14 CFR 119.47 - Maintaining a principal base of operations, main operations base, and main maintenance base...

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Maintaining a principal base of operations, main operations base, and main maintenance base; change of address. 119.47 Section 119.47 Aeronautics... Under Part 121 or Part 135 of This Chapter § 119.47 Maintaining a principal base of operations, main...

Maine Agricultural Foods. Project SEED.

Science.gov (United States)

Beaulieu, Peter; Ossenfort, Pat

This paper describes an activity-based program that teaches students in grades 4-12 about the importance of Maine agriculture in their lives. Specifically, the goal is to increase student awareness of how the foods they eat are planted, harvested, and processed. The emphasis is on crops grown in Maine such as potatoes, broccoli, peas, blueberries,…

Main building fire drill safely concluded

CERN Document Server

CERN Bulletin

2015-01-01

Last week, a simulated fire in the stairwell of the Main Building put CERN’s emergency response procedures to the test.   Firefighters descend the stairwell in the Main Building as the simulated fire rises.   At 2 p.m. on 22 September, alarms sounded around CERN’s Main Building as an evacuation exercise got underway. A simulated fire in the  stairwell, complete with very realistic smoke, led to the evacuation of one of the busiest places at CERN. The Main Building complex includes the Carlson Wagonlit travel agency, the post office, UBS, Uniqa, the Users Office, the Staff Association and the Novae restaurant as well as the Main Auditorium, the Council Chamber and the Charpak meeting room. It was impressive to see how quickly the smoke propagated in the staircase as well as into the corridors, and equally impressive to see how smoothly, quickly and efficiently the evacuation proceeded. The...

30 CFR 75.302 - Main mine fans.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fans. 75.302 Section 75.302 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.302 Main mine fans. Each coal mine shall be ventilated by one or more main mine fans. Booster fans shall not be installed underground to assist main mine...

New Main Ring control system

International Nuclear Information System (INIS)

Seino, K.; Anderson, L.; Ducar, R.; Franck, A.; Gomilar, J.; Hendricks, B.; Smedinghoff, J.

1990-03-01

The Fermilab Main Ring control system has been operational for over sixteen years. Aging and obsolescence of the equipment make the maintenance difficult. Since the advent of the Tevatron, considerable upgrades have been made to the controls of all the Fermilab accelerators except the Main Ring. Modernization of the equipment and standardization of the hardware and software have thus become inevitable. The Tevatron CAMAC serial system has been chosen as a basic foundation in order to make the Main Ring control system compatible with the rest of the accelerator complex. New hardware pieces including intelligent CAMAC modules have been designed to satisfy unique requirements. Fiber optic cable and repeaters have been installed in order to accommodate new channel requirements onto the already saturated communication medium system. 8 refs., 2 figs

Isolators Including Main Spring Linear Guide Systems

Science.gov (United States)

Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

2017-01-01

Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

Main: FEB3 [TP Atlas

Lifescience Database Archive (English)

Full Text Available nt to sterilization and rinsing - One of the main components of biofilms is polysaccharides - Some pit-formi...ng bacteria such as Sphingomonas species A1 possess superchannels that directly incorporate and decompose polysaccharides - Detai...e entrance of the superchannel have been elucidated - We have obtained the crystals of ABC importer complexe...of water pipes and dental plaque are examples of biofilms. One of the main components of biofilms is polysac

ONKALO - Main drawings in 2007

International Nuclear Information System (INIS)

2008-05-01

The first overall site characterisation programme for a Finnish repository of spent nuclear fuel was introduced in 1982. This programme already suggested that the site confirmation for a detailed repository design and safety assessment should include characterisation performed in an underground rock characterisation facility (URCF). This idea was confirmed during the detailed site characterisation. International views have also emphasised the importance of underground characterisation before the final decision to construct the repository is taken. The underground rock characterisation facility (ONKALO) is excavated at Olkiluoto in the municipality of Eurajoki. ONKALO should be constructed to allow characterisation work for site confirmation without jeopardising long-term safety of the repository site. It should also be possible to link ONKALO later to the repository as to a part of it. The construction of ONKALO was started in 2004 and will be completed in 2014. The characterisation work has started in ONKALO and will focus on the disposal depth. In the main drawings stage, ONKALO was described at the level of detail needed for a construction permit in 2003. This meant description of the location, final structures and final systems. This summary report describes the development of design to updated main drawings in 2007 at the same level of detail (no temporary arrangements are described). The main changes are the added exhaust air shaft and advancing the controlled area's inlet air shaft to the ONKALO phase. Also the layout and the depth of the characterisation levels have been updated according to the current bedrock information. Some buildings on the surface will house sets of equipment directly connected with underground facility and this equipment is described in this report. No buildings or other equipment are described in this report, because they are not directly connected with the underground facility. The main element of ONKALO is a system of

Decontamination of main coolant pumps

International Nuclear Information System (INIS)

Roofthooft, R.

1988-01-01

Last year a number of main coolant pumps in Belgian nuclear power plants were decontaminated. A new method has been developed to reduce the time taken for decontamination and the volume of waste to be treated. The method comprises two phases: Oxidation with permanganate in nitric acid and dissolution in oxalic acid. The decontamination of main coolant pumps can now be achieved in less than one day. The decontamination factors attained range between 15 and 150. (orig.) [de

Riigikogu maine ja armastus / Aune Past

Index Scriptorium Estoniae

Past, Aune, 1954-

2007-01-01

Autor arutleb Riigikogu maine üle, toetudes TÜ ajakirjanduse ja kommunikatsiooni osakonna 2007. aastal tehtud uuringu tulemustele. Riigikogu liikmete maine paraneks, kui neil endil oleks selge, mis eesmärgil Toompeale mindi ja sellest siis ka rahvale kõneldaks

30 CFR 57.8525 - Main fan maintenance.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main fan maintenance. 57.8525 Section 57.8525 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Underground Only § 57.8525 Main fan maintenance. Main fans shall be maintained according to either the...

14 CFR 23.753 - Main float design.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 23.753 Section 23.753... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Floats and Hulls § 23.753 Main float design. Each seaplane main float must meet the requirements of § 23.521. [Doc...

14 CFR 27.547 - Main rotor structure.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main rotor structure. 27.547 Section 27.547... structure. (a) Each main rotor assembly (including rotor hubs and blades) must be designed as prescribed in this section. (b) [Reserved] (c) The main rotor structure must be designed to withstand the following...

Maine highway safety plan

Science.gov (United States)

2010-01-01

Each September 1, the MeBHS must provide NHTSA a comprehensive plan to reduce : traffic crashes and resulting deaths, injuries and property damage. The Highway Safety : Plan (HSP) serves as Maines application for available federal funds for these ...

Maine Migrant Program: 1997-1998 Program Evaluation.

Science.gov (United States)

Bazinet, Suzanne C., Ed.

The Maine Department of Education contracts with local educational agencies to administer the Maine Migrant Education Program. The program's overall mission is to provide the support necessary for migrant children to achieve Maine's academic standards. In 1997-98, 73 local migrant programs served 9,838 students, and 63 summer programs served 1,769…

46 CFR 182.610 - Main steering gear.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Main steering gear. 182.610 Section 182.610 Shipping...) MACHINERY INSTALLATION Steering Systems § 182.610 Main steering gear. (a) A vessel must be provided with a main steering gear that is: (1) Of adequate strength and capable of steering the vessel at all service...

Maine Bouguer Gravity Grid

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A 2 kilometer Bouguer anomaly grid for the state of Maine. Number of columns is 197 and number of rows is 292. The order of the data is from the lower left to the...

Maine coast winds

Energy Technology Data Exchange (ETDEWEB)

Avery, Richard

2000-01-28

The Maine Coast Winds Project was proposed for four possible turbine locations. Significant progress has been made at the prime location, with a lease-power purchase contract for ten years for the installation of turbine equipment having been obtained. Most of the site planning and permitting have been completed. It is expect that the turbine will be installed in early May. The other three locations are less suitable for the project, and new locations are being considered.

Main Coast Winds - Final Scientific Report

Energy Technology Data Exchange (ETDEWEB)

Jason Huckaby; Harley Lee

2006-03-15

The Maine Coast Wind Project was developed to investigate the cost-effectiveness of small, distributed wind systems on coastal sites in Maine. The restructuring of Maine's electric grid to support net metering allowed for the installation of small wind installations across the state (up to 100kW). The study performed adds insight to the difficulties of developing cost-effective distributed systems in coastal environments. The technical hurdles encountered with the chosen wind turbine, combined with the lower than expected wind speeds, did not provide a cost-effective return to make a distributed wind program economically feasible. While the turbine was accepted within the community, the low availability has been a negative.

Renovating the Main Building

CERN Multimedia

CERN Bulletin

2010-01-01

CERN's "Main Building" is exactly that. The Organization's central hub, with hundreds of staff and visitors passing through its doors every day, will soon be getting a well-earned facelift. Refurbishment work will proceed in phases, starting with the Salle des Pas Perdus, the concourse between the Council Chamber and the Main Auditorium. By the end of August, informal seating areas will be installed, electronic display panels will provide practical information and improved sound insulation will enhance conditions in the auditoria and surrounding meeting rooms.   In light green the area that will undergo the facelift. Work will start in July. The ground floor is home to the entrance to Restaurant No. 1, the bank, the post office, the travel agent, the Users Office, the Staff Association, the notice boards etc. Step up to the first floor to access CERN's largest lecture theatre, the Council Chamber and its "Pas Perdus" lobby. Everyone who works at or visits CERN i...

Description of the Main Features of the Series Production of the LHC Main Dipole Magnets

CERN Document Server

Savary, F; Chevret, P; de Rijk, G; Fessia, P; Liénard, P; Miles, J; Modena, M; Rossi, L; Tommasini, D; Vlogaert, J; Bresson, D; Grunblatt, G; Decoene, JF; Bressani, F; Drago, G; Gagliardi, P; Eysselein, F; Gärtner, W; Lublow, P

2008-01-01

The series production of the LHC main dipole magnets was completed in November 2006. This paper presents the organization implemented at CERN and the milestones fixed to fullfil the technical requirements and to respect the master schedule of the machine installation. The CERN organization for the production follow-up, the quality assurance and the magnet testing, as well as the organization of the three main contractors will be described. A description of the design work and procurement of most of the specific heavy tooling and key components will be given with emphasis on the advantages and drawbacks.

Main designations and attributions

International Nuclear Information System (INIS)

2010-01-01

The chapter presents the main designations and attributions of the LNMRI - Brazilian National Laboratory of Metrology of Ionizing Radiation, the Cooperative Center in Radiation Protection and Medical Preparations for Accidents with Radiation; the Treaty for fully banning of nuclear tests and the Regional Center for Training of IAEA

Maine winter roads : salt, safety, environment and cost.

Science.gov (United States)

2010-02-01

This report presents the results of a fourteen-month effort by a research team from the University of : Maine in cooperation with the Maine Department of Transportation (MaineDOT) to conduct : research, engage stakeholders, provide information, and f...

46 CFR 108.419 - Fire main capacity.

Science.gov (United States)

2010-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems Fire Main System § 108.419 Fire main capacity. The diameter of the fire... pumps operating simultaneously. ...

[Surgical angioplasty of the left main coronary artery].

Science.gov (United States)

Vranes, Mile; Velinović, Milos; Kocica, Mladen; Mikić, Aleksandar; Velimirović, Dusan; Djukić, Petar

2010-01-01

The conventional treatment for isolated stenosis of the left main coronary artery is bypass surgery (myocardial revascularization). However, the process of atherosclerosis is not arrested by myocardial revascularization and it will lead to the occlusion of the left main coronary artery. Revascularization will establish retrograde perfusion for 50-70% of the myocardium of the left ventricle. Direct surgical angioplasty of the left main coronary artery enables normal physiological perfusion of the whole myocardium and better myocardial function. The aim of our study is to point out a new surgical approach of treating left main coronary artery stenosis. Between October 2002 and October 2003, direct surgical angioplasty of the main left coronary artery was performed on three patients with isolated stenosis of the left main coronary artery using the anterior approach and the pericardium as a patch. The procedure was performed under total endotracheal anaesthesia and standard cardiopulmonary circulation, moderate hypothermia, anterograde St. Tomas cardioplegia and local cooling. Patients were followed clinically, echocardiographically and by load-tests. All three patients were without complications. In postoperative follow-up (54-68 months) neither angina pectoris nor electrocardiographically registered ischaemic changes were found. Load-tests performed every six months on all three patients were negative. Surgical angioplasty of isolated stenosis of the left main coronary artery is a preferred method for treating this type of coronary disease. Contraindications for this type of treatment are stenosis of the left main coronary artery with bifurcation and advanced calcification of the left main coronary artery.

Main-sequence photometry in NGC 2808

International Nuclear Information System (INIS)

Buonanno, R.; Corsi, C.E.; Fusi Pecci, F.; Harris, W.E.

1984-01-01

We have obtained a color-magnitude diagram for the southern globular cluster NGC 2808, to V/sub lim/approx. =21 (about 2 mag below the main-sequence turnoff). The internal photographic errors are sigma/sub V/approx. =0.02, sigma/sub B/-Vapprox. =0.03, small enough to permit a precise definition of the turnoff region and an estimate of the ''cosmic scatter'' along the main sequence. Fitting of the CMD to VandenBerg's [Astrophys. J. Suppl. 51, 29 (1983)] isochrones shows that an excellent match to the observations is achieved for model parameters of Yapprox. =0.2, Zapprox. =0.003 ([Fe/H]approx. =-0.8), and an age of (16 +- 2) billion years. All these characteristics are within the expected range from other observational constraints; no new clues from the main-sequence data alone have arisen to help explain the presence of the anomalous blue horizontal-branch stars

Nuclear power station main control room habitability

International Nuclear Information System (INIS)

Paschal, W.B.; Knous, W.S.

1989-01-01

The main control room at a nuclear power station must remain habitable during a variety of plant conditions and postulated events. The control room habitability requirement and the function of the heating, ventilating, air-conditioning, and air treatment system are to control environmental factors, such as temperature, pressure, humidity, radiation, and toxic gas. Habitability requirements provide for the safety of personnel and enable operation of equipment required to function in the main control room. Habitability as an issue has been gaining prominence with the Advisor Committee of Reactor Safeguards and the Nuclear Regulatory Commission since the incident at Three Mile Island. Their concern is the ability of the presently installed habitability systems to control the main control room environment after an accident. This paper discusses main control room HVAC systems; the concern, requirements, and results of NRC surveys and notices; and an approach to control room habitability reviews

30 CFR 57.8519 - Underground main fan controls.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Underground main fan controls. 57.8519 Section... Ventilation Surface and Underground § 57.8519 Underground main fan controls. All underground main fans shall have controls placed at a suitable protected location remote from the fan and preferably on the surface...

30 CFR 75.311 - Main mine fan operation.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fan operation. 75.311 Section 75.311... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.311 Main mine fan operation. (a) Main mine fans shall be continuously operated, except as otherwise approved in the ventilation plan, or when...

Nitrogen chronology of massive main sequence stars

NARCIS (Netherlands)

Köhler, K.; Borzyszkowski, M.; Brott, I.; Langer, N.; de Koter, A.

2012-01-01

Context. Rotational mixing in massive main sequence stars is predicted to monotonically increase their surface nitrogen abundance with time. Aims. We use this effect to design a method for constraining the age and the inclination angle of massive main sequence stars, given their observed luminosity,

30 CFR 57.8518 - Main and booster fans.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main and booster fans. 57.8518 Section 57.8518... and Underground § 57.8518 Main and booster fans. (a) All mine main and booster fans installed and used...-cycle shutdowns or planned or scheduled fan maintenance or fan adjustments where air quality is...

Space Shuttle main engine product improvement

Science.gov (United States)

Lucci, A. D.; Klatt, F. P.

1985-01-01

The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

14 CFR 25.753 - Main float design.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 25.753 Section 25.753 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.753 Main float design...

Asteroid Family Associations of Main-Belt Comets

Science.gov (United States)

Hsieh, Henry H.; Novakovic, Bojan; Kim, Yoonyoung; Brasser, Ramon

2016-10-01

We present a population-level analysis of the asteroid family associations of known main-belt comets or main-belt comet candidates (which, to date, have largely just been analyzed on individual bases as they have been discovered). In addition to family associations that have already been reported in the literature, we have identified dynamical relationships between 324P/La Sagra and the Alauda family, P/2015 X6 (PANSTARRS) and the Aeolia family, and P/2016 G1 (PANSTARRS) and the Adeona family. We will discuss the overall implications of these family associations, particularly as they pertain to the hypothesis that members of primitive asteroid family members may be more susceptible to producing observable sublimation-driven dust emission activity, and thus becoming main-belt comets. We will also discuss the significance of other dynamical and physical properties of a family or sub-family as they relate to the likelihood of that family containing one or more currently active main-belt comets.

Transition crossing in the main injector

International Nuclear Information System (INIS)

Wei, J.

1990-01-01

This report summarizes the study of various longitudinal problems pertaining to the transition-energy crossing in the proposed Fermi Lab Main Injector. The theory indicates that the beam loss and bunch-area growth are mainly caused by the chromatic non-linear effect, which is enhanced by the space-charge force near transition. Computer simulation using the program TIBETAN shows that a ''γ T jump'' of about 1.5 unit within 1 ms is adequate to achieve a ''clean'' crossing in the currently proposed h=588 scenario. 19 refs., 4 figs

14 CFR 27.753 - Main float design.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 27.753 Section 27.753... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential...

14 CFR 29.753 - Main float design.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 29.753 Section 29.753... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential...

Residential Energy Efficiency Potential: Maine

Energy Technology Data Exchange (ETDEWEB)

Wilson, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-02

Energy used by Maine single-family homes that can be saved through cost-effective improvements. Prepared by Eric Wilson and Noel Merket, NREL, and Erin Boyd, U.S. Department of Energy Office of Energy Policy and Systems Analysis.

Fermilab Main Injector plan

Energy Technology Data Exchange (ETDEWEB)

Anon.

1990-07-15

The Fermilab Main Injector is the centrepiece of the 'Fermilab III' scheme to significantly upgrade the Laboratory's existing accelerator complex. The new accelerator is designed to provide increased particle beam levels to boost the collision rate in the Tevatron proton-antiproton collider (luminosity in excess of 5 x 10{sup 31} per sq cm per s) and, if approved, would provide increased flexibility in all areas of high energy physics research.

A main sequence for quasars

Science.gov (United States)

Marziani, Paola; Dultzin, Deborah; Sulentic, Jack W.; Del Olmo, Ascensión; Negrete, C. A.; Martínez-Aldama, Mary L.; D'Onofrio, Mauro; Bon, Edi; Bon, Natasa; Stirpe, Giovanna M.

2018-03-01

The last 25 years saw a major step forward in the analysis of optical and UV spectroscopic data of large quasar samples. Multivariate statistical approaches have led to the definition of systematic trends in observational properties that are the basis of physical and dynamical modeling of quasar structure. We discuss the empirical correlates of the so-called “main sequence” associated with the quasar Eigenvector 1, its governing physical parameters and several implications on our view of the quasar structure, as well as some luminosity effects associated with the virialized component of the line emitting regions. We also briefly discuss quasars in a segment of the main sequence that includes the strongest FeII emitters. These sources show a small dispersion around a well-defined Eddington ratio value, a property which makes them potential Eddington standard candles.

A Main Sequence for Quasars

Directory of Open Access Journals (Sweden)

Paola Marziani

2018-03-01

Full Text Available The last 25 years saw a major step forward in the analysis of optical and UV spectroscopic data of large quasar samples. Multivariate statistical approaches have led to the definition of systematic trends in observational properties that are the basis of physical and dynamical modeling of quasar structure. We discuss the empirical correlates of the so-called “main sequence” associated with the quasar Eigenvector 1, its governing physical parameters and several implications on our view of the quasar structure, as well as some luminosity effects associated with the virialized component of the line emitting regions. We also briefly discuss quasars in a segment of the main sequence that includes the strongest FeII emitters. These sources show a small dispersion around a well-defined Eddington ratio value, a property which makes them potential Eddington standard candles.

Main: FEA5 [TP Atlas

Lifescience Database Archive (English)

Full Text Available al or an anti-cancer drug, is the main cause of hospital-acquired infection - Dru...e will elucidate the entire structure of the transport machinery in action to understand its functions in detail. FEA5.csml ...

CENTRE OF THE MAIN INTERESTS

Directory of Open Access Journals (Sweden)

DIANA DELEANU

2013-05-01

Full Text Available The centre of the main interests of the debtor is a legal tool meant to settle conflicts that can arise between jurisdictions in cross-border insolvencies, based on the principles of mutual recognition and co-operation.

Main approaches to the study of loss

Directory of Open Access Journals (Sweden)

Burina E. A.

2016-07-01

Full Text Available this article presents the main approaches to the concepts of grief and loss study. The article describes the contribution of E. Lindemann, Z. Freud, J. Bowlby, F.E. Vasiluk, and E. Kubler-Ross. The research also contains the main forms of grief and some stadial models within the scope of problematics.

Live insertion method used for main renewal

International Nuclear Information System (INIS)

Solkowitz, M.

1992-01-01

Baltimore Gas and Electric's pilot project using the live insertion method to replace a cast iron main provided excellent results. Its use on Eastern Avenue, a major state highway, was cost effective, provided gas service to customers during the work, required relatively short construction time and resulted in only minor traffic disruptions. Gas service transfers to the new main were done at customer convenience and resulted in outages of only a few hours per customer. This paper reports that the project involved inserting a 6-in. plastic line inside an existing 10-in. cast iron main. Miller Pipeline Corp., Indianapolis, supplier of the Insertec left-angle R right-angle live insertion method was contracted for the job. Miller technicians assisted BG and E forces by providing a load analysis of the main, a pushing machine and related supplies, foaming equipment and pipe cutting tools. Company forces were responsible for all preparatory work, including opening all excavations, installing bypasses, and fusing and testing the plastic pipe. Service transfers and renewals were also completed by company employees

Summary of main points

International Nuclear Information System (INIS)

2006-01-01

In conjunction with its 6. annual meeting, the WPDD in close co-operation with the FSC held a Topical session on 'Stakeholder Involvement in Decommissioning' on November 14, 2005. The session was attended by 36 participants totally representing 14 NEA member countries and 2 international organisations. Two keynote addresses were given at the Topical Session. The first one treated of what is needed for robust decisions and how to bring all stakeholders into the debate. In the second keynote address a summary was made on what have been said on stakeholder involvement in decommissioning during earlier meetings of the WPDD. The main part of the session was then devoted to views from different stakeholders regarding their role and their involvement. This part contained viewpoints from local communities (Kaevlinge in Sweden and Port Hope in Canada), authorities (Scottish Executive and CSNC) and operators (EDF from France and EWN from Germany). Case studies from the decommissioning of Dounrey in the UK and from Trojan and Main Yankee in the USA were presented in the end part of the Topical session followed by a summary and lessons learnt report by the Rapporteur. A detailed programme of the Topical session can be seen in Appendix 1

Guide to the Main Ring DO overpass

International Nuclear Information System (INIS)

Turkot, F.

1985-01-01

The DO overpass is a modification of the beam orbit in Main Ring in order to better accommodate a Tevatron collider detector at DO. The orbit is moved up approx. 51 inches over most of the long straight section at DO, thus making the Main Ring the world's first non-planar proton synchrotron. A similar overpass, but with four times the displacement, is planned for the CDF detector at the BO straight section. The nominal separation between the beam orbit in the Main Ring and the orbit in the Tevatron is 25.5 inches. Early in the design study of a detector that would utilize the Tevatron is a anti pp collider, it was apparent that a larger separation at the detector was highly desirable. In 1981, Tom Collins proposed a specific lattice geometry in the Main Ring for achieving larger separation, called ''the screw beam''. His proposal has served as the basis for the design of both the BO and DO overpasses. The main purpose of this report is to describe in some detail the implementation of the DO overpass. Topics to be covered include: (a) geometry of the overpass orbit, (b) the new hardware in the tunnel, (c) the power supply system, (d) the control facility, (e) accelerator beam dynamics ramifications, and (f) commissioning experience. A secondary purpose is to provide a fairly complete ''bibliography'' to the sources of information on the overpass. 17 refs., 17 figs

Fermilab Main Injector plan

International Nuclear Information System (INIS)

Anon.

1990-01-01

The Fermilab Main Injector is the centrepiece of the 'Fermilab III' scheme to significantly upgrade the Laboratory's existing accelerator complex. The new accelerator is designed to provide increased particle beam levels to boost the collision rate in the Tevatron proton-antiproton collider (luminosity in excess of 5 x 10 31 per sq cm per s) and, if approved, would provide increased flexibility in all areas of high energy physics research

Marketing Maine Tablestock Potatoes

OpenAIRE

Berney, Gerald; Grajewski, Gregory; Hinman, Don; Prater, Marvin E.; Taylor, April

2010-01-01

The Marketing Services Division of USDA’s Agricultural Marketing Service (AMS) was asked by USDA’s Agricultural Research Service (ARS) National Program Leader and ARS’s New England Soil and Water Research Laboratory personnel to help with existing efforts to assist Maine fresh potato farmers in their search for alternative marketing strategies, and reverse the recent decline in the profitability of their operations. ARS researchers previously had conducted an exhaustive study defining possibl...

Project evaluation: main characteristics

OpenAIRE

Moutinho, Nuno

2010-01-01

— The evaluation process of real investment projects must consider not only the traditional financial approach, but also non-financial aspects. Non financial analysis can provide additional relevant information about projects. We investigate financial and non-financial areas most relevant in project appraisal. We present main critical success factors and areas of analysis that lead to the perception of project success. Finally, companies are segmented to verify its financial and non-financial...

The main chemical safety problems in main process of nuclear fuel reprocessing plant

International Nuclear Information System (INIS)

Song Fengli; Zhao Shangui; Liu Xinhua; Zhang Chunlong; Lu Dan; Liu Yuntao; Yang Xiaowei; Wang Shijun

2014-01-01

There are many chemical reactions in the aqueous process of nuclear fuel reprocessing. The reaction conditions and the products are different so that the chemical safety problems are different. In the paper the chemical reactions in the aqueous process of nuclear fuel reprocessing are described and the main chemical safety problems are analyzed. The reference is offered to the design and accident analysis of the nuclear fuel reprocessing plant. (authors)

Main: FBB2 [TP Atlas

Lifescience Database Archive (English)

Full Text Available ion of the c-ring - A subunit packing model of E. coli c-ring has been proposed - The main chain secondary s...tructure of thermophile c-ring has been obtained ATP synthase is a general term for an enzyme that can synth

Functional conjugated pyridines via main-group element tuning.

Science.gov (United States)

Stolar, Monika; Baumgartner, Thomas

2018-03-29

Pyridine-based materials have seen widespread attention for the development of n-type organic materials. In recent years, the incorporation of main-group elements has also explored significant advantages for the development and tunability of organic conjugated materials. The unique chemical and electronic structure of main-group elements has led to several enhancements in conventional organic materials. This Feature article highlights recent main-group based pyridine materials by discussing property enhancements and application in organic electronics.

Sediment exchange between groin fields and main-stream

Science.gov (United States)

Qin, Jie; Zhong, Deyu; Wu, Teng; Wu, Lingli

2017-10-01

Sediment exchange between groin fields and the main-stream influences the transport and distribution of polluted sediment that represents a hazard for rivers and neighboring floodplains. Despite its practical significance, little research has been done on the sediment exchange process itself, and existing studies used to estimate the sediment exchange by morphological change. The sediment exchange process, however, differs from morphological variation and includes two behaviors: the entrance of main-stream sediment into groin fields and the movement of groin field sediment out of groin fields. Therefore, this study aims at examining this exchange process and exploring the mechanisms of different exchange phenomena. Experiments were conducted in a mobile-bed laboratory flume by using a novel experimental method that successfully separates the movement of groin fields sediment from that of main-stream sediment. In addition to traditional measurements, such as measurements of morphological changes, surface flow velocities, and bed-form propagation, the deposition of main-stream sediment in groin fields is measured in detail. The results demonstrate that morphological change cannot reflect the sediment exchange process. The deposition of main-stream sediment in groin fields is determined by the dynamics of sediment movement, in which bedload- and suspended-sediment-dominated processes exhibit different deposition patterns. The movement of groin field sediment out of groin fields is determined mainly by local scouring around groins.

Engineering Design of KSTAR tokamak main structure

International Nuclear Information System (INIS)

Im, K.H.; Cho, S.; Her, N.I.

2001-01-01

The main components of the KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak including vacuum vessel, plasma facing components, cryostat, thermal shield and magnet supporting structure are in the final stage of engineering design. Hundai Heavy Industries (HHI) has been involved in the engineering design of these components. The current configuration and the final engineering design results for the KSTAR main structure are presented. (author)

SMALL MAIN-BELT ASTEROID SPECTROSCOPIC SURVEY, PHASE II

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains visible-wavelength (0.435-0.925 micron) spectra for 1341 main-belt asteroids observed during the second phase of the Small Main-belt Asteroid...

