Fuzzy hybrid MCDM approach for selection of wind turbine service technicians

Directory of Open Access Journals (Sweden)

Goutam Kumar Bose

2016-01-01

Full Text Available This research paper is aimed to present a fuzzy Hybrid Multi-criteria decision making (MCDM methodology for selecting employees. The present study aspires to present the hybrid approach of Fuzzy multiple MCDM techniques with tactical viewpoint to support the recruitment process of wind turbine service technicians. The methodology is based on the application of Fuzzy ARAS (Additive Ratio Assessment and Fuzzy MOORA (Multi-Objective Optimization on basis of Ratio Analysis which are integrated through group decision making (GDM method in the model for selection of wind turbine service technicians’ ranking. Here a group of experts from different fields of expertise are engaged to finalize the decision. Series of tests are conducted regarding physical fitness, technical written test, practical test along with general interview and medical examination to facilitate the final selection using the above techniques. In contrast to single decision making approaches, the proposed group decision making model efficiently supports the wind turbine service technicians ranking process. The effectiveness of the proposed approach manifest from the case study of service technicians required for the maintenance department of wind power plant using Fuzzy ARAS and Fuzzy MOORA. This set of potential technicians is evaluated based on five main criteria.

Product Development using QFD, MCDM and the Combination of these Two Methods

International Nuclear Information System (INIS)

Marini, C D; Fatchurrohman, N; Azhari, A; Suraya, S

2016-01-01

Product development (PD) consists of several activities and one of early stage in PD is conceptual design stage which is the most crucial stage in developing a new product. Incorrect design concept and material selection in conceptual stage will lead to product failure and increase the cost. Nevertheless, if the conceptual design stage is properly executed important parameters such as the time and cost can be minimized. The quality of the product also has a tremendous improvement. This paper mainly discuss on tooling medium used for material selection and design concept. It covers Quality Function Deployment (QFD), Multi Criteria Decision Making (MCDM) including Analytical Network Process (ANP) and Analytical Hierarchy Process (AHP). (paper)

Product Development using QFD, MCDM and the Combination of these Two Methods

Science.gov (United States)

Marini, C. D.; Fatchurrohman, N.; Azhari, A.; Suraya, S.

2016-02-01

Product development (PD) consists of several activities and one of early stage in PD is conceptual design stage which is the most crucial stage in developing a new product. Incorrect design concept and material selection in conceptual stage will lead to product failure and increase the cost. Nevertheless, if the conceptual design stage is properly executed important parameters such as the time and cost can be minimized. The quality of the product also has a tremendous improvement. This paper mainly discuss on tooling medium used for material selection and design concept. It covers Quality Function Deployment (QFD), Multi Criteria Decision Making (MCDM) including Analytical Network Process (ANP) and Analytical Hierarchy Process (AHP).

Strategic Part Prioritization for Quality Improvement Practice Using a Hybrid MCDM Framework: A Case Application in an Auto Factory

Directory of Open Access Journals (Sweden)

Fuli Zhou

2016-06-01

Full Text Available Quality improvement practice (QIP, as a competitive strategy, is increasingly vital for auto factories to improve the product quality and brand reputation. Quality activity on selected automotive parts among a variety of competing candidates is featured by prioritization calculation. It arouses our interest how to select the appropriate auto part to perform quality improvement action based on the collected data from the after-sale source. Managers usually select the QIP part by the rule of thumb that is based on the quantitative criterion or the subjective preference of individuals. The total quality management (TQM philosophy requires multiple stakeholders’ involvement, regarded as a multi-criteria decision making (MCDM issue. This paper proposes a novel hybrid MCDM framework to select the best quality improvement solution combining the subjective and objective information. The rough set-based attribute reduction (RSAR technique was employed to establish the hierarchy structure of influential criteria, and the decision information was collected with triangular fuzzy numbers (TFNs for its vagueness and ambiguity. In addition, the novel hybrid MCDM framework integrating fuzzy DEMATEL (decision making trial and evaluation laboratory method, the anti-entropy weighting (AEW technique and fuzzy VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR was developed to rank the alternatives with the combined weight of criteria. The results argue that the optimal solution keeps a high conformance with Shemshadi’s and Chaghooshi’s methods, which is better than the existing determination. Besides, the result analysis shows the robustness and flexibility of the proposed hybrid MCDM framework.

Multi criteria decision making methods for location selection of distribution centers

Directory of Open Access Journals (Sweden)

Romita Chakraborty

2013-10-01

Full Text Available In recent years, major challenges such as, increase in inflexible consumer demands and to improve the competitive advantage, it has become necessary for various industrial organizations all over the world to focus on strategies that will help them achieve cost reduction, continual quality improvement, increased customer satisfaction and on time delivery performance. As a result, selection of the most suitable and optimal facility location for a new organization or expansion of an existing location is one of the most important strategic issues, required to fulfill all of these above mentioned objectives. In order to sustain in the global competitive market of 21st century, many industrial organizations have begun to concentrate on the proper selection of the plant site or best facility location. The best location is that which results in higher economic benefits through increased productivity and good distribution network. When a choice is to be made from among several alternative facility locations, it is necessary to compare their performance characteristics in a decisive way. As the facility location selection problem involves multiple conflicting criteria and a finite set of potential candidate alternatives, different multi-criteria decision-making (MCDM methods can be effectively applied to solve such type of problem. In this paper, four well known MCDM methods have been applied on a facility location selection problem and their relative ranking performances are compared. Because of disagreement in the ranks obtained by the four different MCDM methods a final ranking method based on REGIME has been proposed by the authors to facilitate the decision making process.

Group Decision-Making for Hesitant Fuzzy Sets Based on Characteristic Objects Method

Directory of Open Access Journals (Sweden)

Shahzad Faizi

2017-07-01

Full Text Available There are many real-life problems that, because of the need to involve a wide domain of knowledge, are beyond a single expert. This is especially true for complex problems. Therefore, it is usually necessary to allocate more than one expert to a decision process. In such situations, we can observe an increasing importance of uncertainty. In this paper, the Multi-Criteria Decision-Making (MCDM method called the Characteristic Objects Method (COMET is extended to solve problems for Multi-Criteria Group Decision-Making (MCGDM in a hesitant fuzzy environment. It is a completely new idea for solving problems of group decision-making under uncertainty. In this approach, we use L-R-type Generalized Fuzzy Numbers (GFNs to get the degree of hesitancy for an alternative under a certain criterion. Therefore, the classical COMET method was adapted to work with GFNs in group decision-making problems. The proposed extension is presented in detail, along with the necessary background information. Finally, an illustrative numerical example is provided to elaborate the proposed method with respect to the support of a decision process. The presented extension of the COMET method, as opposed to others’ group decision-making methods, is completely free of the rank reversal phenomenon, which is identified as one of the most important MCDM challenges.

Comparative analysis of objective techniques for criteria weighing in two MCDM methods on example of an air conditioner selection

Directory of Open Access Journals (Sweden)

Vujičić Momčilo D.

2017-01-01

Full Text Available This paper deals with comparative analysis of two different types of objective techniques for criteria weighing: Entropy and CRITIC and two MCDM methods: MOORA and SAW on example of an air conditioner selection. We used six variants for calculation of normalized performance ratings. Results showed that the decision of the best air conditioner was basically independent of the MCDM method used, despite the applied technique for determination of criteria weights. Complete ranking within all of the combinations of methods and techniques with diverse ratio calculation variants showed that the best ranked air conditioner was A7, while the worst ones were A5 and A9. Significant positive correlation was obtained for almost all the pairs of variants in all the combinations except for the MOORA - CRITIC combination with SAW - Entropy combination to have the highest correlations between variants (p < 0.01.

Evaluation of Agile Suppliers Using Fuzzy MCDM Approach

Directory of Open Access Journals (Sweden)

Dursun Mehtap

2016-01-01

Full Text Available In today’s competitive environment, supply chain need to be of high speed and flexibility, i.e., agile. Agility has been proposed as a response to the high levels of complexity and uncertainty in modern markets. It is a business-wide capability that embraces organizational structures, information systems and logistics processes. This study employs the hierarchical fuzzy MCDM algorithm proposed by Karsak and Ahiska for the evaluation of agile suppliers. This algorithm is based on the proximity to the ideal solution concept and it can address the problems containing both crisp and fuzzy data. The application of the decision making method is illustrated through a case study conducted in a privet hospital and the results are analysed.

Assessment of health-care waste disposal methods using a VIKOR-based fuzzy multi-criteria decision making method

Energy Technology Data Exchange (ETDEWEB)

Liu, Hu-Chen [School of Management, Hefei University of Technology, Hefei 230009 (China); Department of Industrial Engineering and Management, Tokyo Institute of Technology, Tokyo 152-8552 (Japan); Wu, Jing [Department of Public Management, Tongji University, Shanghai 200092 (China); Li, Ping, E-mail: yiwuchulp@126.com [Shanghai Pudong New Area Zhoupu Hospital, No. 135 Guanyue Road, Shanghai 201318 (China); East Hospital Affiliated to Tongji University, No. 150 Jimo Road, Shanghai 200120 (China)

2013-12-15

Highlights: • Propose a VIKOR-based fuzzy MCDM technique for evaluating HCW disposal methods. • Linguistic variables are used to assess the ratings and weights for the criteria. • The OWA operator is utilized to aggregate individual opinions of decision makers. • A case study is given to illustrate the procedure of the proposed framework. - Abstract: Nowadays selection of the appropriate treatment method in health-care waste (HCW) management has become a challenge task for the municipal authorities especially in developing countries. Assessment of HCW disposal alternatives can be regarded as a complicated multi-criteria decision making (MCDM) problem which requires consideration of multiple alternative solutions and conflicting tangible and intangible criteria. The objective of this paper is to present a new MCDM technique based on fuzzy set theory and VIKOR method for evaluating HCW disposal methods. Linguistic variables are used by decision makers to assess the ratings and weights for the established criteria. The ordered weighted averaging (OWA) operator is utilized to aggregate individual opinions of decision makers into a group assessment. The computational procedure of the proposed framework is illustrated through a case study in Shanghai, one of the largest cities of China. The HCW treatment alternatives considered in this study include “incineration”, “steam sterilization”, “microwave” and “landfill”. The results obtained using the proposed approach are analyzed in a comparative way.

Assessment of health-care waste disposal methods using a VIKOR-based fuzzy multi-criteria decision making method

International Nuclear Information System (INIS)

Liu, Hu-Chen; Wu, Jing; Li, Ping

2013-01-01

Highlights: • Propose a VIKOR-based fuzzy MCDM technique for evaluating HCW disposal methods. • Linguistic variables are used to assess the ratings and weights for the criteria. • The OWA operator is utilized to aggregate individual opinions of decision makers. • A case study is given to illustrate the procedure of the proposed framework. - Abstract: Nowadays selection of the appropriate treatment method in health-care waste (HCW) management has become a challenge task for the municipal authorities especially in developing countries. Assessment of HCW disposal alternatives can be regarded as a complicated multi-criteria decision making (MCDM) problem which requires consideration of multiple alternative solutions and conflicting tangible and intangible criteria. The objective of this paper is to present a new MCDM technique based on fuzzy set theory and VIKOR method for evaluating HCW disposal methods. Linguistic variables are used by decision makers to assess the ratings and weights for the established criteria. The ordered weighted averaging (OWA) operator is utilized to aggregate individual opinions of decision makers into a group assessment. The computational procedure of the proposed framework is illustrated through a case study in Shanghai, one of the largest cities of China. The HCW treatment alternatives considered in this study include “incineration”, “steam sterilization”, “microwave” and “landfill”. The results obtained using the proposed approach are analyzed in a comparative way

A Complete MCDM Model for NPD Performance Assessment in an LED-Based Lighting Plant Factory

Directory of Open Access Journals (Sweden)

Wen-Chin Chen

2018-01-01

Full Text Available Globally, industries and economies have undergone rapid development and expansion over the last several decades. As a result, global warming and environmental contaminations have resulted in climate change and jeopardized food security. In many developing countries, already decreasing crop yields are threatened by extreme weather and soil damaged by genetically modified food, making environmental problems worse and increasing food and organic product prices. For these reasons, this study proposes a hybrid multicriteria decision-making (MCDM model for new product development (NPD in the light-emitting diode- (LED- based lighting plant factory. First, literature reviews and expert interviews are employed in constructing a list of decision-making objectives and criteria for new product development. Then, a fuzzy Delphi method (FDM is used to screen the elements of the objectives and criteria, while a fuzzy decision-making trial and evaluation laboratory (FDEMATEL is used to determine the relationships among the objectives and criteria. Finally, a fuzzy analytic network process (FANP and a composite priority vector (CPV are manipulated to determine the relative importance weights of the critical objectives and criteria. Results show that the proposed method can create a useful and assessable MCDM model for decision-making applications in new product development, and a case study is herein performed to validate the feasibility of the proposed model in a Taiwanese LED-based lighting plant factory, which not only provides the decision-makers with a feasible hierarchical data structure for decision-making guidance but also increases the competitive advantages of trade-offs on developing novel products.

A Multicriteria Decision Making Approach for Estimating the Number of Clusters in a Data Set

Science.gov (United States)

Peng, Yi; Zhang, Yong; Kou, Gang; Shi, Yong

2012-01-01

Determining the number of clusters in a data set is an essential yet difficult step in cluster analysis. Since this task involves more than one criterion, it can be modeled as a multiple criteria decision making (MCDM) problem. This paper proposes a multiple criteria decision making (MCDM)-based approach to estimate the number of clusters for a given data set. In this approach, MCDM methods consider different numbers of clusters as alternatives and the outputs of any clustering algorithm on validity measures as criteria. The proposed method is examined by an experimental study using three MCDM methods, the well-known clustering algorithm–k-means, ten relative measures, and fifteen public-domain UCI machine learning data sets. The results show that MCDM methods work fairly well in estimating the number of clusters in the data and outperform the ten relative measures considered in the study. PMID:22870181

MENGUKUR KESUKSESAN PRODUK PADA TAHAP DESAIN: SEBUAH PENDEKATAN FUZZY-MCDM

Directory of Open Access Journals (Sweden)

Ade Febransyah

2006-01-01

Full Text Available It has always been a great challenge to any product development team to forecast the success of a new product at the design stage. For any product concept, it is of interest to assign an accurate probability to any event or state of the world that reflects the new product success. This probability is then required in decision tree analysis for selecting the best product concept. In practice, the probability is determined solely on intuition or subjective judgment due to impreciseness, lack of information during the design stage, and the cognitive limitation of decision makers. This paper presents an approach integrating fuzzy set theory and multi criteria decision making (MCDM approach in forecasting accurately the success of a new product. The analytic hierarchy process (AHP is used due to its simplicity as a prescriptive approach that will help decision makers select the best decision with respect to a set of criteria. Fuzzy numbers are used to describe any judgment on design criteria and the event probability of a product concept. A numerical example is given to illustrate the use of this approach. Abstract in Bahasa Indonesia : Selalu menjadi tantangan besar bagi setiap tim pengembang produk untuk dapat mengestimasi tingkat kesuksesan suatu produk baru pada tahap desain. Tingkat kesuksesan yang dinyatakan dengan besar probabilitas berbagai state of the world dari suatu konsep produk selanjutnya digunakan dalam analisa keputusan untuk memilih konsep produk terlayak. Selama ini besar probabilitas ditentukan lebih banyak berdasarkan intuisi dan subyektifitas pengambil keputusan. Praktik ini cenderung menghasilkan keputusan yang bias mengingat keterbatasan kapabilitas kognitif manusia dalam mensintesa berbagai keunggulan maupun kekurangan dari sekumpulan konsep produk. Tulisan ini bertujuan untuk menyampaikan satu pendekatan yang mengintegrasikan logika fuzzy dan pendekatan pengambilan keputusan berkriteria jamak (multi criteria decision making

A Multiple Criteria Decision Making Method Based on Relative Value Distances

Directory of Open Access Journals (Sweden)

Shyur Huan-jyh

2015-12-01

Full Text Available This paper proposes a new multiple criteria decision-making method called ERVD (election based on relative value distances. The s-shape value function is adopted to replace the expected utility function to describe the risk-averse and risk-seeking behavior of decision makers. Comparisons and experiments contrasting with the TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution method are carried out to verify the feasibility of using the proposed method to represent the decision makers’ preference in the decision making process. Our experimental results show that the proposed approach is an appropriate and effective MCDM method.

Hesitant fuzzy linguistic multicriteria decision-making method based on generalized prioritized aggregation operator.

Science.gov (United States)

Wu, Jia-ting; Wang, Jian-qiang; Wang, Jing; Zhang, Hong-yu; Chen, Xiao-hong

2014-01-01

Based on linguistic term sets and hesitant fuzzy sets, the concept of hesitant fuzzy linguistic sets was introduced. The focus of this paper is the multicriteria decision-making (MCDM) problems in which the criteria are in different priority levels and the criteria values take the form of hesitant fuzzy linguistic numbers (HFLNs). A new approach to solving these problems is proposed, which is based on the generalized prioritized aggregation operator of HFLNs. Firstly, the new operations and comparison method for HFLNs are provided and some linguistic scale functions are applied. Subsequently, two prioritized aggregation operators and a generalized prioritized aggregation operator of HFLNs are developed and applied to MCDM problems. Finally, an illustrative example is given to illustrate the effectiveness and feasibility of the proposed method, which are then compared to the existing approach.

Application of preference selection index method for decision making over the design stage of production system life cycle

Directory of Open Access Journals (Sweden)

Rajesh Attri

2015-07-01

Full Text Available The life cycle of production system shows the progress of production system from the inception to the termination of the system. During each stage, mainly in the design stage, certain strategic decisions have to be taken. These decisions are more complex as the decision makers have to assess a wide range of alternatives based on a set of conflicting criteria. As the decision making process is found to be unstructured, characterized by domain dependent knowledge, there is a need to apply an efficient multi-criteria decision making (MCDM tool to help the decision makers in making correct decisions. This paper explores the application of a novel MCDM method i.e. Preference selection index (PSI method to solve various decision-making problems that are generally encountered in the design stage of production system life cycle. To prove the potentiality, applicability and accuracy of PSI method in solving decision making problem during the design stage of production system life cycle, five examples are cited from the literature and are compared with the results obtained by the past researchers.

High Technology Service Value Maximization through an MCDM-Based Innovative e-Business Model

Science.gov (United States)

Huang, Chi-Yo; Tzeng, Gwo-Hshiung; Ho, Wen-Rong; Chuang, Hsiu-Tyan; Lue, Yeou-Feng

The emergence of the Internet has changed the high technology marketing channels thoroughly in the past decade while E-commerce has already become one of the most efficient channels which high technology firms may skip the intermediaries and reach end customers directly. However, defining appropriate e-business models for commercializing new high technology products or services through Internet are not that easy. To overcome the above mentioned problems, a novel analytic framework based on the concept of high technology customers’ competence set expansion by leveraging high technology service firms’ capabilities and resources as well as novel multiple criteria decision making (MCDM) techniques, will be proposed in order to define an appropriate e-business model. An empirical example study of a silicon intellectual property (SIP) commercialization e-business model based on MCDM techniques will be provided for verifying the effectiveness of this novel analytic framework. The analysis successful assisted a Taiwanese IC design service firm to define an e-business model for maximizing its customer’s SIP transactions. In the future, the novel MCDM framework can be applied successful to novel business model definitions in the high technology industry.

Assessment of health-care waste disposal methods using a VIKOR-based fuzzy multi-criteria decision making method.

Science.gov (United States)

Liu, Hu-Chen; Wu, Jing; Li, Ping

2013-12-01

Nowadays selection of the appropriate treatment method in health-care waste (HCW) management has become a challenge task for the municipal authorities especially in developing countries. Assessment of HCW disposal alternatives can be regarded as a complicated multi-criteria decision making (MCDM) problem which requires consideration of multiple alternative solutions and conflicting tangible and intangible criteria. The objective of this paper is to present a new MCDM technique based on fuzzy set theory and VIKOR method for evaluating HCW disposal methods. Linguistic variables are used by decision makers to assess the ratings and weights for the established criteria. The ordered weighted averaging (OWA) operator is utilized to aggregate individual opinions of decision makers into a group assessment. The computational procedure of the proposed framework is illustrated through a case study in Shanghai, one of the largest cities of China. The HCW treatment alternatives considered in this study include "incineration", "steam sterilization", "microwave" and "landfill". The results obtained using the proposed approach are analyzed in a comparative way. Copyright © 2013. Published by Elsevier Ltd.

Group decision-making approach for flood vulnerability identification using the fuzzy VIKOR method

Science.gov (United States)

Lee, G.; Jun, K. S.; Chung, E.-S.

2015-04-01

This study proposes an improved group decision making (GDM) framework that combines the VIKOR method with data fuzzification to quantify the spatial flood vulnerability including multiple criteria. In general, GDM method is an effective tool for formulating a compromise solution that involves various decision makers since various stakeholders may have different perspectives on their flood risk/vulnerability management responses. The GDM approach is designed to achieve consensus building that reflects the viewpoints of each participant. The fuzzy VIKOR method was developed to solve multi-criteria decision making (MCDM) problems with conflicting and noncommensurable criteria. This comprising method can be used to obtain a nearly ideal solution according to all established criteria. This approach effectively can propose some compromising decisions by combining the GDM method and fuzzy VIKOR method. The spatial flood vulnerability of the southern Han River using the GDM approach combined with the fuzzy VIKOR method was compared with the spatial flood vulnerability using general MCDM methods, such as the fuzzy TOPSIS and classical GDM methods (i.e., Borda, Condorcet, and Copeland). As a result, the proposed fuzzy GDM approach can reduce the uncertainty in the data confidence and weight derivation techniques. Thus, the combination of the GDM approach with the fuzzy VIKOR method can provide robust prioritization because it actively reflects the opinions of various groups and considers uncertainty in the input data.

Closeness Degree-Based Hesitant Trapezoidal Fuzzy Multicriteria Decision Making Method for Evaluating Green Suppliers with Qualitative Information

Directory of Open Access Journals (Sweden)

Xiaolu Zhang

2018-01-01

Full Text Available The aim of this study is to develop a new closeness degree-based hesitant trapezoidal fuzzy (HTrF multicriteria decision making (MCDM approach for identifying the most appropriate green suppliers in food supply chain involving uncertain qualitative evaluation information. The uniqueness of the proposed HTrF MCDM method is the consideration of uncertain qualitative information represented by flexible linguistic expressions based on HTrF values and the construction of compromise solution with the revised closeness degree. The revised closeness degree can make sure that the most appropriate solution has the shortest distance from the HTrF positive ideal solution and the farthest distance from the HTrF negative ideal solution, simultaneously. This proposed HTrF MCDM technique not only offers a simple and efficient decision support tool to aid the food firms for identifying the optimal suppliers in food supply chain but also can enable the managers of food firms to better understand the complete evaluation and decision processes. In addition, this study provides a novel defuzzification technique to manage the HTrF weights values of main-criteria and subcriteria, respectively.

Application of an Integrated Model with MCDM and IPA to Evaluate the Service Quality of Transshipment Port

Directory of Open Access Journals (Sweden)

Chien-Chang Chou

2013-01-01

Full Text Available It is often to solve complex decision-making problems in the marine transportation environment, such as the evaluation of service quality and the location choice of ports. In this paper, an integrated model with multiple-criteria decision making (MCDM and importance-performance analysis (IPA is presented and then is applied to solve the problem of service quality evaluation of transshipment port. The MCDM approach can be used to deal with both quantitative data and qualitative ratings simultaneously. The IPA approach can be applied to realize the shortcomings of service quality of ports and rank the ranking of strategies for improving service quality of transshipment port. Finally, some useful suggestions for improving the service quality of ports are given in the paper.

An integrated MCDM approach to green supplier selection

Directory of Open Access Journals (Sweden)

Morteza Yazdani

2014-06-01

Full Text Available Supplier selection management has been considered as an important subject for industrial organizations. In order to remain on the market, to gain profitability and to retain competitive advantage, business units need to establish an integrated and structured supplier selection system. In addition, environmental protection problems have been big solicitudes for organizations to consider green approach in supplier selection problem. However, finding proper suppliers involves several variables and it is critically a complex process. In this paper, the main attention is focused on finding the right supplier based on fuzzy multi criteria decision making (MCDM process. The weights of criteria are calculated by analytical hierarchical process (AHP and the final ranking is achieved by fuzzy technique for order preference by similarity to an ideal solution (TOPSIS. TOPSIS advantage among the other similar methods is to obtain the best solution close to ideal solution. The paper attempts to express better understanding by an example of an automobile manufacturing supply chain.

The Fuzzy MCDM Algorithms for the M&A Due Diligence

Directory of Open Access Journals (Sweden)

Chung-Tsen Tsao

2008-04-01

Full Text Available An M&A due diligence is the process in which one of the parties to the transaction undertakes to investigate the other in order to judge whether to go forward with the transaction on the terms proposed. It encompasses the missions in three phases: searching and preliminary screening potential candidates, evaluating the candidates and deciding the target, and assisting the after-transaction integration. This work suggests using a Fuzzy Multiple Criteria Decision Making approach (Fuzzy MCDM and develops detailed algorithms to carry out the second-phase task. The approach of MCDM is able to facilitate the analysis and integration of information from different aspects and criteria. The theory of Fuzzy Sets can include qualitative information in addition to quantitative information. In the developed algorithms the evaluators' subjective judgments are expressed in linguistic terms which can better reflect human intuitive thought than the quantitative scores. These linguistic judgments are transformed into fuzzy numbers and made subsequent synthesis with quantitative financial figures. The order of candidates can be ranked after a defuzzification. Then the acquiring firm can work out a more specific study, including pricing and costing, on the priority candidates so as to decide the target.

MCDM based evaluation and ranking of commercial off-the-shelf using fuzzy based matrix method

Directory of Open Access Journals (Sweden)

Rakesh Garg

2017-04-01

Full Text Available In today’s scenario, software has become an essential component in all kinds of systems. The size and the complexity of the software increases with a corresponding increase in its functionality, hence leads to the development of the modular software systems. Software developers emphasize on the concept of component based software engineering (CBSE for the development of modular software systems. The CBSE concept consists of dividing the software into a number of modules; selecting Commercial Off-the-Shelf (COTS for each module; and finally integrating the modules to develop the final software system. The selection of COTS for any module plays a vital role in software development. To address the problem of selection of COTS, a framework for ranking and selection of various COTS components for any software system based on expert opinion elicitation and fuzzy-based matrix methodology is proposed in this research paper. The selection problem is modeled as a multi-criteria decision making (MCDM problem. The evaluation criteria are identified through extensive literature study and the COTS components are ranked based on these identified and selected evaluation criteria using the proposed methods according to the value of a permanent function of their criteria matrices. The methodology is explained through an example and is validated by comparing with an existing method.

A Hybrid MCDM Technique for Risk Management in Construction Projects

Directory of Open Access Journals (Sweden)

Kajal Chatterjee

2018-02-01

Full Text Available Multi-stakeholder based construction projects are subject to potential risk factors due to dynamic business environment and stakeholders’ lack of knowledge. When solving project management tasks, it is necessary to quantify the main risk indicators of the projects. Managing these requires suitable risk mitigation strategies to evaluate and analyse their severity. The existence of information asymmetry also causes difficulties with achieving Pareto efficiency. Hence, to ensure balanced satisfaction of all participants, risk evaluation of these projects can be considered as an important part of the multi-criteria decision-making (MCDM process. In real-life problems, evaluation of project risks is often uncertain and even incomplete, and the prevailing methodologies fail to handle such situations. To address the problem, this paper extends the analytical network process (ANP methodology in the D numbers domain to handle three types of ambiguous information’s, viz. complete, uncertain, and incomplete, and assesses the weight of risk criteria. The D numbers based approach overcomes the deficiencies of the exclusiveness hypothesis and completeness constraint of Dempster–Shafer (D–S theory. Here, preference ratings of the decision matrix for each decision-maker are determined using a D numbers extended consistent fuzzy preference relation (D-CFPR. An extended multi-attributive border approximation area comparison (MABAC method in D numbers is then developed to rank and select the best alternative risk response strategy. Finally, an illustrative example from construction sector is presented to check the feasibility of the proposed approach. For checking the reliability of alternative ranking, a comparative analysis is performed with different MCDM approaches in D numbers domain. Based on different criteria weights, a sensitivity analysis of obtained ranking of the hybrid D-ANP-MABAC model is performed to verify the robustness of the proposed

MULTICRITERIA DECISION-MAKING

NARCIS (Netherlands)

HENDRIKS, MMWB; DEBOER, JH; SMILDE, AK; DOORNBOS, DA

1992-01-01

Interest is growing in multicriteria decision making (MCDM) techniques and a large number of these techniques are now available. The purpose of this tutorial is to give a theoretical description of some of the MCDM techniques. Besides this we will give an overview of the differences and similarities

Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model

Directory of Open Access Journals (Sweden)

Mohammad Hassan Shojaeefard

Full Text Available Abstract The floor pan is an important component that connects the front and rear segments of the automotive underbody structure. Global stiffness and NVH characteristics of BIW are highly dependent to shape, thickness and mass of the body panels and could be evaluated by modal characteristics of these panels. The feeling of solidness and comfort of passengers in an automotive is also dependent to the modal behavior of the underbody components as well as the floor pan. On the other hand, it is desired to reduce the total mass of the floor pan, in order to have a lighter vehicle with better fuel economy and emission standards. In this paper, the effect of geometrical parameters on natural frequency and total mass of the floor pan of a conventional B-Segment automotive body is investigated using finite element simulation. The finite element model is verified using an experimental test on the floor pan. Taguchi L 16 orthogonal array is used to design the numerical experiments. Subsequently, S/N ratio analysis is performed to evaluate the effect of each design variable on the output functions. The panel's thickness is determined to have the most contribution in affecting the natural frequency and weight using Analysis of Variance (ANOVA. The best combination of geometrical variables which leads to the trade-off results is then figured out by a new multi-criteria decision making (MCDM method developed in this study. Accuracy of this method is verified by comparing the trade-off results with TOPSIS, as a conventional MCDM method.

SELECTION OF NON-CONVENTIONAL MACHINING PROCESSES USING THE OCRA METHOD

Directory of Open Access Journals (Sweden)

Miloš Madić

2015-04-01

Full Text Available Selection of the most suitable nonconventional machining process (NCMP for a given machining application can be viewed as multi-criteria decision making (MCDM problem with many conflicting and diverse criteria. To aid these selection processes, different MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. operational competitiveness ratings analysis (OCRA method for solving the NCMP selection problems. Applicability, suitability and computational procedure of OCRA method have been demonstrated while solving three case studies dealing with selection of the most suitable NCMP. In each case study the obtained rankings were compared with those derived by the past researchers using different MCDM methods. The results obtained using the OCRA method have good correlation with those derived by the past researchers which validate the usefulness of this method while solving complex NCMP selection problems.

Robust Priority for Strategic Environmental Assessment with Incomplete Information Using Multi-Criteria Decision Making Analysis

Directory of Open Access Journals (Sweden)

Daeryong Park

2015-07-01

Full Text Available This study investigates how the priority rankings for dam construction sites vary with multi-criteria decision making (MCDM techniques and generation approaches for incomplete information. Strategic environmental assessment (SEA seeks to recommend sustainable dam construction sites based on their environmental and ecological impacts in a long-term plan for dam construction (LPDC in South Korea. However, if specific information is missing, the SEA is less useful for choosing a dam construction site. In this study, we applied AHP, ELECTRE III, PROMETHEE II and Compromise Programming as MCDM techniques, and used binomial and uniform distributions to generate missing information. We considered five dam site selection situations and compared the results as they depended on both MCDM techniques and information generation methods. The binomial generation method showed the most obvious priorities. All MCDM techniques showed similar priorities in the dam site selection results except for ELECTREE III. The results demonstrate that selecting an appropriate MCDM technique is more important than the data generation method. However, using binomial distribution to generate missing information is more effective in providing a robust priority than uniform distribution, which is a commonly used technique.

National Options for a Sustainable Nuclear Energy System: MCDM Evaluation Using an Improved Integrated Weighting Approach

Directory of Open Access Journals (Sweden)

Ruxing Gao

2017-12-01

Full Text Available While the prospects look bright for nuclear energy development in China, no consensus about an optimum transitional path towards sustainability of the nuclear fuel cycle has been achieved. Herein, we present a preliminary study of decision making for China’s future nuclear energy systems, combined with a dynamic analysis model. In terms of sustainability assessment based on environmental, economic, and social considerations, we compared and ranked the four candidate options of nuclear fuel cycles combined with an integrated evaluation analysis using the Multi-Criteria Decision Making (MCDM method. An improved integrated weighting method was first applied in the nuclear fuel cycle evaluation study. This method synthesizes diverse subjective/objective weighting methods to evaluate conflicting criteria among the competing decision makers at different levels of expertise and experience. The results suggest that the fuel cycle option of direct recycling of spent fuel through fast reactors is the most competitive candidate, while the fuel cycle option of direct disposal of all spent fuel without recycling is the least attractive for China, from a sustainability perspective. In summary, this study provided a well-informed decision-making tool to support the development of national nuclear energy strategies.

A hybrid MCDM framework combined with DEMATEL-based ANP to evaluate enterprise technological innovation capabilities assessment

Directory of Open Access Journals (Sweden)

Meng-Jong Kuan

2014-08-01

Full Text Available The efficient evaluation of technological innovation capabilities of enterprises is an important factor to enhance competitiveness. This paper aims to assess and to rank technological innovation evaluation criteria in order to provide a practical insight of systematic analysis by gathering the qualified experts’ opinions combined with three methods of multi-criteria decision making approach. A framework is proposed and uses a novel hybrid multiple criteria decision-making (MCDM model to address the dependence relationships of criteria with the aid of the Decision-Making Trial and Evaluation Laboratory (DEMATEL, analytical network process (ANP and VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje. The study reports that the interaction between criteria is essential and influences technological innovation capabilities; furthermore, this ranking development of technological innovation capabilities assessment is also one of key management tools for managements of other related high- tech enterprises. Managers can then judge the need to improve and determine which criteria provide the most effective direction towards improvement.

A Multi-criteria neutrosophic group decision making metod based TOPSIS for supplier selection

OpenAIRE

Şahin, Rıdvan; Yiğider, Muhammed

2014-01-01

The process of multiple criteria decision making (MCDM) is of determining the best choice among all of the probable alternatives. The problem of supplier selection on which decision maker has usually vague and imprecise knowledge is a typical example of multi criteria group decision-making problem. The conventional crisp techniques has not much effective for solving MCDM problems because of imprecise or fuzziness nature of the linguistic assessments. To find the exact values for MCDM problems...

Multi-criteria decision making for water resource management: a ...

African Journals Online (AJOL)

2010-01-04

Jan 4, 2010 ... reliable information about the river basin in terms of physical, hydrological ... decision making (MCDM) methods to cope with water-related problems in .... tial tool to account for water availability and demand scenar- ios, and ...

A comparative analysis of different hybrid MCDM techniques considering a case of selection of 3D printers

Directory of Open Access Journals (Sweden)

Debapriyo Paul

2015-07-01

Full Text Available A multitude of techniques fall under the domain of Multi- Criteria Decision Making (MCDM which is used to select the best alternative among the available ones. The objective of this paper is to compare some of these techniques with respect to the problem of selection of 3D printers, which is associated with multiple attributes. The weights of the criteria were determined using analytical network process (ANP. Next, the alternatives were ranked using three different MCDM techniques- 1.TOPSIS which ranks alternatives having the shortest distance to the ideal solution as well as the greatest distance from the negative-ideal solution 2. Deng’s Similarity based Approach where the most preferred alternative should have the highest degree of similarity to the positive ideal solution and the lowest degree of similarity to the negative-ideal solution and 3.PROMETHEE and GAIA. The solutions for each of these three cases were analyzed thoroughly, and reasons for any deviations were discussed.

An Exploratory Analysis for the Selection and Implementation of Advanced Manufacturing Technology by Fuzzy Multi-criteria Decision Making Methods: A Comparative Study

Science.gov (United States)

Nath, Surajit; Sarkar, Bijan

2017-08-01

Advanced Manufacturing Technologies (AMTs) offer opportunities for the manufacturing organizations to excel their competitiveness and in turn their effectiveness in manufacturing. Proper selection and evaluation of AMTs is the most significant task in today's modern world. But this involves a lot of uncertainty and vagueness as it requires many conflicting criteria to deal with. So the task of selection and evaluation of AMTs becomes very tedious for the evaluators as they are not able to provide crisp data for the criteria. Different Fuzzy Multi-criteria Decision Making (MCDM) methods help greatly in dealing with this problem. This paper focuses on the application of two very much potential Fuzzy MCDM methods namely COPRAS-G, EVAMIX and a comparative study between them on some rarely mentioned criteria. Each of the two methods is very powerful evaluation tool and has beauty in its own. Although, performance wise these two methods are almost at same level, but, the approach of each one of them are quite unique. This uniqueness is revealed by introducing a numerical example of selection of AMT.

PENGAMBILAN KEPUTUSAN KRITERIA JAMAK (MCDM UNTUK PEMILIHAN LOKASI FLOATING STORAGE AND REGASIFICATION UNIT (FSRU: STUDI KASUS SUPLAI LNG DARI LADANG TANGGUH KE BALI

Directory of Open Access Journals (Sweden)

Ketut Buda Artana

2008-01-01

Full Text Available This paper presents a case study in selecting the best location for a Floating Storage and Regasification Unit (FSRU in Bali. FSRU is an alternative to replace a conventional shore LNG terminal. The selection involves several criteria/attributes that can be grouped into two general criteria, namely qualitative and quantitative criteria. Multiple Criteria Decision Making (MCDM approach is utilized to solve the selection problem, considering the capability of this method in solving multi-criteria problem with mutual conflict. Qualitative criteria are evaluated using AHP method to calculate weight of each criterion. Moreover, decision matrix algorithm is then utilized to convert preference of stakeholders into, consecutively, probability assignment, total probability assignment and preference degree eventually. Quantitative criteria are also converted into preference degree and entropy method is used to rank the alternatives. Selected location would be the alternative having the highest entropy. Four alternatives are under consideration. Those alternatives are Benoa, Celukan Bawang, Pemaron and Gilimanuk. This research found that Celukan Bawang is the best location for the FSRU. Abstract in Bahasa Indonesia: Paper ini menyajikan pemilihan lokasi Floating Storage and Regasification Unit (FSRU untuk proses distribusi LNG dari Ladang Tangguh ke Bali. FSRU merupakan alternatif pengganti LNG receiving terminal di darat. Pemilihan lokasi ini melibatkan kriteria kualitatif dan kuantitatif dan metode Multiple Criteria Decision Making (MCDM digunakan untuk melakukan pemilihan mengingat metode ini dapat memberi solusi tepat saat mutual conflict terjadi pada beberapa kriteria pemilihan. Penilaian terhadap beberapa alternatif didasarkan atas nilai masing-masing kriteria yang diperoleh dari kuisioner terhadap beberapa stakeholders. Untuk kriteria kualitatif dicari relative weight dengan menggunakan metode Analitik Hierarki Proses (AHP. Nilai relative weight ini

Using multi-criteria decision making for selection of the optimal strategy for municipal solid waste management.

Science.gov (United States)

Jovanovic, Sasa; Savic, Slobodan; Jovicic, Nebojsa; Boskovic, Goran; Djordjevic, Zorica

2016-09-01

Multi-criteria decision making (MCDM) is a relatively new tool for decision makers who deal with numerous and often contradictory factors during their decision making process. This paper presents a procedure to choose the optimal municipal solid waste (MSW) management system for the area of the city of Kragujevac (Republic of Serbia) based on the MCDM method. Two methods of multiple attribute decision making, i.e. SAW (simple additive weighting method) and TOPSIS (technique for order preference by similarity to ideal solution), respectively, were used to compare the proposed waste management strategies (WMS). Each of the created strategies was simulated using the software package IWM2. Total values for eight chosen parameters were calculated for all the strategies. Contribution of each of the six waste treatment options was valorized. The SAW analysis was used to obtain the sum characteristics for all the waste management treatment strategies and they were ranked accordingly. The TOPSIS method was used to calculate the relative closeness factors to the ideal solution for all the alternatives. Then, the proposed strategies were ranked in form of tables and diagrams obtained based on both MCDM methods. As shown in this paper, the results were in good agreement, which additionally confirmed and facilitated the choice of the optimal MSW management strategy. © The Author(s) 2016.

A novel sustainable decision making model for municipal solid waste management

International Nuclear Information System (INIS)

Hung, M.-L.; Ma Hwongwen; Yang, W.-F.

2007-01-01

This paper reviews several models developed to support decision making in municipal solid waste management (MSWM). The concepts underlying sustainable MSWM models can be divided into two categories: one incorporates social factors into decision making methods, and the other includes public participation in the decision-making process. The public is only apprised or takes part in discussion, and has little effect on decision making in most research efforts. Few studies have considered public participation in the decision-making process, and the methods have sought to strike a compromise between concerned criteria, not between stakeholders. However, the source of the conflict arises from the stakeholders' complex web of value. Such conflict affects the feasibility of implementing any decision. The purpose of this study is to develop a sustainable decision making model for MSWM to overcome these shortcomings. The proposed model combines multicriteria decision making (MCDM) and a consensus analysis model (CAM). The CAM is built up to aid in decision-making when MCDM methods are utilized and, subsequently, a novel sustainable decision making model for MSWM is developed. The main feature of CAM is the assessment of the degree of consensus between stakeholders for particular alternatives. A case study for food waste management in Taiwan is presented to demonstrate the practicality of this model

IDENTIFYING HIGH-RISK POPULATIONS OF TUBERCULOSIS USING ENVIRONMENTAL FACTORS AND GIS BASED MULTI-CRITERIA DECISION MAKING METHOD

Directory of Open Access Journals (Sweden)

A. R. Abdul Rasam

2016-09-01

Full Text Available Development of an innovative method to enhance the detection of tuberculosis (TB in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1 to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

Application of MCDM based hybrid optimization tool during turning of ASTM A588

Directory of Open Access Journals (Sweden)

Himadri Majumder

2017-07-01

Full Text Available Multi-criteria decision making approach is one of the most troublesome tools for solving the tangled optimization problems in the machining area due to its capability of solving the complex optimization problems in the production process. Turning is widely used in the manufacturing processes as it offers enormous advantages like good quality product, customer satisfaction, economical and relatively easy to apply. A contemporary approach, MOORA coupled with PCA, was used to ascertain an optimal combination of input parameters (spindle speed, depth of cut and feed rate for the given output parameters (power consumption, average surface roughness and frequency of tool vibration using L27 orthogonal array for turning on ASTM A588 mild steel. Comparison between MOORA-PCA and TOPSIS-PCA shows the effectiveness of MOORA over TOPSIS method. The optimum parameter combination for multi-performance characteristics has been established for ASTM A588 mild steel are spindle speed 160 rpm, depth of cut 0.1 mm and feed rate 0.08 mm/rev. Therefore, this study focuses on the application of the hybrid MCDM approach as a vital selection making tool to deal with multi objective optimization problems.

Design of coordinated energy and environmental policies: use of multi-criteria decision-making

International Nuclear Information System (INIS)

Greening, L.A.; Bernow, Steve

2004-01-01

Conventional economic modeling tools that depend upon one criterion to select among possible alternatives for inclusion in an energy or environmental policy have limitations. Formulation of both sets of policies involves large numbers of stakeholders with differing views and preferences. Those views and preferences cannot always be determined in advance or with certainty since many of the attributes of these policy alternatives are non-market valued. The use of multi-criteria decision-making (MCDM) methods in an integrated assessment (IA) framework offers a far better alternative to cost/benefit and similar methods. To facilitate understanding of MCDM methods, we offer a typology for this broad class of models, suggest some of the types of problems that may be analyzed with these methods, and recommend the implementation of several MCDM methods in currently evolving IA frameworks. Depending upon the choice of method from this family of methods, a wide range of attributes associated with multi-pollutant reduction and energy system development strategies, and a diversity of stakeholder preferences may be incorporated into the analysis. The resulting policy space can then provide a basis for comparison and selection of policy alternatives in a political or negotiated process

12th International Conference on Multiple Criteria Decision Making

CERN Document Server

Gal, Tomas

1997-01-01

The organizers of the 12th International Conference on Multiple Cri­ teria Decision Making (MCDM) held June 19-23, 1995 in Hagen received the second time the opportunity to prepare an international conference on MCDM in Germany; the first opportunity has been the 3rd International Conference on MCDM in Konigswinter, 1979. Quite a time ellapsed since then and therefore it might be interesting to compare some indicators of the development of the International Society on MCDM, which has been founded in Konigswinter. Stanley Zionts has been elected first president and all 44 participants of that Conference became founding members. Today our Society has over 1200 members and its own Journal (MCDM World Scan). In Hagen, 1996, we had 152 participants from 34 countries. It is interesting to mention that also other Groups established their organi­ zation, like the European Working Group on Multiple Criteria Decision Aid, the German Working Group on Decision Theory and Applications, the Multi­ Objective Programming ...

Investigating the Effect of Normalization Norms in Flexible Manufacturing Sytem Selection Using Multi-Criteria Decision-Making Methods

Directory of Open Access Journals (Sweden)

Prasenjit Chatterjee

2014-07-01

Full Text Available The main objective of this paper is to assess the effect of different normalization norms within multi-criteria decisionmaking (MADM models. Three well accepted MCDM tools, namely, preference ranking organization method for enrichment evaluation (PROMETHEE, grey relation analysis (GRA and technique for order preference by similarity to ideal solution (TOPSIS methods are applied for solving a flexible manufacturing system (FMS selection problem in a discrete manufacturing environment. Finally, by the introduction of different normalization norms to the decision algorithms, its effct on the FMS selection problem using these MCDM models are also studied.

A multi-criteria decision making approach to balance water supply-demand strategies in water supply systems

Directory of Open Access Journals (Sweden)

Géssica Maria Cambrainha

2018-02-01

Full Text Available Abstract Paper aims this paper proposes a model to aid a group of decision makers to establish a portfolio of feasible actions (alternatives that are able to balance water supply-demand strategies. Originality Long periods of water shortages cause problems in semi-arid region of northeast Brazil, which affects different sectors such as food, public health, among others. This problem situation is intensified by population growth. Therefore, this type of decision making is complex, and it needs to be solving by a structured model. Research method The model is based on a problem structuring method (PSM and a multi-criteria decision making (MCDM method. Main findings Due to society and government influences, the proposed model showed appropriate to conduct a robust and well-structured decision making. Implications for theory and practice The main contributions were the study in regions suffering from drought and water scarcity, as well as the combination of PSM and MCDM methods to aid in this problem.

A two-phased multi-criteria decision-making approach for selecting the best smartphone

Directory of Open Access Journals (Sweden)

Yildiz, Aytac

2015-11-01

Full Text Available In the last 20 years, rapid and significant developments have occurred in communication and information technologies. In parallel with these developments, the importance of smartphones has increased. In addition, many smartphone manufacturers have launched and continue to launch a number of new models with many features. People who want to buy a new smartphone have difficulties selecting the best smartphone among the numerous models available on the technology markets. Therefore, smartphone selection has become a complex multi-criteria decision-making (MCDM problem for people. Hence, decision-making processes will be facilitated by using MCDM methods, and these will provide the most appropriate decision. In this paper, the best smartphone among the 28 alternatives determined by the person who will buy them are selected by using three main criteria and 17 sub-criteria with the help of a two-phased MCDM approach. In the first phase, 28 smartphone alternatives are ranked using the analytic network process (ANP. In the second phase, a model that includes the best four alternatives of ANP is created. Afterwards, the best smartphone is selected using the generalised Choquet integral (GCI method according to this model. Finally, the findings and the results are given.

Permutation based decision making under fuzzy environment using Tabu search

Directory of Open Access Journals (Sweden)

Mahdi Bashiri

2012-04-01

Full Text Available One of the techniques, which are used for Multiple Criteria Decision Making (MCDM is the permutation. In the classical form of permutation, it is assumed that weights and decision matrix components are crisp. However, when group decision making is under consideration and decision makers could not agree on a crisp value for weights and decision matrix components, fuzzy numbers should be used. In this article, the fuzzy permutation technique for MCDM problems has been explained. The main deficiency of permutation is its big computational time, so a Tabu Search (TS based algorithm has been proposed to reduce the computational time. A numerical example has illustrated the proposed approach clearly. Then, some benchmark instances extracted from literature are solved by proposed TS. The analyses of the results show the proper performance of the proposed method.

