Produto Verde: Uma Análise a partir do Ecodesign Pilot e da Teia das Estratégias do Ecodesign

Directory of Open Access Journals (Sweden)

Isabel Joselita Barbosa da Rocha Alves

2015-04-01

Full Text Available Este estudo objetivou analisar através do uso das ferramentas de ecodesign: Ecodesign PILOT e Teia das Estratégias do Ecodesign, se o banco Carambola, concebido como produto verde é de fato “verde”. Os dados coletados junto ao idealizador do produto revelaram que os processos de extração e de produção de matérias-primas causam a maior parte dos impactos ambientais do produto. Contudo, destaca-se que nas demais fases do ciclo de vida os aspectos ambientais não são intensivos e que todas as estratégias apresentam baixa prioridade. Assim, pode-se concluir que o produto, com base nestas ferramentas, pode ser considerado verde.

From energy efficiency towards resource efficiency within the Ecodesign Directive

DEFF Research Database (Denmark)

Bundgaard, Anja Marie; Mosgaard, Mette; Remmen, Arne

2017-01-01

on the most significant environmental impact has often resulted in a focus on energy efficiency in the use phase. Therefore, the Ecodesign Directive should continue to target resource efficiency aspects but also consider environ- mental aspects with a large improvement potential in addition to the most...... significant environmental impact. For the introduction of resource efficiency requirements into the Ecodesign Directive, these requirements have to be included in the preparatory study. It is therefore recommended to broaden the scope of the Methodology for the Ecodesign of Energy-related products and the Eco......The article examines the integration of resource efficiency into the European Ecodesign Directive. The purpose is to analyse the processes and stakeholder interactions, which formed the basis for integrating resource efficiency requirements into the implementing measure for vacuum cleaners...

Using Empirical Data To Build An Advisory Tool For Ecodesign

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Evans, S.

1999-01-01

allows for the consideration of environmental issues in every stage of the product development process, an exploratory study sought to identify the various stages that companies travelled through when implementing eco-design principles. The electrical/electronics industry was the chosen subject...... for the study.Results from this empirical research revealed that there is a common sequence of events that many companies go through when integrating eco-design into their product development processes, as presented in the model of eco-design integration in this paper. This sequence of events would be easily...... recognised by change management practitioners. Further to the common sequence of change in the companies, it was found that there were also common issues which companies aimed to improve when attempting to learn more about eco-design.Plotting the model of eco-design integration against the common issues...

"There is no carnival without samba": Revealing barriers hampering biodiversity-based R&D and eco-design in Brazil.

Science.gov (United States)

Jabbour, Charbel Jose Chiappetta; Jugend, Daniel; Jabbour, Ana Beatriz Lopes de Sousa; Govindan, Kannan; Kannan, Devika; Leal Filho, Walter

2018-01-15

Considering the unique relevance of Brazilian biodiversity, this research aims to investigate the main barriers to biodiversity-based R&D and eco-design development in a leading national company which has been commended for its innovation and sustainability. The methodology for this research was based on on-location visits, in-depth interviews, and consensus building among R&D, sustainability, and quality managers. A multi-criteria decision-making (MCDM) approach was adopted through interpretive structural modelling (ISM), a method that assists decision makers to transform complex models with unclear data into structural models. Some of the most influential barriers to biodiversity-based eco-design initiatives are "lack of legal incentive", "not enough demand from the market", and "not enough available knowledge/scientific data." The most relevant barrier was "no legal incentive" from government. Consequently, managers should concentrate their efforts in tackling those barriers that may affect other barriers known as 'key barriers'. Government should work decisively toward promoting a framework of legal incentives for bio-based eco-design; otherwise, metaphorically, "there is not carnival without the samba singer who pushes the rhythm". The results given here reveal the barriers for bio-based eco-design in a Brazilian leading company, and this is the first work combining ISM to barriers to biodiversity R&D and eco-design. Copyright © 2017 Elsevier Ltd. All rights reserved.

Driving behavioural change towards ecodesign integration: Nudging experiment in industry

OpenAIRE

Brones, Fabien; Gyldendal Melberg, Morten; Monteiro de Carvalho, Marly; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2014-01-01

This paper describes a research study conducted at Natura, a large Brazilian cosmetic company, in order to stimulate more systematic sustainable innovation practices by means of behavioural change. Within the “soft side” of ecodesign implementation, “nudging” is a novel approach brought from social sciences and policy making. An empirical experiment identified and tested employee motivations in combination with behavioural influences, in order to positively affect employees’ intention to prac...

A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

OpenAIRE

Luo Wang; Bin Shen

2017-01-01

With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line dat...

Ecodesign framework for developing wind turbines

DEFF Research Database (Denmark)

Bonou, Alexandra; Skelton, Kristen; Olsen, Stig Irving

2016-01-01

such as workshops, pilots, interviews and life cycle assessment were applied. The ecodesign framework was aligned with the company's formal product lifecycle management process. When combined with life cycle assessment, the framework can identify potential environmental improvements and contribute to coherent......Despite a wind turbines perceived environmental benefits, there are still many improvements that can be made in the product development process to improve its environmental performance across life cycles. This is especially important as the wind power industry continues to grow, both in volume...... and size, in response to increasing global market demands. Planning, implementing, monitoring, documenting and communicating product related environmental activities of wind turbines in a life cycle management context is the focal point of this article. The development and application of an ecodesign...

Feedback-Based Eco-Design for Integrating the Recency, Frequency, and Monetary Value of Eco-Efficiency into Sustainability Management

Directory of Open Access Journals (Sweden)

Rui Yang Chen

2016-09-01

Full Text Available Customer feedback is used to understand customer requirements. Early design phases require the consideration of items including manufacturing, the environment, and sustainability management. Therefore, it is crucial that eco-efficiency is taken into account in the early design phases. Traditionally, eco-efficiency is considered only in terms of eco-design issues, not customer requirements based on business values such as Recency, Frequency, and Monetary (RFM value. In the meantime, integrating innovation from eco-design is one important aspect. Here, I propose that customer feedback-based eco-efficiency and TRIZ-based innovation can be considered in early eco-design based on the RFM value for sustainability management. The analytic hierarchy process (AHP and fuzzy-based AHP were integrated to explore the relative weights of RFM variables for business value evaluation. The innovative method of the paper is using a TRIZ contradiction matrix associated with engineering parameters for eco-design. The experimental study has been carried out, and it meets the forecasting business value for green product usage. The business value was used as the decision-making factor in order to evaluate both environmental and marketing performance.

Ecodesign for a Circular Economy

DEFF Research Database (Denmark)

Bundgaard, Anja Marie

Directive plays an important role as it can set minimum performance requirements for several resource efficiency aspects. The studies of Bang & Olufsen and Tier1Asset revealed that existing ecodesign guidelines can be applied to improve the recyclability and the reconditioning potential, but it can...

EcoM2 web portal: Collecting empirical data and supporting companies' ecodesign implementation and management

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.; Rozenfeld, Henrique

2013-01-01

to that a comprehensive framework has been developed, with the aim of ensuring systematic management, implementation and continuous improvement of the ecodesign process. The framework, called Ecodesign Maturity Model (EcoM2), enables the diagnosis of the company’s ecodesign maturity profile; the identification...... of strengths and limitations; and the establishment of strategic roadmaps for improved ecodesign implementation. This paper describes the development of the EcoM2 web portal, which will allow for the framework to be tested on greater numbers of companies and at the same time to provide a quick diagnosis......Despite the recognition of the potential benefits of ecodesign, a promising approach to integrate environmental concerns into the product development process, its application has failed to reach large numbers of companies and sectors worldwide due to managerial difficulties. In response...

Reprojeto do contraforte: um caso de aplicação do ecodesign em manufatura calçadista Stiffener redesign: a case of eco-design application in footwear manufacture

Directory of Open Access Journals (Sweden)

Miriam Borchardt

2010-09-01

Full Text Available O objetivo deste artigo é relatar um caso de reprojeto de um produto existente, o contraforte injetado, focando na minimização do impacto ambiental e na redução de custo do produto final, o calçado esportivo. O estudo de caso ocorreu em empresa de componentes para calçados. Foram analisadas as práticas do ecodesign inseridas no projeto de produto da empresa e o modo como foram operacionalizadas. São discutidos, também, os motivos que levaram a empresa a adotar o ecodesign e as dificuldades e barreiras encontradas. O artigo faz uma revisão sobre ecodesign, apresenta a metodologia de pesquisa e os resultados da investigação. O contraforte reprojetado trouxe, para a empresa fabricante de calçados esportivos, parceira da empresa produtora do componente em estudo, diminuição significativa do uso de adesivos e solventes, além de uma redução de 9,7% no custo-alvo do processo de aplicação do contraforte no cabedal.The purpose of this paper is to analyze the application of eco-design in the redesign of a component from the footwear industry, the stiffener. The focus is on a reduction in the environmental impact and in the final cost of sports footwear. The case study took place in a company that produces footwear components. The eco-design practices considered during the product redesign in the company and their implementation were analyzed. We also investigate and discuss the reasons why the company was led to adopt eco-design and the difficulties and barriers encountered by designers in their application. The paper reviews eco-design, describes the research methodology and presents and discusses research findings. The redesigned stiffener brought the footwear assembly company a new manufacturing business partner, and led to a significant reduction in the requirement for adhesives and solvents, and a 9.7% reduction in the target-cost of the application process.

A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

Directory of Open Access Journals (Sweden)

Luo Wang

2017-07-01

Full Text Available With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line data and analyzed the data through descriptive analysis, factor analysis and correlation analysis. We found that Patagonia mainly uses organic, recycled, and traceable materials in their eco-product line development. We identified that the usage of eco-materials may significantly affect the number of color choices and product weight as well as gender difference, pattern design, product fit and online reviewers’ opinions at Patagonia. We argued that Patagonia should focus on functionality more than aesthetics in eco-design. We discussed how sustainable fashion firms should manage eco-design in the supply chain.

Implementing Measures of the Ecodesign Directive

DEFF Research Database (Denmark)

Andersen, Rikke Dorothea; Remmen, Arne

2011-01-01

on energy efficiency, power consumption, water consumption, information requirements and in some cases quality and performance issues. All IM only take the use phase of the products life time into consideration. The ambition level of the IM is analysed through a detailed case study of the IM for televisions....... It is argued that the IM have not succeeded in setting up sufficient ecodesign requirements, as only one life cycle phase and mainly one environmental impact category is addressed. The result of an analysis of televisions (TVs) on the market shows that new technologies have been developed that reduce power...... consumption significantly, and these technologies have been assessed not being mature enough to be included in the IM and the preparatory studies. Hence, it is concluded in this article that the process around the Ecodesign Directive has been too slow to be considered a driver for increasing material...

EcoDesign and future environmental impacts

DEFF Research Database (Denmark)

Jeswiet, Jack; Hauschild, Michael Zwicky

2005-01-01

This paper describes the relation between EcoDesign and Life Cycle Engineering; both include Product Engineering as a focal point. Product Engineering includes both product design and manufacture, two fields which are changing quickly. In addition, this paper shows where future changes can be exp...

Course Content for Life Cycle Engineering and EcoDesign

DEFF Research Database (Denmark)

Jerswiet, Jack; Duflou, Joost; Dewulf, Wim

2007-01-01

There is a need to create an awareness of Life Cycle Engineering and EcoDesign in Engineering students. Topics covered in an LCE/EcoDesign course will create an awareness of environmental impacts, especially in other design course projects. This paper suggests that an awareness of product impact...... upon the environment must be created at an early stage in undergraduate education. Deciding what to include in an LCE/EcoDesign Course can be difficult because there are many different views on the subject. However, there are more similarities than differences. All LCE/ EcoDesign Engineering courses...

Implementing the EcoDesign Directive in distribution transformers: First impacts review

Directory of Open Access Journals (Sweden)

Constantinos Charalampopoulos

2017-01-01

Full Text Available Since the commission of the Ecodesign Directive 2005/32/EC and the review of the Directive in 2009, there has been radical change on a multitude of aspects across the grid of electrical products. Because of their high volume sales, significant environmental impact and high potential for improvement, distribution transformers were set as a priority for the Ecodesign Working Period 2009–2011. As of July 2015, the requirements of the Directive affect every unit placed into market. This study addresses the impact that the Ecodesign Directive had on the distribution transformer industry financially, environmentally, and technologically. Data has been collected from various authoritative sources in order to give an inclusive picture of the current situation, and how it may improve by the measures presented. We need to ascertain both the importance of the existing difficulties and the validity of the actions and regulations in effect so far. The purpose of this paper will be considered fulfilled if the reader can clearly understand the current state of the distribution transformer industry, the problems that the Ecodesign Directive attempts to overcome, the methods of solving said problems, and the effects that those solutions can have in the near future.

Defining the challenges for ecodesign implementation in companies: development and consolidation of a framework

DEFF Research Database (Denmark)

Dekoninck, Elies A.; Domingo, Lucie; O'Hare, Jamie Alexander

2016-01-01

This study addresses the problem of the slow take-up of ecodesign in industry by identifying and categorising the implementation challenges faced by practitioners. Case studies from nine manufacturing companies from five different countries are reported based on interviews with key ecodesign pers...

Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector.

Science.gov (United States)

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia; Cook, Matthew

2006-04-15

The EU Directive on Waste Electrical and Electrical Equipment (WEEE) (2002/96/EC), to be implemented in stages from August 2004, attempts to tackle the growing quantity WEEE by making producers responsible for the costs of the collection and recycling of their products at the end of usable life. This is considered to give producers a financial incentive to reduce waste at source through eco-design. This link is, however, under-researched and little is known generally about the effectiveness of extended producer responsibility (EPR) and policies to promote it. This paper presents the findings of an exploratory study to address these important gaps in knowledge. Literature review was used to develop an analytical framework to explain the relationships between the drivers for eco-design and the role of policies to promote EPR. This was applied to eight case studies of firms from the European lighting sector. While quantitative data to confirm the link between EPR and eco-design were difficult to obtain, the case studies showed that EPR has had little effect on product development so far. Within the sector studied, most producers have been able to pass on incremental costs associated with EPR to customers with negligible effects on sales. This reflects perceptions in the lighting sector that, because demand for products is relatively price inelastic and the regulation affects all producers equally, EPR is unlikely to drive eco-design at least in the short run. The cases also showed that choice between individual and centrally provided waste recovery schemes rested on perceptions of relative costs and practicability. It was evident that other drivers, such as bans on hazardous substances, product declarations and supply chain pressures, were often more effective promoters of eco-design. Thus it seems a mix of policy measures is required rather than reliance on economic instruments alone.

Design for a sustainable society utilizing information and communication technologies (ICT) - proposal: a new EcoDesign method and its application

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, J. [Research Center for Advanced Science and Technology, the Univ. of Tokyo (Japan); Matsumoto, M. [Fundamental and Environment Labs., NEC Corp. (Japan)

2004-07-01

We discuss a new EcoDesign method, with a goal of improving the economy, and its application to a sustainable networked society. The new EcoDesign method differs from conventional EcoDesign in three respects: it utilizes a top-down approach, project-style research, and fact-finding and benchmarking. We systematize EcoDesign for a networked society from the viewpoint of technology and divide it into four components. Feasibility studies of the individual components reveal that if we promote ICT diffusion with EcoDesign in mind, we can suppress CO2 emissions and move towards a more sustainable society. (orig.)

Ecodesign of cosmetic formulae: methodology and application.

Science.gov (United States)

L'Haridon, J; Martz, P; Chenéble, J-C; Campion, J-F; Colombe, L

2018-04-01

This article describes an easy-to-use ecodesign methodology developed and applied since 2014 by the L'Oréal Group to improve the sustainable performance of its new products without any compromise on their cosmetic efficacy. Cosmetic products, after being used, are often discharged into the sewers and the aquatic compartment. This discharge is considered as dispersive and continuous. A consistent progress in reducing the environmental impact of cosmetic products can be achieved through focusing upon three strategic indicators: biodegradability, grey water footprint adapted for ecodesign (GWFE) and a global indicator, complementary to these two endpoints. Biodegradability represents the key process in the removal of organic ingredients from the environment. GWFE is defined herein as the theoretical volume of natural freshwater required to dilute a cosmetic formula after being used by the consumer, down to a concentration without any foreseeable toxic effects upon aquatic species. Finally, the complementary indicator highlights a possible alert on formula ingredients due to an unfavourable environmental profile based on hazard properties: for example Global Harmonization System/Classification, Labelling and Packaging (GHS/CLP) H410 classification or potential very persistent and very bioaccumulative (vPvB) classification. The ecodesign of a new cosmetic product can be a challenge as the cosmetic properties and quality of this new product should at least match the benchmark reference. As shown in the case studies described herein, new methodologies have been developed to maximize the biodegradability of cosmetic formulae, to minimize their GWFE and to limit the use of ingredients that present an unfavourable environmental profile, while reaching the highest standards in terms of cosmetic efficacy. By applying these methodologies, highly biodegradable products (≥ 95% based on ingredient composition) have been developed and marketed, with a low GWFE. This new

Measuring the implementation of ecodesign management practices: a review and consolidation of process-oriented performance indicators

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2017-01-01

Ecodesign plays an important role in manufacturing companies’ quest for improved sustainability performance. However, many ecodesign efforts are geared towards tackling single-issue discrete improvements, in contrast to operationalizing, measuring and acting upon the consistent improvement...... towards enhanced sustainability performance. In face of this challenge, this paper aims at providing organizations with a set of process-oriented indicators to supporting and enhancing ecodesign implementation and management. This research was grounded on a 2-phase approach to (i) cross...

Successive Transitions in Ecodesign

DEFF Research Database (Denmark)

Boks, Casper; McAloone, Tim C.

2008-01-01

In the past 15 years, stimulated by a growing environmental concern and awareness in the media, ecodesign, or design for environment, has expanded considerably as a scientific research area; from a group of opportunistic eco-pathfinders trying to optimise a product’s recyclability......, into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number of transitions; this is illustrated by discussing characteristic aspects of each transition, together providing a historic account of how academic...

EcoDesign and LCA approach toward sustainable micro products development

DEFF Research Database (Denmark)

De Grave, Arnaud; Olsen, Stig Irving; Hansen, Hans Nørgaard

2009-01-01

importance in the design of micro/nano products and of downscaled production pathways. In addition, the topic of EcoDesign, which has been used for a long time now in so-called “macro size”, is explained and the panel of tools used for designing products taking care of the environment will be investigated...... in the context of micro technology. Ecodesign and LCA take into account environmental impact of production of micro and nano products, but another important issue to include is the impact of such applications on human health. A particular focus has been put on the human health risks of nanoparticles....

Integrating reverse logistics and eco-design: a proposal for a new framework

Directory of Open Access Journals (Sweden)

Felipe Kich Gontijo

2014-07-01

Full Text Available The concepts of Reverse Logistics and Eco-design are discussed in this paper, suggesting that these applications are often treated differently, thus not being able to achieve a higher performance in relation to environmental sustainability. The reason is most reverse logistics applications have a repairer action, since their waste generation is not planned along with product design. The proposal shows how the two concepts can work together, describing the time of each application.Unfolding the two concepts into reverse channels concerning logistics and life cycle analysis of the product as per eco-design, an application model has been developed, promoting integration between the two practices, so that the reverse supply chain is planned along with the product.The result is the development of a model for implementing reverse logistics integrating eco-design, thus optimizing the reverse flow of waste.

KPIs for measuring the sustainability performance of ecodesign implementation into product development and related processes: a systematic literature review

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

, many difficulties still surround the implementation and management of ecodesign. The main challenges in embedding ecodesign into PDRP are: (i) the lack of support to select key performance indicators (KPI) to measure how well a company is being successful in ecodesign integration from a product......’s impact on the overall corporate behaviour.This research aims at presenting a comprehensive set of sustainability KPI to measure the ecodesign implementation into the PDRP by systematically reviewing the relevant literature regarding sustainability KPIs (social, economic and environmental dimensions......). The underlying research question is “which arethe KPIs for measuring sustainability of ecodesign integration into the product development and related processes?” This research excludes the indicators dealing directly and exclusively with product’s attributes and properties, such as energy and material...

A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers

International Nuclear Information System (INIS)

Ribeiro, I.; Peças, P.; Henriques, E.

2013-01-01

Highlights: • Life cycle framework to support material selection in Ecodesign. • Early design stage estimates and sensitivity analyses based on process-based models. • Sensitivity analysis to product geometry, industrial context and EoL scenarios. • Cost and environmental performance comparison – BDP vs. fossil based polymers. • Best alternatives mapping integrating cost and environmental performances. - Abstract: Nowadays society compels designers to develop more sustainable products. Ecodesign directs product design towards the goal of reducing environmental impacts. Within Ecodesign, materials selection plays a major role on product cost and environmental performance throughout its life cycle. This paper proposes a comprehensive life cycle framework to support Ecodesign in material selection. Dealing with new materials and technologies in early design stages, process-based models are used to represent the whole life cycle and supply integrated data to assess material alternatives, considering cost and environmental dimensions. An integrated analysis is then proposed to support decision making by mapping the best alternative materials according to the importance given to upstream and downstream life phases and to the environmental impacts. The proposed framework is applied to compare the life cycle performance of injection moulded samples made of four commercial biodegradable polymers with different contents of Thermo Plasticized Starch and PolyLactic Acid and a common fossil based polymer, Polypropylene. Instead of labelling materials just as “green”, the need to fully capture all impacts in the whole life cycle was shown. The fossil based polymer is the best economic alternative, but polymers with higher content of Thermo Plasticized Starch have a better environmental performance. However, parts geometry and EoL scenarios play a major role on the life cycle performance of candidate materials. The selection decision is then supported by mapping

Supporting the Development of Environmentally Sustainable PSS by Means of the Ecodesign Maturity Model

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

best practice for ecodesign implementation and management. The Ecodesign Maturity Model (EcoM2) is a management framework that supports manufacturing companies to consistently and systematicallyimplement ecodesign, based on a step-by-step approach. EcoM2 contains a database containing more than 600...... practices, categorized into management practices, operational practices and methods &tools. Currently, only two management practices of theEcoM2address PSS development. This paper aims to identify the best practices for PSS development, based on a literature review, followed by a presentation of a proposal......Despite their substantial potential for enabling increased environmental performance, product/service-systems (PSS) are not intrinsically environmentally sustainable. In order to ensure increased sustainability performance, PSSand related business models needs to be developed taking into account...

Ciclos : estudo de casos de ecodesign de jóias

OpenAIRE

Luiz Marcelo Straliotto

2009-01-01

Esta dissertação demonstra a possibilidade de aplicação dos princípios ecológicos no design de jóias com o objetivo de contribuir para a sistematização do conhecimento sobre o ecodesign de jóias. Num primeiro momento, a fundamentação teórica foi realizada por meio de pesquisa exploratória e descritiva, apoiada pela revisão e discussão da literatura técnica e científica sobre jóia, design de jóias e ecodesign de produtos. Essa etapa forneceu os subsídios para o desenvolvimento das jóias ecológ...

Ecodesign of Liquid Fuel Tanks

Science.gov (United States)

Gicevska, Jana; Bazbauers, Gatis; Repele, Mara

2011-01-01

The subject of the study is a 10 litre liquid fuel tank made of metal and used for fuel storage and transportation. The study dealt with separate life cycle stages of this product, compared environmental impacts of similar fuel tanks made of metal and plastic, as well as analysed the product's end-of-life cycle stage, studying the waste treatment and disposal scenarios. The aim of this study was to find opportunities for improvement and to develop proposals for the ecodesign of 10 litre liquid fuel tank.

Challenges for eco-design of emerging technologies: The case of electronic textiles

International Nuclear Information System (INIS)

Köhler, Andreas R.

2013-01-01

Highlights: • Recent innovations of electronic textiles and their end-of-life impacts are reviewed. • The properties of e-textiles are examined against Design for Recycling (DfR) principles. • Eco-design strategies for sustainable product development are discussed. • Compatibility standards for e-textiles are proposed as a waste prevention strategy. • Labelling of e-textiles is suggested as a measure to facilitate recycling. - Abstract: The combination of textile and electronic technologies results in new challenges for sustainable product design. Electronic textiles (e-textiles) feature a seamless integration of textiles with electronics and other high-tech materials. Such products may, if they become mass consumer applications, result in a new kind of waste that could be difficult to recycle. The ongoing innovation process of e-textiles holds opportunities to prevent future end-of-life impacts. Implementing eco-design in the technological development process can help to minimise future waste. However, the existing Design for Recycling (DfR) principles for textiles or electronics do not match with the properties of the combined products. This article examines possibilities to advance eco-design of a converging technology. DfR strategies for e-textiles are discussed from the background of contemporary innovation trends. Three waste preventative eco-design approaches for e-textiles are discussed: 1 harnessing the inherent advantages of smart materials for sustainable design; 2 establishing open compatibility standards; 3 labelling the e-textiles to facilitate their recycling. It is argued that life-cycle thinking needs to be implemented concurrent to the technological development process

Survey on Industry Requirements and Drivers for the Development of a Process-Related Certification Scheme for Ecodesign Implementation and Management

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; Jakobsen, Maja; McAloone, Tim C.

2014-01-01

Despite the existence of a large amount of eco-labels and eco-standards for product declaration, there is still limited research for the development of process-related certification schemes dealing with ecodesign implementation and management. In order to identify companies’ drivers, barriers...... and expected benefits in regards to the development and application of process-related ecodesign certification schemes, a survey was carried out inthis research. This paper presents and discusses the main results obtained in the survey, which comprised the participation of more than 100 professionals from more...... than 25 countries. The results will be employed for the development of an ecodesign process-related certification scheme based on the Ecodesign Maturity Model (EcoM2)....

O Produto Verde é Sempre “Verde”? Uma Análise do Bloco Cerâmico a partir do Ecodesign

Directory of Open Access Journals (Sweden)

Lúcia Santana de Freitas

2013-04-01

Full Text Available Nowadays, face to the environmental problems caused by the production and consumption exacerbated of materials and energy and of the generated residues, the activity of drawing green products is essential for the sustainable development. This study aimed at to analyze through the combined use of the ecodesign tools: Ecodesign PILOT and Web Strategies of the Ecodesign (TEE if a product designed as green it is in fact “green.” Theoretically focused on discussion of ecodesign, greenproducts and in the tools of used ecodesign, which contemplate all the stages of the cycle of life of the product. It is a case study, whose object was the Economic Ceramic Block. We used a semistructured interview and two questionnaires elaborated developed from the mentioned tools. As results, the Ecodesign PILOT classified the product as Tipo B, in other words, the production phase presents larger environmental load. With relationship to TEE, the optimization of post-use of the product was considered of high priority, this happens because of the company does not maintain a recycling politics of the product at the end of your useful life, given the impossibility of identifying the responsible for the generated residues. The other results of the two tools came convergent, showing that the product in fact can be considered as green.

Deployment and implementation of the Grundfos' sustainability strategy by means of the ecodesign maturity model

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.; Rozenfeld, Henrique

2014-01-01

Companies are increasingly realizing the needs and opportunities for implementing sustainability into their business processes and corporate culture. This paper describes the approach followed by Grundfos to deploy its Sustainability Strategy for the development of Sustainable Product Solutions......, by means of the Ecodesign Maturity Model (EcoM2), which included the diagnosis of their current maturity profile, the definition of a strategic roadmap for ecodesign implementation and the implementation of the defined projects....

Characterization of the State-of-the-art and Identification of Main Trends for Ecodesign Tools and Methods: Classifying Three Decades of Research and Implementation

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, T. C.; Rozenfeld, H.

2015-01-01

Ecodesign is a proactive management approach that integrates environmental considerations in product development and related processes (such as purchasing, marketing and research & development). Ecodesign aims to improve environmental performance of products throughout their life cycle, from raw...... material extraction and manufacturing to use and end-of-life. Over the last three decades, an intense development of new ecodesign methods and tools could be observed, but uptake by the industry remains a challenge. The purpose of this research is to perform a review of existing ecodesign tools and methods...... through a systematic literature review linked to bibliometric analyses, in order to explore the state of the art of ecodesign methods and tools and identify trends and opportunities in the field for the next decade....

An integrated factor analysis model for product eco-design based on full life cycle assessment

Energy Technology Data Exchange (ETDEWEB)

Zhou, Z.; Xiao, T.; Li, D.

2016-07-01

Among the methods of comprehensive analysis for a product or an enterprise, there exist defects and deficiencies in traditional standard cost analyses and life cycle assessment methods. For example, some methods only emphasize one dimension (such as economic or environmental factors) while neglecting other relevant dimensions. This paper builds a factor analysis model of resource value flow, based on full life cycle assessment and eco-design theory, in order to expose the relevant internal logic between these two factors. The model considers the efficient multiplication of resources, economic efficiency, and environmental efficiency as its core objectives. The model studies the status of resource value flow during the entire life cycle of a product, and gives an in-depth analysis on the mutual logical relationship of product performance, value, resource consumption, and environmental load to reveal the symptoms and potentials in different dimensions. This provides comprehensive, accurate and timely decision-making information for enterprise managers regarding product eco-design, as well as production and management activities. To conclude, it verifies the availability of this evaluation and analysis model using a Chinese SUV manufacturer as an example. (Author)

Redesign of steam turbine rotor blades and rotor packages – Environmental analysis within systematic eco-design approach

International Nuclear Information System (INIS)

Baran, Jolanta

2016-01-01

Highlights: • Systematic approach to eco-design of steam turbine rotor blades was applied. • Eco-innovative solutions are based on structural and technological change. • At the stage of detailed design the variants were analyzed using LCA. • Main achieved benefits: energy and material savings, lower environmental impact. • Benefits related to the possible scale of the solution practical application. - Abstract: Eco-design of steam turbine blades could be one of the possibilities of decreasing the environmental impact of energy systems based on turbines. The paper investigates the eco-design approach to elaboration of the rotor blades and packages. The purpose is to present the course of eco-design of the rotor blades and the rotor packages taking account of eco-design assumptions, solutions and the concept itself. The following eco-design variants of the rotor blades and the rotor packages are considered: elements of the rotor blades made separately (baseline variant of the rotor blades); elements of the rotor blades made of one piece of material; blades in packages made separately and welded (baseline variant of the rotor packages); packages milled as integral elements. At the stage of detailed design, the Life Cycle Assessment (LCA) is performed in relation to a functional unit – the rotor blades and packages ready for installation in a steam turbine, which is the stage of the turbine. The obtained results indicate that eco-innovative solutions for the turbine blades and packages could be achieved through structural and technological changes. Applying new solutions of the rotor blades may produce the following main benefits: 3.3% lower use of materials, 29.4% decrease in energy consumption at the manufacturing stage, 7.7% decrease in the environmental impact in the life cycle. In relation to the rotor packages, the following main benefits may be achieved: 20.5% lower use of materials, 25.0% decrease in energy consumption at the production stage, 16

The assessment of eco-design with a comprehensive index incorporating environmental impact and economic profit

Science.gov (United States)

Yang, Shuo; Fu, Yun; Wang, Xiuteng; Xu, Bingsheng; Li, Zheng

2017-11-01

Eco-design is an advanced design approach which plays an important part in the national innovation project and serves as a key point for the successful transformation of the supply structure. However, the practical implementation of the pro-environmental designs and technologies always faces a dilemma situation, where some processes can effectively control their emissions to protect the environment at relatively high costs, while others pursue the individual interest in making profit by ignoring the possible adverse environmental impacts. Thus, the assessment on the eco-design process must be carried out based on the comprehensive consideration of the economic and environmental aspects. Presently, the assessment systems in China are unable to fully reflect the new environmental technologies regarding their innovative features or performance. Most of the assessment systems adopt scoring method based on the judgments of the experts, which are easy to use but somewhat subjective. The assessment method presented in this paper includes the environmental impact (EI) assessment based on LCA principal and willingness-to-pay theory, and economic profit (EP) assessment mainly based on market price. The results from the assessment are in the form of EI/EP, which evaluate the targeted process from a combined perspective of environmental and economic performance. A case study was carried out upon the utilization process of coal fly ash, which indicates the proposed method can compare different technical processes in an effective and objective manner, and provide explicit and insightful suggestions for decision making.

Economic benefits of the EU Ecodesign Directive. Improving European economies

Energy Technology Data Exchange (ETDEWEB)

Molenbroek, E.; Cuijpers, M.; Blok, K.

2012-04-15

The EU Ecodesign Directive aims at reducing the environmental impact of a number of products sold in the EU, with emphasis on their energy consumption. Ecofys investigated economic benefits related to the Directive. A correct implementation of the EU Ecodesign Directive would yield yearly savings of up to 600 TWh of electricity and 600 TWh of heat in 2020. In addition to these environmental benefits, this study identified important economic advantages like: Net savings for European consumers and businesses of 90 billion euro per year (1% of EU's current GDP) in the year 2020; Reinvesting these savings in other sectors of the economy would result in the creation of one million jobs; Dependency on imports of energy would be reduced by 23% and 37% for natural gas and coal, respectively. This means the EU could slash natural gas imports from Russia by more than half and imports of coal from Russia could be stopped altogether.

Ecodesign - How to Unfold the Potential Synergy between the EuP, WEEE and RoHS Directives

DEFF Research Database (Denmark)

Andersen, Rikke Dorothea; Remmen, Arne

The amount, complexity and variety of products introduced to the European market are increasing and products are more than ever traded globally. This development challenges the approach to regulate and stimulate the innovation of cleaner products. The EU has responded by introducing Integrated Pr...... Directive. The focus of this paper is the potential synergy between the three normative, so-called eco-design directives, and to what extent the EU has accomplished to integrate eco-design in the different directives and voluntary instruments....

POTENTIAL FOR RARE EARTH ELEMENT RESOURCE EFFICIENCY IMPROVEMENTS IN PERMANENT MAGNET MOTORS THROUGH AN EXTENSION OF THE ELECTRIC MOTOR PRODUCT GROUP REGULATION UNDER THE EU ECODESIGN DIRECTIVE

OpenAIRE

Machacek, Erika; Dalhammar, Carl

2013-01-01

It has been proposed that the EU Ecodesign Directive can promote resource efficiency through relevant ecodesign requirements. This paper examines the potential for rare earth element (REE) resource efficiency improvements in the event the current regulation for electric motors under the Ecodesign Directive is to be extended to comprise REE-based permanent magnet motors. The research is based on literature studies, questionnaires and semi-structured interviews with representatives from industr...

From EcoDesign to Industrial Metabolism: Redefinition of Sustainable Innovation and Competitive Sustainability

DEFF Research Database (Denmark)

Taps, Stig B.; Brunø, Thomas Ditlev; Nielsen, Kjeld

2013-01-01

evaluation of the most commonly tools and techniques in use and suggests a redefinition of the concept of EcoDesign by integrating End-of-Life activities to gain industrial metabolism. This approach takes a broader innovation perspective, necessary to construct a sustainable innovation community...

Process-related key performance indicators for measuring sustainability performance of ecodesign implementation into product development

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

Developing products with improved environmental performance is regarded as a crucial component of companies' commitment towards sustainable development. The potential benefits derived from ecodesign are constantly highlighted in the literature, and go beyond the pure environmental dimension. Howe...

Life cycle environmental evaluation of kettles: Recommendations for the development of eco-design regulations in the European Union.

Science.gov (United States)

Gallego-Schmid, Alejandro; Jeswani, Harish Kumar; Mendoza, Joan Manuel F; Azapagic, Adisa

2018-06-01

Between 117 and 200 million kettles are used in the European Union (EU) every year. However, the full environmental impacts of kettles remain largely unknown. This paper presents a comprehensive life cycle assessment of conventional plastic and metallic kettles in comparison with eco-kettles. The results show that the use stage contributes 80% to the impacts. For this reason, the eco-kettle has over 30% lower environmental impacts due to a greater water efficiency and related lower energy consumption. These results have been extrapolated to the EU level to consider the implications for proposed eco-design regulations. For these purposes, the effects on the impacts of durability of kettles and improvements in their energy and water efficiency have been assessed as they have been identified as two key parameters in the proposed regulations. The results suggest that increasing the current average durability from 4.4 to seven years would reduce the impacts by less than 5%. Thus, improving durability is not a key issue for improving the environmental performance of kettles and does not justify the need for an eco-design regulation based exclusively on it. However, improvements in water and energy efficiency through eco-design can bring relevant environmental savings. Boiling the exact amount of water needed would reduce the impacts by around a third and using water temperature control by further 2%-5%. The study has also considered the effects of reducing significantly the number of kettles in use after the UK (large user of kettles) leaves the EU and reducing the excess water typically boiled by the consumer. Even under these circumstances, the environmental savings justify the development of a specific EU eco-design regulation for kettles. However, consumer engagement will be key to the implementation and achievement of the expected environmental benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

A MEPS is a MEPS is a MEPS. Comparing Ecodesign and Top Runner schemes for setting product efficiency standards

Energy Technology Data Exchange (ETDEWEB)

Siderius, P.J.S. [NL Agency, Croeselaan 15, P.O. Box 8242, 3503 RE Utrecht (Netherlands); Nakagami, H. [Jyukankyo Research Institute, 3-29, Kioi-cho, Chiyoda-ku Tokyo, 102-0094 (Japan)

2013-02-15

Both Top Runner in Japan and Ecodesign in the European Union are schemes to set requirements on the energy efficiency (minimum efficiency performance standards, MEPS) of a variety of products. This article provides an overview of the main characteristics and results of both schemes and gives recommendations for improving them. Both schemes contribute significantly to the energy efficiency targets set by the European Commission and the Japanese government. Although it is difficult to compare the absolute levels of the requirements, comparison of the relative improvements and of the savings on household electricity consumption (11 % in Japan, 16 % in the EU) suggest they are in the same range. Furthermore, the time needed to set or review requirements is in both schemes considerable (between 5 and 6 years on average) and the manageability increasingly will become a challenge. The appeal of the Top Runner approach is that the most efficient product (Top Runner) sets the standard for all products at the next target year. Although the Ecodesign scheme includes the elements for a Top Runner approach, it could exploit this principle more explicitly. On the other hand, the Top Runner scheme could benefit by using a real minimum efficiency performance standard instead of a fleet average. This would make the monitoring and enforcement more simple and transparent, and would open the scheme for products where the market situation is less clear.

Ecodesign in the context of customer's and producer's point of view

OpenAIRE

Maletič, Matjaž; Maletič, Damjan; Gomišček, Boštjan

2017-01-01

The present study reviews the attitudes and behaviours of the customers toward products which are “respectful” for the environment. To address the issue in a wider perspective, this paper also encompasses various aspects of ecodesign from producer’s point of view. Two surveys were conducted. The purpose of the first survey was to investigate the awareness and intention of the Slovenian customers to purchase green products, their perceptions and attitudes towards green products. The second sur...

An ecodesign method for reducing the effects of hazardous substances in the product lifecycle

Science.gov (United States)

Simanovska, J.; Valters, K.; Bažbauers, G.; Luttropp, C.

2012-10-01

Growing evidence on the indoor and outdoor pollution caused by the flow of man-made products urges that the content and leaching of hazardous substances from products be minimised. One of the ways to reduce the potential adverse impacts caused by these substances could be via ecodesign - i.e. through the consideration of lifecycle-related environmental aspects during the product development. The authors’ review of the existing ecodesign methods highlights the weakness of these methods in identifying and assessing the health-related and environmental impacts of hazardous substances contained in products, especially with regard to the exposure assessment. Therefore, a new, semi-quantitative screening ecodesign method applicable for different types of products has been developed. The method ranks the most severe hazards based on the classification according to the Globally Harmonised System together with the exposure evaluation as well as integrates the aspects of material efficiency. This method is suitable for use in the product development process, requiring decisions to be made based on limited information while integrating the main principles of a scientific risk assessment for chemicals. Application of the method is demonstrated with a case study on products made of plywood. The method makes it possible to identify the needs for and elaboration of ecodesign proposals, and fosters communication and information exchange throughout the supply chain. Augošs pierādījumu daudzums par produktu sastāvā esošo kaitīgo ķīmisko vielu nelabvēlīgo ietekmi uz vidi un cilvēku veselību liecina par nepieciešamību samazināt šādu vielu saturu produktos un izdalīšanos no tiem, ko varētu realizēt ar ekodizaina palīdzību. Pārskatot zinātniskās publikācijas ekodizaina jomā, konstatēts, ka pašreiz ekodizaina metodes nepilnīgi nodrošina materiālu sastāvā esošo vielu kaitīgās ietekmes uz cilvēku veselību un apkārtējo vidi novēršanu. T�

An investigation into the Eco-design of Energy Using Products directive.

Science.gov (United States)

Meech, Christina Goodrick

2006-01-01

This study reviews the eco-design of energy using products directive and additional legislation on the way that waste electrical and electronic equipment should be disposed of, and how this may influence the future product design of appliances. During the investigation 'lifecycle analysis' and consumers' responses to this legislation, and the industry were also reviewed. Finally, for future product designers who work with electrical and electronic equipment some guidelines and rules are given to consider while designing for the environment and sustainability.

An Eco-Design and Innovation Feasibility Study of Low-Carbon Illumination Technologies for the Tertiary Sector in Denmark

DEFF Research Database (Denmark)

Bjarklev, Araceli

objective is to contribute by discussing the elements that a new framework for eco-design and innovation feasibility studies could provide to the evaluation of technologies that will facilitate a response to the climate, energy and economic development challenges the illumination sector in Denmark faces......This thesis presents an eco-design and innovation feasibility study that focuses on the Danish lighting sector. The main general research objective is: To identify possibilities for further innovations that can contribute to reducing CO2 emissions and reduce the use of fossil fuels. An integrated...... today. To achieve these goals, this study integrates three different levels of systemic analysis: Firstly, the product system analysis, where technological possibilities to improve energy efficiency are discussed and new technological improvements identified. Secondly, it takes into consideration...

Bridging the Gap between Eco-Design and the Human Thinking System

Directory of Open Access Journals (Sweden)

Mona Komeijani

2016-03-01

Full Text Available Technological progress has enabled widespread adoption and use of consumer electronics, changing how global society lives and works. This progress has come with immense environmental cost, including extraction of scarce materials, consumption of fossil fuels, and growing e-waste challenges. Eco-design has emerged as a promising approach to reduce the environmental footprint of electronics by integrating sustainability-oriented decisions early in the product realization process. However, most approaches focus on the product itself, not on the consumer who ultimately decides how to purchase, use, maintain, and dispose of the device. This article presents a new framework to guide designers in developing products with features that encourage consumers to use them in an environmentally sustainable manner. The Sustainable Behavior Design (SBD framework links common design concepts (ergonomic, emotional, preventative, and interaction design with core aspects of the human thinking system to create features to make users aware of their behavior and decisions (reflective thinking or result in sustainable behaviors even when users are unaware (automatic thinking. The SBD framework is demonstrated using a case study on a smartphone, a high demand product. The reimagined smartphone design integrates solutions addressing both automatic and reflective thinking systems, potentially reducing life cycle impacts by almost 30%.

EU ecodesign regulation. More as only a light bulb ban; EU-Oekodesign-Richtlinie. Mehr als ein Gluehbirnenverbot

Energy Technology Data Exchange (ETDEWEB)

Fischer, Corinna [Oeko-Institut e.V., Freiburg (Germany)

2011-10-15

Within a broader public, the EU Ecodesign Directive (Directive 2009/125/EC) was known and notoriously as a 'light bulb ban'. This resulted in strong emotions. But it has shown an impact in many other areas - usually unnoticed and often for the financial and practical benefits of the consumers. Now, the EU Commission wants to go one step further.

Follow-up study of the preparatory study for Ecodesign and Energy Label for Household Dishwashers

OpenAIRE

BOYANO LARRIBA ALICIA; MOONS HANS; VILLANUEVA KRZYZANIAK ALEJANDRO; GRAULICH KATHRIN; RÜDINAUER INA; ALBORZI FARNAZ; HOOK INA; STAMMINGER RAINER

2017-01-01

Starting in 2014, the Commission has undertaken a review study of the household dishwashers regulations (Ecodesing regulation and Energy Label regulation). The conclusions of this study are updated in this report and will be presented to stakeholders at the meeting of the Consultation Forum established under Article 18 of the Ecodesign Directive 2009/125/EC, to be held 22th November 2017. In addition, this report includes new forecast scenarios at the light of the release of the Energy Labell...

Investigation of the Use of Ecodesign Methods and Tools in the Electrical and Electronics Industries of Thailand

OpenAIRE

Samuelsson, Erik

2008-01-01

This investigation strives to determine the level of ecodesign awareness as well as to map the use of methods and tools for this concept in the electrical and electronics industries of Thailand. The foundation of the thesis is eight semi-structured qualitative research interviews performed with various people at Thai organisations, an electronics manufacturer in Thailand, and experts from Swedish, Danish and Thai universities. The research method has yielded the following results: The level o...

The ecodesign and planning of sustainable neighbourhoods: the Vallbona case study (Barcelona

Directory of Open Access Journals (Sweden)

Farreny, R.

2011-10-01

Full Text Available Global sustainability is increasingly an issue of urban sustainability, being essential to encourage more benign trajectories of urbanisation. For this, there is need for a framework that could aid in the process of designing and redesigning (retrofitting cities. The aim of this paper is to present and describe the methodology of urban ecodesign, which is characterized by a systematic incorporation of environmental life cycle considerations into the design of urban systems. The paper presents a case study of neighbourhood ecodesign from the city of Barcelona (Vallbona neighbourhood. This practical experience shows that the inclusion of sustainability criteria at an early stage of the design and planning of urban systems is the best strategy for environmental protection.In addition; a methodological framework is described in order to provide planners with a structured way of designing urban settlements so as to move towards sustainable urban environments.

La sostenibilidad global es cada vez más un tema de sostenibilidad urbana. Por este motivo, es necesario un marco de trabajo que pueda ayudar en el proceso de diseño y rediseño (rehabilitación de nuestras ciudades. El objetivo de este trabajo es presentar y describir la metodología de ecodiseño adaptada a los entornos urbanos, la cual se caracteriza por la incorporación sistemática de las consideraciones ambientales a lo largo de su ciclo de vida. El documento presenta un caso de estudio de ecodiseño del barrio de Vallbona (Barcelona. Esta experiencia demuestra que la inclusión de criterios de sostenibilidad en las etapas iniciales de diseño y planificación de los sistemas urbanos es la mejor estrategia para la prevención ambiental. Además, se presenta un marco metodológico con el fin de proporcionar a los planificadores una forma estructurada de diseño de los asentamientos urbanos que les permita avanzar hacia entornos urbanos más sostenibles.