Inversion mechanisms for OH main lines astrophysical masers

International Nuclear Information System (INIS)

Elitzur, M.

1977-01-01

Excitation processes that can lead to inversion of the main lines of the OH ground state are discussed. Due to the frequency dependence of the emission coefficient of dust, far-IR emitted by warm enough dust can excite the upper halves of the Λ-doublets of rotational levels more strongly than the lower halves. The cascade back to the ground state will then invert the main lines and it is shown that this mechanism can explain rather well the main lines emission from OH-IR stars. The main lines masers associated with compact HII regions are discussed extensively. It is argued that the most plausible explanation for them is a model based on the mechanism suggested some time ago by Johnston where the inversion is due to collisional excitation by streams of uni-directional electrons. (author)

Revisiting Reuse in Main Memory Database Systems

OpenAIRE

Dursun, Kayhan; Binnig, Carsten; Cetintemel, Ugur; Kraska, Tim

2016-01-01

Reusing intermediates in databases to speed-up analytical query processing has been studied in the past. Existing solutions typically require intermediate results of individual operators to be materialized into temporary tables to be considered for reuse in subsequent queries. However, these approaches are fundamentally ill-suited for use in modern main memory databases. The reason is that modern main memory DBMSs are typically limited by the bandwidth of the memory bus, thus query execution ...

Maine Environmental Vulnerability Index (EVI) Atlas, Maine - 2007, maps in portable document format (NODC Accession 0036827)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This four volume set of Environmental Vulnerability Index Maps depicts environmental resources along the coast of Maine most at risk from oil spilled into the marine...

Blood Pressure Response to Main Renal Artery and Combined Main Renal Artery Plus Branch Renal Denervation in Patients With Resistant Hypertension.

Science.gov (United States)

Fengler, Karl; Ewen, Sebastian; Höllriegel, Robert; Rommel, Karl-Philipp; Kulenthiran, Saaraaken; Lauder, Lucas; Cremers, Bodo; Schuler, Gerhard; Linke, Axel; Böhm, Michael; Mahfoud, Felix; Lurz, Philipp

2017-08-10

Single-electrode ablation of the main renal artery for renal sympathetic denervation showed mixed blood pressure (BP)-lowering effects. Further improvement of the technique seems crucial to optimize effectiveness of the procedure. Because sympathetic nerve fibers are closer to the lumen in the distal part of the renal artery, treatment of the distal main artery and its branches has been shown to reduce variability in treatment effects in preclinical studies and a recent randomized trial. Whether this optimized technique improves clinical outcomes remains uncertain. We report a 2-center experience of main renal artery and combined main renal artery plus branches renal denervation in patients with resistant hypertension using a multielectrode catheter. Twenty-five patients with therapy-resistant hypertension underwent renal sympathetic denervation with combined main renal artery and renal branch ablation and were compared to matched controls undergoing an ablation of the main renal artery only. BP change was assessed by ambulatory measurement at baseline and after 3 months. At baseline, BP was balanced between the groups. After 3 months, BP changed significantly in the combined ablation group (systolic/diastolic 24-hour mean and daytime mean BP -8.5±9.8/-7.0±10.7 and -9.4±9.8/-7.1±13.5 mm Hg, P renal artery and branches appears to improve BP-lowering efficacy and should be further investigated. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Left main coronary artery disease: pathophysiology, diagnosis, and treatment.

Science.gov (United States)

Collet, Carlos; Capodanno, Davide; Onuma, Yoshinobu; Banning, Adrian; Stone, Gregg W; Taggart, David P; Sabik, Joseph; Serruys, Patrick W

2018-06-01

The advent of coronary angiography in the 1960s allowed for the risk stratification of patients with stable angina. Patients with unprotected left main coronary artery disease have an increased risk of death related to the large amount of myocardium supplied by this vessel. Although coronary angiography remains the preferred imaging modality for the evaluation of left main coronary artery stenosis, this technique has important limitations. Angiograms of the left main coronary artery segment can be difficult to interpret, and almost one-third of patients can be misclassified when fractional flow reserve is used as the reference. In patients with clinically significant unprotected left main coronary artery disease, surgical revascularization was shown to improve survival compared with medical therapy and has been regarded as the treatment of choice for unprotected left main coronary artery disease. Two large-scale clinical trials published in 2016 support the usefulness of catheter-based revascularization in selected patients with unprotected left main coronary artery disease. In this Review, we describe the pathophysiology of unprotected left main coronary artery disease, discuss diagnostic approaches in light of new noninvasive and invasive imaging techniques, and detail risk stratification models to aid the Heart Team in the decision-making process for determining the best revascularization strategy for these patients.

PRISMA/DB: A Parallel Main-Memory Relational DBMS

NARCIS (Netherlands)

Apers, Peter M.G.; Flokstra, Jan; van den Berg, Carel A.; Grefen, P.W.P.J.; Wilschut, A.N.; Kersten, Martin L.; van den Berg, C.A.

1992-01-01

PRISMA/DB, a full-fledged parallel, main memory relational database management system (DBMS) is described. PRISMA/DB's high performance is obtained by the use of parallelism for query processing and main memory storage of the entire database. A flexible architecture for experimenting with

Molecular clusters of the main group elements

CERN Document Server

Driess, Matthias

2008-01-01

""To summarize, Molecular Clusters of the Main Group Elements is certainly not a popular science book, nor is it a textbook; it is a very good, up-to-date collection of articles for the specialist. Als Fazit bleibt: Molecular Clusters of the Main Group Elements ist sicher kein populissenschaftliches Werk, auch kein Lehrbuch, aber eine gelungene, hoch aktuelle Zusammenstellung fen interessierten Fachmann."" -Michael Ruck, TU Dresden, Angewandte Chemie, 2004 - 116/36 + International Edition 2004 - 43/36

46 CFR 62.35-20 - Oil-fired main boilers.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Oil-fired main boilers. 62.35-20 Section 62.35-20... AUTOMATION Requirements for Specific Types of Automated Vital Systems § 62.35-20 Oil-fired main boilers. (a) General. (1) All main boilers, regardless of intended mode of operation, must be provided with the...

Analysis of main artifacts in scanning probe microscopy (1)

International Nuclear Information System (INIS)

Alekperov, S.D.; Alekperov, S.D.

2012-01-01

The analysis of experiment carrying methodology in the scanning probe microscopy (SPM) region is carried out, the main parameters influencing on image quality are revealed. In order to reveal the artifact reason the main components of SPM signal which are divided on 5 groups : the useful signal; noises connected with external influences and temperature drift; distortions connected with piezoceramics and piezo-scanner non-ideality; probe geometry influence; apparatus noises are considered. The main methods of removal and minimization of the given artifacts are considered. The second and third groups of main components of SPM signal are considered in the articles first part

30 CFR 75.312 - Main mine fan examinations and records.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fan examinations and records. 75.312... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.312 Main mine fan examinations and records. (a) To assure electrical and mechanical reliability of main mine fans, each main mine...

40 CFR 63.308 - Standards for collecting mains.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Standards for collecting mains. 63.308 Section 63.308 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Standards for Coke Oven Batteries § 63.308 Standards for collecting mains. (a) On and after November 15...

Isolated systems with wind power. Main report

Energy Technology Data Exchange (ETDEWEB)

Lundsager, P.; Bindner, H.; Clausen, N.E.; Frandsen, S.; Hansen, L.H.; Hansen, J.C.

2001-06-01

The overall objective of this research project is to study the development of methods and guidelines rather than 'universal solutions' for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present a more unified and generally applicable approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, field measurements in Egypt, development of an inventory of small isolated systems, overview of end-user demands, analysis of findings and development of proposed guidelines. The project is reported in one main report and four topical reports, all of them issued as Risoe reports. This is the Main Report Risoe-R-1256, summing up the activities and findings of the project and outlining an Implementation Strategy for Isolated Systems with Wind Power, applicable for international organisations such as donor agencies and development banks. (au)

Collins' bypass for the main ring

International Nuclear Information System (INIS)

Ohnuma, S.

1982-01-01

Design of the bypass for the main ring at Fermilab is discussed. Specific design features discussed include space, path length, geometric closure, matching of betatron functions, and external dispersion. Bypass parameters are given

DIARRHEA IN CHILDREN: MAIN CAUSES AND WAYS OF TREATMENT

Directory of Open Access Journals (Sweden)

S.V. Bel’mer

2010-01-01

Full Text Available The article discusses main questions of diagnostics of diarrhea in children. Main cause of acute diarrhea is infection, mainly viral (rotavirus, etc.. Chronic diarrhea frequently has non-infectious origin. The need of multi-aspect diagnostics of diarrhea cause in children is related to the significance of treatment of main disease. Besides, treatment of chronic and acute diarrhea include major component: adsorbents based on smectite. In total treatment of diarrhea has to be complex with the use of dietotherapy and medications: mucocytoprotectors, regulators of motoric, pre- and probiotics.Key words: children, diarrhea, treatment.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2010;9(6:135-138

Current Russian patriotism: matter, features, main directions

Directory of Open Access Journals (Sweden)

Lutovinov Vladimir Ilich

2013-11-01

Full Text Available The article considers understanding and the main point of patriotism as one of high cultural values. The main approaches that reveal different sides of this phenomenon, its role and importance in a history of Russia in the 21st century are inferred from the analysis of viewpoints of Russian thinkers and contemporary researchers. The patriotism formation problems in Russian society and their condition are defined, the need of patriotic level rise as one of the conditions for great Russia rebirth is substantiated.

MECAR (Main Ring Excitation Controller and Regulator): A real time learning regulator for the Fermilab Main Ring or the Main Injector synchrotron

International Nuclear Information System (INIS)

Flora, R.; Martin, K.; Moibenko, A.; Pfeffer, H.; Wolff, D.; Prieto, P.; Hays, S.

1995-04-01

The real time computer for controlling and regulating the FNAL Main Ring power supplies has been upgraded with a new learning control system. The learning time of the system has been reduced by an order of magnitude, mostly through the implementation of a 95 tap FIR filter in the learning algorithm. The magnet system consists of three buses, which must track each other during a ramp from 100 to 1700 amps at a 2.4 second repetition rate. This paper will present the system configuration and the tools used during development and testing

Challenges of the ILC Main Linac

International Nuclear Information System (INIS)

Ross, Marc

2007-01-01

With the completion of the ILC Reference Design Report (RDR), we begin the next phase of the project - development of the Engineering Design. Our strategy and priorities come from the identification, contained in the RDR, of scientific and engineering challenges of the ILC. First among these is the cost of the main linac which, including the associated earthworks and cooling/power systems, amounts to 60% of the ILC total cost. Next is the challenge to reach the highest practical gradient since this R and D has the largest cost leverage of any of the ongoing programs. Finally, we have to understand the beam dynamics and beam tuning processes in the main linac, as we will not have the opportunity to do full (or even large) scale tests of these before the linac is constructed.

Main - RPSD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ... as rice. Data file File name: rpsd_main_sjis.zip File URL: ftp://ftp.biosciencedbc.jp/archive/rpsd/LATEST/r.../ftp.biosciencedbc.jp/archive/rpsd/LATEST/rpsd_main_utf8.zip File size: 120 KB Simple search URL http://togo...nse Update History of This Database Site Policy | Contact Us Main - RPSD | LSDB Archive ...

2015 City of Portland, Maine, Lidar

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — 2015 City of Portland Maine Lidar Data Acquisition and Processing Woolpert Order No. 75564 Contractor: Woolpert, Inc. This task is for a high resolution data set of...

At ISR Main Control Room

CERN Multimedia

1983-01-01

After 13 years the exploitation of the Intersecting Storage Rings as a beam-beam collider went to an end. In this last year the demands were very exacting, both in terms of operating time and diversified running conditions (Annual Report 1983 p. 123). Before dismantelement the photographer made a last tour, see photos 8310889X --> 8310667X. This photo shows the Main Control Room.

The investigation of the superconducting NMR-imaging main magnets

International Nuclear Information System (INIS)

Zhang, Y.; Han, S.; Feng, Z.X.

1989-01-01

The design principles of MRI main magnets and the problems in the design process have been analyzed. A computer program in which the critical characteristics of superconductor, the uniformity of the magnetic field, the economization of magnet and the selection of magnet constructions are considered has been established. The program can also be used to design high uniformity superconducting magnet in some other uses. In designing MRI superconducting main magnet, five different magnet constructions have been analyzed. Using this computer program the authors made a series of designs of MRI superconducting main magnets with different construction, different central magnetic field, and different bore diameters. By analyzing the computing results some conclusions useful for the practical design of the MRI superconducting main magnets are obtained

Main facts 1995; Faits marquants 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, monitoring and plants operations.

The Fermilab Main Injector Technical Design Handbook

Energy Technology Data Exchange (ETDEWEB)

None, None

1994-08-01

This report contains a description of the design, cost estimate, and construction schedule of the Fermilab Main Injector (FMI) Project. The technical, cost, and schedule baselines for the FMI Project have already been established and may be found in the Fermilab Main Injector Title I Design Report, issued in August 1992. This report updates and expands upon the design and schedule for construction of all subsystem components and associated civil construction described in the Title I Design Report. The facilities described have been designed in conformance with DOE 6430.1A, "United States Department of Energy General Design Criteria."

Main successes, achievements. Paths of development

Directory of Open Access Journals (Sweden)

A. A. Kubanova

2015-01-01

Full Text Available The article provides the overview of incidence of sexually transmitted infections and skin disorders over time in Russian Federation in 2004-2014 with its main positive tendencies; results of reorganisation of bed capacity of dermatovenerologic medical organizations; dermatovenerologic bed rates.

D.E.R. 91 main facts

International Nuclear Information System (INIS)

Schmidt, N.

1991-01-01

This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: New applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, network analysis, information and informatic equipment

D.E.R. 92 - Main facts

International Nuclear Information System (INIS)

1992-01-01

This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, network analysis, information and informatic equipment

Air and gas pockets in sewerage pressure mains.

Science.gov (United States)

Lubbers, C L; Clemens, F

2005-01-01

In The Netherlands, wastewater is collected in municipal areas and transported to large centralised WWTPs by means of an extensive system of pressure mains. Over the past decades these pressure mains did not receive much attention in terms of monitoring of performance or maintenance. For that reason, in practice their state of functioning is often not known. Failure of operation is only noticed when the capacity of the system proves to be insufficient to fulfil the minimum design capacity demand. A recent inventory showed that half of the pressure mains show an increased pressure loss for no directly obvious reason. Many causes may account for the reduction of the system's nominal capacity like an increased wall roughness, scaling or occurrence of free gas in the pipeline. The occurrence of free gas may be caused by degassing of dissolved (bio) gas or by air entrained at the pumps' inlet or at air valves. A research study is started that will focus on three main issues: The description of the gas-water phenomena in wastewater pressure mains with respect to transportation and dynamic hydraulic behaviour, A method to diagnose gas problems, and To overcome future problems by either applying remedial measures or improving the design of wastewater pressure systems. For this study, two experimental facilities are constructed, a small circuit for the study of multi-phase flow and a second, larger one for the research into diagnostic methods. This paper describes the preliminary results of the experiments in the multi-phase circuit.

THE MAIN GENERAL HEALTH INDICATORS OF PRETERM NEWBORNS

OpenAIRE

Елена Николаевна Никулина; Светлана Ивановна Елгина; Юлия Александровна Липкова; Сергей Викторович Липков

2017-01-01

Objective – to determine the main health indicators in preterm newborns. Materials and Methods: Premature newborns and full-term newborns (160 and 1408, respectively) were investigated with clinical, instrumental, and statistical methods. Anthropometric parameters, somatic health, vulvar anatomy were considered to be the main criteria for general health. Results: The indicators of general health (physical development, somatic health, vulvar anatomy) in premature and full-term newborns...

A transitionless lattice for the Fermilab Main Injector

International Nuclear Information System (INIS)

Ng, K.Y.; Trbojevic, D.; Lee, S.Y.

1991-05-01

Medium energy (1 to 30 GeV) accelerators are often confronted with transition crossing during acceleration. A lattice without transition is presented, which is a design for the Fermilab Main Injector. The main properties of this lattice are that the γ t is an imaginary number, the maxima of the dispersion function are small, and two long-straight section with zero dispersion. 7 refs., 5 figs

Assigning Main Orientation to an EOH Descriptor on Multispectral Images.

Science.gov (United States)

Li, Yong; Shi, Xiang; Wei, Lijun; Zou, Junwei; Chen, Fang

2015-07-01

This paper proposes an approach to compute an EOH (edge-oriented histogram) descriptor with main orientation. EOH has a better matching ability than SIFT (scale-invariant feature transform) on multispectral images, but does not assign a main orientation to keypoints. Alternatively, it tends to assign the same main orientation to every keypoint, e.g., zero degrees. This limits EOH to matching keypoints between images of translation misalignment only. Observing this limitation, we propose assigning to keypoints the main orientation that is computed with PIIFD (partial intensity invariant feature descriptor). In the proposed method, SIFT keypoints are detected from images as the extrema of difference of Gaussians, and every keypoint is assigned to the main orientation computed with PIIFD. Then, EOH is computed for every keypoint with respect to its main orientation. In addition, an implementation variant is proposed for fast computation of the EOH descriptor. Experimental results show that the proposed approach performs more robustly than the original EOH on image pairs that have a rotation misalignment.

Main sequences defined by Hyades and field stars

International Nuclear Information System (INIS)

Upgren, A.R.

1978-01-01

The author reviews the main sequences defined by members of the Hyades cluster and by the field stars in the solar neighborhood. For this purpose, the discussion is limited primarily to the stars of the lower portions of the main sequence, especially those of spectral classes K and early M. There are two reasons for emphasis on the faint red dwarf stars. First, the value of a parallax depends on its size or, more accurately, on the error in parallax divided by the parallax itself. Large parallaxes of high precision occur in large numbers only for stars inhabiting the lower main sequence. Furthermore, brighter stars of earlier spectral classes are more likely to be influenced by evolutionary effects which may differ between the Hyades and field stars, and which are difficult to calibrate. (Auth.)

14 CFR 25.533 - Hull and main float bottom pressures.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float bottom pressures. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.533 Hull and main float bottom pressures. (a) General. The hull and main float structure, including frames and bulkheads...

30 CFR 57.22203 - Main fan operation (I-C mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main fan operation (I-C mines). 57.22203... Standards for Methane in Metal and Nonmetal Mines Ventilation § 57.22203 Main fan operation (I-C mines). Main fans shall be operated continuously while ore production is in progress. ...

Quasi-periodic latitudinal shift of Saturn's main auroral emission

Science.gov (United States)

Roussos, E.; Palmaerts, B.; Grodent, D. C.; Radioti, K.; Krupp, N.; Yao, Z.

2017-12-01

The main component of the ultraviolet auroral emissions at Saturn consists in a ring of emission around each pole of the planet. This main ring of emission has been revealed to oscillate by a few degrees in the prenoon-premidnight direction with a period of 10.8h. This auroral oscillation is thought to be induced by a rotating external magnetospheric current system associated with the planetary period oscillations. Here we report, by means of auroral imaging sequences obtained with the Ultraviolet Imaging Spectrograph (UVIS) on board the Cassini spacecraft, the first direct observation of an additional motion of the main emission superimposed to this oscillation. The whole main emission ring exhibits step-like displacements in latitude mainly towards dayside, decoupled from the 10.8h oscillation. These latitude shifts recur around every hour, which is a typical short periodicity at Saturn previously identified in the aurora intensity, in the charged particle fluxes and in the magnetic field. This unique observation directly demonstrates what has been inferred from past in-situ and remote measurements: the 1-hour periodicities reveal a global and fundamental magnetospheric oscillation mode that acts independently of the local magnetospheric conditions. However, the magnetospheric mechanism responsible for these 1-hour auroral shifts is still unknown. It is possible that Alfvén waves inducing hourly magnetic fluctuations might also modify the place where the field-aligned electrons precipitate in the ionosphere and produce the main emission.

Bunch coalescing in the Fermilab Main Ring

International Nuclear Information System (INIS)

Wildman, D.; Martin, P.; Meisner, K.; Miller, H.W.

1987-01-01

A new RF system has been installed in the Fermilab Main Ring to coalesce up to 13 individual bunches of protons or antiprotons into a single high-intensity bunch. The coalescing process consists of adiabatically reducing the h=1113 Main Ring RF voltage from 1 MV to less than 1 kV, capturing the debunched beam in a linearized h=53 and h=106 bucket, rotating for a quarter of a synchrotron oscillation period, and then recapturing the beam in a single h=1113 bucket. The new system is described and the results of recent coalescing experiments are compared with computer-generated particle tracking simulations

Water Hammer in Pumped Sewer Mains

DEFF Research Database (Denmark)

Larsen, Torben

This publication is intended for engineers seeking an introduction to the problem of water hammer in pumped pressure mains. This is a subject of increasing interest because of the development of larger and more integrated sewer systems. Consideration of water hammer is essential for structural...

JWST-MIRI spectrometer main optics design and main results

Science.gov (United States)

Navarro, Ramón; Schoenmaker, Ton; Kroes, Gabby; Oudenhuysen, Ad; Jager, Rieks; Venema, Lars

2017-11-01

MIRI ('Mid InfraRed Instrument') is the combined imager and integral field spectrometer for the 5-29 micron wavelength range under development for the James Webb Space Telescope JWST. The flight acceptance tests of the Spectrometer Main Optics flight models (SMO), part of the MIRI spectrometer, are completed in the summer of 2008 and the system is delivered to the MIRI-JWST consortium. The two SMO arms contain 14 mirrors and form the MIRI optical system together with 12 selectable gratings on grating wheels. The entire system operates at a temperature of 7 Kelvin and is designed on the basis of a 'no adjustments' philosophy. This means that the optical alignment precision depends strongly on the design, tolerance analysis and detailed knowledge of the manufacturing process. Because in principle no corrections are needed after assembly, continuous tracking of the alignment performance during the design and manufacturing phases is important. The flight hardware is inspected with respect to performance parameters like alignment and image quality. The stability of these parameters is investigated after exposure to various vibration levels and successive cryogenic cool downs. This paper describes the philosophy behind the acceptance tests, the chosen test strategy and reports the results of these tests. In addition the paper covers the design of the optical test setup, focusing on the simulation of the optical interfaces of the SMO. Also the relation to the SMO qualification and verification program is addressed.

Pilot RCM application to the Diablo Canyon main stream system

International Nuclear Information System (INIS)

Groff, C.R.; Beckham, P.E.; Bych, K.H.

1988-01-01

In 1986 Pacific Gas ampersand Electric Company (PG ampersand E) became extremely interested in reliability-centered maintenance (RCM) after the initial review of two successful Electric Power Research Institute sponsored projects. RCM was visualized as a methodology to common sensitize the burgeoning preventive maintenance (PM) program at the Diablo Canyon plant. RCM could further the uses of predictive and condition-monitoring techniques, as well as eliminate maintenance on components whose failures were noncritical. An extensive review of maintenance and operation experience data, in conjunction with plant staff recommendations and a prioritization according to maintenance expenditures and operational/safety significance, produced the selected system: the turbine main steam supply system (main steam). The pilot project segmented the main steam system into eight subsystems to aid in analysis: (a) main steam isolation valves, (b) auxiliary feedwater pump turbine, (c) overpressure protection (steam dump), (d) main feedwater pump turbines, (e) main steam, (f) main turbine, (g) steam blowdown, and (h) moisture separator reheaters. System analysis activities, including the preparation of functional failure analyses, failure modes and effects analyses, and logic model analyses, were conducted in parallel with corrective and preventive maintenance data-gathering activities to maximize project team personnel participation during the project. Results and lessons learned are summarized

Main and interaction effects of extrusion temperature and usage ...

African Journals Online (AJOL)

ali

2012-10-30

Oct 30, 2012 ... The main and interaction effects of three extrusion ... oil extraction and allow the use of a homegrown protein supplement in the .... Statistical analysis. The main and .... acceptable level of antitrypsin factor is 4 mg/g; this level.

49 CFR 236.16 - Electric lock, main track releasing circuit.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Electric lock, main track releasing circuit. 236... Rules and Instructions: All Systems General § 236.16 Electric lock, main track releasing circuit. When an electric lock releasing circuit is provided on the main track to permit a train or an engine to...

14 CFR 25.531 - Hull and main float takeoff condition.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float takeoff condition. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.531 Hull and main float takeoff condition. For the wing and its attachment to the hull or main float— (a) The aerodynamic...

The BTeV main spectrometer

International Nuclear Information System (INIS)

Sheldon, P.D.

2001-01-01

BTeV is a second generation B-factory experiment that will use a double-arm, forward spectrometer in the C0 experimental hall at the Fermilab Tevatron. I will describe the motivation and design of the 'main spectrometer', consisting of a ring-imaging Cherenkov system for charged particle identification, an electromagnetic calorimeter of lead-tungstate crystals, a proportional tube muon system with magnetized filtering steel, and a straw-tube and silicon strip charged particle tracking system

46 CFR 58.25-10 - Main and auxiliary steering gear.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Main and auxiliary steering gear. 58.25-10 Section 58.25... AUXILIARY MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-10 Main and auxiliary steering gear. (a) Power-operated main and auxiliary steering gear must be separate systems that are independent throughout their...

Assigning Main Orientation to an EOH Descriptor on Multispectral Images

Directory of Open Access Journals (Sweden)

Yong Li

2015-07-01

Full Text Available This paper proposes an approach to compute an EOH (edge-oriented histogram descriptor with main orientation. EOH has a better matching ability than SIFT (scale-invariant feature transform on multispectral images, but does not assign a main orientation to keypoints. Alternatively, it tends to assign the same main orientation to every keypoint, e.g., zero degrees. This limits EOH to matching keypoints between images of translation misalignment only. Observing this limitation, we propose assigning to keypoints the main orientation that is computed with PIIFD (partial intensity invariant feature descriptor. In the proposed method, SIFT keypoints are detected from images as the extrema of difference of Gaussians, and every keypoint is assigned to the main orientation computed with PIIFD. Then, EOH is computed for every keypoint with respect to its main orientation. In addition, an implementation variant is proposed for fast computation of the EOH descriptor. Experimental results show that the proposed approach performs more robustly than the original EOH on image pairs that have a rotation misalignment.

ANS main control complex three-dimensional computer model development

International Nuclear Information System (INIS)

Cleaves, J.E.; Fletcher, W.M.

1993-01-01

A three-dimensional (3-D) computer model of the Advanced Neutron Source (ANS) main control complex is being developed. The main control complex includes the main control room, the technical support center, the materials irradiation control room, computer equipment rooms, communications equipment rooms, cable-spreading rooms, and some support offices and breakroom facilities. The model will be used to provide facility designers and operations personnel with capabilities for fit-up/interference analysis, visual ''walk-throughs'' for optimizing maintain-ability, and human factors and operability analyses. It will be used to determine performance design characteristics, to generate construction drawings, and to integrate control room layout, equipment mounting, grounding equipment, electrical cabling, and utility services into ANS building designs. This paper describes the development of the initial phase of the 3-D computer model for the ANS main control complex and plans for its development and use

14 CFR 23.533 - Hull and main float bottom pressures.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float bottom pressures. 23... Water Loads § 23.533 Hull and main float bottom pressures. (a) General. The hull and main float....00213; K2=hull station weighing factor, in accordance with figure 2 of appendix I of this part; VS1...

Training of professional interpreters in Cuba: Its main historic backgrounds

Directory of Open Access Journals (Sweden)

Diana Oliveros-Domínguez

2017-06-01

Full Text Available The formation of interpreters in Cuba has as its main goal to train a professional who is able to mediate among Spanish speakers and not-Spanish speakers in our historic situation. This research article aims to analyze the main backgrounds of interpretation teaching at Universidad de Oriente, taking into account its dynamics and the didactic treatment of the cognitive factors involved in the interpretation process. This enables to deepen into the main characteristics of the process, through a study of short-term memory training and the didactic devices used for its improvement; and establish three main stages in the evolution.

Chromaticity compensation scheme for the Main Injector

International Nuclear Information System (INIS)

Bogacz, S.A.

