WorldWideScience

Sample records for manganiferous ore effect

  1. Reducing acid leaching of manganiferous ore: effect of the iron removal operation on solid waste disposal.

    Science.gov (United States)

    De Michelis, Ida; Ferella, Francesco; Beolchini, Francesca; Vegliò, Francesco

    2009-01-01

    The process of reducing acid leaching of manganiferous ore is aimed at the extraction of manganese from low grade manganese ores. This work is focused on the iron removal operation. The following items have been considered in order to investigate the effect of the main operating conditions on solid waste disposal and on the process costs: (i) type and quantity of the base agent used for iron precipitation, (ii) effective need of leaching waste separation prior to the iron removal operation, (iii) presence of a second leaching stage with the roasted ore, which might also act as a preliminary iron removal step, and (iv) effect of tailings washing on the solid waste classification. Different base compounds have been tested, including CaO, CaCO3, NaOH, and Na2CO3. The latter gave the best results concerning both the precipitation process kinetics and the reagent consumption. The filtration of the liquor leach prior to iron removal was not necessary, implying significant savings in capital costs. A reduction of chemical consumption and an increase of manganese concentration in the solution were obtained by introducing secondary leaching tests with the previously roasted ore; this additional step was introduced without a significant decrease of global manganese extraction yield. Finally, toxicity characteristic leaching procedure (TCLP) tests carried out on the leaching solid waste showed: (i) a reduction of arsenic mobility in the presence of iron precipitates, and (ii) the need for a washing step in order to produce a waste that is classifiable as not dangerous, taking into consideration the existing Environmental National Laws.

  2. Mixed State and High Effective Utilization of Pilbara Blending Iron Ore Powder%Mixed State and High Effective Utilization of Pilbara Blending Iron Ore Powder

    Institute of Scientific and Technical Information of China (English)

    CAO Yong-guo; WU Sheng-li; HAN Hong-liang; WANG Hong-wei; XUE Fang; LIU Xiao-qin

    2011-01-01

    Pilbara blending iron ore powder (PB powder) is blending ores with good and poor quality iron ores, so how to use PB power effectively is a problem. The self-characteristics of PB powder and its single-components were studied respectively such as the macroscopic properties, microscopic properties, and high-temperature properties the behavior and effect in the sintering were mastered. Then based on the new ore-proportioning idea of iron ores sintering characteristics complementary, the principles on the effective use of PB powder were discussed, and was fur ther validated through the sintering pot test and industrial production. The results show that PB powder is composed of three kinds of iron ore, and the sintering characteristics of different iron ores are obviously discrepant. With the ore-proportioning optimization based on the iron ores sintering characteristics complementary, the proportion of PB iron ore powder can be increased to more than 45 %.

  3. Nonlinear Effects of Laser Surface Modification of Ore Minerals

    Directory of Open Access Journals (Sweden)

    N.A. Leonenko

    2015-12-01

    Full Text Available The effect of continuous laser radiation on complex ore minerals objects containing gold, not extracted by monerd methods was investigated. It was established the formation of different structural surfaces of gold, revealed general patterns of sintering and concentration of sub-micron gold.

  4. Cadmium extraction from phosphate ore. Effect of microwave

    Directory of Open Access Journals (Sweden)

    Zahia Benredjem

    2016-09-01

    Full Text Available This study discusses the operating variables for removal of cadmium from phosphate ore using Na2EDTA. These variables include the reaction time, Na2EDTA concentration, liquid/phosphate ore ratio, number of extractions and microwave extraction. Na2EDTA induced a two-step extraction process including a rapid extraction within the first hour, and a subsequent gradual release that occurred over the following hours. The cadmium extraction efficiency increased progressively with the increasing of Na2EDTA concentration. The extraction efficiency of cadmium increased with increasing liquid/phosphate ratio in the 5–200 range. Consecutive extractions using low concentrations were more effective than a single soil extraction with concentrated Na2EDTA. Microwave was beneficial to improve the removal in soil washing, and using microwave could partly substitute for agitation.

  5. Effects of Mineral Composition and Microstructure on Crack Resistance of Sintered Ore

    Institute of Scientific and Technical Information of China (English)

    YING Zi-wei; JIANG Mao-fa; XU Li-xian

    2006-01-01

    Vickers indentation test was used to study the effects of mineral composition and microstructure on crack resistance of sintered ore, and the initiation and propagation of cracks in different minerals contained in sintered ore were examined. The results indicate that the microstructure of calcium ferrites is a major factor influencing crack resistance of sintered ore. Finer grain size of calcium ferrite will lead to higher cracking threshold and better crack resistance of sintered ore. The formation of calcium ferrite with fine grain size during sintering process is favorable for crack resistance of sintered ore.

  6. Effects of iron oxidizing bacteria in thiourea leaching of gold ores

    OpenAIRE

    甲斐, 敬美; 山崎, 研市; 高橋, 武重; カイ, タカミ; ヤマサキ, ケンイチ; タカハシ, タケシゲ; KAI, Takami; YAMASAKI, Kenichi; Takahashi, Takeshige

    1991-01-01

    Bacterial leaching was combined with thiourea method for the gold leaching from ores. For gold bearing pyrites, biological pre-oxidation has been generally perfomed. In the present study, we carried out the biological treatment to the high silicate bearing ores by using the iron oxidizing bacteria, Thiobacillus ferrooxidans. The recovery of gold and silver was enhanced by the biological pretreatment, while the effects of the treatment was influenced by the types of gold ores. Since the biolog...

  7. EXPERIMENTAL STUDY ON THE LOAD DECAY AND ITS EFFECT ON LEAK RATE OF O-RING

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Experimental studies on load decay and leak rate of O-rings made of two kinds of silicone rubber are conducted. The results show that the characteristic of load decay is relative to the material and temperature of O-rings; the rate of load decay increases with the rise of temperature; the effects of load decay on leak rate of O-rings are negligible at room temperature, but they are notable at high temperature, and they are related to the material of O-rings. On the basis of study on the theory of load decay and analysis to the results of experiments, a theoretical model is developed to describe the load decay characteristic of O-rings, and it matches the experimental data very well. By the study of time-temperature equivalence of load decay, the interconvertting equation of test data of load decay at different temperatures is obtained.

  8. In vitro adverse effects of iron ore dusts on human lymphoblastoid cells in culture.

    Science.gov (United States)

    Wang, He; Wang, Jing J; Sanderson, Barbara J S

    2013-01-01

    The aim of this study was to investigate the adverse effects produced by four types of iron (Fe) ore dust using cultured human cells. Genotoxicity and cytotoxicity induced by Fe ore dusts were determined by assays including cytokinesis block micronucleus (CBMN), population growth, and methyl tetrazolium (MTT). Four iron ore dusts were tested, namely, 1002 Limonite & Goethite (1002), HG2 hematite (HG2), HG1 Soutlem Pit (HG1), and HG4. WIL2 -NS cells were incubated for 10 h with extracts from a range of concentrations (0, 75, or 150 μg/ml) of Fe ore dust. Significant decreases in percent cell viability were seen at 150 μg/ml HG2 and 1002 as measured by MTT, with viability that decreased to 75 and 73%, respectively, compared to untreated controls. The cell population regrew to a different extent after Fe ore dust was removed, except for HG1, where population remained declined. An approximately twofold significant increase in the frequency of micronucleated binucleated cells (MNBNC) was seen with 1002, HG2, and HG1 at 150 μg/ml. A significant rise in apoptosis induction was observed at 150 μg/ml HG1. Data indicate that Fe ore dusts at 150 μg/ml produced cytotoxicity and genotoxicity.

  9. A Study on the Ore-forming Effect of Mantle-derived Fluid

    Institute of Scientific and Technical Information of China (English)

    Meng Qingqiang; Wu Jianfeng; Zhang Liuping

    2007-01-01

    Based on summarizing of the effect of mantle-derived fluid on the formation of ores, especially on gold ore,and with the latest investigations, such as the formation of ore from the action of shallow-deep fluid, the transportation effect of the thermal energy by mantle-derived fluid, this paper mainly aims at the effect of mantle-derived fluid on the generation of hydrocarbons. With the proof from geochemistry and fluid inclusion, it was suggested that the mantle-derived fluid not only supplied source materials for hydrocarbons, but also supplied essential energy and matter necessary for the generation of hydrocarbons. The mantle-derived fluid had a good effect, but at the same time it had an adverse effect under specific conditions, on the formation of reservoirs. This paper also discusses the future direction and significance of studying mantle-derived fluid.

  10. Effect of basicity on ferromanganese production from beneficiated low-grade manganese ore

    Science.gov (United States)

    Suharno, Bambang; Noegroho, Adi; Ferdian, Deni; Nurjaman, Fajar

    2017-01-01

    Indonesia is known to have a large low-grade manganese ore reserve. Nevertheless, it could not be used optimally in producing ferromanganese due to their low Mn/Fe ratio. In this present study, the beneficiation process had been applied to the low-grade manganese ore. Reduction roasting was conducted to this manganese ore at 700°C for an hour and then continued with low-intensity magnetic separation. This process had improved the Mn/Fe ratio from 1.39 to 6.11. The effect of basicity on ferromanganese production from this beneficiated low-grade manganese ore had been investigated clearly in this experiment by using mini submerged arc furnace (SAF). Several basicities for 0.7 and 1.0, was used and it was controlled by the addition of limestone in this smelting process. From this experiment, the ferromanganese containing 60% Mn was obtained from smelting the beneficiated low-grade manganese ore with the optimum basicity 0.7.

  11. Catalytic effect of activated carbon on bioleaching of low-grade primary copper sulfide ores

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was investigated. The results show that the addition of activated carbon can greatly accelerate the rate and efficiency of copper dissolution from low-grade primary copper sulfide ores. The solution with the concentration of 3.0 g/L activated carbon is most beneficial to the dissolution of copper. The resting time of the mixture of activated carbon and ores has an impact on the bioleaching of low-grade primary copper sulfide ores. The 2 d resting time is most favorable to the dissolution of copper. The enhanced dissolution rate and efficiency of copper can be attributed to the galvanic interaction between activated carbon and chalcopyrite. The addition of activated carbon obviously depresses the dissolution of iron and the bacterial oxidation of ferrous ions in solution. The lower redox potentials are more favorable to the copper dissolution than the higher potentials for low-grade primary copper sulfide ores in the presence of activated carbon.

  12. Influence of Size Effects on the Properties of Processed Iron Ore and Schungite Rock

    Directory of Open Access Journals (Sweden)

    Yu. Mirgorod

    2016-06-01

    Full Text Available Scanning electron microscopy, energy dispersion spectroscopy, X-ray diffractometry and magnetometry methods were used to investigate the structure and magnetic properties of iron ore and schungite rock. The results show the existence of external size effect in iron ore concentrate. It is related with the penetration of iron nanoparticles from equipment surfaces onto the powder surface, which increases specific magnetic saturation of the powder by 1.6 times compared with pure magnetite. As a result of internal size effect in schungite powder its reactivity decreases by 800 °С and after heat treatment of the powder its specific magnetic saturation increases by seven times. Considering the application of size effects the investigated powders and waste natural mineral powders are recommended to be used in the production of composite materials.

  13. Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

    Science.gov (United States)

    Liu, Dong-hui; Liu, Hao; Zhang, Jian-liang; Liu, Zheng-jian; Xue, Xun; Wang, Guang-wei; Kang, Qing-feng

    2017-09-01

    The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results show that the Ore-A exhibits good granulation properties, strong liquid flow capability, high bonding phase strength and crystal strength, but poor assimilability. With increasing Ore-A ratio, the tumbler index and the reduction index (RI) of the sinter first increase and then decrease, whereas the softening interval (Δ T) and the softening start temperature ( T 10%) of the sinter exhibit the opposite behavior; the reduction degradation index (RDI+3.15) of the sinter increases linearly, but the sinter yield exhibits no obvious effects. With increasing Ore-A ratio, the distribution and crystallization of the minerals are improved, the main bonding phase first changes from silico-ferrite of calcium and aluminum (SFCA) to kirschsteinite, silicate, and SFCA and then transforms to 2CaO·SiO2 and SFCA. Given the utilization of Ore-A and the improvement of the sinter properties, the Ore-A ratio in the high-limonite sintering process is suggested to be controlled at approximately 6wt%.

  14. Effect of technological factors on bacterial leaching of low-grade Ni-Cu sulfide ore

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The bioleaching of a low-grade Ni-Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobaxillus thiooxxidlans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the pulp den sity and the ratio of TF5 and TT on leaching was described, and the favorable bioleaching conditions for the ore were ex perimentally confirmed. The aeration leaching, agitation leaching with air bubbling, and column leaching were respective ly tested. The highest recovery was achieved in the aeration leaching. After leaching for 20 d with pulp density of 15 %, the extractions of Ni, Cu and Co were respectively 95.4 %, 48.6 % and 82.6 %.

  15. The Effects of Ore Properties on the Characterization of Suspension in Settling and Compression

    Directory of Open Access Journals (Sweden)

    Majid Unesi

    2014-06-01

    Full Text Available Many studies have considered the effects of suspension properties on the dewatering process but fewhave focused on ore properties. Thus, the present work studied the effects of ore properties (density,particle size, mineralogy on the dewatering process based on lab and pilot experiments. A hydrocyclonewas used to prepare the required samples for the experiments. To study the effects of mineralogicalproperties, the sedimentation behaviour of hydrocyclone feed and underflow samples were compared. Itwas observed that the free-settling velocity of feed (2 to 6mm/sec was less than in the underflow sample(2 to 7mm/sec and the final concentration of underflow sample (0.45 to 0.48t/m3 was more than thefeed sample (0.44 to 0.47t/m3. Additionally, to study the effects of particle size and density, thesedimentation behaviour of hydrocyclone overflow and feed samples were compared. The settlingvelocity and final concentration of overflow sample were obtained at 0.15 to 0.4mm/sec and 0.32t/m3,respectively, which was significantly less than the feed sample. This was due to the amount of clayreduction in the underflow sample and particle size and density reduction in the overflow sample.Following on, the pilot experiments were carried out. It was observed that the bed formation of the feedsample tended to overflow in the sample at low flux (10t/m2/day and tended to underflow in the sampleat high flux (28.5t/m2/day. This meant that the long time at lower flux created an opportunity for fineparticles to settle easily, similar to coarser particles and as such, ore properties did not play a decisiverole in bed formation, but their effects appeared instead at higher flux. Furthermore, it was observed thatthe underflow concentration increased by decreasing the flux from 28.5 to 10t/m2/day. These increasingamounts were 0.05t/m3 and 0.12t/m3 in hydrocyclone overflow and underflow samples, respectively, at aheight of 2.5 metres. This meant that the compressibility and

  16. Genetic and biochemical effects induced by iron ore, Fe and Mn exposure in tadpoles of the bullfrog Lithobates catesbeianus.

    Science.gov (United States)

    Veronez, Alexandra Caroline da Silva; Salla, Rômulo Victor; Baroni, Vinícius Dadalto; Barcarolli, Indianara Fernanda; Bianchini, Adalto; Dos Reis Martinez, Claudia Bueno; Chippari-Gomes, Adriana Regina

    2016-05-01

    For decades, the extraction of minerals has intensified in order to meet the demand of industry. Iron ore deposits are important sources of metals, such as iron (Fe) and manganese (Mn). The particulate ores can be dispersed during extraction, transport and storage, with potential to induce biological impacts. Amphibians are very sensitive to environmental stressors. Therefore, the present study aimed to assess the effects of iron ore, Fe and Mn exposure during the metamorphosis of Lithobates catesbeianus. Endpoints analyzed included morphological (biometrical and developmental analyses), whole body Fe and Mn concentration in, plasma ferritin concentration, erythrocyte DNA damage (measured through comet assay and micronucleus test) and liver activity of enzymes involved in oxidative status [glutathione S-transferase (GST) and catalase (CAT)]. Tadpoles were kept under control condition (no contaminant addition) or exposed to iron ore (3.79mg/L as fine particulate matter); Fe (nominal concentration: 0.51mg/L Fe as C10H12FeN2NaO8; Fe-EDTA); and Mn (nominal concentration: 5.23mg/L Mn as 4H2O.MnCl2) for 30 days. Virtually, no mortality was observed, except for one tadpole found dead in the iron ore treatment. However, tadpoles exposed to iron ore had longer tail than those kept under control conditions while tadpoles exposed to manganese chloride showed higher body length than control ones. Exposure to Fe and Mn induced a delay in tadpole metamorphosis, especially when these metals are presented not as a mixture (iron ore). Tadpoles exposed to iron ore had increased whole body Fe and Mn while those exposed to Fe and Mn accumulated each metal individually. Tadpoles exposed to any of the contaminants tested showed a significant increase in erythrocyte DNA damage and frequency of micronuclei. In addition, they showed higher liver GST activity respect with those kept under control conditions. Plasma ferritin concentration and liver CAT activity were higher only in tadpoles

  17. Biological Effects of Cloth Containing Specific Ore Powder in Patients with Pollen Allergy

    Institute of Scientific and Technical Information of China (English)

    Suni LEE; YasuzoKIRITA; YoshioFUJII; TakemiOTSUKI; HitoshiOKAMOTO; ShokoYAMAMOTO; TamayoHATAYAMA; HidenoriMATSUZAKI; Naoko KUMAGAI-TAKEI; KeiYOSHITOME; YasumitsuNISHIMURA; ToshiakiSATO

    2016-01-01

    ObjectiveThe custom-homebuilding company, Cosmic Garden Co. Ltd., located in Okayama City, Japan was established in 1997 and uses specific natural ore powder (SNOP) in wall materials and surveys customers in order to improve allergic symptoms. MethodsTo investigate the biological effects of SNOP, patients with a pollen allergy were recruited to stay in a room surrounded by cloth containing SNOP (CCSNOP), and their symptoms and various biological parameters were compared with those of individuals staying in a room surrounded by control non-woven cloth (NWC). Each stay lasted 60 min. Before and immediately after the stay, a questionnaire regarding allergic symptoms, as well as POMS (Profile of Mood Status) and blood sampling, was performed. Post-stay minus pre-stay values were calculated and compared between CCSNOP and NWC groups. ResultsResults indicated that some symptoms, such as nasal obstruction and lacrimation, improved, and POMS evaluation showed that patients were calmer following a stay in CCSNOP. Relative eosinophils, non-specific Ig E, epidermal growth factor, monocyte chemotactic protein-1, and tumor necrosis factor-α increased following a stay in CCSNOP. ConclusionThis ore powder improved allergic symptoms, and long-term monitoring involving 1 to 2 months may be necessary to fully explore the biological and physical effects of SNOP on allergic patients.

  18. DRY AND WET GRINDING KINETICS OF CHROMIUM ORE AND EFFECT OF PULP DENSITY

    Directory of Open Access Journals (Sweden)

    Alper ÖZKAN

    2006-01-01

    Full Text Available In this study, the kinetics of dry and wet grinding of various feed sizes of chromium ore has been determined using a laboratory scale ceramic ball mill. In addition, the effect of pulp density on the spesific rate of breakage (Si and net production rate to finer than specified size were investigated. The dry and wet grinding of all the size intervals of chromium ore followed the first-order breakage law, and the Si values increased as the feed sizes became coarser. Moreover, the wet grinding of these various feed sizes gave higher Si values by a factor of 2.0 to 2.6 comparing to the dry Si values. From the experimental studies performed on the effect of pulp density on the grinding process, the highest Si value was obtained at a pulp density of 45 % solids by volume. At the same pulp density value, the rate of net production of -75 µm particle size also reached the highest value.

  19. Effect of a cyclonic flotation column on the separation of magnesium from phosphate ore

    Institute of Scientific and Technical Information of China (English)

    Li Guosheng; Liu Jiongtian; Cao Yijun; Wang Dapeng

    2011-01-01

    This study was performed to investigate the effects of the cyclonic separation mechanism on the removal of magnesium from phosphate ore.An analysis of the particle-bubble collision mechanism in a cyclonic force field was used to design two different pulp circulation systems for a cyclonic-static micro-bubble flotation column (FCSMC).Experiments comparing the two conditions were then conducted.Size analysis of the feed and separated products was conducted with a BXF cyclone size analyzer.The results show that about 34.60% of the total MgO content in the feed exists in the -10 μm fraction.This demonstrates that magnesium removal from phosphate ore has the characteristics of a micro-fine particle flotation problem.Under conditions of cyclonic circulation the MgO level of the concentrate is 1.74%,which is lower than that obtained from the column operated in direct-flow circulation by 0.34%.These results indicate that the cyclonic circulation mechanism of the FCSMC can promote removal of micro-fine particles containing magnesium.This is attributed to the function of surface flotation and to the reduction of the lower separation limit under conditions of cyclonic circulation.

  20. Effect of Groundwater Radiolysis on the Wall—rock Alteration of Uranium Ore Deposits

    Institute of Scientific and Technical Information of China (English)

    闵茂中; 吴俊奇; 等

    1994-01-01

    Reported for the first time in this paper are the results of simulating experiments on the γ-irradiation-induced oxidation of Fe2+ under the physicochemical conditions(T=200℃,P=50MPa,Eh=-0.1V,pH=7.2)simial to those under which moderate-low temperature hydrothermal uranium deposits are formed.Evdence shows that the effect of groundwater radiolysis seems to be the major mechanism of wall-rock alteration(hematitizaton)of hydrothermal uranium deposits.Moreover,adiscussion was made of possible effects of radiolysis of the water-rock system on wall-rock alterations including argillization and decoloration of uranium ore deposits on the basis of the experimental results.

  1. Analytical and mineralogical study of a Ghana manganese ore: Quantification of Mn speciation and effect of mechanical activation.

    Science.gov (United States)

    He, Hongping; Cao, Jianglin; Duan, Ning

    2016-11-01

    In-depth understanding of the manganese ore would be beneficial to make the best use more environmental-friendly. A Ghana manganese ore before/after mechanical activation (MA) was therefore extensively characterized in our investigation. Surface Mn(4+)(35.5%), Mn(3+)(35.9%), Mn(2+)(28.6%) were detected by XPS, though XRD only revealed the presence of Mn(2+)-containing minerals. Thermal decomposition curve of manganese ore obtained by TG-DSC was divided into four stages from 373.15 K to 1273.15 K, which were quite consistent with the pattern of generated gases obtained by TG-FTIR and the theoretical thermodynamics analysis of the incorporated components involving ΔGT(θ) and Kp(θ). Mn species distribution showed no difference for manganese ores before/after MA, but quantitative analysis showed the decrease of residual Mn content (cannot be extracted effectively by acid, from about 12% to 1%), and thereby the increased contents of other four Mn species (exchangeables, carbonates, oxides, organics), which was suggested to be correlated with the dissociation of Mn-containing flocs and SiO2 particles witnessed by SEM-EDS. It was also found that MA could obviously promote the Mn dissolution kinetics in acid condition, though the dissolution of manganese ore before/after MA were both diffusion controlled. This investigation gives benignant inspiration for the resource utilization of manganese ore, taking the increasingly severer situation of Mn resource supply into consideration.

  2. Effects of impeller speed and aeration rate on flotation performance of sulphide ore

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of aeration rate and impeller speed on the concentrate sulfur grade and recovery for batch flotation of a complex sulphide ore were investigated. The relationships between the water recovery and solid entrainment were discussed. It is found that the solid entrainment is linearly related to the water recovery regardless of aeration rate and impeller speed, and the higher sulfur recovery at the aeration rate of 2 and 4 L/min for the impeller speed of 1 500 r/min is considered to be the contribution of true flotation. Finally, the sulfur recovery flux is correlated with the bubble surface area flux based on the froth image at the different aeration rates and impeller speeds.

  3. Effect of dolomite on reduction swelling property of iron ore pellets

    Institute of Scientific and Technical Information of China (English)

    许斌; 侯通; 陈许玲; 李骞; 姜涛; 李鹏

    2013-01-01

    The effect of various dosages of dolomites on the reduction swelling property of iron ore pellets was studied. Experimental results show that the reduction swelling index(RSI) decreases from 13.35% to 4.0%, while the porosity of roasted pellets increases from 35% to 40% with increasing the dolomite dosage from 0 to 10.5%. Meanwhile, the content of magnesium ferrite with high melting temperature, as well as the stability of magnetite(Fe3 O4) in the roasted pellets, increases with increasing the magnesium oxide(MgO) content from dolomite. The reasons for the decrease of RSI rely on the absence of crystal transformation from Fe2 O3 to Fe3 O4, the increased porosity of roasted pellet, and the suppression of phase transition of 2CaO·SiO2 resulted from the incorporation of magnesium into calcium silicate.

  4. Effects of Particle Size and Particle Loading on the Tensile Properties of Iron-Ore-Tailing-Filled Epoxy and Polypropylene Composites

    Science.gov (United States)

    Onitiri, M. A.; Akinlabi, E. T.

    2017-01-01

    The effect of particle size and particle loading on the stiffness and tensile strength of iron-ore-tailing-filled epoxy and polypropylene composites was investigated experimentally, and the results obtained are compared with calculations by various theoretical models. It was found that the stiffness of the materials increased with content of iron ore tailings.

  5. Kellad orelis

    Index Scriptorium Estoniae

    2000-01-01

    18. VI Tallinna toomkirikus organist Ines Maidre (kaastegev Kristjan Mäeots) kontsert "Kellad orelis". Kontserdiga esitleb I. Maidre ka oma samanimelist CD-d (kujundaja Margus Haavamägi), mis on osaliselt sisse mängitud Tallinna toomkiriku Ladegasti-Saueri orelil. Tänavu tähistatakse toomkiriku Maarja kella ja Lunastaja kella 315. aastapäeva.

  6. Effect of desliming on the flotation of a complax copper ore from China

    Directory of Open Access Journals (Sweden)

    Chen Yong

    2016-01-01

    Full Text Available The complex copper oxide ore sample was taken from Deerni copper deposit, Qinghai Province of China. Batch flotation tests had been conducted to upgrade the copper concentrate by conventional amyl xanthate reagents under 73% -74 μm of the particle size; however, the unsatisfied results (Cu grade of 18.21% and recovery of 59.25% were obtained. Also there are a large amount of slimes trapped in the concentrate and high-dosages consumption of reagents, for example, more than 2.5 kg/t sodium sulfide and 1.5 kg/t sodium silicate at only one-staged roughing. Based on the analysis of the sample, most of gangues are clay, feldspar and mica, which may easy to over-grind and deteriorate the flotation process either on reagents consumption or slurry fluidity or viscosity. A hydro-cyclone had been introduced to pre-concentrate the oxide ore by scrubbing the slime before flotation, which can result obviously in reducing the dosages of sodium sulfide from 2.5 Kg/t to 1 Kg/t, and raising the grade of Cu in the concentrate from 18.21% to 26.65% at the expense of about 1% recovery of Cu. In this paper, the effects on the recovery of Cu by the different dosages of flotation reagents with or without de-sliming were studied, with the objective of determining the different effects on the functions of flotation reagents by slime during flotation.

  7. Application of indigenous sulfur-oxidizing bacteria from municipal wastewater to selectively bioleach phosphorus from high-phosphorus iron ore: effect of particle size.

    Science.gov (United States)

    Shen, Shaobo; Rao, Ruirui; Wang, Jincao

    2013-01-01

    The effects of ore particle size on selectively bioleaching phosphorus (P) from high-phosphorus iron ore were studied. The average contents of P and Fe in the iron ore were 1.06 and 47.90% (w/w), respectively. The particle sizes of the ores used ranged from 58 to 3350 microm. It was found that the indigenous sulfur-oxidizing bacteria from municipal wastewater could grow well in the slurries of solid high-phosphorus iron ore and municipal wastewater. The minimum bioleaching pH reached for the current work was 0.33. The P content in bioleached iron ore reduced slightly with decreasing particle size, while the removal percentage of Fe decreased appreciably with decreasing particle size. The optimal particle size fraction was 58-75 microm, because the P content in bioleached iron ore reached a minimum of 0.16% (w/w), the removal percentage of P attained a maximum of 86.7%, while the removal percentage of Fe dropped to a minimum of 1.3% and the Fe content in bioleached iron ore was a maximum of 56.4% (w/w) in this case. The iron ores thus obtained were suitable to be used in the iron-making process. The removal percentage of ore solid decreased with decreasing particle size at particle size range of 106-3350 microm. The possible reasons resulting in above phenomena were explored in the current work. It was inferred that the particle sizes of the iron ore used in this work have no significant effect on the viability of the sulfur-oxidizing bacteria.

  8. Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin, Northern Guangdong, China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper,we have revealed the temporo-spatial evolution law of the basin's fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. (1) The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. (2) The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. (3) The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits.(4) The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn-S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to

  9. Evaluation of the effectiveness of the filtration leaching for uranium recovery from uranium ore

    OpenAIRE

    2015-01-01

    The physical and chemical processes taking place in filtration leaching of uranium from uranium ore sample by sulphuric acid solution have been studied by modern physico-chemical methods (X-ray diffraction, scanning electron spectroscopy, electron probe microanalysis, optical emission spectroscope, ICP OES). Column leaching test was carried out for ore samples obtained from a uranium in-situ leaching (ISL) mining site using deluted sulphuricacid to study the evolution of various elements conc...

  10. Effect of Various Parameters on the Dispersion of Ultra Fine Iron Ore Slurry. Part-2.

    Directory of Open Access Journals (Sweden)

    M. I. Abro

    2010-12-01

    Full Text Available Among the list of dispersion parameters effect of solid concentration, slurry pH, stirring speed and time were studied in Part I for stablization of Dilband iron ore slurry. In Part II the study is extended to survey most appropriate dispersant and its optimal dose. In present study sodium silicate (SS, sodium hexametaphosphate (SHMP, sodium pyrophosphate (SPP, and ethylene-diamine-tetraacetatic-acid (EDTA dispersants were used. The different doses of these dispersants were studied at solid concentration 7.5%, pH 10.5, stirring speed 2000 rpm, and stirring time 5min, as optimal conditions found in Part I. Marginal improvement in slurry stabilization with addition of SS, SHMP, SPP, and EDTA was noted, however EDTA found to be most effective in stabilizing the slurry as compared to others. For the different doses of EDTA, SPP, SHMP, and SS tested, the best disperse ability was obtained at concentration of 0.135%, 0.025%, 0.2%, and 1.25% respectively.

  11. Effect of particle size on the froth floatation of Sokoto phosphate ore

    Directory of Open Access Journals (Sweden)

    U.A. Hassan

    2016-06-01

    Full Text Available Effect of particle size on the froth floatation of Sokoto phosphate ore for its beneficiation has been investigated and established. The research has been conducted using various reagents, pH(s at different sieve size fractions. Bench scale flotation tests were carried out on -250+180μm, -180+106μm, -106+75μm, -75+45μm and -45+38μm particle size fractions after screening in order to determine the optimum flotation feed size distribution using 1 liter Denver flotation cell. The results of the scoping flotation studies using a conditioning Pulp Density of 60%Solids, pH9, 800g/t reagent dosage for AERO704 Promoter (Fatty Acid and flotation pulp density of 28.5% Solids show that +106μm particle size gave the highest assay content of 20.4% P2O5 with a recovery of 76.2% compared to +38μm (19.9%P2O5 and recovery of 43.2% and +180μm (19.4%P2O5 and 24.1% recovery in their floats (concentrates but with no perfect separation as the tailings fraction also contained similar grades with slight differences.

  12. Modeling and experimental examination of water level effects on radon exhalation from fragmented uranium ore.

    Science.gov (United States)

    Ye, Yong-Jun; Dai, Xin-Tao; Ding, De-Xin; Zhao, Ya-Li

    2016-12-01

    In this study, a one-dimensional steady-state mathematical model of radon transport in fragmented uranium ore was established according to Fick's law and radon transfer theory in an air-water interface. The model was utilized to obtain an analytical solution for radon concentration in the air-water, two-phase system under steady state conditions, as well as a corresponding radon exhalation rate calculation formula. We also designed a one-dimensional experimental apparatus for simulating radon diffusion migration in the uranium ore with various water levels to verify the mathematical model. The predicted results were in close agreement with the measured results, suggesting that the proposed model can be readily used to determine radon concentrations and exhalation rates in fragmented uranium ore with varying water levels. Copyright © 2016. Published by Elsevier Ltd.

  13. Utilization of Lime Fines as an Effective Binder as well as Fluxing Agent for Making Fluxed Iron Ore Pellets

    Science.gov (United States)

    Mandal, Arup Kumar; Sarkar, Alok; Sinha, Om Prakash

    2016-04-01

    A laboratory study was carried out to characterize the physical, chemical and mechanical properties of lime fluxed (varying basicity 0-2) hematite iron ore pellets. Lime was used as additive as well as fluxing agent for making iron ore pellets. The effect of additives on different properties of pellets was studied. The findings show that on increasing the addition of lime, more of calcium-alumino-silicate phases were produced as confirmed by SEM-EDAX analysis. These phases have low melting points, which enhances sticking behaviour of pellets, as well as imparts strength to the pellets (resulting increasing compressive strength, tumbler, abrasion and shatter index) but decreases the porosity. The low basicity pellets were found predominantly oxide-bonded, while the high basicity pellets were mostly slag-bonded. This means that the pellet should be fired at sufficiently high enough temperature to generate liquid phases to get the sufficient strength but not so high as to cause the pellets to stick to each other. The obtained properties of these fluxed pellets were compared with the properties of iron ore lump and pellets, which are being used conventionally in the blast furnace for production of iron and steel.

  14. Effects of Sodium Citrate on the Ammonium Sulfate Recycled Leaching of Low-Grade Zinc Oxide Ores

    Science.gov (United States)

    Yang, Kun; Li, Shi-wei; Zhang, Li-bo; Peng, Jin-hui; Ma, Ai-yuan; Wang, Bao-bao

    2016-03-01

    The effects of sodium citrate on ammonium sulfate recycled leaching of low-grade zinc oxide ores were studied. By applying various kinds of detection and analysis techniques such as chemical composition analysis, chemical phase method, scanning electron microscopy and energy dispersive spectrum (SEM/EDS), X-ray diffraction (XRD) and Fourier-transforming infrared spectrum (FT-IR), zinc raw ore, its leaching slag and the functional mechanism of sodium citrate were investigated. Based on a comprehensive analysis, it can be concluded that in contrast to hemimorphite (Zn4Si2O7(OH)2 · H2O), amorphous smithsonite (ZnCO3) and zinc silicate (Zn2SiO4) prove to be refractory phases under ammonium sulfate leaching, while sodium citrate has a better chelating action with the refractory phases, resulting in a higher zinc leaching rate. Under conditions of [NH3]/[NH3]T molar ratio being 0.5, [NH3]T being 7.5 mol/L, [Na3C6H5O7] being 0.2 mol/L, S/L ratio being 1:5, temperature being 303 K, holding time being 1 h in each of the two stages, and stirring rate being 300 rpm, the leaching rate of zinc reached 93.4%. In this article, sulfate ammonium recycled technology also reveals its unique advantage in processing low-grade zinc oxide ores accompanied by high silicon and high alkaline gangue.

  15. Evaluation of the effectiveness of the filtration leaching for uranium recovery from uranium ore

    Directory of Open Access Journals (Sweden)

    Bolat Uralbekov

    2015-09-01

    Full Text Available The physical and chemical processes taking place in filtration leaching of uranium from uranium ore sample by sulphuric acid solution have been studied by modern physico-chemical methods (X-ray diffraction, scanning electron spectroscopy, electron probe microanalysis, optical emission spectroscope, ICP OES. Column leaching test was carried out for ore samples obtained from a uranium in-situ leaching (ISL mining site using deluted sulphuricacid to study the evolution of various elements concentration in the pregnant leach solution. It has been shown that the uranium in pregnant solutions appears by dissolution of calcium and magnesium carbonates and uranium minerals as well. It was found the decreasing of filtration coefficient from 0.099 m day-1 to 0.082 m day-1, due to the presence of mechanical and chemical mudding. Partial extraction of uranium (85% from the ore has been explained by the slow diffusion of sulfuric acid to the uranium minerals locates in the cracks of silicate minerals. It was concluded that the studied uranium ore sample according to adverse geotechnical parameters is not suitable for uranium extraction by filtration leaching.

  16. ALTERNATIVE BINDERS TO BENTONITE FOR IRON ORE PELLETIZING: PART I: EFFECTS ON PHYSICAL AND MECHANICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Osman Sivrikaya

    2014-07-01

    Full Text Available The use of conventional bentonite binder is favorable in terms of mechanical and metallurgical pellet properties, however, because of its acid constituents bentonite is considered as impurity especially for iron ores with high acidic content. Therefore, alternative binders to bentonite have been tested. Organic binders are the most studied binders and they yield pellets with good wet strength; they fail in terms of preheated and fired pellet strengths. This study was conducted to investigate how insufficient pellet strengths can be improved when organic binders are used as binder. The addition of a low-melting temperature and slag bonding/strength increasing constituent (free in acidic contents into pellet feed was proposed. Addition of boron compounds such as colemanite, tincal, borax pentahydrate, boric acid together with organic binders such as CMC, starch, dextrin and some organic based binders, into iron oxide pellet was tested. Wet and thermally treated pellet physical-mechanical qualities (balling - moisture content - size - shape - drop number - compressive strengths - porosity - dustiness were determined. The results showed that good quality wet, dry, preheated and fired pellets can be produced with combined binders (an organic binder plus a boron compound when compared with bentonite-bonded pellets. While organic binders provided sufficient wet and dry pellet strengths, the boron compounds provided the required preheated and fired pellet strengths at even lower firing temperature. Especially, the contribution of boron compound addition is most pronounced for hematite pellets which do not have strengthening mechanism through oxidation like magnetite pellets during firing. Therefore, addition of boron compound is beneficial to recover the low physical-mechanical qualities of pellets produced with organic binders through slag bonding mechanism. Furthermore, lowering the firing temperature thanks to low-melting boron compounds will be cost-effective

  17. Microbial reduction of iron ore

    Science.gov (United States)

    Hoffmann, Michael R.; Arnold, Robert G.; Stephanopoulos, Gregory

    1989-01-01

    A process is provided for reducing iron ore by treatment with microorganisms which comprises forming an aqueous mixture of iron ore, microorganisms operable for reducing the ferric iron of the iron ore to ferrous iron, and a substrate operable as an energy source for the microbial reduction; and maintaining the aqueous mixture for a period of time and under conditions operable to effect the reduction of the ore. Preferably the microorganism is Pseudomonas sp. 200 and the reduction conducted anaerobically with a domestic wastewater as the substrate. An aqueous solution containing soluble ferrous iron can be separated from the reacted mixture, treated with a base to precipitate ferrous hydroxide which can then be recovered as a concentrated slurry.

  18. Effect of Tourmaline-Doped on the Far Infrared Emission of Iron Ore Tailings Ceramics.

    Science.gov (United States)

    Liu, Jie; Meng, Junping; Liang, Jinsheng; Zhang, Hongchen; Gu, Xiaoyang

    2016-04-01

    Iron ore tailings as secondary resources have been of great importance to many countries in the world. Their compositions are similar to that of infrared emission ceramics, but there are few reports about it. In addition, tourmaline has high infrared emission properties due to its unique structure. With the purpose of expanding functional utilization of iron ore tailings, as well as reducing the production cost of far infrared ceramics, a new kind of far infrared emission ceramics was prepared by using iron ore tailings, calcium carbonate, silica, and natural tourmaline. The ceramics powders were characterized by Fourier transform infrared spectroscope, X-ray diffraction and scanning electron microscopy, respectively. The results show that after being sintered at 1065 °C, the percentage of pseudobrookite and lattice strain of samples increased with increasing the elbaite content. Furthermore, the added tourmaline was conducive to the densification sintering of ceramics. The appearance of Li-O vibration at 734.73 cm-1, as well as the strengthened Fe-O vibration at 987.68 cm-1 were attributed to the formation of Li0.375Fe1.23Ti1.4O5 solid solution, which led the average far infrared emissivity of ceramics increase from 0.861 to 0.906 within 8-14 µm.

  19. Processing of lateritic ores

    Energy Technology Data Exchange (ETDEWEB)

    Collier, D.E.; Ring, R.J. [Environment Division, Australian Nuclear Science and Technology Organisation, Menai, New South Wales (Australia); McGill, J.; Russell, H. [Energy Resources of Australia Ltd., Ranger Mine, Jabiru, Northern Territory (Australia)

    2000-07-01

    Highly weathered or lateritic ores that contain high proportions of fine clay minerals present specific problems when they are processed to extract uranium. Of perhaps the greatest significance is the potential of the fine minerals to adsorb dissolved uranium (preg-robbing) from leach liquors produced by processing laterites or blends of laterite and primary ores. These losses can amount to 25% of the readily soluble uranium. The clay components can also restrict practical slurry densities to relatively low values in order to avoid rheology problems in pumping and agitation. The fine fractions also contribute to relatively poor solid-liquid separation characteristics in settling and/or filtration. Studies at ANSTO have characterised the minerals believed to be responsible for these problems and quantified the effects of the fines in these types of ores. Processing strategies were also examined, including roasting, resin-in-leach and separate leaching of the laterite fines to overcome potential problems. The incorporation of the preferred treatment option into an existing mill circuit is discussed. (author)

  20. Effects of High Pressure ORE Grinding on the Efficiency of Flotation Operations

    Science.gov (United States)

    Saramak, Daniel; Krawczykowska, Aldona; Młynarczykowska, Anna

    2014-10-01

    This article discusses issues related to the impact of the high pressure comminution process on the efficiency of the copper ore flotation operations. HPGR technology improves the efficiency of mineral resource enrichment through a better liberation of useful components from waste rock as well as more efficient comminution of the material. Research programme included the run of a laboratory flotation process for HPGR crushing products at different levels of operating pressures and moisture content. The test results showed that products of the high-pressure grinding rolls achieved better recoveries in flotation processes and showed a higher grade of useful components in the flotation concentrate, in comparison to the ball mill products. Upgrading curves have also been marked in the following arrangement: the content of useful component in concentrate the floatation recovery. All upgrading curves for HPGR products had a more favourable course in comparison to the curves of conventionally grinded ore. The results also indicate that various values of flotation recoveries have been obtained depending on the machine operating parameters (i.e. the operating pressure), and selected feed properties (moisture).

  1. ALTERNATIVE BINDERS TO BENTONITE FOR IRON ORE PELLETIZING : PART II : EFFECTS ON METALLURGICAL AND CHEMICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Osman Sivrikaya

    2014-07-01

    Full Text Available This study was started to find alternative binders to bentonite and to recover the low preheated and fired pellet mechanical strengths of organic binders-bonded pellets. Bentonite is considered as a chemical impurity for pellet chemistry due to acid constituents (SiO2 and Al2O3. Especially addition of silica-alumina bearing binders is detrimental for iron ore concentrate with high acidic content. Organic binders are the most studied binders since they are free in silica. Although they yield pellets with good wet strength; they have found limited application in industry since they fail to give sufficient physical and mechanical strength to preheated and fired pellets. It is investigated that how insufficient preheated and fired pellet strengths can be improved when organic binders are used as binder. The addition of a slag bonding/strength increasing constituent (free in acidic contents into pellet feed to provide pellet strength with the use of organic binders was proposed. Addition of boron compounds such as colemanite, tincal, borax pentahydrate, boric acid together with organic binders such as CMC, starch, dextrin and some organic based binders, into magnetite and hematite pellet mixture was tested. After determining the addition of boron compounds is beneficial to recover the low pellet physical and mechanical qualities in the first part of this study, in this second part, metallurgical and chemical properties (reducibility - swelling index – microstructure – mineralogy - chemical content of pellets produced with combined binders (an organic binder plus a boron compound were presented. The metallurgical and chemical tests results showed that good quality product pellets can be produced with combined binders when compared with the bentonite-bonded pellets. Hence, the suggested combined binders can be used as binder in place of bentonite in iron ore pelletizing without compromising the pellet chemistry.

  2. The Effects of Chlorhexidine and Persica Mouthwashes on Colonization of Streptococcus mutans on Fixed Orthodontics O-rings

    Science.gov (United States)

    Saffari, Fereshteh; Danesh Ardakani, Mohammad; Zandi, Hengameh; Heidarzadeh, Hamed; Moshafi, Mohammad Hassan

    2015-01-01

    Statement of the Problem Fixed orthodontic appliances predispose patients to dental caries. Use of mouthrinses has been introduced as the effective way for reducing dental plaque accumulation. Purpose The aim of this study was to compare the effects of Persica mouthwash and Chlorhexidine (CHX) on colonization of Streptococcus mutans (S. mutans) on fixed orthodontic O-rings. Materials and Method Thirty patients with fixed orthodontic appliances and proper oral hygiene were randomly provided by CHX and Persica and trained to use these mouthwashes according to the manufacturer’s instruction. Sampling was carried out right before and 4 weeks after mouthrinsing treatment. The mean amounts of S. mutans colonies in these groups were compared. Results Comparison of S. mutans colonization within each group revealed both mouthrinses to be efficient. However, this difference was found to be significant only in CHX group. Conclusion Persica cannot be a good alternative mouthwash and patients on orthodontic treatment are still recommended to use CHX. PMID:25759859

  3. Advances in research of sulphide ore textures and their implications for ore genesis

    Institute of Scientific and Technical Information of China (English)

    GU Lianxing; ZHENG Yuanchuan; TANG Xiaoqian; WU Changzhi; HU Wenxuan

    2006-01-01

    Important advances in research of sulphide ore textures in recent years have deepened our understanding of ore genesis of related mineral deposits. Pressure solution of sulphide minerals has been suggested as a mechanism for remobilization of ore materials,whereas pressure solution of the gangues is believed to raise the grade of the primary ores. We have known that precipitation of base metal sulphides from fluids prefers crystal and crack surfaces of pyrite to form overgrowth. Therefore, pyrite-bearing embryo beds in a sedimentary sequence can be acted as effective crystal seed beds and are favorable for fluid overprinting to form huge statabound deposits. Texture studies of various sulphides can be used to interpret the entire history of sedimentation, diagenesis, deformation and metamorphism of the ores. The study of chalcopyrite disease in sphalerite has brought about the idea of zone refining, and given a new explanation to metal zonation in massive sulphide deposits. Ductile shearing of sulphide ores may form ore mylonites, which will become oreshoots enriched in Cu, Au and Ag during late-stage fluid overprinting. Despite that various modern analytical techniques are being rapidly developed, ore microscopy remains to be an unreplaceable tool for ore geologists. Combined with these modern techniques, this tool will help accelerate the development of theories on ore genesis.

  4. Effects of barium chlorine treatment of uranium ore on /sup 222/Rn emanation and /sup 226/Ra leachability from mill tailings

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, S.A.; Church, S.L.; Whicker, F.W.

    1985-01-01

    The purpose of this laboratory study was to investigate the effectiveness of barium chloride treatment of uranium ore on /sup 222/Rn emanation from mill tailings, /sup 226/Ra level in waste-water, and the leachability of radium from tailings. It has been shown that barium sulfate is an excellent carrier for radium and that barium sulfate crystals have high retention capacity for radon gas produced by radium trapped within the lattice. Ground uranium ore from a mine in Wyoming was mixed with water to form a 1:1 ratio before barium and potassium chlorides were added at concentrations of 0, 10, 25, 50, and 100 mg per liter of slurry. The ore was then subjected to a simulated mill process using sulfuric acid leaching. The liquid representing tailings pond water was separated and analyzed for /sup 226/Ra and the solid fraction, representing mill tailings, was tested for radon emanation and the leachability of radium by deionized water. This study suggests that barium treatment of uranium ore prior to sulfuric acid leaching could be effective in reducing radon emanation from tailings and also in reducing the /sup 226/Ra concentration of waste-water. Leachability of radium from treated tailings was markedly reduced.

  5. Beneficiation of Iranian magnesite ores by reverse flotation process and its effects on shaped and unshaped refractories properties

    Indian Academy of Sciences (India)

    S Aslani; H R Samim Bani Hashemi; F Arianpour

    2010-12-01

    The primary aim of this study is the beneficiation of magnesite ores from eastern part of Iran by reverse flotation process. For this purpose, the mineralogical and microstructural characteristics of the as-received and the processed ores from Iranian Afzal Abad mine were established. The liberation degree of ore was estimated at about 75 m. Then the as-received ore and the processed one were dead burnt to produce magnesia aggregates. These aggregates were used for production of shaped and unshaped refractories. Bricks and monolithic ramming mixes which were made from these aggregates were analysed and their mechanical and physical properties, studied. The results of this investigation showed that the application of reverse flotation process on the magnesite ore of eastern part of Iran causes an acceptable reduction on the amount of its siliceous inclusions, so that this type of the processed magnesia is suitable for utilization in the refractory industries. The magnesia produced from the original calcined ore was not suitable for this industry due to the presence of unacceptable amount of siliceous inclusions, which make its properties very poor.

  6. The effect of human resource practices on psychological contracts at an iron ore mining company in South Africa

    Directory of Open Access Journals (Sweden)

    Caren B. Scheepers

    2011-02-01

    Full Text Available Orientation: Human resource practices influence the psychological contract between employee and employer and, ultimately, organisational performance. Research purpose: The objective of this study was to examine the effect of human resource practices on the types of psychological contracts in an iron ore mining company in South Africa empirically. Motivation for the study: Although there have been a number of conceptual studies on the effect of human resource practices on psychological contracts, there has been no effort to synthesise the links between these contracts and various human resource practices systematically. This study endeavoured to provide quantitative evidence to verify or refute conceptual studies on this relationship. Its findings could inform human resource strategies and, ultimately, the prioritisation of human resource practices to improve the cost-effective allocation of resources.Research design, approach and method: The researchers administered two questionnaires. These were Rousseau’s Psychological Contract Inventory (2000 and the Human Resource Practices Scale of Geringer, Colette and Milliman (2002. The researchers conducted the study with 936 knowledge workers at an iron ore mining company in South Africa. They achieved a 32% response rate.Main findings: The findings showed that most participants have relational contracts with the organisation. Another 22% have balanced contracts, 8% have transitional contracts whilst only 1% have transactional contracts. The study suggests that there are relationships between these psychological contracts and specific human resource practices. The study found that training and development was the most important human resource practice for developing relational and balanced contracts. Employees thought that they contributed more than their employer did to the relationship. The researchers developed a model to illustrate the influence of the various human resource practices on

  7. Effects of High-Temperature Preoxidation on the Titanomagnetite Ore Structure and Reduction Behaviors in Fluidized Bed

    Science.gov (United States)

    Sun, Haoyan; Adetoro, Ajala Adewole; Pan, Feng; Wang, Zhen; Zhu, Qingshan

    2017-02-01

    The oxidation behaviors of South Africa (SA) titanomagnetite (TTM) and its effects on the gas solid reduction in the fluidized bed were investigated on the basis of the two-stage short process of direct reduction-electric arc furnace (DR-EAF) melting separation. The results showed that the oxidation phase transformations in the high-temperature range from 1073 K to 1223 K (800 °C to 950 °C) can be divided into two typical processes: with the fast generation of pseudobrookite and with the maghemite generation at the initial stage. The reduction efficiency for SA TTM was improved by the preoxidation treatment, mainly because of the dissociation of titania-ferrous oxides to the easy reducible hematite. However, at a preoxidation temperature higher than 1173 K (900 °C), the improving effect became weak, due to high-temperature sintering and the larger crystallite size of oxidation products. There is an extreme value of the preoxidation influence, and the optimum preoxidation time is different for various temperatures. The reduction metallization degree of SA TTM can be relatively improved by 14.5 and 4.5 pct for the first and second reduction steps, respectively, by 1173 K (900 °C) preoxidation with an optimum time of 30 minutes. Finally, the equilibrium relationship between the metallization degree and the gas reduction potential for TTM ore with preoxidation treatment was built.

  8. Mobility factors of cracked ore in vibrating-ore draw shafts

    Institute of Scientific and Technical Information of China (English)

    WU Ai-xiang; JIANG Li-chun; CHEN Jia-sheng

    2005-01-01

    The mobile factors of cracked ore in vibrating-ore draw shafts were analyzed. The results show that the mobile coefficient of cracked ores will be mainly influenced by the combination of ore physical factors if the structure dimension and parameters of vibrating ore-draw shafts are sure. It decreases with increasing the cohesion, lump content, lump size and powder content and increases with increasing the porosity. The coefficient decreases with increasing the moisture content, but increases after the moisture content reaches a certain value. Uniform grain leads to better mobility, non-uniform grain leads to worse mobility. The value of the mobile coefficient should be in a range of 0.31.1 when designing the vibrating ore-draw shafts. According to correlation degree of grey system theory, the effects of factors on the mobility of cracked ore are given in the weight decreasing consequence as follows: moisture content, lump content, distribution of grain size, lump size, porosity, cohesion and powder ore content. It is unreasonable to neglect any one because the values of their weights are not obvious.

  9. Mechanism of mechanical activation for sulfide ores

    Institute of Scientific and Technical Information of China (English)

    HU Hui-ping; CHEN Qi-yuan; YIN Zhou-lan; HE Yue-hui; HUANG Bai-yun

    2007-01-01

    Structural changes for mechanically activated pyrite, sphalerite, galena and molybdenite with or without the exposure to ambient air, were systematically investigated using X-ray diffraction analysis(XRD), particle size analysis, gravimetrical method, X-ray photo-electron spectroscopy(XPS) and scanning electron microscopy(SEM), respectively. Based on the above structural changes for mechanically activated sulfide ores and related reports by other researchers, several qualitative rules of the mechanisms and the effects of mechanical activation for sulfide ores are obtained. For brittle sulfide ores with thermal instability, and incomplete cleavage plane or extremely incomplete cleavage plane, the mechanism of mechanical activation is that a great amount of surface reactive sites are formed during their mechanical activation. The effects of mechanical activation are apparent. For brittle sulfide ores with thermal instability, and complete cleavage plane, the mechanism of mechanical activation is that a great amount of surface reactive sites are formed, and lattice deformation happens during their mechanical activation. The effects of mechanical activation are apparent. For brittle sulfide ores with excellent thermal stability, and complete cleavage plane, the mechanism of mechanical activation is that lattice deformation happens during their mechanical activation. The effects of mechanical activation are apparent. For sulfide ores with high toughness, good thermal stability and very excellent complete cleavage plane, the mechanism of mechanical activation is that lattice deformation happens during their mechanical activation, but the lattice deformation ratio is very small. The effects of mechanical activation are worst.

  10. Effects of simulated deposition of acid mist and iron ore particulate matter on photosynthesis and the generation of oxidative stress in Schinus terebinthifolius Radii and Sophora tomentosa L.

    Science.gov (United States)

    Kuki, Kacilda Naomi; Oliva, Marco Antônio; Pereira, Eduardo Gusmão; Costa, Alan Carlos; Cambraia, José

    2008-09-15

    Particulate matter is a natural occurrence in the environment, but some industries, such as the iron ore sector, can raise the total amount of particles in the atmosphere. This industry is primarily a source of iron and sulfur dioxide particulates. The effects of the pollutants from the iron ore industries on representatives of restinga vegetation in a Brazilian coastal ecosystem were investigated using physiological and biochemical measures. Two species, Schinus terebinthifolius and Sophora tomentosa, were exposed to simulated deposition of acid mist and iron ore particulate matter in acrylic chambers in a greenhouse. Parameters such as gas exchange, fluorescence emission, chlorophyll content, total iron content, antioxidant enzyme activity and malondialdehyde content were assessed in order to evaluate the responses of the two species. Neither treatment was capable of inducing oxidative stress in S. terebinthifolius. Nevertheless, the deposition of iron ore particulates on this species increased chlorophyll content, the maximum quantum efficiency of photosystem II and the electron transport rate, while iron content was unaltered. On the other hand, S. tomentosa showed a greater sensitivity to the treatments. Plants of S. tomentosa that were exposed to acid mist had a decrease in photosynthesis, while the deposition of iron particulate matter led to an increase in iron content and membrane permeability of the leaves. The activities of antioxidant enzymes, such as catalases and superoxide dismutase, were enhanced by both treatments. The results suggested that the two restinga species use different strategies to overcome the stressful conditions created by the deposition of particulate matter, either solid or wet. It seems that while S. terebinthifolius avoided stress, S. tomentosa used antioxidant enzyme systems to partially neutralize oxidative stress. The findings also point to the potential use of S. tomentosa as a biomarker species under field conditions.

  11. Application of a water cooling treatment and its effect on coal-based reduction of high-chromium vanadium and titanium iron ore

    Science.gov (United States)

    Yang, Song-tao; Zhou, Mi; Jiang, Tao; Guan, Shan-fei; Zhang, Wei-jun; Xue, Xiang-xin

    2016-12-01

    A water cooling treatment was applied in the coal-based reduction of high-chromium vanadium and titanium (V-Ti-Cr) iron ore from the Hongge region of Panzhihua, China. Its effects on the metallization ratio ( η), S removal ratio ( R S), and P removal ratio ( R P) were studied and analyzed on the basis of chemical composition determined via inductively coupled plasma optical emission spectroscopy. The metallic iron particle size and the element distribution of Fe, V, Cr, and Ti in a reduced briquette after water cooling treatment at 1350°C were determined and observed via scanning electron microscopy. The results show that the water cooling treatment improved the η, R S, and R P in the coal-based reduction of V-Ti-Cr iron ore compared to those obtained with a furnace cooling treatment. Meanwhile, the particle size of metallic iron obtained via the water cooling treatment was smaller than that of metallic iron obtained via the furnace cooling treatment; however, the particle size reached 70 μm at 1350°C, which is substantially larger than the minimum particle size required (20 μm) for magnetic separation. Therefore, the water cooling treatment described in this work is a good method for improving the quality of metallic iron in coal-based reduction and it could be applied in the coal-based reduction of V-Ti-Cr iron ore followed by magnetic separation.

  12. Application of a water cooling treatment and its effect on coal-based reduction of high-chromium vanadium and titanium iron ore

    Institute of Scientific and Technical Information of China (English)

    Song-tao Yang; Mi Zhou; Tao Jiang; Shan-fei Guan; Wei-jun Zhang; and Xiang-xin Xue

    2016-01-01

    A water cooling treatment was applied in the coal-based reduction of high-chromium vanadium and titanium (V–Ti–Cr) iron ore from the Hongge region of Panzhihua, China. Its effects on the metallization ratio (η), S removal ratio (RS), and P removal ratio (RP) were studied and analyzed on the basis of chemical composition determined via inductively coupled plasma optical emission spectroscopy. The metallic iron particle size and the element distribution of Fe, V, Cr, and Ti in a reduced briquette after water cooling treatment at 1350°C were determined and observed via scanning electron microscopy. The results show that the water cooling treatment improved theη,RS, and RP in the coal-based reduction of V–Ti–Cr iron ore compared to those obtained with a furnace cooling treatment. Meanwhile, the particle size of metallic iron obtained via the water cooling treatment was smaller than that of metallic iron obtained via the furnace cooling treatment; however, the particle size reached 70μm at 1350°C, which is substantially larger than the minimum particle size required (20μm) for mag-netic separation. Therefore, the water cooling treatment described in this work is a good method for improving the quality of metallic iron in coal-based reduction and it could be applied in the coal-based reduction of V–Ti–Cr iron ore followed by magnetic separation.

  13. Cost-effective integrated strategy for the fabrication of hard-magnet barium hexaferrite powders from low-grade barite ore

    Science.gov (United States)

    Sanad, M. M. S.; Rashad, M. M.

    2016-09-01

    Ultrafine barium hexaferrite (BaFe12O19) powders were synthesized from the metallurgical extracts of low-grade Egyptian barite ore via a co-precipitation route. Hydrometallurgical treatment of barite ore was systematically studied to achieve the maximum dissolution efficiency of Fe (~99.7%) under the optimum conditions. The hexaferrite precursors were obtained by the co-precipitation of BaS produced by the reduction of barite ore with carbon at 1273 K and then dissolved in diluted HCl and FeCl3 solution at pH 10 using NaOH as a base; the product was then annealed at 1273 K in an open atmosphere. The effect of Fe3+/Ba2+ molar ratio and the addition of hydrogen peroxide (H2O2) on the phase structure, crystallite size, morphology, and magnetic properties were investigated by X-ray diffraction, scanning electron microscopy, and vibrating sample magnetometry. Single-phase BaFe12O19 powder was obtained at an Fe3+/Ba2+ molar ratio of 8.00. The formed powders exhibited a hexagonal platelet-like structure. Good maximum magnetization (48.3 A·m2·kg-1) was achieved in the material prepared at an Fe3+/Ba2+ molar ratio of 8.0 in the presence of 5% H2O2 as an oxidizer and at 1273 K because of the formation of a uniform, hexagonal-shaped structure.

  14. Effect of Addition of Mill Scale on Sintering of Iron Ores

    Science.gov (United States)

    Wang, Zhe; Pinson, David; Chew, Sheng; Monaghan, Brian J.; Pownceby, Mark I.; Webster, Nathan A. S.; Rogers, Harold; Zhang, Guangqing

    2016-10-01

    Iron-rich (65 to 70 pct total Fe) mill scale generated during processing by steel mills can be recycled by using it as a ferrous raw material in the sintering process. The effect of mill scale addition on the phase formation of sintered specimens from an industrial sinter blend containing 0 to 15 wt pct mill scale was examined, and the mineral phases formed during sintering under various conditions ( T = 1523 K to 1598 K [1250 °C to 1325 °C] and gas compositions of pO2 = 0.5, 5 and 21 kPa) were quantitatively measured. For samples sintered in air (pO2 = 21 kPa), there was negligible effect of mill scale addition on the phases formed. The oxidation of the mill scale was complete, and phases such as Silico-Ferrite of Calcium and Aluminum (SFCA), SFCA-I, and hematite dominated. Under lower oxygen partial pressures (pO2 = 0.5 or 5 kPa), and throughout the temperature range examined, the mill scale was converted to magnetite, with the extent of reaction controlled by the hematite-magnetite conversion kinetics. When sintered in the gas mixture with pO2 = 5 kPa, an increase in the mill scale content from 0 to 15 wt pct resulted in a decrease of hematite and total SFCA phases and a corresponding increase in the amount of magnetite which formed. The oxidation of wustite in mill scale to magnetite decreased the local partial pressure of O2 and increased sintering temperature, which promoted the decomposition of hematite.

  15. Selective Flocculation of Dilband Iron Ore, Pakistan

    Directory of Open Access Journals (Sweden)

    Muhammad Ishaque Abro

    2011-04-01

    Full Text Available Selective flocculation for long is known as one of the beneficiation techniques applicable to the concentration of finely disseminated ores. The success of this technique is based on the selective adsorption of an organic polymer on the mineral particles to be flocculated. In present study beneficiation of finely disseminated Dilband iron ore using selective flocculation has been attempted. The effect of pH, sodium silicate (Na2SiO3, sodium hexametaphosphate (Na2OP2O5, sodium trypolyphosphate (Na5P3O10, ethylediaminetretracetae (NaCH2-CH2N, flocculant doses, and flocculant mixing method on the selective adsorption of corn starch on hematite, the chief iron mineral, was studied comprehensively. Improvement in grade was assessed by XRF analysis of the flocculation products. The selective flocculation upgraded the ore from 52% hematite (i.e. 39% Fe to 60% hematite (i.e. 45% Fe with an average hematite recovery of 15%. Appreciable increase in ore grade with sufficiently poor recovery suggested that selective flocculation process is not adequate beneficiating technique to upgrade the Dilband iron ore due to heavily intergrowth of impurities.

  16. EFFECTS OF RE-ROUTING OF CONCENTRATE STREAMS IN THE INDUSTRIAL SCALE FROTH FLOTATION OF LOWER GROUP 6 PGM ORE

    Directory of Open Access Journals (Sweden)

    EMMANUEL M. SHAI

    2016-12-01

    Full Text Available The Lower Group 6 (LG6 platinum group of metals (PGM ore was subjected to batch and continuous industrial froth flotation with and without concentrate streams re-routing. The batch test indicated that the ore has a recovery of about 69%.However, the average PGM recovery before and after rougher stage rerouting during plant scale tests were 41.5 and 64.5%, respectively. The rerouting of roughers 4 to 6 streams thus successfully improved recovery by 23%.Similar results were also obtained for both PGM and PGM 4E recoveries in both cleaner and re-cleaner stages re-routing. The results obtained thus strongly suggest that the circuit PGM recovery was optimized by the re-routing. It was however further observed that the PGM grade decreased significantly while the chromium content of oxide origin increased in the concentrates after re-routing. The optimum grade and recovery combination for each metal value will thus have to be determined by the plant based on the Net Smelter Return (NSR analyses that incorporate both grade and recovery results.

  17. A study of the distribution of rare-metals in kuroko-type ore

    Energy Technology Data Exchange (ETDEWEB)

    Murao, S. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience]|[Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Sie, S.H.; Suter, G.F. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

    1996-12-31

    We have performed PIXE analysis of kuroko-type ore from the JADE hydrothermal site of the Okinawa Trough, Japan using the proton microprobe (PIXEPROBE). We analysed five kinds of ores dredged from the sea floor: (I) barite ore with small sulfide dissemination; (2) sphalerite-pyrite chimney; (3) pyrite ore; (4) sulfide veinlets in strongly altered rock; and (5) pyrite megacrystals in strongly altered rock. The analyses revealed that the trace element distribution is regulated by the occurrence mode of the ore, and within each ore, by the crystal structure. The distribution suggests that the hydrothermal system for kuroko ore formation is quite heterogeneous and its chemistry is controlled by local factors such as difference in temperature, and that in-situ PIXE analyses are essential for effective beneficiation strategy for the rare-metals from kuroko-type ore. (authors). 10 refs., 1 tab.

  18. Excited response of granular ores in vibrating field

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The dynamical theory was utilized to probe into the law of the excited response of granular ores generated by the exciting action of exciter and the influence of wave propagation in vibrating field. The exciter with double axes was presented as an example, and the principle of exciter and its mathematical expression of the excitation force were given. The granular ores have viscidity and damping speciality, on the basis of which the motion equation of excited response of ores was established and the approximate expression of mode-displacement by harmonic excitation and the steady effect solution of coordinate response were deduced. Utilizing the step-by-step integration method, the recursion relation matrix of displacement, velocity and acceleration of the excited response of ores were obtained, and the computational flow chart and a computational example were given. The results show that the excited response can change the dynamical character and the flowing characteristic of granular ores.

  19. Complexing and hydrothermal ore deposition

    CERN Document Server

    Helgeson, Harold C

    1964-01-01

    Complexing and Hydrothermal Ore Deposition provides a synthesis of fact, theory, and interpretative speculation on hydrothermal ore-forming solutions. This book summarizes information and theory of the internal chemistry of aqueous electrolyte solutions accumulated in previous years. The scope of the discussion is limited to those aspects of particular interest to the geologist working on the problem of hydrothermal ore genesis. Wherever feasible, fundamental principles are reviewed. Portions of this text are devoted to calculations of specific hydrothermal equilibriums in multicompone

  20. High-temperature performance prediction of iron ore fines and the ore-blending programming problem in sintering

    Institute of Scientific and Technical Information of China (English)

    Bing-ji Yan; Jian-liang Zhang; Hong-wei Guo; Ling-kun Chen; Wei Li

    2014-01-01

    The high-temperature performance of iron ore fines is an important factor in optimizing ore blending in sintering. However, the application of linear regression analysis and the linear combination method in most other studies always leads to a large deviation from the desired results. In this study, the fuzzy membership functions of the assimilation ability temperature and the liquid fluidity were proposed based on the fuzzy mathematics theory to construct a model for predicting the high-temperature performance of mixed iron ore. Comparisons of the prediction model and experimental results were presented. The results illustrate that the prediction model is more accurate and effec-tive than previously developed models. In addition, fuzzy constraints for the high-temperature performance of iron ore in this research make the results of ore blending more comparable. A solution for the quantitative calculation as well as the programming of fuzzy constraints is also introduced.

  1. A comparison between standard methods and structural nested modelling when bias from a healthy worker survivor effect is suspected: an iron-ore mining cohort study.