Prioritization of Bioethanol Production Pathways in China based on Life Cycle Sustainability Assessment and Multi-Criteria Decision-Making

DEFF Research Database (Denmark)

Ren, Jingzheng; Manzardo, Alessandro; Mazzi, Anna

2015-01-01

Purpose The study objectives are two-fold: (i) combining the life cycle sustainability assessment (LCSA) framework and the multi-criteria decision-making (MCDM) methodology for sustainability assessment; (ii) determining the most sustainable scenario for bioethanol production in China according......’s proposed method investigates an illustrative case about three alternative bioethanol production scenarios (wheat-based, corn-based and cassava-based): the prior sequence (based on the sustainability performances) in descending order is cassava-based, corn-based and wheat-based. The proposed methodology...... is to test the combination of a MCDM methodology and LCSA for sustainability decision-making by studying three alternative pathways for bioethanol production in China. The proposed method feasibly enables the decision-makers/stakeholders to find the most sustainable scenario to achieve their objectives among...

A Hybrid Multiple Criteria Decision Making Model for Supplier Selection

Directory of Open Access Journals (Sweden)

Chung-Min Wu

2013-01-01

Full Text Available The sustainable supplier selection would be the vital part in the management of a sustainable supply chain. In this study, a hybrid multiple criteria decision making (MCDM model is applied to select optimal supplier. The fuzzy Delphi method, which can lead to better criteria selection, is used to modify criteria. Considering the interdependence among the selection criteria, analytic network process (ANP is then used to obtain their weights. To avoid calculation and additional pairwise comparisons of ANP, a technique for order preference by similarity to ideal solution (TOPSIS is used to rank the alternatives. The use of a combination of the fuzzy Delphi method, ANP, and TOPSIS, proposing an MCDM model for supplier selection, and applying these to a real case are the unique features of this study.

Using MACBETH method for supplier selection in manufacturing environment

Directory of Open Access Journals (Sweden)

Prasad Karande

2013-04-01

Full Text Available Supplier selection is always found to be a complex decision-making problem in manufacturing environment. The presence of several independent and conflicting evaluation criteria, either qualitative or quantitative, makes the supplier selection problem a candidate to be solved by multi-criteria decision-making (MCDM methods. Even several MCDM methods have already been proposed for solving the supplier selection problems, the need for an efficient method that can deal with qualitative judgments related to supplier selection still persists. In this paper, the applicability and usefulness of measuring attractiveness by a categorical-based evaluation technique (MACBETH is demonstrated to act as a decision support tool while solving two real time supplier selection problems having qualitative performance measures. The ability of MACBETH method to quantify the qualitative performance measures helps to provide a numerical judgment scale for ranking the alternative suppliers and selecting the best one. The results obtained from MACBETH method exactly corroborate with those derived by the past researchers employing different mathematical approaches.

Multi-criteria decision making--an approach to setting priorities in health care.

Science.gov (United States)

Nobre, F F; Trotta, L T; Gomes, L F

1999-12-15

The objective of this paper is to present a multi-criteria decision making (MCDM) approach to support public health decision making that takes into consideration the fuzziness of the decision goals and the behavioural aspect of the decision maker. The approach is used to analyse the process of health technology procurement in a University Hospital in Rio de Janeiro, Brazil. The method, known as TODIM, relies on evaluating alternatives with a set of decision criteria assessed using an ordinal scale. Fuzziness in generating criteria scores and weights or conflicts caused by dealing with different viewpoints of a group of decision makers (DMs) are solved using fuzzy set aggregation rules. The results suggested that MCDM models, incorporating fuzzy set approaches, should form a set of tools for public health decision making analysis, particularly when there are polarized opinions and conflicting objectives from the DM group. Copyright 1999 John Wiley & Sons, Ltd.

Review Article: Multi-criteria decision making for flood risk management: a survey of the current state-of-the-art

Science.gov (United States)

de Brito, M. M.; Evers, M.

2015-11-01

This paper provides a review of Multi-Criteria Decision Making (MCDM) applications to flood risk management, seeking to highlight trends and identify research gaps. Totally, 128 peer-reviewed papers published from 1995 to June 2015 were systematically analysed and classified into the following application areas: (1) ranking of alternatives for flood mitigation, (2) reservoir flood control, (3) susceptibility, (4) hazard, (5) vulnerability, (6) risk, (7) coping capacity, and (8) emergency management. Additionally, the articles were categorized based on the publication year, MCDM method, whether they were or were not carried out in a participatory process, and if uncertainty and sensitivity analysis were performed. Results showed that the number of flood MCDM publications has exponentially grown during this period, with over 82 % of all papers published since 2009. The Analytical Hierarchy Process (AHP) was the most popular technique, followed by Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS), and Simple Additive Weighting (SAW). Although there is greater interest on MCDM, uncertainty analysis remains an issue and is seldom applied in flood-related studies. In addition, participation of multiple stakeholders has been generally fragmented, focusing on particular stages of the decision-making process, especially on the definition of criteria weights. Based on the survey, some suggestions for further investigation are provided.

Identification of drought in Dhalai river watershed using MCDM and ANN models

Science.gov (United States)

Aher, Sainath; Shinde, Sambhaji; Guha, Shantamoy; Majumder, Mrinmoy

2017-03-01

An innovative approach for drought identification is developed using Multi-Criteria Decision Making (MCDM) and Artificial Neural Network (ANN) models from surveyed drought parameter data around the Dhalai river watershed in Tripura hinterlands, India. Total eight drought parameters, i.e., precipitation, soil moisture, evapotranspiration, vegetation canopy, cropping pattern, temperature, cultivated land, and groundwater level were obtained from expert, literature and cultivator survey. Then, the Analytic Hierarchy Process (AHP) and Analytic Network Process (ANP) were used for weighting of parameters and Drought Index Identification (DII). Field data of weighted parameters in the meso scale Dhalai River watershed were collected and used to train the ANN model. The developed ANN model was used in the same watershed for identification of drought. Results indicate that the Limited-Memory Quasi-Newton algorithm was better than the commonly used training method. Results obtained from the ANN model shows the drought index developed from the study area ranges from 0.32 to 0.72. Overall analysis revealed that, with appropriate training, the ANN model can be used in the areas where the model is calibrated, or other areas where the range of input parameters is similar to the calibrated region for drought identification.

A MOORA based fuzzy multi-criteria decision making approach for supply chain strategy selection

Directory of Open Access Journals (Sweden)

Bijan Sarkar

2012-08-01

Full Text Available To acquire the competitive advantages in order to survive in the global business scenario, modern companies are now facing the problems of selecting key supply chain strategies. Strategy selection becomes difficult as the number of alternatives and conflicting criteria increases. Multi criteria decision making (MCDM methodologies help the supply chain managers take a lead in a complex industrial set-up. The present investigation applies fuzzy MCDM technique entailing multi-objective optimization on the basis of ratio analysis (MOORA in selection of alternatives in a supply chain. The MOORA method is utilized to three suitable numerical examples for the selection of supply chain strategies (warehouse location selection and vendor/supplier selection. The results obtained by using current approach almost match with those of previous research works published in various open journals. The empirical study has demonstrated the simplicity and applicability of this method as a strategic decision making tool in a supply chain.

A Hybrid MCDM Approach for Strategic Project Portfolio Selection of Agro By-Products

Directory of Open Access Journals (Sweden)

Animesh Debnath

2017-07-01

Full Text Available Due to the increasing size of the population, society faces several challenges for sustainable and adequate agricultural production, quality, distribution, and food safety in the strategic project portfolio selection (SPPS. The initial adaptation of strategic portfolio management of genetically modified (GM Agro by-products (Ab-Ps is a huge challenge in terms of processing the agro food product supply-chain practices in an environmentally nonthreatening way. As a solution to the challenges, the socio-economic characteristics for SPPS of GM food purchasing scenarios are studied. Evaluation and selection of the GM agro portfolio management are the dynamic issues due to physical and immaterial criteria involving a hybrid multiple criteria decision making (MCDM approach, combining modified grey Decision-Making Trial and Evaluation Laboratory (DEMATEL, Multi-Attributive Border Approximation area Comparison (MABAC and sensitivity analysis. Evaluation criteria are grouped into social, differential and beneficial clusters, and the modified DEMATEL procedure is used to derive the criteria weights. The MABAC method is applied to rank the strategic project portfolios according to the aggregated preferences of decision makers (DMs. The usefulness of the proposed research framework is validated with a case study. The GM by-products are found to be the best portfolio. Moreover, this framework can unify the policies of agro technological improvement, corporate social responsibility (CSR and agro export promotion.

Detailed Sponge City Planning Based on Hierarchical Fuzzy Decision-Making: A Case Study on Yangchen Lake

Directory of Open Access Journals (Sweden)

Junyu Zhang

2017-11-01

Full Text Available We proposed a Hierarchical Fuzzy Inference System (HFIS framework to offer better decision supports with fewer user-defined data (uncertainty. The framework consists two parts: a fuzzified Geographic Information System (GIS and a HFIS system. The former provides comprehensive information on the criterion unit and the latter helps in making more robust decisions. The HFIS and the traditional Multi-Criteria Decision Making (MCDM method were applied to a case study and compared. The fuzzified GIS maps maintained a majority of the dominant characteristics of the criterion unit but also revealed some non-significant information according to the surrounding environment. The urban planning map generated by the two methods shares similar strategy choices (6% difference, while the spatial distribution of strategies shares 69.7% in common. The HFIS required fewer subjective decisions than the MCDM (34 user-defined decision rules vs. 141 manual evaluations.

Evaluating construction projects of hotels based on environmental sustainability with MCDM framework

Directory of Open Access Journals (Sweden)

Sarfaraz Hashemkhani Zolfani

2018-03-01

Full Text Available Environmental issues have got incredible attention among daily life activities. Sustainability penetrated in all society practices specially construction industry due to its substantial impact on the environment. Monitoring and controlling architectural project contains a decision problem with multi-varieties analysis. This study aimed to evaluate construction projects of hotels regarding environmental sustainability. To this end, a hybrid Multiple Criteria Decision Making (MCDM model is proposed. Step‐wise Weight Assessment Ratio Analysis (SWARA and Complex proportional assessment (COPRAS compose a unified framework. A private construction project is supposed as a case study. The project is based on establishing a five star hotel in Tehran, Iran. In this research SWARA produces criteria weights and COPRAS will rank decision alternatives. This study can be a strategic route for other similar researches in other fields. Keywords: Architecture projects, Sustainability, Environmental sustainability, SWARA, COPRAS

Multi-criteria decision-making for flood risk management: a survey of the current state of the art

Science.gov (United States)

Madruga de Brito, Mariana; Evers, Mariele

2016-04-01

This paper provides a review of multi-criteria decision-making (MCDM) applications to flood risk management, seeking to highlight trends and identify research gaps. A total of 128 peer-reviewed papers published from 1995 to June 2015 were systematically analysed. Results showed that the number of flood MCDM publications has exponentially grown during this period, with over 82 % of all papers published since 2009. A wide range of applications were identified, with most papers focusing on ranking alternatives for flood mitigation, followed by risk, hazard, and vulnerability assessment. The analytical hierarchy process (AHP) was the most popular method, followed by Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS), and Simple Additive Weighting (SAW). Although there is greater interest in MCDM, uncertainty analysis remains an issue and was seldom applied in flood-related studies. In addition, participation of multiple stakeholders has been generally fragmented, focusing on particular stages of the decision-making process, especially on the definition of criteria weights. Therefore, addressing the uncertainties around stakeholders' judgments and endorsing an active participation in all steps of the decision-making process should be explored in future applications. This could help to increase the quality of decisions and the implementation of chosen measures.

Application of an integrated multi-criteria decision making AHP-TOPSIS methodology for ETL software selection.

Science.gov (United States)

Hanine, Mohamed; Boutkhoum, Omar; Tikniouine, Abdessadek; Agouti, Tarik

2016-01-01

Actually, a set of ETL software (Extract, Transform and Load) is available to constitute a major investment market. Each ETL uses its own techniques for extracting, transforming and loading data into data warehouse, which makes the task of evaluating ETL software very difficult. However, choosing the right software of ETL is critical to the success or failure of any Business Intelligence project. As there are many impacting factors in the selection of ETL software, the same process is considered as a complex multi-criteria decision making (MCDM) problem. In this study, an application of decision-making methodology that employs the two well-known MCDM techniques, namely Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods is designed. In this respect, the aim of using AHP is to analyze the structure of the ETL software selection problem and obtain weights of the selected criteria. Then, TOPSIS technique is used to calculate the alternatives' ratings. An example is given to illustrate the proposed methodology. Finally, a software prototype for demonstrating both methods is implemented.

Decision process in MCDM with large number of criteria and heterogeneous risk preferences

Directory of Open Access Journals (Sweden)

Jian Liu

Full Text Available A new decision process is proposed to address the challenge that a large number criteria in the multi-criteria decision making (MCDM problem and the decision makers with heterogeneous risk preferences. First, from the perspective of objective data, the effective criteria are extracted based on the similarity relations between criterion values and the criteria are weighted, respectively. Second, the corresponding types of theoretic model of risk preferences expectations will be built, based on the possibility and similarity between criterion values to solve the problem for different interval numbers with the same expectation. Then, the risk preferences (Risk-seeking, risk-neutral and risk-aversion will be embedded in the decision process. Later, the optimal decision object is selected according to the risk preferences of decision makers based on the corresponding theoretic model. Finally, a new algorithm of information aggregation model is proposed based on fairness maximization of decision results for the group decision, considering the coexistence of decision makers with heterogeneous risk preferences. The scientific rationality verification of this new method is given through the analysis of real case. Keywords: Heterogeneous, Risk preferences, Fairness, Decision process, Group decision

A fuzzy logic based PROMETHEE method for material selection problems

Directory of Open Access Journals (Sweden)

Muhammet Gul

2018-03-01

Full Text Available Material selection is a complex problem in the design and development of products for diverse engineering applications. This paper presents a fuzzy PROMETHEE (Preference Ranking Organization Method for Enrichment Evaluation method based on trapezoidal fuzzy interval numbers that can be applied to the selection of materials for an automotive instrument panel. Also, it presents uniqueness in making a significant contribution to the literature in terms of the application of fuzzy decision-making approach to material selection problems. The method is illustrated, validated, and compared against three different fuzzy MCDM methods (fuzzy VIKOR, fuzzy TOPSIS, and fuzzy ELECTRE in terms of its ranking performance. Also, the relationships between the compared methods and the proposed scenarios for fuzzy PROMETHEE are evaluated via the Spearman’s correlation coefficient. Styrene Maleic Anhydride and Polypropylene are determined optionally as suitable materials for the automotive instrument panel case. We propose a generic fuzzy MCDM methodology that can be practically implemented to material selection problem. The main advantages of the methodology are consideration of the vagueness, uncertainty, and fuzziness to decision making environment.

Application of ANP and DEMATEL to evaluate the decision-making of municipal solid waste management in Metro Manila.

Science.gov (United States)

Tseng, Ming-Lang

2009-09-01

A municipal solid waste management (MSW) expert group was consulted in order to mirror how government officials might reach an effective solution regarding municipal solid waste management in Metro Manila. A critical issue regarding this is how the expert group can better evaluate and select a favorable MSW management solution using a series of criteria. MSW management solution selection is a multiple criteria decision-making (MCDM) problem, which requires the consideration of a large number of complex criteria. A robust MCDM method should consider the interactions among these criteria. The analytic network process (ANP) is a relatively new MCDM method which can deal with all kinds of interactions systematically. The Decision Making Trial and Evaluation Laboratory (DEMATEL) not only can convert the relations between cause and effect of criteria into a structural model, but also can be used as a way to handle the inner dependences within a set of criteria. Hence, this paper applies an effective solution based on a combined ANP and DEMATEL method to assist the expert group evaluating different MSW management solutions. According to the results, the best solution is for each city to have its own type of thermal process technology and resource recovery facility before landfill rather than entering a joint venture with enterprises or going into build-operate-transfer projects in order to be able to construct thermal process technologies and resource recovery facilities.

A Combined Fuzzy-AHP and Fuzzy-GRA Methodology for Hydrogen Energy Storage Method Selection in Turkey

Directory of Open Access Journals (Sweden)

Aytac Yildiz

2013-06-01

Full Text Available In this paper, we aim to select the most appropriate Hydrogen Energy Storage (HES method for Turkey from among the alternatives of tank, metal hydride and chemical storage, which are determined based on expert opinions and literature review. Thus, we propose a Buckley extension based fuzzy Analytical Hierarchical Process (Fuzzy-AHP and linear normalization based fuzzy Grey Relational Analysis (Fuzzy-GRA combined Multi Criteria Decision Making (MCDM methodology. This combined approach can be applied to a complex decision process, which often makes sense with subjective data or vague information; and used to solve to solve HES selection problem with different defuzzification methods. The proposed approach is unique both in the HES literature and the MCDM literature.

An application of a hybrid MCDM method for the evaluation of entrepreneurial intensity among the SMEs: a case study.

Science.gov (United States)

Rostamzadeh, Reza; Ismail, Kamariah; Bodaghi Khajeh Noubar, Hossein

2014-01-01

This study presents one of the first attempts to focus on critical success factors influencing the entrepreneurial intensity of Malaysian small and medium sized enterprises (SMEs) as they attempt to expand internationally. The aim of this paper is to evaluate and prioritize the entrepreneurial intensity among the SMEs using multicriteria decision (MCDM) techniques. In this research FAHP is used for finding the weights of criteria and subcriteria. Then for the final ranking of the companies, VIKOR (in Serbian: VlseKriterijumska Optimizacija I Kompromisno Resenje) method was used. Also, as an additional tool, TOPSIS technique, is used to see the differences of two methods applied over the same data. 5 main criteria and 14 subcriteria were developed and implemented in the real-world cases. As the results showed, two ranking methods provided different ranking. Furthermore, the final findings of the research based on VIKOR and TOPSIS indicated that the firms A3 and A4 received the first rank, respectively. In addition, the firm A4 was known as the most entrepreneurial company. This research has been done in the manufacturing sector, but it could be also extended to the service sector for measurement.

Estimating the Technical Potential of Grid-Connected PV Systems in Indonesia : A Comparison of a Method Based on Open Access Data with a Method Based on GIS

NARCIS (Netherlands)

Kunaifi, Kunaifi; Reinders, Angelina H.M.E.; Smets, Arno

2017-01-01

In this paper, we compare two methods for estimating the technical potential of grid-connected PV systems in Indonesia. One was a method developed by Veldhuis and Renders [1] and the other is a new method using Geographic Information System (GIS) and multi-criteria decision making (MCDM). The first

An Evaluation Model of Quantitative and Qualitative Fuzzy Multi-Criteria Decision-Making Approach for Location Selection of Transshipment Ports

Directory of Open Access Journals (Sweden)

Ji-Feng Ding

2013-01-01

Full Text Available The role of container logistics centre as home bases for merchandise transportation has become increasingly important. The container carriers need to select a suitable centre location of transshipment port to meet the requirements of container shipping logistics. In the light of this, the main purpose of this paper is to develop a fuzzy multi-criteria decision-making (MCDM model to evaluate the best selection of transshipment ports for container carriers. At first, some concepts and methods used to develop the proposed model are briefly introduced. The performance values of quantitative and qualitative subcriteria are discussed to evaluate the fuzzy ratings. Then, the ideal and anti-ideal concepts and the modified distance measure method are used in the proposed model. Finally, a step-by-step example is illustrated to study the computational process of the quantitative and qualitative fuzzy MCDM model. The proposed approach has successfully accomplished our goal. In addition, the proposed fuzzy MCDM model can be empirically employed to select the best location of transshipment port for container carriers in the future study.

An Integrated DEMATEL-VIKOR Method-Based Approach for Cotton Fibre Selection and Evaluation

Science.gov (United States)

Chakraborty, Shankar; Chatterjee, Prasenjit; Prasad, Kanika

2018-01-01

Selection of the most appropriate cotton fibre type for yarn manufacturing is often treated as a multi-criteria decision-making (MCDM) problem as the optimal selection decision needs to be taken in presence of several conflicting fibre properties. In this paper, two popular MCDM methods in the form of decision making trial and evaluation laboratory (DEMATEL) and VIse Kriterijumska Optimizacija kompromisno Resenje (VIKOR) are integrated to aid the cotton fibre selection decision. DEMATEL method addresses the interrelationships between various physical properties of cotton fibres while segregating them into cause and effect groups, whereas, VIKOR method helps in ranking all the considered 17 cotton fibres from the best to the worst. The derived ranking of cotton fibre alternatives closely matches with that obtained by the past researchers. This model can assist the spinning industry personnel in the blending process while making accurate fibre selection decision when cotton fibre properties are numerous and interrelated.

A Fuzzy MCDM Approach for Green Supplier Selection from the Economic and Environmental Aspects

Directory of Open Access Journals (Sweden)

Hsiu Mei Wang Chen

2016-01-01

Full Text Available Due to the challenge of rising public awareness of environmental issues and governmental regulations, green supply chain management (SCM has become an important issue for companies to gain environmental sustainability. Supplier selection is one of the key operational tasks necessary to construct a green SCM. To select the most suitable suppliers, many economic and environmental criteria must be considered in the decision process. Although numerous studies have used economic criteria such as cost, quality, and lead time in the supplier selection process, only some studies have taken into account the environmental issues. This study proposes a comprehensive fuzzy multicriteria decision making (MCDM approach for green supplier selection and evaluation, using both economic and environmental criteria. In the proposed approach, a fuzzy analytic hierarchy process (AHP is employed to determine the important weights of criteria under vague environment. In addition, a fuzzy technique for order performance by similarity to ideal solution (TOPSIS is used to evaluate and rank the potential suppliers. Finally, a case study in Luminance Enhancement Film (LEF industry is presented to illustrate the applicability and efficiency of the proposed method.

WeightLifter: Visual Weight Space Exploration for Multi-Criteria Decision Making.

Science.gov (United States)

Pajer, Stephan; Streit, Marc; Torsney-Weir, Thomas; Spechtenhauser, Florian; Muller, Torsten; Piringer, Harald

2017-01-01

A common strategy in Multi-Criteria Decision Making (MCDM) is to rank alternative solutions by weighted summary scores. Weights, however, are often abstract to the decision maker and can only be set by vague intuition. While previous work supports a point-wise exploration of weight spaces, we argue that MCDM can benefit from a regional and global visual analysis of weight spaces. Our main contribution is WeightLifter, a novel interactive visualization technique for weight-based MCDM that facilitates the exploration of weight spaces with up to ten criteria. Our technique enables users to better understand the sensitivity of a decision to changes of weights, to efficiently localize weight regions where a given solution ranks high, and to filter out solutions which do not rank high enough for any plausible combination of weights. We provide a comprehensive requirement analysis for weight-based MCDM and describe an interactive workflow that meets these requirements. For evaluation, we describe a usage scenario of WeightLifter in automotive engineering and report qualitative feedback from users of a deployed version as well as preliminary feedback from decision makers in multiple domains. This feedback confirms that WeightLifter increases both the efficiency of weight-based MCDM and the awareness of uncertainty in the ultimate decisions.

Integrated resource planning and the environment: A guide to the use of multi-criteria decision methods

Energy Technology Data Exchange (ETDEWEB)

Hobbs, B.F.; Meier, P. [IDEA, Inc., Washington, DC (United States)

1994-07-01

This report is intended as a guide to the use of multi-criteria decision-making methods (MCDM) for incorporating environmental factors in electric utility integrated resource planning (IRP). Application of MCDM is emerging as an alternative and complementary method to explicit economic valuation for weighting environmental effects. We provide a step-by-step guide to the elements that are common to all MCDM applications. The report discusses how environmental attributes should be selected and defined; how options should be selected (and how risk and uncertainty should be accounted for); how environmental impacts should be quantified (with particular attention to the problems of location); how screening should be conducted; the construction and analysis of trade-off curves; dominance analysis, which seeks to identify clearly superior options, and reject clearly inferior options; scaling of impacts, in which we translate social, economic and environmental impacts into value functions; the determination of weights, with particular emphasis on ensuring that the weights reflect the trade-offs that decision-makers are actually willing to make; the amalgamation of attributes into overall plan rankings; and the resolution of differences among methods, and between individuals. There are many MCDM methods available for accomplishing these steps. They can differ in their appropriateness, ease of use, validity, and results. This report also includes an extensive review of past applications, in which we use the step-by-step guide to examine how these applications satisfied the criteria of appropriateness, ease of use, and validity. Case material is drawn from a wide field of utility applications, ranging from project-level environmental impact statements to capacity bidding programs, and from the results of two case studies conducted as part of this research.

Applying Pareto multi-criteria decision making in concurrent engineering: A case study of polyethylene industry

Directory of Open Access Journals (Sweden)

Akbar A. Tabriz

2011-07-01

Full Text Available Concurrent engineering (CE is one of the widest known techniques for simultaneous planning of product and process design. In concurrent engineering, design processes are often complicated with multiple conflicting criteria and discrete sets of feasible alternatives. Thus multi-criteria decision making (MCDM techniques are integrated into CE to perform concurrent design. This paper proposes a design framework governed by MCDM technique, which are in conflict in the sense of competing for common resources to achieve variously different performance objectives such as financial, functional, environmental, etc. The Pareto MCDM model is applied to polyethylene pipe concurrent design governed by four criteria to determine the best alternative design to Pareto-compromise design.

A COMBINED FUZZY MCDM APPROACH FOR IDENTIFYING THE SUITABLE LANDS FOR URBAN DEVELOPMENT: AN EXAMPLE FROM BANDAR ABBS, IRAN

Directory of Open Access Journals (Sweden)

Mohsen Dadras

2014-01-01

Full Text Available This study aims at identifying the suitable lands for urban dev elopment in Bandar Abbas city based on its real world use regarding specific crite ria and sub-criteria. The city of Bandar Abbas is considered as the most important commer cial and economic city of Iran. It is also considered as one of the major cities of Iran which has played a pivotal role in the country's development and progress in recen t years especially after the end of Iran-Iraq war owing to its embracing the country's m ain commercial ports. This process has caused the immigration rate into the city to rise significantly over the past 20 years. Thus, the development of the city is meanwhile c onsidered as a high priority. Bandar Abbas city does not have a rich capacity for g rowth and development due to its special geographical situation being located in coastal border. Among the limitations placed in the city's development way, natural limit ations (heights and sea shore in the northern and southern parts of the city and struc tural limitations (military centers in the east and west sides of the city may be referred . Therefore, identifying the suitable lands for urban development within Bandar Abbas city l imits is becoming an essential priority. Therefore, d ifferent quantitative and quali tative criteria have been studied in order to select and identify these lands. The struct ures of qualitative criteria for most parts involve ambiguities and vagueness. This leads us to use Fuzzy logic in this study as a natural method for determining the solutions fo r problems of Multi- criteria decision making (MCDM. In the current research, a com bination of MCDM methods has been presented for analysis. To assignee weights of the criteria Fuzzy AHP (analytic hierarchy process is used for land selection and Fuzzy TOPSIS (method for order priority by similarity to ideal solution is utilized to choose the alternative that is the most appropriate through these criteria weights. The

Selection of disposal contractor by multi criteria decision making methods

Directory of Open Access Journals (Sweden)

Cenker Korkmazer

2016-08-01

Full Text Available Hazardous waste is substance that threaten people and environment in case of improper storage, disposal and transport due to its concentration, physical and chemical properties. Companies producing hazardous waste as a result of several activities mostly do not have any own disposal facilities. In addition, they do not pay attention enough to determine the right contractor as a disposal facility. On the other hand, there are various qualitative and quantitative criteria affecting the selection of the contractor and conflicting with each other. The aim of the performed study is to assist one of these companies producing hazardous waste in the selection of the best contractor that eliminates hazardous waste economic and harmless way. In the study, contractor weights in percentage is calculated by using Analytic Network Process (ANP as one of the multi-criteria decision making (MCDM methods and widely used in the literature which considers both qualitative and quantitative criteria. In the next step, by the help of the mathematical model, contractors that will be given which type of hazardous waste are identified. This integrated approach can be used as a guide for similar firms.

Multi-criteria decision making in the selection of machining parameters for Inconel 718

International Nuclear Information System (INIS)

Thirumalai, R.; Senthilkumaar, J. S.

2013-01-01

Taguchi's methods and design of experiments are invariably used and adopted as quality improvement techniques in several manufacturing industries as tools for offline quality control. These methods optimize single-response processes. However, Taguchi's method is not appropriate for optimizing a multi-response problem. In other situations, multi-responses need to be optimized simultaneously. This paper presents multi-response optimization techniques. A set of non-dominated solutions are obtained using non-sorted genetic algorithm for multi-objective functions. Multi-criteria decision making (MCDM) is proposed in this work for selecting a single solution from nondominated solutions. This paper addresses a new method of MCDM concept based on technique for order preference by similarity to ideal solution (TOPSIS). TOPSIS determines the shortest distance to the positive-ideal solution and the greatest distance from the negative-ideal solution. This work involves the high-speed machining of Inconel 718 using carbide cutting tool with six objective functions that are considered as attributes against the process variables of cutting speed, feed, and depth of cut. The higher-ranked solution is selected as the best solution for the machining of Inconel 718 in its respective environment.

Multi-criteria decision making in the selection of machining parameters for Inconel 718

Energy Technology Data Exchange (ETDEWEB)

Thirumalai, R. [SNS College of Technology, Coimbatore (India); Senthilkumaar, J. S. [Bharathithasan Engineering College, Nattrampalli (India)

2013-04-15

Taguchi's methods and design of experiments are invariably used and adopted as quality improvement techniques in several manufacturing industries as tools for offline quality control. These methods optimize single-response processes. However, Taguchi's method is not appropriate for optimizing a multi-response problem. In other situations, multi-responses need to be optimized simultaneously. This paper presents multi-response optimization techniques. A set of non-dominated solutions are obtained using non-sorted genetic algorithm for multi-objective functions. Multi-criteria decision making (MCDM) is proposed in this work for selecting a single solution from nondominated solutions. This paper addresses a new method of MCDM concept based on technique for order preference by similarity to ideal solution (TOPSIS). TOPSIS determines the shortest distance to the positive-ideal solution and the greatest distance from the negative-ideal solution. This work involves the high-speed machining of Inconel 718 using carbide cutting tool with six objective functions that are considered as attributes against the process variables of cutting speed, feed, and depth of cut. The higher-ranked solution is selected as the best solution for the machining of Inconel 718 in its respective environment.

NON-CONVENTIONAL MACHINING PROCESSES SELECTION USING MULTI-OBJECTIVE OPTIMIZATION ON THE BASIS OF RATIO ANALYSIS METHOD

Directory of Open Access Journals (Sweden)

MILOŠ MADIĆ

2015-11-01

Full Text Available The role of non-conventional machining processes (NCMPs in today’s manufacturing environment has been well acknowledged. For effective utilization of the capabilities and advantages of different NCMPs, selection of the most appropriate NCMP for a given machining application requires consideration of different conflicting criteria. The right choice of the NCMP is critical to the success and competitiveness of the company. As the NCMP selection problem involves consideration of different conflicting criteria, of different relative importance, the multi-criteria decision making (MCDM methods are very useful in systematical selection of the most appropriate NCMP. This paper presents the application of a recent MCDM method, i.e., the multi-objective optimization on the basis of ratio analysis (MOORA method to solve NCMP selection which has been defined considering different performance criteria of four most widely used NCMPs. In order to determine the relative significance of considered quality criteria a pair-wise comparison matrix of the analytic hierarchy process was used. The results obtained using the MOORA method showed perfect correlation with those obtained by the technique for order preference by similarity to ideal solution (TOPSIS method which proves the applicability and potentiality of this MCDM method for solving complex NCMP selection problems.

Evaluation and Selection of Best Priority Sequencing Rule in Job Shop Scheduling using Hybrid MCDM Technique

Science.gov (United States)

Kiran Kumar, Kalla; Nagaraju, Dega; Gayathri, S.; Narayanan, S.

2017-05-01

Priority Sequencing Rules provide the guidance for the order in which the jobs are to be processed at a workstation. The application of different priority rules in job shop scheduling gives different order of scheduling. More experimentation needs to be conducted before a final choice is made to know the best priority sequencing rule. Hence, a comprehensive method of selecting the right choice is essential in managerial decision making perspective. This paper considers seven different priority sequencing rules in job shop scheduling. For evaluation and selection of the best priority sequencing rule, a set of eight criteria are considered. The aim of this work is to demonstrate the methodology of evaluating and selecting the best priority sequencing rule by using hybrid multi criteria decision making technique (MCDM), i.e., analytical hierarchy process (AHP) with technique for order preference by similarity to ideal solution (TOPSIS). The criteria weights are calculated by using AHP whereas the relative closeness values of all priority sequencing rules are computed based on TOPSIS with the help of data acquired from the shop floor of a manufacturing firm. Finally, from the findings of this work, the priority sequencing rules are ranked from most important to least important. The comprehensive methodology presented in this paper is very much essential for the management of a workstation to choose the best priority sequencing rule among the available alternatives for processing the jobs with maximum benefit.

Multi-criteria decision making approaches for green supply chains

NARCIS (Netherlands)

Banasik, Aleksander; Bloemhof-Ruwaard, Jacqueline M.; Kanellopoulos, Argyris; Claassen, G.D.H.; Vorst, van der Jack G.A.J.

2016-01-01

Designing Green Supply Chains (GSCs) requires complex decision-support models that can deal with multiple dimensions of sustainability while taking into account specific characteristics of products and their supply chain. Multi-Criteria Decision Making (MCDM) approaches can be used to quantify

Key Determinant Derivations for Information Technology Disaster Recovery Site Selection by the Multi-Criterion Decision Making Method

Directory of Open Access Journals (Sweden)

Chia-Lee Yang

2015-05-01

Full Text Available Disaster recovery sites are an important mechanism in continuous IT system operations. Such mechanisms can sustain IT availability and reduce business losses during natural or human-made disasters. Concerning the cost and risk aspects, the IT disaster-recovery site selection problems are multi-criterion decision making (MCDM problems in nature. For such problems, the decision aspects include the availability of the service, recovery time requirements, service performance, and more. The importance and complexities of IT disaster recovery sites increases with advances in IT and the categories of possible disasters. The modern IT disaster recovery site selection process requires further investigation. However, very few researchers tried to study related issues during past years based on the authors’ extremely limited knowledge. Thus, this paper aims to derive the aspects and criteria for evaluating and selecting a modern IT disaster recovery site. A hybrid MCDM framework consisting of the Decision Making Trial and Evaluation Laboratory (DEMATEL and the Analytic Network Process (ANP will be proposed to construct the complex influence relations between aspects as well as criteria and further, derive weight associated with each aspect and criteria. The criteria with higher weight can be used for evaluating and selecting the most suitable IT disaster recovery sites. In the future, the proposed analytic framework can be used for evaluating and selecting a disaster recovery site for data centers by public institutes or private firms.

Recent developemts in multiple criteria decision making

Directory of Open Access Journals (Sweden)

Z. Zionts

2003-12-01

Full Text Available Problems involving more than one criterion abound. To help in the solution of such problems, a field of management science and operations research known as multiple criteria decision making (MCDM has emerged to help solve such problems. In this paper we discuss some recent developments in this important field.

Prioritization of renewable energy sources for Turkey by using a hybrid MCDM methodology

International Nuclear Information System (INIS)

Kabak, Mehmet; Dağdeviren, Metin

2014-01-01

Highlights: • The paper proposes a hybrid model to prioritize RE sources for Turkey. • The hybrid model based on BOCR and ANP is proposed under linguistic values. • Strategic criteria are economy, security, wellbeing, technology and global effects. • Nineteen criteria are used to evaluate hydro, geothermal, solar, wind and biomass. - Abstract: Developing countries such as Turkey, with their fast growing population and economy, are facing an increasing demand for energy. Turkey does not possess a sufficient quantity of domestic oil and natural gas resources to support this growing demand. On the other hand, the country does have abundant reserves of renewable energy that can be a major component in providing part of the overall energy supply. The country plans to explore its renewable energy (RE) sources and increase the renewable energy share in near future. With this in mind, this paper proposes a hybrid model based on BOCR (Benefits, Opportunities, Costs and Risks) and ANP (Analytic Network Process) to determine Turkey’s energy status and prioritize alternative RE sources. BOCR analysis provides a strategic analysis and detailed overview of the country’s energy issues. ANP is a practical multi criteria decision making (MCDM) method and offers the advantages of decision making models, based on tangible and intangible factors. 19 criteria are used to evaluate five alternative RE sources (Hydro, Geothermal, Solar, Wind and Biomass). The subsequent results show that the most important strategic criterion is economy; other criteria include security, human wellbeing, technology and global effects. Their weights are 0.485, 0.235, 0.130, 0.097 and 0.053, respectively. In the conclusion of this paper, the authors propose hydro power as the optimal RE source for the country

Flood Hazard Mapping by Applying Fuzzy TOPSIS Method

Science.gov (United States)

Han, K. Y.; Lee, J. Y.; Keum, H.; Kim, B. J.; Kim, T. H.

2017-12-01

There are lots of technical methods to integrate various factors for flood hazard mapping. The purpose of this study is to suggest the methodology of integrated flood hazard mapping using MCDM(Multi Criteria Decision Making). MCDM problems involve a set of alternatives that are evaluated on the basis of conflicting and incommensurate criteria. In this study, to apply MCDM to assessing flood risk, maximum flood depth, maximum velocity, and maximum travel time are considered as criterion, and each applied elements are considered as alternatives. The scheme to find the efficient alternative closest to a ideal value is appropriate way to assess flood risk of a lot of element units(alternatives) based on various flood indices. Therefore, TOPSIS which is most commonly used MCDM scheme is adopted to create flood hazard map. The indices for flood hazard mapping(maximum flood depth, maximum velocity, and maximum travel time) have uncertainty concerning simulation results due to various values according to flood scenario and topographical condition. These kind of ambiguity of indices can cause uncertainty of flood hazard map. To consider ambiguity and uncertainty of criterion, fuzzy logic is introduced which is able to handle ambiguous expression. In this paper, we made Flood Hazard Map according to levee breach overflow using the Fuzzy TOPSIS Technique. We confirmed the areas where the highest grade of hazard was recorded through the drawn-up integrated flood hazard map, and then produced flood hazard map can be compared them with those indicated in the existing flood risk maps. Also, we expect that if we can apply the flood hazard map methodology suggested in this paper even to manufacturing the current flood risk maps, we will be able to make a new flood hazard map to even consider the priorities for hazard areas, including more varied and important information than ever before. Keywords : Flood hazard map; levee break analysis; 2D analysis; MCDM; Fuzzy TOPSIS

Prioritization of water management under climate change and urbanization using multi-criteria decision making methods

Directory of Open Access Journals (Sweden)

J.-S. Yang

2012-03-01

Full Text Available This paper quantifies the transformed effectiveness of alternatives for watershed management caused by climate change and urbanization and prioritizes five options using multi-criteria decision making techniques. The climate change scenarios (A1B and A2 were obtained by using a statistical downscaling model (SDSM, and the urbanization scenario by surveying the existing urban planning. The flow and biochemical oxygen demand (BOD concentration duration curves were derived, and the numbers of days required to satisfy the environmental flow requirement and the target BOD concentration were counted using the Hydrological Simulation Program-Fortran (HSPF model. In addition, five feasible alternatives were prioritized by using multi-criteria decision making techniques, based on the driving force-pressure-state-impact-response (DPSIR framework and cost component. Finally, a sensitivity analysis approach for MCDM methods was conducted to reduce the uncertainty of weights. The result indicates that the most sensitive decision criterion is cost, followed by criteria response, driving force, impact, state and pressure in that order. As it is certain that the importance of cost component is over 0.127, construction of a small wastewater treatment plant will be the most preferred alternative in this application.

Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods

International Nuclear Information System (INIS)

Çalışkan, Halil; Kurşuncu, Bilal; Kurbanoğlu, Cahit; Güven, Şevki Yılmaz

2013-01-01

Highlights: ► The material selection problem for tool holders used in hard milling was solved. ► EXPROM2, TOPSIS and VIKOR methods were used for ranking the alternative materials. ► The weighting of criteria was performed by compromised weighting method. ► The best material for the tool holder was selected as Fe–5Cr–Mo–V aircraft steel. -- Abstract: Nowadays machining of materials in their hardened state, also called hard machining, is a challenge in production of tools and molds. It has some advantages such as lower process time and lower manufacturing cost when compared to conventional machining. In machining of hard workpiece materials, however, very high stresses act on the tool holder through the cutting tool. These stresses necessitate the tool holder to have some specific properties. Especially in hard milling, the tool holder should have high stiffness and should be able to dissipate the energy generated during interrupted cutting. Material cost of the tool holder is also important since lower costs provide a competitive advantage for manufacturers. The material selection for the tool holder should be conducted considering aforementioned requirements. To tackle the difficulty of the material selection with specific properties from a large number of alternatives, multi-criteria decision-making (MCDM) methods have been used. In this paper a decision model including extended PROMETHEE II (EXPROM2) (preference ranking organization method for enrichment evaluation), TOPSIS (technique for order performance by similarity to ideal solution) and VIKOR (VIšekriterijumsko KOmpromisno Rangiranje) methods were used for the selection of the best material for the tool holder used in hard milling. The criteria weighting was performed by compromised weighting method composed of AHP (analytic hierarchy process) and Entropy methods. The candidate materials were ranked by using these methods and the results obtained by each method were compared. It was confirmed

Conceptual framework for potential implementations of multicriteria decision making (MCDM) methods for design quality assesment

NARCIS (Netherlands)

Hartpulugil, T.; Prins, M.; Gultekin, A.T.; Topcu, Y.L.

2011-01-01

Architectural design can be considered as a process influenced by many stakeholders, each of which has different decision power. Each stakeholder might have his/her own criteria and weightings depending on his/her own perspective and role. Hence design can be seen as a multi-criteria decision making

Penggunaan Algoritma Multi Criteria Decision Making Dengan Metode Topsis Dalam Penempatan Karyawan

OpenAIRE

Pramudhita, Agung N; Suyono, Hadi; Yudaningtyas, Erni

2015-01-01

The employees are a major asset in the company so that the company can operate properly. In employees pacement, often a mismatch between the positions of the competence of employees. As a result, many employees resigned because of the mismatch. MultiCriteria Decision Making (MCDM) algorithms can be used to overcome these problems. This research builds on a Decision Support System (DSS) to assist managers in the process of employees placement . DSS is built by one of the methods contained in...

Pythagorean fuzzy analytic hierarchy process to multi-criteria decision making

Science.gov (United States)

Mohd, Wan Rosanisah Wan; Abdullah, Lazim

2017-11-01

A numerous approaches have been proposed in the literature to determine the criteria of weight. The weight of criteria is very significant in the process of decision making. One of the outstanding approaches that used to determine weight of criteria is analytic hierarchy process (AHP). This method involves decision makers (DMs) to evaluate the decision to form the pair-wise comparison between criteria and alternatives. In classical AHP, the linguistic variable of pairwise comparison is presented in terms of crisp value. However, this method is not appropriate to present the real situation of the problems because it involved the uncertainty in linguistic judgment. For this reason, AHP has been extended by incorporating the Pythagorean fuzzy sets. In addition, no one has found in the literature proposed how to determine the weight of criteria using AHP under Pythagorean fuzzy sets. In order to solve the MCDM problem, the Pythagorean fuzzy analytic hierarchy process is proposed to determine the criteria weight of the evaluation criteria. Using the linguistic variables, pairwise comparison for evaluation criteria are made to the weights of criteria using Pythagorean fuzzy numbers (PFNs). The proposed method is implemented in the evaluation problem in order to demonstrate its applicability. This study shows that the proposed method provides us with a useful way and a new direction in solving MCDM problems with Pythagorean fuzzy context.

Integrating Fuzzy AHP and Fuzzy ARAS for evaluating financial performance

OpenAIRE

Abdolhamid Safaei Ghadikolaei; Saber Khalili Esbouei

2014-01-01

Multi Criteria Decision Making (MCDM) is an advanced field of Operation Research; recently MCDM methods are efficient and common tools for performance evaluation in many areas such as finance and economy. The aim of this study is to show one of applications of mathematics in real word. This study with considering value based measures and accounting based measures simultaneously, provided a hybrid approach of MCDM methods in fuzzy environment for financial performance evaluation of automotive ...

Development of a chromatographic method with multi-criteria decision making design for simultaneous determination of nifedipine and atenolol in content uniformity testing.

Science.gov (United States)

Ahmed, Sameh; Alqurshi, Abdulmalik; Mohamed, Abdel-Maaboud Ismail

2018-07-01

A new robust and reliable high-performance liquid chromatography (HPLC) method with multi-criteria decision making (MCDM) approach was developed to allow simultaneous quantification of atenolol (ATN) and nifedipine (NFD) in content uniformity testing. Felodipine (FLD) was used as an internal standard (I.S.) in this study. A novel marriage between a new interactive response optimizer and a HPLC method was suggested for multiple response optimizations of target responses. An interactive response optimizer was used as a decision and prediction tool for the optimal settings of target responses, according to specified criteria, based on Derringer's desirability. Four independent variables were considered in this study: Acetonitrile%, buffer pH and concentration along with column temperature. Eight responses were optimized: retention times of ATN, NFD, and FLD, resolutions between ATN/NFD and NFD/FLD, and plate numbers for ATN, NFD, and FLD. Multiple regression analysis was applied in order to scan the influences of the most significant variables for the regression models. The experimental design was set to give minimum retention times, maximum resolution and plate numbers. The interactive response optimizer allowed prediction of optimum conditions according to these criteria with a good composite desirability value of 0.98156. The developed method was validated according to the International Conference on Harmonization (ICH) guidelines with the aid of the experimental design. The developed MCDM-HPLC method showed superior robustness and resolution in short analysis time allowing successful simultaneous content uniformity testing of ATN and NFD in marketed capsules. The current work presents an interactive response optimizer as an efficient platform to optimize, predict responses, and validate HPLC methodology with tolerable design space for assay in quality control laboratories. Copyright © 2018 Elsevier B.V. All rights reserved.

Hesitant Trapezoidal Fuzzy QUALIFLEX Method and Its Application in the Evaluation of Green Supply Chain Initiatives

Directory of Open Access Journals (Sweden)

Xiaolu Zhang

2016-09-01

Full Text Available This paper explores how to handle multiple criteria decision-making (MCDM problems in which the criteria values of alternatives take the form of comparative linguistic expressions. Firstly, the new concept of hesitant trapezoidal fuzzy numbers (HTrFNs is provided to model the semantics of the comparative linguistic expressions. Then, the operational laws and the distance measures of HTrFNs are presented. Afterwards, a useful outranking method, the hesitant trapezoidal fuzzy QUALIFLEX method, is developed to handle the MCDM problems with hierarchical structure in the environment of HTrFN. At length, the proposed method is applied to evaluating green supply chain initiatives in order to achieve sustainable economic and environmental performance, and a case study concerned with a fashion retail chain is presented to demonstrate its feasibility and applicability, also, a comparative analysis with other relevant approaches is conducted to validate the effectiveness of the proposed method.