1993-05-01

The current Main Injector lattice is studied in the context of full chromaticity compensation in the presence of the eddy current, saturation and the end-pack sextupole fields generated by the dipole magnets. Two families of correcting sextupole magnets are placed to compensate these fields and to adjust the chromaticity (in both planes) to some desired value. Variation of the dipole induced sextupole fields with the B-field (changing along a ramp) are modeled according to recent experimental measurements of the Main Injector dipole magnet Analysis of the required sextupole strengths is carried out along two realistic momentum ramps. The results of our calculation give quantitative insight into the requisite performance of the sextupole magnets

Organization structure. Main activities of the Division

International Nuclear Information System (INIS)

2008-01-01

In this chapter the organization structure as well as main activities of the Division for radiation safety, NPP decommissioning and radioactive waste management are presented. This Division of the VUJE, a.s. consists of the following sections and departments: Section for economic and technical services; Section for radiation protection of employees; Department for management of emergency situations and risk assessment; Department for implementation of nuclear power facilities decommissioning and RAW management; Department for personnel and environmental dosimetry; Department for preparation of NPP decommissioning; Department for RAW treatment technologies; Department for chemical regimes and physico-chemical analyses; Department for management of nuclear power facilities decommissioning and RAW management. Main activities of this Division are presented.

Maine Project against Bullying. Final Report.

Science.gov (United States)

Saufler, Chuck; Gagne, Cyndi

Noting that bullying among primary school-age children has become recognized as an antecedent to more violent behavior in later grades, the 3-year Maine Project Against Bullying examined currently available research on bullying and evaluated books, curricula, media materials, and programs to identify resources and strategies which can be applied…

Budget Period 1 Summary Report: Hywind Maine Project

Energy Technology Data Exchange (ETDEWEB)

Keiser, Meagan [Statoil, Stavanger (Norway)

2014-02-28

In accordance with the Statement of Project Objectives (SOPO) agreed to between the Department of Energy (“DOE”) and Statoil for the Hywind Maine project, Statoil hereby submits a Budget Period 1 Summary Report which includes accomplishments for the project. The report includes summaries of the other submitted reports (see Section 1.2-2) and progress regarding innovations leading to potential reductions in the Cost of Energy (see Section 3). The Hywind Demo project, the world’s first full-scale 2.3 megawatts (MW) floating wind turbine, installed at a water depth of 200 meter (m), 10 kilometer (km) off the coast of Norway, has proven that the Hywind floating substructure is a suitable platform for conventional multi- MW turbines. A principal goal of the Hywind Maine Project was to leverage that experience, both to demonstrate the commercial feasibility of the technology and to further develop and optimize the technology all in order to bring the costs down in a larger scale development. With the Hywind Maine Project, Statoil planned to deploy four turbines of 3 MW in approximately 140 meters water depth. Although the project in Maine will not move forward, much value was gained through the BP1 work package. Advanced modeling related to the design basis, which will have applicability beyond the Maine project, was completed. In addition, initial supply chain analyses were conducted, which will help assist with development of updated cost of energy models. Geophysical and various environmental surveys were also conducted, the results of which Statoil has committed to share publicly, and which will help build a database of information that future developers may be able to access. Finally, Statoil gained a greater understanding of the US offshore wind industry and related markets, which will assist the company as it looks for full-scale, commercial opportunities.

Supply and demand of timber for wood turning in Maine

Science.gov (United States)

Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

1987-01-01

An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

Main - PLACE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...ilable. Data file File name: place_main.zip File URL: ftp://ftp.biosciencedbc.jp/archive/place/LATEST/place_...se Update History of This Database Site Policy | Contact Us Main - PLACE | LSDB Archive ...

Main meal quality in Brazil and United Kingdom: Similarities and differences.

Science.gov (United States)

Gorgulho, Bartira Mendes; Pot, Gerda Karolien; Sarti, Flavia Mori; Marchioni, Dirce Maria

2017-04-01

Consumption of fast food and ready-to-eat meals has been positively associated with obesity. In the UK, ready-made meals are more often consumed than in Brazil, a country in which nutrition transition is relatively low. This study aimed to compare the nutritional quality of the main meal consumed by adults in Brazil and UK. Food record data was obtained from representative samples from UK and Brazil databases. The Main Meal Quality Index (MMQI) was applied to estimate the quality of the main meal consumed in Brazil and UK. Differences in food groups consumed in the main meal in Brazil and UK were observed using classification decision tree. Meals with higher average energy content were lunch for Brazil, and dinner for the UK. On average, the Brazilian main meal had better nutritional quality (4.42 times higher), independently of sex, age, family income, nutritional status and energy consumed, with higher scores of fiber, carbohydrate, total fat, saturated fat and energy density. However, UK's main meal included more fruits and vegetables. Food preparations combined with rice and beans were classified as Brazilian main meal, while combinations with fast food items, as fried potatoes, sandwiches and sugary beverages, were classified as UK main meals. In Brazil, the main meal quality was lower among women and obese individuals, presenting significant positive association with age, and negative association with energy intake and family income; while in UK, only age was positively associated with MMQI. Although main meals in Brazil had higher nutritional quality compared to the UK, main meals consumed in both countries need nutritional improvement. Copyright © 2017 Elsevier Ltd. All rights reserved.

High Precision Current Control for the LHC Main Power Converters

CERN Document Server

Thiesen, H; Hudson, G; King, Q; Montabonnet, V; Nisbet, D; Page, S

2010-01-01

Since restarting at the end of 2009, the LHC has reached a new energy record in March 2010 with the two 3.5 TeV beams. To achieve the performance required for the good functioning of the accelerator, the currents in the main circuits (Main Bends and Main Quadrupoles) must be controlled with a higher precision than ever previously requested for a particle accelerator at CERN: a few parts per million (ppm) of nominal current. This paper describes the different challenges that were overcome to achieve the required precision for the current control of the main circuits. Precision tests performed during the hardware commissioning of the LHC illustrate this paper.

Load Asymmetry Observed During Orion Main Parachute Inflation

Science.gov (United States)

Morris, Aaron L.; Taylor, Thomas; Olson, Leah

2011-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) has flight tested the first two generations of the Orion parachute program. Three of the second generation tests instrumented the dispersion bridles of the Main parachute with a Tension Measuring System. The goal of this load measurement was to better understand load asymmetry during the inflation process of a cluster of Main parachutes. The CPAS Main parachutes exhibit inflations that are much less symmetric than current parachute literature and design guides would indicate. This paper will examine loads data gathered on three cluster tests, quantify the degree of asymmetry observed, and contrast the results with published design guides. Additionally, the measured loads data will be correlated with videos of the parachute inflation to make inferences about the shape of the parachute and the relative load asymmetry. The goal of this inquiry and test program is to open a dialogue regarding asymmetrical parachute inflation load factors.

Main - KOME | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...ntents List of datasets Data file File name: kome_main.zip File URL: ftp://ftp.biosciencedbc.jp/archive/kome...ase Database Description Download License Update History of This Database Site Policy | Contact Us Main - KOME | LSDB Archive ...

Alternative Fuels Data Center: Maine Transportation Data for Alternative

Science.gov (United States)

Biodiesel-Blended Diesel Documentation Requirement Data Download Fueling Stations 149 stations in Maine with alternative fuels Fuel Public Private Biodiesel (B20 and above) 2 1 Compressed Natural Gas (CNG) 0 2 Electric ://www.youtube.com/embed/jHftlruFR40 Video thumbnail for Maine's Only Biodiesel Manufacturer Powers Fleets in the

Modern Portfolio Theory: Some Main Results

OpenAIRE

Müller, Heinz H.

2017-01-01

This article summarizes some main results in modern portfolio theory. First, the Markowitz approach is presented. Then the capital asset pricing model is derived and its empirical testability is discussed. Afterwards Neumann-Morgenstern utility theory is applied to the portfolio problem. Finally, it is shown how optimal risk allocation in an economy may lead to portfolio insurance

Seasonal Composite Chlorophyll Concentrations - Gulf of Maine

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This personal geodatabase contains raster images of chlorophyll concentrations in the Gulf of Maine. These raster images are seasonal composites, and were calculated...

Monthly Composite Chlorophyll Concentrations - Gulf of Maine

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This personal geodatabase contains raster images of chlorophyll concentrations in the Gulf of Maine. These raster images are monthly composites, and were calculated...

Did A Planet Survive A Post-Main Sequence Evolutionary Event?

Science.gov (United States)

Sorber, Rebecca; Jang-Condell, Hannah; Zimmerman, Mara

2018-06-01

The GL86 is star system approximately 10 pc away with a main sequence K- type ~ 0.77 M⊙ star (GL 86A) with a white dwarf ~0.49 M⊙ companion (GL86 B). The system has a ~ 18.4 AU semi-major axis, an orbital period of ~353 yrs, and an eccentricity of ~ 0.39. A 4.5 MJ planet orbits the main sequence star with a semi-major axis of 0.113 AU, an orbital period of 15.76 days, in a near circular orbit with an eccentricity of 0.046. If we assume that this planet was formed during the time when the white dwarf was a main sequence star, it would be difficult for the planet to have remained in a stable orbit during the post-main sequence evolution of GL86 B. The post-main sequence evolution with planet survival will be examined by modeling using the program Mercury (Chambers 1999). Using the model, we examine the origins of the planet: whether it formed before or after the post-main sequence evolution of GL86B. The modeling will give us insight into the dynamical evolution of, not only, the binary star system, but also the planet’s life cycle.

Main unit electrical protection at Sizewell 'B' power station

International Nuclear Information System (INIS)

Fischer, A.; Keates, T.

1992-01-01

For any power station, reliable electrical protection of the main generating units (generators plus generator transformers) has important commercial implications. Spurious trips cause loss of generation and consequent loss of revenue, while failure to rapidly isolate a fault leads to unnecessary damage and again, loss of generation and revenue. While these conditions apply equally to Sizewell B there are additional factors to be taken into consideration. A spurious trip of a main generating unit may lead to a trip of the reactor with an associated challenge to the shutdown and core cooling plant. The generator transformers, besides exporting power from the generators to the 400 kV National Grid, also import power from the Grid to the 11 kV Main Electrical System, which in turn is the preferred source of supply to the Essential Electrical System. The Main Unit Protection is designed to clear generator faults leaving this off-site power route intact. Hence failure to operate correctly could affect the integrity of the Essential Electrical Supplies. (Author)

The renovation of the Main Building is approaching completion

CERN Multimedia

Anaïs Schaeffer

2011-01-01

The renovation work under way in the CERN Main Building should be completed by June. From the floors to the ceilings, everything has been done to give this historic building a new lease of life.     Taken in the early 60s, this picture illustrates how light maintenance was a challenge for the auditorium in CERN’s main building.   Nobody who has recently had to shimmy between the cables, ladders and toolboxes deposited around the main hall of Building 500 to get to the post office, the bank or Restaurant 1 can be oblivious to the fact that the ground floor of the Main Building has been getting a face-lift. The renovation work, which started with the first-floor concourse in June 2010, should be finished over the next couple of months. The first-floor renovations, now almost complete, set the tone for the rest of the project. The floor and ceiling, both fitted with special acoustic materials for efficient noise damping, have been completely refurbished and the Building ...

2016 USGS Lidar DEM: Maine QL2

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Product: These are Digital Elevation Model (DEM) data for Franklin, Oxford, Piscataquis, and Somerset Counties, Maine as part of the required deliverables for the...

Circumstellar Material on and off the Main Sequence

Science.gov (United States)

Steele, Amy; Debes, John H.; Deming, Drake

2017-06-01

There is evidence of circumstellar material around main sequence, giant, and white dwarf stars that originates from the small-body population of planetary systems. These bodies tell us something about the chemistry and evolution of protoplanetary disks and the planetary systems they form. What happens to this material as its host star evolves off the main sequence, and how does that inform our understanding of the typical chemistry of rocky bodies in planetary systems? In this talk, I will discuss the composition(s) of circumstellar material on and off the main sequence to begin to answer the question, “Is Earth normal?” In particular, I look at three types of debris disks to understand the typical chemistry of planetary systems—young debris disks, debris disks around giant stars, and dust around white dwarfs. I will review the current understanding on how to infer dust composition for each class of disk, and present new work on constraining dust composition from infrared excesses around main sequence and giant stars. Finally, dusty and polluted white dwarfs hold a unique key to our understanding of the composition of rocky bodies around other stars. In particular, I will discuss WD1145+017, which has a transiting, disintegrating planetesimal. I will review what we know about this system through high speed photometry and spectroscopy and present new work on understanding the complex interplay of physics that creates white dwarf pollution from the disintegration of rocky bodies.

Oahu Sewer Main Lines, Oahu County HI, 2016, Honolulu GIS

Data.gov (United States)

U.S. Environmental Protection Agency — Linear features representing sewer main lines as maintained by Honolulu ENV Department of Environmental Services. Includes an inventory of sewer mains used for...

Failure analysis of a helicopter's main rotor bearing

International Nuclear Information System (INIS)

Shahzad, M.; Qureshi, A.H.; Waqas, H.; Hussain, N.; Ali, N.

2011-01-01

Presented results report some of the findings of a detailed failure analysis carried out on a main rotor hub assembly, which had symptoms of burning and mechanical damage. The analysis suggests environmental degradation of the grease which causes pitting on bearing-balls. The consequent inefficient lubrication raises the temperature which leads to the smearing of cage material (brass) on the bearing-balls and ultimately causes the failure. The analysis has been supported by the microstructural studies, thermal analysis and micro-hardness testing performed on the affected main rotor bearing parts. (author)

30 CFR 75.310 - Installation of main mine fans.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of main mine fans. 75.310 Section... mine fans. (a) Each main mine fan shall be— (1) Installed on the surface in an incombustible housing... that gives a signal at the mine when the fan either slows or stops. A responsible person designated by...

Installation Strategy for the LHC Main Dipoles

CERN Multimedia

Fartoukh, Stephane David

2004-01-01

All positions in the LHC machine are not equivalent in terms of beam requirements on the geometry and the field quality of the main dipoles. In the presence of slightly or strongly out-of tolerance magnets, a well-defined installation strategy will therefore contribute to preserve or even optimize the performance of the machine. Based on the present status of the production, we have anticipated a list of potential issues (geometry, transfer function, field direction and random b3) which, combined by order of priority, have been taken into account to define a simple but efficient installation algorithm for the LHC main dipoles. Its output is a prescription for installing the available dipoles in sequence while reducing to an absolute minimum the number of holes required by geometry or FQ issues.

Solid Rocket Booster Large Main and Drogue Parachute Reliability Analysis

Science.gov (United States)

Clifford, Courtenay B.; Hengel, John E.

2009-01-01

The parachutes on the Space Transportation System (STS) Solid Rocket Booster (SRB) are the means for decelerating the SRB and allowing it to impact the water at a nominal vertical velocity of 75 feet per second. Each SRB has one pilot, one drogue, and three main parachutes. About four minutes after SRB separation, the SRB nose cap is jettisoned, deploying the pilot parachute. The pilot chute then deploys the drogue parachute. The drogue chute provides initial deceleration and proper SRB orientation prior to frustum separation. At frustum separation, the drogue pulls the frustum from the SRB and allows the main parachutes that are mounted in the frustum to unpack and inflate. These chutes are retrieved, inspected, cleaned, repaired as needed, and returned to the flight inventory and reused. Over the course of the Shuttle Program, several improvements have been introduced to the SRB main parachutes. A major change was the replacement of the small (115 ft. diameter) main parachutes with the larger (136 ft. diameter) main parachutes. Other modifications were made to the main parachutes, main parachute support structure, and SRB frustum to eliminate failure mechanisms, improve damage tolerance, and improve deployment and inflation characteristics. This reliability analysis is limited to the examination of the SRB Large Main Parachute (LMP) and drogue parachute failure history to assess the reliability of these chutes. From the inventory analysis, 68 Large Main Parachutes were used in 651 deployments, and 7 chute failures occurred in the 651 deployments. Logistic regression was used to analyze the LMP failure history, and it showed that reliability growth has occurred over the period of use resulting in a current chute reliability of R = .9983. This result was then used to determine the reliability of the 3 LMPs on the SRB, when all must function. There are 29 drogue parachutes that were used in 244 deployments, and no in-flight failures have occurred. Since there are no

Drifter Observations of the Gulf of Maine Coastal Current.

Science.gov (United States)

Manning, J P; McGillicuddy, D J; Pettigrew, N R; Churchill, J H; Incze, L S

2009-04-15

Two-hundred and twenty seven satellite-tracked drifters were deployed in the Gulf of Maine (GoM) from 1988 to 2007, primarily during spring and summer. The archive of tracks includes over 100,000 kilometers logged thus far. Statistics such as transit times, mean velocities, response to wind events, and preferred pathways are compiled for various areas of the coastal GoM. We compare Lagrangian flow with Eulerian estimates from near-by moorings and evaluate drifter trajectories using Ekman theory and 3-D ocean circulation models. Results indicate that the Gulf of Maine Coastal Current is a strong and persistent feature centered on the 94 ± 23 meter isobath, but that particles: a) deviate from the seasonal-mean core fairly regularly, and are often re-entrained; b) follow a slower (9 cm/s), less-constrained path in the western portion off the coast of Maine relative to the eastern (16 cm/s) section; and c) can be affected by wind events and small scale baroclinic structures. Residence times calculated for each ½ degree grid cell throughout the GoM depict some regions (Eastern Maine and Western Nova Scotia) as being relatively steady, flow-through systems, while others (Penobscot, Great South Channel) have more variable, branching pathways. Travel times for drifters that are retained within the coastal current along the entire western side of the Gulf of Maine are typically less than two months (55 days).

Space Shuttle Main Propulsion System Anomaly Detection: A Case Study

Data.gov (United States)

National Aeronautics and Space Administration — The space shuttle main engine (SSME) is part of the Main Propnlsion System (MPS) which is an extremely complex system containing several sub-systems and components,...

Lithium depletion and rotation in main-sequence stars

International Nuclear Information System (INIS)

Balachandran, S.

1990-01-01

Lithium abundances were measured in nearly 200 old disk-population F stars to examine the effects of rotational braking on the depletion of Li. The sample was selected to be slightly evolved off the main sequence so that the stars have completed all the Li depletion they will undergo on the main sequence. A large scatter in Li abundances in the late F stars is found, indicating that the Li depletion is not related to age and spectral type alone. Conventional depletion mechanisms like convective overshoot and microscopic diffusion are unable to explain Li depletion in F stars with thin convective envelopes and are doubly taxed to explain such a scatter. No correlation is found between Li abundance and the present projected rotational velocity and some of the most rapid rotators are undepleted, ruling out meridional circulation as the cause of Li depletion. There is a somewhat larger spread in Li abundances in the spun-down late F stars compared to the early F stars which should remain rotationally unaltered on the main sequence. 85 refs

Hillshades for the main 8 Hawaiian Islands

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These hillshade datasets were derived from USGS 7.5' DEM Quads for the main 8 Hawaiian Islands. Individual DEM quads were first converted to a common datum, and...

Main Issues in Big Data Security

Directory of Open Access Journals (Sweden)

Julio Moreno

2016-09-01

Full Text Available Data is currently one of the most important assets for companies in every field. The continuous growth in the importance and volume of data has created a new problem: it cannot be handled by traditional analysis techniques. This problem was, therefore, solved through the creation of a new paradigm: Big Data. However, Big Data originated new issues related not only to the volume or the variety of the data, but also to data security and privacy. In order to obtain a full perspective of the problem, we decided to carry out an investigation with the objective of highlighting the main issues regarding Big Data security, and also the solutions proposed by the scientific community to solve them. In this paper, we explain the results obtained after applying a systematic mapping study to security in the Big Data ecosystem. It is almost impossible to carry out detailed research into the entire topic of security, and the outcome of this research is, therefore, a big picture of the main problems related to security in a Big Data system, along with the principal solutions to them proposed by the research community.

Main-chain supramolecular block copolymers.

Science.gov (United States)

Yang, Si Kyung; Ambade, Ashootosh V; Weck, Marcus

2011-01-01

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

Alarm system for ABWR main control panels

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, Yuji; Saito, Koji [Toshiba Corp., Yokohoma (Japan)

1997-09-01

TOSHIBA has developed integrated digital control and instrumentation system for ABWR, which is the third-generation man machine interface system for main control room that we call A-PODIA (Advanced PODIA). A-Podia has been introduced the first actual ABWR plant in Japan. in A-PODIA, TOSHIBA has realized improvement of alarm system that all operator crews in the control room can recognize plant anomalies easily. The alarm system can recognize essential alarms for plant safety easily and understand annunciators with each integrated annunciators and their prioritized color easily by classifying alarms into plant-level essential annunciators, system-level integrated annunciators and equipment level individual annunciators with hierarchical structure. This paper describes conventional alarm system and the design philosophy, alarm system design and operation of ``Alarm System for ABWR Main Control Panels``. (author). 5 refs, 8 figs, 1 tab.

The double main sequence of Omega Centauri

Science.gov (United States)

Bedin, L. R.; Piotto, G.; Anderson, J.; King, I. R.; Cassisi, S.; Momany, Y.

Recent, high precision photometry of Omega Centauri, the biggest Galactic globular cluster, has been obtained with Hubble Space Telescope (HST). The color magnitude diagram reveals an unexpected bifurcation of colors in the main sequence (MS). The newly found double MS, the multiple turnoffs and subgiant branches, and other sequences discovered in the past along the red giant branch of this cluster add up to a fascinating but frustrating puzzle. Among the possible explanations for the blue main sequence an anomalous overabundance of helium is suggested. The hypothesis will be tested with a set of FLAMES@VLT data we have recently obtained (ESO DDT program), and with forthcoming ACS@HST images. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by AURA, Inc., under NASA contract NAS 5-26555.

Alarm system for ABWR main control panels

International Nuclear Information System (INIS)

Kobayashi, Yuji; Saito, Koji

1997-01-01

TOSHIBA has developed integrated digital control and instrumentation system for ABWR, which is the third-generation man machine interface system for main control room that we call A-PODIA (Advanced PODIA). A-Podia has been introduced the first actual ABWR plant in Japan. in A-PODIA, TOSHIBA has realized improvement of alarm system that all operator crews in the control room can recognize plant anomalies easily. The alarm system can recognize essential alarms for plant safety easily and understand annunciators with each integrated annunciators and their prioritized color easily by classifying alarms into plant-level essential annunciators, system-level integrated annunciators and equipment level individual annunciators with hierarchical structure. This paper describes conventional alarm system and the design philosophy, alarm system design and operation of ''Alarm System for ABWR Main Control Panels''. (author). 5 refs, 8 figs, 1 tab

IDENTIFICATION OF MAIN ECONOMIC AND SOCIAL CAUSES OF ROMANIAN MIGRATION

Directory of Open Access Journals (Sweden)

Elena Raluca CRISTIAN

2015-07-01

Full Text Available The main worldwide determinants influencing in time the migration phenomenon are: external environment (international political situation, economy, population growth in the migrant’s country, armed conflicts, religious persecution and xenophobic attacks. The migration of manpower from Romania is based on a number of psychological, social, financial reasons of migrants to increase their income and improve their living conditions in another country. The main cause of migration in developed countries is the migration flows originating mainly from poor or very poor countries considered disadvantaged.

Construction of the main building network environment in IHEP

International Nuclear Information System (INIS)

Wang Yanming

2004-01-01

Based on the new network structure at IHEP, we re-constructed the network in Main Building at IHEP in order to realize the goal of steadily supporting the network application. We chose high performance and administrable switches and configured them properly. This improved that the network security, management ability. So the network at Main Building became more safe, steady, reliable and high-efficient. (authors)

Building Process and Architectural Planning Characteristics of Daehan Hospital Main Building

Directory of Open Access Journals (Sweden)

Geauchul LEE

2016-04-01

Full Text Available This paper explores the introduction process of Daehan Hospital from Japan as the modern medical facility in Korea, and the architectural planning characteristics as a medical facility through the detailed building process of Daehan Hospital main building. The most noticeable characteristic of Daehan Hospital is that it was designed and constructed not by Korean engineers but by Japanese engineers. Therefore, Daehan Hospital was influenced by Japanese early modern medical facility, and Japanese engineers modeled Daehan Hospital main building on Tokyo Medical School main building which was constructed in 1876 as the first national medical school and hospital. The architectural type of Tokyo Medical School main building was a typical school architecture in early Japanese modern period which had a middle corridor and a pseudo Western-style tower, but Tokyo Medical School main building became the model of a medical facility as the symbol of the medical department in Tokyo Imperial University. This was the introduction and transplantation process of Japanese modern ‘model’ like as other modern systems and technologies during the Korean modern transition period. However, unlike Tokyo Medical School main building, Daehan Hospital main building was constructed not as a wooden building but as a masonry building. Comparing with the function of Daehan Hospital main building, its architectural form and construction costs was excessive scale, which was because Japanese Resident-General of Korea had the intention of ostentation that Japanese modernity was superior to Korean Empire.

[Building Process and Architectural Planning Characteristics of Daehan Hospital Main Building].

Science.gov (United States)

Lee, Geauchul

2016-04-01

This paper explores the introduction process of Daehan Hospital from Japan as the modern medical facility in Korea, and the architectural planning characteristics as a medical facility through the detailed building process of Daehan Hospital main building. The most noticeable characteristic of Daehan Hospital is that it was designed and constructed not by Korean engineers but by Japanese engineers. Therefore, Daehan Hospital was influenced by Japanese early modern medical facility, and Japanese engineers modeled Daehan Hospital main building on Tokyo Medical School main building which was constructed in 1876 as the first national medical school and hospital. The architectural type of Tokyo Medical School main building was a typical school architecture in early Japanese modern period which had a middle corridor and a pseudo Western-style tower, but Tokyo Medical School main building became the model of a medical facility as the symbol of the medical department in Tokyo Imperial University. This was the introduction and transplantation process of Japanese modern 'model' like as other modern systems and technologies during the Korean modern transition period. However, unlike Tokyo Medical School main building, Daehan Hospital main building was constructed not as a wooden building but as a masonry building. Comparing with the function of Daehan Hospital main building, its architectural form and construction costs was excessive scale, which was because Japanese Resident-General of Korea had the intention of ostentation that Japanese modernity was superior to Korean Empire.

Croatian repository construction project - present status and main obstacles

International Nuclear Information System (INIS)

Kucar Dragicevic, S.; Subasic, D.; Schaller, A.; Lokner, V.; Cerskov Klika, M.

1999-01-01

Croatia has been preparing backgrounds for the construction of the repository for low and intermediate radioactive waste on its territory, almost for a decade, now. In the name of Hrvtaska elektroprivreda, the co-owner of the NE Krsko, APO has been co-ordinating and organising numerous activities and projects during that time period. Siting process, safety assessment, disposal technology and repository design and public acceptance issues are the main fields of activities. The overall status of the project at the moment, including the overview of the present status of the main four aspects of activities, will be presented. Relatively, big and important progress made on the project work out during the last two years, as well as the main obstacles we were faced with during that time period, will be discussed.(author)

TRIGA reactor main systems

International Nuclear Information System (INIS)

Boeck, H.; Villa, M.

2007-01-01

This module describes the main systems of low power (<2 MW) and higher power (≥2 MW) TRIGA reactors. The most significant difference between the two is that forced reactor cooling and an emergency core cooling system are generally required for the higher power TRIGA reactors. However, those TRIGA reactors that are designed to be operated above 3 MW also use a TRIGA fuel that is specifically designed for those higher power outputs (3 to 14 MW). Typical values are given for the respective systems although each TRIGA facility will have unique characteristics that may only be determined by the experienced facility operators. Due to the inherent wide scope of these research reactor facilities construction and missions, this training module covers those systems found at most operating TRIGA reactor facilities but may also discuss non-standard equipment that was found to be operationally useful although not necessarily required. (author)

Radiation shielding of the main injector

International Nuclear Information System (INIS)

Bhat, C.M.; Martin, P.S.

1995-05-01

The radiation shielding in the Fermilab Main Injector (FMI) complex has been carried out by adopting a number of prescribed stringent guidelines established by a previous safety analysis. Determination of the required amount of radiation shielding at various locations of the FMI has been done using Monte Carlo computations. A three dimensional ray tracing code as well as a code based upon empirical observations have been employed in certain cases

Condition monitoring of main coolant pumps, Dhruva

International Nuclear Information System (INIS)

Prasad, V.; Satheesh, C.; Acharya, V.N.; Tikku, A.C.; Mishra, S.K.

2002-01-01

Full text: Dhruva is a 100 MW research reactor with natural uranium fuel, heavy water as moderator and primary coolant. Three Centrifugal pumps circulate the primary coolant across the core and the heat exchangers. Each pump is coupled to a flywheel (FW) assembly in order to meet operational safety requirements. All the 3 main coolant pump (MCP) sets are required to operate during operation of the reactor. The pump-sets are in operation since the year 1984 and have logged more than 1,00,000 hrs. Frequent breakdowns of its FW bearings were experienced during initial years of operation. Condition monitoring of these pumps, largely on vibration based parameters, was initiated on regular basis. Break-downs of main coolant pumps reduced considerably due to the fair accurate predictions of incipient break-downs and timely maintenance efforts. An effort is made in this paper to share the experience

Solar-Type Activity in Main-Sequence Stars

CERN Document Server

Gershberg, Roald E

2005-01-01

Solar-type activity over the whole range of the electromagnetic spectrum is a phenomenon inherent in the majority of low- and moderate-mass main sequence stars. In this monograph observational results are summarized in a systematic and comprehensive fashion. The analysis of the various manifestations of such stellar activity leads to the identification of these phenomena with macroscopic non-linear processes in a magnetized plasma. Comparative study of flare stars and the Sun has become increasingly fruitful and is presently an active field of research involving stellar and solar physicists, experts in plasma physics and high-energy astrophysicists. This book will provide them with both an introduction and overview of observational results from the first optical photometry and spectroscopy, from the satellite telescopes International Ultraviolet Explorer to Hubble Space Telescope, XMM-Newton and Chandra, as well as with the present physical interpretation of solar-type activity in main sequence stars. Gershbe...

