21 CFR 874.3695 - Mandibular implant facial prosthesis.

Science.gov (United States)

2010-04-01

... made of materials such as stainless steel, tantalum, titanium, cobalt-chromium based alloy... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mandibular implant facial prosthesis. 874.3695... (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3695 Mandibular implant...

Impact of upper airway abnormalities on the success and adherence to mandibular advancement device treatment in patients with Obstructive Sleep Apnea Syndrome.

Science.gov (United States)

Prescinotto, Renato; Haddad, Fernanda Louise Martinho; Fukuchi, Ilana; Gregório, Luiz Carlos; Cunali, Paulo Afonso; Tufik, Sérgio; Bittencourt, Lia Rita Azeredo

2015-01-01

The mandibular advancement device (MAD) is a option to treat patients with Obstructive Sleep Apnea Syndrome (OSAS). To assess the influence of upper airway abnormalities on the success of and adherence to MAD in patients with OSAS. Prospective study with 30 patients with mild to moderate OSAS and indications for MAD. The protocol included questionnaires addressing sleep and nasal complaints, polysomnography, and upper airway assessment. The analyzed parameters of patients who showed therapeutic success and failure and those who exhibited good and poor treatment adherence were compared. 28 patients completed the protocol; 64.3% responded successfully to treatment with MAD, and 60.7% exhibited good adherence to treatment. Factors associated with greater success rates were younger age (p=0.02), smaller cervical circumference (p=0.05), and lower AHI at baseline (p=0.05). There was a predominance of patients without nasal abnormalities among patients treated successfully compared to those with treatment failure (p=0.04), which was not observed in relation to adherence. Neither pharyngeal nor facial skeletal abnormalities were significantly associated with either therapeutic success or adherence. MAD treatment success was significantly lower among patients with nasal abnormalities; however, treatment adherence was not influenced by the presence of upper airway or facial skeletal abnormalities. Copyright © 2015 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Maxillary-driven simultaneous maxillo-mandibular distraction for hemifacial microsomia.

Science.gov (United States)

Nakajima, Hideo; Sakamoto, Yoshiaki; Tamada, Ikkei; Ogata, Hisao; Kishi, Kazuo; Sakamoto, Teruo

2011-12-01

We treat hemifacial microsomia with a combination of surgery and orthodontic treatment during the growth period, resulting in early improvement in facial asymmetry and the induction of normal growth. We previously used gradual distraction of the mandibular ramus for Pruzansky's type II classification (Pruzansky, 1969). In type II cases, the maxilla should also be treated actively as, using this technique, improvement of the occlusal plane is difficult to achieve, resulting in a cross bite and difficulties in post-operative orthodontic treatment-especially in older patients. Morphologically, the mandibular angle region of the operative side is flat, and the angle of the mouth remains elevated. We performed mandibular-driven simultaneous maxillo-mandibular distraction while the occlusion was maintained using intermaxillary anchorage. However, mandibular-driven distraction tended to elongate the face because the mandible only elongated downwards and the mandibular ramus did not reach the glenoid. Furthermore, external distraction devices produce significant distress for patients until removal of the device and cause scars on the face. We developed a new internal distraction device with a variable angle and performed maxillary-driven simultaneous maxillo-mandibular distraction using this device. The result was morphologically satisfactory and solved the above problems. Because the patient was in the growth period, careful follow-up and induction to normal growth were important while the inferior growth of the affected side was monitored. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Effects of CPAP and mandibular advancement device treatment in obstructive sleep apnea patients: a systematic review and meta-analysis.

Science.gov (United States)

Schwartz, Martha; Acosta, Luis; Hung, Yuan-Lung; Padilla, Mariela; Enciso, Reyes

2017-11-11

The purpose of this review is to conduct a systematic review and meta-analysis comparing the effects of continuous positive airway pressure (CPAP) with a mandibular advancement device (MAD) in improving the quality of life (sleepiness, cognitive, and functional outcomes) in patients diagnosed with obstructive sleep apnea (OSA). Authors identified randomized, placebo-controlled studies from MEDLINE through PubMed, Web of Science, and the Cochrane Library. Studies were assessed for inclusion and exclusion criteria, as well as risk of bias. Initial search yielded 240 unduplicated references, which the authors reduced to 12 relevant studies. Patients with CPAP therapy showed no statistically significant difference in the post-treatment quality of life measured with the SF-36 mental health component (p = .994), or the SF-36 physical functioning component (p = .827). There was no significant improvement in neither Functional Outcomes of Sleep Questionnaire (p = .788) nor cognitive performance (p = .395) compared to patients treated with oral appliances. However, the meta-analyses' overall results showed a significant improvement in the post-treatment apnea-hypopnea index (AHI) in favor of CPAP therapy as compared with the oral appliance group (p CPAP treatment (p = .047). Further studies are needed. Compliance with treatment was 1.1 h per night significantly lower with CPAP than MAD (p = .004), which could explain why though efficacy (AHI) is better with CPAP, no significant results are shown for quality of life, cognitive, and functional outcomes. Though CPAP is significantly more efficient in reducing AHI (moderate quality of evidence), it has a significantly lower compliance resulting in no differences with MAD in quality of life, cognitive, or functional outcomes. Sleep medicine professionals should monitor treatment compliance and offer patients non-compliant with CPAP an oral appliance for treatment of OSA.

[Stereomodel-assisted fibula free flap harvest and mandibular reconstruction: A technical note. Literature review of CAS and CAM applied to mandibular reconstruction.

Science.gov (United States)

Pauchot, J; Lachat, J; Floret, F; Badet, J-M; Tavernier, L; Aubry, S

2013-08-05

Mandibular reconstruction with fibula free flap harvest is currently the reference technique. Various preoperative processes have been developed to optimize this reconstruction. We report our experience with a simple, inexpensive, preoperative technique requiring a 3D printer, a device for maintaining mandibular reduction, a paper-cutting guide. Stereomodels of the mandible were obtained from computed tomography scan data and printed 3D in ABS. It allowed planning mandibular osteotomies, determine the angle between two bone fragments, and preoperatively modeling the osteosynthesis plate. A paper-cutting guide, and a simple device for maintaining mandibular reduction were also built. Two patients were operated on with this technique, with follow-up at 6 and 8 months. Reconstructions were successful with good clinical outcome in terms of mandibular contour and reconstructed segments positions. Preoperative planning of reconstruction may be used for mandibular osteotomies, fibular osteotomies, maintaining mandibular reduction, osteosynthesis, or placing implants for dental rehabilitation. The most complex procedures can virtually plan all these steps, but they are expensive and long to implement. Nevertheless, such procedures are quite expansive and require time not always compatible with carcinoma. Using a mandibular stereomodel is fast, easy, and cheap. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Clinical effectiveness and cost-effectiveness results from the randomised controlled Trial of Oral Mandibular Advancement Devices for Obstructive sleep apnoea-hypopnoea (TOMADO) and long-term economic analysis of oral devices and continuous positive airway pressure.

Science.gov (United States)

Sharples, Linda; Glover, Matthew; Clutterbuck-James, Abigail; Bennett, Maxine; Jordan, Jake; Chadwick, Rebecca; Pittman, Marcus; East, Clare; Cameron, Malcolm; Davies, Mike; Oscroft, Nick; Smith, Ian; Morrell, Mary; Fox-Rushby, Julia; Quinnell, Timothy

2014-01-01

BACKGROUND Obstructive sleep apnoea-hypopnoea (OSAH) causes excessive daytime sleepiness (EDS), impairs quality of life (QoL) and increases cardiovascular disease and road traffic accident risks. Continuous positive airway pressure (CPAP) treatment is clinically effective but undermined by intolerance, and its cost-effectiveness is borderline in milder cases. Mandibular advancement devices (MADs) are another option, but evidence is lacking regarding their clinical effectiveness and cost-effectiveness in milder disease. OBJECTIVES (1) Conduct a randomised controlled trial (RCT) examining the clinical effectiveness and cost-effectiveness of MADs against no treatment in mild to moderate OSAH. (2) Update systematic reviews and an existing health economic decision model with data from the Trial of Oral Mandibular Advancement Devices for Obstructive sleep apnoea-hypopnoea (TOMADO) and newly published results to better inform long-term clinical effectiveness and cost-effectiveness of MADs and CPAP in mild to moderate OSAH. TOMADO A crossover RCT comparing clinical effectiveness and cost-effectiveness of three MADs: self-moulded [SleepPro 1™ (SP1); Meditas Ltd, Winchester, UK]; semibespoke [SleepPro 2™ (SP2); Meditas Ltd, Winchester, UK]; and fully bespoke [bespoke MAD (bMAD); NHS Oral-Maxillofacial Laboratory, Addenbrooke's Hospital, Cambridge, UK] against no treatment, in 90 adults with mild to moderate OSAH. All devices improved primary outcome [apnoea-hypopnoea index (AHI)] compared with no treatment: relative risk 0.74 [95% confidence interval (CI) 0.62 to 0.89] for SP1; relative risk 0.67 (95% CI 0.59 to 0.76) for SP2; and relative risk 0.64 (95% CI 0.55 to 0.76) for bMAD (p < 0.001). Differences between MADs were not significant. Sleepiness [as measured by the Epworth Sleepiness Scale (ESS)] was scored 1.51 [95% CI 0.73 to 2.29 (SP1)] to 2.37 [95% CI 1.53 to 3.22 (bMAD)] lower than no treatment (p < 0.001), with SP2 and bMAD significantly better than SP1

Soft tissue changes and its stability as a sequlae to mandibular advancement.

Science.gov (United States)

Uppada, Uday Kiran; Sinha, Ramen; Reddy, D Sreenatha; Paul, Dushyanth

2014-01-01

To predict the changes and evaluate the stability that occurs in the soft tissues following the skeletal movement subsequent to surgical advancement of the mandible through bilateral sagittal split osteotomy and to provide the patient reliable information with regard to esthetic changes that can be expected following the treatment. Twenty adult patients diagnosed with skeletal class II malocclusion and underwent bilateral sagittal split osteotomy for mandibular advancement by a mean of 8 mm using rigid fixation were included in the study. Soft tissue changes brought about by the surgical procedure and their stability over a period of time were evaluated prospectively using 12 linear (4 vertical and 8 horizontal) and 4 angular measurements on profile cephalograms which were taken preoperatively after the pre-surgical orthodontics (T1) and postoperatively with duration of 1 month (T2) and 6 months (T3) respectively. It was observed that compared to the linear measurements, the angular measurements showed significant changes. The improvement in the esthetic outcome is a direct reflection of the angular changes whereas the linear changes played a contributing role. Following mandibular advancement surgery the profiles of the patients was perceived to have improved with reduction in the facial convexity, an increase in the lower facial height, decrease in the depth of the mentolabial sulcus and improvement in the lip competency with lengthening, straightening and thinning of the lower lip. The soft tissue response and its stability depends on the stability of the surgical procedure itself, postsurgical growth and remodeling of the hard tissues and soft tissue changes as a result of maturation and aging.

Mandibular advancement appliance for obstructive sleep apnoea: results of a randomised placebo controlled trial using parallel group design

DEFF Research Database (Denmark)

Petri, N.; Svanholt, P.; Solow, B.

2008-01-01

The aim of this trial was to evaluate the efficacy of a mandibular advancement appliance (MAA) for obstructive sleep apnoea (OSA). Ninety-three patients with OSA and a mean apnoea-hypopnoea index (AHI) of 34.7 were centrally randomised into three, parallel groups: (a) MAA; (b) mandibular non......). Eighty-one patients (87%) completed the trial. The MAA group achieved mean AHI and Epworth scores significantly lower (P group and the no-intervention group. No significant differences were found between the MNA group and the no-intervention group. The MAA group had...

Anterior mandibular apical base augmentation in the surgical orthodontic treatment of mandibular retrusion.

Science.gov (United States)

Brusati, R; Giannì, A B

2005-12-01

The authors describe a surgical technique alternative to traditional pre-surgical orthodontics in order to increase the apical base in mandibular retrusion (class II, division I). This subapical osteotomy, optimizing inferior incisal axis without dental extractions and a long orthodontic treatment, associated to genioplasty permits to obtain an ideal labio-dento-mental morphology. This procedure avoids in some cases the need of a mandibular advancement and, if necessary, it reduces his entity with obvious advantages.

Mandibular Reconstruction Using Pectoralis Major Myocutaneous Flap and Titanium Plates after Ablative Surgery for Locally Advanced Tumors of the Oral Cavity

International Nuclear Information System (INIS)

El-Zohairy, M.A.F.; Mostafa, A.; Amin, A.; Abd El-Fattah, H.; Khalifa, Sh.

2009-01-01

The most common indication for mandible resection remains ablative surgery for cancer of the oral cavity and oropharynx. The use of vascularized bone grafts has become state-of-the-art for mandibular reconstruction. However, the high cost of such surgery may not be justified in patients with advanced disease and poor prognosis, or poor performance status. Objective: The purpose of this study was to evaluate outcomes of mandibular reconstruction using titanium plates covered with a pedicled pectoralis major myocutaneous flap after ablative surgery for locally advanced tumors of the oral cavity. Patients and methods: The study involves a total of 33 patients with locally advanced tumors of the oral cavity that were treated over 5 year period (2003-2008) at the National Cancer Institute, Cairo University, Egypt. Mandibular resections were performed for treatment of patients with primary oral cavity tumors invading the mandible followed by mandibular reconstruction using titanium plates covered with a pedicled pectoralis major myocutaneous flap. Results: Of 33 patients, 25 (75.75%) were males and 8 (24.25%) were females. The age ranged from 42 to 70 years (mean 52.3±5.9 years). Tongue cancer was the most common tumor, it affects 17 (51.5%) of the patients, 24 patients received post operative radiation therapy. The flap survival was 100%; partial necrosis of the flap skin was observed in 3 patients. One patient developed wound dehiscence. Oro-cutaneous fistula occurred in 5 patients that closed spontaneously. There were 4 cases of plate failure, one patient experienced plate fracture at 13 months after reconstruction. Three patients developed external plate exposure. All patients achieved good functional and acceptable aesthetic outcome. The overall cause-specific cumulative survival was 72.7% at one year and 56.1% at two years. Conclusions: Titanium plate and pedicled pectoralis major myocutaneous flap is a safe and reliable option for composite mandibular defects

Rotational Distraction for the Treatment of Severe Mandibular Retrognathia.

Science.gov (United States)

Ito, Osamu; Mitsugi, Masaharu; Alcalde, Rafael E; Yano, Tomoyuki; Uemura, Noriko; Okazaki, Mutsumi

2015-07-01

The main problem with intraoral distraction of the mandible is the inability to achieve the three-dimensional mandibular correction as planned preoperatively. We developed a technique that allows spontaneous changes in the direction of mandibular elongation using an intraoral distractor. After mandibular osteotomy, the distractor is fixed to the distal segment of the mandible using a single bicortical screw, allowing anterior-posterior, vertical and limited lateromedial changes in the vector of distraction. Mandibular lengthening is performed while keeping the maxilla and mandible in class I occlusion with intermaxillary fixation. As the distraction device is activated allowing mandibular elongation, the proximal segment, guided by the surrounding soft tissues, moves and rotates posterosuperiorly. Mandibular lengthening is continued until the condylar head reaches an adequate position in the mandibular fossa as confirmed clinically and radiographically. Thirty-three patients with mandibular retrognathia received this treatment and good results were obtained.

Technological advances in endodontics: treatment of a mandibular molar with internal root resorption using a reciprocating single-file system.

Science.gov (United States)

de Souza, Samir Noronha; Marques, André Augusto Franco; Sponchiado-Júnior, EmÍlio Carlos; Roberti Garcia, Lucas da Fonseca; da Frota, Matheus Franco; de Carvalho, Fredson Márcio Acris

2017-01-01

The field of endodontics has become increasingly successful due to technological advances that allow clinicians to solve clinical cases that would have been problematic a few years ago. Despite such advances, endodontic treatment of teeth with internal root resorption remains challenging. This article presents a clinical case in which a reciprocating single-file system was used for endodontic treatment of a mandibular molar with internal root resorption. Radiographic examination revealed the presence of internal root resorption in the distobuccal root canal of the mandibular right first molar. A reciprocating single-file system was used for root canal instrumentation and final preparation, and filling was obtained through a thermal compaction technique. No painful symptoms or periapical lesions were observed in 12 months of follow-up. The results indicate that a reciprocating single-file system is an adequate alternative for root canal instrumentation, particularly in teeth with internal root resorption.

Maxillomandibular advancement as the initial treatment of obstructive sleep apnoea: Is the mandibular occlusal plane the key?

Science.gov (United States)

Rubio-Bueno, P; Landete, P; Ardanza, B; Vázquez, L; Soriano, J B; Wix, R; Capote, A; Zamora, E; Ancochea, J; Naval-Gías, L

2017-11-01

Maxillomandibular advancement (MMA) can be effective for managing obstructive sleep apnoea (OSA); however, limited information is available on the predictor surgical variables. This study investigated whether normalization of the mandibular occlusal plane (MOP) was a determinant factor in curing OSA. Patients with moderate or severe OSA who underwent MMA were evaluated by preoperative and postoperative three-dimensional (3D) scans and polysomnograms. The postoperative value of MOP and the magnitude of skeletal advancement were the predictor variables; change in the apnoea-hypopnoea index (AHI) was the main outcome variable. Thirty-four subjects with a mean age of 41±14years and 58,8% female were analysed. The Epworth Sleepiness Scale (ESS) was 17.4±5.4 and AHI was 38.3±10.7 per hour before surgery. Postoperative AHI was 6.5±4.3 per hour (P<0.001) with 52.94% of the patients considered as cured, and 47.06% suffering from a mild residual OSA with ESS 0.8±1.4 (P<0.001). 3D changes revealed a volume increase of 106.3±38.8%. The mandible was advanced 10.4±3.9mm and maxilla 4.9±3.2mm. MOP postoperative value was concluded to be the best predictor variable. Treatment planning should include MOP normalization and a mandibular advancement between 6 and 10mm. The maxillary advancement would depend on the desired aesthetic changes and final occlusion. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Advanced Mechatronics and MEMS Devices

CERN Document Server

2013-01-01

Advanced Mechatronics and MEMS Devicesdescribes state-of-the-art MEMS devices and introduces the latest technology in electrical and mechanical microsystems. The evolution of design in microfabrication, as well as emerging issues in nanomaterials, micromachining, micromanufacturing and microassembly are all discussed at length in this volume. Advanced Mechatronics also provides a reader with knowledge of MEMS sensors array, MEMS multidimensional accelerometer, artificial skin with imbedded tactile components, as well as other topics in MEMS sensors and transducers. The book also presents a number of topics in advanced robotics and an abundance of applications of MEMS in robotics, like reconfigurable modular snake robots, magnetic MEMS robots for drug delivery and flying robots with adjustable wings, to name a few. This book also: Covers the fundamentals of advanced mechatronics and MEMS devices while also presenting new state-of-the-art methodology and technology used in the application of these devices Prese...

Optoelectronic Devices Advanced Simulation and Analysis

CERN Document Server

Piprek, Joachim

2005-01-01

Optoelectronic devices transform electrical signals into optical signals and vice versa by utilizing the sophisticated interaction of electrons and light within micro- and nano-scale semiconductor structures. Advanced software tools for design and analysis of such devices have been developed in recent years. However, the large variety of materials, devices, physical mechanisms, and modeling approaches often makes it difficult to select appropriate theoretical models or software packages. This book presents a review of devices and advanced simulation approaches written by leading researchers and software developers. It is intended for scientists and device engineers in optoelectronics, who are interested in using advanced software tools. Each chapter includes the theoretical background as well as practical simulation results that help to better understand internal device physics. The software packages used in the book are available to the public, on a commercial or noncommercial basis, so that the interested r...

Side effects of intraoral devices for OSAS treatment.

Science.gov (United States)

Teixeira, Andressa Otranto de Britto; Andrade, Ana Luiza Ladeia; Almeida, Rhita Cristina da Cunha; Almeida, Marco Antonio de Oliveira

2017-10-14

Intraoral devices have increasingly assumed a key role in the treatment of obstructive sleep apnea syndrome, but there are limitations to their indication and side effects that result from their continuous use, as well as the use of the continuous positive airway pressure device. To evaluate the changes in dental positioning caused by the continuous use of mandibular advancement devices. A prospective longitudinal study with a sample of 15 patients, with evaluation of complete documentation after a mean time of 6.47 months, assessed changes in dental positioning due to the use of the Twin Block oral device for the treatment of patients with apnea. The following variables were evaluated: overjet, overbite, upper and lower intermolar distances, upper and lower intercanine distances, Little's irregularity index and the incisor mandibular plane angle. An intraclass correlation test was performed and a correlation index>0.08 was accepted. After verifying the normal sample distribution (Shapiro-Wilks), a parametric test was used (t test), with a significance level set at 5%. There was a decrease in the values of overjet, overbite and Little's irregularity index, whereas there was an increase in the lower intercanine distance and IMPA values. All these variables are influenced, at different levels, by the forward inclination of the lower incisors, an action that can be expected due to the force applied by the device on the dentition. The other variables did not show statistically significant differences. After a mean time of 6.47 months of use of the mandibular advancement device, there were statistically significant changes in the dental positioning, but they were not clinically relevant. However, it is relevant that this device is commonly in use over long periods of time, making the monitoring of these patients of the utmost importance for the duration of their therapy. Copyright © 2017 Associação Brasileira de Otorrinolaringologia e Cirurgia C�

Obstructive sleep apnea syndrome in a pubescent boy of short stature was improved with an orthodontic mandibular advancement oral appliance: a case report.

Science.gov (United States)

Ito, Shin; Otake, Hironao; Tsuiki, Satoru; Miyao, Etsuko; Noda, Akiko

2015-01-15

We report a 16-year-old pubescent pediatric patient with obstructive sleep apnea syndrome (OSAS) and short stature whose apnea hypopnea index (AHI) was significantly reduced following the use of an orthodontic oral appliance that advances the mandible ventrally. The mandible was advanced 64% of the maximal mandibular protrusive position with use of the appliance over a 3-year period. The patient's AHI without the appliance in place decreased from 101.6/h at baseline to 11/h after treatment. Moreover, the patient's height increased 14 cm during treatment, resulting in height close to the average height for his age. Cephalometric analysis revealed an improvement in his retrognathic mandible and proclination of the upper front teeth. In conclusion, an orthodontic mandibular advancement oral appliance played an important role not only in improving the patient's OSAS but also in normalizing his physical growth during puberty. © 2015 American Academy of Sleep Medicine.

Management of periodontally compromised mandibular molar with Hemisectioning: A case report

Directory of Open Access Journals (Sweden)

Bandu Napte

2014-01-01

Full Text Available Introduction: Hemisection involves sectioning of a periodontally involved mandibular molar so as to remove the involved root and save the remaining tooth. This procedure helps in saving a tooth which otherwise would have been deemed for extraction. Hemisection refers to removal or separation of root with its accompanying crown portion of two-rooted teeth, most commonly mandibular molars. Method: In this case report, an advanced Endo-Perio lesion on a left mandibular first molar was successfully treated by root-canal treatment and hemisection. This procedure helps preserve the tooth structure, alveolar bone and promote cost savings over other treatment options. Conclusion: Hemisection is a treatment option for saving a mandibular molar which is in advanced stage of periodontal disease of one root. Removal of the affected root will help in retaining the remaining tooth structure.

Occlusal plane rotation: aesthetic enhancement in mandibular micrognathia.

Science.gov (United States)

Rosen, H M

1993-06-01

Patients afflicted with extreme degrees of mandibular micrognathia typically have vertically deficient rami as well as sagittally deficient mandibular bodies. This results in deficient posterior facial height, an obtuse gonial angle, excessively steep occlusal and mandibular planes, and a compensatory increase in anterior facial height. The entire maxillomandibular complex is overrotated in a clockwise direction. Standard orthognathic surgical correction fails to address this rotational deformity. As a consequence, the achieved projection of the lower face is inadequate, posterior facial height is further reduced, and occlusal and mandibular planes remain steep. Eleven patients with severe mandibular micrognathia underwent a surgical correction involving occlusal plane rotation to its normal orientation relative to Frankfort horizontal. This was accomplished by Le Fort I osteotomy to shorten the anterior maxilla (creating open bites in seven patients and making preexisting open bites worse in four patients) and sagittal split ramus osteotomies to advance and rotate the mandibular body counterclockwise, thus closing the surgically produced open bite. Counterclockwise rotation of the mandible afforded significantly greater sagittal displacement at the B point (mean 17 mm) than at the first molar (mean 10 mm) and produced adequate degrees of projection of the lower face when accompanied by a modest sliding genioplasty (mean 6.9 mm). Total advancement at the pogonion was a mean of 25.2 mm. In addition, posterior facial height was preserved, and mandibular and occlusal planes were normalized to mean angles of 27 and 10 degrees, respectively. At follow-up, which ranged from 9 to 24 months with a mean of 14.1 months, the mean sagittal relapse at the B point was 1.9 mm. Although heretofore considered unstable and therefore not clinically accepted, maxillomandibular counterclockwise rotation to normalize the occlusal plane rotational deformity provides stable, aesthetically

A new technique for mandibular osteotomy

Directory of Open Access Journals (Sweden)

Puricelli Edela

2007-03-01

Full Text Available Abstract Sagittal split osteotomy (SSO is a surgical technique largely employed for mandibular mobilizations in orthognatic procedures. However, the traditional design of buccal osteotomy, located at the junction of mandibular ramus and body, may prevent more extensive sliding between the bone segments, particularly on the advance, laterality and verticality of the mandibular body. The author proposes a new technical and conceptual solution, in which osteotomy is performed in a more distal region, next to the mental formamen. Technically, the area of contact between medullary-cancellous bone surfaces is increased, resulting in larger sliding rates among bone segments; it also facilitates the use of rigid fixation systems, with miniplates and monocortical screws. Conceptually, it interferes with the resistance arm of the mandible, seen as an interpotent lever of the third gender.

Mandibular distraction in neonates: indications, technique, results

Directory of Open Access Journals (Sweden)

Sesenna Enrico

2012-02-01

Full Text Available Abstract Background The Pierre Robin Sequence features were first described by Robin in 1923 and include micrognathia, glossoptosis and respiratory distress with an incidence estimated as 1:8,500 to 1:20,000 newborns. Upper airway obstruction and feeding difficulties are the main concerns related to the pathology. Mandibular distraction should be considered a treatment option (when other treatments result inadequate. Patiants and methods Ten patients between the ages of 1 month and 2 years with severe micrognathia and airway obstruction were treated with Mandibular Distraction Osteogenesis (MDO. All patients underwent fibroscopic examination of the upper airway and a radiographic imaging and/or computed tomography scans to detect malformations and to confirm that the obstruction was caused by posterior tongue displacement. All patients were evaluated by a multidisciplinary team. Indications for surgery included frequent apneic episodes with severe desaturation (70%. Gavage therapy was employed in all patients since oral feeding was not possible. The two tracheotomy patients were 5 months and 2 years old respectively, and the distraction procedure was performed to remove the tracheotomy tube. All patients were treated with bilateral mandibular distraction: two cases with an external multivector distraction device, six cases with an internal non-resorbable device and two cases with an internal resorbable device. In one case, the patient with Goldenhar's Syndrome, the procedure was repeated. Results The resolution of symptoms was obtained in all patients, and, when present, tracheotomy was removed without complications. Of the two patients with pre-existing tracheotomies, in the younger patient (5 months old the tracheotomy was removed 7 days postoperatively. In the Goldenhar's syndrome case (2 years old a Montgomery device was necessary for 6 months due to the presence of tracheotomy-inducted tracheomalacia. Patients were discharged when the

[Maxillo-facial surgery in skeletal Class II: repercussions on the temporo-mandibular joints].

Science.gov (United States)

Manière-Ezvan, Armelle; Savoldelli, Charles; Busson, Floriant; Oueiss, Arlette; Orthlieb, Jean-Daniel

2016-03-01

These interventions usually aimed at the correction of the skeletal discrepancy by mandibular retrognatism with an advancement of the distal portion of the mandible after mandibular osteotomy. The position of the condyle is determined during the osteosynthesis with miniplates. Condyles are set back in relation with the supine position of the patient and the weakness of his (her) curarized muscle. All studies show that surgery of mandibular advancement causes a lateral, torque and backward movement of the condyles, all harmful to the condyles. Factors that predispose to condylar resorption are "the patient": a woman, young (between 15 and 40), high mandibular angle, with a history of temporo-mandibular disorders and surgical overload applied to the condyles. What are the possible solutions to avoid failures? Patient preparation before surgery and surgery simulation with an articulator, condylar position control during surgery, working with surgeons to achieve a condylar portion stabilization system (with the CAD), quickly set up a mobilization of the mandible by physiotherapy. © EDP Sciences, SFODF, 2016.

Socio-Economic Status: A Barrier to Access to Mandibular Advancement Device Therapy for Patients with Obstructive Sleep Apnea Syndrome in France.

Directory of Open Access Journals (Sweden)

Marion Fleury

Full Text Available Obstructive sleep apnea syndrome (OSAS is a major public health problem which affects between 5 to 10% of the general population. OSAS is known to be associated with high rates of morbidity and mortality mainly due to cardiovascular diseases and traffic accidents. The burden of illness is high for the individual and society. There are 2 treatment options for OSAS, Continuous Positive Airway Pressure (CPAP and Mandibular Advancement Device therapy (MAD. CPAP is known to be an effective but very constraining treatment. Patients are usually poorly adherent. MAD is a more recent treatment easier to use and consequently better tolerated, but MAD can only be prescribed to patients with satisfactory oral hygiene. Oral health constitutes a real issue particularly among underprivileged groups in France. Through this link, the question of whether low socio-economic status constitutes a barrier to access to care for patients with OSAS is raised.In a multicenter prospective cohort of 2822 consecutive OSAS patients in whom MAD has been proposed as an alternative to CPAP between May 15, 2007 and December 1st, 2014, we identified the factors that lead to a patient diagnosed with OSAS to be treated by MAD instead of CPAP. A logistic regression was performed using a stepwise forward procedure. The main outcome of the study was that treatment by MAD was significantly associated with both educational attainment, as determined by the age at which the patient left full-time education, ≥18 years compared with <18 (adjusted odds ratio (aOR: 1.64, 95% CI 1.23 to 2.20, and the patient's occupational category. Executives and higher intellectual professions, intermediate professions, technicians, foremen and employees were significantly more likely to be treated by MAD than workers (aOR: 2.21, 95% CI 1.88 to 2.58; aOR: 1.74, 95% CI 1.15 to 2.63; aOR: 1.96, 95% CI 1.11 to 3.47, respectively.Overall, these results suggest that low socio-economic status constitutes a

Advanced High Voltage Power Device Concepts

CERN Document Server

Baliga, B Jayant

2012-01-01

Advanced High Voltage Power Device Concepts describes devices utilized in power transmission and distribution equipment, and for very high power motor control in electric trains and steel-mills. Since these devices must be capable of supporting more than 5000-volts in the blocking mode, this books covers operation of devices rated at 5,000-V, 10,000-V and 20,000-V. Advanced concepts (the MCT, the BRT, and the EST) that enable MOS-gated control of power thyristor structures are described and analyzed in detail. In addition, detailed analyses of the silicon IGBT, as well as the silicon carbide MOSFET and IGBT, are provided for comparison purposes. Throughout the book, analytical models are generated to give a better understanding of the physics of operation for all the structures. This book provides readers with: The first comprehensive treatment of high voltage (over 5000-volts) power devices suitable for the power distribution, traction, and motor-control markets;  Analytical formulations for all the device ...

Efectos de los aparatos propulsores mandibulares fijos en la articulación temporomandibular

OpenAIRE

Palomino-Gómez, Sandra Patricia [UNESP; Almeida, Kélei Mathias [UNESP; Melllo, Patricia Bicalho de [UNESP; Restrepo, Manuel [UNESP; Raveli, Dirceu Barnabé [UNESP

2014-01-01

Fixed mandibular propulsion appliances are an alternative for the treatment of Class II malocclusion in individuals with mandibular deficiency. Since they are fixed appliances, said devices keep the mandible in an anterior-forced position during rest and during all mandibular functions. When a propulsive appliance is used, the lower jaw is displaced forward and downward. This movement leads to a new position of the condyle, which can, ultimately affect the normal functioning of the temporoman...

Relationship between cervical vertebral maturation and mandibular growth.

Science.gov (United States)

Ball, Gina; Woodside, Donald; Tompson, Bryan; Hunter, W Stuart; Posluns, James

2011-05-01

The cervical vertebrae have been proposed as a method of determining biologic maturity. The purposes of this study were to establish a pattern of mandibular growth and to relate this pattern to the stages of cervical vertebral maturation. Cephalometric radiographs, taken annually from ages 9 to 18 years, were evaluated for 90 boys from the Burlington Growth Center, Toronto, Ontario, Canada. Mandibular lengths were measured from articulare to gnathion, and incremental growth was determined. Cervical vertebral maturation stages were assessed by using a 6-stage method. Advanced, average, and delayed maturation groups were established. The prepubertal mandibular growth minimum velocity occurred during cervical stages 1 through 4 (P = 0.7327). Peak mandibular growth velocity occurred most frequently during stage 4 in all 3 maturation groups, with a statistical difference in the average and delayed groups (P cervical stages 1 through 6 does not occur annually; time spent in each stage varies depending on the stage and the maturation group. Cervical vertebral maturation stages cannot accurately identify the mandibular prepubertal growth minimum and therefore cannot predict the onset of the peak in mandibular growth. The cervical vertebral maturation stages should be used with other methods of biologic maturity assessment when considering both dentofacial orthopedic treatment and orthognathic surgery. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Locating Mandibular Foramen in Children with Mandibular Retrognathism in Mixed Dentition

Directory of Open Access Journals (Sweden)

Mehrsa Paryab

2015-06-01

Full Text Available Background and aims. One of the most common reasons forthe inferior alveolar nerve block anesthesia failure is the variation in mandibular foramen location. The aim of this study was to assess the location of mandibular foramen in chil-dren with mandibular retrognathism in comparison to children with normal skeletal occlusion in the mixed dentition. Materials and methods. One hundred and twenty panoramic radiographs of patients in mixed dentition period, undergo-ing orthodontic treatment, were selected based on inclusion criteria, skeletal occlusion and stage of dental development. The radiographs were divided into two groups: I: 60 panoramic radiographs of patients with normal skeletal occlusion (15 in each of the Hellman dental age stages; II: 60 panoramic radiographs of patients with mandibular retrognathism (15 in each of the Hellman dental age stages. The radiographs were traced and the linear distance from the mandibular foramen to the borders of the mandibular ramus and its angular position were identified. The measurements were compared between the two groups and among the four dental age groups by t-test, ANOVA and post hoc tests. Results. No statistically significant differences werefound between the patients with normal skeletal occlusion and patients with mandibular retrognathism (P>0.05. Statistical tests showed significant differences in the vertical location of mandibu-lar foramen and gonial angle between the four dental age groups (P<0.05. Conclusion. Mandibular retrognathism does not have a significant impact on the location of the mandibular foramen in the mixed dentition period. The child’s dental age would be considered in the localization of the mandibular foramen.

Hard and Soft Tissue Changes Following Maxillary Distraction Osteogenesis and Mandibular Setback with Bilateral Sagittal Split Osteotomy.

Science.gov (United States)

Bawane, Shilpa S; Andrade, Neelam N

2016-12-01

(1) To highlight the role of intraoral submerged device in distraction osteogenesis (DO) of patients requiring two jaw surgeries for the correction of severe developmental maxillary hypoplasia (MH) and mandibular prognathism (MP) (2) To analyse the hard and soft tissue changes following maxillary DO and mandibular setback with bilateral sagittal split osteotomy (BSSO) in patients with severe MH and MP requiring two jaw surgeries. During the period Jan 2004 to Dec 2006, five patients with severe developmental MH along with MP were treated. In 1st stage maxillary distraction was done. Distraction started on 6th postoperative day, 1 mm distraction was carried out for 10-15 days on either side. Serial radiographs were taken immediate postoperative period for baseline comparison, post-distraction and at the end of distraction. After a period of 3-4 months of distraction 2nd stage was done. In 2nd stage, mandibular setback was done with BSSO and distractors were removed under general anesthesia. Radiographs were taken immediately and at 4 months post-operatively. Cephalometric tracings were carried out preoperatively, post DO and finally after mandibular setback with BSSO. The mean horizontal movement of maxilla was 11.4 mm at ANS and 9.6 mm at A point. Upper incisor edge was advanced by 8.8 mms. SNA increased by 8.4° and SNB decreased by 4.6°. Nasal projection advanced by 4°. Nasolabial angle normalized in all patients, mean change achieved was 10.8°. Upper lip moved forward by 5.4 mm. Lower lip moved backward by 5.4 mm. Mandible positioned backward by 4 mm at B point. No vertical change occurred in the position of A, ANS and upper incisor edges. Mean increase in skeletal angle of convexity was 26.4°. Concave profile was significantly changed to convex in all patients. Maxillary DO and mandibular setback with BSSO was associated with improved facial balance and esthetics.

Computerized tomography of the mandibular joints and masticatory muscles

International Nuclear Information System (INIS)

Huels, A.B.

1981-01-01

A methodology for computerized tomography of the mandibular joints was developed and applied in 80 test persons. Imaging of the mandibular joints is possible with a tomographic technique with 5 mm-overlap, full utilisation of the enlargement capacity of the imaging device, and combined use of transversal and coronary tomography. The method yields full latero-medial, cranio-caudal and anterior-posterior views of the condyle and fossa contours, free of interferences and of distortions caused by the projection. Positional diagnoses are thus possible as well as diagnoses of pathological structural changes. (orig./MG) [de

Combined surgical management of mandibular angle prominence and microgenia

International Nuclear Information System (INIS)

Portelles Masso, Ayelen Maria; Berger Kohn, Carlos

2010-01-01

Chin play a very important role in facial aesthetics. Different deformities of volume and of position may occur at this level and it is the microgenia one of the more frequent. Treatment options include the use of silicone, alloplasty materials and autologous bone graft. Authors report the use of the bone removed from mandibular angle to increase the chin. This is the case of a white female patient aged 18 seen by the Orthognathics Multidisciplinary Staff of 'V. I. Lenin' Hospital due to its uncommon face width. The corresponding physical examination as well as the complementary ones diagnosed a bilateral prominence of mandibular angle associated with a microgenia. Surgery carried out was of remodeling type of both mandibular angles and genioplasty of height increase and a discrete advancement using the bone removed from the gonion. There were satisfactory aesthetic results without evidence of bone reabsorption. We conclude that use of autologous graft of mandibular angle is an effective treatment alternative for correction of microgenia. (author)

Thin-plate spline graphical analysis of the mandible in mandibular prognathism.

Science.gov (United States)

Chang, Hsin-Fu; Chang, Hong-Po; Liu, Pao-Hsin; Chang, Chih-Han

2002-11-01

The chin cup has been used to treat skeletal mandibular prognathism in growing patients for 200 years. The pull on the orthopedic-force chin cup is oriented along a line from the mandibular symphysis to the mandibular condyle. Various levels of success have been reported with this restraining device. The vertical chin cup produces strong vertical compression stress on the maxillary molar regions when the direction of traction is 20 degrees more vertical than the chin-condyle line. This treatment strategy may prevent relapse due to counter-clockwise rotation of the mandible. In this report, we describe a new strategy for using chin-cup therapy involving thin-plate spline (TPS) analysis of lateral cephalometric roentgenograms to visualize transformation of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. A case of mandibular prognathism treated with a chin cup and a case of dental Class III malocclusion without orthodontic treatment are described. The case analysis illustrates that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopedic therapy, and that visualization of these deformations is feasible using TPS graphical analysis.

Radiologic study of mandibular foramen of mandibular prognathism by three-dimensional computed tomography

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Hun; Moon, Cheol Hyun; Im, Jeong Soo; Seo, Hwa Jeong [Graduate School of Public Health and Social Welfare, Gachon University of Medicine and Science, Incheon (Korea, Republic of)

2010-06-15

This study is aimed to evaluate the position of mandibular foramen of mandibular prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. Thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

Radiologic study of mandibular foramen of mandibular prognathism by three-dimensional computed tomography

International Nuclear Information System (INIS)

Lee, Seung Hun; Moon, Cheol Hyun; Im, Jeong Soo; Seo, Hwa Jeong

2010-01-01

This study is aimed to evaluate the position of mandibular foramen of mandibular prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. Thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

Adolescents' Use of Basic, Intermediate, and Advanced Device Types for Vaping.

Science.gov (United States)

Pepper, Jessica K; MacMonegle, Anna J; Nonnemaker, James M

2017-12-23

Advanced models of electronic vaping products (EVPs) likely pose a greater risk to adolescent health than basic or intermediate models because advanced models deliver nicotine more effectively and heat e-liquid to higher temperatures, producing more harmful chemical emissions. However, little is known about adolescents' risk factors for using different device types. We used social media to recruit an online sample of 1,508 U.S. adolescents aged 15-17 who reported past 30-day use of e-cigarettes. We assessed tobacco use, beliefs and knowledge about EVPs, and EVP use behavior, including the device type participants use most frequently. We used multinomial logistic regression to examine differences between adolescents who usually use intermediate versus basic and advanced versus basic devices. Most respondents usually used modifiable advanced devices (56.8%) rather than basic "cigalike" (14.5%) or pen-style intermediate (28.7%) devices. Use of multiple device types was common, particularly among those who primarily used basic devices. Younger age and less frequent vaping were associated with mainly using basic devices. Adolescents who were older, male, personally bought their main device, and had ever mixed e-liquids were at elevated risk for usually using advanced devices. Adolescents who primarily use basic devices may be newer users who are experimenting with multiple devices. Future research should examine which adolescents are most likely to transition to advanced devices in order to develop targeted interventions. Regulators should consider strategies to reduce access to all types of EVPs, such as better enforcement of the current ban on sales to minors. This research addresses two gaps in research on adolescent electronic vaping product use: (1) characterizing use of advanced devices as distinct from intermediate devices rather than grouping them together and (2) examining factors associated with use of specific device types. This study suggests that there

Recent advances in insertion devices

International Nuclear Information System (INIS)

Gluskin, E.; Moog, E.R.

1995-01-01

Demand for more and better insertion devices (IDs) at new third-generation synchrotron radiation facilities has led to significant advances in ID technology at different laboratories around the world. In this overview of this progress, focus is on those results that apply to IDs in general rather than one specific ID or laboratory. The advances fall into two general categories: those that reduce the net effect that the ID has on the particle beam, and those that enhance the quality of the emitted light spectrum. The need for these advances, factors that are most important inaachieving them, and the current state of the art are discussed

Evaluation of soft-tissue artifacts when using anatomical and technical markers to measure mandibular motion

Directory of Open Access Journals (Sweden)

Chien-Chih Chen

2011-06-01

Conclusions: It appears that markers on the frontal nose bridge are good alternatives to transoral rigid devices for measuring mandibular motion, compared to optical frame markers and other skin markers on the face. The results of the current study will be helpful for establishing guidelines for marker placement when measuring mandibular movements in patients with potential temporomandibular disorders.

Insertion devices at the advanced photon source

International Nuclear Information System (INIS)

Moog, E.R.

1996-01-01

The insertion devices being installed at the Advanced Photon Source cause the stored particle beam to wiggle, emitting x-rays with each wiggle. These x-rays combine to make an intense beam of radiation. Both wiggler and undulator types of insertion devices are being installed; the characteristics of the radiation produced by these two types of insertion devices are discussed, along with the reasons for those characteristics

A Prototype for the Acquisition and Analysis of the 3D Mandibular Movement

OpenAIRE

Santos, Isa C.T.; Tavares, João Manuel R. S.; Mendes, Joaquim G.; Paulo, Manuel P. F.

2007-01-01

In Dental Medicine is essential to know the mandibular cinematic to simulate the temporomandibular joints, to position teeth moulds in articulators, and to reproduce the mandibular movements in order to insure a satisfactory occlusion. Currently, both commercial and custom made devices are considered expensive and difficult to use in common clinical situations. Considering these disadvantages, it was developed a new system for the acquisition, visualization and analysis of the 3D mandibula...

The effects of orthognathic surgery on mandibular movements in patients with mandibular prognathism

Directory of Open Access Journals (Sweden)

Sinobad Vladimir

2012-01-01

Full Text Available Introduction. Mandibular prognathism, one of the most severe dentofacial deformities, affects the person’s appearance, psychological health and the quality of life in the most sensitive age period. Objective. The aim of this study was to evaluate the effects of sagittal split ramus osteotomy on the range of mandibular border movements in the early postoperative period. Methods. The study was conducted on 20 patients, of mean age 20.8 years, with mandibular prognathism. All patients included in this study were operated on by bilateral sagittal spliting ramus osteotomy according to Obwegeser and Dal Pont followed by mandibular immobilization during eight weeks. In all patients mandibular border movements were recorded before and six months after surgery using the computerized pantograph Arcus-Digma (KaVo EWL GmbH, Leutkirch, Germany. Results. The analysis of the chosen kinematic parameters revealed that sagittal split ramus osteotomy followed by eight weeks of mandibular immobilization had severe effects on the mouth opening. Six months after surgery the range of maximal mouth opening decreased for approximately 13.9 mm in relation to the preoperative stage. On the contrary, the ranges of maximal protrusion and the border of laterotrusive excursions increased significantly after surgery. Conclusion. In patients with mandibular prognathism where enormous mandibular growth was the main causal factor of the deformity, the sagittal split ramus osteotomy yielded good results. The rigid fixation of bone fragments and reduced period of mandibular immobilization followed by appropriate physical therapy could considerably contribute to a more rapid recovery of mandibular kinematics in the postoperative period.

COMPUTER-AIDED OPTIMIZATION OF CHOICE AND POSITIONING OF BONE PLATES AND SCREWS USED FOR INTERNAL-FIXATION OF MANDIBULAR FRACTURES

NARCIS (Netherlands)

ROZEMA, FR; BOS, RRM; BOERING, G; VANWILLIGEN, JD

1992-01-01

The present study describes a biomechanical integrated model of the mandibular system in which the maxilla and mandible, the masticatory muscles, and the temporomandibular joints are regarded as one system. In this model, strains in plate-osteosynthesis devices for internal fixation of mandibular

Computer-assisted preoperative simulation for positioning and fixation of plate in 2-stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery.

Science.gov (United States)

Suenaga, Hideyuki; Taniguchi, Asako; Yonenaga, Kazumichi; Hoshi, Kazuto; Takato, Tsuyoshi

2016-01-01

Computer-assisted preoperative simulation surgery is employed to plan and interact with the 3D images during the orthognathic procedure. It is useful for positioning and fixation of maxilla by a plate. We report a case of maxillary retrusion by a bilateral cleft lip and palate, in which a 2-stage orthognathic procedure (maxillary advancement by distraction technique and mandibular setback surgery) was performed following a computer-assisted preoperative simulation planning to achieve the positioning and fixation of the plate. A high accuracy was achieved in the present case. A 21-year-old male patient presented to our department with a complaint of maxillary retrusion following bilateral cleft lip and palate. Computer-assisted preoperative simulation with 2-stage orthognathic procedure using distraction technique and mandibular setback surgery was planned. The preoperative planning of the procedure resulted in good aesthetic outcomes. The error of the maxillary position was less than 1mm. The implementation of the computer-assisted preoperative simulation for the positioning and fixation of plate in 2-stage orthognathic procedure using distraction technique and mandibular setback surgery yielded good results. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

A retrospective cephalometric investigation of two fixed functional orthodontic appliances in class II treatment: Functional Mandibular Advancer vs. Herbst appliance.

Science.gov (United States)

Kinzinger, Gero Stefan Michael; Lisson, Jörg Alexander; Frye, Linda; Gross, Ulrich; Hourfar, Jan

2018-01-01

The objective of the study is to compare skeletal and dental changes in class II patients treated with fixed functional appliances (FFA) that pursue different biomechanical concepts: (1) FMA (Functional Mandibular Advancer) from first maxillary molar to first mandibular molar through inclined planes and (2) Herbst appliance from first maxillary molar to lower first bicuspid through a rod-and-tube mechanism. Forty-two equally distributed patients were treated with FMA (21) and Herbst appliance (21), following a single-step advancement protocol. Lateral cephalograms were available before treatment and immediately after removal of the FFA. The lateral cephalograms were analyzed with customized linear measurements. The actual therapeutic effect was then calculated through comparison with data from a growth survey. Additionally, the ratio of skeletal and dental contributions to molar and overjet correction for both FFA was calculated. Data was analyzed by means of one-sample Student's t tests and independent Student's t tests. Statistical significance was set at p appliance were found, intergroup comparisons showed no statistically significant differences. Almost all measurements resulted in comparable changes for both appliances. Statistically significant dental changes occurred with both appliances. Dentoalveolar contribution to the treatment effect was ≥70%, thus always resulting in ≤30% for skeletal alterations. FMA and Herbst appliance usage results in comparable skeletal and dental treatment effects despite different biomechanical approaches. Treatment leads to overjet and molar relationship correction that is mainly caused by significant dentoalveolar changes.

Advanced mechatronics and MEMS devices II

CERN Document Server

Wei, Bin

2017-01-01

This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intel...

3-D diagnosis-assisted management of anomalous mandibular molar

Directory of Open Access Journals (Sweden)

Neelam Mittal

2012-01-01

Full Text Available This case report describes the successful non-surgical endodontic management of carious exposed three-rooted mandibular molar with four root canals detected on the pre-operative radiograph taken with 20 degrees mesial angulation and confirmed with a 64-slice helical computed tomography scan-assisted 3-D-reconstructed images. Access cavity shape was modified to locate the extra canal with respect to the distolingual root in the left mandibular first molar. Copious irrigation was accomplished with 5.25% sodium hypochlorite and 17% EDTA. Biomechanical preparation was done using protapers. Calcium hydroxide dressing was done for 1 week. The tooth was obturated using gutta percha and AH 26 root canal sealer, and it was permanently restored with composite. Clinical examination on follow-up visits revealed no sensitivity to percussion and palpation in the left mandibular first molar. Thorough knowledge of root canal variations and use of advanced diagnostic modalities lead to successful non-surgical management of the complex cases.

Distracción mandibular y articulación temporomandibular Mandibular distraction and the temporomandibular joint

Directory of Open Access Journals (Sweden)

F. Monje Gil

2004-08-01

Full Text Available Los pacientes con deformidades craneofaciales requieren generalmente multiples y, a veces, complejos procedimientos quirurgicos para reconstruir tejidos blandos y duros alterados. Un avance importante en cirugía reconstructiva es el alargamiento de la mandibula por distracción que tiene la ventaja de una cirugía menos agresiva que determinados tipos de osteotomías. Con esta técnica una osteotomía bicortical se hace en distintas zonas de la mandibula colocandose el distractor hasta alcanzar los efectos deseados. Aunque las fuerzas aplicadas se han mostrado eficaces para alargar la mandíbula, sus efectos en segmentos proximales y distales, incluyendo la articulación temporomandibular no han sido analizados sistemáticamente. En este artículo se repasa trabajos experimentales y clínicos en los que se detalla la relación entre distracción mandibular y articulación temporomandibular.Abstract: Patients with severe craniofacial abnormalities often require multiple and complex surgical procedures to reconstruct maldeveloped hard and soft tissues of the maxillofacial complex. An important advance in reconstructive surgery is mandibular lengthening by gradual distraction, which takes advantage to be less agressive surgery than some osteotomies. With this technique, a bicortical osteotomy is made at the angle of the deficient mandible, and an expansion appliance is placed across the osteotomy line. Although the applied forces have been shown to lengthen the mandible effectively in the region of the application, their effects on the proximal and distal mandibular segments, including the temporomandibular joint region, have not been analyzed systematically. In this article, we study several experimental and clinical papers where it describes the relationship between mandibular distraction and temporomandibular joint.

Mandibular tori are associated with mechanical stress and mandibular shape.

Science.gov (United States)

Cortes, Arthur Rodriguez Gonzalez; Jin, Zhaoyu; Morrison, Matthew Daniel; Arita, Emiko Saito; Song, Jun; Tamimi, Faleh

2014-11-01

The influence of mechanical stimulation on the formation of torus mandibularis (TM) is still poorly understood. We sought to understand the etiology of TMs by investigating the role of parafunctional activity and mandibular morphology on the formation of TMs. We designed a case-control study for patients attending the dental clinic of the present study (University of São Paulo School of Dentistry, São Paulo, SP, Brazil). Patients presenting with TMs were defined as cases, and those without TMs were defined as controls. Finite element analysis (FEA) was used in 3-dimensional mandibular models to examine the stress distribution in the mandibles with and without TMs. In addition, the associations of mandibular arch shape, mandibular cortical index, and parafunctional activity with the presence of T were assessed using odds ratio analysis. A total of 10 patients with TMs and 37 without TMs were selected (22 men and 25 women, mean age 54.3 ± 8.4 years). FEA showed a stress concentration in the region in which TMs form during simulation of parafunctional activity. The radiographic assessment showed that those with TMs were more likely to have a square-shaped mandible with sharp angles (P = .001) and a normal mandibular cortex (P = .03). The subjects without TMs had a round-shaped mandible with obtuse angles and an eroded mandibular cortex. Parafunctional activity could be causing the formation of TMs by concentrating mechanical stress in the region in which TMs usually form. Thus, mandibular geometries that favor stress concentration, such as square-shaped mandibles, will be associated with a greater prevalence of TMs. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Mandibular marginal contouring in oriental aesthetic surgery: refined surgical concept and operative procedure.

Science.gov (United States)

Satoh, Kaneshige; Mitsukawa, Nobuyuki

2014-05-01

In aesthetic mandibular contouring surgery, which is often conducted in Asians, the operative procedure is thought to deliver a more aesthetic mandibular shape by means of contouring conducted as a whole from the ramus to the symphysis. The authors describe the refined concept and operative procedures of mandibular marginal contouring. For the 7-year period from 2004 to 2011, mandibular marginal contouring has been used in 57 consecutive series of Japanese subjects. Patient ages ranged from 18 to 33 years, and the subjects included 15 men and 42 women. The surgery was carried out by cutting off the protruding deformed mandibular margin from the ramus to the symphysis. In 53 of 57 cases, the focus was on angle contouring. Concomitant genioplasty by horizontal osteotomy of the chin was conducted in 42 of 57 cases (recession, advancement, shortening, elongation, and correction of the shift variously). In 22 materials exhibiting bulk around the mandibular, the ramus to the body was excised sagittally and thinned. In all the patients, mandibular marginal contouring from the ramus to the symphysis was completed. Partial masseter muscle resection was conducted in 11 of 57 cases. Mandibular contouring effectively achieved a highly satisfactory result in all cases. The upper portion of the peripheral branch of the trunk of the mental nerve was dissected by an electric scalpel in 1 case but sutured immediately using an 8-0 nylon stitch. Transient palsy of the mental nerve was noticed in a few cases but subsided in 1 to 2 months. No particular complications were encountered. No secondary revision was required in this series. In mandibular angle plasty, mandibular marginal contouring from the ramus to the symphysis should be carried out by cutting off the angle keeping in mind the entire mandibular shape. This concept and the procedure can deliver greater patient satisfaction.

Advanced Materials for Health Monitoring with Skin-Based Wearable Devices.

Science.gov (United States)

Jin, Han; Abu-Raya, Yasmin Shibli; Haick, Hossam

2017-06-01

Skin-based wearable devices have a great potential that could result in a revolutionary approach to health monitoring and diagnosing disease. With continued innovation and intensive attention to the materials and fabrication technologies, development of these healthcare devices is progressively encouraged. This article gives a concise, although admittedly non-exhaustive, didactic review of some of the main concepts and approaches related to recent advances and developments in the scope of skin-based wearable devices (e.g. temperature, strain, biomarker-analysis werable devices, etc.), with an emphasis on emerging materials and fabrication techniques in the relevant fields. To give a comprehensive statement, part of the review presents and discusses different aspects of these advanced materials, such as the sensitivity, biocompatibility and durability as well as the major approaches proposed for enhancing their chemical and physical properties. A complementary section of the review linking these advanced materials with wearable device technologies is particularly specified. Some of the strong and weak points in development of each wearable material/device are highlighted and criticized. Several ideas regarding further improvement of skin-based wearable devices are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Radiological study of the mandibular fractures

Energy Technology Data Exchange (ETDEWEB)

Kim, Ju Won; Kim, Kyoung A; Koh, Kwang Jun [Department of Oral and Maxillofacial Radiology, School of Dentistry, and Institute of Oral Bio Science, Chonbuk National University, Jeonju (Korea, Republic of)

2009-06-15

To classify and evaluate mandibular fractures. The author classified mandibular fractures of 284 patients who were referred to the Chonbuk National University Dental Hospital during the period from March 2004 to June 2007. This study was based on the conventional radiographs as well as computed tomographs which were pertained to the 284 patients who have had the mandibular fractures including the facial bone fractures. And mandibular fractures were classified with respect to gender, age, site and type of the fractures. More frequently affected gender with mandibular fracture was male with the ratio of 3.3 : 1. The most frequently affected age with mandibular fracture was third decade (38%), followed by fourth decade (16%), second decade (15%), fifth decade (11%), sixth decade (7%), seventh decade (5%), eighth decade (4%), first decade (4%), and ninth decade (0.3%). The most frequent type of mandibular fracture was single fracture (58%), followed by double fracture (39%), triple fracture (3%). The most common site of mandibular fracture was mandibular condyle as 113 cases (27.7%) and the next was mandibular symphysis as 109 cases (26.7%), mandibular angle as 103 cases (25.3%), mandibular body as 83 cases (20.3%) in order. The sum of fracture sites were 408 sites and there were 1.4 fracture sites per one patient. The number of mandible fractures accompanied with facial bone fractures were 41 cases (14.4%). The results showed the most frequent type and common site of mandibular fracture was single fracture and mandibular condyle respectively.

Radiological study of the mandibular fractures

International Nuclear Information System (INIS)

Kim, Ju Won; Kim, Kyoung A; Koh, Kwang Jun

2009-01-01

To classify and evaluate mandibular fractures. The author classified mandibular fractures of 284 patients who were referred to the Chonbuk National University Dental Hospital during the period from March 2004 to June 2007. This study was based on the conventional radiographs as well as computed tomographs which were pertained to the 284 patients who have had the mandibular fractures including the facial bone fractures. And mandibular fractures were classified with respect to gender, age, site and type of the fractures. More frequently affected gender with mandibular fracture was male with the ratio of 3.3 : 1. The most frequently affected age with mandibular fracture was third decade (38%), followed by fourth decade (16%), second decade (15%), fifth decade (11%), sixth decade (7%), seventh decade (5%), eighth decade (4%), first decade (4%), and ninth decade (0.3%). The most frequent type of mandibular fracture was single fracture (58%), followed by double fracture (39%), triple fracture (3%). The most common site of mandibular fracture was mandibular condyle as 113 cases (27.7%) and the next was mandibular symphysis as 109 cases (26.7%), mandibular angle as 103 cases (25.3%), mandibular body as 83 cases (20.3%) in order. The sum of fracture sites were 408 sites and there were 1.4 fracture sites per one patient. The number of mandible fractures accompanied with facial bone fractures were 41 cases (14.4%). The results showed the most frequent type and common site of mandibular fracture was single fracture and mandibular condyle respectively.

Cone Beam Computed Tomographic Evaluation and Diagnosis of Mandibular First Molar with 6 Canals

Directory of Open Access Journals (Sweden)

Shiraz Pasha

2016-01-01

Full Text Available Root canal treatment of tooth with aberrant root canal morphology is very challenging. So thorough knowledge of both the external and internal anatomy of teeth is an important aspect of root canal treatment. With the advancement in technology it is imperative to use modern diagnostic tools such as magnification devices, CBCT, microscopes, and RVG to confirm the presence of these aberrant configurations. However, in everyday endodontic practice, clinicians have to treat teeth with atypical configurations for root canal treatment to be successful. This case report presents the management of a mandibular first molar with six root canals, four in mesial and two in distal root, and also emphasizes the use and importance of Cone Beam Computed Tomography (CBCT as a diagnostic tool in endodontics.

