WorldWideScience

Sample records for major safety provisions

  1. Design provisions for safety

    International Nuclear Information System (INIS)

    Birkhofer, A.

    1983-01-01

    Design provisions for safety of nuclear power plants are based on a well balanced concept: the public is protected against a release of radioactive material by multiple barriers. These barriers are protected according to a 'defence-in-depth' principle. The reactor safety concept is primarily aimed at the prevention of accidents, especially fuel damage. Additionally, measures for consequence limitation are provided in order to prevent a severe release of radioactivity to the environment. However, it is difficult to judge the overall effectiveness of such devices. In a comprehensive safety analysis it has to be shown that the protection systems and safeguards work with sufficient reliability in the event of an accident. For the reliability assessment deterministic criteria (single failure, redundancy, fail-safe, demand for diversity) play an important role. Increasing efforts have been made to assess reliability quantitatively by means of probabilistic methods. It is now usual to perform reliability analyses of essential systems of nuclear power plants in the course of licensing procedures. As an additional level of emergency measures for a further reduction of hazards a reasonable amount of accident information has to be transferred. Operational experience may be considered as an important feedback to the design of plant safety features. Operator training has to include, besides skill in performing of operating procedures, the training of a flexible response to different accident situations. Experience has shown that the design provisions for safety could prevent dangerous release of the radioactive material to the environment after an accident has occurred. For future developments of reactor safety, extensive analyses of operating experience are of great importance. The main goal should be to enhance the reliability of measures for accident prevention, which prevent the core from meltdown or other damages

  2. A major safety overhaul

    CERN Multimedia

    2003-01-01

    A redefined policy, a revamped safety course, an environmental project... the TIS (Technical Inspection and Safety) Division has begun a major safety overhaul. Its new head, Wolfgang Weingarten, explains to the Bulletin why and how this is happening.

  3. Safety provisions of nuclear power plants

    International Nuclear Information System (INIS)

    Niehaus, F.

    1994-01-01

    Safety of nuclear power plants is determined by a deterministic approach complemented by probabilistic considerations. Much use has been made of the wealth of information from more than 6000 years of reactor operation. Design, construction and operation is governed by national and international safety standards and practices. The IAEA has prepared a set of Nuclear Safety Standards as recommendations to its Member States, covering the areas of siting, design, operations, quality assurance, and governmental organisations. In 1988 the IAEA published a report by the International Nuclear Safety Advisory Group on Basic Safety Principles for Nuclear Power Plants, summarizing the underlying objectives and principles of excellence in nuclear safety and the way in which its aspects are interrelated. The paper will summarize some of the key safety principles and provisions, and results and uses of Probabilistic Safety Assessments. Some comments will be made on the safety of WWER 440/230 and WWER-1000 reactors which are operated on Bulgaria. 8 figs

  4. Genesis of regulatory and legal provision of financial safety

    Directory of Open Access Journals (Sweden)

    M.V. Pataridze-Vyshynska

    2016-07-01

    Full Text Available The article describes the main problems that concern regulatory and legal provision of financial safety. The scientific groundwork of researchers of this matter in Ukraine is analyzed and its gaps are revealed. The state competences concerning the regulation of financial safety are investigated. The legal provision of financial safety in a retrospective section is considered. The short characteristic of the main legal instruments that make the subsoil for formation of financial safety environment is provided. The main stages of legislative process of ensuring financial safety are found out. The paradigm of financial safety formation is generalized. The possibilities of ensuring financial safety in different areas of the state financial policy through the definition of problem aspects and ways of their decision are defined. It is certain that the problem of protection of national interests in the economic sphere is rather actual, especially in formation of financial safety environment in modern conditions. This problem is subject to further investigation of both lawmakers and scientists-economists.

  5. Environment and safety: major goals for MARS

    International Nuclear Information System (INIS)

    Maninger, R.C.

    1983-01-01

    The Mirror Advanced Reactor Study (MARS) is a conceptual design study for a commercial fusion power reactor. One of the major goals of MARS is to develop design guidance so that fusion reactors can meet reasonable expectations for environmental health and safety. One of the first steps in the assessment of health and safety requirements was to examine what the guidelines might be for health and safety in disposal of radioactive wastes from fusion reactors. Then, using these quidelines as criteria, the impact of materials selection upon generation of radioactive wastes through neutron activation of structural materials was investigated. A conclusion of this work is that fusion power systems may need substantial engineering effort in new materials development and selection to meet the probable publicly acceptable levels of radioactivity for waste disposal in the future

  6. RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

    OpenAIRE

    V. A. Nikolayev

    2012-01-01

    Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

  7. RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

    Directory of Open Access Journals (Sweden)

    V. A. Nikolayev

    2012-01-01

    Full Text Available Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

  8. Methods for the sodium cooled fast reactor fire safety provisions

    International Nuclear Information System (INIS)

    Gryaznov, B.V.; Dergachev, N.P.

    1983-01-01

    Problems of fire safety provision on NPPs with sodium cooled fast reactor are under discussion. Methods of sodium leak localization, measures eliminating sodium flaring up during leaks and main means of sodium fire extinguishing are considered. An extinguishing of sodium flaring up is performed by means of sodium temperatUre decrease and by limitation of hydrogen access to the flaring up surface. A conclusion is made that the most effective methods of extinguishing are the following: self-extinguishing (due to hydrogen burning out in a limiting volume); extinguishing by a gas mixture of nitrogen and carbonic acid (initial filling and blowing of rooms during sodium flaring up); extinguishing by special powders

  9. MINING OPERATIONS'' SAFETY PROVISION - FUNDAMENTAL AND APPLIED SCIENCE TASK

    Directory of Open Access Journals (Sweden)

    Zakharov V.N.

    2017-12-01

    Full Text Available The stages of the modern Russian scientiic school of comprehensive exploitation of mineral resourcesformation, the main directions of which were concentrated in the Institute of Comprehensive Exploitation of Mineral Resources are considered. The main directions of ICEMR scientiic activity and the most important results of fundamental and applied research are presented, which are the scientiic Ьasis of modern research related to the safety of mineral reserves use provision. The importance of studying the coal and methane interaction, gas dynamic phenomena in coal mines, coal seam degassing technologies and mine methane utilization, mathematical modeling and solving proЬlems in the ield of stressed-deformed state, strength, fracturing mechanics, thermal conductivity, hydromechanics, forced viЬration, etc. are outlined.The effectiveness analysis of the state, academic and industrial Ьranch scientiic centers, university science, design organizations and mining companies joint efforts to reduce industrial injuries in the mining sector of the Russian economy is conducted. The need for targeted measures to move to new technical-technological and regulatory levels of mining, allowing to prevent the accidents with massive fatal injuries, was determined. The solution of these tasks is possiЬle only Ьy comЬining the efforts of the specialized institutes of the Russian Academy of Sciences, of the Ьranch science, of universities and mining companies through the implementation of the "Mining Safety" Scientiic Research Comprehensive Plan, coordinated Ьy ICEMR RAS.

  10. Provision of radiation safety at the designing of the industrial complex of solid radwaste management (ICSRM)

    International Nuclear Information System (INIS)

    Lobach, S.Yu.; Sevastyuk, O.V.

    2003-01-01

    The article presents the basic principles and criteria of the radiation safety provision, organization of the radiation control system, and dose calculation for the staff irradiation at the construction and operation of the Industrial complex of solid radwaste management (ICSRM)

  11. Safety culture in a major nuclear fuel cycle facility

    International Nuclear Information System (INIS)

    Pushparaja; Abani, M.C.

    2002-01-01

    Human factor plays an important role in development of safety culture in any nuclear fuel cycle facility. This is more relevant in major nuclear facility such as a reactor or a reprocessing plant. In Indian reprocessing plants, an effective worker's training, education and certification program is in place to sensitize the worker's response to safety and safe work procedures. The methodology followed to self evaluation of safety culture and the benefits in a reprocessing plant is briefly discussed. Various indicators of safety performance and visible signs of a good safety management are also qualitatively analyzed. (author)

  12. 29 CFR 1926.20 - General safety and health provisions.

    Science.gov (United States)

    2010-07-01

    ... for any part of the contract work shall require any laborer or mechanic employed in the performance of the contract to work in surroundings or under working conditions which are unsanitary, hazardous, or dangerous to his health or safety. (b) Accident prevention responsibilities. (1) It shall be the...

  13. Safety provision for nuclear power plants during remaining running time

    International Nuclear Information System (INIS)

    Rossnagel, Alexander; Hentschel, Anja

    2012-01-01

    With the phasing-out of the industrial use of nuclear energy for the power generation, the risk of the nuclear power plants has not been eliminated in principle, but only for a limited period of time. Therefore, the remaining nine nuclear power plants must also be used for the remaining ten years according to the state of science and technology. Regulatory authorities must substantiate the safety requirements for each nuclear power plant and enforce these requirements by means of various regulatory measures. The consequences of Fukushima must be included in the assessment of the safety level of nuclear power plants in Germany. In this respect, the regulatory authorities have the important tasks to investigate and assess the security risks as well as to develop instructions and orders.

  14. Safety and security of radioactive sources - international provisions

    International Nuclear Information System (INIS)

    Czarwinski, R.; Weiss, W.

    2005-01-01

    For more than 50 years radioactive sources are used beneficially world-wide in medicine, industry, research and teaching. In the early 50ies mainly Ra-226 sources were used especially for medical applications. In the mean time a great number of radionuclides with more or less risk to individuals, society and environment are used. The number of these sources is increasing. The available experience with the application of sealed sources in industry, medicine, research and teaching shows that despite the widespread use of such sources a high level of safety can be achieved. One precondition is that the regulatory control of a radioactive source has to be carried out consistently during the life cycle of the sources - 'from cradle to grave'. Particular attention has to be given to the so-called orphan sources which are not subject to regulatory control, either because they have never been under control, or because they have been lost, misplaced, abandoned, stolen or transferred without proper authorisation. The concern about orphan sources arising from poor safety and security standards of radioactive material around the world resulted in intensive global actions especially in the light of the security situation after the 11 th September 2001. The improvement of regulatory control is one of the key elements in preventing people, goods and environment from being exposed exceptionally by the misuse of radioactive sources. Important steps toward the improvement of the safety and security of high radioactive sources are the IAEA Code of Conduct on the Safety and Security of Radioactive Sources and the European Directive on the Control of High Activity Sealed Radioactive Sources and Orphan Sources. (orig.)

  15. Objective Provision Trees of Reactivity Control Safety Function for Sodium-Cooled Fast Reactor

    International Nuclear Information System (INIS)

    Kang, Bongsuk; Yang, Huichang; Suh, Namduk

    2014-01-01

    The purpose of this OPT is first to assure the DiD design during the licensing of Sf, but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). Based on the definition of Defense-in-Depth (DiD) levels and safety functions for KALIMER Sodium-Cooled Fast Reactor (SFR), suggested in the reference and, Objective Provision Trees (OPTs) of reactivity control function for level 1, 2, 3 and 4 DiD were developed and suggested in this paper. The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of Prototype Gen-IV Sf (PGSFR) is not mature yet, the OPT is developed for KALIMER design. Developed level 1 to 4 OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defense-in-depth evaluation frame for the regulatory reviews for the licensing process. In the next stage of this study, other safety function will be researched and findings can be suggested as recommendations for the safety improvement

  16. Objective Provision Trees of Reactivity Control Safety Function for Sodium-Cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Bongsuk; Yang, Huichang [TUEV Rheinland Korea Ltd., Seoul (Korea, Republic of); Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-05-15

    The purpose of this OPT is first to assure the DiD design during the licensing of Sf, but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). Based on the definition of Defense-in-Depth (DiD) levels and safety functions for KALIMER Sodium-Cooled Fast Reactor (SFR), suggested in the reference and, Objective Provision Trees (OPTs) of reactivity control function for level 1, 2, 3 and 4 DiD were developed and suggested in this paper. The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of Prototype Gen-IV Sf (PGSFR) is not mature yet, the OPT is developed for KALIMER design. Developed level 1 to 4 OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defense-in-depth evaluation frame for the regulatory reviews for the licensing process. In the next stage of this study, other safety function will be researched and findings can be suggested as recommendations for the safety improvement.

  17. 76 FR 63988 - Pilot Project on NAFTA Trucking Provisions; Pre-Authorization Safety Audits

    Science.gov (United States)

    2011-10-14

    ...-0097] Pilot Project on NAFTA Trucking Provisions; Pre-Authorization Safety Audits AGENCY: Federal Motor... motor carriers that applied to participate in the Agency's long-haul pilot program to test and... intent to proceed with the initiation of a United States- Mexico cross-border long-haul trucking pilot...

  18. Safety effects of infrastructural provisions for cyclists and moped-riders.

    NARCIS (Netherlands)

    Welleman, A.G.

    1986-01-01

    Some comments are given on PB 26128. Both in the Netherlands and in Denmark research has been done into the safety effects of infrastructural provisions, namely cycle tracks and cycle lanes. The research has mostly been done using before and after studies, based on statistical analysis of number of

  19. 20 CFR 645.260 - What health and safety provisions apply to participants in Welfare-to-Work programs?

    Science.gov (United States)

    2010-04-01

    ... Administrative Requirements § 645.260 What health and safety provisions apply to participants in Welfare-to-Work... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What health and safety provisions apply to participants in Welfare-to-Work programs? 645.260 Section 645.260 Employees' Benefits EMPLOYMENT AND TRAINING...

  20. Road safety: serious injuries remain a major unsolved problem.

    Science.gov (United States)

    Beck, Ben; Cameron, Peter A; Fitzgerald, Mark C; Judson, Rodney T; Teague, Warwick; Lyons, Ronan A; Gabbe, Belinda J

    2017-09-18

    To investigate temporal trends in the incidence, mortality, disability-adjusted life-years (DALYs), and costs of health loss caused by serious road traffic injury. A retrospective review of data from the population-based Victorian State Trauma Registry and the National Coronial Information System on road traffic-related deaths (pre- and in-hospital) and major trauma (Injury Severity Score > 12) during 2007-2015.Main outcomes and measures: Temporal trends in the incidence of road traffic-related major trauma, mortality, DALYs, and costs of health loss, by road user type. There were 8066 hospitalised road traffic major trauma cases and 2588 road traffic fatalities in Victoria over the 9-year study period. There was no change in the incidence of hospitalised major trauma for motor vehicle occupants (incidence rate ratio [IRR] per year, 1.00; 95% CI, 0.99-1.01; P = 0.70), motorcyclists (IRR, 0.99; 95% CI, 0.97-1.01; P = 0.45) or pedestrians (IRR, 1.00; 95% CI, 0.97-1.02; P = 0.73), but the incidence for pedal cyclists increased 8% per year (IRR, 1.08; 95% CI; 1.05-1.10; P road traffic injuries exceeded $14 billion during 2007-2015, although the cost per patient declined for all road user groups. As serious injury rates have not declined, current road safety targets will be difficult to meet. Greater attention to preventing serious injury is needed, as is further investment in road safety, particularly for pedal cyclists.

  1. Energy Independence and Security Act of 2007: A Summary of Major Provisions

    National Research Council Canada - National Science Library

    Sissine, Fred

    2007-01-01

    The Energy Independence and Security Act (P.L. 110-140, H.R. 6) is an omnibus energy policy law that consists mainly of provisions designed to increase energy efficiency and the availability of renewable energy...

  2. Do provisions to advance chemical facility safety also advance chemical facility security? - An analysis of possible synergies

    OpenAIRE

    Hedlund, Frank Huess

    2012-01-01

    The European Commission has launched a study on the applicability of existing chemical industry safety provisions to enhancing security of chemical facilities covering the situation in 18 EU Member States. This paper reports some preliminary analytical findings regarding the extent to which existing provisions that have been put into existence to advance safety objectives due to synergy effects could be expected advance security objectives as well.The paper provides a conceptual definition of...

  3. VOLUNTEERING TO BE TAXED: BUSINESS IMPROVEMENT DISTRICTS AND THE EXTRA-GOVERNMENTAL PROVISION OF PUBLIC SAFETY

    OpenAIRE

    Leah Brooks

    2006-01-01

    When the median voter's preference sets the level of local public goods, some voters are left unsatisfied. Is there an institution by which subsets of voters can resolve the collective action problem and increase the local provision of public goods? If so, what are the consequences? In response to problems such as crime and vandalism, neighborhood property owners have established Business Improvement Districts (BIDs) to provide local public goods. When a BID is approved by a majority of prope...

  4. Intranet-based safety documentation in management of major hazards and occupational health and safety.

    Science.gov (United States)

    Leino, Antti

    2002-01-01

    In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

  5. Safety provisions for UF{sub 6} handling in the design of a new UF{sub 6} conversion plant

    Energy Technology Data Exchange (ETDEWEB)

    Bannister, S.P. [British Nuclear Fuels plc, Preston (United Kingdom)

    1991-12-31

    British Nuclear Fuels plc (BNFL) Fuel Division is currently undertaking the final design and construction of a new UF{sub 6} conversion plant at its production site at Springfields near Preston in the north of England. The Company has gained much experience in the handling of UF{sub 6} during operation of plants on site since 1961. The major hazard occurs during the liquefication cycle and the basis of the maximum credible incident scenario adopted for safety assessment and design purposes is discussed. This paper considers the design features which have been incorporated in the new plant to counter the hazards presented by the presence of UF{sub 6} in gaseous and liquid form and explains current thinking on operational procedures in areas of potential risk such as cylinder filling. The plant emergency response philosophy and systems are described and specific design provisions which have been included to satisfy the UK regulatory bodies are outlined in some detail.

  6. Britain's Nuclear Electric pursues a major programme to enhance safety

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The UK state-owned nuclear utility, Nuclear Electric, is actively pursuing a major initiative inherited from its predecessor the Central Electricity Generating Board, known as the Station Enhancement Programme. The Enhancement Programme is a multi-million pound project and covers all Nuclear Electric's stations (including relevant aspects of the de-commissioning site at Berkeley). Its fundamental objective is to enhance the arrangements, practices and attitudes on the power stations to create an overall environment likely to promote ever safer and more reliable operation, and to take full account of the best international practices. The four year programme started in the spring of 1989, and is expected to be completed in 1993. Key elements of the programme include quality assurance based management systems; improvements to site and plant material conditions; a more formal approach to training; additional resources and controls to aid the management of maintenance defects; higher profile for the feedback of operational experience; management targets; a station evaluation programme; and formal feedback of lessons learned from the IAEA operational and safety review team visit to the Oldbury-on-Severn station in 1989. (author)

  7. Major accident prevention through applying safety knowledge management approach.

    Science.gov (United States)

    Kalatpour, Omid

    2016-01-01

    Many scattered resources of knowledge are available to use for chemical accident prevention purposes. The common approach to management process safety, including using databases and referring to the available knowledge has some drawbacks. The main goal of this article was to devise a new emerged knowledge base (KB) for the chemical accident prevention domain. The scattered sources of safety knowledge were identified and scanned. Then, the collected knowledge was formalized through a computerized program. The Protégé software was used to formalize and represent the stored safety knowledge. The domain knowledge retrieved as well as data and information. This optimized approach improved safety and health knowledge management (KM) process and resolved some typical problems in the KM process. Upgrading the traditional resources of safety databases into the KBs can improve the interaction between the users and knowledge repository.

  8. EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    A. V. Zhovna

    2008-01-01

    Full Text Available The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these documents is to ensure the required level of  fire safety. On the basis of the obtained results concerning  economic analysis of efficiency optimization directions are defined for selection of technical means of fire-fighting protection at objects of industrial purpose.

  9. Safety of RBMK reactors: Major results and prospects

    International Nuclear Information System (INIS)

    Sidorenko, V.A.

    1996-01-01

    The paper considers the following issues: basic reasons for the advent of NPPs with RBMK reactors; the logic of identifying top-priority measures immediately after the accident; top-priority measures for improving the safety and reliability of NPPs with RBMK reactors; upgrading NPPs with RBMK reactors in compliance with the Norms; programmes for retrofitting and upgrading of NPPs of the ''Rosnergoatom'' Concern and progress with their implementation as of April 1996; the safety of RBMK plants and the programmes of its enhancement with regard to modern requirements in the light of national and international assessment; objective indicators of safety, reliability, and economic efficiency of NPPs with RBMK reactors; economics: rationale for continuing plants operation till the end of their design lifetime. 8 refs, 3 figs

  10. 76 FR 62073 - Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety...

    Science.gov (United States)

    2011-10-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0721] Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety Modernization Act; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  11. Do provisions to advance chemical facility safety also advance chemical facility security? An analysis of possible synergies

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2012-01-01

    The European Commission has launched a study on the applicability of existing chemical industry safety provisions to enhancing security of chemical facilities covering the situation in 18 EU Member States. This paper reports some preliminary analytical findings regarding the extent to which exist...

  12. Relationships between safety and reliability in major hazard situations

    International Nuclear Information System (INIS)

    Farmer, F.R.

    1978-01-01

    Individual risk rates for various activities are presented and discussed. The concept of societal risk is introduced -the chance of hurting many people from one event. Major hazards present a possibility that an ensuing accident could have a very wide range of consequences from the trivial to a catastrophe. The techniques of assessing risks and consequences are being developed; these are closely related to the techniques of ensuring plant and system reliability. (author)

  13. Activity patterns during food provisioning are affected by artificial light in free living great tits (Parus major.

    Directory of Open Access Journals (Sweden)

    Mieke Titulaer

    Full Text Available Artificial light may have severe ecological consequences but there is limited experimental work to assess these consequences. We carried out an experimental study on a wild population of great tits (Parus major to assess the impact of light pollution on daily activity patterns during the chick provisioning period. Pairs that were provided with a small light outside their nest box did not alter the onset, cessation or duration of their working day. There was however a clear effect of artificial light on the feeding rate in the second half of the nestling period: when provided with artificial light females increased their feeding rate when the nestlings were between 9 and 16 days old. Artificial light is hypothesised to have affected the perceived photoperiod of either the parents or the offspring which in turn led to increased parental care. This may have negative fitness consequences for the parents, and light pollution may thus create an ecological trap for breeding birds.

  14. Analysis of National Major Work Safety Accidents in China, 2003-2012.

    Science.gov (United States)

    Ye, Yunfeng; Zhang, Siheng; Rao, Jiaming; Wang, Haiqing; Li, Yang; Wang, Shengyong; Dong, Xiaomei

    2016-01-01

    This study provides a national profile of major work safety accidents in China, which cause more than 10 fatalities per accident, intended to provide scientific basis for prevention measures and strategies to reduce major work safety accidents and deaths. Data from 2003-2012 Census of major work safety accidents were collected from State Administration of Work Safety System (SAWS). Published literature and statistical yearbook were also included to implement information. We analyzed the frequency of accidents and deaths, trend, geographic distribution and injury types. Additionally, we discussed the severity and urgency of emergency rescue by types of accidents. A total of 877 major work safety accidents were reported, resulting in 16,795 deaths and 9,183 injuries. The numbers of accidents and deaths, mortality rate and incidence of major accidents have declined in recent years. The mortality rate and incidence was 0.71 and 1.20 per 10(6) populations in 2012, respectively. Transportation and mining contributed to the highest number of major accidents and deaths. Major aviation and railway accidents caused more casualties per incident, while collapse, machinery, electrical shock accidents and tailing dam accidents were the most severe situation that resulted in bigger proportion of death. Ten years' major work safety accident data indicate that the frequency of accidents and number of eaths was declined and several safety concerns persist in some segments.

  15. Analysis of National Major Work Safety Accidents in China, 2003–2012

    Science.gov (United States)

    YE, Yunfeng; ZHANG, Siheng; RAO, Jiaming; WANG, Haiqing; LI, Yang; WANG, Shengyong; DONG, Xiaomei

    2016-01-01

    Background: This study provides a national profile of major work safety accidents in China, which cause more than 10 fatalities per accident, intended to provide scientific basis for prevention measures and strategies to reduce major work safety accidents and deaths. Methods: Data from 2003–2012 Census of major work safety accidents were collected from State Administration of Work Safety System (SAWS). Published literature and statistical yearbook were also included to implement information. We analyzed the frequency of accidents and deaths, trend, geographic distribution and injury types. Additionally, we discussed the severity and urgency of emergency rescue by types of accidents. Results: A total of 877 major work safety accidents were reported, resulting in 16,795 deaths and 9,183 injuries. The numbers of accidents and deaths, mortality rate and incidence of major accidents have declined in recent years. The mortality rate and incidence was 0.71 and 1.20 per 106 populations in 2012, respectively. Transportation and mining contributed to the highest number of major accidents and deaths. Major aviation and railway accidents caused more casualties per incident, while collapse, machinery, electrical shock accidents and tailing dam accidents were the most severe situation that resulted in bigger proportion of death. Conclusion: Ten years’ major work safety accident data indicate that the frequency of accidents and number of eaths was declined and several safety concerns persist in some segments. PMID:27057515

  16. Overlapping Nuclear Safety Control Provisions of the Atomic Energy Act and Electric Utility Act

    International Nuclear Information System (INIS)

    Chang, Gun-Hyun; Kim, Sang-Won; Koh, Jae-Dong; Ahn, Hyung-Joon; Kim, Chang-Bum

    2007-01-01

    Before May 17, 2005, Korea's nuclear power plant (hereinafter referred to as 'NNP') regulation system was two-pronged. Every NPP system consists of primary or secondary system, and each type was respectively regulated by the Atomic Energy Act(hereinafter referred to as 'AEA') and the Electric Utility Act(hereinafter referred to as 'EUA'). This unusual regulatory regime gave rise to a number of problems with respect to operation and safety. For this reason, the Enforcement Regulation of AEA and applicable Notice were revised on May 17, 2005 to the effect that all regulation on NPPs subject to EUA was brought under the purview of AEA, except regulation on business license for nuclear power generation under Article 7 of EUA and approval of plan of works for setting up electric installations (hereinafter referred to as 'construction plan') (including approval of any changes; the same shall apply hereinafter) under Article 61 thereof. From the point of view of the Ministry of Science and Technology, the regulation of NPPs by a single law has enhanced their safety. However, the Ministry of Commerce, Industry and Energy retains regulatory authority regarding NPPs. It reviews and approves construction plans for secondary system pursuant to Article 61 of EUA and Article 28 of the Enforcement Regulation thereof. This situation arose because Article 28 of the Enforcement Regulation of EUA continues to provide for matters related with nuclear power. Therefore, continued control of NPPs under EUA ignores the relationship and respective nature of AEA and EUA. There is also possibility of violation of a superseding law. Even if said provision is not in violation of a superseding law, Article 28 of the Enforcement Regulation of EUA poses the possibility of overlapping regulation, which may violate the principle of prohibiting excessive regulation, one of the principles of the Korean Constitution. Assessment of the dual regulatory system for review of secondary system requires (i

  17. Major food safety episodes in Taiwan: implications for the necessity of international collaboration on safety assessment and management.

    Science.gov (United States)

    Li, Jih-Heng; Yu, Wen-Jing; Lai, Yuan-Hui; Ko, Ying-Chin

    2012-07-01

    The major food safety episodes that occurred in Taiwan during the past decade are briefly reviewed in this paper. Among the nine major episodes surveyed, with the exception of a U.S. beef (associated with Creutzfeldt-Jakob disease)-related incident, all the others were associated with chemical toxicants. The general public, which has a layperson attitude of zero tolerance toward food safety, may panic over these food-safety-associated incidents. However, the health effects and impacts of most incidents, with the exception of the melamine incident, were essentially not fully evaluated. The mass media play an important role in determining whether a food safety concern becomes a major incident. A well-coordinated and harmonized system for domestic and international collaboration to set up standards and regulations is critical, as observed in the incidents of pork with ractopamine, Chinese hairy crab with nitrofuran antibiotics, and U.S. wheat with malathion. In the future, it can be anticipated that food safety issues will draw more attention from the general public. For unknown new toxicants or illicit adulteration of food, the establishment of a more proactive safety assessment system to monitor potential threats and provide real-time information exchange is imperative. Copyright © 2012. Published by Elsevier B.V.

  18. 77 FR 3784 - Recreational Boating Safety Projects, Programs and Activities Funded Under Provisions of the...

    Science.gov (United States)

    2012-01-25

    ... program which provides full marketing, media, public information, and program strategy support to the... Wear, Vessel Safety Check Program (VSC), Boating Safety Education Courses, Propeller Strike Avoidance, Carbon Monoxide Poisoning Awareness and Education, and other recreational boating safety issues on an as...

  19. Safety culture in nuclear installations: Bangladesh perspectives and key lessons learned from major events

    International Nuclear Information System (INIS)

    Jalil, A.; Rabbani, G.

    2002-01-01

    Steps necessary to be taken to ensure safety in nuclear installations are suggested. One of the steps suggested is enhancing the safety culture. It is necessary to gain a common understanding of the concept itself, the development stages of safety culture by way of good management practices and leadership for safety culture improvement in the long-term. International topical meetings on safety culture may serve as an important forum for exchange of experiences. From such conventions new initiatives and programmes may crop up which when implemented around the world is very likely to improve safety management and thus boost up the safety culture in nuclear installations. International co-operation and learning are to be prompted to facilitate the sharing of the achievements to face the challenges involved in the management of safety and fixing priorities for future work and identify areas of co-operations. Key lessons learned from some major events have been reported. Present status and future trend of nuclear safety culture in Bangladesh have been dealt with. (author)

  20. Aviation safety and maintenance under major organizational changes, investigating non-existing accidents.

    Science.gov (United States)

    Herrera, Ivonne A; Nordskag, Arve O; Myhre, Grete; Halvorsen, Kåre

    2009-11-01

    The objective of this paper is to discuss the following questions: Do concurrent organizational changes have a direct impact on aviation maintenance and safety, if so, how can this be measured? These questions were part of the investigation carried out by the Accident Investigation Board, Norway (AIBN). The AIBN investigated whether Norwegian aviation safety had been affected due to major organizational changes between 2000 and 2004. The main concern was the reduction in safety margins and its consequences. This paper presents a summary of the techniques used and explains how they were applied in three airlines and by two offshore helicopter operators. The paper also discusses the development of safety related indicators in the aviation industry. In addition, there is a summary of the lessons learned and safety recommendations. The Norwegian Ministry of Transport has required all players in the aviation industry to follow up the findings and recommendations of the AIBN study.

  1. Traffic safety in the U.S.: re-examining major opportunities.

    Science.gov (United States)

    Sivak, Michael; Luoma, Juha; Flannagan, Michael J; Bingham, C Raymond; Eby, David W; Shope, Jean T

    2007-01-01

    This article examines five major road-safety risk factors: exceeding posted speed limits, not using safety belts, driving while intoxicated, nighttime driving, and young drivers. The importance of each of these factors is documented, known effective countermeasures (both policy and technology based) are discussed, and impediments to the implementation of these countermeasures in the United States are examined. Based on current understanding of the five major risk factors, and of the available countermeasures, there appear to be a variety of opportunities to make substantial gains in road safety using existing knowledge. The limited implementation of a variety of known countermeasures therefore appears to be inconsistent with high-level, strategic goals to improve road safety. Consequently, a recommendation is made to comprehensively re-examine the balance between the countermeasures discussed in this article and economic, mobility, and privacy concerns. IMPACT ON PUBLIC SAFETY: Such a re-examination is likely to result in broad support for these countermeasures, with a consequent major improvement in road safety.

  2. Discussion on school-enterprise cooperation talent cultivation model for restaurant food safety major

    Directory of Open Access Journals (Sweden)

    Yin-hua LI

    2014-11-01

    Full Text Available Restaurant food safety school aims to cultivate high-skilled talents with professional ethics and professional quality for various food and beverage industries. They not only grasp basic knowledge and comprehensive vocational ability of restaurant food safety management, nutrition guidance and food matching, management and administration of catering industry but also adapt to the development of modern hotel and catering industry. Based on continuous exploration and cooperative experience with enterprises, the author attempts to provide reference basis for the establishment of restaurant food safety major.

  3. EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

    OpenAIRE

    A. V. Zhovna

    2008-01-01

    The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these docume...

  4. Assessing flight safety differences between the United States regional and major airlines

    Science.gov (United States)

    Sharp, Broderick H.

    During 2008, the U.S. domestic airline departures exceeded 28,000 flights per day. Thirty-nine or less than 0.2 of 1% of these flights resulted in operational incidents or accidents. However, even a low percentage of airline accidents and incidents continue to cause human suffering and property loss. The charge of this study was the comparison of U.S. major and regional airline safety histories. The study spans safety events from January 1982 through December 2008. In this quantitative analysis, domestic major and regional airlines were statistically tested for their flight safety differences. Four major airlines and thirty-seven regional airlines qualified for the safety study which compared the airline groups' fatal accidents, incidents, non-fatal accidents, pilot errors, and the remaining six safety event probable cause types. The six other probable cause types are mechanical failure, weather, air traffic control, maintenance, other, and unknown causes. The National Transportation Safety Board investigated each airline safety event, and assigned a probable cause to each event. A sample of 500 events was randomly selected from the 1,391 airlines' accident and incident population. The airline groups' safety event probabilities were estimated using the least squares linear regression. A probability significance level of 5% was chosen to conclude the appropriate research question hypothesis. The airline fatal accidents and incidents probability levels were 1.2% and 0.05% respectively. These two research questions did not reach the 5% significance level threshold. Therefore, the airline groups' fatal accidents and non-destructive incidents probabilities favored the airline groups' safety differences hypothesis. The linear progression estimates for the remaining three research questions were 71.5% for non-fatal accidents, 21.8% for the pilot errors, and 7.4% significance level for the six probable causes. These research questions' linear regressions are greater than

  5. Regulatory instrument review: Management of aging of LWR [light water reactor] major safety-related components

    International Nuclear Information System (INIS)

    Werry, E.V.

    1990-10-01

    This report comprises Volume 1 of a review of US nuclear plant regulatory instruments to determine the amount and kind of information they contain on managing the aging of safety-related components in US nuclear power plants. The review was conducted for the US Nuclear Regulatory Commission (NRC) by the Pacific Northwest Laboratory (PNL) under the NRC Nuclear Plant Aging Research (NPAR) Program. Eight selected regulatory instruments, e.g., NRC Regulatory Guides and the Code of Federal Regulations, were reviewed for safety-related information on five selected components: reactor pressure vessels, steam generators, primary piping, pressurizers, and emergency diesel generators. Volume 2 will be concluded in FY 1991 and will also cover selected major safety-related components, e.g., pumps, valves and cables. The focus of the review was on 26 NPAR-defined safety-related aging issues, including examination, inspection, and maintenance and repair; excessive/harsh testing; and irradiation embrittlement. The major conclusion of the review is that safety-related regulatory instruments do provide implicit guidance for aging management, but include little explicit guidance. The major recommendation is that the instruments be revised or augmented to explicitly address the management of aging

  6. 75 FR 78725 - Recreational Boating Safety Projects, Programs and Activities Funded Under Provisions of the...

    Science.gov (United States)

    2010-12-16

    ...: Funding was provided for this program which provides full marketing, media, public information, and... media and boating safety information at http://www.uscgboating.org for a worldwide audience. It covers a...

  7. Water transfer and major environmental provisions of the Central Valley Project Improvement Act: A preliminary economic evaluation

    Science.gov (United States)

    Loomis, John B.

    1994-06-01

    Increasing block water pricing, water transfer, and wildlife refuge water supply provisions of the Central Valley Project (CVP) Improvement Act are analyzed in terms of likely farmer response and economic efficiency of these provisions. Based on a simplified partial equilibrium analysis, we estimate small, but significant water conservation savings due to pricing reform, the potential for substantial water transfers to non-CVP customers in severe drought years when the water price exceeds 110 per acre foot (1 acre foot equals 1.234 × 103 m3) and positive net benefits for implementation of the wildlife refuge water supply provisions. The high threshold water price is partly a result of requiring farmers to pay full cost on transferred water plus a surcharge of 25 per acre foot if the water is transferred to a non-CVP user. The act also sets an important precedent for water pricing reform, water transfer provisions, and environmental surcharges on water users that may find their way to other Bureau of Reclamation projects.

  8. A critical analysis of the majority judgment in F v Minister of Safety ...

    African Journals Online (AJOL)

    The majority judgment of Mogoeng CJ in F v Minister of Safety and Security 2012 1 ... norms now play an important role in deciding questions of vicarious liability. ... the conduct of the employee wrongdoer and the business of his employer as ...

  9. Study Regarding the Provision of Security and Safety in the International Maritime Transport

    Directory of Open Access Journals (Sweden)

    Liliana POPA

    2011-11-01

    Full Text Available The security in transport has become a crucial issue internationally, especially after the terrorist attacks of September 2001 and even more recently. Maritime, along with aviation, is considered a sensitive and of high-risk transport sector, in terms of security. Moreover, topics related to safety in maritime transport have become very important over the past decades mostly because of the numerous maritime accidents putting in danger both human lives and the environment. Taking into account the global dimension of maritime transport along with the fact that the participation of Asia in the world trade during the past decade has been substantial, the current maritime safety and security practices apply for all areas. This can only be achieved through the application of high standards and regulations setting the prerequisites for safe and secure navigation. In this direction, a significant number of Directives, Regulations and Initiatives on maritime safety and security have been introduced by international and European organizations, such as the International Maritime Organization, (I.M.O., the International Labour Organization (I.L.O. and the European Union (EU. In the framework of this analysis, the levels of compliance of European and Asian countries, regarding the international legislation, is examined while special emphasis is given on the problems and difficulties encountered during the implementation processes. Furthermore, a number of recommendations aiming to enhance the existing levels of safety and security in maritime transport in both examined area is provided.

  10. 78 FR 14309 - Implementation of the FDA Food Safety Modernization Act Provision Requiring FDA To Establish...

    Science.gov (United States)

    2013-03-05

    ... FDA's Product Tracing Web page at http://www.fda.gov/Food/FoodSafety/FSMA/ucm270851.htm . This... Submit a Report to Congress for the Improvement of Tracking and Tracing of Food; Request for Comments and... Institute of Food Technologists (IFT) to execute product tracing pilot projects as described in the FDA Food...

  11. Appraisal for Japan of the safety of transport of radioactive material. Provision for the application of the IAEA safety standards

    International Nuclear Information System (INIS)

    2006-01-01

    The IAEA's Statute authorizes it to provide for the application of its standards at the request of any State. The objective of a TranSAS appraisal is to assist any requesting State to achieve a high level of safety in the transport of radioactive material by reviewing its implementation of the Transport Regulations and by making recommendations for improvement where appropriate.The IAEA discharges this statutory function through a number of mechanisms, including rendering independent peer review appraisal services to determine the status of compliance with its standards. The appraisal for Japan in December 2005 on the safety of the transport of radioactive material is the seventh TranSAS mission since the inception of the service. This report presents its findings. The TranSAS appraisal team completed a comprehensive appraisal of the implementation of the Transport Regulations in Japan. The cooperation of the authorities in Japan, and of all those who participated in the discussions, was excellent and contributed to the success of the appraisal. The comprehensive legal framework, with responsibilities identified in considerable detail and with clear lines of authority to minimize overlap of responsibilities, provides a sound basis for the implementation of the Transport Regulations. Generally, the Transport Regulations are implemented in accordance with IAEA requirements. Some areas for possible improvement have been identified. These areas relate mainly to reduction of regulations, quality management systems, training, compliance assurance and lessening the administrative burden for incorporating amendments to the IMDG Code. The findings include a considerable number of good practices, in particular in the area of maritime transport

  12. Safety provision during heating of coal downcast shafts with gas heat generators using degassed methane

    Directory of Open Access Journals (Sweden)

    В. Р. Алабьев

    2017-06-01

    Together with heat generators of mixed type the article also describes a working principle of heat generator of indirect action type, which to the fullest extent possible meets requirements of Russian Federation legislation and regulation for application of this heat generators in coal mines conditions. The article has a principal working scheme of heat unit layout using this type of generator. It is shown that after development of corresponding normative documents regulating processes of design, construction and operation of heating units using heaters of indirect action, their application in Russian coal mines will be possible without breaking Safety standards and rules.

  13. CURRENT TRENDS OF THE PROVISION FOR RADIATION SAFETY OF THE POPULATION OF THE RUSSIAN FEDERATION

    Directory of Open Access Journals (Sweden)

    G. G. Onishenko

    2014-01-01

    Full Text Available P.V.Ramzaev”The article is devoted to the actual issues ofRussian Federationpopulation radiation safety providing at the present stage. The important role of radiation-hygienic passportization is underlined in the process of the obtaining of objective information of radiation situation in the country, of population exposure doses from the all sources: artificial and natural, from the use of ionizing irradiation sources in medicine. The leading role is shown of the natural ionizing irradiation sources in the level of the country population exposure. The main directions of activities are stated aimed on the decreasing of population exposure doses from the natural sources. The brief characteristics is given of the radiation situation on the territories radioactively contaminated after the accident on the Chernobyl NPP, in the Pacific Ocean basin after the accident on the “Fukushima-1”NPP, of the main measures for radiation protection providing and for counteraction to radiation terrorism during the period of international sports and mass actions which were carried out in Russia in the last years (XXVII World Summer Universiade in2013 inKazan, XXII Olympic and XI Winter Paralympics Games in2014 inSochi. The most important tasks are defined for the improvement ofRussian Federationpopulation radiation safety at the present stage.

  14. Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2005 Ed.). Safety Guide (Spanish Edition); Listas de disposiciones del reglamento del OIEA para el transporte seguro de materiales radiactivos (Edicion de 2005 corregida)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the contracting parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  15. Assessment and management of ageing of major nuclear power plant components important to safety: Steam generators

    International Nuclear Information System (INIS)

    1997-11-01

    This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. They have been compiled using contributions from technical experts in typically 10 to 12 countries for each report, a feedback from a September 1994 Technical Committee Meeting attended by 53 technical experts from 21 Member States (who reviewed first drafts in specialized working groups), and review comments from invited specialists

  16. Operating performance and environmental and safety risks: A preliminary comparison of majors and independents

    International Nuclear Information System (INIS)

    Pulsipher, A.G.; Iledare, W.O.; Baumann, R.H.; Mesyanzhinov, D.

    1995-01-01

    The objective is to compare the safety and environmental records of oil and gas companies operating on the OCS in the Gulf of Mexico over the past decade. The reason for doing so is to help inform public sector policy-makers and private sector decision-makers about the potential safety and environmental risks associated with the expected increased presence of smaller independents in the domestic oil and gas industry in general and on the federal OCS in particular. The preliminary conclusion is that although independents have had a modestly high incidence of fires and explosions than the majors, the difference is not significant statistically and is largely attributable to a few ''bad actors'' rather than demonstrably poorer practice by the group as a whole

  17. Activity Patterns during Food Provisioning Are Affected by Artificial Light in Free Living Great Tits (Parus major)

    NARCIS (Netherlands)

    Titulaer, M.; Spoelstra, K.; Lange, C.Y.M.J.G.; Visser, M.E.

    2012-01-01

    Artificial light may have severe ecological consequences but there is limited experimental work to assess these consequences. We carried out an experimental study on a wild population of great tits (Parus major) to assess the impact of light pollution on daily activity patterns during the chick

  18. Safety and man in light of the analysis of major technical accidents

    International Nuclear Information System (INIS)

    Carnino, A.

    1990-01-01

    Up to the seventies, it was not easy to admit human failure as a cause of industrial accidents. Man was considered as reliable. With the perfection of materials, technical systems and industrial processes though, man has become the weakest link in the chain of technical events. He is and stays a remarkably reliable being, with a roughly estimated average failure quota of 1:1000 manipulations. If the hypothetical risk should be kept very low, this value can become a problem. Instead of judging a mistake as a punishable crime, as the present tendency will have it, a more differentiated, systematical approach is called for. By means of an analysis of four major accidents - Chernobyl, Three Mile Island, Challenger and Bhopal - interesting parallels between the causes of such accidents can be found. Human failure, e.g. of a surgeon, is in most cases, the direct cause of an accident. A whole series of further causes, which can be assigned to different areas of influence but are usually interdependent, also play a role. While the human factor must be viewed as more or less predetermined, far reaching improvements can be made to reduce the risk of accident. Today, thanks to modern technology and new findings, it is possible to practically neutralize human error. This creates more costs and necessitates giving up short term production maximization. It also requires the willingness to give safety absolute priority. The name 'culture de surete' (safety culture) is used to describe this concept. Surprising similarities between the causes of the four mentioned major accidents were discovered. Certain circumstances, such as the time of day, played a role. The concept of a plant, resp. technical process has an essential influence, as well as company policy (importance of safety, preparation of emergency procedures, training, maintenance, company rules) and management (evaluation and realization of foreign and the company's own operation experiences and error alarms). (author) 7

  19. Practices and Exploration on Competition of Molecular Biological Detection Technology among Students in Food Quality and Safety Major

    Science.gov (United States)

    Chang, Yaning; Peng, Yuke; Li, Pengfei; Zhuang, Yingping

    2017-01-01

    With the increasing importance in the application of the molecular biological detection technology in the field of food safety, strengthening education in molecular biology experimental techniques is more necessary for the culture of the students in food quality and safety major. However, molecular biology experiments are not always in curricula…

  20. The cohort of the atomic bomb survivors major basis of radiation safety regulations

    CERN Document Server

    Rühm, W; Nekolla, E A

    2006-01-01

    Since 1950 about 87 000 A-bomb survivors from Hiroshima and Nagasaki have been monitored within the framework of the Life Span Study, to quantify radiation-induced late effects. In terms of incidence and mortality, a statistically significant excess was found for leukemia and solid tumors. In another major international effort, neutron and gamma radiation doses were estimated, for those survivors (Dosimetry System DS02). Both studies combined allow the deduction of risk coefficients that serve as a basis for international safety regulations. As an example, current results on all solid tumors combined suggest an excess relative risk of 0.47 per Sievert for an attained age of 70 years, for those who were exposed at an age of 30 years. After exposure to an effective dose of one Sievert the solid tumor mortality would thus be about 50% larger than that expected for a similar cohort not exposed to any ionizing radiation from the bombs.