Study on Manufacturing Process of Hollow Main Shaft by Open Die Forging

International Nuclear Information System (INIS)

Kwon, Yong Chul; Kang, Jong Hun; Kim, Sang Sik

2016-01-01

The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts

Study on Manufacturing Process of Hollow Main Shaft by Open Die Forging

Energy Technology Data Exchange (ETDEWEB)

Kwon, Yong Chul [Gyeongnam Technopark, Changwon (Korea, Republic of); Kang, Jong Hun [Jungwon Univ., Goisan (Korea, Republic of); Kim, Sang Sik [Gyeongsang Natiional Univ., Jinju (Korea, Republic of)

2016-02-15

The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts.

Stochastically excited oscillations on the upper main sequence

DEFF Research Database (Denmark)

Antoci, Victoria

2013-01-01

Convective envelopes in stars on the main sequence are usually connected only with stars of spectral types F5 or later. However, observations as well as theory indicate that the convective outer layers in earlier stars, despite being shallow, are still effective and turbulent enough to stochastic......Convective envelopes in stars on the main sequence are usually connected only with stars of spectral types F5 or later. However, observations as well as theory indicate that the convective outer layers in earlier stars, despite being shallow, are still effective and turbulent enough...... Pulsating B and Be stars, all in the context of solar-like oscillations....

Emittance and trajectory control in the main linacs of the NLC

International Nuclear Information System (INIS)

Assmann, R.; Adolphsen, C.; Bane, K.; Raubenheimer, T.O.; Thompson, K.

1996-09-01

The main linacs of the next generation of linear colliders need to accelerate the particle beams to energies of up to 750 GeV while maintaining very small emittances. This paper describes the main mechanisms of static emittance growth in the main linacs of the Next Linear Collider (NLC). The authors present detailed simulations of the trajectory and emittance control algorithms that are foreseen for the NLC. They show that the emittance growth in the main linacs can be corrected down to about 110%. That number is significantly better than required for the NLC design luminosity

The advanced main control console for next japanese PWR plants

International Nuclear Information System (INIS)

Tsuchiya, A.; Ito, K.; Yokoyama, M.

2001-01-01

The purpose of the improvement of main control room designing in a nuclear power plant is to reduce operators' workload and potential human errors by offering a better working environment where operators can maximize their abilities. In order to satisfy such requirements, the design of main control board applied to Japanese Pressurized Water Reactor (PWR) type nuclear power plant has been continuously modified and improved. the Japanese Pressurized Water Reactor (PWR) Utilities (Electric Power Companies) and Mitsubishi Group have developed an advanced main control board (console) reflecting on the study of human factors, as well as using a state of the art electronics technology. In this report, we would like to introduce the configuration and features of the Advanced Main Control Console for the practical application to the next generation PWR type nuclear power plants including TOMARI No.3 Unit of Hokkaido Electric Power Co., Inc. (author)

Maine State Briefing Book on low-level radioactive waste management

Energy Technology Data Exchange (ETDEWEB)

1981-08-01

The Maine State Briefing Book is one of a series of state briefing books on low-level radioactive waste management practices. It has been prepared to assist state and Federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Maine. The profile is the result of a survey of radioactive material licensees in Maine. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested partices including industry, government, the media, and interest groups. The assessment was developed through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the briefing book provides demographic and socioeconomic data and a discussion of relevant goverment agencies and activities, all of which may impact management practices in Maine.

Improvement of main control room

International Nuclear Information System (INIS)

Chae, Sung Ki; Ham, Chang Sik; Kwon, Ki Chun

1991-07-01

Information display system, advanced alarm system and fiber optical communication system were developed to improve the main control room in nuclear power plant. Establishing the new hierachical information structure of plant operation data, plant overview status board(POSB) and digital indicator(DI) were designed and manufactured. The prototype advanced alarm system which employed the new alarm logics and algorithm compared with the conventional alarm system were developed and its effectiveness was proved. Optical communication system which has multi-drop feature and capability of upgrading to large-scale system by using BITBUS communication protocol which is proven technology, were developed. Reliability of that system was enhanced by using distributed control. (Author)

Looking for Synergy with Momentum in Main Asset Classes

OpenAIRE

Lukas Macijauskas; Dimitrios I. Maditinos

2014-01-01

As during turbulent market conditions correlations between main asset-classes falter, classical asset management concepts seem unreliable. This problem stimulates search for non-discretionary asset allocation methods. The aim of the paper is to test weather the concept of Momentum phenomena could be used as a stand alone investment strategy using all main asset classes. The study is based on exploring historical prices of various asset classes; statistical data analysis method is used. Result...

Velocity Estimation of the Main Portal Vein with Transverse Oscillation

DEFF Research Database (Denmark)

Brandt, Andreas Hjelm; Hansen, Kristoffer Lindskov; Nielsen, Michael Bachmann

2015-01-01

This study evaluates if Transverse Oscillation (TO) can provide reliable and accurate peak velocity estimates of blood flow the main portal vein. TO was evaluated against the recommended and most widely used technique for portal flow estimation, Spectral Doppler Ultrasound (SDU). The main portal...

INNOVATION DIFFUSION THEORY MAIN DEVELOPMENT STAGES

Directory of Open Access Journals (Sweden)

S. V. Lisafiev

2011-01-01

Full Text Available Abstract: Main innovation diffusion development theory stages are: Rogers model of moving new products to the market including characteristics of its segments; mathematic substantiation of this model by Bass; Moor model taking into account gaps between adjacent market segments; Goldenberg model making it possible to predict sales drops at new product life cycle initial stages. It is reasonable to use this theory while moving innovative products to the market.

Targeting the orexinergic system: Mainly but not only for sleep ...

African Journals Online (AJOL)

Orexin receptors belong to the big family of G protein coupled receptors (GPCRs) that constitute the main targets in the modern pharmacological approaches. Although the orexinergic system is involved in a variety of processes, treating sleep-wakefulness disorders such as narcolepsy and insomnia, remains the main ...

Pre-main sequence sun: a dynamic approach

International Nuclear Information System (INIS)

Newman, M.J.; Winkler, K.H.A.

1979-01-01

The classical pre-main sequence evolutionary behavior found by Hayashi and his coworkers for the Sun depends crucially on the choice of initial conditions. The Hayashi picture results from beginning the calculation with an already centrally condensed, highly Jeans unstable object not terribly far removed from the stellar state initially. The present calculation follows the work of Larson in investigating the hydrodynamic collapse and self-gravitational accretion of an initially uniform, just Jeans unstable interstellar gas-dust cloud. The resulting picture for the early history of the Sun is quite different from that found by Hayashi. A rather small (R approx. = 2 R/sub sun/), low-luminosity (L greater than or equal to L/sub sun/) protostellar core develops. A fully convective stellar core, characteristic of Hayashi's work, is not found during the accretion process, and can only develop, if at all, in the subsequent pre-main sequence Kelvin-Helmholtz contraction of the core. 3 figures, 1 table

The LHC Main Quadrupoles during Series Fabrication

CERN Document Server

Tortschanoff, Theodor; Durante, M; Hagen, P; Klein, U; Krischel, D; Payn, A; Rossi, L; Schellong, B; Schmidt, P; Simon, F; Schirm, K-M; Todesco, E

2006-01-01

By the end of August 2005 about 320 of the 400 main LHC quadrupole magnets have been fabricated and about 220 of them assembled into their cold masses, together with corrector magnets. About 130 of them have been cold tested in their cryostats and most of the quadrupoles exceeded their nominal excitation, i.e. 12,000 A, after no more than two training quenches. During this series fabrication, the quality of the magnets and cold masses was thoroughly monitored by means of warm magnetic field measurements, of strict geometrical checking, and of various electrical verifications. A number of modifications were introduced in order to improve the magnet fabrication, mainly correction of the coil geometry for achieving the specified field quality and measures for avoiding coil insulation problems. Further changes concern the electrical connectivity and insulation of instrumentation, and of the corrector magnets inside the cold masses. The contact resistances for the bus-bar connections to the quench protection diode...

Legal preconditions for the construction and operation of district gas mains

Energy Technology Data Exchange (ETDEWEB)

Joachim, H

1977-06-01

The course of procedure in connection with the construction of district gas mains is outlined. This includes acquisition of main rights under private law and expropriation law, special problems such as peculiarities of land or landscape, road crossings, facilities of the Federal railway, agriculture etc., operational problems such as protection zones, building territories within the area of the main layout, drainage effects, high-pressure pipes, etc.

Study on the task categorization of main control room in NPP

International Nuclear Information System (INIS)

Fang Zhou; Ma Zhicai; Ma Xusheng; Zheng Mingguang

2005-01-01

The paper states the importance and trendy requirements of Main Control Room (MCR) in nuclear power plant and introduces how to implement the human factor engineering principle in the design of advanced main control room. It mainly focuses on the purpose and functions, strategy and methodology, scope and contents of the MCR task categorization. The preliminary MCR task categorization is performed according to these principles. (authors)

Crack widths in concrete with fibers and main reinforcement

DEFF Research Database (Denmark)

Christensen, Frede; Ulfkjær, Jens Peder; Brincker, Rune

2015-01-01

The main object of the research work presented in this paper is to establish design tools for concrete structures where main reinforcement is combined with addition of short discrete steel fibers. The work is concerned with calculating and measuring crack widths in structural elements subjected...... to bending load. Thus, the aim of the work is to enable engineers to calculate crack widths for flexural concrete members and analyze how different combinations of amounts of fibers and amounts of main reinforcement can meet a given maximum crack width requirement. A mathematical model including...... the ductility of the fiber reinforced concrete (FRC) is set up and experimental work is conducted in order to verify the crack width model. The ductility of the FRC is taken into account by using the stress crack width relation. The constitutive model for the FRC is based on the idea that the initial part...

14 CFR 25.529 - Hull and main float landing conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float landing conditions. 25... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.529 Hull and main.... (b) Unsymmetrical landing for hull and single float seaplanes. Unsymmetrical step, bow, and stern...

On the Roche constants for main-sequence binaries

International Nuclear Information System (INIS)

Giannuzzi, M.A.

1979-01-01

The ratios C 1 /C 2 of the constants defining the equipotential surfaces which describe the external forms of the components of a close binary system have been calculated on the basis of evolutionary models. Theoretical systems have been considered allowing for a wide range of input parameters (masses and separation) and taking into account the evolutionary effects on the radii of the stars during their Main-Sequence lifetime. The systems have not undergone any transfer of matter and are representative of detached binaries with Main-sequence components. The ratios of the constants are confined in limited intervals and, for the highest values of the mass-ratios, they are clustered around the unit. (Auth.)

Intrabeam Scattering in the NLC Main Damping Rings

International Nuclear Information System (INIS)

Wolski, Andrzej

2006-01-01

We use Bane's approximation to the Bjorken-Mtingwa theory of intrabeam scattering to calculate the emittance growth as a function of bunch charge in the KEK ATF. We find that our results are consistent with the experimental data. We then calculate the emittance growth in the NLC Main Damping Rings using the same formulae; we allow for some uncertainty in the ATF data by using two different values for the Coulomb log factor in the formulae for the emittance growth rates. We find that despite the IBS emittance growth, it should still be possible to achieve the specified transverse and longitudinal emittances in the NLC Main Damping Rings at the specified bunch charge

49 CFR 229.31 - Main reservoir tests.

Science.gov (United States)

2010-10-01

... appropriately safe environment. (d) Each aluminum main reservoir before being placed in use and at intervals... working pressure fixed by the chief mechanical officer. The test date, place, and pressure shall be... be subjected to a hydrostatic pressure of at least 25 percent more than the maximum working pressure...

49 CFR 229.49 - Main reservoir system.

Science.gov (United States)

2010-10-01

... automatic air brake system shall be adjusted so that the compressor will start when the main reservoir..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Brake System § 229.49... least one safety valve that shall prevent an accumulation of pressure of more than 15 pounds per square...

Switchyard in the Main Injector era conceptual design report

International Nuclear Information System (INIS)

Brown, C.; Kobilarcik, T.; Lucas, P.; Malensek, A.; Murphy, C.T.; Yang, M.-J.

1997-08-01

This report presents elements of a design of the Switchyard and of the present fixed target beamlines in the era of the Main Injector (MI). It presumes that 800 GeV Tevatron beam will be transported to this area in the MI era, and permits it to share cycles with 120 GeV Main Injector beam if this option is desired. Geographically, the region discussed extends from the vicinity of AO to downstream points beyond which beam properties will be determined by the requirements of specific experiments. New neutrino lines not utilizing the present Switchyard (NuMI, BooNE) are not addressed. Similarly Main Injector beams upstream of AO are described fully in MI documentation and are unaffected by what is presented here. The timing both of the preparation of this report and of its recommendations for proceeding with construction relate to a desire to do required work in Transfer Hall and Enclosure B during the Main Injector construction shutdown (September 1997 - September 1998). As these areas are off-limits during any Tevatron operation, it is necessary for the fixed target program that work be completed here during this extended down period. The design presented here enables the operation of all beamlines in the manner specified in the current Laboratory plans for future fixed- target physics

New Horizons in C-F Activation by Main Group Electrophiles

Energy Technology Data Exchange (ETDEWEB)

Ozerov, Oleg V. [Texas A & M Univ., College Station, TX (United States). Dept. of Chemistry

2016-02-13

This technical report describes progress on the DOE sponsored project "New Horizons in C-F Activation by Main Group Electrophiles" during the period of 09/15/2010 – 08/31/2015. The main goal of this project was to develop improved catalysts for conversion of carbon-fluorine bonds in potentially harmful compounds. The approach involved combining of a highly reactive positively charged main-group compound with a highly unreactive negatively charged species (anions) as a way to access potent catalysts for carbon-fluorine bond activation. This report details progress made in improving synthetic pathways to a variety of new anions with improved properties and analysis of their potential in catalysis.

The Main Properties of q-Functions

OpenAIRE

Nina O. Virchenko; Olena V. Ovcharenko

2017-01-01

Background.  The new generalization of the function of complex variable (q-function) is considered, its main properties are investigated. Such distributions have a special place among the special functions due to their widespread use in many areas of applied mathematics. Objective. The aim of the paper is to study the new generalization of the function of complex variable for application in applied sciences. Methods. To obtain scientific results the general methods of the mathematical a...

Post-main-sequence planetary system evolution

Science.gov (United States)

Veras, Dimitri

2016-01-01

The fates of planetary systems provide unassailable insights into their formation and represent rich cross-disciplinary dynamical laboratories. Mounting observations of post-main-sequence planetary systems necessitate a complementary level of theoretical scrutiny. Here, I review the diverse dynamical processes which affect planets, asteroids, comets and pebbles as their parent stars evolve into giant branch, white dwarf and neutron stars. This reference provides a foundation for the interpretation and modelling of currently known systems and upcoming discoveries. PMID:26998326

The main problems faced Ukraine in case of low-carbon economy

Directory of Open Access Journals (Sweden)

Artemenko L. P.

2015-05-01

Full Text Available The article presents main thoughts covering the process of implementation of low-carbon economy principles in Ukraine, presented main problems towards this aim and proposes one of the main steps to be taken on this long-term way. In case of the damaged limit of the natural recourses to be developed in Ukraine nowadays (especially gas, oil, coil, etc., lost of competitive position on international market to be always placed by Ukrainian manufactories, disability to cut the value of carbon gases and then, as a result, disability to ensure Ukrainian obligations by the Kyoto protocol, Ukrainian Government needs to find better solution for solving the problems mentioned above. In this case we should take into account that the main part of these problems appeared in case of the low-carbon economy movement in the world. As we declare our desire to be next to the leaders countries, than we have to find solutions for our problems based on the main international best practices.

14 CFR 23.529 - Hull and main float landing conditions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float landing conditions. 23... Water Loads § 23.529 Hull and main float landing conditions. (a) Symmetrical step, bow, and stern... directed perpendicularly to the keel line. (b) Unsymmetrical landing for hull and single float seaplanes...

Main ring transition crossing simulations

International Nuclear Information System (INIS)

Kourbanis, I.; Ng, King-Yuen.

1990-10-01

We used ESME to simulate transition crossing in the Main Ring (MR). For the simulations, we followed the MR 29 cycle used currently for bar p production with a flat top of 120 GeV. In Sect. II, some inputs are discussed. In Sect. III, we present simulations with space charge turned off so that the effect of nonlinearity can be studied independently. When space charge is turned on in Sect. IV, we are faced with the problem of statistical errors due to binning, an analysis of which is given in the Appendices. Finally in Sects. V and VI, the results of simulations with space charge are presented and compared with the experimental measurements. 7 refs., 6 figs

Simultaneous determination of ten compounds in two main ...

African Journals Online (AJOL)

Simultaneous determination of ten compounds in two main medicinal plant parts of Tibetan herb, Pterocephalus hookeri (CB Clarke) Höeck, by ultra-high performance liquid chromatography-photodiode array.

Travel ticket sales optimization at Prague Main Railway Station

OpenAIRE

Kuběnová, Eva

2010-01-01

This Master's Thesis concerns the travel ticket sales at Prague Main Railway Station. Based on a detailed analysis of provided data, its aim is to put forward suggestions on how to optimize travel ticket sales. Through evaluating the volume of travel tickets sold within the given time period and the number of open cash-desks, along with a cost analysis of sales channels, this thesis reaches its final conclusions. Microsoft Excel was the main analysis tool for compiling graphs. A sound knowled...

Main tributary influence on the River Vardar water quantity

International Nuclear Information System (INIS)

Unevska, Blaga; Stojov, Vasko; Milevski, Josif

2004-01-01

Hydrology in all catchments is defined like complex of geophysics and hydro-geologic parameters. Regular defining on the hydrological parameters is essential for planning, improving and developing management on every country. The main aim of this topic is to demonstrate disparity disposal on water resources in Republic of Macedonia depending on the different catchments areas. Here will be talk about different percentage of tributaries, which have influence on river Vardar. River Vardar is main recipient on water in Macedonia.(Author)

ANALYSIS AND SIMULATION OF MAIN MAGNET TRANSMISSION LINE EFFECT

Energy Technology Data Exchange (ETDEWEB)

ZHANG,W.; MARNERIS, I.; SANDBERG, J.

2007-06-25

A main magnet chain forms a pair of transmission lines. Pulse-reflection-caused voltage and current differentiation throughout the magnet chain can have adverse effect on main magnet field quality. This effect is associated with magnet system configuration, coupling efficiency, and parasitic parameters. A better understanding of this phenomenon will help us in new design and existing system upgrade. In this paper, we exam the transmission line effect due to different input functions as well as configuration, coupling, and other parameters.

Tracing Technological Development Trajectories: A Genetic Knowledge Persistence-Based Main Path Approach.

Directory of Open Access Journals (Sweden)

Hyunseok Park

Full Text Available The aim of this paper is to propose a new method to identify main paths in a technological domain using patent citations. Previous approaches for using main path analysis have greatly improved our understanding of actual technological trajectories but nonetheless have some limitations. They have high potential to miss some dominant patents from the identified main paths; nonetheless, the high network complexity of their main paths makes qualitative tracing of trajectories problematic. The proposed method searches backward and forward paths from the high-persistence patents which are identified based on a standard genetic knowledge persistence algorithm. We tested the new method by applying it to the desalination and the solar photovoltaic domains and compared the results to output from the same domains using a prior method. The empirical results show that the proposed method can dramatically reduce network complexity without missing any dominantly important patents. The main paths identified by our approach for two test cases are almost 10x less complex than the main paths identified by the existing approach. The proposed approach identifies all dominantly important patents on the main paths, but the main paths identified by the existing approach miss about 20% of dominantly important patents.

Politics and Politicians – Main Topic and Main Characters on Television News

Directory of Open Access Journals (Sweden)

Viktorija Car

2010-01-01

Full Text Available The paper examines the relationship between television as a medium, and politics and politicians as the content of television news in Croatia. The first part of the paper explains the models of ‘media logic’, ‘partisan logic’ and ‘party logic’. The second part of the paper presents the results of the research conducted on the representative sample of primetime news HTV Dnevnik for the period 1991-2009, and Nova TV Dnevnik and RTL Vijesti for the period 2005-2009. The goal of the research was to examine the presence of political topics on primetime news, as well to what extent politicians are presented as main characters. The results show a sustained decline of politics on the news and their simultaneous replacement by news on disasters and lifestyle. Further, citizens and their opinion become more important than opinions of politicians, experts and scientists. Comparing the news on public service television and on commercial televisions, the author elaborates on the internal processes and changes of the television medium and finally introduces the concept of ‘power logic’ to explain news selection and news editing on the Croatian TV channels.

14 CFR 23.531 - Hull and main float takeoff condition.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float takeoff condition. 23.531 Section 23.531 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Water Loads § 23.531 Hull and main float takeoff condition. For the wing and its attachment to the hull...

14 CFR 25.527 - Hull and main float load factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float load factors. 25.527... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Water Loads § 25.527 Hull and main... 1=empirical hull station weighing factor, in accordance with figure 2 of appendix B. (7) r x=ratio...

Function analysis and function assignment of NPP advanced main control room

International Nuclear Information System (INIS)

Zheng Mingguang; Xu Jijun

2001-01-01

The author addresses the requirements of function analysis and function assignment, which should be carried out in the design of main control room in nuclear power plant according to the design research of advanced main control room, then states its contents, functions, importance and necessity as well as how to implement these requirements and how to do design verification and validation in the design of advanced main control room of nuclear power plant

Enhancing training in the main control room

International Nuclear Information System (INIS)

McGuigan, K.; O'Leary, K.; Canavan, K.

2004-01-01

In 2003 Pickering B Nuclear of Ontario Power Generation installed a Desktop Simulator (DTS) in the Main Control Room (MCR) for training purposes. This paper will outline why this training enhancement was undertaken and the approach taken to secure its use in an active MCR environment while minimizing distractions to plant operations. (author)

Linking main-belt comets to asteroid families

Science.gov (United States)

Novakovic, B.; Hsieh, H. H.; Cellino, A.

2012-09-01

Here we present our results obtained by applying different methods in order to establish a firm link between the main-belt comets (MBCs) and colisionally-formed asteroid families (AFs), i.e, to possibly find additional line of evidence supporting the hypothesis that MBCs may be preferentially found among the members of young AFs.

Main data - RMG | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...ftp://ftp.biosciencedbc.jp/archive/rmg/LATEST/rmg_main.zip File size: 1 KB Simple search URL http://togodb.b... This Database Database Description Download License Update History of This Database Site Policy | Contact Us Main data - RMG | LSDB Archive ...

Use of Main Loop Isolating Valves (GZZS) in WWER 440

International Nuclear Information System (INIS)

Stefanova, A.E.; Gencheva, R.V.; Groudev, P.P.

2002-01-01

This paper discusses the usage of Main Loop Isolation Valves in case of Steam Generator Tube Rupture accident in WWER440/V230. A double-ended single pipe break in SG-6 was chosen as representative. In the paper are investigated two cases. In the first one the operator isolates the affected loop by Main Loop Isolation Valves closing and after primary depressurization re-opens them to cooldown the damaged Steam Generator. The second case treats the situation, where Main Loop Isolation Valves fail to close with the necessary operator actions for managing plant recovery. RELAP5/MOD3.2 computer code has been used to simulate the Steam Generator Tube Rupture accident in WWER440 NPP model. This model was developed and validated at Institute for Nuclear Research and Nuclear Energy - Bulgarian Academy of Sciences. The results of analyses presented in this report demonstrate that in the both cases (with or without Main Loop Isolation Valves usage) the operator could bring the plant to stable and safety conditions (Authors)

Integrated Main Propulsion System Performance Reconstruction Process/Models

Science.gov (United States)

Lopez, Eduardo; Elliott, Katie; Snell, Steven; Evans, Michael

2013-01-01

The Integrated Main Propulsion System (MPS) Performance Reconstruction process provides the MPS post-flight data files needed for postflight reporting to the project integration management and key customers to verify flight performance. This process/model was used as the baseline for the currently ongoing Space Launch System (SLS) work. The process utilizes several methodologies, including multiple software programs, to model integrated propulsion system performance through space shuttle ascent. It is used to evaluate integrated propulsion systems, including propellant tanks, feed systems, rocket engine, and pressurization systems performance throughout ascent based on flight pressure and temperature data. The latest revision incorporates new methods based on main engine power balance model updates to model higher mixture ratio operation at lower engine power levels.

Smart Grids: short history, main components and perspectives

International Nuclear Information System (INIS)

Belhomme, R.; Maire, J.

2010-01-01

This paper tries to describe the smart grids in their entirety. In a first part, two definitions are given for the smart grids, the main drivers for their development are briefly described, along with an overview of the initiatives and projects in different parts of the world: Europe, USA, Asia and Pacific area. The second part is devoted to the main components of the smart grids. The following are considered: distributed generation and renewables, energy storage, demand side integration, intelligent buildings, smart meters, communication infrastructures, distribution and transmission networks, micro-grids, flexibility of the generation park, electric vehicles and regulatory issues. Finally, the conclusion gives a short discussion of some important issues, as well as of the benefits of demonstration projects. (authors)

The main aspects of the Vivitron mechanical structure

International Nuclear Information System (INIS)

Gaudiot, G.; Koenig, R.; Esteve, T.; Peter, R.; Strebel, A.

1989-05-01

The main aspects of the Vivitron mechanical structure are discussed through a description of the tank and the internal structure. The results of the calculated constraints on the structure are presented

Influence factors analysis of water environmental quality of main rivers in Tianjin

Science.gov (United States)

Li, Ran; Bao, Jingling; Zou, Di; Shi, Fang

2018-01-01

According to the evaluation results of the water environment quality of main rivers in Tianjin in 1986-2015, this paper analyzed the current situation of water environmental quality of main rivers in Tianjin retrospectively, established the index system and multiple factors analysis through selecting factors influencing the water environmental quality of main rivers from the economy, industry and nature aspects with the combination method of principal component analysis and linear regression. The results showed that water consumption, sewage discharge and water resources were the main factors influencing the pollution of main rivers. Therefore, optimizing the utilization of water resources, improving utilization efficiency and reducing effluent discharge are important measures to reduce the pollution of surface water environment.

14 CFR 23.527 - Hull and main float load factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and main float load factors. 23.527... Water Loads § 23.527 Hull and main float load factors. (a) Water reaction load factors nw must be...=seaplane landing weight in pounds. (6) K1=empirical hull station weighing factor, in accordance with figure...

Observing environmental change in of the Gulf of Maine: ICUC smartphone app

Science.gov (United States)

Want to help collect data on environmental change in the Gulf of Maine with your smartphone? The Gulf of Maine Council’s EcoSystem Indicator Partnership (ESIP) is growing the community of citizen scientists in the Gulf of Maine region through its new smartphone app: ICUC (...

Evaluation of Tracheal and Main Bronchial Diverticula Using Thin-Section MDCT

Energy Technology Data Exchange (ETDEWEB)

Jou, Sung Shick; Kim, Young Tong; Bae, Won Kyung; Kim, Il Yung; Kim, Hyung Hwan; Han, Jong Kyu [Soonchunhyang University Cheonan Hospital, Cheonan (Korea, Republic of)

2010-02-15

To evaluate the characteristics of tracheal and main bronchial diverticula in relation with emphysema. A total of 967 CT images were reconstructed with 1.25 mm axial images over 2 months. The incidence, size, number, and location of the tracheal and main bronchial diverticula were analyzed using 3D medical software (Seoul, Korea). The incidence of emphysema and the relationship between emphysema and the size of the diverticula were analyzed. In total, 50 patients (5.1%) showed tracheal diverticula in the right posterolateral wall. In addition, 51 patients (5.2%) showed 89 (9.4%) main bronchial diverticula in the inferior wall, while 68 (72%) showed diverticula in the left posterolateral wall. Tracheal diverticula (6.4 {+-} 5.0 mm, 1.0 {+-} 0.2) were larger and fewer than the main bronchial diverticula (2.1 {+-} 2.0 mm, 1.8 {+-} 1.6) (p<0.05). Moreover, tracheal diverticula (10.3 {+-} 7.4 mm) with emphysema in 13 patients (26%), were larger than those without emphysema (5.1 {+-} 3.0 mm) (p<0.05). On thin-section MDCT, the rates of incidence for tracheal and main bronchial diverticula are about 5%, respectively. Tracheal diverticula in the right posterolateral wall are smaller and fewer than the main bronchial diverticula, which are located primarily in the inferior wall of the left bronchus. Tracheal diverticula with emphysema are larger than those without emphysema.