Handbook on advanced design and manufacturing technologies for biomedical devices

CERN Document Server

2013-01-01

The last decades have seen remarkable advances in computer-aided design, engineering and manufacturing technologies, multi-variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and resu...

Effects of mandibular setback with or without maxillary advancement osteotomies on pharyngeal airways: An overview of systematic reviews.

Directory of Open Access Journals (Sweden)

Su Keng Tan

Full Text Available Mandibular setback osteotomies potentially lead to narrowing of the pharyngeal airways, subsequently resulting in post-surgical obstructive sleep apnea (OSA.To summarize current evidence from systematic reviews that has evaluated pharyngeal airway changes after mandibular setback with or without concomitant upper jaw osteotomies.PubMed, EMBASE, Web of Science, and Cochrane Library databases were searched with no restriction of language or date. Systematic reviews studying changes in pharyngeal airway dimensions and respiratory parameters after mandibular setback with or without concomitant upper jaw osteotomies have been identified, screened for eligibility, included and analyzed in this study.Six systematic reviews have been included. While isolated mandibular setback osteotomies result in reduced oropharyngeal airway dimensions, the reduction is lesser in cases with concomitant upper jaw osteotomies. Only scarce evidence exists currently to what happens to naso- and hypo-pharyngeal airways. There is no evidence for post-surgical OSA, even though some studies reported reduced respiratory parameters after single-jaw mandibular setback with or without concomitant upper jaw osteotomies.Although mandibular setback osteotomies reduce pharyngeal airway dimensions, evidence confirming post-surgical OSA was not found. Nevertheless, potential post-surgical OSA should be taken into serious consideration during the treatment planning of particular orthognathic cases. As moderate evidence exists that double-jaw surgeries lead to less compromised post-surgical pharyngeal airways, they should be considered as the method of choice especially in cases with severe dentoskeletal Class III deformity.PROSPERO (registration number: CRD42016046484.

[Orthodontic Management of the Impacted Mandibular Second Molar Tooth].

Science.gov (United States)

Mah, Michael; Takada, Kenji

2016-09-01

When the mandibular permanent second molar becomes impacted, it is identified as a malocclusion that needs treatment as it often leads to unwanted complications such as caries and periodontitis of the adjacent permanent first molar. Other less common complications include root resorption of the adjacent first molar root or continued root development to be in close proximity to the inferior dental alveolar nerve. This paper seeks to differentiate various levels of severity of impaction and review treatment options that are considered clinically available for the proper management of the impacted mandibular permanent second molar. Treatment options that will be discussed in this article include timing of second molar removal for replacement by the third molar, relief of impaction via second premolar removal, surgical repositioning and the combination of third molar removal, surgical exposure and orthodontic uprighting of the impacted tooth. Depending on the severity of the impaction, most impactions can be easily and predictably corrected with nickel titanium archwires or auxillary open coil springs or uprighting springs. Uncommonly, the mandibular permanent second molar can become severely impacted and in close proximity to the inferior dentoalveolar nerve. In these instances, the use of temporary anchorage devices such as microimplants has shown to be successful in uprighting the severely impacted mandibular permanent second molars. © EDP Sciences, SFODF, 2016.

The correction of maxillary defciency with internal distraction devices: a multidisciplinary approach.

Science.gov (United States)

Oz, A Alper; Ozer, Mete; Eroglu, Lütfi; Ozdemir, Oguz Suleyman

2013-09-01

The purpose of this case report is to present the orthodontic, surgical and restorative treatments in the case of an operated cleft lip and palate and severe maxillary defciency in a 14-year-old female patient. Only orthodontic treatment could be ineffcient for cleft lip and palate patients characterized with maxillary hypoplasia. Orthodontic and surgical treatment shows suffcient results, especially with severe skeletal defciency. A cleft lip and palate patient required complex multidisciplinary treatment to preserve health and restore esthetics. Dental leveling and alignment of the maxillary and mandibular teeth were provided before the surgery. Maxillary advancement and clockwise rotation of the maxillary-mandibular complex was applied by a Le Fort 1 osteotomy with two internal distraction devices. After the active treatment including orthodontic treatment and orthognathic surgery, upper full mouth ceramic restoration was applied. This report shows the efficiency of internal distraction devices in cleft lip palate patients and exemplifes the multidisciplinary care required for such diffcult cases. Clinical signifcance: Stable improved occlusion and skeletal relations were observed after a follow-up examination period of 12 months.

Observation of horizontal mandibular positions in an edentulous patient using a digital gothic arch tracer: a clinical report.

Science.gov (United States)

Watanabe, Yoshiyuki

2004-01-01

Dentures were fabricated for a 73-year-old woman using porcelain 20-degree maxillary posterior teeth and acrylic resin flat planes in the mandibular posterior region. A digital gothic arch tracing device was used to observe the horizontal mandibular positions before insertion and to evaluate the therapeutic effect of the diagnostic dentures at 1 and 3 months after insertion.

Bite force and sleep quality in patients with bruxism before and after using a mandibular advancement device = Força de mordida e qualidade do sono em pacientes bruxômanos antes e após o uso de placa de avanço mandibular

Directory of Open Access Journals (Sweden)

Mainieri, Vivian Chiada

2008-01-01

Full Text Available Objetivo: Comparar a força de mordida e a qualidade do sono em pacientes com bruxismo antes e depois do uso de uma placa de avanço mandibular resiliente. Metodologia: Dezoito pacientes com bruxismo em atendimento na Clínica de Oclusão da Faculdade de Odontologia da PUCRS foram selecionados de acordo com os critérios de eligibilidade do estudo, examinados segundo o protocolo RDC/DTM e tratados com uma placa de avanço mandibular resiliente. Antes e após 30 dias de uso da placa de avanço mandibular os sujeitos foram submetidos a testes de força máxima de mordida com um transdutor de força compressiva de arco cruzado posicionado na região de primeiro molar; de qualidade do sono, de acordo com o questionário QAS da Universidade de Toronto; e de contagem do número de contrações do músculo masseter durante o sono usando-se o adesivo BiteStrip®. Os dados foram analisados por teste t de Student, teste de Wilcoxon e teste de McNemar ao nível de significância de 0,05. Resultados: Houve diminuição significativa (P < 0,05 dos parâmetros de bruxismo, de força de mordida e do escore total do QAS após o uso da placa de avanço mandibular por 30 dias. Conclusão: Os resultados sugerem que o uso da placa de avanço mandibular resiliente por um mês reduziu a força de mordida e o bruxismo e melhorou a qualidade do sono nesta amostra

Roentgenographic study of the mandibular canal

International Nuclear Information System (INIS)

Ahn, Hyung Kyu

1980-01-01

The mandibular canal must be considered carefully during the surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant, because it contains the important inferior alveolar nerve and vessels. The author investigated the curvature of the mandibular canal and its relation to the mandibular molars and positional relation between the mental foramen and the mandibular premolars in orthopantomogram. The materials consisted of 441 orthopantomograms divided four groups; Group I consisted of 56 males and 44 females from 1 to 6 years of age, Group II consisted of 58 males and 45 females from 7 to 12 years of age, Group III consisted of 65 males and 33 females from 13 to 18 years of age, Group IV consisted of 86 males and 54 females over 19 years of age. The results were as followings; 1. The curvature of mandibular canal was 144.50 .deg. in Group II, 148.11 .deg. in Group III, 147.33 .deg. in Group IV. 2. The curvature of mandibular canal was located most frequently on the area between mandibular 1st molar and mandibular 2nd molar in Group I (42%) and on the mandibular 2nd molar area in Group II (54%), Group III (59%), Group IV (53%). 3. The position of mental foramen was most frequently below the mandibular 1st premolar in Group I (58%), between the mandibular 1st premolar and the 2nd premolar in Group II (62%), Group III (47%), and below the mandibular 2nd premolar in Group IV (58%).

Complaints related to mandibular function impairment after closed treatment of fractures of the mandibular condyle

NARCIS (Netherlands)

Niezen, E. T.; Bos, R. R. M.; de Bont, L. G. M.; Stegenga, B.; Dijkstra, P. U.

This study analysed the relationship between complaints and mandibular function after closed treatment of fractures of the mandibular condyle in a prospective study. In a I-year follow-up, complaints were assessed during physical examination and function was assessed using the mandibular function

[Mandibular-driven simultaneous maxillo-mandibular distraction for hemifacial microsomia with rapid prototyping technology].

Science.gov (United States)

Gao, Quan-Wen; Song, Hui-Feng; Xu, Ming-Huo; Liu, Chun-Ming; Chai, Jia-Ke

2013-11-01

To explore the clinical application of mandibular-driven simultaneous maxillo-mandihular distraction to correct hemifacial microsomia with rapid prototyping technology. The patient' s skull resin model was manufactured with rapid prototyping technology. The osteotomy was designed on skull resin model. According to the preoperative design, the patients underwent Le Fort I osteotomy and mandibular ramus osteotomy. The internal mandible distractor was embedded onto the osteotomy position. The occlusal titanium pin was implanted. Distraction were carried out by mandibular-driven simultaneous maxillo-mandihular distraction 5 days after operation. The distraction in five patients was complete as designed. No infection and dysosteogenesis happened. The longest distance of distraction was 28 mm, and the shortest distance was 16 mm. The facial asymmetry deformity was significantly improved at the end of distraction. The ocelusal plane of patients obviously improved. Rapid prototyping technology is helpful to design precisely osteotomy before operation. Mandibular-driven simultaneous maxillo-mandibular distraction can correct hemifacial microsomia. It is worth to clinical application.

Impact of balancing-side tooth contact on clenching induced mandibular displacements in humans.

Science.gov (United States)

Baba, K; Yugami, K; Yaka, T; Ai, M

2001-08-01

This study investigated mandibular displacements during clenching in the lateral mandibular position in relation to lateral occlusal relationships. Twelve healthy human subjects (mean=26.7 years) volunteered for this study. Acrylic occlusal devices were fabricated for the lower working-side canine, working-side second molar and balancing-side second molar in order to simulate a dominant canine guidance, working-side interference (WI), balancing-side interference (BI) and bilateral balanced occlusion (BO). Vertical displacements of the mandible were recorded by linear variable differential transformers during submaximal clenching in the right lateral position. The four experimental occlusal conditions were revealed to have a significant effect on mandibular displacement patterns (ANOVA, P experimental conditions. These results suggest that the nature of reaction forces at the temporomandibular (TM) joints caused by the elevation of the mandible varies in a predictable manner depending upon lateral occlusal relationships.

Guidewire-Controlled Advancement of the Amplatz Thrombectomy Device

International Nuclear Information System (INIS)

Mueller-Huelsbeck, Stefan; Schwarzenberg, Helmut; Heller, Martin

1998-01-01

The Amplatz Thrombectomy Device (ATD) is a percutaneous rotational catheter proven to homogenize thrombus. The catheter design allows neither application over a coaxial running guidewire nor the use of the device as a monorail system. We report a technical modification that provides guided advancement of the catheter over a wire in order to prevent failure of application and to facilitate the interventional procedure

Radiological classification of mandibular fractures

International Nuclear Information System (INIS)

Mihailova, H.

2009-01-01

Mandibular fractures present the biggest part (up to 97%) of the facial bone fractures. Method of choice for diagnosing of mandibular fractures is conventional radiography. The aim of the issue is to present an unified radiological classification of mandibular fractures for the clinical practice. This classification includes only those clinical symptoms of mandibular fracture which could be radiologically objectified: exact anatomical localization (F1-F6), teeth in fracture line (Ta,Tb), grade of dislocation (D I, D II), occlusal disturbances (O(+), O(-)). Radiological symptoms expressed by letter and number symbols are systematized in a formula - FTDO of mandibular fractures similar to TNM formula for tumours. FTDO formula expresses radiological diagnose of each mandibular fracture but it doesn't include neither the site (left or right) of the fracture, nor the kind and number of fractures. In order to express topography and number of fractures the radiological formula is transformed into a decimal fraction. The symbols (FTD) of right mandible fracture are written in the numerator and those of the left site - in the denominator. For double and multiple fractures between the symbols for each fracture we put '+'. Symbols for occlusal disturbances are put down opposite, the fractional line. So topographo-anatomical formula (FTD/FTD)xO is formed. In this way the whole radiological information for unilateral, bilateral, single or multiple fractures of the mandible is expressed. The information in the radiological topography anatomic formula, resp. from the unified topography-anatomic classification ensures a quick and exact X-ray diagnose of mandibular fracture. In this way contributes to get better, make easier and faster X-ray diagnostic process concerning mandibular fractures. And all these is a precondition for prevention of retardation of the diagnosis mandibular fracture. (author)

Advances in bioartificial liver assist devices.

Science.gov (United States)

Patzer, J F

2001-11-01

Rapid advances in development of bioartificial liver assist devices (BLADs) are exciting clinical interest in the application of BLAD technology for support of patients with acute liver failure. Four devices (Circe Biomedical HepatAssist, Vitagen ELAD, Gerlach BELS, and Excorp Medical BLSS) that rely on hepatocytes cultured in hollow-fiber membrane technology are currently in various stages of clinical evaluation. Several alternative approaches for culture and perfusion of hepatocytes have been evaluated in preclinical, large animal models of liver failure, or at a laboratory scale. Engineering design issues with respect to xenotransplantation, BLAD perfusion, hepatocyte functionality and culture maintenance, and ultimate distribution of a BLAD to a clinical site are delineated.

Studies on reproducible, three-dimensional radiography of the mandibular joint on the basis of the summation technique

International Nuclear Information System (INIS)

Lang, T.

1981-01-01

A positioning device is described and tested. In addition to individual, reproducible radiography of the mandibular joint, taken obliquely, also submento-vertical and posterior-anterior imaging of the skull, i.e. determination of the axial angle of the condyles is possible with this device. (orig./MG) [de

[Temporo-mandibular joint. Morpho-functional considerations].

Science.gov (United States)

Scutariu, M D; Indrei, Anca

2004-01-01

The temporo-mandibular joint is distinguished from most other synovial joints of the body by two features: 1. the two jointed components carry teeth whose position and occlusion introduce a very strong influence on the movements of the temporo-mandibular joint and 2. its articular surfaces are not covered by hyaline cartilage, but by a dense, fibrous tissue. This paper describes the parts of the temporo-mandibular joint: the articular surfaces (the condylar process of the mandible and the glenoid part of the temporal bone), the fibrocartilaginous disc which is interposed between the mandibular and the temporal surface, the fibrous capsule of the temporo-mandibular joint and the ligaments of this joint. All these parts present a very strong adaptation at the important functions of the temporo-mandibular joint.

Dislocation of the mandibular condyle into the middle cranial fossa causing an epidural haematoma.

Science.gov (United States)

Struewer, Johannes; Kiriazidis, Ilias; Figiel, Jens; Dukatz, Thomas; Frangen, Thomas; Ziring, Ewgeni

2012-07-01

Dislocation of the mandibular condyle into the middle cranial fossa is a rare complication of mandibular trauma due to anatomical and biomechanical factors. Owing to the proximity of the temporal glenoid fossa to the middle meningeal artery, there is the risk of serious sequelae in case of trauma. The authors report the case of a 36-year-old male patient, who was beaten up in a family dispute and presented with complex mandibular and maxillofacial fractures, including mandibular condyle intrusion into the middle cranial fossa causing extensive meningeal bleeding. The patient underwent immediate surgery, with evacuation of the epidural haematoma via a temporal approach. In addition open reduction and reconstruction of the temporal glenoid fossa via anatomic reduction of the fragments was performed. A functional occlusion was re-established via miniplate reconstruction of the complex mandibular body and ramus fractures. Prompt diagnosis and a multidisciplinary approach are essential to minimize the complications. Advanced imaging modalities of computed tomography are indicated. Treatment options should be individualized in particular in case of suspected neurological injury. Copyright © 2011 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Advances in memristors, memristive devices and systems

CERN Document Server

Volos, Christos

2017-01-01

This book reports on the latest advances in and applications of memristors, memristive devices and systems. It gathers 20 contributed chapters by subject experts, including pioneers in the field such as Leon Chua (UC Berkeley, USA) and R.S. Williams (HP Labs, USA), who are specialized in the various topics addressed in this book, and covers broad areas of memristors and memristive devices such as: memristor emulators, oscillators, chaotic and hyperchaotic memristive systems, control of memristive systems, memristor-based min-max circuits, canonic memristors, memristive-based neuromorphic applications, implementation of memristor-based chaotic oscillators, inverse memristors, linear memristor devices, delayed memristive systems, flux-controlled memristive emulators, etc. Throughout the book, special emphasis is given to papers offering practical solutions and design, modeling, and implementation insights to address current research problems in memristors, memristive devices and systems. As such, it offers a va...

MANDIBULAR MORPHOMETRY APPLIED TO ANESTHETIC BLOCKAGE IN THE MANED WOLF (CHRYSOCYON BRACHYURUS).

Science.gov (United States)

de Souza Junior, Paulo; de Moraes, Flavio Machado; de Carvalho, Natan da Cruz; Canelo, Evandro Alves; Thiesen, Roberto; Santos, André Luiz Quagliatto

2016-03-01

Chrysocyon brachyurus (maned wolf) is the biggest South American canid and has a high frequency of dental injuries, both in the wild and in captivity. Thus, veterinary procedures are necessary to preserve the feeding capacity of hundreds of captive specimens worldwide. The aim of this study was to investigate the mandibular morphometry of the maned wolf with emphasis on the establishment of anatomic references for anesthetic block of the inferior alveolar and mental nerves. Therefore, 16 measurements in 22 mandibles of C. brachyurus adults were taken. For extraoral block of the inferior alveolar nerve at the level of the mandibular foramen, the needle should be advanced close to the medial face of the mandibular ramus for 11.4 mm perpendicular to the palpable concavity. In another extraoral approach, the needle may be introduced for 30.4 mm from the angular process at a 20-25° angle to the ventral margin. For blocking only the mental nerve, the needle should be inserted for 10 mm from ventral border, close to the labial surface of the mandibular body, at the level of the lower first premolar. The mandibular foramen showed similar position, size, and symmetry in the maned wolf specimens examined. Comparison of the data observed here with those available for other carnivores indicates the need to determine these anatomic references specifically for each species.

Observation of positional relation between mandibular third molars and the mandibular canal on limited cone beam computed tomography

International Nuclear Information System (INIS)

Hashizume, Atsuko; Nakagawa, Yoichi; Ishii, Hisako; Kobayashi, Kaoru

2004-01-01

We describe the preoperative use of limited cone beam computed tomography (CT) with a dental CT scanner for the assessment of mandibular third molars before extraction. Cone beam CT provides 42.7-mm-high and 30-mm-wide rectangular solid images, with a resolution of less than 0.2 mm. The positional relationship between the mandibular third molars and the mandibular canal was examined by dental CT. Sixty-eight lower third molars of 62 patients whose teeth were superimposed on the mandibular canal on periapical or panoramic radiographs were studied. Dental CT scans clearly demonstrated the positional relationship between the mandibular canal and the teeth. The mandibular canal was located buccally to the roots of 16 teeth, lingually to the roots of 27 teeth, inferiorly to the roots of 23 teeth, and between the roots of 2 teeth. The presence of bone between the mandibular canal and the teeth was not noted in 7 of 16 buccal cases, 24 of 27 lingual cases, and 10 of 23 inferior cases on dental CT scans, suggesting that the canal was in contact with the teeth. Fifty-nine of the 68 mandibular third molars were surgically removed, and postoperative transient hypoesthesia occurred in 4 patients. Dental CT scans showed no bone between the mandibular canal and the teeth in all 4 patients. Hypoesthesia was not related to the bucco-lingual location of the mandibular canal or to the extent of bone loss between the canal and the teeth. However, hypoesthesia did not occur in patients with bone between the mandibular canal and the teeth. Thus, information on the distance between the canal and teeth on dental CT scans was useful for predicting the risk of inferior alveolar nerve damage. Because of its high resolution and low radiation dose, cone beam CT was useful for examination before mandibular third molar surgery. (author)

Overview of Mandibular Condyle Fracture

Directory of Open Access Journals (Sweden)

Su-Seong Park

2012-07-01

Full Text Available The mandibular condyle is a region that plays a key role in the opening and closing ofthe mouth, and because fracture causes functional and aesthetic problems such as facialasymmetry, it is very important to perform accurate reduction. Traditionally, there has beendisagreement on how to manage fracture of the mandibular condyle. This review exploresthe misunderstanding of mandibular condyle fracture treatment and modern-day treatmentstrategies.

[Device-aided therapies in advanced Parkinson's disease].

Science.gov (United States)

Timofeeva, A A

Advanced stages of Parkinson's disease (PD) is a consequence of the severe neurodegenerative process and are characterized by the development of motor fluctuations and dyskinesia, aggravation of non-motor symptoms. Treatment with peroral and transdermal drugs can't provide an adequate control of PD symptoms and quality-of-life of the patients at this stage of disease. Currently, three device-aided therapies: deep brain stimulation (DBS), intrajejunal infusion of duodopa, subcutaneous infusion of apomorphine can be used in treatment of patients with advanced stages of PD. Timely administration of device-aided therapies and right choice of the method determine, to a large extent, the efficacy and safety of their use. Despite the high efficacy of all three methods with respect to the fluctuation of separate symptoms, each method has its own peculiarities. The authors reviewed the data on the expediency of using each method according to the severity of motor and non-motor symptoms, patient's age, PD duration, concomitant pathology and social support of the patients.

The "at-home LLLT" in temporo-mandibular disorders pain control: a pilot study.

Science.gov (United States)

Fornaini, C; Pelosi, A; Queirolo, V; Vescovi, P; Merigo, E

2015-03-31

The Temporo-Mandibular Disorders (TMD) are a set of dysfunctional patterns concerning the temporo-mandibular joints (TMJ) and the masticatory muscles; its main symptom is pain, probably caused by inflammatory changes in the synovial membrane, alterations in the bone marrow of the mandibular condyle and impingement and compression. The aim of this preliminary study was to investigate the effectiveness in the TMD pain reduction of a new laser device recently proposed by the commerce that, due to its reduced dimensions and to be a class I laser according the ANSI classification, may be used at home by the patient himself. Twenty-four patients with TMD were randomly selected: the inclusion criteria for the sample was the diagnosis of mono- or bi-lateral TMD, with acute pain restricted to the joint area, associated with the absence of any muscle tenderness during palpation. The patients were randomly assigned to two groups: Group 1 (12 patients): patients receiving real LLLT (experimental group). Group 2 (12 patients): patients receiving inactive laser (placebo group). The treatment was performed once a day for two weeks with an 808 nm diode laser by the patient himself with irradiation of the cutaneous zone corresponding to the TMJ for 15 minutes each side. Each patient was instructed to express its pain in a visual analogue scale (VAS) making a perpendicular line between the two extremes representing the felt pain level. Statistical analysis was realized with GraphPad Instat Software, where Ptemporo-mandibular diseases by an at home self administered laser device. RESULTS are encouraging but they will have to be confirmed by greater studies.

Using advanced mobile devices in nursing practice--the views of nurses and nursing students.

Science.gov (United States)

Johansson, Pauline; Petersson, Göran; Saveman, Britt-Inger; Nilsson, Gunilla

2014-09-01

Advanced mobile devices allow registered nurses and nursing students to keep up-to-date with expanding health-related knowledge but are rarely used in nursing in Sweden. This study aims at describing registered nurses' and nursing students' views regarding the use of advanced mobile devices in nursing practice. A cross-sectional study was completed in 2012; a total of 398 participants replied to a questionnaire, and descriptive statistics were applied. Results showed that the majority of the participants regarded an advanced mobile device to be useful, giving access to necessary information and also being useful in making notes, planning their work and saving time. Furthermore, the advanced mobile device was regarded to improve patient safety and the quality of care and to increase confidence. In order to continuously improve the safety and quality of health care, advanced mobile devices adjusted for nursing practice should be further developed, implemented and evaluated in research. © The Author(s) 2013.

Overview of Mandibular Condyle Fracture

OpenAIRE

Park, Su-Seong; Lee, Keun-Cheol; Kim, Seok-Kwun

2012-01-01

The mandibular condyle is a region that plays a key role in the opening and closing of the mouth, and because fracture causes functional and aesthetic problems such as facial asymmetry, it is very important to perform accurate reduction. Traditionally, there has been disagreement on how to manage fracture of the mandibular condyle. This review explores the misunderstanding of mandibular condyle fracture treatment and modern-day treatment strategies.

Overview of Mandibular Condyle Fracture

Directory of Open Access Journals (Sweden)

Su-Seong Park

2012-07-01

Full Text Available The mandibular condyle is a region that plays a key role in the opening and closing of the mouth, and because fracture causes functional and aesthetic problems such as facial asymmetry, it is very important to perform accurate reduction. Traditionally, there has been disagreement on how to manage fracture of the mandibular condyle. This review explores the misunderstanding of mandibular condyle fracture treatment and modern-day treatment strategies.

Relationship between fracture of mandibular condyle and absence of unerupted mandibular third molar-a retrospective study.

Science.gov (United States)

Rajan, Ritesh; Verma, Dinesh Kumar; Borle, R M; Yadav, Abhilasha

2016-06-01

The purpose of the present study was to find, if there exists, a co-relation between presence of unerupted mandibular third molar and fracture of mandibular condyle. A retrospective, multicenter study was done collecting the data of all mandibular condyle fractures treated from November 2006 till August 2015. Data was collected from the patient's records and radiographs for the following information: age, sex, etiology of fracture, presence and state of lower third molars, and associated fracture. The results were subjected to statistical analysis. Out of 180 patients of condylar fracture, unerupted third molars were present in 35 (19.44 %) cases compared to 145 (80.55 %) cases of condylar fracture where the unerupted third molars were not present. The difference was statistically significant (p fracture was seen in 4 (11.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 9 (25.7 %) cases, isolated unilateral condylar fracture in 0 (0.0 %) cases, and unilateral condylar fracture associated with other mandibular fractures in 17 (48.5 %) cases and condylar fracture associated with mid face fractures in 5 (14.2 %) cases. In the unerupted third molar absent group, isolated bilateral condylar fracture was seen in 5 (3.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 30 (20.6 %) cases, isolated unilateral condylar fracture in 24 (16.5 %) cases, unilateral condylar fracture associated with other mandibular fractures in 73 (50.34 %) cases, and condylar fracture associated with mid face fractures in 13(8.96 %) cases. The difference between the groups was statistically significant (p = 0.032). This study suggests that the fractures of mandibular condylar region have a significantly higher incidence in patients without an unerupted mandibular third molar.

The effect of a mandibular advancement appliance on cervical lordosis in patients with TMD and cervical pain.

Science.gov (United States)

Santander, Hugo; Zúñiga, Claudia; Miralles, Rodolfo; Valenzuela, Saúl; Santander, Montserrat Carolina; Gutiérrez, Mario Felipe; Córdova, Rosa

2014-10-01

A preliminary study to compare cervical lordosis by means of cervical cephalometric analysis, before and after six months of continuous mandibular advancement appliance (MAA) use, and to show how physical therapy posture re-education would improve the cervical lordosis angle. Twenty-two female patients with temporomandibular disorders (TMD) and cervical pain with lordosis 0·05; Shapiro Wilk Test), so the paired comparison of the cephalometric measurements was made by t-test for dependent samples. Angle 1 (OPT/7CVT); angle 3 (CVT/EVT) and angle 4 (2CL/7CL) showed a significant increase in the cervical lordosis. Angle 2 (MGP/OP), angle 5 (HOR/CVT) and the distances C0-C2 and Pt-VER, presented no significant changes. The increase in cervical lordosis implies that six months of continuous MAA use, together with a program of postural re-education, promotes the homeostasis of the craniocervical system.

The “at-home LLLT” in temporo-mandibular disorders pain control: a pilot study

Science.gov (United States)

Pelosi, A; Queirolo, V; Vescovi, P; Merigo, E

2015-01-01

Objectives: The Temporo-Mandibular Disorders (TMD) are a set of dysfunctional patterns concerning the temporo-mandibular joints (TMJ) and the masticatory muscles; its main symptom is pain, probably caused by inflammatory changes in the synovial membrane, alterations in the bone marrow of the mandibular condyle and impingement and compression. The aim of this preliminary study was to investigate the effectiveness in the TMD pain reduction of a new laser device recently proposed by the commerce that, due to its reduced dimensions and to be a class I laser according the ANSI classification, may be used at home by the patient himself. Material and methods: Twenty-four patients with TMD were randomly selected: the inclusion criteria for the sample was the diagnosis of mono- or bi-lateral TMD, with acute pain restricted to the joint area, associated with the absence of any muscle tenderness during palpation. The patients were randomly assigned to two groups: Group 1 (12 patients): patients receiving real LLLT (experimental group). Group 2 (12 patients): patients receiving inactive laser (placebo group). The treatment was performed once a day for two weeks with an 808 nm diode laser by the patient himself with irradiation of the cutaneous zone corresponding to the TMJ for 15 minutes each side. Each patient was instructed to express its pain in a visual analogue scale (VAS) making a perpendicular line between the two extremes representing the felt pain level. Statistical analysis was realized with GraphPad Instat Software, where Ptemporo-mandibular diseases by an at home self administered laser device. Results are encouraging but they will have to be confirmed by greater studies. PMID:25941425

Advanced Materials and Devices for Bioresorbable Electronics.

Science.gov (United States)

Kang, Seung-Kyun; Koo, Jahyun; Lee, Yoon Kyeung; Rogers, John A

2018-05-15

Recent advances in materials chemistry establish the foundations for unusual classes of electronic systems, characterized by their ability to fully or partially dissolve, disintegrate, or otherwise physically or chemically decompose in a controlled fashion after some defined period of stable operation. Such types of "transient" technologies may enable consumer gadgets that minimize waste streams associated with disposal, implantable sensors that disappear harmlessly in the body, and hardware-secure platforms that prevent unwanted recovery of sensitive data. This second area of opportunity, sometimes referred to as bioresorbable electronics, is of particular interest due to its ability to provide diagnostic or therapeutic function in a manner that can enhance or monitor transient biological processes, such as wound healing, while bypassing risks associated with extended device load on the body or with secondary surgical procedures for removal. Early chemistry research established sets of bioresorbable materials for substrates, encapsulation layers, and dielectrics, along with several options in organic and bio-organic semiconductors. The subsequent realization that nanoscale forms of device-grade monocrystalline silicon, such as silicon nanomembranes (m-Si NMs, or Si NMs) undergo hydrolysis in biofluids to yield biocompatible byproducts over biologically relevant time scales advanced the field by providing immediate routes to high performance operation and versatile, sophisticated levels of function. When combined with bioresorbable conductors, dielectrics, substrates, and encapsulation layers, Si NMs provide the basis for a broad, general class of bioresorbable electronics. Other properties of Si, such as its piezoresistivity and photovoltaic properties, allow other types of bioresorbable devices such as solar cells, strain gauges, pH sensors, and photodetectors. The most advanced bioresorbable devices now exist as complete systems with successful demonstrations of

The role of simultaneous gap arthroplasty and distraction osteogenesis in the management of temporo-mandibular joint ankylosis with mandibular deformity in children.

Science.gov (United States)

Rao, Krishna; Kumar, Sudhir; Kumar, Vijay; Singh, Arun Kumar; Bhatnagar, Sudhir Kumar

2004-02-01

Temporo-mandibular joint ankylosis is a common cause of acquired deformity in children. Surgical correction of the ankylosis only leaves the patient with an uncorrected mandibular deformity. This study was to evaluate the use of distraction osteogenesis for simultaneous correction of the mandibular deformity. This study was done on six children with temporo-mandibular joint ankylosis and mandibular deformity. Uniaxial double pin distractors with Schanz pins were used in this study. The patients underwent simultaneous gap arthroplasty and mandibular osteotomy (retromolar) with distractor insertion. Distraction was started on the fifth post-operative day. The patients were put on dynamic temporo-mandibular joint exercises on the first post-operative day. All patients had a satisfactory mouth opening on follow-up. Satisfactory cosmetic correction of the mandibular deformity was also achieved in all these patients. Some degree of malocclusion resulted from treatment due to which the patients were placed on orthodontic treatment. Distraction osteogenesis can be used simultaneously with gap arthroplasty in patients with temporo-mandibular ankylosis, for the correction of the mandibular deformity.

Cone Beam Computed Tomography Assisted Endodontic Management of a Rare Case of Mandibular First Premolar with Three Roots

OpenAIRE

Balakasireddy, K; Kumar, K Pavan; John, Gijo; Gagan, C

2015-01-01

Understanding the morphological anatomy of the root and root canal systems of the teeth increases the success rate of endodontic therapy. Advanced diagnostic imaging techniques like cone beam computed tomography (CBCT) are an essential aid in understanding the anatomy of teeth especially in mandibular premolars. Most commonly mandibular first and second premolars have a single root and a single canal. However, multiple root and canals have also been reported. The present case report discusses...

Thin-plate spline analysis of mandibular growth.

Science.gov (United States)

Franchi, L; Baccetti, T; McNamara, J A

2001-04-01

The analysis of mandibular growth changes around the pubertal spurt in humans has several important implications for the diagnosis and orthopedic correction of skeletal disharmonies. The purpose of this study was to evaluate mandibular shape and size growth changes around the pubertal spurt in a longitudinal sample of subjects with normal occlusion by means of an appropriate morphometric technique (thin-plate spline analysis). Ten mandibular landmarks were identified on lateral cephalograms of 29 subjects at 6 different developmental phases. The 6 phases corresponded to 6 different maturational stages in cervical vertebrae during accelerative and decelerative phases of the pubertal growth curve of the mandible. Differences in shape between average mandibular configurations at the 6 developmental stages were visualized by means of thin-plate spline analysis and subjected to permutation test. Centroid size was used as the measure of the geometric size of each mandibular specimen. Differences in size at the 6 developmental phases were tested statistically. The results of graphical analysis indicated a statistically significant change in mandibular shape only for the growth interval from stage 3 to stage 4 in cervical vertebral maturation. Significant increases in centroid size were found at all developmental phases, with evidence of a prepubertal minimum and of a pubertal maximum. The existence of a pubertal peak in human mandibular growth, therefore, is confirmed by thin-plate spline analysis. Significant morphological changes in the mandible during the growth interval from stage 3 to stage 4 in cervical vertebral maturation may be described as an upward-forward direction of condylar growth determining an overall "shrinkage" of the mandibular configuration along the measurement of total mandibular length. This biological mechanism is particularly efficient in compensating for major increments in mandibular size at the adolescent spurt.

Reconstruction of mandibular defects using nonvascularized autogenous bone graft in Nigerians

Directory of Open Access Journals (Sweden)

Kizito Chioma Ndukwe

2014-01-01

Full Text Available Objectives: The aim of this study is to evaluate the success rate and complications of mandibular reconstruction with nonvascularized bone graft in Ile-Ife, Nigeria. Patients and Methods: A total of 25 patients who underwent reconstruction of mandibular discontinuity defects between January 2003 and February 2012, at the Obafemi Awolowo University Teaching Hospitals Complex, Ile-Ife constituted the study sample. Relevant information was retrieved from the patients′ records. This information include patients′ demographics (age and sex as well as the type of mandibular defect, cause of the defect, type of mandibular resection done, source of the bone graft used, and the method of graft immobilization. Morbidity associated with the graft procedures were assessed by retrieving information on graft failures, length of hospital stay following surgery, rehabilitation device used and associated graft donor and recipient site complications. Result: There were 12 males and 13 females with a male:female ratio was 1:1.1. The age of the patients ranged from 13 to 73 years with a mean age for males 32.7 ± standard deviation (SD 12.9 and for females 35.0 ± SD 17.1. Jaw defect was caused by resection for tumours and other jaw pathologies in 92% of cases. Complete symphyseal involvement defect was the most common defect recorded 11 (44%. Reconstruction with nonvascularized rib graft accounted for 68% of cases while iliac crest graft was used in 32% of the patients. Successful take of the grafts was recorded in 22 patients while three cases failed. Wound dehiscence (two patients and postoperative wound infection (eight patients were the most common complications recorded. Conclusion: The use of nonvascularized graft is still relevant in the reconstruction of large mandibular defects caused by surgical ablation of benign conditions in Nigerians. Precise surgical planning and execution, extended antibiotic therapy, and meticulous postoperative care

MORPHOMETRIC ANALYSIS OF MANDIBULAR FORAMEN AND INCIDENCE OF ACCESSORY MANDIBULAR FORAMINA IN ADULT HUMAN MANDIBLES OF AN INDIAN POPULATION. Análisis morfométrico del foramen mandibular e incidencia de la foramina mandibular accesoria en mandíbulas adult

Directory of Open Access Journals (Sweden)

Prajna Paramita Samanta

2016-03-01

Full Text Available El foramen mandibular es un importante hito anatómico. Para procedimientos como el bloqueo alveolar inferior del nervio, el tratamiento con implantes y osteotomías mandibulares, un profundo conocimiento de la ubicación del foramen mandibular (MF y el foramen mandibular accesorio (AMF es un requisito previo. Hay pocas referencias en la literatura con respecto a la localización anatómica exacta del foramen mandibular. Por lo tanto, el presente estudio tuvo como objetivo identificar la ubicación exacta de la MF y la incidencia de la AMF alrededor MF en una población india. Sesenta (60 mandíbulas humanas adultas fueron estudiadas para determinar la distancia del LV de la los anteriores, bordes posteriores de la rama mandibular, maxilar inferior categoría y el ángulo de la mandíbula. AMF todo el MF también fueron estudiados por su presencia y números. La distancia media de MF del borde anterior de rama mandibular fue 15,72 ±2,92 mm(lado derecho, 16,23 ±2,88 mm(lado izquierdo, de borde posterior fue 13,29 ±1,74 mm(lado derecho y 12,73 ±2,04 mm(a la izquierda lado. La MF se encuentra 22,70 ±3 mm(lado derecho y 22, 27 ± 2,62 mm(lado izquierdo de la muesca mandibular. La distancia de MF de ángulo de la mandíbula fue 21,54 ±2,92 mm(lado derecho y 21,13 ±3.43 mm(lado izquierdo. AMF estuvieron presentes en el 16, 66% de las mandíbulas. En 10% de las mandíbulas una sola AMF estaba presente y en el 6,66% hubo dos agujeros presentes. La ubicación del MF y AMF es importante para evitar compli-caciones como hemorragia y parestesia durante los procedimientos quirúrgicos orales y también para los radioterapeutas en la planificación de la radioterapia.  The mandibular foramen is an important anatomical land mark. For procedures like inferior alveolar nerve block, implant treatment and mandibular osteotomies, a thorough knowledge of the location of the mandibular foramen (MF and accessory mandibular foramina (AMFs is a prerequisite

Measuring mandibular ridge reduction

International Nuclear Information System (INIS)

Steen, W.H.A.

1984-01-01

This thesis investigates the mandibular reduction in height of complete denture wearers and overdenture wearers. To follow this reduction in the anterior region as well as in the lateral sections of the mandible, an accurate and reproducible measuring method is a prerequisite. A radiologic technique offers the best chance. A survey is given of the literature concerning the resorption process after the extraction of teeth. An oblique cephalometric radiographic technique is introduced as a promising method to measure mandibular ridge reduction. The reproducibility and the accuracy of the technique are determined. The reproducibility in the positioning of the mandible is improved by the introduction of a mandibular support which permits a precise repositioning of the edentulous jaw, even after long periods of investigation. (Auth.)

Mandibular canal branches supplying the mandibular third molar observed on cone beam computed tomographic images: Reports of four cases

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Seo; Yoon, Suk Ja; Kang, Byung Cheol [Department of Oral and Maxillofacial Radiology, School of Dentistry, Dental Science Research Institute, Chonnam National University, Gwangju (Korea, Republic of)

2009-12-15

Bifid mandibular canal can be an anatomic variation. This condition can lead to complication when performing mandibular anesthesia or during extraction of lower third molar, placement of implants and surgery in the mandible. Four patients underwent preoperative imaging for extraction of third molars using CBCT (CB Mercuray, Hitachi, Japan). The axial images were processed with CBworks program 2.1 (CyberMed Inc., Seoul, Korea). The branches for supplying the lower third molar were identified mainly on cross-sectional and panoramic images of CBCT. Since the location and configuration of mandibular canal variations are important in any mandibular surgical procedures, we report 4 cases of bifid mandibular canal with panoramic and the CBCT images.

Determination of mandibular border and functional movement protocols using an electromagnetic articulograph (EMA).

Science.gov (United States)

Fuentes, Ramon; Navarro, Pablo; Curiqueo, Aldo; Ottone, Nicolas E

2015-01-01

The electromagnetic articulograph (EMA) is a device that can collect movement data by positioning sensors at multiple points, measuring displacements of the structure in real time, as well as the acoustics and mechanics of speech using a microphone connected to the measurement system. The aim of this study is to describe protocols for the generation, measurement and visualization of mandibular border and functional movements in the three spatial planes (frontal, sagittal and horizontal) using the EMA. The EMA has transmitter coils that determine magnetic fields to collect information about movements from sensors located on different structures (tongue, palate, mouth, incisors, skin, etc.) and in every direction in an area of 300 mm. After measurement with the EMA, the information is transferred to a computer and read with the Visartico software to visualize the recording of the mandibular movements registered by the EMA. The sensors placed in the space between the three axes XYZ are observed, and then the plots created from the mandibular movements included in the corresponding protocol can be visualized, enabling interpretation of these data. Four protocols for the obtaining of images of the opening and closing mandibular movements were defined and developed, as well as border movements in the frontal, sagittal and horizontal planes, managing to accurately reproduce Posselt's diagram and Gothic arch on the latter two axes. Measurements with the EMA will allow more exact data to be collected in relation to the mandibular clinical physiology and morphology, which will permit more accurate diagnoses and application of more precise and adjusted treatments in the future.

Determination of mandibular border and functional movement protocols using an electromagnetic articulograph (EMA)

Science.gov (United States)

Fuentes, Ramon; Navarro, Pablo; Curiqueo, Aldo; Ottone, Nicolas E

2015-01-01

The electromagnetic articulograph (EMA) is a device that can collect movement data by positioning sensors at multiple points, measuring displacements of the structure in real time, as well as the acoustics and mechanics of speech using a microphone connected to the measurement system. The aim of this study is to describe protocols for the generation, measurement and visualization of mandibular border and functional movements in the three spatial planes (frontal, sagittal and horizontal) using the EMA. The EMA has transmitter coils that determine magnetic fields to collect information about movements from sensors located on different structures (tongue, palate, mouth, incisors, skin, etc.) and in every direction in an area of 300 mm. After measurement with the EMA, the information is transferred to a computer and read with the Visartico software to visualize the recording of the mandibular movements registered by the EMA. The sensors placed in the space between the three axes XYZ are observed, and then the plots created from the mandibular movements included in the corresponding protocol can be visualized, enabling interpretation of these data. Four protocols for the obtaining of images of the opening and closing mandibular movements were defined and developed, as well as border movements in the frontal, sagittal and horizontal planes, managing to accurately reproduce Posselt’s diagram and Gothic arch on the latter two axes. Measurements with the EMA will allow more exact data to be collected in relation to the mandibular clinical physiology and morphology, which will permit more accurate diagnoses and application of more precise and adjusted treatments in the future. PMID:26884903

[Orthodontic treatment of Class III patients with mandibular asymmetry].

Science.gov (United States)

Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

2008-12-01

To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

Fusion of a supernumerary tooth to right mandibular second molar: a case report and literature review.

Science.gov (United States)

Zhu, Min; Liu, Chao; Ren, Shuangshuang; Lin, Zintong; Miao, Leiying; Sun, Weibin

2015-01-01

Gemination or fusion is a rare occurrence in the mandibular posterior teeth. The aim of this article is to describe the problems encountered and the strategy employed in treating such cases. A 34 years old patient came with the complaint of spontaneous and radiating pain in the right mandibular posterior region. The tooth in concern was an anomalous 'double' second mandibular molar diagnosed as having necrotic pulp with chronic apical abscess of endodontic origin. The present case emphasizes the importance of identifying anatomical anomalies during treatment of fused teeth with supernumerary tooth, and the need for the use of advanced imaging modalities like CBCT which is a critical aid in the diagnosis of such cases. Fused teeth can be managed quite efficiently by an overall combined treatment including both endodontic and periodontal therapy.

Application of biodegradable plates for treating pediatric mandibular fractures.

Science.gov (United States)

An, Jingang; Jia, Pengcheng; Zhang, Yi; Gong, Xi; Han, Xiaodong; He, Yang

2015-05-01

We assessed the clinical results of a biodegradable plate system for the internal fixation of mandibular fractures in children, and observed the imaging features of fracture healing and bone changes around the biodegradable plates and screws during follow-up. We enrolled 39 patients (22 male, 17 female, average age 4 years 10 months) with different mandibular fractures. We used 2.0-mm resorbable plates to repair the fractures. Postoperative follow-up ranged from 6 months to 5 years; average follow-up was 1 year 2 months. The outcome measures identified and assessed included facial symmetry, mouth opening, occlusal relationship, infection, nonunion, malunion, and plate dehiscence. We fixed 42 fractures with 43 resorbable plates; the fracture site of one patient (aged 11 years 3 months) was fixed with two plates. Two patients developed small fistulas at the intraoral incision 2 months after surgery; the fistulas healed after 1 month without special treatment. In the other patients, the incision healed well, there was facial symmetry, mouth opening was >35 mm, and occlusion was good. Follow-up computed tomography examination data were available for 20 cases, and revealed different degrees of radiolucency indicating that osteolysis had occurred. Radiolucency was observed around the resorbable plates 1 month after the surgery. The extent and depth of the radiolucent region were obvious within 1 year of surgery. In the second year, there were obvious repairs, with the bony defect areas becoming shallower. After 2 years, the bony defect areas had almost disappeared. Biodegradable fixation devices are safe and efficient for treating pediatric mandibular fractures. Osteolysis commonly follows biodegradable fixation of pediatric mandibular fractures, and has no adverse effect on fracture healing. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Mandibular ameloblastomas

International Nuclear Information System (INIS)

Masip, M.J.; Arana, E.; Beltran, J.; Garcia, J.L.; Cifrian, C.; Aparisi, F.

1995-01-01

We present a retrospective review of 39 cases of mandibular ameloblastoma that were assessed in terms of patient age and sex, duration and clinical signs at the time of diagnosis. The associated plain radiology, CT and MR signs are also reviewed. It usually presented as a slowly growing, painless mass. According to radiological findings, most of the ameloblastomas studied were extensive, involving the mandibular branch, angle and molar area; the lesions were expanding, unilocular or multilocular, with erosion of the dental apex. CT disclosed cystic areas of low attenuation. The images of the three patients studied by MR presented low signal intensity in T1-weighed sequences and hyperintense signal in t2-weighted sequences. 9 refs

Use of SIG device to accurately place permanent miniature dental implants to retain mandibular overdenture. A case report.

Science.gov (United States)

Sussman, Harold I; Goodridge, Opal F

2006-01-01

A case of mini-dental implant insertion for retention of a mandibular overdenture in a hospitalized patient has been documented. The additional use of the SIG (drill guide) directional device in the implant placement protocol gave the practitioner more confidence and resulted in the proper alignment of the three ball-top, one-piece fixtures. The three implants were inserted exactly 1 cm apart and parallel to each other. The distal fixtures were approximately 1 cm away from the mental foramina, thereby eliminating the risk of lip paresthesia. Keeper caps were placed in the denture's intaglio after one month. The keeper caps allowed for proper retention of the overdenture. The caps also enabled the patient to easily insert and withdraw his denture, even though he displayed limited manual dexterity. The tissue response was excellent, and oral hygiene was made easier with adequate spacing of the exposed ball-tops. The overall experience for both the operator and the patient was very positive. General dentists should be able to readily master this technique and add it to their armamentarium for the benefit of all their patients.

Advanced upper limb prosthetic devices: implications for upper limb prosthetic rehabilitation.

Science.gov (United States)

Resnik, Linda; Meucci, Marissa R; Lieberman-Klinger, Shana; Fantini, Christopher; Kelty, Debra L; Disla, Roxanne; Sasson, Nicole

2012-04-01

The number of catastrophic injuries caused by improvised explosive devices in the Afghanistan and Iraq Wars has increased public, legislative, and research attention to upper limb amputation. The Department of Veterans Affairs (VA) has partnered with the Defense Advanced Research Projects Agency and DEKA Integrated Solutions to optimize the function of an advanced prosthetic arm system that will enable greater independence and function. In this special communication, we examine current practices in prosthetic rehabilitation including trends in adoption and use of prosthetic devices, financial considerations, and the role of rehabilitation team members in light of our experiences with a prototype advanced upper limb prosthesis during a VA study to optimize the device. We discuss key challenges in the adoption of advanced prosthetic technology and make recommendations for service provision and use of advanced upper limb prosthetics. Rates of prosthetic rejection are high among upper limb amputees. However, these rates may be reduced with sufficient training by a highly specialized, multidisciplinary team of clinicians, and a focus on patient education and empowerment throughout the rehabilitation process. There are significant challenges emerging that are unique to implementing the use of advanced upper limb prosthetic technology, and a lack of evidence to establish clinical guidelines regarding prosthetic prescription and treatment. Finally, we make recommendations for future research to aid in the identification of best practices and development of policy decisions regarding insurance coverage of prosthetic rehabilitation. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Nutrient canals on mandibular anterior region in cone beam computed tomography

International Nuclear Information System (INIS)

Kang, Jung Ho; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan

2006-01-01

To evaluate location, distribution, diameter, and length of the nutrient canals on mandibular anterior region using a cone beam computed tomography (CBCT). Mandibular CBCT was performed on 33 adults (18 males and 15 female) with no history of systemic disease, and any other dental surgery history. Location, distribution, diameter, and length of the nutrient canals on mandibular anterior region were radiographically evaluated. A statistical comparison was done by SPSS. In the location and distribution of nutrient canals, they were found in 6.8% at labial portion above root apex, in 93.28% at lingual portion above root apex in 46.2% at labial portion below root apex, and in 53.6% at lingual portion below root apex. Nutrient canals at lingual portion above root apex were most frequently observed between central and lateral incisors, and those at labial and lingual portion below root apex were most frequently observed between central incisors. The mean diameters of nutrient canals were 0.54 mm at labial portion above root apex, 0.61 mm at lingual portion above root apex, 0.66 mm at labial portion below root apex, and 0.76 mm at lingual portion below root apex. The mean lengths of nutrient canals were 2.63 mm at labial portion above root apex, 3.74 mm at lingual portion above root apex, 4.51 mm at labial portion below root apex, and 6.77 mm at lingual portion below root apex. CBCT is useful device to evaluate the anatomical structure of nutrient canals on mandibular anterior region

Nutrient canals on mandibular anterior region in cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Kang, Jung Ho; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan [Kyung Hee Univ. College of Dentistry, Seoul (Korea, Republic of)

2006-09-15

To evaluate location, distribution, diameter, and length of the nutrient canals on mandibular anterior region using a cone beam computed tomography (CBCT). Mandibular CBCT was performed on 33 adults (18 males and 15 female) with no history of systemic disease, and any other dental surgery history. Location, distribution, diameter, and length of the nutrient canals on mandibular anterior region were radiographically evaluated. A statistical comparison was done by SPSS. In the location and distribution of nutrient canals, they were found in 6.8% at labial portion above root apex, in 93.28% at lingual portion above root apex in 46.2% at labial portion below root apex, and in 53.6% at lingual portion below root apex. Nutrient canals at lingual portion above root apex were most frequently observed between central and lateral incisors, and those at labial and lingual portion below root apex were most frequently observed between central incisors. The mean diameters of nutrient canals were 0.54 mm at labial portion above root apex, 0.61 mm at lingual portion above root apex, 0.66 mm at labial portion below root apex, and 0.76 mm at lingual portion below root apex. The mean lengths of nutrient canals were 2.63 mm at labial portion above root apex, 3.74 mm at lingual portion above root apex, 4.51 mm at labial portion below root apex, and 6.77 mm at lingual portion below root apex. CBCT is useful device to evaluate the anatomical structure of nutrient canals on mandibular anterior region.

76 FR 71982 - Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices...

Science.gov (United States)

2011-11-21

... Multiplexed Microbiology Devices: Their clinical application and public health/clinical needs; inclusion of...] Advancing Regulatory Science for Highly Multiplexed Microbiology/ Medical Countermeasure Devices; Public... Multiplexed Microbiology/ Medical Countermeasure Devices'' that published in the Federal Register of August 8...

Assessment of obstructive sleep apnoea treatment success or failure after maxillomandibular advancement.

Science.gov (United States)

de Ruiter, M H T; Apperloo, R C; Milstein, D M J; de Lange, J

2017-11-01

Maxillomandibular advancement (MMA) is an alternative therapeutic option that is highly effective for treating obstructive sleep apnoea (OSA). MMA provides a solution for OSA patients that have difficulty accepting lifelong treatments with continuous positive airway pressure or mandibular advancement devices. The goal of this study was to investigate the different characteristics that determine OSA treatment success/failure after MMA. The apnoea-hypopnoea index (AHI) was used to determine the success or failure of OSA treatment after MMA. Sixty-two patients underwent MMA for moderate and severe OSA. A 71% success rate was observed with a mean AHI reduction of 69%. A statistically significant larger neck circumference was measured in patients with failed OSA treatments following MMA (P=0.008), and older patients had failed OSA treatments with MMA: 58 vs. 53 years respectively (P=0.037). Cephalometric analysis revealed no differences between successful and failed OSA treatment outcomes. There was no difference in maxillary and mandibular advancements between success and failed MMA-treated OSA patients. The complications most frequently reported following MMA were sensory disturbances in the inferior alveolar nerve (60%) and malocclusion (24%). The results suggest that age and neck girth may be important factors that could predict susceptibility to OSA treatment failures by MMA. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Anquilosis mandibular: una frecuente secuela por Noma Mandibular ankylosis: a Noma frequent sequel

Directory of Open Access Journals (Sweden)

R. Fernández García-Guilarte

2009-12-01

Full Text Available Conocemos poco sobre el Noma o Enfermedad Cancrum Oris. Esta entidad afecta a niños con malnutrición crónica, poca higiene oral, poco desarrollo sanitario y enfermedades concurrentes debilitantes. Existe un consenso general sobre que el Noma empieza como una gingivitis; en su fase aguda, puede haber respuesta al tratamiento antibiótico, no obstante, las secuelas tras su curación incluyen daños estéticos y funcionales variables, que pueden requerir cirugía reconstructiva. Presentamos 3 casos de anquilosis mandibular que en el examen preoperatorio presentaron dimorfismo mandibular, fusión de hueso maxilar y mandibular y anquilosis de la articulación témporomandibular. La ortopantografía y la Tomografía Axial Computerizada (TAC fueron muy útiles en la planificación de la cirugía. El tratamiento quirúrgico consistió en todos los casos en la resección del hueso anquilótico y la reconstrucción con injerto condrocostal en uno de los casos. En el postoperatorio se siguió fisioterapia intensiva. Clínicamente todos los pacientes mostraron una gran mejoría en la masticación, la alimentación y el habla, obviamente debido a una buena oclusión. El problema más común fue la baja colaboración en la rehabilitación mandibular por parte de los pacientes.Little is known about Noma or Cancrum Oris Disease. This entity affects to children with chronic malnutrition, poor oral hygiene, poor environmental sanitation and debilitating concurrent illness. There is general consensus that noma starts as gingivitis. The acute stage responds readily to antibiotic treatment. The sequelae after healing include variable functional and aesthetic impairments, which require reconstructive surgery. We report 3 cases of mandibular ankylosis. Preoperative examination revealed mandibular dismorphism, fusion of maxilla and mandible and ankylosis of the temporomandibular joint. Orthopantography and Computed Thomography scan (TCS were very useful in planning

Possibility of estimating three-dimensional mandibular morphology by cephalogram analysis

International Nuclear Information System (INIS)

Kim, S.; Motegi, Etsuko; Kikuchi, Yu; Yamaguchi, Hideharu; Takaki, Takashi; Shibahara, Takahiko

2007-01-01

The purpose of this study was to investigate the possibility of a surmise of three-dimensional mandibular morphology by two-dimensional cephalogram analysis. The materials were three-dimensional CT and cephalogram of 20 female mandibular prognathism patients (average age: 25.20±7.49) before there orthognathic surgery. Mandibular bone volume and sponge bone width were calculated from three-dimensional images constructed from CT images using imaging software (Real Intage, KGT inc.). There was a positive correlation (r=0.72) between mandibular volume value and mandibular ramus width. There was a positive correlation between sponge bone width at the site of the mandibular cuspid and mandibular ramus width and SNB angle (r=0.80), and between sponge bone width at the site of the mandibular molar and symphysis height and mandibular ramus width (r=0.81). It was thought that these results will be useful for a surmise of three-dimensional mandibular morphology by cephalogram analysis. (author)

21 CFR 872.2060 - Jaw tracking device.

Science.gov (United States)

2010-04-01

... the diagnosis of temporomandibular joint disorders and associated orofacial pain is a nonpowered or... § 872.9. (b) Jaw tracking device for interpretation of mandibular jaw positions for the diagnosis—(1...

Pharyngeal airway changes following mandibular setback surgery

Directory of Open Access Journals (Sweden)

Babu Ramesh

2005-01-01

Full Text Available Treatment of dentofacial deformities with jaw osteotomies has an effect on airway anatomy and therefore mandibular setback surgery has the potential to diminish airway size. The purpose of this study was to evaluate the effect of mandibular setback surgery on airway size. 8 consecutive patients were examined prospectively. All patients underwent mandibular setback surgery. Cephalometric analysis was performed preoperatively and 3 months post operatively with particular attention to pharyngeal airway changes. Pharyngeal airway size decreased considerably in all, patients thus predisposing to development of obstructive sleep apnea. Therefore, large anteroposterior discrepancies should be corrected by combined maxillary and mandibular osteotomies.

Biomechanical considerations in mandibular incisor extraction cases.

Science.gov (United States)

Rachala, Madhukar Reddy; Aileni, Kaladhar Reddy; Dasari, Arun Kumar; Sinojiya, Jay

2015-01-01

Mandibular incisor extraction can be regarded as a valuable treatment option in certain malocclusions to obtain excellence in orthodontic results in terms of function, aesthetics and stability. This treatment alternative is indicated in clinical situations like mild to moderate class III malocclusion, mild anterior mandibular tooth size excess, periodontally compromised teeth, ectopic eruption of mandibular incisor and minimal openbite tendencies. Unlike in premolar extraction cases, space closure in mandibular incisor extraction cases is unique in which the extraction space will be in the middle of the arch. The end result of space closure in these cases should be well aligned, upright, anterior teeth with parallel roots and the goal can be achieved with the bodily tooth movement through proper application of biomechanics. The purpose of this article is to explain the biomechanics of space closure in mandibular incisor extraction cases.

Forecasting the timing of peak mandibular growth in males by using skeletal age.

Science.gov (United States)

Hunter, W Stuart; Baumrind, Sheldon; Popovich, Frank; Jorgensen, Gertrud

2007-03-01

It is generally believed that the orthodontic treatment of a patient with a Class II malocclusion and a small mandible is enhanced by good growth at puberty, so that the timing of peak mandibular growth at puberty becomes of interest. To test the belief that skeletal age, whether early, average, or late, can be used to predict the timing of maximum growth of the mandible, whether early, average, or late, the predictive relationship between skeletal age and peak mandibular growth velocity (PMdV) at puberty was evaluated in 94 boys by using their longitudinal records from 4 to 18 years of age. Skeletal age was determined for each subject at ages 9 through 14 by using the method of Greulich and Pyle. At age 9, the Greulich and Pyle measurements predicted that 30 of the 94 subjects would have delayed PMdV equal to or exceeding 1 SD (of the mean age for PMdV), and 10 would have advanced PMdV equal to or exceeding 1 SD. When the actual age of PMdV was determined retrospectively from plots of annual mandibular growth increments, it was found that only 4 of the 30 in the delayed group had actually experienced delays in PMdV, and only 2 of the 10 in the advanced group had experienced accelerated PMdV. Skeletal age is not a reliable predictor of the timing of PMdV.