Improving IT Portfolio Management Decision Confidence Using Multi-Criteria Decision Making and Hypervariate Display Techniques

Science.gov (United States)

Landmesser, John Andrew

2014-01-01

Information technology (IT) investment decision makers are required to process large volumes of complex data. An existing body of knowledge relevant to IT portfolio management (PfM), decision analysis, visual comprehension of large volumes of information, and IT investment decision making suggest Multi-Criteria Decision Making (MCDM) and…

Fuzzy MCDM framework for locating a nuclear power plant in Turkey

International Nuclear Information System (INIS)

Erol, İsmail; Sencer, Safiye; Özmen, Aslı; Searcy, Cory

2014-01-01

Turkey has recently initiated a project to revise its nuclear policy. The revised nuclear energy policy considers searching for possible alternative locations for future nuclear power plants in Turkey. At the most basic level, the public cannot accurately evaluate whether it is willing to support nuclear energy unless it has an idea about where the power plants are likely to be located. It is argued that the selection of a facility location is a multi-criteria decision-making problem including both quantitative and qualitative criteria. In this research, given the multi-criteria nature of the nuclear facility location selection problem, a new decision tool is proposed to rank the alternative nuclear power plant sites in Turkey. The proposed tool is based on fuzzy Entropy and t norm based fuzzy compromise programming to deal with the vagueness of human judgments. Finally, a discussion and some concluding remarks are provided. - Highlights: • Fuzzy MCDM approach is developed to select nuclear power plant location in Turkey. • The proposed framework employs fuzzy entropy and fuzzy compromise programming. • A criterion set was developed using a map by The Turkish Atomic Energy Authority. • Cilingoz is found to be the best with the index values 0.6584 and 0.0838. • The proposed tool can be considered a tool to evaluate the alternative sites

Landfill Site Selection by AHP Based Multi-criteria Decision Making Tool: A Case Study in Kolkata, India

Science.gov (United States)

Majumdar, Ankush; Hazra, Tumpa; Dutta, Amit

2017-09-01

This work presents a Multi-criteria Decision Making (MCDM) tool to select a landfill site from three candidate sites proposed for Kolkata Municipal Corporation (KMC) area that complies with accessibility, receptor, environment, public acceptability, geological and economic criteria. Analytical Hierarchy Process has been used to solve the MCDM problem. Suitability of the three sites (viz. Natagachi, Gangajoara and Kharamba) as landfills as proposed by KMC has been checked by Landfill Site Sensitivity Index (LSSI) as well as Economic Viability Index (EVI). Land area availability for disposing huge quantity of Municipal Solid Waste for the design period has been checked. Analysis of the studied sites show that they are moderately suitable for landfill facility construction as both LSSI and EVI scores lay between 300 and 750. The proposed approach represents an effective MCDM tool for siting sanitary landfill in growing metropolitan cities of developing countries like India.

Conceptual framework for potential implementations of multi criteria decision making (MCDM) methods for design quality assessment

NARCIS (Netherlands)

Harputlugil, T.; Prins, M.; Tanju Gültekin, A.; Ilker Topçu, Y.

2011-01-01

Architectural design can be considered as a process influenced by many stakeholders, each of which has different decision power. Each stakeholder might have his/her own criteria and weightings depending on his/her own perspective and role. Hence design can be seen as a multi-criteria decision making

Multi-Criteria Decision Making for a Spatial Decision Support System on the Analysis of Changing Risk

Science.gov (United States)

Olyazadeh, Roya; van Westen, Cees; Bakker, Wim H.; Aye, Zar Chi; Jaboyedoff, Michel; Derron, Marc-Henri

2014-05-01

this case study namely: construction of defense structures, relocation, implementation of an early warning system and spatial planning regulations. Some of the criteria are determined partly in other modules of the CHANGES SDSS, such as the costs for implementation, the risk reduction in monetary values, and societal risk. Other criteria, which could be environmental, economic, cultural, perception in nature, are defined by different stakeholders such as local authorities, expert organizations, private sector, and local public. In the next step, the stakeholders weight the importance of the criteria by pairwise comparison and visualize the decision matrix, which is a matrix based on criteria versus alternatives values. Finally alternatives are ranked by Analytic Hierarchy Process (AHP) method. We expect that this approach will help the decision makers to ease their works and reduce their costs, because the process is more transparent, more accurate and involves a group decision. In that way there will be more confidence in the overall decision making process. Keywords: MCDM, Analytic Hierarchy Process (AHP), SDSS, Natural Hazard Risk Management

Integrating the Ergonomics Techniques with Multi Criteria Decision Making as a New Approach for Risk Management: An Assessment of Repetitive Tasks -Entropy Case Study.

Science.gov (United States)

Khandan, Mohammad; Nili, Majid; Koohpaei, Alireza; Mosaferchi, Saeedeh

2016-01-01

Nowadays, the health work decision makers need to analyze a huge amount of data and consider many conflicting evaluation criteria and sub-criteria. Therefore, an ergonomic evaluation in the work environment in order to the control occupational disorders is considered as the Multi Criteria Decision Making (MCDM) problem. In this study, the ergonomic risks factors, which may influence health, were evaluated in a manufacturing company in 2014. Then entropy method was applied to prioritize the different risk factors. This study was done with a descriptive-analytical approach and 13 tasks were included from total number of employees who were working in the seven halls of an ark opal manufacturing (240). Required information was gathered by the demographic questionnaire and Assessment of Repetitive Tasks (ART) method for repetitive task assessment. In addition, entropy was used to prioritize the risk factors based on the ergonomic control needs. The total exposure score based on the ART method calculated was equal to 30.07 ±12.43. Data analysis illustrated that 179 cases (74.6% of tasks) were in the high level of risk area and 13.8% were in the medium level of risk. ART- entropy results revealed that based on the weighted factors, higher value belongs to grip factor and the lowest value was related to neck and hand posture and duration. Based on the limited financial resources, it seems that MCDM in many challenging situations such as control procedures and priority approaches could be used successfully. Other MCDM methods for evaluating and prioritizing the ergonomic problems are recommended.

Strategic planning decision making using fuzzy SWOT-TOPSIS with reliability factor

Science.gov (United States)

Mohamad, Daud; Afandi, Nur Syamimi; Kamis, Nor Hanimah

2015-10-01

Strategic planning is a process of decision making and action for long-term activities in an organization. The Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis has been commonly used to help organizations in strategizing their future direction by analyzing internal and external environment. However, SWOT analysis has some limitations as it is unable to prioritize appropriately the multiple alternative strategic decisions. Some efforts have been made to solve this problem by incorporating Multi Criteria Decision Making (MCDM) methods. Nevertheless, another important aspect has raised concerns on obtaining the decision that is the reliability of the information. Decision makers evaluate differently depending on their level of confidence or sureness in the evaluation. This study proposes a decision making procedure for strategic planning using SWOT-TOPSIS method by incorporating the reliability factor of the evaluation based on Z-number. An example using a local authority in the east coast of Malaysia is illustrated to determine the strategic options ranking and to prioritize factors in each SWOT category.

Multi-Gaussian fitting for pulse waveform using Weighted Least Squares and multi-criteria decision making method.

Science.gov (United States)

Wang, Lu; Xu, Lisheng; Feng, Shuting; Meng, Max Q-H; Wang, Kuanquan

2013-11-01

Analysis of pulse waveform is a low cost, non-invasive method for obtaining vital information related to the conditions of the cardiovascular system. In recent years, different Pulse Decomposition Analysis (PDA) methods have been applied to disclose the pathological mechanisms of the pulse waveform. All these methods decompose single-period pulse waveform into a constant number (such as 3, 4 or 5) of individual waves. Furthermore, those methods do not pay much attention to the estimation error of the key points in the pulse waveform. The estimation of human vascular conditions depends on the key points' positions of pulse wave. In this paper, we propose a Multi-Gaussian (MG) model to fit real pulse waveforms using an adaptive number (4 or 5 in our study) of Gaussian waves. The unknown parameters in the MG model are estimated by the Weighted Least Squares (WLS) method and the optimized weight values corresponding to different sampling points are selected by using the Multi-Criteria Decision Making (MCDM) method. Performance of the MG model and the WLS method has been evaluated by fitting 150 real pulse waveforms of five different types. The resulting Normalized Root Mean Square Error (NRMSE) was less than 2.0% and the estimation accuracy for the key points was satisfactory, demonstrating that our proposed method is effective in compressing, synthesizing and analyzing pulse waveforms. Copyright © 2013 Elsevier Ltd. All rights reserved.

A hybrid method for information technology selection combining multi-criteria decision making (MCDM) with technology roadmapping

OpenAIRE

García Mejía, Jaime Andrés

2013-01-01

Abstract: Strategic information technology (IT) management has been recognized as vital for achieving competitive advantage. IT selection, the process of choosing the best technology alternative from a number of available options, is an important part of IT management. The IT selection is a multi-criteria decision making process, where relative importance of each criterion is determined and the degree of satisfaction of every criterion from each alternative is evaluated. Decision makers (DMs)...

An Extended Step-Wise Weight Assessment Ratio Analysis with Symmetric Interval Type-2 Fuzzy Sets for Determining the Subjective Weights of Criteria in Multi-Criteria Decision-Making Problems

Directory of Open Access Journals (Sweden)

Mehdi Keshavarz-Ghorabaee

2018-03-01

Full Text Available Determination of subjective weights, which are based on the opinions and preferences of decision-makers, is one of the most important matters in the process of multi-criteria decision-making (MCDM. Step-wise Weight Assessment Ratio Analysis (SWARA is an efficient method for obtaining the subjective weights of criteria in the MCDM problems. On the other hand, decision-makers may express their opinions with a degree of uncertainty. Using the symmetric interval type-2 fuzzy sets enables us to not only capture the uncertainty of information flexibly but also to perform computations simply. In this paper, we propose an extended SWARA method with symmetric interval type-2 fuzzy sets to determine the weights of criteria based on the opinions of a group of decision-makers. The weights determined by the proposed approach involve the uncertainty of decision-makers’ preferences and the symmetric form of the weights makes them more interpretable. To show the procedure of the proposed approach, it is used to determine the importance of intellectual capital dimensions and components in a company. The results show that the proposed approach is efficient in determining the subjective weights of criteria and capturing the uncertainty of information.

Food chain design using multi criteria decision making, an approach to complex design issues

NARCIS (Netherlands)

Linnemann, A.R.; Hendrix, E.M.T.; Apaiah, R.K.; Boekel, van M.A.J.S.

2015-01-01

Designing a food supply chain for a completely new product involves many stakeholders and knowledge from disciplines in natural and social sciences. This paper describes how Multi Criteria Decision Making (MCDM) facilitated designing a food supply chain in a case of Novel Protein Foods. It made the

Applying decision-making techniques to Civil Engineering Projects

Directory of Open Access Journals (Sweden)

Fam F. Abdel-malak

2017-12-01

Full Text Available Multi-Criteria Decision-Making (MCDM techniques are found to be useful tools in project managers’ hands to overcome decision-making (DM problems in Civil Engineering Projects (CEPs. The main contribution of this paper includes selecting and studying the popular MCDM techniques that uses different and wide ranges of data types in CEPs. A detailed study including advantages and pitfalls of using the Analytic Hierarchy Process (AHP and Fuzzy Technique for Order of Preference by Similarity to Ideal Solution (Fuzzy TOPSIS is introduced. Those two techniques are selected for the purpose of forming a package that covers most available data types in CEPs. The results indicated that AHP has a structure which simplifies complicated problems, while Fuzzy TOPSIS uses the advantages of linguistic variables to solve the issue of undocumented data and ill-defined problems. Furthermore, AHP is a simple technique that depends on pairwise comparisons of factors and natural attributes, beside it is preferable for widely spread hierarchies. On the other hand, Fuzzy TOPSIS needs more information but works well for the one-tier decision tree as well as it shows more flexibility to work in fuzzy environments. The two techniques have the facility to be integrated and combined in a new module to support most of the decisions required in CEPs. Keywords: Decision-making, AHP, Fuzzy TOPSIS, CBA, Civil Engineering Projects

PEMILIHAN DAN MIGRASI VM MENGGUNAKAN MCDM UNTUK PENINGKATAN KINERJA LAYANAN PADA CLOUD COMPUTING

Directory of Open Access Journals (Sweden)

Abdullah Fadil

2016-08-01

Full Text Available Komputasi awan atau cloud computing merupakan lingkungan yang heterogen dan terdistribusi, tersusun atas gugusan jaringan server dengan berbagai kapasitas sumber daya komputasi yang berbeda-beda guna menopang model layanan yang ada di atasnya. Virtual machine (VM dijadikan sebagai representasi dari ketersediaan sumber daya komputasi dinamis yang dapat dialokasikan dan direalokasikan sesuai dengan permintaan. Mekanisme live migration VM di antara server fisik yang terdapat di dalam data center cloud digunakan untuk mencapai konsolidasi dan memaksimalkan utilisasi VM. Pada prosedur konsoidasi vm, pemilihan dan penempatan VM sering kali menggunakan kriteria tunggal dan statis. Dalam penelitian ini diusulkan pemilihan dan penempatan VM menggunakan multi-criteria decision making (MCDM pada prosedur konsolidasi VM dinamis di lingkungan cloud data center guna meningkatkan layanan cloud computing. Pendekatan praktis digunakan dalam mengembangkan lingkungan cloud computing berbasis OpenStack Cloud dengan mengintegrasikan VM selection dan VM Placement pada prosedur konsolidasi VM menggunakan OpenStack-Neat. Hasil penelitian menunjukkan bahwa metode pemilihan dan penempatan VM melalui live migration mampu menggantikan kerugian yang disebabkan oleh down-times sebesar 11,994 detik dari waktu responnya. Peningkatan response times terjadi sebesar 6 ms ketika terjadi proses live migration VM dari host asal ke host tujuan. Response times rata-rata setiap vm yang tersebar pada compute node setelah terjadi proses live migration sebesar 67 ms yang menunjukkan keseimbangan beban pada sistem cloud computing.

An intelligent, knowledge-based multiple criteria decision making advisor for systems design

Science.gov (United States)

Li, Yongchang

In systems engineering, design and operation of systems are two main problems which always attract researcher's attentions. The accomplishment of activities in these problems often requires proper decisions to be made so that the desired goal can be achieved, thus, decision making needs to be carefully fulfilled in the design and operation of systems. Design is a decision making process which permeates through out the design process, and is at the core of all design activities. In modern aircraft design, more and more attention is paid to the conceptual and preliminary design phases so as to increase the odds of choosing a design that will ultimately be successful at the completion of the design process, therefore, decisions made during these early design stages play a critical role in determining the success of a design. Since aerospace systems are complex systems with interacting disciplines and technologies, the Decision Makers (DMs) dealing with such design problems are involved in balancing the multiple, potentially conflicting attributes/criteria, transforming a large amount of customer supplied guidelines into a solidly defined set of requirement definitions. Thus, one could state with confidence that modern aerospace system design is a Multiple Criteria Decision Making (MCDM) process. A variety of existing decision making methods are available to deal with this type of decision problems. The selection of the most appropriate decision making method is of particular importance since inappropriate decision methods are likely causes of misleading engineering design decisions. With no sufficient knowledge about each of the methods, it is usually difficult for the DMs to find an appropriate analytical model capable of solving their problems. In addition, with the complexity of the decision problem and the demand for more capable methods increasing, new decision making methods are emerging with time. These various methods exacerbate the difficulty of the selection

Application of multi-criteria decision making to sustainable energy planning - a review

Energy Technology Data Exchange (ETDEWEB)

Pohekar, S.D.; Ramachandram, M. [Birla Inst. of Technology and Science, Pilani (India)

2004-08-01

Multi-Criteria Decision Making (MCDM) techniques are gaining popularity in sustainable energy management. The techniques provide solutions to the problems involving conflicting and multiple objectives. Several methods based on weighted averages, priority setting, outranking, fuzzy principles and their combinations are employed for energy planning decisions. A review of more than 90 published papers is presented here to analyze the applicability of various methods discussed. A classification on application areas and the year of application is presented to highlight the trends. It is observed that Analytical Hierarchy Process is the most popular technique followed by outranking techniques PROMETHEE and ELECTRE. Validation of results with multiple methods, development of interactive decision support systems and application of fuzzy methods to tackle uncertainties in the data is observed in the published literature. (author)

Operation Performance Evaluation of Power Grid Enterprise Using a Hybrid BWM-TOPSIS Method

Directory of Open Access Journals (Sweden)

Peipei You

2017-12-01

Full Text Available Electricity market reform is in progress in China, and the operational performance of power grid enterprises are vital for its healthy and sustainable development in the current electricity market environment. In this paper, a hybrid multi-criteria decision-making (MCDM framework for operational performance evaluation of a power grid enterprise is proposed from the perspective of sustainability. The latest MCDM method, namely the best-worst method (BWM was employed to determine the weights of all criteria, and the technique for order preference by similarity to an ideal solution (TOPSIS was applied to rank the operation performance of a power grid enterprise. The evaluation index system was built based on the concept of sustainability, which includes three criteria (namely economy, society, and environment and seven sub-criteria. Four power grid enterprises were selected to perform the empirical analysis, and the results indicate that power grid enterprise A1 has the best operation performance. The proposed hybrid BWM-TOPSIS-based framework for operation performance evaluation of a power grid enterprise is effective and practical.

Evaluation of sustainability indicators for decision-making in mining companies

Directory of Open Access Journals (Sweden)

Miletić Slavica

2016-01-01

Full Text Available Evaluation of sustainability indicators in terms of their importance for decision making in mining companies (RTB Bor, RTB can significantly affect the steady economic growth and development of the country. In the paper are ranked sustainability indicators in terms of their importance by illustration of implementation of multicriteria decision making. The essence of the problem is to reduce the subjectivity in the mining companies (RTB Bor who are carriers of the economic development of the country. Evaluation of sustainability indicators of mining companies was carried out using the PROMETHEE methods for multi-criteria decision making. In this method the determination of criteria weights for ranking is done firstly, then the assessment of sustainability indicators and their complete ranking is performed. Based on the obtained results by PROMETHEE method, it is determined the most important sustainability indicators for decision-making, and that is an alternative A1 (economic indicators. The most influential criteria for a complete ranking of sustainability indicators is criteria C1 (increase the utilization of resources and C3 (environmental protection. The obtained result indicates to managers how the implementation of MCDM method should treat the indicators of sustainability during the planning and management process, all with aim to sustain mining companies (RTB Bor.

Reduction in the Number of Comparisons Required to Create Matrix of Expert Judgment in the Comet Method

Directory of Open Access Journals (Sweden)

Sałabun Wojciech

2014-09-01

Full Text Available Multi-criteria decision-making (MCDM methods are associated with the ranking of alternatives based on expert judgments made using a number of criteria. In the MCDM field, the distance-based approach is one popular method for receiving a final ranking. One of the newest MCDM method, which uses the distance-based approach, is the Characteristic Objects Method (COMET. In this method, the preferences of each alternative are obtained on the basis of the distance from the nearest characteristic ob jects and their values. For this purpose, the domain and fuzzy numbers set for all the considered criteria are determined. The characteristic objects are obtained as the combination of the crisp values of all the fuzzy numbers. The preference values of all the characteristic ob ject are determined based on the tournament method and the principle of indifference. Finally, the fuzzy model is constructed and is used to calculate preference values of the alternatives. In this way, a multi-criteria model is created and it is free of rank reversal phenomenon. In this approach, the matrix of expert judgment is necessary to create. For this purpose, an expert has to compare all the characteristic ob jects with each other. The number of necessary comparisons depends squarely to the number of ob jects. This study proposes the improvement of the COMET method by using the transitivity of pairwise comparisons. Three numerical examples are used to illustrate the efficiency of the proposed improvement with respect to results from the original approach. The proposed improvement reduces significantly the number of necessary comparisons to create the matrix of expert judgment.

A Hybrid MCDM Model for New Product Development: Applied on the Taiwanese LiFePO4 Industry

Directory of Open Access Journals (Sweden)

Wen-Chin Chen

2015-01-01

Full Text Available Recent years, since problems with respect to atmosphere pollution hasten countries to accentuate green-related policy regarding the sustainable energy, the lithium-iron phosphate (LiFePO4 battery has been appealed to the world. However, more and more firms invest the LiFePO4 batteries production that has launched a fierce competition. Successful new product development (NPD processes have been considered the key for LiFePO4 battery firms to increase their competitive advantage. Firms must make correct decision faster due to the rapid development of technology and the decreasing product life cycle. This study proposes a hybrid multiple criteria decision making (MCDM model based on the literature review and consultation with the experts, interpretive structural modeling (ISM, and fuzzy analytic network process (FANP for evaluating various strategies for NPD. First of all, reviewing of literature and meeting with the experts are used to screen factors and select the criteria. Then, an ISM is managed to determine the feedback and interdependency of those factors in a network. Finally, a fuzzy theory is applied to resolve the linguistic hedges and an ANP is adopted to obtain the weights of all the factors. A case study is undertaken to validate the model in a Taiwanese company that provides professional packing and design for lithium-iron phosphate battery.

Supplier Selection Using Weighted Utility Additive Method

Science.gov (United States)

Karande, Prasad; Chakraborty, Shankar

2015-10-01

Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

Selection of boron based tribological hard coatings using multi-criteria decision making methods

International Nuclear Information System (INIS)

Çalışkan, Halil

2013-01-01

Highlights: • Boron based coating selection problem for cutting tools was solved. • EXPROM2, TOPSIS and VIKOR methods were used for ranking the alternative materials. • The best coatings for cutting tool were selected as TiBN and TiSiBN. • The ranking results are in good agreement with cutting test results in literature. - Abstract: Mechanical and tribological properties of hard coatings can be enhanced using boron as alloying element. Therefore, multicomponent nanostructured boron based hard coatings are deposited on cutting tools by different methods at different parameters. Different mechanical and tribological properties are obtained after deposition, and it is a difficult task to select the best coating material. In this paper, therefore, a systematic evaluation model was proposed to tackle the difficulty of the material selection with specific properties among a set of available alternatives. The alternatives consist of multicomponent nanostructured TiBN, TiCrBN, TiSiBN and TiAlSiBN coatings deposited by magnetron sputtering and ion implantation assisted magnetron sputtering at different parameters. The alternative coating materials were ranked by using three multi-criteria decision-making (MCDM) methods, i.e. EXPROM2 (preference ranking organization method for enrichment evaluation), TOPSIS (technique for order performance by similarity to ideal solution) and VIKOR (VIšekriterijumsko KOmpromisno Rangiranje), in order to determine the best coating material for cutting tools. Hardness (H), Young’s modulus (E), elastic recovery, friction coefficient, critical load, H/E and H 3 /E 2 ratios were considered as material selection criteria. In order to determine the importance weights of the evaluation criteria, a compromised weighting method, which composes of the analytic hierarchy process and Entropy methods, were used. The ranking results showed that TiBN and TiSiBN coatings deposited at given parameters are the best coatings for cutting tools

Solving the Problem of Multiple-Criteria Building Design Decisions with respect to the Fire Safety of Occupants: An Approach Based on Probabilistic Modelling

Directory of Open Access Journals (Sweden)

Egidijus Rytas Vaidogas

2015-01-01

Full Text Available The design of buildings may include a comparison of alternative architectural and structural solutions. They can be developed at different levels of design process. The alternative design solutions are compared and ranked by applying methods of multiple-criteria decision-making (MCDM. Each design is characterised by a number of criteria used in a MCDM problem. The paper discusses how to choose MCDM criteria expressing fire safety related to alternative designs. Probability of a successful evacuation of occupants from a building fire and difference between evacuation time and time to untenable conditions are suggested as the most important criteria related to fire safety. These two criteria are treated as uncertain quantities expressed by probability distributions. Monte Carlo simulation of fire and evacuation processes is natural means for an estimation of these distributions. The presence of uncertain criteria requires applying stochastic MCDM methods for ranking alternative designs. An application of the safety-related criteria is illustrated by an example which analyses three alternative architectural floor plans prepared for a reconstruction of a medical building. A MCDM method based on stochastic simulation is used to solve the example problem.

Considering Interactions among Multiple Criteria for the Server Selection

Directory of Open Access Journals (Sweden)

Vesna Čančer

2010-06-01

Full Text Available Decision-making about server selection is one of the multi-criteria decision-making (MCDM processes where interactions among criteria should be considered. The paper introduces and develops some solutions for considering interactions among criteria in the MCDM problems. In the frame procedure for MCDM by using the group of methods, based on assigning weights, special attention is given to the synthesis of the local alternatives’ values into the aggregate values where the mutual preferential independence between two criteria is not assumed. Firstly, we delineate how to complete the additive model into the multiplicative one with synergic and redundancy elements in the case that criteria are structured in one level and in two levels. Furthermore, we adapted the concept of the fuzzy Choquet integral to the multi-attribute value theory. Studying and comparing the results of the example case of the server selection obtained by both aggregation approaches, the paper highlights the advantages of the first one since it does not require from decision makers to determine the weights of all possible combinations of the criteria and it enables the further use of the most preferred MCDM methods.

Multi-criteria decision making with linguistic labels: a comparison of two methodologies applied to energy planning

OpenAIRE

Afsordegan, Arayeh; Sánchez Soler, Monica; Agell Jané, Núria; Cremades Oliver, Lázaro Vicente; Zahedi, Siamak

2014-01-01

This paper compares two multi-criteria decision making (MCDM) approaches based on linguistic label assessment. The first approach consists of a modified fuzzy TOPSIS methodology introduced by Kaya and Kahraman in 2011. The second approach, introduced by Agell et al. in 2012, is based on qualitative reasoning techniques for ranking multi-attribute alternatives in group decision-making with linguistic labels. Both approaches are applied to a case of assessment and selection of the most suita...

A review of multi-criteria decision making techniques for supplier evaluation and selection

Directory of Open Access Journals (Sweden)

Prince Agarwal

2011-10-01

Full Text Available Supplier evaluation and selection has been a vital issue of strategic importance for long time. Different multi-criteria decision making (MCDM approaches have been proposed by the researchers in past, to solve the supplier evaluation and selection problem. In this paper, we present a review of various MCDM methodologies reported in the literature for solving the supplier evaluation and selection process. The review is solely based on sixty-eight research articles, including eight review articles in the academic literature from 2000 to 2011. We try to find out the most prevalent approach in the articles and thereby present the future scope of arriving at an optimal solution to the problem, based on the specifications, the strategies and the requirements of the buyers. The study presents that with the change in processes and the requirements, how the approach of the manufacturing industry has shifted from striving for operational effectiveness to the strategic partnership in the dyadic relationship.

Multiple criteria decision making with life cycle assessment for material selection of composites

Directory of Open Access Journals (Sweden)

A. S. Milani

2011-12-01

Full Text Available With the advancement of interdisciplinary approaches in today’s modern engineering, current efforts in optimal design of composites include seeking material selection protocols that can (1 simultaneously consider a series of mechanical/electrical/chemical cost criteria over a set of alternative material options, and (2 closely take into account environmental aspects of final products including recycling and end-of-life disposal options. In this paper, in addition to a review of some recent experimental and methodological advances in the above areas, a new application of multiple criteria decision making (MCDM is presented to deal with decision conflicts often seen among design criteria in composite material selection with the help of life cycle assessment (LCA. To show the application, an illustrative case study on a plastic gear material selection is conducted where the cost, mechanical and thermal properties along with environmental impact criteria are to be satisfied simultaneously. A pure plastic gear is compared to a Polyethylene terephthalate (PET/aluminum-powder composite alternative. Results suggest that simple MCDM models, including a signal-to-noise measure adapted to MCDM in the same case study, can be used to explore both trade-offs and design break-even points in large decision spaces as the decision maker’s perspective over environmental, material performance and cost attributes change during the design process. More advanced topics including the account of material data uncertainties are addressed.

Assessment of hydrogen fuel cell applications using fuzzy multiple-criteria decision making method

International Nuclear Information System (INIS)

Chang, Pao-Long; Hsu, Chiung-Wen; Lin, Chiu-Yue

2012-01-01

Highlights: ► This study uses the fuzzy MCDM method to assess hydrogen fuel cell applications. ► We evaluate seven different hydrogen fuel cell applications based on 14 criteria. ► Results show that fuel cell backup power systems should be chosen for development in Taiwan. -- Abstract: Assessment is an essential process in framing government policy. It is critical to select the appropriate targets to meet the needs of national development. This study aimed to develop an assessment model for evaluating hydrogen fuel cell applications and thus provide a screening tool for decision makers. This model operates by selecting evaluation criteria, determining criteria weights, and assessing the performance of hydrogen fuel cell applications for each criterion. The fuzzy multiple-criteria decision making method was used to select the criteria and the preferred hydrogen fuel cell products based on information collected from a group of experts. Survey questionnaires were distributed to collect opinions from experts in different fields. After the survey, the criteria weights and a ranking of alternatives were obtained. The study first defined the evaluation criteria in terms of the stakeholders, so that comprehensive influence criteria could be identified. These criteria were then classified as environmental, technological, economic, or social to indicate the purpose of each criterion in the assessment process. The selected criteria included 14 indicators, such as energy efficiency and CO 2 emissions, as well as seven hydrogen fuel cell applications, such as forklifts and backup power systems. The results show that fuel cell backup power systems rank the highest, followed by household fuel cell electric-heat composite systems. The model provides a screening tool for decision makers to select hydrogen-related applications.

Implementation of multi-criteria decision making approach for the team leader selection in IT sector

Directory of Open Access Journals (Sweden)

Sandhya

2016-12-01

Full Text Available In the era of technology, the demand of the software development increases at a very high speed, as software has touched the human’s life in all aspects. The better quality software development acquiring minimum development time leads to the team work in which a group of people has been formed that work together in a team for the software development. One of the most signifi-cant issues in effective and efficient teamwork is the team leader selection because the team lead-er is the person in any team that is going to handle all types of managerial activities such as lead-ership, motivation to others, etc. The team leader selection process may be dependent on numer-ous conflicting selection indexes that make it a Multi-Criteria Decision Making (MCDM prob-lem. In the present research, an MCDM approach namely, Euclidean Distance Based Approxi-mation (EDBA which is based on the calculation of the composite distance value for each alter-native from a hypothetical optimal point is presented. The result of this study provides a compre-hensive ranking of team leaders that leads to the right selection of team leader in information technology (IT sector.

Application of multi-criteria decision-making on strategic municipal solid waste management in Dalmatia, Croatia

International Nuclear Information System (INIS)

Vego, Goran; Kucar-Dragicevic, Savka; Koprivanac, Natalija

2008-01-01

The efficiency of providing a waste management system in the coastal part of Croatia consisting of four Dalmatian counties has been modelled. Two multi-criteria decision-making (MCDM) methods, PROMETHEE and GAIA, were applied to assist with the systematic analysis and evaluation of the alternatives. The analysis covered two levels; first, the potential number of waste management centres resulting from possible inter-county cooperation; and second, the relative merits of siting of waste management centres in the coastal or hinterland zone was evaluated. The problem was analysed according to several criteria; and ecological, economic, social and functional criteria sets were identified as relevant to the decision-making process. The PROMETHEE and GAIA methods were shown to be efficient tools for analysing the problem considered. Such an approach provided new insights to waste management planning at the strategic level, and gave a reason for rethinking some of the existing strategic waste management documents in Croatia

Application of multi-criteria decision-making on strategic municipal solid waste management in Dalmatia, Croatia.

Science.gov (United States)

Vego, Goran; Kucar-Dragicević, Savka; Koprivanac, Natalija

2008-11-01

The efficiency of providing a waste management system in the coastal part of Croatia consisting of four Dalmatian counties has been modelled. Two multi-criteria decision-making (MCDM) methods, PROMETHEE and GAIA, were applied to assist with the systematic analysis and evaluation of the alternatives. The analysis covered two levels; first, the potential number of waste management centres resulting from possible inter-county cooperation; and second, the relative merits of siting of waste management centres in the coastal or hinterland zone was evaluated. The problem was analysed according to several criteria; and ecological, economic, social and functional criteria sets were identified as relevant to the decision-making process. The PROMETHEE and GAIA methods were shown to be efficient tools for analysing the problem considered. Such an approach provided new insights to waste management planning at the strategic level, and gave a reason for rethinking some of the existing strategic waste management documents in Croatia.

Near-Earth object hazardous impact: A Multi-Criteria Decision Making approach.

Science.gov (United States)

Sánchez-Lozano, J M; Fernández-Martínez, M

2016-11-16

The impact of a near-Earth object (NEO) may release large amounts of energy and cause serious damage. Several NEO hazard studies conducted over the past few years provide forecasts, impact probabilities and assessment ratings, such as the Torino and Palermo scales. These high-risk NEO assessments involve several criteria, including impact energy, mass, and absolute magnitude. The main objective of this paper is to provide the first Multi-Criteria Decision Making (MCDM) approach to classify hazardous NEOs. Our approach applies a combination of two methods from a widely utilized decision making theory. Specifically, the Analytic Hierarchy Process (AHP) methodology is employed to determine the criteria weights, which influence the decision making, and the Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) is used to obtain a ranking of alternatives (potentially hazardous NEOs). In addition, NEO datasets provided by the NASA Near-Earth Object Program are utilized. This approach allows the classification of NEOs by descending order of their TOPSIS ratio, a single quantity that contains all of the relevant information for each object.

Correlation Coefficients of Probabilistic Hesitant Fuzzy Elements and Their Applications to Evaluation of the Alternatives

Directory of Open Access Journals (Sweden)

Zhong-xing Wang

2017-11-01

Full Text Available Correlation coefficient is one of the broadly use indexes in multi-criteria decision-making (MCDM processes. However, some important issues related to correlation coefficient utilization within probabilistic hesitant fuzzy environments remain to be addressed. The purpose of this study is introduced a MCDM method based on correlation coefficients utilize probabilistic hesitant fuzzy information. First, the covariance and correlation coefficient between two PHFEs is introduced, the properties of the proposed covariance and correlation coefficient are discussed. In addition, the northwest corner rule to obtain the expected mean related to the multiply of two PHFEs is introduced. Second, the weighted correlation coefficient is proposed to make the proposed MCDM method more applicable. And the properties of the proposed weighted correlation coefficient are also discussed. Finally, an illustrative example is demonstrated the practicality and effectiveness of the proposed method. An illustrative example is presented to demonstrate the correlation coefficient propose in this paper lies in the interval [−1, 1], which not only consider the strength of relationship between the PHFEs but also whether the PHFEs are positively or negatively related. The advantage of this method is it can avoid the inconsistency of the decision-making result due to the loss of information.

Integrating Fuzzy AHP and Fuzzy ARAS for evaluating financial performance

Directory of Open Access Journals (Sweden)

Abdolhamid Safaei Ghadikolaei

2014-09-01

Full Text Available Multi Criteria Decision Making (MCDM is an advanced field of Operation Research; recently MCDM methods are efficient and common tools for performance evaluation in many areas such as finance and economy. The aim of this study is to show one of applications of mathematics in real word. This study with considering value based measures and accounting based measures simultaneously, provided a hybrid approach of MCDM methods in fuzzy environment for financial performance evaluation of automotive and parts manufacturing industry of Tehran stock exchange (TSE.for this purpose Fuzzy analytic hierarchy process (FAHP is applied to determine the relative important of each criterion, then The companies are ranked according their financial performance by using fuzzy additive ratio assessment (Fuzzy ARAS method. The finding of this study showed effective of this approach in evaluating financial performance.

A Novel Approach to Site Selection: Collaborative Multi-Criteria Decision Making through Geo-Social Network (Case Study: Public Parking

Directory of Open Access Journals (Sweden)

Zeinab Neisani Samani

2018-03-01

Full Text Available There are many potential factors that are involved in the decision making process of site selection, which makes it a challenging issue. This paper addresses the collaborative decision making concept through a geo-social network to predict site selection for public parking in Tehran, Iran. The presented approach utilized the analytic hierarchy process (AHP as a multi-criteria decision method (MCDM for weighting the criteria, which was completed in two stages; once by 50 experts, and then by three different levels of users, including 50 experts, 25 urban managers, and 150 pubic citizens, with respect to the case study area. The fuzzy majority method aggregates the archived results of AHP to determine the preferred locations that are suitable for public parking. The proposed method was implemented using a telegram bot platform. Two main advantages of the collaborative decision making scenario for public urban site selection are the fair distribution of the selected locations and the high satisfaction of users, which increased from 65% to 85%. This study presents an application for site selection based on multi-criteria decision making in a geo-social network context.

Continuous multi-criteria methods for crop and soil conservation planning on La Colacha (Río Cuarto, Province of Córdoba, Argentina

Directory of Open Access Journals (Sweden)

J. M. Antón

2012-08-01

Full Text Available Agro-areas of Arroyos Menores (La Colacha west and south of Río Cuarto (Prov. of Córdoba, Argentina basins are very fertile but have high soil loses. Extreme rain events, inundations and other severe erosions forming gullies demand urgently actions in this area to avoid soil degradation and erosion supporting good levels of agro production. The authors first improved hydrologic data on La Colacha, evaluated the systems of soil uses and actions that could be recommended considering the relevant aspects of the study area and applied decision support systems (DSS with mathematic tools for planning of defences and uses of soils in these areas. These were conducted here using multi-criteria models, in multi-criteria decision making (MCDM; first of discrete MCDM to chose among global types of use of soils, and then of continuous MCDM to evaluate and optimize combined actions, including repartition of soil use and the necessary levels of works for soil conservation and for hydraulic management to conserve against erosion these basins. Relatively global solutions for La Colacha area have been defined and were optimised by Linear Programming in Goal Programming forms that are presented as Weighted or Lexicographic Goal Programming and as Compromise Programming. The decision methods used are described, indicating algorithms used, and examples for some representative scenarios on La Colacha area are given.

Comparison of Multi-Criteria Decision Support Methods (AHP, TOPSIS, SAW & PROMENTHEE) for Employee Placement

Science.gov (United States)

Widianta, M. M. D.; Rizaldi, T.; Setyohadi, D. P. S.; Riskiawan, H. Y.

2018-01-01

The right decision in placing employees in an appropriate position in a company will support the quality of management and will have an impact on improving the quality of human resources of the company. Such decision-making can be assisted by an approach through the Decision Support System (DSS) to improve accuracy in the employee placement process. The purpose of this paper is to compare the four methods of Multi Criteria Decision Making (MCDM), ie Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), Simple Additive Weighting (SAW), Analytic Hierarchy Process (AHP) and Preference Ranking Organization Method for Enrichment Of Evaluations (PROMETHEE) for the application of employee placement in accordance with predetermined criteria. The ranking results and the accuracy level obtained from each method are different depending on the different scaling and weighting processes in each method.

An Integrated MCDM Model for Conveyor Equipment Evaluation and Selection in an FMC Based on a Fuzzy AHP and Fuzzy ARAS in the Presence of Vagueness

Science.gov (United States)

Nguyen, Huu-Tho; Md Dawal, Siti Zawiah; Nukman, Yusoff; P. Rifai, Achmad; Aoyama, Hideki

2016-01-01

The conveyor system plays a vital role in improving the performance of flexible manufacturing cells (FMCs). The conveyor selection problem involves the evaluation of a set of potential alternatives based on qualitative and quantitative criteria. This paper presents an integrated multi-criteria decision making (MCDM) model of a fuzzy AHP (analytic hierarchy process) and fuzzy ARAS (additive ratio assessment) for conveyor evaluation and selection. In this model, linguistic terms represented as triangular fuzzy numbers are used to quantify experts’ uncertain assessments of alternatives with respect to the criteria. The fuzzy set is then integrated into the AHP to determine the weights of the criteria. Finally, a fuzzy ARAS is used to calculate the weights of the alternatives. To demonstrate the effectiveness of the proposed model, a case study is performed of a practical example, and the results obtained demonstrate practical potential for the implementation of FMCs. PMID:27070543

A Data Pre-Processing Model for the Topsis Method

Directory of Open Access Journals (Sweden)

Kobryń Andrzej

2016-12-01

Full Text Available TOPSIS is one of the most popular methods of multi-criteria decision making (MCDM. Its fundamental role is the establishment of chosen alternatives ranking based on their distance from the ideal and negative-ideal solution. There are three primary versions of the TOPSIS method distinguished: classical, interval and fuzzy, where calculation algorithms are adjusted to the character of input rating decision-making alternatives (real numbers, interval data or fuzzy numbers. Various, specialist publications present descriptions on the use of particular versions of the TOPSIS method in the decision-making process, particularly popular is the fuzzy version. However, it should be noticed, that depending on the character of accepted criteria – rating of alternatives can have a heterogeneous character. The present paper suggests the means of proceeding in the situation when the set of criteria covers characteristic criteria for each of the mentioned versions of TOPSIS, as a result of which the rating of the alternatives is vague. The calculation procedure has been illustrated by an adequate numerical example.

Are Multi-criteria Decision Making Techniques Useful for Solving Corporate Finance Problems? A Bibliometric Analysis || ¿Son adecuadas las técnicas de decisión multicriterio para resolver los problemas financieros corporativos? Un análisis bibliométrico

Directory of Open Access Journals (Sweden)

Guerrero-Baena, M. Dolores

2014-06-01

Full Text Available Corporate financial decision making processes (selection of investments and funding sources are becoming increasingly complex because of the growing number of conflicting criteria that need to be considered. The main aim of this paper is to perform a bibliometric analysis of the international research on the application of multi-criteria decision making (MCDM techniques to corporate finance issues during the period 1980-2012. A total of 347 publications from the Scopus database have been compiled, classified and analysed. The results obtained confirm: a an increase in the importance of MCDM in corporate finance; b the relevance of MCDM techniques in capital budgeting processes (fixed assets investment and in the assessment of firms' economic and financial performance; c the techniques based on the multiple attribute utility theory (MAUT are the most popular in complex decision making situations as they are very simple to implement. || Los procesos de decisión de selección de inversiones y de las fuentes de financiación de las empresas se caracterizan por una creciente complejidad, dada la confluencia del cada vez mayor número de criterios a considerar. El objetivo de este trabajo es realizar un análisis bibliométrico de la producción científica internacional que ha abordado la problemática asociada a las finanzas corporativas mediante la implementación del paradigma de Decisión Multicriterio (MCDM durante el periodo 1980-2012. Un total de 347 publicaciones han sido recopiladas de la base de datos de Scopus, clasificadas y analizadas. De los resultados obtenidos cabe destacar lo siguiente: a se ha producido un considerable incremento del uso de las técnicas multicriterio en finanzas corporativas; b las técnicas MCDM se han empleado fundamentalmente en la selección de inversiones productivas, evidenciándose igualmente su utilidad para la evaluación de la situación económico-financiera de las empresas; c las técnicas basadas en

A case study to optimum selection of deliquification method for gas condensate well design: South Pars gas field

Directory of Open Access Journals (Sweden)

Ehsan Khamehchi

2016-06-01

Today, the most effective liquid-removal devices are pumping, the combination of liquid-diverter with gas lift and velocity string. Considering mentioned complexities, the most efficient method of liquid removal is different from one well to the others. This paper discusses a multi-criteria decision making (MCDM strategy for ranking these methods based on ELECTRE and TOPSIS techniques in a gas condensate reservoir. The most efficient model in this case, regarding its high efficiency and level of reliability is continuous gas lift. These procedures can be extended to other cases easily by changing the comparison matrix and user defined weights.

PROMETHEE II: A knowledge-driven method for copper exploration

Science.gov (United States)

Abedi, Maysam; Ali Torabi, S.; Norouzi, Gholam-Hossain; Hamzeh, Mohammad; Elyasi, Gholam-Reza

2012-09-01

This paper describes the application of a well-known Multi Criteria Decision Making (MCDM) technique called Preference Ranking Organization METHod for Enrichment Evaluation (PROMETHEE II) to explore porphyry copper deposits. Various raster-based evidential layers involving geological, geophysical, and geochemical geo-datasets are integrated to prepare a mineral prospectivity mapping (MPM). In a case study, thirteen layers of the Now Chun copper deposit located in the Kerman province of Iran are used to explore the region of interest. The PROMETHEE II technique is applied to produce the desired MPM, and the outputs are validated using twenty-one boreholes that have been classified into five classes. This proposed method shows a high performance when providing the MPM while reducing the cost of exploratory drilling in the study area.

An Integrated Multi-Criteria Decision Making Model and AHP Weighting Uncertainty Analysis for Sustainability Assessment of Coal-Fired Power Units

Directory of Open Access Journals (Sweden)

Dianfa Wu

2018-05-01

Full Text Available The transformation of the power generation industry from coal-based to more sustainable energy sources is an irreversible trend. In China, the coal-fired power plant, as the main electric power supply facility at present, needs to know its own sustainability level to face the future competition. A hybrid multi-criteria decision making (MCDM model is proposed in this paper to assess the sustainability levels of the existing Chinese coal-fired power units. The areal grey relational analysis (AGRA method is involved in the hybrid model, and a combined weighting method is used to determine the priorities of the criteria. The combining weight fuses the fuzzy rough set (FRS and entropy objective weighting method together with the analytic hierarchy process (AHP subjective weighting method by game theory. Moreover, an AHP weighting uncertainty analysis using Monte Carlo (MC simulation is introduced to measure the uncertainty of the results, and a 95 percent confidence interval (CI is defined as the uncertainty measurement of the alternatives. A case study about eight coal-fired power units is carried out with a criteria system, which contains five aspects in an operational perspective, such as the flexibility, economic, environmental, reliability and technical criterion. The sustainability assessment is performed at the unit level, and the results give a priority rank of the eight alternatives; additionally, the uncertainty analysis supplies the extra information from a statistical perspective. This work expands a novel hybrid MCDM method to the sustainability assessment of the power generation systems, and it may be a benefit to the energy enterprises in assessing the sustainability at the unit level and enhance its ability in future sustainable development.

Measuring efficiency of university-industry Ph.D. projects using best worst method.

Science.gov (United States)

Salimi, Negin; Rezaei, Jafar

A collaborative Ph.D. project, carried out by a doctoral candidate, is a type of collaboration between university and industry. Due to the importance of such projects, researchers have considered different ways to evaluate the success, with a focus on the outputs of these projects. However, what has been neglected is the other side of the coin-the inputs. The main aim of this study is to incorporate both the inputs and outputs of these projects into a more meaningful measure called efficiency. A ratio of the weighted sum of outputs over the weighted sum of inputs identifies the efficiency of a Ph.D. The weights of the inputs and outputs can be identified using a multi-criteria decision-making (MCDM) method. Data on inputs and outputs are collected from 51 Ph.D. candidates who graduated from Eindhoven University of Technology. The weights are identified using a new MCDM method called Best Worst Method (BWM). Because there may be differences in the opinion of Ph.D. candidates and supervisors on weighing the inputs and outputs, data for BWM are collected from both groups. It is interesting to see that there are differences in the level of efficiency from the two perspectives, because of the weight differences. Moreover, a comparison between the efficiency scores of these projects and their success scores reveals differences that may have significant implications. A sensitivity analysis divulges the most contributing inputs and outputs.

GIS-based Multi-criteria land suitability analysis for sustainable ...

Indian Academy of Sciences (India)

43

of Tadla plain (Morocco) using geographic information system (GIS) and analytical ... clean water and air, reducing greenhouse gas emissions, preserving natural ... criteria decision making (MCDM) methods allowed having information from ...

Analysis of Steel Wire Rope Diagnostic Data Applying Multi-Criteria Methods

Directory of Open Access Journals (Sweden)

Audrius Čereška

2018-02-01

Full Text Available Steel ropes are complex flexible structures used in many technical applications, such as elevators, cable cars, and funicular cabs. Due to the specific design and critical safety requirements, diagnostics of ropes remains an important issue. Broken wire number in the steel ropes is limited by safety standards when they are used in the human lifting and carrying installations. There are some practical issues on loose wires—firstly, it shows end of lifetime of the entire rope, independently of wear, lubrication or wrong winding on the drums or through pulleys; and, secondly, it can stick in the tight pulley—support gaps and cause deterioration of rope structure up to birdcage formations. Normal rope operation should not generate broken wires, so increasing of their number shows a need for rope installation maintenance. This paper presents a methodology of steel rope diagnostics and the results of analysis using multi-criteria analysis methods. The experimental part of the research was performed using an original test bench to detect broken wires on the rope surface by its vibrations. Diagnostics was performed in the range of frequencies from 60 to 560 Hz with a pitch of 50 Hz. The obtained amplitudes of the broken rope wire vibrations, different from the entire rope surface vibration parameters, was the significant outcome. Later analysis of the obtained experimental results revealed the most significant values of the diagnostic parameters. The evaluation of the power of the diagnostics was implemented by using multi-criteria decision-making (MCDM methods. Various decision-making methods are necessary due to unknown efficiencies with respect to the physical phenomena of the evaluated processes. The significance of the methods was evaluated using objective methods from the structure of the presented data. Some of these methods were proposed by authors of this paper. Implementation of MCDM in diagnostic data analysis and definition of the

Reply to the comment by B. Ghobadipour and B. Mojarradi "M. Abedi, S.A. Torabi, G.-H. Norouzi and M. Hamzeh; ELECTRE III: A knowledge-driven method for integration of geophysical data with geological and geochemical data in mineral prospectivity mapping"

Science.gov (United States)

Abedi, Maysam

2015-06-01

This reply discusses the results of two previously developed approaches in mineral prospectivity/potential mapping (MPM), i.e., ELECTRE III and PROMETHEE II as well-known methods in multi-criteria decision-making (MCDM) problems. Various geo-data sets are integrated to prepare MPM in which generated maps have acceptable matching with the drilled boreholes. Equal performance of the applied methods is indicated in the studied case. Complementary information of these methods is also provided in order to help interested readers to implement them in MPM process.