Ecodesign Maturity Model as a framework to support the transition towards ISO 14.001: 2015 certification

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Currently, the certification standard for Environmental Management Systems (EMS) ISO 14.001:2011 is under a major revision process, regarding its structure and requirements. The current draft entails major changes related to the integration of the product life cycle perspective into business...... processes, such as product development and value chain. The standard is expected to be launched in late 2015 with a 3-year transition period. This paper explores the application of the Ecodesign Maturity Model (EcoM2) as a framework to support the planning and implementation of ISO 14.001:2015, based...

Making Wireless Terminals Simpler

DEFF Research Database (Denmark)

Christensen, Søren Skovgaard; Popovski, Petar; De Carvalho, Elisabeth

2005-01-01

equalization in the downlink, which these requirements lead to. We propose to solve the problem by applying pre-processing at the base station, thereby rendering the terminal simple. We establish a general MIMO block transmission model, and derive different transmit/receive filters, based on the Linear Minimum...

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

International Nuclear Information System (INIS)

González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

2011-01-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

2011-12-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

Science.gov (United States)

González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

2011-12-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

Chi-squared: A simpler evaluation function for multiple-instance learning

National Research Council Canada - National Science Library

McGovern, Amy; Jensen, David

2003-01-01

...) but finds the best concept using the chi-square statistic. This approach is simpler than diverse density and allows us to search more extensively by using properties of the contingency table to prune in a guaranteed manner...

Faster and Simpler Approximation of Stable Matchings

Directory of Open Access Journals (Sweden)

Katarzyna Paluch

2014-04-01

Full Text Available We give a 3 2 -approximation algorithm for finding stable matchings that runs in O(m time. The previous most well-known algorithm, by McDermid, has the same approximation ratio but runs in O(n3/2m time, where n denotes the number of people andm is the total length of the preference lists in a given instance. In addition, the algorithm and the analysis are much simpler. We also give the extension of the algorithm for computing stable many-to-many matchings.

Practical Eco-Design and Eco-Innovation of Consumer Electronics—the Case of Mobile Phones

Directory of Open Access Journals (Sweden)

Anders S. G. Andrae

2016-02-01

Full Text Available Annually, it is estimated that about 4 billion units of consumer electronics for mobile communications are produced worldwide. This could lead to various ecological imbalances unless the design and disposal of the products are handled optimally. To illustrate how industry looks at and responds to the increasing social awareness, this article describes how sustainability is successfully implemented in practice at a large Chinese company, developing and producing various kinds of electronic products used for communication. It also describes how a variety of eco-innovations and business models contribute to reducing the environmental impact; for example, through increased recovery and recycling. A new kind of eco-design procedure is presented along with a new methodology which shows how a mobile phone gradually becomes more sustainable from one generation to the next. The issues with and set-up of new eco-labeling schemes for mobile phones, eco-rating, is described in detail. The conclusion is that due to high competition between companies, the industry acts resourcefully and a lot is done to the save the ecological environment.

Analysis of proposed eco-design requirements for boilers and water heaters. Paper within the framwork of the ''Material Efficiency and Resource Conservation'' (MaRess) Project - Task 14

Energy Technology Data Exchange (ETDEWEB)

Barthel, Klaus; Franke, Moritz [Wuppertal Institute for Climate, Environment and Energy, Wuppertal (Germany)

2009-12-15

In 2005, the European Union released the EuP Directive focusing on ecodesign requirements for energy-using products (2005/32/EC: EU Parliament and Council of the EU 2005). This directive, also called Ecodesign Directive, is a framework directive establishing a structure in which so-called implementing measures define specific requirements for placing products on the market and/or putting them into service within the internal European market. These requirements can be environmental performance standards (e.g. minimum energy efficiency or emission standards) and labelling or information requirements. Some existing European directives are already declared as being implementing measures of the Ecodesign Directive. Additionally, new implementing measures have been and will further be developed. Product-specific preparatory studies on behalf of the European Commission provide the basis for this. The preparatory studies for boilers (Lot 1) and water heaters (Lot 2) have been conducted from February 2006 to October 2007 by Van Holsteijn en Kemna (VHK). Based on the preparatory studies, the EU Commission has released several working documents (WD) on possible ecodesign requirements for boilers and water heaters at the beginning of 2008. Following these documents, boilers and water heaters comprise gas-fired, oil-fired and electric central heating (CH) (combi-) boilers / dedicated water heaters in combination with capturing solar thermal energy or ambient heat1. The requirements contain basically energy labelling measures, minimum efficiency performance standards and limits on NOx emissions. An ''Ecoboiler Model'' resp. an ''Eco Hot Water Model'' has been elaborated within the preparatory studies. These models are a crucial part of the requirements and allow for calculation of the efficiencies of boilers and water heaters. Since the models have a high degree of complexity, the Federal Environment Agency (UBA) has asked Wuppertal

From LCA to PSS – Making leaps towards sustainability by applying product/service-system thinking in product development

DEFF Research Database (Denmark)

Bey, Niki; McAloone, Timothy Charles

2006-01-01

for optimisations on all system levels. However, as the act of ecodesign conventionally focuses on physical products, the search for potential optimisations is usually directed ‘downwards’, i.e. towards lower system levels, resulting in optimised components within products rather than optimised products within...... their surrounding systems. This paper will exemplify that when broadening the ecodesign horizon to environmental product/service-system (PSS) design, there is a better possibility of applying a system-oriented life cycle thinking approach, and therefore a potential to yield extreme improvements towards...

Simpler criterion on W state for perfect quantumstate splitting and quantum teleportation

Institute of Scientific and Technical Information of China (English)

无

2009-01-01

A simpler criterion is presented to judge whether a W state can be taken as quantum channel forperfectly splitting or teleporting an arbitrary single-qubit state. If the W state is usable,the detailed manipulations in the two quantum information processes are amply shown. Moreover,some relevant discussions are made.

Improving children's affective decision making in the Children's Gambling Task.

Science.gov (United States)

Andrews, Glenda; Moussaumai, Jennifer

2015-11-01

Affective decision making was examined in 108 children (3-, 4-, and 5-year-olds) using the Children's Gambling Task (CGT). Children completed the CGT and then responded to awareness questions. Children in the binary_experience and binary_experience+awareness (not control) conditions first completed two simpler versions. Children in the binary_experience+awareness condition also responded to questions about relational components of the simpler versions. Experience with simpler versions facilitated decision making in 4- and 5-year-olds, but 3-year-olds' advantageous choices declined across trial blocks in the binary_experience and control conditions. Responding to questions about relational components further benefited the 4- and 5-year-olds. The 3-year-olds' advantageous choices on the final block were at chance level in the binary_experience+awareness condition but were below chance level in the other conditions. Awareness following the CGT was strongly correlated with advantageous choices and with age. Awareness was demonstrated by 5-year-olds (all conditions) and 4-year-olds (binary_experience and binary_experience+awareness) but not by 3-year-olds. The findings demonstrate the importance of complexity and conscious awareness in cognitive development. Copyright © 2015 Elsevier Inc. All rights reserved.

Eco-design of low energy mechanical milling through implementation of quality function deployment and design for sustainability

Science.gov (United States)

Rashid, Muhammad Hanif Abd; Nor, Nik Hisyamudin Muhd; Selamat, Siti Norhana; Hassan, Mohd Fahrul; Rahim, Abd Khalil Abd; Ahmad, Mohd Fauzi; Ismail, Al Emran; Omar, Badrul; Mokhtar, Mohd Faiz; Turan, Faiz Mohd; Yokoyama, Seiji

2017-04-01

Malaysia as a developing country favor energy demand by years which created mainly from fossil fuel. Unfortunately, the action leads to significant increment in carbon dioxide (CO2) emission that causing the global warming. The most promising mitigation strategy is by deploying Carbon Capture and Storage (CCS) technology where mineral carbonation was identified as the safest method for permanent storage and does not require continuous monitoring. Accordingly, National Green Technology was launched in 2009 to support the growth of green technology development in Malaysia as a carbon mitigation strategy. Thus, this paper aims to propose the development of a conceptual eco-design for Low Energy Mechanical Milling (LEMM). The concept was proposed by using the Quality Function Deployment (QFD) tool with combination of sustainability determinants (DFS) namely economic, environmental and social which evaluated using Solidworks 2015 sustainability assessment. The results show the new product targets for LEMM in prior on energy consumption (MJ), selling price (MYR), material cost (MYR), carbon footprint (kg CO2) with weightage of 5.2, 4.2, 3.6 and 3.6 respectively. The implementation of DFS criteria into the QFD promote to reduce material used by 16%, 35% reduction of carbon footprint, 28% less energy consumption, 28% lower air acidification, 77% of water eutrophication declined and increased recyclability by 15%.

Small modular reactors: Simpler, safer, cheaper?

International Nuclear Information System (INIS)

Vujić, Jasmina; Bergmann, Ryan M.; Škoda, Radek; Miletić, Marija

2012-01-01

Nuclear energy can play a very significant long-term role for meeting the world’s increasing energy demands, while simultaneously addressing challenges associated with global climate and environmental impact. Many nations of the world, particularly the Asia/Pacific Rim countries, are actively engaged in a major expansion of their nuclear energy complex. The degree to which nuclear energy can address long-term energy needs, either globally or regionally, will be dictated by the pace and adequacy of technical and policy solutions for waste, safety, security, and non-proliferation issues, as well as the capital cost of construction. Small Modular Reactors (SMRs) could successfully address several of these issues. SMRs offer simpler, standardized, and safer modular design by being factory built, requiring smaller initial capital investment, and having shorter construction times. The SMRs could be small enough to be transportable, could be used in isolated locations without advanced infrastructure and without power grid, or could be clustered in a single site to provide a multi-module, large capacity power plant. This paper summarizes some of the basic features of SMRs for early deployment, several advanced SMR concepts, and points out the benefits and challenges in regulatory, economical, safety and security issues. -- Highlights: ► We held a summer forum on SMR technologies at UC Berkeley in July 2010. ► Advantages and disadvantages, technical and economic, of each design were discussed. ► Further literature searches were also done and this paper summarizes prominent designs. ► We conclude SMRs have no large problems preventing their introduction into the nuclear market.

Where’s eco-design going?

DEFF Research Database (Denmark)

McAloone, Timothy Charles

2000-01-01

to environmental problems. We use the lessons learned from these systematic attempts to construct methods for preventing the problems from occurring in the first instance. Further to this, some environmental ‘leaders’ are beginning to make pro-active attempts at using the environmental credentials...

Design for Sustainability : Current Trends in Sustainable Product Design and Development

NARCIS (Netherlands)

Clark, G.; Kosoris, J.; Nguyen Hong, L.; Crul, M.

2009-01-01

The Design for Sustainability (D4S) concept outlines methodologies for making sustainable improvements (social, economic and environmental) to products by applying elements of life cycle thinking. D4S builds on the work of ecodesign to include economic and social concerns, and its methodology

Testing, Modeling, and Monitoring to Enable Simpler, Cheaper, Longer-lived Surface Caps

International Nuclear Information System (INIS)

Piet, S. J.; Breckenridge, R. P.; Burns, D. E.

2003-01-01

Society has and will continue to generate hazardous wastes whose risks must be managed. For exceptionally toxic, long-lived, and feared waste, the solution is deep burial, e.g., deep geological disposal at Yucca Mtn. For some waste, recycle or destruction/treatment is possible. The alternative for other wastes is storage at or near the ground level (in someone's back yard); most of these storage sites include a surface barrier (cap) to prevent downward water migration. Some of the hazards will persist indefinitely. As society and regulators have demanded additional proof that caps are robust against more threats and for longer time periods, the caps have become increasingly complex and expensive. As in other industries, increased complexity will eventually increase the difficulty in estimating performance, in monitoring system/component performance, and in repairing or upgrading barriers as risks are managed. An approach leading to simpler, less expensive, longer-lived, more manageable caps is needed. Our project, which started in April 2002, aims to catalyze a Barrier Improvement Cycle (iterative learning and application) and thus enable Remediation System Performance Management (doing the right maintenance neither too early nor too late). The knowledge gained and the capabilities built will help verify the adequacy of past remedial decisions, improve barrier management, and enable improved solutions for future decisions. We believe it will be possible to develop simpler, longer-lived, less expensive caps that are easier to monitor, manage, and repair. The project is planned to: (a) improve the knowledge of degradation mechanisms in times shorter than service life; (b) improve modeling of barrier degradation dynamics; (c) develop sensor systems to identify early degradation; and (d) provide a better basis for developing and testing of new barrier systems. This project combines selected exploratory studies (benchtop and field scale), coupled effects accelerated

Systems biology perspectives on minimal and simpler cells.

Science.gov (United States)

Xavier, Joana C; Patil, Kiran Raosaheb; Rocha, Isabel

2014-09-01

The concept of the minimal cell has fascinated scientists for a long time, from both fundamental and applied points of view. This broad concept encompasses extreme reductions of genomes, the last universal common ancestor (LUCA), the creation of semiartificial cells, and the design of protocells and chassis cells. Here we review these different areas of research and identify common and complementary aspects of each one. We focus on systems biology, a discipline that is greatly facilitating the classical top-down and bottom-up approaches toward minimal cells. In addition, we also review the so-called middle-out approach and its contributions to the field with mathematical and computational models. Owing to the advances in genomics technologies, much of the work in this area has been centered on minimal genomes, or rather minimal gene sets, required to sustain life. Nevertheless, a fundamental expansion has been taking place in the last few years wherein the minimal gene set is viewed as a backbone of a more complex system. Complementing genomics, progress is being made in understanding the system-wide properties at the levels of the transcriptome, proteome, and metabolome. Network modeling approaches are enabling the integration of these different omics data sets toward an understanding of the complex molecular pathways connecting genotype to phenotype. We review key concepts central to the mapping and modeling of this complexity, which is at the heart of research on minimal cells. Finally, we discuss the distinction between minimizing the number of cellular components and minimizing cellular complexity, toward an improved understanding and utilization of minimal and simpler cells. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Systems Biology Perspectives on Minimal and Simpler Cells

Science.gov (United States)

Xavier, Joana C.; Patil, Kiran Raosaheb

2014-01-01

SUMMARY The concept of the minimal cell has fascinated scientists for a long time, from both fundamental and applied points of view. This broad concept encompasses extreme reductions of genomes, the last universal common ancestor (LUCA), the creation of semiartificial cells, and the design of protocells and chassis cells. Here we review these different areas of research and identify common and complementary aspects of each one. We focus on systems biology, a discipline that is greatly facilitating the classical top-down and bottom-up approaches toward minimal cells. In addition, we also review the so-called middle-out approach and its contributions to the field with mathematical and computational models. Owing to the advances in genomics technologies, much of the work in this area has been centered on minimal genomes, or rather minimal gene sets, required to sustain life. Nevertheless, a fundamental expansion has been taking place in the last few years wherein the minimal gene set is viewed as a backbone of a more complex system. Complementing genomics, progress is being made in understanding the system-wide properties at the levels of the transcriptome, proteome, and metabolome. Network modeling approaches are enabling the integration of these different omics data sets toward an understanding of the complex molecular pathways connecting genotype to phenotype. We review key concepts central to the mapping and modeling of this complexity, which is at the heart of research on minimal cells. Finally, we discuss the distinction between minimizing the number of cellular components and minimizing cellular complexity, toward an improved understanding and utilization of minimal and simpler cells. PMID:25184563

Life Cycle Assessment for ecodesign of ecological roof made with Intemper TF Ecological Water-Tank System

Directory of Open Access Journals (Sweden)

Rivela, B.

2013-03-01

Full Text Available The construction industry is one of the less sustainable activities on the planet: with a consumption of 40% of the materials entering the global economy and the generation of 40–50% of the global output of greenhouse gases. The biggest environmental impact caused by buildings is generated during their use phase due to the energy consumption for thermal conditioning. Addition of green elements to buildings is used to improve energy efficiency of buildings. In this study Life Cycle Assessment (LCA methodology has been applied to quantify the environmental impact of the green roofs materials to analyze its environmental profile. The identification of hot spots of the system permits an ecodesign strategy that effectively reduces environmental burdens associated with roof construction, optimizing the environmental performance. The results identify the high environmental impact associated to the structure, the important contribution of the felt wick irrigation system and the extruded polystyrene thermal insulation.

El sector de la construcción representa una de las actividades menos sostenibles del planeta: consume el 40% de los materiales de la economía global y genera el 40-50% de las emisiones de gases de efecto invernadero. El mayor impacto ambiental de los edificios se genera durante su fase de uso, debido al gasto energético de su acondicionamiento térmico. El uso de elementos vegetales es una de las estrategias empleadas para aumentar la eficiencia energética. En este trabajo se ha empleado la metodología de Análisis de Ciclo de Vida (ACV para cuantificar el impacto ambiental de los materiales de la cubierta vegetal. Se han identificado los puntos críticos del sistema para establecer una estrategia de ecodiseño y reducir eficazmente las cargas ambientales. Los resultados obtenidos muestran la importancia del impacto ambiental del soporte estructural, la elevada contribución de la mecha de riego de fieltro y del aislamiento

Paper and Cardboard Packaging Ecodesing and Innovative Life Cycle Solutions

OpenAIRE

Koklacova, Sabine; Atstaja, Dzintra

2012-01-01

This paper discusses the findings of the research project, which explored paper and cardboard packaging ecodesign and innovative life cycle solutions in Latvia. The present article focuses on theoretical background of ecodesign that is aligned to packaging in order to create universal model and guidelines for its implementation in Latvia. The mixed research method has been used in this paper - interviews, document analysis, modelling and surveys. Ecodesign of paper and cardboard packaging in ...

RFM-based eco-efficiency analysis using Takagi-Sugeno fuzzy and AHP approach

International Nuclear Information System (INIS)

Chen Ruiyang

2009-01-01

Eco-design is crucial to take environmental aspects into account in the phases of design. Few literature review that green product must meet market value. The development of models to predict market value is thus very useful because it can provide early eco-efficiency to the eco-design. For the eco-design engineer, when he tries to solve a customer feedback problem, he usually faces the eco-efficiency. There are, however, often other types of fuzziness uncertainty present, which are related to the quantity of eco-design conditions. In this paper, it is derived that analysis of eco-efficiency can be identified by using the RFM value for quantifying eco-design with Takagi-Sugeno fuzzy system on customer feedback problem. It clusters eco-efficiency into segments according to green product usages value expressed in terms of weighted RFM. This experiment examined the weighted RFM effect of overall average normalized, AHP and non-weighted for F1 metric. The experimental results show that the proposed methodology indeed can yield identification of higher quality

Sustainable and safe design of footwear integrating ecological footprint and risk criteria

International Nuclear Information System (INIS)

Herva, Marta; Alvarez, Antonio; Roca, Enrique

2011-01-01

Highlights: → The ecological footprint (EF) is a suitable screening indicator to assist the assessment of the sustainability of an ecodesign proposal. → The EF does not consider the risk derived from hazardous substances in its evaluation. → Environmental risk assessment (ERA) successfully complemented the evaluation of the EF providing safety criteria. → Options that exceeded the safety limits for Hazard Quotient and Cancer Risk where discarded, thus guaranteeing the protection of children. → Trade-offs among criteria could be established by the application of fuzzy logic techniques to derive an ecodesign index. - Abstract: The ecodesign of a product implies that different potential environmental impacts of diverse nature must be taken into account considering its whole life cycle, apart from the general design criteria (i.e. technical, functional, ergonomic, aesthetic or economic). In this sense, a sustainability assessment methodology, ecological footprint (EF), and environmental risk assessment (ERA), were combined for the first time to derive complementary criteria for the ecodesign of footwear. Four models of children's shoes were analyzed and compared. The synthetic shoes obtained a smaller EF (6.5 gm 2 ) when compared to the leather shoes (11.1 gm 2 ). However, high concentrations of hazardous substances were detected in the former, even making the Hazard Quotient (HQ) and the Cancer Risk (CR) exceed the recommended safety limits for one of the synthetic models analyzed. Risk criteria were prioritized in this case and, consequently, the design proposal was discarded. For the other cases, the perspective provided by the indicators of different nature was balanced to accomplish a fairest evaluation. The selection of fibers produced under sustainable criteria and the reduction of the materials consumption was recommended, since the area requirements would be minimized and the absence of hazardous compounds would ensure safety conditions during the

Sustainable and safe design of footwear integrating ecological footprint and risk criteria

Energy Technology Data Exchange (ETDEWEB)

Herva, Marta [Sustainable Processes and Products Engineering Group, Department of Chemical Engineering, University of Santiago de Compostela, Campus Vida, 15705 Santiago de Compostela (Spain); Alvarez, Antonio [Industrias de Diseno Textil, S.A., Edificio Inditex, Av. de la Diputacion s/n, Poligono de Sabon, 15142 Arteixo - A Coruna (Spain); Roca, Enrique, E-mail: enrique.roca@usc.es [Sustainable Processes and Products Engineering Group, Department of Chemical Engineering, University of Santiago de Compostela, Campus Vida, 15705 Santiago de Compostela (Spain)

2011-09-15

Highlights: {yields} The ecological footprint (EF) is a suitable screening indicator to assist the assessment of the sustainability of an ecodesign proposal. {yields} The EF does not consider the risk derived from hazardous substances in its evaluation. {yields} Environmental risk assessment (ERA) successfully complemented the evaluation of the EF providing safety criteria. {yields} Options that exceeded the safety limits for Hazard Quotient and Cancer Risk where discarded, thus guaranteeing the protection of children. {yields} Trade-offs among criteria could be established by the application of fuzzy logic techniques to derive an ecodesign index. - Abstract: The ecodesign of a product implies that different potential environmental impacts of diverse nature must be taken into account considering its whole life cycle, apart from the general design criteria (i.e. technical, functional, ergonomic, aesthetic or economic). In this sense, a sustainability assessment methodology, ecological footprint (EF), and environmental risk assessment (ERA), were combined for the first time to derive complementary criteria for the ecodesign of footwear. Four models of children's shoes were analyzed and compared. The synthetic shoes obtained a smaller EF (6.5 gm{sup 2}) when compared to the leather shoes (11.1 gm{sup 2}). However, high concentrations of hazardous substances were detected in the former, even making the Hazard Quotient (HQ) and the Cancer Risk (CR) exceed the recommended safety limits for one of the synthetic models analyzed. Risk criteria were prioritized in this case and, consequently, the design proposal was discarded. For the other cases, the perspective provided by the indicators of different nature was balanced to accomplish a fairest evaluation. The selection of fibers produced under sustainable criteria and the reduction of the materials consumption was recommended, since the area requirements would be minimized and the absence of hazardous compounds would

BED estimates of HIV incidence: resolving the differences, making things simpler.

Directory of Open Access Journals (Sweden)

John Hargrove

Full Text Available Develop a simple method for optimal estimation of HIV incidence using the BED capture enzyme immunoassay.Use existing BED data to estimate mean recency duration, false recency rates and HIV incidence with reference to a fixed time period, T.Compare BED and cohort estimates of incidence referring to identical time frames. Generalize this approach to suggest a method for estimating HIV incidence from any cross-sectional survey.Follow-up and BED analyses of the same, initially HIV negative, cases followed over the same set time period T, produce estimates of the same HIV incidence, permitting the estimation of the BED mean recency period for cases who have been HIV positive for less than T. Follow-up of HIV positive cases over T, similarly, provides estimates of the false-recent rate appropriate for T. Knowledge of these two parameters for a given population allows the estimation of HIV incidence during T by applying the BED method to samples from cross-sectional surveys. An algorithm is derived for providing these estimates, adjusted for the false-recent rate. The resulting estimator is identical to one derived independently using a more formal mathematical analysis. Adjustments improve the accuracy of HIV incidence estimates. Negative incidence estimates result from the use of inappropriate estimates of the false-recent rate and/or from sampling error, not from any error in the adjustment procedure.Referring all estimates of mean recency periods, false-recent rates and incidence estimates to a fixed period T simplifies estimation procedures and allows the development of a consistent method for producing adjusted estimates of HIV incidence of improved accuracy. Unadjusted BED estimates of incidence, based on life-time recency periods, would be both extremely difficult to produce and of doubtful value.

External GSM phone calls now made simpler

CERN Multimedia

2007-01-01

On 2 July, the IT/CS Telecom Service introduced a new service making external calls from CERN GSM phones easier. A specific prefix is no longer needed for calls outside CERN. External calls from CERN GSM phones are to be simplified. It is no longer necessary to use a special prefix to call an external number from the CERN GSM network.The Telecom Section of the IT/CS Group is introducing a new system that will make life easier for GSM users. It is no longer necessary to use a special prefix (333) to call an external number from the CERN GSM network. Simply dial the number directly like any other Swiss GSM customer. CERN currently has its own private GSM network with the Swiss mobile operator, Sunrise, covering the whole of Switzerland. This network was initially intended exclusively for calls between CERN numbers (replacing the old beeper system). A special system was later introduced for external calls, allowing them to pass thr...

Rational Decision-Making in Inhibitory Control

Science.gov (United States)

Shenoy, Pradeep; Yu, Angela J.

2011-01-01

An important aspect of cognitive flexibility is inhibitory control, the ability to dynamically modify or cancel planned actions in response to changes in the sensory environment or task demands. We formulate a probabilistic, rational decision-making framework for inhibitory control in the stop signal paradigm. Our model posits that subjects maintain a Bayes-optimal, continually updated representation of sensory inputs, and repeatedly assess the relative value of stopping and going on a fine temporal scale, in order to make an optimal decision on when and whether to go on each trial. We further posit that they implement this continual evaluation with respect to a global objective function capturing the various reward and penalties associated with different behavioral outcomes, such as speed and accuracy, or the relative costs of stop errors and go errors. We demonstrate that our rational decision-making model naturally gives rise to basic behavioral characteristics consistently observed for this paradigm, as well as more subtle effects due to contextual factors such as reward contingencies or motivational factors. Furthermore, we show that the classical race model can be seen as a computationally simpler, perhaps neurally plausible, approximation to optimal decision-making. This conceptual link allows us to predict how the parameters of the race model, such as the stopping latency, should change with task parameters and individual experiences/ability. PMID:21647306

Rational decision-making in inhibitory control.

Science.gov (United States)

Shenoy, Pradeep; Yu, Angela J

2011-01-01

An important aspect of cognitive flexibility is inhibitory control, the ability to dynamically modify or cancel planned actions in response to changes in the sensory environment or task demands. We formulate a probabilistic, rational decision-making framework for inhibitory control in the stop signal paradigm. Our model posits that subjects maintain a Bayes-optimal, continually updated representation of sensory inputs, and repeatedly assess the relative value of stopping and going on a fine temporal scale, in order to make an optimal decision on when and whether to go on each trial. We further posit that they implement this continual evaluation with respect to a global objective function capturing the various reward and penalties associated with different behavioral outcomes, such as speed and accuracy, or the relative costs of stop errors and go errors. We demonstrate that our rational decision-making model naturally gives rise to basic behavioral characteristics consistently observed for this paradigm, as well as more subtle effects due to contextual factors such as reward contingencies or motivational factors. Furthermore, we show that the classical race model can be seen as a computationally simpler, perhaps neurally plausible, approximation to optimal decision-making. This conceptual link allows us to predict how the parameters of the race model, such as the stopping latency, should change with task parameters and individual experiences/ability.

ECO DESIGN IN DESIGN PROCESS

Directory of Open Access Journals (Sweden)

PRALEA Jeni

2014-05-01

Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

The ''Kinetic Stabilizer'': A Simpler Tandem Mirror Confinement?

International Nuclear Information System (INIS)

Post, R.F.

2000-01-01

ion beams are injected along the field lines in such a way as to be reflected before they reach the mirrors, thus forming a localized peak in the plasma density. It will be shown that the power required to produce these stabilizing plasmas is much less than the power per meter of fusion power systems that might employ this technique. Use of the Kinetic Stabilizer idea may therefore permit the construction of tandem mirror fusion power systems that are much smaller and simpler than those based on the use of non-axisymmetric fields to achieve MHD stability

Concordance between a simpler definition of major depressive disorder and Diagnostic and statistical manual of mental disorders, fourth edition: an independent replication in an outpatient sample.

Science.gov (United States)

Zimmerman, Mark; Emmert-Aronson, Benjamin O; Brown, Timothy A

2011-01-01

The diagnostic and statistical manual of mental disorders, fourth edition (DSM-IV) symptom criteria for major depressive disorder (MDD) are somewhat lengthy with several studies showing that clinicians have difficulty recalling all 9 symptoms. Moreover, the criteria include somatic symptoms that are difficult to apply in patients with medical illnesses. To address these problems, a simpler definition of MDD was developed that did not include the somatic symptoms. Previous reports found high levels of agreement between the simplified and full DSM-IV definition of MDD. However, the same research group has conducted all previous studies of psychiatric patients. The goal of the present study was to determine if a high level of concordance between the 2 definitions would be replicated in an independent setting. We interviewed 2907 psychiatric outpatients presenting for treatment at the Boston University Center for Anxiety and Related Disorders. A trained diagnostic rater administered a semistructured interview and inquired about all symptoms of depression for all patients. A high level of agreement was found between the DSM-IV and the simpler definition of MDD. The absolute level of agreement between the 2 definitions was 95.5% and the κ coefficient was 0.88. Thus, consistent with previous studies, a high level of concordance was found between a simpler definition of MDD and the DSM-IV definition. This new definition offers 2 advantages over the current DSM-IV definition-it is briefer, and it is easier to apply with medically ill patients because it is free of somatic symptoms. Implications of these findings for DSM-5 are discussed. Copyright © 2011 Elsevier Inc. All rights reserved.

External validation of approaches to prediction of falls during hospital rehabilitation stays and development of a new simpler tool

Directory of Open Access Journals (Sweden)

Angela Vratsistas-Curto

2017-12-01

Full Text Available Objectives: To test the external validity of 4 approaches to fall prediction in a rehabilitation setting (Predict_FIRST, Ontario Modified STRATIFY (OMS, physiotherapists’ judgement of fall risk (PT_Risk, and falls in the past year (Past_Falls, and to develop and test the validity of a simpler tool for fall prediction in rehabilitation (Predict_CM2. Participants: A total of 300 consecutively-admitted rehabilitation inpatients. Methods: Prospective inception cohort study. Falls during the rehabilitation stay were monitored. Potential predictors were extracted from medical records. Results: Forty-one patients (14% fell during their rehabilitation stay. The external validity, area under the receiver operating characteristic curve (AUC, for predicting future fallers was: 0.71 (95% confidence interval (95% CI: 0.61–0.81 for OMS (Total_Score; 0.66 (95% CI: 0.57–0.74 for Predict_FIRST; 0.65 (95% CI 0.57–0.73 for PT_Risk; and 0.52 for Past_Falls (95% CI: 0.46–0.60. A simple 3-item tool (Predict_CM2 was developed from the most predictive individual items (impaired mobility/transfer ability, impaired cognition, and male sex. The accuracy of Predict_CM2 was 0.73 (95% CI: 0.66–0.81, comparable to OMS (Total_Score (p = 0.52, significantly better than Predict_FIRST (p = 0.04, and Past_Falls (p < 0.001, and approaching significantly better than PT_Risk (p = 0.09. Conclusion: Predict_CM2 is a simpler screening tool with similar accuracy for predicting fallers in rehabilitation to OMS (Total_Score and better accuracy than Predict_FIRST or Past_Falls. External validation of Predict_CM2 is required.

Quantum-Like Bayesian Networks for Modeling Decision Making

Directory of Open Access Journals (Sweden)

Catarina eMoreira

2016-01-01

Full Text Available In this work, we explore an alternative quantum structure to perform quantum probabilistic inferences to accommodate the paradoxical findings of the Sure Thing Principle. We propose a Quantum-Like Bayesian Network, which consists in replacing classical probabilities by quantum probability amplitudes. However, since this approach suffers from the problem of exponential growth of quantum parameters, we also propose a similarity heuristic that automatically fits quantum parameters through vector similarities. This makes the proposed model general and predictive in contrast to the current state of the art models, which cannot be generalized for more complex decision scenarios and that only provide an explanatory nature for the observed paradoxes. In the end, the model that we propose consists in a nonparametric method for estimating inference effects from a statistical point of view. It is a statistical model that is simpler than the previous quantum dynamic and quantum-like models proposed in the literature. We tested the proposed network with several empirical data from the literature, mainly from the Prisoner's Dilemma game and the Two Stage Gambling game. The results obtained show that the proposed quantum Bayesian Network is a general method that can accommodate violations of the laws of classical probability theory and make accurate predictions regarding human decision-making in these scenarios.

Decision-making without a brain: how an amoeboid organism solves the two-armed bandit.

Science.gov (United States)

Reid, Chris R; MacDonald, Hannelore; Mann, Richard P; Marshall, James A R; Latty, Tanya; Garnier, Simon

2016-06-01

Several recent studies hint at shared patterns in decision-making between taxonomically distant organisms, yet few studies demonstrate and dissect mechanisms of decision-making in simpler organisms. We examine decision-making in the unicellular slime mould Physarum polycephalum using a classical decision problem adapted from human and animal decision-making studies: the two-armed bandit problem. This problem has previously only been used to study organisms with brains, yet here we demonstrate that a brainless unicellular organism compares the relative qualities of multiple options, integrates over repeated samplings to perform well in random environments, and combines information on reward frequency and magnitude in order to make correct and adaptive decisions. We extend our inquiry by using Bayesian model selection to determine the most likely algorithm used by the cell when making decisions. We deduce that this algorithm centres around a tendency to exploit environments in proportion to their reward experienced through past sampling. The algorithm is intermediate in computational complexity between simple, reactionary heuristics and calculation-intensive optimal performance algorithms, yet it has very good relative performance. Our study provides insight into ancestral mechanisms of decision-making and suggests that fundamental principles of decision-making, information processing and even cognition are shared among diverse biological systems. © 2016 The Authors.

Bayesian probability estimates are not necessary to make choices satisfying Bayes’ rule in elementary situations

Science.gov (United States)

Domurat, Artur; Kowalczuk, Olga; Idzikowska, Katarzyna; Borzymowska, Zuzanna; Nowak-Przygodzka, Marta

2015-01-01

This paper has two aims. First, we investigate how often people make choices conforming to Bayes’ rule when natural sampling is applied. Second, we show that using Bayes’ rule is not necessary to make choices satisfying Bayes’ rule. Simpler methods, even fallacious heuristics, might prescribe correct choices reasonably often under specific circumstances. We considered elementary situations with binary sets of hypotheses and data. We adopted an ecological approach and prepared two-stage computer tasks resembling natural sampling. Probabilistic relations were inferred from a set of pictures, followed by a choice which was made to maximize the chance of a preferred outcome. Use of Bayes’ rule was deduced indirectly from choices. Study 1 used a stratified sample of N = 60 participants equally distributed with regard to gender and type of education (humanities vs. pure sciences). Choices satisfying Bayes’ rule were dominant. To investigate ways of making choices more directly, we replicated Study 1, adding a task with a verbal report. In Study 2 (N = 76) choices conforming to Bayes’ rule dominated again. However, the verbal reports revealed use of a new, non-inverse rule, which always renders correct choices, but is easier than Bayes’ rule to apply. It does not require inversion of conditions [transforming P(H) and P(D|H) into P(H|D)] when computing chances. Study 3 examined the efficiency of three fallacious heuristics (pre-Bayesian, representativeness, and evidence-only) in producing choices concordant with Bayes’ rule. Computer-simulated scenarios revealed that the heuristics produced correct choices reasonably often under specific base rates and likelihood ratios. Summing up we conclude that natural sampling results in most choices conforming to Bayes’ rule. However, people tend to replace Bayes’ rule with simpler methods, and even use of fallacious heuristics may be satisfactorily efficient. PMID:26347676

Bayesian probability estimates are not necessary to make choices satisfying Bayes’ rule in elementary situations

Directory of Open Access Journals (Sweden)

Artur eDomurat

2015-08-01

Full Text Available This paper has two aims. First, we investigate how often people make choices conforming to Bayes’ rule when natural sampling is applied. Second, we show that using Bayes’ rule is not necessary to make choices satisfying Bayes’ rule. Simpler methods, even fallacious heuristics, might prescribe correct choices reasonably often under specific circumstances. We considered elementary situations with binary sets of hypotheses and data. We adopted an ecological approach and prepared two-stage computer tasks resembling natural sampling. Probabilistic relations were to be inferred from a set of pictures, followed by a choice between the data which was made to maximize a chance for a preferred outcome. Using Bayes’ rule was deduced indirectly from choices.Study 1 (N=60 followed a 2 (gender: female vs. male x 2 (education: humanities vs. pure sciences between-subjects factorial design with balanced cells, and a number of correct choices as a dependent variable. Choices satisfying Bayes’ rule were dominant. To investigate ways of making choices more directly, we replicated Study 1, adding a task with a verbal report. In Study 2 (N=76 choices conforming to Bayes’ rule dominated again. However, the verbal reports revealed use of a new, non-inverse rule, which always renders correct choices, but is easier than Bayes’ rule to apply. It does not require inversing conditions (transforming P(H and P(D|H into P(H|D when computing chances. Study 3 examined efficiency of the three fallacious heuristics (pre-Bayesian, representativeness, and evidence-only in producing choices concordant with Bayes’ rule. Computer-simulated scenarios revealed that the heuristics produce correct choices reasonably often under specific base rates and likelihood ratios. Summing up we conclude that natural sampling leads to most choices conforming to Bayes’ rule. However, people tend to replace Bayes’ rule with simpler methods, and even use of fallacious heuristics may

A simple threshold rule is sufficient to explain sophisticated collective decision-making.

Directory of Open Access Journals (Sweden)

Elva J H Robinson

Full Text Available Decision-making animals can use slow-but-accurate strategies, such as making multiple comparisons, or opt for simpler, faster strategies to find a 'good enough' option. Social animals make collective decisions about many group behaviours including foraging and migration. The key to the collective choice lies with individual behaviour. We present a case study of a collective decision-making process (house-hunting ants, Temnothorax albipennis, in which a previously proposed decision strategy involved both quality-dependent hesitancy and direct comparisons of nests by scouts. An alternative possible decision strategy is that scouting ants use a very simple quality-dependent threshold rule to decide whether to recruit nest-mates to a new site or search for alternatives. We use analytical and simulation modelling to demonstrate that this simple rule is sufficient to explain empirical patterns from three studies of collective decision-making in ants, and can account parsimoniously for apparent comparison by individuals and apparent hesitancy (recruitment latency effects, when available nests differ strongly in quality. This highlights the need to carefully design experiments to detect individual comparison. We present empirical data strongly suggesting that best-of-n comparison is not used by individual ants, although individual sequential comparisons are not ruled out. However, by using a simple threshold rule, decision-making groups are able to effectively compare options, without relying on any form of direct comparison of alternatives by individuals. This parsimonious mechanism could promote collective rationality in group decision-making.

A simple threshold rule is sufficient to explain sophisticated collective decision-making.

Science.gov (United States)

Robinson, Elva J H; Franks, Nigel R; Ellis, Samuel; Okuda, Saki; Marshall, James A R

2011-01-01

Decision-making animals can use slow-but-accurate strategies, such as making multiple comparisons, or opt for simpler, faster strategies to find a 'good enough' option. Social animals make collective decisions about many group behaviours including foraging and migration. The key to the collective choice lies with individual behaviour. We present a case study of a collective decision-making process (house-hunting ants, Temnothorax albipennis), in which a previously proposed decision strategy involved both quality-dependent hesitancy and direct comparisons of nests by scouts. An alternative possible decision strategy is that scouting ants use a very simple quality-dependent threshold rule to decide whether to recruit nest-mates to a new site or search for alternatives. We use analytical and simulation modelling to demonstrate that this simple rule is sufficient to explain empirical patterns from three studies of collective decision-making in ants, and can account parsimoniously for apparent comparison by individuals and apparent hesitancy (recruitment latency) effects, when available nests differ strongly in quality. This highlights the need to carefully design experiments to detect individual comparison. We present empirical data strongly suggesting that best-of-n comparison is not used by individual ants, although individual sequential comparisons are not ruled out. However, by using a simple threshold rule, decision-making groups are able to effectively compare options, without relying on any form of direct comparison of alternatives by individuals. This parsimonious mechanism could promote collective rationality in group decision-making.

Development of urban solar infrastructure to support low-carbon mobility

International Nuclear Information System (INIS)

Mendoza, Joan-Manuel F.; Sanyé-Mengual, Esther; Angrill, Sara; García-Lozano, Raúl; Feijoo, Gumersindo; Josa, Alejandro

2015-01-01

The provision of an adequate network of urban infrastructures is essential to create clean and energy-efficient urban mobility systems. However, the urban infrastructure to support sustainable mobility can produce a substantial environmental burden if no life cycle environmental criteria are applied in its design and management. This paper demonstrates the potential to support energy-efficient and CO 2 -free pedestrian and electric bike (e-bike) mobility through the ecological design (eco-design) of urban elements. An eco-design approach is applied to reconceptualize a conventional pergola toward an eco-product (solar pergola). The solar pergola generates surplus photovoltaic electricity that provides a multifunctional character. According to the end-use of this energy, different scenarios are analyzed for robust decision-making. The deployment of solar pergolas can contribute to save from 2,080 kg to over 47,185 kg of CO 2 eq. and from 350,390 MJ to over 692,760 MJ eq. in 10 years, depending on the geographic emplacement (solar radiation and electricity grid system). These savings are equivalent to charging 2–9 e-bikes per day using clean energy. Instead of maximizing infrastructure deployment to shift to environmentally friendly modes of mobility, the implementation of multifunctional urban elements represents a key area of action in the context of smart city development. -- Highlights: •Infrastructure eco-design is key to mitigate environmental impacts of urban mobility. •Solar pergolas can support pedestrian and e-bike mobility with no environmental cost. •Over 47 tons of CO 2 and 692 GJ can be avoided in 10 years per implemented pergola. •Each pergola can support daily charging of 2–9 e-bikes by supplying clean energy. •Multifunctional infrastructure is key to support sustainable multimodal mobility

Enantioselective Total Synthesis of Antibiotic CJ-16,264, Synthesis and Biological Evaluation of Designed Analogues, and Discovery of Highly Potent and Simpler Antibacterial Agents.

Science.gov (United States)

Nicolaou, K C; Pulukuri, Kiran Kumar; Rigol, Stephan; Buchman, Marek; Shah, Akshay A; Cen, Nicholas; McCurry, Megan D; Beabout, Kathryn; Shamoo, Yousif

2017-11-08

An improved and enantioselective total synthesis of antibiotic CJ-16,264 through a practical kinetic resolution and an iodolactonization reaction to form the iodo pyrrolizidinone fragment of the molecule is described. A series of racemic and enantiopure analogues of CJ-16,264 was designed and synthesized through the developed synthetic technologies and tested against drug-resistant bacterial strains. These studies led to interesting structure-activity relationships and the identification of a number of simpler, and yet equipotent, or even more potent, antibacterial agents than the natural product, thereby setting the foundation for further investigations in the quest for new anti-infective drugs.

Hybrid illumination systems for a brigth future

DEFF Research Database (Denmark)

Bjarklev, Araceli

Problem to be adressed: Even with the implementation of the Eco-design directive (2005/32/EC) it is projected that the 20% energy reduction goal will not be reached in 2020. as a matter of fact, the electricity consumption in the illumination sector will not be changed from the levels of cosnsump...... of an interdisciplinary group, we aim to make a prototype of a test system. for this we will merge Solid State and Fiber optic technologies. The overall project will be assessed under  the viewpoints of environmental, socio-economic and esthetical parameters...

Strategic implementation of design for environment at Embraer

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; Grandi, Carlos M.; Rozenfeld, Henrique

2013-01-01

Design for Environment (or ecodesign) has become increasingly important in the aircraft industry. Embraer, one of the world’s leading aircraft manufacturers, is committed to improve the environmental performance of the developed aircrafts. The roadmap for the strategic implementation of Df......E at Embraer, developed based on the application of the Ecodesign Maturity Model (EcoM2), is presented and further discussed in this paper. The paper describes the main projects and activities carried out at the company so to develop robust processes for the development of products with a better environmental...

Sustainable and safe design of footwear integrating ecological footprint and risk criteria.

Science.gov (United States)

Herva, Marta; Álvarez, Antonio; Roca, Enrique

2011-09-15

The ecodesign of a product implies that different potential environmental impacts of diverse nature must be taken into account considering its whole life cycle, apart from the general design criteria (i.e. technical, functional, ergonomic, aesthetic or economic). In this sense, a sustainability assessment methodology, ecological footprint (EF), and environmental risk assessment (ERA), were combined for the first time to derive complementary criteria for the ecodesign of footwear. Four models of children's shoes were analyzed and compared. The synthetic shoes obtained a smaller EF (6.5 gm(2)) when compared to the leather shoes (11.1 gm(2)). However, high concentrations of hazardous substances were detected in the former, even making the Hazard Quotient (HQ) and the Cancer Risk (CR) exceed the recommended safety limits for one of the synthetic models analyzed. Risk criteria were prioritized in this case and, consequently, the design proposal was discarded. For the other cases, the perspective provided by the indicators of different nature was balanced to accomplish a fairest evaluation. The selection of fibers produced under sustainable criteria and the reduction of the materials consumption was recommended, since the area requirements would be minimized and the absence of hazardous compounds would ensure safety conditions during the use stage. Copyright © 2011 Elsevier B.V. All rights reserved.

Comparison of GERG-2008 and simpler EoS models in calculation of phase equilibrium and physical properties of natural gas related systems

DEFF Research Database (Denmark)

Varzandeh, Farhad; Stenby, Erling Halfdan; Yan, Wei

2017-01-01

Accurate description of thermodynamic properties of natural gas systems is of great significance in the oil and gas industry. For this application, non-cubic equations of state (EoSs) are advantageous due to their better density and compressibility description. Among the non-cubic models, GERG-2008...... is a new wide-range EoS for natural gases and other mixtures of 21 natural gas components. It is considered as a standard reference equation suitable for natural gas applications where highly accurate thermodynamic properties are required. Soave's modification of Benedict-Webb-Rubin (Soave-BWR) Eo......S is another model that despite its empirical nature, provides accurate density description even around the critical point. It is much simpler than GERG-2008 and easier to handle and generalize to reservoir oil fluids. This study presents a comprehensive comparison between GERG-2008 and other cubic (SRK and PR...

Cradle to Cradle and LCA – is there a conflict?

DEFF Research Database (Denmark)

Bjørn, Anders; Hauschild, Michael Zwicky

2011-01-01

The Cradle to Cradle (C2C) approach to ecodesign has been gaining increasing interest among industries, authorities and consumers over the last years. With its focus on resource conservation through closing loops, use of solar-based energy sources, avoidance of certain chemicals and the stated aim...... to create good rather than just avoid doing too much evil, it appeals more to industry than traditional LCA-based ecodesign. What are the real differences between the two approaches, and is there a conflict? Potential points of divergence between C2C and LCA are identified and the ability of C2C to support...