  1. Efficacy and safety of venous thromboembolism prophylaxis with apixaban in major orthopedic surgery

    Directory of Open Access Journals (Sweden)

    Werth S

    2012-03-01

    Full Text Available Sebastian Werth, Kai Halbritter, Jan Beyer-WestendorfCenter for Vascular Medicine and Department of Medicine III, Division of Angiology, University Hospital “Carl Gustav Carus” Dresden, Dresden, GermanyAbstract: Over the last 15 years, low-molecular-weight heparins (LMWHs have been accepted as the “gold standard” for pharmaceutical thromboprophylaxis in patients at high risk of venous thromboembolism (VTE in most countries around the world. Patients undergoing major orthopedic surgery (MOS represent a population with high risk of VTE, which may remain asymptomatic or become symptomatic as deep vein thrombosis or pulmonary embolism. Numerous trials have investigated LMWH thromboprophylaxis in this population and demonstrated high efficacy and safety of these substances. However, LMWHs have a number of disadvantages, which limit the acceptance of patients and physicians, especially in prolonged prophylaxis up to 35 days after MOS. Consequently, new oral anticoagulants (NOACs were developed that are of synthetic origin and act as direct and very specific inhibitors of different factors in the coagulation cascade. The most developed NOACs are dabigatran, rivaroxaban, and apixaban, all of which are approved for thromboprophylaxis in MOS in a number of countries around the world. This review is focused on the pharmacological characteristics of apixaban in comparison with other NOACs, on the impact of NOAC on VTE prophylaxis in daily care, and on the management of specific situations such as bleeding complications during NOAC therapy.Keywords: major orthopedic surgery, apixaban, dabigatran, edoxaban, rivaroxaban, deep vein thrombosis, venous thromboembolism, VTE prophylaxis

  2. Practices and exploration on competition of molecular biological detection technology among students in food quality and safety major.

    Science.gov (United States)

    Chang, Yaning; Peng, Yuke; Li, Pengfei; Zhuang, Yingping

    2017-07-08

    With the increasing importance in the application of the molecular biological detection technology in the field of food safety, strengthening education in molecular biology experimental techniques is more necessary for the culture of the students in food quality and safety major. However, molecular biology experiments are not always in curricula of Food quality and safety Majors. This paper introduced a project "competition of molecular biological detection technology for food safety among undergraduate sophomore students in food quality and safety major", students participating in this project needed to learn the fundamental molecular biology experimental techniques such as the principles of molecular biology experiments and genome extraction, PCR and agarose gel electrophoresis analysis, and then design the experiments in groups to identify the meat species in pork and beef products using molecular biological methods. The students should complete the experimental report after basic experiments, write essays and make a presentation after the end of the designed experiments. This project aims to provide another way for food quality and safety majors to improve their knowledge of molecular biology, especially experimental technology, and enhances them to understand the scientific research activities as well as give them a chance to learn how to write a professional thesis. In addition, in line with the principle of an open laboratory, the project is also open to students in other majors in East China University of Science and Technology, in order to enhance students in other majors to understand the fields of molecular biology and food safety. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(4):343-350, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

  3. THE FORMATION OF THE CONTOUR OF THE DOCUMENTED AND REAL FLIGHT SAFETY IN THE SYSTEM OF THE INFORMATION PROVISION OF SAFETY OF FLIGHTS

    Directory of Open Access Journals (Sweden)

    B. I. Bachkalo

    2015-01-01

    Full Text Available The article discusses the principles and mechanisms of formation of the contour of the real safety of flights and contour of the documented safety, allowing us to obtain information to control fligh safety. The proposed approach can be used in the algorithms of active on-board flight safety management system for the implementation of information support to the crew in flight and automatic control of flight safety.

  4. Major results from safety-related integral effect tests with VISTA-ITL for the SMART design

    International Nuclear Information System (INIS)

    Park, H. S.; Min, B. Y.; Shin, Y. C.; Yi, S. J.

    2012-01-01

    A series of integral effect tests (IETs) was performed by the Korea Atomic Energy Research Inst. (KAERI) using the VISTA integral test loop (VISTA-ITL) as a small-scale IET program. Among them this paper presents major results acquired from the safety-related IETs with the VISTA-ITL facility for the SMART design. Three small-break loss-of-coolant accident (SBLOCA) tests of safety injection system (SIS) line break, shutdown cooling system (SCS) line break and pressurizer safety valve (PSV) line break were successfully performed and the transient characteristics of a complete loss of flowrate (CLOF) was simulated properly with the VISTA-ITL facility. (authors)

  5. Major update of Safety Analysis Report for Thai Research Reactor-1/Modification 1

    Energy Technology Data Exchange (ETDEWEB)

    Tippayakul, Chanatip [Thailand Institute of Nuclear Technology, Bangkok (Thailand)

    2013-07-01

    Thai Research Reactor-1/Modification 1 (TRR-1/M1) was converted from a Material Testing Reactor in 1975 and it had been operated by Office of Atom for Peace (OAP) since 1977 until 2007. During the period, Office of Atom for Peace had two duties for the reactor, that is, to operate and to regulate the reactor. However, in 2007, there was governmental office reformation which resulted in the separation of the reactor operating organization from the regulatory body in order to comply with international standard. The new organization is called Thailand Institute of Nuclear Technology (TINT) which has the mission to promote peaceful utilization of nuclear technology while OAP remains essentially the regulatory body. After the separation, a new ministerial regulation was enforced reflecting a new licensing scheme in which TINT has to apply for a license to operate the reactor. The safety analysis report (SAR) shall be submitted as part of the license application. The ministerial regulation stipulates the outlines of the SAR almost equivalent to IAEA standard 35-G1. Comparing to the IAEA 35-G1 standard, there were several incomplete and missing chapters in the original SAR of TRR1/M1. The major update of the SAR was therefore conducted and took approximately one year. The update work included detail safety evaluation of core configuration which used two fuel element types, the classification of systems, structures and components (SSC), the compilation of detail descriptions of all SSCs and the review and evaluation of radiation protection program, emergency plan and emergency procedure. Additionally, the code of conduct and operating limits and conditions were revised and finalized in this work. A lot of new information was added to the SAR as well, for example, the description of commissioning program, information on environmental impact assessment, decommissioning program, quality assurance program and etc. Due to the complexity of this work, extensive knowledge was

  6. The ISAM Tool “Objective Provision Tree (OPT)”, for the Identification of the Design Basis and he Construction of the Safety Architecture

    Energy Technology Data Exchange (ETDEWEB)

    Fiorini, G.L., E-mail: gian-luigi.fiorini@orange.fr; Ammirabile, L., E-mail: luca.ammirabile@ec.europa.eu [European Commission - Joint Research Centre Institute for Energy and Transport (Belgium); Ranguelova, V., E-mail: vesselina.ranguelova@ec.europa.eu [European Commission - Joint Research Centre Headquarters, Brussels (Belgium)

    2014-10-15

    The design of the safety architecture of innovative as well as the assessment of existing nuclear systems needs to integrate the constraints related to the safety principles, requirements and objectives. Among these constraints, the compliance of the installation’s architecture with the principles of Defence in Depth (DiD), and its different levels, is certainly one of the most structuring. Defence in depth is the key to achieve safety robustness, thereby helping to ensure that nuclear systems do not exhibit any particularly dominant risk vulnerability. To help designers of innovative systems to correctly implement the defence-in-depth, or to assess how well the latter has been applied for existing reactor systems, the Objection-Provision Tree (OPT) methodology, which is part of the Integrated Safety Assessment Methodology (ISAM) promoted by the Generation IV Risk and Safety Working Group (GIF/RSWG), is suggested as a useful tool to complement the required traditional deterministic and probabilistic safety assessments. The document recalls the content of the OPT method and gives some details for its implementation, including for the systematic identification of the initiating events to be considered in designing the system. This step is essential especially for new systems for which there is no sufficient operational to support their design. The interactions with other tools (e.g. Failure Mode and Effect Analyses (FMEA) or ISAM Tools) are also commented. (author)

  7. Seismic safety margins research program. Phase I final report - Major structure response (Project IV)

    International Nuclear Information System (INIS)

    Benda, B.J.; Johnson, J.J.; Lo, T.Y.

    1981-08-01

    The primary task of the Major Structure Response Project within the Seismic Safety Margins Research Program (SSMRP) was to develop detailed finite element models of the Zion Nuclear Power Plant's containment building and auxiliary-fuel-turbine (AFT) complex. The resulting models served as input to the seismic methodology analysis chain. The containment shell was modeled as a series of beam elements with the shear and bending characteristics of a circular cylindrical shell. Masses and rotary inertias were lumped at nodal points; thirteen modes were included in the analysis. The internal structure was modeled with three-dimensional finite elements, with masses again lumped at selected nodes; sixty modes were included in the analysis. The model of the AFT complex employed thin plate and shell elements to represent the concrete shear walls and floor diaphragms, and beam and truss elements to model the braced frames. Because of the size and complexity of the model, and the potentially large number of degrees of freedom, masses were lumped at a limited number of node points. These points were selected so as to minimize the effect of the discrete mass distribution on structural response. One hundred and thirteen modes were extracted. A second objective of Project IV was to investigate the effects of uncertainty and variability on structural response. To this end, four side studies were conducted. Three of them, briefly summarized in this volume, addressed themselves respectively to an investigation of sources of random variability in the dynamic response of nuclear power plant structures; formulation of a methodology for modeling and evaluating the effects of structural uncertainty on predicted modal characteristics of major nuclear power plant structures and substructures; and a preliminary evaluation of nonlinear responses in shear-wall structures. A fourth side study, reported in detail in this volume, quantified variations in dynamic characteristics and seismic

  8. 77 FR 40513 - Safety Zone; Major Motion Picture Filming, Atlantic Intracoastal Waterway; Southport, NC

    Science.gov (United States)

    2012-07-10

    ... filming of a movie involving explosions and other dangerous stunts on water. The temporary safety zone is... filming of the movie, a delay in enacting this safety zone would be contrary to public interest. Under 5 U... Planning and Review This rule is not a significant regulatory action under section 3(f) of Executive Order...

  9. Diagnosis of poor safety culture as a major shortcoming in OHSAS 18001-certified companies.

    Science.gov (United States)

    Ghahramani, Abolfazl

    2017-04-07

    The evaluation of safety performance in occupational health and safety assessment series (OHSAS) 18001-certified companies provides useful information about the quality of the management system. A certified organization should employ an adequate level of safety management and a positive safety culture to achieve a satisfactory safety performance. The present study conducted in six manufacturing companies: three OHSAS 18001-certified, and three non-certified to assess occupational health and safety (OHS) as well as OHSAS 18001 practices. The certified companies had a better OHS practices compared with the non-certified companies. The certified companies slightly differed in OHS and OHSAS 18001 practices and one of the certified companies had the highest activity rates for both practices. The results indicated that the implemented management systems have not developed and been maintained appropriately in the certified companies. The in-depth analysis of the collected evidence revealed shortcomings in safety culture improvement in the certified companies. This study highlights the importance of safety culture to continuously improve the quality of OHSAS 18001 and to properly perform OHS/OHSAS 18001 practices in the certified companies.

  10. The knowledge, attitude and behavior on the radiation safety management for dental hygiene major students

    International Nuclear Information System (INIS)

    Jeon, Yeo Reong; Cho, Pyong Kon; Kim, Yong Min; Han, Eun Ok; Jang, Hyon Chul; Ko, Jong Kyung

    2015-01-01

    This study tries to find the educational basis based on the radiation safety knowledge, attitudes and behaviors to check the level of radiation safety behavior in domestic students who study dental hygiene. The students of 3rd and 4th grades in 83 universities which have registered on the Korean University Education Council were involved, and they were given a questionnaire for this study. The questionnaire was provided via visit with 20 copies to each university (total 1660 copies), mail by post and e-mail. Among them, we analyzed only 723 copies that we can trust. The data were analyzed with frequency, percentage, mean, standard deviation and Pearson’s correlation using the SPSS/WIN 15.0. As a result, there are correlations in the students’ knowledge, attitudes and behaviors regarding the radiation safety management. It means that the education which can improve the knowledge and attitudes should be applied to increase the action level of the radiation safety. In addition, the physical environment is the most closely correlated with the individual behavior, so it will be limited to improve the behavioral levels of the radiation safety if the physical environment is not prepared. Therefore, the physical environment should be supported to enhance the level of the radiation safety activity, and to increase the individual attitude level of radiation safety. The knowledge level of the radiation safety management is relatively lower than the attitudes level, and the behavior level is the lowest. Therefore, the education policy of the safety behavior must be enhanced. For domestic students, the educational intervention is necessary to improve their behavioral level of radiation safety management because they will be able to reduce the amount of radiation exposure of their patients in dental care after getting a job

  11. The knowledge, attitude and behavior on the radiation safety management for dental hygiene major students

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Yeo Reong; Cho, Pyong Kon; Kim, Yong Min [Dept. of Radiological Science, Daegu Catholic University, Daegu (Korea, Republic of); Han, Eun Ok [Korea Academy of Nuclear Safety, Seoul (Korea, Republic of); Jang, Hyon Chul [Dept. of Radiological Technology, Suseong College, Daegu (Korea, Republic of); Ko, Jong Kyung [Radiation Safety Management Commission, Daegu Health College, (Korea, Republic of)

    2015-12-15

    This study tries to find the educational basis based on the radiation safety knowledge, attitudes and behaviors to check the level of radiation safety behavior in domestic students who study dental hygiene. The students of 3rd and 4th grades in 83 universities which have registered on the Korean University Education Council were involved, and they were given a questionnaire for this study. The questionnaire was provided via visit with 20 copies to each university (total 1660 copies), mail by post and e-mail. Among them, we analyzed only 723 copies that we can trust. The data were analyzed with frequency, percentage, mean, standard deviation and Pearson’s correlation using the SPSS/WIN 15.0. As a result, there are correlations in the students’ knowledge, attitudes and behaviors regarding the radiation safety management. It means that the education which can improve the knowledge and attitudes should be applied to increase the action level of the radiation safety. In addition, the physical environment is the most closely correlated with the individual behavior, so it will be limited to improve the behavioral levels of the radiation safety if the physical environment is not prepared. Therefore, the physical environment should be supported to enhance the level of the radiation safety activity, and to increase the individual attitude level of radiation safety. The knowledge level of the radiation safety management is relatively lower than the attitudes level, and the behavior level is the lowest. Therefore, the education policy of the safety behavior must be enhanced. For domestic students, the educational intervention is necessary to improve their behavioral level of radiation safety management because they will be able to reduce the amount of radiation exposure of their patients in dental care after getting a job.

  12. Discussion on school-enterprise cooperation talent cultivation model for restaurant food safety major

    OpenAIRE

    Yin-hua LI; Li-ping MA

    2014-01-01

    Restaurant food safety school aims to cultivate high-skilled talents with professional ethics and professional quality for various food and beverage industries. They not only grasp basic knowledge and comprehensive vocational ability of restaurant food safety management, nutrition guidance and food matching, management and administration of catering industry but also adapt to the development of modern hotel and catering industry. Based on continuous exploration and cooperative experience with...

  13. Collective statement on major nuclear safety research facilities and programmes at risk

    International Nuclear Information System (INIS)

    2001-01-01

    Nuclear safety research remains necessary, since nuclear power programmes are dynamic. In addition to maintaining in-depth competencies, its aim is to provide information to plant designers, operators and regulators in support of the resolution of safety issues, to strengthen confidence in their solution and their implementation, and also to anticipate problems of potential significance. New fields of research open up as a result of plant ageing, plant life extension, plant up-rating, optimisation of plant economics and the associated need to further reduce uncertainties in safety margins quantification. The safety evaluation of future reactor systems being developed or considered in several Member countries also requires new research efforts. Accordingly, Member countries are encouraged to support efforts to maintain key research data, facilities and programmes through national support of international co-operation and funding. This should be under-pinned by development of short-, medium- and long-term strategic visions of the needs of the nuclear safety research community, including a strong component of international collaboration given the international nature of nuclear safety issues. (author)

  14. Assessment and management of ageing of major nuclear power plant components important to safety: PWR vessel internals

    International Nuclear Information System (INIS)

    1999-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific plant

  15. Major Results from 1-Train Passive Safety System Tests for the SMART Design with the SMART-ITL Facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun-Sik; Bae, Hwang; Ryu, Sung-Uk; Jeon, Byong-Guk; Ruy, Hyobong; Kim, Woo-Shik; Byun, Sun-Joon; Shin, Yong-Cheol; Min, Kyoung-Ho; Yi, Sung-Jae [KAERI, Daejeon (Korea, Republic of)

    2015-05-15

    To satisfy the domestic and international needs for nuclear safety improvement after the Fukushima accident, an effort to improve its safety has been studied, and a Passive Safety System (PSS) for SMART has been designed. In addition, an Integral Test Loop for the SMART design (SMART-ITL, or FESTA) has been constructed and it finished its commissioning tests in 2012. Consequently, a set of Design Base Accident (DBA) scenarios have been simulated using SMARTITL. Recently, a test program to validate the performance of the SMART PSS was launched and its scaled-down test facility was additionally installed at the existing SMART-ITL facility. In this paper, the major results from the 1-train passive safety system validation tests with the SMARTITL facility will be summarized. The acquired data will be used to validate the safety analysis code and its related models, to evaluate the performance of SMART PSS, and to provide base data during the application phase of the SDA revision and construction licensing. In this paper, the major results from the validation tests of the SMART passive safety system using a 1-train test facility were summarized. They include a dozen of SMART PSS tests using 1-train SMART PSS tests. From the test results, it was estimated that the SMART PSS has sufficient cooling capability to deal with the SBLOCA scenario of SMART. During the SBLOCA scenario, in the CMT, the water layer inventory was well stratified thermally and the safety injection water was injected efficiently into the RPV from the initial period, and cools down the RCS properly.

  16. 77 FR 62461 - Implementing Public Safety Broadband Provisions of the Middle Class Tax Relief and Job Creation...

    Science.gov (United States)

    2012-10-15

    ... Wireless Broadband Network,'' ``Special Purpose Bankruptcy Remote Entity,'' ``Upper 700 MHz D Block license... definitions ``700 MHz Public/Private Partnership,'' ``Network Assets Holder,'' ``Network Sharing Agreement...,'' ``Public safety broadband network operator,'' ``Shared Wireless Broadband Network, '' ``Special Purpose...

  17. Reliability and Maintainability Engineering - A Major Driver for Safety and Affordability

    Science.gov (United States)

    Safie, Fayssal M.

    2011-01-01

    The United States National Aeronautics and Space Administration (NASA) is in the midst of an effort to design and build a safe and affordable heavy lift vehicle to go to the moon and beyond. To achieve that, NASA is seeking more innovative and efficient approaches to reduce cost while maintaining an acceptable level of safety and mission success. One area that has the potential to contribute significantly to achieving NASA safety and affordability goals is Reliability and Maintainability (R&M) engineering. Inadequate reliability or failure of critical safety items may directly jeopardize the safety of the user(s) and result in a loss of life. Inadequate reliability of equipment may directly jeopardize mission success. Systems designed to be more reliable (fewer failures) and maintainable (fewer resources needed) can lower the total life cycle cost. The Department of Defense (DOD) and industry experience has shown that optimized and adequate levels of R&M are critical for achieving a high level of safety and mission success, and low sustainment cost. Also, lessons learned from the Space Shuttle program clearly demonstrated the importance of R&M engineering in designing and operating safe and affordable launch systems. The Challenger and Columbia accidents are examples of the severe impact of design unreliability and process induced failures on system safety and mission success. These accidents demonstrated the criticality of reliability engineering in understanding component failure mechanisms and integrated system failures across the system elements interfaces. Experience from the shuttle program also shows that insufficient Reliability, Maintainability, and Supportability (RMS) engineering analyses upfront in the design phase can significantly increase the sustainment cost and, thereby, the total life cycle cost. Emphasis on RMS during the design phase is critical for identifying the design features and characteristics needed for time efficient processing

  18. 78 FR 73756 - Process Safety Management and Prevention of Major Chemical Accidents

    Science.gov (United States)

    2013-12-09

    ... include certain molecular structures that have been identified as highly reactive, based on scientific... procedures for organizational changes,\\10\\ such as changes in management structure, budget cuts, or personnel...; employee training; prestartup safety reviews; evaluation of the mechanical integrity of critical equipment...

  19. Assessment and management of ageing of major nuclear power plant components important to safety: BWR pressure vessel internals

    International Nuclear Information System (INIS)

    2005-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and ware out of components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of heavy water moderated reactors (HWRs), boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues

  20. Assessment and management of ageing of major nuclear power plant components important to safety: BWR pressure vessels

    International Nuclear Information System (INIS)

    2005-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues

  1. Assessment and management of ageing of major nuclear power plant components important to safety. Primary piping in PWRs

    International Nuclear Information System (INIS)

    2003-07-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues. The

  2. Major structural response methods used in the seismic safety margins research program

    International Nuclear Information System (INIS)

    Chou, C.K.; Lo, T.; Vagliente, V.

    1979-01-01

    In order to evaluate the conservatisms in present nuclear power plant seismic safety requirements, a probabilistic based systems model is being developed. This model will also be used to develop improved requirements. In Phase I of the Seismic Safety Margins Research Program (SSMRP), this methodology will be developed for a specific nuclear power plant and used to perform probabilistic sensitivity studies to gain engineering insights into seismic safety requirements. Random variables in the structural response analysis area, or parameters which cause uncertainty in the response, are discussed and classified into three categories; i.e., material properties, structural dynamic characteristics and related modeling techniques, and analytical methods. The sensitivity studies are grouped into two categories; deterministic and probabilistic. In a system analysis, transfer functions in simple form are needed since there are too many responses which have to be calculated in a Monte Carlo simulation to use the usual straightforward calculation approach. Therefore, the development of these simple transfer functions is one of the important tasks in SSMRP. Simplified as well as classical transfer functions are discussed

  3. The safety and quality of childbirth in the context of health systems: mapping maternal health provision in Lebanon

    Science.gov (United States)

    DeJong, Jocelyn; Akik, Chaza; El Kak, Faysal; Osman, Hibah; El-Jardali, Fadi

    2010-01-01

    Objective to provide basic information on the distribution (public/private and geographically) and the nature of maternity health provision in Lebanon, including relevant health outcome data at the hospital level in order to compare key features of provision with maternal/neonatal health outcomes. Design a self-completion questionnaire was sent to private hospitals by the Syndicate of Private Hospitals in collaboration with the study team and to all public hospitals in Lebanon with a functioning maternity ward by the study team in cooperation with the Ministry of Public Health. Setting childbirth in an institutional setting by a trained attendant is almost universal in Lebanon and the predominant model of care is obstetrician-led rather than midwife-led. Yet due to a 15-year-old civil war and a highly privatised health sector, Lebanon lacks systematic or publically available data on the organisation, distribution and quality of maternal health services. An accreditation system for private hospitals was recently initiated to regulate the quality of hospital care in Lebanon. Participants in total, 58 (out of 125 eligible) hospitals responded to the survey (46% total response rate). Only hospital-level aggregate data were collected. Measurements the survey addressed the volume of services, mode of payment for deliveries, number of health providers, number of labour and childbirth units, availability of neonatal intensive care units, fetal monitors and infusion rate regulation pumps for oxytocin, as well as health outcome data related to childbirth care and stillbirths for the year 2008. Findings the study provides the first data on maternal health provision from a survey of all eligible hospitals in Lebanon. More than three-quarters of deliveries occur in private hospitals, but the Ministry of Public Health is the single most important source of payment for childbirth. The reported hospital caesarean section rate is high at 40.8%. Essential equipment for safe maternal

  4. 78 FR 24138 - Implementing Public Safety Broadband Provisions of the Middle Class Tax Relief and Job Creation...

    Science.gov (United States)

    2013-04-24

    ... Safety Spectrum Act. The proposals considered in the document are intended to provide a solid foundation.... 6201(c). Proposals in the NPRM are intended to provide a solid foundation for FirstNet's operations..., GPS equipment, pagers, cellular phones, mobile communications equipment, and radio and television...

  5. Assessment and management of ageing of major nuclear power plant components important to safety: CANDU reactor assemblies

    International Nuclear Information System (INIS)

    2001-02-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wearout of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring, and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs) including the Soviet designed water moderated and water cooled energy reactors (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which

  6. Assessment and Management of ageing of major nuclear power plant components important to safety: PWR pressure vessels

    International Nuclear Information System (INIS)

    1999-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g., caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs; and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which involves the integration of

  7. Development of the NIREX generic transport safety assessment to assist in the provision of waste packaging advice

    International Nuclear Information System (INIS)

    Hutchinson, D.L.; Marrison, A.R.; Sievwright, R.W.T.

    2002-01-01

    The current Nirex Mission is to provide the United Kingdom with safe, environmentally sound and publicly acceptable options for the long-term management of radioactive materials. As part of this role, Nirex has developed a phased deep geological disposal concept which is defined by six 'generic documents' that describe systems, processes and safety assessments that are not specific to any one location or geology. These generic documents give access to detailed information about the ideas and approaches that underpin the phased disposal concept, and have been published with an invitation to enter into dialogue with Nirex regarding these issues. The generic documents identify the requirements for an integrated transport system that would be necessary for the management of the intermediate-level (ILW) and low-level (LLW) wastes within Nirex's remit - the so-called reference case volume. This has involved Nirex in the development of transport hardware and associated safety reports and modelling and assessment tools for transport system logistics and system safety. Although the phased disposal concept is only one option for the long-term management of waste, the integrated transport system and associated modelling tools, is likely to be of equal relevance to other options. The safety assessment of the generic transport operation for the movement of ILW and LLW waste from waste producers' sites to a future radioactive waste disposal facility is described in one of the generic documents - the generic transport safety assessment (GTSA). The GTSA demonstrates that the transport operation is compliant with Nirex safety principles, and that the nuclear and non-nuclear risks to the public and workers from routine transport and from accidents are acceptable. This paper describes the types of risk that are calculated, and discusses the data requirements and calculation methodology. The verification and validation methodology is outlined, together with a discussion of the results

  8. PATIENT SAFETY AND MEDICATION ERRORS IN THE PROVISION OF HEALTH CARE SERVICES-CHALLENGES FOR CONTEMPORARY PRACTICE

    Directory of Open Access Journals (Sweden)

    Tatjana Stojković

    2016-06-01

    Full Text Available Non-maleficence represents one of the basic ethical principles that health care providers should be guided by during service delivery. Establishment of patient safety is nowadays recognized as an issue of global concern in health care and a critical component of quality management. The aim of this paper is to provide a literature review of the patient safety and medication errors concept, with special attention given to defining the most significant terms, analyzing the causal factors and reviewing their classification. Raising awareness about the importance of patient safety has resulted in an increase in the number of medication error studies over the last decade. The traditional approach which makes health workers responsible for reduction of incidents is replaced by the modern concept which implies the involvement of all stakeholders at all levels of the system. In developed countries, the application of prospective risk management models for specific health care processes has already started. However, all these studies are mainly carried out at the secondary and tertiary levels of health care, while they are almost non-existent at the primary level. In the Republic of Serbia, a Rulebook on indicators of the quality of health care has been recently adopted, but a trend of significant lack of data regarding patient safety can be noticed due to inadequate reporting. It is necessary to continue with the homogenization of terminology and to increase the number of analyses of causal factors with the aim of prospective risk identification, particularly in developing countries such as the Republic of Serbia.

  9. Major cultural-compatibility complex: considerations on cross-cultural dissemination of patient safety programmes.

    Science.gov (United States)

    Jeong, Heon-Jae; Pham, Julius C; Kim, Minji; Engineer, Cyrus; Pronovost, Peter J

    2012-07-01

    As the importance of patient safety has been broadly acknowledged, various improvement programmes have been developed. Many of the programmes with proven efficacy have been disseminated internationally. However, some of those attempts may encounter unexpected cross-cultural obstacles and may fail to harvest the expected success. Each country has different cultural background that has shaped the behavior of the constituents for centuries. It is crucial to take into account these cultural differences in effectively disseminating these programmes. As an organ transplantation requires tissue-compatibility between the donor and the recipient, there needs to be compatibility between the country where the program was originally developed and the nation implementing the program. Though no detailed guidelines exist to predict success, small-scale pilot tests can help evaluate whether a safety programme will work in a new cultural environment. Furthermore, a pilot programme helps reveal the source of potential conflict, so we can modify the original programme accordingly to better suit the culture to which it is to be applied. In addition to programme protocols, information about the cultural context of the disseminated programme should be conveyed during dissemination. Original programme designers should work closely with partnering countries to ensure that modifications do not jeopardise the original intention of the programme. By following this approach, we might limit barriers originating from cultural differences and increase the likelihood of success in cross-cultural dissemination.

  10. Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2009 Ed.). Safety Guide

    International Nuclear Information System (INIS)

    2014-01-01

    This Safety Guide is issued in support of Regulations for the Safe Transport of Radioactive Material (IAEA Safety Standards Series No. TS-R-1, 2009 Edition). It lists the paragraph numbers of the Transport Regulations that are relevant for specified types of consignment, classified according to their UN numbers. It does not provide additional recommendations. The intended users are consignors and consignees, carriers, shippers, regulators, and end users involved in the transport of radioactive material. A person or organization intending to transport a particular type of consignment of radioactive material must meet requirements in all sections of the Transport Regulations. This Safety Guide aids users by providing a listing of the relevant requirements of the Transport Regulations for each type of radioactive material, package or shipment. Once a consignor has classified the radioactive material to be shipped, the appropriate UN number can be assigned and the paragraph numbers of the requirements that apply for the shipment can be found in the corresponding schedule

  11. Assessment and management of ageing of major nuclear power plant components important to safety: PWR vessel internals: 2007 update

    International Nuclear Information System (INIS)

    2007-06-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that effective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) is one of the most important issues for plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wearout of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. IAEA-TECDOC-1119 documents ageing assessment and management practices for PWR Reactor Vessel Internals (RVIs) that were current at the time of its finalization in 1997-1998. Safety significant operating events have occurred since the finalization of the TECDOC, e.g. irradiation assisted stress corrosion cracking (IASCC) of baffle-former bolts, which threatened the integrity of the vessel internals. In addition, concern of fretting wear of control rod guide tubes has been raised in Japan. These events led to new ageing management actions by both NPP operators and regulators. Therefore it was recognized that IAEA-TECDOC-1119 should be updated by incorporating those new events and their countermeasures. The objective of this report is to update relevant sections of the existing IAEA-TECDOC- 1119 in order to provide current ageing management guidance for PWR RVIs to all involved in the operation and regulation of PWRs and thus to help ensure PWR safety in IAEA Member States throughout their entire service life

  12. Assessment and management of ageing of major nuclear power plant components important to safety: Metal components of BWR containment systems

    International Nuclear Information System (INIS)

    2000-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed toward technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific

  13. Utility of melatonin to treat surgical stress after major vascular surgery--a safety study

    DEFF Research Database (Denmark)

    Kücükakin, Bülent; Lykkesfeldt, Jens; Nielsen, Hans Jørgen

    2008-01-01

    of reducing oxidative damage. The aim of this pilot study was to evaluate the safety of various doses of melatonin administered during or after surgery and to monitor the changes in biomarkers of oxidative stress and inflammation during the pre-, intra-, and postoperative period. Six patients undergoing......Surgery for abdominal aortic aneurysm is associated with elevated oxidative stress. As an antioxidant in animal and human studies, melatonin has the potential of ameliorating some of this oxidative stress, but melatonin has never been administered to adults during surgery for the purpose......-reactive protein (CRP) were also measured for 4 days after surgery. Melatonin administration did not change hemodynamic parameters (mean arterial pressure or pulse rate) during surgery (P = 0.499 and 0.149, respectively), but oxidative stress parameters (MDA and AA) decreased significantly (P = 0.014 and 0...

  14. Utility of melatonin to treat surgical stress after major vascular surgery - a safety study

    DEFF Research Database (Denmark)

    Kücükakin, Bülent; Lykkesfeldt, Jens; Nielsen, Hans Jørgen

    2008-01-01

    of reducing oxidative damage. The aim of this pilot study was to evaluate the safety of various doses of melatonin administered during or after surgery and to monitor the changes in biomarkers of oxidative stress and inflammation during the pre-, intra- and postoperative period. Six patients undergoing aortic......Surgery for abdominal aortic aneurysm is associated with elevated oxidative stress. As an antioxidant in animal and human studies, melatonin has the potential of ameliorating some of this oxidative stress, but melatonin has never been administered to adults during surgery for the purpose......) were also measured for four days after surgery. Melatonin administration did not change hemodynamic parameters (mean arterial pressure or pulse rate) during surgery (P=0.499 and 0.149, respectively), but oxidative stress parameters (MDA and AA) decreased significantly (P=0.014 and 0.001, respectively...

  15. Appraisal for France of the safety of the transport of radioactive material. Provision for the application of the IAEA safety standards

    International Nuclear Information System (INIS)

    2004-01-01

    The IAEA has the specific statutory function within the United Nations system of establishing standards of safety for the protection of health against exposure to ionizing radiation. As part of this mandate, the IAEA has issued Regulations for the Safe Transport of Radioactive Material, and has also established the Transport Safety Appraisal Service (TranSAS) to carry out, at the request of States, appraisals of the implementation of these regulations. The IAEA carried out such an appraisal in France from 27 March to 8 April 2004. The appraisal addressed all relevant transport activities in France, both national and international, for all modes of transport, with special emphasis on the maritime transport and air transport of radioactive material. This report summarizes the findings of the 13 independent experts who participated in the appraisal

  16. The provision and impact of online patient access to their electronic health records (EHR) and transactional services on the quality and safety of health care: systematic review protocol.

    Science.gov (United States)

    Mold, Freda; Ellis, Beverley; de Lusignan, Simon; Sheikh, Aziz; Wyatt, Jeremy C; Cavill, Mary; Michalakidis, Georgios; Barker, Fiona; Majeed, Azeem; Quinn, Tom; Koczan, Phil; Avanitis, Theo; Gronlund, Toto Anne; Franco, Christina; McCarthy, Mary; Renton, Zoë; Chauhan, Umesh; Blakey, Hannah; Kataria, Neha; Jones, Simon; Rafi, Imran

    2012-01-01

    Innovators have piloted improvements in communication, changed patterns of practice and patient empowerment from online access to electronic health records (EHR). International studies of online services, such as prescription ordering, online appointment booking and secure communications with primary care, show good uptake of email consultations, accessing test results and booking appointments; when technologies and business process are in place. Online access and transactional services are due to be rolled out across England by 2015; this review seeks to explore the impact of online access to health records and other online services on the quality and safety of primary health care. To assess the factors that may affect the provision of online patient access to their EHR and transactional services, and the impact of such access on the quality and safety of health care. Two reviewers independently searched 11 international databases during the period 1999-2012. A range of papers including descriptive studies using qualitative or quantitative methods, hypothesis-testing studies and systematic reviews were included. A detailed eligibility criterion will be used to shape study inclusion. A team of experts will review these papers for eligibility, extract data using a customised extraction form and use the Grading of Recommendations Assessment, Development and Evaluation (GRADE) instrument to determine the quality of the evidence and the strengths of any recommendation. Data will then be descriptively summarised and thematically synthesised. Where feasible, we will perform a quantitative meta-analysis. Prospero (International Prospective Register of Systematic Reviews) registration number: crd42012003091.

  17. Neighborhood Safety and Major Depressive Disorder in a National Sample of Black Youth; Gender by Ethnic Differences

    Science.gov (United States)

    Assari, Shervin; Caldwell, Cleopatra Howard

    2017-01-01

    Adolescence is a developmental period marked by increased stress, especially among Black youth. In addition to stress related to their developmental transition, social factors such as a perceived unsafe neighborhood impose additional risks. We examined gender and ethnic differences in the association between perceived neighborhood safety and major depressive disorder (MDD) among a national sample of Black youth. We used data from the National Survey of American Life - Adolescents (NSAL-A), 2003–2004. In total, 1170 Black adolescents entered the study. This number was composed of 810 African American and 360 Caribbean Black youth (age 13 to 17). Demographic factors, perceived neighborhood safety, and MDD (Composite International Diagnostic Interview, CIDI) were measured. Logistic regressions were used to test the association between neighborhood safety and MDD in the pooled sample, as well as based on ethnicity by gender groups. In the pooled sample of Black youth, those who perceived their neighborhoods to be unsafe were at higher risk of MDD (Odds Ratio [OR] = 1.25; 95% Confidence Interval [CI] = 1.02-1.51). The perception that one’s neighborhood is unsafe was associated with a higher risk of MDD among African American males (OR=1.41; 95% CI = 1.03–1.93) but not African American females or Caribbean Black males and females. In conclusion, perceived neighborhood safety is not a universal psychological determinant of MDD across ethnic by gender groups of Black youth; however, policies and programs that enhance the sense of neighborhood safety may prevent MDD in male African American youth. PMID:28241490

  18. Assessment and management of ageing of major nuclear power plant components important to safety: PWR pressure vessels. 2007 update

    International Nuclear Information System (INIS)

    2007-06-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that effective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) is one of the most important issues for plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. IAEA-TECDOC-1120 documented ageing assessment and management practices for pressurized water reactor (PWR) reactor pressure vessels (RPVs) that were current at the time of its finalization in 1997-1998. Safety significant operating events have occurred since the finalization of the TECDOC, e.g. primary water stress corrosion cracking (PWSCC) of Alloy 600 control rod drive mechanism (CRDM) penetrations and boric acid corrosion/wastage of RPV heads, which threatened the integrity of the RPV heads. These events led to new ageing management actions by both NPP operators and regulators. Therefore it was recognized that IAEA-TECDOC-1120 should be updated by incorporating those new events and their countermeasures. The objective of this report is to update IAEA-TECDOC-1120 in order to provide current ageing management guidance for PWR RPVs to all involved in the operation and regulation of PWRs and thus to help ensure PWR RPV integrity in IAEA Member States throughout their entire service life

  19. Environmental Safety of the Use of Major Surfactant Classes in North America

    DEFF Research Database (Denmark)

    Cowan-Ellsberry, Christina; Sanderson, Hans; Belanger, Scott

    2014-01-01

    to the aquatic or sediment environments. This paper also highlights the many years of research that the surfactant and cleaning products industry has supported, as part of their environmental sustainability commitment, to improve environmental tools, approaches, and develop innovative methods appropriate...... to address environmental properties of personal care and cleaning product chemicals, many of which have become approved international standard methods.......This paper brings together over 250 published and unpublished studies on the environmental properties, fate and toxicity of the four major, high volume surfactant classes and relevant feedstocks. The surfactants and feedstocks covered include alcohol sulfate (AS), alcohol ethoxysulfate (AES...

  20. Management of a comprehensive radiation safety program in a major American University and affiliated academic medical center

    International Nuclear Information System (INIS)

    Yoshizumi, T.T.; Reiman, R.E.; Vylet, V.; Clapp, J.R.; Thomann, W.R.; Lyles, K.W.

    2000-01-01

    Duke University, which operates under eight radiation licenses issued by the State of North Carolina, consists of a leading medical center including extensive inpatient and outpatient facilities, a medical school, biomedical research labs, and an academic campus including two major accelerator facilities. The Nuclear Medicine and Radiation Oncology departments handle over 40,000 diagnostic and therapeutic procedures annually, including approximately 160 radioiodine therapeutic cases. In biomedical research labs, about 300 professors are authorized to use radioactive materials. Over 2,000 radiation workers are identified on campus. Over the past two years, we have transformed the existing radiation safety program into a more responsive and more accountable one. Simultaneously, the institutional 'culture' changed, and the Radiation Safety Division came to be viewed as a helpful ally by investigators. The purpose of this paper is to present our experiences that have made this transformation possible. Our initiatives included; (a) defining short-term and long-term goals; (b) establishing a definitive chain of authority; (c) obtaining an external review by a consultant Health Physicist; (d) improving existing radiation safety programs; (e) reorganizing the Radiation Safety Division, with creation of multidisciplinary professional staff positions; (f) implementing campus-wide radiation safety training, (g) increasing technician positions; (h) establishing monthly medical center radiation safety executive meeting. As a result progress made at the Divisional level includes; (a) culture change by recruiting professionals with academic credentials and recent college graduates; (b) implementing weekly staff meetings and monthly quality assurance meetings; (c) achieving academic prominence by publishing and presenting papers in national meetings; (d) senior staff achieving faculty appointments with academic departments; (e) senior staff participating in graduate student

  1. Aboriginal and Torres Strait Islander Worldviews and Cultural Safety Transforming Sexual Assault Service Provision for Children and Young People

    Directory of Open Access Journals (Sweden)

    Leticia Funston

    2013-08-01

    Full Text Available Child Sexual Assault (CSA in Aboriginal and Torres Strait Islander communities is a complex issue that cannot be understood in isolation from the ongoing impacts of colonial invasion, genocide, assimilation, institutionalised racism and severe socio-economic deprivation. Service responses to CSA are often experienced as racist, culturally, financially and/or geographically inaccessible. A two-day forum, National Yarn Up: Sharing the Wisdoms and Challenges of Young People and Sexual Abuse, was convened by sexual assault services to identify the main practice and policy concerns regarding working with Aboriginal and Torres Strait Islander children and young people (C&YP, families and communities in the context of CSA. The forum also aimed to explore how services can become more accountable and better engaged with the communities they are designed to support. The forum was attended by eighty invited Aboriginal and Torres Strait Islander and non-Aboriginal youth sexual assault managers and workers representing both “victim” and “those who sexually harm others” services. In keeping with Aboriginal Community-Based Research methods forum participants largely directed discussions and contributed to the analysis of key themes and recommendations reported in this article. The need for sexual assault services to prioritise cultural safety by meaningfully integrating Aboriginal and Torres Strait Islander Worldviews emerged as a key recommendation. It was also identified that collaboration between “victims” and “those who sexually harm” services are essential given Aboriginal and Torres Strait Islander C&YP who sexually harm others may have also been victims of sexual assault or physical violence and intergenerational trauma. By working with the whole family and community, a collaborative approach is more likely than the current service model to develop cultural safety and thus increase the accessibility of sexual assault services.

  2. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety: Steam Generators. 2011 Update

    International Nuclear Information System (INIS)

    2011-11-01

    At present there are over four hundred forty operational nuclear power plants (NPPs) in IAEA Member States. Ageing degradation of the systems, structures of components during their operational life must be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This IAEA-TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuteriumuranium (CANDU) reactor, boiling water reactor (BWR), pressurized water reactor (PWR), and water moderated, water cooled energy reactor (WWER) plants are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. Since the reports are written from a safety perspective, they do not address life or life cycle management of the plant components, which involves the integration of ageing management and economic planning. The target audience of the reports consists of technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific plant components addressed in the reports. The component addressed in the present publication is the steam

  3. Environmental Safety of the Use of Major Surfactant Classes in North America

    Science.gov (United States)

    Cowan-Ellsberry, Christina; Belanger, Scott; Dorn, Philip; Dyer, Scott; McAvoy, Drew; Sanderson, Hans; Versteeg, Donald; Ferrer, Darci

    2014-01-01

    This paper brings together over 250 published and unpublished studies on the environmental properties, fate, and toxicity of the four major, high-volume surfactant classes and relevant feedstocks. The surfactants and feedstocks covered include alcohol sulfate or alcohol sulfate (AS), alcohol ethoxysulfate (AES), linear alkylbenzene sulfonate (LAS), alcohol ethoxylate (AE), and long-chain alcohol (LCOH). These chemicals are used in a wide range of personal care and cleaning products. To date, this is the most comprehensive report on these substance's chemical structures, use, and volume information, physical/chemical properties, environmental fate properties such as biodegradation and sorption, monitoring studies through sewers, wastewater treatment plants and eventual release to the environment, aquatic and sediment toxicity, and bioaccumulation information. These data are used to illustrate the process for conducting both prospective and retrospective risk assessments for large-volume chemicals and categories of chemicals with wide dispersive use. Prospective risk assessments of AS, AES, AE, LAS, and LCOH demonstrate that these substances, although used in very high volume and widely released to the aquatic environment, have no adverse impact on the aquatic or sediment environments at current levels of use. The retrospective risk assessments of these same substances have clearly demonstrated that the conclusions of the prospective risk assessments are valid and confirm that these substances do not pose a risk to the aquatic or sediment environments. This paper also highlights the many years of research that the surfactant and cleaning products industry has supported, as part of their environmental sustainability commitment, to improve environmental tools, approaches, and develop innovative methods appropriate to address environmental properties of personal care and cleaning product chemicals, many of which have become approved international standard methods. PMID

  4. Development of nuclear fuel cycle technologies - bases of long-term provision of fuel and environmental safety of nuclear power

    International Nuclear Information System (INIS)

    Solonin, M.I.; Polyakov, A.S.; Zakharkin, B.S.; Smelov, V.S.; Nenarokomov, E.A.; Mukhin, I.V.

