Technical democracy as a challenge to urban studies

DEFF Research Database (Denmark)

Farías, Ignacio; Blok, Anders

2016-01-01

What is technical democracy? And why does it matter for urban studies? As an introduction to this special feature, we address these questions by reflecting on To Our Friends, the 2014 manifesto of the Invisible Committee. We engage in particular its provocative diagnosis of the current situation......: power no longer resides in the modern institutions of representative democracy and the market economy; instead, power has become a matter of logistics, infrastructures and expertise. This diagnosis, we suggest, brings into view the challenge of technical democracy, that is, the democratization of techno......-scientific expertise and the instauration of forms of lasting collaboration among experts and laypeople. Urban politics, we claim, increasingly turns around socio-technical controversies and it is in terms of the politics of expertise that we should analyse and engage it. Building on Science and Technology Studies...

The Challenges of Career and Technical Education Concurrent Enrollment: An Administrative Perspective

Science.gov (United States)

Haag, Patricia W.

2015-01-01

Career and technical education concurrent enrollment may pose unique challenges in programming and enrollment for program administrators, and this chapter describes the experiences and challenges of a CTE concurrent enrollment administrator.

The NIOSH Radiation Dose Reconstruction Project: managing technical challenges.

Science.gov (United States)

Moeller, Matthew P; Townsend, Ronald D; Dooley, David A

2008-07-01

Approximately two years after promulgation of the Energy Employees Occupational Illness Compensation Program Act, the National Institute for Occupational Safety and Health Office of Compensation and Analysis Support selected a contractor team to perform many aspects of the radiation dose reconstruction process. The project scope and schedule necessitated the development of an organization involving a comparatively large number of health physicists. From the initial stages, there were many technical and managerial challenges that required continuous planning, integration, and conflict resolution. This paper identifies those challenges and describes the resolutions and lessons learned. These insights are hopefully useful to managers of similar scientific projects, especially those requiring significant data, technical methods, and calculations. The most complex challenge has been to complete defensible, individualized dose reconstructions that support timely compensation decisions at an acceptable production level. Adherence to applying claimant-favorable and transparent science consistent with the requirements of the Act has been the key to establishing credibility, which is essential to this large and complex project involving tens of thousands of individual stakeholders. The initial challenges included garnering sufficient and capable scientific staff, developing an effective infrastructure, establishing necessary methods and procedures, and integrating activities to ensure consistent, quality products. The continuing challenges include maintaining the project focus on recommending a compensation determination (rather than generating an accurate dose reconstruction), managing the associated very large data and information management challenges, and ensuring quality control and assurance in the presence of an evolving infrastructure. The lessons learned concern project credibility, claimant favorability, project priorities, quality and consistency, and critical

Safety and man in light of the analysis of major technical accidents

International Nuclear Information System (INIS)

Carnino, A.

1990-01-01

Up to the seventies, it was not easy to admit human failure as a cause of industrial accidents. Man was considered as reliable. With the perfection of materials, technical systems and industrial processes though, man has become the weakest link in the chain of technical events. He is and stays a remarkably reliable being, with a roughly estimated average failure quota of 1:1000 manipulations. If the hypothetical risk should be kept very low, this value can become a problem. Instead of judging a mistake as a punishable crime, as the present tendency will have it, a more differentiated, systematical approach is called for. By means of an analysis of four major accidents - Chernobyl, Three Mile Island, Challenger and Bhopal - interesting parallels between the causes of such accidents can be found. Human failure, e.g. of a surgeon, is in most cases, the direct cause of an accident. A whole series of further causes, which can be assigned to different areas of influence but are usually interdependent, also play a role. While the human factor must be viewed as more or less predetermined, far reaching improvements can be made to reduce the risk of accident. Today, thanks to modern technology and new findings, it is possible to practically neutralize human error. This creates more costs and necessitates giving up short term production maximization. It also requires the willingness to give safety absolute priority. The name 'culture de surete' (safety culture) is used to describe this concept. Surprising similarities between the causes of the four mentioned major accidents were discovered. Certain circumstances, such as the time of day, played a role. The concept of a plant, resp. technical process has an essential influence, as well as company policy (importance of safety, preparation of emergency procedures, training, maintenance, company rules) and management (evaluation and realization of foreign and the company's own operation experiences and error alarms). (author) 7

Technical challenges for big data in biomedicine and health: data sources, infrastructure, and analytics.

Science.gov (United States)

Peek, N; Holmes, J H; Sun, J

2014-08-15

To review technical and methodological challenges for big data research in biomedicine and health. We discuss sources of big datasets, survey infrastructures for big data storage and big data processing, and describe the main challenges that arise when analyzing big data. The life and biomedical sciences are massively contributing to the big data revolution through secondary use of data that were collected during routine care and through new data sources such as social media. Efficient processing of big datasets is typically achieved by distributing computation over a cluster of computers. Data analysts should be aware of pitfalls related to big data such as bias in routine care data and the risk of false-positive findings in high-dimensional datasets. The major challenge for the near future is to transform analytical methods that are used in the biomedical and health domain, to fit the distributed storage and processing model that is required to handle big data, while ensuring confidentiality of the data being analyzed.

HNSciCloud - Overview and technical Challenges

Science.gov (United States)

Gasthuber, Martin; Meinhard, Helge; Jones, Robert

2017-10-01

HEP is only one of many sciences with sharply increasing compute requirements that cannot be met by profiting from Moore’s law alone. Commercial clouds potentially allow for realising larger economies of scale. While some small-scale experience requiring dedicated effort has been collected, public cloud resources have not been integrated yet with the standard workflows of science organisations in their private data centres; in addition, European science has not ramped up to significant scale yet. The HELIX NEBULA Science Cloud project - HNSciCloud, partly funded by the European Commission, addresses these points. Ten organisations under CERN’s leadership, covering particle physics, bioinformatics, photon science and other sciences, have joined to procure public cloud resources as well as dedicated development efforts towards this integration. The HNSciCloud project faces the challenge to accelerate developments performed by the selected commercial providers. In order to guarantee cost efficient usage of IaaS resources across a wide range of scientific communities, the technical requirements had to be carefully constructed. With respect to current IaaS offerings, dataintensive science is the biggest challenge; other points that need to be addressed concern identity federations, network connectivity and how to match business practices of large IaaS providers with those of public research organisations. In the first section, this paper will give an overview of the project and explain the findings so far. The last section will explain the key points of the technical requirements and present first results of the experience of the procurers with the services in comparison to their’on-premise’ infrastructure.

Science Drivers and Technical Challenges for Advanced Magnetic Resonance

Energy Technology Data Exchange (ETDEWEB)

Mueller, Karl T.; Pruski, Marek; Washton, Nancy M.; Lipton, Andrew S.

2013-03-07

This report recaps the "Science Drivers and Technical Challenges for Advanced Magnetic Resonance" workshop, held in late 2011. This exploratory workshop's goal was to discuss and address challenges for the next generation of magnetic resonance experimentation. During the workshop, participants from throughout the world outlined the science drivers and instrumentation demands for high-field dynamic nuclear polarization (DNP) and associated magnetic resonance techniques, discussed barriers to their advancement, and deliberated the path forward for significant and impactful advances in the field.

A study on the regulatory approach of major technical issues

Energy Technology Data Exchange (ETDEWEB)

Chang, Keun Sun; Choi, J. T.; Kim, I. J. [Sunmoon Univ., Asan (Korea, Republic of); Lee, S. H.; Baek, W. P.; Yang, S. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

1998-06-15

This project is to provide the regulatory direction of 4 major technical issues for the Korean Next Generation Reactors, which are parts of major technical issues resulted from the safety regulation R and D on the KNGR. The outstanding results are as follows : reliability of risk significant SSCs established during design stage must be maintained through the operating life of the plant, currently used classification method of plant conditions and safety requirement were reviewed, and a quantitative classification method is needed to be developed further, the basic regulatory directions are proposed for multiple failures such as SBO, TLOFW, multiple SGTR and ATWS, safety requirements are proposed for survivability/availability of severe accident mitigation design features by 5 items if basic requirements, selection of initial event, identification of available equipment and instruments, identification of environmental conditions and verification methods.

Major Management Challenges and Program Risks: Small Business Administration

Science.gov (United States)

2001-01-01

2001 Major Management Challenges and Program Risks Small Business AdministrationGAO-01-260 Form SF298 Citation Data Report Date ("DD MON YYYY...34) 00JAN2001 Report Type N/A Dates Covered (from... to) ("DD MON YYYY") Title and Subtitle Major Management Challenges and Program Risks Small Business ...Administration (SBA) as it seeks to aid, counsel, assist, and protect the interests of the nations small businesses and help businesses and families

Affordances and Alignments: Continuing Challenges in Advising Undergraduate Psychology Majors

Science.gov (United States)

Landrum, R. Eric

2018-01-01

Challenges abound in providing accurate and useful information to prospective and declared psychology majors about their career options and how to make decisions that will lead to satisfying and rewarding postgraduate lives. One component of this challenge is that by majoring in psychology, career affordances (i.e., the opportunities and…

FINAL TECHNICAL REPORT: 20% Wind by 2030: Overcoming the Challenges

Energy Technology Data Exchange (ETDEWEB)

Tom Kaiserski; Dan Lloyd

2012-02-28

The funds allocated through the Wind Powering America (WPA) grant were utilized by the State of Montana to support broad outreach activities communicating the benefits and opportunities of increased wind energy and transmission development. The challenges to increased wind development were also clearly communicated with the understanding that a clearer comprehension of the challenges would be beneficial in overcoming the obstacles to further development. The ultimate purpose of these activities was to foster the increased development of Montana's rich wind resources through increased public acceptance and wider dissemination of technical resources.

Uganda's National Transmission Backbone Infrastructure Project: Technical Challenges and the Way Forward

Science.gov (United States)

Bulega, T.; Kyeyune, A.; Onek, P.; Sseguya, R.; Mbabazi, D.; Katwiremu, E.

2011-10-01

Several publications have identified technical challenges facing Uganda's National Transmission Backbone Infrastructure project. This research addresses the technical limitations of the National Transmission Backbone Infrastructure project, evaluates the goals of the project, and compares the results against the technical capability of the backbone. The findings of the study indicate a bandwidth deficit, which will be addressed by using dense wave division multiplexing repeaters, leasing bandwidth from private companies. Microwave links for redundancy, a Network Operation Center for operation and maintenance, and deployment of wireless interoperability for microwave access as a last-mile solution are also suggested.

International Socio-Technical Challenges for Geological Disposal (InSOTEC): Project Aims and Preliminary Results - 12236

Energy Technology Data Exchange (ETDEWEB)

Bergmans, Anne; Schroeder, Jantine [University of Antwerp, Faculty of Political and Social Sciences, 2000 Antwerp (Belgium); Simmons, Peter [University of East Anglia, School of Environmental Sciences, NR4 7TJ Norwich (United Kingdom); Barthe, Yannick; Meyer, Morgan [CNRS, Ecole des Mines, 75272 Paris (France); Sundqvist, Goeran [Universitetet i Oslo, Centre for Studies of Technology, Innovation and Culture, 0851 Oslo (Norway); Martell, Merixell [MERIENCE Strategic Thinking, 08734 Olerdola (Spain); Kallenbach-Herbert, Beate [Oeko Institut, 64295 Darmstadt (Germany)

2012-07-01

InSOTEC is a social sciences research project which aims to generate a better understanding of the complex interplay between the technical and the social in radioactive waste management and, in particular, in the design and implementation of geological disposal. It currently investigates and analyses the most striking socio-technical challenges to implementing geological disposal of radioactive waste in 14 national programs. A focus is put on situations and issues where the relationship between the technical and social components is still unstable, ambiguous and controversial, and where negotiations are taking place in terms of problem definitions and preferred solutions. Such negotiations can vary from relatively minor contestation, over mild commotion, to strong and open conflicts. Concrete examples of socio-technical challenges are: the question of siting, introducing the notion of reversibility / retrievability into the concept of geological disposal, or monitoring for confidence building. In a second stage the InSOTEC partners aim to develop a fine-grained understanding of how the technical and the social influence, shape, build upon each other in the case of radioactive waste management and the design and implementation of geological disposal. How are socio-technical combinations in this field translated and materialized into the solutions finally adopted? With what kinds of tools and instruments are they being integrated? Complementary to providing better theoretical insight into these socio-technical challenges/combinations, InSOTEC aims to provide concrete suggestions on how to address these within national and international contexts. To this end, InSOTEC will deliver insights into how mechanisms for interaction between the technical community and a broad range of socio-political actors could be developed. (authors)

Technical Challenges in Developing Software to Collect Twitter Data

Directory of Open Access Journals (Sweden)

Daniel Chudnov

2014-10-01

Full Text Available Over the past two years, George Washington University Libraries developed Social Feed Manager (SFM, a Python and Django-based application for collecting social media data from Twitter. Expanding the project from a research prototype to a more widely useful application has presented a number of technical challenges, including changes in the Twitter API, supervision of simultaneous streaming processes, management, storage, and organization of collected data, meeting researcher needs for groups or sets of data, and improving documentation to facilitate other institutions’ installation and use of SFM. This article will describe how the Social Feed Manager project addressed these issues, use of supervisord to manage processes, and other technical decisions made in the course of this project through late summer 2014. This article is targeted towards librarians and archivists who are interested in building collections around web archives and social media data, and have a particular interest in the technical work involved in applying software to the problem of building a sustainable collection management program around these sources.

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

Science.gov (United States)

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Technical Challenges of Enterprise Imaging: HIMSS-SIIM Collaborative White Paper

OpenAIRE

Clunie, David A.; Dennison, Don K.; Cram, Dawn; Persons, Kenneth R.; Bronkalla, Mark D.; Primo, Henri ?Rik?

2016-01-01

This white paper explores the technical challenges and solutions for acquiring (capturing) and managing enterprise images, particularly those involving visible light applications. The types of acquisition devices used for various general-purpose photography and specialized applications including dermatology, endoscopy, and anatomic pathology are reviewed. The formats and standards used, and the associated metadata requirements and communication protocols for transfer and workflow are consider...

Technical challenges of superconductivity and cryogenics in pursuing TESLA-TTF

International Nuclear Information System (INIS)

Shu, Quan-Sheng

1996-01-01

TESLA (TeV Energy Superconducting Linear Accelerator) Collaboration is an international R ampersand D effort towards the development of an e + e - linear collider with 500 GeV center of mass by means of 20 km active superconducting accelerating structures at a frequency of 1.3 GHz. The ultimate challenges faced by the TESLA project are (1) to raise operational accelerating gradients to 25 MV/m from current world level of 5-10 MV/m, and (2) to reduce construction costs (cryomodules, klystrons, etc.) down to $2,000/MV from now about $40,000/MV. The TESLA Collaboration is building a prototype TESLA test facility (TTF) of a 500 MeV superconducting linear accelerator to establish the technical basis. TTF is presently under construction and will be commissioned at DESY in 1997, through the joint efforts of 24 laboratories from 8 countries. Significant progress has been made in reaching the high accelerating gradient of 25 MV/m in superconducting cavities, developing cryomodules and constructing TTF infrastructure, etc. This paper will briefly discuss the challenges being faced and review the progress achieved in the technical area of superconductivity and cryogenics by the TESLA Collaboration

A study on the regulatory approach of major technical issues

Energy Technology Data Exchange (ETDEWEB)

Chang, Keun Sun; Oh, S. H.; Kang, H. J.; Kim, G. S. [Sunmoon Univ., Asan (Korea, Republic of); Lee, S. H.; Baek, W. P.; Yang, S. H.; Jeong, Y. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

1999-02-15

This project is to provide the regulatory direction of 4 major technical issues for the Korean Next Generation Reactors, which are parts of major technical issues resulted from the safety regulation R and D on the KNGR. The outstanding results are are as follows : related to the classification and acceptance criteria of plant conditions, currently used classification and safety requirement were reviewed and regulatory direction was proposed. Among multiple failures, it is identified that SBO, TLOFW, multiple SGTR and ATWS are basically to be considered for additional requirements for advanced reactors. This study reviewed risk aspects, design consideration, and trends of safety requirements, and proposed fundamental safety requirements to be applied for KNGR. Multiple steam generator tube failure is a significant safety concern because of the possibility of release of radionuclides to the environment through containment bypass. Proposed safety requirement for this event can be categorized mainly as analysis requirement, design evaluation requirement and PSA requirement; For protection of containment failure, a reasonable safety position is necessary through and integrated review of possibility of severe accident occurrence, effects of sever accident mitigation features and cost effects of these design features. With this consideration safety requirements developed are the analysis requirement, provision of protective measures and survivability/availability of protective measures.

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

Science.gov (United States)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

Major Management Challenges and Program Risks. Department of Labor

National Research Council Canada - National Science Library

2001-01-01

This report addresses the major performance and accountability challenges facing the Department of Labor as it seeks to promote the welfare and economic security of the nations work force and ensure...

Technical solutions to nonproliferation challenges

Science.gov (United States)

Satkowiak, Lawrence

2014-05-01

The threat of nuclear terrorism is real and poses a significant challenge to both U.S. and global security. For terrorists, the challenge is not so much the actual design of an improvised nuclear device (IND) but more the acquisition of the special nuclear material (SNM), either highly enriched uranium (HEU) or plutonium, to make the fission weapon. This paper provides two examples of technical solutions that were developed in support of the nonproliferation objective of reducing the opportunity for acquisition of HEU. The first example reviews technologies used to monitor centrifuge enrichment plants to determine if there is any diversion of uranium materials or misuse of facilities to produce undeclared product. The discussion begins with a brief overview of the basics of uranium processing and enrichment. The role of the International Atomic Energy Agency (IAEA), its safeguard objectives and how the technology evolved to meet those objectives will be described. The second example focuses on technologies developed and deployed to monitor the blend down of 500 metric tons of HEU from Russia's dismantled nuclear weapons to reactor fuel or low enriched uranium (LEU) under the U.S.-Russia HEU Purchase Agreement. This reactor fuel was then purchased by U.S. fuel fabricators and provided about half the fuel for the domestic power reactors. The Department of Energy established the HEU Transparency Program to provide confidence that weapons usable HEU was being blended down and thus removed from any potential theft scenario. Two measurement technologies, an enrichment meter and a flow monitor, were combined into an automated blend down monitoring system (BDMS) and were deployed to four sites in Russia to provide 24/7 monitoring of the blend down. Data was downloaded and analyzed periodically by inspectors to provide the assurances required.

Technical solutions to nonproliferation challenges

Energy Technology Data Exchange (ETDEWEB)

Satkowiak, Lawrence [Director, Nonproliferation, Safeguards and Security Programs, Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States)

2014-05-09

The threat of nuclear terrorism is real and poses a significant challenge to both U.S. and global security. For terrorists, the challenge is not so much the actual design of an improvised nuclear device (IND) but more the acquisition of the special nuclear material (SNM), either highly enriched uranium (HEU) or plutonium, to make the fission weapon. This paper provides two examples of technical solutions that were developed in support of the nonproliferation objective of reducing the opportunity for acquisition of HEU. The first example reviews technologies used to monitor centrifuge enrichment plants to determine if there is any diversion of uranium materials or misuse of facilities to produce undeclared product. The discussion begins with a brief overview of the basics of uranium processing and enrichment. The role of the International Atomic Energy Agency (IAEA), its safeguard objectives and how the technology evolved to meet those objectives will be described. The second example focuses on technologies developed and deployed to monitor the blend down of 500 metric tons of HEU from Russia's dismantled nuclear weapons to reactor fuel or low enriched uranium (LEU) under the U.S.-Russia HEU Purchase Agreement. This reactor fuel was then purchased by U.S. fuel fabricators and provided about half the fuel for the domestic power reactors. The Department of Energy established the HEU Transparency Program to provide confidence that weapons usable HEU was being blended down and thus removed from any potential theft scenario. Two measurement technologies, an enrichment meter and a flow monitor, were combined into an automated blend down monitoring system (BDMS) and were deployed to four sites in Russia to provide 24/7 monitoring of the blend down. Data was downloaded and analyzed periodically by inspectors to provide the assurances required.

Needs, requirements and challenges for technical support to nuclear safety authority

International Nuclear Information System (INIS)

Madonna, A.; Orsini, G.

2010-01-01

To face the very broad range of technical matters on which the regulatory and licensing activity are based, and related research and development activity, the Nuclear Safety Authorities (NSA) may need to rely upon external technical and scientific support. In providing technical support to NSA, the experience shows, from one side, the importance to have technical support organizations (TSO) with recognized competence, independence and appropriate regulatory view, and from the other side, the importance to have within the NSAs well developed management and technical capability to address, coordinate and use the results of the external technical support. Retaining the NSA the full responsibility for the final decision. Under which conditions and modus operandi the external support shall be provided in order to comply with requirements of being independent, competent and timely provided, fulfilling the administrative procedures, is the subject of attention and consideration of TSO function today. The Italian regulatory body is currently going to be institutionally re-established according to new law approved in 2009 /1/ and it needs to be resourced and fully organized with necessary capacities in the nearest future. The perspective of a new nuclear program, recently launched by the government, with significant incoming tasks for regulation and licensing, against the existing limited resources, let foresee a substantial potential need for technical support and advice. ITER-Consult (Ltd), created in 2003 in Italy, has well developed capabilities to provide independent technical evaluation and support to NSAs, to maintain safety culture and updated knowledge, to transfer know how and to establish international cooperation and networking. This mission is guided assuming as values the independence, the professional competence, the transparency, the credibility and the establishment of respectful relationship with the partners. Challenges exist for funding and operational

Translating English Technical Texts The Role of the Translator and the Challenges of Technological Facilities

Directory of Open Access Journals (Sweden)

Dana Rus

2009-12-01

Full Text Available The paper approaches the specific case of the technical discourse in the context of a modern world which facilitates and promotes a more and more refined diversification of specialized texts. Created, imposed, promoted and sustained by economic reasons, the translation of technical texts finds new challenges as it is confronted with the opportunities offered by the cyberspace. While being quick, available and free, online instant translation services prove to be essentially inappropriate for the translation of technical texts, where accuracy is a prerogative.

Estimate of Technical Potential for Minimum Efficiency Performance Standards in 13 Major World Economies

Energy Technology Data Exchange (ETDEWEB)

Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ke, Jing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-07-01

As part of the ongoing effort to estimate the foreseeable impacts of aggressive minimum efficiency performance standards (MEPS) programs in the world’s major economies, Lawrence Berkeley National Laboratory (LBNL) has developed a scenario to analyze the technical potential of MEPS in 13 major economies around the world1 . The “best available technology” (BAT) scenario seeks to determine the maximum potential savings that would result from diffusion of the most efficient available technologies in these major economies.

Transsphenoidal surgery in patients with acromegaly: operative strategies for overcoming technically challenging anatomical variations.

Science.gov (United States)

Zada, Gabriel; Cavallo, Luigi M; Esposito, Felice; Fernandez-Jimenez, Julio Cesar; Tasiou, Anastasia; De Angelis, Michelangelo; Cafiero, Tullio; Cappabianca, Paolo; Laws, Edward R

2010-10-01

In addition to difficulties with anesthetic and medical management, transsphenoidal operations in patients with longstanding acromegaly are associated with inherent intraoperative challenges because of anatomical variations that occur frequently in these patients. The object of this study was to review the overall safety profile and anatomical/technical challenges associated with transsphenoidal surgery in patients with acromegaly. The authors performed a retrospective analysis of 169 patients who underwent endoscopic transsphenoidal operations for growth hormone-secreting adenomas to assess the incidence of surgical complications. A review of frequently occurring anatomical challenges and operative strategies employed during each phase of the operation to address these particular issues was performed. Of 169 cases reviewed, there was no perioperative mortality. Internal carotid artery injury occurred in 1 patient (0.6%) with complex sinus anatomy, who remained neurologically intact following endovascular unilateral carotid artery occlusion. Other complications included: significant postoperative epistaxis (5 patients [3%]), transient diabetes insipidus (5 patients [3%]), delayed symptomatic hyponatremia (4 patients [2%]), CSF leak (2 patients [1%]), and pancreatitis (1 patient [0.6%]). Preoperative considerations in patients with acromegaly should include a cardiopulmonary evaluation and planning regarding intubation and other aspects of the anesthetic technique. During the nasal phase of the transsphenoidal operation, primary challenges include maintaining adequate visualization and hemostasis, which is frequently compromised by redundant, edematous nasal mucosa and bony hypertrophy of the septum and the nasal turbinates. During the sphenoid phase, adequate bony removal, optimization of working space, and correlation of imaging studies to intraoperative anatomy are major priorities. The sellar phase is frequently challenged by increased sellar floor thickness

Reaching a 1.5°C target: socio-technical challenges for a rapid transition to low-carbon electricity systems.

Science.gov (United States)

Eyre, Nick; Darby, Sarah J; Grünewald, Philipp; McKenna, Eoghan; Ford, Rebecca

2018-05-13

A 1.5°C global average target implies that we should no longer focus on merely incremental emissions reductions from the electricity system, but rather on fundamentally re-envisaging a system that, sooner rather than later, becomes carbon free. Many low-carbon technologies are surpassing mainstream predictions for both uptake and cost reduction. Their deployment is beginning to be disruptive within established systems. 'Smart technologies' are being developed to address emerging challenges of system integration, but their rates of future deployment remain uncertain. We argue that transition towards a system that can fully displace carbon generation sources will require expanding the focus of our efforts beyond technical solutions. Recognizing that change has social and technical dimensions, and that these interact strongly, we set out a socio-technical review that covers electricity infrastructure, citizens, business models and governance. It describes some of the socio-technical challenges that need to be addressed for the successful transition of the existing electricity systems. We conclude that a socio-technical understanding of electricity system transitions offers new and better insights into the potential and challenges for rapid decarbonization.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. © 2018 The Author(s).

Multidisciplinary design optimization of large wind turbines—Technical, economic, and design challenges

International Nuclear Information System (INIS)

Ashuri, Turaj; Zaaijer, Michiel B.; Martins, Joaquim R.R.A.; Zhang, Jie

2016-01-01

Highlights: • 5, 10 and 20 MW wind turbines are developed using multidisciplinary design optimization. • Technical feasibility and economy of large wind turbines are investigated. • Critical upscaling trends of existing wind turbines are presented up to 20 MW. • Design challenges of large wind turbines are identified, and design solutions proposed. • With no design innovation, upscaling of existing turbines will increase the costs. - Abstract: Wind energy has experienced a continuous cost reduction in the last decades. A popular cost reduction technique is to increase the rated power of the wind turbine by making it larger. However, it is not clear whether further upscaling of the existing wind turbines beyond the 5–7 MW range is technically feasible and economically attractive. To address this question, this study uses 5, 10, and 20 MW wind turbines that are developed using multidisciplinary design optimization as upscaling data points. These wind turbines are upwind, 3-bladed, pitch-regulated, variable-speed machines with a tubular tower. Based on the design data and properties of these wind turbines, scaling trends such as loading, mass, and cost are developed. These trends are used to study the technical and economical aspects of upscaling and its impact on the design and cost. The results of this research show the technical feasibility of the existing wind turbines up to 20 MW, but the design of such an upscaled machine is cost prohibitive. Mass increase of the rotor is identified as a main design challenge to overcome. The results of this research support the development of alternative lightweight materials and design concepts such as a two-bladed downwind design for upscaling to remain a cost effective solution for future wind turbines.

RUSSIAN-VIETNAMESE MILITARY-TECHNICAL COOPERATION: CHALLENGES AND OPPORTUNITIES FOR RUSSIA

Directory of Open Access Journals (Sweden)

Н В Федоров

2017-12-01

Full Text Available Vietnam plays important role in Russian policy in the Asia-Pacific region. Military-technical cooperation holds special position in Russian-Vietnamese relations. The aim of the article is the detection of the special features of military-technical cooperation between Russia and Vietnam, and also challenges and opportunities it provides for Russian policy. After the collapse of the USSR defense interaction between Russia and Vietnam was determined by commercial foundations. Vietnam needed new Russian weapons to protect its interests, first of all, in the South China Sea. For Moscow military-technical cooperation with Vietnam got economic significance. But later there was a rise of political dimension of cooperation in this sphere, influenced by some external factors. The period of the 2000-2010s was marked by growth of arms sales from Russia to Vietnam. It was mostly caused by the escalation of the South China Sea conflict, for which US-Chinese contradictions began to play an increasing role. Military-technical coopera-tion with Vietnam influenced some aspects of policy of Russia in the region. There was an increase of indi-rect involvement of Russia into the South China Sea conflict. Russian arms sales for Vietnam became one of problems in Russian-Chinese relations. But Russia and China could cope with these disputes, partly because of enlargement of their interaction in international relations, including the demonstration of similar position for some aspects of the South China Sea conflict. In the framework of development of defense cooperation with Vietnam, Russia could get special conditions of access to facilities of Cam Ranh Bay that strengthened its strategic positions in the region. Russian cooperation with Hanoi in military-technical field and general reinforcement of Russian positions in Vietnam might be also a reason for contradictions with the US.

CSCW Challenges in Large-Scale Technical Projects - a case study

DEFF Research Database (Denmark)

Grønbæk, Kaj; Kyng, Morten; Mogensen, Preben Holst

1992-01-01

This paper investigates CSCW aspects of large-scale technical projects based on a case study of a specific Danish engineering company and uncovers s challenges to CSCW applications in this setting. The company is responsible for management and supervision of one of the worlds largest tunnel....... The initial qualitative analysis identified a number of bottlenecks in daily work, where support for cooperation is needed. Examples of bottlenecks are: sharing materials, issuing tasks, and keeping track of task status. Grounded in the analysis, cooperative design workshops based on scenarios of future work...

Airway management by the general practitioner in trauma patients. Technical and non-technical skills

Directory of Open Access Journals (Sweden)

Juan David Dominguez-Sánchez

2016-07-01

Full Text Available General practitioners must constantly face challenges imposed by their profession when performing interventions that are necessary for their patients. Many of these interventions not only require proper use of theoretical knowledge, but also putting into practice non-technical and psychomotor skills developed through professional training. Given the specific characteristics of each patient, the clinical setting in the which procedure takes place and the limited skills of the professional, the management of the airway of a patient with trauma injuries in the emergency room represents a major challenge for physicians.

Additive Manufacturing (AM) in Expeditionary Operations: Current Needs, Technical Challenges, and Opportunities

Science.gov (United States)

2016-06-01

REPORT TYPE AND DATES COVERED Master’s Thesis 06-30-2014 to 06-17-2016 4. TITLE AND SUBTITLE ADDITIVE MANUFACTURING (AM) IN EXPEDITIONARY OPERATIONS: CUR...CODE 13. ABSTRACT (maximum 200 words) Additive manufacturing (AM), or 3D printing, is poised to change the world of military expeditionary operations...unlimited ADDITIVE MANUFACTURING (AM) IN EXPEDITIONARY OPERATIONS: CURRENT NEEDS, TECHNICAL CHALLENGES, AND OPPORTUNITIES Matthew Daniel Friedell Captain

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

Science.gov (United States)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

76 FR 66078 - Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer...

Science.gov (United States)

2011-10-25

...-0087] Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer... discussions expected to help identify Outer Continental Shelf (OCS) challenges and technologies associated... structured venue for consultation among offshore deepwater oil and gas industry and regulatory experts in...

Maintaining Curriculum Consistency of Technical and Vocational Educational Programs through Teacher Design Teams

NARCIS (Netherlands)

Albashiry, Nabeel; Voogt, Joke; Pieters, Julius Marie

2016-01-01

Maintaining the quality and relevance of Technical Vocational Education and Training (TVET) curricula is a great challenge for TVET institutions in developing countries. One major challenge lies in the lack of curriculum design expertise of TVET academics. The purpose of this multiplecase study is

Preferences in Interactive Systems: Technical Challenges and Case Studies

OpenAIRE

Peintner, Bart; Viappiani, Paolo; Yorke-Smith, Neil

2008-01-01

Interactive artificial intelligence systems employ preferences in both their reasoning and their interaction with the user. This survey considers preference handling in applications such as recommender systems, personal assistant agents, and personalized user interfaces. We survey the major questions and approaches, present illustrative examples, and give an outlook on potential benefits and challenges.

Conservation biology in Asia: the major policy challenges.

Science.gov (United States)

McNeely, Jeffrey A; Kapoor-Vijay, Promila; Zhi, Lu; Olsvig-Whittaker, Linda; Sheikh, Kashif M; Smith, Andrew T

2009-08-01

With about half the world's human population and booming economies, Asia faces numerous challenges to its biodiversity. The Asia Section of the Society for Conservation Biology has identified some key policy issues in which significant progress can be made. These include developing new sources of funding for forest conservation; identifying potential impacts of energy alternatives on the conservation of biodiversity; curbing the trade in endangered species of plants and animals; a special focus on the conservation of mountain biodiversity; enhancing relevant research; ensuring that conservation biology contributes to major international conventions and funding mechanisms; using conservation biology to build a better understanding of zoonotic diseases; more effectively addressing human-animal conflicts; enhancing community-based conservation; and using conservation biology to help address the pervasive water-deficit problems in much of Asia. These challenges can be met through improved regional cooperation among the relevant stakeholders.

Comparison of Traditional and Innovative Techniques to Solve Technical Challenges

Science.gov (United States)

Perchonok, Michele

2011-01-01

This slide presentation reviews the use of traditional and innovative techniques to solve technical challenges in food storage technology. The planning for a mission to Mars is underway, and the food storage technology improvements requires that improvements be made. This new technology is required, because current food storage technology is inadequate,refrigerators or freezers are not available for food preservation, and that a shelf life of 5 years is expected. A 10 year effort to improve food packaging technology has not enhanced significantly food packaging capabilities. Two innovation techniques were attempted InnoCentive and Yet2.com and have provided good results, and are still under due diligence for solver verification.

Technical Challenges of Enterprise Imaging: HIMSS-SIIM Collaborative White Paper.

Science.gov (United States)

Clunie, David A; Dennison, Don K; Cram, Dawn; Persons, Kenneth R; Bronkalla, Mark D; Primo, Henri Rik

2016-10-01

This white paper explores the technical challenges and solutions for acquiring (capturing) and managing enterprise images, particularly those involving visible light applications. The types of acquisition devices used for various general-purpose photography and specialized applications including dermatology, endoscopy, and anatomic pathology are reviewed. The formats and standards used, and the associated metadata requirements and communication protocols for transfer and workflow are considered. Particular emphasis is placed on the importance of metadata capture in both order- and encounter-based workflow. The benefits of using DICOM to provide a standard means of recording and accessing both metadata and image and video data are considered, as is the role of IHE and FHIR.

Technical paper contest for women 1992. Space challenges: Earth and beyond

Science.gov (United States)

Orans, Robin (Editor)

1993-01-01

Two of the major concerns of the NASA Ames Research Center (NASA ARC) Advisory Committee for Women (ACW) are that recruitment of women scientists, engineers, and technicians needs to increase and that barriers to advancement need to be removed for improved representation of women in middle and upper management and scientific positions. One strategy that addressed this concern was the ACW sponsorship of a Technical Paper Contest for Women at Ames Research Center. Other sponsors of the Contest were the Ames Equal Opportunity Council and the Ames Contractor Council. The Technical Paper Contest for Women greatly increased the visibility of both the civil service women and the women who work for contractors at Ames. The women had the opportunity to hone their written and oral presentation skills. Networking among Ames women increased.

Positivists, Postmodernists, Aristotelians, and the Challenger Disaster.

Science.gov (United States)

Walzer, Arthur E.; Gross, Alan

1994-01-01

Examines the deliberations prior to the Challenger disaster from the perspective of three major approaches in recent scholarship in rhetoric as applied to technical communications: positivism, postmodernistic social constructionism, and classical Aristotelianism. Champions an approach based on Aristotle's "Rhetoric." (HB)

Home telemonitoring of vital signs--technical challenges and future directions.

Science.gov (United States)

Celler, Branko G; Sparks, Ross S

2015-01-01

The telemonitoring of vital signs from the home is an essential element of telehealth services for the management of patients with chronic conditions, such as congestive heart failure (CHF), chronic obstructive pulmonary disease (COPD), diabetes, or poorly controlled hypertension. Telehealth is now being deployed widely in both rural and urban settings, and in this paper, we discuss the contribution made by biomedical instrumentation, user interfaces, and automated risk stratification algorithms in developing a clinical diagnostic quality longitudinal health record at home. We identify technical challenges in the acquisition of high-quality biometric signals from unsupervised patients at home, identify new technical solutions and user interfaces, and propose new measurement modalities and signal processing techniques for increasing the quality and value of vital signs monitoring at home. We also discuss use of vital signs data for the automated risk stratification of patients, so that clinical resources can be targeted to those most at risk of unscheduled admission to hospital. New research is also proposed to integrate primary care, hospital, personal genomic, and telehealth electronic health records, and apply predictive analytics and data mining for enhancing clinical decision support.

Osteoid osteomas in common and in technically challenging locations treated with computed tomography-guided percutaneous radiofrequency ablation

International Nuclear Information System (INIS)

Mylona, Sophia; Patsoura, Sofia; Karapostolakis, Georgios; Galani, Panagiota; Pomoni, Anastasia; Thanos, Loukas

2010-01-01

To evaluate the efficacy of computed tomography (CT)-guided radiofrequency (RF) ablation for the treatment of osteoid osteomas in common and in technically challenging locations. Twenty-three patients with osteoid osteomas in common (nine cases) and technically challenging [14 cases: intra-articular (n = 7), spinal (n = 5), metaphyseal (n = 2)] positions were treated with CT-guided RF ablation. Therapy was performed under conscious sedation with a seven-array expandable RF electrode for 8-10 min at 80-110 C and power of 90-110 W. The patients went home under instruction. A brief pain inventory (BPI) score was calculated before and after (1 day, 4 weeks, 6 months and 1 year) treatment. All procedures were technically successful. Primary clinical success was 91.3% (21 of total 23 patients), despite the lesions' locations. BPI score was dramatically reduced after the procedure, and the decrease in BPI score was significant (P < 0.001, paired t-test; n - 1 = 22) for all periods during follow up. Two patients had persistent pain after 1 month and were treated successfully with a second procedure (secondary success rate 100%). No immediate or delayed complications were observed. CT-guided RF ablation is safe and highly effective for treatment of osteoid osteomas, even in technically difficult positions. (orig.)

Challenges in developing TSO to provide technical support in nuclear safety and security to Pakistan Nuclear Regulatory Authority

International Nuclear Information System (INIS)

Mallick, Shahid A.; Sherwani, Uzman Habib; Mehdi, M. Ammar

2010-01-01

This paper highlights the needs for the establishment of a technical support organization (TSO) in Pakistan Nuclear Regulatory Authority (PNRA), challenges faced during its development, application of training need assessment required for the competency development of its technical manpower and difficulties encountered after its evolution. Key issues addressed include recruitment of technical manpower and enhancing their competencies, acquisition of proper tools required for safety review and assessment, development of a sustainable education and training program consistent with the best international practices and taking the measures to get confidence of the regulatory body. (author)

Photovoltaic energy in Mali. Technical and organisational challenges of solar solutions deployment

International Nuclear Information System (INIS)

Lacroix, Olivier; Lesaffre, Dominique

2011-01-01

In 2008, electricity access rate in rural Mali was below 11%. In view of the challenges of electrification and development of rural areas in Mali, solar energy is seen as a strategic technology. The SIDI has asked ENEA to work on the technical and organisational terms ensuring sustainable access and spreading of photovoltaic systems in rural Mali. As such, in this report, ENEA improves the knowledge of the sector's private actors, suggests support architectures tackling the problematic, and highlights critical points by market segments

Turning Weaknesses into Strengths: Nordic Tourism, Potentials for Growth and Major Challenges

Directory of Open Access Journals (Sweden)

Ruhet Genc

2010-03-01

Full Text Available Nordic region is a geographical area which is characterized by a combination of nature, culture, history and technology and regarded as a common entity in political, economical and historical sense. Although rich in its resources, Nordic tourism has not actualized its potential in full. The present paper aims to identify weaknesses of the region, to outline a new set of directions for improving Nordic tourism and to delineate major challenges. Its geographical and natural beauties, cultural characteristics, technological advancement and policy development are identified as assets for tourism advancement in the region. Winter tourism, adventure tourism, nature-based tourism and cultural tourism are demonstrated as potential routes of growth. Marketing strategies and changing trends are discussed as major challenges, with suggestions for implementation.

Challenge Study: A Project-Based Learning on a Wireless Communication System at Technical High School

Science.gov (United States)

Terasawa, Ikuo

2016-01-01

The challenge study is a project based learning curriculum at Technical High School aimed at the construction of a wireless communication system. The first period was engineering issues in the construction of an artificial satellite and the second period was a positional locating system based on the general purpose wire-less device--ZigBee device.…

Technical solutions for low-voltage microgrid concept

Energy Technology Data Exchange (ETDEWEB)

Laaksonen, H.

2011-07-01

Future electricity distribution networks with large amount of distributed energy resources will require creation of a totally new smart grid architecture. The micro grid concept is expected to play a major role in the new smart grid architecture. A special feature of microgrids is that during disturbances in the utility grid they can continue operation automatically in the island mode so that electricity supply to microgrid customers can be continued without any interruption. Thereby, the microgrid concept allows the reliability benefit of distributed energy resources to be realized while also fulfilling the future energy efficiency requirements. In this thesis a total technical concept for low-voltage microgrid which could be integrated into the future smart grids has been developed and specified. The key technical challenges of low-voltage microgrids are the transition to island operation, the power quality management and the microgrid protection especially during island operation. Essential part of the concept development involved the development of solutions and operation principles to these key technical challenges of low-voltage microgrids so that all these solutions would be compatible with each other. The role of one central energy storage unit and the location of it are very important in the developed concept from the low-voltage microgrid management and protection point of view. The development work with the related technical challenges was carried out in this thesis with PSCAD simulation software. PSCAD enabled the examination of a simultaneous interaction of different types of distributed energy resource units and loads both in the normal utility grid connected and in the island operation mode of the microgrid. This information from simulations with multiple component configurations was essential when the technical solutions were developed and these studies could not have been undertaken to this extent in a laboratory environment without major

Approaches to technical and scientific support for the nuclear regulatory body in Belarus

International Nuclear Information System (INIS)

Lobacha, Dmitry J.; Teskeb, Hartmuth

2010-01-01

Approaches to technical and scientific support for the State NPP Program in Belarus are described and compared with the recommendations of the IAEA. The past infrastructure in Belarus did not have specialized technical support organization (TSO) for the nuclear regulatory body. Currently, there are two technical and scientific support centers, nominated by decrees. They are part of the NPP infrastructure and belong to the National Academy of Sciences and the Ministry of Energy. It is a challenge to establish the needed TSO capacities for the nuclear regulatory body (the Ministry for Emergency Situations) inside existing institutions of the Ministry for Emergency Situations (MES). Initially, the new technical support structure could focus on well known topics like emergency preparedness and radiation protection. The scope of work has to be extended to all major aspects of radiation and nuclear safety of the new NPP soon. National education as well as international knowledge transfer are important for that. Tasks and challenges of new technical safety institution(s) are described. (author)

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

Science.gov (United States)

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Technical Writing Teachers and the Challenges of Desktop Publishing.

Science.gov (United States)

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

Science.gov (United States)

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

Dosimetry challenges for implementing emerging technologies

Energy Technology Data Exchange (ETDEWEB)

Yin Fangfang; Oldham, Mark; Cai Jing; Wu Qiuwen, E-mail: Fangfang.yin@duke.ed [Department of Radiation Oncology Duke University Medical Center, Durham, NC 27516 (United States)

2010-11-01

During the last 10 years, radiation therapy technologies have gone through major changes, mainly related introduction of sophisticated delivery and imaging techniques to improve the target localization accuracy and dose conformity. While implementation of these emerging technologies such as image-guided SRS/SBRT, IMRT/IMAT, IGRT, 4D motion management, and special delivery technologies showed substantial clinical gains for patient care, many other factors, such as training/quality, efficiency/efficacy, and cost/effectiveness etc. remain to be challenging. This talk will address technical challenges for dosimetry verification of implementing these emerging technologies in radiation therapy.

Socio-technical Betwixtness

DEFF Research Database (Denmark)

Bossen, Claus

2017-01-01

the intrinsically social and technical interwovenness of design, and the necessity of including affected people and stakeholders in the design process. This betwixtness of socio-technical design is demonstrated by the analysis of two IT systems for healthcare: a foundational model for electronic healthcare records......This chapter focusses on two challenges for socio-technical design: Having to choose between different rationales for design, and the adequate understanding and depiction of the work to be redesigned. These two challenges betwixt the otherwise strong tenets of socio-technical design of pointing out......, and an IT system organizing hospital porters’ work. The conceptual background for the analysis of the cases is provided by a short introduction to different rationales for organizational design, and by pointing to the differences between a linear, rationalistic versus an interactional depiction of work....

Introduction of Geographical Information Systems (GIS) in Technical University Education in Ghana: Challenges and the Way Forward

Science.gov (United States)

Acquah, Prince C.; Asamoah, Jack N.; Konadu, Daniel D.

2017-01-01

Geographic Information System (GIS) continue to play very important role in improving spatial thinking skills of graduates from higher educational institutions. However, teaching and learning of GIS at the technical university level in Ghana remains very limited due to some implementation challenges. This paper reviews the implementation of GIS in…

In vivo (1)H magnetic resonance spectroscopy of amniotic fluid and fetal lung at 1.5 T: technical challenges.

Science.gov (United States)

Kim, Dong-Hyun; Vahidi, Kiarash; Caughey, Aaron B; Coakley, Fergus V; Vigneron, Daniel B; Kurhanewicz, John; Mow, Ben; Joe, Bonnie N

2008-10-01

To identify the major technical challenges associated with in utero single-voxel proton spectroscopy of amniotic fluid and fetal lung and to evaluate the feasibility of performing in utero fetal spectroscopy for fetal lung maturity testing. Fetal magnetic resonance (MR) spectroscopy of amniotic fluid and fetal lung were performed at 1.5 T in 8 near-term pregnant women. Presence/absence of lactate and choline peaks was tabulated. Ex vivo spectra were obtained from amniotic fluid samples to investigate and refine sequence parameters. Spectroscopy failed in 3 of 8 cases due to maternal discomfort (n = 1) or fetal gastroschisis (n = 2). Both fetal motion and low signal-to-noise ratio were limiting factors for the remaining 5 clinical in vivo studies at 1.5 T. Ex vivo and in vivo studies suggested feasibility for detecting lactate from amniotic fluid within a reasonable clinical scan time (4-5 minutes). Lactate was detected in 3 of 5 patients. Choline detection was limited and was detected in 1 patient. Minor motion effects can be overcome but continuous fetal motion is problematic. Lactate detection seems clinically feasible, but choline detection requires additional technical development and, potentially, further imaging at a higher field strength because of the low signal-to-noise ratio at 1.5 T. (c) 2008 Wiley-Liss, Inc.

The importance of fungi and mycology for addressing major global challenges*

OpenAIRE

Lange, Lene

2014-01-01

In the new bioeconomy, fungi play a very important role in addressing major global challenges, being instrumental for improved resource efficiency, making renewable substitutes for products from fossil resources, upgrading waste streams to valuable food and feed ingredients, counteracting life-style diseases and antibiotic resistance through strengthening the gut biota, making crop plants more robust to survive climate change conditions, and functioning as host organisms for production of new...

Challenges to effective crisis management: using information and communication technologies to coordinate emergency medical services and emergency department teams.

Science.gov (United States)

Reddy, Madhu C; Paul, Sharoda A; Abraham, Joanna; McNeese, Michael; DeFlitch, Christopher; Yen, John

2009-04-01

The purpose of this study is to identify the major challenges to coordination between emergency department (ED) teams and emergency medical services (EMS) teams. We conducted a series of focus groups involving both ED and EMS team members using a crisis scenario as the basis of the focus group discussion. We also collected organizational workflow data. We identified three major challenges to coordination between ED and EMS teams including ineffectiveness of current information and communication technologies, lack of common ground, and breakdowns in information flow. The three challenges highlight the importance of designing systems from socio-technical perspective. In particular, these inter-team coordination systems must support socio-technical issues such as awareness, context, and workflow between the two teams.

social & technical innovations

International Development Research Centre (IDRC) Digital Library (Canada)

CHANGE: GAPS BRIDGED BY SMART SOLUTIONS. CHALLENGE: INABILITY TO REACH THOSE IN NEED. SOLAR PANELS. OVERCOME POWER. SUPPLY CHALLENGES. IN BURKINA FASO. SOCIAL & TECHNICAL. INNOVATIONS. BANGLADESH BURKINA FASO ETHIOPIA KENYA LEBANON PERU VIETNAM.