Combined use of rapid-prototyping model and surgical guide in correction of mandibular asymmetry malformation patients with normal occlusal relationship.

Science.gov (United States)

Xu, Haisong; Zhang, Ce; Shim, Yoong Hoon; Li, Hongliang; Cao, Dejun

2015-03-01

The aim of this study is to discuss the application of rapid-prototyping model and surgical guide in the treatment of mandibular asymmetry malformation with normal occlusal relationship. Twenty-four mandibular asymmetry malformation patients with relatively normal occlusal relationship were included in this study. Surgical 3-dimensional rapid-prototyping mandibular models were made for all patients from the computed tomography (CT) DICOM data. The presurgical plan was designed on the model, and the surgical guiders for the osteotomy lines were manufactured. Genioplasty and/or mandibular osteotomy based on the presurgical plan were performed on these patients with the combined use of the rapid-prototyping model and surgical guides. All patients underwent postoperative CT scan and had at least 3-month follow-up. All patients were satisfied with the final results. According to the postoperative CT images and 3-month follow-up, all patients' mandibular asymmetry malformation was significantly improved, and the operation time was distinctly shortened relative to the conventional method. Rapid-prototyping model and surgical guide are viable auxiliary devices for the treatment of mandibular asymmetry malformation with relatively normal occlusal relationship. Combined use of them can make precise preoperative design, improve effects of operation, and shorten operating time.

Mandibular Advancing Positive Pressure Apnea Remediation Device (MAPPARD)

Science.gov (United States)

2014-06-01

also medical prosthesis design as well. ArtiSynth is currently working on a study, described in Chapter V, to predict whether a patient with OSA is...deformable mesh, and is measured by the fluid-solid interface. This is due to the fact that the mesh faces feel the pressure predicted from the fluid

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

Science.gov (United States)

Ikeda, Yuhei; Kokai, Satoshi; Ono, Takashi

2018-01-01

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Mandibular reconstruction in adults: a review.

NARCIS (Netherlands)

Goh, B.T.; Lee, S.; Tideman, H.; Stoelinga, P.J.W.

2008-01-01

Mandibular defects may result from trauma, inflammatory disease and benign or malignant tumours. Mastication, speech and facial aesthetics are often severely compromised without reconstruction. The goal of mandibular reconstruction is to restore facial form and function, implying repair of

Patient's experience of treatment for sleep apnoea with a mandibular advancement splint.

Science.gov (United States)

Bhamrah, Gurprit; Dhir, Arti; Cash, Alex; Ahmad, Sofia; Winchester, Lindsay J

2015-10-01

Obstructive sleep apnoea (OSA) is a well recognised clinical disorder in which there is narrowing and repeated collapse of the upper airway during sleep resulting in the cessation of breathing. Patients with mild to moderate sleep apnoea are often provided with mandibular advancement splint (MAS) therapy as a form of first line or definitive treatment. The aims of this audit were to evaluate patient satisfaction and success of MAS therapy. 93 patients diagnosed with sleep apnoea and suitable for a splint were recruited prospectively at Queen Victoria Hospital, East Grinstead between January 2009 and October 2010. A patient satisfaction questionnaire was developed by health professionals involved in the care of patients with sleep apnoea and assessed for face and content validity and reliability. Participants completed the questionnaire six weeks after the splint was fitted. 44% who previously experienced snoring now reported no snoring and 47% reported less snoring since wearing the MAS appliance. 69% reported complete resolution of sleep apnoea symptoms. 37% experienced aching teeth and 33% experienced having a dry throat when wearing the appliance. 86% of sleeping partners felt that their quality of sleep was improved following their partners treatment. The standards set for each criteria in this audit were met. MAS treatment has a key role to play in the management of obstructive sleep apnoea with high rates of patient satisfaction and the majority of patients partners reporting a significant improvement in their own and their partners sleep quality. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Smart electrochemical biosensors: From advanced materials to ultrasensitive devices

Energy Technology Data Exchange (ETDEWEB)

Sadik, Omowunmi A., E-mail: osadik@binghamton.ed [Department of Chemistry, Center for Advanced Sensors and Environmental Monitoring (CASE), State University of New York-Binghamton, P.O. Box 6000, Binghamton, NY 13902 (United States); Mwilu, Samuel K.; Aluoch, Austin [Department of Chemistry, Center for Advanced Sensors and Environmental Monitoring (CASE), State University of New York-Binghamton, P.O. Box 6000, Binghamton, NY 13902 (United States)

2010-05-30

The specificity, simplicity, and inherent miniaturization afforded by advances in modern electronics have allowed electrochemical sensors to rival the most advanced optical protocols. One major obstacle in implementing electrochemistry for studying biomolecular reaction is its inadequate sensitivity. Recent reports however showed unprecedented sensitivities for biomolecular recognition using enhanced electronic amplification provided by new classes of electrode materials (e.g. carbon nanotubes, metal nanoparticles, and quantum dots). Biosensor technology is one area where recent advances in nanomaterials are pushing the technological limits of electrochemical sensitivities, thus allowing for the development of new sensor chemistries and devices. This work focuses on our recent work, based on metal-enhanced electrochemical detection, and those of others in combining advanced nanomaterials with electrochemistry for the development of smart sensors for proteins, nucleic acids, drugs and cancer cells.

Smart electrochemical biosensors: From advanced materials to ultrasensitive devices

International Nuclear Information System (INIS)

Sadik, Omowunmi A.; Mwilu, Samuel K.; Aluoch, Austin

2010-01-01

The specificity, simplicity, and inherent miniaturization afforded by advances in modern electronics have allowed electrochemical sensors to rival the most advanced optical protocols. One major obstacle in implementing electrochemistry for studying biomolecular reaction is its inadequate sensitivity. Recent reports however showed unprecedented sensitivities for biomolecular recognition using enhanced electronic amplification provided by new classes of electrode materials (e.g. carbon nanotubes, metal nanoparticles, and quantum dots). Biosensor technology is one area where recent advances in nanomaterials are pushing the technological limits of electrochemical sensitivities, thus allowing for the development of new sensor chemistries and devices. This work focuses on our recent work, based on metal-enhanced electrochemical detection, and those of others in combining advanced nanomaterials with electrochemistry for the development of smart sensors for proteins, nucleic acids, drugs and cancer cells.

External versus Internal Distraction Devices in Treatment of Obstructive Sleep Apnea in Craniofacial Anomalies.

Science.gov (United States)

Rachmiel, Adi; Nseir, Saleh; Emodi, Omri; Aizenbud, Dror

2014-07-01

Obstructive sleep apnea is often associated with congenital craniofacial malformations due to hypoplastic mandible and decreased pharyngeal airway. In this study, we will compare external and internal distraction devices for mandibular lengthening in terms of effectiveness, results, patient comfort, and complications. Thirty-seven patients were treated by bilateral mandibular distraction osteogenesis for obstructive sleep apnea: 20 with external and 17 with internal distraction devices. Lengthening of the mandible and increase of the pharyngeal airway were obtained in all patients. Using the external devices, the average mandibular elongation was 30 mm versus 22 mm with the internal devices; however, after 1 year, the results were more stable with internal devices. External devices carried greater risk for pin tract infection than the internal devices (27.5% vs 5.88%). In addition, pin loosening in 22.5% required pin replacement or led to reduced retention period. Internal devices had a precise and predictable vector of lengthening and left less visible scars at the submandibular area but carried the disadvantage of requiring a second operation for device removal. In very young children with severe micrognathia, it was impossible to place internal devices, and external devices were used. Internal devices should be the first choice because they are more comfortable to the patients, more predictable vector of lengthening, are less vulnerable to dislodgement, and leave reduced scarring, with the great disadvantage of second operation for removal. However, external devices still should be considered mainly in severely hypoplastic cases, and the surgeon should be prepared for both options.

Assessment of the relationship between the mandibular third molar and the mandibular canal using panoramic radiograph and cone beam computed tomography

International Nuclear Information System (INIS)

Jung, Yun Hoa; Nah, Kyung Soo; Cho, Bong Hae

2008-01-01

The purpose of this study is to evaluate the position of the mandibular canal in relation to the mandibular third molar by cone beam CT in cases showing a close relationship between the third molar and the mandibular canal on the panoramic radiograph. The panoramic images and cone beam CT scans of 87 impacted mandibular third molars in 60 patients were evaluated to assess the tooth relationship to the mandibular canal. The clearness of the canal wall and the vertical depth of the lower third molar were evaluated on panoramic radiographs. The lower third molars were assessed using cone beam CT to determine the proximity and position of the canal relative to the roots. In the 66 cases where the canal wall was unclear on the panoramic radiographs, 58 (87.9%) of the third molars had contact between the canal and root; 34 (51.5%) canals were showed an inferior position and 22 (33.3%) showed a linguoinferior position on cone beam CT. Interruption of the canal wall on panoramic radiographs was highly predictive of contact between the mandibular canal and the third molar. Cross sectional CT may be indicated for localization of the mandibular canal in such cases.

Mandibular condyle position in cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Hwang, Hyoung Joo; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan [Kyung Hee Univ. School of Dentistry, Seoul (Korea, Republic of)

2006-06-15

To evaluate position of the mandibular condyle within articular fossa in an asymptomatic population radiographically by a cone beam computed tomography. Cone beam computed tomography of 60 temporomandibular joints was performed on 15 males and 15 females with no history of any temporomandibular disorders, or any other orthodontic or photoconductors treatments. Position of mandibular condyle within articular fossa at centric occlusion was evaluated. A statistical evaluation was done using a SPSS. In the sagittal views, mandibular condyle within articular fossa was laterally located at central section. Mandibular condyles in the right and left sides were showed asymmetric positional relationship at medial, central, and lateral sections. Mandibular condyle within articular fossa in an asymptomatic population was observed non-concentric position in the sagittal and coronal views.

Nanostructured materials for advanced energy conversion and storage devices

Science.gov (United States)

Aricò, Antonino Salvatore; Bruce, Peter; Scrosati, Bruno; Tarascon, Jean-Marie; van Schalkwijk, Walter

2005-05-01

New materials hold the key to fundamental advances in energy conversion and storage, both of which are vital in order to meet the challenge of global warming and the finite nature of fossil fuels. Nanomaterials in particular offer unique properties or combinations of properties as electrodes and electrolytes in a range of energy devices. This review describes some recent developments in the discovery of nanoelectrolytes and nanoelectrodes for lithium batteries, fuel cells and supercapacitors. The advantages and disadvantages of the nanoscale in materials design for such devices are highlighted.

Pediatric mandibular fractures.

Science.gov (United States)

Schweinfurth, J M; Koltai, P J

1998-01-01

Over the last 20 years, a revolution in the management of facial fractures has taken place. Refinements in biocompatible materials of great delicacy and strength along with advances in our understanding of biomechanics of the face, have rendered complex injuries consistently amenable to accurate 3-dimensional reconstruction. Furthermore, with the availability of education in the techniques of internal rigid fixation, these advanced techniques have become routine practice in adults. However, the suitability of rigid internal fixation for children remains controversial. There are many concerns about the effect of implanted hardware in the mandible of a growing child. In addition, some evidence suggests that the elevation of functional matrix off of bone may result in alterations in development. The goal is to restore the underlying bony architecture to its pre-injury position in a stable fashion, with a minimal of aesthetic and functional impairment. However, in children the treatment of bony injuries is most easily accomplished by techniques that may adversely effect craniofacial development. While it is not entirely possible to resolve this dilemma, there exists an extensive body of experimental and clinical information on the appropriate management of pediatric mandibular fractures which can be used to formulate a rational treatment plan for most cases. This paper presents an overview of the contemporary understanding and application of these treatment principles.

Apnea obstructiva del sueño: un abordaje innovador mínimamente invasivo mediante distracción de rama mandibular

Directory of Open Access Journals (Sweden)

Pilar Rubio-Bueno

2018-04-01

bilateral internal ramus distraction osteogenesis of the mandible is presented. After a careful virtual 3 D planning, mandibular distraction surgery is performed under general anaesthesia and endoscopic assistance, using a major ambulatory surgery protocol, with the patient being discharged home the same day. After an initial latency of 5 days, the ascending ramus is gradually lengthened vertically during a period varying between 10 and 50 days, at a rate of 0.5 mm to 1 mm daily, until an apnoea-hypopnoea index below 5/h is achieved (cure level, and/or a negative overjet > 10 mm is reached.Titration of the procedure according to clinical criteria with the assistance of polygraphy and/or polysomnography allows the clinician to customise the mandibular advancement to each particular case. After a mandibular ramus lengthening ranging between 10 and 25 mm, the distraction devices are kept in place for 6 months after completion of the consolidation period.Bilateral internal ramus distraction is a highly effective surgical technique in curing obstructive sleep apnoea in adults with or without retrognathia, and could be indicated even in patients with comorbidities, such as cardiovascular disease or morbid obesity, in which a major surgical procedure, i.e. conventional maxillomandibular advancement, should be discouraged. Palabras clave: Apnea obstructiva del sueño, Alteraciones respiratorias del sueño, Cirugía ortognática, Obstrucción respiratoria, Distracción osteogénica mandibular, Cirugía mínimamente invasiva, Avance maxilomandibular, Keywords: Obstructive sleep apnoea, Sleep-disordered breathing, Orthognathic surgery, Respiratory obstruction, Mandibular distraction osteogenesis, Minimally invasive surgery, Maxillomandibular advancement

Reliability of mandibular canines as indicators for sexual dichotomy.

Science.gov (United States)

Hosmani, Jagadish V; Nayak, Ramakant S; Kotrashetti, Vijayalakshmi S; S, Pradeep; Babji, Deepa

2013-02-01

Amongst the various calcified structures in the human body, teeth have gained lot of popularity in estimating the sex of an individual as they are highly resistant to destruction and decomposition. Using permanent mandibular canines many researchers have predicted a high level of accuracy in identifying the sex correctly. The purpose of our study was to gauge the effectiveness of mandibular canines in discerning sex. Fifty dental casts each of males and females were utilized for the study. Mesio-distal dimension and inter-canine distance of mandibular right and left canine was recorded using digital vernier caliper and mandibular canine index was calculated. The mean value of mesio-distal dimensions of right and left mandibular canine was slightly greater in males compared to females. The mandibular canine index was equal in both sexes. Inter-canine distance was marginally higher in males compared to females. Despite of higher values in males none of the parameters were statistically significant. The results herein bolster contemporary studies that mesio-distal dimensions of mandibular canines and mandibular canine index do not reflect sexual dimorphism and that its application should be discontinued in sex prediction among Indian populations. How to cite this article: Hosmani J V, Nayak R S, Kotrashetti V S, Pradeep S, Babji D. Reliability of Mandibular Canines as Indicators for Sexual Dichotomy. J Int Oral Health 2013; 5(1):1-7.

Nanoscale Copper and Copper Compounds for Advanced Device Applications

Science.gov (United States)

Chen, Lih-Juann

2016-12-01

Copper has been in use for at least 10,000 years. Copper alloys, such as bronze and brass, have played important roles in advancing civilization in human history. Bronze artifacts date at least 6500 years. On the other hand, discovery of intriguing properties and new applications in contemporary technology for copper and its compounds, particularly on nanoscale, have continued. In this paper, examples for the applications of Cu and Cu alloys for advanced device applications will be given on Cu metallization in microelectronics devices, Cu nanobats as field emitters, Cu2S nanowire array as high-rate capability and high-capacity cathodes for lithium-ion batteries, Cu-Te nanostructures for field-effect transistor, Cu3Si nanowires as high-performance field emitters and efficient anti-reflective layers, single-crystal Cu(In,Ga)Se2 nanotip arrays for high-efficiency solar cell, multilevel Cu2S resistive memory, superlattice Cu2S-Ag2S heterojunction diodes, and facet-dependent Cu2O diode.

Mandibular Deformity Correction by Distraction Osteogenesis

Directory of Open Access Journals (Sweden)

Md Asaduzzaman

2011-02-01

Full Text Available Distraction osteogenesis (DO is a biological process of new bone formation. It could be used as an alternative treatment method for the correction of mandibular hypoplastic deformity. Modern distraction osteogenesis evolved primarily from the work of Gavriel llizarov. DO has been first applied to craniofacial region since McCarthy et al. In this case report, the patient was 17 years old male with bird face deformity due to hypoplasia of mandible resulted from bilateral TMJ ankylosis due to the fracture of both condyle at the age of 4 years. Patient’s intraincisal opening was absent 1 year back. He underwent condylectomy in both sides to release the ankylosis and to increase intraincisal opening. His mandibular length was markedly short. To increase his mandibular antero-posterior length, mandibular body distraction was done in Oral and Maxillofacial Surgery department, BSMMU. Through this procedure length of the body of mandibule was increased by 10 mm, occlusion was edge to edge and his lower facial appearance increased markedly. Mandibular body distraction osteogenesis was considerably effective when performed in a hypoplastic mandible to facilitate post-operative functional and esthetic restoration. Long term follow-up is necessary to evaluate relapse and complications. DOI: 10.3329/bsmmuj.v3i2.7061BSMMU J 2010; 3(2: 103-106

Bone-anchored maxillary expansion and bilateral interoral mandibular distraction osteogenesis in adult with severe obstructive sleep apnea syndrome.

Science.gov (United States)

Nie, Ping; Zhu, Min; Lu, Xiao-Feng; Fang, Bing

2013-05-01

Severe obstructive sleep apnea syndrome (OSAS) threatens patients' lives. To solve ventilation problem, snoring, and avoid another orthognathic surgery for mandibular advancement, bone-anchored rapid maxillary expansion and bilateral interoral mandibular distraction osteogenesis were tried on a 20-year-old Chinese male patient with severe skeletal class II malocclusion and OSAS.The patient had polysomnography (apnea-hypopnea index 54.2), body mass index measurement (19.7 kg/m), and cephalometry before the treatment. Bone-anchored rapid maxillary expansion was performed for the correction of maxillary transverse and minor sagittal deficiency and the improvement of nasal airflow by decreasing nasal resistance. Bilateral interoral mandibular distraction osteogenesis was operated to lengthen the small, retruded mandible by 15 mm. Orthodontic treatment after the maxillary expansion and mandibular distraction osteogenesis can help obtain stable occlusion.The Epworth Sleepiness Scale, a questionnaire for temporomandibular joint, cephalometric analysis, polysomnography, acoustic rhinometry, and multislice spiral computed tomography were performed to evaluate changes from the treatment. All the results showed that the patient had a significantly alleviated OSAS. In addition, an acceptable occlusion was also obtained.

Malignant mandibular tumors: two case reports of rare mandibular ...

African Journals Online (AJOL)

Arun Kumar Agnihotri

2014-02-26

Feb 26, 2014 ... present two cases of rare malignant mandibular tumors in a single institution. KEY WORDS: .... Spiculated osteoblastic periosteal reaction was noted with mild ... displacement of right 2nd premolar and 2nd molar teeth were ...

Bilateral pediatric mandibular distraction for micrognathia with temporomandibular joint ankylosis and sleep apnea

Directory of Open Access Journals (Sweden)

S M Balaji

2017-01-01

Full Text Available Mandibular retrognathism is one of the important contributing anatomical factors to the obstructive sleep apnea (OSA. Such patients suffer from number of apneic or hypopneic events during sleep such as snoring, daytime sleepiness, fatigue, inability to concentrate, and irritability. Distraction osteogenesis is a less invasive surgical technique in the management of OSA by correcting the reduced airway space. Apart from correcting functional disturbances due to OSA, it also corrects the facial profile resulting in the substantial improvement in cosmetic appearance. We report a case of a 3-year-old boy who was struggling with severe retrognathic chin and OSA causing hypopneic episodes and snoring. He was successfully treated by bilateral mandibular distraction which resulted in significant improvement of respiratory distress and feeding as well as evidential advancement of the mandible was achieved.

Mandibular Bone and Soft Tissues Necrosis Caused by an Arsenical Endodontic Preparation Treated with Piezoelectric Device

Directory of Open Access Journals (Sweden)

A. Giudice

2013-01-01

Full Text Available This paper describes a case of wide mandibular bone necrosis associated with significant soft tissues injury after using an arsenical endodontic preparation in the right lower second molar for endodontic purpose. Authors debate about the hazardous effects of the arsenic paste and the usefulness of piezosurgery for treatment of this drug related bone necrosis.

The efficacy of supplemental intraosseous anesthesia after insufficient mandibular block

Directory of Open Access Journals (Sweden)

Samir Prohić

2005-02-01

Full Text Available It is a well-known scientific fact that only a small percentage of infiltration of inferior alveolar nerve is clinically proven to be efficient. The objective of this study was to determine the anesthetic efficacy of supplemental intraosseous injection, used after the insufficient classical mandibular block that didn't provide deep pulp anesthesia of mandibular molar planed for extraction. The experimental teeth consisted of 98 mandibular molars with clinical indication for extraction. Based on the history of disease, we indicated the extraction of the tooth. After that each tooth was tested with a electric pulp tester P1. We tested the pulp vitality and precisely determined the level of vitality. After that, each patient received classical mandibular block, and the pulp vitality was tested again. If the pulp tester indicated negative vitality for the certain mandibular molar, and the patient didn't complain about pain or discomfort during the extraction, the molar was extracted and the result was added to anesthetic success rate for the classical mandibular block. If, five minutes after receiving the mandibular block, the pulp tester indicated positive vitality (parameters of vitality or the patient complained about pain or discomfort (parameters of pain and discomfort, we used the Stabident intraosseous anesthesia system. Three minutes after the application of supplemental intraosseous injection the molar was tested with the pulp tester again. The anesthetic solution used in both anesthetic techniques is lidocaine with 1:100.000 epinephrine. The results of this study indicate that the anesthetic efficacy of the mandibular block is 74.5%, and that supplemental intraosseous anesthesia, applied after the insufficient mandibular block, provides pulpal anesthesia in 94.9% of mandibular molars. The difference between anesthetic efficacy of the classical mandibular block and anesthetic efficacy of the supplemental intraosseous anesthesia, applied

The efficacy of supplemental intraosseous anesthesia after insufficient mandibular block.

Science.gov (United States)

Prohić, Samir; Sulejmanagić, Halid; Secić, Sadeta

2005-02-01

It is a well-known scientific fact that only a small percentage of infiltration of inferior alveolar nerve is clinically proven to be efficient. The objective of this study was to determine the anesthetic efficacy of supplemental intraosseous injection, used after the insufficient classical mandibular block that didn't provide deep pulp anesthesia of mandibular molar planed for extraction. The experimental teeth consisted of 98 mandibular molars with clinical indication for extraction. Based on the history of disease, we indicated the extraction of the tooth. After that each tooth was tested with a electric pulp tester P1. We tested the pulp vitality and precisely determined the level of vitality. After that, each patient received classical mandibular block, and the pulp vitality was tested again. If the pulp tester indicated negative vitality for the certain mandibular molar, and the patient didn't complain about pain or discomfort during the extraction, the molar was extracted and the result was added to anesthetic success rate for the classical mandibular block. If, five minutes after receiving the mandibular block, the pulp tester indicated positive vitality (parameters of vitality) or the patient complained about pain or discomfort (parameters of pain and discomfort), we used the Stabident intraosseous anesthesia system. Three minutes after the application of supplemental intraosseous injection the molar was tested with the pulp tester again. The anesthetic solution used in both anesthetic techniques is lidocaine with 1:100.000 epinephrine. The results of this study indicate that the anesthetic efficacy of the mandibular block is 74.5%, and that supplemental intraosseous anesthesia, applied after the insufficient mandibular block, provides pulpal anesthesia in 94.9% of mandibular molars. The difference between anesthetic efficacy of the classical mandibular block and anesthetic efficacy of the supplemental intraosseous anesthesia, applied after the

Topographical evaluation of the mandibular canal through panoramic radiograph

Directory of Open Access Journals (Sweden)

Ingrid Macedo Oliveira

2016-10-01

Full Text Available The mandibular canal is located inside the body of the mandible and may have anatomical variations. The topographic knowledge of the mandibular canal by the Dental surgeons is fundamental to achieving success in surgical planning, anesthetics and clinical interventions involving the jaw. To study the anatomy of the mandibular canal through panoramic radiographs. A retrospective descriptive study, developed after review and approval by the Ethics and Research Committee with the number of opinion 431095. Were analyzed 252 panoramic radiographs of patients of male and female attended in dental clinics UNINOVAFAPI University Center, Teresina-Pi, Brazil. The radiographs were analyzed with the aid of a light box and each antimere the jaw was observed separately. The classification of Nortjé and Langlais for description of the topography of the mandibular canal were used. Descriptive statistical analysis was performed with SPSS version 18.0. There was a prevalence of 38.89% in both antimeres, of mandibular channel the Type II. The type IV was present in 25.4% in the right hemi-arch and 26.6% on the left. Mandibular canal with unilateral bifurcation was observed in 0.77% of the sample and molar straight channel has not been identified. We observed anatomical variations as for the number and path, of the mandibular canal with the highest prevalence of Types II and IV, and the absence of bifurcations. Most was mandibular channels showed no bifurcation. The panoramic radiograph showed up an aid important to identify the mandibular canal and its variations.

Prosthodontic management of mandibular deviation using palatal ramp appliance

Directory of Open Access Journals (Sweden)

Prince Kumar

2012-08-01

Full Text Available Segmental resection of the mandible generally results in deviation of the mandible to the defective side. This loss of continuity of the mandible destroys the balance of the lower face and leads to decreased mandibular function by deviation of the residual segment toward the surgical site. Prosthetic methods advocated to reduce or eliminate mandibular deviation include intermaxillary fixation, removable mandibular guide flange, palatal ramp, implant-supported prosthesis and palatal guidance restorations which may be useful in reducing mandibular deviation and improving masticatory performance and efficiency. These methods and restorations would be combined with a well organized mandibular exercise regimen. This clinical report describes the rehabilitation following segmental mandibulectomy using palatal ramp prosthesis.

Skeletal maturity assessment using mandibular canine calcification stages

Directory of Open Access Journals (Sweden)

Vildana Džemidžić

2016-11-01

Full Text Available Objective. The aims of this study were: to investigate the relationship between mandibular canine calcification stages and skeletal maturity; and to evaluate whether the mandibular canine calcification stages may be used as a reliable diagnostic tool for skeletal maturity assessment. Materials and methods. This study included 151 subjects: 81 females and 70 males, with ages ranging from 9 to 16 years (mean age: 12.29±1.86 years. The inclusion criteria for subjects were as follows: age between 9 and 16 years; good general health without any hormonal, nutritional, growth or dental development problems. Subjects who were undergoing or had previously received orthodontic treatment were not included in this study. The calcification stages of the left permanent mandibular canine were assessed according to the method of Demirjian, on panoramic radiographs. Assessment of skeletal maturity was carried out using the cervical vertebral maturation index (CVMI, as proposed by the Hassel-Farman method, on lateral cephalograms. The correlation between the calcification stages of mandibular canine and skeletal maturity was estimated separately for male and female subjects. Results. Correlation coefficients between calcification stages of mandibular canine and skeletal maturity were 0.895 for male and 0.701 for female subjects. Conclusions. A significant correlation was found between the calcification stages of the mandibular canine and skeletal maturity. The calcification stages of the mandibular canine show a satisfactory diagnostic performance only for assessment of pre-pubertal growth phase.

Piezosurgery for the lingual split technique in mandibular third molar removal: a suggestion.

Science.gov (United States)

Pippi, Roberto; Alvaro, Roberto

2013-03-01

The lingual split technique is a surgical procedure for extraction of impacted mandibular third molar throughout a lingual approach. The main disadvantage of this technique is the high rate of temporary lingual nerve injury mainly because of the trauma induced by the lingual flap retraction. The purpose of this paper is to suggest the use of piezosurgery in performing the lingual cortical plate osteotomy of the third molar alveolar process. Surgical procedure was performed under general anesthesia, and it lasted approximately 60 minutes. After the buccal and lingual full-thickness flaps were incised and elevated, a piezosurgical device was used for osteotomy. A well-defined bony window was then removed, and it allowed the entire tooth was extracted in a lingual direction. The patient did not show any neurological postoperative complication. Lingual and inferior alveolar nerve functionality was normal before as well as after surgery. The use of piezoelectric surgery seems to be a good option in removing lower third molars when a lingual access is clearly indicated. The only disadvantage of this technique can be represented by an operating time lengthening possibly because of a lower power cut of the piezoelectric device, to the high mineralization of the mandibular cortical bone and to the use of inserts with a low degree of sharpening.

Combined maxillary and mandibular distraction osteogenesis in patients with hemifacial microsomia.

Science.gov (United States)

Sant'Anna, Eduardo Franzotti; Lau, Geórgia W T; Marquezan, Mariana; de Souza Araújo, Mônica Tirre; Polley, John W; Figueroa, Alvaro A

2015-05-01

Hemifacial microsomia is a deformity of variable expressivity with unilateral hypoplasia of the mandible and the ear. In this study, we evaluated skeletal soft tissue changes after bimaxillary unilateral vertical distraction. Eight patients (4 preadolescents 4 adolescents) each with a grade II mandibular deformity underwent a LeFort I osteotomy and an ipsilateral horizontal mandibular ramus osteotomy. A semiburied distraction device was placed over the ramus, and intermaxillary fixation was applied. Anteroposterior cephalometric and frontal photographic analyses were conducted before and after distraction. Statistics were used to analyze the preoperative and postoperative changes. Cephalometrically, the nasal floor and the occlusal and gonial plane angles decreased. The ratios of affected-unaffected ramus and gonial angle heights improved by 15% and 20%, respectively. The position of menton moved toward the midline. The photographic analysis showed a decrease of the nasal and commissure plane angles, and the chin moved to the unaffected side. The parallelism between the horizontal skeletal and soft tissue planes improved, with an increase in the affected side ramus height and correction of the chin point toward the midline. Simultaneous maxillary and mandibular distraction improved facial balance and symmetry. Patients in the permanent dentition with fixed orthodontic appliances and well-aligned dental arches responded well to this intervention. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Maximizing mandibular prosthesis stability utilizing linear occlusion, occlusal plane selection, and centric recording.

Science.gov (United States)

Williamson, Richard A; Williamson, Anne E; Bowley, John; Toothaker, Randy

2004-03-01

The stability of mandibular complete dentures may be improved by reducing the transverse forces on the denture base through linear (noninterceptive) occlusion, selecting an occlusal plane that reduces horizontal vectors of force at occlusal contact, and utilizing a central bearing intraoral gothic arch tracing to record jaw relations. This article is intended to acquaint the reader with one technique for providing stable complete denture prostheses using the aforementioned materials, devices, and procedures.

Osteogénesis por distracción en defectos mandibulares y su estabilidad esquelética a los 2 años de tratados Osteogenesis by distraction in mandibular defects and skeletal stability after two years of treatment

Directory of Open Access Journals (Sweden)

Dadonim Vila Morales

2011-03-01

Full Text Available El presente estudio tiene como objetivo mostrar los resultados de la estabilidad esquelética a los 2 años de operados, de los primeros pacientes con hipoplasias mandibulares tratados con distracción osteogénica en nuestro país. Se trataron 11 hemimandíbulas en 7 pacientes con distracción osteogénica mandibular, con distractores marca Leibinger. El periodo de latencia fue de 72 horas, la distracción mandibular se aplicó a razón de 1,0 mm cada 12 horas y la contención fue de 8 semanas. Luego se inició el tratamiento ortodóncico posquirúrgico. Se evaluaron los resultados a través de estudios cefalométricos antes de la intervención, luego y a los 2 años del tratamiento hubo cambios esqueléticos posoperatorios significativos en las mediciones angulares cefalométricas SNB y ANB, con pTo show the results of the skeletal stability after 2 years of to be operated on from the first patients presenting with mandibular hypoplasias treated with osteogenic distraction in our country. Eleven hemi-mandibles in 7 patients using mandibular osteogenic distraction with Leibinger distraction device. Latency period was of 72 hours, mandibular distraction was applied at a rate of 1,0 mm each 12 hours and fixation was of 8 weeks. Then, postsurgical orthodontic treatment was started. There were significant postoperative skeletal changes. Results were assessed by cephalometry studies before intervention, after and at 2 years of treatment. Also, there were significant postoperative skeletal changes in SNB and ANB with p< 0,05. The arithmetic mean of the osteodistraction achieve in branch was of 7,5 mm and in the body it was of 8,0 mm. At 2 years there remain a mandibular bone stability of 88,8 % qualified as good. Occlusal changes were favorable. There were not complications involving the good course of patients treated. It was shown that the bone distraction is an effective method for treatment of mandibular defects.

Ultrasound and multidetector computed tomography of mandibular ...

African Journals Online (AJOL)

Because of local invasivity and high metastatic potential, preoperative imaging evaluation of mandibular region and tumoral staging is essential along with biopsy sampling. The present manuscript describes the ultrasound and computed tomographic imaging findings of mandibular gland adenocarcinoma in two dogs and ...

Influence of mandibular length on mouth opening

NARCIS (Netherlands)

Dijkstra, PU; Hof, AL; Stegenga, B; De Bont, LGM

Theoretically, mouth opening not only reflects the mobility of the temporomandibular joints (TMJs) but also the mandibular length. Clinically, the exact relationship between mouth opening, mandibular length, and mobility of TMJs is unclear. To study this relationship 91 healthy subjects, 59 women

Incidence and characteristics of mandibular accessory canals: A radiographic investigation.

Science.gov (United States)

Borgonovo, Andrea Enrico; Taschieri, Silvio; Vavassori, Virna; Re, Dino; Francetti, Luca; Corbella, Stefano

2017-11-01

The aim of the present study was to explore, through tridimensional reconstructions of cone-beam computed tomography (CBCT) scans, the presence and the characteristics of mandibular accessory canals. For each included participant, the presence of accessory canals was recorded. The diameter of the canal, as well as the distance between the canal walls and the walls of the mandibular bone (lingual, buccal, cranial and caudal), were measured and recorded. Mandibular accessory canals could be found in 8.8% of participants. Retromolar canals were the most frequently found accessory mandibular canals. Accessory mandibular canals were found in a relatively high number of participants through the examination of CBCT scans and tridimensional reconstruction. The presence of such structures should be considered cautiously when planning and performing surgical interventions in mandibular area. © 2017 John Wiley & Sons Australia, Ltd.

Advanced single-wafer sequential multiprocessing techniques for semiconductor device fabrication

International Nuclear Information System (INIS)

Moslehi, M.M.; Davis, C.

1989-01-01

Single-wafer integrated in-situ multiprocessing (SWIM) is recognized as the future trend for advanced microelectronics production in flexible fast turn- around computer-integrated semiconductor manufacturing environments. The SWIM equipment technology and processing methodology offer enhanced equipment utilization, improved process reproducibility and yield, and reduced chip manufacturing cost. They also provide significant capabilities for fabrication of new and improved device structures. This paper describes the SWIM techniques and presents a novel single-wafer advanced vacuum multiprocessing technology developed based on the use of multiple process energy/activation sources (lamp heating and remote microwave plasma) for multilayer epitaxial and polycrystalline semiconductor as well as dielectric film processing. Based on this technology, multilayer in-situ-doped homoepitaxial silicon and heteroepitaxial strained layer Si/Ge x Si 1 - x /Si structures have been grown and characterized. The process control and the ultimate interfacial abruptness of the layer-to-layer transition widths in the device structures prepared by this technology will challenge the MBE techniques in multilayer epitaxial growth applications

Evaluation of the relationship between mandibular third molar and mandibular canal by different algorithms of cone-beam computed tomography.

Science.gov (United States)

Mehdizadeh, Mojdeh; Ahmadi, Navid; Jamshidi, Mahsa

2014-11-01

Exact location of the inferior alveolar nerve (IAN) bundle is very important. The aim of this study is to evaluate the relationship between the mandibular third molar and the mandibular canal by cone-beam computed tomography. This was a cross-sectional study with convenience sampling. 94 mandibular CBCTs performed with CSANEX 3D machine (Soredex, Finland) and 3D system chosen. Vertical and horizontal relationship between the mandibular canal and the third molar depicted by 3D, panoramic reformat view of CBCT and cross-sectional view. Cross-sectional view was our gold standard and other view evaluated by it. There were significant differences between the vertical and horizontal relation of nerve and tooth in all views (p < 0.001). The results showed differences in the position of the inferior alveolar nerve with different views of CBCT, so CBCT images are not quite reliable and have possibility of error.

Split-Framework in Mandibular Implant-Supported Prosthesis

Directory of Open Access Journals (Sweden)

Danny Omar Mendoza Marin

2015-01-01

Full Text Available During oral rehabilitation of an edentulous patient with an implant-supported prosthesis, mandibular flexure must be considered an important biomechanical factor when planning the metal framework design, especially if implants are installed posterior to the interforaminal region. When an edentulous mandible is restored with a fixed implant-supported prosthesis connected by a fixed full-arch framework, mandibular flexure may cause needless stress in the overall restorative system and lead to screw loosening, poor fit of prosthesis, loss of the posterior implant, and patient’s discomfort due to deformation properties of the mandible during functional movements. The use of a split-framework could decrease the stress with a precise and passive fit on the implants and restore a more natural functional condition of the mandible, helping in the longevity of the prosthesis. Therefore, the present clinical report describes the oral rehabilitation of an edentulous patient by a mandibular fixed implant-supported prosthesis with a split-framework to compensate for mandibular flexure. Clinical Significance. The present clinical report shows that the use of a split-framework reduced the risk of loss of the posterior implants or screws loosening with acceptable patient comfort over the period of a year. The split-framework might have compensated for the mandibular flexure during functional activities.

Pediatric mandibular fractures treated by rigid internal fixation.

Science.gov (United States)

Wong, G B

1993-09-01

Mandibular fractures in the pediatric patient population are relatively uncommon. These patients present with their own unique treatment requirements. Most fractures have been treated conservatively by dental splints. Closed reduction techniques with maxillomandibular fixation (MMF) in very young children can pose several concerns, including cooperation, compliance and adequate nutritional intake. Rigid internal fixation of unstable mandibular fractures using miniplates and screws circumvents the need for MMF and allows immediate jaw mobilization. At major pediatric trauma institutions, there has been an increasing trend toward the use of this treatment when open reduction is necessary. This article presents a report of a five-year-old child who presented with bilateral mandibular fractures and was treated by rigid internal fixation and immediate mandibular mobilization.

Bifid mandibular canal: a rare or underestimated entity?

Directory of Open Access Journals (Sweden)

Ibrahim Nasseh

2016-10-01

Full Text Available One of the rare anatomical variations that can be of significant importance for the dentist is the bifid mandibular canal. Many complications can occur from this condition such as failure of anesthesia when performing inferior alveolar nerve block, difficulties during the surgical extraction of the third mandibular molar, and during implants placement. Therefore, good knowledge of this condition is essential. In this report, we describe the radiographic finding of a unilateral bifid mandibular canal.

Modified Labial Button Technique for Maintaining Occlusion After Caudal Mandibular Fracture/Temporomandibular Joint Luxation in the Cat.

Science.gov (United States)

Goodman, Alice E; Carmichael, Daniel T

2016-03-01

Maxillofacial trauma in cats often results in mandibular symphyseal separation in addition to injuries of the caudal mandible and/or temporomandibular joint (TMJ). Caudal mandibular and TMJ injuries are difficult to access and stabilize using direct fixation techniques, thus indirect fixation is commonly employed. The immediate goals of fixation include stabilization for return to normal occlusion and function with the long-term objective of bony union. Indirect fixation techniques commonly used for stabilization of caudal mandibular and temporomandibular joint fracture/luxation include maxillomandibular fixation (MMF) with acrylic composite, interarcade wiring, tape muzzles, and the bignathic encircling and retaining device (BEARD) technique. This article introduces a modification of the previously described "labial reverse suture through buttons" technique used by Koestlin et al and the "labial locking with buttons" technique by Rocha et al. In cases with minimally displaced subcondylar and pericondylar fractures without joint involvement, the labial button technique can provide sufficient stabilization for healing. Advantages of the modified labial button technique include ease of application, noninvasive nature, and use of readily available materials. The construct can remain in place for a variable of amount of time, depending on its intended purpose. It serves as an alternative to the tape muzzle, which is rarely tolerated by cats. This technique can be easily used in conjunction with other maxillomandibular repairs, such as cerclage wire fixation of mandibular symphyseal separation. The purpose of this article is to demonstrate a modified labial button technique for maintaining occlusion of feline caudal mandibular fractures/TMJ luxations in a step-by-step fashion.

Aplicación de distracción osteogénica mandibular en niños con el síndrome de apnea obstructiva del sueño Application of a mandibular osteogenic distraction in children with sleep obstructive apnea

Directory of Open Access Journals (Sweden)

Dadonim Vila Morales

2010-03-01

Full Text Available Objetivos: mostrar los resultados de los primeros pacientes con síndrome de apnea obstructiva del sueño (SAOS de tipo periférico esqueletal tratados en nuestro país con osteogénesis por distracción mandibular. Métodos: se trataron 9 pacientes con distracción osteogénica mandibular bilateral, con distractores marca Leibinger y Synthes. El periodo de latencia fue de 72 horas. La tasa de distracción mandibular, a razón de 1,0 mm cada 12 horas y la contención fue de 8 semanas. Luego se inició el tratamiento ortodóncico posquirúrgico. Se evaluaron los resultados a través de polisomnografía y estudios cefalométricos antes de la intervención, luego y al año del tratamiento. Resultados: el 89 % de los casos fueron curados, el 11 % tuvo mejoría. Dentro de las complicaciones encontradas, el 55 % de los pacientes presentaron limitación temporal de la apertura bucal, que remitió con fisioterapia, y dos pacientes necesitaron traqueostomía con fines anestésicos. Conclusiones: la osteogénesis por distracción mandibular resultó ser un método terapéutico eficaz para el tratamiento del SAOS de tipo periférico, esqueletal.Objectives: to show the results from the first patients presenting with sleep obstructive apnea syndrome (SOAS of skeletal peripheral type treated in our country with osteogenesis by mandibular distraction. Methods: Nine patients were treated with bilateral mandibular osteogenic distraction using Leibinger and Synthes distraction devices. Latency period was of 72 hours. Mandibular distraction rate at 1,0 mm each 12 hours and restraint was of 8 weeks. Then, postsurgical orthodontics treatment was started. Results were assessed by polysomnography and cephalometry studies before intervention, after it and at a year of treatment. Results: The 89 % of cases had a good recovery, the 11 % showed an improvement. Complications included: a temporary limitation of mouth opening in 55 % disappearing with physiotherapy and two

Orthodontic traction of a transmigrated mandibular canine using mini-implant: a case report and review.

Science.gov (United States)

Plaza, Sonia Patricia

2016-12-01

The patient in this case is an 11-year-old girl, whose mandibular left canine was transmigrated. The traction to the arch was assisted by using a temporary skeletal anchorage device. After 5 months of poor response to traction, the biomechanics were re-adjusted, obtaining effective traction in to the arch in 12 months. After this period, the treatment was completed with fixed orthodontic appliances.

Mandibular incisor apicoectomy in a Canadian Beaver.

Science.gov (United States)

Steenkamp, Gerhard; Venter, Leon; Crossley, David; Buss, Peter

2009-01-01

A 52-month-old Canadian beaver was presented for treatment of lip trauma resulting from overgrowth of the right mandibular incisor tooth following earlier loss of the right maxillary incisor tooth. Extraction of the affected tooth was considered, but rejected due to the length of the embedded portion of rodent mandibular incisor teeth. The lip injury was managed by crown reduction (odontoplasty) of the overgrowing incisor tooth pending a more permanent treatment plan. A 2-cm apicoectomy of the right mandibular incisor tooth was performed to arrest growth of the tooth when the beaver was 82-months-old. The remainder of the tooth continued to erupt and was completely expelled during a 9-month period with one additional odontoplasty being required. The beaver continued to feed normally with just the left maxillary and mandibular incisor teeth until its death at 118-months, with odontoplasty performed twice on the remaining incisor teeth during the 30-months following exfoliation.

A Mandibular Second Premolar with Three Canals and Atypical Orifices

Directory of Open Access Journals (Sweden)

Neha Agarwal

2013-01-01

Full Text Available Background: Mandibular second premolars with three canals (Type V, Vertucci and separate foramina are very rare. The anatomy of the pulp chamber floor in these premolars usually reveals one lingual and two buccal orifices at the same level. This case report describes a second premolar with three canals and an unusual pulpal floor anatomy with one mesiobuccal and one distobuccal orifice at the same level and an orifice on the distolingual wall. Very careful examination of the pulpal space with an optical device and preoperative spiral computed tomography is recommended to locate any unusual orifices.

Evaluation of mandibular morphology in different facial types

Directory of Open Access Journals (Sweden)

Rajat Mangla

2011-01-01

Full Text Available The purpose of this study was to evaluate mandibular morphology in different facial types using various parameters. This study was conducted on lateral cephalograms of a total of 110 subjects, which included 55 males and 55 females between the age of 18-25 years having a mean of 22.3 years for males and 21.5 years for females. The sample was divided into normodivergent, hypodivergent, and hyperdivergent subgroups based on Jarabak′s ratio. Symphysis height, depth, ratio (height/depth and angle, antegonial notch depth, ramal height and width, mandibular depth, upper, lower, and total gonial angle, and mandibular arc angle were analyzed statistically and graphically. It was found that the mandible with the vertical growth pattern was associated with a symphysis with large height, small depth, large ratio, small angle, decreased ramus height and width, smaller mandibular depth, increased gonial angle, and decreased mandibular arc angle in contrast to mandible with a horizontal growth pattern. Sexual dichotomy was found with mean symphysis height and depth in the female sample being smaller than in the male sample, but symphysis ratio was larger in the female sample; males having greater ramus height and width, mandibular depth than females. The mandible seemed to have retained its infantile characteristics with all its processes underdeveloped in hyperdivergent group.

Impacted mandibular third molars and their influence on mandibular angle and condyle fractures--a retrospective study.

Science.gov (United States)

Gaddipati, Rajasekhar; Ramisetty, Sudhir; Vura, Nandagopal; Kanduri, Rajeev Reddy; Gunda, Vinay Kumar

2014-10-01

Previous retrospective analyses prove that impacted mandibular third molars (M3s) increase the risk of angle fractures and decrease the risk of concomitant fractures to the condyle. A retrospective cohort was designed for patients reported to the Department of Oral and Maxillofacial Surgery from January 2011 till June 2013. The study variables are presence or absence of third molar, if it is present, their position, classified using the Pell and Gregory system; angulation, classified using Shiller's method. The outcome variables were angle and condyle fractures. Hospital records and panoramic radiographs were used to determine and classify these variables. The study sample comprised of 118 mandibular angle and condyle fractures in 110 patients. Database was constructed and analysed using SPSS version 10.0. This present retrospective study concluded that the presence of impacted third molar predisposes the angle to fracture and reduces the risk of a concomitant condylar fracture. However absence of impacted third molar increases the risk of condylar fracture. The highest incidence of angle fracture was observed in position A impacted mandibular third molars. And there is no significant relationship, concerning ramus position and angulation of impacted mandibular third molars with the angle fracture. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Resolution of neurosensory deficit after mandibular orthognathic surgery: A prospective longitudinal study.

Science.gov (United States)

Alolayan, Albraa Badr; Leung, Yiu Yan

2017-05-01

To investigate the longitudinal resolution of neurosensory deficit (NSD) and the possible risk factors that might contribute to NSD following mandibular orthognathic procedures. A prospective longitudinal observational study on patients who had mandibular orthognathic procedures was performed. Standardized neurosensory assessments were performed. The 2 years longitudinal resolution and risk factors of NSD including patients' age and gender, specific mandibular procedures and surgeons' experience were analyzed. 66 patients (44 females) with 132 sides of mandibular procedures were enrolled in the study. Surgical procedures included mandibular ramus surgery, anterior mandibular surgery, or the combination of the two. The overall occurrences of subjective NSD improved from 78.8% at postoperative 2 weeks to 13.8% at post-operative 2 years. Combinations of ramus surgery and anterior mandibular surgery increased the risk of NSD at the first three post-operative months (p orthognathic surgery. The occurrence of NSD after mandibular orthognathic procedures reduced progressively within the post-operative 2 years. Combination of mandibular ramus surgery and anterior mandibular surgery increased the risk of NSD in the early post-operative period. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Morphometric study on mandibular foramen and incidence of accessory mandibular foramen in mandibles of south Indian population and its clinical implications in inferior alveolar nerve block.

Science.gov (United States)

Shalini, R; RaviVarman, C; Manoranjitham, R; Veeramuthu, M

2016-12-01

The mandibular foramen is a landmark for procedures like inferior alveolar nerve block, mandibular implant treatment, and mandibular osteotomies. The present study was aimed to identify the precise location of the mandibular foramen and the incidence of accessory mandibular foramen in dry adult mandibles of South Indian population. The distance of mandibular foramen from the anterior border of the ramus, posterior border of the ramus, mandibular notch, base of the mandible, third molar, and apex of retromolar trigone was measured with a vernier caliper in 204 mandibles. The mean distance of mandibular foramen from the anterior border of ramus of mandible was 17.11±2.74 mm on the right side and 17.41±3.05 mm on the left side, from posterior border was 10.47±2.11 mm on the right side and 9.68±2.03 mm on the left side, from mandibular notch was 21.74±2.74 mm on the right side and 21.92±3.33 mm on the left side, from the base of the ramus was 22.33±3.32 mm on the right side and 25.35±4.5 mm on the left side, from the third molar tooth was 22.84±3.94 mm on the right side and 23.23±4.21 mm on the left side, from the apex of retromolar trigone was 12.27±12.13 mm on the right side and 12.13±2.35 mm on the left side. Accessory mandibular foramen was present in 32.36% of mandibles. Knowledge of location mandibular foramen is useful to the maxillofacial surgeons, oncologists and radiologists.

Advances in colloidal quantum dot solar cells: The depleted-heterojunction device

International Nuclear Information System (INIS)

Kramer, Illan J.; Pattantyus-Abraham, Andras G.; Barkhouse, Aaron R.; Wang, Xihua; Konstantatos, Gerasimos; Debnath, Ratan; Levina, Larissa; Raabe, Ines; Nazeeruddin, Md. K.; Graetzel, Michael; Sargent, Edward H.

2011-01-01

Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processibility with quantum size-effect tunability to match absorption with the solar spectrum. Recent advances in CQD photovoltaics have led to 3.6% AM1.5 solar power conversion efficiencies. Here we report CQD photovoltaic devices on transparent conductive oxides and show that our devices rely on the establishment of a depletion region for field-driven charge transport and separation. The resultant depleted-heterojunction solar cells provide a 5.1% AM1.5 power conversion efficiency. The devices employ infrared-bandgap size-effect-tuned PbS colloidal quantum dots, enabling broadband harvesting of the solar spectrum.

Sexual dimorphism of the internal mandibular chamber in Fayum Pliohyracidae (Mammalia)

Science.gov (United States)

de Blieux, D.D.; Baumrind, M.R.; Simons, E.L.; Chatrath, P.S.; Meyer, G.E.; Attia, Y.S.

2006-01-01

An internal mandibular fenestra and chamber are found in many fossil hyracoids. The internal mandibular fenestra is located on the lingual surface of the mandibular corpus and opens into a chamber within the mandible. The mandibular chamber is maximally developed in late Eocene Thyrohyrax meyeri and early Oligocene Thyrohyrax domorictus from the Fayum Province of Egypt. The function of this chamber is unknown as it is not found in extant hyraxes, nor is it known to occur in any other mammal. In Thyrohyrax, this feature appears to be sexually dimorphic because it is confined to roughly one half of the specimens that otherwise cannot be separated by dental characteristics or measurements. It has been suggested that the chamber is found in females based on the presumed distribution of this character in other fossil hyracoids. Fossils from Fayum Quarry L-41, preserving the sexually dimorphic anterior dentition, show that, in Thyrohyrax meyeri and Thyrohyrax domorictus, the internal mandibular chamber is found in males. In Thyrohyrax litholagus, an internal mandibular fenestra and inflated mandibular chamber occurs in males whereas females show the variable presence of an internal mandibular fossa or fenestra but lack an expanded chamber. Other genera show differing patterns of sexual variation in which some Fayum hyracoids have an internal mandibular fenestra in both sexes but with the greatest development of the mandibular chamber occurring in males. We review functions proposed for the internal mandibular chamber and suggest that it housed a laryngeal air sac that may have had a vocal function by acting as a resonating chamber. ?? 2006 by the Society of Vertebrate Paleontology.

Mandibular Condyle Fractures and Treatment Modalities

Directory of Open Access Journals (Sweden)

Halil ibrahim Kisa

2014-08-01

Full Text Available Maxillofacial injuries are most commonly associated with falls, motor and vehicle accidents, sports-related trauma, and interpersonel violence. The complexity of mandibular condyle region and its anatomic proximity to other craniofacial structures complicate diagnosis and treatment. Thus, treatment approaches of mandibular condyle fracture are still controversial. In the literature, different success rates are reported about observation versus treatment, closed reduction versus open reduction and fixation methods. In the present article, controversial issues related to mandibular condyle fractures were reviewed under the light of current literature. In conclusion, the simplest way that can be done with the least risk of complication should be chosen during treatment planning. In addition, current adjunctive treatment methods accelerating healing of fracture should be considered. [Archives Medical Review Journal 2014; 23(4.000: 658-671

Ion implantation in advanced planar and vertical devices

International Nuclear Information System (INIS)

Gossmann, Hans-Joachim L.

2005-01-01

The extent ('gate overlap') and slope ('abruptness') of the lateral junction are quickly replacing vertical junction depth as the most important physical junction metrics in advanced device architectures. This is in particular true for ultra-thin body devices, where the vertical junction is limited by a geometric constraint. The optimum gate overlap is quite small, or may even be negative, making a process without the need of high-tilt implantation feasible, even for dopant activation with negligible diffusion by flash annealing or laser thermal processing. Dopant activation by solid phase epitaxial regrowth might require high-tilt implants for a positive overlap. The use of such implants, however, is expected to lead to severe gate-poly and gate-oxide degradation. Scaling the 150 nm technology has drastically shrunk the overlap, accomplished by an equally aggressive reduction in thermal budget. For a 65 nm node device, a significant fraction of the overlap originates in the as-implanted dopant profile and the importance of diffusion is diminished. As a consequence small changes in the as-implanted profile are beginning to have a disproportionate impact on device characteristics. Small angular deviations of the incident beam from normal incidence, as seen by the wafer, lead to large changes in on-current. This can be alleviated significantly by a quad implant provided the tilt-angle is sufficiently large, in the order >5 deg.

Radiologic study of mandibular third molar of Korean youths

International Nuclear Information System (INIS)

Ahn, Hyung Kyu

1982-01-01

The author has made a study on the classification of the mandibular 3rd molars of Korean youths through dental radiography by means of Pell and Gregory's classification and on the prevalence of the dental caries of distal surface of the mandibular 2nd molar adjacent to the mandibular 3rd molars turned anteriorly. The results are as follow; 1. It was found that the largest case number was class I (272 cases, 52.9%) in the relation of the tooth to the ramus of the mandible and 2nd molar. 2. The mesio-angular position was the largest number (239 cases, 46.5%) in the relation of the long axis of the impacted mandibular 3rd molar to the long axis of the 2nd molar. 3. The mesio-angular position of class I was the largest number (140 cases, 27.2%) in the relation of the tooth to the ramus of the mandible and 2nd molar and the long axis of the impacted mandibular 3rd moral to the long axis of the 2nd molar. 4. The average angle of the long axis of mandibular 3rd molar in mesioangular position or horizontal position to the occlusal plane was 143 W 5. Mandibular 3rd molar with lesion such as dental cries or pericoronitis was 73 cases (14.2). 6. The caries incidence rate of the distal surface of the 2nd molar was about 3.1%.

Recent Advances in Conjugated Polymers for Light Emitting Devices

Science.gov (United States)

AlSalhi, Mohamad Saleh; Alam, Javed; Dass, Lawrence Arockiasamy; Raja, Mohan

2011-01-01

A recent advance in the field of light emitting polymers has been the discovery of electroluminescent conjugated polymers, that is, kind of fluorescent polymers that emit light when excited by the flow of an electric current. These new generation fluorescent materials may now challenge the domination by inorganic semiconductor materials of the commercial market in light-emitting devices such as light-emitting diodes (LED) and polymer laser devices. This review provides information on unique properties of conjugated polymers and how they have been optimized to generate these properties. The review is organized in three sections focusing on the major advances in light emitting materials, recent literature survey and understanding the desirable properties as well as modern solid state lighting and displays. Recently, developed conjugated polymers are also functioning as roll-up displays for computers and mobile phones, flexible solar panels for power portable equipment as well as organic light emitting diodes in displays, in which television screens, luminous traffic, information signs, and light-emitting wallpaper in homes are also expected to broaden the use of conjugated polymers as light emitting polymers. The purpose of this review paper is to examine conjugated polymers in light emitting diodes (LEDs) in addition to organic solid state laser. Furthermore, since conjugated polymers have been approved as light-emitting organic materials similar to inorganic semiconductors, it is clear to motivate these organic light-emitting devices (OLEDs) and organic lasers for modern lighting in terms of energy saving ability. In addition, future aspects of conjugated polymers in LEDs were also highlighted in this review. PMID:21673938

Combined orthognathic distraction procedure: Le Fort I maxillary osteotomy and mandibular curvilinear distraction osteogenesis. A new technique for craniofacial management.

Science.gov (United States)

Schendel, Stephen A; Hazan-Molina, Hagai; Aizenbud, Dror

2014-04-01

Dentofacial deformities are traditionally treated by maxillary and mandibular osteotomies conducted separately or simultaneously. Recently, distraction osteogenesis has become an irreplaceable part of the surgical armamentarium, for its ability to induce new bone formation between the surfaces of bone segments that are gradually separated by incremental traction, along with a simultaneous expansion of the surrounding soft-tissue envelope. The aim of this article is to describe a combined surgical technique consisting of simultaneous maxillary Le Fort I advancement and mandibular surgical repositioning by means of bilateral sagittal split osteotomy with a curvilinear distractor based on a preliminary computerized presurgical prediction.

Osteochondroma involving mandibular condyle

Directory of Open Access Journals (Sweden)

Latika Bachani

2017-01-01

Full Text Available Osteochondroma is defined as an osteocartilagenous exostosis with cartilage capped exophytic lesion that arises from the bone cortex. It is a slow growing benign tumor that is rarely seen in the maxillofacial region. Osteochondroma of the mandibular condyle is a relatively rare condition that causes a progressive enlargement of the condyle, usually resulting in facial asymmetry, temporomandibular joint (TMJ dysfunction and malocclusion. Radiographically, there is a unilaterally enlarged condyle usually with an exophytic growth of the tumor from the condylar head. The treatment of osteochondroma is primarily surgical resection of the tumor. This paper reports a case of osteochondroma of the right mandibular condyle presenting as a painless restricted mouth opening.

Mandibular kinematics after orthognathic surgical treatment a pilot study.

Science.gov (United States)

Sforza, Chiarella; Ugolini, Alessandro; Rocchetta, Davide; Galante, Domenico; Mapelli, Andrea; Giannì, Aldo Bruno

2010-03-01

We recorded three-dimensional mandibular movements, while the mouth was being opened and closed, using an optoelectronic motion analyser in 14 patients (5 skeletal Class II, 9 skeletal Class III) who were being assessed 7-49 months after orthognathic operations, and in 44 healthy subjects. All 14 patients had satisfactory healing on clinical examination, and function had been restored. Mandibular movement was divided into its rotational and translational components. On maximum mouth opening, the patients had significantly less total displacement of the mandibular interincisor point (p=0.05), and more mandibular movement that was explained by pure condylar rotation (p=0.006), than control subjects. There was no significant relation between maximum mouth opening and percentage rotation. While mandibular motion was well restored clinically by orthognathic surgery, the kinematics of the joint were modified. Larger studies and longitudinal investigations are necessary to appreciate the clinical relevance of the variations in condylar rotational and translational components.

