WorldWideScience

Sample records for manufacturing systems a-cims academic

  1. Green manufacturing processes and systems

    Energy Technology Data Exchange (ETDEWEB)

    Davim, J. Paulo (ed.) [Aveiro Univ. (Portugal). Dept. of Mechanical Engineering, Campus Universitario de Santiago

    2013-02-01

    This book provides the recent advances on green manufacturing processes and systems for modern industry. Chapter 1 provides information on sustainable manufacturing through environmentally-friendly machining. Chapter 2 is dedicated to environmentally-friendly machining: vegetable based cutting fluids. Chapter 3 describes environmental-friendly joining of tubes. Chapter 4 contains information on concepts, methods and strategies for zero-waste in manufacturing. Finally, chapter 5 is dedicated to the application of hybrid MCDM approach for selecting the best tyre recycling process.

  2. Design and application of reconfigurable manufacturing systems in agile mass customization manufacturing environment.

    CSIR Research Space (South Africa)

    Xing, B

    2007-05-01

    Full Text Available processes. Many manufacturing techniques are based on the principles of Flexible Manufacturing and Dedicated Manufacturing for mass production. Reconfigurable Manufacturing System, (RMS), is a manufacturing system that can provide for Agile Manufacturing...

  3. Aggregate modeling of manufacturing systems

    NARCIS (Netherlands)

    Lefeber, A.A.J.; Armbruster, H.D.; Kempf, K.G.; Keskinocak, P.; Uzsoy, R.

    2011-01-01

    In this chapter we will present three approaches to model manufacturing systems in an aggregate way leading to fast and effective (i.e., scalable) simulations that allow the development of simulation tools for rapid exploration of different production scenarios in a factory as well as in a whole

  4. Aggregate modeling of manufacturing systems

    NARCIS (Netherlands)

    Lefeber, A.A.J.; Armbruster, H.D.

    2007-01-01

    In this report we will present three approaches to model manufacturing systems in an aggregate way leading to fast and effective (i.e., scalable) simulations that allow the development of simulation tools for rapid exploration of different production scenarios in a factory as well as in a whole

  5. Energy Efficiency in Manufacturing Systems

    CERN Document Server

    Thiede, Sebastian

    2012-01-01

    Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require  balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

  6. Advanced optical manufacturing digital integrated system

    Science.gov (United States)

    Tao, Yizheng; Li, Xinglan; Li, Wei; Tang, Dingyong

    2012-10-01

    It is necessarily to adapt development of advanced optical manufacturing technology with modern science technology development. To solved these problems which low of ration, ratio of finished product, repetition, consistent in big size and high precision in advanced optical component manufacturing. Applied business driven and method of Rational Unified Process, this paper has researched advanced optical manufacturing process flow, requirement of Advanced Optical Manufacturing integrated System, and put forward architecture and key technology of it. Designed Optical component core and Manufacturing process driven of Advanced Optical Manufacturing Digital Integrated System. the result displayed effective well, realized dynamic planning Manufacturing process, information integration improved ratio of production manufactory.

  7. Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example

    Directory of Open Access Journals (Sweden)

    Wu Mingtao

    2017-01-01

    Full Text Available CyberManufacturing System is a vision for future manufacturing where physical components are fully integrated with computational processes in a connected environment. However, realizing the vision requires that its security be adequately ensured. This paper presents a vision-based system to detect intentional attacks on additive manufacturing processes, utilizing machine learning techniques. Particularly, additive manufacturing systems have unique vulnerabilities to malicious attacks, which can result in defective infills but without affecting the exterior. In order to detect such infill defects, the research uses simulated 3D printing process images as well as actual 3D printing process images to compare accuracies of machine learning algorithms in classifying, clustering and detecting anomalies on different types of infills. Three algorithms - (i random forest, (ii k nearest neighbor, and (iii anomaly detection - have been adopted in the research and shown to be effective in detecting such defects.

  8. Pellet to Part Manufacturing System for CNCs

    Energy Technology Data Exchange (ETDEWEB)

    Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chesser, Phillip C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lloyd, Peter D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bandari, Yashwanth Kumar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jones, Jason [Hybrid Manufacturing Technologies, Swadlincote (United Kingdom); Gaul, Katherine T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2018-03-14

    Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with Hybrid Manufacturing Technologies to develop a compact prototype composite additive manufacturing head that can effectively extrude injection molding pellets. The head interfaces with conventional CNC machine tools enabling rapid conversion of conventional machine tools to additive manufacturing tools. The intent was to enable wider adoption of Big Area Additive Manufacturing (BAAM) technology and combine BAAM technology with conventional machining systems.

  9. Organizing for manufacturing innovation. The case of Flexible Manufacturing Systems

    DEFF Research Database (Denmark)

    Boer, Harry; Krabbendam, Koos

    1992-01-01

    addressing the manufacturing innovation process are even fewer and provide little insight into its true nature. Consequently, little is known about the effective organization of such processes. In the present article an organization model of manufacturing innovation is described, and its practicability...... the implementation of new technology effectively. This is not surprising, considering the innovative nature of this process. Although there is a host of literature on innovation, organization and (the benefits of) new technology, the literature in which these areas are linked together is scarce. Publications...... assessed using the results of seven case studies of the implementation of flexible manufacturing systems in British, Belgian and Dutch mechanical engineering companies....

  10. Recent development of cellular manufacturing systems

    Indian Academy of Sciences (India)

    be manufactured in a cell, and the machines, which will comprise that cell, can be ... approaches for the CF problem which is referred to as Production Flow Analysis (PFA). ... programming model of cellular manufacturing system design which ...

  11. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  12. Detailed design of product oriented manufacturing systems

    OpenAIRE

    Silva, Sílvio Carmo; Alves, Anabela Carvalho

    2006-01-01

    This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

  13. Measure of manufacturing performance in advanced manufacturing systems

    NARCIS (Netherlands)

    Ron, de A.J.

    1995-01-01

    Because of the financial risks as a result of the high investments, decisions concerning investing in advanced manufacturing systems are difficult. The difficulty to decide is gained by the lack of a well-defined measure to support decisions and alarming messages from the industry concerning inverse

  14. Literature Review on Dynamic Cellular Manufacturing System

    Science.gov (United States)

    Nouri Houshyar, A.; Leman, Z.; Pakzad Moghadam, H.; Ariffin, M. K. A. M.; Ismail, N.; Iranmanesh, H.

    2014-06-01

    In previous decades, manufacturers faced a lot of challenges because of globalization and high competition in markets. These problems arise from shortening product life cycle, rapid variation in demand of products, and also rapid changes in manufcaturing technologies. Nowadays most manufacturing companies expend considerable attention for improving flexibility and responsiveness in order to overcome these kinds of problems and also meet customer's needs. By considering the trend toward the shorter product life cycle, the manufacturing environment is towards manufacturing a wide variety of parts in small batches [1]. One of the major techniques which are applied for improving manufacturing competitiveness is Cellular Manufacturing System (CMS). CMS is type of manufacturing system which tries to combine flexibility of job shop and also productivity of flow shop. In addition, Dynamic cellular manufacturing system which considers different time periods for the manufacturing system becomes an important topic and attracts a lot of attention to itself. Therefore, this paper made attempt to have a brief review on this issue and focused on all published paper on this subject. Although, this topic gains a lot of attention to itself during these years, none of previous researchers focused on reviewing the literature of that which can be helpful and useful for other researchers who intend to do the research on this topic. Therefore, this paper is the first study which has focused and reviewed the literature of dynamic cellular manufacturing system.

  15. Cyber physical systems role in manufacturing technologies

    Science.gov (United States)

    Al-Ali, A. R.; Gupta, Ragini; Nabulsi, Ahmad Al

    2018-04-01

    Empowered by the recent development in single System-on-Chip, Internet of Things, and cloud computing technologies, cyber physical systems are evolving as a major controller during and post the manufacturing products process. In additional to their real physical space, cyber products nowadays have a virtual space. A product virtual space is a digital twin that is attached to it to enable manufacturers and their clients to better manufacture, monitor, maintain and operate it throughout its life time cycles, i.e. from the product manufacturing date, through operation and to the end of its lifespan. Each product is equipped with a tiny microcontroller that has a unique identification number, access code and WiFi conductivity to access it anytime and anywhere during its life cycle. This paper presents the cyber physical systems architecture and its role in manufacturing. Also, it highlights the role of Internet of Things and cloud computing in industrial manufacturing and factory automation.

  16. Manufacturing and sustainability of bonding systems for grinding tools

    OpenAIRE

    Linke, B

    2016-01-01

    © 2016, German Academic Society for Production Engineering (WGP). Grinding and honing processes are quality-defining operations in the production of many modern products. Process performance and product quality are contingent on selecting the correct abrasive tool for a specific application. Thus, tools with different bonding systems are used, namely resin bonded tools, vitrified bonded tools, and metallic bonded tools. Tool manufacturers have great knowledge in the choice and intricate prod...

  17. A Process Management System for Networked Manufacturing

    Science.gov (United States)

    Liu, Tingting; Wang, Huifen; Liu, Linyan

    With the development of computer, communication and network, networked manufacturing has become one of the main manufacturing paradigms in the 21st century. Under the networked manufacturing environment, there exist a large number of cooperative tasks susceptible to alterations, conflicts caused by resources and problems of cost and quality. This increases the complexity of administration. Process management is a technology used to design, enact, control, and analyze networked manufacturing processes. It supports efficient execution, effective management, conflict resolution, cost containment and quality control. In this paper we propose an integrated process management system for networked manufacturing. Requirements of process management are analyzed and architecture of the system is presented. And a process model considering process cost and quality is developed. Finally a case study is provided to explain how the system runs efficiently.

  18. Simulation approach towards energy flexible manufacturing systems

    CERN Document Server

    Beier, Jan

    2017-01-01

    This authored monograph provides in-depth analysis and methods for aligning electricity demand of manufacturing systems to VRE supply. The book broaches both long-term system changes and real-time manufacturing execution and control, and the author presents a concept with different options for improved energy flexibility including battery, compressed air and embodied energy storage. The reader will also find a detailed application procedure as well as an implementation into a simulation prototype software. The book concludes with two case studies. The target audience primarily comprises research experts in the field of green manufacturing systems. .

  19. Qualification of academic facilities for small-scale automated manufacture of autologous cell-based products.

    Science.gov (United States)

    Hourd, Paul; Chandra, Amit; Alvey, David; Ginty, Patrick; McCall, Mark; Ratcliffe, Elizabeth; Rayment, Erin; Williams, David J

    2014-01-01

    Academic centers, hospitals and small companies, as typical development settings for UK regenerative medicine assets, are significant contributors to the development of autologous cell-based therapies. Often lacking the appropriate funding, quality assurance heritage or specialist regulatory expertise, qualifying aseptic cell processing facilities for GMP compliance is a significant challenge. The qualification of a new Cell Therapy Manufacturing Facility with automated processing capability, the first of its kind in a UK academic setting, provides a unique demonstrator for the qualification of small-scale, automated facilities for GMP-compliant manufacture of autologous cell-based products in these settings. This paper shares our experiences in qualifying the Cell Therapy Manufacturing Facility, focusing on our approach to streamlining the qualification effort, the challenges, project delays and inefficiencies we encountered, and the subsequent lessons learned.

  20. Reconfigurable manufacturing system for agile mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2006-07-01

    Full Text Available Manufacturing companies are facing three challenges: low cost production of product, high quality standard and rapid responsiveness to customer requirements. These three goals are equally important for the manufacturing companies who want...

  1. All-Embracing Manufacturing Roadmap System

    CERN Document Server

    Halevi, Gideon

    2012-01-01

    All-embracing manufacturing is a system that aims to dissolve the complexity of the manufacturing process and restore the inherent simplicity. It claims that production is very simple and flexible by nature. However, the complexity is a result of the production system approach which makes it rigid and therefore complex. All-embracing manufacturing introduces flexibility to production planning, it eliminates constraints, bottlenecks, and disruptions automatically while it restores the simplicity. No decision is made ahead of time, but only at the time of execution. It introduces technology as dominant part of manufacturing. It is a computer oriented system that imitates human behavior i.e. practically as any of us behave in daily personal life.

  2. Collaborative Cloud Manufacturing: Design of Business Model Innovations Enabled by Cyberphysical Systems in Distributed Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Erwin Rauch

    2016-01-01

    Full Text Available Collaborative cloud manufacturing, as a concept of distributed manufacturing, allows different opportunities for changing the logic of generating and capturing value. Cyberphysical systems and the technologies behind them are the enablers for new business models which have the potential to be disruptive. This paper introduces the topics of distributed manufacturing as well as cyberphysical systems. Furthermore, the main business model clusters of distributed manufacturing systems are described, including collaborative cloud manufacturing. The paper aims to provide support for developing business model innovations based on collaborative cloud manufacturing. Therefore, three business model architecture types of a differentiated business logic are discussed, taking into consideration the parameters which have an influence and the design of the business model and its architecture. As a result, new business models can be developed systematically and new ideas can be generated to boost the concept of collaborative cloud manufacturing within all sustainable business models.

  3. Expert system for designing the manufacturing conditions

    International Nuclear Information System (INIS)

    Henin, F.

    1990-01-01

    The expert system TOTEM (French acronym for Material and Time Optimal Processing), used in computer aided manufacturing, is presented. The flow chart describing the TOTEM operation principles is given. The calculation rules which allow the optimization of the fabrication means are summarized. The steps of the TOTEM operations and an application example are included. TOTEM allows the standardization of the manufacturing specifications and takes into account technological improvements [fr

  4. Implementing lean manufacturing system: ISM approach

    Directory of Open Access Journals (Sweden)

    Naveen Kumar

    2013-09-01

    Full Text Available Purpose: Lean Manufacturing System has emerged as an important area of research in Indian context. The requirement of Lean Manufacturing has increased due to defects in products (semi finished and finished and subsequent increase in cost. In this context, this study is an attempt to develop a structural model of the variables, important to implement Lean Manufacturing System in Indian automobile industry. Design/Methodology/Approach: Various variables of lean manufacturing system implementation have been identified from literature review and experts’ opinions. Contextual relationship among these identified variables has been set after carrying out brainstorming session. Further, classification of the variables has been carried out based upon the driving power and dependence. In addition to this, a structural model of variables to implement lean concept in Indian automobile industry has also been developed using Interpretive Structural Modeling (ISM technique. Questionnaire based survey has also been conducted to rank these variables. Findings: Eighteen variables have been identified from the literature and subsequent discussions with experts. Out of which, nine variables have been identified as dependent and nine variables have been identified as driver. No variable has been identified as linkage variable and autonomous variable. From the model developed, ‘Relative cost benefits’ has been identified as top level dependent variable and top management commitment as bottom level most independent variable. Research limitations/Implications: The model so developed is a hypothetical model based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation. Practical implication: Clear understanding of interactions among these variables will help organizations to prioritize and manage these variables more effectively and efficiently to draw advantage from lean manufacturing system implementation

  5. A Review of Decisions Support Systems for Manufacturing Systems

    OpenAIRE

    Felsberger, Andreas; Oberegger, Bernhard; Reiner, Gerald

    2017-01-01

    In the field of manufacturing systems automated data acquisition and development of technological innovations like manufacturing execution systems (MES), Enterprise Resource Planning (ERP), Advanced Planning Systems (APS) and new trends in Big Data and Business Intelligence (BI) have given rise to new applications and methods of existing decisionsupport technologies. Today manufacturers need an adaptive system that helps to react and adapt to the constantly changing business environment. The ...

  6. Flow Battery System Design for Manufacturability.

    Energy Technology Data Exchange (ETDEWEB)

    Montoya, Tracy Louise; Meacham, Paul Gregory; Perry, David; Broyles, Robin S.; Hickey, Steven; Hernandez, Jacquelynne

    2014-10-01

    Flow battery energy storage systems can support renewable energy generation and increase energy efficiency. But, presently, the costs of flow battery energy storage systems can be a significant barrier for large-scale market penetration. For cost- effective systems to be produced, it is critical to optimize the selection of materials and components simultaneously with the adherence to requirements and manufacturing processes to allow these batteries and their manufacturers to succeed in the market by reducing costs to consumers. This report analyzes performance, safety, and testing requirements derived from applicable regulations as well as commercial and military standards that would apply to a flow battery energy storage system. System components of a zinc-bromine flow battery energy storage system, including the batteries, inverters, and control and monitoring system, are discussed relative to manufacturing. The issues addressed include costs and component availability and lead times. A service and support model including setup, maintenance and transportation is outlined, along with a description of the safety-related features of the example flow battery energy storage system to promote regulatory and environmental, safety, and health compliance in anticipation of scale manufacturing.

  7. Ubiquitous Robotic Technology for Smart Manufacturing System.

    Science.gov (United States)

    Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

    2016-01-01

    As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

  8. Reconfigurable Manufacturing System Design and Implementation

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne

    2013-01-01

    is meant primarily to show the physical feasibility of the system and provide a first-look into a real production application of the RMS ideas. The purpose of this paper is to present the design of the manufacturer’s RMS proof of concept, its implementation, and evaluation results.......Reconfigurable Manufacturing Systems (RMS) have been an increasing area of interest in the research arena. However, it seems that current literature is lacking application and implementation cases where RMS are simulated, tested, and evaluated as a feasible manufacturing concept. A Manufacturer...... of Consumer Goods identified the potential of the RMS concept and decided to investigate the concept in a real production installation. The result of this development is a proof of concept of a changeable and reconfigurable assembly and decoration system based on the principles of RMS. This proof of concept...

  9. Gamified Android Based Academic Information System

    Science.gov (United States)

    Setiana, Henry; Hansun, Seng

    2017-01-01

    Student is often lazy when it comes to studying, and how to motivate student was one of the problem in the educational world. To overcome the matters, we will implement the gamification method into an Academic Information System. Academic Information System is a software used for providing information and arranging administration which connected…

  10. Designing cellular manufacturing system under risk conditions ...

    African Journals Online (AJOL)

    This paper develops a mathematical modeling to design a cellular manufacturing system. In addition some of the total or portion of the demand of the part types can be subcontracted.. In order to designing the optimal CMS, we needs to detrmined a plan to produce and subcontract parts at a minimum cost and to mitigate the ...

  11. ACADEMIC MOTIVATION FOR BUSINESS INFORMATION SYSTEMS STUDENTS

    Directory of Open Access Journals (Sweden)

    Catalin Maican

    2015-05-01

    Full Text Available Academic Motivation Scale (AMS was applied to Business Information Systems students for finding out their reasons and motives for enrolling this academic field, for undergraduate and postgraduate academic cycles. The students were presented the AMS scale translated in Romanian, together with other questionnaires. The first part of the paper makes a short introduction to AMS, the second describes its objectives, while the third presents the results.

  12. ACADEMIC MOTIVATION FOR BUSINESS INFORMATION SYSTEMS STUDENTS

    OpenAIRE

    Catalin Maican; Radu Lixandroiu

    2015-01-01

    Academic Motivation Scale (AMS) was applied to Business Information Systems students for finding out their reasons and motives for enrolling this academic field, for undergraduate and postgraduate academic cycles. The students were presented the AMS scale translated in Romanian, together with other questionnaires. The first part of the paper makes a short introduction to AMS, the second describes its objectives, while the third presents the results.

  13. Chinese Academic Assessment and Incentive System.

    Science.gov (United States)

    Suo, Qinghui

    2016-02-01

    The Chinese academic assessment and incentive system drew mixed responses from academia. In the essay the author tried to explain why the current assessment system is appropriate in China and an opportunistic behavior in Chinese academia is exposed.

  14. Research of Manufacture Time Management System Based on PLM

    Science.gov (United States)

    Jing, Ni; Juan, Zhu; Liangwei, Zhong

    This system is targeted by enterprises manufacturing machine shop, analyzes their business needs and builds the plant management information system of Manufacture time and Manufacture time information management. for manufacturing process Combined with WEB technology, based on EXCEL VBA development of methods, constructs a hybrid model based on PLM workshop Manufacture time management information system framework, discusses the functionality of the system architecture, database structure.

  15. Global drivers, sustainable manufacturing and systems ergonomics.

    Science.gov (United States)

    Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

    2015-11-01

    This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

  16. Real time PV manufacturing diagnostic system

    Energy Technology Data Exchange (ETDEWEB)

    Kochergin, Vladimir [MicroXact Inc., Blacksburg, VA (United States); Crawford, Michael A. [MicroXact Inc., Blacksburg, VA (United States)

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  17. A Grid Architecture for Manufacturing Database System

    Directory of Open Access Journals (Sweden)

    Laurentiu CIOVICĂ

    2011-06-01

    Full Text Available Before the Enterprise Resource Planning concepts business functions within enterprises were supported by small and isolated applications, most of them developed internally. Yet today ERP platforms are not by themselves the answer to all organizations needs especially in times of differentiated and diversified demands among end customers. ERP platforms were integrated with specialized systems for the management of clients, Customer Relationship Management and vendors, Supplier Relationship Management. They were integrated with Manufacturing Execution Systems for better planning and control of production lines. In order to offer real time, efficient answers to the management level, ERP systems were integrated with Business Intelligence systems. This paper analyses the advantages of grid computing at this level of integration, communication and interoperability between complex specialized informatics systems with a focus on the system architecture and data base systems.

  18. Reconfigurability of behavioural specifications for manufacturing systems

    Science.gov (United States)

    Schmidt, Klaus Werner

    2017-12-01

    Reconfigurable manufacturing systems (RMS) support flexibility in the product variety and the configuration of the manufacturing system itself in order to enable quick adjustments to new products and production requirements. As a consequence, an essential feature of RMS is their ability to rapidly modify the control strategy during run-time. In this paper, the particular problem of changing the specified operation of a RMS, whose logical behaviour is modelled as a finite state automaton, is addressed. The notion of reconfigurability of specifications (RoS) is introduced and it is shown that the stated reconfiguration problem can be formulated as a controlled language convergence problem. In addition, algorithms for the verification of RoS and the construction of a reconfiguration supervisor are proposed. The supervisor is realised in a modular way which facilitates the extension by new configurations. Finally, it is shown that a supremal nonblocking and controllable strict subautomaton of the plant automaton that fulfils RoS exists in case RoS is violated for the plant automaton itself and an algorithm for the computation of this strict subautomaton is presented. The developed concepts and results are illustrated by a manufacturing cell example.

  19. ACADEMIC INTEGRITY SUPPORT SYSTEM FOR UKRAINIAN UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    V. G. Sherstjuk

    2017-04-01

    Full Text Available Purpose. Developing the methodology for providing academic integrity in the university. The methodology is based on Web-oriented academic integrity support system, developed by the authors, which enters into the information system of learning process control. Academic integrity support system is aimed at maintaining academic integrity as a basic institutional value, which will help to reduce corruption, plagiarism and other types of academic dishonesty. Methodology. The methodology of problem to solve is based on the development of the information system of education process control with the integral elements of quality control. The information subsystem of academic integrity support is its basic part. Findings. The proposed information system allows us to fulfill the following levels: educational process monitoring; audit of internal processes, which is necessary for developing the effective quality control system; assessment of achievements of educational process participants; formalization of the interaction of educational process participants. The system is aimed at the development of new academic society based on the following principles: open access to the information, at which the access of wide audience to the information provides participation, forming the sense of responsibility and social control; transparency of the information, by which its relevance, quality, reliability are meant; responsibility of all members of educational process; measurability, at which any action in educational process should be measured; detail of describing the actions, results and processes; support, which is meant by automatic tools of the realization of the principles of open access to the information, transparency of the information, responsibility of all participants of educational process, measurability, detail, support. The practical realization of information system is based on the development of a common repository of university information. The

  20. Manufacturing Bms/Iso System Review

    Science.gov (United States)

    Gomez, Yazmin

    2004-01-01

    The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

  1. Process and control systems for composites manufacturing

    Science.gov (United States)

    Tsiang, T. H.; Wanamaker, John L.

    1992-01-01

    A precise control of composite material processing would not only improve part quality, but it would also directly reduce the overall manufacturing cost. The development and incorporation of sensors will help to generate real-time information for material processing relationships and equipment characteristics. In the present work, the thermocouple, pressure transducer, and dielectrometer technologies were investigated. The monitoring sensors were integrated with the computerized control system in three non-autoclave fabrication techniques: hot-press, self contained tool (self heating and pressurizing), and pressure vessel). The sensors were implemented in the parts and tools.

  2. Robot Skills for Transformable Manufacturing Systems

    DEFF Research Database (Denmark)

    Pedersen, Mikkel Rath

    Efficient, transformable production systems need robots that are flexible and effortlessly repurposed or reconfigured. The present dissertation argues that this can be achieved through the implementation and use of general, object-centered robot skills. In this dissertation, we focus on the design...... autonomously, exactly when it is needed. It is the firm belief of this researcher that industrial robotics need to go in a direction towards what is outlined in this dissertation, both in academia and in the industry. In order for manufacturing companies to remain competitive, robotics is the definite way...

  3. Reconfigurable manufacturing execution system for pipe cutting

    Science.gov (United States)

    Yin, Y. H.; Xie, J. Y.

    2011-08-01

    This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

  4. Design and Evaluation of a Reconfigurable Manufacturing System

    DEFF Research Database (Denmark)

    Zhang, Shuai; Li, Yang; Bilberg, Arne

    2014-01-01

    In modern manufacturing industry, reconfigurable manufacturing system (RMS) is a promising concept in the research arena. A new RMS system structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to improve its production efficiency. This article shows...... implemented in this consumer goods manufacturer can be effectively (re)configured as part of the daily operations, and the configuration is analyzed by computer simulation before release. Flexibility can be increased considerably meanwhile the system can maintain an acceptable productivity....

  5. Performance analysis of manufacturing systems : queueing approximations and algorithms

    NARCIS (Netherlands)

    Vuuren, van M.

    2007-01-01

    Performance Analysis of Manufacturing Systems Queueing Approximations and Algorithms This thesis is concerned with the performance analysis of manufacturing systems. Manufacturing is the application of tools and a processing medium to the transformation of raw materials into finished goods for sale.

  6. The manufacturing docile bodies in the Brazilian post-graduation: scene in the academic productivism

    Directory of Open Access Journals (Sweden)

    Anderson Luis da Paixão Café

    2017-05-01

    Full Text Available http://dx.doi.org/10.5007/1518-2924.2017v22n49p75 It deals with the banal productivism that took possession of minds and bodies in the Brazilian graduate. To address the issue, appealed to the theoretical concepts of Michel Foucault is one of the great French intellectuals who devoted himself to studies related to knowledge, power and ethics, questioning the roles played by different social institutions in bodies of disciplining those who they were placed in these places by imposing standards of conduct. The objective of this work is to show how each of disciplining techniques of bodies worked in Foucault's perspective, confirms to the emergence of distortions, including ethics, in the construction and dissemination of scientific knowledge process. To achieve this goal developed a bibliographical and exploratory research, associating the cloistered techniques quadriculamento, time control, normalizing sanction, exercise and take to the academic-scientific practices experienced by teachers and students in the Brazilian graduate. The results showed, among other things, that there is still a strong predominance of punitive evaluation at the expense of training when assessing the performance of the bodies in graduate programs. Finally, closes the article in the hope of contributing to broaden discussions about the current movement of manufacturing docile bodies in Brazilian graduate, helping to encourage academics to think new escape routes that make the most creative graduate, innovative and ethical, allowing bodies that it operates live life as a true work of art, that is, without the need to practice intellectual impostures as a form of academic survival.

  7. Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

    Science.gov (United States)

    Le, Thanh; Tang, Kam Ki

    2015-01-01

    This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

  8. SYSTEM FOR THE ACADEMIC INVESTIGATION

    Directory of Open Access Journals (Sweden)

    Laura Leticia Laurent Martinez

    2006-11-01

    Full Text Available Generally, documental research depends on written bibliographical note cards that help find important text for a given research.However, the manual search for frequently used data such as author, publisher, topic, gets complicated as records increase resulting in a time consuming process that hinders the desired brainstorming.The software here presented solves two main issues: it allows a smoother and quicker data entry, and the flexibility to search by multiple criteria matching information for a specific author, publisher, topic, subtopic and date.The software also eases text transcription and builds the documental references that will be cited on research papers.The software is based on the object oriented (OO programming philosophy using Microsoft Access as a widely used relational database system.

  9. Analysis of Additive Manufacturing for Sustainment of Naval Aviation Systems

    Science.gov (United States)

    2017-09-01

    decline and allow manufacturers to explore alternative product designs and supply processes at lower risk. If the aerospace and defense industry...C. SYSTEMS ENGINEERING AND ADDITIVE MANUFACTURING During the design and development of new products or systems, engineers must consider the...Bradford L., and Vhance V. Valencia. 2017. “3D-Printing Design Using Systems Engineering.” In Additive Manufacturing Handbook: Product Development for the

  10. Identifying bottlenecks in manufacturing systems using stochastic criticality analysis

    NARCIS (Netherlands)

    Nogueira Bastos, J.P.; van der Sanden, L.J.; Donk, O.; Voeten, J.P.M.; Stuijk, S.; Schiffelers, R.R.H.; Corporaal, H.

    2018-01-01

    System design is a difficult process with many design-choices for which the impact may be difficult to foresee. Manufacturing system design is no exception to this. Increased use of flexible manufacturing systems which are able to perform different operations/use-cases further raises the design

  11. Algorithms for Academic Search and Recommendation Systems

    DEFF Research Database (Denmark)

    Amolochitis, Emmanouil

    2014-01-01

    are part of a developed Movie Recommendation system, the first such system to be commercially deployed in Greece by a major Triple Play services provider. In the third part of the work we present the design of a quantitative association rule mining algorithm. The introduced mining algorithm processes......In this work we present novel algorithms for academic search, recommendation and association rules mining. In the first part of the work we introduce a novel hierarchical heuristic scheme for re-ranking academic publications. The scheme is based on the hierarchical combination of a custom...... implementation of the term frequency heuristic, a time-depreciated citation score and a graph-theoretic computed score that relates the paper’s index terms with each other. On the second part we describe the design of hybrid recommender ensemble (user, item and content based). The newly introduced algorithms...

  12. Open manufacturing system using MMS service and object oriented manufacturing equipment

    International Nuclear Information System (INIS)

    Kim, Dong Hoon; Song, Jun Yeob; Kim, Sun Ho

    2007-01-01

    Manufacturing equipment should be integrated to construct CIM (Computer Integrated Manufacturing) environment, but several economical and technological difficulties may be arisen in case heterogeneous systems are integrated into each other. MMS (Manufacturing Message Specification) can be effective in such a case, but the problem is that MMS-related products are comparatively expensive and the existing manufacturing equipment mostly do not support MMS. This study was focused on developing a gateway suitable to a non-MMS-compatible CNC machine-tool, and on implementing OSI (Open System Interconnection) upper layer on TCP/IP. The development system was applied to a cell controller by means of heterogeneous equipment under CIM environment, and to evaluate interoperability and portability

  13. Integration and test plans for complex manufacturing systems

    NARCIS (Netherlands)

    Boumen, R.

    2007-01-01

    The integration and test phases that are part of the development and manufacturing of complex manufacturing systems are costly and time consuming. As time-to-market is becoming increasingly important, it is crucial to keep these phases as short as possible, whilemaintaining system quality. This is

  14. Revisiting System Paradigms from the Viewpoint of Manufacturing Sustainability

    Directory of Open Access Journals (Sweden)

    Zhuming Bi

    2011-08-01

    Full Text Available A system paradigm is an abstract representation of system; it includes system architecture used to determine the types and numbers of components and their relations in the system. The design of system paradigm relies on customers’ requirements and the characteristics of the manufacturing environment. Many system paradigms and design guidelines have been proposed for a variety of customers’ needs including functions, cost, quality, personalization, and lead time of products. However, the consideration of sustainability becomes essential to today’s manufacturing systems; a new challenge is how to evolve existing paradigms to accommodate the requirements of sustainability. In contrast to ample research activities on system paradigms in past decades, recent studies on system paradigms have been restricted, partially due to unclear research directions. Limited works can be found on conceiving new manufacturing system paradigms from the perspective of sustainability; most of the related literature concerns the new requirements of sustainability. The objectives of this work are (i to examine the requirements of manufacturing systems in a wider scope; (ii to revisit existing paradigms to clarify their limitations and bottlenecks; and eventually (iii to identify some research directions, which will lead to a solution of sustainable manufacturing. To achieve these objectives, firstly, a brief description of today’s manufacturing environment is provided. Secondly, the requirements of sustainability are discussed, and the relevant researches on system sustainability are surveyed. Thirdly, the reconfigurable system paradigm is focused, and the gaps between a reconfigurable manufacturing system and a sustainable manufacturing system are discussed. Finally, the future endeavors towards to the next-generation manufacturing system paradigms are discussed.

  15. Designing a Free Academic Early Alert System

    OpenAIRE

    Adam C Welch; Adam Greever; Carmen Linne

    2016-01-01

    This manuscript describes the development and implementation of a cloud-based, academic early alert system using Google Sheets. It was written for a non-computer savvy person to be able to develop the early alert system. By creating a Master Sheet and using the syntax from the share function of Google Sheets, a unique sheet can be created for each advisor that limits information sharing of their specific advisees. By adding a Google Form to the sheet, advisor interventions can be captured tha...

  16. Future manufacturing systems : towards the extended enterprise

    NARCIS (Netherlands)

    Browne, J.; Sackett, P.J.; Wortmann, J.C.

    1995-01-01

    Manufacturing research has been focused on point solutions and technology-driven solutions. These have not delivered the step changes in performance needed, nor have they been adopted by wide sections of industry so the total business benefit resulting has been modest. The authors propose that

  17. Mechatronic sensory system for computer integrated manufacturing

    CSIR Research Space (South Africa)

    Kumile, CM

    2007-05-01

    Full Text Available . The framework has been created that defines a formalisation of shop-floor control using sensors previously missing in manufacturing research. The contribution is in the ease and the elegance that the concept provides finite state/ automata activities as well...

  18. Layout design optimization of dynamic environment flexible manufacturing systems

    Directory of Open Access Journals (Sweden)

    Jaber Abu Qudeiri

    2015-06-01

    Full Text Available The proper positioning of machine tools in flexible manufacturing system is one of the factors that lead to increase in production efficiency. Choosing the optimum position of machine tools curtails the total part handling cost between machine tools within the flexible manufacturing system. In this article, a two-stage approach is presented to investigate the best locations of the machine tools in flexible manufacturing system. The location of each machine tool is selected from the available specific and fixed locations in such a way that it will result in best throughput of the flexible manufacturing system. In the first stage of the two-stage approach, the throughput of randomly selected locations of the machine tool in flexible manufacturing system is computed by proposing a production simulation system. The production simulation system utilizes genetic algorithms to find the locations of the machine tools in flexible manufacturing system that achieve the maximum throughput of the flexible manufacturing system. In the second stage, the generated locations are fed into artificial neural network to find a relation between a machine tool’s location and the throughput that can be used to predict the throughput for any other set of locations. Artificial neural network will result in mitigating the computational time.

  19. Systems engineering management process maturity of South African manufacturing organisations

    CSIR Research Space (South Africa)

    Lemberger, ID

    2014-07-01

    Full Text Available to integrate people, processes and technologies to deliver innovative complex systems. The investigation set out to improve the understanding of systems engineering (SE) with focus on organisations in manufacturing of coke, petroleum, chemical products, rubber...

  20. Acceptance of enterprise resource planning systems by small manufacturing enterprises

    CSIR Research Space (South Africa)

    Adam, R

    2011-06-01

    Full Text Available systems by small enterprises. This paper addresses this gap by considering the strategic, business, technical and human factors that influence the acceptance of ERP systems in small manufacturing enterprises in South Africa. The consultative list...

  1. Empirical study on entropy models of cellular manufacturing systems

    Institute of Scientific and Technical Information of China (English)

    Zhifeng Zhang; Renbin Xiao

    2009-01-01

    From the theoretical point of view,the states of manufacturing resources can be monitored and assessed through the amount of information needed to describe their technological structure and operational state.The amount of information needed to describe cellular manufacturing systems is investigated by two measures:the structural entropy and the operational entropy.Based on the Shannon entropy,the models of the structural entropy and the operational entropy of cellular manufacturing systems are developed,and the cognizance of the states of manufacturing resources is also illustrated.Scheduling is introduced to measure the entropy models of cellular manufacturing systems,and the feasible concepts of maximum schedule horizon and schedule adherence are advanced to quantitatively evaluate the effectiveness of schedules.Finally,an example is used to demonstrate the validity of the proposed methodology.

  2. Online scheduling of 2-re-entrant flexible manufacturing systems

    NARCIS (Netherlands)

    Pinxten, J. van; Waqas, U.; Geilen, M.; Basten, T.; Somers, L.

    2017-01-01

    Online scheduling of operations is essential to optimize productivity of flexible manufacturing systems (FMSs) where manufacturing requests arrive on the fly. An FMS processes products according to a particular flow through processing stations. This work focusses on online scheduling of re-entrant

  3. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

  4. Modeling and Performance Analysis of Manufacturing Systems in ...

    African Journals Online (AJOL)

    Modeling and Performance Analysis of Manufacturing Systems in Footwear Industry. ... researcher to experiment with different variables and controls the manufacturing process ... In this study Arena simulation software is employed to model and measure ... for Authors · for Policy Makers · about Open Access · Journal Quality.

  5. Nonterrestrial material processing and manufacturing of large space systems

    Science.gov (United States)

    Von Tiesenhausen, G.

    1979-01-01

    Nonterrestrial processing of materials and manufacturing of large space system components from preprocessed lunar materials at a manufacturing site in space is described. Lunar materials mined and preprocessed at the lunar resource complex will be flown to the space manufacturing facility (SMF), where together with supplementary terrestrial materials, they will be final processed and fabricated into space communication systems, solar cell blankets, radio frequency generators, and electrical equipment. Satellite Power System (SPS) material requirements and lunar material availability and utilization are detailed, and the SMF processing, refining, fabricating facilities, material flow and manpower requirements are described.

  6. REVIEW OF FLEXIBLE MANUFACTURING SYSTEM BASED ON MODELING AND SIMULATION

    Directory of Open Access Journals (Sweden)

    SAREN Sanjib Kumar

    2016-05-01

    Full Text Available This paper focused on the literature survey of the use of flexible manufacturing system design and operation problems on the basis of simulation tools and their methodology which has been widely used for manufacturing system design and analysis. During this period, simulation has been proving to be an extremely useful analysis and optimization tool, and many articles, papers, and conferences have focused directly on the topic. This paper presents a scenario the use of simulation tools and their methodology in flexible manufacturing system from a period 1982 to 2015.

  7. A MULTI CRITERIA APPROACH TO DESIGNING THE CELLULAR MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    Rika Ampuh Hadiguna

    2005-01-01

    Full Text Available Cellular manufacturing system design problems such as design framework, manufacturing cells layout and layout evaluation. The research objective is developing the framework to designing manufacturing cells with considering the organization and management aspects in shopfloor. In this research have compared the existing layout with proposed layout which applied the multi criteria approach. The proposed method is combining Analytical Hierarchy Process (AHP, Clustering and heuristic approach. The result has show that grouping with Single Linkage Clustering (SLC to be selected as manufacturing cells. The comparison of clustering weight is 0,567, 0,245 and 0,188 for SLC, Complete Linkage Clustering (CLC and Average Linkage Clustering (ALC, respectively. This result shows that generating layout by using grouping result from SLC. The evaluation result shows that types of manufacturing cells better than process layout which used the existing system.

  8. Modeling of Agile Intelligent Manufacturing-oriented Production Scheduling System

    Institute of Scientific and Technical Information of China (English)

    Zhong-Qi Sheng; Chang-Ping Tang; Ci-Xing Lv

    2010-01-01

    Agile intelligent manufacturing is one of the new manufacturing paradigms that adapt to the fierce globalizing market competition and meet the survival needs of the enterprises, in which the management and control of the production system have surpassed the scope of individual enterprise and embodied some new features including complexity, dynamicity, distributivity, and compatibility. The agile intelligent manufacturing paradigm calls for a production scheduling system that can support the cooperation among various production sectors, the distribution of various resources to achieve rational organization, scheduling and management of production activities. This paper uses multi-agents technology to build an agile intelligent manufacturing-oriented production scheduling system. Using the hybrid modeling method, the resources and functions of production system are encapsulated, and the agent-based production system model is established. A production scheduling-oriented multi-agents architecture is constructed and a multi-agents reference model is given in this paper.

  9. Designing a Free Academic Early Alert System

    Directory of Open Access Journals (Sweden)

    Adam C Welch

    2016-10-01

    Full Text Available This manuscript describes the development and implementation of a cloud-based, academic early alert system using Google Sheets. It was written for a non-computer savvy person to be able to develop the early alert system. By creating a Master Sheet and using the syntax from the share function of Google Sheets, a unique sheet can be created for each advisor that limits information sharing of their specific advisees. By adding a Google Form to the sheet, advisor interventions can be captured that reflect interventions made as a result of the early alert sheet. Approximately 52% of students were identified on the early alert sheet by having at least one non-passing score on an exam. There were 35-50% of faculty advisors who documented their interventions in the sheet. The template and coding used to develop this academic early alert sheet may be applied to other central documentation needs, such as professionalism early alert. Conflict of Interest Dr. Welch reports owning stock in Alphabet, Inc, however, was not involved in the selection of Google as the preferred platform at this institution.   Type: Note

  10. Reconfigurable Manufacturing Systems as an Application of Mass Customisation

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Nielsen, Kjeld; Jørgensen, Kaj Asbjørn

    2011-01-01

    Manufacturing systems are today developed as engineer to order solutions tailored to producing a specific product or a limited product mix. Such dedicated systems are not consistent with market demands for rapid product changes, product variety, and customisation, which require flexibility...... and responsiveness of manufacturing systems. A Reconfigurable Manufacturing System (RMS) is aimed at possess such flexibility and responsiveness and is said to be the manufacturing paradigm of tomorrow. RMS is, though, not yet fully developed. A similarity between RMS and modular product families, known from Mass...... Customisation (MC), is seen and based on this similarity a potential to maturing RMS further by applying MC methods and techniques is identified. Based on literature surveys this paper analyses this potential by diagnosing gabs for RMS to succeed as a MC product. For each gab MC theory holds related methods...

  11. Designing modular manufacturing systems using mass customisation theories and methods

    DEFF Research Database (Denmark)

    Jørgensen, Steffen Nordahl; Hvilshøj, Mads; Madsen, Ole

    2012-01-01

    Today, manufacturing systems are developed as engineered to order (ETO) solutions tailored to produce a specific product or a limited product mix. However, such dedicated systems are not consistent with the current market demands for rapid product changes, high product variety, and customisation....... In response, modular manufacturing systems (MMS) are evolving, which are aimed to possess the required responsiveness and to be the manufacturing paradigm of mass customisation (MC). Hereby, MMS brings the development process of manufacturing systems against configured to order (CTO). Up to now, research...... in MMS has primarily focused on potential benefits, basic principles, and enabling technologies, while the approaches of actually designing and creating modular architectures have received less attention. A potential to fill these gaps by applying MC theories and methods is identified based...

  12. The Vulcan Advanced Hybrid Manufacturing System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Made In Space is developing the The Vulcan Advanced Hybrid Manufacturing System (VULCAN) to address NASA's requirement to produce high-strength, high-precision...

  13. Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

    2015-03-01

    This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

  14. Design and manufacturing of mechanical steering system for ...

    African Journals Online (AJOL)

    Design and manufacturing of mechanical steering system for parallel parking, zero turning radius, minimum turning radius with traditional turning. ... of the steering system are designed so as to meet all the configuration of steering system and to be well-matched to the power train, suspension system and body of the car.

  15. Safety Discrete Event Models for Holonic Cyclic Manufacturing Systems

    Science.gov (United States)

    Ciufudean, Calin; Filote, Constantin

    In this paper the expression “holonic cyclic manufacturing systems” refers to complex assembly/disassembly systems or fork/join systems, kanban systems, and in general, to any discrete event system that transforms raw material and/or components into products. Such a system is said to be cyclic if it provides the same sequence of products indefinitely. This paper considers the scheduling of holonic cyclic manufacturing systems and describes a new approach using Petri nets formalism. We propose an approach to frame the optimum schedule of holonic cyclic manufacturing systems in order to maximize the throughput while minimize the work in process. We also propose an algorithm to verify the optimum schedule.

  16. Environmental emissions of SOFC and SPFC system manufacture and disposal

    Energy Technology Data Exchange (ETDEWEB)

    Karakoussis, V.; Leach, M.; Vorst, R. van der; Hart, D.; Lane, J.; Pearson, P.; Kilner, J.

    2000-07-01

    This report gives details of a study using Life Cycle Assessment (LCA) to examine the emissions and wastes produced in the manufacture of solid oxide and solid polymer fuel cells in order to identify any barrier to their commercial acceptance. The background to the study is traced, and the selection and definition of systems for studying are outlined. Life Cycle inventories for manufacture are explored focussing on material and energy inputs and emissions, and inventories and environmental burdens are considered. Potential commercial barriers for fuel cells from the environmental effects of manufacture and end-of-life are discussed, and recommendations for future work are given.

  17. A methodology for Manufacturing Execution Systems (MES) implementation

    Science.gov (United States)

    Govindaraju, Rajesri; Putra, Krisna

    2016-02-01

    Manufacturing execution system is information systems (IS) application that bridges the gap between IS at the top level, namely enterprise resource planning (ERP), and IS at the lower levels, namely the automation systems. MES provides a media for optimizing the manufacturing process as a whole in a real time basis. By the use of MES in combination with the implementation of ERP and other automation systems, a manufacturing company is expected to have high competitiveness. In implementing MES, functional integration -making all the components of the manufacturing system able to work well together, is the most difficult challenge. For this, there has been an industry standard that specifies the sub-systems of a manufacturing execution systems and defines the boundaries between ERP systems, MES, and other automation systems. The standard is known as ISA-95. Although the advantages from the use of MES have been stated in some studies, not much research being done on how to implement MES effectively. The purpose of this study is to develop a methodology describing how MES implementation project should be managed, utilising the support of ISA- 95 reference model in the system development process. A proposed methodology was developed based on a general IS development methodology. The developed methodology were then revisited based on the understanding about the specific charateristics of MES implementation project found in an Indonesian steel manufacturing company implementation case. The case study highlighted the importance of applying an effective requirement elicitation method during innitial system assessment process, managing system interfaces and labor division in the design process, and performing a pilot deployment before putting the whole system into operation.

  18. Utilizing Mass Customization Methods for Modular Manufacturing System Design

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Jacobsen, Alexia; Nielsen, Kjeld

    2011-01-01

    Markets today have become dynamic and demand rapid product changes, product variety, and customized products. In order to operate under and taking advantages of such conditions requires, amongst other aspects, manufacturing processes robust to product changes - a contradiction to traditional...... manufacturing systems developed as dedicated engineer-to-order solutions, tailored to production of a specific product or a limited product assortment. In response, modular manufacturing concepts are evolving, which are aimed at possessing the needed responsiveness and aimed at being the manufacturing paradigm...... of Mass Customization (MC). Research focus has been on the basic principles and enabling technologies, while modular architectures and system design have received less attention. A potential to fill these gaps by applying selected design theories and methods of MC have been seen. Based on a communality...

  19. Manufacturing systems considered as time domain control systems : receding horizon control and observers

    NARCIS (Netherlands)

    Roset, B.J.P.

    2007-01-01

    This thesis considers manufacturing systems and model-based controller design, as well as their combinations. The objective of a manufacturing system is to create products from a selected group of raw materials and semifinished goods. In the field of manufacturing systems control is an important

  20. Future Manufacturing Systems in Norway – Strategy, Architecture and Framework

    OpenAIRE

    Kolla, Sri Sudha Vijay Keshav

    2016-01-01

    This study investigates the suitability of Cyber Physical Systems (CPS) in Norwegian manufacturing industries and its implementation. This study explores the research and innovation needs in Norway which will be given as inputs to Strategic Research Agenda (SRA) 2030 of European Commission to share future manufacturing strategies in Norway. The objectives of the research are to identifying the opportunities and challenges of CPS, developing a feasible reference architecture of CPS which benef...

  1. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  2. Academic Integrity: Information Systems Education Perspective

    Science.gov (United States)

    McHaney, Roger; Cronan, Timothy Paul; Douglas, David E.

    2016-01-01

    Academic integrity receives a great deal of attention in institutions of higher education. Universities and colleges provide specific honor codes or have administrative units to promote good behaviors and resolve dishonesty allegations. Students, faculty, and staff have stakes in maintaining high levels of academic integrity to ensure their…

  3. Research of user access control for networked manufacturing system

    Institute of Scientific and Technical Information of China (English)

    ZHENG Xiao-lin; LEI Yu; CHEN De-ren

    2006-01-01

    An integrated user access control method was proposed to address the issues of security and management in networked manufacturing systems (NMS).Based on the analysis of the security issues in networked manufacturing system,an integrated user access control method composed of role-based access control (RBAC),task-based access control (TBAC),relationship-driven access control (RDAC)and coalition-based access control (CBAC) was proposed,including the hierarchical user relationship model,the reference model and the process model.The elements and their relationships were defined,and the expressions of constraints authorization were given.The extensible access control markup language (XACML) was used to implement this method.This method was used in the networked manufacturing system in the Shaoxing spinning region of China.The results show that the integrated user access control method can reduce the costs of system security maintenance and management.

  4. Research on networked manufacturing system for reciprocating pump industry

    Science.gov (United States)

    Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

    2005-12-01

    Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

  5. Reconfigurable manufacturing systems: Principles, design, and future trends

    Science.gov (United States)

    Koren, Yoram; Gu, Xi; Guo, Weihong

    2018-06-01

    Reconfigurable manufacturing systems (RMSs), which possess the advantages of both dedicated serial lines and flexible manufacturing systems, were introduced in the mid-1990s to address the challenges initiated by globalization. The principal goal of an RMS is to enhance the responsiveness of manufacturing systems to unforeseen changes in product demand. RMSs are costeffective because they boost productivity, and increase the lifetime of the manufacturing system. Because of the many streams in which a product may be produced on an RMS, maintaining product precision in an RMS is a challenge. But the experience with RMS in the last 20 years indicates that product quality can be definitely maintained by inserting in-line inspection stations. In this paper, we formulate the design and operational principles for RMSs, and provide a state-of-the-art review of the design and operations methodologies of RMSs according to these principles. Finally, we propose future research directions, and deliberate on how recent intelligent manufacturing technologies may advance the design and operations of RMSs.

