Analisis Semiotik Sajak Bulang Cahaya

Directory of Open Access Journals (Sweden)

Junaidi Junaidi

2014-11-01

Full Text Available Penelitian ini bertujuan menggali makna tanda yang terdapat dalam sajak Bulang Cahaya karya Rida K Liamsi. Untuk menggali makna itu, pendekatan analisis semiotik Roland Barthes digunakan. Hasil penelitian menunjukkan bahwa sajak ini berisi tanda-tanda bersumber dari kosa kata Melayu lama. Sajak ini juga berisi simbol-simbol yang berkaitan dengan kehidupan orang Melayu. Penggunaan kata-kata Melayu lama dan simbol Melayu memperkuat setting Melayu dalam sajak ini. Analisis makna menunjukkan bahwa seseorang merasakan kedukaan sangat mendalam ketika cintanya harus berakhir, tetapi ia terus merasakan kerinduan dengan kekasihnya yang telah pergi. Mitos cinta yang terdapat dalam pusinya adalah orang tahu bahwa putus cinta itu menyakitkan tetapi orang tetap saja jatuh cinta.

Membandingkan Tingkat Kemiripan Rekaman Voice Changer Menggunakan Analisis Pitch, Formant dan Spectogram

Directory of Open Access Journals (Sweden)

Ahmad Subki

2018-02-01

Full Text Available Audio forensik merupakan salah satu ilmu yang mnyandingkan antara ilmu pengetahuan dan metode ilmiah dalam proses analisis rekaman suara untuk membantu dan mendukung pengungkapan suatu tindak kejahatan yang diperlukan dalam proses persidangan. Undang-undang ITE No.19 Tahun 2016 menyebutkan bahwa rekaman suara merupakan salah satu alat bukti digital yang sah dan dapat digunakan sebagai penguat dakwaan. Rekaman suara yang merupakan barang bukti digital sangatlah mudah dan rentan dimanipulasi, baik secara sengaja maupun tidak disengaja. Pada penelitian ini dilakukan analisis terkait tingkat kemiripan antara rekaman suara voice changer dengan rekaman suara asli menggunakan analisis pitch, formant dan spectogram, rekaman suara yang dianalisis ada dua jenis rekaman suara yaitu suara laki-laki dan suara perempuan. Rekaman suara voice changer  dan rekaman suara asli, diekstrak menggunakan tools praat kemudian informasi yang diperoleh dianalisis dengan analisis statistik pitch, formant dan spectrogrammenggunakan tools gnumeric. Penelitian ini menghasilkan bahwa analisis rekaman suara voice changer dengan rekaman suara asli dapat menggunakan analisis statistik pitch, formant dan spectrogram, rekaman suara voice changer A memiliki tingkat kemiripan yang paling tinggi dengan rekaman suara asli pada posisi low pitch, sedangkan voice changer yang lain lebih sulit untuk diidentifikasi.

Analisi tipologiche e morfologiche a supporto della manutenzione programmata con l’ausilio di rilievi catastali ed analisi Istat in operazioni di esproprio

Directory of Open Access Journals (Sweden)

Agata Lo Tauro

2012-06-01

Full Text Available A seguito di uno studio iniziato nel 1993 presso la Manchester University, su city centres italiani ed inglesi, è stata avviata una indagine sulle trasformazioni diacroniche e sincroniche delle principali tipologie edilizie utilizzando analisi archivistiche, storiche e strumenti normativi, in primis coniugate con la computer graphics e nella mid-term phase con la geomatica in genere. La fase finale della ricerca ha evidenziato la necessità di implementare strategie di “manutenzione programmata” capaci di “prevenire piuttosto che curare”, utilizzando varie tipologie di Open Data implementando approcci pluridisciplinari. Come case-study è stato scelto il centro storico di Acireale. Typological and morphological analysis to support the mainte-nance program with the help of cadastral surveys Following a study that began in 1993 at Manchester Univer-sity, city centers in Italy and UK started an investigation on the diachronic transformations and synchronic analysis of the main building using archival, historical and regulatory instruments, primarily conjugated with computer graphics and in the mid-term phase with the geomatics in general. The final phase of the  research  highlighted  the  need  to  implement  strategies for "scheduled maintenance" capable of  "prevention rather than cure", using various types of Open Date implementing multidisciplinary approaches. As a case study was chosen the historical center of Acireale.

ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

Directory of Open Access Journals (Sweden)

Luki Eko Cahyono

2015-10-01

Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

Rol del fallo mecánico en la optimización del mantenimiento en una central nuclear//Role of the mechanical failure during the maintenance optimization in the nuclear power plant

Directory of Open Access Journals (Sweden)

Antonio Torres-Valle

2012-05-01

Full Text Available Entre las más recientes aplicaciones del Análisis Probabilista de Seguridad (1997 – 2003 de la Central Nuclear Embalse en Argentina, está el Programa de Mantenimiento Orientado a la Seguridad (2006– 2009 el cual se ha desarrollado con el empleo de la metodología de Mantenimiento Centrado en la Confiabilidad (RCM en inglés. El objetivo general del artículo es demostrar la alta contribución de los fallos mecánicos en el diseño de las políticas de mantenimiento de varios sistemas de la instalación a través del empleo de la metodología RCM. La composición, estructura y políticas de explotación de los sistemas tecnológicos de muchas instalaciones con riesgo asociado, similares a las de los sistemas analizados en este estudio, permite inferir que los resultados que se obtendrán serán equivalentes de aplicarse la metodología RCM en dichas instalaciones. Palabras claves: mantenimiento centrado en la confiabilidad, mantenimiento predictivo, mantenimiento preventivo, fallo mecánico, seguridad, confiabilidad, riesgo.______________________________________________________________________________ Abstract One of the most recent applications of Probabilistic Safety Analysis (1997 – 2003 to Embalse Nuclear Power Plant in Argentina, is the Safety Oriented Maintenance Program (2006 – 2009 developed with employment of the Reliability Centered Maintenance (RCM methodology. The general objective of the paper is to demonstrate the high contribution of the mechanical failures in the maintenance program design through the RCM methodology. The composition, structure and operation strategies of the technological systems of many risk associated facilities, similar to the analysed systems included in this study, allow deduce that the results will equivalent in case of application of RCM methodology in such facilities. Key words: reliability centered maintenance (RCM, predictive maintenance, preventive maintenance, mechanical failure, safety

Analisis Sektor/Sub Sektor Unggulan di Kabupaten Bungo

Directory of Open Access Journals (Sweden)

Gafur Gafur

2016-03-01

Full Text Available Abstract. This study aimed to analyze the leading sectors in Bungo. The method used is Location Quotient (LQ, Dynamic Location Quotient (DLQ, specialization index, Growth Ratio Model (MRP. Based on analysis of LQ and DLQ, there are only two basis sectors at present and in the future, namely the construction sector and trade, hotels and restaurants. Based on the analysis of Specialization Index, in Bungo Regency has a concentration of the economy in the agricultural sector and the manufacturing sector. Based on MRP analysis also showed that prominent sector growth at the level of Bungo and Jambi Province, namely electricity, gas and water supply; the building sector; and trade, hotels and restaurants. Keywords : Location Quotient (LQ, Dinamic Location Quotient (DLQ, Specialization Index, Growth Ratio Model   Abstrak. Penelitian ini bertujuan untuk menganalisis sektor unggulan di Kabupaten Bungo. Metode yang digunakan adalah analisis Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan (MRP. Berdasarkan analisis LQ dan DLQ,  hanya ada 2 sektor yang menjadi sektor basis pada saat ini dan pada masa yang akan datang yaitu sektor bangunan dan sektor perdagangan, hotel dan restoran. Berdasarkan analisis Indeks Spesialisasi, di Kabupaten Bungo telah terjadi konsentrasi ekonomi pada sektor pertanian dan sektor industri pengolahan. Berdasarkan analisis MRP juga dapat diketahui bahwa sektor yang menonjol pertumbuhannya pada tingkat Kabupaten Bungo dan Provinsi Jambi yaitu sektor listrik, gas dan air bersih; sektor bangunan; serta sektor perdagangan, hotel dan restoran. Kata Kunci : Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan

Analisis dan Desain BI-Dashboard Monitoring Realisasi Daftar Isian Pelaksanaan Anggaran (DIPA pada Kantor Pelayanan Perbendaharaan Negara (KPPN

Directory of Open Access Journals (Sweden)

Ernestina Rahmanasari

2013-09-01

Full Text Available Transaksi keuangan badan pemerintahan tingkat daerah dipertanggungjawabkan kepada Kementrian Keuangan melalui Kantor Pelayanan Perbendaharaan Negara (KPPNsetiap bulan dalam bentuk Laporan Keuangan Pemerintah Pusat (LKPP. Laporan Keuangan, didukung dengan teknologi Business Intelligence(BI dashboarddapat dimanfaatkan sebagai data-driven decision support system yang mendorong performa kinerja. Analisis dan desainterhadap pembuatan BI dashboard menunjukkanbagaimana Laporan Keuangan dapat digunakan untuk monitoring realisasi penyerapan dana DIPA dan kinerja instansi secara tepat waktu dan interaktif.Analisis terdiri dari analisis Indikator Kinerja Utama (IKU dan analisis Laporan Keuangan. IKUpada analisis dan desain ini mencakup ketercapaian estimasi dengan penerimaan, ketercapaian pagu dengan belanja, ketepatan waktu pengiriman rekonsiliasi oleh instansi, validasi, akurasi, dan ketepatan data. Desain terdiri dari katalog dashboard, alur analisis, sumber data, desain User-Interface, dan desain objek dashboard. Sedangkan dashboard yang dirancang menggunakan aplikasi Vera sebagai Enterprise System, mengakses basis data MySQL, dan menampilkan data dengan teknologi data-driven business-intelligence Qlikview. Desain aplikasi yang telah dibuat akan menampilkan 4 (empat Tab yaitu: Dashboard utama, Analisis, Monitoring, dan Laporan

Semiotika Teks: Sebuah Pendekatan Analisis Teks

Directory of Open Access Journals (Sweden)

Yasraf Amir Piliang

2004-12-01

tanda-tanda yang membentuk apa yang disebut sebagai ‘teks’. Analisis teks, menurut Roland Barthes, akan menghasilkan makna denotatif, yakni makna tanda yang bersifat eksplisit, dan makna konotatif, yaitu makna tanda lapis kedua yang bersifat implisit.

Microfinanza: analisi d’impatto di un programma in India

Directory of Open Access Journals (Sweden)

Tommaso Rondinella

2005-03-01

Full Text Available L’analisi d’impatto dei programmi di microfinanza è uno strumento utile sia per migliorare i servizi offerti sia per garantire ai donatori che il denaro concesso sia utilizzato per programmi efficaci nell’alleviare la povertà. Il presente lavoro è costituito da due parti: la prima è dedicata all’analisi d’impatto, la seconda all’analisi empirica sul campo. L’indagine è stata condotta attraverso l’utilizzo di uno strumento in grado di dare una indicazione chiara dei cambiamenti avvenuti nelle condizioni di vita dei beneficiari e con il pregio di essere applicabile a costi molto ridotti. I risultati ottenuti mostrano in che misura l’accesso al credito cambi le condizioni di vita dei più poveri inducendo consistenti aumenti del reddito familiare, dei risparmi, della diversificazione delle attività produttive e del consumo di cibo. Inoltre si osserva, all’interno dei nuclei familiari, un miglioramento della condizione femminile chiaramente dipendente dalla partecipazione al programma di microcredito

ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN

OpenAIRE

ARIANTY, ASTRI

2012-01-01

ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN COMPANY FINANCIAL PERFORMANCE ANALYSIS PT. INSURANCE JIWASRAYA (LIMITED) SOUTH BRANCH SULAWESI Astri Arianty Prof. Dr. H. Muhammad Ali, SE., M.S Drs. Armayah Sida, M.Si Analisis terhadap kinerja keuangan perusahaan sangat penting dilakukan untuk mengetahui sejauh mana tingkat pencapaian yang telah diperoleh perusahaan sebagaimana tujuan perusahaan dalam menjalankan proses produk...

Perumusan Strategi Bersaing pada Perusahaan Ban dengan Metode Analisis Portofolio Produk (Studi Kasus: PT Multistrada Arah Sarana, Tbk

Directory of Open Access Journals (Sweden)

Nathanael August Zefanya

2017-01-01

Full Text Available Industri ban di Indonesia mengalami perkembangan pesat dalam kurun waktu 10 tahun terakhir. Namun, terjadinya krisis ekonomi global menjadi penyebab menurunnya pendapatan, salah satunya adalah PT MASA dengan produk utamanya yaitu ban mobil Achilles dan ban motor Corsa yang digunakan sebagai objek penelitian ini. Telah diilakukan analisis PESTEL dan Porter’s Five Forces, identifikasi faktor lingkungan internal dan eksternal dengan analisis SWOT serta merumuskan alternatif strategi bersaing untuk direkomendasikan kepada PT MASA. Perumusan strategi alternatif didapat dari hasil analisis Matriks BCG dan Matriks IE sebagai analisis portofolio untuk mendapatkan tema strategi alternatif dalam pembuatan Matriks SWOT. Strategi alternatif kemudian diperingkatkan dengan QSPM dan dilanjutkan pembuatan rencana aksi bagi PT MASA dalam waktu 5 tahun ke depan. Setelah dilakukan analisis industri, diketahui bahwa ancaman terbesar datang dari pesaing produsen ban. Dari hasil analisis portofolio, PT MASA berada di kuadran I karena memiliki koordinat IFE serta EFE 3,32 dan 3,26. Dari hasil analisis Matriks IE, PT MASA direkomendasikan untuk melakukan strategi grow and build. Hasil Matriks BCG menunjukkan bahwa Achilles berada di dogs, sementara Corsa berada di question marks. Terdapat 13 strategi alternatif hasil dari formulasi strategi dengan menggunakan matriks TOWS. Dari hasil analisis QSPM, terdapat 7 alternatif strategi terbaik dan rencana aksi..

ANALISIS ATRIBUT-ATRIBUT YANG MEMPENGARUHI TINGKAT KEPUASAN PELANGGAN TELEPON RUMAH (FIXED WIRELINE MENGGUNAKAN METODE ANALISIS DISKRIMINAN (STUDI KASUS DI PT. TELKOM KANDATEL SEMARANG

Directory of Open Access Journals (Sweden)

Diana Puspita Sari

2012-02-01

Full Text Available PT Telkom memiliki misi untuk memberikan layanan One Stop Infocom dengan kualitas prima dan harga kompetitif. Kenyataannya, PT. Telkom Kandatel Semarang mengalami penurunan pendapatan. Semakin berkembangnya layanan jasa fixed wireless yang lebih mudah dan murah, menyebabkan penurunan pemakaian jasa fixed wireline. Dengan konsumen melakukan pembelian pertama pada suatu produk tertentu dengan harga terjangkau, kualitas terjamin, maka konsumen akan kembali membeli produk tersebut, dan dampaknya dari fenomena ini adalah kepuasan pelanggan (customer satisfaction terhadap produk tertentu karena telah memberikan kepuasan dan terjaminnya kualitas, walaupun banyak pesaing lain.  Oleh sebab itu, penelitian ini membahas dan melakukan analisis kepuasan pelanggan fixed wireline PT. Telkom Kandatel Semarang, menggunakan variabel kepuasan pelanggan untuk dikelompokkan menjadi tiga tingkatan yaitu pelanggan yang sangat puas, puas, dan tidak puas dengan menggunakan analisis klaster, kemudian dilakukan analisis variabel 4P Customer Relationship Management (CRM menggunakan analisis diskriminan, sehingga diketahui atribut yang mempengaruhi tingkat kepuasan pelanggan agar PT. Telkom Kandatel Semarang dapat terus mempertahankan dan meningkatkan kepuasan pelanggan dengan berusaha memenuhi kebutuhan dan keinginan pelanggan dengan maksud kepuasan pelanggan tidak menurun agar dapat meningkatkan intensitas pemakaian fixed wireline. Kata kunci : analisis klaster, analisis diskriminan, kepuasan pelanggan, fixed wireline      PT Telkom has a mission to provide a One Stop Infocom services with excellent quality and competitive price. In fact, PT. Telkom Semarang Kandatel income decreased. The growing fixed wireless service is easier and cheaper, causes a decrease in the use of fixed wireline services.With the first consumer purchase a given product at an affordable price, guaranteed quality, then consumers will buy the product again, and the impact of this phenomenon is

Pembuatan Dan Analisis Exciter Generator Rf Untuk Siklotron Proton Decy-13

OpenAIRE

Prajitno, Prajitno

2011-01-01

PEMBUATAN DAN ANALISIS EXCITER GENERATOR RF UNTUK SIKLOTRON PROTON DECY-13.Telah dilakukan analisis dan pembuatan exciter generator RF untuk siklotron proton 13MeV. Generator RFakan digunakan sebagai sumber tegangan pemercepat bolak-Balik siklotron DECY-13 rancangan PTAPBBATAN.Berdasarkan dokumen rancangan dasar yang telah dibuat siklotron Decy-13 akan menggunakanmedan magnet 1,275 Tesla, sehingga frekuensi generator RF bila menggunakan harmonik keempat adalah77,667 MHz. Salah satu teknik pem...

Analisis Aliran Daya Berbasis Injeksi Arus dalam Bentuk Vektor

Directory of Open Access Journals (Sweden)

Ahmad Wira Satriawan

2017-11-01

Full Text Available Tulisan ini memaparkan hasil penelitian yang telah dilakukan untuk membandingkan metode analisis aliran daya berbasis injeksi arus dalam bentuk vektor dengan format polar dan rektangular. Penelitian ini dilakukan untuk memperoleh metode analisa aliran daya dengan perhitungan yang lebih cepat dan akurat, serta iterasi yang lebih sedikit. Metode iterasi Newton Raphson diadopsi dalam penelitian ini dan bahasa pemrograman Python serta library komputasinya digunakan. Analisis terhadap karakteristik konvergensi dari kedua format dilakukan pada IEEE 14-bus Test System. Dari penelitian ini diperoleh hasil bahwa format rektangular lebih unggul dibandingkan format polar untuk kasus yang diteliti.

Perancangan Sistem Pemeliharaan Menggunakan Metode Reliability Centered Maintenance (RCM Pada Pulverizer (Studi Kasus: PLTU Paiton Unit 3

Directory of Open Access Journals (Sweden)

RATNA BHAKTI PUSPITA SARI

2017-03-01

Full Text Available PLTU Paiton Unit 3 merupakan perusahaan yang bergerak di bidang produksi listrik menggunakan bahan baku batubara yang terletak di Paiton, Probolinggo. Untuk mencapai target, proses produksi dilakukan 24 jam selama 1 tahun tanpa henti. Program pemeliharaan mesin sangat penting untuk kelancaran proses produksi. Dalam rangka mencapai target tersebut dituntut adanya kelancaran batubara dari silo hingga surface burner menggunakan pulverizer. Data dari Departemen Engineering menunjukkan bahwa beberapa subsistem pulverizer sering mengalami kerusakan yang dapat menimbulkan kegagalan pada sistem tersebut. Penelitian tugas akhir ini menggunakan metode Reliability Centered Maintenance (RCM untuk menurunkan tingkat breakdown mesin dan downtime produksi. Data historis kerusakan pulverizer dianalisa. Kemudian kegagalan dari suatu komponen yang dapat menyebabkan kegagalan fungsi dari sistem diidentifikasi menggunakan metode Failure Mode and Effect Analysis (FMEA. Selanjutnya menggunakan RCM Decision Worksheet untuk mengetahui bagian dari sistem yang gagal dan perlu dilakukan tindakan perbaikan dan pencegahan berdasarkan kegagalan yang ada agar kejadian yang sama tidak terulang dan menentukan kegiatan perancang perawatan yang tepat pada setiap komponen Berdasarkan analisis data secara Reliability Centered Maintenance (RCM terdapat 12 failure mode yang terjadi pada pulverizer. 3 failure mode dapat dicegah dengan scheduled restoration task, 8 failure mode dapat dicegah dengan scheduled discard task, dan 1 failure mode dapat dicegah dengan redesign. Analisis kuantitatif menggunakan distribusi kegagalan dengan perangkat lunak Weibull++6 didapatkan MTBF grinding roller 2880,66 jam, MTBF hydraulic pump 5075,06 jam, MTBF gearbox 5381,65 jam dan MTBF coal feeder 525,17 jam.

ANALISIS CLUSTER K-MEANS DALAM PENGELOMPOKAN KEMAMPUAN MAHASISWA

Directory of Open Access Journals (Sweden)

B. Poerwanto

2016-12-01

Full Text Available Abstract. Cluster Analysis, K-Means Algorithm, Student Classification. This study aims to classify students based on learning outcomes for subject the basic of statistics (DDS, which is measured based on attendance, task, midterm (UTS, and final exams (UAS to further used to evaluate learning for subjects that require analysis of quantitative . This study uses k-means cluster analysis to classify the students into three groups based on learning outcomes. After grouped, there are 3 people in the low category, 27 in the medium category and over 70% in the high category.Abstrak. Analisis Cluster K-Means dalam Pengelompokan Kemampuan Mahasiswa. Pene-litian ini bertujuan untuk mengelompokkan mahasiswa berdasarkan hasil belajar mata kuliah dasar-dasar statistika (DDS yang diukur berdasarkan variabel nilai kehadiran, tugas, ujian tengah semester (UTS, dan ujian akhir semester (UAS untuk selanjutnya digunakan untuk mengevaluasi pembelajaran untuk mata kuliah yang membutuhkan kemampuan analisis kuantititatif yang baik. Penelitian ini menggunakan analisis cluster k-means dalam mengelompokkan mahasiswa ke dalam tiga kelompok berdasarkan hasil belajarnya. Seteleh dikelompokkan, terdapat 3 orang yang masuk pada kategori rendah, 27 orang pada kategori sedang dan lebih dari 70% pada kategori tinggi.Kata Kunci: Cluster Analysis, K-Means Algoritma, Klasifikasi Mahasiswa, Universitas Cokroaminoto Palopo

Klasifikasi Kecamatan Berdasarkan Nilai Akhir SMA/MA di Kabupaten Aceh Selatan Menggunakan Analisis Diskriminan

Directory of Open Access Journals (Sweden)

Fitriana A.R.

2015-11-01

Full Text Available Analisis diskriminan merupakan bagian dari analisis peubah ganda. Analisis diskriminan digunakan untuk memodelkan variabel tak bebas yang bersifat kualitatif dengan variabel bebas yang bersifat kuantitatif. Pada penelitian ini, analisis diskriminan lebih dari dua kelompok diterapkan pada data nilai akhir SMA/MA di Kabupaten Aceh Selatan yang bertujuan untuk mendapatkan model untuk pengklasifikasian kecamatan. Pengklasifikasian ini bertujuan untuk melihat perbedaan kualitas siswa SMA/MA yang berada di masing-masing kecamatan Kabupaten Aceh Selatan berdasarkan data nilai akhir. Variabel tak bebas yang digunakan berupa klasifikasi kecamatan berdasarkan rata-rata jumlah nilai akhir SMA/MA yang berada di masing-masing kecamatan yang dibentuk dengan K-Means Cluster. Sedangkan variabel bebas yang digunakan adalah data rata-rata nilai akhir SMA/MA untuk setiap mata pelajaran yang diujiankan pada masing-masing jurusan setiap kecamatan. Model yang didapatkan adalah dua model diskriminan untuk jurusan IPA dan IPS.

PENGUKURAN KINERJA PERUSAHAAN PT. HADJI KALLA DENGAN MENGGUNAKAN ANALISIS ECONOMIC VALUE ADDED

OpenAIRE

2013-01-01

Tujuan dari penelitian ini adalah mengetahui kinerja Economic Value Added (EVA) yang dicapai oleh perusahaan PT. Hadji Kalla, sedangkan metode analisis yang digunakan dalam penelitian ini adalah analisis perkembangan Economic Value Added (EVA), Net Operating Profit After Tax (NOPAT) dan The purpose of this study was to determine the performance of the Economic Value Added (EVA), which is achieved by the company PT. Hadji Kalla...

ANALISIS HARGA POKOK PRODUKSI DAN PENERAPAN TARGET COSTING PADA UD WAJUKU MAKASSAR

OpenAIRE

-, CHAIDIR HAFID

2017-01-01

ABSTRAK Analisis Harga Pokok Produksi dan Penerapan Target Costing pada UD Wajuku Makassar The Analysis of The Cost of Goods Manufactured and Implementation of Target Costing in UD Wajuku Makassar Chaidir Hafid Asri Usman Syahrir Penelitian ini bertujuan untuk mengetahui perhitungan harga pokok produksi baju kaos polos sebelum dan setelah penerapan metode target costing pada UD Wajuku Makassar. Metode pengumpulan data yang digunakan adalah dokumentasi. Metode analisis dat...

ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-02-01

Full Text Available PT. Coca-Cola Bottling Indonesia (CCBI Central Java merupakan salah satu perusahaan produsen minuman ringan yang terkemuka di Indonesia, dengan dua jenis kelompok produk yang dihasilkan yaitu minuman karbonasi/Carbonated Soft Drink (Coca-Cola, Sprite, dan Fanta dan non-karbonasi (Frestea dan Ades. Dalam usaha untuk mempertahankan mutu dan meningkatkan produktifitas, salah satu faktor yang harus diperhatikan adalah masalah perawatan fasilitas/mesin produksi.  Makalah ini membahas mengenai penyebab dan akibat yang ditimbulkan oleh breakdown mesin terjadi pada Line 8/Carbonated Soft Drink, khususnya pada conveyor, filler machine, dan bottle washer machine. Untuk mendapatkan mesin yang dapat terjaga keterandalannya dibutuhkan suatu konsep yang baik. Total Productive Maintenance (TPM merupakan sebuah konsep yang baik untuk merealisasikan hal tersebut. Konsep ini, selain melibatkan semua personil dalam perusahaan, juga bertujuan untuk merawat semua fasilitas produksi yang dimiliki perusahaan.Data yang digunakan merupakan data breakdown conveyor, filler machine, dan bottle washer machine dari ME Monthly Report PT.CCBI selama bulan Januari-Desember 2005 khususnya line 8. Selain itu makalah ini juga membahas performance maintenance PT. Coca-Cola Bottling Indonesia-Central Java, dengan memperhitungkan nilai Mean Time Beetwen Failure (MTBF, Mean Time To Repair (MTTR, serta Availability mesin, dengan menggunakan data record Line 8 selama bulan Mei 2006 sampai bulan Juli 2006. Sehingga nantinya akan diketahui informasi keadaan aktual dari perusahaan tentang sistem perawatannya, khususnya pada Line 8/Carbonated Soft Drink apakah baik atau buruk. Kata kunci : Total Production Maintenance, Conveyor, Filler Machine, Bottle Washer Machine, Performance Maintenance   PT. Coca-Cola Bottling Indonesia (CCBI-Central Java represent one of notable light beverage producer company in Indonesia, with two product group type yielded is carbonated beverage/Carbonated Soft

Analisis Komoditi Unggulan Subsektor Tanaman Pangan di Sumatera Utara Tahun 2010 – 2014

OpenAIRE

Sinaga, Terry Praganda

2016-01-01

Tujuan penelitian ini adalah untuk mengetahui perkembangan produksi komoditi tanaman pangan selama periode tersebut sehingga dapat menganalisis komoditi subsektor tanaman pangan yang menjadi unggulan di Sumatera Utara. Komoditi unggulan tersebut juga dijabarkan untuk setiap kabupatem/kota yang ada di Sumatera Utara. Metode yang digunakan yaitu secara Convenience Sampling, dan metode analisis data dengan menggunakan analisis Location Quotient. Hasil penelitian menyimpulkan ba...

APLIKASI METODE-METODE AGGLOMERATIVE DALAM ANALISIS KLASTER PADA DATA TINGKAT POLUSI UDARA

Directory of Open Access Journals (Sweden)

Dewi Rachmatin

2014-09-01

Full Text Available ABSTRAK   Analisis Klaster merupakan analisis pengelompokkan data yang mengelompokkan data berdasarkan informasi yang ditemukan pada data. Tujuan dari analisis klaster adalah agar objek-objek di dalam satu kelompok memiliki kesamaan satu sama lain sedangkan dengan objek-objek yang berbeda kelompok memiliki perbedaan. Analisis klaster dibagi menjadi dua metode yaitu metode hirarki dan metode non-hirarki. Metode hirarki dibagi menjadi dua, yaitu metode agglomerative (pemusatan dan metode divisive (penyebaran. Metode-metode yang termasuk dalam metode agglomerative adalah Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method. Pada artikel ini dibahas metode-metode agglomerative tersebut yang diterapkan pada data tingkat polusi udara. Masing-masing metode tersebut memberikan jumlah klaster yang berbeda.   Kata Kunci : Analisis Klaster, Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method.     ABSTRACT Cluster analysis is an analysis of the data classification based on information found in the data.The objective of cluster analysis is that the objects in the group have in common with each other, while the different objects have different groups. Cluster analysis is divided into two methods : the method of non-hierarchical and hierarchical methods.Hierarchical method is divided into two methods, namely agglomerative methods (concentration and divisive methods (deployment. The methods included in the agglomerative method is Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward 's Method, Method and Median Centroid Method. In this article discussed the agglomerative methods were applied to the data rate of air pollution. Each of these methods provides a different number of clusters.   Keywords: Cluster Analysis , Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward

Risk analysis; Analisis de riesgos

Energy Technology Data Exchange (ETDEWEB)

Baron, J H; Nunez McLeod, J; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

1997-07-01

This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field. [Spanish] Este libro contiene una seleccion de trabajos de investigacion realizados dentro del Instituto de Capacitacion Especial y Desarrollo de la Ingenieria Asistida por Computadora en el area del analisis de riesgos, con una orientacion hacia el estudio de incertidumbres y sensibilidad, confiabilidad de software, modelacion de accidentes severos, etc. Este volumen recoge un material de indudable importancia e interes para todos aquellos investigadores y profesionales que desean incursionar en este campo del analisis de riesgos como herramienta para la solucion de problemas frecuentemente encontrados en la ingenieria y las ciencias aplicadas, asi como para los academicos que desean mantenerse al dia, conociendo los nuevos desarrollos y tecnicas que constantemente aparecen en su area.

ANALISIS PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA INDUSTRI KECIL

Directory of Open Access Journals (Sweden)

Sukirman -

2012-03-01

Full Text Available Tujuan penelitian adalah mengidentifikasi, menganalisis praktik pengelolaan lingkungan pada sentra industri kecil dibandingkan best practices dalam upaya meningkatkan kinerja lingkungan di Kabupaten Pati. Kajian difokuskan pada pengelolaan lingkungan secara efektif dengan melibatkan variabel inisiatif lingkungan, keterlibatan karyawan, dan integrasi dengan supplier. Populasinya adalah seluruh perusahaan Industri Kecil di Kabupaten Pati. Sampel berjumlah 97 perusahaan. Teknik sampling menggunakan kluster sampling, dengan sampel pada sentra industri kecil di Kabupaten Pati.  Analisis menggunakan analisis deskriptif dan analisis komparatif. Hasil penelitian menunjukkan praktik pengelolaan lingkungan pada sentra industri kecil di Kabupaten Pati belum dilaksanakan secara optimal. Sementara itu, variabel integrasi supplier berpengaruh langsung terhadap kinerja perusahaan.The purpose of this study is to identify and to analyze an environmental management practice which is compared to the best practices in order to improve environmental performance in the industrial centers in Pati District. This study focuses on managing the environment effectively by involving environmental initiative variables, employee involvement, and integration of suppliers. Population in this study was all small industrial enterprises in Pati regency which has 97 companies as data samples. Data were collected by using cluster sampling techniques, and samples were taken from small industrial centers in the District of Pati. Data were analyzed by using descriptive and comparative methods. Results of this study showed that environmental management practices in small industrial centers had not been implemented optimally. Meanwhile, supplier integration variables influenced directly toward corporate performance.

Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

Directory of Open Access Journals (Sweden)

I Gusti Ayu Made Srinadi

2014-06-01

Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

Directory of Open Access Journals (Sweden)

I Gusti Ayu Made Srinadi

2015-04-01

Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

ANALISIS KELAYAKAN FINANSIAL PROYEK NARROWNECK PRESS AND BLOW UNTUK PROSES PRODUKSIBOTOL MINUMAN BERENERGI DI PT. ABC

Directory of Open Access Journals (Sweden)

Toni MT Munthe

2015-08-01

Full Text Available PT. ABC merupakan salah satu pabrik yang memproduksi botol kemasan kaca. Penelitian ini bertujuan untuk mengetahui layak atau tidaknya rencana investasi pada proyek Narrow Neck Press and Blow secara finansial di PT. ABC pada periode bulan April 2014 hingga bulan Juni 2014. Analisis kelayakan finansial proyek Narrow Neck Press and Blow, menggunakan metode analisis Net Present Value, Internal Rate of Return, Payback Period dan Sensitivity Analysis. Perbedaan antara nilai sekarang dari semua kas masuk dengan nilai sekarang dari semua kas keluar dari suatu proyek atau suatu investasi diperoleh dengan metode NPV, sedangkan untuk mencari tingkat bunga yang menyamakan nilai sekarang dari aliran kas bersih dan investasi diperoleh dengan metode IRR. Metode analisis yang dapat digunakan untuk mengetahui berapa lamakah waktu yang diperlukan untuk menutup dana yang dikeluarkan untuk suatu proyek dapat diperoleh dengan metode Payback Period. Setelah itu, dilakukan pengujian menggunakan sensitivitas analisis untuk mengetahui tingkat sensitivitas untuk tiap-tiap parameter terhadap persentase kenaikan dan penurunan. Dari hasil analisis data diperoleh nilai NPV sebesar Rp. 1.179.728.649.900,06, nilai IRR sebesar 56,36% dan periode pengembalian terletak pada 2 tahun 2 bulan 9 hari. Dengan menggunakan analisis sensitivitas dapat diketahui bahwa proyek ini sangat sensitif terhadap penurunan volume produksi. Berdasarkan hasil perhitungan, titik impas akan dicapai apabila volume produksi 213.403.267 unit per tahun atau 88,92% dari volume produksi awal. Nilai ini menunjukkan bahwa apabila volume produksi pada suatu periode mengalami penurunan lebih dari 11,08% dari volume produksi awal, maka investasi tersebut akan merugikan.

Analisis Industri Ritel Di Indonesia

OpenAIRE

Soliha, Euis

2008-01-01

This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

Analisis Value Chain Di Industri Otomotif

OpenAIRE

Hendri, Hendri

2017-01-01

Penelitian ini untuk menganalisis industri otomotif. Tujuan dari penelitian ini adalah untuk menganalisis dan mengetahui aktivitas dan kondisi internal proses industri manufaktur dengan menggunakan value chain guna masukan dimasa akan datang bagi industri otomotif secara khusus. Value Chain merupakan rantai nilai yang dapat mengetahui kekuatan Perusahaan, keuntungan dan kesuksesan dari rantai aktivitas dalam Perusahaan atau industri manufaktur.Metode analisis menggunakan Statistika Deskript...

The Analisis Sentimen Sosial Media Twitter Dengan Algoritma Machine Learning Menggunakan Software R

Directory of Open Access Journals (Sweden)

Jaka Aulia Pratama

2017-10-01

Full Text Available Media sosial adalah wadah untuk mengungkapkan opini terhadap suatu topik tertentu. Ketersediaan informasi dan opini dari para pengguna media sosial merupakan kumpulan dokumen data berupa teks yang amat sangat besar dan berguna untuk kepentingan penelitian maupun membuat suatu keputusan bagi pihak – pihak tertentu. Text Mining bisa didefinisikan sebagai proses penggalian informasi di mana pengguna berinteraksi dengan kumpulan dokumen dari waktu ke waktu dengan menggunakan suatu alat analisis. Analisis sentimen atau Opinion Mining adalah salah satu studi di bidang komputasi yang berhubungan dengan kasus publik mengenai opini, penilaian, sikap, dan emosi. Penelitian ini akan menggunakan metode Machine Learning pada analisis sentimen pengguna layanan jejaring sosial Twitter terhadap Donald Trump dan Barack Obama dalam 20000 tweets. Nilai akurasi metode Machine Learning yang diperoleh cukup tinggi yaitu 87.52% untuk Data Training dan 87.4% untuk Data Testing.

Uncertainty and sensitivity analysis methodology in a level-I PSA (Probabilistic Safety Assessment); Analisis de incertidumbres y sensibilidad aen un APS (Analisis Probabilistico de Seguridad) nivel-I

Energy Technology Data Exchange (ETDEWEB)

Nunez McLeod, J E; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

1997-07-01

This work presents a methodology for sensitivity and uncertainty analysis, applicable to a probabilistic safety assessment level I. The work contents are: correct association of distributions to parameters, importance and qualification of expert opinions, generations of samples according to sample sizes, and study of the relationships among system variables and system response. A series of statistical-mathematical techniques are recommended along the development of the analysis methodology, as well different graphical visualization for the control of the study. (author) [Spanish] En este trabajo se presenta una metodologia de analisis de sensibilidad e incertidumbres, aplicable a un analisis probabilistico de seguridad (APS) de nivel I. En el cual se plantea: la adecuada asociacion de distribuciones a variables, la importancia y penalizacion de la opinion de expertos, la generacion de muestras y su tamano, y el estudio de las relaciones entre las variables del sistema y la respuesta de este. Ademas durante el desarrollo de la metodologia de analisis se recomiendan una serie de tecnicas estadistico-matematicas y tipos de visualizacion grafica para el control del estudio. (autor)

Analisis Kebijakan dan Efektivitas Organisasi

Directory of Open Access Journals (Sweden)

Amir Syarifudin Kiwang

2015-05-01

Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

Kajian Eksperimental Parameter Modal Bangunan Dua Lantai dengan Metode Modal Analisis

Directory of Open Access Journals (Sweden)

Islahuddin Islahuddin

2016-12-01

Full Text Available Abstrak: Pengukuran getaran merupakan kegiatan yang umum dilakukan dalam perawatan prediktif. Perawatan prediktifbiasanya menggunakan pengukuran sinyal getaran untuk mendeteksi kerusakan yang terjadi pada mesin. Sinyalgetaran yang terukur tersebut, kemudian ditransformasikan dalam bentuk grafik fungsi respon frekuensi (FRF.Selanjutnya FRF diolah sedemikian rupasehingga diperoleh modus getar struktur. Dari modus getar yang diperoleh,maka dapat dianalisa kemungkinan kerusakan yang terjadi pada mesin dengan melihat besarnya amplitudo getarannya.Penelitian ini bertujuan untuk menganalisa karakteristik dinamik dari sistem getaran yang terjadi pada model strukturbangunan dua lantai. Pengujian dilakukan denganmemberikan gaya eksitasi menggunakan impact hammer.Akselerometer digunakan mengukur sinyal getaran yang terjadi pada struktur. Posisi penempatan akselerometerdilakukan bervariasi untuk delapan titik pengujian yang berbeda. Sedangkan posisi pemberian gaya eksitasi tetap untuksemua titik pengujian. Pada penelitian ini menggunakan metode modal analisis eksperimen untuk mengetahuikarakteristik dinamik dari model struktur bangunan dua lantai. Teknik modal analisis ini digunakan untuk mendapatkanparameter modal seperti frekuensi, rasio redaman, dan modus getar. Hasil yang diperoleh dari penelitian inimenunjukkan bahwafrekuensi pribadipertama pada amplitudo maksimum mempunyai nilai yang sama, yaitu 2,313 Hz.Sedangkan untuk frekuensi pribadi kedua pada amplitudo maksimumnya terdapat perbedaan, yaitu pada titik pengujian3 dan 7. Hal ini dapat disebabkan oleh pemberian gaya eksitasi yang tidak sama dengan titik-titik pengujian yang lain.Kata kunci: Karakteristik dinamik, analisis modal eksperimen, frekuensi pribadi, FRF Abstract: Measuring vibration is an activity which is generally carried out in a predictive maintenance. In maintaining, vibratesignal measurement is usually used for machine damage detection. The signal measurement is then being

ANALISIS PERIKANAN HUHATE DI PERAIRAN LARANTUKA, FLORES

Directory of Open Access Journals (Sweden)

Mohamad Adha Akbar

2016-11-01

Full Text Available Informasi mengenai beberapa aspek perikanan huhate sangat diperlukan sebagai bahan untuk perencanaan pengelolaan perikanan yang berkelanjutan. Penelitian ini dilakukan di Larantuka, Flores Timur pada tahun 2014 dengan tujuan untuk menganalisis perikanan huhate sebagai salah satu tulang punggung perikanan TCT. Kegiatan penelitian diprioritaskan pada analisis unit alat tangkap, daerah penangkapan, komposisi hasil tangkapan dan estimasi Total Faktor Produktivitas (TFP perikanan huhate. Basis data pengukuran adalah himpunan  data pendaratan dan observasi lapang. Hasil penelitian menunjukan bahwa karakteristik armada terdiri dari kapal yang terbuat dari fibreglass dengan kisaran bobot kapal 6 - 30 GT. Daerah penangkapan di sekitar perairan Laut Sawu dan Laut Flores. Hasil tangkapan utama didominansi oleh cakalang (Katsuwonus pelamis sebanyak 82%, juwana tuna (Thunnus spp. 17% dan tongkol (Auxis spp. 1% serta hasil tangkapan ikutan lemadang (Coryphaena hippurus dan marlin (Makaira spp. < 1%. Hasil analisis tangkapan per unit upaya (CPUE memberikan nilai rata-rata sebesar 1,1 ton/trip (0,4-1,7 ton/trip dengan nilai tertinggi terjadi pada Februari, sedangkan terendah terjadi pada Januari. Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara tren bulanan CPUE dan nilai TFP.

ANALISIS PENGELOLAAN LINGKUNGAN PERMUKIMAN DI KABUPATEN SOPPENG

Directory of Open Access Journals (Sweden)

Bakhrani Rauf

2016-08-01

Full Text Available Penelitian ini  bertujuan untuk mendeskripsikan pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 penyediaan dan penanganan lahan terbuka hijau (open space; (2 penyediaan dan penanganan drainase; (3  penanganan sampah; (4 penyediaan dan penanganan pembuangan veses (septic tank. Jenis penelitian ini adalah penelitian kuantitatif dengan pendekatan survei.  Sampel wailayah penelitian ini adalah satu RW di ibu kota kabupaten dan satu RW di desa yang dipilih dengan metode purpossive sampling,  yaitu RW yang sudah maju di ibu kota kabupaten dan RW yang tertinggal di desa. Responden sebanyak 50 kepala keluarga yakni masing-masing 25 kepala keuarga di setiap RW, dipilih dengan  systematic random sampling.  Teknik pengumpulan data yang dilakukan adalah melakukan observasi langsung dan dilengkapi dengan wawancara terhadap responden. Analisis yang digunakan adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 ketersediaan dan penanganan lahan terbuka hijau (open space ditemukan belum memadai; (2 ketersediaan drainase (air kotor dan air hujan ditemukan belum memadai; (3 Penanganan sampahbelum memadai; dan (4 penanganan veses dan penyediaan septic tankbelum memadai.

Analisis Perbandingan Material Slab Beton Pada Perkerasan Apron Dengan Menggunakan Program Bantu Elemen Hingga

Directory of Open Access Journals (Sweden)

Hendrawan Setyo Warsito

2016-04-01

Full Text Available Kekuatan slab beton sangat dipengaruhi oleh jenis material yang dipakai. Jenis material yang dimaksud adalah material beton dengan menggunakan PC (Portland Cement dan penggunaan geopolimer dalam komposisi campuran slab beton. Beton geopolimer merupakan beton yang ramah lingkungan. Permasalahan lain yang timbul adalah letak roda pesawat tidak selalu berada pada titik yang sama disuatu permukaan slab beton apron. Pada tugas akhir ini dimaksudkan untuk menganalisis suatu slab beton yang dibebani roda pesawat dengan campuran variasi material beton dan variasi letak roda pesawat pada slab beton dengan program bantu metode elemen hingga. Dengan data pergerakan pesawat, spesifikasi apron bandara Juanda kondisi eksisting. Dilakukan perhitungan tebal slab beton menggunakan software FAARFIELD dan diperoleh tebal slab beton sebesar 442,5 mm. Dari analisis program bantu elemen hingga dapat diperoleh tegangan pada slab beton yang ditimbulkan oleh pembebanan roda pesawat. Hasil validasi dari analisis tegangan menggunakan program bantu elemen hingga dengan analisis Westergaard yaitu memiliki nilai tegangan yang hampir sama pada ketebalan slab beton 450mm. Nilai tegangan tiap-tiap material beton menunjukan nilai tebal slab beton yang diijinkan untuk tipe pesawat tertentu. Dari analisis menggunakan program bantu elemen hingga tebal slab beton yang diijinkan untuk material slab beton PC yaitu sebesar 425mm. Sedangkan untuk material beton geopolimer yaitu sebesar  415 mm.

Analisis Model Penelusuran Backward Chaining dalam Mendeteksi Tingkat Kecanduan Game pada Anak

Directory of Open Access Journals (Sweden)

Anastasya Latubessy

2017-10-01

Full Text Available Game addiction rate can be detected by applying expert system. This study developed a model of game addiction analysis using backward chaining. This model uses six types of game addiction behavior, among others, salience, euphoria, conflict, tolerance, withdrawal, relapse and reinstatement. Someone is said to be addicted to the game if it meets at least three types of game addiction behavior. Testing the validity of the model is done by testing the closeness of the agreement between the model analysis and expert analysis, resulting in a value of 0.78 which means having a strong agreement. Tingkat kecanduan game dapat dideteksi dengan mengaplikasikan sistem pakar. Penelitian ini mengembangkan model analisis tingkat kecanduan game menggunakan backward chaining. Model ini menggunakan enam jenis perilaku kecanduan game antara lain, salience, euphoria, conflict, tolerance, withdrawal, relapse dan reinstatement. Seseorang dikatakan kecanduan game jika memenuhi paling sedikit tiga jenis perilaku kecanduan game. Pengujian validitas model dilakukan dengan menguji keeratan kesepakatan antara analisis model dan analisis pakar, menghasilkan nilai 0,78 yang berarti memiliki keeratan kesepakatan kuat.

Estetika Tari Minang dalam Kesenian Randai Analisis Tekstual-Kontekstual

Directory of Open Access Journals (Sweden)

Sri Rustiyanti

2013-03-01

Full Text Available ABSTRACT   This paper reveals textual and contextual Randai, among other things, an analysis of Gerak Ga­ lombang Randai, an analysis of the character of Anak Randai, and at the end of the study series, to reveal the values contained in Randai as a cultural reality, which in principle is an inseparable part of the existence of Minangkabau community as the cultural support. The variety of motion used in Gerak Galombang Randai is not only a decoration of the motion beauty (tangible, but it also can be translated, as well as a symbol or emblem that has educational meanings (intangible, and can be an example of the daily life of the indigenous Minangkabau society.   Keywords: Minang Dance aesthetic, Randai, textual­contextual analysis     ABSTRAK   Tulisan ini mengungkap teksual dan kontekstual Randai, di antaranya, analisis terhadap gerak galombang Randai, analisis karakter tokoh anak Randai, dan sebagai akhir dari rang- kaian penelitian ini, mengungkapkan nilai-nilai yang terdapat pada Randai sebagai realitas budaya, yang pada prinsipnya merupakan bagian yang tak dapat dipisahkan dari eksistensi masyarakat Minangkabau sebagai penyangga kebudayaan. Ragam gerak yang digunakan dalam gerak galombang Randai itu kiranya tidak hanya sekedar hiasan keindahan gerak be- laka (tangibel, namun ia dapat diterjemahkan, sekaligus merupakan simbol atau lambang yang bermakna  mendidik (intangibel, dan dapat   menjadi teladan dalam kehidupan se- hari-hari dalam masyarakat adat di Minangkabau.   Kata Kunci: estetika Tari Minang, Randai, analisis tekstual-kontekstual

ANALISIS PERBAIKAN SISTEM PENTANAHAN TELEKOMUNIKASI

Directory of Open Access Journals (Sweden)

Umar Umar

2015-04-01

Hasil dari penelitian ini adalah perbaikan sistem pentanahan site Kampung Baru dengan menggunakan konfigurasi single point connection window (SPCW, untuk mengamankan sistem telekomunikasi dari kebocoran arus dan petir serta imbasnya.  Perbaikan sistem pentanahan di site Kampung Baru menggunakan banyak elektroda yang membentuk persegi dikarenakan topografi tempat di sana yang memungkinkan dan efektif adalah menggunakan sistem tersebut. Berdasarkan hasil analisis dan perhitungan perbaikan sistem di site Kampung Baru, didapatkan nilai perhitungan sistem pentanahan adalah 1.34 Ohm serta pengukurannya 1.21-1.25 Ohm.

ANALISIS DAYA SAING KEDELAI INDONESIA

Directory of Open Access Journals (Sweden)

Sarwono Sarwono

2014-09-01

Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

EVALUASI KINERJA KEGIATAN PERAWATAN MESIN INJECTION MOLD MENGGUNAKAN METODE TOTAL PRODUCTIVE MAINTENANCE (TPM PADA PT ICHIKOH INDONESIA

Directory of Open Access Journals (Sweden)

M. Tirtana Siregar

2017-12-01

Full Text Available Penelitian ini bertujuan untuk memberikan gambaran deskriptif mengenai perawatan mesin atau maintenance, meliputi Total Productive Maintenance, Overall Equipment Effectiveness, Overall Human Ineffectiveness dan Six Big Losses pada PT Ichikoh Indonesia. Permasalahan yang terjadi diperusahaan yaitu banyaknya jumlah part defect dikarenakan mesin sering breakdown. Pengumpulan data dilakukan dengan observasi dan wawancara terstruktur dengan Manager Departement Molding Upstream 1 dan Departement Maintenance. Data tersebut dianalisis menggunakan metode kuantitatif dan evaluatif dari periode bulan April 2016 sampai Maret 2017. Dari hasil analisis ini PT Ichikoh Indonesia memiliki nilai efektifitas mesin yang masih dibawah standar JIPM (Japan Institude of Plant Maintenance yaitu dengan nilai tertinggi pada bulan Februari 74%, sedangkan standar JIPM (Japan Institude of Plant Maintenance adalah minimal sebesar 85% yang dihitung menggunakan metode Overall Equipment Effectiveness. Sedangkan untuk pengukuran tingkat ketidakefektifan kerja operator yang dianalisis menggunakan metode Overall Human Ineffectiveness mendapatkan nilai yang masih besar pada bulan May 2016 yaitu sebesar 17%.  Faktor yang menyebabkan rendahnya nilai efektifitas mesin dan tingkat ketidakefektifan kinerja operator adalah faktor Idling and Minor Stoppagges dengan nilai losses sebesar 54% yang sudah dianalisis menggunakan diagram pareto. Sesuai dengan diagram sebab-akibat (fishbone didapat faktor-faktor yang menyebabkan terjadinya Idling and Minor Stoppagges yang menjadi prioritas utama adalah a. faktor manusia yaitu masih kurang disiplin, sering terjadi kesalahan dalam perbaikan mesin, b. faktor material yaitu kesalahan spesifikasi material dan rendahnya perawatan bahan baku, c. faktor mesin yaitu mesin sering breakdown, kesalahan setup, d. faktor metode yaitu penjadwalan pengganti komponen yang belum efektif dan autonomous maintenance kurang berjalan dengan baik, e. faktor lingkungan

Analisis Pengaruh Display Interior Terhadap Perilaku Pembelian Impulsif Konsumen Indomaret Pontianak

Directory of Open Access Journals (Sweden)

Ana Fitriana

2016-07-01

Full Text Available Pembelian impulsif adalah kecenderungan membeli produk atau jasa dengan tidak terencana, selanjutnya ketika pembelian sering tidak terencana, maka umumnya konsumen membeli produk atau jasa yang tidak terdaftar dalam daftar belanja. Sejalan dengan tujuan pemasar, pembelian tidak terencana ini berdampak sangat positif bagi pihak perusahaan. Salah satu perilaku konsumen yang sangat penting adalah perilaku belanja impulsif. Penelitian ini bertujuan untuk mengetahui pengaruh display interior pada Indomaret Pontianak terhadap impulsive buying konsumennya. Metode penelitian yang digunakan adalah penelitian kuantitatif. Populasi penelitian ini adalah konsumen Indomaret Pontianak, sebanyak 100 responden dipilih secara accidental sampling sebagai sampel penelitian. Metode pengumpulan data yang digunakan adalah metode pengumpulan data primer dengan teknik pengumpulan data kuesioner. Teknik analisis data yang digunakan adalah uji validitas dan reliabilitas, analisis koefisien determinasi, analisis regresi berganda dan uji hipotesis.Hasil perhitungan data menggunakan SPSS for windows ver 16 menunjukan secara simultan pengaruh display interior terhadap impulsive buying diketahui berpengaruh sebesar 61,31%. Sedangkan 38,69% dipengaruhi oleh faktor lain yang tidak diteliti didalam penelitian ini. Secara parsial tiga variabel bebas yaitu pengadaan barang, pengelompokan barang, dan penyusunan barang dan pencahayaan mempunyai pengaruh signifikan terhadap Impulsive buying.   Kata kunci — Pengadaan barang, Pengelompokan barang, Penyusunan barang dan pencahayaan, Perilaku Pembelian Impulsif

ANALISIS PERAN SERTA MASYARAKAT DALAM PENGELOLAAN AIR BERSIH (The Analysis of Community Roles in Potable Water Management

Directory of Open Access Journals (Sweden)

Syahrani Syahrani

2004-07-01

Full Text Available ABSTRAK Kondisi air sungai yang terpolusi karena penebangan hutan, penambangan, dan limbah domestik menyebabkan rendahnya kualitas air yang dikonsumsi masyarakat. Pada tahun l996 telah dibentuk Unit Pengelola Air (UPS-AB oleh komunitas di Kumpai Batu untuk membantu pengadaan air bagi masyarakat. Studi ini dilakukan untuk mengkaji kinerja UPS-AB melalui survai lapangan terhadap 160 rumah tangga. Variabel yang dikaji meliputi aktivitas UPS-AB. cara pengelolaannya dan keterlibatan masyarakat dalam pengelolaan air. Data ini kemudian diproses dengan analisa deskriptif dan analisis regresi. Hasil analisis menunjukkan bahwa tingkat partisipasi masyarakat cukup tinggi. Tingginya tingkat partisipasi ini disebabkan karena kebutuhan komunitas yang tinggi akan pelayanan air. Meskipun demikian masyarakat merasakan pentingnya peningkatan pengelolaaut air oleh UPS-AB khususnya dalam hal: peningkatan kualitas air. kontinuitas suplai. sistim pembayaran dan sistim pencatatan.   ABSTRACT Polluted river water due to destructed forest, mining and population settlement have created lower quality of up-stream water that households generally consume. Considering the scarcity of water, in 1996, Potable Water Management Unit (UPS-AB of Kumpai Batu was founded as community association to participate in the potable water preparation, development and maintenance. This study was conducted through a field survey on 160 households selected using random sampling method. The variable studied were the availability of UPS-AB, involvement indecision making, involvement in activity, involvement in evaluation and social economic condition of village community. Data were processed using descriptive an regression analysis. The result showed that availability of UPS-AB involvement in decision making, involvement in activities, involvement in evaluation and social-economic condition of village community positively affected community participation in potable water management.

Analisis Reduksi Intensitas Cahaya Pada Smartphones’ Screen Protector Dan Dampaknya Pada Mata

Directory of Open Access Journals (Sweden)

Bhekti Kumorowati

2017-04-01

Full Text Available Analisis reduksi intensitas cahaya yang melewati screen protector dan identifikasi kemampuan screen protector sebagai pelindung mata dilakukan dengan mengukur reduksi intensitas cahaya menggunakan luxmeter, kemudian menetapkan fokus bahasan yang mencakup kemampuan cahaya menembus screen protector dan analisis fisis screen protector sebagai pelindung mata. Peran sebagai pelindung mata dikaji melalui pendekatan peristiwa polarisasi yaitu proses terserapnya sebagian arah getar cahaya. Dihasilkan sebagian arah getar cahaya layar smartphone sebelum masuk ke mata akan terserap oleh screen protector sehingga dapat memperlambat terjadinya degenerasi makula. Rekomendasi pemilihan screen protector bergantung pada besarnya koefisien atenuasi (koefisien penyerapan yang dimiliki masing-masing screen protector. Koefisien atenuasi terbesar dimiliki oleh screen protector jenis anti spy.

Analisis Termal High Pressure Feedwater Heater di PLTU PT. XYZ

Directory of Open Access Journals (Sweden)

Maria Ulfa Damayanti

2017-01-01

Full Text Available Abstrak- PT. XYZ mengoperasikan tiga unit Pembangkit Listrik Tenaga Uap (PLTU unit 3, 7 dan 8 berkapasitas 2.030 MegaWatt. Pada PLTU Paiton unit 7 dan 8 terdapat delapan buah feedwater heater yaitu empat buah Low Pressure Water Heater (LPWH, tiga buah High Pressure Water Heater (HPWH, dan sebuah dearator. Pada PLTU Paiton unit 7 dan 8 terdapat kerusakan pada HPWH 6 yang menyebabkan penurunan efisiensi dari siklus secara keseluruhan. Penurunan efisiensi dapat terjadi karena temperatur feedwater sebelum masuk ke boiler terlalu rendah, sehingga kalor yang dibutuhkan oleh boiler untuk memanaskan feedwater meningkat. Oleh karena itu konsumsi batubara akan meningkat dan menyebabkan terjadi kenaikan biaya operasional harian dalam sistem pembangkit. Dari data Divisi Produksi PT. XYZ Unit 7 dan 8 diperoleh spesifikasi HPWH 6, 7, dan 8 dan propertis fluida dalam HPWH 6, 7, dan 8. Data tersebut digunakan sebagai dasar analisis termal yang meliputi performa masing-masing HPH. Tahap selanjutnya dalam analisis termal adalah memvariasikan beban 25%, 50%, 75%, 100%, dan 105%. Tahap terakhir analisis adalah menghitung performa dengan variasi sumbatan (plug 5%, 10%, 15%, dan 20% sesuai dengan variasi beban. Hasil yang didapatkan dari penelitian tugas akhir ini adalah nilai effectiveness tertinggi tercapai pada pembebanan 100% serta menghasilkan pressure drop tertinggi pada pembebanan 105%, nilai effectiveness terbesar serta nilai pressure drop terkecil terjadi pada zona Condensing, serta sumbatan (plugging pada HPH akan menyebabkan penurunan nilai effectiveness dan kenaikan pressure drop sisi tube.

Analisis Kinerja Local Area Network Menggunakan Router.

OpenAIRE

Hutahaean, Yosua

2012-01-01

Perangkat internetworking menawarkan komunikasi di antara segmen Local Area Network (LAN). Ada empat tipe utama perangkat internetworking ini: repeater, bridge, router, dan gateway. Perangkat ini dibedakan atas dasar system lapisan Open System Interconnection (OSI) yang digunakan, berfungsi sebagai media komunikasi dari LAN ke LAN. Pada Tugas Akhir ini penulis tertarik untuk membahas analisis kinerja Local Area Network (LAN) menggunakan Router yang menggunakan sistem antrian M/M/1 dimana j...

Analisis Penerimaan PAD Pada Dinas Perikanan dan Peternakan Kabupaten Tebo

Directory of Open Access Journals (Sweden)

Eko Purnarianto

2016-06-01

Full Text Available Abstract. This study aims to analyze potential, efficiency, effectivity and contribution of PAD admission at Department of Fishery and Animal Husbandry in Tebo Regencyincluding the strategy establishment to increase its revenue.The analysis used is a potential formula, efficiency ratio, effectivity ratio, contributions ratio and SWOT analysis.The results shows that the potential revenue of retribution slaughterhouse (RPH, the potential sales of livestock, and potential sales fishery product are beyond the current target. The efficiency level of retribution slaughterhouse (RPH and sales of fishery product is poor, but the sales of livestock is very efficient. Effectivity level of livestock and fishery product sales are low, whileretribution slaughterhouses(RPH is not effective regarded to its potential  but in the contrary for its target. Contribution of PAD admission of Fishery and Animal Husbandry Department is very low regarded Tebo Regency PAD. The result of SWOT analysis of retribution slaughter house (RPH admission using WO (Weakness-Opportunity strategy, livestock sales using SO (Strength-Oppurtunity strategy, and fishery product sales using ST (strength-threat strategy. Keywords: Retribution SlaughterHouse (RPH, Sales of Fishery, Livestock Sales, SWOT Analysis   Abstrak. Penelitian ini bertujuan untuk menganalisis potensi, efisiensi, efektivitas dan kontribusi penerimaan PAD pada Dinas Perikanan dan Peternakan Kabupaten Teboserta menetapkan strategi untuk peningkatan penerimaan PAD. Analisis yang digunakan adalah rumus potensi, rasio efisiensi, rasio efektivitas, rasio kontribusi dan analisis SWOT.Hasil penelitian menunjukkan bahwa potensi penerimaan retribusi rumah potong hewan (RPH, potensi penjualan hasil peternakan, potensi  penjualan hasil perikanan lebih besar dari target yang telah ditetapkan. Tingkat efisiensi retribusi RPH dan penjualan hasil perikanan tidak efisien, penjualan hasil peternakan sangat efisien. Tingkat

Perbandingan Penilaian Saham Dengan Metode Analisis Fundamental Dan Analisis Tehknical, Penggorengan Saham, Serta Keputusan Penilaian Saham Jika Hasil Berlawanan Arah Untuk Kedua Metode Analisis Pada Saham Bakrie Group Untuk Periode 2005- 2009

OpenAIRE

Harwaningrum, Miranti

2016-01-01

Beberapa tahun belakangan ini, dunia investasi mengalami peningkatan. Hal ini dapat terlihat dari data rata-rata perdagangan saham yang dimiliki oleh Bapepam. Salah satu jenis instrumen investasi yang sering diminati oleh investor adalah saham. Apabila dibandingkan dengan obligasi, saham memiliki expected return yang lebih tinggi. Namun, saham memiliki resiko yang lebih tinggi bila dibandingkan dengan obligasi. Untuk melakukan penilaian saham ada dua analisis yang dapat dilakukan, yaitu funda...

ANALISIS MODEL PREDIKSI AWAL MUSIM HUJAN DI SULAWESI SELATAN

Directory of Open Access Journals (Sweden)

Alimatul Rahim

2016-03-01

Full Text Available Model prediksi awal musim hujan merupakan salah satu kunci yang dapat digunakan untuk mengurangi resiko kegagalan panen padi yang disebabkan oleh faktor iklim di provinsi Sulawesi Selatan. Model prediksi awal musim hujan dibangun  dengan menggunakan data curah hujan observasi Sulawesi Selatan dan anomali suhu muka laut di kawasan Pasifik dan perairan Sulawesi. Pada studi ini dilakukan analisis pemilihan stasiun hujan observasi, penentuan awal musim hujan, analisis komponen utama dan pengelompokan, analisis korelasi awal musim hujan terhadap anomali suhu muka laut, pembangunan model untuk prediksi awal musimhujan dan verifikasi model.Hasil analisis awal musim hujan menunjukkan setiap stasiun hujan mempunyai perbedaan awal musim hujan dengan rata-rata jatuh pada Julian Date (JD ke-348 (14 Desember. Berdasarkan hasil analisis PCA dan cluster, diperoleh bahwa di Sulawesi Selatan terbagi menjadi 3 cluster wilayah. Cluster 1 mempunyai pola hujan lokal, sedangkan cluster 2 dan 3 mempunyai pola hujan monsun. Pada peta korelasi antara awal musim hujan di Sulawesi Selatan dan anomali suhu muka laut menunjukkan bahwa terdapat korelasi nyata(r≥0.5 antara kawasan Pasifik dan Laut Sulawesi pada cluster 1 dan 2 pada bulan Juni Juli Agustus September(JJAS. Sedangkan pada cluster 3, korelasi nyata hanya pada bulan Juni di perairan Sulawesi. Model prediksi AMH terbaik, pada cluster 2 terdapat di domain prediktor kawasan pasifik dengan nilai r=0.82, sedangkan pada cluster 1 dan 3, terdapat di domain perairan Sulawesi dengan nilai r=0.78 dan r-0.48. Verifikasi model terpilih pada cluster 3 mempunyai RMSE = 3, sedangkan cluster 1 dan 2, nilai RMSE berturut-turut sebesar 16 dan 29.   Model prediction of rainy season onset is one of the keys to reduce the risk of paddy haverst failure because of climate factor in South Sulawesi province. The model prediction for rainy season onset was build using rainfall data in South Sulawesi and SST anomaly in Pacific Ocean and

La financial education nella regione Puglia: analisi e prospettive di intervento

OpenAIRE

A. Garzoni; V. Nastasi

2010-01-01

Analisi del contesto e delle principali tematiche di financial education affrontate a livello internazionale e nazionale, valutazione delle opportunità e degli aspetti critici, il progetto pilota nella regione Puglia e le nuove idee di progetto da realizzare

Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

Directory of Open Access Journals (Sweden)

Setyo Budi

2017-02-01

Full Text Available Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil penelitian menunjukkan bahwa akurasi K-Means dengan dataset digunakan 300 positif dan 300 negatif  akurasinya 57.83%,  700 dokumen positif dan 700  negatif akurasinya 56.71%%, 1000 dokumen positif dan 1000  negatif akurasinya 50.40%%. Dari hasil pengujian disimpulkan bahwa semakin besar dataset yang digunakan semakin rendah akurasi K-Means.   Kata Kunci : Text Mining, Analisis Sentimen, K-Means, Review Film 

Analisis Nilai Perusahaan pada Implementasi Program Kepemilikan Saham pada Karyawan/Manajemen

Directory of Open Access Journals (Sweden)

Dwitya Aribawa

2016-12-01

  Penelitian ini bertujuan menganalisis economic value added (EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/ manajemen dengan objek penelitian ini adalah perusahaan publik yang menggunakan kebijakan ESOP/MSOP sebagai sarana benefit/incentive berupa pembagian sebagian saham untuk karyawan/ manajemen. Variabel yang digunakan sebagai indikator nilai perusahaan adalah EVA. Nilai EVA dianggap sebagai indikator yang kompleks dan mempertimbangkan faktor resiko (beta dari perusahaan. Perusahaan yang dianalisis adalah perusahaan yang listing di Bursa Efek Indonesia. Terdapat 17 perusahaan yang layak untuk dilakukan analisis berdasarkan kriteria yang ditentukan peneliti. Pengumpulan dan data dianalisis secara pooling, hal ini melihat dari tidak dibedakannya perusahaan berdasarkan industri (multi industri. Paired sample test digunakan untuk menguji hipotesis pada penelitian dan sebelumnya dilakukan uji normalitas data. Hasil analisis bahwa hasil perbandingan rata-rata EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/manajemen terdapat perbedaan yag signifikan.

PENGGUNAAN METODE STRUCTURAL EQUATION MODELLING UNTUK ANALISIS FAKTOR YANG MEMPENGARUHI MOTIVASI BELAJAR MAHASISWA FIP UMJ

Directory of Open Access Journals (Sweden)

Ririn Widiyasari

2018-02-01

Full Text Available Tujuan yang ingin dicapai dalam penelitian ini adalah mengetahui faktor apa saja  yang mempengaruhi motivasi belajar mahasiswa, apakah terdapat pengaruh yang signifikan antara cara belajar, fasilitas belajar dan lingkungan belajar terhadap motivasi belajar mahasiswa, serta faktor mana yang paling berpengaruh terhadap motivasi belajar mahasiswa. Jumlah sampel dalam penelitian ini adalah 192 mahasiswa (FIP UMJ angkatan tahun 2013-2015 yang aktif mengikuti perkuliahan. Metode penelitian yang dilakukan adalah metode kuantitatif survey. Metode pengambilan data menggunakan  kuesioner dengan skala likert. Metode analisis data yang digunakan adalah analisis deskriptif, dan analisis  Structural Equation Modeling (SEM berbantuan program LISREL 8.3. Uji hipotesis yang digunakan dalam penelitian ini adalah uji Chi-square dan uji t. Hasil penelitian menunjukkan bahwa variabel cara belajar memiliki kontribusi yang paling besar, selanjutnya variabel kedua yang berkontribusi meningkatkan motivasi belajar adalah lingkungan belajar dan terakhir fasilitas belajar memberikan pengaruh yang paling kecil terhadap motivasi belajar. Jadi, variabel laten cara belajar dan lingkungan belajar berpengaruh positif terhadap motivasi belajar dan fasilitas belajar berpengaruh negatif terhadap motivasi belajar.

ANALISIS IMPOR BERAS DI INDONESIA

Directory of Open Access Journals (Sweden)

Ratih Kumala Sari

2014-10-01

Full Text Available Abstrak ___________________________________________________________________ Salah satu kebijakan pemerintah untuk memenuhi kebutuhan beras yaitu dengan menggenjot produksi beras dalam negeri. Namun dengan semakin meningkatnya jumlah penduduk akan meningkatkan permintaan terhadap beras dan upaya peningkatan produktivitas dalam negeri tidak dapat memenuhi kebutuhan beras dalam negeri. Sehingga untuk menutupi kekurangan tersebut pemerintah mengambil keputusan untuk melakukan impor beras dari negara lain. Akan tetapi pada kenyataannya impor beras dilakukan ketika data statistik menunjukkan bahwa Indonesia sedang mengalami surplus beras. Penelitian ini bertujuan untuk mengetahui faktor-faktor apa saja yang mempengaruhi impor beras di Indonesia. Metode analisis yang digunakan adalah analisis regresi linier berganda dengan model Error Correction Model (ECM. Berdasarkan hasil penelitian disimpulkan bahwa secara parsial maupun secara bersama-sama produksi beras, konsumsi beras, harga beras dalam negeri dan nilai tukar rupiah terhadap dollar AS berpengaruh dan signifikan terhadap impor beras di Indonesia. Abstract ___________________________________________________________________ One of the government’s policy to fulfill the need of rice is to boost the domestic production. However, by increasing the population, the demand of rice will also increase and the effort of increasing the domestic productivity cannot supply domestic rice need. So, to cover the shortage the government make decision to import rice from other countries. Yet, in fact importing rice is occurred when the statistical data showed that the supply of rice in Indonesia is surplus. The purpose of this research is necessary to study the factors which influence the import of rice in Indonesia. The analysis method used is multiple linear regression analysis model with Error Correction Model (ECM. Based on the research proven that partially or jointly the production, the consumption, the

ANALISIS LITERASI EKONOMI

Directory of Open Access Journals (Sweden)

Peter Garlans Sina

2012-10-01

Full Text Available Abstract: Analysis of Economic Literacy. The aim of this research is as an effort to increase economic literacy for individuals and households who want to achieve prosperity. Therefore, the obligation of improving the economic literacy needs to be done in a well-planned manner and come from the strong intention to learn in order to improve the economic literacy. It could have an effect on the assets accumulation, a better debt management, as a protection, as well as to increase savings and managing spending intelligently.   Keyword: economic literacy, asset, debt, protection, saving, spending   Abstrak: Analisis Literasi Ekonomi. Tulisan ini bertujuan sebagai upaya meningkatkan literasi ekonomi bagi individu maupun rumah tangga yang menginginkan mencapai kesejahteraan. Oleh karena itu, kewajiban meningkatkan literasi ekonomi perlu dilakukan secara terencana dan diawali dari niat untuk belajar meningkatkan literasi ekonomi karena dapat berefek pada akumulasi aset, pengelolaan utang yang tepat, proteksi, meningkatkan tabungan dan cerdas mengelola pengeluaran.   Kata kunci: literasi ekonomi, aset, utang, proteksi, menabung, pengeluaran

Application of monitoring techniques of operational parameters for the implementation of preventive and predictive maintenance programs to gas turbines; Aplicacion de tecnicas de monitoreo de parametros operacionales para la implantacion de programas de mantenimiento predictivo y preventivo en turbinas de gas

Energy Technology Data Exchange (ETDEWEB)

Gutierrez Villareal, Julio Cesar

1998-12-31

This thesis was made with the purpose to implement a preventive and predictive maintenance program, based on the monitoring parameters techniques that will let us systematize, document and conduct the maintenance activity. The methodology of maintenance describes in this document it has been applied to a gas turbine in the Terminal Maritima Dos Bocas Tabasco, Mexico. Preventive maintenance is based on the periodic inspections of the equipment, the inspection is carried out with a check list in which the idea is to detect problems that will bring an equipment to fail and to repair or adjustment them so as prevent the failure. Nevertheless the possibility that the inspected equipment may be in perfect operating conditions and during conditions and during the inspections the operator might have caused a new damage or problem that will delay the start up. Predictive maintenance is based on techniques that will allow the detection and identification of incipient failures of the equipment. The recommended techniques in this thesis are: Vibration analysis; Non destructive testing and Boroscopy inspection. The contents of each chapter in this thesis is the following: Chapter one describes maintenance programs and strategies, their advantage and disadvantage when there are applied to the continuos operation industries. The procedure and design of maintenance program is presented. Chapter two describe how to manage the resource and materials of maintenance, the inspections techniques applied to the gas turbines, and last but not least; check list for inspections were design as preventive maintenance tools. The following chapter describe the techniques for the predictive maintenance: Chapter three describes some of the capabilities of the vibrations analysis and show the metodology applied for the identifications of the source of vibrations and diagnostic techniques. Chapter four describes some of the techniques for nondestructive test than can be used in gas turbine

Un approccio innovativo per l’analisi quantitativa delle superfici di frattura a fatica nelle ghise sferoidali mediante elaborazione di immagini

Directory of Open Access Journals (Sweden)

O. Di Bartolomeo

2008-07-01

Full Text Available Le osservazioni al microscopio elettronico a scansione (SEM delle superfici di frattura ottenute a seguito di rotture per fatica consentono di evidenziare alcuni meccanismi di avanzamento che dipendono dal materiale e dalla modalità di applicazione delle sollecitazioni. L’introduzione di moderne tecniche di analisi di immagine assistite al calcolatore permette di elaborare un numero di informazioni elevato che consente di porre in relazione le caratteristiche morfologiche locali con il comportamento meccanico macroscopico del materiale.In questo lavoro è stata implementata una tecnica innovativa di analisi di immagine basata sull’analisi della tessitura, valutando l’influenza delle condizioni di applicazione della sollecitazione (ΔK applicato sulla evoluzione del clivaggio rilevato sulle superfici di frattura a fatica di una ghisa sferoidale ferrito-perlitica.