Challenges and Opportunities in Developing the Hawaiian Scientific and Technical Workforce

Science.gov (United States)

Kennedy, James R.

2012-01-01

In searching for dark skies, persistently clear weather, and minimal atmospheric interference, astronomical observing sites are generally located in remote, mountainous locations, and usually far from large communities. Such locations often have weak economies, and shallow workforce pools in the technical and administrative areas generally needed by the observatories. This leads to a problem, and an opportunity, for both the observatories and their local communities. Importing employees from far away locations is costly, leads to high turnover, and deprives the community of economic benefits and the sense of fealty with the observatories that would naturally result if local people occupied these comparatively good paying jobs. While by no means unique, the observatories on Mauna Kea Hawai`i are a clear example of this dual dilemma. This presentation will report findings from a model workforce needs assessment survey of all the Mauna Kea observatories, which has establish likely annual staffing requirements in several categories of technological and administrative support, including the educational entrance requirements. Results indicated that through 2023, 80% of observatory job openings on Hawai`i Island will be in technology and administration. Furthermore, the vast majority of these jobs will require only a two-year or four-year college degree in a relevant field as an entrance requirement. Efforts to realign the existing resources to better meet these common needs will be discussed, including the highly successful partnership between County of Hawai`i Workforce Development Board, the Mauna Kea observatories, the local K-12 systems, Hawai`i Community College, the University of Hawai`i Hilo, and a number of informal education and workplace experience programs. This collaboration has resulted in no fewer than three, interlocked, community programs have stepped up to meet this challenge to the benefit of both the local community and the observatories.

Technical documentation challenges in aviation maintenance : a proceedings report.

Science.gov (United States)

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Training of technical staff and technical staff managers

International Nuclear Information System (INIS)

Moody, G.F.

1991-01-01

The purpose of Technical Staff and Technical Staff Managers training is to provide job skills enhancement to individuals selected to fill key technical positions within a nuclear utility. This training is unique in that unlike other training programs accredited by the National Academy for Nuclear Training, it does not lead to specific task qualification. The problems encountered when determining the student population and curriculum are a direct result of this major difference. Major problems encountered are determining who should attend the training, what amount of training is necessary and sufficient, and how to obtain the best feedback in order to effect substantive program improvements. These topics will be explored and possible solutions discussed

Turning Technologies into Businesses- The Challenge for the Technical Entrepreneur

Science.gov (United States)

Glass, Alexander

2000-03-01

Over the past twenty-five years, new businesses based on innovative technology have been the driving force for the US economy. Due to the abundance of early-stage capital, each year, thousands of scientists and engineers receive support to start new, technology-based businesses. However, the transition from technologist to entrepreneur is often difficult. It requires a shift in emphasis from a technology focus to a market focus. We shall discuss the challenges facing the technical entrepreneur in launching a new enterprise, and a variety of resources that are available to help the entrepreneur succeed. Many technologists fall victim to the myth that if you ``build a better mousetrap, the world will beat a path to your door." To be sure, it is important to base your business on sound technology that offers a clear advantage over current practice, and, if possible, to secure title to the technology, either by obtaining patent protection, or securing an exclusive license. Once that is done, however, the principal concern of the fledgling enterprise is building a business and obtaining the financial resources to enable it to grow. The entrepreneur must develop a clear and compelling business model, that can be communicated to a non-technical investor in a few minutes. This requires a mode of thinking and expression quite different from that commonly used in engineering or scientific discussions. Fortunately, abundant resources are available to help the technologist become a successful entrepreneur. We shall discuss the kinds of assistance that are generally available through local and national programs, and give specific examples based on the activities of the Bay Area Regional Technology Alliance in northern California.

HEP technologies to address medical imaging challenges

CERN Multimedia

CERN. Geneva

2016-01-01

Developments in detector technologies aimed at solving challenges in present and future CERN experiments, particularly at the LHC, have triggered exceptional advances in the performance of medical imaging devices, allowing for a spectacular progress in in-vivo molecular imaging procedures, which are opening the way for tailored therapies of major diseases. This talk will briefly review the recent history of this prime example of technology transfer from HEP experiments to society, will describe the technical challenges being addressed by some ongoing projects, and will present a few new ideas for further developments and their foreseeable impact.

A Case Study in Competitive Technical and Market Intelligence Support and Lessons Learned for the uChemLab LDRD Grand Challenge Project; TOPICAL

International Nuclear Information System (INIS)

SOUTHWELL, EDWIN T.; GARCIA, MARIE L.; MEYERS, CHARLES E.

2001-01-01

The(mu)ChemLab(trademark) Laboratory Directed Research and Development (LDRD) Grand Challenge project began in October 1996 and ended in September 2000. The technical managers of the(mu)ChemLab(trademark) project and the LDRD office, with the support of a consultant, conducted a competitive technical and market demand intelligence analysis of the(mu)ChemLab(trademark). The managers used this knowledge to make project decisions and course adjustments. CTI/MDI positively impacted the project's technology development, uncovered potential technology partnerships, and supported eventual industry partner contacts. CTI/MDI analysis is now seen as due diligence and the(mu)ChemLab(trademark) project is now the model for other Sandia LDRD Grand Challenge undertakings. This document describes the CTI/MDI analysis and captures the more important ''lessons learned'' of this Grand Challenge project, as reported by the project's management team

Technical progress and its strategic consequences

International Nuclear Information System (INIS)

Bouchard, G.

1999-01-01

The history of energy during recent decades has shown that technical progress can have consequences for the organisation of markets, company strategies and the economy in general, confounding all forecasts and going beyond simple technical change. As a consequence for example, improvements in the techniques concerning the exploration and production of hydrocarbons have led to the petrol 'counter-crisis', the reduction in the power of OPEC and undreamed of gains in wealth for certain countries. The progress in gas turbines has led to the reversal of the age-old tendency towards increases in the size of electricity production units and encouraged the liberation of this sector. When looking at the future it is therefore judicious to try and understand the forces at work, and the major trends which result. This is the aim of the articles in this edition of the Revue de l'Energie, published on the occasion of the European colloquium on 'Technical progress faced with the challenges of the energy sector in the future' organised by the Association of Energy Economists. (authors)

El Salvador - Formal Technical Education

Data.gov (United States)

Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

Designing a system for patients controlling providers' access to their electronic health records: organizational and technical challenges.

Science.gov (United States)

Leventhal, Jeremy C; Cummins, Jonathan A; Schwartz, Peter H; Martin, Douglas K; Tierney, William M

2015-01-01

Electronic health records (EHRs) are proliferating, and financial incentives encourage their use. Applying Fair Information Practice principles to EHRs necessitates balancing patients' rights to control their personal information with providers' data needs to deliver safe, high-quality care. We describe the technical and organizational challenges faced in capturing patients' preferences for patient-controlled EHR access and applying those preferences to an existing EHR. We established an online system for capturing patients' preferences for who could view their EHRs (listing all participating clinic providers individually and categorically-physicians, nurses, other staff) and what data to redact (none, all, or by specific categories of sensitive data or patient age). We then modified existing data-viewing software serving a state-wide health information exchange and a large urban health system and its primary care clinics to allow patients' preferences to guide data displays to providers. Patients could allow or restrict data displays to all clinicians and staff in a demonstration primary care clinic, categories of providers (physicians, nurses, others), or individual providers. They could also restrict access to all EHR data or any or all of five categories of sensitive data (mental and reproductive health, sexually transmitted diseases, HIV/AIDS, and substance abuse) and for specific patient ages. The EHR viewer displayed data via reports, data flowsheets, and coded and free text data displayed by Google-like searches. Unless patients recorded restrictions, by default all requested data were displayed to all providers. Data patients wanted restricted were not displayed, with no indication they were redacted. Technical barriers prevented redacting restricted information in free textnotes. The program allowed providers to hit a "Break the Glass" button to override patients' restrictions, recording the date, time, and next screen viewed. Establishing patient

Robot-assisted pyeloplasty for pelvi-ureteric junction obstruction of lower moiety in partial duplex system: A technical challenge

Directory of Open Access Journals (Sweden)

Girdhar S Bora

2016-01-01

Full Text Available Management of pelvi-ureteric junction obstruction (PUJO in a duplex system is technically challenging as dissection at the pelvis may jeopardize the vascularity of the normal moiety ureter. Anastomosing the pelvis to the one single ureter will have a risk of future development of stricture which then will risk both the moieties. Robotic assistance enables appropriate tissue dissection; minimal handling of normal ureter and precision in suturing, overcoming the potential challenges involved in the minimally invasive management of such complex cases. We report the feasibility and efficacy of robot-assisted laparoscopic pyeloplasty in such case.

Deep vadose zone remediation: technical and policy challenges, opportunities, and progress in achieving cleanup endpoints

International Nuclear Information System (INIS)

Wellman, D.M.; Freshley, M.D.; Truex, M.J.; Lee, M.H.

2013-01-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

Deep vadose zone remediation: technical and policy challenges, opportunities, and progress in achieving cleanup endpoints

Energy Technology Data Exchange (ETDEWEB)

Wellman, D.M.; Freshley, M.D.; Truex, M.J.; Lee, M.H. [Pacific Northwest National Laboratory, Richland, Washington (United States)

2013-07-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

Geo synthetics. a remarkable discipline with great achievements in the past and exciting challenges for a bright future

International Nuclear Information System (INIS)

Giroud, J. P.

2014-01-01

This paper presents achievements of the geo synthetics discipline and challenges facing the discipline. The paper shows that one of the main achievements of geo synthetics discipline and challenges facing the discipline. The paper shows that one of the main achievements of geo synthetics is that they have pervaded most branches of geotechnical engineering to the point where it is almost impossible to practice geotechnical engineering without geo synthetics. Then, the paper addresses the challenges facing the geo synthetics discipline. Two major types of challenges are identified: education challenges and technical challenges. Regarding technical challenges, it is recommended that researchers focus on behaviors that are not traditionally considered in geotechnical engineering in order to use geo synthetics to their full potential. Note: this is a significantly expanded version of the keynote paper presented at the 2008 GeoAmericas Conferences. (Author)

Teaching Technical Writing - Towards Technical Writing

DEFF Research Database (Denmark)

Kastberg, Peter

2000-01-01

In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

Emerging Water Contaminants: Technical, Legal and Policy Challenges

Science.gov (United States)

Deeb, R. A.; Kresic, N.; Laugier, M. C.; Kavanaugh, M. C.

2002-12-01

Approximately 120 new chemicals are created each year due to ever-improving industry and technology markets. Releases of new contaminants into the environment can occur during production, use and disposal of these chemicals thereby leading to potential contamination of water supply sources. Very few emerging contaminants are regulated. In addition, knowledge gaps regarding emerging contaminants include lack health effects, occurrence (either because these compounds are not measured or because concentrations are below detection limits of readily available analytical techniques) and fate and transport in the environment especially with regards to mobility and persistence. The sources of these compounds are numerous. One source is treated wastewater, which is re-injected into groundwater aquifers for indirect potable reuse purposes. Emerging compounds of concern can be classified in various classes. This presentation will focus on contaminants, which have emerged in the last 10 years including pharmaceuticals (antibiotics/drugs), personal care products (polycyclic musks), pesticides/herbicides, industrial solvents (1,4-dioxane), gasoline additives (MTBE), disinfection byproducts such as NDMA (N-nitrosodimethylamine), and inorganic compounds such as perchlorate and arsenic. This presentation will present technical, legal and legislative challenges posed by the presence of these contaminants in water. Background information including chemical's history of use, sources in the environments, nationwide occurrence, physical and chemical properties, behavior in the environment and technologies for removal from soil and water will be presented. In addition, case studies on MTBE, pharmaceuticals and personal care products, 1,4-dioxane, arsenic and NDMA will be discussed.

A qualitative exploration of the major challenges facing pharmacovigilance in Saudi Arabia.

Science.gov (United States)

Aljadhey, Hisham; Mahmoud, Mansour A; Alshammari, Thamir M; Al-Dhaeefi, Mohammed; Le Louet, Herve; Perez-Gutthann, Susana; Pitts, Peter J

2015-09-01

To explore the challenges facing pharmacovigilance in Saudi Arabia and formulate recommendations to improve it from the perspective of healthcare professionals in Saudi Arabia. This was a qualitative study of 4 focus group discussions with pharmacists, physicians, and academicians held under the auspices of the King Saud University School of Pharmacy and the Center for Medicine in the Public Interest, Riyadh, Saudi Arabia. A total of 29 eligible healthcare professionals were invited to participate in the discussion. The predefined themes of the study were the current practice and major challenges facing pharmacovigilance in regulatory bodies, hospitals, the community, and academia, as well as recommendations to improve pharmacovigilance practice.  Of the 29 participants invited, 27 attended the discussion. Challenges facing regulatory bodies included complicated adverse drug reactions (ADR) reporting forms, lack of feedback on ADRs submitted to the Saudi Food and Drug Authority, lack of decisions from the local authority to withdraw medications, and lack of data on pharmacovigilance. The challenges to pharmacovigilance in hospitals included the lack of knowledge of the significance of ADR reporting, workload, blaming culture, and lack of collaboration between regulatory bodies and hospitals. However, challenges facing pharmaceutical industries included the lack of drug manufacturers in Saudi Arabia and lack of interest in pharmacovigilance. Recommendations to improve pharmacovigilance included the need for communication, stronger regulatory requirements, the need for research, the need for unified ADRs reporting, and continuous education and training.  The study has identified the challenges facing pharmacovigilance in Saudi Arabia and made certain recommendations to overcome them. These recommendations might be helpful for regulatory bodies to enhance spontaneous reporting and promote pharmacovigilance.

Globalizing Technical Communication Programs: Visions, Challenges, and Emerging Directions

DEFF Research Database (Denmark)

Maylath, Bruce; Mousten, Birthe; Vandepitte, Sonia

Speakers Maylath, Mousten and Vandepitte, co-authors of two chapters on what they call the Trans-Atlantic Project, will describe the programmatic framework for establishing the collaborative partnerships in which students studying technical writing in the U.S. work with students studying...... help achieve common program objectives, particularly in regard to intercultural negotiation and mediation processes. In addition, they will describe how they met course-specific objectives. For the technical writing course, such objectives included broadening students' awareness of the needs of readers...... translation in Europe to create procedural documents in Danish, Dutch, English, French, German and/or Italian. They will provide guidelines for  how international partnerships of this kind can be established between technical communication programs and translation programs anywhere, even in the abscence...

An Approach to Tailoring Major Technical Reviews Based on Project Characteristics and Stakeholder Interests

Science.gov (United States)

Richstein, Alan B.; Nolte, Jerome T.; Pfarr, Barbara B.

2004-01-01

There are numerous technical reviews that occur throughout the systems engineering process life cycle. Many are well known by project managers and stakeholders such as developers and end users, an example of much is the critical design review (CDR). This major milestone for a large, complex new project may last two or more days, include an extensive agenda of topics, and entail hundreds of hours of developer time to prepare presentation materials and associated documents. Additionally, the weeks of schedule spent on review preparation is at least partly at the expense of other work. This paper suggests an approach for tailoring technical reviews, based on the project characteristics and the project manager s identification of the key stakeholders and understanding of their most important issues and considerations. With this insight the project manager can communicate to, manage expectations oc and establish formal agreement with the stakeholders as to which reviews, and at what depth, are most appropriate to achieve project success. The authors, coming from diverse organizations and backgrounds, have drawn on their personal experiences and summarized the best practices of their own organizations to create a common framework to provide guidance on the adaptation of design reviews to other system engineers.

Challenges and solutions for climate change

CERN Document Server

Gaast, Wytze

2012-01-01

The latest scientific knowledge on climate change indicates that higher greenhouse gas concentrations in the atmosphere through unchecked emissions will provoke severe climate change and ocean acidification threatening environmental structures on which humanity relies. Climate change therefore poses major socio-economic, technical and environmental challenges which will have serious impacts on countries’ pathways towards sustainable development. As a result, climate change and sustainable development have increasingly become interlinked. A changing climate makes achieving Millennium Development Goals more difficult and expensive, so there is every reason to achieve development goals with low greenhouse gas emissions. This leads to the following five challenges discussed by Challenges and Solutions for Climate Change: To place climate negotiations in the wider context of sustainability, equity and social change so that development benefits can be maximised at the same time as decreasing greenhouse gas emissi...

The impact of technical specification surveillance requirements and allowable outage times on plant availability

International Nuclear Information System (INIS)

Webster, S.A.; Finnicum, D.J.

1985-01-01

Surveillances required to be conducted by a plant's Technical Specifications have resulted in plant shutdowns and lost availability. This paper looks at shutdowns which have occurred due to required surveillance testing and insufficient repair time allowed by Technical Specifications. A loss of plant availability of almost 3% per plant year was found for U.S. pressurized water reactors during the five year period, 1979 to 1984. This figure excludes major problems which required plant shutdown whether or not mandated by the Technical Specifications. In addition to their affect on availability, such shutdowns can add to the challenges to plant safety systems and can affect plant aging by increasing the thermal cycles on plant components

Scientific and technical challenges of radioactive waste management

International Nuclear Information System (INIS)

Vira, J.

1996-01-01

In spite of considerable spending on research and technical development, the management of nuclear wastes continues to be a difficult issue in public decision making. The nuclear industry says that it has safe solutions for the ultimate disposal of nuclear wastes, but the message has not really got through to the public at large. Although communications problems reflect the general stigmatization of nuclear power, there are obvious issues in safety and performance assessment of nuclear waste disposal which evade scientific resolution. Any scientist is concerned for his personal credibility must respect the rules and limits of scientific practice, but the intriguing question is whether he would not do better to address the layman's worries about radioactive substances? The discussion in this paper points out the intricacies of the distinction between scientific proof and judgement, with emphasis on safety assessment for nuclear waste disposal. Who are the final arbitrators? In a democratic society it is probably those who vote.Building confidence in expert judgements is a challenge for waste managers and scientists. The media may create their own 'experts', whose only necessary credential is the trust of their audience, but scientific judgements must stand the test of time.'Confidence building' is currently a key word on the whole nuclear waste management scene, and confidence in science and scientists is certainly needed for any progress towards practical implementation of plans. The means for building confidence in the decision-making process are probably different from those applied for science and scientists. (author)

Hypertension in Developing Countries: A Major Challenge for the Future.

Science.gov (United States)

Mohsen Ibrahim, M

2018-05-01

Outline recent epidemiologic data regarding hypertension in developing countries, distinguish differences from developed countries, and identify challenges in management and future perspectives. Increased sugar intake, air and noise pollution, and low birth weight are emerging hypertension risk factors. The major challenges in management are difficulties in accurate diagnosis of hypertension and adequate blood pressure control. In contrast to developed countries, hypertension prevalence rates are on the rise in developing countries with no improvement in awareness or control rates. The increasing burden of hypertension is largely attributable to behavioral factors, urbanization, unhealthy diet, obesity, social stress, and inactivity. Health authorities, medical societies, and drug industry can collaborate to improve hypertension control through education programs, public awareness campaigns, legislation to limit salt intake, encourage generic drugs, development and dissemination of national guidelines, and involving nurses and pharmacists in hypertension management. More epidemiologic data are needed in the future to identify reasons behind increased prevalence and poor blood pressure control and examine trends in prevalence, awareness, treatment, and control. National programs for better hypertension control based on local culture, economic characteristics, and available resources in the population are needed. The role of new tools for hypertension management should be tested in developing world.

Challenges of technical cooperation in the petroleum industry

International Nuclear Information System (INIS)

Al-Athel, S.A.

1992-01-01

The need and prospects for international technical cooperation in the petroleum industry are reviewed. Since it directly affects the survival of the inhabitants of the planet, environmental protection is a field that could enjoy maximum international cooperation; oil spills, product environmental hazards, waste minimization and disposal and oil field fires are the main areas identified. Technical cooperation in other areas of the industry, namely exploration, production, oil field development, refining and petrochemicals, may involve some controversy. Attention is drawn to the conflicting interests of multinational companies, who almost completely control the technology of these activities, and host developing countries. It is advocated that arrangements involving technology transfer should make provision for the growth of indigenous technology. (UK)

Report on the INMM Workshop on preparing for nuclear arms reductions to address technical transparency and verification challenges

International Nuclear Information System (INIS)

Dreicer, M.; Dalnoki-Veress, F.; Lewis, P.

2013-01-01

In May 2011, a workshop was held to develop broader awareness of the technical and operational challenges that could be used to enhance effective transparency and/or verification in the medium to long-term. Building confidence in a broader multi-lateral engagement scenario adds even greater challenges than the traditional bi-lateral approaches. The multi-disciplinary group that attended included decision-makers needing to understand present and possible future technical capabilities, and the technical community needing clearer definition of possible requirements and operational constraints. In additional to traditional presentations, the group conducted an exercise to stimulate new perspectives on verification requirements for a scenario based on nuclear arms reductions at very low numbers of nuclear weapons. The workshop participants were divided into two groups and asked to explore the political and technical requirements needed for States to move towards significant arms reductions. Using a technique called 'back-casting' participants were asked to imagine a world without nuclear weapons and describe what would be needed to achieve levels of one thousand, one hundred, ten, and ultimately zero weapons in the world. Most participants agreed that a strong political commitment will be necessary and that complete disarmament will only be possible if states are convinced that nuclear weapons serve no purpose. Both groups believed that a time period of greater instability would be encountered when moving from 1000 to 100 nuclear weapons and that it would be imperative to accelerate quickly through this period. The group discussed the need to have an international body monitor the disarmament process to maintain legitimacy for the international community. One possibility could be the development of an intergovernmental panel on verification and disarmament to monitor and facilitate disarmament. The groups recognized the problem of fissile material disposition after

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities

Directory of Open Access Journals (Sweden)

Il-Hoon Cho

2017-09-01

Full Text Available The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods. Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities.

Science.gov (United States)

Cho, Il-Hoon; Ku, Seockmo

2017-09-30

The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods). Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Technical and management challenges associated with structural materials degradation in nuclear reactors in the future

International Nuclear Information System (INIS)

Ford, F.P.

2007-01-01

There are active plans worldwide to increase nuclear power production by significant amounts. In the near term (i.e. by 2020) this will be accomplished by, (a) increasing the power output of the existing reactors and extending their life, and by, (b) constructing new reactors that are very similar to the current water-cooled designs. Beyond 2025-2030, it is possible that new reactors (i.e. the 'GEN IV' designs) will be very different from those currently in service. A full discussion of the technical and management concerns associated with materials degradation that might arise over the next 40 years would need to address a wide range of topics. Quite apart from discussing the structural integrity issues for the materials of construction and the fuel cladding, the debate would also need to cover, for example, fuel resources and the associated issues of fuel cycle management and waste disposal, manufacturing capacity, inspection capabilities, human reliability, etc., since these all impact to one degree or another on the choice of material and the reactor operating conditions. For brevity, the scope of this article is confined to the integrity of the materials of construction for passive components in the current water-cooled reactors and the evolutionary designs (which will dominate the near term new constructions), and the very different GEN IV reactor designs. In all cases the operating environments will be more aggressive than currently encountered. For instance, the concerns for flow accelerated corrosion and flow-induced vibration will be increased under extended power uprate conditions for the current water-cooled reactors. Of greater concern, the design life will be at least 60 years for all of the new reactors and for those current reactors operating with extended licenses. This automatically presents challenges with regard to managing both irradiation damage in metallic and non-metallic materials of construction, and environmentally assisted cracking. This

Developing Technical Skill Assessments

Science.gov (United States)

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

Babesia major: protection of intact calves against homologous challenge by the injection of irradiated piroplasms

International Nuclear Information System (INIS)

Purnell, R.E.; Lewis, D.; Brocklesby, D.W.

1979-01-01

Blood from a splenectomized calf infected with Babesia major was divided into 20 ml aliquots which were γ-irradiated at doses of 0, 23.3, 27.3, 31.4, 35.4 and 39.5 krad and then inoculated into groups of three intact calves. Animals receiving non-irradiated blood had typical mild B. major reactions, but those receiving blood irradiated at 23.3, 27.3 and 31.4 krad and 2 of 3 receiving blood irradiated at 35.4 krad had minimal reactions. The remaining 4 animals had no detectable parasitaemic reactions. When the calves were challenged with a similar number (6.0 x 10 9 ) of homologous parasites, they were all immune with the exception of the 4 animals which had not reacted initially. The immune status of individual cattle was reflected accurately in the results of the micro-ELISA test, which detected a significant rise in serum antibody titre of the 4 susceptible animals 7 days after challenge. (author)

Babesia major: protection of intact calves against homologous challenge by the injection of irradiated piroplasms

Energy Technology Data Exchange (ETDEWEB)

Purnell, R E; Lewis, D; Brocklesby, D W [Agricultural Research Council, Compton (UK). Inst. for Research on Animal Diseases

1979-02-01

Blood from a splenectomized calf infected with Babesia major was divided into 20 ml aliquots which were ..gamma..-irradiated at doses of 0, 23.3, 27.3, 31.4, 35.4 and 39.5 krad and then inoculated into groups of three intact calves. Animals receiving non-irradiated blood had typical mild B. major reactions, but those receiving blood irradiated at 23.3, 27.3 and 31.4 krad and 2 of 3 receiving blood irradiated at 35.4 krad had minimal reactions. The remaining 4 animals had no detectable parasitaemic reactions. When the calves were challenged with a similar number (6.0 x 10/sup 9/) of homologous parasites, they were all immune with the exception of the 4 animals which had not reacted initially. The immune status of individual cattle was reflected accurately in the results of the micro-ELISA test, which detected a significant rise in serum antibody titre of the 4 susceptible animals 7 days after challenge.

International conference on challenges faced by technical and scientific support organizations in enhancing nuclear safety. Contributed papers and presentations

International Nuclear Information System (INIS)

2007-01-01

Over the past two decades, the IAEA has conducted a series of major conferences that have addressed topical issues and strategies critical to nuclear safety for consideration by the world's nuclear regulators. More recently, the IAEA organized the International Conference on Effective Nuclear Regulatory Systems - Facing Safety and Security Challenges, held in Moscow in 2006. The Moscow conference was the first of its kind, because it brought together senior regulators of nuclear safety, radiation safety and security from around the world to discuss how to improve regulatory effectiveness with the objective of improving the protection of the public and the users of nuclear and radioactive material. The International Conference on Challenges Faced by Technical and Scientific Support Organizations in Enhancing Nuclear Safety was held in Aix-en-Provence, France, from 23 to 27 April 2007. This conference, again, was the first of its kind, because it was the first to address technical and scientific support organizations (TSOs), the role they play in supporting either the national regulatory bodies or the industry in making optimum safety decisions and the challenges they face in providing this support. This conference provided a forum for the TSOs to discuss these and other issues with the organizations to which they provide this support - that is, the regulators and the operators/industry - as well as with other stakeholders such as research organizations and public authorities. This conference can also be considered to have a link to the Moscow conference. The Moscow conference concluded that effective regulation of nuclear safety is vital for the safe use of nuclear energy and associated technologies, both now and in the future, and is an essential prerequisite for establishing an effective Global Nuclear Safety Regime. The Moscow conference also highlighted the importance of continued and improved international cooperation in the area of nuclear safety. These

Research of design challenges and new technologies for floating LNG

Directory of Open Access Journals (Sweden)

Dong-Hyun Lee

2014-06-01

Full Text Available With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO. The global Floating LNG (FLNG market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

What Are the Lived Challenges Experienced by Black Females in a STEM Doctoral Program at a Majority White Institution?

Science.gov (United States)

Cleare, Sharlane S.

The purpose of this study is to explore the challenges experienced by Black female STEM doctoral students at a Majority White Institution. This study examined how, and to what extent did the Majority White Institution's STEM environment influenced such challenges. The qualitative phenomenological approach to this investigation utilized the lenses of Black Feminist Thought and Critical Race Feminism Theoretical Frameworks as interconnected lenses by which to conceptualize this phenomenon. This study answered the following question: What are the lived challenges experienced by Black female in a STEM doctoral program at a Majority White Institution? Purposeful and snowball sampling were employed to recruit participants for this investigation. Both sampling methods were selected because of their wide use in qualitative investigations, as well as their proven ability to precisely source quality participants (Biernacki, & Waldorf,1981; Palinkas, Horwitz, Green, Wisdom, Duan, & Hoagwood, (2015). Observations, in-depth semi-structured interviews, and focus groups were conducted with eleven (11) Black females STEM doctoral students currently studying at a large Majority White Institution in the Midwest. The findings from this study suggest that this is a phenomenon worthy of considerable attention. Research in the area of Black females in STEM doctoral programs at Majority White Institutions can be further expanded and updated. Therefore, this study will contribute and supplement existing literature on Black females in STEM doctoral programs at Majority White Institutions. Most importantly, the results obtained from this study can assist Majority White Institutions in the development and enhancement of programs and policies specifically geared towards addressing the needs of this underrepresented minority population segment.

Transplantation of Bioprinted Tissues and Organs: Technical and Clinical Challenges and Future Perspectives.

Science.gov (United States)

Ravnic, Dino J; Leberfinger, Ashley N; Koduru, Srinivas V; Hospodiuk, Monika; Moncal, Kazim K; Datta, Pallab; Dey, Madhuri; Rizk, Elias; Ozbolat, Ibrahim T

2017-07-01

: Three-dimensional (3D) bioprinting is a revolutionary technology in building living tissues and organs with precise anatomic control and cellular composition. Despite the great progress in bioprinting research, there has yet to be any clinical translation due to current limitations in building human-scale constructs, which are vascularized and readily implantable. In this article, we review the current limitations and challenges in 3D bioprinting, including in situ techniques, which are one of several clinical translational models to facilitate the application of this technology from bench to bedside. A detailed discussion is made on the technical barriers in the fabrication of scalable constructs that are vascularized, autologous, functional, implantable, cost-effective, and ethically feasible. Clinical considerations for implantable bioprinted tissues are further expounded toward the correction of end-stage organ dysfunction and composite tissue deficits.

Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

Energy Technology Data Exchange (ETDEWEB)

Stepanauskas, Ramunas

2011-10-13

DOE JGI's Tanja Woyke, chair of the Single Cells and Metagenomes session, delivers an introduction, followed by Bigelow Laboratory's Ramunas Stepanauskas on "Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora.

Science.gov (United States)

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2016-10-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets ( e.g. , application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes.

World Solar Challenge 1993 Technical Report. Part 1. Darwin to Adelaide. (November 7-November 16, 1993)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-01-01

This is a report of the above-named solar car race from Darwin to Adelaide, Australia. On January 7, 1983, an Australian adventurer Mr. Hans Tholstrup succeeded in running from the Australian west coast to Sydney in a car driven solely by solar energy. The travel took 20 days, at an average speed of 23km per hour. The technology has made remarkable advances since his success and, in the World Solar Challenge 1993 held in November 1993, a Honda team crossed the Australian Continent at an average speed of 85km per hour. Technical challenges included the development of maximum-output solar cell panels, a car designed to make full use of such power, and a run at the maximum possible speed, all these dependent solely on the sun as energy source. This report Part I contains the details of the race, analysis, aerodynamics, car body structure, manufacture, materials, and so forth. (NEDO)

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

Science.gov (United States)

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

Playing on strengths : technical innovations keep Canadian industry on top

International Nuclear Information System (INIS)

Harvie, W.

1997-01-01

The Western Canada Sedimentary Basin is one of Canada's major petroleum regions. Some fields in the region have been in production for 80 years. Since most of the major discoveries have been made, the challenge today is to use new technologies to find smaller reservoirs and to extract as much oil as possible from the depleting reserves. The following technical innovations were developed by Canadian companies for enhanced oil recovery: (1) steam assisted gravity drainage for heavy oil, (2) horizontal drilling, (3) coiled tube drilling, (4) single well steam assisted gravity drainage, (5) hydrocyclone technology in which briny water is sent down the borehole for reinjection and in which centrifugal force sends the lighter oil to the middle of the hydrocyclone where it is collected, and (6) portable top drives aimed at newer versions of large land drilling rigs and offshore operations. Multi-lateral techniques have also been used to increase production on heavy oil properties. These and other technical innovations are recognized as the single best advantage that Canadians have to offer the global marketplace. 4 figs

ITER safety challenges and opportunities

International Nuclear Information System (INIS)

Piet, S.J.

1992-01-01

This paper reports on results of the Conceptual Design Activity (CDA) for the International Thermonuclear Experimental Reactor (ITER) suggest challenges and opportunities. ITER is capable of meeting anticipated regulatory dose limits, but proof is difficult because of large radioactive inventories needing stringent radioactivity confinement. Much research and development (R ampersand D) and design analysis is needed to establish that ITER meets regulatory requirements. There is a further oportunity to do more to prove more of fusion's potential safety and environmental advantages and maximize the amount of ITER technology on the path toward fusion power plants. To fulfill these tasks, three programmatic challenges and three technical challenges must be overcome. The first step is to fund a comprehensive safety and environmental ITER R ampersand D plan. Second is to strengthen safety and environment work and personnel in the international team. Third is to establish an external consultant group to advise the ITER Joint Team on designing ITER to meet safety requirements for siting by any of the Parties. The first of three key technical challenges is plasma engineering - burn control, plasma shutdown, disruptions, tritium burn fraction, and steady state operation. The second is the divertor, including tritium inventory, activation hazards, chemical reactions, and coolant disturbances. The third technical challenge is optimization of design requirements considering safety risk, technical risk, and cost

Percutaneous Image-Guided Cryoablation of Challenging Mediastinal Lesions Using Large-Volume Hydrodissection: Technical Considerations and Outcomes

Energy Technology Data Exchange (ETDEWEB)

Garnon, Julien, E-mail: juliengarnon@gmail.com; Koch, Guillaume, E-mail: Guillaume.koch@gmail.com; Caudrelier, Jean, E-mail: caudjean@yahoo.fr [University Hospital of Strasbourg, Department of Interventional Radiology (France); Ramamurthy, Nitin, E-mail: Nitin-ramamurthy@hotmail.com [Norfolk and Norwich University Hospital, Department of Radiology (United Kingdom); Rao, Pramod, E-mail: pramodrao@me.com [University of Strasbourg, ICube (France); Tsoumakidou, Georgia, E-mail: Georgia.tsoumakidou@chru-strasbourg.fr; Cazzato, Roberto Luigi, E-mail: cazzatorobertoluigi@gmail.com; Gangi, Afshin, E-mail: Afshin.gangi@chru-strasbourg.fr [University Hospital of Strasbourg, Department of Interventional Radiology (France)

2016-11-15

ObjectiveThis study was designed to describe the technique of percutaneous image-guided cryoablation with large-volume hydrodissection for the treatment of challenging mediastinal lesions.MethodsBetween March 2014 and June 2015, three patients (mean age 62.7 years) with four neoplastic anterior mediastinal lesions underwent five cryoablation procedures using large-volume hydrodissection. Procedures were performed under general anaesthesia using CT guidance. Lesion characteristics, hydrodissection and cryoablation data, technical success, complications, and clinical outcomes were assessed using retrospective chart review.ResultsLesions (mean size 2.7 cm; range 2–4.3 cm) were in contact with great vessels (n = 13), trachea (n = 3), and mediastinal nerves (n = 6). Hydrodissection was performed intercostally (n = 4), suprasternally (n = 2), transsternally (n = 1), or via the sternoclavicular joint (n = 1) using 1–3 spinal needles over 13.4 (range 7–26) minutes; 450 ml of dilute contrast was injected (range 300–600 ml) and increased mean lesion-collateral structure distance from 1.9 to 7.7 mm. Vulnerable mediastinal nerves were identified in four of five procedures. Technical success was 100 %, with one immediate complication (recurrent laryngeal nerve injury). Mean follow-up period was 15 months. One lesion demonstrated residual disease on restaging PET-CT and was retreated to achieve complete ablation. At last follow-up, two patients remained disease-free, and one patient developed distant disease after 1 year without local recurrence.ConclusionsCryoablation using large-volume hydrodissection is a feasible technique, enabling safe and effective treatment of challenging mediastinal lesions.

Citation analysis of Computer Standards & Interfaces: Technical or also non-technical focus?

NARCIS (Netherlands)

G. van de Kaa (Geerten); H.J. de Vries (Henk); B. Baskaran (Balakumaran)

2015-01-01

textabstractThis paper analyzes to which extent research published in Computer Standards & Interfaces (CSI) has a technical focus. We find that CSI has been following its scope very closely in the last three years and that the majority of its publications have a technical focus. Articles published

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

Science.gov (United States)

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

Challenges new entrant countries face in establishing a nuclear program

International Nuclear Information System (INIS)

Brister, J.

2012-01-01

Challenges new entrant countries face in establishing a nuclear programme are distilled into four major categories: human resource development, financing, infrastructure and process. In implementing a successful nuclear programme role of the government is key to success. It requires clear and sustained policy support, international and bilateral agreements, developing the depth required of technical skills and infrastructure, proven delivery programme, management of radioactive waste and spent fuel, decommissioning and electricity market regulation.

Optics fabrication technical challenges

International Nuclear Information System (INIS)

Chabassier, G.; Ferriou, N.; Lavastre, E.; Maunier, C.; Neauport, J.; Taroux, D.; Balla, D.; Fornerod, J.C.

2004-01-01

Before the production of all the LMJ (MEGAJOULE laser) optics, the CEA had to proceed with the fabrication of about 300 large optics for the LIL (laser integration line) laser. Thanks to a fruitful collaboration with high-tech optics companies in Europe, this challenge has been successfully hit. In order to achieve the very tight requirements for cleanliness, laser damage threshold and all the other high demanding fabrication specifications, it has been necessary to develop and to set completely new fabrication process going and to build special outsize fabrication equipment. Through a couple of examples, this paper gives an overview of the work which has been done and shows some of the results which have been obtained: continuous laser glass melting, fabrication of the laser slabs, rapid-growth KDP (potassium dihydrogen phosphate) technology, large diffractive transmission gratings engraving and characterization. (authors)

Energy infrastructure in Yugoslavia: the past and challenges ahead

International Nuclear Information System (INIS)

IIic, M.; Calovic, M.; Mijuskovic, N.

2002-01-01

In this paper an assessment of major changes in managing electric energy system of former Yugoslavia are assessed by providing specific data on energy sources prior to 1990 and after it. The data represent a textbook example of a planning and operating paradigm shift from cooperation among loosely connected entities to an operating paradigm in which the newly formed entities make their energy decisions in a rather decentralized, somewhat competitive way. The effect of this shift on the overall energy situation in the newly formed entities is illustrated. Technically, the case is very illustrative of challenges in moving from an infrastructure designed for one type of coordination to the infrastructure in which this cooperation is no longer assumed and changes in infrastructure (in this case, transmission and generation additions) are needed. The paper suggests careful assessment of this process from both technical and economic/regulatory/environmental points of view in order to make meaningful decisions in face of such major challenges. An important recognition in the paper is that conceptually the process discussed here is very related to a typical process as some other parts of the world undergo electricity industry restructuring. In this sense, the modeling, analysis and decision making tools under development for the energy industry under restructuring are useful to keep in mind when moving forward with the energy solutions in the Balkans after the war. (author)

Bio-methane. Challenges and technical solutions

International Nuclear Information System (INIS)

Blaisonneau, Laurent; Carlu, Elieta; Feuillette, Vincent

2012-06-01

Among the new energy sectors in development, biogas has many benefits: several valorization possibilities (bio-methane, electricity and heat), continuous production, easy storage. In Europe, and particularly in France, the bio-methane market will be in the next years a driver for the improvement of the economic, environmental and social performance of the actors of the value chain of biogas. ENEA releases a report on the current state of the bio-methane market in Europe. This publication mainly describes: An outlook of the market evolution and the corresponding stakes for the actors of this sector, the technical and economic characteristics, maturity level and specificities of each biogas upgrading process, An analysis of the French regulatory framework for bio-methane injection into the grid

New challenges for Sportis Scientific Technical Journal

Directory of Open Access Journals (Sweden)

Víctor Arufe Giráldez

2015-09-01

Full Text Available In the publishing of this issue we want to advance two major events, the first of which is to inform the Sportis Magazine will from September 1, part of official scientific journal of the University of A Coruña, with this integration It aims to improve the dissemination of the journal in the most prestigious data bases of international level and contribute to the visibility of the University of A Coruña as committed to research in school sports college, psychomotor and Physical Education.The second story that we want to give is that the November 5-7 will be held at the Faculty of Education at the University of A Coruna, the V World Congress of Sports, Physical Education and Psychomotor School. You can participate by presenting a communication, poster or virtual poster, the best papers will be invited to publish their work as research article in the following issues of the magazine. Disponéis more information on the web www.sportis.es.In this third and final issue of the year, we beat record of article, in part due to the increase in the number of items received, a total of 10 works by experts and professionals from different countries will be published. Some of the issues addressed are: first aid teacher training, the attitude toward students with disabilities, futsal, using accelerometers, bodyboard training in young, innovative proposals such as the teaching unit based Hypopressive method, aquatic motor skills, study of sports organizations, studies involving different experts from different countries, analysis of skills in physical education ... Undoubtedly an interesting number to enjoy a good coffee or tea and gain greater technical and scientific knowledge.All equipment Sportis want is your pleasure this new publication and invite you to submit your work for future issues.Receive a warm greeting,Prof. Dr. Victor Arufe GiráldezChief Editor Sportis. International Journal of School Sports, Physical Education and Psychomotor

Mechanism analysis on nuclear technical relocation of the major countries

International Nuclear Information System (INIS)

1985-12-01

This report is about cooperation method of nuclear energy among the USA, France and Canada. So it deals with building a cooperative system on nuclear technical relocation, researching a foreign policy on nuclear energy of the USA and cooperation method and cooperation trend of Japan, Canada, Russia, China and West Germany.

2005 the North American Solar Challenge

Energy Technology Data Exchange (ETDEWEB)

Dan Eberle

2008-12-22

In July 2005 the North American Solar Challenge (NASC) featured university built solar powered cars ran across the United States into Canada. The competition began in Austin, Texas with stops in Weatherford, Texas; Broken Arrow, Oklahoma; Topeka, Kansas; Omaha, Nebraska; Sioux Falls, South Dakota, Fargo, North Dakota; Winnipeg, Manitoba; Brandon, Manitoba; Regina, Saskatchewan; Medicine Hat, Alberta; mainly following U.S. Highway 75 and Canadian Highway 1 to the finish line in Calgary, Alberta, Canada, for a total distance of 2,500 miles. NASC major sponsors include the U.S. Department of Energy (DOE), Natural Resources Canada and DOEs National Renewable Energy Laboratory. The event is designed to inspire young people to pursue careers in science and engineering. NASCs predecessors, the American Solar Challenge and Sunrayce, generally have been held every two years since 1990. With each race, the solar cars travel faster and further with greater reliability. The NASC promotes: -Renewable energy technologies (specifically photovoltaic or solar cells) -Educational excellence in science, engineering and mathematics -Creative integration of technical and scientific expertise across a wide-range of disciplines -Hands-on experience for students and engineers to develop and demonstrate their technical and creative abilities. Safety is the first priority for the NASC. Each team put its car through grueling qualifying and technical inspections. Teams that failed to meet the requirements were not allowed participate. During the race, each team was escorted by lead and chase vehicles sporting rooftop hazard flashers. An official observer accompanied each solar car team to keep it alert to any safety issues.

Interoperability in healthcare: major challenges in the creation of the enterprise environment

Science.gov (United States)

Lindsköld, L.; Wintell, M.; Lundberg, N.

2009-02-01

There is today a lack of interoperability in healthcare although the need for it is obvious. A new healthcare enterprise environment has been deployed for secure healthcare interoperability in the Western Region in Sweden (WRS). This paper is an empirical overview of the new enterprise environment supporting regional shared and transparent radiology domain information in the WRS. The enterprise environment compromises 17 radiology departments, 1,5 million inhabitants, using different RIS and PACS in a joint work-oriented network and additional cardiology, dentistry and clinical physiology departments. More than 160 terabytes of information are stored in the enterprise repository. Interoperability is developed according to the IHE mission, i.e. applying standards such as Digital Imaging and Communication in Medicine (DICOM) and Health Level 7 (HL7) to address specific clinical communication needs and support optimal patient care. The entire enterprise environment is implemented and used daily in WRS. The central prerequisites in the development of the enterprise environment in western region of Sweden were: 1) information harmonization, 2) reuse of standardized messages e.g. HL7 v2.x and v3.x, 3) development of a holistic information domain including both text and images, and 4) to create a continuous and dynamic update functionality. The central challenges in this project were: 1) the many different vendors acting in the region and the negotiations with them to apply communication roles/profiles such as HL7 (CDA, CCR), DICOM, and XML, 2) the question of whom owns the data, and 3) incomplete technical standards. This study concludes that to create a workflow that runs within an enterprise environment there are a number of central prerequisites and challenges that needs to be in place. This calls for negotiations on an international, national and regional level with standardization organizations, vendors, health management and health personnel.

Connectivity inference from neural recording data: Challenges, mathematical bases and research directions.

Science.gov (United States)

Magrans de Abril, Ildefons; Yoshimoto, Junichiro; Doya, Kenji

2018-06-01

This article presents a review of computational methods for connectivity inference from neural activity data derived from multi-electrode recordings or fluorescence imaging. We first identify biophysical and technical challenges in connectivity inference along the data processing pipeline. We then review connectivity inference methods based on two major mathematical foundations, namely, descriptive model-free approaches and generative model-based approaches. We investigate representative studies in both categories and clarify which challenges have been addressed by which method. We further identify critical open issues and possible research directions. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

CE Challenges : Work to Do

NARCIS (Netherlands)

Stjepandic, J; Verhagen, W.J.C.; Wognum, P.M.

2015-01-01

CE has been used for more than two decades now. Despite many successes and advantages, there are still many challenges to be addressed. These challenges are both technical and organisational. In the paper we will address the current challenges of CE. Many challenges

ITER safety challenges and opportunities

International Nuclear Information System (INIS)

Piet, S.J.

1991-01-01

Results of the Conceptual Design Activity (CDA) for the International Thermonuclear Experimental Reactor (ITER) suggest challenges and opportunities. ''ITER is capable of meeting anticipated regulatory dose limits,'' but proof is difficult because of large radioactive inventories needing stringent radioactivity confinement. We need much research and development (R ampersand D) and design analysis to establish that ITER meets regulatory requirements. We have a further opportunity to do more to prove more of fusion's potential safety and environmental advantages and maximize the amount of ITER technology on the path toward fusion power plants. To fulfill these tasks, we need to overcome three programmatic challenges and three technical challenges. The first programmatic challenge is to fund a comprehensive safety and environmental ITER R ampersand D plan. Second is to strengthen safety and environment work and personnel in the international team. Third is to establish an external consultant group to advise the ITER Joint Team on designing ITER to meet safety requirements for siting by any of the Parties. The first of the three key technical challenges is plasma engineering -- burn control, plasma shutdown, disruptions, tritium burn fraction, and steady state operation. The second is the divertor, including tritium inventory, activation hazards, chemical reactions, and coolant disturbances. The third technical challenge is optimization of design requirements considering safety risk, technical risk, and cost. Some design requirements are now too strict; some are too lax. Fuel cycle design requirements are presently too strict, mandating inappropriate T separation from H and D. Heat sink requirements are presently too lax; they should be strengthened to ensure that maximum loss of coolant accident temperatures drop

1996 DOE technical standards program workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

Discussion on technical intelligence of nuclear power industry

International Nuclear Information System (INIS)

Chen Ming

2010-01-01

The very Paper introduces the contemporary challenges faced by the profession of technical intelligence on nuclear power, and expatiates the functions of technical intelligence such as sources of experience feedback, background information and supports for decision-making. Afterwards, the Paper explains characteristics of technical intelligence and its working methods, i.e., quantitative changes to reach qualitative changes, approve-negate-approve and oppositeness unity of comprehensiveness and limitation of technical intelligence. (authors)

Sustainable Digital Environments: What Major Challenges Is Humankind Facing?