    2000-01-01

    To-day nuclear power is one of the options, however, to-morrow it may become the main source of the energy, thus, providing for the stable economic development for the long time to come. The availability of the large-scale nuclear power in the foreseeable future is governed by not only the safe operation of nuclear power plants (NPP) but also by the environmentally safe management of spent nuclear fuel, radioactive waste conditioning and long-term storage. More emphasis is to be placed to the closing of the fuel cycle in view of substantial quantities of spent nuclear fuel arisings. The once-through fuel cycle that is cost effective at the moment cannot be considered to be environmentally safe even for the middle term since the substantial build-up of spent nuclear fuel containing thousands of tons Pu will require the resolution of the safe management problem in the nearest future and is absolutely unjustified in terms of moral ethics as a transfer of the responsibility to future generations. The minimization of radioactive waste arisings and its radioactivity is only feasible with the closed fuel cycle put into practice and some actinides and long-lived fission radionuclides burnt out. The key issues in providing the environmentally safe fuel cycle are efficient processes of producing fuel for NPP, radionuclide after-burning included, a long-term spent nuclear fuel storage and reprocessing as well as radioactive waste management. The paper deals with the problems inherent in producing fuel for NPP with a view for the closed fuel cycle. Also discussed are options of the fuel cycle, its effectiveness and environmental safety with improvements in technologies of spent nuclear fuel reprocessing and long-lived radionuclide partitioning. (authors)

  5. Development of nuclear fuel cycle technologies - bases of long-term provision of fuel and environmental safety of nuclear power

    Energy Technology Data Exchange (ETDEWEB)

    Solonin, M I; Polyakov, A S; Zakharkin, B S; Smelov, V S; Nenarokomov, E A; Mukhin, I V [SSC, RF, A.A. Bochvar ALL-Russia Research Institute of Inorganic Materials, Moscow (Russian Federation)

    2000-07-01

    To-day nuclear power is one of the options, however, to-morrow it may become the main source of the energy, thus, providing for the stable economic development for the long time to come. The availability of the large-scale nuclear power in the foreseeable future is governed by not only the safe operation of nuclear power plants (NPP) but also by the environmentally safe management of spent nuclear fuel, radioactive waste conditioning and long-term storage. More emphasis is to be placed to the closing of the fuel cycle in view of substantial quantities of spent nuclear fuel arisings. The once-through fuel cycle that is cost effective at the moment cannot be considered to be environmentally safe even for the middle term since the substantial build-up of spent nuclear fuel containing thousands of tons Pu will require the resolution of the safe management problem in the nearest future and is absolutely unjustified in terms of moral ethics as a transfer of the responsibility to future generations. The minimization of radioactive waste arisings and its radioactivity is only feasible with the closed fuel cycle put into practice and some actinides and long-lived fission radionuclides burnt out. The key issues in providing the environmentally safe fuel cycle are efficient processes of producing fuel for NPP, radionuclide after-burning included, a long-term spent nuclear fuel storage and reprocessing as well as radioactive waste management. The paper deals with the problems inherent in producing fuel for NPP with a view for the closed fuel cycle. Also discussed are options of the fuel cycle, its effectiveness and environmental safety with improvements in technologies of spent nuclear fuel reprocessing and long-lived radionuclide partitioning. (authors)

  6. Traveling by Bus Instead of Car on Urban Major Roads: Safety Benefits for Vehicle Occupants, Pedestrians, and Cyclists.

    Science.gov (United States)

    Morency, Patrick; Strauss, Jillian; Pépin, Félix; Tessier, François; Grondines, Jocelyn

    2018-04-01

    Some studies have estimated fatality and injury rates for bus occupants, but data was aggregated at the country level and made no distinction between bus types. Also, injured pedestrians and cyclists, as a result of bus travel, were overlooked. We compared injury rates for car and city bus occupants on specific urban major roads, as well as the cyclist and pedestrian injuries associated with car and bus travel. We selected ten bus routes along major urban arterials (in Montreal, Canada). Passenger-kilometers traveled were estimated from vehicle counts at intersections (2002-2010) and from bus passenger counts (2008). Police accident reports (2001-2010) provided injury data for all modes. Injury rates associated with car and bus travel were calculated for vehicle occupants, pedestrians, and cyclists. Injury rate ratios were also computed. The safety benefits of bus travel, defined as the number of vehicle occupant, cyclist, and pedestrian injuries saved, were estimated for each route. Overall, for all ten routes, the ratio between car and bus occupant injury rates is 3.7 (95% CI [3.4, 4.0]). The rates of pedestrian and cyclist injuries per hundred million passenger-kilometers are also significantly greater for car travel than that for bus travel: 4.1 (95% CI [3.5, 4.9]) times greater for pedestrian injuries; 5.3 (95% CI [3.8, 7.6]) times greater for cyclist injuries. Similar results were observed for fatally and severely injured vehicle occupants, cyclists, and pedestrians. At the route level, the safety benefits of bus travel increase with the difference in injury rate associated with car and bus travel but also with the amount of passenger-kilometers by bus. Results show that city bus is a safer mode than car, for vehicle occupants but also for cyclists and pedestrians traveling along these bus routes. The safety benefits of bus travel greatly vary across urban routes; this spatial variation is most likely linked to environmental factors. Understanding the

  7. The provision and impact of online patient access to their electronic health records (EHR and transactional services on the quality and safety of health care: systematic review protocol

    Directory of Open Access Journals (Sweden)

    Freda Mold

    2013-09-01

    Full Text Available Background Innovators have piloted improvements in communication, changed patterns of practice and patient empowerment from online access to electronic health records (EHR. International studies of online services, such as prescription ordering, online appointment booking and secure communications with primary care, show good uptake of email consultations, accessing test results and booking appointments; when technologies and business process are in place. Online access and transactional services are due to be rolled out across England by 2015; this review seeks to explore the impact of online access to health records and other online services on the quality and safety of primary health care.Objective To assess the factors that may affect the provision of online patient access to their EHR and transactional services, and the impact of such access on the quality and safety of health care.Method Two reviewers independently searched 11 international databases during the period 1999–2012. A range of papers including descriptive studies using qualitative or quantitative methods, hypothesis-testing studies and systematic reviews were included. A detailed eligibility criterion will be used to shape study inclusion .A team of experts will review these papers for eligibility, extract data using a customised extraction form and use the Grading of Recommendations Assessment, Development and Evaluation (GRADE instrument to determine the quality of the evidence and the strengths of any recommendation. Data will then be descriptively summarised and thematically synthesised. Where feasible, we will perform a quantitative meta-analysis.Prospero (International Prospective Register of Systematic Reviews registration number: crd42012003091.

  8. Safety

    International Nuclear Information System (INIS)

    1998-01-01

    A brief account of activities carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented. These activities are reported under the headings: (1) Nuclear safety; (2) Industrial and health safety; (3) Radiation safety; and Fire protection

  9. The right scan, for the right patient, at the right time: The reorganization of major trauma service provision in England and its implications for radiologists

    International Nuclear Information System (INIS)

    Harvey, J.J.; West, A.T.H.

    2013-01-01

    Major trauma services in England are currently undergoing a radical overhaul with the formation of regional trauma networks and designated major trauma centres (MTCs). Radiology is scheduled to play a key role within major trauma care both in terms of 24/7 access to whole body computed tomography (WBCT) and interventional radiology (IR) services, as well as providing immediate expert imaging guidance to the trauma team. This review examines the rationale behind trauma networks, as well as drawing attention to the new Royal College of Radiologists' standards for major trauma imaging. It attempts to address radiologists' understandable concerns about the inappropriate use of WBCT, radiation dose, and intravenous contrast medium risks. Reporting whole-body CT for trauma patients is difficult, covering multiple body regions, with great pressure to provide a rapid and accurate report to the trauma team. The benefits of standardized reports, dual-radiologist reporting, and the use of organ injury severity grading are explored to aid succinct communication of findings and further guide patient management

  10. The drone as an additional risk factor due to conditions not provided for in radiological safety at major events

    International Nuclear Information System (INIS)

    Oliveira, Gilberto de Jesus

    2015-01-01

    Major international events are potential targets of terrorist actions, seeking instant publicity that events of this magnitude provide, with the intention of causing terror and disseminate its power to a large number of people worldwide. In this context, the critical analysis of additional risk factor linked to procedures and protocols adopted on radiation safety is important. The possibility of unforeseen situations of risk, especially those resulting from the current global technological development, is a fact. Radioactive material can be used in this type of terrorism in a wide range of devices and illicit trafficking of this material is a reality that worries the International Atomic Energy Agency. In the current technological development scenario of the world, the potential occurrence of terrorist acts using drones combined with radioactive material dispersal devices, is real. The recent history of drones incidents presents cases where, despite not having been necessarily terrorist motivation, their circumstances and characteristics favor the occurrence of malicious acts. This paper proposes to alert the need of updating the current security protocols, considering the potential association of this technology with radioactive dispersal devices. (author)

  11. A Critical Analysis Of The Majority Judgment In F V Minister Of Safety And Security 2012 1 Sa 536 (Cc

    Directory of Open Access Journals (Sweden)

    James Linscott

    2014-12-01

    Full Text Available The majority judgment of Mogoeng CJ in F v Minister of Safety and Security 2012 1 SA 536 (CC purports to be a straightforward application of the reasoning of the Constitutional Court in K v Minister of Safety and Security 2005 6 SA 419 (CC, in which the court updated and constitutionalised the "standard test" for vicarious liability in deviation cases originally set out in Minister of Police v Rabie 1986 1 SA 117 (A by holding that constitutional and other policy norms now play an important role in deciding questions of vicarious liability. However, it is respectfully submitted that a close reading of the majority judgment in F reveals that the judge misconstrues several key concepts related to the doctrine of vicarious liability. In particular, the judge seems to suggest that there are separate and different tests for vicarious liability in instances where an employee has plainly committed a delict in the course and scope of his employment, and where he has to some extent deviated from his employment duties. In fact, there is a single overarching test for vicarious liability - the course and scope rule - but various subsidiary tests are used by the courts to address difficult or borderline cases. It is also questionable whether F truly is a "typical deviation case", as the judge asserts. The judge then applies the constitutionalised test for vicarious liability originally set out in K in a manner which is subtly, but significantly, different from how it was deployed in that case. In particular, Mogoeng CJ's implication that it is not necessary for a court to consider the second leg of the Rabie test in circumstances where the employee wrongdoer has clearly subjectively intended to further the interests of his employer is undesirable and should not be supported. Furthermore, the judge identifies the question of whether or not there is an "intimate link" between the conduct of the employee wrongdoer and the business of his employer as one of the

  12. Provisions distributed

    NARCIS (Netherlands)

    Martin Olsthoorn; Evert Pommer; Michiel Ras; Ab van der Torre; Jean Marie Wildeboer Schut

    2017-01-01

    Original title: Voorzieningen verdeeld Citizens ‘profit’ from the government when they receive income support because they are unable to generate an income themselves. They also profit when they make use of provisions such as care, support, education, public transport, sport, culture

  13. Efficacy and safety of deep transcranial magnetic stimulation for major depression: a prospective multicenter randomized controlled trial.

    Science.gov (United States)

    Levkovitz, Yechiel; Isserles, Moshe; Padberg, Frank; Lisanby, Sarah H; Bystritsky, Alexander; Xia, Guohua; Tendler, Aron; Daskalakis, Zafiris J; Winston, Jaron L; Dannon, Pinhas; Hafez, Hisham M; Reti, Irving M; Morales, Oscar G; Schlaepfer, Thomas E; Hollander, Eric; Berman, Joshua A; Husain, Mustafa M; Sofer, Uzi; Stein, Ahava; Adler, Shmulik; Deutsch, Lisa; Deutsch, Frederic; Roth, Yiftach; George, Mark S; Zangen, Abraham

    2015-02-01

    Major depressive disorder (MDD) is a prevalent and disabling condition, and many patients do not respond to available treatments. Deep transcranial magnetic stimulation (dTMS) is a new technology allowing non-surgical stimulation of relatively deep brain areas. This is the first double-blind randomized controlled multicenter study evaluating the efficacy and safety of dTMS in MDD. We recruited 212 MDD outpatients, aged 22-68 years, who had either failed one to four antidepressant trials or not tolerated at least two antidepressant treatments during the current episode. They were randomly assigned to monotherapy with active or sham dTMS. Twenty sessions of dTMS (18 Hz over the prefrontal cortex) were applied during 4 weeks acutely, and then biweekly for 12 weeks. Primary and secondary efficacy endpoints were the change in the Hamilton Depression Rating Scale (HDRS-21) score and response/remission rates at week 5, respectively. dTMS induced a 6.39 point improvement in HDRS-21 scores, while a 3.28 point improvement was observed in the sham group (p=0.008), resulting in a 0.76 effect size. Response and remission rates were higher in the dTMS than in the sham group (response: 38.4 vs. 21.4%, p=0.013; remission: 32.6 vs. 14.6%, p=0.005). These differences between active and sham treatment were stable during the 12-week maintenance phase. dTMS was associated with few and minor side effects apart from one seizure in a patient where a protocol violation occurred. These results suggest that dTMS constitutes a novel intervention in MDD, which is efficacious and safe in patients not responding to antidepressant medications, and whose effect remains stable over 3 months of maintenance treatment. © 2015 World Psychiatric Association.

  14. Summary view on demonstration reactor safety

    International Nuclear Information System (INIS)

    Satoh, Kazuziro; Kotake, Shoji; Tsukui, Yutaka; Inagaki, Tatsutoshi; Miura, Masanori

    1991-01-01

    This work presents a summary view on safety design approaches for the demonstration fast breeder reactor (DFBR). The safety objective of DFBR is to be at lea as safe as a LWR. Major safety issues discussed in this paper are; reduction of sodium void reactivity worth, adoption of self-actuated mechanism in the backup shutdown system, use of the direct reactor auxiliary cooling system (DRACS), provision of the containment system. (author)

  15. SAFETY

    CERN Multimedia

    Niels Dupont

    2013-01-01

    CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

  16. Highlights from the literature on accident causation and system safety: Review of major ideas, recent contributions, and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Saleh, J.H., E-mail: jsaleh@gatech.ed [School of Aerospace Engineering, Georgia Institute of Technology (United States); Marais, K.B. [School of Aeronautics and Astronautics, Purdue University (United States); Bakolas, E.; Cowlagi, R.V. [School of Aerospace Engineering, Georgia Institute of Technology (United States)

    2010-11-15

    This work constitutes a short guide to the extensive but fragmented literature on accident causation and system safety. After briefly motivating the interest in accident causation and discussing the notion of a safety value chain, we delve into our multi-disciplinary review with discussions of Man Made Disasters, Normal Accident, and the High Reliability Organizations (HRO) paradigm. The HRO literature intersects an extensive literature on safety culture, a subject we then briefly touch upon. Following this discussion, we note that while these social and organizational contributions have significantly enriched our understanding of accident causation and system safety, they have important deficiencies and are lacking in their understanding of technical and design drivers of system safety and accident causation. These missing ingredients, we argue, were provided in part by the development of Probabilistic Risk Assessment (PRA). The idea of anticipating possible accident scenarios, based on the system design and configuration, as well as its technical and operational characteristics, constitutes an important contribution of PRA, which builds on and extends earlier contributions made by the development of Fault Tree and Event Tree Analysis. We follow the discussion of PRA with an exposition of the concept of safety barriers and the principle of defense-in-depth, both of which emphasize the functions and 'safety elements [that should be] deliberately inserted' along potential accident trajectories to prevent, contain, or mitigate accidents. Finally, we discuss two ideas that are emerging as foundational in the literature on system safety and accident causation, namely that system safety is a 'control problem', and that it requires a 'system theoretic' approach to be dealt with. We clarify these characterizations and indicate research opportunities to be pursued along these directions. We conclude this work with two general recommendations

  17. Highlights from the literature on accident causation and system safety: Review of major ideas, recent contributions, and challenges

    International Nuclear Information System (INIS)

    Saleh, J.H.; Marais, K.B.; Bakolas, E.; Cowlagi, R.V.

    2010-01-01

    This work constitutes a short guide to the extensive but fragmented literature on accident causation and system safety. After briefly motivating the interest in accident causation and discussing the notion of a safety value chain, we delve into our multi-disciplinary review with discussions of Man Made Disasters, Normal Accident, and the High Reliability Organizations (HRO) paradigm. The HRO literature intersects an extensive literature on safety culture, a subject we then briefly touch upon. Following this discussion, we note that while these social and organizational contributions have significantly enriched our understanding of accident causation and system safety, they have important deficiencies and are lacking in their understanding of technical and design drivers of system safety and accident causation. These missing ingredients, we argue, were provided in part by the development of Probabilistic Risk Assessment (PRA). The idea of anticipating possible accident scenarios, based on the system design and configuration, as well as its technical and operational characteristics, constitutes an important contribution of PRA, which builds on and extends earlier contributions made by the development of Fault Tree and Event Tree Analysis. We follow the discussion of PRA with an exposition of the concept of safety barriers and the principle of defense-in-depth, both of which emphasize the functions and 'safety elements [that should be] deliberately inserted' along potential accident trajectories to prevent, contain, or mitigate accidents. Finally, we discuss two ideas that are emerging as foundational in the literature on system safety and accident causation, namely that system safety is a 'control problem', and that it requires a 'system theoretic' approach to be dealt with. We clarify these characterizations and indicate research opportunities to be pursued along these directions. We conclude this work with two general recommendations: (1) that more fundamental

  18. Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

  19. Safety

    International Nuclear Information System (INIS)

    2001-01-01

    This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

  20. Historical evolution of process safety and major-accident hazards prevention in Spain. Contribution of the pioneer Joaquim Casal.

    OpenAIRE

    Planas Cuchi, Eulàlia; Arnaldos Viger, Josep; Darbra Roman, Rosa Maria; Muñoz Messineo, Miguel Ángel; Pastor Ferrer, Elsa; Vílchez Sánchez, Juan Antonio

    2013-01-01

    This paper aims at presenting the evolution of process safety in Spain from various points of view. In first place, a study of the accidents occurred in this country in the process industry and in the transportation of chemical substances is presented. After this, the starting point of the process safety research in Spain and its evolution during the years are explained. The importance of this topic has also been reflected in the chemical engineering studies in some Spanish universities. Ther...

  1. Occupational health provision and health surveillance in the semiconductor industry.

    Science.gov (United States)

    Kinoulty, Mary; Williams, Nerys

    2006-03-01

    To identify the nature of occupational health provision in UK semiconductor-manufacturing plants. To identify the level of industry compliance with legal health surveillance requirements. A national inspection programme was carried out by Health & Safety Executive inspectors using a developed protocol. A wide range of occupational health provision was identified from none to use of an accredited specialist. The majority of work was of a reactive nature even where there was specialist occupational health input. Seven companies were identified as not meeting legal compliance and one as having unacceptable compliance for health surveillance. The spectrum of occupational health provision was very wide. Where health surveillance was provided, it was poorly targeted with limited interpretation and feedback to management.

  2. ACTIVITIES OF SAINT-PETERSBURG RESEARCH INSTITUTE OF RADIATION HYGIENE AFTER PROFESSOR P.V. RAMZAEV FOR PROVISION OF RADIATION SAFETY OF XXII WINTER OLYMPIC AND XI WINTER PARALYMPICS GAMES OF 2014 IN SOCHI CITY

    Directory of Open Access Journals (Sweden)

    I. K. Romanovich

    2014-01-01

    Full Text Available The article contains an analysis of the experience of Rospotrebnadzor radiological units’ activities for  radiation  safety  provision  of  the  participators  and  guests  of  XXII  Winter  Olympic  Games  in  Sochi  and  also of Sochi city inhabitants as during the period of preparations for the Games so during the period of the Olympic and Paralympics Games. Peculiarities of organization of activities of Rospotrebnadzor specialists are considered for  the  preparation  period  and  main  period,  the  occurred  problems  of  technical  and  methodical  provision  of radiation control which was carried out for the purpose of counteraction to possible actions of radiation terrorism are considered as well. The role is noted of the specialists of Radiation Hygiene Institute in the methodical and organizational provision of the whole complex of carried-out activities.

  3. Act No. 87-565 of 22 July 1987 on the organization of public safety measures, forestry protection against fires and the prevention of major risks

    International Nuclear Information System (INIS)

    1987-01-01

    As defined by this Act, the objective of the public safety measures is to prevent all types of major risks and to protect persons, property and the environment, including forests, against accidents, disasters and catastrophes. It deals with the conditions for preparing preventive measures and for implementing necessary measures in case of major risks or accidents. The preparation and organization of assistance are determined within the framework of ORSEC (ORganisation des SECours) plans and emergency plans; the first assess the possibilities for facing up to disasters while the latter provide for measures and means to overcome a particular risk [fr

  4. Assessment of safety levels in operation rooms at two major tertiary care public hospitals of Karachi. Safe surgery saves life

    International Nuclear Information System (INIS)

    Minhas, M.S.; Muzzammil, M.; Effendi, J.

    2017-01-01

    The objectives of this study are to determine the knowledge and attitude towards surgical safety among the health care professionals including surgeons, anaesthetist, hospital administrators, and operation room personnel and raise awareness towards the importance of safe surgery. Method: A pilot cross- sectional study of 543 healthcare providers working in the operating rooms and the surgical intensive care units was conducted in two tertiary care hospitals, within a study period of one month. A structured questionnaire was constructed and an informed verbal consent was taken. The questionnaire was then distributed; data collected and analysed on SPSS 20.0. Results: A total of 543 respondents participated in the study out of which there were 375 (69%) men and 168 (31%) women. The ages ranged between 23-58 years, mean 40.5+-24.74. There were 110 (20.25%) surgeons, 58 (10.68%) anaesthetist, 132 (24.30%) trainees, 125 (23.02%) technicians, and were 118 (21.73%) nurses. The question regarding briefing operation room personnel is important for patient safety was agreed by 532 (98%) respondents. Amongst the respondents, 239 (44%) did not feel safe to be operated in their own setup. Team communication improvement through the check list implementation was agreed by 483 (89%) respondents. 514 (94.7%) opted for the checklist to be used while they are being operated. That operation room personnel frequently disregard established protocols was agreed by 374 (69%) respondents. 193 (35.54%) of the respondents stated that it is difficult for them to speak up in the or if they perceive a problem with patient care. Conclusion: Operation room personnel were not aware of several important areas related to briefing, communication, safety attitude, following standard protocols and use of WHO Surgical Safety check list. A pre-post intervention study should be conducted after formal introduction of the Checklist. Successful implementation will require taking all stake holders on board

  5. Will the energetic choices be guided by the major accidents? What are the talents used for safety?

    International Nuclear Information System (INIS)

    Chevallier, Bruno

    2014-01-01

    The control of safety problems requires at first a good knowledge and the control of risks; this control is among other things based on the detailed exploitation of the first hand experiences and more generally on the history and the analysis of all the serious accidents occurred in the industrial sector. Moreover, the control of risks influence the regulations which evolve with the knowledge. (O.M.)

  6. Safety and efficacy of immediate postoperative feeding and bowel stimulation to prevent ileus after major gynecologic surgical procedures.

    Science.gov (United States)

    Fanning, James; Hojat, Rod

    2011-08-01

    Postoperative ileus is a major complication of abdominal surgical procedures To evaluate the incidence of ileus and gastrointestinal morbidity in patients who received immediate postoperative feeding and bowel stimulation after undergoing major gynecologic surgical procedures. During a 5-year period, the authors tracked demographic, surgical outcome, and follow-up information for 707 patients who underwent major gynecologic operations. All patients received the same postoperative orders, including immediate feeding of a diet of choice and bowel stimulation with 30 mL of magnesium hydroxide (milk of magnesia) twice daily until bowel movements occurred. Of 707 patients, 6 (<1%) had postoperative ileus. No patients experienced postoperative bowel obstruction and 2 patients (0.3%) had postoperative intestinal leak. No serious adverse effects associated with bowel stimulation were reported. Immediate postoperative feeding and bowel stimulation is a safe and effective approach to preventing ileus in patients who undergo major gynecologic surgical procedures.

  7. Escitalopram for the management of major depressive disorder: a review of its efficacy, safety, and patient acceptability

    OpenAIRE

    Kirino, Eiji

    2012-01-01

    Eiji Kirino1,21Department of Psychiatry, Juntendo University Shizuoka Hospital, Shizuoka, Japan; 2Department of Psychiatry, Juntendo University School of Medicine, Tokyo, JapanAbstract: Escitalopram (escitalopram oxalate; Cipralex®, Lexapro®) is a selective serotonin reuptake inhibitor (SSRI) used for the treatment of major depressive disorder (MDD) and anxiety disorder. This drug exerts a highly selective, potent, and dose-dependent inhibitory effect on the human serotonin tr...

  8. SAFETY

    CERN Multimedia

    M. Plagge, C. Schaefer and N. Dupont

    2013-01-01

    Fire Safety – Essential for a particle detector The CMS detector is a marvel of high technology, one of the most precise particle measurement devices we have built until now. Of course it has to be protected from external and internal incidents like the ones that can occur from fires. Due to the fire load, the permanent availability of oxygen and the presence of various ignition sources mostly based on electricity this has to be addressed. Starting from the beam pipe towards the magnet coil, the detector is protected by flooding it with pure gaseous nitrogen during operation. The outer shell of CMS, namely the yoke and the muon chambers are then covered by an emergency inertion system also based on nitrogen. To ensure maximum fire safety, all materials used comply with the CERN regulations IS 23 and IS 41 with only a few exceptions. Every piece of the 30-tonne polyethylene shielding is high-density material, borated, boxed within steel and coated with intumescent (a paint that creates a thick co...

  9. SAFETY

    CERN Multimedia

    C. Schaefer and N. Dupont

    2013-01-01

      “Safety is the highest priority”: this statement from CERN is endorsed by the CMS management. An interpretation of this statement may bring you to the conclusion that you should stop working in order to avoid risks. If the safety is the priority, work is not! This would be a misunderstanding and misinterpretation. One should understand that “working safely” or “operating safely” is the priority at CERN. CERN personnel are exposed to different hazards on many levels on a daily basis. However, risk analyses and assessments are done in order to limit the number and the gravity of accidents. For example, this process takes place each time you cross the road. The hazard is the moving vehicle, the stake is you and the risk might be the risk of collision between both. The same principle has to be applied during our daily work. In particular, keeping in mind the general principles of prevention defined in the late 1980s. These principles wer...

  10. The material concept in German light water reactors. Contribution to plant safety economic efficiency and failure provision; Das Werkstoffkonzept in deutschen Leichtwasserreaktoren. Beitrag zur Anlagensicherheit, Wirtschaftlichkeit und Schadensvorsorge

    Energy Technology Data Exchange (ETDEWEB)

    Ilg, Ulf [EnBW Kernkraft GmbH (Germany). Kernkraftwerk Philippsburg; Koenig, Guenter [EnBW Kernkraft GmbH (Germany). Kernkraftwerk Neckarwestheim; Erve, Manfred [AREVA NP GmbH, Erlangen (Germany)

    2008-07-01

    In the design and construction stage of nuclear power plants relevant decisions may affect the service life of a component, and thus influence safety and availability of the plant. The German ''basic safety concept'' has an important effect on the quality of the BOL (begin of life) status. Materials selection and qualification are of significant importance for the component lifetime and the profitability of the plant. Examples for the implementation of this concept are demonstrated for the steam generator tubing material Incoloy 800, the inside-plated ferritic compound tubes as control rod drive mechanism nozzle through the RPV head of BWR plants that are not susceptible for corrosion enhanced cracking that was observed for Inconel 600 tubing. A fundamental failure analysis of crack formation in Ti stabilized austenitic pipes of BWR plants found since 1993 were definitely identified as intergranular stress corrosion caused by a local sensitization of the welding process induced overheated structured in the heat affected zone. This allowed target-oriented mitigation measures. The safety culture implemented in German nuclear plants in connection with the break preclusion or integrity concept, respectively, including a continuous actualization with respect to the state-of-the art are the technical prerequisites for damage precaution and possible life time extension.

  11. Safety

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    Aspects of fission reactors are considered - control, heat removal and containment. Brief descriptions of the reactor accidents at the SL-1 reactor (1961), Windscale (1957), Browns Ferry (1975), Three Mile Island (1979) and Chernobyl (1986) are given. The idea of inherently safe reactor designs is discussed. Safety assessment is considered under the headings of preliminary hazard analysis, failure mode analysis, event trees, fault trees, common mode failure and probabalistic risk assessments. These latter can result in a series of risk distributions linked to specific groups of fault sequences and specific consequences. A frequency-consequence diagram is shown. Fatal accident incidence rates in different countries including the United Kingdom for various industries are quoted. The incidence of fatal cancers from occupational exposure to chemicals is tabulated. Human factors and the acceptability of risk are considered. (U.K.)

  12. Efficacy and safety of escitalopram versus desvenlafaxine in the treatment of major depression: A preliminary 1-year prospective randomized open label comparative trial

    Directory of Open Access Journals (Sweden)

    Brij Mohan Gupta

    2016-01-01

    Full Text Available Aim and Objective: To compare efficacy and safety of escitalopram with desvenlafaxine in the treatment of major depression.Materials and Methods: A total of 60 patients of depression were randomized into two groups after meeting inclusion criterion. In the first 3 weeks, escitalopram 10 mg/day was given and then 20 mg/day for the next 3 weeks in group 1 (n = 30. Desvenlafaxine in the first 3 weeks was given 50 mg/day and 100 mg/day for the next 3 weeks in group 2 (n = 30. The parameters evaluated during the study were efficacy assessments byHamilton Scale of Rating Depression (HAM-D, Hamilton Rating Scale of Anxiety (HAM-A, and Clinical Global Impression (CGI. Safety assessments were done by UKU-scale. Results: Escitalopram and desvenlafaxine significantly (P < 0.001, reduced HAM-D, HAM-A, and CGI scores from their respective base lines. However, on comparison failed show any statistical difference at 3 and 6 weeks of treatment. Escitalopram and desvenlafaxine were both found to be safe and well-tolerated and there was not much difference between the two groups as evident from UKU Scale and their effect on various biochemical parameters. Conclusion: The present study demonstrated similar efficacy and safety in reducing depression and anxiety with both escitalopram and desvenlafaxine, but clinical superiority of one drug over the other cannot be concluded due to limitations of the small sample size.

  13. Escitalopram for the management of major depressive disorder: a review of its efficacy, safety, and patient acceptability

    Directory of Open Access Journals (Sweden)

    Kirino E

    2012-12-01

    Full Text Available Eiji Kirino1,21Department of Psychiatry, Juntendo University Shizuoka Hospital, Shizuoka, Japan; 2Department of Psychiatry, Juntendo University School of Medicine, Tokyo, JapanAbstract: Escitalopram (escitalopram oxalate; Cipralex®, Lexapro® is a selective serotonin reuptake inhibitor (SSRI used for the treatment of major depressive disorder (MDD and anxiety disorder. This drug exerts a highly selective, potent, and dose-dependent inhibitory effect on the human serotonin transport. By inhibiting the reuptake of serotonin into presynaptic nerve endings, this drug enhances the activity of serotonin in the central nervous system. Escitalopram also has allosteric activity. Moreover, the possibility of interacting with other drugs is considered low. This review covers randomized, controlled studies that enrolled adult patients with MDD to evaluate the efficacy of escitalopram based on the Montgomery–Asberg Depression Rating Scale and the Hamilton Depression Rating Scale. The results showed that escitalopram was superior to placebo, and nearly equal or superior to other SSRIs (eg, citalopram, paroxetine, fluoxetine, sertraline and serotonin-noradrenaline reuptake inhibitors (eg, duloxetine, sustained-release venlafaxine. In addition, with long-term administration, escitalopram has shown a preventive effect on MDD relapse and recurrence. Escitalopram also showed favorable tolerability, and associated adverse events were generally mild and temporary. Discontinuation symptoms were milder with escitalopram than with paroxetine. In view of the patient acceptability of escitalopram, based on both a meta-analysis and a pooled analysis, this drug was more favorable than other new antidepressants. The findings indicate that escitalopram achieved high continuity in antidepressant drug therapy.Keywords: escitalopram, MDD, SSRI, allosteric action, discontinuation symptoms

  14. Assessment and management of ageing of major nuclear power plant components important to safety: In-containment instrumentation and control cables. Volume I

    International Nuclear Information System (INIS)

    2000-12-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing error) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This publication is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canadian deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including the Soviet designed 'water moderated and water cooled energy reactors' (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts and managers from NPPs and from regulatory, plant design, manufacturing

  15. Assessment and management of ageing of major nuclear power plant components important to safety: In-containment instrumentation and control cables. Volume II

    International Nuclear Information System (INIS)

    2000-12-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing error) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This publication is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canadian deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including the Soviet designed 'water moderated and water cooled energy reactors' (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts and managers from NPPs and from regulatory, plant design, manufacturing

  16. Ionising radiations. Joint consultative document. Supplementary proposals for provision on radiological protection and draft advice from the National Radiological Protection Board to the Health and Safety Commission

    International Nuclear Information System (INIS)

    1979-01-01

    The consultative document is in two parts. Part 1 indicates the amendments to the first consultative document which would be required in order to implement (in the United Kingdom) the 1978 Draft Euratom Directive (on Basic Safety Standards for the health protection of the general public and workers against the dangers of ionising radiations). Part 2 deals with the system of dose limitation contained within the Euratom Directive. This aspect is discussed, in relation to the Articles of the Directive, under the following headings: limitation of doses for controllable exposures, limits of doses for exposed workers, limitation of doses for apprentices and students, planned special exposures, dose limits for members of the public. The Commission of the European Communities proposals for a draft Directive on Radiological Protection are reproduced as an Appendix, without Annexes. (U.K.)

  17. International views on nuclear safety

    International Nuclear Information System (INIS)

    Birkhofer, A.

    2002-01-01

    Safety has always been an important objective in nuclear technology. Starting with a set of sound physical principles and prudent design approaches, safety concepts have gradually been refined and cover now a wide range of provisions related to design, quality and operation. Research, the evaluation of operating experiences and probabilistic risk assessments constitute an essential basis and international co-operation plays a significant role in that context. Concerning future developments a major objective for new reactor concepts, such as the EPR, is to practically exclude a severe core damage accident with large scale consequences outside the plant. (author)

  18. Development and application of the Safe Performance Index as a risk-based methodology for identifying major hazard-related safety issues in underground coal mines

    Science.gov (United States)

    Kinilakodi, Harisha

    The underground coal mining industry has been under constant watch due to the high risk involved in its activities, and scrutiny increased because of the disasters that occurred in 2006-07. In the aftermath of the incidents, the U.S. Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which strengthened the existing regulations and mandated new laws to address the various issues related to a safe working environment in the mines. Risk analysis in any form should be done on a regular basis to tackle the possibility of unwanted major hazard-related events such as explosions, outbursts, airbursts, inundations, spontaneous combustion, and roof fall instabilities. One of the responses by the Mine Safety and Health Administration (MSHA) in 2007 involved a new pattern of violations (POV) process to target mines with a poor safety performance, specifically to improve their safety. However, the 2010 disaster (worst in 40 years) gave an impression that the collective effort of the industry, federal/state agencies, and researchers to achieve the goal of zero fatalities and serious injuries has gone awry. The Safe Performance Index (SPI) methodology developed in this research is a straight-forward, effective, transparent, and reproducible approach that can help in identifying and addressing some of the existing issues while targeting (poor safety performance) mines which need help. It combines three injury and three citation measures that are scaled to have an equal mean (5.0) in a balanced way with proportionate weighting factors (0.05, 0.15, 0.30) and overall normalizing factor (15) into a mine safety performance evaluation tool. It can be used to assess the relative safety-related risk of mines, including by mine-size category. Using 2008 and 2009 data, comparisons were made of SPI-associated, normalized safety performance measures across mine-size categories, with emphasis on small-mine safety performance as compared to large- and

  19. Decree No 524 of 8 June 1982 of the President of the Republic implementing CEC. Directive No 77/576 for standardization of Member States' legislative, regulatory and administrative provisions on safety signs in workplaces and CEC Directive No 79/640 amending the Annexes of the latter

    International Nuclear Information System (INIS)

    1982-01-01

    This Decree implements at national level Directive No 77/576 of 27 July 1977 of the Commission of the European Communities, as amended by Directive No 79/640 of 21 June 1979. The Directive provides for the standardization by Member States of their legislative, regulatory and administrative provisions concerning safety signs in workplaces, including radioactivity symbols. (NEA) [fr

  20. Ptaquiloside, the major carcinogen of bracken fern, in the pooled raw milk of healthy sheep and goats: an underestimated, global concern of food safety.

    Science.gov (United States)

    Virgilio, Antonella; Sinisi, Annamaria; Russo, Valeria; Gerardo, Salvatore; Santoro, Adriano; Galeone, Aldo; Taglialatela-Scafati, Orazio; Roperto, Franco

    2015-05-20

    Bracken fern (Pteridium aquilinum) is a worldwide plant containing toxic substances, which represent an important chemical hazard for animals, including humans. Ptaquiloside, 1, a norsesquiterpenoid glucoside, is the major carcinogen of bracken detected in the food chain, particularly in the milk from farm animals. To date, ptaquiloside has been shown in the milk of cows feeding on a diet containing bracken fern. This is the first study that shows the systematic detection of ptaquiloside, 1, and reports its direct quantitation in pooled raw milk of healthy sheep and goats grazing on bracken. Ptaquiloside, 1, was detected by a sensitive method based on the chemical conversion of ptaquiloside, 1, into bromopterosine, 4, following gas chromatography-mass spectrometry (GC-MS) analysis. The presence of ptaquiloside, 1, possibly carcinogenic to humans, in the milk of healthy animals is an unknown potential health risk, thus representing a harmful and potential global concern of food safety.

  1. Safety and acceptability of transcranial direct current stimulation for the acute treatment of major depressive episodes: Analysis of individual patient data.

    Science.gov (United States)

    Moffa, Adriano H; Brunoni, André R; Fregni, Felipe; Palm, Ulrich; Padberg, Frank; Blumberger, Daniel M; Daskalakis, Zafiris J; Bennabi, Djamila; Haffen, Emmanuel; Alonzo, Angelo; Loo, Colleen K

    2017-10-15

    Transcranial direct current stimulation (tDCS) is a non-invasive brain stimulation modality that has been increasingly used for major depressive disorder (MDD) treatment. Although studies in healthy volunteers showed that the technique is well-tolerated, tDCS safety and acceptability have not been sufficiently explored in patients with MDD. We collected individual patient data from 6 randomized clinical trials that had been previously identified in a systematic review and meta-analysis. Primary outcomes were safety (rate of adverse events) and acceptability (rate of dropouts). Secondary outcomes were clinical, demographic and treatment predictors of the primary outcomes. Dropout rates between active (8.8%) and sham (12%) groups were not significantly different (OR= 0.7, p=0.38). Adverse event rates between active (73.5%) and sham (68.3%) groups were not significantly different (OR= 1.4, p= 0.23). Higher current densities were associated with lower adverse event rates. Dropout reasons were not systematically reported and adverse events were not collected using questionnaires standardized across studies. Active tDCS is as acceptable and safe as sham tDCS, as found in randomized clinical trials of MDD. Copyright © 2017. Published by Elsevier B.V.

  2. Emergency planning and the Control of Major Accident Hazards (COMAH/Seveso II) Directive: An approach to determine the public safety zone for toxic cloud releases

    International Nuclear Information System (INIS)

    O'Mahony, Mary T.; Doolan, Donal; O'Sullivan, Alice; Hession, Michael

    2008-01-01

    The EU Control of Major Accidents Hazards Directive (Seveso II) requires an external emergency plan for each top tier site. This paper sets out a method to build the protection of public health into emergency planning for Seveso sites in the EU. The method involves the review of Seveso site details prescribed under the directive. The site safety report sets out the potential accident scenarios. The safety report's worst-case scenario, and chemical involved, is used as the basis for the external emergency plan. A decision was needed on the appropriate threshold value to use as the level of concern to protect public health. The definitions of the regulatory standards (air quality standards and occupational standards) in use were studied, how they are derived and for what purpose. The 10 min acute exposure guideline level (AEGL) for a chemical is recommended as the threshold value to inform decisions taken to protect public health from toxic cloud releases. The area delimited by AEGL 1 defines the population who may be concerned about being exposed. They need information based on comprehensive risk assessment. The area delimited by AEGL 2 defines the population for long-term surveillance when indicated and may include first responders. The area delimited by AEGL 3 defines the population who may present acutely to the medical services. It ensures that the emergency responders site themselves safely. A standard methodology facilitates discussions with plant operators and concerned public. Examples show how the methodology can be adapted to suit explosive risk and response to fire

  3. Malaria and blood transfusion: major issues of blood safety in malaria-endemic countries and strategies for mitigating the risk of Plasmodium parasites.

    Science.gov (United States)

    Abdullah, Saleh; Karunamoorthi, Kaliyaperumal

    2016-01-01

    Malaria inflicts humankind over centuries, and it remains as a major threat to both clinical medicine and public health worldwide. Though hemotherapy is a life-sustaining modality, it continues to be a possible source of disease transmission. Hence, hemovigilance is a matter of grave concern in the malaria-prone third-world countries. In order to pursue an effective research on hemovigilance, a comprehensive search has been conducted by using the premier academic-scientific databases, WHO documents, and English-language search engines. One hundred two appropriate articles were chosen for data extraction, with a particular reference to emerging pathogens transmitted through blood transfusion, specifically malaria. Blood donation screening is done through microscopic examination and immunological assays to improve the safety of blood products by detection major blood-borne pathogens, viz., HIV, HBV, HCV, syphilis, and malarial parasites. Transfusion therapy significantly dwindles the preventable morbidity and mortality attributed to various illnesses and diseases, particularly AIDS, tuberculosis, and malaria. Examination of thick and thin blood smears are performed to detect positivity and to identify the Plasmodium species, respectively. However, all of these existing diagnostic tools have their own limitations in terms of sensitivity, specificity, cost-effectiveness, and lack of resources and skilled personnel. Globally, despite the mandate need of screening blood and its components according to the blood-establishment protocols, it is seldom practiced in the low-income/poverty-stricken settings. In addition, each and every single phase of transfusion chain carries sizable inherent risks from donors to recipients. Interestingly, opportunities also lie ahead to enhance the safety of blood-supply chain and patients. It can be achieved through sustainable blood-management strategies like (1) appropriate usage of precise diagnostic tools/techniques, (2) promoting

  4. A practical approach to Events Medicine provision.

    Science.gov (United States)

    Smith, Susan P; Cosgrove, Joseph F; Driscoll, Peter J; Smith, Andrew; Butler, John; Goode, Peter; Waldmann, Carl; Vallis, Christopher J; Topham, Fiona; Mythen, Michael Monty

    2017-08-01

    In the past three decades, mass casualty incidents have occurred worldwide at multiple sporting events and other mass gatherings. Organisational safety and healthcare provision can consequently be scrutinised post-event. Within the UK, such incidents in the 1980s provided incentives to improve medical services and subsequent high profile UK-based international sporting events (London Olympics and Paralympics 2012, Glasgow Commonwealth Games 2014, Rugby World Cup 2015) added a further catalyst for developing services. Furthermore in the aftermath of the abandoned France versus Germany association football match at the Stade de France ( Paris Terrorist Attacks, November 2015) and the 2016 UK report from HM Coroner on the Hillsborough Inquest , medical cover at sporting events is being further reviewed. Doctors providing spectator cover therefore need to have an awareness of their likely roles at sporting venues. Formal guidance exists in many countries for the provision of such cover but remains generic even though Events Medicine is increasingly recognised as a necessary service. The current evidence base is limited with best practice examples often anecdotally cited by acute care specialists (eg, emergency medicine) who provide cover. This article is therefore intended to present an overview for doctors of the knowledge and skills required to treat ill and injured spectators and enable them to adequately risk-assess venues in cooperation with other health and safety providers, including preparation for a major incident. It also gives guidance on how activity can be adequately assessed and how doctors can have management roles in Events Medicine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  5. Social Housing Provision in Copenhagen

    DEFF Research Database (Denmark)

    Tsenkova, Sasha; Vestergaard, Hedvig

    -profit housing providers, and a wide range of fiscal and regulatory instruments enhancing the competitive performance of the social housing sector. The research analyses recent housing policy measures and their impact on new social housing provision in Copenhagen. The emphasis is on the mix of housing policy......The paper provides an overview of trends and processes of change affecting new social housing provision in Denmark with a focus on Copenhagen. The local responses are reviewed within the context of changes to the unitary national housing system that functions with a robust range of private and non...... instruments implemented in three major policy domains-fiscal, financial and regulatory-to promote the production of new social housing. The system of new social housing provision is examined as a dynamic process of interaction between public and private institutions defining housing policy outcomes...

  6. TSO Role in Supporting the Regulatory Authority in View of Safety Culture

    International Nuclear Information System (INIS)

    Khamaza, A.; Vasilishin, A.

    2016-01-01

    Human and organizational factors are always of paramount importance at nuclear and radiation safety as well as in the safety regulation provision. Major NPP accidents occurred merely reaffirm this fact. The role of an authority that regulates nuclear safety increases each time in the aftermath of accidents perceived as a shock together with the importance of scientific and technical support. SEC NRS was established in 1987, the next year after the Chernobyl NPP accident aiming to strengthen supervision over works carried out at the nuclear industry enterprises. Currently SEC NRS provides comprehensive scientific and technical support to Rostechnadzor including safety review and regulatory legal documents development to regulate safety along with safety culture.