Streamlined Total Synthesis of Trioxacarcins and Its Application to the Design, Synthesis, and Biological Evaluation of Analogues Thereof. Discovery of Simpler Designed and Potent Trioxacarcin Analogues.

Science.gov (United States)

Nicolaou, K C; Chen, Pengxi; Zhu, Shugao; Cai, Quan; Erande, Rohan D; Li, Ruofan; Sun, Hongbao; Pulukuri, Kiran Kumar; Rigol, Stephan; Aujay, Monette; Sandoval, Joseph; Gavrilyuk, Julia

2017-11-01

A streamlined total synthesis of the naturally occurring antitumor agents trioxacarcins is described, along with its application to the construction of a series of designed analogues of these complex natural products. Biological evaluation of the synthesized compounds revealed a number of highly potent, and yet structurally simpler, compounds that are effective against certain cancer cell lines, including a drug-resistant line. A novel one-step synthesis of anthraquinones and chloro anthraquinones from simple ketone precursors and phenylselenyl chloride is also described. The reported work, featuring novel chemistry and cascade reactions, has potential applications in cancer therapy, including targeted approaches as in antibody-drug conjugates.

Quantum dynamics on potential energy surfaces. Simpler states and simpler dynamics

Energy Technology Data Exchange (ETDEWEB)

Keller, Johannes Friedrich

2015-09-25

In this dissertation we analyze and simplify wave functions and observables in the context of quantum molecular dynamics. The two main topics we discuss are the structure of Hagedorn wave packets in position and phase space, and semiclassical approximations for the propagation of quantum expectations with nonnegative phase space densities. We provide algorithmic discretizations for these approximations and illustrate their validity and applicability by means of numerical experiments.

Ecodesign requirements for televisions

DEFF Research Database (Denmark)

Huulgaard, Rikke Dorothea; Dalgaard, Randi; Merciai, Stefano

2013-01-01

impact, which is in contradiction with the focus area of the IM. The result of the sensitivity analysis is that the source of electricity is a potentially significant contributor of uncertainty. However, even in a coal-based scenario, the contribution from the production phase is approximately 30...

Why we should use simpler models if the data allow this: relevance for ANOVA designs in experimental biology

Directory of Open Access Journals (Sweden)

Lazic Stanley E

2008-07-01

Full Text Available Abstract Background Analysis of variance (ANOVA is a common statistical technique in physiological research, and often one or more of the independent/predictor variables such as dose, time, or age, can be treated as a continuous, rather than a categorical variable during analysis – even if subjects were randomly assigned to treatment groups. While this is not common, there are a number of advantages of such an approach, including greater statistical power due to increased precision, a simpler and more informative interpretation of the results, greater parsimony, and transformation of the predictor variable is possible. Results An example is given from an experiment where rats were randomly assigned to receive either 0, 60, 180, or 240 mg/L of fluoxetine in their drinking water, with performance on the forced swim test as the outcome measure. Dose was treated as either a categorical or continuous variable during analysis, with the latter analysis leading to a more powerful test (p = 0.021 vs. p = 0.159. This will be true in general, and the reasons for this are discussed. Conclusion There are many advantages to treating variables as continuous numeric variables if the data allow this, and this should be employed more often in experimental biology. Failure to use the optimal analysis runs the risk of missing significant effects or relationships.

Can the acceptance of nuclear reactors be raised by a simpler, more transparent safety concept employing improved containments?

International Nuclear Information System (INIS)

Krieg, R.

1993-01-01

Sociological and psychological findings are presented which describe problems society faces with risky technologies. It turns out that for a small but influential group of the society not only the risk, but also the transparency of the technology and the engineered safeguards are important. For this group an improvement of the transparency should raise the acceptance of the technology. However, for the majority of the public, broad discussions about a different more transparent safety concept could generate a feeling of insecurity, especially concerning existing nuclear power plants. In order to improve the transparency in engineered safeguards of nuclear reactors, four basic principles are introduced. Nuclear containments, which remain intact after failure of all emergency cooling systems resulting in a core meltdown accident with steam and hydrogen explosions, are in line with these principles. Such containments are under investigation in Germany right now. It is pointed out that the public should be informed prudently about this work to improve the containments, and the required transparency of the engineered safeguards should be underlined as a major goal. Vague descriptions, providing only superficially information about safer reactors, could easily cause misunderstandings. If one goes along this line a simpler and more transparent safety concept employing improved containments will have the potential to raise the acceptance of nuclear reactors. (orig.)

Design for Sustainability: Current Trends in Sustainable Product Design and Development

Directory of Open Access Journals (Sweden)

Marcel Crul

2009-08-01

Full Text Available The Design for Sustainability (D4S concept outlines methodologies for making sustainable improvements (social, economic and environmental to products by applying elements of life cycle thinking. D4S builds on the work of ecodesign to include economic and social concerns, and its methodology includes both incremental and radical innovation. The United Nations Environment Programme and the Delft University of Technology, the Netherlands, in concert with key partners, work to support, illustrate, and diffuse targeted D4S demonstration efforts, including the European Commission-funded Cleaner Production for Better Products project in Vietnam, that are needed to change unsustainable consumption and production patterns.

Integrating Environmental Decisions into the Product Development Process: Part 1 - The Early Stages

DEFF Research Database (Denmark)

Bhamra, T.; Evans, S.; McAloone, Timothy Charles

1999-01-01

environmental decisions into their product development process which is very unusual in that ecodesign is significantly different for the pre- and post-specification stages of the design process. This paper explains the findings related to the first phase being the very early stages of the product development...... in the UK, Central Europe and the USA are carrying out Ecodesign. The survey also investigated the successes and failures companies had experienced and the lessons they had learnt along the way. From this survey we identified a number of success factors that enabled companies to successfully integrate...... process prior to the specification being finalised. A second paper, considers the findings from the later phases of the product development process....

Simpler and More Accurate: Weighing the Mercury in Electrolytic Cells by Radiotracer Dilution Method

Directory of Open Access Journals (Sweden)

Sugiharto

2010-08-01

mentioned above, it was clear that radiotracer dilution method gives better result in terms of higher accuracy and simpler procedure in measurement of the weight of mercury in electrolytic cells. Above all, this method is very suitable to be implemented in soda industry.

Simpler and More Accurate: Weighing the Mercury in Electrolytic Cells by Radiotracer Dilution Method

International Nuclear Information System (INIS)

Sugiharto; Santoso, S.B.; Santoso, G.B.

2010-01-01

clear that radiotracer dilution method gives better result in terms of higher accuracy and simpler procedure in measurement of the weight of mercury in electrolytic cells. Above all, this method is very suitable to be implemented in soda industry. (author)

Optimal decision making and matching are tied through diminishing returns.

Science.gov (United States)

Kubanek, Jan

2017-08-08

How individuals make decisions has been a matter of long-standing debate among economists and researchers in the life sciences. In economics, subjects are viewed as optimal decision makers who maximize their overall reward income. This framework has been widely influential, but requires a complete knowledge of the reward contingencies associated with a given choice situation. Psychologists and ecologists have observed that individuals tend to use a simpler "matching" strategy, distributing their behavior in proportion to relative rewards associated with their options. This article demonstrates that the two dominant frameworks of choice behavior are linked through the law of diminishing returns. The relatively simple matching can in fact provide maximal reward when the rewards associated with decision makers' options saturate with the invested effort. Such saturating relationships between reward and effort are hallmarks of the law of diminishing returns. Given the prevalence of diminishing returns in nature and social settings, this finding can explain why humans and animals so commonly behave according to the matching law. The article underscores the importance of the law of diminishing returns in choice behavior.

Information search and decision making: effects of age and complexity on strategy use.

Science.gov (United States)

Queen, Tara L; Hess, Thomas M; Ennis, Gilda E; Dowd, Keith; Grühn, Daniel

2012-12-01

The impact of task complexity on information search strategy and decision quality was examined in a sample of 135 young, middle-aged, and older adults. We were particularly interested in the competing roles of fluid cognitive ability and domain knowledge and experience, with the former being a negative influence and the latter being a positive influence on older adults' performance. Participants utilized 2 decision matrices, which varied in complexity, regarding a consumer purchase. Using process tracing software and an algorithm developed to assess decision strategy, we recorded search behavior, strategy selection, and final decision. Contrary to expectations, older adults were not more likely than the younger age groups to engage in information-minimizing search behaviors in response to increases in task complexity. Similarly, adults of all ages used comparable decision strategies and adapted their strategies to the demands of the task. We also examined decision outcomes in relation to participants' preferences. Overall, it seems that older adults utilize simpler sets of information primarily reflecting the most valued attributes in making their choice. The results of this study suggest that older adults are adaptive in their approach to decision making and that this ability may benefit from accrued knowledge and experience. 2013 APA, all rights reserved

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling

International Nuclear Information System (INIS)

Martinho, Graça; Pires, Ana; Saraiva, Luanha; Ribeiro, Rita

2012-01-01

Highlights: ► The article shows WEEE plastics characterization from a recycling unit in Portugal. ► The recycling unit has low machinery, with hand sorting of plastics elements. ► Most common polymers are PS, ABS, PC/ABS, HIPS and PP. ► Most plastics found have no identification of plastic type or flame retardants. ► Ecodesign is still not practiced for EEE, with repercussions in end of life stage. - Abstract: This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile–butadiene–styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production.

Understanding psychiatric disorder by capturing ecologically relevant features of learning and decision-making.

Science.gov (United States)

Scholl, Jacqueline; Klein-Flügge, Miriam

2017-09-28

Recent research in cognitive neuroscience has begun to uncover the processes underlying increasingly complex voluntary behaviours, including learning and decision-making. Partly this success has been possible by progressing from simple experimental tasks to paradigms that incorporate more ecological features. More specifically, the premise is that to understand cognitions and brain functions relevant for real life, we need to introduce some of the ecological challenges that we have evolved to solve. This often entails an increase in task complexity, which can be managed by using computational models to help parse complex behaviours into specific component mechanisms. Here we propose that using computational models with tasks that capture ecologically relevant learning and decision-making processes may provide a critical advantage for capturing the mechanisms underlying symptoms of disorders in psychiatry. As a result, it may help develop mechanistic approaches towards diagnosis and treatment. We begin this review by mapping out the basic concepts and models of learning and decision-making. We then move on to consider specific challenges that emerge in realistic environments and describe how they can be captured by tasks. These include changes of context, uncertainty, reflexive/emotional biases, cost-benefit decision-making, and balancing exploration and exploitation. Where appropriate we highlight future or current links to psychiatry. We particularly draw examples from research on clinical depression, a disorder that greatly compromises motivated behaviours in real-life, but where simpler paradigms have yielded mixed results. Finally, we highlight several paradigms that could be used to help provide new insights into the mechanisms of psychiatric disorders. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

1 Relevance of Green Marketing on Environmental Degradation: An ...

African Journals Online (AJOL)

incorporated into the eco-design product process to minimize eco-harm. Keywords: ... refers to holistic marketing concept wherein the production, marketing, consumption .... That is, products that are manufactured through green technology ...

Chances for the development of manufactures of capital goods. Analysis of the situation and sector evolution; Oportunidades para el desarrollo de los fabricantes de bienes de equipo. Analisis de la situacion y evolucion del sector

Energy Technology Data Exchange (ETDEWEB)

Pelaez Ramos, M. L.

2012-07-01

The main purpose of this paper is to analyze the situation and development in the capital goods sector in Spain. This industry is not just an important sector in the Spanish economy but, given its structural characteristics (dynamism, influence on the production processes of other activities and presence in all developed countries), it conditions the recovery of our economy. The article includes an analysis of the weaknesses, threats, strengths and opportunities of the sector. Further, it is crucial its contribution to make sustainable development of industrial activity. Also, it deals with those opportunities that are presented for the future development of this industry such as eco-design, energy efficiency and life cycle analysis. (Author)

Impact of green supply chain management practices on firms' performance: an empirical study from the perspective of Pakistan.

Science.gov (United States)

Khan, Syed Abdul Rehman; Qianli, Dong

2017-07-01

This article investigates the impact of five determinants of the green supply chain practices on organizational performance in the context of Pakistan manufacturing firms. A sample of 218 firms was collected from the manufacturing industry. The green supply chain practices were measured through five independent variables including green manufacturing, green purchasing, green information systems, cooperation with customers, and eco-design. By using exploratory factor and simultaneous regression analysis, the results indicate that except green purchasing, rests of the four independent variables have been found statistically significant to predict organizational performance. However, the eco-design of green practices followed by green information systems has revealed the greatest impact on organizational performance. Therefore, the managers of the manufacturing firms should not only implement eco-design in their supply chain but also concentrate on proper monitoring and implementation of green information systems to increase their firms' performance. A main contribution of this research from theoretical side is that it is possible to notice a negative effect of "green purchasing" towards organizational performance particularly in the scenario of Pakistan manufacturing industry. Another valuable result is that green purchasing is an important antecedent of firms economic performance in the US manufacturing firms (Green et al. 2012), although not significantly related to organizational performance in our study. In addition, we also discussed research limitations, areas for future research, and implications for practitioners.

Evaluating the Effect of Display Realism on Natural Resource Decision Making

Science.gov (United States)

Chong, Steven S.

2018-05-01

Geographic information systems (GIS) facilitate location-based decision making. Despite the improved availability of GIS software to non-professionals, training in cartographic design has not followed suit. Prior research indicates that when presented with map choices, users are influenced by naïve realism, a preference for realistic displays cotaining irrelevant, extraneous details, leading to decreased task efficiency. This study investigated the role of naïve realism in decision making for natural resource management, a field that often employs geospatial tools. Data was collected through a GIS user ability test, a questionnaire and direct observation. Forty volunteer expert and non-expert resource managers evaluated the suitability of different sites for a land management scenario. Each participant was tested on two map display treatments containing different levels of realism - a simpler 2D display and a more complex 3D display - to compare task performance. Performance was measured by task accuracy and task completion time. User perceptions and preferences about the displays were also recorded. Display realism had an impact on performance and there were indications naïve realism was present. Users completed tasks significantly faster on the 2D display and many individuals misjudged which display they were most accurate or fastest with. The results are informative for designing information systems containing interactive maps, particularly for resource management applications. The results also suggest that the order displays were presented had a significant effect and may have implications for teaching users map-based tasks.

Investigating mass customization and sustainability compatibilities

African Journals Online (AJOL)

DR OKE

manufacturing, eco-design and closed loop supply chains (Kleindorfer et al., 2005). ... compromise between pure customisation and mass production, between ..... 3.2 Case A – kitchens manufacturer: Company A is a kitchen manufacturer ...

Product-related Environmental Performance Indicators: a systematic literature review

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2013-01-01

Ecodesign is a proactive environmental management approach employed in the product development process (PDP) which aims to minimize the environmental impacts caused during products’ life-cycle, improving its environmental performance. The establishment of measurable environmental performance...

Age and self-relevance effects on information search during decision making.

Science.gov (United States)

Hess, Thomas M; Queen, Tara L; Ennis, Gilda E

2013-09-01

We investigated how information search strategies used to support decision making were influenced by self-related implications of the task to the individual. Consistent with the notion of selective engagement, we hypothesized that increased self-relevance would result in more adaptive search behaviors and that this effect would be stronger in older adults than in younger adults. We examined search behaviors in 79 younger and 81 older adults using a process-tracing procedure with 2 different decision tasks. The impact of motivation (i.e., self-related task implications) was examined by manipulating social accountability and the age-related relevance of the task. Although age differences in search strategies were not great, older adults were more likely than younger adults to use simpler strategies in contexts with minimal self-implications. Contrary to expectations, young and old alike were more likely to use noncompensatory than compensatory strategies, even when engaged in systematic search, with education being the most important determinant of search behavior. The results support the notion that older adults are adaptive decision makers and that factors other than age may be more important determinants of performance in situations where knowledge can be used to support performance.

Tackling the Relevance of Packaging in Life Cycle Assessment of Virgin Olive Oil and the Environmental Consequences of Regulation.

Science.gov (United States)

Navarro, Alejandra; Puig, Rita; Martí, Elena; Bala, Alba; Fullana-I-Palmer, Pere

2018-04-12

Production and consumption of olive oil is very important in Europe, being this product a basic element in the Mediterranean diet since long ago. The project objective is two-fold: a study of the contribution of virgin olive oils (VOOs) usual packaging to the whole life cycle of the product and a study of the environmental consequences of the Spanish Government regulation on VOO packaging. A life cycle assessment (LCA) according to ISO 14044 has been performed using the CML methodology for the impact assessment. The results show that the packaging influence varies from 2 to 300%, depending on the impact category and type of packaging (glass, tin or polyethylene terephtalate). Glass, which is related to higher quality perception by consumers, was found to be the most influencing material (due to its weight); however, this impact may be fairly reduced by applying ecodesign strategies (such as weight reduction and recycled-glass percentage increase). A new Spanish regulation on the mandatory use of non-refillable oilers in HORECA establishments (hotels, restaurants and caterings) aims to provide more quality assurance and better information to consumers; however, it was also found to mean a 74% increase in greenhouse gases emissions. This regulation was deeply discussed at European level and its application was withdraw due to consumers rejection, except for Spain. The findings of the present case study show that LCA and ecodesign should be important tools to be promoted and applied in policy making to reduce non-desirable consequences of regulation.

Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

Directory of Open Access Journals (Sweden)

Carlos Mario Gutiérrez Aguilar

2017-10-01

Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

Raamatud

Index Scriptorium Estoniae

2008-01-01

Yeang, Ken. Ecodesign : a manual for ecological design. John Wiley & Sons, 2008. Feireiss, Kristin, Feireiss, Lukas. Architecture of change : sustainability and humanity on the built environment. Gestalten Verlag, 2008. Farr, Douglas. Sustainable Urbanism : urban design with nature. John Wiley & Sons, 2007

Implementing Life Cycle Assessment in systems development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh; Hauschild, Michael Zwicky; McAloone, Timothy Charles

2003-01-01

and the rapid changes in markets for many products. The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems...... for the designer in evaluating the environmental benignity of the product from the outset and to provide the designer with a framework for decision support based on the performance evaluation at different stages of the design process. The overall aim of this paper is to produce an in-depth understanding...... of possibilities which can be introduced in the design stage compared to the other life cycle stages of the product system. The paper collects experiences and ideas around the state-of-the-art in eco-design, from literature and personal experience and further provides eco-design life cycle assessment strategies...

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

Energy Technology Data Exchange (ETDEWEB)

Bereketli Zafeirakopoulos, Ilke, E-mail: ibereketli@gsu.edu.tr; Erol Genevois, Mujde, E-mail: merol@gsu.edu.tr

2015-09-15

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, except for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between aspects

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

International Nuclear Information System (INIS)

Bereketli Zafeirakopoulos, Ilke; Erol Genevois, Mujde

2015-01-01

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, except for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between aspects

Teaching Strategic and Sustainable Design

NARCIS (Netherlands)

Wever, R.; Peck, D.; De Eyto, A.

2013-01-01

Sustainable innovation comes in many forms and sizes. There are different philosophies about how to design, such as EcoDesign, bio-mimicry and Cradle-to-cradle. There are differences in organizational contexts, such as multinationals, small and medium sized enterprises, start-ups and design

Computer Aided Product Service Systems Design : Service CAD and Its integration with Life Cycle Simulation

NARCIS (Netherlands)

Komoto, H.

2009-01-01

Integration of product design into service design, or vice versa, is considered to bring more efficient and effective value addition. Besides EcoDesign tools and methods, a methodology to design such an integration of products and services from a systemic perspective, or product-service systems

Transitions in Sustainable Product Design Research

DEFF Research Database (Denmark)

Boks, Casper; McAloone, Tim C.

2009-01-01

By the early 1990s, sustainable product innovation (or ecodesign, or Design for environment) had gained sufficient critical mass in academic research to be identified as a distinct research area. In the past 15 years, stimulated by a growing environmental concern and awareness in the media...... of transitions; this is illustrated by discussing characteristic aspects of each transition, which together provide a historic account of how academic research into sustainable product innovation had matured. In conclusion, a number of possible future transitions or extensions of the research area are discussed......., this research area has expanded considerably; from a bunch of opportunistic eco-pathfinders trying to make products better recyclable into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number...

Fostering change to sustainable consumption and production: An evidence based view

DEFF Research Database (Denmark)

Tukker, Arnold; Emmert, Sophie; Charter, Martin

2008-01-01

for action to change to SCP that mentions the key domains to include food, mobility, and energy use/housing (the last two clearly related to urban development). It should use a systemic perspective on the SCP challenge and differentiate between developed, fast developing, and base of the pyramid economies....... SCORE! focuses mainly on developed economics, and here we propose to differentiate between: (1) measures that fit with mainstream beliefs and paradigms. Here, governments could-make operational agreements on implementation of instruments like green public procurement, stimulating ecodesign, etc. (2......) Problems where a rough agreement on goals exists, but where change is radical, or means are uncertain, and hence planning difficult. Here, governments could foster visioning, experimentation, and support e.g. international collaboration in leapfrogging programs. (3) Problems that outright clash...

Unadjusted Bivariate Two-Group Comparisons: When Simpler is Better.

Science.gov (United States)

Vetter, Thomas R; Mascha, Edward J

2018-01-01

Wilcoxon-Mann-Whitney test is instead preferred. When making paired comparisons on data that are ordinal, or continuous but nonnormally distributed, the Wilcoxon signed-rank test can be used. In analyzing their data, researchers should consider the continued merits of these simple yet equally valid unadjusted bivariate statistical tests. However, the appropriate use of an unadjusted bivariate test still requires a solid understanding of its utility, assumptions (requirements), and limitations. This understanding will mitigate the risk of misleading findings, interpretations, and conclusions.

ECODESIGN CRITERIA FOR COMPOSITE MATERIALS AND ...

African Journals Online (AJOL)

into mechanical characterization tests, in advanced composite formulations and ... of aerospace & automobile, marine construction, renewable energy, modern ... These eco-coefficients are to be inserted into the classical lamination theory.

Energy Efficient Televisions

DEFF Research Database (Denmark)

Andersen, Rikke Dorothea; Remmen, Arne

The EuP Directive sets the frame for implementing ecodesign requirements for energy-using and energy-related products. The aim of the Directive is to achieve a high level of protection for the environment by reducing the potential environmental impact of energy-related products. The focus...

Playing in three makes it simpler: Mapping the cognitive figure-ground framework onto cancer-immunology and immunotherapy (Review)

Czech Academy of Sciences Publication Activity Database

Gidron, Y.; Vannucci, Luca

2010-01-01

Roč. 36, č. 5 (2010), s. 1061-1065 ISSN 1019-6439 R&D Projects: GA AV ČR IAA500200917 Institutional research plan: CEZ:AV0Z50200510 Keywords : immune system * cancer development * tumour escape Subject RIV: EC - Immunology Impact factor: 2.571, year: 2010

Effectively universal behavior of rotating neutron stars in general relativity makes them even simpler than their Newtonian counterparts.

Science.gov (United States)

Pappas, George; Apostolatos, Theocharis A

2014-03-28

Recently, it was shown that slowly rotating neutron stars exhibit an interesting correlation between their moment of inertia I, their quadrupole moment Q, and their tidal deformation Love number λ (the I-Love-Q relations), independently of the equation of state of the compact object. In the present Letter a similar, more general, universality is shown to hold true for all rotating neutron stars within general relativity; the first four multipole moments of the neutron star are related in a way independent of the nuclear matter equation of state we assume. By exploiting this relation, we can describe quite accurately the geometry around a neutron star with fewer parameters, even if we don't know precisely the equation of state. Furthermore, this universal behavior displayed by neutron stars could promote them to a more promising class of candidates (next to black holes) for testing theories of gravity.

Life Cycle Assessment on a 765 kV Venezuelan Transmission System

International Nuclear Information System (INIS)

Wang, Wenlu; Tremouille, Gilles; Beroual, Abderrahmane; Bessede, Jean-Luc

2011-03-01

The demand to preserve the environment and form a sustainable development is greatly increasing in the recent decades all over the world, and this environmental concern is also merged in electrical power industry, resulting in many eco-design approaches in T and D industries. As a method of eco-design, Life Cycle Assessment (LCA) is a systematic tool that enables the assessment of the environmental impacts of a product or service throughout its entire life cycle, i.e. raw material production, manufacture, distribution, use and disposal including all intervening transportation steps necessary or caused by the product's existence. In T and D industries, LCA has been done for a lot of products individually, in order to see one product's environmental impacts and to seek for ways of improving its environmental performance. This eco-design for product approach is a rather well-developed trend, however, as only a single electrical product cannot provide the electrical power to users, electrical system consists of a huge number of components, in order to investigate system's environmental profile, the entire environmental profiles of different composing products has to be integrated systematically, that is to say, a system approach is needed. Under this philosophy, in this paper, an LCA using SimaPro (one kind of LCA software) is conducted on a whole Venezuelan 765 kV AC transmission system, which transmits 8000 MW hydro-electrical power through 760 km to this country's load centers, with total 7 substations, i.e. one sending end, 2 intermediate substations and 4 receiving ends. This LCA includes both transmission lines and substations, and then the environmental impacts of the whole transmission system are investigated. (authors)

Validation of the CORB75 (confusion, oxygen saturation, respiratory rate, blood pressure, and age ≥ 75 years) as a simpler pneumonia severity rule.

Science.gov (United States)

Ochoa-Gondar, O; Vila-Corcoles, A; Rodriguez-Blanco, T; Hospital, I; Salsench, E; Ansa, X; Saun, N

2014-04-01

This study compares the ability of two simpler severity rules (classical CRB65 vs. proposed CORB75) in predicting short-term mortality in elderly patients with community-acquired pneumonia (CAP). A population-based study was undertaken involving 610 patients ≥ 65 years old with radiographically confirmed CAP diagnosed between 2008 and 2011 in Tarragona, Spain (350 cases in the derivation cohort, 260 cases in the validation cohort). Severity rules were calculated at the time of diagnosis, and 30-day mortality was considered as the dependent variable. The area under the receiver operating characteristic curves (AUC) was used to compare the discriminative power of the severity rules. Eighty deaths (46 in the derivation and 34 in the validation cohorts) were observed, which gives a mortality rate of 13.1 % (15.6 % for hospitalized and 3.3 % for outpatient cases). After multivariable analyses, besides CRB (confusion, respiration rate ≥ 30/min, systolic blood pressure AUC statistics for predicting mortality in the derivation and validation cohorts were 0.79 and 0.82, respectively. In the derivation cohort, a CORB75 score ≥ 2 showed 78.3 % sensitivity and 65.5 % specificity for mortality (in the validation cohort, these were 82.4 and 71.7 %, respectively). The proposed CORB75 scoring system has good discriminative power in predicting short-term mortality among elderly people with CAP, which supports its use for severity assessment of these patients in primary care.

Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

Energy Technology Data Exchange (ETDEWEB)

Gallego-Schmid, Alejandro, E-mail: alejandro.gallegoschmid@manchester.ac.uk; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

2016-07-15

Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

International Nuclear Information System (INIS)

Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

2016-01-01

Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

Integrating Environmental Decisions into the Product Development Process: Part 2 - The Later Stages

DEFF Research Database (Denmark)

Poole, S.; Simon, M; Sweatman, A.

1999-01-01

, Central Europe, and the USA are carrying out ecodesign. The survey also investigated the successes and failures that compnies have experienced and the lessons learned along the way. Part 1 of this two-part paper focuses on the early stages of the product development process. It shows how products can...

Maturity-based approach for the development of environmentally sustainable product/service-systems

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

the early stages of the development process. This paper aims to identify the best practices for PSS development, based on a systematic literature review, and to propose their integration into an existing maturity model for ecodesign, the EcoM2, into which 30 best practices for PSS development are identified...

Combined Life Cycle Assessment and Life Cycle Costing in the Eco-Care-Matrix: A case study on the performance of a modernized manufacturing system for glass containers

DEFF Research Database (Denmark)

Auer, Johannes; Bey, Niki; Schäfer, Johannes-Marius

2017-01-01

Cycle Assessment, as well as Life Cycle Costing (LCC). The results were then to be displayed in an Eco-Care-Matrix (ECM) in order to quantitatively visualize the improvements when comparing the updated manufacturing system to the previous one and they were to be discussed in terms of (i) ecodesign...

Taking up the sustainability challenge

DEFF Research Database (Denmark)

McAloone, Tim C.

2009-01-01

? And how much can we, or should we, design? What is surprising is that around 90% of the waste associated with the average mechanical or mechatronic product has occurred before end-users even get their hands on it. And if the product bears a plug or a battery, it will probably continue to make its most...... optimization for environmental improvement. The tough issue, however, is how to integrate these resources into each and every product development process. The answer, of course, is motivation. What will motivate a company to begin applying environmental improvements into its business practices and, therefore......, also the products? Beyond the altruistic ideals of a few individual employees, motivation can be found in three main sources: regulation (or the threat hereof), market factors, and innovation opportunities. All three of these sources are very relevant for the necessary implementation of ecodesign...

Static fuel molten salt reactors - simpler, cheaper and safer

International Nuclear Information System (INIS)

Scott, Ian

2015-01-01

The many conceptual designs for Molten Salt Reactors (MSR's) today are all evolutions from the prototype MSR that went critical at Oak Ridge 50 years ago. Critically, they are based on pumping the molten fuel salt from a reaction chamber where the fuel achieves critical mass through a heat exchanger where the resulting heat is transferred to another working fluid. This basic concept was not the first idea that the Oak Ridge scientists considered. Their initial preference was to put the molten salt fuel into tubes, just like solid fuel pellets in their cladding, and circulate a coolant past the tubes. They concluded however that the low thermal conductivity of the salt meant that the tubes could be no wider than 2mm which would be entirely impractical. In this analysis they ignored the contribution of convection to heat transfer in fluids, probably because they were designing an aircraft engine where varying g forces would make convection unreliable. Moltex Energy has re-examined this decision using the modern tools of computational fluid dynamics to simulate convective flow in the molten salt and discovered that in fact tubes of similar diameter to those used for solid fuels are entirely practical. Power densities of 250kW/litre of fuel salt are readily attainable providing a higher overall power density than a PWR reactor. This discovery permits MSR's to be built without any of the complex pumping, passively safe drain systems, on line degassing, filtration and chemical processing needed in pumped MSR's. Their design is very simple and they have many intrinsic safety factors including low pressure operation, chemically unreactive fluids and strongly negative fuel thermal and coolant voiding reactivity coefficients. Most importantly, the highly radioactive fission products are retained in non-volatile form within the fuel tubes in the reactor core. Radioactive fuel salt never leaves the reactor vessel except in an immobile frozen form during

Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

Science.gov (United States)

González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

2012-06-01

The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

Life cycle environmental impacts of vacuum cleaners and the effects of European regulation.

Science.gov (United States)

Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F; Jeswani, Harish Kumar; Azapagic, Adisa

2016-07-15

Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%-44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%-109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (impacts would be 2%-21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%-20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should be broadened to reduce the impacts from raw materials, production and end

THE SIGNIFICANCE OF ECOLOGICAL AWARENESS IN VISUAL COMMUNICATION DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Aristarchus Pranayama

2005-01-01

Full Text Available Dalam era dimana kepedulian terhadap lingkungan sangatlah penting%2C desain komunikasi visual perlu memperhitungkan pengintegrasian kesadaran ekologis dalam program pendidikannya. Prinsip bentuk dan fungsi tidaklah cukup lagi dalam menentukan kesuksesan sebuah desain. Pembelajaran lebih lanjut mengenai eco-design – atau sering disebut green design atau sustainable design – membuktikan pentingnya pemahaman mengenai proses desain secara menyeluruh%2C keterkaitannya dengan bidang-bidang lain%2C dan dampaknya terhadap lingkungan. Para pengajar desain dapat berperan dalam menumbuhkan calon “desainer warga” melalui pendidikan desain komunikasi visual yang mengimplementasikan kesadaran ekologis. Dengan kesadaran bahwa pilihan dan keputusan yang diambil para desainer berpengaruh%2C nantinya kekuatan dampak desain dapat digunakan untuk membuat perubahan yang positif Abstract in Bahasa Indonesia : In this day of age where environmental concern is critical%2C visual communication design has to consider an integration of ecological awareness into its education programs. The principles of form and function alone are not enough anymore to evaluate a design’s success. Further studies of eco-design – often called green design or sustainable design – would prove to be important in the understanding of the design process as a whole%2C its interconnectedness with other fields%2C and its impact towards the environment. Design educators can play a role in cultivating future “citizen designers” through visual communication design education which implement ecological awareness. In our awareness as designers that our choices and decisions matter can in turn utilizes design’s powerful impact to create positive change. eco-design%2C green design%2C sustainable design%2C pendidikan desain komunikasi visual%2C kesadaran ekologis%2C lingkungan.

Modern electronic structure theory and applications in organic chemistry

CERN Document Server

Davidson, ER

1997-01-01

This volume focuses on the use of quantum theory to understand and explain experiments in organic chemistry. High level ab initio calculations, when properly performed, are useful in making quantitative distinctions between various possible interpretations of structures, reactions and spectra. Chemical reasoning based on simpler quantum models is, however, essential to enumerating the likely possibilities. The simpler models also often suggest the type of wave function likely to be involved in ground and excited states at various points along reaction paths. This preliminary understanding is n

Materials science: Like cartilage, but simpler

DEFF Research Database (Denmark)

Skov, Anne Ladegaard

2015-01-01

The properties of articular cartilage, which lines bones in joints, depend partlyon repulsion between components of the material. A new synthetic gel that mimics this feature has rare, direction-dependent properties.......The properties of articular cartilage, which lines bones in joints, depend partlyon repulsion between components of the material. A new synthetic gel that mimics this feature has rare, direction-dependent properties....

Ny simplere diagnosticering af multipel sklerose

DEFF Research Database (Denmark)

Mathiesen, Henrik Kahr; Sørensen, Per Soelberg

2012-01-01

The 2010 revision of the McDonald diagnostic criteria for multiple sclerosis is reviewed. The diagnostic criteria have been simplified, which allows earlier diagnosis and treatment of multiple sclerosis.......The 2010 revision of the McDonald diagnostic criteria for multiple sclerosis is reviewed. The diagnostic criteria have been simplified, which allows earlier diagnosis and treatment of multiple sclerosis....

Application of Chimera Composite Grid Scheme to Ship Appendages

National Research Council Canada - National Science Library

Lin, Cheng-Wen

1995-01-01

.... The chimera scheme of grid generation uses a system of relatively simple grids. The grids each define a particular component of the overall geometry, making the initial grid generation much simpler...

Life-Cycle Assessment of Solar Charger with Integrated Organic Photovoltaics

DEFF Research Database (Denmark)

Benatto, Gisele Alves dos Reis; Espinosa Martinez, Nieves; Krebs, Frederik C

2017-01-01

OPV panel, enabling the possibility to be charged from the sun, and not only from the grid. In this paper, two well-established power bank products using amorphous silicon solar panels (a-Si PV) and a regular power bank without any portable solar panel is compared to HeLi-on. The environmental impact...... of the products is quantified with the aim of indicate where eco-design improvements would make a difference and to point out performance of a portable solar panel depending on the context of use (Denmark and China), realistic disposal scenarios and the recycling relevance particularly concerning metals content.......Organic photovoltaics (OPV) applied in a commercial product comprising a solar charged power bank is subjected to a life cycle assessment (LCA) study. Regular power banks harvest electricity from the grid only. The solar power bank (called HeLi-on) is however, a power bank that includes a portable...

Eco-marketing and eco-design of products

Directory of Open Access Journals (Sweden)

Filipović Jovan

2007-01-01

Full Text Available Environmental marketing (Eco-marketing, as a relatively new movement, emerged at the beginning of the 20th century, is in the growing phase of its development. Eco-labeling and other ways/types of eco-marketing are attracting more attention of consumers, since they are aware of the necessity of nature conservation and environmental protection. There has been a lot of misunderstanding and miss leadings in interpretation and substantiation of ecomarketing claims in previous period of time. One of the most concrete improvements in eco-marketing was appearance and establishment of ISO 14020 guidelines. ISO 14020 guidelines are integral part of ISO 14000 series of standards, which could be implemented in eco-marketing. At the same time, development of "green" products and marketing of "green" products, are direct positive contributions to resources reduction, environmental protection and sustainable economic development. Companies designing this kind of products can expect better position on the market, improvement of competitiveness, reduction of expenses (less raw materials, less waste, less harmful effects on the environment, raising corporate social responsibility, higher export.

Addressing resource efficiency through the Ecodesign Directive

DEFF Research Database (Denmark)

Dalhammar, Carl Johan; Machacek, Erika; Bundgaard, Anja

related to energy efficiency, but there is potential for setting legal standards that increase product durability and promote the future re-use and recycling of components and materials. This paper examines the potential benefits and disadvantages in applying the Directive for this purpose, and analyzes...

Natural fibre selection for composite eco-design

DEFF Research Database (Denmark)

Corona, Andrea; Madsen, Bo; Hauschild, Michael Zwicky

2016-01-01

Natural fibre composites (NFC) are gaining interest in manufacturing because they address some of the environmental problems of traditional composites: use of non-renewable resources, and large impacts related to their production and disposal. Since natural fibres are not yet optimized...... for composite production, it is crucial to identify the most appropriate applications, and determine the optimal fibre/matrix ratio. A methodology is proposed for early-stage decisions support on selection of bio-composite materials. Results help identify the application with the largest reduction...

Iterative optimization of performance libraries by hierarchical division of codes

International Nuclear Information System (INIS)

Donadio, S.

2007-09-01

The increasing complexity of hardware features incorporated in modern processors makes high performance code generation very challenging. Library generators such as ATLAS, FFTW and SPIRAL overcome this issue by empirically searching in the space of possible program versions for the one that performs the best. This thesis explores fully automatic solution to adapt a compute-intensive application to the target architecture. By mimicking complex sequences of transformations useful to optimize real codes, we show that generative programming is a practical tool to implement a new hierarchical compilation approach for the generation of high performance code relying on the use of state-of-the-art compilers. As opposed to ATLAS, this approach is not application-dependant but can be applied to fairly generic loop structures. Our approach relies on the decomposition of the original loop nest into simpler kernels. These kernels are much simpler to optimize and furthermore, using such codes makes the performance trade off problem much simpler to express and to solve. Finally, we propose a new approach for the generation of performance libraries based on this decomposition method. We show that our method generates high-performance libraries, in particular for BLAS. (author)

'Green' ventilators. Ventilators as a unit consisting of runner, motor and electronics; 'Gruene' Ventilatoren. Ventilatoren als Einheit aus Laufrad, Motor und Elektronik

Energy Technology Data Exchange (ETDEWEB)

Sigloch, Uwe [ebm-papst Mulfingen GmbH und Co. KG (Germany). Bereich Lueftungs- und Klimatechnik; Reiff, Ellen-Christine [Redaktionsbuero Stutensee (Germany)

2011-07-01

In 2009, the 2005 discharged EuP Directive (Energy using products directive) were renamed in ErP Directive (Energy related Products Directive) and is well-known in Germany also under the designation eco-design Directive. The ErP Directive has effects on many energy-using facilities. In addition fans were used for which obligatory limit values were specified in June 2010.

Decision-Making Risks Concerning the Construction of the Goiania Waste Repository

International Nuclear Information System (INIS)

Paschoa, A.S.; Rozental, J.J.; Tranjan Filho, A.

2001-01-01

fixed risk coefficient applied to repositories needs to be further addressed, because it is in essence a translation of the LNT hypothesis. The decision to make the final repository for the remnants of the Goiania accident was a successful one, but one has to take into proper consideration, at least retrospectively, that the decision-making process was facilitated because the problem of Goiania was much simpler than the case of a repository for LLRW in general

How to make sticky tapes stickier

Science.gov (United States)

Ponson, Laurent; Xia, Shuman; Ravichandran, Guruswami; Bhattacharya, Kaushik; California Institute of Technology Team

2011-03-01

Thin film adhesives have become increasingly important in various applications such as packaging and coating, and we benefit daily of their adhesion properties by using various kinds of tapes. Despite the apparent simplicity of these systems, a certain number of questions remain open. In particular, important efforts have been deployed recently to understand the effect of the complex tridimensional and highly heterogeneous structure at the interface of some adhesives, such as the one encountered in nature like the geckos toes. Although inspired by these natural adhesives, we studied a much simpler system, and however largely unexplored: a thin film with spatially varying adhesion energy and elastic properties. We will show how these heterogeneities introduced at the microscale can generate quite unexpected macroscopic behaviors, and that one can this way design stronger adhesives with new properties. Beyond their practical interests, these systems involve long range elastic interactions and heterogeneities resulting in a rich and complex physics that will be illustrated through experimental examples and their theoretical interpretation.

Construction of a low-cost luximeter

Science.gov (United States)

Pedroso, L. S.; de Macedo, J. A.; de Araújo, M. S. T.; Voelzke, M. R.

2016-04-01

This paper proposes the construction of an electronic instrument called digital luximeter, combining simplicity and low cost, making it simpler and cheaper than those on the market. Its construction tends to facilitate dissemination and access to this type of measuring instrument between high school teachers and educational institutions, making it ideal to be a science lab.

Factors Affecting Green Supply Chain Operational Performance of the Thai Auto Parts Industry

Directory of Open Access Journals (Sweden)

Korrakot Yaibuathet Tippayawong

2016-11-01

Full Text Available In this work, operational performance in the green supply chain management (SCM of the Thai auto parts industry was investigated. A green supply chain performance measurement (GSPM model was developed from the combination of various concepts including an SCM logistics scorecard, a supply chain operations reference model, a balance scorecard, and green supply chain management. The GSPM has been designed for use as a self-evaluation tool focusing on five decisive areas, or factors, and 28 sub-factors. A factor analysis was conducted using the survey results of the GSPM in order to identify significant factors that represent the green supply chain operation performance. Grouped as three major factors, namely green procurement, green transportation, and green manufacturing; reverse logistics and eco-design; and reuse and recycle of manufacturing, their significance and impact on the auto parts industry in Thailand were highlighted. Specifically, the factor of green procurement, green transportation, and green manufacturing, as major factor 1, in relation with the factor of reverse logistics and eco-design, as major factor 2, were found to have a strong positive relationship with the asset turnover ratio.

Life cycles of energetic systems

International Nuclear Information System (INIS)

Adnot, Jerome; Marchio, Dominique; Riviere, Philippe; Duplessis, B.; Rabl, A.; Glachant, M.; Aggeri, F.; Benoist, A.; Teulon, H.; Daude, J.

2012-01-01

This collective publication aims at being a course for students in engineering of energetic systems, i.e. at learning how to decide to accept or discard a project, to select the most efficient system, to select the optimal system, to select the optimal combination of systems, and to classify independent systems. Thus, it presents methods to analyse system life cycle from an energetic, economic and environmental point of view, describes how to develop an approach to the eco-design of an energy consuming product, how to understand the importance of hypotheses behind abundant and often contradicting publicised results, and to be able to criticise or to put in perspective one's own analysis. The first chapters thus recall some aspects of economic calculation, introduce the assessment of investment and exploitation costs of energetic systems, describe how to assess and internalise environmental costs, present the territorial carbon assessment, discuss the use of the life cycle assessment, and address the issue of environmental management at a product scale. The second part proposes various case studies: an optimal fleet of thermal production of electric power, the eco-design of a refrigerator, the economic and environmental assessment of wind farms

A Sensitivity Analysis Approach to Identify Key Environmental Performance Factors

Directory of Open Access Journals (Sweden)

Xi Yu

2014-01-01

Full Text Available Life cycle assessment (LCA is widely used in design phase to reduce the product’s environmental impacts through the whole product life cycle (PLC during the last two decades. The traditional LCA is restricted to assessing the environmental impacts of a product and the results cannot reflect the effects of changes within the life cycle. In order to improve the quality of ecodesign, it is a growing need to develop an approach which can reflect the changes between the design parameters and product’s environmental impacts. A sensitivity analysis approach based on LCA and ecodesign is proposed in this paper. The key environmental performance factors which have significant influence on the products’ environmental impacts can be identified by analyzing the relationship between environmental impacts and the design parameters. Users without much environmental knowledge can use this approach to determine which design parameter should be first considered when (redesigning a product. A printed circuit board (PCB case study is conducted; eight design parameters are chosen to be analyzed by our approach. The result shows that the carbon dioxide emission during the PCB manufacture is highly sensitive to the area of PCB panel.

Remanufacturing Aided Added-Value Creation, Innovations Meeting to Deliver Sustainable Manufacturing

Science.gov (United States)

Tariq Abullah, Ziyad; Guo, Shun Sheng; Yun, Sheng Bu

2015-05-01

End-of-life scrap steel such as vehicles bulks and bodies, steel wheel and shells are easily land filled at the end-of-life when treated in a developing country with non-industrial infrastructure. Research idea is about composite shape steel remanufacturing to be sheet steel for construction application through nested recovered pieces of scrap steel within new sheet steel base to meet innovation value creation of remanufactured steel and innovation eco-design of steel products to close supply chain through linkage developed and developing countries of non-industrial infrastructure economy. That can be satisfied through comprehensive business- education-training model conduction firstly at the developing countries to reduce costs and change the intensive labour remanufacturing paradigm collaboratively. Sustainable remanufacturing business model can be applied based on infrastructure of educational institutions such as institutes of technology to adopt environmental, economic, and social developments as triple bottom line sustainability. Such innovation value creation is driven by eco-design and eco-innovation enabling where the meet to deliver human development, employment, and education conscious environment and bench mark recommendations of development directions for upgrading to apply business that allows eco-societies to emerge, through cooperative steel scrap processing.

A new proof for the convergent iterative solution of the degenerate quantum double-well potential and its generalization

International Nuclear Information System (INIS)

Friedberg, R.; Lee, T.D.