Directory of Open Access Journals (Sweden)

Roland W. Scholz

2016-07-01

Full Text Available This paper identifies and discusses the benefits, threats, and vulnerabilities related to the digital revolution. It aims to motivate research and its funding regarding digital threats and vulnerabilities related, in particular, to anticipating unintended, undesirable rebound effects, tipping points, critically fast evolutionary change rates, trade-offs, etc. A brief analysis of the history of the mind and technology reveals slow technological development over tens of thousands of years (including the invention of a place-value digital number system. Then, a small series of groundbreaking ideas (e.g., binary logic, Shannon’s symbolic analysis of relay and switching circuits, architectures of computing enabled the industry-driven invention of programmable computing machines. Ultimately, the mastery of electron and semiconductor physics allowed for economical and seemingly unlimited storage capacity that made digital tools available to all domains of society. Based on the historical analysis, a coupled human-environment systems perspective (that includes a hierarchy assumption ranging from the human cell to the human species enables the identification of several potential challenges to society and science. First, digital nano-engineering promotes genetic modifications (i.e., directed evolution, and synthetic biology enables a new level of the appropriation of nature. The understanding of cell-based biocomputers may call for new forms of logic. These and other challenges require thorough sustainability research in order to anticipate major changes on all levels of human systems. Second, the human individual is exposed to new forms of vulnerability. In particular, the potential epigenetic effects resulting from the excessive use of digital information of historically unknown speed, density, and contents and the loss of (the Western common-law right to privacy resulting from big data (whose ownership is often unknown should become subjects of

Anomalous Coronary Artery From the Opposite Sinus (ACAOS): Technical Challenges During Percutaneous Coronary Intervention.

Science.gov (United States)

Sinha, Santosh Kumar; Razi, Mahmodula; Mahrotra, Anupam; Aggarwal, Puneet; Singh, Anupam; Rekwal, Lokendra; Tripathi, Sunil; Abhishekh, Nishant Kumar; Krishna, Vinay

2018-04-01

Anomalies of the coronary arteries are reported in 1-2% of patients among diagnostic angiogram. Ectopic origin of right coronary artery (RCA) from opposite sinus is one of the most common and they are mainly benign, but at times may be malignant. We report a case of a 69-year-old male who underwent early invasive percutaneous coronary intervention for non-ST-segment elevation myocardial infarction (NSTEMI) where RCA arising from left sinus at the root of left main artery was culprit and various technical challenges were encountered while intervening in form of cannulation to tracking of hardwares. RCA was cannulated with floating wire technique using hockey stick guide catheter and revascularized by deployment of 3.5 × 38 mm Promus Premier Everolimus eluting stent (Boston Scientific, USA). To the best of our knowledge, this is the first ever report of ectopic RCA being revascularized by using hockey stick catheter.

Research Challenges for the Internet of Things: What Role Can OR Play?

Directory of Open Access Journals (Sweden)

Peter J. Ryan

2017-03-01

Full Text Available The Internet of Things (IoT is an extension of the Internet in which large numbers of “things”, including sensors, actuators and processors, in addition to human users, are networked and able to provide high resolution data on their environment and exercise a degree of control over it. It is still at an early stage of development, and many problems/research challenges must be solved before it is widely adopted. Many of these are technical, including interoperability and scalability, as billions of heterogeneous devices will be connected, but deciding on how to invest in the IoT is a challenge for business, and there are also major social, legal and ethical challenges, including security and privacy of data collection, which must be resolved. As the future IoT will be a multi-national, multi-industry, multi-technology infrastructure, the paper reviews the global standardization efforts that are underway to facilitate its worldwide creation and adoption. The main purpose of the paper is to give a broad survey, based on published literature, of the methods of Operations Research (OR, both the mathematical tools and techniques of “hard” OR, and the various approaches of Systems Thinking, including “soft” OR, which may assist in dealing with these problems. A subset of these is described in greater depth to better convey what might be involved in applying OR and Systems Thinking to the IoT. It is suggested that OR has a role to play in balancing the technical and non-technical research challenges which confront the IoT.

Identification of hazelnut major allergens in sensitive patients with positive double-blind, placebo-controlled food challenge results

DEFF Research Database (Denmark)

Pastorello, Elide A; Vieths, Stefan; Pravettoni, Valerio

2002-01-01

The hazelnut major allergens identified to date are an 18-kd protein homologous to Bet v 1 and a 14-kd allergen homologous to Bet v 2. No studies have reported hazelnut allergens recognized in patients with positive double-blind, placebo-controlled food challenge (DBPCFC) results or in patients...

ATLAS Data Challenge 1

CERN Document Server

Poulard, G

2003-01-01

In 2002 the ATLAS experiment started a series of Data Challenges (DC) of which the goals are the validation of the Computing Model, of the complete software suite, of the data model, and to ensure the correctness of the technical choices to be made. A major feature of the first Data Challenge (DC1) was the preparation and the deployment of the software required for the production of large event samples for the High Level Trigger (HLT) and physics communities, and the production of those samples as a world-wide distributed activity. The first phase of DC1 was run during summer 2002, and involved 39 institutes in 18 countries. More than 10 million physics events and 30 million single particle events were fully simulated. Over a period of about 40 calendar days 71000 CPU-days were used producing 30 Tbytes of data in about 35000 partitions. In the second phase the next processing step was performed with the participation of 56 institutes in 21 countries (~ 4000 processors used in parallel). The basic elements of ...

Novel technical solutions for wireless ECG transmission & analysis in the age of the internet cloud.

Science.gov (United States)

Al-Zaiti, Salah S; Shusterman, Vladimir; Carey, Mary G

2013-01-01

Current guidelines recommend early reperfusion therapy for ST-elevation myocardial infarction (STEMI) within 90 min of first medical encounter. Telecardiology entails the use of advanced communication technologies to transmit the prehospital 12-lead electrocardiogram (ECG) to offsite cardiologists for early triage to the cath lab; which has been shown to dramatically reduce door-to-balloon time and total mortality. However, hospitals often find adopting ECG transmission technologies very challenging. The current review identifies seven major technical challenges of prehospital ECG transmission, including: paramedics inconvenience and transport delay; signal noise and interpretation errors; equipment malfunction and transmission failure; reliability of mobile phone networks; lack of compliance with the standards of digital ECG formats; poor integration with electronic medical records; and costly hardware and software pre-requisite installation. Current and potential solutions to address each of these technical challenges are discussed in details and include: automated ECG transmission protocols; annotatable waveform-based ECGs; optimal routing solutions; and the use of cloud computing systems rather than vendor-specific processing stations. Nevertheless, strategies to monitor transmission effectiveness and patient outcomes are essential to sustain initial gains of implementing ECG transmission technologies. © 2013.

Morbidly obese patient with obstructive sleep apnoea for major spine surgery: An anaesthetic challenge

Directory of Open Access Journals (Sweden)

Shruti Redhu

2016-01-01

Full Text Available Morbidly obese patients with clinical features of obstructive sleep apnoea can present a myriad of challenges to the anaesthesiologists which must be addressed to minimise the perioperative risks. Initiation of continuous positive airway pressure (CPAP therapy early in the pre- and post-operative period along with appropriate anaesthetic planning is of paramount importance in such patients. This case report emphasises the usefulness of CPAP therapy, even for a short duration, to minimise morbidity, improve recovery and hasten early discharge from the hospital after major surgery.

Net-Zero Energy Technical Shelter

DEFF Research Database (Denmark)

Zhang, Chen; Heiselberg, Per; Jensen, Rasmus Lund

2014-01-01

Technical shelters are the basic structures for storing electronic and technical equipment, and commonly used for telecommunication base station, windmill, gas station, etc. Due to their high internal heat load density and special operation schedule, they consume more energy than normal residential...... or commercial buildings. On the other hand, it is a big challenge to power the technical shelter in remote area where the grids are either not available or the expansion of grid is expensive. In order to minimize the energy consumption and obtain a reliable and cost-efficient power solution for technical...... shelter, this study will apply the net-zero energy concept into the technical shelter design. The energy conservation can be achieved by proper design of building envelop and optimization of the cooling strategies. Both experiments and numerical simulations are carried out to investigate the indoor...

Technical progress by major task. Semiannual technical progress report, September 29, 1997 - March 29, 1998

International Nuclear Information System (INIS)

1998-01-01

The technical progress achieved during the period 29 September 1997 through 29 March 1998 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described in this report. The report is organized by program task structure: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; RTG fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair

Exploration in the Deep water Niger Delta: Technical to Business Perspectives

International Nuclear Information System (INIS)

Feeley, M.H.

2002-01-01

Prolific source rocks, high quality deep water reservoirs and a high technical success rate in finding hydrocarbons make the Nigeria deep water one of the top exploration opportunities in the world. Several major discoveries have resulted from exploration on blocks awarded in 1993. Enthusiastic participation by industry in the 2000 Tender Round clearly indicates the continuing appeal of deep water exploration in Nigeria.Commercially, challenges still exist in the Nigerian deep water. Industry has spent more than $2 Billion USD on exploration and appraisal, yet only a handful of developments are moving forward to development. First oil from the deep water is not expected until 2004, 11 years after acreage award and 8 years after discovery. Tougher economic terms, OPEC quota constraints, an abundance of deep water gas, lengthy approval processes and high up-front bonus and exploration costs challenge the economic returns on deep water gas, lengthy approval processes and high up-front bonus and exploration costs challenge the economic returns on deep water investments. Will deep water exploration, development and production deliver the financial returns industry expected when it signed up for the blocks 10 years ago? What are the indications for the 2000 Tender Round blocks?A good explorer learns form experience. What can be learned technically and commercially by looking back over the results of the last 10 years of exploration in Nigeria's deep water? A perspective is provided on the successes, the failures and the challenges to be overcome in realizing the commercial potential of the basin

Plasma technology: a technical economical and political challenge

International Nuclear Information System (INIS)

Abreu, V.A. de; Vicente, L.C.; Bender, O.W.; Sanches Junior, O.

1987-01-01

To survey the State of the Art and Technic in Material, Process and Products by Plasma, it was needed to assemble economic, political and managerial variables that will affect the absortion and implantation of this technology in Brazil. Through a survey in industries, universities, research centers, energy agencies and financial and forster institutions it was possible to build a frame that gave us conditions to forecasting and suggest some mesures to Plasma sector. (author) [pt

Technical and governance considerations for advanced metering infrastructure/smart meters: Technology, security, uncertainty, costs, benefits, and risks

International Nuclear Information System (INIS)

McHenry, Mark P.

2013-01-01

The fundamental role of policymakers when considering Advanced Metering Infrastructure (AMI), or ‘smart meters for energy and water infrastructure is to investigate a broad range of complex interrelated issues. These include alternative technical and non-technical options and deployment needs, the cost and benefits of the infrastructure (risks and mitigation measures), and the impact of a number of stakeholders: consumers, distributors, retailers, competitive market operators, competing technology companies, etc. The scale and number of potential variables in the AMI space is an almost unprecedented challenge to policymakers, with the anticipation of new ancillary products and services, associated market contestability, related regulatory and policy amendments, and the adequacy of consumer protection, education, and safety considerations requiring utmost due-diligence. Embarking on AMI investment entails significant technical, implementation, and strategic risk for governments and administering bodies, and an active effort is required to ensure AMI governance and planning maximises the potential benefits, and minimise uncertainties, costs, and risks to stakeholders. This work seeks to clarify AMI fundamentals and discusses the technical and related governance considerations from a dispassionate perspective, yet acknowledges many stakeholders tend to dichotomise debate, and obfuscate both advantages and benefits, and the converse. - Highlights: • AMI presents an almost unprecedented technical and governance policy challenge. • AMI enables vertical integration of electricity, gas, water, IT, and telco entities • AMI investments involve major technical, implementation, and strategic decisions. • Adequacy of consumer education, safety, privacy, and protection is paramount. • Policy must maximise AMI benefits and minimise uncertainties, costs, and risks

Technical Challenges Hindering Development of Robust Wireless ...

African Journals Online (AJOL)

PROF. OLIVER OSUAGWA

2015-12-01

Dec 1, 2015 ... challenges remain to be resolved, in designing robust wireless networks that can deliver the performance ... demonstrated the first radio transmission from the Isle of ... distances with better quality, less power, and smaller ...

ATLAS Data Challenges - A Collaborative Worldwide Activity

CERN Multimedia

Poulard, G

The goals of the ATLAS Data Challenges (DC) are the validation of the Computing Model, of the complete software suite, of the data model, and to ensure the correctness of the technical choices to be made. It is understood that these Data Challenges should be of increasing complexity and that their results will be used as input for a Computing TDR and for preparing an MoU in due time. A major feature of the current computing activities (DC1) in ATLAS is the preparation and deployment of the software required for the production of large event samples for the High Level Trigger (HLT) and physics communities, and the actual production of those samples. It should be noted that it is not an option to "run everything at CERN" even if we wanted to; the resources are not available at CERN to carry out the production on a reasonable time-scale. We have therefore had to face the great challenge of organising and then carrying out this large-scale production at a significant number of sites around the world. However, th...

How to be an Effective Technical Writer?

OpenAIRE

M Solaiman Ali; Dheya Al-Othmany

2012-01-01

Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations). Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical w...

Challenges for Blog Analysis and Possible Solutions

Science.gov (United States)

Nguyen-Ngoc, Anh Vu; Law, Effie Lai-Chong

Blogs are increasingly used as an educational tool because of their ease of use for web-based publishing, enabling users to share their thoughts that invite intellectual and social discourses. Blogs are becoming a significant component of many web-based learning environments. However, there are 2 major challenges in applying blogs in web-based learning: (i) browsing/searching blog archives are technically not well supported in a learning environment in which several blogs are used by both facilitators and students; (ii) there is lack of a theoretically sound and usable blog analysis scheme to analyse blog content in order to support the evaluation of collaborative learning activities in web-based courses. In this paper, we describe some possible solutions for these challenges based on our research on web-based collaborative learning settings. Our experience of applying blogs in a web-based cross-cultural collaborative learning course is also reported.

Challenges of executing heavy oil projects in today's market

International Nuclear Information System (INIS)

Brunka, G.

2001-01-01

Alberta's industrial project scene from 1981 to 2000 was presented in this power point presentation with particular focus on proposed bitumen recovery projects and heavy oil project challenges. A graph depicting GTG world orders by region (Americas, Asia and Europe) showed that U.S. market continues to drive global growth. Major industrial projects in Alberta were highlighted and employment requirements by sector were outlined. In addition, mitigation measures that are needed to successfully deal with the unique challenges of today's market were described. It was noted that in recent years lower capital expenditure by the industry in general has resulted in corporate downsizing or mergers which in turn have resulted in lower technical and operational knowledge. Some of the current challenges facing the industry are new demands for water treatment expertise and an aging workforce. It was concluded that effective mitigation will require a disciplined approach within a flexible framework.1 tab., 7 figs

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

Science.gov (United States)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

The Colombian nuclear scenario: Challenges and opportunities

Science.gov (United States)

Martinez, Isabel

2016-07-01

In Colombia, the absence of nuclear-oriented policies based on technical knowledge, the closing of the Nuclear Affairs Institute (1956-1998), the association of the word "nuclear" with weapons, plus the country's last six decades of internal conflict and narcotraffic have discourage the technical, social and environmental nuclear advance. However, there are technical, social and economic national challenges that could be faced by the present nuclear technical capacities.

Additive Manufacturing of Silicon Carbide-Based Ceramic Matrix Composites: Technical Challenges and Opportunities

Science.gov (United States)

Singh, Mrityunjay; Halbig, Michael C.; Grady, Joseph E.

2016-01-01

Advanced SiC-based ceramic matrix composites offer significant contributions toward reducing fuel burn and emissions by enabling high overall pressure ratio (OPR) of gas turbine engines and reducing or eliminating cooling air in the hot-section components, such as shrouds, combustor liners, vanes, and blades. Additive manufacturing (AM), which allows high value, custom designed parts layer by layer, has been demonstrated for metals and polymer matrix composites. However, there has been limited activity on additive manufacturing of ceramic matrix composites (CMCs). In this presentation, laminated object manufacturing (LOM), binder jet process, and 3-D printing approaches for developing ceramic composite materials are presented. For the laminated object manufacturing (LOM), fiber prepreg laminates were cut into shape with a laser and stacked to form the desired part followed by high temperature heat treatments. For the binder jet, processing optimization was pursued through silicon carbide powder blending, infiltration with and without SiC nano powder loading, and integration of fibers into the powder bed. Scanning electron microscopy was conducted along with XRD, TGA, and mechanical testing. Various technical challenges and opportunities for additive manufacturing of ceramics and CMCs will be presented.

Fundamental and Technical Challenges for a Compatible Design Scheme of Oxyfuel Combustion Technology

Directory of Open Access Journals (Sweden)

Chuguang Zheng

2015-03-01

Full Text Available Oxyfuel combustion with carbon capture and sequestration (CCS is a carbon-reduction technology for use in large-scale coal-fired power plants. Significant progress has been achieved in the research and development of this technology during its scaling up from 0.4 MWth to 3 MWth and 35 MWth by the combined efforts of universities and industries in China. A prefeasibility study on a 200 MWe large-scale demonstration has progressed well, and is ready for implementation. The overall research development and demonstration (RD&D roadmap for oxyfuel combustion in China has become a critical component of the global RD&D roadmap for oxyfuel combustion. An air combustion/oxyfuel combustion compatible design philosophy was developed during the RD&D process. In this paper, we briefly address fundamental research and technology innovation efforts regarding several technical challenges, including combustion stability, heat transfer, system operation, mineral impurities, and corrosion. To further reduce the cost of carbon capture, in addition to the large-scale deployment of oxyfuel technology, increasing interest is anticipated in the novel and next-generation oxyfuel combustion technologies that are briefly introduced here, including a new oxygen-production concept and flameless oxyfuel combustion.

Negotiating cultural encounters narrating intercultural engineering and technical communication

CERN Document Server

Yu, Han

2013-01-01

Discusses the challenges of intercultural communication in engineering, technical, and related professional fields Given today's globalized technical and engineering environment, intercultural communication is an essential topic for engineers, other technical professionals, and technical communicators to learn. Engineering programs, in particular, need to think about how to address the ABET requirement for students to develop global competence and communication skills. This book will help readers learn what intercultural communication is like in the workplace-which is an import

Integrating Technical Communication in the Mechanical Engineering Curriculum

Science.gov (United States)

Norberg, Seth; Ashcraft, Timothy; van Poppel, Bret

2017-11-01

Technical communication is essential to engineering practice, but these skills can be challenging to teach and assess in the classroom. Instructors in the Mechanical Engineering (ME) program at the United States Military Academy are developing new learning exercises to prepare students for success in their capstone design course and beyond. In this paper we highlight the recent successes and lessons learned from two courses: junior-level Thermal-Fluid Systems and the senior-level ME Seminar. Both courses support the newly implemented West Point Writing Program (WPWP), an institutional, writing-across-the-curriculum program. The junior course incorporates four hands-on experiments, which provide an abundance of data for students to analyze, assess, and present. In the senior course the majority of the content that students present is from their ongoing capstone design projects. Between the two courses, students craft essays, lab reports, short summaries, posters, quad charts, and technical presentations. Both courses include peer evaluation, revision exercises, and timed (on demand) writing assignments. The junior course includes assignments co-authored by a group as well as an individual report. An overview of both courses' assignments with course-end feedback from the students and the faculty is provided. Strengths and weaknesses are identified and recommendations for instructors seeking to implement similar technical communications assignments in their own courses are presented.

Challenges in fingertip replantation.

Science.gov (United States)

Kim, Jin-Soo; Yang, Jae-Won; Lee, Dong-Chul; Ki, Sae-Hwi; Roh, Si-Young

2013-11-01

Fingertip amputation is a challenging injury to manage. Among various reconstructive procedures, replantation results in superior outcome, but is seldom considered in many institutions. From the identification of vessel ends to reanastomosis of the submillimeter vessels, fingertip's highly specialized anatomy requires technical excellence. By addressing these anatomic challenges, fingertip replantation can be a routine reconstructive option for microvascular surgeons.

Challenges in Fingertip Replantation

OpenAIRE

Kim, Jin-Soo; Yang, Jae-Won; Lee, Dong-Chul; Ki, Sae-Hwi; Roh, Si-Young

2013-01-01

Fingertip amputation is a challenging injury to manage. Among various reconstructive procedures, replantation results in superior outcome, but is seldom considered in many institutions. From the identification of vessel ends to reanastomosis of the submillimeter vessels, fingertip's highly specialized anatomy requires technical excellence. By addressing these anatomic challenges, fingertip replantation can be a routine reconstructive option for microvascular surgeons.

Independent technical review, handbook

International Nuclear Information System (INIS)

1994-02-01

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project

Independent technical review, handbook

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

Major health service transformation and the public voice: conflict, challenge or complicity?

Science.gov (United States)

Martin, Graham P; Carter, Pam; Dent, Mike

2018-01-01

Objectives Calls for major reconfigurations of health services have been accompanied by recommendations that wide ranging stakeholders be involved. In particular, patients and the wider public are seen as critical contributors as both funders and beneficiaries of public health care. But public involvement is fraught with challenges, and little research has focused on involvement in the health service transformation initiatives. This paper examines the design and function of public involvement in reconfiguration of health services within the English NHS. Methods Qualitative data including interviews, observation and documents were collected in two health service 'transformation' programmes; interviews include involved public and professional participants. Data were analysed using parallel deductive and inductive approaches. Results Public involvement in the programmes was extensive but its terms of reference, and the individuals involved, were restricted by policy pressures and programme objectives. The degree to which participants descriptively or substantively represented the wider public was limited; participants sought to 'speak for' this public but their views on what was 'acceptable' and likely to influence decision-making led them to constrain their contributions. Conclusions Public involvement in two major service reconfiguration programmes in England was seen as important and functional, and could not be characterized as tokenistic. Yet involvement in these programmes fell short of normative ideals, and could inadvertently reduce, rather than enlarge, public influence on health service reconfiguration decisions.

Accomplishments and challenges of surgical simulation.

Science.gov (United States)

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

Large Water Cherenkov Detectors - Technical Issues -

CERN Document Server

Aihara, H

2010-01-01

We address technical issues and challenges to construct a one-megaton scale water Cherenkov detector for neutrino detection. Studies presented here are mostly based on preliminary work for Hyper Kamiokande project.

Liability and automation : issues and challenges for socio-technical systems

NARCIS (Netherlands)

Contissa, G.; Laukyte, M.; Sartor, G.; Schebesta, H.; Masutti, A.; Lanzi, P.; Marti, P.; Tomasello, P.

2013-01-01

Who is responsible for accidents in highly automated systems? How do we apportion liability among the various participants in complex socio-technical organisations? How can different liability regulations at different levels (supranational, national, local) be harmonized? How do we provide for

Methods for communicating technical information as public information

International Nuclear Information System (INIS)

Zara, S.A.

1987-01-01

Many challenges face the nuclear industry, especially in the waste management area. One of the biggest challenges is effective communication with the general public. Technical complexity, combined with the public's lack of knowledge and negative emotional response, complicate clear communication of radioactive waste management issues. The purpose of this session is to present and discuss methods for overcoming these obstacles and effectively transmitting technical information as public information. The methods presented encompass audio, visual, and print approaches to message transmission. To support these methods, the author also discusses techniques, based on current research, for improving the communication process

Geo synthetics. a remarkable discipline with great achievements in the past and exciting challenges for a bright future; Geosinteticos: una importante disciplina con grandes logros en el pasado y emocionantes retos para un brillante futuro

Energy Technology Data Exchange (ETDEWEB)

Giroud, J. P.

2014-02-01

This paper presents achievements of the geo synthetics discipline and challenges facing the discipline. The paper shows that one of the main achievements of geo synthetics discipline and challenges facing the discipline. The paper shows that one of the main achievements of geo synthetics is that they have pervaded most branches of geotechnical engineering to the point where it is almost impossible to practice geotechnical engineering without geo synthetics. Then, the paper addresses the challenges facing the geo synthetics discipline. Two major types of challenges are identified: education challenges and technical challenges. Regarding technical challenges, it is recommended that researchers focus on behaviors that are not traditionally considered in geotechnical engineering in order to use geo synthetics to their full potential. Note: this is a significantly expanded version of the keynote paper presented at the 2008 GeoAmericas Conferences. (Author)

Hepatic Iron Quantification on 3 Tesla (3 T Magnetic Resonance (MR: Technical Challenges and Solutions

Directory of Open Access Journals (Sweden)

Muhammad Anwar

2013-01-01

Full Text Available MR has become a reliable and noninvasive method of hepatic iron quantification. Currently, most of the hepatic iron quantification is performed on 1.5 T MR, and the biopsy measurements have been paired with R2 and R2* values for 1.5 T MR. As the use of 3 T MR scanners is steadily increasing in clinical practice, it has become important to evaluate the practicality of calculating iron burden at 3 T MR. Hepatic iron quantification on 3 T MR requires a better understanding of the process and more stringent technical considerations. The purpose of this work is to focus on the technical challenges in establishing a relationship between T2* values at 1.5 T MR and 3 T MR for hepatic iron concentration (HIC and to develop an appropriately optimized MR protocol for the evaluation of T2* values in the liver at 3 T magnetic field strength. We studied 22 sickle cell patients using multiecho fast gradient-echo sequence (MFGRE 3 T MR and compared the results with serum ferritin and liver biopsy results. Our study showed that the quantification of hepatic iron on 3 T MRI in sickle cell disease patients correlates well with clinical blood test results and biopsy results. 3 T MR liver iron quantification based on MFGRE can be used for hepatic iron quantification in transfused patients.

A major safety overhaul

CERN Multimedia

2003-01-01

A redefined policy, a revamped safety course, an environmental project... the TIS (Technical Inspection and Safety) Division has begun a major safety overhaul. Its new head, Wolfgang Weingarten, explains to the Bulletin why and how this is happening.

Challenges of designing fusion reactors for remote maintainability

International Nuclear Information System (INIS)

Masson, L.S.

1981-01-01

One of the major problems faced by the fusion community is the development of the high level of reliability required to assure that fusion will be a viable commercial power source. Much of the responsibility for solving this problem falls directly on the designer in developing concepts that have a high level of maintainability for the next generation engineering oriented reactors; and long range, in developing full maintainability for the more complicated commercial concepts with their required high level of on-line time. The near-term challenge will include development of unique design concepts to perform inspection, maintenance, replacement, and testing under the stringent conditions imposed by the next generation engineering oriented machines. The long range challenge will focus on basic design concepts that will enable the full maintainability required by commercial fusion. In addition to the purely technical challenges, the fusion community is also faced with the problem of developing programmatic means to assure that reactor maintenance issues are given proper and timely emphasis as the nuclear phase of fusion is approached

The soil education technical commission of the Brazilian Soil Science Society: achievements and challenges

Science.gov (United States)

Muggler, Cristine Carole; Aparecida de Mello, Nilvania

2013-04-01

The Soil Education and public awareness technical commission of the Brazilian Soil Science Society was created in 1987 as Soil Science teaching commission at that time. In the 90's of the last century the commission was very active and realized three national symposia in the years 1994 to 1996: in Viçosa, Minas Gerais; Santa Maria, Rio Grande do Sul and Pato Branco, Paraná. The following symposium scheduled to happen in Brasilia, 1997 could not be realized and was followed by a weakening and reduction of the involved group. Those three symposia were focused on the aspects of soil science taught at the university educational level, mainly in agrarian sciences. The concern about what was going on at basic education and perception by society was not much present. The commission was revitalized in 2005 and in 2007 realized its first meeting at the Brazilian Congress of Soil Science in Gramado, Rio Grande do Sul. At that meeting it was already an urge to assume the approach of soil education instead of soil science teaching, within a major concern how society consider soils. It was accepted and adequate under the structural reorganization undergone by the national society following the IUSS main lines. The commission was renamed and got two new mates at the newly created Division IV, Soils, Environment and Society, of the Brazilian Soil Science Society: Soils and Food Safety and History, Epistemology and Sociology of Soil Science. The national symposia were relaunched to happen biannually. An inventory of the soil education experiences around the country started and the geographic distribution of the future symposia intended to rescue and bring together experiences in different parts of the country that would not be known by other means. Three symposia were already realized: Piracicaba, Sao Paulo, 2008 (southeast); Curitiba, Paraná, 2010 (south) and Sobral, Ceará, 2012 (northeast). The next is planned to happen in Recife, Pernambuco in April 2014. The scope of the

Liability and automation : issues and challenges for socio-technical systems

NARCIS (Netherlands)

Contissa, Giuseppe; Laukyte, Migle; Sartor, Giovanni; Schebesta, H.; Masutti, Anna; Lanzi, Paola; Marti, Patrizia; Paola, Tomasello

2013-01-01

Who is responsible for accidents in highly automated systems? How do we apportion liability among the various participants in complex socio-technical organisations? How can different liability regulations at different levels (supranational, national, local) be harmonized? How do we provide for

Urology technical and non-technical skills development: the emerging role of simulation.

Science.gov (United States)

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

Managing Challenges in a Multi Contractor Project

Science.gov (United States)

King, Ron

2011-01-01

The presentation provides a project description, describes the integrated product team, and review project challenges. The challenges include programmatic, technical, basic drop tests, heavy drop tests, C-17 envelope expansion, and Ares I-X.

(ICT) to Technical Services in Libraries

African Journals Online (AJOL)

The term technical services is used in this paper to refer to the major operations that are common to all Technical Services Divisions in libraries – namely, cataloguing, classification, indexing and abstracting. These activities have many repetitive components which used to be done manually. But today the new technology ...

Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

International Nuclear Information System (INIS)

1976-01-01

Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

Technical Challenges in the Application and Licensing of Digital Instrumentation and Control Systems in Nuclear Power Plants

International Nuclear Information System (INIS)

2015-01-01

With the modernization of existing analogue instrumentation and control (I&C) systems in nuclear power plants through digital I&C technology, and the implementation of digital I&C systems in new plants, the industry is faced with significant challenges. These challenges appear in the form of difficulties in managing the necessarily incremental transition, highly integrated (and interdependent) architectures, the flexible configurability enabled by digital technology, and uncertainty and inconsistency in licensing digital I&C systems and equipment in the different Member States. This publication discusses 17 major issues that utilities, developers, suppliers and regulatory stakeholders need to consider, so that the industry can capture and benefit from shared experience, recent technological developments, and emerging best practices

The technical potential for proliferation in Northeast Asian states

International Nuclear Information System (INIS)

Joeck, N.; Kramer, R.

1995-01-01

This is a review of the technical capabilities of the states in Northeast Asia - principally Japan, South Korea, and North Korea - to develop nuclear weapons. At the outset, however, it should be emphasised that nuclear proliferation is primarily a political and security problem, rather than a technical challenge. The technical challenge is substantial, but if one looks at states with the technical capacity to develop nuclear weapons, it might be surprising to find that most of them have chosen not to do so. Even with access to fissile material and the technical and scientific infrastructure necessary to produce nuclear weapons, such states as Canada, Switzerland, Norway, Germany, Argentina, Brazil, Japan and many others, have not done so. All three non-nuclear weapon states in Northeast Asia have the technical capability to develop nuclear weapons. Japan and South Korea have intrusive safeguards and inspection arrangements on their nuclear programs, which allow their neighbours and the rest of the world to verify that they have not changed that status, and that they are living up to their NPT commitments. Despite its original commitment to the NPT, North Korea has yet to establish similar arrangements. It is ironic that the country with the smallest and technically least sophisticated nuclear program is the one creating the greatest concern about nuclear proliferation in the region. This irony illustrates the point made in the introduction, however. Nuclear proliferation is more a function of political decision-making than of technical capability

Using Problem Based Learning and Game Design to motivate Non-technical Students to engage in Technical Learning

DEFF Research Database (Denmark)

Reng, Lars; Schoenau-Fog, Henrik

2010-01-01

technology, a broader segment of students are consequently enrolled. One of the challenges of these new educations is to motivate the artistic minded students in learning the technical aspects of the curriculum, as they need these qualifications to work in the industry. At Aalborg University’s department...... have engaged and motivated artistic students to learn technical topics on their own....... of Medialogy, we employ problem based learning and game design to engage these students in learning the technical elements. This paper will describe our approach and exemplify the method by introducing various examples of student projects, where the interest in game design combined with problem based learning...

Overcoming Safeguards Challenges

International Nuclear Information System (INIS)

Henriques, Sasha

2011-01-01

The focus of the 2010 IAEA International Safeguards Symposium was how best, from a technical perspective, to prepare for future verification challenges during this time of change. By bringing together the leading experts in the field from across the world, this symposium provided an opportunity for stakeholders to explore possible solutions in support of the IAEA's nuclear verification mission, and to identify areas where the different stakeholders in the safeguards business can help address these challenges

Technical trends of large-size photomasks for flat panel displays

Science.gov (United States)

Yoshida, Koichiro

2017-06-01

Currently, flat panel displays (FPDs) are one of the main parts for information technology devices and sets. From 1990's to 2000's, liquid crystal displays (LCDs) and plasma displays had been mainstream FPDs. In the middle of 2000's, demand of plasma displays declined and organic light emitting diodes (OLEDs) newly came into FPD market. And today, major technology of FPDs are LCDs and OLEDs. Especially for mobile devices, the penetration of OLEDs is remarkable. In FPDs panel production, photolithography is the key technology as same as LSI. Photomasks for FPDs are used not only as original master of circuit pattern, but also as a tool to form other functional structures of FPDs. Photomasks for FPDs are called as "Large Size Photomasks(LSPMs)", since the remarkable feature is " Size" which reaches over 1- meter square and over 100kg. In this report, we discuss three LSPMs technical topics with FPDs technical transition and trend. The first topics is upsizing of LSPMs, the second is the challenge for higher resolution patterning, and the last is "Multi-Tone Mask" for "Half -Tone Exposure".

Health recommender systems: concepts, requirements, technical basics and challenges.

Science.gov (United States)

Wiesner, Martin; Pfeifer, Daniel

2014-03-03

During the last decades huge amounts of data have been collected in clinical databases representing patients' health states (e.g., as laboratory results, treatment plans, medical reports). Hence, digital information available for patient-oriented decision making has increased drastically but is often scattered across different sites. As as solution, personal health record systems (PHRS) are meant to centralize an individual's health data and to allow access for the owner as well as for authorized health professionals. Yet, expert-oriented language, complex interrelations of medical facts and information overload in general pose major obstacles for patients to understand their own record and to draw adequate conclusions. In this context, recommender systems may supply patients with additional laymen-friendly information helping to better comprehend their health status as represented by their record. However, such systems must be adapted to cope with the specific requirements in the health domain in order to deliver highly relevant information for patients. They are referred to as health recommender systems (HRS). In this article we give an introduction to health recommender systems and explain why they are a useful enhancement to PHR solutions. Basic concepts and scenarios are discussed and a first implementation is presented. In addition, we outline an evaluation approach for such a system, which is supported by medical experts. The construction of a test collection for case-related recommendations is described. Finally, challenges and open issues are discussed.

Health Recommender Systems: Concepts, Requirements, Technical Basics and Challenges

Directory of Open Access Journals (Sweden)

Martin Wiesner

2014-03-01

Full Text Available During the last decades huge amounts of data have been collected in clinical databases representing patients’ health states (e.g., as laboratory results, treatment plans, medical reports. Hence, digital information available for patient-oriented decision making has increased drastically but is often scattered across different sites. As as solution, personal health record systems (PHRS are meant to centralize an individual’s health data and to allow access for the owner as well as for authorized health professionals. Yet, expert-oriented language, complex interrelations of medical facts and information overload in general pose major obstacles for patients to understand their own record and to draw adequate conclusions. In this context, recommender systems may supply patients with additional laymen-friendly information helping to better comprehend their health status as represented by their record. However, such systems must be adapted to cope with the specific requirements in the health domain in order to deliver highly relevant information for patients. They are referred to as health recommender systems (HRS. In this article we give an introduction to health recommender systems and explain why they are a useful enhancement to PHR solutions. Basic concepts and scenarios are discussed and a first implementation is presented. In addition, we outline an evaluation approach for such a system, which is supported by medical experts. The construction of a test collection for case-related recommendations is described. Finally, challenges and open issues are discussed.

Middlesex Community College Software Technical Writing Program.

Science.gov (United States)

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

Private industry opportunity and challenge: Participation in the DOE/NWPA transportation program

International Nuclear Information System (INIS)

Barrett, L.H.

1986-01-01

The program within the Office of Civilian Radioactive Waste Management (OCRWM) of the DOE has been structured so as to tap all of our resources and the author briefly describes in this paper how it does so. Then, he describes one of the greatest challenges of obtaining a certificate of compliance from the Nuclear Regulatory Commission (NRC) for innovative cask designs. The program consists of four major elements: Cask system acquisition; institutional planning and coordination; environmental and economic analyses; and operations. The purpose of this paper is to describe system acquisition and its technical aspects

How to be an Effective Technical Writer?

Directory of Open Access Journals (Sweden)

M Solaiman Ali

2012-07-01

Full Text Available Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations. Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical writing for engineers stresses that a successful engineering career requires strong writing skills. Part 2 (How to write the major sections or elements of a report describes the techniques of writing the abstract, introduction, literature review, procedure/methods & materials, results, discussion, conclusion, and recommendations. Part 3 (Special features of technical writing brings into focus some of the special features of technical writing such as tables & graphs in the text, graphics in instructions, team writing, ethics (plagiarism, document sources, three citation styles and IEEE reference style. Part 4 (Technical usage deals with writing abbreviations, initialisms and acronyms, numbers, units of measurement, and equations.Part 5 (Technical style highlights the imperative writing style and other features of technical writing such as the use of active and passive voices, plain vs. complex syntax, avoiding redundant or superfluous expressions, and vague generalities, using words or expressions with visual impact, the past tense to describe experimental work, the present tense to describe hypotheses, principles, theories and truths, and breaking up the text of the report into short sections. Part 6 (Document specifications emphasizes the technical writer’s need to conform to such document specifications as word count, format, font, number of words per line of text imposed. Part 7 (Reader-friendly technical writing suggests choosing the varied writing modes

Conflict between public perceptions and technical processes in site selection

International Nuclear Information System (INIS)

Avant, R.V. Jr.; Jacobi, L.R.

1985-01-01

U.S. Nuclear Regulatory Commission regulations and guidance on site selection are based on sound technical reasoning. Geology, hydrology, flora and fauna, transportation, demographics, and sociopolitical concerns, to name a few, have been factored into the process. Regardless of the technical objectivity of a site selection process, local opposition groups will challenge technical decisions using technical, nontechnical, and emotional arguments. This paper explores the many conflicts between public perceptions, technical requirements designed to protect the general public, and common arguments against site selection. Ways to deal with opposition are also discussed with emphasis placed on developing effective community relations

Technical risk audit method (tram): development and application to the auditing of major hazard sites

International Nuclear Information System (INIS)

Maddison, T.; Kirk, P.; Stansfield, R.

1998-01-01

The Technical Risk Audit Method (TRAM) has been developed by the UK Health and Safety Executive (UK HSE) as a risk-based auditing and inspection tool for application to Major Hazard process plant covered by the Seveso-I/Seveso-II directives. The objective of TRAM is to provide a framework in which plant inspection or audit can be undertaken and results collated. TRAM comprises a paper audit procedure and a software tool which is used to analyse the results. TRAM includes a semi-quantitative risk model, which may be used to rank risks both within and between similar facilities, using qualitative data collected during the inspection. The results of this qualitative analysis may be used to identify where inspector resources would be best deployed. To date, TRAM has been applied to a number of LPG storage and processing facilities in the UK, and the lessons learnt are being used to develop a robust version suitable for use by inspectors. The methodology will be made consistent with the risk model included in IEC 61508 'Functional safety of electrical/electronic/programmable electronic safety-related systems' to permit its application to a wide range of process plant and other hazardous facilities. (authors)

Effective approaches to regulate mobile advertising: moving towards a co-ordinated legal, self-regulatory, and technical response

DEFF Research Database (Denmark)

Cleff, Evelyne Beatrix

2009-01-01

This article aims to contribute to the ongoing discourse about the issue of privacy in the mobile advertising domain. The article discusses the fundamental principles and information practices used in digital environments for protecting individuals' private data. Major challenges are identified t......, such as legislation, self-regulation and technical approaches. It is intended to promote an effective approach to improve consumer privacy in the mobile advertising domain.......This article aims to contribute to the ongoing discourse about the issue of privacy in the mobile advertising domain. The article discusses the fundamental principles and information practices used in digital environments for protecting individuals' private data. Major challenges are identified...... that should be addressed, so that fair information principles can be applied in the context of m-advertising. It also points out the limitations of these principles. Furthermore, the article discusses a range of models that is available for regulating the collection, use and disclosure of personal data...

Factors affecting the technical efficiency of dairy farms in Kosovo

Directory of Open Access Journals (Sweden)

Egzon BAJRAMI

2017-11-01

Full Text Available A possible accession into the World Trade Organization (WTO and an expected membership in the European Union raise significant opportunities and challenges for the agricultural sector in Kosovo. As a result of these changes, the sector will have to improve efficiency and competitiveness. This research is motivated by the need to understand better the forces that drive competitiveness in the Kosovo dairy sector. This study estimates the technical efficiency (TE of 243 dairy farms in Kosovo and relates TE variation to farm size and other primary determinants of TE. A stochastic frontier production function is estimated using a two-stage procedure. Results reveal that concentrate feed intake, land use per cow, and the number of days cows had been kept on pasture have statistically significant impacts on milk productivity per cow. The mean technical efficiency of dairy farms was estimated at 0.72. The major determinants that increase efficiency are breed improvement, intensification of corn production on the farm, improving concentrate feed intake, and using free-range production systems. Given the results from the technical efficiency analysis, it is crucial for the Government of Kosovo to redesign their dairy policy—specifically their grant investment schemes—and target assistance on improving national herd genetics, promoting free range systems and expanding area planted in corn.

Portal Vein Embolization as an Oncosurgical Strategy Prior to Major Hepatic Resection: Anatomic, Surgical and Technical Considerations for Successful Outcomes

Directory of Open Access Journals (Sweden)

Sonia Tewani Orcutt

2016-03-01

Full Text Available Preoperative portal vein embolization (PVE is used to extend the indications for major hepatic resection, and it has become the standard of care for selected patients with hepatic malignancies treated at major hepatobiliary centers. To date, various techniques with different embolic materials have been used with similar results in the degree of liver hypertrophy. Regardless of the specific strategy used, both surgeons and interventional radiologists must be familiar with each other’s techniques to be able to create the optimal plan for each individual patient. Knowledge of the segmental anatomy of the liver is paramount to fully understand the liver segments that need to be embolized and resected. Understanding the portal vein anatomy and the branching variations, along with the techniques used to transect the portal vein during hepatic resection, is important because these variables can affect the PVE procedure and the eventual surgical resection. Comprehension of the advantages and disadvantages of approaches to the portal venous system and the various embolic materials used for PVE is essential to best tailor the procedures for each patient and to avoid complications. Before PVE, meticulous assessment of the portal vein branching anatomy is performed with cross-sectional imaging, and embolization strategies are developed based on the patient’s anatomy. The PVE procedure consists of several technical steps, and knowledge of these technical tips, potential complications and how to avoid the complications in each step is of great importance for safe and successful PVE, and ultimately successful hepatectomy. Because PVE is used as an adjunct to planned hepatic resection, priority must always be placed on safety, without compromising the integrity of the future liver remnant, and close collaboration between interventional radiologists and hepatobiliary surgeons is essential to achieve successful outcomes.

The MedlinePlus public user interface: studies of design challenges and opportunities

Science.gov (United States)

Marill, Jennifer L.; Miller, Naomi; Kitendaugh, Paula

2006-01-01

Question: What are the challenges involved in designing, modifying, and improving a major health information portal that serves over sixty million page views a month? Setting: MedlinePlus, the National Library of Medicine's (NLM's) consumer health Website, is examined. Method: Challenges are presented as six “studies,” which describe selected design issues and how NLM staff resolved them. Main Result: Improving MedlinePlus is an iterative process. Changes in the public user interface are ongoing, reflecting Web design trends, usability testing recommendations, user survey results, new technical requirements, and the need to grow the site in an orderly way. Conclusion: Testing and analysis should accompany Website design modifications. New technologies may enhance a site but also introduce problems. Further modifications to MedlinePlus will be informed by the experiences described here. PMID:16404467

TECHNICAL COORDINATION, SCHEDULE AND INTEGRATION

CERN Multimedia

A. Ball

Introduction Since the lowering of YB0 in February, less spectacular but nonetheless crucial progress has been made along the critical path to CMS completion. The YB0 has been aligned with the beamline to a fraction of a mm, and the HCAL has been fully installed. Cabling scaffolding for YB0 services has been built and one half (-z end) of the ECAL barrel has been installed. The YB0 services installation has begun, with two of the major technical challenges delaying bulk installation, namely PP1 detailed design, manufacture and installation plus Tracker cooling pipe insulation, now apparently solved. Significant difficulties in detailed design, integration and procurement of cable ducts remain. Despite this, the design of the +end is close to complete, and Tracker power cable installation on two sectors of the +end is well advanced. A new master schedule, v36.0, is being prepared to account for the updated actual situation at point 5 and for the revised LHC machine planning. Safety The enormous amount of...

ATR Technical Specification Upgrade Program

International Nuclear Information System (INIS)

McCracken, R.T.; Durney, J.L.; Freund, G.A.

1990-01-01

The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

Image rejects/retakes-radiographic challenges

International Nuclear Information System (INIS)

Waaler, D.; Hofmann, B.

2010-01-01

A general held position among radiological personnel prior to digitalisation was that the problem of image rejects/retakes should more or less vanish. However, rejects/retakes still impose several challenges within radiographic imaging; they occupy unnecessary resources, expose patients to unnecessary ionizing radiation and may also indicate suboptimal quality management. The latter is the main objective of this paper, which is based on a survey of international papers published both for screen/film and digital technology. The digital revolution in imaging seems to have reduced the percentage of image rejects/retakes from 10-15 to 3-5%. The major contribution to the decrease appears to be the dramatic reduction of incorrect exposures. At the same time, rejects/retakes due to lack of operator competence (positioning, etc.) are almost unchanged, or perhaps slightly increased (due to lack of proper technical competence, incorrect organ coding, etc.). However, the causes of rejects/retakes are in many cases defined and reported with reference to radiographers' subjective evaluations. Thus, unless radiographers share common views on image quality and acceptance criteria, objective measurements and assessments of reject/retake rates are challenging tasks. Interestingly, none of the investigated papers employs image quality parameters such as 'too much noise' as categories for rejects/retakes. Surprisingly, no reject/retake analysis seems yet to have been conducted for direct digital radiography departments. An increased percentage of rejects/retakes is related to 'digital skills' of radiographers and therefore points to areas for extended education and training. Furthermore, there is a need to investigate the inter subjectivity of radiographers' perception of, and attitude towards, both technical and clinical image quality criteria. Finally, there may be a need to validate whether reject/retake rate analysis is such an effective quality indicator as has been asserted

Image rejects/retakes--radiographic challenges.

Science.gov (United States)

Waaler, D; Hofmann, B

2010-01-01

A general held position among radiological personnel prior to digitalisation was that the problem of image rejects/retakes should more or less vanish. However, rejects/retakes still impose several challenges within radiographic imaging; they occupy unnecessary resources, expose patients to unnecessary ionizing radiation and may also indicate suboptimal quality management. The latter is the main objective of this paper, which is based on a survey of international papers published both for screen/film and digital technology. The digital revolution in imaging seems to have reduced the percentage of image rejects/retakes from 10-15 to 3-5 %. The major contribution to the decrease appears to be the dramatic reduction of incorrect exposures. At the same time, rejects/retakes due to lack of operator competence (positioning, etc.) are almost unchanged, or perhaps slightly increased (due to lack of proper technical competence, incorrect organ coding, etc.). However, the causes of rejects/retakes are in many cases defined and reported with reference to radiographers' subjective evaluations. Thus, unless radiographers share common views on image quality and acceptance criteria, objective measurements and assessments of reject/retake rates are challenging tasks. Interestingly, none of the investigated papers employs image quality parameters such as 'too much noise' as categories for rejects/retakes. Surprisingly, no reject/retake analysis seems yet to have been conducted for direct digital radiography departments. An increased percentage of rejects/retakes is related to 'digital skills' of radiographers and therefore points to areas for extended education and training. Furthermore, there is a need to investigate the inter-subjectivity of radiographers' perception of, and attitude towards, both technical and clinical image quality criteria. Finally, there may be a need to validate whether reject/retake rate analysis is such an effective quality indicator as has been asserted.