  7. Mirtazapine, a sedating antidepressant, and improved driving safety in patients with major depressive disorder: a prospective, randomized trial of 28 patients.

    Science.gov (United States)

    Shen, Jianhua; Moller, Henry J; Wang, Xuehua; Chung, Sharon A; Shapiro, Gilla K; Li, Xiuying; Shapiro, Colin M

    2009-03-01

    The objectives of the study were to investigate the effects of mirtazapine, a sedating antidepressant, on driving safety in major depressive disorder (MDD) patients and to observe the effect of mirtazapine on daytime alertness. Twenty-eight patients who met the DSM-IV criteria for MDD completed the study in a university teaching hospital. Half of these patients took mirtazapine 30 mg at bedtime for 30 days. A computerized driving simulator test (DST) and the Maintenance of Wakefulness Test (MWT) were conducted at baseline and on days 2, 9, 16, and 30 after commencement of antidepressant use. Fourteen untreated depressed patients performed a DST and MWT at baseline and on days 2 and 9 to evaluate the possibility of a learning effect. Data collection was from June 2005 through January 2006. There were significant linear effects of the treatment on road position at All Trials (p = .018) and on the morning sessions at 10:00 a.m. (p < .001) and 12:00 p.m. (p = .022) and on the number of crashes at All Trials (p = .034) and the 4:00 p.m. session (p = .050) for the group on active treatment. Compared with the values at baseline, those of road position at 10:00 a.m. significantly improved on days 2 (p < .05), 9 (p < .01), 16 (p < .01) and 30 (p < .01) and road position at 12:00 p.m. significantly improved on days 16 (p < .05) and 30 (p < .05). The number of crashes significantly decreased on day 30 (p < .05). The untreated patients showed no improvement in performance in any of the measures, suggesting that the results are not due to a learning effect. A sedating antidepressant can increase driving safety in MDD patients. clinicaltrials.gov Identifier: NCT00385437. ©Copyright 2009 Physicians Postgraduate Press, Inc.

  8. Efficacy, safety and tolerability of escitalopram in doses up to 50 mg in Major Depressive Disorder (MDD: an open-label, pilot study

    Directory of Open Access Journals (Sweden)

    Crawford Gordon M

    2011-03-01

    Full Text Available Abstract Background Escitalopram is licensed for use at doses up to 20 mg but is used clinically at higher doses. There is limited published data at higher doses and none in the treatment of Major Depressive Disorder (MDD. Methods This open-label, pilot study was designed to investigate the efficacy, safety and tolerability of escitalopram in doses up to 50 mg in MDD. It was conducted in 60 primary care patients with MDD who had not responded to adequate treatment with citalopram. Patients were treated with escalating doses of escitalopram up to 50 mg for up to 32 weeks until they achieved remission (Montgomery-Asberg Depression Rating Scale [MADRS] ≤8 or failed to tolerate the dose. Results Forty-two patients (70% completed the study. Twenty-one patients (35% achieved remission with 8 of the 21 patients (38% needing the 50 mg dose to achieve remission. Median time to remission was 24 weeks and median dose in remission was 30 mg. No significant safety issues were identified although tolerability appeared to decline above a dose of 40 mg with 26% of patients unable to tolerate 50 mg. Twelve (20% patients had adverse events leading to discontinuation. The most common adverse events were headache (35%, nausea, diarrhoea and nasopharyngitis (all 25%. Minor mean weight gain was found during the study, which did not appear to be dose-related. Half of the patients who completed the study chose to continue treatment with escitalopram rather than taper down the dose at 32 weeks. Conclusions Dose escalation with escitalopram above 20 mg may have a useful role in the management of patients with MDD, although further studies are needed to confirm this finding. Trial Registration ClinicalTrials.gov: NCT00785434

  9. Comparative efficacy and safety of Crocus sativus L. for treating mild to moderate major depressive disorder in adults: a meta-analysis of randomized controlled trials

    Directory of Open Access Journals (Sweden)

    Yang XY

    2018-05-01

    Full Text Available Xiangying Yang,1 Xiaolu Chen,1 Yixiao Fu,2 Qinghua Luo,2 Lian Du,2 Haitang Qiu,2 Tian Qiu,2 Li Zhang,1 Huaqing Meng2 1The First Branch, The First Affiliated Hospital of Chongqing Medical University, Chongqing, People’s Republic of China; 2Department of Psychiatry, The First Affiliated Hospital of Chongqing Medical University, Chongqing, People’s Republic of China Purpose: To investigate the efficacy and safety of saffron in the treatment of major depressive disorder (MDD in comparison to placebo and synthetic antidepressants. Patients and methods: We conducted a systematic search in several electronic databases as well as manual search in bibliographies of relevant studies. We included randomized controlled trials that investigated the efficacy and safety of saffron for treating MDD in adults in comparison to either placebo or synthetic antidepressants. Primary outcome was change in scores on depressive symptoms from baseline. Secondary outcomes included remission rate, response rate, and drop-out rate for all reasons. We chose a random-effects model in order to obtain more conservative results. Standardized mean differences (SMDs and odds ratios (ORs with 95% confidence intervals (CIs were estimated as the overall effect index by inverse variance models. Results: Seven studies were included in this meta-analysis. Overall quality of these included studies was moderate. As for the primary outcome, saffron showed more improvements in depression symptoms when compared with placebo, with an SMD of -1.22 (95% CI -1.94, -0.49, P=0.001. Meanwhile, saffron was as effective as synthetic antidepressants, with an SMD of 0.16 (95% CI -0.25, 0.57, P=0.44. Moderate heterogeneity existed in our analysis. Through subgroup analyses, we found that treatment dosage and duration, types of synthetic antidepressants administered in the comparison group, and outcome measures could explain most of the variance. No differences were found in remission rate, response

  10. The efficacy and safety of 10 mg vortioxetine in the treatment of major depressive disorder: a meta-analysis of randomized controlled trials

    Directory of Open Access Journals (Sweden)

    Li G

    2016-02-01

    Full Text Available Guangjian Li, Xu Wang, Dihui Ma Department of Neurology and Neuroscience Center, First Hospital of Jilin University, Changchun, People’s Republic of China Background: Vortioxetine is an investigational multimodal antidepressant. We conducted this meta-analysis to assess the efficacy and safety of 10 mg vortioxetine in the treatment of major depressive disorder (MDD. Methods: Randomized controlled trials (RCTs published in PubMed, Web of Science, Embase, and ClinicalTrials.gov were systematically reviewed to assess the treatment effects and safety profiles of patients with MDD who were treated with 10 mg vortioxetine. The outcome measures included response rate, remission rate, changes from baseline in Montgomery–Asberg Depression Rating Scale (MADRS, Hamilton Rating Scale for Depression (24-items (HAM-D24, Clinical Global Impression-Severity (CGI-S, and Clinical Global Impression-Improvement (CGI-I scores. Results were expressed with risk ratio or weighted mean difference with 95% confidence intervals. Pooled results were calculated using a fixed-effects model or a random-effects model according to the heterogeneity among included trials. Results: Six RCTs with a total of 1,801 patients met the inclusion criteria and were included in this meta-analysis. The 10 mg vortioxetine dose significantly increased the response rate and remission rate in the treatment of MDD compared with placebo. Moreover, there was a statistically significant reduction from baseline in the MADRS, HAM-D24, CGI-S, and CGI-I scores with 10 mg vortioxetine vs placebo. The incidence of treatment-emergent adverse events such as nausea, vomiting, constipation, and hyperhidrosis was higher in the 10 mg vortioxetine group than in the placebo group. Conclusion: Vortioxetine 10 mg can significantly increase the response rate and remission rate, and reduce the MADRS, HAM-D24, CGI-S, and CGI-I scores in patients with MDD with an acceptable risk of treatment-emergent adverse

  11. Decree no 90-918 of 11 october 1990 on exercising rights to information on major risks, in implementation of Section 21 of act no 87-565 of 22 july 1987 on the organisation of public safety measures, forestry protection against fires and prevention of major risks

    International Nuclear Information System (INIS)

    1990-01-01

    This Decree specifies the content and type of information to which persons likely to be exposed to major risks must have access, in accordance with the 1987 Act. These provisions apply in the communes for which a special action plan has been prepared. The information includes a description of the risks and their foreseeable consequences for persons, property and the environment, and a statement on the preventive measures to limit their effects. A summary record of this information is established [fr

  12. rTMS of the dorsomedial prefrontal cortex for major depression: safety, tolerability, effectiveness, and outcome predictors for 10 Hz versus intermittent theta-burst stimulation.

    Science.gov (United States)

    Bakker, Nathan; Shahab, Saba; Giacobbe, Peter; Blumberger, Daniel M; Daskalakis, Zafiris J; Kennedy, Sidney H; Downar, Jonathan

    2015-01-01

    Conventional rTMS protocols for major depression commonly employ stimulation sessions lasting >30 min. However, recent studies have sought to improve costs, capacities, and outcomes by employing briefer protocols such as theta burst stimulation (iTBS). To compare safety, effectiveness, and outcome predictors for DMPFC-rTMS with 10 Hz (30 min) versus iTBS (6 min) protocols, in a large, naturalistic, retrospective case series. A chart review identified 185 patients with a medication-resistant major depressive episode who underwent 20-30 sessions of DMPFC-rTMS (10 Hz, n = 98; iTBS, n = 87) at a single Canadian clinic from 2011 to 2014. Clinical characteristics of 10 Hz and iTBS patients did not differ prior to treatment, aside from significantly higher age in iTBS patients. A total 7912 runs of DMPFC-rTMS (10 Hz, 4274; iTBS, 3638) were administered, without any seizures or other serious adverse events, and no significant differences in rates of premature discontinuation between groups. Dichotomous outcomes did not differ significantly between groups (Response/remission rates: Beck Depression Inventory-II: 10 Hz, 40.6%/29.2%; iTBS, 43.0%/31.0%. 17-item Hamilton Rating Scale for Depression: 10 Hz, 50.6%/38.5%; iTBS, 48.5%/27.9%). On continuous outcomes, there was no significant difference between groups in pre-treatment or post-treatment scores, or percent improvement on either measure. Mixed-effects modeling revealed no significant group-by-time interaction on either measure. Both 10 Hz and iTBS DMPFC-rTMS appear safe and tolerable at 120% resting motor threshold. The effectiveness of 6 min iTBS and 30 min 10 Hz protocols appears comparable. Randomized trials comparing 10 Hz to iTBS may be warranted. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Nursing Unit Environment Associated with Provision of Language Services in Pediatric Hospices.

    Science.gov (United States)

    Lindley, Lisa C; Held, Mary L; Henley, Kristen M; Miller, Kathryn A; Pedziwol, Katherine E; Rumley, Laurie E

    2017-04-01

    Provision of language services in pediatric hospice enables nurses to communicate effectively with patients who have limited English proficiency. Language barriers contribute to ethnic disparities in health care. While language service use corresponds with improved patient comprehension of illness and care options, we lack an understanding of how the nurse work environment affects the provision of these services. Data were obtained from the 2007 National Home and Hospice Care Survey and included a study sample of 1251 pediatric hospice agencies. Variable selection was guided by structural contingency theory, which posits that organizational effectiveness is dependent upon how well an organization's structure relates to its context. Using multivariate logistic regression, we analyzed the extent to which nursing unit environment predicted provision of translation services and interpreter services. The majority of hospices provided translation services (74.9 %) and interpreter services (87.1 %). Four variables predicted translation services: registered nurse (RN) unit size, RN leadership, RN medical expertise, and for-profit status. RN medical expertise and having a safety climate within the hospice corresponded with provision of interpreter services. Findings indicate that nursing unit environment predicts provision of language services. Hospices with more specialized RNs and a stronger safety climate might include staffs who are dedicated to best care provision, including language services. This study provides valuable data on the nurse work environment as a predictor of language services provision, which can better serve patients with limited English proficiency and ultimately reduce ethnic disparities in end-of-life care for children and their families.

  14. Efficacy and safety of escitalopram versus citalopram in major depressive disorder: a 6-week, multicenter, randomized, double-blind, flexible-dose study.

    Science.gov (United States)

    Ou, Jian-Jun; Xun, Guang-Lei; Wu, Ren-Rong; Li, Le-Hua; Fang, Mao-Sheng; Zhang, Hong-Geng; Xie, Shi-Ping; Shi, Jian-Guo; Du, Bo; Yuan, Xue-Qin; Zhao, Jing-Ping

    2011-02-01

    S-citalopram (escitalopram) is the very active moiety of citalopram. It has been shown in many studies to be an effective and safe antidepressant for treating major depressive disorder (MDD). The aim of our study was to compare the efficacy and safety of escitalopram vs citalopram in Chinese MDD patients. In the double-blind study, 240 MDD patients were randomly assigned to treatment for 6 weeks either with escitalopram (10-20 mg/d) or citalopram (20-40 mg/d). The primary efficacy measurement was the change of 17-item Hamilton Depression Rating Scale (HAMD-17) total score from baseline to the end of study. The secondary efficacy measurements were response and remission rates. The adverse events (AEs) were recorded by the investigator. Two hundred and three (85%) patients completed the trial. The average dose was 13.9 mg/d in the escitalopram group and 27.6 mg/d in the citalopram group. No significant differences were found between the two groups in the change in HAMD-17 total score, response, and remission rate. These results were similar in severe MDD patients. No significant differences were found between the two groups in AEs. No serious AEs were observed in this study. The study suggests that escitalopram 10-20 mg/d are as effective and safe as citalopram 20-40 mg/d in the short-term treatment for Chinese MDD patients.

  15. A study on the regulatory approach of major technical issues

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Keun Sun; Oh, S. H.; Kang, H. J.; Kim, G. S. [Sunmoon Univ., Asan (Korea, Republic of); Lee, S. H.; Baek, W. P.; Yang, S. H.; Jeong, Y. H. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of)

    1999-02-15

    This project is to provide the regulatory direction of 4 major technical issues for the Korean Next Generation Reactors, which are parts of major technical issues resulted from the safety regulation R and D on the KNGR. The outstanding results are are as follows : related to the classification and acceptance criteria of plant conditions, currently used classification and safety requirement were reviewed and regulatory direction was proposed. Among multiple failures, it is identified that SBO, TLOFW, multiple SGTR and ATWS are basically to be considered for additional requirements for advanced reactors. This study reviewed risk aspects, design consideration, and trends of safety requirements, and proposed fundamental safety requirements to be applied for KNGR. Multiple steam generator tube failure is a significant safety concern because of the possibility of release of radionuclides to the environment through containment bypass. Proposed safety requirement for this event can be categorized mainly as analysis requirement, design evaluation requirement and PSA requirement; For protection of containment failure, a reasonable safety position is necessary through and integrated review of possibility of severe accident occurrence, effects of sever accident mitigation features and cost effects of these design features. With this consideration safety requirements developed are the analysis requirement, provision of protective measures and survivability/availability of protective measures.

  16. [Safety and efficacy of oral escitalopram as continuation treatment of intravenous citalopram, in patients with major depressive disorder--the navigade switch study].

    Science.gov (United States)

    Schmitt, L; Arbus, C; Tonnoir, B

    2006-01-01

    suggestive of residual symptoms of depression (anxiety, 9%; insomnia, 5% of patients). In conclusion, in this study oral escitalopram (10 mg or 20 mg) was well tolerated as continuation treatment after switching from intravenous citalopram (20 mg or 40 mg). From the efficacy and safety data of this study, it can be concluded that the switch from citalopram iv to oral escitalopram (10 and 20 mg/day) is effective in decreasing depressive symptoms, and could be safely proposed in patients with major depressive disorder.

  17. 10 CFR 1706.6 - Solicitation provisions.

    Science.gov (United States)

    2010-01-01

    ... organizational conflicts of interest certificate from any marketing consultants engaged by an offeror in support... 10 Energy 4 2010-01-01 2010-01-01 false Solicitation provisions. 1706.6 Section 1706.6 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTERESTS § 1706.6...

  18. 48 CFR 1823.7001 - NASA solicitation provisions and contract clauses.

    Science.gov (United States)

    2010-10-01

    ..., RENEWABLE ENERGY TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Safety and Health 1823.7001 NASA... official(s) responsible for matters of safety and occupational health, determines that the application of... containing the provision at 1852.223-70. This provision may be modified to identify specific information that...

  19. Development of the status of W and T for the realization of a long-term safety demonstration for the final repository using the examples VSG and Konrad. Report on the Working package 2. Review and development of safety-related assessments of disposal facilities of wastes with negligible heat generation; development and provision of the necessary set of tools using the example of the final repository Konrad

    International Nuclear Information System (INIS)

    Larue, Juergen; Fischer-Appelt, Klaus; Hartwig-Thurat, Eva

    2015-09-01

    In the research project on the ''Review and development of safety-related assessments of disposal facilities with negligible heat generation; development and provision of the necessary set of tools, using the example of the Konrad disposal facility'' (3612R03410), the state of the art in science and technology of the safety-related assessments and sets of tools for building a safety case was examined. The reports pertaining to the two work packages described the further development of the methodology for accident analyses (WP 1) and of building a safety case (WP 2); also, comparisons were drawn on a national and international scale with the methods applied in the licensing procedure of the Konrad disposal facility. A safety case as well as its underlying analyses and methods always has to be brought up to date with the development of the state of the art in science and technology. In Germany, two safety cases regarding the long-term safety of disposal facilities have been prepared. These are the licensing documentation for the Konrad disposal facility in the year 1990 and the research project regarding the preliminary safety case for the Gorleben site (Vorlaeufige Sicherheitsanalyse Gorleben - VSG) in the year 2013, both reflecting the state of development of building a safety case at the respective time. Comparing the two above-mentioned examples of safety cases and taking recent international recommendations and national regulations into account, this report on Work Package 2 presents the development of the international state of the art in science and technology. This has been done by summarising the essential differences and similarities of each element of the safety case for the Konrad disposal facility on the one hand and the VSG and the international status on the other hand.

  20. 29 CFR 1910.19 - Special provisions for air contaminants.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Special provisions for air contaminants. 1910.19 Section 1910.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Standards § 1910.19 Special provisions for air contaminants. (a) Asbestos, tremolite, anthophyllite, and...

  1. 49 CFR 805.735-15 - Miscellaneous statutory provisions.

    Science.gov (United States)

    2010-10-01

    ... TRANSPORTATION SAFETY BOARD EMPLOYEE RESPONSIBILITIES AND CONDUCT § 805.735-15 Miscellaneous statutory provisions. Each Member and employee shall acquaint himself with the statutory provisions in appendix I, attached hereto and made a part thereof, which relate to his ethical and other conduct as a Member and employee of...

  2. Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-22

    The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

  3. CERN's new safety policy

    CERN Multimedia

    2014-01-01

    The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

  4. Objective Provision Tree for K-DEMO

    International Nuclear Information System (INIS)

    Oh, Kyemin; Kang, Myung-suk; Heo, Gyunyoung; Kim, Hyoung-chan

    2014-01-01

    In current nuclear field based on technology-neutral approach, safety principles and design have been considered for Generation IV (Gen-IV) nuclear power plants in parallel. This strategy can save resource, time, and manpower while keeping achievable safety. For this reason, the studies related with safety affecting significant design parameters for planned construction or fusion plants was needed and required even though K-DEMO is staying in pre-conceptual design phase. Objective Provision Tree (OPT) is one of the tools of Integrated Safety Assessment Methodology (ISAM) developed by Risk and Safety Working Group (RSWG) for design and assessment of Gen-IV. This is suitable tool to recognize and investigate safety issues from previous engineering experience. The purpose of this paper is to suggest multiple barriers/critical safety function and to describe the current status of the OPT for the conceptual design of K-DEMO. In this paper, critical safety functions were defined and OPT for K-DEMO was described and performed. We have carried out researches related to safety for fusion power plant in collaboration with the academies funded by NFRI during the past 4 years. As part of this research, Integrated Safety Assessment Methodology (ISAM), which was used to develop GEN-IV nuclear systems, was used to determine the technical safety issues and regulatory requirements for K-DEMO. OPT is one of ISAM tools

  5. 14 CFR 1274.934 - Safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

  6. Further development of the methodology for the realization of safety analyses concerning the controllability of operational malfunctions and accidents. Report on the working package 1. Review and development of safety-related assessment for final repositories for wastes with negligible heat generation and the provision of the necessary set of tools using the example of the final repository Konrad; Weiterentwicklung der Methodik fuer die Durchfuehrung von Sicherheitsanalysen zur Beherrschung von Betriebsstoerungen und Stoerfaellen. Bericht zum Arbeitspaket 1. Untersuchung und Entwicklung von sicherheitstechnischen Bewertungen fuer Endlager fuer Abfaelle mit vernachlaessigbarer Waermeentwicklung und Bereitstellung des notwendigen Instrumentariums am Beispiel des Endlagers Konrad

    Energy Technology Data Exchange (ETDEWEB)

    Hartwig-Thurat, Eva; Uhlmann, Stephan

    2015-09-15

    In the research project on the ''Review and development of safety-related assessments of disposal facilities with negligible heat generation; development and provision of the necessary set of tools, using the example of the Konrad disposal facility'' (Untersuchung und Entwicklung von sicherheitstechnischen Bewertungen fuer Endlager fuer Abfaelle mit vernachlaessigbarer Waermeentwicklung; Entwicklung und Bereitstellung des notwendigen Instrumentariums am Beispiel des Endlagers Konrad - Forschungsvorhaben 3612R03410), the state of the art in science and technology of the safety-related assessments and sets of tools for building a safety case was examined. The reports pertaining to the two work packages described the further development of the methodology for accident analyses (WP 1) and of building a safety case (WP 2); also, comparisons were drawn on a national and international scale with the methods applied in the licensing procedure of the Konrad disposal facility. As part of the project, the report of Work Package 1 depicts the methodology of the operating safety analysis in order to control malfunctions and incidents (accident analysis) using the example of the Konrad mine accident analysis. Set of criteria in this connection is the state-of-the-art international and national comprehensive body of legislation identifying the incident requirements. In extracts complementary safety analysis procedures of other countries are presented where applicable. It becomes apparent, that the majority of the investigated countries use a deterministic accident analyses to identify incidents. Here, common international practice is to com-plement the deterministic accident analysis by a probabilistic analysis. This procedure acts on the IAEA (International Atomic Energy Agency) terms of reference using both deterministic and probabilistic methods for the determination of facility hazard potentials. Based on the Konrad mine method, aspects of incident

  7. Evaluation of food provision and nutrition support at the London 2012 Olympic Games: the opinion of sports nutrition experts.

    Science.gov (United States)

    Pelly, Fiona; Meyer, Nanna L; Pearce, Jeni; Burkhart, Sarah J; Burke, Louise M

    2014-12-01

    The aim of this study was to evaluate the food provision and nutrition support at the London 2012 Olympic (OG) and Paralympic Games (PG) from the perspective of sports nutrition experts attending the event. Participants (n = 15) were asked to complete an online survey and rate on a Likert scale menu qualities, food safety, sustainability practices, nutrition labeling, and provision for cultural needs, dietary regimes and specific situations. Open-ended responses were incorporated to explore expert opinion and areas for improvement. Participants rated their overall experience of the food provision as 7.6 out of 10 (range 5 to 10), with the majority (n = 11) rating it greater than 7. The variety, accessibility, presentation, temperature, and freshness of menu items rated as average to good. A below average rating was received for recovery food and beverages, provision of food for traveling to other venues, taking suitable snacks out of the dining hall and provision of food at other venues. However, the variety and accessibility of choices for Ramadan, and provision of post-competition food were rated highly. A number of comments were received about the lack of gluten free and lower energy/fat items. The inclusion of allergens on nutrition labeling was considered more important than nutrient content. While dietetic review of the menu in advance of the OG and PG is clearly a valuable process that has resulted in improvements in the food supply, there are still areas that need to be addressed that are currently not implemented during the event.

  8. Safety work organization in nuclear power plant. A9. Volume 2

    International Nuclear Information System (INIS)

    1985-01-01

    The second volume provides the laws, directives, major standards, principles, lists of selected workplaces where woman work is prohibited, instructions for new personnel, general principles of workplace safety, reports and provisions by commissions for reporting accidents and injuries, recourses, etc. (J.P.)

  9. 40 CFR 87.6 - Aircraft safety.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Aircraft safety. 87.6 Section 87.6... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES General Provisions § 87.6 Aircraft safety. The provisions of... met within the specified time without creating a safety hazard. ...

  10. ITER safety

    International Nuclear Information System (INIS)

    Raeder, J.; Piet, S.; Buende, R.

    1991-01-01

    As part of the series of publications by the IAEA that summarize the results of the Conceptual Design Activities for the ITER project, this document describes the ITER safety analyses. It contains an assessment of normal operation effluents, accident scenarios, plasma chamber safety, tritium system safety, magnet system safety, external loss of coolant and coolant flow problems, and a waste management assessment, while it describes the implementation of the safety approach for ITER. The document ends with a list of major conclusions, a set of topical remarks on technical safety issues, and recommendations for the Engineering Design Activities, safety considerations for siting ITER, and recommendations with regard to the safety issues for the R and D for ITER. Refs, figs and tabs

  11. 78 FR 26106 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2013-05-03

    ... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No FMCSA-2011-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice; correction. SUMMARY: The FMCSA published a document in the Federal Register of...

  12. Wheelchair service provision education in academia

    Directory of Open Access Journals (Sweden)

    Karen H. Fung

    2017-09-01

    Conclusion: The majority of the educational institutions teach wheelchair education; however, there is great variability in what and how it is taught and evaluated. The results demonstrate the need for more in-depth investigation regarding the integration process of wheelchair education in educational institutions, with the ultimate goal of improving wheelchair service provision worldwide.

  13. Major depression

    Science.gov (United States)

    Depression - major; Depression - clinical; Clinical depression; Unipolar depression; Major depressive disorder ... providers do not know the exact causes of depression. It is believed that chemical changes in the ...

  14. Safety culture

    International Nuclear Information System (INIS)

    1991-01-01

    The response to a previous publication by the International Nuclear Safety Advisory Group (INSAG), indicated a broad international interest in expansion of the concept of Safety Culture, in such a way that its effectiveness in particular cases may be judged. This report responds to that need. In its manifestation, Safety Culture has two major components: the framework determined by organizational policy and by managerial action, and the response of individuals in working within and benefiting by the framework. 1 fig

  15. Safety at CERN

    CERN Document Server

    2009-01-01

    Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

  16. Funding and provision of resources in public and private school ...

    African Journals Online (AJOL)

    The work discussed funding for libraries in selected public and private schools in Imo State as well as provision of resources in their libraries. The major aim of the work was that there is a corollary between funding and provision of resources such that the funding directly affects the resources of the library. The survey ...

  17. 14 CFR 1260.37 - Safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

  18. Categorization of Radioactive Sources. Safety Guide

    International Nuclear Information System (INIS)

    2009-01-01

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the Contracting Parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  19. Direct comparison of the efficacy and safety of oral treatments with oleylphosphocholine (OlPC and miltefosine in a mouse model of L. major cutaneous leishmaniasis.

    Directory of Open Access Journals (Sweden)

    Anny Fortin

    2014-09-01

    Full Text Available Cutaneous leishmaniasis (CL represents a range of skin diseases caused by infection with Leishmania parasites and associated with tissue inflammation and skin ulceration. CL is clinically widespread in both the Old and New World but lacks treatments that are well tolerated, effective and inexpensive. Oleylphosphocholine (OlPC is a new orally bioavailable drug of the alkylphosphocholine family with potent antileishmanial activity against a broad range of Leishmania species/strains.The potential of OlPC against Old World CL was evaluated in a mouse model of Leishmania (L. major infection in BALB/c mice. Initial dose-response experiments showed that an oral daily dose of 40 mg/kg of OlPC was needed to impact time to cure and lesion sizes. This dose was then used to directly compare the efficacy of OlPC to the efficacy of the antileishmanial drugs miltefosine (40 mg/kg/day, fluconazole (160 mg/kg/day and amphotericin B (25 mg/kg/day. OlPC, miltefosine and fluconazole were given orally for 21 days while amphotericin B was administered intraperitoneally for 10 days. Ulcer sizes and animal weights were followed up on a weekly basis and parasitemia was determined by means of a real-time in vivo imaging system which detects luminescence emitted from luciferase-expressing infecting L. major parasites. Amphotericin B and OlPC showed excellent efficacy against L. major lesions in terms of reduction of parasitic loads and by inducing complete healing of established lesions. In contrast, treatment with miltefosine did not significantly affect parasitemia and lesion sizes, while fluconazole was completely ineffective at the dose regimen tested.Given the data showing the outstanding efficacy and tolerability of OlPC, our results suggest that OlPC is a promising new drug candidate to improve and simplify current clinical management of L. major CL.

  20. Provisions of communication between NPP operational personnel: drifts of development

    International Nuclear Information System (INIS)

    Piskarev, S.A; Aksenov, V.R.

    2001-01-01

    At present Russia has a problem of new NPPs construction, which have to replace old one. The main goal here is provision of safety operation. Communication provision between operational personnel and variety of plant systems is one of the aspects of it. The aim of this paper is research of foreign experience in communication and operator support systems development, consideration of several modern projects based on these systems, definition drifts of development. (authors)

  1. The provision of therapy mattresses for pressure ulcer prevention.

    Science.gov (United States)

    Pagnamenta, Fania

    2017-03-23

    Preventing pressure ulcers is complex and involves skin care, the provision of therapy mattresses, repositioning, the management of incontinence and adequate nutritional support. This article describes a model of therapy mattress provision that is based on non-powered products. Evaluating the efficiency of this model is challenging, due to the complexities of care, but Safety Thermometer data and incidents reports offer reassurance that non-powered therapy mattresses can provide adequate pressure ulcer prevention. Therapy mattress provision is only one of the five interventions and these are described in details to give readers a fuller picture of the model used at the author's trust.

  2. Study of the safety, immunogenicity and efficacy of attenuated and killed Leishmania (Leishmania major vaccines in a rhesus monkey (Macaca mulatta model of the human disease

    Directory of Open Access Journals (Sweden)

    VF Amaral

    2002-10-01

    Full Text Available We have compared the efficacy of two Leishmania (Leishmania major vaccines, one genetically attenuated (DHFR-TS deficient organisms, the other inactivated [autoclaved promastigotes (ALM with bacillus Calmete-Guérin (BCG], in protecting rhesus macaques (Macaca mulatta against infection with virulent L. (L. major. Positive antigen-specific recall proliferative response was observed in vaccinees (79% in attenuated parasite-vaccinated monkeys, versus 75% in ALM-plus-BCG-vaccinated animals, although none of these animals exhibited either augmented in vitro gamma interferon (IFN-g production or positive delayed-type hypersensitivity (DTH response to the leishmanin skin test prior to the challenge. Following challenge, there were significant differences in blastogenic responses (p < 0.05 between attenuated-vaccinated monkeys and naïve controls. In both vaccinated groups very low levels of antibody were found before challenge, which increased after infective challenge. Protective immunity did not follow vaccination, in that monkeys exhibited skin lesion at the site of challenge in all the groups. The most striking result was the lack of pathogenicity of the attenuated parasite, which persisted in infected animals for up to three months, but were incapable of causing disease under the conditions employed. We concluded that both vaccine protocols used in this study are safe in primates, but require further improvement for vaccine application.

  3. Iron chelation with deferasirox in adult and pediatric patients with thalassemia major: efficacy and safety during 5 years' follow-up.

    Science.gov (United States)

    Cappellini, M Domenica; Bejaoui, Mohamed; Agaoglu, Leyla; Canatan, Duran; Capra, Marcello; Cohen, Alan; Drelichman, Guillermo; Economou, Marina; Fattoum, Slaheddine; Kattamis, Antonis; Kilinc, Yurdanur; Perrotta, Silverio; Piga, Antonio; Porter, John B; Griffel, Louis; Dong, Victor; Clark, Joan; Aydinok, Yesim

    2011-07-28

    Patients with β-thalassemia require lifelong iron chelation therapy from early childhood to prevent complications associated with transfusional iron overload. To evaluate long-term efficacy and safety of once-daily oral iron chelation with deferasirox, patients aged ≥ 2 years who completed a 1-year, phase 3, randomized trial entered a 4-year extension study, either continuing on deferasirox (deferasirox cohort) or switching from deferoxamine to deferasirox (crossover cohort). Of 555 patients who received ≥ 1 deferasirox dose, 66.8% completed the study; 43 patients (7.7%) discontinued because of adverse events. In patients with ≥ 4 years' deferasirox exposure who had liver biopsy, mean liver iron concentration significantly decreased by 7.8 ± 11.2 mg Fe/g dry weight (dw; n = 103; P < .001) and 3.1 ± 7.9 mg Fe/g dw (n = 68; P < .001) in the deferasirox and crossover cohorts, respectively. Median serum ferritin significantly decreased by 706 ng/mL (n = 196; P < .001) and 371 ng/mL (n = 147; P < .001), respectively, after ≥ 4 years' exposure. Investigator-assessed, drug-related adverse events, including increased blood creatinine (11.2%), abdominal pain (9.0%), and nausea (7.4%), were generally mild to moderate, transient, and reduced in frequency over time. No adverse effect was observed on pediatric growth or adolescent sexual development. This first prospective study of long-term deferasirox use in pediatric and adult patients with β-thalassemia suggests treatment for ≤ 5 years is generally well tolerated and effectively reduces iron burden. This trial was registered at www.clinicaltrials.gov as #NCT00171210.

  4. Nuclear safety in EU candidate countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-10-01

    Nuclear safety in the candidate countries to the European Union is a major issue that needs to be addressed in the framework of the enlargement process. Therefore WENRA members considered it was their duty to offer their technical assistance to their Governments and the European Union Institutions. They decided to express their collective opinion on nuclear safety in those candidate countries having at least one nuclear power plant: Bulgaria, the Czech Republic, Hungary, Lithuania, Romania, Slovakia and Slovenia. The report is structured as follows: A foreword including background information, structure of the report and the methodology used, General conclusions of WENRA members reflecting their collective opinion, For each candidate country, an executive summary, a chapter on the status of the regulatory regime and regulatory body, and a chapter on the nuclear power plant safety status. Two annexes are added to address the generic safety characteristics and safety issues for RBMK and VVER plants. The report does not cover radiation protection and decommissioning issues, while safety aspects of spent fuel and radioactive waste management are only covered as regards on-site provisions. In order to produce this report, WENRA used different means: For the chapters on the regulatory regimes and regulatory bodies, experts from WENRA did the work. For the chapters on nuclear power plant safety status, experts from WENRA and from French and German technical support organisations did the work. Taking into account the contents of these chapters, WENRA has formulated its general conclusions in this report.

  5. Nuclear safety in EU candidate countries

    International Nuclear Information System (INIS)

    2000-10-01

    Nuclear safety in the candidate countries to the European Union is a major issue that needs to be addressed in the framework of the enlargement process. Therefore WENRA members considered it was their duty to offer their technical assistance to their Governments and the European Union Institutions. They decided to express their collective opinion on nuclear safety in those candidate countries having at least one nuclear power plant: Bulgaria, the Czech Republic, Hungary, Lithuania, Romania, Slovakia and Slovenia. The report is structured as follows: A foreword including background information, structure of the report and the methodology used, General conclusions of WENRA members reflecting their collective opinion, For each candidate country, an executive summary, a chapter on the status of the regulatory regime and regulatory body, and a chapter on the nuclear power plant safety status. Two annexes are added to address the generic safety characteristics and safety issues for RBMK and VVER plants. The report does not cover radiation protection and decommissioning issues, while safety aspects of spent fuel and radioactive waste management are only covered as regards on-site provisions. In order to produce this report, WENRA used different means: For the chapters on the regulatory regimes and regulatory bodies, experts from WENRA did the work. For the chapters on nuclear power plant safety status, experts from WENRA and from French and German technical support organisations did the work. Taking into account the contents of these chapters, WENRA has formulated its general conclusions in this report

  6. Deterministic Safety Analysis for Nuclear Power Plants. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the contracting parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  7. Assessment of basic safety issues

    International Nuclear Information System (INIS)

    Queniart, D.

    1996-01-01

    Work on the French-German common safety approach for future nuclear power plants continued in 1994 to allow for more detailed discussion of some major issues, taking into account the options provided by the industry for the EPR (European Pressurized water Reactor) project, as described in the document entitled 'Conceptual Safety Features Review File'. Seven meetings of a GPR/RSK advisory experts subgroup, six GPR/RSK plenary sessions and six meetings of the safety authorities (DFD) dealt with the following topics: design of the systems and use of probabilistic approaches, application of a 'break preclusion' approach to the main primary pipings, protection against external hazards (aircraft crashes, explosions, earthquakes), provisions with respect to accidents involving core melt and to containment design, radiological consequences of reference accidents and accidents involving core melt at low pressure. The important aspects of the joint policy are recalled in the presentation. The whole set of GPR/RSK recommendations were agreed by the French and German safety authorities during the DFD meetings of 1994 and early 1995. The utilities decided to begin the basic design phase in February, 1995. Work is now continuing to develop the common French-German approach for future nuclear power plants, in the same way as before. In 1995, this mainly covers the design of the containment and of the systems, but also new issues such as the protection against secondary side overpressurization, radiological protection of workers and radioactive wastes. (J.S.). 3 figs., 1 tab

  8. Role of vitamin C as an adjuvant therapy to different iron chelators in young β-thalassemia major patients: efficacy and safety in relation to tissue iron overload.

    Science.gov (United States)

    Elalfy, Mohsen S; Saber, Maha M; Adly, Amira Abdel Moneam; Ismail, Eman A; Tarif, Mohamed; Ibrahim, Fatma; Elalfy, Omar M

    2016-03-01

    Vitamin C, as antioxidant, increases the efficacy of deferoxamine (DFO). To investigate the effects of vitamin C as an adjuvant therapy to the three used iron chelators in moderately iron-overloaded young vitamin C-deficient patients with β-thalassemia major (β-TM) in relation to tissue iron overload. This randomized prospective trial that included 180 β-TM vitamin C-deficient patients were equally divided into three groups (n = 60) and received DFO, deferiprone (DFP), and deferasirox (DFX). Patients in each group were further randomized either to receive vitamin C supplementation (100 mg daily) or not (n = 30). All patients received vitamin C (group A) or no vitamin C (group B) were followed up for 1 yr with assessment of transfusion index, hemoglobin, iron profile, liver iron concentration (LIC) and cardiac magnetic resonance imaging (MRI) T2*. Baseline vitamin C was negatively correlated with transfusion index, serum ferritin (SF), and LIC. After vitamin C therapy, transfusion index, serum iron, SF, transferrin saturation (Tsat), and LIC were significantly decreased in group A patients, while hemoglobin and cardiac MRI T2* were elevated compared with baseline levels or those in group B without vitamin C. The same improvement was found among DFO-treated patients post-vitamin C compared with baseline data. DFO-treated patients had the highest hemoglobin with the lowest iron, SF, and Tsat compared with DFP or DFX subgroups. Vitamin C as an adjuvant therapy possibly potentiates the efficacy of DFO more than DFP and DFX in reducing iron burden in the moderately iron-overloaded vitamin C-deficient patients with β-TM, with no adverse events. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Developing a strong safety culture - a safety management challenge

    International Nuclear Information System (INIS)

    Low, M.; Gipson, G. P.; Williams, M.

    1995-01-01

    The approach is presented adapted by Nuclear Electric to build a strong safety culture through the development of its safety management system. Two features regarded as critical to a strong safety culture are: provision of effective communications to promote an awareness and ownership of safety among craft, and commitment to continuous improvement with a genuine willingness to learn from own experiences and those from others. (N.T.) 5 refs., 4 figs., 1 tab

  10. Major Links.

    Science.gov (United States)

    Henderson, Tona

    1995-01-01

    Provides electronic mail addresses for resources and discussion groups related to the following academic majors: art, biology, business, chemistry, computer science, economics, health sciences, history, literature, math, music, philosophy, political science, psychology, sociology, and theater. (AEF)

  11. Major Roads

    Data.gov (United States)

    Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...

  12. 50 CFR 25.71 - Public safety.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Public safety. 25.71 Section 25.71... NATIONAL WILDLIFE REFUGE SYSTEM ADMINISTRATIVE PROVISIONS Safety Regulations § 25.71 Public safety. Persons using national wildlife refuges shall comply with the safety requirements which are established under...

  13. 21 CFR 610.11 - General safety.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false General safety. 610.11 Section 610.11 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS General Provisions § 610.11 General safety. A general safety test... for administration to humans. The general safety test is required in addition to other specific tests...

  14. Evaluation of Drought Implications on Ecosystem Services: Freshwater Provisioning and Food Provisioning in the Upper Mississippi River Basin.

    Science.gov (United States)

    Li, Ping; Omani, Nina; Chaubey, Indrajeet; Wei, Xiaomei

    2017-05-08

    Drought is one of the most widespread extreme climate events with a potential to alter freshwater availability and related ecosystem services. Given the interconnectedness between freshwater availability and many ecosystem services, including food provisioning, it is important to evaluate the drought implications on freshwater provisioning and food provisioning services. Studies about drought implications on streamflow, nutrient loads, and crop yields have been increased and these variables are all process-based model outputs that could represent ecosystem functions that contribute to the ecosystem services. However, few studies evaluate drought effects on ecosystem services such as freshwater and food provisioning and quantify these services using an index-based ecosystem service approach. In this study, the drought implications on freshwater and food provisioning services were evaluated for 14 four-digit HUC (Hydrological Unit Codes) subbasins in the Upper Mississippi River Basin (UMRB), using three drought indices: standardized precipitation index ( SPI ), standardized soil water content index ( SSWI ), and standardized streamflow index ( SSI ). The results showed that the seasonal freshwater provisioning was highly affected by the precipitation deficits and/or surpluses in summer and autumn. A greater importance of hydrological drought than meteorological drought implications on freshwater provisioning was evident for the majority of the subbasins, as evidenced by higher correlations between freshwater provisioning and SSI 12 than SPI 12. Food provisioning was substantially affected by the precipitation and soil water deficits during summer and early autumn, with relatively less effect observed in winter. A greater importance of agricultural drought effects on food provisioning was evident for most of the subbasins during crop reproductive stages. Results from this study may provide insights to help make effective land management decisions in responding to

  15. Better Science Through Safety.

    Science.gov (United States)

    Gerlovich, Jack A.; Downs, Gary E.

    Following a brief description of the major components found effective in school safety programs (safety management, education, and services) and data on school accidents in Iowa, this book addresses various aspects of safety related to science instruction, emphasizing that responsibility for safety must be shared by both teacher and students.…

  16. Nuclear safety and regulation

    International Nuclear Information System (INIS)

    Kim, Hho Jung

    2000-03-01

    This book contains 12 chapters, which are atom and radiation, nuclear reactor and kinds of nuclear power plant, safeguard actuation system and stability evaluation for rock foundation of nuclear power plant, nuclear safety and principle, safety analysis and classification of incident, probabilistic safety assessment and major incident, nuclear safety regulation, system of nuclear safety regulation, main function and subject of safety regulation in nuclear facilities, regulation of fuel cycle and a nuclear dump site, protection of radiation and, safety supervision and, safety supervision and measurement of environmental radioactivity.

  17. 20 CFR 726.204 - Statutory policy provisions.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Statutory policy provisions. 726.204 Section 726.204 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, AS AMENDED BLACK LUNG BENEFITS; REQUIREMENTS FOR COAL MINE OPERATOR'S...

  18. 76 FR 56868 - Pilot Project on NAFTA Trucking Provisions

    Science.gov (United States)

    2011-09-14

    ...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to test and...

  19. 77 FR 12356 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2012-02-29

    ...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that applied to participate in the Agency's long-haul pilot program to test and demonstrate the ability... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

  20. 78 FR 25525 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2013-05-01

    ...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration..., which applied to participate in the Agency's long-haul pilot program to test and demonstrate the ability... long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled motor carriers...

  1. 77 FR 40938 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2012-07-11

    ...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... Morales Guevara (DBA Fletes Morales) which applied to participate in the Agency's long-haul pilot program...] its intent to proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot...

  2. 77 FR 27837 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2012-05-11

    ...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... carriers that applied to participate in the Agency's long- haul pilot program to test and demonstrate the... intent to proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to...

  3. 78 FR 24293 - Pilot Program on NAFTA Trucking Provisions

    Science.gov (United States)

    2013-04-24

    ...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... in the Agency's long-haul pilot program to test and demonstrate the ability of Mexico- domiciled... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

  4. 76 FR 56272 - Pilot Project on NAFTA Trucking Provisions

    Science.gov (United States)

    2011-09-12

    ...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

  5. 76 FR 73765 - Pilot Project on NAFTA Trucking Provisions

    Science.gov (United States)

    2011-11-29

    ...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to test and...

  6. Traditional Versus Birth Attendants in Provision of Maternity Care ...

    African Journals Online (AJOL)

    AJRH Managing Editor

    delivering babies by herself or working with other ... failed to show any association between the training ... provision of social safety nets in terms of cost ... methods. Examples of such novel use of TBAs are beginning to emerge in many parts of ...

  7. Autonomous intelligent cruise control (AICC) - a major contribution to the enhancement of comfort and active driving safety; Autonome Intelligente Geschwindigkeitsregelung (AICC) - ein Beitrag zur Steigerung des Komforts und der aktiven Fahrsicherheit

    Energy Technology Data Exchange (ETDEWEB)

    Dorissen, H.T.; Hoever, N.