2003-01-01

We present a new and simpler proof for the convergent iterative solution of the one-dimensional degenerate double-well potential. This new proof depends on a general theorem, called the hierarchy theorem, that shows the successive stages in the iteration to form a monotonically increasing sequence of approximations to the energy and to the wavefunction at any point x. This important property makes possible a much simpler proof of convergence than the one given before in the literature. The hierarchy theorem proven in this paper is applicable to a much wider class of potentials which includes the quartic potential

Simpler ISS Flight Control Communications and Log Keeping via Social Tools and Techniques

Science.gov (United States)

Scott, David W.; Cowart, Hugh; Stevens, Dan

2012-01-01

The heart of flight operations control involves a) communicating effectively in real time with other controllers in the room and/or in remote locations and b) tracking significant events, decisions, and rationale to support the next set of decisions, provide a thorough shift handover, and troubleshoot/improve operations. International Space Station (ISS) flight controllers speak with each other via multiple voice circuits or loops, each with a particular purpose and constituency. Controllers monitor and/or respond to several loops concurrently. The primary tracking tools are console logs, typically kept by a single operator and not visible to others in real-time. Information from telemetry, commanding, and planning systems also plays into decision-making. Email is very secondary/tertiary due to timing and archival considerations. Voice communications and log entries supporting ISS operations have increased by orders of magnitude because the number of control centers, flight crew, and payload operations have grown. This paper explores three developmental ground system concepts under development at Johnson Space Center s (JSC) Mission Control Center Houston (MCC-H) and Marshall Space Flight Center s (MSFC) Payload Operations Integration Center (POIC). These concepts could reduce ISS control center voice traffic and console logging yet increase the efficiency and effectiveness of both. The goal of this paper is to kindle further discussion, exploration, and tool development.

Cumulative Dominance and Probabilistic Sophistication

NARCIS (Netherlands)

Wakker, P.P.; Sarin, R.H.

2000-01-01

Machina & Schmeidler (Econometrica, 60, 1992) gave preference conditions for probabilistic sophistication, i.e. decision making where uncertainty can be expressed in terms of (subjective) probabilities without commitment to expected utility maximization. This note shows that simpler and more general

Investigating a training supporting shared decision making (IT'S SDM 2011: study protocol for a randomized controlled trial

Directory of Open Access Journals (Sweden)

Geiger Friedemann

2011-10-01

. Discussion Due to the rigorous blinded randomized controlled design, the current trial promises valid and reliable results. On the one hand, we expect this condensed time-saving training to be adopted in clinical routine more likely than previous trainings. On the other hand, the exhaustivity of the MAPPIN'SDM measurement system qualifies it as a reference measure for simpler instruments and to deepen understanding of decision-making processes. Trial registration Current Controlled Trials ISRCTN78716079

Economic characteristics of a smaller, simpler reactor

International Nuclear Information System (INIS)

LaBar, M.; Bowers, H.

1988-01-01

Reduced load growth and heightened concern with economic risk has led to an expressed utility preference for smaller capacity additions. The Modular High Temperature Reactor (MHTGR) plant has been developed as a small, simple plant that has limited financial risk and is economically competitive with comparatively sized coal plants. Competitive economics is achieved by the simplifications made possible in a small MHTGR, reduction in the quantity of nuclear grade construction and design standardization and certification. Assessments show the MHTGR plant to have an economic advantage over coal plants for plant sizes from 270 MWe to 1080 MWe. Financial risk is limited by small unit sizes and short lead times that allow incremental deployment. Evaluations show the MHTGR incremental deployment capability to reduce negative cash flows by almost a factor of 2 relative to that required by a single large nuclear plant

Decision-Making Risks Concerning the Construction of the Goiania Waste Repository

Energy Technology Data Exchange (ETDEWEB)

Paschoa, A.S. [Pontificia Univ. Catolica, Rio de Janeiro (Brazil); Rozental, J.J. [Ministry of Environment (Israel); Tranjan Filho, A. [Comissao Nacional de Energia Nuclear (CNEN) (Brazil)

2001-07-01

problem of a fixed, or near fixed risk coefficient applied to repositories needs to be further addressed, because it is in essence a translation of the LNT hypothesis. The decision to make the final repository for the remnants of the Goiania accident was a successful one, but one has to take into proper consideration, at least retrospectively, that the decision-making process was facilitated because the problem of Goiania was much simpler than the case of a repository for LLRW in general.

Hospice decision making: diagnosis makes a difference.

Science.gov (United States)

Waldrop, Deborah P; Meeker, Mary Ann

2012-10-01

This study explored the process of decision making about hospice enrollment and identified factors that influence the timing of that decision. This study employed an exploratory, descriptive, cross-sectional design and was conducted using qualitative methods. In-depth in-person semistructured interviews were conducted with 36 hospice patients and 55 caregivers after 2 weeks of hospice care. The study was guided by Janis and Mann's conflict theory model (CTM) of decision making. Qualitative data analysis involved a directed content analysis using concepts from the CTM. A model of hospice enrollment decision making is presented. Concepts from the CTM (appraisal, surveying and weighing the alternatives, deliberations, adherence) were used as an organizing framework to illustrate the dynamics. Distinct differences were found by diagnosis (cancer vs. other chronic illness, e.g., heart and lung diseases) during the pre-encounter phase or before the hospice referral but no differences emerged during the post-encounter phase. Differences in decision making by diagnosis suggest the need for research about effective means for tailored communication in end-of-life decision making by type of illness. Recognition that decision making about hospice admission varies is important for clinicians who aim to provide person-centered and family-focused care.

Investigating the use of interval algebra to schedule mechanically steered multistatic radars

CSIR Research Space (South Africa)

Focke, RW

2015-02-01

Full Text Available to test random target locations and motion. A novel IA algorithm that makes use of reduced point algebra was generated that allowed execution time to be reduced. Another, simpler novel contribution was an IA algorithm that ensured that radar tasks are only...

Type-Directed Elaboration of Quasiquotations

DEFF Research Database (Denmark)

Christiansen, David Raymond

2014-01-01

Idris's reflection features allow Idris metaprograms to manipulate a representation of Idris's core language as a datatype, but these reflected terms were designed for ease of type checking and are therefore exceedingly verbose and tedious to work with. A simpler notation would make these programs...

Wood Density as a Conservation Tool: Quantification of Disturbance and Identification of Conservation-Priority Areas in Tropical Forests

NARCIS (Netherlands)

Slik, J.W.F.; Bernard, C.S.; Breman, F.C.; Beek, van M.; Salim, A.; Sheil, D.

2008-01-01

Inventories of tree species are often conducted to guide conservation efforts in tropical forests. Such surveys are time consuming, demanding of expertise, and expensive to perform and interpret. Approaches to make survey efforts simpler or more effective would be valuable. In particular, it would

Assessment of Environmental Performance of TiO2 Nanoparticles Coated Self-Cleaning Float Glass

Directory of Open Access Journals (Sweden)

Martina Pini

2017-01-01

Full Text Available In recent years, superhydrophilic and photocatalytic self-cleaning nanocoatings have been widely used in the easy-to-clean surfaces field. In the building sector, self-cleaning glass was one of the first nanocoating applications. These products are based on the photocatalytic property of a thin layer of titanium dioxide (TiO2 nanoparticles deposited on the surface of any kind of common glass. When exposed to UV radiation, TiO2 nanoparticles react with the oxygen and water molecules adsorbed on their surface to produce radicals leading to oxidative species. These species are able to reduce or even eliminate airborne pollutants and organic substances deposited on the material’s surface. To date, TiO2 nanoparticles’ benefits have been substantiated; however, their ecological and human health risks are still under analysis. The present work studies the ecodesign of the industrial scale-up of TiO2 nanoparticles self-cleaning coated float glass production performed by the life cycle assessment (LCA methodology and applies new human toxicity indicators to the impact assessment stage. Production, particularly the TiO2 nanoparticle application, is the life cycle phase most contributing to the total damage. According to the ecodesign approach, the production choices carried out have exacerbated environmental burdens.

Could Black Be the New Gold? Design-Driven Challenges in New Sustainable Luxury Materials for Jewelry

Directory of Open Access Journals (Sweden)

Beatrice Lerma

2017-12-01

Full Text Available Is there a new material for use in jewelry, matching gold and precious stones, capable of maintaining the same perception of “preciousness” but that is also more sustainable, ethical, and inexpensive? This article deals with a case study within the European EcoDesign Network research project, aimed at investigating how sustainable design can help prestigious companies pinpoint new materials for the creation of jewelry, focusing on new and environmentally friendly opportunities while preserving their market position and target audience. Qualitative and quantitative analyses were performed. Adopting the exploring design path, a jewelry background analysis pointed out both stereotypes and possible innovations in the jewelry field: an analysis was carried out on the perception of jewels by a panel guided by a cognitive ergonomics specialist, also using the eye-tracking machine to examine participants’ reactions to the jewelry involved in the study, and to establish paradigms of sustainability, preciousness, and innovation. Several meta-project proposals regarding innovations in materials and finishing were hypothesized and tested, following the main guidelines and principles of ecodesign. Lastly, a prototyping phase and some mechanical tests were implemented to verify the hypotheses of innovation. The results allowed the creation of a first set of sustainable jewelry, currently on the market.

Fuzzy Cognitive Map-based selection of TRIZ (Theory of Inventive Problem Solving) trends for eco-innovation of ceramic industry products

OpenAIRE

Vidal, Rosario; Salmerón, José Luís; Mena Nieto, Angel Isidro; Chulvi Ramos, Vicente

2015-01-01

Several studies have been developed implementing TRIZ (Russian acronym of Theory of Inventive Problem Solving) for eco-innovative design tasks, es- tablishing a link between eco-efficiency and the Inventive Principles and the Contradiction Matrix. However, very few works have linked TRIZ evolution trends and eco-design. This paper presents an innovative methodology to help designers to pre- dict technological evolutions for more environmentally friendly products. The main novelty of our pr...

Tracking environmental costs

International Nuclear Information System (INIS)

Blahutova, Z.

2011-01-01

Tracking Environmental Costs and Investments in SAP will provide us with a managerial tool that will help us understand better the magnitude of the financial resources we are dedicating to environmental protection activities and investments. Environmental Cost Accounting is a new project in Slovenske Elektrarne that will be particularly valuable for the Company's environmental management initiatives, such as waste monitoring, cleaner production, eco-design and environmental management systems; its launch is expected in September. (author)

Evading the Burden of Proof in European Union Soft Law Instruments : The Case of Commission Recommendations

NARCIS (Netherlands)

Andone, C.; Greco, S.

2018-01-01

The European Union is making increased efforts to find simpler and more effective ways to function adequately in the eyes of its citizens by using ‘soft law’ instruments such as recommendations. Although they have no legally binding force, recommendations have practical and legal effects occurring

Structural estimation of jump-diffusion processes in macroeconomics

DEFF Research Database (Denmark)

Posch, Olaf

2009-01-01

This paper shows how to solve and estimate a continuous-time dynamic stochastic general equilibrium (DSGE) model with jumps. It also shows that a continuous-time formulation can make it simpler (relative to its discrete-time version) to compute and estimate the deep parameters using the likelihoo...

Lone ranger decision making versus consensus decision making: Descriptive analysis

OpenAIRE

Maite Sara Mashego

2015-01-01

Consensus decision making, concerns group members make decisions together with the requirement of reaching a consensus that is all members abiding by the decision outcome. Lone ranging worked for sometime in a autocratic environment. Researchers are now pointing to consensus decision-making in organizations bringing dividend to many organizations. This article used a descriptive analysis to compare the goodness of consensus decision making and making lone ranging decision management. This art...

Muscle mechanics and neuromuscular control

NARCIS (Netherlands)

Hof, AL

The purpose of this paper is to demonstrate that the properties of the mechanical system, especially muscle elasticity and limb mass, to a large degree determine force output and movement. This makes the control demands of the central nervous system simpler and more robust. In human triceps surae, a

Three-body interactions in many-body effective field theory

International Nuclear Information System (INIS)

Furnstahl, R.J.

2004-01-01

This contribution is an advertisement for applying effective field theory (EFT) to many-body problems, including nuclei and cold atomic gases. Examples involving three-body interactions are used to illustrate how EFT's quantify and systematically eliminate model dependence, and how they make many-body calculations simpler and more powerful

Making detailed predictions makes (some) predictions worse

Science.gov (United States)

Kelly, Theresa F.

In this paper, we investigate whether making detailed predictions about an event makes other predictions worse. Across 19 experiments, 10,895 participants, and 415,960 predictions about 724 professional sports games, we find that people who made detailed predictions about sporting events (e.g., how many hits each baseball team would get) made worse predictions about more general outcomes (e.g., which team would win). We rule out that this effect is caused by inattention or fatigue, thinking too hard, or a differential reliance on holistic information about the teams. Instead, we find that thinking about game-relevant details before predicting winning teams causes people to give less weight to predictive information, presumably because predicting details makes information that is relatively useless for predicting the winning team more readily accessible in memory and therefore incorporated into forecasts. Furthermore, we show that this differential use of information can be used to predict what kinds of games will and will not be susceptible to the negative effect of making detailed predictions.

What's special about human technology?

OpenAIRE

Robert Aunger

2010-01-01

Human technology is difficult to understand because it is so complex. However, human technology evolved from the simpler technologies of other species. Comparison with these other technologies should illuminate why human technology is distinct. Some birds and primates make tools, or simple technological objects whose function is closely related to their form. Humans, on the other hand, make machines--relatively complex objects whose functionality derives from the interaction of parts with res...

Top of the food chain: Product services in the food industry

OpenAIRE

Dixon, Andrew M.; Simon, Matthew

2001-01-01

This paper aims to describe the environmental impact of the food industry supply chain and explore the potential for new product-service systems in the food sector, which has not been subject to a great deal of eco-design research. Data from a cross-sector analysis of UK industry, concentrating on the sectors representing the food industry supply chain, is utilised. These sectors are agriculture, food processing, retailing, food services, and kitchen equipment. The analysis combines economic ...

Revisiting classical design in engineering from a perspective of frugality

Directory of Open Access Journals (Sweden)

Balkrishna C. Rao

2017-05-01

Full Text Available The conservative nature of design in engineering has typically unleashed products fabricated with generous amounts of raw materials. This is epitomized by the factor of safety whose values higher than unity suggests various uncertainties of design that are tackled through material padding. This effort proposes a new factor of safety called the factor of frugality that could be used in ecodesign and which addresses both rigors of the classical design process and quantification of savings in materials going into a product. An example of frugal shaft design together with some other cases has been presented to explain the working of the factor of frugality. Adoption of the frugality factor would entail a change in design philosophy whereby designers would constantly make avail of a rigorous design process coupled with material-saving schemes for realizing products that are benign to the environment. Such a change in the foundations of design would abet the stewardship of earth in avoiding planetary boundaries since engineering influences a significant proportion of human endeavors. Keywords: Safety engineering, Mechanical engineering

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling.

Science.gov (United States)

Martinho, Graça; Pires, Ana; Saraiva, Luanha; Ribeiro, Rita

2012-06-01

This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile-butadiene-styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production. Copyright © 2012 Elsevier Ltd. All rights reserved.

How to reduce emissions related to consumption: which public policies?

International Nuclear Information System (INIS)

Fink, Meike; Gautier, Celia

2014-05-01

This report proposes an assessment of greenhouse gas emissions related to consumption in the world. It examines which are currently the world emission flows which come with trade exchanges (intermediate and final goods) between countries. The first part tries to highlight hidden emissions present in our imports and exports. It presents the different methods of greenhouse gas accounting, discusses the emission flows at the planet level, and the challenge of the limitation of 'carbon leaks', and discusses what makes a country a net emission importer or exporter. The second part discusses how France can reduce its consumption-based emissions, how to reach a factor 4 of reduction on these emissions, how to act against leaks and inflows of emissions through measures at the world level (international agreement, reduction of emissions by sea and air transport, reduction of industry emissions) or at the national level (relocation of polluting industries in France or Europe, promotion of short circuits, eco-design, changes in consumption modes, measures on groups of products which import emissions)

Medical decision making

NARCIS (Netherlands)

Stiggelbout, A.M.; Vries, M. de; Scherer, L.; Keren, G.; Wu, G.

2016-01-01

This chapter presents an overview of the field of medical decision making. It distinguishes the levels of decision making seen in health-care practice and shows how research in judgment and decision making support or improve decision making. Most of the research has been done at the micro level,

Steel making

CERN Document Server

Chakrabarti, A K

2014-01-01

"Steel Making" is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. This book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject.Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to: elaborate the physiochemical principles involved in steel making; explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process); provide a summary of the developments in secondary refining of steels; discuss principles a...

Estimating minimum and maximum air temperature using MODIS ...

Indian Academy of Sciences (India)

in a wide range of applications in areas of ecology, hydrology ... stations, thus attracting researchers to make use ... simpler because of the lack of solar radiation effect .... water from the snow packed Himalayan region to ... tribution System (LAADS) webdata archive cen- ..... ing due to greenhouse gases is different for the air.

Cognitive costs of decision-making strategies: A resource demand decomposition analysis with a cognitive architecture.

Science.gov (United States)

Fechner, Hanna B; Schooler, Lael J; Pachur, Thorsten

2018-01-01

Several theories of cognition distinguish between strategies that differ in the mental effort that their use requires. But how can the effort-or cognitive costs-associated with a strategy be conceptualized and measured? We propose an approach that decomposes the effort a strategy requires into the time costs associated with the demands for using specific cognitive resources. We refer to this approach as resource demand decomposition analysis (RDDA) and instantiate it in the cognitive architecture Adaptive Control of Thought-Rational (ACT-R). ACT-R provides the means to develop computer simulations of the strategies. These simulations take into account how strategies interact with quantitative implementations of cognitive resources and incorporate the possibility of parallel processing. Using this approach, we quantified, decomposed, and compared the time costs of two prominent strategies for decision making, take-the-best and tallying. Because take-the-best often ignores information and foregoes information integration, it has been considered simpler than strategies like tallying. However, in both ACT-R simulations and an empirical study we found that under increasing cognitive demands the response times (i.e., time costs) of take-the-best sometimes exceeded those of tallying. The RDDA suggested that this pattern is driven by greater requirements for working memory updates, memory retrievals, and the coordination of mental actions when using take-the-best compared to tallying. The results illustrate that assessing the relative simplicity of strategies requires consideration of the overall cognitive system in which the strategies are embedded. Copyright © 2017 Elsevier B.V. All rights reserved.

Model : making

OpenAIRE

Bottle, Neil

2013-01-01

The Model : making exhibition was curated by Brian Kennedy in collaboration with Allies & Morrison in September 2013. For the London Design Festival, the Model : making exhibition looked at the increased use of new technologies by both craft-makers and architectural model makers. In both practices traditional ways of making by hand are increasingly being combined with the latest technologies of digital imaging, laser cutting, CNC machining and 3D printing. This exhibition focussed on ...

Business making decisions

Directory of Open Access Journals (Sweden)

Enrique Benjamín Franklin Fincowsky

2011-06-01

Full Text Available People and organizations make better or get wrong as consequence of making decisions. Sometimes making decisions is just a trial and error process. Some others, decisions are good and the results profitable with a few of mistakes, most of the time because it’s considered the experience and the control of a specific field or the good intention of who makes them. Actually, all kinds of decisions bring learning. What is important is the intention, the attitude and the values considered in this process. People from different scenes face many facts and circumstances—almost always out of control—that affect the making decisions process. There is not a unique way to make decisions for all companies in many settings. The person who makes a decision should identify the problem, to solve it later using alternatives and solutions. Even though, follow all the steps it’s not easy as it seems. Looking back the conditions related to the decisions, we can mention the followings: uncertainty, risk and certainty. When people identify circumstances and facts, as well as its effects in a possible situation, they will make decisions with certainty. As long as the information decreases and it becomes ambiguous the risk becomes an important factor in the making decisions process because they are connected to probable objectives (clear or subjective (opinion judgment or intuition. To finish, uncertainty, involves people that make a decision with no or little information about circumstances or criteria with basis

Current and Future Environmental Balance of Small-Scale Run-of-River Hydropower.

Science.gov (United States)

Gallagher, John; Styles, David; McNabola, Aonghus; Williams, A Prysor

2015-05-19

Globally, the hydropower (HP) sector has significant potential to increase its capacity by 2050. This study quantifies the energy and resource demands of small-scale HP projects and presents methods to reduce associated environmental impacts based on potential growth in the sector. The environmental burdens of three (50-650 kW) run-of-river HP projects were calculated using life cycle assessment (LCA). The global warming potential (GWP) for the projects to generate electricity ranged from 5.5-8.9 g CO2 eq/kWh, compared with 403 g CO2 eq/kWh for UK marginal grid electricity. A sensitivity analysis accounted for alternative manufacturing processes, transportation, ecodesign considerations, and extended project lifespan. These findings were extrapolated for technically viable HP sites in Europe, with the potential to generate 7.35 TWh and offset over 2.96 Mt of CO2 from grid electricity per annum. Incorporation of ecodesign could provide resource savings for these HP projects: avoiding 800 000 tonnes of concrete, 10 000 tonnes of steel, and 65 million vehicle miles. Small additional material and energy contributions can double a HP system lifespan, providing 39-47% reductions for all environmental impact categories. In a world of finite resources, this paper highlights the importance of HP as a resource-efficient, renewable energy system.

Comment on "Differential sensitivity to human communication in dogs, wolves, and human infants".

Science.gov (United States)

Marshall-Pescini, S; Passalacqua, C; Valsecchi, P; Prato-Previde, E

2010-07-09

Topál et al. (Reports, 4 September 2009, p. 1269) showed that dogs, like infants but unlike wolves, make perseverative search errors that can be explained by the use of ostensive cues from the experimenter. We suggest that a simpler learning process, local enhancement, can account for errors made by dogs.

Decision Making

Directory of Open Access Journals (Sweden)

Pier Luigi Baldi

2006-06-01

Full Text Available This article points out some conditions which significantly exert an influence upon decision and compares decision making and problem solving as interconnected processes. Some strategies of decision making are also examined.

A Safer, Simpler, Classic Intrafascial Supracervical Hysterectomy Technique

OpenAIRE

Kim, Dong Ho; Lee, Eun Sil; Park, Sung Dae

2005-01-01

Objectives: Our aim is to introduce the technical aspects and advantages of a new classic intrafascial supracervical hysterectomy (CISH) technique over the conventional technique. Methods: We performed a retrospective evaluation (Canadian Task Force classification II-2) of 200 women who underwent conventional CISH technique (100 cases), between March 2000 and September 2000, or the new CISH technique (100 cases) between May 2002 and November 2002. The charts of these 200 women were reviewed r...

Civilian duodenal gunshot wounds: surgical management made simpler.

Science.gov (United States)

Talving, Peep; Nicol, Andrew J; Navsaria, Pradeep H

2006-04-01

Low-velocity gunshot wounds cause most civilian duodenal injuries. The objective of this study was to describe a simplified surgical algorithm currently in use in a South African civilian trauma center and to verify its validity by measuring morbidity and mortality. A retrospective chart review of patients with duodenal gunshot injuries during the study period January 1999 to December 2003 was performed. Data points accrued included patient demographics, admission hemodynamic status and resuscitative measures, laparotomy damage control procedures, methods of surgical repair of the duodenal injury, associated injuries, length of intensive care and hospital stays, complications, and mortality. A total of 75 consecutive patients with gunshot injuries to the duodenum were reviewed. Primary repair was performed in 54 patients (87%), resection and reanastomosis in 7 (11%), and pancreatoduodenectomy in 1 (2%) during the initial phases. The overall morbidity and mortality were 58% and 28%, respectively. Duodenum-related complications were recorded in nine (15%) patients: two duodenal fistulas, one duodenal obstruction, and six cases of suture-line dehiscence. Overall and duodenum-related morbidity rates in patients with combined pancreatoduodenal injuries were 83% and 17%, respectively. Duodenum-related mortality occurred in three (4.8%) patients. Most civilian low-velocity duodenal gunshot injuries treated with simple primary repair result in overall morbidity, mortality, and duodenum-related complication rates comparable to those in reports where more complex surgical procedures were employed. Primary repair is also applicable for most combined pancreatic and duodenal gunshot injuries.

Aiming for a simpler early arthritis MRI protocol

DEFF Research Database (Denmark)

Stomp, Wouter; Krabben, Annemarie; van der Heijde, Désirée

2015-01-01

PURPOSE: To evaluate whether intravenous gadolinium (Gd) contrast administration can be eliminated when evaluating synovitis and tenosynovitis in early arthritis patients, thereby decreasing imaging time, cost, and invasiveness. MATERIALS AND METHODS: Wrist MRIs of 93 early arthritis patients wer...

Shared decision making

Science.gov (United States)

... page: //medlineplus.gov/ency/patientinstructions/000877.htm Shared decision making To use the sharing features on this page, ... treatment you both support. When to use Shared Decision Making Shared decision making is often used when you ...

Leading product-related environmental performance indicators: a selection guide and database

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

Make Sense?

DEFF Research Database (Denmark)

Gyrd-Jones, Richard; Törmälä, Minna

Purpose: An important part of how we sense a brand is how we make sense of a brand. Sense-making is naturally strongly connected to how we cognize about the brand. But sense-making is concerned with multiple forms of knowledge that arise from our interpretation of the brand-related stimuli......: Declarative, episodic, procedural and sensory. Knowledge is given meaning through mental association (Keller, 1993) and / or symbolic interaction (Blumer, 1969). These meanings are centrally related to individuals’ sense of identity or “identity needs” (Wallpach & Woodside, 2009). The way individuals make...... sense of brands is related to who people think they are in their context and this shapes what they enact and how they interpret the brand (Currie & Brown, 2003; Weick, Sutcliffe, & Obstfeld, 2005; Weick, 1993). Our subject of interest in this paper is how stakeholders interpret and ascribe meaning...

Beyond (eco)design : Current approaches to sustainable packaging design

NARCIS (Netherlands)

Wever, R.

2014-01-01

Packaging has always received a lot of attention within the field of design for sustainability. The classical approach has been to mainly focus on reducing the impact of the packaging. This approach stems from the ill-informed position that packaging is superfluous, or at best there only for

Structure for Categorization of EcoDesign Methods and Tools

OpenAIRE

Lindahl, Mattias; Ekermann, Sara

2013-01-01

This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing,

Framework for measuring the sustainability performance of ecodesign implementation

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

Companies and academic studies are consistently reporting several potential business benefits gained fromecodesign implementation, such as increased innovation potential, development of new markets and business models, reduction in environmental liability, risks and costs, improvement of organiza......Companies and academic studies are consistently reporting several potential business benefits gained fromecodesign implementation, such as increased innovation potential, development of new markets and business models, reduction in environmental liability, risks and costs, improvement......, in alignment with corporate sustainability strategy and main drivers....

Handbook on Decision Making Vol 2 Risk Management in Decision Making

CERN Document Server

Lu, Jie; Zhang, Guangquan

2012-01-01

This book presents innovative theories, methodologies, and techniques in the field of risk management and decision making. It introduces new research developments and provides a comprehensive image of their potential applications to readers interested in the area. The collection includes: computational intelligence applications in decision making, multi-criteria decision making under risk, risk modelling,forecasting and evaluation, public security and community safety, risk management in supply chain and other business decision making, political risk management and disaster response systems. The book is directed to academic and applied researchers working on risk management, decision making, and management information systems.

Making ethical choices: a comprehensive decision-making model for Canadian psychologists.

Science.gov (United States)

Hadjistavropoulos, T; Malloy, D C

2000-05-01

This paper proposes a theoretical augmentation of the seven-step decision-making model outlined in the Canadian Code of Ethics for Psychologists. We propose that teleological, deontological, and existential ethical perspectives should be taken into account in the decision-making process. We also consider the influence of individual, issue-specific, significant-other, situational, and external factors on ethical decision-making. This theoretical analysis demonstrates the richness and complexity of ethical decision-making.

Make up your mind - How stress and sex affect decision-making

NARCIS (Netherlands)

Koot, S.

2013-01-01

Decision-making refers to assessing costs and benefits of competing actions, with either a known outcome or an uncertain result. Decision-making depends on several abilities, such as behavioural flexibility and inhibiting risky responses. Several factors affect decision-making, causing differences

What sense can the sense-making perspective make for economics?

Science.gov (United States)

Cortés, Mauricio; Londoño, Sandra

2009-06-01

A landscape of interdisciplinary decision theories is sketched with a tentative place for the sense-making approach presented by Salvatore et al (2009). Uncertainty and ambiguity are highlighted as key concepts in both, economics and sense-making perspectives aligning possible and useful conceptual coincidences among post Keynesian economics (Shackle 1974; Davidson 2005) cultural psychology (Salvatore et al. 2009) and organization theory (March 1978, 1994; Weick 1995). Few ideas for the construction of possible research agenda aimed to build a complex model of decision making are suggested. Finally a brief reflection on the study of underground economy is presented. The challenge for the link between psychology and economics is to figure out a descriptive general model of the process of decision making, perhaps by combining weighted elements of the different ways in which human rationality emerges--calculation, rule following, sense-making--for explaining singular and specific decisions.

Electronic Commerce "in the dark"

Science.gov (United States)

Buzzi, Maria Claudia; Buzzi, Marina; Leporini, Barbara; Senette, Caterina

The widespread diffusion of electronic commerce offers a great opportunity for blind people. We describe the results of an electronic survey carried out with 22 blind and 22 sighted users in order to understand the difficulties and obstacles they experience shopping on-line, and solicit their expectations and suggestions for making the interaction simpler and more satisfying. Results show that blind users shop on-line much less than their sighted counterparts, since they encounter more difficulties not only when making a purchase, but even in the navigation phase preceding the commercial transaction. Complex layouts and unstructured content can prevent an e-transaction from being successfully completed. Furthermore, security, privacy and trustiness, common concerns for all consumers, also impact on the fear of buying via Internet for the visually impaired. Poor usability leads to a potential loss of revenue for on-line companies and a lost opportunity to increase a blind person's independence. Providing simpler, more understandable UIs would benefit all users and fuel the expansion of electronic commerce.

The naked spinor a rewrite of Clifford algebra

CERN Document Server

Morris, Dennis

2015-01-01

This book is about spinors. The whole mathematical theory of spinors is within Clifford algebra, and so this book is about Clifford algebra. Spinor theory is really the theory of empty space, and so this book is about empty space. The whole of Clifford algebra is rewritten in a much simpler form, and so the whole of spinor theory is rewritten in a much simpler form. Not only does this book make Clifford algebra simple and obvious, but it lifts the fog and mirrors from this area of mathematics to make it clear and obvious. In doing so, the true nature of spinors is revealed to the reader, and, with that, the true nature of empty space. To understand this book you will need an elementary knowledge of linear algebra (matrices) an elementary knowledge of finite groups and an elementary knowledge of the complex numbers. From no more than that, you will gain a very deep understanding of Clifford algebra, spinors, and empty space. The book is well written with all the mathematical steps laid before the reader in a w...

Elements of Making

Science.gov (United States)

Rodriguez, Shelly; Harron, Jason; Fletcher, Steven; Spock, Hannah

2018-01-01

While there is no official definition, making is generally thought of as turning ideas into products through design, invention, and building. Support is growing for integrating making into science, technology, engineering, and mathematics (STEM) education. Making can help high school students explore science concepts and phenomena, yet, lacking…

Flexible lot sizing in hybrid make-to-order/make-to-stock production planning

NARCIS (Netherlands)

Beemsterboer, Bart; Land, Martin; Teunter, Ruud

2017-01-01

Hybrid make-to-order/make-to-stock production systems are difficult to control. Batch production of make-to-stock products allows for efficient capacity usage, but fixed batch sizes can make the system less responsive to make-to-order customers. Using Markov Decision Process modeling, we show that

Peptide motifs of the single dominantly expressed class I molecule explain the striking MHC-determined response to Rous sarcoma virus in chickens

DEFF Research Database (Denmark)

Wallny, Hans-Joachim; Avila, David; Hunt, Lawrence G.

2006-01-01

Compared with the MHC of typical mammals, the chicken MHC is smaller and simpler, with only two class I genes found in the B12 haplotype. We make five points to show that there is a single-dominantly expressed class I molecule that can have a strong effect on MHC function. First, we find only one...

Making sense of adolescent decision-making: challenge and reality.

Science.gov (United States)

Unguru, Yoram

2011-08-01

Few topics in pediatric bioethics are as vexing as decision-making. Decision-making in pediatrics presents challenges for children, parents, and physicians alike. The related, yet distinct, concepts of assent and consent are central to pediatric decision-making. Although informed consent is largely regarded as a worthwhile adult principle, assent has been, and continues to be, mired in debate. Controversial subjects include a meaningful definition of assent; how old children should be to assent; who should be included in the assent process; parental permission; how to resolve disputes between children and their parents; the relationship between assent and consent; the quantity and quality of information to disclose to children and their families; how much and what information children desire and need; the necessity and methods for assessing both children's understanding of disclosed information and of the assent process itself; reconciling ethical and legal attitudes toward assent; and finally, an effective, practical, and realistically applicable decision-making model.

The Orthogonally Partitioned EM Algorithm: Extending the EM Algorithm for Algorithmic Stability and Bias Correction Due to Imperfect Data.

Science.gov (United States)

Regier, Michael D; Moodie, Erica E M

2016-05-01

We propose an extension of the EM algorithm that exploits the common assumption of unique parameterization, corrects for biases due to missing data and measurement error, converges for the specified model when standard implementation of the EM algorithm has a low probability of convergence, and reduces a potentially complex algorithm into a sequence of smaller, simpler, self-contained EM algorithms. We use the theory surrounding the EM algorithm to derive the theoretical results of our proposal, showing that an optimal solution over the parameter space is obtained. A simulation study is used to explore the finite sample properties of the proposed extension when there is missing data and measurement error. We observe that partitioning the EM algorithm into simpler steps may provide better bias reduction in the estimation of model parameters. The ability to breakdown a complicated problem in to a series of simpler, more accessible problems will permit a broader implementation of the EM algorithm, permit the use of software packages that now implement and/or automate the EM algorithm, and make the EM algorithm more accessible to a wider and more general audience.

I: Making Art

Science.gov (United States)

Rosenfeld, Malke; Johnson, Marquetta; Plemons, Anna; Makol, Suzanne; Zanskas, Meghan; Dzula, Mark; Mahoney, Meg Robson

2014-01-01

Writing about the teaching artist practice should mean writing about art making. As both teacher and artist, the authors are required to be cognizant of their own art-making processes, both how it works and why it is important to them, in order to make this process visible to their students. They also need the same skills to write about how and…

BioMake: a GNU make-compatible utility for declarative workflow management.

Science.gov (United States)

Holmes, Ian H; Mungall, Christopher J

2017-11-01

The Unix 'make' program is widely used in bioinformatics pipelines, but suffers from problems that limit its application to large analysis datasets. These include reliance on file modification times to determine whether a target is stale, lack of support for parallel execution on clusters, and restricted flexibility to extend the underlying logic program. We present BioMake, a make-like utility that is compatible with most features of GNU Make and adds support for popular cluster-based job-queue engines, MD5 signatures as an alternative to timestamps, and logic programming extensions in Prolog. BioMake is available for MacOSX and Linux systems from https://github.com/evoldoers/biomake under the BSD3 license. The only dependency is SWI-Prolog (version 7), available from http://www.swi-prolog.org/. ihholmes + biomake@gmail.com or cmungall + biomake@gmail.com. Feature table comparing BioMake to similar tools. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Decision Making and Cancer

OpenAIRE

Reyna, Valerie F.; Nelson, Wendy L.; Han, Paul K.; Pignone, Michael P.

2015-01-01

We review decision-making along the cancer continuum in the contemporary context of informed and shared decision making, in which patients are encouraged to take a more active role in their health care. We discuss challenges to achieving informed and shared decision making, including cognitive limitations and emotional factors, but argue that understanding the mechanisms of decision making offers hope for improving decision support. Theoretical approaches to decision making that explain cogni...

Categorization = Decision Making + Generalization

Science.gov (United States)

Seger, Carol A; Peterson, Erik J.

2013-01-01

We rarely, if ever, repeatedly encounter exactly the same situation. This makes generalization crucial for real world decision making. We argue that categorization, the study of generalizable representations, is a type of decision making, and that categorization learning research would benefit from approaches developed to study the neuroscience of decision making. Similarly, methods developed to examine generalization and learning within the field of categorization may enhance decision making research. We first discuss perceptual information processing and integration, with an emphasis on accumulator models. We then examine learning the value of different decision making choices via experience, emphasizing reinforcement learning modeling approaches. Next we discuss how value is combined with other factors in decision making, emphasizing the effects of uncertainty. Finally, we describe how a final decision is selected via thresholding processes implemented by the basal ganglia and related regions. We also consider how memory related functions in the hippocampus may be integrated with decision making mechanisms and contribute to categorization. PMID:23548891

Cluster Based Text Classification Model

DEFF Research Database (Denmark)

Nizamani, Sarwat; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

We propose a cluster based classification model for suspicious email detection and other text classification tasks. The text classification tasks comprise many training examples that require a complex classification model. Using clusters for classification makes the model simpler and increases...... the accuracy at the same time. The test example is classified using simpler and smaller model. The training examples in a particular cluster share the common vocabulary. At the time of clustering, we do not take into account the labels of the training examples. After the clusters have been created......, the classifier is trained on each cluster having reduced dimensionality and less number of examples. The experimental results show that the proposed model outperforms the existing classification models for the task of suspicious email detection and topic categorization on the Reuters-21578 and 20 Newsgroups...

Make or buy strategy decision making in supply quality chain

Directory of Open Access Journals (Sweden)

Seyed Mohammad Seyedhosseini

2012-04-01

Full Text Available Minimizing the total cost is absolutely the goal of each supply chain, which is most of the time pursued. In this regards, quality related costs that have significant roles are sometimes neglected. Selecting suppliers, which supply relatively high quality raw materials in a lower cost is considered as a strategic decision. Make or Buy decision can be also noticed in supplier selection process. In this paper, the supply strategy: Make or Buy decision (SS: MOB is studied in order to find which strategy (Make or Buy should be chosen to minimize the total costs of supply chain. Therefore, two separate models are generated for each strategy and several examples are solved for the respective models. Computational experiments show the efficiency of the proposed models for making decision about selecting the best strategy.

Make2Learn: Fostering Engagement and Creativity in Learning through Making

DEFF Research Database (Denmark)

Giannakos, Michail N.; Divitini, Monica; Iversen, Ole Sejer

2015-01-01

by research- ers to introduce making principles to young students. Making principles enable them foster co-creativity and joy in learning processes and construct knowledge. By involving students in the design decisions they begin to develop technological fluency and the needed competences, in a joyful way....... Make2Learn aims to bring together international researchers, educators, designers, and makers for the ex- ploration of making principles towards the acquisition of 21st Century learning competences, by employing the state art aspects of entertainment technologies, new media, gaming, robotics, toys...... and applications. The main objective is to build a research community around this topical area. In particular, Make2Learn aims to develop a critical discussion about the well-established practices and en- tertainment technologies of the maker movement, and expected outcomes of put- ting them into practice under...

THE MAKING OF DECISION MAKING

Directory of Open Access Journals (Sweden)

Leonardo Yuji Tamura

2016-04-01

Full Text Available Quantum Electronics was a Brazilian startup in the 1990's that was acquired by an American equity fund in 2012. They are currently the largest manufacturer of vehicle tracking and infotainment systems. The company was founded by three college friends, who are currently executives at the company: Camilo Santos, Pedro Barbosa and Luana Correa. Edward Hutter was sent by the equity fund to take over the company’s finances, but is having trouble making organizational decisions with his colleagues. As a consultant, I was called to help them improve their decision making process and project prioritization. I adapted and deployed our firm's methodology, but, in the end, its adequacy is shown to be very much in question. The author of this case study intends to explore how actual organizational decisions rely on different decision models and their assumptions, .as well as demonstrate that a decision model is neither absolutely good nor bad as its quality is context dependent.

Making the Connection between Environmental Science and Decision Making

Science.gov (United States)

Woodhouse, C. A.; Crimmins, M.; Ferguson, D. B.; Garfin, G. M.; Scott, C. A.

2011-12-01

As society is confronted with population growth, limited resources, and the impacts of climate variability and change, it is vital that institutions of higher education promote the development of professionals who can work with decision-makers to incorporate scientific information into environmental planning and management. Skills for the communication of science are essential, but equally important is the ability to understand decision-making contexts and engage with resource managers and policy makers. It is increasingly being recognized that people who understand the linkages between science and decision making are crucial if science is to better support planning and policy. A new graduate-level seminar, "Making the Connection between Environmental Science and Decision Making," is a core course for a new post-baccalaureate certificate program, Connecting Environmental Science and Decision Making at the University of Arizona. The goal of the course is to provide students with a basic understanding of the dynamics between scientists and decision makers that result in scientific information being incorporated into environmental planning, policy, and management decisions. Through readings from the environmental and social sciences, policy, and planning literature, the course explores concepts including scientific information supply and demand, boundary organizations, co-production of knowledge, platforms for engagement, and knowledge networks. Visiting speakers help students understand some of the challenges of incorporating scientific information into planning and decision making within institutional and political contexts. The course also includes practical aspects of two-way communication via written, oral, and graphical presentations as well as through the interview process to facilitate the transfer of scientific information to decision makers as well as to broader audiences. We aspire to help students develop techniques that improve communication and

Individual decision making, group decision making and deliberation

Directory of Open Access Journals (Sweden)

Radovanović Bojana

2012-01-01

Full Text Available Each of us makes a number of decisions, from the less important to those with far-reaching consequences. As members of different groups, we are also actors of group decision making. In order to make a rational decision, a choice-making procedure must satisfy a number of assumptions (conditions of rationality. In addition, when it comes to group decisions, those procedures should also be “fair.” However, it is not possible to define a procedure of choice-making that would transform individual orders of alternatives based on preferences of perfectly rational individuals into a single social order and still meet conditions of rationality and ethics. The theory of deliberative democracy appeared in response to the impossibility of Social Choice theory. The basic assumption of deliberative democracy is that individuals adjust their preferences taking into account interests of the community. They are open for discussion with other group members and are willing to change their attitudes in order to achieve common interests. Ideally, group members come to an agreement during public discussion (deliberation. Still, this concept cannot completely over­come all the difficulties posed by the theory of social choice. Specifically, there is no solution for strategic and manipulative behavior of individuals. Also, the concept of deliberative democracy faces certain problems particular to this approach, such as, to name but a few, problems with the establishment of equality of participants in the debate and their motivation, as well as problems with the organization of public hearings. [Projekat Ministarstva nauke Republike Srbije, br. 47009: Evropske integracije i društveno-ekonomske promene privrede Srbije na putu ka EU i br. 179015: Izazovi i perspektive strukturnih promena u Srbiji: Strateški pravci ekonomskog razvoja i usklađivanje sa zahtevima EU

Application of photonics in next generation telecommunication satellites payloads

Science.gov (United States)

Anzalchi, J.; Inigo, P.; Roy, B.

2017-11-01

Next generation broadband telecommunication satellites are required to provide very high data throughput using complex multibeam architectures. These high throughput `Terabit/s' Satellites will incorporate payloads with very large quantity of conventional RF equipment, co-axial cables, waveguides, harnesses and ancillary equipment, making the Assembly, Integration and Test (AIT) very complex. Use of `RF over Fiber' and associated photonics equipment can make the process of AIT much simpler with the added benefit of significant reduction in number of payload equipment and inherent payload mass.

A Graphical User Interface for the Computational Fluid Dynamics Software OpenFOAM

OpenAIRE

Melbø, Henrik Kaald

2014-01-01

A graphical user interface for the computational fluid dynamics software OpenFOAM has been constructed. OpenFOAM is a open source and powerful numerical software, but has much to be wanted in the field of user friendliness. In this thesis the basic operation of OpenFOAM will be introduced and the thesis will emerge in a graphical user interface written in PyQt. The graphical user interface will make the use of OpenFOAM simpler, and hopefully make this powerful tool more available for the gene...

Mechatronics by Analogy and Application to Legged Locomotion

Science.gov (United States)

Ragusila, Victor

A new design methodology for mechatronic systems, dubbed as Mechatronics by Analogy (MbA), is introduced and applied to designing a leg mechanism. The new methodology argues that by establishing a similarity relation between a complex system and a number of simpler models it is possible to design the former using the analysis and synthesis means developed for the latter. The methodology provides a framework for concurrent engineering of complex systems while maintaining the transparency of the system behaviour through making formal analogies between the system and those with more tractable dynamics. The application of the MbA methodology to the design of a monopod robot leg, called the Linkage Leg, is also studied. A series of simulations show that the dynamic behaviour of the Linkage Leg is similar to that of a combination of a double pendulum and a spring-loaded inverted pendulum, based on which the system kinematic, dynamic, and control parameters can be designed concurrently. The first stage of Mechatronics by Analogy is a method of extracting significant features of system dynamics through simpler models. The goal is to determine a set of simpler mechanisms with similar dynamic behaviour to that of the original system in various phases of its motion. A modular bond-graph representation of the system is determined, and subsequently simplified using two simplification algorithms. The first algorithm determines the relevant dynamic elements of the system for each phase of motion, and the second algorithm finds the simple mechanism described by the remaining dynamic elements. In addition to greatly simplifying the controller for the system, using simpler mechanisms with similar behaviour provides a greater insight into the dynamics of the system. This is seen in the second stage of the new methodology, which concurrently optimizes the simpler mechanisms together with a control system based on their dynamics. Once the optimal configuration of the simpler system is

Making Media Studies

Directory of Open Access Journals (Sweden)

David Gauntlett

2015-12-01

Full Text Available This podcast is a recording of a research seminar that took place on December 3, 2015, at the University of Westminster's Communication and Media Research Institute (CAMRI. In this contribution, David Gauntlett discusses his new book, Making Media Studies, and other new work. In Making Media Studies (Peter Lang, 2015, Gauntlett proposes a vision of media studies based around doing and making – not about the acquisition of skills, as such, but an experience of building knowledge and understanding through creative hands-on engagement with all kinds of media. Gauntlett suggests that media studies scholars have failed to recognise the significance of everyday creativity – the vital drive of people to make, exchange, and learn together, supported by online networks. He argues that we should think about media in terms of conversations, inspirations, and making things happen. Media studies can be about genuine social change, he suggests, if we recognise the significance of everyday creativity, work to transform our tools, and learn to use them wisely. David Gauntlett is a Professor in the School of Media, Arts and Design at the University of Westminster, where he is also the School's Co-Director of Research. He is the author of several books, including: Creative Explorations (2007, Media, Gender and Identity: An Introduction (2nd edition 2008, Making is Connecting (2011, and Making Media Studies (2015. He has made a number of popular online resources, videos and playthings, and has pioneered creative research and workshop methods. He is external examiner for Information Experience Design at the Royal College of Art, London.