Fixation of zygomatic and mandibular fractures with biodegradable plates

OpenAIRE

Degala, Saikrishna; Shetty, Sujeeth; Ramya, S

2013-01-01

Context: In this prospective study, 13 randomly selected patients underwent treatment for zygomatic?complex fractures (2 site fractures) and mandibular fractures using 1.5 / 2 / 2.5-mm INION CPS biodegradable plates and screws. Aims: To assess the fixation of zygomatic-complex and mandibular fractures with biodegradable copolymer osteosynthesis system. Materials and Methods: In randomly selected 13 patients, zygomatic-complex and mandibular fractures were plated using resorbable plates and sc...

Algorithm of imaging modalities in cases of mandibular fractures

International Nuclear Information System (INIS)

Mihailova, H.

2009-01-01

Mandibular fracture is the most common bone fracture of maxillo-facial trauma. Up to now the main method for examination of the mandible is radiography. The aim of the issue is to present an algorithm of imaging modalities for investigation of patients in cases of mandibular trauma. It consists of series of X ray techniques and views of the facial skull named mandibulo-facial. This standardizes mandibulo-facial series includes exactly determined four projections done by conventional X ray techniques: posterior-anterior view of skull (PA or AP), oblique view of the left mandible; oblique view of the right mandible; occipito-mental view. Using these four planned radiograms is obligatory for each mandibular trauma. Panoramic X-ray is obligatory in cases of apparatus availability; this abolish only oblique views (left and right). Occipito-mental view of the skull gives anatomically better the coronoid process of the mandible, the zygoma complex, the orbital edges and maxillar sinus than Waters projection. So mandibulo-facial series of four planned radiograms is not only for diagnostic of mandibular fractures, but as a screening of mandibulo-facial trauma too. Thus using algorithm of imaging modalities in cases of mandibular fracture leads to optimization of diagnostic process in patients with mandibular trauma. (author)

Chincup treatment modifies the mandibular shape in children with prognathism.

Science.gov (United States)

Alarcón, José Antonio; Bastir, Markus; Rosas, Antonio; Molero, Julia

2011-07-01

Although chincups are the preferred treatment for growing children with mandibular prognathism, the mechanism by which chincups improve this condition remains unclear. The aim of this study was to use geometric morphometrics to evaluate changes in the shape of the mandible of prognathic children treated with a chincup. Geometric morphometrics were used to evaluate the short-term mandibular shape changes in 50 prognathic children treated with chincups compared with 40 untreated matched controls. Twenty-one 2-dimensional mandibular landmarks from cephalograms taken before and after 36 months of treatment or observation were analyzed by Procrustes superimposition and thin plate spline. Permutation tests of the treated patients showed highly significant differences in the mandibular shapes before and after treatment, and compared with the control group after the observation period. The thin plate spline grid deformations indicated more rectangular mandibular configuration, forward condyle orientation, condyle neck compression, gonial area compression, and symphysis narrowing. Early chincup treatment widely modifies the mandibular shape of prognathic children to improve Class III malocclusion. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Augmented mandibular bone structurally adapts to functional loading

NARCIS (Netherlands)

Verhoeven, J. W.; Ruijter, J. M.; Koole, R.; de Putter, C.; Terlou, M.; Cune, M. S.

2013-01-01

Long-term changes in trabecular bone structure during the 10 years following onlay grafting with simultaneous mandibular implant placement were studied. Extraoral radiographs of both mandibular sides in eight patients were taken regularly. Bone structure was analysed using a custom-written image

Diagnostic ability of panoramic radiography for mandibular fractures

International Nuclear Information System (INIS)

Lee, Ji Hyun; Jung, Yun Hoa; Cho Bong Hae; Hwang, Dae Seok

2010-01-01

The purpose of this study was to evaluate the diagnostic efficacy of panoramic radiographs for detection of mandibular fractures. The sample was comprised of 65 patients (55 fractured, 10 non-fractured) with 92 fracture sites confirmed by multi-detector computed tomography (CT). Panoramic radiographs were evaluated for mandibular fractures by six examiners; two oral and maxillofacial radiologists (observer A and B), two oral and maxillofacial surgeons (observer C and D), and two general dentists (observer E and F). Sensitivity of panoramic radiography for mandibular fractures was 95.7% in observer A and B, 93.5% in observer C and D and 80.4% in observer E and F. The lowest sensitivity was shown in symphyseal/parasymphyseal areas, followed by subcondylar/condylar regions. Panoramic radiography is adequate for detection of mandibular fractures. However, additional multidetector CT is recommended to ascertain some indecisive fractures of symphysis and condyle, and in complicated fractures.

Diagnostic ability of panoramic radiography for mandibular fractures

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Hyun; Jung, Yun Hoa; Cho Bong Hae; Hwang, Dae Seok [School of Dentistry, Pusan National University, Pusan (Korea, Republic of)

2010-03-15

The purpose of this study was to evaluate the diagnostic efficacy of panoramic radiographs for detection of mandibular fractures. The sample was comprised of 65 patients (55 fractured, 10 non-fractured) with 92 fracture sites confirmed by multi-detector computed tomography (CT). Panoramic radiographs were evaluated for mandibular fractures by six examiners; two oral and maxillofacial radiologists (observer A and B), two oral and maxillofacial surgeons (observer C and D), and two general dentists (observer E and F). Sensitivity of panoramic radiography for mandibular fractures was 95.7% in observer A and B, 93.5% in observer C and D and 80.4% in observer E and F. The lowest sensitivity was shown in symphyseal/parasymphyseal areas, followed by subcondylar/condylar regions. Panoramic radiography is adequate for detection of mandibular fractures. However, additional multidetector CT is recommended to ascertain some indecisive fractures of symphysis and condyle, and in complicated fractures.

Autotransplantation of Mandibular Third Molar: A Case Report

Directory of Open Access Journals (Sweden)

Pabbati Ravi kumar

2012-01-01

Full Text Available Autogenous transplantation is a feasible, fast, and economical option for the treatment of nonsalvageable teeth when a suitable donor tooth is available. This paper presents successful autotransplantation of a mature mandibular left third molar (38 without anatomical variances is used to replace a mandibular left second molar (37. The mandibular second molar was nonrestorable due to extensive root caries and resorption of distal root. After extraction of mandibular second and third molars, root canal therapy was done for the third molar extraorally, and the tooth was reimplanted into the extracted socket of second molar site. After one year, clinical and radiographic examination revealed satisfactory outcome with no signs or symptoms suggestive of pathology. In selected cases, autogenous tooth transplantation, even after complete root formation of the donor tooth, may be considered as a practical treatment alternative to conventional prosthetic rehabilitation or implant treatment.

Patient Preferences for Device-Aided Treatments Indicated for Advanced Parkinson Disease.

Science.gov (United States)

Marshall, Thomas; Pugh, Amy; Fairchild, Angelyn; Hass, Steven

2017-12-01

Effective treatment for advanced Parkinson disease (PD) uncontrolled with oral medication includes device-aided therapies such as deep brain stimulation (DBS) and continuous levodopa-carbidopa infusion to the duodenum via a portable pump. Our objective was to quantify patient preferences for attributes of these device-aided treatments. We administered a Web-enabled survey to 401 patients in the United States. A discrete-choice experiment (DCE) was used to evaluate patients' willingness to accept tradeoffs among efficacy, tolerability, and convenience of alternative treatments. DCE data were analyzed using random-parameters logit. Best-worst scaling (BWS) was used to elicit the relative importance of device-specific attributes. Conditional logit was used to analyze the BWS data. We tested for differences in preferences among subgroups of patients. Improving ability to think clearly was twice as important as a 6-hour-per-day improvement in control of movement symptoms. After controlling for efficacy, treatment delivered via portable infusion pump was preferred over DBS, and both devices were preferred to oral therapy with poor symptom control. Patients were most concerned about device attributes relating to risk of stroke, difficulty thinking, and neurosurgery. Avoiding surgery to insert a wire in the brain was more important than avoiding surgery to insert a tube into the small intestine. Some differences in preferences among subgroups were statistically, but not qualitatively, significant. This study clarifies the patient perspective in therapeutic choices for advanced PD. These findings may help improve communication between patients and providers and also provide evidence on patient preferences to inform regulatory and access decisions. Copyright © 2017. Published by Elsevier Inc.

Eosinophilic granuloma of the mandibular condyle

International Nuclear Information System (INIS)

Huh, Kyung Hoe; Yi, Won Jin; Oh, Sung Won; Lee, Sam Sun; Choi, Mun Kyung

2008-01-01

The present study reports a case of eosinophilic granuloma of the mandibular condyle. Eosinophilic granulomas on the mandibular condyle are very rare, but there are several common clinical and radiographic presentations. The clinical presentations involve swelling on preauricular area, limitation of opening, TMJ pain, etc. The radiographic presentations involve radiolucent lytic condylar lesion with or without pathologic fracture. Sometimes new bone formations are observed. The purpose of the article is to add new cases to the literatures.

Eosinophilic granuloma of the mandibular condyle

Energy Technology Data Exchange (ETDEWEB)

Huh, Kyung Hoe; Yi, Won Jin; Oh, Sung Won; Lee, Sam Sun [Department of Oral and Maxillofacial Radiology, and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of); Choi, Mun Kyung [Department of Oral and Maxillofacial Surgery, College of Medicine, Inje University Sanggye Paik Hospital, Seoul (Korea, Republic of)

2008-03-15

The present study reports a case of eosinophilic granuloma of the mandibular condyle. Eosinophilic granulomas on the mandibular condyle are very rare, but there are several common clinical and radiographic presentations. The clinical presentations involve swelling on preauricular area, limitation of opening, TMJ pain, etc. The radiographic presentations involve radiolucent lytic condylar lesion with or without pathologic fracture. Sometimes new bone formations are observed. The purpose of the article is to add new cases to the literatures.

Innovating transformative medical devices and growing the local medical device manufacturing sector

CSIR Research Space (South Africa)

Bunn, Tony

2017-01-01

Full Text Available . The 4IR is marked by emerging technology breakthroughs in a number of fields, including robotics, genomics, biosensors and wearables, AI, the internet of things, quantum computing, big data predictive analytics, 3D printing/additive manufacturing... of personalized prosthetics and products • Personalized devices and technologies for precision medicine Secure Airway Clamp for safer Anaesthesia MANDIBULAR IMPLANTS PATIENT 2 PATIENT 1 PATIENT 3 PATIENT CT SCAN 3D PRINTED TITANIUM IMPLANT PROPOSED...

Mandibular fracture cases in Pelotas, Rio Grande do Sul, Brazil

Directory of Open Access Journals (Sweden)

Rafael Silva da Silva

2009-10-01

Full Text Available Objectives: To analyze the data in the literature, which show a high incidence of mandibular fractures. The aim of this research was to elucidate the context in which these fractures occur among patients attended at the first aid center of “Pronto Socorro Municipal de Pelotas”, Rio Grande do Sul, Brazil. Methods: From the records referring to the period of June, 2001 to August, 2007, there were 1 345 patients with facial fractures. Of this total, 116 patients with mandibular fracture were selected for this study and the items analysed were: age, gender, mandibular fracture site, etiology and period of the year. Results: It was found that 86.2% of the sample were men. The most prevalent age was 20 to 29 years old representing 36.2%, and the most affected mandibular sites were the body, with 29 cases (25%, and the condyle, with 26 cases (22.4%. The most common cause of fractures was the physical aggression representing 37.1%. The period of the year with the highest incidence of mandibular fractures was the summer, with 38 cases (32.8%. Conclusion: It was therefore observed that the patients with mandibular fracture assisted at Pronto-Socorro Municipal de Pelotas, Rio Grande do Sul, Brazil, were generally men, 20 to 29 years old with mandibular body fracture and they were victims of physical aggression.

Early Loaded Single Implant Reinforced Mandibular Overdenture

Directory of Open Access Journals (Sweden)

K. Nischal

2016-01-01

Full Text Available Rehabilitating atrophied mandible with two-implant supported denture is a common treatment modality for implant retained removable overdenture in mandible. This paper aims to design a treatment modality where single implant reinforced overdenture is fabricated for a severely atrophied mandibular ridge with early loading protocol. Results of studies have shown that a single implant mandibular overdenture significantly increases the satisfaction and quality of life of patients with edentulism. Midline fracture of the prosthesis is the most common complication related to single implant and two-implant retained mandibular overdentures. To manage such complication, a thin metal mesh is used to reinforce the overdenture and also to make the prostheses lighter and cost effective as compared to conventional cast metal framework.

Intraoperative monitoring of marginal mandibular nerve during neck dissection.

Science.gov (United States)

Tirelli, Giancarlo; Bergamini, Pier Riccardo; Scardoni, Alessandro; Gatto, Annalisa; Boscolo Nata, Francesca; Marcuzzo, Alberto Vito

2018-05-01

The purpose of this study was to assess the efficacy of intraoperative nerve integrity monitoring (NIM) to prevent marginal mandibular nerve injuries during neck dissection. This prospective study compared 36 patients undergoing NIM-assisted neck dissection from July 2014 to March 2015 to a cohort of 35 patients subjected to neck dissection over an identical period of time before the technique was introduced. We also assessed possible correlations between marginal mandibular nerve injuries and other factors, such as anthropometric measurements, presence of clinical neck metastases, type of neck dissection, and site of primary tumor. The incidence of marginal mandibular nerve paralyses was significantly lower among the group of patients undergoing NIM-assisted neck dissection (P = .021). There was no significant difference in the duration of the procedure, and the technique resulted in a limited increase of cost. No other factor seemed to influence the onset of marginal mandibular nerve palsy. In our opinion, NIM is a valuable aid for preventing marginal mandibular nerve injuries during neck dissection. © 2018 Wiley Periodicals, Inc.

Radiographic Localization of the Mental Foramen and Mandibular Canal

Directory of Open Access Journals (Sweden)

Farzaneh Afkhami

2013-01-01

Full Text Available Objective: Accurately localizing the mental foramen and mandibular canal is important when administering local anesthesia and performing surgery; therefore, knowing the normal range of the possible locations is essential. Our purpose was to assess the location of the mental foramen and mandibular canal in an Iranian population using panoramic radiography.Materials and Methods: Standard panoramic radiographies were performed. The positions of 100 mental foramens were evaluated. The distances from the center of the mental foramen to the superior and inferior borders of the mandible and to the apexes of the first and second premolar were measured. The distance of the mental foramens from the mandibular midline and the diameter of the mandibular canal in the mental foramen connection were also measured.Results: Among 100 mental foramens, 6% were positioned under the first premolar, 24% were between the first and second premolars, 67% were under the second premolar, and the remaining 3% were behind the second premolar. The mean distance from the mental foramen to the mandibular midline was 27.77±3.20 mm. The mean diameter of the mandibular canal in the mental foramen connection was 3.09±0.69mm.Conclusion: The mental foramen was near the second premolar and the inferior border of the mandible. This information can be used to perform safer mental nerve blocks in surgical interventions.

Penetration of flomoxef into human maxillary and mandibular bones.

Science.gov (United States)

Igawa, H H; Sugihara, T; Yoshida, T; Kawashima, K; Ohura, T

1995-09-01

Penetration of flomoxef into the maxillary and mandibular bones was assayed clinically to provide data about its usefulness for the prevention of postoperative infection after maxillofacial surgery. Twenty-one patients undergoing maxillofacial surgery at our department were given flomoxef 2 g dissolved in 20 ml of physiological saline intravenously over 3 minutes during operation, and the serum, maxillary and mandibular concentrations were measured 1, 3, and 6 hours after injection by the band culture method using Escherichia coli 7437 as the indicator strain. The mean concentrations were 53.4, 16.1, and 2.6 micrograms/ml, respectively, in the serum, 17.6, 7.8, and 1.0 micrograms/g in maxillary bone, and 16.4, 4.2, and 0.9 micrograms/g in mandibular bone. The mean bone:serum ratios at 1, 3, and 6 hours were 33.0%, 48.2%, and 36.8%, respectively, for maxillary bone, and 30.7%, 26.2%, and 35.7% for mandibular bone. When compared with previously reported data on the bone:serum ratios in jaw of various other intravenous antibiotics, our results show that penetration of flomoxef into maxillary and mandibular bone is extremely high. As all the intramaxillary and intramandibular concentrations exceed its MIC80 values against clinical isolates of bacteria frequently isolated in cases of infection in the oral and maxillofacial region, it is apparent that one intravenous shot of flomoxef 2 g allows penetration of the drug into the maxillary and mandibular bones at effective concentrations. Flomoxef is therefore potentially useful for the prevention and treatment of infections in the oral and maxillofacial region, as it has excellent penetration into the maxillary and mandibular bones.

Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

Directory of Open Access Journals (Sweden)

Seyed Mohammadreza Safavi

2013-01-01

Full Text Available In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen due to collision with adjacent roots. This article showcases mandibular molar distalization utilizing miniscrews, inserted at the retromolar area to correct a Class-III problem. A 24-year-old girl with a mild skeletal Class-III malocclusion and dental Class-III molar and canine relationship bilaterally was referred for orthodontic treatment. The treatment plan included distalization of the lower molars bilaterally followed by full fixed appliance therapy, after third molar extractions. For the lower molar distalization, the miniscrews were inserted at the retromolar pad. At the end of 21 months, a Class-I molar and canine relationship, normal overjet and overbite were obtained. The average amount of distalization of mandibular first molar was 3.2 mm at the crown level. In conclusion, placing miniscrews at the retromolar pad area for lower molar distalization was found to be a simple and effective method for correcting anterior cross bite and mandibular anterior crowding or protrusion, without the need for patient compliance.

Recent advances in medical device triage technologies for chemical, biological, radiological, and nuclear events.

Science.gov (United States)

Lansdowne, Krystal; Scully, Christopher G; Galeotti, Loriano; Schwartz, Suzanne; Marcozzi, David; Strauss, David G

2015-06-01

In 2010, the US Food and Drug Administration (Silver Spring, Maryland USA) created the Medical Countermeasures Initiative with the mission of development and promoting medical countermeasures that would be needed to protect the nation from identified, high-priority chemical, biological, radiological, or nuclear (CBRN) threats and emerging infectious diseases. The aim of this review was to promote regulatory science research of medical devices and to analyze how the devices can be employed in different CBRN scenarios. Triage in CBRN scenarios presents unique challenges for first responders because the effects of CBRN agents and the clinical presentations of casualties at each triage stage can vary. The uniqueness of a CBRN event can render standard patient monitoring medical device and conventional triage algorithms ineffective. Despite the challenges, there have been recent advances in CBRN triage technology that include: novel technologies; mobile medical applications ("medical apps") for CBRN disasters; electronic triage tags, such as eTriage; diagnostic field devices, such as the Joint Biological Agent Identification System; and decision support systems, such as the Chemical Hazards Emergency Medical Management Intelligent Syndromes Tool (CHEMM-IST). Further research and medical device validation can help to advance prehospital triage technology for CBRN events.

Intermaxillary Fixation Screw Morbidity in Treatment of Mandibular Fractures

DEFF Research Database (Denmark)

Florescu, Vlad-Andrei; Kofod, Thomas; Pinholt, Else Marie

2016-01-01

Purpose The aim of the present retrospective study was to investigate the morbidity of screws used for intermaxillary fixation (IMF) in the treatment of mandibular fractures. A review of the published data was also performed for a comparison of outcomes. Our hypothesis was that the use of screws...... for IMF of mandibular fractures would result in minimal morbidity. Materials and Methods Patients treated for mandibular fractures from 2007 to 2013, using screws for IMF, using the international diagnosis code for mandibular fracture, DS026, were anonymously selected (Department of Oral and Maxillofacial...... Surgery, Rigshospitalet, University Hospital of Copenhagen, Copenhagen, Denmark). The fracture type, radiographic findings, treatment modality, screw type and number, and root damage were recorded. For the outcome comparison, a review of the published data regarding iatrogenic dental root damage caused...

[A toddler with a mandibular fracture].

Science.gov (United States)

van der Linden, E L; Bun, R J; van Os, E

2017-01-01

Mandibular fractures are rare in children. Symptoms of these fractures include preauricular pain and swelling, trismus and pain when opening the mouth, and they are often preceded by a fall on the chin. If the diagnosis is missed they may have serious consequences for the growth and development of the jaw. A 3-year-old boy was referred with a swelling in his left cheek, fever and vomiting. Two days earlier he had fallen on his chin. At physical examination he had severe preauricular pain on palpation and a trismus. The patient was admitted because of suspicion of a viral parotitis and the threat of dehydration. After discharge, he went to the dentist for examination of a molar that was painful to the touch. The dentist performed an orthopantomogram and discovered a fracture of the left mandibular collum. Any child with trauma to the chin should be observed for symptoms of a mandibular fracture, and if it seems necessary non-invasive radiographic examination should be performed.

RETRACTED: Advances in colloidal quantum dot solar cells: The depleted-heterojunction device

KAUST Repository

Kramer, Illan J.; Pattantyus-Abraham, Andras G.; Barkhouse, Aaron R.; Wang, Xihua; Konstantatos, Gerasimos; Debnath, Ratan; Levina, Larissa; Raabe, Ines; Nazeeruddin, Md. K.; Grä tzel, Michael; Sargent, Edward H.

2011-01-01

Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processibility with quantum size-effect tunability to match absorption with the solar spectrum. Recent advances in CQD photovoltaics have led to 3.6% AM1.5 solar power conversion efficiencies. Here we report CQD photovoltaic devices on transparent conductive oxides and show that our devices rely on the establishment of a depletion region for field-driven charge transport and separation. The resultant depleted-heterojunction solar cells provide a 5.1% AM1.5 power conversion efficiency. The devices employ infrared-bandgap size-effect-tuned PbS colloidal quantum dots, enabling broadband harvesting of the solar spectrum. © 2010 Elsevier B.V.

RETRACTED: Advances in colloidal quantum dot solar cells: The depleted-heterojunction device

KAUST Repository

Kramer, Illan J.

2011-08-01

Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processibility with quantum size-effect tunability to match absorption with the solar spectrum. Recent advances in CQD photovoltaics have led to 3.6% AM1.5 solar power conversion efficiencies. Here we report CQD photovoltaic devices on transparent conductive oxides and show that our devices rely on the establishment of a depletion region for field-driven charge transport and separation. The resultant depleted-heterojunction solar cells provide a 5.1% AM1.5 power conversion efficiency. The devices employ infrared-bandgap size-effect-tuned PbS colloidal quantum dots, enabling broadband harvesting of the solar spectrum. © 2010 Elsevier B.V.

Trigeminocardiac reflex by mandibular extension on rat pial microcirculation: role of nitric oxide.

Directory of Open Access Journals (Sweden)

Dominga Lapi

Full Text Available In the present study we have extended our previous findings about the effects of 10 minutes of passive mandibular extension in anesthetized Wistar rats. By prolonging the observation time to 3 hours, we showed that 10 minutes mandibular extension caused a significant reduction of the mean arterial blood pressure and heart rate respect to baseline values, which persisted up to 160 minutes after mandibular extension. These effects were accompanied by a characteristic biphasic response of pial arterioles: during mandibular extension, pial arterioles constricted and after mandibular extension dilated for the whole observation period. Interestingly, the administration of the opioid receptor antagonist naloxone abolished the vasoconstriction observed during mandibular extension, while the administration of Nω-Nitro-L-arginine methyl ester, a nitric oxide synthase inhibitor, abolished the vasodilation observed after mandibular extension. Either drug did not affect the reduction of mean arterial blood pressure and heart rate induced by mandibular extension. By qRT-PCR, we also showed that neuronal nitric oxide synthase gene expression was significantly increased compared with baseline conditions during and after mandibular extension and endothelial nitric oxide synthase gene expression markedly increased at 2 hours after mandibular extension. Finally, western blotting detected a significant increase in neuronal and endothelial nitric oxide synthase protein expression. In conclusion mandibular extension caused complex effects on pial microcirculation involving opioid receptor activation and nitric oxide release by both neurons and endothelial vascular cells at different times.

Mandibular fossa morphology during therapy with a fixed functional orthodontic appliance : A magnetic resonance imaging study.

Science.gov (United States)

Kinzinger, Gero Stefan Michael; Hourfar, Jan; Kober, Cornelia; Lisson, Jörg Alexander

2018-03-01

During therapy of distoclusion entailing a rigid, fixed orthodontic appliance, the mandibular fossa and condyle are ideally remodeled, while dentoalveolar effects occur through adaptive mechanisms. Adaptive processes, especially in the fossa region, have not been adequately investigated. Our magnetic resonance imaging (MRI) investigation aimed to assess the effects of therapy with a functional mandibular advancer (FMA) on mandibular fossa morphology. We monitored via MRI the therapeutic course of 25 patients at three time points. Visual findings and metric assessments were carried out in the sagittal plane. Three-dimensional (3D) reconstructions of the joint structure of two exemplary patients were also made. Visual examinations of the MRI slices at the three time points revealed no changes in fossa shape in any of the 50 temporomandibular joints. Lateral comparisons showed that the morphology of the fossae of all 25 patients was identical. Metric analysis demonstrated no significant alterations in width, depth, or in their ratio, not even laterally. Nine measurements of the distances between the porion, mandibular fossa, and articular eminence revealed no significant changes in total or on the left and right sides, or intralaterally. The visual findings and metric analyses of parasagittal MRI slices did not indicate any morphological changes in the mandibular fossa or articular eminence in patients with distoclusion treated via a rigid, fixed orthodontic appliance. However, special reworking of the MRI data facilitated reconstruction of the surfaces of joint structures in 3D. This new method makes it possible to depict more accurately and noninvasively the adaptive mechanisms not ascertainable via metric methods and to assess them as 3D structures.

Coronal views of the paediatric mandibular condyle on ...

African Journals Online (AJOL)

This article highlights the importance of routinely reviewing the mandibular condyle on computerised tomography brain studies in a trauma setting, that often extends to involve the mandibular condyles in the scan parameters. We discuss 4 cases seen over the last 18 months at our institution, and review the relevant ...

Osteochondroma of the mandibular condyle

Directory of Open Access Journals (Sweden)

Ashish Kumar

2011-01-01

Full Text Available Osteochondroma (OC of the mandibular condyle is a relatively rare condition that causes a progressive enlargement of the condyle, usually resulting in facial asymmetry, temporomandibular joint (TMJ dysfunction, and malocclusion. Radiographically, there is a unilaterally enlarged condyle usually with an exophytic outgrowth of the tumor from the condylar head. We present a case of a left mandibular condylar OC that created a major facial asymmetry, malocclusion, and TMJ dysfunction. Discussion includes the rationale for treatment and the method used in this case. In actively growing OCs, surgical intervention is indicated to remove the tumor stopping the benign growth process and improve facial symmetry, occlusion, and jaw function.

Autotransplantation of Mandibular Third Molar with Buccal Cortical Plate to Replace Vertically Fractured Mandibular Second Molar: A Novel Technique.

Science.gov (United States)

Zufía, Juan; Abella, Francesc; Trebol, Ivan; Gómez-Meda, Ramón

2017-09-01

Tooth replacement often leads to inadequate vertical volume in the recipient site bone when a tooth has been extracted because of a vertical root fracture (VRF). This case report presents the autotransplantation of a mandibular third molar (tooth #32) with the attached buccal cortical plate to replace a mandibular second molar (tooth #31) diagnosed with a VRF. After extraction of tooth #31, the recipient socket was prepared based on the size measured in advance with cone-beam computed tomographic imaging. The precise and calculated osteotomy of the cortical bone of tooth #32 allowed for the exact placement of the donor tooth in the position of tooth #31. The total extraoral time was only 25 minutes. The block was fixed to the recipient socket with an osteosynthesis screw and splinted with a double resin wire for 8 weeks. At the 6-month follow-up, the screw was removed, and the stability of the tooth and the regeneration obtained throughout the vestibular area were confirmed. At the 2-year follow-up, the transplanted tooth was asymptomatic and maintained a normal bone level. Advantages of autotransplantation over dental implants include maintenance of proprioception, possible orthodontic movements, and a relatively low cost. This case report demonstrates that an autotransplantation of a third molar attached to its buccal cortical plate is a viable option to replace teeth with a VRF. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic Extraction of High-Risk Impacted Mandibular Third Molars in Close Proximity to the Mandibular Canal: A Systematic Review.

Science.gov (United States)

Kalantar Motamedi, Mahmood Reza; Heidarpour, Majid; Siadat, Sara; Kalantar Motamedi, Alimohammad; Bahreman, Ali Akbar

2015-09-01

Extraction of mandibular third molars (M3s) in close proximity to the mandibular canal has some inherent risks to adjacent structures, such as neurologic damage to teeth, bone defects distal to the mandibular second molar (M2), or pathologic fractures in association with enlarged dentigerous cysts. The procedure for extrusion and subsequent extraction of high-risk M3s is called orthodontic extraction. This is a systematic review of the available approaches for orthodontic extraction of impacted mandibular M3s in close proximity to the mandibular canal and their outcomes. The PubMed, Scopus, Cochrane Central Register of Controlled Trials (CENTRAL), DOAJ, Google Scholar, OpenGrey, Iranian Science Information Database (SID), Iranmedex, and Irandoc databases were searched using specific keywords up to June 2, 2014. Studies were evaluated based on predetermined eligibility criteria, treatment approaches, and their outcomes. Thirteen articles met the inclusion criteria. A total of 123 impacted teeth were extracted by orthodontic extraction and 2 cases were complicated by transient paresthesia. Three types of biomechanical approaches were used: 1) using the posterior maxillary region as the anchor for orthodontic extrusion of lower M3s, 2) simple cantilever springs attached to the M3 buttonhole, and 3) cantilever springs tied to a bonded orthodontic bracket on the M3 plus multiple-loop spring wire for distal movement of the M3. Osteo-periodontal status of M2s also improved uneventfully. Despite the drawbacks of orthodontic extraction, removal of deeply impacted M3s using the described techniques is safe with regard to mandibular nerve injury and neurologic damage. Orthodontic extraction is recommended for extraction of impacted M3s that present a high risk of postoperative osteo-periodontal defects on the distal surface of the adjacent M2 and those associated with dentigerous cysts. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by

Experimental occlusal interferences. Part V. Mandibular rotations versus hemimandibular translations.

Science.gov (United States)

Christensen, L V; Rassouli, N M

1995-12-01

Frontal plane mandibular rotations and corresponding hemimandibular translations were studied in vitro by using direct observations of a human cadaver mandible and in vivo by using the indirect observations of rotational electrognathography. A comparison between the two methods showed that rotational electrognathography erred in measuring the clinically relevant hemimandibular translations resulting from mandibular rotations having a unilateral molar point (simulated occlusal interference) as the pivot of frontal plane torque. In vitro frontal plane rotations about a unilateral mandibular molar tooth (simulated occlusal interference) suggested that the resulting hemimandibular upward translations of the lateral portion of the mandibular condyle, contralateral to the molar tooth, would cause considerable compressive loading of the temporomandibular joint disc.

Predicting pathology in impacted mandibular third molars

Directory of Open Access Journals (Sweden)

Aveek Mukherji

2017-01-01

Full Text Available Introduction: The rising incidence of the impacted mandibular third molars and their association with pathologies is now considered a public health problem. Aims and Objectives: The objective of this study was to assess the position of impacted mandibular third molars that are prone to developing pathologies and to determine the frequency and type of pathological conditions associated with these impacted teeth to facilitate planning for their prophylactic removal. Materials and Methods: Consecutive panoramic radiographs and clinical examination of 300 patients with impacted mandibular third molars were collected. They were segregated according to Pell and Gregory’s classification, Winter’s classification, and according to their state of eruption. These were correlated with associated pathologies based on clinical and radiological criteria. Statistical Analysis Used: Descriptive statistics included computation of percentages, mean, and standard deviations. The statistical test applied for the analysis was Pearson’s Chi-square test (χ2. For this test, confidence interval and P value were set at 93% and ≤0.03, respectively. Results: The pathology most commonly associated with impacted third molars was pericoronitis, which had the highest frequency of occurrence in partially erupted, distoangular, and IA positioned (as per Pell and Gregory classification impacted teeth. Impacted mandibular third molars, which were in IA position, placed mesially, and partially erupted, were prone to develop pathologies such as dental caries and periodontitis. Conclusion: The clinical and radiographical features of impacted third molar may be correlated to the development of their pathological complications. The partially impacted mandibular third molars with mesioangularly aligned in IA position have the highest potential to cause pathological complications.

Pediatric mandibular fractures: a free hand technique.

Science.gov (United States)

Davison, S P; Clifton, M S; Davison, M N; Hedrick, M; Sotereanos, G

2001-01-01

The treatment of pediatric mandibular fractures is rare, controversial, and complicated by mixed dentition. To determine if open mandibular fracture repair with intraoral and extraoral rigid plate placement, after free hand occlusal and bone reduction, without intermaxillary fixation (IMF), is appropriate and to discuss postoperative advantages, namely, maximal early return of function and minimal oral hygiene issues. A group of 29 pediatric patients with a mandibular fracture were examined. Twenty pediatric patients (13 males and 7 females) with a mean age of 9 years (age range, 1-17 years) were treated using IMF. All patients were treated by the same surgeon (G.S.). Surgical time for plating was reduced by 1 hour, the average time to place patients in IMF. The patients who underwent open reduction internal fixation without IMF ate a soft mechanical diet by postoperative day 3 compared with postoperative day 16 for those who underwent IMF. Complication rates related to fixation technique were comparable at 20% for those who did not undergo IMF and 33% for those who did. We believe that free hand reduction is a valuable technique to reduce operative time for pediatric mandibular fractures. It maximizes return to function while minimizing the oral hygiene issues and hardware removal of intermaxillary function.

Forced extrusion for removal of impacted third molars close to the mandibular canal Extrusión forzada para extraer los terceros molares impactados cerca del canal mandibular

Directory of Open Access Journals (Sweden)

Dennis Flanagan DDS

2012-03-01

Full Text Available Impacted mandibular third molars can be located in close proximity to the mandibular canal. This creates a risk for the nerve or artery injury. These are contained in the canal. However, the impacted third molar can be moved coronally by orthodontic means, after removal of overlying bone, and safely extracted. The orthodontic intervention slowly moves the tooth apex away from the mandibular canal and reduces the potential for a neural injury. This method may be useful for older patients with root apices that approximate or are actually located in the mandibular canal. This technique needs further study. There is a theoretical potential for neural or arterial injury from physical contact of the tooth apex as it moves by or through the mandibular canal.Los terceros molares inferiores impactados pueden localizarse muy cerca del canal mandibular. Esto constituye un riesgo de lesión del nervio o la arteria, que se localizan dentro del canal. No obstante, el tercer molar impactado puede desplazarse en dirección coronal con ortodoncia, tras ostectomía del hueso suprayacente, y extraerse sin riesgos. La intervención ortodóncica desplaza lentamente el ápice del diente fuera del canal mandibular y reduce la posibilidad de lesión neural. Este método puede ser útil para pacientes de edad avanzada con ápices dentales que se aproximan o en realidad se localizan en el canal mandibular. La técnica necesita un estudio adicional. Hay la posibilidad teórica de lesión neural o arterial a partir del contacto físico del ápice del diente a medida que se desplaza a través del canal mandibular.

Radiographic evaluation of the course and visibility of the mandibular canal

International Nuclear Information System (INIS)

Jung, Yun Hoa; Cho, Bong Hae

2014-01-01

This study was performed to investigate the course of the mandibular canal on panoramic radiography and the visibility of this canal on both panoramic radiography and cone-beam computed tomography (CBCT). The study consisted of panoramic radiographs and CBCT images from 262 patients. The course of the mandibular canal, as seen in panoramic radiographs, was classified into four types: linear, elliptical, spoon-shaped, and turning curves. The visibility of this canal from the first to the third molar region was evaluated by visually determining whether the mandibular canal was clearly visible, probably visible, or invisible. The visibility of the canal on panoramic radiographs was compared with that on CBCT images. Elliptical curves were most frequently observed along the course of the mandibular canal. The percentage of clearly visible mandibular canals was the highest among the spoon-shaped curves and the lowest among the linear curves. On panoramic radiographs, invisible mandibular canals were found in 22.7% of the examined sites in the first molar region, 11.8% in the second molar region, and 1.3% in the third molar region. On CBCT cross-sectional images, the mandibular canal was invisible in 8.2% of the examined sites in the first molar region, 5.7% in the second molar region, and 0.2% in the third molar region. The visibility of this canal was lower in the first molar region than in the third molar region. The mandibular canal presented better visibility on CBCT images than on panoramic radiographs.

Buccal infiltration versus inferior alveolar nerve block in mandibular 2nd premolars with irreversible pulpitis.

Science.gov (United States)

Yilmaz, K; Tunga, U; Ozyurek, T

2018-04-01

The purpose of this study is to compare the success rates of inferior alveolar nerve block (IANB) and buccal infiltration anesthesia of mandibular second premolar with irreversible pulpitis and to evaluate the level of patient discomfort with these methods. Forty patients, who had irreversible pulpitis in the mandibular 2 nd premolar teeth, were included in the study. Patients were randomly distributed in two groups. In one group IANB, in the other group buccal infiltration anesthesia were performed. The efficacy of these two different anesthesia techniques on the related teeth was investigated with the Heft-Parker visual analog scale. In addition, with a pulse oximetry device, the changes in the patients' heart rates were compared between the groups. The obtained data were evaluated statistically. Both anesthesia techniques reduced the pain significantly in patients before the administration (P 0.05). Both of the anesthesia techniques increased the heart rate (P < 0.05). The increase in the heart rate of the patients was significantly higher in the buccal infiltration anesthesia group than the other anesthesia group (P < 0.05). Within the limitation of this in vivo study, there was no difference between the efficacies of the buccal infiltration anesthesia and IANB anesthesia in the mandibular 2 nd premolar teeth with irreversible pulpitis. Buccal infiltration anesthesia caused more discomfort in the patients compared with the IANB during the administration.

Mandibular ramus fractures: a rarity.

Science.gov (United States)

Kale, Tejraj Pundalik; Kotrashetti, S M; Louis, Archana; Lingaraj, J B; Sarvesh, B U

2013-01-01

To determine the incidence of mandibular ramus fractures in KLE's PK Hospital and to analyze the outcome of open reduction and internal fixation of these fractures. Using a retrospective study design, records of all trauma patients who reported to the Department of Oral and Maxillofacial Surgery, KLE's PK Hospital Belgaum, between the years January 2006 to October 2011 was obtained from the medical records office. The data variables that were analyzed were the name, age, sex, cause of injury, pretreatment occlusion, treatment given, period of MMF and post-treatment occlusion. Total number of mandibular fracture cases was 298. Ramus fractures were 10 in number which accounted for 3.3% of fractures. The age range of these 10 patients was seen to be between 20 to 80 years with the average age being 35.6 years. Of these 10 patients, 9 were male and 1 was female and 7 patients were treated by open reduction and internal fixation and the remaining 3 by closed reduction. The average period of MMF was 3 days for the patients who underwent open reduction and internal fixation. There was improvement in occlusion in all 10 patients post-treatment and there was no complication reported in any of the cases. Ramus fractures accounted for 3.3% of all mandibular fractures. Open reduction and internal fixation of ramus fractures ensures adequate functional and anatomic reduction. This study makes an attempt to throw a light on the increasing incidence of ramus fractures and a successful management of these fractures by open reduction and internal fixation. How to cite this article: Kale TP, Kotrashetti SM, Louis A, Lingaraj JB, Sarvesh BU. Mandibular Ramus Fractures: A Rarity. J Contemp Dent Pract 2013;14(1):39-42. Source of support: Nil Conflict of interest: None declared.

Evaluation of advanced cooling therapy's esophageal cooling device for core temperature control.

Science.gov (United States)

Naiman, Melissa; Shanley, Patrick; Garrett, Frank; Kulstad, Erik

2016-05-01

Managing core temperature is critical to patient outcomes in a wide range of clinical scenarios. Previous devices designed to perform temperature management required a trade-off between invasiveness and temperature modulation efficiency. The Esophageal Cooling Device, made by Advanced Cooling Therapy (Chicago, IL), was developed to optimize warming and cooling efficiency through an easy and low risk procedure that leverages heat transfer through convection and conduction. Clinical data from cardiac arrest, fever, and critical burn patients indicate that the Esophageal Cooling Device performs very well both in terms of temperature modulation (cooling rates of approximately 1.3°C/hour, warming of up to 0.5°C/hour) and maintaining temperature stability (variation around goal temperature ± 0.3°C). Physicians have reported that device performance is comparable to the performance of intravascular temperature management techniques and superior to the performance of surface devices, while avoiding the downsides associated with both.

The pharmacotherapy of the HeartMate II, a continuous flow left ventricular assist device, in patients with advanced heart failure: integration of disease, device, and drug.

Science.gov (United States)

Jennings, Douglas L; Chambers, Rachel M; Schillig, Jessica M

2010-10-01

Advanced heart failure continues to be a significant cause of morbidity and mortality in the US. Patients with advanced heart failure have a poor prognosis without cardiac transplantation. The use of left ventricular assist devices (LVADs) as destination therapy for these patients is therefore expected to increase in the coming years as technology advances. The HeartMate II, a continuous flow implantable device, is currently the only LVAD that has been approved by the Food and Drug Administration for destination therapy in patients with advanced heart failure. The pharmacotherapy associated with this device is very complex and, therefore, the need for expertly trained clinical pharmacists to care for this expanding patient population will also likely increase. Unfortunately, most pharmacists are unfamiliar with the effect of LVADs on the physiology and pharmacotherapy of a patient's heart failure. The purpose of this article is to give clinical pharmacists an introduction to the most common pharmacotherapeutic issues for patients with LVADs and present practical solutions for managing common drug therapy problems.

Cerebro-costo-mandibular syndrome: Report of two cases.

Science.gov (United States)

Abdalla, Wael; Panigrahy, Ashok; Bartoletti, Stefano C

2011-01-01

Cerebro-costo-mandibular syndrome (CCMS) is a rare syndrome that includes a constellation of mandibular hypoplasia and posterior rib defects as its basic features. Additional features can include hearing loss, tracheal cartilage abnormalities, scoliosis, elbow hypoplasia, and spina bifida. Here we report two cases of CCMS and discuss the reported long-term outcome of the disease.

Toward Patient Specific Long Lasting Metallic Implants for Mandibular Segmental Defects

Science.gov (United States)

Shayesteh Moghaddam, Narges

current standard of care consists of the use of Surgical Grade 5 titanium also known as Ti-6Al-4V hardware and either a single or double fibula barrel vascularized bone graft. We expanded our model to simulate the effects of this surgery. The expanded model includes both single and double barrel fibular bone graft repair of a right M1-M3 containing section of the mandible, Ti-6Al-4V fixation hardware and screws. We found that the stiffness mismatch between the fixation hardware and the bone causes stress shielding on the host mandible and the bone graft, and stress concentration at the fixation hardware and screws. The simulations results show that while a double-barrel graft is preferred, in the long-term it does not create the optimal outcome due to the abnormal stress pattern. To improve the long-term outcome with metallic implants it is essential to recreate the normal stress pattern. To achieve this outcome we investigated the use of porous nitinol as a substitute for the currently used titanium hardware. While NiTi already has a lower stiffness than titanium, it is possible to add porosity to further reduce the stiffness to be closer to that of cortical bone. The ultimate goal is to create fixation hardware that has sufficient stiffness for immobilization while recreating the normal stress pattern in the bone. Using a finite element model of devices fabricated from Surgical Grade 5 titanium and NiTi, we have found that stiffness-tuned NiTi hardware with conventional geometries should result in recreation of normal stress-strain trajectories and better treatment outcome. Finally, to further improve the outcome, we suggest the use of a two-stage mechanism Bone Bandaid which supports both the immobilization/healing and regenerative phases of mandibular segmental defect treatment. This device is made of two materials. The stiff Ti-6Al-4V portion provides the support during the healing period and is disengaged afterwards. The second material is a NiTi wire-frame to

Pearls of mandibular trauma management.

Science.gov (United States)

Koshy, John C; Feldman, Evan M; Chike-Obi, Chuma J; Bullocks, Jamal M

2010-11-01

Mandibular trauma is a common problem seen by plastic surgeons. When fractures occur, they have the ability to affect the patient's occlusion significantly, cause infection, and lead to considerable pain. Interventions to prevent these sequelae require either closed or open forms of reduction and fixation. Physicians determining how to manage these injuries should take into consideration the nature of the injury, background information regarding the patient's health, and the patient's comorbidities. Whereas general principles guide the management of the majority of injuries, special consideration must be paid to the edentulous patient, complex and comminuted fractures, and pediatric patients. These topics are discussed in this article, with a special emphasis on pearls of mandibular trauma management.

Experimental occlusal interferences. Part III. Mandibular rotations induced by a rigid interference.

Science.gov (United States)

Rassouli, N M; Christensen, L V

1995-10-01

A rigid intercuspal interference (minimum mean height of 0.24 mm) was placed on either the right or left mandibular second premolar and first molar of 12 subjects. During brisk and forceful biting on the interference, rotational electrognathography measured maximum torque of the right and left mandibular condyles in the frontal and horizontal planes of orientation. All subjects showed frontal plan upward rotation (mean of 0.7 degrees) of the mandibular condyle contralateral to the interference. In 33% of the subjects there was no horizontal plane backward rotation. In 58% of the subjects there was horizontal plane backward rotation (mean of 0.5 degrees) of the mandibular condyle ipsilateral to the interference, and in one subject (8%) there was backward horizontal plane rotation (0.1 degree) of the mandibular condyle contralateral to the interference. It was inferred that the masseter muscle, ipsilateral to the interference, generated negative work in order to decelerate frontal plane 'unseating' of the mandibular condyle ipsilateral to the interference. It was inferred that the masseter muscle, contralateral to the interference, produced positive work in order to accelerate frontal plane 'seating' of the mandibular condyle contralateral to the interference. Finally, it was speculated that the impact forces of frontal plane 'seating' of the mandibular condyle, contralateral to the interference, might lead to 'vacuum sticking' of the temporomandibular joint disc because of the formation of negative hydrostatic pressures.

Army Instructors’ Use of Mobile Devices in the Infantry Advanced Leaders Course

Science.gov (United States)

2014-08-01

attenuate 3G /4G signal strength. When network access is inhibited, so too is the usefulness of the mobile device. Therefore, if cellular service is...Benning? Do you have 2G , 3G , or 4G connectivity? Do you have the same connectivity at the other installations where MTTs are usually conducted? Are there...Research Report 1975 Army Instructors’ Use of Mobile Devices in the Infantry Advanced Leaders Course Richard L

Mandibular pseudocarcinomatous hyperplasia.

Science.gov (United States)

Warter, A; Walter, P; Meyer, C; Barrière, P; Galatir, L; Wilk, A

2000-08-01

Three unusual cases of pseudocarcinomatous (pseudoepitheliomatous) hyperplasia (PH) affecting chronic osteomyelitic mandibular sequestra are reported to highlight the differences with the various squamous neoplasms which occur in that site. In two patients carrying a mandibular graft following the excision of an ameloblastoma, mucosal ulcers resulted in chronic osteomyelitis. In a third patient, an apical dental infection was associated with fistulated osteomyelitis. Histology of the three sequestra showed an intraosseous squamous proliferation. It was characterized by a peripheral involvement of medullary spaces, the more mature epithelial layer covering the bone trabeculae without intervening stroma, and the basal type epithelial layer surrounding a central fibrovascular core. There were no histological or cytological signs of malignancy. PH shows an inverted pattern when compared with the centro-medullary tumoural islands seen in the various oral or odontogenic squamous neoplasms which occur in the jaws. The lack of signs of malignancy distinguish PH from common squamous cell carcinomas. A short clinical course is an important feature in the distinction of PH from the well differentiated squamous cell carcinomas which may develop in fistulated chronic osteomyelitis.

Photoelastic analysis of bone deformation in the region of the mandibular condyle during mastication.

Science.gov (United States)

Meyer, Christophe; Kahn, Jean-Luc; Boutemi, Philippe; Wilk, Astrid

2002-06-01

The purpose of this experimental study was to demonstrate the stress patterns arising in the region of the mandibular condyle during mastication. Stress analysis was performed using reflection photoelasticity to demonstrate deformation occurring on the surface of the mandible. The rami of three fresh dentate human mandibles were coated with a shell of photoelastic resin. Using a novel loading device, these mandibles were then subjected to external forces (muscular traction, resultant mandibular forces and intra-articular reaction force) reproducing a unilateral biting task between the first right molars. Deformations were measured from the working side. The trace of isostatic lines from the isoclinic fringes revealed major differences in stress distributions between the three mandibles. These differences were attributed to differences in shape between the three mandibles. Conversely, we consistently found compressive stress patterns along the posterior border of the ramus and tensile stress patterns along the anterior border of the ramus and in the zone situated below the siqmoid notch. These findings suggest that during this particular task, the mandible is subjected to sagittal forces which tend to straighten the mandibular angle. This implies that new concepts are needed for the positioning of osteosynthesis plates in the condylar region, close to the tensile strain lines, as has been recommended also for other parts of the mandible when applying semi-rigid internal fixation. Copyright 2002 European Association for Cranio-Maxillofacial Surgery. Published by Elsevier Science Ltd.

Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces

Directory of Open Access Journals (Sweden)

Milena Peixoto Nogueira de Sá

2013-08-01

Full Text Available INTRODUCTION: The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. OBJECTIVE: The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. METHODS: Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C and an experimental group (E which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. RESULTS: The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%, hyaline (46.92% and proliferative (17.70% layers. CONCLUSIONS: Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces.

Science.gov (United States)

de Sá, Milena Peixoto Nogueira; Zanoni, Jacqueline Nelisis; de Salles, Carlos Luiz Fernandes; de Souza, Fabrício Dias; Suga, Uhana Seifert Guimarães; Terada, Raquel Sano Suga

2013-01-01

The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C) and an experimental group (E) which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%), hyaline (46.92%) and proliferative (17.70%) layers. Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

Performance of a transmutation advanced device for sustainable energy application

International Nuclear Information System (INIS)

Garcia, C.; Rosales, J.; Garcia, L.; Perez-Navarro, A.; Escriva, A.; Abanades, A.

2009-01-01

Preliminary studies have been performed to design a device for nuclear waste transmutation and hydrogen generation based on a gas cooled pebble bed accelerator driven system, TADSEA (transmutation advanced device for sustainable energy application). In previous studies we have addressed the viability of an ADS Transmutation device that uses as fuel wastes from the existing LWR power plants, encapsulated in graphite in the form of pebble beds, being cooled by helium which enables high temperatures, in the order of 1200 K, to facilitate hydrogen generation from water either by high temperature electrolysis or by thermo chemical cycles. To design this device several configurations were studied, including several reactors thickness, to achieve the desired parameters, the transmutation of nuclear waste and the production of 100 MW. of thermal power. In this paper we are presenting new studies performed on deep burn in-core fuel management strategy for LWR waste. We analyze the fuel cycle on TADSEA device based on driver and transmutation fuel that were proposed for the General Atomic design of a gas turbine-modular helium reactor. We compare the transmutation results of the three fuel management strategies, using driven and transmutation, and standard LWR spend fuel, and present several parameters that describe the neutron performance of TADSEA nuclear core as the fuel and moderator temperature reactivity coefficients and transmutation chain. (author)

Performance of a transmutation advanced device for sustainable energy application

Energy Technology Data Exchange (ETDEWEB)

Garcia, C.; Rosales, J.; Garcia, L. [Instituto Superior de Tecnologias y Ciencias Aplicadas (INSTEC), La Habana (Cuba); Perez-Navarro, A.; Escriva, A. [Universidad Politecnica de Valencia, Valencia (Spain). Inst. de Ingenieria Energetica; Abanades, A. [Universidad Politecnica de Madrid (Spain). Grupo de Modelizacion de Sistemas Termoenergeticos

2009-07-01

Preliminary studies have been performed to design a device for nuclear waste transmutation and hydrogen generation based on a gas cooled pebble bed accelerator driven system, TADSEA (transmutation advanced device for sustainable energy application). In previous studies we have addressed the viability of an ADS Transmutation device that uses as fuel wastes from the existing LWR power plants, encapsulated in graphite in the form of pebble beds, being cooled by helium which enables high temperatures, in the order of 1200 K, to facilitate hydrogen generation from water either by high temperature electrolysis or by thermo chemical cycles. To design this device several configurations were studied, including several reactors thickness, to achieve the desired parameters, the transmutation of nuclear waste and the production of 100 MW. of thermal power. In this paper we are presenting new studies performed on deep burn in-core fuel management strategy for LWR waste. We analyze the fuel cycle on TADSEA device based on driver and transmutation fuel that were proposed for the General Atomic design of a gas turbine-modular helium reactor. We compare the transmutation results of the three fuel management strategies, using driven and transmutation, and standard LWR spend fuel, and present several parameters that describe the neutron performance of TADSEA nuclear core as the fuel and moderator temperature reactivity coefficients and transmutation chain. (author)

Selected Advances in Nanoelectronic Devices Logic, Memory and RF

CERN Document Server

Joodaki, Mojtaba

2013-01-01

Nanoelectronics, as a true successor of microelectronics, is certainly a major technology boomer in the 21st century. This has been shown by its several applications and also by its enormous potential to influence all areas of electronics, computers, information technology, aerospace defense, and consumer goods. Although the current semiconductor technology is projected to reach its physical limit in about a decade, nanoscience and nanotechnology promise breakthroughs for the future. The present books provides an in-depth review of the latest advances in the technology of nanoelectronic devices and their developments over the past decades. Moreover, it introduces new concepts for the realization of future nanoelectronic devices. The main focus of the book is on three fundamental branches of semiconductor products or applications: logic, memory, and RF and communication. By pointing out to the key technical challenges, important aspects and characteristics of various designs are used to illustrate mechanisms t...

Use of advanced programmable logic controllers to monitor and control the Elmo Bumpy Torus-proof-of-principle device

International Nuclear Information System (INIS)

Boyd, B.A.

1983-01-01

The Elmo Bumpy Torus - Proof-of-Principle (EBT-P) device is designed with an instrumentation and control system based upon the use of an advanced Programmable Logic Controller (PLC). The modern PLC incorporates many advanced programming features not available in earlier PLC's intended for application to conventional relay logic replacement. The additional power and flexibility of these modern PLC's is especially applicable to an experimental device such as EBT-P which is made up of several complex interrelated subsystems whose operational characteristics will be evolving throughout the lifetime of the device. The rationale for the selection of advanced PLC's for EBT-P and the approach taken to design of the software developed to control EBT-P are the topics addressed in this paper

Self-reinforced bioresorbable poly-L/DL-lactide [SR-P(L/DL)LA] 70/30 miniplates and miniscrews are reliable for fixation of anterior mandibular fractures: a pilot study.

Science.gov (United States)

Ylikontiola, Leena; Sundqvuist, Kai; Sàndor, George K B; Törmälä, Pertti; Ashammakhi, Nureddin

2004-03-01

Bioresorbable osteofixation devices are being increasingly used in orthognathic surgery and in cases of trauma to avoid problems associated with conventional metal osteofixation devices. The aim of this clinical study was to assess the reliability and efficacy of bioresorbable self-reinforced poly-L/DL-lactide (SR-P(L/DL)LA 70/30) plates and screws in the fixation of mandibular fractures in adults. Ten patients (20 to 49 years old) with isolated anterior mandibular parasymphyseal fractures were treated by means of open reduction and internal fixation using SR-P(L/DL)LA 70/30 bioresorbable plates and screws. During the minimum of 6 months of follow-up, no problems were encountered except for 1 case where a plate became exposed intraorally and infected. This required debridement and later excision of the exposed part of the plate. Despite this setback the fractured bone healed well. SR-P(L/DL)LA 70/30 plates and screws are reliable for internal fixation of anterior mandibular fractures in adults. Proper soft tissue coverage should be ensured to avoid plate exposure. Should implant exposure occur, it might be necessary to excise the exposed part after fracture healing (6-8 weeks postoperatively).

Mandibular asymmetry and the fourth dimension.

Science.gov (United States)

Kaban, Leonard B

2009-03-01

This paper represents more than 30 years of discussion and collaboration with Drs Joseph Murray and John Mulliken in an attempt to understand growth patterns over time (ie, fourth dimension) in patients with hemifacial microsomia (HFM). This is essential for the development of rational treatment protocols for children and adults with jaw asymmetry. Traditionally, HFM was thought of as a unilateral deformity, but it was recognized that 20% to 30% of patients had bilateral abnormalities. However, early descriptions of skeletal correction addressed almost exclusively lengthening of the short (affected) side of the face. Based on longitudinal clinical observations of unoperated HFM patients, we hypothesized that abnormal mandibular growth is the earliest skeletal manifestation and that restricted growth of the mandible plays a pivotal role in progressive distortion of both the ipsilateral and contralateral facial skeleton. This hypothesis explains the progressive nature of the asymmetry in patients with HFM and provides the rationale for surgical lengthening of the mandible in children to prevent end-stage deformity. During the past 30 years, we have learned that this phenomenon of progressive distortion of the adjacent and contralateral facial skeleton occurs with other asymmetric mandibular undergrowth (tumor resection, radiation therapy, or posttraumatic defects) and overgrowth (mandibular condylar hyperplasia) conditions. In this paper, I describe the progression of deformity with time in patients with mandibular asymmetry as a result of undergrowth and overgrowth. Understanding these concepts is critical for the development of rational treatment protocols for adults with end-stage asymmetry and for children to minimize secondary deformity.

Surgical-prosthetic treatment of large mandibular cysts

Directory of Open Access Journals (Sweden)

Džambas Ljubiša D.

2003-01-01

Full Text Available This paper presents a combined surgical-prosthetic procedure of reconstructing mandibular bone defect in a 53 year old patient, following enucleation of a mandibular cyst (Cystectomy Partsch II. After a thorough diagnostic evaluation, a surgical procedure was planned with the particular attention to the nature of the disease, patient’s condition, size and extension of the cyst, tissue loss, and the possibilities of prosthetic management of a mandibular bone defect with partial postresection dental prosthesis. It is of great importance to point to the significance of teamwork of a maxillofacial surgeon and a specialist in prosthodontics. This kind of cooperation provided very effective and less risky soft tissue, as well as bone tissue regeneration (osteogenesis. The patient’s recovery was fast, and he could return to his daily activities and work without significant changes regarding quality of life after surgery and prosthetic treatment.

Prospective audit of mandibular fractures at the Charlotte Maxeke ...

African Journals Online (AJOL)

Objective. This study was a prospective cross-sectional clinical audit of patients with mandibular fractures at the Charlotte Maxeke Johannesburg Academic Hospital. Methods. Between 1 March and 31 August 2004, patients with mandibular fractures seen by one clinician had their details recorded. Results. The female:male ...

A method for measuring three-dimensional mandibular kinematics in vivo using single-plane fluoroscopy

Science.gov (United States)

Chen, C-C; Lin, C-C; Chen, Y-J; Hong, S-W; Lu, T-W

2013-01-01

Objectives Accurate measurement of the three-dimensional (3D) motion of the mandible in vivo is essential for relevant clinical applications. Existing techniques are either of limited accuracy or require the use of transoral devices that interfere with jaw movements. This study aimed to develop further an existing method for measuring 3D, in vivo mandibular kinematics using single-plane fluoroscopy; to determine the accuracy of the method; and to demonstrate its clinical applicability via measurements on a healthy subject during opening/closing and chewing movements. Methods The proposed method was based on the registration of single-plane fluoroscopy images and 3D low-radiation cone beam CT data. It was validated using roentgen single-plane photogrammetric analysis at static positions and during opening/closing and chewing movements. Results The method was found to have measurement errors of 0.1 ± 0.9 mm for all translations and 0.2° ± 0.6° for all rotations in static conditions, and of 1.0 ± 1.4 mm for all translations and 0.2° ± 0.7° for all rotations in dynamic conditions. Conclusions The proposed method is considered an accurate method for quantifying the 3D mandibular motion in vivo. Without relying on transoral devices, the method has advantages over existing methods, especially in the assessment of patients with missing or unstable teeth, making it useful for the research and clinical assessment of the temporomandibular joint and chewing function. PMID:22842637

Variant Root Morphology of Third Mandibular Molar in Normal and ...