    1996-07-01

    Within the framework of the PROMETHEUS-Project research and development work on different systems has been carried out to improve traffic efficiency, environment and safety. The Autonomous Intelligent Cruise Control has emerged as one of the projects with the brightest future. In contrast to conventional cruise control systems, the AICC system controls not only the speed of the vehicle, but also its distance to vehicles ahead. In practice this means that the driver is additionally supported by the automatic variation of the set vehicle speed according to traffic conditions. This results in a major improvement in driving comfort as well as in traffic safety. In this article, Hella describes the principal technical facts and also highlights the advantages and possible applications of the first generation of AICC. (orig.) [Deutsch] Im Rahmen des PROMETHEUS-Projektes sind unterschiedliche Systeme erforscht und entwickelt worden, um den Verkehr sicherer, umweltfreundlicher und effizienter zu gestalten. Der `Autonome Intelligente Geschwindigkeitsregler` ist hieraus als eines der zukunftstraechtigsten Projekte hervorgegangen. Ein AICC-System regelt die Geschwindigkeit sowie den Abstand zu einem vorausfahrenden Fahrzeug. Im Vergleich zum konventionellen Geschwindigkeitsregler wird der Fahrer zusaetzlich durch die automatische Anpassung der Sollgeschwindigkeit an die gegebene Verkehrssituation unterstuetzt. Dies ermoeglicht eine entsprechende Verbesserung des Fahrkomforts und letztendlich auch der Verkehrssicherheit. In diesem Beitrag zeigt Hella neben den grundsaetzlichen technischen Zusammenhaengen eine moegliche Realisierung, die Vorteile und den Nutzen fuer ein AICC-System der ersten Generation auf. (orig.)

  8. Hybrid resource provisioning for clouds

    International Nuclear Information System (INIS)

    Rahman, Mahfuzur; Graham, Peter

    2012-01-01

    Flexible resource provisioning, the assignment of virtual machines (VMs) to physical machine, is a key requirement for cloud computing. To achieve 'provisioning elasticity', the cloud needs to manage its available resources on demand. A-priori, static, VM provisioning introduces no runtime overhead but fails to deal with unanticipated changes in resource demands. Dynamic provisioning addresses this problem but introduces runtime overhead. To reduce VM management overhead so more useful work can be done and to also avoid sub-optimal provisioning we propose a hybrid approach that combines static and dynamic provisioning. The idea is to adapt a good initial static placement of VMs in response to evolving load characteristics, using live migration, as long as the overhead of doing so is low and the effectiveness is high. When this is no longer so, we trigger a revised static placement. (Thus, we are essentially applying local multi-objective optimization to tune a global optimization with reduced overhead.) This approach requires a complicated migration decision algorithm based on current and predicted:future workloads, power consumptions and memory usage in the host machines as well as network burst characteristics for the various possible VM multiplexings (combinations of VMs on a host). A further challenge is to identify those characteristics of the dynamic provisioning that should trigger static re-provisioning.

  9. Safety culture and quality management

    International Nuclear Information System (INIS)

    Edmondson, B.

    1992-01-01

    The concept of Safety Culture is defined along with its general attributes. The characteristics of a satisfactory level of Safety Culture, as it applies to an operating organisation are then presented in two ways, descriptive and as sets of questions against which an organisation's provision may be judged. (author) 1 fig

  10. Impacto da Crise do Subprime na Provisão do Risco de Crédito dos Maiores Bancos NacionaisImpact of the Subprime Crisis in the Provision of Credit Risk of Major National BanksImpacto de la Crisis del Subprime en la Provisión para el Riesgo de Crédito de los Mayores Bancos Nacionales

    Directory of Open Access Journals (Sweden)

    TOLEDO FILHO, Jorge Ribeiro de

    2009-09-01

    Full Text Available RESUMOAs instituições financeiras estão diretamente expostas ao risco de crédito, que é o risco de o tomador não cumprir com suas obrigações, ou seja, com o pagamento das dívidas nos seus prazos estabelecidos. Para tanto, os bancos fazem as provisões para este tipo de risco, que constam de seus balanços. Em 2006/2007 houve o impacto de uma nova crise financeira que se espalhou pelo mundo, conhecida como a crise do subprime. O objetivo deste estudo é analisar se as provisões para risco de crédito aumentaram após o início da crise do subprime nos dez maiores bancos nacionais, selecionados de acordo com os seus ativos totais. Para responder a essa questão, foram analisados os balanços patrimoniais de cada um desses bancos no período de 2005 a 2007. Esta pesquisa se caracteriza, quanto aos objetivos, como descritiva e, quanto aos procedimentos, como documental. Quanto à abordagem, caracteriza-se como qualitativa. Os resultados apontam que a crise do subprime gerou pouco impacto na provisão dos riscos de crédito das instituições analisadas. Identificou-se um ligeiro aumento nos índices de provisão no auge da crise em 2006. Em 2007 esses percentuais diminuíram, provavelmente devido à estabilidade econômica do país e da estagnação da crise do subprime naquele ano, pelo menos em seu reflexo no Brasil.ABSTRACTFinancial institutions are directly exposed to the credit risk, that is, the risk of the borrower not fulfill with their obligations, paying their debts in its stated periods established previously. The banks predict this type of risk, including them in their balance-sheets. In 2006/2007 there was the impact of a new financial crisis that spread around the world, known as the crisis of subprime. The objective of this study is to analyze if the provisions for credit risk or liquidation increased the sprouting of the crisis of subprime in ten major national banks, chosen accordant to their total assets. To answer this

  11. A prospective, randomised, controlled, double-blind phase I-II clinical trial on the safety of A-Part® Gel as adhesion prophylaxis after major abdominal surgery versus non-treated group

    Directory of Open Access Journals (Sweden)

    Weis Christine

    2010-07-01

    Full Text Available Abstract Background Postoperative adhesions occur when fibrous strands of internal scar tissue bind anatomical structures to one another. The most common cause of intra-abdominal adhesions is previous intra-abdominal surgical intervention. Up to 74% of intestinal obstructions are caused by post surgical adhesions. Although a variety of methods and agents have been investigated to prevent post surgical adhesions, the problem of peritoneal adhesions remains largely unsolved. Materials serving as an adhesion barrier are much needed. Methods/Design This is a prospective, randomised, controlled, patient blinded and observer blinded, single centre phase I-II trial, which evaluates the safety of A-Part® Gel as an adhesion prophylaxis after major abdominal wall surgery, in comparison to an untreated control group. 60 patients undergoing an elective median laparotomy without prior abdominal surgery are randomly allocated into two groups of a 1:1- ratio. Safety parameter and primary endpoint of the study is the occurrence of wound healing impairment or peritonitis within 28 (+10 days after surgery. The frequency of anastomotic leakage within 28 days after operation, occurrence of adverse and serious adverse events during hospital stay up to 3 months and the rate of adhesions along the scar within 3 months are defined as secondary endpoints. After hospital discharge the investigator will examine the enrolled patients at 28 (+10 days and 3 months (±14 days after surgery. Discussion This trial aims to assess, whether the intra-peritoneal application of A-Part® Gel is safe and efficacious in the prevention of post-surgical adhesions after median laparotomy, in comparison to untreated controls. Trial registration NCT00646412

  12. Major hazards onshore and offshore

    International Nuclear Information System (INIS)

    1992-01-01

    This symposium continues the tradition of bringing together papers on a topic of current interest and importance in terms of process safety - in this case, Major Hazards Onshore and Offshore. Lord Cullen in his report on the Piper Alpha disaster has, in effect, suggested that the experience gained in the control of major hazards onshore during the 1980s should be applied to improve safety offshore during the 1990s. This major three-day symposium reviews what has been learned so far with regard to major hazards and considers its present and future applications both onshore and offshore. The topics covered in the programme are wide ranging and deal with all aspects of legislation, the application of regulations, techniques for evaluating hazards and prescribing safety measures in design, construction and operation, the importance of the human factors, and recent technical developments in protective measures, relief venting and predicting the consequences of fires and explosions. (author)

  13. 50 CFR 71.12 - General provisions.

    Science.gov (United States)

    2010-10-01

    ....12 General provisions. The following provisions shall apply to public sport fishing on a national... fish hatchery area. (e) Each person shall comply with the provisions of any special notices governing...

  14. Safety of Research Reactors. Specific Safety Requirements (French Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    This Safety Requirements publication establishes requirements for all main areas of safety for research reactors, with particular emphasis on requirements for design and operation. It explains the safety objectives and concepts that form the basis for safety and safety assessment for all stages in the lifetime of a research reactor. Technical and administrative requirements for the safety of new research reactors are established in accordance with these objectives and concepts, and they are to be applied to the extent practicable for existing research reactors. The safety requirements established in this publication for the management of safety and regulatory supervision apply to site evaluation, design, manufacturing, construction, commissioning, operation (including utilization and modification), and planning for decommissioning of research reactors (including critical assemblies and subcritical assemblies). The publication is intended for use by regulatory bodies and other organizations with responsibilities in these areas and in safety analysis, verification and review, and the provision of technical support.

  15. Operational safety

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The PNL Safety, Standards and Compliance Program contributed to the development and issuance of safety policies, standards, and criteria; for projects in the nuclear and nonnuclear areas. During 1976 the major emphasis was on developing criteria, instruments and methods to assure that radiation exposure to occupational personnel and to people in the environs of nuclear-related facilities is maintained at the lowest level technically and economically practicable. Progress in 1976 is reported on the preparation of guidelines for radiation exposure; Pu dosimetry studies; the preparation of an environmental monitoring handbook; and emergency instrumentation preparedness

  16. 46 CFR 197.326 - Oxygen safety.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Oxygen safety. 197.326 Section 197.326 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.326 Oxygen safety. (a) Equipment used with...

  17. 20 CFR 638.803 - Safety.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Safety. 638.803 Section 638.803 Employees... THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... shall be assigned to such jobs or training in accordance with appropriate health and safety practices...

  18. 47 CFR 95.1125 - RF safety.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 95.1125 Section 95.1125 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1125 RF safety. Portable devices...

  19. 14 CFR 34.6 - Aircraft safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Aircraft safety. 34.6 Section 34.6... safety. (a) The provisions of this part will be revised if at any time the Administrator determines that an emission standard cannot be met within the specified time without creating a safety hazard. (b...

  20. 7 CFR 1724.55 - Dam safety.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Dam safety. 1724.55 Section 1724.55 Agriculture... § 1724.55 Dam safety. (a) The provisions of this section apply only to RUS financed electric system... for Dam Safety,”(Guidelines), as applicable. A dam, as more fully defined in the Guidelines, is...

  1. Dukovany nuclear power plant safety

    International Nuclear Information System (INIS)

    1999-01-01

    Presentation covers recommended safety issues for the Dukovany NPP which have been solved with satisfactory conclusions. Safety issues concerned include: radiation safety; nuclear safety; security; emergency preparedness; health protection at work; fire protection; environmental protection; chemical safety; technical safety. Quality assurance programs at all stages on NPP life time is described. Report includes description of NPP staff training provision, training simulator, emergency operating procedures, emergency preparedness, Year 2000 problem, inspections and life time management. Description of Dukovany Plant Safety Analysis Projects including integrity of the equipment, modernisation, equipment innovation and safety upgrading program show that this approach corresponds to the actual practice applied in EU countries, and fulfilment of current IAEA requirements for safety enhancement of the WWER 440/213 units in the course of MORAWA Equipment Upgrading program

  2. The drone as an additional risk factor due to conditions not provided for in radiological safety at major events; O drone como fator adicional de risco decorrente de condicoes nao previstas na seguranca radiologica em grandes eventos

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Gilberto de Jesus

    2015-07-01

    Major international events are potential targets of terrorist actions, seeking instant publicity that events of this magnitude provide, with the intention of causing terror and disseminate its power to a large number of people worldwide. In this context, the critical analysis of additional risk factor linked to procedures and protocols adopted on radiation safety is important. The possibility of unforeseen situations of risk, especially those resulting from the current global technological development, is a fact. Radioactive material can be used in this type of terrorism in a wide range of devices and illicit trafficking of this material is a reality that worries the International Atomic Energy Agency. In the current technological development scenario of the world, the potential occurrence of terrorist acts using drones combined with radioactive material dispersal devices, is real. The recent history of drones incidents presents cases where, despite not having been necessarily terrorist motivation, their circumstances and characteristics favor the occurrence of malicious acts. This paper proposes to alert the need of updating the current security protocols, considering the potential association of this technology with radioactive dispersal devices. (author)

  3. Playground Safety

    Science.gov (United States)

    ... Prevention Fall Prevention Playground Safety Poisoning Prevention Road Traffic Safety Sports Safety Get Email Updates To receive ... at the Consumer Product Safety Commission’s Playground Safety website . References U.S. Consumer Product Safety Commission. Injuries and ...

  4. Official News relating to CERN Safety Rules

    CERN Multimedia

    HSE Unit

    2015-01-01

    The CERN Safety Rules listed below have been published on the official CERN Safety Rules website (see here).   Safety Regulation SR-WS Works and services: this SR-WS (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”. General Safety Instruction GSI-WS-1 Safety coordination for works and services: this GSI-WS-1 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS39 “Notice of Start of Works (AOC)” and of Safety Instruction IS50 “Safety Coordination on CERN Worksites” ​Specific Safety Instruction SSI-WS-1-1 Safety coordinator for category 1 operations: this SSI-WS-1-4 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”.​ ​ In order to limit the impact on the end-of-year technical st...

  5. Cost of provision of opioid substitution therapy provision in Tijuana, Mexico.

    Science.gov (United States)

    Burgos, Jose Luis; Cepeda, Javier A; Kahn, James G; Mittal, Maria Luisa; Meza, Emilio; Lazos, Raúl Rafael Palacios; Vargas, Psyché Calderón; Vickerman, Peter; Strathdee, Steffanie A; Martin, Natasha K

    2018-05-23

    Mexico recently enacted drug policy reform to decriminalize possession of small amounts of illicit drugs and mandated that police refer identified substance users to drug treatment. However, the economic implications of drug treatment expansion are uncertain. We estimated the costs of opioid substitution therapy (OST) provision in Tijuana, Mexico, where opioid use and HIV are major public health concerns. We adopted an economic health care provider perspective and applied an ingredients-based micro-costing approach to quantify the average monthly cost of OST (methadone maintenance) provision at two providers (one private and one public) in Tijuana, Mexico. Costs were divided by type of input (capital, recurrent personnel and non-personnel). We defined "delivery cost" as all costs except for the methadone and compared total cost by type of methadone (powdered form or capsule). Cost data were obtained from interviews with senior staff and review of expenditure reports. Service provision data were obtained from activity logs and senior staff interviews. Outcomes were cost per OST contact and cost per person month of OST. We additionally collected information on patient charges for OST provision from published rates. The total cost per OST contact at the private and public sites was $3.12 and $5.90, respectively, corresponding to $95 and $179 per person month of OST. The costs of methadone delivery per OST contact were similar at both sites ($2.78 private and $3.46 public). However, cost of the methadone itself varied substantially ($0.34 per 80 mg dose [powder] at the private site and $2.44 per dose [capsule] at the public site). Patients were charged $1.93-$2.66 per methadone dose. The cost of OST provision in Mexico is consistent with other upper-middle income settings. However, evidenced-based (OST) drug treatment facilities in Mexico are still unaffordable to most people who inject drugs.

  6. 75 FR 77798 - Interpretation of OSHA's Provisions for Feasible Administrative or Engineering Controls of...

    Science.gov (United States)

    2010-12-14

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0032] 29 CFR Parts 1910 and 1926 Interpretation of OSHA's Provisions for Feasible Administrative or Engineering Controls of Occupational Noise AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION...

  7. Provisions of communication between NPP operational personnel: drifts of development

    International Nuclear Information System (INIS)

    Piskarev, S.; Aksenov, V.R.

    2000-01-01

    Approaches to the creation of control room systems (CRS) in foreign countries are based on support of operator actions. The basis is the provision of compressed information about safety and technological processes with performance on screens of monitors and by paying special attention to human factors. In contrast to the traditional, the . advantage of such boards consists in granting to the operator a flexible format with the integrated information, with graphic, generalized, etc., representation of the data. When organizing information concerning the: operative personnel, the following principles are fixed: (a) Hierarchical performance of the information about NPP technological process and safety. (b) Provision of fast access to a required format or automatic performance of 8 required format in emergencies. (c) Hierarchical organization of the signal system; a uniform format of display organization. (d) Information support of the operative personnel at normal operation and in accident conditions. (authors)

  8. Models of Public Service Provision

    DEFF Research Database (Denmark)

    Andersen, Lotte Bøgh; Kristensen, Nicolai; Pedersen, Lene Holm

    2013-01-01

    This article extends the framework of Le Grand (2003, 2010) to encompass responsiveness, and the main argument is that the combination of employee motivation, user capacity, and models of public service provision potentially has serious implications for responsiveness across service areas. Although...... research on employee motivation thrives, especially in the public service motivation (PSM) literature, few studies have investigated user capacity empirically, and we know little about the combination of PSM, user capacity and models of service provision. Analyzing four central service areas (day care......, schools, hospitals, and universities), we find variations in both user capacity and PSM. Taking this variation as a point of departure we discuss what implications different combinations of employee motivation, user capacity, and models of public service provision may have for responsiveness....

  9. Radiation safety and protection on the nuclear power plants

    International Nuclear Information System (INIS)

    Nosovskij, A.V.; Bogorad, V.I.; Vasil'chenko, V.N.; Klyuchnikov, A.A.; Litvinskaya, T.V.; Slepchenko, A.Yu.

    2008-01-01

    The main issues of the radiation safety and protection provision on the nuclear power plants are considered in this monograph. The description of the basic sources of the radiation danger on NPPs, the principles, the methods and the means of the safety and radiation monitoring provision are shown. The special attention is paid to the issues of the ionizing radiation regulation

  10. An international nuclear safety regime

    International Nuclear Information System (INIS)

    Rosen, M.

    1995-01-01

    For all the parties involved with safe use of nuclear energy, the opening for signature of the 'Convention on Nuclear Safety' (signed by 60 countries) and the ongoing work to prepare a 'Convention on Radioactive Waste Safety' are particularly important milestones. 'Convention on Nuclear Safety' is the first legal instrument that directly addresses the safety of nuclear power plants worldwide. The two conventions are only one facet of international cooperation to enhance safety. A review of some cooperative efforts of the past decades, and some key provisions of the new safety conventions, presented in this paper, show how international cooperation is increasing nuclear safety worldwide. The safety philosophy and practices involved with legal framework for the safe use of nuclear power will foster a collective international involvement and commitment. It will be a positive step towards increasing public confidence in nuclear power

  11. Dynamic provisioning for community services

    CERN Document Server

    Qi, Li

    2013-01-01

    Dynamic Provisioning for Community Services outlines a dynamic provisioning and maintenance mechanism in a running distributed system, e.g. the grid, which can be used to maximize the utilization of computing resources and user demands. The book includes a complete and reliable maintenance system solution for the large-scale distributed system and an interoperation mechanism for the grid middleware deployed in the United States, Europe, and China. The experiments and evaluations have all been practically implemented for ChinaGrid, and the best practices established can help readers to construc

  12. Optimal Provision of Public Goods

    DEFF Research Database (Denmark)

    Kreiner, Claus Thustrup; Verdelin, Nicolaj

    2009-01-01

    There currently exist two competing approaches in the literature on the optimal provision of public goods. The standard approach highlights the importance of distortionary taxation and distributional concerns. The new approach neutralizes distributional concerns by adjusting the non-linear income...... for the optimal level of a public good without imposing strong assumptions on preferences. This formula shows that distortionary taxation may have a role to play as in the standard approach. However, the main determinants of optimal provision are completely different and the traditional formula with its emphasis...

  13. Car safety seat usage and selection among families attending University Hospital Limerick

    LENUS (Irish Health Repository)

    Scully, P

    2016-05-01

    The safest way for children to travel within a car is by provision of a weight-appropriate safety-seat. To investigate this, we conducted a cross-sectional study of adult parents who had children under 12 years, and collected information related to: car use, safety-seat legislation, and type of safety-seat employed. Data were reviewed on 120 children from 60 respondents. Ninety-eight (81.7%) children were transported daily by car. Forty-eight (81.4%) respondents were aware that current safety-seat legislation is based on the weight of the child. One hundred and seven (89.9%) children were restrained during travel using a car safety-seat. One hundred and two (96.2%) safety seats were newly purchased, installed in 82.3% (88) cases by family members with installation instructions fully read in 58 (55.2%) cases. Ninety-nine (83.2%) children were restrained using an appropriate safety-seat for their weight. The results show that four out of five families are employing the most appropriate safety-seat for their child, so providing an effective mechanism to reduce car-related injury. However, the majority of safety-seats are installed by family members, which may have child safety consequences.

  14. Safety design of SNR-300

    International Nuclear Information System (INIS)

    Traube, K.

    1976-01-01

    The joint German-Belgian-Dutch loop-type 300 MW(e) LMFBR prototype is being constructed at Kalkar on the lower Rhine in Germany. Among the many arguments put forward in defense of SNR-300, that of acquiring licensing exprience has proven to be of major importance to the international breeder scene. The severity of the licensing procedures and of the safety standards imposed are unique in several respects, including timing: generally growing scepticism towards nuclear power increased severity of the licensing practice; organizational features: the procedure and criteria developed for commercial light water reactors have been applied without exemptions. This relates to the commercial-type contract under which SNR-300 is being built for private utilities by a private company; and German nuclear safety standards, known worldwide to be most stringent. The following three important areas are discussed in which SNR-300 decidedly deviates from its forerunners: protection against the hypothetical core disruptive accident (HCDA), protection against external events, and provisions for in-service inspection

  15. Curriculum Provisions for Children with Special Educational Needs ...

    African Journals Online (AJOL)

    The study sought to examine curriculum provisions for children with special educational needs in mainstream schools in Bulawayo Metropolitan. Data were collected using the Likert scale questionnaire design. A total of ten teachers and ten school heads participated in the study. Major findings show that teachers in the ...

  16. Post Fukushima safety enhancements in Indian PHWRS

    International Nuclear Information System (INIS)

    Ramasomayajulu, M.; Khot, Pankaj; Chauhan, Ashok

    2016-01-01

    Fukushima event was reviewed in Nuclear Power Corporation of India (NPCIL) and based on these reviews, safety enhancements were identified for Indian PHWRs. Safety enhancements such as additional emergency power sources, enhanced onsite water inventories, external water injection arrangements (Hook up points), measures related to hydrogen management, containment venting provision, seismic trip, mobile pumps, onsite emergency support Centre. These safety enhancements were reviewed by the regulatory body (Atomic Energy Regulatory Board, AERB) and were approved for implementation. Most of these are either implemented or in the advance stage of implementation. The paper elaborates above safety enhancements implemented post Fukushima accident; and preparedness to use these provisions. (author)

  17. Practical Child Safety Education in England: A National Survey of the Child Safety Education Coalition

    Science.gov (United States)

    Mulvaney, Caroline A.; Watson, Michael C.; Walsh, Patrick

    2013-01-01

    Objective: To examine the provision of practical safety education by Child Safety Education Coalition (CSEC) organizations in England. Design: A postal survey. Setting: Providers of child practical safety education who were also part of CSEC. Methods: In February 2010 all CSEC organizations were sent a self-completion postal questionnaire which…

  18. 75 FR 15777 - Common Crop Insurance Regulations, Basic Provisions; and Various Crop Insurance Provisions

    Science.gov (United States)

    2010-03-30

    ... (protection for production losses only) within one Basic Provisions and the applicable Crop Provisions to..., Macadamia Nut Crop Insurance Provisions, Onion Crop Insurance Provisions, Dry Pea Crop Insurance Provisions... (protection for production losses only) and revenue protection (protection against loss of revenue caused by...

  19. Safety study application guide

    International Nuclear Information System (INIS)

    1993-07-01

    Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Included are analyses of existing facilities done under the aegis of the Safety Analysis Report Upgrade Program, and analyses of new and modified facilities. A graded approach is used wherein the level of analysis and documentation for each facility is commensurate with the magnitude of the hazard(s), the complexity of the facility and the stage of the facility life cycle. Safety analysis reports (SARs) for hazard Category 1 and 2 facilities are usually detailed and extensive because these categories are associated with public health and safety risk. SARs for Category 3 are normally much less extensive because the risk to public health and safety is slight. At Energy Systems, safety studies are the name given to SARs for Category 3 (formerly open-quotes lowclose quotes) facilities. Safety studies are the appropriate instrument when on-site risks are limited to irreversible consequences to a few people, and off-site consequences are limited to reversible consequences to a few people. This application guide provides detailed instructions for performing safety studies that meet the requirements of DOE Orders 5480.22, open-quotes Technical Safety Requirements,close quotes and 5480.23, open-quotes Nuclear Safety Analysis Reports.close quotes A seven-chapter format has been adopted for safety studies. This format allows for discussion of all the items required by DOE Order 5480.23 and for the discussions to be readily traceable to the listing in the order. The chapter titles are: (1) Introduction and Summary, (2) Site, (3) Facility Description, (4) Safety Basis, (5) Hazardous Material Management, (6) Management, Organization, and Institutional Safety Provisions, and (7) Accident Analysis

  20. Bereavement Care Provision in Europe

    DEFF Research Database (Denmark)

    Guldin, Mai-Britt; Murphy, Irene; Keegan, Orla

    2015-01-01

    The Bereavement Care Taskforce of the EAPC has conducted a survey on bereavement care service provision in Europe. Mai-Britt Guldin, Irene Murphy, Orla Keegan, Barbara Monroe, Maria Antonia Lacasta Reverte and Inger Benkel report on the results. One of the key findings is that not all palliative...

  1. SGHWR safety design and evaluation

    International Nuclear Information System (INIS)

    Smith, D.R.; Merrett, D.J.; Ward, D.A.

    1977-01-01

    The paper discusses the characteristic features of the S.G.H.W.R. and identifies the single channel concept as of considerable importance. The unique feature of the design is the provision of individual spray cooling E.C.C.S. to each channel. This spray cooling occupies a prominent position in the main line safety arguments. The reliance on this form of spray cooling leads to provision of a comprehensive E.C.C.S. system of high reliability. Duplicate systems with diverse power and water sources cover the complete pressure range to give very high confidence that spray cooling is available in all major L.O.C.A.s. On the other hand hydraulic analysis of the blowdown phase demonstrates that significant convective flow is available as an alternative/supplementary cooling regime for most faults. The reactor shutdown mechanisms have also been duplicated and will be designed to high reliabilities to give surety of reactor trip in all credible faults. The comparative performance of the two systems is considered. Extent of diversity and redundancy in trip parameters is also discussed. A feature of channel concept is that the pipe sizes can be made relatively small thus restricting rates of blowdown, and the paper discusses effects of this upon long term cooling and flooding arguments. The quantities of pipework in the primary circuit introduce considerations of integrity and the paper goes on to list the measures introduced to improve segregation and protection of individual sections of the plant so that the extent of possible L.O.C.A.s is minimised. The achievement of high standards of reliability by use of in-service inspection is covered, with particular reference to the steam drums. The impact of these inspection requirements upon the very low man-rem exposures required by U.K. utilities is also included. Finally, it is noted that the provision of containment in common with other L.W.R. practice also provides a valuable engineered safety feature. The principles of

  2. Space station pressurized laboratory safety guidelines

    Science.gov (United States)

    Mcgonigal, Les

    1990-01-01

    Before technical safety guidelines and requirements are established, a common understanding of their origin and importance must be shared between Space Station Program Management, the User Community, and the Safety organizations involved. Safety guidelines and requirements are driven by the nature of the experiments, and the degree of crew interaction. Hazard identification; development of technical safety requirements; operating procedures and constraints; provision of training and education; conduct of reviews and evaluations; and emergency preplanning are briefly discussed.

  3. INPP safety upgrade programme. Accomplishments and progress

    International Nuclear Information System (INIS)

    Vaisnys, P.

    1996-01-01

    The safety upgrade programme consists of the following parts: Post Chernobyl immediate modifications undertaken to remove obvious deficiencies discovered in the course of analysis of the main causes of Chernobyl accident; Modifications to remove gaps in safety provision discovered as a result of safety assessment investigations; Modifications to remove evident discrepancies in respect to internationally accepted standard. As it follows from above the deep safety investigations were undertaken to put their findings into concrete improvement programme

  4. Radiological safety related provisions and instrumentation in Indian PHWRs

    International Nuclear Information System (INIS)

    Ramamirtham, B.; Dabhadkar, S.B.; Sah, B.M.L.

    1994-01-01

    The collective radiation doses at the nuclear power plants (NPPs) world-wide have shown a significant downward trend which has resulted due to on-going efforts to keep exposures ALARA and also to meet the recently revised individual exposure limits of ICRP. In keeping with this trend a number of additional designed dose reduction features are also being incorporated in the Indian NPPs. These include better separation and shielding of radioactive systems/equipment, elimination of the use of cobalt-free materials in active systems, improved leak tightness of systems carrying heavy water, augmented ventilation and atmosphere drying systems, etc. The build-up of radiation levels in primary heat transport (PHT) system is controlled by incorporating improvements in the fuel performance and periodic system decontamination. Plant layouts have been modified, to improve the contamination control arrangements and optimum utilisation of dosimetry devices. For better control of internal exposures continuous efforts are on to make the protective gear more user-friendly. Green belts are being established around the NPPs to provide further protection against environmental impact. A number of additional radiation monitoring instruments /systems have been incorporated to provide information on radiation/activity levels, both within the plant and outside areas, particularly during emergency conditions. For processing of data provided by the large numbers of installed radiation instruments and initiating corrective/alarm actions, a computerised system (RADAS) has been provided. (author). 7 refs., 2 tabs

  5. Import substitution and food safety provision in EU countries

    Directory of Open Access Journals (Sweden)

    Valeriya A. Aleshina

    2015-12-01

    Full Text Available Objective to describe methods of forming the mechanism of agriculturalindustrial complex protection and smoothing the social threats caused by the reduced stability in the food market and the population solvency due to the global crisis. Methods in this work we have applied statistical analytical economicmathematical methods including those based on the analysis of statistical indicators of agriculturalindustrial complex AIC. Results basing on analytical data and expert estimates the technique of risk assessment is grounded which is related to food security and reduced solvency and the situational behavior of the state is described in the context of the food crisis depending on the depth of the crisis and market instability sources. Scientific novelty economicmathematical methods were applied for risk assessment in the sphere of providing the population with food products budget expenditures on agriculture support and social protection are compared among the EU countries the methodology is proposed to coordinate efforts to stabilize the situation in the food market. Practical significance the methodology of analysis of state bodies and business communitiesrsquo efficiency in the area of food security and developing unified policies to promote agriculturalindustrial complex and social protection and recommendations in the sphere of pricing in the AIC products market for the protection of domestic market and entering the foreign commodity markets. nbsp

  6. Safety reassessment and life extension

    International Nuclear Information System (INIS)

    Gouffon, A.

    1992-12-01

    The safety reassessment policy implemented in France is a means of ensuring that no important point has been overlooked in the continuous safety reassessment process constituted by the integration of operating feedback. It also provides an opportunity for reappraisal of the basic design of a plant and examination of discrepancies between the safety options prevailing when it was built and those currently adopted. After a ten-year operating period, safety reassessment should enable identification of aging effects on structures and equipment, leading to improvement of component servicing and surveillance programs and provision for replacements which could be necessary

  7. Challenges for tree officers to enhance the provision of regulating ecosystem services from urban forests.

    Science.gov (United States)

    Davies, Helen J; Doick, Kieron J; Hudson, Malcolm D; Schreckenberg, Kate

    2017-07-01

    Urbanisation and a changing climate are leading to more frequent and severe flood, heat and air pollution episodes in Britain's cities. Interest in nature-based solutions to these urban problems is growing, with urban forests potentially able to provide a range of regulating ecosystem services such as stormwater attenuation, heat amelioration and air purification. The extent to which these benefits are realized is largely dependent on urban forest management objectives, the availability of funding, and the understanding of ecosystem service concepts within local governments, the primary delivery agents of urban forests. This study aims to establish the extent to which British local authorities actively manage their urban forests for regulating ecosystem services, and identify which resources local authorities most need in order to enhance provision of ecosystem services by Britain's urban forests. Interviews were carried out with staff responsible for tree management decisions in fifteen major local authorities from across Britain, selected on the basis of their urban nature and high population density. Local authorities have a reactive approach to urban forest management, driven by human health and safety concerns and complaints about tree disservices. There is relatively little focus on ensuring provision of regulating ecosystem services, despite awareness by tree officers of the key role that urban forests can play in alleviating chronic air pollution, flood risk and urban heat anomalies. However, this is expected to become a greater focus in future provided that existing constraints - lack of understanding of ecosystem services amongst key stakeholders, limited political support, funding constraints - can be overcome. Our findings suggest that the adoption of a proactive urban forest strategy, underpinned by quantified and valued urban forest-based ecosystem services provision data, and innovative private sector funding mechanisms, can facilitate a change to a

  8. Nuclear safety approach for PWRs design and operation

    International Nuclear Information System (INIS)

    Vignon, D.

    1988-01-01

    The implementation of France's major nuclear programme - 56 PWR units in service or under construction - has gone hand in hand with the development of an original philosophy in the field of nuclear safety. From an initial core of deterministic safety philosophy current in the seventies, which has been wholly retained and in some instances refined, a range of additions has been made to include consideration of a number of additional situations based on a probabilistic approach. This has resulted in a better coherence for safety and a mitigation of the severe accident probability. Furthermore, the establishment of emergency plans has enabled the Safety Authorities and the operator to adopt a coherent and logical approach to severe accidents with the aim of achieving greater defence in depth, this has resulted in the provision of certain additional measures designed to further reduce the consequences of severe accidents. This paper describes the culmination of this work, as exemplified in the new 1 400MWe - N4 advanced plant series currently under construction, of which the essential elements are also incorporated into all previous units, thereby giving them an equivalent level of safety. This now constitutes the French safety policy with respect to PWR nuclear units

  9. 76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

    Science.gov (United States)

    2011-09-09

    ... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... provision: When a motor vehicle safety standard is in effect under this chapter, a State or a political...

  10. Guidelines for the Review of Research Reactor Safety: Revised Edition. Reference Document for IAEA Integrated Safety Assessment of Research Reactors (INSARR)

    International Nuclear Information System (INIS)

    2013-01-01

    The Integrated Safety Assessment of Research Reactors (INSARR) is an IAEA safety review service available to Member States with the objective of supporting them in ensuring and enhancing the safety of their research reactors. This service consists of performing a comprehensive peer review and an assessment of the safety of the respective research reactor. The reviews are based on IAEA safety standards and on the provisions of the Code of Conduct on the Safety of Research Reactors. The INSARR can benefit both the operating organizations and the regulatory bodies of the requesting Member States, and can include new research reactors under design or operating research reactors, including those which are under a Project and Supply Agreement with the IAEA. The first IAEA safety evaluation of a research reactor operated by a Member State was completed in October 1959 and involved the Swiss 20 MW DIORIT research reactor. Since then, and in accordance with its programme on research reactor safety, the IAEA has conducted safety review missions in its Member States to enhance the safety of their research reactor facilities through the application of the Code of Conduct on the Safety of Research Reactors and the relevant IAEA safety standards. About 320 missions in 51 Member States were undertaken between 1972 and 2012. The INSARR missions and other limited scope safety review missions are conducted following the guidelines presented in this publication, which is a revision of Guidelines for the Review of Research Reactor Safety (IAEA Services Series No. 1), published in December 1997. This publication details those IAEA safety standards and guidance publications relevant to the safety of research reactors that have been revised or published since 1997. The purpose of this publication is to give guidance on the preparation, implementation, reporting and follow-up of safety review missions. It is also intended to be of assistance to operators and regulators in conducting

  11. Operational safety at the FFTF

    International Nuclear Information System (INIS)

    Baird, Q.L.; Hagan, J.W.; Seeman, S.E.; Baker, S.M.

    1981-02-01

    An extensive operational nuclear safety program has been an integral part of the design, startup, and initial operating phases of the Fast Flux Test Facility (FFTF). During the design and construction of the facility, a program of independent safety overviews and analyses assured the provision of responsible safety margins within the plant, protective systems, and engineered safety features for protection of the public, operating staff, and the facility. The program is continuing through surveillance of operations to verify continued adherence to the established operating envelope and for timely identification of any trends potentially adverse to those margins. Experience from operation of FFTF is being utilized in the development of enhanced operational nuclear safety aids for application in follow-on breeder reactor power systems. The commendable plant and personnel safety experiences of FFTF through its startup and ascension to full power demonstrate the overall effectiveness of the FFTF operational nuclear safety program

  12. Updated safety analysis of ITER

    International Nuclear Information System (INIS)

    Taylor, Neill; Baker, Dennis; Ciattaglia, Sergio; Cortes, Pierre; Elbez-Uzan, Joelle; Iseli, Markus; Reyes, Susana; Rodriguez-Rodrigo, Lina; Rosanvallon, Sandrine; Topilski, Leonid

    2011-01-01

    An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.

  13. Updated safety analysis of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Neill, E-mail: neill.taylor@iter.org [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Baker, Dennis; Ciattaglia, Sergio; Cortes, Pierre; Elbez-Uzan, Joelle; Iseli, Markus; Reyes, Susana; Rodriguez-Rodrigo, Lina; Rosanvallon, Sandrine; Topilski, Leonid [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

    2011-10-15

    An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.

  14. Hospital safety climate and safety behavior: A social exchange perspective.

    Science.gov (United States)

    Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

    Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

  15. Memory provisions for the Manche Surface Repository

    International Nuclear Information System (INIS)

    Dumont, Jean-Noel; Espiet-Subert, Florence

    2015-01-01

    The French La Manche repository site received its last radioactive waste package in 1994. In 2003, the official surveillance phase of the closed repository started under the supervision of Andra (the national industrial operator), the French Nuclear Safety Authority (ASN) and society (e.g. the local municipalities). Florence Espiet explained that information on the existence of the repository, its content, how it was operated and how it works needs to be preserved. It also is planned to review the information periodically for a minimum of 300 years. She described the creation of two documents on memory (a detailed and a summary one), both on permanent paper, and the preservation of the land registration. The latter constitutes 'passive' provisions for preserving memory. In addition, a number of 'active' provisions are and will be put in place: guided visits, exhibitions, partnerships with organisations dealing with memory preservation, and the creation of a think tank. The latter consists of local citizens and politicians, retired employees from Andra and artists that meet several times a year and reflect on memory preservation from the perspective of, for instance, local history, education, arts and rituals. Finally, two types of markers will be used to preserve the repository's memory: i) three herbaria cataloguing the plants growing on the site of the repository, including a very short description of the repository, will be stored at different sites in France; ii) a stele indicating the main characteristics of the repository, potentially linked to an art work, will be erected at the repository

  16. Radiation protection aspects in the design of nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2008-01-01

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the Contracting Parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  17. Radiation protection aspects of design for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the Contracting Parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  18. Radiation Safety (Qualifications) Regulations 1980

    International Nuclear Information System (INIS)

    1980-01-01

    These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

  19. Doctors and Witches, Conscience and Violence: Abortion Provision on American Television.

    Science.gov (United States)

    Sisson, Gretchen; Kimport, Katrina

    2016-12-01

    Popular entertainment may reflect and produce-as well as potentially contest-stigma regarding abortion provision. Knowledge of how providers are portrayed on-screen is needed to improve understanding of how depictions may contribute to the stigmatization of real providers. All abortion provision plotlines on American television from 2005 to 2014 were identified through Internet searches. Plotlines were assessed in their entirety and coded for genre, abortion provision space, provider characteristics, method and efficacy of provision, and occurrence of violence. Inductive content analysis was used to identify themes in how these features were depicted. Fifty-two plotlines involving abortion provision were identified on 40 television shows; a large majority of plotlines appeared in dramas, particularly in the subgenre of medical dramas. Medical spaces were depicted as normal and safe for abortion provision, and nonmedical spaces were often portrayed as remote and unsafe. Legal abortion care using medical methods was depicted as effective and safe, and legal providers were presented as compassionate, while providers operating outside of medical and legal authority were depicted as ineffective, dangerous and uncaring. Fictional providers were largely motivated by the belief that abortion provision is a necessary and moral service. Plotlines linked abortion provision to violence. The differing ways in which legal and illegal abortion are portrayed reveal potential consequences regarding real-world abortion provision, and suggest that representations situated in medical contexts may work to legitimate and destigmatize such provision. Copyright © 2016 by the Guttmacher Institute.

  20. ADMINISTRATIVE PUBLIC SAFETY REGIMES IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Dmitry Bezzubov

    2017-07-01

    Full Text Available Purpose: to analyze existing threats, dangers and challenges the EU countries in terms of the present and the formulation of the basic foundations for the formation of the concept of ensuring public safety in the EU. Methods: Using a comparative method of scientific knowledge identified the major security threats in the EU and proposed substantive provisions of the administrative doctrine improve safety through the use of formal legal method. Results: the paper is dedicated to the problems of public security maintenance in the present-day context. Methods, techniques and strategies of public security maintenance as a scientific and public phenomenon are revealed. The levels of public security maintenance within the European Community are defined. Summarizing mentioned above, the concept of the service state in terms of the EU countries public security maintenance is the definition of course of development of the state mechanism and management of all administrative control branches. The main aim of which is to create mechanisms of risks and threats prevention with the respect to individuals’ rights, freedoms and legal interests in the societies of the EU countries. The concept of the service state as such is a practical result of the EU countries policy on elimination and neutralization of migration, military and terrorist threats. Discussion: in this article the author offers the basic provisions of the administrative doctrine enhance public safety in the European society.

  1. Multimegawatt Space Reactor Safety

    International Nuclear Information System (INIS)

    Stanley, M.L.

    1989-01-01

    The Multimegawatt (MMW) Space Reactor Project supports the Strategic Defense Initiative Office requirement to provide reliable, safe, cost-effective, electrical power in the MMW range. Specifically, power may be used for neutral particle beams, free electron lasers, electromagnetic launchers, and orbital transfer vehicles. This power plant technology may also apply to the electrical power required for other uses such as deep-space probes and planetary exploration. The Multimegawatt Space Reactor Project, the Thermionic Fuel Element Verification Program, and Centaurus Program all support the Multimegawatt Space Nuclear Power Program and form an important part of the US Department of Energy's (DOE's) space and defense power systems activities. A major objective of the MMW project is the development of a reference flight system design that provides the desired levels of public safety, health protection, and special nuclear material (SNM) protection when used during its designated missions. The safety requirements for the MMW project are a hierarchy of requirements that consist of safety requirements/regulations, a safety policy, general safety criteria, safety technical specifications, safety design specifications, and the system design. This paper describes the strategy and philosophy behind the development of the safety requirements imposed upon the MMW concept developers. The safety organization, safety policy, generic safety issues, general safety criteria, and the safety technical specifications are discussed

  2. Safety design of Qinshan Nuclear Power Plant

    International Nuclear Information System (INIS)

    Ouyang Yu; Zhang Lian; Du Shenghua; Zhao Jiayu

    1984-01-01

    Safety issues have been greatly emphasized through the design of the Qinshan Nuclear Power Plant. Reasonable safety margine has been taken into account in the plant design parameters, the design incorporated various safeguard systems, such as engineering safety feature systems, safety protection systems and the features to resist natural catastrophes, e. g. earthquake, hurricanes, tide and so on. Preliminary safety analysis and environmental effect assessment have been done and anti-accident provisions and emergency policy were carefully considered. Qinshan Nuclear Power Plant safety related systems are designed in accordance with the common international standards established in the late 70's, as well as the existing engineering standard of China

  3. Deterministic Safety Analysis for Nuclear Power Plants. Specific Safety Guide (Spanish Edition); Analisis determinista de seguridad para centrales nucleares. Guia de Seguridad Especifica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the contracting parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  4. Safety culture and public acceptance

    International Nuclear Information System (INIS)

    Mikhalevich, Alexander A.

    2002-01-01

    After the Chernobyl NPP accident a public acceptance has become a key factor in nuclear power development all over the world. Therefore, nuclear safety culture should be based not only on technical principles, responsibilities, supervision, regulatory provisions, emergency preparedness, but the public awareness of minimum risk during the operation and decommissioning of NPPs, radioactive waste management, etc. (author)

  5. The safety of RMBK reactors 10 years after Chernobyl

    International Nuclear Information System (INIS)

    Lederman, L.