    Science.gov (United States)

    Björ, Ove; Damber, Lena; Jonsson, Håkan; Nilsson, Tohr

    2015-07-01

    Iron-ore miners are exposed to extremely dusty and physically arduous work environments. The demanding activities of mining select healthier workers with longer work histories (ie, the Healthy Worker Survivor Effect (HWSE)), and could have a reversing effect on the exposure-response association. The objective of this study was to evaluate an iron-ore mining cohort to determine whether the effect of respirable dust was confounded by the presence of an HWSE. When an HWSE exists, standard modelling methods, such as Cox regression analysis, produce biased results. We compared results from g-estimation of accelerated failure-time modelling adjusted for HWSE with corresponding unadjusted Cox regression modelling results. For all-cause mortality when adjusting for the HWSE, cumulative exposure from respirable dust was associated with a 6% decrease of life expectancy if exposed ≥15 years, compared with never being exposed. Respirable dust continued to be associated with mortality after censoring outcomes known to be associated with dust when adjusting for the HWSE. In contrast, results based on Cox regression analysis did not support that an association was present. The adjustment for the HWSE made a difference when estimating the risk of mortality from respirable dust. The results of this study, therefore, support the recommendation that standard methods of analysis should be complemented with structural modelling analysis techniques, such as g-estimation of accelerated failure-time modelling, to adjust for the HWSE. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Study of the combined effects of smoking and inhalation of uranium ore dust, radon daughters and diesel oil exhaust fumes in hamsters and dogs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cross, F.T.; Palmer, R.F.; Filipy, R.E.; Busch, R.H.; Stuart, B.O.

    1978-09-01

    Exposure to particulates from uranium ore dust and diesel exhaust soot provoked inflammatory and proliferative responses in lungs. Also exposure to radon and radon daughters yielded increased occurrences of bronchiolar epithelial hyperplasia and metaplastic changes of alveolar epithelium. The data suggest that this cellular change is also a precursor of premalignant change in hamsters. The authors suggest an animal model other than the hamster based on two observations: (1) the Syrian golden hamster has been shown to be highly refractory to carcinoma induction; and (2) that when exposed to realistic levels of agents in life-span exposure regimens, the hamster does not develop lesions. Dog studies with cigarette smoke exposure showed mitigating effects on radon daughter induced respiratory tract cancer. Two reasons are suggested although no empirical evidence was gathered. A strict comparison of human and animal exposures and interpolative models are not possible at this time. (PCS)

  3. Pb, Cu botanogeochemical anomalies and toxic effects on plant cells in Pb-Zn (Sn) ore fields, Northeast Guangxi Autonomous Region, China

    Institute of Scientific and Technical Information of China (English)

    SONG Ci'an; LEI Liangqi; YANG Qijun

    2007-01-01

    In the Lingchuan-Daoping and Xinglu Pb-Zn ore fields in northern and eastern Guangxi Autonomous Region, Pb, Cu botanogeochemical anomalies may be ascribed to the excessive amounts of Pb and Cu taken up by the root system of plants, such as China fir (Cunninghamia lanceolata Lamb. Hook), mason pine (Pinus massoniana Lamb.) and bracken fern (Pteridium aquilinum var. latiusculum). Under transmission electron microscope (TEM), the excess Pb, Cu in the leaf cells of the plants are present as high electron-density substances, which were precipitated in the leaf cells, causing phytotoxic effects by deforming and injuring cellular tissues. The sorts of toxic elements accumulating in the leaf cells are consistent with those of the botanogeochemically anomalous elements in the polluted soil where the plants grow. In addition, the plants may also be capable of resisting the invasion of excess Cu (and Pb) .

  4. Hunting for Iron Ore Bargains

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    One of China’s leading steel mills has turned to smaller mines for long-term, lowcost iron ore supplies china’s oldest steel producer is looking to South America to fulfill its iron ore needs in the face of rising prices from

  5. The production and use of citric acid for the removal of potassium from the iron ore concentrate of the Sishen Iron Ore Mine, South Africa

    Directory of Open Access Journals (Sweden)

    Peter J. Williams

    2010-04-01

    Full Text Available The depletion of the richer iron ore worldwide has made it necessary to process lower quality iron ore. Certain substances, such as potassium, contained within the lower quality iron ore, have a detrimental effect on the smelting process during steel manufacturing. Therefore, international steel-making companies charge penalties when purchasing iron ore concentrates containing high concentrations of potassium. To date, lower quality iron ore has been blended with high quality iron ore in an attempt to alleviate the potassium concentrations in the export iron ore; however, the ratio of low quality iron ore to high quality iron ore is increasing, thereby becoming an escalating problem within the economic functioning of the Sishen Iron Ore Mine. It has, therefore, become necessary to develop an economically viable and environmentally friendly process to reduce the high potassium concentrations contained in the iron ore concentrate of the Sishen Iron Ore Mine. In this study, we compared solid substrate and submerged fermentation using Aspergillus niger for the production of citric acid, which is used for the chemical leaching of potassium from the iron ore concentrate. It was found that submerged fermentation proved to be more economical and efficient, producing a maximum citric acid concentration of 102.3 g/L in 96 h of fermentation. ‘Heap leaching’ simulation experiments were found to be uneconomical, due to the required addition of fungal growth medium every 5 days as a result of growth factor depletion within this time; however, this process removed 17.65% of the potassium from the iron ore concentrate. By contrast, chemical leaching of potassium from the iron ore concentrate proved to be most efficient when using a 1 mol citric acid leaching solution at 60 ºC, removing 23.53% of the potassium contained within the iron ore concentrate. Therefore, the most economical and efficient process for the removal of potassium from the iron

  6. Fabrication of cost effective iron ore slime ceramic membrane for the recovery of organic solvent used in coke production

    Institute of Scientific and Technical Information of China (English)

    V.Singh; N.K.Meena; A.K.Golder; C.Das

    2016-01-01

    Improvement of coking properties of sub-bituminous coal (A) and bituminous coal (B) was done using blended organic solvents,namely,n-methyl-2-pyrrolidinone (NMP) and ethylenediamine (EDA).Various solvent blends were employed for the coal extraction under the total reflux condition.A low-cost ceramic membrane was fabricated using industrial waste iron ore slime of M/s TATA steel R&D,Jamshedpur (India) to separate out the dissolved coking fraction from the solvent-coal mixture.Membrane separations were carried out in a batch cell,and around 75 % recovered NMP was reused.The fractionated coal properties were determined using proximate and ultimate analyses.In the case of bituminous coal,the ash and sulfur contents were decreased by 99.3 % and 79.2 %,respectively,whereas,the carbon content was increased by 23.9 % in the separated coal fraction.Three different cleaning agents,namely deionized water,sodium dodecyl sulphate and NMP were used to regain the original membrane permeability for the reusing.

  7. Geology and ore deposits of the Pioche district, Nevada

    Science.gov (United States)

    Westgate, L.G.; Knopf, Adolph

    1932-01-01

    which was discovered accidentally during the prospecting of the fissure veins. The ore deposits of the district comprise three groups (1) silver-bearing fissure veins in quartzite; (2) silver-bearing mineralized granite porphyry; (3) replacement deposits in limestone and dolomite. All of them appear to have been formed at about the same time, in the epoch of mineralization that occurred shortly after the intrusion of the granitic rocks and their allied dikes of granite porphyry and lamprophyre. The entire present output of the district is coming from the replacement deposits in limestone and dolomite, but exploratory work is still in progress on the fissure veins and mineralized porphyry. The replacement deposits include both replacement fissure veins and stratiform ("bedded") replacement deposits. The replacement fissure veins dip steeply and cut across the bedding of the carbonate rocks in which they are inclosed. They are thoroughly oxidized, as deep at least as 1,100 feet, for on none of them have the mine workings penetrated to water level, and they are highly manganiferous and limonitic and low in silica. At-certain horizons stratiform replacement deposits extend out as lateral branches from the fissure veins. Deposits of this kind occur mainly in the Mendha limestone, Highland Peak limestone, and Lyndon limestone. The stratigraphic range is therefore at least 5,500 feet, and as some of the fissure veins extend down through the underlying Pioche shale the indicated range may exceed 6,500 feet. The most notable representatives of the replacement fissure veins are at the Bristol mine, where they yield silver-bearing copper-leadzinc ores. So far unique among the ore bodies of the district is the pipe of wad and pyrolusite ore at the Jackrabbit mine, the periphery of the pipe consisting of a girdle of extraordinarily coarse white calcite spar produced by the recrystallization of the surrounding limestones. The stratiform replacement deposits that are attracting most

  8. Carbothermal Upgrading of the Awaso Bauxite Ore using Waste ...

    African Journals Online (AJOL)

    Michael

    2015-06-01

    Jun 1, 2015 ... Ore using Waste Pure Water Sachets as Reductant”, Ghana Mining Journal, Vol. ... content) and the emergence of low grade bauxite with high iron oxide content calls for ... effects on the alumina extraction process (Lu et al.,.

  9. Leaching hydrodynamics of weathered elution-deposited rare earth ore

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Both porosity (φ) and permeability (k) of the weathered elution-deposited rare earth ores are basic hydrodynamic parameters for RE leaching. The relationship between k and φ of two typical rare earth ores of South China in the packed bed was investigated by measuring the flow (Q) under various leaching pressure difference (Δp). The experimental results show that the relationship between k and φ is unique, moreover the relationship between Q and Δp is in accord with the Darcy's law. The effects of the type of ores, the leaching reagents and its concentration, the granule ore size on the leaching permeability have also been investigated. It is demonstrated that kH (for heavy RE ore, kH=35.98 mm2)>kM-H (for middle-heavy RE ore,kM-H=28.50 mm2), whereas k(NH4NO3)>k(NH4Cl)>k[(NH4)2SO4], and the k value increases with increasing leaching reagents concentration and granule ore size(k0.60~0.75 mm=99.96 mm2,k0.125~0.60 mm=11.83 mm2, k0.074~0.125 mm=0.84 mm2).

  10. Effective adsorption of phosphate from wastewaters by big composite pellets made of reduced steel slag and iron ore concentrate.

    Science.gov (United States)

    Wang, Hongjuan; Shen, Shaobo; Liu, Longhui; Ji, Yilong; Wang, Fuming

    2015-01-01

    In order to remove phosphate from wastewater, a large plastic adsorption column filled with big phosphate-adsorbing pellets with diameters of 10 mm, heated by electromagnetic induction coils, was conceived. It was found that the prepared big pellets, which were made of reduced steel slag and iron ore concentrate, contain magnetic Fe and Fe3O4. The thermodynamics and kinetics of adsorption of phosphate from synthetic wastewaters on the pellets were studied in this work. The phosphate adsorption on the pellets followed three models of Freundlich, Langmuir and Dubinin-Kaganer-Radushkevick. The maximum phosphate adsorption capacity Qmax of the pellets were 2.46, 2.74 and 2.77 mg/g for the three temperatures of 20°C, 30°C and 40°C, respectively, based on the Langmuir model. The apparent adsorption energies were -12.9 kJ/mol for the three temperatures. It implied that ion exchange was the main mechanism involved in the adsorption processes. The adsorbed phosphate existed on the pellet surface mainly in the form of Fe3(PO4)2. A reduction pre-treatment of the pellet precursor with H2 greatly enhanced pellet adsorption for phosphate. The adsorption kinetics is better represented by a pseudo-first-order model. The adsorbed phosphate amounts were similar for both real and synthetic wastewaters under similar adsorption conditions. The percentage of adsorbed phosphate for a real wastewater increased with increasing pellet concentration and reached 99.2% at a pellet concentration of 64 (g/L). Some specific phosphate adsorption mechanisms for the pellets were revealed and the pellets showed the potential to efficiently adsorb phosphate from a huge amount of real wastewaters in an industrial scale.

  11. Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore

    Institute of Scientific and Technical Information of China (English)

    Nurul A. Yunus; Mohd H. Ani; Hamzah M. Salleh; Rusila Z. A. Rashid; Tomohiro Akiyama; Hadi Purwanto; Nur E. F. Othman

    2014-01-01

    Beneficiation of Malaysian iron ore is becoming necessary as iron resources are depleting. However, the upgrading process is challenging because of the weak magnetic properties of Malaysian iron ore. In this study, bio-char derived from oil palm empty fruit bunch (EFB) was utilized as an energy source for reduction roasting. Mixtures of Malaysian iron ore and the bio-char were pressed into briquettes and subjected to reduction roasting processes at 873-1173 K. The extent of reduction was estimated on the basis of mass loss, and the mag-netization of samples was measured using a vibrating sample magnetometer (VSM). When reduced at 873 K, the original goethite-rich ore was converted into hematite. An increase in temperature to 1073 K caused a significant conversion of hematite into magnetite and enhanced the magnetic susceptibility and saturation magnetization of samples. The magnetic properties diminished at 1173 K as the iron ore was par-tially reduced to wustite. This reduction roasting by using the bio-char can assist in upgrading the iron ore by improving its magnetic proper-ties.

  12. Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore

    Science.gov (United States)

    Yunus, Nurul A.; Ani, Mohd H.; Salleh, Hamzah M.; Rashid, Rusila Z. A.; Akiyama, Tomohiro; Purwanto, Hadi; Othman, Nur E. F.

    2014-04-01

    Beneficiation of Malaysian iron ore is becoming necessary as iron resources are depleting. However, the upgrading process is challenging because of the weak magnetic properties of Malaysian iron ore. In this study, bio-char derived from oil palm empty fruit bunch (EFB) was utilized as an energy source for reduction roasting. Mixtures of Malaysian iron ore and the bio-char were pressed into briquettes and subjected to reduction roasting processes at 873-1173 K. The extent of reduction was estimated on the basis of mass loss, and the magnetization of samples was measured using a vibrating sample magnetometer (VSM). When reduced at 873 K, the original goethite-rich ore was converted into hematite. An increase in temperature to 1073 K caused a significant conversion of hematite into magnetite and enhanced the magnetic susceptibility and saturation magnetization of samples. The magnetic properties diminished at 1173 K as the iron ore was partially reduced to wustite. This reduction roasting by using the bio-char can assist in upgrading the iron ore by improving its magnetic properties.

  13. The enhancement effect of pre-reduction using zero-valent iron on the solidification of chromite ore processing residue by blast furnace slag and calcium hydroxide.

    Science.gov (United States)

    Li, Jinchunzi; Chen, Zhonglin; Shen, Jimin; Wang, Binyuan; Fan, Leitao

    2015-09-01

    A bench scale study was performed to assess the effectiveness of the solidification of chromite ore processing residue (COPR) by blast furnace slag and calcium hydroxide, and investigate the enhancement effect of pre-reduction using zero-valent iron (ZVI) on the solidification treatment. The degree of Cr immobilization was evaluated using the Toxicity Characteristic Leaching Procedure (TCLP) as well as the solid waste-extraction procedure for leaching toxicity-sulfuric acid & nitric acid method (Chinese standard HJ/T299-2007). Strength tests and semi-dynamic leaching tests were implemented to investigate the potential for reusing the final treatment product as a readily available construction material. The experimental results showed that the performance of pre-reduction/solidification (S/S) was superior to that of solidification alone. After pre-reduction, all of the S/S treated COPR samples met the TCLP limit for total Cr (5 mg L(-1)), whereas the samples with a COPR content below 40% met the pollution control limit of bricks and building block products (Chinese standard HJ/T 301-2007) produced with COPR for total Cr (0.3 mg L(-1)). At the same time, all of the S/S treated specimens tested were suitable for utilization at certain levels. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Dose calculations for intakes of ore dust

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, R.S

    1998-08-01

    This report describes a methodology for calculating the committed effective dose for mixtures of radionuclides, such as those which occur in natural radioactive ores and dusts. The formulae are derived from first principles, with the use of reasonable assumptions concerning the nature and behaviour of the radionuclide mixtures. The calculations are complicated because these `ores` contain a range of particle sizes, have different degrees of solubility in blood and other body fluids, and also have different biokinetic clearance characteristics from the organs and tissues in the body. The naturally occurring radionuclides also tend to occur in series, i.e. one is produced by the radioactive decay of another `parent` radionuclide. The formulae derived here can be used, in conjunction with a model such as LUDEP, for calculating total dose resulting from inhalation and/or ingestion of a mixture of radionuclides, and also for deriving annual limits on intake and derived air concentrations for these mixtures. 15 refs., 14 tabs., 3 figs.

  15. Effect of Amount of Carbon on the Reduction Efficiency of Iron Ore-Coal Composite Pellets in Multi-layer Bed Rotary Hearth Furnace (RHF)

    Science.gov (United States)

    Mishra, Srinibash; Roy, Gour Gopal

    2016-08-01

    The effect of carbon-to-hematite molar ratio has been studied on the reduction efficiency of iron ore-coal composite pellet reduced at 1523 K (1250 °C) for 20 minutes in a laboratory scale multi-layer bed rotary hearth furnace (RHF). Reduced pellets have been characterized through weight loss measurement, estimation of porosity, shrinkage, qualitative and quantitative phase analysis by XRD. Performance parameters such as the degree of reduction, metallization, carbon efficiency, productivity, and compressive strength have been calculated to compare the process efficacy at different carbon levels in the pellets. Pellets with optimum carbon-to-hematite ratio (C/Fe2O3 molar ratio = 1.66) that is much below the stoichiometric carbon required for direct reduction of hematite yielded maximum reduction, better carbon utilization, and productivity for all three layers. Top layer exhibited maximum reduction at comparatively lower carbon level (C/Fe2O3 molar ratio 2.33). Correlation between degree of reduction and metallization indicated non-isothermal kinetics influenced by heat and mass transfer in multi-layer bed RHF. Compressive strength of the partially reduced pellet with optimum carbon content (C/Fe2O3 molar ratio = 1.66) showed that they could be potentially used as an alternate feed in a blast furnace or any other smelting reactor.

  16. [Effect of temperature on the rate of oxidation of pyrrhotite-rich sulfide ore flotation concentrate and the structure of the acidophilic chemolithoautotrophic microbial community].

    Science.gov (United States)

    Moshchanetskii, P V; Pivovarova, T A; Belyi, A V; Kondrat'eva, T F

    2014-01-01

    Oxidation of flotation concentrate of a pyrrhotite-rich sulfide ore by acidophilic chemolithoautotrophic microbial communities at 35, 40, and 45 degrees C was investigated. According to the physicochemical parameters of the liquid phase of the pulp, as well as the results of analysis of the solid residue after biooxidation and cyanidation, the community developed at 40 degrees C exhibited the highest rate of oxidation. The degree of gold recovery at 35, 40, and 45 degrees C was 89.34, 94.59, and 83.25%, respectively. At 40 degrees C, the highest number of microbial cells (6.01 x 10(9) cells/mL) was observed. While temperature had very little effect on the species composition of microbial communities, except for the absence of Leptospirillum ferriphilum at 35 degrees C, the shares of individual species in the communities varied with temperature. Relatively high numbers of Sulfobacillus thermosulfidooxidans, the organism oxidizing iron and elemental sulfur at higher rates than other acidophilic chemolithotrophic species, were observed at 40 degrees C.

  17. Toxic effects of iron ore tailings and the response of watercress from tailings at high concentrations of Fe, Zn and Mn. [Nasturtium officinale; Brassica chinensis

    Energy Technology Data Exchange (ETDEWEB)

    Wong, M.H.

    1985-01-01

    Watercress Nasturtium officinale was found growing on the iron ore tailings at Ma On Shan which had high total metal contents (Fe 46,792 ..mu..g g/sup -1/, Mn 2063 ..mu..g g/sup -1/ and Zn 423 ..mu..g g/sup -1/). Samples of the plant were collected from this heavy metal contaminated site (Ma On Shan), a cultivated area (Tai Po) and non-cultivated land (Lam Tsuen). It was found that the heavy metal contents (Fe, Zn, Mn) of the plant tissue collected from Ma On Shan were significantly higher than those collected from the other two sites. Seeds of Brassica chinensis used to study the effect of water extracts of soil samples collected from the three sites on seed germination and root elongation showed that 5, 10, and 15% (w/v) extracts reduced seed germination and root elongation of the crop. When the three different populations of N. officinale collected from the three sites were tested for metal tolerance by examination of root growth in a series of concentrations of manganese, iron, and zinc separately, it was found that the tailings population had significantly higher values of tolerance to each of three metals despite the fact it had only been growing on the site for three years.

  18. Effect of surfactants on the removal of magnesium impurities from phosphate ore%表面活性剂对磷矿脱镁过程的影响

    Institute of Scientific and Technical Information of China (English)

    陈宇; 王琪; 崔鹏

    2013-01-01

    The effect of surfactants on removal of magnesium impurities from phosphate ore with a mixture of phosphoric and sulfuric acid was studied. The results showed that the removal of magnesium impurities was inhibited by anionic surfactant (SDBS and SDS) ;the removal of magnesium impurities was promoted and the loss of P2O5 was increased by cationic surfactant ( CTAC and CTAB) ;the removal of magnesium impurities was promoted and the loss of P2O5 was decreased by nonionic surfactant (PEG).%在磷硫混酸浸提的磷矿脱镁过程中,加入不同类型的表面活性,考察其对脱镁率及磷损失率的影响.结果表明,阴离子表面活性剂十二烷基苯磺酸钠和十二烷基磺酸钠的加入不利脱镁反应的进行;阳离子表面活性剂十六烷基三甲基溴化铵和十六烷基三甲基氯化铵,在促进脱镁反应的同时增加了磷损失;非离子表面活性剂聚乙二醇有利于抑制脱镁过程中的磷损失,并有效地促进了脱镁反应的进行.

  19. A geochemical assessment of possible lunar ore formation

    Science.gov (United States)

    Haskin, Larry A.; Colson, Russell O.; Vaniman, David

    The Moon apparently formed without appreciable water or other relatively volatile materials. Interior concentrations of water or other volatile substances appear to be extremely low. On Earth, water is important to the genesis of nearly all types of ores. Thus, some have reasoned that only abundant elements would occur in ore concentrations. The definition and recognition of ores on the Moon challenge the imaginations and the terrestrial perceptions of ore bodies. Lunar ores included solar-wind soaked soils, which contain abundant but dilute H, C, N, and noble gases (including He-3). Oxygen must be mined; soils contain approximately 45 percent (wt). Mainstream processes of rock formation concentrated Si, Mg, Al, Fe, and Ca, and possibly Ti and Cr. The highland surface contains approximately 70 percent (wt) feldspar (mainly CaAl2Si2O8), which can be separated from some highland soils. Small fragments of dunite were collected; dunite may occur in walls and central peaks of some craters. Theoretical extensions of observations of lunar samples suggest that the Moon may have produced ores of trace elements. Some small fragments have trace-element concentrations 104 times higher than the lunar average, indicating that effective geochemical separations occurred; processes included fractional crystallization, silicate immiscibility, vaporization and condensation, and sulfide metamorphism. Operations of these processes acting on indigenous materials and on meteoritic material in the regolith could have produced ores. Infalling carbonaceous meteorites and comets have added water and hydrocarbons that may have been cold-trapped. Vesicles in basalts, pyroclastic beads, and reported transient events suggest gag emission from the lunar interior; such gas might concentrate and transport rare elements. Large impacts may disperse ores or produce them through deposition of heat at depth and by vaporization and subsequent condensation. The main problem in assessing lunar resources is

  20. Effect of Gradually Temperature Rising and Reduction of Ore in Lumpy Zone on the Permeability%高炉块状带矿石逐渐升温还原对料层透气性影响

    Institute of Scientific and Technical Information of China (English)

    赵宏博; 程树森; 白永强; 马金芳; 万雷; 王尉平

    2011-01-01

    为了模拟高炉块状带内矿石还原过程对料层透气性的影响,根据实际高炉料层的运动升温及煤气成分的变化情况,设计了模拟矿石在高炉块状带行程的试验方法,建立了能够实时监测料层压差和矿石还原度的试验装置,给出了矿石逐渐升温还原对料层透气性影响的量化评价指标,并实测了某高炉烧结矿、球团矿、块矿、混合矿石在逐渐升温过程中的料层压差和还原度变化,得出逐渐升温还原后的粉化指标和料层压差增加率具有很好的一致性。与原有的低温还原粉化测试方法相比,该方法更适合用于判断高炉整个块状带内矿石还原对料层透气性的影响,更有利于评价矿石性能对高炉操作的影响。试验还研究了原始粒径、还原失重、还原温度、还原时间、加热、转鼓、泡水对矿石粉化程度的影响。%To simulate the effect of iron ore reduction in lumpy zone on the permeability of stock column in BF,the experimental methods were designed according to the actual movement of burden,temperature distribution and gas compositions.The equipments were built which could monitor the pressure drop of burden column and reduction index of ore at real-time.The evaluating indicators for the effects of gradually temperature rise and reduction of ore on the permeability of burden column were given.The pressure drop of burden column and the reduction index of sinter,pellet,lump ore and mixed ores were tested.It is found that the degradation index after gradually temperature rise and reduction has good correlation with the increment rate of pressure drop of burden column,which is more proper to judge the effect of ore reduction in the entire lumpy zone in BF on the permeability of burden column and to evaluate the effect of ore property on BF operation than conventional low temperature test of reduction degradation.The influences of testing factors on the ore degradation were also

  1. Uranium mill ore dust characterization

    Energy Technology Data Exchange (ETDEWEB)

    Knuth, R.H.; George, A.C.

    1980-11-01

    Cascade impactor and general air ore dust measurements were taken in a uranium processing mill in order to characterize the airborne activity, the degree of equilibrium, the particle size distribution and the respirable fraction for the /sup 238/U chain nuclides. The sampling locations were selected to limit the possibility of cross contamination by airborne dusts originating in different process areas of the mill. The reliability of the modified impactor and measurement techniques was ascertained by duplicate sampling. The results reveal no significant deviation from secular equilibrium in both airborne and bulk ore samples for the /sup 234/U and /sup 230/Th nuclides. In total airborne dust measurements, the /sup 226/Ra and /sup 210/Pb nuclides were found to be depleted by 20 and 25%, respectively. Bulk ore samples showed depletions of 10% for the /sup 226/Ra and /sup 210/Pb nuclides. Impactor samples show disequilibrium of /sup 226/Ra as high as +-50% for different size fractions. In these samples the /sup 226/Ra ratio was generally found to increase as particle size decreased. Activity median aerodynamic diameters of the airborne dusts ranged from 5 to 30 ..mu..m with a median diameter of 11 ..mu..m. The maximum respirable fraction for the ore dusts, based on the proposed International Commission on Radiological Protection's (ICRP) definition of pulmonary deposition, was < 15% of the total airborne concentration. Ore dust parameters calculated for impactor duplicate samples were found to be in excellent agreement.

  2. Research on Magnesite Ore Purification

    Directory of Open Access Journals (Sweden)

    Berisha, K.

    2009-12-01

    Full Text Available Magnesite ore, consisting mainly of magnesite, MgCO3 is a chief mineral source for production of high quality refractory materials based on highly pure MgO. However, the presence of calcium and silicium mineral impurities in the ore adversely affect refractoriness. The removal of silicate minerals is now a routine process but it is not so for calcium minerals impurities. In this work, the new method for the removal of calcium mineral impurities from magnesite ore has been investigated. It is based on extraction of calcium hydroxide from the calcined hydrated ore with the solution of magnesium nitrate. The results show that it is possible to remove up to 65–83 % of calcium oxide (CaO within five minutes, and up to 88–95 % within an hour. The process itself is complex, but mainly under mass transfer control. It is possible to use waste materials produced as fertilizer in agriculture thus helping in environmental protection.

  3. Integrated biomarker assessment of the effects of tailing discharges from an iron ore mine using blue mussels (Mytilus spp.).

    Science.gov (United States)

    Brooks, Steven J; Harman, Christopher; Hultman, Maria T; Berge, John Arthur

    2015-08-15

    The blue mussel (Mytilus spp.) has been used to assess the potential biological effects of the discharge effluent from the Sydvaranger mine, which releases its tailings into Bøk fjord at Kirkenes in the north of Norway. Metal bioaccumulation and a suite of biomarkers were measured in mussels positioned for 6 weeks at varying distances from the discharge outlet. The biomarkers used included: stress on stress (SS); condition index (CI); cellular energy allocation (CEA); micronuclei formation (MN); lysosomal membrane stability (LMS), basophilic cell volume (VvBAS); and neutral lipid (NL) accumulation. The individual biomarkers were integrated using the integrated biological response (IBR/n) index. The accumulation of Fe was significantly higher in mussels located closer to the discharge outlet, indicating that these mussels had been exposed to the suspended mine effluent. The IBR/n results were in good agreement with the location of the mussels in relation to the distance from the discharge outlet and expected exposure to the mine effluent. Several biomarkers showed responses resulting in higher IBR/n values of analysed mussels within a 3 km distance from the tailing discharge. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Virtual phosphorus ore requirement of Japanese economy.

    Science.gov (United States)

    Matsubae, Kazuyo; Kajiyama, Jun; Hiraki, Takehito; Nagasaka, Tetsuya

    2011-08-01

    Phosphorus is indispensable for agricultural production. Hence, the consumption of imported food indirectly implies the import of phosphorus resources. The global consumption of agricultural products depends on a small number of ore-producing countries. For sustainable management of phosphorus resources, the global supply and demand network should be clarified. In this study, we propose the virtual phosphorus ore requirement as a new indicator of the direct and indirect phosphorus requirements for our society. The virtual phosphorus ore requirement indicates the direct and indirect demands for phosphorus ore transformed into agricultural products and fertilizer. In this study, the virtual phosphorus ore requirement was evaluated for the Japanese economy in 2005. Importantly, the results show that our society requires twice as much phosphorus ore as the domestic demand for fertilizer production. The phosphorus contained in "eaten" agricultural products was only 12% of virtual phosphorus ore requirement.

  5. Effect of H{sub 2}S on the catalytic decomposition of tar and ammonia with dolomite and sintered iron ore in synthetic gasification gas

    Energy Technology Data Exchange (ETDEWEB)

    Hepola, J. [VTT Energy, Espoo (Finland)

    1996-12-31

    The toluene-decomposing activity of calcined dolomite was not affected by the H{sub 2}S content of synthetic gasification gas. Iron was active with respect to toluene and ammonia at metallic state. The increase of the H{sub 2}S content of synthetic gasification gas (0 - 500 ppmv) decreased the tar-decomposing activity but not the ammonia- decomposing activity of sintered iron ore. (author) (12 refs.)

  6. Gamma Spectrometric Analysis of Iron Ore Samples of Arak, Iran

    Directory of Open Access Journals (Sweden)

    Reza Pourimani

    2016-09-01

    Full Text Available Introduction Iron ore is one of the most important natural raw materials that is widely used for manufacturing iron and steel. This type of ore contains various amounts of radionuclides; thus, exposing workers handling their extraction, transportation, and processing to radiation. Materials and Methods In this study, 12 ore samples (each mass weighing about 2 kg were collected from the iron ore mining areas of Arak region, Iran. The specific activities of 226Ra, 232Th, and 40K were determined usinggamma-ray spectrometry method employing high-purity germanium (HPGe detector. Results The specific activities of 226Ra, 232Th, and 40K in samples were 9.39-271.70 Bq/kg, -3 Sv/y suggested in International Commission of Radiological Protection (ICRP Publication 82. Conclusion The gamma ray spectrometric analysis showed that the specific activities of natural radionuclides in samples, except for limonite ore, were within the worldwide range. The effective dose received by workers was much lower than the maximum acceptable value (1000 μSv/y; therefore, the level of radiations in this mine had no adverse consequences for public health.

  7. Complex sulphide-barite ore leaching in ferric chloride solution

    Directory of Open Access Journals (Sweden)

    Miroslav Sokić

    2016-06-01

    Full Text Available The results of research on the leaching process of complex sulphide-barite ore were presented in this paper. The leaching process was carried out in a laboratory autoclave by ferric chloride solution. Considering that those minerals are represented in complex structural-textural relationships, it is not possible to extract lead, zinc and copper minerals from ore by flotation methods. The obtained results confirmed possibility of the ore processing directly, by chemical methods. The effect of temperature, time and oxygen partial pressure on the lead, zinc and copper dissolution was studied. The maximal leaching degree was achieved at 100 °C and amount of 91.5 % for Pb, 96.1 % for Zn and 60.7 % for Cu. Leaching at temperatures above 100 °C is impractical.

  8. Investigation of chemical suppressants for inactivation of sulfide ores

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to investigate the effective control method of spontaneous combustion in the mining of sulfide ore deposits, This paper presents the testing results of several selected chemicals (water glass, calcium chloride, calcium oxide, magnesium oxide and their composites) as oxidation suppressants for sulfide ores. A weight increment scaling method was used to measure suppressant performance, and this method proved to be accurate, simple and convenient. Based on a large number of experiments, the test results show that four types of chemical mixtures demonstrate a good performance in reducing the oxidation rate of seven active sulfide ore samples by up to 27% to 100% during an initial 76 d period. The mixtures of water glass mixed with calcium chloride and magnesium oxide mixed with calcium chloride can also act as fire suppressants when used with fire sprinkling systems.

  9. Idea of Identification of Copper Ore with the Use of Process Analyser Technology Sensors

    Science.gov (United States)

    Jurdziak, Leszek; Kaszuba, Damian; Kawalec, Witold; Król, Robert

    2016-10-01

    The Polish resources of the copper ore exploited by the KGHM S.A. underground mines are considered as one of the most complex in the world and - consequently - the most difficult to be processed. The ore consists of three lithology forms: dolomites, shales and sandstones but in different proportions which has a significant impact on the effectiveness of the grinding and flotation processes. The lithological composition of the ore is generally recognised in-situ but after being mined it is blended on its long way from various mining fields to the processing plant by the complex transportation system consisting of belt conveyors with numerous switching points, ore bunkers and shafts. Identification of the lithological composition of the ore being supplied to the processing plant should improve the adjustments of the ore processing machinery equipment aiming to decrease the specific processing (mainly grinding) energy consumption as well as increase the metal recovery. The novel idea of Process Analyser Technology (PAT) sensors - information carrying pellets, dropped into the transported or processed bulk material which can be read directly when needed - is investigated for various applications within the DISIRE project (a part of the SPIRE initiative, acting under the Horizon2020 framework program) and here is adopted for implementing the annotation the transported copper ore for the needs of ore processing plants control. The identification of the lithological composition of ore blended on its way to the processing plant can be achieved by an information system consisting of pellets that keep the information about the original location of the portions of conveyed ore, the digital, geological database keeping the data of in-situ lithology and the simulation models of the transportation system, necessary to evaluate the composition of the blended ore. The assumptions of the proposed solution and the plan of necessary in-situ tests (with the special respect to harsh

  10. Novel Binders and Methods for Agglomeration of Ore

    Energy Technology Data Exchange (ETDEWEB)

    S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

    2006-12-31

    Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily. Primary examples of this are copper heap leaching, where there are no binders that will work in the acidic environment encountered in this process, and advanced ironmaking processes, where binders must function satisfactorily over an extraordinarily large range of temperatures (from room temperature up to over 1200 C). As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching and advanced primary ironmaking. This project has identified several acid-resistant binders and agglomeration procedures that can be used for improving the energy efficiency of heap leaching, by preventing the ''ponding'' and ''channeling'' effects that currently cause reduced recovery and extended leaching cycle times. Methods have also been developed for iron ore

  11. Isolation and identification of iron ore-solubilising fungus

    Directory of Open Access Journals (Sweden)

    Damase Khasa

    2010-09-01

    Full Text Available Potential mineral-solubilising fungi were successfully isolated from the surfaces of iron ore minerals. Four isolates were obtained and identified by molecular and phylogenetic methods as close relatives of three different genera, namely Penicillium (for isolate FO, Alternaria (for isolates SFC2 and KFC1 and Epicoccum (for isolate SFC2B. The use of tricalcium phosphate (Ca3(PO42in phosphate-solubilising experiments confirmed isolate FO as the only phosphate solubiliser among the isolated fungi. The bioleaching capabilities of both the fungus and its spent liquid medium were tested and compared using two types of iron ore materials, conglomerate and shale, from the Sishen Iron Ore Mine as sources of potassium (K and phosphorus (P. The spent liquid medium removed more K (a maximum of 32.94% removal, from conglomerate, than the fungus (a maximum of 21.36% removal, from shale. However, the fungus removed more P (a maximum of 58.33% removal, from conglomerate than the spent liquid medium (a maximum of 29.25% removal, from conglomerate. The results also indicated a potential relationship between the removal of K or P and the production of organic acids by the fungus. A high production of gluconic acid could be related to the ability of the fungus to reduce K and P. Acetic, citric and maleic acids were also produced by the fungus, but in lower quantities. In addition, particle size and iron ore type were also shown to have significant effects on the removal of potassium and phosphorus from the iron ore minerals. We therefore conclude that the spent liquid medium from the fungal isolate FO can potentially be used for biobeneficiation of iron ore minerals.

  12. Novel Binders and Methods for Agglomeration of Ore

    Energy Technology Data Exchange (ETDEWEB)

    S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

    2006-12-31

    Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily. Primary examples of this are copper heap leaching, where there are no binders that will work in the acidic environment encountered in this process, and advanced ironmaking processes, where binders must function satisfactorily over an extraordinarily large range of temperatures (from room temperature up to over 1200 C). As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching and advanced primary ironmaking. This project has identified several acid-resistant binders and agglomeration procedures that can be used for improving the energy efficiency of heap leaching, by preventing the ''ponding'' and ''channeling'' effects that currently cause reduced recovery and extended leaching cycle times. Methods have also been developed for iron ore

  13. Measurement of moisture in mill feed ore

    Energy Technology Data Exchange (ETDEWEB)

    Timm, A.R.; Moench, P.; Moisel, E. (Council for Mineral Technology, Randburg (South Africa))

    1985-04-01

    The control of the moisture in the feed to a mill is very important for efficient mill operation. Water is added continuously to the ore fed to a mill to maintain a suitable mix of ore and moisture in the mill. However, problems arise because of the large variation in the moisture content of the ore, which affects the efficiency of the grind. If too little moisture is present, the mill is unable to grind the ore finely enough, creating instead a thick 'porridge' that causes the mill to choke up. On the other hand, too much moisture results in inefficient grinding because the ore is flushed through the mill too quickly. Several techniques are available for measuring moisture and Mintek undertook an investigation in an attempt to develop a reliable robust moisture meter suitable for monitoring the moisture content of ore, which include the following: neutron backscattering, infrared absorption, microwaves, capacitance and moisture as a function of conductivity.

  14. Market Structure Differences Impacting Australian Iron Ore and Metallurgical Coal Industries

    Directory of Open Access Journals (Sweden)

    Kurt Lawrence

    2015-07-01

    Full Text Available Steelmaking relies on iron ore and metallurgical coal as main ingredients, the trade of which is hypothesized to theoretically change in tandem. However, strong correlation is not evident in historical trade prices of steelmaking inputs. To determine causes to this occurrence, the market factors that influence the Australian iron ore and metallurgical coal industries were studied. Data was collected over the past decade for worldwide resource production and trade quantities of crude steel, iron ore, and metallurgical coal. The data was analysed to reveal trends, allowing examination of the macroeconomic trade of metallurgical coal and iron ore with relation to worldwide and country specific steel production. It was determined that the influential growth of China’s steel production has spurred the growth of worldwide iron ore demand, which was met with increased production and supply, from Australia. The increased metallurgical coal demand has been met with increased production within China locally. Measures of supply elasticity were created for worldwide iron ore and metallurgical coal trade, where comparisons between Australia’s industries to the relevant greatest competitor were examined. The results, along with respective resource production data, highlighted the elevated competitive position that Australian iron ore producers enjoy compared to metallurgical coal producers. Trade characteristics revealed the different market structures that iron ore and metallurgical coal industries operate in, prompting a discussion of the effects these markets have on the two Australian industries.

  15. Technology of Polish copper ore beneficiation – perspectives from the past experience

    Directory of Open Access Journals (Sweden)

    Wieniewski Andrzej

    2016-01-01

    Full Text Available The paper describes the main types of existing copper deposits in the world and the most common enrichment technologies. The characteristic elements of the current flowsheet of the Polish ore beneficiation were discussed together with the reasons for using them. The paper presents a perspective flowsheet based on more than 50-years of experience in beneficiation of Polish copper ore. The main elements of proposed technology are: leaving in justified cases the division of ore into fractions of increased sandstone and carbonate ores content, flotation in the milling circuit as part of the effective preparation of the ore to rougher flotation, intensive rougher flotation, classic cleaning system, processing of the middlings with grinding system in new type mills, classification and flotation with outlet of final tailings.

  16. Evolution of ore deposits on terrestrial planets

    Science.gov (United States)

    Burns, R. G.

    1991-01-01

    Ore deposits on terrestrial planets materialized after core formation, mantle evolution, crustal development, interactions of surface rocks with the hydrosphere and atmosphere, and, where life exists on a planet, the involvement of biological activity. Core formation removed most of the siderophilic and chalcophilic elements, leaving mantles depleted in many of the strategic and noble metals relative to their chondritic abundances. Basaltic magma derived from partial melting of the mantle transported to the surface several metals contained in immiscible silicate and sulfide melts. Magmatic ore deposits were formed during cooling, fractional crystallization and density stratification from the basaltic melts. Such ore deposits found in earth's Archean rocks were probably generated during early histories of all terrestrial planets and may be the only types of igneous ores on Mars. Where plate tectonic activity was prevalent on a terrestrial planet, temporal evolution of ore deposits took place. Repetitive episodes of subduction modified the chemical compositions of the crust and upper mantles, leading to porphyry copper and molybdenum ores in calc-alkaline igneous rocks and granite-hosted tin and tungsten deposits. Such plate tectonic-induced mineralization in relatively young igneous rocks on earth may also have produced hydrothermal ore deposits on Venus in addition to the massive sulfide and cumulate chromite ores associated with Venusian mafic igneous rock. Sedimentary ore deposits resulting from mechanical and chemical weathering in reducing atmospheres in Archean earth included placer deposits (e.g., uraninite, gold, pyrite ores). Chromite, ilmenite, and other dense unreactive minerals could also be present on channel floors and in valley networks on Mars, while banded iron formations might underlie the Martian northern plains regions. As oxygen evolved in earth's atmosphere, so too did oxide ores. By analogy, gossans above sulfide ores probably occur on Mars

  17. Evolution of ore deposits on terrestrial planets

    Science.gov (United States)

    Burns, R. G.

    1991-01-01

    Ore deposits on terrestrial planets materialized after core formation, mantle evolution, crustal development, interactions of surface rocks with the hydrosphere and atmosphere, and, where life exists on a planet, the involvement of biological activity. Core formation removed most of the siderophilic and chalcophilic elements, leaving mantles depleted in many of the strategic and noble metals relative to their chondritic abundances. Basaltic magma derived from partial melting of the mantle transported to the surface several metals contained in immiscible silicate and sulfide melts. Magmatic ore deposits were formed during cooling, fractional crystallization and density stratification from the basaltic melts. Such ore deposits found in earth's Archean rocks were probably generated during early histories of all terrestrial planets and may be the only types of igneous ores on Mars. Where plate tectonic activity was prevalent on a terrestrial planet, temporal evolution of ore deposits took place. Repetitive episodes of subduction modified the chemical compositions of the crust and upper mantles, leading to porphyry copper and molybdenum ores in calc-alkaline igneous rocks and granite-hosted tin and tungsten deposits. Such plate tectonic-induced mineralization in relatively young igneous rocks on earth may also have produced hydrothermal ore deposits on Venus in addition to the massive sulfide and cumulate chromite ores associated with Venusian mafic igneous rock. Sedimentary ore deposits resulting from mechanical and chemical weathering in reducing atmospheres in Archean earth included placer deposits (e.g., uraninite, gold, pyrite ores). Chromite, ilmenite, and other dense unreactive minerals could also be present on channel floors and in valley networks on Mars, while banded iron formations might underlie the Martian northern plains regions. As oxygen evolved in earth's atmosphere, so too did oxide ores. By analogy, gossans above sulfide ores probably occur on Mars

  18. Up-dated ore composition data (Central ore-field, Kuznetsk Alatau

    Directory of Open Access Journals (Sweden)

    Bushmanov A.

    2016-01-01

    Full Text Available Applying scanning electron microscope (SEM, energy-dispersive microanalyzer and X-ray ray fluorescence microscope the ore mineral composition in Central gold-ore field ore field (Kuznetsk Alatau was investigated. Eleven new minerals were detected in this ore field. The differentiated behavior of mineral formation stages in veinsand near-veined beresites was determined. The composition of native gold was studied, as well as the distribution of trace elements in pyrite.

  19. Hageri alustas oreli taastamisega / Inge Põlma

    Index Scriptorium Estoniae

    Põlma, Inge

    2009-01-01

    1851. aastal eesti orelimeistri Carl Tantoni valmistatud ja 1892. aastal Gustav Terkmanni poolt kohendatud Hageri Lambertuse kiriku oreli restaureerimisest, ekspertiisi tegi rootsi organist Göran Grahn

  20. Effect of CO2 and N2 on microbial community changes during column bioleaching of low-grade high pyrite-bearing chalcocite ore

    Institute of Scientific and Technical Information of China (English)

    陈勃伟; 武彪; 刘兴宇; 温建康

    2015-01-01

    Simulated heap bioleaching of low-grade high pyrite-bearing chalcocite ore was conducted at 40 °C with aeration of CO2 and N2. Ore samples were collected at day 43, 64, 85, 106 and subjected to microbial community analysis by 16S rRNA gene clone library. Phylogenetic analyses of 16S rDNA fragments revealed that the retrieved sequences are mainly related to genus Acidithiobacillus,Leptospirillum andSulfobacillus. Aeration of CO2 and N2 significantly impacted the microbial community composition. When CO2 was aerated, the proportion of genusAcidithiobacillus considerably increased, whereas the proportion of genusLeptospirillum and genusSulfobacillus declined. However, with the aeration of N2, the proportion of genusAcidithiobacillus andLeptospirillum increased, but genusSulfobacillus decreased. When there was no aeration, the microbial community was similar to the inocula with the proportion of genusLeptospirillum mounted. These results indicated that the limitation of oxygen could change the bioleaching microbial community and the aeration of CO2 and N2 was favourable for the growth of sulfur-oxidizer (At. caldus) and iron-oxidizer (L. ferriphilum) respectively, which could be used for the regulation of microorganisms’ role in mineral bioleaching.

  1. The Mechanism on Biomass Reduction of Low-Grade Manganese Dioxide Ore

    Science.gov (United States)

    Zhang, Honglei; Zhu, Guocai; Yan, Hong; Li, Tiancheng; Zhao, Yuna

    2013-08-01

    The mechanism on biomass reduction of low-grade manganese dioxide ore was studied by investigating influence factors on manganese recovery degree, such as the reaction temperature, time, biomass/ore ratio, compositions of biomass, nitrogen flow rate, and particle size of raw materials, and it was further identified through analysis of gas composition in the outlet gas, X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) for the reduced sample. The results show that the reduction process involved mainly two steps: (1) The biomass was first pyrolyzed to release reductive volatiles and (2) manganese oxide ore was reacted with the reductive volatiles. By an analysis of gas composition in the outlet gas, it was also found that the ratio of biomass/ore had an important effect on the reduction mechanism. With a low biomass/ore ratio of 0.5:10, the reducing reaction of the reductive volatiles with manganese dioxide ore proceeded mainly in two stages: (1) The condensable volatiles (tar) released from biomass pyrolysis reacted with manganese oxide ore to produce reductive noncondensable gases such as hydrogen, carbon monoxide, and some light hydrocarbons; and (2) the small molecule gases further participated in the reduction. XRD pattern analysis on the reduced manganese dioxide ore revealed that the process of biomass reduction of manganese ore underwent in phases (MnO2 → Mn3O4 → MnO). The kinetics study showed the reduction process was controlled by a gas-solid reaction between biomass volatiles and manganese oxide ore with activation energy E of 53.64 kJ mol-1 and frequency factor A of 5.45 × 103 minutes-1.

  2. Iron from Zealandic bog iron ore -

    DEFF Research Database (Denmark)

    Lyngstrøm, Henriette Syrach

    2011-01-01

    og geologiske materiale, metallurgiske analyser og eksperimentel arkæologiske forsøg - konturerne af en jernproduktion med udgangspunkt i den sjællandske myremalm. The frequent application by archaeologists of Werner Christensen’s distribution map for the occurrence of bog iron ore in Denmark (1966...... are sketched of iron production based on bog iron ore from Zealand....

  3. The Luster of Iron Ore Prices

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China battles its way out of an iron ore stalemate by finding alternative supplier After months of seesawing, China’s iron ore negotiators appear to be breaking through the tight encirclement of suppliers. On August 17, the China Iron and Steel Association (CISA) announced that Fortescue

  4. Fuzzy Comprehensive Appraisal of Concealed Ore Deposits

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, the transformation from the fuzzy to the accurate process is exemplified by the Jiaodong gold ore deposits concentrated region where the mathematical analysis is used to appraise and forecast regional concealed gold ore deposits. In this sense, this paper presents a new way to the appraisal of the non-traditional mineral resources.

  5. Biomass for iron ore sintering

    Energy Technology Data Exchange (ETDEWEB)

    Zandi, M.; Martinez-Pacheco, M.; Fray, T.A.T. [Corus Research Development & Technology, Rotherham (United Kingdom)

    2010-11-15

    Within an integrated steelworks, iron ore sinter making is an energy intensive process. In recent years, biomass is becoming an attractive alternative source of energy to traditional fossil fuels such as coal. In this study, commercially available biomass materials suited to sinter making have been identified as an alternative source of fuel to coke breeze. Olive residues, sunflower husk pellets, almond shells, hazelnut shells and Bagasse pellets have been characterised and prepared for sintering. A laboratory sinter pot has been employed for studying sintering behaviour of biomass material. On average, the calorific values of selected biomass materials, on a dry basis, are about 65% of dry coke breeze. It was found that less of this energy would be available in sinter making due to the evaporation of some of the volatile matter ahead of the flame front. At a replacement rate of 25%, the crushed sunflower husk pellets showed the closest thermal profile to that of coke breeze alone in the size range of -0.8 to +0.6 mm. A specification of less than 1 mm has been recommended for the studied biomass materials when co-firing biomass with coke breeze for iron ore sintering.

  6. Hemimorphite Ores: A Review of Processing Technologies for Zinc Extraction

    Science.gov (United States)

    Chen, Ailiang; Li, Mengchun; Qian, Zhen; Ma, Yutian; Che, Jianyong; Ma, Yalin

    2016-10-01

    With the gradual depletion of zinc sulfide ores, exploration of zinc oxide ores is becoming more and more important. Hemimorphite is a major zinc oxide ore, attracting much attention in the field of zinc metallurgy although it is not the major zinc mineral. This paper presents a critical review of the treatment for extraction of zinc with emphasis on flotation, pyrometallurgical and hydrometallurgical methods based on the properties of hemimorphite. The three-dimensional framework structure of hemimorphite with complex linkage of its structural units lead to difficult desilicification before extracting zinc in the many metallurgical technologies. It is found that the flotation method is generally effective in enriching zinc minerals from hemimorphite ores into a high-grade concentrate for recovery of zinc. Pure zinc can be produced from hemimorphite or/and willemite with a reducing reagent, like methane or carbon. Leaching reagents, such as acid and alkali, can break the complex structure of hemimorphite to release zinc in the leached solution without generation of silica gel in the hydrometallurgical process. For optimal zinc extraction, combing flotation with pyrometallurgical or hydrometallurgical methods may be required.

  7. 磨矿方法对某硫化矿浮选的影响%Effects of Grinding Measure on Complex Pb/Zn Ore Flotation

    Institute of Scientific and Technical Information of China (English)

    魏以和; 周高云

    2007-01-01

    The flotation performances of a complex Pb/zn ore are investigated by three kinds of mill(steel,stainless and ceramic mill)in laboratory batch flotation testa.It is found that the lead recovery is increased while grinding in a ceramic mill,i.e.a non-ferrous,oxidizing environment.but the selectivity is decreased due to the activation ol sphalerite by copper ions produced via the oxidation of ore.On the contrary,the lead recovery is decreased while grinding in a traditionel iron mill,but the selectivity is increased.The low recovery with iron grinding media is probably caused by the coating of iron oxy-hydroxides on sulphide surfaces.Coarse particles are more sensitive to this kind of depression.%为提高效果,用三种磨机(普通钢磨机,不锈钢磨机和瓷磨机)研究某铅锌矿小型试验的浮选行为.结果表明,瓷磨机(即非铁质磨机)的氧化性磨矿环境可提高铅回收率,但由于矿石氧化产生的铜离子对闪锌矿的活化而降低了浮选选择性.相反地,传统铁质磨机磨矿则导致铅收率下降,而选择性提高.铁质磨机磨矿时铅收率降低可能是由铁氧化产物在矿物表面覆盖而造成的.粗粒更易受这种抑制的影响.

  8. Thickening and rheological properties of slurries as functions of the oxidized nickel ore composition

    Science.gov (United States)

    Serova, N. V.; Olyunina, T. V.; Lysykh, M. P.; Ermishkin, V. A.; Smirnova, V. B.

    2016-07-01

    The thickening and rheological properties of ore slurries and pulps after autoclave sulfuric acid leaching are analyzed as a function of the phase composition of oxidized nickel ore. Experiments have been carried out with samples of ferrous, silicate and combined ores. The initial concentration of the ore slurries is ˜28%. Higher values of thickening properties (thickening rate of 1.3 m/day, thickened layer concentration of 54%) are exhibited by the ferrous ore slurry and the pulp after its leaching (thickening rate of 0.9 m/day, thickened layer concentration of 42%). The thickening rate of silicate ore slurry is 0.15-0.2 m/day, the thickened layer concentration is 40-45%. The thickening properties of the pulp after autoclave sulfuric acid leaching of silicate ore strongly depend on the consumption of sulfuric acid. The thickening properties of combined ore and pulps after its leaching deteriorate with increase in the content of silicon dioxide in the ore. In terms of the rheological properties, all slurries are pseudoplastic systems. Poorly thickening slurries are characterized by a high dynamic yield stress (up to 7 Pa) and apparent plastic and effective viscosities. The effective viscosity at the equivalent shear rate corresponding to the mixer rotation rate in laboratory autoclave reaches 34 × 10-3 Pa s. Boundary values are determined in rheological constants with regard to the thickening properties. For instance, if the dynamic yield point is 1.0 Pa, the thickening rate decreases from 0.075 m/day to zero. The thickening and rheological properties are found to depend on the particle size of solid phase and its surface properties.

  9. The North American iron ore industry: a decade into the 21st century

    Science.gov (United States)

    Jorgenson, John D.; Perez, A. A

    2011-01-01

    During the 20th century, the iron ore mining industries of Canada and the United States passed through periods of transformation. The beginning of the 21st century has seen another period of transformation, with the failure of a number of steel companies and with consolidation of control within the North American iron ore industry. Canadian and United States iron ore production and the market control structure involved are changing rapidly. Consolidation of ownership, formation of foreign joint ventures, divestitures of upstream activities by steelmakers, and industry changes to ensure availability of feedstocks all played a role in recent developments in the North American iron ore industry. Canadian and U.S. iron ore operations and their strong linkage to downstream production, although isolated, must also be considered within the context of the changing global economy. Projects using new technology to produce direct reduced iron nuggets of 96-98% iron content and other projects designed to produce steel at minesites may once again change the face of the iron ore industry. Social and environmental issues related to sustainable development have had a significant effect on the North American iron ore industry.

  10. Microwave enhanced recovery of nickel-copper ore: communition and floatability aspects.

    Science.gov (United States)

    Henda, R; Hermas, A; Gedye, R; Islam, M R

    2005-01-01

    A study describing the effect of microwave radiation, at a frequency of 2450 MHz, on the processes of communication and flotation of a complex sulphide nickel-copper ore is presented. Ore communication has been investigated under standard radiation-free conditions and after ore treatment in a radiated environment as a function of ore size, exposure time to radiation, and microwave power. The findings show that communication is tremendously improved by microwave radiation with values of the relative work index as low as 23% at a microwave power of 1.406 kW and after 10 s of exposure time. Communication is affected by exposure time and microwave power in a nontrivial manner. In terms of ore floatability, the experimental tests have been carried out on a sample of 75 microm in size under different exposure times. The results show that both ore concentrate recoveries and grades of nickel and copper are significantly enhanced after microwave treatment of the ore with relative increases in recovered concentrate, grade of nickel, and grade of copper of 26 wt%, 15 wt%, and 27%, respectively, at a microwave power of 1330 kW and after 30 s of exposure time.

  11. Magnetic mineralogy of the Hongqiling Cu-Ni sulphide deposit:Implications for ore genesis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Pyrrhotite is one of the common ore minerals in Cu-Ni sulphide deposits, but only monoclinic pyrrhotite is ferromagnetic at room temperature. X-ray and EPA analyses reveal that most pyrrhotite forming sideronitic texture in the Hongqiling Cu-Ni sulphide deposit is monoclinic, but that in the massive ore is a mixture of monoclinic and hexagonal pyrrhotites. Differential thermal and magneticthermogravimetric analyses of massive ore indicate a magnetic transition and heat absorption at 323℃, suggesting that this temperature is the thermomagnetic and phase transition point of pyrrhotite. For massive pyrrhotite ores heated at 400℃ for 30 h and then quenched by cool water, the monoclinic pyrrhotite (mpo) transforms completely into the hexagonal pyrrhotite (hpo). However, all the pyrrhotites resulting from slow cooling of the sample in air are mpo. These results indicate that transformation between hpo and mpo depends upon the cooling rate. Therefore, massive ores in this deposit might have been formed via rapid cooling of ore melts. On the other hand, it is significant to study the effect of the ratio of the magnetite in total ores on the genesis of magmatic Cu-Ni suphide deposits.

  12. A novel stress distribution analytical model of O-ring seals under different properties of materials

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Di; Wang, Shao Ping; Wang, Xing Jian [School of Automation Science and Electrical Engineering, Beihang University, Beijing (China)

    2017-01-15

    The elastomeric O-ring seals have been widely used as sealing elements in hydraulic systems. The sealing performance of O-ring seals is related to stress distribution. The stresses distribution depends on the squeeze rate and internal pressure, and would vary with properties of O-ring seals materials. Thus, in order to study the sealing performance of O-ring seals, it is necessary to describe the analytic relationship between stress distribution and properties of O-ring seals materials. For this purpose, a novel Stress distribution analytical model (SDAM) is proposed in this paper. The analytical model utilizes two stress complex functions to describe the stress distribution of O-ring seals. The proposed SDAM can express not only the analytical relationship between stress distribution and Young’s modulus, but also the one between stress distribution and Poisson’s ratio. Finally, compared results between finite element analysis and the SDAM validate that the proposed model can effectively reveal the stress distribution under different properties for O-ring materials.

  13. Nitrile O-ring Cracking: A Case of Vacuum Flange O-ring Failures

    Energy Technology Data Exchange (ETDEWEB)

    Dees, Craig

    2016-07-01

    A review of recent nitrile O-ring failures in ISO-KF vacuum flange connections in glovebox applications is presented. An investigation of a single “isolated” o-ring failure leads to the discovery of cracked nitrile o-rings in a glovebox atmospheric control unit. The initial cause of the o-ring failure is attributed to ozone degradation. However, additional investigation reveals nitrile o-ring cracking on multiple gloveboxes and general purpose piping, roughly 85% of the nitrile o-rings removed for inspection show evidence of visible cracking after being in service for 18 months or less. The results of material testing and ambient air testing is presented, elevated ozone levels are not found. The contributing factors of o-ring failure, including nitrile air sensitivity, inadequate storage practices, and poor installation techniques, are discussed. A discussion of nitrile o-ring material properties, the benefits and limitations, and alternate materials are discussed. Considerations for o-ring material selection, purchasing, storage, and installation are presented in the context of lessons learned from the nitrile o-ring cracking investigation. This paper can be presented in 20 minutes and does not require special accommodations or special audio visual devices.

  14. Direct Biohydrometallurgical Extraction of Iron from Ore

    Energy Technology Data Exchange (ETDEWEB)

    T.C. Eisele

    2005-10-01

    A completely novel approach to iron extraction was investigated, based on reductive leaching of iron by anaerobic bacteria. Microorganisms were collected from an anaerobic bog where natural seepage of dissolved iron was observed. This mixed culture was used to reduce insoluble iron in a magnetite ore to the soluble ferrous (Fe{sup +2}) state. While dissolution rates were slow, concentrations of dissolved iron as high as 3487 mg/l could be reached if sufficient time was allowed. A factorial study of the effects of trace nutrients and different forms of organic matter indicated that the best dissolution rates and highest dissolved iron concentrations were achieved using soluble carbohydrate (sucrose) as the bacterial food source, and that nutrients other than nitrogen, phosphorus, potassium, sodium, and acetate were not necessary. A key factor in reaching high levels of dissolved iron was maintaining a high level of carbon dioxide in solution, since the solubility of iron carbonates increases markedly as the quantity of dissolved carbon dioxide increases. Once the iron is dissolved, it has been demonstrated that the ferrous iron can then be electroplated from solution, provided that the concentration of iron is sufficiently high and the hydrogen ion concentration is sufficiently low. However, if the leaching solution is electrolyzed directly, organic matter precipitates at the cathode along with the metallic iron. To prevent this problem, the ferrous iron should be separated from the bulk solution in a more concentrated, purified form. One route to accomplishing this is to take advantage of the change in solubility of ferrous iron as a function of carbon dioxide concentration. By cycling the concentration of carbon dioxide in solution, it is possible to produce an iron-rich concentrate that should be suitable for electrolysis. This represents the first viable hydrometallurgical method for leaching iron directly from ore and producing metallic iron.

  15. Oolitic ores in the Bakchar iron-ore cluster (Tomsk Oblast)

    Science.gov (United States)

    Rudmin, M. A.; Mazurov, A. K.

    2016-12-01

    Oolitic iron ores are typified, and their morphology and composition are studied. Special attention is focused on the character of distribution of valuable and harmful admixtures and determination of the principal minerals concentrating these elements. As a result of this study, three types of ores are identified, such as "loose" ores, cemented ores with glauconite-chlorite-clay cement, and well-cemented ores with siderite cement. The morphology and composition of the ore oolites are characterized. The forms of occurrence of calcium phosphates (anapaite) and phosphates of rare-earth elements (monazite, cularite) that are related to the harmful phosphorus admixture are described. According to the analysis of the elemental composition, the fractions of (-1…+0.2) and (-1…+0.1) mm in the western and eastern segments, respectively, may be promising for processing.

  16. Development of Technology for Enrichment of Silver Containing Ores

    Science.gov (United States)

    Shekiladze, Asmati; Kavtelashvili, Otari; Bagnashvili, Mamuka

    2016-10-01

    The progress of Georgian economics is substantially associated with a development of new deposits of mineral resources. Among them is the David-Gareji deposit where at present the intensive searching geological works are performed. The work goal involves the elaboration of the technology for processing of silver-containing quartz-barite ores. Without its development the mining of more valuable gold-polymetallic ores is impossible. Because of ore complexity silver and barite are considered in a common technological aspect. The investigations were carried out on the representative samples of quartz-barite ores containing 78-88 g/ton of silver and 27-29 % of silver is a nugget in the form of the simple sulphides and chlorides. The ore is characterized by fine coalescence of barite and ore-generating minerals. Non-ferrous metals haven't any industrial value because of their very low content. Therefore, for the processing of the ores under study the direct selective scheme of flotation enrichment was chosen and the formula of optimal reagent regime was elaborated. Potassium xanthogenate is used as a collector for flotation of silver minerals and pine oil- as a foaming agent. The effect of the pulp - pH and medium temperature on silver flotation was studied. It was established that the silver is actively floats in neutral medium. For barite flotation the various collectors were tested: sulfidezid cotton oil-soap stock, soaps of fatty acids and alkyl sulphates of C12 - C16 row, among the “Baritol” is the most efficient one. Depression of the barren rock was carried out by liquid glass in alkaline medium. The effect of pulp pH on barite flotation has been investigated. The best results were obtained at pH=8.5. The increase of the pulp alkalinity has no essential effect on the indexes of the barite enrichment. Conditional concentrate of the barite is obtained by two fold purification of the main flotation concentrate by the addition of the liquid glass to the re

  17. Endogenic Au-Ag polymetallic ore deposits and ore-bearing potentiality of strata

    Institute of Scientific and Technical Information of China (English)

    WANG Baode; NIU Shuyin; SUN Aiqun; XIE Yan; LUO Yi; LIU Hailong; WANG Yanhua

    2010-01-01

    The problem of ore-bearing potentiality of the strata involves metallogenic theory and ore-search orientation. Studies of the spatial distribution of endogenic Au-Ag polymetallic ore deposits in North Hebei indicated that the strata in which ore deposits occurred range in age from Paleozoic, Proterozoic to Mesozoic. In addition the ore deposits are characterized as being strata-bound in nature. The arise and establishment of "extracting" viewpoint may be attributed to the following three reasons: 1) influence by the idea of "ore-source bed"; 2) limitation of analytical techniques in the 1980s' (especially gold element); and 3) a small number of samples (sampling locations were mostly disturbed by mineralization). Studies have shown that ore-forming materials would most probably come from the deep interior of the Earth. Deep-seated ore-bearing materials including Au-Ag polymetals were brought to the shallow levels by way of mantle plume-mantle sub-plume-mantle branch structure multi-stage evolution, finally leading to the formation of ore deposits.

  18. Geological Characteristics of Epithermal Ore Concentrated Areas and Epithermal Ore Deposits in China

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The epithermal ore concentrated area is located in Southwestern China. We systematically study the regional geological characteristics such as the basement of Proterozoic, the capping bed, Moho, geothermal feature and tectonics, and discuss the relationship between distributed characteristics of the epithermal ore deposits and ore-control factors in this paper. It is concluded that the conditions, under which the epithermal ore deposits form, are huge thick basement of Proterozoic, long-time and wide-scope developed capping bed and weak magmatic activity. The basement of Proterozoic that enriches volcanic matters and carbon and the carbonaceous-bearing and paleo-pool-bearing capping bed provides main ore source. The large and deep faults and paleopool accordance with gravity anomaly gradient control the distribution of epithermal ore deposits. The lithologic assembles of microclastic rocks and carbonate rocks in the capping bed provide spaces of ore precipitation and create conditions of ore precipitation. The coincidence of many geological factors above forms the epithermal ore concentrated area.

  19. The sources of our iron ores. II

    Science.gov (United States)

    Burchard, E.F.

    1933-01-01

    In this instalment** the iron ore deposits of the Lake Superior States, which normally furnish about 80 per cent, of the annual output of the United States, are described together with historical notes on discovery and transportation of ore. Deposits in the Mississippi Valley and Western States are likewise outlined and the sources of imported ore are given. Reviewing the whole field, it is indicated that the great producing deposits of the Lake Superior and southern Appalachian regions are of hematite in basin areas of sedimentary rocks, that hydrated iron oxides and iron carbonates are generally found in undisturbed comparatively recent sediments, and that magnetite occurs in metamorphic and igneous rocks; also that numerical abundance of deposits is not a criterion as to their real importance as a source of supply. Statistics of production of iron ore and estimates of reserves of present grade conclude the paper.

  20. Understanding Lateritic Ore Agglomeration Behaviour as a ...

    African Journals Online (AJOL)

    user

    istics, low grade lateritic ores require more aggressive but costly chemical and hydrometallurgical techniques (e.g., leaching in ... Isothermal, batch agglomeration tests involving 30 and 44 % w/w sulphuric acid ... *Loss of ignition. Table 2: ...

  1. Research of Geochemical Associations of Nephelin Ores

    Science.gov (United States)

    Vulf, M.; Simonov, K.; Sazonov, A.

    The instant paper concerns research of distribution petrogenic chemical members in urtit ore body of Kia-Shaltyrsk deposit. Rocks of the deposit are ore for producing alum earth. Actuality of the subject based on outlooks of detection noble metal ore-bearing (Au, Pt, Pd, Rh, Ru) in alkaline rocks of Siberia, including rocks of Kia-Shaltyrsk deposit (Kuznetsk Alatau). The main purpose of analysis of distribution of members is directed to detection of a non-uniformity of distribution of substance and segments enriched with alum earth and noble members. The basic solved problems are following: o Creation regression models of ore body; o Definition of cumulative distribution functions of members in a contour of ore body; o The analysis of the obtained outcomes in geologic terms. For construction regression models the full-scale data was used, which was presented by the results of the spectral and silicate analyses of gold and petrogenic members containing 130 assays arranged in ore body. A non-linear multiparameter model of the ore body based on components of nephelin ore using neural net approach was constructed. For each member the corresponding distribution function is produced. The model is constructed on the following members: Au, Al2O3, SiO2, Fe2O3, CaO, MgO, SO3, R2O ((Na2O+K2O) -1) and losses of burning. The error of model forecasting membersS concentrations was from 0.02 up to 20%. Large errors basically connected with assays located near contact of ore body and ad- jacent strata or with very high concentrations of members; also they can be connected with different genesis of rocks or superposition of other processes. The analysis of concentrations of members and normalised absolute errors of the fore- cast has shown, that all members can be sectioned into two groups: first: Al2O3, SiO2, R2O, Fe2O3 and second: Au, losses of burning, CaO, MgO, SO3. The distribution of 1 gold is tightly connected with calcium and losses of burning and spatially linked with zones

  2. THE SOLUBILITY OF MILAS BAUXITE ORE IN SULPHURIC ACI

    Directory of Open Access Journals (Sweden)

    Mustafa GULFEN

    2001-06-01

    Full Text Available The effects of calcination conditions,sulphuric acid concentrations and dissolvingtemperature and period as parameters to thesolubility of the bauxite ore from Gobekdagı reservesin Mugla-Milas region were investigated. The bauxitesamples were calcined in different periods at differenttemperatures. Then the solubility of the calcinedbauxite samples in sulphuric acid solution wasexamined. Dissolving activation energy (Ea wascalculated using the optimum kinetics equation andthe results obtained from the solubility studiesexamined dissolving temperatures and periods

  3. Leaching of molybdenum and arsenic from uranium ore and mill tailings

    Science.gov (United States)

    Landa, E.R.