  6. Automotive Manufacturing Assessment System : Volume 1. Master Product Schedules.

    Science.gov (United States)

    1999-11-01

    Volume I is part of a four volume set documenting areas of research resulting from the development of the Automotive Manufacturing Assessment System (AMAS) for the DOT/Transportation Systems Center. AMAS was designed to assist in the evaluation of in...

  7. Design Requirements for Designing Responsive Modular Manufacturing Systems

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Madsen, Ole; Nielsen, Kjeld

    2011-01-01

    Customers demand the newest technologies, newest designs, the ability to customise, high quality, and all this at a low cost. These are trends which challenge the traditional way of operating manufacturing companies, especially in regard to product development and manufacturing. Research...... the needed flexibility and responsiveness, but such systems are not yet fully achieved. From related theory it is known that achieving modular benefits depend on the modular architecture; a modular architecture which must be developed according to the customer needs. This makes production needs a design...... requirement in order to achieve responsiveness and other benefits of modular manufacturing systems (MMS). Due to the complex and interrelated nature of a production system and its surroundings these production needs are complex to identify. This paper presents an analysis framework for identification...

  8. Monitoring system for the quality assessment in additive manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Carl, Volker, E-mail: carl@t-zfp.de [Carl Messtechnik, Thyssenstrasse 183a, 46535 Dinslaken (Germany)

    2015-03-31

    Additive Manufacturing (AM) refers to a process by which a set of digital data -representing a certain complex 3dim design - is used to grow the respective 3dim real structure equal to the corresponding design. For the powder-based EOS manufacturing process a variety of plastic and metal materials can be used. Thereby, AM is in many aspects a very powerful tool as it can help to overcome particular limitations in conventional manufacturing. AM enables more freedom of design, complex, hollow and/or lightweight structures as well as product individualisation and functional integration. As such it is a promising approach with respect to the future design and manufacturing of complex 3dim structures. On the other hand, it certainly calls for new methods and standards in view of quality assessment. In particular, when utilizing AM for the design of complex parts used in aviation and aerospace technologies, appropriate monitoring systems are mandatory. In this respect, recently, sustainable progress has been accomplished by joining the common efforts and concerns of a manufacturer Additive Manufacturing systems and respective materials (EOS), along with those of an operator of such systems (MTU Aero Engines) and experienced application engineers (Carl Metrology), using decent know how in the field of optical and infrared methods regarding non-destructive-examination (NDE). The newly developed technology is best described by a high-resolution layer by layer inspection technique, which allows for a 3D tomography-analysis of the complex part at any time during the manufacturing process. Thereby, inspection costs are kept rather low by using smart image-processing methods as well as CMOS sensors instead of infrared detectors. Moreover, results from conventional physical metallurgy may easily be correlated with the predictive results of the monitoring system which not only allows for improvements of the AM monitoring system, but finally leads to an optimisation of the quality

  9. Modular mechatronic control of reconfigurable manufacturing system for mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2007-01-01

    Full Text Available Manufacturing companies are faced with the challenge of unpredictable, high frequency market changes in both local and international markets. There is a need for greater, more effective responsiveness by manufacturers to change their manufacturing...

  10. KSTAR Helium Refrigeration System Design and Manufacturing

    International Nuclear Information System (INIS)

    Dauguet, P.; Briend, P.; Abe, I.; Fauve, E.; Bernhardt, J.-M.; Andrieu, F.; Beauvisage, J.

    2006-01-01

    The tokamak developed in the KSTAR (Korean Superconducting Tokamak Advanced Research) project makes intensive use of superconducting magnets operated at 4.5 K. The cold components of the KSTAR tokamak require forced flow of supercritical helium for magnets/structure, boiling liquid helium for current leads, and gaseous helium for thermal shields. The cryogenic system will provide stable operation and full automatic control. A three-pressure helium cycle composed of six turbines has been customised design for this project. The '' design '' operating mode results with a system composed of a 9 kW refrigerator (including safety margin) and using gas and liquid storages for mass balancing. During Shot/Standby mode, the heat loads are highly time-dependent. A thermal damper is used to smooth these variations and will allow stable operation. (author)

  11. Academic Training: Toward Sustainable Energy Systems?

    CERN Multimedia

    Françoise Benz

    2006-01-01

    ACADEMIC TRAINING LECTURE SERIES 28, 29, 30, 31 March from 11:00 to 12:00 - Main Auditorium, bldg. 500 Toward Sustainable Energy Systems? F. Tellez / CIEMAT, Madrid, E and D.Martinez / CIEMAT-PSA, Almeria, E Recent work on alternative energies go in the direction of proving the feasibility of solar energy as one of the best alternatives into the future. Europe, as everybody else, has understandably vested interests in insourcing energetic demands as far as affordable. The good news is that solar energy may be its deciding straw, because it has remarkable facilities and projects probing the possibilities of this option. Two european research centers are at the leading edge in this area: ENEA, which is leading 'Archimede', a vast solar array project in Sicily, and CIEMAT, with its Plataforma Solar de Almeria (PSA, www.psa.es), a major solar energy facility at the south of Spain. Both will become basic poles of the planned 'EURO-MED'electricity interconnection, intending to carry solar electricity fro...

  12. Academic Training: Toward Sustainable Energy Systems?

    CERN Multimedia

    Françoise Benz

    2006-01-01

    ACADEMIC TRAINING LECTURE SERIES 28, 29, 30, 31 March from 11:00 to 12:00 - Main Auditorium, bldg. 500 Toward Sustainable Energy Systems? F. Tellez / CIEMAT, Madrid, E and D.Martinez / CIEMAT-PSA, Almeria, E Recent work on alternative energies go in the direction of proving the feasibility of solar energy as one of the best alternatives into the future. Europe, as everybody else, has understandably vested interests in insourcing energetic demands as far as affordable. The good news is that solar energy may be its deciding straw, because it has remarkable facilities and projects probing the possibilities of this option. Two european research centers are at the leading edge in this area: ENEA, which is leading 'Archimede', a vast solar array project in Sicily, and CIEMAT, with its Plataforma Solar de Almeria (PSA, www.psa.es) ,a major solar energy facility at the south of Spain. Both will become basic poles of the planned 'EURO-MED' electricity interconnection, intending to carry solar electricity f...

  13. Chemistry, manufacturing and controls in passive transdermal drug delivery systems.

    Science.gov (United States)

    Goswami, Tarun; Audett, Jay

    2015-01-01

    Transdermal drug delivery systems (TDDS) are used for the delivery of the drugs through the skin into the systemic circulation by applying them to the intact skin. The development of TDDS is a complex and multidisciplinary affair which involves identification of suitable drug, excipients and various other components. There have been numerous problems reported with respect to TDDS quality and performance. These problems can be reduced by appropriately addressing chemistry, manufacturing and controls requirements, which would thereby result in development of robust TDDS product and processes. This article provides recommendations on the chemistry, manufacturing and controls focusing on the unique technical aspects of TDDS.

  14. ASPECTS OF MATHEMATICAL MODELING AND INTERPRETATION OF A MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    Mihaela ALDEA

    2013-05-01

    Full Text Available In the paper developing we started from a model that allows a detailed decoding of causalrelationships and getting the laws that determine the evolution of the phenomenon.The model chosen for the study is a discrete event system applicable to optimize the transport systemused in pottery. In order to simulate the manufacturing process we chose Matlab package that contains pntoollibrary, by which can be realized modeling of analyzed graphs. Since the timings of manufacture are very highand the process simulation is conducted with difficulty, we divided the graph according to the transport system.

  15. Total system for manufacture of nuclear vessels by computer: VECTRON

    International Nuclear Information System (INIS)

    Inagawa, Jin; Ueno, Osamu; Hanai, Yoshiharu; Ohkawa, Isao; Washizu, Hideyuki

    1980-01-01

    VECTRON (Vessel Engineering by Computer Tool and Rapid Operating for the N/C System) is a CAM (Computer Aided Manufacturing) system that has been developed to produce high quality and highly accurate vessels for nuclear power plants and other industrial plants. Outputs of this system are design drawings, manufacturing information and magnetic tapes of the N/C marking machine for vessel shell plates including their attachments. And it can also output information at each stage of designing, marking, cutting, forming and assembling by treating the vessels in three dimensions and by using data filing systems and plotting program for general use. The data filing systems consist of functional and manufacturing data of each part of vessels. This system not only realizes a change from manual work to computer work, but also leads us to improve production engineering and production jigs for safety and high quality. At present, VECTRON is being applied to the manufacture of the shell plates of primary containment vessels in the Kashiwazaki-Kariwa Nuclear Power Station Unit 1 (K-1) and the Fukushima Daini Nuclear Power Station Unit 3 (2F-3), to realize increased productivity. (author)

  16. Achievement report on developing inverse manufacturing system in fiscal 1998; 1998 nendo inverse manufacturing system no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed on a circulating type production system, or an inverse manufacturing system, to minimize the environmental load in the entire life cycle of industrial products from design to manufacturing, maintenance, recovery, and re-utilization. In developing the recycling information system, discussion and extraction were executed on the data to be exchanged between manufacturers and users in the inverse society. A new individual parts history control system was developed. In developing the recycling processing system, a prototype system was evaluated by using hypothetical data, wherein the possibility of improving the recycling processing efficiency and reducing the cost was verified. In addition, trial design was made on a recycling processing plant in consideration of the cost effect to get the future plant image. In fabricating the inverse manufacturing products, a prototype concept model was made for information terminal devices. Development was performed on such elementary technologies as the easy-to-disintegrate structure technology, self-integration connecting structure and environmental hysteresis detection system. (NEDO)

  17. Information Systems Education: The Case for the Academic Cloud

    Science.gov (United States)

    Mew, Lionel

    2016-01-01

    This paper discusses how cloud computing can be leveraged to add value to academic programs in information systems and other fields by improving financial sustainment models for institutional technology and academic departments, relieving the strain on overworked technology support resources, while adding richness and improving pedagogical…

  18. Manufacturing

    Directory of Open Access Journals (Sweden)

    Kovalenko Iaroslav

    2017-04-01

    Full Text Available This article describes a method of in-situ process monitoring in the digital light processing (DLP 3D printer. It is based on the continuous measurement of the adhesion force between printing surface and bottom of a liquid resin bath. This method is suitable only for the bottom-up DPL printers. Control system compares the force at the moment of unsticking of printed layer from the bottom of the tank, when it has the largest value in printing cycle, with theoretical value. Implementation of suggested algorithm can make detection of faults during the printing process possible.

  19. Quality Evaluation in Flexible Manufacturing Systems: A Markovian Approach

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2007-01-01

    to illustrate the applicability of the method. The results of this study suggest a possible approach to investigate the impact of flexibility on product quality and, finally, with extensions and enrichment of the model, may lead to provide production engineers and managers a better understanding of the quality implications and to summarize some general guidelines of operation management in flexible manufacturing systems.

  20. Challenges of using Hospital Information Systems by nurses: comparing academic and non-academic hospitals.

    Science.gov (United States)

    Ahmadian, Leila; Dorosti, Nafise; Khajouei, Reza; Gohari, Sadrieh Hajesmaeel

    2017-06-01

    Hospital Information Systems (HIS) are used for easy access to information, improvement of documentation and reducing errors. Nonetheless, using these systems is faced with some barriers and obstacles. This study identifies the challenges and the obstacles of using these systems in the academic and non-academic hospitals in Kerman. This is a cross-sectional study which was carried out in 2015. The statistical population in this study consisted of the nurses who had been working in the academic and non-academic hospitals in Kerman. A questionnaire consisting of two sections was used. The first section consisted of the demographic information of the participants and the second section comprised 34 questions about the challenges of HIS use. Data were analyzed by the descriptive and statistical analysis (t-test, and ANOVA) using SPSS 19 software. The most common and important challenges in the academic hospitals were about human environment factors, particularly "negative attitude of society toward using HIS". In the non-academic hospitals, the most common and important challenges were related to human factors, and among them, "no incentive to use system" was the main factor. The results of the t-test method revealed that there was a significant relationship between gender and the mean score of challenges related to the organizational environment category in the academic hospitals and between familiarity with HIS and mean score of human environment factors (pinformation systems are the factors related to the human environment and the human factors. The results of this study can bring a good perspective to the policy makers and the managers regarding obstacles of using HISs from the nurses' perspective, so that they can solve their problems and can successfully implement these systems.

  1. Designing and manufacturing of solar imaging and tracking system

    Directory of Open Access Journals (Sweden)

    Mehrdad Hosseini

    2017-11-01

    Full Text Available Abstract – in this study, designing and manufacturing of solar imaging and tracking system in order to research and spectroscopy applications are investigated. The device has the ability to be used as a Telescope, spectroscope, spectrophotometer and spectrohelioscope. The results obtained from this device are used in the various field of research such as absorption spectra of the surface of the sun, transit of planets in front of the sun, Doppler effects, evaluation of the Fraunhofer lines, plot of intensity versus wavelength and studying of Solar Flares. In this research, design and manufacture of the device, along with some of the results, are reported.

  2. Wireless embedded control system for atomically precise manufacturing

    KAUST Repository

    Khan, Yasser; Randall, John N.

    2011-01-01

    This paper will explore the possibilities of implementing a wireless embedded control system for atomically precise manufacturing. The manufacturing process, similar to Scanning Tunneling Microscopy, takes place within an Ultra High Vacuum (UHV) chamber at a pressure of 10-10 torr. In order to create vibration isolation, and to keep internal noise to a minimum, a wireless link inside the UHV chamber becomes essential. We present a MATLAB simulation of the problem, and then demonstrate a hardware scheme between a Gumstix computer and a Linux based laptop for controlling nano-manipulators with three degrees of freedom. © 2011 IEEE.

  3. Wireless embedded control system for atomically precise manufacturing

    KAUST Repository

    Khan, Yasser

    2011-04-01

    This paper will explore the possibilities of implementing a wireless embedded control system for atomically precise manufacturing. The manufacturing process, similar to Scanning Tunneling Microscopy, takes place within an Ultra High Vacuum (UHV) chamber at a pressure of 10-10 torr. In order to create vibration isolation, and to keep internal noise to a minimum, a wireless link inside the UHV chamber becomes essential. We present a MATLAB simulation of the problem, and then demonstrate a hardware scheme between a Gumstix computer and a Linux based laptop for controlling nano-manipulators with three degrees of freedom. © 2011 IEEE.

  4. The manufacture of ZPR dynamic parameter analysis system

    International Nuclear Information System (INIS)

    Chen Huaide

    1992-01-01

    Under the guiding ideology of synthesize to blaze new trails. Utilizing the combination of various technologies, such as modern nuclear detective technology, electronic technology, computer technology, reactor physics experimental technology, and system technology etc., a new type ZPR dynamic parameter analysis system is manufactured. It consists of neutron detector sets, which including BF 3 proportional counter, 3 He proportional counter, fission chamber etc., detector bias supply, amplifier and discriminator, counter and multiplexer, micro-computer-based multifunction multichannel analyzer and system management software etc. The system has been checked and accepted by the group of experts in 1991. After the discussion, it is thought, that the specifications of the system are satisfactory and surpassed the requirement in advance, the overall design is thoughtful, the manufacture technology attains the advanced level of China

  5. BENCHMARKING AND CONFIGURATION OF OPENSOURCE MANUFACTURING EXECUTION SYSTEM (MES APPLICATION

    Directory of Open Access Journals (Sweden)

    Ganesha Nur Laksmana

    2013-05-01

    Full Text Available Information now is an important element to every growing industry in the world. Inorder to keep up with other competitors, endless improvements in optimizing overall efficiency areneeded. There still exist barriers that separate departments in PT. XYZ and cause limitation to theinformation sharing in the system. Open-Source Manufacturing Execution System (MES presentsas an IT-based application that offers wide variety of customization to eliminate stovepipes bysharing information between departments. Benchmarking is used to choose the best Open-SourceMES Application; and Dynamic System Development Method (DSDM is adopted as this workguideline. As a result, recommendations of the chosen Open-Source MES Application arerepresented.Keywords: Manufacturing Execution System (MES; Open Source; Dynamic SystemDevelopment Method (DSDM; Benchmarking; Configuration

  6. The manufacture of ZPR dynamic parameter analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Huaide, Chen

    1993-12-31

    Under the guiding ideology of synthesize to blaze new trails. Utilizing the combination of various technologies, such as modern nuclear detective technology, electronic technology, computer technology, reactor physics experimental technology, and system technology etc., a new type ZPR dynamic parameter analysis system is manufactured. It consists of neutron detector sets, which including BF{sub 3} proportional counter, {sup 3}He proportional counter, fission chamber etc., detector bias supply, amplifier and discriminator, counter and multiplexer, micro-computer-based multifunction multichannel analyzer and system management software etc. The system has been checked and accepted by the group of experts in 1991. After the discussion, it is thought, that the specifications of the system are satisfactory and surpassed the requirement in advance, the overall design is thoughtful, the manufacture technology attains the advanced level of China

  7. The Current State of Additive Manufacturing in Wind Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palmer, Sierra [Worcester Polytechnic Institute (WPI), , Worcester, MA (United States); Lee, Dominic [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States); Remo, Timothy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenne, Dale Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    Wind power is an inexhaustible form of energy that is being captured throughout the U.S. to power the engine of our economy. A robust, domestic wind industry promises to increase U.S. industry growth and competitiveness, strengthen U.S. energy security independence, and promote domestic manufacturing nationwide. As of 2016, ~82GW of wind capacity had been installed, and wind power now provides more than 5.5% of the nation’s electricity and supports more than 100,000 domestic jobs, including 500 manufacturing facilities in 43 States. To reach the U.S. Department of Energy’s (DOE’s) 2015 Wind Vision study scenario of wind power serving 35% of the nation's end-use demand by 2050, significant advances are necessary in all areas of wind technologies and market. An area that can greatly impact the cost and rate of innovation in wind technologies is the use of advanced manufacturing, with one of the most promising areas being additive manufacturing (AM). Considering the tremendous promise offered by advanced manufacturing, it is the purpose of this report to identify the use of AM in the production and operation of wind energy systems. The report has been produced as a collaborative effort for the DOE Wind Energy Technology Office (WETO), between Oak Ridge National Laboratory (ORNL) and the National Renewable Energy Laboratory (NREL).

  8. INDICATORS FOR SUSTAINABILITY IN INDUSTRIAL SYSTEMS CASE STUDY: PAPER MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Maria Emiliana Fortună

    2011-12-01

    Full Text Available The paper describes a framework for promoting sustainability by using indicators for sustainable production. The concept of sustainable production is described as it is viewed by various organisms actions involved in the analysis of the sustainable industrial systems.The measure of sustainability is approached considering indicators of sustainable production, addressing both their dimensions and qualitative and quantitative features.The proposed framework refines the sustainability dimension for a case study which envisages sustainability in paper manufacturing. The analysis takes into account the life cycle analysis for the considered process since the environmental impact is seen as an essential sustainability indicator. Paper recycling and reuse is associated environmental and social costs, as a preferred alternative in waste minimization hierarchy in the manufacturing of non-trees eco-friendly paper.Proactive initiatives to improve the environmental performances of production process are considered as powerful tools for improving the paper manufacturing environmental footprint.

  9. Westinghouse fuel manufacturing systems: a step change in performance improvements

    International Nuclear Information System (INIS)

    Mutyala, Meena

    2009-01-01

    Today's competitive electrical generation industry demands that nuclear power plant operators minimize total operating costs, including fuel cycle cost while maintaining flawless fuel performance. The mission of Westinghouse Nuclear Fuel is to be the industry's most responsive supplier of flawless, value added fuel products and services, as judged by our customers. As nuclear is fast becoming the choice of many countries, existing manufacturing plants and facilities are once again running at full capacity. In this context Westinghouse Nuclear Fuel is committed to deliver a step change in performance improvement worldwide through its manufacturing operations by the introduction of a set of fundamentals collectively named the 'Westinghouse Fuel Manufacturing System' (WFMS), whose key principles are discussed in this paper. (author)

  10. Development of a virtual manufacturing assembly simulation system

    Directory of Open Access Journals (Sweden)

    Abdulrahman M Al-Ahmari

    2016-03-01

    Full Text Available Assembly operations are a key component of modern manufacturing systems. Designing, planning, and conducting assembly operations represent an important part of the cost of a product. Virtual reality provides an efficient and cost-effective solution to manufacturing design, planning, and prototyping. Still there are certain issues (such as data translation, integration of various hardware and software systems, and real-time collision detection faced while applying this advanced technology to the assembly domain. For example, existing works focus on using virtual reality systems and environments mainly to design new products and to plan for assembly. Little focus has been given to develop virtual reality environments that contribute to train operators on assembly operations and to bridge the gap between design and implementation/execution of assembly. Therefore, the research work presented in this article focuses on developing a fully functional virtual manufacturing assembly simulation system that solves the issues related to virtual reality environments. The proposed system uses a virtual environment to create an interactive workbench that can be used for evaluating assembly decisions and training assembly operations. It is a comprehensive system that provides visual, auditory, tactile, as well as force feedback. The system works successfully even with large components.

  11. Advances in battery manufacturing, service, and management systems

    CERN Document Server

    Zhou, Shiyu; Han, Yehui

    2016-01-01

    This book brings together experts in the field to highlight the cutting edge research advances in BM2S2 and to promote an innovative integrated research framework responding to the challenges. There are three major parts included in this book: manufacturing, service, and management. The first part focuses on battery manufacturing systems, including modeling, analysis, design and control, as well as economic and risk analyses. The second part focuses on information technology’s impact on service systems, such as data-driven reliability modeling, failure prognosis, and service decision making methodologies for battery services. The third part addresses battery management systems (BMS) for control and optimization of battery cells, opera ions, and hybrid storage systems to ensure overall performance and safety, as well as EV management.

  12. Robotic system and method for manufacturing of objects

    DEFF Research Database (Denmark)

    2017-01-01

    The present disclosure relates to a method and a system for manufacturing a mould (17) for creation of complex objects, such as concrete objects, by controlling and moving two end effectors (1) of a robotic system, the two end effectors (1) having a flexible cutting element (3) attached to and ex......The present disclosure relates to a method and a system for manufacturing a mould (17) for creation of complex objects, such as concrete objects, by controlling and moving two end effectors (1) of a robotic system, the two end effectors (1) having a flexible cutting element (3) attached...... to and extending between the two end effectors (1), the method comprising the steps of: defining at least one surface (8) representing the inner surface of the mould (17); dividing the surface (8) into a number of segments represented by planar curves (9, 11, 12) on the surface (8); for each planar curve...

  13. Multilayer electronic component systems and methods of manufacture

    Science.gov (United States)

    Thompson, Dane (Inventor); Wang, Guoan (Inventor); Kingsley, Nickolas D. (Inventor); Papapolymerou, Ioannis (Inventor); Tentzeris, Emmanouil M. (Inventor); Bairavasubramanian, Ramanan (Inventor); DeJean, Gerald (Inventor); Li, RongLin (Inventor)

    2010-01-01

    Multilayer electronic component systems and methods of manufacture are provided. In this regard, an exemplary system comprises a first layer of liquid crystal polymer (LCP), first electronic components supported by the first layer, and a second layer of LCP. The first layer is attached to the second layer by thermal bonds. Additionally, at least a portion of the first electronic components are located between the first layer and the second layer.

  14. Survey on the virtual commissioning of manufacturing systems

    Directory of Open Access Journals (Sweden)

    Chi G. Lee

    2014-07-01

    Full Text Available This paper reviews and identifies issues in the application of virtual commissioning technology for automated manufacturing systems. While the real commissioning of a manufacturing system involves a real plant system and a real controller, the virtual commissioning deals with a virtual plant model and a real controller. The expected benefits of virtual commissioning are the reduction of debugging and correction efforts during the subsequent real commissioning stage. However, it requires a virtual plant model and hence still requires significant amount time and efforts. Two main issues are identified, the physical model construction of a virtual device, and the logical model construction of a virtual device. This paper reviews the current literature related to the two issues and proposes future research directions to achieve the full utilization of virtual commissioning technology.

  15. NATO Advanced Research Institute on the Efficiency of Manufacturing Systems

    CERN Document Server

    Berg, C; French, D

    1983-01-01

    The Advanced Research Institute (A.R. 1.) on "the efficiency of Manufacturing Systems" was held under the auspices of the NATO Special Programm~ Panel on Systems Science as a part of the NATO Science Committee's continuous effort to promote the advancement of science through international co-operation. Advanced Research Institutes are organised for the purpose of bringing together experts in a particular field of interest to identify and make known the present state of knowledge in that area and, through informed debate, to make recommendations for directions for future research that would benefit the community at large. To this end two kinds of contribution were obtained by invitation. There were those papers which were about the current state of work in the area of manufacturing systems and its organisation; in addition three theme papers were presented to provide a stimulus to the discussion in terms of ways of thinking, both about the area and about the kind of research needed.

  16. EVALUATION OF VALUE STREAM MAPPING IN MANUFACTURING SYSTEMS REDESIGNING

    OpenAIRE

    Serrano , Ibon; Ochoa Laburu , Carlos; De Castro , Rodolfo

    2008-01-01

    Abstract The Value Stream Mapping (VSM) technique, developed within the lean production paradigm, was presented as an innovative graphic technique to help practitioners redesign production systems. This paper presents the results of a project whose main purpose is to evaluate the real applicability of VSM to redesign disconnected flow lines based on manufacturing environments with a diversity of logistical problems. The research was developed using multiple case study methodology i...

  17. "Cut-and-Paste" Manufacture of Multiparametric Epidermal Sensor Systems.

    Science.gov (United States)

    Yang, Shixuan; Chen, Ying-Chen; Nicolini, Luke; Pasupathy, Praveenkumar; Sacks, Jacob; Su, Becky; Yang, Russell; Sanchez, Daniel; Chang, Yao-Feng; Wang, Pulin; Schnyer, David; Neikirk, Dean; Lu, Nanshu

    2015-11-04

    Multifunctional epidermal sensor systems (ESS) are manufactured with a highly cost and time effective, benchtop, and large-area "cut-and-paste" method. The ESS made out of thin and stretchable metal and conductive polymer ribbons can be noninvasively laminated onto the skin surface to sense electrophysiological signals, skin temperature, skin hydration, and respiratory rate. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    International Nuclear Information System (INIS)

    Sani, Mohd Shafie; Aziz, Faieza Abdul

    2013-01-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  19. VALIDATION OF THE SERVICEABILITY OF THE MANUFACTURING SYSTEM USING SIMULATION

    Directory of Open Access Journals (Sweden)

    LAZÁR, Ivan

    2012-12-01

    Full Text Available This article discusses the creation and use of known algorithms in production that uses a flow-shop system to monitor and verify its operability. It also describes the input data, which must be further opportunities for decision entered into the system. In the next section are described in detail the different parts of this procedure. Than it describes the sequential problems that are not yet at a practical level, few addressed, but thus methods shorten the processing time. The conclusion focuses on the validation of the serviceability of the manufacturing system using knowledge mentioned and their embedding and verification by simulation.

  20. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Science.gov (United States)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  1. Academic entrepreneurship in a medical university: A system dynamics approach

    Directory of Open Access Journals (Sweden)

    Tofighi Sharam

    2017-01-01

    Full Text Available Academic entrepreneurship is a dynamic field which is growing after the second academic revolution that added entrepreneurial mission as the Third Mission of universities. In this sense, dynamics of this phenomenon is a suitable field of study and provides fruitful insights for both theory and practice. Thus, in this research, system dynamics approach is used to scrutinize academic entrepreneurship. The main question of this research is 'how academic entrepreneurship might evolve in a medical university of a developing country?' Therefore, Cross Impact Analysis method is used to examine the system behavior. In this study, the main attributes are adapted from a recent study by Salamzadeh et al. (2013a. Then, some policy variables are proposed and their effects on the model were shown. Findings show that although entrepreneurial ecosystem is growing in the country, still there are problems to be taken into account in order to improve the entrepreneurship in university.

  2. A system approach for reducing the environmental impact of manufacturing and sustainability improvement of nano-scale manufacturing

    Science.gov (United States)

    Yuan, Yingchun

    This dissertation develops an effective and economical system approach to reduce the environmental impact of manufacturing. The system approach is developed by using a process-based holistic method for upstream analysis and source reduction of the environmental impact of manufacturing. The system approach developed consists of three components of a manufacturing system: technology, energy and material, and is useful for sustainable manufacturing as it establishes a clear link between manufacturing system components and its overall sustainability performance, and provides a framework for environmental impact reductions. In this dissertation, the system approach developed is applied for environmental impact reduction of a semiconductor nano-scale manufacturing system, with three case scenarios analyzed in depth on manufacturing process improvement, clean energy supply, and toxic chemical material selection. The analysis on manufacturing process improvement is conducted on Atomic Layer Deposition of Al2O3 dielectric gate on semiconductor microelectronics devices. Sustainability performance and scale-up impact of the ALD technology in terms of environmental emissions, energy consumption, nano-waste generation and manufacturing productivity are systematically investigated and the ways to improve the sustainability of the ALD technology are successfully developed. The clean energy supply is studied using solar photovoltaic, wind, and fuel cells systems for electricity generation. Environmental savings from each clean energy supply over grid power are quantitatively analyzed, and costs for greenhouse gas reductions on each clean energy supply are comparatively studied. For toxic chemical material selection, an innovative schematic method is developed as a visual decision tool for characterizing and benchmarking the human health impact of toxic chemicals, with a case study conducted on six chemicals commonly used as solvents in semiconductor manufacturing. Reliability of

  3. Maintenance scheduling of a manufacturing system subject to deterioration

    International Nuclear Information System (INIS)

    Ahmadi, Reza; Newby, Martin

    2011-01-01

    This paper presents an integrated model for the joint determination of both optimal inspection strategy and optimal repair policy for a manufacturing system whose resulting output is subject to system state. An appropriate maintenance strategy is essential to optimize revenue from a manufacturing system which is in continuous operation and subject to deterioration. The optimum policy balances the amount of maintenance required to increase availability against the loss of revenue arising from the down time: insufficient maintenance leads to an increase in the number of defective items, low profit and low maintenance cost; excessive maintenance results in a reduction in the proportion of defective items, high profit and high maintenance cost. In this paper, an intensity control model adapted to partial information provides an optimal inspection intensity and repair degree of the system as an optimal control process to yield maximum revenue. The solution is obtained through formulating an equivalent deterministic Hamilton-Jacobi equation. A numerical example is provided to illustrate the behavior of the optimal control process. The optimal control process determines a solution to both optimum inspection frequency and optimal replacement policy which results in an optimal production run length of the system. - Highlights: → We develop an optimum asset management strategy based on the revenue generated by the asset. → The optimum strategy controls the intensity, rate of occurrence, of interruptions to service. → The decisions are based on partial observation of the system and do not need perfect information. There is no need for continuous monitoring of the system.

  4. Flexible manufacturing system handbook. Volume 1: Executive summary

    Science.gov (United States)

    1983-02-01

    Flexible Manufacturing Systems (FMSs) represent a relatively new strategy to increase productivity. The technology is especially attractive for manufacturers who produce in the middle ranges of production volumes, neither mass production nor one of a kind. Today's unpredictable market environment demands low-cost solutions that provide quick product start-up, adaptability and responsiveness to changes in demand, and the capacity to easily resurrect out-of-production designs. In many instances, FMSs provide a direct hardware/software solution to this threefold management challenge. The adoption of FMS technology requires that one address many questions beforehand. This handbook provides a methodical approach to answering these questions. But it is not a cookbook; it cannot be. Each application of FMS technology is unique, therefore, the guidelines presented are fairly general.

  5. "Cut-and-paste" manufacture of multiparametric epidermal electronic systems

    Science.gov (United States)

    Lu, Nanshu; Yang, Shixuan; Wang, Pulin

    2016-05-01

    Epidermal electronics is a class of noninvasive and unobstructive skin-mounted, tattoo-like sensors and electronics capable of vital sign monitoring and establishing human-machine interface. The high cost of manpower, materials, vacuum equipment, and photolithographic facilities associated with its manufacture greatly hinders the widespread use of disposable epidermal electronics. Here we report a cost and time effective, completely dry, benchtop "cut-and-paste" method for the freeform and portable manufacture of multiparametric epidermal sensor systems (ESS) within minutes. This versatile method works for all types of thin metal and polymeric sheets and is compatible with any tattoo adhesives or medical tapes. The resulting ESS are multimaterial and multifunctional and have been demonstrated to noninvasively but accurately measure electrophysiological signals, skin temperature, skin hydration, as well as respiratory rate. In addition, planar stretchable coils exploiting double-stranded serpentine design have been successfully applied as wireless, passive epidermal strain sensors.

  6. System and method for high power diode based additive manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    El-Dasher, Bassem S.; Bayramian, Andrew; Demuth, James A.; Farmer, Joseph C.; Torres, Sharon G.

    2018-01-02

    A system is disclosed for performing an Additive Manufacturing (AM) fabrication process on a powdered material forming a substrate. The system may make use of a diode array for generating an optical signal sufficient to melt a powdered material of the substrate. A mask may be used for preventing a first predetermined portion of the optical signal from reaching the substrate, while allowing a second predetermined portion to reach the substrate. At least one processor may be used for controlling an output of the diode array.

  7. System and method for high power diode based additive manufacturing

    Science.gov (United States)

    El-Dasher, Bassem S.; Bayramian, Andrew; Demuth, James A.; Farmer, Joseph C.; Torres, Sharon G.

    2016-04-12

    A system is disclosed for performing an Additive Manufacturing (AM) fabrication process on a powdered material forming a substrate. The system may make use of a diode array for generating an optical signal sufficient to melt a powdered material of the substrate. A mask may be used for preventing a first predetermined portion of the optical signal from reaching the substrate, while allowing a second predetermined portion to reach the substrate. At least one processor may be used for controlling an output of the diode array.

  8. On-line monitoring system for I-131 manufacturing labs

    International Nuclear Information System (INIS)

    Osovizky, A.; Malamud, Y.; Paran, Y.; Tal, N.; Turgeman, S.; Weinstein, M.

    1997-01-01

    An on-line monitoring and safety system has been installed in a lab for manufacturing 1-131 capsules for nuclear medicine use. Production of up to 100mCi batches is performed in shielded glove boxes. The safety system is based on a unique, 'Medi SMARTS' system (Medical Survey Mapping Automatic Radiation Tracing System), that collects continuously the radiation measurements for processing, display, and storage for future retrieval. Radiation is measured by GM tubes, data is transferred to a data processing unit, and then via a RS-485 communication line to a computer. In addition to the operational advantages and radiation levels storage, the system is being evaluated for the purpose of identifying risky stages in the process. (authors)

  9. Application of artificial intelligence (AI) methods for designing and analysis of reconfigurable cellular manufacturing system (RCMS)

    CSIR Research Space (South Africa)

    Xing, B

    2009-12-01

    Full Text Available This work focuses on the design and control of a novel hybrid manufacturing system: Reconfigurable Cellular Manufacturing System (RCMS) by using Artificial Intelligence (AI) approach. It is hybrid as it combines the advantages of Cellular...

  10. A system approach to controlling semiconductor manufacturing operations

    OpenAIRE

    Σταυράκης, Γιώργος Δ.

    1987-01-01

    Semicoductor manufacturers, faced with stiffening competition in both product cost and quality, require improved utilization of their development and manufacturing resources. Manufacturing philosophy must be changed, from focusing on short term results, to support continuous improvements in both output and quality. Such improvements demand better information management to monitor and control the manufacturing process. From these considerations, a process control methodology was develope...

  11. quality assurance systems in nuclear fuel procurement and manufacturing

    International Nuclear Information System (INIS)

    Can, S.

    1997-01-01

    Quality is the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs. Quality control is activities and techniques used to fulfill the requirements of quality. Quality assurance is a system and its main components are requirements. QA program, organization and responsibilities, design and verification, material and its control, manufacturing and process control, inspections, audits and documents: manuals, specifications, instructions. Quality assurance systems are largely based on ISO 9000 series of the International Standards Organization. ISO 9000 series has been adopted and published by Turkish Standards Institute as TS-ISO 9000. International Atomic Energy Agency also published a guide (50-SG-QA11) ''Quality Assurance in the Procurement, Design and Manufacture of Nuclear Fuel Assemblies'' in the safety guide series. In this study the role of quality control in quality assurance systems, inspection and test plans and acceptance and nonconformance quality levels will be explained in relation to nuclear fuel production. Examples of applications in quality assurance systems based on ISO 9000 will be given

  12. Intelligent Counseling System: A 24 x 7 Academic Advisor

    Science.gov (United States)

    Leung, Chun Ming; Tsang, Eva Y. M.; Lam, S. S.; Pang, Dominic C. W.

    2010-01-01

    Universities are increasingly looking into self-service systems with intelligent digital agents to supplement or replace labor-intensive services, such as academic counseling. The Open University of Hong Kong has developed an intelligent online system that instantly responds to enquiries about career development, learning modes, program/course…

  13. Sikorsky interactive graphics surface design/manufacturing system

    Science.gov (United States)

    Robbins, R.

    1975-01-01

    An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

  14. Foundations & principles of distributed manufacturing elements of manufacturing networks, cyber-physical production systems and smart automation

    CERN Document Server

    Kühnle, Hermann

    2015-01-01

    The book presents a coherent description of distributed manufacturing, providing a solid base for further research on the subject as well as smart implementations in companies. It provides a guide for those researching and working in a range of fields, such as smart manufacturing, cloud computing, RFID tracking, distributed automation, cyber physical production and global design anywhere, manufacture anywhere solutions. Foundations & Principles of Distributed Manufacturing anticipates future advances in the fields of embedded systems, the Internet of Things and cyber physical systems, outlining how adopting these innovations could rapidly bring about improvements in key performance indicators, which could in turn generate competition pressure by rendering successful business models obsolete. In laying the groundwork for powerful theoretical models, high standards for the homogeneity and soundness of the suggested setups are applied. The book especially elaborates on the upcoming competition in online manu...

  15. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    Science.gov (United States)

    2016-02-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

  16. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference and APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    International Nuclear Information System (INIS)

    2016-01-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme 'Materials, Manufacturing and Systems for Tomorrow'. For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC and APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on &apos

  17. OS Independent Mobile Solutions for Manufacturing Execution Systems

    Directory of Open Access Journals (Sweden)

    Heiko Meyer

    2013-12-01

    Full Text Available From the suppliers' perspective it is best to provide the user of a plant with a mobile solution in the form of perfectly matching Apps for the rolled-out manufacturing execution system. Due to the extremely short innovation cycle in the mobile phone development and not least because of the first iPhone generation launch in 2007 the mobile phone market completely changed over the past four years. Today, a large percentage of the sold devices can be classified as smart phones. The paper describes an easy and reliable way to develop OS independent mobile solutions for all common smartphones based on standard technologies.

  18. Image change detection systems, methods, and articles of manufacture

    Science.gov (United States)

    Jones, James L.; Lassahn, Gordon D.; Lancaster, Gregory D.

    2010-01-05

    Aspects of the invention relate to image change detection systems, methods, and articles of manufacture. According to one aspect, a method of identifying differences between a plurality of images is described. The method includes loading a source image and a target image into memory of a computer, constructing source and target edge images from the source and target images to enable processing of multiband images, displaying the source and target images on a display device of the computer, aligning the source and target edge images, switching displaying of the source image and the target image on the display device, to enable identification of differences between the source image and the target image.

  19. System for manufacturing ash products and energy from refuse waste

    Energy Technology Data Exchange (ETDEWEB)

    Sutin, G.L.; Mahoney, P.F.

    1996-01-04

    The present invention provides a system of manufacturing energy and ash products from solid waste. The system includes apparatus for receiving solid waste for processing, apparatus for shredding the received solid waste, apparatus for removing ferrous material from the shredded solid waste to create processed refuse fuel (PRF) and apparatus for efficiently combusting the PRF. A conveyor transfers the PRF to the combusting apparatus such that the density of the PRF is always controlled for continuous non-problematic flow. Apparatus for recovering residual combustion particulate from the combustion residual gases and for recovering solid ash residue provides the system with the ability to generate steam and electrical energy, and to recover for reuse and recycling valuable materials from the solid ash residue. (author) figs.

  20. Incident Management in Academic Information System using ITIL Framework

    Science.gov (United States)

    Palilingan, V. R.; Batmetan, J. R.

    2018-02-01

    Incident management is very important in order to ensure the continuity of a system. Information systems require incident management to ensure information systems can provide maximum service according to the service provided. Many of the problems that arise in academic information systems come from incidents that are not properly handled. The objective of this study aims to find the appropriate way of incident management. The incident can be managed so it will not be a big problem. This research uses the ITIL framework to solve incident problems. The technique used in this study is a technique adopted and developed from the service operations section of the ITIL framework. The results of this research found that 84.5% of incidents appearing in academic information systems can be handled quickly and appropriately. 15.5% incidents can be escalated so as to not cause any new problems. The model of incident management applied to make academic information system can run quickly in providing academic service in a good and efficient. The incident management model implemented in this research is able to manage resources appropriately so as to quickly and easily manage incidents.

  1. ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    N. E. Filyukov

    2014-09-01

    Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

  2. Dynamic cellular manufacturing system considering machine failure and workload balance

    Science.gov (United States)

    Rabbani, Masoud; Farrokhi-Asl, Hamed; Ravanbakhsh, Mohammad

    2018-02-01

    Machines are a key element in the production system and their failure causes irreparable effects in terms of cost and time. In this paper, a new multi-objective mathematical model for dynamic cellular manufacturing system (DCMS) is provided with consideration of machine reliability and alternative process routes. In this dynamic model, we attempt to resolve the problem of integrated family (part/machine cell) formation as well as the operators' assignment to the cells. The first objective minimizes the costs associated with the DCMS. The second objective optimizes the labor utilization and, finally, a minimum value of the variance of workload between different cells is obtained by the third objective function. Due to the NP-hard nature of the cellular manufacturing problem, the problem is initially validated by the GAMS software in small-sized problems, and then the model is solved by two well-known meta-heuristic methods including non-dominated sorting genetic algorithm and multi-objective particle swarm optimization in large-scaled problems. Finally, the results of the two algorithms are compared with respect to five different comparison metrics.

  3. Developing a cyber-physical system for hybrid manufacturing in an internet-of-things context

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Vanderfeesten, I.T.P.; Boultadakis, G.; Gonzalez Garcia, Christian; Garcia-Diaz, Vicente; Pelayo Garcia-Bustelo, B. Cristina; Cueva Lovelle, Juan Manuel

    2018-01-01

    This chapter describes design and development of the HORSE system for process-oriented hybrid manufacturing that seamlessly integrates human and robotics actors in vertical manufacturing cells that are horizontally coupled in end-to-end manufacturing processes. The HORSE system supports advanced

  4. 78 FR 8407 - Authorization To Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia

    Science.gov (United States)

    2013-02-06

    ... POSTAL SERVICE 39 CFR Part 501 Authorization To Manufacture and Distribute Postage Evidencing... is amending the rules concerning the manufacture and distribution of postage evidencing systems to... MANUFACTURE AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS 0 1. The authority citation for 39 CFR part 501...

  5. A systems approach to empowerment in manufacturing enterprises

    OpenAIRE

    McEwan, Anne Marie

    1999-01-01

    Business challenges posed by turbulcnt local and global operating conditions are driving the adoption of new manufacturing strategies. Employee empowerment is vicwcd as a key enabler of these strategies within manufacturing enterprises. Analysis of the empowerment literature revealed that empowerment is poorly conccptualiscd. Little empirical evidcncc exists on the factors that influence the rcalisation of empowerment in manufacturing production. Paralld analysis in other domai...

  6. DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2014-09-01

    Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

  7. System and method for manufacture of airfoil components

    Science.gov (United States)

    Moors, Thomas Michael

    2016-11-29

    Embodiments of the present disclosure relate generally to systems and methods for manufacturing an airfoil component. The system can include: a geometrical mold; an elongated flexible sleeve having a closed-off interior and positioned within the geometrical mold, wherein the elongated flexible sleeve is further positioned to have a desired geometry; an infusing channel in fluid communication with the closed-off interior of the elongated flexible sleeve and configured to communicate a resinous material thereto; a vacuum channel in fluid communication with the closed-off interior of the elongated flexible sleeve and configured to vacuum seal the closed-off interior of the elongated flexible sleeve; and a glass fiber layer positioned within the closed-off interior of the elongated flexible sleeve.

  8. Online System Adoption and K-12 Academic Outcomes

    Science.gov (United States)

    Kimmons, R.

    2015-01-01

    This study seeks to understand the relationship between K-12 online system adoption (e.g., Blackboard, Edmodo, WordPress) and school-level academic achievement ratings. Utilizing a novel approach to data collection via website data extraction and indexing of all school websites in a target state in the United States (n?=?732) and merging these…

  9. Configuration Method Design for Reconfigurable Manufacturing System with the aid of Plant Simulation

    DEFF Research Database (Denmark)

    Li, Yang; Zhang, Shuai; Bilberg, Arne

    2014-01-01

    A new Reconfigurable Manufacturing System structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to balance the performance of productivity and flexibility. This article shows an exploratory research on the (re)configuration procedure of the new RMS structure....... Following the procedure which is designed in this paper, the (re)configuration of RMS can be managed as part of the daily operation with the help of computer simulation. Keywords: Plant Simulation, Tecnomatix, Reconfigurable Manufacturing System, modular manufacturing....

  10. System reliability evaluation of a touch panel manufacturing system with defect rate and reworking

    International Nuclear Information System (INIS)

    Lin, Yi-Kuei; Huang, Cheng-Fu; Chang, Ping-Chen

    2013-01-01

    In recent years, portable consumer electronic products, such as cell phone, GPS, digital camera, tablet PC, and notebook are using touch panel as interface. With the demand of touch panel increases, performance assessment is essential for touch panel production. This paper develops a method to evaluate system reliability of a touch panel manufacturing system (TPMS) with defect rate of each workstation and takes reworking actions into account. The system reliability which evaluates the possibility of demand satisfaction can provide to managers with an understanding of the system capability and can indicate possible improvements. First, we construct a capacitated manufacturing network (CMN) for a TPMS. Second, a decomposition technique is developed to determine the input flow of each workstation based on the CMN. Finally, we generate the minimal capacity vectors that should be provided to satisfy the demand. The system reliability is subsequently evaluated in terms of the minimal capacity vectors. A further decision making issue is discussed to decide a reliable production strategy. -- Graphical abstract: The proposed procedure to evaluate system reliability of the touch panel manufacturing system (TPMS). Highlights: • The system reliability of a touch panel manufacturing system (TPMS) is evaluated. • The reworking actions are taken into account in the TPMS. • A capacitated manufacturing network is constructed for the TPMS. • A procedure is proposed to evaluate system reliability of TPMS

  11. YUCSA: A CLIPS expert database system to monitor academic performance

    Science.gov (United States)

    Toptsis, Anestis A.; Ho, Frankie; Leindekar, Milton; Foon, Debra Low; Carbonaro, Mike

    1991-01-01

    The York University CLIPS Student Administrator (YUCSA), an expert database system implemented in C Language Integrated Processing System (CLIPS), for monitoring the academic performance of undergraduate students at York University, is discussed. The expert system component in the system has already been implemented for two major departments, and it is under testing and enhancement for more departments. Also, more elaborate user interfaces are under development. We describe the design and implementation of the system, problems encountered, and immediate future plans. The system has excellent maintainability and it is very efficient, taking less than one minute to complete an assessment of one student.

  12. Writing by Academics: A Transactional and Systems Approach to Academic Writing Behaviours

    Science.gov (United States)

    Kempenaar, Larissa Elisabeth; Murray, Rowena

    2016-01-01

    The literature on academic writing in higher education contains a wealth of research and theory on students' writing, but much less on academics' writing. In performative higher education cultures, discussions of academics' writing mainly concern outputs, rather than the process of producing them. This key component of academic work remains…

  13. Analysis on flexible manufacturing system layout using arena simulation software

    Science.gov (United States)

    Fadzly, M. K.; Saad, Mohd Sazli; Shayfull, Z.

    2017-09-01

    Flexible manufacturing system (FMS) was defined as highly automated group technology machine cell, consisting of a group of processing stations interconnected by an automated material handling and storage system, and controlled by an integrated computer system. FMS can produce parts or products are in the mid-volume, mid-variety production range. The layout system in FMS is an important criterion to design the FMS system to produce a part or product. This facility layout of an FMS involves the positioning of cells within given boundaries, so as to minimize the total projected travel time between cells. Defining the layout includes specifying the spatial coordinates of each cell, its orientation in either a horizontal or vertical position, and the location of its load or unloads point. There are many types of FMS layout such as In-line, loop ladder and robot centered cell layout. The research is concentrating on the design and optimization FMS layout. The final conclusion can be summarized that the objective to design and optimisation of FMS layout for this study is successful because the FMS In-line layout is the best layout based on effective time and cost using ARENA simulation software.

  14. Modeling and Analysis of Reentrant Manufacturing Systems: Micro- and Macroperspectives

    Directory of Open Access Journals (Sweden)

    Fenglan He

    2011-01-01

    Full Text Available In order to obtain the better analysis of the multiple reentrant manufacturing systems (MRMSs, their modeling and analysis from both micro- and macroperspectives are considered. First, this paper presents the discrete event simulation models for MRMS and the corresponding algorithms are developed. In order to describe MRMS more accurately, then a modified continuum model is proposed. This continuum model takes into account the re-entrant degree of products, and its effectiveness is verified through numerical experiments. Finally, based on the discrete event simulation and the modified continuum models, a numerical example is used to analyze the MRMS. The changes in the WIP levels and outflux are also analyzed in details for multiple re-entrant supply chain networks. Meanwhile, some interesting observations are discussed.

  15. Cellular Manufacturing System with Dynamic Lot Size Material Handling

    Science.gov (United States)

    Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

    2016-02-01

    Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

  16. The integration between Business Model Canvas and Manufacturing System Design

    Science.gov (United States)

    Prasetyawan, Y.; Maulida, N.; Lutvitasari, M. R.