African Journals Online (AJOL)

isaac kipyator

2017-11-12

Nov 12, 2017 ... ABSTRACT. The mandibular third molar poses a challenge to dental surgeons due to it's unpredictable morphology ... treatment in the School of Dental Sciences since 2010. ... mandibular third molar include presence of three.

Quiste óseo aneurismático mandibular

Directory of Open Access Journals (Sweden)

Denia Morales Navarro

Full Text Available El quiste óseo aneurismático es definido como una lesión osteolítica expansiva que consiste en espacios llenos de sangre y canales divididos por tabiques de tejido conectivo, los cuales contienen tejido osteoide y células gigantes multinucleadas. El objetivo es presentar un caso clínico poco común de un quiste óseo aneurismático de la región del cuerpo mandibular. Se trata de una paciente femenina de 39 años de edad que acudió a consulta externa del Servicio de Cirugía Maxilofacial del Hospital Universitario "General Calixto García" por aumento de volumen en región mandibular derecha y dolor intenso de 1 mes de evolución. Radiográficamente se detectó un área radiolúcida unilocular de bordes bien definidos; se realizó curetaje de la cavidad, y estudio histopatológico de la lesión que informó la presencia de un quiste óseo aneurismático. Se concluye que el quiste óseo aneurismático es más común en los huesos largos y en la región del ángulo mandibular en el esqueleto facial, por lo que la presentación de este en el cuerpo mandibular resulta de interés.

Mastication markedly affects mandibular condylar cartilage growth, gene expression, and morphology.

Science.gov (United States)

Enomoto, Akiko; Watahiki, Junichi; Nampo, Tomoki; Irie, Tarou; Ichikawa, Yuuta; Tachikawa, Tetsuhiko; Maki, Koutaro

2014-09-01

Mandibular growth is believed to be strongly related to mastication. Furthermore, mandibular condylar cartilage is known to be derived from neural crest cells. We examined whether the degree of chewing affects condylar cartilage growth of the mandible. Mice were fed diets with varying hardness. Genes specific to neural crest-derived cells were measured by real-time polymerase chain reaction to compare the expression changes between the mandibular and tibia cartilages. The mandibular condylar cartilage was then evaluated histologically, and proliferation was evaluated using proliferating cell nuclear antigen. Immunostaining was conducted for osteopontin, type X collagen, and Musashi1, and real-time polymerase chain reaction was used to assess the expression levels of osteopontin and type X collagen. Markers including P75, Wnt-1, Musashi1, and Nestin were upregulated in the mandibular condylar cartilage as compared with the tibial cartilage. Histologic assessment of the mandibular cartilage showed that the hypertrophic chondrocyte zone was statistically significantly thicker in mice fed a hard diet. Chondrocyte proliferation and Musashi1 expression were lower in mice fed a hard diet. After 4 weeks, numerous osteopontin and type X collagen-positive cells were observed in mice fed a mixed diet. Mastication affects the balance between differentiation and proliferation in the mandibular condylar cartilage. This phenomenon might be attributed to the presence of neural crest-derived cells. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Radiographic analysis of odontogenic cysts showing displacement of the mandibular canal

International Nuclear Information System (INIS)

Cho, Bong Hae

2003-01-01

To assess the radiographic findings of odontogenic cysts showing displacement of the mandibular canal using computed tomographic (CT) and panoramic images. CT and panoramic images of 63 odontogenic cysts (27 dentigerous, 16 odontogenic keratocysts, and 20 radicular cysts) were analyzed to evaluate the following parameters: the dimension and shape of the cysts, and the effect of the cysts on the mandibular canal and cortical plates. Of the 63 cysts examined in the study, 35 (55.6%) showed inferior displacement of the mandibular canal and 46 (73.0%) showed perforation of the canal. There were statistically significant differenced between CT and panoramic images in depicting displacement and perforation of the mandibular canal. Cortical expansion was seen in 46 cases (73.0%) and cortical perforation in 23 cases (36.5%). The radicular cysts showed cortical expansion and perforation less frequently than the other cyst groups. Large cysts of mandible should be evaluated by multiplanar CT images in order to detect the mandibular canal and cortical bone involvement.

Deoxycholic Acid and the Marginal Mandibular Nerve: A Cadaver Study.

Science.gov (United States)

Blandford, Alexander D; Ansari, Waseem; Young, Jason M; Maley, Bruce; Plesec, Thomas P; Hwang, Catherine J; Perry, Julian D

2018-06-04

One of the rare but serious complications observed with deoxycholic acid administration is damage to the marginal mandibular nerve. In this study, we evaluated if deoxycholic acid directly induces histologic damage to fresh cadaveric marginal mandibular nerve. A segment of marginal mandibular nerve was harvested from 12 hemifaces of 6 fresh cadavers. The nerve specimen was exposed to either 0.9% sterile saline for 24 h, deoxycholic acid (10 mg/ml) for 20 min, or deoxycholic acid (10 mg/ml) for 24 h. The nerve specimens were then fixed in glutaraldehyde for a minimum of 24 h. Toluidine blue stained sections were evaluated for stain intensity using light microscopy and color deconvolution image analysis. Supraplatysmal fat was harvested as a positive control and exposed to the same treatments as the marginal mandibular nerve specimens, then evaluated using transmission electron microscopy. Toluidine blue staining was less in the marginal mandibular nerve exposed to deoxycholic acid when compared to saline. The specimen exposed to deoxycholic acid for 24 h showed less toluidine blue staining than that of the nerve exposed to deoxycholic acid for 20 min. Transmission electron microscopy of submental fat exposed to deoxycholic acid revealed disruption of adipocyte cell membrane integrity and loss of cellular organelles when compared to specimens only exposed to saline. Deoxycholic acid (10 mg/ml) damages the marginal mandibular nerve myelin sheath in fresh human cadaver specimens. Direct deoxycholic acid neurotoxicity may cause marginal mandibular nerve injury clinically. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Congenitally missing mandibular second premolars: clinical options.

Science.gov (United States)

Kokich, Vincent G; Kokich, Vincent O

2006-10-01

Congenital absence of mandibular second premolars affects many orthodontic patients. The orthodontist must make the proper decision at the appropriate time regarding management of the edentulous space. These spaces can be closed or left open. If the space will be left open for an eventual restoration, the keys during orthodontic treatment are to create the correct amount of space and to leave the alveolar ridge in an ideal condition for a future restoration. If the space will be closed, the clinician must avoid any detrimental alterations to the occlusion and the facial profile. Some early decisions that the orthodontist makes for a patient whose mandibular second premolars are congenitally missing will affect his or her dental health for a lifetime. Therefore, the correct decision must be made at the appropriate time. In this article, we present and discuss various treatment alternatives for managing orthodontic patients with at least 1 congenitally missing mandibular second premolar.

The Psychological Status of Patients with Acute Mandibular Injury

Directory of Open Access Journals (Sweden)

A. N. Pudov

2012-01-01

Full Text Available Objective: to define the specific features of the psychological status of patients with acute mandibular injury, to compare a psychological reaction to injury in different age groups and in persons with signs of alcohol addiction. Subjects and methods. The study enrolled 37 patients of both sexes over 15 years of age. The patients were distributed by age and chronic alcohol intoxication. Psychological parameters were determined using personality questionnaires: Spielberg-Hanin, Zung, GHQ-28, and Wein ones. Results. The patients with mandibular injury were found to have higher levels of situational and personality anxiety. A state of depression as a response to acute mandibular injury of reactive genesis was found in 29.8% of cases. Autonomic dysfunction occurred in 62.2% of the patients with mandibular fractures. Occult pathopsychological states were detected in 35.1% of the study group patients. Conclusion. The main found peculiarities of the psychological status of the patients with acute mandibular injury were high anxiety and the considerable incidence of autonomic dysfunction syndrome. There were no great age differences in psychological status and the direction of reactions. The patients with chronic alcohol intoxication more frequently developed a depressive state, but the autonomic dysfunction syndrome was just less often encountered and pathopsychological states were less frequently found. Key words: acute low anxiety depression alcohol abuse, psychological status.

Bone changes of mandibular condyle using cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon [Chonbuk National Univ., Chonju (Korea, Republic of)

2007-09-15

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78{sub 0}.84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images.

Bone changes of mandibular condyle using cone beam computed tomography

International Nuclear Information System (INIS)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon

2007-01-01

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78 0 .84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images

Mandibular incisive canal in relation to periapical surgery

Directory of Open Access Journals (Sweden)

Kani Bilginaylar

2016-01-01

Full Text Available The aim of the present paper is to emphasize the importance of the mandibular interforaminal neurovascular bundle with a case and make a warning to dentists and surgeons during oral and maxillofacial surgeries, such as implant replacement, bone harvesting, genioplasty, open reduction of a mandibular fracture, and cyst enucleations at this region. In this paper, we present a 58-year-old male who referred with pain and a tingling sensation on the left lower lip. After radiographical, extraoral and intraoral examinations, findings indicated the lesion to be a cyst which was related with a periapical lesion of the canine tooth and extracted socket of first premolar tooth. After removal of a cyst, the mandibular incisive nerve was documented which was in relation to cyst cavity.

A randomized cross over study comparing the efficacy of two mandibular advancement appliances in the treatment of mild-moderate obstructive sleep apnea.

Science.gov (United States)

Al-Dharrab, Ayman

2017-11-01

To compare efficacy, side effects, patient compliance, and preference between two types of custom-made mandibular advancement appliances (MAAs) in the treatment of patients with mild to moderate obstructive sleep apnea (OSA). This prospective, randomized, crossover study of 12 patients with mild to moderate OSA compared a titratable and a non-titratable MAA. Each patient was fitted with both appliances in a random order with a washout period of two weeks. Efficacy, side effects, compliance, and preference were evaluated by a questionnaire. All patients underwent overnight home sleep recordings prior to and after the use of each appliance in order to objectively assess sleep quality in terms of the apnea and hypopnea index (AHI), snoring frequency and oxygen desaturation index. Treatment successes (relief of symptoms and/or reduction of AHI to appliances. No compliance failure was reported, and in most patients, the side effects were mild, and improved with time. Both types of oral appliances were effective treatments for patients with mild to moderate OSA, with fewer side effects and higher patient satisfaction.

The Use of Remotely Controlled Mandibular Positioner as a Predictive Screening Tool for Mandibular Advancement Device Therapy in Patients with Obstructive Sleep Apnea through Single-Night Progressive Titration of the Mandible: A Systematic Review

Science.gov (United States)

Kastoer, Chloé; Dieltjens, Marijke; Oorts, Eline; Hamans, Evert; Braem, Marc J.; Van de Heyning, Paul H.; Vanderveken, Olivier M.

2016-01-01

Study Objectives: To perform a review of the current evidence regarding the use of a remotely controlled mandibular positioner (RCMP) and to analyze the efficacy of RCMP as a predictive selection tool in the treatment of obstructive sleep apnea (OSA) with oral appliances that protrude the mandible (OAm), exclusively relying on single-night RCMP titration. Methods: An extensive literature search is performed through PubMed.com, Thecochranelibrary.com (CENTRAL only), Embase.com, and recent conference meeting abstracts in the field. Results: A total of 254 OSA patients from four full-text articles and 5 conference meeting abstracts contribute data to the review. Criteria for successful RCMP test and success with OAm differed between studies. Study populations were not fully comparable due to range-difference in baseline apneahypopnea index (AHI). However, in all studies elimination of airway obstruction events during sleep by RCMP titration predicted OAm therapy success by the determination of the most effective target protrusive position (ETPP). A statistically significant association is found between mean AHI predicted outcome with RCMP and treatment outcome with OAm on polysomnographic or portable sleep monitoring evaluation (p titration of the mandible: a systematic review. J Clin Sleep Med 2016;12(10):1411–1421. PMID:27568892

Applied solid state science advances in materials and device research

CERN Document Server

Wolfe, Raymond

2013-01-01

Applied Solid State Science: Advances in Materials and Device Research, Volume 4 covers articles on single crystal compound semiconductors and complex polycrystalline materials. The book discusses narrow gap semiconductors and solid state batteries. The text then describes the advantages of hot-pressed microcrystalline compacts of oxygen-octahedra ferroelectrics over single crystal materials, as well as heterostructure junction lasers. Solid state physicists, materials scientists, electrical engineers, and graduate students studying the subjects being discussed will find the book invaluable.

Applied solid state science advances in materials and device research

CERN Document Server

Wolfe, Raymond

2013-01-01

Applied Solid State Science: Advances in Materials and Device Research, Volume 1 presents articles about junction electroluminescence; metal-insulator-semiconductor (MIS) physics; ion implantation in semiconductors; and electron transport through insulating thin films. The book describes the basic physics of carrier injection; energy transfer and recombination mechanisms; state of the art efficiencies; and future prospects for light emitting diodes. The text then discusses solid state spectroscopy, which is the pair spectra observed in gallium phosphide photoluminescence. The extensive studies

Reduced mandibular range of motion in Duchenne Muscular Dystrophy: predictive factors.

Science.gov (United States)

van Bruggen, H W; Van Den Engel-Hoek, L; Steenks, M H; Bronkhorst, E M; Creugers, N H J; de Groot, I J M; Kalaykova, S I

2015-06-01

Patients with Duchenne muscular dystrophy (DMD) experience negative effects upon feeding and oral health. We aimed to determine whether the mandibular range of motion in DMD is impaired and to explore predictive factors for the active maximum mouth opening (aMMO). 23 patients with DMD (mean age 16.7 ± 7.7 years) and 23 controls were assessed using a questionnaire about mandibular function and impairments. All participants underwent a clinical examination of the masticatory system, including measurement of mandibular range of motion and variables related to mandibular movements. In all patients, quantitative ultrasound of the digastric muscle and the geniohyoid muscle and the motor function measure (MFM) scale were performed. The patients were divided into early and late ambulatory stage (AS), early non-ambulatory stage (ENAS) and late non-ambulatory stage (LNAS). All mandibular movements were reduced in the patient group (P < 0.001) compared to the controls. Reduction in the aMMO (<40 mm) was found in 26% of the total patient group. LNAS patients had significantly smaller mandibular movements compared to AS and ENAS (P < 0.05). Multiple linear regression analysis for aMMO revealed a positive correlation with the body height and disease progression, with MFM total score as the strongest independent risk factor (R(2) = 0.71). Mandibular movements in DMD are significantly reduced and become more hampered with loss of motor function, including the sitting position, arm function, and neck and head control. We suggest that measurement of the aMMO becomes a part of routine care of patients with DMD. © 2015 John Wiley & Sons Ltd.

Regenerative approach to bilateral rostral mandibular reconstruction in a case series of dogs

Directory of Open Access Journals (Sweden)

Boaz eArzi

2015-03-01

Full Text Available Extensive rostral mandibulectomy in dogs typically results in instability of the mandibles that may lead to malocclusion, difficulty in eating and drinking, food prehension, and pain of the temporomandibular joint. Large rostral mandibular defects are challenging to reconstruct due to the complex geometry of this region. In order to restore mandibular continuity and stability following extensive rostral mandibulectomy, we developed a surgical technique using a combination of intraoral and extraoral approaches, a locking titanium plate and a compression resistant matrix (CRM infused with rhBMP-2. Furthermore, surgical planning that consisted of computed tomographic (CT scanning and 3D model printing were utilized. We describe a regenerative surgical technique for immediate or delayed reconstruction of critical-size rostral mandibular defects in 5 dogs. Three dogs had healed with intact gingival covering over the mandibular defect and had immediate return to normal function and occlusion. Two dogs had the complication of focal plate exposure and dehiscence, which was corrected with mucosal flaps and suturing; these dogs have since healed with intact gingival covering over the mandibular defect. Mineralized tissue formation was palpated clinically within 2 weeks and solid bone formation within 3 months. Computed tomography findings at 6 months postoperatively demonstrated that the newly regenerated mandibular bone had increased in mineral volume with evidence of integration between the native bone, new bone and CRM compared to the immediate postoperative CT. We conclude that rostral mandibular reconstruction using a regenerative approach provides an excellent solution for restoring mandibular continuity and preventing mandibular instability in dogs.

Comparison of circummandibular wiring with resorbable bone plates in pediatric mandibular fractures.

Science.gov (United States)

Saikrishna, D; Gupta, Nimish

2010-06-01

Pediatric patients present a unique challenge to maxillofacial surgeons in terms of their treatment planning as well as in their functional and nutritional needs which are different from that of adult patients. Early literature has advocated conservative closed management of pediatric fractures to prevent complications. However recent advances in maxillofacial surgery has enabled us to use biodegradable plates and screws, which overcomes the limitations of metallic plates. We present a comparison of two cases of parasymphysis fracture treated with circum-mandibular wiring and biodegradable plate fixation their outcome in terms of fracture healing and functional stability.

Treatment of Obstructive Sleep Apnea Using Temporary Mandible Advancement Device: A Case Report

Directory of Open Access Journals (Sweden)

Young-Chan Choi

2015-06-01

Full Text Available Obstructive sleep apnea (OSA is the most prevalent type of sleep apnea, and oral appliance may be one of the options for treatment of OSA. But, the problems with the oral appliance are high cost, possible low compliance, and complications such as temporomandibular disorder. In this article, we described a severe OSA case that was successfully improved by using temporary mandible advancement device, which was designed for therapeutic effect of mandible advancement with low cost and simplified fabrication procedure.

Mandibular osteosynthesis in a Boa constrictor snake

Directory of Open Access Journals (Sweden)

Jorge Luiz Costa Castro

2014-02-01

Full Text Available Nowadays are observed an increase in the finding of certain wild animals in urban areas, due to environmental changes caused by deforestation and economic use of natural areas. It causes disappearance of usual prey and forces these animals, including snakes, to migrate to urban areas, becoming vulnerable to injuries caused by aggressions, car accidents and capture. Mandibular and maxillar fractures are common in many animal species, representing about 3-6% of all bone fractures in dogs and cats. Mandibular trauma usually occurs as a result of fights, car accidents and improper handling and/or restraint, and fractures can be closed or open, clean or contaminated. The jaw is a flat bone with differences from the long bones that should be taken into consideration for successful treatment, being minimal muscle coverage and need to maintain occlusion factors that influence the definition of the best ostheosynthesis method. The methods of stabilization include using intramedullary pins, wires, external skeletal fixation, bone plate, and acrylic resin. Conventional bone plates are efficient but related to some complications, such as the necessity of muscular elevation and high risk of injuries to mandibular structures. This article describes the successful results of the application of plate and screws in the ostheosynthesis of a mandibular fracture in a female Boa constrictor snake with weight of 8.0 kg and length of 1.80 m, at the RIOZOO Foundation (Rio de Janeiro, RJ, Brazil.

Mandibular second molar with 3 mesial canals and a radix paramolaris

Directory of Open Access Journals (Sweden)

N Ragavendran

2014-01-01

Full Text Available Mandibular first molar commonly has two roots, the mesial and the distal root. Surprisingly in some mandibular first molar has an unusual extra third root in between mesial and distal root. This extra root is the most commonly seen in lingual side and is called as radix entomolaris. If this extra root is seen on the buccal side, it is termed as radix paramolaris (RP, which is a very rare phenomenon. Recently, various case report studies has shown the presence of third canal in the mesial and distal roots of mandibular molars. They are named as middle mesial and middle distal canal, respectively. Here, we present a case report of mandibular second molar showing three canals in the mesial root and a RP.

Restricted Mandibular Movement Attributed to Ossification of Mandibular Depressors and Medial Pterygoid Muscles in Patients With Fibrodysplasia Ossificans Progressiva: A Report of 3 Cases.

Science.gov (United States)

Okuno, Tetsuko; Suzuki, Hitoshi; Inoue, Akio; Kusukawa, Jingo

2017-09-01

Fibrodysplasia ossificans progressiva (FOP) is an extremely rare genetic condition characterized by congenital malformation and progressive heterotopic ossification (HO) caused by a recurrent single nucleotide substitution at position 617 in the ACVR1 gene. As the condition progresses, HO leads to joint ankylosis, breathing difficulties, and mouth-opening restriction, and it can shorten the patient's lifespan. This report describes 3 cases of FOP confirmed by genetic testing in patients with restricted mouth opening. Each patient presented a different onset and degree of jaw movement restriction. The anatomic ossification site of the mandibular joint was examined in each patient using reconstructed computed tomographic (CT) images and 3-dimensional reconstructed CT (3D-CT) images. A 29-year-old woman complained of jaw movement restriction since 13 years of age. 3D-CT image of the mandibular joint showed an osseous bridge, formed by the mandibular depressors that open the mouth, between the hyoid bone and the mentum of the mandible. A 39-year-old man presented with jaw movement restriction that developed at 3 years of age after a mouth injury. 3D-CT image of the jaw showed ankylosis of the jaw from ossification of the mandibular depressors that was worse than in patient 1. CT images showed no HO findings of the masticatory muscles. To the authors' knowledge, these are the first 2 case descriptions of the anatomic site of ankylosis involving HO of the mandibular depressors in the jaw resulting from FOP. In contrast, a 62-year-old bedridden woman with an interincisal distance longer than 10 mm (onset, 39 years of age) had no HO of the mandibular depressors and slight HO of the medial pterygoid muscle on the right and left sides. These findings suggest that restricted mouth opening varies according to the presence or absence of HO of the mandibular depressors. Copyright © 2017. Published by Elsevier Inc.

Verification, Validation and Credibility Assessment of a Computational Model of the Advanced Resistive Exercise Device (ARED)

Science.gov (United States)

Werner, C. R.; Humphreys, B. T.; Mulugeta, L.

2014-01-01

The Advanced Resistive Exercise Device (ARED) is the resistive exercise device used by astronauts on the International Space Station (ISS) to mitigate bone loss and muscle atrophy due to extended exposure to microgravity (micro g). The Digital Astronaut Project (DAP) has developed a multi-body dynamics model of biomechanics models for use in spaceflight exercise physiology research and operations. In an effort to advance model maturity and credibility of the ARED model, the DAP performed verification, validation and credibility (VV and C) assessment of the analyses of the model in accordance to NASA-STD-7009 'Standards for Models and Simulations'.

A correlational study of scoliosis and trunk balance in adult patients with mandibular deviation.

Directory of Open Access Journals (Sweden)

Shuncheng Zhou

Full Text Available Previous studies have confirmed that patients with mandibular deviation often have abnormal morphology of their cervical vertebrae. However, the relationship between mandibular deviation, scoliosis, and trunk balance has not been studied. Currently, mandibular deviation is usually treated as a single pathology, which leads to poor clinical efficiency. We investigated the relationship of spine coronal morphology and trunk balance in adult patients with mandibular deviation, and compared the finding to those in healthy volunteers. 35 adult patients with skeletal mandibular deviation and 10 healthy volunteers underwent anterior X-ray films of the head and posteroanterior X-ray films of the spine. Landmarks and lines were drawn and measured on these films. The axis distance method was used to measure the degree of scoliosis and the balance angle method was used to measure trunk balance. The relationship of mandibular deviation, spine coronal morphology and trunk balance was evaluated with the Pearson correlation method. The spine coronal morphology of patients with mandibular deviation demonstrated an "S" type curve, while a straight line parallel with the gravity line was found in the control group (significant difference, p1°, while the control group had a normal trunk balance (imbalance angle <1°. There was a significant difference between the two groups (p<0.01. The degree of scoliosis and shoulder imbalance correlated with the degree of mandibular deviation, and presented a linear trend. The direction of mandibular deviation was the same as that of the lateral bending of thoracolumbar vertebrae, which was opposite to the direction of lateral bending of cervical vertebrae. Our study shows the degree of mandibular deviation has a high correlation with the degree of scoliosis and trunk imbalance, all the three deformities should be clinically evaluated in the management of mandibular deviation.

Mandibular ramus: A predictor for sex determination - A digital radiographic study

Directory of Open Access Journals (Sweden)

Kotya Naik Maloth

2017-01-01

Full Text Available Aim: To evaluate mandibular ramus linear measurements on digital panoramic radiographs and to assess the usefulness of mandibular ramus in sex determination. Material and Methods: A retrospective study was conducted on 100 patients (50 males and 50 females using digital panoramic radiographs of Khammam population with age ranging from 20 to 50 years. Standard digital panoramic radiographs were taken without any errors by Sirona, ORTHOPHOS XG 5 machine. The following five mandibular linear measurements were performed in cm such as upper ramus breadth, lower ramus breadth, condylar ramus height, projective ramus height, and coronoid ramus height. The obtained data were analyzed with the software SPSS 13.0 for statistical analysis using discriminate methods. Results: In the present study, all the linear measurements of mandibular ramus on digital panoramic radiographs showed a statistically significant difference between the genders. Conclusion: We conclude that the use of mandibular ramus is recommended as an aid for sex determination in forensic science due to their unique feature of sexual dimorphism.

Clinical importance of median mandibular flexure in oral rehabilitation: a review.

Science.gov (United States)

Sivaraman, K; Chopra, A; Venkatesh, S B

2016-03-01

The mandible has a property to flex inwards around the mandibular symphysis with change in shape and decrease in mandibular arch width during opening and protrusion of the mandible. The mandibular deformation may range from a few micrometres to more than 1 mm. The movement occurs because of the contraction of lateral pterygoid muscles that pulls mandibular condyles medially and causes a sagittal movement of the posterior segments. This movement of mandible can have a profound influence on prognosis and treatment outcome for various restorative, endodontics, fixed, removable and implant-related prosthesis. The review unfolds the causes, importance and clinical implications of median mandibular flexure in oral rehabilitation. This review also highlights the appropriate preventive measures and techniques that should be adopted by clinicians to minimise the effect of flexural movement of the jaw during oral rehabilitation. This would not only help clinicians to achieve a good prosthesis with accurate fit and longevity but also maintain the health of the surrounding periodontal or periimplant gingival tissues and bone. © 2015 John Wiley & Sons Ltd.

Mandibular growth changes and cervical vertebral maturation. a cephalometric implant study.

Science.gov (United States)

Gu, Yan; McNamara, James A

2007-11-01

To evaluate mandibular dimensional changes and regional remodeling occurring during five intervals of circumpubertal growth. This investigation evaluated a unique sample of subjects in whom tantalum implants were placed into the craniofacial complex during childhood. The sample was obtained from the Mathews and Ware implant study originally conducted at the University of California San Francisco in the 1970s, with longitudinal cephalometric records of 20 subjects (13 female, 7 male) available for evaluation. Cephalograms at six consecutive stages of cervical vertebral maturation (CS1 through CS6) were analyzed. Peak mandibular growth was noted during the interval from CS3 to CS4. Forward rotation of the mandible was due to greater mandibular growth posteriorly than anteriorly. Progressive closure of the condylar-ramus-occlusal (CRO) angle resulted in a forward and upward orientation of the ramus relative to the corpus of the mandible due to increased vertical growth of the condyle. A peak in mandibular growth at puberty was substantiated. Mandibular remodeling and condylar rotation continue to occur after the growth spurt.

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult

Directory of Open Access Journals (Sweden)

Zaki Hakami

2018-01-01

Full Text Available This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

OpenAIRE

Seyed Mohammadreza Safavi; Farnaz Younessian; Sarvraj Kohli

2013-01-01

In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen ...

Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult.

Science.gov (United States)

Hakami, Zaki; Chen, Po Jung; Ahmida, Ahmad; Janakiraman, Nandakumar; Uribe, Flavio

2018-01-01

This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

Prehospital ECG transmission: comparison of advanced mobile phone and facsimile devices in an urban Emergency Medical Service System.

Science.gov (United States)

Väisänen, Olli; Mäkijärvi, Markku; Silfvast, Tom

2003-05-01

To compare the speed and reliability of electrocardiogram (ECG) transmissions from the prehospital setting to a conventional table facsimile device and to an advanced mobile phone in a Helicopter Emergency Medical Service System (HEMS). Eighteen authentic ECGs stored in the memory module of a monitor defibrillator were used. The ECGs were (1) sent directly from the monitor defibrillator to a table fax and an advanced mobile phone at the HEMS base; (2) printed out and sent from a mobile fax connected to an ordinary mobile phone to the table fax and the advanced mobile phone at the HEMS base; (3) printed out and sent from an ordinary table fax as well as from a table fax connected to a satellite phone system to the receiving devices at the HEMS base. When the ECGs were sent from the table fax via satellite, the transmission times were longer to the advanced mobile phone than to the table fax at the HEMS base (1 min 54 s+/-0 min 21 s vs. 1 min 37 s+/-0 min 20 s, (mean+/-SD), (Ptransmission from the other fax devices, there were no differences in transmission times between the two receiving devices. The fastest way to transmit ECGs to the advanced mobile phone was to send it from conventional table fax (1 min 22 s+/-0 min 18 s) and the longest transmission times were with mobile fax connected to mobile phone (5 min 23 s+/-3 min 5 s). In all ECGs transmitted except one the cardiac rhythm and ST-changes could be recognised. An advanced mobile phone is as fast and reliable as a conventional table fax in receiving ECGs. A mobile phone with advanced features is a practical tool for HEMS physicians who need to evaluate ECGs in the prehospital setting.

[Congenital malformations of the temporo-mandibular joint and the mandibular ramus: Grafting vs distraction osteogenesis].

Science.gov (United States)

Gallucci, A; Graillon, N; Foletti, J M; Chossegros, C; Cheynet, F

2016-09-01

Congenital deformities of the mandibular ramus and of the temporo-mandibular joint are treated by surgery since the early 20th century. However, morphological and functional results are often disappointing, accounting for iterative operations. Today, a clear consensus concerning the type of intervention to be proposed, and at what age it should be carried out does not yet exist. For mild cases, "conventional" orthognathic or osteogenic distraction procedures seem to work well, especially if they are carried out at the end of growth. In severe cases, it is often necessary to proceed in several surgical steps, usually starting with a chondrocostal graft, especially when interceptive surgery, performed before the end of growth, is preferred in order to improve the patient's quality of life. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Lower molar and incisor displacement associated with mandibular remodeling.

Science.gov (United States)

Baumrind, S; Bravo, L A; Ben-Bassat, Y; Curry, S; Korn, E L

1997-01-01

The purpose of this study was to quantify the amount of alveolar modeling at the apices of the mandibular incisor and first molar specifically associated with appositional and resorptive changes on the lower border of the mandible during growth and treatment. Cephalometric data from superimpositions on anterior cranial base, mandibular implants of the Björk type, and anatomical "best fit" of mandibular border structures were integrated using a recently developed strategy, which is described. Data were available at annual intervals between 8.5 and 15.5 years for a previously described sample of approximately 30 children with implants. The average magnitudes of the changes at the root apices of the mandibular first molar and central incisor associated with modeling/remodeling of the mandibular border and symphysis were unexpectedly small. At the molar apex, mean values approximated zero in both anteroposterior and vertical directions. At the incisor apex, mean values approximated zero in the anteroposterior direction and averaged less than 0.15 mm/year in the vertical direction. Standard deviations were roughly equal for the molar and the incisor in both the anteroposterior and vertical directions. Dental displacement associated with surface modeling plays a smaller role in final tooth position in the mandible than in the maxilla. It may also be reasonably inferred that anatomical best-fit superimpositions made in the absence of implants give a more complete picture of hard tissue turnover in the mandible than they do in the maxilla.

Peripheral Osteoma of the Mandibular Notch: Report of a Case

International Nuclear Information System (INIS)

Iwai, Toshinori; Izumi, Toshiharu; Baba, Junichi; Maegawa, Jiro; Mitsudo, Kenji; Tohnai, Iwai

2013-01-01

Osteoma is a benign, slow-growing osteogenic tumor that sometimes arises from the craniomaxillofacial region, such as the sinus, temporal or jaw bones. Osteoma consists of compact or cancellous bone that may be peripheral, central or extraskeletal type. Peripheral osteoma arises from the periosteum and is commonly a unilateral, pedunculated mushroom-like mass. Peripheral osteoma of the mandible is relatively uncommon, and peripheral osteoma of the mandibular notch is extremely rare, although many cases arise from the mandibular body, angle, condyle, or coronoid process. We report here an unusual peripheral osteoma of the mandibular notch in a 78-year-old nonsyndromic female

Maxillary palatal ramp prosthesis: A prosthodontic solution to manage mandibular deviation following surgery

Directory of Open Access Journals (Sweden)

Sampa Ray (Bhattacharya

2015-01-01

Full Text Available Mandibular resection following surgical treatment for neoplastic lesions of the oral cavity leads to numerous complications including altered mandibular movements, disfigurement, difficult in swallowing, impaired speech and articulation, and deviation of the mandible towards the resected site. Various prosthetic methods are employed to reduce or minimize mandibular deviation and improve and restore the lost functions and esthetic, like maxillomandibular fixation, implant supported prosthesis, removable mandibular guide flange prosthesis, and palatal based guidance restoration. This clinical report describes the rehabilitation of a patient following segmental mandibulectomy using palatal ramp prosthesis.

[Trigeminal motor paralysis and dislocation of the temporo-mandibular joints].

Science.gov (United States)

Ohkawa, S; Yoshida, T; Ohsumi, Y; Tabuchi, M

1996-07-01

A 64-year-old woman with diabetes mellitus was admitted to our hospital with left hemiparesis of sudden onset. A brain MRI demonstrated a cerebral infarction in the ventral part of the right lower pons. When left hemiparesis worsened, she had dislocation of the temporo-mandibular joints repeatedly. Then, her lower jaw deviated to the right when she opened her mouth. Also, there was decreased contraction of the right masseter when she clenched her teeth. These findings suggest that there was trigeminal motor paralysis on the right side resulting from involvement of the intrapontine trigeminal motor nerve. She has no history of dislocation of the temporo-mandibular joints. An X-ray film showed that the temporo-mandibular joints were intact. Thus, it is possible that deviation of the lower jaw was the cause of this dislocation. We suspect that dislocation of the temporo-mandibular joints may occur as a complication of unilateral trigeminal motor paralysis. This has not been reported to our knowledge.

[Bruxism, temporo-mandibular dysfunction and botulinum toxin].

Science.gov (United States)

Chikhani, L; Dichamp, J

2003-07-01

Tooth grinding and tooth clenching are unvoluntary mainly nocturnal habits that result in an hypertrophy of masseter and temporalis muscles with an unbalance between opening and closing muscles of the jaw and lead to an alteration of mandibular condyles movements and to hyper pressure in the temporo-mandibular joints (TMJ) which can generate severe pain. Intra muscular injections of botulinum toxin permit to restablish the balance between closing and opening muscles, to relieve pain, to treat masseteric hypertrophy with improvement of face outline and to recover a normal cinetic of temporo-mandibular joints. Moreover, botulinum toxin injections permit to quit habits of tooth grinding and clenching and one single session of injections is curative for 2/3 of the patients. There are no side effects apart from slight diffusion to superficial muscles of the face resulting in a "fixed" smile for about 6 to 8 weeks. So injections of botulinum toxin in masseter and temporalis muscles are an efficient treatment of bruxism and TMJ dysfunction, cheap with no lasting side effect.

Evaluation of Recurring Esthetic Dental Proportion in Natural Mandibular Anterior Dentition

Directory of Open Access Journals (Sweden)

Dipti S Shah

2015-01-01

Results: After calculating proportions in mandibular anterior teeth, P value was found to be statistically insignificant (P > 0.05. Conclusion: Within the limitations of the study, RED proportion was not seen in mandibular natural dentition.

Piezosurgery versus Rotatory Osteotomy in Mandibular Impacted Third Molar Extraction

Science.gov (United States)

Bhati, Bharat; Kukreja, Pankaj; Kumar, Sanjeev; Rathi, Vidhi C.; Singh, Kanika; Bansal, Shipra

2017-01-01

Aim: The aim of this study is to compare piezoelectric surgery versus rotatory osteotomy technique in removal of mandibular impacted third molar. Materials and Methods: Sample size of 30 patients 18 males, 12 females with a mean age of 27.43 ± 5.27. Bilateral extractions were required in all patients. All the patients were randomly allocated to two groups in one group, namely control group, surgical extraction of mandibular third molar was done using conventional rotatory osteotomy and in the other group, namely test group, extraction of lower third molar was done using Piezotome. Results: Parameters assessed in this study were – mouth opening (interincisal opening), pain (visual analog scale VAS score), swelling, incidence of dry socket, paresthesia and duration of surgery in both groups at baseline, 1st, 3rd, and 7th postoperative day. Comparing both groups pain scores with (P piezosurgery group (51.40 ± 17.9) minutes compared to the conventional rotatory group with a mean of (37.33 ± 15.5) minutes showing a statistically significant difference (P = 0.002). Conclusion: The main advantages of piezosurgery include soft tissue protection, optimal visibility in the surgical field, decreased blood loss, less vibration and noise, increased comfort for the patient, and protection of tooth structures. Therefore, the piezoelectric device was efficient in decreasing the short-term outcomes of pain and swelling although taking longer duration than conventional rotatory technique it significantly reduces the associated postoperative sequelae of third molar surgery. PMID:28713729

Cementoblastoma Relating to Right Mandibular Second Primary Molar

Directory of Open Access Journals (Sweden)

Sivakumar Nuvvula

2016-01-01

Full Text Available Cementoblastoma is a benign lesion of the odontogenic ectomesenchymal origin. It rarely occurs in primary dentition. This report describes a case of a cementoblastoma relating to the right mandibular second primary molar in a 7-year-old girl. Her panoramic radiograph revealed a well-defined radiopaque lesion with a radiolucent border extending from the distal surface of the mandibular right first primary molar to the distal surface of mandibular second primary molar. The tumor was attached to the mesial root of primary second molar and was excised along with the teeth involved and sent for histopathological evaluation, which showed irregular trabeculae of mineralized tissue interspersed with fibrovascular connective tissue, trabeculae of mineralized tissue with prominent reversal lines, and peripheral rimming of the mineralized tissue with blast cells. On a six-month follow-up, there has been no recurrence of the lesion.

[Inferior hemiarthroplasty of the temporo-mandibular joint with articulated condylar prosthesis type Stryker].

Science.gov (United States)

Bucur, A; Dincă, O; Totan, C; Ghită, V

2007-01-01

The optimal reconstruction of the mandible and of the temporo-mandibular joint after mandibular hemi-resection with disarticulation is still controversial in literature. This paperwork presents our experience on four cases in the reconstruction of the mandible together with the inferior arthroplasty of the temporo-mandibular joint, after the resection of extended benign tumors of the mandible, based on fibular free vascularized grafts having attached a Stryker titanium condylar prosthesis reconstructing the inferior segment of the temporo-mandibular joint. Our results for the this technique were excellent, with a functional rehabilitation very close to normal. After reviewing the various techniques and their arguments in literature, with accent on the TMJ reconstruction, we consider this method to be optimal for the reconstruction of mandibular defects in patients with neoplastic conditions.

Oral appliance therapy versus nasal continuous positive airway pressure in obstructive sleep apnea: a randomized, placebo-controlled trial on psychological distress

NARCIS (Netherlands)

Aarab, Ghizlane; Nikolopoulou, Maria; Ahlberg, Jari; Heymans, Martijn W.; Hamburger, Hans L.; de Lange, Jan; Lobbezoo, Frank

2017-01-01

The aim of this randomized placebo-controlled trail was to compare the effects of an objectively titrated mandibular advancement device (MAD) with those of nasal continuous positive airway pressure (nCPAP) and an intraoral placebo device on symptoms of psychological distress in OSA patients. In a

Mandibular Corpus Horizontal Distraction in an Edentulous Case and Its Effects on the Contralateral Coronoid Processus-Arcus Zygomaticus Relation

Directory of Open Access Journals (Sweden)

Furkan Erol Karabekmez

2014-05-01

Full Text Available PurposeInteraction between the coronoid processus and the arcus-zygomaticus on contralateral hemi-mandible often drops off the radar in case of distraction osteogenesis of the mandibular corpus. We presented a 42 years old male without any teeth applied to hospital for facial asymmetry, short hemi-mandible and chewing problems.Case2D and 3D computerized tomography and stereo-lithographic models were used for planning, predicting possible movements on the contralateral condyle and anticipate the relation of contralateral coronoid process the with zygomatic arc. Maximum safe amounts of distraction were calculated with cooperation with orthodontics and radiology. The rotation angle on the axis of the contralateral condyle is calculated in order to measure the defect to be corrected to take the maxillary and mandibular midlines to the same plane. Total calculated defect were shortened for preventing any interaction between the coronoid processus and the arcus-zygomaticus on contralateral hemi-mandible.ResultPatient was satisfied and started to use new dentures two months after removal of the distraction device.ConclusionIn order to achieve successful distraction without any problem regarding to opposite side rotation angles of the condyle, and position changes in the coronoid processus, collaboration and multidisciplinary approach are essential with orthodontics and radiologist in case of unilateral mandibular corpus distraction.

A multiple objective magnet sorting algorithm for the Advanced Light Source insertion devices

International Nuclear Information System (INIS)

Humphries, D.; Goetz, F.; Kownacki, P.; Marks, S.; Schlueter, R.

1995-01-01

Insertion devices for the Advanced Light Source (ALS) incorporate large numbers of permanent magnets which have a variety of magnetization orientation errors. These orientation errors can produce field errors which affect both the spectral brightness of the insertion devices and the storage ring electron beam dynamics. A perturbation study was carried out to quantify the effects of orientation errors acting in a hybrid magnetic structure. The results of this study were used to develop a multiple stage sorting algorithm which minimizes undesirable integrated field errors and essentially eliminates pole excitation errors. When applied to a measured magnet population for an existing insertion device, an order of magnitude reduction in integrated field errors was achieved while maintaining near zero pole excitation errors

Study of pulp chamber morphology of primary mandibular molars using spiral computed tomography.

Science.gov (United States)

Selvakumar, Haridoss; Kavitha, Swaminathan; Vijayakumar, Rajendran; Eapen, Thomas; Bharathan, Rajendran

2014-11-01

The purpose of this study was to evaluate the pulp chamber morphology in primary mandibular molars using spiral computed tomography (SCT). Sixty extracted primary mandibular molars were scanned using SCT for the (i) distance between the central fissure to furcation, (ii) distance between the central fissure to the floor of the pulp chamber, (iii) height of the pulp chamber (roof-floor), (iv) distance between the floor of the pulp chamber to the furcation. The mean and standard deviation was analyzed using statistical package for the social sciences (SPSS) program. The results of this study show that the average mean distance from the central fissure to the floor of the pulp chamber is 5.07 mm in first mandibular primary molar and 5.54 mm in second mandibular primary molar. It can be concluded that the greatest depth to which a bur can go during access opening without perforating the furcation in first primary mandibular molar is 5.07 mm and 5.54 mm in second primary mandibular molar.

Influence of mastication and edentulism on mandibular bone density.

Science.gov (United States)

Chou, Hsuan-Yu; Satpute, Devesh; Müftü, Ali; Mukundan, Srinivasan; Müftü, Sinan

2015-01-01

The aim of this study was to demonstrate that external loading due to daily activities, including mastication, speech and involuntary open-close cycles of the jaw contributes to the internal architecture of the mandible. A bone remodelling algorithm that regulates the bone density as a function of stress and loading cycles is incorporated into finite element analysis. A three-dimensional computational model is constructed on the basis of computerised tomography (CT) images of a human mandible. Masticatory muscle activation involved during clenching is modelled by static analysis using linear optimisation. Other loading conditions are approximated by imposing mandibular flexure. The simulations predict that mandibular bone density distribution results in a tubular structure similar to what is observed in the CT images. Such bone architecture is known to provide the bone optimum strength to resist bending and torsion during mastication while reducing the bone mass. The remodelling algorithm is used to simulate the influence of edentulism on mandibular bone loss. It is shown that depending on the location and number of missing teeth, up to one-third of the mandibular bone mass can be lost due to lack of adequate mechanical stimulation.

Does the titanium plate fixation of symphyseal fracture affect mandibular growth?

Science.gov (United States)

Bayram, Burak; Yilmaz, Alev Cetinsahin; Ersoz, Esra; Uckan, Sina

2012-11-01

The effect of metallic fixation on growth is a major concern in children and is not yet clear. The aim of this study was to evaluate the effect of metallic fixation of mandibular symphyseal fracture on mandibular growth.Eighteen 90-day-old growing white New Zealand rabbits weighing 1.6 to 2.5 kg were included in this study and divided into 2 groups of 9 subjects. In the experimental group, animals underwent mandibular osteotomy, simulating a symphyseal fracture on the midline of mandibular symphysis. The bone segments were fixed with microplates and microscrews (1.6 mm).In the control group, the same surgical incision without performing symphyseal osteotomy was conducted, and 2 screws were inserted on each side of the symphyseal midline.Digital cephalometric and submentovertex radiographs were taken before the operation and at postoperative 6 months for each animal in 2 groups, and cephalometric measurements were performed. The distance between the centers of the head of 2 screws measured at the end of surgery in the control group was compared with measurements at 6 months after surgery. Obtained data were statistically analyzed.There is no statistically significant difference between the 2 groups for growth amount of both sides of the mandible. Difference of ANS-Id (the most anterior points of nasal bone, the most anterior point on the alveolar bone between the lower incisors) and Cd-Id (the uppermost and most distal point of the mandibular condyle, the most anterior point on the alveolar bone between the lower incisors) values of the 2 groups is not statistically significant (P > 0.05).The distance between the 2 screws at the first application significantly increased at the postoperative sixth month (P mandibular symphyseal fracture does not affect the vertical and sagittal mandibular growth in growing rabbits.

Preliminary optical coherence tomography investigation of the temporo-mandibular joint disc

Science.gov (United States)

Mărcăuteanu, Corina; Demjan, Enikö; Sinescu, Cosmin; Negrutiu, Meda; Motoc, Adrian; Lighezan, Rodica; Vasile, Liliana; Hughes, Mike; Bradu, Adrian; Dobre, George; Podoleanu, Adrian G.

2010-02-01

Aim and objectives. The morphology and position of the temporo-mandibular disc are key issues in the diagnosis and treatment of arthrogenous temporo-mandibular disorders. Magnetic resonance imaging and arthroscopy are used today to identify: flattening of the pars posterior of the disc, perforation and/or adhesions in the pars intermedia of the disc and disc displacements. The present study proposes the investigation of the temporo-mandibular joint disc by optical coherence tomography (OCT). Material and methods. 8 human temporo-mandibular joint discs were harvested from dead subjects, under 40 year of age, and conserved in formalin. They had a normal morphology, with a thicker pars posterior (2,6 mm on the average) and a thinner pars intermedia (1mm on the average). We investigated the disc samples using two different OCT systems: an en-face OCT (time domain (TD)-OCT) system, working at 1300 nm (C-scan and B-scan mode) and a spectral OCT system (a Fourier domain (FD)-OCT) system , working at 840 nm (B-scan mode). Results. The OCT investigation of the temporo-mandibular joint discs revealed a homogeneous microstructure. The longer wavelength of the TD-OCT offers a higher penetration depth (2,5 mm in air), which is important for the analysis of the pars posterior, while the FD-OCT is much faster. Conclusions: OCT is a promising imaging method for the microstructural characterization of the temporo-mandibular disc.

Glenoid fossa position in Class II malocclusion associated with mandibular retrusion.

Science.gov (United States)

Giuntini, Veronica; De Toffol, Laura; Franchi, Lorenzo; Baccetti, Tiziano

2008-09-01

To assess the position of the glenoid fossa in subjects with Class II malocclusion associated with mandibular retrusion and normal mandibular size in the mixed dentition. A sample of 30 subjects (16 male, 14 female), age 9 years +/- 6 months, with skeletal and dental Class II malocclusion associated with mandibular retrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a matched group of 37 subjects (18 male, 19 female) with skeletal and dental Class I relationships. The comparisons between the Class II group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed by means of a nonparametric test for independent samples (Mann-Whitney U-test, P < .05). Subjects with Class II malocclusion presented with a significantly more distal position of the glenoid fossa, when compared with the control group as measured by means of three parameters (GF-S on FH, GF-Ptm on FH, and GF-FMN). A posteriorly displaced glenoid fossa is a possible diagnostic feature of Class II malocclusion associated with mandibular retrusion. An effective cephalometric measurement to evaluate glenoid fossa position is the distance from the glenoid fossa to the frontomaxillonasal suture (GF-FMN).

Mandibular Two Mini Implants Overdenture Using Magnetic Attachments: A Case Report

Directory of Open Access Journals (Sweden)

Anna Miyayasu

2017-12-01

Full Text Available Many patients with an edentulous mandible struggle to use complete dentures. The instability of such dentures caused by the lack of retention, often causes discomfort, as well as functional and psychosocial problems, which can be signifcantly improved using implant overdentures with retentive attachments. This case report describes a successful case of a mandibular implant overdenture using two mini implants and magnetic attachments for an elderly edentulous patient. Case Report: A 62-year-old female with a thin mandibular bone ridge presented with complaints of pain caused by an unstable and unretentive complete mandibular denture. This patient received two mini implants (diameter: 2.6 mm; length: 12 mm with magnetic attachments. After three months, magnetic assemblies with magnetic attraction of 400 gf were incorporated into the intaglio surface of her mandibular overdenture. At 11 months, magnetic attraction was changed from 400 gf to 600 gf to provide a stronger magnetic force for improving the retention of this denture. Conclusion: Based on a two-year follow-up period, the mandibular two mini implants overdenture with magnetic attachments was successful in improving the patient’s general satisfaction with her dentures

Signaling pathways regulating the expression of Prx1 and Prx2 in the Chick Mandibular Mesenchyme

Science.gov (United States)

Doufexi, Aikaterini-El; Mina, Mina

2009-01-01

Prx1 and Prx2 are members of the aristaless-related homeobox genes shown to play redundant but essential roles in morphogenesis of the mandibular processes. To gain insight into the signaling pathways that regulate expression of Prx genes in the mandibular mesenchyme, we used the chick as a model system. We examined the patterns of gene expression in the face and the roles of signals derived from the epithelium on the expression of Prx genes in the mandibular mesenchyme. Our results demonstrated stage-dependent roles of mandibular epithelium on the expression of Prx in the mandibular mesenchyme and provide evidence for positive roles of members of the fibroblast and hedgehog families derived from mandibular epithelium on the expression of Prx genes in the mandibular mesenchyme. Our studies suggest that endothelin-1 signaling derived from the mesenchyme is involved in restricting the expression of Prx2 to the medial mandibular mesenchyme. PMID:18942149

Evaluation of mandibular condyles in children with unilateral posterior crossbite.

Science.gov (United States)

Illipronti-Filho, Edson; Fantini, Solange Mongelli de; Chilvarquer, Israel

2015-01-01

The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB) has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT). Twenty CBCT images of 40 temporo mandibular joints (TMJs) in individuals in mixed dentition phase, which included 9 males (mean 7.9 years) and 11 females (mean 8.2 years), with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations.

Science.gov (United States)

Shapira, Yehoshua; Finkelstein, Tamar; Kadry, Rana; Schonberger, Shirley; Shpack, Nir

2016-01-01

Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

Preparation and Characterization of an Advanced Medical Device for Bone Regeneration

OpenAIRE

Dorati, Rossella; Colonna, Claudia; Genta, Ida; Bruni, Giovanna; Visai, Livia; Conti, Bice

2013-01-01

Tridimensional scaffolds can promote bone regeneration as a framework supporting the migration of cells from the surrounding tissue into the damaged tissue and as delivery systems for the controlled or prolonged release of cells, genes, and growth factors. The goal of the work was to obtain an advanced medical device for bone regeneration through coating a decellularized and deproteinized bone matrix of bovine origin with a biodegradable, biocompatible polymer, to improve the cell engraftment...

WE-DE-207A-03: Recent Advances in Devices Used in Neuro--Interventions

Energy Technology Data Exchange (ETDEWEB)

Gounis, M. [University of Massachusetts Medical School (United States)

2016-06-15

1. Parallels in the evolution of x-ray angiographic systems and devices used for minimally invasive endovascular therapy Charles Strother - DSA, invented by Dr. Charles Mistretta at UW-Madison, was the technology which enabled the development of minimally invasive endovascular procedures. As DSA became widely available and the potential benefits for accessing the cerebral vasculature from an endovascular approach began to be apparent, industry began efforts to develop tools for use in these procedures. Along with development of catheters, embolic materials, pushable coils and the GDC coils there was simultaneous development and improvement of 2D DSA image quality and the introduction of 3D DSA. Together, these advances resulted in an enormous expansion in the scope and numbers of minimally invasive endovascular procedures. The introduction of flat detectors for c-arm angiographic systems in 2002 provided the possibility of the angiographic suite becoming not just a location for vascular imaging where physiological assessments might also be performed. Over the last decade algorithmic and hardware advances have been sufficient to now realize this potential in clinical practice. The selection of patients for endovascular treatments is enhanced by this dual capability. Along with these advances has been a steady reduction in the radiation exposure required so that today, vascular and soft tissue images may be obtained with equal or in many cases less radiation exposure than is the case for comparable images obtained with multi-detector CT. Learning Objectives: To understand the full capabilities of today’s angiographic suite To understand how c-arm cone beam CT soft tissue imaging can be used for assessments of devices, blood flow and perfusion. Advances in real-time x-ray neuro-endovascular image guidance Stephen Rudin - Reacting to the demands on real-time image guidance for ever finer neurovascular interventions, great improvements in imaging chains are being

WE-DE-207A-03: Recent Advances in Devices Used in Neuro--Interventions

International Nuclear Information System (INIS)

Gounis, M.

2016-01-01

1. Parallels in the evolution of x-ray angiographic systems and devices used for minimally invasive endovascular therapy Charles Strother - DSA, invented by Dr. Charles Mistretta at UW-Madison, was the technology which enabled the development of minimally invasive endovascular procedures. As DSA became widely available and the potential benefits for accessing the cerebral vasculature from an endovascular approach began to be apparent, industry began efforts to develop tools for use in these procedures. Along with development of catheters, embolic materials, pushable coils and the GDC coils there was simultaneous development and improvement of 2D DSA image quality and the introduction of 3D DSA. Together, these advances resulted in an enormous expansion in the scope and numbers of minimally invasive endovascular procedures. The introduction of flat detectors for c-arm angiographic systems in 2002 provided the possibility of the angiographic suite becoming not just a location for vascular imaging where physiological assessments might also be performed. Over the last decade algorithmic and hardware advances have been sufficient to now realize this potential in clinical practice. The selection of patients for endovascular treatments is enhanced by this dual capability. Along with these advances has been a steady reduction in the radiation exposure required so that today, vascular and soft tissue images may be obtained with equal or in many cases less radiation exposure than is the case for comparable images obtained with multi-detector CT. Learning Objectives: To understand the full capabilities of today’s angiographic suite To understand how c-arm cone beam CT soft tissue imaging can be used for assessments of devices, blood flow and perfusion. Advances in real-time x-ray neuro-endovascular image guidance Stephen Rudin - Reacting to the demands on real-time image guidance for ever finer neurovascular interventions, great improvements in imaging chains are being

Assessment of the facial features and chin development of fetuses with use of serial three-dimensional sonography and the mandibular size monogram in a Chinese population.

Science.gov (United States)

Tsai, Meng-Yin; Lan, Kuo-Chung; Ou, Chia-Yo; Chen, Jen-Huang; Chang, Shiuh-Young; Hsu, Te-Yao

2004-02-01

Our purpose was to evaluate whether the application of serial three-dimensional (3D) sonography and the mandibular size monogram can allow observation of dynamic changes in facial features, as well as chin development in utero. The mandibular size monogram has been established through a cross-sectional study involving 183 fetal images. The serial changes of facial features and chin development are assessed in a cohort study involving 40 patients. The monogram reveals that the Biparietal distance (BPD)/Mandibular body length (MBL) ratio is gradually decreased with the advance of gestational age. The cohort study conducted with serial 3D sonography shows the same tendency. Both the images and the results of paired-samples t test (Pmonogram display disproportionate growth of the fetal head and chin that leads to changes in facial features in late gestation. This fact must be considered when we evaluate fetuses at risk for development of micrognathia.

Root canal morphology and variations of mandibular premolars by clearing technique: an in vitro study.

Science.gov (United States)

Parekh, Vaishali; Shah, Nimisha; Joshi, Hardik

2011-07-01

The aim of this study was to compare internal anatomy between first and second mandibular premolars and to study different percentage variations of root canal morphology of mandibular premolars in Gujarat population based on Vertucci's classification by clearing technique. A total of 80 extracted intact permanent mandibular premolars (40 each mandibular first premolar and mandibular second premolar) with fully formed apices were collected. Access cavity was prepared with endo access kit, all samples were placed in 2.5% sodium hypochlorite for 48 hours, after that all samples were washed in running water for 2 hours. After washing, all samples were transferred to 5% nitric acid, for decalcification, for 72 hours, with the acid being changed every 24 hours and stirred once every 8 hours. All samples were washed in running water and dehydrated using ascending grades (70%, 80%, 90% and 100%) of isopropyl alcohol for 2 days. Finally, they were rendered transparent by immersion in methyl salicylate for 15 minutes and then India ink dye was injected into the access cavity. The anatomy of the root canal was observed and classified based on the Vertucci's classification. Parametric Z-test was used to compare the variation between mandibular first and second premolars. In mandibular first premolar, type 1 was found in 20%, type 2 was 5%, type 3 was 5%, type 4 was 25%, type 5 was 12.5% and type 6 was 2.5% of total samples. Whereas, in mandibular second premolar, type 1 was found in 80% out of all samples, type 4 was 2.5%, type 5 was 17.5%. Type 2, type 3, type 6, type 7 and type 8 were not found in this study. Mandibular first premolar showed higher variation (75%) compared to mandibular second premolar (37.5%). The knowledge of variations in the root canal morphology of the mandibular premolars can enhance the level of endodontic treatment of mandibular premolars. Root canal morphology, Vertucci's classification, Clearing technique. How to cite this article: Parekh V, Shah N

Management of mandibular body fractures in pediatric patients: a case report with review of literature.

Science.gov (United States)

John, Baby; John, Reena R; Stalin, A; Elango, Indumathi

2010-10-01

Mandibular fractures are relatively less frequent in children when compared to adults, which may be due to the child's protected anatomic features and infrequent exposure of children to alcohol related traffic accidents. Treatment principles of mandibular fractures differ from that of adults due to concerns regarding mandibular growth and development of dentition. A case of a 4.5-year-old boy with fractured body of mandible managed by closed reduction using open occlusal acrylic splint and circum mandibular wiring is presented. This article also provides a review of literature regarding the management of mandibular body fracture in young children.

Management of mandibular body fractures in pediatric patients: A case report with review of literature

Directory of Open Access Journals (Sweden)

Baby John

2010-01-01

Full Text Available Mandibular fractures are relatively less frequent in children when compared to adults, which may be due to the child′s protected anatomic features and infrequent exposure of children to alcohol related traffic accidents. Treatment principles of mandibular fractures differ from that of adults due to concerns regarding mandibular growth and development of dentition. A case of a 4.5-year-old boy with fractured body of mandible managed by closed reduction using open occlusal acrylic splint and circum mandibular wiring is presented. This article also provides a review of literature regarding the management of mandibular body fracture in young children.

Advances in superconductivity: new materials, critical currents and devices

International Nuclear Information System (INIS)

Pinto, R.; Malik, S.K.; Grover, A.K.; Ayyub, P.

1997-01-01

The discovery of superconductivity in the cuprates produced an explosive growth in research, driven by the quest for higher and higher superconducting transition temperatures. In the initial stages, the excitement was tremendous both in the physical sciences and in engineering. However, the complexity of the new materials on the one hand, and the absence of a viable theory on the other, have made further developments much more difficult. It is to be expected therefore, that the early excitement and the subsequent rapid advances have paved the way for more systematic and detailed studies of all aspects of superconductivity. The International Symposium was intended to provide a forum to review the progress in selected areas in superconductivity. The emphasis was on experimental and theoretical studies of the new superconductors, advances in the theoretical understanding, progress in studies of flux pinning and vortex dynamics which affect critical currents, and developments of novel material synthesis methods. Recent developments in the twin areas of thin films and devices were extensively discussed during the symposium. Papers relevant to INIS are indexed separately

Conservative Management of Unilateral Fractures of the Mandibular Rami in Horses.