    1984-01-01

    A sequential, selective extraction procedure was used to assess the effects of sulfuric acid milling on the geochemical associations of molybdenum and arsenic in a uranium ore blend, and the tailings derived therefrom. The milling process removed about 21% of the molybdenum and 53% of the arsenic initially present in the ore. While about one-half of the molybdenum in the ore was water soluble, only about 14% existed in this form in the tailings. The major portion of the extractable molybdenum in the tailings appears to be associated with hydrous oxides of iron, and with alkaline earth sulfate precipitates. In contrast with the pattern seen for molybdenum, the partitioning of arsenic into the various extractable fractions differs little between the ore and the tailings. ?? 1984.

  4. Biomining: metal recovery from ores with microorganisms.

    Science.gov (United States)

    Schippers, Axel; Hedrich, Sabrina; Vasters, Jürgen; Drobe, Malte; Sand, Wolfgang; Willscher, Sabine

    2014-01-01

    Biomining is an increasingly applied biotechnological procedure for processing of ores in the mining industry (biohydrometallurgy). Nowadays the production of copper from low-grade ores is the most important industrial application and a significant part of world copper production already originates from heap or dump/stockpile bioleaching. Conceptual differences exist between the industrial processes of bioleaching and biooxidation. Bioleaching is a conversion of an insoluble valuable metal into a soluble form by means of microorganisms. In biooxidation, on the other hand, gold is predominantly unlocked from refractory ores in large-scale stirred-tank biooxidation arrangements for further processing steps. In addition to copper and gold production, biomining is also used to produce cobalt, nickel, zinc, and uranium. Up to now, biomining has merely been used as a procedure in the processing of sulfide ores and uranium ore, but laboratory and pilot procedures already exist for the processing of silicate and oxide ores (e.g., laterites), for leaching of processing residues or mine waste dumps (mine tailings), as well as for the extraction of metals from industrial residues and waste (recycling). This chapter estimates the world production of copper, gold, and other metals by means of biomining and chemical leaching (bio-/hydrometallurgy) compared with metal production by pyrometallurgical procedures, and describes new developments in biomining. In addition, an overview is given about metal sulfide oxidizing microorganisms, fundamentals of biomining including bioleaching mechanisms and interface processes, as well as anaerobic bioleaching and bioleaching with heterotrophic microorganisms.

  5. How Many Ore-Bearing Asteroids?

    CERN Document Server

    Elvis, Martin

    2013-01-01

    A simple formalism is presented to assess how many asteroids contain ore, i.e. commercially profitable material, and not merely a high concentration of a resource. I apply this formalism to two resource cases: platinum group metals (PGMs) and water. Assuming for now that only Ni-Fe asteroids are of interest for PGMs, then 1% of NEOs are rich in PGMs. The dearth of ultra-low delta-v (= US$1 B and the population of near-Earth objects (NEOs) larger than 100 m diameter is ~20,000 (Mainzer et al. 2011) the total population of PGM ore-bearing NEOs is roughly 10. I stress that this is a conservative and highly uncertain value. For example, an order of magnitude increase in PGM ore-bearing NEOs occurs if delta-v can as large as 5.7 km s-1. Water ore for utilization in space is likely to be found in ~1/1100 NEOs. NEOs as small as 18 m diameter can be water-ore-bodies because of the high richness of water (~20%) expected in ~25% of carbonaceous asteroids, bringing the number of water-ore-bearing NEOs to ~9000 out of th...

  6. Ores and Climate Change - Primary Shareholders

    Science.gov (United States)

    Stein, Holly J.; Hannah, Judith L.

    2015-04-01

    Many in the economic geology community concern themselves with details of ore formation at the deposit scale, whether tallying fluid inclusion data to get at changes in ore-forming fluids or defining structures that aid and abet mineralization. These compilations are generally aimed at interpretation of events at the site of ore formation, with the goal being assignment of the deposit to a sanctioned ore deposit model. While providing useful data, this approach is incomplete and does not, by itself, serve present-day requirements for true interdisciplinary science. The ore-forming environment is one of chaos and disequilibrium at nearly all scales (Stein, 2014). Chaos and complexity are documented by variably altered rocks, veins or disseminated mineralization with multi-generational fluid histories, erratic and unusual textures in host rocks, and the bitumen or other hydrocarbon products entwined within many ore deposits. This should give pause to our drive for more data as a means to find "the answer". The answer lies in the kind of data collected and more importantly, in the way we interpret those data. Rather than constructing an ever-increasing catalog of descriptive mutations on sanctioned ore deposit models (e.g., IOGC or Iron-Oxide Copper Gold deposits), the way forward is to link source and transport of metals, sulfur, and organic material with regional and ultimately whole Earth chemical evolution. Important experimental work provides chemical constraints in controlled and behaved environments. To these data, we add imagination and interpretation, always tying back to field observations. In this paper, several key points are made by way of ore deposit examples: (1) many IOCG deposits are outcomes of profound changes in the chemistry of the Earth's surface, in the interplay of the atmosphere, hydrosphere, biosphere, and lithosphere; (2) the redox history of Fe in deep earth may be ultimately expressed in the ore-forming sequence; and (3) the formation of

  7. PREDICTION OF LOCATION OF HIDDEN ORE DEPOSITS IN THE AGED ORE FIELDS:AN EXAMPLE FROM FENGHUANGSHAN ORE FIELD,TONGLING,CHINA

    Institute of Scientific and Technical Information of China (English)

    LIU; Liang-ming; PENG; Sheng-lin; YIANG; Qun-zhou; SHAO; Yong-jun; WANG; Zhi-qiang

    2001-01-01

    This paper discusses the strategy for successfully predicting the location of potential hidden ore bodies in aged ore field,and presents the result of location prediction of hidden ore bodies in Fenghuangshan ore field,Tongling.Innovative conceptual targeting procedures based on a genetic understanding of mineralization systems,carefully geological investigation and correct deduction,together with new geochemical and geophysical technology and integrating of comprehensive information are all very important for the successful prediction.In the aged Fenghuangshan ore field,through researching by application of the metallogenic theory of polygenetic compound ore deposits and triple-frequency induced polarization method and exploration tectono-geochemical method,we predicted location and quality of hidden ore bodies.According to the prediction,hidden high quality Cu-Au ore bodies of skarn type and porphyry type have been discovered.

  8. Dephosphorization of High-Phosphorus Iron Ore Using Different Sources of Aspergillus niger Strains.

    Science.gov (United States)

    Xiao, Chunqiao; Wu, Xiaoyan; Chi, Ruan

    2015-05-01

    High-phosphorus iron ore is traditionally dephosphorized by chemical process with inorganic acids. However, this process is not recommended nowadays because of its high cost and consequent environmental pollution. With the current tendency for development of a low-cost and eco-friendly process, dephosphorization of high-phosphorus iron ore through microbial process with three different sources of Aspergillus niger strains was studied in this study. Results show that the three strains of A. niger could grow well in the broth, and effectively remove phosphate from high-phosphorus iron ore during the experiments. Meanwhile, the total iron in the broth was also increased. Acidification of the broth seemed to be the major mechanism for the dephosphorization by these strains. High-pressure liquid chromatography analysis indicated that various organic acids were secreted in the broth, which caused a significant drop of the broth pH. Scanning electron microscopy of ore residues revealed that the high-phosphorus iron ore was obviously destroyed by the actions of these strains. Ore residues by energy-dispersive X-ray microanalysis and Fourier transform infrared spectroscopy indicated that the phosphate was obviously removed from the high-phosphorus iron ore. The optimization of the dephosphorization by these strains was also investigated, and the maximum percentages of phosphate removal were recorded at temperature 27-30 °C, initial pH 5.0-6.5, particle size 0.07-0.1 mm, and pulp density of 2-3% (w/v), respectively. The fungus A. niger was found to have good potential for the dephosphorization of high-phosphorus iron ore, and this microbial process seems to be economic and effective in the future industrial application.

  9. Flotation studies on low grade graphite ore from eastern India

    Institute of Scientific and Technical Information of China (English)

    Vasumathi N.; Vijaya Kumar T.V.; Ratchambigai S.; Subba Rao S.; Bhaskar Raju G

    2015-01-01

    A low grade graphite ore from eastern India was beneficiated by flotation to improve its quality. The ore was composed of 87.80%ash and 8.59%fixed carbon. Primary coarse wet grinding (d80:186 lm) followed by rougher flotation in Denver flotation cell using diesel as collector and pine oil as frother yielded a rougher concentrate. Regrinding (d80:144 lm) of this rougher concentrate was opted for further libera-tion of graphite. It was followed by cleaning in laboratory flotation column. This combined process of relatively coarse primary grinding followed by regrinding and cleaning in flotation column resulted in final concentrate of 7.44% yield with 89.65% fixed carbon and 6.00% ash. This approach of two-stage grinding to recover the flake graphite at the coarsest possible grind can help to minimize grinding energy costs. A conceptual flow sheet which is cost effective was developed based on this methodology.

  10. Nanocrystalline Iron-Ore-Based Catalysts for Fischer-Tropsch Synthesis.

    Science.gov (United States)

    Yong, Seok; Park, Ji Chan; Lee, Ho-Tae; Yang, Jung-Il; Hong, SungJun; Jung, Heon; Chun, Dong Hyun

    2016-02-01

    Nanocrystalline iron ore particles were fabricated by a wet-milling process using an Ultra Apex Mill, after which they were used as raw materials of iron-based catalysts for low-temperature Fischer-Tropsch synthesis (FTS) below 280 degrees C, which usually requires catalysts with a high surface area, a large pore volume, and a small crystallite size. The wet-milling process using the Ultra Apex Mill effectively destroyed the initial crystallite structure of the natural iron ores of several tens to hundreds of nanometers in size, resulting in the generation of nanocrystalline iron ore particles with a high surface area and a large pore volume. The iron-ore-based catalysts prepared from the nanocrystalline iron ore particles effectively catalyzed the low-temperature FTS, displaying a high CO conversion (about 90%) and good C5+ hydrocarbon productivity (about 0.22 g/g(cat)(-h)). This demonstrates the feasibility of using the iron-ore-based catalysts as inexpensive and disposable catalysts for the low-temperature FTS.

  11. Forecast of technological development in ore mining branches on basis of modernization of technique and technology of mining practice

    Directory of Open Access Journals (Sweden)

    Alexandr Ivanovich Tatarkin

    2012-12-01

    Full Text Available Pro forma data for exploration of mineral raw material base of some territories Ural regions are given. Perspective trajectories of development of mineral raw complex of federal subjects Russia’s are characterized. On this basis are highlighted groups of region — saving, reducing, raising the level of raw specialization or diversifying own economy. Peculiarities of forecasting technological development in ore mining branches in the period of planned economy of the USSR are illustrated. Indexes of successfully working iron-ore open casts are given. Theraise of internal Russian demand on raw is grounded, for which satisfaction are needed:corresponding tax policy for innovative production, corporate innovative policy, creating fund of supporting ore mining, commercialization of scientific products and working out rules in the sphere of scientific and technical progress. Peculiarities of technological development of ore mining branches of industry are emphasized: necessity of modernization of enterprises and exploration of deposits in regions with not enough developed infrastructure and opportunity of using new system approach by forecasting. Thestages ofeffectiveexploration of deposits and the parameters of developing ore mining enterprises arefound out. Components of forecast of technological development are analyzed. World tendencies of developing ore mining industry and basic directions of forecast of developing ore mining branches are given. New effective technologies being used in the ore mining are analyzed in detail.

  12. Contrasting REE Signatures on Manganese Ores of Iron Ore Group in North Orissa, India

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The distribution pattern of Rare Earth Elements (REE) in three categories of manganese ores viz.stratiform, stratabound-replacement, and detrital of Precambrian Iron Ore Group from north Orissa, India was reported.These categories of Mn-ore differed in their major and trace chemistry and exhibited contrasting REE signature.The stratiform ores were relatively enriched in REE content (697 μg·g-1) and their normalized pattern showed both positive Ce and Eu anomalies, whereas the stratabound-replacement types were comparatively depleted in REE content (211 μg·g-1) and showed negative Ce and flat Eu signatures.The detrital categories showed mixed REE pattern.The data plotted in different discrimination diagrams revealed a mixed volcaniclastic and chemogenic source of material for stratiform categories, and LREE (Light Rare Earth Elements) and HREE (Heavy Rare Earth Elements) are contributed by such sources, respectively.In contrast, the stratabound ore bodies were developed during the remobilization of stratiform ores, and associated Mn-containing rocks under supergene condition followed by the redeposition of circulating mineralized colloidal solutions in structurally favorable zones.During this process, some of the constituents were found only in very low concentration within stratabound ores, and this is attributed to their poor leachability/mobility.The detrital ores did not exhibit any significant characteristic in respect of REE as their development was via a complex combination of processes involving weathering, fragmentation, recementation, and burial under soil cover.

  13. Analysis of Mineralization System and Prediction of New-Type Ore Deposits

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The discovery of new-type ore deposits, an important approach to guarantee the mineral resources supply in the 21st century, often brings about a gigantic increase in the mineral resources reserves. The analysis of mineralization system is of great importance to the discovery of new-type ore deposits. ① The understanding of the relationship among various ore deposit types within a mineralization system in a region can help us to locate the unknown ore deposit types from the known ore deposit types, evidence that has been proved in the mineral prospecting history of ore belts in the middle and lower reaches of the Yangtze River, China. ② The understanding of the spatial structure of a mineralization system, especially of the vertical zonation, is helpful for the discovery of the concealed ore deposit types. ③ Clarifying the temporal structure of a mineralization system, including the iteration relationship between the mineral deposit types in the mineralization, leads to the location of the missing mineralization chains from the known mineralization chains (mineral deposit type), a method often proved to be effective in the magmatic-hydrothermal mineralization system. ④ Clarifying the factors restraining the diversity of mineral deposit types in mineralization system leads to the discovery of the potential of new-type mineral deposits in relevant region. ⑤ Studying new mineralization setting and new ore-forming processes leads to discovery of new-type mineral deposit. More probabilities of discovery of new-type mineral deposits are present in biogenic mineralization system, deep-sea mineralization system, low-temperature mineralization system, tectonic mineralization system and superimposed mineralization system.

  14. A New Direction for Biomining: Extraction of Metals by Reductive Dissolution of Oxidized Ores

    Directory of Open Access Journals (Sweden)

    Kevin B. Hallberg

    2013-01-01

    Full Text Available Biomining, the biotechnology that uses microorganisms to extract metals from ores and concentrates, is currently used exclusively for processing reduced ores and mine wastes. Metals of economic value also occur extensively in oxidized ores, such as nickel laterites. While these are not amenable to oxidative dissolution, the ferric iron minerals they contain can, in theory, be disrupted by iron reduction, causing associated metals to be released. We have harnessed the ability of the facultatively anaerobic, acidophilic bacterium Acidithiobacillus ferroooxidans to couple the oxidation of elemental sulphur to the reduction of ferric iron in the goethite fraction of a limonitic nickel ore at 30 °C. Nickel and other metals (Co, Cr and Mn were effectively solubilised and maintained in solution due to the low pH (1.8 of the leach liquor. The results highlight the potential for the bioprocessing of oxidized, iron-rich ores using an approach that is energy-saving and environmentally-benign compared with metallurgical processes currently applied to the extraction of Ni from lateritic ores.

  15. A Study on the Geological—Geochemical Dynamics of Hydrothermal Ore Deposition as Exemplified by the Muping—Rushan Gold Deposit Belt,Eastern Shandong,China

    Institute of Scientific and Technical Information of China (English)

    赵伦山; 高太忠; 等

    1996-01-01

    This paper presents a method of establishing a hydrothermal ore-forming reaction system.On the basis of the study of four typical hydrothermal deposits,the following conclusions concerning geochemical dynamic controlling during hydrothermal mineralization have been sions concerning geochemical dynaamic controlling during hydrothermal mineralization have been drawn:(1)The regional tectonic activities control the concentration and dispersion of elements in the ore-forming process in terms of their effects on the thermodynamic nature and conditions of the ore-forming reaction system.(2)During hydrothermal mineralization the activites of ore-bearing faults can be divideb into two stages:the brittle splitting stage and the brittle-tough tensing stage,which would create characteristically different geodynamic conditions for the geochemical thermodynamic ore-forming system.(3)The hydrothermal ore-forming reaaction system is an open dynamic system.At the brittle splitting stage the system was so strongly supersaturated and unequilibrated as to speed up and enhance the crystallization and differentiation of ore-forming fluids.And at the brittle-tough tensing stage,the ore-forming system was in a weak supersaturated state;with decreasing temperature and pressure the crystallization of oreforming material would show down,and it can be regarded as an equilibrated state.(4)In the lates stages of hydrothermal evolution,gold would be concentrated in the residual ore-forming solution.The pulsating fracture activite in this stage led to the crush of pyrite ore and it was then filled with gold-enriched solution,forming high-grage“fissure”gold ore.This ore-forming process could be called the coupling mechanism of ore formation.

  16. Extracting phosphoric iron under laboratorial conditions smelting bog iron ores

    Science.gov (United States)

    Török, B.; Thiele, A.

    2013-12-01

    In recent years it has been indicated by archaeometric investigations that phosphoric-iron (P-iron, low carbon steel with 0,5-1,5wt% P), which is an unknown and unused kind of steel in the modern industry, was widely used in different parts of the world in medieval times. In this study we try to explore the role of phosphorus in the arhaeometallurgy of iron and answer some questions regarding the smelting bog iron ores with high P-content. XRF analyses were performed on bog iron ores collected in Somogy county. Smelting experiments were carried out on bog iron ores using a laboratory model built on the basis of previously conducted reconstructed smelting experiments in copies of excavated furnaces. The effect of technological parameters on P-content of the resulted iron bloom was studied. OM and SEM-EDS analyses were carried out on the extracted iron and slag samples. On the basis of the material analyses it can be stated that P-iron is usually extracted but the P-content is highly affected by technological parameters. Typical microstructures of P-iron and of slag could also be identified. It could also be established that arsenic usually solved in high content in iron as well.

  17. Up-gradation of MoO{sub 3} and separation of copper, iron, zinc from roasted molybdenum ore by a leaching process

    Energy Technology Data Exchange (ETDEWEB)

    Jin-Young, Lee; Jyothi Rajesh, Kumar; Ho-Seok, Jeon; Joon-Soo, Kim, E-mail: rajeshkumarphd@rediffmail.com, E-mail: rkumarphd@kigam.re.kr [Extractive Metallurgy Department, Mineral Resources Research Division, Korea Institute of Geoscience and Mineral Resources (KIGAM) (Korea, Republic of)

    2013-04-15

    The present research paper deals with the oxidation process of molybdenum ore. The main target of the present study is the up-gradation of MoO{sub 3} from roasted molybdenum ore by a leaching process without waste generation. The most important application of hydrometallurgical processing is the leaching process of the ore and it is the primary process to make pure metal from ore. The present investigations optimize the following experimental parameters to improve the concentration of MoO{sub 3} as well as the separation of copper, iron and zinc in roasted molybdenum ore: effect of acid concentration, temperature, pulp density and leaching time were studied systematically. The temperature study was carried out at 550-595 Degree-Sign C for the oxidation process. The XRD result shows that oxidation process of molybdenum ore and SEM pictures were taken for particles before and after the oxidation process at 585 Degree-Sign C for 360 min. (author)

  18. Effects of Sintering Temperature on the Physical Properties of Porosity Ceramics Based on Copper Ore Tailings%烧结温度对铜尾矿多孔陶瓷物理性能的影响研究∗

    Institute of Scientific and Technical Information of China (English)

    官钰洁

    2016-01-01

    In this article,a kind of porosity ceramics was prepared using copper ore tailings and potassium feldspar with adding CaCO3 as the pore-forming materials.The effects of sintering temperature on the crystallization phase,shore hard-ness,density,water absorption of the porosity ceramics were investigated systematically.The results indicate that the main crystalline phases of the porosity ceramics are leucite,wollastonite and akermanite.The increasing temperature favors the formation of leucite.The hardness of the porosity ceramics drops with the rise of temperature when the temperature above 1 160 ℃.The density of the porosity ceramics exhibits rather temperature independent behaviors in the range of 1 150 ℃ to 1 180 ℃.However,it changes obviously when further raising the temperature.For the porous ceramics with different con-tent of copper ore tailings,the water absorption reaches maximum at 1 180 ℃.%以铜尾矿和钾长石为主要原料,添加CaCO3为发泡剂,制备多孔陶瓷。研究了烧结温度对尾矿多孔陶瓷晶相、硬度、密度和吸水率的影响。结果表明:尾矿多孔陶瓷的主晶相为白榴子石,硅灰石和镁黄长石。烧结温度升高有利于白榴子石相的形成,当烧结温度>1160℃后,多孔陶瓷的硬度总体上随着烧结温度的升高而降低。尾矿多孔陶瓷的密度在1150~1180℃,随着烧结温度的变化不大。进一步提高烧结温度,但密度变化则非常明显。对于不同尾矿含量的多孔陶瓷,其吸水率都在1180℃烧结温度时达到最大。

  19. Aluminum substitution in goethite in lake ore

    Directory of Open Access Journals (Sweden)

    Carlson, L.

    1995-06-01

    Full Text Available The extent of substitution of Fe by Al in goethite in 32 lake ore samples collected from 11 lakes in Finland varied between 0 and 23 mol-%. The data indicated a negative relationship between Al-substitution and the particle size of lake ore. Differences in the Al-substitution were apparent between sampling sites, suggesting that kinetic and environmental variation in lake ore formation influences the substitution. Non-substituted goethite is formed in coarse-grained sediments with locally high concentrations of Fe due to iron-rich springs. Unit cell edge lengths and volumes of goethite varied as function of Al-subsitution but deviated from the Vegard relationship towards higher values.

  20. The physical hydrogeology of ore deposits

    Science.gov (United States)

    Ingebritsen, Steven E.; Appold, M.S.

    2012-01-01

    Hydrothermal ore deposits represent a convergence of fluid flow, thermal energy, and solute flux that is hydrogeologically unusual. From the hydrogeologic perspective, hydrothermal ore deposition represents a complex coupled-flow problem—sufficiently complex that physically rigorous description of the coupled thermal (T), hydraulic (H), mechanical (M), and chemical (C) processes (THMC modeling) continues to challenge our computational ability. Though research into these coupled behaviors has found only a limited subset to be quantitatively tractable, it has yielded valuable insights into the workings of hydrothermal systems in a wide range of geologic environments including sedimentary, metamorphic, and magmatic. Examples of these insights include the quantification of likely driving mechanisms, rates and paths of fluid flow, ore-mineral precipitation mechanisms, longevity of hydrothermal systems, mechanisms by which hydrothermal fluids acquire their temperature and composition, and the controlling influence of permeability and other rock properties on hydrothermal fluid behavior. In this communication we review some of the fundamental theory needed to characterize the physical hydrogeology of hydrothermal systems and discuss how this theory has been applied in studies of Mississippi Valley-type, tabular uranium, porphyry, epithermal, and mid-ocean ridge ore-forming systems. A key limitation in the computational state-of-the-art is the inability to describe fluid flow and transport fully in the many ore systems that show evidence of repeated shear or tensional failure with associated dynamic variations in permeability. However, we discuss global-scale compilations that suggest some numerical constraints on both mean and dynamically enhanced crustal permeability. Principles of physical hydrogeology can be powerful tools for investigating hydrothermal ore formation and are becoming increasingly accessible with ongoing advances in modeling software.

  1. A new radiation shielding material: Amethyst ore

    Energy Technology Data Exchange (ETDEWEB)

    Korkut, Turgay, E-mail: turgaykorkut@hotmail.co [Faculty of Science and Art, Department of Physics, Ibrahim Cecen University, Agri (Turkey); Korkut, Hatun [Faculty of Science and Art, Department of Physics, Ibrahim Cecen University, Agri (Turkey); Karabulut, Abdulhalik; Budak, Goekhan [Faculty of Science, Department of Physics, Atatuerk University, Erzurum (Turkey)

    2011-01-15

    This paper describes a new radiation shielding material, amethyst ore. We have determined the elemental composition of amethyst using WDXRF spectroscopy technique. To see the shielding capability of amethyst for several photon energies, these results have been used in simulation process by FLUKA Monte Carlo radiation transport code. Linear attenuation coefficients have been calculated according to the simulation results. Then, these values have been compared to a fine shielding concrete material. The results show that amethyst shields more gamma beams than concrete. This investigation is the first study about the radiation shielding properties of amethyst ore.

  2. METALLOGENIC SYSTEM OF DACHANG TINPOLYMETALLIC ORE FIELD

    Institute of Scientific and Technical Information of China (English)

    WU Xiang-bin; DAI Ta-gen; WANG Zhi-bin; FANG Sheng-kui

    2001-01-01

    The Dachang tin-polymetallic ore field in northern Guangxi,China,lies in a mid-late Paleozoic rift that borders up the southern boundary of the Jiangnan-Xuefeng Massif.As a giant ore deposit,it deposited in middle of the Nandang-Hechi metallogenic zone.The orehosting strata are of the Devonion,which shows the evident characteristics of polymetallic elements,i.e: ,Sn,Zn,Pb,Sb,As,Cu,Ag,In,Ge,Cd,et al.,and over 1 000 000 t tin reserves.

  3. Partitioning properties of rare earth ores in China

    Institute of Scientific and Technical Information of China (English)

    CHI Ru'an; LI Zhongjun; PENG Cui; ZHU Guocai; XU Shengming

    2005-01-01

    The properties of rare earth partitioning in Chinese industrial rare earth ores were analyzed. Rare earth ores can be divided into the single-mineral type ore with bastnaesite, the multi-mineral type ore with bastnaesite and monazite, and the weathering crust type. Both the Bayan Obo rare earth ore and the Zhushan rare earth ore are a kind of mixed ore, consisting of bastnaesite and monazite. Their rare earth partitionings are strongly enriched in light rare earths, where CeO2 is 50% and the light rare earth partitioning is totally over 95%. The Mianning rare earth ore as well as the Weishan rare earth is a kind of rare earth ore only having bastnaesite. Their rare earth partitionings are also strongly enriched in light rare earths,in which CeO2 is 47% and the light rare earth partitioning is totally over 94%. For the weathering crust type rare earth ore,there are the Longnan rare earth ore, the Xunwu rare earth ore, and the middle yttrium and rich europium ore. In the Longnan rare earth ore, which is strongly enriched in heavy rare earths, Y2O3 is 64.83%, and the heavy and light rare earth partitionings are 89.40% and 10.53%, respectively. In the Xunwu rare earth ore, which is strongly enriched in light rare earths, CeO2 is 47.16%, and the light rare earth partitioning is totally 93.25%. Y and Eu are enriched in the middle yttrium and rich europium ore. Its middle rare earth partitioning is totally over 10%, and Eu2O3 and Y2O3 are over 0.5% and 20%,respectively, which are mainly industrial resources of the middle and the heavy rare earths.

  4. Sintering Properties and Optimal Blending Schemes of Iron Ores

    Institute of Scientific and Technical Information of China (English)

    Dauter0liveira; WUSheng—li; DAIYu—ming; XUJian; CHEN Hong

    2012-01-01

    In order to obtain good sintering performance, it is important to understand sintering properties of iron ores. Sintering properties including chemical composition, granulation and high-temperature behaviors of ores from China, Brazil and Australia. Furthermore, several indices were defined to evaluate sintering properties of iron ores. The results show that: for chemical composition, Brazilian ores present high TFe, low SiOz, and low Alz03 con- tent. For granulation, particle diameter ratio of Brazilian ores are high; particle intermediate fraction of Chinese con- centrates are low; and average particle size and clay type index of Australian ores are high. For high-temperature properties, ores from China, Brazil and Australia present different characteristics. Ores from different origins should be mixed together to obtain good high-temperature properties. According to the analysis of each ore's sintering prop- erties, an ore blending scheme (Chinese concentrates 20 ~-1- Brazilian ores 400//oo -k Australian ores 40 ~) was sugges- ted. Moreover, sinter pot test using blending mix was performed, and the results indicated that the ore blending scheme led to good sintering performance and sinter quality.

  5. Numerical simulation of high voltage electric pulse comminution of phosphate ore

    Institute of Scientific and Technical Information of China (English)

    Razavian Seyed Mohammad; Rezai Bahram; Irannajad Mehdi; Ravanji Mohammad Hasan

    2015-01-01

    Numerical simulation of the electrical field distribution helps in-depth understanding of the mechanisms behind the responses and the benefits of the high voltage pulse comminution. The COMSOL Multiphysics package was used to numerically simulate the effect of ore compositions in this study. Regarding phos-phate ore particles shape and composition, the effects of mineral composition, particle size, particle shape and electrodes distance were investigated on the electrical field intensity and distribution. The results show that the induced electrical field is significantly dependent on the electrical properties of minerals, the feed particle size and the location of conductive minerals in ores. The angle of material contact sur-face with the discharge electrode is also an important factor in the intensity of electrical field. Moreover, it is found that the specific liberation effect at the disintegration of phosphate ore by electrical pulses is due to the locality of the electrical field at the interface of mineral components of the phosphate ore aggregates with different permittivities. However, the intensity of the electrical field increases with shar-pening the contact angle. Besides, the electrical discharge in the samples is converted to the elec-trohydraulic discharge across the surrounding water by changing the distance between the discharge electrode and sample surface.

  6. HANDLING, STORAGE AND IRON ORE QUALITY

    Directory of Open Access Journals (Sweden)

    Fabiana Fonseca Fortes

    2012-06-01

    Full Text Available This paper aims to identify handling and storage impact in iron ore quality, in their physical and chemical characteristics most important for a mining. It is tried to show the interferences in iron ore quality caused by the handling equipment and stockpiling. The research is restricted to Complexo Vargem Grande (Vale. The timeline was demarcated based on the formation of stockpiling. The fieldwork enables data collection and distinction of the routine procedures of casual operations handling. The quantitative analysis is conducted by the statistical method. As a conclusion, handling and storage identified are able to insert changes in physical and chemical characteristics of iron ore. Storage contributes to reduce variability of silica and alumina concentrations, but contributes too particle size deterioration. The handling induces degradation and segregation. However, there is the possibility to decrease handling of the ore and to establish the ideal size of stocks on the system in study, improving the efficiency of the system and consequent in global costs.

  7. Sources of ores of the ferroalloy metals

    Science.gov (United States)

    Burchard, E.F.

    1933-01-01

    Since all steel is made with the addition of alloying elements, the record of the metallic raw materials contributory to the steel industry would be far from complete without reference to the ferroalloy metals. This paper, therefore, supplements two preceding arvicles on the sources of our iron ores. The photographs, with the exception of those relating to molybdenum and vanadium, are by the author.

  8. Catalytic decomposition of tar derived from wood waste pyrolysis using Indonesian low grade iron ore as catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Wicakso, Doni Rahmat [Chemical Engineering Department, Faculty of Engineering, Lambung Mangkurat University, Jalan A. Yani KM. 36 Banjarbaru, 70714, South Kalimantan (Indonesia); Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Sutijan; Rochmadi [Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Budiman, Arief, E-mail: abudiman@ugm.ac.id [Chemical Engineering Department, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No. 2 Bulaksumur, Yogyakarta, 55281 (Indonesia); Center for Energy Studies, Gadjah Mada University, Sekip K1A, Yogyakarta, 55281 (Indonesia)

    2016-06-03

    Low grade iron ore can be used as an alternative catalyst for bio-tar decomposition. Compared to other catalysts, such as Ni, Rd, Ru, Pd and Pt, iron ore is cheaper. The objective of this research was to investigate the effect of using low grade iron ore as catalyst for tar catalytic decomposition in fixed bed reactor. Tar used in this experiment was pyrolysis product of wood waste while the catalyst was Indonesian low grade iron ore. The variables studied were temperatures between 500 – 600 °C and catalyst weight between 0 – 40 gram. The first step, tar was evaporated at 450 °C to produce tar vapor. Then, tar vapor was flowed to fixed bed reactor filled low grade iron ore. Gas and tar vapor from reactor was cooled, then the liquid and uncondensable gas were analyzed by GC/MS. The catalyst, after experiment, was weighed to calculate total carbon deposited into catalyst pores. The results showed that the tar components that were heavy and light hydrocarbon were decomposed and cracked within the iron ore pores to from gases, light hydrocarbon (bio-oil) and carbon, thus decreasing content tar in bio-oil and increasing the total gas product. In conclusion, the more low grade iron ore used as catalyst, the tar content in the liquid decrease, the H{sup 2} productivity increased and calorimetric value of bio-oil increased.

  9. Catalytic decomposition of tar derived from wood waste pyrolysis using Indonesian low grade iron ore as catalyst

    Science.gov (United States)

    Wicakso, Doni Rahmat; Sutijan, Rochmadi, Budiman, Arief

    2016-06-01

    Low grade iron ore can be used as an alternative catalyst for bio-tar decomposition. Compared to other catalysts, such as Ni, Rd, Ru, Pd and Pt, iron ore is cheaper. The objective of this research was to investigate the effect of using low grade iron ore as catalyst for tar catalytic decomposition in fixed bed reactor. Tar used in this experiment was pyrolysis product of wood waste while the catalyst was Indonesian low grade iron ore. The variables studied were temperatures between 500 - 600 °C and catalyst weight between 0 - 40 gram. The first step, tar was evaporated at 450 °C to produce tar vapor. Then, tar vapor was flowed to fixed bed reactor filled low grade iron ore. Gas and tar vapor from reactor was cooled, then the liquid and uncondensable gas were analyzed by GC/MS. The catalyst, after experiment, was weighed to calculate total carbon deposited into catalyst pores. The results showed that the tar components that were heavy and light hydrocarbon were decomposed and cracked within the iron ore pores to from gases, light hydrocarbon (bio-oil) and carbon, thus decreasing content tar in bio-oil and increasing the total gas product. In conclusion, the more low grade iron ore used as catalyst, the tar content in the liquid decrease, the H2 productivity increased and calorimetric value of bio-oil increased.

  10. Natural radioactivities in iron and nickel ores imported into Japan and the dose assessment for workers handling them.

    Science.gov (United States)

    Iwaoka, Kazuki; Tagami, Keiko; Yonehara, Hidenori

    2010-09-01

    Japan imports Fe and Ni ores from abroad for use as industrial raw materials in the manufacture of industrial products like stainless steel. Some of these ores might contain high levels of radioactivity, and then workers handling them would be exposed to radiation without being aware of it. Activity concentrations in these ores should be measured to evaluate the radiation exposure of workers. In this study, Fe and Ni ores used as industrial raw materials were collected from iron and steel companies, and the activity concentrations of the (238)U series, the (232)Th series and (40)K in these ores were determined using inductively coupled plasma mass spectrometry (ICP-MS) and gamma ray spectrometry. The activity concentrations of the (238)U series, the (232)Th series and (40)K in these ores samples were lower than the International Atomic Energy Agency (IAEA) values. The doses to workers handling these ores were estimated using methods for dose assessment given in a report by the European Commission. In each scenario, a maximum value of the annual effective dose to workers was estimated to be about 6.8 × 10(-6) Sv, which was lower than intervention exemption levels (annual dose 1.0 × 10(-3) Sv) given in International Commission on Radiological Protection (ICRP) Publication 82.

  11. Natural radioactivities in iron and nickel ores imported into Japan and the dose assessment for workers handling them

    Energy Technology Data Exchange (ETDEWEB)

    Iwaoka, Kazuki; Tagami, Keiko; Yonehara, Hidenori, E-mail: iwaoka@nirs.go.j [Research Center for Radiation Protection, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage, Chiba 263-8555 (Japan)

    2010-09-15

    Japan imports Fe and Ni ores from abroad for use as industrial raw materials in the manufacture of industrial products like stainless steel. Some of these ores might contain high levels of radioactivity, and then workers handling them would be exposed to radiation without being aware of it. Activity concentrations in these ores should be measured to evaluate the radiation exposure of workers. In this study, Fe and Ni ores used as industrial raw materials were collected from iron and steel companies, and the activity concentrations of the {sup 238}U series, the {sup 232}Th series and {sup 40}K in these ores were determined using inductively coupled plasma mass spectrometry (ICP-MS) and gamma ray spectrometry. The activity concentrations of the {sup 238}U series, the {sup 232}Th series and {sup 40}K in these ores samples were lower than the International Atomic Energy Agency (IAEA) values. The doses to workers handling these ores were estimated using methods for dose assessment given in a report by the European Commission. In each scenario, a maximum value of the annual effective dose to workers was estimated to be about 6.8 x 10{sup -6} Sv, which was lower than intervention exemption levels (annual dose 1.0 x 10{sup -3} Sv) given in International Commission on Radiological Protection (ICRP) Publication 82. (note)

  12. Mining and processing of uranium ores at the Streltsovsky ore field

    Energy Technology Data Exchange (ETDEWEB)

    Ovseytchuk, V.A.; Litvinenko, V.G.; Kultishev, V.I. [Joint Stock Company, Priargunsky Industrial Mining and Chemical Union, Krasnokamensk, Chita Region (Russian Federation)

    2000-07-01

    The uranium deposits of Streltsovsky ore fields provide raw materials for Russian nuclear industry. For this region, it is important to achieve continued and increased activities in the recovery of mineral resources of uranium. Similarly, maintaining the mining and processing of uranium ores ensures the supply of raw materials for the nuclear industry. With the current operations, increasing the mining and processing activities would increase the cost of production of uranium oxides due to decreasing grades of ore body. After a review of the existing economic, technological and natural factors, a solution was proposed based on the joint application of underground mining and ore enrichment and processing with the help of hydrometallurgical process, in-situ leaching. Reduction of operation coasts and creation of radiation-safe working conditions could be achieved with the application of these systems involving concrete hardening in the mines and in-situ leaching of ore. With the help of economic-mathematical modeling, methods for rational application of various technologies could be determined and their processing parameters were specified. A reduction of coasts could be obtained and favorable conditions could be established for improvement in the treatment of lower grade ores by heap leaching. Application of purification of mine waters and tailing pond reduces the influence of the radiation and the impact on the natural environment. (author)

  13. Hydrogen Reduction of Hematite Ore Fines to Magnetite Ore Fines at Low Temperatures

    Directory of Open Access Journals (Sweden)

    Wenguang Du

    2017-01-01

    Full Text Available Surplus coke oven gases (COGs and low grade hematite ores are abundant in Shanxi, China. Our group proposes a new process that could simultaneously enrich CH4 from COG and produce separated magnetite from low grade hematite. In this work, low-temperature hydrogen reduction of hematite ore fines was performed in a fixed-bed reactor with a stirring apparatus, and a laboratory Davis magnetic tube was used for the magnetic separation of the resulting magnetite ore fines. The properties of the raw hematite ore, reduced products, and magnetic concentrate were analyzed and characterized by a chemical analysis method, X-ray diffraction, optical microscopy, and scanning electron microscopy. The experimental results indicated that, at temperatures lower than 400°C, the rate of reduction of the hematite ore fines was controlled by the interfacial reaction on the core surface. However, at temperatures higher than 450°C, the reaction was controlled by product layer diffusion. With increasing reduction temperature, the average utilization of hydrogen initially increased and tended to a constant value thereafter. The conversion of Fe2O3 in the hematite ore played an important role in the total iron recovery and grade of the concentrate. The grade of the concentrate decreased, whereas the total iron recovery increased with the increasing Fe2O3 conversion.

  14. Direct Reduction of High-phosphorus Oolitic Hematite Ore Based on Biomass Pyrolysis

    Institute of Scientific and Technical Information of China (English)

    Dong-bo HUANG; Yan-bing ZONG; Ru-fei WEI; Wei GAO; Xiao-ming LIU

    2016-01-01

    Direct reduction of high-phosphorus oolitic hematite ore based on biomass pyrolysis gases (CO,H2 ,and CH4 ),tar,and char was conducted to investigate the effects of reduction temperature,iron ore-biomass mass ratio, and reduction time on the metallization rate.In addition,the effect of particle size on the dephosphorization and iron recovery rate was studied by magnetic separation.It was determined that the metallization rate of the hematite ore could reach 99.35% at iron ore-biomass mass ratio of 1∶0.6,reduction temperature of 1 100 ℃,and reduction time of 5 5 min.The metallization rate and the aggregation degree of iron particles increase with the increase of reduction temperature.The particle size of direct reduced iron (DRI)has a great influence on the quality of the iron concentrate during magnetic separation.The separation degree of slag and iron was improved by the addition of 1 5 mass% sodi-um carbonate.DRI with iron grade of 89.11%,iron recovery rate of 83.47%,and phosphorus content of 0.28% can be obtained when ore fines with particle size of -10μm account for 78.15%.

  15. Hydrogen Plasma Processing of Iron Ore

    Science.gov (United States)

    Sabat, Kali Charan; Murphy, Anthony B.

    2017-06-01

    Iron is currently produced by carbothermic reduction of oxide ores. This is a multiple-stage process that requires large-scale equipment and high capital investment, and produces large amounts of CO2. An alternative to carbothermic reduction is reduction using a hydrogen plasma, which comprises vibrationally excited molecular, atomic, and ionic states of hydrogen, all of which can reduce iron oxides, even at low temperatures. Besides the thermodynamic and kinetic advantages of a hydrogen plasma, the byproduct of the reaction is water, which does not pose any environmental problems. A review of the theory and practice of iron ore reduction using a hydrogen plasma is presented. The thermodynamic and kinetic aspects are considered, with molecular, atomic and ionic hydrogen considered separately. The importance of vibrationally excited hydrogen molecules in overcoming the activation energy barriers, and in transferring energy to the iron oxide, is emphasized. Both thermal and nonthermal plasmas are considered. The thermophysical properties of hydrogen and argon-hydrogen plasmas are discussed, and their influence on the constriction and flow in the of arc plasmas is considered. The published R&D on hydrogen plasma reduction of iron oxide is reviewed, with both the reduction of molten iron ore and in-flight reduction of iron ore particles being considered. Finally, the technical and economic feasibility of the process are discussed. It is shown that hydrogen plasma processing requires less energy than carbothermic reduction, mainly because pelletization, sintering, and cokemaking are not required. Moreover, the formation of the greenhouse gas CO2 as a byproduct is avoided. In-flight reduction has the potential for a throughput at least equivalent to the blast furnace process. It is concluded that hydrogen plasma reduction of iron ore is a potentially attractive alternative to standard methods.

  16. Hydrogen Plasma Processing of Iron Ore

    Science.gov (United States)

    Sabat, Kali Charan; Murphy, Anthony B.

    2017-03-01

    Iron is currently produced by carbothermic reduction of oxide ores. This is a multiple-stage process that requires large-scale equipment and high capital investment, and produces large amounts of CO2. An alternative to carbothermic reduction is reduction using a hydrogen plasma, which comprises vibrationally excited molecular, atomic, and ionic states of hydrogen, all of which can reduce iron oxides, even at low temperatures. Besides the thermodynamic and kinetic advantages of a hydrogen plasma, the byproduct of the reaction is water, which does not pose any environmental problems. A review of the theory and practice of iron ore reduction using a hydrogen plasma is presented. The thermodynamic and kinetic aspects are considered, with molecular, atomic and ionic hydrogen considered separately. The importance of vibrationally excited hydrogen molecules in overcoming the activation energy barriers, and in transferring energy to the iron oxide, is emphasized. Both thermal and nonthermal plasmas are considered. The thermophysical properties of hydrogen and argon-hydrogen plasmas are discussed, and their influence on the constriction and flow in the of arc plasmas is considered. The published R&D on hydrogen plasma reduction of iron oxide is reviewed, with both the reduction of molten iron ore and in-flight reduction of iron ore particles being considered. Finally, the technical and economic feasibility of the process are discussed. It is shown that hydrogen plasma processing requires less energy than carbothermic reduction, mainly because pelletization, sintering, and cokemaking are not required. Moreover, the formation of the greenhouse gas CO2 as a byproduct is avoided. In-flight reduction has the potential for a throughput at least equivalent to the blast furnace process. It is concluded that hydrogen plasma reduction of iron ore is a potentially attractive alternative to standard methods.

  17. Bacterial bioleaching of low grade nickel limonite and saprolite ores by mixotrophic bacteria

    Directory of Open Access Journals (Sweden)

    Chaerun Siti Khodijah

    2016-01-01

    Full Text Available Utilization of indigenous bacteria should be considered to establish a successful biohydrometallurgical process. In this study, mixrotrophic iron-oxidizing bacterial consortia consisting of Comamonas testosteroni, Alicyclobacillus ferrooxydans and Pantoea septic which were isolated from Indonesian mineral ores were examined to determine their abilities to recover nickel from limonite and saprolite ores in the bioleaching experiments using stirred tank reactors. The nickel bioleaching experiments inoculated with the bacterial consortia were carried out using coarse limonite ores and weathered saprolite ores with pulp density of 10% w/v. Abiotic controls were also carried out replacing the inocula by the sterile medium. The bioleaching processes were monitored by measuring Ni and Fe contents and pH of the leaching solution as well as the total bacterial enzymatic activity measured as FDA hydrolytic activity. The effect of leaching on the mineralogy of laterite ores was investigated by the scanning electron microscope equipped with energy-dispersive spectroscopy (SEM-EDS and X-ray powder diffraction (XRD. After 28 days of incubation, the FDA hydrolytic activity was observed in both bioleaching experiments containing limonite (17.2 μg fluorescein/mL and saprolite ores (16.9 μg fluorescein/mL. The leached Ni and Fe in the bioleaching experiments containing limonite ores (30% Ni and 5.6% Fe was greater than that in abiotic controls (1% Ni and 0.1% Fe with the pH range of 2.5 to 3.5. However, the bacterial consortia were less capable of bioleaching of Ni (2.5% with the similar leached Fe (6% from the saprolite ores. In abiotic controls, the medium pH remained relatively constant (pH 6. It was concluded that these bacterial isolated as the consortium were capable of nickel bioleaching (precious metal more effectively than iron (gangue metal, thus being applicable to the commercial processing of the difficult-to-process low-grade nickel laterite ores

  18. High-rate behaviour of iron ore pellet

    Directory of Open Access Journals (Sweden)

    Gustafsson Gustaf

    2015-01-01

    Full Text Available Iron ore pellets are sintered, centimetre-sized spheres of ore with high iron content. Together with carbonized coal, iron ore pellets are used in the production of steel. In the transportation from the pelletizing plants to the customers, the iron ore pellets are exposed to different loading situations, resulting in degradation of strength and in some cases fragmentation. For future reliable numerical simulations of the handling and transportation of iron ore pellets, knowledge about their mechanical properties is needed. This paper describes the experimental work to investigate the dynamic mechanical properties of blast furnace iron ore pellets. To study the dynamic fracture of iron ore pellets a number of split Hopkinson pressure bar tests are carried out and analysed.

  19. (234)U/(238)U signatures associated with uranium ore bodies: part 3 Koongarra.

    Science.gov (United States)

    Lowson, Richard T

    2013-04-01

    The Koongarra ore body is an early Proterozoic U ore body in the Alligator Rivers U province, Northern Territory, Australia. It has surface expression with a redox front located ∼30 m below the surface. The (234)U/(238)U activity ratios (AR) for the ground water and the amorphous phase of the solid have been analysed for the ore zone and dispersion halo as a function of depth. The results display a (234)U/(238)U AR signature with depth which may be common to all U ore bodies. The (234)U/(238)U AR is depressed below secular equilibrium in the weathered material above the redox front; rises significantly above secular equilibrium in the vicinity of the redox front; and is followed by a gradual decrease with depth below the redox front. The amplitude of the profile is a function of local conditions. A model is proposed for the signature in which oxidising waters preferentially leach the (234)U sites at the redox front due to preconditioning of the (234)U sites by α recoil during the decay of (23)(8)U to (23)(4)U. Mass balance requires the solid material left behind the redox front to have a (234)U/(238)U AR reduced below 1. Local second order effects may be superimposed on the signature. The signature may have application to calibrating scenarios for nuclear waste repositories, assisting in understanding historical climates, economic evaluation of U ore bodies and U exploration.

  20. Organic Geochemistry Characteristics in Ores and Host Rocks from Qixiashan Lead-Zinc Deposit, Nanjing, China

    Institute of Scientific and Technical Information of China (English)

    Xie Shucheng; Wang Hongmei; Guo Jianqiu; Liang Bin; Zhou Xiugao

    2003-01-01

    Organic matter, associated with ores, host rocks, ore source rocks and present in fluid inclusions in the Qixiashan lead-zinc polymetallic deposit hosted in Upper Carboniferous dolomites and limestones in East China, was systematically analyzed using Fourier transform infrared spectroscopy, gas chromatography (GC), GC/mass spectrometry and proton-induced X-ray emission. The biomarker ratios of nC-21-/nC+22-alkanes, C23-tricyclic/C30-hopane and the tricyclic terpane parameters including C21/C23, C19-20/C21-29 and C19-25/C26-29 can effectively discriminate ores from host rocks. Extractable organic matter present in fluid inclusions displays similarities to those enclosed in the ore source rocks in the biomarker ratios, suggesting that a proportion of organic matter was introduced into the deposit from the ore source strata. The presence of copper and zinc in stage Ⅱ pyrobitumen indicates that some metals may have been transported by an organic fluid or removed from an aqueous fluid by organic matter.

  1. Thermogravimetric Analysis and Kinetics on Reducing Low-Grade Manganese Dioxide Ore by Biomass

    Science.gov (United States)

    Zhang, Honglei; Zhu, Guocai; Yan, Hong; Li, Tiancheng; Feng, Xiujuan

    2013-08-01

    Nonisothermal thermogravimetric analysis (TGA) was applied to evaluate rice straw, sawdust, wheat stalk, maize straw, and bamboo to explore their potential for reduction of manganese dioxide ore. Results from the biomass pyrolysis experiments showed that wood-based biomass materials, such as sawdust and bamboo, could produce more reductive agents, while herb-based biomass materials, such as rice straw, wheat stalk, and maize straw, had lower reaction temperatures. The peak temperatures for biomass reduction tests were 20 K to 50 K (20 °C to 50 °C) higher compared with the pyrolysis tests, and a clear shoulder at around 523 K (250 °C) could be observed. The effects of heating rate, biomass/manganese dioxide ore ratio, and different components of biomass were also investigated. An independent parallel first-order reaction kinetic model was used to calculate the values of activation energy and frequency factor for biomass pyrolysis and reduction of manganese dioxide ore. For better understanding the reduction process, kinetic parameters of independent behavior of manganese dioxide ore were also calculated by simple mathematical treatment. Finally, the isokinetic temperature T i and the rate constant k 0 for reduction of manganese oxide ore by reductive volatiles of biomass were derived according to the Arrhenius equation, which were determined to be 603 K (330 °C) and 108.99 min-1, respectively.

  2. Ore fluid geochemistry of the Jinlongshan Carlin type gold ore belt in Shaanxi Province, China

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The Jinlongshan gold ore belt in southern Shaanxi Province contains a number of Carlin-type gold deposits in the Qinling collisional orogenic belt. Their fluid inclusions are of the Na+ - Cl- type. From the main metallogenic stage to later stages, the total quantity of anions and cations, temperature and deoxidation parameter (R) for fluid inclusions all gradu ally decreased, suggesting the gradual intensification of fluid oxidation, the reduction of met allogenic depth and the input of meteoric water and organic components. The deposits were formed during crustal uplifting and hence had similar tectonic settings to orogenic gold depos its. The CO2 contents and CO2/H2O values of the ore fluid increased from early to late sta ges, and the wall-rock alteration is represented by decarbonation, which is inconsistent with the characteristics of orogenic gold deposits. It is also discovered that Na + , K + ,SO42-, Cl-and the total amounts of anions and cations in the inclusions in quartz are higher than those in the coexisting calcite. The H, O and C isotope ratios indicate that the ore fluid was sourced from meteoric water and metamorphic devolatilisation of the sedimentary rocks that host the ores. The high background δ18O and δ13C values of wall rocks resulted in high δ18O and δ13 C values of ore fluid and also high δ 18 O and δ 13 C values of hydrothermal minerals such as quartz and carbonate. The carbon in ore fluid stemmed largely from the hosting strata. The δ 18O and δ13C values of Fe-calcite and the δD values of fluid inclusions are lower than those of calcite and quartz. In terms of the theory of coordination chemistry, all these differences can be ascribed to water-rock interaction in the same fluid system, instead, to the multi source of ore fluid.

  3. Influence analysis of secondary O-ring seals in dynamic behavior of spiral groove gas face seals

    Science.gov (United States)

    Hu, Songtao; Huang, Weifeng; Liu, Xiangfeng; Wang, Yuming

    2016-05-01

    The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior (steady-state performance and transient performance) of face seals. A numerical finite element method (FEM) model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.

  4. Cancer of the lung in iron ore (haematite) miners

    Science.gov (United States)

    Boyd, J. T.; Doll, R.; Faulds, J. S.; Leiper, J.

    1970-01-01

    Boyd, J. T., Doll, R., Faulds, J. S., and Leiper, J.(1970).Brit. J. industr. Med.,27, 97-105. Cancer of the lung in iron ore (haematite) miners. The mortality of Cumberland iron-ore miners has been studied by examining the death certificates of 5 811 men resident in two local authority areas (Ennerdale R.D. and Whitehaven M.B.) who died between 1948 and 1967. Comparison of the iron miners' experience with (1) that of other local men and (2) the relevant national experience has provided an assessment of the suspected occupational risk of lung cancer associated with haematite mining. During the 20-year period there were 42 deaths attributed to lung cancer among iron mine employees resident in the study area: 36 of these occurred in miners working underground, which was significantly greater than that expected from local non-mining (20·6 deaths) or national (21·5 deaths) experience. In contrast to these findings, there was no evidence of any excess mortality from lung cancer among surface workers and, for iron miners as a whole, mortality from other cancers was close to the national experience. A parallel analysis of mortality among coal miners showed a deficit of deaths from lung cancer in line with other studies. The patterns of other respiratory mortality in the two local mining groups were also in line with previous experience, and confirmed the existence of a substantial silicotic hazard associated with haematite mining in Cumberland. These findings strengthen previous necropsy evidence and indicate that West Cumberland iron-ore miners who work underground experience an occupational hazard of lung cancer. They suggest that the miners suffer a lung cancer mortality about 70% higher than `normal'. The risk may be due to radioactivity in the air of the mines (average radon concentration of 100 p Ci/litre) or to a carcinogenic effect of iron oxide. PMID:5448525

  5. Automated microscopic characterization of metallic ores with image analysis: a key to improve ore processing. I: test of the methodology; Reconocimiento automatizado de menas metalicas mediante analisis digital de imagen: un apoyo al proceso mineralurgico. I: ensayo metodologico

    Energy Technology Data Exchange (ETDEWEB)

    Berrezueta, E.; Castroviejo, R.

    2007-07-01

    Ore microscopy has traditionally been an important support to control ore processing, but the volume of present day processes is beyond the reach of human operators. Automation is therefore compulsory, but its development through digital image analysis, DIA, is limited by various problems, such as the similarity in reflectance values of some important ores, their anisotropism, and the performance of instruments and methods. The results presented show that automated identification and quantification by DIA are possible through multiband (RGB) determinations with a research 3CCD video camera on reflected light microscope. These results were obtained by systematic measurement of selected ores accounting for most of the industrial applications. Polarized light is avoided, so the effects of anisotropism can be neglected. Quality control at various stages and statistical analysis are important, as is the application of complementary criteria (e.g. metallogenetic). The sequential methodology is described and shown through practical examples. (Author)

  6. Dissolution of the possibility of compounds auriferous sulfide ores in chemical solvents, alternative cyanide

    Directory of Open Access Journals (Sweden)

    Tonkova N.V.,Tomchakova D.A.

    2012-09-01

    Full Text Available Possibility of the use of tiomochevin’s solutions as alternative the cyanides of gold solvents is considereded. It is established, that most effectively to use the offered technological process for extraction of gold from his associations with sulfides. Effectivity of a two-stage processing of gold ores, consisting of the biooxidation and dissolution of tiomocheviny connections stages is shown.

  7. A Comprehensive Utilization Process for Black Manganese-silver Ores by Pyrite Reducing Method

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    On a 5 kg bench scale, the separating of Mn-Ag from black manganese-silver ores by pyrite reducing was investigated. Leached Mn content of 98.3% (mass fraction) along with silver loss of 1.5% is achieved. The purification of solution by the precipitation method was effectively used. Chemical grade -MnO2 with TMn content of 60.13% (mass fraction) and MnO2 content of 92.28% (mass fraction) is obtained. Mn recovery efficiency is 94.04%. The residues from leaching Mn process of black Mn-Ag ores was employed for silver extraction by cyanidation with leached silver content of 92.17% (mass fraction), displacement ratio of 99.5%, recovery efficiency of 90.79%. Therefore, the present study provides a feasible process for making full use of black manganese-silver ore resources.

  8. Alkaline sulfide pretreatment of an antimonial refractory Au-Ag ore for improved cyanidation

    Science.gov (United States)

    Alp, Ibrahim; Celep, Oktay; Deveci, Haci

    2010-11-01

    This paper presents the alkaline sulfide pretreatment of an antimonial refractory gold and silver ore. In the ore, gold occurs mainly as gold-silver alloys and as associated with quartz and framboidal pyrite grains, and, to a small extent, as the inclusions within antimonial sulfides. Silver is present extensively as antimonial sulfides such as andorite. Alkaline sulfide pretreatment was shown to allow the decomposition of the antimonial sulfide minerals (up to 98% Sb removal) and to remarkably improve the amenability of gold (e.g., from silver (e.g., from leaching. An increase in reagent concentration (1-4 mol/L Na2S or NaOH) and temperature (20-80°C), and a decrease in particle size seem to produce an enhancing effect on metal extraction. These findings suggest that alkaline sulfide leaching can be suitably used as a chemical pretreatment method prior to the conventional cyanidation for antimonial refractory gold and silver ores.

  9. Thermal stress in North Western Australian iron ore mining staff.

    Science.gov (United States)

    Peiffer, Jeremiah J; Abbiss, Chris R

    2013-05-01

    Demand for Australian mined iron ore has increased employment within this sector, thus exposing increased numbers of workers to the harsh Australian climate. This study examined the influence of hot (>30°C wet bulb globe temperature) environmental temperatures, consistent with working in North Western Australia, on iron ore mining staff. Core temperature, hydration status, perceived exertion, mood, and fatigue state were measured in 77 participants at three time points (pre-, mid-, and post-shift) during a normal 12-h shift at an open-cut iron ore mining/processing site (n = 31; Site1) and an iron ore processing/shipping site (n = 46; Site2). A significant effect for time was observed for core temperature with greater mean core temperatures measured mid-shift (37.5±0.4°C) and post-shift (37.6±0.3°C) compared with pre-shift values (37.0±0.5°C). All mean core temperature measures were lower than ISO7933 thresholds (38°C) for thermal safety. Mean hydration measures [urine-specific gravity (USG)] were greater at Site1 (1.029±0.006) compared with those at Site2 (1.021±0.007). Furthermore, both pre- and post-shift measures from Site1 and the post-shift measures from Site2 were greater than the threshold for dehydration (USG = 1.020). No differences were observed for mood or perceived exertion over time; however, measures of fatigue state were greater post-shift compared with pre- and mid-shift values for both sites. Our findings indicate that the majority of mine workers in North Western Australia are able to regulate work rate in hot environments to maintain core temperatures below ISO safety guidelines; however, 22% of workers reached or exceeded the safety guidelines, warranting further investigation. Furthermore, hydration practices, especially when off-work, appear inadequate and could endanger health and safety.

  10. Australasian code for reporting of mineral resources and ore reserves (the JORC code)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    The latest revision of the Code first published in 1989 becomes effective in September 1999. It was prepared by the Joint Ores Reserves Committee of the Australasian Institute of Mining and Metallurgy, Australian Institute of Geoscientists and Minerals Council of Australia (JORC). It sets out minimum standards, recommendations and guidelines for public reporting of exploration results, mineral resources and ore reserves in Australasia. In this edition, the guidelines, which were previously separated from the Code, have been placed after the respective Code clauses. The Code is applicable to all solid minerals, including diamonds, other gemstones and coal for which public reporting is required by the Australian and New Zealand Stock Exchanges.

  11. Leaching of radionuclides from uranium ore and mill tailings ( Ra- 226, Tn-230).

    Science.gov (United States)

    Landa, E.R.

    1982-01-01

    The major part of the extractable uranium is associated with a readily acid-soluble fraction in both ore and tailings. The major part of the extractable 226Ra was associated with an iron, manganese hydrous-oxide fraction in the ore and tailings. Thorium-230 was the least leachable of the radionuclides studied. The major portion of the extractable 230Th was associated with alkaline-earth sulphate precipitates, organic matter, or both. The specific effects of milling on each of the nuclides are discussed.-Author

  12. [Leaching of copper ore of the Udokanskoe deposit at low temperatures by an association of acidophilic chemolithotrophic microorganisms].

    Science.gov (United States)

    Kondrat'eva, T F; Pivovarova, T A; Krylova, L N; Melamud, V S; Adamov, E V; Karavaĭko, G I

    2011-01-01

    Pure cultures of indigenous microorganisms Acidithiobacillus ferrooxidans strain TFUd, Leptospirillum ferrooxidans strain LUd, and Sulfobacillus thermotolerans strain SUd have been isolated from the oxidation zone of sulfide copper ore of the Udokanskoe deposit. Regimes of bacterial-chemical leaching of ore have been studied over a temperature range from -10 to +20 degrees C. Effects of pH, temperature, and the presence of microorganisms on the extraction of copper have been shown. Bacterial leaching has been detected only at positive values of temperature, and has been much more active at +20 than at +4 degrees C. The process of leaching was more active when the ore contained more hydrophilic and oxidized minerals. The possibility of copper ore leaching of the Udokanskoe deposit using sulfuric acid with pH 0.4 at negative values of temperature and applying acidophilic chemolithotrophic microorganisms at positive values of temperature and low pH values was shown.

  13. 矿山溜井卸矿结构优化%Optimization of Ore Dispatching Structure of Mine Chute

    Institute of Scientific and Technical Information of China (English)

    汪小东

    2016-01-01

    In view of the insufficient of the classical ore dispatching structure of mine chute,the ore dispatching structure parameters are optimized by analyzing the ore humping regularity based on PFC3D software,the results show that upper chute can be protected effectively by the optimized ore dispatching structure,besides that,the length serve of chute is extended.%针对传统溜井卸矿结构的不足,通过 PFC3D研究矿石溜放规律,优化了卸矿结构参数,提出了一种新型溜井卸矿结构。结果表明,此溜井卸矿结构可有效保护上部溜井,延长溜井服务年限。

  14. Iron ore weathering potentials of ectomycorrhizal plants.

    Science.gov (United States)

    Adeleke, R A; Cloete, T E; Bertrand, A; Khasa, D P

    2012-10-01

    Plants in association with soil microorganisms play an important role in mineral weathering. Studies have shown that plants in symbiosis with ectomycorrhizal (ECM) fungi have the potential to increase the uptake of mineral-derived nutrients. However, it is usually difficult to study many of the different factors that influence ectomycorrhizal weathering in a single experiment. In the present study, we carried out a pot experiment where Pinus patula seedlings were grown with or without ECM fungi in the presence of iron ore minerals. The ECM fungi used included Pisolithus tinctorius, Paxillus involutus, Laccaria bicolor and Suillus tomentosus. After 24 weeks, harvesting of the plants was carried out. The concentration of organic acids released into the soil, as well as potassium and phosphorus released from the iron ore were measured. The results suggest that different roles of ectomycorrhizal fungi in mineral weathering such as nutrient absorption and transfer, improving the health of plants and ensuring nutrient circulation in the ecosystem, are species specific, and both mycorrhizal roots and non-mycorrhizal roots can participate in the weathering process of iron ore minerals.

  15. Vertical mill simulation applied to iron ores

    Directory of Open Access Journals (Sweden)

    Douglas Batista Mazzinghy

    2015-04-01

    Full Text Available The application of vertical mills in regrind circuits is consolidated. This type of mill is now attracting interest in primary grinding applications, due to its higher efficiency when compared to ball mills, which are usually used at this stage. In this study, a coarse sample of iron ore was tested in a pilot scale grinding circuit with a vertical mill. Other three samples of pellet feed had already been tested with the methodology used in this study. The sample of coarse iron ore was characterized in laboratory tests carried out in a small batch ball mill. Selection and breakage function parameters were determined from the laboratory tests. The parameters were then used for simulating the pilot scale tests using Modsim™ software. The model previously implemented in Modsim™ has been successfully applied to represent the vertical mill operated with different ores. The simulations produced particle size distributions that were very close to the actual size distributions, and the predictions were accomplished only by imputing the calibrated parameters from the batch tests, the power draw and the feed size distribution of the pilot tests. The methodology is therefore useful for scale-up and simulation of vertical mills, only requiring laboratory tests that can be carried out in standard laboratory batch ball mills with small amounts of samples.

  16. Accelerating column leaching trial on copper sulfide ore

    Institute of Scientific and Technical Information of China (English)

    WANG Hongjiang; WU Aixiang; ZHOU Xun; WANG Shaoyong; ZHANG Jie

    2008-01-01

    The main measures to accelerate leaching sulfide ore are large spraying intensity,manual oxygen supply,temperature control and acclimated bacteria.The indoor experiment accelerating sulfide ore leaching detected the temperature during leaching process,dissolvability of oxygen,bacterial concentration,Cu concentration and slag grade.At the same time,this paper also analyzed the effect of four factors,which are bacterial diversity cultivation stage,spraying intensity,air supply,and whether to control temperature,on the leaching efficiency of copper.The results indicate that the oxygen content of leach solution has a close relationship with temperature but it is rarely affected by air supply.The bacterial concentration preserves from 106 to 107 mL-1,and temperature has a great effect on the bacterial activity under the condition of proper temperature and oxygen supply,and the lack of nutrition prevents the bacterial concentration from rising in the late stage.The relationships of the copper leaching efficiency to temperature,air feed,and spraying intensity are directly proportional.The leaching efficiencies of the cultivated bacteria and acclimation bacteria are 1.2 and 1.4 times as large as that of the original bacteria.

  17. Isotopic Characteristics of Mesozoic Au-Ag Polymetallic Ore Deposits in Northern Hebei and Their Ore-Forming Materials Source

    Institute of Scientific and Technical Information of China (English)

    王宝德; 牛树银; 孙爱群; 李红阳

    2003-01-01

    It has long been a controversy about the source of ore-forming materials of Au-Agpolymetallic deposits both in metallogenic theory and in ore-searching practice. In terms of alarge wealth of the isotopic statistics data from Indosinian-Yanshanian endogenic ore deposits innorthern Hebei (generally referring to the areas along the northern part of Taihang Mountainsand northern Hebei, the same below) , it is considered that the ore-forming materials came fromthe deep interior of the Earth, which had migrated through plumes to the Earth surface while ex-perienced multi-stage evolution and then emplaced progressively in favorable structural loci toform ores. Their isotope data show that 559 sulfur isotopic data from 40 ore deposits are, for themost part, within the range of - 5‰ - 5‰, with a high degree of homogenization, indicatingthat the sulfur is derived mainly from magma; 200 lead isotope data from 37 ore deposits indi-cate that the ore-forming materials are principally of mantle source though some crust-source ma-terial was involved; 96 oxygen, hydrogen and carbon isotope data from 34 ore deposits illustratethat the ore-forming fluids are dominated by magmatic water while other sources of water wouldbe involved. It may therefore be seen that the formation of endogenic deposits has nothing to dowith the strata.

  18. Physical-chemical conditions of ore deposition

    Science.gov (United States)

    Barton, P.B.