Analisis Rugi Daya Pada Penyulang Bangli Dengan Beroperasinya PLTS Kayubihi

Directory of Open Access Journals (Sweden)

I GN Dion Adiputra

2015-06-01

Full Text Available Analisis rugi daya pada Penyulang Bangli dilakukan untuk mengetahui perbanding an rugi daya pada jaringan distribusi setelah penempatan pembangkit tersebar jenis PLTS berkapasitas 1 MWp. Lokasi penempatan PLTS ditentukan berdasarkan analisis sensitivitas bus. Nilai sensitivitas bus(?didapat dengan cara membandingkan nilai rugi daya pada sistem dengan total beban yang terhubung pada bus. Penelitian ini menggunakan simulasi aliran daya dengan metode aliran daya Newton-Raphson. Hasil penelitian menunjukkan bus TK 0041 memiliki sensitivitas terbesar dengan nilai ?= 0,178. Dari hasil simulasi aliran daya, penempatan PLTS 1MWp pada lokasi alternatif 1 menghasilkan rugi daya minimum pada Penyulang Bangli yaitu 103,1 kW atau 3,3% dari total suplai daya 3071 kW. Pemasangan PLTS dapat menurunkan rugi daya pada Penyulang Bangli sebesar 57 kW dari total rugi daya pada kondisi tanpa PLTS yaitu 160,1 kW. Bila dibandingkan dengan kondisi eksisting, penem patan PLTS pada lokasi alternatif 1 memiliki selisih rugi daya 7,3 kW lebih kecil dari total rugi daya yang dihasilkan kondisi eksisting sebesar 110,4kW.

ANALISIS TINGKAT KAPABILITAS SISTEM INFORMASI RUMAH SAKIT BERDASARKAN COBIT 5 (MEA01 PADA RSUD TUGUREJO SEMARANG

Directory of Open Access Journals (Sweden)

Ariel Bagus Nugroho

2015-11-01

Full Text Available RSUD Tugurejo Semarang merupakan Rumah Sakit kelas B milik pemerintah Provinsi Jawa Tengah yang menyediakan pelayanan jasa untuk masyarakat. Dalam manajemen pengolahan data, RSUD Tugurejo Semarang telah menggunakan sistem informasi rumah sakit. Untuk mengetahui apakah sistem informasi telah berjalan seperti yang diharapkan, maka perlu dilakukan analisis tatakelola teknologi informasi. Pada penelitian ini analisis tatakelola teknologi informasi berfokus pada proses pengawasan, evaluasi dan penilaian kinerja, dan kesesuaian kinerja teknologi informasi, yaitu domain MEA01 pada framework COBIT 5.Tujuan penelitian ini untuk mengetahui tingkat kapabilitas dan strategi perbaikan untuk proses pengawasan, evaluasi dan penilaian kinerja dan kesesuaian TI. Metode pengumpulan  data penelitian ini dengan menggunakan studi dokumen, kuesioner dan wawancara kemudian dianalisis tingkat kapabilitas dan kesenjangan. Tingkat kapabilitas yang didapat dari hasil penelitian yaitu berada level 2 (managed. Untuk menaikkan tingkat kapabilitas pada level 3 maka maka perlu dilakukan secara bertahap strategi perbaikan pada PA 2.1, PA2.2, PA 3.1, dan 3.2. Kata kunci: Analisis Tata Kelola TI, COBIT 5, MEA01, Tingkat Kapabilitas, Rumah Sakit.

KONDISI CURAH HUJAN PADA KEJADIAN BANJIR JAKARTA DAN ANALISIS KONDISI UDARA ATAS WILAYAH JAKARTA BULAN JANUARI – FEBRUARI 2013

OpenAIRE

Syaifullah, M. Djazim

2018-01-01

IntisariKondisi curah hujan di wilayah Jakarta pada kejadian banjir besar tanggal 17 Januari 2013 telah dianalisis yang dihubungkan dengan kondisi atmosfer pada selang waktu tersebut. Data curah hujan menggunakan data TRMM sedangkan analisis kondisi atmosfer menggunakan data rawinsonde. Hasil analisis menunjukkan bahwa puncak kejadian banjir Jakarta musim hujan tahun 2013 terjadi pada tanggal 17 Januari 2013 disebabkan oleh faktor lokal yang sangat kuat ditambah dengan faktor global yang mend...

Analisis Sikap Konsumen terhadap Produk Fashion Lokal dan Impor

OpenAIRE

Setiawan, Evelyn

2014-01-01

Abstrak: Analisis Sikap Konsumen Terhadap Produk Fashion Lokal dan Impor. Penelitian ini bertujuan untuk menganalisis sikap konsumen terhadap produk fashion lokal dan impor yang akan berpengaruh terhadap keputusan konsumsi. Sampel yang akan digunakan dalam penelitian ini adalah 1.000 mahasiswa dari 10 perguruan tinggi swasta terbesar di Surabaya. Pengambilan data dilakukan dengan metode kuesioner. Hasil pengujian statistik menunjukkan bahwa sebagian besar mahasiswa di Surabaya merasa bangga d...

Uso de Analisis de Covarianza (ANCOVA en investigacion cientifica.

Directory of Open Access Journals (Sweden)

Badii, M.H.

2008-01-01

Full Text Available The basics of the ANalisis of COVAriance (ANCOVA are given. The objectives and the application of ANCOVA are laid out. Techniques for the estimation of contrasts and for the control and reduction of the degree of error are discussed. The application of a simple ANCOVA using real data is highlighted. The application of this technique in fixing the auxiliary variable in experimentation is emphasized.

ANALISIS RELEVANSI LULUSAN PERGURUAN TINGGI DENGAN DUNIA KERJA

Directory of Open Access Journals (Sweden)

Ali Muhson

2012-04-01

Full Text Available Abstract: A Relevance Analysis of University Graduates with World of Work. Education should be oriented to the competencies required by the workforce as a percentage of unemployment among the educated increase continuously. This study aims to examine the relevance of YSU Economic Education graduates. The study only focuses on the type of work and subjects taught. The subject of this study is the alumni of Economic Education Study Program. Sampling technique used is snowball sampling. Data collection technique using questionnaires and documentation while the technique of data analysis using descriptive analysis. The result suggests that the majority of the graduates find their first job as private a teacher, a private employee and a tutor, while current job of the most graduates are private teacher, private employee, and civil servant (teacher. The data shows that more than 50 percent of the graduates work in the education area. This implies that the relevance level based on the type of work is categorized as sufficient. Majority of the graduates teaches social science, economic, and entrepreneurship, hence it can be concluded that the relevance level based on the subjects taught is highly relevant.   Keyword: relevance of graduates, type of work, unemployment, employment     Abstrak: Analisis Relevansi Lulusan Perguruan Tinggi dengan Dunia Kerja. Pendidikan harus berorientasi pada kompetensi yang dibutuhkan oleh dunia kerja karena persentase penganggur di kalangan terdidik terus meningkat. Penelitian ini bertujuan untuk mengkaji tingkat relevansi (kesesuaian lulusan Pendidikan Ekonomi UNY. Kajian hanya diarahkan pada jenis pekerjaan dan mata pelajaran yang diampu. Penelitian ini mengambil subjek alumni Prodi Pendidikan Ekonomi dari berbagai angkatan. Teknik sampling yang digunakan adalah snowball sampling. Teknik pengumpulan data menggunakan angket dan dokumentasi sedangkan teknik analisis data menggunakan analisis deskriptif. Penelitian ini

Analisis Penerapan Relationship Maintenance Strategy Melalui Penggunaan Media Sosial(Studi Pada Twitter Perbankan di Indonesia

Directory of Open Access Journals (Sweden)

Rahmatul Jannatin Naimah

2016-04-01

Full Text Available Nowadays, banks are actively using twitter in order to maintain relationships with customers. Unfortunately, the trend of using social media as Relationship Maintenance  Strategy  (RMS  for  the  banking  industry  is  not  supported  by adequate research in the realm of marketing public relation science. Positivity, openness, task sharing, networking, access, and assurance are six dimensions that can be used to measure the application of RMS through twitter. Thus, this research aims to analyze whether there are differences in the implementation of RMS in the Indonesia Banking Industry through content analysis of its offi cial twitter.  The  banks  that  will  be  further  investigated  are  the  three  top  banks belonging  to  Indonesia  Bank  Loyalty  Index  (IBLI  and  Most  Followed  Bank (MFB.  Research  fi ndings  resulted  Banks  belonging  to  IBLI  and  MFB  group  has  a different  level  implementation  of  RMS  through  twitter.  The  overall  level  of implementation were found in two groups are still very low, especially in the task sharing dimension. IBLI banks more implement the dimension of RMS than MFB bank group. Assurance was most widely used on the two banking groups.  Keywords : Relationship  Maintenance  Strategy,  Marketing  Public  Relation,  Banking, Twitter.

ANALISIS KONTRIBUSI PAJAK HOTEL TERHADAP PENDAPATAN ASLI DAERAH KABUPATEN NUNUKAN

OpenAIRE

-, MULIATI

2014-01-01

2014 Analisis Kontribusi Pajak Hotel terhadap Pendapatan Asli Daerah Kabupaten Nunukan Analysis of The Contributions Tax on Hotel Againts Regional Renenue Nunukan District Muliati Haerial M. Christian Mangiwa Penelitian ini bertujuan untuk mengetahui seberapa besar kontribusi pajak hotel terhadap pendapatan asli daerah, mengetahui sistem pengawasan, dan potensi yang ada untuk meningkatkan pajak hotel, mengetahui sistem dan prosedur...

Optimizing preventive maintenance with maintenance templates

International Nuclear Information System (INIS)

Dozier, I.J.

1996-01-01

Rising operating costs has caused maintenance professionals to rethink their strategy for preventive maintenance (PM) programs. Maintenance Templates are pre-engineered PM task recommendations for a component type based on application of the component. Development of the maintenance template considers the dominant failure cause of the component and the type of preventive maintenance that can predict or prevent the failure from occurring. Maintenance template development also attempts to replace fixed frequency tasks with condition monitoring tasks such as vibration analysis or thermography. For those components that have fixed frequency PM intervals, consideration is given to the maintenance drivers such as criticality, environment and usage. This helps to maximize the PM frequency intervals and maximize the component availability. Maintenance Templates have been used at PECO Energy's Limerick Generating Station during the Reliability Centered Maintenance (RCM) Process to optimize their PM program. This paper describes the development and uses of the maintenance templates

ANALISIS POTENSI DAN PROYEKSI PENERIMAAN RETRIBUSI PELAYANAN PASAR DI KABUPATEN SEMARANG

Directory of Open Access Journals (Sweden)

Evi Fatmawati

2017-06-01

Full Text Available Retribusi pelayanan pasar merupakan jenis retribusi jasa umum yang cukup potensial, dikarenakan Kabupaten Semarang menarik retribusi dari 33 pasar tradisional setiap harinya. Tujuan penelitian ini, untuk menganalisis potensi penerimaan retribusi pasar di Kabupaten Semarang tahun 2011 – 2015, serta memproyeksi pendapatan retribusi pelayanan pasar tahun 2016 – 2020. Penelitian ini menggunakan analisis kontribusi, analisis pertumbuhan, analisis potensi, dan analisis ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. Hasil penelitian menunjukan: (1 kontribusi retribusi pelayanan pasar terhadap retribusi daerah dan PAD dalam kategori kurang dan sangat kurang, (2 pertumbuhan retribusi pelayanan pasar berfluktuasi, (3 penerimaan retribusi pelayanan pasar belum berdasarkan potensi, (4 target retribusi pelayanan pasar berada dibawah potensi, (5 proyeksi pendapatan retribusi pasar meningkat dalam lima tahun kedepan. Adanya selisih antara potensi dengan realisasi dapat dijadikan peluang oleh Pemerintah Daerah dalam memaksimalkan penerimaan retribusi pelayanan pasar. Saran peneliti yaitu penetapan target sesuai dengan potensi, serta peningkatan kualitas pelayanan pasar, hal tersebut diharapkan dapat meningkatkan sumbangan retribusi pelayanan pasar terhadap PAD di Kabupaten Semarang. Retribution as a source of local income had a great opportunity to be improve and be develop so. Market retribution service was a kind of public service retribution that potential enough, due to Semarang Regency managed and attracted the retribution of 33 traditional markets every day. The objective of this research was to analyze the potential and contribution of market retribution at Semarang Regency in 2011-2015, also approximate local market retribution service in 2016-2010. This research used contribution analysis, the growth analysis, potential analysis, and analyzed ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. The results of this research that : (1

Choice and the cost and benefit analysis of one solar system of renewable energy for the Tepozan Park; Seleccion y analisis costo-beneficio de un sistema de energia renovable para el parque Tepozan

Energy Technology Data Exchange (ETDEWEB)

Lopez P, J. Manuel A; Sheinbaum P, Claudia [Instituto de Ingenieria de la UNAM, Mexico, D. F. (Mexico)

2000-07-01

This article is about the choice process and the cost and benefit analysis of one solar photovoltaic system for the Tepozan Park, which is a space of ecoturism and ecological education, it is at the Tlalpan District in Mexico, D.F. According to this objective, we start with an introduction related to general conditions in the Park and we talk about the energy requirement. Next, the method for the better option choice is shown, this is based on decision analysis of Kepner and Tregoe. The choice option is evaluated according to the main financial tools of the Cost and Benefit Analysis private evaluation. This shows the decision analysis including issued about ecology. Finally, we add a point for the result synthesis, so we can have a complete approach in order to choice a renewable energy. As conclusion is shown the most important costs and benefits, thinking on future decisions about operation and maintenance of the system. [Spanish] En este articulo se presenta el proceso de seleccion y analisis Costo-Beneficio de un sistema de energia solar fotovoltaica para las instalaciones del Parque Tepozan, un espacio de ecoturismo y educacion ambiental, ubicado en la delegacion Tlalpan de Mexico, D.F. Para ello, se da una introduccion de las condiciones generales del parque y de los requerimientos de energia. Posteriormente se presenta un apartado del metodo para la seleccion de la alternativa mas adecuada, sustentado en un analisis de decisiones. La alternativa seleccionada, se somete a una evaluacion de los principales criterios de la evaluacion privada derivada del Analisis Costo Beneficio, con lo que se ilustra el proceso de toma de decision, incluyendo los factores de impacto ambiental. Finalmente, se incorpora un apartado de sintesis de resultados, para aportar un panorama completo en cuanto a la operacion y mantenimiento del sistema dentro del parque.

ANALISIS FINANSIAL DAN KELEMBAGAAN RANTAI NILAI MEBEL MAHONI JEPARA

Directory of Open Access Journals (Sweden)

Nunung Parlinah

2011-12-01

Full Text Available Industri mebel umumnya termasuk dalam industri kecil dan menengah. Selain berperan dalam penerimaan devisa, bisnis di bidang mebel ini juga menciptakan lapangan kerja bagi masyarakat terutama di Kabupaten Jepara. Adanya hubungan (pemberi kepercayaan - (penerima kepercayaan yang terjadi antar aktor atau pelaku di dalam rantai berpengaruh terhadap besarnya distribusi nilai tambah yang diperoleh oleh masingmasing pelaku di sepanjang rantai nilai Tujuan dari penelitian ini adalah mengidentifikasi kelembagaan (aturan yang terjadi antar pelaku di sepanjang rantai nilai mebel mahoni Jepara dan menentukan skenario kebijakan yang dapat mendukung bagi kelestarian industri mebel Jepara. Data yang digunakan meliputi data primer dan data sekunder. Analisis data meliputi identifikasi aktor dan kelembagaan (aturan yang terjadi antar pelaku serta analisis manfaat biaya yang terdiri dari NVP, BCR dan IRR. Hasil penelitian menunjukkan bahwa (1 para pengrajin ( memproduksi mebelnya lebih didasarkan pada pesanan pembeli ( . agent principal Asymetic information yang terjadi antara pedagang kayu dan petani juga telah mengakibatkan posisi petani sebagai (2 Nilai NPV, BCRdan IRR untuk tiap pelaku berbeda-beda tetapi nilai-nilai tersebut mengindikasikan bahwa pola kemitraan yang terjadi antar pelaku dalam rantai nilai mebel mahoni saat ini sudah efektif. Skenario kebijakan yang dapat diterapkan adalah kebijakan yang bersifat insentif bagi petani hutan rakyat, peningkatan kemampuan pengrajin di bidang pemasaran; dan membangun aksi kolektif diantara pengrajin. price taker;

ANALISIS SKENARIO KEGAGALAN SISTEM UNTUK MENENTUKAN PROBABILITAS KECELAKAAN PARAH AP1000

Directory of Open Access Journals (Sweden)

D.T. Sony Tjahyani

2014-03-01

Full Text Available Kejadian Fukushima telah menunjukkan bahwa kecelakaan parah dapat terjadi, maka dari itu sangatlah penting untuk menganalisis tingkat keselamatan pada reaktor daya. Berdasarkan rekomendasi expert mission IAEA setelah kejadian Fukushima, perlu dilakukan upaya untuk meminimalisasi terjadinya kecelakaan parah yaitu dengan melakukan proses pendinginan yang maksimal. Dalam konsep keselamatan fasilitas nuklir, khususnya reaktor daya telah diterapkan konsep keselamatan berlapis (Defence in Depth, DiD. Konsep keselamatan tersebut terdiri atas 5 level pertahanan yang bertujuan mencegah dan mengurangi lepasan produk fisi ke masyarakat dan lingkungan pada saat reaktor daya mengalami kecelakaan. Dalam reaktor telah didesain sistem atau tindakan yang mempunyai fungsi untuk mengatasi setiap level tersebut. Tujuan dari analisis ini adalah menentukan probabilitas kecelakaan parah dengan melakukan skenario kegagalan sistem dalam proses pendinginan di reaktor. Sebagai obyek analisis adalah reaktor daya AP1000, karena jenis reaktor ini sedang banyak dibangun saat ini. Skenario dilakukan dengan mengasumsikan beberapa kombinasi kegagalan sistem yang termasuk dalam DiD level 2 dan 3. Kegagalan sistem kemudian dianalisis dengan menggunakan analisis pohon kegagalan berdasarkan perangkat lunak SAPHIRE ver. 6.76. Dari analisis didapatkan probabilitas gagal dari kelompok sistem DiD level 2 dan 3 pada AP1000 masih di bawah batas kriteria dari IAEA yaitu lebih kecil dari 10-2, serta probabilitas kecelakaan parah didapatkan sebesar 6,17 x 10-10. Berdasarkan analisis ini disimpulkan bahwa AP1000 mempunyai tingkat keselamatan yang cukup tinggi, karena melalui skenario kegagalan sistem didapatkan probabilitas kecelakaan parah yang sangat kecil.   ABSTRACT Fukushima accident has shown that severe accident could be occurred, therefore it is important to analyze safety level of nuclear power plants. Based on the recommendations of IAEA expert mission after the Fukushima accident

Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung Di Kota Bengkulu

Directory of Open Access Journals (Sweden)

Jaka A. I. Paski

2018-01-01

Citation: Paski, J.A.I., Faski, G.I.S.L., Handoyo, M.F. dan Pertiwi, D.A.S. (2017. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung di Kota Bengkulu. Jurnal Ilmu Lingkungan, 15(2, 83-89, doi:10.14710/jil.15.2.83-89

Pengaruh Advance Organizer Berbasis Proyek Terhadap Kemampuan Analisis – Sintesis Siswa

Directory of Open Access Journals (Sweden)

Tasiwan -

2014-01-01

Full Text Available Penelitian ini dilakukan untuk mengetahui pengaruh model pengatur kemajuan (advance organizer berbasis proyek terhadap kemampuan analisis – sintesis siswa pada konsep Energi. Sebelum pembelajaran, diberikan tugas proyek pada siswa untuk merealisasikan bel listrik sederhana, rangkaian arus seri - paralel, dan tuas. Produk proyek digunakan sebagai advance organizer dalam pembelajaran di kelas. Penguatan kognitif dilakukan melalui diskusi kelompok dan pembuatan peta konsep, ekspositori guru di kelas, dan kegiatan eksperimen laboratorium. Data diambil melalui pretest, post test, observasi partisipatif pembelajaran oleh dua orang observer, penilaian produk, peta konsep dan laporan kegiatan eksperimen. Teknik analisis data meliputi uji prasyarat data dan uji hipotesis Hasil penelitian menunjukkan bahwa siswa mengalami peningkatan kemampuan analisis – sintesis dalam aspek menguraikan, mengkategorikan, mengidentifikasi, merumuskan pernyataan, merekonstruksi, menentukan konsep, dan menganalisis konsep dengan rata – rata peningkatan delta skor sebesar 54,46 %, uji t sebesar 6,4, dan skala gain sebesar 0,3. This study was conducted to determine the effect of project-based advance organizer model on student’s analysis - synthesis ability of the energy concept. Students were given an assignment to realize the project on simple electric bell, the series – parallel circuit, and lever, before learning. The products of project were used as an advanced organizer in the learning activity. Cognitive strengthening was done through group discussions and concept mapping, expository learning in the classroom, and laboratory experiments activities. The data were taken through a pretest, post-test, participant observation study by two observers, product assessment, concept maps and report of experiment activities. Results showed that the students’ analysis - synthesis ability increased in the aspect of describing, categorizing, identifying, statement

ANALISIS BEBAN KERJA DENGAN MENGGUNAKAN METODE CVL DAN NASATLX DI PT. ABC

Directory of Open Access Journals (Sweden)

Renty Anugerah Mahaji Puteri

2017-10-01

Full Text Available PT. ABC merupakan perusahaan Jepang yang bergerak di bidang usaha jasa konstruksi mekanikal, elektrikal, dan system komunikasi. Sebagai perusahaan jasa konstruksi, PT. ABC dituntut untuk mencapai tujuan / target perusahaan tiap tahunnya yaitu mendapatkan tender proyek, maka tak jarang karyawannya dituntut untuk lembur. Seringnya karyawan lembur, maka menimbulkan masalah kelelahan terhadap para karyawannya sehingga target tidak tercapai. Penelitian ini bertujuan untuk mengevaluasi beban kerja yang dialami oleh engineer leader pada Departemen DesaindanOperasional di PT. ABC. Beban kerja yang diukur adalah beban kerja fisik dan mental. Beban kerja fisik diukur berdasarkan cardiovascular load (CVL. Beban kerja mental diukur dengan menggunakan metode NASA-Task Load Index (NASA-TLX. Berdasarkan hasil analisis CVL, beban kerja fisik yang diterima engineer proyek memiliki presentase CVL sebesar 31,16%, denganhasilperbaikanmenjadi 23,38%. Sedangkan dari hasil analisis NASA-TLX, beban kerja mental yang diterima engineer proyek yaitu dengan skor NASA-TLX 74,2% denganhasilperbaikanmenjadi 51,6%, sedangkan skor NASA-TLX engineer head office 61,5% denganhasilperbaikanmenjadi 47,66%.

Analisis Struktur Kristal Lifepo4 Olivine Sebagai Bahan Katoda Batere Li-Ion

Directory of Open Access Journals (Sweden)

Indra Gunawan

2013-10-01

Full Text Available Sintesis LiFePO4 dilakukan dengan pencampuran LiCl, FeCl2.4H2O dan H3PO4 ekuimolar ke dalam air. Homogenasi larutan dilakukan dengan pengaduk magnetic pada suhu 60o C. Prekursor LiFePO4 diperoleh setelah pemanasan 200o C dengan furnace selama 2 jam. Sintering prekursor LiFePO4 dilakukan pada suhu 700o C dengan furnace selama 4 jam dengan aliran N2 untuk membentuk fasa kristalit LiFePO4. Kemurnian fasa dan struktur kristal dianalisis dengan menggunakan XRD. Analisis struktur kristal dari pola difraksi sinar-X dilakukan dengan perangkat lunak FULLPROF. Pengamatan morfologinya dilakukan dengan menggunakan SEM dengan kombinasi energy dispersive spectroscopy (EDS dan pengukuran gugus fungsional dengan FT-IR. Hasil analisis struktur kristal menunjukkan bahwa senyawa LiFePO4 memiliki struktur Kristal orthorhombic, space group 62, simbol Pnma (Hermann-Mauguin dengan parameter kisi a= 6.0019999, b= 10.330000, c= 4.6999998. 

Analisis dan Rencana Pengembangan Jaringan Distribusi Air Bersih Unit Cabang Timur PDAM Kabupaten Klaten

Directory of Open Access Journals (Sweden)

Ana Tri Lestari

2017-01-01

Full Text Available Unit Cabang Timur Perusahaan Daerah Air Minum (PDAM Kabupaten Klaten dibagi menjadi 3 unit pelayanan Ibu Kota Kecamatan (IKK dan mempunyai tingkat pelayanan yang masih rendah pada tahun 2015, yaitu Unit IKK Ceper 17,6%; Unit IKK Pedan 2,43%; dan Unit IKK Cawas 31,26% sehingga peningkatan persen pelayanan menjadi hal yang perlu dilakukan. Hal ini didukung dengan adanya penambahan debit produksi sebesar 50 liter/detik. Selain itu, jaringan distibusi belum dibentuk blok pelayanan sehingga sulit untuk mengontrol kehilangan air. Perencanaan ini dilakukan pembagian blok pelayanan menjadi 26 blok dan 5 tapping. Setelah itu dilakukan analisis kondisi eksiting. Hasil analisis kondisi eksisting menunjukkan kondisi hidrolika perpipaan kecuali kecepatan masih memenuhi kriteria, yaitu tekanan antara (15,43-59,99 m, kecepatan (0-0,91 m/detik, unit headloss (0-3,51 m/km. Kemudian dilakukan pengembangan jaringan yang dibagi menjadi 2 tahap, dimana tahap 1 meningkatkan persen pelayanan, sedangkan tahap 2 menambah daerah pelayanan baru. Blok pelayanan setelah pengembangan menjadi 29 blok dan 5 titik tapping. Kemudian analisis rencana pengembangan dilakukan dan menunjukkan bahwa kondisi hidrolika pipa untuk tekanan di jaringan distribusi IKK Cawas bernilai negatif. Hal ini dikarenakan unit headloss yang terjadi pada pipa dari reservoir menuju titik tapping pertama IKK Cawas sebesar 5,78 m/km dengan panjang pipa 14,35 km sehingga headloss  sebesar 82,94 m menyebabkan tekanan menjadi -2,89 m. Permasalahan ini dapat diatasi dengan parallel pipa diameter 200 mm sepanjang 9 km. Parallel pipa tersebut mengakibatkan tekanan  pada titik tapping pertama IKK Cawas menjadi 34,65 m dan titik tapping terjauh (blok 19 sebesar 16,34 m.  Hasil analisis hidrolika, seperti unit headloss berada pada rentang (0-5,78 m/km, namun kecepatan masih ada yang di bawah 0,3 m/detik. Rencana anggaran biaya (RAB yang dibutuhkan untuk melakukan pengembangan jaringan sebesar Rp 2.470.153,051.71.

Analisis Karakteristik Hujan untuk Pendugaan Debit Aliran Rencana Sungai Anafri di Kota Jayapura

Directory of Open Access Journals (Sweden)

Nurfaijin Nurfaijin

2016-10-01

Full Text Available ABSTRAK Penelitian ini bertujuan mengkaji karakteristik hujan wilayah DAS Anafri, menghitung debit aliran rencana, dan mengkaji kapasitas Sungai Anafri dalam merespon pengalihragaman hujan menjadi aliran permukaan. Kajian karakteristik hujan yakni ketebalan, intensitas, dan durasi hujan dilakukan dengan analisis statistik data hujan. Analisis distribusi data hujan diasumsikan sesuai dengan Metode Gumbel, sehingga untuk menentukan hujan periode ulang 2 tahun, 5 tahun, 10 tahun, dan 25 tahun menggunakan persamaan Gumbel. Hujan periode ulang digunakan untuk menghitung debit aliran rencana Metode Rasional. Analisis kapasitas sungai dilakukan dengan membandingkan debit aliran rencana dalam periode ulang T dengan kapasitas sungai. Penghitungan kapasitas sungai dilakukan pada penampang PI (bagian hulu, P2,dan P3 (bagian hilir. Debit aliran rencana yang digunakan dalam analisis kapasitas sungai adalah debit aliran Q25tahun (107,478 m³/detikdan 163,726 m³/detik. Hasil analisis menunjukan bahawa, terjadinya limpasan pada penampang sungai PI dan P2 pada saat menampung debit banjir yang diketahui penyebab utamanya adalah bank full capacity kecil, maka alternat! ( penanganan yang direkomendasikan adalah peninggian tanggul sungai. Analisis kapasitas sungai menggunakan debit banjir periode ulang 25 tahun menunjukan bahwa, terjadi limpasan pada lokasi penampang PI sampai P2 dengan panjang ruas 400 m yang terjadi pada tanggul sisi kanan dan tanggul sisi kiri dengan panjang ruas 40 meter. Limpasan terjadi setinggi 0,1 m hingga 1,6 m pada tanggul sisi kanan dan 0,1 m hingga 0,3 m pada tanggul sisi kiri, sehingga peninggian tanggul yang direkomendasikan adalah setinggi 1,6 mpada sisi kanan dan 0,3 m pada tanggul sisi kiri. ABSTRACT This study aims to examine the characteristics of rainfall watershed of Anafri calculate the flow rate plan, and assess the river capacity to respond diversion of rain to be surface runoff. In this study, the analysis of rainfall

Analisis “Brand Equity” Siaran Berita Stasiun Televisi Swasta Indonesia

OpenAIRE

Arif Sugiono; Prima Mulyasari Agustina

2004-01-01

Penelitian ini bertujuan untuk mengetahui keadaan berbagai merek siaran berita stasiun televisi swasta berdasarkan dimensi ekuitas mereknya, dengan memfokuskan pada empat dimensi ekuitas merek, yang meliputi loyalitas merek, kesadaran merek, persepsi kualitas, dan asosiasi merek. Metode yang digunakan metode deskriptif, dengan analisis data menggunakan tabulasi dan teknik skala. Hasil penelitian dari dimensi loyalitas merek tiga besar siaran berita secara berurutan adalah Buser, Patroli dan L...

Preventive maintenance and reliability-centered maintenance

International Nuclear Information System (INIS)

Anderson, J.G.

1989-01-01

In the recent past, the primary function of the preventive maintenance program at a nuclear power plant was to maintain the operability and reliability of the plant. Reducing overall maintenance costs by performing effective preventive maintenance, instead of more costly and disruptive corrective maintenance, instead of more costly and disruptive corrective maintenance, was a secondary consideration. In today's operating environment, the preventive maintenance program must meet the test of cost-effectiveness as well as many new standards for performance that are being required by rate regulators. The preventive maintenance program must be able to withstand the challenge of independent audit to a new standard of technical adequacy and compliance with recommendations from component vendors. In this new environment, the standard that is being applied at the San Onofre nuclear generating station (SONGS) is that the preventive maintenance program must meet the test of cost-effectiveness, improve equipment performance, support increased plant availability, and (a) literally implement the recommendations of the vendor, (b) provide other compensation for the vendor recommendation, or (c) provide technical justification for the deviation. The subject of this paper is the way that reliability-centered maintenance (RCM) is helping SONGS meet these challenges

Analisis Derau dalam Perancangan Rangkaian Terintegrasi Op-Amp

Directory of Open Access Journals (Sweden)

Siti Sendari

2009-02-01

Full Text Available Perancangan IC Op-Amp, memerlukan spesifikasi-spesifikasi yang meliputi parameter proses dan parameter perancangan. Dalam menentukan parameter perancangan, derau merupakan suatu hal yang tidak bisa ditinggalkan, karena derau dapat menentukan keandalan perancangan. Untuk menganalisis derau pada IC Op-Amp langkah pertama yang harus diketahui adalah sumber-sumber derau, setelah itu dilakukan analisis derau baik secara teoritis maupun secara simulasi untuk mengetahui derau yang mungkin terjadi dalam perancangan IC, apakah sudah sesuai dengan spesifikasi yang ditentukan atau tidak. Untuk simulasi derau dapat dilakukan dengan program Spice.

Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa

Directory of Open Access Journals (Sweden)

- Erman

2013-01-01

Full Text Available Abstract: Biochemistry Teaching through Sport-case Analyses to Improve Students' Sport Scientific Literacy. This quasi-experimental study focuses on examining the effect of biochemistry teaching on students' sport scientific literacy (SSL. The study involved 107 students of a teacher training institution, selected using a stratified random sampling. The results of t-test utilizing pre-test and post-test control group design show that biochemistry teaching affects students' SSL, as indicated by the scores of the experimental group which were four times higher than those of the control group. The SSL level of the experimental group increased from level 2 (nominal and level 3 (functional to level 3 (functional, level 4 (conceptual, and level 5 (multidimensional. Abstrak: Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa. Penelitian ini bertujuan untuk mengetahui pengaruh pembelajaran biokimia melalui analisis kasus-kasus olahraga terhadap literasi sport scientific mahasiswa. Sebanyak 107 mahasiswa dari program studi ilmu keolahragaan sebuah LPTK di Surabaya dipilih sebagai sampel dengan menggunakan sampling random berstrata. Desain yang digunakan adalah desain pretest-posttest control group dari desain kuasi eksperimen. Data dianalisis dengan uji-t sampel independen. Hasil peneli­tian menunjukkan bahwa pembelajaran biokimia melalui analisis kasus-kasus olahraga merupakan suatu metode yang efektif untuk meningkatkan sport Scientific literacy (SSL mahasiswa. Rerata skor perolehan SSL yang diperoleh mahasiswa kelompok eksperimen sekitar 4 kali lebih tinggi daripada yang diperoleh mahasiswa kelompok kontrol. Tingkatan SSL mahasiswa naik dari level 2 (nominal dan level 3 (fungsional menjadi level 3 (fungsional, level 4 (konseptual, dan level 5 (multidimensional.

Opportune maintenance and predictive maintenance decision support

OpenAIRE

Thomas , Edouard; Levrat , Eric; Iung , Benoît; Cocheteux , Pierre

2009-01-01

International audience; Conventional maintenance strategies on a single component are being phased out in favour of more predictive maintenance actions. These new kinds of actions are performed in order to control the global performances of the whole industrial system. They are anticipative in nature, which allows a maintenance expert to consider non-already-planned maintenance actions. Two questions naturally emerge: when to perform a predictive maintenance action; how a maintenance expert c...

Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

OpenAIRE

Nurul Dzakiya; MGS. Dwiki Nugraha; Nenden L. Sidik; Trias Galena

2017-01-01

Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m), lempung pasiran (11-30 m) dan lapukan batuan diorit (30-55 m) yang berada di kedalaman berbeda. Ketebalan batuan di pe...

Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan

OpenAIRE

Fachri, Yusrizal

2017-01-01

130306044 YUSRIZAL FACHRI, 2017. “Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan”. Dibimbing oleh ARMYN HAKIM DAULAY dan NEVY DIANA HANAFI. Penelitian ini bertujuan untuk mengidentifikasi karakteristik lembaga pemasaran, bentuk saluran, fungsi pemasaran, dan menganalisis nilai tambah di lembaga-lembaga pemasaran ayam ras pedaging di pasar tradisional Kota Medan pada April sampai Mei 2017. Penelitian ini menggunakan data primer yang didapatkan dari observasi dan waw...

Analisis Kekuatan Struktur Pallet Menggunakan Metode Elemen Hingga

Directory of Open Access Journals (Sweden)

Tria Mariz Arief

2015-07-01

Full Text Available Pallet sebagai suatu alat bantu untuk mempermudah proses bongkar-muat logistik. Palletdigunakan hampir dalam berbagai lingkungan transportasi logistik. Pada bahasan berikutdikhususkan dalam lingkup transportasi di dalam pesawat udara khususnya pada pesawatangkut militer. Di lingkungan militer pallet digunakan untuk transport logistik baik secara normalmuat (loading dan bongkar (unloading maupun kondisi bongkar dengan diterjunkan daripesawat udara. Untuk pemenuhan penggunaan tersebut dilakukan perancangan ulang (reverseengineering struktur pallet yang dapat dimanufaktur secara lokal. Hipotesis awal menunjukkanbahwa berdasarkan kondisi pembebanan pada pallet dapat diperkirakan bahwa kondisitegangan dan regangan maksimum akan terjadi pada posisi sudut struktur pallet yang ditransferbebannya ke komponen plat besi penahan siku-siku dan baut. Material yang digunakan padastruktur pallet adalah Allumunium Alloy 7075-T6 dengan kekuatan tarik sebesar 503 MPa.Analisis dilakukan dengan menggunakan simulasi numerik dengan metoda elemen hingga(FEM. Proses simulasi numerik kekuatan struktur pallet difokuskan pada pembebanan statis(termasuk pengaruh factor G dalam interval beban statis 4 ton sampai 7 ton. Analisis dilakukanpada perubahan variabel tegangan dan regangan terhadap variasi beban yang diberikan untukmendapatkan tingkat keamanan struktur (margin safety. Pemodelan dilakukan denganidealisasi model ¼ bagian menggunakan elemen terstruktur dengan jenis elemen hexahedral(brick dengan jumlah 73803 elemen dan 360323 node. Hasil analisis menunjukkan teganganekuivalen maksimum struktur Pallet adalah 94 MPa yang terjadi di penguat sudut (anglebracket. Sedangkan pada struktur penguat lapis (sandwich structure berbahan thick blockyang mempunyai kekuatan sebesar 20 MPa adalah sebesar 0.84 MPa. Tingkat keamanansecara keseluruhan struktur dengan mempertimbangkan factor G hingga 2 adalah 5.3.Kata kunci: Analisis struktur, pallet, logistik, reverse engineering, FEM

Analisis Tata Kelola Teknologi Informasi Menggunakan Kerangka Kerja COBIT 4.1 pada Fakultas Teknik Undip

Directory of Open Access Journals (Sweden)

Arini Arumana

2014-06-01

Full Text Available Peran teknologi informasi dalam suatu instansi sudah tidak dapat dielakkan lagi, mengingat perkembangannya yang begitu pesat seiring berjalannya waktu. Namun masalah yang sering terjadi di instansi adalah penggunaan teknologi informasi yang kadang tidak sesuai dengan harapan. Oleh karena itu diperlukan tata kelola terhadap penggunaan teknologi informasi yang biasa disebut dengan IT Governance. Fakultas teknik UNDIP adalah salah satu fakultas yang dalam operasionalnya sangat mengandalkan teknologi informasi, baik dalam aktifitas belajar mengajar maupun dalam menjalankan operasional bisnis. Kondisi sekarang di Fakultas Teknik sendiri tidak terdapat suatu indikator yang dapat menyatakan bahwa kinerja TI yang berjalan telah sesuai dengan visi dan misi Fakultas Teknik, oleh karena itu perlu dilakukan analisis tata kelola teknologi informasi, guna mengetahui performa TI sekarang sesuai dengan yang diharapkan oleh managemen atau tidak. Hasil dari analisis ini berupa tingkat kematangan tata kelola TI yang mecerminkan kondisi tata kelola TI di Fakultas Teknik dengan mengacu pada maturity level yang disediakan kerangka kerja COBIT 4.1, yakni dari level 0 (non-existent sampai 5 (optimized. Berdasarkan analisis yang dilakukan, secara garis besar kondisi kematangan tata kelola TI Fakultas Teknik berada pada level 2 yakni repeatable but intuitive. Kondisi ini mengacu pada beberapa kelemahan dalam proses-proses TI yang berjalan, diantaranya penetapan dan dokumentasi tindakan, kebijakan dan prosedur yang minim, serta tidak tersedianya service level yang disetujui bersama.

ANALISIS KEBUTUHAN UNTUK PENGEMBANGAN MODUL INKUIRI BERBASIS PERTANYAAN (MIBP DI SMP

Directory of Open Access Journals (Sweden)

Desak Made Citrawathi

2016-08-01

Full Text Available melakukan analisis kebutuhan untuk pengembangan dan penyusunan modul inkuri berbasis pertanyaan (MIBP. MIBP disusun untuk memfasilitasi pembelajaran sains agar dapat meningkatkan penguasaan konsep biologi, keterampilan proses sains, dan kemampuan berpikir siswa SMP. Pengembangan MIBP menggunakan model ADDIE. Prosedur pengembangan terdiri dari 5 tahap, yaitu 1 Menganalisis, 2 Mendisain, 3 Mengembangkan dan produksi, 4 Mengimplementasikan, dan 5 Mengevaluasi. Penelitian dilakukan dalam waktu 3 tahun. Pada tahun pertama ini dilakukan analisis kebutuhan dan mendisain MIBP. Subjek penelitian adalah guru IPA SMP Negeri dan Swasta di Kecamatan Buleleng. Pengumpulan data dilakukan dengan wawancara, penyebaran angket, observasi, dan dokumentasi. Analisis data dilakukan secara deskriptif dan interpretatif. Dari hasil analisis diperoleh bahwa kurikulum yang digunakan di SMPN 1,SMPN 2, dan SMPN 4 adalah kurikulum 2013, sedangkan di SMP lainnya masih menggunakan kurikulum 2006. Kemampuan guru bertanya untuk meningkatkan keterampilan proses sains, penguasaan konsep, dan kemampuan berpikir belum optimal. Hal ini ditunjukkan dari jenis pertanyaan yang diajukan guru 85,8 persen bersifat konvergen, dan 14,2 persen bersifat divergen. Berdasarkan pertanyaan menurut Taksonomi Bloom, pertanyaan yang diajukan guru 74,4 persen pertanyaan ingatan, 22,6 persen pemahaman, 2,68 persen aplikasi, dan 0,32 persen analisis. Salah satu yang dapat dilakukan untuk meningkatkan kemampuan guru adalah memfasilitasi pembelajarannya dengan MIBP. Dari karakteristik perkembangan kognitifnya, siswa SMP dapat dibelajarkan dengan strategi inkuiri, dan guru setuju dengan pengembangan MIBP. Kata kunci: Kemampuan berpikir, keterampilan proses sains, Modul Inkuiri Berbasis Pertanyaan, penguasaan konsep Pertanyaan, penguasaan konsep Abstract The purpose of this study was to analyze the need for the development and preparation of question-based inquiry module (QBIM. QBIM was designed conceiv to

ANALISIS STRATEGI PENGEMBANGAN SEKTOR PERTANIAN SUB SEKTOR BAHAN PANGAN DI KABUPATEN BOYOLALI

Directory of Open Access Journals (Sweden)

Muhammad Zaenuri

2017-06-01

Full Text Available Permasalahan yang dikaji dalam penelitian ini adalah 1. Komoditas tanaman bahan makanan unggulan apa saja yang ada di masing-masing kecamatan di Kabupaten Boyolali, 2 Bagaimana strategi perencanaan pengembangan subsektor tanaman bahan makanan dilihat dari kelengkapan infrastruktur di Kabupaten Boyolali, 3 Bagaimana laju pertumbuhan sektor tanaman bahan makanan yang dimiliki tiap kecamatan di Kabupaten Boyolali. Data yang digunakan adalah data sekunder. Metode analisis data menggunakan analisis Location Quotient (LQ, Shift Share (SS, Klassen Typologi. Berdasarkan hasil penelitian dengan menggunakan analisis Location Quotient (LQ diketahui pengembangan komoditas padi terdapat di Kecamatan Ngemplak, Kecamatan Banyudono, Kecamatan Sawit. Komoditas tanaman jagung terdapat di Kecamatan Selo, Kecamatan Ampel, Kecamatan Cepogo dan Kecamatan Musuk. Komoditas ubi kayu di Kecamatan Klego, kecamatan Simo. Komoditas ubi jalar di Kecamatan Selo, Kecamatan Simo dan Kecamatan Mojosongo. Komoditas kacang tanah ada di Kecamatan Boyolali dan Kecamatan Nogosari. Komoditas kedelai di Kecamatan Juwangi, Kecamatan Sambi, Kecamatn Kemusu dan Kecamatan Wonosegoro. The problems that were in this research is 1 Commodities food plants seed material what it was in each carpel kecamatan in kabupaten boyolali, 2 how strategy sub planning the development of the food crops sector seen from the completeness of the infrastructure in boyolali district, 3 how sector growth rate of plants of food material possessed every sub-district in boyolali district. The data used was secondary data. Data analysis methods using analysis loqation quotient (LQ, shift share (SS, klassen typologi . According to the research using analysis loqation quotient (LQ development rice is in in ngemplak, in banyudono, in palm. Corn is crops in district violoncello, in ampel, in cepogo and in musuk. Commodities cassava in district klego, in simo. Commodities sweet potatoes in in violoncello, in simo and

ANALISIS SPASIAL FAKTOR LINGKUNGAN PADA KEJADIAN DEMAM BERDARAH DENGUE DI KECAMATAN GENUK

Directory of Open Access Journals (Sweden)

Kartika Kirana

2017-10-01

Full Text Available ABSTRAK Kecamatan Genuk merupakan salah satu kecamatan yang endemis DBD di Kota Semarang. Secara berturut-turut sejak tahun 2012 hingga 2014, Kecamatan Genuk masuk sebagai tiga besar kasus DBD terbanyak. Salah satu faktor yang mempengaruhi kejadian DBD adalah faktor lingkungan. Tujuan penelitian ini adalah untuk mengetahui gambaran dari hasil analisis spasial faktor lingkungan dengan kejadian DBD di Kecamatan Genuk. Jenis penelitian ini deskriptif dengan pendekatan kuantitatif. Fokus penelitian ini adalah kondisi SPAL, penumpukan ban bekas dan sumur gali. Penelitian ini dilakukan di Kecamatan Genuk (Kelurahan Genuksari, Karangroto, Bangetayu Kulon dan Banjardowo pada bulan Maret 2016. Instrumen meliputi lembar observasi, peta lokasi, Global Positioning System (GPS, alat fotografi dan AcrGIS. Analisis data menggunakan SIG. Hasil penelitian menunjukkan bahwa kejadian DBD menggerombol pada beberapa RW yang berdekatan dengan keberadaan penumpukan ban bekas sekitar permukiman dan sumur gali terbuka.   Kata Kunci        : demam berdarah (DBD, lingkungan, analisis spasial     ABSTRACT Genukis one of dengue fever endemic district in Semarang city. Since 2012 until 2014, Genuk involve as the place that has high incidence of Dengue Fever. One of the factors in the incidence Dengue Fever areenvironmental factors.The goals of this research wasto analize spatial environmental factorsin the incidence Dengue Fever in Genukdistrict. This was a quantitative descriptive research with descriptive survey. The unit this research was water puddle on the pilling of the tire, the dug wells, and waste water pipeline that located in Genuk District (Subdistrict of Genuksari, Karangroto, Bangetayu Kulon and Banjardowo at March 2016. The instruments were paper of observation,the  map, GPS, camera and ArcGIS. Data was analyzed with GIS. The study showed that dengue fever transmission was inthe area with pilling of the tire, and the dug wells.   Keywords �

Profiling, analisi delle prestazioni e proposte per l'ottimizzazione del RDBMS MySQL utilizzato dal progetto DIRAC/LHCbDIRAC

CERN Document Server

Mesin, Alberto

Il lavoro presentato in questa tesi riguarda lo studio, l'analisi e la formula- zione di proposte per il miglioramento del database di back-end del progetto DIRAC/LHCbDIRAC. LHCbDIRAC, basato su DIRAC, e il sistema di sot- tomissione per l'accesso all'infrastruttura distribuita Grid per l'esperimento LHCb del CERN. Ad esso e adata la gestione dei job di Produzione, Mer- ge, Ricostruzione degli Eventi e Analisi per i dati sperimentali e simulati. Il sistema utilizza un RDBMS MySQL per la gestione di numerosi databa- se. La volonta di passare ad un motore relazionale e transazionale per la denizione schemi e la possibilita che, in un recente futuro, il DBMS possa rappresentare un serio limite alle prestazioni del sistema stesso hanno reso necessario questo studio. Il lavoro svolto si e concentrato sul proling di un singolo schema relazionale per il quale sono stati utilizzati metodi di analisi e fornite soluzioni ai problemi riscontrati il quanto piu possibile generali e per tanto validi per l'intero sistema. L...

Il difficile cammino dell’analisi musicale in Italia

Directory of Open Access Journals (Sweden)

Claudio Annibaldi

2014-10-01

Full Text Available Si immaginino gli atti d’un convegno sull’analisi musicale che abbia avuto luogo in un paese come la Francia, la Germania, l’ Inghilterra o gli Stati Uniti. Potrebbe mai accadere che essi vengano pubblicati sostituendo il discorso ufficiale d’apertura dei lavori con un testo tutto nuovo epperò simulante d’esser quello effettivamente pronunciato dall’autore? E potrebbe mai accadere - essendo costui un noto critico musicale e il direttore della collana editoriale comprendente gli atti in questione - che questo nuovo testo sia da lui dedicato a uno sfoggio della propria competenza analitica capace solo di esibire una visione dilettantesca della tecnica musicale tout court? Penso proprio di no. Eppure questo è accaduto in Italia non molti anni fa, quando le Edizioni Unicopli pubblicarono, nella collana dei "Quaderni di Musica/Realtà", gli atti di un convegno sull’analisi musicale tenuto nel 1989 a Reggio Emilia: il primo del genere negli annali della musicologia italiana. L’episodio rende bene l’idea dei pericoli incombenti sul cammino di quegli studiosi che, a far data dal convegno suddetto, si sono adoperati a che la pratica analitica acquisisse anche da noi la dignità scientifica di cui gode, appunto, in paesi come la Francia, la Germania, l’Inghilterra o gli Stati Uniti. Quei pericoli si chiamano ‘dilettantismo tecnico’, ‘arroganza intellettuale’, ‘ vezzo d’ imporre l’uno e l’altra grazie a un qualche tipo di potere personale’, ‘necessità di subire tale imposizione in cambio di qualche vantaggio pratico’.

Analisis Algoritma Pergantian Cache Pada Proxy Web Server Internet Dengan Simulasi

OpenAIRE

Nurwarsito, Heru

2007-01-01

Pertumbuhan jumlah client internet dari waktu ke waktu terus bertambah, maka respon akses internet menjadi semakin lambat. Untuk membantu kecepatan akses tersebut maka diperlukan cache pada Proxy Server. Penelitian ini bertujuan untuk menganalisis performansi Proxy Server pada Jaringan Internet terhadap penggunaan algoritma pergantian cache-nya.Analisis Algoritma Pergantian Cache Pada Proxy Server didesain dengan metoda pemodelan simulasi jaringan internet yang terdiri dari Web server, Proxy ...

ANALISIS FAKTOR-FAKTOR YANG MENDORONG WISATAWAN MELAKUKAN KEPUTUSAN PEMBELIAN TIKET PESAWAT MELALUI MOBILE BOOKING PADA SITUS TRAVELOKA.COM

Directory of Open Access Journals (Sweden)

Erni Muliana

2016-07-01

Full Text Available Pembelian kebutuhan perjalanan wisata secara online merupakan bagian dari transaksi business to-customer (B2C. Produk yang ditawarkan biasanya terdiri dari: pemesanan paket wisata, penjualan tiket pesawat dan kereta api, kamar hotel dan penyewaan transportasi. Penelitian dilakukan dengan tujuan untuk mengetahui faktor-faktor yang mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com serta faktor yang paling banyak berkontribusi dalam menentukan keputusan pembelian tersebut. Teknik pengumpulan data yang digunakan adalah kuesioner online dan kuesioner yang disebarkan secara langsung (offline kepada 250 responden, penentuan responden ditetapaka menggunakn metode purposive sampling, sedangkan teknik analisis data yang digunakan adalah teknik analisis faktor. Hasil analisis faktor yang didapatakan menjelaskan 67,066% dari keseluruhan total variance, dan hasil analisis data menunjukkan empat faktor terbentuk yang mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com, yaitu: kemudahan dan sistem informasi website (24,396 %, pelayanan konsumen/customer service (15,211%, citra perusahaan (14,681 %, dan motivasi pembelian (12,779%, adapun faktor yang paling berkontribusi dalam mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com adalah faktor terbentuk yang memiliki faktor laoding tertinggi dari keseluruhan faktor yang terbentuk, yaitu faktor “Kemudahan dan Sistem Informasi Website”, faktor ini terdiri dari 13 variabel yakni: (1 Kemudahan pencarian situs web, (2 kecepatan waktu mengakses (load time, (3 nama domain perusahaan, (4 kemudahan pemesanan, (5 Informasi yang lengkap, (6 Informasi yang akurat, (7 Informasi yang menarik, (8 Pemaparan informasi yang tepat, (9 Ketersediaan dan aksesibilitas, (10 Harga yang kompetitif, (11 Pengalaman secara keseluruhan, (12 Keamanan data

PENGKLASIFIKASIAN KARAKTERISTIK MAHASISWA BARU DALAM MEMILIH PROGRAM STUDI MENGGUNAKAN ANALISIS CLUSTER

Directory of Open Access Journals (Sweden)

Maxsi Ary

2016-03-01

Full Text Available Abstract - Object Clustering is one of the object mining process which aims to partition an existing object into one or more cluster objects based on their characteristics. Private Universities is one of the alternatives for the community colleges to meet increased demand for educational needs. The number of private colleges, especially in Bandung and generally in Indonesia is quite a lot. The number of colleges and universities means used to attract prospective students to be an interesting thing to study. As a reason for the intense competition in the search for new students, no doubt there are some ways that actually do not need to be done. Issues raised, namely classify new students of characteristics in selecting a course using cluster analysis. Data obtained from the questionnaire prospective new students in February 2014 Data processing using SPSS. The results using analysis SPSS aiming easier to describe the characteristics of each group of new students in choosing courses. Keywords: Clustering, characteristics of students, courses, cluster analysis Abstrak - Pengelompokan Objek (object clustering adalah salah satu proses dari objek mining yang bertujuan untuk mempartisi objek yang ada kedalam satu atau lebih cluster objek berdasarkan karakteristiknya. Perguruan tinggi swasta merupakan salah satu perguruan tinggi alternatif bagi masyarakat untuk menghadapi peningkatan permintaan terhadap kebutuhan pendidikan. Jumlah perguruan tinggi swasta khususnya di Bandung dan umumnya di Indonesia berjumlah cukup banyak. Jumlah perguruan tinggi dan cara yang digunakan perguruan tinggi untuk menarik minat calon mahasiswa menjadi hal yang menarik untuk dikaji. Sebagai alasan ketatnya persaingan dalam mencari calon mahasiswa baru, tidak dipungkiri terdapat beberapa cara yang dilakukan yang sebetulnya tidak perlu dilakukan. Persoalan yang dikemukakan yaitu mengklasifikasikan karakteristik mahasiawa baru dalam memilih program studi menggunakan analisis

ANALISIS KELAYAKAN FINANSIAL WISATA AIR WADUK JATIGEDE KABUPATEN SUMEDANG

Directory of Open Access Journals (Sweden)

Bambang Susanto

2016-04-01

pendahuluan agar manfaatnya jauh lebih besar dari biaya yang dikeluarkan. Oleh sebab itu untuk kepentingan ilmiah perlu dilakukan kajian akademisnya berupa Analisis kelayakan Finansial. Berdasarkan analisis kelayakan keuangan   ,dapat  disimpulkan bahwa wisata air di Waduk jatigede Kabupaten Sumedang  memberikan manfaat yang lebih dibandingkan dengan biaya yang dikeluarkan . ini dapat dilihat dari hasil analisis net present value yang positif, internal rate of return yang lebih besar dari tingkat bunga bank serta benefit cost yang lebih besar dari satu. Kata Kunci: Kelayakan Finansial; Wisata Air.

Metode Pengumpulan dan Analisis Data : Lang Kah Vital Proses Penelitian

OpenAIRE

Suprapto, Agus .

2005-01-01

The process of data collection and. analysis is one of chains in scientific method that should be done in a research. This part later on will determine the right method in searching and analyzing a way in solving a problem. The data collected should be the ones which are relevant which the essence of research problems, so that the next interpreted data will eventually be concluded as valid. keywords: Pengumpulan data, analisis data,dan metode ilmiah

JRR-3 maintenance program utilizing accumulated maintenance data

International Nuclear Information System (INIS)

Izumo, Hironobu; Kato, Tomoaki; Kinase, Masami; Torii, Yoshiya; Murayama, Yoji

2007-07-01

JRR-3(Japan Research Reactor No.3) has been operated for more than 15 years after the modification, without significant troubles by carrying out maintenance such as the preventive maintenance (mainly time-based maintenance) for the safety-grade equipments and the breakdown maintenance for the non-safety-grade equipments. Unscheduled shutdowns causes by aged non-safety-grade equipments have been increasing, and the resources such as budgets have been decreasing year by year. In this situation, JRR-3 maintenance program was reviewed about safety, reliability and economic efficiency. This report offers the policy of the maintenance review and the future direction of maintenance programs. (author)

Principles of MONJU maintenance. Characteristic of MONJU maintenance and reflection of LWR maintenance experience to FBR

International Nuclear Information System (INIS)

Nakai, Satoru; Nishio, Ryuichi; Uchihashi, Masaya; Kaneko, Yoshihisa; Yamashita, Hironobu; Yamaguchi, Atsunori; Aoki, Takayuki

2014-01-01

A sodium cooled fast breeder reactor (FBR) has unique systems and components and different degradation mechanism from light water reactor (LWR) so that need to establish maintenance technology in accordance with its features. The examination of the FBR maintenance technology is carried out in the special committee for considering the maintenance for Monju established in the Japan Society of Maintenology (JSM). As a result of the study such as extraction of Monju maintenance feature, maintenance technology benchmark between Monju and LWR components and survey of LWR maintenance experience, it is clear that principles of maintenance are same as LWR, necessity of LWR maintenance experience reflection and points to be considered in Monju maintenance. The road map to establish a FBR maintenance technology in the technical aspect became clear and it is vital to acquire operation and maintenance experience of the plant to implement this road map, and to establish a fast reactor maintenance. (author)

Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

OpenAIRE

Setyo Budi

2017-01-01

Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil p...

ANALISIS KEAMANAN DATA PADA BLOCK CIPHER ALGORITMA KRIPTOGRAFI RSA

Directory of Open Access Journals (Sweden)

Fadhillah Azmi

2017-01-01

Full Text Available Komunikasi adalah proses dasar dari pertukaran informasi. Efektifitas komunikasikomputer secara umum adalah melalui internet atau beberapa saluran komunikasi lainnya.Tujuan utama tulisan ini adalah berdasarkan pada analisis hasil yang diberikan Weinermengatakan bahwa jika private key d digunakan dalam algoritma kriptografi RSA kurang darin292, maka sistem tersebut kurang aman. Di sini penulis menganalisa pada hasil yang diberikanoleh Weiner dan mencoba untuk meningkatkan range dari private key d sampai n0.5. Karena nadalah perkalian p dan q, yang mana bilangan relative prima. Sehingga mempengaruhi kinerjaenkripsi algoritma yang lebih aman.

ANALISIS SOAL JENJANG KOGNITIF TAKSONOMI BLOOM REVISI PADA BUKU SEKOLAH ELEKTRONIK (BSE BIOLOGI SMA

Directory of Open Access Journals (Sweden)

Aa Juhanda

2016-11-01

Penelitian ini bertujuan untuk menganalisis kemunculan soal jenjang kognitif Bloom Revisi pada Buku Sekolah Elektronik (BSE Biologi SMA. Subjek penelitian adalah 1.650 soal yang terdapat pada BSE Edisi 2009. Instrumen yang digunakan adalah lembar analisis dokumen yang di dalamnya memuat informasi seperti kode soal, soal, dan jenis tingkatan kognitif taksonomi Bloom Revisi. Analisis data dilakukan secara kuantitatif dan kualitatif. Hasil penelitian menunjukkan bahwa rerata persentase kemunculan cukup tinggi diperoleh pada soal yang mengembangkan keterampilan berpikir tingkat rendah (Lower-Order Thinking Skills yaitu soal C1 (mengingat sebesar 46,60% dan C2 (memahami sebesar 47,99%, meskipun untuk C3 (menerapkan persentasenya masih rendah (0,28%. Rerata persentase kemunculan soal yang mengembangkan keterampilan tingkat tinggi (Higher-Order Thinking Skills mulai dari soal C4 (menganalisis sampai dengan C6 (mencipta memiliki rerata persentase yang rendah. Oleh karena itu, kemunculan soal jenjang kognitif Bloom Revisi pada BSE khususnya yang mengembangkan Higher-Order Thinking Skills masih perlu untuk ditingkatkan.

Deteksi Kerusakan Batang Rotor Pada Motor Induksi Menggunakan Analisis Arus Mula Berbasis Hilbert Transform

Directory of Open Access Journals (Sweden)

Isti Qomah

2017-01-01

Full Text Available Kerusakan batang rotor merupakan salah satu jenis kerusakan pada motor induksi yang dapat menyebabkan masalah serius. Kerusakan tersebut dapat mencapai 5% - 10% dari seluruh kasus gangguan motor induksi. Oleh karena itu, perlu adanya diagnosis awal yang mendeteksi adanya gangguan pada rotor motor induksi, agar dapat dilakukan perbaikan lebih cepat dan tanggap sebelum terjadi gangguan yang lebih besar. Tugas Akhir ini membahas terkait teknik deteksi kerusakan batang rotor pada motor induksi dengan menggunakan analisis arus mula. Sistem yang digunakan berbasis  decomposition wavelet transform terlebih dahulu kemudian dilanjutkan dengan analisis berbasis hilbert transform sebagai perangkat pengolahan sinyal sehingga mampu mendeteksi motor dalam keadaan sehat atau mengalami kerusakan. Pengujian sistem dilakukan dalam beberapa kondisi, yaitu kondisi tanpa beban dan berbeban. Selain itu, kondisi yang diberikan adalah kecacatan mulai dai 1BRB hingga 3BRB. Hasil pengujian membuktikan bahwa decomposition wavelet transform dan Hilbert transform mampu mendeteksi perbedaan kondisi pada motor induksi normal ataupun rusak pada batang rotor.

Analisis Arus Kas Terkait Kebijakan Uang Kuliah Tunggal di Perguruan Tinggi Negeri Badan Hukum

Directory of Open Access Journals (Sweden)

Surtiati Surtiati

2017-05-01

Full Text Available The aims of the research were to analyze cash flow and compare tuition income in a State University with Legal Entity of “XYZ” for its first year TPB students (the First Common Year and of the first year until the fourth year before and after implementation of the single tuition fee system and formulate the management policies for the tuition income after the single tuition fee system. Analysis of cash flows consisted of cash ratio, quick ratio and current ratio. Paired t-test was used to analyze differences between single tuition fee income and non single tuition fee income. Based on the cash flow analysis, it is found that the University of “XYZ” has a liquid financial condition. The significant difference is, moreover, detected from the paired t-test analysis between single and non single tuition fee of total income from the first year student tuition. However, there is no difference detected when the analysis was conducted for total income from all four year tuitions. Management policies tuition income after the single tuition fee system payment delays should be minimized so that tuition fee funds can be completely collected. The allocation of fees to the faculty/department was originally based on the BPMP, and BPMK uses a tariff system so that cost per subject does not necessarily correspond with the needs. This is not in accordance with the single tuition fee system that is based on the unit cost. This means that the cost of the course is based on real needs, not based on the rates set.Keywords: cash flow analysis, state university with legal entity, single tuition feeABSTRAKPenelitian ini bertujuan menganalisis arus kas, mengkaji perbedaan penerimaan SPP S1 Reguler satu tahun pertama bagi mahasiswa TPB dan tahun pertama sampai tahun ke empat sebelum dan sesudah kebijakan UKT di PTN Badan Hukum “XYZ. Selanjutnmya, merumuskan kebijakan pengelolaan SPP S1 reguler sesudah UKT. Analisis arus kas terdiri dari rasio kas, rasio cepat

ANALISIS DEREPLIKASI UNTUK IDENTIFIKASI SENYAWA ANTIBAKTERI SPONGE Axinella sp. DARI PERAIRAN KEPULAUAN KARIMUNJAWA

Directory of Open Access Journals (Sweden)

Hedi Indra Januar

2009-06-01

Full Text Available Riset ini bertujuan untuk mengidentifikasi senyawa antibakteri pada Axinella sp. yang diambil dari kepulauan Karimunjawa dengan metode dereplikasi menggunakan LCMS (Liquid Chromatography Mass Spectrometer dan FT-MS (Fourier Transfer Mass Spectrometer. Data pola spektra massa dan LC-MS menunjukkan adanya tiga senyawa terbrominasi yang mungkin memiliki bioakfivitas antibakteri. Analisis massa akurat (limit kesalahan di bawah 20 ppm menggunakan FT-MS menemukan bahwa ketiga senyawa tersebut memliki monosotop negatif (M-H pada m/z 321,9931 [senyawa (a]; m/z 383,9089 [senyawa (b]; dan m/z 385,9249 [senyawa (c]. Analisis komposisi kimia dari besaran massa tersebut yang menggunakan Elemental Composition Calculator menemukan bahwa komposisi kimia dari ketiga senyawa tersebut adalah C11H10N5O2Br (a, C11H9N5Br2 (b dan C11H11Br2N5O (c. Penelusuran struktur kima yang didasarkan pada komposisi tersebut di database MarinLit 2008 (Database struktur kimia senyawa-senyawa dari biota laut menemukan bahwa ketiga senyawa tersebut merupakan hymeniadisine (a, 3-bromohymenialdiside (b, dan dibromophakelin (c.

Analisis interferensi T-DAB dan TV Analog pada pita Very High Frequency (VHF

Directory of Open Access Journals (Sweden)

Kasmad Ariansyah

2014-09-01

Full Text Available Kehadiran teknologi digital telah membawa perubahan di dalam berbagai aspek kehidupan, tak terkecuali di dunia penyiaran. Digitalisasi dibidang penyiaran diyakini dapat memberikan manfaat dalam hal efisiensi spektrum frekuensi radio. Berkaitan dengan penyiaran radio, Menteri  Komunikasi  dan  Informatika telah menetapkan DAB family sebagai standard penyiaran radio digital di Indonesia. Kajian dilakukan untuk mendapatkan jarak minimum yang diperlukan  antara sistem T-DAB dan TV analog sebagai solusi terhadap kemungkinan interferensi. Analisis dilakukan dengan bantuan SEAMCAT. Berdasarkan hasil analisis disimpulkan bahwa  kanal  A  T-DAB  merupakan  kanal yang paling rentan terhadap interferensi; Untuk mencapai probabilitas interferensi maksimum 5%, separasi geograpis minimum antara cakupan terluar TV analog kanal n dan transmitter terluar pada jaringan SFN T-DAB untuk kanal (n- 1D, nA, nB, nC berturut-turut adalah 220 Km, 290 Km, 145 Km dan  40  Km.  Sedangkan  untuk  kanal  nD  dan  (n+1A  dapat dioperasikan tanpa separasi geograpis dengan TV analog.

ANALISIS CURAH HUJAN PANTAI BARAT SUMATERA BAGIAN UTARA PERIODE 1994-2007

Directory of Open Access Journals (Sweden)

Indra Gustari

2009-07-01

Full Text Available Dari data curah hujan di pantai barat Sumatera bagian utara dilakukan analisis spektrum daya untuk mengetahui pola curah hujan di daerah tersebut, selanjut dilihat hubungannya dengan intensitas monsun,  Indian Ocean Dipole Mode (IODM dan El-Nino Southern Oscillation (ENSO. Hasil analisis menunjukkan bahwa pola curah hujan di pantai barat Sumatera bagian utara memiliki dua puncak dan sangat dipengaruhi oleh faktor cuaca dengan dengan osilasi satu tahunan (annual oscillation, dan setengah tahunan (semi-annual oscillation dan ditemukan hubungan yang kuat antara variabilitas monsun dan IODM. Pola hujan didaerah ini tidak memperlihatkan pengaruh ENSO.   The data of Rainfall in the west coast of northern Sumatera were analyzed through power spectrum analyzer to find out the rainfall pattern in that area and to look at the relationship between rainfall pattern and monsoon intensity, Indian Ocean Dipole Mode (IODM and El-Nino Southern Oscillation (ENSO. The result of this analysis shows that the main rainfall pattern in the west coast of northern Sumatera has two peaks and is very much influenced by the factor of weather with annual oscillation and semi-annual oscillation, there is a strong relationship between monsoon variability and IODM, and the influence of ENSO on the rainfall in this region is not significant.

Managed maintenance, the next step in power plant maintenance

International Nuclear Information System (INIS)

Butterworth, G.; Anderson, T.M.

1984-01-01

The Westinghouse Nuclear Services Integration Division managed maintenance services are described. Essential to the management and control of a total plant maintenance programme is the development of a comprehensive maintenance specification. During recent years Westinghouse has jointly developed total plant engineering-based maintenance specifications with a number of utilities. The process employed and the experience to date are described. To efficiently implement the maintenance programme Westinghouse has developed a computer software program specifically designed for day to day use at the power plant by maintenance personnel. This program retains an equipment maintenance history, schedules maintenance activities, issues work orders and performs a number of sophisticated analyses of the maintenance backlog and forecast, equipment failure rates, etc. The functions of this software program are described and details of Westinghouse efforts to support the utilities in reducing outage times through development of predefined outage plans for critical report maintenance activities are given. Also described is the experience gained in the training of specialized maintenance personnel, employing competency-based training techniques and equipment mock-ups, and the benefits experienced, in terms of improved quality and productivity of maintenance performed. The success experienced with these methods has caused Westinghouse to expand the use of these training techniques to the more routine skill areas of power plant maintenance. A significant reduction in the operating costs of nuclear power plants will only be brought about by a significant improvement in the quality of maintenance. Westinghouse intends to effect this change by expanding its international service capabilities and to make major investments in order to promote technological developments in the area of power plant maintenance. (author)

ANALISIS PENGARUH CUSTOMER RELATIONSHIP MANAGEMENT TERHADAP KEPUASAN PELANGGAN PADA PT TELKOMSEL DI MAKASSAR

OpenAIRE

ANANDA, RACHMA RESKY

2015-01-01

2015 Analisis Pengaruh Customer Relationship Management Terhadap Kepuasan Pelanggan Pada PT Telkomsel di Makassar Analysis of Customer Relationship Management Influence to Customer Satisfaction at PT Telkomsel in Makassar Rachma Resky Ananda Muh. Asdar Yansor Djaya Tujuan dari penelitian ini adalah untuk menganalisis pengaruh Customer Relationship (continuity marketing, one to one marketing dan partnering atau co-marketing) terhadap k...

KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

Directory of Open Access Journals (Sweden)

Ruby Vidia Kusumah

2015-09-01

Full Text Available Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap variasi strip hitam dan putih pada dasar badan oranye, jenis warna dianalisis menggunakan ImageJ 1.49s, persentase penutupan warna dilakukan dengan Adobe Photoshop CS5. Pola warna dikarakterisasi oleh strip hitam tebal, tipis, gelap, pudar, terputus, bergabung, serta strip putih normal, pelana, spot, melebar, dan terputus. Warna hitam alam dikarakterisasi oleh hue (H: 300-60º, saturation (S: 8%-56%, brightness (B: 3%-19%, sedangkan budidaya H: 300-23º, S: 9%-71%, B: 4%-20%. Warna oranye alam H: 19-33º, S: 88%-98%, B: 47%-85%, dan budidaya H: 14-29º, S: 86%-99%, B: 38%-82%. Warna putih alam H: 36-270º; S: 1%-13%, B: 66%-88%, dan budidaya H: 0-229º, S: 0%-14%, B: 55%-87%. Persentase penutupan warna badan didominasi warna oranye dengan rata-rata 45% untuk populasi alam dan 57% untuk populasi budidaya. Keragaan warna ikan clown Biak dapat diarahkan pada pembentukan strain misbar, picasso, spot (domino, dan onyx. Metode analisis gambar digital sangat potensial digunakan untuk analisis keragaan warna ikan hias.

Analisis Kelembagaan Rantai Pasok Telur Ayam Ras Peternakan Rakyat Di Jawa Barat

OpenAIRE

Sejati, Wahyuning K

2011-01-01

Dalam konteks pengembangan pasar komoditas dan peningkatan kesejahteraan peternak rakyat perlu dipahami secara baik karakteristik dan kelembagaan petani, pemasok, dan pasar. Tulisan ini bertujuan untuk menganalisis kelembagaan rantai pasok peternak-pemasok-pasar komoditas telur ayam ras yang meliputi: (1) identifikasi kelembagaan peternakan rakyat ayam ras petelur; (2) analisis kelembagaan rantai pasok komoditas telur; dan (3) antisipasi kelembagaan introduksi rantai pasok telur ayam ras pete...

ANALISIS SENSITIVITAS TURBULENSI ALIRAN PADA KANAL BAHAN BAKAR PWR BERBASIS CFD

Directory of Open Access Journals (Sweden)

Endiah Puji Hastuti

2015-04-01

Full Text Available Turbulensi aliran pendingin pada proses perpindahan panas berfungsi untuk meningkatkan nilai koefisien perpindahan panas, tidak terkecuali aliran dalam kanal bahan bakar. Program CFD (CFD=computational fluid dynamics, FLUENT adalah program komputasi berbasis elemen hingga (finite element yang mampu memprediksi dan menganalisis fenomena dinamika aliran fluida secara teliti. Program perhitungan CFD dipilih dalam penelitian ini karena selain akurat juga dapat memberikan visualisasi dengan baik. Penelitian ini bertujuan untuk memahami karakteristika perpindahan panas, massa dan momentum dari dinding rod bahan bakar ke pendingin secara visual, pada medan temperatur, medan tekanan, dan medan energi kinetika pendingin, sebagai fungsi dinamika aliran di dalam kanal, pada kondisi tunak dan transien. Analisis dinamika aliran pada kanal bahan bakar PWR berbasis CFD dilakukan dengan menggunakan sampel data reaktor PWR dengan daya 1000 MWe dengan susunan bahan bakar 17x17. Untuk menguji sensitivitas persamaan aliran yang sesuai dengan model aliran turbulen pada kanal bahan bakar dilakukan pemodelan dengan menggunakan persamaan k-omega (Ƙ-ω, k-epsilon (Ƙ-ε, dan Reynold stress model (RSM. Pada analisis sensitivitas aliran turbulen di dalam kanal digunakan model mesh hexahedral dengan memilih tiga geometri sel yang masing masing berukuran 0,5 mm; 0,2 mm dan 0,15 mm. Hasil analisis menunjukkan bahwa pada analisis kondisi tunak (steady state, terdapat hasil yang mirip pada model turbulen Ƙ-ε standard dan Ƙ-ω standard. Pengujian terhadap kriteria Dittus Boelter untuk bilangan Nusselt menunjukkan bahwa model Reynold stress model (RSM direkomendasikan. Analisis sensitivitas terhadap geometri mesh antara sel yang berukuran 0,5 mm, 0,2 mm dan 0,15 mm, menunjukkan bahwa geometri sel sebesar 0,5 mm telah mencukupi. Aliran turbulen berkembang penuh telah tercapai pada model LES dan DES, meskipun hanya dalam waktu singkat (3 s, model LES memerlukan waktu komputasi

ANALISIS BAURAN PEMASARAN KENDARAAN RODA TIGA MEREK KAISAR PADA PT KAISAR MOTORINDO INDUSTRI PEKANBARU

Directory of Open Access Journals (Sweden)

Bambang Suroto

2015-04-01

Full Text Available Abstrak: Banyaknya perusahaan atau operator yang melayani jaringan internet secara otomatis akan timbul suatu proses yang dinamakan pemasaran. Di dalam dunia usaha, pemasaran merupakan salah satu fungsi penting didalam suatu perusahaan, karena dalam pemasaran mencakup beberapa hal kegiatan penting yang kita kenal dengan marketing mix yang diantaranya adalah perencanaan produk (product, penetapan harga (price, program promosi (promotion, sangat penting dalam keberhasilan suatu perusahaan namun ada satu hal yang perlu diperhatikan dan perlu dianalisis apabila perusahaan menginginkan atau mempunyai daur hidup atau life cycle produk yang lebih lama, maka perusahaan harus melakukan analisis perilaku pelanggan. Selain kegiatan pemasaran yang sangat penting perusahaan juga tidak boleh mengabaikan apa yang dibutuhkan oleh seorang konsumen, faktor apa saja yang dapat merangsang pelanggan untuk melakukan pembelian suatu barang, serta mengapa konsumen mempunyai banyak kebutuhan dalam waktu yang relatif singkat dan tentunya hal itu semua menggambarkan arti penting sebuah kegiatan analisis perilaku konsumen. Keluhan yang dirasakan konsumen atau pelanggan adalah promosi yang diberikan atau ditawarkan terkadang sering tidak sesuai dengan kenyataan yang ada di lapangan, seperti akses internet yang lama, dan jaringan yang sering terputus karena adanya gangguan dan sistem perbaikan jaringan. Masalah dalam penelitian ini adalah faktor-faktor apakah yang menyebabkan tidak tercapainya target pemasaran pemasangan jaringan internet speedy pada PT.Kaisar Motorindo Industri Pekanbaru. Metode yang digunakan dalam penelitian ini adalah dengan menggunakan metode deskriptif, yaitu menggunakan analisis data kualitatif serta analisis data dengan menghubungkan antara teori dan permasalahan yang diteliti. Hasil penelitian diperoleh variabel produk, dalam hal ini merupakan kombinasi barang dan jasa yang ditawarkan oleh perusahaan kepada pasar sasaran terhadap pemasaran jaringan

Program integration of predictive maintenance with reliability centered maintenance

International Nuclear Information System (INIS)

Strong, D.K. Jr; Wray, D.M.

1990-01-01

This paper addresses improving the safety and reliability of power plants in a cost-effective manner by integrating the recently developed reliability centered maintenance techniques with the traditional predictive maintenance techniques of nuclear power plants. The topics of the paper include a description of reliability centered maintenance (RCM), enhancing RCM with predictive maintenance, predictive maintenance programs, condition monitoring techniques, performance test techniques, the mid-Atlantic Reliability Centered Maintenance Users Group, test guides and the benefits of shared guide development

Planeación de la producción mediante la programación lineal con incertidumbre: Uso del programa OR Brainware Decision Tools

Directory of Open Access Journals (Sweden)

Marcos Moya Navarro

2011-05-01

Full Text Available Cuando se utiliza la programación lineal para construir modelos de programación y control de la producción, es común asumir que todos los parámetros del modelo son conocidos y son ciertos. Sin embargo, esto no es frecuente en los problemas de la vida real. El objetivo de este trabajo es mostrar cómo se selecciona el mejor curso de acción en un plan de producción al combinar herramientas deterministas, como la programación lineal, con el análisis de decisiones terminales, tomando en cuenta criterios de elección no probabilistas y criterios de elección probabilistas en el análisis de decisiones. Para resolver el problema de programación lineal se presenta el programa OR Brainware Decisión Tools, el cual está completamente programado en la plataforma de Microsoft Office Excel a partir de la versión 2007.

Analisis pengaruh capital adequacy ratio (CAR) dan operational efficiency ratio (OER) terhadap return on assets (ROA) (Studi pada bank umum syariah devisa di Indonesia)

OpenAIRE

Maryadi, Eldi

2017-01-01

Tujuan dari penelitan ini adalah untuk menganalisis (1) perkembangan ROA, CAR dan OER pada bank umum syariah devisa di Indonesia. (2) CAR dan OER terhadap ROA pada bank umum syariah devisa di Indonesia periode 2009-2014. Data yang digunakan adalah data time series dari Laporan Keuangan tahunan Bank Umum Syariah Devisa di Indonesia periode 2009-2014, yaitu Bank BNI Syariah, Bank Mega Syariah, Bank Muamalat Indonesia, dan Bank Mandiri Syariah. Alat analisis yang digunakan adalah analisis deskri...

ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA

Directory of Open Access Journals (Sweden)

Andi Sofrany Ekariansyah

2015-06-01

Full Text Available ABSTRAK ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA. Kecelakaan yang diakibatkan oleh kehilangan pendingin (loss of coolant accident / LOCA dari sistem reaktor merupakan kejadian dasar desain yang tetap diantisipasi dalam desain reaktor daya yang mengadopsi teknologi Generasi II hingga IV. LOCA ukuran kecil (small break LOCA memiliki dampak yang lebih signifikan terhadap keselamatan dibandingkan LOCA ukuran besar (large break LOCA seperti terlihat pada kejadian Three-Mile Island (TMI. Fokus makalah adalah pada analisis small break LOCA pada reaktor daya maju Generasi III+ yaitu AP1000 dengan mensimulasikan tiga kejadian pemicu yaitu membukanya katup Automatic Depressurization System (ADS secara tak disengaja, putusnya salah satu pipa Direct Vessel Injection (DVI secara double-ended, dan putusnya pipa lengan dingin dengan diameter bocoran 10 inci. Metode yang digunakan adalah simulasi kejadian pada model AP1000 yang dikembangkan secara mandiri menggunakan program perhitungan RELAP5/SCDAP/Mod3.4. Dampak yang ingin dilihat adalah kondisi teras selama terjadinya small break LOCA yang terdiri dari pembentukan mixture level dan transien temperatur kelongsong bahan bakar. Hasil simulasi menunjukkan bahwa mixture level untuk semua kejadian small break LOCA berada di atas tinggi teras aktif yang menunjukkan tidak terjadinya core uncovery. Adanya mixture level berpengaruh pada transien temperatur kelongsong yang menurun dan menunjukkan pendinginan bahan bakar yang efektif. Hasil di atas juga identik dengan hasil perhitungan program lain yaitu NOTRUMP. Keefektifan pendinginan teras juga disebabkan oleh berfungsinya injeksi pendingin melalui fitur keselamatan pasif yang menjadi ciri reaktor daya AP1000. Secara keseluruhan, hasil analisis menunjukkan model AP1000 yang telah dikembangkan dengan RELAP5 dapat digunakan untuk keperluan analisis kecelakaan dasar desain pada reaktor daya maju AP1000. Kata kunci: analisis

Analisi comparativa della dieta di alcuni carnivori opportunisti (Vulpes vulpes, Martes foina, Meles meles in Europa

Directory of Open Access Journals (Sweden)

Anna Maria De Marinis

2003-10-01

Full Text Available L'ecologia alimentare della volpe, del tasso ed in misura minore della faina è stata ampiamente studiata in diverse aree comprese all'interno degli areali di queste 3 specie. La variazione geografica delle abitudini alimentari di questi carnivori definiti opportunisti è al contrario decisamente poco nota. Scopo del presente lavoro è la descrizione della variazione della dieta di faina, tasso e volpe attraverso l'Europa ed in secondo luogo l'analisi comparativa delle strategie alimentari adottate da questi carnivori. Sono stati analizzati 19 studi per la volpe, 11 per la faina e 23 per il tasso. Sono stati presi in considerazione soltanto gli studi della durata di almeno un anno nei quali la composizione della dieta, determinata tramite analisi delle feci, fosse espressa in percentuale di volume o biomassa e le categorie alimentari fossero dettagliatamente descritte. Gli studi sono stati divisi in gruppi in base alla regione climatica di appartenenza (mediterranea, centroeuropea, atlantica e boreale. Le categorie alimentari utilizzate nell'analisi della variabilità geografica sono: mammiferi, uccelli, anfibi, artropodi, lombrichi, altro animale, frutta, cereali, rifiuti. L'analisi delle componenti principali, condotta separatamente sulle 3 specie, ha consentito l'individuazione su di un grafico bidimensionale di due gruppi riferibili all'Europa centro-settentrionale ed alla regione mediterranea, con una percentuale di variabilità spiegata > 76% per ognuna delle 3 specie. La composizione della dieta del primo gruppo risulta caratterizzata da elevate percentuali di mammiferi e secondariamente uccelli per la volpe, uccelli ed altro animale per la faina e lombrichi, cereali ed anfibi per il tasso. La composizione della dieta nella regione mediterranea risulta invece caratterizzata da elevate percentuali di artropodi e frutta per tutte e 3 le specie di carnivori. L'analisi dicriminante ha consentito di differenziare gli studi condotti in ambiente

ANALISIS VARIABEL KEUANGAN YANG MEMPENGARUHI KEBIJAKAN DEVIDEN

Directory of Open Access Journals (Sweden)

Sumiadji -

2012-03-01

Full Text Available Penelitian ini dilakukan untuk menguji pengaruh variabel keuangan yang terdiri dari: rasio pro-fitabilitas (return on assets, likuiditas (cash ratio, rasio hutang (debt to equity ratio, market value (earnings per share, dan perputaran total aset (total assets turnover terhadap kebijakan dividen yang diproksikan dengan dividend payout ratio (DPR pada perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia tahun 2004-2008. Prosedur pemilihan sampel penelitian menggunakan purposive sampling sehingga menghasilkan 8 perusahaan yang memenuhi kriteria sampel. Data sekunder dikumpulkan dengan teknik dokumentasi bersumber dari Indonesian Capital Market Directory (ICMD, laporan keuangan, dan hasil Rapat Umum Pemegang Saham (RUPS. Teknik analisis yang digunakan dalam penelitian ini adalah analisis regresi linear berganda. Hasil penelitian ini adalah secara simultan variabel ROA, CR, DER, EPS dan TATO berpengaruh terhadap DPR. Secara parsial variabel yang mempengaruhi DPR adalah CR, EPS dan TATO. Varabel lainnya, yaitu ROA dan DER ditemukan tidak berpengaruh terhadap DPR. This research was conducted to examine the influence of the financial variables which consists of: return on assets (ROA, cash ratio (CR, debt to equity ratio (DER, earnings per share (EPS, and total asset turnover (TATO to the dividend policy that indicated by the dividend payout ratio (DPR of listed manufacturing company in Indonesia Stock Exchange  2004 to 2008. The sample selection procedure used was a purposive sampling so that it produced eight companies that met the sample criteria. Se-condary data was collected by the documentation technique were obtained from the Indonesian Capital Market Directory (ICMD, financial statements, and the results of the Annual General Meeting of Shareholders. The analysis technique used was multiple linear regression analysis. The research found that five variables of kind of ROA, CR, DER, EPS dan TATO simultaneously influence to dividend

Analisis Pengaruh Monetary Policy Shock Terhadap Jumlah Deposito Perbankan Islam Dalam Sistem Perbankan Ganda: Studi Kasus Indonesia Dan Malaysia

Directory of Open Access Journals (Sweden)

Ade Mutiah

2014-03-01

Full Text Available Tujuan dari penelitian ini adalah ingin menguji secara empiris, apakah perilaku nasabah perbankan Islam di Indonesia dan di Malaysia terpengaruh oleh kebijakan moneter yang dikeluarkan oleh bank sentral pada masingmasing negara. Selain itu, apakah negara dengan karakteristik ekonomi dan kebijakan yang hampir sama – Indonesia dan Malaysia -, akan menghasilkan perilaku nasabah terhadap deposito perbankan Islam yang sama atau tidak. Metode analisis yang digunakan dalam penelitian ini adalah yang pertama , metode ekonometrika VAR (Vector Auto Regression yang bila terjadi kointegrasi pada data yang stasioner di 1st difference akan dilanjutkan pada VECM (Vector Error Correction Models dan yang kedua, analisis elastisitas permintaan deposito perbankan Islam terhadap variabel-variabel yang diuji dalam penelitian ini pada periode Januari 2005 sampai dengan Desember 2009. Hasil dari penelitian ini menujukkan bahwa dalam jangka panjang variabel moneter di Indonesia berpengaruh secara signifikan terhadap deposito perbankan Islam. Berbeda dengan di Malaysia di mana variable moneter tidak berpengaruh secara signifikan terhadap deposito perbankan Islam. Begitupun hasil analisis elastisitas permintaan deposito perbankan Islam di kedua negara. Dengan demikian dapat disimpulkan bahwa deposito perbankan Islam di Indonesia lebih sensitif terhadap perubahan kebijakan moneter, dibandingkan dengan yang ada di Malaysia.JEL Classifications : E41, E52, G21.Keywords : Kebijakan Moneter; Deposito; Perbankan Islam; VECM; Elastisitas.

Analisis Highest and Best Use (HBU pada Lahan Jl. Gubeng Raya No. 54 Surabaya

Directory of Open Access Journals (Sweden)

Akmaluddin Akmaluddin

2013-03-01

Full Text Available Laju pertumbuhan penduduk dan tingkat perekonomian yang semakin meningkat di  kota-kota besar seperti Surabaya, bertolak belakang dengan  ketersediaan lahan yang terbatas. Selayaknya properti yang akan dibangun di atas suatu lahan dapat memberikan manfaat yang maksimal serta efisien agar hasilnya dapat dirasakan demi pembangunan wilayah tersebut. Oleh karena itu, perlu dilakukan perhitungan  penggunaan yang paling memungkinkan dan diizinkan dari suatu tanah kosong atau tanah yang  sudah dibangun, dimana secara fisik dimungkinkan, didukung atau dibenarkan oleh peraturan, layak secara keuangan dan menghasilkan nilai tertinggi. Dalam penelitian ini dilakukan analisis Highest and Best Use (HBU pada lahan di Jl. Gubeng Raya No. 54 Surabaya seluas 1.150 m2 yang direncanakan akan dibangun hotel. Lahan tersebut berpotensi untuk dikembangkan menjadi properti komersial seperti hotel, apartemen, perkantoran dan pertokoan. Analisis tersebut menggunakan tinjauan terhadap aspek fisik, legal, finansial dan produktivitas maksimumnya. Dari hasil penelitian ini didapatkan alternatif properti komersial hotel yang memiliki penggunaan tertinggi dan terbaik pada pemanfaatan lahan dengan nilai lahan Rp. 67.069.980,31/ m2.

ANALISIS SUMBER-SUMBER KEBERMAKNAAN HIDUP NARAPIDANA YANG MENJALANI HUKUMAN SEUMUR HIDUP

Directory of Open Access Journals (Sweden)

Siska Marliana

2012-04-01

Full Text Available Narapidana yang mendapat hukuman seumur hidup akan mengalami perubahan besar dalam kehidupannya, seperti keterbatasan dalam melakukan aktivitas, pekerjaan, kehidupan sosial bahkan dalam tujuan hidup. Kondisi tersebut akan  mengubah pandangannya mengenai makna dari hidupnya ataupun mengalami ketidakbermaknaan hidup. Fokus penelitian ini adalah analisis sumber-sumber kebermaknaan hidup pada narapidana yang divonis hukuman seumur hidup dengan mengacu pada konsep kebermaknaan hidup Viktor Frankl. Penelitian ini merupakan penelitian kualitatif dengan pendekatan studi kasus pada seorang narapidana di Lembaga Pemasyarakatan Klas 1 Sukamiskin Bandung yang sudah menjalani dua tahun masa hukuman dari vonis hukuman seumur hidup atas kasus pembunuhan. Teknik pengambilan data dilakukan dengan wawancara, observasi dan analisis dokumen. Hasil penelitian ini menunjukkan bahwa sumber-sumber kebermaknaan hidup bagi subjek adalah : 1.  Adanya nilai-nilai kreatif (creative values untuk dapat berkarya, bekerja, mencipta serta melaksanakan tugas dan kewajiban sebaik-baiknya. 2. Adanya nilai-nilai penghayatan (experiential values, yakni dengan cara memperoleh pengalaman tentang sesuatu atau seseorang yang bernilai bagi subjek. 3. Nilai-nilai bersikap (attitudinal values atas hukuman seumur hidup yaitu subjek memilih sikap menerima kondisi tersebut sebagai tanggung jawab yang harus dijalani akibat perbuatannya dan berusaha menikmati kehidupan di penjara dengan menjadikan penjara sebagai tempat untuk belajar menjadi manusia yang lebih baik. Kata Kunci: hukuman seumur hidup, sumber-sumber kebermaknaan hidup, creative values, experiential values, attitudinal values

TECHNICAL MAINTENANCE EFFICIENCY OF THE AIRCRAFT MAINTENANCE-FREE ON-BOARD SYSTEM BETWEEN SCHEDULED MAINTENANCES

Directory of Open Access Journals (Sweden)

A. M. Bronnikov

2017-01-01

Full Text Available The avionics concept of the maintenance-free on-board equipment implies the absence of necessity to maintain onboard systems between scheduled maintenance, preserving the required operational and technical characteristics; it should be achieved by automatic diagnosis of the technical condition and the application of active means of ensuring a failsafe design, allowing to change the structure of the system to maintain its functions in case of failure. It is supposed that such equipment will reduce substantially and in the limit eliminate traditional maintenance of aircraft between scheduled maintenance, ensuring maximum readiness for use, along with improving safety. The paper proposes a methodology for evaluating the efficiency of maintenance-free between scheduled maintenance aircraft system with homogeneous redundancy. The excessive redundant elements allow the system to accumulate failures which are repaired during the routine maintenance. If the number of failures of any reserve is approaching a critical value, the recovery of the on-board system (elimination of all failures is carried out between scheduled maintenance by conducting rescue and recovery operations. It is believed that service work leads to the elimination of all failures and completely updates the on-board system. The process of system operational status changes is described with the discrete-continuous model in the flight time. The average losses in the sorties and the average cost of operation are used as integrated efficiency indicators of system operation. For example, the evaluation of the operation efficiency of formalized on-board system with homogeneous redundancy demonstrates the efficiency of the proposed methodology and the possibility of its use while analyzing the efficiency of the maintenance-free operation equipment between scheduled periods. As well as a comparative analysis of maintenance-free operation efficiency of the on-board system with excessive

ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI KEPUASAN KONSUMEN BERBELANJA ONLINE DI PROVINSI PULAU JAWA

Directory of Open Access Journals (Sweden)

Januar Israhmawan Putra

2017-11-01

Full Text Available Penggunaan internet di Indonesia yang tumbuh dengan pesat diikuti dengan banyak ber - munculan situs e-commerce yang merubah budaya dan gaya berbelanja masyarakat menjadi serba online. Pertumbuhan pasar e-commerce ini harus dibarengi dengan pelayanan yang akan diberikan kepada konsumennya secara baik agar konsumen merasa puas ketika bertran - saksi kepada perusahaan. Tujuan penelitian ini yaitu untuk mengetahui faktor apa saja yang mempengaruhi kepuasan konsumen berbelanja online pada situs jual beli Lazada, Zalora, dan Mataharimall. Variabel independent yang digunakan dalam penelitian ini yaitu Website Design, Security, Information Quality, Payment Method, E-service Quality, Product Quality, Product Variety, Delivery Service dan variebel dependent adalah Customer Satisfaction. �e- �e- �e - sponden dalam penelitian ini adalah konsumen Lazada, Zalora, dan Mataharimall yang be - rada di wilayah Provinsi Jawa Barat, Jawa Tengah, dan Jawa Timur dengan jumlah responden sebanyak 400 orang. Teknik sampling yang digunakan adalah nonprobability sampling yaitu porposive sampling. Penelitian ini menggunakan metode kuantitatif dengan teknik analisis data regresi berganda dan teknik analisis deskriptif. Hasil peneltian ini menunjukan bahwa website design, information quality, product vaiety, delivery service berpengaruh signifikan terhadap kepuasan konsumen dalam berbelanja online.

Maintenance methods

International Nuclear Information System (INIS)

Sanchis, H.; Aucher, P.

1990-01-01

The maintenance method applied at the Hague is summarized. The method was developed in order to solve problems relating to: the different specialist fields, the need for homogeneity in the maintenance work, the equipment diversity, the increase of the materials used at the Hague's new facilities. The aim of the method is to create a knowhow formalism, to facilitate maintenance, to ensure the running of the operations and to improve the estimation of the maintenance cost. One of the method's difficulties is the demonstration of the profitability of the maintenance operations [fr

Interval of Routine Maintenance and Maintenance Performance: A Literature Review

Directory of Open Access Journals (Sweden)

Au-Yong Cheong Peng

2016-01-01

Full Text Available In high-rise residential buildings, the quality of facilities management services is significant to the normal operation of the facilities. Unfortunately, lack of concern towards building maintenance, especially preventive maintenance, happens in domestic housing industry in Malaysia. Majority of the maintenance operations of condominiums suffer from lack of planning, lack of proactive maintenance plan, and lack of proper implementation. Thus, this paper reviews the implementation of preventive maintenance strategy, routine maintenance in specific. An extensive review of literature published in 1987 to 2014 is performed for the purpose of this research. The publications are sourced from journal articles, conference proceedings and books. The literature analysis confirms that the routine maintenance of facilities and building services is vital and it can be influential towards the maintenance performance. Subsequently, a theoretical framework is developed, which shows the relationship between routine maintenance of building facilities & services and maintenance performance. The building facilities & services are divided into two categories. They are essential facilities & services that ensure the safety, health, habitability, and operability of buildings; while value-added facilities & services deal with property value, return on investment, and quality living of buildings. Based on the findings, a future research is proposed, which aims to identify the appropriate routine of maintenance for the facilities and services in high-rise residential buildings to improve the maintenance performance.

ANALISIS STRUKTUR AKTANSIAL DAN FUNGSIONAL DALAM VOYAGE AUCENTREDELA TERRE KARYA JULES VERNE

OpenAIRE

Ade Yolanda Latjuba, Dr. M.A

2017-01-01

Berdasarkan hasil analisis, maka dapat disimpulkan sebagai berikut: 1. Roman Voyage au centre de la terre menceritakan tentang Prof. Lidenbrock, Axel, dan Hans Bjelke melakukan perjalanan luar biasa menuju pusat bumi berdasarkan petunjuk dari Ame Saknussemm yang Axel dan si Professor dapatkan secara tidak sengaja terselip di dalam sebuah buku tua karya Snorre Tarlesson. 2. Prof. Lidenbrock, Axel dan Hans Bjelke memulai perjalanan mereka menuju pusat bumi dengan cara menuruni gunung bera...

ANALISIS SEGMENTASI PASAR PRODUK YOGHURT BERDASARKAN PERILAKU KONSUMEN PADA HYPERMART CABANG PANAKUKANG, MAKASSAR

OpenAIRE

-, ANDRIANI

2014-01-01

2014 v ABSTRAK Andriani. I311 04 049. Analisis Segmentasi Pasar Berdasarkan Perilaku Konsumen pada Hypermart Cabang Panakukang, Makassar. Dibawah Bimbingan Ir. Hastang, M.Si sebagai Pembimbing Utama dan Muh. Ridwan, S.Pt, M.Si. sebagai Pembimbing Anggota. Perkembangan dan peningkatan bisnis khususnya pada usaha peternakan akhir-akhir ini menunjukkan banyak peningkatan. Salah satu strategi yang dapat diterapkan dalam menunjang aktivitas pemasaran oleh perusahaan dalam memasarkan pr...

ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP

OpenAIRE

WIJAYA, AKBAR

2014-01-01

2014 ABSTRAK ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP Implementation Analysis of Tax Planning on Board Incoming Tax of Semen Tonasa Ltd. Pangkep Akbar Wijaya Amiruddin Darmawati Penelitian ini bertujuan untuk mengetahui tax planning yang dilakukan oleh PT Semen Tonasa Pangkep, dan untuk menganalisis penerapan tax planning yang dilakukan oleh PT Semen Tonasa Pangkep dengan undang-undang perpajakan yang berlaku. Data...

Analisi sui pigmenti di ceramica neolitica tramite tecniche Raman e LIBS

Directory of Open Access Journals (Sweden)

Cristina Fabbri

2007-04-01

Full Text Available I dati presentati in questo breve contributo provengono da uno studio condotto in collaborazione dal Dipartimento di Scienze Archeologiche dell’Università di Pisa e dall’Istituto per i Processi Chimico-Fisici di Fisica molecolare del CNR di Pisa. Le metodologie applicate sono basate sull’analisi integrata delle tecniche spettroscopiche Raman e LIBS già ampiamente utilizzate nel campo dei Beni Culturali; i metodi sono infatti essenzialmente non distruttivi, non richiedono di un pre trattamento del campione e l’acquisizione delle misure è immediata.

ANALISIS KUALITAS PELAYANAN PUBLIK PADA KANTOR CAMAT RIMBA MELINTANG KABUPATEN ROKAN HILIR

Directory of Open Access Journals (Sweden)

Tasril Tasril

2016-03-01

Full Text Available Abstrak : Kualitas pelayanan merupakan salah satu faktor yang menentukan kepuasan masyarakat. Pelayanan yang baik pada akhirnya akan mampu memberikan kepuasan kepada masyarakat. Tujuan penelitian ini adalah untuk menganalisis pelayanan publikyang dilakukan pada Kantor Camat Rimba Melintang Kabupaten Rokan Hilir. Objek penelitian ini adalah masyarakat yang melakukan pengurusan pada kantor Camat Rimba Melintang Kabupaten Rokan Hilir. Populasi dalam penelitian ini adalah masyarakat kecamatan Rimba Melintang yang melakukan pengurusan di kantor camat. Teknik pengambilansampel dilakukan dengan metode accidental sampling. Jumlah sampel yang diambil sebanyak 99 orang. Teknik pengumpulan data menggunakan kuesioner. Analisis data yang digunakan adalah deskriptif kualitatif. Hasil penelitian membuktikan bahwa kualitas pelayanan publik untuk variabel bukti fisik, kehandalan, ketanggapan, jaminan dan empati meyoritas responden menjawab tidak setuju(tidak baik terhadap pelayanan publik pada kantor Camat Rimba melintang Kabupaten Rokan Hilir. Kondisi ini menunjukkan jika kualitas pelayanan publik ditingkatkan seperti dalam hal kedisiplinan petugas/aparatur, kemampuan petugas/aparatur dalam proses pelayanan, ketepatan waktu dalam melakukan pelayanan, memberikan jaminan legalitas dalam pelayanan, melayani dengan tidak membeda-bedakan masyarakat dalam memberikan pelayanan maka masyarakat akan merasa puas dari pelayanan tersebut. Abstract : The quality of service is one of the factors that determine people’s satisfaction. Good Service will eventually be able to give satisfaction to nthe public. The purpose of this study is to analyze the public service performed at the district office of Rimba Melintang Kabupaten Rokan Hilir. The object of this study people who the maintenance in the district office of Rimba Melintang Kabupaten Rokan Hilir. Population in this research is the district community of Rimba Melintang Kabupaten Rokan Hilir who do the maintenance in

Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

Energy Technology Data Exchange (ETDEWEB)

Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

1993-12-31

Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

Energy Technology Data Exchange (ETDEWEB)

Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

1992-12-31

Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

Analisis Biaya, Volume, Laba sebagai Alat Bantu Perencanaan Laba pada Hotel Sedona Manado

OpenAIRE

Samahati, Ricky Budiman

2013-01-01

Manado sebagai kota pariwisata menyediakan sarana dan prasarana kepariwisataan termasuk jasa perhotelan. Hotel Sedona merupakan salah satu hotel yang ada di Kota Manado dan merupakan objek yang dipilih penulis dengan menggunakan data operasional penjualan yang terjadi pada tahun 2011 dan 2012. Tujuan penelitian ini yaitu untuk mengetahui titik break even point, jumlah volume penjualan pada tingkat laba yang direncanakan, serta tingkat margin of safety pada Hotel Sedona Manado. Metode analisi...

ANALISIS POTENSI PEMUNGUTAN PAJAK HOTEL DALAM RANGKA PENINGKATAN PENDAPATAN ASLI DAERAH KOTA MAKASSAR

OpenAIRE

-, MUHAMMAD TRY DHARSANA AMBO ALA DEPARTEMEN AKUNTANSI FAKULTAS EKONOMI DAN BISNIS UNIVERSITAS HASANUDDIN MAKASSAR 2017

2017-01-01

Analisis Potensi Pemungutan Pajak Hotel dalam Rangka Peningkatan Pendapatan Asli Daerah Kota Makassar Analysis of Hotels Tax Collection Potency in Makkasar???s Own-Source Revenue Increase Muhammad Try Dharsana Ambo Ala Andi Kusumawati Yulianus Sampe Tujuan penelitian ini adalah untuk mengetahui besar potensi pajak hotel dan seberapa jauh bentuk usaha yang di lakukan oleh pemerintah daerah dalam menggali potensi pajak hotel di kota Makassar. Untuk menghitung potensi, efektivi...

Analisis Juridis Pelaksanaan Penghapusan Piutang Terhadap Kredit Macet (Studi Pada PT. Bank Sumut)

OpenAIRE

Margareth Eka Purba

2009-01-01

Usaha pokok Bank adalah sektor perkreditan dan pendapatan bank yang terbesar adalah berasal dari sektor perkreditan. Kredit, baik konsumtif maupun produktif memang sudah mejadi target utama perbankan dalam meraih pendapatan, selain fee based income tentunya. Dengan demikian, kelebihan dana masyarakat yang bisa membuat bank memiliki dana idle yang akan lebih produktif lagi karena diberikan dalam bentuk kredit.Walaupun sudah dilakukan analisis kredit, dan kredit sudah dinyatakan layak untuk dib...

Perangkat Lunak Untuk Analisis Gaya Gelombang Di Laboratorium Lingkungan Dan Energi Laut, Jurusan Teknik Kelautan, Ftk-Its

Directory of Open Access Journals (Sweden)

Fendi Hidayat

2013-09-01

Full Text Available Laboratorium Lingkungan dan Energi Laut, Jurusan Teknik Kelautan, FTK-ITS sering digunakan untuk pengujian. Salah satunya menguji gaya mooring pada floating breakwater. Hal tersebut menjadi salah satu alasan untuk membuat suatu perangkat lunak dalam membantu dalam proses analisis gaya mooring tersebut. Perangkat lunak yang dibuat berfungsi untuk membantu proses kalibrasi sensor load cell LUB-B 5 to 50 KB dan melakukan analisis gaya gelombang. Metode yang digunakan dalam penelitian ini adalah dengan menggunakan regresi linier, korelasi linier, perhitungan varian, standar deviasi, dan hukum Newton yang kemudian disusun dengan menggunakan Microsoft Visual Studio 2008. Penyusunan perangkat lunak yang bernama FORYS ini memiliki tampilan antarmuka pengguna yang mudah dalam pemakaian. Perangkat lunak yang telah dibuat juga bersifat portable sehingga bisa digunakan di berbagai komputer atau laptop. Hasil pengujian yang telah dilakukan menghasilkan bahwa semakin besar gaya gelombang yang terjadi, maka semakin besar pula tegangan yang terjadi pada tali.  

EKSLUSI DAN INKLUSI PADA RUBRIK METROPOLITAN HARIAN KOMPAS: ANALISIS WACANA KRITIS BERDASARKAN SUDUT PANDANG THEO VAN LEEUWEN

Directory of Open Access Journals (Sweden)

Harry Andheska

2015-10-01

Full Text Available Penggunaan teori kritis sebagai alat pengkajian dalam penelitian ini disebabkan oleh adanya persoalan tentang penumpang kereta rel listrik (KRL yang sering melanggar aturan dengan menaiki atap kereta tersebut. Penelitian ini pada dasarnya lebih menekankan titik perhatiannya pada sosok penumpang KRL sebagai sosok yang senantiasa termajinalkan dalam kehidupan sosial. Kajian ini merupakan pendekatan kualitatif dengan metode analisis isi. Kajian ini juga terbatas hanya pada satu teks berita yang dimuat dalam satu rubrik metropolitan pada haian Kompas. Model analisis wacana yang digunakan adalah model Theo Van Leuween dengan tujuan untuk mendeteksi dan meneliti bagaimana para penumpang yang duduk di atap KRL dimarjinalkan posisinya dalam suatu wacana. Hasil penelitian ditemukan bahwa terdapat dua jenis eksklusi yang dilakukan, yakni pasivasi dan nominalisasi; sedangkan inklusi ada tiga jenis, yakni diferensiasi, abstraksi, dan identifikasi. Keterbatasan dalam kajian ini disebabkan karena faktor kajian yang hanya terfokus pada satu teks berita.

Analisis Pengaruh Kinerja Keuangan terhadap Alokasi Belanja Modal di Provinsi Jambi

Directory of Open Access Journals (Sweden)

Eko Indra Praza

2016-09-01

Full Text Available Abstract. This research aimed to analyze the financial performance of the District/ Municipality in Jambi Province and to determine the effect of financial performance either simultaneously or partially on capital expenditure. The data used in this research is a panel data comprising time series data is data in 2010 - 2013 and cross section data is data of 9 (nine District and 2 (two Municipality is located in the Province of Jambi. The analytical method used panel data regression analysis. The analysis showed that the financial performance of the District/ Municipality in Jambi Province is still relatively low as the PAD contribution to regional revenue is still small so transfer income still dominate the local revenue to finance most of the regional expenditure. The results of panel data regression using the Fixed Effect Model (FEM showed that the financial performance simultaneously significant effect on capital expenditure allocation of the District/Municipality in Jambi Province from 2010 to 2013 and partially Ratio Degree of Decentralization significant positive effect on the allocation of capital expenditure. Financial dependency ratio, Financial Independence Ratio and the ratio degrees contributions public enterprises significant negative effect on capital expenditure . Effectiveness ratio of PAD does not significantly influence the allocation of capital expenditure. Keyword: Financial Performance, Decentralization, Financial Independence,   Abstrak. Penelitian ini bertujuan untuk menganalisis kinerja keuangan Pemerintah Kabupaten/Kota di Provinsi Jambi dan untuk mengetahui pengaruh kinerja keuangan baik secara simultan maupun secara parsial terhadap alokasi belanja modal. Data yang digunakan dalam penelitian ini merupakan data panel yang terdiri dari data time series yaitu data tahun 2010 – tahun 2013 dan data cross section yaitu data 9 (sembilan Kabupaten dan 2 (dua Kota yang berada di Provinsi Jambi. Metode analisis yaitu analisis

Analisis Daya Saing untuk Meningkatkan Kualitas Layanan terhadap Pelanggan dengan Pendekatan CRM di CV. BLITZSPOT

Directory of Open Access Journals (Sweden)

Suryadi Muhammad

2017-04-01

Full Text Available CV. Blitzspot adalah perusahaan yang bergerak di bidang jasa penyediaan layanan internet (internet service provider, yang berkantor pusat di Komplek Padasuka Indah Ruko Blok A-1, Cimahi, Jawa Barat. Berdasarkan hasil wawancara dan hasil observasi pada data transaksi CV. Blitzspot, konsumen CV. Blitzspot yang melakukan transaksi tiap tahunnya selalu berkurang, hal ini dikarenakan konsumen sering membandingkan layanan-layanan yang ditawarkan oleh para pesaing CV. Blitzspot. Bila permasalahan tersebut belum teratasi, konsumen CV. Blitzspot akan menurun tiap tahunnya dan akan selalu berpindah ke pesaing CV. Blitzspot. Direktur Utama CV. Blitzspot ingin menganalisis daya saing untuk menentukan layanan-layanan yang akan diberikan kepada pelanggan CV. Blitzspot dan penentuan strategi untuk mempertahankan konsumen CV. Blitzspot.  Metode Analisis daya saing yang digunakan adalah Model Analisis Berlian Porter dan Metode Pengelompokkan Pelanggan yang digunakan adalah Metode LRFM. Berdasarkan hasil pengujian dan pembahasan yang telah dibuat, maka dapat ditarik kesimpulan bahwa Direktur Utama dapat menganalisis daya saing CV. Blitzspot dengan menggunakan Berlian Porter untuk meningkatkan kualitas layanan terhadap pelanggan CV. Blitzspot.

ANALISIS PENGUNGKAPAN SUSTAINABILITY REPORT PADA PERUSAHAAN NON-KEUANGAN TAHUN 2009-2013

Directory of Open Access Journals (Sweden)

Candri Puspita Marwati

2015-10-01

Full Text Available Penelitian ini bertujuan untuk menguji dan menganalisis pengaruh return on asset (ROA, likuiditas (current ratio, ukuran perusahaan (size, earning per share (EPS terhadap pengungkapan sustainability report. Sampel yang digunakan adalah perusahaan non-keuangan terdaftar di Bursa Efek Indonesia (BEI yang menerbitkan sustainability report sesuai standar GRI pada periode 2009-2013 dan diperoleh 12 perusahaan. Teknik analisis data menggunakan uji asumsi klasik: normalitas, multikolinearitas, autokorelasi dan heterokedastisitas. Uji hipotesis menggunakan analisis regresi berganda. Hasil penelitian ini menunjukkan bahwa ROA berpengaruh positif signifikan terhadap sustainability report, current ratio tidak mempengaruhi sustainability report, size memiliki pengaruh negatif dan signifikan terhadap sustainability report, dan EPS memiliki pengaruh negatif dan signifikan terhadap sustainability report.This study aims to examine and analyze the effect of return on assets (ROA, liquidity (current ratio, firm size (size, earnings per share (EPS on the disclosure of sustainability report. Sample are corporate non-financial listed on the Indonesia Stock Exchange (IDX and publishes a sustainability report according to GRI standard in the period 2009-2013 and obtained sample of 12 companies. Data were analyzed using classic assumption test: normality, multicollinearity, autocorrelation and heterokedastisitas. Hypothesis testing using multiple regression analysis. The results showed that, ROA significant positive effect on sustainability report. current ratio does not affect the sustainability report. size has a negative and significant impact on the sustainability report, and EPS has a negative and significant impact on the sustainability report.

Wind power in Mexico: simulation of a wind farm and application of probabilistic safety analysis; La energia del viento en Mexico: Simulacion de un parque eolico y aplicacion de analisis probabilistica de seguridad

Energy Technology Data Exchange (ETDEWEB)

Martin del Campo Marquez, C.; Nelson Edestein, P.F.; Garcia Vazquez, M.A. [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico)]. E-mail: cecilia.martin.del.campo@gmail.com; pnelson_007@yahoo.com; maiki27@yahoo.com

2009-10-15

The most important aspects of wind energy in Mexico, including the potential for generating electricity and the major projects planned are presented here. In particular, the generation costs are compared to those of other energy sources. The results from the simulation of a 100MW wind farm in the Tehuantepec Isthmus are also presented. In addition, the environmental impacts related to the wind farm in the mentioned zone are analyzed. Finally, some benefits of using Probabilistic Safety Analysis are discussed with respect to evaluating the risks associated with events that can occur in wind parks, being especially useful for design and maintenance of the parks and the wind turbines themselves. In particular, an event tree was developed to analyze possible accident sequences that could occur when the wind speed is too great. Also, fault trees were developed for each mitigating system considered, in order to determine the relative importance of the wind generator components to the failure sequences, in order to evaluate the yield of suggested improvements and the optimization of maintenance programs. [Spanish] Se presentan los aspectos mas importantes referentes a la energia eolica en Mexico, su potencial de aprovechamiento y los proyectos planeados. Se comparan sus costos de generacion electrica con los de otras fuentes de energia. Se presentan los resultados de la simulacion con el programa WindPro, de un parque eolico de 100 MW localizado en el Istmo de Tehuantepec. Asimismo, se analizan algunos de los impactos ambientales relacionados con la instalacion de paquetes eolicos en la zona mencionada. Finalmente, se discuten las ventajas que pueden aportar los analisis probabilisticas de seguridad para evaluar los riesgos asociados a eventos que pueden ocurrir en los parques eolicos, sino de los resultados de este analisis de utilidad para el diseno y mantenimiento de los parques y de los propios aerogeneradores. Especificamente se desarrollo un arbol de eventos con el

Analisis Kelayakan Finansial Usaha Budidaya Bambu

Directory of Open Access Journals (Sweden)

Husnul Khotimah

2015-12-01

Full Text Available Budidaya bambu diperlukan untuk menambah populasi bambu yang cenderung berkurang yang disebabkan oleh beralihnya fungsi lahan yang digunakan untuk pemukiman atau diganti dengan komoditi tanaman lain yang dianggap lebih menguntungkan. Sementara itu kebutuhan bahan baku bambu terus meningkat sejalan dengan pertumbuhan penduduk dan perkembangan kemajuan ilmu pengetahuan. Budidaya bambu bermanfaat selain untuk menjaga ketersediaan suplai juga untuk meningkatkan kualitas bambu untuk memenuhi permintaan pasar. Tulisan ini mengkaji analisis finansial dari penanaman bambu. Kajian finansial dibutuhkan untuk menunjukkan bahwa upaya penanaman atau budidaya bambu ini layak atau tidak secara finansial untuk dilakukan. Data yang digunakan adalah data hasil penelitian di perusahaan perkebunan bambu PT XYZ di Lampung. Hasil penelitian menunjukkan bahwa nilai NPV (Rp 36.644.364,08 lebih besar dari nol, Net B/C (2,56 lebih besar dari satu, IRR (11 % lebih besar dari suku bunga 6 %, serta payback period pada tahun ke-9 umur proyek 15 tahun. Berdasarkan kriteria indikator kelayakan finansial dapat disimpulkan bahwa usaha budidaya bambu layak secara finansial untuk diusahakan. Katakunci: Hasil Hutan Bukan Kayu (HHBK, budidaya bambu, studi kelayakan, analisis finansial   Financial analysis and feasibity study of bamboo cultivation  Abstract Bamboo cultivation is necessary to increase the population of bamboo clumps. The bamboo clumps tend to decrease due to the shift of used lands for residential or replaced by other crop comodities, which are considered more profitable. On the other hand, the need of bamboo for raw materials remain increase in line with population growth and the development of science. The important of the bamboo cultivation are to maintain the availability of its supply and to improve the quality of bamboo, which meet the market demands. This paper examined financial analysis of bamboo cultivation. Financial study was necessary to show whether

ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI INDEPENDENSI PENAMPILAN AKUNTAN PUBLIK

Directory of Open Access Journals (Sweden)

Ardiani Ika S.

2012-03-01

Full Text Available Tujuan dari penelitian ini adalah untuk menguji secara empiris faktor-faktor yang mempengaruhi independensi penampilan akuntan publik baik secara parsial dan simultan. Faktor-faktor tersebut adalah financial interests, hubungan bisnis dengan klien, pelayanan asuransi dan audit, hubungan antara klien atau yg diaudit dengan auditor, kompetisi antara Kantor Akuntan Publik (KAP, ukuran KAP dan audit fee. Populasi dalam penelitian ini adalah para auditor di akuntan publik di Semarang tahun 2009. Metode penyeleksian sampel yang digunakan adalah convenience sampling dan jumlah respondennya 35. Alat analisis yang digunakan adalah multiple regression analysis. Dimulai dengan analisis kuantitatif untuk mengetes validitas dan reabilitas. Kemudian dilanjutkan uji asumsi klasik termasuk normality, multicollinearity, and heteroscedastisity. Hasil menunjukkan bahwa 6 variabel yang sudah dikaji secara simultan dan partial tersebut mempunyai efek yang signifikan terhadap independensi penampilan akuntan publik dengan R square 0.749. The objective of this study is to test empirically the factors that influence the independence of public accountant appearance both partially and simultaneously. The factors cover financial interests, business relationships with clients, assurance services and audit services, the length of relationship between client or auditee and auditor, the competition between Public Accountan Offices (KAPs, the size of KAP, and audit fee. The population in this study was the auditors who worked in the public accountant’s office in Semarang in 2009. The sample selection method is a convenience sampling and the  number of  respondents are 35. The Analysis tools used is multiple regression analysis. It starts by applying quantitative analysis to test the validity and reliability. Then, it is continued by testing the classical assumptions which include normality, multicollinearity, and heteroscedastisity. The result shows that the six

Dove sta andando l'analisi musicale? Riflessioni sul VII EuroMac

Directory of Open Access Journals (Sweden)

Mario Baroni

2014-01-01

Full Text Available Come tutti i lettori della Rivista ormai sapranno, si è svolto a Roma dal 29 settembre al 2 ottobre di quest’anno, presso il Conservatorio di S. Cecilia, il settimo convegno europeo di analisi musicale (VII European Music Analysis Conference ossia VII EuroMac. Nel convegno, organizzato dal GATM e diretto da Giorgio Sanguinetti, sono state presentate 197 relazioni e svolti otto laboratori. Tutti i materiali sono stati riassunti in un volume (Programme and Abstract Book, Iter Edizioni di Subiaco curato da Egidio Pozzi e Antonio Cascelli.

Maintenance management for nuclear power plant 'Integrated valve maintenance'

International Nuclear Information System (INIS)

Gerner, P.; Zanner, G.

2001-01-01

The deregulation of Europe's power market does force many utilities, and especially nuclear power plant operators, to introduce extensive cost-cutting measures in order to be able to compete within this new environment. The optimization of plant outages provides considerable potential for raising plant availability but can also lower operating costs by reducing e.g. expenditure on maintenance. Siemens Nuclear Power GmbH, in cooperation with plant operators, is currently implementing new and improved service concepts which can have a major effect on the way in which maintenance will be performed in the future. Innovative service packages for maintenance in nuclear power plants are available which can be used to perform a time- and cost-effective maintenance. The concepts encompass optimization of the overall sequence from planning in advance to the individual measures including reduction of the scope of maintenance activities, identification of cost cutting potential and bundling of maintenance activities. The main features of these maintenance activities are illustrated here using the examples of outage planning and integrated valve maintenance. In nuclear power plants approx. 5000 valves are periodically preventively, condition-based or breakdown-based maintained. Because of this large number of valves to be maintained a high potential of improvements and cost reductions can be achieved by performing an optimized, cost-effective maintenance based on innovative methods and tools. Siemens Nuclear Power GmbH has developed and qualified such tools which allow to reduce service costs while maintaining high standards of safety and availability. By changing from preventive to predictive (condition-based) maintenance - the number of valves to be maintained may be reduced considerably. The predictive maintenance is based on the Siemens Nuclear Power GmbH diagnostic and evaluation method (ADAM). ADAM is used to monitor the operability of valves by analytical verification of

The maintenance management framework models and methods for complex systems maintenance

CERN Document Server

Crespo Márquez, Adolfo

2010-01-01

“The Maintenance Management Framework” describes and reviews the concept, process and framework of modern maintenance management of complex systems; concentrating specifically on modern modelling tools (deterministic and empirical) for maintenance planning and scheduling. It will be bought by engineers and professionals involved in maintenance management, maintenance engineering, operations management, quality, etc. as well as graduate students and researchers in this field.

Improving the TRIGA facility maintenance by predictive maintenance techniques

International Nuclear Information System (INIS)

Preda, M.; Sabau, C.; Barbalata, E.

1997-01-01

This work deals with the specific operation of equipment in radioactive environment or in conditions allowing radioactive contamination. The requirements of remote operation ensuring the operators' protection are presented. Also, the requirements of international standards issued by IAEA-Vienna are reviewed. The organizational withdraws of the maintenance activities, based on the standards and maintenance and repair directives still in force, are shown. It is emphasized the fact that this type of maintenance was adequate to a given level of technical development, characteristic for pre-computerized industry, but, at present, it is obsolete and uneconomic both in utilization and maintenance. Such a system constitutes already a burden hindering the efforts of maximizing the availability, maintenance, prolongation the service life of equipment and utilities, finally, of increasing the efficiency of complex installations. Moreover, the predictive maintenance techniques are strongly requested by the character of radioactive installations precluding the direct access in given zones (a potential risk of irradiation or radioactive contamination) of installations during operation. The results obtained by applying the predictive maintenance techniques in the operation of the double circuit irradiation loop, used in the TRIGA reactors, are presented

Industrial Maintenance Strategies

International Nuclear Information System (INIS)

Sajjad Akbar

2006-01-01

Industrial plants have become more complex due to technological advancement. This has made the task of maintenance more difficult. The maintenance costs in terms of resources and downtime loss are so high that maintenance function has become a critical factor in a plant's profitability. Industry should devote as much forethought to the management of maintenance function as to production. Maintenance has grown from an art to a precise, technical engineering science. Planning, organizing scheduling and control of maintenance using modern techniques pays dividends in the form of reduced costs and increased reliability. The magnitude and the dimension of maintenance have multiplied due to development in the engineering technologies. Production cost and capacities are directly affected by the breakdown time. Total operating cost including the maintenance cost plays an important role in replacement dimension. The integrated system approach would bring forth the desired results of high maintenance standards. The standards once achieved and sustained, would add to the reliability of the plan and relieve heavy stresses and strains on the engineering logistic support. (author)

Analisis Pengaruh Konsentrasi Gas LPG Menggunakan Sensor TGS 2610 Berbasis Mikrokontroler AVR ATMega8535

OpenAIRE

Nurhalimah

2011-01-01

Telah dilakukan analisis kuantitatif gas dalam LPG. Penelitian ini dilakukan untuk mengukur konsentrasi gas LPG terhadap sensor. Metoda yang digunakan untuk mengukur konsentrasi gas LPG yaitu sensor gas semikonduktor jenis TGS 2610 keluaran Figaro yang digunakan untuk mendeteksi keberadaan gas. Sementara yang menjadi pusat pengendalian dari seluruh alat yang dirancang digunakan mikrokontroler AVR ATMega8535. Selain itu sistem yang dirancang dilengkapi LCD sebagai tampilan nilai konsentrasi ga...

Analisis komoditas unggulan perikanan budidaya Kabupaten Pidie Jaya

Directory of Open Access Journals (Sweden)

Farok Afero

2015-06-01

Full Text Available Abstract. Snapper (Lates calcarifer, grouper (Epinephelus coioides, tiger shrimp (Penaeus monodon, vannamei shrimp (Litopenaeus vannamei and tilapia (Oreochromis niloticus are leading commodity worthly cultivated in Pidie Jaya. Bandar Baru and Tringgadeng an appropriate areas for black tiger shrimp while Jangka Buya and Ulim approriate areas for vannamei cultivation. AHP analysis showed black tiger shrimp is top priority based on the economic value while vannamei shrimp is top priority based on enterprise sustainability. Financial analysis of snapper, grouper, black tiger shrimp, vannamei shrimp and tilapia farming generated positive cash flow and NPV, IRR > 100%, the ratio of benefit to cost of production > 1,30 and payback period of investment costs  < 1 year, thus demonstrating the feasibility of cultivation of these leading commodities. Vannamei shrimp cultivation showed positive prospect as long the market offers premium price. Grouper and snapper had a positive outlook because high demand of high-quality fish in the international market. Keywords: Leading commodity; financial analysis; aquaculture; Pidie Jaya Abstrak. Komoditas kakap (Lates calcarifer, kerapu (Epinephelus coioides,udang windu (Penaeus monodon, udang vannamei (Litopenaeus vannamei dan nila (Oreochromis niloticus adalah komoditas unggulan yang layak dibudidaya di Kabupaten Pidie Jaya. Bandar Baru dan Tringgadeng merupakan kawasan yang layak untuk pengembangan komoditas udang windu sedangkan Jangka Buya dan Ulim layak untuk pengembangan komoditas udang vannamei. Analisis AHP menunjukkan komoditas udang windu menjadi prioritas utama untuk dikembangkan berdasarkan nilai ekonomi sedangkan udang vannamei menjadi prioritas utama berdasarkan keberlanjutan usaha. Analisis indikator keuangan budidaya kakap, kerapu, udang windu, vannamei dan nila menunjukkan usaha budidaya komoditas unggulan menghasilkan arus kas kumulatif dan NPV positif, nilai  IRR diatas 100%, rasio keuntungan

Knowledge based maintenance

Energy Technology Data Exchange (ETDEWEB)

Sturm, A [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

1998-12-31

The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

Knowledge based maintenance

Energy Technology Data Exchange (ETDEWEB)

Sturm, A. [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

1997-12-31

The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM

Directory of Open Access Journals (Sweden)

Dwi Agustina Kurniawati

2017-10-01

Full Text Available Maintenance system at UMKM ED Aluminum Yogyakarta is using preventive and corrective maintenance program, but the implementation of this program still have many problems. The problem occurs because there is no maintenance system program and the company doesn’t have Standard Operational Procedure (SOP in maintenance to overcome machine failures resulted in the increase of the downtime value. To cope the problems,  in this paper we used application of SOP and appropriate task maintenance selection using Maintenance Value Stream Map (MVSM method supported by Reliability Centered Maintenance (RCM. Beside task selected among all products that have been produced, there is one machine that gives the biggest profit to the company. The product is feet infusion. Kondia milling machine is one of machines produces the feet infusion that has the longest downtime which was 17,75 hour during January 2016 until October 2016. RCM consist of Failure Mode Effect Analysis (FMEA, Pareto diagram, decision worksheet RCM, whereas the MVSM describes the maintenance activity. Based on Pareto analysis, the critical components on the Kondia milling machine were the magnetic contactor, relay, fuse, cutter, dynamo and bearing. The result of RCM decision worksheet proposed the appropriate action for the critical components cares. The Standard Operational Procedure (SOP for the maintenance system on the operation of Kondia milling machine are suggested to the company for getting more significant outcome.

Analisis Film Horor Indonesia Produksi Tahun 2014 (Studi Kasus: Mall Klender dan Kamar 207

Directory of Open Access Journals (Sweden)

Dedi Sukatno Sembiring Meliala

2016-02-01

Full Text Available Abstrak Film horor erat kaitannya dengan tokoh antagonis yang menimbulkan ketakutan pada penonton dalam bentuk makhluk supranatural seperti hantu, roh jahat dan sebagainya. Karakteristik film dengan genre horor membuat penonton terbawa suasana dengan alur ceritanya yang menakutkan. Namun, beberapa dari film horor Indonesia menyajikan adegan-adegan yang kurang sopan bahkan tergolong asusila atau porno. Untuk itu, penelitian ini ingin melihat apakah terdapat konten pornografi pada film Mall Klender dan Kamar 207 yang merupakan film horor Indonesia terlaris di tahun 2014. Analisis dilakukan dengan melihat pandangan dan penilaian 30 responden dengan karakteristik yaitu penonton film horor Indonesia yang berusia 20-40 tahun. Berdasarkan hasil analisis, tidak didapatkan konten pornografi pada film Mall Klender dan Kamar 207. Adegan-adegan yang terindikasi sebagai konten pornografi ternyata masih dapat diterima oleh penonton sebagai adegan yang berada dalam batas kewajaran dan mendukung pembawaan suasana dan kesan dalam cerita yang disampaikan. Kata Kunci: film horror Indonesia, analisis konten, pornografi Abstract The horror film is closely related to the antagonist that causes fear for audience in the form of supernatural creatures such as ghosts, demons and so on. Characteristic of the horor film is to make the audience carried away with the scary plot. However, some of the existing Indonesian horror film presents scenes that classified as obscene or pornographic. Therefore, this study wanted to see if there are any pornographic content on the film Klender Mall and Room 207 is the best-selling Indonesian horror movie in 2014. The analysis was done by looking at the view and assessment of 30 respondents which are Indonesian horror movie goers aged 20-40 years. Based on the analysis, there is no founding of pornographic content on the film Klender Mall and Room 207. The scenes that indicated as pornographic content was still acceptable by the audience

Analysis system and remote monitoring of atmospheric discharges; Sistema de analisis y monitoreo remoto de descargas atmosfericas

Energy Technology Data Exchange (ETDEWEB)

Zabre Borgaro, Eric; Rodriguez Padilla, Ma. Consuelo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

A system for analysis and monitoring of atmospheric discharges (SAMDA (Sistema de Analisis y Monitoreo de Descargas Atmosfericas) (lightnings)) in an electronic device that subsequently transmits these data as automatic processing or by request of a user from a computer operating as a remote station, is described. Also, the characteristics of the SAMDA, its evolution, and the challenges encountered along the development of this project and comments on possible improvements to the equipment and data recordings of this nature, are described. [Espanol] Se presenta el sistema de analisis y monitoreo de descargas atmosfericas (SAMDA) utilizado en la deteccion y registro de descargas atmosfericas (rayos) en un equipo electronico que posteriormente transmite estos datos como procesamiento automatico o por peticion de un usuario desde una computadora, operando como estacion remota. Asimismo, se describen las caracteristicas del SAMDA, su evolucion, los retos encontrados a lo largo del desarrollo de este proyecto y comentarios sobre posibles mejoras a equipos y registros de datos de esta naturaleza.

Analysis system and remote monitoring of atmospheric discharges; Sistema de analisis y monitoreo remoto de descargas atmosfericas

Energy Technology Data Exchange (ETDEWEB)

Zabre Borgaro, Eric; Rodriguez Padilla, Ma Consuelo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

A system for analysis and monitoring of atmospheric discharges (SAMDA (Sistema de Analisis y Monitoreo de Descargas Atmosfericas) (lightnings)) in an electronic device that subsequently transmits these data as automatic processing or by request of a user from a computer operating as a remote station, is described. Also, the characteristics of the SAMDA, its evolution, and the challenges encountered along the development of this project and comments on possible improvements to the equipment and data recordings of this nature, are described. [Espanol] Se presenta el sistema de analisis y monitoreo de descargas atmosfericas (SAMDA) utilizado en la deteccion y registro de descargas atmosfericas (rayos) en un equipo electronico que posteriormente transmite estos datos como procesamiento automatico o por peticion de un usuario desde una computadora, operando como estacion remota. Asimismo, se describen las caracteristicas del SAMDA, su evolucion, los retos encontrados a lo largo del desarrollo de este proyecto y comentarios sobre posibles mejoras a equipos y registros de datos de esta naturaleza.

ANALISIS KENDALA POTENSIAL PENERAPAN TOTAL QUALITY MANAGEMENT HOTEL PLAZA SEMARANG

Directory of Open Access Journals (Sweden)

Hendrajaya -

2010-03-01

Full Text Available Penelitian ini bertujuan untuk menemukan faktor-faktor yang terbentuk dari kendala penerapan Total Quality Management (TQM, sebagai upaya untuk menganalisis masalah-masalah potensial dari penerapan TQM di Hotel Plaza, Semarang. Sampel dari penelitian ini sejumlah 65 karyawan Hotel Plaza, Semarang yang terdiri dari manajer dan staf. Teknik analisis menggunakan Faktor Analisis. Hasil penelitian menunjukkan, bahwa kendala potensial dari implementasi TQM dapat disimpulkan menjadi lima faktor, yaitu faktor inkonsistensi, visi-misi, transformasi budaya, manajerial dan manajemen kualitas. Penelitian ini memberikan rekomendasi bahwa peningkatan fungsi-fungsi korporat melalui optimalisasi kualitas sebagai strategi bisnis dan orientasi pada kepuasan konsumen dengan melibatkan seluruh anggota organisasi, akan menjadi dasar untuk memaksimalkan daya saing perusahaan dalam hal produk, layanan, SDM, lingkungan dan seluruh proses yang dapat mendukung upaya perbaikan produktivitas. This study aims to determine the constraint factors and to analyze the potential problems of TQM implementation of Plaza Semarang Hotel. The sample of 65 employees of TQM implementation of Plaza Semarang Hotel, consist of managers and staffs. Factor analysis is used to achieve the results of the potential constraint implementation of Total Quality Management which can be summarized into five factors, they are: the factor of inconsistencies, the factor of vision and mission, cultural transformation factors, managerial factors and the factors of quality management. In order to increase the corporate functions through the optimization of quality as a business strategy and to achieve customer satisfaction, this study suggests that all members of the organization should be involved by the company as on-going basis to maximize the competitiveness of the organization on products, services, human resources, environment and all processes that support productivity improvement.

Analisis Zona Permeabel Fluida Sistem Panas Bumi Gunungapi Slamet Berdasarkan Analisis Kerapatan Kelurusan Citra SRTM Dan Struktur Geologi

Directory of Open Access Journals (Sweden)

Sachrul Iswahyudi

2016-03-01

Full Text Available Keberadaan manifestasi panasbumi di sekitar Gunungapi Slamet tidak dapat dipisahkan dari zona-zona permeabilitas yang berkembang. Lokasi-lokasi lulus air tersebut (zona permeabel yang memungkinkan terbentuknya sirkulasi fluida tempat air masuk untuk mengisi reservoir panas bumi dan air keluar ke permukaan bumi sebagai manifesatasi mata air panasbumi di sekitar Gunungapi Slamet. Publikasi yang berupa hasil penelitian ini mencoba mengidentifikasi zona-zona permeabel tersebut berdasarkan anaslisis kerapatan kelurusan yang terekam dalam citra SRTM. Identifikasi kelurusan-kelurusan pada citra berdasarkan komponen-komponen interpretasi citra, yaitu tona, tekstur, pola, bentuk dan relief. Hasil analisis tersebut dikompilasi dengan data struktur geologi regional yang sebelumnya telah diidentifikasi dan data lapangan berupa manifestasi mata air panas. Lokasi-lokasi dengan kerapatan kelurusan yang tinggi pada citra SRTM umumnya bersesuaian dengan zona struktur geologi regional keberadaan manifestasi mata air panas. Daerah tersebut memanjang relatif utara-selatan di bagian barat dan timur-barat di bagian selatan peta. Daerah-daerah inilah yang merupakan daerah lulus air tempat fluida bersirkulasi membentuk sistem panasbumi Gunungapi Slamet.

Analisis Pengaruh Parameter Operasional dan Penggunaan Stabilizer terhadap Perilaku Arah Belok Mobil Toyota Fortuner 4.0 V6 SR (AT 4X4

Directory of Open Access Journals (Sweden)

Deva Andriansyah

2017-01-01

Full Text Available Salah satu tipe mobil yang diminati oleh masyarakat Indonesia yaitu Toyota Fortuner yang termasuk dalam kelas mobil SUV (sport utility vehicle. Dalam pengoperasiannya mobil SUV harus mampu memberikan keamanan dan kenyamanan bagi pengendaranya. Salah satu faktor penunjang dari segi keamanan mobil ini yaitu perilaku arah beloknya. Dengan harga jual yang relatif tinggi di Indonesia, diharapkan mobil ini dapat memberikan perilaku arah belok yang baik. Terdapat dua tahapan dalam peneltian ini yaitu tahap analisis dan uji jalan pada radius belok tetap, 10 meter. Pada tahap analisis dilakukan perhitungan berdasarkan analisa slip, skid, dan guling untuk mengetahui perilaku arah belok mobil dengan variasi pada parameter operasionalnya yaitu: jumlah penumpang, kecepatan, sudut belok, kondisi permukaan jalan, dan tekanan ban. Selain itu, analisis pengaruh penggunaaan stabilizer terhadap perilaku arah belok mobil juga dilakukan. Uji jalan dilakukan untuk mengetahui Koefisien Understeer (KUS dari mobil tersebut pada jalan aspal dan tanah dengan kondisi mobil tanpa dan menggunakan stabilizer. Hasil yang didapatkan dari uji jalan akan dibandingkan dengan hasil dari analisis perhitungan. Hasil penelitian ini menunjukkan bahwa mobil Toyota Fortuner mengalami kondisi belok paling baik ketika dinaiki oleh 2 orang penumpang dengan tekanan ban sebesar 35 Psi dan melintas pada jalan aspal karena kendaraan lebih sedikit mengalami oversteer dan memiliki (KUS positif terkecil serta tidak mudah mengalami skid. Penggunaan stabilizer pada mobil Toyota Fortuner tidak berpengaruh terhadap perilaku arah beloknya karena KUS yang dihasilkan pada uji jalan nilainya hampir sama yaitu 1,8045 dan 1,8115 pada jalan aspal serta 2,151 dan 2,1641 pada jalan tanah. Namun, penggunaan stabilizer bermanfaat untuk memperkecil sudut guling ketika mobil berbelok.

Analisis Faktor Pembentuk Ekuitas Merek Toyota dan Daihatsu di Indonesia (Studi Komparasi pada Masyarakat Bandung)

OpenAIRE

Sigiro, Cristine Afriani; Rachma Putri, Yuliani; Ilfandy Imran, Ayub

2016-01-01

Toyota dan Daihatsu merupakan dua merek otomotif (mobil) yang sangat fenomenal di kalangan masyarakat Indonesia. Produk dari kedua merek tersebut memiliki persamaan yang identik, namun Toyota memasarkan produknya lebih mahal dibandingkan Daihatsu. Tujuan penelitian ini untuk mengetahui perbandingan ekuitas merek Toyota dan Daihatsu menurut masyarakat Bandung. Penelitian ini menggunakan paradigma penelitian positivistik dengan metode penelitian studi komparatif melalui teknik analisis data yan...

Perencanaan Kegiatan Maintenance Dengan Metode Reability Centered Maintenance (Rcm) II

OpenAIRE

Rachmad Hidayat; Nachnul Ansori; Ali Imron

2010-01-01

Maintenance Activity Planning by Reability Centered Maintenance (RCM) II Method. This research discussmaintenance activity by using RCM II method to determine failure function risk at compresor screw. Calculation isgiven to magnitude optimum time maintenance interval by considering the cost maintenance and the cost reparation.From the research results with RPN points out that critical component that needs to get main priority in givemaintenance on compresor screw are bust logistic on timeworn...

Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

Directory of Open Access Journals (Sweden)

Nurul Dzakiya

2017-05-01

Full Text Available Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m, lempung pasiran (11-30 m dan lapukan batuan diorit (30-55 m yang berada di kedalaman berbeda. Ketebalan batuan di permukaan sekitar 225-231 meter berdasarkan penampang peta geologi dengan arah sebaran dari Barat Laut hingga Tenggara. Proses pelapukan dan alterasi di daerah ini intensif (alterasi argilik dengan jenis morfologi perbukitan intrusi terdenudasi dan dataran Alluvial.