    2018-04-01

    Business Model Canvas (BMC) is an increasingly popular business design tool especially for a start-up business and new business player. In general, BMC seeks a balance between effective working patterns with suppliers, good relation with customers and ability to understand and manage internal resources. This balance will expedite the implementation of Manufacturing System Design (MSD). The existing use of BMC and MSD is frequently applied separately at various business levels. BMC business plan is primarily to have engagement with customers and explore potential revenue to increase profits, while MSD primarily aims to meet production targets with available resources. The purpose of this research is to provide a roadmap to align BMC and MSD. A series of simple mathematical (modified) and integration models are created to connect BMC and MSD. Several results in various industries (new, developed and mature) are presented and used as examples of implementation.

  17. Thinking strategically: academic-practice relationships: one health system's experience.

    Science.gov (United States)

    Wurmser, Teri; Bliss-Holtz, Jane

    2011-01-01

    Strategic planning and joint leverage of the strengths inherent in the academic and practice arenas of nursing are imperative to confront the challenges facing the profession of nursing and its place within the healthcare team of the future. This article presents a description and discussion of the implementation of several academic-practice partnership initiatives by Meridian Health, a health system located in central New Jersey. Included in the strategies discussed are creation of a support program for nonprofessional employees to become registered nurses; active partnership in the development of an accelerated BSN program; construction of support systems and academic partnerships for staff participation in RN-to-BSN programs; construction of on-site clinical simulation laboratories to foster interprofessional learning; and the implementation of a new BSN program, the first and only generic BSN program in two counties of the state. Outcomes of these academic-practice partnerships also are presented, including number of participants; graduation and NCLEX-RN pass rates; MH nurse vacancy rates; and nurse retention rates after first employment. Copyright © 2011 Elsevier Inc. All rights reserved.

  18. Development of a medical academic degree system in China.

    Science.gov (United States)

    Wu, Lijuan; Wang, Youxin; Peng, Xiaoxia; Song, Manshu; Guo, Xiuhua; Nelson, Hugh; Wang, Wei

    2014-01-01

    The Chinese government launched a comprehensive healthcare reform to tackle challenges to health equities. Medical education will become the key for successful healthcare reform. We describe the current status of the Chinese medical degree system and its evolution over the last 80 years. Progress has been uneven, historically punctuated most dramatically by the Cultural Revolution. There is a great regional disparity. Doctors with limited tertiary education may be licensed to practice, whereas medical graduates with advanced doctorates may have limited clinical skills. There are undefined relationships between competing tertiary training streams, the academic professional degree, and the clinical residency training programme (RTP). The perceived quality of training in both streams varies widely across China. As the degrees of master or doctor of academic medicine is seen as instrumental in career advancement, including employability in urban hospitals, attainment of this degree is sought after, yet is often unrelated to a role in health care, or is seen as superior to clinical experience. Meanwhile, the practical experience gained in some prestigious academic institutions is deprecated by the RTP and must be repeated before accreditation for clinical practice. This complexity is confusing both for students seeking the most appropriate training, and also for clinics, hospitals and universities seeking to recruit the most appropriate applicants. The future education reforms might include: 1) a domestic system of 'credits' that gives weight to quality clinical experience vs. academic publications in career advancement, enhanced harmonisation between the competing streams of the professional degree and the RTP, and promotion of mobility of staff between areas of excellence and areas of need; 2) International - a mutual professional and academic recognition between China and other countries by reference to the Bologna Accord, setting up a system of easily comparable and

  19. Data-driven system to predict academic grades and dropout

    Science.gov (United States)

    Rovira, Sergi; Puertas, Eloi

    2017-01-01

    Nowadays, the role of a tutor is more important than ever to prevent students dropout and improve their academic performance. This work proposes a data-driven system to extract relevant information hidden in the student academic data and, thus, help tutors to offer their pupils a more proactive personal guidance. In particular, our system, based on machine learning techniques, makes predictions of dropout intention and courses grades of students, as well as personalized course recommendations. Moreover, we present different visualizations which help in the interpretation of the results. In the experimental validation, we show that the system obtains promising results with data from the degree studies in Law, Computer Science and Mathematics of the Universitat de Barcelona. PMID:28196078

  20. 77 FR 41336 - Authorization to Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia

    Science.gov (United States)

    2012-07-13

    ... POSTAL SERVICE 39 CFR Part 501 Authorization to Manufacture and Distribute Postage Evidencing... Service proposes to amend the rules concerning the manufacture and distribution of postage evidencing... MANUFACTURE AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS 1. The authority citation for 39 CFR part 501 continues...

  1. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    OpenAIRE

    Gregorius Satia Budhi

    2003-01-01

    Flexible Manufacturing System (FMS) is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC) approach was used as the weight to search the operation route in the proper machine, so that the total production cost ...

  2. Total quality through computer integrated manufacturing in the pharmaceutical industry.

    Science.gov (United States)

    Ufret, C M

    1995-01-01

    The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

  3. Building Flexible Manufacturing Systems Based on Peer-Its

    Directory of Open Access Journals (Sweden)

    M. Hechinger

    2008-02-01

    Full Text Available Peer-to-peer computing principles have started to pervade into mechanical control systems, inducing a paradigm shift from centralized to autonomic control. We have developed a self-contained, miniaturized, universal and scalable peer-to-peer based hardware-software system, the peer-it platform, to serve as a stick-on computer solution to raise real-world artefacts like, for example, machines, tools, or appliances towards technology-rich, autonomous, self-induced, and context-aware peers, operating as spontaneously interacting ensembles. The peer-it platform integrates sensor, actuator, and wireless communication facilities on the hardware level, with an object-oriented, component-based coordination framework at the software level, thus providing a generic platform for sensing, computing, controlling, and communication on a large scale. The physical appearance of a peer-it supports pinning it to real-world artefacts, while at the same time integrating those artefacts into a mobile ad hoc network of peers. Peer-it networks thus represent ensembles of coordinated artefacts, exhibiting features of autonomy like self-management at the node level and self-organization at the network level. We demonstrate how the peer-it system implements the desired flexibility in automated manufacturing systems to react in the case of changes, whether intended or unexpectedly occuring. The peer-it system enables machine flexibility in that it adapts production facilities to produce new types of products, or change the order of operation executed on parts instantaneously. Secondly, it enables routing flexibility, that is, the ability to use multiple machines to spontaneously perform the same operation on one part alternatively (to implement autonomic fault tolerance or to absorb large-scale changes in volume, capacity, or capability (to implement autonomic scalability.

  4. Building Flexible Manufacturing Systems Based on Peer-Its

    Directory of Open Access Journals (Sweden)

    dos Santos Rocha M

    2008-01-01

    Full Text Available Abstract Peer-to-peer computing principles have started to pervade into mechanical control systems, inducing a paradigm shift from centralized to autonomic control. We have developed a self-contained, miniaturized, universal and scalable peer-to-peer based hardware-software system, the peer-it platform, to serve as a stick-on computer solution to raise real-world artefacts like, for example, machines, tools, or appliances towards technology-rich, autonomous, self-induced, and context-aware peers, operating as spontaneously interacting ensembles. The peer-it platform integrates sensor, actuator, and wireless communication facilities on the hardware level, with an object-oriented, component-based coordination framework at the software level, thus providing a generic platform for sensing, computing, controlling, and communication on a large scale. The physical appearance of a peer-it supports pinning it to real-world artefacts, while at the same time integrating those artefacts into a mobile ad hoc network of peers. Peer-it networks thus represent ensembles of coordinated artefacts, exhibiting features of autonomy like self-management at the node level and self-organization at the network level. We demonstrate how the peer-it system implements the desired flexibility in automated manufacturing systems to react in the case of changes, whether intended or unexpectedly occuring. The peer-it system enables machine flexibility in that it adapts production facilities to produce new types of products, or change the order of operation executed on parts instantaneously. Secondly, it enables routing flexibility, that is, the ability to use multiple machines to spontaneously perform the same operation on one part alternatively (to implement autonomic fault tolerance or to absorb large-scale changes in volume, capacity, or capability (to implement autonomic scalability.

  5. Particle dispersing system and method for testing semiconductor manufacturing equipment

    Science.gov (United States)

    Chandrachood, Madhavi; Ghanayem, Steve G.; Cantwell, Nancy; Rader, Daniel J.; Geller, Anthony S.

    1998-01-01

    The system and method prepare a gas stream comprising particles at a known concentration using a particle disperser for moving particles from a reservoir of particles into a stream of flowing carrier gas. The electrostatic charges on the particles entrained in the carrier gas are then neutralized or otherwise altered, and the resulting particle-laden gas stream is then diluted to provide an acceptable particle concentration. The diluted gas stream is then split into a calibration stream and the desired output stream. The particles in the calibration stream are detected to provide an indication of the actual size distribution and concentration of particles in the output stream that is supplied to a process chamber being analyzed. Particles flowing out of the process chamber within a vacuum pumping system are detected, and the output particle size distribution and concentration are compared with the particle size distribution and concentration of the calibration stream in order to determine the particle transport characteristics of a process chamber, or to determine the number of particles lodged in the process chamber as a function of manufacturing process parameters such as pressure, flowrate, temperature, process chamber geometry, particle size, particle charge, and gas composition.

  6. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2012-04-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decisionmaking, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that canlead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issuesassociated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes animproved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  7. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2011-10-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decision making, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that can lead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issues associated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes an improved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  8. New Concepts and Theories For Intelligent Control of Cellular Manufacturing Systems

    DEFF Research Database (Denmark)

    Langer, Gilad

    1996-01-01

    This paper will present some new theories such as biological manufacturing system, the fractal factory theory, holonic manufacturing systems, agile manufacturing, object orientation, multi-agent theory, artificial intelligence, and artificial life in the context of manufacturing systems....... The paper tries to encapsulate the main area of my Ph.D. thesis research which will evolve around the idea of integrating intelligent elements into the control systems of the manufacturing systems. Furthermore it intends to show how the curriculum and discussions of the IPS Ph.D. course will and have...... contributed to my research. The research will concentrate on integration of manufacturing units by use of intelligent control mechanisms, information technology and the material handling as the key integrators....

  9. 76 FR 67018 - Notice to Manufacturers of Airport In-Pavement Stationary Runway Weather Information Systems

    Science.gov (United States)

    2011-10-28

    ...-Pavement Stationary Runway Weather Information Systems AGENCY: Federal Aviation Administration (FAA), U.S. DOT. ACTION: Notice to Manufacturers of In-Pavement Stationary Runway Weather Information Systems... Operations. This notice requests information from manufacturers of systems meeting the technical requirements...

  10. Hybrid additive manufacturing of 3D electronic systems

    International Nuclear Information System (INIS)

    Li, J; Wasley, T; Nguyen, T T; Kay, R; Ta, V D; Shephard, J D; Stringer, J; Smith, P; Esenturk, E; Connaughton, C

    2016-01-01

    A novel hybrid additive manufacturing (AM) technology combining digital light projection (DLP) stereolithography (SL) with 3D micro-dispensing alongside conventional surface mount packaging is presented in this work. This technology overcomes the inherent limitations of individual AM processes and integrates seamlessly with conventional packaging processes to enable the deposition of multiple materials. This facilitates the creation of bespoke end-use products with complex 3D geometry and multi-layer embedded electronic systems. Through a combination of four-point probe measurement and non-contact focus variation microscopy, it was identified that there was no obvious adverse effect of DLP SL embedding process on the electrical conductivity of printed conductors. The resistivity maintained to be less than 4  ×  10 −4 Ω · cm before and after DLP SL embedding when cured at 100 °C for 1 h. The mechanical strength of SL specimens with thick polymerized layers was also identified through tensile testing. It was found that the polymerization thickness should be minimised (less than 2 mm) to maximise the bonding strength. As a demonstrator a polymer pyramid with embedded triple-layer 555 LED blinking circuitry was successfully fabricated to prove the technical viability. (paper)

  11. Development of the computer-aided process planning (CAPP system for polymer injection molds manufacturing

    Directory of Open Access Journals (Sweden)

    J. Tepić

    2011-10-01

    Full Text Available Beginning of production and selling of polymer products largely depends on mold manufacturing. The costs of mold manufacturing have significant share in the final price of a product. The best way to improve and rationalize polymer injection molds production process is by doing mold design automation and manufacturing process planning automation. This paper reviews development of a dedicated process planning system for manufacturing of the mold for injection molding, which integrates computer-aided design (CAD, computer-aided process planning (CAPP and computer-aided manufacturing (CAM technologies.

  12. Future Role of Application of New Technologies in Small-and Medium Scale Manufacturing Systems - Regarding Intelligent and Advanced Manufacturing Systems in Northern Peripheral Area

    OpenAIRE

    Somlò, Kinga; Sziebig, Gabor

    2017-01-01

    Accepted manuscript version. Link to publishers version: http://doi.org/10.1109/ISIE.2017.8001510 Nowadays the concept of Industry 4.0. and the relating intelligent manufacturing system are getting more and more current and well-known. In the past years the outstanding development of different areas such as information technology computer science, machining, robotics and so on, made possible a comprehensive transformation of the manufacturing systems. Present paper aims to give a gener...

  13. Sensor fusion control system for computer integrated manufacturing

    CSIR Research Space (South Africa)

    Kumile, CM

    2007-08-01

    Full Text Available -floor control using sensors previously missing in manufacturing research. The contribution is in the ease and the elegance that the concept provides finite state/ automata activities as well as the production engineering elements such as planning...

  14. Analyzing the Drivers of Advanced Sustainable Manufacturing System Using AHP Approach

    Directory of Open Access Journals (Sweden)

    K. Madan Shankar

    2016-08-01

    Full Text Available A number of current manufacturing sectors are striving hard to introduce innovative long-term strategies into their operations. As a result, many scholarly studies have found it fruitful to investigate advanced manufacturing strategies such as agile, computer-integrated, and cellular manufacturing. Through the example of downstream cases, manufacturing sectors have learned that financial benefits garnered through automated technologies cannot be counted on as a sole measure to ensure their success in today’s competitive and fluctuating marketplaces. The objective of this study is to integrate those advanced techniques with sustainable operations, to promote advanced sustainable manufacturing so those manufacturing sectors can thrive even in uncertain markets. To establish this connection, this study analyzes the drivers of advanced sustainable manufacturing through a proposed framework validated through a case study in India. Common drivers are collected from the literature, calibrated with opinions from experts, and analyzed through an analytical hierarchy process (AHP, which is a multi-criteria decision making (MCDM approach. This study reveals that quality is the primary driver that pressures manufacturing sectors to adopt advanced sustainable manufacturing. Manufacturers can easily note the top ranked driver and adopt it to soundly implement advanced sustainable manufacturing. In addition, some key future scopes are explored along with possible recommendations for effective implementation of advanced sustainable manufacturing systems.

  15. Advanced Manufacturing for Thermal and Environmental Control Systems: Achieving National Energy Goals

    Energy Technology Data Exchange (ETDEWEB)

    Bogucz, Edward A. [Syracuse Univ., NY (United States)

    2017-02-20

    This project was part of a regional initiative in the five counties of Central New York (CNY) that received funding from the U.S. Department of Energy (DOE) and four other federal agencies through the 2012 Advanced Manufacturing Jobs and Innovation Accelerator Challenge (AMJIAC). The CNY initiative was focused on cultivating the emergent regional cluster in “Advanced Manufacturing for Thermal and Environmental Control (AM-TEC).” As one component of the CNY AM-TEC initiative, the DOE-funded project supported five research & development seed projects that strategically targeted: 1) needs and opportunities of CNY AM-TEC companies, and 2) the goal of DOE’s Advanced Manufacturing Office (AMO) to reduce energy consumption by 50% across product life-cycles over 10 years. The project also sought to fulfill the AMO mission of developing and demonstrating new, energy-efficient processing and materials technologies at a scale adequate to prove their value to manufacturers and spur investment. The five seed projects demonstrated technologies and processes that can reduce energy intensity and improve production as well as use less energy throughout their lifecycles. The project was conducted over three years in two 18-month budget periods. During the first budget period, two projects proposed in the original AMJAIC application were successfully completed: Seed Project 1 focused on saving energy in heat transfer processes via development of nano structured surfaces to significantly increase heat flux; Seed Project 2 addressed saving energy in data centers via subzero cooling of the computing processors. Also during the first budget period, a process was developed and executed to select a second round of seed projects via a competitive request for proposals from regional companies and university collaborators. Applicants were encouraged to form industry-academic partnerships to leverage experience and resources of public and private sectors in the CNY region. Proposals were

  16. Taxonomies for Reasoning About Cyber-physical Attacks in IoT-based Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Yao Pan

    2017-03-01

    Full Text Available The Internet of Things (IoT has transformed many aspects of modern manufacturing, from design to production to quality control. In particular, IoT and digital manufacturing technologies have substantially accelerated product development- cycles and manufacturers can now create products of a complexity and precision not heretofore possible. New threats to supply chain security have arisen from connecting machines to the Internet and introducing complex IoT-based systems controlling manufacturing processes. By attacking these IoT-based manufacturing systems and tampering with digital files, attackers can manipulate physical characteristics of parts and change the dimensions, shapes, or mechanical properties of the parts, which can result in parts that fail in the field. These defects increase manufacturing costs and allow silent problems to occur only under certain loads that can threaten safety and/or lives. To understand potential dangers and protect manufacturing system safety, this paper presents two taxonomies: one for classifying cyber-physical attacks against manufacturing processes and another for quality control measures for counteracting these attacks. We systematically identify and classify possible cyber-physical attacks and connect the attacks with variations in manufacturing processes and quality control measures. Our taxonomies also provide a scheme for linking emerging IoT-based manufacturing system vulnerabilities to possible attacks and quality control measures.

  17. SOME IMPORTANT FACTORS AFFECTING EVOLUTION OF ACTIVITY BASED COSTING (ABC SYSTEM IN EGYPTIAN MANUFACTURING FIRMS

    Directory of Open Access Journals (Sweden)

    Karim MAMDOUH ABBAS

    2014-04-01

    Full Text Available The present investigation aims to determine the factors affecting evolution of Activity Based Costing (ABC system in Egyptian case. The study used the survey method to describe and analyze these factors in some Egyptian firms. The population of the study is Egyptian manufacturing firms. Accordingly, the number of received questionnaires was 392 (23 Egyptian manufacturing firms in the first half of 2013. Finally, the study stated some influencing factors for evolution this system (ABC in Egyptian manufacturing firms.

  18. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  19. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  20. A Holistic Approach to Manufacturing System Design in the Defense Aerospace Industry

    National Research Council Canada - National Science Library

    Vaughn, Amanda

    2002-01-01

    .... Also, manufacturing systems are complex systems that need to be carefully designed in a holistic manner and there are shortcomings with available tools and methods to assist in the design of these systems...

  1. Modifying the Toyota Production System for continuous performance improvement in an academic children's hospital.

    Science.gov (United States)

    Stapleton, F Bruder; Hendricks, James; Hagan, Patrick; DelBeccaro, Mark

    2009-08-01

    The Toyota Production System (TPS) has become a successful model for improving efficiency and eliminating errors in manufacturing processes. In an effort to provide patients and families with the highest quality clinical care, our academic children's hospital has modified the techniques of the TPS for a program in continuous performance improvement (CPI) and has expanded its application to educational and research programs. Over a period of years, physicians, nurses, residents, administrators, and hospital staff have become actively engaged in a culture of continuous performance improvement. This article provides background into the methods of CPI and describes examples of how we have applied these methods for improvement in clinical care, resident teaching, and research administration.

  2. The Hybrid Lean System to Improve Manufacturing Environment

    Directory of Open Access Journals (Sweden)

    Ahmad Ahmad Nur Aizat

    2017-01-01

    Full Text Available Lean manufacturing is a systematic approch could increase manufacturing competitiveness by identifying and elminating waste through lean tools. However, these tools are often categorized into different groups, continues to be difficult for companies to select the most appropriate lean tool to be adopted, especially in respect of the SMEs whose knowledge of lean tools and associated principles are limited. This study is to propose solution on how to implement appropriate lean tools in food manufacturing industry located at Rengit, Johor. Qualitative method is used as a methodology to see the changes after the implementation of lean tools. Interview session also a part of method to collect data from respondents. The finding from this paper shows that implementation of an appropriate lean tool will help to eliminate waste in industry sector, maintain and control the inventory, improve quality of the product and improve overall operational process.

  3. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  4. [ZHU Lian's New Acupuncture Academic System and acupuncture science initialization].

    Science.gov (United States)

    Zhang, Shujian; Zhang, Lijian

    2015-11-01

    Acupuncture scientization was a consensus of most of acupuncture scholars who had long-term perspectives in the 20th century, among them Ms. ZHULian was the important one. Ms. ZHU Lian built a systemic new acupuncture" academic structure in practice and theory aspects. At the same time, as the main architect of Institute of Acupuncture-moxibustion of China Academy of Traditional Chinese Medicine, Ms. ZHU Lian was the first one who began to carry out the acupuncture clinical trail and laboratory experiment in modern way, which meant "acupuncture therapy" was transformed into "acupuncture science" by Ms. ZHULian's endeavor.

  5. Nanoimprint system development and status for high volume semiconductor manufacturing

    Science.gov (United States)

    Hiura, Hiromi; Takabayashi, Yukio; Takashima, Tsuneo; Emoto, Keiji; Choi, Jin; Schumaker, Phil

    2016-10-01

    Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash Imprint Lithography* (J-FIL*) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. There are many criteria that determine whether a particular technology is ready for wafer manufacturing. For imprint lithography, recent attention has been given to the areas of overlay, throughput, defectivity, and mask replication. This paper reviews progress in these critical areas. Recent demonstrations have proven that mix and match overlay of less than 5nm can achieved. Further reductions require a higher order correction system. Modeling and experimental data are presented which provide a path towards reducing the overlay errors to less than 3nm. Throughput is mainly impacted by the fill time of the relief images on the mask. Improvement in resist materials provides a solution that allows 15 wafers per hour per station, or a tool throughput of 60 wafers per hour. Defectivity and mask life play a significant role relative to meeting the cost of ownership (CoO) requirements in the production of semiconductor devices. Hard particles on a wafer or mask create the possibility of inducing a permanent defect on the mask that can impact device yield and mask life. By using material methods to reduce particle shedding and by introducing an air curtain system, the lifetime of both the master mask and the replica mask can be extended. In this work, we report results that demonstrate a path towards achieving mask lifetimes of better than 1000 wafers. Finally, on the mask side, a new replication tool, the FPA-1100NR2 is

  6. AN EXPLORATORY STUDY ON EMPLOYEE’S PERCEPTION TOWARDS LEAN MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar MEHTA

    2012-01-01

    Full Text Available Lean deals with generating more value for customers by eliminating factors that are merely considered waste. Lean Manufacturing is a systematic approach to identifying and eliminating waste through continuous improvement. Lean Manufacturing uses less of everything and attains its set objectives by excellent teamwork, communication, and competent use of available resources & continuous Improvement. The present paper is an attempt to study employee’s perception towards lean manufacturing systems in gear industry.

  7. Measuring the Leanness of Manufacturing system Using Fuzzy TOPSIS : A Case Study of Parizan Sanat Company

    Directory of Open Access Journals (Sweden)

    Akram, Rasoul

    2013-11-01

    Full Text Available The implementation of lean manufacturing concepts has had a significant impact on various industries. Many companies around the world have attempted to implement lean manufacturing, but the lack of an obvious understanding of lean measurement and its performance has caused its implementation to fail. This paper presents an innovative approach by using fuzzy TOPSIS to measure the production leanness of manufacturing systems, as a paradigm. This approach is applied to the Parizan Sanat company.

  8. Additive Manufacturing of Parts and Tooling in Robotic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Love, Lonnie J. [ORNL; Hassen, Ahmed A. [ORNL; Chesser, Phillip C. [ORNL; Parsons, Jeremy [Mantaro Networks, Inc.

    2018-04-01

    ORNL worked with Transcend Robotics, LLC to explore additive manufacturing of the two-piece compression body for their ARTI mobile robot platform. Extrusion compression molding was identified as an effective means of manufacturing these parts. ORNL consulted on modifications to the housing design to accommodate the selected manufacturing process. Parts were printed using ORNL's FDM machines for testing and evaluation of the design as a precursor to molding the parts. The assembly and evaluation of the parts proved favorable and minor design changes to improve assembly and performance were identified.The goal is to develop a light weight and rugged two-part robotic enclosure for an unmanned ground vehicle UGV) that will be used in search and rescue applications. The FDM parts fabricated by ORNL allowed Transcend Robotics to assemble a prototype robot and verify that the new parts will meet the performance requirements. ORNL fabricated enclosure parts out of ABS and Nylon 12 materials such that the design could be tested prior to fabricating tooling for compression molding of Nylon 6 with carbon fiber fill. The robot was performance tested and compared with the previous manufacturing techniques and found to have superior performance.

  9. The future of intelligent manufacturing systems and human factors

    NARCIS (Netherlands)

    Vink, P.; Stahre, J.

    2006-01-01

    In this paper the results of a 3 year European project are described. In this project 20 experts in the field of human factors define the most promising way of using the European work force in manufacturing in the future. Based on discussions between the experts and participating companies and

  10. Manufacturing Advantage: Why High-Performance Work Systems Pay Off.

    Science.gov (United States)

    Appelbaum, Eileen; Bailey, Thomas; Berg, Peter; Kalleberg, Arne L.

    A study examined the relationship between high-performance workplace practices and the performance of plants in the following manufacturing industries: steel, apparel, and medical electronic instruments and imaging. The multilevel research methodology combined the following data collection activities: (1) site visits; (2) collection of plant…

  11. The Influence of Manufacturing Variations on a Crash Energy Management System

    Science.gov (United States)

    2008-09-24

    Crash Energy Management (CEM) systems protect passengers in the event of a train collision. A CEM system distributes crush throughout designated unoccupied crush zones of a passenger rail consist. This paper examines the influence of manufacturing va...

  12. Interactomes, manufacturomes and relational biology: analogies between systems biology and manufacturing systems

    Science.gov (United States)

    2011-01-01

    Background We review and extend the work of Rosen and Casti who discuss category theory with regards to systems biology and manufacturing systems, respectively. Results We describe anticipatory systems, or long-range feed-forward chemical reaction chains, and compare them to open-loop manufacturing processes. We then close the loop by discussing metabolism-repair systems and describe the rationality of the self-referential equation f = f (f). This relationship is derived from some boundary conditions that, in molecular systems biology, can be stated as the cardinality of the following molecular sets must be about equal: metabolome, genome, proteome. We show that this conjecture is not likely correct so the problem of self-referential mappings for describing the boundary between living and nonliving systems remains an open question. We calculate a lower and upper bound for the number of edges in the molecular interaction network (the interactome) for two cellular organisms and for two manufacturomes for CMOS integrated circuit manufacturing. Conclusions We show that the relevant mapping relations may not be Abelian, and that these problems cannot yet be resolved because the interactomes and manufacturomes are incomplete. PMID:21689427

  13. Analysis and Design of the Logistics System for Rope Manufacturing Plant

    Directory of Open Access Journals (Sweden)

    Sun Xue

    2017-01-01

    Full Text Available In order to promote logistics system for manufacturing plant, this paper proposed a new design for the logistics system of a rope manufacturing plant. Through the analysis in the aspects of workshop facility layout, material handling and inventory management, the original logistics system of the plant is optimized. According to the comparison of the simulation results between original and optimized design, the optimized model has the higher productive efficiency. This can provide the references for the other manufacturing plant in analysis and design of the logistics system to improve plant efficiency.

  14. A Multi-Component Automated Laser-Origami System for Cyber-Manufacturing

    Science.gov (United States)

    Ko, Woo-Hyun; Srinivasa, Arun; Kumar, P. R.

    2017-12-01

    Cyber-manufacturing systems can be enhanced by an integrated network architecture that is easily configurable, reliable, and scalable. We consider a cyber-physical system for use in an origami-type laser-based custom manufacturing machine employing folding and cutting of sheet material to manufacture 3D objects. We have developed such a system for use in a laser-based autonomous custom manufacturing machine equipped with real-time sensing and control. The basic elements in the architecture are built around the laser processing machine. They include a sensing system to estimate the state of the workpiece, a control system determining control inputs for a laser system based on the estimated data and user’s job requests, a robotic arm manipulating the workpiece in the work space, and middleware, named Etherware, supporting the communication among the systems. We demonstrate automated 3D laser cutting and bending to fabricate a 3D product as an experimental result.

  15. Performance Evaluation of Bidding-Based Multi-Agent Scheduling Algorithms for Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Antonio Gordillo

    2014-10-01

    Full Text Available Artificial Intelligence techniques have being applied to many problems in manufacturing systems in recent years. In the specific field of manufacturing scheduling many studies have been published trying to cope with the complexity of the manufacturing environment. One of the most utilized approaches is (multi agent-based scheduling. Nevertheless, despite the large list of studies reported in this field, there is no resource or scientific study on the performance measure of this type of approach under very common and critical execution situations. This paper focuses on multi-agent systems (MAS based algorithms for task allocation, particularly in manufacturing applications. The goal is to provide a mechanism to measure the performance of agent-based scheduling approaches for manufacturing systems under key critical situations such as: dynamic environment, rescheduling, and priority change. With this mechanism it will be possible to simulate critical situations and to stress the system in order to measure the performance of a given agent-based scheduling method. The proposed mechanism is a pioneering approach for performance evaluation of bidding-based MAS approaches for manufacturing scheduling. The proposed method and evaluation methodology can be used to run tests in different manufacturing floors since it is independent of the workshop configuration. Moreover, the evaluation results presented in this paper show the key factors and scenarios that most affect the market-like MAS approaches for manufacturing scheduling.

  16. 76 FR 77149 - Authority To Manufacture and Distribute Postage Evidencing Systems

    Science.gov (United States)

    2011-12-12

    ... POSTAL SERVICE 39 CFR Part 501 Authority To Manufacture and Distribute Postage Evidencing Systems AGENCY: Postal Service\\TM\\. ACTION: Final rule. SUMMARY: This rule clarifies the responsibility of the... reasons stated, 39 CFR part 501 is amended as follows: PART 501--AUTHORIZATION TO MANUFACTURE AND...

  17. Using Delphi Surveying Techniques to Gather Input from Non-Academics for Development of a Modern Dairy Manufacturing Curriculum

    Science.gov (United States)

    Joyner, Helen S.; Smith, Denise

    2015-01-01

    The current face of the dairy manufacturing industry has changed from its traditional conception. Industry emphasis is moving away from traditional dairy products, such as fluid milk, ice cream, and butter, and moving toward yogurts, dairy beverages, and value-added products incorporating ingredients derived from milk and whey. However, many…

  18. Model-based Engineering for the Integration of Manufacturing Systems with Advanced Analytics

    OpenAIRE

    Lechevalier , David; Narayanan , Anantha; Rachuri , Sudarsan; Foufou , Sebti; Lee , Y Tina

    2016-01-01

    Part 3: Interoperability and Systems Integration; International audience; To employ data analytics effectively and efficiently on manufacturing systems, engineers and data scientists need to collaborate closely to bring their domain knowledge together. In this paper, we introduce a domain-specific modeling approach to integrate a manufacturing system model with advanced analytics, in particular neural networks, to model predictions. Our approach combines a set of meta-models and transformatio...

  19. Silicon Valley's Processing Needs versus San Jose State University's Manufacturing Systems Processing Component: Implications for Industrial Technology

    Science.gov (United States)

    Obi, Samuel C.

    2004-01-01

    Manufacturing professionals within universities tend to view manufacturing systems from a global perspective. This perspective tends to assume that manufacturing processes are employed equally in every manufacturing enterprise, irrespective of the geography and the needs of the people in those diverse regions. But in reality local and societal…

  20. Middle and small manufacture enterprise e-commerce application systems research

    Science.gov (United States)

    Zhu, Mingqiang

    2017-04-01

    With the extensive application of electronic commerce in manufacturing enterprises, e-commerce the influence of operation is increasingly becoming the focus of academic and business circles on the basis, this paper probes into the influence of e-commerce on the operation of the enterprise for the manufacturing enterprises to correctly understand the performance of e-commerce to provide a little help. The article first analyses e-commerce new environment on medium manufacturing enterprise requires, current medium manufacturing enterprise achieved e-commerce has many difficult, should e-commerce correctly awareness, and full planning, and points step implementation, and e-commerce and enterprise integration, and construction features of e-commerce platform, and procurement and supply chain of collaborative management, and attention customer management, and variety e-commerce of mode mixed, and flexible effective operations, and logistics socialization, views, focus on small and medium manufacturing enterprises in e-commerce applications to be innovative in design, production and management of agile and flexible production strategies.

  1. Dynamic decision-making for reliability and maintenance analysis of manufacturing systems based on failure effects

    Science.gov (United States)

    Zhang, Ding; Zhang, Yingjie

    2017-09-01

    A framework for reliability and maintenance analysis of job shop manufacturing systems is proposed in this paper. An efficient preventive maintenance (PM) policy in terms of failure effects analysis (FEA) is proposed. Subsequently, reliability evaluation and component importance measure based on FEA are performed under the PM policy. A job shop manufacturing system is applied to validate the reliability evaluation and dynamic maintenance policy. Obtained results are compared with existed methods and the effectiveness is validated. Some vague understandings for issues such as network modelling, vulnerabilities identification, the evaluation criteria of repairable systems, as well as PM policy during manufacturing system reliability analysis are elaborated. This framework can help for reliability optimisation and rational maintenance resources allocation of job shop manufacturing systems.

  2. Integrated manufacture of a freeform off-axis multi-reflective imaging system without optical alignment.

    Science.gov (United States)

    Li, Zexiao; Liu, Xianlei; Fang, Fengzhou; Zhang, Xiaodong; Zeng, Zhen; Zhu, Linlin; Yan, Ning

    2018-03-19

    Multi-reflective imaging systems find wide applications in optical imaging and space detection. However, it is faced with difficulties in adjusting the freeform mirrors with high accuracy to guarantee the optical function. Motivated by this, an alignment-free manufacture approach is proposed to machine the optical system. The direct optical performance-guided manufacture route is established without measuring the form error of freeform optics. An analytical model is established to investigate the effects of machine errors to serve the error identification and compensation in machining. Based on the integrated manufactured system, an ingenious self-designed testing configuration is constructed to evaluate the optical performance by directly measuring the wavefront aberration. Experiments are carried out to manufacture a three-mirror anastigmat, surface topographical details and optical performance shows agreement to the designed expectation. The final system works as an off-axis infrared imaging system. Results validate the feasibility of the proposed method to achieve excellent optical application.

  3. Manufacturing routes for disposable polymer blood diagnostic microfluidic systems

    DEFF Research Database (Denmark)

    Tosello, Guido; Griffiths, Christian; Azcarate, Sabino

    2008-01-01

    (Multi-Material Micro Manufacture) that are relevant to the technology for disposable polymer parts for Micro-Tele-BioChip (µTBC) medical platforms. Combining two separation mechanisms a novel micro channel design was developed. The separation unit is based on a micro channel bend structure where typical...... channel dimensions are 20 µm for the plasma channel width, and 50-75 µm for the cell channel. The height of all channels is 100 µm. The micro channel bend works simply on physical and hydrodynamic separation mechanisms without integrated actuators like pumps or valves. For the mass-fabrication of low...

  4. Academic Advising Systems: A Systematic Literature Review of Empirical Evidence

    Directory of Open Access Journals (Sweden)

    Omiros Iatrellis

    2017-12-01

    Full Text Available This paper aims to provide the reader with a comprehensive background for understanding current knowledge on Academic Advising Systems (AAS and its impact on learning. It constitutes an overview of empirical evidence behind key objectives of the potential adoption of AAS in generic educational strategic planning. The researchers examined the literature on experimental case studies conducted in the domain during the past ten years (2008–2017. Search terms identified 98 mature pieces of research work, but inclusion criteria limited the key studies to 43. The authors analyzed the research questions, methodology, and findings of these published papers and categorized them accordingly. The results have highlighted three distinct major directions of the AAS empirical research. This paper discusses the emerged added value of AAS research and highlights the significance of further implications. Finally, the authors set their thoughts on possible uncharted key questions to investigate both from pedagogical and technical considerations.

  5. Conservation of filtering in manufacturing systems with unreliable machines and finished goods buffers

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2006-01-01

    nature of manufacturing systems, this law offers a tool for selecting the smallest, that is, lean, finished goods buffering, which is necessary and sufficient to ensure the desired level ofcustomer demand satisfaction.

  6. Automatic Identification System modular receiver for academic purposes

    Science.gov (United States)

    Cabrera, F.; Molina, N.; Tichavska, M.; Araña, V.

    2016-07-01

    The Automatic Identification System (AIS) standard is encompassed within the Global Maritime Distress and Safety System (GMDSS), in force since 1999. The GMDSS is a set of procedures, equipment, and communication protocols designed with the aim of increasing the safety of sea crossings, facilitating navigation, and the rescue of vessels in danger. The use of this system not only is increasingly attractive to security issues but also potentially creates intelligence products throughout the added-value information that this network can transmit from ships on real time (identification, position, course, speed, dimensions, flag, among others). Within the marine electronics market, commercial receivers implement this standard and allow users to access vessel-broadcasted information if in the range of coverage. In addition to satellite services, users may request actionable information from private or public AIS terrestrial networks where real-time feed or historical data can be accessed from its nodes. This paper describes the configuration of an AIS receiver based on a modular design. This modular design facilitates the evaluation of specific modules and also a better understanding of the standard and the possibility of changing hardware modules to improve the performance of the prototype. Thus, the aim of this paper is to describe the system's specifications, its main hardware components, and to present educational didactics on the setup and use of a modular and terrestrial AIS receiver. The latter is for academic purposes and in undergraduate studies such as electrical engineering, telecommunications, and maritime studies.

  7. Development of Effective Academic Affairs Administration System in Thai Primary Schools

    Science.gov (United States)

    Thongnoi, Niratchakorn; Srisa-ard, Boonchom; Sri-ampai, Anan

    2013-01-01

    This research aimed to: 1) study current situations and problems of academic affairs administration system in Primary Schools. 2) develop an effective academic affairs administration system, and 3) evaluate the implementation of the developed system in the primary school, Thailand. Research and Development (R&D) was employed which consisted of…

  8. Waste reduction possibilities for manufacturing systems in the industry 4.0

    Science.gov (United States)

    Tamás, P.; Illés, B.; Dobos, P.

    2016-11-01

    The industry 4.0 creates some new possibilities for the manufacturing companies’ waste reduction for example by appearance of the cyber physical systems and the big data concept and spreading the „Internet of things (IoT)”. This paper presents in details the fourth industrial revolutions’ more important achievements and tools. In addition there will be also numerous new research directions in connection with the waste reduction possibilities of the manufacturing systems outlined.

  9. Artificial intelligence in conceptual design of intelligent manufacturing systems: A state of the art review

    OpenAIRE

    Petrović, Milica M.; Miljković, Zoran Đ.; Babić, Bojan R.

    2013-01-01

    Intelligent manufacturing systems (IMS), as the highest class of flexible manufacturing systems, are able to adapt to market changes applying methods of artificial intelligence. This paper presents a detailed review of the following IMS functions: (i) process planning optimization, (ii) scheduling optimization, (iii) integrated process planning and scheduling, and (iv) mobile robot scheduling for internal material transport tasks. The research presented in this paper shows that improved perfo...

  10. A Systematic Approach to Quality Oriented Product Sequencing for Multistage Manufacturing Systems

    OpenAIRE

    Zhang, Faping; Butt, Shahid Ikramullah

    2016-01-01

    Product sequencing is one way to reduce cost and improve product quality for multistage manufacturing systems (MMS). However, systematically evaluating the influence of product sequence on quality performance for MMS is still a challenge. By considering the rate of incoming conforming product, manufacturing system quality transition between batch to batch, and quality propagation along stages, this paper investigates the appropriate batch policies and product sequencing for MMS so that satisf...

  11. Method and Tool for Design Process Navigation and Automatic Generation of Simulation Models for Manufacturing Systems

    Science.gov (United States)

    Nakano, Masaru; Kubota, Fumiko; Inamori, Yutaka; Mitsuyuki, Keiji

    Manufacturing system designers should concentrate on designing and planning manufacturing systems instead of spending their efforts on creating the simulation models to verify the design. This paper proposes a method and its tool to navigate the designers through the engineering process and generate the simulation model automatically from the design results. The design agent also supports collaborative design projects among different companies or divisions with distributed engineering and distributed simulation techniques. The idea was implemented and applied to a factory planning process.

  12. SOME IMPORTANT FACTORS AFFECTING EVOLUTION OF ACTIVITY BASED COSTING (ABC) SYSTEM IN EGYPTIAN MANUFACTURING FIRMS

    OpenAIRE

    Karim MAMDOUH ABBAS

    2014-01-01

    The present investigation aims to determine the factors affecting evolution of Activity Based Costing (ABC) system in Egyptian case. The study used the survey method to describe and analyze these factors in some Egyptian firms. The population of the study is Egyptian manufacturing firms. Accordingly, the number of received questionnaires was 392 (23 Egyptian manufacturing firms) in the first half of 2013. Finally, the study stated some influencing factors for evolution this system (ABC) in Eg...

  13. Implementation of Reconfigurable Manufacturing Systems, the Case of The LEGO Group

    DEFF Research Database (Denmark)

    Wang, Ying; Bilberg, Arne; Hadar, Ronen

    of reconfigurable manufacturing systems (RMS). A literature review is made to describe the advantages and core characteristics of RMS. Based on the theory, a conceptual model is developed to analyze where RMS would be most suitable and have most benefits in The LEGO Group. Finally, the conclusion is drawn based...... on the analysis through the model. Keywords: Reconfigurable Manufacturing Systems, Conceptual Model of RMS, Production of The LEGO Group...

  14. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    OpenAIRE

    Paolo Renna

    2017-01-01

    Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performa...

  15. Challenges with the introduction of radio-frequency identification systems into a manufacturer's supply chain - a pilot study

    Science.gov (United States)

    Kumar, Sameer; Kadow, Brooke B.; Lamkin, Melissa K.

    2011-05-01

    As radio-frequency identification (RFID) implementation becomes more widespread it is important for managers to consider if this technology is right for their businesses. This study examines challenges of RFID implementation along with a cost-benefit analysis of a pharmaceuticals manufacturer's supply chain. Research was gathered from a variety of sources on the topic of RFID to provide an in-depth analysis of challenges and benefits found with RFID systems. Furthermore, the study reviews the real case applications of the RFID technology in healthcare and customer services. Many of the challenges with RFID stem from improper planning of the synchronisation of the supply chain and the integration of RFID technology into facilities and software systems. Customer privacy, excess information and obsolete technology are also of concern to companies considering RFID. Benefits such as increased information sharing, product visibility and real-time information help to offset these challenges. In addition, pharmaceuticals manufacturer real case application showed cost savings from reducing labour and decreased opportunities for lost product counteract the expense to implement an RFID system. This study will be of value to managers who are attempting to implement RFID technology in their companies. It is intended that readers, both academics and practitioners, will be able to identify possible challenges and mitigate them as the RFID technology is put into practice.

  16. Manufacturing at Nanoscale: Top-Down, Bottom-up and System Engineering

    International Nuclear Information System (INIS)

    Zhang Xiang; Sun Cheng; Fang, Nicholas

    2004-01-01

    The current nano-technology revolution is facing several major challenges: to manufacture nanodevices below 20 nm, to fabricate three-dimensional complex nano-structures, and to heterogeneously integrate multiple functionalities. To tackle these grand challenges, the Center for Scalable and Integrated NAno-Manufacturing (SINAM), a NSF Nanoscale Science and Engineering Center, set its goal to establish a new manufacturing paradigm that integrates an array of new nano-manufacturing technologies, including the plasmonic imaging lithography and ultramolding imprint lithography aiming toward critical resolution of 1-10 nm and the hybrid top-down and bottom-up technologies to achieve massively parallel integration of heterogeneous nanoscale components into higher-order structures and devices. Furthermore, SINAM will develop system engineering strategies to scale-up the nano-manufacturing technologies. SINAMs integrated research and education platform will shed light to a broad range of potential applications in computing, telecommunication, photonics, biotechnology, health care, and national security

  17. Manufacturing scheduling systems an integrated view on models, methods and tools

    CERN Document Server

    Framinan, Jose M; Ruiz García, Rubén

    2014-01-01

    The book is devoted to the problem of manufacturing scheduling, which is the efficient allocation of jobs (orders) over machines (resources) in a manufacturing facility. It offers a comprehensive and integrated perspective on the different aspects required to design and implement systems to efficiently and effectively support manufacturing scheduling decisions. Obtaining economic and reliable schedules constitutes the core of excellence in customer service and efficiency in manufacturing operations. Therefore, scheduling forms an area of vital importance for competition in manufacturing companies. However, only a fraction of scheduling research has been translated into practice, due to several reasons. First, the inherent complexity of scheduling has led to an excessively fragmented field in which different sub problems and issues are treated in an independent manner as goals themselves, therefore lacking a unifying view of the scheduling problem. Furthermore, mathematical brilliance and elegance has sometime...

  18. System for manufacturing wooden rotor blades for small wind mills

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, B

    1991-05-01

    Acknowledging the need (also in developing countries) for small windmill wings with various patterns and aerodynamic characteristics a simple, low-cost hand-controlled copying milling machine was built (with standard parts) to reduce production time for one wing to 1-2 hours. A sensor-roll transfers the airfoil pattern to a set of two saw blades, driven by an electric motor, which carves the airfoil out of a wooden beam. It is thus possible to cut out each cross section of the wing and manufacture a constantly reproducible rotor blade. The hard-foam airfoil models - their shapes, material and production, the laminated beam - the preparation of the wood and the lamination, and the copying milling machine itself - its design and how to build, operate and maintain it, are described in detail. (AB)

  19. Manufacture of the ALS storage ring vacuum system

    International Nuclear Information System (INIS)

    Kennedy, K.

    1990-11-01

    The Advanced Light Source (ALS) storage rings has a 4.9 meter magnetic radius and an antechamber type vacuum chamber. These two requirements makes conventional bent tube manufacturing techniques difficult. The ALS sector vacuum chambers have been made by matching two halves out of aluminum plate and welding at the mid plane. Each of these chambers have over 50 penetrations with metal sealed flanges and seven metal sealed poppet valves which use the chamber wall as the valve seat. The sector chambers are 10 meter long and some features in the chambers must be located to .25 mm. This paper describes how and how successfully these features have been achieved. 2 refs., 5 figs

  20. VIABILITY OF SOME APPLIED COST SYSTEMS IN MANUFACTURING FIRMS: EGYPT'S CASE

    Directory of Open Access Journals (Sweden)

    Karim Mamdouh ABBAS

    2015-04-01

    Full Text Available The present study aims to analyze viability of some applied cost systems. The population of the study is some Egyptian manufacturing firms. The number of received questionnaires was 385. The results indicated that , according to the application extent indicator, the currently cost systems in Egyptian manufacturing firms may be descendingly arranged as follows: Activity Based Costing (ABC system, Target Costing (TC system , Resource Consumption Accounting (RCA system, Activity Based Management (ABM ,Other systems, Theory of Constraints (TOC and Value Chain (VC analysis.

  1. A sustainable manufacturing system design: A fuzzy multi-objective optimization model.

    Science.gov (United States)

    Nujoom, Reda; Mohammed, Ahmed; Wang, Qian

    2017-08-10

    In the past decade, there has been a growing concern about the environmental protection in public society as governments almost all over the world have initiated certain rules and regulations to promote energy saving and minimize the production of carbon dioxide (CO 2 ) emissions in many manufacturing industries. The development of sustainable manufacturing systems is considered as one of the effective solutions to minimize the environmental impact. Lean approach is also considered as a proper method for achieving sustainability as it can reduce manufacturing wastes and increase the system efficiency and productivity. However, the lean approach does not include environmental waste of such as energy consumption and CO 2 emissions when designing a lean manufacturing system. This paper addresses these issues by evaluating a sustainable manufacturing system design considering a measurement of energy consumption and CO 2 emissions using different sources of energy (oil as direct energy source to generate thermal energy and oil or solar as indirect energy source to generate electricity). To this aim, a multi-objective mathematical model is developed incorporating the economic and ecological constraints aimed for minimization of the total cost, energy consumption, and CO 2 emissions for a manufacturing system design. For the real world scenario, the uncertainty in a number of input parameters was handled through the development of a fuzzy multi-objective model. The study also addresses decision-making in the number of machines, the number of air-conditioning units, and the number of bulbs involved in each process of a manufacturing system in conjunction with a quantity of material flow for processed products. A real case study was used for examining the validation and applicability of the developed sustainable manufacturing system model using the fuzzy multi-objective approach.

  2. Advantages of utilizing DMD based rapid manufacturing systems in mass customization applications

    Science.gov (United States)

    El-Siblani, A.

    2010-02-01

    The Use of DMD based Rapid Manufacturing Systems has proven to be very advantageous in the production of highly accurate plastic based components for use in mass customization market such as hearing aids, and dental markets. The voxelization process currently afforded with the DLP technology eliminates any layering effect associated with all existing additive Rapid Manufacturing technologies. The smooth accurate surfaces produced in an additive process utilizing DLP technology, through the voxelization approach, allow for the production of custom finished products. The implementation of DLP technology in rapid prototyping and rapid manufacturing systems allow for the usage of highly viscous photopolymer based liquid and paste composites for rapid manufacturing that could not be used in any other additive process prior to implementation of DLP technology in RP and RM systems. It also allowed for the greater throughput in production without sacrificing quality and accuracy.

  3. Concussion Characteristics in High School Football by Helmet Age/Recondition Status, Manufacturer, and Model: 2008-2009 Through 2012-2013 Academic Years in the United States.