Safety analysis - current and future regulatory challenges

Energy Technology Data Exchange (ETDEWEB)

Jamieson, T., E-mail: Terry.Jamieson@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2015-07-01

'Full text:' The current and future regulatory challenges associated with deterministic safety analysis are reviewed, including: 1. The CNSC's and safety control areas. 2. Traditional safety analysis approach. 3. Experience gained and impact. 4. Current analysis and regulatory approaches. 5. Current status. 6. Complexity and challenges In particular, the technical, regulatory and strategic aspects of these challenges are discussed. (author)

Safety analysis - current and future regulatory challenges

International Nuclear Information System (INIS)

Jamieson, T.

2015-01-01

'Full text:' The current and future regulatory challenges associated with deterministic safety analysis are reviewed, including: 1. The CNSC's and safety control areas. 2. Traditional safety analysis approach. 3. Experience gained and impact. 4. Current analysis and regulatory approaches. 5. Current status. 6. Complexity and challenges In particular, the technical, regulatory and strategic aspects of these challenges are discussed. (author)

Geospatial Big Data Handling Theory and Methods: A Review and Research Challenges

DEFF Research Database (Denmark)

Li, Songnian; Dragicevic, Suzana; Anton, François

2016-01-01

Big data has now become a strong focus of global interest that is increasingly attracting the attention of academia, industry, government and other organizations. Big data can be situated in the disciplinary area of traditional geospatial data handling theory and methods. The increasing volume...... for Photogrammetry and Remote Sensing (ISPRS) Technical Commission II (TC II) revisits the existing geospatial data handling methods and theories to determine if they are still capable of handling emerging geospatial big data. Further, the paper synthesises problems, major issues and challenges with current...... developments as well as recommending what needs to be developed further in the near future....

Polymer Solidification Technology - Technical Issues and Challenges

International Nuclear Information System (INIS)

Jensen, Charles; Kim, Juyoul

2010-01-01

Many factors come into play, most of which are discovered and resolved only during full-scale solidification testing of each of the media commonly used in nuclear power plants. Each waste stream is unique, and must be addressed accordingly. This testing process is so difficult that Diversified's Vinyl Ester Styrene and Advanced Polymer Solidification are the only two approved processes in the United States today. This paper summarizes a few of the key obstacles that must be overcome to achieve a reliable, repeatable process for producing an approved Stable Class B and C waste form. Before other solidification and encapsulation technologies can be considered compliant with the requirements of a Stable waste form, the tests, calculations and reporting discussed above must be conducted for both the waste form and solidification process used to produce the waste form. Diversified's VERI TM and APS TM processes have gained acceptance in the UK. These processes have also been approved and gained acceptance in the U. S. because we have consistently overcome technical hurdles to produce a complaint product. Diversified Technologies processes are protected intellectual property. In specific instances, we have patents pending on key parts of our process technology

Scenario-Based Digital Forensics Challenges in Cloud Computing

Directory of Open Access Journals (Sweden)

Erik Miranda Lopez

2016-10-01

Full Text Available The aim of digital forensics is to extract information to answer the 5Ws (Why, When, Where, What, and Who from the data extracted from the evidence. In order to achieve this, most digital forensic processes assume absolute control of digital evidence. However, in a cloud environment forensic investigation, this is not always possible. Additionally, the unique characteristics of cloud computing create new technical, legal and architectural challenges when conducting a forensic investigation. We propose a hypothetical scenario to uncover and explain the challenges forensic practitioners face during cloud investigations. Additionally, we also provide solutions to address the challenges. Our hypothetical case scenario has shown that, in the long run, better live forensic tools, development of new methods tailored for cloud investigations and new procedures and standards are indeed needed. Furthermore, we have come to the conclusion that forensic investigations biggest challenge is not technical but legal.

Demand response in Germany: Technical potential, benefits and regulatory challenges

OpenAIRE

Stede, Jan

2016-01-01

An increased flexibility of the electricity demand side through demand response (DR) is an opportunity to support the integration of renewable energies. By optimising the use of the generation, transmission and distribution infrastructure, DR reduces the need for costly investments and contributes to system security. There is a significant technical DR potential for load reduction from industrial production processes in Germany, as well as from cross-cutting technologies in industry and the t...

Blanket/first wall challenges and required R&D on the pathway to DEMO

International Nuclear Information System (INIS)

Abdou, Mohamed; Morley, Neil B.; Smolentsev, Sergey; Ying, Alice; Malang, Siegfried; Rowcliffe, Arthur; Ulrickson, Mike

2015-01-01

The breeding blanket with integrated first wall (FW) is the key nuclear component for power extraction, tritium fuel sustainability, and radiation shielding in fusion reactors. The ITER device will address plasma burn physics and plasma support technology, but it does not have a breeding blanket. Current activities to develop “roadmaps” for realizing fusion power recognize the blanket/FW as one of the principal remaining challenges. Therefore, a central element of the current planning activities is focused on the question: what are the research and major facilities required to develop the blanket/FW to a level which enables the design, construction and successful operation of a fusion DEMO? The principal challenges in the development of the blanket/FW are: (1) the Fusion Nuclear Environment – a multiple-field environment (neutrons, heat/particle fluxes, magnetic field, etc.) with high magnitudes and steep gradients and transients; (2) Nuclear Heating in a large volume with sharp gradients – the nuclear heating drives most blanket phenomena, but accurate simulation of this nuclear heating can be done only in a DT-plasma based facility; and (3) Complex Configuration with blanket/first wall/divertor inside the vacuum vessel – the consequence is low fault tolerance and long repair/replacement time. These blanket/FW development challenges result in critical consequences: (a) non-fusion facilities (laboratory experiments) need to be substantial to simulate multiple fields/multiple effects and must be accompanied by extensive modeling; (b) results from non-fusion facilities will be limited and will not fully resolve key technical issues. A DT-plasma based fusion nuclear science facility (FNSF) is required to perform “multiple effects” and “integrated” experiments in the fusion nuclear environment; and (c) the Reliability/Availability/Maintainability/Inspectability (RAMI) of fusion nuclear components is a major challenge and is one of the primary reasons

Blanket/first wall challenges and required R&D on the pathway to DEMO

Energy Technology Data Exchange (ETDEWEB)

Abdou, Mohamed, E-mail: abdou@fusion.ucla.edu; Morley, Neil B.; Smolentsev, Sergey; Ying, Alice; Malang, Siegfried; Rowcliffe, Arthur; Ulrickson, Mike

2015-11-15

The breeding blanket with integrated first wall (FW) is the key nuclear component for power extraction, tritium fuel sustainability, and radiation shielding in fusion reactors. The ITER device will address plasma burn physics and plasma support technology, but it does not have a breeding blanket. Current activities to develop “roadmaps” for realizing fusion power recognize the blanket/FW as one of the principal remaining challenges. Therefore, a central element of the current planning activities is focused on the question: what are the research and major facilities required to develop the blanket/FW to a level which enables the design, construction and successful operation of a fusion DEMO? The principal challenges in the development of the blanket/FW are: (1) the Fusion Nuclear Environment – a multiple-field environment (neutrons, heat/particle fluxes, magnetic field, etc.) with high magnitudes and steep gradients and transients; (2) Nuclear Heating in a large volume with sharp gradients – the nuclear heating drives most blanket phenomena, but accurate simulation of this nuclear heating can be done only in a DT-plasma based facility; and (3) Complex Configuration with blanket/first wall/divertor inside the vacuum vessel – the consequence is low fault tolerance and long repair/replacement time. These blanket/FW development challenges result in critical consequences: (a) non-fusion facilities (laboratory experiments) need to be substantial to simulate multiple fields/multiple effects and must be accompanied by extensive modeling; (b) results from non-fusion facilities will be limited and will not fully resolve key technical issues. A DT-plasma based fusion nuclear science facility (FNSF) is required to perform “multiple effects” and “integrated” experiments in the fusion nuclear environment; and (c) the Reliability/Availability/Maintainability/Inspectability (RAMI) of fusion nuclear components is a major challenge and is one of the primary reasons

Minutes of the IFMIF technical meeting

International Nuclear Information System (INIS)

Nakamura, H.; Takeda, M.; Ida, M.; Maebara, S.; Yutani, T.; Sugimoto, M.

2004-03-01

The IFMIF Technical Meeting was held on December 4-5, 2003 at Shiran-kaikan, Kyoto University. The main objectives are 1) to finalize the Comprehensive Design Report (CDR), 2) to discuss IFMIF cost and organization, 3) to review technical status of major systems, transition phase activities and EVEDA plan. This report presents a brief summary of the results of the meeting. Agenda, participants list and presentation materials are attached as Appendix. (author)

Advanced nuclear plants: Meeting the economic challenge

International Nuclear Information System (INIS)

Redding, J.R.; MacGregor, P.R.

1993-01-01

This article examines the economic challenges to nuclear power meeting the forecasted power demand of the end of the century. The topics of the article include the economic challenge, safety, competition from other energy sources, a US case study, environmental costs, capital costs, reducing operation and maintenance costs, and non-technical features

An innovative longitudinal curriculum to increase emergency medicine residents’ exposure to rarely encountered and technically challenging procedures

Directory of Open Access Journals (Sweden)

Grall KH

2014-07-01

indicated that the residents were able to reach their goal numbers. Conclusion: Based on survey results, the procedure series improved our residents’ perceived understanding of and perceived ability to perform uncommon and more technically challenging procedures. Further, results suggest that the use of a cognitive curriculum model as developed by Manthey and Fitch is adaptable and could be modified to fit the needs of other medical specialties. Keywords: graduate medical education, emergency medical education, procedural competency, high-fidelity simulation

Challenges and solutions in natural gas engine development and productions

Energy Technology Data Exchange (ETDEWEB)

Ahmadi, Mahdi; Izanloo, Hossein [Irankhodro Powertrain Co. (IPCO) (Iran)

2008-07-01

As an alternative fuel, natural gas is generally accepted for internal combustion engines and some developments have been conducted in order to adopt it for the road vehicles and stationary applications. Foresights shows natural gas vehicles will be a part of the future transportation technology regarding to their mid and long-term benefits. Therefore inherent problems of natural gas engine technology should be overcome to produce a competitive engine. In this paper major problems and their possible solutions in developing and producing natural gas engine for passenger cars are detailed and discussed. Challenging materials are sorted and presented in two categorizes: technical and econo-strategical problems. In the technical section major difficulties faced in components or systems of natural gas engine are analysed in different aspects of design, validation, and production. In addition problems arisen from the fuel characteristics which influence the function and durability of engine are argued. Subjects like freezing in gas regulator, cold start fuel injection, gas leakage, impurities within compressed natural gas, variation in fuel composition, thermo-mechanics of cylinder head and block, wear of valve seat inserts, spark plug erosion, back-fire phenomenon, engine oil quality requirement, low power density and mileage are described. In the econo-strategical discussion, challenges like limited gas distribution infrastructure, lack of specific manufacturing standards and codes, and non-dedicated emission standards are explained. In both part of the paper a comprehensive view is extended to clarify the effect, risk and solutions of each problem. Due to the fact that almost all information and analysis presented in this paper are based on the experience of developing a natural gas engine family, and an extensive literature review, discussions and conclusions could be useful as a guide line for future natural gas engine projects. (orig.)

The cleanup of Three Mile Island Unit 2: A technical history, 1979--1990

International Nuclear Information System (INIS)

Holton, W.C.; Negin, C.A.; Owrutsky, S.L.

1990-09-01

The Electric Power Research Institute has sponsored a technical history project to ensure that the logic and consequences of decisions made during the Three Mile Island Unit 2 (TMI-2) cleanup are available for recovery from an accident involving damaged fuel and fission product release. The objectives of the history project are to identify the major questions and challenges facing management; describe the influencing factors and the options available; and present the final decisions and their consequences. This history of decision-making is intended to assist a project manager who must respond to a fuel damage accident, even if the scale is much smaller than TMI-2. The history has focused on decisions related to seven major aspects of the cleanup: cleanup management, postaccident stabilization, personnel protection, data acquisition, radioactive waste management, decontamination, and defueling. A detailed chronology and extensive bibliography accompany the text

Enhanced Recovery After Surgery Protocols in Major Urologic Surgery

Directory of Open Access Journals (Sweden)

Natalija Vukovic

2018-04-01

Full Text Available The purpose of the reviewThe analysis of the components of enhanced recovery after surgery (ERAS protocols in urologic surgery.Recent findingsERAS protocols has been studied for over 20 years in different surgical procedures, mostly in colorectal surgery. The concept of improving patient care and reducing postoperative complications was also applied to major urologic surgery and especially procedure of radical cystectomy. This procedure is technically challenging, due to a major surgical resection and high postoperative complication rate that may reach 65%. Several clinical pathways were introduced to improve perioperative course and reduce the length of hospital stay. These protocols differ from ERAS modalities in other surgeries. The reasons for this are longer operative time, increased risk of perioperative transfusion and infection, and urinary diversion achieved using transposed intestinal segments. Previous studies in this area analyzed the need for mechanical bowel preparation, postoperative nasogastric tube decompression, as well as the duration of urinary drainage. Furthermore, the attention has also been drawn to perioperative fluid optimization, pain management, and bowel function.SummaryNotwithstanding partial resemblance between the pathways in major urologic surgery and other pelvic surgeries, there are still scarce guidelines for ERAS protocols in urology, which is why further studies should assess the importance of preoperative medical optimization, implementation of thoracic epidural anesthesia and analgesia, and perioperative nutritional management.

ICT security curriculum or how to respond to current global challenges

Directory of Open Access Journals (Sweden)

Marian Silviu Poboroniuc

2017-01-01

Full Text Available The paper presents some results obtained through the implementation of the Erasmus LLP “SALEIE” (Strategic Alignment of Electrical and Information Engineering in European Higher Education Institutions. The aim of the project was to bring together experts from European universities to enhance the competitiveness of Electrical and Information Engineering (EIE education within Europe, especially in relation to modern global technical challenges and to provide higher education models in a few EIE fields in accordance with these challenges. One of the outcomes of the project was a new ICT (Information and Computer Technology Security curriculum for bachelor and master levels. The research methodology comprised such stages as: identifying the most important current global challenges, conducting a survey related to existing EIE programs in order to establish the top-level criteria for an EIE curriculum, analyzing the results of the survey, obtaining the industry feedback related to technical and non-technical skills required for the specific field, and proposing a new curriculum for ICT Security programmes to respond to the modern technical challenges and to meet the needs of the industry, students, academics and graduates. As future work we will focus on stakeholder assessment in the EIE field and, based on the resulting feedback, on improving the ICT Security curriculum.

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

Science.gov (United States)

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Psassessment in technical skills across all three scenarios (correlation range 0.52-0.84, Psskills. This study establishes feasibility and

Technical challenges to energy systems' operation and markets

Energy Technology Data Exchange (ETDEWEB)

Soerensen, P.; Meibom, P.; Gehrke, O. [Risoe National Lab. (Denmark); Oestergaard, J. [Technical Univ. of Denmark (Denmark)

2006-11-15

A future energy system that includes a high proportion of renewable energy will be expected to meet the same requirements for security of supply and economic efficiency as the energy systems of today, while delivering better environmental performance, especially with regard to CO{sub 2} emissions. Security of supply refers to the long-term reliability of fuel supply; especially in power systems, it also covers short-term requirements for system stability and adequacy. Economic efficiency is concerned with getting the best from the significant amounts of money, human capital and natural resources involved in an energy system. Integral to economic efficiency in energy systems is the presence of well-functioning markets for energy services. The variability and reduced predictability of a number of renewable energy sources, notably wind power, create specific challenges for future energy systems compared to those of today. Power transmission will also become an issue, as the areas with good potential for wind power and wave energy are often located some distance from the centres of power consumption. This chapter describes the challenges involved, and possible solutions to these, with a focus on power systems. The chapter is divided into two sections reflecting the fact that some challenges relate to managing the power system in its normal operation mode, whereas others are specific to fault conditions. (au)

Linguistic Knowledge Aspects in Academic Reading: Challenges and Deployed Strategies by English-Major Undergraduates at a Jordanian Institution of Higher Education

Science.gov (United States)

Albashtawi, Abeer H.; Jaganathan, Paramaswari; Singh, Manjet

2016-01-01

This study aimed to investigate the linguistic knowledge aspect in academic reading, the challenges and the deployed strategies by English major undergraduates at a Jordanian institution of higher education. The importance of the study is attributed to the importance of the academic reading at university which is closely related to the academic…

Integrated risk - healthy technical conscience

Energy Technology Data Exchange (ETDEWEB)

Freeman, P. [Institute of Nuclear Power Operations, Atlanta, GA (United States)

2015-07-01

The personal obligation leaders and individuals internalize and exercise to ensure plant operation, maintenance, and engineering activities are conducted in a manner consistent with plant design, emergency response strategies, technical requirements and that preserve operating, design and safety margins. Technical errors are increasing, both in number and significance. Causes are common at many utilities. The majority of these engineering human performance weaknesses have not had immediate impact on station reliability and safety (not self-revealing). In some recent projects, the same weaknesses affected a station's viability.

Challenges in Second-Generation Wireless Mesh Networks

Directory of Open Access Journals (Sweden)

Pescapé Antonio

2008-01-01

Full Text Available Wireless mesh networks have the potential to provide ubiquitous high-speed Internet access at low costs. The good news is that initial deployments of WiFi meshes show the feasibility of providing ubiquitous Internet connectivity. However, their performance is far below the necessary and achievable limit. Moreover, users' subscription in the existing meshes is dismal even though the technical challenges to get connectivity are low. This paper provides an overview of the current status of mesh networks' deployment, and highlights the technical, economical, and social challenges that need to be addressed in the next years. As a proof-of-principle study, we discuss the above-mentioned challenges with reference to three real networks: (i MagNets, an operator-driven planned two-tier mesh network; (ii Berlin Freifunk network as a pure community-driven single-tier network; (iii Weimar Freifunk network, also a community-driven but two-tier network.

Activities to Address Challenges in Digital Innovation

OpenAIRE

Lund , Jesper

2014-01-01

Part 3: Structures and Networks; International audience; Based on a literature review, this paper identifies four socio-technical challenges relating to innovation actor’s interactions in digital innovation. Furthermore, the paper explores how these challenges can be addressed. The challenges are investigated in a case study of digital innovation. The study is based on a two year long research and development project where an e-newspaper concept and a demonstrator based on e-paper technology ...

Food irradiation. Technical and legal aspects

International Nuclear Information System (INIS)

Vas, K.

1978-01-01

This document presents a brief technical discussion on a new major technique for food preservation and points out the necessary harmonization of national regulations to give them a broader application field [fr

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

Science.gov (United States)

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Climate Change Challenges for Extension Educators: Technical Capacity and Cultural Attitudes

Science.gov (United States)

Becerra, Terrie A.; Middendorf, Gerad; Campbell, Amber; Tomlinson, Peter

2016-01-01

We surveyed Extension educators in the southern Great Plains about their attitudes and beliefs regarding climate change, their interactions with constituents surrounding climate change, and challenges they face in engaging constituents on the topic of climate change. Production-oriented and sociocultural challenges in meeting constituents'…

The Potential of the Technical University of Denmark in the Light of Sustainable Livable Cities

DEFF Research Database (Denmark)

Jensen, Lotte Bjerregaard; Nielsen, Per Sieverts; Nielsen, Susanne Balslev

2014-01-01

The Technical University of Denmark (DTU) has a long tradition for research and education in urban planning and sustainable urban development. An increasing societal focus on sustainability and urbanization in society supports this continuous focus on sustainable urban planning in technical...... educations. The focus on sustainable urban development includes understanding the role of civil engineering, water engineering, sustainable mobility and energy, and communities in developing future desirable solutions. However, beyond the challenges faced in each of the specific technical fields...... which by themselves have an impact on urban development, including water in cities, climate adaptation, mobility planning, building, energy, and community designs. A number of challenges in developing an integrated approach in the technical education are discussed in the paper. The increasing focus...

Independent Technical (open-quotes Red Teamclose quotes) Reviews

International Nuclear Information System (INIS)

Thullen, P.; Bennett, D.R.; Kosiewicz, S.T.; Weaver, D.L.

1995-01-01

Offices under the Assistant Secretary for Environmental Restoration and Waste Management (EM) in the Department of Energy (DOE) and some National Laboratories are using Independent Technical or open-quotes Red Teamclose quotes Reviews to understand and improve the performance of major projects, major system acquisitions, programs and organizations. A core group formed in 1991 by Los Alamos National Laboratory and Sandia National Laboratories, has organized teams of commercial and private consultants to perform over fifteen Independent Technical Reviews (ITRs) throughout the DOE Complex. This paper discusses: review initiation, team formation, methodology, site response, and observations gathered over the past three years

Terabit Wireless Communication Challenges

Science.gov (United States)

Hwu, Shian U.

2012-01-01

This presentation briefly discusses a research effort on Terabit Wireless communication systems for possible space applications. Recently, terahertz (THz) technology (300-3000 GHz frequency) has attracted a great deal of interest from academia and industry. This is due to a number of interesting features of THz waves, including the nearly unlimited bandwidths available, and the non-ionizing radiation nature which does not damage human tissues and DNA with minimum health threat. Also, as millimeter-wave communication systems mature, the focus of research is, naturally, moving to the THz range. Many scientists regard THz as the last great frontier of the electromagnetic spectrum, but finding new applications outside the traditional niches of radio astronomy, Earth and planetary remote sensing, and molecular spectroscopy particularly in biomedical imaging and wireless communications has been relatively slow. Radiologists find this area of study so attractive because t-rays are non-ionizing, which suggests no harm is done to tissue or DNA. They also offer the possibility of performing spectroscopic measurements over a very wide frequency range, and can even capture signatures from liquids and solids. According to Shannon theory, the broad bandwidth of the THz frequency bands can be used for terabit-per-second (Tb/s) wireless communication systems. This enables several new applications, such as cell phones with 360 degrees autostereoscopic displays, optic-fiber replacement, and wireless Tb/s file transferring. Although THz technology could satisfy the demand for an extremely high data rate, a number of technical challenges need to be overcome before its development. This presentation provides an overview the state-of-the- art in THz wireless communication and the technical challenges for an emerging application in Terabit wireless systems. The main issue for THz wave propagation is the high atmospheric attenuation, which is dominated by water vapor absorption in the THz

Challenges for Insertion of Structural Nanomaterials in Aerospace Applications

Science.gov (United States)

Sochi, Emilie J.

2012-01-01

In the two decades since Iijima's report on carbon nanotubes (CNT), there has been great interest in realizing the benefits of mechanical properties observed at the nanoscale in large-scale structures. The weight savings possible due to dramatic improvements in mechanical properties relative to state-of-the-art material systems can be game changing for applications like aerospace vehicles. While there has been significant progress in commercial production of CNTs, major aerospace applications that take advantage of properties offered by this material have yet to be realized. This paper provides a perspective on the technical challenges and barriers for insertion of CNTs as an emerging material technology in aerospace applications and proposes approaches that may reduce the typical timeframe for technology maturation and insertion into aerospace structures.

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide Vitè

2002-01-01

Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

Centennial Challenges Program

Science.gov (United States)

Ortega, Sam; Eberly, Eric

2015-01-01

NASA's Centennial Challenges Program was initiated in 2005 to directly engage the public in the process of advanced technology development. The program offers incentive prizes to generate revolutionary solutions to problems of interest to NASA and the nation. The program seeks innovations from diverse and nontraditional sources. Competitors are not supported by government funding and awards are only made to successful teams when the challenges are met. In keeping with the spirit of the Wright Brothers and other American innovators, the Centennial Challenge prizes are offered to independent inventors including small businesses, student groups, and individuals. These independent inventors are sought to generate innovative solutions for technical problems of interest to NASA and the nation and to provide them with the opportunity to stimulate or create new business ventures.

Cable Television: Technical Considerations in Franchising Major Market Systems.

Science.gov (United States)

Pilnick, Carl

The 1972 Federal Communications Commission's (FCC) regulations on cable television were intended to assist the penetration of cable television into the large metropolitan regions of the United States. In these major market areas, the task for developing an appropriate franchise is complicated by the changing functional nature of the cable systems…

Energy issues, destabilization challenge? The nuclear power example

International Nuclear Information System (INIS)

Castel, Viviane du

2010-01-01

The depletion of oil, geopolitical uncertainties resulting, fluctuation and price volatility leads, since the 2000's, a development in which the economy favors nuclear energy for civilian use. Thus, the development of the international market for nuclear industry is linked to the competitiveness of nuclear deal with their competitors using fossil fuels (oil, gas, coal). Nuclear power is both an energy benefit to the countries that we use (low emissions of greenhouse gas emissions, low pollution, stable prices and competitive supply without major obstacles) and worrying (no real solution for waste, transfer risk from civilian to nuclear weapons). The Business Intelligence (BI) appears to be essential for companies in this industry and is based on technical and urgent challenges. BI has become an imperative for companies in the energy sector

The challenge of conceiving

DEFF Research Database (Denmark)

Hansen, Claus Thorp; Jørgensen, Ulrik

2011-01-01

the perspective of engineering design challenges where the need for problem identification is obvious to avoid the pitfall to reproduce and piecemeal engineer already existing product or service concepts. Problem identification is not a simple desk research task as it often involves a multitude of actors having......One of the big challenges in the CDIO approach to engineering education is the first part focusing on conceiving problems to be handled and eventually solved. Traditional engineering education has been dominated by its focus on technical disciplines emphasising their individual tool box of problem...

Challenges facing production grids

Energy Technology Data Exchange (ETDEWEB)

Pordes, Ruth; /Fermilab

2007-06-01

Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

Developing non-technical ward-round skills.

Science.gov (United States)

Harvey, Rachel; Mellanby, Edward; Dearden, Effie; Medjoub, Karima; Edgar, Simon

2015-10-01

Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform. There is evidence that newly qualified doctors are not adequately prepared by their undergraduate experiences for this task. The aim of this study was to analyse the challenges pertaining to non-technical skills that students would face during ward rounds, and to create a model that facilitates the transition from medical student to doctor. A total of 217 final-year medical students completed a simulated ward round. Free-text responses were analysed using template analysis applying an a priori template developed from the literature by the research team. This drew on the generic categories of non-technical skills suggested by Flin et al. Ninety-seven per cent of students agreed or strongly agreed that the simulated ward round improved their insight into the challenges of ward rounds and their perceived ability to work efficiently as an active member of the ward round. The responding students (206) submitted written feedback describing the learning that they planned to use: 800 learning points were recorded, and all could be categorised into one of seven non-technical skills. Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform We believe that improved task efficiency and insight into the challenges of the ward round gained by medical students will lead to an enhancement in performance during clinical rounds, and will have a positive impact on patient safety. We would suggest that undergraduate medical schools consider this model in the preparation for the clinical practice element of the curriculum. © 2015 John Wiley & Sons Ltd.

A Qualitative Study of the Job Challenges of Instructional Deans in the Technical College System of Georgia

Science.gov (United States)

Alford, Perrin J.

2014-01-01

The Technical College System of Georgia serves the people and the state by creating a system of technical education whose purpose is to use the latest technology and easy access for all adult Georgians and corporate citizens. Within each technical college is a hierarchy of faculty, staff, and administrators. The instructional deans serve a vital…

Hydrogen Production Technical Team Roadmap

Energy Technology Data Exchange (ETDEWEB)

None

2013-06-01

The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

Technical Challenge and Demonstration of Advanced Solution Monitoring and Measurement System (ASMS)

International Nuclear Information System (INIS)

Takaya, A.; Mukai, Y.; Nakamura, H.; Hosoma, T.; Yoshimoto, K.; Tamura, T.; Iwamoto, T.

2010-01-01

JNFL and JAEA have collaboratively started to develop an Advanced Solution Measurement and monitoring System (ASMS) as a part of technical challenge intended for next generation safeguards NDA equipment. After we completed feasibility study by using small detectors, the second stage of ASMS has installed into PCDF tank located in a cell, and then tested and calibrated by Pu nitrate solution experimentally. There was no experience measuring around 50kg Pu inventory directly, so it was very challenging work. The conventional SMMS (Solution Monitoring and Measurement System) that is composed of precision manometers acquires density, level and temperature of solution, so that the sampling and analysis are essential to obtain the nuclear material amount in the tank. The SMMS has two weak points on verification and monitoring of the nuclear material flow and inventory; (1) Direct measurement of the inventory cannot be done, (2) Solution rework and reagent adjustment operation in actual plant will make miss-interpretation on the monitoring evaluation. The purpose of ASMS development is to establish quantitative plutonium mass measurement technique directly by NDA of high concentrated pure plutonium nitrate solution and monitoring capability for solution transfers in a process. The merits of ASMS are considered below; (1) Provide direct Pu measurement and continuous monitoring capability, (2) Eliminate sampling and analysis at IIV, (3) Reduce unmeasured inventory. The target of the measurement uncertainty of ASMS is set less than 6% (1sigma) which is equivalent to meet the detection level of the partial defect at IIV by NDA. Known-alpha coincidence counting technique is applied to the ASMS, which is similar to the NDAs for MOX powder as a principle measurement technique. Especially, three following points are key techniques to establish ASMS. (1) Pre-determination of plutonium isotopic composition because it impacts alpha and rho-zero values to obtain multiplication

TECHNICAL ASPECTS REGARDING THE IMPROVEMENT OF AEROSPACE AIR DEFENSE VECTORS’ PERFORMANCES

Directory of Open Access Journals (Sweden)

Vasile SANDRU

2013-01-01

Full Text Available Confronted with the spectacular evolution of the aircraft and other aerial vehicles, the systems destined to combat them, especially Surface-to-Air Missile Systems (SAMS, went through an accelerated loss of their performance. The financial crisis has forced an extension of the system operation even if the system is outdated. Therefore, a new modernized version has been designed. Many times, it is better to improve an existing system than to buy a new one. This article describes the diversity of SAMS’s challenges, involving a decrease in time regarding their number. The types of challenges can be divided in two categories: technical and institutional ones. The technical challenges can be also divided in two categories: deterioration of material and obsolescence. The classes of material that present interest for us are aerodynamic vector structure, propulsion, and special systems. From an institutional point of view, the main problems are: cost versus performance and cost versus the remaining lifetime (technical resource of the air defense system. The article finishes with conclusions that support the possibility and necessity of a SAMS upgrade, given the change of the threats characteristics.

Exploring Pair Programming Benefits for MIS Majors

Directory of Open Access Journals (Sweden)

April H. Reed

2016-12-01

Full Text Available Pair programming is a collaborative programming practice that places participants in dyads, working in tandem at one computer to complete programming assignments. Pair programming studies with Computer Science (CS and Software Engineering (SE majors have identified benefits such as technical productivity, program/design quality, academic performance, and increased satisfaction for their participants. In this paper, pair programming is studied with Management Information Systems (MIS majors, who (unlike CS and SE majors taking several programming courses typically take only one programming course and often struggle to develop advanced programming skills within that single course. The researchers conducted two pair programming experiments in an introductory software development course for MIS majors over three semesters to determine if pair programming could enhance learning for MIS students. The program results, researchers’ direct observations, and participants’ responses to a survey questionnaire were analyzed after each experiment. The results indicate that pair programming appears to be beneficial to MIS students’ technical productivity and program design quality, specifically the ability to create programs using high-level concepts. Additionally, results confirmed increased student satisfaction and reduced frustration, as the pairs worked collaboratively to produce a program while actively communicating and enjoying the process.

Evolving the Nation's Energy Infrastructure: A Challenging System Issue for the Twenty-First Century; Preprint

Energy Technology Data Exchange (ETDEWEB)

Garrett, B.

2007-04-01

Over the next several decades, a profound transformation of the global energy enterprise will occur driven largely by population growth and economic development. How this growing demand for energy is met poses one of the most complex and challenging issues of our time. The current national energy dialogue reflects the challenge in simultaneously considering the social, political, economic, and technical issues as the energy system is defined, technical targets are established, and programs and investments are implemented to meet those technical targets. This paper examines the general concepts and options for meeting this challenge.

Global challenges

International Nuclear Information System (INIS)

Blix, H.

1990-01-01

A major challenge now facing the world is the supply of energy needed for growth and development in a manner which is not only economically viable but also environmentally acceptable and sustainable in view of the demands of and risks to future generations. The internationally most significant pollutants from energy production through fossil fuels are SO 2 and NO x which cause acid rain, and CO 2 which is the most significant contributor to the greenhouse effect. Nuclear power, now providing about 17% of the world's electricity and 5% of the primary energy already is making a notable contribution to avoiding these emissions. While the industrialized countries will need more energy and especially electricity in the future, the needs of the developing countries are naturally much larger and present a tremendous challenge to the shaping of the world's future energy supply system. The advanced countries will have to accept special responsibilities, as they can most easily use advanced technologies and they have been and remain the main contributors to the environmental problems we now face. Energy conservation and resort to new renewable energy sources, though highly desirable, appear inadequate alone to meet the challenges. The world can hardly afford to do without an increased use of nuclear power, although it is strongly contested in many countries. The objections raised against the nuclear option focus on safety, waste management and disposal problems and the risk for proliferation of nuclear weapons. These issues are not without their problems. The risk of proliferation exists but will not appreciably diminish with lesser global reliance on nuclear power. The waste issue is more of a political than a technical problem. The use of nuclear power, or any other energy source, will never be at zero risk, but the risks are constantly reduced by new techniques and practices. The IAEA sees it as one of its priority tasks to promote such techniques. (author)

Job and task analysis for technical staff

International Nuclear Information System (INIS)

Toline, B.C.

1991-01-01

In September of 1989 Cooper Nuclear Station began a project to upgrade the Technical Staff Training Program. This project's roots began by performing job and Task Analysis for Technical Staff. While the industry has long been committed to Job and Task Analysis to target performance based instruction for single job positions, this approach was unique in that it was not originally considered appropriate for a group as diverse as Tech Staff. Much to his satisfaction the Job and Task Analysis Project was much less complicated for Technical Staff than the author had imagined. The benefits of performing the Job and Task Analysis for Technical Staff have become increasingly obvious as he pursues lesson plan development and course revisions. The outline for this presentation will be as follows: philosophy adopted; preparation of the job survey document; performing the job analysis; performing task analysis for technical staff and associated pitfalls; clustering objectives for training and comparison to existing program; benefits now and in the future; final phase (comparison to INPO guides and meeting the needs of non-degreed engineering professionals); and conclusion. By focusing on performance based needs for engineers rather than traditional academics for training the author is confident the future Technical Staff Program will meet the challenges ahead and will exceed requirements for accreditation

Major KEEP Findings, 1971 - 1975.

Science.gov (United States)

Kamehameha Schools, Honolulu, HI. Kamehameha Early Education Project.

This report lists the 34 major research findings from the Kamehameha Early Education Program (KEEP) for the years 1971-1975. Each finding is accompanied by a listing of KEEP technical reports and working papers which contain information relevant to that finding. Included among areas covered in the findings are: (1) student motivation, (2) teacher…

Well construction hydraulics in challenging environments; Hidraulica de construcao de pocos em cenarios criticos

Energy Technology Data Exchange (ETDEWEB)

Martins, Andre Leibsohn; Folsta, Mauricio Gimenes; Waldmann, Alex Tadeu de Almeida; Gandelman, Roni Abensur [Centro de Pesquisas da Petrobras (CENPES). Gerencia de Interacao Rocha-Fluido (Brazil)], e-mails: aleibsohn@petrobras.com.br, folsta@petrobras.com.br, awaldmann@petrobras.com.br, roniag@petrobras.com.br; Aragao, Atila Fernando Lima [E and P Construcao de Pocos Maritimos. Gerencia de Tecnologia de Fluidos (Brazil)], e-mail: atila-aragao@petrobras.com.br; Aranha, Pedro Esteves [Centro de Pesquisas da Petrobras (CENPES). Gerencia de Perfuracao e Completacao de Pocos (Brazil)], e-mail: pearanha@petrobras.com.br

2009-12-15

This article reports the main R and D efforts on well bore construction hydraulics which facilitated the technological development of major Brazilian offshore fields in challenging scenarios. These include: deep and ultra deep water exploratory campaigns, inclined, horizontal and complex trajectory development wells, extended reach wells, long horizontal section wells and drilling through sensitive formations (heavy oil reservoirs, salt zones and fractured carbonates). The relevant scenarios, technical aspects, project development strategies, the history of well bore hydraulics in the main PETROBRAS R and D programs, as well as the contribution of Brazilian universities are detailed. (author)

Major intraoperative complications during video-assisted thoracoscopic anatomical lung resections

DEFF Research Database (Denmark)

Decaluwe, Herbert; Petersen, René Horsleben; Hansen, Henrik

2015-01-01

OBJECTIVES: A multicentre evaluation of the frequency and nature of major intraoperative complications during video-assisted thoracoscopic (VATS) anatomical resections. METHODS: Six European centres submitted their series of consecutive anatomical lung resections with the intention to treat by VATS...... for technical reasons. In-hospital mortality was 1.4% (n = 43). Conversion to open thoracotomy was observed in 5.5% (n = 170), of whom 21.8% (n = 37) were for oncological reasons, 29.4% (n = 50) for technical reasons and 48.8% (n = 83) for complications. Vascular injuries were reported in 2.9% (n = 88) patients...... major surgery (n = 9) or immediate life-threatening complications (n = 17). Twenty-three percent of the in-hospital mortalities (n = 10/43) were related to major intraoperative complications. Eight pneumonectomies (five intraoperative and three postoperative at 0.3%) were a consequence of a major...

Major Challenges for the Modern Chemistry in Particular and Science in General.

Science.gov (United States)

Uskokovíc, Vuk

2010-11-01

In the past few hundred years, science has exerted an enormous influence on the way the world appears to human observers. Despite phenomenal accomplishments of science, science nowadays faces numerous challenges that threaten its continued success. As scientific inventions become embedded within human societies, the challenges are further multiplied. In this critical review, some of the critical challenges for the field of modern chemistry are discussed, including: (a) interlinking theoretical knowledge and experimental approaches; (b) implementing the principles of sustainability at the roots of the chemical design; (c) defining science from a philosophical perspective that acknowledges both pragmatic and realistic aspects thereof; (d) instigating interdisciplinary research; (e) learning to recognize and appreciate the aesthetic aspects of scientific knowledge and methodology, and promote truly inspiring education in chemistry. In the conclusion, I recapitulate that the evolution of human knowledge inherently depends upon our ability to adopt creative problem-solving attitudes, and that challenges will always be present within the scope of scientific interests.

Cerebrovascular reactivity (CVR) MRI with CO2 challenge: A technical review.

Science.gov (United States)

Liu, Peiying; B De Vis, Jill; Lu, Hanzhang

2018-03-21

Cerebrovascular reactivity (CVR) is an indicator of cerebrovascular reserve and provides important information about vascular health in a range of brain conditions and diseases. Unlike steady-state vascular parameters, such as cerebral blood flow (CBF) and cerebral blood volume (CBV), CVR measures the ability of cerebral vessels to dilate or constrict in response to challenges or maneuvers. Therefore, CVR mapping requires a physiological challenge while monitoring the corresponding hemodynamic changes in the brain. The present review primarily focuses on methods that use CO2 inhalation as a physiological challenge while monitoring changes in hemodynamic MRI signals. CO2 inhalation has been increasingly used in CVR mapping in recent literature due to its potency in causing vasodilation, rapid onset and cessation of the effect, as well as advances in MRI-compatible gas delivery apparatus. In this review, we first discuss the physiological basis of CVR mapping using CO2 inhalation. We then review the methodological aspects of CVR mapping, including gas delivery apparatus, the timing paradigm of the breathing challenge, the MRI imaging sequence, and data analysis. In addition, we review alternative approaches for CVR mapping that do not require CO2 inhalation. Copyright © 2018. Published by Elsevier Inc.

Challenges: a state and compact perspective

International Nuclear Information System (INIS)

Brown, H.

1987-01-01

The challenges facing states and compacts in their efforts to implement the Low-Level Waste Policy Amendments Act are described. Institutional challenges include: small-volume sites; compact maintenance; shifting agencies and changing personnel; and timing of progress. The technical challenge lies in the enormous number of plans, procedures, and regulations that have to be developed over the next four years. There are two main fiscal challenges: funding of day-to-day operations of compact commissions; and financing the siting and construction of new disposal sites. There are also two main regulatory challenges: host states must develop regulations for siting and selection of technology; and all states have to await federal regulations to be completed. The final challenge is political: whether a region can overcome public opposition and actually site a facility

Printed batteries and conductive patterns in technical textiles

Science.gov (United States)

Willert, Andreas; Meuser, Carmen; Baumann, Reinhard R.

2018-05-01

Various applications of functional devices need a tailored and reliable supply of electrical energy. Batteries are electrochemical systems that deliver energy for functional devices and applications. Due to the common use, several rigid types of batteries have been standardized. To fully integrate the battery into a product that is bendable, free in geometry and less than 1 mm thick, printing of power adaptable batteries is a challenging area of research. Therefore, the well-known zinc-manganese system, which is very promising due to its environmental sustainability and its simplicity, has been used to manufacture battery solutions on a new kind of substrate: technical textiles. Another challenge is the deposition of conductive patterns. At present, embroidery with metallic yarn is the only possibility to provide conducting paths on technical textiles, a time-consuming and elaborate process. Screen printed conductive pathways will generate a new momentum in the manufacturing of conductivity on textiles.

Integration Science and Technology of Silicon-Based Ceramics and Composites:Technical Challenges and Opportunities

Science.gov (United States)

Singh, M.

2013-01-01

Ceramic integration technologies enable hierarchical design and manufacturing of intricate ceramic and composite parts starting with geometrically simpler units that are subsequently joined to themselves and/or to metals to create components with progressively higher levels of complexity and functionality. However, for the development of robust and reliable integrated systems with optimum performance for high temperature applications, detailed understanding of various thermochemical and thermomechanical factors is critical. Different technical approaches are required for the integration of ceramic to ceramic and ceramic to metal systems. Active metal brazing, in particular, is a simple and cost-effective method to integrate ceramic to metallic components. Active braze alloys usually contain a reactive filler metal (e.g., Ti, Cr, V, Hf etc) that promotes wettability and spreading by inducing chemical reactions with the ceramics and composites. In this presentation, various examples of brazing of silicon nitride to themselves and to metallic systems are presented. Other examples of joining of ceramic composites (C/SiC and SiC/SiC) using ceramic interlayers and the resulting microstructures are also presented. Thermomechanical characterization of joints is presented for both types of systems. In addition, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be presented.

The Fourth Wave of Digitalization and Public Transport: Opportunities and Challenges

Directory of Open Access Journals (Sweden)

Paul Davidsson

2016-11-01

Full Text Available We investigate the opportunities and challenges of the forth wave of digitalization, also referred to as the Internet of Things (IoT, with respect to public transport and how it can support sustainable development of society. Environmental, economical, and social perspectives are considered through analysis of the existing literature and explorative studies. We conclude that there are great opportunities for both transport operators and planners, as well as for the travelers. We describe and analyze a number of concrete opportunities for each of these actors. However, in order to realize these opportunities, there are also a number of challenges that needs to be addressed. There are both technical challenges, such as data collection issues, interoperability, scalability and information security, and non-technical challenges such as business models, usability, privacy issues, and deployment.

IAEA Safeguards and technical support programs: POTAS in the 1990s

International Nuclear Information System (INIS)

Kessler, C.J.

1991-01-01

The US Program of Technical Assistance to IAEA Safeguards (POTAS) has since 1978 provided technology and technical assistance to the IAEA to support its nuclear safeguards activities. The present level of support, $6.9 million per year, equals 10% of the Department of Safeguards annual budget. During the next decade, the International Atomic Energy Agency (IAEA) will face new technical challenges in carrying out its verification activities. To help the IAEA acquire the technology and other technical support that it will require in the 1990s, POTAS expects to continue its assistance, both in the areas established in the past and in additional areas dictated by newly identified IAEA safeguards requirements. This paper will look at the political and policy context within which the Department of Safeguards, and hence POTAS, operates, and how that context is expected to evolve over the next decade. The roles and functions of POTAS will be identified and discussed in terms of their historical evolution. Lastly, the paper will consider how POTAS is expected to change during the 1990s, both to maintain effectiveness in existing roles and functions, and to meet the challenge of the changing policy context. 5 refs

Technical co-operation report for 2001. Report by the Director General

International Nuclear Information System (INIS)

2001-01-01

Using nuclear technology as an effective tool for development is the challenge faced by the Agency's technical co-operation programme. This was the subject of the 4th IAEA Scientific Forum, entitled 'Nuclear technology for sustainable development: serving human needs,' which was held in conjunction with the 45th General Conference in September 2001. Opening the Forum, Professor Jeffrey Sachs of Harvard University emphasized the importance of developing mechanisms to mobilize science and technology to meet the growing challenge of serving human needs in a sustainable manner and commended the Agency for its achievements in this regard. This report provides information on how the technical co-operation programme has responded to that challenge over the past year. One of the highlights of the technical co-operation programme in 2001 was the launching of the Pan-African Tsetse and Trypanosomosis Eradication Campaign (PATTEC) in Ouagadougou, Burkina Faso, in October. This represented the culmination of years of effort by African Member States, working in partnership with the Agency and the Organization for African Unity (OAU), and was an important milestone in the progress of applying the sterile insect technique (SIT) to the area-wide eradication of the tsetse fly in Africa. It is a good example of how science and technology can contribute to socio-economic development with a direct impact at the community level. The level of Member States' pledges to the Technical Co-operation Fund (TCF) for 2001, more than $59 million, was the second highest ever. This represented a rate of attainment of 80.01% (as of 31 March 2002), thus achieving the target set by the General Conference for that year. The extra budgetary contributions, more than $7 million, were the highest in ten years. These contributions, together with payments of assessed programme costs and other income, meant that total new resources for the year reached $71.1 million. In December 2000, the Board approved an

Technical co-operation report for 2001. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Using nuclear technology as an effective tool for development is the challenge faced by the Agency's technical co-operation programme. This was the subject of the 4th IAEA Scientific Forum, entitled 'Nuclear technology for sustainable development: serving human needs,' which was held in conjunction with the 45th General Conference in September 2001. Opening the Forum, Professor Jeffrey Sachs of Harvard University emphasized the importance of developing mechanisms to mobilize science and technology to meet the growing challenge of serving human needs in a sustainable manner and commended the Agency for its achievements in this regard. This report provides information on how the technical co-operation programme has responded to that challenge over the past year. One of the highlights of the technical co-operation programme in 2001 was the launching of the Pan-African Tsetse and Trypanosomosis Eradication Campaign (PATTEC) in Ouagadougou, Burkina Faso, in October. This represented the culmination of years of effort by African Member States, working in partnership with the Agency and the Organization for African Unity (OAU), and was an important milestone in the progress of applying the sterile insect technique (SIT) to the area-wide eradication of the tsetse fly in Africa. It is a good example of how science and technology can contribute to socio-economic development with a direct impact at the community level. The level of Member States' pledges to the Technical Co-operation Fund (TCF) for 2001, more than $59 million, was the second highest ever. This represented a rate of attainment of 80.01% (as of 31 March 2002), thus achieving the target set by the General Conference for that year. The extra budgetary contributions, more than $7 million, were the highest in ten years. These contributions, together with payments of assessed programme costs and other income, meant that total new resources for the year reached $71.1 million. In December 2000, the Board approved an

Safety of RBMK reactors: Setting the technical framework

International Nuclear Information System (INIS)

Lederman, L.

1996-01-01

This article reviews major efforts for improving the safety of RBMK reactors through a co-operative IAEA programme initiated in 1992. Specifically covered are technical findings of safety reviews related to the design and operation of the plants, and the documentation of findings through an Agency database intended to facilitate the technical co-ordination of ongoing national and international efforts for improving RBMK safety

Integrating Information Services in an Academic Setting: The Organizational and Technical Challenge.

Science.gov (United States)

Branin, Joseph J.; And Others

1993-01-01

Describes a project to integrate the support and delivery of information services to faculty and staff at the University of Minnesota from the planning phase to implementation of a new organizational entity. Topics addressed include technical and organizational integration, control and delivery of services, and networking and organizational fit.…

Steam generator life cycle management challenges - on-going and new build

International Nuclear Information System (INIS)

Spekkens, P.