    1996-01-01

    In April 1986 the Unit 4 of Chernobyl NPP was destroyed in the worst accident in history of commercial nuclear power. Unit 4 started operation in 1983 and was a RBMK nuclear power plant (NPP). Over the years, three generations of reactors have emerged which have significant differences, particularly with respect to the safety provisions built into their design. The electric power of the RBMK reactors is 1000 MW(e) except for Ignalina whose power is 1500 MW(e). development of the Kursk Unit 5, currently under construction, has led to many design changes hence it can be thought of as a fourth generation. The first generation units (Leningrad-l and -2, Kursk-1 and Chernobyl-l and -2) designed and built before 1982 when new standards on the design and construction of Nuclear Power Plants (NPPs) OPB-82 were introduced in the Soviet Union. Since then other units have designed and constructed in accordance to these requirements. The safety standards in the U were revised again in 1988 (OPB-88). Since the Chernobyl accident a considerable amount of work has been carried out by Ru designers and PTSMK operators to improve RBMK reactor safety and to eliminate the causes o accident. As a result, major design modifications and operational changes have been implemented. However, safety concerns remain, particularly related to first generation units. In the framework of a Programme on PTSMK safety initiated by the IAEA in 1992, a total of 58 safety issues related to seven topical areas were identified. The issues related to the six design areas were further ranked according to their perceived impact on plant safety. Safety issues connected to operational areas, particularly those related to ensuring that a high safety culture is an underlying basis for operation, were considered very important. It was stressed that all efforts should be made to implement the related recommendations along with d modifications (author)

  6. The safety of RMBK reactors 10 years after Chernobyl

    Energy Technology Data Exchange (ETDEWEB)

    Lederman, L [International Atomic Energy Agency, Vienna (Austria)

    1996-12-01

    In April 1986 the Unit 4 of Chernobyl NPP was destroyed in the worst accident in history of commercial nuclear power. Unit 4 started operation in 1983 and was a RBMK nuclear power plant (NPP). Over the years, three generations of reactors have emerged which have significant differences, particularly with respect to the safety provisions built into their design. The electric power of the RBMK reactors is 1000 MW(e) except for Ignalina whose power is 1500 MW(e). development of the Kursk Unit 5, currently under construction, has led to many design changes hence it can be thought of as a fourth generation. The first generation units (Leningrad-l and -2, Kursk-1 and Chernobyl-l and -2) designed and built before 1982 when new standards on the design and construction of Nuclear Power Plants (NPPs) OPB-82 were introduced in the Soviet Union. Since then other units have designed and constructed in accordance to these requirements. The safety standards in the U were revised again in 1988 (OPB-88). Since the Chernobyl accident a considerable amount of work has been carried out by Ru designers and PTSMK operators to improve RBMK reactor safety and to eliminate the causes o accident. As a result, major design modifications and operational changes have been implemented. However, safety concerns remain, particularly related to first generation units. In the framework of a Programme on PTSMK safety initiated by the IAEA in 1992, a total of 58 safety issues related to seven topical areas were identified. The issues related to the six design areas were further ranked according to their perceived impact on plant safety. Safety issues connected to operational areas, particularly those related to ensuring that a high safety culture is an underlying basis for operation, were considered very important. It was stressed that all efforts should be made to implement the related recommendations along with d modifications (author).

  7. Auto Safety

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Auto Safety KidsHealth / For Parents / Auto Safety What's in this ... by teaching some basic rules. Importance of Child Safety Seats Using a child safety seat (car seat) ...

  8. 24 CFR 201.16 - Default provision.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Default provision. 201.16 Section... PROPERTY IMPROVEMENT AND MANUFACTURED HOME LOANS Loan and Note Provisions § 201.16 Default provision. The... default by the borrower. ...

  9. Nuclear Safety Review 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-15

    The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis.

  10. Nuclear Safety Review 2013

    International Nuclear Information System (INIS)

    2013-07-01

    The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis

  11. 40 CFR 68.48 - Safety information.

    Science.gov (United States)

    2010-07-01

    ...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.48 Safety information. (a) The... regulated substances, processes, and equipment: (1) Material Safety Data Sheets that meet the requirements...) Equipment specifications; and (5) Codes and standards used to design, build, and operate the process. (b...

  12. Environment, safety and health

    International Nuclear Information System (INIS)

    Luzianovich, L.Ch.; Fardeau, J.C.; Darras, M.

    2000-01-01

    Environment, safety and health were the three topics discussed by the WOC 8 working group of the worldwide gas congress. Environment protection has become a major preoccupation and constraint for natural gas industry at the dawn of the new millennium. It is closely linked with the safety of installation and with the health of workmen who exploit or use natural gas energy: methane emissions, health and safety in gas industry, environment management and evaluation. (J.S.)

  13. Seeking a safety culture

    International Nuclear Information System (INIS)

    Lee, T.

    1993-01-01

    Human organisational failure has been shown to play a significant role in major accidents world-wide in both the nuclear and non-nuclear industries. A recent report called Organising for Safety, published by The Health and Safety Commission, suggests that the nuclear industry should give organisational factors the same emphasis as it does the reduction of equipment failures and individual error. (Author)

  14. Nuclear criticality safety guide

    International Nuclear Information System (INIS)

    Ro, Seong Ki; Shin, Hee Seong; Park, Seong Won; Shin, Young Joon.

    1997-06-01

    Nuclear criticality safety guide was described for handling, transportation and storage of nuclear fissile materials in this report. The major part of the report was excerpted frp, TID-7016(revision 2) and nuclear criticality safety written by Knief. (author). 16 tabs., 44 figs., 5 refs

  15. Optimal Provision of Public Goods

    DEFF Research Database (Denmark)

    Kreiner, Claus Thustrup; Verdelin, Nicolaj

    2012-01-01

    The standard approach to the optimal provision of public goods highlights the importance of distortionary taxation and distributional concerns. A new approach neutralizes distributional concerns by adjusting the income tax schedule. We demonstrate that both approaches are derived from the same...... basic formula. We also take the new approach further by deriving an intuitive formula for the optimal level of public goods, without imposing strong assumptions on preferences. This formula shows that distortionary taxation has a role to play, as in the standard approach. However, the main determinants...

  16. Optimal Provision of Public Goods

    DEFF Research Database (Denmark)

    Kreiner, Claus Thustrup; Verdelin, Nicolaj

    There currently exist two competing approaches in the literature on the optimal provision of public goods. The standard approach highlights the importance of distortionary taxation and distributional concerns. The new approach neutralizes distributional concerns by adjusting the non-linear income...... tax, and finds that this reinvigorates the simple Samuelson rule when preferences are separable in goods and leisure. We provide a synthesis by demonstrating that both approaches derive from the same basic formula. We further develop the new approach by deriving a general, intuitive formula...

  17. Nuclear safety: an international approach: the convention on nuclear safety

    International Nuclear Information System (INIS)

    Rosen, M.

    1994-01-01

    This paper is a general presentation of the IAEA Convention on Nuclear Safety which has already be signed by 50 countries and which is the first legal instrument that directly addresses the safety of nuclear power plants worldwide. The paper gives a review of its development and some key provisions for a better understanding of how this agreement will operate in practice. The Convention consists of an introductory preamble and four chapters consisting of 35 articles dealing with: the principal objectives, definitions and scope of application; the various obligations (general provisions, legislation, responsibility and regulation, general safety considerations taking into account: the financial and human resources, the human factors, the quality assurance, the assessment and verification of safety, the radiation protection and the emergency preparedness; the safety of installations: sitting, design and construction, operation); the periodic meetings of the contracting parties to review national reports on the measures taken to implement each of the obligations, and the final clauses and other judicial provisions common to international agreements. (J.S.). 1 append

  18. Decree no 88-622 of 6 May 1988 on emergency plans, in implementation of Act no 87-565 of 22 July 1987 on the organisation of public safety, forestry protection against fires and prevention of major risks

    International Nuclear Information System (INIS)

    1988-01-01

    This Decree contains provisions concerning special action plans (plans particuliers d'intervention - PPI) which are a type of emergency plan dealing in particular with sites which have at least one large nuclear installation in the following categories: a nuclear reactor with a thermal power greater than ten megawatts; plants for the processing of irradiated nuclear fuels, isotopic separation, chemical conversion of nuclear fuels and their fabrication. The PPI includes the description of the installation concerned, the list of communes on whose territory the emergency plan applies, the measures for protecting and informing the population, the diagrams for its evacuation, as well as information on shelters. Also listed are the emergency measures for neighbouring populations to be taken by the operator before the police authorities intervene or on their behalf [fr

  19. 42 CFR 3.208 - Continued protection of patient safety work product.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Continued protection of patient safety work product... GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.208 Continued protection of patient safety work...

  20. 42 CFR 3.204 - Privilege of patient safety work product.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Privilege of patient safety work product. 3.204... PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.204 Privilege of patient safety work product. (a) Privilege...

  1. 42 CFR 3.212 - Nonidentification of patient safety work product.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Nonidentification of patient safety work product. 3... PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.212 Nonidentification of patient safety work product. (a...

  2. The provision of radiological protection services

    International Nuclear Information System (INIS)

    1965-01-01

    This publication is a code of practice for the provision or radiological protection services for establishments in which, or in part of which, work is primarily with radiation sources. It was prepared with the help of an international panel of experts and representatives of international organizations which have an interest in this field and was promulgated by the Director General of the Agency under the authority of the Board of Governors of the Agency as a code of practice in the framework of the Agency's Safety Standards. The Board of Governors also authorized the Director General to recommend to Member States that the code of practice be taken into account in the formulation of national regulations or recommendations. The Appendix to the code contains a number of examples of the organization of radiological protection services that have been provided by the members of the panel of experts. These examples do not form a part of the code of practice, but are intended to illustrate the methods of organization which have been adopted in different countries.

  3. The Prototypical Majority Effect Under Social Influence.

    Science.gov (United States)

    Koriat, Asher; Adiv-Mashinsky, Shiri; Undorf, Monika; Schwarz, Norbert

    2018-05-01

    Majority views are reported with greater confidence and fluency than minority views, with the difference increasing with majority size. This Prototypical Majority Effect (PME) was attributed generally to conformity pressure, but Koriat et al. showed that it can arise from the processes underlying decision and confidence independent of social influence. Here we examined the PME under conditions that differ in social influence. In Experiment 1, a robust PME emerged in the absence of information about the majority views, but the provision sof that information increased the choice of the majority view and magnified the PME. In Experiment 2, a PME emerged in a minority-biased condition that misled participants to believe that the majority view was the minority view, but the PME was stronger in a majority-biased condition. The results were discussed in terms of a dual-process view: The PME observed under social influence may contain externally driven and internally driven components.

  4. Regional cooperation on nuclear safety

    International Nuclear Information System (INIS)

    Kato, W.Y.; Chen, J.H.; Kim, D.H.; Simmons, R.B.V.; Surguri, S.

    1985-01-01

    A review has been conducted of a number of multi-national and bilateral arrangements between governments and between utility-sponsored organizations which provide the framework for international cooperation in the field of nuclear safety. These arrangements include the routine exchange operational data, experiences, technical reports and regulatory data, provision of special assistance when requested, collaboration in safety research, and the holding of international conferences and seminars. Areas which may be better suited for cooperation on a regional basis are identified. These areas include: exchange of operational data and experience, sharing of emergency planning information, and collaboration in safety research. Mechanisms to initiate regional cooperation in these areas are suggested

  5. Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

  6. Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2000-01-01

    This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

  7. A Safety Management Model for FAR 141 Approved Flight Schools

    OpenAIRE

    Mendonca, Flavio A. C.; Carney, Thomas Q

    2017-01-01

    The Safety Management Annex (Annex 19), which became applicable in November 2013, consolidates safety management provisions previously contained in six other International Civil Aviation Organization (ICAO) Annexes, and will serve as a resource for overarching state safety management responsibilities. Through Annex 19, ICAO has required that its member states develop and implement safety management systems (SMS) to improve safety. This mandate includes an approved training organization that i...

  8. Russia power engineering and power safety

    International Nuclear Information System (INIS)

    D'yakov, A.F.

    1995-01-01

    Results of work of the International consultative meeting: Russian-Europe: strategy of energy safety is described. The purpose of the meeting consisted in discussion of energy situation in Russia and Europe, prospects for provision of reliability, efficiency and safety of fuel and power supply in Russia and the role of the Russian fuel and power resonances in energy supply of Europe. The reporters at the meeting dealt with various aspects related to energy safety

  9. Primates, Provisioning and Plants: Impacts of Human Cultural Behaviours on Primate Ecological Functions.

    Science.gov (United States)

    Sengupta, Asmita; McConkey, Kim R; Radhakrishna, Sindhu

    2015-01-01

    Human provisioning of wildlife with food is a widespread global practice that occurs in multiple socio-cultural circumstances. Provisioning may indirectly alter ecosystem functioning through changes in the eco-ethology of animals, but few studies have quantified this aspect. Provisioning of primates by humans is known to impact their activity budgets, diets and ranging patterns. Primates are also keystone species in tropical forests through their role as seed dispersers; yet there is no information on how provisioning might affect primate ecological functions. The rhesus macaque is a major human-commensal species but is also an important seed disperser in the wild. In this study, we investigated the potential impacts of provisioning on the role of rhesus macaques as seed dispersers in the Buxa Tiger Reserve, India. We studied a troop of macaques which were provisioned for a part of the year and were dependent on natural resources for the rest. We observed feeding behaviour, seed handling techniques and ranging patterns of the macaques and monitored availability of wild fruits. Irrespective of fruit availability, frugivory and seed dispersal activities decreased when the macaques were provisioned. Provisioned macaques also had shortened daily ranges implying shorter dispersal distances. Finally, during provisioning periods, seeds were deposited on tarmac roads that were unconducive for germination. Provisioning promotes human-primate conflict, as commensal primates are often involved in aggressive encounters with humans over resources, leading to negative consequences for both parties involved. Preventing or curbing provisioning is not an easy task as feeding wild animals is a socio-cultural tradition across much of South and South-East Asia, including India. We recommend the initiation of literacy programmes that educate lay citizens about the ill-effects of provisioning and strongly caution them against the practice.

  10. Primates, Provisioning and Plants: Impacts of Human Cultural Behaviours on Primate Ecological Functions.

    Directory of Open Access Journals (Sweden)

    Asmita Sengupta

    Full Text Available Human provisioning of wildlife with food is a widespread global practice that occurs in multiple socio-cultural circumstances. Provisioning may indirectly alter ecosystem functioning through changes in the eco-ethology of animals, but few studies have quantified this aspect. Provisioning of primates by humans is known to impact their activity budgets, diets and ranging patterns. Primates are also keystone species in tropical forests through their role as seed dispersers; yet there is no information on how provisioning might affect primate ecological functions. The rhesus macaque is a major human-commensal species but is also an important seed disperser in the wild. In this study, we investigated the potential impacts of provisioning on the role of rhesus macaques as seed dispersers in the Buxa Tiger Reserve, India. We studied a troop of macaques which were provisioned for a part of the year and were dependent on natural resources for the rest. We observed feeding behaviour, seed handling techniques and ranging patterns of the macaques and monitored availability of wild fruits. Irrespective of fruit availability, frugivory and seed dispersal activities decreased when the macaques were provisioned. Provisioned macaques also had shortened daily ranges implying shorter dispersal distances. Finally, during provisioning periods, seeds were deposited on tarmac roads that were unconducive for germination. Provisioning promotes human-primate conflict, as commensal primates are often involved in aggressive encounters with humans over resources, leading to negative consequences for both parties involved. Preventing or curbing provisioning is not an easy task as feeding wild animals is a socio-cultural tradition across much of South and South-East Asia, including India. We recommend the initiation of literacy programmes that educate lay citizens about the ill-effects of provisioning and strongly caution them against the practice.

  11. Radiation safety aspects at Indus accelerator complex

    International Nuclear Information System (INIS)

    Marathe, R.G.

    2011-01-01

    Indus Accelerator Complex at Raja Ramanna Center for Advanced Technology houses two synchrotron radiation sources Indus-1 and Indus-2 that are being operated round-the-clock to cater to the needs of the research community. Indus-1 is a 450 MeV electron storage ring and Indus-2 is presently being operated with electrons stored at 2 GeV. Bremsstrahlung radiation and photo-neutrons form the major radiation environment in Indus Accelerator Complex. They are produced due to loss of electron-beam occurring at different stages of operation of various accelerators located in the complex. The synchrotron radiation (SR) also contributes as a potential hazard. In order to ensure safety of synchrotron radiation users and operation and maintenance staff working in the complex from this radiation, an elaborate radiation safety system is in place. The system comprises a Personnel Protection System (PPS) and a Radiation Monitoring System (RMS). The PPS includes zoning, radiation shielding, door interlocks, a search and scram system and machine operation trip-interlocks. The RMS consists of area radiation monitors and beam loss monitors, whose data is available online in the Indus control room. Historical data of radiation levels is also available for data analysis. Synchrotron radiation beamlines at Indus-2 are handled in a special manner owing to the possibility of exposure to synchrotron radiation. Shielding hutches with SR monitors are installed at each beamline of Indus-2. Health Physics Unit also carries out regular radiological surveillance for photons and neutrons during various modes of operation and data is logged shift wise. The operation staff is appropriately trained and qualified as per the recommendations of Atomic Energy Regulatory Board (AERB). Safety training is also imparted to the beamline users. Safe operation procedures and operation checklists are being followed strictly. A radiation instrument calibration facility is also being set-up at RRCAT. The radiation

  12. Nuclear safety

    International Nuclear Information System (INIS)

    1991-02-01

    This book reviews the accomplishments, operations, and problems faced by the defense Nuclear Facilities Safety Board. Specifically, it discusses the recommendations that the Safety Board made to improve safety and health conditions at the Department of Energy's defense nuclear facilities, problems the Safety Board has encountered in hiring technical staff, and management problems that could affect the Safety Board's independence and credibility

  13. 38 CFR 61.20 - Life Safety Code capital grants.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.20 Life Safety Code capital grants. (a) This section sets forth provisions for obtaining a Life Safety Code capital grant under 38 U.S.C. 2012... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Life Safety Code capital...

  14. 40 CFR 68.65 - Process safety information.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.65 Process safety... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Process safety information. 68.65... compilation of written process safety information before conducting any process hazard analysis required by...

  15. 49 CFR 238.230 - Safety appliances-new equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-new equipment. 238.230 Section... I Passenger Equipment § 238.230 Safety appliances—new equipment. (a) Applicability. This section..., 2007, that is equipped with a safety appliance, required by the “manner of application” provisions in...

  16. The effect of training and job interruptions on logging crews' safety in ...

    African Journals Online (AJOL)

    The effect of training and job interruptions on logging crews' safety in ... method, experienced and inexperienced crews were studied before training, after ... that provision of appropriate safety gears as well as delivery of on job training are ...

  17. Recommendations from the Health and Safety at Work Sub-Committee

    Science.gov (United States)

    Education in Science, 1976

    1976-01-01

    Provides additional recommendations as the Health and Safety at Work Act of 1974 applies to the storage of flammable liquids, provision of safety equipment, responsibility for technicians and faulty apparatus. (GS)

  18. Development of the status of W and T for the realization of a long-term safety demonstration for the final repository using the examples VSG and Konrad. Report on the Working package 2. Review and development of safety-related assessments of disposal facilities of wastes with negligible heat generation; development and provision of the necessary set of tools using the example of the final repository Konrad; Entwicklung des Standes von W and T bei der Fuehrung eines Langzeitsicherheitsnachweises fuer Endlager an den Beispielen VSG und Konrad. Bericht zum Arbeitspaket 2. Untersuchung und Entwicklung von sicherheitstechnischen Bewertungen fuer Endlager fuer Abfaelle mit vernachlaessigbarer Waermeentwicklung und Bereitstellung des notwendigen Instrumentariums am Beispiel des Endlagers Konrad

    Energy Technology Data Exchange (ETDEWEB)

    Larue, Juergen; Fischer-Appelt, Klaus; Hartwig-Thurat, Eva

    2015-09-15

    In the research project on the ''Review and development of safety-related assessments of disposal facilities with negligible heat generation; development and provision of the necessary set of tools, using the example of the Konrad disposal facility'' (3612R03410), the state of the art in science and technology of the safety-related assessments and sets of tools for building a safety case was examined. The reports pertaining to the two work packages described the further development of the methodology for accident analyses (WP 1) and of building a safety case (WP 2); also, comparisons were drawn on a national and international scale with the methods applied in the licensing procedure of the Konrad disposal facility. A safety case as well as its underlying analyses and methods always has to be brought up to date with the development of the state of the art in science and technology. In Germany, two safety cases regarding the long-term safety of disposal facilities have been prepared. These are the licensing documentation for the Konrad disposal facility in the year 1990 and the research project regarding the preliminary safety case for the Gorleben site (Vorlaeufige Sicherheitsanalyse Gorleben - VSG) in the year 2013, both reflecting the state of development of building a safety case at the respective time. Comparing the two above-mentioned examples of safety cases and taking recent international recommendations and national regulations into account, this report on Work Package 2 presents the development of the international state of the art in science and technology. This has been done by summarising the essential differences and similarities of each element of the safety case for the Konrad disposal facility on the one hand and the VSG and the international status on the other hand.

  19. Appendix C: safety design rationale

    International Nuclear Information System (INIS)

    Ghose, S.

    1985-01-01

    A brief discussion of the rationale for safety design of fusion plants is presented in the main text. Further detail safety considerations are presented in this appendix in the form of charts and tables. The author present some of the major safety criteria and other criteria used in blanket selection here

  20. Occupational sun protection: workplace culture, equipment provision and outdoor workers' characteristics.

    Science.gov (United States)

    Reeder, Anthony I; Gray, Andrew; McCool, Judith P

    2013-01-01

    The aim of this study was to describe outdoor workers' sun-protective practices, workplace sun-safety culture and sun-protective equipment provision; investigate the association of demographic, personal and occupational factors with sun-protective practices; and identify potential strategies for improving workers' sun protection. The present study used a clustered survey design with randomly identified employers in nine occupations. Employees provided questionnaire measures of demographics, personal characteristics (skin type, skin cancer risk perceptions, tanning attitudes, sun-exposure knowledge), personal occupational sun protection practices (exposure reduction, use of sun-protective clothing, sunscreen and shade), workplace sun-protective equipment provision and perceived workplace sun-safety culture. Summative scores were calculated for attitudes, knowledge, workplace provision and culture. A multivariable model was built with worker and workplace variables as plausible predictors of personal sun protection. In this study, 1,061 workers (69% participation) from 112 workplaces provided sufficient information for analysis. Sex, age, prioritized ethnicity, education and risk perception differed significantly between occupational groups (pworkplace sun-protection equipment provision and supportive culture. After adjustment, each one-point increase in Workplace Sun-safety Culture 2013Score (range 12 points) was associated with a 0.16 higher Personal Sun-Protection Score (pWorkplace Provision Score (range 4 points) was associated with a 0.14 higher score (pworkplace culture are promising components for the development of comprehensive programmes to improve outdoor workers' sun-protective practices.

  1. Drug Safety

    Science.gov (United States)

    ... over-the-counter drug. The FDA evaluates the safety of a drug by looking at Side effects ... clinical trials The FDA also monitors a drug's safety after approval. For you, drug safety means buying ...

  2. Nuclear safety

    International Nuclear Information System (INIS)

    Tarride, Bruno

    2015-10-01

    The author proposes an overview of methods and concepts used in the nuclear industry, at the design level as well as at the exploitation level, to ensure an acceptable safety level, notably in the case of nuclear reactors. He first addresses the general objectives of nuclear safety and the notion of acceptable risk: definition and organisation of nuclear safety (relationships between safety authorities and operators), notion of acceptable risk, deterministic safety approach and main safety principles (safety functions and confinement barriers, concept of defence in depth). Then, the author addresses the safety approach at the design level: studies of operational situations, studies of internal and external aggressions, safety report, design principles for important-for-safety systems (failure criterion, redundancy, failure prevention, safety classification). The next part addresses safety during exploitation and general exploitation rules: definition of the operation domain and of its limits, periodic controls and tests, management in case of incidents, accidents or aggressions

  3. Safety culture

    International Nuclear Information System (INIS)

    Keen, L.J.

    2003-01-01

    Safety culture has become a topic of increasing interest for industry and regulators as issues are raised on safety problems around the world. The keys to safety culture are organizational effectiveness, effective communications, organizational learning, and a culture that encourages the identification and resolution of safety issues. The necessity of a strong safety culture places an onus on all of us to continually question whether the safety measures already in place are sufficient, and are being applied. (author)

  4. The actual development of European aviation safety requirements in aviation medicine: prospects of future EASA requirements.

    Science.gov (United States)

    Siedenburg, J

    2009-04-01

    Common Rules for Aviation Safety had been developed under the aegis of the Joint Aviation Authorities in the 1990s. In 2002 the Basic Regulation 1592/2002 was the founding document of a new entity, the European Aviation Safety Agency. Areas of activity were Certification and Maintenance of aircraft. On 18 March the new Basic Regulation 216/2008, repealing the original Basic Regulation was published and applicable from 08 April on. The included Essential Requirements extended the competencies of EASA inter alia to Pilot Licensing and Flight Operations. The future aeromedical requirements will be included as Annex II in another Implementing Regulation on Personnel Licensing. The detailed provisions will be published as guidance material. The proposals for these provisions have been published on 05 June 2008 as NPA 2008- 17c. After public consultation, processing of comments and final adoption the new proposals may be applicable form the second half of 2009 on. A transition period of four year will apply. Whereas the provisions are based on Joint Aviation Requirement-Flight Crew Licensing (JAR-FCL) 3, a new Light Aircraft Pilot Licence (LAPL) project and the details of the associated medical certification regarding general practitioners will be something new in aviation medicine. This paper consists of 6 sections. The introduction outlines the idea of international aviation safety. The second section describes the development of the Joint Aviation Authorities (JAA), the first step to common rules for aviation safety in Europe. The third section encompasses a major change as next step: the foundation of the European Aviation Safety Agency (EASA) and the development of its rules. In the following section provides an outline of the new medical requirements. Section five emphasizes the new concept of a Leisure Pilot Licence. The last section gives an outlook on ongoing rulemaking activities and the opportunities of the public to participate in them.

  5. Modifications to nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  6. Modifications to nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2007-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  7. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  8. Perceptions of pharmacists and patients on information provision and their influence on patient satisfaction in Japanese community pharmacies.

    Science.gov (United States)

    Takaki, Hiroko; Abe, Takeru; Hagihara, Akihito

    2015-12-01

    The provision of information is now considered a major area in pharmacist-patient interactions. However, few reports have simultaneously evaluated patient and pharmacist perceptions with regard to the pharmacist's information provision. The aims were to clarify the perceptions of pharmacists and patients regarding information provision and the level of influence of those perceptions on patient satisfaction. A cross-sectional survey with respect to information provision was conducted for patients and pharmacists in community pharmacies in Fukuoka Prefecture, Japan. In total, 407 patient-pharmacist pairs were included in a t-test and multilevel analysis. The levels of patient perception regarding information provision were significantly higher than the levels of pharmacist perception in all variables. The pharmacists' perceived level of information provision concerning medication effects had a negative and significant association with patient satisfaction, while the patients' perceived level of information provision by the pharmacist had a positive and significant association with patient satisfaction. Higher patient expectations regarding the level of information provision concerning medication side effects and older age of the pharmacist were adversely related to patient satisfaction. Both pharmacist and patient perceptions of the information provision by pharmacists personalized to the patient had positive associations with patient satisfaction. Pharmacist perceptions related to the information provision were not associated with patient satisfaction. The present study highlights accurate information provision, building good patient-pharmacist relationships, and improving pharmaceutical care in community pharmacy settings. © 2015 John Wiley & Sons, Ltd.

  9. 9 CFR 354.14 - Authority to waive provisions of § 354.12.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Authority to waive provisions of § 354.12. 354.14 Section 354.14 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... plants in specific instances where rabbits are to be brought into compliance with a law under the...

  10. Safety flywheel

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, R.T.

    1977-01-17

    The patent application relates to an inertial energy storage device employing a safety flywheel which is made of flexible material such as a twisted rope ring. The rigidity required for such a device is achieved through centrifugal forces inherent in such a device when it is operating. A small number of the strands of the rope ring have a tensile strength that is lower than the vast majority of the strands of the rope ring whereby should any of these strands fail, they will begin to whiplash allowing such a failure to be detected and braked before a catastrophic failure occurs. This is accomplished by the inclusion of glass tubes located around the periphery of the flywheel. The tubes are in communication with a braking fluid reservoir. The flywheel and glass tubes are enclosed within a vacuum-tight housing.

  11. 78 FR 18960 - Atlantic Coastal Fisheries Cooperative Management Act Provisions; General Provisions for Domestic...

    Science.gov (United States)

    2013-03-28

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XC586 Atlantic Coastal Fisheries Cooperative Management Act Provisions; General Provisions for Domestic Fisheries; Application for Exempted Fishing Permits AGENCY: National Marine Fisheries Service (NMFS), National Oceanic...

  12. Ignalina Safety Analysis Group

    International Nuclear Information System (INIS)

    Ushpuras, E.

    1995-01-01

    The article describes the fields of activities of Ignalina NPP Safety Analysis Group (ISAG) in the Lithuanian Energy Institute and overview the main achievements gained since the group establishment in 1992. The group is working under the following guidelines: in-depth analysis of the fundamental physical processes of RBMK-1500 reactors; collection, systematization and verification of the design and operational data; simulation and analysis of potential accident consequences; analysis of thermohydraulic and neutronic characteristics of the plant; provision of technical and scientific consultations to VATESI, Governmental authorities, and also international institutions, participating in various projects aiming at Ignalina NPP safety enhancement. The ISAG is performing broad scientific co-operation programs with both Eastern and Western scientific groups, supplying engineering assistance for Ignalina NPP. ISAG is also participating in the joint Lithuanian - Swedish - Russian project - Barselina, the first Probabilistic Safety Assessment (PSA) study of Ignalina NPP. The work is underway together with Maryland University (USA) for assessment of the accident confinement system for a range of breaks in the primary circuit. At present the ISAG personnel is also involved in the project under the grant from the Nuclear Safety Account, administered by the European Bank for reconstruction and development for the preparation and review of an in-depth safety assessment of the Ignalina plant

  13. Providing current radiation safety according to new version of 'Ukrytie' object regulation

    International Nuclear Information System (INIS)

    Borovoj, A.A.; Vysotskij, E.D.; Krinitsyn, A.P.; Bogatov, S.A.

    1999-01-01

    Main provisions are given of the 'Ukryttia' object's Regulation related to provision of radiation safety during the object's operation. The safety is provided due to the realization by the object's personnel of functions of global monitoring of current radiation conditions, as well as of the measures of operative or preventive suppression of radiation abnormalities sources

  14. 9 CFR 93.916 - Special provisions.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Special provisions. 93.916 Section 93... § 93.916 Special provisions. (a) Slaughter. Live VHS-regulated fish from VHS-regulated regions may be... establishment discharges its waste water to a municipal sewage system that includes waste water disinfection...

  15. 48 CFR 11.107 - Solicitation provision.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Solicitation provision. 11... transaction-based reporting method to report its use of voluntary consensus standards to the National... Use of Voluntary Consensus Standards and in Conformity Assessment Activities”). Use of the provision...

  16. Shelter provision and state sovereignty in Calais

    Directory of Open Access Journals (Sweden)

    Michael Boyle

    2017-06-01

    Full Text Available Government provision of shelter for Calais’ migrant population over the last twenty years has prioritised the assertion of state authority over the alleviation of human suffering. Policies in 2015-16, which involved the destruction of informal shelter and the provision of basic alternative accommodation, continued this trend.

  17. 22 CFR 63.9 - General provisions.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false General provisions. 63.9 Section 63.9 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES PAYMENTS TO AND ON BEHALF OF PARTICIPANTS IN THE INTERNATIONAL EDUCATIONAL AND CULTURAL EXCHANGE PROGRAM § 63.9 General provisions. The following...

  18. 22 CFR 226.48 - Contract provisions.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Contract provisions. 226.48 Section 226.48 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.48 Contract provisions. The...

  19. 30 CFR 847.2 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false General provisions. 847.2 Section 847.2 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PERMANENT PROGRAM... court of competent jurisdiction enters a judgment against or convicts a person under these provisions...

  20. 12 CFR 931.9 - Transition provision.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Transition provision. 931.9 Section 931.9 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL STANDARDS FEDERAL HOME LOAN BANK CAPITAL STOCK § 931.9 Transition provision. (a) In general. Each Bank shall comply...

  1. 12 CFR 1261.2 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false General provisions. 1261.2 Section 1261.2 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS FEDERAL HOME LOAN BANK DIRECTORS Federal Home Loan Bank Boards of Directors: Eligibility and Elections § 1261.2 General provisions. (a...

  2. 40 CFR 141.76 - Recycle provisions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Recycle provisions. 141.76 Section 141...) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.76 Recycle provisions. (a... recycle spent filter backwash water, thickener supernatant, or liquids from dewatering processes must meet...

  3. Fast Flux Test Facility (FFTF) maintenance provisions

    International Nuclear Information System (INIS)

    Marshall, J.L.

    1981-05-01

    The Fast Flux Test Facility (FFTF) was designed with maintainability as a primary parameter, and facilities and provisions were designed into the plant to accommodate the maintenance function. This paper describes the FFTF and its systems. Special maintenance equipment and facilities for performing maintenance on radioactive components are discussed. Maintenance provisions designed into the plant to enhance maintainability are also described

  4. Safety assessment for Generation IV nuclear systems

    International Nuclear Information System (INIS)

    Leahy, T.J.

    2012-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Recent RSWG work has focused on the definition of an integrated safety assessment methodology (ISAM) for evaluating the safety of Generation IV systems. ISAM is an integrated 'tool-kit' consisting of 5 analytical techniques that are available and matched to appropriate stages of Generation IV system concept development: 1) qualitative safety features review - QSR, 2) phenomena identification and ranking table - PIRT, 3) objective provision tree - OPT, 4) deterministic and phenomenological analyses - DPA, and 5) probabilistic safety analysis - PSA. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time

  5. Reactor safety

    International Nuclear Information System (INIS)

    Butz, H.P.; Heuser, F.W.; May, H.

    1985-01-01

    The paper comprises an introduction into nuclear physics bases, the safety concept generally speaking, safety devices of pwr type reactors, accident analysis, external influences, probabilistic safety assessment and risk studies. It further describes operational experience, licensing procedures under the Atomic Energy Law, research in reactor safety and the nuclear fuel cycle. (DG) [de

  6. Energy provision under Obama administration

    Energy Technology Data Exchange (ETDEWEB)

    Gale, J. [IEA Greenhouse Gas R & D Programme, Cheltenham (United Kingdom)

    2009-03-15

    The new bill before the Senate, the American Recovery and Reinvestment Act of 2009, allows for an additional amount for 'Fossil Energy Research and Development' of $4.6 billion, to be available until 30 September 2010 and that $2 billion of that is available for one or more near zero emissions power plant(s). Two further provisions allow for an additional $1 billion for the Department's Clean Coal Power Initiative Round III and a further $1.5 billion for a competitive solicitations for projects that demonstrate carbon capture from industrial sources. Awards for such projects may include plant efficiency improvements for integration with carbon capture technology. The press seems to be divided whether this money will help revive the FutureGen project. The financial commitment should help the G8 achieve its objective of seeing 20 CCS demonstration projects around the world by 2020. An economic stimulus package proposed by the incoming Barack Obama administration include $150 billion to be spent over 10 years to spur next generation biofuels, plug in hybrid vehicles, a new digital electrical grid and new low emission coal plants. The proposal is intended to create jobs and address critical infrastructure in the US.

  7. Health Risk Assessment of Women in Submarines (Phase III): Two Generation Developmental and Reproductive Safety Evaluation of Major Submarine Atmosphere Components (CO, CO2, and O2) in Rats (Rattus norvegicus)

    Science.gov (United States)

    2012-05-31

    creatinine (CREA), globulin (GLOB), glucose (GLU), total bilirubin (TBIL), triglycerides (TRIG), and major electrolyte concentrations (Na+; K+; Cl... index finger along the abdomen. The finger was removed and the latency for the pup to roll over and obtain the prone posture with all four paws on...to controls for dams exhibiting evidence of pregnancy (mating index ) and for pregnant dams producing live offspring (gestation index ) were

  8. Implementing the optimal provision of ecosystem services.

    Science.gov (United States)

    Polasky, Stephen; Lewis, David J; Plantinga, Andrew J; Nelson, Erik

    2014-04-29

    Many ecosystem services are public goods whose provision depends on the spatial pattern of land use. The pattern of land use is often determined by the decisions of multiple private landowners. Increasing the provision of ecosystem services, though beneficial for society as a whole, may be costly to private landowners. A regulator interested in providing incentives to landowners for increased provision of ecosystem services often lacks complete information on landowners' costs. The combination of spatially dependent benefits and asymmetric cost information means that the optimal provision of ecosystem services cannot be achieved using standard regulatory or payment for ecosystem services approaches. Here we show that an auction that sets payments between landowners and the regulator for the increased value of ecosystem services with conservation provides incentives for landowners to truthfully reveal cost information, and allows the regulator to implement the optimal provision of ecosystem services, even in the case with spatially dependent benefits and asymmetric information.

  9. The shaping of organic & healthy school meal provision concepts

    DEFF Research Database (Denmark)

    He, Chen; Mikkelsen, Bent Egberg

    2009-01-01

    School food in Denmark has unlike many other European countries traditionally been the responsibility of parents. However publically driven healthy school food and nutrition strategies is increasingly being applied as a measure to counteract the growing prevalence of obesity among young people. I...... for studying this shaping process and thus has the potential to give valuable insight into the further development of healthy and organic school meals in Denmark.......School food in Denmark has unlike many other European countries traditionally been the responsibility of parents. However publically driven healthy school food and nutrition strategies is increasingly being applied as a measure to counteract the growing prevalence of obesity among young people....... In addition school food has become a major focus for public organic procurement strategies that seeks to create more sustainable public service provision. Since there are no national regulation of school food provision the school and its food supply in Denmark has become an arena for development...

  10. Advance Network Reservation and Provisioning for Science

    Energy Technology Data Exchange (ETDEWEB)

    Balman, Mehmet; Chaniotakis, Evangelos; Shoshani, Arie; Sim, Alex

    2009-07-10

    We are witnessing a new era that offers new opportunities to conduct scientific research with the help of recent advancements in computational and storage technologies. Computational intensive science spans multiple scientific domains, such as particle physics, climate modeling, and bio-informatics simulations. These large-scale applications necessitate collaborators to access very large data sets resulting from simulations performed in geographically distributed institutions. Furthermore, often scientific experimental facilities generate massive data sets that need to be transferred to validate the simulation data in remote collaborating sites. A major component needed to support these needs is the communication infrastructure which enables high performance visualization, large volume data analysis, and also provides access to computational resources. In order to provide high-speed on-demand data access between collaborating institutions, national governments support next generation research networks such as Internet 2 and ESnet (Energy Sciences Network). Delivering network-as-a-service that provides predictable performance, efficient resource utilization and better coordination between compute and storage resources is highly desirable. In this paper, we study network provisioning and advanced bandwidth reservation in ESnet for on-demand high performance data transfers. We present a novel approach for path finding in time-dependent transport networks with bandwidth guarantees. We plan to improve the current ESnet advance network reservation system, OSCARS [3], by presenting to the clients, the possible reservation options and alternatives for earliest completion time and shortest transfer duration. The Energy Sciences Network (ESnet) provides high bandwidth connections between research laboratories and academic institutions for data sharing and video/voice communication. The ESnet On-Demand Secure Circuits and Advance Reservation System (OSCARS) establishes

  11. Conceptual Grounds of Navigation Safety

    Directory of Open Access Journals (Sweden)

    Vladimir Torskiy

    2016-04-01

    Full Text Available The most important global problem being solved by the whole world community nowadays is to provide sustainable mankind development. Recent research in the field of sustainable development states that civilization safety is impossible without transfer sustainable development. At the same time, sustainable development (i.e. preservation of human culture and biosphere is impossible as a system that serves to meet economical, cultural, scientific, recreational and other human needs without safety. Safety plays an important role in sustainable development goals achievement. An essential condition of effective navigation functioning is to provide its safety. The “prescriptive” approach to the navigation safety, which is currently used in the world maritime field, is based on long-term experience and ship accidents investigation results. Thus this approach acted as an the great fact in reduction of number of accidents at sea. Having adopted the International Safety Management Code all the activities connected with navigation safety problems solution were transferred to the higher qualitative level. Search and development of new approaches and methods of ship accidents prevention during their operation have obtained greater importance. However, the maritime safety concept (i.e. the different points on ways, means and methods that should be used to achieve this goal hasn't been formed and described yet. The article contains a brief review of the main provisions of Navigation Safety Conceptions, which contribute to the number of accidents and incidents at sea reduction.

  12. Safety design guide for safety related systems for CANDU 9

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of); Wright, A.C.D. [Atomic Energy of Canada Ltd., Toronto (Canada)

    1996-03-01

    In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new.

  13. Safety design guide for safety related systems for CANDU 9

    International Nuclear Information System (INIS)

    Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

    1996-03-01

    In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new

  14. Use of operational experience in fire safety assessment of nuclear power plants

    International Nuclear Information System (INIS)

    2000-01-01

    Fire hazard has been identified as a major contributor to a plant's operational risk and the international nuclear power industry has been studying and developing tools for defending against this hazard. Considerable progress in design and regulatory requirements for fire safety, in fire protection technology and in related analytical techniques has been made in the past two decades. Substantial efforts have been undertaken worldwide to implement these advances in the interest of improving fire safety both at new and existing nuclear power plants. To assist in these efforts, the IAEA initiated a programme on fire safety that was intended to provide assistance to Member States in improving fire safety in nuclear power plants. In order to achieve this general objective, the IAEA programme aimed at the development of guidelines and good practices, the promotion of advanced fire safety assessment techniques, the exchange of state of the art information between practitioners and the provision of engineering safety advisory services and training in the implementation of internationally accepted practices. During the period 1993-1994, the IAEA activities related to fire safety concentrated on the development of guidelines and good practice documents related to fire safety and fire protection of operating plants. One of the first tasks was the development of a Safety Guide that formulates specific requirements with regard to the fire safety of operating nuclear power plants. Several documents, which provide advice on fire safety inspection, were developed to assist in its implementation. In the period 1995-1996, the programme focused on the preparation of guidelines for the systematic analysis of fire safety at nuclear power plants (NPPs). The IAEA programme on fire safety for 1997-1998 includes tasks aimed at promoting systematic assessment of fire safety related occurrences and dissemination of essential insights from this assessment. One of the topics addressed is the

  15. Safety Assessment for the Decommissioning of Facilities Using Radioactive Material. Safety Guide (Spanish Edition); Evaluacion de la seguridad para la clausura de instalaciones que utilizan materiales radiactivos. Guia De Seguridad

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the Contracting Parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  16. 'BeSAFE', effect-evaluation of internet-based, tailored safety information combined with personal counselling on parents' child safety behaviours: study design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    van Beeck Eduard F

    2010-08-01

    Full Text Available Abstract Background Injuries in or around the home are the most important cause of death among children aged 0-4 years old. It is also a major source of morbidity and loss of quality of life. In order to reduce the number of injuries, the Consumer Safety Institute introduced the use of Safety Information Leaflets in the Netherlands to provide safety education to parents of children aged 0-4 years. Despite current safety education, necessary safety behaviours are still not taken by a large number of parents, causing unnecessary risk of injury among young children. In an earlier study an E-health module with internet-based, tailored safety information was developed and applied. It concerns an advice for parents on safety behaviours in their homes regarding their child. The aim of this study is to evaluate the effect of this safety information combined with personal counselling on parents' child safety behaviours. Methods/Design Parents who are eligible for the regular well-child visit with their child at child age 5-8 months are invited to participate in this study. Participating parents are randomized into one of two groups: 1 internet-based, tailored safety information combined with personal counselling (intervention group, or 2 personal counselling using the Safety Information Leaflets of the Consumer Safety Institute in the Netherlands for children aged 12 to 24 months (control group. All parents receive safety information on safety topics regarding the prevention of falling, poisoning, drowning and burning. Parents of the intervention group will access the internet-based, tailored safety information module when their child is approximately 10 months old. After completion of the assessment questions, the program compiles a tailored safety advice. The parents are asked to devise and inscribe a personal implementation intention. During the next well-child visit, the Child Health Clinic professional will discuss this tailored safety information

  17. Introduction of the Amendment of IAEA Safety Requirements Reflected Lessons Learned from Fukushima Nuclear Accident

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Sang-Kyu; Ahn, Hyung-Joon; Kim, Sun-Hae; Cheong, Jae-Hak [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2015-10-15

    The following five Safety Requirements publications were amended: Governmental, Legal and Regulatory Framework for Safety (GSR Part 1, 2010), Site Evaluation for Nuclear Installations (NS-R-3, 2003), Safety of Nuclear Power Plants: Design (SSR-2/1, 2012), Safety of Nuclear Power Plants: Commissioning and Operation (SSR-2/2, 2011), and Safety Assessment for Facilities and Activities (GSR Part 4, 2009). Figure 1 shows IAEA Safety Standards Categories Major amendments of five Safety Requirements publications were introduced and analyzed in this study. The five IAEA safety requirements publications which are GSR Part 1 and 4, NS-R-3 and SSR-2/1 and 2, were amended to reflect the lesson learned from the Fukushima accident and other operating experiences. Specially, 36 provisions were modified and the new 29 provision with 1 requirement (No. 67: Emergency response facilities on the site) of the SSR-2/1 were established. Since the Fukushima accident happened, a new word, design extension conditions (DECs) which cover substantially the beyond design basis accidents (BDBA), including severe accident conditions, was created and more elaborated by the world nuclear experts. Design extension conditions could include conditions in events without significant fuel degradation and conditions with core melting. Figure 2 shows the range of the DECs. The amendment of the five IAEA safety requirements publications are focused at the prevention of initiating events, which would lead to the DECs, and mitigation of the consequences of DECs by the enhanced defense in depth principle. The following examples of the IAEA requirements to prevent the initiating events are: margins for withstanding external events; margins for avoiding cliff edge effects; safety assessment for multiple facilities or activities at a single site; safety assessment in cases where resources at a facility are shared; consideration of the potential occurrence of events in combination; establishing levels of hazard

  18. 42 CFR 3.210 - Required disclosure of patient safety work product to the Secretary.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Required disclosure of patient safety work product... HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.210 Required disclosure of patient...