    1981-01-01

    Ore deposits form under a wide range of physical and chemical conditions, but those precipitating from hot, aqueous fluids-i.e. the hydrothermal deposits-form generally below 700??C and at pressures of only 1 or 2 kbar or less. Natural aqueous fluids in rocks may extract metal and sulfur from a variety of rock types or may acquire them as a residual heritage from a crystallizing silicate magma. Ore-forming hydrothermal fluids never appear as hot springs (except in deep, submarine situations) because they boil, mix with surface waters, and cool, thereby losing their ore-bearing ability before reaching the surface. Mineral systems function as chemical buffers and indicators just as buffers and indicators function in a chemical laboratory. By reading the record written in the buffer/indicator assemblages of minerals one can reconstruct many aspects of the former chemical environment. By studying the record of changing conditions one may deduce information regarding the processes functioning to create the succession of chemical environments and the ore deposits they represent. The example of the OH vein at Creede, Colorado, shows a pH buffered by the K-feldspar + muscovite + quartz assemblage and the covariation of S2 and O2 buffered by the assemblage chlorite + pyrite + quartz. Boiling of the ore fluid led to its oxidation to hematite-bearing assemblages and simultaneously produced an intensely altered, sericitic capping over the vein in response to the condensation of vapors bearing acidic components. The solubility of metals as calculated from experimental and theoretical studies of mineral solubility appears too low by at least one or two powers of ten to explain the mineralization at Creede. In contrast to Creede where the mineral stabilities all point to a relatively consistent chemistry, the Mississippi Valley type deposits present a puzzle of conflicting chemical clues that are impossible to reconcile with any single equilibrium situation. Thus we must

  19. Physical-chemical conditions of ore deposition

    Science.gov (United States)

    Barton, Paul B.

    Ore deposits form under a wide range of physical and chemical conditions, but those precipitating from hot, aqueous fluids-i.e. the hydrothermal deposits-form generally below 700°C and at pressures of only 1 or 2 kbar or less. Natural aqueous fluids in rocks may extract metal and sulfur from a variety of rock types or may acquire them as a residual heritage from a crystallizing silicate magma. Ore-forming hydrothermal fluids never appear as hot springs (except in deep, submarine situations) because they boil, mix with surface waters, and cool, thereby losing their ore-bearing ability before reaching the surface. Mineral systems function as chemical buffers and indicators just as buffers and indicators function in a chemical laboratory. By reading the record written in the buffer/indicator assemblages of minerals one can reconstruct many aspects of the former chemical environment. By studying the record of changing conditions one may deduce information regarding the processes functioning to create the succession of chemical environments and the ore deposits they represent. The example of the OH vein at Creede, Colorado, shows a pH buffered by the K-feldspar + muscovite + quartz assemblage and the covariation of S 2 and O 2 buffered by the assemblage chlorite + pyrite + quartz. Boiling of the ore fluid led to its oxidation to hematite-bearing assemblages and simultaneously produced an intensely altered, sericitic capping over the vein in response to the condensation of vapors bearing acidic components. The solubility of metals as calculated from experimental and theoretical studies of mineral solubility appears too low by at least one or two powers of ten to explain the mineralization at Creede. In contrast to Creede where the mineral stabilities all point to a relatively consistent chemistry, the Mississippi Valley type deposits present a puzzle of conflicting chemical clues that are impossible to reconcile with any single equilibrium situation. Thus we must

  20. 40 CFR 440.10 - Applicability; description of the iron ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Iron Ore Subcategory § 440.10 Applicability; description of the iron ore subcategory. The provisions of this subpart A are applicable to discharges from (a) mines operated to obtain iron ore, regardless of the type of ore...

  1. EXPLANATORY MODEL OF SPOT PRICE OF IRON ORE

    Directory of Open Access Journals (Sweden)

    Juan Enrique Villalva A.

    2015-11-01

    Full Text Available The objective of this study was to construct an explanatory model of the spot price of iron ore in the international market. For this, the method of multiple linear regressions was used. As a dependent variable, the spot price of iron ore (62% Fe China Tianjin port was taken, between 2010 and 2013. As independents variables were taken seven variables of international iron ore market. The resulting model includes variables: Iron ore inventory in Chinese ports, Baltic Dry Index (BDI, Iron ore exports from Brazil & Australia and Chinese Rebar Steel Price, as explanatory variables of the behavior of the spot price of iron ore in the international market. The model has an adjusted coefficient of determination R2 of 0.90, and was validated by comparing its predictions vs. known values of 2014.

  2. Genesis of Gold- Silver Deposits in Qingchengzi Ore Field

    Institute of Scientific and Technical Information of China (English)

    Wei Min

    2001-01-01

    The gold - silver complex ore field of Qingchengzi is located in Liaohe group of Liaodong rift. The gold - silver ore bodies mainly lie in Dashiqiao group and Gaixian group, which provides ore - forming materials for the mineralization. For taking place multi - period and multi - stage magmatic activities, the ore - forming materials in the formation had had dynamothermal metamorphism for a long time and enriched and formed ore bodies after magmatism in Indo- Chinese and Yanshan epoch. The ore bodies are controlled by stratigraphic formation and stored in the interformational faults and schistosity belts. Silicalite is the most important indicator for searching them. Although the Pb - Zn and the gold - silver deposits are the same series of mineralized products, their positions are different, resulting from the differences of elements nature and mineralized conditions. The gold silver deposits belong to strata - bound and hysterogenetic mesothermal - epithermal deposit.

  3. 攀西某稀土矿助磨剂试验探究%Study on the Effect of Grinding Aids for Rare Earth Ore

    Institute of Scientific and Technical Information of China (English)

    蒋恒; 陈良勇; 杨彬; 马晓艳

    2015-01-01

    以4种助磨剂对攀西某稀土矿进行磨矿试验.结果表明: 在相同磨矿条件下,六偏磷酸钠、三聚磷酸钠、柠檬酸钠、硅酸钠在加量为1.25 kg/t、1.05 kg/t、0.75 kg/t、0.75 kg/t时,产品中-0.074 mm粒级含量依次提高12.25%、6.5%、5%、4.75%.其中六偏磷酸钠在使用量为1.25 kg/t时,对稀土矿物的助磨效果最好.%The effects of hexametaphosphate, sodium tripolyphosphate, sodium citrate, sodium silicate, triethanolamine for rare earth orewere studied. As the results showed the four grinding aids can increasing the grinding efficiency in the same conditions. The contents of -0.074 mm in the grinding products were increased by 12.25%, 6.5%, 5% and 4.75%, withadding 1.25 kg/t hexametaphosphate, 1.05 kg/t sodium tripolyphosphate, 0.75 kg/t sodium citrate, 0.75 kg/t sodium silicate蒺s, successively. When the dosage of hexametaphosphate was 1.25 kg/t, it showed the best grinding efficiency.

  4. Differential interpretation of the results of well logging with scattered gamma radiation of radioactive ores

    Energy Technology Data Exchange (ETDEWEB)

    Davydov, Yu.B.; Kuzin, V.F.

    1979-01-01

    Studied are the possibilities of quantitative interpretation of the results of logging of scattered gamma radiation. Recording of the scattered gamma radiation of radioactive ores makes it possible in a number of cases to solve the questions of lithological separation of rocks and the identification of their substantive composition. The effectiveness of exploration of radioactive raw materials is increased.

  5. Source of ore-forming material for the Huangtuliang gold deposit, Hebei Province and ore prospecting in the deep periphery

    Institute of Scientific and Technical Information of China (English)

    NIU Shuyin; SUN Aiqun; WANG Baode; HAN Yuchou; WEI Minghui; ZHANG Hai; ZHANG Ge; SHI Ping; WANG Wenxing

    2008-01-01

    The Huangtuliang gold deposit is characterized by its wide and large ore belt, stable extension and closely spaced orebodies. Unfortunately, no orebody was found by deep drilling. As a result, ore prospecting in this region was once put into dilemma. Detailed analysis of ore-forming and ore-controlling structures in the mining district by the authors has revealed that the ore-forming and ore-controlling structure in this mining district is a steeply dipping (85°-110°/∠70°-85° N-NNE), spade-shaped ductile shear zone, and the ore-controlling structures are a series of nearly erected second-ordered faults which are developed in the upper part of the ductile shear zone, intersecting with the ductile shear zone. Deep cutting of the ductile shear zone made it possible the ascending of ore fluids from the mantle plume at depth and these ore fluids would migrate upwards along the ductile shear zone under certain temperature and pressure conditions. Along their ascending path, the ore fluids would extract ore-forming elements from the country rocks and the extracted ore-forming elements would be deposited as ores in the hanging-wall second-ordered faults. The reason why no orebody was found in early prospecting at depth is that northward-dipping drilling in the southern part of the shear zone extended so deeply as to be beneath the shear zone. Only shallow-level orebodies could be found by southward-dipping drilling practice in the northern part of the shear zone.The location where deep-seated orebodies occurred shifted northwards and the orebodies occurred at greater depth.Therefore, it is natural that no orebody could be found when drill core passed through the shear zone. After the ore-forming and ore-controlling structures were well understood, the focus of ore prospecting was placed on the deep-level, northward-penetrating veins. In this way a number of new blind orebodies of great thickness have been found. On the basis of research development in the mining

  6. Assessment of (222)Rn emanation from ore body and backfill tailings in low-grade underground uranium mine.

    Science.gov (United States)

    Mishra, Devi Prasad; Sahu, Patitapaban; Panigrahi, Durga Charan; Jha, Vivekanand; Patnaik, R Lokeswara

    2014-02-01

    This paper presents a comparative study of (222)Rn emanation from the ore and backfill tailings in an underground uranium mine located at Jaduguda, India. The effects of surface area, porosity, (226)Ra and moisture contents on (222)Rn emanation rate were examined. The study revealed that the bulk porosity of backfill tailings is more than two orders of magnitude than that of the ore. The geometric mean radon emanation rates from the ore body and backfill tailings were found to be 10.01 × 10(-3) and 1.03 Bq m(-2) s(-1), respectively. Significant positive linear correlations between (222)Rn emanation rate and the (226)Ra content of ore and tailings were observed. For normalised (226)Ra content, the (222)Rn emanation rate from tailings was found to be 283 times higher than the ore due to higher bulk porosity and surface area. The relative radon emanation from the tailings with moisture fraction of 0.14 was found to be 2.4 times higher than the oven-dried tailings. The study suggested that the mill tailings used as a backfill material significantly contributes to radon emanation as compared to the ore body itself and the (226)Ra content and bulk porosity are the dominant factors for radon emanation into the mine atmosphere.

  7. Study on Metallized Reduction and Magnetic Separation of Iron from Fine Particles of High Iron Bauxite Ore

    Science.gov (United States)

    Liu, Zheng-Gen; Chu, Man-Sheng; Wang, Zheng; Zhao, Wei; Tang, Jue

    2017-01-01

    High iron bauxite ore is a typical unmanageable polyparagenetic resource and owns high comprehensive utilization value. Separation of iron from fine particles of high iron bauxite ore by the process of metallized reduction and magnetic dressing was researched systemically. The effect of magnetic field intensity, reduction temperature, reduction time, mole ratio of fixed carbon to reducible oxygen (FC/O) and ore particles size on separation indexes was researched. The results show that, with the conditions of reduction temperature of 1,400 °C, reduction time of 180 min, FC/O of 2.0, ore particle size of -2.0 mm and magnetic field intensity of 40 KA/m, about 89.24 % of the iron could be removed from high iron bauxite ore as metallic iron. Meanwhile, 86.09 % of the aluminum is stayed in non-magnetic fraction as alumina. However, the formation of hercynite (FeAl2O4) limits the reduction rate of iron oxides to metallic iron. The lower reduction conditions and higher recovery ratio of iron could be achieved with adopting ore-coal composite agglomerates or adding catalyst.

  8. Sulfuric acid leaching of mechanically activated manganese carbonate ore

    Directory of Open Access Journals (Sweden)

    Kenan Yıldız

    2010-06-01

    Full Text Available Acidic leaching of mechanically activated manganese ore from Denizli – Tavas was investigated. The ore was activated mechanically in a planetary mill and the amorphisation in manganese structure was analyzed with X-ray diffraction. The parameters in acidic leaching of the ore were milling time, acid concentration and time. All experiments were performed at 25°C with solid to liquid ratio: 1/10. The activation procedure led to amorphization and structural disordering in manganese ore and accelerated the dissolution of manganese in acidic media.

  9. Tectonomagmatic Metallogenic System of Dexing Ore Field, Jiangxi, China

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    13 ore deposits and a large number of ore occurrences cluster in Dexing ore field which is 20 km long and 12 km wide. The tectonic evolution, magmatism, as well as the metallogeny are controlled by the Northeast Jiangxi deep-seated fracture belt (NJDFB). The source is believed to have been derived from the Meso-Neoproterozoic marine volcanism. The magmatic activity of Mesozoic I-type granite could have provided the metal elements, thermal fluid, heat, and the space for ore-forming processes. A unified geological model is proposed, which combines the tectonism, magmatism and metallogeny as the basic control of the giant metal mineralizations.

  10. Pros and Cons,Iron Ore Price Hikes

    Institute of Scientific and Technical Information of China (English)

    Tang Jingtao

    2008-01-01

    @@ Backaround Baostecl and CVRD reached an agreement on the price hikes of 65 percent and 71 percent in February.And in June Baosteel and Rio Tinto which is the largest iron ore company in Australia reached an agreement on the price hikes of 79.88 percent on the iron ore fines and 96.5 percent on the iron ore lumps.This is the first time that two kinds of the iron ore price grew at the same time in Asian market.

  11. Radon emanation from low-grade uranium ore.

    Science.gov (United States)

    Sahu, Patitapaban; Mishra, Devi Prasad; Panigrahi, Durga Charan; Jha, Vivekanand; Patnaik, R Lokeswara

    2013-12-01

    Estimation of radon emanation in uranium mines is given top priority to minimize the risk of inhalation exposure due to short-lived radon progeny. This paper describes the radon emanation studies conducted in the laboratory as well as inside an operating underground uranium mine at Jaduguda, India. Some of the important parameters, such as grade/(226)Ra activity, moisture content, bulk density, porosity and emanation fraction of ore, governing the migration of radon through the ore were determined. Emanation from the ore samples in terms of emanation rate and emanation fraction was measured in the laboratory under airtight condition in glass jar. The in situ radon emanation rate inside the mine was measured from drill holes made in the ore body. The in situ(222)Rn emanation rate from the mine walls varied in the range of 0.22-51.84 × 10(-3) Bq m(-2) s(-1) with the geometric mean of 8.68 × 10(-3) Bq m(-2) s(-1). A significant positive linear correlation (r = 0.99, p 222)Rn emanation rate and the ore grade was observed. The emanation fraction of the ore samples, which varied in the range of 0.004-0.089 with mean value of 0.025 ± 0.02, showed poor correlation with ore grade and porosity. Empirical relationships between radon emanation rate and the ore grade/(226)Ra were also established for quick prediction of radon emanation rate from the ore body.

  12. Remobilisation features and structural control on ore grade distribution at the Konkola stratiform Cu-Co ore deposit, Zambia

    OpenAIRE

    Torremans, K.; Gauquie, J.; Boyce, A. J.; Barrie, C.D.; Sikazwe, O.; Muchez, P.H.

    2013-01-01

    The Konkola deposit is a high grade stratiform Cu–Co ore deposit in the Central African Copperbelt in Zambia. Economic mineralisation is confined to the Ore Shale formation, part of the Neoproterozoic metasedimentary rocks of the Katanga Supergroup. Petrographic study reveals that the copper–cobalt ore minerals are disseminated within the host rock, sometimes concentrated along bedding planes, often associated with dolomitic bands or clustered in cemented lenses and in layer-parallel and irre...

  13. Fluid-solid interaction model for hydraulic reciprocating O-ring seals

    Science.gov (United States)

    Liao, Chuanjun; Huang, Weifeng; Wang, Yuming; Suo, Shuangfu; Liu, Ying

    2013-01-01

    Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.

  14. Role of ore mineralogy in optimizing conditions for bioleaching low-grade complex sulphide ores

    Institute of Scientific and Technical Information of China (English)

    P. A. OLUBAMBI; S. NDLOVU; J. H. POTGIETER; J. O. BORODE

    2008-01-01

    The role that ore mineralogy plays in understanding and optimizing the conditions favouring the bioleaching of complex sulphide ore containing high amounts of siderite was studied using mixed cultures of mesophilic bacteria, with emphasis on zinc,lead and copper recoveries. The influencing parameters investigated include particle size, stirring speed, volume of inoculum, pulp density, and pH. The results show that the mixed mesophilic cultures can extract about two and a half times the amount of zinc than copper over an equivalent period of time. The highest zinc and copper recoveries of 89.2% and 36.4% respectively are obtained at particle size of 75 μm, stirring speed of 150 r/min, pulp density of 10% (w/v), 12% (v/v) inoculum concentration, and a pH of 1.6. Variations in elemental composition within different particle sizes resulting from the mineralogy of the ore account for the bioleaching behaviour at varying particle sizes. The dissolution at varying pulp density, volume of inoculum, solution pH and the low solution potential observed are also influenced by ore mineralogy.

  15. Bioprocessing of ores: Application to space resources

    Science.gov (United States)

    Johansson, Karl R.

    The role of microorganisms in the oxidation and leaching of various ores (especially those of copper, iron, and uranium) is well known. This role is increasingly being applied by the mining, metallurgy, and sewage industries in the bioconcentration of metal ions from natural receiving waters and from waste waters. It is concluded that bioprocessing using bacteria in closed reactors may be a variable option for the recovery of metals from the lunar regolith. Obviously, considerable research must be done to define the process, specify the appropriate bacteria, determine the necessary conditions and limitations, and evaluate the overall feasibility.

  16. Project StORe: Social Science report

    OpenAIRE

    Burton, Guy

    2006-01-01

    There was widespread support across the social science research community regarding the aims of the StORe Project Nearly half of social science respondents claimed that both source-to-output and out-put-to source repositories would offer a ‘significant advantage to my work’; a third in both cases claimed it would be ‘useful but not of major significance’ Postgraduate students were generally more enthusiastic about source-to-output and output-to-source repositories than acade...

  17. Sedimentary exhalative nickel-molybdenum ores in south China

    Science.gov (United States)

    Lott, D.A.; Coveney, R.M.; Murowchick, J.B.; Grauch, R.I.

    1999-01-01

    Unique bedded Ni-Mo ores hosted by black shales were discovered in localized paleobasins along the Yangzte platform of southern China in 1971. Textural evidence and radiometric dates imply ore formation during sedimentation of black shales that grade into readily combustible beds, termed stone coals, which contain 10 to 15 percent organic carbon. Studies of 427 fluid inclusions indicate extreme variation in hydrothermal brine salinities that were contained by Proterozoic dolostones underlying the ore zone in Hunan and Guizhou. Variations of fluid inclusion salinities, which range from 0.1 to 21.6 wt percent NaCl equiv, are attributed to differences in the compositions of brines in strata underlying the ore bed, complicated by the presence of seawater and dilute fluids that represent condensates of vapors generated by boiling of mineralizing fluids or Cambrian meteoric water. The complex processes of ore deposition led to scattered homogenization temperatures ranging from 100??to 187??C within the Hunan ore zone and from 65??to 183??C within the Guizhou ore zone. While living organisms probably did not directly accumulate metals in situ in sufficient amounts to explain the unusually high grades of the deposits, sulfur isotope ratios indicate that bacteria, now preserved as abundant microfossils, provided sufficient sulfide for the ores by reduction of seawater sulfate. Such microbiota may have depended on vent fluids and transported organic matter for key nutrients and are consistent with a sedex origin for the ores. Vent fluids interacted with organic remains, including rounded fragments of microbial mats that were likely transported to the site of ore deposition by the action of waves and bottom currents prior to replacement by ore minerals.

  18. Melt Absorbability of Iron Ore Nuclei and Its Influence on Suitable Liquid Content of Sintered Body

    Science.gov (United States)

    Wu, Sheng-Li; Su, Bo; Qi, Yuan-Hong; Kou, Ming-Yin; Li, Yuan; Zhang, Wei-Li

    2017-10-01

    Sinter quasi-particles consist of nuclei particles and adhering fines. Therefore, reaction properties of the nuclei ore will ultimately affect the bonding strength of the sintered body. In this study, micro-sintering tests were conducted to explore the melt absorbability of nuclei ore and its effect on the suitable liquid content of the sintered body. The results showed that the melt absorbability is negatively correlated with the lowest assimilation temperature, and the most important mineralogy factor influencing melt absorbability is iron mineral type. The reaction behaviors of melts containing SiO2 or Al2O3 substrates are different, and the reaction process of the melt containing SiO2 is more complicated. In addition, the bonding strength of the sintered body is collectively determined by the liquid phase fluidity of adhering fines and the assimilability of nuclei ore. The high melt absorbability has an adverse effect on bonding strength, and it requires adhering fines to provide more primary melts to meet the requirements for sintered body bonding strength. In the condition with the same liquid content, for nuclei ore with stronger melt absorbability, an appropriate increase in the adhering fines ratio and reduction in segregation basicity are more conducive to improving the bonding strength.

  19. ANALYSIS OF EFFECTIVE APPROACHES FOR DEPRESSING MgO-CONTAINING GANGUE MINERALS IN COPPER-NICKEL SULFIDE ORE FLOATATION%铜镍硫化矿浮选过程中MgO脉石矿物的抑制途径探析

    Institute of Scientific and Technical Information of China (English)

    张亚辉; 孟凡东; 孙传尧

    2012-01-01

    Nickel ore resources in China are mostly low-grade copper-nickel sulfide ores with high percentage of MgO-containing silicate gangue minerals. Major copper-nickel mines in China, such as Jinchuan Group Ltd. , have been striving to lower the magnesium content of floatation concentrate. Although lots of researches have been done, the depressing of MgO-containing gangue minerals in copper-nickel sulfide ore floatation is not technically controllable. Related literatures on depressing of MgO-conVaining gangue minerals have been reviewed. It is suggested that highly effective composite depressant, that is, a completing agent - depressant combination, should be employed to depress MgO-containing silicate gangue minerals. A complexing agent is used to clean the surfaces of valuable minerals and gangue minerals, which will increase their floatability difference. In the meantime, a selective depressant is applied to depress MgO-containing gangue minerals. This will be the effective approach for depressing MgO-containing silicate minerals in copper-nickel sulfide ore floatation.%我国镍矿石资源主要为富含MgO硅酸盐脉石矿物的低品位铜镍硫化矿.长期以来,以金川公司为代表的主要铜镍矿山,一直将浮选精矿降镁作为选矿技术攻关的重点.尽管国内外研究人员开展了大量的研究工作,铜镍硫化矿浮选过程中MgO脉石矿物的抑制至今未能在技术上找到可控的解决方法.文章对MgO脉石矿物抑制研究的相关文献进行了综述分析,提出采用复合抑制剂,即络合剂-抑制剂组合,先对有用矿物和脉石矿物进行表面清洗以扩大其可浮性差异,再选择性抑制MgO脉石矿物,这将是铜镍硫化矿浮选过程中抑制MgO硅酸盐脉石矿物的有效途径.

  20. Assessment of health risks due to arsenic from iron ore lumps in a beach setting.

    Science.gov (United States)

    Swartjes, Frank A; Janssen, Paul J C M

    2016-09-01

    In 2011, an artificial hook-shaped peninsula of 128ha beach area was created along the Dutch coast, containing thousands of iron ore lumps, which include arsenic from natural origin. Elemental arsenic and inorganic arsenic induce a range of toxicological effects and has been classified as proven human carcinogens. The combination of easy access to the beach and the presence of arsenic raised concern about possible human health effects by the local authorities. The objective of this study is therefore to investigate human health risks from the presence of arsenic-containing iron ore lumps in a beach setting. The exposure scenarios underlying the human health-based risk limits for contaminated land in The Netherlands, based on soil material ingestion and a residential setting, are not appropriate. Two specific exposure scenarios related to the playing with iron ore lumps on the beach ('sandcastle building') are developed on the basis of expert judgement, relating to children in the age of 2 to 12years, i.e., a worst case exposure scenario and a precautionary scenario. Subsequently, exposure is calculated by the quantification of the following factors: hand loading, soil-mouth transfer effectivity, hand-mouth contact frequency, contact surface, body weight and the relative oral bioavailability factor. By lack of consensus on a universal reference dose for arsenic for use in the stage of risk characterization, three different types of assessments have been evaluated: on the basis of the current Provisional Tolerable Daily Intake (PTWI), on the basis of the Benchmark Dose Lower limit (BMDL), and by a comparison of exposure from the iron ore lumps with background exposure. It is concluded, certainly from the perspective of the conservative exposure assessment, that unacceptable human health risks due to exposure to arsenic from the iron ore lumps are unlikely and there is no need for risk management actions. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. AGING PERFORMANCE OF MODEL 9975 PACKAGE FLUOROELASTOMER O-RINGS

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, E.; Daugherty, W.; Skidmore, E.; Dunn, K.; Fisher, D.

    2011-05-31

    The influence of temperature and radiation on Viton{reg_sign} GLT and GLT-S fluoroelastomer O-rings is an ongoing research focus at the Savannah River National Laboratory. The O-rings are credited for leaktight containment in the Model 9975 shipping package used for transportation of plutonium-bearing materials. At the Savannah River Site, the Model 9975 packages are being used for interim storage. Primary research efforts have focused on surveillance of O-rings from actual packages, leak testing of seals at bounding aging conditions and the effect of aging temperature on compression stress relaxation behavior, with the goal of service life prediction for long-term storage conditions. Recently, an additional effort to evaluate the effect of aging temperature on the oxidation of the materials has begun. Degradation in the mechanical properties of elastomers is directly related to the oxidation of the polymer. Sensitive measurements of the oxidation rate can be performed in a more timely manner than waiting for a measurable change in mechanical properties, especially at service temperatures. Measuring the oxidation rate therefore provides a means to validate the assumption that the degradation mechanisms(s) do not change from the elevated temperatures used for accelerated aging and the lower service temperatures. Monitoring the amount of oxygen uptake by the material over time at various temperatures can provide increased confidence in lifetime predictions. Preliminary oxygen consumption analysis of a Viton GLT-based fluoroelastomer compound (Parker V0835-75) using an Oxzilla II differential oxygen analyzer in the temperature range of 40-120 C was performed. Early data suggests oxygen consumption rates may level off within the first 100,000 hours (10-12 years) at 40 C and that sharp changes in the degradation mechanism (stress-relaxation) are not expected over the temperature range examined. This is consistent with the known long-term heat aging resistance of

  2. PRACTICAL AND PREDICTIVE MODELLING OF ORE DEPOSITS IN HYDROTHERMAL SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    ZHAO Chong-bin; B.E.Hobbs; H.B.Muhlhaus; A.Ord

    2001-01-01

    @@ Over the past five years,we have been making efforts to develop a practical and predictive tool to explore for giant ore deposits in hydrothermal systems.Towards this goal,a significant progress has been made towards a better understanding of the basic physical and chemical processes behind ore body formation and mineralization in hydrothermal systems.

  3. PRACTICAL AND PREDICTIVE MODELLING OF ORE DEPOSITS IN HYDROTHERMAL SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Chong-bin; B.E.Hobbs; H.B.Muhlhaus; A.Ord

    2001-01-01

    Over the past five years,we have been making efforts to develop a practical and predictive tool to explore for giant ore deposits in hydrothermal systems.Towards this goal,a significant progress has been made towards a better understanding of the basic physical and chemical processes behind ore body formation and mineralization in hydrothermal systems.……

  4. Experimental study of ore gabbro liquid immiscibility

    Institute of Scientific and Technical Information of China (English)

    SANG; Zunan; XIA; Bin; ZHOU; Yongsheng; JIN; Zhenmin

    2005-01-01

    In this paper, the authors present the results of a preliminary experimental study on partial melting of fine-grained gabbro, Panzhihua, Sichuan Province, China. Experiments were conducted under (confining) pressure ranging from 450 to 500 MPa and temperature of 900-1200℃. The results show that the initial melt is distributed along grain boundaries and triple junctions. Liquid immiscibility phenomena are noted in the melt with two compositional different melt phases, i.e. matrix and sphere phases. The matrix phase is relatively rich in Si, Al and K, and is depleted in Mg, Fe, Ca, Na and Ti, whereas the sphere phase shows opposite trends. The calculation of the melt free energy indicates that the liquid immiscibility is governed by the rule of thermodynamics, as the liquid immiscibility would result in the decrease in free energy of the melt system. The field relationships suggest that the liquid immiscibility may have played an important role in the generation of ore magma of Panzhihua V-Ti magnetite ore deposit. This study thus provides experimental constraints on the mechanism of the formation of V-Ti magnetite deposite.

  5. Evaluating the Consequences of Edifice Instability-Related Processes in Hydrothermal Ore Genesis at Composite Volcanoes

    Science.gov (United States)

    Szakacs, A.

    2009-05-01

    Composite volcanoes intrinsically evolve toward instability, which is resolved through sudden (e.g. flank/edifice failure) or gradual (e.g. volcano-basement interaction) processes. They commonly host hydrothermal systems and related ore deposits within their edifices and shallow basement. The nature and extent of the influence instability-related processes exert on these hydrothermal systems and ore genesis are as yet poorly understood. Short-term effects are basically related to sudden depressurization of the system. The key factors determining the response of the hydrothermal system are its depth and maturity, and amount of depressurization. Deep excavation will lead to evisceration of the edifice-hosted hydrothermal system, dispersion of its volatiles in the atmosphere and incorporation of solid-phase components in the resulting debris avalanche deposit (DAD). When mature, such a system may provide DAD-hosted ore deposits. The fate of the deeper, basement-hosted hydrothermal system depends on its maturity. The evolution of an immature system will be aborted as a consequence of premature depressurization-driven boiling, and no ore-grade mineralization forms. Mature systems, however, will benefit from pressure drop and induced boiling by massive deposition of pressure-sensitive ore minerals and formation of high-grade ore. Long-range effects of edifice-failure are related to increase of the meteoric input into the hydrothermal system due to the formation of a large depression and reorganization of the surface hydrologic regime. Shift from high-T vapor-dominated regime to low-T dilute hydrothermal regime is its expected outcome. The influence of gradual release of edifice instability by volcano spreading and related phenomena on the hydrothermal system has not been studied so far. Deformation induced in both edifice and basement would result in change of fluid pathways according to the shift of local stress regimes between compressional and tensional, in turn

  6. Spatial data mining system for ore-forming prediction

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The authors designed the spatial data mining system for ore-forming prediction based on the theory and methods of data mining as well as the technique of spatial database, in combination with the characteristics of geological information data. The system consists of data management, data mining and knowledge discovery, knowledge representation. It can syncretize multi-source geosciences data effectively, such as geology,geochemistry, geophysics, RS. The system digitized geological information data as data layer files which consist of the two numerical values, to store these files in the system database. According to the combination of the characters of geological information, metallogenic prognosis was realized, as an example from some area in Heilongjiang Province. The prospect area of hydrothermal copper deposit was determined.

  7. Molybdenum removal from copper ore concentrate by sodium hypochlorite leaching

    Institute of Scientific and Technical Information of China (English)

    Liu Youcai; Zhong Hong; Cao Zhanfang

    2011-01-01

    The removal of molybdenum from a copper ore concentrate by sodium hypochlorite leaching was investigated. The results show that leaching time, liquid to solid ratio, leaching ternperature, agitation speed, and sodium hypochlorite and sodium hydroxide concentrations all have a significant effect on the removal of molybdenum. The optimum process operating parameters were found to be: time, 4 h: sodium hydroxide concentration, 10%; sodium hypochlorite concentration, 8%; liquid to solid ratio, 10:1; temperature, 50℃; and,agitation speed, 500 r/min. Under these conditions the extraction of molybdenum is greater than 99.9% and the extraction of copper is less than 0.01%. A shrinking particle model could be used to describe the leaching process. The apparent activation energy of the dissolution reaction was found to be approximately 8.8 kJ/mol.

  8. Removal of phosphorus from iron ores by chemical leaching

    Institute of Scientific and Technical Information of China (English)

    JIN Yong-shi; JIANG Tao; YANG Yong-bin; LI Qian; LI Guang-hui; GUO Yu-feng

    2006-01-01

    Alkali-leaching and acid-leaching were proposed for the dephosphorization of Changde iron ore, which contains an average of 1.12% for phosphorus content. Sodium hydroxide, sulfuriced, hydrochloric and nitric acids were used for the preparation of leach solutions. The results show that phosphorus occurring as apatite phase could be removed by alkali-leaching, but those occurring in the iron phase could not. Sulfuric acid is the most effective among the three kinds of acid. 91.61% phosphorus removal was attained with 1% sulfuric acid after leaching for 20 min at room temperature. Iron loss during acid-leaching can be negligible, which was less than 0.25%.The pH value of solution after leaching with 1% sulfuric acid was about 0.86, which means acid would not be exhausted during the process and it could be recycled, and the recycle of sulfuric acid solution would make the dephosphorization process more economical.

  9. Innovative methodology for comprehensive utilization of iron ore tailings: part 1. The recovery of iron from iron ore tailings using magnetic separation after magnetizing roasting.

    Science.gov (United States)

    Li, Chao; Sun, Henghu; Bai, Jing; Li, Longtu

    2010-02-15

    Iron ore tailings have become one kind of the most hazardous solid waste. In order to recycle iron in the tailings, we present a technique using magnetizing roasting process followed by magnetic separation. After analysis of chemical composition and crystalline phase, according to experimental mechanism, the effects of different parameters on recovery efficiency of iron were carried out. The optimum reaction parameters were proposed as the following: ratio of coal: iron ore tailings as 1:100, roasting at 800 degrees C for 30 min, and milling 15 min of roasted samples. With these optimum parameters, the grade of magnetic concentrate was 61.3% Fe and recovery rate of 88.2%. With this method, a great amount of iron can be reused. In addition, the microstructure and phase transformation of the process of magnetizing roasting were studied.

  10. Summary of the mineralogy of the Colorado Plateau uranium ores

    Science.gov (United States)

    Weeks, Alice D.; Coleman, Robert Griffin; Thompson, Mary E.

    1956-01-01

    In the Colorado Plateau uranium has been produced chiefly from very shallow mines in carnotite ores (oxidized vanadiferous uranium ores) until recent deeper mining penetrated black unoxidized ores in water-saturated rocks and extensive exploration has discovered many deposits of low to nonvanadiferous ores. The uranium ores include a wide range from highly vanadiferous and from as much as one percent to a trace of copper, and contain a small amount of iron and traces of lead, zinc, molybdenum, cobalt, nickel, silver, manganese, and other metals. Recent investigation indicates that the carnotite ores have been derived by progressive oxidation of primary (unoxidized) black ores that contain low-valent uranium and vanadium oxides and silicates. The uranium minerals, uraninite and coffinite, are associated with coalified wood or other carbonaceous material. The vanadium minerals, chiefly montroseite, roscoelite, and other vanadium silicates, occur in the interstices of the sandstone and in siltstone and clay pellets as well as associated with fossil wood. Calcite, dolomite, barite and minor amounts of sulfides, arsenides, and selenides occur in the unoxidized ore. Partially oxidized vanadiferous ore is blue black, purplish brown, or greenish black in contrast to the black or dark gray unoxidized ore. Vanadium combines with uranium to form rauvite. The excess vanadium is present in corvusite, fernandinite, melanovanadite and many other quadrivalent and quinquevalent vanadium minerals as well as in vanadium silicates. Pyrite and part or all of the calcite are replaced by iron oxides and gypsum. In oxidized vanadiferous uranium ores the uranium is fixed in the relatively insoluble minerals carnotite and tyuyamunite, and the excess vanadium commonly combines with one or more of the following: calcium, sodium, potassium, magnesium, aluminum, iron, copper, manganese, or barium, or rarely it forms the hydrated pentoxide. The relatively stable vanadium silicates are little

  11. Cohesive strength of iron ore granules

    Directory of Open Access Journals (Sweden)

    Contreras Rafael Jaimes

    2017-01-01

    Full Text Available We present an experimental and numerical investigation of the mechanical strength of crude iron ore (Hematite granules in which capillary bonds between primary particles are the source of internal cohesion. The strength is measured by subjecting the granules to vertical compression between two plates. We show that the behavior of the granules is ductile with a well-defined plastic threshold which increases with the amount of water. It is found that the compressive strength scales with capillary cohesion with a pre-factor that is nearly independent of size polydispersity for the investigated range of parameters but increases with friction coefficient between primary particles. This weak dependence may be attributed to the class of fine particles which, due to their large number, behaves as a cohesive matrix that controls the strength of the granule.

  12. Cohesive strength of iron ore granules

    Science.gov (United States)

    Contreras, Rafael Jaimes; Berger, Nicolas; Izard, Edouard; Douce, Jean-François; Koltsov, Alexey; Delenne, Jean-Yves; Azema, Emilien; Nezamabadi, Saeid; van Loo, Frédéric; Pellenq, Roland; Radjai, Farhang

    2017-06-01

    We present an experimental and numerical investigation of the mechanical strength of crude iron ore (Hematite) granules in which capillary bonds between primary particles are the source of internal cohesion. The strength is measured by subjecting the granules to vertical compression between two plates. We show that the behavior of the granules is ductile with a well-defined plastic threshold which increases with the amount of water. It is found that the compressive strength scales with capillary cohesion with a pre-factor that is nearly independent of size polydispersity for the investigated range of parameters but increases with friction coefficient between primary particles. This weak dependence may be attributed to the class of fine particles which, due to their large number, behaves as a cohesive matrix that controls the strength of the granule.

  13. Exact linear modeling using Ore algebras

    CERN Document Server

    Schindelar, Kristina; Zerz, Eva

    2010-01-01

    Linear exact modeling is a problem coming from system identification: Given a set of observed trajectories, the goal is find a model (usually, a system of partial differential and/or difference equations) that explains the data as precisely as possible. The case of operators with constant coefficients is well studied and known in the systems theoretic literature, whereas the operators with varying coefficients were addressed only recently. This question can be tackled either using Gr\\"obner bases for modules over Ore algebras or by following the ideas from differential algebra and computing in commutative rings. In this paper, we present algorithmic methods to compute "most powerful unfalsified models" (MPUM) and their counterparts with variable coefficients (VMPUM) for polynomial and polynomial-exponential signals. We also study the structural properties of the resulting models, discuss computer algebraic techniques behind algorithms and provide several examples.

  14. Improved polynomial remainder sequences for Ore polynomials.

    Science.gov (United States)

    Jaroschek, Maximilian

    2013-11-01

    Polynomial remainder sequences contain the intermediate results of the Euclidean algorithm when applied to (non-)commutative polynomials. The running time of the algorithm is dependent on the size of the coefficients of the remainders. Different ways have been studied to make these as small as possible. The subresultant sequence of two polynomials is a polynomial remainder sequence in which the size of the coefficients is optimal in the generic case, but when taking the input from applications, the coefficients are often larger than necessary. We generalize two improvements of the subresultant sequence to Ore polynomials and derive a new bound for the minimal coefficient size. Our approach also yields a new proof for the results in the commutative case, providing a new point of view on the origin of the extraneous factors of the coefficients.

  15. Rigid Ideals and Radicals of Ore Extensions

    Institute of Scientific and Technical Information of China (English)

    Chan Yong Hong; Tai Keun Kwak; S. Tariq Rizvi

    2005-01-01

    For an endomorphism σ of a ring R, Krempa called σ a rigid endomorphism if aσ(a) = 0 implies a= 0 for a ∈ R. A ring R is called rigid if there exists a rigid endomorphism of R. In this paper, we extend the σ-rigid property of a ring R to an ideal of R. For a σ-ideal Ⅰ of a ring R, we call Ⅰ a σ-rigid ideal if aσ(a) ∈Ⅰ implies a ∈Ⅰ for a ∈ R. We characterize σ-rigid ideals and study related properties. The connections of the prime radical and the upper nil radical of R with the prime radical and the upper nil radical of the Ore extension R[x; σ, δ], respectively, are also investigated.

  16. Super-Enrichment of Dispersed Elements and Associated Ore Deposits

    Institute of Scientific and Technical Information of China (English)

    高振敏; 姚林波

    2004-01-01

    Dispersed elements do not always occur as associated elements in the ore deposits of other elements. Instead, they can constitute independent ore deposits. The focus of this paper is placed on the mechanism of super-enrichment of the four dispersed elements TI, Ge, Se, and Te under favorable geological conditions, where their enrichment coefficients are so high that their abundances can reach n×103-n×104, sometimes even up to n×106 times (e. g. Te) those of the crust. As a result, they can form their independent ore deposits. Studies have shown that such independent ore deposits are mostly distributed in the southwestern part of China, most of which belong to low-temperature ore deposits, ranging in age from Yanshanian to Himalayan(Cretaceous to Cenozoic), with a significant time gap with the host strata. Moreover, this paper also deals with the existing forms (as independent minerals, occurring isomorphously and being adsorbed) of the dispersed elements in those independent ore deposits. The discovery of independent ore deposits of dispersed elements is a great breakthrough in the study of dispersed element metallogenesis.

  17. Sulfur isotope geochemistry of ore and gangue minerals from the Silesian-Cracow Mississippi Valley-type ore district, Poland

    Science.gov (United States)

    Leach, D.L.; Vets, J.G.; Gent, C.A.

    1996-01-01

    Studies of the sulfur isotopic composition of ore and gangue minerals from the Silesian-Cracow Zn-Pb district were conducted to gain insights into processes that controlled the location and distribution of the ore deposits. Results of this study show that minerals from the Silesian-Cracow ore district have the largest range of sulfur isotope compositions in sulfides observed from any Mississippi Valley-type ore district in the world. The ??34S values for sulfide minerals range from +38 to -32 per mil for the entire paragenetic sequence but individual stages exhibit smaller ranges. There is a well developed correlation between the sulfur isotope composition and paragenetic stage of ore deposition. The first important ore stage contains mostly positive ??34S values, around 5 per mil. The second stage of ore formation are lower, with a median value of around -5 to -15 per mil, and with some values as low as -32 per mil. Late stage barite contains isotopically heavy sulfur around +32 per mil. The range in sulfur isotope compositions can be explained by contributions of sulfur from a variety of source rocks together with sulfur isotope fractionations produced by the reaction paths for sulfate reduction. Much of the variation in sulfur isotope compositions can be explained by bacterial reduction of sedimentary sulfate and disequilibrium reactions by intermediate-valency sulfur species, especially in the late-stage pyrite and sphalerite. Organic reduction of sulfate and thermal release of sulfur from coals in the Upper Silesian Coal Basin may have been important contributors to sulfur in the ore minerals. The sulfur isotopic data, ore mineral textures, and fluid inclusion data, are consistent with the hypothesis that fluid mixing was the dominant ore forming mechanism. The rather distinct lowering of ?? 34S values in sulfides from stage 2 to stage 3 is believed to reflect some fundamental change in the source of reduced sulfur and/or hydrology of the ore

  18. [Spectral characteristics and implications of quartz from Heliao lead-zinc polymetallic ore district in the south of Qinzhou-Hangzhou joint belt].

    Science.gov (United States)

    Lü, Wen-Chao; Yang, Zhi-Jun; Zhou, Yong-Zhang; Li, Hong-Zhong; Zeng, Xiang-Qing; Chen, Qing; Liang, Jin; Zeng, Chang-Yu

    2013-05-01

    The XRD, FTIR and Raman spectrum were employed to study the characters of quartz from three types of rock samples, which are mineralized rock sample, near ore body rock sample and far away from ore body rock sample in Heliao lead-zinc polymetallic ore district. The research shows that the quartz in the mineralized rock and far away from ore body rock is pure, while the quartz in near ore body rock contains a small amount of impurities. But such small amounts of impurities did not cause apparent change in the quartz lattice parameters. From far away from ore body rock-->near ore body rock-->mineralized rock, the crystallinity and order degree of quartz are higher and higher. And the quartz in the mineralized rock has a trend to change into low symmetry quartz. It's a unique to mineralized rock that the quartz's absorption peak at 1 050 cm(-1) was split into two strongest ones. It can be used as the signs of whether exists mineralization. The cause for the quartz microstructure changes may be related to the activities of late mineralized hydrothermal fluids. Late hydrothermal influence was very weak to the quartz far away from ore body rock. And through the impact of the multi-stage hydrothermal effect, the quartz in mineralized rock may be purified by recrystallization and structural adjustment. However the quartz in near ore body rock didn't have enough hydrothermal influence, so it's not pure. Genealogy research technology is a useful technique for in-depth exploration of study area mineralization process and metallogenic regularity.

  19. Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics

    Institute of Scientific and Technical Information of China (English)

    Jiu-shuai Deng; Shu-ming Wen; Jian-ying Deng; Dan-dan Wu

    2015-01-01

    Sulfamic acid (SA), which possesses a zwitterionic structure, was applied as a leaching reagent for the first time for extracting copper from copper oxide ore. The effects of reaction time, temperature, particle size, reagent concentration, and stirring speed on this leach-ing were studied. The dissolution kinetics of malachite was illustrated with a three-dimensional diffusion model. A novel leaching effect of SA on malachite was eventually demonstrated. The leaching rate increased with decreasing particle size and increasing concentration, reac-tion temperature and stirring speed. The activation energy for SA leaching malachite was 33.23 kJ/mol. Furthermore, the effectiveness of SA as a new reagent for extracting copper from copper oxide ore was confirmed by experiment. This approach may provide a solution suitable for subsequent electrowinning. In addition, results reported herein may provide basic data that enable the leaching of other carbonate miner-als of copper, zinc, cobalt and so on in an SA system.

  20. Water leaching of titanium from ore flotation residue.

    Science.gov (United States)

    Jaworska, Malgorzata M; Guibal, Eric

    2003-01-01

    Copper ore tailings were tested for the stability of titanium submitted to water leaching in three different reactor systems (agitated vessel, bioreactor and percolated fixed-bed column). For each of these systems, titanium extraction did not exceed 1% of the available metal. Biomass removed from ore residue adsorbed a small part of the titanium with sorption capacities below 20-30 mg g(-1), but most of this biomass was sequestered in the ore residue. Oxygen and carbon dioxide concentrations were monitored and changes in concentration correlated with bacteria development at the initial stage of the process and to fungal development in the latter stages.

  1. Microstructure of Bentonite in Iron Ore Green Pellets

    OpenAIRE

    Bhuiyan, Iftekhar U.; Mouzon, Johanne; Schröppel, Birgit; Kaech, Andres; Dobryden, Illia; Forsmo, Seija P.E.; Hedlund, Jonas

    2017-01-01

    Sodium-activated calcium bentonite is used as a binder in iron ore pellets and is known to increase strength of both wet and dry iron ore green pellets. In this article, the microstructure of bentonite in magnetite pellets is revealed for the first time using scanning electron microscopy. The microstructure of bentonite in wet and dry iron ore pellets, as well as in distilled water, was imaged by various imaging techniques (e.g., imaging at low voltage with monochromatic and decelerated beam ...

  2. Biological-Chemical Oxidation of Ore Minerals at Pezinok Deposit

    Directory of Open Access Journals (Sweden)

    Martin Chovan

    2004-12-01

    Full Text Available The article presents results of leaching experiments of the comparison between chemical and biological-chemical leaching, at the same conditions in solution, of ores from the Sb-(Au- base metal deposit Pezinok (Malé Karpaty Mts., Western Carpathians, Slovakia. The research study shows the oxidation order and the progression of present ore minerals (löllingite, arsenopyrite, stibnite, native Sb, gudmundite, berthierite, pyrite, sphalerite and chalcopyrite. There are discussed differences between chemical and biological-chemical leaching activity of various ore minerals at the surface of polished sections. The extent of the leaching of sulphide minerals is significantly higher than that without bacteria.

  3. Tourmaline as a recorder of ore-forming processes

    Science.gov (United States)

    Slack, J.F.; Trumbull, R.B.

    2011-01-01

    Tourmaline occurs in diverse types of hydrothermal mineral deposits and can be used to constrain the nature and evolution of ore-forming fl uids. Because of its broad range in composition and retention of chemical and isotopic signatures, tourmaline may be the only robust recorder of original mineralizing processes in some deposits. Microtextures and in situ analysis of compositional and isotopic variations in ore-related tourmaline provide valuable insights into hydrothermal systems in seafl oor, sedimentary, magmatic, and metamorphic environments. Deciphering the hydrothermal record in tourmaline also holds promise for aiding exploration programs in the search for new ore deposits.

  4. Start of exploration and mining of uranium ores in Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Mikolay, I.; Szomolanyi, G. (Mecseki Ercbanyaszati Vallalat, Pecs II (Hungary))

    1983-09-01

    The mining of uranium ores is the youngest branch in the history of the Hungarian ore mining. The exploration for uranium ores started in Hungary in the decade from 1947, using simple methods at the beginning to apply more developed technologies later on. From the year 1952 Soviet geologists and geophysicists joined the explorations using the most advanced instruments, in co-operation with the Hungarian experts. From 1953 explorations and developments have been concentrated on the SW area of Mountain Mecsek so that by 1957 the preliminary conditions of a successful Hungarian uranium mining were established.

  5. Kinetic Investigations on the Leaching of Niobium from a Low-Grade Niobium-Tantalum Ore by Concentrated KOH Solution

    Institute of Scientific and Technical Information of China (English)

    周宏明; 郑诗礼; 张懿

    2004-01-01

    The leaching kinetics of niobium from a low-gr~te niobium-tantalum ore by concentrated KOH solution under atmospheric pressure has been studied. Significant effects of reaction temperature, KOH concentration,stirring speed, particle size and mass ratio of alkali-to-ore on the dissolution rate of niobium were examined. The experimental data of the leaching rates and the observed effects of the relevant operating variables were well interpreted with a shrinking core model under diffusion control. By using the Arrhenius expression, the apparent activation energy for the dissolution of niobium was evaluated. Finally, on the base of the shrinking core model, the rate equation was established.

  6. 40 CFR 440.90 - Applicability; description of the antimony ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... antimony ore subcategory. 440.90 Section 440.90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.90 Applicability; description of the antimony ore subcategory. The provisions of...

  7. 40 CFR 440.20 - Applicability; description of the aluminum ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... aluminum ore subcategory. 440.20 Section 440.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Aluminum Ore Subcategory § 440.20 Applicability; description of the aluminum ore subcategory. The provisions of...

  8. 40 CFR 440.50 - Applicability; description of the titanium ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... titanium ore subcategory. 440.50 Section 440.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Titanium Ore Subcategory § 440.50 Applicability; description of the titanium ore subcategory. The provisions of...

  9. 40 CFR 440.70 - Applicability; description of the nickel ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... nickel ore subcategory. 440.70 Section 440.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Nickel Ore Subcategory § 440.70 Applicability; description of the nickel ore subcategory. The provisions of this...

  10. 40 CFR 440.40 - Applicability; description of the mercury ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... mercury ore subcategory. 440.40 Section 440.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Mercury Ore Subcategory § 440.40 Applicability; description of the mercury ore subcategory. The provisions of subpart...

  11. 40 CFR 440.110 - Applicability; description of the platinum ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... platinum ore subcategory. 440.110 Section 440.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.110 Applicability; description of the platinum ore subcategory. The provisions of...

  12. 40 CFR 440.60 - Applicability; description of the tungsten ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... tungsten ore subcategory. 440.60 Section 440.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Tungsten Ore Subcategory § 440.60 Applicability; description of the tungsten ore subcategory. The provisions of...

  13. Comparison of finite difference and pseudo-spectral methods in forward modelling based on metal ore model of random media

    Institute of Scientific and Technical Information of China (English)

    LIU Dongyu,HAN Liguo,ZHANG Pan; XU Dexin

    2016-01-01

    With more applications of seismic exploration in metal ore exploration,forward modelling of seismic wave has become more important in metal ore.Finite difference method and pseudo-spectral method are two im-portant methods of wave-field simulation.Results of previous studies show that both methods have distinct ad-vantages and disadvantages:Finite difference method has high precision but its dispersion is serious;pseudo-spectral method considers both computational efficiency and precision but has less precision than finite-diffe-rence.The authors consider the complex structural characteristics of the metal ore,furthermore add random media in order to simulate the complex effects produced by metal ore for wave field.First,the study introduced the theories of random media and two forward modelling methods.Second,it compared the simulation results of two methods on fault model.Then the authors established a complex metal ore model,added random media and compared computational efficiency and precision.As a result,it is found that finite difference method is better than pseudo-spectral method in precision and boundary treatment,but the computational efficiency of pseudo-spectral method is slightly higher than the finite difference method.

  14. Selective autocatalytic reduction of NO from sintering flue gas by the hot sintered ore in the presence of NH3.

    Science.gov (United States)

    Chen, Wangsheng; Luo, Jing; Qin, Linbo; Han, Jun

    2015-12-01

    In this paper, the selective autocatalytic reduction of NO by NH3 combined with multi-metal oxides in the hot sintered ore was studied, and the catalytic activity of the hot sintered ore was investigated as a function of temperature, NH3/NO ratio, O2 content, H2O and SO2. The experimental results indicated that the hot sintered ore, when combined with NH3, had a maximum denitration efficiency of 37.67% at 450 °C, 3000 h(-1) gas hourly space velocity (GHSV) and a NH3/NO ratio of 0.4/1. Additionally, it was found that O2 played an important role in removing NOx. However, high O2 content had a negative effect on NO reduction. H2O was found to promote the denitration efficiency in the absence of SO2, while SO2 inhibited the catalytic activity of the sintered ore. In the presence of H2O and SO2, the catalytic activity of the sintered ore was dramatically suppressed.

  15. Geochemistry of Rare Earth Elements in Xikeng Ag-Pb-Zn Ore Deposit, South Anhui, China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, a comparative study is done on the geochemical charateristics of REE in ore, ore-hosted rocks of Lantian group, granite related to ore deposit, and altered rocks for tracing origin of ore-forming materials. The result indicates that the ore-forming fluid and ore-forming materials for Xikeng silver-polymetallic ore deposit were derived from Yixian granite's magmatic activity. Water-rock reaction of the hydrothermal fluid with the carbonate-rich stratum led the altered rock to relatively enrich in HREE.

  16. Studies on Sulfating Roasting Process for Mianning Bastnasite and Baotou Mixed RE Concentrate Ore

    Institute of Scientific and Technical Information of China (English)

    Miao Guangli

    2004-01-01

    Some processes of sulfating roasting and water leaching of crude Mianning RE concentrate ore, of fine Mianning RE concentrate ore, of Baotou RE concentrate ore and of their mixture were investigated.The result shows that the mixture of Mianning and Baotou RE concentrate ore has the optimum leaching rate and rate of recovery when the mixture ratio is 1:4.The recovery rate of the mixture is higher by 14.76% than that of crude Mianning RE concentrate ore, by 5.0 % than that of Mianning fine RE concentrate ore and by 2.4 % than that of Baotou RE concentrate ore.

  17. Experimental study on preferential solution flow during dump leaching of low-grade ores

    Institute of Scientific and Technical Information of China (English)

    YIN Sheng-hua; WU Ai-xiang; SU Yong-ding; ZHANG Jie

    2007-01-01

    The phenomenon of preferential solution flow during dump leaching of low-grade ores was studied. The formative mechanism of preferential solution flow was investigated through analyzing the relationship between permeability and ore diameter,and the relationship between surface tension and ore diameter. The preferential solution flow happened within the fine ore area when the dump was unsaturated. And it could happen within the coarse ore area when the dump became saturated. The results of experiment show that the outflow of coarse ore area increases sharply with higher applied rate. The outflow of fine ore area is greater than that of coarse ore area when the applied rate is below 3.2 L/min, and the preferential solution flow happens in fine ore area. But the preferential solution flow happens in coarse ore area when the applied rate is higher than 3.2 L/min. The result of the experiment is consistent with the mechanism analyzing.

  18. Nonlinear viscoelastic response of carbon black-filled butyl rubber and implications for o-ring aging

    Energy Technology Data Exchange (ETDEWEB)

    Adolf, D.

    1997-11-01

    Butyl rubber, unfortunately, has pronounced nonlinear viscoelastic behavior, which may be modelled by a separable KBKZ formalism. While these effects seem to have minimal impact on accelerated sealing force measurements, they do severely impact compression set tests. Therefore, a new test is suggested for evaluating field-return o-rings which is free from such confounding effects.

  19. Arsenic bioleaching in medical realgar ore and arsenic- bearing ...

    African Journals Online (AJOL)

    medical realgar ore that allowed much higher leaching rates ... bioleaching behavior between mixed unadapted ... Acid drainage from copper mine, Zhongtiao Mountain, Shanxi,. China ..... during high temperature bioleaching of gold-bearing.

  20. ITABIRITE IRON ORE CONCENTRATION BY PNEUMATIC FLOTATION CELL

    Directory of Open Access Journals (Sweden)

    Angelo Quintiliano Nunes da Silva

    2015-06-01

    Full Text Available The main iron ore processing plants in Brazil operate through reverse cationic flotation. Many studies have been conducted in order to improve flotation efficiency by optimization process variables. The pneumatic flotation cell stands out due to the simplicity to and to the intense contact particle/bubble promoted by the pulp feeding system. In this study, laboratory scale and pilot were conducted using a sample of itabirite iron ore. The objectives are evaluating the performance of this device using low grade iron ore, and drawing a comparison with laboratory scale tests on conventional flotation cell. The results indicate the potential application of pneumatic flotation cell to the ore tested. Adjustments in the feed particle size and process optimizations can be performed on the concentrate, reaching Fe and SiO2 grades used by the industry

  1. Microstructure of bentonite in iron ore green pellets.

    Science.gov (United States)

    Bhuiyan, Iftekhar U; Mouzon, Johanne; Schröppel, Birgit; Kaech, Andres; Dobryden, Illia; Forsmo, Seija P E; Hedlund, Jonas

    2014-02-01

    Sodium-activated calcium bentonite is used as a binder in iron ore pellets and is known to increase strength of both wet and dry iron ore green pellets. In this article, the microstructure of bentonite in magnetite pellets is revealed for the first time using scanning electron microscopy. The microstructure of bentonite in wet and dry iron ore pellets, as well as in distilled water, was imaged by various imaging techniques (e.g., imaging at low voltage with monochromatic and decelerated beam or low loss backscattered electrons) and cryogenic methods (i.e., high pressure freezing and plunge freezing in liquid ethane). In wet iron ore green pellets, clay tactoids (stacks of parallel primary clay platelets) were very well dispersed and formed a voluminous network occupying the space available between mineral particles. When the pellet was dried, bentonite was drawn to the contact points between the particles and formed solid bridges, which impart strength to the solid compact.

  2. ENVIRONMENTAL ISSUE IN COPPER ORE FLOTATION BY XANTHATES

    National Research Council Canada - National Science Library

    Zoran Markovic

    2015-01-01

      This paper presents some investigation results about potassium ethyl xanthate (PEX) stability in water solution at higher pH and in presence of mineral chalcopyrite, related to flotation of copper minerals from copper ore...

  3. Measurement and Modelling of Blast Movement to Reduce Ore ...

    African Journals Online (AJOL)

    user

    growth both from new discoveries and the develop- ment of Subika ... search have developed innovative tools and tech- niques to .... 7 Histogram of Horizontal Blast Displace ment from All Five .... Better QA/QC along the ore/waste boundaries.

  4. Radioanalysis of RE enrichment of ion adsorption type RE ores

    CERN Document Server

    Zhao Shu Quan; Hu He Ping; Li Fu Sheng; Chen Ying Min; LiuShiMing

    2002-01-01

    Objective: To analyze the radioactivity in Rare Earth (RE) enrichment of ion adsorption type RE ores. Methods: Using HPGe-gamma spectrometer to analyze the activity ratio of gamma radionuclides in kind of samples, using FJ-2603 low background alpha, beta measurement apparatus to measure their total alpha and total beta activities, and using X-ray fluorescence spectrometer to analyze contents of La sub 2 O sub 3 and Y sub 2 O sub 3 , respectively. Results: HPGe gamma spectroscopy and X-ray fluorescence spectroscopy are simple, convenient and non-destructive methods of analyzing radionuclides and La sub 2 O sub 3 , Y sub 2 O sub 3 in RE enrichment of ion adsorption type RE ores, respectively. Conclusion: The basic data were provided for radiation protection and treatment of gas, liquid and solid waste in RE production of ion adsorption type RE ores; method and experience were provided for studying ion adsorption type RE ores

  5. By lithology Zbruch deposits (Lower Sarmatian Nikopol manganese ore Basin

    Directory of Open Access Journals (Sweden)

    Bogdanovich V.V.

    2010-06-01

    Full Text Available Based on lithologic-paleogeographic study Zbruch layers of Nikopol manganese ore Basin sediments described lithological and genetic types of rocks and facies conditions of formation of deposits.

  6. Leaching kinetics of molybdenum from Ni-Mo ore in sulfuric acid solution with sodium peroxodisulfate as oxidant

    Institute of Scientific and Technical Information of China (English)

    刘志雄; 尹周澜; 陈义光; 熊利芝

    2015-01-01

    The leaching kinetics of molybdenum from Ni-Mo ore in sulfuric acid solution with sodium peroxodisulfate was studied. The effects including leaching temperature, reaction time, particle size, stirring speed, and concentrations of sulfuric acid and sodium peroxodisulfate were investigated. The leaching process of molybdenum from Ni-Mo ore is controlled by the chemical reaction through the solid layer across the unreacted shrinking core. The apparent activation energy of the leaching of molybdenum is calculated to be 41.0 kJ/mol and the leaching kinetics equation of molybdenum from Ni-Mo ore is expressed as 1−(1−a)1/3=3405.7exp[−41030.0/(RT)]t.

  7. Genetic Pd, Pt, Au, Ag, and Rh mineralogy in Noril'sk sulfide ores

    Science.gov (United States)

    Spiridonov, E. M.; Kulagov, E. A.; Serova, A. A.; Kulikova, I. M.; Korotaeva, N. N.; Sereda, E. V.; Tushentsova, I. N.; Belyakov, S. N.; Zhukov, N. N.

    2015-09-01

    early PGM in combination with the newly formed mineral species Sb-paolovite-insizwaite-geversite-maslovite, niggliite, tetraferroplatinum, rustenburgite-atokite-zvyagintsevite, moncheite, majakite, plumbopalladinite, polarite in association with altaite. The late minerals of the middle stage include stannopalladinite, tatianaite-taimyrite, Ag-Pd-Pt tetraauricupride, and cuproauride. PGM and Au-Ag minerals of the late stage are represented by sobolevskite-sudburyite-kotulskite, maslovite-michenerite, low-Sb paolovite, hessite, cabriite, Au-Ag minerals with fineness of 870-003, froodite, Sb-free insizwaite, Bi-free geversite, and Sb-free niggliite. Electrum and küstelite in PGM aggregates are not zoned. Crystals of Au-Ag minerals that grow over PGM minerals are smoothly zoned. Their zoning may be direct (crystal margins are enriched in Ag), inverse, oscillatory, and complex. Despite favorable annealing conditions, exsolution structures are not identified in Au-Ag minerals from the Noril'sk ores. Sperrylite—the latest of pneumatolytic PGM—occurs as metacrysts up to 14 cm in size. Sperrylite, which replaces high-Sb minerals, contains up to 11 wt % Sb. Pneumatolytic noble-metal minerals originated under the effect of the fluids released during crystallization of sulfide melts in an extremely reductive setting and at extremely low fS2; temperature drops from ~450 to ~350°C. Metamorphic-hydrothermal Ag mineralization (native silver, Hg-silver, sulfides and selenides, chalcopyrite-lenaite solid solutions, argentopentlandite), Pd mineralization (vysotskite, palladoarsenide, vincentite, Sb-free Ag-paolovite, malyshevite, native palladium), and Pt mineralization (kharaelakhite, cooperite, native platinum) develop in those parts of orebodies that are affected by low-grade metamorphism.

  8. XPS and FTIR spectroscopic study on microwave treated high phosphorus iron ore

    Energy Technology Data Exchange (ETDEWEB)

    Omran, Mamdouh, E-mail: mamdouh.omran@oulu.fi [Process Metallurgy Research Group, Faculty of Technology, University of Oulu (Finland); Mineral Processing and Agglomeration Lab, Central Metallurgical Research and Development Institute, Cairo (Egypt); Fabritius, Timo [Process Metallurgy Research Group, Faculty of Technology, University of Oulu (Finland); Elmahdy, Ahmed M.; Abdel-Khalek, Nagui A. [Mineral Processing and Agglomeration Lab, Central Metallurgical Research and Development Institute, Cairo (Egypt); El-Aref, Mortada; Elmanawi, Abd El-Hamid [Geology Department, Faculty of Science, Cairo University, Giza 12613 (Egypt)

    2015-08-01

    Highlights: • The effect of microwave radiation on structure and chemical state of high phosphorus iron ore was studied. • FTIR analyses showed that after microwave radiation the functional chemical groups of phosphorus bearing minerals (fluorapatite) dissociated. • High resolution XPS analyses of Fe 2p peaks showed that after microwave radiation a portion of Fe(+III) was reduced to Fe(+II). • Microwave radiation had a positive effect on the magnetic properties of iron oxide, through formation of ferromagnetic phases. - Abstract: A growing interest in microwave heating has emerged recently. Several potential microwave applications regarding minerals’ processing have been investigated. This paper investigates the effect of microwave radiation on Egyptian high phosphorus iron ore. Three different iron ore samples have varying Fe{sub 2}O{sub 3} and P{sub 2}O{sub 5} contents and mineralogical textures were studied. A comparative study has been carried out between untreated and microwave treated iron ore. XRD and FTIR analyses showed that after microwave radiation the crystallinity of iron bearing minerals (hematite) increased, while the functional chemical groups of phosphorus bearing minerals (fluorapatite) and other gangues dissociated. High resolution XPS analyses of Fe 2p peaks showed that after microwave radiation a portion of Fe(+III) was reduced to Fe(+II). This means that after microwave radiation iron oxide (hematite, Fe{sup 3+}) transformed into more magnetic phase. The results indicated that microwave radiation had a positive effect on the magnetic properties of iron oxide, through formation of ferromagnetic phases.

  9. Uranium and thorium recovery in thorianite ore-preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Gaiotte, Joao V.M. [Universidade Federal de Alfenas, Pocos de Caldas, MG (Brazil); Villegas, Raul A.S.; Fukuma, Henrique T., E-mail: rvillegas@cnen.gov.br, E-mail: htfukuma@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Pocos de Caldas, MG (Brazil). Lab. de Pocos de Caldas

    2011-07-01

    This work presents the preliminary results of the studies aiming to develop a hydrometallurgical process to produce uranium and thorium concentrates from thorianite ore from Amapa State, Brazil. This process comprises two major parts: acid leaching and Th/U recovery using solvent extraction strategies. Thorianite ore has a typical composition of 60 - 70% of thorium, 8 - 10% lead and 7 - 10% uranium. Sulfuric acid leaching operational conditions were defined as follows: acid/ore ratio 7.5 t/t, ore size below 65 mesh (Tyler), 2 hours leaching time and temperature of 100 deg C. Leaching tests results showed that uranium and thorium recovery exceeded 95%, whereas 97% of lead ore content remained in the solid form. Uranium and thorium simultaneous solvent extraction is necessary due to high sulfate concentration in the liquor obtained from leaching, so the Primene JM-T primary anime was used for this extraction step. Aqueous raffinate from extraction containing sulfuric acid was recycled to the leaching step, reducing acid uptake around 60%, to achieve a net sulfuric acid consumption of 3 t/t of ore. Uranium and thorium simultaneous stripping was performed using sodium carbonate solution. In the aqueous stripped it was added sulfuric acid at pH 1.5, followed by a second solvent extraction step using the tertiary amine Alamine 336. The following stripping step was done with a solution of sodium chloride, resulting in a final solution of 23 g L-1 uranium. (author)

  10. Study on the multi-sources of ore-forming materials and ore-forming fluids in the Huize lead-zinc ore deposit

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhenliang; HUANG Zhilong; GUAN Tao; YAN Zaifei; GAO Derong

    2005-01-01

    The Huize large-sized Pb-Zn deposit in Yunnan Province, China, is characterized by favorable metallogenic background and particular geological settings. This suggested that the ore-forming mechanism is relatively unique. On the basis of geological features such as the contents of mineralization elements, the REE concentrations of gangue calcites, the REE concentrations of calcite veins in the NE-trending tectonic zone and the Pb, Sr, C, H and O isotopic compositions of different minerals, this paper presents that the ore-forming materials and ore-forming fluids of the deposit were derived from various types of strata or rocks. This is a very significant conclusion for us to further discuss the mineralization mechanism of the deposit at depth and establish an available genetic model.