Integrating make-to-order and make-to-stock in job shop control

NARCIS (Netherlands)

Beemsterboer, Bart; Land, Martin; Teunter, Ruud; Bokhorst, Jos

2017-01-01

Demand fluctuations in make-to-order job shops lead to utilisation fluctuations and delivery delays, particularly in periods with high demand. Many job shop production companies therefore include some standardised products in their product mix and use a hybrid make-to-order/ make-to-stock production

Making and Changing Wills

Directory of Open Access Journals (Sweden)

Cheryl Tilse

2016-02-01

Full Text Available Wills are important social, economic, and legal documents. Yet little is known about current will making practices and intentions. A comprehensive national database on the prevalence of will making in Australia was developed to identify who is or is not most likely to draw up a will and triggers for making and changing wills. A national survey of 2,405 adults aged above 18 years was administered by telephone in August and September 2012. Fifty-nine percent of the Australian adult population has a valid will, and the likelihood of will making increases with age and estate value. Efforts to get organized, especially in combination with life stage and asset changes trigger will making; procrastination, rather than a strong resistance, appears to explain not making a will. Understanding will making is timely in the context of predicted significant intergenerational transfers of wealth, changing demographics, and a renewed emphasis on retirement planning.

What should a 'good' model of the NPP operator contain

International Nuclear Information System (INIS)

Bainbridge, L.

1986-01-01

Much of human factors design is done without reference to models. A 'scientific' cognitive model contains multi-level goal-oriented top-down processing, in which behaviour choice depends on working memory, mental and environmental constraints, and expected results. Simpler models are more practical for supporting 0 behaviour, or predicting performance limits. Many types of reason make numerical predictions of cognitive behaviour non trivial

Digital holographic amplification of interferograms in the Michelson interferometer using the phase-only LCOS modulator

Science.gov (United States)

Balbekin, Nikolay; Petrov, Nikolay; Pul'kin, Sergey; Shoev, Vladislav; Sevryugin, Alexander; Tursunov, Ibrohim; Venediktov, Dmitrii; Venediktov, Vladimir

2017-10-01

The method of amplification of hologram was applied to the so-called Rozhdestvenskiy hooks, that were obtained in the Rozhdestvenskiy interferometer (Michelson interferometer, combined with a grating spectrograph). In such a device the absorption lines reveal themselves as specific "hooks", whose curvature provides the information about the atomic oscillator force. The holographic amplification "smoothes" the hooks and thus makes their analysis much simpler.

Environmental assessment of end-of-life textiles in Denmark

DEFF Research Database (Denmark)

Koligkioni, Athina; Parajuly, Keshav; Sørensen, Birgitte Lilholt

2018-01-01

The European Union is on its way to a circular economy through eco-design, waste prevention, reuse and recycling of products and materials. This study analyzes the environmental effects of end-of-life textile management in Denmark. First, a Mass Flow Analysis was performed for textile flows from...... sales to consumers to end processes, which revealed that absolute consumption has grown significantly over the last years. Data on generation and management of used textiles indicated that around 40% are discarded with residual waste, another 40% are captured by collection for reuse channels, and around...

Design of rotating electrical machines

CERN Document Server

Pyrhonen , Juha; Hrabovcova , Valeria

2013-01-01

In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machinesAn expanded section on the design of permanent magnet synchronous machines, now repo

Biomass stoves in dwellings

DEFF Research Database (Denmark)

Luis Teles de Carvalho, Ricardo

and analyzed in this session. Experimental results regarding the performance of biomass combustion stoves and the effects of real-life practices in terms of thermal efficiency, particulate and gaseous emissions will be addressed. This research is based on the development of a new testing approach that combines...... laboratory and field measurements established in the context of the implications of the upcoming eco-design directive. The communication will cover technical aspects concerning the operating performance of different types of biomass stoves and building envelopes, in order to map the ongoing opportunities...

Environmental Priorities In Strategic Product Development

DEFF Research Database (Denmark)

Simon, M; Poole, S.; Sweatman, A.

2000-01-01

-design framework consisting of analyse, report, prioritize and improve steps, at both strategic and operational levels. Tests the framework by application in an Electrolux subsidiary producing vacuum cleaners, tabulates LCA results for one product and its constituents and components. Concludes that prioritizing......Reports progress of the Design for Environmental Decision Support (DEEDS) project, gives the project's aim as the development of appropriate tools and methods for eco-design for use in the electrical/electronics sector. Bases development of the tools and methods on the results of a survey of 19...

Research on self-esteem in decision-making and decision-making styles in orienteering athletes

Directory of Open Access Journals (Sweden)

Eroğlu Başak

2016-01-01

Full Text Available The aim of this study is to examine the self-esteem in decision making and decision-making styles of orienteering athletes in terms of different variables. 157 male and 43 female orienteering athletes, making a total of 200 athletes that joined the 3rd Level of Turkey Championship in 2015 have participated in this study which is in a survey model. The data collection tools were the Melbourne Decision-making. Quastionnaire I-II and the Personal Information Form which were adapted into Turkish by Deniz (2004. In the data analysis, descriptive statics, anova, t test and Tukey test have been utilized. There is a significant difference between athletes’ marital status, age groups, experiences in orienteering sports and self-esteem in decision making, decision making styles (p<0.05. According to the research results, it has been determined that married orienteering athletes prefer both self-esteem in decision making and vigilance decision-making style more often than the single athletes that mostly prefer procrastination decision-making style. Also, it has been found out that as the athletes’ age and experiences in sports increase, selfesteem and decision-making styles are affected more positively as well.

Decision making and cancer.

Science.gov (United States)

Reyna, Valerie F; Nelson, Wendy L; Han, Paul K; Pignone, Michael P

2015-01-01

We review decision making along the cancer continuum in the contemporary context of informed and shared decision making in which patients are encouraged to take a more active role in their health care. We discuss challenges to achieving informed and shared decision making, including cognitive limitations and emotional factors, but argue that understanding the mechanisms of decision making offers hope for improving decision support. Theoretical approaches to decision making that explain cognition, emotion, and their interaction are described, including classical psychophysical approaches, dual-process approaches that focus on conflicts between emotion versus cognition (or reason), and modern integrative approaches such as fuzzy-trace theory. In contrast to the earlier emphasis on rote use of numerical detail, modern approaches emphasize understanding the bottom-line gist of options (which encompasses emotion and other influences on meaning) and retrieving relevant social and moral values to apply to those gist representations. Finally, research on interventions to support better decision making in clinical settings is reviewed, drawing out implications for future research on decision making and cancer. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Making effective links to decision-making: Key challenges for health impact assessment

International Nuclear Information System (INIS)

Elliott, Eva; Francis, Sarah

2005-01-01

This paper draws on an exploratory research study to examine the effectiveness of health impact assessments in Wales. Through the review of five case study health impact assessments the research identified a number of benefits of the process in terms of skills and knowledge development amongst participants. The indirect contributions to decision-making were also evident including the way in which health impact assessment provided useful insights into the local community's perspective and raised awareness about the wider determinants of health. The process was also useful in establishing a dialogue between different stakeholders, which indirectly assisted decision-making and implementation. The direct links between health impact assessment and decision-making were more difficult to trace and this paper puts forward a number of suggestions for making those links more transparent. Suggestions include integrating decision-makers and clarifying the intended links to decision-making at the start of the health impact assessment process. Mainstreaming health impact assessment so that it is triggered as a routine part of all decision-making would help ensure it stands the best chance of informing decisions

Transport fleet sizing by using make and buy decision-making

Directory of Open Access Journals (Sweden)

Stojanović Đurđica

2011-01-01

Full Text Available Cost reduction is among the main quoted reasons for logistics outsourcing, while transport capacities and operations are among the most outsourced logistics areas. However, according to transaction costs theory, there is often room for transport insourcing. Furthermore, nowadays many authors stress that mixed solutions can give better results than “make” or “buy” alternatives. “Make or buy” decision-making normative models, methods, and procedures in transport planning are not much explored. Instead, research is rather focused on carrier selection techniques, whereby it is supposed that outsourcing transport capacities is the most suitable solution. The purpose of this paper is to contribute to the body of literature on classical “makeor-buy” decision-making in transport fleet sizing in a non-logistics enterprise. It goes beyond the basic “make or buy” decisionmaking, and intermediate solutions (i.e., “make and buy” are explored. Practical directions are given according to theoretical principles, and a case study is used to exemplify the main deductions. The research also has practical implications. Many enterprises in transition economies have faced the question of what to do with their in-house transport fleets. The obtained results are of interest to merchants and manufacturing enterprises that already have a private transport fleet and are considering how to rationalize it.

[Interoception and decision-making].

Science.gov (United States)

Ohira, Hideki

2015-02-01

We sometimes make decisions relying not necessarily on deliberative thoughts but on intuitive and emotional processes in uncertain situations. The somatic marker hypothesis proposed by Damasio argued that interoception, which means bodily responses such as sympathetic activity, can be represented in the insula and anterior cingulate cortex and can play critical roles in decision-making. Though this hypothesis has been criticized in its theoretical and empirical aspects, recent studies are expanding the hypothesis to elucidate multiple bodily responses including autonomic, endocrine, and immune activities that affect decision-making. In addition, cumulative findings suggest that the anterior insula where the inner model of interoception is represented can act as an interface between the brain and body in decision-making. This article aims to survey recent findings on the brain-body interplays underlying decision-making, and to propose hypotheses on the significance of the body in decision-making.

Using the Situated Clinical Decision-Making framework to guide analysis of nurses' clinical decision-making.

Science.gov (United States)

Gillespie, Mary

2010-11-01

Nurses' clinical decision-making is a complex process that holds potential to influence the quality of care provided and patient outcomes. The evolution of nurses' decision-making that occurs with experience has been well documented. In addition, literature includes numerous strategies and approaches purported to support development of nurses' clinical decision-making. There has been, however, significantly less attention given to the process of assessing nurses' clinical decision-making and novice clinical educators are often challenged with knowing how to best support nurses and nursing students in developing their clinical decision-making capacity. The Situated Clinical Decision-Making framework is presented for use by clinical educators: it provides a structured approach to analyzing nursing students' and novice nurses' decision-making in clinical nursing practice, assists educators in identifying specific issues within nurses' clinical decision-making, and guides selection of relevant strategies to support development of clinical decision-making. A series of questions is offered as a guide for clinical educators when assessing nurses' clinical decision-making. The discussion presents key considerations related to analysis of various decision-making components, including common sources of challenge and errors that may occur within nurses' clinical decision-making. An exemplar illustrates use of the framework and guiding questions. Implications of this approach for selection of strategies that support development of clinical decision-making are highlighted. Copyright © 2010 Elsevier Ltd. All rights reserved.

Teachers' Grading Decision Making

Science.gov (United States)

Isnawati, Ida; Saukah, Ali

2017-01-01

This study investigated teachers' grading decision making, focusing on their beliefs underlying their grading decision making, their grading practices and assessment types, and factors they considered in grading decision making. Two teachers from two junior high schools applying different curriculum policies in grade reporting in Indonesian…

Java Processor Optimized for RTSJ

Directory of Open Access Journals (Sweden)

Tu Shiliang

2007-01-01

Full Text Available Due to the preeminent work of the real-time specification for Java (RTSJ, Java is increasingly expected to become the leading programming language in real-time systems. To provide a Java platform suitable for real-time applications, a Java processor which can execute Java bytecode is directly proposed in this paper. It provides efficient support in hardware for some mechanisms specified in the RTSJ and offers a simpler programming model through ameliorating the scoped memory of the RTSJ. The worst case execution time (WCET of the bytecodes implemented in this processor is predictable by employing the optimization method proposed in our previous work, in which all the processing interfering predictability is handled before bytecode execution. Further advantage of this method is to make the implementation of the processor simpler and suited to a low-cost FPGA chip.

A First-Order One-Pass CPS Transformation

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse Reichstein

2001-01-01

We present a new transformation of λ-terms into continuation-passing style (CPS). This transformation operates in one pass and is both compositional and first-order. Previous CPS transformations only enjoyed two out of the three properties of being first-order, one-pass, and compositional......, but the new transformation enjoys all three properties. It is proved correct directly by structural induction over source terms instead of indirectly with a colon translation, as in Plotkin's original proof. Similarly, it makes it possible to reason about CPS-transformed terms by structural induction over...... source terms, directly.The new CPS transformation connects separately published approaches to the CPS transformation. It has already been used to state a new and simpler correctness proof of a direct-style transformation, and to develop a new and simpler CPS transformation of control-flow information....

A First-Order One-Pass CPS Transformation

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse Reichstein

2003-01-01

We present a new transformation of λ-terms into continuation-passing style (CPS). This transformation operates in one pass and is both compositional and first-order. Previous CPS transformations only enjoyed two out of the three properties of being first-order, one-pass, and compositional......, but the new transformation enjoys all three properties. It is proved correct directly by structural induction over source terms instead of indirectly with a colon translation, as in Plotkin's original proof. Similarly, it makes it possible to reason about CPS-transformed terms by structural induction over...... source terms, directly.The new CPS transformation connects separately published approaches to the CPS transformation. It has already been used to state a new and simpler correctness proof of a direct-style transformation, and to develop a new and simpler CPS transformation of control-flow information....

A proposal of group decision making procedure for supporting social consensus making

International Nuclear Information System (INIS)

Shimizu, Yoshiaki

1996-01-01

Being interested in supporting social consensus making, in this paper, we have proposed a group decision making procedure through conflict resolution in the following situation: each group has a different privilege with decision making; the final goal should be evaluated by a few qualitative sub-goals besides quantitative ones. For this purpose, we have developed a step-wise procedure that has been popularly adapted when encountered with complicated and large-scale problem-solving. As well as at the value system design phase, we applied the analytic hierarchy process, AHP to decide weights standing for the privilege at the decision making phase. Then, after rearranging the hierarchy of the sub-goals depending on the nature, we have provided an iterative procedure to derive a final solution from a discrete optimization problem. To reduce the difficulties of multi-objective decision making thereat, we took a scoring method for total evaluation and applied the genetic algorithm as a solution method. Through numerical experiments applied to a planning problem of the radioactive waste management system, we have shown numerically the proposed approach is very promising for social consensus making. (author)

Culinary Decision Making.

Science.gov (United States)

Curtis, Rob

1987-01-01

Advises directors of ways to include day care workers in the decision-making process. Enumerates benefits of using staff to help focus and direct changes in the day care center and discusses possible pitfalls in implementation of a collective decision-making approach to management. (NH)

Computer Game-based Learning: Applied Game Development Made Simpler

NARCIS (Netherlands)

Nyamsuren, Enkhbold

2018-01-01

The RAGE project (Realising an Applied Gaming Ecosystem, http://rageproject.eu/) is an ongoing initiative that aims to offer an ecosystem to support serious games’ development and use. Its two main objectives are to provide technologies for computer game-based pedagogy and learning and to establish

Heuristics for NP-hard optimization problems - simpler is better!?

Directory of Open Access Journals (Sweden)

Žerovnik Janez

2015-11-01

Full Text Available We provide several examples showing that local search, the most basic metaheuristics, may be a very competitive choice for solving computationally hard optimization problems. In addition, generation of starting solutions by greedy heuristics should be at least considered as one of very natural possibilities. In this critical survey, selected examples discussed include the traveling salesman, the resource-constrained project scheduling, the channel assignment, and computation of bounds for the Shannon capacity.

Consciousness: a Simpler Approach to the Mind-Brain Problem

OpenAIRE

Iglowitz, Jerome

2001-01-01

No explicit model of consciousness has ever been presented. This paper defines the beginnings of such a model based in mathematicians' "implicit definition" as compounded with virtual reality. Dennett's "color phi" argument suggests the necessary extension to fit real minds. I conclude that the mind is wholly intentional and virtual.

Ecolabel and ecodesign. Aims impossible for small and medium companies?

International Nuclear Information System (INIS)

Luciani, R.; Andriola, L.; Masoni, P.

2000-01-01

It is commonly held by now that a policy of sustainable development in the production sector cannot be faced in terms of simply reducing the environmental impact at the end of the production chain but should be imprinted with a preventive approach which, intervening on the production cycles and the products themselves, helps minimize pressure on the environment. To be competitive manufacturing industry must contribute a determinant amount to sustainable development by reducing the material content of products and increasing their use value, through processes and products-services that are innovative, safer, cleaner and based on a low use of natural resources. To be effective and avoid merely shifting the problem, this work should not be aimed at the level of individual plants or industries but be broadly planned, taking into account the entire value chain and hence the product's whole life-cycle. In addition, support should be given to small and medium-sized companies that characterize Italian production, because they find it hard to use the tools of a product policy originally ideated for big business [it

Ecodesign of organic photovoltaic modules from Danish and Chinese perspectives

DEFF Research Database (Denmark)

Espinosa Martinez, Nieves; Laurent, Alexis; Krebs, Frederik C

2015-01-01

The life cycle of a solar park made using organic photovoltaic (OPV) technology is assessed here. The modules have been fabricated in a pilot scale plant and they have been installed together with other components to evaluate the balance of system, in a solar park located in Denmark. Three possible...... pollution and metal depletion. The establishment of resource recovery systems for the end-of-life management of the OPV modules is therefore crucial to reduce overall environmental impacts. Liability on the manufacturers or on the operators should be implemented. The electricity produced from OPV solar...... waste management practices have been contemplated for the end of life of the solar park: recycling, incineration or the average local mix. The assessment of the environmental impacts of such a system reveals that silver used in the electrodes is overall the largest source of impacts, such as chemical...

Decision-making: Theory and practice

OpenAIRE

SM Turpin; MA Marais

2004-01-01

This paper compares a number of theoretical models of decision-making with the way in which senior managers make decisions in practice. Six prominent decision-makers were interviewed about their own decision-making style, as well as their use of decision support technology. Significant variation was found in personal decision-making styles. However, some central themes emerged, such as the importance of sensitivity to the decision-making context, attention to the presentation of information, ...

Dementia, Decision Making, and Capacity.

Science.gov (United States)

Darby, R Ryan; Dickerson, Bradford C

After participating in this activity, learners should be better able to:• Assess the neuropsychological literature on decision making and the medical and legal assessment of capacity in patients with dementia• Identify the limitations of integrating findings from decision-making research into capacity assessments for patients with dementia ABSTRACT: Medical and legal professionals face the challenge of assessing capacity and competency to make medical, legal, and financial decisions in dementia patients with impaired decision making. While such assessments have classically focused on the capacity for complex reasoning and executive functions, research in decision making has revealed that motivational and metacognitive processes are also important. We first briefly review the neuropsychological literature on decision making and on the medical and legal assessment of capacity. Next, we discuss the limitations of integrating findings from decision-making research into capacity assessments, including the group-to-individual inference problem, the unclear role of neuroimaging in capacity assessments, and the lack of capacity measures that integrate important facets of decision making. Finally, we present several case examples where we attempt to demonstrate the potential benefits and important limitations of using decision-making research to aid in capacity determinations.

Decision Making in Action

Science.gov (United States)

Orasanu, Judith; Statler, Irving C. (Technical Monitor)

1994-01-01

The importance of decision-making to safety in complex, dynamic environments like mission control centers and offshore installations has been well established. NASA-ARC has a program of research dedicated to fostering safe and effective decision-making in the manned spaceflight environment. Because access to spaceflight is limited, environments with similar characteristics, including aviation and nuclear power plants, serve as analogs from which space-relevant data can be gathered and theories developed. Analyses of aviation accidents cite crew judgement and decision making as causes or contributing factors in over half of all accidents. A similar observation has been made in nuclear power plants. Yet laboratory research on decision making has not proven especially helpful in improving the quality of decisions in these kinds of environments. One reason is that the traditional, analytic decision models are inappropriate to multidimensional, high-risk environments, and do not accurately describe what expert human decision makers do when they make decisions that have consequences. A new model of dynamic, naturalistic decision making is offered that may prove useful for improving decision making in complex, isolated, confined and high-risk environments. Based on analyses of crew performance in full-mission simulators and accident reports, features that define effective decision strategies in abnormal or emergency situations have been identified. These include accurate situation assessment (including time and risk assessment), appreciation of the complexity of the problem, sensitivity to constraints on the decision, timeliness of the response, and use of adequate information. More effective crews also manage their workload to provide themselves with time and resources to make good decisions. In brief, good decisions are appropriate to the demands of the situation. Effective crew decision making and overall performance are mediated by crew communication. Communication

Decision Making Under Uncertainty

Science.gov (United States)

2010-11-01

A sound approach to rational decision making requires a decision maker to establish decision objectives, identify alternatives, and evaluate those...often violate the axioms of rationality when making decisions under uncertainty. The systematic description of such observations may lead to the...which leads to “anchoring” on the initial value. The fact that individuals have been shown to deviate from rationality when making decisions

Decision making.

Science.gov (United States)

Chambers, David W

2011-01-01

A decision is a commitment of resources under conditions of risk in expectation of the best future outcome. The smart decision is always the strategy with the best overall expected value-the best combination of facts and values. Some of the special circumstances involved in decision making are discussed, including decisions where there are multiple goals, those where more than one person is involved in making the decision, using trigger points, framing decisions correctly, commitments to lost causes, and expert decision makers. A complex example of deciding about removal of asymptomatic third molars, with and without an EBD search, is discussed.

Sustainability appraisal. Quantitative methods and mathematical techniques for environmental performance evaluation

Energy Technology Data Exchange (ETDEWEB)

Erechtchoukova, Marina G.; Khaiter, Peter A. [York Univ., Toronto, ON (Canada). School of Information Technology; Golinska, Paulina (eds.) [Poznan Univ. of Technology (Poland)

2013-06-01

The book will present original research papers on the quantitative methods and techniques for the evaluation of the sustainability of business operations and organizations' overall environmental performance. The book contributions will describe modern methods and approaches applicable to the multi-faceted problem of sustainability appraisal and will help to fulfil generic frameworks presented in the literature with the specific quantitative techniques so needed in practice. The scope of the book is interdisciplinary in nature, making it of interest to environmental researchers, business managers and process analysts, information management professionals and environmental decision makers, who will find valuable sources of information for their work-related activities. Each chapter will provide sufficient background information, a description of problems, and results, making the book useful for a wider audience. Additional software support is not required. One of the most important issues in developing sustainable management strategies and incorporating ecodesigns in production, manufacturing and operations management is the assessment of the sustainability of business operations and organizations' overall environmental performance. The book presents the results of recent studies on sustainability assessment. It provides a solid reference for researchers in academia and industrial practitioners on the state-of-the-art in sustainability appraisal including the development and application of sustainability indices, quantitative methods, models and frameworks for the evaluation of current and future welfare outcomes, recommendations on data collection and processing for the evaluation of organizations' environmental performance, and eco-efficiency approaches leading to business process re-engineering.

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

Science.gov (United States)

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

Transport fleet sizing by using make and buy decision-making

OpenAIRE

Stojanović Đurđica; Nikoličić Svetlana; Miličić Milica

2011-01-01

Cost reduction is among the main quoted reasons for logistics outsourcing, while transport capacities and operations are among the most outsourced logistics areas. However, according to transaction costs theory, there is often room for transport insourcing. Furthermore, nowadays many authors stress that mixed solutions can give better results than “make” or “buy” alternatives. “Make or buy” decision-making normative models, methods, and procedures in transport planning are not much expl...

Human factors influencing decision making

OpenAIRE

Jacobs, Patricia A.

1998-01-01

This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

Realism and Impartiality: Making Sustainability Effective in Decision-Making.

Science.gov (United States)

Bastons, Miquel; Armengou, Jaume

2017-08-01

There is both individual and collective widespread concern in society about the impact of human activity and the effects of our decisions on the physical and social environment. This concern is included within the idea of sustainability. The meaning of the concept is still ambiguous and its practical effectiveness disputed. Like many other authors, this article uses as a starting point the definition proposed by the World Commission on Environment and Development (Our common future, Oxford University Press, Oxford, 1987), considering it to be a proposal for changing the assessment of the effects of decisions, from at least two perspectives: (1) what effects we should consider and (2) how we should assess them. Based on this double perspective, sustainability is explored as a method for decision-making which both expands the assessment of the consequences, and also provides an objective criterion for such assessment. It will be argued that the idea of sustainability, seen from this perspective, brings to decision-making two qualities which had been partially lost: realism and impartiality. In turn, the criteria for realism and impartiality in decision-making can be used to identify the limitations of some partial approaches to sustainability, which suffer from insufficient realism (emotional altruism), insufficient impartiality (tactical altruism) or both phenomena at once (egoism). The article concludes by demonstrating how realism and impartiality provide the basis for a new form of sustainable decision-making (ethical sustainability), which is dependent on the development of two moral virtues, prudence and benevolence, and which brings practical effectiveness and ethical sense to the concept of sustainability.

Research on self-esteem in decision-making and decision-making styles in orienteering athletes

OpenAIRE

Eroğlu Başak; Özkan Zekiye; Eroğlu Arif Kaan; Bilgin Şakire

2016-01-01

The aim of this study is to examine the self-esteem in decision making and decision-making styles of orienteering athletes in terms of different variables. 157 male and 43 female orienteering athletes, making a total of 200 athletes that joined the 3rd Level of Turkey Championship in 2015 have participated in this study which is in a survey model. The data collection tools were the Melbourne Decision-making. Quastionnaire I-II and the Personal Information Form which were adapted into Turkish ...

Organizational decision making

OpenAIRE

Grandori, Anna

2015-01-01

Approved for public release; distribution is unlimited This thesis develops a heuristic approach to organizational decision-making by synthesizing the classical, neo-classical and contingency approaches to organization theory. The conceptual framework developed also integrates the rational and cybernetic approaches with cognitive processes underlying the decision-making process. The components of the approach address the role of environment in organizational decision-maki...

Functional Programming in R

DEFF Research Database (Denmark)

Mailund, Thomas

Master functions and discover how to write functional programs in R. In this book, you'll make your functions pure by avoiding side-effects; you’ll write functions that manipulate other functions, and you’ll construct complex functions using simpler functions as building blocks. In Functional...... Programming in R, you’ll see how we can replace loops, which can have side-effects, with recursive functions that can more easily avoid them. In addition, the book covers why you shouldn't use recursion when loops are more efficient and how you can get the best of both worlds. Functional programming...... functions by combining simpler functions. You will: Write functions in R including infix operators and replacement functions Create higher order functions Pass functions to other functions and start using functions as data you can manipulate Use Filer, Map and Reduce functions to express the intent behind...

Science communication in policy making

DEFF Research Database (Denmark)

Coumou, Hilde; van der Werf Kulichova, Z.; Wehrmann, C.

2014-01-01

Policy making regarding application of agricultural biotechnology has been controversial. This study investigates what determines the motivation of European biotech scientists to actively participate in policy making. To do this, a conceptual framework was developed based on the Theory of Planned...... Behavior. The framework was operationalized in semi-structured interviews with 17 European biotech scientists to collect data about their motivation to involve in GMO policy making. The results of this qualitative study suggest that the attitude of the scientists towards active participation in policy...... making is dependent on their view of the way science and decision making relate to each other. The respondents who are currently active in policy making seem to be driven by commitment to the public good. However, many respondents feel social pressure from environmental NGOs to withdraw from engagement...

Science and film-making.

Science.gov (United States)

Gouyon, Jean-Baptiste

2016-01-01

The essay reviews the literature, mostly historical, on the relationship between science and film-making, with a focus on the science documentary. It then discusses the circumstances of the emergence of the wildlife making-of documentary genre. The thesis examined here is that since the early days of cinema, film-making has evolved from being subordinate to science, to being an equal partner in the production of knowledge, controlled by non-scientists. © The Author(s) 2015.

Avaliação do desempenho ambiental do processo produtivo de uma indústria madeireira

OpenAIRE

Debora Luciane Giacomet

2008-01-01

Esta dissertação aborda a avaliação do desempenho ambiental do processo produtivo em uma indústria madeireira. O trabalho está baseado na revisão de literatura sobre o tema, no mapeamento do processo produtivo e na aplicação das ferramentas de verificação de desempenho ambiental de Echeveste et al. (2002) e de Lean Environment Toolkit. A revisão de literatura investigou aspectos como sustentabilidade, sistemas de gestão ambiental, normas e certificações, ecodesign, subprodutos e resíduos e cl...

Proceedings of the General Committee for solar thermal energy 2015

International Nuclear Information System (INIS)

Gibert, Francois; Loyen, Richard; Khebchache, Bouzid; Cholin, Xavier; Leicher, David; Mozas, Kevin; Leclercq, Martine; Laugier, Patrick; Dias, Pedro; Kuczer, Eric; Benabdelkarim, Mohamed; Brottier, Laetitia; Soussana, Max; Cheze, David; Mugnier, Daniel; Laplagne, Valerie; Mykieta, Frederic; Ducloux, Antoine; Egret, Dominique; Noisette, Nadege; Peneau, Yvan; Seguis, Anne-Sophie; Gerard, Roland

2017-10-01

After an introducing contribution which discussed the difficult evolution of the solar thermal energy sector in 2015, contributions addressed development plans for SOCOL (a plan for collective solar thermal and solar heat) which aims at reviving the market and at opening new markets. A next set of contributions discussed how solar thermal energy can be at the service of energy transition. Following sessions addressed issues like innovation at the service of solar thermal energy, energetic display of solar systems and application of the Ecodesign and Labelling directives, and the reduction of carbon footprint and the energy dependence of territories

Potential environmental benefits of improving recycling of polyolefines – LCA of Magnetic density separation (MDS) developed in the EU FP7 funded project W2Plastic

DEFF Research Database (Denmark)

Olsen, Stig Irving; Bonou, Alexandra

2012-01-01

identify eco-design criteria for the development and secondly to document the potential environmental improvement of polyolefin recycling using the MDS technology. A preliminary study focusing solely on the carbon footprint benefits of recycling plastic waste compared to virgin production of polymers...... showed that there are large benefits to recycling. However, including other uses of the waste illustrates that the benefits to a large extent depend on that the recycled plastic have such high quality that it can actually replace virgin plastic and also to some extent depends on which energy systems e.......g. energy recovery from incineration substitutes....

Self-Esteem in Decision Making and Decision-Making Styles of Teachers

Science.gov (United States)

Temel, Veysel; Birol, Sefa Sahan; Nas, Kazim; Akpinar, Selahattin; Tekin, Murat

2015-01-01

The aim of the study was to examine the self-esteem in decision-making and decision-making styles of the teachers in various branches of Çat town of Erzurum Province, Turkey in terms of some variables in 2014-2015 year. A total of 153 teachers (84 females and 69 males) (age (? = 1.6536 ± 0.72837) from different departments participated in the…

RFID solution benefits Cambridge hospital.

Science.gov (United States)

James, Andrew

2013-10-01

Keeping track of thousands of pieces of equipment in a busy hospital environment is a considerable challenge, but, according to RFID tagging and asset tracking specialist, Harland Simon, RFID technology can make the task considerably simpler. Here Andrew James, the company's RFID sales manager, describes the positive benefits the technology has brought the Medical Equipment Library (MEL) at Addenbrooke's Hospital, one of the world's most famous teaching hospitals.

Iser: an international inherently safe reactor concept

International Nuclear Information System (INIS)

Wakabayashi, Hiroaki

1988-01-01

Iser is a modular standardised 200-300 MWe power reactor based on the PIUS principle. It differs from PIUS in being simpler, and making full use of existing steel-vessel-based LWR technology. Iser is an inherently safe reactor concept under development in Japan. It is a generic concept, not a patented commodity, and it is expected that an international association to develop the concept will be formed. (U.K.)

Decision-making: Theory and practice

Directory of Open Access Journals (Sweden)

SM Turpin

2004-12-01

Full Text Available This paper compares a number of theoretical models of decision-making with the way in which senior managers make decisions in practice. Six prominent decision-makers were interviewed about their own decision-making style, as well as their use of decision support technology. Significant variation was found in personal decision-making styles. However, some central themes emerged, such as the importance of sensitivity to the decision-making context, attention to the presentation of information, and the use of intuition. In terms of the use of decision support technology, the use of self-help tools, such as office software, was clearly favoured.

Reduction of the equation for lower hybrid waves in a plasma to a nonlinear Schroedinger equation

Science.gov (United States)

Karney, C. F. F.

1977-01-01

Equations describing the nonlinear propagation of waves in an anisotropic plasma are rarely exactly soluble. However it is often possible to make approximations that reduce the exact equations into a simpler equation. The use of MACSYMA to make such approximations, and so reduce the equation describing lower hybrid waves into the nonlinear Schrodinger equation which is soluble by the inverse scattering method is demonstrated. MACSYMA is used at several stages in the calculation only because there is a natural division between calculations that are easiest done by hand, and those that are easiest done by machine.

The Relations between Decision Making in Social Relationships and Decision Making Styles

Science.gov (United States)

Sari, Enver

2008-01-01

The research reported in this paper aimed to examine the relationships between decisiveness in social relationships, and the decision-making styles of a group of university students and to investigate the contributions of decision-making styles in predicting decisiveness in social relationship (conflict resolution, social relationship selection…

Make Better Food Choices

Science.gov (United States)

10 tips Nutrition Education Series make better food choices 10 tips for women’s health Fruits Grains Dairy Vegetables Protein Make yourself a priority and take time to care for yourself. ChooseMyPlate. gov ...

Making sense with ePortfolios

DEFF Research Database (Denmark)

Poulsen, Bo Klindt; Dimsits, Miriam

2017-01-01

of the statements from the students concerning their understanding of ePortfolio processes are fundamentally questions of how to make sense of the ePortfolio tool, both in their professional and personal lives. This calls for a didactical stance with the teachers who use ePortfolios, based on empowerment through......This article discusses the question of making sense out of working with ePortfolio in adult education. The article presents the results of a small-scale survey among adults in continuing education who have worked with ePortfolio as the central didactic principle. It is argued that many...... meaning-making, in order for ePortfolios to make sense. It is suggested that two relevant didactic perspectives for making sense of the world can be found in theories of biographicity and metaphor work. Moreover, a strong didactic stance that supports sense-making must be based on a strong teacher role...

The amygdala and decision-making.

Science.gov (United States)

Gupta, Rupa; Koscik, Timothy R; Bechara, Antoine; Tranel, Daniel

2011-03-01

Decision-making is a complex process that requires the orchestration of multiple neural systems. For example, decision-making is believed to involve areas of the brain involved in emotion (e.g., amygdala, ventromedial prefrontal cortex) and memory (e.g., hippocampus, dorsolateral prefrontal cortex). In this article, we will present findings related to the amygdala's role in decision-making, and differentiate the contributions of the amygdala from those of other structurally and functionally connected neural regions. Decades of research have shown that the amygdala is involved in associating a stimulus with its emotional value. This tradition has been extended in newer work, which has shown that the amygdala is especially important for decision-making, by triggering autonomic responses to emotional stimuli, including monetary reward and punishment. Patients with amygdala damage lack these autonomic responses to reward and punishment, and consequently, cannot utilize "somatic marker" type cues to guide future decision-making. Studies using laboratory decision-making tests have found deficient decision-making in patients with bilateral amygdala damage, which resembles their real-world difficulties with decision-making. Additionally, we have found evidence for an interaction between sex and laterality of amygdala functioning, such that unilateral damage to the right amygdala results in greater deficits in decision-making and social behavior in men, while left amygdala damage seems to be more detrimental for women. We have posited that the amygdala is part of an "impulsive," habit type system that triggers emotional responses to immediate outcomes. Copyright © 2010 Elsevier Ltd. All rights reserved.

Lateral prefrontal cortex subregions make dissociable contributions during fluid reasoning.

Science.gov (United States)

Hampshire, Adam; Thompson, Russell; Duncan, John; Owen, Adrian M

2011-01-01

Reasoning is a key component of adaptable "executive" behavior and is known to depend on a network of frontal and parietal brain regions. However, the mechanisms by which this network supports reasoning and adaptable behavior remain poorly defined. Here, we examine the relationship between reasoning, executive control, and frontoparietal function in a series of nonverbal reasoning experiments. Our results demonstrate that, in accordance with previous studies, a network of frontal and parietal brain regions is recruited during reasoning. Our results also reveal that this network can be fractionated according to how different subregions respond when distinct reasoning demands are manipulated. While increased rule complexity modulates activity within a right lateralized network including the middle frontal gyrus and the superior parietal cortex, analogical reasoning demand-or the requirement to remap rules on to novel features-recruits the left inferior rostrolateral prefrontal cortex and the lateral occipital complex. In contrast, the posterior extent of the inferior frontal gyrus, associated with simpler executive demands, is not differentially sensitive to rule complexity or analogical demand. These findings accord well with the hypothesis that different reasoning demands are supported by different frontal and parietal subregions.

Lateral Prefrontal Cortex Subregions Make Dissociable Contributions during Fluid Reasoning

Science.gov (United States)

Thompson, Russell; Duncan, John; Owen, Adrian M.

2011-01-01

Reasoning is a key component of adaptable “executive” behavior and is known to depend on a network of frontal and parietal brain regions. However, the mechanisms by which this network supports reasoning and adaptable behavior remain poorly defined. Here, we examine the relationship between reasoning, executive control, and frontoparietal function in a series of nonverbal reasoning experiments. Our results demonstrate that, in accordance with previous studies, a network of frontal and parietal brain regions is recruited during reasoning. Our results also reveal that this network can be fractionated according to how different subregions respond when distinct reasoning demands are manipulated. While increased rule complexity modulates activity within a right lateralized network including the middle frontal gyrus and the superior parietal cortex, analogical reasoning demand—or the requirement to remap rules on to novel features—recruits the left inferior rostrolateral prefrontal cortex and the lateral occipital complex. In contrast, the posterior extent of the inferior frontal gyrus, associated with simpler executive demands, is not differentially sensitive to rule complexity or analogical demand. These findings accord well with the hypothesis that different reasoning demands are supported by different frontal and parietal subregions. PMID:20483908

Decision-Making under Criteria Uncertainty

Science.gov (United States)

Kureychik, V. M.; Safronenkova, I. B.

2018-05-01

Uncertainty is an essential part of a decision-making procedure. The paper deals with the problem of decision-making under criteria uncertainty. In this context, decision-making under uncertainty, types and conditions of uncertainty were examined. The decision-making problem under uncertainty was formalized. A modification of the mathematical decision support method under uncertainty via ontologies was proposed. A critical distinction of the developed method is ontology usage as its base elements. The goal of this work is a development of a decision-making method under criteria uncertainty with the use of ontologies in the area of multilayer board designing. This method is oriented to improvement of technical-economic values of the examined domain.

Ethical Decision Making

DEFF Research Database (Denmark)

Lauesen, Linne Marie

2012-01-01

of the interaction between a corporation and its stakeholders. Methodology/approach: This paper offers a theoretical 'Organic Stakeholder Model' based on decision making theory, risk assessment and adaption to a rapidly changing world combined with appropriate stakeholder theory for ethical purposes in decision...... applicable): The Model is based on case studies, but the limited scope of the length of the paper did not leave room to show the empirical evidence, but only the theoretical study. Originality / value of a paper: The model offers a new way of combining risk management with ethical decision-making processes...... by the inclusion of multiple stakeholders. The conceptualization of the model enhances business ethics in decision making by managing and balancing stakeholder concerns with the same concerns as the traditional risk management models does – for the sake of the wider social responsibilities of the businesses...

Making Our Food Safe

International Nuclear Information System (INIS)

Madsen, Michael

2013-01-01

Full text: As civilization has progressed societies have strived to make food safer; from using fire to cook our food, and boiling our water to make it safe to drink, advances in technology have helped kill microorganisms that can make food unsafe. The FAO/IAEA Joint Division helps provide technical assistance to Member States that want to implement irradiation technology in making their food safer. Food and waterborne diarrhoeal diseases are estimated to kill roughly 2.2 million people annually, of which 1.9 million are children. Irradiating some of the foods we eat can save many of these lives by reducing the risk of food poisoning and killing the organisms that cause disease. Irradiation works by treating food with a small dose of ionizing radiation, this radiation disrupts the bacteria’s DNA and cell membranes structure stopping the organism from reproducing or functioning, but does not make the food radioactive. It can be applied to a variety of foods from spices and seasonings, to fruits and vegetables and is similar to pasteurization, but without the need for high temperatures that might impair food quality. (author)

Making Smart Food Choices

Science.gov (United States)

... turn JavaScript on. Feature: Healthy Aging Making Smart Food Choices Past Issues / Winter 2015 Table of Contents Everyday ... NIH www.nia.nih.gov/Go4Life Making Smart Food Choices To maintain a healthy weight, balance the calories ...

Market Exchange Rates Or Purchasing Power Parity. Does The Choice Make A Difference To The Climate Debate?

International Nuclear Information System (INIS)

Manne, A.S.; Richels, R.G.; Edmonds, J.A.

2005-01-01

Critics of the Intergovernmental Panel on Climate Change's Special Report on Emission Scenarios claim that the use of market exchange rates (MER) rather than purchasing power parity (PPP) to measure gross domestic product (GDP) has led to a significant upward bias in projections of greenhouse gas emissions, and hence unrealistically high future temperature. Rather than revisit the debate on the choice of exchange rates, we address a much simpler question: when it comes to temperature change, how much does it matter if potential GDP is expressed in MER rather than PPP? Employing a computable general equilibrium model designed to examine a variety of issues in the climate debate, we find that there is a difference, but that it is only minor

The Bayes linear approach to inference and decision-making for a reliability programme

International Nuclear Information System (INIS)

Goldstein, Michael; Bedford, Tim

2007-01-01

In reliability modelling it is conventional to build sophisticated models of the probabilistic behaviour of the component lifetimes in a system in order to deduce information about the probabilistic behaviour of the system lifetime. Decision modelling of the reliability programme requires a priori, therefore, an even more sophisticated set of models in order to capture the evidence the decision maker believes may be obtained from different types of data acquisition. Bayes linear analysis is a methodology that uses expectation rather than probability as the fundamental expression of uncertainty. By working only with expected values, a simpler level of modelling is needed as compared to full probability models. In this paper we shall consider the Bayes linear approach to the estimation of a mean time to failure MTTF of a component. The model built will take account of the variance in our estimate of the MTTF, based on a variety of sources of information

Making Sense of Natural Selection

Science.gov (United States)

Passmore, Cynthia; Coleman, Elizabeth; Horton, Jennifer; Parker, Heather

2013-01-01

At its core, science is about making sense of the world around us. Therefore, science education should engage students in that sense-making process. Helping students make sense of disciplinary core ideas and crosscutting concepts by engaging in scientific practices is the key innovation of the "Next Generation Science Standards"…

Interactive Strategy-Making

DEFF Research Database (Denmark)

Andersen, Torben Juul

2015-01-01

This article outlines an interactive strategy-making model that combines central reasoning with ongoing learning from decentralised responses. The management literature often presents strategy as implementing an optimal plan identified through rational analysis and ascribes potential shortcomings...... to failed communication and execution of the planned actions. However, effective strategy-making comprises both central reasoning from forward-looking planning considerations and decentralised responses to emerging events as interacting elements in a dynamic adaptive system. The interaction between...

[Decision making in cariology

NARCIS (Netherlands)

Verdonschot, E.H.A.M.; Liem, S.L.; Palenstein Helderman, W.H. van

2003-01-01

By conducting an oral examination, during radiographic examination and in treatment planning procedures dentists make numerous decisions. A dentist will be required to make his decisions explicit. Decision trees and decision analyses may play an important role. In a decision analysis, the

Variation in decision making

NARCIS (Netherlands)

Dall, Sasha R. X.; Gosling, Samuel; Gordon D.A., Brown,; Dingemanse, Niels; Ido, Erev,; Martin, Kocher,; Laura, Schulz,; Todd, Peter M; Weissing, Franz; Wolf, Max; Hammerstein, Peter; Stevens, Jeffrey R.

2012-01-01

Variation in how organisms allocate their behavior over their lifetimes is key to determining Darwinian fitness., and thus the evolution of human and nonhuman decision making. This chapter explores how decision making varies across biologically and societally significant scales and what role such

Improving Psychological Measurement: Does It Make a Difference? A Comment on Nesselroade and Molenaar (2016).

Science.gov (United States)

Maydeu-Olivares, Alberto

2016-01-01

Nesselroade and Molenaar advocate the use of an idiographic filter approach. This is a fixed-effects approach, which may limit the number of individuals that can be simultaneously modeled, and it is not clear how to model the presence of subpopulations. Most important, Nesselroade and Molenaar's proposal appears to be best suited for modeling long time series on a few variables for a few individuals. Long time series are not common in psychological applications. Can it be applied to the usual longitudinal data we face? These are characterized by short time series (four to five points in time), hundreds of individuals, and dozens of variables. If so, what do we gain? Applied settings most often involve between-individual decisions. I conjecture that their approach will not outperform common, simpler, methods. However, when intraindividual decisions are involved, their approach may have an edge.

Making people be healthy.

Science.gov (United States)

Wilkinson, Timothy Martin

2009-09-01

How are we supposed to decide the rights and wrongs of banning smoking in bars, restricting adverts for junk food, nagging people into being screened for cancers, or banning the sale of party pills? The aim of this paper is to think through the political ethics of trying to make people healthier through influencing or restricting their choices. This paper covers: (1) Paternalism. What it is, what it assumes. (2) The place of health in well-being, and how this makes paternalism problematic. (3) The mistakes people make in acting in their own interests, and the implications for pro-health paternalism. (4) Autonomy objections to paternalism. The paper (5) finishes on a note of hope, by commending the currently fashionable libertarian paternalism: trying to have one's carrot cake and eat it too. A persistent theme is that thinking sensibly about making people healthier needs subtlety, not broad, ringing declarations.

Decision-Making Based on Emotional Images

OpenAIRE

Katahira, Kentaro; Fujimura, Tomomi; Okanoya, Kazuo; Okada, Masato

2011-01-01

The emotional outcome of a choice affects subsequent decision making. While the relationship between decision making and emotion has attracted attention, studies on emotion and decision making have been independently developed. In this study, we investigated how the emotional valence of pictures, which was stochastically contingent on participants’ choices, influenced subsequent decision making. In contrast to traditional value-based decision-making studies that used money or food as a reward...

Decision making based on emotional images

OpenAIRE

Kentaro eKatahira; Kentaro eKatahira; Kentaro eKatahira; Tomomi eFujimura; Tomomi eFujimura; Kazuo eOkanoya; Kazuo eOkanoya; Kazuo eOkanoya; Masato eOkada; Masato eOkada; Masato eOkada

2011-01-01

The emotional outcome of a choice affects subsequent decision making. While the relationship between decision making and emotion has attracted attention, studies on emotion and decision making have been independently developed. In this study, we investigated how the emotional valence of pictures, which was stochastically contingent on participants’ choices, influenced subsequent decision making. In contrast to traditional value-based decision-making studies that used money or food as a reward...

Ethical decision-making, passivity and pharmacy

OpenAIRE

Cooper, R.J.; Bissell, P.; Wingfield, J.

2008-01-01

Background: Increasing interest in empirical ethics has enhanced understanding of healthcare professionals' ethical problems and attendant decision-making. A four-stage decision-making model involving ethical attention, reasoning, intention and action offers further insights into how more than reasoning alone may contribute to decision-making.\\ud \\ud Aims: To explore how the four-stage model can increase understanding of decision-making in healthcare and describe the decision-making of an und...