    Science.gov (United States)

    Collins, Christy L; McKenzie, Lara B; Ferketich, Amy K; Andridge, Rebecca; Xiang, Huiyun; Comstock, R Dawn

    2016-06-01

    Football helmets used by high school athletes in the United States should meet the National Operating Committee on Standards for Athletic Equipment performance standards. Despite differences in interior padding and exterior shells, all football helmets should provide comparable protection against concussions. Yet, debate continues on whether differences in the rates or severity of concussions exist based on helmet age/recondition status, manufacturer, or model. To investigate whether high school football concussion characteristics varied by helmet age/recondition status, manufacturer, and model. Descriptive epidemiological study. High school football concussion and helmet data were collected from academic years 2008-2009 through 2012-2013 as part of the National High School Sports-Related Injury Surveillance Study. The certified athletic trainers of participating schools submitted athlete-exposure (AE) and injury information weekly. Participating schools reported 2900 football concussions during 3,528,790 AEs for an overall rate of 8.2 concussions per 10,000 AEs. Concussion rates significantly increased from 2008-2009 through 2012-2013 overall (P = .006) as well as in competition (P = .027) and practice (P = .023). Characteristics of concussed football players (ie, mean number of symptoms, specific concussion symptoms, symptom resolution time, and time until return to play) were similar among players wearing new helmets when compared with reconditioned helmets. Fewer players wearing an old/not reconditioned helmet had concussion symptoms resolve within 1 day compared with players wearing a new helmet. Despite differences in the manufacturers and models of helmets worn by all high school football players compared with players who sustained a concussion, the mean number of concussion symptoms, specific concussion symptoms, symptom resolution time, and time until return to play were similar for concussions sustained by football players wearing the most common helmet

  4. Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives

    Science.gov (United States)

    Zheng, Pai; wang, Honghui; Sang, Zhiqian; Zhong, Ray Y.; Liu, Yongkui; Liu, Chao; Mubarok, Khamdi; Yu, Shiqiang; Xu, Xun

    2018-06-01

    Information and communication technology is undergoing rapid development, and many disruptive technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, have emerged. These technologies are permeating the manufacturing industry and enable the fusion of physical and virtual worlds through cyber-physical systems (CPS), which mark the advent of the fourth stage of industrial production (i.e., Industry 4.0). The widespread application of CPS in manufacturing environments renders manufacturing systems increasingly smart. To advance research on the implementation of Industry 4.0, this study examines smart manufacturing systems for Industry 4.0. First, a conceptual framework of smart manufacturing systems for Industry 4.0 is presented. Second, demonstrative scenarios that pertain to smart design, smart machining, smart control, smart monitoring, and smart scheduling, are presented. Key technologies and their possible applications to Industry 4.0 smart manufacturing systems are reviewed based on these demonstrative scenarios. Finally, challenges and future perspectives are identified and discussed.

  5. Academic Training - Exploring Planets and Moons in our Solar System

    CERN Multimedia

    Françoise Benz

    2006-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 6, 7, 8, 9 June 11:00-12:00. On the 8 June from 10:00 to 12:00 - Auditorium, bldg 500 Exploring Planets and Moons in our Solar System H.O. RUCKER / Space Research Institut, Graz The lecture series comprises 5 lectures starting with the interplanetary medium, the solar wind and its interaction with magnetized planets. Knowledge on the magnetically dominated 'spheres'around the Giant Planets have been obtained by the Grand Tour of both Voyager spacecraft to Jupiter, Saturn, with the continuation of Voyager 2 to Uranus, and Neptune, in the late seventies and eighties of last century. These findings are now extensively supported and complemented by Cassini/Huygens to the Saturnian system. This will be discussed in detail in lecture 2. Specific aspects of magnetospheric physics, in particular radio emissions from the planets, observed in-situ and by remote sensing techniques, will be addressed in the following lecture 3. Of high importance are also the rec...

  6. Evaluate the system reliability for a manufacturing network with reworking actions

    International Nuclear Information System (INIS)

    Lin, Yi-Kuei; Chang, Ping-Chen

    2012-01-01

    To measure the system reliability of a manufacturing system with reworking actions is a crucial issue in industry, in which the system reliability could be one of the essential performance indicators to evaluate whether the manufacturing system is capable or not. In a manufacturing system, the input flow (raw materials/WIP) processed by each machine might be defective and thus the output flow (WIP/products) would be less than the input amount. Moreover, defective WIP/products are usually incentive to be reworked for reducing wasting and increasing output. Therefore, reworking actions are necessary to be considered in the manufacturing system. Based on the path concept, we revise such a manufacturing system as a stochastic-flow network in which the capacity of each machine is stochastic (i.e., multistate) due to the failure, partial failure, and maintenance. We decompose the network into one general processing path and several reworking paths. Subsequently, three algorithms for different network models are proposed to generate the lower boundary vector which affords to produce enough products satisfying the demand d. In terms of such a vector, the system reliability can be derived afterwards.

  7. Evaluation of Additively Manufactured Metals for Use in Oxygen Systems Project

    Science.gov (United States)

    Tylka, Jonathan; Cooper, Ken; Peralta, Stephen; Wilcutt, Terrence; Hughitt, Brian; Generazio, Edward

    2016-01-01

    Space Launch System, Commercial Resupply, and Commercial Crew programs have published intent to use additively manufactured (AM) components in propulsion systems and are likely to include various life support systems in the future. Parts produced by these types of additive manufacturing techniques have not been fully evaluated for use in oxygen systems and the inherent risks have not been fully identified. Some areas of primary concern in the SLS process with respect to oxygen compatibility may be the porosity of the printed parts, fundamental differences in microstructure of an AM part as compared to traditional materials, or increased risk of shed metal particulate into an oxygen system. If an ignition were to occur the printed material could be more flammable than components manufactured from a traditional billet of raw material and/or present a significant hazards if not identified and rigorously studied in advance of implementation into an oxygen system.

  8. Data-driven modeling and real-time distributed control for energy efficient manufacturing systems

    International Nuclear Information System (INIS)

    Zou, Jing; Chang, Qing; Arinez, Jorge; Xiao, Guoxian

    2017-01-01

    As manufacturers face the challenges of increasing global competition and energy saving requirements, it is imperative to seek out opportunities to reduce energy waste and overall cost. In this paper, a novel data-driven stochastic manufacturing system modeling method is proposed to identify and predict energy saving opportunities and their impact on production. A real-time distributed feedback production control policy, which integrates the current and predicted system performance, is established to improve the overall profit and energy efficiency. A case study is presented to demonstrate the effectiveness of the proposed control policy. - Highlights: • A data-driven stochastic manufacturing system model is proposed. • Real-time system performance and energy saving opportunity identification method is developed. • Prediction method for future potential system performance and energy saving opportunity is developed. • A real-time distributed feedback control policy is established to improve energy efficiency and overall system profit.

  9. Impact of Flexibility of Manufacturing System Components on Competitiveness of SMEs in Northern India

    Directory of Open Access Journals (Sweden)

    Shakun Preet Kaur

    2016-01-01

    Full Text Available The present manufacturing environment is characterized by a number of changes which poses challenges to a typical manufacturing unit. Time demands a shift from the traditional manufacturing strategies as they do not fit to present market competition. A flexible systems strategy has to be designed for remaining competitive in the market and perform well. For designing strategies and policies it is important to know the factors that influence performance of the system. The aim of this paper is to assess the impact of the flexibility of manufacturing system components on competitiveness of SMEs in northern India. A questionnaire based survey was conducted in the SMEs across northern India analysing three sectors namely automotive, machine tool and light engineering (mechanical components and equipment. The study contributes to the existing literature by empirically investigating the impact of machine, material handling and worker flexibility on competitiveness of manufacturing firms. This paper presents a Structural Equation Model displaying the impact of flexibility of manufacturing system components on competitiveness of SMEs.

  10. Division III Student-Athletes' Experiences of Institutional Social and Academic Systems

    Science.gov (United States)

    Becht, Louis A., Jr.

    2017-01-01

    The purpose of this qualitative study was to expand the literature on Division III student-athletes by examining their integration into the social and academic systems at one institution located in northeastern United States. This study examined participants' experiences within institutional social and academic systems designed for…

  11. Manufacturing PDMS micro lens array using spin coating under a multiphase system

    International Nuclear Information System (INIS)

    Sun, Rongrong; Yang, Hanry; Rock, D Mitchell; Danaei, Roozbeh; Panat, Rahul; Kessler, Michael R; Li, Lei

    2017-01-01

    The development of micro lens arrays has garnered much interest due to increased demand of miniaturized systems. Traditional methods for manufacturing micro lens arrays have several shortcomings. For example, they require expensive facilities and long lead time, and traditional lens materials (i.e. glass) are typically heavy, costly and difficult to manufacture. In this paper, we explore a method for manufacturing a polydimethylsiloxane (PDMS) micro lens array using a simple spin coating technique. The micro lens array, formed under an interfacial tension dominated system, and the influence of material properties and process parameters on the fabricated lens shape are examined. The lenses fabricated using this method show comparable optical properties—including surface finish and image quality—with a reduced cost and manufacturing lead time. (paper)

  12. Nonstochastic Analysis of Manufacturing Systems Using Timed-Event Graphs

    DEFF Research Database (Denmark)

    Hulgaard, Henrik; Amon, Tod

    1996-01-01

    Using automated methods to analyze the temporal behavior ofmanufacturing systems has proven to be essential and quite beneficial.Popular methodologies include Queueing networks, Markov chains,simulation techniques, and discrete event systems (such as Petrinets). These methodologies are primarily...

  13. Extraterrestrial processing and manufacturing of large space systems. Volume 3: Executive summary

    Science.gov (United States)

    Miller, R. H.; Smith, D. B. S.

    1979-01-01

    Facilities and equipment are defined for refining processes to commercial grade of lunar material that is delivered to a 'space manufacturing facility' in beneficiated, primary processed quality. The manufacturing facilities and the equipment for producing elements of large space systems from these materials and providing programmatic assessments of the concepts are also defined. In-space production processes of solar cells (by vapor deposition) and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, converters, and others are described.

  14. Supporting make or buy decision for reconfigurable manufacturing system, in multi-site context

    OpenAIRE

    BENAMA , Youssef; Alix , Thecle; PERRY , Nicolas

    2014-01-01

    Part 1: Knowledge Discovery and Sharing; International audience; The make or buy decision is a strategic issue. When looking for finding out which components or products should be manufactured or externalized then buy, capacity for human and technical resources at the workshop level as well as costs of the externalization are key questions to be answered. In the case of mobile manufacturing systems that are movable between various locations, long term strategic aspects must be considered when...

  15. Master data extraction and adaptation based on collected production data in manufacturing execution systems

    OpenAIRE

    Dimitrov, T.; Baumann, M.; Schenk, M.

    2010-01-01

    This paper presents an approach to extraction and correction of manufacturing master data, needed by Manufacturing Execution Systems (MES) to control and schedule the production. The implementation of the created schedule and the improvement of Key Performance Indicators depends strongly on the quality of the master data. The master data of most enterprises ages or the enterprises cannot fully provide it, because a highly manual expense for statistical analysis and administration is needed. T...

  16. Perception of the HACCP system operators on livestock product manufacturers.

    Science.gov (United States)

    Kim, Jung-Hyun; Nam, Ki-Chang; Jo, Cheorun; Lim, Dong-Gyun

    2014-01-01

    The purpose of this study was to investigate crucial factors on HACCP system implementation in domestic livestock product plants, and to offer job satisfaction and the career prospect of HACCP system operators. The survey was carried out by selecting 150 HACCP system operators who implemented HACCP system. The respondents claimed that the most important contents in HACCP system operation were to assemble HACCP team (21.8%), and the second was to monitoring (20.0%). Documentation and recording (16.9%) and verification (11.1%) were followed. The respondents answered the major factor in sanitation management was cleaning/washing/disinfection (18.9%) and inspection (18.4%). The results showed that there were significant differences in the prospect of occupation in HACCP system operator by the gender (p HACCP system operator were satisfied with their job (73%) and also showed optimistic prospect of occupation (82%).

  17. 77 FR 23396 - Revisions to the Requirements for Authority To Manufacture and Distribute Postage Evidencing Systems

    Science.gov (United States)

    2012-04-19

    ... Distribute Postage Evidencing Systems AGENCY: Postal Service TM . ACTION: Final rule. SUMMARY: This rule establishes the responsibility of the providers of Postage Evidencing Systems (PES) to notify the U.S. Postal... as follows: PART 501--AUTHORIZATION TO MANUFACTURE AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS 0 1. The...

  18. A system architecture for holonic manufacturing planning and control (EtoPlan)

    NARCIS (Netherlands)

    Wullink, Gerhard; Giebels, M.M.T.; Kals, H.J.J.

    2002-01-01

    In this paper, we present the system architecture of a flexible manufacturing planning and control system, named EtoPlan. The concept is based on the holonic control approach of building multiple and temporary hierarchies (holarchies). This paper describes the system architecture for flexible

  19. Last name analysis of mobility, gender imbalance, and nepotism across academic systems.

    Science.gov (United States)

    Grilli, Jacopo; Allesina, Stefano

    2017-07-18

    In biology, last names have been used as proxy for genetic relatedness in pioneering studies of neutral theory and human migrations. More recently, analyzing the last name distribution of Italian academics has raised the suspicion of nepotism, with faculty hiring their relatives for academic posts. Here, we analyze three large datasets containing the last names of all academics in Italy, researchers from France, and those working at top public institutions in the United States. Through simple randomizations, we show that the US academic system is geographically well-mixed, whereas Italian academics tend to work in their native region. By contrasting maiden and married names, we can detect academic couples in France. Finally, we detect the signature of nepotism in the Italian system, with a declining trend. The claim that our tests detect nepotism as opposed to other effects is supported by the fact that we obtain different results for the researchers hired after 2010, when an antinepotism law was in effect.

  20. Axiomatic design in large systems complex products, buildings and manufacturing systems

    CERN Document Server

    Suh, Nam

    2016-01-01

    This book provides a synthesis of recent developments in Axiomatic Design theory and its application in large complex systems. Introductory chapters provide concise tutorial materials for graduate students and new practitioners, presenting the fundamentals of Axiomatic Design and relating its key concepts to those of model-based systems engineering. A mathematical exposition of design axioms is also provided. The main body of the book, which represents a concentrated treatment of several applications, is divided into three parts covering work on: complex products; buildings; and manufacturing systems. The book shows how design work in these areas can benefit from the scientific and systematic underpinning provided by Axiomatic Design, and in so doing effectively combines the state of the art in design research with practice. All contributions were written by an international group of leading proponents of Axiomatic Design. The book concludes with a call to action motivating further research into the engineeri...

  1. Introduction of Sap ERP System Into a Heterogeneous Academic Community

    Science.gov (United States)

    Mornar, Vedran; Fertalj, Krešimir; Kalpić, Damir

    2010-06-01

    Introduction of a complex ERP system like SAP into a heterogeneous academic environment like the University of Zagreb is far from being a trivial task. The University comprises more than 30 constituents, called faculties or academies, geographically dispersed, with long and specific traditions. Financing according to the lump sum principle, enforced in Croatia as a side effect of the in Europe obligatory and omnipresent Bologna process, requires a unified view on the educational institutions in order to provide a more just and appropriate financing scheme than the current one. After the experience with own development to support educational tasks and student administration, for standard financial and administration tasks SAP has been chosen as the most appropriate platform. The developer was selected after public bidding and the authors' institution was chosen for the pilot project. The authors were playing principal roles in the process of successful deployment and still expect to offer their expertise for implementation in the rest of the University. However, serious risks stemming from lack of motivation by some constituents are present.

  2. Academic performance in terms of the applied assessment system

    Directory of Open Access Journals (Sweden)

    Arribas, José María

    2012-05-01

    Full Text Available This paper examines the academic performance depending on the evaluation and rating system used in the university. The sample under study consists of 30 subjects -taught by 35 professors to 2192 students from 7 different degrees at 14 universities of all Spain-. The results confirm that continuous assessment is the one that best results not only in terms of rate of return and success rate but also in terms of grades. En este trabajo se estudia el rendimiento académico en función del sistema de evaluación y calificación empleado en el ámbito universitario. La muestra objeto de estudio está formada por 30 asignaturas -impartidas por 35 profesores a 2192 alumnos de 7 titulaciones diferentes en 14 universidades de toda España-. Los resultados obtenidos confirman que la evaluación continua es la que propicia los mejores resultados no solo en cuanto a la Tasa de Rendimiento y a la Tasa de Éxito, sino también en cuanto a las calificaciones obtenidas.

  3. Designing of network planning system for small-scale manufacturing

    Science.gov (United States)

    Kapulin, D. V.; Russkikh, P. A.; Vinnichenko, M. V.

    2018-05-01

    The paper presents features of network planning in small-scale discrete production. The procedure of explosion of the production order, considering multilevel representation, is developed. The software architecture is offered. Approbation of the network planning system is carried out. This system allows carrying out dynamic updating of the production plan.

  4. Manufacture of Platform Prototype for Digital Safety System

    International Nuclear Information System (INIS)

    Lee, S. Y.; Kim, J. S.; Kim, J. M.

    2010-01-01

    Unit controller is a basic unit of digital safety system platform prototype. The typical unit controller is comprised of CPB(CPU board), CMB(communication board), AIB(Analog input board), AOB(Analog output board), CIB(contact input board), COB(contact output board), and a subrack. It is developed according to H/W development procedure and S/W development life cycle. A digital safety system(for example, plant protection system) is the assemblies of unit controllers. CPB performs the function of each system. DSP(digital signal processor) is built in CPB. CMB is responsible for communication between unit controllers. NSD(Network Switching Device) exchanges data between the unit controllers. Each unit controller of the platform are connected to NSD through CMB. Reliability analyses on unit controller and NSD are performed. These reliability data are used as input of technical validation

  5. Manufacturing of recombinant therapeutic proteins in microbial systems.

    Science.gov (United States)

    Graumann, Klaus; Premstaller, Andreas

    2006-02-01

    Recombinant therapeutic proteins have gained enormous importance for clinical applications. The first recombinant products have been produced in E. coli more than 20 years ago. Although with the advent of antibody-based therapeutics mammalian expression systems have experienced a major boost, microbial expression systems continue to be widely used in industry. Their intrinsic advantages, such as rapid growth, high yields and ease of manipulation, make them the premier choice for expression of non-glycosylated peptides and proteins. Innovative product classes such as antibody fragments or alternative binding molecules will further expand the use of microbial systems. Even more, novel, engineered production hosts and integrated technology platforms hold enormous potential for future applications. This review summarizes current applications and trends for development, production and analytical characterization of recombinant therapeutic proteins in microbial systems.

  6. A survey of manufacturers of solar thermal energy systems

    Science.gov (United States)

    Levine, N.; Slonski, M. L.

    1982-01-01

    Sixty-seven firms that had received funding for development of solar thermal energy systems (STES) were surveyed. The effect of the solar thermal technology systems program in accelerating (STES) were assessed. The 54 firms still developing STES were grouped into a production typology comparing the three major technologies with three basic functions. It was discovered that large and small firms were developing primarily central receiver systems, but also typically worked on more than one technology. Most medium-sized firms worked only on distributed systems. Federal support of STES was perceived as necessary to allow producers to take otherwise unacceptable risks. Approximately half of the respondents would drop out of STES if support were terminated, including a disproportionate number of medium-sized firms. A differentiated view of the technology, taking into account differing firm sizes and the various stages of technology development, was suggested for policy and planning purposes.

  7. KGS Based Control for Parking Brake Cable Manufacturing System

    OpenAIRE

    Geeta Khare; R.S. Prasad

    2011-01-01

    In today’s competitive production environment, process industries, demand a totally integrated control and optimization solution that can increase productivity, reliability and quality while minimizing cost. Automation is a step beyond mechanization. For automation of production plant either centralized or distributed control system are used. There are standardized approaches and standard hardware & software available worldwide as per the requirement. Investment in process control system is a...

  8. Tool management in manufacturing systems equipped with CNC machines

    Directory of Open Access Journals (Sweden)

    Giovanni Tani

    1997-12-01

    Full Text Available This work has been carried out for the purpose of realizing an automated system for the integrated management of tools within a company. By integrating planning, inspection and tool-room functions, automated tool management can ensure optimum utilization of tools on the selected machines, guaranteeing their effective availability. The first stage of the work consisted of defining and developing a Tool Management System whose central nucleus is a unified Data Base for all of the tools, forming part of the company's Technological Files (files on machines, materials, equipment, methods, etc., interfaceable with all of the company departments that require information on tools. The system assigns code numbers to the individual components of the tools and file them on the basis of their morphological and functional characteristics. The system is also designed to effect assemblies of tools, from which are obtained the "Tool Cards" required for compiling working cycles (CAPP, for CAM programming and for the Tool-room where the tools are physically prepared. Methods for interfacing with suitable systems for the aforesaid functions have also been devised

  9. Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

    Science.gov (United States)

    Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

    2011-05-01

    The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current `metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of

  10. Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

    International Nuclear Information System (INIS)

    Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

    2011-01-01

    The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current 'metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of

  11. Evaluating a Prototype Approach to Validating a DDS-based System Architecture for Automated Manufacturing Environments

    NARCIS (Netherlands)

    Essers, M.S.; Vaneker, Thomas H.J.

    2014-01-01

    Data Distribution Services (DDS) are emerging as communication systems in manufacturing environments. One of the key features of a DDS based system is the ability to regain performance levels after the introduction or removal of a DDS participant. In implementing a DDS participant to an existing

  12. Are Agile and Lean Manufacturing Systems Employing Sustainability, Complexity and Organizational Learning?

    Science.gov (United States)

    Flumerfelt, Shannon; Siriban-Manalang, Anna Bella; Kahlen, Franz-Josef

    2012-01-01

    Purpose: This paper aims to peruse theories and practices of agile and lean manufacturing systems to determine whether they employ sustainability, complexity and organizational learning. Design/methodology/approach: The critical review of the comparative operational similarities and difference of the two systems was conducted while the new views…

  13. Production software that works a guide to the concurrent development of realtime manufacturing systems

    CERN Document Server

    Courtright, Ann; Behuniak, John

    1991-01-01

    This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successfulcompletion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.

  14. Simulation and gaming as a support tool for lean manufacturing systems - a case example from industry

    NARCIS (Netherlands)

    van der Zee, DJ; Slomp, J; Kuhl, M.E.; Steiger, N.M.; Armstrong, F.B.; Joines, J.

    2005-01-01

    In this article we illustrate how simulation and gaming can be used to support lean manufacturing systems. More in particular we study a case example from industry - a manual assembly line for mail-inserting systems - for which we have developed a simulation game. This paper focuses on the

  15. The Components of Communication Systems in Universities: Their Influence on Academic Work Life

    Science.gov (United States)

    Uslu, Baris

    2018-01-01

    This research aimed to identify the components of communication systems in universities and to explore their influence on academic life. To collect data, interviews were carried out with academics from Australian universities. Thematic descriptive and content analyses were performed on the data-set. Analyses showed that the human relations unit,…

  16. The Influence of Academic Culture on Quality Management System ISO 9001 Maintenance within Malaysian Universities

    Science.gov (United States)

    Basir, Siti Arni; Davies, John; Douglas, Jacqueline; Douglas, Alexander

    2017-01-01

    This study investigates the influence of the elements of academic culture on quality management system ISO 9001 maintenance within Malaysian universities. There is a dearth of empirical studies on maintaining ISO 9001, particularly in the higher education context. From the literature review, academic culture was classified according to four…

  17. The Construction of the Chinese Academic System: Its History and Present Challenges

    Science.gov (United States)

    Yan, Guangcai

    2009-01-01

    The rise and development of China's academic system is a process that started from "passively accepting Western Learning" to today's "catching up with Western Learning and even exceeding it". In the last century, China experienced a turbulent and unstable social environment in which academics and politics have always been…

  18. Maltreatment, Academic Difficulty, and Systems-Involved Youth: Current Evidence and Opportunities

    Science.gov (United States)

    Stone, Susan; Zibulsky, Jamie

    2015-01-01

    Youth involved in child-serving systems of care (e.g., child welfare and juvenile justice) often exhibit specific academic performance problems. The magnitude of academic risk among these students is a serious concern given that school attachment, performance, and attainment closely relate to indicators of well-being across the lifespan. It is…

  19. Research on rapid agile metrology for manufacturing based on real-time multitask operating system

    Science.gov (United States)

    Chen, Jihong; Song, Zhen; Yang, Daoshan; Zhou, Ji; Buckley, Shawn

    1996-10-01

    Rapid agile metrology for manufacturing (RAMM) using multiple non-contact sensors is likely to remain a growing trend in manufacturing. High speed inspecting systems for manufacturing is characterized by multitasks implemented in parallel and real-time events which occur simultaneously. In this paper, we introduce a real-time operating system into RAMM research. A general task model of a class-based object- oriented technology is proposed. A general multitask frame of a typical RAMM system using OPNet is discussed. Finally, an application example of a machine which inspects parts held on a carrier strip is described. With RTOS and OPNet, this machine can measure two dimensions of the contacts at 300 parts/second.

  20. PLAT: An Automated Fault and Behavioural Anomaly Detection Tool for PLC Controlled Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Arup Ghosh

    2016-01-01

    Full Text Available Operational faults and behavioural anomalies associated with PLC control processes take place often in a manufacturing system. Real time identification of these operational faults and behavioural anomalies is necessary in the manufacturing industry. In this paper, we present an automated tool, called PLC Log-Data Analysis Tool (PLAT that can detect them by using log-data records of the PLC signals. PLAT automatically creates a nominal model of the PLC control process and employs a novel hash table based indexing and searching scheme to satisfy those purposes. Our experiments show that PLAT is significantly fast, provides real time identification of operational faults and behavioural anomalies, and can execute within a small memory footprint. In addition, PLAT can easily handle a large manufacturing system with a reasonable computing configuration and can be installed in parallel to the data logging system to identify operational faults and behavioural anomalies effectively.

  1. PLAT: An Automated Fault and Behavioural Anomaly Detection Tool for PLC Controlled Manufacturing Systems.

    Science.gov (United States)

    Ghosh, Arup; Qin, Shiming; Lee, Jooyeoun; Wang, Gi-Nam

    2016-01-01

    Operational faults and behavioural anomalies associated with PLC control processes take place often in a manufacturing system. Real time identification of these operational faults and behavioural anomalies is necessary in the manufacturing industry. In this paper, we present an automated tool, called PLC Log-Data Analysis Tool (PLAT) that can detect them by using log-data records of the PLC signals. PLAT automatically creates a nominal model of the PLC control process and employs a novel hash table based indexing and searching scheme to satisfy those purposes. Our experiments show that PLAT is significantly fast, provides real time identification of operational faults and behavioural anomalies, and can execute within a small memory footprint. In addition, PLAT can easily handle a large manufacturing system with a reasonable computing configuration and can be installed in parallel to the data logging system to identify operational faults and behavioural anomalies effectively.

  2. PEMANFAATAN IDEF0 UNTUK ANALISIS KINERJA SISTEM MANUFAKTUR (STUDI KASUS: THE ORDER HANDLING MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Slamet Budiarto

    2016-09-01

    Full Text Available The IDEF0 (Integration Definition Language 0 developed by Douglas T.Ross and SoftTech.Inc is a procedure for modeling functionality as part of the Air Force programmed on computer-aided-manufacturing which based on SADT (Structured Analisys and Design Technique. Wang and Smith (1988 suggested that IDEF0 could be combined with SSM. IDEF0 is used to analysis manufacture systems, in this case OHMS. Data from research (Budiarto, 2005 on Division of General Engineering at PT.PAL use OHMS further analyzed in this study. Data analysis shows that IDEF0 can be used to mapping activity system, both at the global as well as detail views, and performance indicators for each detail activities can be developed trough IDEF0. In addition IDEF0 can be used as a tool in providing recommendation of performance improvement of manufacturing systems.

  3. A PetriNet-Based Approach for Supporting Traceability in Cyber-Physical Manufacturing Systems.

    Science.gov (United States)

    Huang, Jiwei; Zhu, Yeping; Cheng, Bo; Lin, Chuang; Chen, Junliang

    2016-03-17

    With the growing popularity of complex dynamic activities in manufacturing processes, traceability of the entire life of every product has drawn significant attention especially for food, clinical materials, and similar items. This paper studies the traceability issue in cyber-physical manufacturing systems from a theoretical viewpoint. Petri net models are generalized for formulating dynamic manufacturing processes, based on which a detailed approach for enabling traceability analysis is presented. Models as well as algorithms are carefully designed, which can trace back the lifecycle of a possibly contaminated item. A practical prototype system for supporting traceability is designed, and a real-life case study of a quality control system for bee products is presented to validate the effectiveness of the approach.

  4. A PetriNet-Based Approach for Supporting Traceability in Cyber-Physical Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Jiwei Huang

    2016-03-01

    Full Text Available With the growing popularity of complex dynamic activities in manufacturing processes, traceability of the entire life of every product has drawn significant attention especially for food, clinical materials, and similar items. This paper studies the traceability issue in cyber-physical manufacturing systems from a theoretical viewpoint. Petri net models are generalized for formulating dynamic manufacturing processes, based on which a detailed approach for enabling traceability analysis is presented. Models as well as algorithms are carefully designed, which can trace back the lifecycle of a possibly contaminated item. A practical prototype system for supporting traceability is designed, and a real-life case study of a quality control system for bee products is presented to validate the effectiveness of the approach.

  5. Knowledge representation within information systems in manufacturing environments

    OpenAIRE

    Sharif, Amir M

    2004-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. Representing knowledge as information content alone is insufficient in providing us with an understanding of the world around us. A combination of context as well as reasoning of the information content is fundamental to representing knowledge in an information system. Knowledge Representation is typically concerned with providing structures and theories that are used as a basis for intellige...

  6. Non-invasive system for monitoring of the manufacturing equipment

    Science.gov (United States)

    Mazăre, A. G.; Belu, N.; Ionescu, L. M.; Rachieru, N.; Misztal, A.

    2017-08-01

    The automotive industry is one of the most important industries in the world that concerns the economy and the world culture. High demand has resulted in increasing of the pressure on the production lines. In conclusion, it is required more careful in monitoring of the production equipment not only for maintenance but also for staff safety and to increase the quality of production. In this paper, we propose a solution for non-invasive monitoring of the industrial equipment operation by measuring the current consumption on energy supply lines. Thus, it is determined the utilization schedule of the equipment and operation mode. Based on these measurements, it’s built an activity report for that equipment, available to the quality management and maintenance team. The solution consists of the current measuring equipment, with self-harvesting capabilities and radio transceiver, and an embedded system which run a server. The current measuring equipment will transmit data about consumption of each energy supply network line where is placed the industrial equipment. So, we have an internal measuring radio network. The embedded system will collect data for the equipment and put in a local data base and it will provide via an intranet application. The entire system not requires any supplementary energy supply and interventions in the factory infrastructure. It is experimented in a company from the automotive industries.

  7. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

    Science.gov (United States)

    Grady, Joseph E.; Haller, William J.; Poinsatte, Philip E.; Halbig, Michael C.; Schnulo, Sydney L.; Singh, Mrityunjay; Weir, Don; Wali, Natalie; Vinup, Michael; Jones, Michael G.; hide

    2015-01-01

    The research and development activities reported in this publication were carried out under NASA Aeronautics Research Institute (NARI) funded project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing." The objective of the project was to conduct evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. The results of the activities are described in three part report. The first part of the report contains the data and analysis of engine system trade studies, which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. The technical scope of activities included an assessment of the feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composites, which were accomplished by fabricating prototype engine components and testing them in simulated engine operating conditions. The manufacturing process parameters were developed and optimized for polymer and ceramic composites (described in detail in the second and third part of the report). A number of prototype components (inlet guide vane (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included turbine nozzle components. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  8. Design and Implementation of Electronic Batch Record Systems for Pharmaceutical Manufacturing Documentation

    International Nuclear Information System (INIS)

    Abdul Jalil Abd Hamid; Shafii Khamis; Rehir Dahalan

    2011-01-01

    Paper batch records have been used for decades to record procedures, the types and quantities of each material used, and the status of each step in the manufacturing process for both pharmaceuticals and medical devices. Although paper batch records are well established in its implementation, the system is laborious to maintain and prone to human error, particularly as manufacturing operations become increasingly complicated. Many pharmaceutical manufacturers are currently evaluating the feasibility of Electronic Batch Record (EBR) system. An integrated EBR system has been developed by Medical Technology Division of Nuclear Malaysia to monitor process and equipment used in the manufacture of pharmaceuticals and medical devices. The system architecture consists of an iPAN7 data processing system operating under Microsoft Windows Embedded CE 6.0 R2. The system serves as a common data bank and an input/output device for the iPAN7 processors. Full traceability from component material to finished product is maintained. Properly implemented, EBR eliminate paperwork, speed up information distribution, and provide useful tools for improving quality and efficiency. This paper discusses the general system requirements and specifications along with the hardware and software required to implement those requirements and specifications. Also discussed are problems which were encountered after initial development and plans for future development, and a plan for extending and commercializing this technology. (author)

  9. Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design

    International Nuclear Information System (INIS)

    Tan, F.L.; Fok, S.C.

    2008-01-01

    The search and selection for a suitable thermoelectric cooler (TEC) to optimize a cooling system design can be a tedious task as there are many product ranges from several TEC manufacturers. Although the manufacturers do provide proprietary manuals or electronic search facilities for their products, the process is still cumbersome as these facilities are incompatible. The electronic facilities often have different user interfaces and functionalities, while the manual facilities have different presentations of the performance characteristics. This paper presents a methodology to assist the designer to size and select the TECs from different manufacturers. The approach will allow designers to find quickly and to evaluate the devices from different TEC manufacturers. Based on the approach, the article introduces a new operational framework for an Internet based thermoelectric cooling system design process that would promote the interaction and collaboration between the designers and TEC manufacturers. It is hoped that this work would be useful for the advancement of future tools to assist designers to develop, analyze and optimize thermoelectric cooling system design in minimal time using the latest TECs available on the market

  10. Energy, economy, and environment analysis and optimization on manufacturing plant energy supply system

    International Nuclear Information System (INIS)

    Feng, Lujia; Mears, Laine; Beaufort, Cleveland; Schulte, Joerg

    2016-01-01

    Highlights: • Single objective and multicriteria optimization approaches are proposed. • Objectives of energy, economy, and environment are proved conflicting. • 3-input-5-output energy supply system of an automotive plant is studied. - Abstract: Increasing attention has recently been drawn to energy consumption in manufacturing plants. Facing the challenges from reducing emissions coupled with rising raw material prices and energy costs, manufacturers are trying to balance the energy usage strategy among the total energy consumption, economy, and environment, which can be self-conflicting at times. In this paper, energy systems in manufacturing environments are reviewed, and the current status of onsite energy system and renewable energy usage are discussed. Single objective and multicriteria optimization approaches are effectively formulated for making the best use of energy delivered to the production processes. Energy supply operation suggestions based on the optimization results are obtained. Finally, an example from an automotive assembly manufacturer is described to demonstrate the energy usage in the current manufacturing plants and how the optimization approaches can be applied to satisfy the energy management objectives. According to the optimization results, in an energy oriented operation, it takes 35% more in monetary cost; while in an economy oriented operation, it takes 17% more in megawatt hour energy supply and tends to rely more on the inexpensive renewable energy.

  11. Designing and implementation of an intelligent manufacturing system

    Directory of Open Access Journals (Sweden)

    Michael Peschl

    2011-12-01

    Full Text Available Purpose: The goal of XPRESS is to establish a breakthrough for the factory of the future with a new flexible production concept based on the generic idea of “specialized intelligent process units” (“Manufactrons” integrated in cross-sectoral learning networks for a customized production. XPRESS meets the challenge to integrate intelligence and flexibility at the “highest” level of the production control system as well as at the “lowest” level of the singular machine.Design/methodology/approach: Architecture of a manufactronic networked factory is presented, making it possible to generate particular manufactrons for the specific tasks, based on the automatic analysis of its required features.Findings: The manufactronic factory concept meets the challenge to integrate intelligence and flexibility at the “highest” level of the production control system as well as at the “lowest” level of the singular machine. The quality assurance system provided a 100% inline quality monitoring, destructive costs reduced 30%-49%, the ramp-up time for the set-up of production lines decreased up to 50% and the changeover time decreased up to 80%.Research limitations/implications: Specific features of the designed manufactronic architecture, namely the transport manufactrons, have been tested as separate mechanisms which can be merged into the final comprehensive at a later stage.Practical implications: This concept is demonstrated in the automotive and aeronautics industries, but can be easily transferred to nearly all production processes. Using the manufactronic approach, industrial players will be able to anticipate and to respond to rapidly changing consumer needs, producing high-quality products in adequate quantities while reducing costs.Originality/value: Assembly units composed of manufactrons can flexibly perform varying types of complex tasks, whereas today this is limited to a few pre-defined tasks. Additionally, radical

  12. Maintenance resources optimization applied to a manufacturing system

    International Nuclear Information System (INIS)

    Fiori de Castro, Helio; Lucchesi Cavalca, Katia

    2006-01-01

    This paper presents an availability optimization of an engineering system assembled in a series configuration, with redundancy of units and corrective maintenance resources as optimization parameters. The aim is to reach maximum availability, considering as constraints installation and corrective maintenance costs, weight and volume. The optimization method uses a Genetic Algorithm based on biological concepts of species evolution. It is a robust method, as it does not converge to a local optimum. It does not require the use of differential calculus, thus facilitating computational implementation. Results indicate that the methodology is suitable to solve a wide range of engineering design problems involving allocation of redundancies and maintenance resources

  13. Data driven CAN node reliability assessment for manufacturing system

    Science.gov (United States)

    Zhang, Leiming; Yuan, Yong; Lei, Yong

    2017-01-01

    The reliability of the Controller Area Network(CAN) is critical to the performance and safety of the system. However, direct bus-off time assessment tools are lacking in practice due to inaccessibility of the node information and the complexity of the node interactions upon errors. In order to measure the mean time to bus-off(MTTB) of all the nodes, a novel data driven node bus-off time assessment method for CAN network is proposed by directly using network error information. First, the corresponding network error event sequence for each node is constructed using multiple-layer network error information. Then, the generalized zero inflated Poisson process(GZIP) model is established for each node based on the error event sequence. Finally, the stochastic model is constructed to predict the MTTB of the node. The accelerated case studies with different error injection rates are conducted on a laboratory network to demonstrate the proposed method, where the network errors are generated by a computer controlled error injection system. Experiment results show that the MTTB of nodes predicted by the proposed method agree well with observations in the case studies. The proposed data driven node time to bus-off assessment method for CAN networks can successfully predict the MTTB of nodes by directly using network error event data.

  14. Approaches to Quality Risk Management When Using Single-Use Systems in the Manufacture of Biologics.

    Science.gov (United States)

    Ishii-Watabe, Akiko; Hirose, Akihiko; Katori, Noriko; Hashii, Norikata; Arai, Susumu; Awatsu, Hirotoshi; Eiza, Akira; Hara, Yoshiaki; Hattori, Hideshi; Inoue, Tomomi; Isono, Tetsuya; Iwakura, Masahiro; Kajihara, Daisuke; Kasahara, Nobuo; Matsuda, Hiroyuki; Murakami, Sei; Nakagawa, Taishiro; Okumura, Takehiro; Omasa, Takeshi; Takuma, Shinya; Terashima, Iyo; Tsukahara, Masayoshi; Tsutsui, Maiko; Yano, Takahiro; Kawasaki, Nana

    2015-10-01

    Biologics manufacturing technology has made great progress in the last decade. One of the most promising new technologies is the single-use system, which has improved the efficiency of biologics manufacturing processes. To ensure safety of biologics when employing such single-use systems in the manufacturing process, various issues need to be considered including possible extractables/leachables and particles arising from the components used in single-use systems. Japanese pharmaceutical manufacturers, together with single-use suppliers, members of the academia and regulatory authorities have discussed the risks of using single-use systems and established control strategies for the quality assurance of biologics. In this study, we describe approaches for quality risk management when employing single-use systems in the manufacturing of biologics. We consider the potential impact of impurities related to single-use components on drug safety and the potential impact of the single-use system on other critical quality attributes as well as the stable supply of biologics. We also suggest a risk-mitigating strategy combining multiple control methods which includes the selection of appropriate single-use components, their inspections upon receipt and before releasing for use and qualification of single-use systems. Communication between suppliers of single-use systems and the users, as well as change controls in the facilities both of suppliers and users, are also important in risk-mitigating strategies. Implementing these control strategies can mitigate the risks attributed to the use of single-use systems. This study will be useful in promoting the development of biologics as well as in ensuring their safety, quality and stable supply.

  15. Information system and website design to support theautomotive manufacture ERP system

    Science.gov (United States)

    Amran, T. G.; Azmi, N.; Surjawati, A. A.

    2017-12-01

    This research is to create an on-time production system design with Heijunka model so that the product diversity for all models could meet time and capacity requirements, own production flexibility, high quality, meet the customers’ demands, realistic in production as well as creating a web-based local components’ order information system that supports the Enterprise Resource Planning (ERP) system. The Heijunka model for equalization with heuristic and stochastic model has been implemented for productions up to 3000 units by implementing Suzuki International Manufacturing. The inefficiency in the local order information system demanded the need for a new information system design that is integrated in ERP. Kaizen needs to be done is the Supplier Network that all vendors can download and utilize those data to deliver the components to the company and for vendors’ internal uses as well. The model design is presumed effective where the model is able to be utilized as a solution so that the production can run according to the schedule and presumed efficient were the model is able to show the reduction of loss time and stock.

  16. Review of Polyimides Used in the Manufacturing of Micro Systems

    Science.gov (United States)

    Wilson, William C.; Atkinson, Gary M.

    2007-01-01

    Since their invention, polyimides have found numerous uses in MicroElectroMechanical Systems (MEMS) technology. Polyimides can act as photoresist, sacrificial layers, structural layers, and even as a replacement for silicon as the substrate during MEMS fabrication. They enable fabrication of both low and high aspect ratio devices. Polyimides have been used to fabricate expendable molds and reusable flexible molds. Development of a variety of devices that employ polyimides for sensor applications has occurred. Micro-robotic actuator applications include hinges, thermal actuators and residual stress actuators. Currently, polyimides are being used to create new sensors and devices for aerospace applications. This paper presents a review of some of the many uses of polyimides in the development of MEMS devices, including a new polyimide based MEMS fabrication process.

  17. Knowledge network model of the energy consumption in discrete manufacturing system

    Science.gov (United States)

    Xu, Binzi; Wang, Yan; Ji, Zhicheng

    2017-07-01

    Discrete manufacturing system generates a large amount of data and information because of the development of information technology. Hence, a management mechanism is urgently required. In order to incorporate knowledge generated from manufacturing data and production experience, a knowledge network model of the energy consumption in the discrete manufacturing system was put forward based on knowledge network theory and multi-granularity modular ontology technology. This model could provide a standard representation for concepts, terms and their relationships, which could be understood by both human and computer. Besides, the formal description of energy consumption knowledge elements (ECKEs) in the knowledge network was also given. Finally, an application example was used to verify the feasibility of the proposed method.

  18. A mathematical model in cellular manufacturing system considering subcontracting approach under constraints

    Directory of Open Access Journals (Sweden)

    Kamran Forghani

    2012-10-01

    Full Text Available In this paper, a new mathematical model in cellular manufacturing systems (CMSs has been presented. In order to increase the performance of manufacturing system, the production quantity of parts has been considered as a decision variable, i.e. each part can be produced and outsourced, simultaneously. This extension would be minimized the unused capacity of machines. The exceptional elements (EEs are taken into account and would be totally outsourced to the external supplier in order to remove intercellular material handling cost. The problem has been formulated as a mixed-integer programming to minimize the sum of manufacturing variable costs under budget, machines capacity and demand constraints. Also, to evaluate advantages of the model, several illustrative numerical examples have been provided to compare the performance of the proposed model with the available classical approaches in the literature.

  19. Readiness Assessment Towards Smart Manufacturing System for Tuna Processing Industry in Indonesia

    Science.gov (United States)

    Anggrahini, D.; Kurniati, N.; Karningsih, P. D.; Parenreng, S. M.; Syahroni, N.

    2018-04-01

    Marine product processing is one of the top priority clusters in the national development. Tuna, as a kind of deep ocean fishes, has the highest number of production that significantly increased throughout the years. Indonesia government encourages tuna processing industry, which are mostly dominated by small to medium enterprises, to grow continuously. Nowadays, manufacturers are facing substantial challenges in adopting modern system and technology that will lead a significant improvement through the internet of things (IoT). A smart factory transform integrated manufacturing process, in a high speed processing to respond customer needs. It has some positive impacts, such as increasing productivity, reducing set up time, shortening marketing and other support activities, hence the process is being more flexible and efficient. To implement smart manufacturing system, factories should know the readiness at any level of them, technology capability and strategy appropriateness. This exploratory study aims to identify the criterias, and develop an assessment tools to measure the level towards smart factory.

  20. System of error detection in the manufacture of garments using artificial vision

    Science.gov (United States)

    Moreno, J. J.; Aguila, A.; Partida, E.; Martinez, C. L.; Morales, O.; Tejeida, R.

    2017-12-01

    A computer vision system is implemented to detect errors in the cutting stage within the manufacturing process of garments in the textile industry. It provides solution to errors within the process that cannot be easily detected by any employee, in addition to significantly increase the speed of quality review. In the textile industry as in many others, quality control is required in manufactured products and this has been carried out manually by means of visual inspection by employees over the years. For this reason, the objective of this project is to design a quality control system using computer vision to identify errors in the cutting stage within the garment manufacturing process to increase the productivity of textile processes by reducing costs.

  1. Scalable Manufacturing of Solderable and Stretchable Physiologic Sensing Systems.

    Science.gov (United States)

    Kim, Yun-Soung; Lu, Jesse; Shih, Benjamin; Gharibans, Armen; Zou, Zhanan; Matsuno, Kristen; Aguilera, Roman; Han, Yoonjae; Meek, Ann; Xiao, Jianliang; Tolley, Michael T; Coleman, Todd P

    2017-10-01

    Methods for microfabrication of solderable and stretchable sensing systems (S4s) and a scaled production of adhesive-integrated active S4s for health monitoring are presented. S4s' excellent solderability is achieved by the sputter-deposited nickel-vanadium and gold pad metal layers and copper interconnection. The donor substrate, which is modified with "PI islands" to become selectively adhesive for the S4s, allows the heterogeneous devices to be integrated with large-area adhesives for packaging. The feasibility for S4-based health monitoring is demonstrated by developing an S4 integrated with a strain gauge and an onboard optical indication circuit. Owing to S4s' compatibility with the standard printed circuit board assembly processes, a variety of commercially available surface mount chip components, such as the wafer level chip scale packages, chip resistors, and light-emitting diodes, can be reflow-soldered onto S4s without modifications, demonstrating the versatile and modular nature of S4s. Tegaderm-integrated S4 respiration sensors are tested for robustness for cyclic deformation, maximum stretchability, durability, and biocompatibility for multiday wear time. The results of the tests and demonstration of the respiration sensing indicate that the adhesive-integrated S4s can provide end users a way for unobtrusive health monitoring. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  3. Does academic assessment system type affect levels of academic stress in medical students? A cross-sectional study from Pakistan

    Directory of Open Access Journals (Sweden)

    Madiha Ali

    2015-06-01

    Full Text Available Introduction: Stress among medical students induced by academic pressures is on the rise among the student population in Pakistan and other parts of the world. Our study examined the relationship between two different systems employed to assess academic performance and the levels of stress among students at two different medical schools in Karachi, Pakistan. Methods: A sample consisting of 387 medical students enrolled in pre-clinical years was taken from two universities, one employing the semester examination system with grade point average (GPA scores (a tiered system and the other employing an annual examination system with only pass/fail grading. A pre-designed, self-administered questionnaire was distributed. Test anxiety levels were assessed by The Westside Test Anxiety Scale (WTAS. Overall stress was evaluated using the Perceived Stress Scale (PSS. Results: There were 82 males and 301 females while four did not respond to the gender question. The mean age of the entire cohort was 19.7±1.0 years. A total of 98 participants were from the pass/fail assessment system while 289 were from the GPA system. There was a higher proportion of females in the GPA system (85% vs. 59%; p<0.01. Students in the pass/fail assessment system had a lower score on the WTAS (2.4±0.8 vs. 2.8±0.7; p=0.01 and the PSS (17.0±6.7 vs. 20.3±6.8; p<0.01, indicating lower levels of test anxiety and overall stress than in students enrolled in the GPA assessment system. More students in the pass/fail system were satisfied with their performance than those in the GPA system. Conclusion: Based on the present study, we suggest governing bodies to revise and employ a uniform assessment system for all the medical colleges to improve student academic performance and at the same time reduce stress levels. Our results indicate that the pass/fail assessment system accomplishes these objectives.

  4. A Multi-User Remote Academic Laboratory System

    Science.gov (United States)

    Barrios, Arquimedes; Panche, Stifen; Duque, Mauricio; Grisales, Victor H.; Prieto, Flavio; Villa, Jose L.; Chevrel, Philippe; Canu, Michael

    2013-01-01

    This article describes the development, implementation and preliminary operation assessment of Multiuser Network Architecture to integrate a number of Remote Academic Laboratories for educational purposes on automatic control. Through the Internet, real processes or physical experiments conducted at the control engineering laboratories of four…

  5. Complex systems, multilingualism and academic success in South ...

    African Journals Online (AJOL)

    In South Africa, students are multilingual and this is often ignored or perceived as a hindrance to academic success. Conversely, there are studies that have found a positive relationship between bi- and multilingualism and cognitive development during the past 40 years. The aim of this article is to view multilingualism and ...

  6. ACADEMIC MOTIVATION AMONG URBAN & RURAL STUDENTS: A Study on Traditional Vs Open Education System in India

    Directory of Open Access Journals (Sweden)

    Shashi SINGH

    2011-10-01

    Full Text Available Higher education today is being viewed as a tool to achieve prosperity and high living standards. It is thus looked upon as a service to the society and a powerful weapon to change the society for its betterment. Motivation plays a crucial role in learning. Motivation energizes the behavior of the individual. It also directs the behavior towards specific goals. It helps in acquisition of knowledge, develops social qualities, increases initiation of persistence in activities, leads to improved performance and develops a sense of discipline in the individual. This paper aims to compare Open Education System and Traditional Education System with respect to Academic Motivation of students towards the two types of education systems. This paper also tries to compare the academic motivation of rural and urban based students. It has been found in this paper that there is significant different in Academic Motivation among students of the two types of education systems. The significant difference in academic motivation has also been found in urban and rural based students, compared between the two systems. The paper has also forwarded some suggestions which may be considered by the policy makers and administrators of OES to help increase the academic motivation of students of OES.Academic Motivation, Traditional Education System, Open Education System, Higher Education System, Rural based students, and Urban based students

  7. Development of STEP-NC Adaptor for Advanced Web Manufacturing System

    Science.gov (United States)

    Ajay Konapala, Mr.; Koona, Ramji, Dr.