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

In the present study, groundwater potential zone are delineated using remote sensing, geographical information system (GIS) and multi-criteria decision making (MCDM) techniques in Unnao district, Uttar Pradesh. The analytical network process (ANP) is a method that makes it possible for one to deal systematically, and ...

Multicriteria Personnel Selection by the Modified Fuzzy VIKOR Method

Directory of Open Access Journals (Sweden)

Rasim M. Alguliyev

2015-01-01

Full Text Available Personnel evaluation is an important process in human resource management. The multicriteria nature and the presence of both qualitative and quantitative factors make it considerably more complex. In this study, a fuzzy hybrid multicriteria decision-making (MCDM model is proposed to personnel evaluation. This model solves personnel evaluation problem in a fuzzy environment where both criteria and weights could be fuzzy sets. The triangular fuzzy numbers are used to evaluate the suitability of personnel and the approximate reasoning of linguistic values. For evaluation, we have selected five information culture criteria. The weights of the criteria were calculated using worst-case method. After that, modified fuzzy VIKOR is proposed to rank the alternatives. The outcome of this research is ranking and selecting best alternative with the help of fuzzy VIKOR and modified fuzzy VIKOR techniques. A comparative analysis of results by fuzzy VIKOR and modified fuzzy VIKOR methods is presented. Experiments showed that the proposed modified fuzzy VIKOR method has some advantages over fuzzy VIKOR method. Firstly, from a computational complexity point of view, the presented model is effective. Secondly, compared to fuzzy VIKOR method, it has high acceptable advantage compared to fuzzy VIKOR method.

A fuzzy AHP approach for employee recruitment

Directory of Open Access Journals (Sweden)

Mohsen Varmazyar

2014-01-01

Full Text Available Human resource management plays an essential role on development of any business organization. Selection of employee normally depends on various criteria such as employee commitment, necessary skills, etc. Therefore, a good strategy to hire appropriate employee is a multi-criteria decision making (MCDM specially the ones, which could handle uncertainty, properly. In this paper, we present a method to use MCDM techniques for hiring employees. In fact, the present work proposes a Fuzzy Analytic Hierarchy Process (FAHP as one of the most popular multi-criteria decision making techniques. A computer application is developed where it receives the configuration of the employee selection problem, evaluates the candidates and ranks them using the appropriate voting system.

Multi-criteria decision making with overlapping criteria

Directory of Open Access Journals (Sweden)

Mohammed Shahid Abdulla

2012-09-01

Full Text Available The evidential reasoning (ER algorithm for multi-criteria decision making (MCDM performs aggregation of the assessments of multiple experts, one each for every attribute (or subsystem or criterion of a given system. Two variants of ER are proposed, that handle a scenario where more than one expert assesses an attribute. The first algorithm handles the case of multiple experts who assess an attribute of a larger system. Experiments compare a modification of ER for this scenario which results in poorer detection. The second algorithm is used when experts have overlapping areas of expertise among the subsystems. A comparison is made with a variant of ER in the literature. Both algorithms are examples of novel ‘exclusive’ and ‘inclusive’ ER.

Multiple criteria decision making for sustainable energy and transportation systems. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ehrgott, Matthias [Auckland Univ. (New Zealand). Dept. of Engineering Science; Naujoks, Boris [Login GmbH, Schwelm (Germany).; Stewart, Theodor J. [Cape Town Univ., Rondebosch (South Africa). Dept. of Statistical Sciences; Wallenius, Jyrki (eds.) [Helsinki School of Economics (Finland). Dept. of Business Technology

2010-07-01

In the twenty-first century the sustainability of energy and transportation systems is on the top of the political agenda in many countries around the world and governments are establishing policies towards a sustainable, low emissions energy future. Environmental impacts of human economic activity necessitate the consideration of conflicting goals in decision making processes to develop sustainable systems. Any sustainable development has to reconcile conflicting economic and environmental objectives and criteria. The science of multiple criteria decision making has a lot to offer in addressing this need. Decision making with multiple (conflicting) criteria is the topic of research that is at the heart of the International Society of Multiple Criteria Decision Making. This book is based on selected papers presented at the societies 19th International Conference, held at The University of Auckland, New Zealand, from 7th to 12th January 2008 under the theme ''MCDM for Sustainable Energy and Transportation Systems''. (orig.)

Proposing a model for safety risk assessment in the construction industry using gray multi-criterion decision-making

Directory of Open Access Journals (Sweden)

S. M. Abootorabi

2014-09-01

Full Text Available Introduction: Statistical Report of the Social Security Organization indicate that among the various industries, the construction industry has the highest number of work-related accidents so that in addition to frequency, it has high intensity, as well. On the other hand, a large number of human resources are working in this whish shows they necessity for paying special attention to these workers. Therefore, risk assessment of the safety in the construction industry is an effective step in this regard. In this study, a method for ranking safety risks in conditions of low number of samples and uncertainty is presented, using gray multi-criterion decision-making. .Material and Method: In this study, we first identified the factors affecting the occurrence of hazards in the construction industry. Then, appropriate for ranking the risks were determined and the problem was defined as a multi-criterion decision-making. In order to weight the criteria and to evaluate alternatives based on each criterion, gray numbers were used. In the last stage, the problem was solved using the gray possibility degree. .Results: The results show that the method of gray multi-criterion decision-making is an effective method for ranking risks in situations of low samples compared with other methods of MCDM. .Conclusion: The proposed method is preferred to fuzzy methods and statistics in uncertain and low sample size, due to simple calculations and no need to define the membership function.

Multi-criteria appraisal of multi-modal urban public transport systems

NARCIS (Netherlands)

Keyvan Ekbatani, M.; Cats, O.

2015-01-01

This study proposes a multi-criteria decision making (MCDM) modelling framework for the appraisal of multi-modal urban public transportation services. MCDM is commonly used to obtain choice alternatives that satisfy a range of performance indicators. The framework embraces both compensatory and

The Role and Interdependence of Economic Indicators in Optimal Natural Gas Supply in Macedonia as a transitional Economy

Directory of Open Access Journals (Sweden)

Daniela Mladenovska

2018-02-01

Full Text Available This paper elaborates the importance of the economic set of indicators relevant for assessing natural gas supply options, as a part of the multi criteria decision making (MCDM method. Such an approach is a useful tool for decision makers. Thus, the paper is not only dealing with economic indicators arising from investment and other types of costs, but it mostly focuses on macroeconomic environment and macroeconomic preconditions strongly related to energy infrastructure. MCDM is firstly utilized to calculate the indicator’s weighting factors, and further, regression analyses are performed in terms of identifying interdependencies among the indicators.

Sustainability-Related Decision Making in Industrial Buildings: An AHP Analysis

Directory of Open Access Journals (Sweden)

Jesús Cuadrado

2015-01-01

Full Text Available Few other sectors have such a great impact on sustainability as the construction industry, in which concerns over the environmental dimension have been growing for some time. The sustainability assessment methodology presented in this paper is an AHP (Analytic Hierarchy Process based on Multicriteria Decision Making (MCDM and includes the main sustainability factors for consideration in the construction of an industrial building (environmental, economic, and social, as well as other factors that greatly influence the conceptual design of the building (employee safety, corporate image. Its simplicity is well adapted to its main objective, to serve as a sustainability-related decision making tool in industrial building projects, during the design stage. Accompanied by an economic valuation of the actions to be undertaken, this tool means that the most cost-effective solution may be selected from among the various options.

Investigation of Multi-Criteria Decision Consistency: A Triplex Approach to Optimal Oilfield Portfolio Investment Decisions

Science.gov (United States)

Qaradaghi, Mohammed

techniques that can provide more flexibility and inclusiveness in the decision making process, such as Multi-Criteria Decision Making (MCDM) methods. However, it can be observed that the MCDM literature: 1) is primarily focused on suggesting certain MCDM techniques to specific problems without providing sufficient evidence for their selection, 2) is inadequate in addressing MCDM in E&P portfolio selection and prioritization compared with other fields, and 3) does not address prioritizing brownfields (i.e., developed oilfields). This research study aims at addressing the above drawbacks through combining three MCDM methods (i.e., AHP, PROMETHEE and TOPSIS) into a single decision making tool that can support optimal oilfield portfolio investment decisions by helping determine the share of each oilfield of the total development resources allocated. Selecting these methods is reinforced by a pre-deployment and post-deployment validation framework. In addition, this study proposes a two-dimensional consistency test to verify the output coherence or prioritization stability of the MCDM methods in comparison with an intuitive approach. Nine scenarios representing all possible outcomes of the internal and external consistency tests are further proposed to reach a conclusion. The methodology is applied to a case study of six major oilfields in Iraq to generate percentage shares of each oilfield of a total production target that is in line with Iraq's aspiration to increase oil production. However, the methodology is intended to be applicable to other E&P portfolio investment prioritization scenarios by taking the specific contextual characteristics into consideration.

Methods of making textured catalysts

Science.gov (United States)

Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

2010-08-17

A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

A Sustainability Assessment Methodology for Prioritizing the Technologies of Groundwater Contamination Remediation

DEFF Research Database (Denmark)

An, Da; Xi, Beidou; Wang, Yue

2016-01-01

More and more groundwater has 23 been polluted recently, and technologies for groundwater contamination remediation are of vital importance; however, it is usually difficult for the users to select the most suitable technology among multiple alternatives. In order to address this, this study aims...... at developing a sustainability assessment framework for prioritizing the technologies for groundwater contamination remediation by combining the concept of sustainability and multi-criteria decision making (MCDM) method. A criterion system which consists of six criteria in three aspects has been proposed...... for sustainability assessment of technologies for groundwater contamination remediation, and a novel MCDM method by combining the logarithmic fuzzy preference programming based fuzzy analytic hierarchy process and the improved ELECTRE method has been developed for prioritizing the alternatives. In order...

A Fuzzy Group Prioritization Method for Deriving Weights and its Software Implementation

Directory of Open Access Journals (Sweden)

Tarifa Almulhim

2013-09-01

Full Text Available Several Multi-Criteria Decision Making (MCDM methods involve pairwise comparisons to obtain the preferences of decision makers (DMs. This paper proposes a fuzzy group prioritization method for deriving group priorities/weights from fuzzy pairwise comparison matrices. The proposed method extends the Fuzzy Preferences Programming Method (FPP by considering the different importance weights of multiple DMs . The elements of the group pairwise comparison matrices are presented as fuzzy numbers rather than exact numerical values, in order to model the uncertainty and imprecision in the DMs’ judgments. Unlike the known fuzzy prioritization techniques, the proposed method is able to derive crisp weights from incomplete and fuzzy set of comparison judgments and does not require additional aggregation procedures. A prototype of a decision tool is developed to assist DMs to implement the proposed method for solving fuzzy group prioritization problems in MATLAB. Detailed numerical examples are used to illustrate the proposed approach.

Multi-criteria decision making on strategic selection of wind farms

Energy Technology Data Exchange (ETDEWEB)

Lee, Amy H.I. [Department of Industrial Engineering and System Management, Chung Hua University, Hsinchu (China); Chen, Hsing Hung [Faculty of Management and Administration, Macau University of Science and Technology, Taipa (Macau); Kang, He-Yau [Department of Industrial Engineering and Management, National Chin-Yi University of Technology, Taiping, Taichung (China)

2009-01-15

With maturity of advanced technologies and urgent requirement for maintaining a healthy environment with reasonable price, China is moving toward a trend of generating electricity from renewable wind resources. How to select a suitable wind farm becomes an important focus for stakeholders. This paper first briefly introduces wind farm and then develops its critical success criteria. A new multi-criteria decision-making (MCDM) model, based on the analytic hierarchy process (AHP) associated with benefits, opportunities, costs and risks (BOCR), is proposed to help select a suitable wind farm project. Multiple factors that affect the success of wind farm operations are analyzed by taking into account experts' opinions, and a performance ranking of the wind farms is generated. (author)

"There is no carnival without samba"

DEFF Research Database (Denmark)

Jabbour, Charbel Jose Chiappetta; Jugend, Daniel; Jabbour, Ana Beatriz Lopes de Sousa

2018-01-01

was based on on-location visits, in-depth interviews, and consensus building among R&D, sustainability, and quality managers. A multi-criteria decision-making (MCDM) approach was adopted through interpretive structural modelling (ISM), a method that assists decision makers to transform complex models...

Towards a sustainable capacity expansion of the Danish biogas sector

NARCIS (Netherlands)

Bojesen, M.; Boerboom, L.G.J.; Skov-Petersen, H.

2015-01-01

Promotion of bioenergy production is an important contemporary topic around the world. Vast amounts of research are allocated towards analysing and understanding bioenergy systems, which are by nature multi-faceted. Despite a focus on the deployment of multi-criteria decision-making (MCDM) methods

A Combined group EA-PROMETHEE method for a supplier selection problem

Directory of Open Access Journals (Sweden)

Hamid Reza Rezaee Kelidbari

2016-07-01

Full Text Available One of the important decisions which impacts all firms’ activities is the supplier selection problem. Since the 1950s, several works have addressed this problem by treating different aspects and instances. In this paper, a combined multiple criteria decision making (MCDM technique (EA-PROMETHEE has been applied to implement a proper decision making. To this aim, after reviewing the theoretical background regarding to supplier selection, the extension analysis (EA is used to determine the importance of criteria and PROMETHEE for appraisal of suppliers based on the criteria. An empirical example illustrated the proposed approach.

Evaluation of Forklift Alternatives with KEMIRA-M Method

Directory of Open Access Journals (Sweden)

Gizem SARIÇALI

2017-01-01

Full Text Available Businesses generally uses forklifts for lifting, stacking and transporting to the desired location of heavy loads in case of human power is not enough. It is important to select suitable forklifts for the physical conditions of the warehouses in order to ensure the active use of them. In storage, the selection of the appropriate forklift for physical conditions of the warehouse is important to use warehouses effectively. In this study, KEMIRA-M (KEmeny Median Indicator Rank Accordance-Modified method, which is a new Multi-Criteria Decision Making (MCDM method, was used to evaluate forklift alternatives to be used in storage and to determine the most appropriate forklift for the textile company. This method does not require much initial information, so it can be used to determine the weights of the criteria and to select the most appropriate alternative. As a result of the study, forklift alternative that will best meet the needs of the textile company was determined with KEMIRA-M method, by this way the company has been aided during the decision process.

Multi-Criteria Analysis of Laser Cut Surface Characteristics in CO2 Laser Cutting of Stainless Steel

Directory of Open Access Journals (Sweden)

M. Radovanović

2015-06-01

Full Text Available In this paper an approach for multi-criteria analysis of laser cut surface characteristics using multi-criteria decision making (MCDM approach was presented. Laser cutting experiment was conducted based on Taguchi’s L27 experimental design by varying laser power, cutting speed, assist gas pressure and focus position at three levels. Multi-criteria analysis was performed by using the weighted aggregated sum product assessment (WASPAS method while considering burr height, drag line separation, depth of separation line, surface roughness and perpendicularity of the cut as assessment criteria. Based on conducted experimental investigation the MCDM model with 27 alternatives (laser cuts and five criteria was developed. The relative importance of criteria was determined by using pair-wise comparison matrix and geometric mean method of the analytic hierarchy process (AHP method.

Catalysts, methods of making catalysts, and methods of use

KAUST Repository

Renard, Laetitia; El Eter, Mohamad; Caps, Valerie; Basset, Jean-Marie

2014-01-01

Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

Catalysts, methods of making catalysts, and methods of use

KAUST Repository

Renard, Laetitia

2014-03-06

Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

Multi-criteria Generation-Expansion Planning with Carbon dioxide emissions and Nuclear Safety considerations

International Nuclear Information System (INIS)

Lee, Hun Gyu; Kim, Young Chang

2010-01-01

A multiple criteria decision making (MCDM) method is developed to aid decision makers in Generation Expansion planning and management. Traditionally, the prime objective of an electric utility's generation-expansion planning has been to determine the minimum cost supply plans that meet expected demands over a planning horizon (typically 10 to 30 years). Today, however, the nature of decision environments has changed substantially. Increased policy attention is given to solve the multiple tradeoff function including environmental and social factors as well as economic one related to nuclear power expansion. In order to deal with this MCDM problem, the Analytic Hierarchy Process (AHP) Model is applied

Assessment of Different Metal Screw Joint Parameters by Using Multiple Criteria Analysis Methods

Directory of Open Access Journals (Sweden)

Audrius Čereška

2018-05-01

Full Text Available This study compares screw joints made of different materials, including screws of different diameters. For that purpose, 8, 10, 12, 14, 16 mm diameter steel screws and various parts made of aluminum (Al, steel (Stl, bronze (Brz, cast iron (CI, copper (Cu and brass (Br are considered. Multiple criteria decision making (MCDM methods such as evaluation based on distance from average solution (EDAS, simple additive weighting (SAW, technique for order of preference by similarity to ideal solution (TOPSIS and complex proportional assessment (COPRAS are utilized to assess reliability of screw joints also considering cost issues. The entropy, criterion impact loss (CILOS and integrated determination of objective criteria weights (IDOCRIW methods are utilized to assess weights of decision criteria and find the best design alternative. Numerical results confirm the validity of the proposed approach.

Identification of a Threshold Value for the DEMATEL Method: Using the Maximum Mean De-Entropy Algorithm

Science.gov (United States)

Chung-Wei, Li; Gwo-Hshiung, Tzeng

To deal with complex problems, structuring them through graphical representations and analyzing causal influences can aid in illuminating complex issues, systems, or concepts. The DEMATEL method is a methodology which can be used for researching and solving complicated and intertwined problem groups. The end product of the DEMATEL process is a visual representation—the impact-relations map—by which respondents organize their own actions in the world. The applicability of the DEMATEL method is widespread, ranging from analyzing world problematique decision making to industrial planning. The most important property of the DEMATEL method used in the multi-criteria decision making (MCDM) field is to construct interrelations between criteria. In order to obtain a suitable impact-relations map, an appropriate threshold value is needed to obtain adequate information for further analysis and decision-making. In this paper, we propose a method based on the entropy approach, the maximum mean de-entropy algorithm, to achieve this purpose. Using real cases to find the interrelationships between the criteria for evaluating effects in E-learning programs as an examples, we will compare the results obtained from the respondents and from our method, and discuss that the different impact-relations maps from these two methods.

The Use of MIVES as a Sustainability Assessment MCDM Method for Architecture and Civil Engineering Applications

Directory of Open Access Journals (Sweden)

Oriol Pons

2016-05-01

Full Text Available Environmental and sustainability assessment tools have an important role in moving towards a better world, bringing knowledge and raising awareness. In the architecture and civil engineering sector, these assessment tools help in moving forward to constructions that have less economic, environmental and social impacts. At present, there are numerous assessment tools and methods with different approaches and scopes that have been analyzed in numerous technical reviews. However, there is no agreement about which method should be used for each evaluation case. This research paper synthetically analyzes the main sustainability assessment methods for the construction sector, comparing their strengths and weaknesses in order to present the challenges of the Spanish Integrated Value Model for Sustainability Assessment (MIVES. MIVES is a Multi-Criteria Decision Making method based on the value function concept and the Seminars of experts. Then, this article analyzes MIVES advantages and weak points by going through its methodology and two representative applications. At the end, the area of application of MIVES is described in detail along with the general application cases of the main types of assessment tools and methods.

Dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua; Pinnau, Ingo; Ghanem, Bader

2015-01-01

Embodiments of the present disclosure provide for an aromatic dianhydride, a method of making an aromatic dianhydride, an aromatic dianhydride-based polyimide, a method of making an aromatic dianhydride-based polyimide, and the like.

Dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua

2015-01-08

Embodiments of the present disclosure provide for an aromatic dianhydride, a method of making an aromatic dianhydride, an aromatic dianhydride-based polyimide, a method of making an aromatic dianhydride-based polyimide, and the like.

A hybrid TOPSIS-BSC method for strategic planning

Directory of Open Access Journals (Sweden)

Mohammad Reza Shojaee

2012-09-01

Full Text Available For years, tangible assets used to be the most important precious wealth of organizations. However, the recent advances in technology has changed this concept and today, intangible assets such as human resources, customers, processes are playing essential roles on making strategies. In this paper, we present a study to setup appropriate strategies using the implementation of balanced score card in four perspectives of customers, processes, learning and financial. The proposed study of this paper gathers important factors through three different brainstorming sessions and prioritize them using TOPSIS method. Based on the results of MCDM technique, selecting appropriate target market for penetration is the number one priority followed by having good accounting system and preparing for more diversified production. These are the most important items influencing strategic planning. Therefore, the study uses BSC for the first two important strategies and discusses possible actions for productivity improvement.

Evaluating the performance of free-formed surface parts using an analytic network process

Science.gov (United States)

Qian, Xueming; Ma, Yanqiao; Liang, Dezhi

2018-03-01

To successfully design parts with a free-formed surface, the critical issue of how to evaluate and select a favourable evaluation strategy before design is raised. The evaluation of free-formed surface parts is a multiple criteria decision-making (MCDM) problem that requires the consideration of a large number of interdependent factors. The analytic network process (ANP) is a relatively new MCDM method that can systematically deal with all kinds of dependences. In this paper, the factors, which come from the life-cycle and influence the design of free-formed surface parts, are proposed. After analysing the interdependence among these factors, a Hybrid ANP (HANP) structure for evaluating the part’s curved surface is constructed. Then, a HANP evaluation of an impeller is presented to illustrate the application of the proposed method.

Evaluating high risks in large-scale projects using an extended VIKOR method under a fuzzy environment

Directory of Open Access Journals (Sweden)

S. Ebrahimnejad

2012-04-01

Full Text Available The complexity of large-scale projects has led to numerous risks in their life cycle. This paper presents a new risk evaluation approach in order to rank the high risks in large-scale projects and improve the performance of these projects. It is based on the fuzzy set theory that is an effective tool to handle uncertainty. It is also based on an extended VIKOR method that is one of the well-known multiple criteria decision-making (MCDM methods. The proposed decision-making approach integrates knowledge and experience acquired from professional experts, since they perform the risk identification and also the subjective judgments of the performance rating for high risks in terms of conflicting criteria, including probability, impact, quickness of reaction toward risk, event measure quantity and event capability criteria. The most notable difference of the proposed VIKOR method with its traditional version is just the use of fuzzy decision-matrix data to calculate the ranking index without the need to ask the experts. Finally, the proposed approach is illustrated with a real-case study in an Iranian power plant project, and the associated results are compared with two well-known decision-making methods under a fuzzy environment.

A COPRAS-F base multi-criteria group decision making approach for site selection of wind farm

Directory of Open Access Journals (Sweden)

Nikhil Chandra Chatterjee

2013-01-01

Full Text Available Today global warming is on the rise and the natural resources are getting consumed at a faster rate. Power consumption has increased many folds to cater the human need. Thus renewable energy resources are the only option available at this juncture. Wind energy is one of the renewable energy. Location selection for wind farm takes an important role on power generation. However, the location selection is a complex multicriteria problem due to the criteria factors which are conflicting in nature as well as uncertain. The process becomes more complex when a group of decision makers are involved in decision making. In the present study, a COPRAS (COmplex PRoportional ASsessment based multi-criteria decision-making (MCDM methodology is done under fuzzy environment with the help of multiple decision makers. More specifically, this study is aimed to focus the applicability of COPRAS-F as a strategic decision making tools to handle the group decision-making problems.

Strategic enterprise resource planning in a health-care system using a multicriteria decision-making model.

Science.gov (United States)

Lee, Chang Won; Kwak, N K

2011-04-01

This paper deals with strategic enterprise resource planning (ERP) in a health-care system using a multicriteria decision-making (MCDM) model. The model is developed and analyzed on the basis of the data obtained from a leading patient-oriented provider of health-care services in Korea. Goal criteria and priorities are identified and established via the analytic hierarchy process (AHP). Goal programming (GP) is utilized to derive satisfying solutions for designing, evaluating, and implementing an ERP. The model results are evaluated and sensitivity analyses are conducted in an effort to enhance the model applicability. The case study provides management with valuable insights for planning and controlling health-care activities and services.

Online Learning Era: Exploring the Most Decisive Determinants of MOOCs in Taiwanese Higher Education

Science.gov (United States)

Hsieh, Ming-Yuan

2016-01-01

Because the development of Taiwanese Massive Open Online Course (MOOCs) websites is at this moment full of vitality, this research employs a series of analytical cross-measurements of Quality Function Deployment method of House of Quality (QFD-HOQ) model and Multiple Criteria Decision Making (MCDM) methodology to cross-evaluate the weighted…

Multi-criteria ranking of energy generation scenarios with Monte Carlo simulation

International Nuclear Information System (INIS)

Baležentis, Tomas; Streimikiene, Dalia

2017-01-01

Highlights: • Two advanced optimization models were applied for EU energy policy scenarios development. • Several advanced MCDA were applied for energy policy scenarios ranking: WASPAS, ARAS, TOPSIS. • A Monte Carlo simulation was applied for sensitivity analysis of scenarios ranking. • New policy insights in terms of energy scenarios forecasting were provided based on research conducted. - Abstract: Integrated Assessment Models (IAMs) are omnipresent in energy policy analysis. Even though IAMs can successfully handle uncertainty pertinent to energy planning problems, they render multiple variables as outputs of the modelling. Therefore, policy makers are faced with multiple energy development scenarios and goals. Specifically, technical, environmental, and economic aspects are represented by multiple criteria, which, in turn, are related to conflicting objectives. Preferences of decision makers need to be taken into account in order to facilitate effective energy planning. Multi-criteria decision making (MCDM) tools are relevant in aggregating diverse information and thus comparing alternative energy planning options. The paper aims at ranking European Union (EU) energy development scenarios based on several IAMs with respect to multiple criteria. By doing so, we account for uncertainty surrounding policy priorities outside the IAM. In order to follow a sustainable approach, the ranking of policy options is based on EU energy policy priorities: energy efficiency improvements, increased use of renewables, reduction in and low mitigations costs of GHG emission. The ranking of scenarios is based on the estimates rendered by the two advanced IAMs relying on different approaches, namely TIAM and WITCH. The data are fed into the three MCDM techniques: the method of weighted aggregated sum/product assessment (WASPAS), the Additive Ratio Assessment (ARAS) method, and technique for order preference by similarity to ideal solution (TOPSIS). As MCDM techniques allow

The application of a multi-parameter analysis in choosing the location of a new solid waste landfill in Serbia.

Science.gov (United States)

Milosevic, Igor; Naunovic, Zorana

2013-10-01

This article presents a process of evaluation and selection of the most favourable location for a sanitary landfill facility from three alternative locations, by applying a multi-criteria decision-making (MCDM) method. An incorrect choice of location for a landfill facility can have a significant negative economic and environmental impact, such as the pollution of air, ground and surface waters. The aim of this article is to present several improvements in the practical process of landfill site selection using the VIKOR MCDM compromise ranking method integrated with a fuzzy analytic hierarchy process approach for determining the evaluation criteria weighing coefficients. The VIKOR method focuses on ranking and selecting from a set of alternatives in the presence of conflicting and non-commensurable (different units) criteria, and on proposing a compromise solution that is closest to the ideal solution. The work shows that valuable site ranking lists can be obtained using the VIKOR method, which is a suitable choice when there is a large number of relevant input parameters.

Application of TOPSIS and VIKOR improved versions in a multi criteria decision analysis to develop an optimized municipal solid waste management model.

Science.gov (United States)

Aghajani Mir, M; Taherei Ghazvinei, P; Sulaiman, N M N; Basri, N E A; Saheri, S; Mahmood, N Z; Jahan, A; Begum, R A; Aghamohammadi, N

2016-01-15

Selecting a suitable Multi Criteria Decision Making (MCDM) method is a crucial stage to establish a Solid Waste Management (SWM) system. Main objective of the current study is to demonstrate and evaluate a proposed method using Multiple Criteria Decision Making methods (MCDM). An improved version of Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) applied to obtain the best municipal solid waste management method by comparing and ranking the scenarios. Applying this method in order to rank treatment methods is introduced as one contribution of the study. Besides, Viekriterijumsko Kompromisno Rangiranje (VIKOR) compromise solution method applied for sensitivity analyses. The proposed method can assist urban decision makers in prioritizing and selecting an optimized Municipal Solid Waste (MSW) treatment system. Besides, a logical and systematic scientific method was proposed to guide an appropriate decision-making. A modified TOPSIS methodology as a superior to existing methods for first time was applied for MSW problems. Applying this method in order to rank treatment methods is introduced as one contribution of the study. Next, 11 scenarios of MSW treatment methods are defined and compared environmentally and economically based on the waste management conditions. Results show that integrating a sanitary landfill (18.1%), RDF (3.1%), composting (2%), anaerobic digestion (40.4%), and recycling (36.4%) was an optimized model of integrated waste management. An applied decision-making structure provides the opportunity for optimum decision-making. Therefore, the mix of recycling and anaerobic digestion and a sanitary landfill with Electricity Production (EP) are the preferred options for MSW management. Copyright © 2015 Elsevier Ltd. All rights reserved.

Conjugated polymer nanoparticles, methods of using, and methods of making

KAUST Repository

Habuchi, Satoshi; Piwonski, Hubert Marek; Michinobu, Tsuyoshi

2017-01-01

Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

Conjugated polymer nanoparticles, methods of using, and methods of making

KAUST Repository

Habuchi, Satoshi

2017-03-16

Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

Fuzzy multiple attribute decision making methods and applications

CERN Document Server

Chen, Shu-Jen

1992-01-01

This monograph is intended for an advanced undergraduate or graduate course as well as for researchers, who want a compilation of developments in this rapidly growing field of operations research. This is a sequel to our previous works: "Multiple Objective Decision Making--Methods and Applications: A state-of-the-Art Survey" (No.164 of the Lecture Notes); "Multiple Attribute Decision Making--Methods and Applications: A State-of-the-Art Survey" (No.186 of the Lecture Notes); and "Group Decision Making under Multiple Criteria--Methods and Applications" (No.281 of the Lecture Notes). In this monograph, the literature on methods of fuzzy Multiple Attribute Decision Making (MADM) has been reviewed thoroughly and critically, and classified systematically. This study provides readers with a capsule look into the existing methods, their characteristics, and applicability to the analysis of fuzzy MADM problems. The basic concepts and algorithms from the classical MADM methods have been used in the development of the f...

Ranking Schools' Academic Performance Using a Fuzzy VIKOR

Science.gov (United States)

Musani, Suhaina; Aziz Jemain, Abdul

2015-06-01

Determination rank is structuring alternatives in order of priority. It is based on the criteria determined for each alternative involved. Evaluation criteria are performed and then a composite index composed of each alternative for the purpose of arranging in order of preference alternatives. This practice is known as multiple criteria decision making (MCDM). There are several common approaches to MCDM, one of the practice is known as VIKOR (Multi-criteria Optimization and Compromise Solution). The objective of this study is to develop a rational method for school ranking based on linguistic information of a criterion. The school represents an alternative, while the results for a number of subjects as the criterion. The results of the examination for a course, is given according to the student percentage of each grade. Five grades of excellence, honours, average, pass and fail is used to indicate a level of achievement in linguistics. Linguistic variables are transformed to fuzzy numbers to form a composite index of school performance. Results showed that fuzzy set theory can solve the limitations of using MCDM when there is uncertainty problems exist in the data.

Study of Decision Framework of Shopping Mall Photovoltaic Plan Selection Based on DEMATEL and ELECTRE III with Symmetry under Neutrosophic Set Environment

Directory of Open Access Journals (Sweden)

Jiangbo Feng

2018-05-01

Full Text Available Rooftop distributed photovoltaic projects have been quickly proposed in China because of policy promotion. Before, the rooftops of the shopping mall had not been occupied, and it was urged to have a decision-making framework to select suitable shopping mall photovoltaic plans. However, a traditional multi-criteria decision-making (MCDM method failed to solve this issue at the same time, due to the following three defects: the interactions problems between the criteria, the loss of evaluation information in the conversion process, and the compensation problems between diverse criteria. In this paper, an integrated MCDM framework was proposed to address these problems. First of all, the compositive evaluation index was constructed, and the application of decision-making trial and evaluation laboratory (DEMATEL method helped analyze the internal influence and connection behind each criterion. Then, the interval-valued neutrosophic set was utilized to express the imperfect knowledge of experts group and avoid the information loss. Next, an extended elimination et choice translation reality (ELECTRE III method was applied, and it succeed in avoiding the compensation problem and obtaining the scientific result. The integrated method used maintained symmetry in the solar photovoltaic (PV investment. Last but not least, a comparative analysis using Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS method and VIKOR method was carried out, and alternative plan X1 ranks first at the same. The outcome certified the correctness and rationality of the results obtained in this study.

Uncertain multi-attribute decision making methods and applications

CERN Document Server

Xu, Zeshui

2015-01-01

This book introduces methods for uncertain multi-attribute decision making including uncertain multi-attribute group decision making and their applications to supply chain management, investment decision making, personnel assessment, redesigning products, maintenance services, military system efficiency evaluation. Multi-attribute decision making, also known as multi-objective decision making with finite alternatives, is an important component of modern decision science. The theory and methods of multi-attribute decision making have been extensively applied in engineering, economics, management and military contexts, such as venture capital project evaluation, facility location, bidding, development ranking of industrial sectors and so on. Over the last few decades, great attention has been paid to research on multi-attribute decision making in uncertain settings, due to the increasing complexity and uncertainty of supposedly objective aspects and the fuzziness of human thought. This book can be used as a ref...

O-hydroxy-functionalized diamines, polymides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua; Ghanem, Bader S.; Pinnau, Ingo

2016-01-01

Embodiments of the present disclosure provide for an ortho (o)-hydroxy-functionalized diamine, a method of making an o-hydroxy-functionalized diamine, an o-hydroxy-functionalized diamine-based polyimide, a method of making an o-hydroxy-functionalized diamine imide, methods of gas separation, and the like.

O-hydroxy-functionalized diamines, polymides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua

2016-01-21

Embodiments of the present disclosure provide for an ortho (o)-hydroxy-functionalized diamine, a method of making an o-hydroxy-functionalized diamine, an o-hydroxy-functionalized diamine-based polyimide, a method of making an o-hydroxy-functionalized diamine imide, methods of gas separation, and the like.

System and method for making quantum dots

KAUST Repository

Bakr, Osman; Pan, Jun; El-Ballouli, Ala'a O.; Knudsen, Kristian Rahbek; Abdelhady, Ahmed L.

2015-01-01

Embodiments of the present disclosure provide for methods of making quantum dots (QDs) (passivated or unpassivated) using a continuous flow process, systems for making QDs using a continuous flow process, and the like. In one or more embodiments

Spatial UTA (S-UTA) - a new approach for raster-based GIS multicriteria suitability analysis and its use in implementing natural systems for wastewater treatment.

Science.gov (United States)

Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

2013-08-15

The identification of sites for locating new natural systems for wastewater treatment (NSWT), such as stabilization ponds and constructed wetlands, should combine multiple crucial factors (environmental, design, social and economic), and thus the implementation of multicriteria decision-making (MCDM) methods is required. In addition, the spatial nature of the site selection process necessitates the use of geographic information systems (GISs) because they are unanimously recognized as the most appropriate tool capable of supporting sophisticated spatial decision making. The resulting multicriteria spatial decision support systems (MC-SDSSs) provide a consistent framework for dealing with conflicting objectives while integrating the decision makers' (DMs') preferences in spatially related patterns/problems. A map-based, interactive UTAII implementation is presented, which provides a link between a well-understood decision support method and exploratory geographic visualization. Spatial UTA (S-UTA) is applied in a real case study concerning the ranking of candidate sites for implementing natural systems for wastewater treatment in the Evros-Rodopi prefectures of northeastern Greece. Finally, the obtained results are compared with those derived using other MCDM approaches to evaluate the performance of S-UTA in GIS-based land use suitability analyses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Method for making nanomaterials

Science.gov (United States)

Fan, Hongyou; Wu, Huimeng

2013-06-04

A method of making a nanostructure by preparing a face centered cubic-ordered metal nanoparticle film from metal nanoparticles, such as gold and silver nanoparticles, exerting a hydrostatic pressure upon the film at pressures of several gigapascals, followed by applying a non-hydrostatic stress perpendicularly at a pressure greater than approximately 10 GPA to form an array of nanowires with individual nanowires having a relatively uniform length, average diameter and density.

Determination of laser cutting process conditions using the preference selection index method

Science.gov (United States)

Madić, Miloš; Antucheviciene, Jurgita; Radovanović, Miroslav; Petković, Dušan

2017-03-01

Determination of adequate parameter settings for improvement of multiple quality and productivity characteristics at the same time is of great practical importance in laser cutting. This paper discusses the application of the preference selection index (PSI) method for discrete optimization of the CO2 laser cutting of stainless steel. The main motivation for application of the PSI method is that it represents an almost unexplored multi-criteria decision making (MCDM) method, and moreover, this method does not require assessment of the considered criteria relative significances. After reviewing and comparing the existing approaches for determination of laser cutting parameter settings, the application of the PSI method was explained in detail. Experiment realization was conducted by using Taguchi's L27 orthogonal array. Roughness of the cut surface, heat affected zone (HAZ), kerf width and material removal rate (MRR) were considered as optimization criteria. The proposed methodology is found to be very useful in real manufacturing environment since it involves simple calculations which are easy to understand and implement. However, while applying the PSI method it was observed that it can not be useful in situations where there exist a large number of alternatives which have attribute values (performances) very close to those which are preferred.

Using fuzzy analytical hierarchy process (AHP to evaluate web development platform

Directory of Open Access Journals (Sweden)

Ahmad Sarfaraz

2012-01-01

Full Text Available Web development is plays an important role on business plans and people's lives. One of the key decisions in which both short-term and long-term success of the project depends is choosing the right development platform. Its criticality can be judged by the fact that once a platform is chosen, one has to live with it throughout the software development life cycle. The entire shape of the project depends on the language, operating system, tools, frameworks etc., in short the web development platform chosen. In addition, choosing the right platform is a multi criteria decision making (MCDM problem. We propose a fuzzy analytical hierarchy process model to solve the MCDM problem. We try to tap the real-life modeling potential of fuzzy logic and conjugate it with the commonly used powerful AHP modeling method.

Triptycene-based ladder monomers and polymers, methods of making each, and methods of use

KAUST Repository

Pinnau, Ingo; Ghanem, Bader; Swaidan, Raja

2015-01-01

Embodiments of the present disclosure provide for a triptycene-based A-B monomer, a method of making a triptycene-based A-B monomer, a triptycene-based ladder polymer, a method of making a triptycene-based ladder polymers, a method of using

Integrated GIS-Based Site Selection of Hillside Development for Future Growth of Urban Areas

Directory of Open Access Journals (Sweden)

Imtiaz Ahmed Chandio

2016-04-01

Full Text Available Urbanization is a challenging issue for developing countries, like Malaysia. Penang Island is one of the states of Malaysia selected as a study area where limited flat land exists. As a result, this would create urban environmental problems, such as unstable slopes and landslides due to uneven topography. The purpose of this study was to develop land suitability model for hillside development. Hence, this research aims land suitability analysis modelling for hillside development by using integrated GIS (Geographic Information System based MCDM (Multi-Criteria Decision Making approach. The hill land portion of Penang Island was selected for hillside site development using GIS and AHP (Analytic Hierarchy Process as a MCDM method for sustainable hillside development. This study found that 15% of land was highly suitable, 27% moderately suitable, 41% less suitable, and 17% not suitable. Therefore, this research can be consistently used by the concerned authorities for sustainable hillside urban planning and development. This approach can be used as a policy tool in decision making of urban planning and development.

Method for selection of optimal road safety composite index with examples from DEA and TOPSIS method.

Science.gov (United States)

Rosić, Miroslav; Pešić, Dalibor; Kukić, Dragoslav; Antić, Boris; Božović, Milan

2017-01-01

Concept of composite road safety index is a popular and relatively new concept among road safety experts around the world. As there is a constant need for comparison among different units (countries, municipalities, roads, etc.) there is need to choose an adequate method which will make comparison fair to all compared units. Usually comparisons using one specific indicator (parameter which describes safety or unsafety) can end up with totally different ranking of compared units which is quite complicated for decision maker to determine "real best performers". Need for composite road safety index is becoming dominant since road safety presents a complex system where more and more indicators are constantly being developed to describe it. Among wide variety of models and developed composite indexes, a decision maker can come to even bigger dilemma than choosing one adequate risk measure. As DEA and TOPSIS are well-known mathematical models and have recently been increasingly used for risk evaluation in road safety, we used efficiencies (composite indexes) obtained by different models, based on DEA and TOPSIS, to present PROMETHEE-RS model for selection of optimal method for composite index. Method for selection of optimal composite index is based on three parameters (average correlation, average rank variation and average cluster variation) inserted into a PROMETHEE MCDM method in order to choose the optimal one. The model is tested by comparing 27 police departments in Serbia. Copyright © 2016 Elsevier Ltd. All rights reserved.

To Make Good Decision: A Group DSS for Multiple Criteria Alternative Rank and Selection

Directory of Open Access Journals (Sweden)

Chen-Shu Wang

2015-01-01

Full Text Available Decision making is a recursive process and usually involves multiple decision criteria. However, such multiple criteria decision making may have a problem in which partial decision criteria may conflict with each other. An information technology, such as the decision support system (DSS and group DSS (GDSS, emerges to assist decision maker for decision-making process. Both the DSS and GDSS should integrate with a symmetrical approach to assist decision maker to take all decision criteria into consideration simultaneously. This study proposes a GDSS architecture named hybrid decision-making support model (HDMSM and integrated four decision approaches (Delphi, DEMATEL, ANP, and MDS to help decision maker to rank and select appropriate alternatives. The HDMSM consists of five steps, namely, criteria identification, criteria correlation calculation, criteria evaluation, critical criteria selection, and alternative rank and comparison. Finally, to validate the proposed feasibility of the proposed model, this study also conducts a case study to find out the important indexes of corporate social responsibility (CSR from multiple perspectives. As the case study demonstrates the proposed HDMSM enables a group of decision makers to implement the MCDM effectively and help them to analyze the relation and degree of mutual influence among different evaluation factors.

Health-Care Waste Treatment Technology Selection Using the Interval 2-Tuple Induced TOPSIS Method

Directory of Open Access Journals (Sweden)

Chao Lu

2016-06-01

Full Text Available Health-care waste (HCW management is a major challenge for municipalities, particularly in the cities of developing nations. Selecting the best treatment technology for HCW can be regarded as a complex multi-criteria decision making (MCDM issue involving a number of alternatives and multiple evaluation criteria. In addition, decision makers tend to express their personal assessments via multi-granularity linguistic term sets because of different backgrounds and knowledge, some of which may be imprecise, uncertain and incomplete. Therefore, the main objective of this study is to propose a new hybrid decision making approach combining interval 2-tuple induced distance operators with the technique for order preference by similarity to an ideal solution (TOPSIS for tackling HCW treatment technology selection problems with linguistic information. The proposed interval 2-tuple induced TOPSIS (ITI-TOPSIS can not only model the uncertainty and diversity of the assessment information given by decision makers, but also reflect the complex attitudinal characters of decision makers and provide much more complete information for the selection of the optimum disposal alternative. Finally, an empirical example in Shanghai, China is provided to illustrate the proposed decision making method, and results show that the ITI-TOPSIS proposed in this paper can solve the problem of HCW treatment technology selection effectively.

Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods Volume 2

CERN Document Server

Rao, R Venkata

2013-01-01

Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods presents the concepts and details of applications of MADM methods. A range of methods are covered including Analytic Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), VIšekriterijumsko KOmpromisno Rangiranje (VIKOR), Data Envelopment Analysis (DEA), Preference Ranking METHod for Enrichment Evaluations (PROMETHEE), ELimination Et Choix Traduisant la Realité (ELECTRE), COmplex PRoportional ASsessment (COPRAS), Grey Relational Analysis (GRA), UTility Additive (UTA), and Ordered Weighted Averaging (OWA). The existing MADM methods are improved upon and three novel multiple attribute decision making methods for solving the decision making problems of the manufacturing environment are proposed. The concept of integrated weights is introduced in the proposed subjective and objective integrated weights (SOIW) method and the weighted Euclidean distance ba...

Triptycene-based ladder monomers and polymers, methods of making each, and methods of use

KAUST Repository

Pinnau, Ingo

2015-02-05

Embodiments of the present disclosure provide for a triptycene-based A-B monomer, a method of making a triptycene-based A-B monomer, a triptycene-based ladder polymer, a method of making a triptycene-based ladder polymers, a method of using triptycene-based ladder polymers, a structure incorporating triptycene-based ladder polymers, a method of gas separation, and the like.

An FAHP-TOPSIS framework for analysis of the employee productivity in the Serbian electrical power companies

Directory of Open Access Journals (Sweden)

Snezana Pavle Knezevic

2017-09-01

Full Text Available The aim of this paper is to apply an integrated model, which combines methods of classical and fuzzy Multi-criteria decision making (MCDM in selected six large equity companies from the Serbian energy sector. The data considered are retrieved from the official financial statements. Four main criteria were analyzed, identified by the previous researchers and pointing to the employees productivity: Operating income/Number of employees, Equity/Number of employees, Net income/Number of employees and Total assets/Number of employees. The contribution of this paper lies in the application of a hybrid model that integrates two MCDM methods: Fuzzy Analytic Hierarchy Process (FAHP and Technique for Order Performance by Similarity to Ideal Solution (TOPSIS to analyse the employee productivity in selected D-Electrical power supply companies operating in Serbia. The FAHP is an effective method for mathematical representation of uncertain and imprecise evaluations made by humans, while the TOPSIS method is an efficient way to rank the alternatives. Results show that operating income is of highest importance for estimating employee productivity and decision making, while equity is of the weakest. Furthermore, the most productive operations in large enterprises from selected companies of the sector D-Electrical power supply are found in the company PC EPS Beograd, and the lowest are in the ED Center llc Kragujevac.

Synthetic polymers and methods of making and using the same

Science.gov (United States)

Daily, Michael D.; Grate, Jay W.; Mo, Kai-For

2016-06-14

Monomer embodiments that can be used to make polymers, such as homopolymers, heteropolymers, and that can be used in particular embodiments to make sequence-defined polymers are described. Also described are methods of making polymers using such monomer embodiments. Methods of using the polymers also are described.

Development of fuzzy multi-criteria approach to prioritize locations of treated wastewater use considering climate change scenarios.

Science.gov (United States)

Chung, Eun-Sung; Kim, Yeonjoo

2014-12-15

This study proposed a robust prioritization framework to identify the priorities of treated wastewater (TWW) use locations with consideration of various uncertainties inherent in the climate change scenarios and the decision-making process. First, a fuzzy concept was applied because future forecast precipitation and their hydrological impact analysis results displayed significant variances when considering various climate change scenarios and long periods (e.g., 2010-2099). Second, various multi-criteria decision making (MCDM) techniques including weighted sum method (WSM), Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and fuzzy TOPSIS were introduced to robust prioritization because different MCDM methods use different decision philosophies. Third, decision making method under complete uncertainty (DMCU) including maximin, maximax, minimax regret, Hurwicz, and equal likelihood were used to find robust final rankings. This framework is then applied to a Korean urban watershed. As a result, different rankings were obviously appeared between fuzzy TOPSIS and non-fuzzy MCDMs (e.g., WSM and TOPSIS) because the inter-annual variability in effectiveness was considered only with fuzzy TOPSIS. Then, robust prioritizations were derived based on 18 rankings from nine decadal periods of RCP4.5 and RCP8.5. For more robust rankings, five DMCU approaches using the rankings from fuzzy TOPSIS were derived. This framework combining fuzzy TOPSIS with DMCU approaches can be rendered less controversial among stakeholders under complete uncertainty of changing environments. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of Multi-Criteria Decision Support Methods for Integrated Rehabilitation Prioritization

Directory of Open Access Journals (Sweden)

Franz Tscheikner-Gratl

2017-01-01

Full Text Available The decisions taken in rehabilitation planning for the urban water networks will have a long lasting impact on the functionality and quality of future services provided by urban infrastructure. These decisions can be assisted by different approaches ranging from linear depreciation for estimating the economic value of the network over using a deterioration model to assess the probability of failure or the technical service life to sophisticated multi-criteria decision support systems. Subsequently, the aim of this paper is to compare five available multi-criteria decision-making (MCDM methods (ELECTRE, AHP, WSM, TOPSIS, and PROMETHEE for the application in an integrated rehabilitation management scheme for a real world case study and analyze them with respect to their suitability to be used in integrated asset management of water systems. The results of the different methods are not equal. This occurs because the chosen score scales, weights and the resulting distributions of the scores within the criteria do not have the same impact on all the methods. Independently of the method used, the decision maker must be familiar with its strengths but also weaknesses. Therefore, in some cases, it would be rational to use one of the simplest methods. However, to check for consistency and increase the reliability of the results, the application of several methods is encouraged.