Decision Making in the Airplane

Science.gov (United States)

Orasanu, Judith; Shafto, Michael G. (Technical Monitor)

1995-01-01

The Importance of decision-making to safety in complex, dynamic environments like mission control centers, aviation, and offshore installations has been well established. NASA-ARC has a program of research dedicated to fostering safe and effective decision-making in the manned spaceflight environment. Because access to spaceflight is limited, environments with similar characteristics, including aviation and nuclear power plants, serve as analogs from which space-relevant data can be gathered and theories developed. Analyses of aviation accidents cite crew judgement and decision making as causes or contributing factors in over half of all accidents. Yet laboratory research on decision making has not proven especially helpful In improving the quality of decisions in these kinds of environments. One reason is that the traditional, analytic decision models are inappropriate to multi-dimensional, high-risk environments, and do not accurately describe what expert human decision makers do when they make decisions that have consequences. A new model of dynamic, naturalistic decision making is offered that may prove useful for improving decision making in complex, isolated, confined and high-risk environments. Based on analyses of crew performance in full-mission simulators and accident reports, features that define effective decision strategies in abnormal or emergency situations have been identified. These include accurate situation assessment (including time and risk assessment), appreciation of the complexity of the problem, sensitivity to constraints on the decision, timeliness of the response, and use of adequate information. More effective crews also manage their workload to provide themselves with time and resources to make good decisions. In brief, good decisions are appropriate to the demands of the situation. Effective crew decision making and overall performance are mediated by crew communication. Communication contributes to performance because it assures that

Between Policy-Making and Planning SEA and Strategic Decision-Making in the Danish Energy Sector

DEFF Research Database (Denmark)

Lyhne, Ivar

2011-01-01

This article deals with the challenge of approaching decision-making processes through strategic environmental assessment (SEA). It is argued that the interaction between policy-making and planning in strategic decision-making processes is a neglected reason for problems with applying SEA......, as legislation and guidance on SEA primarily approach either the policy or plan level. To substantiate the argument, the extent of interaction is empirically investigated. Four contemporary decision-making processes in the Danish energy sector are mapped as a series of choices. Fundamental changes...... with considerable environmental impacts are decided these years, often without preceding SEA processes. The mapping shows a profound interaction between policy-making and planning. In this interaction, public consultation, systematic environmental analyses, and transparency on alternatives are primarily related...

Focused Science Delivery makes science make sense.

Science.gov (United States)

Rachel W. Scheuering; Jamie. Barbour

2004-01-01

Science does not exist in a vacuum, but reading scientific publications might make you think it does. Although the policy and management implications of their findings could often touch a much wider audience, many scientists write only for the few people in the world who share their area of expertise. In addition, most scientific publications provide information that...

Making Team Differences Work

Science.gov (United States)

Strathman, Beth

2015-01-01

Most district and school leaders understand that recruiting group members who have differing backgrounds, perspectives, talents, and personalities makes for good decision-making. Unfortunately, simply assembling a variety of top-notch individuals does not necessarily mean their talents and perspectives will be fully considered. Beth Strathman…

Estimates of Inequality Indices Based on Simple Random, Ranked Set, and Systematic Sampling

OpenAIRE

Bansal, Pooja; Arora, Sangeeta; Mahajan, Kalpana K.

2013-01-01

Gini index, Bonferroni index, and Absolute Lorenz index are some popular indices of inequality showing different features of inequality measurement. In general simple random sampling procedure is commonly used to estimate the inequality indices and their related inference. The key condition that the samples must be drawn via simple random sampling procedure though makes calculations much simpler but this assumption is often violated in practice as the data does not always yield simple random ...

Perforated SiN membrane resonators for nanomechanical IR spectroscopy poster

DEFF Research Database (Denmark)

Kurek, Maksymilian; Carnoy, Matthias; Boisen, Anja

Constant progress in micro- and nanofabrication provides a great opportunity in development of micro- and nanomechanical resonatorsthat can be used for sensing purposes. These sensors usually consist of singly-clamped cantilever beams, doubly-clamped bridges ormembranes that exhibit resonant......, lateral dimension of1×1 mm2 and 2 µm perforation grid pitch were used instead of strings which makes the IR beam alignment significantly simpler whilemaintaining similar sampling efficiency and photothermal IR absorption sensitivity....

Search and imperative programming

OpenAIRE

Apt, Krzysztof; Schaerf, A.

1996-01-01

textabstractWe augment the expressive power of imperative programming in order to make it a more attractive vehicle for problems that involve search.The proposed additions are limited yet powerful and are inspired by the logic programming paradigm.We illustrate their use by presenting solutions to a number of classical problems, including the straight search problem, the knapsack problem, and the 8 queens problem. These solutions are substantially simpler than their counterparts written in th...

The Effect of Decision-Making Skill Training Programs on Self-Esteem and Decision-Making Styles

Science.gov (United States)

Colakkadioglu, Oguzhan; Celik, D. Billur

2016-01-01

Problem Statement: Decision making is a critical cognitive process in every area of human life. In this process, the individuals play an active role and obtain outputs with their functional use of decision-making skills. Therefore, the decision-making process can affect the course of life, life satisfaction, and the social relations of an…

Collaborative Decision Making in METOC

Science.gov (United States)

2002-01-01

desired effect (Eagly, & Chaiken, 1993). Arguably, artificial intelligence is representative of the best of approaches in rational decision - making ...2001), The quantum of social action and the function of emotion in decision - making , Emotional and Intelligent II: The Tangled Knot of Social...Collaborative decision making in METOC W.F. Lawless Paine College, Departments of Mathematics and Psychology Augusta, GA 30901-3182 ph: 706

Low relative error in consumer-grade GPS units make them ideal for measuring small-scale animal movement patterns

Directory of Open Access Journals (Sweden)

Greg A. Breed

2015-08-01

Full Text Available Consumer-grade GPS units are a staple of modern field ecology, but the relatively large error radii reported by manufacturers (up to 10 m ostensibly precludes their utility in measuring fine-scale movement of small animals such as insects. Here we demonstrate that for data collected at fine spatio-temporal scales, these devices can produce exceptionally accurate data on step-length and movement patterns of small animals. With an understanding of the properties of GPS error and how it arises, it is possible, using a simple field protocol, to use consumer grade GPS units to collect step-length data for the movement of small animals that introduces a median error as small as 11 cm. These small error rates were measured in controlled observations of real butterfly movement. Similar conclusions were reached using a ground-truth test track prepared with a field tape and compass and subsequently measured 20 times using the same methodology as the butterfly tracking. Median error in the ground-truth track was slightly higher than the field data, mostly between 20 and 30 cm, but even for the smallest ground-truth step (70 cm, this is still a signal-to-noise ratio of 3:1, and for steps of 3 m or more, the ratio is greater than 10:1. Such small errors relative to the movements being measured make these inexpensive units useful for measuring insect and other small animal movements on small to intermediate scales with budgets orders of magnitude lower than survey-grade units used in past studies. As an additional advantage, these units are simpler to operate, and insect or other small animal trackways can be collected more quickly than either survey-grade units or more traditional ruler/gird approaches.

Defining decision making: a qualitative study of international experts' views on surgical trainee decision making.

Science.gov (United States)

Rennie, Sarah C; van Rij, Andre M; Jaye, Chrystal; Hall, Katherine H

2011-06-01

Decision making is a key competency of surgeons; however, how best to assess decisions and decision makers is not clearly established. The aim of the present study was to identify criteria that inform judgments about surgical trainees' decision-making skills. A qualitative free text web-based survey was distributed to recognized international experts in Surgery, Medical Education, and Cognitive Research. Half the participants were asked to identify features of good decisions, characteristics of good decision makers, and essential factors for developing good decision-making skills. The other half were asked to consider these areas in relation to poor decision making. Template analysis of free text responses was performed. Twenty-nine (52%) experts responded to the survey, identifying 13 categories for judging a decision and 14 for judging a decision maker. Twelve features/characteristics overlapped (considered, informed, well timed, aware of limitations, communicated, knowledgeable, collaborative, patient-focused, flexible, able to act on the decision, evidence-based, and coherent). Fifteen categories were generated for essential factors leading to development of decision-making skills that fall into three major themes (personal qualities, training, and culture). The categories compiled from the perspectives of good/poor were predominantly the inverse of each other; however, the weighting given to some categories varied. This study provides criteria described by experts when considering surgical decisions, decision makers, and development of decision-making skills. It proposes a working definition of a good decision maker. Understanding these criteria will enable clinical teachers to better recognize and encourage good decision-making skills and identify poor decision-making skills for remediation.

Adapting Scott and Bruce's General Decision-Making Style Inventory to Patient Decision Making in Provider Choice.

Science.gov (United States)

Fischer, Sophia; Soyez, Katja; Gurtner, Sebastian

2015-05-01

Research testing the concept of decision-making styles in specific contexts such as health care-related choices is missing. Therefore, we examine the contextuality of Scott and Bruce's (1995) General Decision-Making Style Inventory with respect to patient choice situations. Scott and Bruce's scale was adapted for use as a patient decision-making style inventory. In total, 388 German patients who underwent elective joint surgery responded to a questionnaire about their provider choice. Confirmatory factor analyses within 2 independent samples assessed factorial structure, reliability, and validity of the scale. The final 4-dimensional, 13-item patient decision-making style inventory showed satisfactory psychometric properties. Data analyses supported reliability and construct validity. Besides the intuitive, dependent, and avoidant style, a new subdimension, called "comparative" decision-making style, emerged that originated from the rational dimension of the general model. This research provides evidence for the contextuality of decision-making style to specific choice situations. Using a limited set of indicators, this report proposes the patient decision-making style inventory as valid and feasible tool to assess patients' decision propensities. © The Author(s) 2015.

Combined make-to-order and make-to-stock in a food production system

NARCIS (Netherlands)

Soman, Chetan Anil; Donk, Dirk Pieter van; Gaalman, Gerard

2002-01-01

The research into multi-product production/inventory control systems has mainly assumed one of the two strategies: Make-to-Order (MTO) or Make-to-Stock (MTS). In practice, however, many companies cater to an increasing variety of products with varying logistical demands (e.g. short due dates,

Combined make-to-order and make-to-stock in a food production system

NARCIS (Netherlands)

Soman, C.A.; van Donk, D.P.; Gaalman, G.J.C.

2004-01-01

The research into multi-product production/inventory control systems has mainly assumed one of the two strategies: make-to-order (MTO) or make-to-stock (MTS). In practice, however, many companies cater to an increasing variety of products with varying logistical demands (e.g. short due dates,

Serotonin and decision making processes.

Science.gov (United States)

Homberg, Judith R

2012-01-01

Serotonin (5-HT) is an important player in decision making. Serotonergic antidepressant, anxiolytic and antipsychotic drugs are extensively used in the treatment of neuropsychiatric disorders characterized by impaired decision making, and exert both beneficial and harmful effects in patients. Detailed insight into the serotonergic mechanisms underlying decision making is needed to strengthen the first and weaken the latter. Although much remains to be done to achieve this, accumulating studies begin to deliver a coherent view. Thus, high central 5-HT levels are generally associated with improved reversal learning, improved attentional set shifting, decreased delay discounting, and increased response inhibition, but a failure to use outcome representations. Based on 5-HT's evolutionary role, I hypothesize that 5-HT integrates expected, or changes in, relevant sensory and emotional internal/external information, leading to vigilance behaviour affecting various decision making processes. 5-HT receptor subtypes play distinctive roles in decision making. 5-HT(2A) agonists and 5-HT2c antagonists decrease compulsivity, whereas 5-HT(2A) antagonists and 5-HT(2C) agonists decrease impulsivity. 5-HT(6) antagonists univocally affect decision making processes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Decision-Making Theories and Models: A Discussion of Rational and Psychological Decision-Making Theories and Models: The Search for a Cultural-Ethical Decision-Making Model

OpenAIRE

Oliveira, Arnaldo

2007-01-01

This paper examines rational and psychological decision-making models. Descriptive and normative methodologies such as attribution theory, schema theory, prospect theory, ambiguity model, game theory, and expected utility theory are discussed. The definition of culture is reviewed, and the relationship between culture and decision making is also highlighted as many organizations use a cultural-ethical decision-making model.

Constraint programming and decision making

CERN Document Server

Kreinovich, Vladik

2014-01-01

In many application areas, it is necessary to make effective decisions under constraints. Several area-specific techniques are known for such decision problems; however, because these techniques are area-specific, it is not easy to apply each technique to other applications areas. Cross-fertilization between different application areas is one of the main objectives of the annual International Workshops on Constraint Programming and Decision Making. Those workshops, held in the US (El Paso, Texas), in Europe (Lyon, France), and in Asia (Novosibirsk, Russia), from 2008 to 2012, have attracted researchers and practitioners from all over the world. This volume presents extended versions of selected papers from those workshops. These papers deal with all stages of decision making under constraints: (1) formulating the problem of multi-criteria decision making in precise terms, (2) determining when the corresponding decision problem is algorithmically solvable; (3) finding the corresponding algorithms, and making...

Tools for collaborative decision-making

CERN Document Server

Zaraté, Pascale

2013-01-01

Decision-making has evolved recently thanks to the introduction of information and communication technologies in many organizations, which has led to new kinds of decision-making processes, called "collaborative decision-making", at the organizational and cognitive levels. This book looks at the development of the decision-making process in organizations. Decision-aiding and its paradigm of problem solving are defined, showing how decision-makers now need to work in a cooperative way. Definitions of cooperation and associated concepts such as collaboration and coordination are given and a framework of cooperative decision support systems is presented, including intelligent DSS, cooperative knowledge-based systems, workflow, group support systems, collaborative engineering, integrating with a collaborative decision-making model in part or being part of global projects. Several models and experimental studies are also included showing that these new processes have to be supported by new types of tools, several ...

Role of affect in decision making.

Science.gov (United States)

Bandyopadhyay, Debarati; Pammi, V S Chandrasekhar; Srinivasan, Narayanan

2013-01-01

Emotion plays a major role in influencing our everyday cognitive and behavioral functions, including decision making. We introduce different ways in which emotions are characterized in terms of the way they influence or elicited by decision making. This chapter discusses different theories that have been proposed to explain the role of emotions in judgment and decision making. We also discuss incidental emotional influences, both long-duration influences like mood and short-duration influences by emotional context present prior to or during decision making. We present and discuss results from a study with emotional pictures presented prior to decision making and how that influences both decision processes and postdecision experience as a function of uncertainty. We conclude with a summary of the work on emotions and decision making in the context of decision-making theories and our work on incidental emotions. Copyright © 2013 Elsevier B.V. All rights reserved.

It Makes You Think

Science.gov (United States)

Harden, Helen

2009-01-01

This article provides an overview of the "It Makes You Think" resource. The lessons provided by this resource show how students can learn about the global dimension through science. The "It Makes You Think" resource contains ten topics: (1) Metals in jewellery worldwide; (2) Global food market; (3) The worldwide travels of…

Modeling decision making as a support tool for policy making on renewable energy development

International Nuclear Information System (INIS)

Cannemi, Marco; García-Melón, Mónica; Aragonés-Beltrán, Pablo; Gómez-Navarro, Tomás

2014-01-01

This paper presents the findings of a study on decision making models for the analysis of capital-risk investors’ preferences on biomass power plants projects. The aim of the work is to improve the support tools for policy makers in the field of renewable energy development. Analytic Network Process (ANP) helps to better understand capital-risk investors preferences towards different kinds of biomass fueled power plants. The results of the research allow public administration to better foresee the investors’ reaction to the incentive system, or to modify the incentive system to better drive investors’ decisions. Changing the incentive system is seen as major risk by investors. Therefore, public administration must design better and longer-term incentive systems, forecasting market reactions. For that, two scenarios have been designed, one showing a typical decision making process and another proposing an improved decision making scenario. A case study conducted in Italy has revealed that ANP allows understanding how capital-risk investors interpret the situation and make decisions when investing on biomass power plants; the differences between the interests of public administrations’s and promoters’, how decision making could be influenced by adding new decision criteria, and which case would be ranked best according to the decision models. - Highlights: • We applied ANP to the investors’ preferences on biomass power plants projects. • The aim is to improve the advising tools for renewable energy policy making. • A case study has been carried out with the help of two experts. • We designed two scenarios: decision making as it is and how could it be improved. • Results prove ANP is a fruitful tool enhancing participation and transparency

Motivations Underlying Career Decision-Making Activities: The Career Decision-Making Autonomy Scale (CDMAS)

Science.gov (United States)

Guay, Frederic

2005-01-01

The purpose of the present research was to develop and validate a measure of motivation toward career decision-making activities, the Career Decision-Making Autonomy Scale (CDMAS). The CDMAS is designed to assess the constructs of intrinsic motivation, identified regulation, introjected regulation, and external regulation. A longitudinal study was…

Does making meaning make it better? Narrative meaning-making and well-being in at-risk African-American adolescent females

Science.gov (United States)

Sales, Jessica M.; Merrill, Natalie A.; Fivush, Robyn

2012-01-01

It has been argued that, for certain people, attempts at making meaning about past life events, especially challenging events, might be detrimental to well-being. In this study we explored the association between narrative indicators of meaning-making and psychological well-being, while also considering the role of individual level factors such as life history, personality characteristics and locus of control, among an at-risk sample of low socioeconomic status inner-city African-American adolescent females with challenging lives. We found that having a more external locus of control and including more cognitive processing language in narratives about a highly negative past experience were associated with increased depressive symptoms. Our findings suggest that certain types of narrative meaning-making language may reflect ongoing and unsuccessful efforts after meaning, and, may be more similar to rumination than to resolution. Additionally, they support claims that for certain individuals from challenging backgrounds, efforts after meaning might not be psychologically healthy. PMID:22897108

From Career Decision-Making Styles to Career Decision-Making Profiles: A Multidimensional Approach

Science.gov (United States)

Gati, Itamar; Landman, Shiri; Davidovitch, Shlomit; Asulin-Peretz, Lisa; Gadassi, Reuma

2010-01-01

Previous research on individual differences in career decision-making processes has often focused on classifying individuals into a few types of decision-making "styles" based on the most dominant trait or characteristic of their approach to the decision process (e.g., rational, intuitive, dependent; Harren, 1979). In this research, an…

Rule-based decision making model

International Nuclear Information System (INIS)

Sirola, Miki

1998-01-01

A rule-based decision making model is designed in G2 environment. A theoretical and methodological frame for the model is composed and motivated. The rule-based decision making model is based on object-oriented modelling, knowledge engineering and decision theory. The idea of safety objective tree is utilized. Advanced rule-based methodologies are applied. A general decision making model 'decision element' is constructed. The strategy planning of the decision element is based on e.g. value theory and utility theory. A hypothetical process model is built to give input data for the decision element. The basic principle of the object model in decision making is division in tasks. Probability models are used in characterizing component availabilities. Bayes' theorem is used to recalculate the probability figures when new information is got. The model includes simple learning features to save the solution path. A decision analytic interpretation is given to the decision making process. (author)

Entrepreneurs` Cognitive and Decision Making Styles

Directory of Open Access Journals (Sweden)

Mahmoud Motvaseli

2015-12-01

Full Text Available The main purpose of this study is to explore the relation between decision-making styles which are measured by the General decision-making style (GDMS test and information processing styles which are often termed cognitive styles and are, in this study, measured by Cognitive Style Inventory. The authors directed a survey research on 162 Iranian students. Structural equation modeling techniques were used to measure the impact of cognitive styles on decision-making styles. The authors found that cognitive styles have a positive impact on decision-making styles. In spite of the abundant research on factors that affect decision-making styles, few researches have tested the relationship between cognitive styles and decision-making styles. This study examines the impact of cognitive styles on decision-making styles in Iran. This study, like most research paper studies, cannot easily be generalized. Furthermore, the results of this study could be affected by economic conditions.

Modal Inclusion Logic: Being Lax is Simpler than Being Strict

DEFF Research Database (Denmark)

Hella, Lauri; Kuusisto, Antti Johannes; Meier, Arne

2015-01-01

We investigate the computational complexity of the satisfiability problem of modal inclusion logic. We distinguish two variants of the problem: one for strict and another one for lax semantics. The complexity of the lax version turns out to be complete for EXPTIME, whereas with strict semantics...

A simpler and elegant algorithm for computing fractal dimension in ...

Indian Academy of Sciences (India)

Chaotic systems are now frequently encountered in almost all branches of sciences. Dimension of such systems provides an important measure for easy characterization of dynamics of the systems. Conventional algorithms for computing dimension of such systems in higher dimensional state space face an unavoidable ...

Reaction dynamics of electronically excited alkali atoms with simpler molecules

International Nuclear Information System (INIS)

Weiss, P.S.; Mestdagh, J.M.; Schmidt, H.; Vernon, M.F.; Covinsky, M.H.; Balko, B.A.; Lee, Y.T.

1985-05-01

The reactions of electronically excited sodium atoms with simple molecules have been studied in crossed molecular beams experiments. Electronically excited Na(3 2 P/sub 3/2/, 4 2 D/sub 5/2/, and 5 2 S/sub 1/2/) were produced by optical pumping using single frequency dye lasers. The effects of the symmetry, and the orientation and alignment of the excited orbital on the chemical reactivity, and detailed information on the reaction dynamics were derived from measurements of the product angular and velocity distributions. 12 refs., 9 figs

N=4 SUSY Yang-Mills: Three loops made simple(r)

Energy Technology Data Exchange (ETDEWEB)

Dokshitzer, Yu.L. [LPTHE, Universities of Paris-VI and VII and CNRS, Paris (France); Marchesini, G. [University of Milano-Bicocca and INFN Sezione di Milano-Bicocca, Milan (Italy)]. E-mail: marchesini@mib.infn.it

2007-03-15

We construct universal parton evolution equation that produces space- and time-like anomalous dimensions for the maximally super-symmetric N=4 Yang-Mills field theory model, and find that its kernel satisfies the Gribov-Lipatov reciprocity relation in three loops. Given a simple structure of the evolution kernel, this should help to generate the major part of multi-loop contributions to QCD anomalous dimensions, due to classical soft gluon radiation effects.

Moral and Ethical Decision Making

Science.gov (United States)

2007-07-01

rational ones (i.e. Kohlberg’s influential model of decision making ). However, non- rational elements, such as affect, risk perception, risk preference...dread or anxiety) play a strong role in many types of decisions , and that the addition of decision makers’ emotions to models of choice may make ...White, 1994) agree that emotions are an integral part of ethical decision making as well. Emotions arise in the context of interpersonal

Viewpoint: Decision-making in committees

OpenAIRE

Li Hao; Wing Suen

2009-01-01

This article reviews recent developments in the theory of committee decision-making. A committee consists of self-interested members who make a public decision by aggregating imperfect information dispersed among them according to a pre-specified decision rule. We focus on costly information acquisition, strategic information aggregation, and rules and processes that enhance the quality of the committee decision. Seeming inefficiencies of the committee decision-making process such as over-cau...

Investment choice under uncertainty: A review essay

Directory of Open Access Journals (Sweden)

Trifunović Dejan

2005-01-01

Full Text Available An investment opportunity whose return is perfectly predictable, hardly exists at all. Instead, investor makes his decisions under conditions of uncertainty. Theory of expected utility is the main analytical tool for description of choice under uncertainty. Critics of the theory contend that individuals have bounded rationality and that the theory of expected utility is not correct. When agents are faced with risky decisions they behave differently, conditional on their attitude towards risk. They can be risk loving, risk averse or risk neutral. In order to make an investment decision it is necessary to compare probability distribution functions of returns. Investment decision making is much simpler if one uses expected values and variances instead of probability distribution functions.

Ethical aspect price decision making

Directory of Open Access Journals (Sweden)

Grubor Aleksandar

2007-01-01

Full Text Available Price decision making in a marketing program framework creatings is a complicated and delicated part of marketing management, especially to keep in sight culminating of mass external factors. In a market economies price policy as a marketing mix instrument rarely is regulated by the law, which opening the ethical aspect questions of price decision making process. The ethics in the price decision making means consideration of the inner law of the individual (marketing managers and/or consumers, whose irreverence does not entail any juridical sanctions, rather its application is sanctioned by the self - awareness. The acception and stability of the ethical aspect price decision making are determined by the characteristic of selected marketing environment.

Making Healthy Choices Easier

DEFF Research Database (Denmark)

Guldborg Hansen, Pelle; Skov, Laurits Rohden; Lund Skov, Katrine

2016-01-01

. However, integration and testing of the nudge approach as part of more comprehensive public health strategies aimed at making healthy choices easier is being threatened by inadequate understandings of its scientific character, relationship with regulation and its ethical implications. This article reviews...... working with or incorporating the nudge approach into programs or policies aimed at making healthy choices easier...

Quality as Sense-Making

Science.gov (United States)

Marshall, Stephen

2016-01-01

Sense-making is a process of engaging with complex and dynamic environments that provides organisations and their leaders with a flexible and agile model of the world. The seven key properties of sense-making describe a process that is social and that respects the range of different stakeholders in an organisation. It also addresses the need to…

Make or buy decision considering uncertainty based on fuzzy logic using simulation and multiple criteria decision making

Directory of Open Access Journals (Sweden)

Ali Mohtashami

2013-01-01

Full Text Available Decision making on making/buying problem has always been a challenge to decision makers. In this paper a methodology has been proposed to resolve this challenge. This methodology is capable of evaluating making/buying decision making under uncertainty. For uncertainty, the fuzzy logic and simulation approaches have been used. The proposed methodology can be applied to parts with multi stage manufacturing processes and different suppliers. Therefore this methodology provides a scale for decision making from full outsourcing to full manufacturing and with selecting appropriate supplier.

Direct Posterior Bipolar Cervical Facet Radiofrequency Rhizotomy: A Simpler and Safer Approach to Denervate the Facet Capsule.

Science.gov (United States)

Palea, Ovidiu; Andar, Haroon M; Lugo, Ramon; Granville, Michelle; Jacobson, Robert E

2018-03-14

Radiofrequency cervical rhizotomy has been shown to be effective for the relief of chronic neck pain, whether it be due to soft tissue injury, cervical spondylosis, or post-cervical spine surgery. The target and technique have traditionally been taught using an oblique approach to the anterior lateral capsule of the cervical facet joint. The goal is to position the electrode at the proximal location of the recurrent branch after it leaves the exiting nerve root and loops back to the cervical facet joint. The standard oblique approach to the recurrent nerve requires the testing of both motor and sensory components to verify the correct position and ensure safety so as to not damage the slightly more anterior nerve root. Bilateral lesions require the repositioning of the patient's neck. Poorly positioned electrodes can also pass anteriorly and contact the nerve root or vertebral artery. The direct posterior approach presented allows electrode positioning over a broader expanse of the facet joint without risk to the nerve root or vertebral artery. Over a four-year period, direct posterior radiofrequency ablation was performed under fluoroscopic guidance at multiple levels without neuro-stimulation testing with zero procedural neurologic events even as high as the C2 spinal segment. The direct posterior approach allows either unipolar or bipolar lesioning at multiple levels. Making a radiofrequency lesion along the larger posterior area of the facet capsule is as effective as the traditional target point closer to the nerve root but technically easier, allowing bilateral access and safety. The article will review the anatomy and innervation of the cervical facet joint and capsule, showing the diffuse nerve supply extending into the capsule of the facet joint that is more extensive than the recurrent medial sensory branches that have been the focus of radiofrequency lesioning.

The decision-making process in public healthcare entities – identification of the decision-making process type

Directory of Open Access Journals (Sweden)

Szymaniec-Mlicka Karolina

2017-05-01

Full Text Available The decisions made in the organization determine its success, therefore, conducting studies in the scope of decision-making seems important both for theory and practice. The aim of the studies was to identify the type of decision-making process in public medical entities with the use of typology developed by P. Nutt. For this purpose we used qualitative methods. Interviews with 8 directors of hospitals were conducted and the reconstruction was made on the basis of the decision-making process, which enabled the assignment of the model of decision-making process to the organization. The research indicated that four organizations use the historical decision-making model, three organizations represent the model of generating solutions, and one organization uses the model of available solutions.

Decision-making impairment in anorexia nervosa: New insights into the role of age and decision-making style.

Science.gov (United States)

Giannunzio, Valeria; Degortes, Daniela; Tenconi, Elena; Collantoni, Enrico; Solmi, Marco; Santonastaso, Paolo; Favaro, Angela

2018-07-01

Patients with anorexia nervosa (AN) often report difficulties in decision making, which may interfere with treatment. The aim of this study was to investigate decision making in a large sample of adolescent and adult patients with AN, by using the Iowa gambling task. Participants were 611 female individuals (310 patients and 301 controls) who underwent neuropsychological and clinical assessment. Significantly poorer decision-making performance was observed in adult patients, whereas no difference emerged between affected and nonaffected adolescents. Both adolescent and adult patients were characterized by trends for higher levels of attention to losses in comparison with healthy controls. Although healthy adult women exhibited better decision-making performance than healthy adolescents, in AN, there was no improvement of decision making with age. A cluster analysis identified 2 different styles of decision making in both patients and controls: a conservative style and an impulsive style. Our study provides evidence of dysfunctional decision making in adult patients with AN and reveals an association between poor decision making and excessive punishment sensitivity in AN. The clinical and scientific implications of these findings merit further exploration. Copyright © 2018 John Wiley & Sons, Ltd and Eating Disorders Association.

Oracle Data Dictionary Pocket Reference

CERN Document Server

Kreines, David

2003-01-01

If you work with Oracle, then you don't need to be told that the data dictionary is large and complex, and grows larger with each new Oracle release. It's one of the basic elements of the Oracle database you interact with regularly, but the sheer number of tables and views makes it difficult to remember which view you need, much less the name of the specific column. Want to make it simpler? The Oracle Data Dictionary Pocket Reference puts all the information you need right at your fingertips. Its handy and compact format lets you locate the table and view you need effortlessly without stoppin

Intersubjective meaning making

DEFF Research Database (Denmark)

Davidsen, Jacob

of single-touch screen interaction among 8-9 year-old children presented here, shows that while the constraints of single-touch screens does not support equality of interaction at the verbal and the physical level, there seems to be an intersubjective learning outcome. More precisely, the constraints...... of single-touch screens offer support for intersubjective meaning making in its ability of constraining the interaction. By presenting a short embodied interaction analysis of 22 seconds of collaboration, I illustrate how an embodied interaction perspective on intersubjective meaning making can tell...... a different story about touch-screen supported collaborative learning....

European ErP Directive. Total condensing technology: the solution for heating and DHW units in the hotel sector

International Nuclear Information System (INIS)

Martín, G.

2016-01-01

Since 26 September 2015, the Ecodesign ErP Directive has been of compulsory application for EU Member States as regards the design of Energy-related Products (ErP) and as from its entry into force only those products manufactured according to the ErP requirements can be sold with the EC label. Although this directive affects over 1,000 product categories, for those relating to HVAC and DHW production, it covers boilers, heat pumps, accumulators, cogeneration systems, combined products systems, establishing their minimum efficiency levels, the maximum levels of NOX emissions, the minimum insulation for accumulators and the maximum level of acoustic emissions for heat pumps. (Author)

European ErP Directive. Total condensing technology: the solution for heating and DHW units in the hotel sector; Directiva Europea ErP. Tecnología de condensación total, solución para equipos productores de calefacción y ACS en el sector hotelero

Energy Technology Data Exchange (ETDEWEB)

Martín, G.

2016-07-01

Since 26 September 2015, the Ecodesign ErP Directive has been of compulsory application for EU Member States as regards the design of Energy-related Products (ErP) and as from its entry into force only those products manufactured according to the ErP requirements can be sold with the EC label. Although this directive affects over 1,000 product categories, for those relating to HVAC and DHW production, it covers boilers, heat pumps, accumulators, cogeneration systems, combined products systems, establishing their minimum efficiency levels, the maximum levels of NOX emissions, the minimum insulation for accumulators and the maximum level of acoustic emissions for heat pumps. (Author)

Harnessing the hybrid power supply systems of utility grid and photovoltaic panels at retrofit residential single family building in Medan

Science.gov (United States)

Pangaribuan, A. B.; Rahmat, R. F.; Lidya, M. S.; Zálešák, M.

2017-01-01

The paper describes improvisation mode of energy supply source by collaboration between national utility grid as represented by fossil fuels and PV as independent renewable power resource in order to aim the energy consumptions efficiently in retrofit single family house. In this case, one existing single family house model in Medan, Indonesia was observed for the possibility of future refurbishment. The eco-design version of the house model and prediction analyses regarding nearby potential renewable energy resource (solar system) had been made using Autodesk Revit MEP 2015, Climate Consultant 6.0 and Green Building Studio Analysis. Economical evaluation of using hybrid power supply is discussed as well.

Making PMT halftone prints

Energy Technology Data Exchange (ETDEWEB)

Corey, J.D.

1977-05-01

In the printing process for technical reports presently used at Bendix Kansas City Division, photographs are reproduced by pasting up PMT halftone prints on the artwork originals. These originals are used to make positive-working plastic plates for offset lithography. Instructions for making good-quality halftone prints using Eastman Kodak's PMT materials and processes are given in this report. 14 figures.

Ethical decision-making, passivity and pharmacy.

Science.gov (United States)

Cooper, R J; Bissell, P; Wingfield, J

2008-06-01

Increasing interest in empirical ethics has enhanced understanding of healthcare professionals' ethical problems and attendant decision-making. A four-stage decision-making model involving ethical attention, reasoning, intention and action offers further insights into how more than reasoning alone may contribute to decision-making. To explore how the four-stage model can increase understanding of decision-making in healthcare and describe the decision-making of an under-researched professional group. 23 purposively sampled UK community pharmacists were asked, in semi-structured interviews, to describe ethical problems in their work and how they were resolved. Framework analysis of transcribed interviews utilised the four decision-making stages, together with constant comparative methods and deviant-case analysis. Pharmacists were often inattentive and constructed problems in legal terms. Ethical reasoning was limited, but examples of appeals to consequences, the golden rule, religious faith and common-sense experience emerged. Ethical intention was compromised by frequent concern about legal prosecution. Ethical inaction was common, typified by pharmacists' failure to report healthcare professionals' bad practices, and ethical passivity emerged to describe these negative examples of the four decision-making stages. Pharmacists occasionally described more ethically active decision-making, but this often involved ethical uncertainty. The four decision-making stages are a useful tool in considering how healthcare professionals try to resolve ethical problems in practice. They reveal processes often ignored in normative theories, and their recognition and the emergence of ethical passivity indicates the complexity of decision-making in practice. Ethical passivity may be deleterious to patients' welfare, and concerns emerge about improving pharmacists' ethical training and promoting ethical awareness and responsibility.

Making Interoperability Easier with the NASA Metadata Management Tool

Science.gov (United States)

Shum, D.; Reese, M.; Pilone, D.; Mitchell, A. E.

2016-12-01

ISO 19115 has enabled interoperability amongst tools, yet many users find it hard to build ISO metadata for their collections because it can be large and overly flexible for their needs. The Metadata Management Tool (MMT), part of NASA's Earth Observing System Data and Information System (EOSDIS), offers users a modern, easy to use browser based tool to develop ISO compliant metadata. Through a simplified UI experience, metadata curators can create and edit collections without any understanding of the complex ISO-19115 format, while still generating compliant metadata. The MMT is also able to assess the completeness of collection level metadata by evaluating it against a variety of metadata standards. The tool provides users with clear guidance as to how to change their metadata in order to improve their quality and compliance. It is based on NASA's Unified Metadata Model for Collections (UMM-C) which is a simpler metadata model which can be cleanly mapped to ISO 19115. This allows metadata authors and curators to meet ISO compliance requirements faster and more accurately. The MMT and UMM-C have been developed in an agile fashion, with recurring end user tests and reviews to continually refine the tool, the model and the ISO mappings. This process is allowing for continual improvement and evolution to meet the community's needs.

A New Interlink Decision Making Index for Making Multi-criteria Decision

Directory of Open Access Journals (Sweden)

Eric Hu

2012-11-01

Full Text Available Multi-criteria decisions usually require measurement or evaluation of performance in different units and their mix by application of weighting factors. This approach lads to potential manipulation of the results as a direct consequence of the applied weightings. In this paper a mechanism that is the brain child of the authors, has been proposed to overcome this problem. It is known as the Interlink Decision Making Index (IDMI and has all the desired features: simple, interlink (all criteria and automatically guaranteed dominant influence of critical criteria (i.e. no human weighting needed. The IDMI is capable of reflecting the total merits of a particular option once the normal decision making criteria and (up to two critical criteria have been chosen. Then, without arbitrarily weighting criteria, comparison and selection of the best possible option can be made. Simple software has been developed to do this numerical transfer and graphic presentation. Two hypothetical examples are presented in the paper to demonstrate the application of the IDMI concept and its advantages over the traditional "tabular and weightingmethod" in the decision making process. 

Nonrational processes in ethical decision making.

Science.gov (United States)

Rogerson, Mark D; Gottlieb, Michael C; Handelsman, Mitchell M; Knapp, Samuel; Younggren, Jeffrey

2011-10-01

Most current ethical decision-making models provide a logical and reasoned process for making ethical judgments, but these models are empirically unproven and rely upon assumptions of rational, conscious, and quasilegal reasoning. Such models predominate despite the fact that many nonrational factors influence ethical thought and behavior, including context, perceptions, relationships, emotions, and heuristics. For example, a large body of behavioral research has demonstrated the importance of automatic intuitive and affective processes in decision making and judgment. These processes profoundly affect human behavior and lead to systematic biases and departures from normative theories of rationality. Their influence represents an important but largely unrecognized component of ethical decision making. We selectively review this work; provide various illustrations; and make recommendations for scientists, trainers, and practitioners to aid them in integrating the understanding of nonrational processes with ethical decision making.

Knowledge, decision making, and uncertainty

International Nuclear Information System (INIS)

Fox, J.

1986-01-01

Artificial intelligence (AI) systems depend heavily upon the ability to make decisions. Decisions require knowledge, yet there is no knowledge-based theory of decision making. To the extent that AI uses a theory of decision-making it adopts components of the traditional statistical view in which choices are made by maximizing some function of the probabilities of decision options. A knowledge-based scheme for reasoning about uncertainty is proposed, which extends the traditional framework but is compatible with it

Decision Making Styles and Progress in Occupational Decision Making.

Science.gov (United States)

Phillips, Susan D.; And Others

1984-01-01

Examined the role of rational, intuitive, and dependent decisional strategies in facilitating decisions about postcollege occupation among college students (N=71). Results indicated that the use of a dependent decision-making style was the single most powerful predictor of progress. (LLL)

Neural substrates of decision-making.

Science.gov (United States)

Broche-Pérez, Y; Herrera Jiménez, L F; Omar-Martínez, E

2016-06-01

Decision-making is the process of selecting a course of action from among 2 or more alternatives by considering the potential outcomes of selecting each option and estimating its consequences in the short, medium and long term. The prefrontal cortex (PFC) has traditionally been considered the key neural structure in decision-making process. However, new studies support the hypothesis that describes a complex neural network including both cortical and subcortical structures. The aim of this review is to summarise evidence on the anatomical structures underlying the decision-making process, considering new findings that support the existence of a complex neural network that gives rise to this complex neuropsychological process. Current evidence shows that the cortical structures involved in decision-making include the orbitofrontal cortex (OFC), anterior cingulate cortex (ACC), and dorsolateral prefrontal cortex (DLPFC). This process is assisted by subcortical structures including the amygdala, thalamus, and cerebellum. Findings to date show that both cortical and subcortical brain regions contribute to the decision-making process. The neural basis of decision-making is a complex neural network of cortico-cortical and cortico-subcortical connections which includes subareas of the PFC, limbic structures, and the cerebellum. Copyright © 2014 Sociedad Española de Neurología. Published by Elsevier España, S.L.U. All rights reserved.

Affective Decision Making in Artificial Intelligence : Making Virtual Characters With High Believability

OpenAIRE

Johansson, Anja

2012-01-01

Artificial intelligence is often used when creating believable virtual characters in games or in other types of virtual environments. The intelligent behavior these characters show to the player is often flawed, leading to a worse gameplay experience. In particular, there is often little or no emotional impact on the decision making of the characters. This thesis focuses on extending decision-making and pathfinding mechanisms for virtual characters, with a particular focus on the use of emoti...

Information du Contexte comme une Ressource : Une Approche Orientée Service pour la Sensibilité au Contexte

OpenAIRE

Romero , Daniel

2011-01-01

Nowadays, ubiquitous environments become part of our daily lives. At home, work, cars, hotels, supermarkets and others public spaces we find technologies (electronics and computational elements) that try to make our life simpler and easier in a transparent way. In recent years, the potential of these environments is more and more exploited with the advent and widespread usage of smartphones. This kind of devices enables the execution of applications that are able to adapt seamlessly to the cu...

The Boltzmann equation in the difference formulation

Energy Technology Data Exchange (ETDEWEB)

Szoke, Abraham [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brooks III, Eugene D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-05-06

First we recall the assumptions that are needed for the validity of the Boltzmann equation and for the validity of the compressible Euler equations. We then present the difference formulation of these equations and make a connection with the time-honored Chapman - Enskog expansion. We discuss the hydrodynamic limit and calculate the thermal conductivity of a monatomic gas, using a simplified approximation for the collision term. Our formulation is more consistent and simpler than the traditional derivation.

Comparing the Palmer Drought Index and the Standardized Precipitation Index for Zagreb Gric Observatory

Science.gov (United States)

Pandzic, K.; Likso, T.

2012-04-01

Conventional Palmer Drought Index (PDI) and recent Standardized Precipitation Index (SPI) for Zagreb Gric Observatory are compared by spectral analysis technique. Data for a period 1862-2010 are used. The results indicate that SPI is simpler for interpretation but PDI more comprehensive index. On the other side, lack of temperature within SPI, make impossible application of it on climate change interpretation. Possible applications of them in irrigation scheduling system is considered as well for drought risk assessment.

Direct contrast-enhanced MR venography in the diagnosis of May-Thurner Syndrome

Energy Technology Data Exchange (ETDEWEB)

Gurel, Kamil, E-mail: kamilgurel@hotmail.com [Baskent University, School of Medicine, Adana Medical and Research Center, Department of Radiology (Turkey); Gurel, Safiye; Karavas, Erdal [Abant Izzet Baysal University, Izzet Baysal School of Medicine, Department of Radiology (Turkey); Buharalioglu, Yavuz; Daglar, Bahadir [Abant Izzet Baysal University, Izzet Baysal School of Medicine, Department of Cardiovascular Surgery (Turkey)

2011-11-15

Visualization of lower extremity veins with MR venography still needs improvement. The latest advancement is direct contrast-enhanced 3D MR venography which is based on display of venous system during direct injection of paramagnetic extracellular contrast agent into pedal veins. We used automated injection of contrast agent with a power injector makings this application simpler and faster, achieved to show the iliac vein compression syndrome and post-thrombotic changes of the left iliac and femoral veins.

Note-Making in Social Studies.

Science.gov (United States)

Fowler, Robert W.

1985-01-01

Note-making is one excellent method for helping students retain important points made by the teacher. Techniques that elementary and secondary social studies teacher can use to teach note-making skills are described. (RM)

IN GHANA: MAKING PUBLICuPRIVATE

African Journals Online (AJOL)

2004-12-02

Dec 2, 2004 ... and the manager of public utilities gains comparative adVantages in capturing ... managerial decision—making,and makes evaluation and monitoring .... tion, since in theory the private company should be concerned about.

Command Decision-Making: Experience Counts

National Research Council Canada - National Science Library

Wolgast, Kelly A

2005-01-01

Decision-making is the mainstay of military leadership and command. Due to the changed nature of the current military environment, military commanders can no longer rely solely on the traditional Military Decision-making Process (MDMP...

Decision making on fitness landscapes

Science.gov (United States)

Arthur, R.; Sibani, P.

2017-04-01

We discuss fitness landscapes and how they can be modified to account for co-evolution. We are interested in using the landscape as a way to model rational decision making in a toy economic system. We develop a model very similar to the Tangled Nature Model of Christensen et al. that we call the Tangled Decision Model. This is a natural setting for our discussion of co-evolutionary fitness landscapes. We use a Monte Carlo step to simulate decision making and investigate two different decision making procedures.

Decision Making on Fitness Landscapes

DEFF Research Database (Denmark)

Arthur, Rudy; Sibani, Paolo

2017-01-01

We discuss fitness landscapes and how they can be modified to account for co-evolution. We are interested in using the landscape as a way to model rational decision making in a toy economic system. We develop a model very similar to the Tangled Nature Model of Christensen et. al. that we call...... the Tangled Decision Model. This is a natural setting for our discussion of co-evolutionary fitness landscapes. We use a Monte Carlo step to simulate decision making and investigate two different decision making procedures....

Shared decision-making and patient autonomy.

Science.gov (United States)

Sandman, Lars; Munthe, Christian

2009-01-01

In patient-centred care, shared decision-making is advocated as the preferred form of medical decision-making. Shared decision-making is supported with reference to patient autonomy without abandoning the patient or giving up the possibility of influencing how the patient is benefited. It is, however, not transparent how shared decision-making is related to autonomy and, in effect, what support autonomy can give shared decision-making. In the article, different forms of shared decision-making are analysed in relation to five different aspects of autonomy: (1) self-realisation; (2) preference satisfaction; (3) self-direction; (4) binary autonomy of the person; (5) gradual autonomy of the person. It is argued that both individually and jointly these aspects will support the models called shared rational deliberative patient choice and joint decision as the preferred versions from an autonomy perspective. Acknowledging that both of these models may fail, the professionally driven best interest compromise model is held out as a satisfactory second-best choice.

Extended two-photon microscopy in live samples with Bessel beams: steadier focus, faster volume scans, and simpler stereoscopic imaging.

Science.gov (United States)

Thériault, Gabrielle; Cottet, Martin; Castonguay, Annie; McCarthy, Nathalie; De Koninck, Yves

2014-01-01

Two-photon microscopy has revolutionized functional cellular imaging in tissue, but although the highly confined depth of field (DOF) of standard set-ups yields great optical sectioning, it also limits imaging speed in volume samples and ease of use. For this reason, we recently presented a simple and retrofittable modification to the two-photon laser-scanning microscope which extends the DOF through the use of an axicon (conical lens). Here we demonstrate three significant benefits of this technique using biological samples commonly employed in the field of neuroscience. First, we use a sample of neurons grown in culture and move it along the z-axis, showing that a more stable focus is achieved without compromise on transverse resolution. Second, we monitor 3D population dynamics in an acute slice of live mouse cortex, demonstrating that faster volumetric scans can be conducted. Third, we acquire a stereoscopic image of neurons and their dendrites in a fixed sample of mouse cortex, using only two scans instead of the complete stack and calculations required by standard systems. Taken together, these advantages, combined with the ease of integration into pre-existing systems, make the extended depth-of-field imaging based on Bessel beams a strong asset for the field of microscopy and life sciences in general.