    2017-08-01

    Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

  8. A simulation study of capacity utilization to predict future capacity for manufacturing system sustainability

    Science.gov (United States)

    Rimo, Tan Hauw Sen; Chai Tin, Ong

    2017-12-01

    Capacity utilization (CU) measurement is an important task in a manufacturing system, especially in make-to-order (MTO) type manufacturing system with product customization, in predicting capacity to meet future demand. A stochastic discrete-event simulation is developed using ARENA software to determine CU and capacity gap (CG) in short run production function. This study focused on machinery breakdown and product defective rate as random variables in the simulation. The study found that the manufacturing system run in 68.01% CU and 31.99% CG. It is revealed that machinery breakdown and product defective rate have a direct relationship with CU. By improving product defective rate into zero defect, manufacturing system can improve CU up to 73.56% and CG decrease to 26.44%. While improving machinery breakdown into zero breakdowns will improve CU up to 93.99% and the CG decrease to 6.01%. This study helps operation level to study CU using “what-if” analysis in order to meet future demand in more practical and easier method by using simulation approach. Further study is recommended by including other random variables that affect CU to make the simulation closer with the real-life situation for a better decision.

  9. Research contributions to the modelling and design of Intelligent Manufacturing Systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Sørensen, Christian; Stylios, C.

    1999-01-01

    This joint paper is the result of the work of cluster 3-4 within the Esprit WG no. 21955 on Intelligent Manufacturing Systems (IMS) working group. The paper conveys the results of a co-operative research effort between LAR Patras (Greece), DTU (Denmark), CRAN/GSIP (France) and Aachen WZL (Germany...

  10. Mixed reality system and objective ergonomics evaluation for designing work stations in manufacturing industry

    NARCIS (Netherlands)

    Rhijn, J.W. van; Bosch, T.; Looze, M.P. de

    2011-01-01

    Due to shorter productlife cycles in manufacturing industry there is a lot of pressure on the process of designing new work systems. Early attention for human factors would lower the costs compared to changes at a later stage. Low cost tools for workstations design could help especially small to

  11. The elaboration of a manufacturing flow connectivity model, based on Multi Agent System

    Directory of Open Access Journals (Sweden)

    Fahhama Lamyae

    2017-01-01

    The aim of this paper was to establish a model of the industrial flow connectivity; Afterward, we’ve detailed a network configuration model based on the multi-agents systems, to study the interactions between all the actors and give a more realistic vision onto manufacturing coordination in the supply chain.

  12. Towards an integration of process planning and production planning and control for flexible manufacturing systems

    NARCIS (Netherlands)

    Gaalman, GJC; Slomp, J; Suresh, NC

    This introduction article attempts to present some major issues relating to the integration of process planning and production planning and control (PPC) for flexible manufacturing systems (FMSs). It shows that the performance of an FMS can be significantly improved and FMS capabilities more

  13. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Gregorius Satia Budhi

    2003-01-01

    Full Text Available Flexible Manufacturing System (FMS is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC approach was used as the weight to search the operation route in the proper machine, so that the total production cost can be optimized. The search method that was used in this experiment is Simulated Annealling, a variant form Hill Climbing Search method. An ideal operation time to proses a part was used as the annealling schedule. From the empirical test, it could be proved that the use of ABC approach and Simulated Annealing to search the route (routing process can optimize the Total Production Cost. In the other hand, the use of ideal operation time to process a part as annealing schedule can control the processing time well. Abstract in Bahasa Indonesia : Flexible Manufacturing System (FMS adalah sistem manufaktur yang tersusun dari mesin-mesin Numerical Control (NC yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin-mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC digunakan sebagai bobot / weight dalam pencarian rute operasi pada mesin yang tepat, untuk lebih mengoptimasi biaya produksi secara keseluruhan. Adapun metode Searching yang digunakan adalah Simulated Annealing yang merupakan varian dari metode searching Hill Climbing. Waktu operasi ideal untuk memproses sebuah part digunakan sebagai Annealing Schedulenya. Dari hasil pengujian empiris dapat dibuktikan bahwa penggunaan pendekatan ABC dan Simulated Annealing untuk proses pencarian rute (routing dapat lebih

  14. The need for academic electronic health record systems in nurse education.

    Science.gov (United States)

    Chung, Joohyun; Cho, Insook

    2017-07-01

    The nursing profession has been slow to incorporate information technology into formal nurse education and practice. The aim of this study was to identify the use of academic electronic health record systems in nurse education and to determine student and faculty perceptions of academic electronic health record systems in nurse education. A quantitative research design with supportive qualitative research was used to gather information on nursing students' perceptions and nursing faculty's perceptions of academic electronic health record systems in nurse education. Eighty-three participants (21 nursing faculty and 62 students), from 5 nursing schools, participated in the study. A purposive sample of 9 nursing faculty was recruited from one university in the Midwestern United States to provide qualitative data for the study. The researcher-designed surveys (completed by faculty and students) were used for quantitative data collection. Qualitative data was taken from interviews, which were transcribed verbatim for analysis. Students and faculty agreed that academic electronic health record systems could be useful for teaching students to think critically about nursing documentation. Quantitative and qualitative findings revealed that academic electronic health record systems regarding nursing documentation could help prepare students for the future of health information technology. Meaningful adoption of academic electronic health record systems will help in building the undergraduate nursing students' competence in nursing documentation with electronic health record systems. Copyright © 2017. Published by Elsevier Ltd.

  15. Configuration of management accounting information system for multi-stage manufacturing

    Science.gov (United States)

    Mkrtychev, S. V.; Ochepovsky, A. V.; Enik, O. A.

    2018-05-01

    The article presents an approach to configuration of a management accounting information system (MAIS) that provides automated calculations and the registration of normative production losses in multi-stage manufacturing. The use of MAIS with the proposed configuration at the enterprises of textile and woodworking industries made it possible to increase the accuracy of calculations for normative production losses and to organize accounting thereof with the reference to individual stages of the technological process. Thus, high efficiency of multi-stage manufacturing control is achieved.

  16. The Management of Manufacturing-Oriented Informatics Systems Using Efficient and Flexible Architectures

    Directory of Open Access Journals (Sweden)

    Constantin Daniel AVRAM

    2011-01-01

    Full Text Available Industry and in particular the manufacturing-oriented sector has always been researched and innovated as a result of technological progress, diversification and differentiation among consumers' demands. A company that provides to its customers products matching perfectly their demands at competitive prices has a great advantage over its competitors. Manufacturing-oriented information systems are becoming more flexible and configurable and they require integration with the entire organization. This can be done using efficient software architectures that will allow the coexistence between commercial solutions and open source components while sharing computing resources organized in grid infrastructures and under the governance of powerful management tools.

  17. A Novel Feed-Forward Modeling System Leads to Sustained Improvements in Attention and Academic Performance.

    Science.gov (United States)

    McDermott, Ashley F; Rose, Maya; Norris, Troy; Gordon, Eric

    2016-01-28

    This study tested a novel feed-forward modeling (FFM) system as a nonpharmacological intervention for the treatment of ADHD children and the training of cognitive skills that improve academic performance. This study implemented a randomized, controlled, parallel design comparing this FFM with a nonpharmacological community care intervention. Improvements were measured on parent- and clinician-rated scales of ADHD symptomatology and on academic performance tests completed by the participant. Participants were followed for 3 months after training. Participants in the FFM training group showed significant improvements in ADHD symptomatology and academic performance, while the control group did not. Improvements from FFM were sustained 3 months later. The FFM appeared to be an effective intervention for the treatment of ADHD and improving academic performance. This FFM training intervention shows promise as a first-line treatment for ADHD while improving academic performance. © The Author(s) 2016.

  18. Sustainable design and manufacturing of multifunctional polymer nanocomposite coatings: A multiscale systems approach

    Science.gov (United States)

    Xiao, Jie

    Polymer nanocomposites have a great potential to be a dominant coating material in a wide range of applications in the automotive, aerospace, ship-making, construction, and pharmaceutical industries. However, how to realize design sustainability of this type of nanostructured materials and how to ensure the true optimality of the product quality and process performance in coating manufacturing remain as a mountaintop area. The major challenges arise from the intrinsic multiscale nature of the material-process-product system and the need to manipulate the high levels of complexity and uncertainty in design and manufacturing processes. This research centers on the development of a comprehensive multiscale computational methodology and a computer-aided tool set that can facilitate multifunctional nanocoating design and application from novel function envisioning and idea refinement, to knowledge discovery and design solution derivation, and further to performance testing in industrial applications and life cycle analysis. The principal idea is to achieve exceptional system performance through concurrent characterization and optimization of materials, product and associated manufacturing processes covering a wide range of length and time scales. Multiscale modeling and simulation techniques ranging from microscopic molecular modeling to classical continuum modeling are seamlessly coupled. The tight integration of different methods and theories at individual scales allows the prediction of macroscopic coating performance from the fundamental molecular behavior. Goal-oriented design is also pursued by integrating additional methods for bio-inspired dynamic optimization and computational task management that can be implemented in a hierarchical computing architecture. Furthermore, multiscale systems methodologies are developed to achieve the best possible material application towards sustainable manufacturing. Automotive coating manufacturing, that involves paint spay and

  19. A Technical and Business Perspective on Wireless Sensor Network for Manufacturing Execution System

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2015-01-01

    Full Text Available Motivated by the complex production management with difficulties in error-prone assembly system and inaccurate supply chain inventory, this paper designs a novel manufacturing execution system (MES architecture for intelligent monitoring based on wireless sensor network (WSN. The technical perspective includes analysis on the proposed manufacturing resource mutual inductance method under active sensing network, appreciation technology of multisource information, and dynamic optimization technology for manufacturing execution processes. From business perspective, this paper elaborates the impact of RFID investment on complex product by establishing a three-stage supply chain model that involves two suppliers carrying out Stackelberg games (manufacturer and retailer. The optimal cost threshold values of technology investment are examined for both the centralized and the decentralized scenarios utilizing quantitative modeling methods. By analyzing and comparing the optimal profit with or without investment on WSN, this paper establishes a supply chain coordination and boosting model. The results of this paper have contributed significantly for one to make decision on whether RFID should be adopted among its members in supply chain. The system performance and model extension are verified via numerical analyses.

  20. The relationship among customer demand, competitive strategy and manufacturing system functional objectives

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2013-09-01

    Full Text Available Purpose: To ascertain the relationship between the operation system function goal decision making and customer demand and competition strategy, can better discover and integrate all available resources (including important capital resources to achieve business opportunities, the establishment of sustainable competitive ability. Because, to achieve business development lead policymakers take great uncertainty, which led to the investment behavior required for the operational activities of resources also bear the enormous risks. Design/methodology/approach: Through principal component analysis on the data collected by questionnaires, the manuscript obtains dominant factors for customer demand, competitive strategy and manufacturing system functional objectives respectively. By these factors, it tests its three hypotheses with the data from northeast of China and draws some conclusions. Findings: The results show that customer demand have a significant positive effect on competitive strategy; competitive strategy have positive influence on manufacturing system functional objectives; customer demand affect the functional objectives, by competitive strategy. Research limitations/implications: In this research, competitive strategy and manufacturing system functional objectives are influenced by customer demand. The conclusion of the research can provide theoretical guidance for Chinese enterprises which carry out manufacturing system functional objectives. Originality/value: In this research, a new measure questionnaire of competition strategy, customer satisfaction and operating system function goal was used, analyzed the influence factors of time, quality, cost, efficiency, service and environment, on the operation of the system. The study shows that the effect of competition strategy and customer demand has a direct impact on the operating system functions, customer demand through competitive strategy of indirect effects operating system functions.

  1. Design of an automatic production monitoring system on job shop manufacturing

    Science.gov (United States)

    Prasetyo, Hoedi; Sugiarto, Yohanes; Rosyidi, Cucuk Nur

    2018-02-01

    Every production process requires monitoring system, so the desired efficiency and productivity can be monitored at any time. This system is also needed in the job shop type of manufacturing which is mainly influenced by the manufacturing lead time. Processing time is one of the factors that affect the manufacturing lead time. In a conventional company, the recording of processing time is done manually by the operator on a sheet of paper. This method is prone to errors. This paper aims to overcome this problem by creating a system which is able to record and monitor the processing time automatically. The solution is realized by utilizing electric current sensor, barcode, RFID, wireless network and windows-based application. An automatic monitoring device is attached to the production machine. It is equipped with a touch screen-LCD so that the operator can use it easily. Operator identity is recorded through RFID which is embedded in his ID card. The workpiece data are collected from the database by scanning the barcode listed on its monitoring sheet. A sensor is mounted on the machine to measure the actual machining time. The system's outputs are actual processing time and machine's capacity information. This system is connected wirelessly to a workshop planning application belongs to the firm. Test results indicated that all functions of the system can run properly. This system successfully enables supervisors, PPIC or higher level management staffs to monitor the processing time quickly with a better accuracy.

  2. Using the AHP Method to Select an ERP System for an SME Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Kłos Sławomir

    2014-09-01

    Full Text Available This paper proposes the application of the Analytic Hierarchy Process method to support decision making regarding the selection of an Enterprise Resource Planning system in a manufacturing company. The main assumption of the work is that the management of the selection of an ERP system should consider that the most important selection criteria are concerned with the functionality of the ERP system. Besides this, the aspects of total cost of ownership, technical support and implementation time or vendor experience are taken into consideration to guarantee a successful ERP implementation. The proposed procedure of an ERP system selection is dedicated for small and medium manufacturing enterprises. A structure of attributes for the AHP method is proposed on the basis of an analysis and identification of critical success factors. Different kinds of production (make-to-stock, make-to-order and engineer-to-order are taken into consideration. Illustrative examples are also given.

  3. Head-worn display-based augmented reality system for manufacturing

    Science.gov (United States)

    Sarwal, Alok; Baker, Chris; Filipovic, Dragan

    2005-05-01

    This system provides real-time guidance for training and problem-solving on production-line machinery. A prototype of a wearable, real-time, video guidance, interactive system for use in manufacturing, has been developed and demonstrated. Anticipated benefits are: relatively inexperienced personnel can provide machine servicing and the dependency on the vendor to repair or maintain equipment is significantly reduced. Additionally, servicing, training or part change-over schedules can be exercised more predictably and with less training. This approach utilizes Head Worn Display or Head Mounted Display (HMD) technology that can be readily adapted for various machines on the factory floor with training steps for a new location. Such a system can support various applications in manufacturing such as direct video guiding or applying scheduled maintenance and training to effectively resolve servicing emergencies and reduce machine downtime. It can also provide training of inexperienced operators and maintenance personnel. The gap between production line complexity and ability of production personnel to effectively maintain equipment is expected to widen in the future and advanced equipment will require complex servicing procedures that are neither well documented nor user-friendly. This system offers benefits in increased manufacturing equipment availability by facilitating effective servicing and training and can interface to a server system for additional computational resources on an as-needed basis. This system utilizes markers to guide the user and enforces a well defined sequence of operations. It performs augmentation of information on the display in order to provide guidance in real-time.

  4. A Multi-Agent Approach to the Simulation of Robotized Manufacturing Systems

    Science.gov (United States)

    Foit, K.; Gwiazda, A.; Banaś, W.

    2016-08-01

    The recent years of eventful industry development, brought many competing products, addressed to the same market segment. The shortening of a development cycle became a necessity if the company would like to be competitive. Because of switching to the Intelligent Manufacturing model the industry search for new scheduling algorithms, while the traditional ones do not meet the current requirements. The agent-based approach has been considered by many researchers as an important way of evolution of modern manufacturing systems. Due to the properties of the multi-agent systems, this methodology is very helpful during creation of the model of production system, allowing depicting both processing and informational part. The complexity of such approach makes the analysis impossible without the computer assistance. Computer simulation still uses a mathematical model to recreate a real situation, but nowadays the 2D or 3D virtual environments or even virtual reality have been used for realistic illustration of the considered systems. This paper will focus on robotized manufacturing system and will present the one of possible approaches to the simulation of such systems. The selection of multi-agent approach is motivated by the flexibility of this solution that offers the modularity, robustness and autonomy.

  5. Human-directed local autonomy for motion guidance and coordination in an intelligent manufacturing system

    Science.gov (United States)

    Alford, W. A.; Kawamura, Kazuhiko; Wilkes, Don M.

    1997-12-01

    This paper discusses the problem of integrating human intelligence and skills into an intelligent manufacturing system. Our center has jointed the Holonic Manufacturing Systems (HMS) Project, an international consortium dedicated to developing holonic systems technologies. One of our contributions to this effort is in Work Package 6: flexible human integration. This paper focuses on one activity, namely, human integration into motion guidance and coordination. Much research on intelligent systems focuses on creating totally autonomous agents. At the Center for Intelligent Systems (CIS), we design robots that interact directly with a human user. We focus on using the natural intelligence of the user to simplify the design of a robotic system. The problem is finding ways for the user to interact with the robot that are efficient and comfortable for the user. Manufacturing applications impose the additional constraint that the manufacturing process should not be disturbed; that is, frequent interacting with the user could degrade real-time performance. Our research in human-robot interaction is based on a concept called human directed local autonomy (HuDL). Under this paradigm, the intelligent agent selects and executes a behavior or skill, based upon directions from a human user. The user interacts with the robot via speech, gestures, or other media. Our control software is based on the intelligent machine architecture (IMA), an object-oriented architecture which facilitates cooperation and communication among intelligent agents. In this paper we describe our research testbed, a dual-arm humanoid robot and human user, and the use of this testbed for a human directed sorting task. We also discuss some proposed experiments for evaluating the integration of the human into the robot system. At the time of this writing, the experiments have not been completed.

  6. Time-of-use based electricity demand response for sustainable manufacturing systems

    International Nuclear Information System (INIS)

    Wang, Yong; Li, Lin

    2013-01-01

    As required by the Energy Policy Act of 2005, utility companies across the U.S. are offering TOU (time-of-use) based electricity demand response programs. The TOU rate gives consumers opportunities to manage their electricity bill by shifting use from on-peak periods to mid-peak and off-peak periods. Reducing the amount of electricity needed during the peak load times makes it possible for the power grid to meet consumers' needs without building more costly backup infrastructures and help reduce GHG (greenhouse gas) emissions. Previous research on the applications of TOU and other electricity demand response programs has been mainly focused on residential and commercial buildings while largely neglected industrial manufacturing systems. This paper proposes a systems approach for TOU based electricity demand response for sustainable manufacturing systems under the production target constraint. Key features of this approach include: (i) the electricity related costs including both consumption and demand are integrated into production system modeling; (ii) energy-efficient and demand-responsive production scheduling problems are formulated and the solution technique is provided; and (iii) the effects of various factors on the near-optimal scheduling solutions are examined. The research outcome is expected to enhance the energy efficiency, electricity demand responsiveness, and cost effectiveness of modern manufacturing systems. - Highlights: • We propose a TOU based demand response approach for manufacturing systems. • Both electricity consumption and demand are integrated into the system modeling. • Energy-efficient and demand-responsive production scheduling problems are formulated. • The meta-heuristic solution technique is provided. • The effects of various factors on the scheduling solutions are examined

  7. Research on applications of ARM-LINUX embedded systems in manufacturing the nuclear equipment

    International Nuclear Information System (INIS)

    Nguyen Van Sy; Phan Luong Tuan; Nguyen Xuan Vinh; Dang Quang Bao

    2016-01-01

    A new microprocessor system that is ARM processor with open source Linux operating system is studied with the objective to apply ARM-Linux embedded systems in manufacturing the nuclear equipment. We use the development board of the company to learn and to build the workflow for an embedded system, then basing on the knowledge we design a motherboard embedded systems interface with the peripherals is buttons, LEDs through GPIO interface and connected with GM counting system via RS232 interface. The results of this study are: i) The procedures for working with embedded systems: process customization, installation embedded operating system and installation process, configure the development tools on the host computer; ii) ARM-Linux motherboard embedded systems interface with the peripherals and GM counting system, indicating the counts from GM counting system on the touch screen. (author)

  8. Self-organization principles result in robust control of flexible manufacturing systems

    DEFF Research Database (Denmark)

    Nature shows us in our daily life how robust, flexible and optimal self-organized modular constructions work in complex physical, chemical and biological systems, which successfully adapt to new and unexpected situations. A promising strategy is therefore to use such self-organization and pattern...... problems with several autonomous robots and several targets are considered as model of flexible manufacturing systems. Each manufacturing target has to be served in a given time interval by one and only one robot and the total working costs have to be minimized (or total winnings maximized). A specifically...... constructed dynamical system approach (coupled selection equations) is used which is based on pattern formation principles and results in fault resistant and robust behaviour. An important feature is that this type of control also guarantees feasiblitiy of the assignment solutions. In previous work...

  9. Conservation of filtering in manufacturing systems with unreliable machines and finished goods buffers

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available This paper addresses the issue of reliable satisfaction of customer demand by unreliable production systems. In the framework of a simple production-storage-customer model, we show that this can be accomplished by using an appropriate level of filtering of production randomness. The filtering is ensured by finished goods buffers (filtering in space and shipping periods (filtering in time. The following question is considered: how are filtering in space and filtering in time interrelated? As an answer, we show that there exists a conservation law: in lean manufacturing systems, the amount of filtering in space multiplied by the amount of filteringin time (both measured in appropriate dimensionless units ispractically constant. Along with providing an insight into the nature of manufacturing systems, this law offers a tool for selecting the smallest, that is, lean, finished goods buffering, which is necessary and sufficient to ensure the desired level ofcustomer demand satisfaction.

  10. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    Directory of Open Access Journals (Sweden)

    Paolo Renna

    2017-03-01

    Full Text Available Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performance measures are compared with a system without any flexibility and no preventive maintenance actions. Different levels of flexibility and preventive maintenance actions are examined under a simulation environment. The simulation results highlight more important factors for the performance measures and the best combination of the factors to improve the performance.

  11. Proposal of a Methodology for Implementing a Service-Oriented Architecture in Distributed Manufacturing Systems

    Science.gov (United States)

    Medina, I.; Garcia-Dominguez, A.; Aguayo, F.; Sevilla, L.; Marcos, M.

    2009-11-01

    As envisioned by Intelligent Manufacturing Systems (IMS), Next Generation Manufacturing Systems (NGMS) will satisfy the needs of an increasingly fast-paced and demanding market by dynamically integrating systems from inside and outside the manufacturing firm itself into a so-called extended enterprise. However, organizing these systems to ensure the maximum flexibility and interoperability with those from other organizations is difficult. Additionally, a defect in the system would have a great impact: it would affect not only its owner, but also its partners. For these reasons, we argue that a service-oriented architecture (SOA) would be a good candidate. It should be designed following a methodology where services play a central role, instead of being an implementation detail. In order for the architecture to be reliable enough as a whole, the methodology will need to help find errors before they arise in a production environment. In this paper we propose using SOA-specific testing techniques, compare some of the existing methodologies and outline several extensions upon one of them to integrate testing techniques.

  12. Management of manufacture and installation of plant pipings by bar code system

    International Nuclear Information System (INIS)

    Suwa, Minoru

    1995-01-01

    As for the piping system of nuclear power plants, the number of parts is very large, and the mill sheet is attached to each part, therefore, it is necessary to manage them individually, and large man power is required. In order to resolve the delay of mechanization in the factory, bar code system was adopted on full scale. At the time of taking parts out from the store, bar code labels are stuck to all piping parts. By this means, all the processes of manufacture and inspection are managed with a computer, and it is useful for labor saving and the prevention of mistaken input. This system is centering around the system of the progress management for piping manufacture, and is operated by being coupled with respective systems of production design, order and inventory, mill sheet management and installation management. The management of production design, manufacture, inspection and installation is explained. There is the problem of sticking bar code labels again as the labels become dirty or parts pass through coating and pickling processes. The direct carving of bar codes on parts by laser marker was tried, and it was successful for stainless steel, but in carbon steel pipes, it was hard to read. It is desirable to develop the bar codes which endure until the end of plant life. (K.I.)

  13. Modification Of The Manufacturing Process Of A Composite Structure- From System Needs To Elementary Tests

    Science.gov (United States)

    Touzard, Jerome; Veilleraud, Frederic; Collias, Michael

    2012-07-01

    The SYLDA5 structure (SYstème de Lancement Double Ariane 5 - Ariane 5 dual launch system) is a lightweight carbon composite structure designed and manufactured by Astrium Space Transportation at Les Mureaux premises. In order to improve the manufacturing process of t he SYLDA5, a proposal was made by SYLDA5 technical team to change the manufacturing process of the composite sandwich parts. The SYLDA5 is however one of the main contributors in the dynamic behaviour of the upper part of Ariane 5 launcher and plays an important role in the qualification of the launcher. The present paper describes the overall qualification logic retained, from System requirements to material tests and to global System qualification, in a classical V- type design cycle. It demonstrates the necessity to take into account System needs when modifying a part of it, especially when the System is qualified with actual characteristics of t he parts that may not be defined in product’s initial requirements.

  14. Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

    Science.gov (United States)

    Hussein, Abdullahi; Cheng, Kai

    2016-10-01

    Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

  15. A novel microgrid demand-side management system for manufacturing facilities

    Science.gov (United States)

    Harper, Terance J.

    Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

  16. Flexible manufacturing systems and their relevance in nuclear fuel fabrication in India

    International Nuclear Information System (INIS)

    Ramakumar, M.S.

    1989-01-01

    Fabrication of nuclear reactor fuel bundle involves several materials and a number of complicated technologies and the process of manufacture has to conform to stringent standards. The Indian Nuclear Programme relies heavily on indigeneous capability of manufacture of nuclear fuels as well as automation of the related facilities. Automation of the existing nuclear facilities is a challenge in view of the characteristic plant environments and process demands as well as the various mechanical and metallurgical steps involved. This paper discusses their requirements and the measures initiated for achieving a high order of automation in Indian nuclear facilities. As a first step, specific automation steps are being incorporated in the existing plants. Such interface automation will enhance productivity and avoid the need for building new totally automated palnts. Flexible manufacturing system as applied here, has a different connotation vis-a-vis conventional manufacturing industry. Robotic devices, even for stacking jobs, have not been used on a large scale the world over. (author). 6 figs

  17. Designing an in-situ ultrasonic nondestructive evaluation system for ultrasonic additive manufacturing

    Science.gov (United States)

    Nadimpalli, Venkata K.; Nagy, Peter B.

    2018-04-01

    Ultrasonic Additive Manufacturing (UAM) is a solid-state layer by layer manufacturing process that utilizes vibration induced plastic deformation to form a metallurgical bond between a thin layer and an existing base structure. Due to the vibration based bonding mechanism, the quality of components at each layer depends on the geometry of the structure. In-situ monitoring during and between UAM manufacturing steps offers the potential for closed-loop control to optimize process parameters and to repair existing defects. One interface that is most prone to delamination is the base/build interface and often UAM component height and quality are limited by failure at the base/build interface. Low manufacturing temperatures and favorable orientation of typical interface defects in UAM make ultrasonic NDE an attractive candidate for online monitoring. Two approaches for in-situ NDE are discussed and the design of the monitoring system optimized so that the quality of UAM components is not affected by the addition of the NDE setup. Preliminary results from in-situ ultrasonic NDE indicate the potential to be utilized for online qualification, closed-loop control and offline certification of UAM components.

  18. The application of virtual reality systems as a support of digital manufacturing and logistics

    Science.gov (United States)

    Golda, G.; Kampa, A.; Paprocka, I.

    2016-08-01

    Modern trends in development of computer aided techniques are heading toward the integration of design competitive products and so-called "digital manufacturing and logistics", supported by computer simulation software. All phases of product lifecycle: starting from design of a new product, through planning and control of manufacturing, assembly, internal logistics and repairs, quality control, distribution to customers and after-sale service, up to its recycling or utilization should be aided and managed by advanced packages of product lifecycle management software. Important problems for providing the efficient flow of materials in supply chain management of whole product lifecycle, using computer simulation will be described on that paper. Authors will pay attention to the processes of acquiring relevant information and correct data, necessary for virtual modeling and computer simulation of integrated manufacturing and logistics systems. The article describes possibilities of use an applications of virtual reality software for modeling and simulation the production and logistics processes in enterprise in different aspects of product lifecycle management. The authors demonstrate effective method of creating computer simulations for digital manufacturing and logistics and show modeled and programmed examples and solutions. They pay attention to development trends and show options of the applications that go beyond enterprise.

  19. A Preliminary Review on Economies of Scale (EOS Towards Industrialized Building System (IBS Manufacturer

    Directory of Open Access Journals (Sweden)

    Tajul Ariffin Syazwana

    2017-01-01

    Full Text Available Industrialized Building System (IBS is a potential technology to improve productivity of construction industry. Controlled production and minimum generation of construction waste are some of the benefits that can be achieved by replacing conventional construction with IBS. In business, IBS is giving a huge opportunity for manufacturer and supplier to expand their business while contributing to construction development. However, bad strategies will put the company in high risk due to higher initial capital for machines and equipment. Therefore, strategic planning for company’s growth, profit maximization, and enhancement of productivity is undeniable to ensure the success of business in construction industry. This preliminary paper is exploring associated factors that affect Economy of Scale (EOS and their relationships in catalyzing the IBS manufacturer especially precast concrete as the scope of study to continue their business in the construction industry. Thus, a framework of EOS is proposed to assist IBS manufacturers to ensure their company’s growth and stability, competitiveness in term of monopoly or an oligopoly, increasing productivity, leading constant returns to scale, and finally increasing the firm’s efficiency. The refined EOS’s conceptual framework is an important turning point to support the development of decision making tools for IBS manufacturer towards their stability and survival in this highly competitive industry.

  20. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System

    Energy Technology Data Exchange (ETDEWEB)

    Babu, Sudarsanam Suresh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Peter, William H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Dehoff, Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility

    2016-05-01

    ) systems development, (iv) material feedstock, (v) process planning, (vi) residual stress & distortion, (vii) post-processing, (viii) qualification of parts, (ix) supply chain and (x) business case. Furthermore, an open innovation network methodology was proposed to accelerate the development and deployment of new large-scale metal additive manufacturing technology with the goal of creating a new generation of high deposition rate equipment, affordable feed stocks, and large metallic components to enhance America’s economic competitiveness.

  1. Factors influencing the alignment of accounting information systems of accepted manufacturing firms in Tehran Stock Exchange

    Directory of Open Access Journals (Sweden)

    Fazel Tamoradi

    2014-03-01

    Full Text Available The primary objective of this paper is to detect factors influencing the alignment of accounting information systems for firms in manufacturing sector listed on Tehran Stock Exchange. The concept of alignment has been investigated for many years, and strategic alignment plays essential role in increasing company performance. This paper investigates different levels of alignment and studies the factors, which influence alignment. More specifically, the work concentrates on the alignment between the requirements for accounting information (AIS requirements and the capacity of accounting systems (AIS capacity to build the information, in the specific context of manufacturing in Iran. The research sample consists of 216 companies over the period 2011-2007. The fit between these two sets was explored based on the moderation method and evidences indicate that AIS alignment in some firms was high. In addition, the relationship between the dependent variable and independent variables through multiple regressions yields a positive relationship between these variables.

  2. Planning and design of a knowledge based system for green manufacturing management

    Science.gov (United States)

    Kamal Mohd Nawawi, Mohd; Mohd Zuki Nik Mohamed, Nik; Shariff Adli Aminuddin, Adam

    2013-12-01

    This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization.

  3. Planning and design of a knowledge based system for green manufacturing management

    International Nuclear Information System (INIS)

    Nawawi, Mohd Kamal Mohd; Mohamed, Nik Mohd Zuki Nik; Aminuddin, Adam Shariff Adli

    2013-01-01

    This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization

  4. Activity-based Costing dan Simulated Annealing untuk Pencarian Rute pada Flexible Manufacturing Systems

    OpenAIRE

    Budhi, Gregorius Satia

    2003-01-01

    In Bahasa Indonesia : Flexible Manufacturing System (FMS) adalah sistem manufaktur yang tersusun dari mesin-mesin Numerical Control (NC) yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin-mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC) digunakan sebagai bobot / weight dalam pencarian ru...

  5. ANALISIS ACTIVITY BASED COST1NG DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    OpenAIRE

    Rialdy, Novien

    2017-01-01

    AbstrakFlexible Manufacturing System (FMS) adalah sistem manufaktur yang tersusun dari mesin -mesin Numerical Control (NC) yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin -mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC) digunakan sebagai bobot / weight dalam pencarian rute operasi pada mesin...

  6. IMPROVEMENT OF MANUFACTURING PERFORMANCE MEASUREMENT SYSTEM AND EVALUATION OF OVERALL RESOURCE EFFECTIVENESS

    OpenAIRE

    Karuppana Gounder Eswaramurthi; Pidugun Venkatachalam Mohanram

    2013-01-01

    In the present highly competitive business environment, well run organizations continually strive to enhance their capabilities to create excellent value for the customers by improving the cost effectiveness of the operations. Significant improvement has taken place in the management of resources associated with manufacturing systems, to reduce the wastage of resources. The Total Productive Maintenance (TPM) concept provides a quantitative metric-Overall Equipment Effectiveness (OEE), for mea...

  7. GUIDELINES FOR RATIONALIZATION OF MANAGEMENT OF PERFORMANCE OF LOGISTICS SYSTEM OF TRANSPORT MACHINE MANUFACTURING ENTERPRISES

    OpenAIRE

    Yulia A. Anankina

    2013-01-01

    The main problems that occurs in a process of movement of material flows in the enterprises of transport machine manufacturing enterprises are stated in the article. Particular attention is paid to the rational use of vehicles on the existing capacity of the material flow of the enterprise. Process of transport service of material flow is concerned step by step. The place of transport in the logistics enterprise system is determined by authors. We give guidelines for rationalization of manage...

  8. Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture

    Science.gov (United States)

    Lassahn, Gordon D.; Lancaster, Gregory D.; Apel, William A.; Thompson, Vicki S.

    2013-01-08

    Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture are described. According to one embodiment, an image portion identification method includes accessing data regarding an image depicting a plurality of biological substrates corresponding to at least one biological sample and indicating presence of at least one biological indicator within the biological sample and, using processing circuitry, automatically identifying a portion of the image depicting one of the biological substrates but not others of the biological substrates.

  9. WEB-BASED ADAPTIVE TESTING SYSTEM (WATS FOR CLASSIFYING STUDENTS ACADEMIC ABILITY

    Directory of Open Access Journals (Sweden)

    Jaemu LEE,

    2012-08-01

    Full Text Available Computer Adaptive Testing (CAT has been highlighted as a promising assessment method to fulfill two testing purposes: estimating student academic ability and classifying student academic level. In this paper, we introduced the Web-based Adaptive Testing System (WATS developed to support a cost effective assessment for classifying students’ ability into different academic levels. Instead of using a traditional paper and pencil test, the WATS is expected to serve as an alternate method to promptly diagnosis and identify underachieving students through Web-based testing. The WATS can also help provide students with appropriate learning contents and necessary academic support in time. In this paper, theoretical background and structure of WATS, item construction process based upon item response theory, and user interfaces of WATS were discussed.

  10. Unified Modeling of Discrete Event and Control Systems Applied in Manufacturing

    Directory of Open Access Journals (Sweden)

    Amanda Arêas de Souza

    2015-05-01

    Full Text Available For the development of both a simulation modeland a control system, it is necessary to build, inadvance, a conceptual model. This is what isusually suggested by the methodologies applied inprojects of this nature. Some conceptual modelingtechniques allow for a better understanding ofthe simulation model, and a clear descriptionof the logic of control systems. Therefore, thispaper aims to present and evaluate conceptuallanguages for unified modeling of models ofdiscrete event simulation and control systemsapplied in manufacturing. The results show thatthe IDEF-SIM language can be applied both insimulation systems and in process control.

  11. Implementation of an RFID-Based Sequencing-Error-Proofing System for Automotive Manufacturing Logistics

    Directory of Open Access Journals (Sweden)

    Yong-Shin Kang

    2018-01-01

    Full Text Available Serialized tracing provides the ability to track and trace the lifecycle of the products and parts. Unlike barcodes, Radio frequency identification (RFID, which is an important building block for internet of things (IoT, does not require a line of sight and has the advantages of recognizing many objects simultaneously and rapidly, and storing more information than barcodes. Therefore, RFID has been used in a variety of application domains such as logistics, distributions, and manufacturing, significantly improving traceability and process efficiency. In this study, we applied RFID to improve the just-in-sequence operation of an automotive inbound logistics process. First, we implemented an RFID-based visibility system for real-time traceability and control of part supply from the production lines of suppliers to the assembly line of a car manufacturer. Second, we developed an RFID-based sequence-error proofing system to avoid accidental line stops due to incorrect part sequencing. The whole system has been successfully installed in a rear-axle inbound logistics process of GM Korea. We achieved a significant amount of cost savings, especially due to the prevention of sequencing errors and part shortages, and the reduction of manual operations. Thorough cost-benefit analysis demonstrates the clear economic feasibility of using RFID technologies for the just-in-sequence inbound logistics in an automobile manufacturing environment.

  12. Ergonomic Optimization of a Manufacturing System Work Cell in a Virtual Environment

    Directory of Open Access Journals (Sweden)

    F. Caputo

    2006-01-01

    Full Text Available The paper deals with the development of a methodology for studying, in a virtual environment, the ergonomics of a work cell in an automotive manufacturing system. The methodology is based on the use of digital human models and virtual reality techniques in order to simulate, in a virtual environment, human performances during the execution of assembly operations. The objective is to define the optimum combination of those geometry features that influence human postures during assembly operation in a work cell. In the demanding global marketplace, ensuring that human factors are comprehensively addressed is becoming an increasingly important aspect of design. Manufacturers have to design work cells that conform to all relevant Health and Safety standards. The proposed methodology can assist the designer to evaluate the performance of workers in a workplace before it has been realized. The paper presents an analysis of a case study proposed by COMAU, a global supplier of industrial automation systems for the automotive manufacturing sector and a global provider of full maintenance services. The study and all the virtual simulations have been carried out in the Virtual Reality Laboratory of the Competence Regional Center for the qualification of transportation systems (CRdC “Trasporti” - www.centrodicompetenzatrasporti.unina. it, which was founded by the Campania region with the aim of delivering advanced services and introducing new technologies into local companies operating in the field of transport. 

  13. Using Additive Manufacturing to Print a CubeSat Propulsion System

    Science.gov (United States)

    Marshall, William M.

    2015-01-01

    CubeSats are increasingly being utilized for missions traditionally ascribed to larger satellites CubeSat unit (1U) defined as 10 cm x 10 cm x 11 cm. Have been built up to 6U sizes. CubeSats are typically built up from commercially available off-the-shelf components, but have limited capabilities. By using additive manufacturing, mission specific capabilities (such as propulsion), can be built into a system. This effort is part of STMD Small Satellite program Printing the Complete CubeSat. Interest in propulsion concepts for CubeSats is rapidly gaining interest-Numerous concepts exist for CubeSat scale propulsion concepts. The focus of this effort is how to incorporate into structure using additive manufacturing. End-use of propulsion system dictates which type of system to develop-Pulse-mode RCS would require different system than a delta-V orbital maneuvering system. Team chose an RCS system based on available propulsion systems and feasibility of printing using a materials extrusion process. Initially investigated a cold-gas propulsion system for RCS applications-Materials extrusion process did not permit adequate sealing of part to make this a functional approach.

  14. Implementation of Lean System on Erbium Doped Fibre Amplifier Manufacturing Process to Reduce Production Time

    Science.gov (United States)

    Maneechote, T.; Luangpaiboon, P.

    2010-10-01

    A manufacturing process of erbium doped fibre amplifiers is complicated. It needs to meet the customers' requirements under a present economic status that products need to be shipped to customers as soon as possible after purchasing orders. This research aims to study and improve processes and production lines of erbium doped fibre amplifiers using lean manufacturing systems via an application of computer simulation. Three scenarios of lean tooled box systems are selected via the expert system. Firstly, the production schedule based on shipment date is combined with a first in first out control system. The second scenario focuses on a designed flow process plant layout. Finally, the previous flow process plant layout combines with production schedule based on shipment date including the first in first out control systems. The computer simulation with the limited data via an expected value is used to observe the performance of all scenarios. The most preferable resulted lean tooled box systems from a computer simulation are selected to implement in the real process of a production of erbium doped fibre amplifiers. A comparison is carried out to determine the actual performance measures via an analysis of variance of the response or the production time per unit achieved in each scenario. The goodness of an adequacy of the linear statistical model via experimental errors or residuals is also performed to check the normality, constant variance and independence of the residuals. The results show that a hybrid scenario of lean manufacturing system with the first in first out control and flow process plant lay out statistically leads to better performance in terms of the mean and variance of production times.

  15. EDUCATION SYSTEMS AND ACADEMIC SATISFACTION: A Study on Rural and Urban Students of Traditional Vs Open Education System in India

    Directory of Open Access Journals (Sweden)

    Shashi SINGH,

    2012-07-01

    Full Text Available A satisfaction and dissatisfaction level within an individual influences the motivation level and his/her performance throughout the life. When an individual is satisfied with his/her work, he/she gets pleasure and feels motivated. Obtaining satisfaction from their education system is very important for students as this will lead to better learning possibilities. This paper aims to compare the level of academic satisfaction among the students of Traditional Education System and Open Education System. This paper also investigates academic satisfaction of urban and rural based students and comparing them over traditional (Urban: 110; Rural: 90, and open (Urban: 80; Rural: 71 education system. Statistical tests demonstrate that there is significant difference in the level of academic satisfaction among the students of Open Education System (OES and Traditional Education System (TES.

  16. Space system production cost benefits from contemporary philosophies in management and manufacturing

    Science.gov (United States)

    Rosmait, Russell L.

    1991-01-01

    The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

  17. Designing a mathematical model for integrating dynamic cellular manufacturing into supply chain system

    Science.gov (United States)

    Aalaei, Amin; Davoudpour, Hamid

    2012-11-01

    This article presents designing a new mathematical model for integrating dynamic cellular manufacturing into supply chain system with an extensive coverage of important manufacturing features consideration of multiple plants location, multi-markets allocation, multi-period planning horizons with demand and part mix variation, machine capacity, and the main constraints are demand of markets satisfaction in each period, machine availability, machine time-capacity, worker assignment, available time of worker, production volume for each plant and the amounts allocated to each market. The aim of the proposed model is to minimize holding and outsourcing costs, inter-cell material handling cost, external transportation cost, procurement & maintenance and overhead cost of machines, setup cost, reconfiguration cost of machines installation and removal, hiring, firing and salary worker costs. Aimed to prove the potential benefits of such a design, presented an example is shown using a proposed model.

  18. Financial problems facing the manufacturers of small wind energy conversion systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bolle, T G

    1979-11-01

    The financial barriers faced by the manufacturers of small wind energy conversion systems (SWECS) are assessed and found to be similar to those faced by other start up businesses. However, these problems are found to be aggravated by the high expectations for accelerated SWECS industry growth in the face of moderate government support and lack of investment capital. The underlying conditions of limited SWECS entrepreneur business experience, the highly competitive venture capital market, the inability of existing financial institutions to aid infant busineses and public unawareness of SWECS are reviewed. Specific manufacturer-oriented recommendations and federal, state and regulatory policy-oriented recommendations are made. In addition, the dynamics of the SWECS commercialization process are assessed and the variety of financial institutions playing a role in this process is detailed. Issues related to inflation, tax policy, regulation and federal R and D procurement policies are analyzed.

  19. Global R&D through the Intelligent Manufacturing Systems (IMS) program

    Science.gov (United States)

    Huray, Paul G.

    1997-01-01

    The industry-led, international intelligent manufacturing systems (IMS) program provides a special vehicle for joint research and development between government, industry and academia in the United States, Canada, Japan, Australia, and Europe. Since its beginning in 1989, the IMS program has progressed through a feasibility phase which demonstrated that international legal barriers, trade issues, and intellectual property problems could be overcome. The program is constructed to provide higher quality design, customized products, shorter delivery cycles and lower costs. Interactions between partner companies have led to new business opportunities for mutual profit and some claim to have learned strategic information about their international competitors. The IMS program is growing through the participation of hundreds of corporate and university partners who share responsibilities in specific projects and jointly reap benefits for their manufacturing products and processes. The logic for choosing or not choosing the IMS mechanisms will be discussed and R and D projects will be identified.

  20. Automation Architecture based on Cyber Physical Systems for Flexible Manufacturing within Oil&Gas Industry

    Directory of Open Access Journals (Sweden)

    Marcelo V García

    2018-03-01

    Full Text Available It is clear that in the next few years most of the technologies involved in the so-called Industry 4.0 will have a deep impact on manufacturing companies, including those related to Oil & Gas exploration and production. Low cost automation promotes reference architectures and development approaches aiming at increasing the flexibility and efficiency of production operations in industrial plants. In this sense, OPC UA, in addition to allowing companies to join the Industry 4.0 initiative, provides local and remote access to plant information, enabling a recognized mechanism for both, horizontal and vertical integration in a reliable, safe and efficient way. The contribution of this article is an open architecture for vertical integration based on cyber-physical production systems, configured under IEC 61499 and using OPC UA, suitable to achieve flexible manufacturing within Oil & Gas industry.

  1. A Pilot-Scale System for Carbon Molecular Sieve Hollow Fiber Membrane Manufacturing

    KAUST Repository

    Karvan, O.

    2012-12-21

    Carbon molecular sieve (CMS) membranes offer advantages over traditional polymeric membrane materials, but scale-up of manufacturing systems has not received much attention. In the recent decade, there has been a dramatic increase in fundamental research on these materials with a variety of applications being studied. The results from a pilot-scale CMS production system are presented. This system was designed based on extensive laboratory research, and hollow fiber membranes produced in this system show similar performance compared to membranes produced using a smaller bench-scale system. After optimizing the system design, a 93% recovery of the precursor fibers for use in membrane module preparation were obtained. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. The Case of a Newly Implemented Modern Management Accounting System in a Multinational Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Daniel Watts

    2014-06-01

    Full Text Available Contemporary management accounting techniques (such as TQM, BSC, JIT are widely lauded by academia but the proposed relevance to business has not necessarily the view held by industry (e.g. Burns & Vaivio, 2001; Chenhall & Langfield-Smith, 1998; Innes et al., 2000. The purpose of this article is to investigate the acquisition by a modern multi-national firm of a major IT-based management accounting program to assess the relevance and usefulness of its functionality by identifying the type(s of systems that are utilised and the rationale for upgrading or modifying its system(s. This study relies on a single case based on two in-depth semi structured interviews with accounting and finance professionals in a multi-national manufacturing company that recently implemented a modern management accounting system. The findings indicate that despite demonstrating some relevance of the management accounting information, the manufacturer deactivated components of the system that were deemed irrelevant at particular levels of the organisation. This paper provides evidence about the non-reliance on management accounting information in a multinational company operating in Australia. The findings in the study imply that relevance is linked to implementation, planning and training will help managers to better prepare themselves in setting up contemporary management accounting systems.

  3. Implementation of a configurable laboratory information management system for use in cellular process development and manufacturing.

    Science.gov (United States)

    Russom, Diana; Ahmed, Amira; Gonzalez, Nancy; Alvarnas, Joseph; DiGiusto, David

    2012-01-01

    Regulatory requirements for the manufacturing of cell products for clinical investigation require a significant level of record-keeping, starting early in process development and continuing through to the execution and requisite follow-up of patients on clinical trials. Central to record-keeping is the management of documentation related to patients, raw materials, processes, assays and facilities. To support these requirements, we evaluated several laboratory information management systems (LIMS), including their cost, flexibility, regulatory compliance, ongoing programming requirements and ability to integrate with laboratory equipment. After selecting a system, we performed a pilot study to develop a user-configurable LIMS for our laboratory in support of our pre-clinical and clinical cell-production activities. We report here on the design and utilization of this system to manage accrual with a healthy blood-donor protocol, as well as manufacturing operations for the production of a master cell bank and several patient-specific stem cell products. The system was used successfully to manage blood donor eligibility, recruiting, appointments, billing and serology, and to provide annual accrual reports. Quality management reporting features of the system were used to capture, report and investigate process and equipment deviations that occurred during the production of a master cell bank and patient products. Overall the system has served to support the compliance requirements of process development and phase I/II clinical trial activities for our laboratory and can be easily modified to meet the needs of similar laboratories.

  4. A modelling approach for improved implementation of information technology in manufacturing systems

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Langer, Gilad; Kirkby, Lars Phillip

    2000-01-01

    concept into practice. The paper demonstrates the use of the approach in a practical case, which involves modelling of the shop floor activities and control system at the aluminium parts production at a Danish manufacturer of state-of-the-art audio-video equipment and telephones.......The paper presents a modelling approach, which is based on the multiple view perspective of Soft Systems Methodology and an encapsulation of these perspectives into an object orientated model. The approach provides a structured procedure for putting theoretical abstractions of a new production...

  5. External injection systems applied in modern cyclotrons designed and manufactured in NIIEFA

    International Nuclear Information System (INIS)

    Bogdanov, P.V.; Vasilchenko, I.N.; Veresov, O.L.; Gavrish, Yu.N.; Grigorenko, S.V.; Zuev, Yu.V.; Kozienko, M.T.; Mudrolyubov, V.G.; Strokach, A.P.; Tsygankov, S.S.

    2012-01-01

    The main parameters and design features of the external injection systems applied in modern cyclotrons designed and manufactured in NIIEFA and intended for production of radionuclides for medicine are presented. The use of these external injection systems instead of a traditional internal source allows the current of the accelerated beam to be significantly increased and the in-leakage of the working gas to the acceleration chamber to be reduced, which results in reduced beam losses in the process of acceleration and lower equipment activation.

  6. Research on time synchronization scheme of MES systems in manufacturing enterprise

    Science.gov (United States)

    Yuan, Yuan; Wu, Kun; Sui, Changhao; Gu, Jin

    2018-04-01

    With the popularity of information and automatic production in the manufacturing enterprise, data interaction between business systems is more and more frequent. Therefore, the accuracy of time is getting higher and higher. However, the NTP network time synchronization methods lack the corresponding redundancy and monitoring mechanisms. When failure occurs, it can only make up operations after the event, which has a great effect on production data and systems interaction. Based on this, the paper proposes a RHCS-based NTP server architecture, automatically detect NTP status and failover by script.