Science.gov (United States)

Jansson, Nicolai

2016-11-01

To report the outcome of conservative management of unilateral fractures of the mandibular rami in horses. Retrospective case series. 24 client-owned horses with unilateral mandibular fractures METHODS: Medical records (January 2000-January 2014) of horses with unilateral mandibular ramus fractures were retrieved. Only conservatively managed horses with follow-up information were included. Follow-up information on clinical outcome was retrieved from the medical records (n=11) or obtained by telephone interviews with the owners or trainers (n=13). Twenty-three horses (96%) returned to their previous or intended use and had no clinically evident masticatory or fracture healing-related problems at the time of follow-up. The owner of 1 horse (4%) reported it had tooth loosening, feed impaction, and masticatory problems. Conservative management of unilateral fractures of the mandibular rami is a treatment option in horses. © Copyright 2016 by The American College of Veterinary Surgeons.

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations

Directory of Open Access Journals (Sweden)

Yehoshua Shapira

2016-01-01

Full Text Available Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

Prolonged vertigo and ataxia after mandibular nerve block for treatment of trigeminal neuralgia

OpenAIRE

Arvind Chaturvedi; H H Dash

2011-01-01

Common complications of neurolytic mandibular nerve block are hypoesthesia, dysesthesia, and chemical neuritis. We report a rare complication, prolonged severe vertigo and ataxia, after neurolytic mandibular blockade in a patient suffering from trigeminal neuralgia. Coronoid approach was used for right sided mandibular block. After successful test injection with local anesthetic, absolute alcohol was given for neurolytic block. Immediately after alcohol injection, patient developed nausea and...

Recurrent simple bone cyst of the mandibular condyle: a case report

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung A; Koh, Kwang Joon [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, and Institute of Oral Bio Science, Chonbuk National University, Jeonju (Korea, Republic of)

2013-03-15

Cysts of the mandibular condyle are rare and can be difficult to diagnose and treat. Clinically, a simple bone cyst is asymptomatic and often discovered incidentally on routine radiographic examination. This report shows an atypical simple bone cyst occurring in the mandibular condyle showing recurrence after surgical curettage. Radiologically, this lesion involving the mandibular condyle should be distinguished from other similar lesions such as a chondriome, a central giant cell granuloma, and an aneurysmal bone cyst. Radiographic assessment was useful for forecasting the prognosis of a simple bone cyst. Possible reasons for the recurrence were discussed radiographically.

Evaluation of mandibular condyles in children with unilateral posterior crossbite

Directory of Open Access Journals (Sweden)

Edson ILLIPRONTI-FILHO

2015-01-01

Full Text Available The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT. Twenty CBCT images of 40 temporo mandibular joints (TMJs in individuals in mixed dentition phase, which included 9 males (mean 7.9 years and 11 females (mean 8.2 years, with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (< 40 mm, congenital or genetic anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Feasibility of purely endoscopic intramedullary fixation of mandibular condyle fractures.

Science.gov (United States)

Frake, Paul C; Goodman, Joseph F; Joshi, Arjun S

2015-01-01

The investigators of this study hypothesized that fractures of the mandibular condyle can be repaired using short-segment intramedullary implants and purely endoscopic surgical technique, using a basic science, human cadaver model in an academic center. Endoscopic instrumentation was used through a transoral mucosal incision to place intramedullary implants of 2 cm in length into osteotomized mandibular condyles. The surgical maneuvers that required to insert these implants, including condyle positioning, reaming, implant insertion, and seating of the mandibular ramus, are described herein. Primary outcome was considered as successful completion of the procedure. Ten cadaveric mandibular condyles were successfully repaired with rigid intramedullary internal fixation without the use of external incisions. Both insertion of a peg-type implant and screwing a threaded implant into the condylar head were possible. The inferior portion of the implant remained exposed, and the ramus of the mandible was manipulated into position on the implant using retraction at the sigmoid notch. The results of this study suggest that purely endoscopic repair of fractures of the mandibular condyle is possible by using short-segment intramedullary titanium implants and a transoral endoscopic approach without the need for facial incisions or punctures. The biomechanical advantages of these intramedullary implants, including improved strength and resistance to mechanical failure compared with miniplates, have been recently established. The combination of improved implant design and purely endoscopic technique may allow for improved fixation and reduced surgical- and implant-related morbidity in the treatment of condylar fractures.

Mandibular lateral incisor with four root canals: A unique case of double tooth diagnosed using multidetector computed tomography

International Nuclear Information System (INIS)

Gupta, Sunil Kumar; Acharya, Shashi Rashmi; Ather, Amber; Gupta, Jaya

2013-01-01

Double tooth is a dental anomaly consequent to fusion of two or more teeth or gemination of a single tooth. This report describes a unique case of double tooth in relation to a mandibular lateral incisor exhibiting the presence of four root canals. The role of conventional radiography and advanced three-dimensional imaging techniques in the better assessment of complex root canal systems and their aid in endodontic management has also been highlighted.

NATO Advanced Study Institute on Nondestructive Evaluation of Semiconductor Materials and Devices

CERN Document Server

1979-01-01

From September 19-29, a NATO Advanced Study Institute on Non­ destructive Evaluation of Semiconductor Materials and Devices was held at the Villa Tuscolano in Frascati, Italy. A total of 80 attendees and lecturers participated in the program which covered many of the important topics in this field. The subject matter was divided to emphasize the following different types of problems: electrical measurements; acoustic measurements; scanning techniques; optical methods; backscatter methods; x-ray observations; accele­ rated life tests. It would be difficult to give a full discussion of such an Institute without going through the major points of each speaker. Clearly this is the proper task of the eventual readers of these Proceedings. Instead, it would be preferable to stress some general issues. What came through very clearly is that the measurements of the basic scientists in materials and device phenomena are of sub­ stantial immediate concern to the device technologies and end users.

Intraoral Approach and Stereolithographic-guided Large Mandibular Reconstruction with Fibula Free Flap

Directory of Open Access Journals (Sweden)

Artur Diaz-Carandell, MD

2014-08-01

Full Text Available Summary: The reconstruction of mandibular defects has always been of great concern, and it still represents a challenge for head-and-neck reconstructive surgeons. The mandible plays a major role in mastication, articulation, swallowing, respiration, and facial contour. Thus, when undertaking mandibular reconstruction, restoration of both function and cosmetics should be considered as the measure of success. Microsurgical reconstruction is the gold-standard method to repair a segmental mandibular defect. Reconstruction of sizeable defects often needs a large neck incision, leading to unsatisfactory cosmetic outcomes. Virtual surgical planning and stereolithographic modeling are new techniques that offer excellent results and can provide precise data for mandibular reconstruction and improve postoperative outcomes. We present a case of complete intraoral resection and reconstruction of a large ameloblastoma of the mandible.

Epidemiology and treatment outcome of surgically treated mandibular condyle fractures. A five years retrospective study.

Science.gov (United States)

Zrounba, Hugues; Lutz, Jean-Christophe; Zink, Simone; Wilk, Astrid

2014-09-01

Surgical management of mandibular condyle fractures is still controversial. Although it provides better outcome than closed treatment questions still remain about the surgical approach and the osteosynthesis devices to be used. Between 2005 and 2010, we managed 168 mandibular condyle fractures with open treatment. Two surgical approaches were used in this study, a pre-auricular and a high submandibular approach (one or the other or as a combined approach). Internal fixation was performed using TCP(®) plates (Medartis, Basel, Switzerland) or with two lag screws (15 and 17 mm). Delta plates were used in 15 cases (8.9%). We report the epidemiology of these fractures and the outcomes of the surgical treatment. We assessed the complications related to the surgical procedure and those related to the osteosynthesis material. The facial nerve related complication rate was very low and the osteosynthesis materials used proved to be strong enough to realize a stable fixation. The two approaches used in this study appeared to be safe with good aesthetic results. Most of the surgical procedure failures occurred in high subcondylar fractures especially when bilateral. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Orthognathic Surgery Patients (Maxillary Impaction and Setback plus Mandibular Advancement plus Genioplasty) Need More Intensive Care Unit (ICU) Admission after Surgery

Science.gov (United States)

Eftekharian, Hamidreza; Zamiri, Barbad; Ahzan, Shamseddin; Talebi, Mohamad; Zarei, Kamal

2015-01-01

Statement of the Problem: Due to shortage of ICU beds in hospitals, knowing what kind of orthognathic surgery patients more need ICU care after surgery would be important for surgeons and hospitals to prevent unnecessary ICU bed reservation. Purpose: The aim of the present study was to determine what kinds of orthognathic surgery patients would benefit more from ICU care after surgery. Materials and Method: 210 patients who were admitted to Chamran Hospital, Shiraz, for bimaxillary orthognathic surgery (2008-2013) were reviewed based on whether they had been admitted to ICU or maxillofacial surgery ward. Operation time, sex, intraoperative Estimated Blood Loss (EBL), postoperative complications, ICU admission, and unwanted complications resulting from staying in ICU were assessed. Results: Of 210 patients undergoing bimaxillary orthognathic surgery, 59 patients (28.1%) were postoperatively admitted to the ICU and 151 in the maxillofacial ward (71.9%). There was not statistically significant difference in age and sex between the two groups (p> 0.05). The groups were significantly different in terms of operation time (pOrthognathic surgery patients (maxillary impaction and setback plus mandibular advancement plus genioplasty) due to more intraoperative bleeding and postoperative nausea and pain would benefit from ICU admission after surgery. PMID:26106634

Kinematic Modeling of Normal Voluntary Mandibular Opening and Closing Velocity-Initial Study.

Science.gov (United States)

Gawriołek, Krzysztof; Gawriołek, Maria; Komosa, Marek; Piotrowski, Paweł R; Azer, Shereen S

2015-06-01

Determination and quantification of voluntary mandibular velocity movement has not been a thoroughly studied parameter of masticatory movement. This study attempted to objectively define kinematics of mandibular movement based on numerical (digital) analysis of the relations and interactions of velocity diagram records in healthy female individuals. Using a computerized mandibular scanner (K7 Evaluation Software), 72 diagrams of voluntary mandibular velocity movements (36 for opening, 36 for closing) for women with clinically normal motor and functional activities of the masticatory system were recorded. Multiple measurements were analyzed focusing on the curve for maximum velocity records. For each movement, the loop of temporary velocities was determined. The diagram was then entered into AutoCad calculation software where movement analysis was performed. The real maximum velocity values on opening (Vmax ), closing (V0 ), and average velocity values (Vav ) as well as movement accelerations (a) were recorded. Additionally, functional (A1-A2) and geometric (P1-P4) analysis of loop constituent phases were performed, and the relations between the obtained areas were defined. Velocity means and correlation coefficient values for various velocity phases were calculated. The Wilcoxon test produced the following maximum and average velocity results: Vmax = 394 ± 102, Vav = 222 ± 61 for opening, and Vmax = 409 ± 94, Vav = 225 ± 55 mm/s for closing. Both mandibular movement range and velocity change showed significant variability achieving the highest velocity in P2 phase. Voluntary mandibular velocity presents significant variations between healthy individuals. Maximum velocity is obtained when incisal separation is between 12.8 and 13.5 mm. An improved understanding of the patterns of normal mandibular movements may provide an invaluable diagnostic aid to pathological changes within the masticatory system. © 2014 by the American College of Prosthodontists.

Unusal canal configuration in maxillary and mandibular second molars

Directory of Open Access Journals (Sweden)

Ramachandran Ragunathan

2016-01-01

Full Text Available This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual.

Root and Canal Morphology of Mandibular Third Molars in an Iranian Population

Directory of Open Access Journals (Sweden)

Maryam Kuzekanani

2012-06-01

Full Text Available Background and aims. A through knowledge of the root canal morphology is required for successful endodontic therapy. The aim of this study was to investigate the root and canal morphology of mandibular third molars in Kerman, a province in southeast of Iran. Materials and methods. One-hundred-fifty extracted mandibular third molars were collected randomly from different dental clinics in Kerman. The root canal anatomy and morphology of each tooth was carefully studied using a clearing technique. Root number and morphology, number of canals per root, root canal configuration according to Vertucci classification, and incidence of dilacerated roots and C-shaped canals in mandibular third molars were evaluated under stereomicroscope with ×2 to ×3 magnifications. Results. From the total of 150 mandibular third molars studied, 21% had one root. The majority of teeth (73% had two roots. 5.5% of the teeth had three roots. The incidence of C-shaped canal was 3.5% in this study and 8% of the teeth had at least one dilacerated root. Conclusion. Although root canal anatomy and morphology of mandibular third molars is very variable having two roots seems to be the normal anatomy for these teeth.

Superolateral dislocation of an intact mandibular condyle into the temporal fossa: case report and literature review.

Science.gov (United States)

Sharma, Divashree; Khasgiwala, Ankit; Maheshwari, Bharat; Singh, Charanpreet; Shakya, Neelam

2017-02-01

Temporomandibular joint dislocation refers to the dislodgement of mandibular condyle from the glenoid fossa. Anterior and anteromedial dislocations of the mandibular condyle are frequently reported in the literature, but superolateral dislocation is a rare presentation. This report outlines a case of superolateral dislocation of an intact mandibular condyle that occurred in conjunction with an ipsilateral mandibular parasymphysis fracture. A review of the clinical features of superolateral dislocation of the mandibular condyle and the possible techniques of its reduction ranging from the most conservative means to extensive surgical interventions is presented. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The application of the Risdon approach for mandibular condyle fractures.

Science.gov (United States)

Nam, Seung Min; Lee, Jang Hyun; Kim, Jun Hyuk

2013-07-06

Many novel approaches to mandibular condyle fracture have been reported, but there is a relative lack of reports on the Risdon approach. In this study, the feasibility of the Risdon approach for condylar neck and subcondylar fractures of the mandible is demonstrated. A review of patients with mandibular condylar neck and subcondylar fractures was performed from March 2008 to June 2012. A total of 25 patients, 19 males and 6 females, had 14 condylar neck fractures and 11 subcondylar fractures. All of the cases were reduced using the Risdon approach. For subcondylar fractures, reduction and fixation with plates was done under direct vision. For condylar neck fractures, reduction and fixation was done with the aid of a trochar in adults and a percutaneous threaded Kirschner wire in children. There were no malunions or nonunions revealed in follow-up care. Mild transient neuropraxia of the marginal mandibular nerve was seen in 4 patients, which was resolved within 1-2 months. The Risdon approach is a technique for reducing the condylar neck and subcondylar fractures that is easy to perform and easy to learn. Its value in the reduction of mandibular condyle fractures should be emphasized.

[Longitudinal genetic effects on mandibular position of female twins from six to twelve years old].

Science.gov (United States)

Zhu, Chang-feng; Peng, Jing

2013-06-01

To find the longitudinal genetic effects on mandibular position in mixed dentition. The sample used in this study consisted of lateral cephalograms of eighty-nine pairs of female twins in Beijing. With a mixed longitudinal method, the effective twins were 183 pairs(monozygous 110 pairs and dizygous 73 ones). The genetic and environmental effects on mandibular position were analyzed by statistical methods in female twins from six to twelve years old. Statistical comparisons revealed significant (Pchin is the most subjective to environment change, then the mandibular angle, and the condyle is the least. Using N and S as references, the environmental influence on heights showed different order from the most to least changeable: The mandibular angle, the condyle and the chin. In later stage of our observation, the mandibular morphology and growth type might be family inherited. For environmental influences plays important roles on mandibular position, these findings can be used in orthodontic treatment planning.

The visibility of mandibular canal on orthoradial and oblique CBCT slices at molar implant sites

International Nuclear Information System (INIS)

Alkhader, Mustafa; Jarab, Fadi; Shaweesh, Ashraf; Hudieb, Malik

2016-01-01

The aim of the present study was to compare visibility of the mandibular canal on cone beam computed tomography (CBCT)-based orthoradial and oblique slices at molar implant sites. CBCT images for 132 mandibular molar implant sites were selected for the study. After generating orthoradial and oblique slices, two observers evaluated the visibility of the mandibular canal using three-point scoring scale (1-3, good to excellent). Wilcoxon signed-rank test compared the visibility scores of the two slices. Both orthoradial and oblique slices obtained from CBCT had only very good to excellent mandibular canal visibility scores. At 114 mandibular molar implant sites, the visibility score was equal on both orthoradial and oblique slices. Although the visibility score was higher on orthoradial slices for 12 implant sites, the visibility score was higher for six implant sites on oblique slices and the difference was not significant. Therefore, the visibility of the mandibular canal was excellent and comparable on most of orthoradial and oblique slices obtained from CBCT images

Advances in neuromorphic hardware exploiting emerging nanoscale devices

CERN Document Server

2017-01-01

This book covers all major aspects of cutting-edge research in the field of neuromorphic hardware engineering involving emerging nanoscale devices. Special emphasis is given to leading works in hybrid low-power CMOS-Nanodevice design. The book offers readers a bidirectional (top-down and bottom-up) perspective on designing efficient bio-inspired hardware. At the nanodevice level, it focuses on various flavors of emerging resistive memory (RRAM) technology. At the algorithm level, it addresses optimized implementations of supervised and stochastic learning paradigms such as: spike-time-dependent plasticity (STDP), long-term potentiation (LTP), long-term depression (LTD), extreme learning machines (ELM) and early adoptions of restricted Boltzmann machines (RBM) to name a few. The contributions discuss system-level power/energy/parasitic trade-offs, and complex real-world applications. The book is suited for both advanced researchers and students interested in the field.

Meta-analysis of skeletal mandibular changes during Frankel appliance treatment.

Science.gov (United States)

Perillo, Letizia; Cannavale, Rosangela; Ferro, Fabrizia; Franchi, Lorenzo; Masucci, Caterina; Chiodini, Paolo; Baccetti, Tiziano

2011-02-01

The purpose of this study was to perform a meta-analysis of articles to verify the mandibular changes produced by the Fränkel-2 (FR-2) appliance during the treatment of growing patients with Class II malocclusions when compared with untreated growing Class II subjects. The literature published from January 1966 to January 2009 was reviewed with search engines. A quality analysis was performed. The effects on primary end points were calculated with random-effect models. Heterogeneity was assessed using Q statistic and investigated using study-level meta-regression. A total of nine articles were identified. The quality of the studies ranged from low to medium. Meta-analysis showed that the FR-2 was associated with enhancement of mandibular body length [0.4 mm/year 95 per cent confidence interval (CI) 0.182-0.618], total mandibular length (1.069 mm/year, 95 per cent CI 0.683-1.455), and mandibular ramus height (0.654 mm/year, 95 per cent CI 0.244-1.064). A consistent heterogeneity among studies was found for all the considered linear measurements. The FR-2 appliance had a statistically significant effect on mandibular growth. Nevertheless, the heterogeneity of the FR-2 effects, the quality of studies, the differences in age, skeletal age, treatment duration, and the inconsistent initial diagnosis seem to overstate the benefits of the FR-2 appliance. An evidence-based approach to the orthodontic outcomes of FR-2 appliance is needed, by selecting and comparing groups of children with the same cephalometric characteristics with and without treatment.

Changes in the edentulous maxilla in persons wearing implant-retained mandibular overdentures

NARCIS (Netherlands)

Narhi, TO; Geertman, ME; Hevinga, M; Abdo, H; Kalk, W

Statement of problem. It has been suggested that risk for severe resorption in the anterior maxilla is increased in persons wearing mandibular implant-retained overdentures. However, little information is available about the changes in the edentulous maxilla after mandibular implant treatment.

Computer-assisted preoperative simulation for positioning and fixation of plate in 2-stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery

Directory of Open Access Journals (Sweden)

Hideyuki Suenaga

2016-01-01

Conclusion: The implementation of the computer-assisted preoperative simulation for the positioning and fixation of plate in 2-stage orthognathic procedure using distraction technique and mandibular setback surgery yielded good results.

Radiation-resistant requirements analysis of device and control component for advanced spent fuel management process

Energy Technology Data Exchange (ETDEWEB)

Song, Tai Gil; Park, G. Y.; Kim, S. Y.; Lee, J. Y.; Kim, S. H.; Yoon, J. S. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-02-01

It is known that high levels of radiation can cause significant damage by altering the properties of materials. A practical understanding of the effects of radiation - how radiation affects various types of materials and components - is required to design equipment to operate reliably in a gamma radiation environment. When designing equipment to operate in a high gamma radiation environment, such as will be present in a nuclear spent fuel handling facility, several important steps should be followed. In order to active test of the advanced spent fuel management process, the radiation-resistant analysis of the device and control component for active test which is concerned about the radiation environment is conducted. Also the system design process is analysis and reviewed. In the foreign literature, 'threshold' values are generally reported. the threshold values are normally the dose required to begin degradation in a particular material property. The radiation effect analysis for the device of vol-oxidation and metalization, which are main device for the advanced spent fuel management process, is performed by the SCALE 4.4 code. 5 refs., 4 figs., 13 tabs. (Author)

Clinical and orthopantomographic evaluation of mandibular third molar

Directory of Open Access Journals (Sweden)

F K Saraswati

2010-01-01

Full Text Available Objective: To evaluate sensitivity of orthopentograph (OPG in assessing the number and morphology of roots of the mandibular third molar. Materials and Methods : The study population consisted of 100 ILTMs (impacted lower third molars ranging from 18 to 42 years with equal sex distribution. All the teeth were subsequently extracted , collected and compared with OPG features for position, numb,er, morphology, and relation to mandibular canal. Conclusion: In conclusion, a large sample study is suggested with techniques like Clark′s and right angle technique which determines the three-dimensional orientation of the impacted teeth.

A randomized clinical trial comparing mandibular incisor proclination produced by fixed labial appliances and clear aligners.

Science.gov (United States)

Hennessy, Joe; Garvey, Thérèse; Al-Awadhi, Ebrahim A

2016-09-01

To compare the mandibular incisor proclination produced by fixed labial appliances and third generation clear aligners. Patients underwent a course of orthodontic treatment using either fixed labial appliances or clear aligners (Invisalign). Mandibular incisor proclination was measured by comparing pretreatment and near-end treatment lateral cephalograms. Eligibility criteria included adult patients with mild mandibular incisor crowding (clear aligner group. Baseline characteristics were similar for both groups: Fixed appliance mean crowding was 2.1 ± 1.3 mm vs clear aligner mean crowding, 2.5 ± 1.3 mm; pretreatment mean mandibular incisor inclination for the fixed appliance group was 90.8 ± 5.4° vs 91.6 ± 6.4° for the clear aligner group. Fixed appliances produced 5.3 ± 4.3° of mandibular incisor proclination. Clear aligners proclined the mandibular incisors by 3.4 ± 3.2°. The difference between the two groups was not statistically significant (P > .05). There was no difference in the amount of mandibular incisor proclination produced by clear aligners and fixed labial appliances in mild crowding cases.

Early Experience with Biodegradable Fixation of Pediatric Mandibular Fractures

OpenAIRE

Mazeed, Ahmed Salah; Shoeib, Mohammed Abdel-Raheem; Saied, Samia Mohammed Ahmed; Elsherbiny, Ahmed

2014-01-01

This clinical study aims to evaluate the stability and efficiency of biodegradable self-reinforced poly-l/dl-lactide (SR-PLDLA) plates and screws for fixation of pediatric mandibular fractures. The study included 12 patients (3–12 years old) with 14 mandibular fractures. They were treated by open reduction and internal fixation by SR-PLDLA plates and screws. Maxillomandibular fixation was maintained for 1 week postoperatively. Clinical follow-up was performed at 1 week, 6 weeks, 3 months, and...

Mandibular Fracture Patterns at a Medical Center in Central Taiwan: A 3-Year Epidemiological Review.

Science.gov (United States)

Lin, Fu-Yu; Wu, Chao-I; Cheng, Hsu-Tang

2017-12-01

Mandibular fractures constitute a major portion of maxillofacial trauma and may lead to considerable functional and aesthetic sequelae if treatment is inadequate or delayed. An epidemiology study on mandibular fractures may guide the preventive efforts of the Taiwan public health care system. Therefore, a retrospective review was conducted at a medical center in central Taiwan to evaluate the current mandibular fracture epidemiology.The medical records and digitized radiographs of 198 patients who received treatment for mandibular fractures during a 3-year period (from October 2010 to September 2013) at a medical center in central Taiwan were reviewed to obtain demographic and injury data.The average age was 29.4 years (3-82 years). Patients aged 21 to 30 years sustained the most mandibular fractures (62 patients, 31.3%). The overall sex distribution (male to female) ratio was 1.8. Motor-vehicle accidents (MVAs) were the most common mechanism of injury (162 patients, 82%), and scooter and motorcycle riders wearing partial-coverage helmets constituted the majority of patients. A chart review identified 198 patients with 335 mandibular fractures; 113 patients (57.1%) had multiple mandibular fractures. The most common fracture sites were the symphysis and parasymphysis regions (38.9%), followed by the condyle (26.0%), angle (14.3%), body (14.3%), and ramus (6.6%).MVAs are the major cause of mandibular fractures in central Taiwan, and patients aged Taiwan. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

Surgical Management of Mandibular Central Incisors with Dumbbell Shaped Periapical Lesion: A Case Report

Directory of Open Access Journals (Sweden)

Roopadevi Garlapati

2014-01-01

Full Text Available Dental traumatic injuries may affect the teeth and alveolar bone directly or indirectly. Pulpal necrosis and chronic and apical periodontitis with cystic changes are the most common sequelae of the dental traumatic injuries, if the teeth are not treated immediately. This case report focuses on the conventional and surgical management of mandibular central incisors. A twenty-four-year-old male patient presented with pain in the mandibular central incisors. Radiographic examination revealed mandibular central incisors with dumbbell shaped periapical lesion. After root canal treatment, parendodontic surgery was performed for mandibular central incisors. After one-year recall examination, the teeth were asymptomatic and periapical lesion had healed.

Alveolar ridge expansion-assisted orthodontic space closure in the mandibular posterior region.

Science.gov (United States)

Ozer, Mete; Akdeniz, Berat Serdar; Sumer, Mahmut

2013-12-01

Orthodontic closure of old, edentulous spaces in the mandibular posterior region is a major challenge. In this report, we describe a method of orthodontic closure of edentulous spaces in the mandibular posterior region accelerated by piezoelectric decortication and alveolar ridge expansion. Combined piezosurgical and orthodontic treatments were used to close 14- and 15-mm-wide spaces in the mandibular left and right posterior areas, respectively, of a female patient, aged 18 years and 9 months, diagnosed with skeletal Class III malocclusion, hypodontia, and polydiastemas. After the piezoelectric decortication, segmental and full-arch mechanics were applied in the orthodontic phase. Despite some extent of root resorption and anchorage loss, the edentulous spaces were closed, and adequate function and esthetics were regained without further restorative treatment. Alveolar ridge expansion-assisted orthodontic space closure seems to be an effective and relatively less-invasive treatment alternative for edentulous spaces in the mandibular posterior region.

Design, Fabrication, and Characterization of Carbon Nanotube Field Emission Devices for Advanced Applications

Science.gov (United States)

Radauscher, Erich Justin

Carbon nanotubes (CNTs) have recently emerged as promising candidates for electron field emission (FE) cathodes in integrated FE devices. These nanostructured carbon materials possess exceptional properties and their synthesis can be thoroughly controlled. Their integration into advanced electronic devices, including not only FE cathodes, but sensors, energy storage devices, and circuit components, has seen rapid growth in recent years. The results of the studies presented here demonstrate that the CNT field emitter is an excellent candidate for next generation vacuum microelectronics and related electron emission devices in several advanced applications. The work presented in this study addresses determining factors that currently confine the performance and application of CNT-FE devices. Characterization studies and improvements to the FE properties of CNTs, along with Micro-Electro-Mechanical Systems (MEMS) design and fabrication, were utilized in achieving these goals. Important performance limiting parameters, including emitter lifetime and failure from poor substrate adhesion, are examined. The compatibility and integration of CNT emitters with the governing MEMS substrate (i.e., polycrystalline silicon), and its impact on these performance limiting parameters, are reported. CNT growth mechanisms and kinetics were investigated and compared to silicon (100) to improve the design of CNT emitter integrated MEMS based electronic devices, specifically in vacuum microelectronic device (VMD) applications. Improved growth allowed for design and development of novel cold-cathode FE devices utilizing CNT field emitters. A chemical ionization (CI) source based on a CNT-FE electron source was developed and evaluated in a commercial desktop mass spectrometer for explosives trace detection. This work demonstrated the first reported use of a CNT-based ion source capable of collecting CI mass spectra. The CNT-FE source demonstrated low power requirements, pulsing

Mandibular condylar morphology for bruxers with different grinding patterns.

Science.gov (United States)

Tao, Jianxiang; Wu, Junhua; Zhang, Xuying

2016-07-01

The purpose of this study was to investigate the mandibular condylar morphology for bruxers with different grinding patterns. Condylar sectional morphology and condylar position of 30 subjects were determined by two viewers using cone beam computed tomography (CBCT) image data sets. The grinding patterns during sleep bruxism (SB) were determined objectively using a Brux-checker device.Chi-square tests were used for statistical analysis for the condylar morphology type between different tooth grinding patterns. Spearman's rank correlation coefficient was used for correlation analysis between condylar position and the canine guidance area during SB. Theincidence of condylarmorphologicaldivergence from idealwas35%.There isa significant difference in distribution of condylar morphology type between the group grinding (GG) and GG combined with mediotrusive side grinding (MG) (p < 0.05). There was no significant correlation between condylar position and canine guidance area during bruxism. MG during SB is associated with condylar morphology that is considered not to be ideal.

Prevalence of three rooted permanent mandibular first molars in Haryana (North Indian population

Directory of Open Access Journals (Sweden)

Alpa Gupta

2017-01-01

Full Text Available Background: Mandibular first molars typically have two roots but sometimes a supernumerary root presents distolingually called as radix entomolaris (RE. Aim: The present study evaluated the prevalence of permanent mandibular first molars featuring a distolingual root in Haryana (North India. Materials and Methods: Five hundred patients possessing bilateral mandibular first molars were selected for this study. The intraoral periapical radiographs were taken. The radiographs of these patients were evaluated under optimal conditions. A total of 1000 mandibular first molars were screened, and the incidence of three-rooted mandibular first molars, RE and the correlation between left and right side occurrence and between either gender were recorded. Statistical Analysis: The binary logistic regression test and Pearson's Chi-square test were used for statistical analysis. Results: The prevalence of three-rooted permanent mandibular first molars was 13% of the patients examined and 8.3% of the teeth examined. There was no statistically significant difference between gender and side of occurrence (P ≥ 0.05. The bilateral incidence of a symmetric distribution was 27.6 (18/65 among the RE teeth examined. Conclusion: RE is considered as an Asiatic trait. The occurrence of this macrostructure in the Haryana (North India population was found to be 13%. The clinician must thoroughly examine the radiographs before the initiation of endodontic therapy.

Root Canal Configuration of Mandibular First and Second Premolars in an Iranian Population

Directory of Open Access Journals (Sweden)

Nemat Eskandarzadeh

2007-08-01

Full Text Available

Background and aims. It is critical to have a proper knowledge of the normal anatomy of the pulp and its variations for the success of endodontic treatment. The aim of this study was to determine the canal configuration and the prevalence of C-shaped canals in mandibular first and second premolars in a North-Western Iranian population.

Materials and methods. A total of 163 extracted mandibular first and 103 mandibular second premolars were injected with India ink and demineralized . They were made clear and transparent with methyl salicylate and the anatomy of their canal(s was studied.

Results. The results showed that 98% of mandibular first premolars had one root, 2% had two roots, 70.6% had one canal, 27.8% had two canals, 1.2% had three canals and the prevalence of C-shaped canals was 2.4%. All mandibular second premolars had one root, 80.5% had one canal, 17.5% had two canals and the prevalence of C-shaped canals was 2%.

Conclusion. It is important that clinicians, before treatment of mandibular first and second premolars, pay complete attention to radiographs, have a true concept of the number of root(s and canal(s, and prepare a correct access cavitiy.

[Diagnosis and treatment of temporo-mandibular disorders in orthodontics].

Science.gov (United States)

Bocquet, Emmanuelle; Moreau, Alexis; Danguy, Michel; Danguy, Chantal

2010-03-01

Orthodontists are fully prepared to treat the problems of occlusion that they are called upon to deal with every day. On the other hand temporo-mandibular joint disorders present more obscure difficulties from the point of view of detection and diagnosis as well the management of their treatment. That is why a profound understanding of the anatomical and physiological functioning of the temporo-mandibular joint has become indispensable for today's orthodontists who are now asked to detect and diagnose an assortment of TMJ disturbances whose etiology may vary greatly. By performing a rigorous diagnostic procedure, based on a thorough clinical examination supported by careful axiographic and radiological studies, of temporo-mandibular malfunctioning and its underlying etiological causes, which are primarily dento-alveolar and occlusal in nature, orthodontists will be able to adopt an appropriate therapeutic approach that might be purely orthodontic or multi-disciplinary and carried out with the collaboration of specialists in occlusion, oral surgery, and even osteopathy. EDP Sciences, SFODF, 2010.

Recurrent osteochondroma of the mandibular condyle: A case report

International Nuclear Information System (INIS)

Kwon, Young Eun; Choi, Karp Shik; An, Chang Hyeon; Choi, So Young; An, Seo Young; Lee, Jae Seo

2017-01-01

A 21-year-old woman presented with facial asymmetry. Crepitus and clicking of the temporomandibular joint were noted. The midline deviated 5.5 mm to the left, and secondary malocclusion was observed. Panoramic and cone-beam computed tomographic images showed an irregular and exophytic bony mass on the anteromedial surface of the right mandibular condyle. A 3-phase bone scan revealed increased tracer uptake on the affected side. The lesion was treated with excision and reshaping under the diagnosis of osteochondroma confirmed by a histopathological examination. The lesion recurred after 3 years, and the patient underwent condylectomy. Mandibular condylar osteochondroma is often resected because it causes functional and aesthetic problems, but it rarely recurs. To the best of our knowledge, only 2 cases of recurrent osteochondromas of the mandibular condyle have been reported previously. Surgical treatment of the osteochondroma should be performed considering the possibility of recurrence, and long-term follow-up is recommended

Early Experience with Biodegradable Fixation of Pediatric Mandibular Fractures.

Science.gov (United States)

Mazeed, Ahmed Salah; Shoeib, Mohammed Abdel-Raheem; Saied, Samia Mohammed Ahmed; Elsherbiny, Ahmed

2015-09-01

This clinical study aims to evaluate the stability and efficiency of biodegradable self-reinforced poly-l/dl-lactide (SR-PLDLA) plates and screws for fixation of pediatric mandibular fractures. The study included 12 patients (3-12 years old) with 14 mandibular fractures. They were treated by open reduction and internal fixation by SR-PLDLA plates and screws. Maxillomandibular fixation was maintained for 1 week postoperatively. Clinical follow-up was performed at 1 week, 6 weeks, 3 months, and 12 months postoperatively. Radiographs were done at 1 week, 3 months, and 12 months postoperatively to observe any displacement and fracture healing. All fractures healed both clinically and radiologically. No serious complications were reported in the patients. Normal occlusion was achieved in all cases. Biodegradable osteofixation of mandibular fractures offers a valuable clinical solution for pediatric patients getting the benefit of avoiding secondary surgery to remove plates, decreasing the hospital stay, further painful procedures, and psychological impact.

Recurrent osteochondroma of the mandibular condyle: A case report

Energy Technology Data Exchange (ETDEWEB)

Kwon, Young Eun; Choi, Karp Shik; An, Chang Hyeon; Choi, So Young; An, Seo Young [School of Dentistry, Kyungpook National University, Daegu (Korea, Republic of); Lee, Jae Seo [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Chonnam National University, Gwangju (Korea, Republic of)

2017-03-15

A 21-year-old woman presented with facial asymmetry. Crepitus and clicking of the temporomandibular joint were noted. The midline deviated 5.5 mm to the left, and secondary malocclusion was observed. Panoramic and cone-beam computed tomographic images showed an irregular and exophytic bony mass on the anteromedial surface of the right mandibular condyle. A 3-phase bone scan revealed increased tracer uptake on the affected side. The lesion was treated with excision and reshaping under the diagnosis of osteochondroma confirmed by a histopathological examination. The lesion recurred after 3 years, and the patient underwent condylectomy. Mandibular condylar osteochondroma is often resected because it causes functional and aesthetic problems, but it rarely recurs. To the best of our knowledge, only 2 cases of recurrent osteochondromas of the mandibular condyle have been reported previously. Surgical treatment of the osteochondroma should be performed considering the possibility of recurrence, and long-term follow-up is recommended.

Fifteen years of follow-up of a removable prosthetic design to maintain two remaining molars in a patient with mandibular reconstruction

OpenAIRE

Ming-Lun Hsu; Jacqueline Chia-Hsuan Wu; Ling-Ming Yu

2012-01-01

This clinical report describes a long-term prosthetic solution for a patient who had undergone mandibular reconstruction with a fibular graft, leaving only two right molars. The only retention device for the removable prosthesis design included a telescoping system with an O-ring application, but without fibula graft involvement. This prosthesis design was motivated by the altered bony and muscular architecture resulting in an increased maxillomandibular space and thick soft tissue in the den...

Comparison of different radiographic methods for the detection of the mandibular canal

International Nuclear Information System (INIS)

Kim, Eun Kyung

2003-01-01

To compare the visibility of the mandibular canal at the different radiographic methods such as conventional panoramic radiographs, Vimplant multiplanar reformatting (MPR)-CT panoramic images, Vimplant MPR-CT paraxial images and film-based DentaScan MPR-CT images. Data of 11 mandibular dental implant patients, who had been planned treatment utilizing both panoramic and MPR-CT examination with DentaScan software (GE Medical systems, Milwaukee, USA), were used in this study. The archived axial CT data stored on CD-R discs were transferred to a personal computer with 17' LCD monitor. Paraxial and panoramic images were reconstructed using Vimplant software (CyberMed Inc., Seoul, Korea). Conventional panoramic radiographs, monitor-based Vimplant MPR-CT panoramic images, monitor-based Vimplant MPR-CT paraxial images, and film-based DentaScan MPR-CT images were evaluated for visibility of the mandibular canal at the mental foramen, 1 cm, 2 cm, and 3 cm posterior to mental foramen using the 4-point grading score. Vimplant MPR-CT panoramic, paraxial, and DentaScan MPR-CT images revealed significantly clearer images than conventional panoramic radiographs. Particularly at the region 1 cm posterior to mental foramen, conventional panoramic radiographs showed a markedly lower percentage of 'excellent' mandibular canal images than images produced by other modalities. Vimplant MPR-CT and DentaScan MPR-CT images did not show significant difference in visibility of the mandibular canal. The study results shoe that Vimplant and DentaScan MPR-CT imaging systems offer significantly better images of the mandibular canal than conventional panoramic radiograph.

Endodontic therapy for a fused mandibular molar.

Science.gov (United States)

Rotstein, I; Moshonov, J; Cohenca, N

1997-06-01

Variations in tooth morphology present a clinical challenge when endodontic treatment is required. A case of conservative endodontic therapy for a fused mandibular second and third molar is presented.

Neurovascular Content of the Mandibular Canal and Its Clinical Relevance: A Literature Review of the Related Anatomical and Radiological Studies

Directory of Open Access Journals (Sweden)

Eliades Apostolos N.

2014-11-01

Full Text Available In literature, anatomical variations of the inferior alveolar nerve branches (infratemporal, extraosseous and intraosseous are reported and their importance in clinical practice is discussed too. The spatial vessels’ position in relationship with the nerve in the mandibular canal was explored, which is of clinical significance in impacted third molar and implant surgery. It is believed that the neurovascular content of the main mandibular canal follows any variations of the mandibular canal i.e. bifid mandibular, retromolar and accessory mental canals. Retrospective studies and case reports reported the presence of multiple foramina on the medial surface of the ramus, near the main mandibular foramen. In some cases, one supplementary mandibular foramen was found to be connected with the lower third molar, which is called “temporal crest canal”. Others found an accessory mandibular foramen that led into a second mandibular canal which joined the main mandibular canal (double anteriorly. The bony canals contained a terminal branch of the anterior trunk of the mandibular nerve or a branch of inferior alveolar nerve before it entered the mandibular foramen.

Use of monocortical miniplates for the intraoral treatment of mandibular fractures.

Science.gov (United States)

Chiodo, Thomas A; Milles, Maano

2009-03-01

Fixation of mandibular fractures using rigid hardware has gained wide acceptance over the past 3 decades. The goal of rigid internal fixation is to allow for fracture healing with limited, or no, time in maxillo-mandibular fixation. There has been significant evolution in plate and screw materials and design over the past 30 years. The term miniplate is used to describe a fracture plate with a screw diameter of 2.0 mm or less. With correct diagnosis and understanding of the forces affecting mandible fractures, miniplates can be applied transorally in various situations, allowing for less invasive treatment with open reduction of mandible fractures. This article describes the use of monocortical miniplates for the intraoral treatment of mandibular fractures.

Relationship of maxillary 3-dimensional posterior occlusal plane to mandibular spatial position and morphology.

Science.gov (United States)

Coro, Jorge C; Velasquez, Roberto L; Coro, Ivette M; Wheeler, Timothy T; McGorray, Susan P; Sato, Sadao

2016-07-01

The purpose of this study was to examine the relationship of the 3-dimensional (3D) posterior occlusal plane (POP) and the mandibular 3D spatial position. The relationship of the POP to mandibular morphology was also investigated. Retrospective data from a convenience sample of pretreatment diagnostic cone-beam computed tomography scans were rendered using InVivo software (Anatomage, San Jose, Calif). The sample consisted of 111 subjects (51 male, 60 female) and included growing and nongrowing subjects of different races and ethnicities. The 3D maxillary POP was defined by selecting the cusp tips of the second premolars and the second molars on the rendered images of the subjects. The angles made by this plane, in reference to the Frankfort horizontal plane, were measured against variables that described the mandibular position in the coronal, sagittal, and axial views. The POP was also compared with bilateral variables that described mandibular morphology. There were significant differences of the POP among the different skeletal malocclusions (P <0.0001). The POP showed significant correlations with mandibular position in the sagittal (P <0.0001), coronal (P <0.05), and axial (P <0.05) planes. The POP also showed a significant correlation with mandibular morphology (P <0.0001). These findings suggest that there is a distinct and significant relationship between the 3D POP and the mandibular spatial position and its morphology. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Cobalt-Based Electrolytes for Dye-Sensitized Solar Cells: Recent Advances towards Stable Devices

Directory of Open Access Journals (Sweden)

Federico Bella

2016-05-01

Full Text Available Redox mediators based on cobalt complexes allowed dye-sensitized solar cells (DSCs to achieve efficiencies exceeding 14%, thus challenging the emerging class of perovskite solar cells. Unfortunately, cobalt-based electrolytes demonstrate much lower long-term stability trends if compared to the traditional iodide/triiodide redox couple. In view of the large-scale commercialization of cobalt-based DSCs, the scientific community has recently proposed various approaches and materials to increase the stability of these devices, which comprise gelling agents, crosslinked polymeric matrices and mixtures of solvents (including water. This review summarizes the most significant advances recently focused towards this direction, also suggesting some intriguing way to fabricate third-generation cobalt-based photoelectrochemical devices stable over time.

Finite element analysis of dental implant loading on atrophic and non-atrophic cancellous and cortical mandibular bone - a feasibility study.

Science.gov (United States)

Marcián, Petr; Borák, Libor; Valášek, Jiří; Kaiser, Jozef; Florian, Zdeněk; Wolff, Jan

2014-12-18

The first aim of this study was to assess displacements and micro-strain induced on different grades of atrophic cortical and trabecular mandibular bone by axially loaded dental implants using finite element analysis (FEA). The second aim was to assess the micro-strain induced by different implant geometries and the levels of bone-to-implant contact (BIC) on the surrounding bone. Six mandibular bone segments demonstrating different grades of mandibular bone atrophy and various bone volume fractions (from 0.149 to 0.471) were imaged using a micro-CT device. The acquired bone STL models and implant (Brånemark, Straumann, Ankylos) were merged into a three-dimensional finite elements structure. The mean displacement value for all implants was 3.1 ±1.2 µm. Displacements were lower in the group with a strong BIC. The results indicated that the maximum strain values of cortical and cancellous bone increased with lower bone density. Strain distribution is the first and foremost dependent on the shape of bone and architecture of cancellous bone. The geometry of the implant, thread patterns, grade of bone atrophy and BIC all affect the displacement and micro-strain on the mandible bone. Preoperative finite element analysis could offer improved predictability in the long-term outlook of dental implant restorations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Do Mandibular Advancement Devices Influence Patients' Snoring and Obstructive Sleep Apnea?

DEFF Research Database (Denmark)

Marcussen, Lillian; Henriksen, Jan Erik; Thygesen, Torben

2015-01-01

Student's t test and the Wilcoxon signed rank test, and mixed-model analyses were performed adjusting for sleep apnea severity, type 2 diabetes, body mass index, gender, and age. RESULTS: A total of 44 patients (31 men and 13 women, age 50 ± 13 years, body mass index 31 ± 5.6 kg/m(2)) completed the trial...

Reliability of Strength Testing using the Advanced Resistive Exercise Device and Free Weights

Science.gov (United States)

English, Kirk L.; Loehr, James A.; Laughlin, Mitzi A.; Lee, Stuart M. C.; Hagan, R. Donald

2008-01-01

The Advanced Resistive Exercise Device (ARED) was developed for use on the International Space Station as a countermeasure against muscle atrophy and decreased strength. This investigation examined the reliability of one-repetition maximum (1RM) strength testing using ARED and traditional free weight (FW) exercise. Methods: Six males (180.8 +/- 4.3 cm, 83.6 +/- 6.4 kg, 36 +/- 8 y, mean +/- SD) who had not engaged in resistive exercise for at least six months volunteered to participate in this project. Subjects completed four 1RM testing sessions each for FW and ARED (eight total sessions) using a balanced, randomized, crossover design. All testing using one device was completed before progressing to the other. During each session, 1RM was measured for the squat, heel raise, and deadlift exercises. Generalizability (G) and intraclass correlation coefficients (ICC) were calculated for each exercise on each device and were used to predict the number of sessions needed to obtain a reliable 1RM measurement (G . 0.90). Interclass reliability coefficients and Pearson's correlation coefficients (R) also were calculated for the highest 1RM value (1RM9sub peak)) obtained for each exercise on each device to quantify 1RM relationships between devices.

Application of the Mandible Injury Severity Score to Pediatric Mandibular Fractures.

Science.gov (United States)

Swanson, Edward W; Susarla, Srinivas M; Ghasemzadeh, Ali; Mundinger, Gerhard S; Redett, Richard J; Tufaro, Anthony P; Manson, Paul N; Dorafshar, Amir H

2015-07-01

The Mandible Injury Severity Score (MISS) has been used to evaluate adult mandibular fractures. The purpose of this study was to evaluate the MISS in a cohort of pediatric patients. This was a retrospective study of pediatric patients treated for mandibular fractures over a 20-year period. Patients were included if they had computed tomographic imaging available for review and had at least 1 post-treatment visit. The primary predictor variable was the MISS. Secondary predictors were demographic and injury-associated factors. The outcome was treatment-associated complications. Descriptive, bivariate, and multiple logistic regression statistics were computed. One hundred sixteen patients with mandibular fractures were identified; 73 (62.9%) met the inclusion criteria. The sample's mean age was 8.5 ± 4.1 years; 44% were girls. Motor vehicle collisions (60%) and falls (15.1%) were the most common mechanisms. More than 50% of patients had an extra-mandibular injury. The mean MISS was 13.5 ± 7.8. Forty-five percent of the sample underwent open reduction and internal fixation. Complications were noted in 20.5% of patients, of which malocclusion was the most common (8.2%). Increasing MISS was associated with complications (P pediatric patients with mandibular fractures, increased severity of injury is associated with complications, even after controlling for the effects of multiple confounders, including open treatment. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Two independent anion transport systems in rabbit mandibular salivary glands

DEFF Research Database (Denmark)

Novak, I; Young, J A

1986-01-01

Cholinergically stimulated Cl and HCO3 transport in perfused rabbit mandibular glands has been studied with extracellular anion substitution and administration of transport inhibitors. In glands perfused with HCO3-free solutions, replacement of Cl with other anions supported secretion in the foll......Cholinergically stimulated Cl and HCO3 transport in perfused rabbit mandibular glands has been studied with extracellular anion substitution and administration of transport inhibitors. In glands perfused with HCO3-free solutions, replacement of Cl with other anions supported secretion...... stimulated secretion by about 30%, but when infused in addition to furosemide (0.1 mmol/l), it inhibited by about 20%. Amiloride (1.0 mmol/l) caused no inhibition. The results suggest that there are at least three distinct carriers in the rabbit mandibular gland. One is a furosemide-sensitive Na-coupled Cl...

A Simplified Way for the Stabilization of Pediatric Mandibular Fracture With an Occlusal Splint.

Science.gov (United States)

Demirkol, Mehmet; Demirkol, Nermin; Abdo, Omar Hasan; Aras, Mutan Hamdi

2016-06-01

The management of pediatric mandibular fractures is challenging for maxillofacial surgeons due to ongoing mandibular growth involving tooth buds. The treatment of such fractures has been a topic of much research. Generally accepted methods for the treatment of mandibular parasymphyseal or symphyseal fractures in children are conservative approaches involving the use of acrylic splints, lateral compression with an open-cap splint stabilized by circummandibular wiring, and maxillomandibular fixation with an arch bar and eyelet wiring. The aim of this technical note was to describe a straightforward approach to the treatment of pediatric mandibular fractures, in which an occlusal splint is secured to prevent trauma to the soft tissue, without the need for general anesthesia.

Active Shape Analysis of Mandibular Growth

DEFF Research Database (Denmark)

Hilger, Klaus Baggesen; Larsen, Rasmus; Kreiborg, Sven

2003-01-01

This work contains a clinical validation using biological landmarks of a Geometry Constrained Diffusion registration of mandibular surfaces. Canonical Correlations Analysis is extended to analyse 3D landmarks and the correlations are used as similarity measures for landmark clustering. A novel Ac...

Aesthethic and masticatory rehabilitation on post mandibular resection with combination of hollow obturator and hybrid prosthesis

Directory of Open Access Journals (Sweden)

Arif Rachman

2009-06-01

Full Text Available Background: Replacing tooth lost caused by caries, periodontal disease, trauma and neoplasm including ameloblastoma which requires mandibular resection is important. Purpose: The aim of the study to rehabilitation of post mandibular resection with combination of hollow obturator and hybrid prosthesis. Case: A patient 25 years old, male, for having prosthesis to cover defect due to post right mandibular resection. Case Management: In this presented case, mandibular plate was applied due to spreading defect with losing almost a half body of mandible (class II modification 2 according to cantor and curtis classification. The design of therapy was mandibular obturator using hybrid prosthesis (removable partial denture metal frame and fixed splint crown with precision attachment with hollow obturator. The application was based on several advantages: good aesthetic performance, retention, stability, lighter weight and equal share of vertical load for teeth on non surgical site. The result of control I, II, III, showed that aesthetic performance, masticatory function, speech and swallowing were in good condition. Conclusion: The design of mandibular obturator using hybrid denture with hollow obturator could rehabilitate aesthetic performance, masticatory function, speech and swallowing for patient with post mandibular resection.

[The temporo-mandibular articulation].

Science.gov (United States)

Dargaud, J; Vinkka-Puhakka, H

2004-04-01

The standing posture of humans has created both morphological and functional adaptations in the temporo-mandibular joint and the masticatory function. This biped state is the one of the most important characteristic of human evolution. It is furthermore the agent determining most of the functional changes in the whole body. This survey will be carried out in several levels including, a descriptive anatomy, biomechanics, radiological imaging, functioning in the articulation of TMJ. The descriptive anatomic picture will be obtained by the traditional dissection techniques. 20 TMJ joints are dissected from 10 cadavers: 7 cadavers, 65-75 year old, 3 cadavers, 60-65 year old. The x-rays are lateral view and the subjects of the radiological imaging are young's, adults and olds: 1, 3 y-old Male; 1, 7 y-old Female; 1, 14 y-old Female; 10, 19-23 y-old Male; 1, 26 y-old Female; 1, 34 y-old Male; 1, 75 y-old Female. The anatomic elements in the TMJ well resembled the ones described in the literature of the capsule, the ligament, the masticator muscles (masseter, temporal, medial and lateral pterygoids). The temporo-mandibular ligament proved to be difficult to separate from the capsule in some of the specimens. Sometimes it was not always found after a dissection.

Comparison of treatments with the Forsus fatigue resistant device in relation to skeletal maturity: a cephalometric and magnetic resonance imaging study.

Science.gov (United States)

Aras, Aynur; Ada, Emel; Saracoğlu, Hatice; Gezer, Naciye S; Aras, Isil

2011-11-01

The aim of this study was to compare the dentoskeletal changes and alterations of mandibular condyle-disc-fossa relationships in subjects at the peak and the end of the pubertal growth period treated with the Forsus fatigue resistant device (3M Unitek, Monrovia, Calif). The sample consisted of 29 subjects with Class II Division 1 malocclusions who were classified according to their hand-wrist radiographs. Fifteen patients were at or just before the peak phase of pubertal growth (peak pubertal group). Fourteen patients were near the end of the pubertal growth period (late pubertal group). The study was conducted by using lateral cephalometric radiographs and magnetic resonance images obtained at the beginning and at the end of the application of the Forsus fatigue resistant device. The treatment period was 9 months. The Wilcoxon signed rank test was used to evaluate differences within groups. The changes observed in both groups were compared by using the Mann-Whitney U test. There were statistically significant group differences in mandibular length and ramus length, with significant increases of these parameters in the peak pubertal group (P 0.05), with the exception of mandibular molar vertical movements, which were significantly greater in the peak pubertal group (P positional changes of the mandibular condyle in relation to the glenoid fossa in either group (P >0.05). Although the articular disc was positioned more anteriorly in the peak pubertal group compared with its pretreatment position (P position of the disc was still within the physiologic range. No significant intergroup difference was observed for disc-condyle relationship (P >0.05). The Forsus fatigue resistant device did not appear to cause significant increases in mandibular dimensions in subjects in late puberty. According to the magnetic resonance image findings, Forsus treatment is not a risk factor for the development of temporomandibular dysfunction in subjects with no signs and clinical

Posttraumatic Mandibular Asymmetry Presenting in a Young Adult

Directory of Open Access Journals (Sweden)

Mahnaz Sheikhi, DDS,MS

2017-03-01

Full Text Available One of the most common sites of injury of the facial skeleton is mandibular condyle. However, it is the least diagnosed site of trauma in the head and neck regions. A trauma to the mandible and specifically condylar zone during childhood, may lead to asymmetry or mandibular bilateral distortion, which is usually manifested in the second decade of life when the etiology is unknown to most people. This report is about an adult male complaining about facial asymmetry with an unknown source. Obvious clicking at the right side and shorter right ramus and condyle's head deviation directed us to a childhood trauma and fracture.

Management of pediatric mandibular fracture: a case series.

Science.gov (United States)

Agarwal, Ravi M; Yeluri, Ramakrishna; Singh, Chanchal; Chaudhry, Kalpna; Munshi, Autar K

2014-09-01

A pediatric mandibular fracture can cause a child severe pain and the parent or caregiver extreme worry. While the pattern of fractures and associated injuries in children is similar to adults, the incidence is low. Due to a number of factors, including the anatomical complexity of the developing mandible in a child, management of such fractures differs from that of adults and can greatly challenge the pediatric dentist. Various treatment modalities of managing mandibular fracture are available, such as closed/open cap splint with circummandibular wiring, arch-bar fixation, and cementation of the cap splint. This article reviews 19 cases in the management of pediatric facial fracture using varied treatment methods.

Mandibular molar crown-topography, a biological predisposing ...

African Journals Online (AJOL)

Mandibular molar crown-topography, a biological predisposing factor to development of caries – a post-mortem analysis of 2500 extracted lower permanent molars at the dental centre, University of Benin teaching hospital.

Coronectomy of the mandibular third molar: Respect for the inferior alveolar nerve

NARCIS (Netherlands)

Kouwenberg, A. J.; Stroy, L. P. P.; Rijt, E. D. Vree-V. D.; Mensink, G.; Gooris, P. J. J.

2016-01-01

The aim of this study was to evaluate the outcomes of coronectomy as an alternative surgical procedure to complete removal of the impacted mandibular third molar in patients with a suspected close relationship between the tooth root(s) and the mandibular canal. A total of 151 patients underwent

Rostral mandibular fracture repair in a pet bearded dragon (Pogona vitticeps).

Science.gov (United States)

Nau, Melissa R; Eshar, David

2018-04-15

CASE DESCRIPTION A 2-year-old male bearded dragon (Pogona vitticeps) was evaluated because of a traumatic mandibular fracture. CLINICAL FINDINGS An open comminuted fracture of the rostral aspect of the right mandible was evident, with a fragment of bone exposed and dorsally displaced. Whole-body radiography revealed no evidence of additional injury. Other findings were unremarkable, except for moderate anemia (PCV, 19%). TREATMENT AND OUTCOME The fracture fragments were stabilized with 2 crossed 36-gauge interfragmentary wire loops. An external fixator device was fashioned from four 25-gauge needles inserted at alternating angles through the fracture fragments; plastic IV fluid line tubing filled with dental acrylic was used as a connecting bar. One day after surgery, the lizard had regained its typical activity level and appetite. Body weight was measured and the external fixator was inspected 1 week after surgery and monthly thereafter. Three months after initial injury, the fracture was stable, radiography revealed bony callus formation at the fracture site, and the external fixator was removed. Recheck radiography performed 5.5 months after initial injury revealed complete osseous union of the fracture fragments, and the interfragmentary wires were removed. CLINICAL RELEVANCE Surgical management of the traumatic comminuted mandibular fracture in this bearded dragon by means of a combination of internal and external fixation resulted in complete healing of the mandible and restoration of function. Management of this complicated fracture was achieved with the aid of readily available and inexpensive supplies in a clinical setting, which may be useful to other clinicians in the management of similar cases.

Mandibular Kondil Kırıkları ve Tedavi Yöntemleri

OpenAIRE

Kısa, Halil İbrahim; Tatlı, Ufuk; Kürkcü, Mehmet

2014-01-01

Maxillofacial injuries are most commonly associated with falls, motor and vehicle accidents, sports-related trauma, and interpersonel violence. The complexity of mandibular condyle region and its anatomic proximity to other craniofacial structures complicate diagnosis and treatment. Thus, treatment approaches of mandibular condyle fracture are still controversial. In the literature, different success rates are reported about observation versus treatment, closed reduction versus open reduction...

Use of rectangular grid miniplates for fracture fixation at the mandibular angle.

Science.gov (United States)

Hochuli-Vieira, Eduardo; Ha, Thi Khanh Linh; Pereira-Filho, Valfrido Antonio; Landes, Constantin Alexander

2011-05-01

The aim of this study was to evaluate the clinical outcome of patients with mandibular angle fractures treated by intraoral access and a rectangular grid miniplate with 4 holes and stabilized with monocortical screws. This study included 45 patients with mandibular angle fractures from the Department of Oral and Maxillofacial Surgery São Paulo State University, Araraquara, Brazil, and from the Clinic of Oral and Maxillofacial Surgery at the University of Frankfurt, Germany. The 45 fractures of the mandibular angle were treated with a rectangular grid miniplate of a 2.0-mm system by an intraoral approach with monocortical screws. Clinical evaluations were postoperatively performed at 15 and 30 days and 3 and 6 months, and the complications encountered were recorded and treated. The infection rate was 4.44% (2 patients), and in 1 patient it was necessary to replace hardware. This patient also had a fracture of the left mandibular body; 3 patients (6.66%) had minor occlusal changes that have been resolved with small occlusal adjustments. Before surgery, 15 patients (33.33%) presented with hypoesthesia of the inferior alveolar nerve; 4 (8.88%) had this change until the last clinical control, at 6 months. The rectangular grid miniplate used in this study was stable for the treatment of simple mandibular angle fractures through intraoral access, with low complication rates, easy handling, and easy adjustment, with a low cost. Concomitant mandibular fracture may increase the rate of complications. This plate should be indicated in fractures with sufficient interfragmentary contact. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Surgical treatment of sagittal fracture of mandibular condyle using long-screw osteosynthesis.