  11. KEY ROLE OF METALLOGENIC THEORY OF POLYGENETIC COMPOUND ORE DEPOSITS IN LOCATION PREDICTION OF HIDDEN ORE DEPOSITS IN DIWA REGIONS

    Institute of Scientific and Technical Information of China (English)

    PENG; Sheng-lin; LIU; Liang-ming; LAI; Jian-qing

    2001-01-01

    The metallogenic theory of polygenetic compound ore deposit is the Important basis for location prediction of hidden ore deposits in diwa regions.It can play an important role in each step of prediction research,targeting procedure,acquiring information and integrating information.In this paper,the authors discusses how to construct geological concept by using of the metallogenic theory of polygenetic ore deposits for predicting targeting area,to arrange investigation and detection for getting enough useful information,and to analyze and integrate information for reaching a trustful prediction conclusion.According to these strategies,we conduct a successful prediction of location of hidden ore bodies in the outer of the Fenghuangshan copper mine,a principal producing mine in Tongling Cu-Au district.

  12. Transport network and flow mechanism of shallow ore-bearing magma in Tongling ore cluster area

    Institute of Scientific and Technical Information of China (English)

    DENG; Jun; WANG; Qingfei; HUANG; Dinghua

    2006-01-01

    Abundant studies revealed that shallow intrusions of the Yanshanian epoch resulted in the mass mineralization of the Tongling region. Various evidences showed there existed a concealed magma chamber at -10 km depth in the middle part of this region during Yanshanian epoch, from which the ore-forming magma was generated and then transported to the superficial layer. Yet the transport network and flow mechanism of the shallow ore-bearing magma, the key problem associ- ated with ore-forming process, was relatively little focused on. Integrate analysis of structural me- chanics, statistical fractal and geological facts suggested that NE trending high-angle fold-related thrust faults and the tessellated basement ones served as the main pathways for the shallow magma's transporting, moreover, the saddle void spaces among adjacent strata in the folds upon this fault system provided the place for magma's emplacement. So the folds in the upper part and faults in the lower part of the upper crust constituted the fluid's transport and emplacement network. During the deformation of geologic body with multi-layer structure, the layers in the upper part tended to fold when received the jacking stress from the lower part, while the lower one inclined to fault undergoing loads of the upper part. And the producing probability of this structure assemblage was highly increased in the condition, such as in the Tongling area, that the mechanic rigidity of the lower layers was stronger than that of the upper ones. For the pre-existence of fluid-conducting network, the top magma with high volatile in the magma chamber transported rapidly to the superficial layer in dyking pattern, located in the void spaces of folds, filled and reconstructed them. The sudden drop of pressure caused the fluid unmixing from the magma and mass ore-forming elements concentration. Pulse activity of the dyking may be the principal reason why magmatic bodies in the Tongling area were spatially

  13. Ceramic colorant from untreated iron ore residue.

    Science.gov (United States)

    Pereira, Oscar Costa; Bernardin, Adriano Michael

    2012-09-30

    This work deals with the development of a ceramic colorant for glazes from an untreated iron ore residue. 6 mass% of the residue was added in suspensions (1.80 g/cm(3) density and 30s viscosity) of white, transparent and matte glazes, which were applied as thin layers (0.5mm) on engobeb and not fired ceramic tiles. The tiles were fired in laboratory roller kiln in a cycle of 35 min and maximum temperatures between 1050 and 1180°C. The residue and glazes were characterized by chemical (XRF) and thermal (DTA and optical dilatometry) analyses, and the glazed tiles by colorimetric and XRD analyses. The results showed that the colorant embedded in the transparent glaze results in a reddish glaze (like pine nut) suitable for the ceramic roof tile industry. For the matte and white glazes, the residue has changed the color of the tiles with temperature. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Ferrite grade iron oxides from ore rejects

    Indian Academy of Sciences (India)

    K S Rane; V M S Verenkar; P Y Sawant

    2001-06-01

    Iron oxyhydroxides and hydroxides were synthesized from chemically beneficiated high SiO2/Al2O3 low-grade iron ore (57.49% Fe2O3) rejects and heated to get iron oxides of 96–99.73% purity. The infrared band positions, isothermal weight loss and thermogravimetric and chemical analysis established the chemical formulas of iron-oxyhydroxides as -FeOOH.0.3H2O; -FeOOH.0.2H2O and amorphous FeOOH. The thermal products of all these were -Fe2O3 excepting that of -FeOOH.0.3H2O which gave mainly -Fe2O3 and some admixture of -Fe2O3. The hydrazinated iron hydroxides and oxyhydroxides, on the other hand, decomposed autocatalytically to mainly -Fe2O3. Hydrazine method modifies the thermal decomposition path of the hydroxides. The saturation magnetization, s, values were found to be in the range 60–71 emu g–1 which are close to the reported values for -Fe2O3. Mechanism of the -Fe2O3 formation by hydrazine method is discussed.

  15. Thermodynamics and kinetics of extracting zinc from zinc oxide ore by the ammonium sulfate roasting method

    Science.gov (United States)

    Sun, Yi; Shen, Xiao-yi; Zhai, Yu-chun

    2015-05-01

    Thermodynamic analyses and kinetic studies were performed on zinc oxide ore treatment by (NH4)2SO4 roasting technology. The results show that it is theoretically feasible to realize a roasting reaction between the zinc oxide ore and (NH4)2SO4 in a temperature range of 573-723 K. The effects of reaction temperature and particle size on the extraction rate of zinc were also examined. It is found that a surface chemical reaction is the rate-controlling step in roasting kinetics. The calculated activation energy of this process is about 45.57 kJ/mol, and the kinetic model can be expressed as follows: 1 - (1 - α)1/3 = 30.85 exp(-45.57/ RT)· t. An extraction ratio of zinc as high as 92% could be achieved under the optimum conditions.

  16. Investigation of sulphur isotope variation due to different processes applied during uranium ore concentrate production.

    Science.gov (United States)

    Krajkó, Judit; Varga, Zsolt; Wallenius, Maria; Mayer, Klaus; Konings, Rudy

    The applicability and limitations of sulphur isotope ratio as a nuclear forensic signature have been studied. The typically applied leaching methods in uranium mining processes were simulated for five uranium ore samples and the n((34)S)/n((32)S) ratios were measured. The sulphur isotope ratio variation during uranium ore concentrate (UOC) production was also followed using two real-life sample sets obtained from industrial UOC production facilities. Once the major source of sulphur is revealed, its appropriate application for origin assessment can be established. Our results confirm the previous assumption that process reagents have a significant effect on the n((34)S)/n((32)S) ratio, thus the sulphur isotope ratio is in most cases a process-related signature.

  17. Correlation analysis on partition of rare earth in ion-exchangeable phase from weathered crust ores

    Institute of Scientific and Technical Information of China (English)

    CHI Ru-an; DAI Zu-xu; XU Zhi-gao; WU Yuan-xin; WANG Cun-wen

    2006-01-01

    The rare earth(RE) in weathered crust ores mainly exists as ion-exchangeable phase, approximately 80%. The correlation analysis on partition of 376 samples in ion-exchangeable phase from weathered crust ores was conducted. The results show that partition both among heavy RE elements and light RE elements with high partition appears positive correlation, but partition sums between the heavy RE elements and the light RE elements appear close negative correlation obviously. Clear negative correlations exist between the light RE elements (except Ce) and yttrium(Y). Matrix of correlation analysis on this partition can be divided into three zones. The correlated coefficient variation from negative to positive in zones B and C occurs at Gd, so does that in zones B and A (except Ce, Eu, and Sm), suggesting that RE elements can be divided into two groups with Gd as border. This phenomenon is called Gadolinium-broken effect.

  18. An Application of Microwave Pre-oxidation in Improving Gold Recovery of a Refractory Gold Ore

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Microwave radiation was employed as a pretreating technology to oxidise a refractory gold ore. Heating characteristics showed that, in an identical microwave field, the bulk temperature of the sample increased with microwave power, microwave radiation time and particle size. The rate of sulphur removal increased with microwave radiation time. Particle size also had a significant effect on the oxidation rate. Pyrite and marcasite could be oxidised into Fe2O3 with a high porous structure. When microwave radiation was carried out in a rotary bed, the oxidation was more uniformly developed, in comparison with in a fixed bed. Gold extraction by cyanidation could be remarkably improved after the ore was subjected to microwave radiation. The results showed that gold recovery could be improved from 37% to 69%~81.2%.

  19. Laboratory Study on the Removal of Fluorine from High Fluorine Bearing Zinc Oxide Ore

    Institute of Scientific and Technical Information of China (English)

    Yaozhong LAN; Liaoyuan YE; Rose W. Smith

    2005-01-01

    An ever increasing demand for zinc has resulted in worldwide efforts to exploit complex and lean grade reserves of zinc oxide ore. In this study experiments were done on zinc recovery from high-fluorine bearing zinc oxide ore. First the effect of different variables on fluorine removal was investigated. Optimum experimental conditions occurred when the temperature was 1173 K, roasting time was 90 min and air flow was at a velocity of 5 m/min, the fluorine removal from the samples reached over 93%. The results obtained indicate that fluorine removal is not enhanced by adding diluted sulfuric acid or water as a binder. Second the roasted materials were leached with a diluted sulfuric acid,neutralized, flocculated and filtrated. The residual fluorine content in the leached solutions was less than 38 mg/L,which satisfies the requirement of fluorine content in the leached solutions for the production of electrolytic zinc.

  20. Characteristics and origin of ore-forming fluids of Jinchangqing gold (copper) ore deposit (s) in Xiangyun, Yunnan Province

    Institute of Scientific and Technical Information of China (English)

    HE Mingqin; SONG Huanbin; LIU Jiajun; LI Chaoyang

    2005-01-01

    On the basis of results of the studies of primary fluid inclusions, and the hydrogen and oxygen isotope data, the authors concluded that the early-stage ore-forming fluid from the Jinchangqing gold (copper) ore deposit is a kind of sulfate type hot brine characterized by medium temperature and salinity, genetically related to the late-stage ore-forming fluid derived from an acidic and more reductive environment. However, the late-stage ore-forming fluid is a sort of low temperature and low salinity chloride-type hot brine which originated from a lower pressure, acidic and more oxidative environment. In general, the ore fluids were derived from the late-stage, or largely from the early-stage groundwater-derived meteoric water, which has a 12‰-17‰ heavier oxygen isotopic composition than the original rain water (δ 18 O= -15.3‰ ), and were formed during gold mineralization as a product of oxygen isotope exchange during the reaction between ore-forming fluid and wall rocks under a lower water/rock ratio condition.

  1. Continued Multicolumns Bioleaching for Low Grade Uranium Ore at a Certain Uranium Deposit

    Directory of Open Access Journals (Sweden)

    Gongxin Chen

    2016-01-01

    Full Text Available Bioleaching has lots of advantages compared with traditional heap leaching. In industry, bioleaching of uranium is still facing many problems such as site space, high cost of production, and limited industrial facilities. In this paper, a continued column bioleaching system has been established for leaching a certain uranium ore which contains high fluoride. The analysis of chemical composition of ore shows that the grade of uranium is 0.208%, which is lower than that of other deposits. However, the fluoride content (1.8% of weight is greater than that of other deposits. This can be toxic for bacteria growth in bioleaching progress. In our continued multicolumns bioleaching experiment, the uranium recovery (89.5% of 4th column is greater than those of other columns in 120 days, as well as the acid consumption (33.6 g/kg. These results indicate that continued multicolumns bioleaching technology is suitable for leaching this type of ore. The uranium concentration of PLS can be effectively improved, where uranium recovery can be enhanced by the iron exchange system. Furthermore, this continued multicolumns bioleaching system can effectively utilize the remaining acid of PLS, which can reduce the sulfuric acid consumption. The cost of production of uranium can be reduced and this benefits the environment too.

  2. Upgrading of a Nigerian Ixiolite ore to Columbite by Sulphuric acid treatment

    Directory of Open Access Journals (Sweden)

    Alafara A Baba

    2016-09-01

    Full Text Available A quantitative leaching of a Nigerian Ixiolite ore in sulphuric acid medium was carried out and the effect of some parameters such as acid concentration, temperature and particle size was evaluated as a function of time. The experimental results obtained showed that the Ixiolite dissolution increases with increasing acid concentration, temperature, leaching time and, decreases with particle size. With 3 mol/L H2SO4 solution, 71.14% of the ore reacted within 120 minutes at 80°C.The kinetics of dissolution of the mineral was also examined and the observed effects of the operating variables on the leaching rate were consistent with the diffusion controlled kinetic model. The calculated activation energy for the leaching process was 24.40 kJ/mol with the reaction order of 0.5, supported the proposed model. Detailed characterization of the ore before and after leaching were carried out. At optimal leaching conditions, thermodynamic feasibility of the conversion of raw Ixiolite to Columbite of industrial value, as confirmed by X-ray diffraction (XRD technique is possible.

  3. Fluorosilicone and silicone o-ring aging study.

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Robert; Gillen, Kenneth T.

    2007-10-01

    Fluorosilicone o-ring aging studies were performed. These studies examined the compressive force loss of fluorosilicone o-rings at accelerated (elevated) temperatures and were then used to make predictions about force loss at room temperature. The results were non-Arrhenius with evidence for a lowering in Arrhenius activation energies as the aging temperature was reduced. The compression set of these fluorosilicone o-rings was found to have a reasonably linear correlation with the force loss. The aging predictions based on using the observed curvature of the Arrhenius aging plots were validated by field aged o-rings that yielded degradation values reasonably close to the predictions. Compression set studies of silicone o-rings from a previous study resulted in good correlation to the force loss predictions for the fluorosilicone o-rings from this study. This resulted in a preliminary conclusion that an approximately linear correlation exists between compression set and force decay values for typical fluorosilicone and silicone materials, and that the two materials age at similar rates at low temperatures. Interestingly, because of the observed curvature of the Arrhenius plots available from longer-term, lower temperature accelerated exposures, both materials had faster force decay curves (and correspondingly faster buildup of compression set) at room temperature than anticipated from typical high-temperature exposures. A brief study on heavily filled conducting silicone o-rings resulted in data that deviated from the linear relationship, implying that a degree of caution must be exercised about any general statement relating force decay and compression set.

  4. NUMERICAL EVALUATION OF THE EFFECTS OF SOFT-MELTING PROPERTIES ON THE KINETIC OF (CAFE2 O4 -CA2 FE2 O5 FORMATION IN THE IRON ORE SINTERING PROCESS

    Directory of Open Access Journals (Sweden)

    José Adilson de Castro

    2013-03-01

    Full Text Available This paper presents a mathematical model able to predict the influence of soft-melting properties of the blend of raw materials used in the iron ore sintering process in the kinetic formation of calcium ferrite and di-calcium ferrite constituents. The model is based on the simultaneous solution of transport equations of Momentum, energy and chemical species in multiphase multicomponent systems coupled with the chemical reactions kinetics and phase transformations that occur within the sinter bed. The numerical solution is obtained using the finite volume method and the model is validated using monitoring data from an industrial scale sintering plant. After validation, the model was used to predict processing conditions using raw materials with different soft-melting properties. Results indicate that the temperatures of starting soft-melting, shrinkage and melting range are the main parameters to be controlled in order to attain liquid phases formation responsible to confer good mechanical and reducibility properties for the sinter product. In this study was found that raw materials with high soft-melting temperature and wilder temperature of mushy zone could decrease up to 30% the calcium ferrites formation and hence deteriorates the metallurgical properties of the sinter.

  5. Analysis of Ore-controlling Structure in the Qifengcha-Detiangou Gold Deposit, Huairou County, Beijing

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The Qifengcha-Detiangou gold deposit is a medium-sized deposit recently found in Huairou County, Beijing. It belongs to the altered mylonite type with superimposed quartz vein type and is related to the early Yanshanian magmatic activity. Characterized by multiperiodic activity, the NE-trending Qifengcha fault is a regional ore-controlling structure in the area, and gold mineralization develops only in its southeastern part. Meanwhile, gold mineralization is controlled by the Yunmengshan metamorphic core complex. The nearly N-S- and E-W-trending low-angle detachment faults, reformed by the Qifengcha fault in the northwestern part of the core complex, are the main ore-bearing faults. All discovered gold deposits are located within an area 1.5(4.0 km away from the boundary of the upwelling centre. The N-S- (NNE-) and E-W-trending ore-bearing faults are ductile-brittle structural zones developing in shallow positions and subjected mainly to compressive deformation. The structural ore-controlling effects are as follows. (1) The attitude, shape, and distribution of gold orebodies are controlled by faults. (2) There is a negative correlation between the gold abundance and the magnetic anisotropy (P) of the altered mylonite samples from the deposit, which shows that the gold mineralization is later than the structural deformation. (3) Quartz vein type mineralization is superimposed on altered mylonite type mineralization. (4) In mineralized mylonite, the stronger the ductile shear deformation, the easier the late-stage gold mineralization to occur and the higher the gold abundance. The richest gold mineralization occurs only around the centre of the fault subjected to the strongest deformation.

  6. Application of Odor Sensors to Ore Sorting and Mill Feed Control

    Energy Technology Data Exchange (ETDEWEB)

    Michael G. Nelson

    2005-08-01

    Control of the feed provided to mineral processing facilities is a continuing challenge. Much effort is currently being devoted to overcoming these problems. These projects are usually described under the general headings of Mine-to-Mill Integration or Mine-Mill Optimization. It should be possible to combine the knowledge of ore type, mineralogy, and other characteristics (located in the mine modeling system), with the advanced capabilities of state-of-the-art mill control systems, to achieve an improved level of control in mineral processing that will allow optimization of the mill processes on an almost real-time basis. This is not happening because mill feed it is often treated as a uniform material, when in reality it varies in composition and characteristics. An investigation was conducted to assess the suitability of odor sensors for maintaining traceability in ore production and processing. Commercially available sensors are now used in food processing, environmental monitoring, and other applications and can detect the presence of very small amounts (0.1-500 ppm) of some molecules. An assortment of such molecules could be used to ''tag'' blocks of ore as they are mined, according to their respective characteristics. Then, as the ore came into the mill, an array of ''electronic noses'' could be used to assess its characteristics in real time. It was found that the Cyranose 320{trademark}, a commercially available odor sensor, can easily distinguish among samples of rock marked with almond, cinnamon, citronella, lemon, and orange oils. Further, the sensor could detect mixtures of rocks marked with various combinations of these oils. Treatment of mixtures of galena and silica with odorant compounds showed no detrimental effects on flotation response in laboratory tests. Additional work is recommended to determine how this concept can be extended to the marking of large volumes of materials.

  7. Assessment of natural radioactivity in aquifer medium bearing uranium ores in Koprubasi, Turkey

    Science.gov (United States)

    Simsek, Celalettin

    2008-10-01

    Koprubasi, located within Manisa Province near the Izmir, is the biggest uranium mine where uranium ores originate from Neogene aged altered sandstone and conglomerate layers. The main objective of this study is to determine the radiation hazard associated with radioactivity levels of uranium ores, and the rocks and sediments around Koprubasi. In this regard, measured activity levels of 226Ra, 232Th and 40K were compared with world averages. The average activity levels of 226 Ra, 232Th and 40K were measured to be 5369.75, 124.78 and 10.0 Bq/kg in uranium ores, 24.32, 52.94 and 623.38 Bq/kg in gneiss, 46.24, 45.13 and 762.26 Bq/kg in sandstone and conglomerate, 73.11, 43.15 and 810.65 Bq/kg in sediments, respectively. All samples have high 226Ra and 40K levels according to world average level. As these sediments are used as construction materials and in agricultural activities within the study area, the radiation hazard are calculated by using dose rate (D), annual effective dose rate (He), radium equivalent activity (Raeq) and radiation hazard index (Iyr). All the samples have Raeq levels that are lower than the world average limit of 370 Bq/kg. On the other hand, D, He and Iyr values are higher than world average values. These results indicate that the uranium ores in the Koprubasi is the most important contributor to the natural radiation level. The radioactivity levels of sediments and rocks make them unsuitable for use as agricultural soil and as construction materials. Moreover, it is determined that shallow groundwater in sediments and deep groundwater in conglomerate rocks and also surface water sources in the Koprubasi have high 226Ra content. According to environmental radioactive baseline, some environmental protection study must be taken in Koprubasi uranium site and the environment.

  8. Fragmentation mechanism of low-grade hematite ore in a high pressure grinding roll

    Institute of Scientific and Technical Information of China (English)

    袁致涛; 李丽匣; 韩跃新; 刘磊; 刘廷

    2016-01-01

    The fragmentation mechanism of low-grade hematite ore in a high pressure grinding roll (HPGR) was studied based on the characteristics of comminuted products at different specific pressure levels. The major properties included the reduction ratio, liberation, specific surface energy, and specific surface area. The results showed that the fracture of low-grade hematite ore in HPGR was an interactive dynamic process in which the interaction between coarse particles of gangue minerals and fine particles of valuable minerals was alternately continuous with increased compactness and compacting strength of materials. Within a range of 2.8–4.4 N/mm2, valuable minerals were crushed after preferentially absorbing energy, whereas gangue minerals were not completely crushed and only acted as an energy transfer medium. Within a range of 4.4–5.2 N/mm2, gangue minerals were adequately crushed after absorbing the remaining energy, whereas preferentially crushed valuable minerals acted as an energy transfer medium. Within a range of 5.2–6.0 N/mm2 range, the low-grade hematite ore was not further comminuted because of the “size effect” on the strength of materials, and the comminution effect of materials became stable.

  9. Iron ore industry emissions as a potential ecological risk factor for tropical coastal vegetation.

    Science.gov (United States)

    Kuki, Kacilda N; Oliva, Marco A; Pereira, Eduardo G

    2008-07-01

    In the coastal zone of the Espírito Santo state, Brazil, fragments of restinga, which form a natural ecosystem, share their space with an increasing number of iron ore industries. The iron ore dust and SO(2) originating from the industry processing activities can interfere with the vegetation of the adjacent ecosystems at various levels. This study was undertaken in order to evaluate the effects of industry emissions on representative members of the restinga flora, by measuring physiological and phenological parameters. Foliar samples of Ipomoea pes caprae, Canavalia rosea, Sophora tomentosa, and Schinus terebinthifolius were collected at three increasing distances from an ore industry (1.0, 5.0, and 15.0 km), and were assessed for their dust deposition, chlorophyll, and Fe content. Phenological monitoring was focused on the formation of shoots, flowers, and fruits and was also performed throughout the course of a year. The results showed that the edaphic characteristics and the mineral constitutions of the plants were affected by industry emissions. In addition, the chlorophyll content of the four species increased with proximity to the industry. Phenological data revealed that the reproductive effort, as measured by fruit production, was affected by emissions and S. tomentosa was the most affected species. The use of an integrative approach that combines biochemical and ecological data indicates that the restinga flora is under stress due to industry emissions, which on a long-term basis may put the ecosystem at risk.

  10. Experimental evaluation of sorptive removal of fluoride from drinking water using iron ore

    Science.gov (United States)

    Kebede, Beekam; Beyene, Abebe; Fufa, Fekadu; Megersa, Moa; Behm, Michael

    2016-03-01

    High concentrations of fluoride in drinking water is a public health concern globally and of critical importance in the Rift Valley region. As a low-cost water treatment option, the defluoridation capacity of locally available iron ore was investigated. Residence time, pH, agitation rate, particle size of the adsorbent, sorbent dose, initial fluoride concentration and the effect of co-existing anions were assessed. The sorption kinetics was found to follow pseudo-first-order rate and the experimental equilibrium sorption data fitted reasonably well to the Freundlich model. The sorption capacity of iron ore for fluoride was 1.72 mg/g and the equilibrium was attained after 120 min at the optimum pH of 6. The sorption study was also carried out at natural pH conditions using natural ground water samples and the fluoride level was reduced from 14.22 to 1.17 mg/L (below the WHO maximum permissible limit). Overall, we concluded that iron ore can be used in water treatment for fluoride removal in the Rift Valley region and beyond.

  11. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore.

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-07-04

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C); subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process.

  12. Mechanism of Selective Desulphurization in Iron Ore Sintering Process by Adding Urea

    Science.gov (United States)

    Long, Hongming; Wu, Xuejian; Chun, Tiejun; Li, Jiaxin; Wang, Ping; Meng, Qingmin; Di, Zhanxia; Zhang, Xiangyang

    2017-02-01

    Iron ore sintering is an important part during the ironmaking process, and a large amount of SO2 is also generated. Our previous research shows that it is an effective way to reduce SO2 content of flue gas by adding urea to a special sintering material zone position. In this paper, the mechanism of selective desulphurization by adding urea during the iron ore sintering was carried out. The results show that 88.14 % desulphurization rate was obtained with the addition of 0.05 % urea particles at 100 mm height from the feed bottom. During the sintering process, when drying zone reached the added position of urea, large amounts of NH3 were generated by urea decomposition, and then reacted with SO2 to produce (NH4)2SO4 in the wetting zone. With the accumulated desulphurization reactions during the sintering, the low SO2 emission in the flue gas was achieved. Moreover, the addition of urea in the bottom zone avoided the ammonia present in the sintering ore and promoted the urea utilization efficiency.

  13. Relationship Between Liquid Fluidity of Iron Ore and Generated Liquid Content During Sintering

    Science.gov (United States)

    Peng, Jun; Zhang, Lei; Liu, Li-xia; An, Sheng-li

    2017-02-01

    The fluidity of sintering liquid phase reflects the effective bonding range of the binder phase in the sintering process of iron ores. In this study, the liquid composition and quantity during sintering was calculated using FactSage 7.0 thermodynamic calculation software. The results show that two liquid phases are formed during sintering. One phase is generated at about 1373 K (1100 °C) and the other is generated at about 1523 K (1250 °C). The liquid fluidity index and the low-temperature liquid phase are closely related. The higher-temperature liquid phase has little influence on the liquid fluidity index. The larger the amount of low-temperature liquid phase generated, the higher the liquid fluidity index is. The alkalinity of the low-temperature liquid phase has insignificant influence on the liquid fluidity index. The content of SiO2 in the iron ore is the main factor that affects the liquid fluidity index during sintering. The liquid fluidity index increases greatly with increasing SiO2 content. In contrast, Al2O3 content has little influence on the liquid fluidity index, with an increase in the Al2O3 content only slightly increasing the liquid fluidity index. An increase in the MgO content of the iron ore can reduce liquid generation, promote the spinel generation, and decrease the liquid fluidity index during sintering.

  14. How Many Assay Probes to Find One Ore-bearing Asteroid?

    CERN Document Server

    Elvis, Martin

    2013-01-01

    The number of ore-bearing asteroids could well be small and remote telescopic techniques are inadequate to identify such asteroids confidently. Finding an asteroid that can be profitably mined requires proximate observations from assay probes. Here we use a simple statistical approach to estimate the number of assay probes, Nassay, needed to find at least one ore-bearing asteroid at a high confidence (90%, 95%, 99%). We present results for a wide range of values of the probability of an asteroid being rich in the resource of interest, Prich. We find that Nassay depends strongly on Prich, for likely values of Prich (<0.5). For a plausible value of Prich~0.1 then to obtain 90% confidence that at least one ore-bearing asteroid is found, Nassay = 22, and for 99% confidence Nassay = 44. A factor two increase in Prich roughly halves Nassay, while even for Prich~0.5, Nassay (90%) = 4. Hence any improvement in asteroid characterization prior to sending probes to its proximity would be an effective way to cost-effe...

  15. Iron Ore Industry Emissions as a Potential Ecological Risk Factor for Tropical Coastal Vegetation

    Science.gov (United States)

    Kuki, Kacilda N.; Oliva, Marco A.; Pereira, Eduardo G.

    2008-07-01

    In the coastal zone of the Espírito Santo state, Brazil, fragments of restinga, which form a natural ecosystem, share their space with an increasing number of iron ore industries. The iron ore dust and SO2 originating from the industry processing activities can interfere with the vegetation of the adjacent ecosystems at various levels. This study was undertaken in order to evaluate the effects of industry emissions on representative members of the restinga flora, by measuring physiological and phenological parameters. Foliar samples of Ipomoea pes caprae, Canavalia rosea, Sophora tomentosa, and Schinus terebinthifolius were collected at three increasing distances from an ore industry (1.0, 5.0, and 15.0 km), and were assessed for their dust deposition, chlorophyll, and Fe content. Phenological monitoring was focused on the formation of shoots, flowers, and fruits and was also performed throughout the course of a year. The results showed that the edaphic characteristics and the mineral constitutions of the plants were affected by industry emissions. In addition, the chlorophyll content of the four species increased with proximity to the industry. Phenological data revealed that the reproductive effort, as measured by fruit production, was affected by emissions and S. tomentosa was the most affected species. The use of an integrative approach that combines biochemical and ecological data indicates that the restinga flora is under stress due to industry emissions, which on a long-term basis may put the ecosystem at risk.

  16. Existing State and Partitioning of Rare Earth on Weathered Ores

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The existing state and partitioning of rare earth (RE) on weathered ores in Longnan County (LN), Xingfeng County(XF) and Ninghua County(NH) were characterized systematically by standard geological analytical methods. It is found that RE in the weathered rare earth ores exist as four phases: (a) water soluble, (b) ion-exchangeable, (c) colloidal sediment (oxides), (d) minerals, in which mainly as ion exchangeable phase, accounting for nearly 80% of total RE,with about 20% in the form of colloid sediment phase and mineral phase, but very little as aqueous soluble phase. These rare earth partitioning were mainly chosen mid-heavy RE elements, occupying above 60%, but not equal in the four phases. The mid-heavy RE elements were primarily enriched in the ion exchangeable phase up to 40%, while the containment of cerium dioxide is below 2%. The cerium deficiency occurs in the ion exchangeable phase in weathered ore. It results from that the Ce3+ is oxidized into Ce4+ and changes into CeO2. For LN ore, the containment of Y is high in weathered ore because Y-minerals are abundant in original rock.

  17. Microbial Beneficiation of Salem Iron Ore Using Penicillium purpurogenum

    Science.gov (United States)

    Mishra, M.; Pradhan, M.; Sukla, L. B.; Mishra, B. K.

    2011-02-01

    High alumina and silica content in the iron ore affects coke rate, reducibility, and productivity in a blast furnace. Iron ore is being beneficiated all around the world to meet the quality requirement of iron and steel industries. Choosing a beneficiation treatment depends on the nature of the gangue present and its association with the ore structure. The advanced physicochemical methods used for the beneficiation of iron ore are generally unfriendly to the environment. Biobeneficiation is considered to be ecofriendly, promising, and revolutionary solutions to these problems. A characterization study of Salem iron ore indicates that the major iron-bearing minerals are hematite, magnetite, and goethite. Samples on average contains (pct) Fe2O3-84.40, Fe (total)-59.02, Al2O3-7.18, and SiO2-7.53. Penicillium purpurogenum (MTCC 7356) was used for the experiment . It removed 35.22 pct alumina and 39.41 pct silica in 30 days in a shake flask at 10 pct pulp density, 308 K (35 °C), and 150 rpm. In a bioreactor experiment at 2 kg scale using the same organism, it removed 23.33 pct alumina and 30.54 pct silica in 30 days at 300 rpm agitation and 2 to 3 l/min aeration. Alumina and silica dissolution follow the shrinking core model for both shake flask and bioreactor experiments.

  18. On the use of bastnasite ore as a phosphor material

    Energy Technology Data Exchange (ETDEWEB)

    Mohapatra, M., E-mail: manojm@barc.gov.in; Natarajan, V.; Rajeswari, B.; Dhobale, A.R.; Godbole, S.V.

    2014-01-15

    Bastnasite ore obtained from Indian Rare Earth (IRE) was investigated for its possible use as a phosphor material. The material was characterized by X-ray diffraction (XRD), energy dispersive X-ray fluorescence (EDXRF), photoacoustic spectroscopy (PAS), photoluminescence (PL) and electron paramagnetic resonance spectroscopy (EPR) techniques. XRD studies revealed the semi processed ore to be consisting of single phase CeO{sub 2} with no other impurities. EDXRF studies revealed the presence of ‘Th’ and traces of ‘Sm’ along with ‘Ce’ in the sample. PAS studies revealed the presence of strong charge transfer from oxygen to cerium in the system. PL studies confirmed the presence of at least four trivalent rare earths, viz. Sm, Eu, Dy and Tb in the system in trace quantities. The emission spectrum and decay time data were evaluated. It was observed that the rare earth ions are situated at distorted sites in the system surrounded by defect centers. EPR studies confirmed the presence of Ce{sup 3+}in the system along with electron trapped in oxygen ion vacancies. CIE indices for the ore sample were evaluated and it was seen that the overall emission from the system was in the ‘magenta’ region of the visible spectrum. The emission intensities were also compared with that of commercial samples. -- Highlights: • Characterization of bastnasite ore as a phosphor material. • Role of RE impurities in the luminescence • CIE index of the bastnasite ore.

  19. Flotation technology of refractory low-grade molybdenum ore

    Institute of Scientific and Technical Information of China (English)

    Du Shuhua; Luo Zhenfu

    2013-01-01

    Because of the low grade,high oxidation rate and the accumulation of little associated metal sulfide ore in the molybdenum concentrate during flotation,the Qingyang molybdenum ore is difficult to beneflciate.The experimental studies of grinding fineness,the amount of roughing modifier,depressant and collector were completed.In the cleaning process,the contrast experiments of one regrinding.the regrinding and scrubbing,two-stage regrinding was carried.The result shows that the grade of molybdenum ore concentrate is 45.31%,the recovery is 65.98% and the rich ore ratio reaches 20.59% by the regrinding and scrubbing seven cleaning,the regrinding of concentrations from middling of molybdenum-sulfur separation.The regularly-concentrated material from the apparatus was as the middling products.Hence,ideal beneficiation index can be obtained with a rational mineral processing,which offers new beneficiating technology for the refractory low-grade molybdenum ore in China.

  20. NOVEL BINDERS AND METHODS FOR AGGLOMERATION OF ORE

    Energy Technology Data Exchange (ETDEWEB)

    S.K. Kawatra; T.C. Eisele; J.A. Gurtler; C.A. Hardison; K. Lewandowski

    2004-04-01

    Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily. Primary examples of this are copper heap leaching, where there are no binders that will work in the acidic environment encountered in this process, and advanced ironmaking processes, where binders must function satisfactorily over an extraordinarily large range of temperatures (from room temperature up to over 1200 C). As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching and advanced primary ironmaking.

  1. Hydraulic Conductivity of Compacted Laterite Treated with Iron Ore Tailings

    Directory of Open Access Journals (Sweden)

    Umar Sa’eed Yusuf

    2016-01-01

    Full Text Available The objective of this study was to investigate the effect of iron ore tailings (IOT on hydraulic conductivity of compacted laterite. The IOT conforms to ASTM C 618-15 Type F designations. In the present study, soil was admixed with 0–20% IOT and compacted at moulding water content ranging from 10 to 25% using four types of compactive efforts. Hydraulic conductivities of the compacted soil-IOT mixtures were determined using deionized water and municipal solid waste leachate as the permeant fluids, respectively. Deionized water was the reference permeant fluid. Results of this study showed that hydraulic conductivity decreased with increase in IOT content as a result of improvement in mechanical properties of the soil. Permeation of the soil-IOT mixtures with leachate caused the hydraulic conductivity to drop to less than 1 × 10−9 m/s especially at higher compactive efforts. Also, bioclogging of the soil pores due to accumulation of biomass from bacteria and yeast present in the leachate tends to significantly reduce the hydraulic conductivity. From an economic point of view, it has been found from the results of this study that soil specimens treated with up to 20% IOT and compacted at the British Standard Light (BSL compactive effort met the maximum regulatory hydraulic conductivity of less than or equal to 1 × 10−9 m/s for hydraulic barrier system.

  2. Chemical state mapping of heterogeneous reduction of iron ore sinter

    Science.gov (United States)

    Kimura, M.; Takeichi, Y.; Murao, R.; Obayashi, I.; Hiraoka, Y.; Liu, Y.

    2017-06-01

    Iron ore sinter constitutes the major component of the iron-bearing burden in blast furnaces, and its reduction mechanism is one of the keys to improving the productivity of ironmaking. Iron ore sinter is composed of multiple iron oxide phases and calcium ferrites (CFs), and their heterogeneous reduction was investigated in terms of changes in iron chemical state: FeIII, FeII, and Fe0 were examined macroscopically by 2D X-ray absorption and microscopically by 3D transmission X-ray microscopy (TXM). It was shown that the reduction starts at iron oxide grains rather than at calcium ferrite (CF) grains, especially those located near micropores. The heterogeneous reduction causes crack formation and deteriorates the mechanical strength of the sinter. These results help us to understand the fundamental aspects of heterogeneous reduction schemes in iron ore sinter.

  3. A hybrid decision support system for iron ore supply

    Directory of Open Access Journals (Sweden)

    A. Samolejová

    2012-01-01

    Full Text Available Many European metallurgical companies are forced to import iron ore from remote destinations. For these companies it is necessary to determine the amount of iron ore that will have to be ordered and to create such a delivery schedule so that the continuous operation of blast-furnace plant is not disrupted and there is no exceedingly large stock of this raw material. The objective of this article is to design the decision support system for iron ore supply which would effi ciently reduce uncertainty and risk of that decision-making. The article proposes a hybrid intelligent system which represents a combination of diff erent artifi cial intelligence methods with dynamic simulation technique for that purpose.

  4. Treatment of coking wastewater by using manganese and magnesium ores.

    Science.gov (United States)

    Chen, Tianhu; Huang, Xiaoming; Pan, Min; Jin, Song; Peng, Suchuan; Fallgren, Paul H

    2009-09-15

    This study investigated a wastewater treatment technique based on natural minerals. A two-step process using manganese (Mn) and magnesium (Mg) containing ores were tested to remove typical contaminants from coking wastewater. Under acidic conditions, a reactor packed with Mn ore demonstrated strong oxidizing capability and destroyed volatile phenols, chemical oxygen demand (COD)(,) and sulfide from the coking wastewater. The effluent was further treated by using Mg ore to remove ammonium-nitrogen and phosphate in the form of magnesium ammonium phosphate (struvite) precipitates. When pH of the wastewater was adjusted to 1.2, the removal efficiencies for COD, volatile phenol and sulfide reached 70%, 99% and 100%, respectively. During the second step of precipitation, up to 94% of ammonium was removed from the aqueous phase, and precipitated in the form of struvite with phosphorus. The struvite crystals showed a needle-like structure. X-ray diffraction and transmission electron microscopy were used to characterize the crystallized products.

  5. Beneficiation of the gold bearing ore by gravity and flotation

    Science.gov (United States)

    Gül, Alim; Kangal, Olgaç; Sirkeci, Ayhan A.; Önal, Güven

    2012-02-01

    Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüşhane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

  6. Calcination-Digestion-Desliming of Phosphorus Ore Bearing Rare Earth

    Institute of Scientific and Technical Information of China (English)

    Zhang Qin; Zhang Jie; Wang Jing; Qiu Yue qin

    2004-01-01

    The recoveries of phosphorus and RE of ore from Zhijin in Guizhou were studied.The influences of the calcination temperature, resident time, the digested time and water volume of the calcinating on concentrate yield by desliming were also investigated by orthogonal design.Appropriate calcination temperature is initial condition that makes carbonate mineral decomposition.The recovery of phosphorus is 83.02% and rare earth is 90.56% in phosphorus concentrate when calcined temperature is 900 ℃, other conditions include: calcined time is 30 min, digestion water volume is 300 ml, digestion time is 20 min.The results show that the pre-treatment of the ore is favorable for the separation and enrichment of rare earth from phosphorus ore, and a process of calcination-digestion-desliming was promised.

  7. Fossil bacteria in Xuanlong iron ore deposits of Hebei Province

    Institute of Scientific and Technical Information of China (English)

    DAI Yongding; SONG Haiming; SHEN Jiying

    2004-01-01

    Discovered in Early Proterozoic Xuanlong iron ore deposits are six genera of fossil iron bacteria, i. e. sphere (coenobium of) rod-shaped (monomer) Naumanniella, ellipsoid elliptical Ochrobium, sphere spherical Siderocapsa and chain spherical Siderococcus, chain rod-shaped Leptothrix and Lieskeella, and six genera of fossil blue bacteria, namely sphere spherical Gloeocapsa, Synechocystis and Globobacter, chain spherical Anabaena and Nostoc, and constrictive septate tubular Nodularia. The biomineralized monomers and coenobia of the two categories of bacteria, together with hematite plates made up the bacteria pelletal, bacteria silky,bacteria fibrous and clasty bacteria pelletal textural lamina. The bacteria pelletal laminae combined with other bacteria laminae to make up oncolite, stromatolite and laminate. The precipitation of iron oxide was accelerated due to iron and blue bacteria cohabiting on microbial film or mat. The Xuanlong iron ore deposits are microbial binding ore deposits of ocean source.

  8. Control of Rock Mechanics in Underground Ore Mining

    Science.gov (United States)

    Golik, V. I.; Efremenkov, A. B.

    2017-07-01

    Performance indicators in underground mining of thick iron fields can be insufficient since geo-mechanic specifics of ore-hosting fields might be considered inadequately, as a consequence, critical deformations and even earth’s surface destruction are possible, lowering the indicators of full subsurface use, this way. The reason for it is the available approach to estimating the performance of mining according to ore excavation costs, without assessing losses of valuable components and damage to the environment. The experimental approach to the problem is based on a combination of methods to justify technical capability and performance of mining technology improvement with regard to geomechanical factors. The main idea of decisions to be taken is turning geo-materials into the condition of triaxial compression via developing the support constructions of blocked up structural rock block. The study was carried out according to an integrated approach based on the analysis of concepts, field observations, and simulation with the photo-elastic materials in conditions of North Caucasus deposits. A database containing information on the deposit can be developed with the help of industrial experiments and performance indicators of the field can be also improved using the ability of ore-hosting fields to develop support constructions, keeping the geo-mechanical stability of the system at lower cost, avoiding ore contamination at the processing stage. The proposed model is a specific one because an adjustment coefficient of natural and anthropogenic stresses is used and can be adopted for local conditions. The relation of natural to anthropogenic factors can make more precise the standards of developed, prepared and ready to excavation ore reserves relying on computational methods. It is possible to minimize critical stresses and corresponding deformations due to dividing the ore field into sectors safe from the standpoint of geo-mechanics, and using less cost

  9. [Assessment of Soil Fluorine Pollution in Jinhua Fluorite Ore Areas].

    Science.gov (United States)

    Ye, Qun-feng; Zhou, Xiao-ling

    2015-07-01

    The contents of. soil total fluorine (TF) and water-soluble fluorine (WF) were measured in fluorite ore areas located in Jinhua City. The single factor index, geoaccumulation index and health risk assessment were used to evaluate fluorine pollution in soil in four fluorite ore areas and one non-ore area, respectively. The results showed that the TF contents in soils were 28. 36-56 052. 39 mg.kg-1 with an arithmetic mean value of 8 325.90 mg.kg-1, a geometric mean of 1 555. 94 mg.kg-1, and a median of 812. 98 mg.kg-1. The variation coefficient of TF was 172. 07% . The soil WF contents ranged from 0. 83 to 74. 63 mg.kg-1 with an arithmetic mean value of 16. 94 mg.kg-1, a geometric mean of 10. 59 mg.kg-1, and a median of 10. 17 mg.kg-1. The variation coefficient of WF was 100. 10%. The soil TF and WF contents were far higher than the national average level of the local fluorine epidemic occurrence area. The fluoride pollution in soil was significantly affected by human factors. Soil fluorine pollution in Yangjia, Lengshuikeng and Huajie fluorite ore areas was the most serious, followed by Daren fluorite ore area, and in non-ore area there was almost no fluorine pollution. Oral ingestion of soils was the main exposure route. Sensitivity analysis of model parameters showed that children's weight exerted the largest influence over hazard quotient. Furthermore, a significant positive correlation was found among the three kinds of evaluation methods.

  10. Challenges facing the North American iron ore industry

    Science.gov (United States)

    Jorgenson, J.D.

    2005-01-01

    During the 20th century, the iron ore mining industries of Canada and the United States passed through several periods of transformation. The beginning of the 21st century has seen yet another period of transformation, with the economic failure of a number of steel companies, the acquisition of their facilities by more viable steelmakers, and the consolidation of control within the North American iron ore industry. Changes in Canadian and United States iron ore production and the market control structure involved are analysed. The consolidation of ownership, formation of foreign joint ventures within Nordi America, planned divestitures of upstream activities by steelmakers, and industry changes made to ensure availability of feedstocks will be reviewed. The ttaditional isolation of the Canadian and United States iron ore operations and their strong linkage to downstream steel production will be discussed in the context of a changing global economy. Management-labour conflicts that have taken place and agreements made during 2000 through 2004 will be discussed in the context of the economic environment leading up to these agreements. Cooperative agreements between competing Canadian and United States companies to resolve client needs in processing and blending will be examined. A joint industry-government project designed to use new technology to produce direct reduced iron nuggets of 96 - 98 per cent iron content using non-coking coals will also be assessed. Changes in iron ore transportation methods, ownership and infrastructure will be reviewed for both rail and inland waterway transport between Canadian and United States companies. A brief analysis of social and environmental issues relating to sustainable development of the Canadian-United States iron ore industry will be included.

  11. Ore-forming Conditions and Prospecting in the West Kunlun Area, Xinjiang, China

    Institute of Scientific and Technical Information of China (English)

    DONG Yongguan; GUO Kunyi; XIAO Huiliang; ZHANG Chuanlin; ZHAO Yu

    2004-01-01

    The West Kunlun ore-forming belt is located between the northwestern Qinghai-Tibet Plateau and southwestern Tarim Basin. It situated between the Paleo-Asian Tectonic Domain and Tethyan Tectonic Domain. It is an important component of the giant tectonic belt in central China (the Kunlun-Qilian-Qinling Tectonic Belt or the Central Orogenic Belt). Many known ore-forming belts such as the Kunlun-Qilian Qinling ore-forming zone, Sanjiang (or Threeriver) ore-forming zone, Central Asian ore-forming zone, etc. pass through the West Kunlun area. Three ore-forming zones and seven ore-forming subzones were classified, and eighteen mineralization areas were marked. It is indicated that the West Kunlun area is one of the most favorable region for finding out large and superlarge ore deposits.

  12. Mining remittances corresponding to metalliferous ores: regulation and budget impact

    Directory of Open Access Journals (Sweden)

    N. Asaloș

    2016-04-01

    Full Text Available Economic statistics and forecasting show that Romania has a very favourable potential as far as the metalliferous ores are concerned. As these are owned by the state, once they are allowed to be exploited, they generate considerable amounts for the consolidated public budget. The present paper is meant to conduct a synthetic analysis on the topic of mining remittances from an economic perspective, by considering the juridical framework of capitalizing deposits of ferrous and non-ferrous ores, correlated with the general regulations concerning property and the specific existing regulations of the EU and of the countries that have experience and potential in the mining sector.

  13. Bioleaching of copper oxide ore by Pseudomonas aeruginosa

    Science.gov (United States)

    Shabani, M. A.; Irannajad, M.; Azadmehr, A. R.; Meshkini, M.

    2013-12-01

    Bioleaching is an environmentally friendly method for extraction of metal from ores. In this study, bioleaching of copper oxide ore by Pseudomonas aeruginosa was investigated. Pseudomonas aeruginosa is a heterotrophic bacterium that can produce various organic acids in an appropriate culture medium, and these acids can operate as leaching agents. The parameters, such as particle size, glucose percentage in the culture medium, bioleaching time, and solid/liquid ratio were optimized. Optimum bioleaching conditions were found as follows: particle size of 150-177 μm, glucose percentage of 6%, bioleaching time of 8 d, and solid/liquid ratio of 1:80. Under these conditions, 53% of copper was extracted.

  14. A novel optical granulometry algorithm for ore particles

    Directory of Open Access Journals (Sweden)

    Junhao Y.

    2010-01-01

    Full Text Available This paper proposes a novel algorithm to detect the particle size distribution of ores with irregular shapes and dim edges. This optical granulometry algorithm is particularly suitable for blast furnace process control, so its result can be used directly as a reliable basis for control system dynamics optimization. The paper explains the algorithm and its concept, as well as its method, which consists of five steps to detect ore granularity and distribution. A series of comparative experiments under industrial environments proved that this novel algorithm, compared with conventional ones, improves the accuracy of granulometry.

  15. ECONOMIC EVALUATION OF GOLD-ORE DUMP REPROCESSING EFFICIENCY

    Directory of Open Access Journals (Sweden)

    N. Y. Samsonov

    2010-06-01

    Full Text Available An economic projection is presented in the paper on the heap leaching technology for extracting a residual gold from the gold-ore dumps accumulated at the exploited or closed gold mines. A brief analysis is performed on the legal status of use this source of raw materials, availability and efficiency of the heap leaching method are reviewed, and the potential users of this method are assessed. An investment plan is created for involving anthropogenic dumps of gold-raw materials at one of the ore deposits in Siberia (heap complex of the North-Western flank of the Sovetskoye minefield, Krasnoyarsk region, North-Yenisey area.

  16. Bioleaching of copper oxide ore by P seudomonas aeruginosa

    Institute of Scientific and Technical Information of China (English)

    MA Shabani; M Irannajad; AR Azadmehr; M Meshkini

    2013-01-01

    Bioleaching is an environmentally friendly method for extraction of metal from ores. In this study, bioleaching of copper oxide ore by Pseudomonas aeruginosa was investigated. Pseudomonas aeruginosa is a heterotrophic bacterium that can produce various organic acids in an appropriate culture medium, and these acids can operate as leaching agents. The parameters, such as particle size, glucose percentage in the culture medium, bioleaching time, and solid/liquid ratio were optimized. Optimum bioleaching conditions were found as follows: particle size of 150-177 μm, glucose percentage of 6%, bioleaching time of 8 d, and solid/liquid ratio of 1:80. Under these conditions, 53%of copper was extracted.

  17. SIMS measurements of δ 34S in sulfide minerals from adjacent vein and stratabound ores

    Science.gov (United States)

    Macfarlane, Andrew W.; Shimizu, Nobumichi

    1991-02-01

    The effects of sample matrix and secondary ion energy on the instrumental fractionation of sulfur isotopes have been studied for troilite, pyrite, and galena using the Cameca IMS-3f ion microprobe. An analytical procedure is described for the measurement of δ 34S on negatively charged sulfur ions from pyrite and galena with a reproducibility better than ±1.5%. Sulfur isotope ratios were measured in pyrite and galena from adjacent stratabound manto orebodies and crosscutting veins in the Hualgayoc district of northern Peru. Isotopic compositions (δ 34S CDT) of sulfur in pyrite and galena from vein and manto deposits have a total range from -20 to 10%.. Sulfur in manto galenas has a wide range of isotopic compositions and is usually isotopically heavier than pyrite when both minerals have been analyzed in the same sample. Isotopic disequilibrium between pyrite and galena suggests precipitation from separate fluids, consistent with textural evidence that galena is paragenetically later than pyrite and often replaces it. Formation of ore minerals in the veins appears to have overlapped temporally with the later stages of manto mineralization and continued after manto formation ceased. Sulfur isotope values in pyrite and galena from veins are lower by about 5%. on average than the same sulfides in the mantos, and δ 34S values of vein galenas decrease over the course of vein formation. This shift of δ 34S toward lower values with time may be the result of increased mixing with sulfur from diagenetic sulfides or a decrease in the δ 34S value of aqueous sulfide due to oxidation of the ore fluid in the later stages of deposition. The latter hypothesis is favored because the lead isotopic compositions of the same vein minerals do not indicate an influx of sediment-derived lead and because of the appearance of barite in the final stages of several vein deposits. The majority of pyrite and galena analyses from vein and manto ores are compatible with precipitation from

  18. Influence of gangue existing states in iron ores on the formation and flow of liquid phase during sintering

    Institute of Scientific and Technical Information of China (English)

    Guo-liang Zhang; Sheng-li Wu; Shao-guo Chen; Bo Su; Zhi-gang Que; Chao-gang Hou

    2014-01-01

    Gangue existing states largely affect the high-temperature characteristics of iron ores. Using a micro-sintering method and scan-ning electron microscopy, the effects of gangue content, gangue type, and gangue size on the assimilation characteristics and fluidity of liquid phase of five different iron ores were analyzed in this study. Next, the mechanism based on the reaction between gangues and sintering mate-rials was unraveled. The results show that, as the SiO2 levels increase in the iron ores, the lowest assimilation temperature (LAT) decreases, whereas the index of fluidity of liquid phase (IFL) increases. Below 1.5wt%, Al2O3 benefits the assimilation reaction, but higher concentra-tions proved detrimental. Larger quartz particles increase the SiO2 levels at the local reaction interface between the iron ore and CaO, thereby reducing the LAT. Quartz-gibbsite is more conductive to assimilation than kaolin. Quartz-gibbsite and kaolin gangues encourage the forma-tion of liquid-phase low-Al2O3-SFCA with high IFL and high-Al2O3-SFCA with low IFL, respectively.

  19. Influence of gangue existing states in iron ores on the formation and flow of liquid phase during sintering

    Science.gov (United States)

    Zhang, Guo-liang; Wu, Sheng-li; Chen, Shao-guo; Su, Bo; Que, Zhi-gang; Hou, Chao-gang

    2014-10-01

    Gangue existing states largely affect the high-temperature characteristics of iron ores. Using a micro-sintering method and scanning electron microscopy, the effects of gangue content, gangue type, and gangue size on the assimilation characteristics and fluidity of liquid phase of five different iron ores were analyzed in this study. Next, the mechanism based on the reaction between gangues and sintering materials was unraveled. The results show that, as the SiO2 levels increase in the iron ores, the lowest assimilation temperature (LAT) decreases, whereas the index of fluidity of liquid phase (IFL) increases. Below 1.5wt%, Al2O3 benefits the assimilation reaction, but higher concentrations proved detrimental. Larger quartz particles increase the SiO2 levels at the local reaction interface between the iron ore and CaO, thereby reducing the LAT. Quartz-gibbsite is more conductive to assimilation than kaolin. Quartz-gibbsite and kaolin gangues encourage the formation of liquid-phase low-Al2O3-SFCA with high IFL and high-Al2O3-SFCA with low IFL, respectively.

  20. A statistical approach to the experimental design of the sulfuric acid leaching of gold-copper ore

    Directory of Open Access Journals (Sweden)

    Mendes F.D.

    2003-01-01

    Full Text Available The high grade of copper in the Igarapé Bahia (Brazil gold-copper ore prevents the direct application of the classic cyanidation process. Copper oxides and sulfides react with cyanides in solution, causing a high consumption of leach reagent and thereby raising processing costs and decreasing recovery of gold. Studies have showm that a feasible route for this ore would be a pretreatment for copper minerals removal prior to the cyanidation stage. The goal of this experimental work was to study the experimental conditions required for copper removal from Igarapé Bahia gold-copper ore by sulfuric acid leaching by applying a statistical approach to the experimental design. By using the Plackett Burman method, it was possible to select the variables that had the largest influence on the percentage of copper extracted at the sulfuric acid leaching stage. These were temperature of leach solution, stirring speed, concentration of sulfuric acid in the leach solution and particle size of the ore. The influence of the individual effects of these variables and their interactions on the experimental response were analyzed by applying the replicated full factorial design method. Finally, the selected variables were optimized by the ascending path statistical method, which determined the best experimental conditions for leaching to achieve the highest percentage of copper extracted. Using the optimized conditions, the best leaching results showed a copper extraction of 75.5%.

  1. Leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system

    Institute of Scientific and Technical Information of China (English)

    WANG Rui-xiang; TANG Mo-tang; YANG Sheng-hai; ZHAGN Wen-hai; TANG Chao-bo; HE Jing; YANG Jian-guang

    2008-01-01

    The leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system was studied. The effects of ore particle size,reaction temperature and the sum concentration of ammonium ion and ammonia on the leaching efficiency of zinc were examined.The leaching kinetics of low-grade zinc oxide ore in NH3-NH4Cl-H2O system follows the kinetic law of shrinking-core model. The results show that diffusion through the inert particle pores is the leaching kinetics rate controlling step. The calculated apparent activation energy of the process is about 7.057kJ/mol. The leaching efficiency of zinc is 92.1% under the conditions of ore particle size of 69μm, holding at 80℃ for 60min, sum ammonia concentration of 7.5mol/L, the molar ratio of ammonium to ammonia being 2:1, and the ratio (g/mL) of solid to liquid being 1:10.

  2. Environmental nuclear-geophysical ore monitoring in mines of Corporation Kazakhmys PLC.

    Science.gov (United States)

    Yefimenko, Sergei; Yefimenko, Olga; Makarov, Dmitriy

    2014-01-01

    An environmental monitoring of ore composition in complex deposits of Kazakhstan (the Zhezkazgan, Kusmuryn, Artemjevsk, Kounrad, Taskura and Zhaman-Aibat deposits) is carried out using EDXRF spectrometers RPP-12, RLP-21 and RLP-21T. The monitoring of ore concentrates in Satpaev, Balkhashsk and Zhezkazgan processing plants and in Zhezkazgan copper smelter continues at present time. The monitoring suggests data on new promising elements and environmental pollutants in ores and new trends in distribution of bound elements in ores.

  3. 26 CFR 1.272-1 - Expenditures relating to disposal of coal or domestic iron ore.

    Science.gov (United States)

    2010-04-01

    ... domestic iron ore. 1.272-1 Section 1.272-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE... relating to disposal of coal or domestic iron ore. (a) Introduction. Section 272 provides special treatment... sometimes referred to as a “coal royalty contract” or “iron ore royalty contract”) for the disposal of coal...

  4. 75 FR 68788 - Ore Knob Mine Superfund Site; Jefferson, Ashe County, North Carolina; Notice of Settlement

    Science.gov (United States)

    2010-11-09

    ... Doc No: 2010-28260] ENVIRONMENTAL PROTECTION AGENCY [Docket EPA-RO4-SFUND-2010-0893, FRL-9223-8] Ore... Protection Agency has entered into a settlement for reimbursement of past response costs concerning the Ore..., identified by Docket ID No. EPA-RO4- SFUND-2010-0893 or Site name Ore Knob Mine Superfund Site by one of...

  5. IMPACT: How ORE Findings Have Affected Decisions in Austin and Beyond.

    Science.gov (United States)

    Wilkinson, David, Ed.; Ligon, Glynn, Ed.

    Over the years, findings of the Office of Research and Evaluation (ORE) of the Austin (Texas) Independent School District (AISD) have had a significant impact on decisions made in the district and sometimes beyond it. The ORE's impact in the AISD is reviewed in 16 areas. Some of the major findings are summarized: (1) ORE studies of retention in…

  6. 40 CFR 440.80 - Applicability; description of the vanadium ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... vanadium ore subcategory. 440.80 Section 440.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Vanadium Ore Subcategory (Mined Alone and Not as a Byproduct) § 440.80 Applicability; description of the vanadium...

  7. 28 CFR 79.62 - Criteria for eligibility for claims by ore transporters.

    Science.gov (United States)

    2010-07-01

    ... ore transporters. 79.62 Section 79.62 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CLAIMS UNDER THE RADIATION EXPOSURE COMPENSATION ACT Eligibility Criteria for Claims by Ore Transporters § 79.62 Criteria for eligibility for claims by ore transporters. To establish eligibility for...

  8. 28 CFR 79.63 - Proof of employment as an ore transporter.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Proof of employment as an ore transporter... RADIATION EXPOSURE COMPENSATION ACT Eligibility Criteria for Claims by Ore Transporters § 79.63 Proof of employment as an ore transporter. (a) The Department will accept, as proof of employment for the time...

  9. Rock-magnetism and ore microscopy of the magnetite-apatite ore deposit from Cerro de Mercado, Mexico

    Science.gov (United States)

    Alva-Valdivia, L. M.; Goguitchaichvili, A.; Urrutia-Fucugauchi, J.; Caballero-Miranda, C.; Vivallo, W.

    2001-03-01

    Rock-magnetic and microscopic studies of the iron ores and associated igneous rocks in the Cerro de Mercado, Mexico, were carried out to determine the magnetic mineralogy and origin of natural remanent magnetization (NRM), related to the thermo-chemical processes due to hydrothermalism. Chemical remanent magnetization (CRM) seems to be present in most of investigated ore and wall rock samples, replacing completely or partially an original thermoremanent magnetization (TRM). Magnetite (or Ti-poor titanomagnetite) and hematite are commonly found in the ores. Although hematite may carry a stable CRM, no secondary components are detected above 580°, which probably attests that oxidation occurred soon enough after the extrusion and cooling of the ore-bearing magma. NRM polarities for most of the studied units are reverse. There is some scatter in the cleaned remanence directions of the ores, which may result from physical movement of the ores during faulting or mining, or from perturbation of the ambient field during remanence acquisition by inhomogeneous internal fields within these strongly magnetic ore deposits. The microscopy study under reflected light shows that the magnetic carriers are mainly titanomagnetite, with significant amounts of ilmenite-hematite minerals, and goethite-limonite resulting from alteration processes. Magmatic titanomagnetites, which are found in igneous rocks, show trellis, sandwich, and composite textures, which are compatible with high temperature (deuteric) oxy-exsolution processes. Hydrothermal alteration in ore deposits is mainly indicated by martitization in oxide minerals. Grain sizes range from a few microns to >100 mm, and possible magnetic state from single to multidomain, in agreement with hysteresis measurements. Thermal spectra, continuous susceptibility measurements, and IRM (isothermal remanent magnetization) acquisition suggest a predominance of spinels as magnetic carriers, most probably titanomagnetites with low

  10. Challenges facing the North American iron ore industry

    Science.gov (United States)

    Jorgenson, J.D.

    2006-01-01

    Summary: This report is derived from a presentation the author presented in late September at the Iron Ore 2005 Conference sponsored by The Australasian Institute of Mining and Metallurgy and held in Fremantle, Western Australia. Some slight revisions have been made for the new audience.

  11. Reduction Mechanism of Chromite Ore in Blast Furnace

    Institute of Scientific and Technical Information of China (English)

    LI Yi-wei; DING Wei-zhong; LU Xiong-gang; XU Kuang-di

    2004-01-01

    The structural changes and reduction degree of chromite ore in blast furnace were studied by optical micrograph analysis, scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDXA). The smelting reduction mechanism of chromite in blast furnace was primarily discussed.

  12. Technogenic hydrogeochemical anomalies of tungsten deposits in Kykylbey ore region

    Institute of Scientific and Technical Information of China (English)

    Leonid V.Zamana; Larisa P.Chechel

    2004-01-01

    Peculiarities of the tungsten deposits drainage flow chemical composition formation, the development of which was ceased almost 40 years ago, have been considered. Migration peculiarities of ore components have been covered, and forms of their migration have been calculated. Inertial characteristics of the surface flow contamination are shown.

  13. When People Talk, AISD Listens! ORE Districtwide Surveys, 1983.

    Science.gov (United States)

    Austin Independent School District, TX. Office of Research and Evaluation.

    The Austin Independent School District (AISD) Office of Research and Evaluation (ORE) conducts three surveys to contribute to more informed and better decision-making. The Questions for Teachers and Questions for Administrators surveys are both sent out annually to determine the attitudes of District staff on issues of importance districtwide. The…

  14. ORE's GENeric Evaluation SYStem: GENESYS 1988-89.

    Science.gov (United States)

    Baenen, Nancy; And Others

    GENESYS--GENeric Evaluation SYStem--is a method of streamlining data collection and evaluation through the use of computer technology. GENESYS has allowed the Office of Research and Evaluation (ORE) of the Austin (Texas) Independent School District to evaluate a multitude of contrasting programs with limited resources. By standardizing methods and…

  15. Rock Smelting of Copper Ores with Waste Heat Recovery

    Science.gov (United States)

    Norgate, Terry; Jahanshahi, Sharif; Haque, Nawshad

    It is generally recognised that the grades of metallic ores are falling globally. This trend can be expected to increase the life cycle-based energy requirement for primary metal production due to the additional amount of material that must be handled and treated in the mining and mineral processing stages of the metal production life cycle. Rock (or whole ore) smelting has been suggested as a possible alternative processing route for low grade ores with a potentially lower energy intensity and environmental impact than traditional processing routes. In this processing route, the beneficiation stage is eliminated along with its associated energy consumption and greenhouse gas emissions, but this is partially offset by the need for more solid material to be handled and heated up to smelting temperatures. A life cycle assessment study was carried out to assess the potential energy and greenhouse gas benefits of a conceptual flowsheet of the rock smelting process, using copper ore as an example. Recovery and utilisation of waste heat in the slag (via dry slag granulation) and offgas streams from the smelting step was also included in the study, with the waste heat being utilised either for thermal applications or electricity generation.

  16. Method and set-up for uranium ore sorting

    Energy Technology Data Exchange (ETDEWEB)

    Dragulescu, E.; Ivascu, M.; Popescu, D.; Semenescu, G. (Institutul de Fizica si Inginerie Nucleara, Bucharest (Romania)); Gherea, Gh. (Intreprinderea metalelor rare, Bucuresti (Romania)); Draga, Z.; Funaru, Gh. (Exploatarea miniera Oravita, Oravita (Romania))

    1981-01-01

    A method was studied for uranium ore sorting. After the discussion of the principle, some particular conditions of the sorting are pointed out. A radiometric assembly is described and some results obtained on the simulator and in industrial conditions are reported.

  17. Phases transformation of nickel lateritic ore during dehydration

    Directory of Open Access Journals (Sweden)

    Huang Q.

    2011-01-01

    Full Text Available The high magnesium nickel laterite ore need first be dehydrated if it is treated by the pirometallurgical means. The nickel laterite ore was dehydrated in a laboratory scale sintering pot in this study. The dehydration mechanism was studied by using the thermo-gravimetric (TG tests, differential thermal analysis (DTA, and X-ray diffraction (XRD experiments. The measurements indicated that chlorite (Fe,Mg,Al6(Si,Al4O10(OH8 and serpentine Mg21Si12O28(OH34H2O are the primary phases, while FeO(OH and (Fe,Mg,3Si4O10(OH2 are the minor phases in the ore. The water in the ore can be divided as free water, crystal water, and hydroxyl group. During the heating process, the temperature range for the removal of the free water is 25~140˚C, for the crystal water it is 200~480 ˚C, and for the hydroxyl group it is 500~800˚C. The experiments with various coal dosages show that the temperatures of off-gas and burden increase with an increase in coal dosage. The sinter samples were analyzed using XRD. The results demonstrated that olivine (Mg,Fe2SiO4 and spinel MgFe2O4 are the main bonding phases.

  18. Detection of diamond in ore using pulsed laser Raman spectroscopy

    CSIR Research Space (South Africa)

    Lamprecht, GH

    2007-10-01

    Full Text Available The viability of using pulsed laser excited Raman spectroscopy as a method for diamond detection from ore, has been investigated. In this method the spontaneous Stokes Raman signal is used as indicator of diamond, and a dual channel system...

  19. Natural Ores as Oxygen Carriers in Chemical Looping Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Hanjing; Siriwardane, Ranjani; Simonyi, Thomas; Poston, James

    2013-08-01

    Chemical looping combustion (CLC) is a combustion technology that utilizes oxygen from oxygen carriers (OC), such as metal oxides, instead of air to combust fuels. The use of natural minerals as oxygen carriers has advantages, such as lower cost and availability. Eight materials, based on copper or iron oxides, were selected for screening tests of CLC processes using coal and methane as fuels. Thermogravimetric experiments and bench-scale fixed-bed reactor tests were conducted to investigate the oxygen transfer capacity, reaction kinetics, and stability during cyclic reduction/oxidation reaction. Most natural minerals showed lower combustion capacity than pure CuO/Fe{sub 2}O{sub 3} due to low-concentrations of active oxide species in minerals. In coal CLC, chryscolla (Cu-based), magnetite, and limonite (Fe-based) demonstrated better reaction performances than other materials. The addition of steam improved the coal CLC performance when using natural ores because of the steam gasification of coal and the subsequent reaction of gaseous fuels with active oxide species in the natural ores. In methane CLC, chryscolla, hematite, and limonite demonstrated excellent reactivity and stability in 50-cycle thermogravimetric analysis tests. Fe{sub 2}O{sub 3}-based ores possess greater oxygen utilization but require an activation period before achieving full performance in methane CLC. Particle agglomeration issues associated with the application of natural ores in CLC processes were also studied by scanning electron microscopy (SEM).