ANALISIS FUNDAMENTAL MAKRO DAN INTEGRASI PASAR SAHAM DUNIA DENGAN BURSA EFEK INDONESIA

Directory of Open Access Journals (Sweden)

Luh Gede Sri Artini

2017-11-01

Full Text Available Penelitian ini merupakan gabungan dari penelitian sebelumnya mengenai hubungan antara harga saham dengan kinerja ekonomi makro, dan penelitian mengenai integrasi Pasar Modal internasional.Variabel ekonomi makro dalam penelitian ini dibatasi pada pertumbuhan PDB, tingkat suku bunga SBI dan nilai Kurs dolar Amerika terhadap Rupiah dan Indeks saham digunakan adalah Indeks Dow Jones, Indeks Saham Australia, Indeks Shanghai dan Indeks Singapura. Data dikumpulkan dari tahun 2011 sampai tahun 2015 secara bulanan dengan teknik analisis regresi linier dengan bantuan Statistical Package For Social Science (SPSS

TUGAS DAN WEWENANG PUSAT PELAPORAN DAN ANALISIS TRANSAKSI KEUANGAN (PPATK DALAM PEMBERANTASAN TINDAK PIDANA PENCUCIAN UANG

Directory of Open Access Journals (Sweden)

Johari Johari

2014-03-01

Full Text Available Tugas dan wewenang Pusat Pelaporan dan Analisis Transaksi Keuangan (PPATK terdapat di dalam Pasal 26 dan Pasal 27 Undang-Undang No. 25 Tahun 2003 tentang Tindak Pencucian Uang. Berdasarkan ketentuan tersebut, tugas dan wewenang PPATK tersebut bertujuan untuk mendeteksi terjadinya tindak pidana pencucian uang, dan membantu penegakan hukum yang berkaitan dengan pencucian uang, termasuk tindak pidana asal yang melahirkannya (predicate offences. Namun, Peranan PPATK akan berjalan secara efektif apabila aparat penegak hukum seperti Kepolisian, Kejaksaan, Pengadilan, Bea dan Cukai, para regulator seperti Bank Indonesia, Departemen Keuangan, Badan Pengawas Pasar Modal serta Penyedia Jasa Keuangan, industri perbankan, asuransi, perusahaan pembiayaan, dana pensiun, perusahaan efek, pengelola reksadana, media massa, masyarakat bekerjasama secara terorganisir dan terpadu dalam pemberantasan tindak pencucian uang di Indonesia. Dengan kewenangan yang dimilikinya, PPATK dapat mengejar hasil dari kejahatan, apabila hasil kejahatan tersebut dapat dikejar dan disita maka negara dengan sendirinya akan mengurangi tindak kejahatan itu sendiri. Kata kunci : Pencucian uang, tindak pidana pencucian uang (money laundering, kejahatan terorganisir, dan Pusat Pelaporan dan Analisis Transaksi Keuangan (PPATK.

Lean Maintenance Applied to Improve Maintenance Efficiency in Thermoelectric Power Plants

Directory of Open Access Journals (Sweden)

Orlando Duran

2017-10-01

Full Text Available Thermoelectric power plants consist of a set of critical equipment that require high levels of availability and reliability. Due to this, maintenance of these physical assets is gaining momentum in industry. Maintenance is considered as an activity that contributes to improving the availability, efficiency and productivity of each piece of equipment. Several techniques have been used to achieve greater efficiencies in maintenance, among which we can find the lean maintenance philosophy. Despite the wide diffusion of lean maintenance, there is no structured method that supports the prescription of lean tools applied to the maintenance function. This paper presents the experience gathered in two lean maintenance projects in thermoelectric power plants. The application of lean techniques was based on using a previously developed multicriterial decision making process that uses the Fuzzy Analytic Hierarchy Process (AHP methodology to carry out a diagnosis and prescription tasks. That methodology allowed the prescription of the appropriated lean techniques to resolve the main deficiencies in maintenance function. The results of applying such lean tools show that important results can be obtained, making the maintenance function in thermoelectric power plants more efficient and lean.

ANALISIS KELAYAKAN DAN SENSITIVITAS HARGA INPUT PADA USAHA BUDIDAYA IKAN LELE DALAM KOLAM TERPAL DI KOTA BANJARBARU PROVINSI KALIMANTAN SELATAN

Directory of Open Access Journals (Sweden)

Idiannor Mahyudin

2016-10-01

Full Text Available Salah satu kegiatan ekonomi berbasis sumberdaya hayati pada sektor perikanan adalah kegiatan budidaya ikan.  Tetapi dengan keterbatasan lahan yang dimiliki dan untuk memanfaatkan lahan pekarangan supaya bernilai produktif maka masyarakat Banjarbaru banyak mengusahakan budidaya ikan lele di kolam terpal. Penelitian ini bertujuan untuk (1 menganalisis layak atau tidaknya usaha budidaya ikan lele di kolam terpal; (2 menganalisis pengaruh perubahan harga input terhadap usaha budidaya ikan lele di kolam terpal; (3 mengetahui permasalahan yang dihadapi oleh pelaku usaha budidaya  ikan lele di kolam terpal di Kotamadya Banjarbaru. Penelitian ini menggunakan metode survei dan wawancara. Data yang dikumpulkan meliputi data primer dan data sekunder. Lokasi sampel ditentukan secara sengaja (purposive, yakni Kotamadya Banjarbaru. Wawancara dilakukan terhadap petani ikan  yang aktif mengelola kegiatan usaha budidaya  ikan lele di kolam terpal, yakni sebanyak 200 petani ikan.  Penetapan jumlah sampel dilakukan secara random mengingat populasi yang homogen. Analisis data untuk menjawab tujuan pertama, yakni menganalisis kelayakan investasi usaha budidaya ikan lele di kolam terpal , digunakan perhitungan pada kriteria investasi yang meliputi Net Present Value (NPV, Net Benefit Cost Ratio (Net BCR, Internal Rate of Return (IRR dan Payback Period.   Untuk menjawab tujuan kedua dilakukan pengujian terhadap hasil kelayakan usaha pada metode di atas dengan mempertimbangkan adanya kenaikan harga pakan. Selanjutnya untuk menjawab tujuan ketiga, yakni mengetahui permasalahan yang dihadapi pelaku usaha budidaya ikan lele di kolam terpal, digunakan analisis deskriptif dengan cara mengkaji data-data primer/sekunder dan selanjutnya memaparkannya secara tertulis. Hasil analisis kelayakan usaha diperoleh nilai NPV 12% sebesar Rp 96.600,081 > 0, nilai B/C 12% = 2,089 > 1 dan nilai IRR = ~ (tidak terhingga  > dari tingkat bunga berlaku. Dari hasil kelayakan usaha

Analisis Gameplay Game Genre Virtual Pet

Directory of Open Access Journals (Sweden)

Abi Senoprabowo

2015-02-01

Full Text Available Game adalah struktur interaktif yang membuat pemain berjuang menuju sebuah tujuan. Game dapat memberikan emosi dan mood, menghubungkan dengan orang latihan, sarana latihan, serta dapat memberikan edukasi. Salah satu game yang berkembang saat ini adalah game bergenre Virtual pet. Game virtual pet merupakan game simulasi memelihara sesuatu. Virtual pet memiliki gameplay yang menarik dan menyenangkan yang membuat pemain seolah-olah benar-benar memiliki binatang peliharaan mereka sendiri. Virtual pet dianggap oleh sebagian besar penggunanya dapat memberikan kegembiraan serta rasa kasih sayang karena tingkat interaksinya yang baik. Banyak pengembang game pemula yang mengembangkan genre ini sebagai game yang mereka buat karena kemudahaan dan tingkat penggunanya yang banyak. Akan tetapi banyak dari pengembang game pemula tidak memperhatikan tingkat keberlanjutan game virtual pet yang mereka buat sehingga membuat pemain cepat bosan. Pada penelitian ini, analisis game bergenre virtual pet yang sudah sukses dibuat seperti Zombigotchi, Tamagotchi Unicorn, dan Bird Land, diharapkan dapat membantu para pengembang game pemula agar mengetahui cara merancang dan mengembangkan game virtual pet dengan baik. Kata Kunci: game, gameplay, virtual pet

ANALISIS RESIDU PESTISIDA PIRETRIN DALAM TOMAT DAN SELADA DARI BEBERAPA PASAR DI JAKARTA

Directory of Open Access Journals (Sweden)

D. Mutiatikum

2012-10-01

Full Text Available Penggunaan pestisida untuk budidaya komoditi pertanian memungkinkan adanya residu pestisida dalam sayuran sehingga konsumen berisiko tercemar pestisida yang merupakan zat toksik  sehingga diperlukan pemantmwn kadar residu dalam sayuran terutama yang langsung dikonsumsi tanpa dimasak. Penetapan  residu pestisida dilakukan dengan menggunakan kromatografi gas (GC. Hasil analisis residu pestisida golongan peretrin dalam tomat dan selada yang disampling dari pasar induk, pasar tradisional. pasar swalayan dan hipermarket yang berada diwilayah Jakarta menunjukkan hasil yang negatif (tidak terdeteksi.

Maintenance management systems

International Nuclear Information System (INIS)

Rohan, M. de

1989-01-01

This paper is concerned principally with Maintenance Management systems and their effective introduction into organisations. Maintenance improvement is basically a problem of managing the maintenance department in the broadest sense. Improvement does not only lie in the area of special techniques, systems or procedures; although they are valuable tools, but rather in a balanced attack, carefully guided by management. Over recent years, maintenance systems have received the major emphasis and in many instances the selection of the system has become a pre-occupation, whereas the importance of each maintenance function must be recognised and good management practices applied to all maintenance activities. The ingredients for success in the implementation of maintenance management systems are summarised as: having a management committee, clear objectives, project approach using project management techniques and an enthusiastic leader, user managed and data processing supported project, realistic budget and an understanding of the financial audit requirements. (author)

Analisis Efektivitas Perangkat pada Program Desa Broadband Terpadu [Analysis of Device Effectiveness in Integrated Broadband Village Program

Directory of Open Access Journals (Sweden)

Hilarion Hamjen

2016-12-01

Full Text Available Pemerintah berkomitmen mendukung pertumbuhan e-commerce dan ekonomi digital di Indonesia untuk mencapai visi Indonesia 2020 sebagai negara ekonomi digital terbesar di Asia Tenggara. Secara fundamental diperlukan dukungan konektivitas nasional dari tingkat pusat sampai ke tingkat lokal, salah satunya melalui program KPU/USO yaitu program DBT (Desa Broadband Terpadu. Penelitian ini bertujuan untuk mengetahui efektivitas perangkat pada program DBT phase 1 dan keterkaitannya dengan konektivitas, dengan menggunakan metode analisis kepentingan kinerja dan uji statistik Chi square. Berdasarkan hasil penelitian diketahui bahwa efektivitas perangkat meliputi variabel kondisi, fungsi, pemeliharaan dan pemanfaatan rata-rata adalah 84,5 persen. Dengan nilai efektivitas tersebut diketahui bahwa keseluruhan variabel kondisi perangkat, fungsi dan pemanfaatannya tidak mempengaruhi konektivitas.  *****The Indonesian government has a strong commitment in supporting the growth of e-commerce and Digital Economy in Indonesia to attain Indonesia’s vision by 2020 as the largest digital economy nation in Southeast Asia. Fundamentally, the national connectivity supports from central level to local level are needed, where one of them comes from Integrated Broadband Village program. This research determines the effectiveness of devices in the DBT program and its correlation to the connectivity, by using importance-performance analysis method and Chi-square statistical test. It is known from the result that the effectiveness of devices, including condition, function, maintenance, and utilization variables, achieves 84.5 percent on average. The value shows that all mentioned variables have insignificant correlations to the connectivity.

ANALISIS BUTIR SOAPENGELOLAAN ARSIP INAKTIF DALAM UPAYA MENDUKUNG LAYANAN INFORMASI DI KANTOR ARSIP DAN PERPUSTAKAAN DAERAH KABUPATEN PURWOREJOL MATA PELAJARAN PENGANTAR ADMINISTRASI PERKANTORAN

Directory of Open Access Journals (Sweden)

Nita Rahmawati

2016-02-01

Full Text Available Penelitian ini menggunakan penelitian kualitatif. Sumber data dalam penelitian ini adalah Kepala Kantor Arsip dan Perpustakaan Daerah Kabupaten Purworejo, Kepala Bagian Tata Usaha, Kepala Seksi Akuisisi, Pengelolaan Arsip dan Dokumentasi,Staff Sub Tata Usaha,dan Arsiparis. Teknik pengumpulan data dalam penelitian ini menggunakan observasi, wawancara dan dokumentasi. Prosedur penelitian ini meliputi tahap pra-lapangan, tahap pekerjaan lapangan, dan tahap analisis data. Teknik analisis data meliputi pengumpulan data, reduksi data, penyajian data, dan menarik kesimpulan.Hasil penelitian menunjukkan bahwa pengelolaan arsip meliputi pencatatan arsip, pengendalian dan pendistribusian arsip, penyimpanan arsip, pemeliharaan arsip, pengawasan arsip, pemindahan dan pemusnahan arsip. Kendala yang ada antara lain masih adanya arsip yang menumpuk di ruang depo penyimpanan arsip, tidak adanya sanksi bagi peminjam arsip yang terlambat mengembalikan. Berdasarkan hasil penelitian ini dapat disimpulkan bahwa pencatatan arsip melalui kelengkapan arsip, pengendalian dan pendistribusian dengan tanggal terima, tanggal surat, paraf penerima. Sistem penyimpanan arsip yang digunakan adalah sistem penyimpanan kronologis (tanggal, pemeliharaan dengan membersihkan setiap sudut ruang arsip baik dengan kemoceng atau sapu dan memberikan kapur barus disela rak arsip juga melapisi arsip dengan kertas payung, pemindahan dan pemusnahan arsip dilakukan setiap periodik atau setahun sekali. Dengan demikian menyarankan : 1 mengoptimalkan ruang depo penyimpanan yang arsipnya masih ditumpuk dan belum diolah, 2 memberikan sanksi kepada peminjam arsip yang mengembalikan tidak tepat waktu. It was a qualitative research. The data source of the were the Head Office of Regional Library and Archive Office in Purworejo Regency, the Head of Administration, the Head Section of Procurement, Archives and Documentation Management,the Sub Staff of Administration, and the Archivist. The data were

Advanced maintenance research programs

International Nuclear Information System (INIS)

Marston, T.U.; Gelhaus, F.; Burke, R.

1985-01-01

The purpose of this paper is to provide the reader with an idea of the advanced maintenance research program at the Electric Power Research Institute (EPRI). A brief description of the maintenance-related activities is provided as a foundation for the advanced maintenance research projects. The projects can be divided into maintenance planning, preventive maintenance program development and implementation, predictive (or conditional) maintenance, and innovative maintenance techniques. The projects include hardware and software development, human factors considerations, and technology promotion and implementation. The advanced concepts include: the incorporation of artificial intelligence into outage planning; turbine and pump maintenance; rotating equipment monitoring and diagnostics with the aid of expert systems; and the development of mobile robots for nuclear power plant maintenance

Analisi dei cicli del mercato immobiliare: un applicazione sui dati italiani

Directory of Open Access Journals (Sweden)

Maurizio Festa!

2012-06-01

Full Text Available Utilizzando i dati italiani, sulla base dell'approccio teorico del ciclo "a nido d'ape" proposto da Janssen, Kruijt e Needham nel 1994, questo articolo propone un ulteriore contributo allo studio delle dinamiche del mercato immobiliare italiano. Utilizzando alcuni indicatori del mercato, si presentano i grafici del ciclo a nido d'ape per tutte le regioni e per le principali città. Tecniche di cluster analysis sono utilizzate per raggruppare le regioni che mostrano andamenti simili. L'obiettivo finale dell'analisi è quindi quello di esaminare il territorio nazionale in termini di sviluppo ed evoluzione del mercato delle abitazioni.

Maintenance Management Update.

Science.gov (United States)

Sternloff, Robert E.

1987-01-01

Current trends in park maintenance are overviewed, including maintenance impact statements, avoidance of cost through efficient use and national resource conservation, horticultural accomplishments that influence maintenance management, and vandalism prevention. (CB)

PENINGKATAN KEMAMPUAN ANALISIS MASALAH EKONOMI DENGAN MODEL PEMBELAJARAN PROBLEM BASED LEARNING (STUDI PADA SISWA KELAS X IIS 3 SMA 1 BAE KUDUS TAHUN AJARAN 2014/2015

Directory of Open Access Journals (Sweden)

Kurnia Norma Handayani

2015-02-01

Full Text Available atar belakang penelitian ini adalah karena kurangnya kemampuan analisis masalah ekonomi sehingga menyebabkan kurangnya pemahaman siswa akan materi dan berpengaruh terhadap hasil belajar siswa kurang optimal, selain itu karena metode pembelajaran yang digunakan tidak tepat yaitu menggunakan ceramah tanpa variasi sedangkan karakter materinya adalah teoritis dan membutuhkan analisis. Penelitian ini bertujuan untuk mengetahui peningkatan kemampuan analisis masalah ekonomi dengan model pembelajaran Problem Based Learning dan mengetahui penerapan model pembelajaran Problem Based Learning untuk meningkatkan kemampuan analisis masalah ekonomi. Subyek penelitian ini adalah siswa kelas X IIS 3 SMA 1 Bae Kudus. Penelitian ini merupakan penelitian tindakan kelas yang dilakukan dalam 2 siklus. Hasil penelitian ini diperoleh data kemampuan analisis siswa siklus I nilai rata-rata 73,94 dengan ketuntasan klasikal sebesar 52,94%, pada siklus II nilai rata-rata meningkat menjadi 82,29 dengan ketuntasan klasikal sebesar 82,35%, aktivitas siswa pada pembelajaran siklus I cukup dan pada siklus II meningkat menjadi sangat baik. The background of this research is the lack of knowledge in economic problems so students learning outcomes less optimal, moreover because the learning method that is used is not appropriate to use the oral speech without variation while the character is doctrinaire and needing analysis. This research aims to know improving the analysis ability on the subject economic problems with problem based learning model and how the use problem based learning can improving the analysis ability on the subject economic problems. The subject of this research is the class X IIS 3 SMA 1 Bae Kudus. This study is an action research conducted in two cycles. The research finding showed that analysis ability in learning cycle I average grade is 73,94 with percentage of classical completeness is 52,94%, in cycle II average grade increase to 82,29 with percentage of

ANALISIS FAKTOR KEHADIRAN DOSEN DI UNIVERSITAS X

Directory of Open Access Journals (Sweden)

Annisa Mulia Rani

2016-10-01

Full Text Available Aspek kualitas pekerjaan berkaitan langsung dengan waktu yang khusus digunakan dosen untuk mengembangkan kemampuan. Maka untuk merealisasikan kualitas dosen yang terbaik , pihak manajemen khusunya dekan membuat peraturan untuk kehadiran dosen adalah minimal 25 jam/minggu. Dengan peraturan ini diharapkan dosen dapat melaksanakan beban kerja dosen sebaik-baiknya. Peraturan ini tertulis dan tertuang pada SK Dekan No 20/2006 pada kampus X. Dengan Menggunakan Analisis faktor mencoba menemukan hubungan atar sejumlah variable-variabel yang awalnya saling independen satu dengan yang lain dimana variable penyebab kekurangan jam dosen datang/minggu adalah keluaraga, manajemen, hubungan social, fasilitas pengajaran, jarak/lokasi, kompensasi transport. Berdasarkan uji Bartley test dan Measure sample of adequate yang pertama maka dengan nilai sig 0.04 dan msa 0.540 . Dengan menggunakan metode principal component analysis maka pembentukan factor hanya ada 1 componen karena nilai eigen value yang mempunyai nilai diatas 1. Faktor pembentuk baru yaitu manajemen, kompensasi dan jarak menjadi satu component.

ANALISIS PSAK NO. 27 TENTANG AKUNTANSI PERKOPERASIAN DAN PENGARUHNYA TERHADAP KESEHATAN USAHA PADA KPRI

Directory of Open Access Journals (Sweden)

Muhammad Khafid

2012-03-01

Full Text Available Tujuan dari penelitian ini adalah untuk menganalisis kepatuhan penerapan PSAK 27 (Cooperative Accounting, dan untuk menganalisa dampak  kepatuhan penerapan PSAK 27 (Cooperative Accounting  pada pengoperasian kinerja KPRI di kota Semarang. Populasinya adalah 62 KPRI di kota Semarang, dan sempel yang digunakan adalah 29 KPRI. Metode pengumpulan datanya adalah dokumentasi dan kuesioner. Metode analisis data adalah analisis deskriptif  dan statistik inferensial. Hasil penelitian memperlihatkan bahwa KPRI di kotamadya Semarang dikategorikan cukup dan terbukti bahwa hipotesis menyatakan bahwa tingkat kepatuhan penerapan PSAK 27 berpengaruh terhadap pertumbuhan usaha. Abstract The purposes of this research are to analyze the implementation compliance of PSAK 27 (Cooperative Accounting, and to analyze the effects of implementation compliance of PSAK 27 (Cooperative Accounting on KPRI performance  in Semarang Municipality. The population are 62 KPRIs in Semarang.However, there are only twenty nine KPRIs become the samples. The methods for collecting the data are documentation and questionairre. Then, for analyzing the data, it requires descriptive analysis and inferential analysis. The results of study shows that KPRIs in Semarang Municipality are categorized as fair and hypothesis states that the level of implementation compliance of PSAK 27 is influencial to the business has successfully proven.Keywords:  cooperative accounting; compliance

ANALISIS POSISI BERSAING UNTUK MENENTUKAN STRATEGI PEMASARAN INDUSTRI KRIPIK TEMPE DI KOTA MALANG

Directory of Open Access Journals (Sweden)

Rusno Rusno

2014-11-01

Full Text Available Industri kripik tempe di desa Sanan Malang merupakan bagian dari UMKM mengalami perkembang-an yang cukup baik. Hingga akhir tahun 2013 kemarin berjumlah kurang lebih 65 pengrajin, bahkan saat ini Sanan sudah menjadi sentra industri kecil penghasil kripik tempe dan menjadi salah satu pro-duk unggulan kota Malang. Namun dalam perjalanannya industri ini banyak mengalami masalah diantaranya banyak pesaing yang terus masuk dalam bisnis ini. Hal ini mengakibatkan persaingan yang semakin ketat sehingga para pelaku harus dapat menentukan strategi untuk dapat memenangkan persaingan, maka Tujuan dalam penelitian ini adalah untuk mengetahui bagaimana posisi bersaing dan penetapan strategi pemasaran produsen kripik tempe di kota Malang. Jenis penelitian ini adalah confirmatory research. Sebagai populasinya adalah pengusaha kripik tempe yang berlokasi di kecamatan Blimbing kota Malang yang berjumlah 65 pemilik home industri. Sampel dilakukan dengan teknik Simple random sampling berjumlah 33 pengusaha industri kripik tempe. Pengambilan data dilakukan dengan kuesioner, dan teknik analisis data dengan teknik deskriptif dan tabulasi silang. Berdasarkan analisis data didapatkan hasil penelitian bahwa posisi bersaing industri kripik tempe di Sanan terdapat 4 cluster yang terbagi dalam : Cluster 1 (pemimpin pasar/market leader beranggota-kan 1 perusahaan. Cluster 2(penceruk pasar/market nicher beranggotakan 13 perusahaan, Cluster 3 (penantang pasar/market challenger beranggotakan 8 perusahaan dan cluster 4 (pengikut pasar /market follower beranggotakan 11 perusahaan. 

ANALISIS PERANCANGAN BUSINESS INTELLIGENCE BERBASIS SAAS CLOUD COMPUTING

Directory of Open Access Journals (Sweden)

I Gede Adnyana

2014-05-01

Full Text Available Persaingan bisnis yang ketat, mendorong setiap perusahaan menyusun strategi bisnis agar dapat bertahan dari para pesaing. Penyusunan strategi bisnis mutlak memerlukan informasi yang tepat dan akurat, pengolahan hingga analisis data yang menghasilkan informasi yang tepat dan akurat menjadi proses yang sangat penting. Business Intelligence (BI menawarkan solusi bisnis untuk menganalisis data dan memungkinkan suatu perusahaan untuk mengambil keputusan untuk meningkatkan keuntungan dan kinerja bisnis. Namun, BI mahal untuk diimplementasikan, memerlukan biaya pemeliharaan yang tidak sedikit dan infrastruktur yang kuat. Hal ini mendorong perusahaan mengurangi biaya tetapi masih memiliki teknologi yang tepat untuk memungkinkan mereka untuk membuat keputusan, mengidentifikasi peluang dan proaktif mengidentifikasi risiko yang dapat mempengaruhi bisnis. Konsep Software as a Service (SaaS Cloud Computing dapat menjawab tantangan yang dihadapi BI. Sebelum merancang BI berbasis SaaS perlu diketahui parameter-parameter evaluasi hingga kelebihan dan kekurangannya.

ANALISIS PERILAKU PENYUSUN ANGGARAN DALAM PERSPEKTIF KEAGENAN PADA KABUPATEN DAN KOTA DI PROVINSI SULAWESI SELATAN

OpenAIRE

ILMI, A. NURUL

2016-01-01

2016 Analisis Perilaku Penyusun Anggaran dalam Perspektif Keagenan pada Kabupaten dan Kota di Provinsi Sulawesi Selatan Analysis of Budget Compiler???s Behavior within the Agency Perspective in Regency and City of South Sulawesi Province A. Nurul Ilmi Mediaty Aini Indrijawati Penelitian ini bertujuan untuk menganalisis pengaruh perubahan Pendapatan Asli Daerah dan perubahan Dana Perimbangan terhadap perilaku oportunistik penyusun anggaran yang menjelaskan mengenai hubungan k...

Analisis Peranan Franchisor Terhadap Suksesnya Bisnis Franchise Pada Mc. Donald’s Cabang Ring Road Medan

OpenAIRE

Simarmata, Leonardo

2012-01-01

Tujuan penelitian ini adalah untuk mengetahui dan menganalisis peranan franchisor dalam promotion, support service, training, control system dan communication terhadap suksesnya bisnis franchise pada Mc Donald’s Cabang Ring Road Medan. Pengumpulan data primer diperoleh dengan cara memberikan daftar pertanyaan (questionaire) dan melakukan wawancara (interview) secara mendalam (depth interview) kepada pemilik usaha M. Donald’s Cabang Ring Road Medan. Teknik analisis data penelitian ini ad...

Instrumentation maintenance

International Nuclear Information System (INIS)

Mack, D.A.

1976-09-01

It is essential to any research activity that accurate and efficient measurements be made for the experimental parameters under consideration for each individual experiment or test. Satisfactory measurements in turn depend upon having the necessary instruments and the capability of ensuring that they are performing within their intended specifications. This latter requirement can only be achieved by providing an adequate maintenance facility, staffed with personnel competent to understand the problems associated with instrument adjustment and repair. The Instrument Repair Shop at the Lawrence Berkeley Laboratory is designed to achieve this end. The organization, staffing and operation of this system is discussed. Maintenance policy should be based on studies of (1) preventive vs. catastrophic maintenance, (2) records indicating when equipment should be replaced rather than repaired and (3) priorities established to indicate the order in which equipment should be repaired. Upon establishing a workable maintenance policy, the staff should be instructed so that they may provide appropriate scheduled preventive maintenance, calibration and corrective procedures, and emergency repairs. The education, training and experience of the maintenance staff is discussed along with the organization for an efficient operation. The layout of the various repair shops is described in the light of laboratory space and financial constraints

Systematic maintenance analysis with decision support method and tool for optimizing maintenance programme

International Nuclear Information System (INIS)

Laakso, K.; Simola, K.; Dorrepaal, J.; Skogberg, P.

1999-01-01

This report describes an approach to evaluate the effectiveness of test and maintenance programs of technical systems used during several years. The method combines an analysis of the historical data on faults and repairs with an analysis of the history of periodic testing and preventive maintenance action programs. The application of the maintenance analysis from the methodological point of view in the reliability centered maintenance (RCM) project for Barsebaeck nuclear power plant is described. In order to limit the analysis resources, a method for ranking of objects for maintenance analysis is needed. Preliminary suggestions for changes in maintenance action programs are based on signals from simple maintenance indicators and qualitative analysis of underlying data on failures and maintenance. To facilitate generation of maintenance indicators, and make the maintenance analysis more efficient, a powerful and suitable data treatment tool is needed for analysis of the work order history. In the final maintenance decisions, additional decision criteria must be taken into account, and thus a more formal decision analysis is often needed for decision support. (au)

ENCAPAI SUMBER DAYA MANUSIA UNGGUL (ANALISIS KINERJA DAN KUALITAS PELAYANAN

Directory of Open Access Journals (Sweden)

Ketut Sudarma

2012-03-01

Full Text Available Penelitian ini  bertujuan untuk menganalisis pengaruh kemampuan individu, kepuasan kerja, komitmen organisasi terhadap kinerja dan kinerja terhadap kualitas pelayanan. Sampel penelitian berjumlah 76 orang. Teknik pengambilan sampel menggunakan proportional random sampling. Variabel penelitian terdiri dari kemampuan individu, kepuasan kerja, komitmen organisasi, dan kinerja serta kualitas pelayanan  Analisis data menggunakan regresi dua tahap. Hasil penelitian menunjukkan bahwa kemampuan individu, kepuasan kerja dan komitmen organisasi mempunyai pengaruh positif signifikan terhadap kinerja dan kinerja berpengaruh positif signifikan terhadap kualitas pelayanan. Ini berarti semakin meningkat kinerja, maka semakin meningkat juga kualitas pelayanan. Dari hasil analisis deskriptif persentase tampak secara rata-rata  semua variabel penelitian  menunjukkan kategori baik, namun pada aspek-aspek tertentu pada masing-masing variabel masih terdapat kekurangan. Hasil penelitian ini diharapkan dapat menjadi masukan bagi pimpinan dalam meningkatkan kinerja dan kualitas pelayanan. Upaya perbaikan dimulai dari peningkatan kemampuan melalui pendidikan dan latihan, monitoring pelaksanaan kerja secara rutin, menumbuhkan komitmen kerja dan perbaikan standar operasi prosedur.The aim of the study is toanalyze the influence of individual abilities, job satisfaction, organizational commitment to performanceand performance againstservice quality. This samplingmethod is using 76 samples by the proportionalrandom sampling techniques. Variables consisted of individual ability, job satisfaction, organizational commitment, and performance andservice qualitydata analysisusingtwo-stageregression. The results showedthat theability of individuals, job satisfaction and organizational commitment had asignificant positive effecton performance and the performance ofa significant positive effecton quality of service. It means the higher performance, the higher service

With a re-engineering of maintenance to a profitably oriented maintenance

International Nuclear Information System (INIS)

Angelevska, Silvana; Jolevski, Tome

2000-01-01

This paper presents an overview of effectiveness of the profit centered maintenance as a contemporary way of the maintenance management concept. Such redesign of a maintenance procedure results in significant gains in cost reduction and increase of the profitability and competitiveness of energy. The business process re engineering - a modern management control theory that is important aspect of the profit centered maintenance is summarized

Predictive maintenance: A new approach in maintenance of nuclear power plants

International Nuclear Information System (INIS)

Benvenuto, F.; Ferrari, L.

2005-01-01

The maintenance services for a Nuclear Power Plant are in general aimed at reaching the following goals: - Increase component availability and consequently decrease intervention frequency; - Reduce unexpected costs from unexpected repairs; - Progressively decrease the time of each intervention; - Improve the spare parts supply efficiency; - Improve spare parts and consumable warehouse managing; - Decrease maintenance costs. Most of the currently used maintenance activities refer to run-to-failure or preventive approaches: - Run-to-failure or Corrective Maintenance means that work is only carried out when a component or system is faulty and unable to perform its critical function. Non critical components such as filters or components with spare may be maintained in this way; - Preventive or Scheduled Maintenance involves a regular pre-set schedule programme of maintenance work. Programme outlined by the manufacturer of the component in question based on the design life of the component and based on past experience by operation. One step further than Preventive Maintenance is represented by Predictive Maintenance. Whereas Preventive Maintenance bases its schedules on past performance data, a predictive system acquires condition data from the machine to be maintained whilst the machine is in operation. The information obtained from this analysis indicates the condition in real time, provides a diagnosis of wear and shows any trend towards critical conditions. Predictive maintenance mainly consists of the following interventions: - Lubricant analysis; - Collection / analysis of functional parameters, such as motor absorption, flow rate, pressure, temperature, noise, vibration of rotating equipment, thermal efficiency, etc; - Periodical test of lifting systems; - Other operations to acquire sensitive equipment parameters. Predictive Maintenance can reduce the accidental intervention and extend the components life, and, in the end, is increasing the global availability

Assessing maintenance contracts when preventive maintenance is outsourced

International Nuclear Information System (INIS)

Wu Shaomin

2012-01-01

In some companies, corrective maintenance is conducted in-house but preventive maintenance might be outsourced. This raises a need to optimise some parameters such as the number of contracts from a perspective of the equipment owner. This paper considers a maintenance policy for such a situation, analyses the roles of the parameters in a PM model, proposes approaches to defining bonus functions, and finally discusses special cases of both the PM policy and the bonus function. Numerical examples are also given to explore the impact of parameters on the expected lifecycle cost rate.

Analysis and control of erosion by solid particles in the elements of the flow system of steam turbines; Analisis y control de erosion por particulas solidas en los elementos del sistema de flujo de turbinas de vapor

Energy Technology Data Exchange (ETDEWEB)

Mazur Czerwiec, Zdzislaw; Campos Amezcua, Alfonso; Campos Amezcua, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2010-07-01

The analysis of erosion by solid particles is presented of different elements of the flow channel of the steam turbines that operate in Mexico: nozzles, stop valves, blade bosses, labyrinth seals and rotor disc; using tools of of Computational Fluid Dynamics (CFD). In these main elements of turbines a strong problem of erosion was registered that threatens the reliable operation of the turbines, its availability and its optimal yield. With base on the results of the numerical analyses, the design modifications of the different elements were developed from the flow channel of the steam turbines, in order to reduce the erosion and thus diminishing the energy losses and increasing the steam turbine efficiency. This work presents the main benefits that the Thermoelectric Power Plants obtain with the reduction of the erosion by solid particles that affect the critical components of steam turbines: extension of the period between maintenance, replacement of components, reduction of operation and maintenance costs of the turbines, and extension of the useful life of the main components. [Spanish] Se presenta el analisis de erosion por particulas solidas de diferentes elementos del canal de flujo de las turbinas de vapor que operan en Mexico: toberas, valvula de paro, tetones de los alabes, sellos de laberinto y disco del rotor; utilizando herramientas de Dinamica de Fluidos Computacional (DFC). En estos elementos principales de turbinas se registro un fuerte problema de erosion que amenaza la operacion confiable de las turbinas, su disponibilidad y su rendimiento optimo. Con base en los resultados de los analisis numericos, se desarrollaron las modificaciones de diseno de los diferentes elementos del canal de flujo de las turbinas de vapor, con el proposito de reducir la erosion y asi, disminuir las perdidas de energia e incrementar el rendimiento de las turbinas de vapor. Este trabajo presenta los principales beneficios que obtienen las Centrales Termoelectricas con la

Managing nuclear maintenance

International Nuclear Information System (INIS)

Anon.

1990-01-01

For utilities operating nuclear powerplants, the rules of the game continue to change. Conflicting regulatory pressures and a tougher competitive environment will make management's job more complicated and difficult in the 1990s. Dealing with these pressures successfully requires greater attention to maintenance effectiveness. Utilities can help shape their future environment by developing a well-planned strategy to guide their actions. Parts of the strategy that are discussed include developing a sound maintenance philosophy, selecting a service company, radiation exposure, and managing spare parts. This article also addresses the Swedish experience in maintenance, German philosophy regarding maintenance and the current maintenance practices of the Electricite de France

AIRCRAFT MAINTENANCE HANGAR

Directory of Open Access Journals (Sweden)

GEAMBASU Gabriel George

2017-05-01

Full Text Available The paper presents the maintenance process that is done on an airplane, at a certain period of time, or after a number of flight hours or cycles and describes the checks performed behind each inspection. The first part of research describes the aircraft maintenance process that has to be done after an updated maintenance manual according with aircraft type, followed by a short introduction about maintenance hangar. The second part of the paper presents a hangar design with a foldable roof and walls, which can be folded or extended, over an airplane when a maintenance process is done, or depending on weather condition.

Maintenance Business Plans.

Science.gov (United States)

Adams, Matt

2002-01-01

Discusses maintenance business plans, statements which provide accountability for facilities maintenance organizations' considerable budgets. Discusses the plan's components: statement of plan objectives, macro and detailed description of the facility assets, maintenance function descriptions, description of key performance indicators, milestone…

North American nuclear maintenance best practices compared to Japanese utility maintenance practices

International Nuclear Information System (INIS)

Harazim, M.L.; Ferguson, B.J.

2003-01-01

The purpose of this paper is to compare the best practices in North America concerning Preventive Maintenance, Predictive Maintenance and Reliability Centered Maintenance (RCM) or Preventive Maintenance Optimization (PMO) with the time-directed maintenance philosophies utilized by Japanese utilities, and how the Japanese utilities are considering (and some have begun) adopting North American ways of doing business. Preventive Maintenance Living Programs are also discussed, along with the Institute of Nuclear Power Operations AP-913 process, Equipment Reliability Process. Also, a cost benefit analysis will be demonstrated showing how major cost savings can be achieved by shifting from a predominantly time-directed maintenance philosophy to a predominantly predictive strategy utilizing vibration analysis, lubricating oil analysis, thermography and other predictive technologies to better utilize resources, reduce spare part consumption and to minimize maintenance induced errors. As a result of the strides made while incorporating these new philosophies, we no longer advocate tearing apart perfectly good equipment. (author)

Analisis Spektral Daya dan Koherensi EEG Pada Anak Penderita Autism Spectrum Disorders (ASD

Directory of Open Access Journals (Sweden)

Nita Handayani

2017-12-01

Full Text Available Autism Spectrum Disorders (ASD adalah kondisi neurodevelopmental yang berkaitan dengan defisit dalam fungsi eksekutif, emosi, bahasa, dan komunikasi sosial. Beberapa teknik neuroimaging dan neurofisiologi digunakan untuk memahami hubungan antara fungsionalitas otak dan perilaku autis. Quantitative Electroencephalography (QEEG adalah sebuah teknik non-invasif yang dapat digunakan untuk memberikan gambaran fungsionalitas otak melalui beberapa besaran fisis yang dikaji. Pada paper ini akan dibahas tentang karakteristik sinyal listrik otak pada penderita austis berdasarkan analisis QEEG. Perekaman sinyal otak menggunakan Emotiv Epoc 14 channel (AF3, F7, F3, FC5, T7, P7, O1, O2, P8, T7, FC6, F4, F8, AF4 dan 2 channel referensi (CMS dan DRL. Jumlah subjek uji dalam penelitian sebanyak 6 anak penderita autis dan 5 anak sehat sebagai kontrol dengan rentang usia antara 10-15 tahun. Perekaman otak dilakukan pada kondisi rileks dan mata terutup selama 15 menit. Metode analisis data meliputi pre-processing data EEG untuk menghilangkan noise dan artefak, perhitungan spektral daya menggunakan periodogram Welch, dan analisis konektivitas fungsional otak dengan menghitung besarnya koherensi intra-hemisphere dan inter-hemisphere. Dari hasil studi diperoleh bahwa pada anak autis terjadi peningkatan spektral daya pada pita delta dan penurunan spektral daya pada pita alpha dibandingkan dengan subjek kontrol. Analisis konektivitas fungsional otak pada anak autis menunjukkan nilai koherensi intra-hemisphere dan inter-hemisphere yang lebih rendah pada pita delta dan theta, khususnya pada area frontal. QEEG dapat digunakan untuk karakterisasi sinyal otak pada penderita autis dan membedakannya dari subjek normal. Autism Spectrum disorder (ASD is a neurodevelopmental disorder associated with deficits in executive function, emotions, language, and social communication. Several neuroimaging and neurophysiology techniques are used to understand the relationship between

ANALISIS RASIO ALTMAN MODIFIKASI PADA PREDIKSI KEBANGKRUTAN PERUSAHAAN PROPERTY DAN REAL ESTATE YANG TERDAFTAR DI BEI

OpenAIRE

Anita Tri Widiyawati; Supri Wahyudi Utomo; Nik Amah

2015-01-01

Penelitian ini bertujuan untuk mengetahui pengaruh rasio Altman Modifikasi terhadap prediksi kebangkrutan. Jenis penelitian ini termasuk penelitian kuantitatif. Populasi dalam penelitian ini adalah perusahaan property dan real estate yang terdaftar di BEI. Teknik pengambilan sampel menggunakan purposive sampling sehingga diperoleh sampel sejumlah 32 perusahaan property dan real estate yang menerbitkan laporan keuangannya selama tahun 2011-2013. Teknik analisis data menggunakan regresi logisti...

ANALISIS KINERJA COOLING TOWER 8330 CT01 PADA WATER TREATMENT PLANT-2 PT KRAKATAU STEEL (PERSERO. TBK

Directory of Open Access Journals (Sweden)

Hutriadi Pratama Siallagan

2017-11-01

Full Text Available Pada proses produksi baja sangat erat kaitannya dengan pendinginan baik untuk proses pendinginan baja maupun pendinginan mesin-mesin produksi supaya terhindar dari over heat sehingga dapat bekerja dengan optimal. Pada PT Krakatau Steel menggunakan beberapa sistem pendingin salah satunya adalah sistem pendingin cooling tower 8330 CT 01. Sistem pendingin tersebut digunakan untuk menunjang proses produksi dan juga pendinginanan mesin produksi khusunya pada Slab Steel Plant (SSP, dengan peran yang sangat besar maka cooling tower 8330 CT 01 harus diketahui bagaimana kinerjanya. Skripsi ini membahas tentang analisis kinerja Cooling tower 8330 CT 01 dengan membandingkan data teori dengan data aktual berdasarkan perhitungan-perhitungan sehingga dapat diketahui bagaimana kinerja dari Cooling tower 8330 CT 01 tersebut. Dari hasil analisis diperoleh penurunan efisiensi sebesar 22,353%, kapasitas pendinginan 7.033,35 Kj/s, Hal tersebut diakibatkan oleh temperatur air yang masuk Cooling tower 8330 CT 01 tidak terlalu tinggi, karena SSP sedang dalam pengerjaan revitatalisi, agar lebih efektif dan efisien Cooling tower 8330 CT 01 sebaiknya lebih dimamfaatkan lagi untuk pendingin objek lainnya sehingga temperatur air yang masuk tidak terlalu rendah.

A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions

International Nuclear Information System (INIS)

Do, Phuc; Voisin, Alexandre; Levrat, Eric; Iung, Benoit

2015-01-01

This paper deals with a proactive condition-based maintenance (CBM) considering both perfect and imperfect maintenance actions for a deteriorating system. Perfect maintenance actions restore completely the system to the ‘as good as new’ state. Their related cost are however often high. The first objective of the paper is to investigate the impacts of imperfect maintenance actions. In fact, both positive and negative impacts are considered. Positive impact means that the imperfect maintenance cost is usually low. Negative impact implies that (i) the imperfect maintenance restores a system to a state between good-as-new and bad-as-old and (ii) each imperfect preventive action may accelerate the speed of the system's deterioration process. The second objective of the paper is to propose an adaptive maintenance policy which can help to select optimally maintenance actions (perfect or imperfect actions), if needed, at each inspection time. Moreover, the time interval between two successive inspection points is determined according to a remaining useful life (RUL) based-inspection policy. To illustrate the use of the proposed maintenance policy, a numerical example finally is introduced. - Highlights: • A new imperfect maintenance model for deterioration system is proposed. • Both positive and negative impacts of an imperfect maintenance action are investigated. • An adaptive condition-based maintenance policy is introduced. • The optimal number of useful imperfect maintenance actions for each life cycle is optimally provided

ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

Directory of Open Access Journals (Sweden)

Subangkit Subangkit

2015-05-01

Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

Competence within Maintenance

OpenAIRE

Nerland, Annette Smørholm

2010-01-01

Maintenance can be a contributing factor to unwanted events, as well as desired events and states. Human competence can be defined as the ability to perform a specific task, action or function successfully, and is therefore a key factor to proper execution of maintenance tasks. Hence,maintenance will have negative consequences if done wrong, and give positive results when done right. The purpose of this report is to study the many aspects of maintenance competence. Endeavoring to improve ...

Random maintenance policies

CERN Document Server

Nakagawa, Toshio

2014-01-01

Exploring random maintenance models, this book provides an introduction to the implementation of random maintenance, and it is one of the first books to be written on this subject.  It aims to help readers learn new techniques for applying random policies to actual reliability models, and it provides new theoretical analyses of various models including classical replacement, preventive maintenance and inspection policies. These policies are applied to scheduling problems, backup policies of database systems, maintenance policies of cumulative damage models, and reliability of random redundant systems. Reliability theory is a major concern for engineers and managers, and in light of Japan’s recent earthquake, the reliability of large-scale systems has increased in importance. This also highlights the need for a new notion of maintenance and reliability theory, and how this can practically be applied to systems. Providing an essential guide for engineers and managers specializing in reliability maintenance a...

Plant Maintenance. The Licensee's Viewpoint

Energy Technology Data Exchange (ETDEWEB)

Ungi, T. [Heysham 2 Power Station, Nuclear Electric LTD (United Kingdom)

1997-07-01

Plant maintenance is a very complex process which requires considerable effort from both within the maintenance process and also many support activities. It is important that the plant maintenance policy is translated into a maintenance programme which will define all relevant aspects of the maintenance. An aspect of this maintenance programme will be a maintenance catalogue which will define the maintenance activities to be carried out and at what frequencies. This paper is aimed at discussing the maintenance philosophy and resulting maintenance catalogues currently adopted in Nuclear Electric Ltd, and in particular at Heysham 2 Power Station. It goes on to consider whether these maintenance catalogues contain the optimum maintenance and if not should they be changed. If change is required, the process by which this change will be brought about is also discussed. (author)

Equipment Maintenance management support system based on statistical analysis of maintenance history data

International Nuclear Information System (INIS)

Shimizu, S.; Ando, Y.; Morioka, T.

1990-01-01

Plant maintenance is recently becoming important with the increase in the number of nuclear power stations and in plant operating time. Various kinds of requirements for plant maintenance, such as countermeasures for equipment degradation and saving maintenance costs while keeping up plant reliability and productivity, are proposed. For this purpose, plant maintenance programs should be improved based on equipment reliability estimated by field data. In order to meet these requirements, it is planned to develop an equipment maintenance management support system for nuclear power plants based on statistical analysis of equipment maintenance history data. The large difference between this proposed new method and current similar methods is to evaluate not only failure data but maintenance data, which includes normal termination data and some degree of degradation or functional disorder data for equipment and parts. So, it is possible to utilize these field data for improving maintenance schedules and to evaluate actual equipment and parts reliability under the current maintenance schedule. In the present paper, the authors show the objectives of this system, an outline of this system and its functions, and the basic technique for collecting and managing of maintenance history data on statistical analysis. It is shown, from the results of feasibility tests using simulation data of maintenance history, that this system has the ability to provide useful information for maintenance and the design enhancement

Lean Maintenance Applied to Improve Maintenance Efficiency in Thermoelectric Power Plants

OpenAIRE

Orlando Duran; Andrea Capaldo; Paulo Andrés Duran Acevedo

2017-01-01

Thermoelectric power plants consist of a set of critical equipment that require high levels of availability and reliability. Due to this, maintenance of these physical assets is gaining momentum in industry. Maintenance is considered as an activity that contributes to improving the availability, efficiency and productivity of each piece of equipment. Several techniques have been used to achieve greater efficiencies in maintenance, among which we can find the lean maintenance philosophy. Despi...

Using the system maintenance datastore to characterize lifetime maintenance for PLiM

International Nuclear Information System (INIS)

Watson, P.; Dam, R.; Nickerson, J.

2004-01-01

A comprehensive Plant Life Management (PLiM) program involves evaluating a large amount of information. For any plant, there are numerous maintenance, surveillance and inspection programs for the important systems, structures and components. There is extensive industry experience on component failure modes, degradation mechanisms and recommended maintenance practices. This information forms the basis of the aging assessment work, through which improvements to these plant programs are identified. AECL has developed several tools to manage the quantities of information required in aging assessment studies, such as the SYSTMS (SYtematic approach for the development of STrategy for Maintenance and Surveillance) tool and the System Maintenance Datastore (SMD). The SMD has been developed to serve as a hub to a Systematic based Adaptive Maintenance Program (SAMP), by storing maintenance resource requirements for recommended maintenance tasks for use by the other processes in a SAMP. The SMD can be used to (a) quantify the savings or cost of optimising a maintenance program, (b) characterize and understand long term trends in condition-based maintenance due to component aging, (c) quantify the resource savings due to optimum timing of component replacement or general plant refurbishment, and (d) provide aging assessment cost information for input to plant asset evaluation. The SMD contains data for regular maintenance program tasks, plant condition assessment recommendations, and equipment refurbishment costs. A prototype SMD has been developed with data tables populated with information from operating CANDU stations. The SMD is now available to be used either with a SYSTMS evaluation or with a plant's database of maintenance tasks. (author)

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

Science.gov (United States)

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

Penerapan Total Productive Maintenance dengan menggunakan metode OEE pada turbin uap Type C5 DS II – GVS

Directory of Open Access Journals (Sweden)

Joel Bastanta Perangin Angin

2018-01-01

Full Text Available Abstrak Secara harfiah, tidak ada barang ataupun benda buatan manusia yang tidak dapat rusak, mesin turbin uap misalnya. Namun kerusakan tersebut dapat dicegah dengan metode perawatan yang tepat demi masa pakai yang lebih lama. Penelitian ini menganalisis tentang penerapan Total Productive Maintenace (TPM pada mesin turbin uap untuk peningkatan produktivitas dengan menggunakan metode Overall Equipment Efectiveness (OEE di PT PP London Sumatera Indonesia, tbk. Didalam analisis TPM dengan menggunakan metode OEE ini ada terdapat enam penyebab kerugian yang disebut dengan Six Big Losses yaitu diantaranya : kerusakan peralatan, persiapan peralatan, gangguan kecil dan waktu nganggur, kecepatan rendah, cacat produk dalam proses, hasil rendah.Kesimpulan yang didapat adalah nilai rata – rata OEE selama tahun 2015 adalah 65,08 % masih dibawah standar. Nilai gangguan kecil dan waktu nganggur 85,44 % dengan total waktu 2449,54 jam, hasilCacat produk dalam proses2,52 % dengan total waktu 72,12 jam, hasilKecepatan rendah 11,58 % dengan total waktu 331,88 jam, hasil Kerusakan peralatan0,38 % dengan total waktu 11 jam, hasil Persiapan peralatan 0,08 % dengan total waktu 2,41 jam, hasil Hasil rendah 0. Kata kunci: Total Productive Maintenance, Overall Equipment Effectiveness, Six Big Losses,Maintenance, Turbin Uap Abstract Generally, there is nothing properties hand made without damaging, steam turbine engines as an example. But the damage can be prevent by the precise method maintenance in the machines for the long life time. This study analyzes the application of Total Productive Maintenance (TPM at the steam turbine machinery to increase productivity by using the method Overall Equipment Effectiveness (OEE. In the analysis of TPM using OEE there are six causes of loss called Six Big Losses, such as: damage to equipment ( breakdown losses , preparation of equipment ( set- up and adjustment , disorders of the small and idle time ( idling and minor stoppages

ANALISIS PENGGUNAAN FILTER AKTIF SHUNT UNTUK MENANGGULANGI THD DI RSUP SANGLAH

Directory of Open Access Journals (Sweden)

I Wayan Rinas

2009-12-01

Full Text Available Rumah Sakit Umum Pusat Sanglah (RSUP memiliki tingkat THD (Total Harmonics Distortion  arus yang tidak sesuai dengan standar IEEE 159-1992. THD arus yang berlebih dapat menyebabkan berbagai kekurangan. Untuk mengatasi masalah ini digunakan filter aktif shunt berbasis inverter. Dalam penelitian ini dilakukan simulasi penggunaan filter aktif menggunakan sofware simulink MATLAB 7.0.4 Hasil analisis menunjukan pemasangan filter aktif menyebabkan terjadi penurunan kandungan THD arus dan THD tegangan pada feeder yang bermasalah. Kandungan THD arus dan THD tegangan telah sesuai dengan IEEE 152-1992. Daya distorsi harmonisa pada sistem mengalami penurunan dan terjadi peningkatan faktor daya mendekati unity power factor pada feeder.

ANALISIS PENJUALAN LEMARI ES MEREK LG PADA PT. LG ELECTRONICS INDONESIA CABANG PEKANBARU

Directory of Open Access Journals (Sweden)

Hadiyati Hadiyati

2015-04-01

Full Text Available Abstrak: PT. LG Electronics Indonesia Cabang Pekanbaru merupakan salah satu perusahaan perdagangan yang menjual berbagai macam produk elektronik termasuk  Lemari Es. Penelitian ini bertujuan untuk: (1. Mengetahui penjualan yang dilakukan oleh manajemen PT. LG Electronics Indonesia Cabang Pekanbaru. (2. Mengetahui faktor-faktor yang menyebabkan tidak tercapainya target penjualan Lemari Es Merek LG Pada PT. LG Electronics Indonesia Cabang Pekanbaru. Populasi dalam penelitian ini adalah keseluruhan dari objek yaitu seluruh konsumen Lemari Es merek LG pada PT. LG Electronics Indonesia Cabang Pekanbaru pada tahun 2013 yaitu sebanyak 8.563 orang. Karena keterbatasan penulis, maka diambil sampel yang dianggap mewakili pelanggan yaitu sebanyak 100 orang dengan rumus slovin. Analisis data dilakukan dengan menggunakan metode Analisis Deskriptif. Variabel yang digunakan adalah produk, harga, dan promosi. Berdasarkan hasil penelitian diperoleh, tidak tercapainya target penjualan Lemari Es merek LG pada PT. LG Electronics Indonesia Cabang Pekanbaru karena produk yang ditawarkan belum sepenuhnya sesuai dengan keinginan dan harapan konsumen, harga yang ditawarkan belum sepenuhnya sesuai dengan kondisi ekonomi masyarakat secara umum, serta promosi yang belum maksimal. Abstract: PT. LG Electronics Indonesia Branch of Pekanbaru is one trading company that sells a wide range of electronic products including Refrigerator. This study aims to: (1. Knowing the sales made by the management of PT. LG Electronics Indonesia Branch of Pekanbaru. (2. Knowing the factors that leads failure to achieve sales targets Refrigerator Brand LG At PT. LG Electronics Indonesia Branch of Pekanbaru. The population in this study is the whole of the object that is the entire consumer Refrigerator LG brand in the PT. LG Electronics Indonesia Pekanbaru Branch in 2013 as many as 8563 people. Because of the limitations of the author, then a swab which is considered to represent the customer

Integrated maintenance program (IMP)

International Nuclear Information System (INIS)

Zemdegs, R.T.; Chout, Q.B.

1998-01-01

Approaches to the maintenance of nuclear power plants have undergone significant change in the past several decades. The traditional breakdown approach has been displaced by preventive (calendar-based) maintenance and more recently, by condition-based maintenance (CBM). This is largely driven by the fact that traditional maintenance programs, derived primarily from equipment vendor recommendations, are generally unsuccessful in controlling maintenance costs or equipment failures. Many advances in the maintenance field have taken place since the maintenance plans for Ontario Hydro's nuclear plants were initially established. Ontario Hydro nuclear plant operating costs can be substantially reduced and Incapability Factor improved with the application of modern maintenance processes and tools. Pickering is designated as the lead station for IMP. Of immediate concern is the fact that Pickering Nuclear Division has been experiencing a significant backlog of Operating Preventive Maintenance Callups. This backlog, over 2000, is unacceptable to both station management and the nuclear regulator, the Atomic Energy Control Board. In addition there are over 500 callups in various stages of revision (in hyperspace) without an adequate control nor reporting system to manage their completion. There is also considerable confusion about the classification of l icensing c allups, e.g. callups which are mandatory as a result of legal requirements. Furthermore the ineffectiveness of the Preventive Maintenance (PM) has been the subject of peer audits and Atomic Energy Control Board (AECB) findings over the past several years. The current preventive maintenance ratio PM2 /(PM+CM3) at Pickering ND is less than 20%, due to the current high load of equipment breakdown. This past summer, an Independent Integrated Performance Assessment (IIPA) review at Ontario Hydro confirmed these concerns. Over the past several years, Ontario Hydro nuclear staff have evaluated several programs to improve

Maintenance work management system

International Nuclear Information System (INIS)

Kanai, T.; Takahashi, Y.; Takahashi, K.; Nishino, M.; Takeshige, R.

2000-01-01

The maintenance work management system supports the efficient drawing up of various documents for the maintenance work at nuclear power stations and the speeding up of the permission procedure. In addition, it improves the quality assurance of the safety and reliability of the maintenance work. Key merits of the system are: 1. Efficiently drawing up various documents for the maintenance work by using the stored data for the previous maintenance work and the pipe and instrument diagram (P and ID) data. 2. Supporting the management work for the completion of maintenance work safety by using the isolation information stored on the computer system. 3. Speeding up the permission procedure by electronic mail and electronic permission. 4. Displaying additional information such as the specifications of equipment, maintenance result, and maintenance plan by linking up with the database of another system. 5. Reducing the cost of hardware devices by using client/server network configurations of personal computers and a personal computer server. (author)

Nonlinear analysis of thermal stresses of a of first stage nozzle of a gas turbine at full load from the results of an analysis of conjugated heat transference; Analisis no lineal de esfuerzos termicos de una tobera de primera etapa de turbina de gas a plena carga a partir de resultados de un analisis de transferencia de calor conjugado

Energy Technology Data Exchange (ETDEWEB)

Perez Hernandez, Efrain [Centro Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico); Mazur C, Zdzislaw; Garcia Illescas, R; Hernandez Rossette, Alejandro [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-11-15

The gas turbines operate at extremely high temperatures, at high thermal and mechanical stresses, causing that the useful life of the involved components be reduced. In the present article the results realized by previous investigations of temperatures obtained from analysis of heat transfer and flow of fluids of the nozzle by means of the Star-CD program based on finite volumes is presented. Later, the NISA program of finite elements was used to realize the analysis of thermal stresses considering the material plasticity. The methodology employed to determine the material properties variable with the temperature of the super-alloy FSX-414 and the plasticity model used in the structural analysis in the finite element program. The result will be later used in the fatigue analysis for the useful life assessment. [Spanish] Las turbinas de gas operan a temperatura extremadamente altas, a elevados esfuerzos termicos y mecanicos, ocasionando que la vida de los componentes involucrados se reduzca. En el presente articulo se presentan los resultados realizados por previas investigaciones de temperaturas obtenidas a partir de analisis de transferencia de calor y flujo de fluidos de la tobera mediante el programa Star-CD basado en volumenes finitos. Posteriormente, se utilizo el programa NISA de elementos finitos para realizar el analisis de esfuerzos termicos considerando plasticidad del material. Se muestra la metodologia empleada para determinar las propiedades del material variables con la temperatura de la superaleacion FSX-414 y el modelo de plasticidad utilizado en el analisis estructural en el programa de elemento finito. Los resultados seran empleados posteriormente en el analisis de fatiga para la estimacion de vida util.

Maintenance Production Demand and Capacity Analysis of Third Maintenance Battalion

Science.gov (United States)

2017-12-01

Delivery T/E Table of Equipment TFSMS Total Force Structure Management System TFSP Total Force Structure Process TM Technical Manual T/O Table of...exercises each year, both on Okinawa and throughout the Pacific theater. When equipment requires maintenance beyond the organizational -level...demand was analyzed based on customer cycle time (i.e., time that equipment was in Third Maintenance Battalion custody), maintenance cycle time during

A Situational Maintenance Model

DEFF Research Database (Denmark)

Luxhoj, James T.; Thorsteinsson, Uffe; Riis, Jens Ove

1997-01-01

An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance.......An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance....

Grounds Maintenance Equipment and Procedures. Building Maintenance. Module VI. Instructor's Guide.

Science.gov (United States)

Crank, Virgil

This curriculum guide, one of six modules keyed to the building maintenance competency profile developed by industry and education professionals, provides materials for two units on grounds maintenance equipment and procedures. The first unit deals with grounds maintenance equipment and includes the following lessons: safety; changing oil/filter…

Need for a probabilistic fire analysis at nuclear power plants; Necesidad de un analisis probabilista de incendios en una central nuclear

Energy Technology Data Exchange (ETDEWEB)

Calabuig Beneyto, J L [Empresarios Agrupados, A.I.E., Madrid (Spain); Ibanez Aparicio, J [Asociacion Nuclear ASCO, Barcelona (Spain)

1993-12-15

Although fire protection standards for nuclear power plants cover a wide scope and are constantly being updated, the existence of certain constraints makes it difficult to precisely evaluate plant response to different postulatable fires. These constraints involve limitations such as: - Physical obstacles which impede the implementation of standards in certain cases; - Absence of general standards which cover all the situations which could arise in practice; - Possible temporary noncompliance of safety measures owing to unforeseen circumstances; - The fact that a fire protection standard cannot possibly take into account additional damages occurring simultaneously with the fire; Based on the experience of the ASCO NPP PSA developed within the framework of the joint venture, INITEC-INYPSA-EMPRESARIOS AGRUPADOS, this paper seeks to justify the need for a probabilistic analysis to overcome the limitations detected in general application of prevailing standards. (author)

Site Maintenance Plan: Part 2, Site Maintenance Action Plan for FY 1994

Energy Technology Data Exchange (ETDEWEB)

Fisk, E.L.

1994-06-01

This Fiscal Year (FY) 1994 Site Maintenance Action Plan (SMAP) is Part II of the Site Maintenance Plan, and has been written by Westinghouse Hanford Company (WHC) to outline the requirements stated in DOE Order 4330.4B, Maintenance Management Program, Chapter 1, Paragraph 3.3.1. The SMAP provides an annual status of maintenance initiatives completed and planned, a summary of performance indicators, a summary of maintenance backlog, a listing of real property and capital equipment maintenance cost estimates that were used to create the FY 1996 infrastructure and maintenance budget input, and a listing of proposed line item and general plant projects. Additionally, assumptions for various Site programs are listed to bring the Site Maintenance Plan into focus with overall Site activities. The primary mission at Hanford is to clean up the Site. In this cleanup process WHC will provide scientific and technological expertise to meet global needs, and partnership with stakeholders in the region to develop regional economic diversification. Other missions at the Hanford Site include energy research and development, and waste management and disposal activities. Their primary mission has a 30-year projected life span and will direct the shutting down and cleanup of defense production facilities and the Fast Flux Test Facility. This long-term mission requires continuous maintenance and in many instances, replacement of existing basic infrastructure, support facilities, and utilities. Without adequate maintenance and capital funding these infrastructure, support facilities, and utilities will continue to deteriorate causing an increase in backlogged work.

Site Maintenance Plan: Part 2, Site Maintenance Action Plan for FY 1994

International Nuclear Information System (INIS)

Fisk, E.L.

1994-06-01

This Fiscal Year (FY) 1994 Site Maintenance Action Plan (SMAP) is Part II of the Site Maintenance Plan, and has been written by Westinghouse Hanford Company (WHC) to outline the requirements stated in DOE Order 4330.4B, Maintenance Management Program, Chapter 1, Paragraph 3.3.1. The SMAP provides an annual status of maintenance initiatives completed and planned, a summary of performance indicators, a summary of maintenance backlog, a listing of real property and capital equipment maintenance cost estimates that were used to create the FY 1996 infrastructure and maintenance budget input, and a listing of proposed line item and general plant projects. Additionally, assumptions for various Site programs are listed to bring the Site Maintenance Plan into focus with overall Site activities. The primary mission at Hanford is to clean up the Site. In this cleanup process WHC will provide scientific and technological expertise to meet global needs, and partnership with stakeholders in the region to develop regional economic diversification. Other missions at the Hanford Site include energy research and development, and waste management and disposal activities. Their primary mission has a 30-year projected life span and will direct the shutting down and cleanup of defense production facilities and the Fast Flux Test Facility. This long-term mission requires continuous maintenance and in many instances, replacement of existing basic infrastructure, support facilities, and utilities. Without adequate maintenance and capital funding these infrastructure, support facilities, and utilities will continue to deteriorate causing an increase in backlogged work

Maintenance-Ready Web Application Development

Directory of Open Access Journals (Sweden)

Ion IVAN

2016-01-01

Full Text Available The current paper tackles the subject of developing maintenance-ready web applications. Maintenance is presented as a core stage in a web application’s lifecycle. The concept of maintenance-ready is defined in the context of web application development. Web application maintenance tasks types are enunciated and suitable task types are identified for further analysis. The research hypothesis is formulated based on a direct link between tackling maintenance in the development stage and reducing overall maintenance costs. A live maintenance-ready web application is presented and maintenance related aspects are highlighted. The web application’s features, that render it maintenance-ready, are emphasize. The cost of designing and building the web-application to be maintenance-ready are disclosed. The savings in maintenance development effort facilitated by maintenance ready features are also disclosed. Maintenance data is collected from 40 projects implemented by a web development company. Homogeneity and diversity of collected data is evaluated. A data sample is presented and the size and comprehensive nature of the entire dataset is depicted. Research hypothesis are validated and conclusions are formulated on the topic of developing maintenance-ready web applications. The limits of the research process which represented the basis for the current paper are enunciated. Future research topics are submitted for debate.

Penggunaan Kontrasepsi pada Remaja Perempuan Kawin di Indonesia (Analisis Riskesdas 2013

Directory of Open Access Journals (Sweden)

Anissa Rizkianti

2017-12-01

Full Text Available AbstractAdolescent pregnancy has been highlighted in various parts of the world including access to contraceptive use among married teenagers. This is an advanced analysis of secondary data of Riskesdas 2013 that aims to identify contraceptive use among married adolescents in Indonesia. The data used in multilevel logistic regression analysis consist of demographic characteristics of adolescents, parity, availability of health services and the use of health insurance.. The results showed that 54.2% of married adolescents women or their partners used any method of contraception. Age, education level, socioeconomic status and the use of health insurance have significant relationships to contraceptive use after adjusted by the type of residence, parity and availability of health services. Adolescent aged above 17 years (OR=1.49, 95% CI 1.25 to 1.79 and had higher socio-economic status (OR kuintil 5=1.62, 95% CI 1,19- 2.22 were more likely to use contraception, while young women with higher school education (OR= 0.73; 95% CI .58-.91 as well as used health insurance (OR=0.72; 95 % CI 0.60 to 0.86 had smaller probability in contraceptive use. Fulfillment of adolescent access to contraception is expected to focus not only on increasing of knowledge but also purchasing power, which is through the utilisation of health insurance.Key words: contraception, married adolescents, RiskesdasAbstrakKehamilan remaja telah menjadi sorotan di berbagai belahan dunia, termasuk akses terhadap penggunaan kontrasepsi pada remaja kawin. Studi ini merupakan analisis lanjut Riskesdas 2013 untuk mengetahui penggunaan kontrasepsi pada remaja kawin di Indonesia. Data yang digunakan dalam analisis regresi logistik multi level terdiri atas karakteristik demografi remaja, paritas, ketersediaan pelayanan kesehatan serta penggunaan jaminan kesehatan. Subjek adalah seluruh remaja perempuan berusia 15-19 tahun yang berstatus kawin dan aktif secara seksual. Hasil menunjukkan bahwa

KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula) POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

OpenAIRE

Ruby Vidia Kusumah; Sawung Cindelaras; Anjang Bangun Prasetio

2015-01-01

Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula) populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap varias...

Building relationships for better maintenance.

Science.gov (United States)

Lee, Hackman Hon Yin; Scott, David

2009-02-01

Effective management of building maintenance is a vital ingredient in ensuring a high quality built environment for any building's occupiers. However, maintenance is not high on the list of priorities for most organisations. Communication between top management personnel looking at maintenance issues from a strategic standpoint and maintenance staff considering them at an operational level is often not as good as it should be. When planning maintenance activities maintenance personnel often draw too heavily on their technical experience and expertise without taking sufficient account of wider organisational objectives or consulting effectively with top management. Senior managers also regularly complain about lack of managerial input from maintenance departments. Such barriers contribute to communication difficulties between top management at a strategic level and maintenance personnel at an operational level. Identifying where the key differences lie in senior managers' and maintenance personnel's viewpoints on maintenance strategy can prove invaluable in achieving some convergence of opinions and optimising the efficiency of the overall building maintenance process.

ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI LOYALITAS PELANGGAN DAN DAMPAKNYA TERHADAP KEUNGGULAN BERSAING (STUDI PADA BMT AMANAH UMMAH SUKOHARJO

Directory of Open Access Journals (Sweden)

meyta pritandhari

2015-05-01

Full Text Available Abstrak   Baitul Maal Wat Tamwil merupakan salah satu model lembaga keuangan syariah yang saat ini banyak muncul di Indonesia. BMT Amanah Ummah memiliki 9.142 anggota dan 45 % anggotanya tidak loyal kepada BMT. Penelitian ini bertujuan untuk mengetahui faktor-faktor yang mempengaruhi loyalitas pelanggan dan dampaknya terhadap keunggulan bersaing. Penelitian ini menggunakan metode penelitian deskriptif dengan pendekatan analisis kualitatif dengan model analisis interaktif. Teknik sampling yang digunakan adalan insidental sampling untuk anggota BMT dan purposive sampling  untuk  pimpinan, manajer dan  marketing.  Teknik  pengumpulan  data yang digunakan yaitu wawancara, observasi dan dokumentasi. Hasil penelitian ini menunjukkan bahwa dari beberapa faktor yang mempengaruhi loyalitas pelanggan yaitu reputasi merek, kepuasan angggota, kualitas pelayanan, kualitas pelayanan berpengaruh positif terhadap kepuasan anggota, dan kualitas pelayanan. Dari beberapa faktor tersebut faktor kualitas pelayanan yang paling dominan dalam mempengaruhi loyalitas anggota.Dampak loyalitas terhadap keunggulan bersaing dapat dilihat dari seberapa banyak anggota BMT yang tidak pindah ke lembaga keuangan lain. Semakin bagus kualitas pelayanan maka semakin tinggi tingkat loyalitas dan keunggulan bersaing antar lembaga keuangan juga semakin tinggi.

Maintenance improvement program

International Nuclear Information System (INIS)

Derbonne, D.R.; Plunkett, T.F.; Simpson, J.R.

1989-01-01

During fuel cycle 1 at River Bend station, considerable effort was expended to reduce corrective maintenance work orders (MWOs) to <1,000. This was done by complementing the plant staff with costly contract personnel. Coming out of the first refueling outage, most contract personnel were released. The change in MWO backlog started a steady rise. It became readily apparent that to avoid costly contract staff time, a maintenance improvement program (MIP) was necessary. The MIP Was primarily directed at two areas: crew efficiency improvements and improved preplanned MWO packages. The overall effect of the MIP was to achieve significant productivity improvements with reduced operation and maintenance cost by providing frequent accountability to all levels of maintenance supervision. The MIP also produced a feeling of pride among the maintenance department employees that had not really existed before. This was the best benefit of all

Modern electronic maintenance principles

CERN Document Server

Garland, DJ

2013-01-01

Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

Predicting maintenance of attendance at walking groups: testing constructs from three leading maintenance theories.

Science.gov (United States)

Kassavou, Aikaterini; Turner, Andrew; Hamborg, Thomas; French, David P

2014-07-01

Little is known about the processes and factors that account for maintenance, with several theories existing that have not been subject to many empirical tests. The aim of this study was to test how well theoretical constructs derived from the Health Action Process Approach, Rothman's theory of maintenance, and Verplanken's approach to habitual behavior predicted maintenance of attendance at walking groups. 114 participants, who had already attended walking groups in the community for at least 3 months, completed a questionnaire assessing theoretical constructs regarding maintenance. An objective assessment of attendance over the subsequent 3 months was gained. Multilevel modeling was used to predict maintenance, controlling for clustering within walking groups. Recovery self-efficacy predicted maintenance, even after accounting for clustering. Satisfaction with social outcomes, satisfaction with health outcomes, and overall satisfaction predicted maintenance, but only satisfaction with health outcomes significantly predicted maintenance after accounting for clustering. Self-reported habitual behavior did not predict maintenance despite mean previous attendance being 20.7 months. Recovery self-efficacy, and satisfaction with health outcomes of walking group attendance appeared to be important for objectively measured maintenance, whereas self-reported habit appeared not to be important for maintenance at walking groups. The findings suggest that there is a need for intervention studies to boost recovery self-efficacy and satisfaction with outcomes of walking group attendance, to assess impact on maintenance.