Make

CERN Document Server

Frauenfelder, Mark

2012-01-01

The first magazine devoted entirely to do-it-yourself technology projects presents its 29th quarterly edition for people who like to tweak, disassemble, recreate, and invent cool new uses for technology. MAKE Volume 29 takes bio-hacking to a new level. Get introduced to DIY tracking devices before they hit the consumer electronics marketplace. Learn how to build an EKG machine to study your heartbeat, and put together a DIY bio lab to study athletic motion using consumer grade hardware.

Introduction of making of Micom robot

International Nuclear Information System (INIS)

Park, Sang Beom

1991-01-01

This book introduces micro robot like what is micro robot? mouse and cat, writing of plan of making, and tools for making, micom cat and mechanical cat, making of mechanical cat, sensor of CAT-3, software of CAT-3, motor and drive circuit of CAT-3, computer mouse of general system,, world of micro mouse, introduction of MICHI, sensor of MICHI, development of software like monitor function and communication program, related things of MICHI, advice for making of MICHI and arrangement of parts and program.

Rough multiple objective decision making

CERN Document Server

Xu, Jiuping

2011-01-01

Rough Set TheoryBasic concepts and properties of rough sets Rough Membership Rough Intervals Rough FunctionApplications of Rough SetsMultiple Objective Rough Decision Making Reverse Logistics Problem with Rough Interval Parameters MODM based Rough Approximation for Feasible RegionEVRMCCRMDCRM Reverse Logistics Network Design Problem of Suji Renewable Resource MarketBilevel Multiple Objective Rough Decision Making Hierarchical Supply Chain Planning Problem with Rough Interval Parameters Bilevel Decision Making ModelBL-EVRM BL-CCRMBL-DCRMApplication to Supply Chain Planning of Mianyang Co., LtdStochastic Multiple Objective Rough Decision Multi-Objective Resource-Constrained Project Scheduling UnderRough Random EnvironmentRandom Variable Stochastic EVRM Stochastic CCRM Stochastic DCRM Multi-Objective rc-PSP/mM/Ro-Ra for Longtan Hydropower StationFuzzy Multiple Objective Rough Decision Making Allocation Problem under Fuzzy Environment Fuzzy Variable Fu-EVRM Fu-CCRM Fu-DCRM Earth-Rock Work Allocation Problem.

Modelling decision-making by pilots

Science.gov (United States)

Patrick, Nicholas J. M.

1993-01-01

Our scientific goal is to understand the process of human decision-making. Specifically, a model of human decision-making in piloting modern commercial aircraft which prescribes optimal behavior, and against which we can measure human sub-optimality is sought. This model should help us understand such diverse aspects of piloting as strategic decision-making, and the implicit decisions involved in attention allocation. Our engineering goal is to provide design specifications for (1) better computer-based decision-aids, and (2) better training programs for the human pilot (or human decision-maker, DM).

Imagine-making disciples in youth ministry … that will make disciples

Directory of Open Access Journals (Sweden)

Malan Nel

2015-08-01

Full Text Available Discipling youth may be one of the ‘missing links’ in developing missional thinking and missional local churches. This is even more so where churches suffer from a very obvious estrangement among generations. This article draws on the most recent literature on developing missional churches. The departure point is the argument of a the New Testament scholar, who refers to the description of Matthew 28:16–20 as the manifesto of the church – a manifesto that lies on the same level of value as the Shema of Israel: ‘Listen, o Israel, the Lord our God is the only One.‘ This manifesto wants to tell us how new and differently we have to think on how people come into the body and how people will stay in the body. Picking up on three of my theological premises this article will work with a research question: What kind of church will make disciples in youth ministry? It will also work towards theological suggestions on how to make disciples in youth ministry in such a way that young disciples will make disciples.

Serotonin and decision making processes.

NARCIS (Netherlands)

Homberg, J.R.

2012-01-01

Serotonin (5-HT) is an important player in decision making. Serotonergic antidepressant, anxiolytic and antipsychotic drugs are extensively used in the treatment of neuropsychiatric disorders characterized by impaired decision making, and exert both beneficial and harmful effects in patients.

Decision Making in Adults with ADHD

Science.gov (United States)

Montyla, Timo; Still, Johanna; Gullberg, Stina; Del Missier, Fabio

2012-01-01

Objectives: This study examined decision-making competence in ADHD by using multiple decision tasks with varying demands on analytic versus affective processes. Methods: Adults with ADHD and healthy controls completed two tasks of analytic decision making, as measured by the Adult Decision-Making Competence (A-DMC) battery, and two affective…

Making EDM Electrodes By Stereolithography

Science.gov (United States)

Barlas, Philip A.

1988-01-01

Stereolithography is computer-aided manufacturing technique. Used to make models and molds of electrodes for electrical-discharge machining (EDM). Eliminates intermediate steps in fabrication of plastic model of object used in making EDM electrode to manufacture object or mold for object.

Decision-making: Theory and Practice

CSIR Research Space (South Africa)

Turpin, SM

2004-01-01

Full Text Available of decision support technology. Much variation was found in people’s personal decision-making styles. However, some central themes emerged, such as the importance of sensitivity to the decision-making context, attention to the presentation of information...

Stakeholder involvement in CSR strategy-making?

DEFF Research Database (Denmark)

Trapp, Leila

2014-01-01

A given characteristic of successful corporate social responsibility (CSR) programs is that they reflect stakeholder expectations and preferences for corporate behavior. This study examines the process by which this alignment is sought by CSR managers in the CSR strategy-making process. Through...... listening to others in the strategy-making process rather than directly involving others in decision-making. Also, because non-stakeholders, such as paid-for consultants, are found to be note-worthy influencers in the CSR strategy-making process, it is concluded that the process is not only a stakeholder...

Intergroup conflict and rational decision making.

Science.gov (United States)

Martínez-Tur, Vicente; Peñarroja, Vicente; Serrano, Miguel A; Hidalgo, Vanesa; Moliner, Carolina; Salvador, Alicia; Alacreu-Crespo, Adrián; Gracia, Esther; Molina, Agustín

2014-01-01

The literature has been relatively silent about post-conflict processes. However, understanding the way humans deal with post-conflict situations is a challenge in our societies. With this in mind, we focus the present study on the rationality of cooperative decision making after an intergroup conflict, i.e., the extent to which groups take advantage of post-conflict situations to obtain benefits from collaborating with the other group involved in the conflict. Based on dual-process theories of thinking and affect heuristic, we propose that intergroup conflict hinders the rationality of cooperative decision making. We also hypothesize that this rationality improves when groups are involved in an in-group deliberative discussion. Results of a laboratory experiment support the idea that intergroup conflict -associated with indicators of the activation of negative feelings (negative affect state and heart rate)- has a negative effect on the aforementioned rationality over time and on both group and individual decision making. Although intergroup conflict leads to sub-optimal decision making, rationality improves when groups and individuals subjected to intergroup conflict make decisions after an in-group deliberative discussion. Additionally, the increased rationality of the group decision making after the deliberative discussion is transferred to subsequent individual decision making.

Intergroup Conflict and Rational Decision Making

Science.gov (United States)

Martínez-Tur, Vicente; Peñarroja, Vicente; Serrano, Miguel A.; Hidalgo, Vanesa; Moliner, Carolina; Salvador, Alicia; Alacreu-Crespo, Adrián; Gracia, Esther; Molina, Agustín

2014-01-01

The literature has been relatively silent about post-conflict processes. However, understanding the way humans deal with post-conflict situations is a challenge in our societies. With this in mind, we focus the present study on the rationality of cooperative decision making after an intergroup conflict, i.e., the extent to which groups take advantage of post-conflict situations to obtain benefits from collaborating with the other group involved in the conflict. Based on dual-process theories of thinking and affect heuristic, we propose that intergroup conflict hinders the rationality of cooperative decision making. We also hypothesize that this rationality improves when groups are involved in an in-group deliberative discussion. Results of a laboratory experiment support the idea that intergroup conflict –associated with indicators of the activation of negative feelings (negative affect state and heart rate)– has a negative effect on the aforementioned rationality over time and on both group and individual decision making. Although intergroup conflict leads to sub-optimal decision making, rationality improves when groups and individuals subjected to intergroup conflict make decisions after an in-group deliberative discussion. Additionally, the increased rationality of the group decision making after the deliberative discussion is transferred to subsequent individual decision making. PMID:25461384

Intergroup conflict and rational decision making.

Directory of Open Access Journals (Sweden)

Vicente Martínez-Tur

Full Text Available The literature has been relatively silent about post-conflict processes. However, understanding the way humans deal with post-conflict situations is a challenge in our societies. With this in mind, we focus the present study on the rationality of cooperative decision making after an intergroup conflict, i.e., the extent to which groups take advantage of post-conflict situations to obtain benefits from collaborating with the other group involved in the conflict. Based on dual-process theories of thinking and affect heuristic, we propose that intergroup conflict hinders the rationality of cooperative decision making. We also hypothesize that this rationality improves when groups are involved in an in-group deliberative discussion. Results of a laboratory experiment support the idea that intergroup conflict -associated with indicators of the activation of negative feelings (negative affect state and heart rate- has a negative effect on the aforementioned rationality over time and on both group and individual decision making. Although intergroup conflict leads to sub-optimal decision making, rationality improves when groups and individuals subjected to intergroup conflict make decisions after an in-group deliberative discussion. Additionally, the increased rationality of the group decision making after the deliberative discussion is transferred to subsequent individual decision making.

How genes make up your mind

DEFF Research Database (Denmark)

Ramsøy, Thomas; Skov, Martin

2010-01-01

Neuroeconomics is the multidisciplinary study of value-based decision-making. One of the core topics is how emotions affect decision-making. Developments in economic models of decision-making have been influenced by technological innovations and empirical findings in cognitive neuroscience. Now......, a recent approach in cognitive neuroscience, often referred to as "imaging genetics", promises to make significant contributions to our understanding of both behavioral and neural aspects of value-based decision-making. Recent work has demonstrated the role of neurotransmitter alterations in clinical...... states such as Parkinson's disease, depression and anxiety, and how this may affect decision behavior. However, these insights are limited through their focus on extreme neuropathology, which sheds little light on similar functions in healthy individuals. Here, we present and discuss studies of the role...

Maritime Governance and Policy-Making

CERN Document Server

Roe, Michael

2013-01-01

A close analysis of the framework of existing governance and the existing jurisdictional arrangements for shipping and ports reveals that while policy-making is characterized by national considerations through flags, institutional representation at all jurisdictions and the inviolability of the state, the commercial, financial, legal and operational environment of the sector is almost wholly global. This governance mismatch means that in practice the maritime industry can avoid policies which it dislikes by trading nations off against one another, while enjoying the freedoms and benefits of a globalized economy. A Post-modern interpretation of this globalized society prompts suggestions for change in maritime policy-making so that the governance of the sector better matches more closely the environment in which shipping and ports operate. Maritime Governance and Policy-Making is a controversial commentary on the record of policy-making in the maritime sector and assesses whether the reason for continued polic...

Managerial Decision Making in Traffic

Directory of Open Access Journals (Sweden)

Teodor Perić

2003-11-01

Full Text Available Decision-making is defined as a selection of a certain actionamong several alternatives. It is the essence of planning, asin the managerial sense there is no plan until a decision of engagementof resources, reputation and direction of activities ismade. Decision-making is, in fact, only a step in planning, evenwhen it is performed quickly and without special consideration.It is what we all experience every day. It is one of the most fascinatingbiological activities and the subject of frightening implicationsfor the whole human race. Since various techniques improvethe system and the quality of managerial decision-making,they are classified into three assumptions: risk analysis, decision-making trees, and the theory of revealed preference. Allof these are based on the interaction of a certain number of importantvariables out of which many contain the elements ofuncertainty, but maybe also high level of probability.

Rodent models of adaptive decision making.

Science.gov (United States)

Izquierdo, Alicia; Belcher, Annabelle M

2012-01-01

Adaptive decision making affords the animal the ability to respond quickly to changes in a dynamic environment: one in which attentional demands, cost or effort to procure the reward, and reward contingencies change frequently. The more flexible the organism is in adapting choice behavior, the more command and success the organism has in navigating its environment. Maladaptive decision making is at the heart of much neuropsychiatric disease, including addiction. Thus, a better understanding of the mechanisms that underlie normal, adaptive decision making helps achieve a better understanding of certain diseases that incorporate maladaptive decision making as a core feature. This chapter presents three general domains of methods that the experimenter can manipulate in animal decision-making tasks: attention, effort, and reward contingency. Here, we present detailed methods of rodent tasks frequently employed within these domains: the Attentional Set-Shift Task, Effortful T-maze Task, and Visual Discrimination Reversal Learning. These tasks all recruit regions within the frontal cortex and the striatum, and performance is heavily modulated by the neurotransmitter dopamine, making these assays highly valid measures in the study of psychostimulant addiction.

Adolescent Sexual Decision-Making: An Integrative Review.

Science.gov (United States)

Hulton, Linda J.

2001-10-03

PURPOSE: The purpose of this integrative review was to summarize the present literature to identify factors associated with adolescent sexual decision-making. Thirty-eight salient research studies were selected as a basis of this review from the databases of Medline, CINAHL, and Psychinfo using the Cooper methodology. CONCLUSIONS: Two categories of decision-making were identified: 1) The research on factors related to the decisions that adolescents make to become sexually active or to abstain from sexual activity; 2) The research on factors related to contraceptive decision-making. The most consistent findings were that the factors of gender differences, cognitive development, perception of benefits, parental influences, social influences, and sexual knowledge were important variables in the decision-making processes of adolescents. IMPLICATIONS: Practice implications for nursing suggest that clinicians should assess adolescent sexual decision-making in greater detail and address the social and psychological context in which sexual experiences occur. Nurses must be aware of the differences between adolescent and adult decision-making processes and incorporate knowledge of growth and development into intervention strategies. Moreover, to the degree that adolescent sexual decision-making proves to be less than rational, interventions designed to improve competent sexual decision-making are needed.

Advancing in the Career Decision-Making Process: The Role of Coping Strategies and Career Decision-Making Profiles

Science.gov (United States)

Perez, Maya; Gati, Itamar

2017-01-01

We tested the associations among the career decision-making difficulties, the career decision status, and either (a) the career decision-making profiles of 575 young adults, or (b) the coping strategies of 379 young adults. As hypothesized, a more advanced decision status was negatively associated with both career decision-making difficulties…

Making Connections

Science.gov (United States)

Pien, Cheng Lu; Dongsheng, Zhao

2011-01-01

Effective teaching includes enabling learners to make connections within mathematics. It is easy to accord with this statement, but how often is it a reality in the mathematics classroom? This article describes an approach in "connecting equivalent" fractions and whole number operations. The authors illustrate how a teacher can combine a common…

Making yourself indispensable.

Science.gov (United States)

Zenger, John H; Folkman, Joseph R; Edinger, Scott K

2011-10-01

Peter Drucker and other leadership thinkers have long argued that leaders should focus on strengthening their strengths. How should they do that? Improving on a weakness is pretty easy and straight forward: You can make measurable progress by honing and practicing basic techniques. But developing a strength is a different matter, because simply doing more of what you're good at will yield only incremental improvements. If you are strong technically, becoming even more of a technical expert won't make you a dramatically better leader. If, however, you use what the authors call "nonlinear development"--similar to an athlete's cross-training--you can achieve exponential results. Your technical expertise will become more powerful if, for instance, you build on your communication skills, enabling you to explain technical problems both more broadly and more effectively. The authors, all from the leadership development consultancy Zenger Folkman, present a step-by-step process by which developing leaders can identify their strengths (through either a formal or an informal 360-degree evaluation), select appropriate complementary skills (the article identifies up to a dozen for each core strength), and develop those skills to dramatically improve their strengths--making themselves uniquely valuable to their companies.

Considering Risk and Resilience in Decision-Making

Science.gov (United States)

Torres-Pomales, Wilfredo

2015-01-01

This paper examines the concepts of decision-making, risk analysis, uncertainty and resilience analysis. The relation between risk, vulnerability, and resilience is analyzed. The paper describes how complexity, uncertainty, and ambiguity are the most critical factors in the definition of the approach and criteria for decision-making. Uncertainty in its various forms is what limits our ability to offer definitive answers to questions about the outcomes of alternatives in a decision-making process. It is shown that, although resilience-informed decision-making would seem fundamentally different from risk-informed decision-making, this is not the case as resilience-analysis can be easily incorporated within existing analytic-deliberative decision-making frameworks.

Decision Making: The Underdeveloped Skill

Science.gov (United States)

Phelps, Robert

1974-01-01

Business educators should give students specific training in a methodology which will enable them to make logical, systematic, and rational decisions. Kepner-Tregoe Analysis (KTA), a decision making model, is described and illustrated with an example of a student buying his first car. (SC)

Biotechnology and Consumer Decision-Making.

Science.gov (United States)

Sax, Joanna K

Society is facing major challenges in climate change, health care and overall quality of life. Scientific advances to address these areas continue to grow, with overwhelming evidence that the application of highly tested forms of biotechnology is safe and effective. Despite scientific consensus in these areas, consumers appear reluctant to support their use. Research that helps to understand consumer decision-making and the public’s resistance to biotechnologies such as vaccines, fluoridated water programs and genetically engineered food, will provide great social value. This article is forward-thinking in that it suggests that important research in behavioral decision-making, specifically affect and ambiguity, can be used to help consumers make informed choices about major applications of biotechnology. This article highlights some of the most controversial examples: vaccinations, genetically engineered food, rbST treated dairy cows, fluoridated water, and embryonic stem cell research. In many of these areas, consumers perceive the risks as high, but the experts calculate the risks as low. Four major thematic approaches are proposed to create a roadmap for policymakers to consider for policy design and implementation in controversial areas of biotechnology. This article articulates future directions for studies that implement decision-making research to allow consumers to appropriately assign risk to their options and make informed decisions.

Decision making in urological surgery.

Science.gov (United States)

Abboudi, Hamid; Ahmed, Kamran; Normahani, Pasha; Abboudi, May; Kirby, Roger; Challacombe, Ben; Khan, Mohammed Shamim; Dasgupta, Prokar

2012-06-01

Non-technical skills are important behavioural aspects that a urologist must be fully competent at to minimise harm to patients. The majority of surgical errors are now known to be due to errors in judgment and decision making as opposed to the technical aspects of the craft. The authors reviewed the published literature regarding decision-making theory and in practice related to urology as well as the current tools available to assess decision-making skills. Limitations include limited number of studies, and the available studies are of low quality. Decision making is the psychological process of choosing between alternative courses of action. In the surgical environment, this can often be a complex balance of benefit and risk within a variable time frame and dynamic setting. In recent years, the emphasis of new surgical curriculums has shifted towards non-technical surgical skills; however, the assessment tools in place are far from objective, reliable and valid. Surgical simulators and video-assisted questionnaires are useful methods for appraisal of trainees. Well-designed, robust and validated tools need to be implemented in training and assessment of decision-making skills in urology. Patient safety can only be ensured when safe and effective decisions are made.

Making fictions sound real

DEFF Research Database (Denmark)

Langkjær, Birger

2010-01-01

This article examines the role that sound plays in making fictions perceptually real to film audiences, whether these fictions are realist or non-realist in content and narrative form. I will argue that some aspects of film sound practices and the kind of experiences they trigger are related...... to basic rules of human perception, whereas others are more properly explained in relation to how aesthetic devices, including sound, are used to characterise the fiction and thereby make it perceptually real to its audience. Finally, I will argue that not all genres can be defined by a simple taxonomy...... of sounds. Apart from an account of the kinds of sounds that typically appear in a specific genre, a genre analysis of sound may also benefit from a functionalist approach that focuses on how sounds can make both realist and non-realist aspects of genres sound real to audiences....

24 CFR 55.20 - Decision making process.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Decision making process. 55.20 Section 55.20 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development FLOODPLAIN MANAGEMENT Procedures for Making Determinations on Floodplain Management § 55.20 Decision making process. The decision making...

GROUPS DECISION MAKING WITHIN THE ORGANIZATION

Directory of Open Access Journals (Sweden)

Anca Stan

2008-12-01

Full Text Available In a highly global market, organizations that have the ability to analyze and rapidly respond to the constantly changing marketplace will have the greatest chance of remaining competitive and profitable. Group decision making is the process of arriving at a judgment based upon the feedback of multiple individuals. Due to the importance of the group decision making process, decision making models can be used to establish a systematic means of developing effective group decision making. Once a decision has been made, the members of the group should be willing to accept it and support its implementations.

Multi-disciplinary decision making in general practice.

Science.gov (United States)

Kirby, Ann; Murphy, Aileen; Bradley, Colin

2018-04-09

Purpose Internationally, healthcare systems are moving towards delivering care in an integrated manner which advocates a multi-disciplinary approach to decision making. Such an approach is formally encouraged in the management of Atrial Fibrillation patients through the European Society of Cardiology guidelines. Since the emergence of new oral anticoagulants switching between oral anticoagulants (OACs) has become prevalent. This case study considers the role of multi-disciplinary decision making, given the complex nature of the agents. The purpose of this paper is to explore Irish General Practitioners' (GPs) experience of switching between all OACs for Arial Fibrillation (AF) patients; prevalence of multi-disciplinary decision making in OAC switching decisions and seeks to determine the GP characteristics that appear to influence the likelihood of multi-disciplinary decision making. Design/methodology/approach A probit model is used to determine the factors influencing multi-disciplinary decision making and a multinomial logit is used to examine the factors influencing who is involved in the multi-disciplinary decisions. Findings Results reveal that while some multi-disciplinary decision-making is occurring (64 per cent), it is not standard practice despite international guidelines on integrated care. Moreover, there is a lack of patient participation in the decision-making process. Female GPs and GPs who have initiated prescriptions for OACs are more likely to engage in multi-disciplinary decision-making surrounding switching OACs amongst AF patients. GPs with training practices were less likely to engage with cardiac consultants and those in urban areas were more likely to engage with other (non-cardiac) consultants. Originality/value For optimal decision making under uncertainty multi-disciplinary decision-making is needed to make a more informed judgement and to improve treatment decisions and reduce the opportunity cost of making the wrong decision.

Dissolving decision making? : Models and their roles in decision-making processes and policy at large

NARCIS (Netherlands)

Zeiss, Ragna; van Egmond, S.

2014-01-01

This article studies the roles three science-based models play in Dutch policy and decision making processes. Key is the interaction between model construction and environment. Their political and scientific environments form contexts that shape the roles of models in policy decision making.

Students’ meaning-making and sense-making of vocational knowledge in Dutch senior secondary vocational education

NARCIS (Netherlands)

Nienke Bijlsma; Harmen Schaap; Prof.Dr. Elly de Bruijn

2016-01-01

Meaning-making and sense-making are generally assumed to be part of students’ personal vocational knowledge development, since they contribute to both students’ socialisation in a vocation and students’ personalisation of concepts, values and beliefs regarding that vocation. However, how students in

"When does making detailed predictions make predictions worse?": Correction to Kelly and Simmons (2016).

Science.gov (United States)

2016-10-01

Reports an error in "When Does Making Detailed Predictions Make Predictions Worse" by Theresa F. Kelly and Joseph P. Simmons ( Journal of Experimental Psychology: General , Advanced Online Publication, Aug 8, 2016, np). In the article, the symbols in Figure 2 were inadvertently altered in production. All versions of this article have been corrected. (The following abstract of the original article appeared in record 2016-37952-001.) In this article, we investigate whether making detailed predictions about an event worsens other predictions of the event. Across 19 experiments, 10,896 participants, and 407,045 predictions about 724 professional sports games, we find that people who made detailed predictions about sporting events (e.g., how many hits each baseball team would get) made worse predictions about more general outcomes (e.g., which team would win). We rule out that this effect is caused by inattention or fatigue, thinking too hard, or a differential reliance on holistic information about the teams. Instead, we find that thinking about game-relevant details before predicting winning teams causes people to give less weight to predictive information, presumably because predicting details makes useless or redundant information more accessible and thus more likely to be incorporated into forecasts. Furthermore, we show that this differential use of information can be used to predict what kinds of events will and will not be susceptible to the negative effect of making detailed predictions. PsycINFO Database Record (c) 2016 APA, all rights reserved

Making Black Bloody Rosella Jam

Directory of Open Access Journals (Sweden)

Ili Farhana

2016-08-01

Full Text Available The rosella (or roselle plant originated in West Africa, but has been cultivated throughout Africa, Asia and Australia. Not only can rosella be used to make teas and jams, but every part of the plant is edible; the young leaves can be eaten raw and make great salads. Rosella is a type of hibiscus, and it has a beautiful pink flower. Although the whole plant is edible, it is the calyx (the bright red fruit that is used to make syrups, teas or jams. If you eat it fresh, straight off the stalk, it has a sour taste. Inside the calyx is a round seed pod. If it is left to mature, it will turn brown. When dry it provides the mature seeds for the next planting. At Kebun Setaman Pejeng, our small-scale community arm and learning centre at Bamjar Panglan, Pejeng, on the island of Bali, we harvest rosella to make jam.

Neuroanatomical basis for recognition primed decision making.

Science.gov (United States)

Hudson, Darren

2013-01-01

Effective decision making under time constraints is often overlooked in medical decision making. The recognition primed decision making (RPDM) model was developed by Gary Klein based on previous recognized situations to develop a satisfactory solution to the current problem. Bayes Theorem is the most popular decision making model in medicine but is limited by the need for adequate time to consider all probabilities. Unlike other decision making models, there is a potential neurobiological basis for RPDM. This model has significant implication for health informatics and medical education.

Electroencephalogy (EEG) Feedback in Decision-Making

Science.gov (United States)

2015-08-26

Electroencephalogy ( EEG ) Feedback In Decision- Making The goal of this project is to investigate whether Electroencephalogy ( EEG ) can provide useful...feedback when training rapid decision-making. More specifically, EEG will allow us to provide online feedback about the neural decision processes...Electroencephalogy ( EEG ) Feedback In Decision-Making Report Title The goal of this project is to investigate whether Electroencephalogy ( EEG ) can provide useful

Toward a Psychology of Surrogate Decision Making.

Science.gov (United States)

Tunney, Richard J; Ziegler, Fenja V

2015-11-01

In everyday life, many of the decisions that we make are made on behalf of other people. A growing body of research suggests that we often, but not always, make different decisions on behalf of other people than the other person would choose. This is problematic in the practical case of legally designated surrogate decision makers, who may not meet the substituted judgment standard. Here, we review evidence from studies of surrogate decision making and examine the extent to which surrogate decision making accurately predicts the recipient's wishes, or if it is an incomplete or distorted application of the surrogate's own decision-making processes. We find no existing domain-general model of surrogate decision making. We propose a framework by which surrogate decision making can be assessed and a novel domain-general theory as a unifying explanatory concept for surrogate decisions. © The Author(s) 2015.

On de Sitter-like and Minkowski-like spacetimes

International Nuclear Information System (INIS)

Luebbe, Christian; Kroon, Juan Antonio Valiente

2009-01-01

Friedrich's proofs for the global existence results of de Sitter-like spacetimes and of semi-global existence of Minkowski-like spacetimes (Friedrich 1986 Commun. Math. Phys. 107 587) are re-examined and discussed, making use of the extended conformal field equations and a gauge based on conformal geodesics. In this gauge, the location of the conformal boundary of the spacetimes is known a priori once the initial data have been prescribed. Thus, it provides an analysis which is conceptually and calculationally simpler.

QUALITY ASSURANCE FOR CLOUD COMPUTING

OpenAIRE

Sumaira Aslam; Hina Shahid

2016-01-01

Cloud computing is a greatest and latest thing. Marketers for lots of big companies are all using cloud computing terms in their marketing campaign to make them seem them impressive so, that they can get clients and customers. Cloud computing is overall the philosophy and design concept and it is much more complicated and yet much simpler. The basic underlined thing that cloud computing do is to separate the applications from operating systems from the software from the hardware that runs eve...

Contextual Awareness for Robust Robot Autonomy

Science.gov (United States)

2013-12-30

above. We have tested this approach extensively with a simple “ pizza delivery” domain (must make the delivery in a given amount of time), where there...need to be solved only once, for each risk value. In tests, the augmented MDP failed only 7% less than our switching strategy (in the pizza delivery...a simpler pizza delivery domain (described in section 5.4). 86 5.1 Mario Domain The Super Mario Bros domain uses the Infinite Mario simu- lator 1

Control fast or control smart: When should invading pathogens be controlled?

Directory of Open Access Journals (Sweden)

Robin N Thompson

2018-02-01

Full Text Available The intuitive response to an invading pathogen is to start disease management as rapidly as possible, since this would be expected to minimise the future impacts of disease. However, since more spread data become available as an outbreak unfolds, processes underpinning pathogen transmission can almost always be characterised more precisely later in epidemics. This allows the future progression of any outbreak to be forecast more accurately, and so enables control interventions to be targeted more precisely. There is also the chance that the outbreak might die out without any intervention whatsoever, making prophylactic control unnecessary. Optimal decision-making involves continuously balancing these potential benefits of waiting against the possible costs of further spread. We introduce a generic, extensible data-driven algorithm based on parameter estimation and outbreak simulation for making decisions in real-time concerning when and how to control an invading pathogen. The Control Smart Algorithm (CSA resolves the trade-off between the competing advantages of controlling as soon as possible and controlling later when more information has become available. We show-using a generic mathematical model representing the transmission of a pathogen of agricultural animals or plants through a population of farms or fields-how the CSA allows the timing and level of deployment of vaccination or chemical control to be optimised. In particular, the algorithm outperforms simpler strategies such as intervening when the outbreak size reaches a pre-specified threshold, or controlling when the outbreak has persisted for a threshold length of time. This remains the case even if the simpler methods are fully optimised in advance. Our work highlights the potential benefits of giving careful consideration to the question of when to start disease management during emerging outbreaks, and provides a concrete framework to allow policy-makers to make this decision.

Control fast or control smart: When should invading pathogens be controlled?

Science.gov (United States)

Thompson, Robin N; Gilligan, Christopher A; Cunniffe, Nik J

2018-02-01

The intuitive response to an invading pathogen is to start disease management as rapidly as possible, since this would be expected to minimise the future impacts of disease. However, since more spread data become available as an outbreak unfolds, processes underpinning pathogen transmission can almost always be characterised more precisely later in epidemics. This allows the future progression of any outbreak to be forecast more accurately, and so enables control interventions to be targeted more precisely. There is also the chance that the outbreak might die out without any intervention whatsoever, making prophylactic control unnecessary. Optimal decision-making involves continuously balancing these potential benefits of waiting against the possible costs of further spread. We introduce a generic, extensible data-driven algorithm based on parameter estimation and outbreak simulation for making decisions in real-time concerning when and how to control an invading pathogen. The Control Smart Algorithm (CSA) resolves the trade-off between the competing advantages of controlling as soon as possible and controlling later when more information has become available. We show-using a generic mathematical model representing the transmission of a pathogen of agricultural animals or plants through a population of farms or fields-how the CSA allows the timing and level of deployment of vaccination or chemical control to be optimised. In particular, the algorithm outperforms simpler strategies such as intervening when the outbreak size reaches a pre-specified threshold, or controlling when the outbreak has persisted for a threshold length of time. This remains the case even if the simpler methods are fully optimised in advance. Our work highlights the potential benefits of giving careful consideration to the question of when to start disease management during emerging outbreaks, and provides a concrete framework to allow policy-makers to make this decision.

Decision-making in the adolescent brain.

Science.gov (United States)

Blakemore, Sarah-Jayne; Robbins, Trevor W

2012-09-01

Adolescence is characterized by making risky decisions. Early lesion and neuroimaging studies in adults pointed to the ventromedial prefrontal cortex and related structures as having a key role in decision-making. More recent studies have fractionated decision-making processes into its various components, including the representation of value, response selection (including inter-temporal choice and cognitive control), associative learning, and affective and social aspects. These different aspects of decision-making have been the focus of investigation in recent studies of the adolescent brain. Evidence points to a dissociation between the relatively slow, linear development of impulse control and response inhibition during adolescence versus the nonlinear development of the reward system, which is often hyper-responsive to rewards in adolescence. This suggests that decision-making in adolescence may be particularly modulated by emotion and social factors, for example, when adolescents are with peers or in other affective ('hot') contexts.

A qualitative study on community pharmacists' decision-making process when making a diagnosis.

Science.gov (United States)

Sinopoulou, Vassiliki; Summerfield, Paul; Rutter, Paul

2017-12-01

Self-care policies are increasingly directing patients to seek advice from community pharmacists. This means pharmacists need to have sound diagnostic decision-making skills to enable them to recognise a variety of conditions. The aim of this study was to investigate the process by which pharmacists manage patient signs and symptoms and to explore their use of decision-making for diagnostic purposes. Data were collected through semi-structured, face-to-face interviews with community pharmacists working in England, between August 2013 and November 2014. Pharmacists were asked to share their experiences on how they performed patient consultations, and more specifically how they would approach a hypothetical headache scenario. As part of the interview, their sources of knowledge and experience were also explored. Framework analysis was used to identify themes and subthemes. Eight interviews were conducted with pharmacists who had a wide range of working practice, from 1 year through to 40 years of experience. The pharmacists' main motivations during consultations were product selection and risk minimisation. Their questioning approach and decision-making relied heavily on mnemonic methods. This led to poor quality information gathering-although pharmacists acknowledged they needed to "delve deeper" but were often unable to articulate how or why. Some pharmacists exhibited elements of clinical reasoning in their consultations, but this seemed, mostly, to be unconscious and subsequently applied inappropriately. Overall, pharmacists exhibited poor decision-making ability, and often decisions were based on personal belief and experiences rather than evidence. Community pharmacists relied heavily on mnemonic methods to manage patients' signs and symptoms with diagnosis-based decision-making being seldom employed. These findings suggest practicing pharmacists should receive more diagnostic training. © 2017 John Wiley & Sons, Ltd.

[Cognitive errors in diagnostic decision making].

Science.gov (United States)

Gäbler, Martin

2017-10-01

Approximately 10-15% of our diagnostic decisions are faulty and may lead to unfavorable and dangerous outcomes, which could be avoided. These diagnostic errors are mainly caused by cognitive biases in the diagnostic reasoning process.Our medical diagnostic decision-making is based on intuitive "System 1" and analytical "System 2" diagnostic decision-making and can be deviated by unconscious cognitive biases.These deviations can be positively influenced on a systemic and an individual level. For the individual, metacognition (internal withdrawal from the decision-making process) and debiasing strategies, such as verification, falsification and rule out worst-case scenarios, can lead to improved diagnostic decisions making.

Moral and Ethical Decision Making: Literature Review

Science.gov (United States)

2005-08-08

exploration and elaboration of both rational and intuitive decision making processes. In addition, emotions may also play an important role in...More specifically, it suggests that both rational and intuitive decision making processes are likely to play an important role in ethical decision ...and military literature related to ethical decision making more generally. Specifically, it suggests that both rational and intuitive decision making

Modeling Human Elements of Decision-Making

Science.gov (United States)

2002-06-01

include factors such as personality, emotion , and level of expertise, which vary from individual to individual. The process of decision - making during... rational choice theories such as utility theory, to more descriptive psychological models that focus more on the process of decision - making ...descriptive nature, they provide a more realistic representation of human decision - making than the rationally based models. However these models do

Understanding Optimal Decision-making in Wargaming

OpenAIRE

Nesbitt, P; Kennedy, Q; Alt, JK; Fricker, RD; Whitaker, L; Yang, J; Appleget, JA; Huston, J; Patton, S

2013-01-01

Approved for public release; distribution is unlimited. This research aims to gain insight into optimal wargaming decision-making mechanisms using neurophysiological measures by investigating whether brain activation and visual scan patterns predict attention, perception, and/or decision-making errors through human-in-the-loop wargaming simulation experiments. We investigate whether brain activity and visual scan patterns can explain optimal wargaming decision making and its devel...

Multinational Corporate Strategy-making

DEFF Research Database (Denmark)

Andersen, Torben Juul; Andersson, Ulf

2017-01-01

from corporate headquarters. The model considers local subsidiary actions of both operational and strategic nature and we argue that it may be futile to distinguish between these effects as incremental operational responses can cumulate into more substantial changes over time with dimensions...... the complementary effects of central planning and decentralized decision-making. We present and synthesize these rather field specific perspectives and try to synthesize insights from both fields in an adaptive strategy-making model including the effects of autonomous subsidiary initiatives and intended mandates...

In search of standards to support circularity in product policies: A systematic approach.

Science.gov (United States)

Tecchio, Paolo; McAlister, Catriona; Mathieux, Fabrice; Ardente, Fulvio

2017-12-01

The aspiration of a circular economy is to shift material flows toward a zero waste and pollution production system. The process of shifting to a circular economy has been initiated by the European Commission in their action plan for the circular economy. The EU Ecodesign Directive is a key policy in this transition. However, to date the focus of access to market requirements on products has primarily been upon energy efficiency. The absence of adequate metrics and standards has been a key barrier to the inclusion of resource efficiency requirements. This paper proposes a framework to boost sustainable engineering and resource use by systematically identifying standardization needs and features. Standards can then support the setting of appropriate material efficiency requirements in EU product policy. Three high-level policy goals concerning material efficiency of products were identified: embodied impact reduction, lifetime extension and residual waste reduction. Through a lifecycle perspective, a matrix of interactions among material efficiency topics (recycled content, re-used content, relevant material content, durability, upgradability, reparability, re-manufacturability, reusability, recyclability, recoverability, relevant material separability) and policy goals was created. The framework was tested on case studies for electronic displays and washing machines. For potential material efficiency requirements, specific standardization needs were identified, such as adequate metrics for performance measurements, reliable and repeatable tests, and calculation procedures. The proposed novel framework aims to provide a method by which to identify key material efficiency considerations within the policy context, and to map out the generic and product-specific standardisation needs to support ecodesign. Via such an approach, many different stakeholders (industry, academics, policy makers, non-governmental organizations etc.) can be involved in material efficiency

Students' Meaning-Making and Sense-Making of Vocational Knowledge in Dutch Senior Secondary Vocational Education

Science.gov (United States)

Bijlsma, Nienke; Schaap, Harmen; de Bruijn, Elly

2016-01-01

Meaning-making and sense-making are generally assumed to be part of students' personal vocational knowledge development, since they contribute to both students' socialisation in a vocation and students' personalisation of concepts, values and beliefs regarding that vocation. However, how students in vocational education acquire meaning and make…

Distributed Cognition in Cancer Treatment Decision Making: An Application of the DECIDE Decision-Making Styles Typology.

Science.gov (United States)

Krieger, Janice L; Krok-Schoen, Jessica L; Dailey, Phokeng M; Palmer-Wackerly, Angela L; Schoenberg, Nancy; Paskett, Electra D; Dignan, Mark

2017-07-01

Distributed cognition occurs when cognitive and affective schemas are shared between two or more people during interpersonal discussion. Although extant research focuses on distributed cognition in decision making between health care providers and patients, studies show that caregivers are also highly influential in the treatment decisions of patients. However, there are little empirical data describing how and when families exert influence. The current article addresses this gap by examining decisional support in the context of cancer randomized clinical trial (RCT) decision making. Data are drawn from in-depth interviews with rural, Appalachian cancer patients ( N = 46). Analysis of transcript data yielded empirical support for four distinct models of health decision making. The implications of these findings for developing interventions to improve the quality of treatment decision making and overall well-being are discussed.

Emotional Intelligence and Decision Making

Directory of Open Access Journals (Sweden)

A M Kustubayeva

2011-12-01

Full Text Available The results of the experimental research of the connection between the efficiency of decision making and emotional intelligence are presented in the article. The empirical data indicate that the ability to regulate emotion is an important indicator of the efficiency of decision making in the conditions of psychological experiment.

Methods of making textured catalysts

Science.gov (United States)

Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

2010-08-17

A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

Impaired decision making among morbidly obese adults.

LENUS (Irish Health Repository)

Brogan, Amy

2011-02-01

The Iowa Gambling Task (IGT) measures affective decision making and has revealed decision making impairments across a wide range of eating disorders. This study aimed to investigate affective decision making in severely obese individuals.

How do small groups make decisions?

OpenAIRE

Chahine, Saad; Cristancho, Sayra; Padgett, Jessica; Lingard, Lorelei

2017-01-01

In the competency-based medical education (CBME) approach, clinical competency committees are responsible for making decisions about trainees? competence. However, we currently lack a?theoretical model for group decision-making to inform this emerging assessment phenomenon. This paper proposes an organizing framework to study and guide the decision-making processes of clinical competency committees. This is an explanatory, non-exhaustive review, tailored to identify relevant theoretical and e...

Judgment and decision making.

Science.gov (United States)

Fischhoff, Baruch

2010-09-01

The study of judgment and decision making entails three interrelated forms of research: (1) normative analysis, identifying the best courses of action, given decision makers' values; (2) descriptive studies, examining actual behavior in terms comparable to the normative analyses; and (3) prescriptive interventions, helping individuals to make better choices, bridging the gap between the normative ideal and the descriptive reality. The research is grounded in analytical foundations shared by economics, psychology, philosophy, and management science. Those foundations provide a framework for accommodating affective and social factors that shape and complement the cognitive processes of decision making. The decision sciences have grown through applications requiring collaboration with subject matter experts, familiar with the substance of the choices and the opportunities for interventions. Over the past half century, the field has shifted its emphasis from predicting choices, which can be successful without theoretical insight, to understanding the processes shaping them. Those processes are often revealed through biases that suggest non-normative processes. The practical importance of these biases depends on the sensitivity of specific decisions and the support that individuals have in making them. As a result, the field offers no simple summary of individuals' competence as decision makers, but a suite of theories and methods suited to capturing these sensitivities. Copyright © 2010 John Wiley & Sons, Ltd. For further resources related to this article, please visit the WIREs website. Copyright © 2010 John Wiley & Sons, Ltd.

Toward an Expanded Definition of Adaptive Decision Making.

Science.gov (United States)

Phillips, Susan D.

1997-01-01

Uses the lifespan, life-space model to examine the definition of adaptive decision making. Reviews the existing definition of adaptive decision making as "rational" decision making and offers alternate perspectives on decision making with an emphasis on the implications of using the model. Makes suggestions for future theory, research,…

The functional neuroanatomy of decision-making.

Science.gov (United States)

Rosenbloom, Michael H; Schmahmann, Jeremy D; Price, Bruce H

2012-01-01

Decision-making is a complex executive function that draws on past experience, present goals, and anticipation of outcome, and which is influenced by prevailing and predicted emotional tone and cultural context. Functional imaging investigations and focal lesion studies identify the orbitofrontal, anterior cingulate, and dorsolateral prefrontal cortices as critical to decision-making. The authors review the connections of these prefrontal regions with the neocortex, limbic system, basal ganglia, and cerebellum, highlight current ideas regarding the cognitive processes of decision-making that these networks subserve, and present a novel integrated neuroanatomical model for decision-making. Finally, clinical relevance of this circuitry is illustrated through a discussion of frontotemporal dementia, traumatic brain injury, and sociopathy.

Update of the INPRO Collaborative Project, Proliferation Resistance and Safeguard ability Assessment (Prosta) Tools

Energy Technology Data Exchange (ETDEWEB)

Chang, H. L.; Kwon, E. H.; Ahn, S. K.; Ko, W. I.; Kim, H. D. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The objectives of the INPRO Collaborative Project, Proliferation Resistance and Safeguard ability Assessment (PROSA) Tools are to make the INPRO proliferation resistance (PR) assessment methodology simpler and easier to use, to allow for different users and depths of analysis, to demonstrate the value and its usefulness of the refined assessment methodology to potential users, through a test with a reference case, and to provide input to a revision of the INPRO PR assessment manual. A summary of the project is described herein, including the procedure of PR assessment process and a case study using a SFR metal fuel manufacturing facility (SFMF) which is currently in the conceptual design phase at KAERI. The PROSA process with questionnaire approach is simpler and easier to perform that the original INPRO PR methodology with qualitative scale from 'weak' to 'very strong' to be determined by expert judgment. The PROSA process can be applied from the early stage of design showing the relationship of PR assessment to the SBD process.

Sense-making and Impact Assessment

DEFF Research Database (Denmark)

Lyhne, Ivar

The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts.......The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts....

Decision Making Under Uncertain Categorization

Directory of Open Access Journals (Sweden)

Stephanie Ying-Fen Chen

2014-09-01

Full Text Available Two experiments investigated how category information is used in decision making under uncertainty and whether the framing of category information influences how it is used. Subjects were presented with vignettes in which the categorization of a critical item was ambiguous and were asked to choose among a set of actions with the goal of attaining the desired outcome for the main character in the story. The normative decision making strategy was to base the decision on all possible categories; however, research on a related topic, category-based induction, has found that people often only consider a single category when making predictions when categorization is uncertain. These experiments found that subjects tend to consider multiple categories when making decisions, but do so both when it is and is not appropriate, suggesting that use of multiple categories is not driven by an understanding of what categories are and are not relevant to the decision. Similarly, although a framing manipulation increased the rate of multiple-category use, it did so in situations in which multiple-category use was and was not appropriate.

Making sense of employer collectivism

DEFF Research Database (Denmark)

Ibsen, Christian Lyhne

2016-01-01

This conceptual article argues that preferences of employers for collective action cannot be reduced to rational actors making decisions based on market structures or institutional logics. Both markets and institutions are inherently ambiguous and employers therefore have to settle for plausible...... – rather than accurate – rational strategies among many alternatives through so-called sensemaking. Sensemaking refers to the process by which employers continuously make sense of their competitive environment by building causal stories of competitive advantages. The article therefore tries to provide......, unlike countries in similar situations, for example Finland and Sweden, Danish employers retained a coordinated industry-level bargaining system, which makes it an interesting paradox to study from the vantage point of sensemaking....

Cognitive-emotional decision making (CEDM): a framework of patient medical decision making.

Science.gov (United States)

Power, Tara E; Swartzman, Leora C; Robinson, John W

2011-05-01

Assistance for patients faced with medical decisions has largely focussed on the clarification of information and personal values. Our aim is to draw on the decision research describing the role of emotion in combination with health behaviour models to provide a framework for conceptualizing patient decisions. A review of the psychological and medical decision making literature concerned with the role of emotion/affect in decision making and health behaviours. Emotion plays an influential role in decision making. Both current and anticipated emotions play a motivational role in choice. Amalgamating these findings with that of Leventhal's (1970) SRM provide a framework for thinking about the influence of emotion on a patient medical decision. Our framework suggests that a patient must cope with four sets of elements. The first two relate to the need to manage the cognitive and emotional aspects of the health threat. The second set relate to the management of the cognitive and emotional elements of the decision, itself. The framework provides a way for practitioners and researchers to frame thinking about a patient medical decision in order to assist the patient in clarifying decisional priorities. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Decision-making based on emotional images.