  20. CSR behavior and aging model for the Viton© Fluorelastomer O-rings in the 9975 shipping package

    Energy Technology Data Exchange (ETDEWEB)

    Mcwilliams, A. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Skidmore, T. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-12-01

    The 9975 Type B shipping package is used within the DOE complex for shipping special nuclear materials. This package is re-certified annually in accordance with Safety Analysis Report for Packaging (SARP) requirements. The package is also used at the Savannah River Site as part of the long-term storage configuration of special nuclear materials. As such, the packages do not undergo annual recertification during storage, with uncertainty as to how long some of the package components will meet their functional requirements in the storage environment. The packages are currently approved for up to 15 years storage, and work continues to provide a technical basis to extend that period. This report describes efforts by the Savannah River National Laboratory (SRNL) to extend the service life estimate of Viton® GLT and GLT-S fluoroelastomer O-rings used in the 9975 shipping package. O-rings of both GLT and GLT-S compositions are undergoing accelerated aging at elevated temperature, and are periodically tested for compression stress relaxation (CSR) behavior. The CSR behavior of O-rings was evaluated at temperatures from 175 to 400 °F. These collective data were used to develop predictive models for extrapolation of CSR behavior to relevant service temperatures (< 156 °F). The predictive model developed from the CSR data conservatively indicates a service life of approximately 37 years for Viton GLT O-rings at the maximum effective service temperature of 156 °F. The estimated service life for Viton GLT-S O-rings is significantly longer.

  1. Analytical Results for 42 Fluvial Tailings Cores and 7 Stream Sediment Samples from High Ore Creek, Northern Jefferson County, Montana

    Science.gov (United States)

    Fey, David L.; Church, Stan E.

    1998-01-01

    Metal-mining related wastes in the Boulder River basin study area in northern Jefferson County, Montana have been implicated in their detrimental effects on water quality with regard to acid-generation and toxic-metal solubility. Sediments, fluvial tailings and water from High Ore Creek have been identified as significant contributors to water quality degradation of the Boulder River below Basin, Montana. A study of 42 fluvial tailings cores and 7 stream sediments from High Ore Creek was undertaken to determine the concentrations of environmentally sensitive elements (i.e. Ag, As, Cd, Cu, Pb, Zn) present in these materials, and the mineral phases containing those elements. Two sites of fluvial deposition of mine-waste contaminated sediment on upper High Ore Creek were sampled using a one-inch soil probe. Forty-two core samples were taken producing 247 subsamples. The samples were analyzed by ICP-AES (inductively coupled-plasma atomic emission spectroscopy) using a total mixed-acid digestion. Results of the core analyses show that the elements described above are present at very high concentrations (to 22,000 ppm As, to 460 ppm Ag, to 900 ppm Cd, 4,300 ppm Cu, 46,000ppm Pb, and 50,000 ppm Zn). Seven stream-sediment samples were also analyzed by ICP-AES for total element content and for leachable element content. Results show that the sediment of High Ore Creek has elevated levels of ore-related metals throughout its length, down to the confluence with the Boulder River, and that the metals are, to a significant degree, contained in the leachable phase, namely the hydrous amorphous iron- and manganese-hydroxide coatings on detrital sediment particles.

  2. Novel Binders and Methods for Agglomeration of Ore

    Energy Technology Data Exchange (ETDEWEB)

    S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

    2006-09-30

    Heap leaching is one of the methods being used to recover metal from low grade ore deposits. The main problem faced during heap leaching is the migration of fine grained particles through the heap, forming impermeable beds which result in poor solution flow. The poor solution flow leads to less contact between the leach solution and the ore, resulting in low recovery rates. Agglomeration of ore into coarse, porous masses prevents fine particles from migrating and clogging the spaces and channels between the larger ore particles. Currently, there is one facility in the United States which uses agglomeration. This operation agglomerates their ore using leach solution (raffinate), but is still experiencing undesirable metal recovery from the heaps due to agglomerate breakdown. The use of a binder, in addition to the leach solution, during agglomeration would help to produce stronger agglomerates that did not break down during processing. However, there are no known binders that will work satisfactorily in the acidic environment of a heap, at a reasonable cost. As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. Increasing copper recovery in heap leaching by the use of binders and agglomeration would result in a significant decrease in the amount of energy consumed. Assuming that 70% of all the leaching heaps would convert to using agglomeration technology, as much as 1.64*10{sup 12} BTU per year would be able to be saved if a 25% increase in copper recovery was experienced, which is equivalent to saving approximately 18% of the energy currently being used in leaching heaps. For every week a leach cycle was decreased, a savings of as much as 1.23*10{sup 11} BTU per week would result. This project has identified several acid-resistant binders and agglomeration procedures. These binders and experimental procedures will be able to be used for use in improving the energy efficiency of

  3. Dolomite flotation of high magnesium phosphate ores using fatty acid soap collectors

    Science.gov (United States)

    Gu, Zhengxing

    The separation of dolomite from apatite has been recognized as one of the most difficult subjects in mineral processing due to the similarities in their physiochemical properties. In this study, selective surfactants were used with a fatty acid soap collector to improve the flotation performance of separating dolomite from high magnesium phosphate ores. Three surfactants, diethyl phthalate (DP), Tween-80 (TW) and derivative of sulfonate salt (DSS1) were used. Hallimond cell flotation was conducted using pure dolomite sample to determine the effects of various factors including dosages, particle size, Ca2+ ions and slimes on the dolomite flotation recovery. The results showed that the surfactants can significantly improve dolomite flotation performance by increasing collecting ability and tolerating the effect of calcium ions and slime contents. The stirrer-tank cell batch flotation tests were carried out using two natural high magnesium phosphate ore samples containing 3.3% and 1.5% MgO. The test results showed that the surfactant DP could improve dolomite flotation at low dosages, and DSS1 could enhance the separation of dolomite from phosphate by improving both collecting ability and flotation selectivity. When 10% of DSS1 was used with the fatty acid soap as collector, at least 10% more dolomite can be removed with less P2O5 loss. The effectiveness of the surfactant DSS1 in enhancing dolomite flotation was further demonstrated in modified packed column flotation with natural dolomitic phosphate ore sample. The addition of the surfactant DSS1 into fatty acid soap collector could improve its frothability and froth stability, and reduce the bubble size. It has been found that the dolomite flotation performance has a close relationship with the frothability and froth stability of the collector.

  4. Fundamentals of fast reduction of ultrafine iron ore at low temperature

    Institute of Scientific and Technical Information of China (English)

    Pei Zhao; Peimin Guo

    2008-01-01

    Fundamentals on the fast reduction of ultrafine iron ore at low temperature, including characterization of ultrafine ore, de- oxidation thermodynamics of stored-energy ultrafine ore, kinetics of iron ore deoxidation, and deoxidation mechanism, etc., and a new ironmaking process are presented in this article. Ultrafine ore concentrate with a high amount of stored energy can be produced by mechanical milling, and can be dcoxidated fast below 700℃ by either the coal-based or gas-based process. This novel process has some advantages over others: high productivity, low energy consumption, and environmental friendliness.

  5. Explosion-assisted preparation of dispersed gold-bearing different-grade ore for selective mining

    Science.gov (United States)

    Trubachev, AI; Zykov, NV

    2017-02-01

    It is found that there are transient zones (between quality and off-quality ore areas) with the respective content of useful component in an ore body, and a variant of explosive treatment of such zones before the selective mining is put forward. Practicability of two processing technologies is evaluated: processing of high-grade and low-grade ore from the transient zones and heap leaching of metals from the low-grade and impoverished ore. Open mining technology is conventional truck-and-shovel scheme, with distributed ore flows to processing plant and (or) to heap leaching, which generally enhances the mine efficiency.

  6. Influence of Blasted Uranium Ore Heap on Radon Concentration in Confined Workspaces of Shrinkage Mining Stope

    Science.gov (United States)

    Ye, Y. J.; Liang, T.; Ding, D. X.; Lei, B.; Su, H.; Zhang, Y. F.

    2017-07-01

    A calculation model for radon concentration in shrinkage mining stopes under various ventilation conditions was established in this study. The model accounts for the influence of permeability and area of the blasted ore heap, ventilation air quantity, and airflow direction on radon concentration in a confined workspace; these factors work together to allow the engineer to optimize the ventilation design. The feasibility and effectiveness of the model was verified by applying it to mines with elevated radon radiation exposure. The model was found to accurately changes in radon concentration according to the array of influence factors in underground uranium mines.

  7. Removal of Pb ion from water samples using red mud (bauxite ore processing waste)

    OpenAIRE

    Ghorbani A.; Nazarfakhari M.; Pourasad Y.; Mesgari Abbasi S.

    2014-01-01

    This work presented the use of red mud (bauxite ore processing waste) in removal of lead ions in water samples. For this 0.1 g of red mud has been used as adsorbent which suspended in 10 ml of lead solution with the concentration of 50 mg l-1 for about 1 h. After that the lead concentration in the samples taken from the red mud treated lead solution measured with atomic absorption spectroscopy (AAS). The effect of some parameter which is important in adsorption of lead on red mud such as suit...

  8. Minimum critical thickness of dike for ore-bearing fluid injection: A new approach applied to the Shihu gold deposit, Hebei Province, North China

    Directory of Open Access Journals (Sweden)

    Dedong Li

    2012-09-01

    Full Text Available According to the metallogenic theory by transmagmatic fluid (TMF, one magmatic intrusion is a channel of ore-bearing fluids, but not their source. Therefore, it is possible to use TMF’s ability for injection into and for escaping from the magmatic intrusion to evaluate its ore-forming potential. As the ore-bearing fluids cannot effectively inject into the magmatic intrusion when the magma fully crystallized, the cooling time and rates viscosity varied can be used to estimate the minimum critical thickness of the intrusion. One dimensional heat transfer model is used to determine the cooling time for three representative dikes of different composition (granite porphyry, quartz diorite and diabase in the Shihu gold deposit. It also estimated the rates viscosity varied in these time interval. We took the thickness of dike at the intersection of the cooling time – thickness curve and the rates viscosity varied versus thickness curve as the minimum critical thickness. For the ore-bearing fluids effectively injecting into the magma, the minimum critical thicknesses for the three representative dikes are 33.45 m for granite porphyry, 8.22 m for quartz diorite and 1.02 m for diabase, indicating that ore-bearing dikes must be thicker than each value. These results are consistent with the occurrence of ore bodies, and thus they could be applied in practice. Based on the statistical relationship between the length and the width of dikes, these critical thicknesses are used to compute critical areas: 0.0003–0.0016 km2 for diabase, 0.014–0.068 km2 for quartz diorite and 0.011–0.034 km2 for granite porphyry. This implies that ore-bearing minor intrusions have varied areas corresponding to their composition. The numerical simulation has provided the theoretical threshold of exposed thickness and area of the ore-bearing intrusion. These values can be used to determine the ore-forming potentials of dikes.

  9. Coupling of anionic wetting agents to dust of sulfide ores by dropping liquid method

    Institute of Scientific and Technical Information of China (English)

    WU Chao; OU Jia-cai; ZHOU Bo

    2005-01-01

    By using the experimental approach of dropping liquid, the coupling of three anionic wetting agents with ten dust samples of sulfide ores was studied, and particularly the wetting effects of the wetting agents on the sulfide dust influenced by factors of agent concentration and sulfate additive in the wetting agent solutions were investigated. The results show that when the solution temperature is about 20 ℃, all the selected wetting agents are effective to most dust samples, but the effect is different. Wetting agents are more effective to the dust which is difficult to be wetted. Wetting agent solution with sodium sulfate can improve the wetting ability of sulfide dust. For sodium dodecyl benzene sulfonate, the suitable concentration of sodium sulfate is 1-2 mmol/L. The cost of wetting agents can be reduced because the sodium sulfate is much cheaper than many surfactants. Since the dust of sulfide ores is composed of various minerals and elements, the whole effect of depressing dust should be considered while innovating a wetting agent.

  10. Simulation of a high-pressure water jet structure as an innovative tool for pulverizing copper ore in KGHM Polska Miedź S.A.

    Directory of Open Access Journals (Sweden)

    Przemysław Józef Borkowski

    2016-01-01

    Full Text Available Effective comminution of copper ore for further processing during flotation is still a challenge, both as a technological problem as well as for the high energy costs of such processing.A high-pressure water jet is one alternative method of preparing copper ore for final flotation, causing distinct enlargement of the surface of micronized particles, which could be profitable for copper production.As a consequence of such innovative processing, particles of copper ore become micronized, ensuring grain fractions directly useful for flotation at the exit of the pulverizing apparatus (the hydro-jetting mill.The paper presents some results of simulation as well as describing an analysis of the phenomena occurring inside the high-pressure water and abrasive-water jets of specific structures, elaborated in the aspect of developing hybrid jets of maximum erosive efficiency, potentially useful for effective pulverization.

  11. China's emergence as the world's leading iron-ore-consuming country

    Science.gov (United States)

    Kirk, W.S.

    2004-01-01

    China has become the leading iron ore consuming nation, and, based on recent steel production capacity increases and plans for more, its consumption will almost certainly to continue to grow. China's iron ore industry, however, faces a number of problems. China's iron ore is low-grade, expensive to process, and its mines are being depleted. For many Chinese steelmakers, particularly in the coastal regions, the delivered cost of domestic iron ore, is more than the delivered cost of foreign ore. Thus China's iron ore imports are expected to increase. As China's growth continues, it will almost certainly surpass Japan to become the leading iron ore importing country as well. Without China's increasing appetite for iron ore, the world iron ore market would be flat or declining. China's recent imports largely offset the slump in demand in North America and Europe. China is regarded by the iron ore industry as the growth sector for the next decade. Although Chinese imports are expected to continue their rapid increase and imports in other Asian countries are expected to continue growing, there appears to be enough greenfield and expansion projects to meet future demand for iron ore worldwide. Present suppliers of iron ore, Australia, Brazil, India, and South Africa, will probably be the chief beneficiaries of China's increasing consumption of iron ore. How long China can continue its extraordinary growth is the primary issue for the future of the iron ore industry. Based on the number and size of planned blast furnaces it appears that China's growth could continue for several more years. ?? 2004 Taylor and Francis.

  12. Tectonophysics of hydrothermal ore formation: an example of the Antei Mo-U deposit, Transbaikalia

    Science.gov (United States)

    Petrov, V. A.; Rebetsky, Yu. L.; Poluektov, V. V.; Burmistrov, A. A.

    2015-07-01

    The Antei deposit of the southeastern Transbaikalian region is one of the largest uranium mines in Russia. It is hosted by the Late Paleozoic granitic basement of the Streltsovskaya caldera and was formed as a result of Late Mesozoic tectonothermal activity. Vein and stockwork-disseminated molybdenum-uranium mineralization at this deposit is controlled by zones of intense hydrothermal alteration, cataclasis, brecciation, and intense fracturing along steeply dipping faults, which acted as conduits for mineralizing fluids and hosts to the ore bodies. The upper edge of the ore-bearing zone is located at a depth of 400 m, and its lower edge was intersected at a depth of 1300 m from the day surface. The conditions of ore localization were determined using structural-geological and petrophysical studies coupled with numerical modeling of the effects of gravitational body forces at purely elastic and postcritical elastoplastic deformational stages. The dynamics of the tectonic stress field in the rock massif was reconstructed using the results of mapping of morphogenetic and kinematic characteristics of fault and fracture systems, as well as data on petrography and mineralogy of rocks and vein-filling material. It was shown that the fault framework of the deposit was formed in four tectonic stages, three of which took place in the geologic past and one of which reflects recent geologic history. Each tectonic stage was characterized by different parameters of the tectonic stress-strain field, fault kinematics, and conditions of mineral formation. The following types of metasomatic rocks are recognized within the deposit: high-temperature K-feldspar rocks and albitites (formed during the Late Paleozoic as the primary structural elements of a granitic massif) and Late Mesozoic low-temperature preore (hydromicatized rocks), synore (hematite, albite, chlorite, and quartz) and postore (kaolinite-smectite) rocks. The following petrophysical parameters were determined for all

  13. Reduction of lateritic iron ore briquette using coal bed reductant by isothermal - temperature gradient method

    Science.gov (United States)

    Zulhan, Zulfiadi; Himawan, David Mangatur; Dimyati, Arbi

    2017-01-01

    In this study, isothermal-temperature gradient method was used to separate iron and alumina in lateritic iron ore as an alternative technique. The lateritic iron ore was ground to obtain grain size of less than 200 mesh and agglomerated in the form of cylindrical briquette using a press machine. The iron oxide in the briquette was reduced by addition of coal so that all surface of the briquette was covered by the coal. The temperature profile for the reduction process of the briquette was divided into three stages: the first stage was isothermal at 1000°C, the second stage was temperature gradient at varies heating rate of 5, 6.67 and 8.33°C/minutes from 1000 to 1400°C, and the final stage was isothermal at 1400°C. The effect of dehydroxylation of lateritic iron ore was studied as well. Aluminum distribution inside and outside the briquette was analyzed by scanning electron microscope with energy dispersive spectroscopy (SEM-EDS). The analysis results showed that the aluminum content increased from 8.01% at the outside of the briquette to 13.12% in the inside of the briquette. On contrary, iron content is higher at the outside of the briquette compared to that in the inside. These phenomena indicated that aluminum tends to migrate into the center of the briquette while iron moves outward to the surface of briquette. Furthermore, iron metallization of 91.03% could be achieved in the case of without dehydroxylation treatment. With the dehydroxylation treatment, iron metallization degree was increased up to 95.27%.

  14. Sulphidization flotation for recovery of lead and zinc from oxide-sulfide ores

    Institute of Scientific and Technical Information of China (English)

    FA Keqing; Jan D.Miller; JIANG Tao; LI Guang-hui

    2005-01-01

    A new flowsheet was developed to recover the valuable minerals from oxide or oxide-sulfide ores of lead and zinc. The flowsheet consisted of flotation of sulfide minerals, desliming and sulphidization-flotation of oxide minerals. The corresponding reagent system and techniques to the flowsheet were investigated. Batch and continuous tests show that the dosage of sodium sulfide, temperature, and collector type are main affecting factors on the recovery of smithsonite and cerussite. For the flotation of cerussite, there is an appropriate dosage of sodium sulfide at which the recovery reaches its maximum value. The required sodium sulfide for smithsonite flotation is higher than that for cerussite and the recovery of smithsonite flotation increases with the dosage of sodium sulfide at low level and becomes insensitive at high dosage. The appropriate temperature for smithsonite and cerussite flotation is found to be 25 - 40 ℃. Amines are found to be the effective collectors for the flotation of smithsonite after sulphidization. Investigation also shows that desliming prior to sulphidization-flotation is essential to the effective recovery of smithsonite and cerussite, and the desliming process of two-stage hydrocyclon is well feasible and effective for the treatment of lead-zinc oxide ores. A further treatment on the cerussite flotation concentrate by shaking table is proposed to obtain higher lead grade.

  15. The genesis of the base metal ore deposit from Herja

    Directory of Open Access Journals (Sweden)

    Gheorghe Damian

    2003-04-01

    Full Text Available The Herja ore deposit is one of the most known of the Baia Mare Neogene metallogenetic district and is associated with a complex stock of Pannonian age. The hydrothermal alterations associated with the mineralizations are represented by: the propylitization, the argillization, the phyllic and potassic alteration. The monoascenedant character of the mineralizations is predominant. The magmatic intrusions have been sequential placed and have represented the heat, metals and hydrothermal solutions source. In the first stages of mineralization the hydrothermal solutions contain predominantly magmatic water and in the final stages the water is of connate and meteoric origin. According to the structural magmatic control, to the mineralogical composition and to the hydrothermal alterations, the Herja ore deposits are of a low sulphidation epithermal systems type.

  16. Estimation of Springing Response for 550 000 DWT Ore Carrier

    Institute of Scientific and Technical Information of China (English)

    Christiaan Adika Adenya; Huilong Ren; Hui Li; Di Wang

    2016-01-01

    The desire to benefit from economy of scale is one of the major driving forces behind the continuous growth in ship sizes. However, models of new large ships need to be thoroughly investigated to determine the carrier’s response in waves. In this work, experimental and numerical assessments of the motion and load response of a 550,000 DWT ore carrier are performed using prototype ships with softer stiffness, and towing tank tests are conducted using a segmented model with two schemes of softer stiffness. Numerical analyses are performed employing both rigid body and linear hydroelasticity theories using an in-house program and a comparison is then made between experimental and numerical results to establish the influence of stiffness on the ore carrier’s springing response. Results show that softer stiffness models can be used when studying the springing response of ships in waves.

  17. Creep in model pillars. [Salt, trona, and potash ore

    Energy Technology Data Exchange (ETDEWEB)

    Obert, L.

    1965-03-01

    A study was made of the deformational behavior (creep) of pillars made from three quasi-plastic rock--salt, trona, and potash ore. The first phase of this study considers the design of a model pillar suitable for creep tests; in the second phase, six model pillars were prepared from salt from two sources, from trona, and from potash ore. The pillars in each group were subjected to a different but constant axial stress, and the axial strain was measured for 1,000 hours. An analysis of the data shows that in general the creep rate for these model pillars can be expressed by the relationship .epsilon = K/sub 1/ sigma/sub 0//sup n/, where .epsilon is the strain rate, sigma/sub 0/ is the applied stress, and K/sub 1/ and n are constants. For the rocks included in this test, n ranged from 2.4 to 3.3.

  18. Genesis of ion-adsorption type REE ores in Thailand

    Science.gov (United States)

    Sanematsu, K.; Yoshiaki, K.; Watanabe, Y.

    2012-04-01

    Ion-adsorption type REE deposits, which have been economically mined only in southern China, are predominant supply sources for HREE in the world. The ore bodies consist of weathered granites called ion-adsorption ores. The majority of REE (>50 %) are electrostatically adsorbed onto weathering products in the ores and they can be extracted by ion exchange using an electrolyte solution (e.g., ammonium sulfate solution). Recently the occurrences of ion-adsorption ores have been reported in Indochina, SE Asia. In this study, we discuss geochemical and mineralogical characteristics of parent granites and weathered granites in Thailand in order to reveal the genesis of ion-adsorption ores. Permo-Triassic and Cretaceous-Paleogene granite plutons are distributed from northern Thailand to western Indonesia through eastern Myanmar and Peninsular Malaysia. They are mostly ilmenite-series calcalkaline biotite or hornblende-biotite granites. REE contents of the granites range from 60 to 600 ppm and they are relatively high in Peninsula Thailand. REE-bearing minerals consist mainly of apatite, zircon, allanite, titanite, monazite and xenotime. Some I-type granites contain REE fluorocarbonate (probably synchysite-(Ce)) in cavities and cracks in feldspars and it is the dominant source of REE for ion-adsorption ores because the fluorocarbonate is easily soluble during weathering. In contrast, insoluble monazite and xenotime are not preferable for ion-adsorption ores although they are common ore minerals of placer REE deposits. Weathered granites show REE contents ranging from 60 to 1100 ppm in Thailand because REE are relatively immobile compared with mobile elements (e.g., Na, K, Ca). In the weathered granites, REE are contained in residual minerals and secondary minerals and are adsorbed onto the surface of weathering products. A weathering profile of granite with ion-adsorption type mineralization can be divided into upper and lower parts based on REE enrichment and Ce

  19. Speciation and recovery of chromium from chromite ore processing residues.

    Science.gov (United States)

    Sreeram, K J; Ramasami, T

    2001-10-01

    The processing of chromite ore is associated with the generation of large quantities of solid wastes containing chromium, which have been disposed of as landfill for many years. The mobilization and operational speciation of chromium contained in soils contaminated with metal salts are important in terms of the environment. Several methods have been employed for the extraction and recovery of solid wastes. Chromium contained in contaminated soils and solid wastes can be categorized as exchangeable, oxidizable, carbonate-bound, reducible and residual. The results from this study indicate a need for efficient leaching methodologies in chromite ore processing plants to decrease the non-detrital fractions of chromium in the residue. Aggressive methodologies are required to recover chromium from the detrital fractions. The potential benefits of employing sodium peroxide for the complete recovery of chromium from chromite residue have been demonstrated, and the need to ensure the safety of the process has been emphasized.

  20. Phase transformations of siderite ore by the thermomagnetic analysis data

    Science.gov (United States)

    Ponomar, V. P.; Dudchenko, N. O.; Brik, A. B.

    2017-02-01

    Thermal decomposition of Bakal siderite ore (that consists of magnesium siderite and ankerite traces) was investigated by thermomagnetic analysis. Thermomagnetic analysis was carried-out using laboratory-built facility that allows automatic registration of sample magnetization with the temperature (heating/cooling rate was 65°/min, maximum temperature 650 °C) at low- and high-oxygen content. Curie temperature gradually decreases with each next cycles of heating/cooling at low-oxygen content. Curie temperature decrease after 2nd cycle of heating/cooling at high-oxygen content and do not change with next cycles. Final Curie temperature for both modes was 320 °C. Saturation magnetization of obtained samples increases up to 20 Am2/kg. The final product of phase transformation at both modes was magnesioferrite. It was shown that intermediate phase of thermal decomposition of Bakal siderite ore was magnesiowustite.

  1. Method of winning aluminum metal from aluminous ore

    Science.gov (United States)

    Loutfy, Raouf O.; Keller, Rudolf; Yao, Neng-Ping

    1981-01-01

    Aluminous ore such as bauxite containing alumina is blended with coke or other suitable form of carbon and reacted with sulfur gas at an elevated temperature. For handling, the ore and coke can be extruded into conveniently sized pellets. The reaction with sulfur gas produces molten aluminum sulfide which is separated from residual solid reactants and impurities. The aluminum sulfide is further increased in temperature to cause its decomposition or sublimation, yielding aluminum subsulfide liquid (AlS) and sulfur gas that is recycled. The aluminum monosulfide is then cooled to below its disproportionation temperature to again form molten aluminum sulfide and aluminum metal. A liquid-liquid or liquid-solid separation, depending on the separation temperature, provides product aluminum and aluminum sulfide for recycle to the disproportionation step.

  2. Direct reduction of iron ore by biomass char

    Science.gov (United States)

    Zuo, Hai-bin; Hu, Zheng-wen; Zhang, Jian-liang; Li, Jing; Liu, Zheng-jian

    2013-06-01

    By using thermogravimetric analysis the process and mechanism of iron ore reduced by biomass char were investigated and compared with those reduced by coal and coke. It is found that biomass char has a higher reactivity. The increase of carbon-to-oxygen mole ratio (C/O) can lead to the enhancement of reaction rate and reduction fraction, but cannot change the temperature and trend of each reaction. The reaction temperature of hematite reduced by biomass char is at least 100 K lower than that reduced by coal and coke, the maximum reaction rate is 1.57 times as high as that of coal, and the final reaction fraction is much higher. Model calculation indicates that the use of burden composed of biomass char and iron ore for blast furnaces can probably decrease the temperature of the thermal reserve zone and reduce the CO equilibrium concentration.

  3. Estimation of springing response for 550 000 DWT ore carrier

    Science.gov (United States)

    Adenya, Christiaan Adika; Ren, Huilong; Li, Hui; Wang, Di

    2016-09-01

    The desire to benefit from economy of scale is one of the major driving forces behind the continuous growth in ship sizes. However, models of new large ships need to be thoroughly investigated to determine the carrier's response in waves. In this work, experimental and numerical assessments of the motion and load response of a 550,000 DWT ore carrier are performed using prototype ships with softer stiffness, and towing tank tests are conducted using a segmented model with two schemes of softer stiffness. Numerical analyses are performed employing both rigid body and linear hydroelasticity theories using an in-house program and a comparison is then made between experimental and numerical results to establish the influence of stiffness on the ore carrier's springing response. Results show that softer stiffness models can be used when studying the springing response of ships in waves.

  4. Bacterial leaching of discarded copper ores from Yongping, China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The elementary and phase analysis of discarded copper ores from Yongping of China has been performed. The experiments of extracting copper from the discarded copper ores were done with the mixed bacteria obtained through a series of enrichment,separation, domestication and combination tests. The results show that in the process of bioleaching, the pH value rises at first and drops gradually. The Eh value keeps rising along with the time and the appropriate Eh value varying between 750 and 800 mV will benefit the bioleaching copper. The high concentration of ferric ions is detrimental to the bioleaching copper. The results of bioleaching copper are good. That is, the copper recovery is 31.8% after 27 days.

  5. Natural radionuclide concentrations in two phosphate ores of east Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Lakehal, Ch. [Department of Physics, Mentouri Constantine University, 25000 Constantine (Algeria); Ramdhane, M., E-mail: ramdhane@hotmail.co [Department of Physics, Mentouri Constantine University, 25000 Constantine (Algeria); Boucenna, A. [Department of Physics, Ferhat-Abbas University, 19000 Setif (Algeria)

    2010-05-15

    Ore is considered as an important source of many elements such as the iron, phosphorus, and uranium. Concerning the natural radionuclides, their concentrations vary from an ore to other depending on the chemical composition of each site. In this work, two phosphate ores found in East of Algeria have been chosen to assess the activity concentration of natural radionuclides represented mainly by three natural radioactive series {sup 238}U, {sup 235}U and {sup 232}Th, and the primordial radionuclide {sup 40}K where they were determined using ultra-low background, high-resolution gamma-ray spectroscopy. The measured activity concentrations of radioactive series ranged from 6.2 +- 0.4 to 733 +- 33 Bq.kg{sup -1} for the {sup 232}Th series, from 249 +- 16 to 547 +- 39 Bq.kg{sup -1} for the {sup 238}U series, around 24.2 +- 2.5 Bq.kg{sup -1} for the {sup 235}U series, and from 1.4 +- 0.2 to 6.7 +- 0.7 Bq.kg{sup -1} for {sup 40}K. To assess exposure to gamma radiation in the two ores, from specific activities of {sup 232}Th, {sup 40}K and {sup 226}Ra, three indexes were determined: Radium equivalent (Ra{sub eq}), external and internal hazard indexes (H{sub ex} and H{sub in}), their values ranged from 831 +- 8 to 1298 +- 14 Bq.kg{sup -1} for Ra{sub eq}, from 2.2 +- 0.4 to 3.5 +- 0.7 Bq.kg{sup -1} for H{sub ex}, and from 4.2 +- 0.7 to 4.5 +- 0.7 Bq.kg{sup -1} for H{sub in}.

  6. The extractive metallurgy of south africa's platinum ores

    Science.gov (United States)

    Cramer, Larry A.

    2001-10-01

    The extraction technology for platinum-group metals (PGMs) has changed dramatically in the last 80 years, and the changes are likely to continue for years to come. This article will review advances in PGM extraction, including developments in semi-autogenous and fully autogenous milling; flotation equipment applications for treating high-chrome ores; increases in power densities for future smelting furnaces, and new methods for meeting rising environmental standards.

  7. Uranium recovery from Uro area phosphate ore, Nuba Mountains, Sudan

    Directory of Open Access Journals (Sweden)

    Abdelmajid A. Adam

    2014-11-01

    Full Text Available This study was carried out in a laboratory scale to recover uranium from Uro area phosphate ore in the eastern part of Nuba Mountains in Sudan. Phosphate ore samples were collected, and analyzed for uranium abundance. The results showed that the samples contain a significant concentration of uranium with an average of 310.3 μg/g, which is 2.6 times higher than the world average of phosphate. The green phosphoric acid obtained from the samples was found to contain uranium in the range of 186–2049 μg/g, with an average of 603.3 μg/g, and about 98% of uranium content of the phosphate ore was rendered soluble in the phosphoric acid. An extraction process using 25% tributylphosphate, followed by stripping process using 0.5 M sodium carbonate reported that more than 98% of uranium in the green phosphoric acid exists as uranyl tricarbonate complex, moreover, sodic decomposition using 50% sodium hydroxide showed that about 98% of the uranium was precipitated as sodium diuranate concentrate that is known as the yellow cake (Na2U2O7. Further purification and calcinations of the yellow cake led to the formation of the orange powder of uranium trioxide (UO3. The chemical analysis of the obtained uranium concentrates; yellow cake and uranium trioxide proved their nuclear purity and that they meet the standard commercial specification. The obtained results proved that uranium from Uro phosphate ore was successfully recovered as uranium trioxide with an overall recovery percentage of 93%.

  8. PROCESS FOR THE RECOVERY OF URANIUM FROM PHOSPHATIC ORE

    Science.gov (United States)

    Long, R.L.

    1959-04-14

    A proccss is described for the recovery of uranium from phosphatic products derived from phosphatic ores. It has been discovered that certain alkyl phosphatic, derivatives can be employed in a direct solvent extraction operation to recover uranium from solid products, such as superphosphates, without first dissolving such solids. The organic extractants found suitable include alkyl derivatives of phosphoric, pyrophosphoric, phosof the derivative contains from 4 to 7 carbon atoms. A diluent such as kerosene is also used.

  9. Bioprocessing low grade copper ores - a promising alternative

    OpenAIRE

    Guezennec, Anne-Gwenaëlle; d'Hugues, Patrick

    2015-01-01

    International audience; This paper presents an overview of the work performed by the BRGM team in the last 10 years on the development of bio-hydrometallurgy dedicated to the processing of low-grade copper ores from the Kupferschiefer deposits. It covers selection and adaptation of microbial consortia, optimization of process operating parameters such as solid contents, the relationship between bioleaching performance and mineralogy, testing operating parameters to overcome chalcopyrite recal...

  10. Geostatistical Approach to Estimating the Gold Ore Characteristics and Gold Reserves: A Case Study Daksa Area, Quang Nam Province, Viet Nam

    Science.gov (United States)

    Luan Truong, Xuan; Luong Le, Van; Quang Truong, Xuan

    2015-04-01

    Daksa gold deposit is the biggest gold deposits in Vietnam. The Daksa geological structure complicated, distributed mainly metamorphosed sedimentary NuiVu formation (PR3-?1nv2). The sulfide gold ore bodies distributed in quartz schist, quartz - biotite related to faut and distribution wing anticline. The gold ore bodies form circuits, network circuits, circuits lenses; fill the cup surface layer of the developing northeast - southwest; is the less than or west longitude north - SE. The results show that, Au and accompanying elements (Ag, Pb and Zn) have correlated pretty closely. All of its consistent with the logarithmic distribution standard, in accordance with the law of distribution of content mineral rare. The structure functions have nugget effect and spherical models with show that Au and accompanying elements special variation are changes. Au contents shown local anisotropy, no clearly anisotropy (K=1,17) and weakly anisotropy (K=1,4). Intensity mineralization of the ore bodies are quite high with demand spherical conversion coefficient ranging from 0.49 to 0.75 and from 0.66 to 0.97 (for other body). With nugget effects, ore bodies shown that it is consistent with mineralization in the ore bodies study, ore erasable, micro vein, infilling fractures in quartz vein. All of variogram presents local anisotropy, indicated gold mineralization at study area has least two-mineralization stages, consistent with the analysis of mineralography samples. By the results of the structure function study, the authors present the system optimization for exploration deposit and used to evaluate gold reserves by Ordinary Kriging. High accuracy of Kriging estimation results are expressed in the minimum Kriging variance, by compare the results calculated by some other methods (such as distance inverse weighting method, ..) and specially compare to the results of a some blocks have been exploited. Key words: Geostat and gold deposits VN. Daksa and gold mineralization. Geostat

  11. Atmospheric emission of polychlorinated naphthalenes from iron ore sintering processes.

    Science.gov (United States)

    Liu, Guorui; Zheng, Minghui; Du, Bing; Nie, Zhiqiang; Zhang, Bing; Liu, Wenbin; Li, Cheng; Hu, Jicheng

    2012-10-01

    Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the present study was to qualify and quantify PCN emissions from nine sintering plants operating on different industrial scales. PCN concentrations ranged from 3 to 983 ng m(-3) (0.4-23.3 pg TEQ(PCN) m(-3)) and emission factors ranged from 14 to 1749 μg t(-1) (0.5-41.5 ng TEQ(PCN) t(-1)), with a geometric mean of 84 μg t(-1) (2.1 ng TEQ(PCN) t(-1)). The estimated annual emission of PCNs from sintering processes in China was 1390 mg TEQ(PCN). These figures will assist in the development of a PCN emissions inventory. Regarding emission characteristics, PCNs mainly comprised low-chlorinated homologs. The ratios of several characteristic PCN congeners were also measured and compared with those from other sources. Taken together, these results may provide useful information for identifying the sources of PCNs produced by iron ore sintering processes. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. On the problems of the Litija ore field

    Directory of Open Access Journals (Sweden)

    Ivan Mlakar

    1994-12-01

    Full Text Available All available information on the now inaccessible Pb-Zb-Ba deposits Litija, Zavrstnik, Zagorica, Maljek, Hrastarija and Štriglovec was critically evaluated. Data were completed and numerous earlier unsolved questions were answered.In the studied area the existence of a Middle Triassic tectonic-erosional phase was proved, the Old Tertiary overthrust structure analyzed and the relative ages of various neotectonic fault systems established.Special attention was attributed to the Litija, or Sitarjevec, deposit. On the ground of data on position of thick shale intercalations within Carboniferous sandstone the geological structure of the deposit was reconstructed, proofs on the conforming or unconforming position of orebodies collected, and certain relati¬onships between the pre-ore and post-ore tectonics clarified. With geochemical investigations the presence of an extensive dispersion halo was proved, in which the anomalies produced by Pb, Hg and Ba are the best expressed.Also the position of other deposits in space and in stratigraphic column was defined. At the end also the author's views on genesis and age of mineralization are presented. Orebodies are hydrothermal. subvertical, epignetic and predominantly discordant, with poorly expressed vertical zoning.The work is a synthesis of understanding of geological structure and mineralization in the Litija ore field.

  13. Contact mechanical analysis of O-ring stresses

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu

    2007-02-15

    The purpose of this project is to develop the approximate solutions of contact traction and internal stress of an O-ring by using a two dimensional elasticity for enhancing the design and failure prediction technology. Investigated were the applicability of Lindley's formulae of contact force prediction and the Hertz theory. Three cases of O-ring installation were considered. The approximate solution of contact tractions and internal stresses of each case were derived. The key results are summarized as follows: 1. It is verified that Lindley's formulae predicts the relationship between the fractional compression and contact force. 2. In the case of Case I, II and III without internal pressure, it is found that a function form of the contact traction is the Hertzian. So it is possible to express the traction with a Hertzian form and correction factors. 3. The internal stresses are derived in the case of the Hertzian traction profile. The stresses at the center of O-ring show a satisfactory result when compared with the finite element result.

  14. Treatment of coking wastewater by using manganese and magnesium ores

    Energy Technology Data Exchange (ETDEWEB)

    Chen Tianhu; Huang Xiaoming; Pan Min [School of Resources and Environmental Engineering, Hefei University of Technology, Hefei City 230009 (China); Jin Song, E-mail: sjin@uwyo.edu [MWH Americas, 3665 JFK Parkway, Suite 206, Fort Collins, CO 80525 (United States); Department Civil and Architectural Engineering, University of Wyoming, Laramie, WY 82071 (United States); Peng Suchuan [School of Resources and Environmental Engineering, Hefei University of Technology, Hefei City 230009 (China); Fallgren, Paul H. [Western Research Institute, 365 North 9th Street, Laramie, WY 82072 (United States)

    2009-09-15

    This study investigated a wastewater treatment technique based on natural minerals. A two-step process using manganese (Mn) and magnesium (Mg) containing ores were tested to remove typical contaminants from coking wastewater. Under acidic conditions, a reactor packed with Mn ore demonstrated strong oxidizing capability and destroyed volatile phenols, chemical oxygen demand (COD){sub ,} and sulfide from the coking wastewater. The effluent was further treated by using Mg ore to remove ammonium-nitrogen and phosphate in the form of magnesium ammonium phosphate (struvite) precipitates. When pH of the wastewater was adjusted to 1.2, the removal efficiencies for COD, volatile phenol and sulfide reached 70%, 99% and 100%, respectively. During the second step of precipitation, up to 94% of ammonium was removed from the aqueous phase, and precipitated in the form of struvite with phosphorus. The struvite crystals showed a needle-like structure. X-ray diffraction and transmission electron microscopy were used to characterize the crystallized products.

  15. Pretreatment of copper-bearing refractory gold ores by bio-heap leaching

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The refractory gold ores associated with rich copper and trapped in pyrite and quartz were studied. With conventional technique (all-sliming cyanidation), the gold recovery rate is only 51.78%. To eliminate the negative effects of copper and pyrite on cyanidation and increase the gold recovery rate, the investigation on bio-heap leaching pretreatment was made, by which Cu would be dissolved and gold would be liberated from pyrite. The experiment adopted mixed bacteria, mainly Thiobacillus ferrooxidan (named T. f1), as the bacterial catalyst for bio-preconditioning and was carried out in a PVC column with a diameter of 20 cm and a height of 1.3 m loaded with gold ores. The temperature was controlled between 28 and 30℃, the pH value was kept between 2.0-2.5,and the flux of sprinkling bacterial liquid was maintained 0.80 L/h. After 45-day's bio-oxidization, among the samples sizing from 0to 5 mm, the oxidation rates of Cu, Fe and S were respectively 44.62%, 28.16% and 25.46%, and the gold recovery rate by cyaniding increased to 80.35%. The bio-heap leaching pretreatment can therefore effectively dissolve Cu and liberate gold from pyrite and lead to the increase of gold extraction.

  16. How many assay probes to find one ore-bearing asteroid?

    Science.gov (United States)

    Elvis, Martin; Esty, Thomas

    2014-03-01

    The number of ore-bearing asteroids could well be small and remote telescopic techniques are inadequate to identify such asteroids confidently. Finding an asteroid that can be profitably mined requires proximate observations from assay probes. Here we use a simple statistical approach to estimate the number of assay probes, Nassay, needed to find at least one ore-bearing asteroid at a high confidence (90%, 95%, and 99%). We present results for a wide range of values of the probability of an asteroid being rich in the resource of interest, Prich. We find that Nassay depends strongly on Prich, for likely values of Prich (asteroid is found, Nassay=22, and for 99% confidence Nassay=44. A factor two increase in Prich roughly halves Nassay, while for Prich~0.5, Nassay (90%)=4. Hence any improvement in asteroid characterization prior to sending probes to its proximity would be an effective way to cost-effectively search for valuable resources among the asteroids. Some possibilities for doing so are briefly discussed.

  17. Source of ore-forming substances and theoretical problems of metallogeny relevant to the Bayan Obo Fe-REE ore deposits in Inner Mongolia,China

    Institute of Scientific and Technical Information of China (English)

    曹荣龙; 朱寿华; 王俊文

    1995-01-01

    The source of rare earth elements (REE) ore-forming substances is identified to be extremelydistinct from that of iron ores.The Bayan Obo Fe-REE ore deposits were generated by a composite processof both crustal and mantle source mineralization.The original iron bodies are of a sedimentary deposit fromsupergenesis,while the REE ores have been formed by mantle fluid metasomatism superimposed upon thepre-existing iron bodies.It is believed that the REE ore deposit would be controlled by intracontinental hotspot.The H8 dolomite in mine regions belongs to normal sedimentary carbonate rock,its C and O isotopiccomposition rules out the possibility comparable with magrnatic carbonatite.The Sm-Nd isochrons of separatedREE minerals have shown two REE peak mineralization periods:early-middle Proterozoic (1 700 Ma±480 Ma) andCaledonia (424-402 Ma).

  18. Ore petrography of low-grade siliceous manganese ores from the Bonai-Keonjhar belt, Orissa, India: The influence of mineral-fabric on their beneficiation

    Institute of Scientific and Technical Information of China (English)

    Mishra Subrat; Mohapatra Birendra Kumar; Dash Nilima; Rao Danda Srinivas

    2011-01-01

    Low grade siliceous manganese ores from the iron ore group of the Bonai-Keonjhar belt,Orissa,India are found mostly in shear zones.The ore characteristics of siliceous manganese ore samples from three different mines,viz.the Shankar (Barbil OMC lease hold area),the Sone-Patuli (Patmunda,OMM lease hold area),and the Musaghar (Roida,OMDC lease hold area),were studied.These siliceous manganese ores are of three types,respectively:(i) spongy-granular; (ii) massive-mosaic; and (iii) hard-mylonitized.The spongy-granular type contains granular,saccharoidal quartz and the major manganese mineral present is pyrolusite.The second type contains well crystallized quartz and cryptomelane,while the third has cherty,fine grained quartz (mylonite) along with romanechite.All three ores were subjected to physical beneflciation under similar conditions.Both gravity and magnetic separation techniques were employed.The mineral-fabric of the ores has been correlated to the extent of their beneflciation using these physical techniques.Of these three ores only the spongy-granular type responded well to upgrading.The feed with 22% Mn content could be upgraded to 44% with a 28% yield and a 49% recovery.The good response to beneficiation of the spongygranular sample could be due to the large euhedral crystals of pyrolusite and the friable nature of the saccharoidal quartz.This study reveals the influence of mineral-fabric on beneficiation of low grade ore,siliceous Mn ore in particular.

  19. From BIF to Iron Ore - A journey from nanocrystals to huge iron ore deposits of the Hamersley Province, Australia

    OpenAIRE

    Egglseder, Mathias

    2017-01-01

    Banded iron formations (BIFs) are extraordinary rocks because they provide important information about the Precambrian atmosphere and hydrosphere, the global rise of oxygen, and they host the world’s major iron ore deposits. The unique texture and petrology of BIF, which mainly comprise alternating layers of iron oxides and chert remain poorly understood. Although the mineral assemblage is of diagenetic or metamorphic origin, BIF textures are interpreted as sedimentary st...

  20. Plant and soil reactions to nickel ore processed tailings

    Energy Technology Data Exchange (ETDEWEB)

    Sheets, P.J.; Volk, V.V.; Gardner, E.H.

    1982-07-01

    Greenhouse and laboratory experiments were conducted to determine the effect that tailings, produced during the processing of nickeliferous laterite ores by a proposed U.S. Bureau of Mines Process, would have on plant growth and soil properties. The tailings contained soluble salts (7.6 mmhos/cm), NH/sub 4/-N (877 ..mu..g/g), Ni (0.28%), Mn (82 ..mu..g/g DTPA-extractable), Cr (0.44%), P (2 and 6 ..mu..g/g acid F- and NaHCO/sub 3/-extractable, respectively), and Ca and Mg (1.0 and 20.7 meq/100 g NH/sub 4/Ac-extractable, respectively). Water leaching decreased the NH/sub 4/-N concentration to 53 ..mu..g/g and the EC to 0.4 mmhos/cm by removal of (NH/sub 4/)/sub 2/SO/sub 4/ and MgSO/sub 4/ salts. Tall fescue (Festuca arundinacea Schreb.) was grown on Eightlar clay soil (skeletal, serpentinitic, mesic Typic Xerochrept) amended with 0, 223, 446, and 669 g tailings/kg soil and pure, unleached tailings for 32 weeks in the greenhouse. Seedling establishment of plants grown on soil amended at the highest tailings rate and the pure tailings was initially slow, but plants grown on soil amended at lower rates established readily and grew well. Plant P was <0.24%, while plant Ca concentrations were <0.45% throughout the growth period even though Ca(H/sub 2/PO/sub 2/)/sub 2/ and gypsum had been added. Ammonium acetate-extractable Ca at the end of the growth period was <5.0 meq/100 g on all amended soils.The Mn, Ni, and Cr concentrations of plants grown on treated soils were within normal ranges, although soil-analysis values were higher than commonly found. It is recommended that the tailings be washed to reduce NH/sub 4/-N and soluble salts prior to revegetation, and that native soil be added to the surface to reduce crusting.

  1. Leaching of Silver from Boorchi Ag-Pb Ore in Mongolia with Acidic Thiourea Solution

    Institute of Scientific and Technical Information of China (English)

    Nyamdelger Shirchinnamjil; 杨超; 方兆珩

    2008-01-01

    A hydrometalhirgical process to extract silver from the silver-lead ore in Boorchi, Mongolia by using thiourealeaching solution is studied in this work. Through the observation of optical and scanning electron microscopes, and energyspectral analysis, it is determined that 5 kinds of silver minerals exist in the ore, including argentite, Ag-tetrahedrite,Ag-Zn-Sb-tetrahedrite, freibergite and acanthite. The experimental results of direct thiourea leaching of the ore show that56%~60% of silver is leached. The main reason for the low leaching rate is due to silver minerals enveloped in galena andother minerals, even though the ore is ground to the particle size of 75 μm. When the ore is pretreated with ammoniumcarbonate solution under oxidation, the experimental results of thiourea leaching show that the leaching rate of silver increasesto near 75% with the pretreatment. Based on the leaching experiments, a principle hydrometallurgical technological route toextract silver from the Ag-Pb ore is proposed.

  2. Production of titanium silicate compositions from technogenic titanium containing waste of Khibiny ores' enrichment

    Directory of Open Access Journals (Sweden)

    Shchukina E. S.

    2017-03-01

    Full Text Available The low level of complexity in the processing of raw materials at mining and processing enterprises adversely affect the environment causing considerable damage to it. Meanwhile technological waste is a cheap source of raw materials for liquid products of functional purpose, particularly inorganic filler which are widely used in the manufacture of paints and building materials, paper, plastics, insulating and protective materials. Improved performance and physical and chemical properties of materials are achieved by optimizing the composition and dispersion of the particles. By the example of the research subjects received from the flotation waste nepheline ore-dressing, it has been shown that a high degree of homogenization to obtain fine mixtures (75 % of 3–4 micron fraction composite filler powders the ultrafine grinding method achieved by using a planetary ball mill for a short period of time (at least 1 hours. The use of other grinding methods, for example by means of ball mill or a vibration such effect is not obtained. At the conditions of ultrafine grinding the ionization and amorphization of the surface layer of powder material particles (mechanical activated processing are occurred. This increases its activity by reacting with organic and inorganic binding, and provides high performance. The obtained filler has been tested in the composition of temperature-controlled sealants and glues used in the aerospace industry, shipbuilding and electronics. To obtain such materials sphene and nepheline received from industrial tailings of Khibiny apatite-nepheline ore deposits are used

  3. THE EFFICACY OF USING PHOSPHATE SOLUBILIZING MICROORGANISMS IN GRANULAR BIOFERTILIZERS WITH PHOSPHATE ORE

    Directory of Open Access Journals (Sweden)

    Dunaitsev I. A.

    2016-03-01

    Full Text Available Two granular formulations of phosphorus biofertilizers combining rock phosphate and two highly active phosphate solubilizing strains: Acinetobacter species 305 and Pseudomonas species 181а have been investigated. Granules of about 3 mm in size were obtained by contact-convective drying of a mixture of ground ore, concentrated biomass of two different strains, starch and glucose. Micro granules with size of 0.1- 0.5 mm were obtained by spray drying the biomass of two different strains and application of dried cells on the particles of the ground ore. Starch was used as a binder. In the model liquid medium it was shown that the microorganisms have retained the ability to solubilize mineral phosphates in granular formulations prepared. In laboratory pot trial on marigold (Tagetes patula it was demonstrated that both formulations of biofertilizer increased the dry weight of the plants to the same level as that of chemical fertilizer - double superphosphate, but were inferior in the concentration of phosphorus in plants. Both formulations exceeded the effectiveness of rock phosphate and biomass used as biofertilizers both separately and jointly. No significant differences were noted between the two strains and the two granular formulations both for plant dry weight, and the content of phosphorus therein. Both granular formulations of biofertilizer retained their structure and avoided aggregating over a year of storage at 4 oC. The average persistence of living cells in the microbeads was about 1.5%, in granules - 32 %

  4. Enhanced Uranium Ore Concentrate Analysis by Handheld Raman Sensor: FY15 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, Samuel A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Timothy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Orton, Christopher R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-11

    High-purity uranium ore concentrates (UOC) represent a potential proliferation concern. A cost-effective, “point and shoot” in-field analysis capability to identify ore types, phases of materials present, and impurities, as well as estimate the overall purity would be prudent. Handheld, Raman-based sensor systems are capable of identifying chemical properties of liquid and solid materials. While handheld Raman systems have been extensively applied to many other applications, they have not been broadly studied for application to UOC, nor have they been optimized for this class of chemical compounds. PNNL was tasked in Fiscal Year 2015 by the Office of International Safeguards (NA-241) to explore the use of Raman for UOC analysis and characterization. This report summarizes the activities in FY15 related to this project. The following tasks were included: creation of an expanded library of Raman spectra of a UOC sample set, creation of optimal chemometric analysis methods to classify UOC samples by their type and level of impurities, and exploration of the various Raman wavelengths to identify the ideal instrument settings for UOC sample interrogation.

  5. High-carbon fly-ash as a binder for iron ore pellets

    Energy Technology Data Exchange (ETDEWEB)

    Kawatra, S.K.; Eisele, T.C.; Ripke, S.J.; Ramirez, G.

    1999-09-01

    The goal of this project was to convert currently unusable fly-ashes into a material that can be used as a binder for iron ore. Such a binder would also be useful for other high-volume markets, including foundry sand mold binders. Previously, the investigators used fly-ash in combination with calcium hydroxide as an additive while calcium chloride was added as a hardening accelerator. However, the addition of chloride salts have a detrimental effect because chlorine causes corrosion in processing equipment. Therefore, other potential hardening accelerators were investigated during this project. During production, dried iron-ore pellets are required to have crushing strength of at least 22.2 newtons (5 pounds force) per 12.7 mm (1/2 inch) diameter pellet. The pellets are then sintered at temperatures up to 1300 C and must not exhibit a significant degree of spalling or cracking. Pellets will therefore be tested to determine whether acceptable dry crushing strengths can be achieved.

  6. Optimization of Cooling Process of Iron Ore Pellets Based on Mathematical Model and Data Mining

    Institute of Scientific and Technical Information of China (English)

    Gui-ming YANG; Xiao-hui FAN; Xu-ling CHEN; Xiao-xian HUANG; Xi LI

    2015-01-01

    Cooling process of iron ore pellets in a circular cooler has great impacts on the pellet quality and systematic energy exploitation. However, multi-variables and non-visualization of this gray system is unfavorable to efifcient production. Thus, the cooling process of iron ore pellets was optimized using mathematical model and data mining techniques. A mathematical model was established and validated by steady-state production data, and the results show that the calculated values coincide very well with the measured values. Based on the proposed model, effects of important process parameters on gas-pellet temperature proifles within the circular cooler were analyzed to better understand the entire cooling process. Two data mining techniques—Associa-tion Rules Induction and Clustering were also applied on the steady-state production data to obtain expertise operating rules and optimized targets. Finally, an optimized control strategy for the circular cooler was proposed and an operation guidance system was developed. The system could realize the visualization of thermal process at steady state and provide operation guidance to optimize the circular cooler.

  7. Biodiversity and interactions of acidophiles: Key to understanding and optimizing microbial processing of ores and concentrates

    Institute of Scientific and Technical Information of China (English)

    D.B.JOHNSON

    2008-01-01

    Mining companies have become increasingly aware of the potential of microbiological approaches for recovering base and precious metals from low-grade ores,and for remediating acidic,metal-rich wastewaters that drain from both operating and abandoned mine sites.Biological systems offer a number of environmental and (sometimes) economical advantages over conventional approaches,such as pyrometallurgy,though their application is not appropriate in every situation.Mineral processing using micro-organisms has been exploited for extracting gold,copper,uranium and cobalt,and current developments are targeting other base metals.Recently,there has been a great increase in our knowledge and understanding of both the diversity of the microbiology of biomining environments,and of how the microorganisms interact with each other.The results from laboratory experiments which have simulated both stirred tank and heap bioreactor systems have shown that microbial consortia are more robust than pure cultures of mineral-oxidizing acidophiles,and also tend to be more effective at bioleaching and bio-oxidizing ores and concentrates.The paper presented a concise review of the nature and interactions of microbial consortia that are involved in the oxidation of sulfide minerals,and how these might be adapted to meet future challenges in biomining operations.

  8. A circulation mud system used in long-distance ore pipeline transportation

    Science.gov (United States)

    Li, Youling; Wang, Hua

    2011-10-01

    The long-distance ore pipeline transportation is a new and high-tech industry, which is non-polluting, zero emissions, and in line with the strategy needs of national low-carbon economy and energy demand reduction. The long-distance ore transport needs multi-station pumping station transportation, however, the low concentration slurry that does not match the technological requirements, such as slurry head and so on. This paper designs a circulation mud system used in long-distance pipeline transportation, which solves the following issues: (1) the technical pool can't storage water during the period of cleaning mine, so can't meet the needs of non-suspension production; (2) slurry spot cool dry easy to bring serious environmental pollution; (3) the refined iron dug out from the process pool need transport to iron and steel industry, trucking transportation needs a huge costs. Experience has shown that the system effectively improve the production efficiency and propagate.

  9. Synergistic extraction of gold from the refractory gold ore via ultrasound and chlorination-oxidation.

    Science.gov (United States)

    Fu, Likang; Zhang, Libo; Wang, Shixing; Cui, Wei; Peng, Jinhui

    2017-07-01

    A synergistic extraction method for gold from the refractory gold ores via ultrasound and chlorination-oxidation was developed. The effects of solid-liquid ratio, extraction time, ultrasound power, NaClO concentration and NaOH concentration on the extraction rate of gold from the refractory gold ore were investigated. The optimum conditions were as follows: NaClO concentration of 1.5mol/L, NaOH concentration of 1.5mol/L, solid-liquid ratio of 5, ultrasound power of 200W and ultrasound time of 2h. Under the optimal conditions, 68.55% of gold was extracted. However, only 45.8% of gold was extracted after 6h without the ultrasound-assisted extraction. XRD and SEM were used to analyze the influence of ultrasound on the mineral properties and strengthening mechanism. The results showed that the interface layer was peeled, new surface was exposed, reaction resistance was reduced, the liquid-solid reaction was promoted and reaction speed was greatly improved under ultrasound. According to the results of range and variance analysis, the optimum leaching experiment with orthogonal design was almost identical with the optimum experiment of single factor. Among them, the ultrasound power was the most significant factors affecting leaching rate of gold. Compared with other extraction method, the synergistic extraction process decomposed completely sulfide and improved significantly the extraction rate of gold. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Potential human health risks associated with historic ore processing at Berg Aukas, Grootfontein area, Namibia

    Science.gov (United States)

    Mapani, Benjamin; Ellmies, Rainer; Kamona, Frederick; Kříbek, Bohdan; Majer, Vladimír; Knésl, Ilja; Pašava, Jan; Mufenda, Maria; Mbingeneeko, Filadelphia

    2010-11-01

    Health risks to people living at Berg Aukas have been identified through a geochemical study of mine dumps and soils at Berg Aukas. Berg Aukas once served as a mining town, where ores of Pb, V, and Zn were mined and roasted on site until 1979. Roasting of ores produced an unintended hazardous risk in the surrounding area. For this study, soil, crops, and water from the Berg Aukas area were analysed for various pollutants. The main pollutants are metals like Pb, Zn, Cu, Cd, As, Hg and Mo. They are bound to layered silicates, to easily soluble sulphide minerals, or occur in native form. The analytical results show severe heavy metal contamination of the surface soils south and east of Berg Aukas. Crops grown at the National Youth Service, like sweet potatoes, cabbage, and Irish potatoes, accumulate heavy elements that are deleterious to health. Prolonged exposure to As and heavy metals in concentrations as found in the soils and some crops in Berg Aukas can cause severe health problems like diabetes, skin lesions, bladder problems, neurological effects, as well as skin, kidney or lung cancer. Pb affects mental development of children and Pbs to brain retardation. The study aims to help the local community to delineate no-go areas for agricultural use and to either diversify the crops grown on contaminated soils or to grow crops that are less vulnerable to high heavy metal contents in soils or transfer the crops grown on contaminated soils to areas that are not contaminated.

  11. Analysis of Characteristics of Ore about Iron Deposit of Da Hong Mountain in Yun Nan Province

    Directory of Open Access Journals (Sweden)

    Zhang Yuefeng

    2016-01-01

    Full Text Available This thesis aims to analyse the deposit characteristics about Da Hong Mountains Iron ore in Yunnan province. The texture and structure, especially the chemical composition, is different in every section of deposit after comparing. Moreover, the content of SiO2 is much higher than general iron ore. However, the content of other noble metals cannot reach the lowest industrial grade. Da Hong Mountains Iron ore has unique features because of metallogenic periods.

  12. Chemical composition analysis of raw materials used in iron ore sinter plants in Poland

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2014-07-01

    Full Text Available The main goal of the study was the analysis of the chemical compositions of raw materials used in iron ore sinter plants in Poland. The iron ore sintering process is the largest source of emissions of dust and gas pollution in the iron and steel industry. Hematite ores, magnetite concentrates, admixtures (dolomite, limestone and burnt lime, fuels (coke breeze, anthracite and by-products are used in Poland to produce the sinter mixture.

  13. The Revovery of Copper and Cobalt from Oxidized Copper Ore and Converter Slag

    OpenAIRE

    ZİYADANOĞULLARI, Berrin; ZİYADANOĞULLARI, Recep

    1999-01-01

    The aim of this study was to develop a method for obtaining copper and cobalt from oxidized copper ore and converter slag. In order to convert the copper and cobalt into sulfate compounds the main step was to roast the samples obtained by sulfurization and transfer the samples into solution. First the oxidized copper ore was roasted, followed by the mixture of converter slag and oxidized copper ore. Since the levels of copper and cobalt were low, the sulfurization process was carri...

  14. Geological and Mineralogical-technological features chromite ore from nickel-weathering crusts Average Bug

    Directory of Open Access Journals (Sweden)

    Perkov E.S.

    2013-09-01

    Full Text Available Conditions of occurrence and distribution features of chromites ore bodies in the ultra-basic nickel bearing weathering crusts of Middle Bug Area are considered. Main types of exogenous chromites ores in weathering crusts and beyond of them are identified as well as mineralogical, chemical and grain features of mineralization are given. Obtained data are substantiated in order to apply them while developing the efficient schemes of mining and processing of exogenous chromites ores.

  15. Study on the Independent Advance of Ore Breaking in Sublevel Caving in Meishan Iron Mine%梅山铁矿无底柱分段崩落法崩矿步距研究

    Institute of Scientific and Technical Information of China (English)

    董振民; 俞胜建

    2001-01-01

    崩矿步距是框定放出体三维结构参数中的重要一维,当分段高度进路间距已定时,对放矿效果有着决定性的影响。为寻求适应于15 m×15 m结构参数下的合理崩矿步距,本文对15 m段高,15 m间距下的放矿步距与矿石损失贫化指标的关系,分别进行了物理模拟、计算机仿真、放出体工业试验及现场崩矿步距工业试验。%The independent advance of ore breaking is an important dimension in defining 3D structural parameters of drawing-off volume and has a decisive effect on ore drawing results when the sublevel height and access space are set.To find out a rational independent advance of ore breaking that suits to 15 m×15 m structural parameters,physical simulation,computer imitation,industrial tests of drawing-off volume and on-site independent advance of ore-breaking were made to obtain the relationship between the independent advance of ore drawing and ore dilution index at a 15 m sublevel height and a 15 m space.

  16. O-Ring sealing arrangements for ultra-high vacuum systems

    Science.gov (United States)

    Kim, Chang-Kyo; Flaherty, Robert

    1981-01-01

    An all metal reusable O-ring sealing arrangement for sealing two concentric tubes in an ultra-high vacuum system. An O-ring of a heat recoverable alloy such as Nitinol is concentrically positioned between protruding sealing rings of the concentric tubes. The O-ring is installed between the tubes while in a stressed martensitic state and is made to undergo a thermally induced transformation to an austenitic state. During the transformation the O-ring expands outwardly and contracts inwardly toward a previously sized austenitic configuration, thereby sealing against the protruding sealing rings of the concentric tubes.

  17. Lead isotope studies of the Guerrero composite terrane, west-central Mexico: implications for ore genesis

    Science.gov (United States)

    Potra, Adriana; Macfarlane, Andrew W.

    2014-01-01

    New thermal ionization mass spectrometry and multi-collector inductively coupled plasma mass spectrometry Pb isotope analyses of three Cenozoic ores from the La Verde porphyry copper deposit located in the Zihuatanejo-Huetamo subterrane of the Guerrero composite terrane are presented and the metal sources are evaluated. Lead isotope ratios of 3 Cenozoic ores from the El Malacate and La Esmeralda porphyry copper deposits located in the Zihuatanejo-Huetamo subterrane and of 14 ores from the Zimapan and La Negra skarn deposits from the adjoining Sierra Madre terrane are also presented to look for systematic differences in the lead isotope trends and ore metal sources among the proposed exotic tectonostratigraphic terranes of southern Mexico. Comparison among the isotopic signatures of ores from the Sierra Madre terrane and distinct subterranes of the Guerrero terrane supports the idea that there is no direct correlation between the distinct suspect terranes of Mexico and the isotopic signatures of the associated Cenozoic ores. Rather, these Pb isotope patterns are interpreted to reflect increasing crustal contribution to mantle-derived magmas as the arc advanced eastward onto a progressively thicker continental crust. The lead isotope trend observed in Cenozoic ores is not recognized in the ores from Mesozoic volcanogenic massive sulfide and sedimentary exhalative deposits. The Mesozoic ores formed prior to the amalgamation of the Guerrero composite terrane to the continental margin, which took place during the Late Cretaceous, in intraoceanic island arc and intracontinental marginal basin settings, while the Tertiary deposits formed after this event in a continental arc setting. Lead isotope ratios of the Mesozoic and Cenozoic ores appear to reflect these differences in tectonic setting of ore formation. Most Pb isotope values of ores from the La Verde deposit (206Pb/204Pb = 18.674-18.719) are less radiogenic than those of the host igneous rocks, but plot within the

  18. New isotopic evidence bearing on bonanza (Au-Ag) epithermal ore-forming processes

    Science.gov (United States)

    Saunders, James A.; Mathur, Ryan; Kamenov, George D.; Shimizu, Toru; Brueseke, Matthew E.

    2016-01-01

    New Cu, S, and Pb isotope data provide evidence for a magmatic source of metal(loid)s and sulfur in epithermal Au-Ag deposits even though their ore-forming solutions are composed primarily of heated meteoric (ground) waters. The apparent isotopic discrepancy between ore metals and ore-forming solutions, and even between the ore and associated gangue minerals, indicates two different sources of epithermal ore-forming constituents: (1) a shallow geothermal system that not only provides the bulk of water for the ore-forming solutions but also major chemical constituents leached from host rocks (silica, aluminum, potassium, sodium, calcium) to make gangue minerals and (2) metals and metalloids (As, Te, Sb, etc.) and sulfur (±Se) derived from deeper magma bodies. Isotopic data are consistent with either vapor-phase transport of metal(loids) and sulfur and their subsequent absorption by shallow geothermal waters or formation of metallic (Au, Ag, Cu phases) nanoparticles at depth from magmatic fluids prior to encountering the geothermal system. The latter is most consistent with ore textures that indicate physical transport and aggregation of nanoparticles were significant ore-forming processes. The recognition that epithermal Au-Ag ores form in tectonic settings that produce magmas capable of releasing metal-rich fluids necessary to form these deposits can refine exploration strategies that previously often have focused on locating fossil geothermal systems.

  19. Study on dioxin emission inhibition effect by addition of two inhibitors in iron ore sintering process%两种抑制剂对铁矿石烧结过程二(口恶)(口英)减排研究

    Institute of Scientific and Technical Information of China (English)

    戴帆; 谈琰; 李咸伟; 俞勇梅; 何晓蕾; 陈德珍

    2012-01-01

    The inhibition effects on dioxin emission from iron ore sintering process were compared for two inhibitors through a series of sintering-pot experiments. The additions of the two inhibitors, namely urea and carbohydrazide, in the sintering iron ore mixture were arranged as 0.01%, 0.02%, 0.05% and 0.1% (ω) respectively. The results showed that both inhibitors can reduce dioxin emission significantly. For the case of urea inhibitor, the reduction efficiencies of dioxin emission fluctuated with its addition with the highest efficiency 67.74% appeared at the addition of 0.02%; while for carbohydrazide inhibitor the reduction efficiencies of dioxin emission increased with its addition and the highest efficiency reached 78.79% as 0.1% of carbohydrazide was added. Both inhibitors did not change the finger print of dioxin homologues. The inhibition effect on all dioxin homologues formation by urea was coincident with that by carbohydrazide, namely, the isomer distribution of dioxin emissions were not essentially changed except that OCDD and OCDF behaved different for the two inhibitors. Both inhibitors did not change sintering indexs significantly.%研究了尿素和碳酰肼对烧结过程二噁英减排的影响,添加量分别是0.01%,0.02%,0.05%,0.1%(ω:质量浓度).结果表明,两者均对二(口恶)(口英)减排效果显著,其中,尿素对应的减排率随尿素的加入量有所波动,加入量为0.02%时,二噁嗔的毒性当量排放浓度减少了67.74%,为实验最高值.碳酰肼对应的减排率在实验范围内随加入量升高而升高,在最高加入量0.1%处二(口恶)(口英)的毒性当量排放浓度减少了78.79%.两种抑制剂都没有改变二(口恶)(口英)同系物的分布规律,对铁矿烧结过程二(口恶)(口英)同系物形成的抑制作用在绝大范围内是一致的,只有OCDD与OCDF表现出差异性.添加极少量的尿素和肼这2种抑制剂不会给烧结生产带来明显的影响.