Condition based maintenance in the context of opportunistic maintenance

NARCIS (Netherlands)

Koochaki, Javid; Bokhorst, Jos A. C.; Wortmann, Hans; Klingenberg, Warse

2012-01-01

Condition based maintenance (CBM) uses the operating condition of a component to predict a failure event. Compared to age based replacement (ABR), CBM usually results in higher availability and lower maintenance costs, since it tries to prevent unplanned downtime and avoid unnecessary preventive

EPR design for maintenance

International Nuclear Information System (INIS)

Krugmann, U.

1998-01-01

Preventive maintenance is very important in achieving high plant availability. For the European Pressurized Reactor (EPR) preventive maintenance has been carefully addressed in the design stage. This is particularly necessary because of the traditionally different maintenance strategies employed in France and Germany. This paper emphasizes the following features introduced in the ERP design to minimize the duration of the refueling outage: (1) containment accessibility during power operation; (2) overall plant layout to facilitate inspections and maintenances within the containment; and (3) safety system design for enabling preventive maintenance during power operation. (author)

ANALISIS PENERAPAN PRINSIP MENGENAL NASABAH PADA BANK ACEH SYARIAH BANDA ACEH

Directory of Open Access Journals (Sweden)

Husnawati Husnawati

2013-06-01

Full Text Available This study aims to identify the systems and procedures that is applied at Bank Aceh Syariah (BAS Banda Aceh in knowing of its customers. In specific, it aims to analyze the effectiveness of the implementation of Knowing Your Customer (KYC Principle at BAS. This study employs both primary and secondary data which was obtained through field and library research. The data was analyzed using descriptive analysis method. The results show that in knowing its customers, BAS Banda Aceh taken several steps of customer identification includes the identity check, occupation, source of funds, and the purpose of the use of funds. The implementation of the KYC principle in BAS Banda Aceh has effectively overcome and prevented the banking crimes such as money laundering. The implementation of the principle is intended to embolden the implementation of prudential principles in order to reduce business risks such as operational risk, legal risk, concentration risk, and reputational risk. =========================================== Penelitian ini bertujuan untuk mengidentifikasi sistem dan prosedur yang diterapkan Bank Aceh Syariah (BAS Banda Aceh dalam mengenal nasabah. Secara khusus, penelitian bertujuan untuk menganalisis efektifitas penerapan Prinsip Mengenal Nasabah pada BAS. Data untuk penelitian ini bersumber dari data primer melalui kajian lapangan, dan data sekunder melalui kajian kepustakaan. Analisis data menggunakan metode deskriptif analisis. Dari hasil penelitian dapat diketahui bahwa sistem dan prosedur yang diterapkan BAS Banda Aceh dalam mengenal nasabah yaitu identifikasi calon nasabah yang meliputi identitas, pekerjaan, sumber dana dan tujuan penggunaan dana yang dilengkapi dokumen pendukung. Penerapan Prinsip Mengenal Nasabah (Know Your Customer Principle pada BAS Banda Aceh efektif dalam mengatasi kejahatan-kejahatan dalam dunia perbankan seperti pencucian uang. Penerapan prinsip tersebut dimaksudkan agar mendorong terselenggaranya prinsip

Advances in safety related maintenance

International Nuclear Information System (INIS)

2000-03-01

The maintenance of systems, structures and components in nuclear power plants (NPPs) plays an important role in assuring their safe and reliable operation. Worldwide, NPP maintenance managers are seeking to reduce overall maintenance costs while maintaining or improving the levels of safety and reliability. Thus, the issue of NPP maintenance is one of the most challenging aspects of nuclear power generation. There is a direct relation between safety and maintenance. While maintenance alone (apart from modifications) will not make a plant safer than its original design, deficient maintenance may result in either an increased number of transients and challenges to safety systems or reduced reliability and availability of safety systems. The confidence that NPP structures, systems and components will function as designed is ultimately based on programmes which monitor both their reliability and availability to perform their intended safety function. Because of this, approaches to monitor the effectiveness of maintenance are also necessary. An effective maintenance programme ensures that there is a balance between the improvement in component reliability to be achieved and the loss of component function due to maintenance downtime. This implies that the safety level of an NPP should not be adversely affected by maintenance performed during operation. The nuclear industry widely acknowledges the importance of maintenance in NPP safety and operation and therefore devotes great efforts to develop techniques, methods and tools to aid in maintenance planning, follow-up and optimization, and in assuring the effectiveness of maintenance

PESAN MORAL DALAM FILM TO KILL A MOCKINGBIRD (ANALISIS SEMIOTIKA PADA FILM TO KILL A MOCKINGBIRD

OpenAIRE

RENYOET, JAQUILINE MELISSA

2014-01-01

2014 JAQUILINE MELISSA RENYOET. Pesan Moral Dalam Film To Kill A Mockingbird (Analisis Semiotika Pada Film To Kill A Mockingbird). (Dibimbing oleh Muh. Nadjib dan Alem Febri Sonni). Tujuan Penelitian ini adalah mengidentifikasi bentuk pesan moral dan memahami makna pesan moral dalam film To Kill A Mockingbird. Penelitian ini dilakukan selama kurang lebih 2 bulan yaitu Maret ??? Mei 2014. Metode yang digunakan untuk penelitian ini adalah metode penelitian kualitatif den...

Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

OpenAIRE

Gunawan, Andy

2013-01-01

Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

Predictive maintenance primer

International Nuclear Information System (INIS)

Flude, J.W.; Nicholas, J.R.

1991-04-01

This Predictive Maintenance Primer provides utility plant personnel with a single-source reference to predictive maintenance analysis methods and technologies used successfully by utilities and other industries. It is intended to be a ready reference to personnel considering starting, expanding or improving a predictive maintenance program. This Primer includes a discussion of various analysis methods and how they overlap and interrelate. Additionally, eighteen predictive maintenance technologies are discussed in sufficient detail for the user to evaluate the potential of each technology for specific applications. This document is designed to allow inclusion of additional technologies in the future. To gather the information necessary to create this initial Primer the Nuclear Maintenance Applications Center (NMAC) collected experience data from eighteen utilities plus other industry and government sources. NMAC also contacted equipment manufacturers for information pertaining to equipment utilization, maintenance, and technical specifications. The Primer includes a discussion of six methods used by analysts to study predictive maintenance data. These are: trend analysis; pattern recognition; correlation; test against limits or ranges; relative comparison data; and statistical process analysis. Following the analysis methods discussions are detailed descriptions for eighteen technologies analysts have found useful for predictive maintenance programs at power plants and other industrial facilities. Each technology subchapter has a description of the operating principles involved in the technology, a listing of plant equipment where the technology can be applied, and a general description of the monitoring equipment. Additionally, these descriptions include a discussion of results obtained from actual equipment users and preferred analysis techniques to be used on data obtained from the technology. 5 refs., 30 figs

Keefektifan Konseling Behavioral Teknik Modeling dan Konseling Analisis Transaksional Teknik Role Playing untuk Meminimalkan Kecenderungan Perilaku Agresif Siswa Sekolah Menengah Atas

Directory of Open Access Journals (Sweden)

I Ketut Gading

2017-11-01

Full Text Available Abstract: This study aims to determine the effectiveness of behavioral counseling using modeling technique and counseling transactional analysis using role playing technique to minimize student’s tendency of aggressive behavior. This experimental research with pretest-posttest control group design is taking samples using purposive sampling technique. The sample were 18 tenth grade students from Senior High School Laboratorium Universitas Pendidikan Ganesha who have high aggressive behavior. 18 sample were randomly assigned to three group, that is: (1 experimental group of behavioral counseling using modeling technique; (2 counseling transactional analysis using role playing technique group; and (3 control group. Data on aggressive behavior tendency before and after treatment were collected using questionnaire of aggressive behavior, then analyzed by t test. The results show: (1 behavioral counseling using modeling technique were effective to minimize the tendency of aggressive behavior; (2 counseling transactional analysis using role playing technique were effective to minimize the aggressive behavior; and (3 counseling transactional analysis using role playing technique were more effectively minimizes the tendency of aggressive behavior rather than behavioral counseling using modeling technique. Abstrak: Penelitian ini bertujuan untuk mengetahui keefektifan konseling behavioral teknik modeling dan konseling analisis transaksional teknik role playing untuk meminimalkan kecenderungan perilaku agresif siswa. Penelitian eksperimen dengan rancangan pretest-posttest control group design ini mengambil sampel dengan teknik purposive sampling. Sampel terdiri dari 18 orang siswa kelas X Sekolah Menengah Atas (SMA Laboratorium Universitas Pendidikan Ganesha yang memiliki perilaku agresif tinggi. 18 sampel dibagi secara acak dan merata pada tiga kelompok, yaitu: (1 kelompok eksperimen yang mendapatkan perlakuan konseling behavioral teknik modeling; (2

Preventative Maintenance.

Science.gov (United States)

Migliorino, James

Boards of education must be convinced that spending money up front for preventive maintenance will, in the long run, save districts' tax dollars. A good program of preventive maintenance can minimize disruption of service; reduce repair costs, energy consumption, and overtime; improve labor productivity and system equipment reliability; handle…

Second Line of Defense: Electronic Maintenance Reports, Local Maintenance Provider User Guide, Rev. 3

Energy Technology Data Exchange (ETDEWEB)

Leigh, Richard J.

2012-09-01

The Electronic Maintenance Report forms allow Local Maintenance Providers (LMP) and other program staff to enter maintenance information into a simple and secure system. This document describes the features and information required to complete the Maintenance Report forms. It is expected that all Corrective Maintenance Reports from LMPs will be submitted electronically into the SLD Portal. As an exception (e.g., when access to the SLD Portal is unavailable), Maintenance Reports can be submitted via a secure Adobe PDF form available through the Sustainability Manager assigned to each country.

Analisis Migrasi Radio Trunking Analog ke Radio Trunking Digital di Indonesia

Directory of Open Access Journals (Sweden)

Riza Azmi

2013-09-01

Full Text Available Dalam Tabel Alokasi Spektrum Frekuensi di Indonesia pada catatan kaki INS9 dan INS13 disebutkan bahwa alokasi pada pita-pita frekuensi yang digunakan untuk teknologi trunking direncanakan dimigrasi ke sistem komunikasi trunking digital pada waktu yang akan ditentukan oleh pemerintah. Terkait dengan hal itu, studi ini bertujuan untuk mengkaji bagaimana kelayakan migrasi dari sistem trunking analog ke sistem trunking digital dan hal-hal yang terkait dengannya. Dengan menggunakan analisis biaya dan manfaat (Cost-Benefit Analysis studi ini melihat bahwa migrasi hanya dapat dilakukan jika umur masing-masing lisensi dari operator telah berakhir, atau dengan kata lain pemerintah dapat mendorong transisi ke digital dengan menerbitkan lisensi baru yaitu lisensi trunking digital.

RASISME DALAM FILM 99 CAHAYA DI LANGIT EROPA PART 1 (ANALISIS SEMIOTIKA DALAM FILM 99 CAHAYA DI LANGIT EROPA PART 1

Directory of Open Access Journals (Sweden)

Vallen Nur Rita

2016-09-01

Full Text Available Stereotip merupakan pernyataan negatif dari prasangka. Prasangka inilah yang kemudian dijadikan alasan untuk melakukan diskriminasi terhadap kelompok rasial tertentu. Stereotip dan prasangka kemudian merujuk pada suatu paham yang mempercayai adanya superioritas yang menolak adanya kesetaraan manusia yaitu rasisme. Perilaku maupun tindakan rasisme tersebut banyak muncul dalam beberapa scene film 99 Cahaya Di Langit Eropa Part 1. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana simbol-simbol digunakan untuk menggambarkan rasisme di dalam film 99 Cahaya Di Langit Eropa Part 1. Metode yang digunakan oleh peneliti adalah semiotika Roland Barthes. Model Roland Barthes terdiri dari tiga tahap analisis yaitu denotasi, konotasi, mitos. Peneliti melakukan analisis menggunakan tanda verbal dan nonverbal yang terdapat dalam film “99 Cahaya di Langit Eropa Part 1”. Dalam menganalisis film 99 Cahaya di Langit Eropa Part 1, dikelompokkan menjadi beberapa kategori yang berhubungan dengan perilaku rasisme, antara lain : stereotip, prasangka, diskriminasi

Development of an analytic outline for the aflatoxins analysis in grains and flours; Desarrollo de un esquema analitico para el analisis de aflatoxinas en granos y harinas

Energy Technology Data Exchange (ETDEWEB)

Sibaja Adams, Roxana

2000-07-01

The instrumental and analytic conditions were optimized for the aflatoxine determination B1, B2, 1 and G2 in corn and peanut byl iquid chromatography of high discharge following the analyzing method AOAC 994,08. Besides, it was defined a function for evaluating the dependence of the chromatographic discharge with the aflatoxine concentration. The analyzing method was validated, and four calibration curves were obtained for the aflatoxine B1, B2, G1 and G2, which turned to have a heterocedastico behavior. The applicability of this method was demonstrated, obtaining imagines of appropriate merit and comparable with those reported by the AOAC. Additionally, the applicability of the chromatographic method was demonstrated in fine layer for the presumptive analysis of aflatoxine, allowing both methods to propose an outline of reliable analysis of real samples. [Spanish] Se optimizaron las condiciones instrumentales y analiticas para la determinacion de aflatoxinas B1, B2, G1 y G2 en maiz y mani por Cromatografia liquida de alto desempeno siguiendo el metodo de analisis AOAC 994,08. Ademas, se definio una funcion para evaluar la dependencia del desempeno cromatografico con la concentracion de aflatoxinas.Se valido el metodo de analisis y se obtuvieron las cuatro curvas de calibracion para las aflatoxinas B1, B2, G1 y G2, las que resultaron tener un comportamiento heterocedastico. Se demostro la aplicabilidad del metodo, obteniendose figuras de merito adecuadas y comparables con las reportadas por el AOAC.Adicionalmente, se demostro la aplicabilidad del metodo de cromatografia en capa fina para el analisis presuntivo de aflatoxinas, permitiendo ambos metodos proponer un esquema de analisis confiable de muestras reales.

Framework for Maintenance Planning

DEFF Research Database (Denmark)

Soares, C. Guedes; Duarte, J. Caldeira; Garbatov, Y.

2010-01-01

the design and during the whole life span of operational use, within an integrated framework founded on risk and reliability based techniques. The document addresses designers, decision makers and professionals responsible for or involved in establishing maintenance plans. The purpose of this document......The present document presents a framework for maintenance planning. Maintenance plays a fundamental role in counteracting degradation effects, which are present in all infrastructure and industrial products. Therefore, maintenance planning is a very critical aspect to consider both during...... is to present maintenance as an integrated approach that needs to be planned, designed, engineered, and controlled by proper qualitative and quantitative techniques. This document outlines the basic premises for maintenance planning and provides the general philosophies that can be followed and points to a best...

Overview of maintenance principles and regulatory supervision of maintenance activities at nuclear power plants in Slovakia

International Nuclear Information System (INIS)

Rohar, S.; Cepcek, S.

1997-01-01

The maintenance represents one of the most important tools to ensure safe and reliable operation of nuclear power plants. The emphasis of Nuclear Regulatory Authority of the Slovak Republic to the maintenance issue is expressed by requirements in the regulations. The current practice of maintenance management in operated nuclear power plants in Slovak Republic is presented. Main aspects of maintenance, as maintenance programme, organization of maintenance, responsibilities for maintenance are described. Activities of nuclear regulatory authority in maintenance process are presented too. (author)

Analisis Plagiat dalam Penulisan Laporan Ilmiah Kelas XI Smk Sakti Gemolong Kabupaten Sragen Tahun Ajaran 2015/2016

OpenAIRE

Sari, Dwi Ratna; Arfa, Mecca

2016-01-01

Penelitian ini berjudul “Analisis Plagiat dalam Penulisan Laporan Ilmiah Kelas XI SMK Sakti Gemolong Kabupaten Sragen Tahun Ajaran 2015/2016”. Tujuan dari penelitian ini adalah untuk mengetahui pemahaman siswa mengenai tindakan plagiat, serta menganalisis tipe-tipe plagiat dan faktor-faktor yang menyebabkan tindakan plagiat. Penelitian ini menggunakan desain penelitian kualitatif dengan jenis penelitian studi kasus. Teknik pengambilan sampel pada penelitian ini menggunakan purposive sampling....

ANALISIS PENERAPAN STRATEGI PEMASARAN DALAM PENINGKATAN PANGSA PASAR PADA PT. HADJI KALLA (TOYOTA) CABANG COKROAMINOTO DI MAKASSAR

OpenAIRE

ASTRINI, PRATANTI AYU

2007-01-01

Analisis Penerapan Strategi Pemasaran Dalam Peningkatan Pangsa Pasar Pada PT. Hadji Kalla (Toyota) Cabang Cokroaminoto di Makassar Implementation of marketing strategy analyze on increasing market share study case PT.Hadji Kalla (Toyota) Cabang Cokroaminoto in Makassar Pratanti Ayu Astrini Mursalim Nohong Wardhani Hakim Tujuan dari penelitian ini adalah untuk mengetahui penerapan strategi pemasaran mobil Toyota pada PT. Hadji Kalla (Toyota) Cabang Cokroaminoto di Makassar me...

Maintenance of nuclear power plants

International Nuclear Information System (INIS)

1982-01-01

This Guide covers the organizational and procedural aspects of maintenance but does not give detailed technical advice on the maintenance of particular plant items. It gives guidance on preventive and remedial measures necessary to ensure that all structures, systems and components important to safety are capable of performing as intended. The Guide covers the organizational and administrative requirements for establishing and implementing preventive maintenance schedules, repairing defective plant items, providing maintenance facilities and equipment, procuring stores and spare parts, selecting and training maintenance personnel, reviewing and controlling plant modifications arising from maintenance, and for generating, collecting and retaining maintenance records. Maintenance shall be subject to quality assurance in all aspects important to safety. Because quality assurance has been dealt with in detail in other Safety Guides, it is only included here in specific instances where emphasis is required. Maintenance is considered to include functional and performance testing of plant, surveillance and in-service inspection, where these are necessary either to support other maintenance activities or to ensure continuing capability of structures, systems and components important to safety to perform their intended functions

Paranal maintenance and CMMS experience

Science.gov (United States)

Montano, Nelson

2004-10-01

During the last four years of operations, low technical downtime has been one of the relevant records of the Paranal Observatory. From the beginning of the Very Large Telescope (VLT) project, European Southern Observatory (ESO) has considered the implementation of a proper maintenance strategy a fundamental point in order to ensure low technical down time and preserve the Observatory's assets. The implementation of the maintenance strategy was based on the following aspects: - Strong maintenance sense during the design stage. Line Replacement Unit (LRU) concept, standardization and modularity of the Observatory equipment - Creation of a dedicated team for Maintenance - The implementation of a Computerized Maintenance Management System After four operational years, the result of these aspects has exceeded the expectations; the Observatory has been operating with high availability under a sustainable strategy. The strengths of the maintenance strategy have been based on modern maintenance concepts applied by regular production companies, where any minute of down time involves high cost. The operation of the actual Paranal Maintenance System is based mainly on proactive activities, such as regular inspections, preventive maintenance (PM) and predictive maintenance (PdM) plans. Nevertheless, it has been necessary to implement a strong plan for corrective maintenance (CM). The Spare Parts Strategy has also been an important point linked to the Maintenance Strategy and CMMS implementation. At present, almost 4,000 items related to the Observatory spare parts are loaded into the CMMS database. Currently, we are studying the implementation of a Reliability Centered Maintenance (RCM) project in one of our critical systems The following document presents the actual status of the Paranal Maintenance Strategy and which have been the motivations to implement the established strategy.

ANALISIS POSISI RECLOSER TERHADAP KEANDALAN KINERJA PENYULANG SEMPIDI BERBASISKAN SOFTWARE ETAP POWERSTATION

Directory of Open Access Journals (Sweden)

I Nengah Sunaya

2017-11-01

Full Text Available Penelitian ini menganalisis koordinasi recloser yang terdapat pada penyulang Sempidi untuk meningkatkan keandalan kinerja dari penyulang tersebut. Keandalan yang diharapkan adalah keandalan dalam penyediaan dan penyaluran dayanya. Untuk mengetahui keandalan dalam penyaluran tenaga listrik kepada konsumen perlu diperhitungkan indeks keandalannya. Indeks keandalan menjadi indikator dinyatakan dalam suatu besaran probabilitas yang bertujuan meminimalkan nilai SAIDI dan SAIFI, yaitu 1,8805505 jam/pelanggan tahun dan 5,8200455 kegagalan/pelanggan tahun, serta nilai fitness sebesar 0,091366843 untuk recloser pada posisi 10. Teknik yang digunakan dalam evaluasi keandalan sistem distribusi yaitu metode analisis dengan formula SAIDI dan SAIFI serta metode simulasi dengan memanfaatkan software ETAP powerstation

ANALISIS BAHASA GAUL ANTAR TOKOH DALAM FILM REMAJA INDONESIA “RADIO GALAU FM”

Directory of Open Access Journals (Sweden)

St. Victor Maruli tua Lumbantobing , S.Pd., M.Pd

2016-03-01

Full Text Available ABSTRAKGajala bahasa ialah segala peristiwa yang berkaitan dengan bentuk-bentukkata beserta proses pembentuknya. Gejala-gejala bahasa seringkali digunakanoleh penutur bahasa baik di dalam film dan masyarakat. Bahasa gaul salah satu gaya bahasa yang sering digunakan anak remaja jaman sekarang. Film Remaja Indonesia yang berjudul “Radio Galau FM” merupakan sebuah karya yangditulis oleh Haqi Achmad. Dalam film ini banyak proses pembentukan kata bahasagaul. Mengingat pentingnya bahasa gaul sebagai wujud produk remaja, makapeneliti tertarik untuk meneliti pembentukan bahasa gaul ini. Sesuai denganrumusan masalah maka penelitian ini dimaksudkan untuk mendeskripsikanproses pembentukan bahasa gaul, yang meliputi: 1 proses afiksasi; 2; gejalagejalabahasa dan 3, serta penggunaan jenis-jenis makna dalam bahasagaul. Untuk membahas masalah tersebut, maka dalam menganalisis, penelitimenggunakan teori pembentukan kata ( kajian Morfologi . Penelitian inimenggunakan jenis penelitian kualitatif. Sedangkan metode yang digunakanadalah metode dan ekstralingual dan teknik analisis data dalam penelitian iniberupa urai unsure langsung dan teknik ubah ujud. Data penelitian ini adalahdialog dalam film “Radio Galau FM” ( berbentuk proses afiksasi, gejala-gejalabahasa, dan jenis-jenis makna. Sumber data berupa rekaman dialog film yangterjadi dalam film “Radio Galau FM”. Secara garis besar hasil analisis datadalam penelitian bahasa gaul sangat berbeda dengan penggunaannya dalam bahasa baku bahasa Indonesia. Hasil yang diperoleh dalam penelitian ini menunjukkan bahwa, bahasa gaul merupakan produk dari remaja, maksudnyaadalah remaja dalam berkomunikasi sehari-hari menggunakan bahasa ini disetiap situasi tanpa memperhatikan keadaan dan situasi, jika dibiarkan makasikap kesopanan akan terabaikan.Kata-Kata Kunci: Pembentukan Kata, Bahasa Gaul, Film Remaja Indonesia.Key words : Formation of words , language Gaul , Youth Film Indonesia

ANALISIS POSTUR KERJA PADA PT. XYZ MENGGUNAKAN METODE ROSA (RAPID OFFICE STRAIN ASSESSMENT

Directory of Open Access Journals (Sweden)

Rosma Hani Damayanti

2014-06-01

Full Text Available Penggunaan teknologi informasi, dimana komputer sebagai medianya kini semakin meningkat. Frekuensi yang tinggi akan penggunaan komputer yang tidak memperhatikan sisi ergonomi dalam bekerja mengakibatkan adanya resiko yang dirasakan oleh pengguna. PT. XYZ merupakan salah satu perusahaan yang menggunakan komputer sebagai salah satu alat utama dalam bekerja. Pada penggunaannya karyawan pada Departemen Publishing merasakan keluhan pada punggung, pinggang, nyeri bahu, leher dan tangan. Keluhan yang dirasakan oleh pekerja pada Departemen publishing dapat diminimalkan dengan cara mengetahui dan mengidentifikasi postur kerja pada pekerja dalam menggunakan komputer. Identifikasi tersebut digunakan untuk mengetahui kondisi pekerja dan mengetahui penyebab keluhan yang dirasakan oleh pekerja untuk dilakukan perbaikan. Pada penelitian ini dilakukan analisis dengan menggunakan metode ROSA untuk mengurangi adanya keluhan yang dirasakan oleh pekerja pada Departemen publishing. ROSA merupakan salah satu metode pada office ergonomics, dimana penilaiannnya dirancang untuk mengukur resiko yang terkait dengan penggunaan komputer serta untuk menetapkan tingkat tindakan perubahan berdasarkan laporan dari ketidaknyamanan pekerja. Dengan menggunakan metode ROSA, dapat diketahui apakah postur kerja karyawan pada Departemen Publishing pada saat bekerja aman atau berbahaya. Hasil analisis postur kerja menggunakan metode ROSA pada Departemen Publishing menunjukkan bahwa seluruh pekerja yang menjadi sampel memiliki level resiko yang tinggi dan perlu dilakukan perbaikan segera. Perbaikan yang dapat dilakukan untuk mengurangi tingkat resiko yang dirasakan oleh pekerja yaitu dengan perbaikan fasilitas yang digunakan oleh pekerja yang sesuai dengan standar ergonomi, melakukan sosialisasi kepada pekerja tentang pentingnya ergonomi pada dunia kerja, dan sebaiknya pekerja melakukan istirahat atau peregangan otot minimal setiap tiga jam sekali.

ANALISIS POSTUR KERJA PADA PT. XYZ MENGGUNAKAN METODE ROSA (RAPID OFFICE STRAIN ASSESSMENT

Directory of Open Access Journals (Sweden)

Rosma Hani Damayanti

2014-06-01

Full Text Available Penggunaan teknologi informasi, dimana komputer sebagai medianya kini semakin meningkat. Frekuensi yang tinggi akan penggunaan komputer yang tidak memperhatikan sisi ergonomi dalam bekerja mengakibatkan adanya resiko yang dirasakan oleh pengguna. PT. XYZ merupakan salah satu perusahaan yang menggunakan komputer sebagai salah satu alat utama dalam bekerja. Pada penggunaannya karyawan pada Departemen Publishing merasakan keluhan pada punggung, pinggang, nyeri bahu, leher dan tangan. Keluhan yang dirasakan oleh pekerja pada Departemen publishing dapat diminimalkan dengan cara mengetahui dan mengidentifikasi postur kerja pada pekerja dalam menggunakan komputer. Identifikasi tersebut digunakan untuk mengetahui kondisi pekerja dan mengetahui penyebab keluhan yang dirasakan oleh pekerja untuk dilakukan perbaikan. Pada penelitian ini dilakukan analisis dengan menggunakan metode ROSA untuk mengurangi adanya keluhan yang dirasakan oleh pekerja pada Departemen publishing. ROSA merupakan salah satu metode pada office ergonomics, dimana penilaiannnya dirancang untuk mengukur resiko yang terkait dengan penggunaan komputer serta untuk menetapkan tingkat tindakan perubahan berdasarkan laporan dari ketidaknyamanan pekerja. Dengan menggunakan metode ROSA, dapat diketahui apakah postur kerja karyawan pada Departemen Publishing pada saat bekerja aman atau berbahaya. Hasil analisis postur kerja menggunakan metode ROSA pada Departemen Publishing menunjukkan bahwa seluruh pekerja yang menjadi sampel memiliki level resiko yang tinggi dan perlu dilakukan perbaikan segera.  Perbaikan yang dapat dilakukan untuk mengurangi tingkat resiko yang dirasakan oleh pekerja yaitu dengan perbaikan fasilitas yang digunakan oleh pekerja yang sesuai dengan standar ergonomi, melakukan sosialisasi kepada pekerja tentang pentingnya ergonomi pada dunia kerja, dan sebaiknya pekerja melakukan istirahat atau peregangan otot minimal setiap tiga jam sekali.

Teori Pecking Order dan Trade-Off dalam Analisis Struktur Modal di Bursa Efek Indonesia

Directory of Open Access Journals (Sweden)

D Agus Harjito

2014-06-01

Full Text Available AbstractThis study aims to test the pecking order theory and trade-off theory of capital structure in the analysis of the Indonesia Stock Exchange. Pecking order theory is represented by the variable profitability and growth, while the variables volatility of earnings, tangibility of assets and the size represents a trade-off theory. The company's goal is prosperity of shareholder value. To achieve these objectives the company needs funds from internal sources and external sources. Internal sources in the form of retained earnings, while the external sources of debt and shareholders' approval in the pecking order theory. This study uses the data of financial ratios of the firms during the period 2000-2010. To analyze the data, this study uses a multiple regression with the dependent variable is the debt ratio, while profitability, growth, volatility of earnings, tangibility of assets and size as independent variables. The results show that asset structure and company size has a positive and significant impact on capital structure, while profitability has a negative effect on debt ratios. But company's growth rate has not relationship with the debt ratio or capital structure. Simultaneously, the all independent variables affect capital structure significantly.Keywords: pecking order, trade-off, capital structure, debt rasioAbstrakPenelitian ini bertujuan untuk menguji teori pecking order dan teori trade-off dalam analisis struktur modal di Bursa Efek Indonesia. Teori pecking order diwakili oleh variabel profitability dan growth, sementara variabel-variabel volatility of earnings, tangibility of assets dan size mewakili teori trade-off. Tujuan perusahaan adalah memakmurkan nilai pemegang saham. Untuk mencapai tujuan tersebut perusahaan membutuhkan dana yang diperoleh dari sumber internal dan sumber eksternal. Sumber internal berupa laba ditahan, sedangkan sumber eksternal berupa hutang dan saham sebagaimana dijelaskan dalam teori pecking order

USULAN STRATEGI UNTUK MENINGKATKAN DAYA SAING PRODUK MEBEL ROTAN SINGLE CHAIR DENGAN ANALISIS RANTAI NILAI (Studi Kasus : Klaster Mebel Rotan Kab. Cirebon

Directory of Open Access Journals (Sweden)

Ary Arvianto

2013-06-01

Full Text Available Industri mebel rotan merupakan salah satu andalan sektor industri di Indonesia dimana sentra pengolahan rotan terbesar adalah di Kabupaten Cirebon, Jawa Barat. Namun, terdapat beberapa kendala dalam industri mebel rotan di Cirebon ini diantaranya semakin ketatnya persaingan antar produsen dunia dan kebijakan pemerintah memperbolehkan ekspor rotan yang menyebabkan keuntungan di pihak negara pesaing Oleh karena itu, dibutuhkan suatu strategi untuk meningkatkan daya saing  produk rotan di pasar dunia. Strategi ini dapat diperoleh dengan melakukan analisis value chain. Tujuan dari penelitian ini adalah untuk menganalisis rantai nilai produk mebel rotan dan mendapatkan strategi kompetitif yang tepat untuk diterapkan oleh setiap pelaku rantai nilai. Metode yang dilakukan adalah analisis finansial, analisis SWOT, analisis Competitiveness Diamond, dan analisis Critical Success Factor (CSF. Objek penelitian adalah perusahaan-perusahaan yang merupakan anggota dari Asosiasi Pengusaha Mebel Indonesia (ASMINDO Cirebon yang memproduksi mebel rotan single chair. Dari hasil pengolahan data dan analisis diperoleh hasil bahwa strategi yang dapat diterapkan di pihak supplier dalam hal ini pengumpul adalah mendirikan anak perusahaan di tempat tersedia bahan baku dan melakukan merger dengan perusahaan. Strategi yang dapat diterapkan di pihak perusahaan adalah menerapkan upah tenaga kerja per unit produk yang dihasilkan, pengalokasian dana untuk promosi, memprioritaskan buyer langganan, sharing informasi dan inovasi dengan buyer, memiliki fleksibilitas yang tinggi dalam hal kualitas dan harga, bekerjasama dengan asosiasi dan pemerintah dalam kegiatan pameran, dan melakukan merger dengan perusahaan lain ataupun dengan supplier. Sedangkan strategi yang dapat diterapkan di pihak buyer dalam hal ini wholeseller adalah menurunkan harga produk, memaksimalkan promosi dan menjaga hubungan baik dengan perusahaan yang sudah menjadi kepercayaan. Kata Kunci: mebel rotan, value

Data management in maintenance outsourcing

International Nuclear Information System (INIS)

Murthy, D.N.P.; Karim, M.R.; Ahmadi, A.

2015-01-01

Most businesses view maintenance as tasks carried out by technicians and the data collected is mostly cost related. There is a growing trend towards outsourcing of maintenance and the data collection issues are not addressed properly in most maintenance service contracts. Effective maintenance management requires proper data management - data collection and analysis for decision-making. This requires a proper framework and when maintenance is outsourced it raises several issues and challenges. The paper develops a framework for data management when maintenance is outsourced and looks at a real case study that highlights the need for proper data management. - Highlights: • Framework for data management in maintenance outsourcing. • Black-box to grey-box approaches for modelling. • Improvements to maintenance decision-making. • Case study to illustrate the approaches and the shortcomings in data collection

Analisis Potensi Ledakan dan Kebakaran Primary Reformer sebagai Unit Proses Produksi Amonia di PT. X

Directory of Open Access Journals (Sweden)

Resti Ayu Lestari

2016-12-01

Full Text Available Peningkatan industri pupuk di dunia berimplikasi pada peningkatan jumlah industri amonia. Amonia memegang peranan penting pada proses produksi pupuk dalam hal penyediaan nitrogen. Proses pembuatan amonia melibatkan bahan baku berupa gas alam yang bersifat flammable dengan temperatur dan tekanan yang tinggi dalam setiap tahapan prosesnya. Primary reformer merupakan salah satu peralatan proses dalam produksi amonia dengan temperatur dan tekanan paling tinggi serta paling berisiko mengalami kegagalan yang dapat mengakibatkan terjadinya kebakaran/ledakan. Primary reformer berperan sebagai salah satu tahapan pemurnian gas alam dengan hasil berupa karbon monoksida. Identifikasi bahaya pada unit primary reformer dilakukan dengan menggunakan metode Fault Tree Analysis (FTA. Hasil analisis FTA menghasilkan bahwa sumber bahaya dari ledakan primary reformer dapat ditinjau dari faktor teknis dan faktor non teknis. Faktor non teknis menyumbang 74% dari penyebab terjadinya ledakan/kebakaran pada primary reformer. Hasil analisis risiko ledakan/kebakaran pada primary reformer dilakukan dengan menggunakan Dow’s Fire & Explosion Index  dengan hasil radius area dampak adalah 51 meter. Nilai kerugian finansial mencapai US$ 23.640.285 dengan kerugian hari kerja minimal adalah 138 hari. Perangkat lunak Arial Location of Hazardous Atmospheres menghasilkan radius ledakan dengan dampak terkecil yaitu dapat memecahkan kaca jendela/pintu (0,5 psi adalah 73 m dari primary reformer. Radius ledakan dengan kekuatan ledakan 1 psi (meruntuhkan rumah/perkantoran adalah 48 m dari primary reformer.

BAHASA DAN IDEOLOGI: MENGUNGKAP IDEOLOGI DAN KEKUASAAN SIMBOLIK DI BALIK PENGGUNAAN BAHASA (KAJIAN TEKS MEDIA MELALUI ANALISIS WACANA KRITIS

Directory of Open Access Journals (Sweden)

Su haryo

2014-11-01

Full Text Available Abstrak   Tulisan ini didasari sebuah anggapan bahwa bahasa tidak berada di ruang hampa sosial.Maka, bahasa pada dasarnya bukan hanya untaian kata yang hanya bersifat linguistik, tetapi bersifat sosial. Karenanya, bahasa dipahami sebagai tindakan sosial.Implikasinya, bahasa bukan hanya bermatra linguistik, tetapi juga bermatra sosial. Van Dijk menjadi salah satu model yang dapat digunakan sebagai alat untuk menganalisis wacana secara kritis. Penelitian analisis wacana kritis model van Dijk mempertimbangkan teks, konteks, kognisi sosial, dan analisis/konteks sosial. Untuk mengungkap hal itu, langkah yang dapat dilakukan adalah: mengungkap struktur makro (tematik, suprstruktur (skematik, dan struktur mikro yang terdiri atas semantik, sintaksis, stilitistik, dan retorika. Untuk mengungkap hal itu, di sini digunakan metode simak dan catat dengan menjadikan Suara Merdeka dan Kompassebagai sumber datanya. Hasilnya pertama,SM cenderung berideologi kasar, provokatif, dan konotatif/figuratif. Hal itu, tampak pada pilihan kata/kalimat  kata yang cenderung kasar, seperti mengancam,menyerang, memanggil paksa, menyeret, menembak.Sementara, harian K cenderung berideologi idealisme pers yang objektif, netral, dan berimbang. Kedua, dari dimensi kekuasaan (simbolik, harian SM cenderung menjadi “oposisi”  dan “oposan”sebagai pihak yang di-dominan-kan, sedang pihak pemerintah sebagai pihak yang “dimarginalkan”. Sementara, harian K menempatkan pihak yang dominan/marginal lebih didasarkan pada kondisi objektif di lapangan yang  berbasis data dan keterangan yang dari narasumber yang cenderung netral, seperti pengamat, warga, dan akademisi; tidak didasarkan pada keterangan yang cenderung subjektif, seperti dari para politisi.Ketiga, dari sisi analisis sosial dan kognisi sosial; SM lebih tampak sebagai cerminan tagline-nya yaitu lokal (yaitu “perekat komunitas Jawa Tengah”, sedangkan harian K lebih “mengabdi” pada rakyat seperti tampak pada

ANALISIS MANFAAT BIAYA LINGKUNGAN USAHA TERNAK BABI: STUDI KASUS DI DESA AMBARKETAWANG KECAMATAN GAMPING KABUPATEN SLEMAN (Benefit Cost Analysis of Pig Farming Environment: Case Study at Ambarketawang Village, Gamping District, Sleman Regency, Indonesia

Directory of Open Access Journals (Sweden)

Tri Anggraeni Kusumastuti

2001-12-01

Full Text Available ABSTRAK Penelitian ini bertujuan untuk mengetahui pendapatan peternak dan kelayakan pengembangan usaha ternak babi secara finansial maupun ekonomi. Penelitian dilakukan di Kecamatan Gamping. Data yang digunakan adalah data primer dari responden peternak dan data sekunder dari instansi terkait. Analisis yang digunakan adalah analisis pendapatan metode R/C Ratio, NPV (Net Present Value, dan IRR (Internal Rate of Return dengan umur ekonomis kandang selama 3 tahun. Hasil penelitian menunjukkan bahwa analisis pendapatan secara finansial menghasilkan nilai lebih tinggi dibandingkan penilaian secara ekonomi. Jenis penggemukan memberikanpendapatan tertinggi secara finansial, sedangkan secaraekonomi, dengan memperhitungkan lingkungan, jenis kombinasi memberikan pendapatan tertinggi. Analisis sensitivitas menunjukkan bahwa penurunan harga babi berpengaruh terhadap penurunan pendapatan peternak dibandingkan peningkatan harga pakan dan peningkatan biaya lingkungan. Jenis pembibitan paling peka terhadap analisis sensitivitas, sedangkan jenis kombinasi penggemukan dan pembibitan tidak begitu terpengaruhi.   ABSTRACT The objectives of this research were to assess the farmer’s income and the feasibility of pig farming, financially as well as economically. The data used in this research were primary data from pig farmers and secondary data from relevant institution. Financial and economic analysis of income and feasibility study with NPV (Net Present Value, B/C ratio, IRR (Internal Rate of Return with economic barn value of 3 years, were applied in this research. The results showed that financially the fattening system gave the highest income, but the combination system was more efficient because it provided the highest income, but the combination system was more efficient because it provided the highest income, inspite of taking into consideration the environment effect. Sensitivity analysis showed that the pig price’s decline influenced the farmer�

Statistical analysis of the wind around a nuclear power plant; Analisis estadistico del viento alrededor de una central nucleoelectrica

Energy Technology Data Exchange (ETDEWEB)

Tejeda, A; Alvarez, Oscar; Contreras, A D; Jauregui, E [Universidad Veracruzana, (Mexico)

1997-12-31

In order to show an appropriate methodology for the climatic analysis of the wind, some of the recent results in the investigation of the field flow around the Laguna Verde Nuclear Power Station, at Veracruz State (Mexico,) through the angular correlation coefficients and contingency tables among the registered wind directions by a meteorological tower at the levels of 10 and 60 meters high are presented. Finally, by applying an objective analysis of the data some conclusions are obtained in connection with the local winds with the mesoscale systems. [Espanol] Con el objeto de mostrar una metodologia apropiada en el analisis climatico del viento, se presentan algunos resultados recientes en la investigacion del campo de flujo en los alrededores de la central nucleoelectrica de Laguna Verde, Veracruz (Mexico), a traves de los coeficientes de correlacion angulares y de tablas de contingencia entre las direcciones del viento registradas por una torre meteorologica en los niveles de 10 y 60 metros de altura. Finalmente, aplicando analisis objetivo de los datos, se obtienen algunas conclusiones sobre la conexion de los vientos locales con los sistemas de mesoescala.

Statistical analysis of the wind around a nuclear power plant; Analisis estadistico del viento alrededor de una central nucleoelectrica

Energy Technology Data Exchange (ETDEWEB)

Tejeda, A; Alvarez, Oscar; Contreras, A. D.; Jauregui, E. [Universidad Veracruzana, (Mexico)

1996-12-31

In order to show an appropriate methodology for the climatic analysis of the wind, some of the recent results in the investigation of the field flow around the Laguna Verde Nuclear Power Station, at Veracruz State (Mexico,) through the angular correlation coefficients and contingency tables among the registered wind directions by a meteorological tower at the levels of 10 and 60 meters high are presented. Finally, by applying an objective analysis of the data some conclusions are obtained in connection with the local winds with the mesoscale systems. [Espanol] Con el objeto de mostrar una metodologia apropiada en el analisis climatico del viento, se presentan algunos resultados recientes en la investigacion del campo de flujo en los alrededores de la central nucleoelectrica de Laguna Verde, Veracruz (Mexico), a traves de los coeficientes de correlacion angulares y de tablas de contingencia entre las direcciones del viento registradas por una torre meteorologica en los niveles de 10 y 60 metros de altura. Finalmente, aplicando analisis objetivo de los datos, se obtienen algunas conclusiones sobre la conexion de los vientos locales con los sistemas de mesoescala.

An assessment of econometric models applied to fossil fuel power generation; Un'analisi critica dell'applicazione dei modelli econometrici alla generazione termoelettrica

Energy Technology Data Exchange (ETDEWEB)

Gracceva, F.; Quercioli, R. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy)

2001-07-01

The main purpose of this report is to provide a general view of those studies, in which the econometric approach is applied to the selection of fuel in fossil fired power generation, focusing the attention to the key role played by the fuel prices. The report consists of a methodological analysis and a survey of the studies available in literature. The methodological analysis allows to assess the adequateness of the econometric approach, in the electrical power utilities policy. With this purpose, the fundamentals of microeconomics, which are the basis of the econometric models, are pointed out and discussed, and then the hypotheses, which are needed to be assumed for complying the economic theory, are verified in their actual implementation in the power generation sector. The survey of the available studies provides a detailed description of the Translog and Logit models, and the results achieved with their application. From these results, the estimated models show to fit the data with good approximation, a certain degree of interfuel substitution and a meaningful reaction to prices on demand side. [Italian] In questo rapporto viene tracciato un quadro generale degli studi che utilizzano modelli econometrici per analizzare la scelta dei combustibili nella termogenerazione, con particoalre attenzione al ruolo svolto dal prezzo dei combustibili. La trattazione si compone di un'analisi di tipo metodologico e di una rassegna della letteratura. L'analisi metodologica consente di valutare l'adeguatezza dell'approccio econometrico nell'analisi del comportamento delle imprese di generazione elettrica. A tal fine vengono esplicitati e discussi i fondamenti microeconomici su cui poggiano i modelli econometrici, e viene verificata la sussistenza, nel settore termoelettrico, delle ipotesi che e' necessario assumere per soddisfare la teoria economica. La rassegna fornisce invece una descrizione dei modelli translog e logit lineare, ed un'analisi

Ambiente sonoro e percezione di alcune caratteristiche dei parchi urbani: analisi e modelli - Sonic environment and perception of some features of urban parks: analysis and models

Directory of Open Access Journals (Sweden)

Giovanni Brambilla

2016-07-01

Full Text Available Sui dati raccolti in otto parchi urbani, comprendenti alcuni parametri acustici e le valutazioni dei fruitori sulla qualità complessiva del parco percepita e di alcune sue caratteristiche, si è proceduto a diverse analisi statistiche. L’analisi delle componenti principali e quella cluster gerarchica sui dati acustici ha fornito una classificazione in tre gruppi risultata poco sovrapponibile a quella ottenuta con l’analisi cluster e delle corrispondenze multiple condotta sui responsi soggettivi. La discrepanza, confermata anche da alcuni modelli di regressione logistica multinomiale, evidenzia l’influenza di altri fattori non acustici sulla percezione dell’ambiente dei parchi urbani. ------ Different statistical analyses have been carried out on data collected in eight urban parks, including some acoustical parameters and the appraisals of park visitors on the perceived overall quality of the park and some of its features. Principal component analysis and hierarchical cluster one on the acoustic data have identified three groups. This classification poorly overlaps that obtained by hierarchical cluster analysis and multiple correspondence one performed on subjective appraisals data. The difference, confirmed also by models developed by multinomial logistic regression, points out the influence of other non-acoustic factors on the perception of the urban parks environment.

Suncor maintenance and reliability

Energy Technology Data Exchange (ETDEWEB)

Little, S. [Suncor Energy, Calgary, AB (Canada)

2006-07-01

Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

Maintenance Process Strategic Analysis

Science.gov (United States)

Jasiulewicz-Kaczmarek, M.; Stachowiak, A.

2016-08-01

The performance and competitiveness of manufacturing companies is dependent on the availability, reliability and productivity of their production facilities. Low productivity, downtime, and poor machine performance is often linked to inadequate plant maintenance, which in turn can lead to reduced production levels, increasing costs, lost market opportunities, and lower profits. These pressures have given firms worldwide the motivation to explore and embrace proactive maintenance strategies over the traditional reactive firefighting methods. The traditional view of maintenance has shifted into one of an overall view that encompasses Overall Equipment Efficiency, Stakeholders Management and Life Cycle assessment. From practical point of view it requires changes in approach to maintenance represented by managers and changes in actions performed within maintenance area. Managers have to understand that maintenance is not only about repairs and conservations of machines and devices, but also actions striving for more efficient resources management and care for safety and health of employees. The purpose of the work is to present strategic analysis based on SWOT analysis to identify the opportunities and strengths of maintenance process, to benefit from them as much as possible, as well as to identify weaknesses and threats, so that they could be eliminated or minimized.

Analisis Six Sigma pada Produk Casing Pompa sebagai Metode Perbaikan Kualitas (Studi Kasus: PT. Zenith Allmart Precisindo)

OpenAIRE

Haryono, Haryono; Rakasiwi, Hafiedza Pradana

2014-01-01

Pada Februari 2014, produk baja terbanyak yang diproduksi PT. Zenith Allmart Precisindo (ZAP) adalah casing pompa dengan reject sebesar 3,35%, padahal target maksimal reject 2% per bulan, ada gap sebesar 1,35%. Analisis DMAIC Six Sigma dilaksanakan untuk mengurangi persentase reject. Pada define, ditentukan project charter, peta proses produksi, dan SIPOC diagram. Dari SIPOC diagram ditentukan 10 CTQ. Pada fase measure dilakukan attribute agreement analysis untuk QC, hasilnya adalah repeabili...

Analisis Niat Penggunaan E-filing Di PT “X” Dan Pt”y” Surabaya Dengan Structural Equation Modeling

OpenAIRE

Jimantoro, Christina; Tjondro, Elisa

2014-01-01

Penelitian ini dilakukan untuk mengetahui pengaruh persepsi kegunaan, persepsi kemudahan, sikap penggunaan, norma subjektif dan persepsi kemampuan mengontrol terhadap niat penggunaan e-filing oleh wajib pajak orang pribadi. Sampel penelitian ini adalah 64 karyawan PT “X” dan PT “Y” di Surabaya. Teknik analisis data yang digunakan adalah Structural Equation Modelling berbasis Variance (Partial Least Square).Hasil penelitian ini menunjukkan adanya pengaruh persepsi kegunaan dan kemudahan terhad...

ANALISIS PENERAPAN STRATEGI PEMASARAN DALAM PENINGKATAN PANGSA PASAR PADA PT. HADJI KALLA (TOYOTA) CABANG URIP DI MAKASSAR

OpenAIRE

MAULADI RAHMAN, EKI

2012-01-01

- EKI MAULADI RAHMAN, A211 076 644. Analisis Penerapan Strategi Pemasaran Dalam Peningkatan Pangsa Pasar Pada PT. Hadji Kalla (Toyota) Cabang Urip di Makassar. (dibimbing oleh Muhammad Ismail dan Mukhtar) Tujuan dari penelitian ini adalah untuk mengetahui penerapan strategi pemasaran mobil Toyota pada PT. Hadji Kalla (Toyota) Cabang Urip di Makassar melalui penerapan (produk, harga, promosi dan saluran distribusi) dalam peningkatan pangsa pasar, untuk menganlisis sejauh mana penerapan ...

Analisi dell’anisotropia microstrutturale in materiali compositi rinforzati con fibre corte

Directory of Open Access Journals (Sweden)

D. Dreossi

2008-01-01

Full Text Available La microtomografia con luce di sincrotrone si è rivelata una tecnica particolarmente efficace per l’analisi della struttura risultante dalla distribuzione degli orientamenti assunti dalle fibre di rinforzo di compositi rinforzati con fibre di vetro. La ricostruzione dell'immagine tridimensionale ha consentito la visualizzazionedella distribuzione spaziale delle fibre all'interno della matrice polimerica anche nel caso di fibre di piccole dimensioni (diametro medio di 10 micrometri. E' stato quindi possibile misurare le differenze nell'orientamento delle fibre nei differenti strati di un campione utilizzando metodi basati sulla valutazione del Mean Intercept Length (MIL e del fabric tensor. La tecnica descritta è stata applicata a un campione di poliammide 6 rinforzato con il 30% di fibre corte di vetro ricavato da lastra.

Building Maintenance, Management, and Budgeting.

Science.gov (United States)

Pawsey, M. R.

1982-01-01

Australian methods and formulas for funding building maintenance and management are outlined and found to be haphazard. Discussed are: ultimate costs of deferred maintenance, major plant replacements, life cycle costing, types of maintenance programs (including full preventive maintenance), use of computer programs for planning, and organization…

Maintenance performance improvement with System Dynamics : A Corrective Maintenance showcase

NARCIS (Netherlands)

Deenen, R.E.M.; Van Daalen, C.E.; Koene, E.G.C.

2008-01-01

This paper presents a case study of an analysis of a Corrective Maintenance process to realize performance improvement. The Corrective Maintenance process is supported by SAP, which has indicated the performance realisation problem. System Dynamics is used in a Group Model Building process to

Analysis of maintenance strategies

International Nuclear Information System (INIS)

Laakso, K.; Simola, K.

1998-01-01

The main topics of the presentation include: (1) an analysis model and methods to evaluate maintenance action programs and the support decision to make changes in them and (2) to understand the maintenance strategies in a systems perspective as a basis for future developments. The subproject showed how systematic models for maintenance analysis and decision support, utilising computerised and statistical tool packages, can be taken into use for evaluation and optimisation of maintenance of active systems from the safety and economic point of view

23 CFR 633.208 - Maintenance.

Science.gov (United States)

2010-04-01

... responsibility of the State. The State may arrange for maintenance of such roads or portions thereof, by... 23 Highways 1 2010-04-01 2010-04-01 false Maintenance. 633.208 Section 633.208 Highways FEDERAL... PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.208 Maintenance. Maintenance of all highway...

Correlacion entre metodos de analisis de Zn disponible en cuatro ordenes de suelos de Costa Rica

OpenAIRE

Eloy Molina; Elemer Bornemisza

2001-01-01

Se realizo una comparación entre métodos analisis del Zn disponible en 4 ordenes de sue- Analytilos de Costa Rica (Ultisoles, Vertisoles, Andisoles Inceptisoles, 25 de c/u), utilizando las siguientes soluciones extractoras: Olsen Modificado, Meh- lich 3, Morgan Modificado, DTPA y HC1. Las cantidades de Zn extrafdas dependieron de la natu- raleza qufmica de la solucion extractora. El HCl presento los contenidos mas altos de Zn en los chasuelos, excepto en Vertisoles....

ANALISIS DEKONSTRUKSI TOKOH TAKESHI DAN MITSUSABURO DALAM NOVEL SILENT CRY KARYA KENZABURO OE PERSPEKTIF JACQUES DERRIDA

Directory of Open Access Journals (Sweden)

Abd. Ghofur

2015-12-01

Full Text Available This article is a little result done by the writer, in which critical analisys discourse study as a tool to learn literature. It is Kenzaburo Oe’s writing, a Japan writer who got Pulitzer or noble in literature. It employs Jaques Derrida deconstructive theory, while the researcher focuses on binary opposition.  When deconstruction used, it will expose inside of the text, furthermore it produces other meaning or different point of view from the real text.

ANALISIS STRUKTUR MIKRO LAPISAN BOND COAT NIAL THERMAL BARRIER COATING (TBC PADA PADUAN LOGAM BERBASIS CO

Directory of Open Access Journals (Sweden)

Toto Sudiro

2012-11-01

Full Text Available Kehandalan dan umur pakai sistem Thermal Barrier Coating (TBC ditentukan oleh kestabilan lapisan bond coat dan thermal grown oxide (TGO. Sehingga sangatlah penting untuk memahami mekanisme pembentukan dan degradasi lapisan ini. Pada makalah ini akan dibahas analisis struktur mikro lapisan bond coat NiAl yang dideposisikan pada substrat CoCrNi dengan menggunakan gabungan metoda electroplating dan pack-cementation. Pada makalah ini juga dibahas mekanisme pembentukan void disepanjang interface bond coat¬-substrat setelah tes oksidasi.

KLASIFIKASI INTI SEL PAP SMEAR BERDASARKAN ANALISIS TEKSTUR MENGGUNAKAN CORRELATION-BASED FEATURE SELECTION BERBASIS ALGORITMA C4.5

Directory of Open Access Journals (Sweden)

Toni Arifin

2014-09-01

Full Text Available Abstract - Pap Smear is an early examination to diagnose whether there’s indication cervical cancer or not, the process of observations were done by observing pap smear cell under the microscope. There’s so many research has been done to differentiate between normal and abnormal cell. In this research presents a classification of pap smear cell based on texture analysis. This research is using the Harlev image which amounts to 280 images, 140 images are used as training data and 140 images other are used as testing. On the texture analysis used Gray level Co-occurance Matrix (GLCM method with 5 parameters that is correlation, energy, homogeneity and entropy added by counting the value of brightness. For choose which the best attribute used correlation-based feature selection method and than used C45 algorithm for produce classification rule. The result accuracy of the classification normal and abnormal used decision tree C45 is 96,43% and errors in predicting is 3,57%. Keywords : Classification, Pap Smear cell image, texture analysis, Correlation-based feature selection, C45 algorithm. Abstrak - Pap Smear merupakan pemeriksaan dini untuk mendiagnosa apakah ada indikasi kanker serviks atau tidak, proses pengamatan dilakukan dengan mengamati sel pap smear dibawah mikroskop. Banyak penelitian yang telah dilakukan untuk membedakan antara sel normal dan abnormal. Dalam penelitian ini menyajikan klasifikasi inti sel pap smear berdasarkan analisis tektur. Citra yang digunakan dalam penelitian ini adalah citra Harlev yang berjumlah 280 citra, 140 citra digunakan sebagai data training dan 140 citra lain digunakan sebagai testing. Pada analisis tekstur mengunakan metode Gray level Co-occurrence Matrix (GLCM menggunakan 5 parameter yaitu korelasi, energi, homogenitas dan entropi ditambah dengan menghitung nilai brightness. Untuk memilih mana atribut terbaik digunakan metode correlation-based feature selection lalu digunakan algoritma C45 untuk

Analisis Implementasi Akuntansi Berbasis Akrual pada Inspektorat Jenderal Kementerian Keuangan

Directory of Open Access Journals (Sweden)

Eliada Herwiyanti

2017-05-01

Full Text Available Penelitian ini merupakan penelitian kualitatif terhadap penerapan Sistem Akuntansi Pemerintahan berbasis akrual di lingkungan Inspektorat Jenderal Kementerian Keuangan. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana kesiapan dan penerapan SAP Berbasis Akrual di instansi tersebut. Data dalam penelitian ini dikumpulkan melalui observasi, studi kepustakaan, serta wawancara terhadap sepuluh orang informan yang terkait langsung dengan penerapan SAP berbasis akrual. Data yang telah dikumpulkan kemudian dianalisis dan diinterpretasikan secara naratif dengan menggunakan metode analisis data kualitatif yang direkomendasikan oleh Creswell (2012. Hasil penelitian ini menunjukkan bahwa secara umum, kesiapan Itjen Kemenkeu dalam menerapkan sistem akuntansi akrual sudah baik, mulai dari aspek komunikasi, sumber daya, komitmen organisasi, dan struktur birokrasi. Dengan kesiapan yang baik, penelitian ini juga menun­juk­kan bahwa penerapan sistem akuntansi akrual di Itjen Kemenkeu sudah dilakukan dengan sangat memuaskan, yang ditunjukkan dengan nilai sebesar 93,40%.

ANALISIS LEMBAR KERJA SISWA DALAM MENINGKATKAN KOMUNIKASI MATEMATIS TULIS SISWA

Directory of Open Access Journals (Sweden)

Fimmatur Rizka Ardina

2016-02-01

Komunikasi merupakan suatu kemampuan yang penting untuk dimiliki setiap manusia. Komunikasi dalam artikel ini difokuskan pada komunikasi matematis tulis. Komunikasi matematis tulis ini akan berhubungan dengan lembar kerja siswa yang dipakai dalam proses pembelajaran. Tujuan penulisan artikel ini adalah untuk mendeskripsikan proses analisis LKS sebagai alat untuk meningkatkan komunikasi matematis tulis siswa. Jenis penelitian yang digunakan adalah kualitatif deskriptif. LKS akan dianalisis menggunakan standar indikator kemampuan komunikasi NCTM (2000 yang dimodifikasi sehingga terdapat empat indikator yaitu (1 siswa dapat menuliskan ide yang dimiliki dengan jelas dan tepat (2 siswa dapat menuliskan alasan untuk jawaban yang diberikan (3 siswa dapat memberikan tanggapan untuk ide atau jawaban siswa lain (4 siswa dapat menuliskan kembali ide orang lain menggunakan bahasanya sendiri. Berdasarkan hasil penelitian dapat disimpulkan bahwa LKS oleh Tim MGMP Kota Malang tidak dapat digunakan sebagai alternatif untuk meningkatkan kemmapuan komunikasi matematis tulis siswa.

Asphalt in Pavement Maintenance.

Science.gov (United States)

Asphalt Inst., College Park, MD.

Maintenance methods that can be used equally well in all regions of the country have been developed for the use of asphalt in pavement maintenance. Specific information covering methods, equipment and terminology that applies to the use of asphalt in the maintenance of all types of pavement structures, including shoulders, is provided. In many…

CANDU plant maintenance: Recent developments

International Nuclear Information System (INIS)

Charlebois, P.

2000-01-01

CANDU units have long been recognized for their exceptional safety and reliability. Continuing development in the maintenance area has played a key role in achieving this performance level. For over two decades, safety system availability has been monitored closely and system maintenance programs adjusted accordingly to maintain high levels of performance. But as the plants approach mid life in a more competitive environment and component aging becomes a concern, new methods and techniques are necessary. As a result, recent developments are moving the maintenance program largely from a corrective and preventive approach to predictive and condition based maintenance. The application of these techniques is also being extended to safety related systems. These recent developments include use of reliability centred methods to define system maintenance requirements and strategies. This approach has been implemented on a number of systems at Canadian CANDU plants with positive results. The pilot projects demonstrated that the overall maintenance effort remained relatively constant while the system performance improved. It was also possible to schedule some of the redundant component maintenance during plant operation without adverse impact on system availability. The probabilistic safety assessment was found to be useful in determining the safety implications of component outages. These new maintenance strategies are now making use of predictive and condition based maintenance techniques to anticipate equipment breakdown and schedule preventive maintenance as the need arises rather than time based. Some of these techniques include valve diagnostics, vibration monitoring, oil analysis, thermography. Of course, these tools and techniques must form part of an overall maintenance management system to ensure that maintenance becomes a living program. To facilitate this process and contain costs, new information technology tools are being introduced to provide system engineers

Maintenance analysis method and operational feedback: a comprehensive maintenance management

International Nuclear Information System (INIS)

Mathieu Riou; Victor Planchon

2006-01-01

Full text of publication follows: Current periodic inspections program carried out on the COGEMA LOGISTICS casks is required by regulations and approved by the competent Authority. Thus, Safety and casks conformity to the according certificate of approval are guaranteed. Nonetheless, based on experience it appeared that some maintenance operations did not seem relevant or were redundant. Then, it was decided to rethink completely our maintenance program to reach the following objectives: - Set up the 'a minima' required inspection operations required to guarantee Safety and conformity to the certificate of approval, - Optimize criteria and periodicities of inspections taking into account: operational feedback, routine inspections carried out for each transport, regulations, environmental impact (ALARA, waste reduction,...), cost-effectiveness (reduction of cask's immobilization period,...). - Set up a maintenance program in Safety Analysis Reports that: stands alone (no need to check the specification or the certificate of approval to have the complete list of inspections mandatory to guarantee Safety), gives objectives instead of means of controls. This approach needs then to be re-evaluated by the competent Authority. Study's scope has been limited to the TN TM 12 cask family which is intensely used. COGEMA LOGISTICS has a high operational feedback on these casks. After Authority agreement, and in accordance with its requirements, study will then be extended to the other casks belonging to the COGEMA LOGISTICS cask fleet. Actually, the term 'maintenance' is linked to 'Base maintenance' and 'Main maintenance' and implicitly means that the cask is immobilized for a given period. To emphasize the modifications, the term 'maintenance' is no longer used and is substituted by 'periodic upkeep'. By changing the name, COGEMA LOGISTICS wants to emphasize that: some operations can for instance be realized while the cask is unloaded, periodicities are thought in terms of

Dukovany NPP maintenance management

International Nuclear Information System (INIS)

Siegel, F.

2005-01-01

Maintenance planning and management for the technological equipment of the Dukovany NPP are described. A Maintenance Control and Evaluation System has been developed and is in use to help manage the complex maintenance issue. Practical examples of outputs of the System, with a comprehensive use of the cost, reliability and safety related data, are presented. (author)

PENGEMBANGAN MODEL PREDIKSI MADDEN-JULIAN OSCILLATION (MJO BERBASIS HASIL ANALISIS DATA WIND PROFILER RADAR (WPR

Directory of Open Access Journals (Sweden)

Naziah Madani

2014-07-01

Full Text Available Latar belakang penelitian ini adalah pentingnya kajian mengenai MJO sebagai salah satu osilasi dominan di kawasan ekuator. Penelitian ini bertujuan untuk membuat model prediksi MJO berdasarkan analisis data WPR. Pada penelitian ini kejadian MJO diidentifikasi dari data kecepatan angin zonal pada lapisan 850 mb di kawasan Pontianak, Manado, dan Biak. Sebelum data angin zonal ini dimanfaatkan untuk melihat perilaku MJO, maka data angin tersebut  terlebih dahulu dibandingkan dengan data indeks MJO yaitu RMM1 dan RMM2. RMM1 dan RMM2 merupakan sepasang indeks untuk memonitor kejadian MJO secara realtime. Hasil analisis Power Spectral Density (PSD data kecepatan angin zonal lapisan 850 mb menunjukkan adanya sinyal MJO kuat yang dicirikan dengan adanya osilasi sekitar 45 harian. Hasil korelasi dan regresi juga menunjukkan bahwa terdapat keterkaitan yang signifikan antara kedua data tersebut. Hal tersebut mengindikasikan bahwa data kecepatan angin zonal lapisan 850 mb dapat digunakan untuk analisis MJO. Pada penelitian ini, prediksi MJO didasarkan pada data kecepatan angin zonal menggunakan metode ARIMA Box-Jenkins. Melalui metode ini, model yang mendekati data deret waktu kecepatan angin zonal pada lapisan 850 mb di Pontianak adalah ARIMA(2,0,0, model prediksi untuk Manado adalah ARIMA(2,1,2, sedangkan untuk Biak adalah ARIMA(0,1,3. Model-model tersebut bermanfaat untuk melihat perilaku sinyal MJO pada data angin zonal berkaitan dengan pola curah hujan di wilayah kajian.   Background of this research is to study the importance of MJO as one of the predominant peak oscillation in the equator area. This study aims to make prediction models of MJO based on the analysis of zonal wind speed data observed by WPR that compared by the MJO index data, namely RMM1 and RMM2. The results of PSD show strong MJO signal of 45 day periods oscillations. The result of corrrelation and regression analyses also show significant relationship between both data. Therefore

ANALISIS TINGKAT KEPUASAN PELANGGAN TERHADAP MUTU LAYANAN ANTAR (DELIVERY SERVICE) DI RESTORAN KFC CABANG AHMAD YANI MAKASSAR

OpenAIRE

AMRENY, FANY FEBRIANY

2012-01-01

Fany Febriany Amreny (I 311 07 053). Analisis Tingkat Kepuasan Pelanggan terhadap Mutu Layanan Antar di Restoran KFC Cabang Ahmad Yani Makassar. Dibawah Bimbingan Ir. Sofyan nurdin Kasim, M.S sebagai Pembimbing Utama dan Ir. Veronica Sri Lestari, M.Ec sebagai Pembimbing Anggota. Perkembangan dan peningkatan jasa pelayanan pada restoran fast food dari tahun ke tahun semakin menjadi perhatian masyarakat yang dapat dilihat dari ketatnya persaingan yang menyebabkan suatu restoran perlu melaku...

Valutazione dell'appropriatezza dei ricoveri in un Policlinico Universitario: analisi mediante l'uso comparativo dei sistemi di classificazione isogravitá APR-DRG e Disease Staging e del PRUO

Directory of Open Access Journals (Sweden)

M. Volpe

2003-05-01

Full Text Available

Obiettivi: valutare l’appropriatezza organizzativa dei ricoveri effettuati in un Policlinico Universitario attraverso la comparazione di due metodi, dei quali uno basato sui dati della scheda di dimissione ospedaliera ed utilizza, rispettivamente, i sistemi di classificazione iso-gravità APR-DRG e Disease Staging e l’altro sulla revisione delle cartelle cliniche mediante il PRUO.

Metodi: oggetto di analisi sono i ricoveri ordinari effettuati nell’anno 2001 ed afferenti ai DRG inclusi nella delibera della Giunta Regionale del Lazio 864/2002 che recepisce il D.P.C.M. 29/11/2001 sui livelli essenziali di assistenza.

Risultati: i risultati evidenziano che le due varianti del
metodo basato sulla SDO (metodo APPRO mostrano quote di ricoveri inappropriati sovrapponibili rispetto al complesso dei ricoveri oggetto di analisi, ma con differenze anche rilevanti tra APR-DRG e Disease Staging in relazione ai singoli DRG considerati, riconducibili ai diversi algoritmi di attribuzione del livello di severità utilizzati dai due sistemi. L’analisi campionaria effettuata con il metodo PRUO su casi afferenti ai DRG della DGR 864/2002 caratterizzati da livelli di severità minimi evidenzia una proporzione di ricoveri inappropriati superiore a quella determinata tramite i metodi basati sulla SDO. Tale differenza è verosimilmente dovuta al ruolo del valore delle soglie percentuali di accettabilità individuate dalla Regione Lazio per ciascun DRG: le quote di ricoveri che eccedono tali soglie sono considerate inappropriate.

Conclusioni: sulla base dei risultati ottenuti gli autori
descrivono gli interventi organizzativi adottati per ottimizzare il contesto di erogazione delle prestazioni
oggetto di analisi, discutono vantaggi e limiti dei metodi SDO-based e del metodo analitico PRUObased e ne propongono l�

Machine Maintenance Scheduling with Reliability Engineering Method and Maintenance Value Stream Mapping

Science.gov (United States)

Sembiring, N.; Nasution, A. H.

2018-02-01

Corrective maintenance i.e replacing or repairing the machine component after machine break down always done in a manufacturing company. It causes the production process must be stopped. Production time will decrease due to the maintenance team must replace or repair the damage machine component. This paper proposes a preventive maintenance’s schedule for a critical component of a critical machine of an crude palm oil and kernel company due to increase maintenance efficiency. The Reliability Engineering & Maintenance Value Stream Mapping is used as a method and a tool to analize the reliability of the component and reduce the wastage in any process by segregating value added and non value added activities.

PROCESS OF CHANGES OF MAINTENANCE-FREE ONBOARD SYSTEM OPERATIONAL STATUS BETWEEN SCHEDULED MAINTENANCES

Directory of Open Access Journals (Sweden)

Andrey Mikhaylovich Bronnikov

2017-01-01

Full Text Available In this article the authors consider the problem of simulating the process of a maintenance-free between scheduled maintenance aircraft system operational status changes, which failure during the flight leads to the disaster. On-board equipment with automatic self-repair between routine maintenance in the event the components fail is called maintenance-free. During operation, onboard equipment accumulates failures maintaining its functions with a safety level not lower than the required minimum. Trouble shooting is carried out either at the end of between-maintenance period (as a rule, or after the failure, which led to the functions disorder or to the decrease below the target level of flight safety (as an exception. The system contains both redundant and nonredundant units and elements with the known failure rates. The system can be in one of the three states: operable, extreme, failed. The excessive redundant elements allow the system to accumulate failures which are repaired during the routine maintenance. The process of system operational status changes is described with the discrete-continuous model in the flight time. Basing on the information about the probabilities of the on-board equipment being in an operable, extreme or failed state, it is possible to calculate such complex efficiency indicators as the average loss of sorties, the average operating costs, the expected number of emergency recovery operations and others. Numerical studies have been conducted to validate the proposed model. It is believed that maintenance work completely updates the system. The analysis of these indicators will allow to evaluate the maintenance-free aircraft equipment operation efficiency, as well as to make an effectiveness comparison with other methods of technical operation. The model can be also used to assess the technical operation systems performance. The model can be used to optimize the period between maintenance.

Maintenance Trades Guidelines

Science.gov (United States)

Weidner, Theodore J.

2008-01-01

In 2002, APPA published "Maintenance Staffing Guidelines for Educational Facilities," the first building maintenance trades staffing guideline designed to assist educational facilities professionals with their staffing needs. addresses how facilities professionals can determine the appropriate size and mix of their organization. Contents…

ANALISIS KEBIJAKAN LINKAGE PROGRAM LEMBAGA KEUANGAN SYARIAH DALAM RANGKA PEMBERDAYAAN UKM DI INDONESIA

Directory of Open Access Journals (Sweden)

Siti Hamidah

2016-03-01

Linkage program adalah program yang menghubungkan bank dengan pelaku usaha mikro kecil melalui lembaga keuangan mikro. Kelemahan dalam Linkage program adalah pada aspek peraturan yang tersebar dalam berbagai aturan, dan khusus bagi lembaga keuangan syariah terdapat pula kendala berkaitan dengan kesesuaian dengan ketentuan syariah. Dari penelitian dengan pendekatan perundang-undangan dan pendekatan konseptual ini diperoleh inventarisasi serta analisis kebijakan Linkage Program bagi Lembaga Keuangan Syariah dalam hukum positif Indonesia. Kebijakan terkait Linkage program, diklasifikasi dalam 2 kelompok, yaitu kebijakan substansi dan prosedural. Aturan inilah yang menjadi rujukan bagi lembaga keuangan syariah rangka pemberdayaan usaha kecil mikro di Indonesia. Kata kunci: Linkage program, lembaga keuangan syariah, usaha mikro kecil

Optimization of surface maintenance

International Nuclear Information System (INIS)

Oeverland, E.