System and method for making quantum dots

KAUST Repository

Bakr, Osman M.

2015-05-28

Embodiments of the present disclosure provide for methods of making quantum dots (QDs) (passivated or unpassivated) using a continuous flow process, systems for making QDs using a continuous flow process, and the like. In one or more embodiments, the QDs produced using embodiments of the present disclosure can be used in solar photovoltaic cells, bio-imaging, IR emitters, or LEDs.

Method of making alkali metal hydrides

Science.gov (United States)

Pecharsky, Vitalij K.; Gupta, Shalabh; Pruski, Marek; Hlova, Ihor; Castle, Andra

2017-05-30

A method is provided for making alkali metal hydrides by mechanochemically reacting alkali metal and hydrogen gas under mild temperature (e.g room temperature) and hydrogen pressure conditions without the need for catalyst, solvent, and intentional heating or cooling.

Determination of the appropriate energy policy for Turkey

International Nuclear Information System (INIS)

Ulutas, B.H.

2005-01-01

Energy is an inevitable necessity for human beings. But the energy source is predicted to be scarce in the coming years as a result of population growth. Therefore people prefer energy sources that are renewable, clean and cost effective. Unfortunately there is not a sole energy source to meet these demands. Determination of the appropriate energy policy problem with interactive criteria and alternatives can be viewed as a multiple criteria decision making (MCDM) problem within the context of the long range and strategic process. The analytic network process (ANO), one of MCDM methods, deals with the dependency and feedback that the problem has. The goal of this paper is to apply the ANP model to evaluate the alternative energy sources for the country. Finally when the results are discussed, it is apparent that the model can produce reasonable and applicable solutions for the case. (author)

INTERIM REPORT IMPROVED METHODS FOR INCORPORATING RISK IN DECISION MAKING

Energy Technology Data Exchange (ETDEWEB)

Clausen, M. J.; Fraley, D. W.; Denning, R. S.

1980-08-01

This paper reports observations and preliminary investigations in the first phase of a research program covering methodologies for making safety-related decisions. The objective has been to gain insight into NRC perceptions of the value of formal decision methods, their possible applications, and how risk is, or may be, incorporated in decision making. The perception of formal decision making techniques, held by various decision makers, and what may be done to improve them, were explored through interviews with NRC staff. An initial survey of decision making methods, an assessment of the applicability of formal methods vis-a-vis the available information, and a review of methods of incorporating risk and uncertainty have also been conducted.

Study of decision framework of offshore wind power station site selection based on ELECTRE-III under intuitionistic fuzzy environment: A case of China

International Nuclear Information System (INIS)

Wu, Yunna; Zhang, Jinying; Yuan, Jianping; Geng, Shuai; Zhang, Haobo

2016-01-01

Highlights: • A novel MCDM framework is applied to assist group decision in OWPS site selection. • The index system consisting of veto and evaluation criteria is constructed. • A case study is carried five sites in coastal areas of Shandong in East China. - Abstract: Offshore wind power projects have been rapidly proposed in China due to policy promotion. Site selection immensely decides the success of any offshore wind power development and is a complex multi-criteria decision making (MCDM) problem. However, canonical MCDM methods tend to fail the site selection process due to the following three problems. Firstly, the compensation problem exists in information processing. Secondly, there exists the problem of incomplete utilization of decision information and information loss in the decision process. Thirdly, the interaction problem in the fuzzy environment is easy to be ignored. To deal with the above problems, this study builds a framework for offshore wind farm site selection decision utilizing Elimination et Choix Traduisant la Realité-III (ELECTRE-III) in the intuitionistic fuzzy environment. First of all, the comprehensive index system of OWPS site selection consisting of veto criteria and evaluation criteria is constructed. Then, the intuitionistic fuzzy set is used in the group decision for the decision makers to express the imperfect knowledge. Moreover, the generalized intuitionistic fuzzy ordered weighted geometric interaction averaging (GIFWGIA) operator is applied to deal with the interaction problem. Together with the likelihood-based valued comparisons, imprecise decision information is reasonably used and information loss problem is rationally avoided. Then a case of China is studied based on the proposed framework, demonstrating the site selection methodology valid and practical. This study implements evaluation method for offshore wind power site selection and also provides a theoretical basis for the development of offshore wind power

Multi-level decision making models, methods and applications

CERN Document Server

Zhang, Guangquan; Gao, Ya

2015-01-01

This monograph presents new developments in multi-level decision-making theory, technique and method in both modeling and solution issues. It especially presents how a decision support system can support managers in reaching a solution to a multi-level decision problem in practice. This monograph combines decision theories, methods, algorithms and applications effectively. It discusses in detail the models and solution algorithms of each issue of bi-level and tri-level decision-making, such as multi-leaders, multi-followers, multi-objectives, rule-set-based, and fuzzy parameters. Potential readers include organizational managers and practicing professionals, who can use the methods and software provided to solve their real decision problems; PhD students and researchers in the areas of bi-level and multi-level decision-making and decision support systems; students at an advanced undergraduate, master’s level in information systems, business administration, or the application of computer science.  

Triptycene-based dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ghanem, Bader; Pinnau, Ingo; Swaidan, Raja

2015-01-01

A triptycene-based monomer, a method of making a triptycene-based monomer, a triptycene-based aromatic polyimide, a method of making a triptycene- based aromatic polyimide, methods of using triptycene-based aromatic polyimides, structures incorporating triptycene-based aromatic polyimides, and methods of gas separation are provided. Embodiments of the triptycene-based monomers and triptycene-based aromatic polyimides have high permeabilities and excellent selectivities. Embodiments of the triptycene-based aromatic polyimides have one or more of the following characteristics: intrinsic microporosity, good thermal stability, and enhanced solubility. In an exemplary embodiment, the triptycene-based aromatic polyimides are microporous and have a high BET surface area. In an exemplary embodiment, the triptycene-based aromatic polyimides can be used to form a gas separation membrane.

Triptycene-based dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ghanem, Bader

2015-12-30

A triptycene-based monomer, a method of making a triptycene-based monomer, a triptycene-based aromatic polyimide, a method of making a triptycene- based aromatic polyimide, methods of using triptycene-based aromatic polyimides, structures incorporating triptycene-based aromatic polyimides, and methods of gas separation are provided. Embodiments of the triptycene-based monomers and triptycene-based aromatic polyimides have high permeabilities and excellent selectivities. Embodiments of the triptycene-based aromatic polyimides have one or more of the following characteristics: intrinsic microporosity, good thermal stability, and enhanced solubility. In an exemplary embodiment, the triptycene-based aromatic polyimides are microporous and have a high BET surface area. In an exemplary embodiment, the triptycene-based aromatic polyimides can be used to form a gas separation membrane.

Assessment of regions priority for implementation of solar projects in Iran: New application of a hybrid multi-criteria decision making approach

International Nuclear Information System (INIS)

Vafaeipour, Majid; Hashemkhani Zolfani, Sarfaraz; Morshed Varzandeh, Mohammad Hossein; Derakhti, Arman; Keshavarz Eshkalag, Mahsa

2014-01-01

Highlights: • The economic, environmental, technical, social and risk criteria are considered. • Prioritization of regions for construction of solar power plants in Iran is assessed. • A hybrid MCDM approach ranked 25 scattered cities all around the country. • SWARA ranked the identified criteria, and WASPAS prioritized the alternatives. • Considering the ranked cities, a comprehensive GIS map of the country is provided. - Abstract: One of the promising ways to shift towards sustainable development has been the utilization of solar energy worldwide. Based on its geographical specifications, Iran enjoys high solar potential to implement feasible solar energy projects. However, to obtain the best productivity and payback, identification and prioritization of suitable regions for construction of expensive solar power plants is a delicate issue. In contrast with common assumptions, identifying appropriate geographical regions for implementation of such projects is not only associated with the amount of received solar radiation, but also there are many economic, environmental, technical, social and risk criteria (and their relevant sub-criteria) which must be taken into account. To address the complicated nature of the prioritization challenge caused by existence of various indicators, this paper applies a hybrid Multi-Criteria Decision Making (MCDM) approach and prioritizes 25 scattered cities all around the country for implementation of future solar power plants. For this, both quantitative and qualitative effective indicators are identified to be considered as the inputs to the utilized hybrid model. The Step-wise Weight Assessment Ratio Analysis (SWARA, proposed in 2010) method is employed to rank the identified criteria, and the Weighted Aggregates Sum Product Assessment (WASPAS, proposed in 2012) is applied to evaluate and prioritize the alternatives (cities) where Yazd city ranked first. Eventually via considering the ranked cities, a comprehensive GIS

Mixing Methods in Assessing Coaches' Decision Making

Science.gov (United States)

Vergeer, Ineke; Lyle, John

2007-01-01

Mixing methods has recently achieved respectability as an appropriate approach to research design, offering a variety of advantages (Tashakkori & Teddlie, 2003). The purpose of this paper is to outline and evaluate a mixed methods approach within the domain of coaches' decision making. Illustrated with data from a policy-capturing study on…

On-chip graphene electrode, methods of making, and methods of use

KAUST Repository

Nayak, Pranati

2018-01-25

Embodiments of the present disclosure provide a device including an on-chip electrode platform including one or more three dimensional laser scribed graphene electrodes, methods of making the on-chip electrode platform, methods of analyzing (e.g., detecting, quantifying, and the like) chemicals and biochemicals, and the like.

Interval-Valued Neutrosophic Bonferroni Mean Operators and the Application in the Selection of Renewable Energy

OpenAIRE

Pu Ji; Peng-fei Cheng; Hong-yu Zhang; Jian-qiang Wang

2018-01-01

Renewable energy selection, which is a multi-criteria decision-making (MCDM) problem, is crucial for the sustainable development of economy. Criteria are interdependent in the selection problem of renewable energy.

Grey situation group decision-making method based on prospect theory.

Science.gov (United States)

Zhang, Na; Fang, Zhigeng; Liu, Xiaqing

2014-01-01

This paper puts forward a grey situation group decision-making method on the basis of prospect theory, in view of the grey situation group decision-making problems that decisions are often made by multiple decision experts and those experts have risk preferences. The method takes the positive and negative ideal situation distance as reference points, defines positive and negative prospect value function, and introduces decision experts' risk preference into grey situation decision-making to make the final decision be more in line with decision experts' psychological behavior. Based on TOPSIS method, this paper determines the weight of each decision expert, sets up comprehensive prospect value matrix for decision experts' evaluation, and finally determines the optimal situation. At last, this paper verifies the effectiveness and feasibility of the method by means of a specific example.

Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus.

Science.gov (United States)

Rousis, K; Moustakas, K; Malamis, S; Papadopoulos, A; Loizidou, M

2008-01-01

Waste from electrical and electronic equipment (WEEE) constitutes one of the most complicated solid waste streams in terms of its composition, and, as a result, it is difficult to be effectively managed. In view of the environmental problems derived from WEEE management, many countries have established national legislation to improve the reuse, recycling and other forms of recovery of this waste stream so as to apply suitable management schemes. In this work, alternative systems are examined for the WEEE management in Cyprus. These systems are evaluated by developing and applying the Multi-Criteria Decision Making (MCDM) method PROMETHEE. In particular, through this MCDM method, 12 alternative management systems were compared and ranked according to their performance and efficiency. The obtained results show that the management schemes/systems based on partial disassembly are the most suitable for implementation in Cyprus. More specifically, the optimum scenario/system that can be implemented in Cyprus is that of partial disassembly and forwarding of recyclable materials to the native existing market and disposal of the residues at landfill sites.

Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus

International Nuclear Information System (INIS)

Rousis, K.; Moustakas, K.; Malamis, S.; Papadopoulos, A.; Loizidou, M.

2008-01-01

Waste from electrical and electronic equipment (WEEE) constitutes one of the most complicated solid waste streams in terms of its composition, and, as a result, it is difficult to be effectively managed. In view of the environmental problems derived from WEEE management, many countries have established national legislation to improve the reuse, recycling and other forms of recovery of this waste stream so as to apply suitable management schemes. In this work, alternative systems are examined for the WEEE management in Cyprus. These systems are evaluated by developing and applying the Multi-Criteria Decision Making (MCDM) method PROMETHEE. In particular, through this MCDM method, 12 alternative management systems were compared and ranked according to their performance and efficiency. The obtained results show that the management schemes/systems based on partial disassembly are the most suitable for implementation in Cyprus. More specifically, the optimum scenario/system that can be implemented in Cyprus is that of partial disassembly and forwarding of recyclable materials to the native existing market and disposal of the residues at landfill sites

Multi-Criteria selection of technology for processing ore raw materials

Science.gov (United States)

Gorbatova, E. A.; Emelianenko, E. A.; Zaretckii, M. V.

2017-10-01

The development of Computer-Aided Process Planning (CAPP) for the Ore Beneficiation process is considered. The set of parameters to define the quality of the Ore Beneficiation process is identified. The ontological model of CAPP for the Ore Beneficiation process is described. The hybrid choice method of the most appropriate variant of the Ore Beneficiation process based on the Logical Conclusion Rules and the Fuzzy Multi-Criteria Decision Making (MCDM) approach is proposed.

Form of silicon and method of making the same

Science.gov (United States)

Strobel, Timothy A.; Kim, Duck Young; Kurakevych, Oleksandr O.

2017-07-04

The invention relates to a new phase of silicon, Si.sub.24, and a method of making the same. Si.sub.24 has a quasi-direct band gap, with a direct gap value of 1.34 eV and an indirect gap value of 1.3 eV. The invention also relates to a compound of the formula Na.sub.4Si.sub.24 and a method of making the same. N.sub.a4Si.sub.24 may be used as a precursor to make Si.sub.24.

Evaluation of Wheel Loaders in Open Pit Marble Quarrying by Using the AHP and Topsis Approaches / Ocena pracy ładowarki na podwoziu kołowym w odkrywkowej kopalni marmuru w oparciu o metody AHP i topsis

Science.gov (United States)

Kun, Mete; Topaloǧlu, Şeyda; Malli, Tahir

2013-03-01

The marble mining in Turkey has been rising since the early 80's. In relation to that, the marble income has become noticeably bigger than those of other mining sectors. In recent years, marble and natural stone export composes half of the total mine export with a value of two billion dollars. This rapid development observed in marble operation has increased the importance of mining economics, income-expenditure balance and cost analysis. The most important cost elements observed in marble quarrying are machinery and equipment, labor costs and geological structures of the field. The aim of this study is to is to propose a multi-criteria decision making (MCDM) approach to evaluate the wheel loader alternatives and select the best loader under multiple criteria. A two-step methodology based on two MCDM methods, which are namely the Analytic Hierarchy Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), are used in the evaluation procedure. More precisely, AHP is applied to determine the relative weights of evaluation criteria and TOPSIS is applied to rank the wheel loader alternatives. The proposed approach also provides a relatively simple and very well suited decision making tool for this type of decision making problems.

Bi-metallic catalysts, methods of making, and uses thereof

KAUST Repository

Basset, Jean-Marie

2017-01-19

Provided herein are bi-metallic catalysts, methods of making, and uses thereof. In some embodiments, the bi-metallic catalyst contains two different metal catalysts that can be used in hydrocarbon metathesis reactions, in some embodiments, the methods of making the bi-metallic catalysts can include two steps utilizing a surface organometallic chemistry approach in which the two different metal catalysts are sequentially grafted onto a support.

Bi-metallic catalysts, methods of making, and uses thereof

KAUST Repository

Basset, Jean-Marie; Samantaray, Manoja K.; Dey, Raju; Abou-Hamad, Edy; Kavitake, Santosh

2017-01-01

Provided herein are bi-metallic catalysts, methods of making, and uses thereof. In some embodiments, the bi-metallic catalyst contains two different metal catalysts that can be used in hydrocarbon metathesis reactions, in some embodiments, the methods of making the bi-metallic catalysts can include two steps utilizing a surface organometallic chemistry approach in which the two different metal catalysts are sequentially grafted onto a support.

The Selection of Dry Port Location by a Hybrid CFA-MACBETH-PROMETHEE Method: A Case Study of Southern Thailand

Directory of Open Access Journals (Sweden)

Kraisee Komchornrit

2017-09-01

Full Text Available An intermodal transport could be the potential solution for reduction of logistics cost, including an acceleration of product flow, by way of dry port, where is regarded as a key component of combined transport. To promote a dry port in southern Thailand, the aim of this study is to propose an integrated method based on multi-criteria decision making (MCDM for selecting its best location. Thus, a new hybrid CFA-MACBETH-PROMETHEE model is presented. Confirmatory factor analysis (CFA is applied to determine loads for sorting out the importance of criteria and also investigate the relationship of logistic policy and geographical determination of dry port establishment. Later, measuring attractiveness by a categorical based evaluation technique (MACBETH is utilized to build weights of those criteria. Eventually, preference ranking organization method for enrichment of evaluations (PROMETHEE is engaged to rank from the most to least attractive alternatives of dry port. In this study, results indicate that Phatthalung railway station is the most attractive location for being a new dry port.

The Delphi Method And Decision Making

OpenAIRE

Villagrasa, Raimundo

2015-01-01

Se describe, analisa y critica el método Delphi, desarrollado para encontrar una opinión grupal para tomar decisiones de manera eficiente en una empresa. The article describes, analyzes and criticizes the Delphi method, developed to find a group opinion to make decisions in an efficient way in a firm.

A Grey Fuzzy Logic Approach for Cotton Fibre Selection

Science.gov (United States)

Chakraborty, Shankar; Das, Partha Protim; Kumar, Vidyapati

2017-06-01

It is a well known fact that the quality of ring spun yarn predominantly depends on various physical properties of cotton fibre. Any variation in these fibre properties may affect the strength and unevenness of the final yarn. Thus, so as to achieve the desired yarn quality and characteristics, it becomes imperative for the spinning industry personnel to identify the most suitable cotton fibre from a set of feasible alternatives in presence of several conflicting properties/attributes. This cotton fibre selection process can be modelled as a Multi-Criteria Decision Making (MCDM) problem. In this paper, a grey fuzzy logic-based approach is proposed for selection of the most apposite cotton fibre from 17 alternatives evaluated based on six important fibre properties. It is observed that the preference order of the top-ranked cotton fibres derived using the grey fuzzy logic approach closely matches with that attained by the past researchers which proves the application potentiality of this method in solving varying MCDM problems in textile industries.

Cloud decision model for selecting sustainable energy crop based on linguistic intuitionistic information

Science.gov (United States)

Peng, Hong-Gang; Wang, Jian-Qiang

2017-11-01

In recent years, sustainable energy crop has become an important energy development strategy topic in many countries. Selecting the most sustainable energy crop is a significant problem that must be addressed during any biofuel production process. The focus of this study is the development of an innovative multi-criteria decision-making (MCDM) method to handle sustainable energy crop selection problems. Given that various uncertain data are encountered in the evaluation of sustainable energy crops, linguistic intuitionistic fuzzy numbers (LIFNs) are introduced to present the information necessary to the evaluation process. Processing qualitative concepts requires the effective support of reliable tools; then, a cloud model can be used to deal with linguistic intuitionistic information. First, LIFNs are converted and a novel concept of linguistic intuitionistic cloud (LIC) is proposed. The operations, score function and similarity measurement of the LICs are defined. Subsequently, the linguistic intuitionistic cloud density-prioritised weighted Heronian mean operator is developed, which served as the basis for the construction of an applicable MCDM model for sustainable energy crop selection. Finally, an illustrative example is provided to demonstrate the proposed method, and its feasibility and validity are further verified by comparing it with other existing methods.

A fuzzy hybrid approach for project manager selection

Directory of Open Access Journals (Sweden)

Ahmad Jafarnejad Chaghooshi

2016-09-01

Full Text Available Suitable project manager has a significant impact on successful accomplishment of the project. Managers should possess such skills in order to effectively cope with the competition. In this respect, selecting managers based on their skills can lead to a competitive advantage towards the achievement of organizational goals. selection of the suitable project manager can be viewed as a multi-criteria decision making (MCDM problem and an extensive evaluation of criteria, such as Technical skills, experience skills, Personal qualities and the related criteria must be considered in the selection process of project manager. The fuzzy set theory and MCDM methods appears as an essential tools to provide a decision framework that incorporates imprecise judgments and multi criteria nature of project manager selection process inherent in this process. This paper proposes the joint use of the Fuzzy DEMATEL (FDEMATEL and Fuzzy VIKOR methods for the decision-making process of selecting the most suitable managers for projects. First, with the opinions of the senior managers based on project management competency model (ICB-IPMA, all the criteria required for the selection are gathered. Then the FDEMATEL method is used to prioritize the importance of various criteria and FVIKOR used to rank the alternatives in a preferred order to select the best project managers from a number of alternatives. Next, a real case study used to illustrate the process of the proposed method. Finally, some conclusions are discussed at the end of this study.

Individual feature identification method for nuclear accident emergency decision-making

International Nuclear Information System (INIS)

Chen Yingfeng; Wang Jianlong; Lin Xiaoling; Yang Yongxin; Lu Xincheng

2014-01-01

According to the individual feature identification method and combining with the characteristics of nuclear accident emergency decision-making, the evaluation index system of the nuclear accident emergency decision-making was determined on the basis of investigation and analysis. The effectiveness of the nuclear accident emergency decision-making was evaluated based on the individual standards by solving the individual features of the individual standard identification decisions. The case study shows that the optimization result is reasonable, objective and reliable, and it can provide an effective analysis method and decision-making support for optimization of nuclear accident emergency protective measures. (authors)

Managing industrial risk--having a tested and proven system to prevent and assess risk.

Science.gov (United States)

Heller, Stephen

2006-03-17

Some relatively easy techniques exist to improve the risk picture/profile to aid in preventing losses. Today with the advent of computer system resources, focusing on specific aspects of risk through systematic scoring and comparison, the risk analysis can be relatively easy to achieve. Techniques like these demonstrate how working experience and common sense can be combined mathematically into a flexible risk management tool or risk model for analyzing risk. The risk assessment methodology provided by companies today is no longer the ideas and practices of one group or even one company. It is reflective of the practice of many companies, as well as the ideas and expertise of academia and government regulators. The use of multi-criteria decision making (MCDM) techniques for making critical decisions has been recognized for many years for a variety of purposes. In today's computer age, the easy accessing and user-friendly nature for using these techniques, makes them a favorable choice for use in the risk assessment environment. The new user of these methodologies should find many ideas directly applicable to his or her needs when approaching risk decision making. The user should find their ideas readily adapted, with slight modification, to accurately reflect a specific situation using MCDM techniques. This makes them an attractive feature for use in assessment and risk modeling. The main advantage of decision making techniques, such as MCDM, is that in the early stages of a risk assessment, accurate data on industrial risk, and failures are lacking. In most cases, it is still insufficient to perform a thorough risk assessment using purely statistical concepts. The practical advantages towards deviating from strict data-driven protocol seem to outweigh the drawbacks. Industry failure data often comes at a high cost when a loss occurs. We can benefit from this unfortunate acquisition of data through the continuous refining of our decisions by incorporating this new

Applying Multi-Criteria Decision-Making Techniques to Prioritize Agility Drivers

OpenAIRE

Ahmad Jafarnejad; Sayyed Mohammad Reza Davoodi; Abolfazl Sherafat

2013-01-01

It seems that to recognize and classify the factors affecting organizational agility and need to specify the amount of their importance for the organization is essential to preserve survival and success in today's environment. This paper reviews the concept of agility and its division in the following indicators included the factors of motivations organizational agility that have been ranked in terms of level of importance and their influence by the techniques of MCDM. The inner complexity, s...

A spectroscopic study of mechanochemically activated kaolinite with the aid of chemometrics.

Science.gov (United States)

Carmody, Onuma; Kristóf, János; Frost, Ray L; Makó, Eva; Kloprogge, J Theo; Kokot, Serge

2005-07-01

The study of kaolinite surfaces is of industrial importance. In this work we report the application of chemometrics to the study of modified kaolinite surfaces. DRIFT spectra of mechanochemically activated kaolinites (Kiralyhegy, Zettlitz, Szeg, and Birdwood) were analyzed using principal component analysis (PCA) and multicriteria decision making (MCDM) methods, PROMETHEE and GAIA. The clear discrimination of the Kiralyhegy spectral objects on the two PC scores plots (400-800 and 800-2030 cm(-1)) indicated the dominance of quartz. Importantly, no ordering of any spectral objects appeared to be related to grinding time in the PC plots of these spectral regions. Thus, neither the kaolinite nor the quartz, are systematically responsive to grinding time according to the spectral criteria investigated. The third spectral region (2600-3800 cm(-1)OH vibrations), showed apparent systematic ordering of the Kiralyhegy and, to a lesser extent, Zettlitz spectral objects with grinding time. This was attributed to the effect of the natural quartz on the delamination of kaolinite and the accompanying phenomena (i.e., formation of kaolinite spheres and water). With the MCDM methods, it was shown that useful information on the basis of chemical composition, physical properties and grinding time can be obtained. For example, the effects of the minor chemical components (e.g., MgO, K(2)O, etc.) indicated that the Birdwood kaolinite is arguably the most pure one analyzed. In another MCDM experiment, some support was obtained for the apparent trend with grinding time noted in the PC plot of the OH spectral region.

Article and method for making an article

Science.gov (United States)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

2018-04-03

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of providing a metal alloy powder; forming an initial layer with the metal alloy powder, the initial layer having a preselected thickness and a preselected shape, the preselected shape including at least one aperture; sequentially forming an additional layer over the initial layer with the metal alloy powder, the additional layer having a second preselected thickness and a second preselected shape, the second preselected shape including at least one aperture corresponding to the at least one aperture in the initial layer; and joining the additional layer to the initial layer, forming a structure having a predetermined thickness, a predetermined shape, and at least one aperture having a predetermined profile. The structure is attached to a substrate to make the article.

Composite material and method of making

Science.gov (United States)

Fryxell, Glen E.; Samuels, William D.; Simmons, Kevin L.

2004-04-20

The composite material and methods of making the present invention rely upon a fully dense monolayer of molecules attached to an oxygenated surface at one end, and an organic terminal group at the other end, which is in turn bonded to a polymer. Thus, the composite material is a second material chemically bonded to a polymer with fully dense monolayer there between.

Maintenance planning support method for nuclear power plants based on collective decision making

International Nuclear Information System (INIS)

Shimizu, Shunichi; Sakurai, Shoji; Takaoka, Kazushi; Kanemoto, Shigeru; Fukutomi, Shigeki

1992-01-01

Inspection and maintenance planning in nuclear power plants is conducted by decision making based on experts' collective consensus. However, since a great deal of time and effort is required to reach a consensus among expert judgments, the establishment of effective decision making methods is necessary. Therefore, the authors developed a method for supporting collective decision making, based on a combination of three types of decision making methods; the Characteristic Diagram method, Interpretative Structural Modeling method, and the Analytic Hierarchy Process method. The proposed method enables us to determine the evaluation criteria systematically for collective decision making, and also allows extracting collective decisions using simplified questionnaires. The proposed method can support reaching a consensus of groups effectively through the evaluation of collective decision structural models and their characteristics. In this paper, the effectiveness of the proposed method was demonstrated through its application to the decision making problem concerning whether or not the improved ultrasonic testing equipment should be adopted at nuclear power plants. (author)

Comparison of multiple-criteria decision-making methods - results of simulation study

Directory of Open Access Journals (Sweden)

Michał Adamczak

2016-12-01

Full Text Available Background: Today, both researchers and practitioners have many methods for supporting the decision-making process. Due to the conditions in which supply chains function, the most interesting are multi-criteria methods. The use of sophisticated methods for supporting decisions requires the parameterization and execution of calculations that are often complex. So is it efficient to use sophisticated methods? Methods: The authors of the publication compared two popular multi-criteria decision-making methods: the  Weighted Sum Model (WSM and the Analytic Hierarchy Process (AHP. A simulation study reflects these two decision-making methods. Input data for this study was a set of criteria weights and the value of each in terms of each criterion. Results: The iGrafx Process for Six Sigma simulation software recreated how both multiple-criteria decision-making methods (WSM and AHP function. The result of the simulation was a numerical value defining the preference of each of the alternatives according to the WSM and AHP methods. The alternative producing a result of higher numerical value  was considered preferred, according to the selected method. In the analysis of the results, the relationship between the values of the parameters and the difference in the results presented by both methods was investigated. Statistical methods, including hypothesis testing, were used for this purpose. Conclusions: The simulation study findings prove that the results obtained with the use of two multiple-criteria decision-making methods are very similar. Differences occurred more frequently in lower-value parameters from the "value of each alternative" group and higher-value parameters from the "weight of criteria" group.

Article and method for making an article

Energy Technology Data Exchange (ETDEWEB)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

2018-04-03

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of depositing a metal alloy powder to form an initial layer including at least one aperture, melting the metal alloy powder with a focused energy source to transform the powder layer to a sheet of metal alloy, sequentially depositing an additional layer of the metal alloy powder to form a layer including at least one aperture corresponding to the at least one aperture in the initial layer, melting the additional layer of the metal alloy powder with the focused energy source to increase the sheet thickness, and repeating the steps of sequentially depositing and melting the additional layers of metal alloy powder until a structure including at least one aperture having a predetermined profile is obtained. The structure is attached to a substrate to make the article.

Nanotube structures, methods of making nanotube structures, and methods of accessing intracellular space

Science.gov (United States)

VanDersarl, Jules J.; Xu, Alexander M.; Melosh, Nicholas A.; Tayebi, Noureddine

2016-02-23

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure, in one aspect, relate to methods of making a structure including nanotubes, a structure including nanotubes, methods of delivering a fluid to a cell, methods of removing a fluid to a cell, methods of accessing intracellular space, and the like.

Method of making sulfur-resistant composite metal membranes

Science.gov (United States)

Way, J Douglas [Boulder, CO; Lusk, Mark [Golden, CO; Thoen, Paul [Littleton, CO

2012-01-24

The invention provides thin, hydrogen-permeable, sulfur-resistant membranes formed from palladium or palladium-alloy coatings on porous, ceramic or metal supports. Also disclosed are methods of making these membranes via sequential electroless plating techniques, wherein the method of making the membrane includes decomposing any organic ligands present on the substrate, reducing the palladium crystallites on the substrate to reduced palladium crystallites, depositing a film of palladium metal on the substrate and then depositing a second, gold film on the palladium film. These two metal films are then annealed at a temperature between about 200.degree. C. and about 1200.degree. C. to form a sulfur-resistant, composite PdAu alloy membrane.

Polyimide, dianhydride monomers, and polymers, methods of making and uses thereof

KAUST Repository

Pinnau, Ingo; Ghanem, Bader Saleh; Abdulhamid, Mahmoud Atef

2017-01-01

Embodiments of the present disclosure include, a dianhydride monomer, a polyimide, a method of making a dianhydride, a method of making a polyimide, and the like. Embodiments of the present disclosure can be used in membrane-based gas separation applications.

Polyimide, dianhydride monomers, and polymers, methods of making and uses thereof

KAUST Repository

Pinnau, Ingo

2017-11-16

Embodiments of the present disclosure include, a dianhydride monomer, a polyimide, a method of making a dianhydride, a method of making a polyimide, and the like. Embodiments of the present disclosure can be used in membrane-based gas separation applications.

Housing decision making methods for initiation development phase process

Science.gov (United States)

Zainal, Rozlin; Kasim, Narimah; Sarpin, Norliana; Wee, Seow Ta; Shamsudin, Zarina

2017-10-01

Late delivery and sick housing project problems were attributed to poor decision making. These problems are the string of housing developer that prefers to create their own approach based on their experiences and expertise with the simplest approach by just applying the obtainable standards and rules in decision making. This paper seeks to identify the decision making methods for housing development at the initiation phase in Malaysia. The research involved Delphi method by using questionnaire survey which involved 50 numbers of developers as samples for the primary stage of collect data. However, only 34 developers contributed to the second stage of the information gathering process. At the last stage, only 12 developers were left for the final data collection process. Finding affirms that Malaysian developers prefer to make their investment decisions based on simple interpolation of historical data and using simple statistical or mathematical techniques in producing the required reports. It was suggested that they seemed to skip several important decision-making functions at the primary development stage. These shortcomings were mainly due to time and financial constraints and the lack of statistical or mathematical expertise among the professional and management groups in the developer organisations.

Application of interval 2-tuple linguistic MULTIMOORA method for health-care waste treatment technology evaluation and selection.

Science.gov (United States)

Liu, Hu-Chen; You, Jian-Xin; Lu, Chao; Shan, Meng-Meng

2014-11-01

The management of health-care waste (HCW) is a major challenge for municipalities, particularly in the cities of developing countries. Selection of the best treatment technology for HCW can be viewed as a complicated multi-criteria decision making (MCDM) problem which requires consideration of a number of alternatives and conflicting evaluation criteria. Additionally, decision makers often use different linguistic term sets to express their assessments because of their different backgrounds and preferences, some of which may be imprecise, uncertain and incomplete. In response, this paper proposes a modified MULTIMOORA method based on interval 2-tuple linguistic variables (named ITL-MULTIMOORA) for evaluating and selecting HCW treatment technologies. In particular, both subjective and objective importance coefficients of criteria are taken into consideration in the developed approach in order to conduct a more effective analysis. Finally, an empirical case study in Shanghai, the most crowded metropolis of China, is presented to demonstrate the proposed method, and results show that the proposed ITL-MULTIMOORA can solve the HCW treatment technology selection problem effectively under uncertain and incomplete information environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Introducing a method for Health, Safety and Environmental (HSE risk assessment, using multi-criteria decision making (MCDM techniques: a case study in power plant construction

Directory of Open Access Journals (Sweden)

A. Fazlollah

2014-05-01

Conclusion: The suggested ANP model could provide a more accurate prioritization for hazards in comparison with current methods because of considering five qualitative indices. This allows an optimal allocation of organizational resources for controlling hazards.

Sistem Pendukung Keputusan Pengalokasian Spare Part

Directory of Open Access Journals (Sweden)

Rita Wiryasaputra

2013-01-01

objectives can be solved by goal programming. Research of spare part allocation focuses on an individual decision maker and presents the solving problem with Multiple Criteria Decision Making (MCDM. A lot of MCDM approaches have been developed and applied to diverse fields, like engineering, management, economic, etc. As one of the known classical MCDM approaches, TOPSIS method is known to be a common method to get the preliminary outcome.  The main concept of TOPSIS is the best alternative has the shortest distance from the positive ideal solution and has the longest distance from the negative ideal solution.  Before the stores are ranked with TOPIS method, the management assigned a weightage to each store using Entropy method.   Keywords— Decision Support Model, Entropy, TOPSIS, Goal Programming.

Ordering alternatives in MCDM problems

International Nuclear Information System (INIS)

De Baets, B.

1994-01-01

A new approach to the study of a set of alternatives in a multi-criteria decision making problem is presented. Alternatives are described by means of fuzzy sets in the set of criteria, expressing the degrees to which they fulfill the different criteria. The concept of a fuzzy inclusion is introduced and is discussed from an axiomatic point of view. To each implication operator corresponds a fuzzy inclusion. The fuzzy inclusion corresponding to the Goedel operator is used to measure the degree to which the scores of one alternative are contained in the scores of another one. Repeating this for all couples of alternatives yields a fuzzy quasi-order relation in a set of alternatives. The cuts of this fuzzy relation are then classical quasi-order relations: they express orderings of the alternatives, allowing alternatives to be indifferent or incomparable, corresponding to different degrees of confidence

Base oils and methods for making the same

Science.gov (United States)

Ohler, Nicholas; Fisher, Karl; Tirmizi, Shakeel

2018-01-09

Provided herein are isoparaffins derived from hydrocarbon terpenes such as myrcene, ocimene and farnesene, and methods for making the same. In certain variations, the isoparaffins have utility as lubricant base stocks.

Tape-cast sensors and method of making

Science.gov (United States)

Mukundan, Rangachary [Santa Fe, NM; Brosha, Eric L [Los Alamos, NM; Garzon, Fernando H [Santa Fe, NM

2009-08-18

A method of making electrochemical sensors in which an electrolyte material is cast into a tape. Prefabricated electrodes are then partially embedded between two wet layers of the electrolyte tape to form a green sensor, and the green sensor is then heated to sinter the electrolyte tape around the electrodes. The resulting sensors can be used in applications such as, but not limited to, combustion control, environmental monitoring, and explosive detection. A electrochemical sensor formed by the tape-casting method is also disclosed.

Methods for making lithium vanadium oxide electrode materials

Science.gov (United States)

Schutts, Scott M.; Kinney, Robert J.

2000-01-01

A method of making vanadium oxide formulations is presented. In one method of preparing lithium vanadium oxide for use as an electrode material, the method involves: admixing a particulate form of a lithium compound and a particulate form of a vanadium compound; jet milling the particulate admixture of the lithium and vanadium compounds; and heating the jet milled particulate admixture at a temperature below the melting temperature of the admixture to form lithium vanadium oxide.

Sustainable material selection for construction industry

DEFF Research Database (Denmark)

Govindan, Kannan; Shankar, Madan; Kannan, Devika

2016-01-01

a hybrid multi criteria decision making (MCDM) methodology with a specific examination of the UAE. The indicators collected from existing literatures were used in evaluation of sustainable construction materials with the assistance of construction sector-based respondents. The proposed framework...

Implementation of preference ranking organization method for enrichment evaluation (Promethee) on selection system of student’s achievement

Science.gov (United States)

Karlitasari, L.; Suhartini, D.; Nurrosikawati, L.

2018-03-01

Selection of Student Achievement is conducted every year, starting from the level of Study Program, Faculty, to University, which then rank one will be sent to Kopertis level. The criteria made for the selection are Academic and Rich Scientific, Organizational, Personality, and English. In order for the selection of Student Achievement is Objective, then in addition to the presence of the jury is expected to use methods that support the decision to be more optimal in determining the Student Achievement. One method used is the Promethee Method. Preference Ranking Organization Method for Enrichment Evaluation (Promethee) is a method of ranking in Multi Criteria Decision Making (MCDM). PROMETHEE has the advantage that there is a preference type against the criteria that can take into account alternatives with other alternatives on the same criteria. The conjecture of alternate dominance over a criterion used in PROMETHEE is the use of values in the relationships between alternative ranking values. Based on the calculation result, from 7 applicants between Manual and Promethee Matrices, rank 1, 2, and 3, did not change, only 4 to 7 positions were changed. However, after the sensitivity test, almost all criteria experience a high level of sensitivity. Although it does not affect the students who will be sent to the next level, but can bring psychological impact on prospective student’s achievement

Micropores and methods of making and using thereof

Science.gov (United States)

Perroud, Thomas D.; Patel, Kamlesh D.; Meagher, Robert J.

2016-08-02

Disclosed herein are methods of making micropores of a desired height and/or width between two isotropic wet etched features in a substrate which comprises single-level isotropic wet etching the two features using an etchant and a mask distance that is less than 2.times. a set etch depth. Also disclosed herein are methods using the micropores and microfluidic devices comprising the micropores.

EVALUATION AND RANKING OF ARTIFICIAL HIP PROSTHESIS SUPPLIERS BY USING A FUZZY TOPSIS METHODOLOGY

Directory of Open Access Journals (Sweden)

Marija Zahar Djordjevic

2014-06-01

Full Text Available The aim of this study is to propose a fuzzy multi-criteria decision-making approach (MCDM to evaluate the artificial hip prosthesis suppliers with respect to numerous criteria, simultaneously, taking into account the type of each criteria and its relative importance. The fuzzy of the Technique for Order Preference by Similarity to Ideal Solution (FTOSISis applied in order to rank the artificial hip prosthesis suppliers. The rank is obtained using the process of fuzzy number comparison. Software solution based on suggested method is also presented. A real-life example with real data is presented to clarify the proposed method.

Measuring relative performance of banking industry using a DEA and TOPSIS

Directory of Open Access Journals (Sweden)

Mohammad Hemmati

2013-02-01

Full Text Available One of the primary concerns in banking industry is to measure the relative importance of banking industry using popular multi criteria decision making (MCDM techniques such as data envelopment analysis (DEA and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS. In this paper, we use these two MCDM techniques to measure the relative efficiencies of 16 private and governmental banks in terms of electronic payment. There are three inputs with DEA methods including the number of issued cards, the number of ATM machines and the number of POSs and there are two outputs including the number of successful ATMs and the number of successful POSs transactions. The proposed study of this paper uses the necessary data of one of Iranian provinces and the results of the implementation of DEA and TOPSIS have indicated that 9 out of 16 banks were efficient. Our study also indicates that mean of relative efficiency for private banks was 82% while this number was 75% for governmental banks.

Fuzzy multiple objective decision making methods and applications

CERN Document Server

Lai, Young-Jou

1994-01-01

In the last 25 years, the fuzzy set theory has been applied in many disciplines such as operations research, management science, control theory, artificial intelligence/expert system, etc. In this volume, methods and applications of crisp, fuzzy and possibilistic multiple objective decision making are first systematically and thoroughly reviewed and classified. This state-of-the-art survey provides readers with a capsule look into the existing methods, and their characteristics and applicability to analysis of fuzzy and possibilistic programming problems. To realize practical fuzzy modelling, it presents solutions for real-world problems including production/manufacturing, location, logistics, environment management, banking/finance, personnel, marketing, accounting, agriculture economics and data analysis. This book is a guided tour through the literature in the rapidly growing fields of operations research and decision making and includes the most up-to-date bibliographical listing of literature on the topi...

Membrane for distillation including nanostructures, methods of making membranes, and methods of desalination and separation

KAUST Repository

Lai, Zhiping; Huang, Kuo-Wei; Chen, Wei

2016-01-01

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure provide membranes, methods of making the membrane, systems including the membrane, methods of separation, methods of desalination, and the like.

Membrane for distillation including nanostructures, methods of making membranes, and methods of desalination and separation

KAUST Repository

Lai, Zhiping

2016-01-21

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure provide membranes, methods of making the membrane, systems including the membrane, methods of separation, methods of desalination, and the like.

Polystyrene-b-polyethylene oxide block copolymer membranes, methods of making, and methods of use

KAUST Repository

Peinemann, Klaus-Viktor; Karunakaran, Madhavan

2015-01-01

Embodiments of the present disclosure provide for polystyrene-b-polyethylene oxide (PS-b-PEO) block copolymer nanoporous membranes, methods of making a PS-b-PEO block copolymer nanoporous membrane, methods of using PS-b-PEO block copolymer nanoporous membranes, and the like.

Polystyrene-b-polyethylene oxide block copolymer membranes, methods of making, and methods of use

KAUST Repository

Peinemann, Klaus-Viktor

2015-04-16

Embodiments of the present disclosure provide for polystyrene-b-polyethylene oxide (PS-b-PEO) block copolymer nanoporous membranes, methods of making a PS-b-PEO block copolymer nanoporous membrane, methods of using PS-b-PEO block copolymer nanoporous membranes, and the like.

Developing a Green Supplier Selection Model by Using the DANP with VIKOR

Directory of Open Access Journals (Sweden)

Tsai Chi Kuo

2015-02-01

Full Text Available This study proposes a novel hybrid multiple-criteria decision-making (MCDM method to evaluate green suppliers in an electronics company. Seventeen criteria in two dimensions concerning environmental and management systems were identified under the Code of Conduct of the Electronic Industry Citizenship Coalition (EICC. Following this, the Decision-Making Trial and Evaluation Laboratory (DEMATEL used the Analytic Network Process (ANP method (known as DANP to determine both the importance of evaluation criteria in selecting suppliers and the causal relationships between them. Finally, the VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR method was used to evaluate the environmental performances of suppliers and to obtain a solution under each evaluation criterion. An illustrative example of an electronics company was presented to demonstrate how to select green suppliers.

Advanced method for making vitreous waste forms

International Nuclear Information System (INIS)

Pope, J.M.; Harrison, D.E.

1980-01-01

A process is described for making waste glass that circumvents the problems of dissolving nuclear waste in molten glass at high temperatures. Because the reactive mixing process is independent of the inherent viscosity of the melt, any glass composition can be prepared with equal facility. Separation of the mixing and melting operations permits novel glass fabrication methods to be employed

A method for studying decision-making by guideline development groups

Directory of Open Access Journals (Sweden)

Michie Susan

2009-08-01

Full Text Available Abstract Background Multidisciplinary guideline development groups (GDGs have considerable influence on UK healthcare policy and practice, but previous research suggests that research evidence is a variable influence on GDG recommendations. The Evidence into Recommendations (EiR study has been set up to document social-psychological influences on GDG decision-making. In this paper we aim to evaluate the relevance of existing qualitative methodologies to the EiR study, and to develop a method best-suited to capturing influences on GDG decision-making. Methods A research team comprised of three postdoctoral research fellows and a multidisciplinary steering group assessed the utility of extant qualitative methodologies for coding verbatim GDG meeting transcripts and semi-structured interviews with GDG members. A unique configuration of techniques was developed to permit data reduction and analysis. Results Our method incorporates techniques from thematic analysis, grounded theory analysis, content analysis, and framework analysis. Thematic analysis of individual interviews conducted with group members at the start and end of the GDG process defines discrete problem areas to guide data extraction from GDG meeting transcripts. Data excerpts are coded both inductively and deductively, using concepts taken from theories of decision-making, social influence and group processes. These codes inform a framework analysis to describe and explain incidents within GDG meetings. We illustrate the application of the method by discussing some preliminary findings of a study of a National Institute for Health and Clinical Excellence (NICE acute physical health GDG. Conclusion This method is currently being applied to study the meetings of three of NICE GDGs. These cover topics in acute physical health, mental health and public health, and comprise a total of 45 full-day meetings. The method offers potential for application to other health care and decision-making

Reasons, methods used and decision-making for pregnancy ...

African Journals Online (AJOL)

Objective: To explore the methods, reasons and decision-making process for termination of pregnancy among adolescents and older women, in Mulago hospital, Kampala, Uganda. Design: Comparative study. Subjects: Nine hundred and forty two women seeking postabortion care, of which 333 had induced abortion (of ...

Sustainability Evaluation Framework of Urban Stormwater Drainage Options for Arid Environments Using Hydraulic Modeling and Multicriteria Decision-Making

Directory of Open Access Journals (Sweden)

Mohammad Alhumaid

2018-04-01

Full Text Available Stormwater drainage systems in urban areas located in arid environmental regions generally consist of storm-sewer networks and man-made ponds for the collection and disposal of runoff, respectively. Due to expansion in cities’ boundaries as a result of population growth, the capacity of existing drainage systems has been exhausted. Therefore, such systems overflow even during the smaller (than the design return period floods. At the same time, changing rainfall patterns and flash floods due to climate change are other phenomena that need appropriate attention. Consequently, the municipalities in arid environmental regions are facing challenges for effective decision-making concerning (i improvement needs for drainage networks for safe collection of stormwater, (ii selection of most feasible locations for additional ponds, and (iii evaluation of other suitable options, such as micro-tunneling. In this research, a framework has been developed to evaluate different stormwater drainage options for urban areas of arid regions. Rainfall-runoff modeling was performed with the help of Hydrological-Engineering-Centre, Hydrological-Modelling-System (HEC-HMS. To evaluate the efficacy of each option for handling a given design flood, hydraulic-modeling was performed using SewerGEMS. Meteorological and topographical data was gathered from the Municipality of Buraydah and processed to generate different inputs required for hydraulic modeling. Finally, multicriteria decision-making (MCDM was performed to evaluate all the options on the basis of four sustainability criteria, i.e., flood risk, economic viability, environmental impacts, and technical constraints. Criteria weights were established through group decision-making using the Analytic Hierarchy Process (AHP. Preference-Ranking-Organization-Method for Enrichment-Evaluation (PROMETHEE II was used for final ranking of stormwater drainage options. The proposed framework has been implemented on a case of

Method of making electrodes for electrochemical cell. [Li-Al alloy

Science.gov (United States)

Kaun, T.D.; Kilsdonk, D.J.