  19. The role of international atomic energy agency in maintaining nuclear safety competence

    International Nuclear Information System (INIS)

    Aro, I.; Mazour, T.

    2000-01-01

    This paper provides information how International Atomic Energy Agency can assist Member States in maintaining and developing nuclear safety competence. The topics covered include the development of safety standards, organisation of nuclear safety related conferences, provision of safety reviews, organisation of training courses and topical workshops and publication of training related documents. Usefulness of these activities for competence development is discussed. (author)

  20. National nuclear safety report 1998. Convention on nuclear safety

    International Nuclear Information System (INIS)

    1998-01-01

    The Argentine Republic subscribed the Convention on Nuclear Safety, approved by a Diplomatic Conference in Vienna, Austria, in June 17th, 1994. According to the provisions in Section 5th of the Convention, each Contracting Party shall submit for its examination a National Nuclear Safety Report about the measures adopted to comply with the corresponding obligations. This Report describes the actions that the Argentine Republic is carrying on since the beginning of its nuclear activities, showing that it complies with the obligations derived from the Convention, in accordance with the provisions of its Article 4. The analysis of the compliance with such obligations is based on the legislation in force, the applicable regulatory standards and procedures, the issued licenses, and other regulatory decisions. The corresponding information is described in the analysis of each of the Convention Articles constituting this Report. The present National Report has been performed in order to comply with Article 5 of the Convention on Nuclear Safety, and has been prepared as much as possible following the Guidelines Regarding National Reports under the Convention on Nuclear Safety, approved in the Preparatory Meeting of the Contracting Parties, held in Vienna in April 1997. This means that the Report has been ordered according to the Articles of the Convention on Nuclear Safety and the contents indicated in the guidelines. The information contained in the articles, which are part of the Report shows the compliance of the Argentine Republic, as a contracting party of such Convention, with the obligations assumed

  1. Stressing the Need for Safety in Technical Education

    Science.gov (United States)

    Defore, Jesse j.

    1974-01-01

    Discusses the importance of a safety orientation program in technical education and major components of a safety-conscious working enviroment. Suggests every institution take such measures as appointment of a safety officer, maintenance of a safety posture, inclusion of safety in curricula, and application of good safety practices. (CC)

  2. Review on JMTR safety design for LEU core conversion

    International Nuclear Information System (INIS)

    Komori, Yoshihiro; Yokokawa, Makoto; Saruta, Toru; Inada, Seiji; Sakurai, Fumio; Yamamoto, Katsumune; Oyamada, Rokuro; Saito, Minoru

    1993-12-01

    Safety of the JMTR was fully reviewed for the core conversion to low enriched uranium fuel. Fundamental policies for the JMTR safety design were reconsidered based on the examination guide for safety design of test and research reactors, and safety of the JMTR was confirmed. This report describes the safety design of the JMTR from the viewpoint of major functions for reactor safety. (author)

  3. Objective Provision Tree (OPT) in sodium cooled fast reactors; Objective Provision Tree (OPT) en reactores rapidos refrigerados por sodio. Aplicacion a la funcion de seguridad de evacuacion de calor residual

    Energy Technology Data Exchange (ETDEWEB)

    Queral, C.; Montero-Mayorga, J.; Gonzalez-Cadelo, J.

    2013-07-01

    Application to the safety function of residual heat removal As part of the project {sup S}afety Assessment for Reactor of GEN-IV (SARGEN IV) has been implemented the methodology ISAM from the IAEA to the safety assessment of new sodium reactor designs. Within the ISAM, a new tool to facilitate this assessment is the Objective Provision Tree (OPT) which documents the provisions necessary for each of the levels of defense in depth, as well as for each critical function of security. Due to the design innovations that have sodium reactors, the evaluation of safety and licensing of these reactors requires special considerations. In this work we have analyzed the mechanisms of failure of the safety function concerning the evacuation of waste heat, and have been proposed different provisions for each of the first three levels of defense in depth. The main result of this work is reflected in the elaboration of the OPTs, one for each of the first three levels of defense in depth for the safety of evacuation of residual heat function. These trees represent in a schematic way the provisions necessary to comply with the objectives of each level which are respectively: 1) deviations from normal operation, 2) control of abnormal operation and fault detection and 3) incidental control.

  4. AGI Safety Literature Review

    OpenAIRE

    Everitt, Tom; Lea, Gary; Hutter, Marcus

    2018-01-01

    The development of Artificial General Intelligence (AGI) promises to be a major event. Along with its many potential benefits, it also raises serious safety concerns (Bostrom, 2014). The intention of this paper is to provide an easily accessible and up-to-date collection of references for the emerging field of AGI safety. A significant number of safety problems for AGI have been identified. We list these, and survey recent research on solving them. We also cover works on how best to think of ...

  5. Application of objective provision tree to development of standard review plan for sodium-cooled fast reactor nuclear design

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Moo-Hoon; Suh, Namduk; Choi, Yongwon; Shin, Andong [Korea Institute of Nuclear Safety, Daejon (Korea, Republic of)

    2016-06-15

    A systematic methodology was developed for the standard review plan for sodium-cooled fast reactor nuclear design. The process is first to develop an objective provision tree of sodium-cooled fast reactor for the reactivity control safety function. The provision tree is generally developed by designer to confirm whether the design satisfies the defense-in-depth concept. Then applicability of the current standard review plan of nuclear design for light water reactor to sodium-cooled fast reactor was evaluated and complemented by the developed objective provision tree.

  6. Software quality assurance for safety analysis and risk management at the Savannah River Site

    International Nuclear Information System (INIS)

    Ades, M.J.; Toffer, H.; Crowe, R.D.

    1991-01-01

    As part of its Reactor Operations Improvement Program at the Savannah River Site (SRS), Westinghouse Savannah River Company (WSRC), in cooperation with the Westinghouse Hanford Company, has developed and implemented quality assurance for safety-related software for technical programs essential to the safety and reliability of reactor operations. More specifically, the quality assurance process involved the development and implementation of quality standards and attendant procedures based on industry software quality standards. These procedures were then applied to computer codes in reactor safety and probabilistic risk assessment analyses. This paper provides a review of the major aspects of the WSRC safety-related software quality assurance. In particular, quality assurance procedures are described for the different life cycle phases of the software that include the Requirements, Software Design and Implementation, Testing and Installation, Operation and Maintenance, and Retirement Phases. For each phase, specific provisions are made to categorize the range of activities, the level of responsibilities, and the documentation needed to assure the control of the software. The software quality assurance procedures developed and implemented are evolutionary in nature, and thus, prone to further refinements. These procedures, nevertheless, represent an effective controlling tool for the development, production, and operation of safety-related software applicable to reactor safety and probabilistic risk assessment analyses

  7. IAEA safety fundamentals: the safety of nuclear installations and the defence in depth concept

    International Nuclear Information System (INIS)

    Aro, I.

    2005-01-01

    This presentation is a replica of the similar presentation provided by the IAEA Basic Professional Training Course on Nuclear Safety. The presentation utilizes the IAEA Safety Series document No. 110, Safety Fundamentals: the Safety of Nuclear Installations. The objective of the presentation is to provide the basic rationale for actions in provision of nuclear safety. The presentation also provides basis to understand national nuclear safety requirements. There are three Safety Fundamentals documents in the IAEA Safety Series: one for nuclear safety, one for radiation safety and one for waste safety. The IAEA is currently revising its Safety Fundamentals by combining them into one general Safety Fundamentals document. The IAEA Safety Fundamentals are not binding requirements to the Member States. But, a very similar text has been provided in the Convention on Nuclear Safety which is legally binding for the Member State after ratification by the Parliament. This presentation concentrates on nuclear safety. The Safety Fundamentals documents are the 'policy documents' of the IAEA Safety Standards Series. They state the basic objectives, concepts and principles involved in ensuring protection and safety in the development and application of atomic energy for peaceful purposes. They will state - without providing technical details and without going into the application of principles - the rationale for actions necessary in meeting Safety Requirements. Chapter 7 of this presentation describes the basic features of defence in depth concept which is referred to in the Safety Fundamentals document. The defence in depth concept is a key issue in reaching high level of safety specifically at the design stage but as the reader can see the extended concept also refers to the operational stage. The appendix has been taken directly from the IAEA Basic Professional Training Course on Nuclear Safety and applied to the Finnish conditions. The text originates from the references

  8. ELFR: The European Lead Fast Reactor. Design, Safety Approach and Safety Characteristics

    International Nuclear Information System (INIS)

    Alemberti, Alessandro

    2012-01-01

    • In the framework of the LEADER project, the safety approach for a Lead cooled fast reactor has been defined and, in particular, all the possible challenges to the main safety functions and their mechanisms have been specified, in order to better define the needed provisions. • On the basis of the above and taking into account the results of the safety analyses performed during previous project (ELSY), a reference configuration of the ELFR plant has been consolidated, by improving and updating the plant design features. In particular, the emerged safety concerns have been analyzed in the LEADER project and a new set of design options and safety provisions have been proposed. • The combination of favourable Lead coolant inherent characteristics and plant design features, specifically developed to face identified challenges, resulted in a very robust and forgiving design, even in very extreme conditions, as a Fukushima-like scenario

  9. Vaccine Safety

    Science.gov (United States)

    ... During Pregnancy Frequently Asked Questions about Vaccine Recalls Historical Vaccine Safety Concerns FAQs about GBS and Menactra ... CISA Resources for Healthcare Professionals Evaluation Current Studies Historical Background 2001-12 Publications Technical Reports Vaccine Safety ...

  10. SAFETY FIRST

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Ensuring safety while peacefully utilizing nuclear energy is a top priority for China A fter a recent earthquake in Japan caused radioactive leaks at a nuclear power plant in Tokyo, the safety of nuclear energy has again aroused public attention.

  11. Water Safety

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Water Safety KidsHealth / For Parents / Water Safety What's in ... remains your best measure of protection. Making Kids Water Wise It's important to teach your kids proper ...

  12. Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-11-15

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  13. Safety Assessment for Research Reactors and Preparation of the Safety Analysis Report. Specific Safety Guide

    International Nuclear Information System (INIS)

    2011-01-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  14. The safety of addition of nitrous oxide to general anaesthesia in at-risk patients having major non-cardiac surgery (ENIGMA-II): a randomised, single-blind trial.

    Science.gov (United States)

    Myles, Paul S; Leslie, Kate; Chan, Matthew T V; Forbes, Andrew; Peyton, Philip J; Paech, Michael J; Beattie, W Scott; Sessler, Daniel I; Devereaux, P J; Silbert, Brendan; Schricker, Thomas; Wallace, Sophie

    2014-10-18

    Nitrous oxide is commonly used in general anaesthesia but concerns exist that it might increase perioperative cardiovascular risk. We aimed to gather evidence to establish whether nitrous oxide affects perioperative cardiovascular risk. We did an international, randomised, assessor-blinded trial in patients aged at least 45 years with known or suspected coronary artery disease having major non-cardiac surgery. Patients were randomly assigned via automated telephone service, stratified by site, to receive a general anaesthetic with or without nitrous oxide. Attending anaesthetists were aware of patients' group assignments, but patients and assessors were not. The primary outcome measure was a composite of death and cardiovascular complications (non-fatal myocardial infarction, stroke, pulmonary embolism, or cardiac arrest) within 30 days of surgery. Our modified intention-to-treat population included all patients randomly assigned to groups and undergoing induction of general anaesthesia for surgery. This trial is registered at ClinicalTrials.gov, number NCT00430989. Of 10,102 eligible patients, we enrolled 7112 patients between May 30, 2008, and Sept 28, 2013. 3543 were assigned to receive nitrous oxide and 3569 were assigned not to receive nitrous oxide. 3483 patients receiving nitrous oxide and 3509 not receiving nitrous oxide were assessed for the primary outcome. The primary outcome occurred in 283 (8%) patients receiving nitrous oxide and in 296 (8%) patients not receiving nitrous oxide (relative risk 0·96, 95% CI 0·83–1·12; p=0·64). Surgical site infection occurred in 321 (9%) patients assigned to nitrous oxide, and in 311 (9%) patients in the no-nitrous oxide group (p=0·61), and severe nausea and vomiting occurred in 506 patients (15%) assigned to nitrous oxide and 378 patients (11%) not assigned to nitrous oxide (pnitrous oxide use in major non-cardiac surgery. Nitrous oxide did not increase the risk of death and cardiovascular complications or

  15. Status of Occupational Health and Safety and Related Challenges in Expanding Economy of Tanzania.

    Science.gov (United States)

    Mrema, Ezra J; Ngowi, Aiwerasia V; Mamuya, Simon H D

    2015-01-01

    Occupational health and safety is related with economic activities undertaken in the country. As the economic activities grow and expand, occupational injuries and diseases are more likely to increase among workers in different sectors of economy such as agriculture, mining, transport, and manufacture. This may result in high occupational health and safety services demand, which might be difficult to meet by developing countries that are prioritizing economic expansion without regard to their impact on occupational health and safety. To describe the status of occupational health and safety in Tanzania and outline the challenges in provision of occupational health services under the state of an expanding economy. Tanzania's economy is growing steadily, with growth being driven by communications, transport, financial intermediation, construction, mining, agriculture, and manufacturing. Along with this growth, hazards emanating from work in all sectors of the economy have increased and varied. The workers exposed to these hazards suffer from illness and injuries and yet they are not provided with adequate occupational health services. Services are scanty and limited to a few enterprises that can afford it. Existing laws and regulations are not comprehensive enough to cover the entire population. Implementation of legislation is weak and does not protect the workers. Most Tanzanians are not covered by the occupational health and safety law and do not access occupational health services. Thus an occupational health and safety services strategy, backed by legislations and provided with the necessary resources (competent experts, financial and technological resources), is a necessity in Tanzania. The existing legal provisions require major modifications to meet international requirements and standards. OHS regulations and legislations need refocusing, revision, and strengthening to cover all working population. Capacities should be improved through training and research

  16. Costs of egg-laying and offspring provisioning: multifaceted parental investment in a digger wasp.

    Science.gov (United States)

    Field, Jeremy; Turner, Ed; Fayle, Tom; Foster, William A

    2007-02-07

    Nest-building Hymenoptera have been a major testing ground for theories of parental investment and sex allocation. Investment has usually been estimated by the likely costs of offspring provisioning, ignoring other aspects of parental care. Using three experimental treatments, we estimated the costs of egg-laying and provisioning separately under field conditions in a digger wasp Ammophila pubescens. In one treatment, we increased the provisioning effort required per offspring by removing alternate prey items as they were brought to the nest. In two other treatments, we reduced parental effort by either preventing females from provisioning alternate nests or preventing them from both ovipositing and provisioning. Our results indicate that both egg-laying and provisioning represent significant costs of reproduction, expressed as differences in productivity but not survival. A trade-off-based model suggests that other components of parental care such as nest initiation may also represent significant costs. Costs of egg production and nest initiation are probably similar for male and female offspring, so that taking them into account leads to a less male-biased expected sex ratio. Mothers compensated only partially for prey removal in terms of the total provisions they gave to individual offspring.

  17. 28 CFR 16.1 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false General provisions. 16.1 Section 16.1 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION... administration of the Department of Justice. ...

  18. Constitutional Provisions And Administrative Disciplinary Powers ...

    African Journals Online (AJOL)

    Constitutional Provisions And Administrative Disciplinary Powers: The Medical ... and Dental Practitioners Act. This process of administrative adjudication is ... the rights guaranteed to the professionals when they appear before the Tribunal.

  19. 48 CFR 225.7605 - Solicitation provision.

    Science.gov (United States)

    2010-10-01

    ... SYSTEM, DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Secondary Arab Boycott of Israel... accordance with 225.7604, use the provision at 252.225-7031, Secondary Arab Boycott of Israel, in all...

  20. Development of Core Heat Removal Objective Provision Trees for Sodium-Cooled Fast Reactor Defense-in-Depth Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Huichang; Kang, Bongsuk; Lee, Youngho [TUEV Rheinland Korea Ltd., Seoul (Korea, Republic of); Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    Based on the definition of Defense-in-Depth levels and safety functions for KALIMER sodium-cooled fast reactor, suggested in the reference and, OPTs for level 1, 2, and 3 defense-in-depth and core heat removal safety function, were developed and suggested in this paper. The purpose of this OPT is first to assure the defensein-depth design during the licensing of Sodium-Cooled Fast Reactors (SFR), but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of PGSFR (Prototype Gen-IV SFR) is not mature yet, the OPT is developed for KALIMER design. Developed OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defensein-depth evaluation frame for the regulatory reviews for the licensing process. At this moment, the identified provisions have both aspects as requirements and design features already adopted in KALIMER design. In the next stage of this study, derived provisions to be adopted will be compared with the actual design features and findings can be suggested as recommendations for the safety improvement.

  1. Food safety

    Science.gov (United States)

    ... safety URL of this page: //medlineplus.gov/ency/article/002434.htm Food safety To use the sharing features on this page, please enable JavaScript. Food safety refers to the conditions and practices that preserve the quality of food. These practices prevent contamination and foodborne ...

  2. Outsourcing, public Input provision and policy cooperation

    OpenAIRE

    Aronsson, Thomas; Koskela, Erkki

    2009-01-01

    This paper concerns public input provision as an instrument for redistribution under international outsourcing by using a model-economy comprising two countries, North and South, where firms in the North may outsource part of their low-skilled labor intensive production to the South. We consider two interrelated issues: (i) the incentives for each country to modify the provision of public input goods in response to international outsourcing, and (ii) whether international outsourcing justifie...

  3. Obligatory provisions for nuclear power plants

    International Nuclear Information System (INIS)

    Cloosters, W.

    2008-01-01

    To cover the expenses associated with decommissioning and disposal of their nuclear power plants, German nuclear power plant operators set aside a total of more than EUR 30 billion and entered the respective provisions into their balance sheets. One point of eminent importance in this regard is the question whether these provisions are adequate in amount and permitted under accounting and tax laws. The other point to be considered is whether the funds will be available reliably if and when needed. Against the backdrop of these issues, the practice and importance of making these provisions are described. This is followed by an outline of the basic accounting and taxation aspects. It is seen that obligations under public law can be the basis of financial provisions only if there is a obligation sufficiently concrete in terms of time and object. The following examination of applicable obligations under the Atomic Energy Act incumbent upon nuclear power plant operators with regard to decommissioning and disposal results in the finding that such obligations are only partly regulated in the Atomic Energy Act, and that specifications in terms of time and purpose are insufficient. If the national practice of making financial provisions is to be put on a reliable basis, it is recommended to express the law on decommissioning and its mode of financing in more concrete terms in the Atomic Energy Act. In addition to unequivocal decommissioning and disposal obligations, the Atomic Energy Act should also incorporate regulations about financial provisions for decomissioning which are in need of more precise language. The present practice of making provisions is characterized by the risk that the funds necessary for planned decommissioning and disposal may not be available when needed. It is against this background that possible solutions reducing that risk are discussed. A recommendation is expressed to establish a public fund for decommissioning and disposal to which the

  4. ASSESSMENT OF FOOD SAFETY PRACTICES AMONG CASSAVA ...

    African Journals Online (AJOL)

    Philips Olusola

    public policies on food safety management. ... in the contemporary world and a significant factor in the reduction of productivity. There is some .... adduced to the views of the majority who considered food safety practices a big ..... Contingency.

  5. Economic Loan Loss Provision and Expected Loss

    Directory of Open Access Journals (Sweden)

    Stefan Hlawatsch

    2010-10-01

    Full Text Available The intention of a loan loss provision is the anticipation of the loan's expected losses by adjusting the book value of the loan. Furthermore, this loan loss provision has to be compared to the expected loss according to Basel II and, in the case of a difference, liable equity has to be adjusted. This however assumes that the loan loss provision and the expected loss are based on a similar economic rationale, which is only valid conditionally in current loan loss provisioning methods according to IFRS. Therefore, differences between loan loss provisions and expected losses should only result from different approaches regarding the parameter estimation within each model and not due to different assumptions regarding the outcome of the model. The provisioning and accounting model developed in this paper overcomes the before-mentioned shortcomings and is consistent with an economic rationale of expected losses. Additionally, this model is based on a close-to-market valuation of the loan that is in favor of the basic idea of IFRS. Suggestions for changes in current accounting and capital requirement rules are provided.

  6. The provision of assistive technology products and services for people with dementia in the United Kingdom.

    Science.gov (United States)

    Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

    2016-07-01

    In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

  7. DOE contractor radiation safety CBT [computer based training] course

    International Nuclear Information System (INIS)

    Gardner, P.R.

    1986-01-01

    Westinghouse Hanford Company developed a generic Radiation Worker safety CBT course for Department of Energy contractors. Task analysis concentrated on actual and potential tasks and included visits to fourteen different contractor sites. Team Design and Prototype verification formed the major portion of the development phase. Lesson entry was accomplished using the WISE author system from WICAT Systems, Inc. The course features graded task simulations for both Pretest and Final; fourteen Topics in five Lessons, each Topic keyed to ''Critical Acts'' and Questions in the Pretest and Final; Automatic, Intensive, and Manual modes of instruction available for each Lesson; Practical Problems and Sample Questions associated with each Topic; and provisions for local configuration in several areas. The course is deliverable on IBM PC compatible equipment. 2 refs

  8. Major Sport Venues

    Data.gov (United States)

    Department of Homeland Security — The Major Public Venues dataset is composed of facilities that host events for the National Association for Stock Car Auto Racing, Indy Racing League, Major League...

  9. Major Depression Among Adults

    Science.gov (United States)

    ... Depressive Episode Among Adolescents Data Sources Share Major Depression Definitions Major depression is one of the most ... Bethesda, MD 20892-9663 Follow Us Facebook Twitter YouTube Google Plus NIMH Newsletter NIMH RSS Feed NIMH ...

  10. Safety handbook

    International Nuclear Information System (INIS)

    1990-01-01

    The purpose of the Australian Nuclear Science and Technology Organization's Safety Handbook is to outline simply the fundamental procedures and safety precautions which provide an appropriate framework for safe working with any potential hazards, such as fire and explosion, welding, cutting, brazing and soldering, compressed gases, cryogenic liquids, chemicals, ionizing radiations, non-ionising radiations, sound and vibration, as well as safety in the office. It also specifies the organisation for safety at the Lucas Heights Research Laboratories and the responsibilities of individuals and committees. It also defines the procedures for the scrutiny and review of all operations and the resultant setting of safety rules for them. ills

  11. Relationship of safety culture and process safety

    International Nuclear Information System (INIS)

    Olive, Claire; O'Connor, T. Michael; Mannan, M. Sam

    2006-01-01

    Throughout history, humans have gathered in groups for social, religious, and industrial purposes. As the conglomeration of people interact, a set of underlying values, beliefs, and principles begins to develop that serve to guide behavior within the group. These 'guidelines' are commonly referred to as the group culture. Modern-day organizations, including corporations, have developed their own unique cultures derived from the diversity of the organizational interests and the background of the employees. Safety culture, a sub-set of organizational culture, has been a major focus in recent years. This is especially true in the chemical industry due to the series of preventable, safety-related disasters that occurred in the late seventies and eighties. Some of the most notable disasters, during this time period, occurred at Bhopal, Flixborough, and Seveso. However, current events, like the September 11th terrorist attacks and the disintegration of the Columbia shuttle, have caused an assessment of safety culture in a variety of other organizations

  12. A study of influences of the workers' compensation and injury management regulations on aviation safety at a workplace.

    Science.gov (United States)

    Yadav, Devinder K; Nikraz, Hamid; Chen, Yongqing

    2016-01-01

    As the aviation industries developed, so too did the recognition that there must be an effective regulatory framework to address issues related to the workers' compensation and rehabilitation. All employees would like to work and return home safely from their workplace. Therefore, the efficient management of workplace injury and disease reduces the cost of aviation operations and improves flight safety. Workers' compensation and injury management laws regulate a majority of rehabilitation and compensation issues, but achieving an injury-free workplace remains a major challenge for the regulators. This paper examines the clauses of the workers' compensation and injury management laws of Western Australia related to workplace safety, compensation, and rehabilitations of the injured workers. It also discusses various provisions of common law under the relevant workers' health injury management legislations.

  13. Legislation for the countermeasures on special issues of nuclear safety regulations

    International Nuclear Information System (INIS)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul

    2004-02-01

    Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation

  14. Legislation for the countermeasures on special issues of nuclear safety regulations

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

    2004-02-15

    Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation.

  15. Safety design

    International Nuclear Information System (INIS)

    Kunitomi, Kazuhiko; Shiozawa, Shusaku

    2004-01-01

    JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs. This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R and D needs for establishing the safety philosophy for the future HTGRs are reported

  16. Nuclear Safety

    International Nuclear Information System (INIS)

    1978-09-01

    In this short paper it has only been possible to deal in a rather general way with the standards of safety used in the UK nuclear industry. The record of the industry extending over at least twenty years is impressive and, indeed, unique. No other industry has been so painstaking in protection of its workers and in its avoidance of damage to the environment. Headings are: introduction; how a nuclear power station works; radiation and its effects (including reference to ICRP, the UK National Radiological Protection Board, and safety standards); typical radiation doses (natural radiation, therapy, nuclear power programme and other sources); safety of nuclear reactors - design; key questions (matters of concern which arise in the public mind); safety of operators; safety of people in the vicinity of a nuclear power station; safety of the general public; safety bodies. (U.K.)

  17. An evaluation of safety culture initiatives at BNSF Railway

    Science.gov (United States)

    2015-04-01

    Major safety culture (SC) initiatives initiated in the FRA Office of Research, Technology and Development (RT&D), such as Clear Signal for Action (CSA), the Investigation of Safety Related Occurrences Protocol (ISROP), the Participative Safety Rules ...

  18. Radiation Safety (General) Regulations 1983 (Western Australia)

    International Nuclear Information System (INIS)

    1983-01-01

    The provisions of the Regulations cover, inter alia, the general precautions and requirements relating to radiation safety of the public and radiation workers and registration of irradiating apparatus or premises on which such apparatus is operated. In addition, the Regulations set forth requirements for the operation of such apparatus and for the premises involved. (NEA) [fr

  19. Bases for safety of shipping radioactive materials

    International Nuclear Information System (INIS)

    Frejman, Eh.S.; Shchupanovskij, V.D.; Kaloshin, V.M.

    1986-01-01

    Classification is presented and design of packaging containers for radioactive substance shipment is described. Standard documents and the main activities related to the shipment radiation safety provision are considered. Practical recommendations on environment and personnel protection during radioactive cargo shipment by all types of vehicles are presented

  20. On the road to new nuclear safety

    International Nuclear Information System (INIS)

    Kovacs, Zoltan; Novakova, Helena; Spenlinger, Robert

    2013-01-01

    The article describes the issue of nuclear safety of nuclear power plants and major factors affecting nuclear safety, discusses the consequences of the Fukushima-Daiichi accident, and outlines the advanced concept of nuclear safety which extends the current regulatory requirements for plant safety. This new concept should be adopted globally to prevent occurrences having similar consequences worldwide. The tasks of this new nuclear safety concept are discussed. (orig.)

  1. IRSN opinion on nuclear safety within the frame of the National Debate on Energy Transition

    International Nuclear Information System (INIS)

    2013-06-01

    This note aims at outlining that nuclear safety must be taken into consideration in the debate on energy transition, and more particularly major accidents which may have a radiological impact on populations and on the environment. It outlines that the nuclear sector is generally perceived as a source of innovation, a booster for scientific, industrial and economic excellence, and that reducing the share of nuclear energy could affect these abilities. It discusses the relationship between ageing and safety for the French nuclear reactor fleet. It addresses the issue of a possible accident and the necessary provision of compensation costs. It finally outlines that, even though the probability of severe accidents for reactors of new generation is low, improvement actions are still to be studied, notably regarding the organisational and human context

  2. The Hungarian model project: Strengthening training for operational safety at Paks nuclear power plant

    International Nuclear Information System (INIS)

    Mautner Markhof, F.

    1998-01-01

    The Hungarian Model project (HMP) reflects the commitment to constant increase of safety and reliability of the NPP Paks, the Government of Hungary and the IAEA. It includes some of the most important nuclear power objectives of Paks NPP, namely the strengthening of NPP personnel training and competence through the application of international best practice, the systematic approach to training (SAT), for training operation and maintenance personnel; setting up a state of-the-art maintenance training center (MTC) at Paks and enhancing safety culture at Paks NPP. The IAEA supported implementation of the HMP through fellowships and scientific visits, expert missions, provision of hardware and software for SAT application, and supply od major new uncontaminated items of actual WWER equipment for the MTC

  3. Requesting and granting exemptions to nuclear safety rules

    International Nuclear Information System (INIS)

    1995-02-01

    This standard provides an acceptable process for requesting and granting exemptions to DOE Nuclear Safety rules. The provisions of 10 CFR Part 820.63 allow DOE to determine the procedures to be used to comply with the responsibilities regarding exemption relief from DOE nuclear safety rules. The procedure in this standard defines an acceptable method for meeting these responsibilities

  4. 32 CFR 1903.4 - Vehicles and traffic safety.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Vehicles and traffic safety. 1903.4 Section 1903... CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic beverage. (1) Each person within the vehicle is responsible for complying with the provisions of this...

  5. 29 CFR 1926.21 - Safety training and education.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

  6. 21 CFR 25.16 - Public health and safety emergencies.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Public health and safety emergencies. 25.16... ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration § 25.16 Public health... importance to the public health or safety, may make full adherence to the procedural provisions of NEPA and...

  7. Construction safety in DOE. Part 1, Students guide

    Energy Technology Data Exchange (ETDEWEB)

    Handwerk, E C

    1993-08-01

    This report is the first part of a compilation of safety standards for construction activities on DOE facilities. This report covers the following areas: general safety and health provisions; occupational health and environmental control/haz mat; personal protective equipment; fire protection and prevention; signs, signals, and barricades; materials handling, storage, use, and disposal; hand and power tools; welding and cutting; electrical; and scaffolding.

  8. Nuclear health and safety

    International Nuclear Information System (INIS)

    1990-04-01

    This report summarizes the responsiveness of DOE and contractors to findings contained in DOE technical safety appraisals and environmental surveys. These appraisals and surveys have been done at DOE facilities and sites to find out the extent of the environmental, safety, and health problems and to prioritize them for corrective action. As of January 1990, DOE computer data showed over 1,700 safety and health problems and almost 1,300 environmental problems. The majority of these problems, however, have not yet been corrected. GAO also looked at the extent to which DOE has developed a computerized tracking system to monitor the status of its environmental, safety, and health problems. GAO found that the computer system lacks important information, such as various field office and independent appraisals. Inclusion of this information would provide a more complete picture of the problems at the site

  9. Clean water provision in rural areas of less developed countries

    Energy Technology Data Exchange (ETDEWEB)

    Roundy, R W

    1985-01-01

    The decade of the 1980s is declared as a time to solve global domestic water supply problems. By 1990 international goals include the provision of adequate quantities of clean water to every person on earth. Such goals are justified on the basis of human health, economic well being, political development and equity and public safety. Drawing upon observations from Ethiopia, Malaysia and Liberia, cases where attempts to provide domestic water to villagers and rural town dwellers are presented. In all cited cases attempts to provide safe water have failed or are in jeopardy. Conclusions drawn from these cases include acknowledgement that global goals will best be achieved by approaching local problems one-by-one and recognizing the technical, environmental and human constraints upon safe water provision interact differently from one site to another. To properly plan, implement and maintain safe water systems the current technical solutions must be combined with the contributions of social and environmental scientists on a case-by-case basis.

  10. Patient Safety and Healthcare Quality

    OpenAIRE

    Aikaterini Toska; Panagiotis Kyloudis; Maria Rekleiti; Maria Saridi

    2012-01-01

    Introduction: Due to a variety of circumstances and world-wide research findings, patient safety andquality care during hospitalization have emerged as major issues. Patient safety deficits may burdenhealth systems as well as allocated resources. The international community has examined severalproposals covering general and systemic aspects in order to improve patient safety; several long-termprograms and strategies have also been implemented promoting the participation of health-relatedagent...

  11. Management of safety, safety culture and self assessment

    International Nuclear Information System (INIS)

    Carnino, A.

    2000-01-01

    Safety management is the term used for the measures required to ensure that an acceptable level of safety is maintained throughout the life of an installation, including decommissioning. The safety culture concept and its implementation are described in part one of the paper. The principles of safety are now quite well known and are implemented worldwide. It leads to a situation where harmonization is being achieved as indicated by the entry into force of the Convention on Nuclear Safety. To go beyond the present nuclear safety levels, management of safety and safety culture will be the means for achieving progress. Recent events which took place in major nuclear power countries have shown the importance of the management and the consequences on safety. At the same time, electricity deregulation is coming and will impact on safety through reductions in staffing and in operation and maintenance cost at nuclear installations. Management of safety as well as its control and monitoring by the safety authorities become a key to the future of nuclear energy.(author)

  12. Systems Design Perspective of Healthcare Provision in Humanitarian Aid

    Directory of Open Access Journals (Sweden)

    Ana Laura Santos

    2014-12-01

    Full Text Available This study focuses on the role of Systems Design in addressing the challenges of healthcare provision by international emergency relief organizations in developing countries. More specifically the challenges related to the safety and performance of medical equipment that is transferred in the aftermath of a humanitarian crisis. The aim of this paper is to describe the transfer of medical equipment and its associated challenges from a systems perspective and to reflect on the value of Systems Design as an approach to humanitarian innovation, addressing the identified systemic challenges. The concepts of Human Factors and Ergonomics, and Product-Service Systems will be presented as valuable contributions to support designers in handling a larger degree of complexity throughout the design process and to support them to make informed choices regarding this particular context.

  13. Diabetes Management and Hypoglycemia in Safety Sensitive Jobs

    Directory of Open Access Journals (Sweden)

    See-Muah Lee

    2011-03-01

    Full Text Available The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help rogams.

  14. Diabetes management and hypoglycemia in safety sensitive jobs.

    Science.gov (United States)

    Lee, See-Muah; Koh, David; Chui, Winnie Kl; Sum, Chee-Fang

    2011-03-01

    The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help programs.

  15. Energy Independence and Security Act of 2007: A Summary of Major Provisions

    Science.gov (United States)

    2007-12-21

    costs of the program. Section 548 stresses that funding will supplement, not replace, funding provided by DOE under the Weatherization and State Energy... telecommuting programs. Reports to Congress are required for each of those programs. Section 1204 raises the Small Business Investment Act (SBIA

  16. Nuclear Safety. 1997

    International Nuclear Information System (INIS)

    1998-01-01

    A quick review of the nuclear safety at EDF may be summarized as follows: - the nuclear safety at EDF maintains at a rather good standard; - none of the incidents that took place has had any direct impact upon safety; - the availability remained good; - initiation of the floor 4 reactor generation (N4 unit - 1450 MW) ensued without major difficulties (the Civaux 1 NPP has been coupled to the power network at 24 december 1997); - the analysis of the incidents interesting from the safety point of view presents many similarities with earlier ones. Significant progress has been recorded in promoting actively and directly a safe operation by making visible, evident and concrete the exertion of the nuclear operation responsibility and its control by the hierarchy. The report develops the following chapters and subjects: 1. An overview on 1997; 1.1. The technical issues of the nuclear sector; 1.2. General performances in safety; 1.3. The main incidents; 1.4. Wastes and radiation protection; 2. Nuclear safety management; 2.1. Dynamics and results; 2.2. Ameliorations to be consolidated; 3. Other important issues in safety; 3.1. Probabilistic safety studies; 3.2. Approach for safety re-evaluation; 3.3. The network safety; 3.4. Crisis management; 3.5. The Lifetime program; 3.6. PWR; 3.7. Documentation; 3.8. Competence; 4. Safety management in the future; 4.1. An open future; 4.2. The fast neutron NPP at Creys-Malville; 4.3. Stabilization of the PWR reference frame; 4.4. Implementing the EURATOM directive regarding the radiation protection standards; 4.5. Development of biomedical research and epidemiological studies; 4.6. New regulations concerning the liquid and gaseous effluents; 5. Visions of an open future; 5.1. Alternative views upon safety ay EDF; 5.2. Safety authority; 5.3. International considerations; 5.4. What happens abroad; 5.5. References from non-nuclear domain. Four appendices are added referring to policy of safety management, policy of human factors in NPPs

  17. Childhood bereavement services: a survey of UK provision.

    Science.gov (United States)

    Rolls, L; Payne, S

    2003-07-01

    The purpose of the study was to identify the location, range and type of childhood bereavement service provision in the UK. A questionnaire was mailed to 127 services who were either solely dedicated to childhood bereavement or who offered a service within the range of work of a host organization and for which there was a supporting organizational structure. Responses were received from 108 services (a response rate of 85%). The findings identified that 85% of childhood bereavement services are located in the voluntary sector; 14% are dedicated childhood bereavement services, while 86% are offered as part of a host organization. Forty-four per cent of host organizations are hospices. The majority of services (73%) relied on both paid and unpaid staff, with 11% relying entirely on paid staff and 14% of services relying entirely on unpaid staff. The interventions offered ranged from individual family work (86%), individual child work (62%), groupwork with families (53%) and groupwork with children (45%). In addition, services offered prebereavement support (64%), a 'drop-in' service (17%), information and advice (95%), training (32%) and the provision of resources (88%). As well as offering a service to children and their families, 74% of childhood bereavement services provided a service to 'secondary users', such as schools (66%), the emergency services (28%) and other professionals (63%). In terms of funding, 12% of services relied solely on external sources of funding, including donations, legacies, revenue from the host organization or grants, while 12% of services relied solely on internal sources of funding, including fundraising and training. The majority of services (73%), however, gained income from a range of sources. The study identifies the diversity of provision that has implications for the evaluation of childhood bereavement services.

  18. Good safety culture maintenance at Leningrad nuclear power plant

    International Nuclear Information System (INIS)

    Ardanov, A.

    1996-01-01

    The evidence in favour of the Leningrad NPP commitment to safety tasks, as the case is in the international practice, is The Safety Policy Statement document where safety is declared to be more significant than the power generation related issues, with the entire responsibility for the safety provision taken over by the operating utility. To avoid the situation when the stated safety tasks and policy remain only a declaration, the organizational structure of the operating utility was expanded to include The Safety Control Department and The Quality Control Department whose tasks encompass the control of the achieved safety level, development of recommendations, measures and actions aimed at the safety culture improvement, assessment and revision of the criteria and requirements to the personnel and management. Each individual at LNPP whose activity affects the plant safety has been familiarized with The Safety Policy Statement document

  19. Good safety culture maintenance at Leningrad nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Ardanov, A [Safety Control Dept., Leningrad Nuclear Power Plant, Leningrad (Russian Federation)

    1997-12-31

    The evidence in favour of the Leningrad NPP commitment to safety tasks, as the case is in the international practice, is The Safety Policy Statement document where safety is declared to be more significant than the power generation related issues, with the entire responsibility for the safety provision taken over by the operating utility. To avoid the situation when the stated safety tasks and policy remain only a declaration, the organizational structure of the operating utility was expanded to include The Safety Control Department and The Quality Control Department whose tasks encompass the control of the achieved safety level, development of recommendations, measures and actions aimed at the safety culture improvement, assessment and revision of the criteria and requirements to the personnel and management. Each individual at LNPP whose activity affects the plant safety has been familiarized with The Safety Policy Statement document.

  20. Safety aspects of NPP ageing

    International Nuclear Information System (INIS)

    1995-01-01

    Preparation of safety practices on assessment and management of aging of major NPP components important to safety, CRP on management of aging of concrete containment buildings, CRP on management of aging of in-containment instrumentation and control cables are outlined

  1. Bank loan loss provisions research: A review

    Directory of Open Access Journals (Sweden)

    Peterson K. Ozili

    2017-09-01

    Full Text Available We review the recent academic and policy literature on bank loan loss provisioning. Among other things, we observe that there exist some interaction between LLPs and existing prudential, accounting, institutional, cultural, religious, tax and fiscal frameworks which differ across countries; and we find that managerial discretion in provisioning is strongly linked to income smoothing, capital management, signalling, tax management and other objectives. We also address several issues including the ethical dimensions of income smoothing, factors influencing income smoothing, methodological issues in LLP modelling and the dynamic loan loss provisioning experiment; which opens up several avenues for further research such as: finding a balance between sufficient LLPs which regulators want versus transparent LLPs which standard setters want; the sensitivity of abnormal LLPs to changes in equity; the persistence of abnormal LLPs following CEO exit; country-specific interventions that induce LLP procyclicality in emerging countries; the impact of Basel III on banks' provisioning discretion; LLP behaviour among systemic and non-systemic financial institutions; etc. We conclude that regulators need to pay attention to how much discretion lending institutions should have in determining reported provision estimates, and this has been a long standing issue.

  2. Methods of Services Provision in Slovak Towns

    Directory of Open Access Journals (Sweden)

    Emília Sičáková-Beblavá

    2009-07-01

    Full Text Available This article deals with the methods of services provision in Slovak towns.  It addresses decision-making concerning selected services provision, based on a transaction cost economic model. The article looks at five types of services from that point of view. These are core services, i.e., services that are provided in most Slovak towns, thereby allowing outcomes of decision-making to be compared, and services which can be outsourced according to transaction cost theory. Findings partially confirm the hypothesis: Slovak towns do outsource, though “insourcing” moderately prevails. However, a comparison of several research studies in the area indicates a trend towards higher outsourcing of such local services provision.  The findings show that public bodies do not always select the most suitable methods of services provision, as suggested by the transaction costs theory (the Brown-Potoski model. This indicates that it is not only economic models that influence decision-making concerning the organization of services provision in the Slovak towns.

  3. Simulation of a major tokamak disruption

    International Nuclear Information System (INIS)

    White, R.B.; Monticello, D.A.; Rosenbluth, M.N.

    1977-08-01

    It is known that the internal tokamak disruption leads to a current profile which is flattened inside the surface where the safety factor equals unity. It is shown that such a profile can lead to m = 2 magnetic islands which grow to fill a substantial part of the tokamak cross section in a time consistent with the observations of the major disruption

  4. Safety Management Practices in Small and Medium Enterprises in India

    Directory of Open Access Journals (Sweden)

    Seema Unnikrishnan

    2015-03-01

    Conclusion: Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

  5. Safety of Cargo Aircraft Handling Procedure

    Directory of Open Access Journals (Sweden)

    Daniel Hlavatý

    2017-07-01

    Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

  6. Safety; Avertissement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

  7. Visit safety

    CERN Document Server

    2012-01-01

    Experiment areas, offices, workshops: it is possible to have co-workers or friends visit these places.     You already know about the official visits service, the VIP office, and professional visits. But do you know about the safety instruction GSI-OHS1, “Visits on the CERN site”? This is a mandatory General Safety Instruction that was created to assist you in ensuring safety for all your visits, whatever their nature—especially those that are non-official. Questions? The HSE Unit will be happy to answer them. Write to safety-general@cern.ch.   The HSE Unit

  8. Design Provisions for Station Blackout at Nuclear Power Plants

    International Nuclear Information System (INIS)

    Duchac, Alexander

    2015-01-01

    A station blackout (SBO) is generally known as 'a plant condition with complete loss of all alternating current (AC) power from off-site sources, from the main generator and from standby AC power sources important to safety to the essential and nonessential switchgear buses. Direct current (DC) power supplies and un-interruptible AC power supplies may be available as long as batteries can supply the loads. Alternate AC power supplies are available'. A draft Safety Guide DS 430 'Design of Electrical Power Systems for Nuclear Power Plants' provides recommendations regarding the implementation of Specific Safety Requirements: Design: Requirement 68 for emergency power systems. The Safety Guide outlines several design measures which are possible as a means of increasing the capability of the electrical power systems to cope with a station blackout, without providing detailed implementation guidance. A committee of international experts and advisors from numerous countries is currently working on an IAEA Technical Document (TECDOC) whose objective is to provide a common international technical basis from which the various criteria for SBO events need to be established, to support operation under design basis and design extension conditions (DEC) at nuclear power plants, to document in a comprehensive manner, all relevant aspects of SBO events at NPPs, and to outline critical issues which reflect the lessons learned from the Fukushima Dai-ichi accident. This paper discusses the commonly encountered difficulties associated with establishing the SBO criteria, shares the best practices, and current strategies used in the design and implementation of SBO provisions and outline the structure of the IAEA's SBO TECDOC under development. (author)

  9. 40 CFR 1042.640 - Special provisions for branded engines.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Special provisions for branded engines. 1042.640 Section 1042.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Special Compliance Provisions § 1042.640 Special provisions for branded engines. The following provisions...