1990-01-01

The present conference paper deals with methods of optimizing the surface maintenance of steel-made offshore installations. The paper aims at identifying important approaches to the problems regarding the long-range planning of an economical and cost effective maintenance program. The methods of optimization are based on the obtained experiences from the maintenance of installations on the Norwegian continental shelf. 3 figs

ANALISIS PERUBAHAN KURIKULUM PADA PROSES PEMBELAJARAN PENDIDIKAN JASMANI OLAHRAGA DAN KESEHATAN DI SEKOLAH DASAR

Directory of Open Access Journals (Sweden)

Slamet Yulianto

2017-01-01

Tujuan penelitian ini adalah untuk mengetahui perubahan proses pembelajaran PJOK yang dilakukan guru seiring dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru. Penelitian ini menggunakan pendekatan penelitian kualitatif dengan jenis fenomenologi untuk menggali data alamiah dari subjek guru PJOK. Pengumpulan data dilakukan oleh peneliti sebagai instrumen kunci dengan teknik wawancara, observasi, dan analisis dokumen kepada subjek guru PJOK di SD inti kota Malang. Hasil penelitian menunjukkan bahwa, guru PJOK telah memenuhi standar profesi guru, guru PJOK telah memahami konsep perubahan kurikulum dan konsep PJOK, namun proses pembelajaran PJOK tidak maksimal sesuai dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru.

Nuclear maintenance and management system

International Nuclear Information System (INIS)

Yamaji, Yoshihiro; Abe, Norihiko

2000-01-01

The Mitsubishi Electric Co., Ltd. has developed to introduce various computer systems for desk-top business assistance in a power plant such as system isolation assisting system, operation parameter management system, and so on under aiming at business effectiveness since these ten and some years. Recently, by further elapsed years of the plants when required for further cost reduction and together with change of business environment represented by preparation of individual personal computer, further effectiveness, preparation of the business environment, and upgrading of maintenance in power plant business have been required. Among such background, she has carried out various proposals and developments on construction of a maintenance and management system integrated the business assistant know-hows and the plant know-hows both accumulated previously. They are composed of three main points on rationalization of business management and document management in the further effectiveness, preparation of business environment, TBM maintenance, introduction of CBM maintenance and introduction of maintenance assistance in upgrading of maintenance. Here was introduced on system concepts aiming at the further effectiveness of the nuclear power plant business, preparation of business environment, upgrading of maintenance and maintenance, and so on, at a background of environment around maintenance business in the nuclear power plants (cost-down, highly elapsed year of the plant, change of business environment). (G.K)

Analisis Kadar Kofein Kopi Luwak Dengan Variasi Jenis Kopi, Spesies Luwak Dan Cara Pengolahan Dengan Metoda TlC Scanner

Directory of Open Access Journals (Sweden)

Rahma Yulia

2016-07-01

Full Text Available Telah dilakukan penelitian analisis kadar kofein kopi luwak dengan variasi jenis kopi, spesies luwak dan cara pengolahan dengan metoda TLC Scanner. Analisis dilakukan dengan menggunakan 8 sampel kopi luwak R.Ab.K ; R.Ab.B ; R.Ph.K ; R.Ph.B ; A.Ab.K ; A.Ab.B ; A.Ph.K ; A.Ph.B yang diekstraksi dengan pelarut diklorometana ( DCM . Pemisahan dengan KLT dilakukan dengan fasa diam plat silika gel GF254 dan fasa gerak campuran diklorometana : metanol ( 9,5 : 0,5 . Kadar kofein dihitung dengan menggunakan persamaan regresi y = 2715,112 + 4,389x dan memberikan persentase kadar berturut-turut 1,91 ; 2,04 ; 1,30 ; 1,89 ; 1,29 ; 1,45 ; 1,25 ; 1,42 %. Kadar kofein paling tinggi diberikan oleh kopi robusta yang diberikan pada luwak A. binturong dan diolah secara basah dengan persentase 2,04 %. Sedangkan kadar kofein paling rendah diberikan oleh kopi arabika yang diberikan pada luwak P. hermophroditus dengan persentase 1,25 %. Pengolahan data dengan statistik anova tiga jalan SPSS 21 menunjukkan hasil bahwa jenis kopi, variasi luwak dan cara pengolahan memberikan pengaruh yang signifikan terhadap kadar kofein dengan p < 0,05.

ANALISIS PEMANFAATAN JEJARING SOSIAL UNTUK PENENTUAN KONSENTRASI MAHASISWA DENGAN METODE SOCIAL NETWORK ANALYSIS (Studi Kasus: Universitas Nusantara PGRI Kediri

Directory of Open Access Journals (Sweden)

Risky Aswi R

2015-08-01

Full Text Available Analisis pemanfaatan  jejaring  sosial untuk penentuan konsentrasi mahasiswa dengan metode sosial network analysis. Tujuan dibangun sistem ini untuk menentukan konsentrasi mahasiswa dengan pendekatan Sosial Network Analisis Studi Kasus Jejaring Sosial Facebook dan mampu memanfaatkan facebook sebagai alat untuk menentukan konsentrasi mahasiswa jurusan teknik informatika menjadi tiga bagian yaitu pemrograman, jaringan, dan multimedia. Batasan yang digunakan dalam penelitian ini adalah penelitian ini hanya berlaku pada mahasiswa yang memiliki akun facebook. Penelitian ini menggunakan Social Network Analysis untuk mencari between centrality.Pada tahap pertama setiap akun akan dilihat relasinya setelah itu hubungan antar akun akan dimasukan ke node XL dan akan menghasilkan between centrality. Mahasiswa yang melanjutkan proses selanjutnya adalah mahasiswa yang nilai betweent centralitynya 85% teratas. Setelah itu akan ditambahkan variabel group yang digunakan untuk mengkelompokan peminatan, dan ditambahkan variabel nilai akademis untuk menguatkan pendapat yang diperoleh sebelumnya.Dengan cara melihat between centrality dan menambahkan variabel group untuk membagi siswa sesuai konsentrasi, dan memabahkan variabel nilai akademik untuk memperkuat pendapat. Sosial network analysis terbukti dapat menentukan konsentrasi mahaiswa. Facebook dapat digunakan sebagai alat untuk menentukan konsentrasi mahasiswa, konsentrasi mahasiswa dibagi menjadi pemrograman, jaringan, dan multimedia. Kata Kunci : Jejaring Sosial, Social Network Analysis, between centrality

Information-Based Maintenance Optimization with Focus on Predictive Maintenance (Informatiegebaseerde onderhoudsoptimalisatie met focus op predictief onderhoud)

OpenAIRE

Van Horenbeek, Adriaan

2013-01-01

This dissertation presents an information-based maintenance optimization methodology for physical assets; with focus on, but not limited to, predictive maintenance (PdM). The overall concept of information-based maintenance is that of updating maintenance decisions based on evolving knowledge of operation history and anticipated usage of the machinery, as well as the physics and dynamics of material degradation in critical machinery components. Within this concept, predictive maintenance is a...

Development of plant maintenance systems

International Nuclear Information System (INIS)

Tomita, Jinji; Ike, Masae; Nakayama, Kenji; Kato, Hisatomo

1989-01-01

Toshiba is making active efforts for the continuing improvement of reliability and maintainability of operating nuclear power plants. As a part of these efforts, the company has developed new maintenance administration systems, diagnostic monitoring facilities for plant equipments, computer-aided expert systems, and remote-controlled machines for maintenance work. The maintenance administration systems provide efficient work plans and data acquisition capabilities for the management of personnel and equipments involved in nuclear power plant maintenance. The plant diagnostic facilities monitor and diagnose plant conditions for preventive maintenance, as well as enabling rapid countermeasures to be carried out should they be required. Expert systems utilizing artificial intelligence (AI) technology are also employed. The newly developed remote-controlled machines are useful tools for the maintenance inspection of equipment which can not be easily accessed. (author)

A Planned Preventive Maintenance Program. A Handbook for Chief Business Officers and Supervisors of Maintenance with Suggestions on Maintenance for Consideration by Presidents of Higher Institutions.

Science.gov (United States)

Daniel, Clarence H.

This handbook explains planned preventive maintenance program, which is an operational system of maintenance designed to increase the effectiveness of the maintenance staff and the use of maintenance funds through efficient scheduling of inspections and follow-through of work to be performed. Sections are included for the chief administrative…

Plant Maintenance. The Licensee's Viewpoint

International Nuclear Information System (INIS)

Ungi, T.

1997-01-01

Plant maintenance is a very complex process which requires considerable effort from both within the maintenance process and also many support activities. It is important that the plant maintenance policy is translated into a maintenance programme which will define all relevant aspects of the maintenance. An aspect of this maintenance programme will be a maintenance catalogue which will define the maintenance activities to be carried out and at what frequencies. This paper is aimed at discussing the maintenance philosophy and resulting maintenance catalogues currently adopted in Nuclear Electric Ltd, and in particular at Heysham 2 Power Station. It goes on to consider whether these maintenance catalogues contain the optimum maintenance and if not should they be changed. If change is required, the process by which this change will be brought about is also discussed. (author)

ANALISIS TERHADAP IMPLEMENTASI KEBIJAKAN PENGELOLAAN JALAN DI KABUPATEN BANYUMAS

Directory of Open Access Journals (Sweden)

Sri Hartini

2012-02-01

Full Text Available Basically, the management of roads expected to be able to meet the needs of safe, convenient, and efficient for transportation of goods and services. But in reality, the road management policy in the regional autonomy were still did not meet expectations. Based on the research, the policy of road management in Banyumas are roads construction and road maintenance program. Road construction are conducted to increasing and widening of roads and paving, while road maintenance are done through regular maintenance and periodic maintenance. Factors that influence the policy are legal substance that have not been set as a whole regarding the management of roads, law enforcement which still have its main office in the policyled, facility factor that were not optimal, the society that tend to release responsibility to the government, and permissive factors.

Methodology for maintenance analysis based on hydroelectric power stations reliability; Metodologia para realizar analisis de mantenimiento basado en confiabilidad en centrales hidroelectricas

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Calixto Rodriguez, Roberto; Sandoval Valenzuela, Salvador; Velasco Flores, Rocio; Garcia Lizarraga, Maria del Carmen [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2012-07-01

A methodology to carry out Reliability Centered Maintenance (RCM) studies for hydroelectric power plants is presented. The methodology is an implantation/extension of the guidelines proposed by the Engineering Society for Advanced Mobility Land, Sea and Space in the SAE-JA1012 standard. With the purpose of answering the first five questions, that are set out in that standard, the use of standard ISO14224 is strongly recommended. This approach standardizes failure mechanisms and homogenizes RCM studies with the process of collecting failure and maintenance data. The use of risk matrixes to rank the importance of each failure based on a risk criteria is also proposed. [Spanish] Se presenta una metodologia para realizar estudios de mantenimiento Basado en Confiabilidad (RCM) aplicados a la industria hidroelectrica. La metodologia es una implantacion/ extension realizada por los autores de este trabajo, de los lineamientos propuestos por la Engineering Society for Advanced Mobility Land, Sea and Space en el estandar SAE-JA1012. Para contestar las primeras cinco preguntas del estandar se propone tomar como base los modos y mecanismos de fallas de componentes documentados en la guia para recopilar datos de falla en el estandar ISO-14224. Este enfoque permite estandarizar la descripcion de mecanismos de fallas de los equipos, tanto en el estudio RCM como en el proceso de recopilacion de datos de falla y de mantenimiento, lo que permite retroalimentar el ciclo de mejora continua de los procesos RCM. Tambien se propone el uso de matrices de riesgo para jerarquizar la importancia de los mecanismos de falla con base en el nivel de riesgo.

Component-Based Data-Driven Predictive Maintenance to Reduce Unscheduled Maintenance Events

NARCIS (Netherlands)

Verhagen, W.J.C.; Curran, R.; de Boer, L.W.M.; Chen, C.H.; Trappey, A.C.; Peruzzini, M.; Stjepandić, J.; Wognum, N.

2017-01-01

Costs associated with unscheduled and preventive maintenance can contribute significantly to an airline's expenditure. Reliability analysis can help to identify and plan for maintenance events. Reliability analysis in industry is often limited to statistically based

Remote maintenance for fusion experimental reactor

International Nuclear Information System (INIS)

Koizumi, Koichi; Takeda, Nobukazu

2000-01-01

Here was introduced on maintenance of reactor core portion operated by remote control among maintenance of the International Thermonuclear Experimental Reactor (ITER) begun on its design since 1988 under international cooperation of U.S.A., Europe, Russia and Japan. Every appliances constructing the reactor core portion is necessary to carry out all of their inspection and maintenance by using remote controlled apparatus because of their radiation due to neutron generated by DT combustion of plasma. For engineering design activity (EDA) in ITER, not only design and development of the remote control appliances but also design under consideration of remote maintenance for from structural design of maintained objective appliances to access method to appliances, transportation and preservation method of radiated matters, and out-reactor maintenance in a hot cell, is now under progress. Here were also reported on basic concept on maintenance and conservation of ITER, maintenance design of diverter and blanket with high maintenance frequency and present state on development of maintenance appliances. (G.K.)

ANALISIS PENGARUH VARIABILITAS TANAH PADA VARIABILITAS SPEKTRUM RESPON GEMPABUMI

Directory of Open Access Journals (Sweden)

I Nyoman Sukanta

2010-11-01

Full Text Available Salah satu komplek perkantoran yang terletak di Jalan Thamrin, Jakarta, dipilih sebagai lokasi penelitian. Hasil pemodelan data tanah, menghasilkan 3 lapisan tanah yang berbeda dengan kriteria jenis tanahnya cenderung lunak, dengan nilai N-SPT rata–rata = 11,23. Perhitungan percepatan puncak muka tanah (PGA dan nilai spektrum respon di permukaan tanah menggunakan metoda analisis linier equivalen dengan simulasi Monte Carlo. Program aplikasi SHAKE2000 merupakan alat bantu dalam simulasi, dengan memasukkan beberapa asumsi sebagai data masukan. Data masukan dinamik menggunakan sumber gempabumi Elcentro dan Mexico yang mempunyai kandungan frekuensi berbeda. Asumsi nilai percepatan puncak batuan dasar (PBA untuk kedua sumber gempabumi tersebut sebesar 0,18 g. Hasil analisis menunjukkan nilai spektrum respon dan percepatan puncak muka tanah sangat bervariasi. Gempabumi Elcentro menghasilkan nilai rata–rata PGA = 0,36 g dengan spektrum responnya = 1,0 g  pada Tc = 0,6 detik. Untuk gempabumi Mexico menghasilkan nilai rata–rata PGA = 0,30 g dengan spektrum responnya = 0,9 g pada Tc = 0,6 detik. Artinya, variabilitas jenis tanah sangat berpengaruh tehadap variabilitas spektrum respon di permukaan tanah.   One of the office complex located at Jalan Thamrin, Jakarta, was chosen as the location of the reseach. Results of data modeling soil, produces 3 different soil layers with soil type criteria tend to be soft, with a value of N-SPT  average = 11.23. Calculation of peak ground acceleration (PGA and the value of the response spectrum at ground surface using the method of equivalent linear analysis with Monte Carlo simulation. SHAKE2000 application software  is a tool in the simulation, by including some assumptions as input data. Dynamic input data using Elcentro and Mexican  earthquakes  which have different frequency contents. Assumed value of peak base acceleration (PBA for the two earthquakes was 0.18 g. The result of analysis was the value

LA COMUNICAZIONE POLITICA SUI SOCIAL NETWORK: UN’ANALISI LINGUISTICA

Directory of Open Access Journals (Sweden)

Daniele Spoladore

2014-07-01

Full Text Available Questo lavoro si propone di analizzare le scelte linguistiche dei soggetti politici che utilizzano Facebook e Twitter per rivolgersi al sempre più frammentato panorama dei potenziali elettori. In particolare, analizza le tendenze linguistiche comuni che questi social network hanno fatto emergere nel rapporto tra politica, web e lettori. Cominciando dall’analisi della presenza di parlamentari e senatori su Facebook e Twitter, si cerca di riassumere le principali caratteristiche delle due piattaforme, per giungere ad una classificazione dei testi prodotti attraverso di esse; si analizza la scrittura di post e tweet, sottolineando la presenza di espedienti tipici del mezzo e valutando il loro effetto sui lettori, e si studiano le scelte sintattiche e morfosintattiche in relazione alla struttura e alle possibilità dei due social network. In ultima analisi si osservano le scelte lessicali dei soggetti politici, studiandone i campi semantici e la quantità di tecnicismi. Infine, si cerca di compiere una valutazione delle due differenti tipologie di trasmesso scritto rinvenute nei campioni, osservando come ognuna di esse abbia uno scopo ben preciso nell’economia della comunicazione politica sui social network. Political communication policy in social networks: a language analysis  Daniele Spoladore This paper aims to analyze the linguistic choices of politicians who use Facebook and Twitter to address the increasingly fragmented landscape of potential voters. In particular, it analyzes the common language trends that these social networks have revealed in the relationship between politics, the web and readers. Starting from the analysis of the presence of MPs and senators on Facebook and Twitter, we try to summarize the key features of the two platforms, in order to arrive at a classification of the texts produced using them.  We analyzed posts and tweets, emphasizing the  typical characteristics of these means and evaluating their effect on

Estimating Maintenance Cost for Web Applications

Directory of Open Access Journals (Sweden)

Ion IVAN

2016-01-01

Full Text Available The current paper tackles the issue of determining a method for estimating maintenance costs for web applications. The current state of research in the field of web application maintenance is summarized and leading theories and results are highlighted. The cost of web maintenance is determined by the number of man-hours invested in maintenance tasks. Web maintenance tasks are categorized into content maintenance and technical maintenance. Research is centered on analyzing technical maintenance tasks. The research hypothesis is formulated on the assumption that the number of man-hours invested in maintenance tasks can be assessed based on the web application’s user interaction level, complexity and content update effort. Data regarding the costs of maintenance tasks is collected from 24 maintenance projects implemented by a web development company that tackles a wide area of web applications. Homogeneity and diversity of collected data is submitted for debate by presenting a sample of the data and depicting the overall size and comprehensive nature of the entire dataset. A set of metrics dedicated to estimating maintenance costs in web applications is defined based on conclusions formulated by analyzing the collected data and the theories and practices dominating the current state of research. Metrics are validated with regards to the initial research hypothesis. Research hypothesis are validated and conclusions are formulated on the topic of estimating the maintenance cost of web applications. The limits of the research process which represented the basis for the current paper are enunciated. Future research topics are submitted for debate.

Residual life management. Maintenance improvement

International Nuclear Information System (INIS)

Sainero Garcia, J.; Hevia Ruperez, F.

1995-01-01

The terms Residual Life Management, Life Cycle Management and Long-Term Management are synonymous with a concept which aims to establish efficient maintenance for the profitable and safe operation of a power plant for as long as possible. A Residual Life Management programme comprises a number of stages, of which Maintenance Evaluation focuses on how power plant maintenance practices allow the mitigation and control of component ageing. with this objective in mind, a methodology has been developed for the analysis of potential degradative phenomena acting on critical components in terms of normal power plant maintenance practices. This methodology applied to maintenance evaluation enables the setting out of a maintenance programme based on the Life Management concept, and the programme's subsequent up-dating to allow for new techniques and methods. Initial applications have shown that although, in general terms, power plant maintenance is efficient, the way in which Residual Life Management is approached requires changes in maintenance practices. These changes range from modifications to existing inspection and surveillance methods or the establishment of new ones, to the monitoring of trends or the performance of additional studies, the purpose of which is to provide an accurate evaluation of the condition of the installations and the possibility of life extension. (Author)

Use of the Safety probabilistic analysis for the risk monitor before maintenance; Uso del Analisis probabilistico de seguridad para el monitor de riesgo antes de mantenimiento

Energy Technology Data Exchange (ETDEWEB)

Gonzalez C, M. [Emersis S.A. de C.V., Tabachines 9-bis, 62589 Temixco, Morelos (Mexico)]. e-mail: cuesta@emersis.com

2004-07-01

In this work the use of the Safety Probabilistic Analysis (APS) of the Laguna Verde Power plant to quantify the risk before maintenance is presented. Beginning to describe the nature of the Rule of Maintenance and their risk evaluations, it is planned about the paper of the APS for that purpose, and a systematic form to establish the reaches for this use open of the model is delineated. The work provides some technique details of the implantation methods of the APS like risk monitor, including the form of introducing the systems, trains and components to the user, as well as the fitness to the models and improvements to the used platform. There are covered some of the measures taken to achieve the objectives of preserving the base model approved, to facilitate the periodic realize, and to achieve acceptable times of execution for their efficient use. (Author)

Software evolution and maintenance

CERN Document Server

Tripathy, Priyadarshi

2014-01-01

Software Evolution and Maintenance: A Practitioner's Approach is an accessible textbook for students and professionals, which collates the advances in software development and provides the most current models and techniques in maintenance.Explains two maintenance standards: IEEE/EIA 1219 and ISO/IEC14764Discusses several commercial reverse and domain engineering toolkitsSlides for instructors are available onlineInformation is based on the IEEE SWEBOK (Software Engineering Body of Knowledge)

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E [Teollisuuden Voima Oy, Olkiluoto (Finland)

1999-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

Laboratory equipment maintenance contracts.

Science.gov (United States)

Boudreau, D A; Scheer, W D; Catrou, P G

1985-12-01

The increasing level of technical sophistication and complexity found in clinical laboratory instrumentation today more than ever demands careful attention to maintenance service needs. The time-worn caution for careful definition of requirements for acquisition of a system should also carry over to acquisition of maintenance service. Guidelines are presented for specifications of terms and conditions for maintenance service from the perspective of the laboratorian in the automated clinical laboratory.

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E. [Teollisuuden Voima Oy, Olkiluoto (Finland)

1998-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

Introduzione all'analisi qualitativa dei sistemi dinamici discreti e continui

CERN Document Server

Squassina, Marco

2016-01-01

Il testo è stato concepito per la struttura degli attuali corsi di laurea in Biologia, Matematica, Matematica Applicata, Ingegneria, Scienze Naturali e Mediche. Esso si concentra sugli aspetti qualitativi delle equazioni differenziali come limitatezza o illimitatezza delle soluzioni, esistenza o non esistenza di orbite periodiche, stabilità o instabilità dei punti di equilibrio, biforcazione del sistema al variare di un parametro, robustezza del sistema in presenza di perturbazioni. L'analisi qualitativa di sistemi dinamici discreti e continui è un argomento tecnicamente accessibile anche agli studenti di primo livello e consente di collegare, combinare ed esercitare nozioni che provengono dall'algebra, dal calcolo differenziale di base e dalla geometria elementare, stimolando l'intuizione matematica. Il volume si caratterizza per due aspetti: quello induttivo e quello figurativo. L'approccio induttivo si basa su un'ampia gamma di problemi risolti e pensati per introdurre, gradualmente, sia le conoscenze ...

Analisis Kenyamanan Serta Redesain Pegas Suspensi Mobil Toyota Fortuner 4.0 V6 SR (AT 4x4

Directory of Open Access Journals (Sweden)

Puja Priyambada

2017-01-01

Full Text Available Perkembangan dunia otomotif mengalami kemajuan yang sangat pesat. Seiring dengan perkembangan  tersebut kualitas kenyamanan kendaraan merupakan faktor yang harus diperhatikan. Dalam upaya meningkatkan kualitas kenyamanan kendaraan dilakukan pengembangan dalam sistem suspensi. Hal ini yang mendasari penulis untuk melakukan penelitian terkait suspensi mobil Toyota Fortuner 4.0 V6 SR. Pada penelitian ini, terdapat dua tahap, yakni tahap pengujian dan tahap analisis. Tahap pengujian untuk mendapatkan persentase road holding yang digunakan dalam menentukan kriteria keamanan kendaraan. Pada tahap analisis dilakukan simulasi untuk mengetahui percepatan rms yang dialami penumpang dengan pemodelan Half Car memanjang. Selanjutnya dilakukan perancangan ulang pegas suspensi yang lebih baik dari segi keamanan dan kenyamanan. Dari penelitian ini diketahui bahwa desain dari mobil Toyota Fortuner mengutamakan kenyamanan untuk penggunaan di jalan perkotaan. Berdasarkan standar ISO 2631 menunjukkan bahwa respon suspensi redesain untuk jalan perkotaan menghasilkan kenyamanan yang lebih baik daripada suspensi aktual. Berdasarkan kriteria keamanan BEISSBARTH dari hasil pengujian menunjukkan bahwa suspensi mobil Toyota Fortuner termasuk dalam kategori kurang baik sedangkan hasil simulasi untuk suspensi aktual dan redesain termasuk dalam kategori cukup baik. Dari hasil penelitian didapatkan kekakuan pegas untuk suspensi depan (ksf = 44631,61 N/m dan (ksr = 53500 N/m untuk suspensi belakang.

Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

International Nuclear Information System (INIS)

Spampinato, P.T.; Tabor, M.A.

1988-01-01

Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

Research and development of remote maintenance equipment for ITER divertor maintenance

International Nuclear Information System (INIS)

Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka

2005-02-01

To facilitate easy remote maintainability, the ITER divertor is divided into 60 cassettes, which are transported in the toroidal and radial directions for replacement through maintenance ports located every 90 degrees using the divertor remote maintenance equipment such as in- and ex-vessel transporters. The cassette of 25 tons has to be transported and installed in the vacuum vessel with a positioning accuracy less than 2 mm in the limited space of the vacuum vessel and maintenance port under the intense gamma radiation field. Based on these requirements, the following design and tests were performed. (1) Link mechanism was studied to apply to the transportation of the heavy cassette in the restricted space. A compact mechanism with links for transportation of heavy cassette is designed through the optimization of the link angle taking account of space requirement and force efficiency. As a test result, the lifting capacity of 30 tons (larger than the cassette weight of 25 tons) using two link mechanisms has been demonstrated in the limited space. (2) Compact link mechanism was also studied to apply for locking of the cassette through the optimization of the link angle taking account of space requirement and force efficiency. As a test result, the final positioning accuracy of 0.03 mm for the 25 tons-cassette installation on the vacuum vessel from the initial positioning error of 5 mm has been demonstrated, so that the test result satisfies the requirement less than 2 mm using the link mechanisms in the limited space. (3) Sensor-based control using simple sensors such as optical fiber for divertor maintenance was tested using the full-scale mock-up divertor cassette and remote maintenance equipment. As a result, it is found that the positioning accuracy of 0.16 mm has been achieved by the optical fiber sensor and this value is sufficient for sensor-based control. In addition, the maintenance operation has been carried out through the human-machine interface

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

OpenAIRE

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older tec...

Analisis Spasial Kejadian Filariasi di Kabupaten Demak Jawa Tengah

Directory of Open Access Journals (Sweden)

Nurjazuli Nurjazuli

2018-04-01

Full Text Available Latar Belakang: Filariasis merupakan salah satu penyakit tular vektor yang kurang mendapatkan perhatian, termasuk kelompok Neglected Tropical Diseases (NTDs. Kabupaten Demak merupakan salah satu wilayah di Propinsi Jawa Tengah  yang merupakan daerah endemis filarisis (mf rate>1%. Kejadian filarisis di daerah ini diduga berkaitan dengan kondisi lingkungan fisik dan biologis (nyamuk yang mempunyai peran penting dalam penyebaran penyakit filarisis. Penelitian ini bertujuan untuk menemukan adanya penderita baru,  mengidentifikasi kondisi lingkungan fisik dan biologi yang berkaitan dengan sebaran filarisis di Kabupaten Demak. Matede: Penelitian ini merupakan penelitian observasional dengan rancangan cross-sectional. Sebanyak 30 kasus filariasis dijadikan indek kasus yang selanjutnya dipilih secara purposif sebanyak 140 yang tinggal di sekitar 30 kasus tersebut untuk dilakukan pengamblan darah jari. Observasi lingkungan dilakukan untuk mengidentifikasi kondisi lingkungan (breeding places dan resting places dari yang diduga sebagai nyamuk vektor filariasis. Penangkapan nyamuk dilakukan di sekitar rumah penderita filariasis. Pengukuran koordinat kasus filariais dilakukan dengan pesawat Geographic Positioning System (GPS. Pemeriksaan darah jadi jari dilakukan di Laboratorium Kesehatan Daerah (LABKESDA Propinsi Jawa Tengah. Sedang bedah nyamuk dilakukan di Balai Penelitian Vektor Penyakit Banjarnegara. Analisis data dlakukan secara deskriptif, analisis spasial dilakukan dengan software ArcGis 9.3. Hasil: Penelitian ini tidak menemukan penderita baru filarisis (mf rate=0%. Sebanyak 129 ekor nyamuk telah dilakukan pembedahan dengan hasil semuanya negatip cacing filaria. Hasil identifikasi nyamuk menemukan spesies nyamuk Culex quinquefasciatus merupakan nyamuk yang dominan (72,86% di lokasi penelitian.Terdapat breeding places (40% berupa genangan air terbuka (SPAL dan resting places (83,3% berupa semak-semak di sekitar rumah penderita. Analisis spasial

Dinamiche e persistenza della povertà in Italia: Un’analisi con microdati panel di fonte ECHP

OpenAIRE

Francesco Devicienti; Valentina Gualtieri

2004-01-01

Questo articolo stima le probabilità di entrare e uscire dallo stato di povertà (poverty dynamics) e la sua persistenza in Italia negli anni ‘90, attingendo dalle fonti longitudinali dello European Community Household Panel, 1994-2001. Combinando le stime dei tassi di uscita con quelli di rientro, l’articolo propone una misura di persistenza che tiene conto degli spell ripetuti in povertà. L’analisi preliminare dei dati mostra che per circa il 46% della popolazione il reddito è al di sotto de...

ANALISIS SPASIAL PADA KEJADIAN LUAR BIASA (KLB MALARIA DI DESA PANUSUPAN KECAMATAN REMBANG DAN DESA SIDAREJA KECAMATAN KALIGONDANG KABUPATEN PURBALINGGA

Directory of Open Access Journals (Sweden)

Widiarti Widiarti

2015-01-01

Full Text Available AbstrakMalaria seringkali muncul pada kejadian luar biasa (KLB maupun peningkatan kasus baik di Jawa maupun di luar Jawa. Dilaporkannya peningkatan kasus atau KLB malaria di Kabupaten Purbalingga menimbulkan pemikiran faktor-faktor apa yang mempengaruhi terjadinya KLB malaria. Tujuan penelitian adalah analisis spasial kasus malaria, konfirmasi vektor yang berperan dalam penularan malaria dan bioekologi nyamuk tersangka vektor. Lokasi penelitian di Desa Panusupan Kecamatan Rembang dan Desa Sidareja Kecamatan Kaligondang Kabupaten Purbalingga Jawa Tengah. Konfirmasi vektor dilakukan dengan elisa sporozoit dari semua nyamuk Anopheles sp yang diperoleh. Analisis kasus malaria digunakan metoda GIS dan dilanjutkan uji spatially weighted regression (spatial error model dengan GeoDa. Survei entomologi dilakukan sesuai standart penangkapan nyamuk oleh WHO. Hasil penelitian diperoleh informasi bahwa berdasarkan  elisa  sporozoit,  vektor  yang  berperan  di  Desa  Panusupan  Kecamatan  Rembang  adalah Anopheles maculatus hasil penangkapan hinggap pada manusia diluar rumah pada jam 18.00. Kejadian luar biasa malaria di Kabupaten Purbalingga, semula kasus import namun karena keberadaan vektor (daerah reseptif, sehingga terjadi penularan lokal. Analisis spasial kasus malaria di kedua desa mengelompok dan berdekatan dengan habitat perkembangbiakan An. maculatus yaitu ditepi aliran sungai. Mencermati vektor yang berperan di daerah KLB adalah An. maculatus dengan aktivitas sore sampai malam hari, maka perlu diinformasikan kepada masyarakat agar menjaga tidak kontak dengan nyamuk dan melindungi masyarakat dengan kelambu berinsektisida yang mempunyai daya lindung lama (LLIN sehingga dapat mengurangi terjadinya penularan.Kata Kunci : analisis spasial, KLB, Anopheles maculatus dan malariaAbstractMalaria outbreak or increase cases has came up very often inside or outside of Java Island. The increase malaria cases from Purbalingga Regency is reported

Total Productive Maintenance at Paccar INC

OpenAIRE

Ştefan Farkas

2010-01-01

This paper reports the application of total productive maintenance method at Paccar Inc. truck’s plant in Victoria, Australia. The total productive maintenance method and total productive maintenance house are presented. The global equipment effectiveness is computed and exemplified. The production structure and organising maintenance are presented. Resultas of the variation of global equipment effectiveness and autonomous maintenance in a two weeks period of time are reported.

ANALISIS BASIL SURVEI KEBUTUHAN INFORMASI DI WILAYAH WAMENA KAB. JAYAWIJAYA IRIAN JAYA

Directory of Open Access Journals (Sweden)

Sobari Sobari

2011-12-01

Full Text Available Survei kebutuhan informasi yang telah dilaksanakan di wilayah kabupaten Jayawijaya bertujuan untuk mengetahui subjek-subjek informasi yang dibutuhkan oleh masyarakat setempat serta untuk mengetahui usaha masyarakat dalam memenuhi kebutuhan tersebut. Hasil analisis survei menyimpulkan bahwa kebutuhan informasi masyarakat Jayawijaya lebih dominan pada subjek-subjek informasi bidang teknologi tepat guna, teknologi pedesaan atau teknologi sederhana. Subjek-subjek informasi lain yang juga banyak dibutuhkan adalah masalah sosial budaya, Kesehatan masyarakat, sistem peraturan perundang-undangan, hukum, kepemerintahan, administrasi, manajemen dan masalah perkantoran. Dalam memenuhi kebutuhan informasinya, masyarakat Jayawijaya masih mengandalkan perpustakaan sebagai tempat memperoleh bUkubuku atau bahan bacaan. Kebutuhan buku-buku pelajaran dan buku-buku bacaan anak-anak sekolah di wilayah kabupaten Jayawijaya, khususnya wilayah Wamena masih dirasakan sangat kurang.

Analisis Persepsi Leadership Dan Kewirausahaan Dalam Mencapai Visi Teacherprenuership Dan Entrepreneurship (Studi Kasus Mahasiswa Fakultas Agama Islam Universitas Muhammadiyah Magelang)

OpenAIRE

Oktradiksa, Ahwy

2015-01-01

Penelitian ini bertujuan (1) untuk mengetahui persepsi leadership dalam mencapai visi teacherpreneurship dan entrepreneurship menurut mahasiswa Fakultas Agama Islam.(2) Untuk mengetahui analisis leadership dalam mencapai visi teacherpreneurship dan entrepreneurship di Fakultas Agama Islam. Penelitian ini adalah jenis penelitian lapangan studi kasus. Metode penelitian dengan analitis deskriptif, metode pengambilan sampel yang diambil dengan purposive sampling, teknik p...

Knowledge maintenance in myCBR

OpenAIRE

Aul, Vani; Sauer, Christian; Roth-Berghofer, Thomas

2014-01-01

CBR systems, being knowledge based systems, process knowledge. Due to changes in the environment a CBR system’s knowledge model can become outdated, thus creating a need for constant maintenance of said knowledge model. In this paper, we describe an implementation of (semi-)automatic knowledge maintenance of two of the four knowledge containers of CBR systems, specifically case base maintenance and maintenance of similarity measures within the CBR system development SDK myCBR. We describe our...

ANALISIS KUALITAS KEHIDUPAN KERJA, KINERJA, DAN KEPUASAN KERJA PADA CV DUTA SENENAN JEPARA

Directory of Open Access Journals (Sweden)

Noor Arifin

2012-04-01

Full Text Available Abstract: Analysis of Work Quality, Performance, and Job Satisfaction in CV. Duta Senenan Jepara. This study aims to analyze the effect of the quality work life of employees to their performance, analyze the effect of the quality of work life to the job satisfaction, and analyze the effect of the job satisfaction to employee performance. Variables used in this study are: quality of work Life developed by Wayne Cascio 1992; the performance of employees, developed by Elmuti and Kathawala, 1997; and variables Job Satisfaction, provided by Robbin, 1996 and Wexley et al, 1992. The sample of this study consists of 65 employees. The data Analysis were performed using structural equation modeling with partial least square approach. The result suggests that the quality of work life affects the performance; the satisfaction affects the employee performance; and the quality of working life has no effect on employee satisfaction.   Keywords :  quality of work life, on job satisfaction, employee performance   Abstrak: Analisis Kualitas Kehidupan, Kinerja, dan Kepuasan Kerja pada CV. Duta Senenan Jepara. Penelitian ini bertujuan untuk menganalisis pengaruh kualitas kehidupan kerja terhadap kinerja karyawan, menganalisis pengaruh kualitas kehidupan kerja terhadap kepuasan kerja, dan menganalisis pengaruh kepuasan kerja terhadap kinerja karyawan. Variabel yang digunakan dalam penelitian ini adalah: Kualitas Kehidupan Kerja, dari Cascio Wayne 1992. kemudian kinerja karyawan, dari Elmuti dan Kathawala, 1997, dan Kepuasan Kerja, yang dikembangkan oleh Robbin, 1996 serta Wexley et.al., 1992. Penelitian ini mengambil sampel 65 karyawan dari CV DUTA Senenan Jepara. Teknik analisis yang digunakan adalah Structural Equation Modeling (SEM dengan pendekatan Partial Least Square (PLS. Penelitian ini menyimpulkan bahwa kualitas kehidupan kerja sangat berpengaruh terhadap kinerjanya; kepuasan berpengaruh terhadap kinerja karyawan dan kualitas kehidupan kerja tidak

GRAPHICAL MODELS OF THE AIRCRAFT MAINTENANCE PROCESS

Directory of Open Access Journals (Sweden)

Stanislav Vladimirovich Daletskiy

2017-01-01

Full Text Available The aircraft maintenance is realized by a rapid sequence of maintenance organizational and technical states, its re- search and analysis are carried out by statistical methods. The maintenance process concludes aircraft technical states con- nected with the objective patterns of technical qualities changes of the aircraft as a maintenance object and organizational states which determine the subjective organization and planning process of aircraft using. The objective maintenance pro- cess is realized in Maintenance and Repair System which does not include maintenance organization and planning and is a set of related elements: aircraft, Maintenance and Repair measures, executors and documentation that sets rules of their interaction for maintaining of the aircraft reliability and readiness for flight. The aircraft organizational and technical states are considered, their characteristics and heuristic estimates of connection in knots and arcs of graphs and of aircraft organi- zational states during regular maintenance and at technical state failure are given. It is shown that in real conditions of air- craft maintenance, planned aircraft technical state control and maintenance control through it, is only defined by Mainte- nance and Repair conditions at a given Maintenance and Repair type and form structures, and correspondingly by setting principles of Maintenance and Repair work types to the execution, due to maintenance, by aircraft and all its units mainte- nance and reconstruction strategies. The realization of planned Maintenance and Repair process determines the one of the constant maintenance component. The proposed graphical models allow to reveal quantitative correlations between graph knots to improve maintenance processes by statistical research methods, what reduces manning, timetable and expenses for providing safe civil aviation aircraft maintenance.

Total Productive Maintenance at Paccar INC

Directory of Open Access Journals (Sweden)

Ştefan Farkas

2010-06-01

Full Text Available This paper reports the application of total productive maintenance method at Paccar Inc. truck’s plant in Victoria, Australia. The total productive maintenance method and total productive maintenance house are presented. The global equipment effectiveness is computed and exemplified. The production structure and organising maintenance are presented. Resultas of the variation of global equipment effectiveness and autonomous maintenance in a two weeks period of time are reported.

ANALISIS PENGARUH LDR, NPL DAN ROA TERHADAP CAR PADA BANK PEMBANGUNAN DAERAH (BPD) SE- INDONESIA TAHUN 2007-2011

OpenAIRE

SAM, FATWAL

2012-01-01

2012 Analisis Pengaruh LDR, NPL, dan ROA terhadap CAR Pada Bank Pembangunan Daerah (BPD) Se-Indonesia Tahun 2007-2011 Analysis of Effect of Loan to Deposit Ratio, Non Performing Loan, and Return On Assets to the Capital Adequacy Ratio of the Regional Development Banks In Indonesia Period 2007-2011 Fatwal Sam Cepi Pahlevi Gamalca Penelitian ini bertujuan untuk menganalisis pengaruh variabel LDR, NPL dan ROA terhadap CAR. Data yang digunakan adalah publikasi laporan tahun...

Analisis Kemanfaatan dan Kemudahan Penggunaan Aplikasi Manajemen Surat dengan Pendekatan Technology Acceptance Model pada PT. XYZ Surabaya

Directory of Open Access Journals (Sweden)

Aldioctavia Vicka Paramita

2014-09-01

Full Text Available PT. XYZ Surabaya merupakan salah satu perusahaan besar BUMN di Indonesia. Perusahaan BUMN ini bergerak dibidang aspek kelistrikan yang ada di area Jawa Timur. Dengan karya inovasinya, yaitu pengembangan Aplikasi Manajemen Surat bisnis yang semula dikerjakan secara manual menjadi berbasis web, tentu akan melahirkan sikap penerimaan atau penolakan dari user dalam proses penggunaannya. Sedangkan sebuah sistem informasi yang baik adalah yang dapat diterima oleh user dan dirasa memberikan kemudahan dan manfaat dalam proses penggunannya. Melalui tugas akhir ini akan diterapkan model sukses Fred Davis akan menilai faktor kemanfaatan dan kemudahan user Aplikasi Manajemen Surat  menggunakan metode analisis Partial Least Square untuk mengetahui korelasi tiap variabel dan hipotesis. Tugas akhir ini memverivikasi bahwa persepsi kemudahan penggunaan berpengaruh terhadap persepsi kemanfaatan penggunaan layanan AMS. Variasi pada penggunaan AMS dipengaruhi sebesar 24,5 persen oleh persepsi kemudahan, dan sisanya dipengaruhi oleh variabel lain. Pada persepsi minat sebesar 3,1 persen variasi dipengaruhi oleh persepsi sikap dan kemanfaatan, dan sisanya dipengaruhi oleh variabel lain. Persepsi kemanfaatan dan kemudahan mempengaruhi variasi dari persepsi sikap sebesar 94,5 persen. Sedangkan variasi dari persepsi kenyataan, sebesar 57,3 persen diperngaruhi oleh persepsi minat dan sisanya 43,7 persen dipengaruhi oleh variabel yang lain.Analisis Kemanfaatan dan Kemudahan Penggunaan Aplikasi Manajemen Surat dengan Pendekatan Technology Acceptance Model pada PT. XYZ Surabaya

Depot Maintenance: Executed Workload and Maintenance Operations at DOD Depots

Science.gov (United States)

2017-02-03

in turn enable testing of helicopter rotor blades. The Army has also made investments in logistics software at all of its depots. According to the...maintenance and repair of structural helicopter airframes and blades; advanced composite technologies; flight controls and control surfaces; and...level maintenance on a wide range of vehicles and other military assets, including helicopters , combat vehicles, ships, aircraft, engines, and software

Safety related maintenance in the framework of the reliability centered maintenance concept

International Nuclear Information System (INIS)

1992-07-01

Elevated safety requirements and ever increasing costs of maintenance of nuclear power plants stimulate the interest in different methods and approaches to optimize maintenance activities. Among different concepts, the Reliability Centered Maintenance (RCM) as an approach to improve Preventive Maintenance (PM) programmes is being widely discussed an applied in several IAEA Member States. In order to summarize basic principles and current implementation of the RCM, the IAEA organized a Consultants Meeting in November 1990. The report prepared during that meeting was discussed during the Technical Committee Meeting (TCM) held in May 1991. Numerous technical presentations as well as panel and plenary discussions took place at the TCM. This document contains the report of the Consultants Meeting (modified to include comments of the TCM), a summary of the most important discussions as well as all 14 papers presented at the TCM

Maintenance planning for nuclear power plants

International Nuclear Information System (INIS)

Mattu, R.K.; Cooper, S.E.; Lauderdale, J.R.

2004-01-01

Maintenance planning for nuclear power plants is similar to that in other industrial plants but it is heavily influenced by regulatory rules, with consequent costs of compliance. Steps by the nuclear industry and the Nuclear Regulatory Commission to address that problem include development of guidelines for maintenance of risk-critical equipment, using PRA-based techniques to select a set of equipment that requires maintenance and reliability-centered maintenance (RCM) approaches for determining what maintenance is required. The result of the process is a program designed to ensure effective maintenance of the equipment most critical to plant safety. (author)

Representasi Maskulinitas Dalam Iklan Televisi Pond’s Men #Lelakimasakini (Analisis Semiotika Roland Barthes Terhadap Representasi Maskulinitas

Directory of Open Access Journals (Sweden)

Friska Dewi Yuliyanti

2017-07-01

Full Text Available This research aims to know the meaning of denotation, the connotation and the myth or ideology in television commercials POND'S Men that represent the masculine with #LelakiMasaKini edition. The method used in this research is the Semiotic analysis methods. The Semiotic analysis used in this research is the Semiotic Roland Barthes. The results of this research show that there are; meaning denote, the connotation and the myth or ideology in television commercials POND'S #LelakiMasaKini. The results obtained from the signs of the dominant in the preview scenes that are taken in accordance with the criteria that have been determined. Advertising on Rio Dewanto version described three meaning denotes, three meaning of the connotations and three myths. On the version of the advertisement, Keenan Pearce described three meaning denotes, three the meaning of the connotations and three myths or ideologies and on the version of the Marshall Sastra described three meaning denotes, three the meaning of the connotations and 3 myths or ideologies. Concluded the side or the form of masculinity is promoted of the physical appearance of the type of men who tend to metrosexual, the dream of women, the leader success, lack men who think creatively and have hobbies. Penelitian ini bertujuan untuk mengetahui makna denotasi, konotasi serta mitos atau ideologi dalam iklan televisi POND’S Men yang merepresentasikan maskulinitas dengan edisi #LelakiMasaKini. Metode yang digunakan dalam penelitian ini adalah metode analisis semiotik. Analisis Semiotik yang digunakan dalam penelitian ini adalah analisis semiotik Roland Barthes. Hasil dari penelitian ini menunjukkan bahwa terdapat makna denotasi, konotasi serta mitos atau ideologi pada iklan televisi POND’S Men #LelakiMasaKini. Hasil itu diperoleh dari tanda-tanda dominan pada cuplikan adegan-adegan yang diambil sesuai dengan kriteria yang telah ditentukan. Pada iklan versi Rio Dewanto digambarkan 3 makna denotasi, 3

Application of reliability centred maintenance to optimize operation and maintenance in nuclear power plants

International Nuclear Information System (INIS)

2007-05-01

In order to increase Member States capabilities in utilizing good engineering and management practices the Agency has developed a series of Technical Documents (TECDOCs) to describe best practices and members experience in the application of them. This TECDOC describes the concept of Reliability Centred Maintenance (RCM) which is the term used to describe a systematic approach to the evaluation, design and development of cost effective maintenance programmes for plant and equipment. The concept has been in existence for over 25 years originating in the civil aviation sector. This TECDOC supplements previous IAEA publications on the subject and seeks to reflect members experience in the application of the principles involved. The process focuses on the functionality of the plant and equipment and the critical failure mechanisms that could result in the loss of functionality. When employed effectively the process can result in the elimination of unnecessary maintenance activities and the identification and introduction of measures to address deficiencies in the maintenance programme. Overall the process can result in higher levels of reliability for the plant and equipment at reduced cost and demands on finite maintenance resources. The application of the process requires interaction between the operators and the maintenance practitioners which is often lacking in traditional maintenance programmes. The imposition of this discipline produces the added benefit of improved information flows between the key players in plant and equipment management with the result that maintenance activities and operational practices are better informed. This publication was produced within IAEA programme on nuclear power plants operating performance and life cycle management

A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

OpenAIRE

G. Waeyenbergh; L. Pintelon; L. Gelders

2012-01-01

Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised mainten...

PENERAPAN QFD DAN ANALISIS SWOT UNTUK MENETAPKAN STRATEGI PENINGKATAN KUALITAS PRODUK SAYURAN SEGAR

Directory of Open Access Journals (Sweden)

Enny Purwati Nurlaili

2012-02-01

Full Text Available Makalah ini memaparkan hasil penelitian menentukan strategi untuk meningkatkan kualitas produk sayuran segar dari Perusahaan Agroindustri PT Z.  Strategi perbaikan kualitas dirumuskan berdasar keinginan pelanggan, atribut kunci dan membandingkan evaluasi faktor internal dan eksternal. Keinginan pelanggan dirumuskan dengan metode QFD sedangkan penentuan strategi menggunakan analisa SWOT.. Analisis QFD menunjukkan bahwa kemampuan perusahaan dalam memenuhi keinginan dan harapan pelanggan secara keseluruhan sudah cukup memuaskan konsumen. Sedangkan strategi yang paling tepat digunakan adalah stategi S – O yaitu melakukan peningkatan kualitas produk yang dihasilkan terutama upaya mempertahankan kesegaran dan jaminan kemanan pangan melalui penerapan  HACCP Kata Kunci :        Agroindustry, QFD, Formulasi Strategi,  Sayuran Segar

Interactive videodisc in maintenance

International Nuclear Information System (INIS)

Zwingelstein, G.; Nguyen Van Nghi, B.

1986-01-01

After a recall of the videodisc characteristics, this paper presents its utilization by Electricite de France in the framework of training and maintenance. The SICMA (Interactive Communication System in Maintenance) developed and tested by Electricte de France is presented as also its utilization. It has been tested on the sites of Dampierre and Paluel in the cases of training and maintenance (deconnexion of drive rods of control elements); the conclusions of this experimentation are finally given. 4 refs [fr

Status of fusion maintenance

International Nuclear Information System (INIS)

Fuller, G.M.

1984-01-01

Effective maintenance will be an essential ingredient in determining fusion system productivity. This level of productivity will result only after close attention is paid to the entire system as an entity and appropriate integration of the elements is made. The status of fusion maintenance is reviewed in the context of the entire system. While there are many challenging developmental tasks ahead in fusion maintenance, the required technologies are available in several high-technology industries, including nuclear fission

Condition-based maintenance for complex systems : Coordinating maintenance and logistics planning for the process industries

NARCIS (Netherlands)

Olde Keizer, Minou Catharina Anselma

2016-01-01

Maintenance planning in the process industries is extremely complex for various reasons. Plants often run nonstop, allowing little time for performing preventive maintenance. Failures should be prevented, however, as they can lead to system downtime and high losses of revenue. Corrective maintenance

Environmental analysis of natural gas life cycle; Analisi ambientale del ciclo di vita del gas naturale

Energy Technology Data Exchange (ETDEWEB)

Riva, A.; D' Angelosante, S.; Trebeschi, C. [Snam SpA, Rome (Italy)

2000-12-01

Life Cycle Assessment is a method aimed at identifying the environmental effects connected with a given product, process or activity during its whole life cycle. The evaluation of published studies and the application of the method to electricity production with fossil fuels, by using data from published databases and data collected by the gas industry, demonstrate the importance and difficulties to have reliable and updated data required for a significant life cycle assessment. The results show that the environmental advantages of natural gas over the other fossil fuels in the final use stage increase still further if the whole life cycle of the fuels, from production to final consumption, is taken into account. [Italian] L'analisi del ciclo di vita e' una metodologia che consente di identificare gli effetti ambientali associati ad un prodotto, processo o attivita' lungo il loro ciclo di vita. La valutazione di studi pubblicati e l'applicazione della metodologia alla produzione di energia elettrica da combustibili fossili, utilizzando dati provenienti da banche dati di letteratura e raccolti dall'industria del gas, dimostrano l'importanza e la difficolta' di avere a disposizione dati affidabili ed aggiornati, necessari per un'analisi significativa del ciclo di vita. I risultati mostrano che i vantaggi ambientali del gas naturale rispetto agli altri combustibili fossili nella fase di utilizzo finale, aumentano ulteriormente se si considera l'intero ciclo di vita dei diversi combustibili, dalla produzione al consumo finale.

PREVENTIVE MAINTENANCE. HONEYWELL PLANNING GUIDE.

Science.gov (United States)

Honeywell, Inc., Minneapolis, Minn.

THIS HONEYWELL PAMPHLET DISCUSSES SOME ASPECTS OF PREVENTIVE MAINTENANCE OF AUTOMATIC CONTROLS, HEATING, VENTILATING, AND AIR CONDITIONING, AND COMPARES IN-PLANT WITH CONTRACT SERVICE, CONCLUDING THAT CONTRACT SERVICE IS PREFERABLE AND DESCRIBING A NUMBER OF MAINTENANCE PLANS WHICH THEY FURNISH. PREVENTIVE MAINTENANCE PROVIDES--(1) MORE EFFICIENT…

Pacific Northwest Laboratory Maintenance Implementation plan

International Nuclear Information System (INIS)

Bright, J.D.

1992-06-01

This Maintenance Implementation plan has been developed for Pacific Northwest Laboratory's (PNL) Nuclear Facilities: 306W, 324, 325, 327 and 329NMF. It is based on a graded approach, self-assessment of the existing maintenance program(s) per the requirements specified by US Department of Energy (DOE) Order 4330.4A, Chapter II, Change number-sign 3. The results of this assessment were evaluated to determine needed improvements in PNL Craft Services' current maintenance program. The objective of this implementation plan is to provide baseline information for compliance to the DOE 4330.4A, and for needed improvements. The prime consideration in applying a graded approach to the Order has been to maintain safe and reliable operations, environmental compliance, safeguards and security, programmatic mission, facility preservation, and/or other facility-specific requirements. Using the results of the self-assessment, PNL has selected nine of the 18 elements of the Maintenance Program defined by DOE Order 4330.4A for improvement. The elements selected for improvement are Training and Qualification of Maintenance Personnel; Maintenance Procedures; Planning, Scheduling, and Coordination of Maintenance; Control of Maintenance Activities; Post-Maintenance Testing; Facility Condition Inspection; Management Involvement; Maintenance History; and Additional Maintenance Requirements. Based upon graded approach and current funding, those elements considered most important have been selected as goals for earliest compliance. Commitment dates for these elements have been established for compliance. The remaining elements of noncompliance will be targeted for implementation during later budget periods

Development of blanket remote maintenance system

International Nuclear Information System (INIS)

Kakudate, Satoshi; Nakahira, Masataka; Oka, Kiyoshi; Taguchi, Kou

1998-01-01

ITER in-vessel components such as blankets are scheduled maintenance components, including complete shield blanket replacement for breeding blankets. In-vessel components are activated by 14 MeV neutrons, so blanket maintenance requires remote handling equipment and tools able to handle heavy payloads of about 4 tons within a positioning accuracy of 2 mm under intense gamma radiation. To facilitate remote maintenance, blankets are segmented into 730 modules and rail-mounted vehicle remote maintenance was developed. According to the ITER R and D program, critical technology related to blanket maintenance was developed extensively through joint efforts of the Japan, EU, and U.S. home teams. This paper summarizes current blanket maintenance technology conducted by the Japan Home Team, including development of full-scale remote handling equipment and tools for blanket maintenance. (author)

Development of blanket remote maintenance system

Energy Technology Data Exchange (ETDEWEB)

Kakudate, Satoshi; Nakahira, Masataka; Oka, Kiyoshi; Taguchi, Kou [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-04-01

ITER in-vessel components such as blankets are scheduled maintenance components, including complete shield blanket replacement for breeding blankets. In-vessel components are activated by 14 MeV neutrons, so blanket maintenance requires remote handling equipment and tools able to handle heavy payloads of about 4 tons within a positioning accuracy of 2 mm under intense gamma radiation. To facilitate remote maintenance, blankets are segmented into 730 modules and rail-mounted vehicle remote maintenance was developed. According to the ITER R and D program, critical technology related to blanket maintenance was developed extensively through joint efforts of the Japan, EU, and U.S. home teams. This paper summarizes current blanket maintenance technology conducted by the Japan Home Team, including development of full-scale remote handling equipment and tools for blanket maintenance. (author)

Analisi della relazione tra temperamento, stati psicobiosociali e variabili psicofisiche rispetto ai diversi compiti e strategie metodologiche

OpenAIRE

Montemurro, Francesco Paolo

2012-01-01

L’attività fisica produce effetti benefici a livello mentale (Biddle et al.,2004) e sembra agire sull’emozione modificando attitudini e motivazioni verso la pratica motoria (Digelidis et al., 2003) a partire da sensazioni come il piacere o la noia del fare (Spray et al., 1999). Da questi presupposti il progetto che comprendeva l’analisi di due studi volti a verificare gli effetti dell’attività motoria e sportiva in ambito scolastico, sui comportamenti di adattamento sociale e self efficac...

Mechanical configuration and maintenance

International Nuclear Information System (INIS)

Brown, T.G.; Casini, G.; Churakov, G.F.

1982-01-01

The INTOR engineering design has been strongly influenced by considerations for assembly and maintenance. A maintenance philosophy was established at the outset of the conceptual design to insure that the tokamak configuration would be developed to accommodate maintenance requirements. The main features of the INTOR design are summarized in this paper with primary emphasis on the impact of maintenance considerations. The most apparent configuration design feature is the access provided for torus maintenance. Particular attention was given to the size and location of superconducting magnets and the location of vacuum boundaries. All of the poloidal field (PF) coils are placed outside of the bore of the toroidal field (TF) coils and located above and below an access opening between adjacent TF coils through which torus sectors are removed. A magnet structural configuration consisting of mechanically attached reinforcing members has been designed which facilitates the open access space for torus sector removal. For impurity control, a single null poloidal divertor was selected over a double null design in order to maintain sufficient access for pumping and maintenance of the collector. A double null divertor was found to severely limit access to the torus with the addition of divertor collectors and pumping at the top. For this reason, a single null concept was selected in spite of the more difficult design problems associated with the required asymmetric PF system and higher particle loadings

ANALISIS SISTEM ANTRIAN TRANSPORTASI BUSWAY DI HALTE PULOGADUNG DAN DUKUH ATAS

Directory of Open Access Journals (Sweden)

Umi Marfuah

2015-02-01

Full Text Available Salah satu daerah Jakarta yang memiliki tingkat mobilitas yang cukup sibuk yaitu di daerah Pulogadung yang merupakan kawasan industri dan di daerah Dukuh Atas sekitar Sudirman, yang merupakan kawasan perkantoran di pusat kota. Minat masyarakat akan transportasi busway sebagai sarana transportasi umum dalam kegiatan hari – harinya sangat besar. Hal tersebut menyebabkan meningkatnya jumlah pengguna busway setiap tahunnya, namun Unit Pengelola Transjakarta Busway belum dapat memaksimalkan pelayanan yang dapat diberikan sehingga terjadi penumpukkan penumpang pada halte Pulogadung dan Dukuh Atas, terutama pada hari – hari  kerja di jam sibuk. Penelitian ini didasari pada perbaikan sistem antrian yang ada pada saat ini, sehingga didapatkan solusi untuk mengatasi masalah antrian pada kedua halte tersebut dengan efisien waktu pelayanan sebesar 13%. Model antrian yang digunakan yaitu Single Phase-Single Channel dengan analisis perbaikaanya disimulasikan dengan Promodel.   Kata kunci : Sistem, Antrian, Promodel.

Analisis Vegetasi di Hutan Mbeji Daerah Wonosalam Jombang

Directory of Open Access Journals (Sweden)

Anita Munawwaroh

2016-03-01

Full Text Available Analisis vegetasi terhadap hutan perlu dilakukan untuk mengetahui keanekaragaman hayati yang terdapat di hutan tersebut sehingga mempermudah didalam melakukan pemeliharaan dan pemberdayaan hutan.Tujuan dari penelitian ini adalah untuk mengetahui keanekaragaman hayati dan struktur vegetasi (frekuensi, kerapatan, dominansi, dan Indeks Nilai Penting di hutan mbeji, Wonossalam, Jombang. Pada penelitian ini digunakan metode point centered quarter. Pennelitian dilakukan pada bulan Mei 2015. Hasil penelitian menujukkan padaHutan Mbeji terdapat 11 jenis pohon yang teridentifikasi dan 15 spesies tumbuhan, dimana ada 10 spesies yang telah teridentifikasiNilai penting  tumbuh-tumbuhan di Hutan Mbeji di daerah Wonosalam Jombang  pada tingkat pohon paling tinggi adalah pohon randu (Ceiba petandra  sebesar 57,42 % sedangkan nilai INP paling rendah dari jenis pohon andong (Rhadamnia cinerea yaitu sebesar 6,06 %. Pada sapling nilai penting yang paling tinggi adalah talas (Colocasia esculenta yaitu sebesar 49,23 %. Sedangkan, nilai INP paling rendah dari jenis nanas (Ananas comosus, nangka (Artocarpus heterophyllus, tapak liman (Elephantopus scaber, semak A, semak B, semak C, semak E, dan semak F yaitu sebesar 6,35 %. Tingginya nilai INP menunjukkan bahwa jenis-jenis tersebut dapat menyesuaikan diri dengan lingkungan sekitarnya yang lebih baik dibanding jenis lainnya.

Analisis Cost-Volume-Profit Kaitannya dengan Perencanaan Laba

Directory of Open Access Journals (Sweden)

Rian Andriani

2018-01-01

Full Text Available Tujuan penelitian  ini adalah untuk menganalisis cost, volume, profit Break Event Point dan Margin Of Safety L.A English Course Baleendah Bandung pada kuartal I – IV. Metode penelitian yang digunakan adalah metode penelitian kuntitatif deskriptif. Teknik pengumpulan data menggunakan studi pustaka, observasi, wawancara, dan dokumentasi yang memiliki hubungan dengan pokok permasalahan. Teknik analisis data yang digunakan metode regresi kuadrat terkecil, break event point dan margin of safety.  Hasil menunjukan, biaya tertinggi terdapat pada kuartal I, volume penjualan  tertinggi terdapat pada kuartal I, laba tertinggi terdapat pada kuartal I, Break Event Point tertinggi terdapat pada kuartal I. Sedangkan Margin of safety (% tertinggi pada kuartal IV yaitu 91.9%. Masalah yang timbul dalam  perencanaan  laba yaitu pertama  pendapatan L.A English Course  naik turun  dalam satu  tahunnya, kedua  kurangnya promosi untuk beberapa program kecuali program regular. Upaya dalam mengatasi masalah yang timbul di L.A English Course yaitu pertama memberikan gratis biaya daftar, dan memberi voucher untuk siswa L.A yang memasukan siswa baru., kedua membagikan brosur, dan menawarkan program L.A. dengan melakukan follow up semua nomor telepon tamu yang pernah berkunjung.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XX, CUMMINS DIESEL ENGINE, MAINTENANCE SUMMARY.

Science.gov (United States)

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO PROVIDE A SUMMARY OF THE REASONS AND PROCEDURES FOR DIESEL ENGINE MAINTENANCE. TOPICS ARE WHAT ENGINE BREAK-IN MEANS, ENGINE BREAK-IN, TORQUING BEARINGS (TEMPLATE METHOD), AND THE NEED FOR MAINTENANCE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH PROGRAMED TRAINING FILM "CUMMINS DIESEL ENGINE…

ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI ADOPSI APLIKASI UBER SEBAGAI PENYEDIA JASA TRANSPORTASI DI SURABAYA

Directory of Open Access Journals (Sweden)

Edwin Hendrani

2017-01-01

Full Text Available Seiring berjalannya waktu, Teknologi Informasi dan Komunikasi (TIK di dunia ini semakin berkembang dengan pesat. Permintaan masyarakat akan kebutuhan jasa transportasi semakin tinggi. Kemajuan internet dan canggihnya telepon genggam semakin lama semakin canggih, yang membuat lebih nyaman dan efisiensi untuk memanjakan masyarakat. Dari fenomena tersebut lahirlah Uber. Penelitian ini menggunakan teori Technology Acceptance Model (TAM dengan populasi user Uber Kota Surabaya. Penelitian ini bertujuan untuk mengetahui faktor-faktor yang mempengaruhi adopsi aplikasi Uber sebagai penyedia jasa Transportasi di Surabaya. Hasil yang diperoleh setelah di analisis oleh peneliti adalah kepercayaan pengguna dalam mengadopsi aplikasi Uber yang sangat berpengaruh signifikan terhadap keinginan seseorang untuk menggunakan aplikasi Uber.

ANALISIS MODEL KEPUASAN TERHADAP PEMBELIAN ULANG

Directory of Open Access Journals (Sweden)

Naili Farida

2014-09-01

Full Text Available Tujuan penelitian ini yaitu untuk menguji pengaruh brand equity, nilai pelanggan dan lifestyle yang dimediasi kepuasan konsumen terhadap pembelian ulang produk gadget di Kota Semarang. Responden dalam penelitian ini adalah seluruh konsumen yang telah melakukan pembelian produk gadget merek Samsung, sebanyak 120 orang. Teknik sampling yang digunakan yaitu purposive sampling. Teknik analisis yang digunakan yaitu Partial Least Square (PLS. Hasil penelitian menunjukkan bahwa terdapat pengaruh brand equity terhadap kepuasan, namun dalam konteks lifestyle dan nilai pelanggan tidak ada pengaruh terhadap kepuasan. Sedangkan kepuasan menunjukkan adanya pengaruh terhadap pembelian ulang. Diharapkan dari hasil penelitian ini mampu meningkatkan pembelian ulang melalui brand equity, lifestyle dan nilai pelanggan dalam konteks kepuasan. The objective of the research was to test the influence of brand equity, customer value and lifestyle which were mediated by consumer satisfaction toward re-purchasing of gadget products in Semarang. The respondents of the study were all consumers who have purchased Samsung gadget products. It was a purposive sampling study with 120 respondents. The data were analyzed by Partial Least Square (PLS. The result of the study showed that there was an influence of brand equity toward satisfaction, but in the lifestyle context and customer value did not give any influence toward satisfaction. Whereas; the satisfaction gave influence toward re-purchase. It is expected that this study can increase the repurchasethrough brand equity, lifestyle and customer values in the satisfaction context.

Analisis Penerapan E-Government di Kabupaten Sragen

Directory of Open Access Journals (Sweden)

Yan Andriariza AS

2013-09-01

Full Text Available ABSTRAK Kabupaten Sragen merupakan salah satu pemerintah kabupaten yang menerapkan e-government dengan baik, dan merupakan kabupaten yang menjadi percontohan dalam suksesnya penerapan e-government. Karenanya perlu untuk dilakukan analisis penerapan e-government di Kabupaten Sragen, sebagai contoh bagi daerah lain dalam membangun e-government di daerah tersebut. Analisa yang dilakukan antara lain melihat seberapa jauh penerapan G2C, G2B dan G2G di Pemerintah Kabupaten Sragen. Selain itu juga dilakukan analisa menggunakan The UN Web Measure Index, dan analisa terakhir melakukan analisa deskriptif untuk 5 faktor kesuksesan penerapan e-government, yaitu Hukum dan Peraturan, Struktur Organisasi, Proses Bisnis, Teknologi Informasi dan Visi, Objektif dan Strategi. Dari hasil analisis diperoleh kesimpulan bahwa Kabupaten Sragen telah menerapkan G2B dan G2G, serta berada pada tahap awal penerapan G2C, selain itu Kabupaten Sragen juga telah mencapai pemerintahan yang online, tanpa kertas dan transparan. Implementasi e-government di kabupaten Sragen tersebut dapat dikatakan sukses karena telah memenuhi beberapa faktor dalam mencapai kesuksesan implementasi e-government, yaitu hukum dan peraturan, struktur organisasi, teknologi informasi dan visi, objektif dan strategi. Bila dilihat berdasarkan UN Web Measured Index, Kabupaten Sragen telah mencapai tahap 4. Saran yang dapat diberikan melalui penelitian ini adalah untuk unit kerja yang menangani TIK di Kabupaten Sragen akan lebih baik bila dipegang oleh unit kerja setingkat eselon 2 dan perlunya SOP dan peraturan tambahan terkait TIK di Kabupaten Sragen. ABSTRACT Sragen is one of the districts that implement well e-government, and being a model for the successful implementation of e-government. It is necessary to do the analysis of the application of e-government in Sragen, as an example for other regions in developing e-government in the area. Analysis was carried out to see how far the application of G2C

75 FR 4099 - Maintenance Wage Rate Wage Recommendation and Maintenance Wage Survey; Report of Additional...

Science.gov (United States)

2010-01-26

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5376-N-06] Maintenance Wage Rate Wage Recommendation and Maintenance Wage Survey; Report of Additional Classification and Wage Rate AGENCY: Office of... proposal. The information is used by HUD to determine or adopt prevailing wage rates for maintenance...

75 FR 37457 - Maintenance Wage Rate Wage Recommendation and Maintenance Wage Survey; Report of Additional...

Science.gov (United States)

2010-06-29

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5376-N-54] Maintenance Wage Rate Wage Recommendation and Maintenance Wage Survey; Report of Additional Classification and Wage Rate AGENCY: Office of... proposal. The information is used by HUD to determine or adopt prevailing wage rates for maintenance...

Building Maintenance Management System for Heritage Museum

Directory of Open Access Journals (Sweden)

Md Azree Othuman Mydin

2012-09-01

Full Text Available An investment in the building maintenance aspect is massive throughout the world. In most of the countries, it signifies approximately 50% of the entire revenue of the construction industry. The value of buildings depends on the eminence of the maintenance invested in them. Maintenance management engages obtaining utmost advantage from the investment made on the maintenance activities. At the moment, maintenance in buildings in Malaysia is on the increase in spite of size, category, location, and ownership. This study focuses on Building Maintenance Management System for Heritage Museum, which consists of two case studies in Penang State Museum and Art Gallery, Malaysia and Museum of Perak, Malaysia. The aim of this study is to propose methods to improve the maintenance management system for heritage museum. From the results, the common problem occurs during the implementation for the maintenance of each building is the budget for the maintenance and worker’s skill. The department of each museum must have their own maintenance unit to keep an eye on the maintenance activities for their buildings in order to improve the maintenance management system in their building.

Unsurfaced Road Maintenance Management

Science.gov (United States)

1992-12-01

This draft manual describes an unsurfaced road maintenance management system for use on military installations. This system is available in either a manual or computerized mode (Micro PAVER). The maintenance standards prescribed should protect Govern...

Remote maintenance development for ITER

International Nuclear Information System (INIS)

Tada, Eisuke; Shibanuma, Kiyoshi

1998-01-01

This paper describes the overall ITER remote maintenance design concept developed mainly for in-vessel components such as diverters and blankets, and outlines the ITER R and D program to develop remote handling equipment and radiation hard components. Reactor structures inside the ITER cryostat must be maintained remotely due to DT operation, making remote handling technology basic to reactor design. The overall maintenance scenario and design concepts have been developed, and maintenance design feasibility, including fabrication and testing of full-scale in-vessel remote maintenance handling equipment and tool, is being verified. (author)

Remote maintenance development for ITER

Energy Technology Data Exchange (ETDEWEB)

Tada, Eisuke [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Shibanuma, Kiyoshi

1998-04-01

This paper describes the overall ITER remote maintenance design concept developed mainly for in-vessel components such as diverters and blankets, and outlines the ITER R and D program to develop remote handling equipment and radiation hard components. Reactor structures inside the ITER cryostat must be maintained remotely due to DT operation, making remote handling technology basic to reactor design. The overall maintenance scenario and design concepts have been developed, and maintenance design feasibility, including fabrication and testing of full-scale in-vessel remote maintenance handling equipment and tool, is being verified. (author)

Analisis Persepsi Leadership dan Kewirausahaan dalam Mencapai Visi Teacherprenuership dan Entrepreneurship (Studi Kasus Mahasiswa Fakultas Agama Islam Universitas Muhammadiyah Magelang)

OpenAIRE

Ahwy Oktradiksa

2015-01-01

Penelitian ini bertujuan (1) untuk mengetahui persepsi leadership dalam mencapai visi teacherpreneurship dan entrepreneurship menurut mahasiswa Fakultas Agama Islam.(2) Untuk mengetahui analisis leadership dalam mencapai visi teacherpreneurship dan entrepreneurship di Fakultas Agama Islam. Penelitian ini adalah jenis penelitian lapangan studi kasus. Metode penelitian dengan analitis deskriptif, metode pengambilan sampel yang diambil dengan purposive sampling, teknik pengambilan data dengan me...