  20. Temporal and spectral induced polarization contribution to ore body detection and differenciation.

    Science.gov (United States)

    Schmutz, M.; Camerlynck, C.; Ghorbani, A.; Parisot, J.

    2007-12-01

    The aim of this paper is to show complementarity of temporal and spectral induced polarization, applied to ore body detection and differenciation. Study had been lead into well known geological background through borings, geochemical measurements, and also through some electrical resistivity tomographies. Temporal induced polarization (TIP) material and carry out: TIP had been carried out in a quite original way by employed device, and technique. Measurements had been done with SYSCAL PRO (Iris Instrument, Ltd.) transformed into ELREC PRO: this make it possible to differenciate transmitter device (with VIP generator manufactured by IRIS) from receiver one. The main interests are (i) to avoid internal coupling effects and between transmittor/receptor cables on soil, and (ii) to obtain higher electrical power (until 3000 watt) necessary to reach 30-40m depth. Voltage measurement is done through non-polarizable electrodes. Electrical chargeability and resistivity tomographies had been obtained by lateral device displacement. Pole-dipole device had been chosen because it is the best compromise between minimizing coupling effects, getting enough power to reach wanted depth, and necessary lateral resolution. Spectral induced polarization (SIP) material and carry out : SIP FUCHS II device (manufactured by Radic Research) had been used. As the device is not configurated into a multielectrode way, and as one sounding is very time consuming (about 7 hours), only 2 soundings had been done, located on major chargeability anomalies. First results: A a first analysis, a 3 lauer model can be observed: very resistivive level between 0 and 5m depth (up to 1000 ohm.m), more conductive between 5 and 20-25m depth (50 ohm.m), and finally an increasing resistivity. A finer analysis indicates some big conductive zone 50m wide (50 ohm.m) from surface until 30m depth. This could be exlplained by clay or ore body presence. Chargeability analysis indicate us values very high chargeabilities

  1. Potential ecological and human health risks of heavy metals in surface soils associated with iron ore mining in Pahang, Malaysia.

    Science.gov (United States)

    Diami, Siti Merryan; Kusin, Faradiella Mohd; Madzin, Zafira

    2016-10-01

    The composition of heavy metals (and metalloid) in surface soils of iron ore mine-impacted areas has been evaluated of their potential ecological and human health risks. The mining areas included seven selected locations in the vicinity of active and abandoned iron ore-mining sites in Pahang, Malaysia. Heavy metals such as Fe, Mn, Cu, Zn, Co, Pb, Cr, Ni, and Cd and metalloid As were present in the mining soils of the studied area, while Cu was found exceeding the soil guideline value at all sampling locations. However, the assessment of the potential ecological risk index (RI) indicated low ecological risk (RI between 44 and 128) with respect to Cd, Pb, Cu, As, Zn, Co, and Ni in the surface soils. Contributions of potential ecological risk [Formula: see text]by metal elements to the total potential ecological RI were evident for Cd, As, Pb, and Cu. Contribution of Cu appears to be consistently greater in the abandoned mining area compared to active iron ore-mining site. For non-carcinogenic risk, no significant potential health risk was found to both children and adults as the hazard indices (HIs) were all below than 1. The lifetime cancer risk (LCR) indicated that As has greater potential carcinogenic risk compared to other metals that may induce carcinogenic effects such as Pb, Cr, and Cd, while the LCR of As for children fell within tolerable range for regulatory purposes. Irrespective of carcinogenic or non-carcinogenic risk, greater potential health risk was found among children (by an order of magnitude higher for most metals) compared to adults. The hazard quotient (HQ) and cancer risk indicated that the pathways for the risk to occur were found to be in the order of ingestion > dermal > inhalation. Overall, findings showed that some metals and metalloid were still present at comparable concentrations even long after cessation of the iron ore-mining activities.

  2. Turbulent shear flow downstream of a sphere with and without an o-ring located over a plane boundary

    Directory of Open Access Journals (Sweden)

    Sahin Besir

    2012-04-01

    Full Text Available Flow-structure interaction of separated shear flow from the sphere and a flat plate was investigated by using dye visualization and the particle image velocimetry technique. Later, a passive control method was applied with 2mm oring located on the sphere surface at 55° from front stagnation point. The experiments were carried out in open water channel for Reynolds number value of Re=5000. Flow characteristics have been examined in terms of the 2-D instantaneous and time-averaged velocity vectors, patterns of vorticity, streamlines, rms of velocity fluctuations and Reynolds stress variations and discussed from the point of flow physics, vortex formation, lengths of large-scale Karman Vortex Streets and Kelvin-Helmholtz vortices depending on the sphere locations over the flat plate. It is demonstrated that the gap flow occurring between the sphere bottom point and the flat plate surface has very high scouring effect until h/d=0.25 and then unsymmetrical flow structure of the wake region keeps up to h/D=1.0 for smooth sphere. For the sphere with o-ring, the wake flow structure becomes symmetrical at smaller gap ratios and reattachment point on the flat plate surface occurs earlier. Moreover, o-ring on the sphere diminishes peak magnitudes of the flow characteristics and thus it is expected that the flow-induced forces will be lessened both on the sphere and flat plate surface. Vortex formation lengths and maximum value occurring points become closer locations to the rear surface of the sphere with o-ring.

  3. Turbulent shear flow downstream of a sphere with and without an o-ring located over a plane boundary

    Science.gov (United States)

    Ozgoren, Muammer; Okbaz, Abdulkerim; Dogan, Sercan; Sahin, Besir; Akilli, Huseyin

    2012-04-01

    Flow-structure interaction of separated shear flow from the sphere and a flat plate was investigated by using dye visualization and the particle image velocimetry technique. Later, a passive control method was applied with 2mm oring located on the sphere surface at 55° from front stagnation point. The experiments were carried out in open water channel for Reynolds number value of Re=5000. Flow characteristics have been examined in terms of the 2-D instantaneous and time-averaged velocity vectors, patterns of vorticity, streamlines, rms of velocity fluctuations and Reynolds stress variations and discussed from the point of flow physics, vortex formation, lengths of large-scale Karman Vortex Streets and Kelvin-Helmholtz vortices depending on the sphere locations over the flat plate. It is demonstrated that the gap flow occurring between the sphere bottom point and the flat plate surface has very high scouring effect until h/d=0.25 and then unsymmetrical flow structure of the wake region keeps up to h/D=1.0 for smooth sphere. For the sphere with o-ring, the wake flow structure becomes symmetrical at smaller gap ratios and reattachment point on the flat plate surface occurs earlier. Moreover, o-ring on the sphere diminishes peak magnitudes of the flow characteristics and thus it is expected that the flow-induced forces will be lessened both on the sphere and flat plate surface. Vortex formation lengths and maximum value occurring points become closer locations to the rear surface of the sphere with o-ring.

  4. High-performance reagent modes for flotation recovery of platiniferous copper and nickel sulfides from hard-to-beneficiate ores

    Science.gov (United States)

    Matveeva, T. N.; Chanturiya, V. A.

    2017-07-01

    The paper presents the results of the recent research performed in IPKON Russian Academy of Sciences that deals with development and substantiation of new selective reagents for effective flotation recovery of non-ferrous and noble metals from refractory ores. The choice and development of new selective reagents PTTC, OPDTC, modified butylxanthate (BXm) and modified diethyl-dithiocarbamate (DEDTCm) to float platiniferous copper and nickel sulfide minerals from hard-to-beneficiate ores is substantiated. The mechanism of reagents adsorption and regulation of minerals floatability is discussed. The study of reagent modes indicates that by combining PTTC with the modified xanthate results in 6 - 7 % increase in the recovery of copper, nickel and PGM in the flotation of the low-sulfide platiniferous Cu-Ni ore from the Fedorovo-Panskoye deposit. The substitution of OPDTC for BX makes it possible to increase recovery of Pt by 13 %, Pd by 9 % and 2 - 4 times the noble metal content in the flotation concentrate.

  5. Osmium isotope evidence for a crustal origin of platinum group elements in the Sudbury nickel ore, Ontario, Canada

    Science.gov (United States)

    Dickin, A. P.; Richardson, J. M.; Crocket, J. H.; McNutt, R. H.; Peredery, W. V.

    1992-09-01

    Sulphide ores from the International Nickel Company's (INCO) Creighton Mine, Sudbury, were analysed for osmium isotope ratios by ICP-MS. Rhenium and osmium abundances were determined by isotope dilution using a mixed spike in solid solution in a nickel sulphide matrix. Calculated initial 187Os /188Os ratios at 1.85 Ga (the emplacement age of the Sudbury complex) cluster around 0.60. The occurrence of less radiogenic compositions is attributed to post-emplacement, open-system behaviour of the Re/Os system. The Creighton results strongly overlap the initial ratios of published osmium data from two other Sudbury mines, suggesting a narrow range of isotope ratio in the original ore, within the range of estimated osmium isotope compositions in the country rock at 1.85 Ga, using published and new data. Therefore, the sulphide ores of the Sudbury complex can have an entirely crustal source without a mantle-derived contribution. This conclusion is consistent with published neodymium isotope data for the complex and supports the meteorite impact hypothesis, since this is the most effective means of fusing the large quantity of crustal rocks necessary to generate the complex. The extraction of platinum group elements (PGE) from this silicate melt by a nickel sulphide liquid was probably analogous to the laboratory fire assay procedure.

  6. Authigenetic K—feldspars and Their Relations to Sn—polymetallic Mineralization in the Dachang Ore Field

    Institute of Scientific and Technical Information of China (English)

    潘家华; G.C.AMSTUTZ

    1993-01-01

    Sn-polymetallic ores at Dachang,Guangxi Autonomous Region,China,are hosted in Middle-Upper Devonian reef limestones,siliceous rocks,banded and lenticular limestones,etc.Two types of orebodies can be distinguished according to their telations to the bedding:one is distributed along the bedding and the.other cuts across the bedding.Sn and sulfide orebodies associated with K-feldspare are mostly characterized by laminated ore structure. Microscopic examinations of K-feldspar-bearing rocks,in conjunction with X-ray diffraction,chemical composiion and cathodoluminescence data for K-feldspars,as well as their telations to mineralization,the authors consider that the K-feldspare are of authigenic origin,subordinate to the epigenetic stage of diagenesis,They resulted from the reaction of mixed,deep-seated,circulating underground hot waters rich in K,Al and Si with argillaceous carbonates during the Indo nesian orogenic movement.It is suggested more attention should be paid to the effect of authigenic K-feldspars on Sn mineralization.In the meantime the event related to circulating underground hot waters should also be taken into account so as to provide new clues to blind ore prospecting.

  7. The control of H2S in biogas using iron ores as in situ desulfurizers during anaerobic digestion process.

    Science.gov (United States)

    Zhou, Qiying; Jiang, Xia; Li, Xi; Jiang, Wenju

    2016-09-01

    In this study, five kinds of iron ores, limonite, hematite, manganese ore, magnetite and lava rock, were used as the in situ desulfurizers in the anaerobic digestion reactors to investigate their effects on controlling H2S in biogas. The results show that the addition of the five iron ores could significantly control the content of H2S in biogas, with the best performance for limonite. As limonite dosages increase (10-60 g/L), the contents of H2S in biogas were evidently decreased in the digesters with different initial sulfate concentrations (0-1000 mg/L). After the anaerobic digestion, the removed sulfur was mostly deposited on the surface of limonite. A possible mechanism of H2S control in biogas by limonite was proposed preliminarily, including adsorption, FeS precipitation, and Fe (III) oxidation. The results demonstrated that limonite was a promising in situ desulfurizer for controlling H2S in biogas with low cost and high efficiency.

  8. Helium, lead and sulfur isotope geochemistry of the Gejiu Sn-polymetallic ore deposit and the sources of ore-forming materials

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Studies on the helium, lead and sulfur isotopic composition were performed of the Gejiu super-large Sn-polymetallic ore deposit. The results indicated that the ore-forming materials came from different sources and the deposit is a product of superimposed mineralization. The deposit is characterized by multi-source and multi-period mineralization, which experienced submarine hydrothermal deposition and Late Yanshanian magmatic hydrothermal mineralization. It is held that the Gejiu super-large Sn-polymetallic ore deposit is a multi-genesis deposit.

  9. Analytical fingerprint for tantalum ores from African deposits

    Science.gov (United States)

    Melcher, F.; Graupner, T.; Sitnikova, M.; Oberthür, T.; Henjes-Kunst, F.; Gäbler, E.; Rantitsch, G.

    2009-04-01

    Illegal mining of gold, diamonds, copper, cobalt and, in the last decade, "coltan" has fuelled ongoing armed conflicts and civil war in a number of African countries. Following the United Nations initiative to fingerprint the origin of conflict materials and to develop a traceability system, our working group is investigating "coltan" (i.e. columbite-tantalite) mineralization especially in Africa, also within the wider framework of establishing certified trading chains (CTC). Special attention is directed towards samples from the main Ta-Nb-Sn provinces in Africa: DR Congo, Rwanda, Mozambique, Ethiopia, Egypt and Namibia. The following factors are taken into consideration in a methodological approach capable of distinguishing the origin of tantalum ores and concentrates with the utmost probability: (1) Quality and composition of coltan concentrates vary considerably. (2) Mineralogical and chemical compositions of Ta-Nb ores are extremely complex due to the wide range of the columbite-tantalite solid solution series and its ability to incorporate many additional elements. (3) Coltan concentrates may contain a number of other tantalum-bearing minerals besides columbite-tantalite. In our approach, coltan concentrates are analyzed in a step-by-step mode. State-of-the-art analytical tools employed are automated scanning electron microscopy (Mineral Liberation Analysis; MLA), electron microprobe analysis (major and trace elements), laser ablation-ICP-MS (trace elements, isotopes), and TIMS (U-Pb dating). Mineral assemblages in the ore concentrates, major and trace element concentration patterns, and zoning characteristics in the different pegmatites from Africa distinctly differ from each other. Chondrite-normalized REE distribution patterns vary significantly between columbite, tantalite, and microlite, and also relative to major element compositions of columbites. Some locations are characterized by low REE concentrations, others are highly enriched. Samples with

  10. CHAIN EXTENDER AND EMULSIFIER APPLICATION IN IRON ORE FLOTATION

    Directory of Open Access Journals (Sweden)

    José Pedro da Silva

    2013-06-01

    Full Text Available The present study aims to evaluate the reverse flotation performance of iron ore, using collector (amine, in the presence and absence of chain extender (diesel oil and emulsifier (sodium lauryl sulfate.Six tests were realized with duplicate. Tests using amine, diesel oil and sodium lauryl sulphate show the better results, with metallurgical recovery of 91.82% and the concentrate silica equal 1.68%. Thus, it is found that the use of emulsifier and chain extender together with the amine, shows better results in the flotation, in terms of metal recovery and selectivity, when compared to using only amine or amine and diesel oil.

  11. Thermal Decomposition of Copper Ore Concentrate and Polyethylene Composites

    Science.gov (United States)

    Szyszka, Danuta; Wieckowska, Jadwiga

    2016-10-01

    Thermal analyses (TGA and DTA) of the composite, comprised of 10% polyethylene (PE) scrap and 90% copper ore concentrate, enabled determination of the temperature range and decomposition degree of the organic matters in argon atmosphere. Products of pyrolysis were qualitatively and quantitatively determined. The results were compared to those obtained for products of pyrolysis of the composite in air. Products of pyrolysis were identified by means of the gas chromatography (GC) method alone or supported with results of mass spectrometry analyses (GC-MS).

  12. TECHNOLOGICAL CHARACTERISTICS OF THE ZLATÁ BAŇA ORES

    Directory of Open Access Journals (Sweden)

    Košuth Marián

    1997-10-01

    Full Text Available The main processing interest of examined Zlatá Baňa polymetalic ores was focused on copper-lead-zinc minerals with precious metals and trace elements. Gold occurrin a native form or as an isomorphism in pyrite. The role of inclusions of own Ag-minerals was inflated by geologist, but a prevailing amount of silver is isomorphous in galena and argentotetrahedrite. Almost no possibility to concentrating discrete silver minerals was proved technologically. In galena, an interesting content of Se and Te was registered. Among trace elements, a higher content of cadmium folows exclusively the content of zinc in blende.

  13. Topological aperiodicity for product systems over semigroups of Ore type

    DEFF Research Database (Denmark)

    Kwasniewski, Bartosz; Szymanski, Wojciech

    2016-01-01

    We prove a version of uniqueness theorem for Cuntz-Pimsner algebras of discrete product systems over semigroups of Ore type. To this end, we introduce Doplicher-Roberts picture of Cuntz-Pimsner algebras, and the semigroup dual to a product system of 'regular' C*-correspondences. Under a certain...... aperiodicity condition on the latter, we obtain the uniqueness theorem and a simplicity criterion for the algebras in question. These results generalize the corresponding ones for crossed products by discrete groups, due to Archbold and Spielberg, and for Exel's crossed products, due to Exel and Vershik...

  14. Sandbox experiments on Uraninite Ore: ERT and SP measurments.

    Science.gov (United States)

    Singh, R. K.

    2015-12-01

    Nuclear energy, considering its own intrinsic merits, would be a leading source for meeting the energy requirement in present and future scenario. Concealed Uranium deposits under sedimentary cover, with poor surface indications calls for reorientation of survey with large inputs involving integrated geophysical approach. Sand Box experiments have been carried out over Uraninite ore. The tank is a glass fish tank (height 39 cm, length 75 cm, width 30 cm). It was filled with sand up to 35 cm high. The sand was saturated from below to minimize the entrapment of the gas bubbles. The average size for sand grains is ~ 0.295mm. The formation factor of the sand is 3.5, with a negligible surface conductivity because of the coarse nature of the sand grains. The dimension of considered Uraninite ore sample is 4cm x 4cm x 4cm. The depth of top of the ore sample is kept at 3cm. In this paper both resistivity and self-potential measurements were carried out for possible detection of Uraninite. The resistivity measurements were made with 64 non-polarizable electrodes using Electrical Resistivity Tomography (ERT) equipment of FlashRes Universal developed by ZZ Resistivity Imaging Pty. Ltd. We have used screws of length 3cm as electrodes. The separation between these electrodes are ~ 1cm. The resistivity tomography results clearly outlines the target Uraninite body. The resistivity tomography results also detects small heterogeneities associated with air bubbles possibly due to unsaturated pore spaces. SP measurements were made using two non-polarizing Pb/PbCl2 electrodes and a Fluke 289 voltmeter (sensitivity 0.001 mV, internal impedance 100 MOhm). The reference electrode was located on the corner of the sandbox. The other electrode was used to scan the electrical potential at the surface of the sand. SP measurements were made with a spacing of 3 cm over the same ERT profile. The SP results also shows a dip (or a low SP anomaly) over the target ore body sample. Thus, both SP and

  15. Mineralogical Study of Zard Koh and Kulli Koh Iron Ore Deposits of Pakistan

    Directory of Open Access Journals (Sweden)

    SULTAN AHMED KHOSO

    2017-10-01

    Full Text Available Zard Koh and Kulli Koh are two recently discovered iron ore deposits, existing in the Chagai district, Balochistan, Pakistan. PSM (Pakistan Steel Mill Limited is interested to utilize these ore deposits at priority. Purpose of the present study was to assess the mineralogy of the Zard Koh and Kulli Koh iron ore deposits, as it plays a vital role in the selection of an appropriate processing method. The mineralogical study of ore deposits was carried out by XRD (X-Ray Diffraction, XRF (X-Ray Fluorescence, SEM (Scanning Electron Microscope attached with EDS (Energy Dispersive Spectroscope and SM (Stereomicroscope techniques. Results indicated that the Zard Koh ore is mainly composed of 60.15% maghemite, 23.57% pyrite, 4.07% chlorite, 10.30% grossular and 1.65% admontite minerals. The chemical analysis revealed that Zard Koh iron ore contains an average of 54.27% Fe, 12.73% S, 8.70% Si, 3.07% Al, 4.07% Ca, and 2.16% Mg. Similarly, the mineralogical study of the Kulli Koh iron ore indicated that, ore is containing 51.16% hematite, 29.24% quartz, 8.89% dravite, and 8.76% kaolinite minerals. Elemental analysis of different samples indicated that Kulli Koh iron ore contains an average composition of 40.23% Fe, 20.67% Si, 3.44% Ca, 3.81% Al and 3.25% Mg. Mineralogical study of the Zard Koh and Kulli Koh iron ore deposits suggested that these ore deposits can be beneficiated costeffectively by using magnetic separation techniques.

  16. Influence of a High-Pressure Comminution Technology on Concentrate Yields in Copper Ore Flotation Processes

    Directory of Open Access Journals (Sweden)

    Saramak D.

    2014-10-01

    Full Text Available The article concerns the issues of flotation process effectiveness in relationship to the operating conditions of a high-pressure comminution process course. Experimental programme covering a flotation laboratory batch tests was a verification technique of a high-pressure crushing operations course. The most favorable values of flotation concentrate weight recoveries were obtained for the pressing force 6 kN and 4% of the feed moisture. It was also determined the model of the concentrate weight recovery as a function of pressing force in the press and feed moisture content. This model was the basis for the optimization of effects of copper ore flotation processes preceded in high-pressure crushing operation in roller presses.

  17. Is assimilation of country rocks in camera of crystallization an important factor for origin of the Noril'sk ores?

    Science.gov (United States)

    Krivolutskaya, Nadezhda; Kryazhev, Sergey; Svirskaya, Natalia

    2013-04-01

    In origin of the unique PGE-Cu Noril'sk deposits a great significance is attached to assimilation of country rocks by mafic melts in camera of crystallization for formation large-scale sulfide ore bodies. The main argument in favor of widespread assimilation is the enrichment of ore sulfides in the heavy sulfur isotope due to the participation of anhydrite from country rocks (Godlevsky, Grinenko, 1963). But real data demonstrated this process are almost absent in literature. We have studied geochemistry rocks of some sections from surrounding rocks to intrusive ones with sulfide ores. Two of them were done at the Southern Maslovsky deposit located in basalts and one was considered at Talnakh deposit (SW branch) that is situated among carbonate-terrigenouse rocks with evaporates (salt, anhydrite, gypsum). Ores at the Maslovsky deposit are characterized by δ34S = 6-11‰ while the host basalts of the Nadezhdinsky Formation have δ34S country basalts on composition of intrusive rocks is not detected at all and revealed in a narrow zone (country rocks by magma must be reflected in change of chemical and modal composition of intrusive rocks, especially in contact zones of intrusions, but this effect is noted established. Line of component variations have sharp profile from sedimentary rocks to gabbro-dolerites without intermediate values. It shows an absent of contamination in situ. Data on Nd, Sr, and Pb isotopic compositions of anydrite from the Devonian rocks demonstrate that the initial 87Sr/86Sr ratio (0.708637-0.708949, 251 Ma) in anhydrite is lower than in the Nadezhdinsky basalt, where this ratio attains 0.709171 (Wooden et al., 1993), The studied samples are characterized by anomalous enrichment in radiogenic lead (206Pb/204Pb attains 24.53). It would be expressed in isotopic composition of contaminated igneous rocks, but this is not the case. Thus, anhydrite cannot be a contaminant for igneous rocks and assimilation of country rocks in intrusive chambers was

  18. Mineralogical and geochemical characteristics of the Noamundi-Koira basin iron ore deposits (India)

    Science.gov (United States)

    Mirza, Azimuddin; Alvi, Shabbar Habib; Ilbeyli, Nurdane

    2015-04-01

    India is one of the richest sources of iron ore deposits in the world; and one of them is located in the Noamundi-Koira basin, Singhbhum-Orissa craton. The geological comparative studies of banded iron formation (BIF) and associated iron ores of Noamundi-Koira iron ore deposits, belonging to the iron ore group in eastern India, focus on the study of mineralogy and major elemental compositions along with the geological evaluation of different iron ores. The basement of the Singhbhum-Orissa craton is metasedimentary rocks which can be traced in a broadly elliptical pattern of granitoids, surrounded by metasediments and metavolcanics of Greenstone Belt association. The Singhbhum granitoid is intrusive into these old rocks and to younger, mid Archaean metasediments, including iron formations, schists and metaquartzites and siliciclastics of the Precambrian Iron Ore Group (Saha et al., 1994; Sharma, 1994). The iron ore of Noamundi-Koira can be divided into seven categories (Van Schalkwyk and Beukes 1986). They are massive, hard laminated, soft laminated, martite-goethite, powdery blue dust and lateritic ore. Although it is more or less accepted that the parent rock of iron ore is banded hematite jasper (BHJ), the presence of disseminated martite in BHJ suggests that the magnetite of protore was converted to martite. In the study area, possible genesis of high-grade hematite ore could have occurred in two steps. In the first stage, shallow, meteoric fluids affect primary, unaltered BIF by simultaneously oxidizing magnetite to martite and replacing quartz with hydrous iron oxides. In the second stage of supergene processes, deep burial upgrades the hydrous iron oxides to microplaty hematite. Removal of silica from BIF and successive precipitation of iron resulted in the formation of martite- goethite ore. Soft laminated ores were formed where precipitation of iron was partial or absent. The leached out space remains with time and the interstitial space is generally filled

  19. 鹤壁十矿顺层钻孔瓦斯抽采有效半径的测定%Hebi ten ore bedding borehole gas extraction determination of the effective radius

    Institute of Scientific and Technical Information of China (English)

    朱俊杰

    2014-01-01

    通过研究抽放瓦斯钻孔有效抽放半径的测定方法,为瓦斯抽放钻孔的布置提供科学依据,提高了防突措施的有效性。选取鹤壁十矿1206下顺槽为实验地点,以瓦斯抽放钻孔的防突机理为指导,合理选择了压力降低法作为实验测定方法进行现场实践。%By studying the determination method of the effective drainage radius of drainage gas drilling, providing scientific basis for gas drainage borehole layout, improve the effectiveness of the outburst prevention measures.The 1206 crossheading is selected as experimental sites in Hebi no.10 coal mine, Guided by the protection against outburst mechanism of the gas drainage borehole, reasonably select the pres-sure reducing method as the experiment method on-site practice.

  20. Phase transformations of a talc ore under heated chlorine atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, P., E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI-CONICET), Chacabuco y Pedernera, 5700 San Luis (Argentina); Ruiz, M. del C. [Instituto de Investigaciones en Tecnología Química (INTEQUI-CONICET), Chacabuco y Pedernera, 5700 San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, 5700 San Luis (Argentina); González, J. [Instituto de Investigaciones en Tecnología Química (INTEQUI-CONICET), Chacabuco y Pedernera, 5700 San Luis (Argentina); Instituto de Ciencias Básicas, Universidad Nacional de Cuyo, Mendoza (Argentina)

    2013-02-20

    Highlights: ► We studied the effect of Cl{sub 2} on minerals present in a talc of ultramafic origin. ► Isothermal and non-isothermal assays were performed in N{sub 2} and Cl{sub 2}–N{sub 2} atmospheres. ► The reagents and the products were analyzed by DTA, XRD, SEM, and EPMA. ► The chlorination produced protoenstatite at 800 °C. ► Calcination of a talc ore in Cl{sub 2} produces more enstatite than thermal treatment in N{sub 2}. - Abstract: The effect of Cl{sub 2} on the phase transformations of the minerals present in a talc (Mg{sub 3}Si{sub 4}O{sub 10}(OH){sub 2}) unpurified with clinochlore (Mg{sub 5}Al{sub 2}Si{sub 3}O{sub 10}(OH){sub 8}), magnesite (MgCO{sub 3}), dolomite (MgCa(CO{sub 3}){sub 2}), hematite (Fe{sub 2}O{sub 3}) and pyrite (FeS{sub 2}) was studied with the purpose of deferricating the mineral and obtaining protoenstatite (MgSiO{sub 3}), which is the basic component of steatite ceramics. Isothermal and non-isothermal assays in N{sub 2} and Cl{sub 2}–N{sub 2} atmospheres were performed using a thermogravimetric device at temperatures between 600 and 980 °C. The reagents and the products were analyzed by differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and electron probe microanalysis (EPMA). Results obtained showed that the following phenomena were produced in Cl{sub 2}: (a) The transformation of vitreous silica (SiO{sub 2}), from the chlorination reaction of talc, into enstatite (MgSiO{sub 3}) started at about 700 °C, being dolomite the mineral that favored this reaction. At 800 °C, more enstatite was formed as a result of the reaction between vitreous silica not transformed, MgCl{sub 2} and O{sub 2} derived from the chlorination of dolomite and magnesite; then, polymorphic transformation of enstatite into protoenstatite was produced. (b) At about 950 °C, CaCl{sub 2} produced as a result of dolomite chlorination led to the destruction of the protoenstatite

  1. 40Ar-39Ar Dating of Quartz from Ore in the Baiyangping Cu-Co Polymetallic Ore-Concentrated Area, Lanping Basin, Yunnan

    Institute of Scientific and Technical Information of China (English)

    何明勤; 刘家军; 李朝阳; 李志明; 刘玉平; 杨爱平; 桑海清

    2004-01-01

    40Ar-39Ar fast neutron activation age spectrum of quartz in ore collected from the Baiyangping Cu-Co polymetallic ore-concentrated area, Lanping Basin, is saddle-shaped. The plateau age, minimum appearance age and isochron age shown on the spectra are 56.53±0.43 Ma, 55.52±1.78 Ma and 55.90±0.29 Ma respectively. The age data are consistent with each other within 1σ uncertainties. Because the given initial 40Ar/36Ar value of 294.7±1.14 is very close to Nier's value (295.5±5), both plateau and isochron ages may be considered as the forming time of quartz. So the age of 55.90-56.53 Ma represents the forming age of ore deposits. It is obvious that the ore deposits were formed during the Early Himalayan period.

  2. Remobilisation features and structural control on ore grade distribution at the Konkola stratiform Cu-Co ore deposit, Zambia

    Science.gov (United States)

    Torremans, K.; Gauquie, J.; Boyce, A. J.; Barrie, C. D.; Dewaele, S.; Sikazwe, O.; Muchez, Ph.

    2013-03-01

    The Konkola deposit is a high grade stratiform Cu-Co ore deposit in the Central African Copperbelt in Zambia. Economic mineralisation is confined to the Ore Shale formation, part of the Neoproterozoic metasedimentary rocks of the Katanga Supergroup. Petrographic study reveals that the copper-cobalt ore minerals are disseminated within the host rock, sometimes concentrated along bedding planes, often associated with dolomitic bands or clustered in cemented lenses and in layer-parallel and irregular veins. The hypogene sulphide mineralogy consists predominantly of chalcopyrite, bornite and chalcocite. Based upon relationships with metamorphic biotite, vein sulphides and most of the sulphides in cemented lenses were precipitated during or after biotite zone greenschist facies metamorphism. New δ34S values of sulphides from the Konkola deposit are presented. The sulphur isotope values range from -8.7‰ to +1.4‰ V-CDT for chalcopyrite from all mineralising phases and from -4.4‰ to +2.0‰ V-CDT for secondary chalcocite. Similarities in δ34S for sulphides from different vein generations, earlier sulphides and secondary chalcocite can be explained by (re)mobilisation of S from earlier formed sulphide phases, an interpretation strongly supported by the petrographic evidence. Deep supergene enrichment and leaching occurs up to a km in depth, predominantly in the form of secondary chalcocite, goethite and malachite and is often associated with zones of high permeability. Detailed distribution maps of total copper and total cobalt contents of the Ore Shale formation show a close relationship between structural features and higher copper and lower cobalt contents, relative to other areas of the mine. Structural features include the Kirilabombwe anticline and fault zones along the axial plane and two fault zones in the southern limb of the anticline. Cobalt and copper behave differently in relation to these structural features. These structures are interpreted to have

  3. Phytoremediation: a novel approach for utilization of iron-ore wastes.

    Science.gov (United States)

    Mohanty, Monalisa; Dhal, Nabin Kumar; Patra, Parikshita; Das, Bisweswar; Reddy, Palli Sita Rama

    2010-01-01

    Large quantities of iron-ore tailings are being generated annually in the world from mining and processing of iron ores. It has been estimated that around 10-15% of the iron ore mined in India has remained unutilized and discarded as slimes during mining and subsequent processing. Soil contamination resulting from mining activities affects surrounding flora and fauna and presents a large clean-up challenge to the mining industry. Innovative new methodologies have been proposed and among the most promising are those that rely on new phytoremediation technology. In this paper we address and review the status of phytoremediation as a technology to reduce and control contaminated mine wastes. Several different approaches and different plant species are used to remove environmentally toxic metals from mine waste sites. Such approaches have the objective of restoring mining waste sites to human and animal use, or at least, to curtail or eliminate the off-site movement of toxic entities that potentially could reach humans. How well phytoremediation performs as an alternative soil restoration technology depends on several factors, including the composition of soil, toxicity level of the contaminant, degree to which plant species fit natural local growth patterns and type of concentration of metal/contaminant in such plants. Phytoremediation has opened prospects for less costly, yet practicable approaches to clean-up contaminated waste sites, particularly those associated with mineral extraction mining. We discuss several plant species that are capable of phytoextracting and/or phytostabilizing harmful elements from contaminated soil and water; such processes are prospectively effective for addressing waste problems that derive from mining and processing activities, as well as those that derive from mitigating the threat posed by waste that surrounds mining sites. Unfortunately, phytoremediation is still in the embryonic stage, and more research is needed to find the plant

  4. Iron ore Development and supplies from Third world: A Potential for Sustainable Development.

    Directory of Open Access Journals (Sweden)

    Abdurrauf A. Ibrahim

    2014-12-01

    Full Text Available This paper discuss the qualitative leaching of iron ore in hydrochloric acid and multi gravity separation method as new strategies for reducing lost of iron during production. The focus of the paper is on the potential of iron ore development and supplies from Third world for Sustainable Development and to enter and sustain in the export global competitive Market..

  5. Methods of Dust Air Flows Reduction at Ore Transfer Facilities of Mining and Processing Plants

    Directory of Open Access Journals (Sweden)

    Gulmira K. Saparova

    2013-01-01

    Full Text Available The article describes the most typical schemes of ore stationary transfers. Aspirate units, depending on dust intensity are divided into three groups. Typical schemes of stationary transfers were presented. On the ground of the research, the classification of ore transfer facilities types at mining and processing plants was offered

  6. 40 CFR 440.30 - Applicability; description of the uranium, radium and vanadium ores subcategory.

    Science.gov (United States)

    2010-07-01

    ... for the extraction of uranium, radium and vanadium. Only vanadium byproduct production from uranium... uranium, radium and vanadium ores subcategory. 440.30 Section 440.30 Protection of Environment... SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.30 Applicability; description of...

  7. Relaxation phenomena and jointing in ore bodies under explosive injection treatment

    Science.gov (United States)

    Shevchenko, YuS

    2017-02-01

    Under analysis are relaxation phenomena in ore bodies under leaching. It is shown that liquid and gas–liquid phases make these phenomena last longer, thus it is recommended to apply synergetically interconnected processes of explosive fracture of an ore block and simultaneous injection of active leaching solutions in the generated system of joints.

  8. Tungsten and Molybdenum Ores in China and the Management Policies(Part Ⅰ)

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>China is traditionally a leading producer of tungsten and molybdenum ores in the world. The ores are densely distributed and easy to exploit,and the production accounts for a large share of the world’s total.But China has yet to dominate the market and the advantage that China has long enjoyed is being weakened,giv-

  9. Silicophosphate Sorbents, Based on Ore-Processing Plants' Waste in Kazakhstan

    Science.gov (United States)

    Kubekova, Sholpan N.; Kapralova, Viktoria I.; Telkov, Shamil A.

    2016-01-01

    The problem of ore-processing plants' waste and man-made mineral formations (MMF) disposal is very important for the Republic of Kazakhstan. The research of various ore types (gold, polymetallic, iron-bearing) MMF from a number of Kazakhstan's deposits using a complex physical and chemical methods showed, that the waste's main components are…

  10. The gold contained in imported lead ore concentrate is exempted from import value-added tax

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>According to the No. 14 proclamation issued by Customs Service, as from April 1st 2007, the importation of galena and the lead ore concentrate will enjoy the favorable policy intended for associated gold deposits, i.e. the value-added tax for gold component in the imported galena and lead ore concentrate is exempted,

  11. Simulating Some Complex Phenomena in Hydrothermal Ore-Forming Processes by Reaction-Diffusion CNN

    Institute of Scientific and Technical Information of China (English)

    Xu Deyi; Yu Chongwen; Bao Zhengyu

    2003-01-01

    Complexity phenomena like dynamic and static patterns, order from disorder, chaos and catastrophe were simulated by the application of 2-D reaction-diffusion CNN of two state variables and two diffusion coefficients transformed from Zhabotinksii model. They revealed somehow the mechanism of hydrothermal ore-forming processes, and answered several questions about the onset of ore forming.

  12. Application of neodymium isotope ratio measurements for the origin assessment of uranium ore concentrates

    NARCIS (Netherlands)

    Krajko, J.; Varga, Z.; Yalcintas, E.; Wallenius, M.; Mayer, K.

    2014-01-01

    A novel procedure has been developed for the measurement of 143Nd/144Nd isotope ratio in various uranium-bearing materials, such as uranium ores and ore concentrates (UOC) in order to evaluate the usefulness and applicability of variations of 143Nd/144Nd isotope ratio for provenance assessment in nu

  13. Reduction of Low-grade Manganese Dioxide Ore Pellets by Biomass Wheat Stalk

    Institute of Scientific and Technical Information of China (English)

    Honglei ZHANG; Guocai ZHU; Hong YAN; Yuna ZHAO; Tiancheng LI; Xiujuan FENG

    2013-01-01

    An investigation on reducing low-grade manganese dioxide ore pellets was carried out by using wheat stalk as reductant.The main impact factors of reduction percent such as particle size,biomass/ore ratio,heating rate,nitrogen flow rate,temperature and time in reduction process were discussed.The morphology and component of manganese dioxide ore particle at different stages were also analyzed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS).The results show the increase of the reduction temperature and time,biomass/ore ratio,and the decrease of particle size,heating rate and nitrogen flow rate can significantly enhance reduction efficiency.The reduction kinetic of the manganese ore is controlled by three-dimensional mass diffusion of gaseous reductive volatiles passing from the surface to the core of the ore particles.The activation energy E and frequency factor A were calculated to be 24.15 kJ.mol-1 and 166 min-1,respectively.Biomass pyrolysis volatiles adsorbed onto the surface of the ore particle leads to serious variation of the microstructures and chemical composition of the manganese ore particles.

  14. Preparation of ore blocks for mine leaching by reagent explosion injection

    Science.gov (United States)

    Shevchenko, YuS

    2017-02-01

    The current drilling-and-blasting operations fail to prepare intact ore body underlying a production horizon for subsequent mining and leaching. It is found that the required preparation quality is possible by means of advanced implementation of ore body discontinuity and filling of the resultant system of joints with active leaching solutions.

  15. Depreciation in Ambient Air Quality in Iron Ore Mining Region of Goa

    Directory of Open Access Journals (Sweden)

    Gurdeep Singh

    2015-04-01

    Full Text Available Goa is one of the most famous international tourist destinations of the world. Export of Iron ore extracted from the midland of Goa is a major economic activity. However, there is a serious concern of air pollution due to iron ore mining activities. In order to assess the impact of mining activities on the environmental regime, the air quality depreciation index was adopted for this study due to its realistic and meaningful presentation of deterioration in ambient air quality. The index had been applied to the ambient air quality monitoring results of thirty four locations in the iron ore mining region of Goa. To envisage upon the deterioration in air quality due to various activities, eight stations were selected around mines, twelve in the buffer zone (within 4 Km radius of the core mining activities and fourteen along the ore transportation routes for monitoring of SPM, PM10, SO2 and NOX. The deterioration of air quality in the iron ore mining region of Goa is clearly apparent as the depreciation in air quality was found < -1 from the most desired value of 0 at all the stations. In general, the air quality was found most depreciated along the ore transportation routes, which is also evidenced by a considerable load of particulate matters observed. This infers that ore transportation is the most devastating activity in the iron ore mining region of Goa and accordingly mitigation plan should be adopted.

  16. Application of natural analog studies to exploration for ore deposits

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, D.L. [Consulting Economic Geologist, Reno, NV (United States)

    1995-09-01

    Natural analogs are viewed as similarities in nature and are routinely utilized by exploration geologists in their search for economic mineral deposits. Ore deposit modeling is undertaken by geologists to direct their exploration activities toward favorable geologic environments and, therefore, successful programs. Two types of modeling are presented: (i) empirical model development based on the study of known ore deposit characteristics, and (ii) concept model development based on theoretical considerations and field observations that suggest a new deposit type, not known to exist in nature, may exist and justifies an exploration program. Key elements that are important in empirical model development are described, and examples of successful applications of these natural analogs to exploration are presented. A classical example of successful concept model development, the discovery of the McLaughlin gold mine in California, is presented. The utilization of natural analogs is an important facet of mineral exploration. Natural analogs guide explorationists in their search for new discoveries, increase the probability of success, and may decrease overall exploration expenditure.

  17. Phytostabilization of iron ore tailings through Calophyllum inophyllum L.

    Science.gov (United States)

    Chaturvedi, Nilima; Dhal, N K; Reddy, Palli Sita Rama

    2012-12-01

    The phytostabilization of waste material generated during mining and processing of iron ore through Calophyllum inophyllum L. have been investigated. Iron ore tailings and its varying composition with garden soil were taken to study plant growth, chlorophyll content and metal uptake pattern of Calophyllum inophyllum L. These studies indicate that 100% survival of plant species was noted in all the treatments without any toxicity symptoms. The increase in growth parameters and chlorophyll content along with the high metal accumulation in plant tissues suggests that Calophyllum inophyllum L. may be a potential tool for phytoremediation. The accumulation of Pb (1662 microgm/gm) and Fe (2313 microgm/gm) was observed to be maximum in the plant tissues followed by Cu, Zn, Cr, and Ni. The TF values for most of the heavy metals was observed to be > 1 which indicates that the plant can efficiently translocate these toxic metals to its above ground parts. Removal of more than 30% of the most of the heavy metal like Fe, Pb, and Cu & Zn has been observed in all the treatments during one year of observation. The overall study clearly suggests that the plant can be used as an efficient tool for restoration of mining wastes and other similarly contaminated sites.

  18. Analyzing the international exergy flow network of ferrous metal ores.

    Science.gov (United States)

    Qi, Hai; An, Haizhong; Hao, Xiaoqing; Zhong, Weiqiong; Zhang, Yanbing

    2014-01-01

    This paper employs an un-weighted and weighted exergy network to study the properties of ferrous metal ores in countries worldwide and their evolution from 2002 to 2012. We find that there are few countries controlling most of the ferrous metal ore exports in terms of exergy and that the entire exergy flow network is becoming more heterogeneous though the addition of new nodes. The increasing of the average clustering coefficient indicates that the formation of an international exergy flow system and regional integration is improving. When we contrast the average out strength of exergy and the average out strength of currency, we find both similarities and differences. Prices are affected largely by human factors; thus, the growth rate of the average out strength of currency has fluctuated acutely in the eleven years from 2002 to 2012. Exergy is defined as the maximum work that can be extracted from a system and can reflect the true cost in the world, and this parameter fluctuates much less. Performing an analysis based on the two aspects of exergy and currency, we find that the network is becoming uneven.

  19. Analyzing the International Exergy Flow Network of Ferrous Metal Ores

    Science.gov (United States)

    Qi, Hai; An, Haizhong; Hao, Xiaoqing; Zhong, Weiqiong; Zhang, Yanbing

    2014-01-01

    This paper employs an un-weighted and weighted exergy network to study the properties of ferrous metal ores in countries worldwide and their evolution from 2002 to 2012. We find that there are few countries controlling most of the ferrous metal ore exports in terms of exergy and that the entire exergy flow network is becoming more heterogeneous though the addition of new nodes. The increasing of the average clustering coefficient indicates that the formation of an international exergy flow system and regional integration is improving. When we contrast the average out strength of exergy and the average out strength of currency, we find both similarities and differences. Prices are affected largely by human factors; thus, the growth rate of the average out strength of currency has fluctuated acutely in the eleven years from 2002 to 2012. Exergy is defined as the maximum work that can be extracted from a system and can reflect the true cost in the world, and this parameter fluctuates much less. Performing an analysis based on the two aspects of exergy and currency, we find that the network is becoming uneven. PMID:25188407

  20. Oxygen Carrier Aided Combustion (OCAC of Wood Chips in a Semi-Commercial Circulating Fluidized Bed Boiler Using Manganese Ore as Bed Material

    Directory of Open Access Journals (Sweden)

    Magnus Rydén

    2016-11-01

    Full Text Available Oxygen Carrier Aided Combustion (OCAC is realized by using an active oxygen-carrying bed material in fluidized bed boilers. The active material is reduced in fuel rich parts of the boiler and oxidized in air rich parts. Advantages could be achieved such as new mechanisms for oxygen transport in space and time. Here calcined manganese ore has been used as active bed material in a 12 MWth circulating fluidized bed boiler. The fuel was wood chips and the campaign lasted more than two weeks. From an operational point of view, manganese ore worked excellently. From the temperature profile of the boiler it can be concluded that fuel conversion was facilitated, especially in the dense bottom bed. The effect did not always translate to reduced emissions, which suggests that final combustion in the cyclone outlet was also influenced. Substituting 10% of the sand bed with manganese ore made it possible to reduce the air to fuel ratio without generating large amounts of CO. The use of 100% manganese ore resulted in higher emissions of CO than the sand reference, but, when combined sulphur feeding, dramatic reductions in CO emissions, up to 90% compared to sand reference, was achieved.

  1. 红土镍矿冶炼镍硬铸铁试验%LATERITE NICKEL ORE SMELTING HARD CAST IRON TEST

    Institute of Scientific and Technical Information of China (English)

    戴传智; 韦江林; 刘泽; 陆遥遥

    2015-01-01

    为实现最终产品工艺的节能减排,在150 kW单相矿热炉中进行红土镍矿和铬矿直接生产镍硬Ⅳ型铸铁,产品含Ni 5.89%和Cr 8.96%,符合镍硬Ⅳ型铸铁的成分要求,可达到试验预期效果。因此,利用红土镍矿、铬矿通过矿热炉冶炼一步法生产镍硬Ⅳ型铸铁在技术上是可行的。%In order to achieve the energy saving and emission reduction of the final product process, Ⅳ Ni-hard cast iron is produced with lateritic nickel ore and chrome ore in 150 kW single phase submerged arc furnace and gets a Ni 5.89%and Cr 8.96% product, which fulfills the request of composition and can achieve the desired effect. It is feasible in technic of producingⅣNi-hard cast iron with lateritic nickel ore and chrome ore by one-step method.

  2. Fluid mixing as the mechanism of formation of the Dajing Cu-Sn-Ag-Pb-Zn ore deposit, Inner Mongolia--Fluid inclusion and stable isotope evidence

    Institute of Scientific and Technical Information of China (English)

    刘伟; 李新俊; 谭骏

    2003-01-01

    Dajing Cu-Sn-Ag-Pb-Zn ore deposit, in the Inner Mongolia Autonomous Region of China, is a fissure-filling hydrothermal ore deposit. The δD values of quartz-hosted inclusion water are centered at -100‰ - -130‰. Theδ34S values of sulfide ore minerals andδ13C values of carbonate gangue minerals vary from -0.3‰ to 2.6‰ and from -2.9‰ to -7.0‰, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric-derived groundwater, and sulfur and carbon species from hypogene magma. Linear trends are exhibited on the gaseous H2O versus CO2 plot, and plots of CO, N2, CH4, and C2H6. It is shown by quantitative simulation that magma degassing cannot explain the linear trends. Hence, these linear trends are interpreted in terms of mixing of CO2-rich magmatic fluid with meteoric-derived groundwater. The groundwater circulated in Paleozoic sedimentary rocks and absorbed CO, N2, CH4, C2H6 and radiogenic Ar from organic matter. Cooling effects resulting from mixing have caused the precipitation of ore minerals.

  3. Coupled heat and fluid flow modeling of the Carboniferous Kuna Basin, Alaska: Implications for the genesis of the Red Dog Pb-Zn-Ag-Ba ore district

    Science.gov (United States)

    Garven, G.; Raffensperger, J.P.; Dumoulin, J.A.; Bradley, D.A.; Young, L.E.; Kelley, K.D.; Leach, D.L.

    2003-01-01

    The Red Dog deposit is a giant 175 Mton (16% Zn, 5% Pb), shale-hosted Pb-Zn-Ag-Ba ore district situated in the Carboniferous Kuna Basin, Western Brooks Range, Alaska. These SEDEX-type ores are thought to have formed in calcareous turbidites and black mudstone at elevated sub-seafloor temperatures (120-150??C) within a hydrogeologic framework of submarine convection that was structurally organized by large normal faults. The theory for modeling brine migration and heat transport in the Kuna Basin is discussed with application to evaluating flow patterns and heat transport in faulted rift basins and the effects of buoyancy-driven free convection on reactive flow and ore genesis. Finite element simulations show that hydrothermal fluid was discharged into the Red Dog subbasin during a period of basin-wide crustal heat flow of 150-160 mW/m2. Basinal brines circulated to depths as great as 1-3 km along multiple normal faults flowed laterally through thick clastic aquifers acquiring metals and heat, and then rapidly ascended a single discharge fault zone at rates ??? 5 m/year to mix with seafloor sulfur and precipitate massive sulfide ores. ?? 2003 Elsevier Science B.V. All rights reserved.

  4. Effects of external atmosphere on the metallization phenomenology of composite pellets containing fines of iron ore and coal; Estudo do efeito da atmosfera gasosa na fenomenologia da metalizacao de pelotas auto-redutoras de minerio de ferro e carbono

    Energy Technology Data Exchange (ETDEWEB)

    D`Abreu, Jose C.; Oliveira, Luiz M.R. de [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil). Dept. de Ciencia dos Materiais e Metalurgia

    1996-12-31

    This work presents the effects of temperature, time and CO/CO{sub 2} ratio on metallization and morphology of metallic iron produced by reduction of composite pellets containing fines of iron and anthracite coal. The experiments were conducted in a temperature range of 950 - 1250 deg C, and maximum time of 60 minutes. On the other hand, mixtures of CO/CO{sub 2}, from 100% CO{sub 2} up to 100% CO, were used in the experiments, conducted in an appropriate electrically heated furnace apparatus. In order to fulfill the objectives, the reduced pellets were chemically analyzed before observed in optical and scanning electronic microscopes and the results presented in graphics of percentage metallization versus . The following main results may be drawn from this work: (a) the type of external atmosphere exert a major influence on the reduction rates and metallization of the composite pellets: (i) when CO is raised in the mixture, there is an increase in metallization and reaction rate and the metallization continue unchanged; (ii) and uniform internal reduction mechanism occurs. (b) when CO is decreased in CO-CO{sub 2} mixture, the reduction led to a superficial metallic layer, the metallization, initially high, drops and a topochemical mechanism of re-oxidation occurs. (c) the scanning electronic microscopy allowed to observe that calcium is always present in the root of whiskers. (author) 4 refs., 4 figs., 4 tabs.

  5. Geology and ore fluid geochemistry of the Jinduicheng porphyry molybdenum deposit, East Qinling, China

    Science.gov (United States)

    Li, Hongying; Ye, Huishou; Wang, Xiaoxia; Yang, Lei; Wang, Xiuyuan

    2014-01-01

    Jinduicheng deposit is a giant Mesozoic porphyry Mo system deposit in the East Qinling molybdenum belt, Shaanxi Province, China. The mineralization is associated with the I-type Jinduicheng granite porphyry. Both the porphyry stock and country rocks underwent intense hydrothermal alteration. The alteration, with increasing distance from the parent intrusion, changes from silicification, through potassic and phyllic assemblages, carbonation, to propylitic assemblages. Molybdenite, the dominant ore mineral, occurs in veinlets, most of which are hosted by the altered country rocks, with less than 25% of the ore in the porphyry body. The hydrothermal system comprises four stages, including pre-ore quartz and K-feldspar; two ore stages of quartz, K-feldspar, molybdenite, and Pb- And Zn-bearing sulfides; and post-ore quartz and carbonate. Six main types of primary fluid inclusions are present in hydrothermal quartz, including two-phase aqueous, one-phase aqueous, three-phase CO2-bearing, CO2-dominated fluid inclusions, gas inclusions, and melt inclusions. The homogenization temperatures of fluid inclusions range from 210 to 290 °C in the pre-ore stage, 150-310 °C in ore stage I, 150-360 °C in the ore stage II, and 195-325 °C in the post-ore stage quartz. Estimated salinities of the ore-forming fluids range from 6.9 to 13.5, 4.3 to 12.3, 6.2 to 12.4, and 3.4 to 9.9 wt.% NaCl equiv. in stages 1-4, respectively. The δ34S values of pyrite in the two ore stages range from 2.8‰ to 4.3‰, whereas the δ34S values of molybdenite range from 2.9‰ to 6.2‰. The data suggest both magmatic and crustal sources of sulfur. The δD and δ18O values for the hydrothermal fluids are -57.2‰ to -84.4‰ and 8.0‰ to -3.2‰, respectively. The fluid inclusion and stable data indicate that the pre-ore hydrothermal fluids were mostly of magmatic origin, but the fluids responsible for ore deposition were mixed magmatic and meteoric, and eventually meteoric water dominated the system

  6. LIFETIME PREDICTION FOR MODEL 9975 O-RINGS IN KAMS

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, E.; Skidmore, E.

    2009-11-24

    The Savannah River Site (SRS) is currently storing plutonium materials in the K-Area Materials Storage (KAMS) facility. The materials are packaged per the DOE 3013 Standard and transported and stored in KAMS in Model 9975 shipping packages, which include double containment vessels sealed with dual O-rings made of Parker Seals compound V0835-75 (based on Viton{reg_sign} GLT). The outer O-ring of each containment vessel is credited for leaktight containment per ANSI N14.5. O-ring service life depends on many factors, including the failure criterion, environmental conditions, overall design, fabrication quality and assembly practices. A preliminary life prediction model has been developed for the V0835-75 O-rings in KAMS. The conservative model is based primarily on long-term compression stress relaxation (CSR) experiments and Arrhenius accelerated-aging methodology. For model development purposes, seal lifetime is defined as a 90% loss of measurable sealing force. Thus far, CSR experiments have only reached this target level of degradation at temperatures {ge} 300 F. At lower temperatures, relaxation values are more tolerable. Using time-temperature superposition principles, the conservative model predicts a service life of approximately 20-25 years at a constant seal temperature of 175 F. This represents a maximum payload package at a constant ambient temperature of 104 F, the highest recorded in KAMS to date. This is considered a highly conservative value as such ambient temperatures are only reached on occasion and for short durations. The presence of fiberboard in the package minimizes the impact of such temperature swings, with many hours to several days required for seal temperatures to respond proportionately. At 85 F ambient, a more realistic but still conservative value, bounding seal temperatures are reduced to {approx}158 F, with an estimated seal lifetime of {approx}35-45 years. The actual service life for O-rings in a maximum wattage package likely lies

  7. Effects of Water-bincler Ratio on Strength of Concrete With Iron Ore Tailings%水胶比对铁尾矿混凝土强度的影响

    Institute of Scientific and Technical Information of China (English)

    崔孝炜; 倪文; 吴辉

    2011-01-01

    Ansteel Qidashan iron tailings with slag,natural gypsum and cement clinker are mixed, and produced ce-mentitious materials. And then the cementitious materials are mixed with original tailing,and became high-strength concrete materials by adding water-reducing agent. The effects of water cement ratio on the strength of concrete is researched. And the microstructure of hydration products is analyzed by SEM. The experiments indicate that,with the water-bincler ratio increases,the fluidity of concrete is also increased, but the flexural strength and compressive strength have shown a gradual decreasing trend. With actual production needs, making with Qidashan iron tailings, the suitable concrete water cement ratio is 0.24.%将鞍钢齐大山铁矿尾矿与高炉矿渣、水泥熟料、脱硫石膏进行3级混磨,形成胶凝材料,然后将胶凝材料与作为骨料的原始粒级铁尾矿混合,并加入减水剂制备成无粗骨料的高强混凝土材料.研究了水胶比对混凝土强度的影响,并通过SEM对水化产物及微观结构进行了分析.试验结果表明,随着水胶比的增大,混凝土的流动度也增大,但抗折强度和抗压强度均呈现下降趋势;结合实际生产需要,利用齐大山铁尾矿制备混凝土最合适的水胶比为0.24.

  8. Isotopic tracing of ore-forming source materials for Dexing porphyry copper deposit of Jiangxi, China

    Institute of Scientific and Technical Information of China (English)

    Peng QIAN; Jianjun LU

    2008-01-01

    Dexing copper deposit is the biggest porphyry copper deposit in China. By researching isotopes of C,Si and Cu from the samples of Tongchang and Fujiawu ore-field, the authors found that δ13CPDB values of siderite were close to the δ13CPDB value of original magma; δ30Si values of the samples at the ore-forming stage were close to the δ30Si value range of magma, δ30Si values of partial samples were far away from it; Cu isotopic compositions of massive chalcopyrite formed at the early ore-forming stage are higher than that of veinal chalcopyrite formed at the later ore-forming stage. The results show that ore-forming materials were mainly derived from the porphyry body, and part of them were from wall rock materials.

  9. Iron ore tailings used for the preparation of cementitious material by compound thermal activation

    Institute of Scientific and Technical Information of China (English)

    Zhong-lai Yi; Heng-hu Sun; Xiu-quan Wei; Chao Li

    2009-01-01

    In the background of little reuse and large stockpile for iron ore railings, iron ore tailing from Chinese Tonghua were used as raw material to prepare cementitious materials. Cementitious properties of the iron ore tailings activated by compound thermal ac-tivation were studied. Testing methods, such as XRD, TG-DTA, and IR were used for researching the phase and structure variety of the iron ore tailings in the process of compound thermal activation. The results reveal that a new cementitious material that contains 30wt% of the iron ore tailings can be obtained by compounded thermal activation, whose mortar strength can come up to the stan-dard of 42.5 cement of China.

  10. Genetic characteristics of fluid inclusions in sphalerite from the Silesian-Cracow ores, Poland

    Science.gov (United States)

    Kozlowski, A.; Leach, D.L.; Viets, J.G.

    1996-01-01

    Fluid inclusion studies in sphalerite from early-stage Zn-Pb mineralization in the Silesian-Cracow region (southern Poland), yielded homogenization temperatures (Th) from 80 to 158??C. Vertical thermal gradient of the parent fluids was 6 to 10??C, and the ore crystallization temperature ranges varied from recrystallization of ores, and Th distribution in single fissure fillings were considered. The ore-forming fluids were liquid-hydrocarbon-bearing aqueous solutions of Na-Ca-Cl type with lower Ca contents in the south and higher Ca contents in the north of the region. The ore-forming fluids had salinities from nul to about 23 weight percent of NaCl equivalent. Three types of fluids were recognized, that mixed during ore precipitation: a) ascending fluids of low-to-moderate salinity and high, b) formation brines of high salinity and moderate Th, and c) descending waters of low salinity and low-to-moderate Th.

  11. Butyl rubber O-ring seals: Revision of test procedures for stockpile materials

    Energy Technology Data Exchange (ETDEWEB)

    Domeier, L.A.; Wagter, K.R.

    1996-12-01

    Extensive testing showed little correlation between test slab and O-ring performance. New procedures, comparable to those used with the traditional test slabs, were defined for hardness, compression set, and tensile property testing on sacrificial O-ring specimens. Changes in target performance values were made as needed and were, in one case, tightened to reflect the O-ring performance data. An additional study was carried out on O-ring and slab performance vs cure cycle and showed little sensitivity of material performance to large changes in curing time. Aging and spectra of certain materials indicated that two sets of test slabs from current vendor were accidently made from EPDM rather than butyl rubber. Random testing found no O-rings made from EPDM. As a result, and additional spectroscope test will be added to the product acceptance procedures to verify the type of rubber compound used.

  12. Thermodynamic Analysis of the Selective Reduction of a Nickeliferous Limonitic Laterite Ore by Hydrogen

    Science.gov (United States)

    Elliott, R.; Pickles, C. A.

    2017-09-01

    Nickeliferous limonitic laterite ores are becoming increasingly attractive as a source of metallic nickel as the costs associated with recovering nickel from the sulphide ores increase. Unlike the sulphide ores, however, the laterite ores are not amenable to concentration by conventional mineral processing techniques such as froth flotation. One potential concentrating method would be the pyrometallurgical solid state reduction of the nickeliferous limonitic ores at relatively low temperatures, followed by beneficiation via magnetic separation. A number of reductants can be utilized in the reduction step, and in this research, a thermodynamic model has been developed to investigate the reduction of a nickeliferous limonitic laterite by hydrogen. The nickel recovery to the ferronickel phase was predicted to be greater than 95 % at temperatures of 673-873 K. Reductant additions above the stoichiometric requirement resulted in high recoveries over a wider temperature range, but the nickel grade of the ferronickel decreased.

  13. Genesis and formation conditions of deposits in the unique Strel'tsovka Molybdenum-Uranium ore field: New mineralogical, geochemical, and physicochemical evidence

    Science.gov (United States)

    Aleshin, A. P.; Velichkin, V. I.; Krylova, T. L.

    2007-10-01

    The ambiguity of genetic interpretations of uranium ore formation at Mo-U deposits of the Strel’tsovka ore field led us to perform additional geochemical, mineralogical, and thermobarogeochemical studies. As a result, it has been established that closely related U and F were progressively gained in the Late Mesozoic volcanic rocks from the older basic volcanics (170 Ma) to the younger silicic igneous rocks (140 Ma). The Early Cretaceous postmagmatic hydrothermal epoch (140-125 Ma) is subdivided into preore, uranium ore, and first and second postore stages. The primary brannerite-pitchblende ore was formed in association with fluorite. At the first postore stage, this assemblage was replaced by a U-Si metagel, which was previously identified as coffinite. The metagel shows a wide compositional variation; its fine structure has been studied. The preore metasomatic alteration and related veined mineralization were formed under the effect of sodium (bicarbonate)-chloride solution at a temperature of 250-200°C. The uranium ore formation began with albitization and hematitization of rocks affected by supercritical fluid at 530-500°C; brannerite and pitchblende precipitated at 350-300°C. The chondrite-normalized REE patterns of pitchblende hosted in trachybasalt, trachydacite, and granite demonstrate a pronounced Sm-Nd discontinuity and a statistically significant tetrad effect of W type. These attributes were not established in REE patterns of rhyolites derived from the upper crustal magma chamber. This circumstance and a chronological gap of 5 Ma between silicic volcanism and ore formation do not allow us to suggest that uranium was derived from this magma chamber. According to the proposed model, the evolved silicic Li-F magma was a source of uranium. U4+, together with REE, was fractionated into the fluid phase as complex fluoride compounds. The uranium mineralization was deposited at a temperature barrier. It is suggested that hydromica alteration and the

  14. Photosynthesis and oxidative stress in the restinga plant species Eugenia uniflora L. exposed to simulated acid rain and iron ore dust deposition: Potential use in environmental risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rust Neves, Natalia; Oliva, Marco Antonio; Cruz Centeno, Danilo da; Costa, Alan Carlos; Ferreira Ribas, Rogerio [Departamento de Biologia Vegetal, Universidade Federal de Vicosa, Av. PH Rolfs, Campus, Vicosa, Minas Gerais, 36570-000 (Brazil); Gusmao Pereira, Eduardo, E-mail: egpereira@gmail.com [Departamento de Biologia Vegetal, Universidade Federal de Vicosa, Av. PH Rolfs, Campus, Vicosa, Minas Gerais, 36570-000 (Brazil)

    2009-06-01

    The Brazilian sandy coastal plain named restinga is frequently subjected to particulate and gaseous emissions from iron ore factories. These gases may come into contact with atmospheric moisture and produce acid rain. The effects of the acid rain on vegetation, combined with iron excess in the soil, can lead to the disappearance of sensitive species and decrease restinga biodiversity. The effects of iron ore dust deposition and simulated acid rain on photosynthesis and on antioxidant enzymes were investigated in Eugenia uniflora, a representative shrub species of the restinga. This study aimed to determine the possible utility of this species in environmental risk assessment. After the application of iron ore dust as iron solid particulate matter (SPM{sub Fe}) and simulated acid rain (pH 3.1), the 18-month old plants displayed brown spots and necrosis, typical symptoms of iron toxicity and injuries caused by acid rain, respectively. The acidity of the rain intensified leaf iron accumulation, which reached phytotoxic levels, mainly in plants exposed to iron ore dust. These plants showed the lowest values for net photosynthesis, stomatal conductance, transpiration, chlorophyll a content and electron transport rate through photosystem II (PSII). Catalase and superoxide dismutase activities were decreased by simulated acid rain. Peroxidase activity and membrane injury increased following exposure to acid rain and simultaneous SPM{sub Fe} application. Eugenia uniflora exhibited impaired photosynthetic and antioxidative metabolism in response to combined iron and acid rain stresses. This species could become a valuable tool in environmental risk assessment in restinga areas near iron ore pelletizing factories. Non-invasive evaluations of visual injuries, photosynthesis and chlorophyll a fluorescence, as well as invasive biochemical analysis could be used as markers.

  15. Photosynthesis and oxidative stress in the restinga plant species Eugenia uniflora L. exposed to simulated acid rain and iron ore dust deposition: potential use in environmental risk assessment.

    Science.gov (United States)

    Neves, Natália Rust; Oliva, Marco Antonio; da Cruz Centeno, Danilo; Costa, Alan Carlos; Ribas, Rogério Ferreira; Pereira, Eduardo Gusmão

    2009-06-01

    The Brazilian sandy coastal plain named restinga is frequently subjected to particulate and gaseous emissions from iron ore factories. These gases may come into contact with atmospheric moisture and produce acid rain. The effects of the acid rain on vegetation, combined with iron excess in the soil, can lead to the disappearance of sensitive species and decrease restinga biodiversity. The effects of iron ore dust deposition and simulated acid rain on photosynthesis and on antioxidant enzymes were investigated in Eugenia uniflora, a representative shrub species of the restinga. This study aimed to determine the possible utility of this species in environmental risk assessment. After the application of iron ore dust as iron solid particulate matter (SPM(Fe)) and simulated acid rain (pH 3.1), the 18-month old plants displayed brown spots and necrosis, typical symptoms of iron toxicity and injuries caused by acid rain, respectively. The acidity of the rain intensified leaf iron accumulation, which reached phytotoxic levels, mainly in plants exposed to iron ore dust. These plants showed the lowest values for net photosynthesis, stomatal conductance, transpiration, chlorophyll a content and electron transport rate through photosystem II (PSII). Catalase and superoxide dismutase activities were decreased by simulated acid rain. Peroxidase activity and membrane injury increased following exposure to acid rain and simultaneous SPM(Fe) application. Eugenia uniflora exhibited impaired photosynthetic and antioxidative metabolism in response to combined iron and acid rain stresses. This species could become a valuable tool in environmental risk assessment in restinga areas near iron ore pelletizing factories. Non-invasive evaluations of visual injuries, photosynthesis and chlorophyll a fluorescence, as well as invasive biochemical analysis could be used as markers.

  16. Influences of silver sulfide on the bioleaching of chalcopyrite, pyrite and chalcopyrite-containing ore

    Institute of Scientific and Technical Information of China (English)

    胡岳华; 王军; 邱冠周; 王淀佐

    2002-01-01

    The effects of silver sulfide (Ag2S) on the bioleaching of chalcopyrite and pyrite were investigated in this paper. It has been shown that Ag2S enhanced the yields of bioleaching of chalcopyrite but inhibited the bio-oxidation of pyrite. The addition of Ag2S selectively increased the copper dissolution from the chalcopyrite-containing ores in shake flasks with a recovery of 85.3% compared with 24.3% without Ag2S, while slightly decreased the iron yields from 51% to 41.8%. The copper extraction of the chalcoopyrite-containing waste rock in column leaching charged with 18 kg mass increased up to 21.7% in the presence of Ag2S, while only 3.4% in the absence of the catalyst. The mechanism of Ag2S catalysis could be explained well by the "Mixed potential model".