2009-01-01

Ontario Power Generation (OPG) is committed to the safe, reliable, and cost-effective operation of its fleet of CANDU plants. Steam Generators (SGs) are a major component of the heat transport system in these plants and maintaining their health is an essential element to achieving plant safety, reliability and economic performance. OPG has been actively engaged in formal life cycle management of its SGs for about 15 years. Over this time, we have developed stable, mature, detailed life cycle plans for each of our plants on a unit by unit, and in some cases, SG by SG, basis. These plans have been externally reviewed over the years by our regulator and by other third-party experts, and they've been acknowledged as being among the best life cycle plans anywhere. Although we are pleased that our life cycle plans are as detailed and mature as they are, we certainly aren't fully satisfied because they're not perfect. Even if they were perfect at any point in time, they wouldn't be for very long because the environment is constantly changing, both the technical environment and the business environment. This paper presents some of these challenges and offers some possible solutions or suggestions based on OPG's experience. The paper describes the background on SG life cycle management in OPG, i.e. what it is and how we do it. Then it presents challenges in the following areas: despite having some very detailed and technically strong life cycle plans, we still face some technical issues; in addition, we face challenges in integrating these plans into the overall business processes within the company; up until now, our life cycle planning has been aimed at early-and mid-life in our units. But our units are aging and we are now within sight, at least in a life cycle management sense, of a point at which decisions need to be made on refurbishment, life extension or retirement of the units. We need to adjust our life cycle management approach as we approach those major

Scientific and technical challenges on the road towards fusion electricity

Science.gov (United States)

Donné, A. J. H.; Federici, G.; Litaudon, X.; McDonald, D. C.

2017-10-01

The goal of the European Fusion Roadmap is to deliver fusion electricity to the grid early in the second half of this century. It breaks the quest for fusion energy into eight missions, and for each of them it describes a research and development programme to address all the open technical gaps in physics and technology and estimates the required resources. It points out the needs to intensify industrial involvement and to seek all opportunities for collaboration outside Europe. The roadmap covers three periods: the short term, which runs parallel to the European Research Framework Programme Horizon 2020, the medium term and the long term. ITER is the key facility of the roadmap as it is expected to achieve most of the important milestones on the path to fusion power. Thus, the vast majority of present resources are dedicated to ITER and its accompanying experiments. The medium term is focussed on taking ITER into operation and bringing it to full power, as well as on preparing the construction of a demonstration power plant DEMO, which will for the first time demonstrate fusion electricity to the grid around the middle of this century. Building and operating DEMO is the subject of the last roadmap phase: the long term. Clearly, the Fusion Roadmap is tightly connected to the ITER schedule. Three key milestones are the first operation of ITER, the start of the DT operation in ITER and reaching the full performance at which the thermal fusion power is 10 times the power put in to the plasma. The Engineering Design Activity of DEMO needs to start a few years after the first ITER plasma, while the start of the construction phase will be a few years after ITER reaches full performance. In this way ITER can give viable input to the design and development of DEMO. Because the neutron fluence in DEMO will be much higher than in ITER, it is important to develop and validate materials that can handle these very high neutron loads. For the testing of the materials, a

Regulatory and technical reports compilation for 1980

International Nuclear Information System (INIS)

Oliu, W.E.; McKenzi, L.

1981-04-01

This compilation lists formal regulatory and technical reports and conference proceedings issued in 1980 by the US Nuclear Regulatory Commission. The compilation is divided into four major sections. The first major section consists of a sequential listing of all NRC reports in report-number order. The second major section of this compilation consists of a key-word index to report titles. The third major section contains an alphabetically arranged listing of contractor report numbers cross-referenced to their corresponding NRC report numbers. Finally, the fourth section is an errata supplement

CSNI Technical Opinion Papers No. 16 - Defence in Depth of Electrical Systems

International Nuclear Information System (INIS)

2013-01-01

As all safety systems in the majority of existing nuclear power plants use the preferred power supply, any voltage surges in these systems could lead to common-cause failures. In the event of an unusual electrical system transient, it is essential that safety-related equipment be isolated or protected from the fault in order to ensure its ability to safely shut down the reactor and remove decay heat. Based on the analysis of the voltage surges observed at Forsmark-1 in 2006 and Olkiluoto-1 in 2008, this technical opinion paper summarises the current state of knowledge of in-plant and external grid-related challenges to nuclear power plant safety-related electrical equipment. It will be of particular interest to nuclear safety regulators, nuclear power plant operators and grid system regulators and operators

Efficient Audio Power Amplification - Challenges

DEFF Research Database (Denmark)

Andersen, Michael Andreas E.

2005-01-01

For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where...

Planning for planetary protection : challenges beyond Mars

Science.gov (United States)

Belz, Andrea P.; Cutts, James A.

2006-01-01

This document summarizes the technical challenges to planetary protection for these targets of interest and outlines some of the considerations, particularly at the system level, in designing an appropriate technology investment strategy for targets beyond Mars.

Technical integrity and continuous improvement: Key to survival beyond the nineties

International Nuclear Information System (INIS)

Thorogood, J.L.

1994-01-01

Drilling decisions made before a rig reaches location make a significant contribution to an oil company's financial success. Of value to the company is not the ability to drill wells, but the ability to plan with confidence in the knowledge of what is possible. In spite of this, operators have tended to over-work day to day decisions about drilling out of proportion to their significance. Recognition of this fact has resulted in the present wave of contracting initiatives. A major challenge for the industry is to achieve the necessary transfer of responsibility without compromising the operator's license to operate. These changes will compel the service sector to develop a new culture of technical integrity and continuous improvement. To operate safely, measure performance and manage drilling risk, the transformation will oblige the service sector to adopt many technologies presently owned by oil companies

Plasmodium falciparum Resistance to Artemisinin Derivatives and Piperaquine: A Major Challenge for Malaria Elimination in Cambodia

Science.gov (United States)

Duru, Valentine; Witkowski, Benoit; Ménard, Didier

2016-01-01

Artemisinin-based combination therapies (ACTs) are the cornerstone of current strategies for fighting malaria. Over the last decade, ACTs have played a major role in decreasing malaria burden. However, this progress is being jeopardized by the emergence of artemisinin-resistant Plasmodium falciparum parasites. Artemisinin resistance was first detected in western Cambodia in 2008 and has since been observed in neighboring countries in southeast Asia. The problem of antimalarial drug resistance has recently worsened in Cambodia, with reports of parasites resistant to piperaquine, the latest generation of partner drug used in combination with dihydroartemisinin, leading to worrying rates of clinical treatment failure. The monitoring and the comprehension of both types of resistance are crucial to prevent the spread of multidrug-resistant parasites outside southeast Asia, and particularly to Africa, where the public health consequences would be catastrophic. To this end, new tools are required for studying the biological and molecular mechanisms underlying resistance to antimalarial drugs and for monitoring the geographic distribution of the resistant parasites. In this review, we detail the major advances in our understanding of resistance to artemisinin and piperaquine and define the challenges that the malaria community will have to face in the coming years. PMID:27928074

Non-Technical Skills Bingo-a game to facilitate the learning of complex concepts

DEFF Research Database (Denmark)

Dieckmann, Gerhard Peter; Glavin, Ronnie; Jepsen, Rikke Malene Hartvigsen Grønholm

2016-01-01

Acquiring the concepts of non-technical skills (NTS) beyond a superficial level is a challenge for healthcare professionals and simulation faculty. Current simulation-based approaches to teach NTS are challenged when learners have to master NTS concepts, clinically challenging situations, and sim....... NTS Bingo is based on theoretical considerations on concept learning, which we describe to support the rationale for its conduct....

Technical issues for WIPP

International Nuclear Information System (INIS)

Hunter, T.O.

1979-01-01

Emplacement of wastes in the WIPP will include experiments on various waste types which will provide essential data on waste-rock interaction and repository response. These experiments will include evolution of the synergistic effects of both heat production, radiation, and actual waste forms. While these studies will provide essential data on the validity of waste isolation in bedded salt, they will be preceded by a broad-based experimental program which will resolve many of the current technical issues providing not only an assessment of the safety of performing such experiments but also the technical basis for assurance that the appropriate experiments are performed. Data and predictive modeling techniques, which are currently available, can bound the consequences associated with these technical issues. Predictions of the impact on public safety based on these analyses indicate that safe waste disposal in WIPP salt beds is achievable; however, a major use of WIPP will be to conduct realistic experiments with HLW forms to address some of the unresolved details of these waste/salt interactions

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

Science.gov (United States)

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

Technical guide to criticality alarm system design

International Nuclear Information System (INIS)

Greenfield, B.

2009-01-01

An instructional manual was created to guide criticality safety engineers through the technical aspects of designing a criticality alarm system (CAS) for Dept. of Energy (DOE) hazard class 1 and 2 facilities. The manual was structured such that it can be used by engineers designing completely new systems and by those who are working with existing facilities. Major design tasks are thoroughly analyzed to provide concise direction for how to complete the analysis. Regulatory and technical performance requirements were both addressed. (authors)

Semiconductor product analysis challenges based on the 1999 ITRS

International Nuclear Information System (INIS)

Joseph, Thomas W.; Anderson, Richard E.; Gilfeather, Glen; LeClaire, Carole; Yim, Daniel

2001-01-01

One of the most significant challenges for technology characterization and failure analysis is to keep instrumentation and techniques in step with the development of technology itself. Not only are dimensions shrinking and new materials being employed, but the rate of change is increasing. According to the 1999 International Technology Roadmap for Semiconductors, 'The number and difficulty of the technical challenges continue to increase as technology moves forward'. It could be argued that technology cannot be developed without appropriate analytical techniques; nevertheless while much effort is being directed at materials and processes, only a small proportion is being directed at analysis. Whereas previous versions of the Semiconductor Industry Association roadmap contained a small number of implicit references to characterization and analysis, the 1999 ITRS contains many explicit references. It is clear that characterization is now woven through the roadmap, and technology developers in all areas appreciate the fact that new instrumentation and techniques will be required to sustain the rate of development the semiconductor industry has seen in recent years. Late in 1999, a subcommittee of the Sematech Product Analysis Forum (PAF) reviewed the ITRS and identified a 'top-ten' list of challenges which the failure analysis community will face as present technologies are extended and future technologies are developed. This paper discusses the PAF top-ten list of challenges, which is based primarily on the Difficult Challenges tables from each ITRS working group. Eight of the top-ten are challenges of significant technical magnitude; only two could be considered non-technical in nature. Most of these challenges cut across several working group areas and could be considered common threads in the roadmap, ranging from fault simulation and modeling to imaging small features, from electrical defect isolation to deprocessing. While evolutionary changes can be anticipated

Explicating the Sustainable Design of Technical Artefacts

DEFF Research Database (Denmark)

Vissonova, Karina

2016-01-01

afforded by the properties of artefacts. The study is a conceptual analysis and as such belongs to the field of epistemology of design. It offers three contributions to the design discipline: (1) a proposition of the definition of the sustainable design kind; (2) a proposition of the concept of technical......Sustainable design of technical artefacts is referred to as if it were a kind of design with some specific characteristics. However, in design research and practice alike, there appears to be a lack of shared conceptions of what such a design might entail. Furthermore, we have no clear grounds...... for evaluating what makes the sustainable design solutions permissible. The lack of shared conceptions is largely due to ambiguities associated with the notion of sustainability. In response to these challenges, the aim of my study is to offer a definition of sustainable design of technical artefacts. I argue...

Technical Writing 1987: Galloping Off in at Least Two Directions.

Science.gov (United States)

Stohrer, Freda F.

Technical writing instructors generally agree about the absolute need for communication skills throughout the technological work place, but a survey of technical writing journal articles shows a lack of focus on ways to address business's needs for on-the-job literacy. One major advance within the profession in recent years has been the…

Technical assistance contractor Management Plan

International Nuclear Information System (INIS)

1993-09-01

The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins ampersand Beckwith Agra, Inc. (SHB Agra), and Geraghty ampersand Miller, Inc. (G ampersand M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC's groundwater technical breadth and depth, so G ampersand M was brought in to augment the team's capabilities. The TAC contract's scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC's management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls

A Step Towards A Computing Grid For The LHC Experiments ATLAS Data Challenge 1

CERN Document Server

Sturrock, R; Epp, B; Ghete, V M; Kuhn, D; Mello, A G; Caron, B; Vetterli, M C; Karapetian, G V; Martens, K; Agarwal, A; Poffenberger, P R; McPherson, R A; Sobie, R J; Amstrong, S; Benekos, N C; Boisvert, V; Boonekamp, M; Brandt, S; Casado, M P; Elsing, M; Gianotti, F; Goossens, L; Grote, M; Hansen, J B; Mair, K; Nairz, A; Padilla, C; Poppleton, A; Poulard, G; Richter-Was, Elzbieta; Rosati, S; Schörner-Sadenius, T; Wengler, T; Xu, G F; Ping, J L; Chudoba, J; Kosina, J; Lokajícek, M; Svec, J; Tas, P; Hansen, J R; Lytken, E; Nielsen, J L; Wäänänen, A; Tapprogge, Stefan; Calvet, D; Albrand, S; Collot, J; Fulachier, J; Ledroit-Guillon, F; Ohlsson-Malek, F; Viret, S; Wielers, M; Bernardet, K; Corréard, S; Rozanov, A; De Vivie de Régie, J B; Arnault, C; Bourdarios, C; Hrivnác, J; Lechowski, M; Parrour, G; Perus, A; Rousseau, D; Schaffer, A; Unal, G; Derue, F; Chevalier, L; Hassani, S; Laporte, J F; Nicolaidou, R; Pomarède, D; Virchaux, M; Nesvadba, N; Baranov, S; Putzer, A; Khonich, A; Duckeck, G; Schieferdecker, P; Kiryunin, A E; Schieck, J; Lagouri, T; Duchovni, E; Levinson, L; Schrager, D; Negri, G; Bilokon, H; Spogli, L; Barberis, D; Parodi, F; Cataldi, G; Gorini, E; Primavera, M; Spagnolo, S; Cavalli, D; Heldmann, M; Lari, T; Perini, L; Rebatto, D; Resconi, S; Tatarelli, F; Vaccarossa, L; Biglietti, M; Carlino, G; Conventi, F; Doria, A; Merola, L; Polesello, G; Vercesi, V; De Salvo, A; Di Mattia, A; Luminari, L; Nisati, A; Reale, M; Testa, M; Farilla, A; Verducci, M; Cobal, M; Santi, L; Hasegawa, Y; Ishino, M; Mashimo, T; Matsumoto, H; Sakamoto, H; Tanaka, J; Ueda, I; Bentvelsen, Stanislaus Cornelius Maria; Fornaini, A; Gorfine, G; Groep, D; Templon, J; Köster, L J; Konstantinov, A; Myklebust, T; Ould-Saada, F; Bold, T; Kaczmarska, A; Malecki, P; Szymocha, T; Turala, M; Kulchitskii, Yu A; Khoreauli, G; Gromova, N; Tsulaia, V; Minaenko, A A; Rudenko, R; Slabospitskaya, E; Solodkov, A; Gavrilenko, I; Nikitine, N; Sivoklokov, S Yu; Toms, K; Zalite, A; Zalite, Yu; Kervesan, B; Bosman, M; González, S; Sánchez, J; Salt, J; Andersson, N; Nixon, L; Eerola, Paule Anna Mari; Kónya, B; Smirnova, O G; Sandgren, A; Ekelöf, T J C; Ellert, M; Gollub, N; Hellman, S; Lipniacka, A; Corso-Radu, A; Pérez-Réale, V; Lee, S C; CLin, S C; Ren, Z L; Teng, P K; Faulkner, P J W; O'Neale, S W; Watson, A; Brochu, F; Lester, C; Thompson, S; Kennedy, J; Bouhova-Thacker, E; Henderson, R; Jones, R; Kartvelishvili, V G; Smizanska, M; Washbrook, A J; Drohan, J; Konstantinidis, N P; Moyse, E; Salih, S; Loken, J; Baines, J T M; Candlin, D; Candlin, R; Clifft, R; Li, W; McCubbin, N A; George, S; Lowe, A; Buttar, C; Dawson, I; Moraes, A; Tovey, Daniel R; Gieraltowski, J; Malon, D; May, E; LeCompte, T J; Vaniachine, A; Adams, D L; Assamagan, Ketevi A; Baker, R; Deng, W; Fine, V; Fisyak, Yu; Gibbard, B; Ma, H; Nevski, P; Paige, F; Rajagopalan, S; Smith, J; Undrus, A; Wenaus, T; Yu, D; Calafiura, P; Canon, S; Costanzo, D; Hinchliffe, Ian; Lavrijsen, W; Leggett, C; Marino, M; Quarrie, D R; Sakrejda, I; Stravopoulos, G; Tull, C; Loch, P; Youssef, S; Shank, J T; Engh, D; Frank, E; Sen-Gupta, A; Gardner, R; Meritt, F; Smirnov, Y; Huth, J; Grundhoefer, L; Luehring, F C; Goldfarb, S; Severini, H; Skubic, P L; Gao, Y; Ryan, T; De, K; Sosebee, M; McGuigan, P; Ozturk, N

2004-01-01

The ATLAS Collaboration at CERN is preparing for the data taking and analysis at the LHC that will start in 2007. Therefore, a series of Data Challenges was started in 2002 whose goals are the validation of the Computing Model, of the complete software suite, of the data model, and to ensure the correctness of the technical choices to be made for the final offline computing environment. A major feature of the first Data Challenge (DC1) was the preparation and the deployment of the software required for the production of large event samples as a worldwide distributed activity. It should be noted that it was not an option to "run the complete production at CERN" even if we had wanted to; the resources were not available at CERN to carry out the production on a reasonable time-scale. The great challenge of organising and carrying out this large-scale production at a significant number of sites around the world had therefore to be faced. However, the benefits of this are manifold: apart from realising the require...

Exploring Pair Programming Benefits for MIS Majors

Science.gov (United States)

Dongo, Tendai; Reed, April H.; O'Hara, Margaret

2016-01-01

Pair programming is a collaborative programming practice that places participants in dyads, working in tandem at one computer to complete programming assignments. Pair programming studies with Computer Science (CS) and Software Engineering (SE) majors have identified benefits such as technical productivity, program/design quality, academic…

Technical aspects and limitations of fractional flow reserve measurement.

Science.gov (United States)

Jerabek, Stepan; Kovarnik, Tomas

2018-02-27

The only indication for coronary revascularization is elimination of ischaemia. Invasive hemodynamic methods (fractional flow reserve - FFR and instantaneous wave-free ratio (iFR) are superior to coronary angiography in detection of lesions causing myocardial ischaemia. Current European guidelines for myocardial revascularization recommend using of FFR for detection of functional assessment of lesions severity in category IA and number of these procedures increases. However, routine usage of these methods requires knowledge of technical requirements and limitations. The aim of the study is to summarise good clinical practice for FFR and iFR measurements with explanation of possible technical challenges, that are necessary for increasing of measurement accuracy. Authors describe frequent technical mistakes and malpractice during invasive assessment of lesion severity in coronary arteries.

Engineering ethics challenges and opportunities

CERN Document Server

Bowen, W Richard

2014-01-01

Engineering Ethics: Challenges and Opportunities aims to set a new agenda for the engineering profession by developing a key challenge: can the great technical innovation of engineering be matched by a corresponding innovation in the acceptance and expression of ethical responsibility?  Central features of this stimulating text include:   ·         An analysis of engineering as a technical and ethical practice providing great opportunities for promoting the wellbeing and agency of individuals and communities. ·         Elucidation of the ethical opportunities of engineering in three key areas:             - Engineering for Peace, emphasising practical amelioration of the root causes of    conflict rather than military solutions.             - Engineering for Health, focusing on close collaboration with healthcare professionals      for both the promotion and restoration of health.             - Engineering for Development, providing effective solution...

Future nuclear regulatory challenges. A report by the NEA Committee on Nuclear Regulatory Activities

International Nuclear Information System (INIS)

1998-01-01

Future challenges are considered that may arise from technical, socio-economic and political issues; organizational, management and human aspects; and international issues. The perceived challenges have been grouped into four categories, each covered by a chapter. Technical issues are addressed that many present regulatory challenges in the future: ageing nuclear power plants. External changes to industry are considered next that have an effect on regulators, privatization, cost reduction consequences, commercialization etc. It is followed by the impacts of internal changes: organizational, managerial, human-resources, licensing, staff training etc. Finally, international issues are discussed with potential regulatory impact. (R.P.)

Technical requirement of experiments and facilities for fusion nuclear technology

International Nuclear Information System (INIS)

Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

1986-06-01

The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

INMM Physical Protection Technical Working Group Workshops

International Nuclear Information System (INIS)

Williams, J.D.

1982-01-01

The Institute of Nuclear Materials Management (INMM) established the Physical Protection Technical Working Group to be a focal point for INMM activities related to the physical protection of nuclear materials and facilities. The Technical Working Group has sponsored workshops with major emphasis on intrusion detection systems, entry control systems, and security personnel training. The format for these workshops has consisted of a series of small informal group discussions on specific subject matter which allows direct participation by the attendees and the exchange of ideas, experiences, and insights. This paper will introduce the reader to the activities of the Physical Protection Technical Working Group, to identify the workshops which have been held, and to serve as an introduction to the following three papers of this session

Access to water: Technical and social solutions help communities ...

International Development Research Centre (IDRC) Digital Library (Canada)

Access to water: Technical and social solutions help communities make the most of available sources. 08 décembre 2010. Image. IDRC Communications. LASTING IMPACTS. IDRC-supported research engages communities, and countries, in developing durable solutions to water problems. Whatever the challenge, people ...

Microstomia in a maxillectomy patient: A prosthetic challenge

Directory of Open Access Journals (Sweden)

Shushant K Garg

2011-01-01

Full Text Available The provision of a satisfactory denture in case of reduced stomal inlet has always been a trouble for the patient and a challenge to the prosthodontist. Fabrication of complete and removable partial denture prosthesis requires accurate diagnostic impression and diagnostic casts for the development of custom trays and final impression. The decreased mouth opening, technically called "Microstomia," poses problems in tray selection, impression making, jaw records and denture insertion. The causes for microstomia are numerous, one major cause being the after-effect of radiation therapy. Whatever the cause, the ability to make impressions and jaw records becomes taxing. A variety of impression techniques using modifications in the nature of the tray and impression materials are required. The present case report highlights an innovative and different aspect of impression making and fabrication of an obturator prosthesis for a microstomic patient who underwent maxillectomy.

Efficient audio power amplification - challenges

Energy Technology Data Exchange (ETDEWEB)

Andersen, Michael A.E.

2005-07-01

For more than a decade efficient audio power amplification has evolved and today switch-mode audio power amplification in various forms are the state-of-the-art. The technical steps that lead to this evolution are described and in addition many of the challenges still to be faced and where extensive research and development are needed is covered. (au)

The challenge of developing thin mirror shells for future x-ray telescopes

Science.gov (United States)

Döhring, Thorsten; Stollenwerk, Manfred; Gong, Qingqing; Proserpio, Laura; Winter, Anita; Friedrich, Peter

2015-09-01

Previously used mirror technologies are not able to fulfil the requirements of future X-ray telescopes due to challenging requests from the scientific community. Consequently new technical approaches for X-ray mirror production are under development. In Europe the technical baseline for the planned X-ray observatory ATHENA is the radical new approach of silicon pore optics. NASÁs recently launched NuSTAR mission uses segmented mirrors shells made from thin bended glasses, successfully demonstrating the feasibility of the glass forming technology for X-ray mirrors. For risk mitigation also in Europe the hot slumping of thin glasses is being developed as an alternative technology for lightweight X-ray telescopes. The high precision mirror manufacturing requires challenging technical developments; several design trades and trend-setting decisions need to be made and are discussed within this paper. Some new technical and economic aspects of the intended glass mirror serial production are also studied within the recently started interdisciplinary project INTRAAST, an acronym for "industry transfer of astronomical mirror technologies". The goal of the project, embedded in a cooperation of the Max-Planck-Institute for extraterrestrial Physics and the University of Applied Sciences Aschaffenburg, is to master the challenge of producing thin mirror shells for future X-ray telescopes. As a first project task the development of low stress coatings for thin glass mirror substrates have been started, the corresponding technical approach and first results are presented.

The importance of fungi and mycology for addressing major global challenges*.

Science.gov (United States)

Lange, Lene

2014-12-01

In the new bioeconomy, fungi play a very important role in addressing major global challenges, being instrumental for improved resource efficiency, making renewable substitutes for products from fossil resources, upgrading waste streams to valuable food and feed ingredients, counteracting life-style diseases and antibiotic resistance through strengthening the gut biota, making crop plants more robust to survive climate change conditions, and functioning as host organisms for production of new biological drugs. This range of new uses of fungi all stand on the shoulders of the efforts of mycologists over generations: the scientific discipline mycology has built comprehensive understanding within fungal biodiversity, classification, evolution, genetics, physiology, ecology, pathogenesis, and nutrition. Applied mycology could not make progress without this platform. To unfold the full potentials of what fungi can do for both environment and man we need to strengthen the field of mycology on a global scale. The current mission statement gives an overview of where we are, what needs to be done, what obstacles to overcome, and which potentials are within reach. It further provides a vision for how mycology can be strengthened: The time is right to make the world aware of the immense importance of fungi and mycology for sustainable global development, where land, water and biological materials are used in a more efficient and more sustainable manner. This is an opportunity for profiling mycology by narrating the role played by fungi in the bioeconomy. Greater awareness and appreciation of the role of fungi can be used to build support for mycology around the world. Support will attract more talent to our field of study, empower mycologists around the world to generate more funds for necessary basic research, and strengthen the global mycology network. The use of fungi for unlocking the full potentials of the bioeconomy relies on such progress. The fungal kingdom can be an

The Challenge of Non-Technical Loss Detection using Artificial Intelligence: A Survey

OpenAIRE

Glauner, Patrick; Meira, Jorge Augusto; Valtchev, Petko; State, Radu; Bettinger, Franck

2016-01-01

Detection of non-technical losses (NTL) which include electricity theft, faulty meters or billing errors has attracted increasing attention from researchers in electrical engineering and computer science. NTLs cause significant harm to the economy, as in some countries they may range up to 40% of the total electricity distributed. The predominant research direction is employing artificial intelligence to predict whether a customer causes NTL. This paper first provides an overview ...

Major hazards onshore and offshore

International Nuclear Information System (INIS)

1992-01-01

This symposium continues the tradition of bringing together papers on a topic of current interest and importance in terms of process safety - in this case, Major Hazards Onshore and Offshore. Lord Cullen in his report on the Piper Alpha disaster has, in effect, suggested that the experience gained in the control of major hazards onshore during the 1980s should be applied to improve safety offshore during the 1990s. This major three-day symposium reviews what has been learned so far with regard to major hazards and considers its present and future applications both onshore and offshore. The topics covered in the programme are wide ranging and deal with all aspects of legislation, the application of regulations, techniques for evaluating hazards and prescribing safety measures in design, construction and operation, the importance of the human factors, and recent technical developments in protective measures, relief venting and predicting the consequences of fires and explosions. (author)

Tanks Focus Area FY98 midyear technical review

Energy Technology Data Exchange (ETDEWEB)

Schlahta, S.N.; Brouns, T.M.

1998-06-01

The Tanks Focus Area (TFA) serves as the DOE`s Office of Environmental Management`s national technology and solution development program for radioactive waste tank remediation. Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. In total, 17 technologies and technical solutions were selected for review. The purpose of each review was to understand the state of development of each technology selected for review and to identify issues to be resolved before the technology or technical solution progressed to the next level of maturity. The reviewers provided detailed technical and programmatic recommendations and comments. The disposition of these recommendations and comments and their impact on the program is documented in this report.

Tanks Focus Area FY98 midyear technical review

International Nuclear Information System (INIS)

Schlahta, S.N.; Brouns, T.M.

1998-06-01

The Tanks Focus Area (TFA) serves as the DOE's Office of Environmental Management's national technology and solution development program for radioactive waste tank remediation. Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. In total, 17 technologies and technical solutions were selected for review. The purpose of each review was to understand the state of development of each technology selected for review and to identify issues to be resolved before the technology or technical solution progressed to the next level of maturity. The reviewers provided detailed technical and programmatic recommendations and comments. The disposition of these recommendations and comments and their impact on the program is documented in this report

US Cyber Challenge Research

Science.gov (United States)

2017-02-01

tactics to prevent future attacks. This project will develop, test, evaluate and assess alternative methods for identifying computer security talent ...RESPONSIBLE PERSON FRANCES ROSE a. REPORT U b. ABSTRACT U c. THIS PAGE U 19b. TELEPHONE NUMBER (Include area code ) N/A Standard Form 298 (Rev. 8...is ever increasing. Meeting the demand for top technical cybersecurity talent is one of the continuing challenges facing military and civilian

Single-stage-to-orbit: Meeting the challenge

Science.gov (United States)

Freeman, Delma C., Jr.; Talay, Theodore A.; Austin, Robert Eugene

1995-10-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, and X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

A challenge for computing in the 21. century: Radwaste knowledge management

International Nuclear Information System (INIS)

Umeki, H.

2007-01-01

Integrated nuclear waste management, including waste disposal, is a technical area characterised by a breadth of required multidisciplinary knowledge that is wider than almost any other industry - covering geology to radiation physics, materials science to microbiology, archaeology to engineering, public communication to advanced IT. It also has an unparalleled depth in time, in terms of project implementation (around 100 years - matched maybe by some medieval cathedrals) and the associated safety case (millions of years - longer than the existence of modern man). If anything, this is even more critical in Japan; which depends on a major nuclear power industry, has complex (and dynamic) geology and a policy of repository siting based on solicitation of volunteer municipalities. The technical challenge of Knowledge Management in such an area, which is suffering more than most from the information explosion caused by the exponentially increasing capacities of modern technology, are truly daunting. In order to take control of the situation, the main R and D organisation in this area (Japan Atomic Energy Agency; JAEA) is planning to develop a Knowledge Management System (KMS) that will ride the wave of cutting edge technology in: Database development and management; Search engines; Expert systems; Management support systems; Security and archiving. This initiative will be complemented by a major reassessment of the modelling approach to performance assessment of repositories and the technology for communication of such complex issues with a wide range of different audiences. The requirements as specified go beyond anything doable with existing technology, so an initial goal will be to build up a team capable of anticipating the areas of active technology development that will provide the required tools - and then tailoring them to provide the infrastructure needed for these very ambitious projects. Although this particular application is of limited scope, the general

Argos at NRPA - added value and major challenges

International Nuclear Information System (INIS)

Thorshaug, S.; Holo, E.N.

2003-01-01

Full text: The national emergency response organization with the Crisis Committee for Nuclear Accidents, their advisors and their information group will gather at NRPA in case of a nuclear or radiological accident. Prognoses and actual measurements presented through a decision support system are regarded being of major importance as a basis for the decision making. ARGOS presents predictions of several quantities that are likely to be of interest to decision makers during and alter an accident, such as air concentration, deposition, effective dose and foodstuff activity. It is expected that ARGOS will be an important tool for the decision makers in case of an accident at a foreign nuclear power plant, at one of the two research reactors in Norway or in case of a nuclear accident in a nuclear powered vessel. Information from meteorological forecasts and atmospheric dispersion models will be of key importance in case of such an accident. Therefore, the main emphasis in the implementation process so far has been on the integration between ARGOS and the long-range dispersion model, SNAP, used at the Norwegian Meteorological Institute. A new technical solution represents an improvement of the existing arrangement within the Norwegian emergency preparedness organization, and facilitates presentation of dose calculations based on numerical weather prediction data in a clear and intuitive manner. ARGOS also represents an improved and more centralized approach to data handling and data processing within the Norwegian nuclear emergency response organization. This is due mainly to its quality as a central repository for different types of measurement data. The data of interest are produced for example by mobile ground- or air-based measuring teams (civilian or military), by measuring stations within the automatic monitoring network or by laboratory analysis of air samples or environmental- and food samples. The ability to graphically present such measuring data together with

Student-Identified Strengths and Challenges of Using Blackboard for Group Projects in a Social Work Course

Directory of Open Access Journals (Sweden)

Melissa B. Littlefield

2002-05-01

Full Text Available Blackboard (TM provides social work educators integrated online communication tools that they can employ to facilitate student learning through features such as e-mail, discussion forums, file exchange, virtual classroom, and links to online resources. This study describes students’ experiences using Blackboard (TM to support a group project assignment. The majority of students found it easy to use and useful for the project, and indicated that they would like to use it in other courses. In addition, students gained technical skills as a result of the group project. Students’ group project grades and final course grades were comparable to those in other sections of the same course taught by this investigator. The findings of this study suggest that online technology can be used to facilitate group assignments for MSW students. The benefits include increased efficiency of group functioning and increased accountability of group members. The challenges include technical problems and student resistance to using the technology.

Big Data Provenance: Challenges, State of the Art and Opportunities

OpenAIRE

Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

2015-01-01

Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and ut...

Socio-technical Spaces: Guiding Politics, Staging Design

DEFF Research Database (Denmark)

Clausen, Christian; Yoshinaka, Yutaka

2005-01-01

This article addresses how insights from the social shaping tradition and political process theory may contribute to an understanding of the sociotechnical design and implementation of change. This idea is pursued through the notion of 'socio-technical spaces' and its delineation, with respect...... political concerns. The paper tentatively points to some analytical implications and to challenges and possibilities for the 'bridging' between spaces otherwise rendered distinct....

AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects

International Nuclear Information System (INIS)

2003-01-01

These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

77 FR 4632 - Defense Federal Acquisition Regulation Supplement; Independent Research and Development Technical...

Science.gov (United States)

2012-01-30

... Federal Acquisition Regulation Supplement; Independent Research and Development Technical Descriptions... Regulation Supplement (DFARS) to require major contractors to report independent research and development (IR... 11414 on March 2, 2011, to revise requirements for reporting IR&D projects to the Defense Technical...

Approach to the E-ELT dome and main structure challenges

Science.gov (United States)

Bilbao, Armando; Murga, Gaizka; Gómez, Celia; Llarena, Javier

2014-07-01

The E-ELT as a whole could be classified as an extremely challenging project. More precisely, it should be defined as an array of many different sub-challenges, which comprise technical, logistical and managerial matters. This paper reviews some of these critical challenges, in particular those related to the Dome and the Main Structure, suggesting ways to face them in the most pragmatic way possible. Technical challenges for the Dome and the Main Structure are mainly related to the need to upscale current design standards to an order of magnitude larger design. Trying a direct design escalation is not feasible; it would not work. A design effort is needed to cross hybridize current design standards with technologies coming from other different applications. Innovative design is therefore not a wish but a must. And innovative design comes along with design risk. Design risk needs to be tackled from two angles: on the one hand through thorough design validation analysis and on the other hand through extensive pre-assembly and testing. And, once again, full scale integrated pre-assembly and testing of extremely large subsystems is not always possible. Therefore, defining a comprehensive test plan for critical components, critical subsystems and critical subassemblies becomes essential. Logistical challenges are linked to the erection site. Cerro Armazones is a remote site and this needs to be considered when evaluating transport and erection requirements. But it is not only the remoteness of the site that needs to be considered. The size of both Dome and Main Structure require large construction cranes and a well defined erection plan taking into account pre-assembly strategies, limited plan area utilization, erection sequence, erection stability during intermediate stages and, very specifically, efficient coordination between the Dome and the Main Structure erection processes. Managerial issues pose another set of challenges in this project. Both the size of the

Coupled plasma filtration adsorption: rationale, technical development and early clinical experience.

Science.gov (United States)

Ronco, Claudio; Brendolan, Alessandra; d'Intini, Vincenzo; Ricci, Zaccaria; Wratten, Mary Lou; Bellomo, Rinaldo

2003-01-01

The adjuvant treatment of sepsis remains a major therapeutic challenge. Blood purification is theoretically appealing if the humoral theory of sepsis is accepted as the basis for intervention. In this setting, blood purification would provide a broad-based restoration of humoral homeostasis thereby avoiding both excessive inflammation and counterinflammation. Several techniques of blood purification have been tried or are under active investigation. One of these is the so-called coupled plasma filtration adsorption (CPFA). CPFA is a novel extracorporeal blood purification therapy aimed at nonselectively reducing the circulating levels and activities of both pro- and anti-inflammatory mediators during sepsis and multiorgan failure. In vitro studies have shown CPFA to be effective in binding a broad range of such mediators proving its technical efficacy. Subsequent animal models have shown a beneficial effect on survival in endotoxemia. These studies have provided the necessary technical developments and biologic rationale for initial human studies. Two phase I/IIa clinical studies have now been performed. Both studies have shown that CPFA improves blood pressure and restores immune function in patients with severe sepsis and multiorgan dysfunction. In this article, we will discuss some of the basic principles involved in sorbent technology, and how these may contribute to treatment efficacy, review animal experiments with CPFA and finally discuss the results of recent human studies and their implications. Copyright 2003 S. Karger AG, Basel

Safeguards and non-proliferation: current challenges and the implications for Australia

International Nuclear Information System (INIS)

Leask, A.; Carlson, J.

2006-01-01

Full text: The expansion of nuclear programs raises the issue of how to ensure this does not increase the risk of nuclear weapons proliferation. The non-proliferation regime - based on the NPT and its verification mechanism, the IAEA safeguards system - has been developed to provide assurance that nuclear programs are exclusively peaceful. Although to date the non-proliferation regime has been remarkably successful, in recent years it has come under serious challenge. Nuclear proliferation is emerging as one of the major issues facing the international community. Addressing technical and institutional aspects of the non-proliferation regime - especially safeguards, but also complementary measures such as export controls, proliferation-resistant technology, and an international framework on sensitive technology - is important. But proliferation is a political problem, and ultimately the success of the non-proliferation regime depends on political resolve to uphold compliance, using incentives and if necessary sanctions. These issues are vitally important to Australia's future. Being a major uranium supplier has strengthened Australia's influence in non-proliferation and safeguards developments

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

Science.gov (United States)

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

The value of information: Current challenges in surveillance implementation.

Science.gov (United States)

Stärk, Katharina D C; Häsler, Barbara

2015-11-01

Animal health surveillance is a complex activity that involves multiple stakeholders and provides decision support across sectors. Despite progress in the design of surveillance systems, some technical challenges remain, specifically for emerging hazards. Surveillance can also be impacted by political interests and costly consequences of case reporting, particularly in relation to international trade. Constraints on surveillance can therefore be of technical, economic and political nature. From an economic perspective, both surveillance and intervention are resource-using activities that are part of a mitigation strategy. Surveillance provides information for intervention decisions and thereby helps to offset negative effects of animal disease and to reduce the decision uncertainty associated with choices on disease control. It thus creates monetary and non-monetary benefits, both of which may be challenging to quantify. The technical relationships between surveillance, intervention and loss avoidance have not been established for most hazards despite being important consideration for investment decisions. Therefore, surveillance cannot just be maximised to minimise intervention costs. Economic appraisals of surveillance need to be done on a case by case basis for any hazard considering both surveillance and intervention performance, the losses avoided and the values attached to them. This can be achieved by using an evaluation approach which provides a systematic investigation of the worth or merit of surveillance activities. Evaluation is driven by a specific evaluation question which for surveillance systems commonly considers effectiveness, efficiency, implementation and/or compliance issues. More work is needed to provide guidance on the appropriate selection of evaluation attributes and general good practice in surveillance evaluation. Due to technical challenges, economic constraints and variable levels of capacity, the implementation of surveillance systems

Challenges of Integrating NASA's Space Communications Networks

Science.gov (United States)

Reinert, Jessica; Barnes, Patrick

2013-01-01

The transition to new technology, innovative ideas, and resistance to change is something that every industry experiences. Recent examples of this shift are changing to using robots in the assembly line construction of automobiles or the increasing use of robotics for medical procedures. Most often this is done with cost-reduction in mind, though ease of use for the customer is also a driver. All industries experience the push to increase efficiency of their systems; National Aeronautics and Space Administration (NASA) and the commercial space industry are no different. NASA space communication services are provided by three separately designed, developed, maintained, and operated communications networks known as the Deep Space Network (DSN), Near Earth Network (NEN) and Space Network (SN). The Space Communications and Navigation (SCaN) Program is pursuing integration of these networks and has performed a variety of architecture trade studies to determine what integration options would be the most effective in achieving a unified user mission support organization, and increase the use of common operational equipment and processes. The integration of multiple, legacy organizations and existing systems has challenges ranging from technical to cultural. The existing networks are the progeny of the very first communication and tracking capabilities implemented by NASA and the Jet Propulsion Laboratory (JPL) more than 50 years ago and have been customized to the needs of their respective user mission base. The technical challenges to integrating the networks are many, though not impossible to overcome. The three distinct networks provide the same types of services, with customizable data rates, bandwidth, frequencies, and so forth. The differences across the networks have occurred in effort to satisfy their user missions' needs. Each new requirement has made the networks more unique and harder to integrate. The cultural challenges, however, have proven to be a

Challenges of Integrating NASAs Space Communication Networks

Science.gov (United States)

Reinert, Jessica M.; Barnes, Patrick

2013-01-01

The transition to new technology, innovative ideas, and resistance to change is something that every industry experiences. Recent examples of this shift are changing to using robots in the assembly line construction of automobiles or the increasing use of robotics for medical procedures. Most often this is done with cost-reduction in mind, though ease of use for the customer is also a driver. All industries experience the push to increase efficiency of their systems; National Aeronautics and Space Administration (NASA) and the commercial space industry are no different. NASA space communication services are provided by three separately designed, developed, maintained, and operated communications networks known as the Deep Space Network (DSN), Near Earth Network (NEN) and Space Network (SN). The Space Communications and Navigation (SCaN) Program is pursuing integration of these networks and has performed a variety of architecture trade studies to determine what integration options would be the most effective in achieving a unified user mission support organization, and increase the use of common operational equipment and processes. The integration of multiple, legacy organizations and existing systems has challenges ranging from technical to cultural. The existing networks are the progeny of the very first communication and tracking capabilities implemented by NASA and the Jet Propulsion Laboratory (JPL) more than 50 years ago and have been customized to the needs of their respective user mission base. The technical challenges to integrating the networks are many, though not impossible to overcome. The three distinct networks provide the same types of services, with customizable data rates, bandwidth, frequencies, and so forth. The differences across the networks have occurred in effort to satisfy their user missions' needs. Each new requirement has made the networks more unique and harder to integrate. The cultural challenges, however, have proven to be a

Utilization of a technical review group during a BWR owners group technical specification improvement study

International Nuclear Information System (INIS)

Hansell, H.F.; Moyer, D.P.

1986-01-01

A BWR Owners' Group Technical Specification Improvement (TSI) Committee was formed in late 1983. A primary goal of this Committee was to encourage the development of a probabilistic methodology for technical specification improvements which could be readily applied by utilities. The TSI Committee elected to hire a Contractor to develop and demonstrate a method. After the Contractor was selected and has started work, the committee decided to establish a Technical Review Group (TRG) to efficiently and effectively review the Contractor's analyses. The TRG met frequently with the Contractor as the analyses were being performed. These meetings were held at the Contractor's facility in order to allow direct contact between reviewers and individuals performing the work. The TRG was also involved with all major interactions with the NRC. The significance and merit of using a peer review group in this manner is the theme of this paper. In order to present a discussion of the significance and merit of the TRG, the activities are described. The summary of the analytical approach is provided to more full understand the TRG activities

Zero Energy Schools: The Challenges

Energy Technology Data Exchange (ETDEWEB)

Torcellini, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-29

School buildings have a lot of potential to achieve zero energy (ZE) in new construction as well as in retrofits. There are many examples of schools operating at ZE, and many technical resources available to guide school districts and their design and construction teams through the process. When school districts embark on the path to ZE, however, they often confront challenges related to processes and a perception that ZE buildings require 'new,' unconventional, and expensive technologies, materials, or equipment. Here are some of the challenges school districts and their design and construction teams commonly encounter, and the solutions they use to overcome them.

Security challenges in integration of a PHR-S into a standards based national EHR.

Science.gov (United States)

Mense, Alexander; Hoheiser Pförtner, Franz; Sauermann, Stefan

2014-01-01

Health related data provided by patients themselves is expected to play a major role in future healthcare. Data from personal health devices, vaccination records, health diaries or observations of daily living, for instance, is stored in personal health records (PHR) which are maintained by personal health record systems (PHR-S). Combining this information with medical records provided by healthcare providers in electronic health records (EHR) is one of the next steps towards "personal care". Austria currently sets up a nationwide EHR system that incorporates all healthcare providers and is technically based on international standards (IHE, HL7, OASIS, ...). Looking at the expected potential of merging PHR and EHR data it is worth to analyse integration approaches. Although knowing that an integration requires the coordination of processes, information models and technical architectures, this paper specifically focuses on security issues by evaluating general security requirements for a PHR-S (based on HL7 PHR-S FM), comparing them with the information security specifications for the Austrian's national EHR (based on ISO/IES 27000 series) and identifying the main challenges as well as possible approaches.

The CRC 20 years: An overview of some of the major achievements and remaining challenges.

Science.gov (United States)

Doek, Jaap E

2009-11-01

On 20 November 1989, the General Assembly of the United Nations adopted the Convention on the Rights of the Child (CRC). It entered into force on 2 September 1990 and has by now been ratified by 193 States, making the most universally ratified human rights treaty. This overview will present and discuss the impact of this treaty both at the international and the national level, an overview which necessarily has to be limited to some of the developments as a result of the implementation of the CRC. The first part of this paper will be devoted to the impact the CRC had and still has on the setting and development of the international agenda for the promotion and protection of the rights and welfare of children. Special attention will given to developments, achievements, and remaining challenges at the international level with regard to protection of children in armed conflict; prevention and the protection of children from sexual exploitation; and from all forms of violence. This will include some information on the impact of these international developments and actions at the national level, for example, in the area of legislation. The second part will focus on the impact at the national level. Given the wide scope of the CRC this part will be limited to some of the General Measures of Implementation (law reform, national programmes, and independent monitoring) and the General Principles (non-discrimination, best interest, right to be heard) of the CRC. This will be based on reports of States on the implementation of the CRC submitted to the CRC Committee and the Concluding Observations of this Committee and on a number of studies. The conclusion will provide remarks on poverty as one of the major remaining challenges for the implementation of children's rights.

Pillars of peace: The evolution of nuclear technical cooperation

International Nuclear Information System (INIS)

Cetto, A.M.

2003-01-01

The twentieth century witnessed unprecedented scientific and technological progress, unfortunately paralleled by the development of weapons of mass destruction. And with this progress came an incredible amount of responsibility for scientists and governments. The creation of the IAEA and its technical cooperation programme brought together scientists and governments to use nuclear technology for the 'peaceful pursuits of mankind'. The programme supports application of nuclear techniques to solve socio-economic and human development problems in areas as diverse as agriculture, health, natural resource management, and radiation protection. Fifty years after President Eisenhower's famous 'Atoms for Peace' speech, the IAEA technical cooperation programme provides more than $70 million worth of experts, training, and procurement services each year to approximately 75% of its 137 Member States. But as development budgets shrink, the programme is seeking to make more meaningful use of resources at hand (national capacities, regional resources, development partners and the voluntary Technical Cooperation Fund), targeting specific problems of Member States and partnering with other sustainable development organizations. At the same time, efforts continue to overcome the past legacy that necessitated the 'Atoms for Peace' proposal in the first place. Even as development challenges are addressed, the IAEA, its partners and governments face other challenges along the way, including public opinion for a technology that had a devastating global introduction

Annotated bibliography of structural equation modelling: technical work.

Science.gov (United States)

Austin, J T; Wolfle, L M

1991-05-01

Researchers must be familiar with a variety of source literature to facilitate the informed use of structural equation modelling. Knowledge can be acquired through the study of an expanding literature found in a diverse set of publishing forums. We propose that structural equation modelling publications can be roughly classified into two groups: (a) technical and (b) substantive applications. Technical materials focus on the procedures rather than substantive conclusions derived from applications. The focus of this article is the former category; included are foundational/major contributions, minor contributions, critical and evaluative reviews, integrations, simulations and computer applications, precursor and historical material, and pedagogical textbooks. After a brief introduction, we annotate 294 articles in the technical category dating back to Sewall Wright (1921).