Three-dimensional tolerance investigation on main ITER components

International Nuclear Information System (INIS)

Reich, J.; Chiocchio, S.; Cordier, J.-J.; Gallix, R.; Guerin, O.; Halcrow, T.

2009-01-01

ITER has to focus on all processes that ensure the permanent consistency between the requirements of ITER and the performance attributes of its components. This includes integration tolerance studies. One of the main goals of this work is to establish a sufficient tolerance scheme for all main components. The investigation in sufficient tolerance studies at a very early stage of the project will result in cost savings during the installation process. Due to the complexity of the ITER components and their several interfaces to their surroundings, it is advantageous to perform tolerance studies with a specialised tool like 'three-dimensional control systems' (3DCS) that is compatible with the ITER CATIA-V5 CAD engineering system and Enovia PRC environment. On single components (e.g. Magnet TF Coils) detailed two-dimensional tolerance schemes have been developed from the beginning. Using them as a starting point, functional or key interface tolerances have to be defined. Furthermore the tolerance studies have to consider the different configurations of each component (e.g. manufacturing stages, assembly plan, integration with surrounding, operation conditions). Especially for assembly it is necessary to analyse the final ranges which have to be achieved during the installation process. From the integration point of view, the key tolerances of all main in-cryostat ITER components have to be brought together in a complete and consistent manner.

Trees or Grids? Indexing Moving Objects in Main Memory

DEFF Research Database (Denmark)

Sidlauskas, Darius; Saltenis, Simonas; Christiansen, Christian Winther

2009-01-01

New application areas, such as location-based services, rely on the efficient management of large collections of mobile objects. Maintaining accurate, up-to-date positions of these objects results in massive update loads that must be supported by spatial indexing structures and main-memory indexes...... are usually necessary to provide high update performance. Traditionally, the R-tree and its variants were used for indexing spatial data, but most of the recent research assumes that a simple, uniform grid is the best choice for managing moving objects in main memory. We perform an extensive experimental...

Main results of the German risk study - phase B

International Nuclear Information System (INIS)

Heuser, F.W.

1987-01-01

To start the author introduces briefly some comments on main tasks and objectives of risk analysises which at least after the Chernobyl accident should be emphasized more explicitly. Following on some main results of the system - and accident event tree analysis of the German Risk Study, Phase B, are summarized. The second part of this paper deals with the analysis of core melt accidents performed in context of the study. Hetero investigations on the hydrogen problem and investigations on containment venting after a core melt accident will be discussed in more detail

Operation Aspect of the Main Control Room of NPP

International Nuclear Information System (INIS)

Sahala M Lumbanraja

2009-01-01

The main control room of Nuclear Power Plant (NPP) is operational centre to control all of the operation activity of NPP. NPP must be operated carefully and safely. Many aspect that contributed to operation of NPP, such as man power whose operated, technology type used, ergonomic of main control room, operational management, etc. The disturbances of communication in control room must be anticipated so the high availability of NPP can be achieved. The ergonomic of the NPP control room that will be used in Indonesia must be designed suitable to anthropometric of Indonesia society. (author)

Design of SMART alarm system using main memory database

International Nuclear Information System (INIS)

Jang, Kue Sook; Seo, Yong Seok; Park, Keun Oak; Lee, Jong Bok; Kim, Dong Hoon

2001-01-01

To achieve design goal of SMART alarm system, first of all we have to decide on how to handle and manage alarm information and how to use database. So this paper analyses concepts and deficiencies of main memory database applied in real time system. And this paper sets up structure and processing principles of main memory database using nonvolatile memory such as flash memory and develops recovery strategy and process board structures using these. Therefore this paper shows design of SMART alarm system is suited functions and requirements

Regional Ocean Modeling System (ROMS): Main Hawaiian Islands

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the main Hawaiian islands at approximately 4-km resolution. While...

Space transportation main engine reliability and safety

Science.gov (United States)

Monk, Jan C.

1991-01-01

Viewgraphs are used to illustrate the reliability engineering and aerospace safety of the Space Transportation Main Engine (STME). A technology developed is called Total Quality Management (TQM). The goal is to develop a robust design. Reducing process variability produces a product with improved reliability and safety. Some engine system design characteristics are identified which improves reliability.

Results on Fermilab main injector dipole measurements

International Nuclear Information System (INIS)

Brown, B.C.; Baiod, R.; DiMarco, J.; Glass, H.D.; Harding, D.J.; Martin, P.S.; Mishra, S.; Mokhtarani, A.; Orris, D.F.; russell, O.A.; Tompkins, J.C.; Walbridge, D.G.C.

1995-06-01

Measurements of the Productions run of Fermilab Main Injector Dipole magnets is underway. Redundant strength measurements provide a set of data which one can fit to mechanical and magnetic properties of the assembly. Plots of the field contribution from the steel supplement the usual plots of transfer function (B/I) vs. I in providing insight into the measured results

Posterior fossa malformations: main features and limits in prenatal diagnosis

Energy Technology Data Exchange (ETDEWEB)

Garel, Catherine [Hopital d' Enfants Armand-Trousseau, Department of Radiology, Paris (France)

2010-06-15

Posterior fossa (PF) malformations are commonly observed during prenatal screening. Their understanding requires knowledge of the main steps of PF development and knowledge of normal patterns in US and MR imaging. The vast majority of PF malformations can be strongly suspected by acquiring a midline sagittal slice and a transverse slice and by systematically scrutinizing the elements of the PF: cerebellar vermis, hemispheres, brainstem, fourth ventricle, PF fluid spaces and tentorium. Analysis of cerebellar echogenicity and biometry is also useful. This review explains how to approach the diagnosis of the main PF malformations by performing these two slices and answering six key questions about the elements of the PF. The main imaging characteristics of PF malformations are also reviewed. (orig.)

Mains-solidarity and the right to direct connection

International Nuclear Information System (INIS)

Baumann, P.

2006-01-01

This article takes a look at a particular aspect of Swiss electricity-market liberalisation i.e. the right of a particular consumer to be fed with electricity via a direct connection running parallel to the normal mains and grid infrastructure. Various aspects of such a configuration are looked at, including the question of solidarity with other consumers. The current situation in Switzerland is looked at. Here, some large customers are striving to be fed by defined suppliers over a higher grid level in order to reduce costs. The situation is analysed from the point of view of general supply and solidarity with other customers. Basic rulings already made in this area are looked at and models for the calculation of mains-usage fees are discussed. Legal aspects and existing legislation are looked at

Additional measurements of pre-main-sequence stellar rotation

International Nuclear Information System (INIS)

Hartmann, L.; Stauffer, J.R.

1989-01-01

New rotational-velocity measurements for pre-main-sequence stars in the Taurus-Auriga molecular cloud are reported. Rotational velocities or upper limits of 10 km/s are now available for 90 percent of the T Tauri stars with V less than 14.7 in the catalog of Cohen and Kuhi. Measurements of 'continuum emission' stars, thought to be accreting high-angular-momentum material from a circumstellar disk, show that these objects are not especially rapid rotators. The results confirm earlier findings that angular-momentum loss proceeds very efficiently in the earliest stages of star formation, and suggest that stars older than about one million yr contract to the main sequence at nearly constant angular momentum. The slow rotation of T Tauri stars probably requires substantial angular-momentum loss via a magnetically coupled wind. 35 references

75 FR 21979 - NRC Region II Address and Main Telephone Number Changes

Science.gov (United States)

2010-04-27

... Region II Address and Main Telephone Number Changes AGENCY: Nuclear Regulatory Commission. ACTION: Final... address for its Region II office and to update the main telephone number. The Region II office move and... update the NRC Region II office street address and office main telephone number. The physical location of...

Redesigning Main Streets in Small Communities: The Viagra of Transportation Investment

Science.gov (United States)

1998-09-16

The national Main Street movement is building momentum. Over 1,200 small : communities across America have rediscovered their Main Streets with impressive : investment in time, energy and money. The tangible measures of return include: : economic gro...

In-service inspection robot for PFBR main vessel- concept

Energy Technology Data Exchange (ETDEWEB)

Rajendran, S; Ramakumar, M S [Bhabha Atomic Research Centre, Mumbai (India). Div. of Remote Handling and Robotics

1994-12-31

In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs.

In-service inspection robot for PFBR main vessel- concept

International Nuclear Information System (INIS)

Rajendran, S.; Ramakumar, M.S.

1994-01-01

In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs

Main gas circulator for VG-400 reactor plant

International Nuclear Information System (INIS)

Mitenkov, F.M.; Kostin, V.I.; Novinskij, E.G.; Kuropatov, A.I.; Protsenko, A.N.; Smirnov, V.P.; Stolyarevskij, A.Ya.

1988-01-01

Principle parameters and operating conditions of the main gas circulator (MGC) in VG-400 reactor plant are presented. Brief MGC design description and experimental work scope are given. (author). 4 refs, 4 figs, 1 tab

Breakdown of air pockets in downwardly inclined sewerage pressure mains.

Science.gov (United States)

Lubbers, C L; Clemens, F H L R

2006-01-01

In the Netherlands, wastewater is collected in municipal areas and transported to centralised WWTPs by an extensive system of pressure mains. Over the last decades these pressure mains did not receive much attention in terms of monitoring of performance or maintenance. A recent inventory showed that half of the pressure mains show an increased pressure loss for no directly obvious reason. One of the many causes that account for the reduction of the flow capacity is the occurrence of free gas in the pipeline. During dry weather periods with low flow velocities, gas may accumulate at high points in the system. Once the velocity increases during storm weather flow, the air pockets may be broken down and transported to the end of the system. A research study is started focussing on the description of the gas-water phenomena in wastewater pressure mains with respect to transportation of gas. An experimental facility is constructed for the study of multi-phase flow. This paper describes the preliminary results of experiments on breakdown rates of gas pockets as a function of inclination angle and water flow rate. The results show an increasing breakdown rate with increasing inclination angle.

Forecasting optimal duration of a beer main fermentation process using the Kalman filter

OpenAIRE

Niyonsaba T.; Pavlov V.A.

2016-01-01

One of the most important processes of beer production is the main process of fermentation. In this process, the wort transforms into beer. The quality of beer depends on the dynamics of wort parameters. The main fermentation process continues for 10 days and requires high costs. Therefore, the main purpose of this article is to forecast the optimal duration of the beer main fermentation process and provide its optimal control. The Kalman filter can provide optimal control of the main ferment...

Water Hammer in Pumped Sewer Mains

DEFF Research Database (Denmark)

Larsen, Torben

of transients in pumped pipeline systems. This present publication can be understood as the second and revised edition of the pamphlet ”Transients in pumped sewer mains” (2006) which was published as a technical report by The EVA committee under The Danish Water Pollution Committee (The Danish Society......This publication is intended for students and engineers seeking an introduction to the problem of water transients in pumped sewer and water mains. This is a subject of increasing interest because of the development of larger and more integrated systems. Consideration of transients is essential...

Additively Manufactured Main Fuel Valve Housing

Science.gov (United States)

Eddleman, David; Richard, Jim

2015-01-01

Selective Laser Melting (SLM) was utilized to fabricate a liquid hydrogen valve housing typical of those found in rocket engines and main propulsion systems. The SLM process allowed for a valve geometry that would be difficult, if not impossible to fabricate by traditional means. Several valve bodies were built by different SLM suppliers and assembled with valve internals. The assemblies were then tested with liquid nitrogen and operated as desired. One unit was also burst tested and sectioned for materials analysis. The design, test results, and planned testing are presented herein.

REDDY MAIN BELT ASTEROID SPECTRA V1.0

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains low-resolution (R~150) near-infrared (0.7-2.5 microns) spectra of 90 main belt asteroids observed with the SpeX instrument on the NASA...

Gulf of Maine Cooperative Bottom Longline Survey Database

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This database is for a bottom longline (fixed gear) survey executed in the western and central Gulf of Maine targeting complex rocky habitats. The survey is operated...

Natural vibration experimental analysis of Novovoronezhskaya NPP main building

International Nuclear Information System (INIS)

Zoubkov, D.; Isaikin, A.; Shablinsky, G.; Lopanchuk, A.; Nefedov, S.

2005-01-01

1. Natural vibration frequencies are main characteristics of buildings and structures which allow to give integral estimation of their in-service state. Even relatively small changes of these frequencies as compared to the initially registered values point to serious defects of building structures. In this paper we analyzed natural vibration frequencies and natural modes of the main building (MB) of Novovoronezhskaya NPP operating nuclear unit with WWER-440 type reactor. The MB consists of a reactor compartment (RC), a machine room (MR) and an electric device (ED) unit positioned in between. 2. Natural vibration frequencies and natural modes of the MB were determined experimentally by analyzing its microvibrations caused by operation of basic equipment (turbines, pumps, etc.). Microvibrations of the main building were measured at 12 points. At each point measurements were carried out along two or three mutually perpendicular vibration directions. Spectral analysis of vibration records has been conducted. Identification of natural vibration frequencies was carried out on the basis of the spectral peaks and plotted vibration modes (taking into account operating frequencies of the basic equipment of the power generating unit). On the basis of the measurement results three transverse modes and corresponding natural vibration frequencies of the MB, one longitudinal mode and corresponding natural vibration frequency of the MB and two natural frequencies of vertical vibrations of RC and MR floor trusses (1st and 2nd symmetric forms) were determined. Dynamic characteristics of the main building of NV NPP resulting from full scale researches are supposed to be used as one of building structure stability criteria. (authors)

Dark current and radiation shielding studies for the ILC main linac

Energy Technology Data Exchange (ETDEWEB)

Mokhov, Nikolai V. [Fermilab; Rakhno, I. L. [Fermilab; Solyak, N. A. [Fermilab; Sukhanov, A. [Fermilab; Tropin, I. S. [Fermilab

2016-12-05

Electrons of dark current (DC), generated in high-gradient superconducting RF cavities (SRF) due to field emission, can be accelerated up to very high energies—19 GeV in the case of the International Linear Collider (ILC) main linac—before they are removed by focusing and steering magnets. Electromagnetic and hadron showers generated by such electrons can represent a significant radiation threat to the linac equipment and personnel. In our study, an operational scenario is analysed which is believed can be considered as the worst case scenario for the main linac regarding the DC contribution to the radiation environment in the main linac tunnel. A detailed modelling is performed for the DC electrons which are emitted from the surface of the SRF cavities and can be repeatedly accelerated in the high-gradient fields in many SRF cavities. Results of MARS15 Monte Carlo calculations, performed for the current main linac tunnel design, reveal that the prompt dose design level of 25 μSv/hr in the service tunnel can be provided by a 2.3-m thick concrete wall between the main and service ls.

Main summaries of construction of the Rovno NPP third unit

International Nuclear Information System (INIS)

Smoktij, I.P.; Tsetsenko, I.K.

1987-01-01

The main technical and economic indices attained at the Rovno and Zaporozhe NPPs are considered. The estimated costs of the main installations of the building site, organizations participating in construction, labor forces at different building sections, duration of different stages of construction, actual labor costs associated with the reactor unit, volumes of construction and installation work, the construction schedule for the Rovno Unit-3 are given

Main principles of development stationary training facilities

International Nuclear Information System (INIS)

Tsiptsyura, R.D.

1986-01-01

The designation of stationary training facilities is shown and the main requirements for them are formulated. When considering the above-mentioned requirements, special attention was paid to obligatory correspondence between training experience and practical skill of an operator. It is shown, that the switchboard block is the major unit of the training facility, which should develop skills and habits of an operator

VINKA, ten years on. Main scientific results

International Nuclear Information System (INIS)

1979-01-01

The VINKA facility in the TRITON swimming-pool reactor at Fontenay-aux-Roses allows the irradiation of solids at low temperatures in order to study crystalline defects. After ten years of operation the main scientific results obtained in the fields of creep and growth (chapter I), point defects (chapter II), amorphisation (chapter III) and dechanneling of particles (chapter IV) are summarised [fr

COMPETENCE-BASED APPROACH TO MODELLING STRUCTURES OF THE MAIN EDUCATIONAL PROGRAM

Directory of Open Access Journals (Sweden)

V. A. Gerasimova

2015-01-01

Full Text Available By the analysis results of scientific works in the field of competence-based approach in education authors proved need of computer support of the planning and development stage of the main educational program, they developed the main educational program structure automatic formation model on the graphs basis, offered the integrated criterion of an discipline assessment and developed a strategic map of a discipline complex assessment. The executed theoretical researches are a basis for creation of the main educational program planning and development support automated system.

Main-Memory Operation Buffering for Efficient R-Tree Update

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard; Saltenis, Simonas; Biveinis, Laurynas

2007-01-01

the buffering of update operations in main memory as well as the grouping of operations to reduce disk I/O. In particular, operations are performed in bulk so that multiple operations are able to share I/O. The paper presents an analytical cost model that is shown to be accurate by empirical studies...... the main memory that is indeed available, or do not support some of the standard index operations. Assuming a setting where the index updates need not be written to disk immediately, we propose an R-tree-based indexing technique that does not exhibit any of these drawbacks. This technique exploits...

Predicting water main failures using Bayesian model averaging and survival modelling approach

International Nuclear Information System (INIS)

Kabir, Golam; Tesfamariam, Solomon; Sadiq, Rehan

2015-01-01

To develop an effective preventive or proactive repair and replacement action plan, water utilities often rely on water main failure prediction models. However, in predicting the failure of water mains, uncertainty is inherent regardless of the quality and quantity of data used in the model. To improve the understanding of water main failure, a Bayesian framework is developed for predicting the failure of water mains considering uncertainties. In this study, Bayesian model averaging method (BMA) is presented to identify the influential pipe-dependent and time-dependent covariates considering model uncertainties whereas Bayesian Weibull Proportional Hazard Model (BWPHM) is applied to develop the survival curves and to predict the failure rates of water mains. To accredit the proposed framework, it is implemented to predict the failure of cast iron (CI) and ductile iron (DI) pipes of the water distribution network of the City of Calgary, Alberta, Canada. Results indicate that the predicted 95% uncertainty bounds of the proposed BWPHMs capture effectively the observed breaks for both CI and DI water mains. Moreover, the performance of the proposed BWPHMs are better compare to the Cox-Proportional Hazard Model (Cox-PHM) for considering Weibull distribution for the baseline hazard function and model uncertainties. - Highlights: • Prioritize rehabilitation and replacements (R/R) strategies of water mains. • Consider the uncertainties for the failure prediction. • Improve the prediction capability of the water mains failure models. • Identify the influential and appropriate covariates for different models. • Determine the effects of the covariates on failure

The design of trachea-main bronchial covered embranchment stent and the primary clinical application

International Nuclear Information System (INIS)

Han Xinwei; Wu Gang; Gao Xuemei; Li Yongdong; Wang Yanli; Ma Nan

2004-01-01

Objective: To design the trachea-main bronchus covered embranchment stent and study the primary treatment for thoracostomach main bronchial fistula and main bronchial stenosis. Methods: The stent was designed on the bases of the peculiar anatomic structure and the pathological changes of thoracostomach-main bronchial fistula and main bronchial stenosis. Under the fluoroscopic guidance, implantations were carried out in thoracostomach-carina fistula 1 case thoracostomach-left main bronchial fistula 1, thoracostomach-right main bronchial fistula and left main bronchial stenosis 1 case, altogether with 5 stents. Results: Stents were placed successfully, not only improving the breathing and living quality but also completing the closure of the ora of the thoracostomach-airway fistula with further vanishing of the choke after drinking and eating together with the inhalation pneumonia. The bronchus became normal in a main bronchial stenosis after the stent was taken out. Conclusions: Trachea-main bronchial covered embranchment stent could be used to close thoracostomach-airway fistula and to treat main bronchial benign/malignant stenosis. The procedure is simple and safe. (authors)

Banded ion morphology - main and recovery storm phases

International Nuclear Information System (INIS)

Frahm, R.A.; Reiff, P.H.; Winningham, J.D.; Burch, J.L.

1986-01-01

The occurrence of bands in ion spectra obtained with the high-altitude and low-altitude plasma instruments on DE-1 and DE-2, respectively, during main and recovery storm phases from the period September 1981 - January 1982 is analyzed statistically. Typical spectra are shown; diagrams and graphs of storm morphology are provided; and two theoretical models (one based on time-of-flight effects and another based on convective dispersion) are discussed. It is found that bands occur more often in the main phase than in the recovery phase, and more often and at higher latitudes in the evening than before noon. From the stability of the bands and the dependence of energy on latitude it is inferred that convective dispersion plays a more important role than time-of-flight effects in the motion of heavy ions in the magnetosphere. 14 references

Simulating the transient regime for main condensate system at Cernavoda NPP

International Nuclear Information System (INIS)

Nita, Iulian; Gheorghiu, Mihai; Prisecaru, Ilie; Dupleac, Daniel

2005-01-01

The purpose of this project is to make a Thermal Hydraulic Analysis of Main Condensate System for getting real-time answer of installation during regimes occurring during normal and abnormal operation. To obtain the analyses the MMS code was used. The boundaries of the systems analysis are extended to Main Feedwater System in order to get a realistic response of Deaerator equipment which are situated between those two systems and have entrances from both systems. In this way we made a complex analysis with main condenser and steam generators as boundaries. We obtained a model for the entire chain of condensate and feedwater preheater with interface just turbine bleed steam. From that we could reduce the number of assumptions necessary to make the analysis. The analyses consist in hydraulics and thermal hydraulics analyses, respectively. For the first case analysed are: - the nominal operation regime with main condensate pumps; - start-up regime with total circulate of condensate to condenser; - 25% MCR (Maximum Continuous Rate) regime (this regime was used in designing the condensate regulating valves at low flow; - 40% MCR regime (with circulate of some condensate flow to condenser); - operating regime of 60% MCR with one main condensate pump operating; - operating regime with auxiliary condensate pump; - operating regime with discharging a condensate flow to condensate storage tank. The thermal hydraulic analyses deal with normal and abnormal operating regimes, respectively. In the first case analysed are the following regimes: - nominal operating regime with main condensate pump operating 100% MCR; - transient regime, 100-80% MCR; - transient regime, 100-80-60% MCR with two pumps in operation and 60 % MCR with one main condensate pump in operation; - transient regime, 100-80-60-60-40 % MCR; - shut-down regime; - start-up regime from Hot zero power to rated power regime. Finally, for the abnormal operating regimes the analyses concerned: - transient regime 100

Water Budget formulation for Ahmadu Bello University, main ...

African Journals Online (AJOL)

PROF HORSFALL

.info and www.bioline.org.br/ja. Water Budget formulation for Ahmadu Bello University, main Campus as a Water. Resources ... fine/coarse Member, Older Alluvial aquifer .... calculated as rainfall recharge, at the depth of rainfall of 1,100 mm/a, ...

Space shuttle main engine vibration data base

Science.gov (United States)

Lewallen, Pat

1986-01-01

The Space Shuttle Main Engine Vibration Data Base is described. Included is a detailed description of the data base components, the data acquisition process, the more sophisticated software routines, and the future data acquisition methods. Several figures and plots are provided to illustrate the various output formats accessible to the user. The numerous vibration data recall and analysis capabilities available through automated data base techniques are revealed.

Energy modeling: nuclear energy as China's main energy after 2040

International Nuclear Information System (INIS)

Guo Xingqu

1987-01-01

According to the energy modeling and the strategic forecast of China's economic development and population, the energy demand in China in the coming century has been calculated yearly by computer simulation. It is shown by the calculation results that the primary energy consumption in 2050 will be 3.37-4.25 times as that of 2000. The fossil energy will still be the main energy during the early stage of 21st century, but it will be cut down rapidly since 2020s as its annual consumption is increased to 1.656-2.044 x 10 9 tce/a. Because the fossil fuel ressources in China are limited, more and more fossil fuel will be mainly turned to chemical products, and the environmental pollution will be serious if we still use the fossil as a main fuel widely. The amount of renewable energy will be increasing, but its share in the primary energy consumption will be cut down from 36% to about 20% during the first half of next century and then will maintain this portion. In this case, the nuclear energy will be developed rapidly during the early stage of next century and will become the main energy since 2040. The methodology of energy forecast has also been reviewed

Main propulsion system design recommendations for an advanced Orbit Transfer Vehicle

Science.gov (United States)

Redd, L.

1985-01-01

Various main propulsion system configurations of an advanced OTV are evaluated with respect to the probability of nonindependent failures, i.e., engine failures that disable the entire main propulsion system. Analysis of the life-cycle cost (LCC) indicates that LCC is sensitive to the main propulsion system reliability, vehicle dry weight, and propellant cost; it is relatively insensitive to the number of missions/overhaul, failures per mission, and EVA and IVA cost. In conclusion, two or three engines are recommended in view of their highest reliability, minimum life-cycle cost, and fail operational/fail safe capability.

MAINS: MULTI-AGENT INTELLIGENT SERVICE ARCHITECTURE FOR CLOUD COMPUTING

Directory of Open Access Journals (Sweden)

T. Joshva Devadas

2014-04-01

Full Text Available Computing has been transformed to a model having commoditized services. These services are modeled similar to the utility services water and electricity. The Internet has been stunningly successful over the course of past three decades in supporting multitude of distributed applications and a wide variety of network technologies. However, its popularity has become the biggest impediment to its further growth with the handheld devices mobile and laptops. Agents are intelligent software system that works on behalf of others. Agents are incorporated in many innovative applications in order to improve the performance of the system. Agent uses its possessed knowledge to react with the system and helps to improve the performance. Agents are introduced in the cloud computing is to minimize the response time when similar request is raised from an end user in the globe. In this paper, we have introduced a Multi Agent Intelligent system (MAINS prior to cloud service models and it was tested using sample dataset. Performance of the MAINS layer was analyzed in three aspects and the outcome of the analysis proves that MAINS Layer provides a flexible model to create cloud applications and deploying them in variety of applications.

Impact of Nonselective Laryngeal Reinnervation on Main Voice Characteristics

Directory of Open Access Journals (Sweden)

V.A. Palamarchuck

2014-02-01

Results. The anastomosis of the RLN was performed in 95 patients, who were in the main group (53 patients with anastomosis ansa cervicalis — RLN, 34 patients with anastomosis RLN — RLN and 8 with anastomosis RLN — nerve-donor — RLN.The postoperative average follow-up was 12.0 ± 1.8 months and the median time to the first indirect evidence of reinnervation —4.5 ± 2.9 months, which were observed in all patients of the main group: the emergence of vocal fold tone, reducing the size of the glottis during phonation (especially at the anastomosis ansa cervicalis — RLN from 2.25 ± 0.86 mm to 0.35 ± 0.17 mm. Acoustic analysis showed the most effective reinnervation by the anastomosis ansa cervicalis — RLN, with change of HNR from 12.0 ± 3.7 dB to 24.0 ± 2.4 dB, MPT — from 7.00 ± 1.22 s to 16.00 ± 3.52 s (p < 0.01. The analysis of subjective psychosocial self-assessment of phonation showed the improvement in all subgroups of the main group.

Leakage detection in underground gas mains with radioaktive argon

International Nuclear Information System (INIS)

Schmitz, J.

1975-01-01

In the field of gas supply, radionuclide techniques are suitable for the routine monitoring of transport mains by means of highly active tracer clouds and a measuring scraper as well as for exact leakage detection in local gas distribution systems. Very good results are obtained in the case of mains lying lower than 1.5 m if the length and alignment of the pipe section allow a towing probe to be pulled through. This was investigated systematically on a model stretch under practical conditions. The attempts to detect leakages were made with the aid of the radioactive isotope 41 Ar. Under conditions close to practice concerning pipe bedding, branching, pre-pressure, and leakage diameter, a leak with leakage rates as small as approx. 1 l/min could be measured with the aid of a towing probe with a precision of +-0.5 m. This accuracy is another advantage of this method. Branching and fittings with a big dead volume do not interfere with the evaluation. The investment for this method can be compared to other physical/technical investigations on mains, e.g. weld seam tests. (orig./LN) [de

Rates of the main thermonuclear reactions

International Nuclear Information System (INIS)

Abramovich, S.N.; Guzhovskii, B.Ya.; Dunaeva, S.A.; Fomushkin, E.F.

1992-01-01

The data on the cross sections of main thermonuclear reactions have been estimated with an account of the latest experimental results in a form of S-factor spline presentation. Based on this estimation, the reates of these reactions in 0.0001-1 MeV temperature range in the supposition of Maxwell distribution of relative velocities have been computed. The Maxwell-Boltzmann averaged -factors were calculated according to the table values of the reaction rates. Then the -factors were approximated with the 3 order spline-function. The necessity of the account of electron shielding and intramolecular movement at low temperatures is discussed (orig.)