  7. [Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

    Science.gov (United States)

    Yu, Q

    2018-04-09

    Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

  8. Yalın Üretim Ortamına Uygun Maliyet Sistemi Seçimi(Selection of Costing System Appropriate for Lean Manufacturing Environment

    Directory of Open Access Journals (Sweden)

    Funda ÖZÇELİK

    2013-01-01

    Full Text Available To be successful in global competition, the number of firms adopted lean manufacturing systems are increasing every day. Traditional cost management systems is insufficient to produce the information needed for businesses adopting lean manufacturing system. Value stream costing system, appropriate for lean manufacturing enterprises’s value stream organization, better serves the purpose of lean enterprises. In this study value stream costing introduced and selection of costing system for lean manufacturing environments will be done.

  9. Satisfaction, Motivation, and Retention in Academic Faculty Incentive Compensation Systems: A CERA Survey.

    Science.gov (United States)

    Willis, Deanna; Williams, Jane; Gebke, Kevin; Bergus, George

    2018-02-01

    The use of incentive compensation in academic family medicine has been a topic of interest for many years, yet little is known about the impact of these systems on individual faculty members. Better understanding is needed about the relationship of incentive compensation systems (ICSs) to ICS satisfaction, motivation, and retention among academic family medicine faculty. The Council of Academic Family Medicine (CAFM) Educational Research Alliance (CERA) conducted a nationwide survey of its members in 2013. This study reports the results of the incentive compensation question subset of the larger omnibus survey. The overall response rate was 53%. The majority (70% [360/511]) of academic faculty reported that they are eligible for some type of incentive compensation. The faculty reported moderate satisfaction, with only 38% being satisfied or highly satisfied with their ICS. Overall mean motivation and intent to remain in their current position were similar. The percentage of total income available as an incentive explained less than 10% of the variance of those outcomes. Faculty perceptions of appropriateness of the measures, understanding of the measurement and reward systems, and perception of due process are all related to satisfaction with the ICS, motivation, and retention. ICSs are common in academic family medicine, yet most faculty do not find them to motivate their choice of activities or promote staying in their current position. Design and implementation are both important in promoting faculty satisfaction with the ICS, motivation, and retention.

  10. Design and Manufacture an Ultrasonic Dispersion System with Automatic Frequency Adjusting Property

    Directory of Open Access Journals (Sweden)

    Herlina ABDUL RAHIM

    2011-03-01

    Full Text Available This paper a novel ultrasonic dispersion system for the cleaning application or dispersing of particles which are mixed in liquid has been proposed. The frequency band of designed system is 30 kHz so that the frequency of ultrasonic wave sweeps from 30 kHz to 60 kHz with 100 Hz steps. One of the superiority of manufactured system in compare with the other similar systems which are available in markets is that this system can transfer the maximum and optimum energy of ultrasonic wave inside the liquid tank with the high efficiency in the whole of the usage time of the system. The used ultrasonic transducers in this system as the generator of ultrasonic wave is the type of air coupled ceramic ultrasonic piezoelectric with the nominal maximum power 50 Watt. The frequency characteristic of applied piezoelectric is that it produces the maximum amplitude of ultrasonic wave on the resonance frequency, so this system is designed to work on resonance frequency of piezoelectric, continuously. This is done by the use of control system which is consisted of two major parts, sensing part and controlling part. The manufactured ultrasonic dispersion system is consisted of 9 piezoelectrics so that it can produce 450 watt ultrasonic energy, totally. The main purpose of this project is to produce a safety system especially for fatigue car driver so as to prevent from accidents. The statistic on road fatality shows that human error constitute of 64.84 % road accidents fatality and 17.4 % due to technical factors. These systems encompassed the approach of hand pressure applied on the steering wheel. The steering will be installed with pressure sensors. At the same time these sensors can be used to measure gripping force while driving.

  11. Automatic exposure control in computed tomography - an evaluation of systems from different manufacturers

    Energy Technology Data Exchange (ETDEWEB)

    Soederberg, Marcus; Gunnarsson, Mikael (Dept. of Medical Radiation Physics, Skaane Univ. Hospital, Malmoe (Sweden)), e-mail: marcus.soderberg@med.lu.se

    2010-07-15

    Background: Today, practically all computed tomography (CT) systems are delivered with automatic exposure control (AEC) systems operating with tube current modulation in three dimensions. Each of these systems has different specifications and operates somewhat differently. Purpose: To evaluate AEC systems from four different CT scanner manufacturers: General Electric (GE), Philips, Siemens, and Toshiba, considering their potential for reducing radiation exposure to the patient while maintaining adequate image quality. Material and Methods: The dynamics (adaptation along the longitudinal axis) of tube current modulation of each AEC system were investigated by scanning an anthropomorphic chest phantom using both 16- and 64-slice CT scanners from each manufacturer with the AEC systems activated and inactivated. The radiation dose was estimated using the parameters in the DICOM image information and image quality was evaluated based on image noise (standard deviation of CT numbers) calculated in 0.5 cm2 circular regions of interest situated throughout the spine region of the chest phantom. Results: We found that tube current modulation dynamics were similar among the different AEC systems, especially between GE and Toshiba systems and between Philips and Siemens systems. Furthermore, the magnitude of the reduction in the exposure dose was considerable, in the range of 35-60%. However, in general the image noise increased when the AEC systems were used, especially in regions where the tube current was greatly decreased, such as the lung region. However, the variation in image noise among images obtained along the scanning direction was lower when using the AEC systems compared with fixed mAs. Conclusion: The AEC systems available in modern CT scanners can contribute to a significant reduction in radiation exposure to the patient and the image noise becomes more uniform within any given scan.

  12. Optimizing production and imperfect preventive maintenance planning's integration in failure-prone manufacturing systems

    International Nuclear Information System (INIS)

    Aghezzaf, El-Houssaine; Khatab, Abdelhakim; Tam, Phuoc Le

    2016-01-01

    This paper investigates the issue of integrating production and maintenance planning in a failure-prone manufacturing system. It is assumed that the system's operating state is stochastically predictable, in terms of its operating age, and that it can accordingly be preventively maintained during preplanned periods. Preventive maintenance is assumed to be imperfect, that is when performed, it brings the manufacturing system to an operating state that lies between ‘as bad as old’ and ‘as good as new’. Only an overhauling of the system brings it to a ‘as good as new’ operating state again. A practical integrated production and preventive maintenance planning model, that takes into account the system's manufacturing capacity and its operational reliability state, is developed. The model is naturally formulated as a mixed-integer non-linear optimization problem, for which an extended mixed-integer linear reformulation is proposed. This reformulation, while it solves the proposed integrated planning problem to optimality, remains quite demanding in terms of computational time. A fix-and-optimize procedure, that takes advantage of some properties of the original model, is then proposed. The reformulation and the fix-and-optimize procedure are tested on some test instances adapted from those available in the literature. The results show that the proposed fix-and-optimize procedure performs quite well and opens new research direction for future improvements. - Highlights: • Integration of production planning and imperfect preventive maintenance is explored. • Imperfect maintenance is modeled using a fitting age reduction hybrid hazard rate. • A practical approximate optimization model for this integration is proposed. • The resulting naturally MINL optimization model is reformulated and solved as a MILP. • An effective fix-and-optimize procedure is proposed for large instances of this MILP.

  13. Establishment of quality system program for the manufacture of nuclear grade steels

    International Nuclear Information System (INIS)

    Saito, Toru

    1978-01-01

    Recently, the pressure vessels employed in the fields of nuclear power generation, petroleum refining, and chemical industry tend to be large size and high performance, therefore thick steel plates and forgings of high quality are demanded, and the establishment and maintenance of strict quality assurance system for material production are required. In Mizushima Works, Kawasaki Steel Corp., the installations for large forgings and thick plates were constructed from 1969 to 1976, and the researches on the development of production techniques were forwarded in parallel. A Quality System Certificate (Material) has been granted to Mizushima Works on March 11, 1977, by the American Society of Mechanical Engineers for the manufacture of steel plates and forgings of nuclear grade. The quality system manual as the basis of quality assurance activities, the organization for quality assurance, its responsibility and authority, the discrimination of materials, the control of manufacturing processes, the qualification of workers in charge of nondestructive test, welding, heat treatment and others, the management of tests and inspections, the management of products with faults and repairing measures, and internal supervisory system are explained. The wide use of computers is novel in the field of quality system program. (Kako, I.)

  14. Application of contemporary integrated manufacture systems to nuclear power plants management

    International Nuclear Information System (INIS)

    Zhou Gang; Wang Lushuai; Tang Yaoyang

    2005-01-01

    In order to improve the safety, economy and reliability of the operation of a nuclear power plant (NPP), a novel integrated management method is proposed based on the 'integration' concept of the computer and contemporary integrated manufacture systems (CIMS). The design of integrated management system for NPP is studied. In the design of this system, information integration method based on the database and product data management (PDM) technology is adopted. In order to design and integrated management system satisfying the needs of NPP management, all activities of NPP are divided into different categories according to its characteristics. There are subsystems under the general management system to conduct the management work of different categories. All subsystems are interrelated in the environment of CIMS, but relatively independent. The application of CIMS to NPP provides a new way for scientific management of NPP, and makes the best of human, material and information resources. (authors)

  15. Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chick, Lawrence A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gotthold, David W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Whyatt, Greg A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-09-30

    Solid oxide fuel cell (SOFC) power systems can be designed to produce electricity from fossil fuels at extremely high net efficiencies, approaching 70%. However, in order to penetrate commercial markets to an extent that significantly impacts world fuel consumption, their cost will need to be competitive with alternative generating systems, such as gas turbines. This report discusses a cost model developed at PNNL to estimate the manufacturing cost of SOFC power systems sized for ground-based distributed generation. The power system design was developed at PNNL in a study on the feasibility of using SOFC power systems on more electric aircraft to replace the main engine-mounted electrical generators [Whyatt and Chick, 2012]. We chose to study that design because the projected efficiency was high (70%) and the generating capacity was suitable for ground-based distributed generation (270 kW).

  16. Manufacture and testing of the CTB&SBB thermal shield for the ITER magnet feeder system

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Kun; Liu, Chen; Song, Yuntao; Feng, Hansheng; Ding, Kaizhong, E-mail: kzding@ipp.ac.cn; Wang, Tanbin; Ji, Hui

    2015-10-15

    The system of International Thermonuclear Experimental Reactor (ITER) feeders is responsible for the power, helium cooling, and instrumentation of the magnets of the coil terminal box and S-bend box (CTB&SBB) thermal shield outside the cryostat. An 80-K rectangular Al thermal shield is hung inside the CTB&SBB to reduce the thermal radiation heat loads of 4.5-K helium. The American Society of Interventional Pain Physicians (ASIPP) will supply all the 31 sets of feeders for ITER. A manufactured prototype of CTB&SBB thermal shield is first quality-tested before the commencement of the series production. First, a detailed configuration of the rectangular Al thermal shield is presented in this article. The paper also presents more information on the manufacturing process of the thermal shield, especially the welding process, the procedure for ensuring good weld quality, and the use of a specially designed tool to ensure <5-mm deformation on such a 7.3-m-long thermal shield during welding. In addition, the cold test and results, including the cooling process with 13-bar and 17.5-g/s 80-K He gas, and the temperature distribution on different panels of the thermal shield are presented. The whole process of manufacture and testing lays a good foundation for the series production of the thermal shield.

  17. Magnetostrictive performance of additively manufactured CoFe rods using the LENSTM system

    Science.gov (United States)

    Jones, Nicholas J.; Yoo, Jin-Hyeong; Ott, Ryan T.; Lambert, Paul K.; Petculescu, Gabriela; Simsek, Emrah; Schlagel, Deborah; Lograsso, Thomas A.

    2018-05-01

    Magnetostrictive materials exhibit a strain in the presence of a variable magnetic field. While they normally require large, highly oriented crystallographic grains for high strain values, metal additive manufacturing (3D printing) may be able to produce highly textured polycrystalline rods, with properties comparable to those manufactured using the more demanding free standing zone melting (FSZM) technique. Rods of Co75.8Fe24.2 and Co63.7Fe36.3 have been fabricated using the Laser engineered net shaping (LENSTM) system to evaluate the performance of additively manufactured magnetic and magnetostrictive materials. The 76% Co sample showed an average magnetostriction (λ) of 86 ppm at a stress of 124 MPa; in contrast, the 64% Co sample showed only 27 ppm at the same stress. For direct comparison, a Co67Fe33 single crystal disk, also measured as part of this study, exhibited a magnetostriction value of 131 and 91 microstrain in the [100] and [111] directions, respectively, with a calculated polycrystalline value (λs) of 107 microstrain. Electron back scattered diffraction (EBSD) has been used to qualitatively link the performance with crystallographic orientation and phase information, showing only the BCC phase in the 76% Co sample, but three different phases (BCC, FCC, and HCP) in the 64% Co sample.

  18. Manufacturing of metallic porous structures to be used in capillary pumping systems

    Directory of Open Access Journals (Sweden)

    Eduardo Gonçalves Reimbrecht

    2003-12-01

    Full Text Available Sintered metallic porous structures have an application as capillary structures in two-phase heat transfer loops. In this work the manufacturing procedure of tubular porous structures for capillary pump application is discussed. The application of porous structures on capillary pumping systems requires porosity higher than 40% and pore size diameter lower than 20 µm. Carbonyl nickel powder with particle diameter between 3 and 7 µm and stainless steel AISI316L powder with particle diameter between 1 and 22 µm were used as raw material. Sintering under hydrogen atmosphere was performed both in a resistive furnace and in a plasma reactor. Temperature and time were the modified parameters to obtain suitable porosity and roundness on the samples. The porosity was measured using the Arquimedes Principle (MPIF-42, the roundness was evaluated using a simplified measurement technique of the sample diameter and the pore size distribution was determined by image analysis techniques. Images obtained by Scanning Electronic Microscopy were employed on the image analysis. The sintering parameters selected to manufacture nickel samples were 700 °C and 30 min resulting in a porosity of about 44%. The sintering parameters selected to manufacture stainless steel samples were 1000 °C and 30 min resulting in a porosity of about 40%.

  19. Magnetostrictive performance of additively manufactured CoFe rods using the LENSTM system

    Directory of Open Access Journals (Sweden)

    Nicholas J. Jones

    2018-05-01

    Full Text Available Magnetostrictive materials exhibit a strain in the presence of a variable magnetic field. While they normally require large, highly oriented crystallographic grains for high strain values, metal additive manufacturing (3D printing may be able to produce highly textured polycrystalline rods, with properties comparable to those manufactured using the more demanding free standing zone melting (FSZM technique. Rods of Co75.8Fe24.2 and Co63.7Fe36.3 have been fabricated using the Laser engineered net shaping (LENSTM system to evaluate the performance of additively manufactured magnetic and magnetostrictive materials. The 76% Co sample showed an average magnetostriction (λ of 86 ppm at a stress of 124 MPa; in contrast, the 64% Co sample showed only 27 ppm at the same stress. For direct comparison, a Co67Fe33 single crystal disk, also measured as part of this study, exhibited a magnetostriction value of 131 and 91 microstrain in the [100] and [111] directions, respectively, with a calculated polycrystalline value (λs of 107 microstrain. Electron back scattered diffraction (EBSD has been used to qualitatively link the performance with crystallographic orientation and phase information, showing only the BCC phase in the 76% Co sample, but three different phases (BCC, FCC, and HCP in the 64% Co sample.

  20. Overall Environmental Equipment Effectiveness as a Metric of a Lean and Green Manufacturing System

    Directory of Open Access Journals (Sweden)

    Rosario Domingo

    2015-07-01

    Full Text Available This paper presents a new metric for describing the sustainability improvements achieved, relative to the company’s initial situation, after implementing a lean and green manufacturing system. The final value of this metric is identified as the Overall Environmental Equipment Effectiveness (OEEE, which is used to analyze the evolution between two identified states of the Overall Equipment Effectiveness (OEE and the sustainability together, and references, globally and individually, the production steps. The OEE is a known measure of equipment utilization, which includes the availability, quality and performance of each production step, In addition to these factors, the OEEE incorporates the concept of sustainability based on the calculated environmental impact of the complete product life cycle. Action research based on the different manufacturing processes of a tube fabrication company is conducted to assess the potential impact of this new indicator. The case study demonstrates the compatibility between green and lean manufacturing, using a common metric. The OEEE allows sustainability to be integrated into business decisions, and compares the environmental impact of two states, by identifying the improvements undertaken within the company’s processes.

  1. Discrete Event Simulation Method as a Tool for Improvement of Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Adrian Kampa

    2017-02-01

    Full Text Available The problem of production flow in manufacturing systems is analyzed. The machines can be operated by workers or by robots, since breakdowns and human factors destabilize the production processes that robots are preferred to perform. The problem is how to determine the real difference in work efficiency between humans and robots. We present an analysis of the production efficiency and reliability of the press shop lines operated by human operators or industrial robots. This is a problem from the field of Operations Research for which the Discrete Event Simulation (DES method has been used. Three models have been developed, including the manufacturing line before and after robotization, taking into account stochastic parameters of availability and reliability of the machines, operators, and robots. We apply the OEE (Overall Equipment Effectiveness indicator to present how the availability, reliability, and quality parameters influence the performance of the workstations, especially in the short run and in the long run. In addition, the stability of the simulation model was analyzed. This approach enables a better representation of real manufacturing processes.

  2. America's Next Great Ship: Space Launch System Core Stage Transitioning from Design to Manufacturing

    Science.gov (United States)

    Birkenstock, Benjamin; Kauer, Roy

    2014-01-01

    The Space Launch System (SLS) Program is essential to achieving the Nation's and NASA's goal of human exploration and scientific investigation of the solar system. As a multi-element program with emphasis on safety, affordability, and sustainability, SLS is becoming America's next great ship of exploration. The SLS Core Stage includes avionics, main propulsion system, pressure vessels, thrust vector control, and structures. Boeing manufactures and assembles the SLS core stage at the Michoud Assembly Facility (MAF) in New Orleans, LA, a historical production center for Saturn V and Space Shuttle programs. As the transition from design to manufacturing progresses, the importance of a well-executed manufacturing, assembly, and operation (MA&O) plan is crucial to meeting performance objectives. Boeing employs classic techniques such as critical path analysis and facility requirements definition as well as innovative approaches such as Constraint Based Scheduling (CBS) and Cirtical Chain Project Management (CCPM) theory to provide a comprehensive suite of project management tools to manage the health of the baseline plan on both a macro (overall project) and micro level (factory areas). These tools coordinate data from multiple business systems and provide a robust network to support Material & Capacity Requirements Planning (MRP/CRP) and priorities. Coupled with these tools and a highly skilled workforce, Boeing is orchestrating the parallel buildup of five major sub assemblies throughout the factory. Boeing and NASA are transforming MAF to host state of the art processes, equipment and tooling, the most prominent of which is the Vertical Assembly Center (VAC), the largest weld tool in the world. In concert, a global supply chain is delivering a range of structural elements and component parts necessary to enable an on-time delivery of the integrated Core Stage. SLS is on plan to launch humanity into the next phase of space exploration.

  3. A Mechanized Decision Support System for Academic Scheduling.

    Science.gov (United States)

    1986-03-01

    an operational system called software. The first step in the development phase is Design . Designers destribute software control by factoring the Data...SUBJECT TERMS (Continue on reverse if necessary and identify by block number) ELD GROUP SUB-GROUP Scheduling, Decision Support System , Software Design ...scheduling system . It will also examine software - design techniques to identify the most appropriate method- ology for this problem. " - Chapter 3 will

  4. Expert Systems in Medicine: Academic Illusion or Real Power?

    Directory of Open Access Journals (Sweden)

    KS Metaxiotis

    2000-02-01

    Full Text Available From the very earliest moments in the modern history of the computer, scientists have dreamed of creating advanced systems that would simulate human thinking and reasoning. Of all the modern technological quests, research to create artificially intelligent computer systems has been one of the most ambitious and fascinating. Although attempts were made more than thirty years ago to develop and apply such systems to the medical sciences, the field languished for decades. In this context, this paper aims to share thoughts about and assessments of the important role of expert systems in medicine and address their future as well as the trends that are foreseen in this area.

  5. The paradoxical injunctions of the French academic communication system

    Directory of Open Access Journals (Sweden)

    Anne-Hélène LE CORNEC UBERTINI

    2014-12-01

    Full Text Available The current evils of the scholars and researchers are the consequence of a dysfunctional communication system. The incompatibility between the spirit of the laws and its mode of application illustrate a worrying retreat of the democratic principles. The university is the mirror of the political system.

  6. Evaluating Nonclinical Performance of the Academic Pathologist: A Comprehensive, Scalable, and Flexible System for Leadership Use.

    Science.gov (United States)

    Wiles, Austin Blackburn; Idowu, Michael O; Clevenger, Charles V; Powers, Celeste N

    2018-01-01

    Academic pathologists perform clinical duties, as well as valuable nonclinical activities. Nonclinical activities may consist of research, teaching, and administrative management among many other important tasks. While clinical duties have many clear metrics to measure productivity, like the relative value units of Medicare reimbursement, nonclinical performance is often difficult to measure. Despite the difficulty of evaluating nonclinical activities, nonclinical productivity is used to determine promotion, funding, and inform professional evaluations of performance. In order to better evaluate the important nonclinical performance of academic pathologists, we present an evaluation system for leadership use. This system uses a Microsoft Excel workbook to provide academic pathologist respondents and reviewing leadership a transparent, easy-to-complete system that is both flexible and scalable. This system provides real-time feedback to academic pathologist respondents and a clear executive summary that allows for focused guidance of the respondent. This system may be adapted to fit practices of varying size, measure performance differently based on years of experience, and can work with many different institutional values.

  7. Low cost method for manufacturing a data acquisition system with USB connectivity

    Science.gov (United States)

    Niculescu, V.; Dobre, R. A.; Popovici, E.

    2016-06-01

    In the process of designing and manufacturing an electronic system the digital oscilloscope plays an essential role but it also represents one of the most expensive equipment present on the typical workbench. In order to make electronic design more accessible to students and hobbyists, an affordable data acquisition system was imagined. The paper extensively presents the development and testing of a low cost, medium speed, data acquisition system which can be used in a wide range of electronic measurement and debugging applications, assuring also great portability due to the small physical dimensions. Each hardware functional block and is thoroughly described, highlighting the challenges that occurred as well as the solutions to overcome them. The entire system was successfully manufactured using high quality components to assure increased reliability, and high frequency PCB materials and techniques were preferred. The measured values determined based on test signals were compared to the ones obtained using a digital oscilloscope available on the market and differences less than 1% were observed.

  8. Relationship Between the Perception Curriculum Credit Semester System (Sks) with Academic Achievement Motivation in Students of Sman 78 Jakarta

    OpenAIRE

    Nurhidayah, Fajriati; Widodo, Prasetyo Budi; Desiningrum, Dinie Ratri

    2012-01-01

    School education has a major role in improving the quality of eduvation ,00aitems through the students academic achievement motivation. Students academic achievement motivation can be seen by the student perception of the curriculum semester credit system is applied in schools. This research was conducted to determine the relationship between perceptions of curriculum semester credit system with academic achievement motivation in students of SMAN 78 Jakarta. The population was 324 students w...

  9. Enhanced clinical-scale manufacturing of TCR transduced T-cells using closed culture system modules.

    Science.gov (United States)

    Jin, Jianjian; Gkitsas, Nikolaos; Fellowes, Vicki S; Ren, Jiaqiang; Feldman, Steven A; Hinrichs, Christian S; Stroncek, David F; Highfill, Steven L

    2018-01-24

    Genetic engineering of T-cells to express specific T cell receptors (TCR) has emerged as a novel strategy to treat various malignancies. More widespread utilization of these types of therapies has been somewhat constrained by the lack of closed culture processes capable of expanding sufficient numbers of T-cells for clinical application. Here, we evaluate a process for robust clinical grade manufacturing of TCR gene engineered T-cells. TCRs that target human papillomavirus E6 and E7 were independently tested. A 21 day process was divided into a transduction phase (7 days) and a rapid expansion phase (14 days). This process was evaluated using two healthy donor samples and four samples obtained from patients with epithelial cancers. The process resulted in ~ 2000-fold increase in viable nucleated cells and high transduction efficiencies (64-92%). At the end of culture, functional assays demonstrated that these cells were potent and specific in their ability to kill tumor cells bearing target and secrete large quantities of interferon and tumor necrosis factor. Both phases of culture were contained within closed or semi-closed modules, which include automated density gradient separation and cell culture bags for the first phase and closed GREX culture devices and wash/concentrate systems for the second phase. Large-scale manufacturing using modular systems and semi-automated devices resulted in highly functional clinical-grade TCR transduced T-cells. This process is now in use in actively accruing clinical trials and the NIH Clinical Center and can be utilized at other cell therapy manufacturing sites that wish to scale-up and optimize their processing using closed systems.

  10. A Proposal of Operational Risk Management Method Using FMEA for Drug Manufacturing Computerized System

    Science.gov (United States)

    Takahashi, Masakazu; Nanba, Reiji; Fukue, Yoshinori

    This paper proposes operational Risk Management (RM) method using Failure Mode and Effects Analysis (FMEA) for drug manufacturing computerlized system (DMCS). The quality of drug must not be influenced by failures and operational mistakes of DMCS. To avoid such situation, DMCS has to be conducted enough risk assessment and taken precautions. We propose operational RM method using FMEA for DMCS. To propose the method, we gathered and compared the FMEA results of DMCS, and develop a list that contains failure modes, failures and countermeasures. To apply this list, we can conduct RM in design phase, find failures, and conduct countermeasures efficiently. Additionally, we can find some failures that have not been found yet.

  11. Towards energy and resource efficient manufacturing: A processes and systems approach

    DEFF Research Database (Denmark)

    Duflou, Joost R.; Sutherland, John W.; Dornfeld, David

    2012-01-01

    , distinguishing different system scale levels, is applied: starting from a unit process focus, respectively the multi-machine, factory, multi-facility and supply chain levels are covered. Determined by the research contributions reported in literature, the de facto focus of the paper is mainly on energy related......This paper aims to provide a systematic overview of the state of the art in energy and resource efficiency increasing methods and techniques in the domain of discrete part manufacturing, with attention for the effectiveness of the available options. For this purpose a structured approach...

  12. Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture

    Science.gov (United States)

    Steele, Kerry D [Kennewick, WA; Anderson, Gordon A [Benton City, WA; Gilbert, Ronald W [Morgan Hill, CA

    2011-02-01

    Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture are described. In one aspect, a communications device identification method includes providing identification information regarding a group of wireless identification devices within a wireless communications range of a reader, using the provided identification information, selecting one of a plurality of different search procedures for identifying unidentified ones of the wireless identification devices within the wireless communications range, and identifying at least some of the unidentified ones of the wireless identification devices using the selected one of the search procedures.

  13. Graduate and Ph.D. Course on Design and Manufacture of Micro Mechanical Systems

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; De Grave, Arnaud

    2011-01-01

    Micro mechanical components play an increasing role in micro systems with product dimensions ranging from micrometers to millimetres. The use of metals, polymers and ceramics for miniature components requires product development methods as well as specific manufacturing technologies. Indeed...... it is now well known that micro/nanotechnology is not only a matter of downscaling applications and methods from the macro scale, and therefore an in-depth understanding and knowledge of product and process characteristics at this scale is necessary. Based on this challenge, a new course was developed...

  14. Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture

    Science.gov (United States)

    McCown, Steven H [Rigby, ID; Derr, Kurt W [Idaho Falls, ID; Rohde, Kenneth W [Idaho Falls, ID

    2012-05-08

    Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

  15. Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-22

    This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided.

  16. Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1

    International Nuclear Information System (INIS)

    1995-01-01

    This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided

  17. Learning Management System Calendar Reminders and Effects on Time Management and Academic Performance

    Science.gov (United States)

    Mei, Jianyang

    2016-01-01

    This research project uses a large research university in the Midwest as a research site to explore the time management skills of international students and analyzes how using the Course Hack, an online Learning Management System (LMS) calendar tool, improves participants' time management skills and positively impacts their academic performance,…

  18. The academic story: introducing the clinical nurse leader role in a multifacility health care system.

    Science.gov (United States)

    Moore, Penny

    2013-01-01

    Introducing the clinical nurse leader (CNL) role in a multifacility health care system is an exciting but obstacle-filled journey. This story includes facilitating factors, opportunities, and successes plus suggestions for other academic-practice partners considering implementing the CNL role. A sample course sequence with course descriptions is provided. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. Effects of an Intelligent Web-Based English Instruction System on Students' Academic Performance

    Science.gov (United States)

    Jia, J.; Chen, Y.; Ding, Z.; Bai, Y.; Yang, B.; Li, M.; Qi, J.

    2013-01-01

    This research conducted quasi-experiments in four middle schools to evaluate the long-term effects of an intelligent web-based English instruction system, Computer Simulation in Educational Communication (CSIEC), on students' academic attainment. The analysis of regular examination scores and vocabulary test validates the positive impact of CSIEC,…

  20. A Complex Systems Framework for Research on Leadership and Organizational Dynamics in Academic Libraries

    Science.gov (United States)

    Gilstrap, Donald L.

    2009-01-01

    This article provides a historiographical analysis of major leadership and organizational development theories that have shaped our thinking about how we lead and administrate academic libraries. Drawing from behavioral, cognitive, systems, and complexity theories, this article discusses major theorists and research studies appearing over the past…

  1. Using Systemic Functional Linguistics in Academic Writing Development: An Example from Film Studies

    Science.gov (United States)

    Donohue, James P.

    2012-01-01

    On film studies courses, students are asked to treat as objects of study the same films which they may more commonly experience as entertainment. To explore the role of academic writing in this, an action research project was carried out on a university film studies course using a systemic functional linguistics approach. This paper presents a key…

  2. Multi-objective group scheduling with learning effect in the cellular manufacturing system

    Directory of Open Access Journals (Sweden)

    Mohammad Taghi Taghavi-fard

    2011-01-01

    Full Text Available Group scheduling problem in cellular manufacturing systems consists of two major steps. Sequence of parts in each part-family and the sequence of part-family to enter the cell to be processed. This paper presents a new method for group scheduling problems in flow shop systems where it minimizes makespan (Cmax and total tardiness. In this paper, a position-based learning model in cellular manufacturing system is utilized where processing time for each part-family depends on the entrance sequence of that part. The problem of group scheduling is modeled by minimizing two objectives of position-based learning effect as well as the assumption of setup time depending on the sequence of parts-family. Since the proposed problem is NP-hard, two meta heuristic algorithms are presented based on genetic algorithm, namely: Non-dominated sorting genetic algorithm (NSGA-II and non-dominated rank genetic algorithm (NRGA. The algorithms are tested using randomly generated problems. The results include a set of Pareto solutions and three different evaluation criteria are used to compare the results. The results indicate that the proposed algorithms are quite efficient to solve the problem in a short computational time.

  3. Towards the implementation of e-manufacturing: design of an automatic tea drying control system

    Directory of Open Access Journals (Sweden)

    Mabvuu, Never

    2014-11-01

    Full Text Available Many of the production costs for producing tea are attributable to the process of drying the tea. E-manufacturing can assist companies to reduce these production costs by making crucial information available to decision-makers so that they can make informed decisions. This paper presents an application of e-manufacturing to the design of an automatic tea drying control system. This control system will ensure that the multiple drying parameters such as temperature, dryer-exit tea moisture content, and fuel consumption are maintained at optimal states during the course of the drying of tea. The additional aim of this system is to balance the cost of production and the quality of the final product. Using the Guggenheim-Anderson-De Boer (GAB model, the optimum drying temperature was found to be 100-110°C, while maintaining a dryer-exit tea moisture content of 3 to 3.12 per cent, at a drying rate of 3 per cent per minute. A Barix control application to control the system’s activities, using the web user interface (WUI, was also developed.

  4. Parasympathetic Nervous System Reactivity Moderates Associations Between Children's Executive Functioning and Social and Academic Competence.

    Science.gov (United States)

    McQuade, Julia D; Penzel, Taylor E; Silk, Jennifer S; Lee, Kyung Hwa

    2017-10-01

    This study examined whether children with poor executive functioning (EF) evidenced less social and academic impairments, compared to other children, if they demonstrated adaptive parasympathetic nervous system (PNS) regulation during experiences of failure. Participants with and without clinical elevations in ADHD symptoms (N = 61; 9-13 years; 48% male; 85% Caucasian) were administered a battery of EF tests and completed manipulated social and cognitive failure tasks. While participants completed failure tasks, respiratory sinus arrhythmia reactivity (RSA-R) was measured as an indicator of PNS reactivity. Children's social and academic impairment in daily life was assessed based on parent and teacher report on multiple measures. RSA-R during social failure moderated the association between poor EF and adult-rated social impairment and RSA-R during cognitive failure moderated the association between poor EF and adult-rated academic impairment. Simple effects indicated that poor EF was significantly associated with impairment when children demonstrated RSA activation (increased PNS activity) but not when children demonstrated RSA withdrawal (decreases in PNS activity). Domain-crossed models (e.g., reactivity to social failure predicting academic impairment) were not significant, suggesting that the moderating effect of RSA-R was domain-specific. Results suggest that not all children with poor EF evidence social and academic impairment; RSA withdrawal during experiences of failure may be protective specifically for children with impaired EF skills.

  5. System-justifying ideologies and academic outcomes among first-year Latino college students.

    Science.gov (United States)

    O'Brien, Laurie T; Mars, Dustin E; Eccleston, Collette

    2011-10-01

    The present study examines the relationship between system-justifying ideologies and academic outcomes among 78 first-year Latino college students (21 men, 57 women, mean age = 18.1 years) attending a moderately selective West Coast university. Endorsement of system-justifying ideologies was negatively associated with grade point average (GPA); however it was positively associated with feelings of belonging at the university. In addition, system-justifying ideologies were negatively associated with perceptions of personal discrimination. In contrast, ethnic identity centrality was unrelated to GPA, feelings of belonging, and perceptions of personal discrimination once the relationship between system-justifying ideologies and these outcomes was statistically taken into account. The results of the present study suggest that endorsement of system-justifying ideologies may be a double-edged sword for Latino college students, involving trade-offs between academic success and feelings of belonging.

  6. Manufacturing of a superconducting magnet system for 28 GHz electron cyclotron resonance ion source at KBSI.

    Science.gov (United States)

    Lee, B S; Choi, S; Yoon, J H; Park, J Y; Won, M S

    2012-02-01

    A magnet system for a 28 GHz electron cyclotron resonance ion source is being developed by the Korea Basic Science Institute. The configuration of the magnet system consists of 3 solenoid coils for a mirror magnetic field and 6 racetrack coils for a hexapole magnetic field. They can generate axial magnetic fields of 3.6 T at the beam injection part and 2.2 T at the extraction part. A radial magnetic field of 2.1 T is achievable at the plasma chamber wall. A step type winding process was employed in fabricating the hexapole coil. The winding technique was confirmed through repeated cooling tests. Superconducting magnets and a cryostat system are currently being manufactured.

  7. Inter-Enterprise Planning of Manufacturing Systems Applying Simulation with IPR Protection

    Science.gov (United States)

    Mertins, Kai; Rabe, Markus

    Discrete Event Simulation is a well-proved method to analyse the dynamic behaviour of manufacturing systems. However, simulation application is still poor for external supply chains or virtual enterprises, encompassing several legal entities. Most conventional simulation systems provide no means to protect intellectual property rights (IPR), nor methods to support cross-enterprise teamwork. This paper describes a solution to keep enterprise models private, but still provide their functionality for cross-enterprise evaluation purposes. Applying the new modelling system, the inter-enterprise business process is specified by the user, including a specification of the objects exchanged between the local models. The required environment for a distributed simulation is generated automatically. The mechanisms have been tested with a large supply chain model.

  8. 'LABNOTE', a laboratory notebook system designed for academic genomics groups.

    Science.gov (United States)

    Imbert, M C; Nguyen, V K; Granjeaud, S; Nguyen, C; Jordan, B R

    1999-01-15

    We have developed a relational laboratory database system, adapted to the daily book-keeping needs of laboratories that must keep track of information acquired on hundreds or thousands of clones in an effective and user-friendly fashion. Data, whether final or related to experiments in progress, can be accessed in many different ways, e.g. by clone name, by gene, by experiment or through DNA sequence. Updating, import and export of results is made easier by specially developed tools. This system, in network version, serves several groups in our Institute and (over the Internet) elsewhere, and is instrumental in collaborative studies based on expression profiling. It can be used in many similar situations involving progressiveaccumulation of information on sets of clones or related objects.

  9. Evaluation of SHM system produced by additive manufacturing via acoustic emission and other NDT methods.

    Science.gov (United States)

    Strantza, Maria; Aggelis, Dimitrios G; de Baere, Dieter; Guillaume, Patrick; van Hemelrijck, Danny

    2015-10-21

    During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called "effective structural health monitoring" (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life safety and reduce direct operative costs. It operates based on a network of capillaries that are integrated into an AM structure. The internal pressure of the capillaries is continuously monitored by a pressure sensor. When a crack nucleates and reaches the capillary, the internal pressure changes signifying the existence of the flaw. The main objective of this paper is to evaluate the crack detection capacity of the eSHM system and crack location accuracy by means of various non-destructive testing (NDT) techniques. During this study, detailed acoustic emission (AE) analysis was applied in AM materials for the first time in order to investigate if phenomena like the Kaiser effect and waveform parameters used in conventional metals can offer valuable insight into the damage accumulation of the AM structure as well. Liquid penetrant inspection, eddy current and radiography were also used in order to confirm the fatigue damage and indicate the damage location on un-notched four-point bending AM metallic specimens with an integrated eSHM system. It is shown that the eSHM system in combination with NDT can provide correct information on the damage condition of additive manufactured metals.

  10. Based on Weibull Information Fusion Analysis Semiconductors Quality the Key Technology of Manufacturing Execution Systems Reliability

    Science.gov (United States)

    Huang, Zhi-Hui; Tang, Ying-Chun; Dai, Kai

    2016-05-01

    Semiconductor materials and Product qualified rate are directly related to the manufacturing costs and survival of the enterprise. Application a dynamic reliability growth analysis method studies manufacturing execution system reliability growth to improve product quality. Refer to classical Duane model assumptions and tracking growth forecasts the TGP programming model, through the failure data, established the Weibull distribution model. Combining with the median rank of average rank method, through linear regression and least squares estimation method, match respectively weibull information fusion reliability growth curve. This assumption model overcome Duane model a weakness which is MTBF point estimation accuracy is not high, through the analysis of the failure data show that the method is an instance of the test and evaluation modeling process are basically identical. Median rank in the statistics is used to determine the method of random variable distribution function, which is a good way to solve the problem of complex systems such as the limited sample size. Therefore this method has great engineering application value.

  11. Manufacture and test of prototype water pipe chase barrier in ITER Magnet Feeder system

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Kun, E-mail: lukun@ipp.ac.cn [Institute of Plasma Physics, Shushan Hu Road 350, Hefei, Anhui (China); Wen, Xinjie; Liu, Chen; Song, Yuntao [Institute of Plasma Physics, Shushan Hu Road 350, Hefei, Anhui (China); Niu, Erwu [ITER China, 15B Fuxing Road, Beijing 100862 (China); Gung, Chenyu; Su, Man [ITER Organization, Route de Vinon-sur-Verdon – CS 90046, 13067 St Paul-lez-Durance Cedex (France)

    2016-11-01

    The Magnet Feeder system in the International Thermonuclear Experimental Reactor (ITER) deploys electrical currents and supercritical helium to the superconducting magnets and the magnet diagnostic signals to the operators. In the current design, the feeders located in the upper L3 level of the Tokamak gallery penetrate the Tokamak coolant water system vault, the biological shield and the cryostat. As a secondary confinement to contain the activated coolant water in the vault in the case of water pipe burst accident, a water barrier is welded between the penetration in the water pipe chase outer wall and the mid-plane of the vacuum jacket of the Feeder Coil Terminal Box (CTB). A thin-wall stainless steel diaphragm with an omega shape profile is welded around the CTB as the water barrier to endure 2 bar hydraulic pressure. In addition, the barrier is designed as a flexible compensator to withstand a maximum of 15 mm of axial displacement of the CTB in case of helium leak accident without failure. This paper presents the detail configuration, the manufacturing and assembly processes of the water barrier. Test results of the prototype water barrier under simulated accident conditions are also reported. Successful qualification of the design and manufacturing process of the water barrier lays a good foundation for the series production of this subsystem.

  12. Essential Aspects in Assessing the Safety Impact of Interactions between a Drug Product and Its Associated Manufacturing System.

    Science.gov (United States)

    Jenke, Dennis

    2012-01-01

    An emerging trend in the biotechnology industry is the utilization of plastic components in manufacturing systems for the production of an active pharmaceutical ingredient (API) or a finished drug product (FDP). If the API, the FDP, or any solution used to generate them (for example, process streams such as media, buffers, and the like) come in contact with a plastic at any time during the manufacturing process, there is the potential that substances leached from the plastic may accumulate in the API or FDP, affecting safety and/or efficacy. In this article the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the article outlines the safety assessment process for manufacturing systems, specifically addressing the topics of risk management and the role of compendial testing. Finally, the proper use of vendor-supplied extractables information is considered. Manufacturing suites used to produce biopharmaceuticals can include components that are made out of plastics. Thus it is possible that substances could leach out of the plastics and into manufacturing solutions, and it is further possible that such leachables could accumulate in the pharmaceutical product. In this article, the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the author proposes a process by which the impact on product safety of such leached substances can be assessed.

  13. Distinctions between intelligent manufactured and constructed systems and a new discipline for intelligent infrastructure hypersystems

    Science.gov (United States)

    Aktan, A. Emin

    2003-08-01

    Although the interconnected systems nature of the infrastructures, and the complexity of interactions between their engineered, socio-technical and natural constituents have been recognized for some time, the principles of effectively operating, protecting and preserving such systems by taking full advantage of "modeling, simulations, optimization, control and decision making" tools developed by the systems engineering and operations research community have not been adequately studied or discussed by many engineers including the writer. Differential and linear equation systems, numerical and finite element modeling techniques, statistical and probabilistic representations are universal, however, different disciplines have developed their distinct approaches to conceptualizing, idealizing and modeling the systems they commonly deal with. The challenge is in adapting and integrating deterministic and stochastic, geometric and numerical, physics-based and "soft (data-or-knowledge based)", macroscopic or microscopic models developed by various disciplines for simulating infrastructure systems. There is a lot to be learned by studying how different disciplines have studied, improved and optimized the systems relating to various processes and products in their domains. Operations research has become a fifty-year old discipline addressing complex systems problems. Its mathematical tools range from linear programming to decision processes and game theory. These tools are used extensively in management and finance, as well as by industrial engineers for optimizing and quality control. Progressive civil engineering academic programs have adopted "systems engineering" as a focal area. However, most of the civil engineering systems programs remain focused on constructing and analyzing highly idealized, often generic models relating to the planning or operation of transportation, water or waste systems, maintenance management, waste management or general infrastructure hazards

  14. Investigating the Supply Chain Strategies and Information System Strategies Alignment and its Effects on Supply Chain Management Performance (Case Study: Manufacturing Firms in Khuzestan Province, Iran

    Directory of Open Access Journals (Sweden)

    Belghis Bavarsad

    2016-12-01

    Full Text Available The purpose of the present study is to investigate the supply chain strategies and information system strategies alignment and the impact of these two strategies on supply chain management performance of manufacturing firms in Khuzestan province. The population of this applied research consisted of 1716 manufacturing firms and with using Cochran's formula for limited society, 231 firms were selected. Statistical unit of society were the purchasing / logistic managers of said firms and research questionnaire was distributed to them for each firm. The data collection instrument is Qrunfleh (2010 questionnaire, which its content validity was evaluated through experts and academics and its construct validity was confirmed through confirmatory factor analysis. Structural equation models and SPSS 22 have been used in order to analysis the data. The results showed that, all components of supply chain strategies (lean, agile and hybrid have a positive and significant impact on supply chain management performance and the moderate role of Information system strategies (efficient, flexible and comprehensive on supply chain management Performance also conformed.

  15. Evolutionary approaches for scheduling a flexible manufacturing system with automated guided vehicles and robots

    Directory of Open Access Journals (Sweden)

    Ramaraj Natarajan

    2012-08-01

    Full Text Available This paper addresses the scheduling of machines, an Automated Guided Vehicle (AGV and two robots in a Flexible Manufacturing System (FMS formed in three loop layouts, with objectives to minimize the makespan, mean flow time and mean tardiness. The scheduling optimization is carried out using Sheep Flock Heredity Algorithm (SFHA and Artificial Immune System (AIS algorithm. AGV is used for carrying jobs between the Load/Unload station and the machines. The robots are used for loading and unloading the jobs in the machines, and also used for transferring jobs between the machines. The algorithms are applied for test problems taken from the literature and the results obtained using the two algorithms are compared. The results indicate that SFHA performs better than AIS for this problem.

  16. From academic to applied: Operationalising resilience in river systems

    Science.gov (United States)

    Parsons, Melissa; Thoms, Martin C.

    2018-03-01

    The concept of resilience acknowledges the ability of societies to live and develop with dynamic environments. Given the recognition of the need to prepare for anticipated and unanticipated shocks, applications of resilience are increasing as the guiding principle of public policy and programs in areas such as disaster management, urban planning, natural resource management, and climate change adaptation. River science is an area in which the adoption of resilience is increasing, leading to the proposition that resilience may become a guiding principle of river policy and programs. Debate about the role of resilience in rivers is part of the scientific method, but disciplinary disunity about the ways to approach resilience application in policy and programs may leave river science out of the policy process. We propose six elements that need to be considered in the design and implementation of resilience-based river policy and programs: rivers as social-ecological systems; the science-policy interface; principles, capacities, and characteristics of resilience; cogeneration of knowledge; adaptive management; and the state of the science of resilience.

  17. Assessing the interaction effect of cost control systems and information technology integration on manufacturing plant financial performance

    OpenAIRE

    Maiga, Adam S; Nilsson, Anders; Jacobs, Fred

    2014-01-01

    The interface between management control and information technology is an under-developed research area with a knowledge gap concerning its implications for financial performance. This study contributes to bridging this gap by investigates the interaction effect of cost control systems and information technology integration on manufacturing plant financial performance. We surveyed a sample of 518 managers of U.S. manufacturing plants, approximately evenly distributed between those using activ...

  18. Academic Health Systems Management: The Rationale Behind Capitated Contracts

    Science.gov (United States)

    Taheri, Paul A.; Butz, David A.; Greenfield, Lazar J.

    2000-01-01

    Objective To determine why hospitals enter into “capitated” contracts, which often generate accounting losses. The authors’ hypothesis is that hospitals coordinate contracts to keep beds full and that in principal, capitated contracts reflect sound capacity management. Summary Background Data In high-overhead industries, different consumers pay different prices for similar services (e.g., full-fare vs. advanced-purchase plane tickets, full tuition vs. financial aid). Some consumers gain access by paying less than total cost. Hospitals, like other high-overhead business enterprises, must optimize the use of their capacity, amortizing overhead over as many patients as possible. This necessity for enhanced throughput forces hospitals and health systems to discount empty beds, sometimes to the point where they incur accounting losses serving some payors. Methods The authors analyzed the cost accounting system at their university teaching hospital to compare hospital and intensive care unit (ICU) lengths of stay (LOS), variable direct costs (VDC), overhead of capitated patients, and reimbursement versus other payors for all hospital discharges (n = 29,036) in fiscal year 1998. The data were analyzed by diagnosis-related groups (DRGs), length of stay (LOS), insurance carrier, proximity to hospital, and discharge disposition. Patients were then distinguished across payor categories based on their resource utilization, proximity to the hospital, DRG, LOS, and discharge status. Results The mean cost for capitated patients was $4,887, less than half of the mean cost of $10,394 for the entire hospitalized population. The mean capitated reimbursement was $928/day, exceeding the mean daily VDC of $616 but not the total cost of $1,445/day. Moreover, the mean total cost per patient day of treating a capitated patient was $400 less than the mean total cost per day for noncapitated patients. The hospital’s capitated health maintenance organization (HMO) patients made up 16

  19. Academic health systems management: the rationale behind capitated contracts.

    Science.gov (United States)

    Taheri, P A; Butz, D A; Greenfield, L J

    2000-06-01

    To determine why hospitals enter into "capitated" contracts, which often generate accounting losses. The authors' hypothesis is that hospitals coordinate contracts to keep beds full and that in principal, capitated contracts reflect sound capacity management. In high-overhead industries, different consumers pay different prices for similar services (e.g., full-fare vs. advanced-purchase plane tickets, full tuition vs. financial aid). Some consumers gain access by paying less than total cost. Hospitals, like other high-overhead business enterprises, must optimize the use of their capacity, amortizing overhead over as many patients as possible. This necessity for enhanced throughput forces hospitals and health systems to discount empty beds, sometimes to the point where they incur accounting losses serving some payors. The authors analyzed the cost accounting system at their university teaching hospital to compare hospital and intensive care unit (ICU) lengths of stay (LOS), variable direct costs (VDC), overhead of capitated patients, and reimbursement versus other payors for all hospital discharges (n = 29,036) in fiscal year 1998. The data were analyzed by diagnosis-related groups (DRGs), length of stay (LOS), insurance carrier, proximity to hospital, and discharge disposition. Patients were then distinguished across payor categories based on their resource utilization, proximity to the hospital, DRG, LOS, and discharge status. The mean cost for capitated patients was $4,887, less than half of the mean cost of $10,394 for the entire hospitalized population. The mean capitated reimbursement was $928/day, exceeding the mean daily VDC of $616 but not the total cost of $1,445/day. Moreover, the mean total cost per patient day of treating a capitated patient was $400 less than the mean total cost per day for noncapitated patients. The hospital's capitated health maintenance organization (HMO) patients made up 16. 0% of the total admissions but only 9.4% of the total

  20. Development of an Adaptive Forecasting System: A Case Study of a PC Manufacturer in South Korea

    Directory of Open Access Journals (Sweden)

    Chihyun Jung

    2016-03-01

    Full Text Available We present a case study of the development of an adaptive forecasting system for a leading personal computer (PC manufacturer in South Korea. It is widely accepted that demand forecasting for products with short product life cycles (PLCs is difficult, and the PLC of a PC is generally very short. The firm has various types of products, and the volatile demand patterns differ by product. Moreover, we found that different departments have different requirements when it comes to the accuracy, point-of-time and range of the forecasts. We divide the demand forecasting process into three stages depending on the requirements and purposes. The systematic forecasting process is then introduced to improve the accuracy of demand forecasting and to meet the department-specific requirements. Moreover, a newly devised short-term forecasting method is presented, which utilizes the long-term forecasting results of the preceding stages. We evaluate our systematic forecasting methods based on actual sales data from the PC manufacturer, where our forecasting methods have been implemented.