Self trust, a major challenge for nuclear regulators

Energy Technology Data Exchange (ETDEWEB)

Eibenschutz, J. [National Nuclear Safety and Safeguards Commission (CNSN), Mexico City (Mexico)

2014-07-01

Self trust. The nuclear community and particularly nuclear regulators overreact to accidents, this has been the case with the three NPP major accidents. Lowering admissible radiation levels, for example, conveys the wrong message to politicians and the general public, and contributes to enhance mistrust towards nuclear. Industry as well as regulators should mature and act with self respect, since the scientific bases of regulation are very solid and should be trusted. Lessons learned should be seriously pursued in spite of the 'uneven playing field'. Obviously safety continues as the main priority, but paranoid reactions from the nuclear professionals could destroy the future of nuclear power. (author)

Self trust, a major challenge for nuclear regulators

International Nuclear Information System (INIS)

Eibenschutz, J.

2014-01-01

Self trust. The nuclear community and particularly nuclear regulators overreact to accidents, this has been the case with the three NPP major accidents. Lowering admissible radiation levels, for example, conveys the wrong message to politicians and the general public, and contributes to enhance mistrust towards nuclear. Industry as well as regulators should mature and act with self respect, since the scientific bases of regulation are very solid and should be trusted. Lessons learned should be seriously pursued in spite of the 'uneven playing field'. Obviously safety continues as the main priority, but paranoid reactions from the nuclear professionals could destroy the future of nuclear power. (author)

An analysis of the technical status of high level radioactive waste and spent fuel management systems

Science.gov (United States)

English, T.; Miller, C.; Bullard, E.; Campbell, R.; Chockie, A.; Divita, E.; Douthitt, C.; Edelson, E.; Lees, L.

1977-01-01

The technical status of the old U.S. mailine program for high level radioactive nuclear waste management, and the newly-developing program for disposal of unreprocessed spent fuel was assessed. The method of long term containment for both of these waste forms is considered to be deep geologic isolation in bedded salt. Each major component of both waste management systems is analyzed in terms of its scientific feasibility, technical achievability and engineering achievability. The resulting matrix leads to a systematic identification of major unresolved technical or scientific questions and/or gaps in these programs.

Technical bases for estimating fission product behavior during LWR accidents. Technical report

International Nuclear Information System (INIS)

1981-06-01

The objective of this report is to provide the Nuclear Regulatory Commission and the public with a description of the best technical information currently available for estimating the release of radioactive material during postulated reactor accidents, and to identify where gaps exist in our knowledge. This report focuses on those low probability-high consequence accidents involving severe damage to the reactor core and core meltdown that dominate the risk to the public. Furthermore, in this report particular emphasis is placed on the accident behavior of radioactive iodine, as (1) radioiodine is predicted to be a major contributor to public exposure, (2) current regulatory accident analysis procedures focus on iodine, and (3) several technical issues have been raised recently about the magnitude of iodine release. The generation, transport, and attenuation of aerosols were also investigated in some detail to assess their effect on fission product release estimates and to determine the performance of engineered safety features under accident conditions exceeding their design bases

International Approaches for Nuclear Waste Disposal in Geological Formations: Geological Challenges in Radioactive Waste Isolation—Fifth Worldwide Review

Energy Technology Data Exchange (ETDEWEB)

Faybishenko, Boris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Birkholzer, Jens [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sassani, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swift, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-04-26

The overall objective of the Fifth Worldwide Review (WWR-5) is to document the current state-of-the-art of major developments in a number of nations throughout the World pursuing geological disposal programs, and to summarize challenging problems and experience that have been obtained in siting, preparing and reviewing cases for the operational and long-term safety of proposed and operating nuclear waste repositories. The scope of the Review is to address current specific technical issues and challenges in safety case development along with the interplay of technical feasibility, siting, engineering design issues, and operational and post-closure safety. In particular, the chapters included in the report present the following types of information: the current status of the deep geological repository programs for high level nuclear waste and low- and intermediate level nuclear waste in each country, concepts of siting and radioactive waste and spent nuclear fuel management in different countries (with the emphasis of nuclear waste disposal under different climatic conditions and different geological formations), progress in repository site selection and site characterization, technology development, buffer/backfill materials studies and testing, support activities, programs, and projects, international cooperation, and future plans, as well as regulatory issues and transboundary problems.

A Socio-Technical Perspective on Repository Monitoring - 12229

Energy Technology Data Exchange (ETDEWEB)

Bergmans, Anne [University of Antwerp, Faculty of Political and Social Sciences, Sint-Jacobstraat 2, 2000 Antwerpen (Belgium); Elam, Mark; Sundqvist, Goeran [University of Gothenburg, Department of Sociology, Box 720, 40530 Gothenburg (Sweden); Simmons, Peter [University of East Anglia, School of Environmental Sciences, Norwich NR4 7TJ (United Kingdom)

2012-07-01

Monitoring geological repositories for high-activity radioactive wastes has both technical and social dimensions, which are closely interrelated. To investigate the implications of this for geological disposal, data on experts' expectations of repository monitoring and the functions that it is expected to serve were analysed. The analysis drew on strategic and technical documents on monitoring produced by national agencies and by international organisations or projects; interviews with specialists in radioactive waste management organisations on monitoring and on their perceptions of societal concerns and expectations; and observations from technical workshops on repository monitoring. Three main rationales for monitoring were found: performance confirmation; decision support in a step-wise process; and public and stakeholder confidence building. The expectation that monitoring will enhance public confidence is then examined from a social scientific perspective and the potential for and challenges to using monitoring in this way are reviewed. In conclusion, implications for stakeholder engagement in the development of monitoring objectives and strategies are discussed. (authors)

Results from Consultancy Meeting on Qualified Technical Centres

International Nuclear Information System (INIS)

Novakovic, Mladen

2017-01-01

Qualified Technical Centres (QTC) - Current Situation: •Many Member States (MS) need help dealing with DSRS; •Most seek assistance, which can include funding, through the IAEA; •Technical assistance is provided by various governmental organization and private companies (service providers = SP). QTC - Method of Delivery Numerous MS requests are pressing the IAEA’s capacity to assist: •Use qualified internal and external experts/contractors; •Limited pool for DSRS and need to expand; •Dedicated and specialized equipment; •Mobile hot cell; •Mobile tool kit; •Field operations; •Coordinated approach with Nuclear Security and Safety. Qualified Technical Centres for the Management of DSRS: •The challenge is to scale up the support for safe and secure management of DSRS; •Strengthen existing capacity of some MS to support others and make support more sustainable; •Expands the support that can be readily provided and meet the many needs of MS

Non-technical skills of surgical trainees and experienced surgeons.

Science.gov (United States)

Gostlow, H; Marlow, N; Thomas, M J W; Hewett, P J; Kiermeier, A; Babidge, W; Altree, M; Pena, G; Maddern, G

2017-05-01

In addition to technical expertise, surgical competence requires effective non-technical skills to ensure patient safety and maintenance of standards. Recently the Royal Australasian College of Surgeons implemented a new Surgical Education and Training (SET) curriculum that incorporated non-technical skills considered essential for a competent surgeon. This study sought to compare the non-technical skills of experienced surgeons who completed their training before the introduction of SET with the non-technical skills of more recent trainees. Surgical trainees and experienced surgeons undertook a simulated scenario designed to challenge their non-technical skills. Scenarios were video recorded and participants were assessed using the Non-Technical Skills for Surgeons (NOTSS) scoring system. Participants were divided into subgroups according to years of experience and their NOTSS scores were compared. For most NOTSS elements, mean scores increased initially, peaking around the time of Fellowship, before decreasing roughly linearly over time. There was a significant downward trend in score with increasing years since being awarded Fellowship for six of the 12 NOTSS elements: considering options (score -0·015 units per year), implementing and reviewing decisions (-0·020 per year), establishing a shared understanding (-0·014 per year), setting and maintaining standards (-0·024 per year), supporting others (-0·031 per year) and coping with pressure (-0·015 per year). The drop in NOTSS score was unexpected and highlights that even experienced surgeons are not immune to deficiencies in non-technical skills. Consideration should be given to continuing professional development programmes focusing on non-technical skills, regardless of the level of professional experience. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

Prototype design for a predictive model to improve evacuation operations : technical report.

Science.gov (United States)

2011-08-01

Mass evacuations of the Texas Gulf Coast remain a difficult challenge. These events are massive in scale, : highly complex, and entail an intricate, ever-changing conglomeration of technical and jurisdictional issues. : This project focused primarily...

Technical note - Considerations for MR imaging of small animals

International Nuclear Information System (INIS)

Baker, Martin A.

2011-01-01

Routine clinical veterinary use of MR scanning is becoming more common. This article addresses the major technical considerations for radiographers performing MR examinations on small animals and provides practical advice for scanning techniques.

2010 Panel on the Biomaterials Grand Challenges

Science.gov (United States)

Reichert, William “Monty”; Ratner, Buddy D.; Anderson, James; Coury, Art; Hoffman, Allan S.; Laurencin, Cato T.; Tirrell, David

2014-01-01

In 2009, the National Academy for Engineering issued the Grand Challenges for Engineering in the 21st Century comprised of 14 technical challenges that must be addressed to build a healthy, profitable, sustainable, and secure global community (http://www.engineeringchallenges.org). Although crucial, none of the NEA Grand Challenges adequately addressed the challenges that face the biomaterials community. In response to the NAE Grand Challenges, Monty Reichert of Duke University organized a panel entitled Grand Challenges in Biomaterials at the at the 2010 Society for Biomaterials Annual Meeting in Seattle. Six members of the National Academies—Buddy Ratner, James Anderson, Allan Hoffman, Art Coury, Cato Laurencin, and David Tirrell—were asked to propose a grand challenge to the audience that, if met, would significantly impact the future of biomaterials and medical devices. Successfully meeting these challenges will speed the 60-plus year transition from commodity, off-the-shelf biomaterials to bioengineered chemistries, and biomaterial devices that will significantly advance our ability to address patient needs and also to create new market opportunities. PMID:21171147

Opportunities and Challenges in Deep Mining: A Brief Review

Directory of Open Access Journals (Sweden)

Pathegama G. Ranjith

2017-08-01

Full Text Available Mineral consumption is increasing rapidly as more consumers enter the market for minerals and as the global standard of living increases. As a result, underground mining continues to progress to deeper levels in order to tackle the mineral supply crisis in the 21st century. However, deep mining occurs in a very technical and challenging environment, in which significant innovative solutions and best practice are required and additional safety standards must be implemented in order to overcome the challenges and reap huge economic gains. These challenges include the catastrophic events that are often met in deep mining engineering: rockbursts, gas outbursts, high in situ and redistributed stresses, large deformation, squeezing and creeping rocks, and high temperature. This review paper presents the current global status of deep mining and highlights some of the newest technological achievements and opportunities associated with rock mechanics and geotechnical engineering in deep mining. Of the various technical achievements, unmanned working-faces and unmanned mines based on fully automated mining and mineral extraction processes have become important fields in the 21st century.

PREFACE: Conceptual and Technical Challenges for Quantum Gravity 2014 - Parallel session: Noncommutative Geometry and Quantum Gravity

Science.gov (United States)

Martinetti, P.; Wallet, J.-C.; Amelino-Camelia, G.

2015-08-01

The conference Conceptual and Technical Challenges for Quantum Gravity at Sapienza University of Rome, from 8 to 12 September 2014, has provided a beautiful opportunity for an encounter between different approaches and different perspectives on the quantum-gravity problem. It contributed to a higher level of shared knowledge among the quantum-gravity communities pursuing each specific research program. There were plenary talks on many different approaches, including in particular string theory, loop quantum gravity, spacetime noncommutativity, causal dynamical triangulations, asymptotic safety and causal sets. Contributions from the perspective of philosophy of science were also welcomed. In addition several parallel sessions were organized. The present volume collects contributions from the Noncommutative Geometry and Quantum Gravity parallel session4, with additional invited contributions from specialists in the field. Noncommutative geometry in its many incarnations appears at the crossroad of many researches in theoretical and mathematical physics: • from models of quantum space-time (with or without breaking of Lorentz symmetry) to loop gravity and string theory, • from early considerations on UV-divergencies in quantum field theory to recent models of gauge theories on noncommutative spacetime, • from Connes description of the standard model of elementary particles to recent Pati-Salam like extensions. This volume provides an overview of these various topics, interesting for the specialist as well as accessible to the newcomer. 4partially funded by CNRS PEPS /PTI ''Metric aspect of noncommutative geometry: from Monge to Higgs''

Single-stage-to-orbit — Meeting the challenge

Science.gov (United States)

Freeman, Delma C.; Talay, Theodore A.; Austin, Robert Eugene

1996-02-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

HUMAN CAPITAL: Major Human Capital Challenges at SEC and Key Trade Agencies

National Research Council Canada - National Science Library

Hillman, Richard

2002-01-01

.... The leadership provided by this subcommittee and the Senate Committee on Governmental Affairs has been especially important in focusing attention on the federal government s human capital challenges.

Revisiting the utility of technical performance scores following tetralogy of Fallot repair.

Science.gov (United States)

Lodin, Daud; Mavrothalassitis, Orestes; Haberer, Kim; Sunderji, Sherzana; Quek, Ruben G W; Peyvandi, Shabnam; Moon-Grady, Anita; Karamlou, Tara

2017-08-01

Although an important quality metric, current technical performance scores may not be generalizable and may omit operative factors that influence outcomes. We examined factors not included in current technical performance scores that may contribute to increased postoperative length of stay, major complications, and cost after primary repair of tetralogy of Fallot. This is a retrospective single site study of patients younger than age 2 years with tetralogy of Fallot undergoing complete repair between 2007 and 2015. Medical record data and discharge echocardiograms were reviewed to ascertain component and composite technical performance scores. Primary outcomes included postoperative length of stay, major complications, and total hospital costs. Multivariable logistic and linear regression identified determinants of each outcome. Patient population (n = 115) had a median postoperative length of stay of 8 days (interquartile range, 6-10 days), and a median total cost of $71,147. Major complications occurred in 33 patients (29%) with 1 death. Technical performance scores assigned were optimum in 28 patients (25%), adequate in 59 patients (52%), and inadequate in 26 patients (23%). Neither technical performance score components nor composite scores were associated with increased postoperative length of stay. Optimum or adequate repairs versus inadequate had equal risk of a complication (P = .79), and equivalent mean total cost ($100,000 vs $187,000; P = .25). Longer cardiopulmonary bypass time per 1-minute increase (P technical performance scores were not associated with selected outcomes in our postoperative population. Although returning to bypass and bypass length are not included as components in the current score, these are important factors influencing complications and resource use in our population. Revisions anticipated from a prospective trial should consider including these variables. Copyright © 2017 The American Association for Thoracic Surgery

Challenge theme 6: Natural hazard risks in the Borderlands: Chapter 8 in United States-Mexican Borderlands: Facing tomorrow's challenges through USGS science

Science.gov (United States)

Page, William R.; Parcher, Jean W.; Stefanov, Jim

2013-01-01

Natural hazards such as earthquakes, landslides and debris flows, wildfires, hurricanes, and intense storm-induced flash floods threaten communities to varying degrees all along the United States–Mexican border. The U.S. Geological Survey (USGS) collaborates with Federal, State, and local agencies to minimize the effects of natural hazards by providing timely, unbiased science information to emergency response officials, resource managers, and the public to help reduce property damage, injury, and loss of life. The USGS often mobilizes response efforts during and after a natural hazard event to provide technical and scientific counsel on recovery and response, and it has a long history of deploying emergency response teams to major disasters in both domestic and international locations. This chapter describes the challenges of natural hazards in the United States–Mexican border region and the capabilities of the USGS in the fields of hazard research, monitoring, and assessment, as well as preventative mitigation and post-disaster response.

Tertiary Technical Education and Youth Integration in Brazil, Colombia and Mexico

Directory of Open Access Journals (Sweden)

Claudia Jacinto

2014-11-01

Full Text Available Vocational training versus a traditional university education. This chapter seeks to answer the question of whether ‘tertiary technical education’ has contributed to increasing economic and social opportunity for young people in Latin America, using three case studies from Brazil, Colombia and Mexico. It examines the extent to which tertiary technical education has contributed towards democratising access to education through institutional diversification, expanded enrolment and, at least theoretically, improved access to quality employment. The analysis shows that tertiary technical education has contributed to widening of opportunities by offering an alternative form of education to new generations of young people. Tertiary technical education is more accessible, shorter in duration, has a vocational orientation, and tends to be cheaper than a university education. However, the case studies also reveal that while a tertiary technical education diploma is an asset for young people seeking employment, it nonetheless does not have the same perceived value as a traditional university education. Available data appear to indicate that graduates of tertiary technical education earn less on average than university graduates and face several challenges in the labour market. Furthermore, the studies reveal that despite the presence of highly regarded tertiary technical education institutions in all three countries, these carry less prestige and status than universities.

Capacity Building Imperatives for Developing Science, Technical ...

African Journals Online (AJOL)

... of white-collar jobs, and lack of productive skills for self-employment among graduates. The educational system at that time could not solve the mounting national problem. This was the major purpose why the National Policy on Education was launched in 1977 with great emphasis on Vocational and Technical education ...

Investigating Challenges Facing Self-Management Empowerment Education in Adolescents and Youths with Major Thalassemia

Directory of Open Access Journals (Sweden)

Razzazan

2014-10-01

Full Text Available Background Thalassemia is considered an important public health problem worldwide, especially in developing and poor countries. Although several advanced techniques have been developed for prevention of thalassemia in the recent years, many adolescents and youths are still living with this disease. Independence from parents, decisions about high-risk behaviors, uncovering the identity, and adapting to mental and physical effects of the disease occur together in adolescents. Objectives This study was conducted to explore challenges of self-management empowerment in adolescents and youths with major thalassemia. Materials and Methods This was a descriptive-exploratory study. The study population consisted of adolescents and youths with major thalassemia who had medical records in the Bushehr Thalassemia Center, affiliated with Bushehr University of Medical Sciences. The study samples were purposively selected. Demographic information questionnaire and empowerment questionnaire were used to collect data from the semistructured interview. We analyzed qualitative data by content analysis method and quantitative data by descriptive (mean, standard deviation and analytical (Student's t-test, ANOVA and Pearson’s correlation coefficient statistical methods, using the statistical software SPSS 18. Results In qualitative part of the study, data from semistructured in-depth interviews with 15 participants were coded and summarized in five themes including: 1 awareness of personal changes; 2 need for adaptation; 3 maintaining independence and self-management; 4 uncovering the identity and role playing; and 5 sense of control and satisfaction. Results of the quantitative part showed that the overall score of participants on empowerment was 92.46 of 149 scores, which showed a moderate situation in the empowerment of these individuals. In addition, the empowerment score showed no statistically significant correlation with demographic characteristics

ESP AS A CHALLENGE TO CONFRONT – A CASE STUDY OF TECHNICAL ENGLISH IN A PRE-INTERMEDIATE LEVEL UNIVERSITY CLASSROOM

Directory of Open Access Journals (Sweden)

LUSTIGOVÁ, Lenka

2013-12-01

Full Text Available Drowned in explosive amounts of information, new technology developments, globalisation, international job opportunities and large-scale job migration, ESP courses are faced with the increasing requirement of tailoring language-learning to accommodate employer/employee specialisations. This dynamism is currently being transmitted to courses at the university level, along with the accompanying challenges for all involved. This paper reviews these potential barriers to implementation of ESP courses for students with low proficiency of English, taking a pre-intermediate-level Technical English course at the Czech University of Life Sciences Prague as a case study. After analysing various scholarly references aimed at ESP, the classroom-based research for this paper confirms the feasibility and efficacy of implementing ESP and TE, in particular, even into pre-intermediate classrooms. The self-motivating design of 6 TASKS, as well as authentic video sessions, combined with a student survey and teacher observations, all serve to point to ESP introduction on the pre-intermediate level as achievable in terms of application and resourceful regarding future life-career situations in which students will eventually find themselves.

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the Atmospheric Environment Safety Technology Project

Science.gov (United States)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This study analyzed aircraft incidents in the NASA Aviation Safety Reporting System (ASRS) that apply to two of the three technical challenges (TCs) in NASA's Aviation Safety Program's Atmospheric Environment Safety Technology Project. The aircraft incidents are related to airframe icing and atmospheric hazards TCs. The study reviewed incidents that listed their primary problem as weather or environment-nonweather between 1994 and 2011 for aircraft defined by Federal Aviation Regulations (FAR) Parts 121, 135, and 91. The study investigated the phases of flight, a variety of anomalies, flight conditions, and incidents by FAR part, along with other categories. The first part of the analysis focused on airframe-icing-related incidents and found 275 incidents out of 3526 weather-related incidents over the 18-yr period. The second portion of the study focused on atmospheric hazards and found 4647 incidents over the same time period. Atmospheric hazards-related incidents included a range of conditions from clear air turbulence and wake vortex, to controlled flight toward terrain, ground encounters, and incursions.

Identification of technical problems encountered in the shallow land burial of low-level radioactive wastes

International Nuclear Information System (INIS)

Jacobs, D.G.; Epler, J.S.; Rose, R.R.

1980-03-01

A review of problems encountered in the shallow land burial of low-level radioactive wastes has been made in support of the technical aspects of the National Low-Level Waste (LLW) Management Research and Development Program being administered by the Low-Level Waste Management Program Office, Oak Ridge National Laboratory. The operating histories of burial sites at six major DOE and five commercial facilities in the US have been examined and several major problems identified. The problems experienced st the sites have been grouped into general categories dealing with site development, waste characterization, operation, and performance evaluation. Based on this grouping of the problem, a number of major technical issues have been identified which should be incorporated into program plans for further research and development. For each technical issue a discussion is presented relating the issue to a particular problem, identifying some recent or current related research, and suggesting further work necessary for resolving the issue. Major technical issues which have been identified include the need for improved water management, further understanding of the effect of chemical and physical parameters on radionuclide migration, more comprehensive waste records, improved programs for performance monitoring and evaluation, development of better predictive capabilities, evaluation of space utilization, and improved management control

Identification of technical problems encountered in the shallow land burial of low-level radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Jacobs, D.G.; Epler, J.S.; Rose, R.R.

1980-03-01

A review of problems encountered in the shallow land burial of low-level radioactive wastes has been made in support of the technical aspects of the National Low-Level Waste (LLW) Management Research and Development Program being administered by the Low-Level Waste Management Program Office, Oak Ridge National Laboratory. The operating histories of burial sites at six major DOE and five commercial facilities in the US have been examined and several major problems identified. The problems experienced st the sites have been grouped into general categories dealing with site development, waste characterization, operation, and performance evaluation. Based on this grouping of the problem, a number of major technical issues have been identified which should be incorporated into program plans for further research and development. For each technical issue a discussion is presented relating the issue to a particular problem, identifying some recent or current related research, and suggesting further work necessary for resolving the issue. Major technical issues which have been identified include the need for improved water management, further understanding of the effect of chemical and physical parameters on radionuclide migration, more comprehensive waste records, improved programs for performance monitoring and evaluation, development of better predictive capabilities, evaluation of space utilization, and improved management control.

Globalization, Critical Post-Colonialism and Career and Technical Education in Africa: Challenges and Possibilities

Science.gov (United States)

Goura, Tairou

2012-01-01

In Sub-Saharan Africa (SSA), technical and vocational education and training (TVET) is central to political discourses and educational concerns as a means for economic development, poverty alleviation, youth employment, and social mobility. Yet, there is an intriguing contradiction between this consideration and the real attention dedicated to…

[Improving treatment adherence in kidney transplantation: a major challenge].

Science.gov (United States)

Kessler, Michèle

2014-06-01

The kidney transplant recipient is faced not only with the perspective of taking immunosuppressive drugs lifelong, but also the possibility of other long-term treatments prescribed for preexisting conditions, complications, or side effects. Proper management, and most importantly patient adherence, can become a complex challenge. Here we recall current definitions and describe methods for measuring treatment adherence, followed by a discussion on the prevalence of non-adherence in kidney transplant recipients, its effect on graft survival, and factors predictive of non-adherence. Ways of improving adherence are examined, leading to the conviction that helping patients take their medications regularly would probably have a greater impact on graft survival than marketing a new immunosuppressive agent. Copyright © 2014 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

Ensuring energy security in ASEAN countries: Current trends and major challenges

Science.gov (United States)

Senderov, Sergey; Vorobev, Sergey

2018-01-01

The paper discusses the issues of formation of future challenges to energy security of the ASEAN countries in the period up to 2035. The article gives examples of strategic threats to the energy security of Russia. The opportunities to meet future demand for primary energy for individual countries of ASEAN and the whole region are discussed.

Wearable devices for blood purification: principles, miniaturization, and technical challenges.

Science.gov (United States)

Armignacco, Paolo; Lorenzin, Anna; Neri, Mauro; Nalesso, Federico; Garzotto, Francesco; Ronco, Claudio

2015-01-01

The prevalences of end-stage renal disease (ESRD) and renal replacement therapy (RRT) continue to increase across the world imposing staggering costs on providers. Therefore, strategies to optimize the treatment and improve survival are of fundamental importance. Despite the benefits of daily dialysis, its implementation is difficult and wearable hemodialysis might represent an alternative by which frequent treatments can be delivered to ESRD patients with much less interference in their routines promoting better quality of life. The development of the wearable artificial kidney (WAK) requires incorporation of basic components of a dialysis system into a wearable device that allows mobility, miniaturization, and above all, patient-oriented management. The technical requirements necessary for WAK can be divided into the following broad categories: dialysis membranes, dialysis regeneration, vascular access, patient monitoring systems, and power sources. Pumping systems for blood and other fluids are the most critical components of the entire device. © 2015 Wiley Periodicals, Inc.

Parliamentarian sovereignty and technical development

International Nuclear Information System (INIS)

Dreier, H.; Hofmann, J.

1986-01-01

The title indicates the points of main emphasis of the contributions, and points to the programme embodied in the volume. The question is - given the tremendous and ever increasing amount of secondary problems associated with a heated technology development - whether the 'sovereign' state is at all capable of controlling, piloting and fostering technic-scientific processes. The first part ('sovereignty and parliamentarian legislator state') concentrates on the history of notions and ideas in the concept of the sovereign, modern state, and on the constitutional law in force (Dreier, Frohn); the current efficiency of parliament as an organ of control in the process of legislation is investigated (Schulze-Fielitz). The central concern of part 2 ('environmental law and technical development') are topical questions of environmental law (Hofmann, Luebbe-Wolff). Besides the analysis of dogmatic problems of a special administrative law, the major issue is whether and in how far - given modern large-scale technologies - law can adequately govern technique (Schmidt). By analyzing the relationship between technical development and possibilities for guidance by a parliamentarian constitutional state, the articles deal with a central point of intersection between state and administrative law. (orig./HP) [de

HUMAN CAPITAL: Major Human Capital Challenges at SEC and Key Trade Agencies

National Research Council Canada - National Science Library

Hillman, Richard

2002-01-01

We appreciate the opportunity to appear here today to discuss the human capital challenges facing the agencies that play key roles in monitoring publicly traded companies and enforcing our nation's trade laws...

Software configuration management plan for the Hanford site technical database

International Nuclear Information System (INIS)

GRAVES, N.J.

1999-01-01

The Hanford Site Technical Database (HSTD) is used as the repository/source for the technical requirements baseline and programmatic data input via the Hanford Site and major Hanford Project Systems Engineering (SE) activities. The Hanford Site SE effort has created an integrated technical baseline for the Hanford Site that supports SE processes at the Site and project levels which is captured in the HSTD. The HSTD has been implemented in Ascent Logic Corporation (ALC) Commercial Off-The-Shelf (COTS) package referred to as the Requirements Driven Design (RDD) software. This Software Configuration Management Plan (SCMP) provides a process and means to control and manage software upgrades to the HSTD system

Challenges in commercializing biomimetic membranes

DEFF Research Database (Denmark)

Perry, Mark; Madsen, Steen Ulrik; Jørgensen, Tine Elkjær

2015-01-01

category includes customer-related barriers, which can be influenced to some extent. Another category includes market-technical-related barriers, which can be very difficult to overcome by an organization/company aiming at successfully introducing their innovation on the market—in particular if both...... the organization and the technology are at early stages. Often, one faces barriers from both these categories at the same time, which makes it necessary to gain insight of the particular market when introducing a new innovative product. In this review we present the basic concepts and discuss some...... of these barriers and challenges associated with introducing biomimetic aquaporin membranes. These include technical issues in membrane production and product testing. Then we discuss possible business models for introducing new technologies in general, followed by a presentation of beach-head market segments...

Major Oil Plays in Utah and Vicinity. Quarterly Technical Progress Report

International Nuclear Information System (INIS)

Thomas C. Chidsey; Craig D. Morgan; Kevin McClure; Douglas A. Sprinkel; Roger L. Bon; Hellmut H. Doelling

2003-01-01

Utah oil fields have produced over 1.2 billion barrels (191 million m 3 ). However, the 13.7 million barrels (2.2 million m 3 ) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil-producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; locations of major oil pipelines; identification and discussion of land-use constraints; descriptions of reservoir outcrop analogs; and summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play. This report covers research activities for the sixth quarter of the project (October 1 through December 31, 2003). This work included describing outcrop analogs for the Jurassic Twin Creek Limestone and Mississippian Leadville Limestone, major oil producers in the thrust belt and Paradox Basin, respectively, and analyzing best practices used in the southern Green River Formation play of the Uinta Basin. Production-scale outcrop analogs provide an excellent view of reservoir petrophysics, facies characteristics, and boundaries contributing to the overall heterogeneity of reservoir rocks. They can be used as a ''template'' for evaluation of data from conventional core, geophysical and petrophysical logs, and seismic surveys. In the Utah/Wyoming thrust belt province, the Jurassic Twin Creek Limestone produces from subsidiary closures along major ramp anticlines where the low-porosity limestone beds are extensively fractured and sealed by

Endogeneity Corrected Stochastic Production Frontier and Technical Efficiency

NARCIS (Netherlands)

Shee, A.; Stefanou, S.E.

2015-01-01

A major econometric issue in estimating production parameters and technical efficiency is the possibility that some forces influencing production are only observed by the firm and not by the econometrician. Not only can this misspecification lead to a biased inference on the output elasticity of

Getting on the Balcony: Leadership Challenges in Regulation

Energy Technology Data Exchange (ETDEWEB)

Jamison, Mark A.; Rowe, Robert; Perlman, Brett A.

2005-12-01

'Technical' solutions of the sort that policymakers traditionally implement may not be properly addressing some tricky public policy issues. Policymakers should recognize that these issues frequently raise 'adaptive' challenges - situations that cannot be adequately addressed without rethinking underlying beliefs, values, and traditions.

Opportunities and challenges working in the former Soviet Union

International Nuclear Information System (INIS)

Gueritte, C.

1992-01-01

The recent opening up of the Commonwealth of Independent States (CIS) to foreign companies has provided oil and gas companies with the opportunity to enter into business relationships with CIS partners to develop that region's vast hydrocarbon resources. The CIS is experiencing a decline in production due to major declines in output from the giant oil fields, lack of equipment and technology, limited exploration investment, environmental problems, inadequate pricing structures, and social instability. Gas production, although rising up to the end of 1990, is threatened by emergence of technological problems in maintaining productivity of the main gas fields. The challenges for carrying out business in the CIS are outlined, including technical aspects, business mentality, economic approach, political organization, legal and fiscal stability, and financing. Experiences in operating in the CIS are illustrated from the viewpoint of the French company Total Exploration and Production, which is engaged in enhanced recovery operations and development of fields in joint ventures. 5 figs., 2 tabs

Challenges in paediatric neurosurgery

Directory of Open Access Journals (Sweden)

Pragati Ganjoo

2017-01-01

Full Text Available Improvements in technique, knowledge and expertise have brought about rapid advances in the fields of paediatric neurosurgery and anaesthesia, and many procedures limited earlier to adults are now being increasingly attempted in neonates and small children, with good outcomes. This article highlights the challenges faced by the operating team while handling some of the technically complex procedures like awake craniotomy, interventional neuroradiology, minimally invasive neurosurgery, procedures in intraoperative magnetic resonance imaging suites, and neonatal emergencies in the paediatric population.

Developing e-banking services for rural India: making use of socio-technical prototypes

DEFF Research Database (Denmark)

Dittrich, Yvonne; Vaidyanathan, Lakshmi; Gonsalves, Timothy A

2017-01-01

an experience report based on systematic debriefing of involved project leaders and initiators, triangulated with additional documentation. The concept of Socio-Technical Prototype is developed and used to show how to mitigate the challenges of ICT based banking service provision for socially constrained...... communities. The concept of Socio-Technical Prototype extends the notion of prototypes, as it implies a full functioning implementation of the service including all relevant stakeholders. In order to not only prototype end-user functionality but also the interaction of the solution with the specific social......, technical and physical environment. The implications for software engineering in the development of such large-scale prototypes and pilots are outlined....

Scale challenges of the MeerKAT Radio Telescope

CERN Multimedia

CERN. Geneva; Ratcliffe, Simon

2017-01-01

A discussion on the MeerKAT Radio Telescope, currently nearing completion in the Karoo desert region of South Africa. This talk covers a quick introduction to radio astronomy data processing and the scale challenges inherent therein. The solutions to the challenges posed will be discussed, including coverage of our MESOS based execution framework and the role of the various data storage regimes in our processing and analysis pipelines. The final third will highlight our multiple uses of CEPH, including our self-build hardware, 20PB science archive. About the speakers Simon Ratcliffe has a background in astrophysics and computer science, and is currently the technical lead for scientific computing at SKA South Africa. In this role he oversees the architecture and technical direction of the science processor for the MeerKAT radio telescope. Thomas Bennett has a masters degree in electronic engineering and is currently a developer in the scientific computing as SKA South Africa. In this role he overs...

Pediatric hearing aid use: parent-reported challenges.

Science.gov (United States)

Muñoz, Karen; Olson, Whitney A; Twohig, Michael P; Preston, Elizabeth; Blaiser, Kristina; White, Karl R

2015-01-01

troubleshoot hearing aid problems. More than half of the parents reported child behavior and activities, such as playing outside, as a major hearing aid use challenge. Parents reported hearing aids were worn all waking hours by 35% of children and less than 5 hr/day by 31%. Almost half of the parents (47%) did not feel that they had enough time to talk about their emotions when speaking with their audiologist(s), 69% reported the audiologist did not help them know what to expect related to emotions about their child's hearing loss, and 22% reported symptoms of depression. Parents reported an array of challenges, even after their child had been wearing hearing aids for a prolonged time, revealing critical implications for how to provide audiological care. Audiologists have an important role in partnering with parents to identify and jointly problem-solving challenges related to their child's hearing aid use. Supporting parents includes not only addressing technical aspects of hearing testing and hearing aid function but also addressing parent thoughts, feelings, and emotions.

Technical co-operation report for 2000. Report by the Director General

International Nuclear Information System (INIS)

2001-01-01

This report covers three separate topics. Part one fulfills the Agency's obligation under the General Conference resolution GC(44)/RES/18 to report on the Strengthening of Technical Co-operation. It covers the period from 1 April 2000 to 31 March 2001. The report examines the finalization of the 2001-2002 technical co-operation programme and several key concepts of the Technical Co-operation Strategy such as Partners in Development, Technical Co-operation among Developing Countries, and the continuing evolution of Regional Resource Centres. Reflecting an important trend in the technical co-operation programme, which was mandated by the General Conference, the report describes the results achieved in several programmes in least developed countries. Part two reports on the major achievements of the technical co-operation programme in 2000 in the different regions of the world. Part three presents a summary of the financial and non-financial parameters of the technical co-operation programme. The supplement to the report provides a more detailed review of resources and contributions, disbursements and non-financial indicators

Technical co-operation report for 2000. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This report covers three separate topics. Part one fulfills the Agency's obligation under the General Conference resolution GC(44)/RES/18 to report on the Strengthening of Technical Co-operation. It covers the period from 1 April 2000 to 31 March 2001. The report examines the finalization of the 2001-2002 technical co-operation programme and several key concepts of the Technical Co-operation Strategy such as Partners in Development, Technical Co-operation among Developing Countries, and the continuing evolution of Regional Resource Centres. Reflecting an important trend in the technical co-operation programme, which was mandated by the General Conference, the report describes the results achieved in several programmes in least developed countries. Part two reports on the major achievements of the technical co-operation programme in 2000 in the different regions of the world. Part three presents a summary of the financial and non-financial parameters of the technical co-operation programme. The supplement to the report provides a more detailed review of resources and contributions, disbursements and non-financial indicators.

Major projects for the use of high power linacs

International Nuclear Information System (INIS)

Prome, M.

1996-01-01

A review of the major projects for high power linacs is given. The field covers the projects aiming at the transmutation of nuclear waste or the production of tritium, as well as the production of neutrons for hybrid reactors or basic research with neutron sources. The technologies which arc common to all the projects are discussed. Comments are made on the technical difficulties encountered by all the projects, and the special problems of the pulsed linacs are mentioned. Elements for a comparison of normal conducting linacs versus superconducting ones are given. Finally the technical developments being made in various laboratories are reviewed. (author)

Implementing geological disposal. A long-term governance challenge

Energy Technology Data Exchange (ETDEWEB)

Bergmans, Anne [Antwerp Univ. (Belgium). Faculty of Political and Social Sciences and Faculty of Law

2015-07-01

Calling geological disposal (GD) a technical and societal challenge and arguing that democratic decision-making on GD requires public and stakeholder engagement (PSE), are statements that will not meet much opposition. A process of 'governance' consists of engaging stakeholder groups in decision making processes and contrasts with more traditional, often technocratic forms of government. As will be argued in other papers in this conference (e.g. Grunwald; Kallenbach-Herbert et al.; Roehlig et al.) it is of fairly recent date, that concerned actors increasingly recognize that PSE should relate to both the societal and technical questions concerning GD. While most people would agree in theory, putting 'technical democracy' (Callon et al. 2001) in practice, often proofs to be less obvious. Opening up the technical 'black box' remains a crucial challenge in discussing the implications of GD for society and for the environment. As findings from the InSOTEC project show, this can be explained because different types of problematization occur, often considered as sequential, rather than intertwined (Barthe et al. 2014). Social problematization of GD, i.e. considering the remaining obstacles for implementation to be in essence social in nature, is often associated with the siting stage, when the technological project meets its social environment (ibidem). Formal participatory processes are often aimed mainly at dealing with socio-economic impacts and adapting life on the surface to the underground technology project, rather than the other way around (Bergmans et al. forthcoming). Still such interactions can, and have indeed proven to, lead to technical problematization, i.e. putting into question the technical project or certain aspects of it (cf. Barthe et al. 2014), by concerned stakeholders. As can be observed in the case of Sweden - for GD of spent fuel, and Belgium - for surface disposal of low- and intermediate level waste, this does not

Implementing geological disposal. A long-term governance challenge

International Nuclear Information System (INIS)

Bergmans, Anne

2015-01-01

Calling geological disposal (GD) a technical and societal challenge and arguing that democratic decision-making on GD requires public and stakeholder engagement (PSE), are statements that will not meet much opposition. A process of 'governance' consists of engaging stakeholder groups in decision making processes and contrasts with more traditional, often technocratic forms of government. As will be argued in other papers in this conference (e.g. Grunwald; Kallenbach-Herbert et al.; Roehlig et al.) it is of fairly recent date, that concerned actors increasingly recognize that PSE should relate to both the societal and technical questions concerning GD. While most people would agree in theory, putting 'technical democracy' (Callon et al. 2001) in practice, often proofs to be less obvious. Opening up the technical 'black box' remains a crucial challenge in discussing the implications of GD for society and for the environment. As findings from the InSOTEC project show, this can be explained because different types of problematization occur, often considered as sequential, rather than intertwined (Barthe et al. 2014). Social problematization of GD, i.e. considering the remaining obstacles for implementation to be in essence social in nature, is often associated with the siting stage, when the technological project meets its social environment (ibidem). Formal participatory processes are often aimed mainly at dealing with socio-economic impacts and adapting life on the surface to the underground technology project, rather than the other way around (Bergmans et al. forthcoming). Still such interactions can, and have indeed proven to, lead to technical problematization, i.e. putting into question the technical project or certain aspects of it (cf. Barthe et al. 2014), by concerned stakeholders. As can be observed in the case of Sweden - for GD of spent fuel, and Belgium - for surface disposal of low- and intermediate level waste, this does not

Technical approach to aging management

International Nuclear Information System (INIS)

Vora, J.P.; Johnson, A.B. Jr.; Allen, R.P.

1992-10-01

Systematic and effective control of age-related degradation of safety-related components, systems, and structures in nuclear power plants (NPPs) is an important challenge to plant operators. Several data bases, available to provide guidance on aging management, are summarized. However, the ultimate consideration is: How effectively is aging management being implemented at individual plants? Illustrated here is a specific strategy that served to develop the technical data base for the Nuclear Plant Aging Research Program. The strategy is comprehensive, systematic, and adaptable. Effective aging management at NPPs could be facilitated by a parallel strategy. The elements of a strategy are suggested

Technical assistance contractor Management Plan. Final [report

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins & Beckwith Agra, Inc. (SHB Agra), and Geraghty & Miller, Inc. (G&M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC`s groundwater technical breadth and depth, so G&M was brought in to augment the team`s capabilities. The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC`s management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls.

Practical boundary surveying legal and technical principles

CERN Document Server

Gay, Paul

2015-01-01

This guide to boundary surveying provides landowners, land surveyors, students and others with the necessary foundation to understand boundary surveying techniques and the common legal issues that govern boundary establishment.  Boundary surveying is sometimes mistakenly considered a strictly technical discipline with simple and straightforward technical solutions.  In reality, boundary establishment is often a difficult and complex matter, requiring years of experience and a thorough understanding of boundary law.  This book helps readers to understand the challenges often encountered by boundary surveyors and some of the available solutions. Using only simple and logically explained mathematics, the principles and practice of boundary surveying are demystified for those without prior experience, and the focused coverage of pivotal issues such as easements and setting lot corners will aid even licensed practitioners in untangling thorny cases. Practical advice on using both basic and advanced instruments ...

Promotion and co-ordination in Switzerland within the framework of the EU Motor Challenge Program - Final report; Promotion und Koordination in der Schweiz zum Motor Challenge Programm der EU - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Nipkow, J. [Arena, Zuerich (Switzerland); Tanner, R. [Semafor, Basel (Switzerland); Gloor, R. [Gloor Engineering, Sufers (Switzerland)

2008-07-01

The goal of the Motor Challenge Promotion project was to establish information on the European Motor Challenge Programme to users of electric motor driven systems, and to encourage them to start activities on energy efficient drives in their plants and sites. The promotion project served also as National Contact Point of the European Motor Challenge Programme in Switzerland and coordinated information transfer of national activities on drives efficiency. Dissemination of Motor Challenge information and know-how was achieved mainly by these means: Internet (www.motorchallenge.ch), electronic newsletter twice a year, articles in technical publications, presentations at events on energy efficiency and in training courses at technical universities. Communication with the EU-Motor Challenge Programme was provided by e-mail exchange and by attending conferences and workshops, e.g. EEMODS 2005 (Heidelberg), Motor Challenge Workshop 2007 (Paris). Queries and the attendance at information events showed a growing interest in efficiency of electric drives. The Swiss Motor Challenge team was involved in the preparation of the SwissEnergy implementation programme on drives efficiency. The Swiss agency for efficient energy use S.A.F.E. launched the programme named 'Topmotors' in autumn 2007. The Motor Challenge activities will pass over to Topmotors; the web site will be linked to www.topmotors.ch and a Topmotors newsletter will be launched. (author)

Career and Technical Education Teacher Shortage: A Successful Model for Recruitment and Retention

Science.gov (United States)

Wilkin, Thomas; Nwoke, Godfrey I.

2011-01-01

The role of Career and Technical Education (CTE) as a major source of skilled workers for the American economy and a vital component of American education is well established. Several recent studies show that when CTE programs combine rigorous academic standards and industry-based technical content, the result is higher academic achievement and…

GLOBAL 2009: Closing speech - the bulk of technical sessions

International Nuclear Information System (INIS)

Greneche, D.

2009-01-01

The author proposes an overview of the content of the hundred technical sessions of the GLOBAL 2009 conference. Thus, he addresses the twelve main issues: the upstream part of the fuel cycle, the present status of used fuel recycling, the waste management strategies and technologies, the transportation and storage of used fuels and radioactive materials, the definitive storage of nuclear wastes, the new technologies for fuel recycling, advanced designs of reactor cores and fuel management, long life radionuclide transmutation systems, the non proliferation issue, material management and options for sustainable fuel cycles, dismantling, decommissioning and resulting material management, transverse topics (technical-economic studies, nuclear energy applications other than electricity production, challenges of sustainable development of nuclear energy, advanced researches)

Definition of Intervener Services and Interveners in Educational Settings. Technical Report

Science.gov (United States)

National Consortium on Deaf-Blindness, 2013

2013-01-01

This technical report synthesizes the process and information used by National Consortium on Deaf-Blindness (NCDB) in the development of a consistently applied definition of intervener services. It addresses challenges and questions, provides comparisons between interveners and paraprofessionals, and offers definitions, roles and concepts used by…

Key technological challenges for JSFR development

International Nuclear Information System (INIS)

Morishita, Masaki; Nakai, Ryodai; Aoto, Kazumi

2008-01-01

JSFR is a sodium cooled loop type fast reactor on which a conceptual design study is now underway in the framework of 'Fast Reactor Cycle Technology Development Project (FaCT project)' of Japan. Achieving economic competitiveness with future light water reactors, along with assuring high level of safety and reliability, is among the most crucial development targets. A number of innovative technologies are pursued for these purposes. A two loop primary heat transfer system (PHTS) design, integration of a main circulation pump and an intermediate heat exchanger (IHX) into one single component, and adoption of high chrome ferritic steel as a structural material are typical technologies mainly for economic purposes. A passive shutdown system, decay heat removal by natural convection, and re-criticality free core configuration are those for mainly safety enhancement purposes. Technically challenging issues inevitably accompany these innovative technologies, and a systematic research and development program is undertaken for resolving these issues and realization of the plant design. An overall picture will be given in this paper on the design concept of JSFR that will be followed by descriptions on the major innovative technologies and their relevant research and development activities. (author)

Human research ethics committees in technical universities.

Science.gov (United States)

Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

2014-07-01

Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

INDOT Technical Training Plan : [Technical Summary

Science.gov (United States)

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Development of an Interdisciplinary Undergraduate Major in The Earth System, Environment and Society

Science.gov (United States)

Wuebbles, D. J.

2003-12-01

Humanity faces great challenges in the 21st Century to understand and limit our impact on the Earth System. To address these challenges, it is essential to understand the nature and implications of environmental change, and the complexity of the Earth system. We need to educate citizens that have the background to make new developments in understanding technical aspects of the Earth System, and to develop an understanding the interactions between society and the Earth System sufficient to make informed policy choices. Traditional disciplinary departments and majors don't fully address this; teaching and research talent in the study of the Earth System is spread over many disciplinary-oriented departments. At the University of Illinois, we are currently developing a new cross-disciplinary undergraduate major being called The Earth system, environment and Society. This development is co-sponsored by a number of departments centered in the College of Liberal Arts & Sciences (but including other departments throughout the university). Our intention is that this major will be a catalyst for bringing together the many disciplines involved in Earth System Science education. The curriculum and course for study will focus on the science and human dimensions of the Earth system, with special emphasis on the processes and issues related to the environment across a range of spatial scales from local and regional to global. Along with meeting the requirements expected of all students in a liberal arts and sciences major, students in The Earth System, Environment and Society major will be required to complete a core set of courses designed to introduce students to all of the different components of the Earth System (students will choose from course options in both the sciences and the social sciences). After completing the core courses, students will then focus their studies on one of the two options within the major, Science of the Earth System (this option will emphasize the

Risk-based technical specifications program: Site interview results

International Nuclear Information System (INIS)

Andre, G.R.; Baker, A.J.; Johnson, R.L.