1981-07-29

A method is described for making an electrode for an electrochemical cell in which particulate electrode-active material is mixed with a liquid organic carrier chemically inert with respect to the electrode-active material, mixing the liquid carrier to form an extrudable slurry. The liquid carrier is present in an amount of from about 10 to about 50% by volume of the slurry, and then the carrier is removed from the slurry leaving the electrode-active material. The method is particularly suited for making a lithium-aluminum alloy negative electrode for a high-temperature cell.

Methods of making bainitic steel materials

Science.gov (United States)

Bakas, Michael Paul; Chu, Henry Shiu-Hung; Zagula, Thomas Andrew; Langhorst, Benjamin Robert

2018-01-16

Methods of making bainitic steels may involve austenitizing a quantity of steel by exposing the quantity of steel to a first temperature. A composition of the quantity of steel may be configured to impede formation of non-bainite ferrite, pearlite, and Widmanstatten ferrite. The quantity of steel may be heat-treated to form bainite by exposing the quantity of steel to a second, lower temperature. The second, lower temperature may be stabilized by exposing the quantity of steel to the second, lower temperature in the presence of a thermal ballast.

Multi-objective decision-making under uncertainty: Fuzzy logic methods

Science.gov (United States)

Hardy, Terry L.

1995-01-01

Fuzzy logic allows for quantitative representation of vague or fuzzy objectives, and therefore is well-suited for multi-objective decision-making. This paper presents methods employing fuzzy logic concepts to assist in the decision-making process. In addition, this paper describes software developed at NASA Lewis Research Center for assisting in the decision-making process. Two diverse examples are used to illustrate the use of fuzzy logic in choosing an alternative among many options and objectives. One example is the selection of a lunar lander ascent propulsion system, and the other example is the selection of an aeration system for improving the water quality of the Cuyahoga River in Cleveland, Ohio. The fuzzy logic techniques provided here are powerful tools which complement existing approaches, and therefore should be considered in future decision-making activities.

The multicriteria method for environmentally oriented business decision-making

Directory of Open Access Journals (Sweden)

Čančer Vesna

2004-01-01

Full Text Available Stimulated by the expressed managers’ need for some completed methods for environmental management in enterprises, we present the method for environmentally oriented business decision-making. It is based on simulations where optimization models of business processes are used as scenarios. The possibilities for an integrated approach to environmental protection are introduced and – decomposed according to the type of the considered element by using zero-one variables – included in the optimization models. The method is completed for multicriteria decision-making where in the simulations obtained optimal values are included. In a real-life case where the Analytic Hierarchy Process technique is used to evaluate environmentally oriented business processes, special attention is given to criteria and weights: we consider preferences and survey findings on the environmental impact of business processes in the enterprise, survey findings on environmental management in the processing industry, and ecobalances.

Study of decision framework of wind farm project plan selection under intuitionistic fuzzy set and fuzzy measure environment

International Nuclear Information System (INIS)

Wu, Yunna; Geng, Shuai; Xu, Hu; Zhang, Haobo

2014-01-01

Highlights: • Experts’ opinions are expressed by using the intuitionistic fuzzy values. • Fuzzy measure is used to solve the dependence problem of criteria. • The compensatory problem of performance scores is reasonably processed. - Abstract: Project selection plays an important role in the entire life cycle of wind farm project and the multi-criteria decision making (MCDM) methods are very important in the whole wind farm project plan selection process. There are problems in the present MCDM methods decrease evaluation quality of the wind farm project plans: first, the information loss exists in the wind farm project plan evaluation process. Second, it is difficult to satisfy the independent assumption of the multi-criteria decision making methods used in the wind farm project plan evaluation in fact. Third, the compensatory problem of performance scores of the wind farm project plans is processed unreasonably. Hence the innovation points of this paper are as follows: first, the intuitionistic fuzzy numbers are used instead of fuzzy numbers or numerical values to reflect the experts’ intuitive preferences to decrease the probability of information loss; second, the fuzzy measure is used to rate the important degrees of criteria in order to avoid the independent assumption and to increase the reasonability; third, the partial compensatory problem of performance scores is well processed by using intuitionistic fuzzy Choquet (IFC) operator and generalized intuitionistic fuzzy ordered geometric averaging (GIFOGA) operator. These operators can deal with the compensatory performance scores and non-compensatory performance scores respectively. Finally, a case study demonstrates the effectiveness of decision framework

A Novel Extension Decision-Making Method for Selecting Solar Power Systems

Directory of Open Access Journals (Sweden)

Meng-Hui Wang

2013-01-01

Full Text Available Due to the complex parameters of a solar power system, the designer not only must think about the load demand but also needs to consider the price, weight, and annual power generating capacity (APGC and maximum power of the solar system. It is an important task to find the optimal solar power system with many parameters. Therefore, this paper presents a novel decision-making method based on the extension theory; we call it extension decision-making method (EDMM. Using the EDMM can make it quick to select the optimal solar power system. The paper proposed this method not only to provide a useful estimated tool for the solar system engineers but also to supply the important reference with the installation of solar systems to the consumer.

Tools and methods for environmental decision-making in energy production companies

International Nuclear Information System (INIS)

Tulenheimo, V.; Thun, R.; Backman, M.

1996-01-01

This report concentrates on the models and methods used for internal environmental decision-making by company management. The amount of available models aiming at this purpose is numerous. The methods differ from each other for example in their comprehensiveness, in the types of effects included, in the degree of quantification, and in the method used for weighting of environmental impacts. Different types of models and methods give the results of the valuation in qualitative, in non-monetary, or even in monetary units. Traditional financial analysis is, however, still used to compare different investment options. First-hand experiences of model applications show that a lot of work is still needed before the new integrated methodologies can be incorporated into existing decision-making systems in standardized forms. Developers of methodologies and software systems for environmental costing will benefit from co-operation and from inputs by cross-functional teams of the company. The future will show if it is possible to combine the best features of useful methods and find a solution which is leading to facilitated company environmental decision-making which is undisputed and reliable

Post-prandial effects of hazelnut-enriched high fat meal on LDL oxidative status, oxidative and inflammatory gene expression of healthy subjects: a randomized trial.

Science.gov (United States)

Di Renzo, L; Merra, G; Botta, R; Gualtieri, P; Manzo, A; Perrone, M A; Mazza, M; Cascapera, S; De Lorenzo, A

2017-04-01

Postprandial oxidative stress is characterized by an increased susceptibility of the organism towards oxidative damage after consumption of a meal rich in lipids and/or carbohydrates. Micronutrients modulate the immune system and exert a protective action by reducing low-density lipoproteins oxidation (ox-LDL) via induction of antioxidant enzymes. The clinical study was a randomized and cross-over trial, conducted through the CONSORT flowchart. We evaluated the gene expression of 103 genes related to oxidative stress (HOSp) and human inflammasome pathways (HIp), and ox-LDL level at fasting and after 40 g raw "Tonda Gentile delle Langhe" hazelnut consumption, in association with a McDonald's® Meal (McDM) in 22 healthy human volunteers. Ox-LDL levels significantly increased comparing no dietary treatment (NDT) vs. McDM, and decreased comparing McDM vs. McDM + H (p<0.05). Percentage of significant genes expressed after each dietary treatment were the follows: (A) NDT vs. McDM: 3.88% HIp and 17.48% HOSp; (B) NDT vs. McDM + H: 17.48% HIp and 23.30% HOSp; (C) McDM vs. McDM + H: 17.48% HIp and 33.98% HOSp. Hazelnut consumption reduced post prandial risk factors of atherosclerosis, such as ox-LDL, and the expression of inflammation and oxidative stress related genes. Chronic studies on larger population are necessary before definitive conclusions.

Changes in LDL Oxidative Status and Oxidative and Inflammatory Gene Expression after Red Wine Intake in Healthy People: A Randomized Trial

Science.gov (United States)

Di Renzo, Laura; Marsella, Luigi Tonino; Gualtieri, Paola; Gratteri, Santo; Tomasi, Diego; Gaiotti, Federica

2015-01-01

Postprandial oxidative stress is characterized by an increased susceptibility of the organism towards oxidative damage after consumption of a meal rich in lipids and/or carbohydrates. Micronutrients modulate immune system and exert a protective action by reducing low density lipoproteins (LDL) oxidation via induction of antioxidant enzymes. We evaluated the gene expression of oxidative stress (HOSp), inflammasome (HIp), and human drug metabolism pathways (HDM) and ox-LDL level at baseline and after the intake of red wine naturally enriched with resveratrol (NPVRW), in association with or without a McDonald's meal (McDM). The ox-LDL levels significantly increase comparing baseline (B) versus McDM and decreased comparing McDM versus McDM + NPVRW (P ≤ 0.05). Percentages of significant genes expressed after each nutritional intervention were the following: (1) B versus McDM, 2.88% HOSp, 2.40% of HIp, and 3.37% of HDMp; (2) B versus McDM + NPVRW, 1.44% of HOSp, 4.81% of HIp, and 0.96% of HDMp; (3) McDM versus McDM + NPVRW, 2.40% of HOSp, 2.40% of HIp, and 5.77% of HDMp; (4) B versus NPVRW, 4.80% HOSp, 3.85% HIp, and 3.85% HDMp. NPVRW intake reduced postprandial ox-LDL and the expression of inflammation and oxidative stress related genes. Chronic studies on larger population are necessary before definitive conclusions. PMID:26101461

Changes in LDL Oxidative Status and Oxidative and Inflammatory Gene Expression after Red Wine Intake in Healthy People: A Randomized Trial

Directory of Open Access Journals (Sweden)

Laura Di Renzo

2015-01-01

Full Text Available Postprandial oxidative stress is characterized by an increased susceptibility of the organism towards oxidative damage after consumption of a meal rich in lipids and/or carbohydrates. Micronutrients modulate immune system and exert a protective action by reducing low density lipoproteins (LDL oxidation via induction of antioxidant enzymes. We evaluated the gene expression of oxidative stress (HOSp, inflammasome (HIp, and human drug metabolism pathways (HDM and ox-LDL level at baseline and after the intake of red wine naturally enriched with resveratrol (NPVRW, in association with or without a McDonald’s meal (McDM. The ox-LDL levels significantly increase comparing baseline (B versus McDM and decreased comparing McDM versus McDM + NPVRW (P≤0.05. Percentages of significant genes expressed after each nutritional intervention were the following: (1 B versus McDM, 2.88% HOSp, 2.40% of HIp, and 3.37% of HDMp; (2 B versus McDM + NPVRW, 1.44% of HOSp, 4.81% of HIp, and 0.96% of HDMp; (3 McDM versus McDM + NPVRW, 2.40% of HOSp, 2.40% of HIp, and 5.77% of HDMp; (4 B versus NPVRW, 4.80% HOSp, 3.85% HIp, and 3.85% HDMp. NPVRW intake reduced postprandial ox-LDL and the expression of inflammation and oxidative stress related genes. Chronic studies on larger population are necessary before definitive conclusions.

Method of making a sodium sulfur battery

Science.gov (United States)

Elkins, Perry E.

1981-01-01

A method of making a portion of a sodium sulfur battery is disclosed. The battery portion made is a portion of the container which defines the volume for the cathodic reactant materials which are sulfur and sodium polysulfide materials. The container portion is defined by an outer metal casing with a graphite liner contained therein, the graphite liner having a coating on its internal diameter for sealing off the porosity thereof. The steel outer container and graphite pipe are united by a method which insures that at the operating temperature of the battery, relatively low electrical resistance exists between the two materials because they are in intimate contact with one another.

Decision Making Methods in Space Economics and Systems Engineering

Science.gov (United States)

Shishko, Robert

2006-01-01

This viewgraph presentation reviews various methods of decision making and the impact that they have on space economics and systems engineering. Some of the methods discussed are: Present Value and Internal Rate of Return (IRR); Cost-Benefit Analysis; Real Options; Cost-Effectiveness Analysis; Cost-Utility Analysis; Multi-Attribute Utility Theory (MAUT); and Analytic Hierarchy Process (AHP).

Fishmeal Supplier Evaluation and Selection for Aquaculture Enterprise Sustainability with a Fuzzy MCDM Approach

Directory of Open Access Journals (Sweden)

Tsung-Hsien Wu

2017-11-01

Full Text Available In the aquaculture industry, feed that is of poor quality or nutritionally imbalanced can cause problems including low weight, poor growth, poor palatability, and increased mortality, all of which can induce a decrease in aquaculture production. Fishmeal is considered a better source of protein and its addition as an ingredient in the aquafeed makes aquatic animals grow fast and healthy. This means that fishmeal is the most important feed ingredient in aquafeed for the aquaculture industry. For the aquaculture industry in Taiwan, about 144,000 ton/USD $203,245,000 of fishmeal was imported, mostly from Peru, in 2016. Therefore, the evaluation and selection of fishmeal suppliers is a very important part of the decision-making process for a Taiwanese aquaculture enterprise. This study constructed a multiple criteria decision-making evaluation model for the selection of fishmeal suppliers using the VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR approach based on the weights obtained with the entropy method in a fuzzy decision-making environment. This hybrid approach could effectively and conveniently measure the comprehensive performance of the main Peruvian fishmeal suppliers for practical applications. In addition, the results and processes described herein function as a good reference for an aquaculture enterprise in making decisions when purchasing fishmeal.

Evaluation and selection of decision-making methods to assess landfill mining projects.

Science.gov (United States)

Hermann, Robert; Baumgartner, Rupert J; Vorbach, Stefan; Ragossnig, Arne; Pomberger, Roland

2015-09-01

For the first time in Austria, fundamental technological and economic studies on recovering secondary raw materials from large landfills have been carried out, based on the 'LAMIS - Landfill Mining Austria' pilot project. A main focus of the research - and the subject of this article - was to develop an assessment or decision-making procedure that allows landfill owners to thoroughly examine the feasibility of a landfill mining project in advance. Currently there are no standard procedures that would sufficiently cover all the multiple-criteria requirements. The basic structure of the multiple attribute decision making process was used to narrow down on selection, conceptual design and assessment of suitable procedures. Along with a breakdown into preliminary and main assessment, the entire foundation required was created, such as definitions of requirements to an assessment method, selection and accurate description of the various assessment criteria and classification of the target system for the present 'landfill mining' vs. 'retaining the landfill in after-care' decision-making problem. Based on these studies, cost-utility analysis and the analytical-hierarchy process were selected from the range of multiple attribute decision-making procedures and examined in detail. Overall, both methods have their pros and cons with regard to their use for assessing landfill mining projects. Merging these methods or connecting them with single-criteria decision-making methods (like the net present value method) may turn out to be reasonable and constitute an appropriate assessment method. © The Author(s) 2015.

Membranes, methods of making membranes, and methods of separating gases using membranes

Science.gov (United States)

Ho, W. S. Winston

2012-10-02

Membranes, methods of making membranes, and methods of separating gases using membranes are provided. The membranes can include at least one hydrophilic polymer, at least one cross-linking agent, at least one base, and at least one amino compound. The methods of separating gases using membranes can include contacting a gas stream containing at least one of CO.sub.2, H.sub.2S, and HCl with one side of a nonporous and at least one of CO.sub.2, H.sub.2S, and HCl selectively permeable membrane such that at least one of CO.sub.2, H.sub.2S, and HCl is selectively transported through the membrane.

A method for studying decision-making by guideline development groups.

Science.gov (United States)

Gardner, Benjamin; Davidson, Rosemary; McAteer, John; Michie, Susan

2009-08-05

Multidisciplinary guideline development groups (GDGs) have considerable influence on UK healthcare policy and practice, but previous research suggests that research evidence is a variable influence on GDG recommendations. The Evidence into Recommendations (EiR) study has been set up to document social-psychological influences on GDG decision-making. In this paper we aim to evaluate the relevance of existing qualitative methodologies to the EiR study, and to develop a method best-suited to capturing influences on GDG decision-making. A research team comprised of three postdoctoral research fellows and a multidisciplinary steering group assessed the utility of extant qualitative methodologies for coding verbatim GDG meeting transcripts and semi-structured interviews with GDG members. A unique configuration of techniques was developed to permit data reduction and analysis. Our method incorporates techniques from thematic analysis, grounded theory analysis, content analysis, and framework analysis. Thematic analysis of individual interviews conducted with group members at the start and end of the GDG process defines discrete problem areas to guide data extraction from GDG meeting transcripts. Data excerpts are coded both inductively and deductively, using concepts taken from theories of decision-making, social influence and group processes. These codes inform a framework analysis to describe and explain incidents within GDG meetings. We illustrate the application of the method by discussing some preliminary findings of a study of a National Institute for Health and Clinical Excellence (NICE) acute physical health GDG. This method is currently being applied to study the meetings of three of NICE GDGs. These cover topics in acute physical health, mental health and public health, and comprise a total of 45 full-day meetings. The method offers potential for application to other health care and decision-making groups.

Method of making nuclear fuel bodies

International Nuclear Information System (INIS)

Davis, D.E.; Leary, D.F.

1977-01-01

A method of making nuclear fuel bodies is described comprising: providing particulate graphite having a particle size not greater than about 1500 microns; impregnating the graphite with a polymerizable organic resin in liquid form; treating the impregnated particles with a hot aqueous acid solution to pre-cure the impregnated resin and to remove excess resin from the surfaces of said graphite particles; heating the treated particles to polymerize the impregnant; blending the impregnated particles with particulate nuclear fuel; and forming a nuclear fuel body by joining the blend of particles into a cohesive mass using a carbonaceous binder

Grey Language Hesitant Fuzzy Group Decision Making Method Based on Kernel and Grey Scale.

Science.gov (United States)

Li, Qingsheng; Diao, Yuzhu; Gong, Zaiwu; Hu, Aqin

2018-03-02

Based on grey language multi-attribute group decision making, a kernel and grey scale scoring function is put forward according to the definition of grey language and the meaning of the kernel and grey scale. The function introduces grey scale into the decision-making method to avoid information distortion. This method is applied to the grey language hesitant fuzzy group decision making, and the grey correlation degree is used to sort the schemes. The effectiveness and practicability of the decision-making method are further verified by the industry chain sustainable development ability evaluation example of a circular economy. Moreover, its simplicity and feasibility are verified by comparing it with the traditional grey language decision-making method and the grey language hesitant fuzzy weighted arithmetic averaging (GLHWAA) operator integration method after determining the index weight based on the grey correlation.

Mesoporous metal oxide microsphere electrode compositions and their methods of making

Science.gov (United States)

Parans Paranthaman, Mariappan; Bi, Zhonghe; Bridges, Craig A.; Brown, Gilbert M.

2017-04-11

Compositions and methods of making are provided for treated mesoporous metal oxide microspheres electrodes. The compositions include microspheres with an average diameter between about 200 nanometers and about 10 micrometers and mesopores on the surface and interior of the microspheres. The methods of making include forming a mesoporous metal oxide microsphere composition and treating the mesoporous metal oxide microspheres by at least annealing in a reducing atmosphere, doping with an aliovalent element, and coating with a coating composition.

A New Hesitant Fuzzy Linguistic TOPSIS Method for Group Multi-Criteria Linguistic Decision Making

Directory of Open Access Journals (Sweden)

Fangling Ren

2017-11-01

Full Text Available Hesitant fuzzy linguistic decision making is a focus point in linguistic decision making, in which the main method is based on preference ordering. This paper develops a new hesitant fuzzy linguistic TOPSIS method for group multi-criteria linguistic decision making; the method is inspired by the TOPSIS method and the preference degree between two hesitant fuzzy linguistic term sets (HFLTSs. To this end, we first use the preference degree to define a pseudo-distance between two HFLTSs and analyze its properties. Then we present the positive (optimistic and negative (pessimistic information of each criterion provided by each decision maker and aggregate these by using weights of decision makers to obtain the hesitant fuzzy linguistic positive and negative ideal solutions. On the basis of the proposed pseudo-distance, we finally obtain the positive (negative ideal separation matrix and a new relative closeness degree to rank alternatives. We also design an algorithm based on the provided method to carry out hesitant fuzzy linguistic decision making. An illustrative example shows the elaboration of the proposed method and comparison with the symbolic aggregation-based method, the hesitant fuzzy linguistic TOPSIS method and the hesitant fuzzy linguistic VIKOR method; it seems that the proposed method is a useful and alternative decision-making method.

Performance Evaluation of Extension Education Centers in Universities Based on the Balanced Scorecard

Science.gov (United States)

Wu, Hung-Yi; Lin, Yi-Kuei; Chang, Chi-Hsiang

2011-01-01

This study aims at developing a set of appropriate performance evaluation indices mainly based on balanced scorecard (BSC) for extension education centers in universities by utilizing multiple criteria decision making (MCDM). Through literature reviews and experts who have real practical experiences in extension education, adequate performance…

Do Teachers Make Decisions Like Firefighters? Applying Naturalistic Decision-Making Methods to Teachers' In-Class Decision Making in Mathematics

Science.gov (United States)

Jazby, Dan

2014-01-01

Research into human decision making (DM) processes from outside of education paint a different picture of DM than current DM models in education. This pilot study assesses the use of critical decision method (CDM)--developed from observations of firefighters' DM -- in the context of primary mathematics teachers' in-class DM. Preliminary results…

TODIM Method for Single-Valued Neutrosophic Multiple Attribute Decision Making

Directory of Open Access Journals (Sweden)

Dong-Sheng Xu

2017-10-01

Full Text Available Recently, the TODIM has been used to solve multiple attribute decision making (MADM problems. The single-valued neutrosophic sets (SVNSs are useful tools to depict the uncertainty of the MADM. In this paper, we will extend the TODIM method to the MADM with the single-valued neutrosophic numbers (SVNNs. Firstly, the definition, comparison, and distance of SVNNs are briefly presented, and the steps of the classical TODIM method for MADM problems are introduced. Then, the extended classical TODIM method is proposed to deal with MADM problems with the SVNNs, and its significant characteristic is that it can fully consider the decision makers’ bounded rationality which is a real action in decision making. Furthermore, we extend the proposed model to interval neutrosophic sets (INSs. Finally, a numerical example is proposed.

Selected business intelligence methods for decision-making support in a finance institution

OpenAIRE

Mezera, Filip; Křupka, Jiří

2017-01-01

This article deals with decision-making support methods’ implementation in a medium size financial company with international operations. The objective of this article is to show the abilities of these methods to precise decision-making of management. At the beginning of this article there is briefly described the existing situation in this business sector in Central Europe. After that part Business Intelligence methods are described as well as the reasons while these methods have been introd...

Unsupported palladium alloy membranes and methods of making same

Science.gov (United States)

Way, J. Douglas; Thoen, Paul; Gade, Sabina K.

2015-06-02

The invention provides support-free palladium membranes and methods of making these membranes. Single-gas testing of the unsupported foils produced hydrogen permeabilities equivalent to thicker membranes produced by cold-rolling. Defect-free films as thin as 7.2 microns can be fabricated, with ideal H.sub.2/N.sub.2 selectivities as high as 40,000. Homogeneous membrane compositions may also be produced using these methods.

Printable semiconductor structures and related methods of making and assembling

Science.gov (United States)

Nuzzo, Ralph G.; Rogers, John A.; Menard, Etienne; Lee, Keon Jae; Khang; , Dahl-Young; Sun, Yugang; Meitl, Matthew; Zhu, Zhengtao; Ko, Heung Cho; Mack, Shawn

2013-03-12

The present invention provides a high yield pathway for the fabrication, transfer and assembly of high quality printable semiconductor elements having selected physical dimensions, shapes, compositions and spatial orientations. The compositions and methods of the present invention provide high precision registered transfer and integration of arrays of microsized and/or nanosized semiconductor structures onto substrates, including large area substrates and/or flexible substrates. In addition, the present invention provides methods of making printable semiconductor elements from low cost bulk materials, such as bulk silicon wafers, and smart-materials processing strategies that enable a versatile and commercially attractive printing-based fabrication platform for making a broad range of functional semiconductor devices.

SOLVING OPTIMAL ASSEMBLY LINE CONFIGURATION TASK BY MULTIOBJECTIVE DECISION MAKING METHODS

Directory of Open Access Journals (Sweden)

Ján ČABALA

2017-06-01

Full Text Available This paper deals with looking for the optimal configuration of automated assembly line model placed within Department of Cybernetics and Artificial Intelligence (DCAI. In order to solve this problem, Stateflow model of each configuration was created to simulate the behaviour of particular assembly line configuration. Outputs from these models were used as inputs into the multiobjective decision making process. Multi-objective decision-making methods were subsequently used to find the optimal configuration of assembly line. Paper describes the whole process of solving this task, from building the models to choosing the best configuration. Specifically, the problem was resolved using the experts’ evaluation method for evaluating the weights of every decision-making criterion, while the ELECTRE III, TOPSIS and AGREPREF methods were used for ordering the possible solutions from the most to the least suitable alternative. Obtained results were compared and final solution of this multi-objective decisionmaking problem is chosen.

Selection of an Appropriate Mechanized Mining Technical Process for Thin Coal Seam Mining

Directory of Open Access Journals (Sweden)

Chen Wang

2015-01-01

Full Text Available Mechanized mining technical process (MMTP related to the control method of the shearer is a vital process in thin coal seam mining operations. An appropriate MMTP is closely related to safety, productivity, labour intensity, and efficiency. Hence, the evaluation of alternative MMTP is an important part of the mining design. Several parameters should be considered in MMTP evaluation, so the evaluation is complex and must be compliant with a set of criteria. In this paper, two multiple criteria decision-making (MCDM methods, Analytic Hierarchy Process (AHP and Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE, were adopted for this evaluation. Then, the most appropriate MMTP for a thin coal seam working face was selected in China.

Unicriterion Model: A Qualitative Decision Making Method That Promotes Ethics

Directory of Open Access Journals (Sweden)

Fernando Guilherme Silvano Lobo Pimentel

2011-06-01

Full Text Available Management decision making methods frequently adopt quantitativemodels of several criteria that bypass the question of whysome criteria are considered more important than others, whichmakes more difficult the task of delivering a transparent viewof preference structure priorities that might promote ethics andlearning and serve as a basis for future decisions. To tackle thisparticular shortcoming of usual methods, an alternative qualitativemethodology of aggregating preferences based on the rankingof criteria is proposed. Such an approach delivers a simpleand transparent model for the solution of each preference conflictfaced during the management decision making process. Themethod proceeds by breaking the decision problem into ‘two criteria– two alternatives’ scenarios, and translating the problem ofchoice between alternatives to a problem of choice between criteriawhenever appropriate. The unicriterion model method is illustratedby its application in a car purchase and a house purchasedecision problem.

Optimal Siting of Charging Stations for Electric Vehicles Based on Fuzzy Delphi and Hybrid Multi-Criteria Decision Making Approaches from an Extended Sustainability Perspective

Directory of Open Access Journals (Sweden)

Huiru Zhao

2016-04-01

Full Text Available Optimal siting of electric vehicle charging stations (EVCSs is crucial to the sustainable development of electric vehicle systems. Considering the defects of previous heuristic optimization models in tackling subjective factors, this paper employs a multi-criteria decision-making (MCDM framework to address the issue of EVCS siting. The initial criteria for optimal EVCS siting are selected from extended sustainability theory, and the vital sub-criteria are further determined by using a fuzzy Delphi method (FDM, which consists of four pillars: economy, society, environment and technology perspectives. To tolerate vagueness and ambiguity of subjective factors and human judgment, a fuzzy Grey relation analysis (GRA-VIKOR method is employed to determine the optimal EVCS site, which also improves the conventional aggregating function of fuzzy Vlsekriterijumska Optimizacijia I Kompromisno Resenje (VIKOR. Moreover, to integrate the subjective opinions as well as objective information, experts’ ratings and Shannon entropy method are employed to determine combination weights. Then, the applicability of proposed framework is demonstrated by an empirical study of five EVCS site alternatives in Tianjin. The results show that A3 is selected as the optimal site for EVCS, and sub-criteria affiliated with environment obtain much more attentions than that of other sub-criteria. Moreover, sensitivity analysis indicates the selection results remains stable no matter how sub-criteria weights are changed, which verifies the robustness and effectiveness of proposed model and evaluation results. This study provides a comprehensive and effective method for optimal siting of EVCS and also innovates the weights determination and distance calculation for conventional fuzzy VIKOR.

Integrating Spatial Multi Criteria Decision Making (SMCDM) with Geographic Information Systems (GIS) for delineation of the most suitable areas for aquifer storage and recovery (ASR)

Science.gov (United States)

Ahani Amineh, Zainab Banoo; Hashemian, Seyyed Jamal Al-Din; Magholi, Alireza

2017-08-01

Hamoon-Jazmoorian plain is located in southeast of Iran. Overexploitation of groundwater in this plain has led to water level decline and caused serious problems such as land subsidence, aquifer destruction and water quality degradation. The increasing population and agricultural development along with drought and climate change, have further increased the pressure on water resources in this region over the last years. In order to overcome such crisis, introduction of surface water into an aquifer at particular locations can be a suitable solution. A wide variety of methods have been developed to recharge groundwater, one of which is aquifer storage and recovery (ASR). One of the fundamental principles of making such systems is delineation of suitable areas based on scientific and natural facts in order to achieve relevant objectives. To that end, the Multi Criteria Decision Making (MCDM) in conjunction with the Geographic Information Systems (GIS) was applied in this study. More specifically, nine main parameters including depth of runoff as the considered source of water, morphology of the earth surface features such as geology, geomorphology, land use and land cover, drainage and aquifer characteristics along with quality of water in the aquifer were considered as the main layers in GIS. The runoff water available for artificial recharge in the basin was estimated through Soil Conservation Service (SCS) curve number method. The weighted curve number for each watershed was derived through spatial intersection of land use and hydrological soil group layers. Other thematic layers were extracted from satellite images, topographical map, and other collateral data sources, then weighed according to their influence in locating process. The Analytical Hierarchy Process (AHP) method was then used to calculate weights of individual parameters. The normalized weighted layers were then overlaid to build up the recharge potential map. The results revealed that 34% of the

An Intelligent Fleet Condition-Based Maintenance Decision Making Method Based on Multi-Agent

Directory of Open Access Journals (Sweden)

Bo Sun

2012-01-01

Full Text Available According to the demand for condition-based maintenance online decision making among a mission oriented fleet, an intelligent maintenance decision making method based on Multi-agent and heuristic rules is proposed. The process of condition-based maintenance within an aircraft fleet (each containing one or more Line Replaceable Modules based on multiple maintenance thresholds is analyzed. Then the process is abstracted into a Multi-Agent Model, a 2-layer model structure containing host negotiation and independent negotiation is established, and the heuristic rules applied to global and local maintenance decision making is proposed. Based on Contract Net Protocol and the heuristic rules, the maintenance decision making algorithm is put forward. Finally, a fleet consisting of 10 aircrafts on a 3-wave continuous mission is illustrated to verify this method. Simulation results indicate that this method can improve the availability of the fleet, meet mission demands, rationalize the utilization of support resources and provide support for online maintenance decision making among a mission oriented fleet.

Hesitant Fuzzy Thermodynamic Method for Emergency Decision Making Based on Prospect Theory.

Science.gov (United States)

Ren, Peijia; Xu, Zeshui; Hao, Zhinan

2017-09-01

Due to the timeliness of emergency response and much unknown information in emergency situations, this paper proposes a method to deal with the emergency decision making, which can comprehensively reflect the emergency decision making process. By utilizing the hesitant fuzzy elements to represent the fuzziness of the objects and the hesitant thought of the experts, this paper introduces the negative exponential function into the prospect theory so as to portray the psychological behaviors of the experts, which transforms the hesitant fuzzy decision matrix into the hesitant fuzzy prospect decision matrix (HFPDM) according to the expectation-levels. Then, this paper applies the energy and the entropy in thermodynamics to take the quantity and the quality of the decision values into account, and defines the thermodynamic decision making parameters based on the HFPDM. Accordingly, a whole procedure for emergency decision making is conducted. What is more, some experiments are designed to demonstrate and improve the validation of the emergency decision making procedure. Last but not the least, this paper makes a case study about the emergency decision making in the firing and exploding at Port Group in Tianjin Binhai New Area, which manifests the effectiveness and practicability of the proposed method.

Enhanced graphene oxide membranes and methods for making same

Science.gov (United States)

Shin, Yongsoon; Gotthold, David W.; Fifield, Leonard S.; Liu, Wei

2018-03-20

A method for making a graphene oxide membrane and a resulting free-standing graphene oxide membrane that provides desired qualities of water permeability and selectivity at larger sizes, thinner cross sections, and with increased ruggedness as compared to existing membranes and processes.

Application of fuzzy decision-making method in nuclear emergency

International Nuclear Information System (INIS)

Xu Zhixin; Xi Shuren; Qu Jingyuan

2005-01-01

Protective actions such as evacuation, sheltering and iodine administration can be taken to mitigate the radiological consequence in the event of an accidental release. In general, decision-making of countermeasures involves both quantitative and qualitative criteria. The conventional approaches to assessing these criteria tend to be less effective when dealing with those qualitative criteria that are imprecise or vague. In this regard, fuzzy set method is an alternative tool. It can cope with vague assessment in a better way. This paper presents the application of fussy methodology to decision-making of protective actions in nuclear emergencies. In this method linguistic terms and fuzzy triangular numbers are used to represent decision-maker's subjective assessment for different decision criteria considered and decision alternatives versus the decision criteria. Following the assessment performed by specialists, corresponding evaluations can be synthesized and ranked. Finally, the optimal strategy for implementing protective actions can be recommended. (authors)

Method for making carbon super capacitor electrode materials

Science.gov (United States)

Firsich, David W.; Ingersoll, David; Delnick, Frank M.

1998-01-01

A method for making near-net-shape, monolithic carbon electrodes for energy storage devices. The method includes the controlled pyrolysis and activation of a pressed shape of methyl cellulose powder with pyrolysis being carried out in two stages; pre-oxidation, preferably in air at a temperature between 200.degree.-250.degree. C., followed by carbonization under an inert atmosphere. An activation step to adjust the surface area of the carbon shape to a value desirable for the application being considered, including heating the carbon shape in an oxidizing atmosphere to a temperature of at least 300.degree. C., follows carbonization.

Enhancing Perception in Ethical Decision Making: A Method to Address Ill-Defined Training Domains

Science.gov (United States)

2010-08-01

Development Ethical Decision Making Qualitative Methods Applications of Gestalt Theory Decision Making Experiences Mixed-Method...U.S. Army Research Institute for the Behavioral and Social Sciences Research Report 1932 Enhancing Perception in Ethical...TYPE Final 3. DATES COVERED (from. . . to) April 2009 to May 2010 4. TITLE AND SUBTITLE Enhancing Perception in Ethical Decision Making: A

Hybrid radical energy storage device and method of making

Science.gov (United States)

Gennett, Thomas; Ginley, David S; Braunecker, Wade; Ban, Chunmei; Owczarczyk, Zbyslaw

2015-01-27

Hybrid radical energy storage devices, such as batteries or electrochemical devices, and methods of use and making are disclosed. Also described herein are electrodes and electrolytes useful in energy storage devices, for example, radical polymer cathode materials and electrolytes for use in organic radical batteries.

Methods for making anodes for lithium ion batteries

Science.gov (United States)

Xu, Wu; Canfield, Nathan L.; Zhang, Ji-Guang; Liu, Wei; Xiao, Jie; Wang, Deyu; Yang, Z. Gary

2015-05-26

Methods for making composite anodes, such as macroporous composite anodes, are disclosed. Embodiments of the methods may include forming a tape from a slurry including a substrate metal precursor, an anode active material, a pore-forming agent, a binder, and a solvent. A laminated structure may be prepared from the tape and sintered to produce a porous structure, such as a macroporous structure. The macroporous structure may be heated to reduce a substrate metal precursor and/or anode active material. Macroporous composite anodes formed by some embodiments of the disclosed methods comprise a porous metal and an anode active material, wherein the anode active material is both externally and internally incorporated throughout and on the surface of the macroporous structure.

Method of Making Reaction Induced Phase Separation Membranes and Uses Thereof

KAUST Repository

Peinemann, Klaus-Viktor; Aburabie, Jamaliah Hani; Villalobos, Luis Francisco

2017-01-01

Provided herein are methods of making asymmetric membranes comprising a first layer and a second layer. The methods include preparing a polymeric solution comprising one or more polymers, casting the polymeric solution to form a polymeric film

Method of making stepped photographic density standards of radiographic photographs

International Nuclear Information System (INIS)

Borovin, I.V.; Kondina, M.A.

1987-01-01

In industrial radiography practice the need often arises for a prompt evaluation of the photographic density of an x-ray film. A method of making stepped photographic density standards for industrial radiography by contact printing from a negative is described. The method is intended for industrial radiation flaw detection laboratories not having specialized sensitometric equipment

Prioritizing of effective factors on development of medicinal plants cultivation using analytic network process

Directory of Open Access Journals (Sweden)

Ghorbanali Rassam

2014-07-01

Full Text Available For the overall development of medicinal plants cultivation in Iran, there is a need to identify various effective factors on medicinal plant cultivation. A proper method for identifying the most effective factor on the development of the medicinal plants cultivation is essential. This research conducted in order to prioritizing of the effective criteria for the development of medicinal plant cultivation in North Khorasan province in Iran using Analytical Network Process (ANP method. The multi-criteria decision making (MCDM is suggested to be a viable method for factor selection and the analytic network process (ANP has been used as a tool for MCDM. For this purpose a list of effective factors offered to expert group. Then pair wise comparison questionnaires were distributed between relevant researchers and local producer experts of province to get their opinions about the priority of criteria and sub- criteria. The questionnaires were analyzed using Super Decision software. We illustrated the use of the ANP by ranking main effective factors such as economic, educational-extension services, cultural-social and supportive policies on development of medicinal plants. The main objective of the present study was to develop ANP as a decision making tool for prioritizing factors affecting the development of medicinal plants cultivation. Results showed that the ANP methodology was perfectly suited to tackling the complex interrelations involved in selection factor in this case. Also the results of the process revealed that among the factors, supporting the cultivation of medicinal plants, build the infrastructure for marketing support, having educated farmer and easy access to production input have most impact on the development of medicinal plant cultivation.

The application of outsourcing decision-making methods in a logistics context in South Africa

Directory of Open Access Journals (Sweden)

Naomi Bloem

2015-07-01

Full Text Available Background: Companies have often relinquished the control of important business functions to outside suppliers for the sake of short-term savings and because of the lack of use of proper decision-making methods within the business. Objectives: This article identified three methods of decision-making and applied it to a logistics outsourcing problem. The logistics outsourcing problem consisted of a make-or-buy decision as well as a supplier selection process. The purpose of the study was to determine the most suitable method in the case of logistics outsourcing. Method: The decision-making methods were applied to a South African case study within the fast moving consumer goods (FMCG industry. The logistics functions considered in the case study included secondary distribution and warehousing of finished goods. Each method considered the same evaluation criteria and the results were analysed and compared. Results: Each method produced different results to the logistics outsourcing problem. The method developed by Platts, Probert and Canez (2000 suggested that the logistics functions be insourced. The decision tree method suggested outsourcing both functions, with a unit rate cost model. The results from the linear programming (LP method indicated that the secondary distribution function should be insourced and the warehousing function outsourced, with a fixed and variable cost model pending further analysis of the demand trends. Conclusion: The study provides empirical evidence that proven outsourcing decision-making methods, such as the method developed by Platts et al. (2000, the LP method and the decision tree method traditionally applied to a manufacturing outsourcing decision problem, can be adapted and applied to a logistics outsourcing decision problem of a South African FMCG company.

Analyzing the drivers of green manufacturing with fuzzy approach

DEFF Research Database (Denmark)

Govindan, Kannan; Diabat, Ali; Madan Shankar, K.

2015-01-01

India, and aided by their replies; a pair-wise comparison was made among the drivers. The pair-wise comparison is used as an input data and the drivers were analyzed on its basis. The analysis resorted to the use of a fuzzy Multi Criteria Decision Making (MCDM) approach. The obtained results...

An Intuitionistic Fuzzy Stochastic Decision-Making Method Based on Case-Based Reasoning and Prospect Theory

Directory of Open Access Journals (Sweden)

Peng Li

2017-01-01

Full Text Available According to the case-based reasoning method and prospect theory, this paper mainly focuses on finding a way to obtain decision-makers’ preferences and the criterion weights for stochastic multicriteria decision-making problems and classify alternatives. Firstly, we construct a new score function for an intuitionistic fuzzy number (IFN considering the decision-making environment. Then, we aggregate the decision-making information in different natural states according to the prospect theory and test decision-making matrices. A mathematical programming model based on a case-based reasoning method is presented to obtain the criterion weights. Moreover, in the original decision-making problem, we integrate all the intuitionistic fuzzy decision-making matrices into an expectation matrix using the expected utility theory and classify or rank the alternatives by the case-based reasoning method. Finally, two illustrative examples are provided to illustrate the implementation process and applicability of the developed method.

INTEGRATING DATA ANALYTICS AND SIMULATION METHODS TO SUPPORT MANUFACTURING DECISION MAKING

Science.gov (United States)

Kibira, Deogratias; Hatim, Qais; Kumara, Soundar; Shao, Guodong

2017-01-01

Modern manufacturing systems are installed with smart devices such as sensors that monitor system performance and collect data to manage uncertainties in their operations. However, multiple parameters and variables affect system performance, making it impossible for a human to make informed decisions without systematic methodologies and tools. Further, the large volume and variety of streaming data collected is beyond simulation analysis alone. Simulation models are run with well-prepared data. Novel approaches, combining different methods, are needed to use this data for making guided decisions. This paper proposes a methodology whereby parameters that most affect system performance are extracted from the data using data analytics methods. These parameters are used to develop scenarios for simulation inputs; system optimizations are performed on simulation data outputs. A case study of a machine shop demonstrates the proposed methodology. This paper also reviews candidate standards for data collection, simulation, and systems interfaces. PMID:28690363

VIKOR Method for Interval Neutrosophic Multiple Attribute Group Decision-Making

Directory of Open Access Journals (Sweden)

Yu-Han Huang

2017-11-01

Full Text Available In this paper, we will extend the VIKOR (VIsekriterijumska optimizacija i KOmpromisno Resenje method to multiple attribute group decision-making (MAGDM with interval neutrosophic numbers (INNs. Firstly, the basic concepts of INNs are briefly presented. The method first aggregates all individual decision-makers’ assessment information based on an interval neutrosophic weighted averaging (INWA operator, and then employs the extended classical VIKOR method to solve MAGDM problems with INNs. The validity and stability of this method are verified by example analysis and sensitivity analysis, and its superiority is illustrated by a comparison with the existing methods.

Identification of a Multicriteria Decision-Making Model Using the Characteristic Objects Method

Directory of Open Access Journals (Sweden)

Andrzej Piegat

2014-01-01

Full Text Available This paper presents a new, nonlinear, multicriteria, decision-making method: the characteristic objects (COMET. This approach, which can be characterized as a fuzzy reference model, determines a measurement standard for decision-making problems. This model is distinguished by a constant set of specially chosen characteristic objects that are independent of the alternatives. After identifying a multicriteria model, this method can be used to compare any number of decisional objects (alternatives and select the best one. In the COMET, in contrast to other methods, the rank-reversal phenomenon is not observed. Rank-reversal is a paradoxical feature in the decision-making methods, which is caused by determining the absolute evaluations of considered alternatives on the basis of the alternatives themselves. In the Analytic Hierarchy Process (AHP method and similar methods, when a new alternative is added to the original alternative set, the evaluation base and the resulting evaluations of all objects change. A great advantage of the COMET is its ability to identify not only linear but also nonlinear multicriteria models of decision makers. This identification is based not on a ranking of component criteria of the multicriterion but on a ranking of a larger set of characteristic objects (characteristic alternatives that are independent of the small set of alternatives analyzed in a given problem. As a result, the COMET is free of the faults of other methods.

A fuzzy MCDM model with objective and subjective weights for evaluating service quality in hotel industries

Science.gov (United States)

Zoraghi, Nima; Amiri, Maghsoud; Talebi, Golnaz; Zowghi, Mahdi

2013-12-01

This paper presents a fuzzy multi-criteria decision-making (FMCDM) model by integrating both subjective and objective weights for ranking and evaluating the service quality in hotels. The objective method selects weights of criteria through mathematical calculation, while the subjective method uses judgments of decision makers. In this paper, we use a combination of weights obtained by both approaches in evaluating service quality in hotel industries. A real case study that considered ranking five hotels is illustrated. Examples are shown to indicate capabilities of the proposed method.

A new method for making long-lived carbon stripper foils

International Nuclear Information System (INIS)

Sugai, Isao; Ishii, Sabro; Hattori, Toshiyuki; Muto, Hideshi; Takahashi, Yohsuke; Kato, Hajime; Yamazaki, Kuniaki.

1989-01-01

We have developed a new method for preparation of long-lived carbon stripper foils, based on the modification of our 'controlled DC arc-discharge method'. The carbon foils consist of multi-layers, and carbon particles in each layer are emitted from the electrode in AC arc-discharge or from the cathode electrode in DC arc-discharge. The lifetimes of the carbon foils made by the new method are equal to or longer than those prepared by the controlled DC arc-discharge method. The new method is simple and powerful to make long-lived carbon stripper foils with higher reliability and reproducibility than the previous method. (author)

Authentication of vegetable oils on the basis of their physico-chemical properties with the aid of chemometrics.

Science.gov (United States)

Zhang, Guowen; Ni, Yongnian; Churchill, Jane; Kokot, Serge

2006-09-15

In food production, reliable analytical methods for confirmation of purity or degree of spoilage are required by growers, food quality assessors, processors, and consumers. Seven parameters of physico-chemical properties, such as acid number, colority, density, refractive index, moisture and volatility, saponification value and peroxide value, were measured for quality and adulterated soybean, as well as quality and rancid rapeseed oils. Chemometrics methods were then applied for qualitative and quantitative discrimination and prediction of the oils by methods such exploratory principal component analysis (PCA), partial least squares (PLS), radial basis function-artificial neural networks (RBF-ANN), and multi-criteria decision making methods (MCDM), PROMETHEE and GAIA. In general, the soybean and rapeseed oils were discriminated by PCA, and the two spoilt oils behaved differently with the rancid rapeseed samples exhibiting more object scatter on the PC-scores plot, than the adulterated soybean oil. For the PLS and RBF-ANN prediction methods, suitable training models were devised, which were able to predict satisfactorily the category of the four different oil samples in the verification set. Rank ordering with the use of MCDM models indicated that the oil types can be discriminated on the PROMETHEE II scale. For the first time, it was demonstrated how ranking of oil objects with the use of PROMETHEE and GAIA could be utilized as a versatile indicator of quality performance of products on the basis of a standard selected by the stakeholder. In principle, this approach provides a very flexible method for assessment of product quality directly from the measured data.

Making Pictures as a Method of Teaching Art History

Science.gov (United States)

Martikainen, Jari

2017-01-01

Inspired by the affective and sensory turns in the paradigm of art history, this article discusses making pictures as a method of teaching art history in Finnish Upper Secondary Vocational Education and Training (Qualification in Visual Expression, Study Programmes in Visual and Media Arts and Photography). A total of 25 students majoring in…

Analysis and decision making method for radiation accident situation

International Nuclear Information System (INIS)

Jammet, H.; Hamard, J.

1975-01-01

Decisions on the application of countermeasures for accident situations must take into account the cost of these countermeasures and the feasibility of reducing the exposure. A contribution to the solution of this problem, rested on the application of the principle of choice rationalization and optimization of decision making method, is presented [fr

Perovskite electrodes and method of making the same

Science.gov (United States)

Seabaugh, Matthew M.; Swartz, Scott L.