Relationship Maintenance on Facebook: Development of a Measure, Relationship to General Maintenance, and Relationship Satisfaction

Science.gov (United States)

Dainton, Marianne

2013-01-01

Previous research indicates that the primary reason college students use Facebook is for relationship maintenance. The present study sought to determine the relationship between Facebook maintenance and general maintenance efforts in college student romantic relationships, as well as the impacts of such behaviors on the relationship. Survey data…

Analisis “Brand Equity” Siaran Berita Stasiun Televisi Swasta Indonesia

Directory of Open Access Journals (Sweden)

Arif Sugiono

2004-12-01

Full Text Available Penelitian ini bertujuan untuk mengetahui keadaan berbagai merek siaran berita stasiun televisi swasta berdasarkan dimensi ekuitas mereknya, dengan memfokuskan pada empat dimensi ekuitas merek, yang meliputi loyalitas merek, kesadaran merek, persepsi kualitas, dan asosiasi merek. Metode yang digunakan metode deskriptif, dengan analisis data menggunakan tabulasi dan teknik skala. Hasil penelitian dari dimensi loyalitas merek tiga besar siaran berita secara berurutan adalah Buser, Patroli dan Liputan 6 Petang. Dari dimensi Kesadaran Merek tiga siaran berita yang disebut adalah Buser, Patroli dan Liputan 6 Petang. Dari segi asosiasi merek, Buletin Siang dan Liputan 6 Siang (44%, diasosiasikan sebagai siaran berita yang penyajiannya cepat. Patroli (62% diasosiasikan siaran berita yang penyajiannya akurat (benar dan obyektif Info Manca Negara (56% diasosiasikan sebagai siaran berita yang penyajiannya cukup menarik. Dari dimensi persepsi kualitas yang dijadikan pedoman adalah, kecepatan berita 31%, keakuratan aberita 36%, penyajian berita 33%, dengan urutan merek siaran berita Liputan 6 Siang, Buser, dan Patroli.

Maintenance of nuclear power plants

International Nuclear Information System (INIS)

Migaud, D.; Hutin, J.P.; Jouette, I.; Eymond, P.; Devie, P.; Cudelou, C.; Magnier, S.; Frydman, M.

2016-01-01

This document gathers different articles concerning the maintenance of the French nuclear power plants. The first article analyses the impact of the recent law on the energetic transition that sets the share of nuclear power at 50% of the electricity produced by 2025. A consequence may be the decommissioning of 17 to 20 reactors by 2025 and the huge maintenance program called 'Grand Carenage' whose aim is to extend operating life over 40 years will have to be re-considered in order to avoid useless expenses. The second article shows that in 2015 the French nuclear reactor fleet got very good results in terms of availability and safety. There were 49 scheduled outages and among them some ended ahead of time. The third article describes the specificities of the maintenance of a nuclear power plant, for instance the redundancy of some systems implies that maintenance has to deal with systems that have never functioned but must be ready to operate at any moment. Another specificity is the complexity of a nuclear power plant that implies an essential phase of preparation for maintenance operations. Because of safety requirements any maintenance operation has to be controlled, checked and may provide feedback. The fourth article presents the 'Grand Carenage' maintenance program that involves the following operations: the replacement of steam generators, the re-tubing of condensers, the replacement of the filtering drums used for cooling water, the testing of the reactor building, the hydraulic test of the primary circuit and the inspection of the reactor vessel. The fifth article focuses on the organization of the work-site for maintenance operations and the example of the Belleville-sur-Loire is described in the sixth article. Important maintenance operations like 'Grand Carenage' requires a strong collaboration with a network of specialized enterprises and as no reactor (except Flamanville EPR) is being built in France, maintenance

Maintenance manual. Vol. 1. Maintenance management; 2. completely rev. ed.; Handbuch Instandhaltung. Bd. 1. Instandhaltungsmanagement

Energy Technology Data Exchange (ETDEWEB)

Warnecke, H.J. [ed.] [Fraunhofer-Institut fuer Produktionstechnik und Automatisierung (IPA), Stuttgart (Germany)

1992-12-31

This manual is the second, completely revised edition of the standard manual ``Maintenance - Fundamentals``, which was first published in 1981. It presents an outline of all relevant fields of maintenance today and contains practical information on new and established methods of maintenance management and technology. With its comprehensive concept, which addresses any industrial enterprise that wants to remain competitive, the manual is indispensable for maintenance managers in industry, service enterprises and consultancies. Vol.1, ``Maintenance Management``, informs the reader on fundamentals, design with a view to maintenance, organisation of maintenance work, personnel management, industrial safety and economic aspects of maintenance. Current issues such as product liability, electronic data processing, expert systems, environmental protection, controlling based on characteristic data, etc. are gone into. Graphical representations, concrete procedural information and exemplary solutions may be used directly as working tools for the practice of maintenance. (orig.) [Deutsch] Das vorliegende Handbuch ist die zweite, voellig ueberarbeitete und erweiterte Auflage des Standardwerkes ``Instandhaltung - Grundlagen``, das 1981 erstmals erschien. Es gibt einen Ueberblick ueber alle relevanten Gebiete einer modernen Instandhaltung und vermittelt praxisnahes Wissen ueber neue und bewaehrte Methoden und Verfahren des Instandhaltungsmanagements und der Instandhaltungstechnik. Mit dieser umfassenden Konzeption, die auf die Belange des im Wettbewerb stehenden Industriebetriebes ausgerichtet ist, wendet sich das Handbuch an die Fuehrungskraefte der Instandhaltung in der Industrie sowie an Dienstleistungs- und Beratungsunternehmen. Im Band 1 ``Instandhaltungsmanagement`` kann sich der Leser ueber Grundlagen, instandhaltungsgerechtes Konstruieren, Organisation der Instandhaltung, Personalmanagement, Arbeitssicherheit sowie Wirtschaftlichkeit der Instandhaltung informieren

Winter maintenance performance measure.

Science.gov (United States)

2016-01-01

The Winter Performance Index is a method of quantifying winter storm events and the DOTs response to them. : It is a valuable tool for evaluating the States maintenance practices, performing post-storm analysis, training : maintenance personnel...

Analisis Framing Pemberitaan Kisruh Partai Golkar Pasca Keputusan Menkumham Dalam Program Dialog Primetime News Metro TV Dan Kabar Petang TVOne

Directory of Open Access Journals (Sweden)

Etika Widya Kusumadewi

2016-12-01

Full Text Available In the span of 2014 to 2015, the Golkar Party experienced a tumultuous duality of leadership between Aburizal Bakrie and Agung Laksono version. The Government through the Ministry of Justice and Human Rights issued a decree stating Golkar Party Agung Laksono version is a legitimate stewardship. Two national television news station, Metro TV and TVOne, which are both owned by political party leaders, also 'warm' to the conflict on both sides. This study aims to understand, analyze, describe and compare dialog program Primetime News Metro and Evening News TVOne in framing news Golkar chaotic post-issuance of a decree by the Minister of Justice and Human Rights. Data analysis techniques used in this research is the analysis method with the paradigm framing or constructionist approach. This study uses a model framing analytical approach by using categorization Murray Edelman. From the results of research show can be quite impartial Metro while TVOne are beyond reasonable limits. Both seemed to favor and do not promote objectivity. Media ownership is considered to impact content that do both. Pada rentang waktu 2014 hingga 2015 Partai Golkar mengalami kisruh dualisme kepemimpinan yakni Golkar Aburizal Bakrie versi Munas Bali dan Golkar Agung Laksono versi Munas Jakarta. Menkumham kemudian mengeluarkan SK yang semakin membuat panas tubuh partai. Dua media televisi nasional, Metro TV dan TVOne, yang keduanya dimiliki oleh pimpinan partai politik, turut ‘menghangatkan’ konflik kedua kubu. Penelitian ini bertujuan untuk memahami, menganalisis, mendeskripsikan serta menbandingkan program dialog Primetime News Metro TV dan Kabar Petang TVOne dalam membingkai pemberitaan kisruh partai Golkar pasca dikeluarkannya SK Menkumham yang isinya menyatakan Golkar Agung Laksono adalah kepengurusan yang sah. Teknik analisis data yang digunakan dalam penelitian ini adalah metode analisis framing dengan paradigma atau pendekatan konstruksionis. Penelitian ini

Space Telescope maintenance and refurbishment

Science.gov (United States)

Trucks, H. F.

1983-01-01

The Space Telescope (ST) represents a new concept regarding spaceborne astronomical observatories. Maintenance crews will be brought to the orbital worksite to make repairs and replace scientific instruments. For major overhauls the telescope can be temporarily returned to earth with the aid of the Shuttle. It will, thus, be possible to conduct astronomical studies with the ST for two decades or more. The five first-generation scientific instruments used with the ST include a wide field/planetary camera, a faint object camera, a faint object spectrograph, a high resolution spectrograph, and a high speed photometer. Attention is given to the optical telescope assembly, the support systems module, aspects of mission and science operations, unscheduled maintenance, contingency orbital maintenance, planned on-orbit maintenance, ground maintenance, ground refurbishment, and ground logistics.

ANALISIS PARTISIPASI MASYARAKAT DALAM PEMBANGUNAN FISIK (STUDI KASUS DI DESA PUNGUT HILIR, KECAMATAN AIR HANGAT TIMUR, KABUPATEN KERINCI

Directory of Open Access Journals (Sweden)

vivi herlina

2017-10-01

Full Text Available Peran masyarakat untuk memujudkan pembangunan fisik sangat penting sekali. Penelitian ini menggunakan metode purposive sampling. Hasil penelitian ini menunjukkan bahwa masyarakat Desa Pungut Hilir, Kecamatan Air Hangat Timur, Kabupaten Kerinci telah diikutsertakan dalam proses pembangunan desa. Namun, terdapat beberapa warga yang tidak ingin ikut terlibat dalam proses pembangunan tersebut. Umumnya masyarakat telah dilibatkan dalam kegiatan pertemuan desa. Terdapat lima indikator analisis partisipasi yang digunakan, yaitu indikator prakarsa/inisiatif, pembiayaan, pengambilan keputusan, mobilisasi tenaga, dan pelaksanaan pembangunan.

ANALISIS SEBARAN RADIONUKLIDA PADA KONDISI NORMAL UNTUK REAKTOR AEC 1000 MW

Directory of Open Access Journals (Sweden)

Sri Kuntjoro

2015-03-01

Full Text Available Telah dilakukan analisis sebaran radionuklida pada reaktor daya Atomic Energy Agency (AEC 3568 MWTh, setara dengan 1000 Mwe untuk kondisi operasi normal. Analisis dilakukan untuk dua reaktor yang terpisah sejauh 500 m dan sudut 90o satu dengan yang lain. Langkah awal dalam melakukan analisis adalah menentukan suku sumber reaktor menggunakan program komputer ORIGEN2 dan EMERALD NORMAL. ORIGEN2 digunakan untuk menentukan inventori radionuklida yang terdapat di reaktor. Selanjutnya dengan dengan menggunakan program EMERALD NORMAL dihitung suku sumber yang sampai ke cerobong reaktor. Untuk menganalisis dosis yang diterima penduduk dilakukan dengan menggunakan program PC-CREAM. Perhitungan dilakukan untuk satu dan dua PLTN di calon tapak PLTN. Hasil yang diperoleh adalah sebaran radionuklida terbesar untuk satu PLTN pada jarak 1 km dan kearah zona 9 (191,25o dan untuk dua PLTN pada jarak 1 km dan kearah zona 10 (213,75o. Radionuklida yang sampai ke penduduk melalui dua alur yaitu alur makanan dan hirupan. Untuk alur makanan berasal dari radionuklida I-131, dan terbesar melalui alur produk susu sebesar 53,40 % untuk satu maupun dua PLTN . Untuk alur hirupan ranionuklida pemberi kontribusi paparan terbesar berasal dari Kr-85m sebesar 53,80 %. Dosis total terbesar yang diterima penduduk terdapat pada jarak 1 Km untuk bayi yaitu sebesar 4,10 μSi dan 11,26 μSi untuk satu dan dua PLTN. Hasil ini sangat kecil dibandingkan dengan batas dosis yang diijinkan oleh badan pengawas (BAPETEN untuk penduduk yaitu sebesar 1 mSi. Kata Kunci : Reaktor daya, komputer code, radionuklida, alur makanan, hirupan   Analysis for radionuclide dispersion for the Atomic Energy Agency (AEC 3568 MWth Power Reactor, equal to the 1000 MWe at normal condition has been done. Analysis was done for two piles that is separated by 500 m distance and angle of 90o one to other. Initial pace in doing the analysis is to determine reactors source term using ORIGEN2 and EMERALD NORMAL

Development of divertor remote maintenance system

Energy Technology Data Exchange (ETDEWEB)

Takeda, Nobukazu; Oka, Kiyoshi; Akou, Kentaro; Takiguchi, Yuji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-04-01

The ITER divertor is categorized as a scheduled maintenance component because of extreme heat and particle loads it is exposed to by plasma. It is also highly activated by 14 MeV neutrons. Reliable remote handling equipment and tools are required for divertor maintenance under intense gamma radiation. To facilitate remote maintenance, the divertor is segmented into 60 cassettes, and each cassette weighing about 25 tons and maintained and replaced through four maintenance ports each 90 degrees. Divertor cassettes must be transported toroidally and radially for replacement through maintenance ports. Remote handling involving cassette movers and carriers for toroidal and radial transport has been developed. Under the ITER R and D program, technology critical to divertor cassette maintenance is being developed jointly by Japan, E.U., and U.S. home teams. This paper summarizes divertor remote maintenance design and the status of technology development by the Japan Home Team. (author)

Development of divertor remote maintenance system

International Nuclear Information System (INIS)

Takeda, Nobukazu; Oka, Kiyoshi; Akou, Kentaro; Takiguchi, Yuji

1998-01-01

The ITER divertor is categorized as a scheduled maintenance component because of extreme heat and particle loads it is exposed to by plasma. It is also highly activated by 14 MeV neutrons. Reliable remote handling equipment and tools are required for divertor maintenance under intense gamma radiation. To facilitate remote maintenance, the divertor is segmented into 60 cassettes, and each cassette weighing about 25 tons and maintained and replaced through four maintenance ports each 90 degrees. Divertor cassettes must be transported toroidally and radially for replacement through maintenance ports. Remote handling involving cassette movers and carriers for toroidal and radial transport has been developed. Under the ITER R and D program, technology critical to divertor cassette maintenance is being developed jointly by Japan, E.U., and U.S. home teams. This paper summarizes divertor remote maintenance design and the status of technology development by the Japan Home Team. (author)

Optimizing preventive maintenance

International Nuclear Information System (INIS)

DiCola, F.E.

1988-01-01

The traditional approach to preventive maintenance (PM) is based on adherence to manufacturers's requirements and recommended frequencies. When equipment fails, either new procedures are established or the frequency is increased. This leads to an increase in the number of PM activities, overloading not only maintenance resources, but support as well. There is no correlation between more PM and an increase in equipment reliability. More PM may actually induce failures. Reliability-centered maintenance, a new concept in utility maintenance, is based on identifying system/subsystem functions, failures, and dominant failure modes to develop or revise PM tasks. The activities described in this paper are based on actual implementation of this concept on an ongoing project to upgrade the PM program at one of the largest electric utilities in the country. Optimum PM activities are those that, when implemented, will minimize factors that c cause equipment to fail. One technique described illustrates how equipment performance, failure modes, and causes can be related to minimize the occurrence of failures. Operating history and service life of a component are key factors in determining the most effective PM activities, provided that the factors are related to failure modes and causes

Maintenance for life management

International Nuclear Information System (INIS)

Hevia, F.

1997-01-01

Life Management is based on the detection, monitoring and control of long-term degradation that affects individual plant components and important populations. Experience has shown that in many cases current maintenance practices do not attend to ageing directly; instead they deal with the consequences when it is already too late, when good Life Management is no longer practical. This has brought about the need for specific Maintenance Evaluation and Improvement Programmes to adjust to the basic objective of Life Management which is to project against, monitor and mitigate ageing that can affect the safe and profitable operating life of the facility. New regulatory requirements for ageing monitoring and effective maintenance to ensure safety (Maintenance Rule) have made it even more necessary to implement the Maintenance Evaluation Programme to cope with ageing, and to integrate that tasks in both programmes to optimise effort and use of tools. This paper presents a brief description of the objectives and methodologies of these Programmes which has been applied to plants around the world and in Spain at the Garona and Vandellos II plants in Spain as part of the PIE project for developing a Remanent Life Evaluation System for nuclear power plants. (Author)

Efektivitas dan Kendala Pembelajaran Sains Berbasis Inkuiri terhadap Capaian Dimensi Kognitif Siswa: Meta Analisis

Directory of Open Access Journals (Sweden)

Abdurrahman Abdurrahman

2017-06-01

teknologi informasi. Pembelajaran berbasis inkuiri sering disusun dalam fase penyelidikan yang berfokus untuk membangun kemampuan sains bagi para siswa. Namun, variasi yang berbeda mengenai makna kompetensi penyelidikan sering kita temukan di berbagai literatur. Artikel ini berfokus untuk mengidentifikasi dan meringkas fitur inti dari pembelajaran berbasis inkuiri melalui metode meta analisis, mengkaji literatur secara sistematis dan mengembangkan proses penyelidikan yang disintesis dengan menggabungkan kekuatan kerangka kerja pembelajaran berbasis inkuiri yang ada untuk meningkatkan prestasi belajar siswa. Kajian ini dilakukan dengan menggunakan basis data dari Web of Science dan ERIC (Education Resources Information Center; Sebanyak 15 artikel yang menjelaskan tahap penyelidikan atau keseluruhan proses penyelidikan dipilih berdasarkan kriteria pencarian yang spesifik. Analisis terhadap artikel menghasilkan identifikasi lima fase penyelidikan umum yang dapat berbeda secara istilah satu sama lainnya yaitu: Orientasi, Konseptualisasi, Investigasi, Diskusi dan Kesimpulan. Disamping itu, hampir seluruh pembelajaran berbasis inkuiri biasanya berakhir dengan fase Kesimpulan. Berdasarkan analisis di seluruh hasil penelitian menunjukkan bahwa pembelajaran berbasis inkuiri telah berhasil menunjukkan peningkatan penguasaan aspek kognitif siswa secara signifikan.

Maintenance training centre at NPP Paks, Hungary

International Nuclear Information System (INIS)

Babos, K.

1996-01-01

The lecture shows the feature of WWER-440/213 units maintenance, the existing maintenance training system, the necessity of the change in maintenance training system at NPP Paks. The author introduces the would-be maintenance training centre, the training facilities and the main tasks related to the maintenance training. (author)

Maintenance Support System Development for Maintenance Personnel in Nuclear Power Plants

International Nuclear Information System (INIS)

Yim, Ho Bin; Kim, In; Lee, Seung Min; Seong, Poong Hyun

2009-01-01

As plants or factories get old, the number of maintenance activities increases, and so does the necessity of maintenance itself. Industries have adopted the latest technologies such as RFID, wireless sensor networking, and augmented reality to develop systems which increase human performances as well as productivity. Due to safety related concerns, nuclear power industries have been reluctant to use these fancy technologies. However, from the economics point of view, it is necessary to take advantages of novel technologies. This empirical study considers not only ergonomics view, but also the economics view when building maintenance support systems. This paper introduces brief features of five subsystems which were built to reduce human errors and advantages when each system successfully reduces those human errors

Maintenance Support System Development for Maintenance Personnel in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Yim, Ho Bin; Kim, In; Lee, Seung Min; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2009-05-15

As plants or factories get old, the number of maintenance activities increases, and so does the necessity of maintenance itself. Industries have adopted the latest technologies such as RFID, wireless sensor networking, and augmented reality to develop systems which increase human performances as well as productivity. Due to safety related concerns, nuclear power industries have been reluctant to use these fancy technologies. However, from the economics point of view, it is necessary to take advantages of novel technologies. This empirical study considers not only ergonomics view, but also the economics view when building maintenance support systems. This paper introduces brief features of five subsystems which were built to reduce human errors and advantages when each system successfully reduces those human errors.

Space station orbit maintenance

Science.gov (United States)

Kaplan, D. I.; Jones, R. M.

1983-01-01

The orbit maintenance problem is examined for two low-earth-orbiting space station concepts - the large, manned Space Operations Center (SOC) and the smaller, unmanned Science and Applications Space Platform (SASP). Atmospheric drag forces are calculated, and circular orbit altitudes are selected to assure a 90 day decay period in the event of catastrophic propulsion system failure. Several thrusting strategies for orbit maintenance are discussed. Various chemical and electric propulsion systems for orbit maintenance are compared on the basis of propellant resupply requirements, power requirements, Shuttle launch costs, and technology readiness.

Nuclear power plants maintenance

International Nuclear Information System (INIS)

Anon.

1988-01-01

Nuclear power plants maintenance now appears as an important factor contributing to the competitivity of nuclea energy. The articles published in this issue describe the way maintenance has been organized in France and how it led to an actual industrial activity developing and providing products and services. An information note about Georges Besse uranium enrichment plant (Eurodif) recalls that maintenance has become a main data not only for power plants but for all nuclear industry installations. (The second part of this dossier will be published in the next issue: vol. 1 January-February 1989) [fr

A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

Directory of Open Access Journals (Sweden)

G. Waeyenbergh

2012-01-01

Full Text Available Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised maintenance concept. After describing the general framework and its decision support use, some case experiences are given. This experience covers some elements of the proposed framework.

Remote maintenance development for ITER

International Nuclear Information System (INIS)

Tada, Eisuke; Shibanuma, Kiyoshi

1997-01-01

This paper both describes the overall design concept of the ITER remote maintenance system, which has been developed mainly for use with in-vessel components such as divertor and blanket, and outlines of the ITER R and D program, which has been established to develop remote handling equipment/tools and radiation hard components. In ITER, the reactor structures inside cryostat have to be maintained remotely because of activation due to DT operation. Therefore, remote-handling technology is fundamental, and the reactor-structure design must be made consistent with remote maintainability. The overall maintenance scenario and design concepts of the required remote handling equipment/tools have been developed according to their maintenance classification. Technologies are also being developed to verify the feasibility of the maintenance design and include fabrication and testing of a fullscale remote-handling equipment/tools for in-vessel maintenance. (author)

Lean thinking for a maintenance process

Directory of Open Access Journals (Sweden)

Sherif Mostafa

2015-01-01

Full Text Available The maintenance process shares significant operating costs in an organisation. Lean thinking can be incorporated into maintenance activities through applying its principles and practices/tools. Lean maintenance (LM is a prerequisite for lean manufacturing systems. This research proposes a new structure for LM process based on a systematic literature review of a significant number of related articles that were published on LM. The process structure is designed based on the five lean principles to guide and support organisations to pursue maintenance excellence. This study establishes a scheme for LM tools that are structured into 2 level 4 bundles and 26 lean practices/tools and develops a House of Waste (HoW to demonstrate the association between maintenance wastes and the LM tools. With a successful accomplishment of the proposed scheme, the performance of a maintenance department can create more improvement opportunities over time to reach the maintenance excellence status.

IDENTIFIKASI TEKNIK-TEKNIK PENGUBAHAN TINGKAH LAKU DALAM PENERAPAN PEMIKIRAN IBNU QOYYIM AL-JAUZIYYAH UNTUK PENGENTASAN KORBAN SEKS BEBAS DAN HOMOSEKS (KAJIAN ANALISIS HERMENEUTIKA BERSUSUN

Directory of Open Access Journals (Sweden)

Aswar Aswar

2016-02-01

Full Text Available The purposes of this research were to obtain (1 Descriptive-interpretative information  related to the intervention targets of behavior modification, (2 Descriptive-interpretative information  related with the analysis and diagnosis, and (3 Descriptive-interpretative understanding on each form of treatment that can be used as a technique of behavior modification for freesex and homosexual. Data were collected through a text document of Ibnu Qoyyim al-Jauziyyah thought, observation and interview with research subjects in the field. The study used a qualitative approach with multilevel hermeneutic analysis. Results of the study were: (1 Intervention target of modification behavior focusing on thought/belief modification; (2 analysis and diagnosis around the unhealthy thoughts/beliefs and habit/action; (3 it was founded treatment form to alleviate freesex victim and homosexual in the form of mind intervention techniques, lust disorder alleviation techniques, homosexual alleviation techniques, and worship as an alleviation techniques. Tujuan penelitian ini untuk memperoleh (1 keterangan deskriptif-interpretif terkait sasaran intervensi pengubahan tingkah laku, (2 keterangan deskriptif-interpretif terkait analisis dan diagnosis, dan (3 pemahaman deskriptif-interpretif pada tiap bentuk perlakuan yang dapat dijadikan sebagai teknik pengubahan tingkah laku seks bebas dan homoseks. Data dikumpulkan melalui dokumen teks pemikiran Ibnu Qoyyim al-Jauziyyah, observasi dan interviu subjek terteliti lapangan. Penelitian menggunakan pendekatan kualitatif dengan analisis hermeneutika bersusun. Hasil penelitian adalah (1 sasaran intervensi pengubahan tingkah laku berfokus di pengubahan pikiran/keyakinan; (2 analisis dan diagnosis berkisar pada pikiran/keyakinan dan kebiasaan/perbuatan yang tidak sehat; (3 ditemukan bentuk perlakuan dalam pengentasan korban seks bebas dan homoseks berupa teknik intervensi pikiran, teknik pengentasan gangguan syahwat, teknik

Developing optimized prioritizing road maintenance

Directory of Open Access Journals (Sweden)

Ewadh Hussein Ali

2018-01-01

Full Text Available Increased demand for efficient maintenance of the existing roadway system needs optimal usage of the allocated funds. The paper demonstrates optimized methods for prioritizing maintenance implementation projects. A selected zone of roadway system in Kerbala city represents the study area to demonstrate the application of the developed prioritization process. Paver system PAVER integrated with GIS is used to estimate and display the pavement condition index PCI, thereby to establish a priority of maintenance. In addition to simple ranking method by PCI produced by the output of PAVER, the paper introduces PCI measure for each section of roadway. The paper introduces ranking by multiple measures investigated through expert knowledge about measures that affect prioritization and their irrespective weights due to a predesigned questionnaire. The maintenance priority index (MPI is related to cost of suitable proposed maintenance, easiness of proposed maintenance, average daily traffic and functional classification of the roadway in addition to PCI. Further, incremental benefit-cost analysis ranking provide an optimized process due to benefit and cost of maintenance. The paper introduces efficient display of layout and ranking for the selected zone of roadway system based on MPI index and incremental BCR method. Although the two developed methods introduce different layout display for priority, statistical test shows that no significant difference between ranking of all methods of prioritization.

340 Facility maintenance implementation plan

International Nuclear Information System (INIS)

1995-03-01

This Maintenance Implementation Plan (MIP) has been developed for maintenance functions associated with the 340 Facility. This plan is developed from the guidelines presented by Department of Energy (DOE) Order 4330.4B, Maintenance Management Program (DOE 1994), Chapter II. The objective of this plan is to provide baseline information for establishing and identifying Westinghouse Hanford Company (WHC) conformance programs and policies applicable to implementation of DOE order 4330.4B guidelines. In addition, this maintenance plan identifies the actions necessary to develop a cost-effective and efficient maintenance program at the 340 Facility. Primary responsibility for the performance and oversight of maintenance activities at the 340 Facility resides with Westinghouse Hanford Company (WHC). Maintenance at the 340 Facility is performed by ICF-Kaiser Hanford (ICF-KH) South Programmatic Services crafts persons. This 340 Facility MIP provides interface requirements and responsibilities as they apply specifically to the 340 Facility. This document provides an implementation schedule which has been developed for items considered to be deficient or in need of improvement. The discussion sections, as applied to implementation at the 340 Facility, have been developed from a review of programs and practices utilizing the graded approach. Biennial review and additional reviews are conducted as significant programmatic and mission changes are made. This document is revised as necessary to maintain compliance with DOE requirements

340 Facility maintenance implementation plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This Maintenance Implementation Plan (MIP) has been developed for maintenance functions associated with the 340 Facility. This plan is developed from the guidelines presented by Department of Energy (DOE) Order 4330.4B, Maintenance Management Program (DOE 1994), Chapter II. The objective of this plan is to provide baseline information for establishing and identifying Westinghouse Hanford Company (WHC) conformance programs and policies applicable to implementation of DOE order 4330.4B guidelines. In addition, this maintenance plan identifies the actions necessary to develop a cost-effective and efficient maintenance program at the 340 Facility. Primary responsibility for the performance and oversight of maintenance activities at the 340 Facility resides with Westinghouse Hanford Company (WHC). Maintenance at the 340 Facility is performed by ICF-Kaiser Hanford (ICF-KH) South Programmatic Services crafts persons. This 340 Facility MIP provides interface requirements and responsibilities as they apply specifically to the 340 Facility. This document provides an implementation schedule which has been developed for items considered to be deficient or in need of improvement. The discussion sections, as applied to implementation at the 340 Facility, have been developed from a review of programs and practices utilizing the graded approach. Biennial review and additional reviews are conducted as significant programmatic and mission changes are made. This document is revised as necessary to maintain compliance with DOE requirements.

Maintenance for the Millennium: Another Approach

International Nuclear Information System (INIS)

Sculthorpe, Barruy R.

2002-01-01

Nuclear units nationwide are struggling to increase plant reliability and availability while at the same time reduce their operating and maintenance costs. Some very costly investments have been made in programs such as Reliability Centered Maintenance [RCM]. Florida Power and Light's approach at the St. Lucie Nuclear Plant has taken a slightly different approach. Building on our knowledge of the RCM process and an already existing 'World Class' Predictive Maintenance Program, a 'Condition-Based' Maintenance Program that takes advantage of the RCM philosophy and our toolbox full of advanced and highly successful predictive maintenance technologies. These tools currently consist of vibration analysis, lubricant analysis (both physical property and wear metals analysis, thermographic analysis, motor current signature analysis, tribology and process parameter trending. All employed with the intent to evaluate a machines health. This machine health check allows the forecasting of future preventative maintenance [PM's] tasks and the revision of existing PM's to maximize machine performance and eliminate 'no-value-added' maintenance activities/costs. Within the last year, the Condition-Based Maintenance Program has produced a cost saving of approximately $1.5 million dollars. As the program matures, these cost savings will accumulate well into the millennium. (authors)

Reliability-based maintenance evaluations and standard preventive maintenance programs

International Nuclear Information System (INIS)

Varno, M.; McKinley, M.

1993-01-01

Due to recent issuance of 10CFR50.65, the U.S. Nuclear Regulatory Commission maintenance rule (Rule), and the open-quotes Industry Guideline for Monitoring the Effectiveness of Maintenance at Nuclear Power Plantsclose quotes prepared by the Nuclear Management and Resources Council, many utilities are undertaking review or evaluation of current preventive maintenance (PM) programs. Although PM optimization and documentation are not specifically required by the Rule, an appropriate and effective PM program (PMP) will be the cornerstone of the successful and cost-effective implementation of the Rule. Currently, a project is being conducted at the Vermont Yankee Nuclear Power Station (VYNPS) in conjunction with Quadrex Energy Services to evaluate, optimize, and document the PMP. The project began in March 1993 and is scheduled for completion in mid-1995. The initial scope for the project is the evaluation of those structures, systems, and components that are within the scope of the Rule. Because of the number of systems to be evaluated (∼50), the desired completion schedule, and cost considerations, a streamlined approach to PM optimization and documentation is being utilized

Nuclear maintenance strategy and first steps for preliminary maintenance plan of the EU HCLL & HCPB Test Blanket Systems

Energy Technology Data Exchange (ETDEWEB)

Galabert, Jose, E-mail: jose.galabert@f4e.europa.eu [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); Hopper, Dave [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom); Neviere, Jean-Cristophe [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Nodwell, David [CCFE, Culham Science Centre, Abingdon, OX14 3DB, Oxfordshire (United Kingdom); Pascal, Romain [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Poitevin, Yves; Ricapito, Italo [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); White, Gareth [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom)

2017-03-15

Highlights: • Nuclear maintenance strategy for the two European (EU) Test Blanket Systems (TBS): i/. Helium Cooled Lead Lithium (HCLL) and ii/. Helium Cooled Pebble Bed (HCPB). • Preliminary identification of maintenance tasks for most relevant components of the EU HCLL & HCPB TBS. • Preliminary feasibility analysis for hands-on maintenance tasks of some relevant components of the European Test Blanket Systems. • Design recommendations for enhancement of the European Test Blanket Systems maintainability. - Abstract: This paper gives an overview of nuclear maintenance strategy to be followed for the European HCLL & HCPB Test Blanket Systems (TBS) to be installed in ITER. One of the several core documents to prepare in view of their licensing is their respective ‘Maintenance Plan’. This document is fundamental for ensuring sound performance and safety of the TBS during ITER’s operational phase and shall include, amongst others, relevant information on: maintenance organization, preventive and corrective maintenance task procedures, condition monitoring for key components, maintenance work planning, and a spare parts plan, just to mention some of the key topics. In compliance with the ITER Plant Maintenance policy, first steps have been taken aimed at defining nuclear maintenance strategy for some of the most relevant HCLL & HCPB TBS components, conducted by F4E in collaboration with industry. After a brief recall of maintenance strategy of the TBM Program (PBS-56), this paper analyses main features of EU HCLL & HCPB TBS maintainability and identifies, at their conceptual design phase, a preliminary list of maintenance tasks to be developed for their most representative components. In addition, the paper also presents the first nuclear maintenance studies conducted for replacement of the Q{sub 2} Getter Beds, identifying some design recommendations for their sound maintainability.

Nuclear maintenance strategy and first steps for preliminary maintenance plan of the EU HCLL & HCPB Test Blanket Systems

International Nuclear Information System (INIS)

Galabert, Jose; Hopper, Dave; Neviere, Jean-Cristophe; Nodwell, David; Pascal, Romain; Poitevin, Yves; Ricapito, Italo; White, Gareth

2017-01-01

Highlights: • Nuclear maintenance strategy for the two European (EU) Test Blanket Systems (TBS): i/. Helium Cooled Lead Lithium (HCLL) and ii/. Helium Cooled Pebble Bed (HCPB). • Preliminary identification of maintenance tasks for most relevant components of the EU HCLL & HCPB TBS. • Preliminary feasibility analysis for hands-on maintenance tasks of some relevant components of the European Test Blanket Systems. • Design recommendations for enhancement of the European Test Blanket Systems maintainability. - Abstract: This paper gives an overview of nuclear maintenance strategy to be followed for the European HCLL & HCPB Test Blanket Systems (TBS) to be installed in ITER. One of the several core documents to prepare in view of their licensing is their respective ‘Maintenance Plan’. This document is fundamental for ensuring sound performance and safety of the TBS during ITER’s operational phase and shall include, amongst others, relevant information on: maintenance organization, preventive and corrective maintenance task procedures, condition monitoring for key components, maintenance work planning, and a spare parts plan, just to mention some of the key topics. In compliance with the ITER Plant Maintenance policy, first steps have been taken aimed at defining nuclear maintenance strategy for some of the most relevant HCLL & HCPB TBS components, conducted by F4E in collaboration with industry. After a brief recall of maintenance strategy of the TBM Program (PBS-56), this paper analyses main features of EU HCLL & HCPB TBS maintainability and identifies, at their conceptual design phase, a preliminary list of maintenance tasks to be developed for their most representative components. In addition, the paper also presents the first nuclear maintenance studies conducted for replacement of the Q_2 Getter Beds, identifying some design recommendations for their sound maintainability.

Excellence through maintenance mastering

International Nuclear Information System (INIS)

Lamarche, M.; Guillot, M.; Monier, M.

1987-01-01

To improve the overall availability factor of nuclear power plants you have to cut either the forced outage role and the planned outage time or you need to reduce simultaneously the failures and the efforts devoted to avoiding them. Among other results, this goal leads to a decrease in the number of real or anticipated problems. Electricite de France policy, in this matter, is to focus on decreasing the compoents' maintenance needs through a comprehensive modification program, targeted to eliminating the weak points as revealed by the operation. Thereby one may reach, for simple equipment, a nearly maintenance-free condition in which the only maintenance needed is surveillance, which provides assurance that everything is operating properly. A good example of this type of equipment is the family of static components, drums, and pipes whose corrective maintenance is almost nil when their initial condition is good

ANALISIS KEMAMPUAN KEUANGAN DAERAH PEMERINTAH PROPINSI NUSA TENGGARA BARAT

Directory of Open Access Journals (Sweden)

Hery Susanto

2015-04-01

Full Text Available This research aims to analyze the regional finance capability in West Nusa Tenggara province. This research uses secondary data of primary source. The data are obtained from the government of West Nusa Tenggara Province in the form of data that has been processed and published and become a legitimate document such as calculation data of APBD in Budgetary Year of 2003-2007. The instruments are used in collecting the data is the analysis of the regional finance capability through Calculation and Work Analysis of PAD, which is the measurement of share and growth, thus classified the result with mapping the financial region capability based on quadrant method. This research draws some conclusions namely: (1 generally, contribution of PAD (share to the total region income of NTB Province TA 2003- 2007 was low, in spite of the growth of PAD was high; (2 based on the measurement of Index Financial Capability (IKK, NTB Province was in the scale index of 0,541. Furthermore, the classification based on the criteria level of regional finance capability, the regional finance capability in NTB Province in 2003 -2007 was a province with high financial capability. There are some suggestions that could be offered to the Government of NTB Province; first, improving PAD share in NTB Province through the excavation of PAD potential sources. Second, concerning with the region cost efficiency, considering that the proportion of PAD achievement was fairly small comparing to the allocation of Region Cost. Penelitian ini bertujuan untuk menganalisis kemampuan keuangan daerah di Propinsi Nusa Tenggara Barat . Penelitian ini menggunakan data sekunder dari sumber utama. Data diperoleh dari pemerintah Propinsi Nusa Tenggara dalam bentuk data yang telah diolah dan dipublikasikan dan menjadi dokumen yang sah seperti data perhitungan APBD Tahun Anggaran 2003-2007. Instrumen yang digunakan dalam pengumpulan data adalah analisis kemampuan keuangan daerah melalui Perhitungan dan

Electric motor predictive and preventive maintenance guide

International Nuclear Information System (INIS)

Oliver, J.A.

1992-07-01

Electric motor performance is vital to the reliable and efficient operation of power plants. The failure of one or more critical motors could cause lost capacity and excessive repair and maintenance cost. However, existing maintenance recommendations proposed by vendors for electric motors have sometimes encouraged many overly conservative maintenance practices. These practices have lead to excessive maintenance activities and costs which have provided no extra margin of operability. EPRI has sponsored RP2814-35 to develop a guide which provides power plants with information and guidance for establishing an effective maintenance program which will aid in preventing unexpected motor failures and assist in planning motor maintenance efforts. The guide includes a technical description which summarizes technical data relative to the four basic types of motors and their components in general use in power plants. The significant causes of motor failures are investigated and described in detail and methods to optimize service life and minimize maintenance cost through appropriate preventive maintenance and conditioning program are presented. This guide provides a foundation for an effective electric motor maintenance program and simplifies the selection of predictive and preventive maintenance tasks. Its use will enable maintenance personnel in nuclear and fossil plants to plan motor repairs during scheduled outages and avoid costly unexpected failures

ANALISIS PERILAKU SEKSUAL BERISIKO PADA REMAJA TERINFEKSI HIV DAN AIDS

Directory of Open Access Journals (Sweden)

Afritayeni Afritayeni

2018-03-01

penelitian eksplanatory research dengan pendekatan kuantitatif.Penelitian ini dilaksanakan dari bulan April-Oktober 2017.Jumlah sampel dalam penelitian ini adalah sebanyak 95 orang remaja yang terinfeksi HIV/ AIDS di Yayasan Sebaya Lancang Kuning dengan teknik pengambilan sampel accidental sampling. Pengumpulan data dilakukan dengan menggunakan data primer dan sekunder. Analisis data menggunakan analisis multivariat dengan uji regresi logistik berganda. Berdasarkan hasil penelitian dapat disimpulkan bahwa faktor yang paling dominan mempengaruhi perilaku seksual remaja adalah dorongan seksual.

The ITER remote maintenance system

International Nuclear Information System (INIS)

Tesini, A.; Palmer, J.

2008-01-01

The aim of this paper is to summarize the ITER approach to machine components maintenance. A major objective of the ITER project is to demonstrate that a future power producing fusion device can be maintained effectively and offer practical levels of plant availability. During its operational lifetime, many systems of the ITER machine will require maintenance and modification; this can be achieved using remote handling methods. The need for timely, safe and effective remote operations on a machine as complex as ITER and within one of the world's most hostile remote handling environments represents a major challenge at every level of the ITER Project organization, engineering and technology. The basic principles of fusion reactor maintenance are presented. An updated description of the ITER remote maintenance system is provided. This includes the maintenance equipment used inside the vacuum vessel, inside the hot cell and the hot cell itself. The correlation between the functions of the remote handling equipment, of the hot cell and of the radwaste processing system is also described. The paper concludes that ITER has equipped itself with a good platform to tackle the challenges presented by its own maintenance and upgrade needs

Environmental analysis applied to schools. Methodologies for data acquisition; Analisi ambientale iniziale per gli istituti d'istruzione. Metodologia per l'acquisizione dei dati

Energy Technology Data Exchange (ETDEWEB)

Andriola, L; Ceccacci, R [ENEA, Div. Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, Rome (Italy)

2001-07-01

The environment analysis is the basis of environmental management for organizations and it is considered as the first step in EMAS. It allows to identify, deal with the issues and have a clear knowledge on environmental performances of organizations. Schools can be included in the organizations. Nevertheless, the complexity of environmental issues and applicable regulations makes very difficult for a school, that wants to implement an environmental management system (EMAS, ISO 14001, etc.), to face this first step. So, it has been defined an instrument, that is easy but complete and coherent with reference standard, to let schools choose their process for elaborating the initial environmental revue. This instrument consists, essentially, in cards that, if completed, facilitate the drafting of the environmental analysis report. [Italian] L'analisi ambientale iniziale costituisce il presupposto di qualsiasi azione di gestione ambientale da parte di un'organizzazione ed e' esplicitamente prevista, come prima tappa, in EMAS. Essa consente infatti di individuare ed approfondire le problematiche ambientali e di fotografare, per mezzo di riferimenti oggettivi, le prestazioni ambientali di un'organizzazione, e quindi anche di una scuola, in modo da poter stabilire e controllare nel tempo gli obiettivi di miglioramento. Tuttavia la complessita' delle problematiche ambientali e delle relative normative di riferimento rende estremamente difficoltoso, per un istituto scolastico che intenda intraprendere un percorso di gestione ambientale comunque finalizzato (EMAS, ISO 14001, Comunicazione ambientale, ecc.) compiere questo passo iniziale. E' stato pertanto realizzato uno strumento semplificato, ma comunque completo e coerente con gli standard di riferimento, per consentire alle scuole di effettuare il percorso di elaborazione di un'analisi ambientale iniziale. Lo strumento consiste essenzialmente in schede che, una volta compilate, faciliteranno la stesura del rapporto di

ANALISIS PENGARUH LEVERAGE, PROFITABILITY, DAN FOREIGN OWNERSHIP TERHADAP PENGUNGKAPAN INFORMASI TANGGUNG JAWAB SOSIAL PERUSAHAAN (CORPORATE SOCIAL RESPONSIBILITY

Directory of Open Access Journals (Sweden)

Sigit Handoyo

2017-11-01

Full Text Available Corporate Social Responsibility is defined as the voluntary activities undertaken by a company to operate in economic, social and environmentally sustainable manner. It's based on Pasal 74 Undang-Undang Perseroan Terbatas No. 40 Tahun 2007. The research aimed to analyze the factors influencing disclosure level of corporate social responsibility at mining sector that listed at Indonesian Stock Exchange (IDX period 2013-2014. In this research caracteristics of the company are consisting of leverage, profitability, and foreign ownership. The population taken in this research was all companies at mining sector that listed in IDX from 2013 to 2014. The method of data analisys was linear regression analisys with SPSS 20. Multiple linear regression analysis technique that used in this research to determine the effect of leverage, profitability and foreign ownership to Corporate Social Responsibility disclosure. Index of corporate social responsibility (CSR is measured with company's indicators disclosed by the number of indicator is set on G4 by Global Reporting Initiative (GRI. Leverage is defined by debt to asset ratio (DAR, profitability is defined by return on assets (ROA, and foreign ownership is defined by the amount of foreign ownership divided by number of outstanding shares. The result of this research showed that leverage and profitability have a positive and significant effect on the CSR disclosure, while the foreign ownership have no effect on CSR disclosure at the mining companies in Indonesia.

Digital maintenance field technology for the maintenance of nuclear power plant

International Nuclear Information System (INIS)

Sato, Tomomasa; Asama, Hajime; Kita, Nobuyuki; Numano, Masayoshi

2002-01-01

This paper proposes a concept of 'Digital Maintenance Field Technology', which enables human beings and working robots making fully use of the necessary information for maintenance activity not only in any location of the maintenance field (seamless in location) but also in any moment from the past to the future (seamless in time) and in any format in presenting to human (seamless in semantics). The paper points out the following three essential components of the technology: 1) 'Digital Field Construction Technology', 2) 'Digital Field Archival Technology' and 3) 'Digital Field Presentation Technology'. The necessary capabilities are extracted and our approaches and state of the art of realizing these capabilities are introduced in addition to present the state of the art of home application example. The future extension is also illustrated. (author)

Maintenance optimization after RCM

International Nuclear Information System (INIS)

Doyle, E.K.; Lee, C.-G.; Cho, D.

2005-01-01

Variant forms of RCM (Reliability Centered Maintenance) have been the maintenance optimizing tools of choice in industry for the last 20 years. Several such optimization techniques have been implemented at the Bruce Nuclear Station. Further cost refinement of the Station preventive maintenance strategy whereby decisions are based on statistical analysis of historical failure data are now being evaluated. The evaluation includes a requirement to demonstrate that earlier optimization projects have long term positive impacts. This proved to be a significant challenge. Eventually a methodology was developed using Crowe/AMSAA (Army Materials Systems Analysis Activity) plots to justify expenditures on further optimization efforts. (authors)

Strategy to maximize maintenance operation

OpenAIRE

Espinoza, Michael

2005-01-01

This project presents a strategic analysis to maximize maintenance operations in Alcan Kitimat Works in British Columbia. The project studies the role of maintenance in improving its overall maintenance performance. It provides strategic alternatives and specific recommendations addressing Kitimat Works key strategic issues and problems. A comprehensive industry and competitive analysis identifies the industry structure and its competitive forces. In the mature aluminium industry, the bargain...

Analisis Model Pembelajaran Tipe Think-Pair-Share Berbasis Pemecahan Masalah Terhadap Keterampilan Berpikir Tingkat Tinggi Siswa

Directory of Open Access Journals (Sweden)

Sumarli Sumarli

2018-03-01

Full Text Available Pembelajaran fisika sampai saat ini lebih mengutamakan penilaian hasil belajar tanpa menilai proses pembelajarannya. Selain itu, sistem penilaian prestasi siswa lebih banyak didasarkan melalui tes-tes yang sifatnya menguji kemampuan kognitif tingkat rendah sehingga menyebabkan rendahnya prestasi siswa Indonesia di bidang sains khususnya fisika yang masih di bawah rata-rata internasional. Kemampuan kognitif tingkat rendah ini belum melibatkan proses analisis siswa. Untuk melibatkan proses analisis siswa diperlukan tes yang menguji kemampuan kognitif tingkat tinggi. Namun untuk memberikan tes yang dapat menguji kemampuan kognitif tingkat tinggi diperlukan proses pembelajaran yang dapat memberikan pengalaman langsung pada siswa. Pembelajaran yang melatih keterampilan berpikir tingkat tinggi dapat dikembangkan melalui pembelajaran langsung dengan tujuan agar siswa dapat memperoleh ingatan dalam jangka panjang dan siswa juga dapat mengonstruk pengetahuannya sendiri, tetapi kenyataannya secara umum pembelajaran fisika didominasi dengan metode ceramah. Aktivitas siswa hanya terbatas pada mendengarkan, mencatat, menjawab pertanyaan bila guru memberikan pertanyaan, maka proses pembelajaran tersebut jelas tidak mendorong siswa untuk berpikir kritis dan kreatif dalam beraktivitas. Salah satu model pembelajaran yang sesuai dengan permasalahan tersebut adalah model pembelajaran tipe Think-Pair-Share (TPS berbasis pemecahan masalah. Model ini dapat mengembangkan keterampilan berpikir tingkat tinggi pada diri siswa, membuat siswa terlibat langsung dalam proses pembelajaran sehingga siswa belajar konstruktif tidak bersifat hapalan dan melatih siswa untuk melakukan proses berpikir dan mengungkapkan pendapat dalam memecahkan permasalahan yang ada. Dengan adanya model pembelajaran tersebut diharapkan dapat meningkatkan keterampilan berpikir tingkat tinggi siswa yang meliputi keterampilan menganalisis, mengevaluasi, dan menciptakan seiring dengan meningkatnya

Maintenance evaluation using risk based criteria

International Nuclear Information System (INIS)

Torres Valle, A.

1996-01-01

The maintenance evaluation is currently performed by using economic and, in some case, technical equipment failure criteria, however this is done to a specific equipment level. In general, when statistics are used the analysis for maintenance optimization are made isolated and whit a post mortem character; The integration provided by mean of Probabilistic Safety assessment (PSA) together with the possibilities of its applications, allow for evaluation of maintenance on the basis of broader scope criteria in regard to those traditionally used. The evaluate maintenance using risk based criteria, is necessary to follow a dynamic and systematic approach, in studying the maintenance strategy, to allow for updating the initial probabilistic models, for including operational changes that often take place during operation of complex facilities. This paper proposes a dynamic evaluation system of maintenance task. The system is illustrated by means of a practical example

Maintenance: problem and solution

CERN Multimedia

CERN Bulletin

2012-01-01

Equipment that is often unique, machines that are as old as the Laboratory, continuous and demanding performance requirements: these are the challenges faced by CERN’s accelerator maintenance teams. There are some twenty such teams, attached to different departments. A new project aims to standardise their procedures to make their work easier, and you can be a part of it.   “For the past year or so, the Accelerator and Technologies Sector and the GS Department have been working together on identifying the needs of the different teams that perform maintenance on CERN’s equipment. We are now ready to provide computer support with detailed specifics about the processes that need to be set up,” explains Goran Perinić, one of the leaders in CERN’s new Maintenance Management project (MMP). Since the LHC entered operation, the responsibilities of the technical teams have been broadened to cover maintenance of the collider and that of its injectors...

Analisis Perbandingan Cost Model dengan Revaluation Model dalam Penilaian Aset Tetap dan Pengaruhnya terhadap Laporan Posisi Keuangan pada PT. Mulia Industrindo Tbk

OpenAIRE

Alfian, Alfian

2012-01-01

2012 ABSTRAK ALFIAN, A311 06 036, Analisis Perbandingan Cost Model dengan Revaluation Model dalam Penilaian Aset Tetap dan Pengaruhnya terhadap Laporan Posisi Keuangan pada PT. Mulia Industrindo Tbk, dibimbing oleh Drs. Mushar Mustafa, MM., Ak. (Pembimbing I) dan Drs. Asri Usman, M.Si., Ak. (Pembimbing II). Kata kunci: Cost Model, Revaluation Model, Laporan Posisi Keuangan. Penelitian ini bertujuan untuk mengetahui apakah perbandingan ...

Selecting Suitable Candidates for Predictive Maintenance

NARCIS (Netherlands)

Tiddens, Wieger Willem; Braaksma, Anne Johannes Jan; Tinga, Tiedo

2018-01-01

Predictive maintenance (PdM) or Prognostics and Health Management (PHM) assists in better predicting the future state of physical assets and making timely and better-informed maintenance decisions. Many companies nowadays ambition the implementation of such an advanced maintenance policy. However,

RCM [reliability-centered maintenance] at Ginna: Preventive maintenance program optimization at year 20

International Nuclear Information System (INIS)

Edgar, E.C.

1989-01-01

The reliability-centered maintenance (RCM) program at Rochester Gas ampersand Electric Company's Ginna station is entering its second year. Of the 20 systems originally selected for evaluation, 10 are in various stages of completion, and recommendations resulting from the earliest systems studied are now being implemented. As expected, few major discoveries have been made in terms of preventive maintenance program failings or excesses. The performance of the now 20-yr-old plant has been excellent in recent years, and objectives focus more on ensuring continued high standards of safety, reliability, and economy than on maintenance program cost reduction

Machine maintenance: the rules of the game

CERN Multimedia

Antonella Del Rosso

2013-01-01

GCO, GMIO, GSPO – ever heard of them? These acronyms stand for the “roles” that best practices identify as vital to successful maintenance management. CERN’s Maintenance Management Project (MMP) team is working with the technical departments to ensure that they implement these procedures when they deal with the maintenance of the collider and its injectors and infrastructure.   The participants of the workshop on asset and maintenance management (AMMW2013), which took place at CERN in November. Since its creation in 2012, CERN’s Maintenance Framework Implementation Office (MFIO) has been promoting the deployment of harmonised maintenance management methods across the BE, GS, EN and TE Departments. “The definition and identification of the Group Coding Officers (GCO), Group Maintenance Information Officers (GMIO) and Group Spare Part Officers (GSPO) are one of the best practices that should be adopted each time a maintenance programme...

Condition based maintenance pilot projects at Pickering ND

International Nuclear Information System (INIS)

Zemdegs, R.T.

1995-01-01

Ontario Hydro has recognized that the approaches to maintenance have undergone significant changes to the past decades. The traditional break down maintenance approach has been replaced by preventative maintenance and more recently, by condition based maintenance. The nuclear plants of Ontario Hydro have evaluated on a number of alternative programs to improve their maintenance effectiveness and to reduce costs, including Reliability Centred Maintenance (RCM), call-up review, component-based PM programs, analysis of failure history and so on. Pickering ND (nuclear division) and Ontario Hydro's Nuclear Technologies Services Division, have embarked on a Condition Based Maintenance pilot project to address the above issues as a breakthrough solution for smarter maintenance. The Condition Based Maintenance pilot project will demonstrate an end-to-end process utilizing a Reliability Centred Maintenance structured approach to re-engineer and redefine the existing maintenance programs. The project emphasizes on-condition maintenance where justified, and utilizes an information management tool to provide the required records keeping and analysis infrastructure. This paper briefly describes the planned maintenance model at Pickering ND used to guide the CBM pilot, and an overview of the methodology used to develop on-condition equipment indicators as part of a re-engineered maintenance plan

GRAPHICAL MODELS OF THE AIRCRAFT MAINTENANCE PROCESS

OpenAIRE

Stanislav Vladimirovich Daletskiy; Stanislav Stanislavovich Daletskiy

2017-01-01

The aircraft maintenance is realized by a rapid sequence of maintenance organizational and technical states, its re- search and analysis are carried out by statistical methods. The maintenance process concludes aircraft technical states con- nected with the objective patterns of technical qualities changes of the aircraft as a maintenance object and organizational states which determine the subjective organization and planning process of aircraft using. The objective maintenance pro- cess is ...

Analisis Dan Perancangan Arsitektur Community Cloud Computing Untuk Menunjang Pelayanan Kesehatan Ibu Dan Anak (Studi Kasus: Puskesmas Se-Kota Mataram

Directory of Open Access Journals (Sweden)

Andy Hidayat Jatmika

2018-03-01

Full Text Available Banyaknya kunjungan dan informasi kesehatan selama kehamilan sampai dengan setelah melahirkan membuat Pelayanan Kesehatan Ibu dan Anak (PKIA menjadi pelayanan yang paling sibuk di sebuah puskesmas. Pasien yang melakukan pemeriksaan kesehatan biasanya memilih Puskesmas yang paling dekat dengan tempat tinggalnya sehingga data pasien seperti rekam medis akan tercatat pada Puskesmas dimana pasien mendaftar. Apabila pasien pindah tempat tinggal dan memilih Puskesmas yang baru maka pasien akan didata ulang sehingga kurang efektif. Pasien juga diberikan buku KIA yang berisi informasi penting mengenai kesehatan ibu dan anak sehingga tidak boleh hilang ataupun rusak, namun resiko kehilangan atau kerusakan mungkin saja terjadi. Tujuan penelitian ini adalah membuat desain arsitektur community cloud computing dimana seluruh Puskesmas di Kota Mataram tergabung dalam komunitas cloud. Data rekam medis pasien tersimpan di data center sehingga dapat diakses dari Puskesmas mana saja dan dapat pula digunakan untuk mengakses aplikasi-aplikasi yang dimiliki Puskesmas baik itu aplikasi berbasis web ataupun aplikasi berbasis mobile. Terdapat dua metode yang digunakan pada penelitian ini yaitu (1 analisis proses bisnis dan (2 desain arsitektur sistem. Hasil akhir penelitian ini berupa analisis kebutuhan model bisnis PKIA yang digambarkan dalam bentuk use case diagram sebagai bagian dari layanan Software as a Service (SaaS dan prototype arsitektur community cloud Puskesmas di Kota Mataram.

Maintenance and Outage Management Assessment (MOMA)

International Nuclear Information System (INIS)

2005-01-01

The competitive environment has significant implications for nuclear power plant (NPP) operations, which include, inter alia, the need for efficient use of resources and effective management of plant activities of maintenance and outages. The purpose of NPP maintenance and outages is to allow NPPs to use all those functions necessary for safe and reliable power production by keeping them available and adequate maintenance programme is essential. The maintenance programme covers all preventive and remedial measures, both administrative and technical, necessary to identify and mitigate degradation of a functioning system, structure or component, or restore the design functions of a failed system, structure or component to an acceptable level. In response to the needs of MSs, NPES (Nuclear Power Section, Division of Nuclear Power, IAEA) plans to strengthen its services. NPES services will not only continue to provide its 'traditional' products of publications of nuclear industrial best practices and technical implementation of TC projects on plant maintenance and outage management, but also be expanded to deliver, in a timely manner, technical support missions as requested by MSs for NPPs. One of many services is Maintenance and Outage Management Assessment (MOMA). The NPP can obtain support and assistance in assessment and optimisation of its maintenance program and/or outage management. It aims to help the NPP improve its performance of maintenance and outage in a competitive nuclear power business environment. The specific benefits of the assessment are as follows: a) disseminate nuclear industrial best practices on maintenance program and outage management in the world, b) benchmark, evaluate and optimise the approach of maintenance program and outage management and c) identify solutions to known problems at nuclear power plants, if any. MOMA is conducted at the request of NPPs of any IAEA Member States. MOMA consists in a technical mission/visit for 1-3 weeks by

Collaborative learning in condition based maintenance

NARCIS (Netherlands)

Koochaki, J.; Ao, SI; Gelman, L; Hukins, DWL; Hunter, A; Korsunsky, AM

2009-01-01

In recent years, the importance of reliable and consistent production equipments has increased. As a result, companies are shifting their maintenance policy from preventive maintenance towards Condition Based Maintenance (CBM). Despite the growing trend in this area and success stories of CBM

Maintenance Staffing Standards for Zero-Based Budgeting.

Science.gov (United States)

Adams, Matthew C.; And Others

1998-01-01

Discusses school preventive maintenance and the variables associated with maintenance staffing standards that address a zero-based budgeting environment. Explores preventive-maintenance measurement for staffing requirements, defines staffing levels and job descriptions, and outlines the factors to consider when creating a maintenance program and…

ANALISIS MODEL PENERIMAAN PENGGUNA SISTEM PELAPORAN PAJAK ONLINE

Directory of Open Access Journals (Sweden)

Muhammad Malik Hakim

2016-04-01

Full Text Available Direktorat Jenderal Pajak saat ini telah menerapkan e-SPT dan e-Filing sebagai sarana digitalisasi dan otomasi pelaporan pajak. Untuk meningkatkan transformasi bisnis proses dalam sistem pelayanan perpajakan dari sistem manual ke digital, diperlukan kesiapan dan penerimaan pengguna yang cukup memadai. Studi dan analisis perlu dilakukan untuk mengetahui sejauh mana tingkat penerimaan pengguna dalam menggunakan sistem e-SPT dan e- Filing. Studi dilakukan secara kuantitatif menggunakan model UTAUT yang telah dimodifikasi untuk menganalisis model penerimaan pengguna yang merupakan Wajib Pajak Orang Pribadi yang telah menggunakan e-SPT dan e- Filing. Jumlah responden dalam penelitian ini sejumlah 235 responden yang disebarkan dengan cara snow ball sampling. Hasil penelitian menunjukkan perbedaan model penerimaan e-SPT dan e-Filing dari jenis kelamin dan kelompok umur. Pengaruh harapan kinerja (PE dan pengaruh sosial (SI terhadap niat perilaku (BI, serta pengaruh niat perilaku (BI pada penggunaan aktual (AU pada pria lebih kuat dibandingkan pada wanita. Sebaliknya, pengaruh harapan usaha (EE terhadap niat perilaku (BI dan fasilitas pendukung / penunjang (FC terhadap penggunaan aktual (AU pada wanita dijumpai memberikan pengaruh yang lebih kuat. Selain itu, di dalam kelompok umur, pengaruh terhadap semua variabel yang diteliti ternyata lebih kuat pada kelompok umur 25 35 tahun. Kata kunci: model penerimaan pengguna, UTAUT, pelaporan pajak, e-SPT, e-filing.

Mobile network maintenance (GSM)

CERN Multimedia

IT Department

2009-01-01

Maintenance work will be carried out on the CERN mobile network infrastructure (GSM) on the 23 and 24 July from 6 p.m. to 6 a.m. in order to replace discontinued equipment and to increase the bandwidth capacity of the GSM mobile network. All CERN GSM emitters (40 units) will be moved one by one to the new infrastructure during the maintenance. The call of a user connected to an emitter at the time of its maintenance will be cut off. However, the general overlapping of the GSM radio coverage should mean that users are able immediately to call again should their call be interrupted. IT/CS/CS

Initiating statistical maintenance optimization

International Nuclear Information System (INIS)

Doyle, E. Kevin; Tuomi, Vesa; Rowley, Ian

2007-01-01

Since the 1980 s maintenance optimization has been centered around various formulations of Reliability Centered Maintenance (RCM). Several such optimization techniques have been implemented at the Bruce Nuclear Station. Further cost refinement of the Station preventive maintenance strategy includes evaluation of statistical optimization techniques. A review of successful pilot efforts in this direction is provided as well as initial work with graphical analysis. The present situation reguarding data sourcing, the principle impediment to use of stochastic methods in previous years, is discussed. The use of Crowe/AMSAA (Army Materials Systems Analysis Activity) plots is demonstrated from the point of view of justifying expenditures in optimization efforts. (author)

Sensor/signal monitoring and plant maintenance

International Nuclear Information System (INIS)

Ciftcioglu, Oe.; Tuerkcan, E.

1994-02-01

Nuclear Power Plant (NPO) availability is determined by the intended functionality of safety related system and components. Therefore, maintenance is an important issue in a power plant connected to the plant's reliability and safety. The traditional maintenance policies proved to be rather costly and even not effectively addressing NPP requirements. Referring to these drawbacks, in the last decade, in the nuclear reliability centered maintenance (RCM) gained substantial interest due to its merits. In the formal implementation of RCM, apparently, predictive maintenance is not considered. However, with the impact of modern real-time and on-line surveillance and monitoring methodologies, the predictive maintenance procedures like sensor/signal verification and validation are to be included into RCM. (orig.)

Building Maintenance Management System for Heritage Museum

OpenAIRE

Md Azree Othuman Mydin; Siti Hajar Ismail; Norhidayah Md Ulang

2012-01-01

An investment in the building maintenance aspect is massive throughout the world. In most of the countries, it signifies approximately 50% of the entire revenue of the construction industry. The value of buildings depends on the eminence of the maintenance invested in them. Maintenance management engages obtaining utmost advantage from the investment made on the maintenance activities. At the moment, maintenance in buildings in Malaysia is on the increase in spite of size, ...

Lifetime oriented maintenance planning in the Netherlands

NARCIS (Netherlands)

Straub, A.

2003-01-01

In this paper we set up a framework for lifetime oriented maintenance planning as an outcome and input for strategic housing stock management. The maintenance planning holds maintenance activities and costs in the longer term. We consider the maintenance planning as a tool to calculate and implement

Remote maintenance development

International Nuclear Information System (INIS)

Zook, C.R.

1979-01-01

The concept of remote maintenance as it pertains to nuclear fuel fabrication facilities is quite unique. The future may require completely remote facilities where maintenance will be performed by hybrid manipulators/robots. These units will be capable of being preprogrammed for automatic operation or manually operated with the operator becoming a part of the closed loop control system. These robots will mesh television, computer control, and direct force feedback manual control in a usable new concept of robotics

Structuring AHP-based maintenance policy selection

NARCIS (Netherlands)

Goossens, Adriaan; Basten, Robertus Johannes Ida; Hummel, J. Marjan; van der Wegen, Leonardus L.M.

2015-01-01

We aim to structure the maintenance policy selection process for ships, using the Analytic Hierarchy Process (AHP). Maintenance is an important contributor to reach the intended life-time of capital technical assets, and it is gaining increasing interest and relevance. A maintenance policy is a

Computerizing Maintenance Management Improves School Processes.

Science.gov (United States)

Conroy, Pat

2002-01-01

Describes how a Computerized Maintenance Management System (CMMS), a centralized maintenance operations database that facilitates work order procedures and staff directives, can help individual school campuses and school districts to manage maintenance. Presents the benefits of CMMS and things to consider in CMMS selection. (EV)

Maintenance program guidelines for programmatic equipment

International Nuclear Information System (INIS)

1994-11-01

The Division Directors at Lawrence Berkeley Laboratory are responsible for implementing a maintenance program for research equipment (also referred to as programmatic equipment) assigned to them. The program must allow maintenance to be accomplished in a manner that promotes operational safety, environmental protection and compliance, and cost effectiveness; that preserves the intended functions of the facilities and equipment; and that supports the programmatic mission of the Laboratory. Programmatic equipment -- such as accelerators, lasers, radiation detection equipment, and glove boxes -- is dedicated specifically to research. Installed equipment, by contrast, includes the mechanical and electrical systems installed as part of basic building construction, equipment essential to the normal functioning of the facility and its intended use. Examples of installed equipment are heating, ventilating, and air conditioning systems; elevators; and communications systems. The LBL Operating and Assurance Program Plan (PUB-3111, Revision 4) requires that a maintenance program be prepared for programmatic equipment and defines the basic maintenance program elements. Such a program of regular, documented maintenance is vital to the safety and quality of research activities. As a part of that support, this document offers guidance to Laboratory organizations for developing their maintenance programs. It clarifies the maintenance requirements of the Operating and Assurance Program (OAP) and presents an approach that, while not the only possibility, can be expected to produce an effective maintenance program for research equipment belonging to the Laboratory's organizations

Asbestos exposure of building maintenance personnel.

Science.gov (United States)

Mlynarek, S; Corn, M; Blake, C

1996-06-01

The exposures of building maintenance personnel and occupants to airborne asbestos fibers, and the effects of operations and maintenance programs on those exposures, continue to be an important public health issue. The subject of this investigation was a large metropolitan county with numerous public buildings which routinely conducted air sampling for asbestos. A total of 302 personal air samples in nine task categories collected during maintenance worker activities in proximity to asbestos-containing materials were analyzed; 102 environmental air samples in four task categories were also analyzed. The arithmetic means of the 8-hr time weighted average exposures for personal sampling for each task category were all below the Occupational Safety and Health Administration permissible exposure level of 0.1 fibers (f)/cc > 5 microm. The highest mean 8-hr time weighted average exposure was 0.030 f/cc > 5 microm for ceiling tile replacement. The maximum asbestos concentration during sample collection for environmental samples was 0.027 f/cc > 5 microm. All asbestos-related maintenance work was done within the framework of an Operations and Maintenance Program (OMP) which utilized both personal protective equipment and controls against fiber release/dispersion. Results are presented in association with specific OMP procedures or controls. These results support the effectiveness of using Operations and Maintenance Programs to manage asbestos in buildings without incurring unacceptable risk to maintenance workers performing maintenance tasks.

Maintenance technologies for reactor internals

Energy Technology Data Exchange (ETDEWEB)

Sato, Kenji [Nuclear Energy Systems and Services Div., Toshiba Corp., Tokyo (Japan); Kobayashi, Masahiro [Toshiba Corp., Yokohama (Japan). Keihin Product Operations; Sano, Yuji; Kimura, Seiichiro [Power and Industrial Systems Research and Development Center, Toshiba Corp., Tokyo(Japan)

2000-10-01

Toshiba places the highest priority on maintenance technologies for the reactor pressure vessel (RPV) and its internals in operating nuclear power plants. This paper summarizes the status of applied laser maintenance technologies, both preventive and repair. For laser peeing and laser desensitization treatment (LDT) technologies in particular, field applications are also described in detail. In the future, the area of field applications for preventive maintenance, repair, and inspection technologies will be further expanded. (author)

Upgrade of maintenance technologies of Nuclear Power Plants

International Nuclear Information System (INIS)

Kamada, Kazuaki

2005-01-01

In order to enhance long-term safe and stable operation of Ikata Nuclear Power Plants (NPPs) in more efficient way, maintenance technology upgrade project was started aiming at establishment of simplified and efficient self-maintenance system with affiliated companies. Maintenance technique and supervisor qualification system was introduced after improvement and reinforcement of personnel education and training. Reflecting investigation of maintenance activities of US NPPs and productivity improvement in other industries, preventive maintenance optimization project had been performed such as introduction of key performance indicator (KPI), new system incorporating reliability-centered maintenance (RCM) and condition-based maintenance (CBM), and on-line monitoring and maintenance (OLM) based on risk assessment. Enterprise asset management (EAM) to establish information data base and total productive maintenance (TPM) action for every personnel to participate in self-maintenance was also introduced. (T. Tanaka)

Risk-based maintenance-Techniques and applications

International Nuclear Information System (INIS)

Arunraj, N.S.; Maiti, J.

2007-01-01

Plant and equipment, however well designed, will not remain safe or reliable if it is not maintained. The general objective of the maintenance process is to make use of the knowledge of failures and accidents to achieve the possible safety with the lowest possible cost. The concept of risk-based maintenance was developed to inspect the high-risk components usually with greater frequency and thoroughness and to maintain in a greater manner, to achieve tolerable risk criteria. Risk-based maintenance methodology provides a tool for maintenance planning and decision making to reduce the probability of failure of equipment and the consequences of failure. In this paper, the risk analysis and risk-based maintenance methodologies were identified and classified into suitable classes. The factors affecting the quality of risk analysis were identified and analyzed. The applications, input data and output data were studied to understand their functioning and efficiency. The review showed that there is no unique way to perform risk analysis and risk-based maintenance. The use of suitable techniques and methodologies, careful investigation during the risk analysis phase, and its detailed and structured results are necessary to make proper risk-based maintenance decisions

A COMPUTER BASED MAINTENANCE MANAGEMENT SYSTEM ...

African Journals Online (AJOL)

... programs to schedule for maintenance or replacement of machines has been designed such that it enables the maintenance department control all jobs associated with plant maintenance and breakdown. It predicts the time to failure of designated plants and caters for the replacement analysis of some capital equipment.