The role of Main Institutions

DEFF Research Database (Denmark)

Persson, H Thomas R; Chabanet, Didier; Rakar, Fredrik

2017-01-01

), in many countries the need emerged to understand the best methods to promote their establishment and continued success. In order to understand these issues, to contribute to the academic debate on SEs and to give useful policy advice on a truly enabling ecosystem, in November 2013 a consortium of 11...... Entrepreneurship”; to identify the “New Generation” of Social Entrepreneurs; to build an “Evolutionary Theory of Social Entrepreneurship”; to provide effective policy advices to stakeholders. In order to pursue and achieve these research objectives, the consortium implemented a complex research design...... in the social economy; - In the fifth chapter the authors address the role of the main institutions in developing (or hindering) social enterprises; - In the sixth chapter, stakeholder network maps are used to identify four ‘ecosystem types’ across the 10 partner countries; - The seventh chapter gives...

Main Features in the Concept of Digital Bildung

DEFF Research Database (Denmark)

Tække, Jesper; Paulsen, Michael

The question of this paper is how we can understand the concept of Bildung in the time of digital media seen from a Klafkian perspective. It draws on Klafki (2014) by extrapolating what he suggest is the main features of Bildung, answering six questions: how can education 1. Foster persons who can......, bringing about different levels of what we from a Klafkian perspective call Digital Bildung. (2) We relate the Klafkian concept of Bildung to an action research experiment called Socio Media Education (SME). In this research project we have worked together with teachers in an upper secondary school...... features of Bildung are then discussed in regard to digital media. We do this by relating the Klafkian concept of Bildung to (1) a general theory about how schools seem to respond to the new digital challenges and possibilities. Our main point is that these responses can be divided into three waves...

PENDELEGASIAN TUGAS KEPADA TRAINEE DI MAIN KITCHEN GRAND ROYAL PANGHEGAR HOTEL BANDUNG

Directory of Open Access Journals (Sweden)

Asep Rijwan

2016-03-01

  Abstrak - Masalah yang di teliti adalah bagaimana pendelegasian tugas kepadatraineedi main kitchen, bagaimana standar operasional prosedur pendelegasian tugas kepada trainee di main kitchen, serta bagaimana kesempatan dan peluang dari pendelegasian tugas kepada trainee di main kitchen.  Dalam hal pengolahan data, penulis menggunakan analisis deskriptif, yaitu metode yang berusaha mengumpulkan data dan sesuai dengan keadaan yang sebenarnya, menyajikan serta menganalisanya sehigga dapat memberikan gambaran yang cukup jelas atas objek yang diteliti dan kemudian di ambil kesimpulannya. Berdasarkan hasil observasi ini dapat disimpulkan bahwa pendelegasian tugas kepada trainee di Main Kitchen Grand Royal Panghegar Hotel sudah dilaksanakan dengan sangat baik, hal ini dapat dilihat dengan di selesaikannya delegasi tugas dengan baik pula oleh trainee. Standar operasional prosedur pendelegasian kepada trainee di Main Kitchen Grand Royal Panghegar Hotel sudah baik, hal ini dapat dilihat bahwa trainee dapat melaksanakan kegiatan- kegiatan yang ada di main kitchen dengan baik pula. Peluang dari pendelegasian tugas kepada trainee di Main Kitchen Grand Royal Panghegar Hotel menjadikan trainee lebih percaya diri, memiliki pengalaman baru dalam mengolah makanan, lebih meningkatnya skill trainee, dan memiliki pengetahuan yang lebih dari sebelumnya, dan staff pun tidak akan mendapat terlalu banyak beban pekerjaan, karena sebagian dapat dikerjakan oleh trainee dengan baik. Berdasarkan dari hasil observasi dan pembahasan tersebut, penulis menyimpulkan bahwa apabila standar operasional prosedur pendelegasian kepada Trainee dijalankan dengan baik, maka selain berdampak baik kepada trainee akan berdampak baik pula kepada staff atau hotel itu sendiri.

13-colour photometry of pre-main sequence stars: preliminary report and results

Energy Technology Data Exchange (ETDEWEB)

Chavarria-K, C; de Lara, E [Universidad Nacional Autonoma de Mexico, Mexico City. Inst. de Astronomia

1981-01-01

Broad (UBVRI) and intermediate (13-colour) band photometry of 160 stars selected mainly from the Herbig Rao catalogue are being carried on currently, mainly to complement the published data of these stars in the optical window (for example shortward of the Balmer and longward of the Paschen discontinuities). The 13-colour photometric system and its applications to pre-main sequences stars are briefly discussed. First results are presented.

Main findings

International Nuclear Information System (INIS)

2014-01-01

Licensing regimes vary from country to country. When the license regime involves several regulators and several licenses, this may lead to complex situations. Identifying a leading organisation in charge of overall coordination including preparation of the licensing decision is a useful practice. Also, if a stepwise licensing process is implemented, it is important to fix in legislation decisions and/or time points and to identify the relevant actors. There is considerable experience in civil and mining engineering that can be applied when constructing a deep geological disposal facility. Specific challenges are, however, the minimization of disturbances to the host rock and the understanding of its long-term behavior. Construction activities may affect the geo-hydraulic and geochemical properties of the various system components which are important safety features of the repository system. Clearly defined technical specifications and an effective quality management plan are important in ensuring successful repository implementation which is consistent with safety requirements. Monitoring plan should also be defined in advance. The regulatory organization should prepare itself to the licensing review before construction by allocating sufficient resources. It should increase its competence, e.g., by interacting early with the implementer and through its own R and D. This will allow the regulator to define appropriate technical conditions associated to the construction license and to elaborate a relevant inspection plan of the construction work. After construction, obtaining the operational license is the most important and crucial step. Main challenges include (a) establishing sufficient confidence so that the methods for closing the individual disposal units comply with the safety objectives and (b) addressing the issue of ageing of materials during a 50-100 years operational period. This latter challenge is amplified when reversibility/retrievability is required

Natural gas in France: main results in 2008

International Nuclear Information System (INIS)

2008-01-01

This document briefly presents and comments the main data about natural gas in France: gas consumption, natural gas-based electricity production, refineries, energetic final consumption of natural gas, non-energetic final consumption of natural gas, gas imports and suppliers (countries), national production, and stocks

Analysis of the Main Indicators of the Bucharest Stock Exchange

OpenAIRE

Madalina Gabriela ANGHEL

2014-01-01

The goal of this article is to achieve an analysis of the evolution and significance of the main indicators of the Bucharest Stock Exchange (stock exchange capitalization, BET index, value of the concluded transactions) over the last fifteen years. One of the significant elements in analyzing the performances of the capital market consist of the stock exchange capitalization which an essential indicator for characterizing of this domain of activity, mainly if considering the fact that it is u...

The evolution of coronal activity in main sequence cool stars

International Nuclear Information System (INIS)

Stern, R.A.

1984-01-01

Stars spend most of their lifetime and show the least amount of nuclear evolution on the main sequence. However, the x-ray luminosities of cool star coronas change by orders of magnitude as a function of main sequence age. Such coronal evolution is discussed in relation to our knowledge of the solar corona, solar and stellar flares, stellar rotation and binarity. The relevance of X-ray observations to current speculations on stellar dynamos is also considered

THE INFLUENCE OF NUTRITION ON THE MAIN PRODUCTION OF BROCCOLI

Directory of Open Access Journals (Sweden)

Mădălina Doltu

2013-07-01

Full Text Available The research was realized in the unheated greenhouse of Horting Institute Bucharest, in 2012 year. It have aimed the influence of one phase of fertilization with ammonium nitrate (NH4NO3 on inflorescences of broccoli, at a hybrid F1 - Ironman. The fertilizer was used before the formation of main inflorescences, in different doses (100 kg/ha, 150 kg/ha, without fertilizer. Harvesting was done in 4 stages. A phase of fertilization with ammonium nitrate has influenced the main production of broccoli: the variant with fertilization 150 kg/ha has obtained the highest percentage of inflorescences formed, the average weight/inflorescence largest and superior production compared with other variants. Were obtained direct linear correlations between the doses of ammonium nitrate (NH4NO3 and the production aspects followed (percentage of main inflorescences harvested, average weight/inflorescence, total production, significances of the correlations very high.

Causal Analysis of The Uncontrolled Moderator In The HFEF Main Cell

Energy Technology Data Exchange (ETDEWEB)

Posegate, Charles R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Crofts, Bryan P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2012-12-01

On 11/07/2012 while investigating the cause of defects in neutron radiography film at HFEF, oil was discovered near the elevator shaft located at the 4M location within the Main Cell. Subsequent investigation identified oil (untracked moderator) in several locations ofthe HFEF Main Cell. Initial analysis determined that oil leaking from a 1M shielding window had leaked past a compensatory containment system resulting in a thin layer of oil found in several locations on the main cell floor. The result of this condition is uncontrolled moderator in moderator controlled zones, which is a violation of Criticality Hazard Control Statements (CHCS) for HFEF.

Fluxes of radionuclides in agricultural environments: main results and still unsolved problems

International Nuclear Information System (INIS)

Alexakhin, R.; Firsakova, S.; Rauret, G.; Arkhipov, N.; Vandecasteele, C.M.; Ivanov, Y.; Fesenkow, S.; Sanzharova, N.

1996-01-01

Agricultural products originating from the areas subjected to high radioactive deposit after the Chernobyl accident are a main contributor to the radiological dose to local populations. The transfer fluxes of radionuclides through agricultural food chains, to food products consumed by humans, depend on the characteristics of t = = = = = = 37 Cs fluxes in the main agricultural ecosystems of the Chernobyl accident zone are quantitatively determined and the main topics, where further investigation is needed, are identified

30 CFR 75.313 - Main mine fan stoppage with persons underground.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fan stoppage with persons underground... mine fan stoppage with persons underground. (a) If a main mine fan stops while anyone is underground and the ventilating quantity provided by the fan is not maintained by a back-up fan system— (1...

Apology Strategies Performed By Main Characters In Perahu Kertas Novel

OpenAIRE

KUSUMA, DEVILIA INDAH

2014-01-01

Keywords: speech act, apology strategies, Perahu Kertas novel Apology is a part of human communication to maintain good relations between people or to restore harmony. The writer conducted a research on apology strategies in Bahasa Indonesia, by analyzing a novel entitled Perahu Kertas. In this study, there are two problems to be solved: (1) What apology strategies are performed by main characters in Perahu Kertas novel, and (2) How is the act of apologizing upgraded by main characters in Per...

Aboveground roofed design for the disposal of low-level radioactive waste in Maine

Energy Technology Data Exchange (ETDEWEB)

Alexander, J.A. [Univ. of Maine, Orono, ME (United States)

1993-03-01

The conceptual designs proposed in this report resulted from a study for the Maine Low-level Radioactive Waste Authority to develop conceptual designs for a safe and reliable disposal facility for Maine`s low-level radioactive waste (LLW). Freezing temperatures, heavy rainfall, high groundwater tables, and very complex and shallow glaciated soils found in Maine place severe constraints on the design. The fundamental idea behind the study was to consider Maine`s climatic and geological conditions at the beginning of conceptual design rather than starting with a design for another location and adapting it for Maine`s conditions. The conceptual designs recommended are entirely above ground and consist of an inner vault designed to provide shielding and protection against inadvertent intrusion and an outer building to protect the inner vault from water. The air dry conditions within the outer building should lead to almost indefinite service life for the concrete inner vault and the waste containers. This concept differs sharply from the usual aboveground vault in its reliance on at least two independent, but more or less conventional, roofing systems for primary and secondary protection against leakage of radioisotopes from the facility. Features include disposal of waste in air dry environment, waste loading and visual inspection by remote-controlled overhead cranes, and reliance on engineered soils for tertiary protection against release of radioactive materials.

Three aspects of stellar evolution near the main sequence

International Nuclear Information System (INIS)

Morgan, J.C.

1979-05-01

Three problems of stellar evolution are considered: the gap in the HR diagram of M67, the evolutionary status of RS CVn binaries and the solar neutrino problem. The physical basis of the Eggleton stellar evolution computer program is described. The program was used to calculate a grid of evolutionary tracks for models with masses between 0.7 and 1.29 solar masses. The more massive stars considered here have expanding convective cores during their main sequence evolution. The isochrone of the old galactic cluster M67 has a gap at the top of its main sequence because of the rapid evolution of stars at hydrogen exhaustion. RS CVn binaries present a complex collection of observational phenomena although they appear to be detached binaries. Their evolutionary status has remained controversial because of their high space density. Here it is shown that a post main sequence interpretation is satisfactory. Models of the Sun with metal poor interiors have been proposed in an attempt to resolve the solar neutrino problem. Here the evolution of two such models is calculated in detail, including a gradual contamination of the surface convection zone to produce the observed metal abundance, giving fully consistent models of the Sun as it is observed. (author)

Indoor Air Quality In Maine Schools: Report of the Task Force To Examine the Establishment and Implementation of State Standards for Indoor Air Quality in Maine Schools.

Science.gov (United States)

Malcolm, Judith

Asserting that in Maine and across the nation, school buildings are becoming increasingly plagued with indoor air quality (IAQ) problems which contribute to a variety of illnesses in children and adults, this report from a Maine state legislative task force identifies appropriate policies and identifies actions necessary for the prevention and…

Main problems of modern radiation hygiene

International Nuclear Information System (INIS)

Il'in, L.A.; Buldakov, L.A.; Knizhnikov, V.A.

1982-01-01

The results of investigations carried out in 1980-81 in the field of radiation hygiene as well as plans for 1981-85 are considered. Three main groups of problems which the radiation hygiene is facing at the present time are discussed. The determination of levels and study of regularities of ionizing radiation dose formation in the population and personnel working with ionizing radiation sources in one of the promissing directions of the investigations. Delayed irradiation aftereffects andcontaminant action ofirradiation and chemical substances are no less important. The third important problem lies in the development of protective measures and arrangements on improving state sanitary inspection in the field of radiation hygiene

Condom use with "casual" and "main" partners: what's in a name?

Science.gov (United States)

Lescano, Celia M; Vazquez, Elizabeth A; Brown, Larry K; Litvin, Erika B; Pugatch, David

2006-09-01

This study examined adolescents' attitudes about and behaviors toward condom use with "casual" vs. "main" sexual partners. Participants were sexually active adolescents aged 15-21 years (n = 1316) recruited from primary care clinics and through outreach activities in three major cities in the United States. Assessment of condom use within the past 90 days, relevant attitudes, substance use, and demographic data were obtained via audio computer-assisted self-interview (ACASI). Participants were divided into two groups: the 65% who reported main partners only (MP group) and the 35% who had at least one casual partner (CP group). Adolescents in the MP group were more likely to be female, whereas males were significantly more likely to report casual partners. Race/ethnicity, age, education level, household income, and sexually transmitted infection (STI) history were unrelated to group status (i.e., sexual partner type). Greater substance use and riskier attitudes were reported by teens in the CP group. The number of unprotected sex acts in the past 90 days was substantial and equivalent between the main and casual partner groups (19.2 vs. 21.5, respectively). Regression analyses revealed that perceptions of main partner attitudes toward condom use and condom use expectations were significantly related to condom use with MPs, but that attitudes were not related to condom use with CPs. Adolescents with either casual or main partners may be at continued risk for contracting human immunodeficiency virus (HIV) and STIs, given high rates of unprotected sex. Interventions that do not target attitudes and practices related to casual partners as compared with main partners may miss an opportunity to change risk behaviors. This study demonstrates the importance of understanding an adolescent's perception of partner types in order to design effective interventions.

Impedance budget and beam stability analysis of the Fermilab Main Injector

International Nuclear Information System (INIS)

Martens, M.A.; Ng, K.Y.

1993-05-01

The impedance budget of the Fermilab Main Injector (MI) is estimated, which includes the contributions from the resistive walls, bellows, rf cavities, steps, Lambertsons, etc. Beam stability during ramping and bunch coalescence is analyzed. The transverse resistive-wall coupled bunch growth is found to be somewhat worse than the situation in the Main Ring (MR)

Fast Beam-ion Instabilities in CLIC Main Linac Vacuum Specifications

CERN Document Server

Oeftiger, Adrian

2011-01-01

Specifications for the vacuum pressure in the CLIC electron Main Linac are determined by the onset of the fast beam-ion instability (FBII). When the electron beam is accelerated in the Main Linac, it ionizes the residual gas in the chamber through scattering ionization. If the density of ions around the beam exceeds a certain threshold, a resonant motion between the electron beam and the ions can be excited. A two-stream instability appears and as a result the beam acquires a coherent motion, which can quickly lead to beam quality degradation or even complete loss. Thus, the vacuum pressure must be kept below this threshold to prevent the excitation of FBII. The CLIC Main Linac poses an additional challenge with respect to previous FBII situations, because the gas ionization does not solely occur via scattering. The submicrometric beam sizes lead to extremely high electric fields around the beam and therefore result in field ionization beyond a certain threshold. The residual gas in the corresponding volume a...

The 8-GeV transfer line injection into main ring

International Nuclear Information System (INIS)

Yang, M.J.

1995-06-01

Included in this report are a brief review of the design lattice of the 8-GeV beam transfer line and the Main Ring, the recent measurements on the 8-GeV line lattice function as well as that of the Main Ring at 8-GeV. The injection matching is a very important part of the MR operation. Mismatches such as energy, timing, or position are easily corrected because they cause oscillations which are visible on the Turn-By-Turn (TBT) TV monitor display. Mis-matches due to beta and dispersion functions are detected only by using the Flying Wire or by doing measurements during beam study. A new method which makes use of the available data from TBT hardware was used to obtain the beam phase space ellipse. Data taken from Main Ring at injection gives the beta function needed for transfer matching from 8-GeV line. The result of this measurement is also presented here

Discovery of three x-ray luminous pre-main-sequence stars

International Nuclear Information System (INIS)

Feigelson, E.D.; Kriss, G.A.

1981-01-01

Three X-ray sources found serendipitously in Einstein images of the Taurus-Auriga cloud complex were observed at the McGraw-Hill Observatory and are found to be associated with approx.12 mag stars with weak Hα emission. The stars lie on the edges of dark clouds and are spectroscopically similar to the least active emission-line pre-main-sequence stars. Although they lie well above the ZAMS in the H-R diagram, they do not exhibit ultraviolet excess, strong optical variability, or evidence for mass outflow/inflow characteristics of the more active T Tauri stars. Their only unusual property is high X-ray luminosity (approx.10 30 ergs s1). It is suggested that the X-ray emission from pre-main-sequence stars is not closely linked to the conditions giving rise to their unusual spectroscopic properties. The emission may instead represent an enhanced form of the coronal activity producing X-rays observed in late-type main-sequence stars

PRISMA database machine: A distributed, main-memory approach

NARCIS (Netherlands)

Schmidt, J.W.; Apers, Peter M.G.; Ceri, S.; Kersten, Martin L.; Oerlemans, Hans C.M.; Missikoff, M.

1988-01-01

The PRISMA project is a large-scale research effort in the design and implementation of a highly parallel machine for data and knowledge processing. The PRISMA database machine is a distributed, main-memory database management system implemented in an object-oriented language that runs on top of a

Optimization of the main control room habitability system in nuclear power plant

International Nuclear Information System (INIS)

Zheng Guanghui; Zhao Xinyan

2013-01-01

This article describes the optimization of main control room habitability system in nuclear power plant. It also describes the design shortage in terms of habitability in the main control room. Through modification and optimization, habitable conditions are met for personnel staying in the emergency area of the main control room for a period of time, with an aim to take accident intervention measures smoothly and reduce the accident loss and radioactive contamination as low as possible. (authors)

The main challenges for manufacturing companies in implementing and utilizing configurators

DEFF Research Database (Denmark)

Kristjansdottir, Katrin; Shafiee, Sara; Hvam, Lars

2018-01-01

Companies providing customized products increasingly apply configurators in supporting sales and design activities, thus improving lead-times, quality, cost, benefits perceived by customers, and customer satisfaction. While configurator advantages have been substantially investigated....... Finally, it is investigated whether the importance of the main categories of challenges varies according to a number of potential context variables. The results of the survey, which studies manufacturing companies that use configurators in providing customized products, offer new insights......, the challenges of implementing and utilizing configurators have less often been considered. By reviewing relevant literature, the present study first categorizes the main challenges faced by manufacturing companies when implementing and utilizing configurators. Six main categories of challenges are identified...

Development and application of intelligent CAE system for cyclotron main magnet

International Nuclear Information System (INIS)

Zhang Tianjue; Chen Yong; Fan Mingwu

1993-01-01

The main magnet that represents the feature of the cyclotron is the most important part in a cyclotron construction. Though there are many codes devoted to solve magnetic field computation problems, the results from them are depended on user's skill and experience very much. To help cyclotron magnet designer get acceptable result an intelligent CAE system for cyclotron main magnet design and machining has been developed. A reasonable good results in design could be get even the designer is a beginner with the help from an expert knowledge library installed in the program. The codes include following functions: 1. Intelligent CAD; 2. 2D and 3D magnetic field computation; 3. Beam dynamics analysis; 4. CAM for main magnet

An improved imaginary transition γt lattice for the Main Injector

International Nuclear Information System (INIS)

Ng, K.Y.; Trbojevic, D.

1992-08-01

An improved imaginary-γ t lattice for the 150 GeV Fermilab Main Injector is presented. It has the properties of small dispersion function, good tunability, small tune dependences on momentum with the presence of chromaticity sextupoles, and a large dynamical aperture. In addition, many of the quadrupoles can be recycled from the present Main Ring

MAIN AREAS OF RESEARCH STAFF AS PROPERTY MARKETING

Directory of Open Access Journals (Sweden)

Svetlana Yu. Kazantsevа

2015-01-01

Full Text Available The article explains the concept of theobject of marketing, marketing personnel, as a form of marketing. The types of elasticity, the main factors affecting the elasticity of the staff also identifi ed key issues for the analysis of staff loyalty as one of the objects of marketing.

Main Quality Attributes of Monoclonal Antibodies and Effect of Cell Culture Components

Science.gov (United States)

Torkashvand, Fatemeh; Vaziri, Behrouz

2017-05-01

The culture media optimization is an inevitable part of upstream process development in therapeutic monoclonal antibodies (mAbs) production. The quality by design (QbD) approach defines the assured quality of the final product through the development stage. An important step in QbD is determination of the main quality attributes. During the media optimization, some of the main quality attributes such as glycosylation pattern, charge variants, aggregates, and low-molecular-weight species, could be significantly altered. Here, we provide an overview of how cell culture medium components affects the main quality attributes of the mAbs. Knowing the relationship between the culture media components and the main quality attributes could be successfully utilized for a rational optimization of mammalian cell culture media for industrial mAbs production.

Integrated geophysical investigations of Main Barton Springs, Austin, Texas, USA

Science.gov (United States)

Saribudak, By Mustafa; Hauwert, Nico M.

2017-03-01

Barton Springs is a major discharge site for the Barton Springs Segment of the Edwards Aquifer and is located in Zilker Park, Austin, Texas. Barton Springs actually consists of at least four springs. The Main Barton Springs discharges into the Barton Springs pool from the Barton Springs fault and several outlets along a fault, from a cave, several fissures, and gravel-filled solution cavities on the floor of the pool west of the fault. Surface geophysical surveys [resistivity imaging, induced polarization (IP), self-potential (SP), seismic refraction, and ground penetrating radar (GPR)] were performed across the Barton Springs fault and at the vicinity of the Main Barton Springs in south Zilker Park. The purpose of the surveys was two-fold: 1) locate the precise location of submerged conduits (caves, voids) carrying flow to Main Barton Springs; and 2) characterize the geophysical signatures of the fault crossing Barton Springs pool. Geophysical results indicate significant anomalies to the south of the Barton Springs pool. A majority of these anomalies indicate a fault-like pattern, in front of the south entrance to the swimming pool. In addition, resistivity and SP results, in particular, suggest the presence of a large conduit in the southern part of Barton Springs pool. The groundwater flow-path to the Main Barton Springs could follow the locations of those resistivity and SP anomalies along the newly discovered fault, instead of along the Barton Springs fault, as previously thought.

Main technical topics in 1999

International Nuclear Information System (INIS)

2000-01-01

This Safety Authority annual report strives to present current organizational provisions and future trends in nuclear safety supervision in France and to describe the most outstanding occurrences during the past year. A first part presents nine documents concerning the main topics of 1999: aging of nuclear installations, the Offsite Emergency Plans (PPI), the impact of nuclear activities on man and the environment, the criticality hazards, EDF in 1999, the EPR project, the Andra in 1999, the transport incidents, the nuclear safety in eastern Europe. The second part presents the missions and actions of the Nuclear Installations Safety in the domains of the liabilities, the organization of the nuclear safety control, the regulations of the INB, the public information, the international relations, the crisis management, the radioactive materials transportation, the radioactive wastes. The equipment, the radiation protection and the exploitation of the pressurized water reactors are also treated just as the experimental reactors, the fuel cycle installations and the the nuclear installations dismantling. (A.L.B.)

Can Maine metropolitan planning organizations (MPOs) finance transportation projects through bond financing?

Science.gov (United States)

2008-12-01

In January 2008 the Maine metropolitan planning organizations (MPOs) requested the Transportation : Research Division of the Maine Department of Transportation to conduct research to determine if it is : possible for MPOs to finance projects through ...

Imitative modeling automatic system Control of steam pressure in the main steam collector with the influence on the main Servomotor steam turbine

Science.gov (United States)

Andriushin, A. V.; Zverkov, V. P.; Kuzishchin, V. F.; Ryzhkov, O. S.; Sabanin, V. R.

2017-11-01

The research and setting results of steam pressure in the main steam collector “Do itself” automatic control system (ACS) with high-speed feedback on steam pressure in the turbine regulating stage are presented. The ACS setup is performed on the simulation model of the controlled object developed for this purpose with load-dependent static and dynamic characteristics and a non-linear control algorithm with pulse control of the turbine main servomotor. A method for tuning nonlinear ACS with a numerical algorithm for multiparametric optimization and a procedure for separate dynamic adjustment of control devices in a two-loop ACS are proposed and implemented. It is shown that the nonlinear ACS adjusted with the proposed method with the regulators constant parameters ensures reliable and high-quality operation without the occurrence of oscillations in the transient processes the operating range of the turbine loads.

Main results of BN-600 reactor stress-strain state investigations

International Nuclear Information System (INIS)

Panov, V.A.

1983-01-01

The development of BN-600 fast reactor plant needed the solution of a series of complex engineering problems including ones for confirming integrity of the most vital structural components. The particular attention was given to the main vessel since reactor availability end safe operation of the plant as a whole depend on vessel strength end integrity. The present report deals with the main results of theoretical and experimental investigations of the stress-strain state of BN-600 reactor vessel carried out during design, start-up and initial bringing the reactor to power

Determining the Main Idea: Instructional Strategies That Work

Science.gov (United States)

Lord, Kathleen M.

2015-01-01

The ability to identify the main idea through close reading of informational text is a higher-level skill students develop in elementary grades as a foundation for the acquisition of other critical skills in later grades. This article provides instructional strategies for this important skill as well as for improving reading comprehension.

Main results of the third international PIV Challenge

NARCIS (Netherlands)

Stanislas, M.; Okamoto, K.; Kähler, C.J.; Westerweel, J.; Scarano, F.

2008-01-01

This paper presents the main results of the third international PIV Challenge which took place in Pasadena (USA) on the 19th and 20th of September 2005. This workshop was linked to the PIV05 International Symposium held at the same place the same week. The present contribution states the objectives

Forensic entomology and main challenges in Brazil.

Science.gov (United States)

Gomes, Leonardo; Von Zuben, Cláudio J

2006-01-01

Apart from an early case report from China (13th century), the first observations on insects and other arthropods as forensic indicators were documented in Germany and France during mass exhumations in the 1880s by Reinhard, who is considered a co-founder of the discipline. After the French publication of Mégnin's popular book on the applied aspects of forensic entomology, the concept quickly spread to Canada and United States. At that time, researchers recognized that the lack of systematic observations of insects of forensic importance jeopardized their use as indicators of postmortem interval. General advances in insect taxonomy and ecology helped to fill this gap over the following decades. After World Wars, few forensic entomology cases were reported in the scientific literature. From 1960s to the 1980s, Leclercq and Nuorteva were primarily responsible for maintaining the method in Central Europe, reporting isolated cases. Since then, basic research in the USA, Russia and Canada opened the way to the routine use of Entomology in forensic investigations. Identifications of insects associated with human cadavers are relatively few in the literature of the Neotropical region and have received little attention in Brazil. This article brings an overview of historic developments in this field, the recent studies and the main problems and challenges in South America and mainly in Brazil.