2005-09-20

The invention relates to perovskite oxide electrode materials in which one or more of the elements Mg, Ni, Cu, and Zn are present as minority components that enhance electrochemical performance, as well as electrode products with these compositions and methods of making the electrode materials. Such electrodes are useful in electrochemical system applications such as solid oxide fuel cells, ceramic oxygen generation systems, gas sensors, ceramic membrane reactors, and ceramic electrochemical gas separation systems.

Pyrolytic carbon black composite and method of making the same

Energy Technology Data Exchange (ETDEWEB)

Naskar, Amit K.; Paranthaman, Mariappan Parans; Bi, Zhonghe

2016-09-13

A method of recovering carbon black includes the step of providing a carbonaceous source material containing carbon black. The carbonaceous source material is contacted with a sulfonation bath to produce a sulfonated material. The sulfonated material is pyrolyzed to produce a carbon black containing product comprising a glassy carbon matrix phase having carbon black dispersed therein. A method of making a battery electrode is also disclosed.

Analisis Kerentanan Pulau-Pulau Kecil di Kecamatan Togean Kabupaten Tojo Una Una Provinsi Sulawesi Tengah (Studi Kasus P. Kukumbi, P. Enam, P. Mogo, P. Kadidiri, P. Pagempa, P. Tongkabo

Directory of Open Access Journals (Sweden)

Mohamad Akbar

2017-04-01

Full Text Available This research was conducted in small islands area to Togean District, TojoUna-Una Regency Central Celebes by ecological and sosio-economic approach.  Methods those used in this research were vulnerability index, MCDM (multi criteria dimension making and Geographycal information system (SIG approach.  Data was collected bt participative and explorative approach.  Data analysed parameters using vulnerability, assessment method involved vulnerability variable parameters i.e. area characteristic, area degradation, sea level rise, human impact, economic exposure, economic remoteness.  The results shows the range ofcomposit vulnerability index for ecological (CVI-Ek is 0.00-0.77, economic (CVI-En is 0.00-0.75, and composite vulnerability ecological-economic (CVI-EE is 0.00-0.76.  Enam island (0.76and tongkabo island (0.66 is rated to high vulnerable (0.67, Mogo Island (0.14, Kukumbi Island (0.12, Pagempa Island (0.09 and Kadidiri Island (0.07, is considerednon vulnerable.  MCDM analysis result that is used to determine small island management model in Togean District, shows ecological criteria is most important compared with economy criteria and social criteria.  Analysis of SMART technique  shows the type small islands  sustainability management  scenario in Togean District, those are scenario A (adaptation, 0.94 and scenario B ( without adaptation, 0.55. Keywords : small island, composite vulnerability index, sustainability, togean district.

The application of outsourcing decision-making methods in a logistics context in South Africa

OpenAIRE

Naomi Bloem; Wilna L. Bean

2015-01-01

Background: Companies have often relinquished the control of important business functions to outside suppliers for the sake of short-term savings and because of the lack of use of proper decision-making methods within the business. Objectives: This article identified three methods of decision-making and applied it to a logistics outsourcing problem. The logistics outsourcing problem consisted of a make-or-buy decision as well as a supplier selection process. The purpose of the study was t...

Superdetonation devices and methods for making and using the same

Energy Technology Data Exchange (ETDEWEB)

McGrane, Shawn D.

2018-03-20

Disclosed herein are embodiments of devices comprising energetic materials capable of superdetonation and methods of making and using such devices. The devices disclosed herein comprise components, dimensions, and configurations optimized to utilize superdetonation velocities produced by the energetic materials disclosed herein.

A study on the effects of inter-organizational factors on the supply chain performance

Directory of Open Access Journals (Sweden)

Mohammad Mahdi Parhizgar

2012-10-01

Full Text Available In the current competitive environment, managers do their best to convert organizations under their supervision into competitive and responsive through creating capability of timely delivery of quality products and services. In the other word, they try to create value for their customers, which yield more profitability for stakeholders. In line with this, determining of inter-organizational factors and the relationships among these variables and supply chain performance plays an important role in achieving these objectives. The relationship modeling is a type of multiple criteria decision-making (MCDM problem, which requires applying experts to determine the relationships. The Decision Making Trial and Evaluation Laboratory (DEMATEL is an MCDM tool, which not only can convert the relationships among cause and effect criteria into a visual structural framework, but also it can be used as a technique to handle the inner dependences within a set of criteria. This paper proposes an effective solution based on DEMATEL approach to help managers evaluate the relationships between inter-organizational factors and supply chain performance.

Structures for capturing CO.sub.2, methods of making the structures, and methods of capturing CO.sub.2

Science.gov (United States)

Jones, Christopher W; Hicks, Jason C; Fauth, Daniel J; McMahan, Gray

2012-10-30

Briefly described, embodiments of this disclosure, among others, include carbon dioxide (CO.sub.2) sorption structures, methods of making CO.sub.2 sorption structures, and methods of using CO.sub.2 sorption structures.

Materials For Gas Capture, Methods Of Making Materials For Gas Capture, And Methods Of Capturing Gas

KAUST Repository

Polshettiwar, Vivek

2013-06-20

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure, in one aspect, relate to materials that can be used for gas (e.g., CO.sub.2) capture, methods of making materials, methods of capturing gas (e.g., CO.sub.2), and the like, and the like.

A Novel Group Decision-Making Method Based on Sensor Data and Fuzzy Information.

Science.gov (United States)

Bai, Yu-Ting; Zhang, Bai-Hai; Wang, Xiao-Yi; Jin, Xue-Bo; Xu, Ji-Ping; Su, Ting-Li; Wang, Zhao-Yang

2016-10-28

Algal bloom is a typical phenomenon of the eutrophication of rivers and lakes and makes the water dirty and smelly. It is a serious threat to water security and public health. Most scholars studying solutions for this pollution have studied the principles of remediation approaches, but few have studied the decision-making and selection of the approaches. Existing research uses simplex decision-making information which is highly subjective and uses little of the data from water quality sensors. To utilize these data and solve the rational decision-making problem, a novel group decision-making method is proposed using the sensor data with fuzzy evaluation information. Firstly, the optimal similarity aggregation model of group opinions is built based on the modified similarity measurement of Vague values. Secondly, the approaches' ability to improve the water quality indexes is expressed using Vague evaluation methods. Thirdly, the water quality sensor data are analyzed to match the features of the alternative approaches with grey relational degrees. This allows the best remediation approach to be selected to meet the current water status. Finally, the selection model is applied to the remediation of algal bloom in lakes. The results show this method's rationality and feasibility when using different data from different sources.

Troger's base-based monomers, and polymers, methods of making and uses thereof

KAUST Repository

Ma, Xiaohua; Pinnau, Ingo

2017-01-01

Embodiments of the present disclosure provide compounds derived by Troger's amine as shown below, microporous structures, membranes, methods of making said compounds, structures, and membranes, methods of use for gas separation, and the like (Formula A1).

Glass-ceramic material and method of making

Science.gov (United States)

Meinhardt, Kerry D [Richland, WA; Vienna, John D [West Richland, WA; Armstrong, Timothy R [Pasco, WA; Pederson, Larry R [Kennewick, WA

2002-08-13

The present invention is a glass-ceramic material and method of making useful for joining at least two solid ceramic parts. The seal is a blend of M.sub.A O--M.sub.B O.sub.y --SiO.sub.2 that substantially matches a coefficient of thermal expansion of the solid electrolyte. According to the present invention, a series of glass ceramics in the M.sub.A O--M.sub.B O.sub.y --SiO.sub.2 system can be used to join or seal both tubular and planar ceramic solid oxide fuel cells, oxygen electrolyzers, and membrane reactors for the production of syngas, commodity chemicals and other products.

Troger's base-based monomers, and polymers, methods of making and uses thereof

KAUST Repository

Ma, Xiaohua

2017-12-28

Embodiments of the present disclosure provide compounds derived by Troger\\'s amine as shown below, microporous structures, membranes, methods of making said compounds, structures, and membranes, methods of use for gas separation, and the like (Formula A1).

The Role of Heuristic Methods as a Decision-Making Tool in Aggregate Production Planning

OpenAIRE

Mahmood B. Ridha

2015-01-01

This study aims to explain the role of heuristic methods in the decision making process and as a tool for knowledge capture. As a result, we conclude that heuristic methods give better support to the decision maker than mathematical models in many cases especially when time and cost are critical factors in decision making.

How knowledge influences a MCDM analysis: WOCAT Portuguese experience on prevention of forest fires

Science.gov (United States)

Carreiras, M.; Ferreira, A. J. D.; Moreira, J.; Esteves, T. C. J.; Valente, S.; Soares, J.; Coelho, C. O. A.; Schwilch, G.; Bachmann, F.

2012-04-01

Forest management is a major concern for land managers due to its impact on biomass production, surface water quality or landscape beauty. Pursuing the development of a holistic view of the issue (considering economic, environmental and social aspects), an appreciation of the variety policies and techniques is considered essential due to its importance in the context of sustainability. It this context, MCDM could be an important tool on the establishment for the use of the forest. It could be used for exploiting the preferences of decision-makers, stakeholders, or environmental experts obtaining economic values for impacts whose monetization remains problematic. WOCAT has developed a framework for Sustainable Land Management knowledge, covering all steps from data collection, database implementation and decision support. WOCAT methodology allows the environmental risks knowledge and also stakeholder's participation and involvement. It leads to the discussion of issues of the territory and through a participatory, integrative, holistic and impartial process, it identifies environmental problems. In the end guidelines / actions for the territory are settled based on the problems identified. Having an active participatory nature, this process reveals itself as an excellent public participation process. The methodology also brings the territory's decision-makers in contact with the stakeholders. The procedure for identification, assessment and selection of strategies has been developed by the EU project DESIRE in collaboration with WOCAT. The methodology was tested by DESIRE in 16 study sites around the world. As an outcome of the procedure, the methodology may serve as a basis for prioritizing land-use policies, conservation measures and research at a national level. It integrates several exercises for prioritizing land-use policies, conservation measures and research at a regional and national level. In Portugal, forest fires are one of the major factors of land

Micro-and/or nano-scale patterned porous membranes, methods of making membranes, and methods of using membranes

KAUST Repository

Wang, Xianbin; Chen, Wei; Wang, Zhihong; Zhang, Xixiang; Yue, Weisheng; Lai, Zhiping

2015-01-01

Embodiments of the present disclosure provide for materials that include a pre-designed patterned, porous membrane (e.g., micro- and/or nano-scale patterned), structures or devices that include a pre-designed patterned, porous membrane, methods of making pre-designed patterned, porous membranes, methods of separation, and the like.

Micro-and/or nano-scale patterned porous membranes, methods of making membranes, and methods of using membranes

KAUST Repository

Wang, Xianbin

2015-01-22

Embodiments of the present disclosure provide for materials that include a pre-designed patterned, porous membrane (e.g., micro- and/or nano-scale patterned), structures or devices that include a pre-designed patterned, porous membrane, methods of making pre-designed patterned, porous membranes, methods of separation, and the like.

Deciding on child maltreatment: A literature review on methods that improve decision-making.

Science.gov (United States)

Bartelink, Cora; van Yperen, Tom A; ten Berge, Ingrid J

2015-11-01

Assessment and decision-making in child maltreatment cases is difficult. Practitioners face many uncertainties and obstacles during their assessment and decision-making process. Research exhibits shortcomings in this decision-making process. The purpose of this literature review is to identify and discuss methods to overcome these shortcomings. We conducted a systematic review of the published literature on decision-making using PsychINFO and MEDLINE from 2000 through May 2014. We included reviews and quantitative research studies that investigated methods aimed at improving professional decision-making on child abuse and neglect in child welfare and child protection. Although many researchers have published articles on decision-making including ideas and theories to improve professional decision-making, empirical research on these improvements is scarce. Available studies have shown promising results. Structured decision-making has created a greater child-centred and holistic approach that takes the child's family and environment into account, which has made practitioners work more systematically and improved the analysis of complex situations. However, this approach has not improved inter-rater agreement on decisions made. Shared decision-making may improve the participation of parents and children and the quality of decisions by taking client treatment preferences into account in addition to scientific evidence and clinical experience. A number of interesting developments appear in recent research literature; however, child welfare and child protection must find additional inspiration from other areas, e.g., mental health services, because research on decision-making processes in child welfare and child protection is still rare. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of Cloud Services: A Fuzzy Multi-Criteria Group Decision Making Method

Directory of Open Access Journals (Sweden)

Santoso Wibowo

2016-12-01

Full Text Available This paper presents a fuzzy multi-criteria group decision making method for evaluating the performance of Cloud services in an uncertain environment. Intuitionistic fuzzy numbers are used to better model the subjectivity and imprecision in the performance evaluation process. An effective algorithm is developed based on the technique for order preference by similarity to the ideal solution and the Choquet integral operator for adequately solving the performance evaluation problem. An example is presented for demonstrating the applicability of the proposed method for solving the multi-criteria group decision making problem in real situations.

Heuristic Method for Decision-Making in Common Scheduling Problems

Directory of Open Access Journals (Sweden)

Edyta Kucharska

2017-10-01

Full Text Available The aim of the paper is to present a heuristic method for decision-making regarding an NP-hard scheduling problem with limitations related to tasks and the resources dependent on the current state of the process. The presented approach is based on the algebraic-logical meta-model (ALMM, which enables making collective decisions in successive process stages, not separately for individual objects or executors. Moreover, taking into account the limitations of the problem, it involves constructing only an acceptable solution and significantly reduces the amount of calculations. A general algorithm based on the presented method is composed of the following elements: preliminary analysis of the problem, techniques for the choice of decision at a given state, the pruning non-perspective trajectory, selection technique of the initial state for the trajectory final part, and the trajectory generation parameters modification. The paper includes applications of the presented approach to scheduling problems on unrelated parallel machines with a deadline and machine setup time dependent on the process state, where the relationship between tasks is defined by the graph. The article also presents the results of computational experiments.

A hybrid multiple attribute decision making method for solving problems of industrial environment

Directory of Open Access Journals (Sweden)

Dinesh Singh

2011-01-01

Full Text Available The selection of appropriate alternative in the industrial environment is an important but, at the same time, a complex and difficult problem because of the availability of a wide range of alternatives and similarity among them. Therefore, there is a need for simple, systematic, and logical methods or mathematical tools to guide decision makers in considering a number of selection attributes and their interrelations. In this paper, a hybrid decision making method of graph theory and matrix approach (GTMA and analytical hierarchy process (AHP is proposed. Three examples are presented to illustrate the potential of the proposed GTMA-AHP method and the results are compared with the results obtained using other decision making methods.

Optimization of warehouse location through fuzzy multi-criteria decision making methods

Directory of Open Access Journals (Sweden)

C. L. Karmaker

2015-07-01

Full Text Available Strategic warehouse location-allocation problem is a multi-staged decision-making problem having both numerical and qualitative criteria. In order to survive in the global business scenario by improving supply chain performance, companies must examine the cross-functional drivers in the optimization of logistic systems. A meticulous observation makes evident that strategy warehouse location selection has become challenging as the number of alternatives and conflicting criteria increases. The issue becomes particularly problematic when the conventional concept has been applied in dealing with the imprecise nature of the linguistic assessment. The qualitative decisions for selection process are often complicated by the fact that often it is imprecise for the decision makers. Such problem must be overcome with defined efforts. Fuzzy multi-criteria decision making methods have been used in this research as aids in making location-allocation decisions. The anticipated methods in this research consist of two steps at its core. In the first step, the criteria of the existing problem are inspected and identified and then the weights of the sector and subsector are determined that have come to light by using Fuzzy AHP. In the second step, eligible alternatives are ranked by using TOPSIS and Fuzzy TOPSIS comparatively. A demonstration of the application of these methodologies in a real life problem is presented.

EVALUATION OF SERVICE QUALITY OF AIRWAY COMPANIES GIVING DOMESTIC SERVICES IN TURKEY WITH FUZZY SET APPROACH

Directory of Open Access Journals (Sweden)

H. Handan DEMIR

2013-01-01

Full Text Available Today, service quality has become a major phenomenon with the requirement of meeting consumer demands in the best way brought along with the rising competition between companies. Airway transportation is preferred more and more during the recent years. Many qualitative and quantitative criteria are considered while evaluating service criteria in airway transportation. In this context, evaluation of service quality is a decisionmaking problem with many criteria. The purpose of this study is to evaluate service quality of domestic airway companies in Turkey. In this study; fuzzy TOPSIS method which is one of the most preferred fuzzy MCDM methods, extension of multi criteria decision making methods in fuzzy environments, considering qualitative and quantitative criteria together and giving opportunity to make group decisions in fuzzy environments. As a result, evaluation was made based on service quality criteria for the most preferred airways companies in Turkey and these companies were ranked according to their levels of service quality.

Cermets and method for making same

Science.gov (United States)

Aaron, W. Scott; Kinser, Donald L.; Quinby, Thomas C.

1983-01-01

The present invention is directed to a method for making a wide variety of general-purpose cermets and for radioactive waste disposal from ceramic powders prepared from urea-dispersed solutions containing various metal values. The powders are formed into a compact and subjected to a rapid temperature increase in a reducing atmosphere. During this reduction, one or more of the more readily reducible oxides in the compact is reduced to a selected substoichiometric state at a temperature below the eutectic phase for that particular oxide or oxides and then raised to a temperature greater than the eutectic temperature to provide a liquid phase in the compact prior to the reduction of the liquid phase forming oxide to solid metal. This liquid phase forms at a temperature below the melting temperature of the metal and bonds together the remaining particulates in the cermet to form a solid polycrystalline cermet.

Cesium titanium silicate and method of making

Science.gov (United States)

Balmer, Mari L.

1997-01-01

The invention is the new material, a ternary compound of cesium, silica, and titania, together with a method of making the ternary compound, cesium titanium silicate pollucite. More specifically, the invention is Cs.sub.2 Ti.sub.2 Si.sub.4 O.sub.13 pollucite which is a new crystalline phase representing a novel class of Ti-containing zeolites. Compositions contain relatively high Cs.sub.2 O and TiO.sub.2 loadings and are durable glass and ceramic materials. The amount of TiO.sub.2 and Cs.sub.2 that can be incorporated into these glasses and crystalline ceramics far exceeds the limits set for the borosilicate high level waste glass.

Risky Group Decision-Making Method for Distribution Grid Planning

Science.gov (United States)

Li, Cunbin; Yuan, Jiahang; Qi, Zhiqiang

2015-12-01

With rapid speed on electricity using and increasing in renewable energy, more and more research pay attention on distribution grid planning. For the drawbacks of existing research, this paper proposes a new risky group decision-making method for distribution grid planning. Firstly, a mixing index system with qualitative and quantitative indices is built. On the basis of considering the fuzziness of language evaluation, choose cloud model to realize "quantitative to qualitative" transformation and construct interval numbers decision matrices according to the "3En" principle. An m-dimensional interval numbers decision vector is regarded as super cuboids in m-dimensional attributes space, using two-level orthogonal experiment to arrange points uniformly and dispersedly. The numbers of points are assured by testing numbers of two-level orthogonal arrays and these points compose of distribution points set to stand for decision-making project. In order to eliminate the influence of correlation among indices, Mahalanobis distance is used to calculate the distance from each solutions to others which means that dynamic solutions are viewed as the reference. Secondly, due to the decision-maker's attitude can affect the results, this paper defines the prospect value function based on SNR which is from Mahalanobis-Taguchi system and attains the comprehensive prospect value of each program as well as the order. At last, the validity and reliability of this method is illustrated by examples which prove the method is more valuable and superiority than the other.

Transshipment site selection using the AHP and TOPSIS approaches under fuzzy environment

International Nuclear Information System (INIS)

Onuet, Semih; Soner, Selin

2008-01-01

Site selection is an important issue in waste management. Selection of the appropriate solid waste site requires consideration of multiple alternative solutions and evaluation criteria because of system complexity. Evaluation procedures involve several objectives, and it is often necessary to compromise among possibly conflicting tangible and intangible factors. For these reasons, multiple criteria decision-making (MCDM) has been found to be a useful approach to solve this kind of problem. Different MCDM models have been applied to solve this problem. But most of them are basically mathematical and ignore qualitative and often subjective considerations. It is easier for a decision-maker to describe a value for an alternative by using linguistic terms. In the fuzzy-based method, the rating of each alternative is described using linguistic terms, which can also be expressed as triangular fuzzy numbers. Furthermore, there have not been any studies focused on the site selection in waste management using both fuzzy TOPSIS (technique for order preference by similarity to ideal solution) and AHP (analytical hierarchy process) techniques. In this paper, a fuzzy TOPSIS based methodology is applied to solve the solid waste transshipment site selection problem in Istanbul, Turkey. The criteria weights are calculated by using the AHP

Biocompatible implants and methods of making and attaching the same

Energy Technology Data Exchange (ETDEWEB)

Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

2014-10-07

The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

AHP IN IMPLEMENTATION OF BALANCED SCORECARD

Directory of Open Access Journals (Sweden)

Jelena Jovanovic

2015-11-01

Full Text Available BSC as a matrix of balanced indicators gives a review of organization activities within four or more perspectives (fields (finance, users, business processes, learning and development where by necessary conditions for development and continual improvement are created. As BSC is essentially a frame for realization of defined strategy in the organization, its implementation asks for an adequate choice of measures-indicators and therefore this paper is oriented towards importance and methodology of the choice of indicators. This paper particularly emphasizes a possibility of implementation of AHP (Analytic Hierarchy Process and ANP (Analytic Network Process as methods of multi-criteria decision-making (MCDM inmplementation of BSC.

Data-Based Decision-Making: Developing a Method for Capturing Teachers' Understanding of CBM Graphs

Science.gov (United States)

Espin, Christine A.; Wayman, Miya Miura; Deno, Stanley L.; McMaster, Kristen L.; de Rooij, Mark

2017-01-01

In this special issue, we explore the decision-making aspect of "data-based decision-making". The articles in the issue address a wide range of research questions, designs, methods, and analyses, but all focus on data-based decision-making for students with learning difficulties. In this first article, we introduce the topic of…

Temperature sensitive surfaces and methods of making same

Science.gov (United States)

Liang, Liang [Richland, WA; Rieke, Peter C [Pasco, WA; Alford, Kentin L [Pasco, WA

2002-09-10

Poly-n-isopropylacrylamide surface coatings demonstrate the useful property of being able to switch charateristics depending upon temperature. More specifically, these coatings switch from being hydrophilic at low temperature to hydrophobic at high temperature. Research has been conducted for many years to better characterize and control the properties of temperature sensitive coatings. The present invention provides novel temperature sensitive coatings on articles and novel methods of making temperature sensitive coatings that are disposed on the surfaces of various articles. These novel coatings contain the reaction products of n-isopropylacrylamide and are characterized by their properties such as advancing contact angles. Numerous other characteristics such as coating thickness, surface roughness, and hydrophilic-to-hydrophobic transition temperatures are also described. The present invention includes articles having temperature-sensitve coatings with improved properties as well as improved methods for forming temperature sensitive coatings.

A method for analysis of nuclear power plant operators' decision making in simulated disturbance situations

International Nuclear Information System (INIS)

1995-01-01

An analysis method has been developed for analysis of nuclear power plant operators' decision making in simulated disturbance situations. The aim of the analysis is to investigate operators' orientation which is expected to manifest itself as collective strategies in utilization of resources of decision making. Resources analyzed here are different information sources and, in addition, collaborative resources like communication and participation. The cognitive approach on the basis of the method considers decision making as collective construction of common interpretation of available information. Utilization of information is evaluated with respect to operative context. This is made with help of conceptualization of the disturbance situation from the decision making point of view and by construction of operative reference for activity. The latter means conceptualization of the situation from the safety point of view and also consideration of other boundary constraints of decision making, i.e. economical and technical aspects. The analysis method is intended to be used in routine simulator training in nuclear power plants. By virtue of its contextual and dynamical approach it makes the developing nature of activity visible. Cumulation and distribution of knowledge of decision making as developing activity, controlled by orientation and boundary constraints of process control, is expected to improve operational culture of a plant organization. (author). 2 refs, 1 fig

An integrated approach for solving a MCDM problem, Combination of Entropy Fuzzy and F-PROMETHEE techniques

Directory of Open Access Journals (Sweden)

Amin Shahmardan

2013-09-01

Full Text Available Purpose: The intention of this paper is the presentation of a new integrated approach for solving a multi attribute decision making problem by the use of Entropy Fuzzy and F- PROMETHEE (fuzzy preference ranking method for enrichment evaluation techniques. Design/methodology/approach: In these sorts of multi attribute decision making problem, a number of criteria and alternatives are put forward as input data. Ranking of these alternatives according to mentioned criteria is regarded as the outcome of solving these kinds of problems. Initially, weights of criteria are determined by implementation of Entropy Fuzzy method. According to determined weights, F-PROMETHEE method is exerted to rank these alternatives in terms of desirability of DM (decision maker. Findings: Being in an uncertain environment and vagueness of DM’s judgments, lead us to implement an algorithm which can deal with these constraints properly. This technique namely called Entropy Fuzzy as a weighting method and F-PROMETHEE is performed to fulfill this approach more precisely according to tangible and intangible aspects. The main finding of applied approach is the final ranking of alternatives helping DM to have a more reliable decision. Originality/Value: The main contribution of this approach is the giving real significance to DM’s attitudes about mentioned criteria in determined alternatives which is not elucidate in former approaches like Analytical Hierarchy Process (AHP. Furthermore, previous methods like Shanon Entropy do not pay attention sufficiently to satisfaction degree of each criterion in proposed alternatives, regarding to DM’s statements. Comprehensive explanations about these procedures have been made in miscellaneous sections of this article.

Methods of making membrane electrode assemblies

Science.gov (United States)

Kim, Yu Seung; Lee, Kwan -Soo; Rockward, Tommy Q. T.

2015-07-28

Method of making a membrane electrode assembly comprising: providing a membrane comprising a perfluorinated sulfonic acid; providing a first transfer substrate; applying to a surface of the first transfer substrate a first ink, said first ink comprising an ionomer and a catalyst; applying to the first ink a suitable non-aqueous swelling agent; forming an assembly comprising: the membrane; and the first transfer substrate, wherein the surface of the first transfer substrate comprising the first ink and the non-aqueous swelling agent is disposed upon one surface of the membrane; and heating the assembly at a temperature of 150.degree. C. or less and at a pressure of from about 250 kPa to about 3000 kPa or less for a time suitable to allow substantially complete transfer of the first ink and the second ink to the membrane; and cooling the assembly to room temperature and removing the first transfer substrate and the second transfer substrate.

Election of water resources management entity using a multi-criteria decision (MCD method in Salta province (Argentine

Directory of Open Access Journals (Sweden)

Juan B. Grau

2009-08-01

Full Text Available At present, the water resources are a strategic element, each time more necessary and limited becoming a source of conflicts. For that, it is fundamental to create an independent and competent entity with good reputation and social acceptation. This entity, must be able to obtain, store and process all data dispersed in different entities creating a network for these purposes. Finally, it must be able to organize different branches between the government and the final users. Using one of the well-known Multicriteria Decision Methods (MCDM with several realistic alternatives and several criteria identified in expert seminars in Salta and Madrid, we have obtained hopeful results and more recently, new modifications introduced have generated better results.

Materials For Gas Capture, Methods Of Making Materials For Gas Capture, And Methods Of Capturing Gas

KAUST Repository

Polshettiwar, Vivek; Patil, Umesh

2013-01-01

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure, in one aspect, relate to materials that can be used for gas (e.g., CO.sub.2) capture, methods of making

A Review of Multi-Criteria Decision-Making Methods Applied to the Sustainable Bridge Design

Directory of Open Access Journals (Sweden)

Vicent Penadés-Plà

2016-12-01

Full Text Available The construction of bridges has been necessary for societies since ancient times, when the communication between and within towns, cities or communities was established. Until recently, the economic factor has been the only one considered in the decision-making of any type of construction process for bridges. However, nowadays, the objective should not be just the construction of bridges, but of sustainable bridges. Economic, social and environmental factors, which form the three pillars of sustainability, have been recently added. These three factors usually have conflicting perspectives. The decision-making process allows the conversion of a judgment into a rational procedure to reach a compromise solution. The aim of this paper is to review different methods and sustainable criteria used for decision-making at each life-cycle phase of a bridge, from design to recycling or demolition. This paper examines 77 journal articles for which different methods have been used. The most used methods are briefly described. In addition, a statistical study was carried out on the Multiple Attribute Decision-making papers reviewed.

Method for making photovoltaic devices using oxygenated semiconductor thin film layers

Science.gov (United States)

Johnson, James Neil; Albin, David Scott; Feldman-Peabody, Scott; Pavol, Mark Jeffrey; Gossman, Robert Dwayne

2014-12-16

A method for making a photovoltaic device is presented. The method includes steps of disposing a window layer on a substrate and disposing an absorber layer on the window layer. Disposing the window layer, the absorber layer, or both layers includes introducing a source material into a deposition zone, wherein the source material comprises oxygen and a constituent of the window layer, of the absorber layer or of both layers. The method further includes step of depositing a film that comprises the constituent and oxygen.

Use of Model-Based Design Methods for Enhancing Resiliency Analysis of Unmanned Aerial Vehicles

Science.gov (United States)

Knox, Lenora A.

The most common traditional non-functional requirement analysis is reliability. With systems becoming more complex, networked, and adaptive to environmental uncertainties, system resiliency has recently become the non-functional requirement analysis of choice. Analysis of system resiliency has challenges; which include, defining resilience for domain areas, identifying resilience metrics, determining resilience modeling strategies, and understanding how to best integrate the concepts of risk and reliability into resiliency. Formal methods that integrate all of these concepts do not currently exist in specific domain areas. Leveraging RAMSoS, a model-based reliability analysis methodology for Systems of Systems (SoS), we propose an extension that accounts for resiliency analysis through evaluation of mission performance, risk, and cost using multi-criteria decision-making (MCDM) modeling and design trade study variability modeling evaluation techniques. This proposed methodology, coined RAMSoS-RESIL, is applied to a case study in the multi-agent unmanned aerial vehicle (UAV) domain to investigate the potential benefits of a mission architecture where functionality to complete a mission is disseminated across multiple UAVs (distributed) opposed to being contained in a single UAV (monolithic). The case study based research demonstrates proof of concept for the proposed model-based technique and provides sufficient preliminary evidence to conclude which architectural design (distributed vs. monolithic) is most resilient based on insight into mission resilience performance, risk, and cost in addition to the traditional analysis of reliability.

77 FR 51046 - Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same; Notice...

Science.gov (United States)

2012-08-23

... INTERNATIONAL TRADE COMMISSION [Docket No. 2908] Certain Sintered Rare Earth Magnets, Methods of... Certain Sintered Rare Earth Magnets, Methods of Making Same and Products Containing Same, DN 2908; the..., methods of making same and products [[Page 51047

Avaliação de transportadoras de materiais perigosos utilizando o método electre tri The eletre tri method applied to the evaluation of companies transporting hazardous materials

Directory of Open Access Journals (Sweden)

Helder Gomes Costa

2004-08-01

Full Text Available Neste trabalho apresenta-se uma metodologia para a classificação e escolha de prestadores de serviço para transporte de materiais perigosos, fundamentado na metodologia de Auxílio Multicritério à Decisão - AMD. A metodologia aqui proposta apresenta características que permitem considerar a subjetividade inerente ao processo de avaliação de desempenho dos Prestadores de Serviço, diferenciando-se, assim, de outros métodos de seleção de fornecedores de serviços de transportes. As particularidades da metodologia proposta, principalmente em relação à sua aplicabilidade, foram verificadas num caso em uma empresa distribuidora de combustíveis, com rede de postos em todo o Brasil.This article proposes a method for the classification and selection of hazardous materials transporters based on Multicriteria Decision Making (MCDM concepts. This approach involves characteristics that allow the subjectivity inherent to the process of evaluating the performance of Service Companies to be considered, thus differentiating it from other transport services supplier selection methods. The particularities of the proposed methodology, particularly insofar as its applicability is concerned, were assessed by means of a case study involving a fuel distribution company which owns gas stations throughout the country.

Method of making a low energy gamma ray collimator

International Nuclear Information System (INIS)

Muehllehner, Gerd.

1975-01-01

Described herein is a method for making a low energy gamma ray collimator which involves corrugating lead foil strips by passing them through pinion wire rollers and gluing corrugated strips between straight strips using an adhesive such as epoxy to build up a honeycomb-like structure. A thin aluminum sheet is glued to both edges of the strips to protect them and to provide a more rigid assembly which may be sawed to a desired shape. (Patent Office Record)

A quantitative method for evaluating alternatives. [aid to decision making

Science.gov (United States)

Forthofer, M. J.

1981-01-01

When faced with choosing between alternatives, people tend to use a number of criteria (often subjective, rather than objective) to decide which is the best alternative for them given their unique situation. The subjectivity inherent in the decision-making process can be reduced by the definition and use of a quantitative method for evaluating alternatives. This type of method can help decision makers achieve degree of uniformity and completeness in the evaluation process, as well as an increased sensitivity to the factors involved. Additional side-effects are better documentation and visibility of the rationale behind the resulting decisions. General guidelines for defining a quantitative method are presented and a particular method (called 'hierarchical weighted average') is defined and applied to the evaluation of design alternatives for a hypothetical computer system capability.

A Training Method to Improve Police Use of Force Decision Making

Directory of Open Access Journals (Sweden)

Judith P. Andersen

2016-04-01

Full Text Available Police safety and use of force decisions during critical incidents are an ongoing source of concern for both police practitioners and the public. Prior research in the area of police performance reveals that psychological and physiological stress responses during critical incidents can shape the outcome of the incident, either positively or negatively. The goal of this study was to test a training method to improve use of force decision making among police. This randomized controlled pilot study consisted of training officers to apply techniques to enhance psychological and physiological control during stressful critical incidents. Of a pool of 80 police officers, potential participants were invited based on equivalent age, years of experience, physiological characteristics (i.e., body mass index [BMI] and cardiovascular reactivity, and expertise. Results revealed that the intervention group displayed significantly better physiological control, situational awareness, and overall performance, and made a greater number of correct use of force decisions than officers in the control group (all ps < .01. The relevant improvements in use of force decision-making found in this pilot study indicate that this training method warrants further investigation. Improved use of force decision making directly translates into potential lifesaving decisions for police and the civilians they are working with.

A Novel Group Decision-Making Method Based on Sensor Data and Fuzzy Information

Directory of Open Access Journals (Sweden)

Yu-Ting Bai

2016-10-01

Full Text Available Algal bloom is a typical phenomenon of the eutrophication of rivers and lakes and makes the water dirty and smelly. It is a serious threat to water security and public health. Most scholars studying solutions for this pollution have studied the principles of remediation approaches, but few have studied the decision-making and selection of the approaches. Existing research uses simplex decision-making information which is highly subjective and uses little of the data from water quality sensors. To utilize these data and solve the rational decision-making problem, a novel group decision-making method is proposed using the sensor data with fuzzy evaluation information. Firstly, the optimal similarity aggregation model of group opinions is built based on the modified similarity measurement of Vague values. Secondly, the approaches’ ability to improve the water quality indexes is expressed using Vague evaluation methods. Thirdly, the water quality sensor data are analyzed to match the features of the alternative approaches with grey relational degrees. This allows the best remediation approach to be selected to meet the current water status. Finally, the selection model is applied to the remediation of algal bloom in lakes. The results show this method’s rationality and feasibility when using different data from different sources.

Companies Credit Risk Assessment Methods for Investment Decision Making

Directory of Open Access Journals (Sweden)

Dovilė Peškauskaitė

2017-06-01

Full Text Available As the banks have tightened lending requirements, companies look for alternative sources of external funding. One of such is bonds issue. Unfortunately, corporate bonds issue as a source of funding is rare in Lithuania. This occurs because companies face with a lack of information, investors fear to take on credit risk. Credit risk is defined as a borrower’s failure to meet its obligation. Investors, in order to avoid credit risk, have to assess the state of the companies. The goal of the article is to determine the most informative methods of credit risk assessment. The article summarizes corporate lending sources, analyzes corporate default causes and credit risk assessment methods. The study based on the SWOT analysis shows that investors before making an investment decision should evaluate both the business risk,using qualitative method CAMPARI, and the financial risk, using financial ratio analysis.

New Multi-Criteria Group Decision-Making Method Based on Vague Set Theory

OpenAIRE

Kuo-Sui Lin

2016-01-01

In light of the deficiencies and limitations for existing score functions, Lin has proposed a more effective and reasonable new score function for measuring vague values. By using Lin’s score function and a new weighted aggregation score function, an algorithm for multi-criteria group decision-making method was proposed to solve vague set based group decision-making problems under vague environments. Finally, a numerical example was illustrated to show the effectiveness of the proposed multi-...

Dark matter halos with cores from hierarchical structure formation

International Nuclear Information System (INIS)

Strigari, Louis E.; Kaplinghat, Manoj; Bullock, James S.

2007-01-01

We show that dark matter emerging from late decays (z or approx. 0.1 Mpc), and simultaneously generates observable constant-density cores in small dark matter halos. We refer to this class of models as meta-cold dark matter (mCDM), because it is born with nonrelativistic velocities from the decays of cold thermal relics. The constant-density cores are a result of the low phase-space density of mCDM at birth. Warm dark matter cannot produce similar size phase-space limited cores without saturating the Lyα power spectrum bounds. Dark matter-dominated galaxy rotation curves and stellar velocity dispersion profiles may provide the best means to discriminate between mCDM and CDM. mCDM candidates are motivated by the particle spectrum of supersymmetric and extra dimensional extensions to the standard model of particle physics

Decision-making and problem-solving methods in automation technology

Science.gov (United States)

Hankins, W. W.; Pennington, J. E.; Barker, L. K.

1983-01-01

The state of the art in the automation of decision making and problem solving is reviewed. The information upon which the report is based was derived from literature searches, visits to university and government laboratories performing basic research in the area, and a 1980 Langley Research Center sponsored conferences on the subject. It is the contention of the authors that the technology in this area is being generated by research primarily in the three disciplines of Artificial Intelligence, Control Theory, and Operations Research. Under the assumption that the state of the art in decision making and problem solving is reflected in the problems being solved, specific problems and methods of their solution are often discussed to elucidate particular aspects of the subject. Synopses of the following major topic areas comprise most of the report: (1) detection and recognition; (2) planning; and scheduling; (3) learning; (4) theorem proving; (5) distributed systems; (6) knowledge bases; (7) search; (8) heuristics; and (9) evolutionary programming.

Recombinant cells and organisms having persistent nonstandard amino acid dependence and methods of making them

Science.gov (United States)

Church, George M.; Mandell, Daniel J.; Lajoie, Marc J.

2017-12-05

Recombinant cells and recombinant organisms persistently expressing nonstandard amino acids (NSAAs) are provided. Methods of making recombinant cells and recombinant organisms dependent on persistently expressing NSAAs for survival are also provided. These methods may be used to make safe recombinant cells and recombinant organisms and/or to provide a selective pressure to maintain one or more reassigned codon functions in recombinant cells and recombinant organisms.

Hybrid Decision-making Method for Emergency Response System of Unattended Train Operation Metro

Directory of Open Access Journals (Sweden)

Bobo Zhao

2016-04-01

Full Text Available Suitable selection of the emergency alternatives is a critical issue in emergency response system of Unattended Train Operation (UTO metro system of China. However, there is no available method for dispatcher group in Operating Control Center (OCC to evaluate the decision under emergency situation. It was found that the emergency decision making in UTO metro system is relative with the preferences and the importance of multi-dispatcher in emergency. Regarding these factors, this paper presents a hybrid method to determinate the priority weights of emergency alternatives, which aggregates the preference matrix by constructing the emergency response task model based on the Weighted Ordered Weighted Averaging (WOWA operator. This calculation approach derives the importance weights depending on the dispatcher emergency tasks and integrates it into the Ordered Weighted Averaging (OWA operator weights based on a fuzzy membership relation. A case from train fire is given to demonstrate the feasibility and practicability of the proposed methods for Group Multi-Criteria Decision Making (GMCDM in emergency management of UTO metro system. The innovation of this research is paving the way for a systematic emergency decision-making solution which connects the automatic metro emergency response system with the GMCDM theory.

Low Carbon Supplier Selection in the Hotel Industry

Directory of Open Access Journals (Sweden)

Chia-Wei Hsu

2014-05-01

Full Text Available This study presents a model for evaluating the carbon and energy management performance of suppliers by using multiple-criteria decision-making (MCDM. By conducting a literature review and gathering expert opinions, 10 criteria on carbon and energy performance were identified to evaluate low carbon suppliers using the Fuzzy Delphi Method (FDM. Subsequently, the decision-making trial and evaluation laboratory (DEMATEL method was used to determine the importance of evaluation criteria in selecting suppliers and the causal relationships between them. The DEMATEL-based analytic network process (DANP and VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR were adopted to evaluate the weights and performances of suppliers and to obtain a solution under each evaluation criterion. An illustrative example of a hotel company was presented to demonstrate how to select a low carbon supplier according to carbon and energy management. The proposed hybrid model can help firms become effective in facilitating low carbon supply chains in hotels.

Method of making imbalanced compensated drill bit

International Nuclear Information System (INIS)

Brett, J.F.; Warren, T.M.

1991-01-01

This patent describes a method for making a drill bit of the type having a bearing zone on a side portion of a bit body and a cutting zone with cutters mounted on the bit body. It comprises: mounting a preselected number of cutters within the cutting zone on the bit body; generating a model of the geometry of the bit body and cutters mounted thereon; calculating the imbalance force which would occur in the bit body under defined drilling parameters; using the imbalance force and model to calculate the position of at least one additional cutter which when mounted within the cutting zone on the bit body in the calculated position would create a net imbalance force directed towards the bearing zone; and mounting an additional cutter within the cutting zone on the bit body in the position so calculated

A Trustworthiness Evaluation Method for Software Architectures Based on the Principle of Maximum Entropy (POME and the Grey Decision-Making Method (GDMM

Directory of Open Access Journals (Sweden)

Rong Jiang

2014-09-01

Full Text Available As the early design decision-making structure, a software architecture plays a key role in the final software product quality and the whole project. In the software design and development process, an effective evaluation of the trustworthiness of a software architecture can help making scientific and reasonable decisions on the architecture, which are necessary for the construction of highly trustworthy software. In consideration of lacking the trustworthiness evaluation and measurement studies for software architecture, this paper provides one trustworthy attribute model of software architecture. Based on this model, the paper proposes to use the Principle of Maximum Entropy (POME and Grey Decision-making Method (GDMM as the trustworthiness evaluation method of a software architecture and proves the scientificity and rationality of this method, as well as verifies the feasibility through case analysis.

Use of a fuzzy decision-making method in evaluating severe accident management strategies

International Nuclear Information System (INIS)

Jae, M.; Moon, J.H.

2002-01-01

In developing severe accident management strategies, an engineering decision would be made based on the available data and information that are vague, imprecise and uncertain by nature. These sorts of vagueness and uncertainty are due to lack of knowledge for the severe accident sequences of interest. The fuzzy set theory offers a possibility of handling these sorts of data and information. In this paper, the possibility to apply the decision-making method based on fuzzy set theory to the evaluation of the accident management strategies at a nuclear power plant is scrutinized. The fuzzy decision-making method uses linguistic variables and fuzzy numbers to represent the decision-maker's subjective assessments for the decision alternatives according to the decision criteria. The fuzzy mean operator is used to aggregate the decision-maker's subjective assessments, while the total integral value method is used to rank the decision alternatives. As a case study, the proposed method is applied to evaluating the accident management strategies at a nuclear power plant

Development of a Pancake-Making Method for a Batter-Based Product

Science.gov (United States)

Cake and pancake are major batter-based products made with soft wheat flour. A standardized baking method for high-ratio cake has been widely used for evaluating the cake-baking performance of soft wheat flour. Chlorinated flour is used to make high-ratio cake, and the cake formula contains relative...

A Hybrid Approach Using ISM For Leveling Agile Criteria And Fuzzy AHP To Determine The Relative Weights Of Evaluation Criteria And Fuzzy TOPSIS To Rank The Alternatives

Directory of Open Access Journals (Sweden)

Mahdi Karbasian1

2012-02-01

Full Text Available In today’s organizations, performance measurement comes more to the foreground with the advancement in the high technology. Supplier selection is an important issue in supply chain management. In recent years, determining the best supplier in the supply chain has become a key strategic consideration. However, these decisions usually involve several objectives or criteria, and it is often necessary to compromise among possibly conflicting factors. Thus, the multiple criteria decision making (MCDM becomes a useful approach to solve this kind of problem. In order to use the conceptual framework for measuring performance supplier, a methodology that takes into account both quantitative and qualitative factors and the interrelations between them should be utilized. for leveling an integrated approach of analytic hierarchy process AHP and fuzzy TOPSIS method is proposed to obtain final ranking. The interactions among the criteria are also analyzed before arriving at a decision for the selection of supplier from among six alternatives. Linguistic values are used to assess the ratings and weights for criterion. These linguistic ratings can be expressed in triangular fuzzy numbers. Then, a hierarchy multiple criteria decision-making (MCDM model based on fuzzy-sets theory including FAHP and FTOPSIS are applied. There are two approaches for aggregating values including relative importance of evaluation criteria with respect to the overall objective and rating of alternatives with respect to each criterion in fuzzy group TOPSIS: First aggregation and Last aggregation. In first aggregation approach weight of each criterion and rating of alternatives with respect to each criterion gained from decision makers are aggregated at first and TOPSIS method then apply to these aggregate values. In last aggregation approach weight of each criterion and rating of alternatives with respect to each criterion gained from decision makers are used in TOPSIS method

Consumer preferences for selection of solar home system in urban areas, pakistan

International Nuclear Information System (INIS)

Gohar, K.

2014-01-01

Consumer preferences can lay foundation for determining key product attributes essential for the success of a product in the market, enabling the manufacturers optimally allocate resources towards imparting these critical attributes. However identification of consumer preferences especially for new products is a challenging task. This research investigated the consumer preference factors for solar home systems in Rawalpindi/Islamabad (Pakistan); applying MCDM (Multi Criteria Decision Making) approach, AHP (Analytical Hierarchy Process) survey and analysis method is used for prioritization of the factors and comparison of decision alternatives. Fourteen factors grouped into five categories are selected. It has been found that the manufacturers have to emphasize on performance and functional attributes of these systems at this stage, the cost factors are comparatively lower in importance. Make and warranty, Environmental and Physical features are also lesser important to the early adopters. (author)

A model for strategic selection of feeder management systems: A case study

Energy Technology Data Exchange (ETDEWEB)

Chen, Hsing Hung [Faculty of Management and Administration, Macau University of Science and Technology, Avenue Wei Long, Taipa, Macau (China); Lee, Amy H.I. [Department of Industrial Management, Chung Hua University, No. 707, Sec. 2, Wu Fu Rd., Hsinchu 300 (China); Kang, He-Yau [Department of Industrial Engineering and Management, National Chin-Yi University of Technology, 35, Lane 215, Sec. 1, Chung San Rd., Taiping, Taichung 411 (China)

2010-06-15

The move to integrating distribution management system (DMS) and feeder management system (FMS) in China is becoming the main trend in recent years, in addition to upgrading and rebuilding existing energy management system (EMS) and DMS. However, with increasing complexity in the social environments along with rapidly changing technologies, how to select a suitable contractor and a FMS project is becoming an important issue for electric power companies. This paper first briefly introduces FMS and then lists its critical success criteria. A model that applies a multi-criteria decision-making (MCDM) method, an analytic network process (ANP) associated with benefits, opportunities, costs and risks (BOCR), is constructed to help power companies to select the most suitable FMS project. (author)

Strip type radiation detector and method of making same

International Nuclear Information System (INIS)

Jantsch, O.; Feigt, I.; Willig, W.R.

1976-01-01

An improved strip detector and a method for making such a detector in which a high resistivity N conduction semiconductor body has electrode strips formed thereon by diffusion is described. The strips are formed so as to be covered by an oxide layer at the surface point of the PN junction and in which the opposite side of the semiconductor body then has a substantial amount of material etched away to form a thin semiconductor upon which strip electrodes which are perpendicular to the electrodes on the first side are then placed

Electrochemical Method of Making Porous Particles Using a Constant Current Density

Science.gov (United States)

Ferrari, Mauro (Inventor); Liu, Xuewu (Inventor); Cheng, Ming-Cheng (Inventor)

2014-01-01

Provided is a particle that includes a first porous region and a second porous region that differs from the first porous region. Also provided is a particle that has a wet etched porous region and that does have a nucleation layer associated with wet etching. Methods of making porous particles are also provided.