Science.gov (United States)

Luo, Shufang; Li, Bo; Long, Xing; Deng, Mohong; Cai, Hengxing; Cheng, Yong

2011-07-01

The retrospective study evaluated long-screw (bicortical screw) osteosynthesis used in the surgical treatment of sagittal fracture of the mandibular condyle and compared it with titanium plates and removal of the condylar fragment. Ninety-five patients with sagittal fracture of the mandibular condyle received open surgical treatment from 1997 to 2008. Among these patients, the condylar fragments were fixed with long screws in 56 cases (group A), were fixed with titanium plates in 12 cases (group B), and were completely removed in 24 cases (group C). Follow-up was carried out clinically and radiologically. The clinical features included limitation of mandibular mobility, occlusion disturbance, lateral deviation on mouth opening, joint pain, clicking, facial asymmetry, and patient's subjective evaluation. The radiologic parameters consisted of degree of bony resorption, bony change, change of osteosynthesis material, and shortening of mandibular ramus height. Anatomic reduction and functional restoration were obtained and no severe complication was detected in group A. However, 3 of 14 patients had severe osteoarthrosis and 2 of 14 patients had ankylosis in group B. In group C 3 of 24 patients had mandibular retrusion, 4 of 24 patients had front teeth open bite, 4 of 24 patients had severe osteoarthrosis, and 1 of 24 patients had ankylosis. The long-screw fixation group had a more favorable prognosis than the titanium plate group and the group in which removal of the condylar fragment was performed. The long-screw fixation technique might be suitable for use in the surgical treatment of sagittal fractures of the mandibular condyle. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures.

NARCIS (Netherlands)

Creugers, N.H.J.; Witter, D.J.; Spijker, A. van 't; Gerritsen, A.E.; Kreulen, C.M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches

Cone beam volume tomography: an imaging option for diagnosis of complex mandibular third molar anatomical relationships.

Science.gov (United States)

Danforth, Robert A; Peck, Jerry; Hall, Paul

2003-11-01

Complex impacted third molars present potential treatment complications and possible patient morbidity. Objectives of diagnostic imaging are to facilitate diagnosis, decision making, and enhance treatment outcomes. As cases become more complex, advanced multiplane imaging methods allowing for a 3-D view are more likely to meet these objectives than traditional 2-D radiography. Until recently, advanced imaging options were somewhat limited to standard film tomography or medical CT, but development of cone beam volume tomography (CBVT) multiplane 3-D imaging systems specifically for dental use now provides an alternative imaging option. Two cases were utilized to compare the role of CBVT to these other imaging options and to illustrate how multiplane visualization can assist the pretreatment evaluation and decision-making process for complex impacted mandibular third molar cases.

Strategic camouflage treatment of skeletal Class III malocclusion (mandibular prognathism) using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy.

Science.gov (United States)

Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2016-01-01

This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Cerebro-costo-mandibular syndrome with consanguinity

International Nuclear Information System (INIS)

Clarke, E.A.; Nguyen, V.D.

1985-01-01

The cerebro-costo-mandibular syndrome is a rare disorder characterized by unique posterior rib defectes, micrognathia, and mental deficiency. The mode of transmission is undetermined. This report describes the first case with documented parental consanguinity as well as hitherto undescribed CT and skeletal findings. (orig.)

Oro-mandibular manifestations of primary hyperparathyroidism

Directory of Open Access Journals (Sweden)

Sachin Rai

2012-01-01

Conclusion : Loss of lamina dura, ground glass appearance, and mandibular cortical width reduction are common findings in primary hyperparathyroidism and these are significantly correlated with elevated parathormone and alkaline phosphatase. However, the presence of brown tumors and oral tori are less commonly encountered features.

Efectos de los aparatos propulsores mandibulares fijos en la articulación temporomandibular

OpenAIRE

Palomino-Gómez, Sandra P; Almeida, Kelei M; de Mello, Patricia B; Restrepo, Manuel; Ravelr, Dirceu B

2014-01-01

Resumen Los aparatos propulsores mandibulares fijos son una alternativa en el tratamiento de la maloclusión Clase II con deficiencia mandibular. La propiedad de ser fijo, condiciona a la mandíbula a una posición anterior forzada en reposo y durante todas las funciones mandibulares. Cuando se utiliza un aparato de propulsión, la mandíbula se desplaza hacia delante y hacia abajo. Este movimiento conduce a una nueva posición al cóndilo, que puede afectar el funcionamiento normal de la articulaci...

Transmigration of Mandibular Canine: Report of Four Cases and Review of Literature

Directory of Open Access Journals (Sweden)

Gaurav Sharma

2011-01-01

Full Text Available Transmigration of canine is a rare phenomenon. The prevalence of transmigration of mandibular canine has been found to be only 0.14%–0.31%. The treatment of impacted transmigrated canine is very complicated if it is diagnosed at a later stage. We report 4 cases of transmigration of mandibular canine and review the literature regarding the etiology and treatment. Panoramic radiograph should be taken during the mixed dentition period if the mandibular canine has not erupted from more than one year from its normal chronological age of eruption as intraoral periapical radiograph examination will not always detect an impacted or transmigrated canine.

Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

International Nuclear Information System (INIS)

Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key

2016-01-01

To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism

Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

Energy Technology Data Exchange (ETDEWEB)

Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key [Dept. of Oral and Maxillofacial Surgery, National Health Insurance Service Ilsan Hospital, Goyang (Korea, Republic of)

2016-06-15

To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

Glenoid fossa position in Class III malocclusion associated with mandibular protrusion.

Science.gov (United States)

Innocenti, Cristina; Giuntini, Veronica; Defraia, Efisio; Baccetti, Tiziano

2009-04-01

Our aim in this study was to investigate the position of the glenoid fossa in subjects with Class III malocclusion associated with mandibular protrusion to better clarify the role of this craniofacial component in Class III skeletal disharmony. A sample of 30 subjects, aged 8 years +/- 6 months, with skeletal and dental Class III malocclusion associated with mandibular protrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a control group of 33 subjects with skeletal and dental Class I relationships. The comparisons between the Class III group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed with the Mann-Whitney U test at P <0.05. Subjects with Class III malocclusion had a significantly more mesial position of the glenoid fossa, when compared with the control group as measured with 3 parameters. An anterior position of the glenoid fossa is a possible diagnostic anatomic feature of Class III malocclusion associated with mandibular protrusion. An effective measurement to evaluate glenoid fossa position in craniofacial relationships is the cephalometric distance from the glenoid fossa to the frontomaxillary-nasal suture.

Effects of mandibular protraction appliance associated to fixed appliance in adults

Directory of Open Access Journals (Sweden)

Bruno D'Aurea Furquim

2013-10-01

Full Text Available OBJECTIVE: This retrospective study aimed to conduct a cephalometric evaluation of the skeletal, dental and soft tissue effects resulting from treatment of adult patients presenting Class II malocclusion, performed with a Mandibular Protraction Appliance (MPA combined with a fixed orthodontic appliance. METHODS: The sample consisted of teleradiographs obtained before and after treatment of 9 adult patients (initial mean age of 22.48 years with bilateral Class II, division 1, malocclusion. Paired t test (p < 0.05 was applied to compare initial and final values. RESULTS: t test revealed an increase in anteroinferior facial height and posterior facial height. The dental changes include: extrusion of upper incisors, buccal inclination, protrusion of lower incisors, mesialization and extrusion of mandibular molars. Regarding the soft tissue component, there was an increase in nasolabial angle in addition to upper lip retrusion. CONCLUSIONS: The effects of treating Class II malocclusion adult patients, by means of using Mandibular Protraction Appliance (MPA combined with a fixed appliance were mostly observed in the mandibular arch, and consisted of buccal inclination, protrusion and intrusion of incisors, and mesialization and extrusion of the molars.

Computer Simulation Surgery for Mandibular Reconstruction Using a Fibular Osteotomy Guide

Directory of Open Access Journals (Sweden)

Woo Shik Jeong

2014-09-01

Full Text Available In the present study, a fibular osteotomy guide based on a computer simulation was applied to a patient who had undergone mandibular segmental ostectomy due to oncological complications. This patient was a 68-year-old woman who presented to our department with a biopsy-proven squamous cell carcinoma on her left gingival area. This lesion had destroyed the cortical bony structure, and the patient showed attenuation of her soft tissue along the inferior alveolar nerve, indicating perineural spread of the tumor. Prior to surgery, a three-dimensional computed tomography scan of the facial and fibular bones was performed. We then created a virtual computer simulation of the mandibular segmental defect through which we segmented the fibular to reconstruct the proper angulation in the original mandible. Approximately 2-cm segments were created on the basis of this simulation and applied to the virtually simulated mandibular segmental defect. Thus, we obtained a virtual model of the ideal mandibular reconstruction for this patient with a fibular free flap. We could then use this computer simulation for the subsequent surgery and minimize the bony gaps between the multiple fibular bony segments.

Management of Pediatric Mandibular Fracture Using Orthodontic ...

African Journals Online (AJOL)

2017-05-22

May 22, 2017 ... The pediatric patient is a challenge to manage and ... and osteosynthesis of the pediatric fracture with titanium ... impression material and surgical model prepared with ... circum-mandibular wire were removed under local.

Radiography of the mandible prior to endosseous implant treatment. Localization of the mandibular canal and assessment of trabecular bone

Energy Technology Data Exchange (ETDEWEB)

Lindh, C.

1996-03-01

Mandibular autopsy specimens were examined with different radiographic techniques in order to evaluate the visibility of the mandibular canal and the measurement accuracy of distances related to the mandibular canal. Hypocycloidal, spiral and computed tomography (CT) were superior to periapical and panoramic radiography in visualizing the mandibular canal. The tomographic techniques were more accurate when measurements of distances related to the mandibular canal were performed. No difference in measurement accuracy was found between the tomographic techniques. Concerning visibility of the mandibular canal, interobserver agreement was lowest for periapical radiography and highest for CT. Intraobserver agreement was moderate or good for all techniques. A high interobserver variation was found for measurability of distances related to the mandibular canal. The trabecular bone tissue in mandibular autopsy specimens was studied concerning different characteristics. A classification system to be used prior to implant treatment, based on the trabecular pattern in periapical radiographs, was proposed. 74 refs.

Radiography of the mandible prior to endosseous implant treatment. Localization of the mandibular canal and assessment of trabecular bone

International Nuclear Information System (INIS)

Lindh, C.

1996-03-01

Mandibular autopsy specimens were examined with different radiographic techniques in order to evaluate the visibility of the mandibular canal and the measurement accuracy of distances related to the mandibular canal. Hypocycloidal, spiral and computed tomography (CT) were superior to periapical and panoramic radiography in visualizing the mandibular canal. The tomographic techniques were more accurate when measurements of distances related to the mandibular canal were performed. No difference in measurement accuracy was found between the tomographic techniques. Concerning visibility of the mandibular canal, interobserver agreement was lowest for periapical radiography and highest for CT. Intraobserver agreement was moderate or good for all techniques. A high interobserver variation was found for measurability of distances related to the mandibular canal. The trabecular bone tissue in mandibular autopsy specimens was studied concerning different characteristics. A classification system to be used prior to implant treatment, based on the trabecular pattern in periapical radiographs, was proposed. 74 refs

Donor site complications in bone grafting: comparison of iliac crest, calvarial, and mandibular ramus bone.

Science.gov (United States)

Scheerlinck, Laura M E; Muradin, Marvick S M; van der Bilt, Andries; Meijer, Gert J; Koole, Ronald; Van Cann, Ellen M

2013-01-01

To compare the donor site complication rate and length of hospital stay following the harvest of bone from the iliac crest, calvarium, or mandibular ramus. Ninety-nine consecutively treated patients were included in this retrospective observational single-center study. Iliac crest bone was harvested in 55 patients, calvarial bone in 26 patients, and mandibular ramus bone in 18 patients. Harvesting of mandibular ramus bone was associated with the lowest percentages of major complications (5.6%), minor complications (22.2%), and total complications (27.8%). Harvesting of iliac crest bone was related to the highest percentages of minor complications (56.4%) and total complications (63.6%), whereas harvesting of calvarial bone induced the highest percentage of major complications (19.2%). The length of the hospital stay was significantly influenced by the choice of donor site (P = .003) and age (P = .009); young patients with the mandibular ramus as the donor site had the shortest hospital stay. Harvesting of mandibular ramus bone was associated with the lowest percentage of complications and the shortest hospital stay. When the amount of bone to be obtained is deemed sufficient, mandibular ramus bone should be the first choice for the reconstruction of maxillofacial defects.

SYNOVIAL CHONDROMATOSIS OF THE TEMPORO-MANDIBULAR JOINT. A CASE REPORT

Directory of Open Access Journals (Sweden)

V. MALANCHUK

2015-09-01

Full Text Available The study describes a rare clinical case of synovial chondromatosis of the temporo-mandibular joint, in a 53 year-old patient. In the prehospital stage, the patient was examined by additional diagnostic methods – 3D CT and subsequent computer simulation, in view of subsequent surgery. In January 2015, partial synovektomy of the right temporo-mandibular joint with removal of cartilaginous impurities was performed under general anesthesia. After histopathological confirmation of the clinical diagnosis, the patient was discharged in satisfactory condition, with recommendations for further examination and radiological control. Synovial chondromatosis of the temporo-mandibular joint is a disease characterized by impaired formation of cartilage or of intraarticular, cartilaginous, and relatively rare bone impurities. An important role in the diagnosis of joints’ synovial chondromatosis is played by the instrumental research methods, especially X-ray. Surgical treatment is recommended as a function of the prevalence of lesions.

Prevalence and morphometric analysis of three-rooted mandibular first molars in a Brazilian subpopulation

OpenAIRE

Rodrigues, Clarissa Teles; de Oliveira-Santos, Christiano; Bernardineli, Norberti; Duarte, Marco Antonio Hungaro; Bramante, Clovis Monteiro; Minotti-Bonfante, Paloma Gagliardi; Ordinola-Zapata, Ronald

2016-01-01

ABSTRACT The knowledge of the internal anatomy of three-rooted mandibular molars may help clinicians to diagnose and plan the root canal treatment in order to provide adequate therapy when this variation is present. Objectives: To determine the prevalence of three-rooted mandibular molars in a Brazilian population using cone beam computed tomography (CBCT) and to analyze the anatomy of mandibular first molars with three roots through micro-CT. Material and Methods: CBCT images of 116 patien...

A comparison of cone-beam computed tomography and direct measurement in the examination of the mandibular canal and adjacent structures.

Science.gov (United States)

Kim, Thomas S; Caruso, Joseph M; Christensen, Heidi; Torabinejad, Mahmoud

2010-07-01

The purpose of this investigation was to assess the ability of cone-beam computed tomography (CBCT) scanning to measure distances from the apices of selected posterior teeth to the mandibular canal. Measurements were taken from the apices of all posterior teeth that were superior to the mandibular canal. A pilot study was performed to determine the scanning parameters that produced the most diagnostic image and the best dissection technique. Twelve human hemimandibles with posterior teeth were scanned at .20 voxels on an I-CAT Classic CBCT device (Imaging Sciences International, Hatfield, PA), and the scans were exported in Digital Imaging and Communications in Medicine (DICOM) format. The scans were examined in InVivo Dental software (Anatomage, San Jose, CA), and measurements were taken from the apex of each root along its long axis to the upper portion of the mandibular canal. The specimens were dissected under a dental operating microscope, and analogous direct measurements were taken with a Boley gauge. All measurements were taken in triplicate at least 1 week apart by one individual (TSK). The results were averaged and the data separated into matching pairs for statistical analysis. There was no statistical difference (alpha = .05) between the methods of measurement according to the Wilcoxon matched pairs test (p = 0.676). For the anatomic measurements, the intra-rater correlation coefficient (ICC) was .980 and for the CBCT it was .949, indicating that both methods were highly reproducible. Both measurement methods were highly predictive of and highly correlated to each other according to regression and correlation analysis, respectively. Based on the results of this study, the I-CAT Classic can be used to measure distances from the apices of the posterior teeth to the mandibular canal as accurately as direct anatomic dissection. Copyright 2010 American Association of Endodontists. All rights reserved.

Nerve injury caused by mandibular block analgesia

DEFF Research Database (Denmark)

Hillerup, S; Jensen, Rigmor H

2006-01-01

Fifty-four injection injuries in 52 patients were caused by mandibular block analgesia affecting the lingual nerve (n=42) and/or the inferior alveolar nerve (n=12). All patients were examined with a standardized test of neurosensory functions. The perception of the following stimuli was assessed......: feather light touch, pinprick, sharp/dull discrimination, warm, cold, point location, brush stroke direction, 2-point discrimination and pain perception. Gustation was tested for recognition of sweet, salt, sour and bitter. Mandibular block analgesia causes lingual nerve injury more frequently than...... inferior alveolar nerve injury. All grades of loss of neurosensory and gustatory functions were found, and a range of persisting neurogenic malfunctions was reported. Subjective complaints and neurosensory function tests indicate that lingual nerve lesions are more incapacitating than inferior alveolar...

Mandibular third molar development after mantle radiation in long-term survivors of childhood Hodgkin's disease

International Nuclear Information System (INIS)

McGinnis, J.P. Jr.; Hopkins, K.P.; Thompson, E.I.; Hustu, H.O.

1987-01-01

Sequential panoramic radiographs were assessed for mandibular third molar development in 47 long-term survivors of childhood Hodgkin's disease after treatment with 37 Gy mantle field radiation. To make a comparison, panoramic radiographs of 149 healthy, nonirradiated children were reviewed for the presence of mandibular third molars. In children between the ages of 7 and 12 years, bilateral agenesis of mandibular third molars was more frequent in patients who had been treated with mantle radiation than in nonirradiated patients. Unilateral agenesis, crown hypoplasia, and root growth impairment of mandibular third molars were also found. Similar, apparent, radiation-induced developmental anomalies were noted in maxillary third molars of the irradiated patients

Dynamic MR imaging of mandibular osteoradionecrosis

International Nuclear Information System (INIS)

Store, G.; Smith, H.J.; Larheim, T.A.

2000-01-01

Osteoradionecrotic bone has been characterised as hypovascular and metabolically inactive tissue with impaired perfusion. The present study was conducted to determine if dynamic contrast-enhanced MR imaging could provide additional information about the vascularity of radionecrotic mandibular bone. Dynamic contrast-enhanced MR imaging was performed on 10 patients with mandibular osteoradionecrosis (ORN), and on 6 patients, irradiated for oropharyngeal tumours, without symptoms or signs of ORN. Nine patients in the ORN group received a series of 20 hyperbaric oxygen (HBO) treatments, after which the dynamic MR investigation was repeated. Radiation per se did not lead to increased contrast enhancement, whereas all patients with ORN showed marked contrast enhancement of the osteoradionecrotic bone marrow. After HBO treatment, pathological contrast enhancement of the abnormal bone marrow could still be seen, but the rate of enhancement was less than before in 7 of 9 patients. Two patients had an increase in the enhancement rate. The findings suggest the existence of an increased and patent microvasculature

A study of angle of mandibular canal and mental foramen on the panoramic radiograph

International Nuclear Information System (INIS)

Choi, Hang Moon

2009-01-01

To assessment the angle between mandibular canal and occlusal plane at each posterior tooth region and location of mental foramen on the panoramic radiographs. This study analysed 46 half-mandibles of panoramic radiographs. Inferior border of mandibular canal was traced. Occlusal plane was drawn from lingual cusp tip of the first premolar to distolingual cusp tip of the second molar. Perpendicular line from occlusal plane was drawn at each tooth region and then tangential lines were drawn from the crossing points at canal. The angle between occlusal plane and tangential line was measured. The location of mental foramen was also studied. According to the location of mental foramen, radiographs were divided into M (mesial) group and D (distal) group on the basis of the second premolar. and then inter-group analysis about mandibular canal angle was done. The angles of mandibular canals were -17.7 .deg. C, -9.5 .deg. C, 8.2 .deg. C, 22.3 .deg. C, and 39.2 .deg. C at first premolar, second premolar, first molar, second molar, and third molar, respectively. The commonest position of the mental foramen was distal to the second premolar. Inter-group comparison showed statistically significant difference at the second premolar and the first molar (p<0.001). The acknowledgement of mandibular canal angulation and location of mental foramen can help understanding the course of mandibular canal.

Advances in thermal-hydraulic studies of a transmutation advanced device for sustainable energy applications

International Nuclear Information System (INIS)

Fajardo, Laura Garcia; Castells, Facundo Alberto Escriva; Lira, Carlos Brayner de Olivera

2013-01-01

The Transmutation Advanced Device for Sustainable Energy Applications (TADSEA) is a pebble-bed Accelerator Driven System (ADS) with a graphite-gas configuration, designed for nuclear waste trans- mutation and for obtaining heat at very high temperatures to produce hydrogen. In previous work, the TADSEA's nuclear core was considered as a porous medium performed with a CFD code and thermal-hydraulic studies of the nuclear core were presented. In this paper, the heat transfer from the fuel to the coolant was analyzed for three core states during normal operation. The heat transfer inside the spherical fuel elements was also studied. Three critical fuel elements groups were defined regarding their position inside the core. Results were compared with a realistic CFD model of the critical fuel elements groups. During the steady state, no critical elements reached the limit temperature of this type of fuel. (author)

Prevalence and features of distolingual roots in mandibular molars analyzed by cone-beam computed tomography

International Nuclear Information System (INIS)

Choi, Mi Ree; Moon, Young Mi; Seo, Min Seock

2015-01-01

This study evaluated the prevalence of distolingual roots in mandibular molars among Koreans, the root canal system associated with distolingual roots, and the concurrent appearance of a distolingual root in the mandibular first molar and a C-shaped canal in the mandibular second molar. Cone-beam computed tomographic images of 264 patients were screened and examined. Axial sections of 1056 mandibular molars were evaluated to determine the number of roots. The interorifice distances from the distolingual canal to the distobuccal canal were also estimated. Using an image analysis program, the root canal curvature was calculated. Pearson's chi-square test, the paired t-test, one-way analysis of variance, and post-hoc analysis were performed. Distolingual roots were observed in 26.1% of the subjects. In cases where a distolingual root was observed in the mandibular molar, a significant difference was observed in the root canal curvature between the buccolingual and mesiodistal orientations. The maximum root canal curvature was most commonly observed in the mesiodistal orientation in the coronal portion, but in the apical portion, maximum root canal curvature was most often observed in the buccolingual orientation. The canal curvature of distolingual roots was found to be very complex, with a different direction in each portion. No correlation was found between the presence of a distolingual root in the mandibular first molar and the presence of a C-shaped canal in the mandibular second molar

Epidemiology of Surgically Managed Mandibular Condylar Fractures at a Tertiary Referral Hospital in Urban Southwest China.

Science.gov (United States)

Thapa, Swosti; Wang, Jun; Hu, Hong-Tao; Zhang, Fu-Gui; Ji, Ping

2017-01-01

Mandibular condylar fracture is one of the commonest maxillofacial fractures treated by maxillofacial surgeons. Demography of the patients, causation, and characteristics of the fracture depends on various socio-economic factors. Hence, maxillofacial surgeons should be familiar with epidemiology of mandibular condylar fracture. This study retrospectively describes the demography, etiology, fracture characteristics, and hospital utilization of surgically treated mandibular condylar fractures in a tertiary referral hospital in urban China in past five years. Data of all patients who underwent surgical management between 2011 and 2015 were collected. This included aetiology, characteristics of fracture, time, age, sex, associated injuries, and hospital utilization of 166 patients with 208 mandibular condylar fractures. These patients had undergone open reduction and internal fixation with either miniplates or lag screws. Among the fracture of head of mandibular condyle, 21.28% of the patients had the fracture segments removed. These data were statistically analyzed to describe the epidemiology of mandibular condylar fracture. Most of the patients had unilateral mandibular condylar fractures (74.7%). Male patients (76.51%) outnumbered female patients (23.49%) in this cohort. The average age of the patients was 37 years. The fractures were mostly caused by fall from height (60.84%) and were located at the condylar neck (53.61%). Most of the patients had other associated maxillofacial injuries (71.08%) which were mostly located at symphysis and parasymphysis (44.59%). It took 12.58 +/- 0.35 days of hospitalization for the treatment. Fall from height was the most prevalent cause of mandibular condylar injury in mountainous urban China. The people at highest risk were middle-aged men. Mandibular condylar fracture was mostly located at the condylar neck and was usually associated with fracture at the symphysis and parasymphysis.

Patient satisfaction and dissatisfaction with mandibular two-implant overdentures using different attachment systems: 5-year outcomes.

Science.gov (United States)

Al-Zubeidi, Mohammed I; Alsabeeha, Nabeel H M; Thomson, W Murray; Payne, Alan G T

2012-10-01

Different attachment systems for mandibular two-implant overdentures could influence levels of patient satisfaction. Positive consensus of the majority of patients being satisfied does not preclude the possibility of dissatisfaction for some. To evaluate patient satisfaction and dissatisfaction before and after 5 years of wearing mandibular two implant overdentures using different attachment systems ; to determine the prognostic relevance of pretreatment complete denture complaints to treatment outcomes. A total of 106 edentulous participants enrolled in a clinical trial completed a preliminary self-report inventory of their original complete denture complaints.New complete maxillary dentures and mandibular two-implant overdentures were provided to each participant using one of six different attachment systems. Patient satisfaction was determined at pretreatment; at baseline with mandibular two-implant overdenture insertion; and then annually for 5 years, using visual analogue and Likert-type scales. Patient satisfaction with mandibular two-implant overdentures showed significant changes pre- to posttreatment(baseline) in all domains, but these were significant immediately and maintained without further significance for 5 years, other than pain with the overdenture. After 5 years, no significant differences were observed with all the attachment systems. Highly significant differences were found with some social and psychological aspects by the fifth year compared to baseline. Diagnostic and prognostic indicators from a pretreatment inventory identified 12 participants (13.5%) who were dissatisfied. These indicators revealed a maladaptive predisposition to mandibular two-implant overdentures. The provision of mandibular two-implant overdentures will, in the majority of patients, significantly enhance levels of patient satisfaction for 5 years, as compared to complete mandibular dentures, regardless of the attachment system. Careful evaluation of pretreatment

Fixation of zygomatic and mandibular fractures with biodegradable plates.

Science.gov (United States)

Degala, Saikrishna; Shetty, Sujeeth; Ramya, S

2013-01-01

In this prospective study, 13 randomly selected patients underwent treatment for zygomatic-complex fractures (2 site fractures) and mandibular fractures using 1.5 / 2 / 2.5-mm INION CPS biodegradable plates and screws. To assess the fixation of zygomatic-complex and mandibular fractures with biodegradable copolymer osteosynthesis system. In randomly selected 13 patients, zygomatic-complex and mandibular fractures were plated using resorbable plates and screws using Champy's principle. All the cases were evaluated clinically and radiologically for the type of fracture, need for the intermaxillary fixation (IMF) and its duration, duration of surgery, fixation at operation, state of reduction at operation, state of bone union after operation, anatomic reduction, paresthesia, occlusal discrepancies, soft tissue infection, immediate and late inflammatory reactions related to biodegradation process, and any need for the removal of the plates. Descriptives, Frequencies, and Chi-square test were used. In our study, the age group range was 5 to 55 years. Road traffic accidents accounted for the majority of patients six, (46.2%). Postoperative occlusal discrepancies were found in seven patients as mild to moderate, which resolved with IMF for 1-8 weeks. There were minimal complications seen and only as soft tissue infection. Use of biodegradable osteosynthesis system is a reliable alternative method for the fixation of zygomatic-complex and mandibular fractures. The biodegradable system still needs to be refined in material quality and handling to match the stability achieved with metal system. Biodegradable plates and screws is an ideal system for pediatric fractures with favorable outcome.

Maxillary complete denture outcome with two-implant supported mandibular overdentures. A systematic review.

Science.gov (United States)

Rutkunas, Vygandas; Mizutani, Hiroshi; Peciuliene, Vytaute; Bendinskaite, Ruta; Linkevicius, Tomas

2008-01-01

Research data regarding maxillary complete denture outcome with two-implant supported mandibular overdentures are not consistent. Considering multiple publications on implant supported mandibular overdentures, it was decided to summarize currently present evidence on the maxillary complete dentures opposed by implant-supported mandibular overdentures, and analyze factors that could potentially influence the outcomes. The articles from 1985 to 2007 related to the topic were identified in the online MEDLINE/Pubmed and other databases and manually. Primary articles were scanned, and irrelevant studies were excluded from the further review process. Potentially relevant titles and abstracts were provisionally included for consideration on the basis of full text articles. Full text articles were obtained from on-line and printed sources. The data from the studies were extracted and reviewed. The study has failed to identify any prospective satisfying inclusion/exclusion criteria RCT reporting on maxillary bone resorption. The number of maxillary complete denture relining incidences per patient was constantly increasing during the 10-year period. Maxillary complete denture remake incidences comprised 16-33 % of the number of patients followed during the 10-year period. Comparing patient satisfaction with upper dentures at the baseline and after two years, no decrease in satisfaction was noticed. There is no evidence that maxillary ridge resorption is accelerated with certain types of two-implant supported mandibular overdenture attachments. Most common complication for the maxilla - prosthetic maintenance. There is a risk of decreased patient satisfaction with bar-supported mandibular overdenture. Further studies are needed to provide evidence for the maxillary complete denture outcome with two-implant supported mandibular overdentures.

Visibility of the mandibular canal and the mental foramen in panoramic radiography

International Nuclear Information System (INIS)

Jeong, Seon Jin; Choi, Eui Hwan; Kim, Jae Duk

2001-01-01

To determine the head position that the superior border of the mandibular canal as well as mental foramen can be more clearly visualized in panoramic radiography. Ten dry mandibles were radiography bilaterally using PM 2002 CC panoramic machine. A 20 mm thick aluminium filter was added to the slit collimator to obtain radiographs with acceptable density. The specimens were tilted by 2, 4, 6, 8 and 10 degrees downward with and without radiopaque markers. Radiopaque markers were inserted into the mandibular canals and the mental canals of each side of the specimens to serve as reference image when assessing the radiographs. The obtained results were analyzed statistically. Mandibular canals were significantly more clearly visible in the radiographs with 4 and 6 degree downward position on both sides (P<0.05). Mental foramen were significantly more clearly visible in the was not significant difference between right and left sides. Panoramic radiographs with 4 to 6 degree downward tilting could be valuable in locating the mandibular canal as well as the mental foramen

The correlationship between mandibular radiomorphometric indices in panorama and bone mineral density in Cu-equivalent image of intraoral film

International Nuclear Information System (INIS)

Kim, Jae Duk

2003-01-01

To determine whether the mandibular radiomorphometric indices in panoramic radiography are correlated with the bone mineral density of Cu-equivalent images in intraoral film. The bone mineral density (BMD) of the mandibular premolar area was measured in the Cu-equivalent image of intraoral film. The Panoramic Mandibular Index (PMI) and Mandibular Cortical Width (MCW) were measured in panoramic radiographs of six dry mandibles, and the Pearson correlation between PMI, MCW, and BMD were tested. There were no significant correlations between PMI and BMD (r=0.280), nor between MCW and BMD (r=0.237). The results show that PMI and MCW were poor diagnostic indicators of mandibular BMD in the six dry mandibles used in this study. The correlationship between the mandibular radiomorphometric indices (PMI and MCW) and mandibular BMD needs to be researched further using large in vivo patient samples.

Function impairment and pain after closed treatment of fractures of the mandibular condyle

NARCIS (Netherlands)

Dijkstra, P.U.; Stegenga, B.; de Bont, L.G.; Bos, R.R.

Background: To determine the prognosis of fractures of the mandibular condyle after closed treatment. Methods: Patients (n = 144) with a fracture of the mandibular condyle, all treated closed, were included in the study. Fracture types and position of the fracture parts were determined on

Treating dental crowding with mandibular incisor extraction in an Angle Class I patient

Directory of Open Access Journals (Sweden)

Gislana Braga Machado

2015-06-01

Full Text Available Mandibular dental crowding often encourages patients to seek orthodontic treatment. The orthodontist should decide between protrusion of incisors or decrease in dental volume so as to achieve proper alignment and leveling. The present study reports the treatment of an Angle Class I malocclusion adolescent female brachyfacial patient with severe mandibular dental crowding, increased curve of Spee and deep overbite. The patient was treated with extraction of a mandibular incisor. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

Evaluation of aural manifestations in temporo-mandibular joint dysfunction.

Science.gov (United States)

Sobhy, O A; Koutb, A R; Abdel-Baki, F A; Ali, T M; El Raffa, I Z; Khater, A H

2004-08-01

Thirty patients with temporo-mandibular joint dysfunction were selected to investigate the changes in otoacoustic emissions before and after conservative treatment of their temporo-mandibular joints. Pure tone audiometry, transient-evoked otoacoustic emissions (TEOAE), distortion-product otoacoustic emissions (DPOAE) as well as a tinnitus questionnaire were administered to all patients before and after therapy. Therapy was conservative in the form of counselling, physiotherapy, anti-inflammatory agents, muscle relaxants, and occlusal splints. Results indicated insignificant changes in the TEOAEs, whereas there were significant increases in distortion product levels at most of the frequency bands. These results were paralleled to subjective improvement of tinnitus.

[Combined orthodontic-orthoganthic surgery to treat asymmetric mandibular excess malocclusions].

Science.gov (United States)

Li, Xiao-Bing; Chen, Song; Chen, Yang-Xi; Li, Jun

2005-06-01

To discuss the skeletal and dentoalveolar characteristics of asymmetric mandibular excess malocclusions and to discuss the procedures of combined orthodontic-orthonganthic surgery treatments of asymmetric mandibular excess malocclusions. 25 cases treated by combined orthodontic-orthognathic surgery treatments were reviewed to find out the specialties of this kind of therapy. The asymmetric of mandible presents anterior and posterior teeth tipped both sagitally and horizontally, as well as upper and lower jaws incompatibility. The pre-surgical orthodontic treatments included decomposition of anterior and posterior teeth, leveling and aligning the teeth etc. The post-surgical orthodontic treatments were to detail the occlusions. The patients all got functional and aesthetic good results after the combined orthodontic-orthognathic surgery treatments. The asymmetric mandibular excess affects the harmony of the face badly, and the correction of it must be carried out by the combined orthodontic-orthognathic surgery treatments. The pre- and post-surgical orthodontic treatments are the key stages to make the skeletal corrections stable.

Unexpectedly rapid evolution of mandibular shape in hominins.

Science.gov (United States)

Raia, P; Boggioni, M; Carotenuto, F; Castiglione, S; Di Febbraro, M; Di Vincenzo, F; Melchionna, M; Mondanaro, A; Papini, A; Profico, A; Serio, C; Veneziano, A; Vero, V A; Rook, L; Meloro, C; Manzi, G

2018-05-09

Members of the hominins - namely the so-called 'australopiths' and the species of the genus Homo - are known to possess short and deep mandibles and relatively small incisors and canines. It is commonly assumed that this suite of traits evolved in early members of the clade in response to changing environmental conditions and increased consumption of though food items. With the emergence of Homo, the functional meaning of mandible shape variation is thought to have been weakened by technological advancements and (later) by the control over fire. In contrast to this expectation, we found that mandible shape evolution in hominins is exceptionally rapid as compared to any other primate clade, and that the direction and rate of shape change (from the ape ancestor) are no different between the australopiths and Homo. We deem several factors including the loss of honing complex, canine reduction, and the acquisition of different diets may have concurred in producing such surprisingly high evolutionary rates. This study reveals the evolution of mandibular shape in hominins has strong morpho-functional and ecological significance attached.

Rotational movements of mandibular two-implant overdentures.

Science.gov (United States)

Kimoto, Suguru; Pan, Shaoxia; Drolet, Nicolas; Feine, Jocelyne S

2009-08-01

Clinicians have reported that their patients complain that their mandibular two-implant overdentures (IOD) rotate. Therefore, we studied the frequency and severity of rotation of IODs with two-ball attachments, how rotation may influence perceived satisfaction ratings of chewing ability, and the factors that are involved in the rotation of IODs. Seventy-nine participants were recruited and asked to rate their general satisfaction of their IODs, as well as their ability to chew foods, the existence of any mandibular denture rotation, and to what degree denture rotation bothered them. Data on participant sociodemographic, anatomical, and prosthesis characteristics were also collected. Student's t-test and logistic regression analyses were performed to analyze the differences between participants who did (R group) and did not report (NR group) denture rotation. Thirty-seven of 79 participants were aware of rotational movement in their IODs. These patients were significantly less satisfied with their chewing ability than those who felt no rotation (69.1 mm R group vs. 82.9 mm), and discomfort caused by the rotation bothered them moderately (39/100 mm). The multivariate logistic regression analysis revealed that the arrangement of the anterior teeth and the length of the denture are significantly associated with awareness of denture rotation. Thirty-eight percent in the R group and 31% in the NR group had non-scheduled visits. Rotational movement with a mandibular two-IOD has a negative effect on perceived chewing ability and is associated with anterior tooth arrangement and denture length.

Advanced 65 nm CMOS devices fabricated using ultra-low energy plasma doping

International Nuclear Information System (INIS)

Walther, S.; Lenoble, D.; Lallement, F.; Grouillet, A.; Erokhin, Y.; Singh, V.; Testoni, A.

2005-01-01

For leading edge CMOS and DRAM technologies, plasma doping (PLAD) offers several unique advantages over conventional beamline implantation. For ultra-low energy source and drain extensions (SDE), source drain contact and high dose poly doping implants PLAD delivers 2-5x higher throughput compared to beamline implanters. In this work we demonstrate process performance and process integration benefits enabled by plasma doping for advanced 65 nm CMOS devices. Specifically, p + /n ultra-shallow junctions formed with BF 3 plasma doping have superior X j /R s characteristics to beamline implants and yield up to 30% lower R s for 20 nm X j while using standard spike anneal with ramp-up rate of 75 deg. C/s. These results indicate that PLAD could extend applicability of standard spike anneal by at least one technology node past 65 nm. A CMOS split lot has been run to investigate process integration advantages unique to plasma doping and to determine CMOS device characteristics. Device data measured on 65 nm transistors fabricated with offset spacers indicate that devices with SDE formed by plasma doping have superior V t roll-off characteristics arguably due to improved lateral gate-overlap of PLAD SDE junctions. Furthermore, offset spacers could be eliminated in 65 nm devices with PLAD SDE implants while still achieving V t roll-off and I on -I off performance at least equivalent to control devices with offset spacers and SDE formed by beamline implantation. Thus, another advantage of PLAD is simplified 65 nm CMOS manufacturing process flow due to elimination of offset spacers. Finally, we present process transfer from beamline implants to PLAD for several applications, including SDE and gate poly doping with very high productivity

Endodontic management of mandibular second premolar with three roots and three root canals: A case report

Directory of Open Access Journals (Sweden)

Nidhi Shrivastava

2014-01-01

Full Text Available High level of success in endodontic treatment requires an understanding of root canal anatomy and morphology. The clinician must be prepared to identify those teeth that tend to vary generally from norm. Thorough debridement and obturation of such teeth can be challenging and failing to do so can lead to treatment failure. Mandibular premolars have earned the reputation for having aberrant anatomy. However, the occurrence of three separate canals with three separate foramina in mandibular premolars is very rare. The incidence of three canals is as high as 23% in mandibular first premolars, whereas in second premolars incidence is as low as 0.4%. Three rooted mandibular second premolar is reported to be 0.2%. This case report describes endodontic management of one such tooth with unusual morphological variations in canal anatomy of mandibular second premolar.

Neurovascular structures of the mandibular angle and condyle: a comprehensive anatomical review.

Science.gov (United States)

Yang, Hun-Mu; Won, Sung-Yoon; Kim, Hee-Jin; Hu, Kyung-Seok

2015-11-01

Various surgical interventions including esthetic surgery, salivary gland excision, and open reduction of fracture have been performed in the area around the mandibular angle and condyle. This study aimed to comprehensively review the anatomy of the neurovascular structures on the angle and condyle with recent anatomic and clinical research. We provide detailed information about the branching and distributing patterns of the neurovascular structures at the mandibular angle and condyle, with reported data of measurements and proportions from previous anatomical and clinical research. Our report should serve to help practitioners gain a better understanding of the area in order or reduce potential complications during local procedures. Reckless manipulation during mandibular angle reduction could mutilate arterial branches, not only from the facial artery, but also from the external carotid artery. The transverse facial artery and superficial temporal artery could be damaged during approach and incision in the condylar area. The marginal mandibular branch of the facial nerve can be easily damaged during submandibular gland excision or facial rejuvenation treatment. The main trunk of the facial nerve and its upper and lower distinct divisions have been damaged during parotidectomy, rhytidectomy, and open reductions of condylar fractures. By revisiting the information in the present study, surgeons will be able to more accurately prevent procedure-related complications, such as iatrogenic vascular accidents on the mandibular angle and condyle, complete and partial facial palsy, gustatory sweating (Frey syndrome), and traumatic neuroma after parotidectomy.

Evaluation of Satisfaction Level in Patients With Mandibular Implant Supported Overdentures

Directory of Open Access Journals (Sweden)

Masoumeh khoshhal

2016-01-01

Full Text Available Background Implant-supported overdentures could have many benefits for patients, especially in the lower jaws. As a matter of fact, the most common reason for prescribing mandibular overdenture is dissatisfaction of patients with mandibular dentures usually because of a lack of retention, stability and function and speech difficulties. On the other hand, patients' expectations of overdenture treatments are their main disadvantage. Objectives The aim of this study was to evaluate the satisfaction of patients who had received mandibular implant supported overdenture treatment with different number of implants. Patients and Methods This study was a descriptive cross-sectional study. Twenty-five patients with a mean age of 62.7 years who had received mandibular implant supported overdenture treatment at the dental school of Hamadan University of Medical Sciences were enrolled. Among these patients, six had overdentures supported by one implant, nine had overdentures supported by two implants, two had overdentures supported by three implants, five had overdentures supported by four implants and three had overdentures supported by five implants. The visual analogue scale (VAS questionnaire was used to evaluate the general satisfaction, comfort, esthetic, fitness, satisfaction of chewing and social communication, and the data was analyzed by the analysis of variance (ANOVA test. Results All patients in all five groups were satisfied with their overdentures; however there was no significant relationship between the number of implants and fitness (P = 0.446, esthetic (P = 0.843, comfort (P = 0.805, satisfaction of chewing (P = 0.133, social communication (P = 0.322 and general satisfaction (P = 0.493. Conclusions There was no difference in satisfaction level of patients who had received mandibular overdentures with different number of implants.

Dislocation of a mandibular condyle in the middle cranial fossa, diagnosed 54 years after trauma

OpenAIRE

De Mol, Antoni; Nicolielo, Laura; Ghekiere, Olivier; Jacobs, Reinhilde; Politis, Constantinus

2017-01-01

Abstract Dislocation of the mandibular condyle into the middle cranial fossa is a rare complication of mandibular trauma. We report the remarkable case of a 63-year-old patient in whom trauma 54 years prior to consultation resulted in intrusion of the right mandibular condyle into the middle cranial fossa. The diagnosis was missed because of insufficient data provided by conventional radiographies. Failure of timely diagnosis and lack of appropriate treatment resulted in temporomandibular joi...

Comparative study of single and multislice computed tomography for assessment of the mandibular canal

Directory of Open Access Journals (Sweden)

Adriana da Silva Ferreira Paes

2007-06-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the accuracy of relative measurements from the roof of the mandibular canal to the alveolar crest in multislice (multidetector computed tomography (MDCT and single-slice computed tomography (SSCT. MATERIAL AND METHODS: The sample consisted of 26 printed CT films (7 SSCT and 19 MDCT from the files of the LABI-3D (3D Imaging Laboratory of the School of Dentistry of the University of São Paulo (FOUSP, which had been acquired using different protocols. Two observers analyzed in a randomized and independent order a series of 22 oblique CT reconstructions of each patient. Each observer analyzed the CT scans twice. The length of the mandibular canal and the distance between the mandibular canal roof and the crest of the alveolar ridge were obtained. Dahlberg test was used for statistical analysis. RESULTS: The mean error found for the mandibular canal length measurements obtained from SSCT was 0.53 mm in the interobserver analysis, and 0.38 mm for both observers. On MDCT images, the mean error was 0.0 mm in the interobserver analysis, and 0.0 and 0.23 mm in the intraobserver analysis. Regarding the distance between the mandibular canal roof and the alveolar bone crest, the SSCT images showed a mean error of 1.16 mm in the interobserver analysis and 0.66 and 0.59 mm in the intraobserver analysis. In the MDCT images, the mean error was 0.72 mm in the interobserver analysis and 0.50 and 0.54 mm in the intraobserver analysis. CONCLUSION: Multislice CT was demonstrated a more accurate method and demonstrated high reproducibility in the analysis of important anatomical landmarks for planning of mandibular dental implants, namely the mandibular canal pathway and alveolar crest height.

A mandibular third molar with three mesial roots: a case report.

Science.gov (United States)

Plotino, Gianluca

2008-02-01

Although its most common configuration is 2 roots and 3 root canals, mandibular molars might have many different combinations. A case of unusual root canal morphology is presented to demonstrate anatomic variations in mandibular molars. Endodontic therapy was performed in a mandibular third molar with 3 separate mesial roots. The appearance of the pulp chamber floor revealed 4 separate canal orifices. Radiographically the 4 root canals ended in their own distinct foramen. Many reports deal with 3 orifices or 3 independent canals in the mesial root, but none described 3 mesial canals in 3 separate mesial roots, indicating a rare anatomic configuration. This report points out the importance of looking for additional canals and unusual canal morphology, because knowledge of their existence might occasionally enable clinicians to treat a case successfully that otherwise might have ended in failure.

Orthodontic treatment for a mandibular prognathic girl of short stature under growth hormone therapy

Directory of Open Access Journals (Sweden)

Chin-Yun Pan

2013-12-01

Full Text Available This report presents a case of a 12-year-old girl with maxillary deficiency, mandibular prognathism, and facial asymmetry, undergoing growth hormone (GH therapy due to idiopathic short stature. Children of short stature with or without GH deficiency have a deviating craniofacial morphology with overall smaller dimensions; facial retrognathism, especially mandibular retrognathism; and increased facial convexity. However, a complete opposite craniofacial pattern was presented in our case of a skeletal Class III girl with idiopathic short stature. The orthodontic treatment goal was to inhibit or change the direction of mandibular growth and stimulate the maxillary growth of the girl during a course of GH therapy. Maxillary protraction and mandibular retraction were achieved using occipitomental anchorage (OMA orthopedic appliance in the first stage of treatment. In the second stage, the patient was treated with a fixed orthodontic appliance using a modified multiple-loop edgewise archwire technique of asymmetric mechanics and an active retainer of vertical chin-cup. The treatment led to an acceptable facial profile and obvious facial asymmetry improvement. Class I dental occlusion and coincident dental midline were also achieved. A 3½-year follow-up of the girl at age 18 showed a stable result of the orthodontic and dentofacial orthopedic treatment. Our case shows that the OMA orthopedic appliance of maxillary protraction combined with mandibular retraction is effective for correcting skeletal Class III malocclusion with midface deficiency and mandibular prognathism in growing children with idiopathic short stature undergoing GH therapy.

Impact of mandibular conventional denture and overdenture on quality of life and masticatory efficiency

Directory of Open Access Journals (Sweden)

Rachel Gomes CARDOSO

Full Text Available Abstract The aim of this non-randomized controlled clinical trial was to evaluate the oral health-related quality of life and masticatory efficiency of patients rehabilitated with mandibular two-implant overdentures with immediate loading or conventional dentures. Fifty completely edentulous patients wearing bimaxillary conventional dentures, for at least one year, were recruited. The patients were then assigned to either two treatment groups: mandibular overdentures supported by two implants with bar-clip system and a maxillary conventional denture (n = 25, and new maxillary and mandibular conventional complete dentures (n = 25. Masticatory efficiency and oral health-related quality of life were assessed before and 3 months after denture insertion. The Brazilian version of OHIP-Edent questionnaire was used to assess the oral health-related quality of life. Masticatory efficiency was evaluated with chewing capsules through a colorimetric method. The results revealed fewer oral health–related quality of life problems in patients wearing mandibular two-implant overdentures compared to the conventional dentures group. In addition, the implant overdenture group presented statistically significant improvement in masticatory efficiency (p = 0.001. There was no correlation between masticatory efficiency and OHIP in the implant group (p > 0.05, however a correlation was found in the conventional denture group (p < 0.05. Therefore, these short-term results suggest that mandibular overdenture retained by 2 implants with immediate loading combined with maxillary conventional dentures provide better masticatory efficiency and oral health–related quality of life than mandibular conventional dentures.

Endodontic treatment of an unusual connation of permanent mandibular molars: a case report.

Science.gov (United States)

Liu, Shengbo; Fan, Bing; Peng, Bin; Fan, Mingwen; Bian, Zhuan

2006-10-01

A 27-year-old patient with an anomalous mandibular molar was referred for endodontic therapy. Clinical and radiographic examination revealed the connation of a second mandibular molar with a third molar. Challenging endodontic therapy was performed in the unusual connated molars. A 2-year recall showed good treatment result.

Relationship between mandibular condyle and angle fractures and the presence of mandibular third molars.

Science.gov (United States)

Mah, Deuk-Hyun; Kim, Su-Gwan; Moon, Seong-Yong; Oh, Ji-Su; You, Jae-Seek

2015-02-01

We retrospectively evaluated the impact of mandibular third molars on the occurrence of angle and condyle fractures. This was a retrospective investigation using patient records and radiographs. The sample set consisted of 440 patients with mandibular fractures. Eruption space, depth and angulation of the third molar were measured. Of the 144 angle fracture patients, 130 patients had third molars and 14 patients did not. The ratio of angle fractures when a third molar was present (1.26 : 1) was greater than when no third molar was present (0.19 : 1; odds ratio, 6.58; Pcondyle fractures patients, the third molar was present in 84 patients and absent in 57 patients. The ratio of condyle fractures when a third molar was present (0.56 : 1) was lower than when no third molar was present (1.90 : 1; odds ratio, 0.30; Pfractures with third molars and the ratio of condyle fractures without a third molar were statistically significant. The occurrence of angle and condyle fractures was more affected by the continuity of the cortical bone at the angle than by the depth of a third molar. These results demonstrate that a third molar can be a determining factor in angle and condyle fractures.

A completely CAD/CAM individual transmission device for electronic mandible movement registration.

Science.gov (United States)

Krey, Karl-Friedrich; Kordaß, Bernd; Ruge, Sebastian

The connection of a device for the registration of mandibular movements depends on the coupling of the teeth with a paraocclusal adapter. This is normally done by individualizing a prefabricated metal support, either directly on the patient or in the dental laboratory. The goal was to create an individual paraocclusal adapter by means of additive computer-assisted design/computer-assisted manufacturing (CAD/CAM) procedures, and to test it clinically. Starting from intraoral scans of the maxillary and mandibular teeth, an individual paraocclusal adapter was constructed by combining an adapter piece adapted to the tooth and jaw shape with a prefabricated standard part. This article describes step by step the design using the 3D CAD software, up until production by means of 3D printing. Initial clinical experience is also discussed.

Mandibular Angle Fractures: A Clinical and Biomechanical Comparison-the Works of Ellis and Haug.

Science.gov (United States)

Haug, Richard H; Serafin, Bethany L

2008-11-01

In a series of articles spanning 8 years, Ed Ellis reviewed the clinical results of the treatment of 478 mandibular angle fractures managed by eight different techniques. During a series of benchtop investigations employing polyurethane synthetic mandible replicas, Rich Haug investigated the biomechanical behavior of approximately 15 different techniques designed to reconstruct mandibular angle fractures. This article reviews these two series of investigations in an attempt to gain insight into the biomechanical and biological factors that affect the successful reconstruction of mandibular angle fractures. It appears that the current techniques used to reconstruct mandibular angle fractures are sound from the standpoint of biomechanics within a range of forces encountered during clinical function. It also appears that an unsuccessful reconstruction is based on a biological result of a behavioral issue such as noncompliance, substance abuse, and/or nutritional or immune compromise.

A lower border augmentation technique to allow implant placement after a bilateral mandibular fracture as a complication of vertical distraction osteogenesis: a case report.

Science.gov (United States)

Perdijk, F B T; Meijer, G J; Soehardi, A; Koole, R

2013-07-01

As with other techniques, vertical distraction osteogenesis (VDO) can also induce complications. The case of a patient with a residual alveolar ridge in the symphyseal area of 8 mm is presented. After performing VDO, the patient returned at 1-day postoperatively complaining of pain and dislocation of the distractor device, due to a fracture of the lower mandibular segment on the right side. After removal of the distractor device and application of osteosynthesis plates, the patient returned 2 weeks later due to a second fracture of the lower segment, yet on the left side. After removing the osteosynthesis material, stabilization of the mandible was achieved with an acrylic splint, which was fixated with peri-mandibular wiring. Finally, reconstruction was accomplished by lower border onlay grafting, limited to the symphyseal area, in preparation for implant insertion. Ultimately, after a healing period of 5 months, two endosseous implants were installed. The patient's function has remained satisfactory for 3 years. Reinforcement of the extreme resorbed edentulous mandible after fracture healing by lower border bone augmentation can be a reliable method to allow implant installation in a second stage. Copyright © 2013 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

An indigenous method for closed reduction of pediatric mandibular parasymphysis fracture

OpenAIRE

Kumar, Naresh; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal

2015-01-01

Mandibular fractures in children are very rare as compared to adults due to protected anatomic features of child and less exposure to road traffic accidents. Management becomes complicated due to inherent dynamic nature, instability of mixed dentition and fear of surgery. Conservative management can be done with the help of acrylic cap splints along with circum-mandibular wiring, intermaxillary fixation with eyelet wires, arch wires or open reduction and internal fixation with bio-resorbable ...

Management of Unilaterally Impacted Permanent Mandibular First, Second and Third Molars

Directory of Open Access Journals (Sweden)

Rohit Mehrotra

2014-01-01

Full Text Available This case report describes the treatment of a teenage patient with simultaneous impaction of all three right mandibular permanent molars. The impacted first and second mandibular molars were surgically exposed and orthodontically erupted into good alignment and occlusion while the impacted third molar in the same quadrant was extracted. The unique clinical presentation, various treatment alternatives, the decision making process in finalizing the treatment plan and its clinical implementation are discussed.

Canal configuration of mandibular first premolars in an Egyptian population

Directory of Open Access Journals (Sweden)

Hatem A. Alhadainy

2013-03-01

Full Text Available The purpose of this study was to investigate canal configuration of mandibular first premolars in an Egyptian population. Two hundred fifty human extracted mandibular first premolars were collected from Egyptian patients and a small hole in the center of the occlusal surface of each tooth was made perforating the roof of the pulp chamber. Teeth were decalcified by immersing in nitric acid and dehydrated in ascending concentrations of ethyl alcohol. A waterproof black ink was passively injected from the occlusal hole into pulp system and stained teeth were immersed in methyl salicylate solution for clearing. Standardized pictures of the cleared teeth were obtained and anatomical features of the root canal were observed. The average length of the mandibular first premolar teeth was 22.48 ± 1.74 mm, one-rooted teeth were 96.8% and the two-rooted were 3.2%. Vertucci Type I canal configuration represented the highest percentage (61.2% followed by Type V (16.4%, Type IV (13.2%, Type II (5.6% and Type III (2.8%. Vertucci Type VI canal configuration represented the lowest percentage (0.4% and a complex configuration was found in one tooth. Accessory canals were detected in 22.8% and inter-canal connections were observed in 24.8% while 54% showed apical delta. Such knowledge is clinically useful for localization and negotiation of canals of mandibular first premolar, as well as their subsequent management in Egyptian population.

Prolonged vertigo and ataxia after mandibular nerve block for treatment of trigeminal neuralgia.

Science.gov (United States)

Chaturvedi, Arvind; Dash, Hh

2011-07-01

Common complications of neurolytic mandibular nerve block are hypoesthesia, dysesthesia, and chemical neuritis. We report a rare complication, prolonged severe vertigo and ataxia, after neurolytic mandibular blockade in a patient suffering from trigeminal neuralgia. Coronoid approach was used for right sided mandibular block. After successful test injection with local anesthetic, absolute alcohol was given for neurolytic block. Immediately after alcohol injection, patient developed nausea and vomiting along with severe vertigo, ataxia and hypertension. Neurological evaluation was normal except for the presence of vertigo and ataxia. Computerised tomography scan brain was also normal. Patient was admitted for observation and symptomatic treatment was given. Vertigo and ataxia gradually improved over 24 hours.

Functional anatomy of the temporo-mandibular joint (II).

Science.gov (United States)

Sava, Anca; Scutariu, Monica

2012-01-01

Jaw movement is analyzed as an action between two rigid components jointed together in a particular way, the movable mandible against the stabilized cranium. Opening and closing movements are symmetrical; that is, both sides of the cranio-mandibular articulation are making the same movements. Protrusive and retrusive movements may also be symmetrical. The mandibular muscles determine all the complicated postures and-movements of the jaw. Their behavior can be greatly clarified by restating certain fundamentals crucial to purposive muscular activity. The joint derives its arterial supply from the superficial temporal artery and the maxillary artery. Branches of the auriculo-temporal and masseteric nerves and postganglionic sympathetic nerves supply the tissues associated with the capsular ligament and the looser posterior bilaminar extension of the disc.

Factors contributing to the surgical retreatment of mandibular fractures

Directory of Open Access Journals (Sweden)

João Gualberto de Cerqueira Luz

2013-06-01

Full Text Available The purpose of this retrospective study was to evaluate contributing factors in patients requiring surgical retreatment of mandibular fractures. Of all the patients with mandibular fractures who were treated using internal fixation at a trauma hospital over a seven-year period, 20 patients (4.7% required a second surgery and thus composed the “reoperated” group. The control group comprised 42 consecutive patients with mandibular fractures who were treated at the same clinic and who healed without complications. Medical charts were reviewed for gender, age, substance abuse history, dental condition, etiology, location of fracture, degree of fragmentation, fracture exposure, teeth in the fracture line, associated facial fractures, polytrauma, time elapsed between trauma and initial treatment, surgical approach and fixation system. Statistical analyses were performed using the Statistical Package for Social Sciences (SPSS version 20.0; descriptive statistics and the chi-squared test were used to determine differences between groups. Significant differences in substance abuse (p = 0.006, dental condition (p < 0.001, location of fracture (p = 0.010, degree of fragmentation (p = 0.003 and fracture exposure (p < 0.001 were found. With regard to age and time elapsed between trauma and initial treatment, older patients (31.4 years, SD = 11.1 and a delay in fracture repair (19.1 days, SD = 18.7 were more likely to be associated with reoperation. It was concluded that substance abuse, age, dental condition, location of fracture, degree of fragmentation, fracture exposure and the time between trauma and initial treatment should be considered contributing factors to the occurrence of complications that require surgical retreatment of mandibular fractures.

IAEA technical meeting on nuclear data library for advanced systems - Fusion devices

International Nuclear Information System (INIS)

Forrest, R.; Mengoni, A.

2008-04-01

A Technical Meeting on 'Nuclear Data Library for Advanced Systems - Fusion Devices' was held at the IAEA Headquarters in Vienna from 31 October to 2 November 2007. The main objective of the initiative has been to define a proposal and detailed plan of activities for a Co-ordinated Research Project on this subject. Details of the discussions which took place at the meeting, including a review of the current activities in the field, a list of recommendations and a proposed timeline schedule for the CRP are summarized in this report. (author)

Management of mandibular body fractures in pediatric patients: A case report with review of literature

OpenAIRE

Baby John; Reena R John; A Stalin; Indumathi Elango

2010-01-01

Mandibular fractures are relatively less frequent in children when compared to adults, which may be due to the child's protected anatomic features and infrequent exposure of children to alcohol related traffic accidents. Treatment principles of mandibular fractures differ from that of adults due to concerns regarding mandibular growth and development of dentition. A case of a 4.5-year-old boy with fractured body of mandible managed by closed reduction using open occlusal acrylic splint and ci...

Cephalometric analysis of the middle part of the face in patients with mandibular prognathism.