ANALISIS PROKSIMAT DAN TOKSISITAS AKUT EKSTRAK DAUN SIRIH MERAH YANG BERPOTENSI SEBAGAI ANTIDIABETES

Directory of Open Access Journals (Sweden)

Mega Safithri

2012-11-01

Full Text Available ABSTRACTThe aim of this study was to explore the analysis proximate and toxicity of the decoctions of P. crocatum. Fresh leaves of P. crocatum were boiled in water in order to obtain decoction and were examined for its chemical compounds by using SNI 01-2891-1992 method for proximate analysis. Toxicity of decoction extract of P. crocatum was orally fed to rats (Sprague dawley. The results showed that P. crocatum leaves contains 9.27% water, 14.33% ash, 3.96% fat, 22.63% proteins, and 59.08% carbohydrates. Acute toxicity test showed that all rats were still alive after 7 days treatment with P. crocatum decoction for all dose groups (0, 5, 10, and 20 g/kg BB. LC50 value of P. crocatum decoction was 544.82 ppm, meaning that the decoction was relatively harmless and bioactive.Key words: Piper crocatum, proximate analysis, toxicity, antidiabeticABSTRAKPenelitian ini bertujuan menentukan kadar air, abu, protein, lemak, dan karbohidrat dari rebusan daun sirih merah (Piper crocatum serta mempelajari toksisitasnya. Daun segar sirih merah direbus dalam air mendidihuntuk mendapatkan dekokta/rebusan yang akan dianalisis kandungan senyawa kimianya menggunakan metode SNI 01-2891-1992. Uji toksisitas menggunakan tikus putih galur Sprague dawley untuk menentukan LD50nya dan menggunakan larva udang untuk menentukan LC50 nya. Hasil analisis proksimat menunjukkan bahwa daun sirih merah mengandung 9.27% air, 14.33% abu, 3.96% lemak, 22.63 % protein, dan 59.08% karbohidrat.Hasil uji toksisitas menunjukkan bahwa selama 24 jam sampai 7 hari setelah diberikan dekokta, tidak ada tikus yang mati pada semua kelompok dosis (0, 5, 10, maupun 20 g/kg BB. Tidak adanya kematian pada semua dosis yang diujikan dapat dikatakan bahwa dekokta sirih merah tidak toksik. Nilai LC50 untuk air rebusan sirih merah terjadi pada konsentrasi 544.82 ppm. Hal ini menunjukkan bahwa air rebusan sirih merah memiliki potensi bioaktivitas.Kata kunci: Piper crocatum, analisis proksimat, toksisitas

Status of online maintenance in the world

International Nuclear Information System (INIS)

Mizumachi, Wataru; Kobayashi, Masahide

2009-01-01

In many countries, online maintenance has been already introduced. Especially in US, online maintenance has been introduced to many nuclear plants which has (N+1) redundant safety systems as Japanese plants. There experience will contribute us to discuss how to introduce online maintenance in Japan. In IAEA's nuclear safety criteria and guidance, it is recognized that the outage of one safety system for maintenance is usual operation. This is normal sense in the world. In US, the risk when online maintenance is done is controlled mainly by PRA. We have to discuss how to introduce online maintenance in JAPAN under these conditions in the world. (author)

La qualità dell'eLearning Un approccio qualitativo per l'analisi dei feedback degli studenti e dei docenti

Directory of Open Access Journals (Sweden)

Patrizia Ghislandi

2012-11-01

Full Text Available La discussione sulla qualità dell'eLearning accademico si sta orientando verso una critica dei modelli di qualità più legati alla produzione industriale, che sono principalmente fondati sulla conformità a standards prestabiliti, i quali a loro volta richiedono generalmente metodi di valutazione quantitativi (Ehlers & Schneckenberg, 2010, Ghislandi, 2008, 2012. In ambito formativo questo implica una visione molto centrata sui risultati (outputs e sull'impatto (outcomes, con scarsa attenzione ai processi. Una visione innovativa della qualità richiede la profonda comprensione di elementi contestuali complessi, delle interazioni e dimensioni relazionali spesso invisibili dagli strumenti quantitativi; e, soprattutto, della generazione di logiche partecipate che aumentino la consapevolezza degli attori coinvolti nei processi che portano alla qualità del modello formativo. In questo lavoro, attraverso la presentazione di uno studio di caso di formazione continua blended, viene introdotto un approccio per il monitoraggio della qualità dell'eLearning. Tale approccio predilige metodologie di analisi qualitativa e partecipata, basate sulla riflessione e  sull’utilizzo di rubric per l’analisi dell’attività formativa. Tale approccio, secondo le autrici, risulta coerente sia dal punto di vista metodologico sia da quello epistemologico, con una nuova visione della qualità come processo continuo di riflessione sulla valutazione dell'esperienza formativa alla scoperta del senso e dei valori portanti della stessa.

ANALISIS TATA KELOLA OPTIMALISASI SUMBER DAYA SISTEM INFORMASI MANAJEMEN JEMBATAN TIMBANG (EDM04 BERDASARKAN KERANGKA KERJA COBIT 5 PADA DINAS PERHUBUNGAN KOMUNIKASI DAN INFORMATIKA PROVINSI JAWA TENGAH

Directory of Open Access Journals (Sweden)

Yudistira Dian Hastiti

2016-06-01

Full Text Available Dinas Perhubungan Komunikasi dan Informatika (Dinhubkominfo Provinsi Jawa tengah sebagai perumus dan pelaksana kebijakan teknis, fasilitator, dan evaluator terkait penyelengaraan kegiatan penimbangan kendaraan bermotor melalui 16 jembatan timbang yang tersebar di wilayah provinsi jawa tengah telah mengimplementasikan sebuah system yang dipergunakan untuk kemudahan dalam menimbang kendaraan dengan mendata setiap kendaraan pada suatu system yang disebut Sistem Informasi Manajemen Jembatan Timbang (SIM JT. Masalah yang ditemukan saat ini yaitu, melihat padatnya antrian panjang kendaraan yang akan ditimbang disebabkan karena SIM JT yang belum memiliki database identitas kendaraan dan tidak dapat terpantau secara real time yang terjadi saat local server dalam keadaan down. Berdasarkan hal tersebut Dinhubkominfo berupaya mengoptimalkan kinerja SIM JT baik dari segi sumber daya manajemen manusia, TI, serta keuangan untuk meminimalkan kesalahan serta meningkatkan efektifitas pelayanan. Dari hasil studi dokumen, wawancara, dan kuesioner  berdasarkan COBIT 5 menghasilkan tingkat kapabilitas tata kelola proses optimalisasi sumer daya (EDM04 pada Dinas Perhubungan Komunikasi dan Informatika Provinsi Jawa Tengah saat ini berada di level 3 dengan status pencapaian Largely Achieved sebesar 80,18% setara dengan 3,80 dimana level 0, 1, dan 2 mencapai status Fully Achieved. Hal ini menunjukan telah mengelola dengan baik proses optimalisasi sumber daya dan diimplementasikan untuk mendukung pengerjaan proses standar dan efektif. Untuk mencapai tingkat target, Dinhubkominfo dapat melakukan strategi perbaikan dengan memperhatikan secara bertahap dari proses atribut level 1 sampai 4 Kata Kunci: Analisis Tata Kelola TI, COBIT 5, Sistem Informasi Manajemen Jembatan Timbang, Analisis Tingkat Kapabilitas, Analisis Kesenjangan.

ANALISIS KADAR SIKLAMAT PADA ES KRIM DI KOTA BANJARBARU

Directory of Open Access Journals (Sweden)

Nurlailah Nurlailah

2017-07-01

Full Text Available Pemanis merupakan salah satu komponen yang sering ditambahkan dalam bahan makanan. Pemanis buatan yang banyak beredar di masyarakat adalah siklamat. Konsumsi siklamat yang melebihi dosis akan mengakibatkan kanker kandung kemih. Selain itu akan menyebabkan tumor paru, hati, dan limfa. Tujuan penelitian ini adalah untuk mengetahui adanya siklamat dalam es krim yang melebihi ambang batas yang dipersyaratkan. Jenis penelitian ini adalah survey deskriptif. Sampel penelitian adalah es krim produksi rumah tangga dari seluruh pedagang es krim di Banjarbaru utara yaitu dengan jumlah 11 pedagang es krim. Variabel dalam penelitian ini adalah kadar siklamat yang terdapat dalam es krim. Hasil penelitian menunjukkan dari 11 sampel es krim yang diperiksa, 9 sampel mengandung siklamat dengan kadar tertinggi 7,37 g/kg sebagai asam siklamat. Kesimpulan penelitian ini adalah es krim yang mengandung siklamat ditemukan sebanyak 82% (9 sampel, sedangkan 18% (2 sampel lainnya negatif, dari 9 sampel yang positif mengandung siklamat, 89% tidak memenuhi syarat PERMENKES Nomor 208 tahun 1985 yaitu melebihi 2 gr/kg sebagai asam siklamat. Perlu dilakukan pemeriksaan yang lebih spesifik untuk analisis kadar siklamat dengan metode lain seperti Kromatografi Cair Kinerja Tinggi (KCKT

ANALISIS PENGARUH TINGKAT KESEHATAN BANK TERHADAP RETURN ON ASSET

Directory of Open Access Journals (Sweden)

Andy Setiawan

2017-10-01

Full Text Available Penelitian  ini  dilakukan  untuk  menganalisis pengaruh  tingkat kesehatan bank terhadap return on asset (ROA berdasarkan metode risk based bank rating (RBBR. Variabel independen yang diteliti adalah Non  Performing  Loan  (NPL, Loan to Deposit Ratio (LDR, Net Interest Margin (NIM, Capital Adequacy Ratio (CAR,  BOPO   (Biaya   Operasional/Pendapatan Operasional, Good Corporate Governance (GCG dan Posisi  Devisa  Netto  (PDN terhadap variabel dependen Return On Asset (ROA. Sampel yang digunakan  adalah  seluruh bank BUKU 4 di Indonesia selama periode 2007-2014. Teknik analisis data yang  digunakan  adalah  regresi  linier  berganda. Hasil penelitian ini menunjukkan bahwa tingkat kesehatan bank dengan metode RBBR berpengaruh signifikan secara bersama terhadap ROA. Secara parsial LDR, NIM, BOPO, dan PDN berpengaruh signifikan terhadap ROA. Sedangkan variabel NPL, GCG dan CAR tidak berpengaruh signifikan. Kemampuan prediksi dari ketujuh variabel  tersebut  terhadap  ROA  dalam  penelitian  ini  sebesar  93,7%,  sedangkan sisanya 6,3% dipengarui oleh faktor lain yang tidak dimasukkan ke dalam model penelitian.

14 CFR 145.217 - Contract maintenance.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Contract maintenance. 145.217 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.217 Contract maintenance. (a) A certificated repair station may contract a maintenance function pertaining to an article to an...

ANALISIS RESPON PEMANGKU KEPENTINGAN DI DAERAH TERHADAP KEBIJAKAN HUTAN TANAMAN RAKYAT

Directory of Open Access Journals (Sweden)

Tuti Herawati

2014-08-01

Full Text Available Tujuan penelitian adalah menganalisis respon para pemangku kepentingan di daerah terhadap kebijakan Hutan Tanaman Rakyat. Penelitian menggunakan metode pendekatan kuantifikasi data kualitatif. Lokasi penelitian ditentukan secara sengaja dengan pertimbangan tingginya potensi pengembangan kegiatan HTR, yaitu di Provinsi Kalimantan Selatan dan Riau. Hasil penelitian menunjukkan bahwa masyarakat di Kalimantan Selatan, khususnya mereka yang telah terlibat dalam pengembangan tanaman kehutanan memiliki minat yang tinggi untuk menjadi peserta program HTR. Sedangkan masyarakat di Riau kurang berminat terhadap program penanaman tanaman kehutanan, disebabkan adanya pengalaman buruk di masa sebelumnya. Para pemangku kepentingan di tingkat kabupaten yang terdiri dari pihak pemerintah daerah dan swasta menyambut baik program tersebut, dan mendukung terselenggaranya program sebagai upaya peningkatan kesejahteraan masyarakat sekitar hutan. Berdasarkan hasil analisis stakeholder diketahui bahwa terdapat sejumlah pemangku kepentingan di daerah yang memiliki posisi dan pengaruh penting untuk keberhasilan program. Hal ini berimplikasi bahwa para pengambil kebijakan di tingkat pusat harus mempertimbangkan aspirasi mereka untuk mewujudkan keberhasilan program HTR.

Analisis SWOT Implementasi Tekonologi Finansial terhadap Kualitas Layanan Perbankan di Indonesia

Directory of Open Access Journals (Sweden)

Imanuel Adhitya Wulanata Chrismastianto

2017-04-01

Menyikapi realisasi era digital saat ini, kualitas layanan perbankan di Indonesia diharapkan semakin meningkat secara signifikan, agar mampu menjangkau seluruh lapisan masyarakat, khususnya bagi masyarakat yang tinggal di daerah 3T (Terdepan, Terluar, dan Terpencil. Namun, pada kenyataannya kualitas layanan perbankan di Indonesia saat ini masih minim dalam mengakses masyarakat yang tinggal di daerah 3T tersebut. Mencermati berbagai realita yang telah diuraikan di atas, maka melalui analisis SWOT implementasi kebijakan teknologi finansial ini, diharapkan kualitas layanan perbankan semakin dapat ditingkatkan dan dirasakan oleh seluruh lapisan masyarakat Indonesia secara riil dan para pelaku perbankan dapat memahami pengelolaan fungsi manajemen perbankan dengan tepat didasarkan pada sikap takut akan Tuhan dan menghargai sesama, dalam konteks pengelolaan aset internal maupun eksternal yang mencakup aktivitas perbankan secara holistik. Dengan demikian, tulisan ini bertujuan untuk menganalisis secara lebih mendalam mengenai kekuatan, kelemahan, peluang, dan ancaman (SWOT implementasi teknologi finansial terhadap kualitas layanan perbankan Indonesia di era digital melalui studi literatur perbankan.

Analisis Framing Pemberitaan Media Online mengenai Kasus Pedofilia di Akun Facebook

Directory of Open Access Journals (Sweden)

Rieka Mustika

2017-12-01

Full Text Available Kasus terhadap anak yang sering terjadi membuat banyak pihak sadar betapa rentannya anak menjadi korban kejahatan asusila. Kekerasan seksual terhadap anak akan memberikan dampak atau efek yang berat kepada anak sebagai korban. Di media sosial terdapat grup Facebook (FB bernama Loli Candy's yang mengumpulkan foto porno anak-anak. Pada kasus terungkapnya jaringan pedofilia di Facebook, beberapa media memiliki gaya masing-masing dalam penulisan beritanya. Setiap media sesungguhnya memiliki ideologi yang berbeda mengingat bahwa media bukanlah saluran yang bebas tetapi telah mengonstruksi berita sedemikian rupa. Tujuan penelitian ini adalah untuk melihat bagaimana dua media online yaitu Kompas.com dan Republika Online membingkai pemberitaan tentang pedofilia melalui akun Facebook. Model analisis framing yang digunakan adalah model Robert N. Entman. Perbedaan pembingkaian dalam berita yang dimunculkan oleh Kompas.com dan Republika Online yang paling sering terlihat adalah terletak pada  pemilihan narasumber. Republika Online sebagai media bernuansa Islam selalu memilih narasumber yang memiliki pemikiran Islam.

Remote maintenance in nuclear fuel reprocessing

International Nuclear Information System (INIS)

Herndon, J.N.

1985-01-01

Remote maintenance techniques applied in large-scale nuclear fuel reprocessing plants are reviewed with particular attention to the three major maintenance philosophy groupings: contact, remote crane canyon, and remote/contact. Examples are given, and the relative success of each type is discussed. Probable future directions for large-scale reprocessing plant maintenance are described along with advanced manipulation systems for application in the plants. The remote maintenance development program within the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory is also described. 19 refs., 19 figs

Pembuatan Standard Operating Procedure (SOP Service Desk Berdasarkan Kerangka Kerja Itil V3 dengan Menggunakan Metode Analisis Gap Layanan (Studi Kasus: PT. XYZ , Tangerang

Directory of Open Access Journals (Sweden)

Annisa Rachmi

2014-09-01

Full Text Available Penggunaan Teknologi Informasi di banyak perusahaan telah menjadi satu hal penting dalam meningkatkan efektifitas dan efisiensi operasional bisnis yang mendukung tercapainya tujuan perusahaan, termasuk juga PT XYZ. Unit fungsional service desk sangat dibutuhkan oleh PT XYZ dalam mendukung operasional TI dan menangani permasalahan yang muncul serta memonitor terkait penggunaan TI yang ada di dalam perusahaan. Adanya kebutuhan PT XYZ untuk menjadikan service desk menjadi unit yang dapat berjalan dengan baik sesuai dengan fungsinya, menunjukkan bahwa perlunya penerapan tata kelola TI untuk mengatur dan mengelola aktivitas service desk. Salah satu tata kelola TI yang dimaksud adalah berupa prosedur kerja. Kerangka kerja Information Technology Infrastructure Library (ITIL merupakan suatu best practice yang bertujuan secara berkelanjutan meningkatkan efisiensi operasional TI. Perancangan dan implementasi service desk berdasarkan kerangka kerja ITIL V3 di PT XYZ diperlukan dalam upaya meningkatkan layanan TI dan mengatasi masalah yang ada saat ini. Pembuatan SOP ini diinisialisasi dengan menggunakan metode analisis gap, proses-proses yang dimuat ke dalam SOP merupakan hasil analisis kesenjangan antara kondisi kekinian service desk PT XYZ dengan kondisi ideal service desk framework ITIL.

Maintenance Approaches for Different Production Methods

Directory of Open Access Journals (Sweden)

Mungani, Dzivhuluwani Simon

2013-11-01

Full Text Available Various production methods are used in industry to manufacture or produce a variety of products needed by industry and consumers. The nature of a product determines which production method is most suitable or cost-effective. A continuous process is typically used to produce large volumes of liquids or gases. Batch processing is often used for small volumes, such as pharmaceutical products. This paper discusses a research project to determine the relationship between maintenance approaches and production methods. A survey was done to determine to what extent three maintenance approaches reliability-centred maintenance (RCM, total productive maintenance (TPM, and business-centred maintenance (BCM are used for three different processing methods (continuous process, batch process, and a production line method.

Analisis Keuntungan USAha Ternak Sapi Potong Kelompok USAha Bersama di Desa Sungai Kakap Dusun Cendrawasih Kecamatan Sungai Kakap Kabupaten Kubu Raya

OpenAIRE

Gunawan, Oktavio; Muani, Ani; Maswadi, Maswadi

2013-01-01

Oktavio Gunawan, 2013. Analisis Keuntungan Usaha Ternak Sapi Potong Kelompok Usaha Bersama Di Desa Sungai Kakap Dusun Cendrawasih Kecamatan Sungai Kakap Kabupaten Kubu Raya. Beternak sapi di Desa Sungai Kakap Dusun Cendrawasih merupakan bagian kehidupan bermasyarakat yang telah menyatu secara sosial dan budaya. Sapi digunakan sebagai alat untuk tabungan karena masyarakat di Desa Sungai Kakap Dusun Cendrawasih menjadikan sapi sebagai tabungan dengan cara memelihara sapi tanpa mempunyai rencana...

Improving regulatory oversight of maintenance programs

International Nuclear Information System (INIS)

Cook, S.

2008-01-01

Safe nuclear power plant operation requires that risks due to failure or unavailability of Structures, Systems and Components (SSCs) be minimized. Implementation of an effective maintenance program is a key means for achieving this goal. In its regulatory framework, the important relationship between maintenance and safety is acknowledged by the CNSC. A high level maintenance program requirement is included in the Class I Facilities Regulations. In addition, the operating licence contains a condition based on the principle that the design function and performance of SSCs needs to remain consistent with the plant's design and analysis documents. Nuclear power plant licensees have the primary responsibility for safe operation of their facilities and consequently for implementation of a successful maintenance program. The oversight role of the Canadian Nuclear Safety Commission (CNSC) is to ensure that the licensee carries out that responsibility. The challenge for the CNSC is how to do this consistently and efficiently. Three opportunities for improvement to regulatory maintenance oversight are being pursued. These are related to the regulatory framework, compliance verification inspection activities and monitoring of self-reporting. The regulatory framework has been improved by clarifying expectations through the issuance of S-210 'Maintenance Programs for Nuclear Power Plants'. Inspection activities have been improved by introducing new maintenance inspections into the baseline program. Monitoring is being improved by making better use of self-reported and industry produced maintenance related performance indicators. As with any type of program change, the challenge is to ensure the consistent and optimal application of regulatory activities and resources. This paper is a summary of the CNSC's approach to improving its maintenance oversight strategy. (author)

A probabilistic maintenance model for diesel engines

Science.gov (United States)

Pathirana, Shan; Abeygunawardane, Saranga Kumudu

2018-02-01

In this paper, a probabilistic maintenance model is developed for inspection based preventive maintenance of diesel engines based on the practical model concepts discussed in the literature. Developed model is solved using real data obtained from inspection and maintenance histories of diesel engines and experts' views. Reliability indices and costs were calculated for the present maintenance policy of diesel engines. A sensitivity analysis is conducted to observe the effect of inspection based preventive maintenance on the life cycle cost of diesel engines.

Knowledge engineering thinking of maintenance

International Nuclear Information System (INIS)

2007-01-01

Maintenance optimization problem could not always settled mathematically and was obliged to use quasi-optimum solution with omitting non-formulated limiting condition or neglecting part of optimization object. In such a case knowledge engineering thinking was encouraged. Maintenance of complicated plant and artificial system should be considered from artificial object (equipment/facility hardware and system), technical information and knowledge base, and organizational and human aspect or society and institution. Comprehensive management system in organization and society was necessary not only for assuring integrity of equipment but also for attaining higher performance, reliability and economics of system. For better judgment it was important to share mechanism to make use of more information with organization or whole society. It was required to create database and data mining for knowledge base management system of maintenance. Maintenance was called 'last fortress' to assure quality such as reliability and safety of required function of equipment. Strategic approach to develop maintenance technology under cooperation was considered. Life extension R and D road map was launched in 2005. (T. Tanaka)

ANALISIS COMPARADO SOBRE LA RESPONSABILIDAD SOCIAL EMPRESARIAL EN AMERICA LATINA Y EL ECUADOR

Directory of Open Access Journals (Sweden)

Sofia Lovato

2016-04-01

Full Text Available El presente estudio comparado concibe una serie de reflexiones generales desde la perspectiva social, pobreza para el analisis de la Responsabilidad Social, incorpornado la relacion políticas gubernamentales o estadp y empresa, que facilite la implementacion de la resposabilidad social empresarial en América Latina y el Ecuador como respuesta a la globalizacion considerándose un desafio para la sociedad internacional, los paises de America Latina se encuentra en etapa de confusion debido a que no existe un consenso en q ue consiste la repsonsabilidad social empresarial que permita una adecuada aplicacion de la misma a nivel internacional con el propósito de contribuis al desarrollo socioeconómico de la region mejorando la calidad de v ida de la sociedad.

Maintenance and environmental qualification

International Nuclear Information System (INIS)

Martin, R.S.; Austin, D.G.

1995-01-01

The design of today's nuclear generating plants involves many detailed design considerations. This includes comprehensive look at aging effects on plant components over their expected lifetimes. This is important to ensuring that the plant operates safely throughout its life. The effects of aging are required to be documented in detail in today's designs. This documentation provides assurance that safe operating conditions are maintained throughout the station life cycle. This requirement is analogous to the longer standing requirement to ensure pressure boundary integrity. The pressure boundary integrity requirement has existed in the industry since its inception. The subject of plant aging effects and the maintenance of functionality is known as Environmental Qualification (EQ). This paper will attempt to explain the wisdom of EQ and the potential for optimizing maintenance activities (to move from reactive to proactive activities), within the context of the overall maintenance program. It is the author's intent to encourage the active involvement of maintenance professionals in the effective implementation of the ongoing EQ program so that the benefits are maximized

ANALISIS DIAZINON SECARA DIFERENSIAL PULSA VOLTAMETRI DIBANDINGKAN DENGAN KROMATOGRAFI (Diazinon Analysis with Differential Pulse Voltametry Compared to Chromatography

Directory of Open Access Journals (Sweden)

Pirim Setiarso

2011-07-01

Full Text Available ABSTRAK Telah dilakukan penelitian penentuan diazinon dari sampel tanah pertanian di beberapa kecamatan Kabupaten Nganjuk Jawa Timur menggunakan elektroda kerja tembaga amalgam padat (CuSAE secara diferensial pulsa voltametri (DPV dibandingkan dengan metode kromatografi. 100 g sampel tanah pertanian yang dihaluskan dengan ukuran 100 mesh diekstraksi menggunakan aseton. Ekstraksi dilakukan menggunakan ekstraktror soxhlet dengan 10 kali sirkulasi. Hasil ekstraksi sebagian ditambahkan surfaktan SDS untuk dianalisis secara voltametri menggunakan elektroda CuSAE dan sebagian dianalisis menggunakan kromatografi cair kinerja tinggi (HPLC. Analisis voltametri dilakukan pada pH 3 dengan elektrolit pendukung CaCl 2 menggunakan standar adisi, sedangkan analisis dengan HPLC menggunakan grafik standar. Berdasarkan data voltamogram dan kromatogram yang telah diolah dengan program origin 7.0 menghasilkan perolehan kembali rata-rata diazinon (97.40 ± 1.02 % pada voltametri dan (100.98 ± 7.10 % pada HPLC. Analisis diazinon kedua metode dibandingkan dengan uji t (t hitung = 0.4785 < t tabel = 2.31 sehingga tidak ada perbedaan hasil antara metode voltametri dan HPLC. ABSTRACT The research has been done for determination of diazinon in agricultural soil samples from several districts n Nganjuk, East Java . Solid copper amalgam (CuSAE used  as a working electrode using differential ulse voltammetry (DPV compared with chromatographic method. Around 100 g sample of agricultural soil ith a size 100 mesh was extracted using 100 ml acetone. The extraction was done using extractor oxhlet with 10 times the circulation. A part of the extraction  yield  was  added SDS surfactant for analysis by DPV,  and another part analyzed  by using high performance liquid chromatography (HPLC. Voltammetric analysis carried out at pH 3 with CaCl2 as a supporting electrolyte   using standard addition method, while the analysis by HPLC using calibration curve (standard

ANALISIS RESPON KONSUMEN TERHADAP FAKTOR-FAKTOR MARKETING MIX DALAM PEMBELIAN PRODUKLUWAK WHITE KOFFIE DI PASAR SWALAYAN KOTA SURAKARTA

Directory of Open Access Journals (Sweden)

Yesi Krista Karnasih

2014-10-01

Full Text Available ABSTRAKPenelitian bertujuan untuk mengetahui faktor-faktor marketing mix dan variabel-variabel yang dominan dipertimbangkan konsumen dalam membeli produk Luwak White Koffie instan di pasar swalayan Kota Surakarta serta posisi produk Luwak White Koffie terhadap produk pesaing. Metode dasar dalam penelitian ini adalah deskriptif analitik dengan teknik survei. Penentuan lokasi penelitian dilakukan secara purposive. Metode pengambilan sampel yang digunakan adalah  judgment sampling. Metode analisis data yang digunakan antara lain analisis faktor dan perceptual map. Data yang digunakan adalah data primer dan data sekunder. Hasil analisis faktor menunjukkan bahwa ada 4 faktor yang menjadi pertimbangan konsumen dalam memutuskan pembelian luwak white koffie yaitu faktor produk, faktor aroma dan rasa, faktor tempat, dan faktor promosi. Variabel-variabel yang dominan dipertimbangkan konsumen adalah variabel merek pada faktor produk, variabel rasa pada faktor aroma dan rasa, variabel penataan di swalayan pada faktor tempat dan variabel tampilan iklan pada faktor promosi. Posisi produk Luwak White Koffie instan dibandingkan dengan produk pesaing melalui perceptual map menempati posisi unggul untuk atribut merek, rasa, kecepatan alir, isi pesan iklan, dan tampilan iklan. ABSTRACTThis research aims to determine the marketing mix factors and dominant variables which considered by consumers into buying  instant Luwak White Koffie at supermarket in Surakarta City and Luwak White Koffie product position against competitor products. The basic method in this study was analytical descriptive with survey techniques. Location research determined purposively. The sampling method used was judgment sampling. Data analysis methods used include factor analysis and perceptual map. The data used is primary data and secondary data. The results of factor analysis showed that there are four factors that are considered by consumers to buy products Luwak White Koffie instant

ANALISIS PENGARUH PERUBAHAN EARNINGS DAN RISIKO PASAR TERHADAP STRUKTUR MODAL

Directory of Open Access Journals (Sweden)

Endi Sarwoko

2006-05-01

Full Text Available Penelitian ini bertujuan untuk menguji perbedaan rata-rata struktur modal antar industri, menguji pengaruh perubahan earnings perusahaan terhadap struktur modal, dan menguji pengaruh risiko pasar dengan struktur modal perusahaan. Struktur modal dalam penelitian ini diproksikan dengan debt to equity ratio dan debt to total assets. Data diperoleh dari Pojok Bursa Efek Jakarta (BEJ Universitas Brawijaya, sampel sebanyak 40 perusahaan yang diambil secara Purposive dengan kriteria perusahaan-perusahaan tersebut aktif mencatatkan laporan keuangannya di BEJ dan aktif melakukan perdagangan saham selama 6 tahun terakhir. Hasil analisis menunjukkan bahwa terdapat pengaruh terbalik antara perubahan earnings perusahaan terhadap D/E tetapi perubahan earnings ternyata tidak berpengaruh signifikan terhadap D/A. Risiko pasar tidak berpengaruh signifikan terhadap debt to equity, hasil ini menunjukkan bahwa ketika akan melakukan pembelian saham investor tidak mempertimbangkan risiko pasar. Sedangkan berdasarkan pengaruh terhadap D/A diperoleh hasil risiko pasar berpengaruh signifikan terhadap debt to total assets,  manajemen perusahaan sangat memperhatikan dampak risiko pasar dalam menentukan kebijakan struktur modal perusahaan, karena dalam memberikan pinjaman kreditur biasanya sangat mempertimbangkan aset yang dimiliki perusahaan didanai dari mana, hutang atau modal sendiri.

Optimization and maintenance tests considering multiple failure modes, aging and imperfect maintenance

International Nuclear Information System (INIS)

Martorell, S.; Marton, I.; Sanchez, A.; Carlos, S.

2014-01-01

The paper focuses on the optimization of the test and maintenance intervals under the criteria of unavailability or cost including the effect of the aging of the components and models of imperfect maintenance. The results obtained in the case of application, which focuses on a system of safety of a nuclear power station, show differences, mainly in the outage when you consider the aging. (Author)

Inspection of licensee - Maintenance programme and activities

International Nuclear Information System (INIS)

2013-01-01

An effective maintenance programme is critical to sustained safe and reliable operation of nuclear power plants. The Working Group on Inspection Practices (WGIP) concluded that when a licensee has an effective maintenance programme, the overall operating safety of the plant is improved and the protection of public health and safety enhanced. All Regulatory Bodies (RB) consider maintenance to be an important area for oversight. Although a variety of inspection practices are being used; RB are actively monitoring licensee performance. Specifically the following conclusions were reached and commendable practices identified: - Maintenance oversight by regulators appears to be in a stable continuous improvement state. Most regulators are executing inspection oversight based on an existing regulatory framework. - The performance of a licensee's maintenance programme is recognized as important part of maintaining nuclear safety. The result of the maintenance program assessment is included in the overall performance assessment of a license. - Maintenance inspection activities are recognized as an important part of the regulatory oversight process. Inspection activities are based on the safety significance and nature of work being performed by the licensee. - The effectiveness of the maintenance inspection activities is recognized to rely on properly qualified inspectors; who are adequately supported by specialists. Training and qualification of inspectors should be based on how the RB reviews and inspects licensee maintenance programmes. - Reporting requirements are identified to provide information on the licensees maintenance programme, and to help guide inspection activities. - Performance Indicators are recognized as a useful tool for helping focus regulatory activities. Basic PI are identified and tracked by the RB, and use of PI by the licensee is monitored. - Inspections are designed to confirm that the licensee is planning and scheduling maintenance with due

Reliability centered maintenance streamlining through lessons learned

International Nuclear Information System (INIS)

Strong, D.K.

1991-01-01

In late 1986, PSE and G concluded that the Nuclear Department would develop a consistent approach to maintenance at Artificial Island (Salem and Hope Creak nuclear units). Preventive maintenance (PM) would be the heart of this approach. In the last six months of 1987 departments affected by the maintenance program participated on working groups that developed the Artificial Island maintenance philosophy. The central theme of the maintenance philosophy is the RCM (reliability centered maintenance) process. A pilot project tested the process in 1988. In 1989 the Central PM Group formed and in 1990 was given responsibility and authority to analyze, approve, implement, and control PM program changes. RCM is the central theme of the PM improvement effort but not the whole effort. Other important pieces included in this paper are: development of a common PM program, improvement of work instructions, development of predictive maintenance techniques into programs, development of a PM basis database, development of PM feedback from failure trends, root cause analysis, maintenance performance indicators, technicians, and engineers

Using heuristic search for optimizing maintenance plans

International Nuclear Information System (INIS)

Mutanen, Teemu

2012-01-01

This work addresses the maintenance action selection process. Maintenance personnel need to evaluate maintenance actions and costs to keep the machines in working condition. Group of actions are evaluated together as maintenance plans. The maintenance plans as output provide information to the user about which actions to take if any and what future actions should be prepared for. The heuristic search method is implemented as part of general use toolbox for analysis of measurements from movable work machines. Impacts from machine's usage restrictions and maintenance activities are analysed. The results show that once put on a temporal perspective, the prioritized order of the actions is different and provide additional information to the user.

ANALISIS POTENSI RETRIBUSI PELAYANAN PASAR DI KABUPATEN KENDAL

Directory of Open Access Journals (Sweden)

Herru Dwi Haryono

2017-06-01

Full Text Available Selama periode 2008-2012, realisasi retribusi pelayanan pasar ini mengalami tren naik turun. Sedangkan dari target yang ditentukan dalam komponen retribusi pelayanan pasar yakni retribusi pasar, retribusi sampah/kebersihan dan retribusi sewa kios rata-rata selalu terealisasi melebihi target. Penelitian ini bertujuan untuk mengetahui potensi retribusi pelayanan pasar di Kabupaten Kendal dan apakah target yang ditentukan sudah berdasarkan potensi yang ada. Data yang digunakan dalam penelitian ini adalah data sekunder. Data sekunder dalam penelitian ini berupa data yang bersumber dari BPS Kabupaten Kendal, DPPKAD    Kabupaten Kendal, Disperindag  Kabupaten  Kendal dan  UPTD Dinas  Pasar Kabupaten  Kendal.  Metode analisis yang digunakan yakni analisis deskriptif yakni menghitung potensi retribusi pelayanan pasar di Kabupaten Kendal dan membandingkan potensi dengan target dan apakah target yang ditentukan sesuai berdasarkan potensi yang ada. Hasil penelitian menunjukkan bahwa (1 potensi retribusi pelayanan pasar di Kabupaten Kendal sebesar Rp.5.130.789.600 pertahun. (2 target retribusi pelayanan pasar di Kabupaten Kendal selalu berada dibawah potensi yang ada, jadi kesimpulannya bahwa mekanisme penentuan target tidak berdasarkan potensi yang ada. Berdasarkan hasil anasilis data tersebut, saran yang dapat disampaikan adalah agar pemerintah daerah ataupun pengelola pasar dapat memanfaatkan secara maksimal potensi yang ada agar realisasi penerimaan retribusi pelayanan pasar dapat ditingkatkan lagi dan hendaknya mengevaluasi mekanisme penetapan target berdasarkan potensi yang ada agar kinerja pemerintah maupun pengelola pasar dapat ditingkatkan lagi yang akan berdampak pada realisasi penerimaan retribusi pelayanan pasar. During the period 2008-2012, the actual levy of service this market has been trending up and down. While the targets specified in the component market services levy market fees, garbage fees / levies hygiene and the average

Advantages of condition-based maintenance approach

International Nuclear Information System (INIS)

Bareiss, J.; Roos, E.; Jovanovic, A.; Perunicic, M.; Balos, D.

2004-01-01

Pilot applications in EnBW steam boiler components and high-pressure pipe systems in the context of the European research project RIMAP (''Risk Based Inspection and Maintenance Procedures for European Industry'') showed that application of a risk-based maintenance strategy (e.g. RIMAP) will make the decision process more transparent and enable better condition-oriented maintenance. With regard to life management of the systems (availability, product quality), this appears to be more important than than the aspect of cost reduction in the maintenance sector, although the latter may not be unwelcome. (orig.) [de

Buildings Lean Maintenance Implementation Model

Science.gov (United States)

Abreu, Antonio; Calado, João; Requeijo, José

2016-11-01

Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

On-Line Maintenance Methodology Development

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo Won; Kim, Jae Ho; Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of)

2012-05-15

Most of domestic maintenance activities for nuclear power plants are performed while overhaul. Therefore, On-Line Maintenance (OLM) is one of the proper risks informed application techniques for diffusing maintenance burden during overhaul with safety of the plant is secured. The NUMARC 93-01 (Rev.3) presents the OLM state of the art and it provides methodology. This study adopts NUMARC 93-01 (Rev.3) and present OLM. The reference component is Emergency Diesel Generator (EDG) of Ulchin 3, 4

Implementation of maintenance rule for structures

International Nuclear Information System (INIS)

Ashar, H.; Bagchi, G.

1999-01-01

The maintenance rule, 10 CFR 50.65, 'Requirements for Monitoring the Effectiveness of Maintenance at Nuclear Power Plants', was published by the Nuclear Regulatory Commission (NRC) in the Federal Register (56 FR 31324) on July 10, 1991. The rule became effective on July 10, 1996, giving nuclear power plant licensees 5 years to implement it. During 1994-1995, NRC staff visited nine nuclear power plant sites to observe licensees' preparations for implementation of the rule. The teams found that most of the licensees had not established goals, or performance criteria for monitoring structures at their sites. The licensees contended that the structures were inherently reliable and required no monitoring under the maintenance rule. On the basis of earlier site visits performed by NRC staff to assess the condition of structures, the NRC staff could not accept this contention, and clarified its position in Revision 1 of Regulatory Guide 1.160, 'Monitoring the Effectiveness of Maintenance at Nuclear Power Plants'. This paper discusses the applicability of the maintenance rule criteria for structures and its usefulness in ensuring that the structures, systems, and components within the scope of the maintenance rule are capable of fulfilling their intended functions. Also discussed are the aspects of maintenance rule efforts that could be useful for license renewal applications. (orig.)

Environmental favourable foundries through maintenance activities

Directory of Open Access Journals (Sweden)

A. Saniuk

2015-10-01

Full Text Available Maintenance today contributes to the aim of sustainable development in society, including environmental and energy saving, safety and economical aspects. The main purpose of the paper is to present the role of maintenance in the realization of sustainable developing practices in a foundry industry. Maintenance offers numerous opportunities to reduce the influence of foundry processes on the natural environment and utilize resources more efficiently. Maintenance activities can help to reduce losses and thereby improve the efficiency of the processes used in the production of resources (e.g. raw materials, energy, etc., especially in areas such as: the choice of an appropriate strategy for the maintenance of machinery and equipment (e.g. reactive, preventive, proactive; inventory management of spare parts; lubrication management and management of technology media.

ANALISIS PENGARUH KUALITAS FINANSIAL PERUSAHAAN, KUALITAS AUDITOR DAN KUALITAS PEREKONOMIAN TERHADAP OPINI AUDIT (GOING CONCERN

Directory of Open Access Journals (Sweden)

Baqarina Hadori

2014-04-01

Full Text Available Abstrak: Analisis Pengaruh Kualitas Finansial Perusahaan, Kualitas Auditor, Dan Kualitas Perekonomian Terhadap Opini Audit (Going Concern. Penelitian ini bertujuan untuk menguji pengaruh faktor keuangan dan faktor non-keuangan terhadap pemberian opini audit going concern oleh auditor. Faktor keuangan yang diuji adalah profitabilitas, likuiditas, solvabilitas, pertumbuhan penjualan tahunan, dan pertumbuhan harga saham. Sedangkan faktor non-keuangan yang diuji adalah kualitas auditor dan kualitas perekonomian. Penelitian ini menggunakan 109 sampel laporan keuangan auditan perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia pada tahun 2008-2012 yang dipilih secara acak. Analisis regresi logistik menunjukkan bahwa solvabilitas, pertumbuhan penjualan tahunan, dan pertumbuhan harga saham tahunan berpengaruh terhadap opini audit going concern. Sedangkan profitabilitas, likuiditas, kualitas auditor, dan kualitas perekonomian tidak berpengaruh terhadap opini audit going concern.   Kata kunci: kualitas finansial perusahaan; kualitas auditor, kualitas perekonomian, opini audit going concern.   Abstract: Effect of Corporate Financial Analysis Quality, Quality Auditor, and Quality Audit Opinion on Economy (Going Concern. The research described in this paper was designed to empirically examine the effects of financial quality of a company, auditor quality, and quality of the relevant economy on going concern audit opinion. Financial quality is measured by profitability, liquidity, solvability, annual sales growth, and growth in stock market price. Logistic regression was used to test the hypothesis with 109 sample of manufacturing companies listed on the Indonesia Stock Exchange in 2008-2012. The results indicated that solvability, annual sales growth, and growth in stock market price do significantly affect going concern audit opinion. On the other hand, profitability, liquidity, auditor quality, and quality of the economy do not significantly

ANALISIS SEWA MENYEWA PARALEL PADA PERUSAHAAN RENT CAR CV. HARKAT DALAM PERSPEKTIF EKONOMI ISLAM

Directory of Open Access Journals (Sweden)

Samsuardi Samsuardi

2013-12-01

Full Text Available This study aims at determining the parallel process of car rental agreement between Harkat Rent Car Company and the owner of the car, and between the company and its customers in an Islamic economics perspective. This study also aims to analyze the risk coverage of the leased car. The data for this study was gathered through interviews, observation and documentation studies. The collected data was then analyzed using descriptive analysis method. Results showed that the process of car leasing begin when customer rented a car from CV. Harkat which was owned by its partner. The company provided a shared price for car owners according to a mutual agreement and applied only for a certain period. Furthermore, the partner has to allocate 20 percent of the income for the company. In addition, the company also required the partner to cover for maintenance costs, insurance, equipment, and spare parts. In the context of Islamic economics, the practice of leasing parallel conducted by the company was not fully Shariah compliance due to practice a lease above a lease and using two contracts in one transaction. =========================================== Penelitian ini bertujuan untuk mengetahui perjanjian sewa menyewa mobil secara paralel antara Perusahaan Rent Car CV. Harkat dengan pemilik mobil dan dengan konsumennya dalam perspektif ekonomi Islam. Penelitian ini juga bertujuan untuk menanganalisis pertanggungan resiko terhadap mobil yang dijadikan objek sewa menyewa tersebut sewa menyewa mobil di Perusahaan Rent Car CV. Data untuk penelitian ini bersumber dari wawancara, obesrvasi dan studi dokumentasi. Metode yang digunakan dalam penelitian ini adalah deskriptif analisis. Hasil penelitian menunjukkan bahwa CV. Harkat menyewakan mobil milik mitra kerjanya (pemilik mobil kepada pelanggan yang membutuhkan sewa mobil untuk keperluannya. Pemilik usaha memberikan harga kongsi kepada pemilik mobil sesuai dengan kesepakatan bersama dan untuk jangka waktu

Evaluations of maintenance effectiveness on unavailability and risk

International Nuclear Information System (INIS)

Vesely, W.E.

1993-01-01

A methodology is presented for quantifying the effectiveness of maintenance on unavailability and on risk. The methodology is based on standard Markov modeling principles. What is new is the application to quantify maintenance effectiveness by explicitly quantifying maintenance benefits as well as maintenance's negative contributions. Maintenance effects are quantified by defining a degraded state for the component in addition to an operational state and a failed state which are usually defined. The maintenance model which is developed is a natural extension of the standard models used in reliability analysis and in Probabilistic Risk Assessments (PRAs). The results which are obtained can be directly used in PRAs. Applications of the methodology are presented by quantifying maintenance effectiveness on component performance and component unavailability for specific maintenance schedules

Prevalence of operator fatigue in winter maintenance operations.

Science.gov (United States)

Camden, Matthew C; Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Bryce, James; Flintsch, Gerardo; Hanowski, Richard J

2018-02-02

Similar to commercial motor vehicle drivers, winter maintenance operators are likely to be at an increased risk of becoming fatigued while driving due to long, inconsistent shifts, environmental stressors, and limited opportunities for sleep. Despite this risk, there is little research concerning the prevalence of winter maintenance operator fatigue during winter emergencies. The purpose of this research was to investigate the prevalence, sources, and countermeasures of fatigue in winter maintenance operations. Questionnaires from 1043 winter maintenance operators and 453 managers were received from 29 Clear Road member states. Results confirmed that fatigue was prevalent in winter maintenance operations. Over 70% of the operators and managers believed that fatigue has a moderate to significant impact on winter maintenance operations. Approximately 75% of winter maintenance operators reported to at least sometimes drive while fatigued, and 96% of managers believed their winter maintenance operators drove while fatigued at least some of the time. Furthermore, winter maintenance operators and managers identified fatigue countermeasures and sources of fatigue related to winter maintenance equipment. However, the countermeasures believed to be the most effective at reducing fatigue during winter emergencies (i.e., naps) were underutilized. For example, winter maintenance operators reported to never use naps to eliminate fatigue. These results indicated winter maintenance operations are impacted by operator fatigue. These results support the increased need for research and effective countermeasures targeting winter maintenance operator fatigue. Copyright © 2018 Elsevier Ltd. All rights reserved.

Fast Flux Test Facility (FFTF) maintenance provisions

International Nuclear Information System (INIS)

Marshall, J.L.

1981-05-01

The Fast Flux Test Facility (FFTF) was designed with maintainability as a primary parameter, and facilities and provisions were designed into the plant to accommodate the maintenance function. This paper describes the FFTF and its systems. Special maintenance equipment and facilities for performing maintenance on radioactive components are discussed. Maintenance provisions designed into the plant to enhance maintainability are also described

Optimum policies for a system with general imperfect maintenance

International Nuclear Information System (INIS)

Sheu, S.-H.; Lin, Y.-B.; Liao, G.-L.

2006-01-01

This study considers periodic preventive maintenance policies, which maximizes the availability of a repairable system with major repair at failure. Three types of preventive maintenance are performed, namely: imperfect preventive maintenance (IPM), perfect preventive maintenance (PPM) and failed preventive maintenance (FPM). The probability that preventive maintenance is perfect depends on the number of imperfect maintenances conducted since the previous renewal cycle, and the probability that preventive maintenance remains imperfect is not increasing. The optimum preventive maintenance time that maximizes availability is derived. Various special cases are considered. A numerical example is given

An experimental maintenance management system.

Science.gov (United States)

1979-01-01

The purpose of this study was to evaluate Virginia's maintenance management system and to recommend modifications directed at improving it. The study revealed that (1) the current system of allocating maintenance monies is based upon centerline milea...

Susquehanna SES maintenance supervisor training and certification

International Nuclear Information System (INIS)

Deckman, M.

1991-01-01

Susquehanna's program targets all Supervisors, Supervisor Candidates, and Temporary Supervisors that are responsible for in-plant maintenance or maintenance support activities, including: mechanical maintenance; electrical maintenance; maintenance support (labor support, radwaste, etc.); mobile construction support (mechanical and electrical); chemistry; health physics; maintenance planning; and instrument and controls. The program integrates the three major areas of direct Supervisory responsibilities: (1) Leadership and Management - Skills that require interpersonal activities that are typically humanistic and subjective; such as coaching, motivating, communications, etc. (2) Technical and Administrative - Knowledge that is directly related to the job of Supervising from the production, regulatory, accountability perspective. These topics are very objective and include training on topics such as workpackages, plant chemistry parameters, radiological concerns, etc. (3) Technical Skills - Ensure each Supervisor is technically competent in the plant systems, components, or equipment he/she is tasked with maintaining or overseeing. Typical skills found in this area are, circuit breaker maintenance, primary system sampling, or overhauling pumps

A VITAL service for predictive MOV maintenance

International Nuclear Information System (INIS)

Anon.

1990-01-01

Motor-operated valve (MOV) maintenance can be a major contributor to unplanned plant downtime, either because valve malfunctions cause unscheduled outages, or because unnecessary valve maintenance lengthens scheduled outages. The cause of both situations is a preventive approach to valve maintenance, where maintenance is scheduled according to a timetable instead of according to a demonstrated need. To move towards a predictive maintenance approach, inexpensive methods of collecting and diagnosing real-time data on the conditions of a valve must be made available. Such a system must be capable of detecting and diagnosing degrading mechanical and electrical behaviour at an early stage, as well as being able to predict the time of failure. Without this data, a predictive approach to maintenance is impossible. Westinghouse is addressing the requirements for a predictive approach to MOV maintenance with the introduction of a third-generation of diagnostic systems for motor-operated valves -the portable Valve Intelligent Test and Analysis System (VITALS) and the on-line Valve Monitoring System (VMS). (author)

Proactive maintenance initiatives at Argonne National Laboratory-West

International Nuclear Information System (INIS)

Duckwitz, N.R.; Duncan, L.W.; Whipple, J.J.

1995-01-01

In the late 1980's, ANL-W Management foresaw a need to provide dedicated technical support for maintenance supervisors. Maintenance supervisors were facing increased challenges to ensure all environmental, safety, and waste management regulations were followed in daily maintenance activities. This increased burden was diverting supervisory time away from on-the-job supervision. Supervisors were finding less time for their ''mentor'' roles to ensure maintenance focused on finding and correcting root causes. Additionally the traditional maintenance organization could not keep up with the explosion in predictive maintenance technologies. As a result, engineers were tasked to provide direct technical support to the maintenance organization. Today the maintenance technical support group consists of two mechanical engineers, two electrical engineers and an I ampersand C engineer. The group provides a readily available, quick response resource for crafts people and their supervisors. They can and frequently do ask the support group for help to determine the root cause and to effect permanent fixes. Crafts and engineers work together informally to make an effective maintenance team. In addition to day-to-day problem solving, the technical support group has established several maintenance improvement programs for the site. This includes vibration analysis of rotating machinery, testing of fuel for emergency diesel generators, improving techniques for testing of high efficiency particulate air (HEPA) filters, and capacity testing of UPS and emergency diesel starting batteries. These programs have increased equipment reliability, reduced conventional routine maintenance, reduced unexpected maintenance, and improved testing accuracy. This paper will discuss the interaction of the technical support group within the maintenance department. Additionally the maintenance improvement programs will be presented along with actual cases encountered, the resolutions and lessons learned

Analisis Cadangan Devisa Indonesia

Directory of Open Access Journals (Sweden)

Lusia Bunga Uli

2016-09-01

Full Text Available Abstract This study aims to determine the relationship between variables export, import, and exchange rate against Foreign Exchange Reserves in Indonesia. The data used in the empirical study of a sequence of data monthly time of year 2011.01 through 2014.12 from Bank Indonesia and the Central Statistics Agency (BPS. The analysis tool used is Auto Regression Vector Model (VAR. The results of this study indicate that the one-way relationship between the variables of foreign reserves and export. Then one-way relationship between exchange rate and exports. Lastly, there is a two-way relationship between imports and foreign exchange reserves, two-way relationship between exchange rate and foreign exchange reserves, two-way relationship between imports and exports, two-way relationship between the exchange rate and imports. The results also showed foreign exchange reserves are significantly influenced by the movement itself at a probability of 1 %. Export variable negative and not significantly affect the foreign exchange reserves. While imports of positive and not significant to the foreign exchange reserves. Foreign Exchange Reserves Indonesia is positively influenced by the exchange rate and not significant. Keywords: Foreign exchange reserves, exports, imports, exchange rate   Abstrak. Penelitian ini bertujuan untuk mengetahui seberapa keterkaitan antar variabel ekspor, impor, dan nilai tukar rupiah terhadap Cadangan Devisa Indonesia. Data yang digunakan dalam kajian empiris ini merupakan data runtutaan waktu bulanan dari tahun 2011.01 sampai 2014. 12 yang berasal dari Bank Indonesia dan Badan Pusat Statistik (BPS. Alat analisis yang digunakan yaitu Vector Autoregression Model (VAR. Hasil dari penelitian ini menunjukkan bahwa hubungan searah antara variabel cadangan devisa ke ekspor. Lalu hubungan searah antara kurs terhadap ekspor Terakhir, terdapat hubungan dua arah antara impor dan cadangan devisa, hubungan dua arah antara kurs dan cadangan

Maintenance proficiency evaluation test bank

International Nuclear Information System (INIS)

Maier, Loran

2003-01-01

The Maintenance Proficiency Evaluation Test Bank (MPETB) is an Electric Power Research Institute- (EPRJ-) operated, utility-sponsored means of developing, maintaining, and disseminating secure, high-quality written and performance maintenance proficiency tests. EPRTs charter is to ensure that all tests and test items that go into the Test Bank have been validated, screened for reliability, and evaluated to high standards of psychometric excellence. Proficiency tests of maintenance personnel.(mechanics, electricians, and instrumentation and control [I and C] technicians) are most often used to determine if an experienced employee is capable of performing maintenance tasks without further training. Such tests provide objective evidence for decisions to exempt an employee from what, for the employee, is unnecessary training. This leads to considerable savings in training costs and increased productivity because supervisors can assign personnel to tasks at which their competence is proven. The ultimate objective of proficiency evaluation is to ensure that qualified maintenance personnel are available to meet the maintenance requirements of the plant Numerous task-specific MPE tests (both written and performance) have been developed and validated using the EPRI MPE methodology by the utilities participating in the MPETB project A task-specific MPE consists of a multiple-choice written examination and a multi-step performance evaluation that can be used to assess an individual's present knowledge and skill level for a given maintenance task. The MPETB contains MPEs and test items for the mechanical, electrical, and I and C classifications that are readily available to participating utilities. Presently, utilities are placing emphasis on developing MPEs to evaluate outage-related maintenance tasks that demonstrate the competency and qualifications of plant and contractor personnel before the start of outage work. Utilities are also using the MPE methodology and process to

Dynamic analysis of piping with multiple damping mechanisms; Analisis dinamico de tuberias con multiples mecanismos de amortiguamiento

Energy Technology Data Exchange (ETDEWEB)

Ruiz Lopez, Pablo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1990-12-31

This paper describes a damping criterion that allows realizing in a more convenient form the dynamic analysis of piping and structures in general, subjected to independent stimulations, fabricated in different materials and/or damping devices. This criterion, named composed damping, is applicable to the method of modal superimposition. [Espanol] En este trabajo se describe un criterio de amortiguamiento que permite realizar en una forma mas conveniente el analisis dinamico de tuberias y estructuras en general, sujetas a excitaciones independientes, compuestas de diferentes materiales y/o mecanismos de amortiguamiento. Este criterio, denominado amortiguamiento compuesto, es aplicable en el metodo de superposicion modal.

Dynamic analysis of piping with multiple damping mechanisms; Analisis dinamico de tuberias con multiples mecanismos de amortiguamiento

Energy Technology Data Exchange (ETDEWEB)

Ruiz Lopez, Pablo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1989-12-31

This paper describes a damping criterion that allows realizing in a more convenient form the dynamic analysis of piping and structures in general, subjected to independent stimulations, fabricated in different materials and/or damping devices. This criterion, named composed damping, is applicable to the method of modal superimposition. [Espanol] En este trabajo se describe un criterio de amortiguamiento que permite realizar en una forma mas conveniente el analisis dinamico de tuberias y estructuras en general, sujetas a excitaciones independientes, compuestas de diferentes materiales y/o mecanismos de amortiguamiento. Este criterio, denominado amortiguamiento compuesto, es aplicable en el metodo de superposicion modal.

MOSEG code for safety oriented maintenance management Safety of management of maintenance oriented by MOSEG code

International Nuclear Information System (INIS)

Torres Valle, Antonio

2005-01-01

Full text: One of the main reasons that makes maintenance contribute highly when facing safety problems and facilities availability is the lack of maintenance management systems to solve these fields in a balanced way. Their main setbacks are shown in this paper. It briefly describes the development of an integrating algorithm for a safety and availability-oriented maintenance management by virtue of the MOSEG Win 1.0 code. (author)

Environmental analysis applied to schools. Methodologies for data acquisition; Analisi ambientale iniziale per gli istituti d'istruzione. Metodologia per l'acquisizione dei dati

Energy Technology Data Exchange (ETDEWEB)

Andriola, L.; Ceccacci, R. [ENEA, Div. Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, Rome (Italy)

2001-07-01

The environment analysis is the basis of environmental management for organizations and it is considered as the first step in EMAS. It allows to identify, deal with the issues and have a clear knowledge on environmental performances of organizations. Schools can be included in the organizations. Nevertheless, the complexity of environmental issues and applicable regulations makes very difficult for a school, that wants to implement an environmental management system (EMAS, ISO 14001, etc.), to face this first step. So, it has been defined an instrument, that is easy but complete and coherent with reference standard, to let schools choose their process for elaborating the initial environmental revue. This instrument consists, essentially, in cards that, if completed, facilitate the drafting of the environmental analysis report. [Italian] L'analisi ambientale iniziale costituisce il presupposto di qualsiasi azione di gestione ambientale da parte di un'organizzazione ed e' esplicitamente prevista, come prima tappa, in EMAS. Essa consente infatti di individuare ed approfondire le problematiche ambientali e di fotografare, per mezzo di riferimenti oggettivi, le prestazioni ambientali di un'organizzazione, e quindi anche di una scuola, in modo da poter stabilire e controllare nel tempo gli obiettivi di miglioramento. Tuttavia la complessita' delle problematiche ambientali e delle relative normative di riferimento rende estremamente difficoltoso, per un istituto scolastico che intenda intraprendere un percorso di gestione ambientale comunque finalizzato (EMAS, ISO 14001, Comunicazione ambientale, ecc.) compiere questo passo iniziale. E' stato pertanto realizzato uno strumento semplificato, ma comunque completo e coerente con gli standard di riferimento, per consentire alle scuole di effettuare il percorso di elaborazione di un'analisi ambientale iniziale. Lo strumento consiste essenzialmente in schede che, una volta compilate

Analisis Aplikasi Konsep Gaya dalam Fisika yang Berkaitan dengan Bidang Biologi

Directory of Open Access Journals (Sweden)

Toto Toto

2017-06-01

mempermudah mahasiswa dalam menguasai dan menyukai mata kuliah fisika. Dalam penelitian ini dilakukan studi dokumentasi terhadap buku biologi pada mata kuliah Biologi Umum pada semester 1. Berdasarkan analisis terdapat aplikasi konsep gaya dalam materi mata kuliah Biologi Umum yaitu : gaya kapilaritas pada xilem dan floem; gaya pada jaringan otot; dan gaya peristaltik makanan. Hasil studi ini bermanfaat sebagai dasar pijakan dalam penyusunan bahan ajar fisika yang berorientasi ilmu hayati, sehingga mahasiswa biologi diharapkan tertarik terhadap fisika. Sebagai rekomendasi bahwa analisis aplikasi konsep dan prinsip fisika dalam biologi mesti dilakukan secara berkesimbungan. Kata kunci: Aplikasi konsep gaya.

Maintenance of radiation monitoring systems

International Nuclear Information System (INIS)

Aoyama, Kei

2001-01-01

As the safety and quality of atomic power facilities are more strongly required, the reliability improvement and preventive maintenance of radiation monitoring systems are important. This paper describes the maintenance of radiation monitoring systems delivered by Fuji Electric and the present status of preventive maintenance technology. Also it introduces the case that we developed a fault diagnosis function adopting a statistics technique and artificial intelligence (AI) and delivered a radiation monitoring system including this function. This system can output a fault analysis result and a countermeasure from the computer in real time. (author)

Remote handling maintenance of ITER

International Nuclear Information System (INIS)

Haange, R.

1999-01-01

The remote maintenance strategy and the associated component design of the International Thermonuclear Experimental Reactor (ITER) have reached a high degree of completeness, especially with respect to those components that are expected to require frequent or occasional remote maintenance. Large-scale test stands, to demonstrate the principle feasibility of the remote maintenance procedures and to develop the required equipment and tools, were operational at the end of the Engineering Design Activities (EDA) phase. The initial results are highly encouraging: major remote equipment deployment and component replacement operations have been successfully demonstrated. (author)

ANALISIS KADAR LOGAM DAN CARA MUDAH MENGENALI UDANG YANG TERAKUMULASI LOGAM: STUDI KASUS TENTANG UDANG DI SUNGAI DONAN CILACAP, JAWA TENGAH (Metal Content Analysis and Easily Recognize for Shrimps that Accumulates of Metal: Case Study about Shrimps

Directory of Open Access Journals (Sweden)

Tumisem Tumisem

2011-07-01

Full Text Available ABSTRAK Penelitian tentang Analisis Kadar Logam dan Cara Mudah Mengenali Berbagai Udang yang Terakumulasi Logam dilakukan dengan: mengidentifikasi berbagai jenis udang, menganalisis kadar logam dan menganalisis secara morfologi berbagai jenis udang terkait dengan morfologi tubuhnya. Penelitian dilakukan di sepanjang Sungai Donan Cilacap dengan cara menangkap berbagai jenis udang di sepanjang sungai tersebut setiap musim. Analisis kadar logam dilakukan di Laboratorium Kimia Analitik UGM, identifikasi dan analisis morfologi udang dilakukan di Laboratorium Teknik Kimia UMP. Hasil identifikasi diperoleh enam jenis udang yaitu udang Tepus, Pletok, Jahe, Peci, Sikat, dan Wuku. Berdasarkan hasil analisis morfologi (warna tubuh menunjukkan semua jenis udang yang berasal dari lokasi sekitar tailing semen dan pertamina berwarna lebih gelap (kehitaman atau hitam kemerahan, dan yang berasal dari lokasi sungai yang memiliki tanaman bakau adalah cerah dan segar (warna lebih kelihatan bening. Hasil analisis kadar logam jenis Cd dan Pb pada semua udang tidak terdeteksi, sedangkan analisis kadar Cu terdeteksi pada udang Pletok, Wuku dan Sikat dengan kadar melebihi baku mutu kesehatan 0,1 ppm. Rata-rata kadar Cu pada udang tersebut sebesar 66,256 ppm per 1000 gram udang kering. Dari hasil analisis morfologi (bentuk tubuh dari semua jenis udang baik yang terakumulasi logam maupun tidak memiliki bentuk yang sama, sehingga tidak dapat menjadi patokan dalam mengenali udang yang tercemar logam. Berdasarkan penelitian di atas dapat disimpulkan udang yang terakumulasi bahan pencemar di atas standar keamanan pangan berwarna hijau kehitaman dan merah kehitaman, sedangkan udang yang tidak terakumulasi bahan pencemar berwarna putih segar. ABSTRACT Research on the metal content analysis and Easily Recognize for shrimps that accumulates of metal have done by identify various types of shrimps, metal content analysis, and analyzed morphologically various types of shrimp related

Increasing the competitiveness of maintenance contract rates by using an alternative methodology for the calculation of average vehicle maintenance costs

Directory of Open Access Journals (Sweden)

Stephen Carstens

2008-11-01

Full Text Available Companies tend to outsource transport to fleet management companies to increase efficiencies if transport is a non-core activity. The provision of fleet management services on contract introduces a certain amount of financial risk to the fleet management company, specifically fixed rate maintenance contracts. The quoted rate needs to be sufficient and also competitive in the market. Currently the quoted maintenance rates are based on the maintenance specifications of the manufacturer and the risk management approach of the fleet management company. This is usually reflected in a contingency that is included in the quoted maintenance rate. An alternative methodology for calculating the average maintenance cost for a vehicle fleet is proposed based on the actual maintenance expenditures of the vehicles and accepted statistical techniques. The proposed methodology results in accurate estimates (and associated confidence limits of the true average maintenance cost and can beused as a basis for the maintenance quote.

ANALISIS SISTEM PENGEMBANGAN KAWASAN INDUSTRI TERPADU BERWAWASAN LINGKUNGAN: STUDI KASUS DI PT. KAWASAN INDUSTRI MEDAN (Analysis System of Integrated Industrial Estate Ecodevelopment Case Study: At PT. Medan Industrial Estate

Directory of Open Access Journals (Sweden)

Kimberly Febrina Kodrat

2011-07-01

Full Text Available ABSTRAK Tujuan utama penelitian adalah menganalisis kinerja pengembangan kawasan industri terpadu berwawasan lingkungan. Cakupan aspek penelitian disinkronkan dengan konsep pembangunan berkelanjutan sekaligus dijadikan sebagai batasan kajian, yakni mempersekutukan aspek ekonomi, ekologi dan sosial. Data diperoleh dengan menggunakan metode survei melalui observasi, wawancara mendalam, dan pendapat pakar. Metodologi penelitian menggunakan metode survei dengan menggunakan perpaduan antara hard system (analisis sistem dinamis dan soft system (analisis prospektif. Dari hasil uji statistik chi square (α = 0,01 diperoleh bahwa kelompok masyarakat yang bekerja di dalam PT. KIM mempunyai hubungan yang sangat signifikan dengan kelompok masyarakat yang bekerja di luat PT. KIM terhadap tingkat pendapatan, tingkat pendidikan dan faktor usia. Berdasarkan hasil analisis kualitas limbah cair unit IPAL PT. KIM terdapat 5 parameter yang masih berada diatas nilai baku mutu KepMenLHNo.51/1997, yaitu: BOD, COD, TSS, klorida dan amoniak. Tingkat efisiensi pengolahan limbah cair unit IPAL PT. KIM rata-rata 53,07%. Hasil analisis ketergantungan antar faktor dengan menggunakan Analisis Prospektif diperoleh sebanyak 5 faktor strategis masa depan yang mempengaruhi pengembangan kawasan industri terpadu berwawasan lingkungan, yaitu: jumlah industri, permintaan lahan, kebijakan pemerintah, model pengembangan, dan iklim investasi yang kondusif. Pengembangan kawasan industri terpadu berwawasan lingkungan dapat dilakukan dengan strategi moderat dengan kebijakan mencakup jumlah industri bertambah secara bertahap dengan meningkatnya permintaan lahan serta kebijakan pemerintah yang memfasilitasi peningkatan modal pengembangan dan didukung oleh iklim investasi yang kondusif. ABSTRACT The main purpose of the research is to study environmental aspect of industrial estate development. The scope of the research aspects is synchronized with sustainable development concepts, namely

Analisis Karaterisasi Konsentrasi dan Komposisi Partikulat Udara (Studi Case : Surabaya

Directory of Open Access Journals (Sweden)

Eka Fithriani Ahmad

2016-12-01

Full Text Available Abstrak Pencemaran udara merupakan dampak yang sangat merugikan, tidak hanya bagi manusia tetapi juga akan berdampak buruk bagi ekosistem hewan dan tumbuhan. Pada penelitian ini akan mengkaji pencemaran udara dari Oktober 2012 hingga Februari 2014 melalui penelitian konsentrasi dan komposisi dari partikulat udara dengan ukuran PM 2.5. Penelitian ini bertujuan untuk menentuan sumber asal pencemaran di Surabaya sehingga dapat dijadikan referensi berbasis ilmiah sebagai langkah untuk membuat keputusan dan kebijakan yang tepat dalam menanggulangi dampak pencemaran. Metode pengolahan data dalam penelitian ini adalah dengan menggunakan analisis reseptor modeling yaitu Positif Matrix Factorization (PMF untuk mengetahui sumber asal pencemaran. Hasil pengukuran yang diperoleh pada konsentrasi PM 2,5 adalah 15.05 μg/m3 sehingga telah melebihi baku mutu tahunan yang telah ditetapkan PP 41 tahun 1999, USEPA, maupun WHO. Dalam partikulat terdapat konsentrasi black carbon (BC sebesar 3.20 μg/m3 dan unsur Pb dengan konsentrasi 0.28 μg/m3 yang telah melebihi nilai baku mutu USEPA. Sedangkan hasil analisis reseptor modeling di dapatkan sumber asal polutan berasal dari biomass, vehicle, soil, industri Pb, industri Zn dan indutri Fe. Kata kunci: Partikulat mater 2.5, black carbon, Pb, positive matrix factorization, Surabaya   Abstract Air pollution is a very adverse impact, not only for humans but also the ecosystem of plants and animals. This research examine air pollution from October 2012 until February 2014 through the research of concentration and composition of airborne particulates with a size of PM 2.5 μm. This study aims to determine the origin and location of pollution sources in Surabaya so that it can be used as scientific reference as a step to make the right decisions and policies in tackling the impact of pollution. Data processing method in this research used analysis of receptor modeling that is Positive Matrix Factorization (PMF to determine

Recent Research on Language Maintenance.

Science.gov (United States)

Garcia, MaryEllen

2003-01-01

Describes recent research on language maintenance to provide broad, worldwide coverage of different language contact situations. Surveys various countries in which research within ethnic and minority language communities illuminates language maintenance or shift, or revitalization, for that group. (Author/VWL)

Voltage stability analysis considering the load dynamic characteristics and the voltage control devices; Analisis de estabilidad de voltaje considerando las caracteristicas dinamicas de la carga y dispositivos de control de voltaje

Energy Technology Data Exchange (ETDEWEB)

Hernandez Alvarez, Enrique

2001-09-15

improvement of the voltage stability. Finally, the application of the proposed methods of study to the analysis of voltage stability in an electrical network derived from the Mexican Peninsular system is presented. The influence of voltage control devices in the stability phenomenon is discussed and a comparison with the results obtained by means of other analysis techniques are presented, specifically, the study of the Q-V curves and the modal analysis of the power flow equations. [Spanish] El trabajo de investigacion que se presenta en esta tesis se centra en el analisis de la estabilidad de voltaje de mediano plazo considerando el efecto de las caracteristicas de la carga y su interaccion con los modelos de dispositivos de control de voltaje en la red de transmision. Mas concretamente, se define y estudia un tipo de modelo de carga con caracteristicas deseables para el estudio de la estabilidad de voltaje; los modelos genericos de carga derivados de pruebas de campo o de la aplicacion de tecnicas de identificacion y se analiza la influencia de la aplicacion de dispositivos de control para mejorar los margenes de estabilidad del sistema. Se estudian, asimismo, alternativas al modelado de sistemas de potencia para el estudio de la estabilidad de voltaje en sistemas complejos. Se presenta, en primer lugar, un analisis fundamental de las caracteristicas de estabilidad de voltaje en un sistema simplificado de potencia y se introduce el metodo de analisis adoptado. Se muestra que el fenomeno de inestabilidad se manifiesta como una bifurcacion tipo singular inducida del modo critico de voltaje cuando se opera el sistema bajo condiciones de estres. A continuacion, se analiza la contribucion de la accion de dispositivos de control al margen de estabilidad y se deducen criterios de analisis de estabilidad basados en el estudio de dicho modo. Se propone, a continuacion, un modelo lineal del sistema de potencia con caracteristicas deseables para el estudio de la estabilidad de voltaje

Ie - riss: una herramienta computacional para la estimación de pérdidas por sismo en edificaciones

OpenAIRE

SIERRA ÁLVAREZ, CÉSAR AUGUSTO; JARAMILLO FERNÁNDEZ, JUAN DIEGO

2012-01-01

Una formulación probabilista para estimar tasas de excedencia de pérdidas por terremoto es presentada. Luego de exponer la utilidad de este tipo de modelos, se presenta la formulación matemática de un modelo Poissoniano que considera la incertidumbre de variables tales como: magnitud en la fuente, intensidad del movimiento en el basamento rocoso, intensidad del movimiento a nivel de la superficie del suelo y daño en las edificaciones. Los resultados se sintetizan en las tasas de excedencia an...

Maintenance Mentor

National Research Council Canada - National Science Library

Jacobs, John