1991-08-01

The Electric Power Research Institute and Pacific Gas and Electric Company are sponsoring a program directed at improving Technical Specifications using risk-based methods. The major objectives of the program are to develop risk-based approaches to improve Technical Specifications and to develop an Interactive Risk Advisor (IRA) prototype. The IRA is envisioned as an interactive system that is available to plant personnel to assist in controlling plant operation. Use of an IRA is viewed as a method to improve plant availability while maintaining or improving plant safety. In support of the program, interviews were conducted at several PWR and BWR plant sites, to elicit opinions and information concerning risk-based approaches to Technical Specifications and IRA requirements. This report presents the results of these interviews, including the functional requirements of an IRA. 2 refs., 6 figs., 2 tabs

Network design management and technical perspectives

CERN Document Server

Piliouras, Teresa C

2004-01-01

MAKING THE BUSINESS CASE FOR THE NETWORKManagement Overview of Network DesignDefine the Business ObjectivesDetermine Potential Risks, Dependencies, Costs andBenefitsIdentify Project RequirementsDevelop Project Implementation ApproachStrategic Positioning Using NetworksCase StudiesCalculation of Technology's Strategic ValueDealing with Major Design ChallengesOrganizational Concerns and RecommendationsTechnology Concerns and RecommendationsSimilarities and Differences between Voice and DataNetwork Design and PlanningMajor Trends and Technology EnablersSocietal TrendsService Provider TrendsMajor

Technical review of the da Vinci surgical telemanipulator.

Science.gov (United States)

Freschi, C; Ferrari, V; Melfi, F; Ferrari, M; Mosca, F; Cuschieri, A

2013-12-01

The da Vinci robotic surgical telemanipulator has been utilized in several surgical specialties for varied procedures, and the users' experiences have been widely published. To date, no detailed system technical analyses have been performed. A detailed review was performed of all publications and patents about the technical aspects of the da Vinci robotic system. Published technical literature on the da Vinci system highlight strengths and weaknesses of the robot design. While the system facilitates complex surgical operations and has a low malfunction rate, the lack of haptic (especially tactile) feedback and collisions between the robotic arms remain the major limitations of the system. Accurate, preplanned positioning of access ports is essential. Knowledge of the technical aspects of the da Vinci robot is important for optimal use. We confirmed the excellent system functionality and ease of use for surgeons without an engineering background. Research and development of the surgical robot has been predominant in the literature. Future trends address robot miniaturization and intelligent control design. Copyright © 2012 John Wiley & Sons, Ltd.

Technical Performance as a Predictor of Clinical Outcomes in Laparoscopic Gastric Cancer Surgery.

Science.gov (United States)

Fecso, Andras B; Bhatti, Junaid A; Stotland, Peter K; Quereshy, Fayez A; Grantcharov, Teodor P

2018-03-23

The purpose of this study was to evaluate the relationship between technical performance and patient outcomes in laparoscopic gastric cancer surgery. Laparoscopic gastrectomy for cancer is an advanced procedure with high rate of postoperative morbidity and mortality. Many variables including patient, disease, and perioperative management factors have been shown to impact postoperative outcomes; however, the role of surgical performance is insufficiently investigated. A retrospective review was performed for all patients who had undergone laparoscopic gastrectomy for cancer at 3 teaching institutions between 2009 and 2015. Patients with available, unedited video-recording of their procedure were included in the study. Video files were rated for technical performance, using Objective Structured Assessments of Technical Skills (OSATS) and Generic Error Rating Tool instruments. The main outcome variable was major short-term complications. The effect of technical performance on patient outcomes was assessed using logistic regression analysis with backward selection strategy. Sixty-one patients with available video recordings were included in the study. The overall complication rate was 29.5%. The mean Charlson comorbidity index, type of procedure, and the global OSATS score were included in the final predictive model. Lower performance score (OSATS ≤29) remained an independent predictor for major short-term outcomes (odds ratio 6.49), while adjusting for comorbidities and type of procedure. Intraoperative technical performance predicts major short-term outcomes in laparoscopic gastrectomy for cancer. Ongoing assessment and enhancement of surgical skills using modern, evidence-based strategies might improve short-term patient outcomes. Future work should focus on developing and studying the effectiveness of such interventions in laparoscopic gastric cancer surgery.

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the System-Wide Safety and Assurance Technologies Project

Science.gov (United States)

Withrow, Colleen A.; Reveley, Mary S.

2015-01-01

The Aviation Safety Program (AvSP) System-Wide Safety and Assurance Technologies (SSAT) Project asked the AvSP Systems and Portfolio Analysis Team to identify SSAT-related trends. SSAT had four technical challenges: advance safety assurance to enable deployment of NextGen systems; automated discovery of precursors to aviation safety incidents; increasing safety of human-automation interaction by incorporating human performance, and prognostic algorithm design for safety assurance. This report reviews incident data from the NASA Aviation Safety Reporting System (ASRS) for system-component-failure- or-malfunction- (SCFM-) related and human-factor-related incidents for commercial or cargo air carriers (Part 121), commuter airlines (Part 135), and general aviation (Part 91). The data was analyzed by Federal Aviation Regulations (FAR) part, phase of flight, SCFM category, human factor category, and a variety of anomalies and results. There were 38 894 SCFM-related incidents and 83 478 human-factorrelated incidents analyzed between January 1993 and April 2011.

Socio-technical systems and interaction design - 21st century relevance.

Science.gov (United States)

Maguire, Martin

2014-03-01

This paper focuses on the relationship between the socio-technical system and the user-technology interface. It looks at specific aspects of the organisational context such as multiple user roles, job change, work processes and workflows, technical infrastructure, and the challenges they present for the interaction designer. The implications of trends such as more mobile and flexible working, the use of social media, and the growth of the virtual organisation, are also considered. The paper also reviews rapidly evolving technologies such as pervasive systems and artificial intelligence, and the skills that workers will need to engage with them. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Making Norms to Tackle Global Challenges

DEFF Research Database (Denmark)

Nilsson, Adriana

2017-01-01

by mandates, moral standing and technical expertise, IGOs act in two ways: operating with high level of political support, these organisations guide priority setting and norm development through the definition of collective problems and solutions, including STI aspects, establishing a shared vision; involving......This paper argues that Intergovernmental Organisations (IGOs) can play a significant role in the processes of system transformation required by Grand Challenges. The reason is their potential to influence socio-technical regimes connected to policy areas in which they have authority. Supported......, designed by UNITAID to fulfil access and innovation needs in relation to HIV/AIDS drugs, and WIPO Re:Search, set up by WIPO to support collaboration and accelerate discovery and product development for Neglected Tropical Diseases, Malaria and Tuberculosis....

The political challenges of nuclear waste

International Nuclear Information System (INIS)

Andren, Mats; Strandberg, Urban

2005-01-01

This anthology is made up of nine essays on the nuclear waste issue, both its political, social and technical aspects, with the aim to create a platform for debate and planning of research. The contributions are titled: 'From clean energy to dangerous waste - the regulatory management of nuclear power in the Swedish welfare society. An economic-historic review , 'The course of the high-level waste into the national political arena', 'The technical principles behind the Swedish repository for spent fuels', 'Waste, legitimacy and local citizenship', 'Nuclear issues in societal planning', 'Usefulness or riddance - transmutation or just disposal?', 'National nuclear fuel policy in an European Union?', 'Conclusion - the challenges of the nuclear waste issue', 'Final words - about the need for critical debate and multi-disciplinary research'

Technical and regulatory challenges for digital instrumentation and control and control room systems in nuclear plants

International Nuclear Information System (INIS)

Torok, R.; Naser, J.; Harris, T.; Keithline, K.

2006-01-01

There are several unsettled technical and licensing issues in the areas of instrumentation and control (I and C), human factors, and updated control room designs that need coordinated, proactive industry attention. Some of these issues are already causing protracted regulatory reviews for existing plants, and left untreated, may cause substantial delays and increased costs for new plant combined construction and operating license approvals. Both industry and the NRC will have roles in resolving the key issues and addressing them in future design efforts and regulatory reviews. Where action is needed, the industry will want to minimize costs and risks by defining industry consensus solutions with corresponding technical bases. NEI has formed a working group to coordinate industry efforts and communications with NRC staff. The working group will also help determine priorities and coordinate both new and existing plant resources. EPRI will provide technical input and guidance for the working group. In order to be able to conduct reviews in a timely fashion, the NRC will likely need to enhance and expand staff resources as existing plants are upgraded and new plant reviews become more active. The industry initiative began with a workshop sponsored by EPRI and NEI on March 28-29, 2006, which led to the creation of the NEI working group. The working group has now identified and prioritized important generic issues, established resolution paths and schedules, and identified the roles of various stakeholders including utility companies, EPRI, NEI, vendors and the NRC. Through the course of this initiative I and C issues for both existing and new plants are being addressed. This paper describes the key I and C related technical and regulatory issues and their implications for new and operating plants, and provides a status report on the efforts to resolve them. (authors)

Major challenges in engineering and its role in society

Directory of Open Access Journals (Sweden)

José Ismael Peña-Reyes

2011-02-01

Full Text Available Engineering has a long historical tradition; it began as a discipline in the sixteenth century and reached maturity during the twentieth century. However, the twenty-first century’s features strongly differentiate it from earlier times; when referring to this period, we speak of globalisation, knowledge society and national innovation systems. This is a period marked by contradictions. Technological developments and social and political changes have improved human beings’ quality of life. New technologies have provided the context for its opening decade: nanotechnology, microelectronics and nanoelectronics, photonics, materials science, biotechnology, information and communications technology, logistics, medical engineering and renewable and clean energy. Technologies feed each other and off each other, offering endless possibilities for development. This is a time where the doors of political democratisation, art and culture have opened; however, it is also a world facing political, financial and environmental crisis. Colombia, particularly, is a country encountering problems regarding its competitiveness, having crippling levels of corruption and impunity, problems related to education, health and infrastructure. Colombia needs more engineers who can contribute towards resolving complex problems. Such engineers must have had excellent technical and humanistic training; they must be creative, able to work as a team, have become leaders who can listen and communicate and help develop a world to ensure that humans and other living species on earth can flourish with a uniform, durable level regarding their quality of life. Work must thus be done on critical engineering education and the present work presents some characteristics concerning what these engineers training/education should be.

Challenges on wind power development in China

Energy Technology Data Exchange (ETDEWEB)

Liu, Qianjin; Shi, Jingli

2010-09-15

Wind power has experienced exponential growth in China in the past five years, which exceeds the most optimistic expectations. The increasing penetration and aggressive future plan are arousing big concerns about its impact on operation and security of existing power networks. This paper introduces present condition of wind power development in China and the challenges on both grid integration and regulations. Most of these challenges are economical rather than technical. Feed-in tariff policies and grid code are the key countermeasures. Accurate wind forecast and economical mass energy storage are needed to guarantee compliance of wind power to the grid.

Technical Issues Map for the NHI System Interface and Support Systems Area: 1st Quarter FY 07

International Nuclear Information System (INIS)

Steven R. Sherman

2006-01-01

This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway. The technical issues are ranked according to priority and by assumed resolution dates. Due to funding limitations, not all high-priority technical issues are under study at the present time, and more resources will need to be dedicated to tackling such issues in the future. This technical issues map is useful for understanding the relative importance of various technical challenges and will be used as a planning tool for future work package planning

Stressing the Need for Safety in Technical Education

Science.gov (United States)

Defore, Jesse j.

1974-01-01

Discusses the importance of a safety orientation program in technical education and major components of a safety-conscious working enviroment. Suggests every institution take such measures as appointment of a safety officer, maintenance of a safety posture, inclusion of safety in curricula, and application of good safety practices. (CC)

Technical note on drainage systems

DEFF Research Database (Denmark)

Bentzen, Thomas Ruby

This technical note will present simple but widely used methods for the design of drainage systems. The note will primarily deal with surface water (rainwater) which on a satisfactorily way should be transport into the drainage system. Traditional two types of sewer systems exist: A combined system......, where rainwater and sewage is transported in the same pipe, and a separate system where the two types of water are transported in individual pipe. This note will only focus on the separate rain/stormwater system, however, if domestic sewage should be included in the dimensioning procedure, it......’s not major different than described below - just remember to include this contribution for combined systems where the surface water (rain) and sewage are carried in the same pipes in the system and change some of the parameters for failure allowance (this will be elaborated further later on). The technical...

Technical evaluation of major candidate blanket systems for fusion power reactor

International Nuclear Information System (INIS)

Tone, Tatsuzo; Seki, Masahiro; Minato, Akio

1987-03-01

The key functions required for tritium breeding blankets for a fusion power reactor are: (1) self-sufficient tritium breeding, (2) in-situ tritium recovery and low tritium inventory, (3) high temperature cooling giving a high efficiency of electricity generation and (4) thermo-mechanical reliability and simplified remote maintenance to obtain high plant availability. Blanket performance is substantially governed by materials selection. Major options of structure/breeder/coolant/neutron multiplier materials considered for the present design study are PCA/Li 2 O/H 2 O/Be, Mo-alloy/Li 2 O/He/Be, Mo-alloy/LiAlO 2 /He/Be, V-alloy/Li/Li/none, and Mo-alloy/Li/He/none. In addition, remote maintenance of blankets, tritium recovery system, heat transport and energy conversion have been investigated. In this report, technological problems and critical R and D issues for power reactor blanket development are identified and a comparison of major candidate blanket concepts is discussed in terms of the present materials data base, economic performance, prospects for future improvements, and engineering feasibility and difficulties based on the results obtained from individual design studies. (author)

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Spivey, James J. [Louisiana State Univ., Baton Rouge, LA (United States)

2016-02-02

The research summarized here has the goal of developing a fundamental understanding of how catalysts work. These materials are demonstrably essential to our daily life, from the cars we drive to the clothes we wear. Our Center advances the science behind how we prepare, analyze, and describe catalysts. This has been identified by one of the documents guiding Federal research objectives (Directing Matter and Energy: Five Challenges for Science and the Imagination): “Major challenges in heterogeneous catalysis are to more clearly define the nature of the active sites, to engineer at the molecular level catalysis with designed properties in three dimensions, and to create new catalysts for new transformations.” This directly addresses this objective.

Women’s Participation in Scientific and Technical Field in Malaysia

OpenAIRE

Nuraihan Mat Daud

1999-01-01

The scientific and technical fields are generally dominated by men. Women tend to shy away from using technical devices and from trying to understand the principles behind their operation. One of the major reasons for their seemingly lack of interest is the lack of encouragement from their family and society. This paper discusses the steps taken by a country, namely, Malaysia, to encourage its female population to venture into this area. Policies were created by the government for this purpos...

Screening and identification of putative allergens in berry fruits of the Rosaceae family: technical challenges.

Science.gov (United States)

Marzban, Gorji; Maghuly, Fatemeh; Herndl, Anita; Katinger, Hermann; Laimer, Margit

2008-01-01

Cross-reactive proteins in small fruits of the Rosaceae family like strawberry, raspberry and blackberry revealed an unexpected complex IgE-reactivity pattern. Several copies of PR-10 and PR-14 proteins were detected by Southern blots in strawberry, raspberry and blackberry. In raspberry, the highest similarity at the DNA level for PR-10 and PR-14 (Rub i 1 and Rub i 3) was detected to strawberry sequences of Fra a 1 and Fra a 3. At the protein level, Rub i 1 and Rub i 3 showed more than 70% identity with homologous proteins of rosaceous fruits. Furthermore, raspberries contained additional putative allergens, e.g. class III acidic chitinases and cyclophilins. Blackberries were shown to share at least two well-known major fruit allergens with other rosaceous fruits, namely PR-10s and PR-14s homologous proteins. However the IgE-reactive proteins of small fruits are still not extensively investigated. The main challenges in studying small fruit allergens are the complexity of the fruit matrix, the diversity of physico-chemical properties of fruit proteins, the lack of appropriate protein extraction procedures and the missing information about the influence of processing treatments on food components.

AREVA Technical Days (ATD) session 1: Energy outlook and presentation of the Areva Group; AREVA Technical Days (ATD) session 1: enjeux energetiques et presentation du groupe AREVA

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This first session deals with energy challenges and nuclear, public acceptance of nuclear power, mining activities, chemistry activities, enrichment activities, fuel assembly, reactors and services activities, nuclear measurements activities, reprocessing and recycling activities, logistics activities and connectors activities. (A.L.B.)

Technical aspects of ageing for long-term operation

International Nuclear Information System (INIS)

2003-01-01

The aspects of plant ageing management gained increasing attention over the last ten years. Numerous technical studies have been performed to study the impact of ageing mechanisms on the safe and reliable operation of nuclear power plants. National research activities have been initiated or are in progress to provide the technical basis for decision making processes. The long-term operation of nuclear power plants is influenced by economic considerations, the socio-economic environment including public acceptance, developments in research and the regulatory framework, the availability of technical infrastructure to maintain and service the systems, structures and components as well as qualified personnel. This document restricts itself to the technical aspects of the basis for long-term operation. Its objective is the characterisation of technical key items. Regulatory aspects are being discussed within CNRA. The light water reactor (LWR) nuclear power plants in operation are generically of pressurised water reactor (PWR) or boiling water reactor (BWR) type. The design principles of the nuclear steam supply system (NSSS) are proven in long-term operation as well as the principles being applied to the balance of plant (BOP), although a rather large variety of technical solutions do exist. The steps in the developments were tremendous in the 60's and 70's up to a power output of 1200 MWe followed by a period of further optimisation in the 80's and 90's, which raised it close to 1500 MWe. The NPPs in operation can be grouped into different generations of design in order to characterise similarities in technical principles and manufacturing standards. In the area of civil and mechanical structures and components there has been continuous development to optimise the design, the materials used as well as the manufacturing technology. The majority of these structures and components is still in use. In principle there are no major obstacles to further use of these

The Challenges of Applying Planetary Boundaries as a Basis for Strategic Decision-Making in Companies with Global Supply Chains

Directory of Open Access Journals (Sweden)

Roland Clift

2017-02-01

Full Text Available The Planetary Boundaries (PB framework represents a significant advance in specifying the ecological constraints on human development. However, to enable decision-makers in business and public policy to respect these constraints in strategic planning, the PB framework needs to be developed to generate practical tools. With this objective in mind, we analyse the recent literature and highlight three major scientific and technical challenges in operationalizing the PB approach in decision-making: first, identification of thresholds or boundaries with associated metrics for different geographical scales; second, the need to frame approaches to allocate fair shares in the ‘safe operating space’ bounded by the PBs across the value chain and; third, the need for international bodies to co-ordinate the implementation of the measures needed to respect the Planetary Boundaries. For the first two of these challenges, we consider how they might be addressed for four PBs: climate change, freshwater use, biosphere integrity and chemical pollution and other novel entities. Four key opportunities are identified: (1 development of a common system of metrics that can be applied consistently at and across different scales; (2 setting ‘distance from boundary’ measures that can be applied at different scales; (3 development of global, preferably open-source, databases and models; and (4 advancing understanding of the interactions between the different PBs. Addressing the scientific and technical challenges in operationalizing the planetary boundaries needs be complemented with progress in addressing the equity and ethical issues in allocating the safe operating space between companies and sectors.

New LHCb Management readies for run 2 challenges

CERN Multimedia

Antonella Del Rosso

2014-01-01

As of 1 July, LHCb, one of the four biggest experiments at the LHC, will have a new Management. Ahead are the huge challenges of run 2 and the following long technical shutdown during which LHCb will undergo a major upgrade. In the meantime, the discovery of new physics could be a dream within reach…   New LHCb Spokesperson, Guy Wilkinson.   “We have to make sure that the detector wakes up after its long hibernation and goes back to data taking in the most efficient way and that we are able to process all these data to produce high-quality physics results,” says Guy Wilkinson, new Spokesperson of the LHCb collaboration. Although this already sounds like a considerable “to-do” list for the coming months, it’s just the beginning of a much longer and ambitious plan. “The previous management has done an excellent job in analysing the data we took during run 1. They also put on a very sound footing the LHCb upgrade, whi...

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

Science.gov (United States)

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

Educational Leadership: Key Challenges and Ethical Tensions

Science.gov (United States)

Duignan, Patrick

2007-01-01

"Educational Leadership" is a major research book on contemporary leadership challenges for educational leaders. In this groundbreaking new work, educational leaders in schools, including teachers, are provided with ways of analysing and resolving common but complex leadership challenges. Ethical tensions inherent in these challenges are…

The unknown on the doorstep: Hong Kong's fears concerning Daya Bay, China's first major nuclear power station and the public relations challenges

Energy Technology Data Exchange (ETDEWEB)

Chan, Albert [Hong Kong Nuclear Investment Co Ltd., Hongkong (China)

1995-07-01

The Guangdong Nuclear Power Station at Daya Bay is located east of the Shenzhen Special Economic Zone in Southern China. It is a joint venture between Hong Kong and China. In terms of construction schedule, budget and performance, Daya Bay ranks amongst the best plants anywhere. This achievement is even more apparent when one takes into account the fact that Daya Bay is the first major nuclear power station in China and that a large amount of interface and co-ordination is required to bring together French and British technologies in a non-English speaking environment. This Paper addresses the various and challenging public relations issues faced by Daya Bay during the last 15 years (from feasibility study stage). The negotiation for the Daya Bay nuclear power station project coincided with the political negotiations between China and Britain over the future of Hong Kong - the 1997 issue. (The political negotiations commenced in September 1982 and concluded in late 1984). Concerns over the nuclear project were heard during this phase but were limited to local environmental groups rather than the general public. The focus was more on the environmental and radiological impact of a nuclear power station than specific technical and safety issues. As for the general public, the project wasn't much of an issue until April, 1986 (Chernobyl accident). Period from 1986-1993 was the period of construction of the Daya Bay nuclear power station. An antinuclear campaign was launched by a few local activists who claimed to have collected signatures from one million people in Hong Kong urging the Chinese Government to shelve the project. The Hong Kong public did not understand the difference between Chernobyl type and PWR-type nuclear reactors (Daya Bay is a PWR) nor were they aware that even in the case of Chernobyl, only residents within 30 km needed to be evacuated. These rational arguments and facts could not compete with the horror stories and news photos appearing in the

The unknown on the doorstep: Hong Kong's fears concerning Daya Bay, China's first major nuclear power station and the public relations challenges

International Nuclear Information System (INIS)

Chan, Albert

1995-01-01

The Guangdong Nuclear Power Station at Daya Bay is located east of the Shenzhen Special Economic Zone in Southern China. It is a joint venture between Hong Kong and China. In terms of construction schedule, budget and performance, Daya Bay ranks amongst the best plants anywhere. This achievement is even more apparent when one takes into account the fact that Daya Bay is the first major nuclear power station in China and that a large amount of interface and co-ordination is required to bring together French and British technologies in a non-English speaking environment. This Paper addresses the various and challenging public relations issues faced by Daya Bay during the last 15 years (from feasibility study stage). The negotiation for the Daya Bay nuclear power station project coincided with the political negotiations between China and Britain over the future of Hong Kong - the 1997 issue. (The political negotiations commenced in September 1982 and concluded in late 1984). Concerns over the nuclear project were heard during this phase but were limited to local environmental groups rather than the general public. The focus was more on the environmental and radiological impact of a nuclear power station than specific technical and safety issues. As for the general public, the project wasn't much of an issue until April, 1986 (Chernobyl accident). Period from 1986-1993 was the period of construction of the Daya Bay nuclear power station. An antinuclear campaign was launched by a few local activists who claimed to have collected signatures from one million people in Hong Kong urging the Chinese Government to shelve the project. The Hong Kong public did not understand the difference between Chernobyl type and PWR-type nuclear reactors (Daya Bay is a PWR) nor were they aware that even in the case of Chernobyl, only residents within 30 km needed to be evacuated. These rational arguments and facts could not compete with the horror stories and news photos appearing in the

Opportunities and Challenges for Technology Development and Adoption in Public Libraries

DEFF Research Database (Denmark)

Serholt, Sofia; Eriksson, Eva; Dalsgaard, Peter

2018-01-01

In this paper, we discuss opportunities and challenges for technology development and adoption in public libraries. The results are based on a multi-site comparative study and thematic analysis of six months of extensive ethnographic work in libraries in three different European countries....... The results explore the socio-technical practices, understandings, and perspectives of library staff and patrons when it comes to the role(s) and function(s) of libraries today. The contribution of this paper is two fold. Firstly, the results from the analysis of rich ethnographic data presented under six...... themes. Secondly, we offer a list of identified key opportunities and challenges focusing on 1) media and technology literacy, 2) institutional transformation and technical infrastructures, 3) resource constraints among library staff, and 4) a shift in focus towards supporting activities....

21st century challenges and opportunities for nuclear waste management

International Nuclear Information System (INIS)

McKinley, I.G.

2009-01-01

The technical arguments for massive expansion of nuclear power generation are convincing, but such a renaissance requires public acceptance. For diehard nuclear opponents, criticism now focuses on its Achilles heel - the unsolved (and often claimed to be insoluble) problem of disposal of the resultant long-lived waste. In fact, the geological disposal of nuclear waste can be managed safely with existing technology and should really be touted as one of the advantages of this option. Clearly, there is a major challenge in communicating disposal safety to key stakeholders in order to realise this benefit. Nevertheless, the growth of environmental concern about global warming and the present economic climate may present opportunities to initiate dialogue with relevant communities, allowing the attractions of hosting future disposal facilities to be seen. Rather than being the archetypal focus for NIMBY reactions, maybe within a few years we can look forward to growing competition to host geological repositories for radioactive waste.(Author)

Low-level waste management program: technical program overview

International Nuclear Information System (INIS)

Lowrie, R.S.

1981-01-01

The mission of the technical program is to develop the technology component of the Department of Energy's Low-Level Waste Management Program and to manage research and development, demonstration, and documentation of the technical aspects of the program. Some of the major technology objectives are: develop and demonstrate techniques for waste generation reduction; develop and demonstrate waste treatment, handling and packaging techniques; develop and demonstrate the technology for greater confinement; and develop the technology for remedial action at existing sites. In addition there is the technology transfer objective which is to compile and issue a handbook documenting the technology for each of the above technology objectives

Report format preferences of technical managers and nonmanagers

Science.gov (United States)

Pinelli, T. E.; Cordle, V. M.; Glassman, M.; Vondran, R. F., Jr.

1984-01-01

A survey of engineers and scientists concerning the format of NASA technical reports indicates that a summary as well as an abstract should be included, that the definitions of symbols and glossary of terms should be located in the front of the report, and that the illustrative material should be integrated with the text rather than grouped at the end of the report. Citation of references by number, one-column, ragged-right-margin layout, and third-person writing style are also preferred by a majority of the respondents. The preferences of managers and nonmanagers are very similar for all aspects of technical report format covered by the survey.

Systems for deep brain stimulation: review of technical features.

Science.gov (United States)

Amon, A; Alesch, F

2017-09-01

The use of deep brain stimulation (DBS) is an important treatment option for movement disorders and other medical conditions. Today, three major manufacturers provide implantable systems for DBS. Although the underlying principle is basically the same for all available systems, the differences in the technical features vary considerably. This article outlines aspects regarding the technical features of DBS systems. The differences between voltage and current sources are addressed and their effect on stimulation is shown. To maintain clinical benefit and minimize side effects the stimulation field has to be adapted to the requirements of the patient. Shaping of the stimulation field can be achieved by the electrode design and polarity configuration. Furthermore, the electric signal consisting of stimulation rate, stimulation amplitude and pulse width affect the stimulation field. Interleaving stimulation is an additional concept, which permits improved treatment outcomes. Therefore, the electrode design, the polarity, the electric signal, and the concept of interleaving stimulation are presented. The investigated systems can be also categorized as rechargeable and non-rechargeable, which is briefly discussed. Options for interconnecting different system components from various manufacturers are presented. The present paper summarizes the technical features and their combination possibilities, which can have a major impact on the therapeutic effect.

Radiation doses in pediatric computed tomography procedures: challenges facing new technologies

International Nuclear Information System (INIS)

Cotelo, E.; Padilla, M.; Dibarboure, L.

2008-01-01

Despite the fact that in recent years an increasing number of radiologists and radiological technologists have been applying radiation dose optimization techniques in paediatric Computed Tomography (CT) examinations, dual and multi -slice CT (MSCT) scanners present a new challenge in Radiation Protection (RP). While on one hand these scanners are provided with Automatic Exposure Control (AEC) devices, dose reduction modes and dose estimation software, on the other hand Quality Control (QC) tests and CT Kerma Index (C) measurements and patient dose estimation present specific difficulties and require changes or adaptations of traditional QC protocols. This implies a major challenge in most developing countries where Quality Assurance Programmes (QAP) have not been implemented yet and there is a shortage in the number of medical physicists This paper analyses clinical and technical protocols as well as patient doses in 204 CT body procedures performed in 154 children. The investigation was carried out in a paediatric reference hospital of Uruguay, where are performed an average of 450 paediatric CT examinations per month in a sole CT dual scanner. Besides, C VOL reported from the scanner display was registered in order to be related with the same dosimetric quantity derived from technical parameters and C values published on tables. Results showed that not all the radiologists applied the same protocol in similar clinical situations delivering unnecessary patient dose with no significant differences in image quality. Moreover, it was found that dose reduction modes represent a drawback in order to estimate patient dose when mA changes according to tissue attenuation, in most cases in each rotation. The study concluded on the importance of QAP that must include education on RP of radiologists and technologists, as well as in the need of medical physicists to perform QC tests and patient dose estimations and measurements. (author)

Dynamics of Major Cereals Productivity in Nepal

Directory of Open Access Journals (Sweden)

Samaya Gairhe

2018-05-01

Full Text Available Cereal crops have played major roles in addressing food security issues in Nepal. In recent years there have been fluctuations in crop production and demands situations due to various reasons. Thus, the present study aims to analyze the dynamics of major cereals productivity in Nepal from 1995 to 2014. Focus group discussions were done in mid-hills and tarai of Nepal in 2015. Percentage change, compound growth rate, annual rate of change, coefficient of variation, instability index were calculated to analyze results. The result shows that the area, production and productivity of major cereals had an increasing trend over the study period. The major factors contributing on productivity increase in cereal crops were irrigation facilities, use of improved and hybrid seeds, chemical fertilizer and better technical knowhow among the farmers. For effective adoption of research outputs to improve the productivity emphasis should also be given on promotion of public private partnership (PPP in research and development.

Technical Challenges and Opportunities of Centralizing Space Science Mission Operations (SSMO) at NASA Goddard Space Flight Center

Science.gov (United States)

Ido, Haisam; Burns, Rich

2015-01-01

The NASA Goddard Space Science Mission Operations project (SSMO) is performing a technical cost-benefit analysis for centralizing and consolidating operations of a diverse set of missions into a unified and integrated technical infrastructure. The presentation will focus on the notion of normalizing spacecraft operations processes, workflows, and tools. It will also show the processes of creating a standardized open architecture, creating common security models and implementations, interfaces, services, automations, notifications, alerts, logging, publish, subscribe and middleware capabilities. The presentation will also discuss how to leverage traditional capabilities, along with virtualization, cloud computing services, control groups and containers, and possibly Big Data concepts.

The Eurosafe Forum 2003: Nuclear expertise and challenges of the enlargement of the European Union

Energy Technology Data Exchange (ETDEWEB)

Lacronique, Jean-Francois; Repussard, Jacques [Institut de Radioprotection et de Surete Nucleaire, IRSN, B.P. 17, F - 92262 Fontenay-aux-Roses Cedex (France); Hahn, Lothar [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH, GRS, Schwertnergasse 1, D - 50667 Koeln (Germany)

2003-07-01

EUROSAFE is an international forum for discussions among experts from technical safety organisations, research institutes, safety authorities, utilities, the industry, public authorities and non-governmental organisations concerning the status of and recent achievements in nuclear installation safety, waste management, radiation safety and nuclear material security. The Eurosafe Forum 2003 - the fifth of its kind - was held at the Palais Brongniart in Paris on November 25 and 26, 2003. This year's theme was: 'Nuclear expertise and challenges of the enlargement of the European Union: speakers in the various European countries about the environmental scan before enlargement, development and structuring perspectives within the enlarged Europe'. The event brought together 445 experts and researchers from around the world (including 124 from Germany, 184 from France, 88 from Eastern Europe, as well as representatives from Korea, Japan, the United States, Canada, Cuba, and Armenia. The proceedings of the symposium can now be consulted online. The fifth edition of the forum focused on nuclear expertise and the challenge of EU-enlargement and the latest work carried out by GRS, IRSN and their partners from the European Union, Switzerland and Eastern Europe. Nuclear energy contributes approximately one third of European electricity production. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are increasingly international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge and the need for greater transparency

The Eurosafe Forum 2003: Nuclear expertise and challenges of the enlargement of the European Union

International Nuclear Information System (INIS)

Lacronique, Jean-Francois; Repussard, Jacques

2003-01-01

EUROSAFE is an international forum for discussions among experts from technical safety organisations, research institutes, safety authorities, utilities, the industry, public authorities and non-governmental organisations concerning the status of and recent achievements in nuclear installation safety, waste management, radiation safety and nuclear material security. The Eurosafe Forum 2003 - the fifth of its kind - was held at the Palais Brongniart in Paris on November 25 and 26, 2003. This year's theme was: 'Nuclear expertise and challenges of the enlargement of the European Union: speakers in the various European countries about the environmental scan before enlargement, development and structuring perspectives within the enlarged Europe'. The event brought together 445 experts and researchers from around the world (including 124 from Germany, 184 from France, 88 from Eastern Europe, as well as representatives from Korea, Japan, the United States, Canada, Cuba, and Armenia. The proceedings of the symposium can now be consulted online. The fifth edition of the forum focused on nuclear expertise and the challenge of EU-enlargement and the latest work carried out by GRS, IRSN and their partners from the European Union, Switzerland and Eastern Europe. Nuclear energy contributes approximately one third of European electricity production. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are increasingly international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge and the need for greater transparency

The Eurosafe Forum 2003: Nuclear expertise and challenges of the enlargement of the European Union

Energy Technology Data Exchange (ETDEWEB)

Lacronique, Jean-Francois; Repussard, Jacques (eds.) [Institut de Radioprotection et de Surete Nucleaire, IRSN, B.P. 17, F - 92262 Fontenay-aux-Roses Cedex (France); Hahn, Lothar (ed.) [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH, GRS, Schwertnergasse 1, D - 50667 Koeln (Germany)

2003-07-01

EUROSAFE is an international forum for discussions among experts from technical safety organisations, research institutes, safety authorities, utilities, the industry, public authorities and non-governmental organisations concerning the status of and recent achievements in nuclear installation safety, waste management, radiation safety and nuclear material security. The Eurosafe Forum 2003 - the fifth of its kind - was held at the Palais Brongniart in Paris on November 25 and 26, 2003. This year's theme was: 'Nuclear expertise and challenges of the enlargement of the European Union: speakers in the various European countries about the environmental scan before enlargement, development and structuring perspectives within the enlarged Europe'. The event brought together 445 experts and researchers from around the world (including 124 from Germany, 184 from France, 88 from Eastern Europe, as well as representatives from Korea, Japan, the United States, Canada, Cuba, and Armenia. The proceedings of the symposium can now be consulted online. The fifth edition of the forum focused on nuclear expertise and the challenge of EU-enlargement and the latest work carried out by GRS, IRSN and their partners from the European Union, Switzerland and Eastern Europe. Nuclear energy contributes approximately one third of European electricity production. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are increasingly international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge and the need for greater

Technical and economic limits to fuel burnup extension. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2002-07-01

For many years, the increase of efficiency in the production of nuclear electricity has been an economic challenge in many countries which have developed this kind of energy. The increase of fuel burnup leads to a reduction in the volume of spent fuel discharged to longer fuel cycles in the reactor, which means bigger availability and capacity factors. After having increased the authorized burnup in plants, developing new alloys capable of resisting high burnup, and having accumulated data on fuel evolution with burnup, it has become necessary to establish the limitations which could be imposed by the physical evolution of the fuel, influencing fuel management, neutron properties, reprocessing or, more generally, the management of waste and irradiated fuels. It is also necessary to verify whether the benefits of lower electricity costs would not be offset by an increase in fuel management costs. The main questions are: Are technical and economic limits to the increasing of fuel burnup in parallel? Can we envisage nowadays the hardest limitation in some of these areas? Which are the main points to be solved from the technical point of view? Is this effort worthwhile considering the economy of the cycle? To which extent? For these reasons, the IAEA, following a recommendation by the International Working Group on Fuel Performance and Technology, held a Technical Committee Meeting on Technical and Economic Limits to Fuel Burnup Extension. The purpose of this meeting was to provide an international forum to review the evolution of fuel properties at increased burnup in order to estimate the limitations both from a physical and an economic point of view. The meeting was therefore divided into two parts. The first part, focusing on technical limits, was devoted to the improvement of the fuel element, such as fission gas release (FGR), RIM effect, cladding, etc. and the fabrication, core management, spent fuel and reprocessing. Eighteen related papers were presented which

INFOTECH `92: DOE Technical Information (TI) Meeting, October 21--23, 1992

Energy Technology Data Exchange (ETDEWEB)

Blanton, J.M.

1992-10-01

This proceedings contains papers presented at the 1992 Department of Energy (DOE) Technical Information Meeting held at the Office of Scientific and Technical Information (OSTI), Oak Ridge, Tennessee, October 21--23, 1992. It is composed of written presentation given orally at the meeting in either large-group or break-out sessions. The proceedings is provided as a reference tool for those who attended the meeting as well as an information document for those unable to attend. The annual DOE Technical Information meeting is designed for information professionals involved in the management of the Department`s scientific and technical information (STI). Speakers include members of the OSTI staff as well as DOE and DOE contractors and other invited specialists in the field of information. The major objective of the meeting is to provide a forum within the Department for discussing current and future information policies, trends, and management techniques as well as the technologies and standards available for managing and accessing scientific and technical information.

Technical reference book for the Energy Economic Data Base (EEDB) Program

International Nuclear Information System (INIS)

Allen, R.E.; Benedict, R.G.; Hodson, J.S.

1984-09-01

The Energy Economic Data Base (EEDB) Program is sponsored by the US Department of Energy (DOE) for the purpose of developing current technical and cost information for nuclear and comparison electric power generating stations. The EEDB contains a variety of nuclear and coal-fired power plant technical data models. Each of these data models is a complete and detailed conceptual design for a single unit, commercial, steam electric, power generating station located on a standard hypothetical Middletown site. A major effort for the Sixth Update (1983) has been the updating of the system design descriptions and selected engineering drawings for the technical data models. This update took the form of revising and expanding the system design descriptions and engineering drawings contained in the Base Data Studies, to include the technical information developed and recorded in the first five EEDB updates. The results of the update effort are contained in this EEDB Program Technical Reference Book

Challenges and Rewards of Teaching Intercultural Communication in a Technical Writing Course: A Case Study

Science.gov (United States)

Cardenas, Diana L.

2012-01-01

Community-based projects immerse technical writing students in intercultural communication, addressing local needs and shaping documents in human terms. Students at a South Texas university work to establish communication with clients in a city-county health department to create effective documents and disseminate family health legislation. To…

Using simulation to train orthopaedic trainees in non-technical skills: A pilot study.

Science.gov (United States)

Heaton, Samuel R; Little, Zoe; Akhtar, Kash; Ramachandran, Manoj; Lee, Joshua

2016-08-18

To enhance non-technical skills and to analyse participant's experience of a course tailored for orthopaedic surgeons. A Delphi technique was used to develop a course in human factors specific to orthopaedic residents. Twenty-six residents (six per course) participated in total with seven course facilitators all trained in Crisis Resource Management providing structured feedback. Six scenarios recreated challenging real-life situations using high-fidelity mannequins and simulated patients. Environments included a simulated operating suite, clinic room and ward setting. All were undertaken in a purpose built simulation suite utilising actors, mock operating rooms, mock clinical rooms and a high fidelity adult patient simulator organised through a simulation control room. Participants completed a 5-point Likert scale questionnaire (strongly disagree to strongly agree) before and after the course. This assessed their understanding of non-technical skills, scenario validity, relevance to orthopaedic training and predicted impact of the course on future practice. A course evaluation questionnaire was also completed to assess participants' feedback on the value and quality of the course itself. Twenty-six orthopaedic residents participated (24 male, 2 female; post-graduation 5-10 years), mean year of residency program 2.6 out of 6 years required in the United Kingdom. Pre-course questionnaires showed that while the majority of candidates recognised the importance of non-technical (NT) skills in orthopaedic training they demonstrated poor understanding of non-technical skills and their role. This improved significantly after the course (Likert score 3.0-4.2) and the perceived importance of these skills was reported as good or very good in 100%. The course was reported as enjoyable and provided an unthreatening learning environment with the candidates placing particular value on the learning opportunity provided by reflecting on their performance. All agreed that the

Data Sharing: Convert Challenges into Opportunities.

Science.gov (United States)

Figueiredo, Ana Sofia

2017-01-01

Initiatives for sharing research data are opportunities to increase the pace of knowledge discovery and scientific progress. The reuse of research data has the potential to avoid the duplication of data sets and to bring new views from multiple analysis of the same data set. For example, the study of genomic variations associated with cancer profits from the universal collection of such data and helps in selecting the most appropriate therapy for a specific patient. However, data sharing poses challenges to the scientific community. These challenges are of ethical, cultural, legal, financial, or technical nature. This article reviews the impact that data sharing has in science and society and presents guidelines to improve the efficient sharing of research data.

How is it going? Peformance assessment in major projects

DEFF Research Database (Denmark)

Maylor, Harvey; Johnson, Mark; Turner, Neil

2017-01-01

an enhanced service performance model. This was then tested using a survey and a structural equation model derived. Development of this yielded new classifications but most importantly, provided a more meaningful method for measuring the performance of operational transformation projects. Specifically......Determining the performance of a major project is a challenge for both practitioners and scholars. In the context of operational change projects the challenge is exacerbated by the service-intensive nature of the transformation, temporal disconnects between contracting and delivery and lack...... management in major projects from an OM perspective....

Pencilbeam irradiation technique for whole brain radiotherapy: technical and biological challenges in a small animal model.

Science.gov (United States)

Schültke, Elisabeth; Trippel, Michael; Bräuer-Krisch, Elke; Renier, Michel; Bartzsch, Stefan; Requardt, Herwig; Döbrössy, Máté D; Nikkhah, Guido

2013-01-01

We have conducted the first in-vivo experiments in pencilbeam irradiation, a new synchrotron radiation technique based on the principle of microbeam irradiation, a concept of spatially fractionated high-dose irradiation. In an animal model of adult C57 BL/6J mice we have determined technical and physiological limitations with the present technical setup of the technique. Fifty-eight animals were distributed in eleven experimental groups, ten groups receiving whole brain radiotherapy with arrays of 50 µm wide beams. We have tested peak doses ranging between 172 Gy and 2,298 Gy at 3 mm depth. Animals in five groups received whole brain radiotherapy with a center-to-center (ctc) distance of 200 µm and a peak-to-valley ratio (PVDR) of ∼ 100, in the other five groups the ctc was 400 µm (PVDR ∼ 400). Motor and memory abilities were assessed during a six months observation period following irradiation. The lower dose limit, determined by the technical equipment, was at 172 Gy. The LD50 was about 1,164 Gy for a ctc of 200 µm and higher than 2,298 Gy for a ctc of 400 µm. Age-dependent loss in motor and memory performance was seen in all groups. Better overall performance (close to that of healthy controls) was seen in the groups irradiated with a ctc of 400 µm.

AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects; AREVA Technical Days (ATD) session 3: les activites du pole reacteurs et services, aspects techniques et economiques

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

Technical and economic aspects of brown coal gasification and liquefaction

International Nuclear Information System (INIS)

Speich, P.

1980-01-01

A number of gasification and liquefaction processes for Rhenish brown coal are investigated along with the technical and economic aspects of coal beneficiation. The status of coal beneficiation and the major R + D activities are reviewed. (orig.) [de

Legal, technical and financial framework of photovoltaic self-consumption. German experience feedback

International Nuclear Information System (INIS)

Persem, Melanie

2014-01-01

This document presents some key information and figures about self-consumption from photovoltaic power plants and cogeneration plants in Germany: definition and regulatory conditions of self-consumption, share of self-consumption in the overall electricity consumption, legal aspects and feed-in tariffs, grid parity achievement and modification of the support system, financial incentives for households, tertiary sector and industry, legal aspects of direct consumption by third parties, opportunities and challenges of PV self-consumption, citizens and companies commitment in energy transition, technical challenges, impact on grid dimensioning, challenge of storage on electric system optimisation, economic impact and 'lack of solidarity', summary and recommendations

Promoting Equal Access of Girls/Women to Technical and Vocational Education.

Science.gov (United States)

Mishra, Arun; Khanna, Pinki; Shrivastava, Nalini

Despite United Nations' efforts, inequality of access for girls and women to technical and vocational education (TVE) persists in India. Challenges of the 21st century with regard to ensuring equal access of girls and women to TVE include: increasing the participation of girls (especially rural girls) in TVE; overcoming gender bias and…

Downcast Enrollments: A Desperate Need of Holistic Marketing for Technical Education

OpenAIRE

Mahajan, Prashant; Golahit, Suresh

2017-01-01

International audience; Purpose: Modern history has shown that only those countries, which could acquire capability to develop and apply science and technology, have found great success to grow their wealth and improve living conditions of their population. Technical education in India contributes a major share to the overall education system and plays a vital role in the social and economic development of the nation. There is a rapid growth of technical education in last decade in terms of t...

Technical review of externalities issues. Final report

International Nuclear Information System (INIS)

Niemeyer, V.

1994-12-01

Externalities has become the catchword for a major experiment in electric utility regulation. Together with increased competition as a means for economic regulation, this experiment represents a potential revolution in how electric utilities are regulated. It is very important for utilities and policy makers to understand the technical issues and arguments driving the externality experiment. This Technical Review presents four papers covering topics in economics that may play important roles in this revolution. The four papers are: Economic Issues in the Application of Externalities to Electricity Resource Selection; Climate Change, the Marginal Cost of Carbon Dioxide Emissions and the Implications for Carbon Dioxide Emissions Adders; Positive Externalities and Benefits from Electricity; and Socioeconomic Effects of Externality Adders for Electric Utility Emissions

Social media and pharmacovigilance: A review of the opportunities and challenges.

Science.gov (United States)

Sloane, Richard; Osanlou, Orod; Lewis, David; Bollegala, Danushka; Maskell, Simon; Pirmohamed, Munir

2015-10-01

Adverse drug reactions come at a considerable cost on society. Social media are a potentially invaluable reservoir of information for pharmacovigilance, yet their true value remains to be fully understood. In order to realize the benefits social media holds, a number of technical, regulatory and ethical challenges remain to be addressed. We outline these key challenges identifying relevant current research and present possible solutions. © 2015 The British Pharmacological Society.

Engaging Local Stakeholders on Technical Issues: Test Case at the La Hague Reprocessing Plant - 59211

International Nuclear Information System (INIS)

Gilli, Ludivine

2012-01-01

In 2009 and 2010, the Institute for Nuclear Safety and Radiation Protection (IRSN) lead a pilot action dealing with the decommissioning of a workshop located on the site of Areva's La Hague fuel-reprocessing plant site in Northwestern France. The purpose of the pilot program was to test ways for IRSN and a few local stakeholders (Non-Governmental Organizations (NGOs) members, local elected officials, etc.) to engage in technical discussions. The discussions were intended to enable the local stakeholders to review the operator's decommissioning application and provide input. The pilot program confirmed there is a definite challenge in successfully opening a meaningful dialogue to discuss technical issues. Three factors influence the extent of the challenge: the knowledge gap between experts and local stakeholders, the conflict between transparency and confidentiality which is inherent with technical topics, and the difficulty for an official expertise institute to hold a dialogue with 'outsiders' during an ongoing reviewing process in which it is participating. The pilot program, given its mixed results, also provided valuable lessons for further improvement of stakeholders' involvement. (authors)

Technical assistance contractor management plan: Surface and ground water

International Nuclear Information System (INIS)

1994-09-01

This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC's mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel

Technical assistance contractor management plan: Surface and ground water

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC`s mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel.

Predictors of employer satisfaction: technical and non-technical skills.

Science.gov (United States)

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Starting an Actuarial Science Major at a Liberal Arts College

Science.gov (United States)

Mills, Mark A.

2014-01-01

The article provides details of the process of starting an actuarial science major at a small, liberal arts college. Some critique of the major is included, as well as some challenges that may be faced by others wanting to start such a major at their institution.

Technical standards in the law of technical safety

International Nuclear Information System (INIS)

Marburger, P.

1985-01-01

Technical standards are of great importance for the closer definition of inexact terms of law, for instance ''generally accepted technical rules'', ''state of the art'', ''state of science and technology'' or similar normative terms, in the law of technical safety. The paper discusses with whom the authority for regulating this sector of law rests, deals with the different ways of how technical standards are used by the law (''anticipated expert opinion'', reference to such standards in law and administration) and points out demands on the procedure of standardization. (orig.) [de

The boomer challenge.