  1. An alternative approach in operator allocation labor intensive manufacturing system: A three-phase methodology framework

    Science.gov (United States)

    Mat Rani, Ruzanita; Ismail, Wan Rosmanira

    2013-04-01

    Operator allocation is one of the most important decisions that can affect productivity in labor-intensive manufacturing system. Improper decision on operator allocation will reduce company's throughput and increase waste. Therefore, all factors such as operators' performance and operational constraints need to be considered in making the best operator allocation decision. Most of previous studies used two phases methodology. In two phases methodology, they used operational constraints and treated all operators to have the same level of performance for making decision on operator allocation. Therefore, in this paper a three-phase methodology is proposed to determine the optimal operator allocation. This methodology advances the existing approach on operator allocation by combining operators' performance and operational constraints. The methodology starts with evaluating the operators' performance. Then, it is followed with determining inputs and outputs for operator allocation alternatives and it ends with determining the optimal operator allocation. This paper will give ideas and directions to the management of the manufacturing company in determining the optimal operator allocation decision.

  2. Arsenic removal using steel manufacturing byproducts as permeable reactive materials in mine tailing containment systems.

    Science.gov (United States)

    Ahn, Joo Sung; Chon, Chul-Min; Moon, Hi-Soo; Kim, Kyoung-Woong

    2003-05-01

    Steel manufacturing byproducts were tested as a means of treating mine tailing leachate with a high As concentration. Byproduct materials can be placed in situ as permeable reactive barriers to control the subsurface release of leachate from tailing containment systems. The tested materials had various compositions of elemental Fe, Fe oxides, Ca-Fe oxides and Ca hydroxides typical of different steel manufacturing processes. Among these materials, evaporation cooler dust (ECD), oxygen gas sludge (OGS), basic oxygen furnace slag (BOFS) and to a lesser degree, electrostatic precipitator dust (EPD) effectively removed both As(V) and As(III) during batch experiments. ECD, OGS and BOFS reduced As concentrations to <0.5mg/l from 25mg/l As(V) or As(III) solution in 72 h, exhibiting higher removal capacities than zero-valent iron. High Ca concentrations and alkaline conditions (pH ca. 12) provided by the dissolution of Ca hydroxides may promote the formation of stable, sparingly soluble Ca-As compounds. When initial pH conditions were adjusted to 4, As reduction was enhanced, probably by adsorption onto iron oxides. The elution rate of retained As from OGS and ECD decreased with treatment time, and increasing the residence time in a permeable barrier strategy would be beneficial for the immobilization of As. When applied to real tailing leachate, ECD was found to be the most efficient barrier material to increase pH and to remove As and dissolved metals.

  3. Management systems oriented to projects: need for its implementation in sports academic institutions

    Directory of Open Access Journals (Sweden)

    Maidelyn Díaz Pérez

    2017-12-01

    Full Text Available The literature refers to the need that all academic institutions have today to use information systems articulated with the different processes that the organization executes. The idea of using this type of system is to convert the available information into knowledge that represents a competitive advantage for the organization. However, despite being a strength for any organization both to manage their strategic information and to manage the information generated by research projects, they are still not widely used. The reality shows that the academic sports institutions of the country and mainly the faculties of physical culture lack a culture in the use of systems to manage different substantive tasks of the center, such as the activity of research projects. It is estimated that if they rely more on the optimal use of the information and knowledge they have at the group level, all their scientific production indicators will be significantly increased. From this scenario, this research aims to expose the main strengths of information and knowledge management systems, mainly those aimed at projects for the stimulation of their use and implementation in academic institutions associated with sports. To achieve this objective, the logical historical method, direct observation, the method of analysis and synthesis, etc. were used. And among the main results obtained in this research there  is the relevance of the use of information management systems and knowledge aimed at projects to contribute to the promotion and success of research activities generated by projects.

  4. The theory of constraints applied in a manufacture CAD-CAM system in the industry Metalworking-plastic

    Directory of Open Access Journals (Sweden)

    Luis Juiña

    2017-06-01

    Full Text Available In the following project, the theory of constraints was applied in order to implement a manufacture CAD-CAM system into the metal mechanic industry processes of polymers injection and blown of polymers. The research showed that the manufacture of the mold with the engraving took 223,17 hours. In the workflow for the manufacture of the mold, a restriction was found in the outsource service of CNC. It took 120 hours of the whole process and represent the 51,47 % the total time of tooling manufacturing. There is also a constraint found in the design time. It was 60 hours that corresponds to 26,88 % of the overall time. In order to reduce the time, a modern system of design in 3D and CAM was established to improve the model process of design and manufacture. A simulation by computational resource was applied to the plastic. The design was changed from 2D to 3D. The implementation was focused in the design. A software was installed to improve the speed of modeling methods with reliable information. In the manufacture of molds, a new CNC machine was acquired with three simultaneous axes to eliminate the outsource service. By acquiring the design system, the working time was diminished in 79% and regarding to the CNC process, the working time was improved in 88%.

  5. Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications

    Energy Technology Data Exchange (ETDEWEB)

    Ulsh, M.; Wheeler, D.; Protopappas, P.

    2011-08-01

    The U.S. Department of Energy (DOE) is interested in supporting manufacturing research and development (R&D) for fuel cell systems in the 10-1,000 kilowatt (kW) power range relevant to stationary and distributed combined heat and power applications, with the intent to reduce manufacturing costs and increase production throughput. To assist in future decision-making, DOE requested that the National Renewable Energy Laboratory (NREL) provide a baseline understanding of the current levels of adoption of automation in manufacturing processes and flow, as well as of continuous processes. NREL identified and visited or interviewed key manufacturers, universities, and laboratories relevant to the study using a standard questionnaire. The questionnaire covered the current level of vertical integration, the importance of quality control developments for automation, the current level of automation and source of automation design, critical balance of plant issues, potential for continuous cell manufacturing, key manufacturing steps or processes that would benefit from DOE support for manufacturing R&D, the potential for cell or stack design changes to support automation, and the relationship between production volume and decisions on automation.

  6. (Dysfunctionality of accounting cost systems in manufacturing companies of Tuzla canton

    Directory of Open Access Journals (Sweden)

    Sado Puškarević

    2014-12-01

    Full Text Available This paper shows the results of the conducted primary survey on functionality of cost systems in manufacturing companies of Tuzla Canton (hereinafter “TC”. This paper assesses their adequacy to the needs of these companies: the present needs, and the ones that will be brought by the changes in the environment. These systems have to be up-to-date, as they influence the process of cost management, which is the key factor of companies’ adaptation to the conditions of a modern market. Cost management, which is based on the information of a cost system, enables the company to take the adequate stand towards customers on markets and toward their competition. Also, the quality cost information is a precondition for effective and efficient allocation of limited resources in a transitional period of society development. Therefore, only quality designed cost system in transitional economy will enable recovery, and then, growth and development of a company. This emphasizes the importance of research of the stated issues for transitional countries. The research results should also help to persuade the management about the need to modernize the operation organization, primarily the accounting function, mainly in the part of cost system organization. The determined defects, as well as deviances in relation to current needs for information about costs, are guidelines for an adequate process of redesigning cost systems in companies of transitional economy.

  7. Transforming rural health systems through clinical academic leadership: lessons from South Africa.

    Science.gov (United States)

    Doherty, J E; Couper, I D; Campbell, D; Walker, J

    2013-01-01

    Under-resourced and poorly managed rural health systems challenge the achievement of universal health coverage, and require innovative strategies worldwide to attract healthcare staff to rural areas. One such strategy is rural health training programs for health professionals. In addition, clinical leadership (for all categories of health professional) is a recognised prerequisite for substantial improvements in the quality of care in rural settings. Rural health training programs have been slow to develop in low- and middle-income countries (LMICs); and the impact of clinical leadership is under-researched in such settings. A 2012 conference in South Africa, with expert input from South Africa, Canada and Australia, discussed these issues and produced recommendations for change that will also be relevant in other LMICs. The two underpinning principles were that: rural clinical leadership (both academic and non-academic) is essential to developing and expanding rural training programs and improving care in LMICs; and leadership can be learned and should be taught. The three main sets of recommendations focused on supporting local rural clinical academic leaders; training health professionals for leadership roles in rural settings; and advancing the clinical academic leadership agenda through advocacy and research. By adopting the detailed recommendations, South Africa and other LMICs could energise management strategies, improve quality of care in rural settings and impact positively on rural health outcomes.

  8. A novel framework for intelligent surveillance system based on abnormal human activity detection in academic environments.

    Science.gov (United States)

    Al-Nawashi, Malek; Al-Hazaimeh, Obaida M; Saraee, Mohamad

    2017-01-01

    Abnormal activity detection plays a crucial role in surveillance applications, and a surveillance system that can perform robustly in an academic environment has become an urgent need. In this paper, we propose a novel framework for an automatic real-time video-based surveillance system which can simultaneously perform the tracking, semantic scene learning, and abnormality detection in an academic environment. To develop our system, we have divided the work into three phases: preprocessing phase, abnormal human activity detection phase, and content-based image retrieval phase. For motion object detection, we used the temporal-differencing algorithm and then located the motions region using the Gaussian function. Furthermore, the shape model based on OMEGA equation was used as a filter for the detected objects (i.e., human and non-human). For object activities analysis, we evaluated and analyzed the human activities of the detected objects. We classified the human activities into two groups: normal activities and abnormal activities based on the support vector machine. The machine then provides an automatic warning in case of abnormal human activities. It also embeds a method to retrieve the detected object from the database for object recognition and identification using content-based image retrieval. Finally, a software-based simulation using MATLAB was performed and the results of the conducted experiments showed an excellent surveillance system that can simultaneously perform the tracking, semantic scene learning, and abnormality detection in an academic environment with no human intervention.

  9. Development of 3D online contact measurement system for intelligent manufacturing based on stereo vision

    Science.gov (United States)

    Li, Peng; Chong, Wenyan; Ma, Yongjun

    2017-10-01

    In order to avoid shortcomings of low efficiency and restricted measuring range exsited in traditional 3D on-line contact measurement method for workpiece size, the development of a novel 3D contact measurement system is introduced, which is designed for intelligent manufacturing based on stereo vision. The developed contact measurement system is characterized with an intergarted use of a handy probe, a binocular stereo vision system, and advanced measurement software.The handy probe consists of six track markers, a touch probe and the associated elcetronics. In the process of contact measurement, the hand probe can be located by the use of the stereo vision system and track markers, and 3D coordinates of a space point on the workpiece can be mearsured by calculating the tip position of a touch probe. With the flexibility of the hand probe, the orientation, range, density of the 3D contact measurenent can be adptable to different needs. Applications of the developed contact measurement system to high-precision measurement and rapid surface digitization are experimentally demonstrated.

  10. Sustainable Product Service Systems in Small and Medium Enterprises (SMEs: Opportunities in the Leather Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Ricardo J. Hernández Pardo

    2012-01-01

    Full Text Available This paper presents an approach to identify opportunities to develop sustainable Product Service Systems (PSS involving Small and Medium Enterprises (SMEs. The purpose of the research is to build understanding of how the integration of product and service design and the use of Information and Communication Technologies (ICT can contribute to identify opportunities to develop sustainable PSS involving SMEs. In order to develop the approach, research with 16 Colombian Manufacturing SMEs was carried out. A reference model and four generic types of PSS according to the relationships between product and service design and ICT are used to analyse the data. Finally, the possibility of extending the approach into a general framework to work with other industries is discussed.

  11. Computer-implemented security evaluation methods, security evaluation systems, and articles of manufacture

    Science.gov (United States)

    Muller, George; Perkins, Casey J.; Lancaster, Mary J.; MacDonald, Douglas G.; Clements, Samuel L.; Hutton, William J.; Patrick, Scott W.; Key, Bradley Robert

    2015-07-28

    Computer-implemented security evaluation methods, security evaluation systems, and articles of manufacture are described. According to one aspect, a computer-implemented security evaluation method includes accessing information regarding a physical architecture and a cyber architecture of a facility, building a model of the facility comprising a plurality of physical areas of the physical architecture, a plurality of cyber areas of the cyber architecture, and a plurality of pathways between the physical areas and the cyber areas, identifying a target within the facility, executing the model a plurality of times to simulate a plurality of attacks against the target by an adversary traversing at least one of the areas in the physical domain and at least one of the areas in the cyber domain, and using results of the executing, providing information regarding a security risk of the facility with respect to the target.

  12. Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems.

    Science.gov (United States)

    Zhang, Jiaxiang; Vo, Anh Q; Feng, Xin; Bandari, Suresh; Repka, Michael A

    2018-06-25

    Inter-individual variability is always an issue when treating patients of different races, genders, ages, pharmacogenetics, and pharmacokinetic characteristics. However, the development of novel dosage forms is limited by the huge investments required for production line modifications and dosages diversity. Additive manufacturing (AM) or 3D printing can be a novel alternative solution for the development of controlled release dosages because it can produce personalized or unique dosage forms and more complex drug-release profiles. The primary objective of this manuscript is to review the 3D printing processes that have been used in the pharmaceutical area, including their general aspects, materials, and the operation of each AM technique. Advantages and shortcomings of the technologies are discussed with respect to practice and practical applications. Thus, this review will provide an overview and discussion on advanced pharmaceutical AM technologies, which can be used to produce unique controlled drug delivery systems and personalized dosages for the future of personalized medicine.

  13. Methods of defining ontologies, word disambiguation methods, computer systems, and articles of manufacture

    Science.gov (United States)

    Sanfilippo, Antonio P [Richland, WA; Tratz, Stephen C [Richland, WA; Gregory, Michelle L [Richland, WA; Chappell, Alan R [Seattle, WA; Whitney, Paul D [Richland, WA; Posse, Christian [Seattle, WA; Baddeley, Robert L [Richland, WA; Hohimer, Ryan E [West Richland, WA

    2011-10-11

    Methods of defining ontologies, word disambiguation methods, computer systems, and articles of manufacture are described according to some aspects. In one aspect, a word disambiguation method includes accessing textual content to be disambiguated, wherein the textual content comprises a plurality of words individually comprising a plurality of word senses, for an individual word of the textual content, identifying one of the word senses of the word as indicative of the meaning of the word in the textual content, for the individual word, selecting one of a plurality of event classes of a lexical database ontology using the identified word sense of the individual word, and for the individual word, associating the selected one of the event classes with the textual content to provide disambiguation of a meaning of the individual word in the textual content.

  14. Manufacturing of a high precision coil system for the Spanish Stellarator TJ-II

    International Nuclear Information System (INIS)

    Alonso, J.; Blaumoser, M.; Bieder, H.E.; Theisen, E.; Jeckle, A.; Brandl, M.; Mione, M.

    1995-01-01

    The flexible Heliac TJ-II is under construction at Ciemat in Madrid, Spain. This experimental device allows the investigation of plasmas in a wide range of magnetic field configurations. The rotational transform can be varied between 0.9 and 2.5. Shear variation is possible from -1% to 10%. The magnetic well ranges from 0 to 6%. The average major plasma radius is 1.5 m and the minor plasma dimensions are 0.4 m by 0.2 m. The average toroidal magnetic field is 1 T. The central part of TJ-II is a coil system called Hard Core. The manufacturing aspects of this component are described hereafter. The narrow range of tolerances of the different elements is consequence of the necessary precision of the coils that are located very close to the plasma. (orig.)

  15. A Method of Retrospective Computerized System Validation for Drug Manufacturing Software Considering Modifications

    Science.gov (United States)

    Takahashi, Masakazu; Fukue, Yoshinori

    This paper proposes a Retrospective Computerized System Validation (RCSV) method for Drug Manufacturing Software (DMSW) that relates to drug production considering software modification. Because DMSW that is used for quality management and facility control affects big impact to quality of drugs, regulatory agency required proofs of adequacy for DMSW's functions and performance based on developed documents and test results. Especially, the work that explains adequacy for previously developed DMSW based on existing documents and operational records is called RCSV. When modifying RCSV conducted DMSW, it was difficult to secure consistency between developed documents and test results for modified DMSW parts and existing documents and operational records for non-modified DMSW parts. This made conducting RCSV difficult. In this paper, we proposed (a) definition of documents architecture, (b) definition of descriptive items and levels in the documents, (c) management of design information using database, (d) exhaustive testing, and (e) integrated RCSV procedure. As a result, we could conduct adequate RCSV securing consistency.

  16. Autonomy and Complexity at Sandia Executive Summary of Academic Alliance Workshop on Autonomy and Complex Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, Nancy Kay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kleban, Stephen D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    Sandia has identified autonomy as a strategic initiative and an important area for providing national leadership. A key question is, “How might autonomy change how we think about the national security challenges we address and the kinds of solutions we deliver?” Three workshops at Sandia early in 2017 brought together internal stakeholders and potential academic partners in autonomy to address this question. The first focused on programmatic applications and needs. The second explored existing internal capabilities and research and development needs. This report summarizes the outcome of the third workshop, held March 3, 2017 in Albuquerque, NM, which engaged Academic Alliance partners in autonomy efforts at Sandia by discussing research needs and synergistic areas of interest within the complex systems and system modeling domains, and identifying opportunities for partnering on laboratory directed and other joint research opportunities.

  17. An academic radiology information system (RIS): a review of the commercial RIS systems, and how an individualized academic RIS can be created and utilized.

    Science.gov (United States)

    Tamm, E P; Kawashima, A; Silverman, P

    2001-06-01

    Current commercial radiology information systems (RIS) are designed for scheduling, billing, charge collection, and report dissemination. Academic institutions have additional requirements for their missions for teaching, research and clinical care. The newest versions of commercial RIS offer greater flexibility than prior systems. We sent questionnaires to Cerner Corporation, ADAC Health Care Information Systems, IDX Systems, Per-Se' Technologies, and Siemens Health Services regarding features of their products. All of the products we surveyed offer user customizable fields. However, most products did not allow the user to expand their product's data table. The search capabilities of the products varied. All of the products supported the Health Level 7 (HL-7) interface and the use of structured query language (SQL). All of the products were offered with an SQL editor for creating customized queries and custom reports. All products included capabilities for collecting data for quality assurance and included capabilities for tracking "interesting cases," though they varied in the functionality offered. No product offered dedicated functions for research. Alternatively, radiology departments can create their own client-server Windows-based database systems to supplement the capabilities of commercial systems. Such systems can be developed with "web-enabled" database products like Microsoft Access or Apple Filemaker Pro.

  18. Fuzzy methods in decision making process - A particular approach in manufacturing systems

    Science.gov (United States)

    Coroiu, A. M.

    2015-11-01

    We are living in a competitive environment, so we can see and understand that the most of manufacturing firms do the best in order to accomplish meeting demand, increasing quality, decreasing costs, and delivery rate. In present a stake point of interest is represented by the development of fuzzy technology. A particular approach for this is represented through the development of methodologies to enhance the ability to managed complicated optimization and decision making aspects involving non-probabilistic uncertainty with the reason to understand, development, and practice the fuzzy technologies to be used in fields such as economic, engineering, management, and societal problems. Fuzzy analysis represents a method for solving problems which are related to uncertainty and vagueness; it is used in multiple areas, such as engineering and has applications in decision making problems, planning and production. As a definition for decision making process we can use the next one: result of mental processes based upon cognitive process with a main role in the selection of a course of action among several alternatives. Every process of decision making can be represented as a result of a final choice and the output can be represented as an action or as an opinion of choice. Different types of uncertainty can be discovered in a wide variety of optimization and decision making problems related to planning and operation of power systems and subsystems. The mixture of the uncertainty factor in the construction of different models serves for increasing their adequacy and, as a result, the reliability and factual efficiency of decisions based on their analysis. Another definition of decision making process which came to illustrate and sustain the necessity of using fuzzy method: the decision making is an approach of choosing a strategy among many different projects in order to achieve some purposes and is formulated as three different models: high risk decision, usual risk

  19. Application of a B ampersand W developed computer aided pictorial process planning system to CQMS for manufacturing process control

    International Nuclear Information System (INIS)

    Johanson, D.C.; VandeBogart, J.E.

    1992-01-01

    Babcock ampersand Wilcox (B ampersand W) will utilize its internally developed Computer Aided Pictorial Process Planning or CAPPP (pronounced open-quotes cap cubedclose quotes) system to create a paperless manufacturing environment for the Collider Quadruple Magnets (CQM). The CAPPP system consists of networked personal computer hardware and software used to: (1) generate and maintain the documents necessary for product fabrication, (2) communicate the information contained in these documents to the production floor, and (3) obtain quality assurance and manufacturing feedback information from the production floor. The purpose of this paper is to describe the various components of the CAPPP system and explain their applicability to product fabrication, specifically quality assurance functions

  20. Automation system for quality control in manufacture of iodine-125 sealed sources used in brachytherapy

    International Nuclear Information System (INIS)

    Somessari, Samir L.; Feher, Anselmo; Sprenger, Francisco E.; Rostellato, Maria E.C.M.; Moura, Joao A.; Costa, Osvaldo L.; Calvo, Wilson A.P.

    2011-01-01

    The objective of this work is to develop an automation system for Quality Control in the production of Iodine-125 sealed sources, after undergoing the process of laser beam welding. These sources, also known as Iodine-125 seeds are used, successfully, in the treatment of cancer by brachytherapy, with low-dose rates. Each small seed is composed of a welded titanium capsule with 0.8 mm diameter and 4.5 mm in length, containing Iodine-125 adsorbed on an internal silver wire. The seeds are implanted in the human prostate to irradiate the tumor and treat the cancerous cells. The technology to automate the quality control system in the manufacture of Iodine-125 seeds consists in developing and associate mechanical parts, electronic components and pneumatic circuits to control machines and processes. The automation technology for Iodine-125 seed production developed in this work employs programmable logic controller, step motors, drivers of control, electrical-electronic interfaces, photoelectric sensors, interfaces of communication and software development. Industrial automation plays an important role in the production of Iodine-125 seeds, with higher productivity and high standard of quality, facilitating the implementation and operation of processes with good manufacturing practices. Nowadays, the Radiation Technology Center at IPEN-CNEN/SP imports and distributes 36,000 Iodine-125 seeds per year for clinics and hospitals in the whole country. However, the Brazilian potential market is of 8,000 Iodine-125 seeds per month. Therefore, the local production of these radioactive seeds has become a priority for the Institute, aiming to reduce the price and increase the supply to the population in Brazil. (author)

  1. Automation system for quality control in manufacture of iodine-125 sealed sources used in brachytherapy

    Energy Technology Data Exchange (ETDEWEB)

    Somessari, Samir L.; Feher, Anselmo; Sprenger, Francisco E.; Rostellato, Maria E.C.M.; Moura, Joao A.; Costa, Osvaldo L.; Calvo, Wilson A.P., E-mail: somessar@ipen.b, E-mail: afeher@ipen.b, E-mail: sprenger@ipen.b, E-mail: elisaros@ipen.b, E-mail: olcosta@ipen.b, E-mail: wapcalvo@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The objective of this work is to develop an automation system for Quality Control in the production of Iodine-125 sealed sources, after undergoing the process of laser beam welding. These sources, also known as Iodine-125 seeds are used, successfully, in the treatment of cancer by brachytherapy, with low-dose rates. Each small seed is composed of a welded titanium capsule with 0.8 mm diameter and 4.5 mm in length, containing Iodine-125 adsorbed on an internal silver wire. The seeds are implanted in the human prostate to irradiate the tumor and treat the cancerous cells. The technology to automate the quality control system in the manufacture of Iodine-125 seeds consists in developing and associate mechanical parts, electronic components and pneumatic circuits to control machines and processes. The automation technology for Iodine-125 seed production developed in this work employs programmable logic controller, step motors, drivers of control, electrical-electronic interfaces, photoelectric sensors, interfaces of communication and software development. Industrial automation plays an important role in the production of Iodine-125 seeds, with higher productivity and high standard of quality, facilitating the implementation and operation of processes with good manufacturing practices. Nowadays, the Radiation Technology Center at IPEN-CNEN/SP imports and distributes 36,000 Iodine-125 seeds per year for clinics and hospitals in the whole country. However, the Brazilian potential market is of 8,000 Iodine-125 seeds per month. Therefore, the local production of these radioactive seeds has become a priority for the Institute, aiming to reduce the price and increase the supply to the population in Brazil. (author)

  2. A commercial real-time manufacturing integration platform for the new control system on FTU

    International Nuclear Information System (INIS)

    Panella, M.; Bertocchi, A.; Bozzolan, V.; Buceti, G.; Centioli, C.; Imparato, A.; Mazza, G.; Torelli, C.; Vitale, V.

    1999-01-01

    In 1994 a working group was set up in Frascati to investigate how to build up a new control system for FTU (Frascati tokamak upgrade) considering the evolution in the information technology. Strong emphasis was placed on the use of standard solutions (be they de-facto or de-jure) and commercial platforms where-ever possible. This paper describes our operational experience with the new control system based on the commercial DEC BASEstar family of products. BASEstar is based on client/server computing technologies, providing an environment to collect, process, manage, distribute and integrate real time manufacturing data. UNIX, VMS, PC Win, OS-9 are integrated to handle hosts, PC, VME CPUs. A 4 GL programming language, CIMfast, has been used to handle via automatic procedures the tokamak discharge. X11 standard based mimics are available to display the plants status. A real flexibility of the whole system has been experience and the further use of the this system has been planned for the ITER DTP (divertor test platform). (orig.)

  3. Economic analysis of implementing respirator program or ventilation system in a manufacturing environment

    International Nuclear Information System (INIS)

    Saidi-Mehrabab, M.

    2000-01-01

    The techniques and methods of developing cost models for respirators are discussed. Models are developed and implemented in this study for nineteen types of respirators in two major classes (air-purifying and supplied-air) and one L EV system. One respirator model is selected for detailed discussion from among the twenty models. The technical cost method is used in constructing the cost models for each of the respirators and the L EV system. In this methodology, the costs of purchasing and using a typical respirator or L EV system are divided into two categories, variable costs and fixed costs. Variable costs consists of the cost of replaceable components and probabilistic mortality cost. Fixed cost is the annualized capital requirement plus interest cost. The criteria for estimating some of the cost elements are based on existing equations in the literature, engineering judgement and manufacturer-provided information. A technical cost model results from the integration of this information into a computerized framework. The cost models for discussion are presented in the order of increasing computational complexity. Through the economic analysis, the lowest cost type in each class of respirator is determined. The determination criteria are based on the minimum total annual cost and highest benefit cost ratio. The selected lowest cost respirators are compared with the L EV system from the economic standpoint to reveal the cost optimal alternative

  4. PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM) MELALUI SOFT SYSTEMS METHODOLOGY (SSM)

    OpenAIRE

    Slamet Budiarto

    2011-01-01

    Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE) digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems met...

  5. Academic productivity and its relationship to physician salaries in the University of California Healthcare System.

    Science.gov (United States)

    Fijalkowski, Natalia; Zheng, Luo Luo; Henderson, Michael T; Moshfeghi, Andrew A; Maltenfort, Mitchell; Moshfeghi, Darius M

    2013-07-01

    To evaluate whether physicians with higher academic productivity, as measured by the number of publications in Scopus and the Scopus Hirsch index (h-index), earn higher salaries. This was a cross-sectional study. Participants were ophthalmologists, otolaryngologists, neurosurgeons, and neurologists classified as "top earners" (>$100,000 annually) within the University of California (UC) healthcare system in 2008. Bibliometric searches on Scopus were conducted to retrieve the total number of publications and Hirsch indices (h-index), a measure of academic productivity. The association between the number of publications and h-index on physicians' total compensation was determined with multivariate regression models after controlling for the four specialties (ophthalmology, otolaryngology, neurosurgery, and neurology), the five institutions (UC San Francisco, UC Los Angeles, UC San Diego, UC Irvine, and UC Davis), and academic rank (assistant professor, associate professor, and professor). The UC healthcare system departments reported 433 faculty physicians among the four specialties, with 71.6% (n = 310) earning more than $100,000 in 2008 and classifying as top earners. After controlling for the specialty, institution, and ranking, there was a significant association between the number of publications on salary (P Scopus number of publications and h-index were correlated (P Scopus h-index was of borderline significance in predicting physician salary (P = 0.12). Physicians with higher Scopus publications had higher total salaries across all four specialties. Every 10 publications were associated with a 2.40% increase in total salary after controlling for specialty, institution, rank, and chair. Ophthalmologists, otolaryngologists, neurosurgeons, and neurologists in the UC healthcare system who are more academically productive receive greater remuneration.

  6. Optimizing clinical operations as part of a global emergency medicine initiative in Kumasi, Ghana: application of Lean manufacturing principals to low-resource health systems.

    Science.gov (United States)

    Carter, Patrick M; Desmond, Jeffery S; Akanbobnaab, Christopher; Oteng, Rockefeller A; Rominski, Sarah D; Barsan, William G; Cunningham, Rebecca M

    2012-03-01

    8) despite different levels of resources, root causes of system inefficiencies are often similar across health care systems, but require unique solutions appropriate to the clinical setting. Lean manufacturing techniques can be successfully adapted for use in developing health systems. Lessons learned from this Lean project will aid future introduction of advanced operations management techniques in low- to middle-income countries. © 2012 by the Society for Academic Emergency Medicine.

  7. Using Quality Function Deployment To Improve Academic Advising Processes.

    Science.gov (United States)

    Barrows, Richard; Murray, Bruce

    1997-01-01

    Quality Function Deployment, a set of concepts and tools used in manufacturing engineering to link consumer needs with product design, can also improve academic advising systems and processes. The technique promotes structured, logical examination of students' advising needs and their relationship to advising system design, processes, methods,…

  8. Extensive characterisation of advanced manufacturing solutions for the ITER Central Solenoid pre-compression system

    Energy Technology Data Exchange (ETDEWEB)

    Langeslag, S.A.E., E-mail: stefanie.langeslag@cern.ch [CERN, CH-1211 Genève 23 (Switzerland); Sgobba, S. [CERN, CH-1211 Genève 23 (Switzerland); Libeyre, P. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul lez Durance Cedex (France); Marcinek, D.J. [Cracow University of Technology, Warszawska 24, 30-962 Kraków (Poland); Zhang, Z. [CERN, CH-1211 Genève 23 (Switzerland); EPFL, CH-1015 Lausanne (Switzerland)

    2015-10-15

    The ITER Central Solenoid (CS), positioned in the center of the ITER tokamak, will provide a magnetic field, contributing to the confinement of the plasma. The 13 m high CS consists of a vertical stack of 6 independently driven modules, dynamically activated. Resulting opposing currents can lead to high separation forces. A pre-compression structure is implemented to counteract these opposing forces, by realising a continuous 180 MN coil-to-coil contact loading. Preload is applied by mechanical fastening via 9 subunits, positioned along the coil stack, each consisting of 2 outer and 1 inner tie plate. The tie plates therefore need to feature outstanding mechanical behaviour in a large temperature range. High strength, Nitronic®-50 type F XM-19 austenitic stainless steel is selected as candidate material. The linearised stress distribution reaches approximately 250 MPa, leading to a required yield strength of 380 MPa at room temperature. Two different manufacturing methods are being studied for the procurement of these 15 m long tie plates. A welded solution originates from individual head- and slab-forgings, welded together by Gas Metal Arc Welding (GMAW). In parallel, a single piece forged solution is proven feasible, impressively forged in one piece by applying successive open die forging steps, followed by final machining. Maximum internal stress is experienced during cool-down to 4 K as a result of a large difference in thermal contraction between the support system and the coils. Furthermore, the varying magnetic fields in the independently driven coils introduce cyclic loading. Therefore, assessment of the two manufacturing solutions, in terms of both static and dynamic mechanical behaviour, is performed at ambient as well as cryogenic temperature. An extensive characterisation including microstructural and mechanical examination is conducted, evaluating the comparative performance of both solutions, reporting, amongst others, yield strength reaching the

  9. Case Study on Lean Manufacturing System Implementation in Batch Printing Industry Malaysia

    Directory of Open Access Journals (Sweden)

    Tang Saihong

    2016-01-01

    Full Text Available Lean Manufacturing is a popular tool to be implemented in printing industry fields for the purpose of achieving the successful production goals and it is a well-organized method used to eliminate the waste or non-value added activities. Lean Manufacturing consists of several tools like 5S, TPM, Kanban, Kaizen and others. In this paper, the researcher is focus on TPM (Total Productive Maintenance. TPM is a concept used for maintaining plants and equipment with the involvement of all employees in the company in order to increase the overall equipment effectiveness (OEE. In this paper, the researcher will identify the problem faced in company’s production line and then implement lean tools in order to improve the productivity. Afterward, the researcher will carry out time study on company’s production line. The purpose of time study is to getting the result for OEE and the time taken for producing one piece of product. The researcher is then designed and suggested one-piece flow system to the management with showing the result on simulation that getting improvement in productivity. The result was simulated by using Flexsim and shows that 7.59 seconds was saved in producing one piece of calendar. At the end, the result shows that OEE increase from 34.3% to 60% and the company total save around 6 hours per month by implement one-piece flow. At last, by verifying the distribution of collected data, the researcher will perform Anderson Darling Normality test to ensure the distribution of data are normal.

  10. Unit cell-based computer-aided manufacturing system for tissue engineering

    International Nuclear Information System (INIS)

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-01-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering. (paper)

  11. Design of a continuous emissions monitoring system at a manufacturing facility recycling hazardous waste

    International Nuclear Information System (INIS)

    Harlow, G.; Bartman, C.D.; Renfroe, J.

    1991-01-01

    In March 1988, Marine Shale Processors, Inc. (MSP) initiated a project to incorporate a continuous emissions monitoring system (CEMS) at its manufacturing facility in Amelia, Louisiana, which recycles hazardous material into light-weight, general purpose aggregate. The stimuli for the project were: To quantify stack gas emissions for the purpose of risk assessment; To use the data generated for process control and evaluation purposes; and, MSP's commitment to advance the science of continuous monitoring of stack gas emissions. In order to successfully respond to these goals, MSP sought a system which could monitor combustion products such as NOx, SO 2 , HCl and CO 2 , as well as speciated organic compounds. Several analytical technologies and sampling system designs were reviewed to determine the best fit to satisfy the requirements. A process mass spectrometer and a heated sample extraction subsystem were selected for the project. The purpose of this paper is to review the available analytical technologies for CEMS and sample extraction subsystems and to describe the CEMS now installed at MSP

  12. Unit cell-based computer-aided manufacturing system for tissue engineering.

    Science.gov (United States)

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-03-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

  13. Towards a systemic functional model for comparing forms of discourse in academic writing Towards a systemic functional model for comparing forms of discourse in academic writing

    Directory of Open Access Journals (Sweden)

    Meriel Bloor

    2008-04-01

    Full Text Available This article reports on research into the variation of texts across disciplines and considers the implications of this work for the teaching of writing. The research was motivated by the need to improve students’ academic writing skills in English and the limitations of some current pedagogic advice. The analysis compares Methods sections of research articles across four disciplines, including applied and hard sciences, on a cline, or gradient, termed slow to fast. The analysis considers the characteristics the texts share, but more importantly identifies the variation between sets of linguistic features. Working within a systemic functional framework, the texts are analysed for length, sentence length, lexical density, readability, grammatical metaphor, Thematic choice, as well as various rhetorical functions. Contextually relevant reasons for the differences are considered and the implications of the findings are related to models of text and discourse. Recommendations are made for developing domain models that relate clusters of features to positions on a cline. This article reports on research into the variation of texts across disciplines and considers the implications of this work for the teaching of writing. The research was motivated by the need to improve students’ academic writing skills in English and the limitations of some current pedagogic advice. The analysis compares Methods sections of research articles across four disciplines, including applied and hard sciences, on a cline, or gradient, termed slow to fast. The analysis considers the characteristics the texts share, but more importantly identifies the variation between sets of linguistic features. Working within a systemic functional framework, the texts are analysed for length, sentence length, lexical density, readability, grammatical metaphor, Thematic choice, as well as various rhetorical functions. Contextually relevant reasons for the differences are considered

  14. Perception of performance management system by academic staff in an open distance learning higher education environment

    Directory of Open Access Journals (Sweden)

    Esther M. Maimela

    2016-10-01

    Full Text Available Orientation: Institutions of higher learning in South Africa are fast embracing performance management system (PMS as a mechanism for the achievement of teaching excellence and enhancement of research productivity. However, literature provided evidence to show that application of PMS in the private sector had failed to drive competition, efficiency and productivity. Research purpose: The main purpose of this article was to evaluate the perception of academic staff members of an open distance learning institution regarding the implementation of a PMS. Motivation for the study: PMS as a mechanism through which performance of academics is measured has been described as inconsistent with the long tradition of academic freedom, scholarship and collegiality in the academy. Moreso, previous research on the implementation of PMS was limited to private sector organisations, thus resulting in the dearth of empirical literature relating to its practice in service-driven public sector institutions. Research design, approach and method: The article adopted a quantitative research approach using census survey methodology. Data were collected from 492 academic staff from the surveyed institution using a self-developed questionnaire that was tested for high content validity with a consolidated Cronbach’s alpha value of 0.83. Data were analysed using a onesample t-test because of the one-measurement nature of the variable under investigation. Main findings: Major findings of the study indicated that respondents were satisfied with the implementation of the PMS by management. However, the payment of performance bonuses was not considered as sufficiently motivating, thus necessitating a pragmatic review by management. Practical/managerial implications: The findings of this article provided a practical guide to managers on the implementation and management of PMS as an employee performance reward mechanism in non-profit and service-oriented organisations

  15. Software defined networking firewall for industry 4.0 manufacturing systems

    Directory of Open Access Journals (Sweden)

    Akihiro Tsuchiya

    2018-04-01

    Full Text Available Purpose: In order to leverage automation control data, Industry 4.0 manufacturing systems require industrial devices to be connected to the network. Potentially, this can increase the risk of cyberattacks, which can compromise connected industrial devices to acquire production data or gain control over the production process. Search engines such as Sentient Hyper-Optimized Data Access Network (SHODAN can be perverted by attackers to acquire network information that can be later used for intrusion. To prevent this, cybersecurity standards propose network architectures divided into several networks segments based on system functionalities. In this architecture, Firewalls limit the exposure of industrial control devices in order to minimize security risks. This paper presents a novel Software Defined Networking (SDN Firewall that automatically applies this standard architecture without compromising network flexibility.   Design/methodology/approach: The proposed SDN Firewall changes filtering rules in order to implement the different network segments according to application level access control policies. The Firewall applies two filtering techniques described in this paper: temporal filtering and spatial filtering, so that only applications in a white list can connect to industrial control devices. Network administrators need only to configure this application-oriented white lists to comply with security standards for ICS. This simplifies to a great extent network management tasks. Authors have developed a prototype implementation based on the OPC UA Standard and conducted security tests in order to test the viability of the proposal. Findings: Network segmentation and segregation are effective counter-measures against network scanning attacks. The proposed SDN Firewall effectively configures a flat network into virtual LAN segments according to security standard guidelines. Research limitations/implications: The prototype implementation still

  16. Engineered Barrier System - Manufacturing, Testing and Quality Assurance. Report from a Workshop

    International Nuclear Information System (INIS)

    2004-06-01

    As part of preparations for review of future license applications, the Swedish Nuclear Power Inspectorate (SKI) organised a workshop on the engineered barrier system for the KBS-3 concept, with the focus on manufacturing, testing and quality assurance. The main purpose of the workshop was to identify critical issues in the demonstration of how long-term safety requirements could be fulfilled for the engineered barriers. The workshop included presentations related to engineered barrier manufacturing and testing held by external experts, and working group sessions to prepare questions to the Swedish Nuclear Fuel and Waste Management Co. (SKB). SKB presentations were followed by an informal questioning and discussion with SKB representatives. This report includes a presentation of the questions posed by the working groups, SKB's replies to these questions as well as a summary of the working group discussions. The conclusions and viewpoints presented in this report are those of one or several workshop participants. During the workshop many issues regarding manufacturing, testing and quality assurance of the engineered barriers were discussed. The central themes in the questions and discussions are summarised as follows: There is a need to specify how the functional requirements for the buffer and backfill will be achieved in practise. Issues of particular interest are material selection, compaction density, initial water content and manufacturing methods for bentonite blocks. A major problem that must be addressed is the long period required to obtain relevant results from large-scale testing. The uncertainties relating to the wetting and subsequent swelling processes of the bentonite buffer have implications for analysis of the canister. It is necessary to know now non-uniform the bentonite swelling pressure could be in a worst case pressure differential, in order to evaluate the sufficiency of 'as tested' canister performance. Regarding the copper shell of the

  17. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  18. Modelling and Analysing Deadlock in Flexible Manufacturing System using Timed Petri Net

    Directory of Open Access Journals (Sweden)

    Assem Hatem Taha

    2017-03-01

    Full Text Available Flexible manufacturing system (FMS has several advantages compared to conventional systems such as higher machine utilization, higher efficiency, less inventory, and less production time. On the other hand, FMS is expensive and complicated. One of the main problems that may happen is the deadlock. Deadlock is a case that happens when one operation or more are unable to complete their tasks because of waiting of resources that are used by other processes. This may occur due to inappropriate sharing of the resources or improper resource allocation logic which may lead to deadlock occurrence due to the complexity of assigning shared resources to different tasks in an efficient way. One of the most effective tools to model and detect the deadlocks is the petri net. In this research the Matlab software has been used to detect the deadlock in two parallel lines with one shared machines. The analysis shows that deadlock exists at transition with high utilization and place with high waiting time

  19. Novel fully integrated computer system for custom footwear: from 3D digitization to manufacturing

    Science.gov (United States)

    Houle, Pascal-Simon; Beaulieu, Eric; Liu, Zhaoheng

    1998-03-01

    This paper presents a recently developed custom footwear system, which integrates 3D digitization technology, range image fusion techniques, a 3D graphical environment for corrective actions, parametric curved surface representation and computer numerical control (CNC) machining. In this system, a support designed with the help of biomechanics experts can stabilize the foot in a correct and neutral position. The foot surface is then captured by a 3D camera using active ranging techniques. A software using a library of documented foot pathologies suggests corrective actions on the orthosis. Three kinds of deformations can be achieved. The first method uses previously scanned pad surfaces by our 3D scanner, which can be easily mapped onto the foot surface to locally modify the surface shape. The second kind of deformation is construction of B-Spline surfaces by manipulating control points and modifying knot vectors in a 3D graphical environment to build desired deformation. The last one is a manual electronic 3D pen, which may be of different shapes and sizes, and has an adjustable 'pressure' information. All applied deformations should respect a G1 surface continuity, which ensure that the surface can accustom a foot. Once the surface modification process is completed, the resulting data is sent to manufacturing software for CNC machining.

  20. Legionella Persistence in Manufactured Water Systems: Pasteurization Potentially Selecting for Thermal Tolerance

    Directory of Open Access Journals (Sweden)

    Harriet Whiley

    2017-07-01

    Full Text Available Legionella is an opportunistic waterborne pathogen of increasing public health significance. Pasteurization, otherwise known as super-heat and flush (increasing water temperature to above 70°C and flushing all outlets, has been identified as an important mechanism for the disinfection of Legionella in manufactured water systems. However, several studies have reported that this procedure was ineffective at remediating water distribution systems as Legionella was able to maintain long term persistent contamination. Up to 25% of L. pneumophila cells survived heat treatment of 70°C, but all of these were in a viable but non-culturable state. This demonstrates the limitations of the culture method of Legionella detection currently used to evaluate disinfection protocols. In addition, it has been demonstrated that pasteurization and nutrient starvation can select for thermal tolerant strains, where L. pneumophila was consistently identified as having greater thermal tolerance compared to other Legionella species. This review demonstrates that further research is needed to investigate the effectiveness of pasteurization as a disinfection method. In particular, it focuses on the potential for pasteurization to select for thermal tolerant L. pneumophila strains which, as the primary causative agent of Legionnaires disease, have greater public health significance compared to other Legionella species.

  1. Solar PV Manufacturing Cost Model Group: Installed Solar PV System Prices (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Goodrich, A. C.; Woodhouse, M.; James, T.

    2011-02-01

    EERE's Solar Energy Technologies Program is charged with leading the Secretary's SunShot Initiative to reduce the cost of electricity from solar by 75% to be cost competitive with conventional energy sources without subsidy by the end of the decade. As part of this Initiative, the program has funded the National Renewable Energy Laboratory (NREL) to develop module manufacturing and solar PV system installation cost models to ensure that the program's cost reduction targets are carefully aligned with current and near term industry costs. The NREL cost analysis team has leveraged the laboratories' extensive experience in the areas of project finance and deployment, as well as industry partnerships, to develop cost models that mirror the project cost analysis tools used by project managers at leading U.S. installers. The cost models are constructed through a "bottoms-up" assessment of each major cost element, beginning with the system's bill of materials, labor requirements (type and hours) by component, site-specific charges, and soft costs. In addition to the relevant engineering, procurement, and construction costs, the models also consider all relevant costs to an installer, including labor burdens and overhead rates, supply chain costs, and overhead and materials inventory costs, and assume market-specific profits.

  2. The commissioning and acceptance of a commercially manufactured radiotherapy beam tissue compensating filter system

    International Nuclear Information System (INIS)

    Sorell, M.J.; Sorell, G.C.; Nicholls, R.L.

    1990-01-01

    The principles of tissue compensation in radiotherapy and the methods for their implementation on the GE RT/Plan computer are briefly described. The HEK Medizintechnik GmbH Medical Systems Tissue Compensator cutting device is also described, along with the tesing procedure adopted for its commissioning and quality assurance testing of the total system. The HEK machine hardware proved to be well engineered, but there were many deficiencies in the software supplied to interface it to the planning computer. Most errors were fatal to the program producing a compensator but a number of errors allowed the cutter to manufacture shapes which on close inspection turned out to be incorrect. These faults were traced to incorrect algorithms and/or incorrect software implementation. It is stressed that the software errors were entirely the responsibility of HEK and that the GE equipment and software were not deficient in any way. However, the experiences of the Adelaide group suggest that caution should be exercised when purchasing two pieces of interacting equipment from separate suppliers. 2 refs., 1 tab., 4 figs

  3. A Perspective on Smart Process Manufacturing Research Challenges for Process Systems Engineers

    Directory of Open Access Journals (Sweden)

    Ian David Lockhart Bogle

    2017-04-01

    Full Text Available The challenges posed by smart manufacturing for the process industries and for process systems engineering (PSE researchers are discussed in this article. Much progress has been made in achieving plant- and site-wide optimization, but benchmarking would give greater confidence. Technical challenges confronting process systems engineers in developing enabling tools and techniques are discussed regarding flexibility and uncertainty, responsiveness and agility, robustness and security, the prediction of mixture properties and function, and new modeling and mathematics paradigms. Exploiting intelligence from big data to drive agility will require tackling new challenges, such as how to ensure the consistency and confidentiality of data through long and complex supply chains. Modeling challenges also exist, and involve ensuring that all key aspects are properly modeled, particularly where health, safety, and environmental concerns require accurate predictions of small but critical amounts at specific locations. Environmental concerns will require us to keep a closer track on all molecular species so that they are optimally used to create sustainable solutions. Disruptive business models may result, particularly from new personalized products, but that is difficult to predict.

  4. Modeling of RFID-Enabled Real-Time Manufacturing Execution System in Mixed-Model Assembly Lines

    Directory of Open Access Journals (Sweden)

    Zhixin Yang

    2015-01-01

    Full Text Available To quickly respond to the diverse product demands, mixed-model assembly lines are well adopted in discrete manufacturing industries. Besides the complexity in material distribution, mixed-model assembly involves a variety of components, different process plans and fast production changes, which greatly increase the difficulty for agile production management. Aiming at breaking through the bottlenecks in existing production management, a novel RFID-enabled manufacturing execution system (MES, which is featured with real-time and wireless information interaction capability, is proposed to identify various manufacturing objects including WIPs, tools, and operators, etc., and to trace their movements throughout the production processes. However, being subject to the constraints in terms of safety stock, machine assignment, setup, and scheduling requirements, the optimization of RFID-enabled MES model for production planning and scheduling issues is a NP-hard problem. A new heuristical generalized Lagrangian decomposition approach has been proposed for model optimization, which decomposes the model into three subproblems: computation of optimal configuration of RFID senor networks, optimization of production planning subjected to machine setup cost and safety stock constraints, and optimization of scheduling for minimized overtime. RFID signal processing methods that could solve unreliable, redundant, and missing tag events are also described in detail. The model validity is discussed through algorithm analysis and verified through numerical simulation. The proposed design scheme has important reference value for the applications of RFID in multiple manufacturing fields, and also lays a vital research foundation to leverage digital and networked manufacturing system towards intelligence.

  5. The comparison of the use of holonic and agent-based methods in modelling of manufacturing systems

    Science.gov (United States)

    Foit, K.; Banaś, W.; Gwiazda, A.; Hryniewicz, P.

    2017-08-01

    The rapid evolution in the field of industrial automation and manufacturing is often called the 4th Industry Revolution. Worldwide availability of the internet access contributes to the competition between manufacturers, gives the opportunity for buying materials, parts and for creating the partnership networks, like cloud manufacturing, grid manufacturing (MGrid), virtual enterprises etc. The effect of the industry evolution is the need to search for new solutions in the field of manufacturing systems modelling and simulation. During the last decade researchers have developed the agent-based approach of modelling. This methodology have been taken from the computer science, but was adapted to the philosophy of industrial automation and robotization. The operation of the agent-based system depends on the simultaneous acting of different agents that may have different roles. On the other hand, there is the holon-based approach that uses the structures created by holons. It differs from the agent-based structure in some aspects, while the other ones are quite similar in both methodologies. The aim of this paper is to present the both methodologies and discuss the similarities and the differences. This may could help to select the optimal method of modelling, according to the considered problem and software resources.

  6. The Impact of the Availability of Resources, the Allocation of Buffers and Number of Workers on the Effectiveness of an Assembly Manufacturing System

    OpenAIRE

    Kłos Sławomir; Trebuna Peter

    2017-01-01

    This paper proposes the application of computer simulation methods in order to analyse the availability of resources, buffers and the impact of the allocation of workers on the throughput and work-in-progress of a manufacturing system. The simulation model of the production system is based on an existing example of a manufacturing company in the automotive industry. The manufacturing system includes both machining and assembly operations. Simulation experiments were conducted vis-à-vis the av...