Science.gov (United States)

Katahira, Kentaro; Fujimura, Tomomi; Okanoya, Kazuo; Okada, Masato

2011-01-01

The emotional outcome of a choice affects subsequent decision making. While the relationship between decision making and emotion has attracted attention, studies on emotion and decision making have been independently developed. In this study, we investigated how the emotional valence of pictures, which was stochastically contingent on participants' choices, influenced subsequent decision making. In contrast to traditional value-based decision-making studies that used money or food as a reward, the "reward value" of the decision outcome, which guided the update of value for each choice, is unknown beforehand. To estimate the reward value of emotional pictures from participants' choice data, we used reinforcement learning models that have successfully been used in previous studies for modeling value-based decision making. Consequently, we found that the estimated reward value was asymmetric between positive and negative pictures. The negative reward value of negative pictures (relative to neutral pictures) was larger in magnitude than the positive reward value of positive pictures. This asymmetry was not observed in valence for an individual picture, which was rated by the participants regarding the emotion experienced upon viewing it. These results suggest that there may be a difference between experienced emotion and the effect of the experienced emotion on subsequent behavior. Our experimental and computational paradigm provides a novel way for quantifying how and what aspects of emotional events affect human behavior. The present study is a first step toward relating a large amount of knowledge in emotion science and in taking computational approaches to value-based decision making.

Decision making based on emotional images

Directory of Open Access Journals (Sweden)

Kentaro eKatahira

2011-10-01

Full Text Available The emotional outcome of a choice affects subsequent decision making. While the relationship between decision making and emotion has attracted attention, studies on emotion and decision making have been independently developed. In this study, we investigated how the emotional valence of pictures, which was stochastically contingent on participants’ choices, influenced subsequent decision making. In contrast to traditional value-based decision-making studies that used money or food as a reward, the reward value of the decision outcome, which guided the update of value for each choice, is unknown beforehand. To estimate the reward value of emotional pictures from participants’ choice data, we used reinforcement learning models that have success- fully been used in previous studies for modeling value-based decision making. Consequently, we found that the estimated reward value was asymmetric between positive and negative pictures. The negative reward value of negative pictures (relative to neutral pictures was larger in magnitude than the positive reward value of positive pictures. This asymmetry was not observed in valence for an individual picture, which was rated by the participants regarding the emotion experienced upon viewing it. These results suggest that there may be a difference between experienced emotion and the effect of the experienced emotion on subsequent behavior. Our experimental and computational paradigm provides a novel way for quantifying how and what aspects of emotional events affect human behavior. The present study is a first step toward relating a large amount of knowledge in emotion science and in taking computational approaches to value-based decision making.

Making Ceramic Cameras

Science.gov (United States)

Squibb, Matt

2009-01-01

This article describes how to make a clay camera. This idea of creating functional cameras from clay allows students to experience ceramics, photography, and painting all in one unit. (Contains 1 resource and 3 online resources.)

Affective Decision Making and the Ellsberg Paradox

OpenAIRE

Anat Bracha; Donald J. Brown

2008-01-01

Affective decision-making is a strategic model of choice under risk and uncertainty where we posit two cognitive processes -- the "rational" and the "emotional" process. Observed choice is the result of equilibrium in this intrapersonal game. As an example, we present applications of affective decision-making in insurance markets, where the risk perceptions of consumers are endogenous. We derive the axiomatic foundation of affective decision making, and show that affective decision making is ...

State-of-the-art of biodegradable composite materials

International Nuclear Information System (INIS)

Baley, Ch.; Grohens, Y.; Pillin, I.

2004-01-01

Nowadays, the market demand for environment friendly materials is in strong growth. The biodegradable composites (biodegradable fibres and polymers) mainly extracted from renewable resources will be a major contributor to the production of new industrial high performance products partially solving the problem of waste management. At the end of the lifetime, a structural bio-composite could be be crushed and recycled through a controlled industrial composting process. This the state-of-the-art report focuses on the biopolymers the vegetable fibres properties, the mechanisms of biodegradation and the examples of biodegradable composites. Eco-design of new products requires these new materials for which a life cycle analysis is nevertheless necessary to validate their environmental benefits. (authors)

Strategic Delegation of Environmental Policy Making

Energy Technology Data Exchange (ETDEWEB)

Roelfsema, H. [Utrecht University, Utrecht School of Economics, Vredenburg 138, 3511 BG Utrecht (Netherlands)

2004-04-15

A common claim is that nations should cooperate in environmental policy making. However, there is little empirical support that noncooperative decision making results in too low environmental standards and taxes. We develop a theoretical model and show that if the median voter cares sufficiently for the environment, she has an incentive to delegate policy making to a politician that cares more for the environment than she does herself. By doing so, she mitigates the 'race to the bottom' in environmental taxes. In contrast, if environmental policies are determined cooperatively with other countries, the median voter has an incentive to delegate policy making to a politician that cares less for the environment than she does herself, so as to free ride on international environmental agreements.

Decision-Making Autonomy and Subsidiary Innovation

DEFF Research Database (Denmark)

Van Vo, Dut; Beugelsdijk, Sjoerd; de Jong, Gjalt

2013-01-01

This paper investigates how decision-making autonomy affects the possibility and intensity of innovation in subsidiaries of multinational enterprises (MNEs). Subsidiaries are increasingly identified as sources of innovation and as vehicles for cross-border transfer of new competences. The question...... of how much decision-making autonomy subsidiaries should have is a core issue in the management of headquarters-subsidiary relationships. Using two complementary theoretical perspectives, we hypothesize a non-linear relationship between subsidiary’s decision-making autonomy and innovation. We test our...... hypothesis in a multi-country and multiindustry database based on survey evidence of 134 subsidiaries located in five Central and Eastern European countries from 23 home countries. The empirical results provide support for a non-linear U shaped relationship between subsidiary decision-making autonomy...

Decision-making in abnormal radiological situations

International Nuclear Information System (INIS)

Pretre, S.

1998-01-01

General problems associated with social impacts of radiology and decision making is discussed, as the main topics of the meeting. The problem of population is discussed living in areas contaminates with radioactive substances resulting from a major accident or from pest practices. This situation needs decision making process for initiating actions like relocation, resettlement or large-scale decontamination. The roles of various participants in this decision making process and in the communication with the public are considered. (R.P.)

Nuclear regulatory decision making

International Nuclear Information System (INIS)

2005-01-01

The fundamental objective of all nuclear safety regulatory bodies is to ensure that nuclear utilities operate their plants at all times in an acceptably safe manner. In meeting this objective, the regulatory body should strive to ensure that its regulatory decisions are technically sound, consistent from case to case, and timely. In addition, the regulator must be aware that its decisions and the circumstances surrounding those decisions can affect how its stakeholders, such as government policy makers, the industry it regulates, and the public, view it as an effective and credible regulator. In order to maintain the confidence of those stakeholders, the regulator should make sure that its decisions are transparent, have a clear basis in law and regulations, and are seen by impartial observers to be fair to all parties. Based on the work of a Nuclear Energy Agency (NEA) expert group, this report discusses some of the basic principles and criteria that a regulatory body should consider in making decisions and describes the elements of an integrated framework for regulatory decision making. (author)

Merging paradigms: Decision Making, Management, and Cognitive Control

DEFF Research Database (Denmark)

Rasmussen, Jens

1996-01-01

The paper discusses the trend in paradigms within decision research, drifting from concepts of decision making in terms of normative models of 'rational decision making, through behavioral models in terms of 'biases' - deviations from rational models, toward models of actual decision making...... behavior, such as the SRK concept, naturalistic decision making, and dynamic decision making.In this evolution, concepts such as decision making, management, and behavioral control merge and a concurrent change in concepts underlying design of systems aiming at control of behavior is visible, from...

Stereotype threat affects financial decision making.

Science.gov (United States)

Carr, Priyanka B; Steele, Claude M

2010-10-01

The research presented in this article provides the first evidence that one's decision making can be influenced by concerns about stereotypes and the devaluation of one's identity. Many studies document gender differences in decision making, and often attribute these differences to innate and stable factors, such as biological and hormonal differences. In three studies, we found that stereotype threat affected decision making and led to gender differences in loss-aversion and risk-aversion behaviors. In Study 1, women subjected to stereotype threat in academic and business settings were more loss averse than both men and women who were not facing the threat of being viewed in light of negative stereotypes. We found no gender differences in loss-aversion behavior in the absence of stereotype threat. In Studies 2a and 2b, we found the same pattern of effects for risk-aversion behavior that we had observed for loss-aversion behavior. In addition, in Study 2b, ego depletion mediated the effects of stereotype threat on women's decision making. These results suggest that individuals' decision making can be influenced by stereotype concerns.

Does future-oriented thinking predict adolescent decision making?

Science.gov (United States)

Eskritt, Michelle; Doucette, Jesslyn; Robitaille, Lori

2014-01-01

A number of theorists, as well as plain common sense, suggest that future-oriented thinking (FOT) should be involved in decision making; therefore, the development of FOT should be related to better quality decision making. FOT and quality of the decision making were measured in adolescents as well as adults in 2 different experiments. Though the results of the first experiment revealed an increase in quality of decision making across adolescence into adulthood, there was no relationship between FOT and decision making. In the second experiment, FOT predicted performance on a more deliberative decision-making task independent of age, but not performance on the Iowa Gambling Task (IGT). Performance on the IGT was instead related to emotion regulation. The study's findings suggest that FOT can be related to reflective decision making but not necessarily decision making that is more intuitive.

Argumentation and Multi-Agent Decision Making

OpenAIRE

Parsons, S.; Jennings, N. R.

1998-01-01

This paper summarises our on-going work on mixed- initiative decision making which extends both classical decision theory and a symbolic theory of decision making based on argumentation to a multi-agent domain.

Keeping brains young with making music.

Science.gov (United States)

Rogenmoser, Lars; Kernbach, Julius; Schlaug, Gottfried; Gaser, Christian

2018-01-01

Music-making is a widespread leisure and professional activity that has garnered interest over the years due to its effect on brain and cognitive development and its potential as a rehabilitative and restorative therapy of brain dysfunctions. We investigated whether music-making has a potential age-protecting effect on the brain. For this, we studied anatomical magnetic resonance images obtained from three matched groups of subjects who differed in their lifetime dose of music-making activities (i.e., professional musicians, amateur musicians, and non-musicians). For each subject, we calculated a so-called BrainAGE score which corresponds to the discrepancy (in years) between chronological age and the "age of the brain", with negative values reflecting an age-decelerating brain and positive values an age-accelerating brain, respectively. The index of "brain age" was estimated using a machine-learning algorithm that was trained in a large independent sample to identify anatomical correlates of brain-aging. Compared to non-musicians, musicians overall had lower BrainAGE scores, with amateur musicians having the lowest scores suggesting that music-making has an age-decelerating effect on the brain. Unlike the amateur musicians, the professional musicians showed a positive correlation between their BrainAGE scores and years of music-making, possibly indicating that engaging more intensely in just one otherwise enriching activity might not be as beneficial than if the activity is one of several that an amateur musician engages in. Intense music-making activities at a professional level could also lead to stress-related interferences and a less enriched environment than that of amateur musicians, possibly somewhat diminishing the otherwise positive effect of music-making.

Decision making regarding multifetal reduction.

Science.gov (United States)

Maifeld, Michelle; Hahn, Sandra; Titler, Marita G; Mullen, Meredithe

2003-01-01

To identify salient variables that influence decision making regarding multifetal reduction (MFR) and describe their effect on individuals over time. Prospective, exploratory, descriptive design, using qualitative and quantitative methods. Midwestern tertiary care center. A convenience sample of 11 consecutive consenting couples with triplet or higher-order pregnancies who elected to undergo MFR. Semistructured audiotaped telephone interviews at three points: (a) 2 weeks postreduction, (b) 6 weeks postpartum, and (c) 6 months postpartum; a demographic and marital adjustment questionnaire. Themes identified by content analysis and compared via matrix analysis between males and females and at three points in time; trends in marital adjustment. Dominant variables influencing MFR decision making were risks associated with higher-order pregnancies and preservation of infants' and mothers' health. Most participants identified emotional issues, including moral and ethical dilemmas, as the most difficult aspect of reduction. Over time, participants reported feeling more positive about their decision; nonetheless, negative feelings emerged progressively. Risk aversion favored MFR decision making. Yet, both making and living with the decision were emotionally difficult for this sample. Interventions are needed to assist couples with this decision and its consequences.

Computational Complexity and Human Decision-Making.

Science.gov (United States)

Bossaerts, Peter; Murawski, Carsten

2017-12-01

The rationality principle postulates that decision-makers always choose the best action available to them. It underlies most modern theories of decision-making. The principle does not take into account the difficulty of finding the best option. Here, we propose that computational complexity theory (CCT) provides a framework for defining and quantifying the difficulty of decisions. We review evidence showing that human decision-making is affected by computational complexity. Building on this evidence, we argue that most models of decision-making, and metacognition, are intractable from a computational perspective. To be plausible, future theories of decision-making will need to take into account both the resources required for implementing the computations implied by the theory, and the resource constraints imposed on the decision-maker by biology. Copyright © 2017 Elsevier Ltd. All rights reserved.

A microprocessor-based gamma-ray spectrometer with gain stabilized single-channel analyzers

International Nuclear Information System (INIS)

Borg, P.J.; Huppert, P.; Phillips, P.L.; Waddington, P.J.

1985-01-01

The design and performance of a self-contained microprocessor-based gamma-ray spectrometer for use in geophysical measurements using nuclear techniques is described. The instrument uses single-channel analyzers which are inherently simpler and faster than the Wilkinson or successive approximation ADC. A novel technique of gain stabilization together with a simple means of energy calibration has been developed. The modular design of the equipment makes it suitable for multidetector usage, required in a number of nucleonic gauges for the quantitative measurement of chemical constituents. (orig.)

RNA Nanostructures – Methods and Protocols | Center for Cancer Research

Science.gov (United States)

RNA nanotechnology is a young field with many potential applications. The goal is to utilize designed RNA strands, such that the obtained constructs have specific properties in terms of shape and functionality. RNA has potential functionalities that are comparable to that of proteins, but possesses (compared to proteins) simpler design principles akin to DNA. The promise is that designed RNA complexes may make possible novel types of molecular assemblies with applications in medicine (as therapeutics or diagnostics), material science, imaging, structural biology, and basic research.

Developing an iPhone application with focus on the user interface

OpenAIRE

Kannan, Naryanan

2012-01-01

Smartphones are becoming increasingly popular day by day. The reason why they are called ‘Smart phones’ is that they can perform advanced computing and have a better connectivity to the Internet. Smartphones usually run a complete operating system. For example, iOS runs on Apple Inc.’s mobile devices like iPhone, iPod Touch and iPad [1]. A Smartphone allows the user to run applications. These applications are aimed at making life simpler for the users. This Master Thesis aims at developing on...

Product-related top runner approach at EU level; Grundkonzeption eines produktbezogenen Top-Runner-Modells auf der EU-Ebene

Energy Technology Data Exchange (ETDEWEB)

Jepsen, Dirk; Reintjes, Norbert [Institut fuer Oekologie und Politik GmbH (OEKOPOL), Hamburg (Germany); Rubik, Frieder; Stecker, Rebecca; Engel, Florian; Eisenhauer, Patrik [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany); Schomerus, Thomas; Spengler, Laura [Leuphana Univ., Lueneburg (Germany)

2011-06-15

This publication shows that the environmental ministers of the EU member states are largely agreed that a new generation of green legislation with dynamic standards is needed in order to create strong incentives for resource-efficient innovation. The German Federal Government has recognised the potential of this approach and is making a political drive for the introduction of a top-runner promotion scheme at EU level. A scheme of the same kind has also been incorporated in Germany's energy efficiency action plan. The top runner promotion scheme is a system of requirements and incentives for the promotion of the best and most efficient products on the market. It can also serve as a guiding model for product-related environmental protection in Germany. In its general considerations of the interaction between community law and national law in the implementation of the top runner promotion scheme on the basis of the Ecodesign Directive and in a special analysis based on the example of boilers and small-scale firing installations the present study shows that there is a trend of steady curtailment of the legislator's scope of influence. If any national scope for product-related regulation does still exist, then only in niches, but not in a manner that would permit the legal implementation of broad concepts.

Computer Graphics and Administrative Decision-Making.

Science.gov (United States)

Yost, Michael

1984-01-01

Reduction in prices now makes it possible for almost any institution to use computer graphics for administrative decision making and research. Current and potential uses of computer graphics in these two areas are discussed. (JN)

Authentic Montessori: The Teacher Makes the Difference

Science.gov (United States)

Huxel, Alexa C.

2013-01-01

What are the elements that make up authentic Montessori? Is Montessori something concrete or abstract? Are there intangibles that make Montessori what it is? Many classrooms today have Montessori materials and small tables and chairs. Are they authentic Montessori? When examining areas that traditionally make defining authentic Montessori…

Learning to Make Decisions Through Constructive Controversy.

Science.gov (United States)

Tjosvold, Dean

Students must make decisions about their lifestyle, future careers, academic pursuits, and classroom and school issues. Learning to make effective decisions for themselves and for society is an important aspect of competence. They can learn decision making through interacting and solving problems with others. A central ingredient for successful…

Decision Making with Imperfect Decision Makers

CERN Document Server

Guy, Tatiana Valentine; Wolpert, David H

2012-01-01

Prescriptive Bayesian decision making has reached a high level of maturity and is well-supported algorithmically. However, experimental data shows that real decision makers choose such Bayes-optimal decisions surprisingly infrequently, often making decisions that are badly sub-optimal. So prevalent is such imperfect decision-making that it should be accepted as an inherent feature of real decision makers living within interacting societies. To date such societies have been investigated from an economic and gametheoretic perspective, and even to a degree from a physics perspective. However, lit

Making sense of shared sense-making in an inquiry-based science classroom: Toward a sociocultural theory of mind

Science.gov (United States)

Ladewski, Barbara G.

Despite considerable exploration of inquiry and reflection in the literatures of science education and teacher education/teacher professional development over the past century, few theoretical or analytical tools exist to characterize these processes within a naturalistic classroom context. In addition, little is known regarding possible developmental trajectories for inquiry or reflection---for teachers or students---as these processes develop within a classroom context over time. In the dissertation, I use a sociocultural lens to explore these issues with an eye to the ways in which teachers and students develop shared sense-making, rather than from the more traditional perspective of individual teacher activity or student learning. The study includes both theoretical and empirical components. Theoretically, I explore the elaborations of sociocultural theory needed to characterize teacher-student shared sense-making as it develops within a classroom context, and, in particular, the role of inquiry and reflection in that sense-making. I develop a sociocultural model of shared sense-making that attempts to represent the dialectic between the individual and the social, through an elaboration of existing sociocultural and psychological constructs, including Vygotsky's zone of proximal development and theory of mind. Using this model as an interpretive framework, I develop a case study that explores teacher-student shared sense-making within a middle-school science classroom across a year of scaffolded introduction to inquiry-based science instruction. The empirical study serves not only as a test case for the theoretical model, but also informs our understanding regarding possible developmental trajectories and important mechanisms supporting and constraining shared sense-making within inquiry-based science classrooms. Theoretical and empirical findings provide support for the idea that perspectival shifts---that is, shifts of point-of-view that alter relationships

Pulmonary artery occlusion pressure estimation by transesophageal echocardiography: is simpler better?

Science.gov (United States)

Voga, Gorazd

2008-01-01

The measurement of pulmonary artery occlusion pressure (PAOP) is important for estimation of left ventricular filling pressure and for distinction between cardiac and non-cardiac etiology of pulmonary edema. Clinical assessment of PAOP, which relies on physical signs of pulmonary congestion, is uncertain. Reliable PAOP measurement can be performed by pulmonary artery catheter, but it is possible also by the use of echocardiography. Several Doppler variables show acceptable correlation with PAOP and can be used for its estimation in cardiac and critically ill patients. Noninvasive PAOP estimation should probably become an integral part of transthoracic and transesophageal echocardiographic evaluation in critically ill patients. However, the limitations of both methods should be taken into consideration, and in specific patients invasive PAOP measurement is still unavoidable, if the exact value of PAOP is needed.

High-Energy Chemistry of Formamide: A Simpler Way for Nucleobase Formation

Czech Academy of Sciences Publication Activity Database

Ferus, Martin; Michalčíková, Regina; Shestivska, Violetta; Šponer, Jiří; Šponer, Judit E.; Civiš, Svatopluk

2014-01-01

Roč. 118, č. 4 (2014), s. 719-736 ISSN 1089-5639 R&D Projects: GA ČR GAP208/10/2302; GA MŠk LM2010014 Institutional support: RVO:61388955 ; RVO:68081707 Keywords : HIGH-POWER LASER * TRANSFORM EMISSION-SPECTROSCOPY * INDUCED DIELECTRIC-BREAKDOWN Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.693, year: 2014

Cheaper, simpler, and better: tips for treating seniors with Parkinson disease.

Science.gov (United States)

Ahlskog, J Eric

2011-12-01

Treatment of seniors with Parkinson disease is within the domain of primary care physicians and internists. A good working knowledge of carbidopa/levodopa principles should allow excellent care of most patients, at least during the early years of the disease. Even later, when levodopa responses become more complicated (eg, dyskinesias, motor fluctuations, insomnia, anxiety), levodopa adjustments may be all that is necessary. A dozen tips for optimizing treatment of Parkinson disease are discussed herein.

Supination external rotation ankle fractures: A simpler pattern with better outcomes

Science.gov (United States)

Tejwani, Nirmal C; Park, Ji Hae; Egol, Kenneth A

2015-01-01

Background: Rotational injuries are the most common and usually classified as per the Lauge Hansen classification; with the most common subgroup being the supination external rotation (SER) mechanism. Isolated fractures of the distal fibula (SE2) without associated ligamentous injury are usually treated with a splint or brace and the patient may be allowed to weight bear as tolerated. This study reports the functional outcomes following a stable, low energy, rotational ankle fracture supination external rotation (SER2) when compared to unstable SER4 fractures treated operatively. Materials and Methods: 64 patients who were diagnosed and treated nonoperatively for a stable SER2 ankle fracture were followed prospectively. In the comparison group, 93 operatively treated fibular fractures were extracted from a prospectively collected database and evaluated comparison. Baseline characteristics obtained by trained interviewers at the time of injury included: Patient demographics, short form-36, short musculoskeletal functional assessment (SMFA) and American Orthopedic Foot and Ankle Society (AOFAS) questionnaires. Patients were followed at 3, 6 and 12 months postsurgery. Additional information obtained at each followup point included any complications or evidence on fracture healing. Data were analyzed by the Student's t-test and theFisher's Exact Test to compare demographic and functional outcomes between the two cohorts. P fracture cohort was 43 versus 45 in the SER4 group. Nearly 64% of the patient population was female when compared with 37% in the operative group. In the SER2 by 6 months all patients had returned to baseline functional status. There were 18 delayed unions (all healed by 6 months). Based on the functional outcome scores all patients had returned to preoperative level. In comparison, SE4 patients had less functional recovery at 3 and 6 months (P delayed unions. Conclusions: An SER2 ankle fracture is a relatively benign injury with functional limitations resolving by 3 months while the need for surgical fixation in SER ankle fractures appears to affect lower extremity function to a greater degree for a longer time period. Patients should be counseled as to these expected outcomes. PMID:26015612

Simpler Adaptive Optics using a Single Device for Processing and Control

Science.gov (United States)

Zovaro, A.; Bennet, F.; Rye, D.; D'Orgeville, C.; Rigaut, F.; Price, I.; Ritchie, I.; Smith, C.

The management of low Earth orbit is becoming more urgent as satellite and debris densities climb, in order to avoid a Kessler syndrome. A key part of this management is to precisely measure the orbit of both active satellites and debris. The Research School of Astronomy and Astrophysics at the Australian National University have been developing an adaptive optics (AO) system to image and range orbiting objects. The AO system provides atmospheric correction for imaging and laser ranging, allowing for the detection of smaller angular targets and drastically increasing the number of detectable objects. AO systems are by nature very complex and high cost systems, often costing millions of dollars and taking years to design. It is not unusual for AO systems to comprise multiple servers, digital signal processors (DSP) and field programmable gate arrays (FPGA), with dedicated tasks such as wavefront sensor data processing or wavefront reconstruction. While this multi-platform approach has been necessary in AO systems to date due to computation and latency requirements, this may no longer be the case for those with less demanding processing needs. In recent years, large strides have been made in FPGA and microcontroller technology, with todays devices having clock speeds in excess of 200 MHz whilst using a 1kHz) with low latency (general AO applications, such as in 1-3 m telescopes for space surveillance, or even for amateur astronomy.

Use of experimental ecosystems in regulatory decision making

Science.gov (United States)

La Point, Thomas W.; Perry, James A.

1989-09-01

Tiered testing for the effects of chemicals on aquatic ecosystems has begun to include tests at the ecosystem level as a component in pesticide regristration. Because such tests are expensive, regulators and industry need to know what additional information they can gain from such tests relative to the costs of the simpler single-species toxicity bioassays. Requirements for ecosystem-level testing have developed because resource managers have not fully understood the implications of potential damage to resources without having evaluations of the predicted impacts under field conditions. We review approaches taken in the use of experimental ecosystems, discuss benefits and limitations of small- and large-scale ecosystem tests, and point to correlative approaches between laboratory and field toxicity testing. Laboratory experimental ecosystems (microcosms) have been successfully used to measure contaminant bioavailability, to determine routes of uptake in moderately complex aquatic systems, and to isolate factors modifying contaminant uptake into the biota. Such factors cannot be as readily studied in outdoor experimental ecosystems because direct cause-and-effect relations are often confounded and difficult to isolate. However, laboratory tests can be designed to quantify the relations among three variables: known concentrations of Stressors; specific sublethal behavioral, biochemical, and physiological effects displayed by organisms; and responses that have been observed in ecosystem-level analyses. For regulatory purposes, the specificity of test results determines how widely they can be applied. Ecotoxicological research should be directed at attempts to identify instances where single-species testing would be the appropriate level of analysis for identifying critical ecological endpoints and for clarifying relationships between ecosystem structure and function, and where it would be inadequate for a given level of analysis.

Making the case for evidence-based design in healthcare: a descriptive case study of organizational decision making.

Science.gov (United States)

Shoemaker, Lorie K; Kazley, Abby Swanson; White, Andrea

2010-01-01

The aim of this study was to describe the organizational decision-making process used in the selection of evidence-based design (EBD) concepts, the criteria used to make these decisions, and the extent to which leadership style may have influenced the decision-making process. Five research questions were formulated to frame the direction of this study, including: (1) How did healthcare leaders learn of innovations in design? (2) How did healthcare leaders make decisions in the selection of healthcare design concepts? (3) What criteria did healthcare leaders use in the decision-making process? (4) How did healthcare leaders consider input from the staff in design decisions? and (5) To what extent did the leadership style of administrators affect the outcomes of the decision-making process? Current issues affecting healthcare in the community led the principal investigator's organization to undertake an ambitious facilities expansion project. As part of its planning process, the organization learned of EBD principles that seemingly had a positive impact on patient care and safety and staff working conditions. Although promising, a paucity of empirical research addressed the cost/benefit of incorporating many EBD concepts into one hospital setting, and there was no research that articulated the organizational decision-making process used by healthcare administrators when considering the use of EBD in expansion projects. A mixed-method, descriptive, qualitative, single-case study and quantitative design were used to address the five research questions. The Systems Research Organizing Model provided the theoretical framework. A variety of data collection methods was used, including interviews of key respondents, the review of documentary evidence, and the Multifactor Leadership Questionnaire. A participatory process was used throughout the design decision phases, involving staff at all levels of the organization. The Internet and architects facilitated learning about

Strategic decision making

NARCIS (Netherlands)

Stokman, Frans N.; Assen, Marcel A.L.M. van; Knoop, Jelle van der; Oosten, Reinier C.H. van

2000-01-01

This paper introduces a methodology for strategic intervention in collective decision making.The methodology is based on (1) a decomposition of the problem into a few main controversial issues, (2) systematic interviews of subject area specialists to obtain a specification of the decision

What Makes Organization?

DEFF Research Database (Denmark)

Boll, Karen

This article investigates a segmentation model used by the Danish Tax and Customs Administration to classify businesses’ motivational postures. The article uses two different conceptualizations of performativity to analyze what the model’s segmentations do; Hacking’s idea of making up people...

44 CFR 9.6 - Decision-making process.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Decision-making process. 9.6... HOMELAND SECURITY GENERAL FLOODPLAIN MANAGEMENT AND PROTECTION OF WETLANDS § 9.6 Decision-making process... protection decision-making process to be followed by the Agency in applying the Orders to its actions. While...

Clinical decision-making: physicians' preferences and experiences

Directory of Open Access Journals (Sweden)

White Martha

2007-03-01

Full Text Available Abstract Background Shared decision-making has been advocated; however there are relatively few studies on physician preferences for, and experiences of, different styles of clinical decision-making as most research has focused on patient preferences and experiences. The objectives of this study were to determine 1 physician preferences for different styles of clinical decision-making; 2 styles of clinical decision-making physicians perceive themselves as practicing; and 3 the congruence between preferred and perceived style. In addition we sought to determine physician perceptions of the availability of time in visits, and their role in encouraging patients to look for health information. Methods Cross-sectional survey of a nationally representative sample of U.S. physicians. Results 1,050 (53% response rate physicians responded to the survey. Of these, 780 (75% preferred to share decision-making with their patients, 142 (14% preferred paternalism, and 118 (11% preferred consumerism. 87% of physicians perceived themselves as practicing their preferred style. Physicians who preferred their patients to play an active role in decision-making were more likely to report encouraging patients to look for information, and to report having enough time in visits. Conclusion Physicians tend to perceive themselves as practicing their preferred role in clinical decision-making. The direction of the association cannot be inferred from these data; however, we suggest that interventions aimed at promoting shared decision-making need to target physicians as well as patients.

The involvement of the striatum in decision making

Science.gov (United States)

Goulet-Kennedy, Julie; Labbe, Sara; Fecteau, Shirley

2016-01-01

Decision making has been extensively studied in the context of economics and from a group perspective, but still little is known on individual decision making. Here we discuss the different cognitive processes involved in decision making and its associated neural substrates. The putative conductors in decision making appear to be the prefrontal cortex and the striatum. Impaired decision-making skills in various clinical populations have been associated with activity in the prefrontal cortex and in the striatum. We highlight the importance of strengthening the degree of integration of both cognitive and neural substrates in order to further our understanding of decision-making skills. In terms of cognitive paradigms, there is a need to improve the ecological value of experimental tasks that assess decision making in various contexts and with rewards; this would help translate laboratory learnings into real-life benefits. In terms of neural substrates, the use of neuroimaging techniques helps characterize the neural networks associated with decision making; more recently, ways to modulate brain activity, such as in the prefrontal cortex and connected regions (eg, striatum), with noninvasive brain stimulation have also shed light on the neural and cognitive substrates of decision making. Together, these cognitive and neural approaches might be useful for patients with impaired decision-making skills. The drive behind this line of work is that decision-making abilities underlie important aspects of wellness, health, security, and financial and social choices in our daily lives. PMID:27069380

Autonomy and couples' joint decision-making in healthcare.

Science.gov (United States)

Osamor, Pauline E; Grady, Christine

2018-01-11

Respect for autonomy is a key principle in bioethics. However, respecting autonomy in practice is complex because most people define themselves and make decisions influenced by a complex network of social relationships. The extent to which individual autonomy operates for each partner within the context of decision-making within marital or similar relationships is largely unexplored. This paper explores issues related to decision-making by couples (couples' joint decision-making) for health care and the circumstances under which such a practice should be respected as compatible with autonomous decision-making. We discuss the concept of autonomy as it applies to persons and to actions, human interdependency and gender roles in decision-making, the dynamics and outcomes of couples' joint decision-making, and the ethics of couples' joint decision-making. We believe that the extent to which couples' joint decision-making might be deemed ethically acceptable will vary depending on the context. Given that in many traditional marriages the woman is the less dominant partner, we consider a spectrum of scenarios of couples' joint decision-making about a woman's own health care that move from those that are acceptably autonomous to those that are not consistent with respecting the woman's autonomous decision-making. To the extent that there is evidence that both members of a couple understand a decision, intend it, and that neither completely controls the other, couples' joint decision-making should be viewed as consistent with the principle of respect for the woman's autonomy. At the other end of the spectrum are decisions made by the man without the woman's input, representing domination of one partner by the other. We recommend viewing the dynamics of couples' joint decision-making as existing on a continuum of degrees of autonomy. This continuum-based perspective implies that couples' joint decision-making should not be taken at face value but should be assessed against

Amateur Telescope Making

Science.gov (United States)

Tonkin, Stephen

Many amateur astronomers make their own instruments, either because of financial considerations or because they are just interested. Amateur Telescope Making offers a variety of designs for telescopes, mounts and drives which are suitable for the home-constructor. The designs range from simple to advanced, but all are within the range of a moderately well-equipped home workshop. The book not only tells the reader what he can construct, but also what it is sensible to construct given what time is available commercially. Thus each chapter begins with reasons for undertaking the project, then looks at theoretical consideration before finishing with practical instructions and advice. An indication is given as to the skills required for the various projects. Appendices list reputable sources of (mail order) materials and components. The telescopes and mounts range from "shoestring" (very cheap) instruments to specialist devices that are unavailable commercially.

Making Heat Visible

Science.gov (United States)

Goodhew, Julie; Pahl, Sabine; Auburn, Tim; Goodhew, Steve

2015-01-01

Householders play a role in energy conservation through the decisions they make about purchases and installations such as insulation, and through their habitual behavior. The present U.K. study investigated the effect of thermal imaging technology on energy conservation, by measuring the behavioral effect after householders viewed images of heat escaping from or cold air entering their homes. In Study 1 (n = 43), householders who received a thermal image reduced their energy use at a 1-year follow-up, whereas householders who received a carbon footprint audit and a non-intervention control demonstrated no change. In Study 2 (n = 87), householders were nearly 5 times more likely to install draught proofing measures after seeing a thermal image. The effect was especially pronounced for actions that addressed an issue visible in the images. Findings indicate that using thermal imaging to make heat loss visible can promote energy conservation. PMID:26635418

A brief history of decision making.

Science.gov (United States)

Buchanan, Leigh; O'Connell, Andrew

2006-01-01

Sometime around the middle of the past century, telephone executive Chester Barnard imported the term decision making from public administration into the business world. There it began to replace narrower terms, like "resource allocation" and "policy making," shifting the way managers thought about their role from continuous, Hamlet-like deliberation toward a crisp series of conclusions reached and actions taken. Yet, decision making is, of course, a broad and ancient human pursuit, flowing back to a time when people sought guidance from the stars. From those earliest days, we have strived to invent better tools for the purpose, from the Hindu-Arabic systems for numbering and algebra, to Aristotle's systematic empiricism, to friar Occam's advances in logic, to Francis Bacon's inductive reasoning, to Descartes's application of the scientific method. A growing sophistication with managing risk, along with a nuanced understanding of human behavior and advances in technology that support and mimic cognitive processes, has improved decision making in many situations. Even so, the history of decision-making strategies--captured in this time line and examined in the four accompanying essays on risk, group dynamics, technology, and instinct--has not marched steadily toward perfect rationalism. Twentieth-century theorists showed that the costs of acquiring information lead executives to make do with only good-enough decisions. Worse, people decide against their own economic interests even when they know better. And in the absence of emotion, it's impossible to make any decisions at all. Erroneous framing, bounded awareness, excessive optimism: The debunking of Descartes's rational man threatens to swamp our confidence in our choices. Is it really surprising, then, that even as technology dramatically increases our access to information, Malcolm Gladwell extols the virtues of gut decisions made, literally, in the blink of an eye?

Embodiment and sense-making in autism

Science.gov (United States)

De Jaegher, Hanne

2013-01-01

In this article, I sketch an enactive account of autism. For the enactive approach to cognition, embodiment, experience, and social interaction are fundamental to understanding mind and subjectivity. Enaction defines cognition as sense-making: the way cognitive agents meaningfully connect with their world, based on their needs and goals as self-organizing, self-maintaining, embodied agents. In the social realm, the interactive coordination of embodied sense-making activities with others lets us participate in each other's sense-making (social understanding = participatory sense-making). The enactive approach provides new concepts to overcome the problems of traditional functionalist accounts of autism, which can only give a piecemeal and disintegrated view because they consider cognition, communication, and perception separately, do not take embodied into account, and are methodologically individualistic. Applying the concepts of enaction to autism, I show: How embodiment and sense-making connect, i.e., how autistic particularities of moving, perceiving, and emoting relate to how people with autism make sense of their world. For instance, restricted interests or preference for detail will have certain sensorimotor correlates, as well as specific meaning for autistic people.That reduced flexibility in interactional coordination correlates with difficulties in participatory sense-making. At the same time, seemingly irrelevant “autistic behaviors” can be quite attuned to the interactive context. I illustrate this complexity in the case of echolalia. An enactive account of autism starts from the embodiment, experience, and social interactions of autistic people. Enaction brings together the sensorimotor, cognitive, social, experiential, and affective aspects of autism in a coherent framework based on a complex non-linear multi-causality. This foundation allows to build new bridges between autistic people and their often non-autistic context, and to improve quality

Embodiment and sense-making in autism.

Science.gov (United States)

De Jaegher, Hanne

2013-01-01

In this article, I sketch an enactive account of autism. For the enactive approach to cognition, embodiment, experience, and social interaction are fundamental to understanding mind and subjectivity. Enaction defines cognition as sense-making: the way cognitive agents meaningfully connect with their world, based on their needs and goals as self-organizing, self-maintaining, embodied agents. In the social realm, the interactive coordination of embodied sense-making activities with others lets us participate in each other's sense-making (social understanding = participatory sense-making). The enactive approach provides new concepts to overcome the problems of traditional functionalist accounts of autism, which can only give a piecemeal and disintegrated view because they consider cognition, communication, and perception separately, do not take embodied into account, and are methodologically individualistic. Applying the concepts of enaction to autism, I show: How embodiment and sense-making connect, i.e., how autistic particularities of moving, perceiving, and emoting relate to how people with autism make sense of their world. For instance, restricted interests or preference for detail will have certain sensorimotor correlates, as well as specific meaning for autistic people.That reduced flexibility in interactional coordination correlates with difficulties in participatory sense-making. At the same time, seemingly irrelevant "autistic behaviors" can be quite attuned to the interactive context. I illustrate this complexity in the case of echolalia. An enactive account of autism starts from the embodiment, experience, and social interactions of autistic people. Enaction brings together the sensorimotor, cognitive, social, experiential, and affective aspects of autism in a coherent framework based on a complex non-linear multi-causality. This foundation allows to build new bridges between autistic people and their often non-autistic context, and to improve quality of

Goal-Directed Decision Making with Spiking Neurons.

Science.gov (United States)

Friedrich, Johannes; Lengyel, Máté

2016-02-03

Behavioral and neuroscientific data on reward-based decision making point to a fundamental distinction between habitual and goal-directed action selection. The formation of habits, which requires simple updating of cached values, has been studied in great detail, and the reward prediction error theory of dopamine function has enjoyed prominent success in accounting for its neural bases. In contrast, the neural circuit mechanisms of goal-directed decision making, requiring extended iterative computations to estimate values online, are still unknown. Here we present a spiking neural network that provably solves the difficult online value estimation problem underlying goal-directed decision making in a near-optimal way and reproduces behavioral as well as neurophysiological experimental data on tasks ranging from simple binary choice to sequential decision making. Our model uses local plasticity rules to learn the synaptic weights of a simple neural network to achieve optimal performance and solves one-step decision-making tasks, commonly considered in neuroeconomics, as well as more challenging sequential decision-making tasks within 1 s. These decision times, and their parametric dependence on task parameters, as well as the final choice probabilities match behavioral data, whereas the evolution of neural activities in the network closely mimics neural responses recorded in frontal cortices during the execution of such tasks. Our theory provides a principled framework to understand the neural underpinning of goal-directed decision making and makes novel predictions for sequential decision-making tasks with multiple rewards. Goal-directed actions requiring prospective planning pervade decision making, but their circuit-level mechanisms remain elusive. We show how a model circuit of biologically realistic spiking neurons can solve this computationally challenging problem in a novel way. The synaptic weights of our network can be learned using local plasticity rules

Emotion, decision-making and the brain.

Science.gov (United States)

Chang, Luke J; Sanfey, Alan G

2008-01-01

Initial explorations in the burgeoning field of neuroeconomics have highlighted evidence supporting a potential dissociation between a fast automatic system and a slow deliberative controlled system. Growing research in the role of emotion in decision-making has attempted to draw parallels to the automatic system. This chapter will discuss a theoretical framework for understanding the role of emotion in decision-making and evidence supporting the underlying neural substrates. This chapter applies a conceptual framework to understanding the role of emotion in decision-making, and emphasizes a distinction between expected and immediate emotions. Expected emotions refer to anticipated emotional states associated with a given decision that are never actually experienced. Immediate emotions, however, are experienced at the time of decision, and either can occur in response to a particular decision or merely as a result of a transitory fluctuation. This chapter will review research from the neuroeconomics literature that supports a neural dissociation between these two classes of emotion and also discuss a few interpretive caveats. Several lines of research including regret, uncertainty, social decision-making, and moral decision-making have yielded evidence consistent with our formulization--expected and immediate emotions may invoke dissociable neural systems. This chapter provides a more specific conceptualization of the mediating role of emotions in the decision-making process, which has important implications for understanding the interacting neural systems underlying the interface between emotion and cognition--a topic of immediate value to anyone investigating topics within the context of social-cognitive-affective-neuroscience.

Decision-making in diabetes mellitus type 1.

Science.gov (United States)

Rustad, James K; Musselman, Dominique L; Skyler, Jay S; Matheson, Della; Delamater, Alan; Kenyon, Norma S; Cáceda, Ricardo; Nemeroff, Charles B

2013-01-01

Decreased treatment adherence in patients with diabetes mellitus type 1 (type 1 DM) may reflect impairments in decision-making and underlying associated deficits in working memory and executive functioning. Other factors, including comorbid major depression, may also interfere with decision-making. The authors sought to review the clinically relevant characteristics of decision-making in type 1 DM by surveying the literature on decision-making by patients with type 1 DM. Deficiencies in decision-making in patients with type 1 DM or their caregivers contribute to treatment nonadherence and poorer metabolic control. Animal models of type 1 DM reveal deficits in hippocampal-dependent memory tasks, which are reversible with insulin. Neurocognitive studies of patients with type 1 DM reveal lowered performance on ability to apply knowledge to solve problems in a new situation and acquired scholarly knowledge, psychomotor efficiency, cognitive flexibility, visual perception, speed of information-processing, and sustained attention. Other factors that might contribute to poor decision-making in patients with type 1 DM, include "hypoglycemia unawareness" and comorbid major depression (given its increased prevalence in type 1 DM). Future studies utilizing novel treatment strategies to help patients with type 1 DM make better decisions about their disease may improve their glycemic control and quality of life, while minimizing the impact of end-organ disease.

Assessment Can Support Reasoning and Sense Making

Science.gov (United States)

Suurtam, Christine

2012-01-01

"Reasoning and sense making should occur in every classroom every day," states "Focus in High School Mathematics: Reasoning and Sense Making" (NCTM 2009, p. 5). As this book suggests, reasoning can take many forms, including explorations and conjectures as well as explanations and justifications of student thinking. Sense making, on the other…

Logical Reasoning and Decision Making

OpenAIRE

Ong, D; Khaddaj, Souheil; Bashroush, Rabih

2011-01-01

Most intelligent systems have some form of \\ud decision making mechanisms built into their \\ud organisations. These normally include a logical \\ud reasoning element into their design. This paper reviews \\ud and compares the different logical reasoning strategies, \\ud and tries to address the accuracy and precision of \\ud decision making by formulating a tolerance to \\ud imprecision view which can be used in conjunction with \\ud the various reasoning strategies.

In the making

DEFF Research Database (Denmark)

2005-01-01

disciplines and includes other research areas with common interest in how people shape and make sense of things in an increasingly man-made world. The conference directs its interest towards the diversity, challenges, emerging practices and understanding of design. Rather than searching for common definitions...

Making Market Decisions in the Classroom.

Science.gov (United States)

Rose, Stephen A.

1986-01-01

Computer software that will help intermediate and secondary social studies students learn to make rational decisions about personal and societal concerns are described. The courseware places students in the roles of business managers who make decisions about operating their firms. (RM)

Evaluating Utility in Diagnostic Decision Making.

Science.gov (United States)

Harber, Jean R.

1981-01-01

The utility of the procedures special educators apply in making decisions about the identification of handicapped individuals has not been thoroughly studied. The paper examines the utility of diagnostic decision making from the perspective of receiver operating curve analysis. (Author)

Emotion and decision making.

Science.gov (United States)

Lerner, Jennifer S; Li, Ye; Valdesolo, Piercarlo; Kassam, Karim S

2015-01-03

A revolution in the science of emotion has emerged in recent decades, with the potential to create a paradigm shift in decision theories. The research reveals that emotions constitute potent, pervasive, predictable, sometimes harmful and sometimes beneficial drivers of decision making. Across different domains, important regularities appear in the mechanisms through which emotions influence judgments and choices. We organize and analyze what has been learned from the past 35 years of work on emotion and decision making. In so doing, we propose the emotion-imbued choice model, which accounts for inputs from traditional rational choice theory and from newer emotion research, synthesizing scientific models.

Uncertain multi-attribute decision making methods and applications

CERN Document Server

Xu, Zeshui

2015-01-01

This book introduces methods for uncertain multi-attribute decision making including uncertain multi-attribute group decision making and their applications to supply chain management, investment decision making, personnel assessment, redesigning products, maintenance services, military system efficiency evaluation. Multi-attribute decision making, also known as multi-objective decision making with finite alternatives, is an important component of modern decision science. The theory and methods of multi-attribute decision making have been extensively applied in engineering, economics, management and military contexts, such as venture capital project evaluation, facility location, bidding, development ranking of industrial sectors and so on. Over the last few decades, great attention has been paid to research on multi-attribute decision making in uncertain settings, due to the increasing complexity and uncertainty of supposedly objective aspects and the fuzziness of human thought. This book can be used as a ref...