Science.gov (United States)

Barr, Paul

2014-01-01

Hospitals and the rest of health care will have to make some major adjustments to meet the needs of the aging baby boom generation. The first article in our year-long series inventories the many challenges that lie ahead.

The Grand Challenges of Nanotechnology

International Nuclear Information System (INIS)

Lane, Neal

2001-01-01

Amazing breakthroughs and advances continue to be made in nanoscale science and engineering and the rapidly emerging field of nanotechnology, including near-commercial applications in biomedicine, computing and environmental protection. The National Nanotechnology Initiative, begun by the Clinton Administration has placed nanoscale research on a new funding trajectory. But, many 'grand challenges' must be overcome, technical ones as well as those related to funding, science and technology workforce, and the need for stronger collaboration across discipline, organizations, government agencies and with other countries

U.S. SOCOM Grand Challenge #3: NREL Technical Roadmap for a Man-Portable Power Supply System for TALOS

Energy Technology Data Exchange (ETDEWEB)

Ainsworth, Nathan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heaps, Colton [National Renewable Energy Lab. (NREL), Golden, CO (United States); Symko-Davies, Martha [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cale, James [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-06-01

The purpose of this report is to propose a technical roadmap for power supply technology to power the Tactical Assault Light Operator Suit (TALOS), an armored, powered exoskeleton currently in development for U.S. Special Operations Command operators. TALOS' power supply system must meet size targets similar to the size of a large backpack while providing significant electrical power for an entire mission cycle without resupply. This report proposes a staged development path based on three fundamental technical approaches.

Environmental data quality problems: ''Technical'' vs. ''legal'' defensibility

International Nuclear Information System (INIS)

Luker, R.S.; Brooks, M.C.; Stagg, D.D.

1995-01-01

Two significant aspects of environmental data quality are currently being emphasized throughout the industry as critical precursors to environmental decision making: technical integrity and legal defensibility. Because audit findings and consequent perceptions by a client often pose more questions than answers--especially with respect to the ''systemic'' nature and significance of problems based on nonstatistical, ad hoc sampling of large programs--quality assurance in environmental restoration must do more than implement traditional administrative controls. A major problem persists in achieving a consensus opinion between quality assurance and technical staff on the significance of various data problems. This case study compares and contrasts ''technical integrity'' and ''legal defensibility'', and provides performance measures developed to optimize both components in a large, complex DOE environmental restoration program. Performance measures of both administrative and technical processes are being used to ensure that conclusions drawn concerning ''systematic'' problems are not premature, and are founded on thorough, representative aspects of the program. Improved methods to reach consensus opinions on environmental decision-making are imperative and environmental data quality, the cornerstone on which the decisions are built, must be not only scientifically solid, but perceived as solid, if stakeholders are to be satisfied

The challenges and benefits of lunar exploration

Science.gov (United States)

Cohen, Aaron

1992-01-01

Three decades into the Space Age, the United States is experiencing a fundamental shift in space policy with the adoption of a broad national goal to expand human presence and activity beyond Earth orbit and out into the Solar System. These plans mark a turning point in American space exploration, for they entail a shift away from singular forays to a long-term, evolutionary program of exploration and utilization of space. No longer limited to the technical and operational specifics of any one vehicle or any one mission plan, this new approach will involve a fleet of spacecraft and a stable of off-planet research laboratories, industrial facilities, and exploration programs. The challenges inherent in this program are immense, but so too are the benefits. Central to this new space architecture is the concept of using a lunar base for in-situ resource utilization, and for the development of planetary surface exploration systems, applicable to the Moon, Mars, and other planetary bodies in the Solar System. This paper discusses the technical, economic, and political challenges involved in this new approach, and details the latest thinking on the benefits that could come from bold new endeavors on the final frontier.

Involving other communities through challenges and cooperation

CERN Document Server

Nellist, Clara; The ATLAS collaboration

2015-01-01

The ATLAS collaboration has recently setup three projects targeting citizen science or specific communities : The goal of the HiggsML project was to bring particle physicists and data scientists together through a challenge: compete online to obtain the best Higgs to tau tau signal significance on a set of ATLAS fully simulated signal and background. The challenge ran from May to September 2014, drawing considerable attention. In total, there were 1785 teams that participated, making it the most popular challenge at the time on the Kaggle platform. The ATLAS@home project allows volunteers to run simulations of collisions in the ATLAS detector. During the first year the community mostly consisted of software fans, who were attracted by the technical challenge and contributed greatly to the debugging through the message boards on the website. With the start of LHC, the number of people attracted for outreach reasons grew. Higgs Hunters is the first Particle Physics project hosted on the web-based citizen scienc...

Environmental radiation protection-future challenges with regard to science and decision-making

International Nuclear Information System (INIS)

Larsson, C. M.

2004-01-01

With Publication 91 on the impact of ionizing radiation on non-human species, the International Commission on Radiological Protection (ICRP) has taken a major step towards the integration of environmental issues into radiological protection. The conceptual framework has developed in response to public demand and concern for environmental issues, and is underpinned by technical development undertaken by several organisations at both national and international levels. The EC-funded FASSET project (Framework for Assessment of Environmental Impact), completed in 2004, has developed an assessment framework that includes: source characterisation and initial hazard analysis; ecosystem description and selection of reference organisms; exposure analysis including conversion to dose rates; effects analysis; and, guidance for interpretation. On the basis of experience from FASSET and other recent developments, it can be concluded that (i) there is substantial agreement in terms of conceptual approaches between different frameworks currently in use being or proposed, and that (ii) differences in technical approaches can be largely attributed to differences in ecosystems of concern or in national regulatory requirements. A major future challenge is the development of an integrated approach where decision-making can be guided by sound scientific judgements. This requires, inter alia: filling gaps in basic knowledge of relevance to assessment and protection, through targeted experimental, theoretical (including expert judgements) and real case studies; development of risk characterisation methodologies; development of screening standards, where appropriate; development of user-friendly assessment tools; and, stakeholder involvement, including the development of supporting communication strategies. These issues will be addressed in the ERICA project (Environmental Risks from Ionizing Contaminants Assessment and Management) launched under the EC 6th Framework Programme during the

Challenges to Resistance Welding

DEFF Research Database (Denmark)

Song, Quanfeng

This report originates from the compulsory defense during my Ph.D. study at the Technical University of Denmark. Resistance welding is an old and well-proven technology. Yet the emergence of more and more new materials, new designs, invention off new joining techniques, and more stringent...... requirement in quality have imposed challenges to the resistance welding. More some research and development have to be done to adapt the old technology to the manufacturing industry of the 21st century. In the 1st part of the report, the challenging factors to the resistance welding are reviewed. Numerical...... simulation of resistance welding has been under development for many years. Yet it is no easy to make simulation results reliable and accurate because of the complexity of resistance welding process. In the 2nd part of the report numerical modeling of resistance welding is reviewed, some critical factors...

Challenges for Deep Vadose Zone Remediation at the Hanford Site

International Nuclear Information System (INIS)

Morse, John G.; Charboneau, Briant L.; Lober, Robert W.; Triplett, Mark B.

2008-01-01

The 'deep vadose zone' is defined as the region below the practical depth of surface remedy influence (e.g., excavation or barrier). At the Hanford Site, this region of the Central Plateau poses unique challenges for characterization and remediation. The contaminants in this region also pose a potentially significant continuing or future threat to groundwater. Currently, deep vadose zone characterization efforts and remedy selection are spread over multiple waste site Operable Units and tank farm Waste Management Areas. A particular challenge for this effort is the situation in which past leaks from single-shell tanks have become commingled with discharges from nearby liquid disposal sites. The Hanford Site is working with all affected parties, including the Washington State Department of Ecology, the Environmental Protection Agency, DOE-RL, DOE-ORP, and multiple contractor organizations to develop a unified approach to conducting work and reaching remediation decisions. This effort addresses the complex and challenging technical and regulatory issues within this environment. A true inter-Agency effort is evaluating the best strategy or combination of strategies for focusing technical investigations, including treatability studies, and for attaining remedy decisions on the Hanford Site

Challenges of deploying nuclear energy for power generation in Malaysia

Science.gov (United States)

Jaafar, Mohd Zamzam; Nazaruddin, Nurul Huda; Lye, Jonathan Tan Thiam

2017-01-01

Under the 10th Malaysia Plan (2010-2015) and the Economic Transformation Programme (ETP), nuclear energy was identified as a potential long-term option to be explored for electricity generation in Peninsular Malaysia. The energy sector in Malaysia currently faces several concerns including depleting domestic gas supply which will affect security and reliability of supply as well as overdependance on fossil fuels - mainly gas and imported coal, and nuclear energy may offer a possible solution to these issues as well as global climate change concern. Pursuing the nuclear option, Malaysia Nuclear Power Corporation (MNPC) is undertaking a series of comprehensive studies to facilitate an informed Government decision on the matter. This paper aims to discuss the many challenges towards the peaceful use of nuclear energy for electricity generation in the context of the New Energy Policy 2010 to achieve a balanced and sustainable energy mix. This effort will continue in the 11th Malaysia Plan (2016-2020) with emphasis on implementing a comprehensive communications plan and public awareness programme for the potential use of nuclear energy in the future. In analysing the challenges for the development of nuclear energy in Malaysia, the traditional triple bottom line (TBL) framework for sustainability, encompassing economic, social and environmental objectives is utilized. An additional factor, technical, is also included in the analysis to provide a more holistic view. It is opined that the main challenges of developing nuclear energy for electricity generation in a newcomer country like Malaysia can be attributed primarily to domestic non-technical factors compared to the technical factor.

Verification of Accurate Technical Insight: A Prerequisite for Self-Directed Surgical Training

Science.gov (United States)

Hu, Yinin; Kim, Helen; Mahmutovic, Adela; Choi, Joanna; Le, Ivy; Rasmussen, Sara

2015-01-01

Simulation-based surgical skills training during preclinical education is a persistent challenge due to time constraints of trainees and instructors alike. Self-directed practice is resource-efficient and flexible; however, insight into technical proficiency among trainees is often lacking. The purpose of this study is to prospectively assess the…

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... reliability that were identified in earlier Commission technical conferences. The conference also will discuss...

Glossary of technical terms for the medical technology professionals.

Directory of Open Access Journals (Sweden)

Rafael Felipe García Rodríguez

2014-03-01

Full Text Available The current work is a glossary of technical terms in English language for Medical Health Professionals, has been prepared due to the lack of technical lexicon the students have during and after their university studies, that is, the students have a deficit of technical words which limits their professional competence and accountability. This shortage limits them and makes it a great laboring challenge if they have to work overseas in English-speaking countries. The glossary comprises the main and necessary words which are needed for this type of professional in their field of action. These graduates have a solid knowledge and comprehension of biological, biochemical and biophysical fundamentals in their mother tongue but they do not have the necessary elements in the target language to operate properly. It is a need that they can work appropriately in the spheres of prevention, promotion and health recovery to support a diagnosis, a treatment and a management not only in their mother tongue but in English for their future work.

Vanpooling: the three major approaches

Energy Technology Data Exchange (ETDEWEB)

Sears, P.M.

1979-08-01

The manual provides technical assistance to existing or prospective vanpool sponsors. It is designed to help them promote vanpooling in its three major approaches: employer sponsored, third party sponsored, and driver owned and operated. The first chapter is an overview of vanpooling and a second chapter, on vanpool marketing, is addressed to ridesharing coordinators and others whose responsibilities include the promotion of vanpooling. Some fact sheets on the three approaches provide convenient summaries of the needs and opportunities of each approach and suggest solutions to practical problems likely to be encountered in starting new vanpool programs.

Cooperation of Russian and EU technical support organizations

International Nuclear Information System (INIS)

Kuznetsov, M.V.; Kozlov, Vl.V.; Kapralov, E.Yu.

2007-01-01

Since 1992, the fruitful collaboration of the Russian and Western-European technical support organizations (TSOs) is being continued due to the support of the European Commission. There are two main areas of activities. The first one is more of methodological assistance and enhancing RF TSOs capabilities to support Rostekhnadzor decision making process. Experience and knowledge acquired in this area projects increase RF TSOs capabilities regarding a wide spectrum of safety related issues assessment, in particular safety analyses, reactor vessel embrittlement, application of 'leak before break' concept, severe accident and accident management, fire risk evaluation, etc. The second area is focused on licensing related assessments of EC financed on site assistance projects (modernisations). This area projects promote implementation in Russia a licensing process based on a technical dialogue between operator and regulator as well contributes to transfer of Western practice in assessment of NPPs modernization. The improvement of managerial, scientific and technical capabilities of RF TSO experts may be considered as noteworthy and practical result of the TSOs cooperation. The continuation of such modality of RF and EU TSOs cooperation will be a good basis to cope with present and future challenges faced by TSOs in enhancing nuclear safety. (author)

Challenges and Security in Cloud Computing

Science.gov (United States)

Chang, Hyokyung; Choi, Euiin

People who live in this world want to solve any problems as they happen then. An IT technology called Ubiquitous computing should help the situations easier and we call a technology which makes it even better and powerful cloud computing. Cloud computing, however, is at the stage of the beginning to implement and use and it faces a lot of challenges in technical matters and security issues. This paper looks at the cloud computing security.

Personality, academic majors and performance

DEFF Research Database (Denmark)

Vedel, Anna; Thomsen, Dorthe Kirkegaard; Larsen, Lars

2015-01-01

Personality–performance research typically uses samples of psychology students without questioning their representativeness. The present article reports two studies challenging this practice. Study 1: group differences in the Big Five personality traits were explored between students (N = 1067......) in different academic majors (medicine, psychology, law, economics, political science, science, and arts/humanities), who were tested immediately after university enrolment. Study 2: six and a half years later the students’ academic records were obtained, and predictive validity of the Big Five personality...... traits and their subordinate facets was examined in the various academic majors in relation to Grade Point Average (GPA). Significant group differences in all Big Five personality traits were found between students in different academic majors. Also, variability in predictive validity of the Big Five...

Non-technical approach to the challenges of ecological architecture: Learning from Van der Laan

Directory of Open Access Journals (Sweden)

María-Jesús González-Díaz

2016-06-01

Full Text Available Up to now, ecology has a strong influence on the development of technical and instrumental aspects of architecture, such as renewable and efficient of resources and energy, CO2 emissions, air quality, water reuse, some social and economical aspects. These concepts define the physical keys and codes of the current ׳sustainable׳ architecture, normally instrumental but rarely and insufficiently theorised. But is not there another way of bringing us to nature? We need a theoretical referent. This is where we place the Van der Laan׳s thoughts: he considers that art completes nature and he builds his theoretical discourse on it, trying to better understand many aspects of architecture. From a conceptual point of view, we find in his works sense of timelessness, universality, special attention on the ׳locus׳ and a strict sense of proportions and use of materials according to nature. Could these concepts complement our current sustainable architecture? How did Laan apply the current codes of ecology in his architecture? His work may help us to get a theoretical interpretation of nature and not only physical. This paper develops this idea through the comparison of thoughts and works of Laan with the current technical approach to ׳sustainable׳ architecture.

Preconception carrier screening and prenatal diagnosis in thalassemia and hemoglobinopathies: challenges and future perspectives.

Science.gov (United States)

Traeger-Synodinos, Joanne; Harteveld, Cornelis L

2017-03-01

Hemoglobinopathies constitute the most common severe monogenic disorders worldwide, with an increasing global burden each year. The benefit of applying programmes for preconception carrier screening, with the option of prenatal diagnosis, to minimize the incidence of new cases is recognized in many countries. Areas covered: The challenges associated with identifying carrier couples using hematology-based screening, along with DNA diagnosis and prenatal diagnosis were addressed, based on a literature search and the authors expertise. Expert commentary: The hemoglobinopathies are extremely heterogeneous at the haematological, molecular and clinical level, requiring appropriately equipped and staffed laboratories with experience to support comprehensive screening and diagnosis. However complete services with adequate infrastructure to address the associated technical challenges do not exist widely, especially in low-income countries that, coincidentally, are often those with the highest frequency of hemoglobinopathies in their population. Additionally, overcoming limited public awareness, education and absence of systematic dissemination of information also constitutes a challenge. This article aims to highlight these challenges and to evaluate potential future developments that may address at least some of them, focusing mainly on the technical challenges related to molecular diagnostics.

In Translation: School Leaders Learning in and from Leadership Practice While Confronting Pressing Policy Challenges

Science.gov (United States)

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia

2018-01-01

Background/Context: Worldwide, principals face enormous challenges while translating policies and mandates for which they are accountable into their mission and practice. While some of these school-level challenges are technical, many are adaptive (Heifetz), requiring leaders and those in their care to grow their cognitive and affective…

Technical Issues Map for the NHI System Interface and Support Systems Area: 3rd Quarter FY 07

International Nuclear Information System (INIS)

Steven R. Sherman

2007-01-01

This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway. The technical issues are ranked according to priority and by assumed resolution dates. Due to funding limitations, not all high-priority technical issues are under study at the present time, and more resources will need to be dedicated to tackling such issues in the future. This technical issues map is useful for understanding the relative importance of various technical challenges and will be used as a planning tool by the NHI technical leadership for future work package planning. The technical map in its present form will be discontinued in FY08 and will be folded into a larger NHI System Interface and Support Systems project management plan and scope baseline statement in FY08

Investigating the Molecular Basis of Major Depressive Disorder Etiology

NARCIS (Netherlands)

Jabbi, Mbemba; Korf, Jaalp; Ormel, Johan; Kema, Ido P.; den Boer, Johan A.; Kvetnansky, R; Aguilera, G; Goldstein, D; Jezova, D; Krizanova, O; Sabban, EL; Pacak, K

2008-01-01

Genes play a major role in behavioral adaptation to challenging environmental stimuli, but the complexity of their contribution remains unclear. There is growing evidence linking disease phenotypes with genes on the one hand, and the genesis of stress-related disorders like major depression, as a

Teacher collaborative curriculum design in technical vocational colleges: a strategy for maintaining curriculum consistency?

NARCIS (Netherlands)

Albashiry, N.M.; Voogt, J.M.; Pieters, J.M.

2015-01-01

The Technical Vocational Education and Training (TVET) curriculum requires continuous renewal and constant involvement of stakeholders in the redesign process. Due to a lack of curriculum design expertise, TVET institutions in developing contexts encounter challenges maintaining and advancing the

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

Science.gov (United States)

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Technical co-operation report for 2002. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-08-01

General Conference resolution GC(46)/RES/10 reiterated the need to strengthen the technical co- operation programme and requested the Director General to report to the Board of Governors periodically and to the General Conference at its forty-seventh (2003) session on the implementation of resolution GC(46)/RES/10. Part A of this report responds to the General Conference resolution by providing an overview of the progress achieved in technical co-operation policies, strategies, working relations, and internal management during the period 1 April 2002 to 31 March 2003, as well as the major new challenges facing the technical co-operation programme. Part B reports on operational activities and programme performance at the country and regional levels during the calendar year 2002, and Part C reviews the use of financial and human resources in the programme at an aggregate level. As part of its efforts to refine policies for improving programme development, the Agency reviewed the Technical Co-operation Strategy in 2002. The resulting document, The Technical Co-operation Strategy: the 2002 Review (document GOV/INF/2002/8/Mod.1), states that the strategic goal originally identified in the Strategy in 1997 remains valid, and defines four objectives to guide the technical co-operation programme: applying the central criterion (strong government commitment), developing strategic partnerships, increasing the level of funding for technical co-operation, and promoting greater sustainability and self-reliance of nuclear institutions. In line with the Technical Co-operation Strategy, one of the key features of the Agency.s work in 2002 was continuing consultations with Member States at both the policy and operational levels on the management of the ongoing technical co-operation programme and on planning for future activities. The dialogue with Member States aimed at clarifying the strategic objectives and key tools for the utilization of resources to achieve maximum

The international gas markets. Of major changes and challenges for Europe

International Nuclear Information System (INIS)

Westphal, Kirsten

2014-01-01

Already in the 2010 edition of its World Energy Outlook the World Energy Agency noted an unprecedented degree of uncertainty surrounding the international energy markets. The rate of change in these markets is indeed stupendous, posing formidable tasks to business companies as well as the political leadership. The European gas markets face new challenges in protecting their security of supply which stem from the combined effects of the shift of LNG trade flows into the Pacific region, decreasing rates of home production and the ongoing transformation process within the EU.

Towards Quality Technical Vocational Education and Training (Tvet) Programmes in Nigeria: Challenges and Improvement Strategies

Science.gov (United States)

Ayonmike, Chinyere Shirley; Okwelle, P. Chijioke; Okeke, Benjamin Chukwumaijem

2015-01-01

Technical Vocational Education and Training (TVET) is widely recognized as a vital driving force for the socio-economic growth and technological development of nations. In achieving the goals and objectives of TVET in Nigeria, the quality of the programme needs to be improved and sustained. The purpose of this study is to ascertain the challenges…

Report of the Office of Nuclear Reactor Regulation technical assistance task force

International Nuclear Information System (INIS)

1981-11-01

In 1981, the Director of the Office of Nuclear Reactor Regulation (NRR) of the Nuclear Regulatory Commission (NRC) chartered a task force to assess the office program of technical assistance and to recommend improvements. The task force divided the technical assistance program into four areas, and the practices in each area were assessed through a series of surveys of staff, management, and contractor personnel. The task force placed emphasis in its interview and assessment process on the problem areas that exist in the technical assistance program. The report thus reflects a weight on the faults found as a result of the inquiries made. The four major areas of technical assistance contracting studied were program planning, program management and execution, program control and management information systems, and program administration and coordination

NASA Scientific and Technical Publications: A Catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers 1987-1990

Science.gov (United States)

1991-02-01

Technical Papers present the results of significant research conducted by NASA scientists and engineers. Presented here are citations for reports from each...CSCL contains photographs of 322 galaxies including the majority of all 03A Shapley-Ames bright galaxies, plus cluster members in the Virgo A...Catalog of Open Clusters and Associated Interstellar Matter Research Council, London, United Kingdom Sponsored by NASA, summarizes observations of 128 open

A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

Science.gov (United States)

Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

2012-01-01

Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

International Nuclear Information System (INIS)

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

Recent technical developments in radiographic and ultrasonic examinations of the mammary glands

Energy Technology Data Exchange (ETDEWEB)

Friedrich, M

1981-05-01

Apart from the improved film-foil combinations the major innovation in mammography is the scanning technique which enables high-quality mammograms to be made especially of thicker objects of higher density. It has already become the method of choice for screening examinations in the major preventive-care centres for breast cancer. Magnification mammography, on the other hand, has some technical drawbacks and is only used as a supplementary technique of examination. Even though it has not yet reached technical maturity, sonography of the mammary glands already plays an important role as an auxiliary or complementary technique, especially to clear up ambiguous palpatory or mammographic findings. It has only limited value in early detection of breast cancer and should therefore be used only as a supplementary technique.

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2013-05-13

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013 from 9:00 a.m. to 5:00 p.m. This... technical support for webcasts and offers the option of listening to the meeting via phone-bridge for a fee...

Experimental Facilities Division/User Program Division technical progress report 1999-2000

International Nuclear Information System (INIS)

2001-01-01

In October 1999, the two divisions of the Advanced Photon Source (APS), the Accelerator Systems Division (ASD) and the Experimental Facilities Division (XFD), were reorganized into four divisions (see high-level APS organizational chart, Fig. 1.1). In addition to ASD and XFD, two new divisions were created, the APS Operations Division (AOD), to oversee APS operations, and the User Program Division (UPD), to serve the APS user community by developing and maintaining the highest quality user technical and administration support. Previous XFD Progress Reports (ANL/APS/TB-30 and ANL/APS/TB-34) covered a much broader base, including APS user administrative support and what was previously XFD operations (front ends, interlocks, etc.) This Progress Report summarizes the main scientific and technical activities of XFD, and the technical support, research and development (R and D) activities of UPD from October 1998 through November 2000. The report is divided into four major sections, (1) Introduction, (2) SRI-CAT Beamlines, Technical Developments, and Scientific Applications, (3) User Technical Support, and (4) Major Plans for the Future. Sections 2 and 3 describe the technical activities and research accomplishments of the XFD and UPD personnel in supporting the synchrotron radiation instrumentation (SRI) collaborative access team (CAT) and the general APS user community. Also included in this report is a comprehensive list of publications (Appendix 1) and presentations (Appendix 2) by XFD and UPD staff during the time period covered by this report. The organization of section 2, SRI CAT Beamlines, Technical Developments, and Scientific Applications has been made along scientific techniques/disciplines and not ''geographical'' boundaries of the sectors in which the work was performed. Therefore items under the subsection X-ray Imaging and Microfocusing could have been (and were) performed on several different beamlines by staff in different divisions. The management of

Data Sharing: Convert Challenges into Opportunities

Directory of Open Access Journals (Sweden)

Ana Sofia Figueiredo

2017-12-01

Full Text Available Initiatives for sharing research data are opportunities to increase the pace of knowledge discovery and scientific progress. The reuse of research data has the potential to avoid the duplication of data sets and to bring new views from multiple analysis of the same data set. For example, the study of genomic variations associated with cancer profits from the universal collection of such data and helps in selecting the most appropriate therapy for a specific patient. However, data sharing poses challenges to the scientific community. These challenges are of ethical, cultural, legal, financial, or technical nature. This article reviews the impact that data sharing has in science and society and presents guidelines to improve the efficient sharing of research data.

Big Data Provenance: Challenges, State of the Art and Opportunities.

Science.gov (United States)

Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

2015-01-01

Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and utilization. This paper discusses the challenges and opportunities of Big Data provenance related to the veracity of the datasets themselves and the provenance of the analytical processes that analyze these datasets. It also explains our current efforts towards tracking and utilizing Big Data provenance using workflows as a programming model to analyze Big Data.

Extracorporeal photopheresis: Review of technical aspects.

Science.gov (United States)

Arora, Satyam; Setia, Rasika

2017-01-01

Extracorporeal photochemotherapy (ECP) is considered as an immune modulating therapy majorly targeting the T cells of the Immune system. ECP induces an anti-inflammatory condition with tolerogenic responses without inducing a global immunosuppression state which is a typical feature of other therapeutic options such as steroids. Clinical indication of ECP has grown over time since its initial applications. Our review discusses the technical aspects of the concept of photopheresis with the available methods for its clinical applications.

The challenge of global warming

International Nuclear Information System (INIS)

Bryner, G.C.

1992-01-01

The chapter outlines the science of global warming, the likely consequences of global warming and some of the major challenges in dealing with global climate change. Some of the major international organisations concerned with environmental issues are listed. International agreements might be used to limit emissions of greenhouse gases. 32 refs., 2 tabs

An investigation on the technical standard strategy for China's manufacturing industry

International Nuclear Information System (INIS)

Ma Limin; Jiang Xiangqian; Xu Zhengao; Li Zhu

2005-01-01

China's manufacturing industry is now the 4th largest manufacturing power in the world, second only to the US, Japan, and Germany. Large but not strong, it is still way behind developed countries. In the technical standard field, the gap between China's manufacturing industry and industrially developed countries is showing that there is a low level of technological standards and lack of professional talent versed in technical standards. A technical standards strategy is of importance to the development of China's manufacturing industry has been as one of the major strategies in the 10th Five-Year Plan period. The overall objective of the strategy for China's technical standards should be capable of supporting Chinese enterprises and products in entering the international market and ensuring the superiority of China's key industries in international competition. The implementing tactics of the strategy are all-round tracking, effective adoption, crucial participation, and strong dominance

Technical challenges related to implementation of a formula one real time data acquisition and analysis system in a paediatric intensive care unit.

Science.gov (United States)

Matam, B Rajeswari; Duncan, Heather

2018-06-01

Most existing, expert monitoring systems do not provide the real time continuous analysis of the monitored physiological data that is necessary to detect transient or combined vital sign indicators nor do they provide long term storage of the data for retrospective analyses. In this paper we examine the feasibility of implementing a long term data storage system which has the ability to incorporate real-time data analytics, the system design, report the main technical issues encountered, the solutions implemented and the statistics of the data recorded. McLaren Electronic Systems expertise used to continually monitor and analyse the data from F1 racing cars in real time was utilised to implement a similar real-time data recording platform system adapted with real time analytics to suit the requirements of the intensive care environment. We encountered many technical (hardware and software) implementation challenges. However there were many advantages of the system once it was operational. They include: (1) The ability to store the data for long periods of time enabling access to historical physiological data. (2) The ability to alter the time axis to contract or expand periods of interest. (3) The ability to store and review ECG morphology retrospectively. (4) Detailed post event (cardiac/respiratory arrest or other clinically significant deteriorations in patients) data can be reviewed clinically as opposed to trend data providing valuable clinical insight. Informed mortality and morbidity reviews can be conducted. (5) Storage of waveform data capture to use for algorithm development for adaptive early warning systems. Recording data from bed-side monitors in intensive care/wards is feasible. It is possible to set up real time data recording and long term storage systems. These systems in future can be improved with additional patient specific metrics which predict the status of a patient thus paving the way for real time predictive monitoring.

Science and the major racket sports: a review.

Science.gov (United States)

Lees, Adrian

2003-09-01

The major racket sports include badminton, squash, table tennis and tennis. The growth of sports science and the commercialization of racket sports in recent years have focused attention on improved performance and this has led to a more detailed study and understanding of all aspects of racket sports. The aim here, therefore, is to review recent developments of the application of science to racket sports. The scientific disciplines of sports physiology and nutrition, notational analysis, sports biomechanics, sports medicine, sports engineering, sports psychology and motor skills are briefly considered in turn. It is evident from these reviews that a great deal of scientific endeavour has been applied to racket sports, but this is variable across both the racket sports and the scientific disciplines. A scientific approach has helped to: implement training programmes to improve players' fitness; guide players in nutritional and psychological preparation for play; inform players of the strategy and tactics used by themselves and their opponents; provide insight into the technical performance of skills; understand the effect of equipment on play; and accelerate the recovery from racket-arm injuries. Racket sports have also posed a unique challenge to scientists and have provided vehicles for developing scientific methodology. Racket sports provide a good model for investigating the interplay between aerobic and anaerobic metabolism and the effect of nutrition, heat and fatigue on performance. They have driven the development of mathematical solutions for multi-segment interactions within the racket arm during the performance of shots, which have contributed to our understanding of the mechanisms of both performance and injury. They have provided a unique challenge to sports engineers in relation to equipment performance and interaction with the player. Racket sports have encouraged developments in notational analysis both in terms of analytical procedures and the

The medical leadership challenge in healthcare is an identity challenge.

Science.gov (United States)

Andersson, Thomas

2015-01-01

The purpose of this article is to describe and analyse the identity challenges that physicians with medical leadership positions face. Four qualitative case studies were performed to address the fact that identity is processual, relational and situational. Physicians with managerial roles were interviewed, as well as their peers, supervisors and subordinates. Furthermore, observations were made to understand how different identities are displayed in action. This study illustrates that medical leadership implies identity struggles when physicians have manager positions, because of the different characteristics of the social identities of managers and physicians. Major differences are related between physicians as autonomous individuals in a system and managers as subordinates to the organizational system. There are psychological mechanisms that evoke the physician identity more often than the managerial identity among physicians who are managers, which explains why physicians who are managers tend to remain foremost physicians. The implications of the findings, that there are major identity challenges by being both a physician and manager, suggest that managerial physicians might not be the best prerequisite for medical leadership, but instead, cooperative relationships between physicians and non-physician managers might be a less difficult way to support medical leadership. Acknowledging and addressing identity challenges can be important both in creating structures in organizations and designing the training for managers in healthcare (both physicians and non-physicians) to support medical leadership. Medical leadership is most often related to organizational structure and/or leadership skills, but this paper discusses identity requirements and challenges related to medical leadership.

METHOD IMPROVEMENT FOR DETERMINING THE TECHNICAL LEVEL OF CIVIL AIRCRAFT

Directory of Open Access Journals (Sweden)

2016-01-01

Full Text Available Aircraft are high-tech engineering products which are characterized by a wide range of properties including the two most important groups that respectively characterize the efficiency and technical level.Improving the aircraft efficiency is an essential factor for air transport development, but the efficiency can not be fully describe the technical system, especially in forecasting and new technology requirements development. Aircraft de- signer must evaluate the prospects of a technical solution, but it’s not always possible to calculate the efficiency accuratelyat the design stage. The operator should be able to choose the most technically-advanced aircraft available in the market inorder not to let it grow obsolete quickly. This determines the need for non-economic evaluation of technical systems that can be done by assessment of their technical level.The technical level is a general index that includes a set of technical perfection indicators. Technical perfection is reflected in terms of material and energy intensity, in terms of ergonomics, safety, etc. and is achieved as a result of origi- nal design solutions, the use of new high-strength low-density materials, the introduction of advanced technological pro-cesses, calculation methods, verification, testing, etc.There is a tight connection between the product properties and its weight, because weight is the material reflection of these properties. Therefore, improvement of the product properties usually leads to an intense increase of its weight. To deal with this phenomenon is only possible with widely using scientific and technical progress results. In accordance with this, the technical perfection can be interpreted as a major component of quality that is created without the weight increase. This approach requires investment in research and testing new technical solutions.The method was developed to determine the technical level of civil long-haul aircraft which has been modified to

DOE Advanced Scientific Computing Advisory Subcommittee (ASCAC) Report: Top Ten Exascale Research Challenges

Energy Technology Data Exchange (ETDEWEB)

Lucas, Robert [University of Southern California, Information Sciences Institute; Ang, James [Sandia National Laboratories; Bergman, Keren [Columbia University; Borkar, Shekhar [Intel; Carlson, William [Institute for Defense Analyses; Carrington, Laura [University of California, San Diego; Chiu, George [IBM; Colwell, Robert [DARPA; Dally, William [NVIDIA; Dongarra, Jack [University of Tennessee; Geist, Al [Oak Ridge National Laboratory; Haring, Rud [IBM; Hittinger, Jeffrey [Lawrence Livermore National Laboratory; Hoisie, Adolfy [Pacific Northwest National Laboratory; Klein, Dean Micron; Kogge, Peter [University of Notre Dame; Lethin, Richard [Reservoir Labs; Sarkar, Vivek [Rice University; Schreiber, Robert [Hewlett Packard; Shalf, John [Lawrence Berkeley National Laboratory; Sterling, Thomas [Indiana University; Stevens, Rick [Argonne National Laboratory; Bashor, Jon [Lawrence Berkeley National Laboratory; Brightwell, Ron [Sandia National Laboratories; Coteus, Paul [IBM; Debenedictus, Erik [Sandia National Laboratories; Hiller, Jon [Science and Technology Associates; Kim, K. H. [IBM; Langston, Harper [Reservoir Labs; Murphy, Richard Micron; Webster, Clayton [Oak Ridge National Laboratory; Wild, Stefan [Argonne National Laboratory; Grider, Gary [Los Alamos National Laboratory; Ross, Rob [Argonne National Laboratory; Leyffer, Sven [Argonne National Laboratory; Laros III, James [Sandia National Laboratories

2014-02-10

Exascale computing systems are essential for the scientific fields that will transform the 21st century global economy, including energy, biotechnology, nanotechnology, and materials science. Progress in these fields is predicated on the ability to perform advanced scientific and engineering simulations, and analyze the deluge of data. On July 29, 2013, ASCAC was charged by Patricia Dehmer, the Acting Director of the Office of Science, to assemble a subcommittee to provide advice on exascale computing. This subcommittee was directed to return a list of no more than ten technical approaches (hardware and software) that will enable the development of a system that achieves the Department's goals for exascale computing. Numerous reports over the past few years have documented the technical challenges and the non¬-viability of simply scaling existing computer designs to reach exascale. The technical challenges revolve around energy consumption, memory performance, resilience, extreme concurrency, and big data. Drawing from these reports and more recent experience, this ASCAC subcommittee has identified the top ten computing technology advancements that are critical to making a capable, economically viable, exascale system.

Electricity of the future: a worldwide challenge

International Nuclear Information System (INIS)

De Ladoucette, Ph.; Chevalier, J.M.; Barbaso, F.; Becache, P.; Belmans, P.; Brottes, F.; Chevet, P.F.; Chone, F.; David, A.; Delorme, Ph.; Hadjsaid, N.; Jalabert, M.; Julliard, Y.; Kott, B.; Lenoir, J.C.; Lewiner, C.; Maillard, D.; Moisan, F.; Pelletier, Ph.; Poniatowski, L.; Rozes, St.; Rytoft, C.; Sanchez Jimenez, M.; Seyrling, G.; Vu, A.

2010-01-01

The increase of power consumption, the development of renewable energy sources and the emergence of new usages like the electric-powered car are as many challenges that put the reliability and the reactivity of our power grids to the test. These grids have to change to become 'intelligent' thanks to the integration of new information and communication technologies over the overall supply chain, from the energy generation to its end use by consumers. For the first time in France, the actors of this change explain their opinion about this revolution and put it in perspective with its full extent and complexity. Changing power grids to make them intelligent is first of all a technical challenge but also a society challenge: the consumer will become an actor involved in the mastery of his energy demand and a renewable energy producer capable to interact with the grid in an increasing manner. This worldwide change that we are going to be the witnesses comes up against numerous obstacles. The aim of this book is to examine the determining factors of the success of this large scale change through its technical, economical and social dimensions. It shows that the emergence of such an advanced power system cannot be possible neither without the reconciliation between some contradictory goals, nor without a strong coordination between the actors. Content: Part 1 - intelligent power networks to answer the 21. century challenges: 1 - the European and French dimension of the electric power sector; 2 - towards a carbon-free economy; 3 - a power grid facing new challenges; 4 - the pre-figuration of intelligent power grids; 5 - the deployment of intelligent (smart) grids; Part 2 - perspectives of smart grids development: 1 - the future of power networks; 2 - a new industrial era; Part 3 - the consumer's position in the deployment of future grids: 1 - changing behaviours; 2 - making the consumer a 'consum'actor'. Synthesis and conclusion. (J.S.)

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

Energy Technology Data Exchange (ETDEWEB)

Davidson, Ronald C.

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance

Directory of Open Access Journals (Sweden)

Jessica Dawson

2018-06-01

Full Text Available One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance.

Science.gov (United States)

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

American Samoa Initial Technical Assessment Report

Energy Technology Data Exchange (ETDEWEB)

Busche, S.; Conrad, M.; Funk, K.; Kandt, A.; McNutt, P.

2011-09-01

This document is an initial energy assessment for American Samoa, the first of many steps in developing a comprehensive energy strategy. On March 1, 2010, Assistant Secretary of the Interior Tony Babauta invited governors and their staff from the Interior Insular Areas to meet with senior principals at the National Renewable Energy Laboratory (NREL). Meeting discussions focused on ways to improve energy efficiency and increase the deployment of renewable energy technologies in the U.S. Pacific Territories. In attendance were Governors Felix Camacho (Guam), Benigno Fitial (Commonwealth of the Northern Mariana Islands), and Togiola Tulafono, (American Samoa). This meeting brought together major stakeholders to learn and understand the importance of developing a comprehensive strategic plan for implementing energy efficiency measures and renewable energy technologies. For several decades, dependence on fossil fuels and the burden of high oil prices have been a major concern but never more at the forefront as today. With unstable oil prices, the volatility of fuel supply and the economic instability in American Samoa, energy issues are a high priority. In short, energy security is critical to American Samoa's future economic development and sustainability. Under an interagency agreement, funded by the Department of Interior's Office of Insular Affairs, NREL was tasked to deliver technical assistance to the islands of American Samoa. Technical assistance included conducting an initial technical assessment to define energy consumption and production data, establish an energy consumption baseline, and assist with the development of a strategic plan. The assessment and strategic plan will be used to assist with the transition to a cleaner energy economy. NREL provided an interdisciplinary team to cover each relevant technical area for the initial energy assessments. Experts in the following disciplines traveled to American Samoa for on-island site assessments: (1

Egyptian And International Automotive Diesel. Fuels: Specifications Meeting Challenges To Refining Industry

International Nuclear Information System (INIS)

Zayed, A.M.; EI Shamy, A.A.

2004-01-01

This paper presents a brief summary and comparison of Egyptian automotive diesel fuel to the international one. Recent legislation all over the world, requiring further reduction in sulfur, aromatics, T 90 and T 95 and increasing cetane value of the transportation diesel fuels, presents numerous technical and economic challenges to the refiners. While refiners grapple with these challenges, they will also face pressure from the increased demand of transportation diesel fuel and tighter capital restrictions. Overcome of these challenges makes a fair competition. A comparison of the Egyptian automotive diesel fuel and the international one will be a guide to locally and globally facing these challenges

A review of technical options for solar charging stations in Asia and Africa

Directory of Open Access Journals (Sweden)

R. H. Almeida

2015-09-01

Full Text Available Charging stations are an attractive solution to provide access to electricity to low income populations with low energy consumption in remote and off-grid areas. This paper reviews the state of the art of charging stations, with special focus on the technical options. Forty-five different actors in this field were analysed, based on academic publications, reports, online search and surveys. Results show that most stations are run in Sub Saharan Africa and South Asia, are powered by solar energy and although there are many different energy services targeted, the most popular services are charging batteries, mobile phones and lamps. The first charging station was installed in 1992 but most activities happen after 2005. This recent growth has been enabled by the falling cost of photovoltaic modules, learning effect, economies of scale, financial innovation, private sector involvement and worldwide dissemination of mobile phones. While in the first system the only purpose was to charge solar photovoltaic lanterns, the first multi-purpose station appeared in 2008. As expected, the technical challenges are mostly related to the use of batteries not only because they represent the component with shortest lifetime but also because if the battery is not for individual use, social questions arise due to poor definition of rights and duties of the customers. Furthermore, the development of a sustainable business model is also a challenge since this requires technical skills and system monitoring that are not usually available locally. Finally, it is also suggested that the minimum technical quality standards for charging stations should be defined and implemented.

Aircraft digital flight control technical review

Science.gov (United States)

Davenport, Otha B.; Leggett, David B.

1993-01-01

The Aircraft Digital Flight Control Technical Review was initiated by two pilot induced oscillation (PIO) incidents in the spring and summer of 1992. Maj. Gen. Franklin (PEO) wondered why the Air Force development process for digital flight control systems was not preventing PIO problems. Consequently, a technical review team was formed to examine the development process and determine why PIO problems continued to occur. The team was also to identify the 'best practices' used in the various programs. The charter of the team was to focus on the PIO problem, assess the current development process, and document the 'best practices.' The team reviewed all major USAF aircraft programs with digital flight controls, specifically, the F-15E, F-16C/D, F-22, F-111, C-17, and B-2. The team interviewed contractor, System Program Office (SPO), and Combined Test Force (CTF) personnel on these programs. The team also went to NAS Patuxent River to interview USN personnel about the F/A-18 program. The team also reviewed experimental USAF and NASA systems with digital flight control systems: X-29, X-31, F-15 STOL and Maneuver Technology Demonstrator (SMTD), and the Variable In-Flight Stability Test Aircraft (VISTA). The team also discussed the problem with other experts in the field including Ralph Smith and personnel from Calspan. The major conclusions and recommendations from the review are presented.

Development of nuclear technology through International Technical Cooperation programme: Malaysian experience

International Nuclear Information System (INIS)

Ainul Hayati Daud

1997-01-01

In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996

The challenge of the radioactive waste management

International Nuclear Information System (INIS)

Dupuis, M. C.

2008-01-01

The problem of waste management has gained relevance with the development of electronuclear production and the increased social awareness on the need to protect the environment. While most developed countries have found solutions for the disposal of waste of low intensity and duration, the storage of used fuel and other kind of waste of higher intensity and duration is one of the main challenges for the next decade. Scientific research focuses on long term safety, while questions on the need for new governance are raised at the socio political level. Organizations such as the AEN have strengthened international cooperation to overcome the scientific, technical and socio-political challenges related to the nuclear waste management. (Author) 15 refs

Transistor challenges - A DRAM perspective

International Nuclear Information System (INIS)

Faul, Juergen W.; Henke, Dietmar

2005-01-01

Key challenges of the transistor scaling from a DRAM perspective will be reviewed. Both, array transistors as well as DRAM support devices face challenges that differ essentially from high performance logic device scaling. As a major difference, retention time and standby current requirements characterize special boundary conditions in the DRAM device design. Array device scaling is determined by a chip size driven aggressive node scaling. To continue scaling, major innovations need to be introduced into state-of-the-art planar array transistors. Alternatively, non planar device concepts will have to be evaluated. Support device design for DRAMs is driven by today's market demand for increased chip performances at little to no extra cost. Major innovations are required to continue that path. Besides this strive for performance increase, special limitations for 'on pitch' circuits at the array edge will come up due to the aggressive cell size scaling

Electronic health systems: challenges faced by hospital-based providers.

Science.gov (United States)

Agno, Christina Farala; Guo, Kristina L

2013-01-01

The purpose of this article is to discuss specific challenges faced by hospitals adopting the use of electronic medical records and implementing electronic health record (EHR) systems. Challenges include user and information technology support; ease of technical use and software interface capabilities; compliance; and financial, legal, workforce training, and development issues. Electronic health records are essential to preventing medical errors, increasing consumer trust and use of the health system, and improving quality and overall efficiency. Government efforts are focused on ways to accelerate the adoption and use of EHRs as a means of facilitating data sharing, protecting health information privacy and security, quickly identifying emerging public health threats, and reducing medical errors and health care costs and increasing quality of care. This article will discuss physician and nonphysician staff training before, during, and after implementation; the effective use of EHR systems' technical features; the selection of a capable and secure EHR system; and the development of collaborative system implementation. Strategies that are necessary to help health care providers achieve successful implementation of EHR systems will be addressed.

The Marihuana Dilemma: Challenge to Commanders.

Science.gov (United States)

The marihuana dilemma poses a major challenge to commanders in the US Army today. The problem was analyzed as to the characteristics of the drug...available to commanders to meet the challenge. The essay concludes that marihuana should not be legalized; drug users or former drug users should not be

Technical advisory panel for the large acceptance spectrometer: Final report

International Nuclear Information System (INIS)

1989-01-01

The Technical Advisory Panel for the Large Acceptance Spectrometer met on November 17--19, 1988, at CEBAF to perform a second review of the status of this project. The charge to the Panel was ''to provide technical advice to the CEBAF directorate on the design, construction, cost, schedule, and implementation of the Large Acceptance Spectrometer.'' In this written report, an overview of the entire project is given. Specific comments on the major components, data handling and analysis, assembly and installation, and management are presented. The Panel's conclusions are contained in the Executive Summary at the beginning of the report

The Adrenal Vein Sampling International Study (AVIS) for identifying the major subtypes of primary aldosteronism.

NARCIS (Netherlands)

Rossi, G.P.; Barisa, M.; Allolio, B.; Auchus, R.J.; Amar, L.; Cohen, D.; Degenhart, C.; Deinum, J.; Fischer, E.; Gordon, R.; Kickuth, R.; Kline, G.; Lacroix, A.; Magill, S.; Miotto, D.; Naruse, M.; Nishikawa, T.; Omura, M.; Pimenta, E.; Plouin, P.F.; Quinkler, M.; Reincke, M.; Rossi, E.; Rump, L.C.; Satoh, F.; Schultze Kool, L.J.; Seccia, T.M.; Stowasser, M.; Tanabe, A.; Trerotola, S.; Vonend, O.; Widimsky Jr, J.; Wu, K.D.; Wu, V.C.; Pessina, A.C.

2012-01-01

CONTEXT: In patients who seek surgical cure of primary aldosteronism (PA), The Endocrine Society Guidelines recommend the use of adrenal vein sampling (AVS), which is invasive, technically challenging, difficult to interpret, and commonly held to be risky. OBJECTIVE: The aim of this study was to

Geospatial big data and cartography : research challenges and opportunities for making maps that matter

OpenAIRE

Robinson, Anthony C.; Demsar, Urska; Moore, Antoni B.; Buckley, Aileen; Jiang, Bin; Field, Kenneth; Kraak, Menno-Jan; Camboim, Silvana P; Sluter, Claudia R

2017-01-01

Geospatial big data present a new set of challenges and opportunities for cartographic researchers in technical, methodological, and artistic realms. New computational and technical paradigms for cartography are accompanying the rise of geospatial big data. Additionally, the art and science of cartography needs to focus its contemporary efforts on work that connects to outside disciplines and is grounded in problems that are important to humankind and its sustainability. Following the develop...

Study of the method of placing technical stations

Directory of Open Access Journals (Sweden)