Science.gov (United States)

Cutović Tatjana; Jović, Nebojsa; Kozomara, Ruzica; Radojicić, Julija; Janosević, Mirjana; Mladenović, Irena; Matijević, Stevo

2014-11-01

The middle part of the face, that is the maxilla, has always been mentioned as a possible etiologic factor of skeletal Class III. However, the importance of the relationship of maxillary retroposition towards the cranial base is still unclear, although it has been examined many times. The aim of this study was to conduct cephalometric analysis of the morphology of maxilla, including the whole middle part of the face in patients with divergent and convergent facial types of mandibular prognathism, as well as to determine differences betweeen them. Lateral cephalometric teleradiograph images of 90 patients were analyzed at the Dental Clinic of the Military Medical Academy, Belgrade, Serbia. All the patients were male, aged 18-35 years, not previously treated orthodontically. On the basis of dentalskeletal relations of jaws and teeth, the patients were divided into three groups: the group P1 (patients with divergent facial type of mandibular prognathism), P2 (patients with convergent facial type of mandibular pragmathism) and the group E (control group or eugnathic patients). A total of 9 cephalometric parameters related to the middle face were measured and analyzed: the length of the hard palate--SnaSnp, the length of the maxillary corpus--AptmPP, the length of the soft palate, the angle between the hard and soft palate--SnaSnpUt, the angle of inclination of the maxillary alveolar process, the angle of inclination of the upper front teeth, the effective maxillary length--CoA, the posterior maxillary alveolar hyperplasia--U6PP and the angle of maxillary prognathism. The obtained results showed that the CoA, AptmPP and SnaSnp were significally shorter in patients with divergent facial type of mandibular prognathism compared to patients with convergent facial type of the mandibular prognathism and also in both experimental groups of patients compared to the control group. SnaSnp was significantly shorter in patients with divergent facial type of mandibular prognathism

Influence of soft tissues on mandibular gray scale levels Influência dos tecidos moles sobre os níveis de cinza mandibulares

Directory of Open Access Journals (Sweden)

Paulo Henrique Couto Souza

2004-03-01

Full Text Available The purpose of this study was to analyze the gray levels, expressed in pixels, of the mandibular retromolar region, with regard to the influence of muscular and fat soft tissues near this region. Fifteen dry mandibles were X-rayed with the presence of soft tissue simulators. The radiographs were digitized and evaluated by Digora® software. A one cm thick layer of wax was used as a simulator of the muscular soft tissue. Animal fat samples of different thicknesses - 0.5, 1.0, 1.5 and 2.0 cm - were used as a simulator of the fat soft tissue. Results showed that the fat soft tissue simulator influenced the gray level values in pixels of the mandibular retromolar region when analyzed in different thicknesses using the Digora® digitized image software.O presente trabalho foi desenvolvido com o objetivo de analisar os níveis de cinza, expressos em "pixels", da região retromolar mandibular, considerando a influência dos tecidos moles muscular e, principalmente, adiposo adjacentes a essa região. Para o estudo, 15 mandíbulas secas foram tecnicamente radiografadas, sendo que as radiografias obtidas foram escaneadas e avaliadas pelo programa de imagens digitalizadas Digora®. Como simuladores dos tecidos muscular e adiposo, foram utilizadas cera utilidade na espessura de 1,0 cm e amostras de gordura animal em espessuras diferentes de 0,5; 1,0; 1,5 e 2,0 cm. Os resultados mostraram que o tecido adiposo foi capaz de influenciar a análise dos valores de níveis de cinza em "pixels" da região retromolar mandibular quando estudado em espessuras diferentes pelo programa de imagens digitalizadas Digora®.

Digital design of scaffold for mandibular defect repair based on tissue engineering.

Science.gov (United States)

Liu, Yun-feng; Zhu, Fu-dong; Dong, Xing-tao; Peng, Wei

2011-09-01

Mandibular defect occurs more frequently in recent years, and clinical repair operations via bone transplantation are difficult to be further improved due to some intrinsic flaws. Tissue engineering, which is a hot research field of biomedical engineering, provides a new direction for mandibular defect repair. As the basis and key part of tissue engineering, scaffolds have been widely and deeply studied in regards to the basic theory, as well as the principle of biomaterial, structure, design, and fabrication method. However, little research is targeted at tissue regeneration for clinic repair operations. Since mandibular bone has a special structure, rather than uniform and regular structure in existing studies, a methodology based on tissue engineering is proposed for mandibular defect repair in this paper. Key steps regarding scaffold digital design, such as external shape design and internal microstructure design directly based on triangular meshes are discussed in detail. By analyzing the theoretical model and the measured data from the test parts fabricated by rapid prototyping, the feasibility and effectiveness of the proposed methodology are properly verified. More works about mechanical and biological improvements need to be done to promote its clinical application in future.

Digital design of scaffold for mandibular defect repair based on tissue engineering

Institute of Scientific and Technical Information of China (English)

Yun-feng LIU; Fu-dong ZHU; Xing-tao DONG; Wei PENG

2011-01-01

Mandibular defect occurs more frequently in recent years,and clinical repair operations via bone transplantation are difficult to be further improved due to some intrinsic flaws.Tissue engineering,which is a hot research field of biomedical engineering,provides a new direction for mandibular defect repair.As the basis and key part of tissue engineering,scaffolds have been widely and deeply studied in regards to the basic theory,as well as the principle of biomaterial,structure,design,and fabrication method.However,little research is targeted at tissue regeneration for clinic repair operations.Since mandibular bone has a special structure,rather than uniform and regular structure in existing studies,a methodology based on tissue engineering is proposed for mandibular defect repair in this paper.Key steps regarding scaffold digital design,such as external shape design and internal microstructure design directly based on triangular meshes are discussed in detail.By analyzing the theoretical model and the measured data from the test parts fabricated by rapid prototyping,the feasibility and effectiveness of the proposed methodology are properly verified.More works about mechanical and biological improvements need to be done to promote its clinical application in future.

Evaluation of Pound concept in determination of mediolateral mandibular posterior teeth position

Directory of Open Access Journals (Sweden)

Majid Naser Khaki

2017-03-01

Full Text Available Background: The ideal teeth arrangement is an important step for success in complete denture fabrication. There are different methods for determining the posterior denture teeth location. The purpose of this study was the comparison of posterior mandibular teeth location in the study group with Pound or Misch theory. Material and methods: An alginate mandibular impression of 80 dentate patients was taken and poured with dental stone. Retromolar pad area, mesial of canine and the lingual cusps of each posterior tooth marked on the cast and then transferred to the graded paper. Distance of each lingual cusp from the internal line of Pound triangle was measured. Data were analyzed with SPSS version 16.0. Result: In the study group, the average distance of lingual mandibular cusp from the internal line of Pound triangle was 1.69 mm in first premolars, 0.94 mm in second premolars, 0.7 mm in first molars and 0.75 mm in second molars. Conclusion: In most cases, distance of lingual mandibular cusps was within 1 mm of Pound triangle. Results were more similar to the Pound rather than the Misch theory.

Using the T-scan III system to analyze occlusal function in mandibular reconstruction patients: A pilot study

Directory of Open Access Journals (Sweden)

Chao-Wei Liu

2015-02-01

Full Text Available Background: This study was designed to analyze the post-rehabilitation occlusal function of subjects treated with complex mandibular resection and subsequently rehabilitated with fibula osteoseptocutaneous flaps, dental implants, and fixed prostheses utilizing the T-scan system. Methods: Ten mandibular complex resection cases that adopted fibula osteoseptocutaneous flaps, dental implants, and fixed prostheses to reconstruct occlusal function were analyzed. The mandibular reconstructions were divided into three groups based on size: full mandibular reconstructions, mandibular reconstructions larger than half of the arch, and mandibular reconstructions smaller than half of the arch. The T-scan III system was used to measure maximum occlusal force, occlusal time, anterior-posterior as well as left-right occlusal force asymmetries, and anterior-posterior as well as left-right asymmetrical locations of occlusal centers. Results: Subjects with larger mandibular reconstructions and dental implants with fixed partial dentures demonstrated decreased average occlusal force; however, the difference did not reach the statistically significant level (p > 0.05. The most significant asymmetry of occlusal center location occurred among subjects with mandibular reconstructed areas larger than half of the mandibular arch. Conclusions: Comparison of the parameters of T-scan system used to analyze the occlusal function showed that the occlusal force was not an objective reference. Measurements of the location of the occlusal center appeared more repeatable, and were less affected by additional factors. The research results of this study showed that the size of a reconstruction did not affect the occlusal force after reconstruction and larger reconstructed areas did not decrease the average occlusal force. The most significant parameter was left and right asymmetry of the occlusion center (LROC and was measured in subjects with reconstruction areas larger than half

Posterior Mandibular Ridge Resorption Associated with Different Retentive Systems for Overdentures: A 7-Year Retrospective Preliminary Study.

Science.gov (United States)

Elsyad, Moustafa Abdou; Mohamed, Shahinaz Sayed; Shawky, Ahmad Fathalla

This retrospective study compared posterior mandibular residual ridge resorption with two different retentive mechanisms for overdentures after 7 years. A convenience sample of 18 edentulous men was assigned to one of two equal groups. Two implants were placed in the mandibular canine areas for each patient using the conventional two-stage surgical protocol, and the implants were splinted with a round bar 3 months later. New mandibular overdentures were then connected to the bars with clips (clip-retained overdentures, CR group) or resilient liners (resilient liner-retained overdentures, RR group). Posterior mandibular ridge resorption (PMRR) was recorded using proportional measurements and posterior area index (PAI) on panoramic radiographs taken immediately after overdenture insertion (T 0 ) and 7 years later (T 7 ). A linear regression model was used to verify the relationship between PAI and the following considerations: attachment type, age, initial mandibular ridge height, period of mandibular edentulism, number of previously worn dentures, and relining events. After 7 years, the RR group demonstrated a significantly (P = .014) higher change in PAI (0.11 ± 0.02) than the CR group (0.06 ± 0.04). The average PMRR for each mm of posterior mandibular ridge was 0.79 mm (0.11 mm/year) in the CR group and 1.4 mm (0.2 mm/year) in the RR group. Attachment type, initial mandibular ridge height, and relining times were significantly correlated with change in the PAI (P = .004, P = .035, and P = .045, respectively). Within the limitations of this preliminary study's design, it was observed that following a 7-year period of use, resilient liner attachments for bar/implant-retained overdentures appear to be associated with greater posterior mandibular ridge resorption when compared to clip attachments.

Magnet sorting algorithms for insertion devices for the Advanced Light Source

International Nuclear Information System (INIS)

Humphries, D.; Hoyer, E.; Kincaid, B.; Marks, S.; Schlueter, R.

1994-01-01

Insertion devices for the Advanced Light Source (ALS) incorporate up to 3,000 magnet blocks each for pole energization. In order to minimize field errors, these magnets must be measured, sorted and assigned appropriate locations and orientation in the magnetic structures. Sorting must address multiple objectives, including pole excitation and minimization of integrated multipole fields from minor field components in the magnets. This is equivalent to a combinatorial minimization problem with a large configuration space. Multi-stage sorting algorithms use ordering and pairing schemes in conjunction with other combinatorial methods to solve the minimization problem. This paper discusses objective functions, solution algorithms and results of application to magnet block measurement data

Assessment of Growth Using Mandibular Canine Calcification Stages and Its Correlation with Modified MP3 Stages.

Science.gov (United States)

Nayak, Reshma; Nayak, Us Krishna; Hegde, Gautam

2010-01-01

Orthodontic diagnosis and treatment planning for growing children must involve growth prediction, especially in the treatment of skeletal problems. Studies have shown that a strong association exists between skeletal maturity and dental calcification stages. The present study was therefore taken up to provide a simple and practical method for assessing skeletal maturity using a dental periapical film and standard dental X-ray machine, to compare the developmental stages of the mandibular canine with that of developmental stages of modified MP3 and to find out if any correlation exists, to determine if the developmental stages of the mandibular canine alone can be used as a reliable indicator for assessment of skeletal maturity. A total of 160 periapical radiographs (80 males and 80 females), of the mandibular right canine and the MP3 region was taken and assessed according to the Dermirjian's stages of dental calcification and the modified MP3 stages. The correlation between the developmental stages of MP3 and the mandibular right canine in male and female groups, is of high statistical significance (p = 0.001). The correlation coefficient between MP3 stages and developmental stages of mandibular canine and chronological age in male and females was found to be not significant. The correlation between the mandibular canine calcification stages and MP3 stages was found to be significant. The developmental stages of the mandibular canine could be used very reliably as a sole indicator for assessment of skeletal maturity.

Cytomegalovirus induces abnormal chondrogenesis and osteogenesis during embryonic mandibular development

Directory of Open Access Journals (Sweden)

Bringas Pablo

2008-03-01

Full Text Available Abstract Background Human clinical studies and mouse models clearly demonstrate that cytomegalovirus (CMV disrupts normal organ and tissue development. Although CMV is one of the most common causes of major birth defects in humans, little is presently known about the mechanism(s underlying CMV-induced congenital malformations. Our prior studies have demonstrated that CMV infection of first branchial arch derivatives (salivary glands and teeth induced severely abnormal phenotypes and that CMV has a particular tropism for neural crest-derived mesenchyme (NCM. Since early embryos are barely susceptible to CMV infection, and the extant evidence suggests that the differentiation program needs to be well underway for embryonic tissues to be susceptible to viral infection and viral-induced pathology, the aim of this study was to determine if first branchial arch NCM cells are susceptible to mCMV infection prior to differentiation of NCM derivatives. Results E11 mouse mandibular processes (MANs were infected with mouse CMV (mCMV for up to 16 days in vitro. mCMV infection of undifferentiated embryonic mouse MANs induced micrognathia consequent to decreased Meckel's cartilage chondrogenesis and mandibular osteogenesis. Specifically, mCMV infection resulted in aberrant stromal cellularity, a smaller, misshapen Meckel's cartilage, and mandibular bone and condylar dysmorphogenesis. Analysis of viral distribution indicates that mCMV primarily infects NCM cells and derivatives. Initial localization studies indicate that mCMV infection changed the cell-specific expression of FN, NF-κB2, RelA, RelB, and Shh and Smad7 proteins. Conclusion Our results indicate that mCMV dysregulation of key signaling pathways in primarily NCM cells and their derivatives severely disrupts mandibular morphogenesis and skeletogenesis. The pathogenesis appears to be centered around the canonical and noncanonical NF-κB pathways, and there is unusual juxtaposition of abnormal stromal

Cone-beam computed tomography study of root and canal morphology of mandibular premolars in a western Chinese population

International Nuclear Information System (INIS)

Yu, Xuan; Guo, Bin; Li, Ke-Zeng; Zhang, Ru; Tian, Yuan-Yuan; Wang, Hu; DDS, Tao Hu

2012-01-01

Traditional radiography is limited in its ability to give reliable information on the number and morphology of root canals. The application of cone-beam computed tomography (CBCT) provides a non-invasive three-dimensional confirmatory diagnosis as a complement to conventional radiography. The aim of this study was to evaluate the root and canal morphology of mandibular premolars in a western Chinese population using CBCT scanning. The sample included 149 CBCT images comprising 178 mandibular first premolars and 178 second premolars. The tooth position, number of roots and canals, and canal configuration according to Vertucci’s classification were recorded. The results showed that 98% of mandibular first premolars had one root and 2% had two roots; 87.1% had one canal, 11.2% had two canals and 0.6% had three canals. The prevalence of C-shaped canals was 1.1%. All mandibular second premolars had one root; 97.2% had one canal and 2.2% had two canals. The prevalence of C-shaped canals was 0.6%. The prevalence of multiple canals in mandibular first premolars was mainly of Type V, and mandibular second premolars had a low rate of canal variation in this western Chinese population. Root canal bifurcation occurred at the middle or apical third in most bicanal mandibular premolars. CBCT scanning can be used in the management of mandibular premolars with complex canal morphology

Endodontic Treatment of a Mandibular Second Premolar with Three Roots and Three Canals

Directory of Open Access Journals (Sweden)

Bonny Paul

2014-01-01

Full Text Available Complex root canal system with atypical variations is a common finding among mandibular premolars. Endodontic treatment in these teeth may not be successful due to the failure to recognise and treat multiple canals. This paper presents endodontic treatment of a mandibular second premolar with three roots and three canals.

Pearls of Mandibular Trauma Management

OpenAIRE

Koshy, John C.; Feldman, Evan M.; Chike-Obi, Chuma J.; Bullocks, Jamal M.

2010-01-01

Mandibular trauma is a common problem seen by plastic surgeons. When fractures occur, they have the ability to affect the patient's occlusion significantly, cause infection, and lead to considerable pain. Interventions to prevent these sequelae require either closed or open forms of reduction and fixation. Physicians determining how to manage these injuries should take into consideration the nature of the injury, background information regarding the patient's health, and the patient's comorbi...

An endodontic management of mandibular third molar with five root canals

OpenAIRE

Dakshita Joy Sinha; Ashish Amit Sinha

2014-01-01

The existence of several anatomical variations in the root canal system may contribute to failure of the root canal therapy. The planning and performing of endodontic therapy requires knowledge of the internal dental morphology. This paper reports the case of a left mandibular third molar that presented with five root canals; a case of unusual root canal morphology so as to demonstrate the anatomic variations in mandibular third molars. Root canal therapy and case management are described. Th...

A study of the eruption of the mandibular first permanent molar

OpenAIRE

河野, 美砂子; Kohno, Misako

1995-01-01

The object of this study was to know what positional changes of the mandibular first permanent molars occur just before their gingival emergence. The eruptive process of the mandibular first molars was investigated during the period from alveolareruption to preoraleruption. The subjects were 14 patients whose second primary molars were prematurely lost in one side and remained on the other side. Longitudinal oblique cephalograms were used to estimate the eruptive process of the first molars o...

Accuracy of Dolphin visual treatment objective (VTO prediction software on class III patients treated with maxillary advancement and mandibular setback

Directory of Open Access Journals (Sweden)

Robert J. Peterman

2016-06-01

Full Text Available Abstract Background Dolphin® visual treatment objective (VTO prediction software is routinely utilized by orthodontists during the treatment planning of orthognathic cases to help predict post-surgical soft tissue changes. Although surgical soft tissue prediction is considered to be a vital tool, its accuracy is not well understood in tow-jaw surgical procedures. The objective of this study was to quantify the accuracy of Dolphin Imaging’s VTO soft tissue prediction software on class III patients treated with maxillary advancement and mandibular setback and to validate the efficacy of the software in such complex cases. Methods This retrospective study analyzed the records of 14 patients treated with comprehensive orthodontics in conjunction with two-jaw orthognathic surgery. Pre- and post-treatment radiographs were traced and superimposed to determine the actual skeletal movements achieved in surgery. This information was then used to simulate surgery in the software and generate a final soft tissue patient profile prediction. Prediction images were then compared to the actual post-treatment profile photos to determine differences. Results Dolphin Imaging’s software was determined to be accurate within an error range of +/− 2 mm in the X-axis at most landmarks. The lower lip predictions were most inaccurate. Conclusions Clinically, the observed error suggests that the VTO may be used for demonstration and communication with a patient or consulting practitioner. However, Dolphin should not be useful for precise treatment planning of surgical movements. This program should be used with caution to prevent unrealistic patient expectations and dissatisfaction.

Assessment of simulated mandibular condyle bone lesions by cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Marques, Alexandre Perez; Perrella, Andreia; Arita, Emiko Saito; Pereira, Marlene Fenyo Soeiro de Matos; Cavalcanti, Marcelo de Gusmao Paraiso, E-mail: alexperez34@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Faculdade de Odontologia. Dept. de Estomatologia

2010-10-15

There are many limitations to image acquisition, using conventional radiography, of the temporomandibular joint (TMJ) region. The Computed Tomography (CT) scan is a better option, due to its higher accuracy, for purposes of diagnosis, surgical planning and treatment of bone injuries. The aim of the present study was to analyze two protocols of cone beam computed tomography for the evaluation of simulated mandibular condyle bone lesions. Spherical lesions were simulated in 30 dry mandibular condyles, using dentist drills and drill bits sizes 1, 3 and 6. Each of the mandibular condyles was submitted to cone beam computed tomography (CBCT) using two protocols: axial, coronal and sagittal multiplanar reconstruction (MPR); and sagittal plus coronal slices throughout the longitudinal axis of the mandibular condyles. For these protocols, 2 observers analyzed the CBCT images independently, regarding the presence or not of injuries. Only one of the observers, however, performed on 2 different occasions. The results were compared to the gold standard, evaluating the percentage of agreement, degree of accuracy of CBCT protocols and observers' examination. The z test was used for the statistical analysis. The results showed there were no statistically significant differences between the 2 protocols. There was greater difficulty in the assessment of small-size simulated lesions (drill no.1). From the results of this study, it can be concluded that CBCT is an accurate tool for analyzing mandibular condyle bone lesions, with the MPR protocol showing slightly better results than the sagittal plus coronal slices throughout the longitudinal axis. (author)

Advanced light emitting device structures for optoelectronic applications

International Nuclear Information System (INIS)

Kovac, J.

2002-01-01

Several factors are driving the recent development of light emitting devices (LED,s). The most important ones are brightness, available efficiency, architecture form flexibility, rugged construction and low applied voltages. These are contributing to growth in markets such as traffic lights, automotive brake signals and instrument displays, video displays, traffic signals, decorative signs and the many uses of the new white LED-based products. A new developments are directed to various materials used for high brightness HB-LED,s based on AlGaAs (red), AlInGaP (yellow-green to red) and InGaN (blue, green and white) devices. The development of LED,s depends on epitaxial growth advances, mainly molecular beam epitaxy (MBE) and metalorganic vapor phase epitaxy (MOVPE). As a technology improved, the performace of visible LED,s increased at the rate 10x per decade from less than 0.1 lm/W to the best red and orange LED,s now providing about 100 lm/W. The main engineering challenge is now the extraction or the ability to get all the light out of the chip to where it is needed. This has led to novel changes in the shape of the LED chip and to the replacement of GaAs with transparent GaP substrate throught wafer bonding after the LED has been produced. Most of the focus for nitride devices (InGaN) is to develop improved or new substrate materials to replace sapphire and enable the growth of lower defect density materials. Organic LED,s (OLED,s) have been undergone dramatic improvements in performace in the last five years. Two main technologies for OLED,s have emerged in the last decade, either based on conjaguated polymers, or sublimed films of small molecules. Recent improvements have taken OLED,s to luminous efficiency greater than 20 lm/W. However, in contrast to conventional LED,s, OLED,s share many of the properties associated with other organic substances and polymers. They allow more design flexibility than inorganic LED,s and thus lead to the high

Pyogenic granuloma associated with mandibular odontoma.

Directory of Open Access Journals (Sweden)

Karla Ocampo

2014-08-01

Full Text Available Background: pyogenic granuloma is a kind of inflammatory hyperplasia of multifactorial origin, which is usually related to trauma or constant irritation, drug use, hormonal factors, among others. Meanwhile the odontoma is a benign tumor odontogenic composed of epithelial and mesenchymal cells, their development is usually associated with trauma, infections, inherited disorders or hyperactivity odontoblast. Objectives: The objective is to present the clinical case of a patient that presented a case of pyogenic granuloma related to the presence of a mandibular odontoma, and therapeutic management and postoperative results. Case report: The case shows a female patient of 32 years old with a history of multinodular goiter and hypothyroidism, developing a mandibular odontoma of the left side associated with pyogenic granuloma in the same area, which was treated with surgical excision and reconstructed affected tissues with lyophilized bone and collagen membrane. Favorable outcome after surgery without evidence of recurrence, with proper osseointegration of alloplastic materials and soft tissues. Conclusions: The irritant effect of the presence of a tumor (odontoma in developing confirmed pyogenic granuloma.

Accuracy of perioperative mandibular positions in orthognathic surgery.

Science.gov (United States)

Borba, A M; Ribeiro-Junior, O; Brozoski, M A; Cé, P S; Espinosa, M M; Deboni, M C Z; Miloro, M; Naclério-Homem, M G

2014-08-01

Mandibular position is an important parameter used for the diagnosis of dentofacial deformities, as well as for orthognathic surgery planning and execution. Centric relation (anterior and superior relationship of the mandibular condyles interposed by the thinnest portion of their disks against the articular eminencies), centric occlusion (when lower teeth contact upper teeth at centric relation), and maximal intercuspation (complete interdigitation of lower and upper teeth) are not often addressed as factors that influence the results of orthognathic surgery, although these relationships are critical to ensure accuracy during the surgery. The present study assessed occlusal measurements taken before and after the induction of general anaesthesia from consecutive orthognathic surgery subjects. The variables assessed included the differences between these occlusal measurements, patient age, gender, type of deformity, and type of proposed orthognathic surgical procedure. The results demonstrated statistically significant differences for mandibular retrusion from maximal intercuspation to centric occlusion position, whereas the mandible appeared not to change significantly from centric occlusion after the induction of general anaesthesia. Patient age and the type of deformity appeared to influence the results. While in most instances centric occlusion can be adequately reproduced under general anaesthesia, for some specific orthognathic cases more accurate results might be obtained if the mandible-first sequence is used. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Mandibular transformations in prepubertal patients following treatment for craniofacial microsomia: thin-plate spline analysis.

Science.gov (United States)

Hay, A D; Singh, G D

2000-01-01

To analyze correction of mandibular deformity using an inverted L osteotomy and autogenous bone graft in patients exhibiting unilateral craniofacial microsomia (CFM), thin-plate spline analysis was undertaken. Preoperative, early postoperative, and approximately 3.5-year postoperative posteroanterior cephalographs of 15 children (age 10+/-3 years) with CFM were scanned, and eight homologous mandibular landmarks digitized. Average mandibular geometries, scaled to an equivalent size, were generated using Procrustes superimposition. Results indicated that the mean pre- and postoperative mandibular configurations differed statistically (PThin-plate spline analysis indicated that the total spline (Cartesian transformation grid) of the pre- to early postoperative configuration showed mandibular body elongation on the treated side and inferior symphyseal displacement. The affine component of the total spline revealed a clockwise rotation of the preoperative configuration, whereas the nonaffine component was responsible for ramus, body, and symphyseal displacements. The transformation grid for the early and late postoperative comparison showed bilateral ramus elongation. A superior symphyseal displacement contrasted with its earlier inferior displacement, the affine component had translocated the symphyseal landmarks towards the midline. The nonaffine component demonstrated bilateral ramus lengthening, and partial warps suggested that these elongations were slightly greater on the nontreated side. The affine component of the pre- and late postoperative comparison also demonstrated a clockwise rotation. The nonaffine component produced the bilateral ramus elongations-the nontreated side ramus lengthening slightly more than the treated side. It is concluded that an inverted L osteotomy improves mandibular morphology significantly in CFM patients and permits continued bilateral ramus growth. Copyright 2000 Wiley-Liss, Inc.

The relationship between the changes in three-dimensional facial morphology and mandibular movement after orthognathic surgery.

Science.gov (United States)

Kim, Dae-Seung; Huh, Kyung-Hoe; Lee, Sam-Sun; Heo, Min-Suk; Choi, Soon-Chul; Hwang, Soon-Jung; Yi, Won-Jin

2013-10-01

The purpose of this study was to investigate the relationship between changes in three-dimensional (3D) facial morphology and mandibular movement after orthognathic surgery. We hypothesized that facial morphology changes after orthognathic surgery exert effects on 3D mandibular movement. We conducted a prospective follow-up study of patients who had undergone orthognathic surgical procedures. Three-dimensional facial morphological values were measured from facial CT images before and three months after orthognathic surgery. Three-dimensional maximum mandibular opening (MMO) values of four points (bilateral condylions, infradentale, and pogonion) were also measured using a mandibular movement tracking and simulation system. The predictor variables were changes in morphological parameters divided into two groups (deviated side (DS) or contralateral side (CS) groups), and the outcome variables were changes in the MMO at four points. We evaluated 21 subjects who had undergone orthognathic surgical procedures. Alterations in the TFH (total facial height), LFH (lower facial height), CS MBL (mandibular body length), and DS RL (ramus length) were negatively correlated with changes in bilateral condylar movement. The UFH, DS MBL and CS ML (mandibular length) showed correlations with infradentale movement. The CS ML, DS ML, MBL, UFH, and SNB were correlated with pogonion movement. The height of the face is most likely to affect post-operative mandibular movement, and is negatively correlated with movement changes in the condyles, infradentale and pogonion. The changes in CS morphological parameters are more correlated with mandibular movement changes than the DS. The changes in CS MBL and bilateral RL were negatively correlated with condylar movement changes, while the bilateral MBL and CS ML were positively correlated with changes in infradentale and pogonion. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights

Evaluation of ExPress glaucoma filtration device in Indian patients with advanced glaucoma

Directory of Open Access Journals (Sweden)

Dewang Angmo

2015-01-01

Full Text Available ExPress glaucoma filtration device (GFD has recently become available in India as a surgical option for glaucoma patients. We retrospectively evaluated the outcome of ExPress GFD in 12 eyes with advanced glaucoma with intraocular pressures (IOPs not controlled on maximal tolerable medical therapy. The mean preoperative IOP of 29.58 ± 7.13 mmHg decreased to 17.0 ± 2.67 and 17.40 ± 0.89 mmHg at 6 and 12 months after surgery. Absolute success (IOP ≤ 18 mmHg, with no additional glaucoma medications was achieved in eight cases (66.7% and qualified success (IOP ≤ 18 mmHg, with additional glaucoma medications in two cases (16.7% at 1-year after surgery. Early intervention was needed in 4 patients; two underwent anterior chamber reformation while the other two required needling. Two patients required resurgery. There was no significant change in the best corrected visual acuity postoperatively (P = 0.37. ExPress GFD does not seem to offer a benefit over standard trabeculectomy in patients with advanced glaucomatous disease in terms of IOP control or complication rate. However, due to the small sample size with a heterogeneous mixture of primary and secondary glaucoma′s, we await further studies with a larger sample size and long-term follow-up, to see how the device performs.

Evaluation of ExPress glaucoma filtration device in Indian patients with advanced glaucoma.

Science.gov (United States)

Angmo, Dewang; Sharma, Reetika; Temkar, Shreyas; Dada, Tanuj

2015-05-01

ExPress glaucoma filtration device (GFD) has recently become available in India as a surgical option for glaucoma patients. We retrospectively evaluated the outcome of ExPress GFD in 12 eyes with advanced glaucoma with intraocular pressures (IOPs) not controlled on maximal tolerable medical therapy. The mean preoperative IOP of 29.58 ± 7.13 mmHg decreased to 17.0 ± 2.67 and 17.40 ± 0.89 mmHg at 6 and 12 months after surgery. Absolute success (IOP ≤ 18 mmHg, with no additional glaucoma medications) was achieved in eight cases (66.7%) and qualified success (IOP ≤ 18 mmHg, with additional glaucoma medications) in two cases (16.7%) at 1-year after surgery. Early intervention was needed in 4 patients; two underwent anterior chamber reformation while the other two required needling. Two patients required resurgery. There was no significant change in the best corrected visual acuity postoperatively (P = 0.37). ExPress GFD does not seem to offer a benefit over standard trabeculectomy in patients with advanced glaucomatous disease in terms of IOP control or complication rate. However, due to the small sample size with a heterogeneous mixture of primary and secondary glaucoma's, we await further studies with a larger sample size and long-term follow-up, to see how the device performs.

A novel computer algorithm for modeling and treating mandibular fractures: A pilot study.

Science.gov (United States)

Rizzi, Christopher J; Ortlip, Timothy; Greywoode, Jewel D; Vakharia, Kavita T; Vakharia, Kalpesh T

2017-02-01

To describe a novel computer algorithm that can model mandibular fracture repair. To evaluate the algorithm as a tool to model mandibular fracture reduction and hardware selection. Retrospective pilot study combined with cross-sectional survey. A computer algorithm utilizing Aquarius Net (TeraRecon, Inc, Foster City, CA) and Adobe Photoshop CS6 (Adobe Systems, Inc, San Jose, CA) was developed to model mandibular fracture repair. Ten different fracture patterns were selected from nine patients who had already undergone mandibular fracture repair. The preoperative computed tomography (CT) images were processed with the computer algorithm to create virtual images that matched the actual postoperative three-dimensional CT images. A survey comparing the true postoperative image with the virtual postoperative images was created and administered to otolaryngology resident and attending physicians. They were asked to rate on a scale from 0 to 10 (0 = completely different; 10 = identical) the similarity between the two images in terms of the fracture reduction and fixation hardware. Ten mandible fracture cases were analyzed and processed. There were 15 survey respondents. The mean score for overall similarity between the images was 8.41 ± 0.91; the mean score for similarity of fracture reduction was 8.61 ± 0.98; and the mean score for hardware appearance was 8.27 ± 0.97. There were no significant differences between attending and resident responses. There were no significant differences based on fracture location. This computer algorithm can accurately model mandibular fracture repair. Images created by the algorithm are highly similar to true postoperative images. The algorithm can potentially assist a surgeon planning mandibular fracture repair. 4. Laryngoscope, 2016 127:331-336, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Oral appliance therapy versus nasal continuous positive airway pressure in obstructive sleep apnoea syndrome: a randomised, placebo-controlled trial on self-reported symptoms of common sleep disorders and sleep-related problems

NARCIS (Netherlands)

Nikolopoulou, M.; Byraki, A.; Ahlberg, J.; Heymans, M. W.; Hamburger, H. L.; de Lange, J.; Lobbezoo, F.; Aarab, G.

2017-01-01

Obstructive sleep apnoea syndrome (OSAS) is associated with several sleep disorders and sleep-related problems. Therefore, the aim of this study was to compare the effects of a mandibular advancement device (MAD) with those of nasal continuous positive airway pressure (nCPAP) on self-reported

Prefabricated fibula free flap with dental implants for mandibular reconstruction.

Science.gov (United States)

Pauchet, D; Pigot, J-L; Chabolle, F; Bach, C-A

2018-03-02

Free fibula transplant is routinely used for mandibular reconstruction in head and neck cancer. Dental rehabilitation, the objective of mandibular reconstruction, requires the use of dental implants as supports for fixed or removable dentures. Positioning of fibular bone grafts and implants determines implant osseointegration and the possibilities of dental rehabilitation. Prefabrication of a fibula free flap with dental implants prior to harvesting as a free flap can promote implant osseointegration. The position of the implants must then be precisely planned. Virtual surgery and computer-assisted design and prefabrication techniques are used to plan the reconstruction and then reproduce this planning by means of tailored fibula and mandible cutting guides, thereby ensuring correct positioning of fibular bone fragments and implants. The prefabricated fibula free flap technique requires two surgical procedures (prefabrication and flap transfer) and precise preoperative planning. Prefabricated fibula free flap with dental implants, by improving the quality of osseointegration of the implants before flap transfer, extends the possibilities of prosthetic rehabilitation in complex secondary mandibular reconstructions. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Endodontic management of a mandibular second molar with radix entomolaris: a case report

Directory of Open Access Journals (Sweden)

Rosaline Hannah

2014-05-01

Full Text Available The presence of radix entomolaris (RE in a mandibular first molar is a common occurrence in certain ethnic groups, but the presence of RE in a mandibular second molar is a rare occurrence. In the present case, RE was identified from preoperative radiographs and confirmed using cone-beam computed tomography (CBCT. The access cavity was modified to locate the RE. Cleaning and shaping were performed with nickel-titanium rotary instruments. Obturation was completed with gutta-percha cones using AH Plus (Dentsply Detrey GmbH as sealer. From the CBCT axial images, the RE was determined to have a Type III curvature by the De Moor classification, Type B separate RE by the Carlsen and Alexandersen classification, and radiographically, a Type i image by the Wang classification. The presence of RE in the mandibular second molar makes it essential to anticipate and treat the distolingual root canal. This case report highlights the usefulness of CBCT for assessing RE in the mandibular second molar, which can help the clinician in making a confirmatory diagnosis and assessing the morphology of the root canal.

Interpretation of mandibular condyle fractures using 2D- and 3D-computed tomography

Directory of Open Access Journals (Sweden)

Costa e Silva Adriana Paula de Andrade da

2003-01-01

Full Text Available Computed tomography (CT has been increasingly used in the examination of patients with craniofacial trauma. This technique is useful in the examination of the temporomandibular joint and allows the diagnosis of fractures of the mandibular condyle. Aiming to verify whether the three-dimensional reconstructed images from CT (3D-CT produce more effective visual information than the two-dimensional (2D-CT ones, we evaluated 2D-CT and 3D-CT examinations of 18 patients with mandibular condyle fractures. We observed that 2D-CT and 3D-CT reconstructed images produced similar information for the diagnosis of fractures of the mandibular condyle, although the 3D-CT allowed a better visualization of the position and displacement of bone fragments, as well as the comminution of fractures. These results, together with the possibility of refining and manipulating perspectives in 3D images, reinforce the importance of its use in the surgical planning and evaluation of treatment. We concluded that 3D-CT presented supplementary information for a more effective diagnosis of mandibular condyle fractures.

Correlation between mandibular gland secretion and cuticular hydrocarbons in the stingless bee Melipona quadrifasciata.

Science.gov (United States)

Cruz-Landim, C; Ferreira-Caliman, M J; Gracioli-Vitti, L F; Zucchi, R

2012-04-19

We investigated whether Melipona quadrifasciata worker mandibular gland secretions contribute directly to their cuticular hydrocarbon profile. The mandibular gland secretion composition and cuticular surface compounds of newly emerged worker bees, nurse bees, and foragers were determined by gas chromatography and mass spectrometry and compared. Both the mandibular gland secretions and the cuticular surface compounds of all worker stages were found to be composed almost exclusively of hydrocarbons. Although the relative proportion of hydrocarbons from the cuticular surface and gland secretion was statistically different, there was a high similarity in the qualitative composition between these structures in all groups of bees.

Intraoperative Hemorrhage and Postoperative Sequelae after Intraoral Vertical Ramus Osteotomy to Treat Mandibular Prognathism

Science.gov (United States)

Chen, Chun-Ming; Lai, Steven; Chen, Ker-Kong; Lee, Huey-Er

2015-01-01

Objective. To investigate the factors affecting intraoperative hemorrhage and postoperative sequelae after orthognathic surgery. Materials and Methods. Eighty patients with mandibular prognathism underwent surgical mandibular setback with intraoral vertical ramus osteotomy (IVRO). The correlation between the blood loss volume and postoperative VAS with the gender, age, and operating time was assessed using the t-test and Spearman rank correlation coefficient. The correlation between the magnitude of mandibular setback with the presence of TMJ clicking symptoms and lip sensation was also assessed. Results. The mean operating time and blood loss volume for men and women were 249.52 min and 229.39 min, and 104.03 mL and 86.12 mL, respectively. The mean VAS in men and women was 3.21 and 2.93, and 1.79 and 1.32 on the first and second postoperative days. There is no gender difference in the operating time, blood loss, VAS, TMJ symptoms, and lip numbness. The magnitude of mandibular setback was not correlated with immediate and long-term postoperative lip numbness. Conclusion. There are no gender differences in the intraoperative hemorrhage and postoperative sequelae (pain, lip numbness, and TMJ symptoms). In addition, neither symptom was significantly correlated with the amount of mandibular setback. PMID:26543855

Root Anatomy and Root Canal Configuration of Human Permanent Mandibular Premolars: A Systematic Review

Directory of Open Access Journals (Sweden)

Jojo Kottoor

2013-01-01

Full Text Available Introduction. Mandibular premolars have been reported with complex anatomical aberrations, making them one of the most difficult teeth to manage endodontically. Methodology. An exhaustive search was undertaken to identify associated anatomic studies of mandibular premolars through MEDLINE/PubMed database using keywords, and a systematic review of the relevant articles was performed. Chi-square test with Yates correction was performed to assess the statistical significance of any anatomic variations between ethnicities and within populations of the same ethnicity. Documented case reports of variations in mandibular premolar anatomy were also identified and reviewed. Results. Thirty-six anatomic studies were analyzed which included 12,752 first premolars and nineteen studies assessing 6646 second premolars. A significant variation in the number of roots, root canals, and apical foramen was observed between Caucasian, Indian, Mongoloid, and Middle Eastern ethnicities.The most common anatomic variation was C-shaped canals in mandibular first premolars with highest incidence in Mongoloid populations (upto 24% while dens invaginatus was the most common developmental anomaly. Conclusions. A systematic review of mandibular premolars based on ethnicity and geographic clusters offered enhanced analysis of the prevalence of number of roots and canals, their canal configuration, and other related anatomy.

Intraoperative Hemorrhage and Postoperative Sequelae after Intraoral Vertical Ramus Osteotomy to Treat Mandibular Prognathism

Directory of Open Access Journals (Sweden)

Chun-Ming Chen

2015-01-01

Full Text Available Objective. To investigate the factors affecting intraoperative hemorrhage and postoperative sequelae after orthognathic surgery. Materials and Methods. Eighty patients with mandibular prognathism underwent surgical mandibular setback with intraoral vertical ramus osteotomy (IVRO. The correlation between the blood loss volume and postoperative VAS with the gender, age, and operating time was assessed using the t-test and Spearman rank correlation coefficient. The correlation between the magnitude of mandibular setback with the presence of TMJ clicking symptoms and lip sensation was also assessed. Results. The mean operating time and blood loss volume for men and women were 249.52 min and 229.39 min, and 104.03 mL and 86.12 mL, respectively. The mean VAS in men and women was 3.21 and 2.93, and 1.79 and 1.32 on the first and second postoperative days. There is no gender difference in the operating time, blood loss, VAS, TMJ symptoms, and lip numbness. The magnitude of mandibular setback was not correlated with immediate and long-term postoperative lip numbness. Conclusion. There are no gender differences in the intraoperative hemorrhage and postoperative sequelae (pain, lip numbness, and TMJ symptoms. In addition, neither symptom was significantly correlated with the amount of mandibular setback.

Prolonged vertigo and ataxia after mandibular nerve block for treatment of trigeminal neuralgia

Directory of Open Access Journals (Sweden)

Arvind Chaturvedi

2011-01-01

Full Text Available Common complications of neurolytic mandibular nerve block are hypoesthesia, dysesthesia, and chemical neuritis. We report a rare complication, prolonged severe vertigo and ataxia, after neurolytic mandibular blockade in a patient suffering from trigeminal neuralgia. Coronoid approach was used for right sided mandibular block. After successful test injection with local anesthetic, absolute alcohol was given for neurolytic block. Immediately after alcohol injection, patient developed nausea and vomiting along with severe vertigo, ataxia and hypertension. Neurological evaluation was normal except for the presence of vertigo and ataxia. Computerised tomography scan brain was also normal. Patient was admitted for observation and symptomatic treatment was given. Vertigo and ataxia gradually improved over 24 hours.

Prevalence of radix entomolaris in mandibular permanent first molars: a study in a South Indian population.

Science.gov (United States)

Chandra, Saurabh S; Chandra, Supriya; Shankar, Padmanabhan; Indira, Rajamani

2011-09-01

Anatomical racial variations are an acknowledged characteristic in permanent molars. Generally, mandibular first molars have 2 roots; however, the presence of a third root, radix entomolaris (RE), is a major anatomic variant among many population groups. This study evaluated the prevalence of permanent mandibular first molars featuring a distolingual root in a South Indian population. Five hundred patients of South Indian origin possessing bilateral mandibular first molars were selected. The radiographs of these patients were evaluated under optimal conditions. A total of 1000 mandibular first molars were screened and the incidence of 3-rooted mandibular first molars and the correlation between left and right side occurrence and between either gender was recorded. The prevalence of 3-rooted mandibular first molars was 18.6% of the patients examined and 13.3% of the teeth examined. There was no statistically significant difference between genders or side of occurrence (P > .05). The bilateral incidence of a symmetric distribution was 43.01%. RE is considered an Asiatic trait. The occurrence of this macrostructure in the South Indian population was 13.3%, which was lower than that of other patients of Mongoloid origin. The clinician must thoroughly examine the radiograph before initiation of endodontic therapy. Copyright © 2011 Mosby, Inc. All rights reserved.

Comprehensive Analysis of Mandibular Residual Asymmetry after Bilateral Sagittal Split Ramus Osteotomy Correction of Menton Point Deviation.

Science.gov (United States)

Lin, Han; Zhu, Ping; Lin, Qiuping; Huang, Xiaoqiong; Xu, Yue; Yang, Xiaoping

2016-01-01

Facial asymmetry often persists even after mandibular deviation corrected by the bilateral sagittal split ramus osteotomy (BSSRO) operation, since the reference facial sagittal plane for the asymmetry analysis is usually set up before the mandibular menton (Me) point correction. Our aim is to develop a predictive and quantitative method to assess the true asymmetry of the mandible after a midline correction performed by a virtual BSSRO, and to verify its availability by evaluation of the post-surgical improvement. A retrospective cohort study was conducted at the Hospital of Stomatology, Sun Yat-sen University (China) of patients with pure hemi-mandibular elongation (HE) from September 2010 through May 2014. Mandibular models were reconstructed from CBCT images of patients with pre-surgical orthodontic treatment. After mandibular de-rotation and midline alignment with virtual BSSRO, the elongation hemi-mandible was virtually mirrored along the facial sagittal plane. The residual asymmetry, defined as the superimposition and boolean operation of the mirrored elongation side on the normal side, was calculated, including the volumetric differences and the length of transversal and vertical asymmetry discrepancy. For more specific evaluation, both sides of the hemi-mandible were divided into the symphysis and parasymphysis (SP), mandibular body (MB), and mandibular angle (MA) regions. Other clinical variables include deviation of Me point, dental midline and molar relationship. The measurement of volumetric discrepancy between the two sides of post-surgical hemi-mandible were also calculated to verify the availability of virtual surgery. Paired t-tests were computed and the P value was set at .05. This study included 45 patients. The volume differences were 407.8±64.8 mm3, 2139.1±72.5 mm3, and 422.5±36.9 mm3; residual average transversal discrepancy, 1.9 mm, 1.0 mm, and 2.2 mm; average vertical discrepancy, 1.1 mm, 2.2 mm, and 2.2 mm (before virtual surgery). The

Condylar growth after non-surgical advancement in adult subject: a case report

Directory of Open Access Journals (Sweden)

Caradonna Carola

2009-07-01

Full Text Available Abstract Background A defect of condylar morphology can be caused by several sources. Case report A case of altered condylar morphology in adult male with temporomandibular disorders was reported in 30-year-old male patient. Erosion and flattening of the left mandibular condyle were observed by panoramic x-ray. The patient was treated with splint therapy that determined mandibular advancement. Eight months after the therapy, reduction in joint pain and a greater opening of the mouth was observed, although crepitation sounds during mastication were still noticeable. Conclusion During the following months of gnatologic treatment, new bone growth in the left condyle was observed by radiograph, with further improvement of the symptoms.

Cerebro-costo-mandibular syndrome

International Nuclear Information System (INIS)

Flodmark, P.; Wattsgaard, C.

2001-01-01

Cerebro-costo-mandibular syndrome is a rare disorder characterized by rib malformations, various degrees of cerebral maldevelopment, mental deficiency, palatal defects, and micrognatia. This syndrome was first described in 1966. The majority of cases are sporadic, but a few instances of familial occurrence have been reported, some with an autosomal recessive pattern of inheritance. Mortality in early age has been high, probably mostly due to respiratory insufficiency secondary to rib abnormalities and flail chest. We report a mother and son with this disorder, suggesting autosomal dominant transmission. (orig.)

Devices, materials, and processes for nano-electronics: characterization with advanced X-ray techniques using lab-based and synchrotron radiation sources

International Nuclear Information System (INIS)

Zschech, E.; Wyon, C.; Murray, C.E.; Schneider, G.

2011-01-01

Future nano-electronics manufacturing at extraordinary length scales, new device structures, and advanced materials will provide challenges to process development and engineering but also to process control and physical failure analysis. Advanced X-ray techniques, using lab systems and synchrotron radiation sources, will play a key role for the characterization of thin films, nano-structures, surfaces, and interfaces. The development of advanced X-ray techniques and tools will reduce risk and time for the introduction of new technologies. Eventually, time-to-market for new products will be reduced by the timely implementation of the best techniques for process development and process control. The development and use of advanced methods at synchrotron radiation sources will be increasingly important, particularly for research and development in the field of advanced processes and new materials but also for the development of new X-ray components and procedures. The application of advanced X-ray techniques, in-line, in out-of-fab analytical labs and at synchrotron radiation sources, for research, development, and manufacturing in the nano-electronics industry is reviewed. The focus of this paper is on the study of nano-scale device and on-chip interconnect materials, and materials for 3D IC integration as well. (authors)

Middle mesial canals in mandibular molars: incidence and related factors.

Science.gov (United States)

Nosrat, Ali; Deschenes, Raney J; Tordik, Patricia A; Hicks, M Lamar; Fouad, Ashraf F

2015-01-01

Although the internal anatomy of mandibular molars has been extensively studied, information about middle mesial (MM) canals is limited. The primary aim of this retrospective study was to evaluate the incidence of MM canals in mandibular first and second molars. The secondary aim was to correlate the incidence of MM canals with variables of molar type, sex, age, ethnicity, and presence of a second distal canal. All mature permanent first and second mandibular molars treated from August 2012 to May 2014 were included in the analysis. After completion of root canal instrumentation in all main canals, the clinician inspected the isthmus area of the mesial root using the dental operating microscope. If there was a catch point in this area with a file or explorer, the operator spent more time attempting to negotiate an MM canal. Seventy-five mandibular first and second molars were treated during the specified period. Fifteen (20%) teeth had negotiable MM canals. The incidence of MM canals was 32.1% in patients ≤ 20 years old, 23.8% in patients 21-40 years old, and 3.8% in patients > 40 years. Analysis of data revealed a significant difference in the distribution of MM canals among different age groups (P molar type, and presence of a second distal canal were not significant. The incidence of negotiable MM canals overall and their frequency of identification in younger patients were higher than in previous reports. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The relationship between age and the mandibular cortical bone thickness by using panoramic radiograph

International Nuclear Information System (INIS)

Kim, Yun Suk; Kim, Kyoung A; Koh, Kwang Joon

2010-01-01

This study was to determine the relationship between age and the mandibular cortical bone thickness on panoramic radiograph. Panoramic radiographs of 360 patients (180 men and 180 women) over 20 years old, who visited the Chonbuk National University Hospital from January to December in 2007, were assessed. The subjects were divided into 5 age groups. Five indices such as cortical bone thickness at the gonion (GI), antegonion (AI), and below the mental foramen (MI), the panoramic mandibular index (PMI), the mandibular cortical index (MCI) were measured on panoramic radiographs. All five indices including GI, AI, MI, PMI, and MCI showed significant differences between third decade and over 8 decade groups (p,0.05). PMI, MI and GI showed significant differences with gender statistically (p<0.05). The mandibular cortical bone thickness showed negative correlation with age, and the value of the thickness (PMI, MI, and GI) was greater in men than in women.

Cephalometric analysis of the middle part of the face in patients with mandibular prognathism

Directory of Open Access Journals (Sweden)

Čutović Tatjana

2014-01-01

Full Text Available Background/Aim. The middle part of the face, that is the maxilla, has always been mentioned as a possible etiologic factor of skeletal Class III. However, the importance of the relationship of maxillary retroposition towards the cranial base is still unclear, although it has been examined many times. The aim of this study was to conduct cephalometric analysis of the morphology of maxilla, including the whole middle part of the face in patients with divergent and convergent facial types of mandibular prognathism, as well as to determine differences betweeen them. Methods. Lateral cephalometric teleradiograph images of 90 patients were analyzed at the Dental Clinic of the Military Medical Academy, Belgrade, Serbia. All the patients were male, aged 18-35 years, not previously treated orthodontically. On the basis of dentalskeletal relations of jaws and teeth, the patients were divided into three groups: the group P1 (patients with divergent facial type of mandibular prognathism, P2 (patients with convergent facial type of mandibular pragmathism and the group E (control group or eugnathic patients. A total of 9 cephalometric parameters related to the middle face were measured and analyzed: the length of the hard palate - SnaSnp, the length of the maxillary corpus - AptmPP, the length of the soft palate, the angle between the hard and soft palate - SnaSnpUt, the angle of inclination of the maxillary alveolar process, the angle of inclination of the upper front teeth, the effective maxillary length - CoA, the posterior maxillary alveolar hyperplasia - U6PP and the angle of maxillary prognathism. Results. The obtained results showed that the CoA, AptmPP and SnaSnp were significally shorter in patients with divergent facial type of mandibular prognathism compared to patients with convergent facial type of the mandibular prognathism and also in both experimental groups of patients compared to the control group. SnaSnp was significantly shorter in

Treatment of mandibular symphyseal fracture combined with dislocated intracapsular condylar fractures.

Science.gov (United States)

Xu, Xiaofeng; Shi, Jun; Xu, Bing; Dai, Jiewen; Zhang, Shilei

2015-03-01

To evaluate the treatment methods of mandibular symphyseal fracture combined with dislocated intracapsular condylar fractures (MSF&DICF) and to compare the effect of different treatment methods of condylar fractures. Twenty-eight patients with MSF&DICF were included in this study. Twenty-two sites were treated by open reduction, and all the medial condylar fragments were fixed with titanium screws; whereas the other 22 sites underwent close treatment. The surgical effect between these 2 groups was compared based on clinical examination and radiographic examination results. Seventeen of 22 condyle fractures were repositioned in the surgery group, whereas 4 of 22 condyle fractures were repositioned in the close treatment group. Statistical difference was observed between these 2 groups (P condyle fractures should be treated by surgical reduction with the maintenance of the attachment of lateral pterygoid muscle, which is beneficial to repositioning the dislocated condyle to its original physiological position, to closure of the mandibular lingual gap, to restore the mandibular width.

Unexpected complications of bonded mandibular lingual retainers.

NARCIS (Netherlands)

Katsaros, C.; Livas, C.; Renkema, A.M.

2007-01-01

INTRODUCTION: The flexible spiral wire (FSW) retainer is the most frequently used type of fixed retainer bonded on all 6 anterior teeth. Our aim in this article was to demonstrate unexpected posttreatment changes in the labiolingual position of the mandibular anterior teeth associated with the use

Patients' Priorities and Attitudes Towards Their Temporo-Mandibular Disorders.

Science.gov (United States)

Kelleher, Martin; Ray-Chaudhuri, Arijit; Khawaja, Noman

2015-08-01

The diagnosis and appropriate management of temporo-mandibular disorders (TMDs) remains controversial. Current scientific evidence highlights the importance of psychosocial factors in sufferers and the reducing emphasis on occlusal or dental/prosthetic factors. This paper describes the findings of a survey of 211 patients reporting pain from their temporo-mandibular joint area and associated structures. This article offers busy primary dental care practitioners a cost effective questionnaire for obtaining relevant information from patients about the history of their condition and highlights what patients hope to achieve through the management of their disorder. It also emphasises the importance of communicating effectively with patients and offers practical tips for the management of TMDs in primary care.

Transmigration of mandibular second premolar in a patient with cleft lip and palate--case report.

Science.gov (United States)

Alves, Daniel Berretta Moreira; Pedrosa, Esio Fortaleza Nascimento Chaves; Andreo, Jesus Carlos; de Carvalho, Izabel Maria Marchi; Rodrigues, Antonio de Castro

2008-01-01

Disturbances involving abnormalities in tooth eruption are named ectopia. Transmigration is the name assigned to ectopia in the presence of teeth in areas distant from the alveolar process. Initial angulation of the tooth bud of the second premolar and premature loss of permanent mandibular 1st molars can influence the distal migration of the second premolar. Some studies have observed that ectopic teeth can be found in a variety of places around the oral cavity and also in other areas of the human body. There are records of teeth in the maxillary sinus, mandibular condyle, coronoid process, mandibular angle, orbit, palate, mentum and also the skin. The prevalence of tooth abnormalities is higher in children with cleft lip and palate compared to children without clefts. This paper presents a case report of migration of the mandibular left second premolar in a patient attending the Hospital for Rehabilitation of Craniofacial Anomalies of the University of São Paulo (HRAC/USP), Brazil. Migration of the mandibular left 2nd premolar was confirmed by 8 panoramic and 1 periapical radiographs obtained during patient's treatment between 1978 and 2002, which were available in the files of the Department of Dental Radiology of HRAC/USP. It can be assumed that distal migration of the mandibular left 2nd premolar is not associated with presence of cleft lip and palate; observation of these two events in a same patient is rare, since no similar reported cases were found in the literature.

Eruption age of permanent mandibular first molars and central incisors in the south Indian population

Directory of Open Access Journals (Sweden)

Gupta Rakhi

2007-01-01

Full Text Available Objective: The existing eruption schedules for permanent and deciduous dentition are based on studies in the Western population. Since Indians differ from Westerners racially, genetically, and environmentally, these studies fail to provide relevant guidance on the eruption schedule in the Indian population. This study aims at determining the eruption pattern of permanent mandibular molars and central incisors in the south Indian population. Materials and Methods: 10,156 apparently healthy Indian children in the age-group of 6-9 years were examined with mouth mirror and probe under adequate illumination for the status of the eruption of the permanent mandibular first molar and permanent mandibular central incisor. Pearson′s Chi-square test with Yates′ continuity correction was used to calculate the P -value for comparison of proportion between girls and boys. The values obtained in our study were compared with the standard values. The Z-test with continuity correction was used to calculate the P -value. Results: As per our study, the permanent mandibular first molars and central incisors erupted one to two years later compared to the values reported in Westerners. The earlier eruption of the permanent mandibular first molars compared to the permanent mandibular central incisors, as well as the earlier eruption of both the teeth in girls compared to boys, were in accordance with the existing literature. Conclusion: The eruption age reported by us may form a standard reference for eruption age in Indians.

Mandibular reconstruction of a post-surgical deformity due to trauma

OpenAIRE

Morales Navarro, Denia; Álvarez Garrido, David; González Vargas, Leticia; Basulto Varela, José Felipe

2016-01-01

La necesidad de una reconstrucción mandibular está dictada por la pérdida de hueso debido, entre otras causas, a trauma. El propósito de este trabajo es caracterizar un caso de reconstrucción mandibular de una deformidad posquirúrgica por trauma. Se trata de un paciente masculino de 34 años que acude a consulta por inconformidad estética y dificultad para masticar. Aproximadamente un año atrás había padecido un trauma facial, por lo cual fue atendido de urgencia e intervenido quirúrgicamente....

Multicentre prospective evaluation of implant-assisted mandibular bilateral distal extension removable partial dentures: patient satisfaction

NARCIS (Netherlands)

Wismeijer, D.; Tawse-Smith, A.; Payne, A.G.T.

2013-01-01

Objective To compare the levels of patient satisfaction with either conventional mandibular bilateral distal extension partial dentures or those assisted by bilateral distal implants. Materials and methods Forty-eight participants who were dissatisfied with their existing conventional mandibular

[Long-term follow-up study of titanium implant impact on pediatric mandibular growth and development].

Science.gov (United States)

Hu, Yun; Li, Wei; Chen, Qi; Song, Fumin; Tang, Wei; Wang, Hang

2015-08-01

To explore the impact of titanium implant on the growth and development of pediatric mandible after suffering from mandibular fracture and undergoing open reduction and internal fixation (ORIF) compared with those that underwent titanium plate removal postoperatively. Fifteen pediatric patients with mandibular fracture who underwent ORIF were included in this study. Eight patients did not undergo titanium implant removal postoperatively, whereas the other seven patients underwent the routine. The postoperative data of the pediatrics were collected for comparative analysis by taking the patients' frontal and lateral photos, recording the inter-incisor distance, and measuring the height of mandibular ramus, length of the mandibular body, and combined length of the mandible in three-dimensional reconstruction image. All patients had acceptable facial contour, mouth opening, and occlusion, without obvious abnormalities. The radiography showed no significant difference between the bilateral mandibular lengths in the two groups of patients (P>0.05). The titanium plants have no significant impact on the growth and development of pediatric mandible postoperatively; hence, the question on whether the titanium plates should be removed or not may be neglected. The removal operation may lead to secondary trauma; thus, performing titanium plate removal routinely is not recommended.