  7. PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

    Directory of Open Access Journals (Sweden)

    Slamet Budiarto

    2015-12-01

    Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

  8. PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

    Directory of Open Access Journals (Sweden)

    Slamet Budiarto

    2011-12-01

    Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

  9. AFFORDABLE MULTI-LAYER CERAMIC (MLC) MANUFACTURING FOR POWER SYSTEMS (AMPS)

    Energy Technology Data Exchange (ETDEWEB)

    E.A. Barringer, Ph.D.

    2002-11-27

    McDermott Technology, Inc. (MTI) is attempting to develop high-performance, cost-competitive solid oxide fuel cell (SOFC) power systems. Recognizing the challenges and limitations facing the development of SOFC stacks comprised of electrode-supported cells and metallic interconnects, McDermott Technology, Inc. (MTI) has chosen to pursue an alternate path to commercialization. MTI is developing a multi-layer, co-fired, planar SOFC stack that will provide superior performance and reliability at reduced costs relative to competing designs. The MTI approach combines state-of-the-art SOFC materials with the manufacturing technology and infrastructure established for multi-layer ceramic (MLC) packages for the microelectronics industry. The rationale for using MLC packaging technology is that high quality, low-cost manufacturing has been demonstrated at high volumes. With the proper selection of SOFC materials, implementation of MLC fabrication methods offers unique designs for stacks (cells and interconnects) that are not possible through traditional fabrication methods. The MTI approach eliminates use of metal interconnects and ceramic-metal seals, which are primary sources of stack performance degradation. Co-fired cells are less susceptible to thermal cycling stresses by using material compositions that have closely matched coefficients of thermal expansion between the cell and the interconnect. The development of this SOFC stack technology was initiated in October 1999 under the DOE cosponsored program entitled ''Affordable Multi-layer Ceramic Manufacturing for Power Systems (AMPS)''. The AMPS Program was conducted as a two-phase program: Phase I--Feasibility Assessment (10/99--9/00); and Phase II--Process Development for Co-fired Stacks (10/00-3/02). This report provides a summary of the results from Phase I and a more detailed review of the results for Phase II. Phase I demonstrated the feasibility for fabricating multi-layer, co-fired cells and

  10. Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

    Science.gov (United States)

    Nee, John G.; Kare, Audhut P.

    1987-01-01

    Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

  11. Governing Academic Medical Center Systems: Evaluating and Choosing Among Alternative Governance Approaches.

    Science.gov (United States)

    Chari, Ramya; O'Hanlon, Claire; Chen, Peggy; Leuschner, Kristin; Nelson, Christopher

    2018-02-01

    The ability of academic medical centers (AMCs) to fulfill their triple mission of patient care, medical education, and research is increasingly being threatened by rising financial pressures and resource constraints. Many AMCs are, therefore, looking to expand into academic medical systems, increasing their scale through consolidation or affiliation with other health care systems. As clinical operations grow, though, the need for effective governance becomes even more critical to ensure that the business of patient care does not compromise the rest of the triple mission. Multi-AMC systems, a model in which multiple AMCs are governed by a single body, pose a particular challenge in balancing unity with the needs of component AMCs, and therefore offer lessons for designing AMC governance approaches. This article describes the development and application of a set of criteria to evaluate governance options for one multi-AMC system-the University of California (UC) and its five AMCs. Based on a literature review and key informant interviews, the authors identified criteria for evaluating governance approaches (structures and processes), assessed current governance approaches using the criteria, identified alternative governance options, and assessed each option using the identified criteria. The assessment aided UC in streamlining governance operations to enhance their ability to respond efficiently to change and to act collectively. Although designed for UC and a multi-AMC model, the criteria may provide a systematic way for any AMC to assess the strengths and weaknesses of its governance approaches.

  12. A model for the design of computer integrated manufacturing systems: Identification of information requirements of decision makers

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1990-01-01

    A predominant interest in recent design research has been the development of a general model of the design process to formulate a framework within which support systems based on modern information technology can be developed. Similarly, for manufacturing systems, advanced information systems...... and compatibility of data bases. It is, however, a question whether traditional models of work process or task procedures are suited for design of advanced information systems such as integrated manufacturing systems. Modern technology and the rapid succession of designs, materials and processes require flexible...... are developed to support production planning and control processes as they are found in the present organizations. In this case, the result has been the evolution of "islands of automation" and in the CIM literature, integration is widely discussed in terms of standardization of communication protocols...

  13. Computer-assisted design/computer-assisted manufacturing systems: A revolution in restorative dentistry

    Directory of Open Access Journals (Sweden)

    Arbaz Sajjad

    2016-01-01

    Full Text Available For the better part of the past 20 years, dentistry has seen the development of many new all-ceramic materials and restorative techniques fueled by the desire to capture the ever elusive esthetic perfection. This has resulted in the fusion of the latest in material science and the pen ultimate in computer-assisted design/computer-assisted manufacturing (CAD/CAM technology. This case report describes the procedure for restoring the esthetic appearance of both the left and right maxillary peg-shaped lateral incisors with a metal-free sintered finely structured feldspar ceramic material using the latest laboratory CAD/CAM system. The use of CAD/CAM technology makes it possible to produce restorations faster with precision- fit and good esthetics overcoming the errors associated with traditional ceramo-metal technology. The incorporation of this treatment modality would mean that the dentist working procedures will have to be adapted in the methods of CAD/CAM technology.

  14. Dynamic Pricing in Cloud Manufacturing Systems under Combined Effects of Consumer Structure, Negotiation, and Demand

    Directory of Open Access Journals (Sweden)

    Wei Peng

    2017-01-01

    Full Text Available In this study, we proposed a game-theory based framework to model the dynamic pricing process in the cloud manufacturing (CMfg system. We considered a service provider (SP, a broker agent (BA, and a dynamic service demander (SD population that is composed of price takers and bargainers in this study. The pricing processes under linear demand and constant elasticity demand were modeled, respectively. The combined effects of SD population structure, negotiation, and demand forms on the SP’s and the BA’s equilibrium prices and expected revenues were examined. We found that the SP’s optimal wholesale price, the BA’s optimal reservation price, and posted price all increase with the proportion of price takers under linear demand but decrease with it under constant elasticity demand. We also found that the BA’s optimal reservation price increases with bargainers’ power no matter under what kind of demand. Through analyzing the participants’ revenues, we showed that a dynamic SD population with a high ratio of price takers would benefit the SP and the BA.

  15. Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

    International Nuclear Information System (INIS)

    Chu, S.Y.; Hwang, Y.J.; Choi, S.; Na, J.B.; Kim, Y.J.; Chang, K.S.; Bae, D.K.; Lee, C.Y.; Ko, T.K.

    2011-01-01

    A high speed electromagnetic suspension (EMS) maglev has emerged as the solution to speed limit problem that conventional high-speed railroad has. In the EMS maglev, small levitation gap needs uniform guide-way which leads to increase the construction cost. The large levitation gap can reduce the construction cost. However it is hard for normal conducting electromagnet to produce larger magneto-motive force (MMF) for generating levitation force as increased levitation gap. This is because normal conductors have limited rating current to their specific volume. Therefore, the superconducting electromagnet can be one of the solutions for producing both large levitation gap and sufficient MMF. The superconducting electromagnets have incomparably high allowable current density than what normal conductors have. In this paper, the prototype of high temperature superconducting (HTS) electromagnets were designed and manufactured applicable to hybrid electromagnetic suspension system (H-EMS). The H-EMS consists of control coils for levitation control and superconducting coils for producing MMF for levitation. The required MMF for generating given levitation force was calculated by both equations of ideal U-core magnet and magnetic field analysis using the finite element method (FEM). The HTS electromagnets were designed as double pancakes with Bi-2223/Ag tapes. Experiments to confirm its operating performance were performed in liquid nitrogen (LN 2 ).

  16. Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

    Science.gov (United States)

    Chu, S. Y.; Hwang, Y. J.; Choi, S.; Na, J. B.; Kim, Y. J.; Chang, K. S.; Bae, D. K.; Lee, C. Y.; Ko, T. K.

    2011-11-01

    A high speed electromagnetic suspension (EMS) maglev has emerged as the solution to speed limit problem that conventional high-speed railroad has. In the EMS maglev, small levitation gap needs uniform guide-way which leads to increase the construction cost. The large levitation gap can reduce the construction cost. However it is hard for normal conducting electromagnet to produce larger magneto-motive force (MMF) for generating levitation force as increased levitation gap. This is because normal conductors have limited rating current to their specific volume. Therefore, the superconducting electromagnet can be one of the solutions for producing both large levitation gap and sufficient MMF. The superconducting electromagnets have incomparably high allowable current density than what normal conductors have. In this paper, the prototype of high temperature superconducting (HTS) electromagnets were designed and manufactured applicable to hybrid electromagnetic suspension system (H-EMS). The H-EMS consists of control coils for levitation control and superconducting coils for producing MMF for levitation. The required MMF for generating given levitation force was calculated by both equations of ideal U-core magnet and magnetic field analysis using the finite element method (FEM). The HTS electromagnets were designed as double pancakes with Bi-2223/Ag tapes. Experiments to confirm its operating performance were performed in liquid nitrogen (LN2).

  17. Life cycle assessment of façade coating systems containing manufactured nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Hischier, Roland, E-mail: roland.hischier@empa.ch; Nowack, Bernd [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland); Gottschalk, Fadri [ETSS (Switzerland); Hincapie, Ingrid [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland); Steinfeldt, Michael [University of Bremen FB 4/FG 10 Technological Design and Development (Germany); Som, Claudia [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland)

    2015-02-15

    Nanotechnologies are expected to hold considerable potential for the development of new materials in the construction sector. Up to now the environmental benefits and risks of products containing manufactured nanomaterials (MNM) have been quantified only to a limited extent. This study aims to assess the potential environmental, health and safety impacts of coatings containing MNM using Life-cycle assessment: Do paints containing MNM result in a better environmental performance than paints not containing MNM? The study shows that the results depend on a number of factors: (i) The MNM have to substitute an (active) ingredient of the initial paint composition and not simply be an additional ingredient. (ii) The new composition has to extend the lifetime of the paint for such a time period that the consumption of paint along the life cycle of a building is reduced. (iii) Releases of MNM have to be reduced to the lowest level possible (in particular by dumping unused paint together with the packaging). Only when all these boundary conditions are fulfilled, which is the case only for one of the three paint systems examined, is an improved environmental performance of the MNM-containing paint possible for the paint compositions examined in this study.

  18. Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

    Energy Technology Data Exchange (ETDEWEB)

    Chu, S.Y.; Hwang, Y.J.; Choi, S.; Na, J.B.; Kim, Y.J.; Chang, K.S. [School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Bae, D.K. [Chungju National University, Chungju 380-702 (Korea, Republic of); Lee, C.Y. [Ultra High-Speed Train Research Department, Korea Railroad Research Institute, Uiwang-Si 437-757 (Korea, Republic of); Ko, T.K., E-mail: tkko@yonsei.ac.kr [School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of)

    2011-11-15

    A high speed electromagnetic suspension (EMS) maglev has emerged as the solution to speed limit problem that conventional high-speed railroad has. In the EMS maglev, small levitation gap needs uniform guide-way which leads to increase the construction cost. The large levitation gap can reduce the construction cost. However it is hard for normal conducting electromagnet to produce larger magneto-motive force (MMF) for generating levitation force as increased levitation gap. This is because normal conductors have limited rating current to their specific volume. Therefore, the superconducting electromagnet can be one of the solutions for producing both large levitation gap and sufficient MMF. The superconducting electromagnets have incomparably high allowable current density than what normal conductors have. In this paper, the prototype of high temperature superconducting (HTS) electromagnets were designed and manufactured applicable to hybrid electromagnetic suspension system (H-EMS). The H-EMS consists of control coils for levitation control and superconducting coils for producing MMF for levitation. The required MMF for generating given levitation force was calculated by both equations of ideal U-core magnet and magnetic field analysis using the finite element method (FEM). The HTS electromagnets were designed as double pancakes with Bi-2223/Ag tapes. Experiments to confirm its operating performance were performed in liquid nitrogen (LN{sub 2}).

  19. Manufacturing processes in the textile industry. Expert Systems for fabrics production

    Directory of Open Access Journals (Sweden)

    Juan BULLON

    2017-03-01

    Full Text Available The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities present different subdivisions, each with its own traits. The length of the textile process and the variety of its technical processes lead to the coexistence of different sub-sectors in regards to their business structure and integration. The textile industry is developing expert systems applications to increase production, improve quality and reduce costs. The analysis of textile designs or structures includes the use of mathematical models to simulate the behavior of the textile structures (yarns, fabrics and knitting. The Finite Element Method (FEM has largely facilitated the prediction of the behavior of that textile structure under mechanical loads. For classification problems Artificial Neural Networks (ANNs haveproved to be a very effective tool as a quick and accurate solution. The Case-Based Reasoning (CBR method proposed in this study complements the results of the finite element simulation, mathematical modeling and neural networks methods.

  20. Summary of Research 1997, Interdisciplinary Academic Groups

    National Research Council Canada - National Science Library

    Boger, Dan

    1999-01-01

    This report contains information of research projects in the interdisciplinary groups, Command, Control, and Communications Academic Group, Information Warfare Academic Group, Space Systems Academic...

  1. Closed-Loop Supply Chain Planning Model for a Photovoltaic System Manufacturer with Internal and External Recycling

    Directory of Open Access Journals (Sweden)

    Songi Kim

    2016-06-01

    Full Text Available The photovoltaic (PV generation system has been widely used since the late 1990s. Considering its lifespan of 20 to 30 years, many end-of-life systems will emerge in the near future. This is why recycling PV systems will be beneficial (and may even be detrimental to both the environment and the economy. Through the recycling process, hazardous by-product substances such as cadmium and lead can be treated properly. Moreover, valuable materials including indium, gallium, and tellurium can be extracted and reused for manufacturing purposes. Even though many studies have dealt with issues related to the PV system and its recycling policy, they lack significant factors regarding the recycling policy. This study analyzes and compares three real cases of manufacturer’s recycling policy, including Deutsche Solar, First Solar, and PV Cycle, from the perspective of a closed-loop supply chain. Two mathematical models are developed to help PV system manufacturers establish supply chain planning and choose suitable recycling policies in consideration of different circumstances. Furthermore, an experimental example of these models will be used to validate and conclude the significance of the models. The results from this study will show that recycling CdTe PV systems is much more efficient than recycling c-Si PV systems and that, in the case of c-Si, it is better to outsource recycling end-of-life systems and dispose of all manufacturing scrap.

  2. Social manufacturing

    OpenAIRE

    Hamalainen, Markko; Karjalainen, Jesse

    2017-01-01

    New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

  3. 76 FR 74753 - Authority To Manufacture and Distribute Postage Evidencing Systems

    Science.gov (United States)

    2011-12-01

    ...) provided to customers by manufacturers or distributors. The proposed changes are intended to clarify the... (202) 268-7613. SUPPLEMENTARY INFORMATION: The office formerly known as Postage Technology Management... the business relationship, distribution, control, storage, maintenance, repair, replacement, and...

  4. Extraterrestrial processing and manufacturing of large space systems, volume 1, chapters 1-6

    Science.gov (United States)

    Miller, R. H.; Smith, D. B. S.

    1979-01-01

    Space program scenarios for production of large space structures from lunar materials are defined. The concept of the space manufacturing facility (SMF) is presented. The manufacturing processes and equipment for the SMF are defined and the conceptual layouts are described for the production of solar cells and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, and converters. A 'reference' SMF was designed and its operation requirements are described.

  5. Analysis of Alternative Rework Strategies for Printed Wiring Assembly Manufacturing Systems

    OpenAIRE

    Driels, Morris; Klegka, John S.

    1991-01-01

    This paper presents a model for predicting the cost of test, diagnosis, and rework activities in the manufacture of printed wiring assemblies (PWA's). Rework is defined as all actions taken to correct or improve the basic assembly process. These actions may include those of inspectors and solder touchup technicians who do not add value to the PWA, but whose actions are required in order to produce acceptable yields from the manufacturing process. Two alternative rework strategies for cont...

  6. ACADEMIC ADVICE FOR ONLINE TEACHING AND LEARNING SPANISH. EXPERIENCE THE EDUCATION SYSTEM VALLADOLID

    Directory of Open Access Journals (Sweden)

    Jesús Javier Vizcarra-Brito

    2016-07-01

    Full Text Available Distance education is a novel way to amass knowledge and raise levels of student learning. In this sense academic counseling online is a valuable method of teaching and distance learning. This article describes the scientific foundations, objectives, features and some of the main impacts of the program Online Guidance developed by the Valladolid education system, which is designed and implemented in various subjects are presented; in this case, the experience gained with the subject of Spanish at the elementary level is presented.

  7. Academic Cloning.

    Science.gov (United States)

    Sikula, John P.; Sikula, Andrew F.

    1980-01-01

    The authors define "cloning" as an integral feature of all educational systems, citing teaching practices which reward students for closely reproducing the teacher's thoughts and/or behaviors and administrative systems which tend to promote like-minded subordinates. They insist, however, that "academic cloning" is not a totally…

  8. Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems.

    Science.gov (United States)

    Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

    2016-01-05

    This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees' psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees' performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees' psychological characteristics and either direct or indirect effects on the employees' performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees' performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems' performance by enhancing their macroergonomic compatibility and quality of life at work of the employees.

  9. Association between academic performance and cognitive dysfunction in patients with juvenile systemic lupus erythematosus

    Directory of Open Access Journals (Sweden)

    Renan Bazuco Frittoli

    2016-06-01

    Full Text Available Abstract Objective To determine whether there is an association between the profile of cognitive dysfunction and academic outcomes in patients with juvenile systemic lupus erythematosus (JSLE. Methods Patients aged ≤18 years at the onset of the disease and education level at or above the fifth grade of elementary school were selected. Cognitive evaluation was performed according to the American College of Rheumatology (ACR recommendations. Symptoms of anxiety and depression were assessed by Beck scales; disease activity was assessed by Systemic Lupus Erythematosus Disease Activity Index (SLEDAI; and cumulative damage was assessed by Systemic Lupus International Collaborating Clinics (SLICC. The presence of autoantibodies and medication use were also assessed. A significance level of 5% (p < 0.05 was adopted. Results 41 patients with a mean age of 14.5 ± 2.84 years were included. Cognitive dysfunction was noted in 17 (41.46% patients. There was a significant worsening in mathematical performance in patients with cognitive dysfunction (p = 0.039. Anxiety symptoms were observed in 8 patients (19.51% and were associated with visual perception (p = 0.037 and symptoms of depression were observed in 1 patient (2.43%. Conclusion Patients with JSLE concomitantly with cognitive dysfunction showed worse academic performance in mathematics compared to patients without cognitive impairment.

  10. Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing

    Science.gov (United States)

    Ragil Suryoputro, Muhammad; Sugarindra, Muchamad; Erfaisalsyah, Hendy

    2017-06-01

    In order to produce better products and mitigate defect in products, every company must implement a quality control system. Company will find means to implement a quality control system that is capable and reliable. One of the methods is using the simple implementation of the seven tools in quality control defects. The case studied in this research was the level of disability xyz grey fabric on a shuttle loom 2 on the Batik manufacturing company. The seven tools that include: flowchart, check sheet, histogram, scatter diagram combined with control charts, Pareto diagrams and fishbone diagrams (causal diagram). Check sheet results obtained types of defects in the grey fabric was woven xyz is warp, double warp, the warp break, double warp, empty warp, warp tenuous, ugly edges, thick warp, and rust. Based on the analysis of control chart indicates that the process is out of control. This can be seen in the graph control where there is still a lot of outlier data. Based on a scatter diagram shows a positive correlation between the percentage of disability and the number of production. Based on Pareto diagram, repair needs priority is for the dominant type of defect is warp (44%) and based on double warp value histogram is also the highest with a value of 23635.11 m. In addition, based on the analysis of the factors causing defect by fishbone diagram double warp or other types of defects originating from the materials, methods, machines, measurements, man and environment. Thus the company can take to minimize the prevention and repair of defects and improve product quality.

  11. Silicon-Film(TM) Solar Cells by a Flexible Manufacturing System: Final Report, 16 April 1998 -- 31 March 2001

    Energy Technology Data Exchange (ETDEWEB)

    Rand, J.

    2002-02-01

    This report describes the overall goal to engineer and develop flexible manufacturing methods and equipment to process Silicon-Film solar cells and modules. Three major thrusts of this three-year effort were to: develop a new larger-area (208 mm x 208 mm) Silicon-Film solar cell, the APx-8; construct and operate a new high-throughput wafer-making system; and develop a 15-MW single-thread manufacturing process. Specific technical accomplishments from this period are: Increase solar cell area by 80%, increase the generation capacity of a Silicon-Film wafer-making system by 350%, use a new in-line HF etch system in solar cell production, design and develop an in-line NaOH etch system, eliminate cassettes in solar cell processing, and design a new family of module products.

  12. A Promising IFN-Deficient System to Manufacture IFN-Sensitive Influenza Vaccine Virus.

    Science.gov (United States)

    Chen, Can; Fan, Wenhui; Li, Jing; Zheng, Weinan; Zhang, Shuang; Yang, Limin; Liu, Di; Liu, Wenjun; Sun, Lei

    2018-01-01

    Interferon (IFN)-sensitive and replication-incompetent influenza viruses are likely to be the alternatives to inactivated and attenuated virus vaccines. Some IFN-sensitive influenza vaccine candidates with modified non-structural protein 1 (NS1) are highly attenuated in IFN-competent hosts but induce robust antiviral immune responses. However, little research has been done on the manufacturability of these IFN-sensitive vaccine viruses. Here, RIG-I-knockout 293T cells were used to package the IFN-sensitive influenza A/WSN/33 (H1N1) virus expressing the mutant NS1 R38A/K41A. We found that the packaging efficiency of the NS1 R38A/K41A virus in RIG-I-knockout 293T cells was much higher than that in 293T cells. Moreover, the NS1 R38A/K41A virus almost lost its IFN antagonist activity and could no longer replicate in A549, MDCK, and Vero cells after 3-6 passages. This indicated that the replication of NS1 R38A/K41A virus is limited in conventional cells. Therefore, we further established a stable Vero cell line expressing the wild-type (WT) NS1 of the WSN virus, based on the Tet-On 3G system. The NS1 R38A/K41A virus was able to steadily propagate in this IFN-deficient cell line for at least 20 passages. In a mouse model, the NS1 R38A/K41A virus showed more than a 4-log reduction in lung virus titers compared to the WT virus at 3 and 5 days post infection. Furthermore, we observed that the NS1 R38A/K41A virus triggered high-level of IFN-α/β production in lung tissues and was eliminated from the host in a relatively short period of time. Additionally, this virus induced high-titer neutralizing antibodies against the WT WSN, A/Puerto Rico/8/1934 (PR8), or A/California/04/2009 (CA04) viruses and provided 100% protection against the WT WSN virus. Thus, we found that the replication of the NS1 R38A/K41A virus was limited in IFN-competent cells and mice. We also presented a promising IFN-deficient system, involving a RIG-I-knockout 293T cell line to package the IFN

  13. Thermodynamics of the hydrogen-carbon-oxygen-tungsten system, as applied to the manufacture of tungsten and tungsten carbide

    International Nuclear Information System (INIS)

    Schwenke, G.K.

    2001-01-01

    The thermodynamics of the quaternary hydrogen-carbon oxygen-tungsten system and its binary and ternary sub-systems are reviewed. Published thermodynamic data are evaluated, and expression for free energies of formation are chosen. These expressions are integrated with and equilibrium-calculating algorithm, producing a powerful tool for understanding and improving the manufacture of tungsten and tungsten carbide. Three examples are presented: reduction/carburization of tungstic oxide with hydrogen, carbon, and methane. (author)

  14. Systems of Career Influences: A Conceptual Model for Evaluating the Professional Development of Women in Academic Medicine

    Science.gov (United States)

    Helitzer, Deborah; Morahan, Page; Chang, Shine; Gleason, Katharine; Cardinali, Gina; Wu, Chih-Chieh

    2012-01-01

    Abstract Background Surprisingly little research is available to explain the well-documented organizational and societal influences on persistent inequities in advancement of women faculty. Methods The Systems of Career Influences Model is a framework for exploring factors influencing women's progression to advanced academic rank, executive positions, and informal leadership roles in academic medicine. The model situates faculty as agents within a complex adaptive system consisting of a trajectory of career advancement with opportunities for formal professional development programming; a dynamic system of influences of organizational policies, practices, and culture; and a dynamic system of individual choices and decisions. These systems of influence may promote or inhibit career advancement. Within this system, women weigh competing influences to make career advancement decisions, and leaders of academic health centers prioritize limited resources to support the school's mission. Results and Conclusions The Systems of Career Influences Model proved useful to identify key research questions. We used the model to probe how research in academic career development might be applied to content and methods of formal professional development programs. We generated a series of questions and hypotheses about how professional development programs might influence professional development of health science faculty members. Using the model as a guide, we developed a study using a quantitative and qualitative design. These analyses should provide insight into what works in recruiting and supporting productive men and women faculty in academic medical centers. PMID:23101486

  15. Systems of career influences: a conceptual model for evaluating the professional development of women in academic medicine.

    Science.gov (United States)

    Magrane, Diane; Helitzer, Deborah; Morahan, Page; Chang, Shine; Gleason, Katharine; Cardinali, Gina; Wu, Chih-Chieh

    2012-12-01

    Surprisingly little research is available to explain the well-documented organizational and societal influences on persistent inequities in advancement of women faculty. The Systems of Career Influences Model is a framework for exploring factors influencing women's progression to advanced academic rank, executive positions, and informal leadership roles in academic medicine. The model situates faculty as agents within a complex adaptive system consisting of a trajectory of career advancement with opportunities for formal professional development programming; a dynamic system of influences of organizational policies, practices, and culture; and a dynamic system of individual choices and decisions. These systems of influence may promote or inhibit career advancement. Within this system, women weigh competing influences to make career advancement decisions, and leaders of academic health centers prioritize limited resources to support the school's mission. The Systems of Career Influences Model proved useful to identify key research questions. We used the model to probe how research in academic career development might be applied to content and methods of formal professional development programs. We generated a series of questions and hypotheses about how professional development programs might influence professional development of health science faculty members. Using the model as a guide, we developed a study using a quantitative and qualitative design. These analyses should provide insight into what works in recruiting and supporting productive men and women faculty in academic medical centers.

  16. Academic Information System Support in the Era of Education 3.0

    Science.gov (United States)

    Utomo, HP; Bon, AT; Hendayun, M.

    2017-08-01

    The emergence of Education 3.0 as a new paradigm in education has been spread widely in many educational institutions, especially in higher education institutions (HEIs). Many of them have been implementing the new paradigm and get benefit from it. But somehow, the implementation caused some problems. The new policy and procedures are causing administrative problems, especially in the academic affair. The implementation also needs to provide external involvement. To overcome the problems, the academic information system (AIS) can be used to support the characteristics of Education 3.0. The purpose of the research is to find the possibility support from the AIS to the characteristics of Education 3.0. The research used Education 3.0 concept and information system (IS) concept to find the possibility. The research used a case study as the method and conducted a qualitative research with an unstructured interview. After comparing the Education 3.0 concept and IS concept with the interview analysis, the research found that all the characteristics of Education 3.0 can possibly support by the AIS. The result can be used as a guideline to develop the new AIS with the capability to support the characteristics of Education 3.0.

  17. The Multibeam Advisory Committee (MAC): a search for solutions for collecting consistent high quality multibeam data across multiple ships, systems, and operators in the U.S. Academic Fleet.

    Science.gov (United States)

    Johnson, P. D.; Ferrini, V. L.; Jerram, K.

    2016-12-01

    In 2015 the National Science Foundation funded the University of New Hampshire's Center for Coastal and Ocean Mapping and Lamont-Doherty Earth Observatory, for the second time, to coordinate the effort of standardizing the quality of multibeam echosounder (MBES) data across the U.S. academic fleet. This effort supports 9 different ship operating institutions who manage a total of 12 multibeam-equipped ships carrying 6 different MBES systems, manufactured by two different companies. These MBES are designed to operate over a very wide range of depths and operational modes. The complexity of this endeavor led to the creation of the Multibeam Advisory Committee (MAC), a team of academic and industry experts whose mission is to support the needs of the U.S academic fleet's multibeam echo sounders through all of the phases of the "life" of a MBES system and its data, from initial acceptance of the system, to recommendations on at-sea acquisition of data, to validation of already installed systems, and finally to the post-survey data evaluation. The main activities of the MAC include 1.) standardizing both the Shipboard Acceptance Testing of all new systems and Quality Assurance Testing of already installed systems, 2.) working with the both the ship operators/technicians and the manufacturers of the multibeam systems to guarantee that each MBES is working at its peak performance level, 3.) developing tools that aid in the collection of data, assessment of the MBES hardware, and evaluation of the quality of the MBES data, 4.) creating "best practices" documentation concerning data acquisition and workflow, and 5.) providing a website, http://mac.unols.org, to host technical information, tools, reports, and a "help desk" for operators of the systems to ask questions concerning issues that they see with their systems.

  18. Evaluation of tte International System In Russian Official Discourse and Academic Analysis

    Directory of Open Access Journals (Sweden)

    Igor A. Istomin

    2016-01-01

    Full Text Available The article draws a comparison between Russian official and expert foreign policy discourses, focusing on representations of the power balance and relations between major states as the defining features of international system. The author attempts to identify actual and potential contribution of academics in the Russian foreign policy thinking. Conceptual documents and programme statements of national leadership elevate the notion of 'polycentric world' as a value in itself, which guides national actions on international arena. Although, until the late 2000s its rise was perceived as a welcome, but remote prospect, since the U.S. failures in Iraq and Afghanistan as well as global financial crisis expectations regarding it construction increased. They are accompanied, however, by a more critical appraisal of the concept. The mainstream Russian expert community shares normative appreciation of the polycentric global system as an intrinsic good. It also nourishes expectations of its emergence with almost inevitable certainty. Most of the time, it does not take into account concerns incorporated in the Western IR theories, regarding destabilizing effect of competition between multiple centers of power. The article demonstrates that both Russian political leadership and expert community perceive polycentric system as an international 'great power concert', which is just one and relatively rare form of it. It requires not only virtual parity in capabilities of several players, but also the lack of serious disputes among them. Meanwhile, in the Russia academic community there is a place for a critical tradition, which associates current decentralization of the international system with its chaotization and weakening governance. In recent years this approach gains additional prominence. However, the Russian debates on global order lacks more elaborated discussion regarding sources of power in international system as well as explanation of the binding

  19. MODULAR RESEARCH EQUIPMENT FOR ON-LINE INSPECTION IN ADVANCED MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Davrajh, S.

    2012-11-01

    Full Text Available The significance of inspection processes increases when producing parts with high levels of customer input. These processes must adapt to variations in significant product characteristics. Mass customisation and reconfigurable manufacturing are currently being researched as ways to respond to high levels of customer input. This paper presents the research and development of modular inspection equipment that was designed to meet the on-line quality requirements of mass customisation and reconfigurable manufacturing environments. Simulated results were analysed for application in an industrial environment. The implementation of the equipment in South Africa is briefly discussed. The research indicates that manufacturers need only invest in the required equipment configurations when they are needed for on-line inspection.

  20. Lean manufacturing and Toyota Production System terminology applied to the procurement of vascular stents in interventional radiology.

    Science.gov (United States)

    de Bucourt, Maximilian; Busse, Reinhard; Güttler, Felix; Wintzer, Christian; Collettini, Federico; Kloeters, Christian; Hamm, Bernd; Teichgräber, Ulf K

    2011-08-01

    OBJECTIVES: To apply the economic terminology of lean manufacturing and the Toyota Production System to the procurement of vascular stents in interventional radiology. METHODS: The economic- and process-driven terminology of lean manufacturing and the Toyota Production System is first presented, including information and product flow as well as value stream mapping (VSM), and then applied to an interdisciplinary setting of physicians, nurses and technicians from different medical departments to identify wastes in the process of endovascular stent procurement in interventional radiology. RESULTS: Using the so-called seven wastes approach of the Toyota Production System (waste of overproducing, waiting, transport, processing, inventory, motion and waste of defects and spoilage) as well as further waste characteristics (gross waste, process and method waste, and micro waste), wastes in the process of endovascular stent procurement in interventional radiology were identified and eliminated to create an overall smoother process from the procurement as well as from the medical perspective. CONCLUSION: Economic terminology of lean manufacturing and the Toyota Production System, especially VSM, can be used to visualise and better understand processes in the procurement of vascular stents in interventional radiology from an economic point of view.

  1. 77 FR 23618 - Authority To Manufacture and Distribute Postage Evidencing Systems

    Science.gov (United States)

    2012-04-20

    ... inventory control processes of PES provided to customers by manufacturers or distributors. The office formerly known as Postage Technology Management (PTM) is now known as Payment Technology, making it... maintain sufficient facilities for and records of the business relationship, distribution, control, storage...

  2. Optimal core acquisition and pricing strategies for hybrid manufacturing and remanufacturing systems

    NARCIS (Netherlands)

    Caner Bulmus, Serra; Zhu, Stuart X.; Teunter, Ruud H.

    2014-01-01

    In this study, we combine two aspects of remanufacturing, namely product acquisition management and marketing (pricing) of the remanufactured products. We consider an original equipment manufacturer (OEM) who decides on the acquisition prices offered for returns from different quality types and on

  3. Towards an industrial manufactured morphing trailing edge flap system for wind turbines

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Løgstrup Andersen, Tom; Bergami, Leonardo

    2014-01-01

    tunnel experiment in 2009 with promising results. This led in 2011 to initiation of a new research project INDUFLAP with the main aim to transfer the flap technology to industry as concerns manufacturing and testing. Three industrial partners are participating in the project. Rehau (DE) and Dansk Gummi...

  4. Classification of Reconfiguration Resources and Lead Time for Reconfigurable Manufacturing Systems

    NARCIS (Netherlands)

    Ing. Erik Puik; Daniël Telgen; Leo van Moergestel; Darek Ceglarek

    2014-01-01

    From the article: Manufacturing technology can improve the turnover of a company if it enables fast market introduction for volume production. Reconfigurable equipment is developed to meet the growing demand for more agile production. Modular reconfiguration, defined as changing the structure of

  5. Fostering academic competence or putting students under general suspicion? Voluntary plagiarism check of academic papers by means of a web-based plagiarism detection system

    Directory of Open Access Journals (Sweden)

    Kerstin Eleonora Kohl

    2011-02-01

    Full Text Available In view of the increasing number of cases of plagiarism and the ease of use of online published texts, universities are faced with a considerable challenge to prevent and take action against plagiarism in academic student papers. In reaction to plagiarism, web-based plagiarism detection systems (PDSs are increasingly used to check submitted papers - this checking entails various problems, for example the percentage of plagiarism found is only an indication of the actual extent of plagiarism and not all types of plagiarism can be identified. To cope with this problematic situation the voluntary plagiarism check (VPC, an alternative preventive university didactic concept, was developed at the University of Education, Freiburg (Germany. It focused on the development of individual skills. Students were able to submit their academic papers (e.g. an undergraduate paper, final thesis anonymously. These were then tested with the PDS Ephorus. Following interpretation and summary of the findings by the project team - plagiarism as well as referencing mistakes - we advised the students on a suitable approach to academic writing based on their own typical mistakes. The VPC was conducted as a three-semester research project and was later evaluated. About 500 academic papers were tested. In 90% of the undergraduates' work incorrect and/or missing citations were found. This high percentage decreased among students in later semesters. Instances of plagiarism were detected in about 40% of the papers when the texts of advanced students (≥6th semester were tested. At the same time the length of the plagiarised texts decreased. Around half of the students stated that it was acceptable to copy single sentences or short passages from other sources without citation; they did not consider plagiarising on a limited scale as cheating. A similar number of students admitted to having doubts about whether they could write a good paper without plagiarising. Almost all

  6. Firm-based Training and Innovative Strategies in the Manufacturing Sector. Empirical Evidence for a local industrial System

    OpenAIRE

    Giovanni Guidetti; Massimiliano Mazzanti

    2005-01-01

    The paper investigates the driving factors of firm training using a survey-based dataset concerning manufacturing firms in the Emilia Romagna Region, located in Northern Italy. Data derive from a structured questionnaire administered in 2002 to the management of a representative sample of firms with more than 50 employees in a highly industrialised local production system. The applied analysis explores the linkages between firm training activities and its driving forces. The main potential fa...

  7. Implementation of hierarchical design for manufacture rules in manufacturing processes

    OpenAIRE

    Parvez, Masud

    2008-01-01

    In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. ...

  8. Construction typification as the tool for optimizing the functioning of a robotized manufacturing system

    Science.gov (United States)

    Gwiazda, A.; Banas, W.; Sekala, A.; Foit, K.; Hryniewicz, P.; Kost, G.

    2015-11-01

    Process of workcell designing is limited by different constructional requirements. They are related to technological parameters of manufactured element, to specifications of purchased elements of a workcell and to technical characteristics of a workcell scene. This shows the complexity of the design-constructional process itself. The results of such approach are individually designed workcell suitable to the specific location and specific production cycle. Changing this parameters one must rebuild the whole configuration of a workcell. Taking into consideration this it is important to elaborate the base of typical elements of a robot kinematic chain that could be used as the tool for building Virtual modelling of kinematic chains of industrial robots requires several preparatory phase. Firstly, it is important to create a database element, which will be models of industrial robot arms. These models could be described as functional primitives that represent elements between components of the kinematic pairs and structural members of industrial robots. A database with following elements is created: the base kinematic pairs, the base robot structural elements, the base of the robot work scenes. The first of these databases includes kinematic pairs being the key component of the manipulator actuator modules. Accordingly, as mentioned previously, it includes the first stage rotary pair of fifth stage. This type of kinematic pairs was chosen due to the fact that it occurs most frequently in the structures of industrial robots. Second base consists of structural robot elements therefore it allows for the conversion of schematic structures of kinematic chains in the structural elements of the arm of industrial robots. It contains, inter alia, the structural elements such as base, stiff members - simple or angular units. They allow converting recorded schematic three-dimensional elements. Last database is a database of scenes. It includes elements of both simple and complex

  9. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  10. Evaluation of marginal and internal gap of three-unit metal framework according to subtractive manufacturing and additive manufacturing of CAD/CAM systems.

    Science.gov (United States)

    Kim, Dong-Yeon; Kim, Eo-Bin; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

    2017-12-01

    To evaluate the fit of a three-unit metal framework of fixed dental prostheses made by subtractive and additive manufacturing. One master model of metal was fabricated. Twenty silicone impressions were made on the master die, working die of 10 poured with Type 4 stone, and working die of 10 made of scannable stone. Ten three-unit wax frameworks were fabricated by wax-up from Type IV working die. Stereolithography files of 10 three-unit frameworks were obtained using a model scanner and three-dimensional design software on a scannable working die. The three-unit wax framework was fabricated using subtractive manufacturing (SM) by applying the prepared stereolithography file, and the resin framework was fabricated by additive manufacturing (AM); both used metal alloy castings for metal frameworks. Marginal and internal gap were measured using silicone replica technique and digital microscope. Measurement data were analyzed by Kruskal-Wallis H test and Mann-Whitney U-test (α=.05). The lowest and highest gaps between premolar and molar margins were in the SM group and the AM group, respectively. There was a statistically significant difference in the marginal gap among the 3 groups ( P manufacturing are clinically applicable. However, additive manufacturing requires more research to be applied clinically.

  11. Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications.

    Science.gov (United States)

    Cesewski, Ellen; Haring, Alexander P; Tong, Yuxin; Singh, Manjot; Thakur, Rajan; Laheri, Sahil; Read, Kaitlin A; Powell, Michael D; Oestreich, Kenneth J; Johnson, Blake N

    2018-06-13

    Three-dimensional (3D) printing now enables the fabrication of 3D structural electronics and microfluidics. Further, conventional subtractive manufacturing processes for microelectromechanical systems (MEMS) relatively limit device structure to two dimensions and require post-processing steps for interface with microfluidics. Thus, the objective of this work is to create an additive manufacturing approach for fabrication of 3D microfluidic-based MEMS devices that enables 3D configurations of electromechanical systems and simultaneous integration of microfluidics. Here, we demonstrate the ability to fabricate microfluidic-based acoustofluidic devices that contain orthogonal out-of-plane piezoelectric sensors and actuators using additive manufacturing. The devices were fabricated using a microextrusion 3D printing system that contained integrated pick-and-place functionality. Additively assembled materials and components included 3D printed epoxy, polydimethylsiloxane (PDMS), silver nanoparticles, and eutectic gallium-indium as well as robotically embedded piezoelectric chips (lead zirconate titanate (PZT)). Electrical impedance spectroscopy and finite element modeling studies showed the embedded PZT chips exhibited multiple resonant modes of varying mode shape over the 0-20 MHz frequency range. Flow visualization studies using neutrally buoyant particles (diameter = 0.8-70 μm) confirmed the 3D printed devices generated bulk acoustic waves (BAWs) capable of size-selective manipulation, trapping, and separation of suspended particles in droplets and microchannels. Flow visualization studies in a continuous flow format showed suspended particles could be moved toward or away from the walls of microfluidic channels based on selective actuation of in-plane or out-of-plane PZT chips. This work suggests additive manufacturing potentially provides new opportunities for the design and fabrication of acoustofluidic and microfluidic devices.

  12. Development of brain systems for nonsymbolic numerosity and the relationship to formal math academic achievement.

    Science.gov (United States)

    Haist, Frank; Wazny, Jarnet H; Toomarian, Elizabeth; Adamo, Maha

    2015-02-01

    A central question in cognitive and educational neuroscience is whether brain operations supporting nonlinguistic intuitive number sense (numerosity) predict individual acquisition and academic achievement for symbolic or "formal" math knowledge. Here, we conducted a developmental functional magnetic resonance imaging (MRI) study of nonsymbolic numerosity task performance in 44 participants including 14 school age children (6-12 years old), 14 adolescents (13-17 years old), and 16 adults and compared a brain activity measure of numerosity precision to scores from the Woodcock-Johnson III Broad Math index of math academic achievement. Accuracy and reaction time from the numerosity task did not reliably predict formal math achievement. We found a significant positive developmental trend for improved numerosity precision in the parietal cortex and intraparietal sulcus specifically. Controlling for age and overall cognitive ability, we found a reliable positive relationship between individual math achievement scores and parietal lobe activity only in children. In addition, children showed robust positive relationships between math achievement and numerosity precision within ventral stream processing areas bilaterally. The pattern of results suggests a dynamic developmental trajectory for visual discrimination strategies that predict the acquisition of formal math knowledge. In adults, the efficiency of visual discrimination marked by numerosity acuity in ventral occipital-temporal cortex and hippocampus differentiated individuals with better or worse formal math achievement, respectively. Overall, these results suggest that two different brain systems for nonsymbolic numerosity acuity may contribute to individual differences in math achievement and that the contribution of these systems differs across development. © 2014 Wiley Periodicals, Inc.

  13. Manufacturing of large and integral-type steel forgings for nuclear steam supply system components

    International Nuclear Information System (INIS)

    Kawaguchi, S.; Tsukada, H.; Suzuki, K.; Sato, I.; Onodera, S.

    1986-01-01

    Forgings for the reactor pressure vessel (RPV) of the pressurized heavy water reactor (PHWR) 700 MWe, which is composed of seven major parts and nozzles totaling about 965 tons, were successfully developed. These forgings are: 1. Flanges: an outside diameter of 8440 mm and a weight of 238 tons max, requiring an ingot of 570 tons. 2. Shells and torus: an outside diameter of about 8000 mm with large height. 3. Cover dome: a diameter of 6800 mm and a thickness of 460 mm, requiring a blank forging before forming of 8000 mm in diameter and 550 m thick. The material designation is 20Mn-Mo-Ni 5 5 (equivalent to SA508, Class 3). In this paper, the manufacturing of and the properties of such large and integral forgings are discussed, including an overview of manufacturing processes for ultralarge-sized forgings over the last two decades

  14. A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry

    Science.gov (United States)

    Srinivasa Rao, P.; Niraj, Malay

    2016-09-01

    Lean manufacturing is a business strategy developed in Japan. In the present scenario, the global market is developing new techniques for getting more and more production rate with a good quality under low cost. In this context, human factors have to be given importance to their working conditions. The study demonstrates the adoption of ergonomic conditions in lean manufacturing for the improvement of organizational performance of the industry. The aim of ergonomics is to adapt the new techniques to their work in efficient and safe ways in order to optimize the human health conditions and increasing the production rate. By conducting survey on various disciplines and showed how the production rate and human ergonomic conditions is affected.

  15. Extraterrestrial processing and manufacturing of large space systems, volume 2, chapters 7-14 and appendices

    Science.gov (United States)

    Miller, R. H.; Smith, D. B. S.

    1979-01-01

    Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.

  16. Manufacturing processes in the textile industry. Expert Systems for fabrics production

    OpenAIRE

    Bullon, Juan; González Arrieta, Angélica; Hernández Encinas, Ascensión; Queiruga Dios, Araceli

    2017-01-01

    The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities pr...

  17. Process Modelling of Rapid Manufacturing Based Mass Customisation System for Fabrication of Custom Foot Orthoses: Review Paper

    Directory of Open Access Journals (Sweden)

    Saleh Jumani

    2013-04-01

    Full Text Available The need for custom-made devices, rehabilitation aids and treatments is explicit in the medical sector. Applications of rapid manufacturing techniques based on additive fabrication processes combined with medical digitising technologies can generate high quality solutions in situations where the need for custom-made devices and rehabilitation aids and low-lead times are very important factors. Foot orthoses are medical devices applied in the treatment of biomechanical foot disorders, foot injuries and foot diseases including rheumatoid arthritis and diabetes. The significant challenge in the treatment of foot related diseases is progressing pathological deterioration in the affected sites of the foot which requires quick provision of the orthoses. A process model is developed using the IDEF0 modelling technique in which a rapid manufacturing approach is integrated in the design and fabrication process of custom foot orthoses. The process model will be used in the development of rapid manufacturing based design and fabrication system for mass customisation of foot orthoses. The developed system is aimed at mass scale production of custom foot orthoses with the advantages of reduced cost, reduced lead-time and improved product in terms of increased fit, consistency and accuracy in the final product.

  18. Accuracy Evaluation of 19 Blood Glucose Monitoring Systems Manufactured in the Asia-Pacific Region: A Multicenter Study.

    Science.gov (United States)

    Yu-Fei, Wang; Wei-Ping, Jia; Ming-Hsun, Wu; Miao-O, Chien; Ming-Chang, Hsieh; Chi-Pin, Wang; Ming-Shih, Lee

    2017-09-01

    System accuracy of current blood glucose monitors (BGMs) in the market has already been evaluated extensively, yet mostly focused on European and North American manufacturers. Data on BGMs manufactured in the Asia-Pacific region remain to be established. In this study, we sought to assess the accuracy performance of 19 BGMs manufactured in the Asia-pacific region. A total of 19 BGMs were obtained from local pharmacies in China. The study was conducted at three hospitals located in the Asia-Pacific region. Measurement results of each system were compared with results of the reference instrument (YSI 2300 PLUS Glucose Analyzer), and accuracy evaluation was performed in accordance to the ISO 15197:2003 and updated 2015 guidelines. Radar plots, which is a new method, are described herein to visualize the analytical performance of the 19 BGMs evaluated. Consensus error grid is a tool for evaluating the clinical significance of the results. The 19 BGMs resulted in a satisfaction rate between 83.5% and 100.0% within ISO 15197:2003 error limits, and between 71.3% and 100.0% within EN ISO 15197:2015 (ISO 15197:2013) error limits. Of the 19 BGMs evaluated, 12 met the minimal accuracy requirement of the ISO 15197:2003 standard, whereas only 4 met the tighter EN ISO 15197:2015 (ISO 15197:2013) requirements. Accuracy evaluation of BGMs should be performed regularly to maximize patient safety.

  19. Preliminary design and manufacturing feasibility study for a machined Zircaloy triangular pitch fuel rod support system (grids) (AWBA development program)

    International Nuclear Information System (INIS)

    Horwood, W.A.

    1981-07-01

    General design features and manufacturing operations for a high precision machined Zircaloy fuel rod support grid intended for use in advanced light water prebreeder or breeder reactor designs are described. The grid system consists of a Zircaloy main body with fuel rod and guide tube cells machined using wire EDM, a separate AM-350 stainless steel insert spring which fits into a full length T-slot in each fuel rod cell, and a thin (0.025'' or 0.040'' thick) wire EDM machined Zircaloy coverplate laser welded to each side of the grid body to retain the insert springs. The fuel rods are placed in a triangular pitch array with a tight rod-to-rod spacing of 0.063 inch nominal. Two dimples are positioned at the mid-thickness of the grid (single level) with a 90 0 included angle. Data is provided on the effectiveness of the manufacturing operations chosen for grid machining and assembly

  20. The Effect of Individualized Instruction System on the Academic Achievement Scores of Students

    Directory of Open Access Journals (Sweden)

    Ferhat Bahçeci

    2016-01-01

    Full Text Available A web-based learning portal offering individualized learning was developed by utilizing rule-based knowledge representation and artificial intelligence techniques of expert systems in order to reduce the uncertainties of learning to minimum and to construct an intelligent tutoring system. This portal offers individualized learning content based on the individual’s level of cognitive knowledge. In order to determine the effects of the developed system on the student achievement, the system was tested in an 8-week-long study on the students of Software Engineering Department of Technology Faculty. The pretest-posttest control group experimental design was used in the study. The experimental group received education with Individualized Instruction Portal while the control group received education in traditional learning environment. Academic achievement test was used as the data collection tool. In order to test the research hypotheses, data obtained from the data collection tools were analysed in terms of frequency, percentages, and dependent-independent t-test with statistical software program. Based on the results, no significant differences were found between the groups in terms of the pretest. On the other hand, significant differences were found between experimental and control group in terms of the posttest. It was concluded that individualized learning portal had positive effect on the students’ learning when used in combination with traditional learning environment.