An evidence-based patient-centered method makes the biopsychosocial model scientific.

Science.gov (United States)

Smith, Robert C; Fortin, Auguste H; Dwamena, Francesca; Frankel, Richard M

2013-06-01

To review the scientific status of the biopsychosocial (BPS) model and to propose a way to improve it. Engel's BPS model added patients' psychological and social health concerns to the highly successful biomedical model. He proposed that the BPS model could make medicine more scientific, but its use in education, clinical care, and, especially, research remains minimal. Many aver correctly that the present model cannot be defined in a consistent way for the individual patient, making it untestable and non-scientific. This stems from not obtaining relevant BPS data systematically, where one interviewer obtains the same information another would. Recent research by two of the authors has produced similar patient-centered interviewing methods that are repeatable and elicit just the relevant patient information needed to define the model at each visit. We propose that the field adopt these evidence-based methods as the standard for identifying the BPS model. Identifying a scientific BPS model in each patient with an agreed-upon, evidence-based patient-centered interviewing method can produce a quantum leap ahead in both research and teaching. A scientific BPS model can give us more confidence in being humanistic. In research, we can conduct more rigorous studies to inform better practices. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

International Nuclear Information System (INIS)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P.

2010-01-01

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

Energy Technology Data Exchange (ETDEWEB)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P. [Ecole Polytechnique, Montreal, PQ (Canada). Dept. de Genie Chimique. Design Engineering Chair in Process Integration

2010-05-15

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Fuzzy Simple Additive Weighting Method in the Decision Making of Human Resource Recruitment

Directory of Open Access Journals (Sweden)

Budi Prasetiyo

2016-12-01

Full Text Available The Company is one of the jobs that was founded to reduce unemployment. The progress of a company is determined by the human resources that exist within the company. So, the selection of workers will join the company need to be selected first. The hardest thing in making a selection factor is the effort to eliminate the subjectivity of the personnel manager so that every choice made is objective based on the criteria expected by the company. To help determine who is accepted as an employee in the company, we need a method that can provide a valid decision. Therefore, we use Fuzzy Multiple Attribute Decision Making with Simple Additive Weighting method (SAW to decide to make in human resource recruitment. This method was chosen because it can provide the best alternative from several alternatives. In this case, the alternative is that the applicants or candidates. This research was conducted by finding the weight values for each attribute. Then do the ranking process that determines the optimal alternative to the best applicants who qualify as employees of the company. Based on calculations by the SAW obtained the two highest ranking results are A5 (alternative 5 and A1 (alternative 1, to obtain two candidates received.

An Extended TOPSIS Method for Multiple Attribute Decision Making based on Interval Neutrosophic Uncertain Linguistic Variables

Directory of Open Access Journals (Sweden)

Said Broumi

2015-03-01

Full Text Available The interval neutrosophic uncertain linguistic variables can easily express the indeterminate and inconsistent information in real world, and TOPSIS is a very effective decision making method more and more extensive applications. In this paper, we will extend the TOPSIS method to deal with the interval neutrosophic uncertain linguistic information, and propose an extended TOPSIS method to solve the multiple attribute decision making problems in which the attribute value takes the form of the interval neutrosophic uncertain linguistic variables and attribute weight is unknown. Firstly, the operational rules and properties for the interval neutrosophic variables are introduced. Then the distance between two interval neutrosophic uncertain linguistic variables is proposed and the attribute weight is calculated by the maximizing deviation method, and the closeness coefficients to the ideal solution for each alternatives. Finally, an illustrative example is given to illustrate the decision making steps and the effectiveness of the proposed method.

An Intelligent Fleet Condition-Based Maintenance Decision Making Method Based on Multi-Agent

OpenAIRE

Bo Sun; Qiang Feng; Songjie Li

2012-01-01

According to the demand for condition-based maintenance online decision making among a mission oriented fleet, an intelligent maintenance decision making method based on Multi-agent and heuristic rules is proposed. The process of condition-based maintenance within an aircraft fleet (each containing one or more Line Replaceable Modules) based on multiple maintenance thresholds is analyzed. Then the process is abstracted into a Multi-Agent Model, a 2-layer model structure containing host negoti...

Hydrogen storage materials and method of making by dry homogenation

Science.gov (United States)

Jensen, Craig M.; Zidan, Ragaiy A.

2002-01-01

Dry homogenized metal hydrides, in particular aluminum hydride compounds, as a material for reversible hydrogen storage is provided. The reversible hydrogen storage material comprises a dry homogenized material having transition metal catalytic sites on a metal aluminum hydride compound, or mixtures of metal aluminum hydride compounds. A method of making such reversible hydrogen storage materials by dry doping is also provided and comprises the steps of dry homogenizing metal hydrides by mechanical mixing, such as be crushing or ball milling a powder, of a metal aluminum hydride with a transition metal catalyst. In another aspect of the invention, a method of powering a vehicle apparatus with the reversible hydrogen storage material is provided.

Half-heusler alloys with enhanced figure of merit and methods of making

Science.gov (United States)

Ren, Zhifeng; Yan, Xiao; Joshi, Giri; Chen, Shuo; Chen, Gang; Poudel, Bed; Caylor, James Christopher

2015-06-02

Thermoelectric materials and methods of making thermoelectric materials having a nanometer mean grain size less than 1 micron. The method includes combining and arc melting constituent elements of the thermoelectric material to form a liquid alloy of the thermoelectric material and casting the liquid alloy of the thermoelectric material to form a solid casting of the thermoelectric material. The method also includes ball milling the solid casting of the thermoelectric material into nanometer mean size particles and sintering the nanometer size particles to form the thermoelectric material having nanometer scale mean grain size.

Fuzzy methods in decision making process - A particular approach in manufacturing systems

Science.gov (United States)

Coroiu, A. M.

2015-11-01

We are living in a competitive environment, so we can see and understand that the most of manufacturing firms do the best in order to accomplish meeting demand, increasing quality, decreasing costs, and delivery rate. In present a stake point of interest is represented by the development of fuzzy technology. A particular approach for this is represented through the development of methodologies to enhance the ability to managed complicated optimization and decision making aspects involving non-probabilistic uncertainty with the reason to understand, development, and practice the fuzzy technologies to be used in fields such as economic, engineering, management, and societal problems. Fuzzy analysis represents a method for solving problems which are related to uncertainty and vagueness; it is used in multiple areas, such as engineering and has applications in decision making problems, planning and production. As a definition for decision making process we can use the next one: result of mental processes based upon cognitive process with a main role in the selection of a course of action among several alternatives. Every process of decision making can be represented as a result of a final choice and the output can be represented as an action or as an opinion of choice. Different types of uncertainty can be discovered in a wide variety of optimization and decision making problems related to planning and operation of power systems and subsystems. The mixture of the uncertainty factor in the construction of different models serves for increasing their adequacy and, as a result, the reliability and factual efficiency of decisions based on their analysis. Another definition of decision making process which came to illustrate and sustain the necessity of using fuzzy method: the decision making is an approach of choosing a strategy among many different projects in order to achieve some purposes and is formulated as three different models: high risk decision, usual risk

Dual worth trade-off method and its application for solving multiple criteria decision making problems

Institute of Scientific and Technical Information of China (English)

Feng Junwen

2006-01-01

To overcome the limitations of the traditional surrogate worth trade-off (SWT) method and solve the multiple criteria decision making problem more efficiently and interactively, a new method labeled dual worth trade-off (DWT) method is proposed. The DWT method dynamically uses the duality theory related to the multiple criteria decision making problem and analytic hierarchy process technique to obtain the decision maker's solution preference information and finally find the satisfactory compromise solution of the decision maker. Through the interactive process between the analyst and the decision maker, trade-off information is solicited and treated properly, the representative subset of efficient solutions and the satisfactory solution to the problem are found. The implementation procedure for the DWT method is presented. The effectiveness and applicability of the DWT method are shown by a practical case study in the field of production scheduling.

A Comparative Study on Sugeno Integral Approach to Aggregation of Experts' Opinion

International Nuclear Information System (INIS)

Kim, Seong Ho; Kim, Kil Yoo; Kim, Tae Woon

2007-01-01

A multicriteria decision-making (MCDM) problem of preference ranking of various alternatives is common in science and engineering fields. Usually, the MCDM problem is characterized in terms of two factors: relative importance of each evaluation criterion and appropriateness of each alternative. The ranking is determined by a relative degree of appropriateness of decision alternatives. In reality, there are different grades of interaction among decision criteria. One of well-known approaches to aggregation of those two factors is the weighted arithmetic mean (WAM) approach. Here, importance weights for criteria are viewed as probability measures. The weights are linearly aggregated with appropriateness values. In the present work, the main objective is to study an aggregation model with various grades of interactions among the decision elements. The successful applications of fuzzy integral aggregation operators to subjective MCDM problems have been motivating this work. On the basis of λ-fuzzy measures and Sugeno integral (SI), the SI aggregation approach is proposed. Here, interaction among criteria is dealt with λ-fuzzy measures. Aggregation of these measures and appropriateness values is implemented, especially, by the Sugeno integral as one of fuzzy integrals. Aggregated values obtained by the SI approach are viewed as decision maker's pessimistic (or conservative) attitude towards information aggregation, compared to the WAM approach. Firstly, the concepts of the λ-fuzzy measure and the Sugeno fuzzy integral are introduced. Then, as an application of the SI approach, an illustrative example is given

Wind blade spar cap and method of making

Science.gov (United States)

Mohamed, Mansour H [Raleigh, NC

2008-05-27

A wind blade spar cap for strengthening a wind blade including an integral, unitary three-dimensional woven material having a first end and a second end, corresponding to a root end of the blade and a tip end of the blade, wherein the material tapers in width from the first to the second end while maintaining a constant thickness and decreasing weight therebetween, the cap being capable of being affixed to the blade for providing increased strength with controlled variation in weight from the root end to the tip end based upon the tapered width of the material thereof. The present inventions also include the method of making the wind blade spar cap and a wind blade including the wind blade spar cap.

Superconducting wires and methods of making thereof

Energy Technology Data Exchange (ETDEWEB)

Xu, Xingchen; Sumption, Michael D.; Peng, Xuan

2018-03-13

Disclosed herein are superconducting wires. The superconducting wires can comprise a metallic matrix and at least one continuous subelement embedded in the matrix. Each subelement can comprise a non-superconducting core, a superconducting layer coaxially disposed around the non-superconducting core, and a barrier layer coaxially disposed around the superconducting layer. The superconducting layer can comprise a plurality of Nb.sub.3Sn grains stabilized by metal oxide particulates disposed therein. The Nb.sub.3Sn grains can have an average grain size of from 5 nm to 90 nm (for example, from 15 nm to 30 nm). The superconducting wire can have a high-field critical current density (J.sub.c) of at least 5,000 A/mm.sup.2 at a temperature of 4.2 K in a magnetic field of 12 T. Also described are superconducting wire precursors that can be heat treated to prepare superconducting wires, as well as methods of making superconducting wires.

THERMOPLASTIC MATRIX SELECTION FOR FIBRE METAL LAMINATE USING FUZZY VIKOR AND ENTROPY MEASURE FOR OBJECTIVE WEIGHTING

Directory of Open Access Journals (Sweden)

N. M. ISHAK

2017-10-01

Full Text Available The purpose of this study is to define the suitable thermoplastic matrix for fibre metal laminate for automotive front hood utilisation. To achieve the accurate and reliable results, the decision making process involved subjective and objective weighting where the combination of Fuzzy VIKOR and entropy method have been applied. Fuzzy VIKOR is used for ranking purpose and entropy method is used to determine the objective weighting. The result shows that polypropylene is the best thermoplastic matrix for fibre metal laminate by satisfying two compromise solutions with validation using least VIKOR index value scored 0.00, compared to low density polyethylene, high density polyethylene and polystyrene. Through a combination of Fuzzy VIKOR and entropy, it is proved that this method gives a higher degree of confidence to the decision maker especially for fibre metal laminate thermoplastic matrix selection due to its systematic and scientific selection method involving MCDM.

Using the method of judgement analysis to address variations in diagnostic decision making

OpenAIRE

Hancock, Helen C; Mason, James M; Murphy, Jerry J

2012-01-01

Abstract Background Heart failure is not a clear-cut diagnosis but a complex clinical syndrome with consequent diagnostic uncertainty. Judgment analysis is a method to help clinical teams to understand how they make complex decisions. The method of judgment analysis was used to determine the factors that influence clinicians' diagnostic decisions about heart failure. Methods Three consultants, three middle grade doctors, and two junior doctors each evaluated 45 patient scenarios. The main out...

Nanostructured Metal Oxides And Mixed Metal Oxides, Methods Of Making These Nanoparticles, And Methods Of Their Use

KAUST Repository

Polshettiwar, Vivek

2013-04-11

Embodiments of the present disclosure provide for nanoparticles, methods of making nanoparticles, methods of using the nanoparticles, and the like. Nanoparticles of the present disclosure can have a variety of morphologies, which may lead to their use in a variety of technologies and processes. Nanoparticles of the present may be used in sensors, optics, mechanics, circuits, and the like. In addition, nanoparticles of the present disclosure may be used in catalytic reactions, for CO oxidation, as super-capacitors, in hydrogen storage, and the like.

Nanostructured Metal Oxides And Mixed Metal Oxides, Methods Of Making These Nanoparticles, And Methods Of Their Use

KAUST Repository

Polshettiwar, Vivek; Fihri, Aziz

2013-01-01

Embodiments of the present disclosure provide for nanoparticles, methods of making nanoparticles, methods of using the nanoparticles, and the like. Nanoparticles of the present disclosure can have a variety of morphologies, which may lead to their use in a variety of technologies and processes. Nanoparticles of the present may be used in sensors, optics, mechanics, circuits, and the like. In addition, nanoparticles of the present disclosure may be used in catalytic reactions, for CO oxidation, as super-capacitors, in hydrogen storage, and the like.

Multiple Criteria Decision Making by Generalized Data Envelopment Analysis Introducing Aspiration Level Method

International Nuclear Information System (INIS)

Yun, Yeboon; Arakawa, Masao; Hiroshi, Ishikawa; Nakayama, Hirotaka

2002-01-01

It has been proved in problems with 2-objective functions that genetic algorithms (GAs) are well utilized for generating Pareto optimal solutions, and then decision making can be easily performed on the basis of visualized Pareto optimal solutions. However, GAs are difficult to visualize Pareto optimal solutions in cases in which the number of objective function is more than 4. Hence, it is trouble some to grasp the trade-off among many objective functions, and decision makers hesitate to choose a final solution from a number of Pareto optimal solutions. In order to solve these problems, we suggest an aspiration level approach to the method using the generalized data envelopment analysis and GAs. We show that the proposed method supports decision makers to choose their desirable solution from many Pareto optimal solutions. Furthermore, it will be seen that engineering design can be effectively done by the proposed method, which makes generation of several Pareto optimal solutions close to the aspiration level and trade-off analysis easily

Hollow fiber structures, methods of use thereof, methods of making, and pressure-retarded processes

KAUST Repository

Le, Lieu Ngoc; Bettahalli, Narasimha Murthy Srivatsa; Nunes, Suzana Pereira; Chung, Neal Tai-Shung

2016-01-01

Embodiments of the present disclosure provide for composite materials, methods of making composite materials, methods of using composite materials, and the like. In particular, the present application relates to hollow fibers and to pressure-retarded osmosis systems comprising said fibers. The hollow fibers have an inside layer and an outside layer, wherein the outside layer covers an outside surface of the inside layer, wherein the inside layer forms a boundary around the lumen, wherein the inside layer includes a bi-layer structure, wherein the bi-layer structure includes a sponge-like layer and a finger-like layer, wherein the sponge-like layer is disposed closer to the lumen of the hollow fiber and the finger-like layer is disposed on the sponge-like layer on the side opposite the lumen, wherein the outside layer includes a polyamide layer.

Hollow fiber structures, methods of use thereof, methods of making, and pressure-retarded processes

KAUST Repository

Le, Lieu Ngoc

2016-12-08

Embodiments of the present disclosure provide for composite materials, methods of making composite materials, methods of using composite materials, and the like. In particular, the present application relates to hollow fibers and to pressure-retarded osmosis systems comprising said fibers. The hollow fibers have an inside layer and an outside layer, wherein the outside layer covers an outside surface of the inside layer, wherein the inside layer forms a boundary around the lumen, wherein the inside layer includes a bi-layer structure, wherein the bi-layer structure includes a sponge-like layer and a finger-like layer, wherein the sponge-like layer is disposed closer to the lumen of the hollow fiber and the finger-like layer is disposed on the sponge-like layer on the side opposite the lumen, wherein the outside layer includes a polyamide layer.

Radio-methyl vorozole and methods for making and using the same

Science.gov (United States)

Kim, Sung Won; Biegon, Anat; Fowler, Joanna S.

2014-08-12

Radiotracer vorozole compounds for in vivo and in vitro assaying, studying and imaging cytochrome P450 aromatase enzymes in humans, animals, and tissues and methods for making and using the same are provided. [N-radio-methyl] vorozole substantially separated from an N-3 radio-methyl isomer of vorozole is provided. Separation is accomplished through use of chromatography resins providing multiple mechanisms of selectivity.

Multilayer sulfur-resistant composite metal membranes and methods of making and repairing the same

Science.gov (United States)

Way, J. Douglas; Hatlevik, Oyvind

2014-07-15

The invention relates to thin, hydrogen-permeable, sulfur-resistant membranes formed from multi-layers of palladium or palladium-alloy coatings on porous, ceramic or metal supports, methods of making these membranes, methods of repairing layers of these membranes and devices that incorporate these membranes.

Method of Making Reaction Induced Phase Separation Membranes and Uses Thereof

KAUST Repository

Peinemann, Klaus-Viktor

2017-08-10

Provided herein are methods of making asymmetric membranes comprising a first layer and a second layer. The methods include preparing a polymeric solution comprising one or more polymers, casting the polymeric solution to form a polymeric film, contacting the polymeric film with a solvent comprising a crosslinker under conditions to form a first layer on the top of the film, wherein the first layer is dense and solvent resistant, and contacting the polymeric film having the dense, solvent-resistant first layer with a non-solvent solution under conditions that form a porous second layer on the bottom of the film.

The use of multi-criteria decision making models in evaluating anesthesia method options in circumcision surgery.

Science.gov (United States)

Hancerliogullari, Gulsah; Hancerliogullari, Kadir Oymen; Koksalmis, Emrah

2017-01-23

Determining the most suitable anesthesia method for circumcision surgery plays a fundamental role in pediatric surgery. This study is aimed to present pediatric surgeons' perspective on the relative importance of the criteria for selecting anesthesia method for circumcision surgery by utilizing the multi-criteria decision making methods. Fuzzy set theory offers a useful tool for transforming linguistic terms into numerical assessments. Since the evaluation of anesthesia methods requires linguistic terms, we utilize the fuzzy Analytic Hierarchy Process (AHP) and fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). Both mathematical decision-making methods are originated from individual judgements for qualitative factors utilizing the pair-wise comparison matrix. Our model uses four main criteria, eight sub-criteria as well as three alternatives. To assess the relative priorities, an online questionnaire was completed by three experts, pediatric surgeons, who had experience with circumcision surgery. Discussion of the results with the experts indicates that time-related factors are the most important criteria, followed by psychology, convenience and duration. Moreover, general anesthesia with penile block for circumcision surgery is the preferred choice of anesthesia compared to general anesthesia without penile block, which has a greater priority compared to local anesthesia under the discussed main-criteria and sub-criteria. The results presented in this study highlight the need to integrate surgeons' criteria into the decision making process for selecting anesthesia methods. This is the first study in which multi-criteria decision making tools, specifically fuzzy AHP and fuzzy TOPSIS, are used to evaluate anesthesia methods for a pediatric surgical procedure.

Licensing method for new nuclear power plant: A study on decision making modeling

Energy Technology Data Exchange (ETDEWEB)

Ramli, N; Ohaga, E. O.; Jung, J. C. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2012-10-15

This work provides a study on decision making modeling for a licensing method of a new nuclear power plant. SWOT analysis provides the licensing alternatives attributes, then the expectation from either COL or two step licensing method is decided by inputting the output from the Hurwitz mathematical model. From the analysis, COL shows the best candidate for both optimistic and pessimistic conditions.

Licensing method for new nuclear power plant: A study on decision making modeling

International Nuclear Information System (INIS)

Ramli, N; Ohaga, E. O.; Jung, J. C.

2012-01-01

This work provides a study on decision making modeling for a licensing method of a new nuclear power plant. SWOT analysis provides the licensing alternatives attributes, then the expectation from either COL or two step licensing method is decided by inputting the output from the Hurwitz mathematical model. From the analysis, COL shows the best candidate for both optimistic and pessimistic conditions

A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection

Science.gov (United States)

Dang, Yaoguo; Mao, Wenxin

2018-01-01

In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method. PMID:29510521

A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection.

Science.gov (United States)

Sun, Huifang; Dang, Yaoguo; Mao, Wenxin

2018-03-03

In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method.

Tourism entrepreneurship policy: a hybrid MCDM model combining DEMATEL and ANP (DANP

Directory of Open Access Journals (Sweden)

Saeed Jafari-Moghadam

2017-06-01

Full Text Available Small and Medium Enterprises (SME’s, and Entrepreneurial businesses (EB play an important role in tourism since tourism has increasingly become the largest economic sector. Entrepreneurships known as a mean of economic development and policymakers are looking for creating a competitive and dynamic entrepreneurial economy. The aim of this study is to present a model for entrepreneurship tourism policy by using entrepreneurship development framework, which interacts with economic development. To this purpose, entrepreneurship policy dimensions are weighted and prioritized by tourism entrepreneurs, tourism policymakers and experts using decision-making trial and evaluation laboratory (DEMATEL technique and Analytical Network Process (ANP technique. First, DEMATEL technique is used to identify complex relationships, and to form a network relationship map. Then, ANP technique is used to calculate the influential weights of policy criteria. Results show that policymakers for entrepreneurship development in tourism need to consider basic requirements factors. In addition, they should improve efficiency enhancer criteria as well as innovation driver criteria. Also, the relationship among dimensions and their influences on each other are illustrated. Using the capabilities of this method, we can determine the casual relationships between dimensions and criteria and identify priorities for policy.

MCDM In Practice

DEFF Research Database (Denmark)

Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Brohus, Henrik

2008-01-01

may mention the Passive House concept. With this enlarged focus on low-energy buildings it has become even more important to integrate the large number of parameters and to be aware of the correlation between these. When trying to optimize buildings at several levels at the same time; concerning...

Adjusted permutation method for multiple attribute decision making with meta-heuristic solution approaches

Directory of Open Access Journals (Sweden)

Hossein Karimi

2011-04-01

Full Text Available The permutation method of multiple attribute decision making has two significant deficiencies: high computational time and wrong priority output in some problem instances. In this paper, a novel permutation method called adjusted permutation method (APM is proposed to compensate deficiencies of conventional permutation method. We propose Tabu search (TS and particle swarm optimization (PSO to find suitable solutions at a reasonable computational time for large problem instances. The proposed method is examined using some numerical examples to evaluate the performance of the proposed method. The preliminary results show that both approaches provide competent solutions in relatively reasonable amounts of time while TS performs better to solve APM.

The effect of uncertainties in distance-based ranking methods for multi-criteria decision making

Science.gov (United States)

Jaini, Nor I.; Utyuzhnikov, Sergei V.

2017-08-01

Data in the multi-criteria decision making are often imprecise and changeable. Therefore, it is important to carry out sensitivity analysis test for the multi-criteria decision making problem. The paper aims to present a sensitivity analysis for some ranking techniques based on the distance measures in multi-criteria decision making. Two types of uncertainties are considered for the sensitivity analysis test. The first uncertainty is related to the input data, while the second uncertainty is towards the Decision Maker preferences (weights). The ranking techniques considered in this study are TOPSIS, the relative distance and trade-off ranking methods. TOPSIS and the relative distance method measure a distance from an alternative to the ideal and antiideal solutions. In turn, the trade-off ranking calculates a distance of an alternative to the extreme solutions and other alternatives. Several test cases are considered to study the performance of each ranking technique in both types of uncertainties.

Sequential Probability Ratio Testing with Power Projective Base Method Improves Decision-Making for BCI

Science.gov (United States)

Liu, Rong

2017-01-01

Obtaining a fast and reliable decision is an important issue in brain-computer interfaces (BCI), particularly in practical real-time applications such as wheelchair or neuroprosthetic control. In this study, the EEG signals were firstly analyzed with a power projective base method. Then we were applied a decision-making model, the sequential probability ratio testing (SPRT), for single-trial classification of motor imagery movement events. The unique strength of this proposed classification method lies in its accumulative process, which increases the discriminative power as more and more evidence is observed over time. The properties of the method were illustrated on thirteen subjects' recordings from three datasets. Results showed that our proposed power projective method outperformed two benchmark methods for every subject. Moreover, with sequential classifier, the accuracies across subjects were significantly higher than that with nonsequential ones. The average maximum accuracy of the SPRT method was 84.1%, as compared with 82.3% accuracy for the sequential Bayesian (SB) method. The proposed SPRT method provides an explicit relationship between stopping time, thresholds, and error, which is important for balancing the time-accuracy trade-off. These results suggest SPRT would be useful in speeding up decision-making while trading off errors in BCI. PMID:29348781

Evaluation of green manufacturing practices using a hybrid MCDM model combining DANP with PROMETHEE

DEFF Research Database (Denmark)

Govindan, Kannan; Kannan, Devika; Shankar, Madan

2015-01-01

The advent of increasing industrialisation and globalisation has put pressure on Indian enterprises to increase the integration of environmentally conscious manufacturing practices into their operations. Numerous studies have explored this strategy but there are significant gaps in the existing......-criteria decision-making model combining DEMATEL based on ANP (DANP) with Preference Ranking Organisation METHod for Enrichment Evaluations. A methodological framework is proposed to evaluate GMP and the same is validated within a particular single case industry situated in the southern part of India, who...... is the leading manufacturer of rubber tyres and tubes. By virtue of these findings, industries can identify the best GM practice to adopt in order to increase the chances of profit and performance throughout their systems. This study concludes by successfully identifying the best GM practice for this case...

A mixed methods thematic review: Health-related decision-making by the older person.

Science.gov (United States)

King, Lindy; Harrington, Ann; Linedale, Ecushla; Tanner, Elizabeth

2018-04-01

To undertake a mixed methods thematic literature review that explored how elderly adults approached decision-making in regard to their health care following discharge. A critical time for appropriate health decisions occurs during hospital discharge planning with nursing staff. However, little is known how the 89% of elderly living at home make decisions regarding their health care. Research into older adults' management of chronic conditions emerges as an important step to potentially encourage symptom monitoring, prevent missed care and detect deterioration. All should reduce the risk of hospital re-admission. A mixed methods thematic literature review was undertaken. The structure followed the PRISMA reporting guidelines for systematic reviews recommended by the EQUATOR network. PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL) and Scopus online databases were searched using keywords, inclusion and exclusion criteria. References drawn from relevant publications, identified by experts and published between 1995 and 2017 were also considered. Twenty-five qualitative, quantitative and mixed methods studies and reviews were critically appraised (CASP 2013) before inclusion in the review. Analysis of each study's findings was undertaken using Braun and Clarke's (2006) steps to identify major themes and sub-themes. Four main themes associated with health-related decision-making in the elderly were identified: "the importance of maintaining independence," "decision making style," "management of conditions at home" and "discharge planning." Health care decision preferences in the elderly emerged as highly complex and influenced by multiple factors. Development of a tool to assess these components has been recommended. Nurses play a vital role in exploring and understanding the influence that maintaining independence has with each patient. This understanding provides an initial step toward development of a tool to assist collaboration between

MULTIPLE CRITERA METHODS WITH FOCUS ON ANALYTIC HIERARCHY PROCESS AND GROUP DECISION MAKING

Directory of Open Access Journals (Sweden)

Lidija Zadnik-Stirn

2010-12-01

Full Text Available Managing natural resources is a group multiple criteria decision making problem. In this paper the analytic hierarchy process is the chosen method for handling the natural resource problems. The one decision maker problem is discussed and, three methods: the eigenvector method, data envelopment analysis method, and logarithmic least squares method are presented for the derivation of the priority vector. Further, the group analytic hierarchy process is discussed and six methods for the aggregation of individual judgments or priorities: weighted arithmetic mean method, weighted geometric mean method, and four methods based on data envelopment analysis are compared. The case study on land use in Slovenia is applied. The conclusions review consistency, sensitivity analyses, and some future directions of research.

Sustainable Urban Forestry Potential Based Quantitative And Qualitative Measurement Using Geospatial Technique

International Nuclear Information System (INIS)

Rosli, A Z; Reba, M N M; Roslan, N; Room, M H M

2014-01-01

In order to maintain the stability of natural ecosystems around urban areas, urban forestry will be the best initiative to maintain and control green space in our country. Integration between remote sensing (RS) and geospatial information system (GIS) serves as an effective tool for monitoring environmental changes and planning, managing and developing a sustainable urbanization. This paper aims to assess capability of the integration of RS and GIS to provide information for urban forest potential sites based on qualitative and quantitative by using priority parameter ranking in the new township of Nusajaya. SPOT image was used to provide high spatial accuracy while map of topography, landuse, soils group, hydrology, Digital Elevation Model (DEM) and soil series data were applied to enhance the satellite image in detecting and locating present attributes and features on the ground. Multi-Criteria Decision Making (MCDM) technique provides structural and pair wise quantification and comparison elements and criteria for priority ranking for urban forestry purpose. Slope, soil texture, drainage, spatial area, availability of natural resource, and vicinity of urban area are criteria considered in this study. This study highlighted the priority ranking MCDM is cost effective tool for decision-making in urban forestry planning and landscaping

Sustainable Urban Forestry Potential Based Quantitative And Qualitative Measurement Using Geospatial Technique

Science.gov (United States)

Rosli, A. Z.; Reba, M. N. M.; Roslan, N.; Room, M. H. M.

2014-02-01

In order to maintain the stability of natural ecosystems around urban areas, urban forestry will be the best initiative to maintain and control green space in our country. Integration between remote sensing (RS) and geospatial information system (GIS) serves as an effective tool for monitoring environmental changes and planning, managing and developing a sustainable urbanization. This paper aims to assess capability of the integration of RS and GIS to provide information for urban forest potential sites based on qualitative and quantitative by using priority parameter ranking in the new township of Nusajaya. SPOT image was used to provide high spatial accuracy while map of topography, landuse, soils group, hydrology, Digital Elevation Model (DEM) and soil series data were applied to enhance the satellite image in detecting and locating present attributes and features on the ground. Multi-Criteria Decision Making (MCDM) technique provides structural and pair wise quantification and comparison elements and criteria for priority ranking for urban forestry purpose. Slope, soil texture, drainage, spatial area, availability of natural resource, and vicinity of urban area are criteria considered in this study. This study highlighted the priority ranking MCDM is cost effective tool for decision-making in urban forestry planning and landscaping.

A Comparative Approach for Ranking Contaminated Sites Based on the Risk Assessment Paradigm Using Fuzzy PROMETHEE

Science.gov (United States)

Zhang, Kejiang; Kluck, Cheryl; Achari, Gopal

2009-11-01

A ranking system for contaminated sites based on comparative risk methodology using fuzzy Preference Ranking Organization METHod for Enrichment Evaluation (PROMETHEE) was developed in this article. It combines the concepts of fuzzy sets to represent uncertain site information with the PROMETHEE, a subgroup of Multi-Criteria Decision Making (MCDM) methods. Criteria are identified based on a combination of the attributes (toxicity, exposure, and receptors) associated with the potential human health and ecological risks posed by contaminated sites, chemical properties, site geology and hydrogeology and contaminant transport phenomena. Original site data are directly used avoiding the subjective assignment of scores to site attributes. When the input data are numeric and crisp the PROMETHEE method can be used. The Fuzzy PROMETHEE method is preferred when substantial uncertainties and subjectivities exist in site information. The PROMETHEE and fuzzy PROMETHEE methods are both used in this research to compare the sites. The case study shows that this methodology provides reasonable results.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example

Energy Technology Data Exchange (ETDEWEB)

Ni Yongnian, E-mail: ynni@ncu.edu.cn [Stake Laboratory of Food Science and Technology, Nanchang University, Nanchang, Jiangxi 330047 (China); Department of Chemistry, Nanchang University, Nanchang, Jiangxi 330047 (China); Lai Yanhua [Department of Chemistry, Nanchang University, Nanchang, Jiangxi 330047 (China); Brandes, Sarina; Kokot, Serge [Applied Chemistry Cluster, School of Physical and Chemical Sciences, Queensland University of Technology, Brisbane, Queensland 4001 (Australia)

2009-08-11

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example

International Nuclear Information System (INIS)

Ni Yongnian; Lai Yanhua; Brandes, Sarina; Kokot, Serge

2009-01-01

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Multi-wavelength HPLC fingerprints from complex substances: An exploratory chemometrics study of the Cassia seed example.

Science.gov (United States)

Ni, Yongnian; Lai, Yanhua; Brandes, Sarina; Kokot, Serge

2009-08-11

Multi-wavelength fingerprints of Cassia seed, a traditional Chinese medicine (TCM), were collected by high-performance liquid chromatography (HPLC) at two wavelengths with the use of diode array detection. The two data sets of chromatograms were combined by the data fusion-based method. This data set of fingerprints was compared separately with the two data sets collected at each of the two wavelengths. It was demonstrated with the use of principal component analysis (PCA), that multi-wavelength fingerprints provided a much improved representation of the differences in the samples. Thereafter, the multi-wavelength fingerprint data set was submitted for classification to a suite of chemometrics methods viz. fuzzy clustering (FC), SIMCA and the rank ordering MCDM PROMETHEE and GAIA. Each method highlighted different properties of the data matrix according to the fingerprints from different types of Cassia seeds. In general, the PROMETHEE and GAIA MCDM methods provided the most comprehensive information for matching and discrimination of the fingerprints, and appeared to be best suited for quality assurance purposes for these and similar types of sample.

Insights from triangulation of two purchase choice elicitation methods to predict social decision making in healthcare.

Science.gov (United States)

Whitty, Jennifer A; Rundle-Thiele, Sharyn R; Scuffham, Paul A

2012-03-01

Discrete choice experiments (DCEs) and the Juster scale are accepted methods for the prediction of individual purchase probabilities. Nevertheless, these methods have seldom been applied to a social decision-making context. To gain an overview of social decisions for a decision-making population through data triangulation, these two methods were used to understand purchase probability in a social decision-making context. We report an exploratory social decision-making study of pharmaceutical subsidy in Australia. A DCE and selected Juster scale profiles were presented to current and past members of the Australian Pharmaceutical Benefits Advisory Committee and its Economic Subcommittee. Across 66 observations derived from 11 respondents for 6 different pharmaceutical profiles, there was a small overall median difference of 0.024 in the predicted probability of public subsidy (p = 0.003), with the Juster scale predicting the higher likelihood. While consistency was observed at the extremes of the probability scale, the funding probability differed over the mid-range of profiles. There was larger variability in the DCE than Juster predictions within each individual respondent, suggesting the DCE is better able to discriminate between profiles. However, large variation was observed between individuals in the Juster scale but not DCE predictions. It is important to use multiple methods to obtain a complete picture of the probability of purchase or public subsidy in a social decision-making context until further research can elaborate on our findings. This exploratory analysis supports the suggestion that the mixed logit model, which was used for the DCE analysis, may fail to adequately account for preference heterogeneity in some contexts.

Medical implants and methods of making medical implants

Science.gov (United States)

Shaw, Wendy J; Yonker, Clement R; Fulton, John L; Tarasevich, Barbara J; McClain, James B; Taylor, Doug

2014-09-16

A medical implant device having a substrate with an oxidized surface and a silane derivative coating covalently bonded to the oxidized surface. A bioactive agent is covalently bonded to the silane derivative coating. An implantable stent device including a stent core having an oxidized surface with a layer of silane derivative covalently bonded thereto. A spacer layer comprising polyethylene glycol (PEG) is covalently bonded to the layer of silane derivative and a protein is covalently bonded to the PEG. A method of making a medical implant device including providing a substrate having a surface, oxidizing the surface and reacting with derivitized silane to form a silane coating covalently bonded to the surface. A bioactive agent is then covalently bonded to the silane coating. In particular instances, an additional coating of bio-absorbable polymer and/or pharmaceutical agent is deposited over the bioactive agent.

Ortho-substituted triptycene-based diamines, monomers, and polymers, methods of making and uses thereof

KAUST Repository

Ghanem, Bader Saleh

2017-04-13

Described herein are ortho-dimethyl-substituted and tetramethyi-substituted triptycene-containing diamine monomers and microporous triptycene-based poiyimides and poiyamides, and methods of making the monomers and polymers.

Ortho-substituted triptycene-based diamines, monomers, and polymers, methods of making and uses thereof

KAUST Repository

Ghanem, Bader Saleh; Pinnau, Ingo

2017-01-01

Described herein are ortho-dimethyl-substituted and tetramethyi-substituted triptycene-containing diamine monomers and microporous triptycene-based poiyimides and poiyamides, and methods of making the monomers and polymers.

A Systems Approach to Information Technology (IT) Infrastructure Design for Utility Management Automation Systems

OpenAIRE

A. Fereidunian; H. Lesani; C. Lucas; M. Lehtonen; M. M. Nordman

2006-01-01

Almost all of electric utility companies are planning to improve their management automation system, in order to meet the changing requirements of new liberalized energy market and to benefit from the innovations in information and communication technology (ICT or IT). Architectural design of the utility management automation (UMA) systems for their IT-enabling requires proper selection of IT choices for UMA system, which leads to multi-criteria decision-makings (MCDM). In resp...

Health economics and outcomes methods in risk-based decision-making for blood safety

NARCIS (Netherlands)

Custer, Brian; Janssen, Mart P.

2015-01-01

Analytical methods appropriate for health economic assessments of transfusion safety interventions have not previously been described in ways that facilitate their use. Within the context of risk-based decision-making (RBDM), health economics can be important for optimizing decisions among competing

Superplastically foaming method to make closed pores inclusive porous ceramics

International Nuclear Information System (INIS)

Kishimoto, Akira; Hayashi, Hidetaka

2011-01-01

Porous ceramics incorporates pores to improve several properties including thermal insulation maintaining inherenet ceramic properties such as corrosion resistance and large mechanical strength. Conventional porous ceramics is usually fabricated through an insufficient sintering. Since the sintering accompanies the exclusion of pores, it must be terminated at the early stage to maintain the high porosity, leading to degraded strength and durability. Contrary to this, we have innovated superplastically foaming method to make ceramic foams only in the solid state. In this method, the previously inserted foam agent evaporates after the full densification of matrix at around the sintering temperature. Closed pores expand utilizing the superplastic deformation driven by the evolved gas pressure. The typical features of this superplastically foaming method are listed as follows, 1. The pores are introduced after sintering the solid polycrystal. 2. Only closed pores are introduced, improving the insulation of gas and sound in addition to heat. 3. The pore walls are fully densified expecting a large mechanical strength. 4. Compared with the melt foaming method, this method is practical because the fabrication temperature is far below the melting point and it does not need molds. 5. The size and the location pores can be controlled by the amount and position of the foam agent.

Failure mode and effects analysis A fuzzy group MCDM approach

Directory of Open Access Journals (Sweden)

A. Hadi-Vencheh

2013-08-01

Full Text Available In this paper, a new fuzzy group decision making (FGDM model based on alpha-level sets, is proposed to generate, more accurate fuzzy using, risk priority numbers (RPNs and ensure to be robust against the uncertainty. This model allows decision makers (DMs to evaluate FMEA risk factors using linguistic terms rather than precise numerical values, allows them to express their opinions independently. A case study is investigated using the proposed model to illustrate its applications in RPN assessment.

Colloidal Photoluminescent Amorphous Porous Silicon, Methods Of Making Colloidal Photoluminescent Amorphous Porous Silicon, And Methods Of Using Colloidal Photoluminescent Amorphous Porous Silicon

KAUST Repository

Chaieb, Sahraoui

2015-04-09

Embodiments of the present disclosure provide for a colloidal photoluminescent amorphous porous silicon particle suspension, methods of making a colloidal photoluminescent amorphous porous silicon particle suspension, methods of using a colloidal photoluminescent amorphous porous silicon particle suspension, and the like.

Colloidal Photoluminescent Amorphous Porous Silicon, Methods Of Making Colloidal Photoluminescent Amorphous Porous Silicon, And Methods Of Using Colloidal Photoluminescent Amorphous Porous Silicon

KAUST Repository

Chaieb, Saharoui; Mughal, Asad Jahangir

2015-01-01

Embodiments of the present disclosure provide for a colloidal photoluminescent amorphous porous silicon particle suspension, methods of making a colloidal photoluminescent amorphous porous silicon particle suspension, methods of using a colloidal photoluminescent amorphous porous silicon particle suspension, and the like.

Method of making a composite tube to metal joint

Energy Technology Data Exchange (ETDEWEB)

Leslie, James C.; Leslie, II, James C.; Heard, James; Truong, Liem V.; Josephson, Marvin

2017-11-07

A method for making a metal to composite tube joint including selecting an elongated interior fitting constructed with an exterior barrel, reduced in exterior diameter to form a distally facing annular shoulder and then projecting still further distally to form an interior sleeve having a radially outwardly facing bonding surface. Selecting an elongated metal outer sleeve formed proximally with a collar constructed for receipt over the barrel and increased in interior diameter and projecting distally to form an exterior sleeve having a radially inwardly facing bonding surface cooperating with the first bonding surface to form an annulus receiving an extremity of a composite tube and a bond bonding the extremity of the tube to the bonding surfaces.

Approach to Multi-Criteria Group Decision-Making Problems Based on the Best-Worst-Method and ELECTRE Method

Directory of Open Access Journals (Sweden)

Xinshang You

2016-09-01

Full Text Available This paper proposes a novel approach to cope with the multi-criteria group decision-making problems. We give the pairwise comparisons based on the best-worst-method (BWM, which can decrease comparison times. Additionally, our comparison results are determined with the positive and negative aspects. In order to deal with the decision matrices effectively, we consider the elimination and choice translation reality (ELECTRE III method under the intuitionistic multiplicative preference relations environment. The ELECTRE III method is designed for a double-automatic system. Under a certain limitation, without bothering the decision-makers to reevaluate the alternatives, this system can adjust some special elements that have the most influence on the group’s satisfaction degree. Moreover, the proposed method is suitable for both the intuitionistic multiplicative preference relation and the interval valued fuzzy preference relations through the transformation formula. An illustrative example is followed to demonstrate the rationality and availability of the novel method.

Using hierarchical Bayesian methods to examine the tools of decision-making

OpenAIRE

Michael D. Lee; Benjamin R. Newell

2011-01-01

Hierarchical Bayesian methods offer a principled and comprehensive way to relate psychological models to data. Here we use them to model the patterns of information search, stopping and deciding in a simulated binary comparison judgment task. The simulation involves 20 subjects making 100 forced choice comparisons about the relative magnitudes of two objects (which of two German cities has more inhabitants). Two worked-examples show how hierarchical models can be developed to account for and ...

Hybrid Multicriteria Group Decision Making Method for Information System Project Selection Based on Intuitionistic Fuzzy Theory

Directory of Open Access Journals (Sweden)

Jian Guo

2013-01-01

Full Text Available Information system (IS project selection is of critical importance to every organization in dynamic competing environment. The aim of this paper is to develop a hybrid multicriteria group decision making approach based on intuitionistic fuzzy theory for IS project selection. The decision makers’ assessment information can be expressed in the form of real numbers, interval-valued numbers, linguistic variables, and intuitionistic fuzzy numbers (IFNs. All these evaluation pieces of information can be transformed to the form of IFNs. Intuitionistic fuzzy weighted averaging (IFWA operator is utilized to aggregate individual opinions of decision makers into a group opinion. Intuitionistic fuzzy entropy is used to obtain the entropy weights of the criteria. TOPSIS method combined with intuitionistic fuzzy set is proposed to select appropriate IS project in group decision making environment. Finally, a numerical example for information system projects selection is given to illustrate application of hybrid multi-criteria group decision making (MCGDM method based on intuitionistic fuzzy theory and TOPSIS method.

Developing an efficient decision support system for non-traditional machine selection: an application of MOORA and MOOSRA

Directory of Open Access Journals (Sweden)

Asis Sarkar

2015-01-01

Full Text Available The purpose of this paper is to find out an efficient decision support method for non-traditional machine selection. It seeks to analyze potential non-traditional machine selection attributes with a relatively new MCDM approach of MOORA and MOOSRA method. The use of MOORA and MOOSRA method has been adopted to tackle subjective evaluation of information collected from an expert group. An example case study is shown here for better understanding of the said selection module which can be effectively applied to any other decision-making scenario. The method is not only computationally very simple, easily comprehensible, and robust, but also believed to have numerous subjective attributes. The rankings are expected to provide good guidance to the managers of an organization to select a feasible non-traditional machine. It shall also provide a good insight for the non-traditional machine manufacturer who might encourage research work concerning non-traditional machine selection.

Operator performance evaluation using multi criteria decision making methods

Science.gov (United States)

Rani, Ruzanita Mat; Ismail, Wan Rosmanira; Razali, Siti Fatihah

2014-06-01

Operator performance evaluation is a very important operation in labor-intensive manufacturing industry because the company's productivity depends on the performance of its operators. The aims of operator performance evaluation are to give feedback to operators on their performance, to increase company's productivity and to identify strengths and weaknesses of each operator. In this paper, six multi criteria decision making methods; Analytical Hierarchy Process (AHP), fuzzy AHP (FAHP), ELECTRE, PROMETHEE II, Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) are used to evaluate the operators' performance and to rank the operators. The performance evaluation is based on six main criteria; competency, experience and skill, teamwork and time punctuality, personal characteristics, capability and outcome. The study was conducted at one of the SME food manufacturing companies in Selangor. From the study, it is found that AHP and FAHP yielded the "outcome" criteria as the most important criteria. The results of operator performance evaluation showed that the same operator is ranked the first using all six methods.

The Interval-Valued Triangular Fuzzy Soft Set and Its Method of Dynamic Decision Making

Directory of Open Access Journals (Sweden)

Xiaoguo Chen

2014-01-01

Full Text Available A concept of interval-valued triangular fuzzy soft set is presented, and some operations of “AND,” “OR,” intersection, union and complement, and so forth are defined. Then some relative properties are discussed and several conclusions are drawn. A dynamic decision making model is built based on the definition of interval-valued triangular fuzzy soft set, in which period weight is determined by the exponential decay method. The arithmetic weighted average operator of interval-valued triangular fuzzy soft set is given by the aggregating thought, thereby aggregating interval-valued triangular fuzzy soft sets of different time-series into a collective interval-valued triangular fuzzy soft set. The formulas of selection and decision values of different objects are given; therefore the optimal decision making is achieved according to the decision values. Finally, the steps of this method are concluded, and one example is given to explain the application of the method.

Method for making an improved magnetic encoding device

Science.gov (United States)

Fox, Richard J.

1981-01-01

A magnetic encoding device and method for making the same are provided for use as magnetic storage mediums in identification control applications which give output signals from a reader that are of shorter duration and substantially greater magnitude than those of the prior art. Magnetic encoding elements are produced by uniformly bending wire or strip stock of a magnetic material longitudinally about a common radius to exceed the elastic limit of the material and subsequently mounting the material so that it is restrained in an unbent position on a substrate of nonmagnetic material. The elements are spot weld attached to a substrate to form a binary coded array of elements according to a desired binary code. The coded substrate may be enclosed in a plastic laminate structure. Such devices may be used for security badges, key cards, and the like and may have many other applications.

KidReporter : a method for engaging children in making a newspaper to gather user requirements

NARCIS (Netherlands)

Bekker, M.M.; Beusmans, J.; Keyson, D.V.; Lloyd, P.A.; Bekker, M.M.; Markopoulos, P.; Tsikalkina, M.

2002-01-01