  17. Robotic complex for the development of thick steeply-inclined coal seams and ore deposits

    Science.gov (United States)

    Nikitenko, M. S.; Malakhov, Yu V.; Neogi, Biswarup; Chakraborty, Pritam; Banerjee, Dipesu

    2017-09-01

    Proposal for the formulation of robotic complexes for steeply inclined coal seams as a basis of the supportive-enclosing walking module and power support with a controlled outlet for mining industry has been represented in this literature. In mining industry, the available resource base reserves and mineral deposits are concentrated deep down the earth crust leading towards a complicated geological condition i.e. abrupt ore bedding and steeply inclined strata with the high gas content and fire hazard of thick coal stratum, heading against an unfavorable and sometimes human labor life risk during subversive mining. Prevailing towards the development of effective robotic complexes based on the means of “unmanned technologies” for extraction of minerals from hard-to-reach deposits and make sure the safety of underground staff during sublevel mining technology.

  18. Removal of Pb ion from water samples using red mud (bauxite ore processing waste

    Directory of Open Access Journals (Sweden)

    Ghorbani A.

    2014-07-01

    Full Text Available This work presented the use of red mud (bauxite ore processing waste in removal of lead ions in water samples. For this 0.1 g of red mud has been used as adsorbent which suspended in 10 ml of lead solution with the concentration of 50 mg l-1 for about 1 h. After that the lead concentration in the samples taken from the red mud treated lead solution measured with atomic absorption spectroscopy (AAS. The effect of some parameter which is important in adsorption of lead on red mud such as suitable adsorbent dosage, pH and contact time of solution and adsorbent was investigated. The result shows that red mud as solid waste and low-cost adsorbent can be successfully used for the removal of lead ion from aqueous solution.

  19. Hybrid intelligent control of combustion process for ore-roasting furnace

    Institute of Scientific and Technical Information of China (English)

    Aijun YAN; Tianyou CHAI; Fenghua WU; Pu WANG

    2008-01-01

    Because of its synthetic and complex characteristics, the combustion process of the shaft ore-roasting furnace is very difficult to control stably. A hybrid intelligent control approach is developed which consists of two systems: one is a cascade fuzzy control system with a temperature soft-sensor, and the other is a ratio control system for air flow with a compensation model for heating gas flow and air-fuel ratio. This approach combined intelligent control, soft-sensing and fault diagnosis with conventional control. It can adjust both the heating gas flow and the air-fuel ratio in real time. By this way, the difficulty of online measurement of the furnace temperature is solved, the fault ratios during combustion process is decreased, the steady control of the furnace temperature is achieved, and the gas consumption is reduced. The successful application in shaft furnaces of a mineral processing plant in China indicates its effectiveness.

  20. Role of minerals properties on leaching process of weathered crust elution-deposited rare earth ore

    Institute of Scientific and Technical Information of China (English)

    肖燕飞; 刘向生; 冯宗玉; 黄小卫; 黄莉; 陈迎迎; 吴文远

    2015-01-01

    Granite belonged to intrusive rock and volcanic was extrusive rock. There may be many differences in their degree of weathering and mineral chemical composition. The present study investigated the minerals properties and the leaching mechanism of the granitic weathered crust elution-deposited rare earth ore from Longnan Rare Earth Mine area (LN ores) and volcanic weathered crust elution-deposited rare earth ore from Liutang Rare Earth Mine area (LT ores). The X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) were used to characterize the phase of rare earth ores. The particle size distributions and main composition of the ore were also presented in this paper. The leaching mechanisms of two kinds of rare earth ores were analyzed with different kinetics models and could be described by the shrinking-core model. They were all inner diffusion-controlled leaching processes. The leaching equation of the kinetics of the LN ores could be expressed as:4 LN LN 1.096 10 2/3 0.377 8.314 0 2 3=0.1061 (1 ) Tr e tη η×−−− − −, leaching equation of kinetics of LT ores was 3 LT LT 4.640 10 2/3 0.411 8.314 0 32 3=8.33 101 (1 ) Tr e tη η×−− −×− − −. The rare earth leaching rate of LT ores was always lower in the same condition, and it would need more time and more (NH4)2SO4 consump-tion to achieve the same rare earth leaching efficiency, which would lead to more serious ammonia-nitrogen pollution. Therefore, magnesium salt was proposed as the leaching agent to eliminate ammonia-nitrogen pollution and further studies would be taken in the future.

  1. 20 CFR 404.1084 - Gain or loss from disposition of property; capital assets; timber, coal, and iron ore...

    Science.gov (United States)

    2010-04-01

    ...; capital assets; timber, coal, and iron ore; involuntary conversion. 404.1084 Section 404.1084 Employees... from disposition of property; capital assets; timber, coal, and iron ore; involuntary conversion. (a... disposal of iron ore mined in the United States, even if held primarily for sale to customers, if section...

  2. 78 FR 47317 - Ore Knob Mine Superfund Site; Laurel Springs, Ashe County, North Carolina; Notice of Settlement

    Science.gov (United States)

    2013-08-05

    ... AGENCY Ore Knob Mine Superfund Site; Laurel Springs, Ashe County, North Carolina; Notice of Settlement... Protection Agency has entered into a settlement with Herbert N. Francis concerning the Ore Knob Mine... comments by site name ``Ore Knob Mine Superfund Site'' by one of the following methods:...

  3. New observations on the Ni-Co ores of the southern Arburese Variscan district (SW Sardinia, Italy)

    Science.gov (United States)

    Naitza, Stefano; Secchi, Francesco; Oggiano, Giacomo; Cuccuru, Stefano

    2015-04-01

    Among the European Variscan regions, the Arburese district, located in the Paleozoic basement of SW Sardinia (Italy) is remarkable for its metallogenic complexity, and offers good opportunities to investigate time/space and genetic links between post-collisional Variscan intrusive magmatism and mineral deposits. The district hosts a large variety of mineral deposits and occurrences, which include the Pb-Zn (Cu, Ag) mesothermal veins of the Montevecchio Lode System, one of the largest and richest Variscan hydrothermal ore deposit of Europe, now exhausted. Ore deposits are genetically related to the emplacement of the Late Variscan (304±1 Ma) Arbus Pluton, a granitoid composite intrusion ranging from monzogabbroic to granodioritic and to peraluminous leucogranitic rock-types. After more than a century of geological studies in the area, several metallogenic issues are still unresolved; among them, the occurrence in the southern sectors of little known polymetallic Ni-Co-(Pb-Zn-Cu-Ag-Bi) veins, a kind of mineralization quite unusual for the Sardinian basement. These hydrothermal deposits are hosted by very low-grade metamorphic rocks at short distance from the intrusion, where contact effect generate also hornfels. Spatial, structural and textural characters of the hydrothermal system are coherent and in apparent continuity with those of the Montevecchio Lode System. Ni-Co ores are hosted by a system of parallel, 1-2 m thick high-angle veins that discontinuously follow the southwestern and southern contacts of the Arbus Pluton for about 7 km. They constantly dip SSW, sideways with respect to the pluton contact, and show a prevalence of fracture infilling (banded and brecciated) textures, with alternating quartz and siderite bands, cockades and frequent inclusions of wallrock fragments. Wallrocks are usually silicified, bleached and/or sericitized. Systematic studies of ore textures and parageneses from different veins along the system have been performed by standard

  4. How two gravity-gradient inversion methods can be used to reveal different geologic features of ore deposit - A case study from the Quadrilátero Ferrífero (Brazil)

    Science.gov (United States)

    Carlos, Dionísio U.; Uieda, Leonardo; Barbosa, Valeria C. F.

    2016-07-01

    Airborne gravity gradiometry data have been recently used in mining surveys to map the 3D geometry of ore deposits. This task can be achieved by different gravity-gradient inversion methods, many of which use a voxel-based discretization of the Earth's subsurface. To produce a unique and stable solution, an inversion method introduces particular constraints. One constraining inversion introduces a depth-weighting function in the first-order Tikhonov regularization imposing a smoothing on the density-contrast distributions that are not restricted to near-surface regions. Another gravity-gradient inversion, the method of planting anomalous densities, imposes compactness and sharp boundaries on the density-contrast distributions. We used these two inversion methods to invert the airborne gravity-gradient data over the iron-ore deposit at the southern flank of the Gandarela syncline in Quadrilátero Ferrífero (Brazil). Because these methods differ from each other in the particular constraint used, the estimated 3D density-contrast distributions reveal different geologic features of ore deposit. The depth-weighting smoothing inversion reveals variable dip directions along the strike of the retrieved iron-ore body. The planting anomalous density inversion estimates a compact iron-ore mass with a single density contrast, which reveals a variable volume of the iron ore along its strike increasing towards the hinge zone of the Gandarela syncline which is the zone of maximum compression. The combination of the geologic features inferred from each estimate leads to a synergistic effect, revealing that the iron-ore deposit is strongly controlled by the Gandarela syncline.

  5. Formation conditions of high-grade gold-silver ore of epithermal Tikhoe deposit, Russian Northeast

    Science.gov (United States)

    Volkov, A. V.; Kolova, E. E.; Savva, N. E.; Sidorov, A. A.; Prokof'ev, V. Yu.; Ali, A. A.

    2016-09-01

    The Tikhoe epithermal deposit is located in the Okhotsk-Chukotka volcanic belt (OChVB) 250 km northeast of Magadan. Like other deposits belonging to the Ivan'insky volcanic-plutonic depression (VTD), the Tikhoe deposit is characterized by high-grade Au-Ag ore with an average Au grade of 23.13 gpt Au and Au/Ag ratio varying from 1: 1 to 1: 10. The detailed explored Tikhoe-1 orebody is accompanied by a thick (20 m) aureole of argillic alteration. Pyrite is predominant among ore minerals; galena, arsenopyrite, sphalerite, Ag sulfosalts, fahlore, electrum, and küstelite are less abundant. The ore is characterized by abundant Sebearing minerals. Cu-As geochemical specialization is noted for silver minerals. Elevated Se and Fe molar fractions of the main ore minerals are caused by their formation in the near-surface argillic alteration zone. The veins and veinlets of the Tikhoe-1 ore zone formed stepwise at a temperature of 230 to 105°C from Nachloride solution enriched in Mg and Ca cations with increasing salinity. The parameters of the ore-forming fluid correspond to those of epithermal low-sulfidation deposits and assume the formation of high-grade ore under a screening unit of volcanic rocks. In general, the composition of the ore-forming fluid fits the mineralogy and geochemistry of ore at this deposit. The similarity of the ore composition and parameters of the ore-forming fluid between the Tikhoe and Julietta deposits is noteworthy. Meanwhile, differences are mainly related to the lower temperature and fluid salinity at the Julietta deposit with respect to the Tikhoe deposit. The fluid at the Julietta deposit is depleted in most components compared with that at the Tikhoe deposit except for Sb, Cd, and Ag. The results testify to a different erosion level at the deposits as derivatives of the same ore-forming system. The large scale of the latter allows us to predict the discovery of new high-grade objects, including hidden mineralization, which is not exposed at

  6. Effect of MgO and Al2O3 on liquid phase formation in the sintering process of iron ore powder%MgO 和 Al2O3对铁矿粉烧结液相生成的影响

    Institute of Scientific and Technical Information of China (English)

    邓涛; 曹雪洋; 王建超

    2015-01-01

    为阐述烧结过程熔融机制和成矿机制,明确 MgO、Al2 O3质量分数对烧结液相生成和矿物组成的影响是至关重要的。利用 Factsage 软件计算 Fe2 O3-SiO2-CaO-Al2 O3-MgO 体系的液相生成,计算氧分压在500 Pa 时,不同温度,不同 MgO、Al2 O3质量分数下体系液相生成和液相区分布的影响。通过烧结试验,分析烧结矿的矿相和矿物成分,结合软件计算得出烧结矿中 MgO 质量分数为2.0%、Al2 O3质量分数为3.0%时其液相量、矿相、矿物成分达到最优适合烧结冶炼的标准。%To illustrate the melting mechanism and mineralization mechanism of sintering process.Making clear the influence of MgO and Al2 O3 content on sintering liquid phase formation and mineral composition is of vital impor-tance.Liquid phase formation of Fe2 O3-SiO2-CaO-Al2 O3-MgO system is calculated by Factsage software.As well as the effect of variation MgO and Al2 O3 content on liquid phase formation and distribution under different tempera-tures at oxygen partial pressure of 500 Pa.Through the sintering experiment,mineral phase and mineral composition of sinter ore are analyzed.The optimal sintering smelting standard for mass fraction of liquid phase,miner phase and mineral composition is concluded with the software calculation when the content of MgO and Al2 O3 is 2.0% and 3.0% in sinter respectively.

  7. Geology and isotopic composition of helium, neon, xenon and metallogenic age of the Jinding and Baiyangping ore deposits, northwest Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    XUE; Chunji(薛春纪); CHEN; Yuchuan(陈毓川); WANG; Denghong(王登红); YANG; Jianmin(杨建民); YANG; Weiguang(杨伟光); ZENG; Rong(曾; 荣)

    2003-01-01

    Both the Jinding and Baiyangping ore deposits developed in the Lanping basin, which is a Mesozoic-Cenozoic terrestrial clastic sedimentary basin. Their occurrences can easily lead many people to compare them with the Pb-Zn deposit hosted in sedimentary rocks, such as Mississippian Valley-, Sedex- and sandstone-type Pb-Zn deposits. However, the Lanping basin developed in the settings of strong tectonic activity of the continental crust, which could cause an effective material exchange between the lower crust and the upper mantle. The orebodies are clearly tectonically controlled without syngenetic features, which probably represents a new type of the sedimentary rock-hosted Pb-Zn deposit. The isotopic compositions of noble gases in ore-forming fluids indicate that 2%-32% of helium (3He/4He = 0.19 Ra-1.97 Ra) is derived from the mantle, 50.1% of neon (20Ne/22Ne = 10.45-10.83; 21Ne/22Ne = 0.03) from the mantle, and considerable amount of xenon (129Xe/130Xe = 5.84-6.86; 134Xe/130Xe = 2.26-2.71) from the mantle, which show that mantle fluids played an important role in the ore formation. The ore-forming age of 67-60 Ma obtained by Re-Os and 40Ar-39Ar dating methods is later than the host rock, which is coeval with the Himalayan alkali magmatism of the mantle source and mantle-crust source. In this paper, the mineralization of the Jinding and Baiyangping ore deposits is considered to be related to the mantle fluids which move upward with the magma or along the deep faults, and mix with the meteoritic brine in the crust to result in large-scale deposition.

  8. Variations in the uranium isotopic compositions of uranium ores from different types of uranium deposits

    Science.gov (United States)

    Uvarova, Yulia A.; Kyser, T. Kurt; Geagea, Majdi Lahd; Chipley, Don

    2014-12-01

    Variations in 238U/235U and 234U/238U ratios were measured in uranium minerals from a spectrum of uranium deposit types, as well as diagenetic phosphates in uranium-rich basins and peraluminous rhyolites and associated autunite mineralisation from Macusani Meseta, Peru. Mean δ238U values of uranium minerals relative to NBL CRM 112-A are 0.02‰ for metasomatic deposits, 0.16‰ for intrusive, 0.18‰ for calcrete, 0.18‰ for volcanic, 0.29‰ for quartz-pebble conglomerate, 0.29‰ for sandstone-hosted, 0.44‰ for unconformity-type, and 0.56‰ for vein, with a total range in δ238U values from -0.30‰ to 1.52‰. Uranium mineralisation associated with igneous systems, including low-temperature calcretes that are sourced from U-rich minerals in igneous systems, have low δ238U values of ca. 0.1‰, near those of their igneous sources, whereas uranium minerals in basin-hosted deposits have higher and more variable values. High-grade unconformity-related deposits have δ238U values around 0.2‰, whereas lower grade unconformity-type deposits in the Athabasca, Kombolgie and Otish basins have higher δ238U values. The δ234U values for most samples are around 0‰, in secular equilibrium, but some samples have δ234U values much lower or higher than 0‰ associated with addition or removal of 234U during the past 2.5 Ma. These δ238U and δ234U values suggest that there are at least two different mechanisms responsible for 238U/235U and 234U/238U variations. The 234U/238U disequilibria ratios indicate recent fluid interaction with the uranium minerals and preferential migration of 234U. Fractionation between 235U and 238U is a result of nuclear-field effects with enrichment of 238U in the reduced insoluble species (mostly UO2) and 235U in oxidised mobile species as uranyl ion, UO22+, and its complexes. Therefore, isotopic fractionation effects should be reflected in 238U/235U ratios in uranium ore minerals formed either by reduction of uranium to UO2 or chemical

  9. Kinetics of thermal decomposition of hydrated minerals associated with hematite ore in a fluidized bed reactor

    Science.gov (United States)

    Beuria, P. C.; Biswal, S. K.; Mishra, B. K.; Roy, G. G.

    2017-03-01

    The kinetics of removal of loss on ignition (LOI) by thermal decomposition of hydrated minerals present in natural iron ores (i.e., kaolinite, gibbsite, and goethite) was investigated in a laboratory-scale vertical fluidized bed reactor (FBR) using isothermal methods of kinetic analysis. Experiments in the FBR in batch processes were carried out at different temperatures (300 to 1200°C) and residence time (1 to 30 min) for four different iron ore samples with various LOIs (2.34wt% to 9.83wt%). The operating velocity was maintained in the range from 1.2 to 1.4 times the minimum fluidization velocity ( U mf). We observed that, below a certain critical temperature, the FBR did not effectively reduce the LOI to a desired level even with increased residence time. The results of this study indicate that the LOI level could be reduced by 90% within 1 min of residence time at 1100°C. The kinetics for low-LOI samples (reaction mechanisms in two temperature regimes. At lower temperatures (300 to 700°C), the kinetics is characterized by a lower activation energy (diffusion-controlled physical moisture removal), followed by a higher activation energy (chemically controlled removal of LOI). In the case of high-LOI samples, three different kinetics mechanisms prevail at different temperature regimes. At temperature up to 450°C, diffusion kinetics prevails (removal of physical moisture); at temperature from 450 to 650°C, chemical kinetics dominates during removal of matrix moisture. At temperatures greater than 650°C, nucleation and growth begins to influence the rate of removal of LOI.

  10. Standard practices for sampling uranium-Ore concentrate

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These practices are intended to provide the nuclear industry with procedures for obtaining representative bulk samples from uranium-ore concentrates (UOC) (see Specification C967). 1.2 These practices also provide for obtaining a series of representative secondary samples from the original bulk sample for the determination of moisture and other test purposes, and for the preparation of pulverized analytical samples (see Test Methods C1022). 1.3 These practices consist of a number of alternative procedures for sampling and sample preparation which have been shown to be satisfactory through long experience in the nuclear industry. These procedures are described in the following order. Stage Procedure Section Primary Sampling One-stage falling stream 4 Two-stage falling stream 5 Auger 6 Secondary Sampling Straight-path (reciprocating) 7 Rotating (Vezin) 8, 9 Sample Preparation 10 Concurrent-drying 11-13 Natural moisture 14-16 Calcination 17, 18 Sample Packaging 19 Wax s...

  11. Amalgamated Products of Ore and Quadratic Extensions of Rings

    CERN Document Server

    Johnson, Garrett

    2012-01-01

    We study the ideal theory of amalgamated products of Ore and quadratic extensions over a base ring R. We prove an analogue of the Hilbert Basis theorem for an amalgamated product Q of quadratic extensions and determine conditions for when the one-sided ideals of Q are principal or doubly-generated. We also determine conditions that make Q a principal ideal ring. Finally, we show that the double affine Hecke algebra $H_{q,t}$ associated to the general linear group GL_2(k) (here, k is a field with characteristic not 2) is an amalgamated product of quadratic extensions over a three-dimensional quantum torus and give an explicit isomorphism. In this case, it follows that $H_{q,t}$ is a noetherian ring.

  12. Culturable microorganisms associated with Sishen iron ore and their potential roles in biobeneficiation.

    Science.gov (United States)

    Adeleke, Rasheed; Cloete, T E; Khasa, D P

    2012-03-01

    With one of the largest iron ore deposits in the world, South Africa is recognised to be among the top ten biggest exporters of iron ore. Increasing demand and consumption of this mineral triggered search for processing technologies, which can be utilised to "purify" the low-grade iron ore minerals that contain high levels of unwanted potassium (K) and phosphorus (P). This study investigated a potential biological method that can be further developed for the full biobeneficiation of low-grade iron ore minerals. Twenty-three bacterial strains that belong to Proteobacteria, Firmicutes, Bacteroidetes and Actinobateria were isolated from the iron ore minerals and identified with sequence homology and phylogenetic methods. The abilities of these isolates to lower the pH of the growth medium and solubilisation of tricalcium phosphate were used to screen them as potential mineral solubilisers. Eight isolates were successfully screened with this method and utilised in shake flask experiments using iron ore minerals as sources of K and P. The shake flask experiments revealed that all eight isolates have potentials to produce organic acids that aided the solubilisation of the iron ore minerals. In addition, all eight isolates produced high concentrations of gluconic acid followed by relatively lower concentrations of acetic, citric and propanoic acid. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analyses also indicated extracellular polymeric substances could play a role in mineral solubilisation.

  13. Selective Removal of Iron from Low-Grade Ti Ore by Reacting with Calcium Chloride

    Science.gov (United States)

    Kang, Jungshin; Okabe, Toru H.

    2017-02-01

    Recently, titanium metal production by molten salt electrolysis using CaCl2 as molten salt and TiO2 or rutile (94 to 96 pct TiO2) as feedstock has been drawing attention. However, when a low-grade Ti ore (mainly FeTiO3) is used as feedstock, removal of iron (Fe) from the ore is indispensable. In this study, the influence of reaction temperature, reaction time, particle size of the ore, and source country for the ore on the removal of iron by selective chlorination using CaCl2 was assessed. Experimental results showed that the mass percent of iron in the ore decreased from 49.7 to 1.79 pct under certain conditions by selective removal of iron as FeCl2. As a result, high-grade CaTiO3 was produced when the ore particles smaller than 74 µm reacted with CaCl2 at 1240 K (967 °C) for 8 to 10 hours. Therefore, this study demonstrates that the removal of iron from the ore is feasible through the selective chlorination process using CaCl2 by optimizing the variables.

  14. Strontium isotope geochemistry of the Lemachang independent silver ore deposit, northeastern Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Sr isotope geochemical studies (the 87Sr/86Sr and ?18O-87Sr/86Sr systems) on the wall rocks and ores from the Lemachang independent Ag deposit in northeastern Yunnan provide strong evidence that the ore-forming fluids had flown through radiogenetically Sr-enriched rocks or strata prior to their entry into the locus of ore precipitation, and water-rock interaction is the main mechanism of Ag ore precipitation. The radiogenetically Sr-enriched source region may be the Proterozoic basement (the Kunyang and Hekou groups). Moreover, the theoretical modeling of the Sr isotopic system indicates that the ore-forming fluids contain as much as 3×10?6 Sr with isotopic composition of Sr being 0.750 and that of oxygen 7.0‰. The ore-forming temperatures were estimated at 150-250℃ for the carbonate rock-type ores and at 200-260℃ for the clastic rock-type.

  15. Strontium isotope geochemistry of the Lemachang independent silver ore deposit, northeastern Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    邓海琳; 李朝阳; 涂光炽; 周云满; 王崇武

    2000-01-01

    Sr isotope geochemical studies (the 87Sr/86Sr and δ18O-87Sr/86Sr systems) on the wall rocks and ores from the Lemachang independent Ag deposit in northeastern Yunnan provide strong evidence that the ore-forming fluids had flown through radiogenetically Sr-enriched rocks or strata prior to their entry into the locus of ore precipitation, and water-rock interaction is the main mechanism of Ag ore precipitation. The radiogenetically Sr-enriched source region may be the Proterozoic basement (the Kunyang and Hekou groups). Moreover, the theoretical modeling of the Sr isotopic system indicates that the ore-forming fluids contain as much as 3×10-6 Sr with isotopic composition of Sr being 0.750 and that of oxygen 7.0‰. The ore-forming temperatures were estimated at 150-250℃ for the carbonate rock-type ores and at 200-260℃ for the clastic rock-type.

  16. Selective Removal of Iron from Low-Grade Ti Ore by Reacting with Calcium Chloride

    Science.gov (United States)

    Kang, Jungshin; Okabe, Toru H.

    2016-09-01

    Recently, titanium metal production by molten salt electrolysis using CaCl2 as molten salt and TiO2 or rutile (94 to 96 pct TiO2) as feedstock has been drawing attention. However, when a low-grade Ti ore (mainly FeTiO3) is used as feedstock, removal of iron (Fe) from the ore is indispensable. In this study, the influence of reaction temperature, reaction time, particle size of the ore, and source country for the ore on the removal of iron by selective chlorination using CaCl2 was assessed. Experimental results showed that the mass percent of iron in the ore decreased from 49.7 to 1.79 pct under certain conditions by selective removal of iron as FeCl2. As a result, high-grade CaTiO3 was produced when the ore particles smaller than 74 µm reacted with CaCl2 at 1240 K (967 °C) for 8 to 10 hours. Therefore, this study demonstrates that the removal of iron from the ore is feasible through the selective chlorination process using CaCl2 by optimizing the variables.

  17. Iron-Ore Sintering Process Optimization / Optymalizacja Procesu Aglomeracji Rudy Żelaza

    Directory of Open Access Journals (Sweden)

    Fröhlichová M.

    2015-12-01

    Full Text Available The work deals with examination of the influence of the ratio between iron ore concentrate and iron ore on quality of produced iron ore sinter. One of the possibilities to increase iron content in sinter is the modification of raw materials ratio, when iron ore materials are added into sintering mixture. If the ratio is in favor of iron ore sinter, iron content in resulting sintering mixture will be lower. If the ratio is in favor of iron ore concentrate and recycled materials, which is more finegrained, a proportion of a fraction under 0.5 mm will increase, charge permeability property will be reduced, sintering band performance will decrease and an occurrence of solid particulate matter in product of sintering process will rise. The sintering mixture permeability can be optimized by increase of fuel content in charge or increase of sinter charge moisture. A change in ratio between concentrate and iron ore has been experimentally studied. An influence of sintering mixture grain size composition, a charge grains shape on quality and phase composition on quality of the produced iron sinter has been studied.

  18. STUDY ON BIOLEACHING OF PRIMARY CHALCOPYRITE ORE WITH THERMOACIDOPHLIC ARCHAE

    Institute of Scientific and Technical Information of China (English)

    P. Zou; W.B. Zhang; T. Lei; J.K. Wang

    2006-01-01

    A high temperature-tolerating thermoacidophilic archae (TA) was isolated from water samples collected from a hot sulfur-containing spring in the Yunnan Province, China, and was used in bioleaching experiments of a low-grade chalcopyrite ore. The TA grow at temperatures ranging from 40 to 80℃, with 65℃ being the optimum temperature, and at pH values of 1.5 to 4.0, with an optimum pH value of 2.0. The bioleaching experiments of the chalcopyrite ore were conducted in both laboratory batch bioreactors and leaching columns. The results obtained from the bioreactor experiments showed that the TA bioleaching rate of copper reached 97% for a 12-day leaching period, while the bioleaching rate was 32.43% for thiobacillus ferrooxidans (Tf) leaching for the same leaching time. In the case of column leaching, tests of a two-phase leaching (196 days), that is,a two-month (56 days) Tf leaching in the first phase, followed by a 140-day TA leaching in the second phase were performed. The average leaching rate of copper achieved for the 140-day TA leaching was 195mg/(L· d), while for the control experiments, it was as low as 78mg/(L· d) for the Tf leaching, indicating that the TA possesses a more powerful oxidizing ability to the chalcopyrite than Tf. Therefore, it is suggested that the two-phase leaching process be applied to for the heap leaching operations, whereas, the TA can be used in the second phase when the temperature inside the heap has increased, and the primary copper sulfide minerals have already been partially oxidized with Tf beforehand in the first phase.

  19. A greenhouse trial to investigate the ameliorative properties of biosolids and plants on physicochemical conditions of iron ore tailings: Implications for an iron ore mine site remediation.

    Science.gov (United States)

    Cele, Emmanuel Nkosinathi; Maboeta, Mark

    2016-01-01

    An iron ore mine site in Swaziland is currently (2015) in a derelict state as a consequence of past (1964-1988) and present (2011 - current) iron ore mining operations. In order to control problems associated with mine wastes, the Swaziland Water Services Corporation (SWSC) recently (2013) proposed the application of biosolids in sites degraded by mining operations. It is thought that this practice could generally improve soil conditions and enhance plant reestablishment. More importantly, the SWSC foresees this as a potential solution to the biosolids disposal problems. In order to investigate the effects of biosolids and plants in soil physicochemical conditions of iron mine soils, we conducted two plant growth trials. Trial 1 consisted of tailings that received biosolids and topsoil (TUSB mix) while in trial 2, tailings received biosolids only (TB mix). In the two trials, the application rates of 0 (control), 10, 25, 50, 75 and 100 t ha(-1) were used. After 30 days of equilibration, 25 seeds of Cynodon dactylon were sown in each pot and thinned to 10 plants after 4 weeks. Plants were watered twice weekly and remained under greenhouse conditions for 12 weeks, subsequent to which soils were subjected to chemical analysis. According to the results obtained, there were significant improvements in soil parameters related to fertility such as organic matter (OM), water holding capacity (WHC), cation exchange capacity (CEC), ammonium [Formula: see text] , magnesium (Mg(2+)), calcium (Ca(2+)) and phosphorus ( [Formula: see text] ). With regard to heavy metals, biosolids led to significant increases in soil total concentrations of Cu, Zn, Cd, Hg and Pb. The higher concentrations of Zn and Cu in treated tailings compared to undisturbed adjacent soils are a cause for concern because in the field, this might work against the broader objectives of mine soil remediation, which include the recolonization of reclaimed sites by soil-dwelling organisms. Therefore, while

  20. Numerical Modelling of Ore-forming Dynamics of Fractal Dispersive Fluid Systems

    Institute of Scientific and Technical Information of China (English)

    邓军; 方云; 杨立强; 杨军臣; 孙忠实; 王建平; 丁式江; 王庆飞

    2001-01-01

    Based on an analysis of the fractal structures and mass transport mechanism of typical shear-fluid-ore formation system, the fractal dispersion theory of the fluid system was used in the dynamic study of the ore formation system. The model of point-source diffusive illuviation of the shear-fluid-ore formation system was constructed, and the numerical simulation of dynamics of the ore formation system was finished. The result shows that: (1) The metallogenic system have nested fractal structure. Different fractal dimension values in different systems show unbalance and inhomogeneity of ore-forming processes in the geohistory. It is an important parameter to symbolize the process of remobilization and accumulation of ore-forming materials. Also it can indicate the dynamics of the metallogenic system quantitatively to some extent. (2) In essence, the fractal dispersive ore-forming dynamics is a combination of multi-processes dominated by fluid dynamics and supplemented by molecule dispersion in fluids and fluid-rock interaction. It changes components and physico-chemical properties of primary rocks and fluids, favouring deposition and mineralization of ore-forming materials. (3) Gold ore-forming processes in different types of shear zones are quite different. (1) In a metallogenic system with inhomogeneous volumetric change and inhomogeneous shear, mineralization occurs in structural barriers in the centre of a shear zone and in geochemical barriers in the shear zone near its boundaries. But there is little possibility of mineralization out of the shear zone. (2) As to a metallogenic system with inhomogeneous volumetric change and simple shear, mineralization may occur only in structural barriers near the centre of the shear zone. (3) In a metallogenic system with homogeneous volumetric change and inhomogeneous shear, mineralization may occur in geochemical barriers both within and out of the shear zone.

  1. Determination of gold in copper-bearing sulphide ores and metallurgical flotation products by atomic-absorption spectrometry.

    Science.gov (United States)

    Strong, B; Murray-Smith, R

    1974-12-01

    A method is described which is specific for the determination of gold in sulphide copper ores and concentrates. Direct decomposition with aqua regia was found to be incomplete. A carefully controlled roasting stage followed by treatment with hydrochloric acid and then aqua regia was effective for dissolving all the gold. The gold is extracted into 4-methylpentan-2-one (methyli-sobutylketone) then aspirated into a very lean air-acetylene flame and the gold determined by atomic-absorption spectrometry. No interferences were observed from large concentrations of copper, iron or nickel.

  2. ON SOME KEY GEOLOGICAL PROBLEMS RELATED TO THE LINGLONG-JIAOJIA ORE-CENTRALIZED DISTRICT IN SHANDONG PROVINCE, CHINA

    Institute of Scientific and Technical Information of China (English)

    WANG Jincao; XIA Bin; TANG Jingru

    2003-01-01

    The Lingtong-Jiaojia ore-centralized district is controlled by the tectonic stress field characterized bY the combination of extension and strike-slip, and the dip, dip angle, pitch and pitch angle of the ore bodies are all constrained by the dynamic conditions of the tectonics. The metallotectonic series for the ore-centralized district belong to the type of a combination of extension and strike-slip and can be subdivided into four sub-series. The ore-forming process in the brittle regime can be disintegrated into two stages, i.e., the embryonic fracture stage and the megascopic fracture stage, and ore-forming process is rather common in the ore-centralized district at the former stage. Moreover, several key structural patterns and their features were discussed and a preliminary assessment about the ore-forming prospect in this district was made in the paper.

  3. A study on iron ore transportation model with penalty value of transportation equipment waiting

    Directory of Open Access Journals (Sweden)

    Kailing Pan

    2017-03-01

    Full Text Available As some steel enterprises are at a disadvantage in the choice of the mode of transportation, this paper made further studies of the characteristics of the iron ore logistics, taking comprehensive consideration of optimizing the waiting time under the conditions with limited loading capacity and setting up a procedural model of the iron ore logistics system with minimum cost of transportation, storage, loading, unloading, and transportation equipment waiting. Finally, taking the iron ore transport system of one steel enterprise as example, the solution and the validity of the model were analyzed and verified in this paper.

  4. Da identidade açoriana ao consumo da marca Açores

    OpenAIRE

    Negalha, Raquel Raposo

    2015-01-01

    Dissertação de Mestrado, Sociologia, 24 de Setembro de 2015, Universidade dos Açores. O presente Projeto de Dissertação insere-se na área da sociologia do consumo intitulada Da Identidade Açoriana ao Consumo da Marca Açores. A pertinência da mesma prende-se com o facto de o Projeto “Marca Açores” desenvolvido pela Sociedade para o Desenvolvimento dos Açores (SDEA) ser uma novidade para as empresas que se encontram interessadas em incutir o selo da mesma nos seus produtos de modo a que este...

  5. Application of LANDSAT satellite imagery for iron ore prospecting in the Western Desert of Egypt

    Science.gov (United States)

    Elshazly, E. M.; Abdelhady, M. A.; Elghawaby, M. A.; Khawasik, S. M.

    1977-01-01

    Prospecting for iron ore occurrences was conducted by the Remote Sensing Center in Bahariya Oasis-El Faiyum area covering some 100,000 km squared in the Western Desert of Egypt. LANDSAT-1 satellite images were utilized as the main tool in the regional prospecting of the iron ores. The delineation of the geological units and geological structure through the interpretation of the images corroborated by field observations and structural analysis led to the discovery of new iron ore occurrences in the area of investigation.

  6. Innovative application of mathematical methods in evaluation of ore raw materials for production of iron

    Directory of Open Access Journals (Sweden)

    P. Besta

    2014-01-01

    Full Text Available Current principles of evaluation of ore raw materials are usually based on a comparison of selected isolated criteria. Today‘s sophisticated technological level of blast furnace process requires the introduction of raw material indicators that provide global characteristics of their quality. This can´t be realized with isolated parameters only. The evaluation should incorporate the key characteristics of iron ore and convert them into a uniform evaluation parameter. This article analyzes the use of mathematical methods in the evaluation of the quality of ore raw materials.

  7. AMS of natural 236U and 239Pu produced in uranium ores

    Science.gov (United States)

    Wilcken, K. M.; Barrows, T. T.; Fifield, L. K.; Tims, S. G.; Steier, P.

    2007-06-01

    The rare isotopes 236U and 239Pu are produced naturally by neutron capture in uranium ores. Here we measure 236U and 239Pu by accelerator mass spectrometry (AMS) in the same ore samples for the first time. To ensure efficient extraction of both elements and isotopic equilibrium between the 239Pu in the ore and a 242Pu spike, we developed a new sample preparation protocol. AMS has clear advantages over previous methods because it achieves better discrimination against molecular interferences with higher sensitivity and shorter counting times. Measurements of 236U and 239Pu hold considerable promise as proxy indicators of neutron flux and uranium concentration.

  8. TWO-DIMENSIONAL AXISYMMETRIC MODELING OF COMBUSTION IN AN IRON ORE SINTERING BED

    DEFF Research Database (Denmark)

    Lafmejani, Saeed Sadeghi; Davazdah Emami, Mohsen; Panjehpour, Masoud;

    2013-01-01

    A twodimensional model, based on conservation of mass, momentum and energy equations, is represented in this paper in which the coke combustion process, for iron ore sintering in a packed bed, is simulated numerically. The aforementioned packed bed consists of iron ore, coke, limestone and moisture...... of species are solved numerically by using a computational fluid dynamics code in a discrete solving domain. Modeling of iron ore sintering has complex and various features like coke combustion, complicated physical changes of solid phase particles and different modes of heat transfer, for example convection...

  9. Manufacturing and Application of Metalized Ore-Coal Pellets in Synthetic Pig Iron Smelting

    Science.gov (United States)

    Nokhrina, O. I.; Rozhikhina, I. D.; Khodosov, I. E.

    2016-08-01

    The article presents research data on manufacturing and application of metalized ore-coal pellets in synthetic pig iron smelting. A technology of pellets metallization by means of solid-phase reduction of iron from oxides using hematite-magnetite iron ore and low-caking coal as raw materials is described. Industrial testing of replacing 10, 15, and 20% of waste metal by the metalized ore-coal pellets in the coreless induction furnace IST-1 is described. Optimal temperature and time conditions of feeding the metalized pellets into the furnace in smelting pig iron of SCh-40-60 grade are determined.

  10. Work stressors, job insecurity, union support, job satisfaction and safety outcomes within the iron ore mining environment

    Directory of Open Access Journals (Sweden)

    Nicolaas W.H. Smit

    2016-02-01

    Full Text Available Orientation: The study of work stressors, job insecurity and union support creates opportunity for iron ore mining organisations to manage job satisfaction and safety motivation and behaviour more effectively. Research purpose: The objective of this study was to investigate the relationship between work stressors, job insecurity, union support, job satisfaction and safety motivation and behaviour of a sample of iron ore mine workers in South Africa.Motivation for the study: The mining industry in general is often faced with hazardous and physically demanding working environments, where employees work under constant pressure. Work stressors, job insecurity, union support and job satisfaction are considered key variables when investigating effective means of managing safety.Research design, approach and method: A cross-sectional survey design was utilised to collect the data. A convenience sample of employees in the iron ore mining industry of South Africa (N = 260 were included. Structural equation modelling and bootstrapping resampling analysis were used to analyse the data.Main findings: Work stressors and job insecurity were found to be negatively associated with job satisfaction. Conversely, perceived union support was positively associated with job satisfaction and safety motivation and behaviour. Furthermore, job satisfaction mediated the relationship between union support and safety motivation and behaviour.Practical/managerial implications: Mining organisations can, by placing the focus on reducing work stressors, and promoting job security and union support, achieve higher levels of safety motivation and behaviour through job satisfaction.Contribution/value-add: A great deal of independent research on work stressors, job insecurity, union support, job satisfaction as well as safety motivation and behaviour has already been done. To date, very little empirical research exists that simultaneously considers all these constructs. This study

  11. Sedimentary carbonate-hosted giant Bayan Obo REE-Fe-Nb ore deposit of Inner Mongolia, China; a cornerstone example for giant polymetallic ore deposits of hydrothermal origin

    Science.gov (United States)

    Chao, E.C.T.; Back, J.M.; Minkin, J.A.; Tatsumoto, M.; Junwen, Wang; Conrad, J.E.; McKee, E.H.; Zonglin, Hou; Qingrun, Meng; Shengguang, Huang

    1997-01-01

    Detailed, integrative field and laboratory studies of the textures, structures, chemical characteristics, and isotopically determined ages and signatures of mineralization of the Bayan Obo deposit provided evidence for the origin and characteristics favorable for its formation and parameters necessary for defining giant polymetallic deposits of hydrothermal origin. Bayan Obo is an epigenetic, metasomatic, hydrothermal rare earth element (REE)-Fe-Nb ore deposit that is hosted in the metasedimentary H8 dolostone marble of the Middle Proterozoic Bayan Obo Group. The metasedimentary sequence was deposited on the northern continental slope of the North China craton. The mine area is about 100 km south of the suture marking Caledonian subduction of the Mongolian oceanic plate from the north beneath the North China craton. The mineralogy of the deposit is very complex, consisting of more than 120 different minerals, some of which are epigenetic minerals introduced by hydrothermal solutions, and some of which are primary and secondary metamorphic minerals. The major REE minerals are monazite and bastnaesite, whereas magnetite and hematite are the dominant Fe-ore minerals, and columbite is the most abundant Nb mineral. Dolomite, alkali amphibole, fluorite, barite, aegirine augite, apatite, phlogopite, albite, and microcline are the most widespread gangue minerals. Three general types of ores occur at Bayan Obo: disseminated, banded, and massive ores. Broad zoning of these ore types occurs in the Main and East Orebodies. Disseminated ores are in the outermost zone, banded ores are in the intermediate zone, and massive ores are in the cores of the orebodies. On the basis of field relations, host rocks, textures, structures, and mineral assemblages, many varieties of these three types of ores have been recognized and mapped. Isotopic dating of monazite, bastnaesite, aeschynite, and metamorphic and metasomatic alkali amphiboles associated with the deposit provides constraints

  12. FY2017 status report: Model 9975 O-ring fixture long-term leak performance

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-07-27

    A series of experiments to monitor the aging performance of Viton® GLT and GLT-S O-rings used in the Model 9975 shipping package has been ongoing since 2004 at the Savannah River National Laboratory. One approach has been to periodically evaluate the leak performance of O-rings being aged in mock-up 9975 Primary Containment Vessels (PCVs) at elevated temperature. Other methods such as compression-stress relaxation (CSR) tests and field surveillance are also on-going to evaluate O-ring behavior. Seventy tests using PCV mock-ups with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 ºF. They were leak-tested initially and have been tested periodically to determine if they continue to meet the leak-tightness criterion defined in ANSI standard N14.5-97. Due to material substitution, a smaller test matrix with fourteen additional tests was initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 ºF. Leak test failures have been experienced in all of the GLT O-ring fixtures aging at 350 ºF and higher temperatures, and in 8 fixtures aging at 300 ºF. The 300 °F GLT O-ring fixtures failed after 2.8 to 5.7 years at temperature. The remaining GLT O-ring fixtures aging at 300 ºF were retired from testing following more than 5 years at temperature without failure. No failures have yet been observed in GLT O-ring fixtures aging at 200 ºF for 9 to 10.5 years, or in GLT O-ring fixtures aging at 270 ºF for 5.7 years. These aging temperatures bound O-ring temperatures anticipated during normal storage in K-Area Complex (KAC). Leak test failures have been experienced in all of the GLT-S O-ring fixtures aging at 300 ºF and above. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 and 250 ºF for 6.9 to 7.5 years. Data from the O-ring fixtures are generally consistent with results from compression stress relaxation testing, and provide confidence in the predictive models based on those results

  13. The potential for ore and industrial minerals in the Forsmark area

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsala (Sweden); Isaksson, Hans; Thunehed, Hans [GeoVista AB, Luleaa (Sweden)

    2004-03-01

    A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc

  14. Temporal and spatial distribution of Au-Ag polymetallic ore deposits and source of ore-forming materials in the Zhangjiakou-Xuanhua mantle-branch metallogenetic zone

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Zhangjiakou-Xuanhua area is a mineral resource-concentrated area for gold-silver polymetallic ore deposits. The temporal and spatial distribution and origin of mineral resources have been argued for a long time. Based on the comprehensive studies of geochronology and sulfur, lead, oxygen, carbon and noble gas isotopes, it is considered that the temporal and spatial distribution of mineral resources in this area is obviously controlled by the Zhangjiakou-Xuanhua mantle branch structure, as is reflected by the occurrence of gold deposits in the inner parts and of Ag-Pb-Zn polymetallic ore deposits in the outer parts. The mineralization took place mainly during the Yanshanian period. Ore-forming materials came largely from the deep interior of the Earth, and hydrothermal fluids were derived predominantly from Yanshanian magmatism.

  15. Acidity measurement of iron ore powders using laser-induced breakdown spectroscopy with partial least squares regression.

    Science.gov (United States)

    Hao, Z Q; Li, C M; Shen, M; Yang, X Y; Li, K H; Guo, L B; Li, X Y; Lu, Y F; Zeng, X Y

    2015-03-23

    Laser-induced breakdown spectroscopy (LIBS) with partial least squares regression (PLSR) has been applied to measuring the acidity of iron ore, which can be defined by the concentrations of oxides: CaO, MgO, Al₂O₃, and SiO₂. With the conventional internal standard calibration, it is difficult to establish the calibration curves of CaO, MgO, Al₂O₃, and SiO₂ in iron ore due to the serious matrix effects. PLSR is effective to address this problem due to its excellent performance in compensating the matrix effects. In this work, fifty samples were used to construct the PLSR calibration models for the above-mentioned oxides. These calibration models were validated by the 10-fold cross-validation method with the minimum root-mean-square errors (RMSE). Another ten samples were used as a test set. The acidities were calculated according to the estimated concentrations of CaO, MgO, Al₂O₃, and SiO₂ using the PLSR models. The average relative error (ARE) and RMSE of the acidity achieved 3.65% and 0.0048, respectively, for the test samples.

  16. Pump-lockage ore transportation system for deep sea flexible mining system

    Institute of Scientific and Technical Information of China (English)

    XU Hai-liang; YIN Ping-wei; XU Shao-jun; YANG Fang-qiong

    2008-01-01

    Based on characteristics of deep sea flexible mining system, a new pump-lockage ore transportation system was designed. According to Bernoulli equation and two-phase hydrodynamics theory, parameters of the new system were obtained and four ore transportation systems were analyzed. The results indicate that the pump head of 1000 m mining system is 100-150 m and that of 5 000 m mining system is 660-750 m. In addition, based on similarity theory, a model of the new transportation system was made,which can simulate more than 5 000 m actual ore transportation system. So both theory and experiment prove that the new pump-lockage ore transportation system is an ideal design for deep sea flexible mining system.

  17. REE Characteristics of Microfine Disseminated Gold Ores in Danzai,Guizhou

    Institute of Scientific and Technical Information of China (English)

    陈庆年; 周丕康; 等

    1998-01-01

    Described in this paper are the fundamental characteristics of mineralization of gold ores in the Sandu-Danzhai Hg-Sb-Au ore belt of Guizhou Province,Through systematic sampling of the industrial orebody and alteration zone,the total amount of the rare-earth elements,that of the light rare-earth elements,Eu depletion and other parameters are clarified.There have been distinguished two types of REE distribution patterns:the"Clay type"and the "quartz type" .High-grade orebodies are closely related with silicification,illitization and pyritization.The seven-component diagram of the REEs of even numbers in the periodic table(Bal-asov,1966)is capable of distinguishing ore-bearing from ore-barren deposits.

  18. The study of volume ultrasonic waves propagation in the gas-containing iron ore pulp.

    Science.gov (United States)

    Morkun, V; Morkun, N; Pikilnyak, A

    2015-02-01

    The results of research of the volume ultrasonic waves propagation in the gas-containing iron ore slurry using ultrasonic phased array technology is presented. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Liberation of Oolitic Hematite Grains From Iron Ore,Dilband Mines Pakistan

    Directory of Open Access Journals (Sweden)

    Muhammad Ishaque Abro

    2011-04-01

    Full Text Available Dilband Mine is one of the main iron ore deposits of Balochistan Pakistan, containing about 200milion tones of ore. The Dilband iron ore is mainly composed of oolitic-hematite along with the quartz, calcite, fluorapatite, kaolin, and chlinochlore gangue minerals. The basic objective of the paper is to report the operating conditions of comminuting step where maximum liberation of oolitic hematite from the matrix enriched with calcite and fluorapatite minerals has been possible. Besides this quantitative and qualitative analysis of particles based on concentrate, middlings, and tailings susceptibility of particles is proposed. Comminution circuit for Dilband iron ore is designed on the basis of work index, grade and percent distribution of oolitic-hematite particles in concentrate, middlings and tailings.

  20. SEVENTH INTERIM STATUS REPORT: MODEL 9975 PCV O-RING FIXTURE LONG-TERM LEAK PERFORMANCE

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W.

    2012-08-30

    A series of experiments to monitor the aging performance of Viton® GLT O-rings used in the Model 9975 package has been ongoing since 2004 at the Savannah River National Laboratory. Seventy tests using mock-ups of 9975 Primary Containment Vessels (PCVs) were assembled and heated to temperatures ranging from 200 to 450 ºF. They were leak-tested initially and have been tested periodically to determine if they meet the criterion of leak-tightness defined in ANSI standard N14.5-97. Fourteen additional tests were initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 ºF. High temperature aging continues for 23 GLT O-ring fixtures at 200 – 270 ºF. Room temperature leak test failures have been experienced in all of the GLT O-ring fixtures aging at 350 ºF and higher temperatures, and in 8 fixtures aging at 300 ºF. The remaining GLT O-ring fixtures aging at 300 ºF have been retired from testing following more than 5 years at temperature without failure. No failures have yet been observed in GLT O-ring fixtures aging at 200 ºF for 54-72 months, which is still bounding to O-ring temperatures during storage in K-Area Complex (KAC). Based on expectations that the fixtures aging at 200 ºF will remain leak-tight for a significant period yet to come, 2 additional fixtures began aging in 2011 at an intermediate temperature of 270 ºF, with hopes that they may reach a failure condition before the 200 ºF fixtures. High temperature aging continues for 6 GLT-S O-ring fixtures at 200 – 300 ºF. Room temperature leak test failures have been experienced in all 8 of the GLT-S O-ring fixtures aging at 350 and 400 ºF. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 - 300 ºF for 30 - 36 months. For O-ring fixtures that have failed the room temperature leak test and been disassembled, the O-rings displayed a compression set ranging from 51 – 96%. This is greater than seen to date for any packages inspected during KAC field

  1. 76 FR 9449 - National Emission Standards for Hazardous Air Pollutants: Gold Mine Ore Processing and Production...

    Science.gov (United States)

    2011-02-17

    ... add carbon adsorbers to control the ore pre-heaters. Based on this beyond-the-floor analysis, we... controls on all thermal units at Nevada gold mines. According to the commenters, these permits are...

  2. Experimental Study on the Properties of Concrete Mixed with Iron Ore Tailings

    National Research Council Canada - National Science Library

    Tian, Zhong-xi; Zhao, Zeng-hui; Dai, Chun-quan; Liu, Shu-jie

    2016-01-01

    .... Firstly, the raw materials of mixing were analyzed, and the test ratio was determined. Secondly, the workability and mechanical property of concrete specimens with different amounts of iron ore tailings as replacement were tested...

  3. The applications of microwave energy to improve grindability and extraction of gold ores

    CERN Document Server

    Huang, J H

    2000-01-01

    decomposed than pyrite at the same exposure conditions. Scanning electron microscope (SEM), optical microscope, and X-ray diffraction results indicated that the alterations during microwave treatment were complex. Some intermediate products (e.g. Fe sub ( sub 1 sub - sub x sub ) S) were formed before the sulphides were completely oxidised into hematite (Fe sub 2 O sub 3). Oxidation developed from the surfaces into the cores of the microwaved particles. Metallic particles were also formed during microwave exposure. Lihir gold ore, in which gold was finely disseminated in pyrite and marcasite, was an extremely refractory gold ore. Without pretreatment, only 37 approx 39% of the gold could be extracted with sodium cyanide. However, this was improved after the head ores or floatation concentrates were pretreated by microwave radiation. 74.5 approx 81.2% of the gold was extracted from the microwave treated head ore. The hydrometallurgical pretreatment of pyrite and marcasite in a microwave field and a conventional...

  4. SUSTAINABILITY IN PELLETIZING IRON ORE THROUGH THE INDUSTRIAL ECOLOGY AND CLEANER PRODUCTION PROGRAM

    National Research Council Canada - National Science Library

    Cristiano Farias Coelho; Gudelia Morales

    2013-01-01

      This study aims to analyze the practices of a pelletizing iron ore industry with respect to adoption of pollution prevention measures, suggested by applying the concepts of Cleaner Production and Material Flow Analysis...

  5. Tectonic ore-controlling in the middle southern segment of Da Hinggan Ling, Northeast China

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Studies on geotectonic evolution, regionally geological characteristics and ore-forming and ore-controlling structures have shown that since the Mesozoic the Da Hinggan Ling region has entered the typical intercontinental orogenic stage, which appears to be closely related to mantle plume activities. Da Hinggan Ling is a typical mantle branch structure and possesses obvious magmatic-metamorphic complexes in the core, detachment slip beds in the periphery and overlapped fault depression basins. Moreover, all these are the principal factors leading to ore formation and ore controlling in the region. This paper also further explores the mechanism of mineralization in the middle-southern segment of Da Hinggan Ling,summaries the rules of mineralization, puts forward the models of mineralization and points out the oresearch orientations in the future time.

  6. The implementation and evaluation of a behaviour-based safety intervention at an iron ore mine

    National Research Council Canada - National Science Library

    GP Möller; Sebastiaan Rothmann

    2014-01-01

    .... The aim of this study was to determine to what extent the safety culture and safety performance in an iron ore mine were affected by the implementation of a behaviour-based safety intervention...

  7. Control of relay structure on mineralization of sedimentaryexhalative ore deposit in growth faults of graben systems

    Institute of Scientific and Technical Information of China (English)

    XI Xiao-shuang; TANG Jing-ru; KONG Hua; HE Sho-xun

    2005-01-01

    Based on the study of ore deposits and orebody structures of two sedimentary-exhalative ore deposits,i. e. , Changba and Xitieshan Ore Deposits, it is found that the structural patterns of metallogenic basin of seafloor exhalative sulfide deposits in the ancient graben systems are controlled by relay structures in normal faults. The shapes of metallogenic basins are composed of tilting ramp, fault-tip ramp and relay ramp, which dominate migration of gravity current of ore-hosted fluid and shape of orebody sedimentary fan in the ramp. By measuring and comparing the difference of length-to-thickness ratios of orebody sedimentary fan, the result shows that the occurrence of the ramp has a remarkable impact on the shape of orebody.

  8. Test of oxidation behavior of sulfide ores at ambient temperature for fire control

    Institute of Scientific and Technical Information of China (English)

    WU Chao; LI Zi-jun; LI Ming; WU Guo-min

    2007-01-01

    The coincidence of relevant factors, e.g. oxygen absorption quantity, weight increment, water soluble iron ions and sulfate ion of sulfide ore samples in the oxidation process, was tested through experiment. Based on a large number of tests for a group sample of sulfide ores from a mine, some important conclusions were obtained. The results obtained by the investigation indicate that there is no general interpretation relative to the oxygen absorption and the formation products of sulfate ion and water soluble iron ions during the oxidation process of sulfide ores at ambient temperature. However, the weight increment of the sulfide ore samples in the oxidation process at ambient temperature has a linear relationship with the quantity of oxygen absorption.

  9. New data on the age of gold mineralization of the Lugokan ore cluster (Eastern Transbaikalia)

    Science.gov (United States)

    Redin, Yu. O.; Dultsev, V. F.; Nevolko, P. A.; Ponomarchuk, A. V.

    2016-08-01

    The Lugokan ore cluster is located in the southeastern part of Transbaikalia within the Aga-Borzya structural-formational zone of the Mongol-Okhotsk orogenic belt. The 40Ar/39Ar dating of K-bearing minerals of syngenetic to ore parageneses has been carried out applying stepwise heating technique: it has been demonstrated that the earliest gold-ore mineral associations are Au-pyrite-arsenopyrite (163 ±1.9 Ma) and Au-chalcopyrite (160 ±2 Ma). The later parageneses encompass the Au-polymetallic (156.3 ± 1.8 Ma) and Au-Bi (155.9 ± 4.5 Ma) one. By their ages and position in the general scheme of the Late Jurassic magmatism of Eastern Transbaikalia, the Lugokan's ore cluster gold-bearing mineral associations corresponds to the time of intrusion of the Shakhtama pluton (161 Ma) and the Porphyry Complex (159-155 Ma).

  10. Some geological problems of bedded manganese ore deposits. Sojo mangankosho no chishitsugakuteki shomondai

    Energy Technology Data Exchange (ETDEWEB)

    Momoi, H. (Ehime University, Ehime (Japan). Faculty of Science)

    1991-09-15

    This paper summarizes the bedded manganese ore deposits in Japan and in the world. Chert-hosted bedded manganese ore deposits in the Chichibu terrane and similar terranes of the inner zone of Southwest Japan are characterized by numerous small deposits composed of rhodochrosite and manganese silicate ores. They are Triassic to Middle Jurassic in age. The deposits in Japan are, together with those of Coast Ranges in western part of North America, typical in the mobile belts of the world. On the other hand, giant bedded manganese deposits represented by Nikopol, South Ukraine and Groote Eylandt, Australia, occur in the inner parts of stable continents and in platforms and consist of manganese dioxide and rhodochrosite. The deposits in mobile belts and those in stable continents are very contrasting in the scale of deposits, distribution, ore, age, depositional environment and other features. 85 refs., 2 figs., 3 tabs.

  11. Extraction of a Low Grade Zinc Ore using Gravity and Froth Flotation ...

    African Journals Online (AJOL)

    ADOWIE PERE

    used to leach base metals from sulphide concentrated with metal ... (1993). The flotation agents are known as collectors, ... lime, oleic acid, propanol, turpentine etc.) of an ore ... using Camry 25k5055 digital weighing balance. Grain Size ...

  12. Experimental Study on the Properties of Concrete Mixed with Iron Ore Tailings

    National Research Council Canada - National Science Library

    Tian, Zhong-xi; Zhao, Zeng-hui; Dai, Chun-quan; Liu, Shu-jie

    2016-01-01

      The objective of this study is to evaluate the modified performance of concrete with mixing of iron ore tailings in order to solve the shortage of natural sand and make full use of industrial waste...

  13. Prospecting and exploration of deposits of ores, useful minerals and rocks (Vademecum 1)

    Energy Technology Data Exchange (ETDEWEB)

    Prokop, F.W.; Streck, W.; Sagheer, M.; Tschoepke, R.W.; Walther, H.W.; Pietzner, H.; Stadler, G.; Vogler, H.; Werner, H.

    1981-01-01

    Geologists and practical men are given instructions for prospecting and exploring deposits of ores, industrial minerals and useful rocks. The improvements and innovations of the prospecting and exploration technologies as well as the production and processing methods are considered.

  14. Aging of Weapon Seals – An Update on Butyl O-ring Issues

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Mark H.

    2011-07-13

    During testing under the Enhanced Surveillance Campaign in 2001, preliminary data detected a previously unknown and potentially serious concern with recently procured butyl o-rings on several programs. All butyl o-rings molded from a proprietary formulation throughout the period circa 1999 through 2001 had less than a full cure. Engineering judgment was that under curing is detrimental and could possibly lead to sub-optimum performance or, in the worst case, premature seal failure. An aging study was undertaken to ensure that suspect o-rings installed in the stockpile will retain sufficient sealing force for a minimum ten-year service life. A new prediction model developed for this study indicates suspect o-rings do not need to be replaced before the ten-year service life. Long-term testing results are reported on a yearly basis to validate the prediction model. This report documents the aging results for the period September 2002 to January 2011.

  15. A Study of Occurrences of Ag in Pb-Zn-Cu Ore Deposits in China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A systematic study of occurrences of silver in 156 Pb-Zn-Cu ore deposits indicates that silver mainly occurs in nonferrous metal ore deposits in forms of association and paragenesis. It occurs mainly as independent minerals in nature and occasionally as ion adsorption, isomorphous or amorphous silver minerals. Nearly 190 silver minerals have been discovered in China. Their shapes, constituents, textures, grain sizes, embedded types, distribution patterns, mineral assemblages and metallogenic series suggest that these characteristics are closely related to geneses of deposits and dependent of ore-forming conditions. Pb, Zn and Cu sulphides are the main carrier minerals of silver. The partition of silver in ore is constrained by the mineralization intensity, grain size and embedded form of silver minerals and mineral assemblages.

  16. Chlorination of nickel ore by gaseous chlorine in the presence of active additives

    Directory of Open Access Journals (Sweden)

    Ilić Ilija B.

    2003-01-01

    Full Text Available Paper presents a thermodynamic analysis of chemical reactions occurring during chlorination with and without additives for both nickel oxides and nickel ferrites, which are component parts of nickel ore. The experimental research investigated the influence of temperature in the range from 600 up to 1000 °C and time (up to 3 h on the chlorination degree of nickel ores with and without additives. It was found that the introduction of additives such as C, S, BaS and NaCl intensified the chlorination of nickel ore. The results can be applied and may help determine the optimal conditions for the chlorination of low-grade ferrous nickel ores.

  17. Ore-Bearing Formations of the Precambrian in South China and Their Prospects

    Institute of Scientific and Technical Information of China (English)

    HE Jurui; WANG Aiguo; RUI Xingjian; LI Chunhai

    2004-01-01

    In the Precambrian System of the Yangtze and Cathaysian plates six ore-bearing formations can be identified: the Cu-Pb-Zn-bearing formations in volcanic rocks of marine facies of the Neoarchean-Paleoproterozoic, CuAu-bearing formations and Pb-Zn-bearing formations in volcanic rocks of marine facies of the Mesoproterozoic, Pb-Znbearing formations in volcaniclastic rock and carbonate rock of the Neoproterozoic, Fe-Mn-bearing formations in the volcaniclastic rock of the Neoproterozoic, and Ni-Cr-serpentine-bearing formations in ophiolite and ultrabasic rock of the Meso- and Neoproterozoic. They were mostly formed in the marginal rift valleys of the Yangtze and Cathaysian plates,where occur stratabound and stratiform ore deposits, thermal deposits and porphyry polymetallic deposits. The six regions with ore-bearing formations have good prospects for ore deposits.

  18. Microporosity of BIF hosted massive hematite ore, Iron Quadrangle, Brazil

    Directory of Open Access Journals (Sweden)

    CÉSAR A.C. VARAJÃO

    2002-03-01

    Full Text Available Massive hematite ore (MHO is a special high-grade iron ore, used as lump ore in the process of obtaining direct reduction iron (DRI. The influence of porosity on the reducibility of MHO from the Capitão do Mato Mine (Iron Quadrangle, Brazil was investigated using optical and scanning electron microscopes on drill core and open pit samples. Hematite is the main component of the samples and occurs as granular crystals (10 mum, microplates (1 mum and euhedral martite (10 to 30 mum. Quartz, maghemite, kenomagnetite and goethite are minor components. Primary micropores (Å to 1 mum are associated with microplaty crystals that fill cavities between granular hematite. Secondary micropores (Å to 5 mum related to euhedral martite crystals, are the most important. The total porosity of weathered samples, measured using nitrogen adsorption and mercury injection, attains values up to 11%, whereas unweathered samples have a porosity less than 2.5%. Reducibility is strongly enhanced by porosity, but inhibited by structure (bedding.O minério de hematita compacta (MHC é um tipo de minério de ferro de alto grau usado como minério granulado na obtenção do ferro via redução direta (DRI. A influência da porosidade sobre a redutibilidade do MHC da Mina de Capitão do Mato (Quadrilátero Ferrífero, Brasil, foi investigada em amostras de furos de sonda e de afloramentos da mina, usando-se microscópio óptico e eletrônico de varredura. Hematita é o principal componente mineralógico e ocorre sob diferentes formas: granular (10 mim, microtabular (1 mim e euédrico (10 a 30 mim. Quartzo maghemita, kenomagnetita e goethita são componetes menores. Microporos primários (Å to 1 mim associam-se a cristais de hematita microtabular, que preenchem espaços entre cristais de hematita granular. Microporos secundários (Å to 5 mim, relacionados com os cristais de martita euédrica, são os mais importantes. A porosidade total das amostras do MHC, medida atrav

  19. Coupled Heat and Fluid Flow Modeling of the Earth's Largest Zinc Ore Deposit at Red Dog, Alaska: Implications for Structurally-Focused, Free Convection in Submarine Sedimentary Basins

    Science.gov (United States)

    Garven, G.; Dumoulin, J. A.; Bradley, D. A.; Young, L. E.; Kelley, K. D.; Leach, D. L.

    2002-12-01

    Crustal heat flow can provide a strong mechanism for driving groundwater flow, particularly in submarine basins where other mechanisms for driving pore fluid flow such as topography, compaction and crustal deformation are too weak or too slow to have a significant effect on disturbing conductive heat flow. Fault zones appear to play a crucial role in focusing fluid migration in basins, as inferred in ancient rocks by many examples of hydrothermal deposits of sediment-hosted ores worldwide. Many rift-hosted deposits of lead, zinc, and barite ore appear to have formed at or near the seafloor by focused venting of hot basinal fluids and modified seawater, although the geophysical nature of these systems is not so well known. For example, the upper Kuna Formation, a finely laminated, black, organic-rich siliceous mudstone and shale in the Western Brooks Range of northwest Alaska, is host to the largest resources of zinc yet discovered in the Earth's crust, containing ore reserves in excess of 175 Mt averaging about 16% Zn and 5% Pb. Although situated today in a highly-deformed series of structural allocthonous plates thrusted during the Jurassic to Cretaceous Brookian Orogeny, the stratiform ores are thought to have formed much earlier in the anoxic, mud-rich Carboniferous-age Kuna Basin when adjacent carbonate platforms were drowned by rifting and tectonic subsidence. Fluid inclusion studies of ore-stage sphalerite and gangue minerals indicate sub-seafloor mineralization temperatures less than 200oC and most likely between 120 to 150 oC, during a period of sediment diagenesis and extensional faulting. We have constructed fully-coupled numerical models of heat and fluid flow to test hydrologic theories for free convection, submarine venting and subsequent ore formation, as constrained by paleoheat flow and petrologic observations. A finite element grid was designed and adapted for a cross section of the Kuna Basin, geologically restored to latest Mississippian time

  20. Mineralogical-Geochemical Peculiarities of Ores in Pyritaceous Fields of Filizchai Type in the Greater Caucasus

    Directory of Open Access Journals (Sweden)

    NOVRUZ A. NOVRUZOV

    2010-12-01

    Full Text Available Pyritaceous fields of the south slope of the Greater Caucasus confined to the Lower-Middle Jurassic sandy clayey deposits are: polygenic polychrone formations which were formed by a complex of hydrothermal sedimentary, hydrothermal metasomatic and hydrothermal metamorphogenic processes of ore formation. Filizchai pyritaceous polymetallic field is the largest in the region and can be characterized by diversity of texture-mineralogical types of ores, rich mineral composition and with geochemical spectrum. Some of the admixture components (Cd, In, Tl, Ga, Ge, Se, Hg are only in isomorphic forms in ores, others (Te, Bi, Au, Ag, Co, Sn, As along with it characterize in their own minerals. The Co is mainly concentrated in pyrite, pyrrhotine; Ag, Bi and also Te – in galenite and chalcopyrite; Se – in pyrite, pyrrhotine and galenite; in sphalerite (mainly in marmatite and chalcopyrite; Cd, Ga, Ge – in sphalerite, mainly in cleiophane; Au – in pyrite and chalcopyrite; Tl – in galenite and colloform pyrite. In all sulphides selenium prevails over tellurium (excepting the late chalcopyrite and cobalt over nickel. Maximum amount of cobalt is confined to pyrite from pyritaceous polymetallic ores and late generation of pyrrhotine. The nature of the connection between chemical elements in ores coordinates with determined stages of minerals formation. The main productive stage of ore formation bringing the main mass of gold, silver, rare and other precious components of ores are sulphosalt polymetallic stage of sulphur ploymetallic stage. Comparative analysis of absolute content of gold, silver and values of gold-silver relation in pyrite fields ores of region with appropriate values in meteorite standard indirectly indicates the relationship between gold-silver mineralization and assimilation crust source.