Coastal Maine Submerged Aquatic Vegetation Data 1993-1997 Geodatabase

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Maine's eelgrass (SAV) meadows form an important aquatic habitat for the state. These meadows provide shelter for juvenile fish, and invertebrates. In certain...

Mortise terrorism on the main pipelines

Science.gov (United States)

Komarov, V. A.; Nigrey, N. N.; Bronnikov, D. A.; Nigrey, A. A.

2018-01-01

The research aim of the work is to analyze the effectiveness of the methods of physical protection of main pipelines proposed in the article from the "mortise terrorism" A mathematical model has been developed that made it possible to predict the dynamics of "mortise terrorism" in the short term. An analysis of the effectiveness of physical protection methods proposed in the article to prevent unauthorized impacts on the objects under investigation is given. A variant of a video analytics system has been developed that allows detecting violators with recognition of the types of work they perform at a distance of 150 meters in conditions of complex natural backgrounds and precipitation. Probability of detection is 0.959.

The Star-forming Main Sequence of Dwarf Low Surface Brightness Galaxies

Science.gov (United States)

McGaugh, Stacy S.; Schombert, James M.; Lelli, Federico

2017-12-01

We explore the star-forming properties of late-type, low surface brightness (LSB) galaxies. The star-forming main sequence ({SFR}-{M}* ) of LSB dwarfs has a steep slope, indistinguishable from unity (1.04 ± 0.06). They form a distinct sequence from more massive spirals, which exhibit a shallower slope. The break occurs around {M}* ≈ {10}10 {M}⊙ , and can also be seen in the gas mass—stellar mass plane. The global Kennicutt-Schmidt law ({SFR}-{M}g) has a slope of 1.47 ± 0.11 without the break seen in the main sequence. There is an ample supply of gas in LSB galaxies, which have gas depletion times well in excess of a Hubble time, and often tens of Hubble times. Only ˜ 3 % of this cold gas needs be in the form of molecular gas to sustain the observed star formation. In analogy with the faint, long-lived stars of the lower stellar main sequence, it may be appropriate to consider the main sequence of star-forming galaxies to be defined by thriving dwarfs (with {M}* {10}10 {M}⊙ ) are weary giants that constitute more of a turn-off population.

The Influence of Heating Mains on Yeast Communities in Urban Soils

Science.gov (United States)

Tepeeva, A. N.; Glushakova, A. M.; Kachalkin, A. V.

2018-04-01

The number and species diversity of yeasts in urban soils (urbanozems) affected by heating mains and in epiphytic yeast complexes of grasses growing above them were studied. The number of yeasts in the soil reached 103-104 CFU/g; on the plants, 107 CFU/g. Significant (by an order of magnitude) increase in the total number of soil yeasts in the zone of heating mains in comparison with the surrounding soil was found in winter period. Overall, 25 species of yeasts were isolated in our study. Yeast community of studied urbanozems was dominated by the Candida sake, an eurybiont of the temperate zone and other natural ecotopes with relatively low temperatures, but its share was minimal in the zone of heating mains. In general, the structure of soil and epiphytic yeast complexes in the zones of heating mains differed from that in the surrounding area by higher species diversity and a lower share of pigmented species among the epiphytic yeasts. The study demonstrated that the number and species structure of soil yeast communities in urban soils change significantly under the influence of the temperature factor and acquire a mosaic distribution pattern.

Lit and unlit side temperatures of the Main Rings of Saturn.

Science.gov (United States)

Flandes, A.; Garcia, A.; Deau, E.; Spilker, L. J.

2017-12-01

The differences in the temperatures of both the lit and unlit sides of the main rings of Saturn can reveal important information about their structure. In general, the temperature of the main rings strongly depends upon the distribution and the general structure of the ensembles of particles that compose them, mainly due to shadowing effects that modulate how much energy reaches the individual particles -granted that the direct solar energy is the main driver of the rings' temperature-. In order to reproduce the temperatures of both sides of the rings, we use a semi-analytical energy balance model (considering solar direct and Saturn reflected energy, Saturn thermal energy and particles' thermal energies), where the shadowed fractional areas of the rings are removed through a shadowing function. We obtain this function (dependent on the solar elevation angle) for 13 different regions (for the A, CD, B and C rings) along the radial direction that are simulated using arrays of lambertian spherical particles based on the average properties of the structure of these regions derived from the Cassini UVIS observations. The obtained synthetic temperatures are compared to the Cassini CIRS measured temperatures (from -22º to equinox) with good agreement.

A red tide of Alexandrium fundyense in the Gulf of Maine

Science.gov (United States)

McGillicuddy, D. J.; Brosnahan, M. L.; Couture, D. A.; He, R.; Keafer, B. A.; Manning, J. P.; Martin, J. L.; Pilskaln, C. H.; Townsend, D. W.; Anderson, D. M.

2014-05-01

In early July 2009, an unusually high concentration of the toxic dinoflagellate Alexandrium fundyense occurred in the western Gulf of Maine, causing surface waters to appear reddish brown to the human eye. The discolored water appeared to be the southern terminus of a large-scale event that caused shellfish toxicity along the entire coast of Maine to the Canadian border. Rapid-response shipboard sampling efforts together with satellite data suggest the water discoloration in the western Gulf of Maine was a highly ephemeral feature of less than two weeks in duration. Flow cytometric analysis of surface samples from the red water indicated the population was undergoing sexual reproduction. Cyst fluxes downstream of the discolored water were the highest ever measured in the Gulf of Maine, and a large deposit of new cysts was observed that fall. Although the mechanisms causing this event remain unknown, its timing coincided with an anomalous period of downwelling-favorable winds that could have played a role in aggregating upward-swimming cells. Regardless of the underlying causes, this event highlights the importance of short-term episodic phenomena on regional population dynamics of A. fundyense.

Main Developments and Perspectives of the European Union

Directory of Open Access Journals (Sweden)

Prof. Constantin ANGHELACHE PhD

2017-06-01

Full Text Available In this paper, the authors have analyzed the main economic-financial evolutions of the European Union member countries. First, we have performed the study regarding the evolution of the Gross Domestic Product growth in the European Union, by total and by comparison with other countries that play an important role in the global evolution of the economy. There are emphasized comparative data regarding the economic growth of China, which is the highest in the world. The growth rate of China is net superior to the rates recorded by USA, Japan and European Union (28 members. There can be observed a significant decrease of economic growth during the period 2008-2010, with a negative peak in 2009 (-2%-6% in the case of the United States, EU-28 and Japan. Even if China itself has felt the effects of the economic-financial crisis, the growth rate has reduced from 14% in 2007 to 9% in 2008, the decrease continued in the subsequent period, reaching some 8.5% in 2014. Then, we have analyzed the financial evolution, the exchange rate of the main currencies, the evolution of the inflation and the balance of foreign payments and international commercial exchanges. Particular attention was granted to direct foreign investments in and out the EU member states. The study is focused on the comparison of the foreign investments’ evolution during 2009-2014 for the main 10 partners of the European Union. Through this study, the results achieved by the EU during the specified periods were outlined, at each specific item within the internal, but also external relationships with other states in Europe or on wider global plan. The authors have put additional emphasis on the analysis of the period after 2007, since Romania has become member of the European Union.

Design technology development of the main coolant pump for an integral reactor

International Nuclear Information System (INIS)

Park, J. S.; Lee, J. S.; Kim, M. H.; Kim, D. W.; Kim, J. I.

2004-01-01

All of the reactor coolant pump currently used in commercial nuclear power plant were imported from foreign country. Now, the developing program of design technology for the reactor coolant pump will be started in a few future by domestic researchers. At this stage, the design technology of the main coolant pump for an integral reactor is developed based on the regulation of domestic nuclear power plant facilities. The main coolant pump is a canned motor axial pump, which accommodates all constraints required from the integral reactor system. The main coolant pump does not have mechanical seal device because the rotor of motor and the shaft of impeller are the same one. There is no flywheel on the rotating shaft of main coolant pump so that the coastdown duration time is short when the electricity supply is cut off

Main components and content of sports volunteer activities

Directory of Open Access Journals (Sweden)

Iryna Petrenkо

2017-12-01

Full Text Available Purpose: identification of the main structural components and content of sports volunteer activities. Material & Methods: used analysis of literature and documents, organizational analysis. Result: basic structural components of sports volunteer activity are defined. The content of sports volunteer activity is disclosed. Conclusion: sports volunteer activity includes the following structural components: subject, object, purpose, motivation, means, actions; subject is a sports volunteer, the object is a sports competition, the goal is to provide gratuitous assistance for a quality competition, the means are the special knowledge, skills, communication abilities of sports volunteers, actions should be understood as types of volunteer activities and functions that volunteers perform during the preparation and conduct of competitions. Main types of sports volunteer activity are: 1 organizational; 2 judiciary; 3 coaching; 4 legal; 5 medical. Functions that volunteers perform in the competition system are general and special. Content of the functions of sports volunteering depends on the specifics of the sports, the rank of the competition, the specifics of the competition for people with special needs.

Geotechnical characterization for the Main Drift of the Exploratory Studies Facility

International Nuclear Information System (INIS)

Kicker, D.C.; Martin, E.R.; Brechtel, C.E.; Stone, C.A.; Kessel, D.S.

1997-07-01

Geotechnical characterization of the Main Drift of the Exploratory Studies Facility was based on borehole data collected in site characterization drilling and on scanline rock mass quality data collected during the excavation of the North Ramp. The Main Drift is the planned 3,131-m near-horizontal tunnel to be excavated at the potential repository horizon for the Yucca Mountain Site Characterization Project. Main Drift borehole data consisted of three holes--USW SD-7, SD-9, and SD-12--drilled along the tunnel alignment. In addition, boreholes USW UZ-14, NRG-6, and NRG-7/7A were used to supplement the database on subsurface rock conditions. Specific data summarized and presented included lithologic and rock structure core logs, rock mechanics laboratory testing, and rock mass quality indices. Cross sections with stratigraphic and thermal-mechanical units were also presented. Topics discussed in the report include geologic setting, geologic features of engineering and construction significance, anticipated ground conditions, and the range of required ground support. Rock structural and rock mass quality data have been developed for each 3-m interval of core in the middle nonlithophysal stratigraphic zone of the Topopah Spring Tuff Formation. The distribution of the rock mass quality data in all boreholes used to characterize the Main Drift was assumed to be representative of the variability of the rock mass conditions to be encountered in the Main Drift. Observations in the North Ramp tunnel have been used to project conditions in the lower lithophysal zone and in fault zones

Water Stratification Raster Images for the Gulf of Maine

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This geodatabase contains seasonal water stratification raster images for the Gulf of Maine. They were created by interpolating water density (sigma t) values at 0...

Fish-eye view from 6th floor of Main Building towards Jura

CERN Multimedia

1977-01-01

Main Auditorium, Bld 2, Main Mechanical Workshop. Behind, one sees the buildings for the 2-m Bubble Chamber with the safety sphere, and the experimental East Hall at the PS. At the horizon is the water tower closed to ISR.

Main trends of the international market of educational services

Directory of Open Access Journals (Sweden)

T. I. Chinaeva

2017-01-01

Full Text Available The world education system everything will more be transformed to the multi-billion industry, one of the profitable directions of which is training of foreign students. Creation and development of successfully functioning system of the international education, attraction of a significant amount of foreign students are not only to increase the budget of higher education institution and to lift its prestige, but also and a method of promotion of policy, culture, economy, a conduct of life of the host country home. With respect there to research and practical interest has studying and the analysis of the main directions of development of the international market of educational services. This article in which changes of the main indicators reflecting the main vectors of export of education in the leading countries - exporters and in our country are considered is also devoted to these questions.The purpose of work is the analysis of development of the international market of educational services in recent years. The analysis of analytical and statistical information on the processes happening in this area, both at the international level, and in Russia is the basis.In the course of the research the methods of the analytical and logical analysis on the basis of statistical data promoting more detailed studying of dynamic and structural changes of the social and economic phenomena and processes were used.In general for the last 30 years the extent of the international student’s mobility increased more than by 6 times. The international educational market constantly develops, increasing the turnover. However flows of the international students periodically change the orientation, both on countries of source, and over the countries of training. At the same time it is possible to note that changes in structure of the largest countries recipients happen more slowly, than as a part of the countries delivering foreign students. The largest world sources of

Ostial left main coronary stenosis in a frequent flyer.

LENUS (Irish Health Repository)

O'Sullivan, John F

2009-05-15

A 52 year old gentleman presented with chest pain, after a long distance flight from India; he had made long haul flights every 2 weeks over the last 5 years as part of his job. His ECG revealed T wave inversion in leads V1-3. Cardiac biomarkers including troponin were negative; we proceeded to exercise stress testing (EST). This revealed 2 mm ST depression at 2 min of the standard Bruce protocol, associated with chest pain. He was taken immediately to the coronary catheterization laboratory; engagement of the left main caused pressure damping with 6 French, then 5 French diagnostic Judkins left 4 catheters. An ostial left main stenosis was seen; the right and left coronary trees otherwise had no significant stenoses. He had normal LV function. He underwent inpatient CABG 7 days later.

Design and main characteristics of HTGR fuel elements

International Nuclear Information System (INIS)

Chernikov, A.S.; Kolesov, V.S.; Permyakov, L.N.; Koshelev, Yu.V.; Mikhajlichenko, L.I.

1983-01-01

Two types of spherical fuel elements and coated particles were investigated under the operating conditions of the high temperature reactors in the Soviet Union (VGR-50 and VG-400). This paper gives the main characteristics of spherical fuel elements (thermal conductivity, static and dynamic strength, wear resistance, release of gaseous fission products, etc.) as determined in test facilities. (author)

The main signs of ageing in people with intellectual disability.

Science.gov (United States)

Wark, Stuart; Hussain, Rafat; Edwards, Helen

2016-12-01

Investigations around ageing with an intellectual disability have increased substantially in the past three decades. A research gap continued to exist regarding the detection of ageing issues in this cohort of people, particularly in rural areas where access to specialist support continued to be limited. The purpose of this study was to identify the main signs of ageing in rural people with intellectual disabilities. A multi-round Delphi design was used to examine what signs of ageing were observed by disability support staff, who assisted people with intellectual disability. The project was conducted across nine of the ten rural regions (as defined by the government funding body) in New South Wales (NSW). There were 31 participants representing 14 non-government organisations. The group was composed of 26 women and 5 men, with a mean age of 47 years, who averaged 10-year experience with people with intellectual disabilities. The objective was to gain the direct input of rurally based disability workers to identify the main signs of ageing in people with intellectual disabilities. Thirty-two specific signs of ageing, including emerging mental health issues, grief, loss of identity and aggression, were identified. A thematic analysis indicated two main categories: mental/emotional functioning and physical functioning. When carers have the information and skills needed to identify the main signs of ageing, they can more accurately recognise and address potential problems in a timely manner. Such understandings have the potential to reduce premature admissions to residential aged-care. © 2016 National Rural Health Alliance Inc.

Marine sources influence fog bioaerosol composition in Namibia and Maine

Science.gov (United States)

Evans, S. E.; Dueker, E.; Logan, J. R. V.; Weathers, K. C.

2017-12-01

Organic aerosol particles act as condensation nuclei for fogs and clouds (CCN) and are main determinants of fog evolution, chemical processing, and overall aerosol-fog-cloud interactions. Recent work has confirmed the presence of marine bioaerosols, but little is known about their sources, transport, taxonomic diversity or viability. The few studies that have characterized bioaerosols in fog have been limited to culture-based approaches that capture only a fraction of microbial diversity. We characterized fungal and bacterial communities in the fog in two iconic fog systems, the Coast of Maine (USA) and the Namib Desert (Namibia). The biology of fog in both systems was diverse and distinct, by geography, from dry aerosols, and from local sources. The local environment had a dominant influence on fog in both the Namib and Maine; in particular, the biology of fog in Maine, which was collected near the coast, was more similar to microbial communities from the ocean surface. In both systems, differences between pre- and post-fog aerosol communities suggest that fog events can significantly alter microbial aerosol diversity and composition. This insight into the microbial composition of fog indicates that its origin and frequency has the potential to influence the number and diversity of microorganisms that settle in a given environment, and the composition of microbial aerosol communities in ambient or clear conditions. Here we suggest that fog microbes can possess specific traits that enhance nucleation, altering the transport and deposition of marine- and soil-derived organic matter in terrestrial systems.

Evaluation of human factors in interface design in main control rooms

International Nuclear Information System (INIS)

Hwang, S.-L.; Liang, S.-F.M.; Liu, T.-Y.Y.; Yang, Y.-J.; Chen, P.-Y.; Chuang, C.-F.

2009-01-01

An evaluation of human factors in a new nuclear power plant was conducted prior to the beginning of any business operations. After the task analysis and observation of training, two stages of interviews were carried out with the operators in the Fourth Nuclear Power Plant (NPP4). The main concerns identified were problems resulting from the operating interface of the display and controls in the main control room, usability of procedures, and the layout of the main control room. The latent human errors and suggestions were listed, and the top three problems were analyzed. The operators indicated that the alarm design issues and the critical problem of the operating mode with the VDU were worth further study in order to provide suggestions for a new interface design for future power plants.

A near-infrared survey for pre-main sequence stars in Taurus

Science.gov (United States)

Gomez, Mercedes; Kenyon, Scott J.; Hartmann, Lee

1994-01-01

We present a near-infrared survey of approximately 2 sq deg covering parts of L1537, L1538, and Heiles cloud 2 in the Taurus-Auriga molecular cloud. Although this study is more sensitive than previous attempts to identify pre-main sequence stars in Taurus-Auriga, our survey regions contain only one new optically visible, young star. We did find several candidate embedded protostars; additional 10 micrometer photometry is necessary to verify the pre-main sequence nature of these sources. Our results--combined with those of previous surveys--show that the L1537/L1538 clouds contain no pre-main sequence stars. These two clouds are less dense than the active star formation sites in Taurus-Auriga, which suggests a cloud must achieve a threshold density to form stars.

Water Density Raster Images for the Gulf of Maine

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This geodatabase contains water density raster images for the Gulf of Maine that were interpolated from water density (sigma t or kilograms/ meters cubed) point data...

Simulation and analysis of main steam control system based on heat transfer calculation

Science.gov (United States)

Huang, Zhenqun; Li, Ruyan; Feng, Zhongbao; Wang, Songhan; Li, Wenbo; Cheng, Jiwei; Jin, Yingai

2018-05-01

In this paper, after thermal power plant 300MW boiler was studied, mat lab was used to write calculation program about heat transfer process between the main steam and boiler flue gas and amount of water was calculated to ensure the main steam temperature keeping in target temperature. Then heat transfer calculation program was introduced into Simulink simulation platform based on control system multiple models switching and heat transfer calculation. The results show that multiple models switching control system based on heat transfer calculation not only overcome the large inertia of main stream temperature, a large hysteresis characteristic of main stream temperature, but also adapted to the boiler load changing.

Maine DOT Research Peer Exchange : June 13-15, 2017

Science.gov (United States)

2017-10-13

On June 13 15, 2017 the Maine Department of Transportation hosted a research peer exchange to promote the research program within the department, provide a mechanism for sharing research management ideas amongst the team members, identify opportun...

A random walk down Main Street

Directory of Open Access Journals (Sweden)

David Matthew Levinson

2016-08-01

Full Text Available US suburbs have often been characterized by their relatively low walk accessibility compared to more urban environments, and US urban environments have been char- acterized by low walk accessibility compared to cities in other countries. Lower overall density in the suburbs implies that activities, if spread out, would have a greater distance between them. But why should activities be spread out instead of developed contiguously? This brief research note builds a positive model for the emergence of contiguous development along “Main Street” to illustrate the trade-offs that result in the built environment we observe. It then suggests some policy interventions to place a “thumb on the scale” to choose which parcels will develop in which sequence to achieve socially preferred outcomes.

Pre-main sequence masses and the age spread in the Orion cluster

International Nuclear Information System (INIS)

McNamara, B.J.

1975-01-01

The spread in formation times for stars earlier than GO in the Orion cluster is investigated. The range of stellar ages in this cluster is found to extend from at least 10 6 years to about 10 7 years. On the basis of this evidence and the similarity of the color--magnitude diagrams of other young clusters to the Orion cluster, it is suggested that the current method of dating these clusters (from the point at which the most massive stars just reach the zero-age main sequence) might not be valid. The masses of forty-one pre-main sequence stars within the ranges 4.05 less than or equal to log(Te) less than or equal to 3.77 and 0.6 less than or equal to log (L/L/sub sun/) less than or equal to 2.1 are determined from observed effective temperatures, luminosities, and gravities. These masses were then compared with those expected from Iben's (1965) pre-main sequence evolutionary calculations. In most cases, the agreement between these values was found to be within the observational errors. Finally, the pre-main sequence stars possessing infrared excesses are found to be apparently among the most massive and youngest stars still contracting toward the zero-age main sequence

Main challenges of residential areas

Directory of Open Access Journals (Sweden)

Oana Luca

2017-06-01

Full Text Available The present article is a position paper aiming to initiate a professional debate related to the aspects related to the urban dysfunctions leading to the wear of the residential areas. The paper proposes a definition of the wear process, identify the main causes leading to its occurrence and propose a number of solutions to neutralise the dysfunctions. The three wearing phases of residential areas components are emphasized, exploring their lifecycle. In order to perform the study of urban wear, the status of the residential areas components can be established and monitored, and also the variables of the function that can mathematically model the specific wear process may be considered. The paper is considered a first step for the model adjustment, to be tested and validated in the following steps. Based on the mathematical method and model, there can be created, in a potential future research, the possibility of determining the precarity degree for residential areas/neighbourhoods and cities, by minimising the subjective component of the analyses preceding the decision for renovation or regeneration.

The design and manufacture of the Fermilab Main Injector Dipole Magnet

International Nuclear Information System (INIS)

Brown, B.C.; Chester, N.S.; Harding, D.J.; Martin, P.S.

1992-03-01

Fermilab's new Main Injector Ring (MIR) will replace the currently operating Main Ring to provide 150 GeV Proton and Antiproton beams for Tevetron injection, and rapid cycling, high intensity, 120 GeV Proton beams for Antiproton production. To produce and maintain the required high beam quality, high intensity, and high repetition rate, conventional dipole magnets with laminated iron core and water cooled copper conductor were chosen as the bending magnet. A new magnet design having low inductance, large copper cross section, and field uniformity sufficient for high intensity injection and efficient slow resonant extraction, is required to obtain the needed geometric aperture, dynamic aperture, and operational reliability. The current Main Injector Ring lattice design requires the use of 344 of these magnets. 216 of these magnets are to be 6 m long, and 128 are to be 4 m long

The effect of using a fungicide along with bactericide in the main ...

African Journals Online (AJOL)

quarternized compounds), and a fungicide (2-thiocyanomethylthio benzothiazole based) commonly used in Turkish leather industry were chosen. The bactericides were added into the main soaking float with and without different concentrations of fungicide. In each trial, liquor samples were taken at the end of the main ...

Spatial variability of anaerobic processes and wastewater pH in force mains

DEFF Research Database (Denmark)

Rudelle, Elise Alice; Nielsen, Asbjørn Haaning; Hvitved-Jacobsen, Thorkild

2016-01-01

The present study focuses on anaerobic organic matter transformation processes in force mains for the purpose of improving existing sewer process models. Wastewater samples were obtained at 100 m intervals from a 1 km long pilot scale force main and measured for several wastewater parameters. Tra...

Down dead wood statistics for Maine timberlands, 1995

Science.gov (United States)

Linda S. Heath; David C. Chojnacky; David C. Chojnacky

2001-01-01

Down dead wood (DDW) is important for its role in carbon and nutrient cycling, carbon sequestration, wildfire behavior, plant reproduction, and wildlife habitat. DDW was measured for the first time during a forest inventory of Maine by the USDA Forest Service in 1994-1996. Pieces greater than 3 feet long and greater than 3 inches in diameter at point of intersection...

Main components and content of sports volunteer activities

OpenAIRE

Петренко, Ірина

2017-01-01

Iryna PetrenkоPurpose: identification of the main structural components and content of sports volunteer activities. Material & Methods: used analysis of literature and documents, organizational analysis. Result: basic structural components of sports volunteer activity are defined. The content of sports volunteer activity is disclosed. Conclusion: sports volunteer activity includes the following structural components: subject, object, purpose, motivation, means, actions; subject is a sport...

Finnsjoen study site. Scope of activities and main results

International Nuclear Information System (INIS)

Ahlbom, K.; Andersson, J.E.; Andersson, Peter; Ittner, T.; Tiren, S.; Ljunggren, C.

1992-12-01

The Finnsjoen study site was selected in 1977 to provide input to the KBS-1 and KBS-2 performance assessments. The site was later used as a test site for testing new instruments and new site characterization methods, as well as a research site for studying mainly groundwater flow and groundwater transport. All together, the Finnsjoen studies have involved 11 cored boreholes, down to max 700 m depth, and extensive borehole geophysical, geochemical and geohydraulic measurements, as well as rock stress measurements and tracer tests. This report presents the scope of the Finnsjoen studies together with main results. Conceptual uncertainties in assumptions and models are discussed with emphasis on the models used for the performance assessment SKB91. Of special interest for the Finnsjoen study site is the strong influence caused by a subhorizontal fracture zone on groundwater flow, transport and chemistry

A Unified Buffering Management with Set Divisible Cache for PCM Main Memory

Institute of Scientific and Technical Information of China (English)

Mei-Ying Bian; Su-Kyung Yoon; Jeong-Geun Kim; Sangjae Nam; Shin-Dug Kim

2016-01-01

This research proposes a phase-change memory (PCM) based main memory system with an effective combi-nation of a superblock-based adaptive buffering structure and its associated set divisible last-level cache (LLC). To achieve high performance similar to that of dynamic random-access memory (DRAM) based main memory, the superblock-based adaptive buffer (SABU) is comprised of dual DRAM buffers, i.e., an aggressive superblock-based pre-fetching buffer (SBPB) and an adaptive sub-block reusing buffer (SBRB), and a set divisible LLC based on a cache space optimization scheme. According to our experiment, the longer PCM access latency can typically be hidden using our proposed SABU, which can significantly reduce the number of writes over the PCM main memory by 26.44%. The SABU approach can reduce PCM access latency up to 0.43 times, compared with conventional DRAM main memory. Meanwhile, the average memory energy consumption can be reduced by 19.7%.

The Logical-Semantic Basis for Formation of Main Components of Enterprise Strategy

Directory of Open Access Journals (Sweden)

Polyakova Yana O.

2016-11-01

Full Text Available The modern interpretation of the essence of enterprise strategy implies transformation of internal characteristics of the enterprise into key success factors in accordance with conditions of the functioning of external environment in order to ensure its sustainable leadership position in the long term and is one of the main elements of the system of enterprise strategic management in today’s business environment. The result of the conducted research is the improvement of the logical-semantic structure of main components of enterprise strategy through the implementation of research by the inductive method, which allowed to determine the logical sequence of stages of forming key success factors, reveal the conditions for transformation of main elements of each stage and conduct a semantic evaluation of the structure of main components of enterprise strategy at each individual stage to implement the processes of goal setting and evaluate results of the implementation of the chosen business strategy.

Fenestration of a Papyrus PK covered stent to recover the occluded left main bifurcation after sealing a left main perforation during a CTO procedure.

Science.gov (United States)

Werner, Gerald S; Ahmed, Waqar H

2017-09-01

Covered stents are indicated for coronary perforations, but they may seal off major side branches in that process. We report the successful sealing of an ostial left main perforation, induced by a guide catheter in the course of a retrograde approach to treat a chronic total occlusion (CTO) of the right coronary artery (RCA) in a 76year old woman with prior CABG. The implanted Papyrus covered stent, however, overlapped the left main bifurcation and occluded the non-grafted circumflex artery (CX) resulting in acute ischemia. Through a double lumen catheter advanced over the wire located in the left anterior descending coronary artery (LAD) territory, a stiff recanalization wire could be advanced from the side-port to penetrate the stent membrane towards the CX. This was successfully achieved, and after subsequent dilatation, a drug-eluting stent was implanted in Culotte-fashion from the CX to the left main with subsequent kissing-balloon dilatation. The clinical symptoms subsided immediately, and the RCA was finally recanalized in antegrade parallel wire technique. No periprocedural infarct was observed during 48h of follow-up before discharge. At clinical follow-up of 6months the patient is symptom-free. Copyright © 2017 Elsevier Inc. All rights reserved.

Simultaneous kissing stents for the treatment of left main stenosis in cardiogenic shock

International Nuclear Information System (INIS)

Rahman, N.; Dhakam, S.; Nadeem, N.