  10. EPOS Data and Service Provision

    Science.gov (United States)

    Bailo, Daniele; Jeffery, Keith G.; Atakan, Kuvvet; Harrison, Matt

    2017-04-01

    EPOS is now in IP (implementation phase) after a successful PP (preparatory phase). EPOS consists of essentially two components, one ICS (Integrated Core Services) representing the integrating ICT (Information and Communication Technology) and many TCS (Thematic Core Services) representing the scientific domains. The architecture developed, demonstrated and agreed within the project during the PP is now being developed utilising co-design with the TCS teams and agile, spiral methods within the ICS team. The 'heart' of EPOS is the metadata catalog. This provides for the ICS a digital representation of the TCS assets (services, data, software, equipment, expertise…) thus facilitating access, interoperation and (re-)use. A major part of the work has been interactions with the TCS. The original intention to harvest information from the TCS required (and still requires) discussions to understand fully the TCS organisational structures linked with rights, security and privacy; their (meta)data syntax (structure) and semantics (meaning); their workflows and methods of working and the services offered. To complicate matters further the TCS are each at varying stages of development and the ICS design has to accommodate pre-existing, developing and expected future standards for metadata, data, software and processes. Through information documents, questionnaires and interviews/meetings the EPOS ICS team has collected DDSS (Data, Data Products, Software and Services) information from the TCS. The ICS team developed a simplified metadata model for presentation to the TCS and the ICS team will perform the mapping and conversion from this model to the internal detailed technical metadata model using (CERIF: a EU recommendation to Member States maintained, developed and promoted by euroCRIS www.eurocris.org ). At the time of writing the final modifications of the EPOS metadata model are being made, and the mappings to CERIF designed, prior to the main phase of (meta

  11. Operating experience: safety perspective

    International Nuclear Information System (INIS)

    Piplani, Vivek; Krishnamurthy, P.R.; Kumar, Neeraj; Upadhyay, Devendra

    2015-01-01

    Operating Experience (OE) provides valuable information for improving NPP safety. This may include events, precursors, deviations, deficiencies, problems, new insights to safety, good practices, lessons and corrective actions. As per INSAG-10, an OE program caters as a fundamental means for enhancing the defence-in-depth at NPPs and hence should be viewed as ‘Continuous Safety Performance Improvement Tool’. The ‘Convention on Nuclear Safety’ also recognizes the OE as a tool of high importance for enhancing the NPP safety and its Article 19 mandates each contracting party to establish an effective OE program at operating NPPs. The lessons drawn from major accidents at Three Mile Island, Chernobyl and Fukushima Daiichi NPPs had prompted nuclear stalwarts to change their safety perspective towards NPPs and to frame sound policies on issues like safety culture, severe accident prevention and mitigation. An effective OE program, besides correcting current/potential problems, help in proactively improving the NPP design, operating and maintenance procedures, practices, training, etc., and thus plays vital role in ensuring safe and efficient operation of NPPs. Further it enhances knowledge with regard to equipment operating characteristics, system performance trends and provides data for quantitative and qualitative safety analysis. Besides all above, an OE program inculcates a learning culture in the organisation and thus helps in continuously enhancing the expertise, technical competency and knowledge base of its staff. Nuclear and Radiation Facilities in India are regulated by Atomic Energy Regulatory Board (AERB). Operating Plants Safety Division (OPSD) of AERB is involved in managing operating experience activities. This paper provides insights about the operating experience program of OPSD, AERB (including its on-line data base namely OPSD STAR) and its utilisation in improving the regulations and safety at Indian NPPs/projects. (author)

  12. Mapping medical marijuana: state laws regulating patients, product safety, supply chains and dispensaries, 2017.

    Science.gov (United States)

    Klieger, Sarah B; Gutman, Abraham; Allen, Leslie; Pacula, Rosalie Liccardo; Ibrahim, Jennifer K; Burris, Scott

    2017-12-01

    (1) To describe open source legal data sets, created for research use, that capture the key provisions of US state medical marijuana laws. The data document how state lawmakers have regulated a medicine that remains, under federal law, a Schedule I illegal drug with no legitimate medical use. (2) To demonstrate the variability that exists across states in rules governing patient access, product safety and dispensary practice. Two legal researchers collected and coded state laws governing marijuana patients, product safety and dispensaries in effect on 1 February 2017, creating three empirical legal data sets. We used summary tables to identify the variation in specific statutory provisions specified in each state's medical marijuana law as it existed on 1 February 2017. We compared aspects of these laws to the traditional Federal approach to regulating medicine. Full data sets, codebooks and protocols are available through the Prescription Drug Abuse Policy System (http://www.pdaps.org/; Archived at http://www.webcitation.org/6qv5CZNaZ on 2 June 2017). Twenty-eight states (including the District of Columbia) have authorized medical marijuana. Twenty-seven specify qualifying diseases, which differ across states. All states protect patient privacy; only 14 protect patients against discrimination. Eighteen states have mandatory product safety testing before any sale. While the majority have package/label regulations, states have a wide range of specific requirements. Most regulate dispensaries (25 states), with considerable variation in specific provisions such as permitted product supply sources number of dispensaries per state and restricting proximity to various types of location. The federal ban in the United States on marijuana has resulted in a patchwork of regulatory strategies that are not uniformly consistent with the approach usually taken by the Federal government and whose effectiveness remains unknown. © 2017 Society for the Study of Addiction.

  13. 41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

    Science.gov (United States)

    2010-07-01

    ... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

  14. Nuclear power plant's safety and risk

    International Nuclear Information System (INIS)

    Franzen, L.F.

    1975-01-01

    Starting with a comprehensive safety strategy as evolved over the past years and the present legal provisions for the construction and operation of nuclear power plants, the risk of the intended operation, of accidents and unforeseen events is discussed. Owing to the excellent safety record of nuclear power plants, main emphasis in discussing accidents is given to the precautionary analysis within the framework of the licensing procedure. In this context, hypothetical accidents are mentioned only as having been utilized for general risk comparisons. The development of a comprehensive risk concept for a completely objective safety assessment of nuclear power plants remains as a final goal. (orig.) [de

  15. Fire safety assessment of tunnel structures

    DEFF Research Database (Denmark)

    Gkoumas, Konstantinos; Giuliani, Luisa; Petrini, Francesco

    2011-01-01

    .g. structural and non structural, organizational, human behavior). This is even more truth for the fire safety design of such structures. Fire safety in tunnels is challenging because of the particular environment, bearing in mind also that a fire can occur in different phases of the tunnel’s lifecycle. Plans...... for upgrading fire safety provisions and tunnel management are also important for existing tunnels. In this study, following a brief introduction of issues regarding the above mentioned aspects, the structural performance of a steel rib for a tunnel infrastructure subject to fire is assessed by means...

  16. Content provision and multi-homing

    OpenAIRE

    Pires, Armando J. Garcia

    2015-01-01

    We analyze the effects of multi-homing consumers on content provision by media firms. We develop a model where media firms compete on content provision and advertising revenues, and consumers enjoy network effects from consuming content that other consumers also consume. Media firms have to choose if they are single-content or multi-content, and in the latter case how much content to offer. Competition for advertising revenues gives a two-sided market nature to our model, since advertisers pr...

  17. Dividends Provisions in Croatian Double Taxation Agreements

    Directory of Open Access Journals (Sweden)

    Marjeta Tomulić Vehovec

    2007-03-01

    Full Text Available This paper analyzes the provisions concerning dividends in the double taxation avoidance agreements concluded by the Republic of Croatia. Since the base for taxation is necessarily laid down in domestic law, Croatian legislation is examined as well. The author primarily discusses dividends provisions in four agreements signed with Germany, Austria, Switzerland and Slovenia, in addition to analyzing the differences from and similarities with the OECD Model Convention. Second, the paper briefly explains the methods for eliminating double taxation on income from dividends. Finally, it addresses the changes necessary for accession to the European Union.

  18. Prospects after Major Trauma

    NARCIS (Netherlands)

    Holtslag, H.R.

    2007-01-01

    Introduction. After patients survived major trauma, their prospects, in terms of the consequences for functioning, are uncertain, which may impact severely on patient, family and society. The studies in this thesis describes the long-term outcomes of severe injured patients after major trauma. In

  19. Empirical Analysis of Construction Safety Climate - A Study

    OpenAIRE

    S.V.S.RAJA PRASAD; K.P.REGHUNATH

    2010-01-01

    Safety in the construction industry has always been a major issue. Though much improvement in construction safety has been achieved, the industry still continues to lag behind most other industries with regard to safety. The safety climate of any organization consists of employee’s attitudes towards and perceptions of, health and safety behavior. Construction workers attitudes towards safety are influenced by their perceptions of risk, management, safety rulesand procedures. A measure of safe...

  20. Patient safety culture among nurses.

    Science.gov (United States)

    Ammouri, A A; Tailakh, A K; Muliira, J K; Geethakrishnan, R; Al Kindi, S N

    2015-03-01

    Patient safety is considered to be crucial to healthcare quality and is one of the major parameters monitored by all healthcare organizations around the world. Nurses play a vital role in maintaining and promoting patient safety due to the nature of their work. The purpose of this study was to investigate nurses' perceptions about patient safety culture and to identify the factors that need to be emphasized in order to develop and maintain the culture of safety among nurses in Oman. A descriptive and cross-sectional design was used. Patient safety culture was assessed by using the Hospital Survey on Patient Safety Culture among 414 registered nurses working in four major governmental hospitals in Oman. Descriptive statistics and general linear regression were employed to assess the association between patient safety culture and demographic variables. Nurses who perceived more supervisor or manager expectations, feedback and communications about errors, teamwork across hospital units, and hospital handoffs and transitions had more overall perception of patient safety. Nurses who perceived more teamwork within units and more feedback and communications about errors had more frequency of events reported. Furthermore, nurses who had more years of experience and were working in teaching hospitals had more perception of patient safety culture. Learning and continuous improvement, hospital management support, supervisor/manager expectations, feedback and communications about error, teamwork, hospital handoffs and transitions were found to be major patient safety culture predictors. Investing in practices and systems that focus on improving these aspects is likely to enhance the culture of patient safety in Omani hospitals and others like them. Strategies to nurture patient safety culture in Omani hospitals should focus upon building leadership capacity that support open communication, blame free, team work and continuous organizational learning. © 2014 International

  1. 12 CFR 714.8 - Are the early payment provisions, or interest rate provisions, applicable in leasing arrangements?

    Science.gov (United States)

    2010-01-01

    ... provisions, or interest rate provisions, applicable in leasing arrangements? You are not subject to the early... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Are the early payment provisions, or interest rate provisions, applicable in leasing arrangements? 714.8 Section 714.8 Banks and Banking NATIONAL...

  2. Safety Principles

    Directory of Open Access Journals (Sweden)

    V. A. Grinenko

    2011-06-01

    Full Text Available The offered material in the article is picked up so that the reader could have a complete representation about concept “safety”, intrinsic characteristics and formalization possibilities. Principles and possible strategy of safety are considered. A material of the article is destined for the experts who are taking up the problems of safety.

  3. Safety Systems

    Science.gov (United States)

    Halligan, Tom

    2009-01-01

    Colleges across the country are rising to the task by implementing safety programs, response strategies, and technologies intended to create a secure environment for teachers and students. Whether it is preparing and responding to a natural disaster, health emergency, or act of violence, more schools are making campus safety a top priority. At…

  4. Safety First

    Science.gov (United States)

    Taft, Darryl

    2011-01-01

    Ned Miller does not take security lightly. As director of campus safety and emergency management at the Des Moines Area Community College (DMACC), any threat requires serious consideration. As community college administrators adopt a more proactive approach to campus safety, many institutions are experimenting with emerging technologies, including…

  5. Major nuclear safety and regulatory issues in Korea

    International Nuclear Information System (INIS)

    Chang, Soon Heung

    2004-01-01

    Recently the value of nuclear energy is being re-considered due to the increase of oil price, the lack of energy supply, and the competition with renewable energy source. In Unites States, Europe, and East Asia, the prospects for continuous nuclear energy development or the policy for retaining nuclear energy have been announced. According to the nuclear energy promotion plan in Korea, there are 19 operating nuclear plants currently and more 7 plants will be constructed in the future. Until now, qualitative as well as quantitative growth is remarkable. Korean nuclear power plants achieved world-best level of capacity factor. However, because of the various nuclear industrial activities, we have a lot of regulatory issues for operating plants, building new plants, and other nuclear related facilities such as research reactors or radioactive waste storage facility. In this article, important regulatory issues which are emerging in Korea will be reviewed and the approaches to solve the issues including public acceptance will be presented. Especially, I will go into detail of two special case studies: The one is the thermal sleeve separation incident in Younggwang nuclear units 5 and 6 whose outage lasts about 80 days and 90 days respectively, which is not common in worldwide nuclear history. The other is about consensus meeting of Korea nuclear energy policy which was managed by a non-governmental organization. (author)

  6. Manufacturing and testing experience for FFTF major safety related components

    International Nuclear Information System (INIS)

    Peckinpaugh, C.L.

    1976-01-01

    Experience with FFTF Heat Transport System components during design, manufacturing, and prototype testing is dscussed. Specifically the special design features and the results of the testing performed to assure that the designs provide for safe operation are outlined. Particular emphasis is placed on the full size prototype testing programs and the valuable experience gained

  7. A review of the wind loading zones for flat roofs in code provisions

    NARCIS (Netherlands)

    Geurts, C.P.W.; Kopp, G.A.; Morrison, M.J.

    2013-01-01

    The provisions for wind loads on flat roofs differ considerably between current wind loading standards in different jurisdictions. For a number of major wind loading codes, both the definition of roof zones, and the values applied to determine the wind loads are discussed. This paper concentrates on

  8. Governing Forests for Provisioning Services: The Example of Honey Production in Southwest Ethiopia

    NARCIS (Netherlands)

    Wiersum, F.; Endalamaw, T.B.

    2013-01-01

    Provisioning services are major environmental services provided by forests. Especially in tropical countries, the livelihoods of local people often partly depend on a range of timber and non-timber forest products. The governance arrangements concerning such locally valued environmental services are

  9. Compatibility of safety and security

    International Nuclear Information System (INIS)

    Jalouneix, J.

    2013-01-01

    Nuclear safety means the achievement of proper operating conditions, prevention of accidents or mitigation of accident consequences, resulting in protection of workers, the public and the environment from undue radiation hazards while nuclear security means the prevention and detection of, and response to, theft, sabotage, unauthorized access, illegal transfer or other malicious acts involving nuclear material. Nuclear safety and nuclear security present large similarities in their aim as in their methods and are mutually complementary in the field of protection with regard to the risk of sabotage. However they show specific attributes in certain areas which leads to differences in their implementation. For instance security culture must integrate deterrence and confidentiality while safety culture implies transparency and open dialogue. Two important design principles apply identically for safety and security: the graded approach and the defense in depth. There are also strong similarities in operating provisions: -) a same need to check the availability of the equipment, -) a same need to treat the experience feedback, or -) a same need to update the basic rules. There are also strong similarities in emergency management, for instance the elaboration of emergency plans and the performance of periodic exercises. Activities related to safety of security of an installation must be managed by a quality management system. For all types of nuclear activities and facilities, a well shared safety culture and security culture is the guarantee of a safe and secure operation. The slides of the presentation have been added at the end of the paper

  10. Safety and environmental health handbook

    Science.gov (United States)

    ,

    1989-01-01

    This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

  11. Official News relating to CERN Safety Rules

    CERN Multimedia

    HSE Unit

    2015-01-01

    The CERN Safety Rules listed below have been published on the HSE website (see here) and entered into force on the 9 June 2015:   Safety Regulation SR-M “Mechanical equipment”: http://cern.ch/safety-rules/SR-M_ENv2.htm; this SR-M (version 2) cancels and replaces SR-M (version 1) and the corresponding provisions of General Safety Instruction GSI-M3 “Special Equipment” (version 1).   General Safety Instruction GSI-M-1 “Lifting equipment and accessories”: http://cern.ch/safety-rules/GSI-M-1_ENv2.htm; this GSI-M-1 (version 2) cancels and replaces GSI-M1 (version 1). Specific Safety Instruction SSI-M-1-1 “Slings and lifting chains”: http://cern.ch/safety-rules/SSI-M-1-1_EN.htm; Specific Safety Instruction SSI-M-1-2 “Cranes, bridge cranes, gantry cranes and power-driven hoists”: http://cern.ch/safety-rules/SSI-M-1-2_EN.htm; Specific Safety Instruction SSI-M-1-3 “Non-f...

  12. Software Safety and Security

    CERN Document Server

    Nipkow, T; Hauptmann, B

    2012-01-01

    Recent decades have seen major advances in methods and tools for checking the safety and security of software systems. Automatic tools can now detect security flaws not only in programs of the order of a million lines of code, but also in high-level protocol descriptions. There has also been something of a breakthrough in the area of operating system verification. This book presents the lectures from the NATO Advanced Study Institute on Tools for Analysis and Verification of Software Safety and Security; a summer school held at Bayrischzell, Germany, in 2011. This Advanced Study Institute was

  13. Fuel safety research 1999

    Energy Technology Data Exchange (ETDEWEB)

    Uetsuka, Hiroshi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-07-01

    In April 1999, the Fuel Safety Research Laboratory was newly established as a result of reorganization of the Nuclear Safety Research Center, JAERI. The laboratory was organized by combining three laboratories, the Reactivity Accident Laboratory, the Fuel Reliability Laboratory, and a part of the Sever Accident Research Laboratory. Consequently, the Fuel Safety Research Laboratory is now in charge of all the fuel safety research in JAERI. Various types of experimental and analytical researches are conducted in the laboratory by using the unique facilities such as the Nuclear Safety Research Reactor (NSRR), the Japan Material Testing Reactor (JMTR), the Japan Research Reactor 3 (JRR-3) and hot cells in JAERI. The laboratory consists of five research groups corresponding to each research fields. They are; (a) Research group of fuel behavior under the reactivity initiated accident conditions (RIA group). (b) Research group of fuel behavior under the loss-of-coolant accident conditions (LOCA group). (c) Research group of fuel behavior under the normal operation conditions (JMTR/BOCA group). (d) Research group of fuel behavior analysis (FEMAXI group). (e) Research group of FP release/transport behavior from irradiated fuel (VEGA group). This report summarizes the outline of research activities and major outcomes of the research executed in 1999 in the Fuel Safety Research Laboratory. (author)

  14. International Aspects of Nuclear Safety

    International Nuclear Information System (INIS)

    Lash, T.R.

    2000-01-01

    Even though not all the world's nations have developed a nuclear power industry, nuclear safety is unquestionably an international issue. Perhaps the most compelling proof is the 1986 accident at Chornobyl nuclear power plant in what is now Ukraine. The U.S. Department of Energy conducts a comprehensive, cooperative effort to reduce risks at Soviet-designed nuclear power plants. In the host countries : Armenia, Ukraine, Russia, Bulgaria, the Czech Republic, Hungary, Lithuania, Slovakia, and Kazakhstan joint projects are correcting major safety deficiencies and establishing nuclear safety infrastructures that will be self-sustaining.The U.S. effort has six primary goals: 1. Operational Safety - Implement the basic elements of operational safety consistent with internationally accepted practices. 2. Training - Improve operator training to internationally accepted standards. 3. Safety Maintenance - Help establish technically effective maintenance programs that can ensure the reliability of safety-related equipment. 4. Safety Systems - Implement safety system improvements consistent with remaining plant lifetimes. 5. Safety Evaluations - Transfer the capability to conduct in-depth plant safety evaluations using internationally accepted methods. 6. Legal and Regulatory Capabilities - Facilitate host-country implementation of necessary laws and regulatory policies consistent with their international treaty obligations governing the safe use of nuclear power

  15. Barsebaeck power plant - safety and emergency measures

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    A Swedish-Danish Committee on safety at the Swedish nuclear power plant Barsebaeck was established in 1979 in order to evaluate the nuclear safety at Barsebaeck with a view to the reactor accident at the Three-Mile-Island nuclear power plant March 28, 1979. According to the committees mandate the investigations of the Kemeny Commission, the Rogouin investigation, investigations of the American Nuclear Regulatory Commission, and the Swedish report ''Safe nuclear power'' have been taken into consideration by the Committee. Furthermore, it has formed the basis for the Committees work that the authority responsibility for the safety at Barsebaeck lies with the Swedish authorities, and that these authorities have evaluated the safety aspects before the permissions for operation of the Barsebaeck power plant were given and hereafter currently in connection with the inspection of the power plant. The report prepared by the Commission treats aspects as: a) Nuclear safety at the Barsebaeck power plant, b) reactor safety and emergency provisions, c) common elements in the emergency provision situation in Sweden and Denmark, d) ongoing investigations on course of events during accidents and release limiting safety systems. (BP)

  16. Introduction: The provision of animal health services in a changing world.

    Science.gov (United States)

    de Haan, C

    2004-04-01

    In the future, animal health services in developing countries will need to operate in a continuously changing policy, institutional and commercial environment. Firstly, the changing policies and priorities of national policy-makers regarding public and private sector roles, reinforced in Africa by the donors, have reduced funding and support for the large number of tasks that animal health services have traditionally performed, and there is continuing pressure from policy-makers to focus on what the public sector can do best. Secondly, poverty reduction has become one of the main criteria guiding the allocation of official development assistance, which has major implications for the main target clientele of veterinary services. Thirdly, population growth, increasing income and urbanisation are causing a marked increase in demand for livestock products in the developing world. As a result, the entire livestock commodity chain is undergoing major structural changes, which has significant implications for the definition and control of food safety standards. Fourthly, globalisation, and increasing trade and travel have greatly increased the risk of disease transmission between different countries and continents. Veterinary institutions in the developing world need to adapt to these challenges. They will have to be able to focus on the essential public sector roles. At the same time they must deliver those essential services to the poor, and provide the policy framework to ensure that the inevitable structural changes in the commodity chain take place in an equitable and sustainable fashion, with an acceptable level of health risk for the consumer. According to the weight given to these different objectives, changes in the institutional set-up need to be considered. This issue of the Scientific and Technical Review addresses these challenges. It begins by reviewing the basic economic characteristics underlying the provision of animal health services, and then examines

  17. National Chemistry Teacher Safety Survey

    Science.gov (United States)

    Plohocki, Barbra A.

    This study evaluated the status of secondary school instructional chemistry laboratory safety using a survey instrument which focused on Teacher background Information, Laboratory Safety Equipment, Facility Safety, General Safety, and a Safety Content Knowledge Survey. A fifty question survey instrument based on recent research and questions developed by the researcher was mailed to 500 secondary school chemistry teachers who participated in the 1993 one-week Woodrow Wilson National Fellowship Foundation Chemistry Institute conducted at Princeton University, New Jersey. The data received from 303 respondents was analyzed by t tests and Analysis of Variance (ANOVA). The level of significance for the study was set at ~\\ performance on the Safety Content Knowledge Survey and secondary school chemistry teachers who have had undergraduate and/or graduate safety training and those who have not had undergraduate and/or graduate safety training. Secondary school chemistry teachers who attended school district sponsored safety inservices did not score higher on the Safety Content Knowledge Survey than teachers who did not attend school district sponsored safety inservice sessions. The type of school district (urban, suburban, or rural) had no significant correlation to the type of laboratory safety equipment found in the instructional chemistry laboratory. The certification area (chemistry or other type of certificate which may or may not include chemistry) of the secondary school teacher had no significant correlation to the type of laboratory equipment found in the instructional chemistry laboratory. Overall, this study indicated a majority of secondary school chemistry teachers were interested in attending safety workshops applicable to chemistry safety. Throughout this research project, many teachers indicated they were not adequately instructed on the collegiate level in science safety and had to rely on common sense and self-study in their future teaching careers.

  18. Information provision by regulated public transport companies

    DEFF Research Database (Denmark)

    Deborger, Bruno; Fosgerau, Mogens

    2012-01-01

    We study the interaction between pricing, frequency of service and information provision by public transport firms offering scheduled services, and we do so under various regulatory regimes. The model assumes that users can come to the bus stop or rail station at random or they can plan their trips...

  19. 15 CFR 748.1 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... approval of the Secretary of Commerce or of the Under Secretary for Industry and Security. (d) Electronic... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General provisions. 748.1 Section 748.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU...

  20. Cloud-based Collaborative Business Services Provision

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Cordeiro, J.; Maciaszek, L.A.; Filipe, J.

    2014-01-01

    The notion of service-enhanced product, representing the association of services to manufactured products, offers an important mechanism for value creation and product differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Provision of

  1. 28 CFR 105.27 - Miscellaneous provisions.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Miscellaneous provisions. 105.27 Section 105.27 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIMINAL HISTORY BACKGROUND CHECKS... has elected to opt out; or (ii) A participating State that has not yet established a process for...

  2. 5 CFR 534.506 - Conversion provisions.

    Science.gov (United States)

    2010-01-01

    ... conversion, other than to the minimum rate under 5 U.S.C. 5376, the increase must be approved by the head of... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Conversion provisions. 534.506 Section... OTHER SYSTEMS Pay for Senior-Level and Scientific and Professional Positions § 534.506 Conversion...

  3. 7 CFR 1956.57 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true General provisions. 1956.57 Section 1956.57 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS... and surviving spouse, allowable funeral expenses, and dower and courtesy rights, and specific...

  4. 20 CFR 718.1 - Statutory provisions.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Statutory provisions. 718.1 Section 718.1 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND... establish criteria for the techniques to be used to take chest roentgenograms (X-rays) in connection with a...

  5. 15 CFR 301.1 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General provisions. 301.1 Section 301.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS INSTRUMENTS AND APPARATUS...

  6. 7 CFR 226.15 - Institution provisions.

    Science.gov (United States)

    2010-01-01

    ... personnel supported by funds provided under this part to support a nonprofit nutrition program for the... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM Operational Provisions § 226.15...

  7. Mitigating Provider Uncertainty in Service Provision Contracts

    Science.gov (United States)

    Smith, Chris; van Moorsel, Aad

    Uncertainty is an inherent property of open, distributed and multiparty systems. The viability of the mutually beneficial relationships which motivate these systems relies on rational decision-making by each constituent party under uncertainty. Service provision in distributed systems is one such relationship. Uncertainty is experienced by the service provider in his ability to deliver a service with selected quality level guarantees due to inherent non-determinism, such as load fluctuations and hardware failures. Statistical estimators utilized to model this non-determinism introduce additional uncertainty through sampling error. Inability of the provider to accurately model and analyze uncertainty in the quality level guarantees can result in the formation of sub-optimal service provision contracts. Emblematic consequences include loss of revenue, inefficient resource utilization and erosion of reputation and consumer trust. We propose a utility model for contract-based service provision to provide a systematic approach to optimal service provision contract formation under uncertainty. Performance prediction methods to enable the derivation of statistical estimators for quality level are introduced, with analysis of their resultant accuracy and cost.

  8. 40 CFR 79.58 - Special provisions.

    Science.gov (United States)

    2010-07-01

    ... Non-baseline Products. A manufacturer with total annual sales less than $50 million is not required to... section. (3) Provisions Applicable to Atypical Products. A manufacturer with total annual sales less than... required for aerosol products. EPA will review the submitted information and, at EPA's discretion, may...

  9. 29 CFR 1926.900 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... conduct blasting operations shall use every reasonable precaution including, but not limited to, visual... alternative provisions may be made which are adequately designed to prevent any premature firing of electric...) Blasting operations in the proximity of overhead power lines, communication lines, utility services, or...

  10. 7 CFR 249.25 - Other provisions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Other provisions. 249.25 Section 249.25 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE... (7 U.S.C. 2011, et seq.) and to any other Federal or State food or nutrition assistance program. (b...

  11. National Interference in Local Public Good Provision

    NARCIS (Netherlands)

    A.J. Dur (Robert); K. Staal (Klaas)

    2003-01-01

    textabstractWe analyze a simple model of local public good provision in a country consisting of a large number of heterogeneous regions, each comprising two districts, a city and a village. When districts remain autonomous and local public goods have positive spillover effects on the neighbouring

  12. 36 CFR 62.9 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false General provisions. 62.9 Section 62.9 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR... governments, or other interested individuals or groups to assist in administering the National Natural...

  13. Music Provision in UK Public Libraries

    Science.gov (United States)

    Dorney, Carl; McKnight, Cliff

    2004-01-01

    Public library music provision, as a less traditional role for public libraries, has always caused contention: a vital source of cultural materials within the community though never confirmed to be a core part of library services by the Government. This article concerns itself with a detailed consideration of the decline of music services over the…

  14. Incomplete Contracting Theory and EU Treaty Provisions

    DEFF Research Database (Denmark)

    Citi, Manuele; Jensen, Mads Dagnis

    , the paper utilises an automated text analysis approach to measure the ambiguity of Treaty provisions on a number of indicators. Empirically, the analysis demonstrates a significant association between the indicators of article ambiguity and the number of laws and court rulings. It thus provides support...

  15. 10 CFR 905.34 - Adjustment provisions.

    Science.gov (United States)

    2010-01-01

    ... continue to take place based on existing contract/marketing criteria principles. ... 10 Energy 4 2010-01-01 2010-01-01 false Adjustment provisions. 905.34 Section 905.34 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.34 Adjustment...

  16. 13 CFR 102.41 - Other provisions.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Other provisions. 102.41 Section 102.41 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION RECORD DISCLOSURE AND PRIVACY... the preservation of the constitutional principles of federalism and separation of powers. (d) Medical...

  17. Remote Health Care Provision in Care Homes.

    Science.gov (United States)

    Newbould, Louise; Mountain, Gail; Hawley, Mark; Ariss, Steve

    2017-01-01

    A survey was developed to map provision, knowledge, attitudes and views towards videoconferencing in care homes in Yorkshire and The Humber. The survey was sent to 859 care homes, with a 14% response rate. Twelve homes reported using videoconferencing. Non-users appeared skeptical, managers using the system reported improvements in outcomes.

  18. 7 CFR 250.53 - Contract provisions.

    Science.gov (United States)

    2010-01-01

    ... the food service management company will ensure that its system of inventory management will not... recipient agency's fixed-price contract with a food service management company. Such provisions must also be... management company must credit the recipient agency for the value of all donated foods received for use in...

  19. 38 CFR 61.67 - Recovery provisions.

    Science.gov (United States)

    2010-07-01

    ...) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.67 Recovery provisions. (a) If after 3 years from the date of award of a capital grant, the grant recipient has withdrawn from the VA Homeless Providers Grant and Per Diem Program (Program); does not establish the project for which the grant was made...

  20. 20 CFR 332.1 - Statutory provisions.

    Science.gov (United States)

    2010-04-01

    ..., or, with respect to a female employee, a calendar day on which, because of pregnancy, miscarriage, or... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Statutory provisions. 332.1 Section 332.1 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT...

  1. Constitutional provisions regarding juristic persons | Pienaar ...

    African Journals Online (AJOL)

    The interim Constitution of 1993 and the final Constitution of 1996 contain specific provisions applicable to juristic persons. Juristic persons are also entitled to the fundamental rights contained in the Bill of Rights to the extent that these rights are applicable to them. It must be kept in mind that juristic persons have peculiar ...

  2. 44 CFR 17.625 - Exception provision.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Exception provision. 17.625 Section 17.625 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (GRANTS) § 17.625 Exception...

  3. 42 CFR 412.200 - General provisions.

    Science.gov (United States)

    2010-10-01

    ... PROSPECTIVE PAYMENT SYSTEMS FOR INPATIENT HOSPITAL SERVICES Prospective Payment System for Inpatient Operating... the prospective payment system for inpatient operating costs. Except as provided in this subpart, the... for § 412.60, which deals with DRG classification and weighting factors, the provisions of subparts D...

  4. 15 CFR 700.70 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General provisions. 700.70 Section 700.70 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS...

  5. 15 CFR 700.60 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General provisions. 700.60 Section 700.60 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS...

  6. 15 CFR 700.50 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false General provisions. 700.50 Section 700.50 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS...

  7. 28 CFR 16.40 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false General provisions. 16.40 Section 16.40 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION..., commission, service, or administration of the Department of Justice. (2) Request for access to a record means...

  8. 7 CFR 760.808 - General provisions.

    Science.gov (United States)

    2010-01-01

    ... harvested production does not exist; (2) The loss is due to an ineligible cause of loss or practices, soil... provisions. (a) For calculations of loss, the participant's existing unit structure will be used as the basis... (2) For NAP covered crops, part 1437 of this title. (b) County average yield for loss calculations...

  9. 31 CFR 25.400 - Loan provisions.

    Science.gov (United States)

    2010-07-01

    ... SALES LOANS MADE BY THE DEFENSE SECURITY ASSISTANCE AGENCY AND FOREIGN MILITARY SALES LOANS MADE BY THE FEDERAL FINANCING BANK AND GUARANTEED BY THE DEFENSE SECURITY ASSISTANCE AGENCY Form of Private Loan § 25... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Loan provisions. 25.400 Section 25...

  10. 33 CFR 135.405 - Appeal provisions.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Appeal provisions. 135.405 Section 135.405 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

  11. 5 CFR 9901.361 - General provisions.

    Science.gov (United States)

    2010-01-01

    ...) Introduction. As provided in § 9901.303(a)(2), the provisions of 5 U.S.C. chapter 55, subchapter V, and related... market supplements are treated the same as locality pay under 5 U.S.C. 5304 and are included in computing...

  12. 42 CFR 421.5 - General provisions.

    Science.gov (United States)

    2010-10-01

    ... U.S. Revised Statutes or any other provision of law that requires competitive bidding. (b.... (a) Competitive bidding not required for carriers. CMS may enter into contracts with carriers, or... certain administrative responsibilities that the law imposes. Accordingly, their agreements and contracts...

  13. 31 CFR 281.9 - General provisions.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false General provisions. 281.9 Section 281.9 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE FOREIGN EXCHANGE OPERATIONS § 281.9 General...

  14. 40 CFR 63.1433 - Wastewater provisions.

    Science.gov (United States)

    2010-07-01

    ... for Hazardous Air Pollutant Emissions for Polyether Polyols Production § 63.1433 Wastewater provisions... operation of the treatment process or control technique, the owner or operator shall instead comply with the... calibration gas for Method 25A, 40 CFR part 60, appendix A shall be the single organic HAP representing the...

  15. Advance Provision of Emergency Contraception for Adolescents

    Science.gov (United States)

    Adamji, Jehan-Marie; Swartwout, Kathryn

    2010-01-01

    Emergency contraception is most effective at preventing unintended pregnancy when taken as early as possible following unprotected sexual intercourse. Advance provision of this medication supports more timely and effective use. In the midst of rising teen pregnancy rates, current policies often limit access to emergency contraception for…

  16. 76 FR 41304 - Advisory Committee on Construction Safety and Health (ACCSH)

    Science.gov (United States)

    2011-07-13

    ... arising in the administration of the safety and health provisions under the Contract Work Hours and Safety....; Multilingual Issues, Diversity, Women in Construction-- 3:45 to 5 p.m. For additional information on ACCSH Work... and Health Act of 1970 (29 U.S.C. 656), Section 107 of the Contract Work Hours and Safety Standards...

  17. 33 CFR 1.05-5 - Marine Safety and Security Council.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Marine Safety and Security... SECURITY GENERAL GENERAL PROVISIONS Rulemaking § 1.05-5 Marine Safety and Security Council. The Marine Safety and Security Council, composed of senior Coast Guard officials, acts as policy advisor to the...

  18. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  19. Industrial safety management with emphasis on construction safety

    International Nuclear Information System (INIS)

    Bhattacharya, R.

    2016-01-01

    Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

  20. Major operations and activities

    Energy Technology Data Exchange (ETDEWEB)

    Black, D.G.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development.

  1. Allegheny County Major Rivers

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains locations of major rivers that flow through Allegheny County. These shapes have been taken from the Hydrology dataset. The Ohio River,...

  2. Major operations and activities

    International Nuclear Information System (INIS)

    Black, D.G.

    1995-01-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development

  3. Positioning radiation safety in occupational safety and health programme in an organization

    International Nuclear Information System (INIS)

    Abed Bin Onn

    2000-01-01

    The Atomic Energy Licensing Act 1984, which is under purview of the Ministry of Science, Technology and Environment, and Occupational Safety and Health Act, OSHA 1994, under Ministry of Human Resources were discussed. RPO responsibilities were discussed in detailed. As the conclusion, organization which complies with the provisions of the AELA 1984 are well on the way to complying the requirements of OSHA 1994

  4. Standards: An international framework for nuclear safety

    International Nuclear Information System (INIS)

    Versteeg, J.

    2000-01-01

    The IAEA, uniquely among international organizations concerned with the use of radiation, radioactive materials and nuclear energy, has statutory functions to establish safety standards and to provide for their application in Member States. The IAEA also contributes towards another major element of the 'global safety culture', namely the establishment of legally binding international agreements on safety related issues. (author)

  5. A legislative framework for the safety of nuclear installations in the European Union

    International Nuclear Information System (INIS)

    Kus, S.; Emmerechts, S.

    2009-01-01

    infringement procedures if not satisfied with a member state's implementation of the Directive and refer the matter to the European Court of Justice. The court will therefore have the final decision on, for example, the implementation of nuclear safety requirements, the independence of the regulatory body and the adequacy of human and financial resources. As a last resort, the court may impose a lump sum or penalty payment on the member state which fails to fulfill an obligation. In this way, the Directive may generate a legal effect that is far more important than the Convention on Nuclear Safety, which is considered to be an 'incentive' convention without strict enforcement possibilities. Even though the Directive faces criticism with respect to its 'diluted' provisions, it is in theory forceful from the implementation and enforcement perspectives. It remains to be seen how rigorously the Commission will monitor the way in which the Directive is implemented, and especially its vaguer provisions which are also amongst the most controversial issues in the field of international nuclear law, e.g. the independence of the regulatory body from undue influence. As the Directive states in its preamble, the member states of the European Union have already implemented measures enabling them to achieve a high level of nuclear safety within the Community. Both EURATOM and its member states have cooperated at the international level, subjected their national regulators and regulations to international peer reviews and helped to improve nuclear safety worldwide. The Directive is a major step for achieving a common legal framework and a strong nuclear safety culture in Europe which could become a model for other regions to translate internationally accepted safety standards into a legally binding framework

  6. Fundamental safety principles. Safety fundamentals

    International Nuclear Information System (INIS)

    2006-01-01

    This publication states the fundamental safety objective and ten associated safety principles, and briefly describes their intent and purpose. The fundamental safety objective - to protect people and the environment from harmful effects of ionizing radiation - applies to all circumstances that give rise to radiation risks. The safety principles are applicable, as relevant, throughout the entire lifetime of all facilities and activities - existing and new - utilized for peaceful purposes, and to protective actions to reduce existing radiation risks. They provide the basis for requirements and measures for the protection of people and the environment against radiation risks and for the safety of facilities and activities that give rise to radiation risks, including, in particular, nuclear installations and uses of radiation and radioactive sources, the transport of radioactive material and the management of radioactive waste

  7. Fundamental safety principles. Safety fundamentals

    International Nuclear Information System (INIS)

    2007-01-01

    This publication states the fundamental safety objective and ten associated safety principles, and briefly describes their intent and purpose. The fundamental safety objective - to protect people and the environment from harmful effects of ionizing radiation - applies to all circumstances that give rise to radiation risks. The safety principles are applicable, as relevant, throughout the entire lifetime of all facilities and activities - existing and new - utilized for peaceful purposes, and to protective actions to reduce existing radiation risks. They provide the basis for requirements and measures for the protection of people and the environment against radiation risks and for the safety of facilities and activities that give rise to radiation risks, including, in particular, nuclear installations and uses of radiation and radioactive sources, the transport of radioactive material and the management of radioactive waste

  8. Safety strategy

    International Nuclear Information System (INIS)

    Schultheiss, G.F.

    1980-01-01

    The basis for safety strategy in nuclear industry and especially nuclear power plants is the prevention of radioactivity release inside or outside of the technical installation. Therefore either technical or administrative measures are combined to a general strategy concept. This introduction will explain in more detail the following topics: - basic principles of safety - lines of assurance (LOA) - defense in depth - deterministic and probabilistic methods. This presentation is seen as an introduction to the more detailed discussion following in this course, nevertheless some selected examples will be used to illustrate the aspects of safety strategy development although they might be repeated later on. (orig.)

  9. Safety culture

    International Nuclear Information System (INIS)

    Drukraroff, C.

    2010-01-01

    The concept of Safety Culture was defined after Chernobyl's nuclear accident in 1986. It has not been exempt from discussion interpretations, adding riders, etc..., over the last 24 years because it has to do with human behavior and performance in the organizations. Safety Culture is not an easy task to define, assess and monitor. The proof of it is that today we still discussing and writing about it. How has been the evolution of Safety Culture at the Juzbado Factory since 1985 to today?. What is the strategy that we will be following in the future. (Author)

  10. Radiation safety

    International Nuclear Information System (INIS)

    1996-04-01

    Most of the ionizing radiation that people are exposed to in day-to-day activities comes from natural, rather than manmade, sources. The health effects of radiation - both natural and artificial - are relatively well understood and can be effectively minimized through careful safety measures and practices. The IAEA, together with other international and expert organizations, is helping to promote and institute Basic Safety Standards on an international basis to ensure that radiation sources and radioactive materials are managed for both maximum safety and human benefit

  11. Nuclear Safety

    Energy Technology Data Exchange (ETDEWEB)

    Silver, E G [ed.

    1989-01-01

    This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  12. DOE explosives safety manual. Revision 7

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  13. Safety assessment and verification for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

  14. Safety assessment and verification for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

  15. Prescribing safety, negotiating expertise

    International Nuclear Information System (INIS)

    Rolina, Gregory

    2010-01-01

    Owing to their presumed impact on the safety of high-risk installations, the interactions between regulators and the regulated are a major but seldom explored subject of research in risk management. A study by experts on human and organizational factors in nuclear safety sheds light on the various phases (and their effects) of the process whereby experts produce assessments. Light is shed on a 'negotiated expertise' typical of the French style of safety regulations in nuclear installations. It is based on an ongoing technical dialog between experts and operators ('French cooking' for Anglo-Saxons). This analysis of 'expertise' and thus of the 'logics of action' implemented by experts proposes a typology of actions that can be transposed to other sorts of risk or other fields of activity. It hands us the keys for understanding a very contemporary activity. (author)

  16. Reactor safety

    International Nuclear Information System (INIS)

    Meneley, D.A.

    The people of Ontario have begun to receive the benefits of a low cost, assured supply of electrical energy from CANDU nuclear stations. This indigenous energy source also has excellent safety characteristics. Safety has been one of the central themes of the CANDU development program from its very beginning. A great deal of work has been done to establish that public risks are small. However, safety design criteria are now undergoing extensive review, with a real prospect of more stringent requirements being applied in the future. Considering the newness of the technology it is not surprising that a consensus does not yet exist; this makes it imperative to discuss the issues. It is time to examine the policies and practice of reactor safety management in Canada to decide whether or not further restrictions are justified in the light of current knowledge

  17. Nuclear safety review for the year 2001

    International Nuclear Information System (INIS)

    2002-07-01

    The Nuclear Safety Review for the Year 2001 reports on worldwide efforts to strengthen nuclear and radiation safety, including radioactive waste safety. It is in three parts. Part 1 describes those events in 2001 that have, or may have, significance for nuclear, radiation and waste safety worldwide. It includes developments such as new initiatives in international cooperation, events of safety significance and events that may be indicative of trends in safety. Part 2 describes some of the IAEA's efforts to strengthen international co-operation in nuclear, radiation and waste safety during 2001. It covers legally binding international agreements, non-binding safety standards, and provisions for the application of safety standards. This is done in a very brief manner, because these issues are addressed in more detail in the Agency's Annual Report for 2001. Part 3 presents a brief look ahead to some issues that are likely to be prominent in the coming year(s). The topics covered were selected by the IAEA Secretariat on the basis of trends observed in recent years, account being taken of planned or expected future developments. A draft of the Nuclear Safety Review for the Year 2001 was presented to the March 2002 session of IAEA's Board of Governors. This final version has been prepared taking account of the discussion in the Board. In some places, information has been added to describe developments early in 2002 that were considered pertinent to the discussion of events during 2001

  18. H.R. 3173: A Bill to apply the provisions of OSHA to certain Department of Energy nuclear facilities. Introduced in the House of Representatives, One Hundredth First Congress, First Session, August 4, 1989

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    H.R. 3173: A Bill to apply the provisions of OSHA to certain Department of Energy (DOE) nuclear facilities. The purpose is to improve and enforce standards for employee health and safety at DOE nuclear facilities

  19. Statutory Instrument No. 1439 (C.26) The Health and Safety at Work etc. Act 1974 (Commencement No.1) Order 1974

    International Nuclear Information System (INIS)

    1974-01-01

    This Order brings into operation progressively Parts I, II and IV of the Safety at Work etc. Act of 31 July 1974. Certain provisions entered into force as from 1 October 1974 and the remainder as from 1 April 1974; the provisions respectively relate to the establishment and functions of the Health and Safety Commission, the Health and Safety Executive and the general duties of employers. (NEA) [fr

  20. Safety first!

    CERN Multimedia

    2016-01-01

    Among the many duties I assumed at the beginning of the year was the ultimate responsibility for Safety at CERN: the responsibility for the physical safety of the personnel, the responsibility for the safe operation of the facilities, and the responsibility to ensure that CERN acts in accordance with the highest standards of radiation and environmental protection.   The Safety Policy document drawn up in September 2014 is an excellent basis for the implementation of Safety in all areas of CERN’s work. I am happy to commit during my mandate to help meet its objectives, not least by ensuring the Organization makes available the necessary means to achieve its Safety objectives. One of the main objectives of the HSE (Occupational Health and Safety and Environmental Protection) unit in the coming months is to enhance the measures to minimise CERN’s impact on the environment. I believe CERN should become a role model for an environmentally-aware scientific research laboratory. Risk ...