2007-01-01

Significant narrowing of the left main coronary artery puts the patient at high risk, since occlusion of this vessel, if unprotected by collateral flow or a patent bypass graft to either the left anterior descending or circumflex artery, compromises flow to approximately 75% of the left ventricle. Percutaneous coronary intervention of left main coronary artery may be the only life saving procedure. There are limited data on the general use of percutaneous intervention (PCI) in patients with acute myocardial infarction (MI) due to left main disease. Small series have noted in-hospital mortality rates of 30 to 35 percent following PCI with or without stenting. Moreover, cardiogenic shock secondary to acute MI, in patients with left main coronary artery disease, carries a very high mortality. Treatment options are limited especially when emergent coronary artery bypass surgery is not an option. We report a case of emergency angioplasty of left main coronary artery with simultaneous kissing stent technique in cardiogenic shock. (author)

Unbalanced Impedance of the Aperture Coils of Some LHC Main Dipole Magnets

NARCIS (Netherlands)

Ravaioli, Emanuele; Verweij, A.P.; ten Kate, Herman H.J.

2013-01-01

During the Large Hadron Collider operation in 2010 and 2011, it was observed that about 50% of the main dipole magnets exhibiting two apertures showed unbalanced dynamic-impedance behavior not well understood. When a main dipole circuit is switched off, voltage waves with a frequency of 28 Hz travel

IMPROVING STRUCTURAL INTEGRITY MONITORING CAPABILITY FOR WATER MAINS: COLLABORATION EFFORTS AND OPPORTUNITIES

Science.gov (United States)

The structural integrity of the approximately 1,000,000 miles of U.S. water mains is important to both immediate and long-term drinking water quality and availability. As pipes wear out, leaks and main breaks increase, as well as the associated occurrences of water loss and low-...

Two-Level Designs to Estimate All Main Effects and Two-Factor Interactions

NARCIS (Netherlands)

Eendebak, P.T.; Schoen, E.D.

2017-01-01

We study the design of two-level experiments with N runs and n factors large enough to estimate the interaction model, which contains all the main effects and all the two-factor interactions. Yet, an effect hierarchy assumption suggests that main effect estimation should be given more prominence

A winter severity index for the state of Maine.

Science.gov (United States)

2009-01-01

Winter maintenance in the Sate of Maine consumes around twenty percent of the Bureau of : Maintenance and Operations budget each year. Costs are directly related to the length and severity : of a winter season. In addition, the cost of materials and ...

The main trends in clinical use of radionuclides in oncology

International Nuclear Information System (INIS)

Agranat, V.Z.

1979-01-01

The main trends of using radionuclide methods in clinical oncology are shown. Two main aspects of using radionuclide methods are pointed out: radionuclide investigation of the primary tumour as ''local'' manifestation of the cancer disease, radionuclide investigation of the body ''response'' to the tumour process. Each of the aspects of the problem is briefly considered on some examples. Examples of positive scintigraphy of tumours are given. It is shown that tumorotropic properties of some radionuclides make possible using visualization methods realizing the differential diagnosis of some tumours. Considered are direct and indirect signs which allow determining the presence of metastases and testifying to the tumour process spread

[Cracow medical chamber in the special collection of the main medical library].

Science.gov (United States)

Szkudaj, T

2000-01-01

The article on Cracow Medical Chamber in the Special Collection of the Main Medical Library concerns the history of establishing medical chambers and covers the period from 1893 to 1950. It presents in detail the territorial extent of Cracow Medical Chamber, its membership and presidents' functions as well as the composition of its various boards and councils. It also talks about the legal acts regulating the functioning of medical chambers and their sphere of activity. The collection of archived records kept in the Special Collection of Main Medical Library constitutes a small percentage of the preserved records; these being mainly personal files of doctors comprising personal questionnaires, registration cards and photographs.

Advertising investigation and the main sociodemo graphic internet studies in Mexico

OpenAIRE

Islas, Octavio

2014-01-01

In the first section of this article the main sociodemographic internetstudies in Mexico are presented. I highlight some of their main methodological differences and proceed to analyze some key results in these recent studies. Based on the seventh edition of the Online Advertising Expedinture Study in Mexico, the second section demonstrates the weight of internet advertising in Mexico today. En el primer apartado refiero cuáles son los principales estudiossociodemográficos de Internet en M...

Solitary main pancreatic ductal calculus of possible biliary origin causing acute pancreatitis.

Science.gov (United States)

Chaparala, Ramakrishna Prasad Chowdary; Patel, Rafiuddin; Guthrie, James Ahsley; Davies, Mervyn Huw; Guillou, Pierre J; Menon, Krishna V

2005-09-10

Pancreatic ductal calculi are most often associated with chronic pancreatitis. Radiological features of chronic pancreatitis are readily evident in the presence of these calculi. However, acute pancreatitis due to a solitary main pancreatic ductal calculus of biliary origin is rare. A 59-year-old man presented with a first episode of acute pancreatitis. Contrast enhanced computerized tomography (CT) scan and endoscopic retrograde cholangiopancreatography (ERCP) revealed a calculus in the main pancreatic duct in the head of the pancreas causing acute pancreatitis. There were no features suggestive of chronic pancreatitis on CT scanning. The episode acute pancreatitis was managed conservatively. ERCP extraction of the calculus failed as the stone was impacted in the main pancreatic duct resulting in severe acute pancreatitis. Once this resolved, a transduodenal exploration and extraction of the pancreatic ductal calculus was performed successfully. Crystallographic analysis revealed the composition of the calculus was different to that seen in chronic pancreatitis, but more in keeping with a calculus of biliary origin. This could be explained by migration of the biliary calculus via the common channel into the main pancreatic duct. Following the operation the patient made an uneventful recovery and was well at two-year follow up. Acute pancreatitis due to a solitary main pancreatic ductal calculus of biliary origin is rare. Failing endoscopic extraction, transduodenal exploration and extraction is a safe option after resolution of acute pancreatitis.

Component biomass equations for black spruce in Maine

Science.gov (United States)

M. M. Czapowskyj; D. J. Robison; R. D. Briggs; E. H. White; E. H. White

1985-01-01

Component biomass prediction equations are presented for young black spruce (Picea mariana B.S.P. (Mill,:)) in northern Maine. A weighted least squares model was used to construct the eq~iationsfo r small trees from 1 to 15 cm d.b.h., and an ordinary least squares model for trees less than 2 m in height. A linearized allometric model was also tested but was not used....

Comparative Analysis of the Main Business Intelligence Solutions

OpenAIRE

Alexandra RUSANEANU

2013-01-01

Nowadays, Business Intelligence solutions are the main tools for analyzing and monitoring the company’s performance at any organizational level. This paper presents a comparative analysis of the most powerful Business Intelligence solutions using a set of technical features such as infrastructure of the platform, development facilities, complex analysis tools, interactive dashboards and scorecards, mobile integration and complex implementation of performance management methodologies.

Motor-generator set of the PS main supply

CERN Multimedia

Photographic Service; CERN PhotoLab

1968-01-01

Already in 1964, the PS improvement programme included a new main magnet supply with more power for the longer cycles needed for slow extraction at the full energy of 26 GeV. This motor-generator set was installed in 1967 and took up service at the beginning of 1968. Regularly serviced and fitted with modern electronic regulation, it pulses the PS to this day.

Crossing geometry for Main Ring on Doubler collisions

International Nuclear Information System (INIS)

Diebold, R.

1977-01-01

There are two basic methods for bringing about Main Ring on Doubler collisions: the transposed, and kissing geometries. Examples of both are discussed assuming maximum momenta of 250 on 1000 GeV/c. The magnets required to bring the beams into small-angle collision are substantial in both cases. Detailed engineering work will be required to distinguish a substantial cost advantage of one geometry over the other

Main building of the Paks nuclear power plant, Hungary

International Nuclear Information System (INIS)

Fejes, A.

1983-01-01

The general layout of the main service building of the power plant, the applied building materials as well as the prefabricated structures are described. The conditions of planning and construction are discussed. Novel construction methods under the given conditions were utilized. (author)

2013 USGS-NRCS Lidar: Maine (Cumberland, Kennebec and York)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — TASK NAME: NRCS Maine 0.7M NPS LIDAR LiDAR Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G13PD00954 Woolpert Order No....

PS main supply: motor-generator set.

CERN Multimedia

Maximilien Brice

2002-01-01

In picture 04 the motor is on the right in the background and the main view is of the generator. The peak power in each PS cycle drawn from the generator, up to 96 MW, is taken from the rotational kinetic energy of the rotor (a heavy-weight of 80 tons), which makes the rotational speed drop by only a few percent. The motor replenishes the average power of 2 to 4 MW. Photo 05: The motor-generator set is serviced every year and, in particular, bearings and slip-rings are carefully checked. To the left is the motor with its slip-rings visible. It has been detached from the axle and moved to the side, so that the rotor can be removed from the huge generator, looming at the right.

Percutaneous Coronary Intervention of Left Main Disease: Pre- and Post-EXCEL (Evaluation of XIENCE Everolimus Eluting Stent Versus Coronary Artery Bypass Surgery for Effectiveness of Left Main Revascularization) and NOBLE (Nordic-Baltic-British Left Main Revascularization Study) Era.

Science.gov (United States)

Park, Duk-Woo; Park, Seung-Jung

2017-06-01

For nearly half a century, coronary artery bypass grafting has been the standard treatment for patients with obstructive left main coronary artery (LMCA) disease. However, there has been considerable evolution in the field of percutaneous coronary intervention, and especially, percutaneous coronary intervention for LMCA disease has been rapidly expanded with adoption of drug-eluting stents. Some, but not all randomized trials, have shown that percutaneous coronary intervention with drug-eluting stents might be a suitable alternative for selected patients with LMCA disease instead of bypass surgery. However, none of previous trials involving early-generation drug-eluting stents was sufficiently powered and comparative trials using contemporary drug-eluting stents were limited. Recently, primary results of 2 new trials of EXCEL (Evaluation of XIENCE Everolimus Eluting Stent Versus Coronary Artery Bypass Surgery for Effectiveness of Left Main Revascularization) and NOBLE (Nordic-Baltic-British Left Main Revascularization Study) were reported. However, these trials showed conflicting results, which might pose uncertainty on the optimal revascularization strategy for LMCA disease. In this article, with the incorporation of a key review on evolution of LMCA treatment, we summarize the similarity or disparity of the EXCEL and NOBLE trials, focus on how they relate to previous trials in the field, and finally speculate on how the treatment strategy may be changed or recommended for LMCA treatment. © 2017 American Heart Association, Inc.

Asteroid family dynamics in the inner main belt

Science.gov (United States)

Dykhuis, Melissa Joy

The inner main asteroid belt is an important source of near-Earth objects and terrestrial planet impactors; however, the dynamics and history of this region are challenging to understand, due to its high population density and the presence of multiple orbital resonances. This dissertation explores the properties of two of the most populous inner main belt family groups --- the Flora family and the Nysa-Polana complex --- investigating their memberships, ages, spin properties, collision dynamics, and range in orbital and reflectance parameters. Though diffuse, the family associated with asteroid (8) Flora dominates the inner main belt in terms of the extent of its members in orbital parameter space, resulting in its significant overlap with multiple neighboring families. This dissertation introduces a new method for membership determination (the core sample method) which enables the distinction of the Flora family from the background, permitting its further analysis. The Flora family is shown to have a signature in plots of semimajor axis vs. size consistent with that expected for a collisional family dispersed as a result of the Yarkovsky radiation effect. The family's age is determined from the Yarkovsky dispersion to be 950 My. Furthermore, a survey of the spin sense of 21 Flora-region asteroids, accomplished via a time-efficient modification of the epoch method for spin sense determination, confirms the single-collision Yarkovsky-dispersed model for the family's origin. The neighboring Nysa-Polana complex is the likely source region for many of the carbonaceous near-Earth asteroids, several of which are important targets for spacecraft reconnaissance and sample return missions. Family identification in the Nysa-Polana complex via the core sample method reveals two families associated with asteroid (135) Hertha, both with distinct age and reflectance properties. The larger of these two families demonstrates a correlation in semimajor axis and eccentricity

Beam position measurement system at the Fermilab main accelerator

International Nuclear Information System (INIS)

Kerns, Q.A.

1975-01-01

The beam position system of the Fermilab Main Ring contains one horizontal and one vertical Electrostatic Beam Pickup in each of the 96 cells of the machine. A pair of 75 ohm cables transmits the induced signal from the machine tunnel to the nearest service building. In each of the 24 service buildings, there is a solid-state multiplexer and a beam position detector which processes the A-B signal pairs to produce an intensity-normalized voltage proportional to beam displacement. This voltage is digitized, read into buffer of the Lockheed MAC A, and in turn transferred to the Xerox 530. Horizontal or vertical orbits can be obtained in 50 millisec. Orbits are obtained at injection and at a Main Ring Sample time, if requested, anywhere on the acceleration cycle. Injection orbits can be flattened automatically by a program that sets dipole trim magnets. (auth)

Electron Cloud Measurements in Fermilab Main Injector and Recycler

Energy Technology Data Exchange (ETDEWEB)

Eldred, Jeffrey Scott [Indiana U.; Backfish, M. [Fermilab; Tan, C. Y. [Fermilab; Zwaska, R. [Fermilab

2015-06-01

This conference paper presents a series of electron cloud measurements in the Fermilab Main Injector and Recycler. A new instability was observed in the Recycler in July 2014 that generates a fast transverse excitation in the first high intensity batch to be injected. Microwave measurements of electron cloud in the Recycler show a corresponding depen- dence on the batch injection pattern. These electron cloud measurements are compared to those made with a retard- ing field analyzer (RFA) installed in a field-free region of the Recycler in November. RFAs are also used in the Main Injector to evaluate the performance of beampipe coatings for the mitigation of electron cloud. Contamination from an unexpected vacuum leak revealed a potential vulnerability in the amorphous carbon beampipe coating. The diamond-like carbon coating, in contrast, reduced the electron cloud signal to 1% of that measured in uncoated stainless steel beampipe.

The modification of main steam safety valves in Qinshan phase Ⅱ expansion project

International Nuclear Information System (INIS)

Chen Haiqiao

2012-01-01

The main steam safety valves of NPP steam system are second- class nuclear safety component. It used to limit the pressure of SG secondary side and main steam system via emitting steam into the environment. At present, the main steam safety valves have mechanical valves and assisted power valves. According to the experience of power plants at home and abroad, including Qinshan Phase Ⅱ unit 1/2 experience feedback, Qinshan Phase Ⅱ expansion project made modification on valve type, setting value and valve body. This paper introduce the characteristics of different safety valve types, the modification of main steam safety valves and the modification analysis on safety issues.security and impact on the other systems in Qinshan Phase Ⅱ expansion project. (author)

Modern wind energy technology for Russian applications. Main report

Energy Technology Data Exchange (ETDEWEB)

Hauge Madsen, P.; Winther-Jensen, M., Bindner, H.W. [and others

1999-05-01

The general objective of the project is to establish a technical foundation for an intensified application of wind energy in Russia with medium to large wind turbines and transfer/adaptation of Danish and European wind turbine technology as a basis for future joint ventures and technology exports. More specifically, the objective is to develop and establish the basic knowledge and design criteria for adaptation and development of Danish wind turbine technology for application under Russian conditions. The research programme is envisaged to be carried out in three phases, the first phase being the project reported herein. The main purpose of phase 1 is to assess the needs for modifications and adaptations of established standard (in casu Danish) wind turbine designs for decentralised energy systems with a limited number of medium sized wind turbines and for grid connected wind turbines in cold climate and in-land sites of Russia. As part of this work it is necessary to clarify the types of operational conditions and requirements that are to be met by wind turbines operating in such conditions, and to outline suitable test procedures and test set-up is for verifications of such adapted and modified wind turbines. The reporting of this project is made in one main report and four topical reports, all of them issued as Risoe reports. This is the Main Report, (Risoe-R-1069), summing up the activities and findings of phase 1 and outlining a strategy for Russian-Danish cooperation in wind energy as agreed upon between the Russian and the Danish parties. (au)

High resolution main-ion charge exchange spectroscopy in the DIII-D H-mode pedestal.

Science.gov (United States)

Grierson, B A; Burrell, K H; Chrystal, C; Groebner, R J; Haskey, S R; Kaplan, D H

2016-11-01

A new high spatial resolution main-ion (deuterium) charge-exchange spectroscopy system covering the tokamak boundary region has been installed on the DIII-D tokamak. Sixteen new edge main-ion charge-exchange recombination sightlines have been combined with nineteen impurity sightlines in a tangentially viewing geometry on the DIII-D midplane with an interleaving design that achieves 8 mm inter-channel radial resolution for detailed profiles of main-ion temperature, velocity, charge-exchange emission, and neutral beam emission. At the plasma boundary, we find a strong enhancement of the main-ion toroidal velocity that exceeds the impurity velocity by a factor of two. The unique combination of experimentally measured main-ion and impurity profiles provides a powerful quasi-neutrality constraint for reconstruction of tokamak H-mode pedestals.

Effects of main-sequence mass loss on stellar and galactic chemical evolution

International Nuclear Information System (INIS)

Guzik, J.A.

1988-01-01

L.A. Willson, G.H. Bowen and C. Struck-Marcell have proposed that 1 to 3 solar mass stars may experience evolutionarily significant mass loss during the early part of their main-sequence phase. The suggested mass-loss mechanism is pulsation, facilitated by rapid rotation. Initial mass-loss rates may be as large as several times 10 -9 M mass of sun/yr, diminishing over several times 10 8 years. The author attempts to test this hypothesis by comparing some theoretical implications with observations. Three areas are addressed: Solar models, cluster HR diagrams, and galactic chemical evolution. Mass-losing solar models were evolved that match the Sun's luminosity and radius at its present age. The most extreme viable models have initial mass 2.0 M 0 , and mass-loss rates decreasing exponentially over 2-3 x 10 8 years. Evolution calculations incorporating main-sequence mass loss were completed for a grid of models with initial masses 1.25 to 2.0 M mass of sun and mass loss timescales 0.2 to 2.0 Gry. Cluster HR diagrams synthesized with these models confirm the potential for the hypothesis to explain observed spreads or bifurcations in the upper main sequence, blue stragglers, anomalous giants, and poor fits of main-sequence turnoffs by standard isochrones. Simple closed galactic chemical evolution models were used to test the effects of main-sequence mass loss on the F and G dwarf distribution. Stars between 3.0 M mass of sun and a metallicity-dependent lower mass are assumed to lose mass. The models produce a 30 to 60% increase in the stars to stars-plus-remnants ratio, with fewer early-F dwarfs and many more late-F dwarfs remaining on the main sequence to the present

Schemes for applying active lubrication to main engine bearings

DEFF Research Database (Denmark)

Estupinan, Edgar Alberto; Santos, Ilmar

2009-01-01

-difference method. The computed bearing fluid film forces are coupled to the set of nonlinear equations that describes the dynamics of the reciprocating engine, obtained with the help of multibody dynamics (rigid components) and finite elements method (flexible components). The main equations that govern...

The main requirements of the International Basic Safety Standards

International Nuclear Information System (INIS)

Webb, G.A.M.

1998-01-01

The main requirements of the new international basic safety standards are discussed, including such topics as health effects of ionizing radiations, the revision of basic safety standards, the requirements for radiation protection practices, the requirements for intervention,and the field of regulatory infrastructures. (A.K.)

Normal anatomy and MR findings of fetal main organs at MR imaging

International Nuclear Information System (INIS)

Xia Liming; Zou Mingli; Feng Dingyi; Hu Junwu; Qi Jianpin; Wang Chengyuan

2005-01-01

Objective: To investigate normal anatomy and MR findings of fetal main organs. Methods: Forty-seven fetus underwented fast MR imaging, SSFSE sequence was used, the normal anatomy and MR findings of fetal main organs was observed in different gestational age. The organs included: brain, lungs, heart, liver, spleen, gastrointestinal tract, urinary collecting systems, bladder, bones, spine, and subcutaneous fat. Results: Results of MR in 47 fetus showed that the main organs had developed by 20-week-old fetus, about 20 weeks gestation, cerebral cortical surface was smooth, no cortical gyri and sulci, then cortical gyri and sulci developed slowly. The lungs, trachea, bronchus, gastrointestinal tract, renal collecting system and bladder showed high signal intensity; the heart, great vessels, liver, spleen, bones and muscles appeared hypointense; the kidneys appeared isointense, the spine had developed and subcutaneous fat was seen in 20-week-old fetus, the subcutaneous fat increased with fetus maturating. Conclusion: Normal anatomy and MR findings of fetal main organs were clearly showed by fast MR imaging, and they are different from the newborns. (authors)

Super Phenix 1: in Service inspection of main and safety tanks weldments

International Nuclear Information System (INIS)

Asty, Michel; Vertut, Jean; Argous, J.P.

1980-05-01

In service inspection of the main tank of the Super Phenix 1 reactor is a new demand as compared to Phenix: the authorities have asked that surface and internal defects could be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks

Super Phenix 1: In-service inspection of main and safety tanks weldments

Energy Technology Data Exchange (ETDEWEB)

Asty, M [DTech/STA, Centre d' Etudes Nucleaires de Saclay (France); Vertut, J [DPR/STEP, Centre d' Etudes Nucleaires de Saclay (France); Argous, J P [DRNR/STRS, Centre d' Etudes Nucleaires de Cadarache (France)

1980-11-01

In Service Inspection of the main tank of the Super Phenix 1 reactor is a new demand compared to Phenix: the authorities have asked that surface and internal defects be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks. (author)

Main factors in E-Learning for the Equivalency Education Program (E-LEEP)

Science.gov (United States)

Yel, M. B.; Sfenrianto

2018-03-01

There is a tremendous learning gap between formal education and non-formal education. E-Learning can facilitate non-formal education learners in improving the learning process. In this study, we present the main factors behind the E-learning for the Equivalency Education Program (E-LEEP) initiative in Indonesia. There are four main factors proposed, namely: standardization, learning materials, learning process, and learners’ characteristics. Each factor supports each other to achieve the learning process of E-LEEP in Indonesia. Although not yet proven, the E-learning should be developed followed the main factors for the non-formal education. This is because those factors can improve the quality of E-Learning for the Equivalency Education Program.

Super Phenix 1: In-service inspection of main and safety tanks weldments

International Nuclear Information System (INIS)

Asty, M.; Vertut, J.; Argous, J.P.

1980-01-01

In Service Inspection of the main tank of the Super Phenix 1 reactor is a new demand compared to Phenix: the authorities have asked that surface and internal defects be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks. (author)

49 CFR 192.369 - Service lines: Connections to cast iron or ductile iron mains.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Service lines: Connections to cast iron or ductile iron mains. 192.369 Section 192.369 Transportation Other Regulations Relating to Transportation... ductile iron mains. (a) Each service line connected to a cast iron or ductile iron main must be connected...

The formal operations: Piaget’s concept, researches and main critics

Directory of Open Access Journals (Sweden)

Stepanović Ivana Ž.

2004-01-01

Full Text Available This paper deals with Piaget's concept of formal operations, formal operations researches and critics related to the concept. The first part of the work is dedicated to the formal operations concept. The main characteristics of formal operational thought and formal operations structure, as well as structure logical model are presented in that part of the work. The second part is a review of formal operational researches and it is divided in three parts: (1 problems of researches (2 characteristics of applied methodology and (3 author approaches as a specific research context. In the last part of the work the main critics of formal operations concept are presented and discussed.

Some peat deposits in Penobscot County, Maine

Science.gov (United States)

Cameron, Cornelia Clermont; Anderson, Walter A.

1979-01-01

Twenty of the peat deposits in Penobscot County, Maine contain an estimated 29,282,000 short tons air-dried peat. The peat is chiefly sphagnum moss and reed-sedge of high quality according to ASTM standards for agricultural and horticultural use. Analyses show that this same volume has high fuel value, low sulfur and high hydrogen contents compared with lignite and sub-bituminous coal, which may indicate that it also has potential for fuel use. On the basis of the metallic trace element content, one area within the region containing the 20 deposits has been delineated for further bedrock studies.

Musculoskeletal disorders in main battle tank personnel

DEFF Research Database (Denmark)

Nissen, Lars Ravnborg; Guldager, Bernadette; Gyntelberg, Finn

2009-01-01

PURPOSE: To compare the prevalence of musculoskeletal disorders of personnel in the main battle tank (MBT) units in the Danish army with those of personnel in other types of army units, and to investigate associations between job function in the tank, military rank, and musculoskeletal problems......, and ankle. RESULTS AND CONCLUSIONS: There were only 4 women in the MBT group; as a consequence, female personnel were excluded from the study. The participation rate was 58.0% (n = 184) in the MBT group and 56.3% (n = 333) in the reference group. The pattern of musculoskeletal disorders among personnel...

Space Shuttle Main Engine Public Test Firing

Science.gov (United States)

2000-01-01

A new NASA Space Shuttle Main Engine (SSME) roars to the approval of more than 2,000 people who came to John C. Stennis Space Center in Hancock County, Miss., on July 25 for a flight-certification test of the SSME Block II configuration. The engine, a new and significantly upgraded shuttle engine, was delivered to NASA's Kennedy Space Center in Florida for use on future shuttle missions. Spectators were able to experience the 'shake, rattle and roar' of the engine, which ran for 520 seconds - the length of time it takes a shuttle to reach orbit.

Main challenges in demulsifier research and application

Science.gov (United States)

Zhang, Fusheng; Liu, Guoliang; Ma, Junhan; Ouyang, Jian; Yi, Xiaoling; Su, Huimin

2017-01-01

Main challenges in demulsifier research, such as demulsification of ASP flooding produced liquid, demulsification of heavy oil produced liquid, low temperature demulsification and fast demulsification, are summarized. Some importance technology routes to solve the challenges are proposed according to demulsification mechanisms and emulsion characteristics. The proposed routes include increasing aromaticity, molecular weight and branch degree of demulsifiers, and introducing double-function groups to demulsifiers for W/O and O/W emulsions, or groups with alkyl matching with alkyl carbon number of the crude oil into demulsifier molecule. The demulsification mechanisms of the above-mentioned research routes are described in detail.

Energy Recovery for the Main and Auxiliary Sources of Electric Vehicles

Directory of Open Access Journals (Sweden)

Binggang Cao

2010-10-01

Full Text Available Based on the traditional regenerative braking electrical circuit, a novel energy recovery system for the main and auxiliary sources of electric vehicles (EVs has been developed to improve their energy efficiency. The electrical circuit topology is presented in detail. During regenerative braking, the recovered mechanical energy is stored in both the main source and the auxiliary source at the same time. The mathematical model of the proposed system is derived step by step. Combining the merits and defects of H2 optimal control and H∞ robust control, a H2/H∞ controller is designed to guarantee both the system performance and robust stability. The perfect match between the simulated and experimental results validates the notion that the proposed novel energy recovery system is both feasible and effective, as more energy is recovered than that with the traditional energy recovery systems, in which recovered energy is stored only in the main source.

2D edge plasma modeling extended up to the main chamber

Energy Technology Data Exchange (ETDEWEB)

Dekeyser, W., E-mail: wouter.dekeyser@mech.kuleuven.be [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Leuven (Belgium); Baelmans, M. [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Leuven (Belgium); Reiter, D.; Boerner, P.; Kotov, V. [Institut fuer Plasmaphysik, Forschungszentrum Juelich GmbH, EURATOM-Association, Trilateral Euregio Cluster, D-52425 Juelich (Germany)

2011-08-01

Far SOL plasma flow, and hence main chamber recycling and plasma surface interaction, are today still only very poorly described by current 2D fluid edge codes, such as B2, UEDGE or EDGE2D, due to a common technical limitation. We have extended the B2 plasma fluid solver in the current ITER version of B2-EIRENE (SOLPS4.3) to allow plasma solutions to be obtained up to the 'real vessel wall', at least on the basis of ad hoc far SOL transport models. We apply here the kinetic Monte Carlo Code EIRENE on such plasma solutions to study effects of this model refinement on main chamber fluxes and sputtering, for an ITER configuration. We show that main chamber sputtering may be significantly modified both due to thermalization of CX neutrals in the far SOL and poloidally highly asymmetric plasma wall contact, as compared to hitherto applied teleportation of particle fluxes across this domain.

High-ratio voltage conversion in CMOS for efficient mains-connected standby

CERN Document Server

Meyvaert, Hans

2016-01-01

This book describes synergetic innovation opportunities offered by combining the field of power conversion with the field of integrated circuit (IC) design. The authors demonstrate how integrating circuits enables increased operation frequency, which can be exploited in power converters to reduce drastically the size of the discrete passive components. The authors introduce multiple power converter circuits, which are very compact as result of their high level of integration. First, the limits of high-power-density low-voltage monolithic switched-capacitor DC-DC conversion are investigated to enable on-chip power granularization. AC-DC conversion from the mains to a low voltage DC is discussed, enabling an efficient and compact, lower-power auxiliary power supply to take over the power delivery during the standby mode of mains-connected appliances, allowing the main power converter of these devices to be shut down fully. Discusses high-power-density monolithic switched-capacitor DC-DC conversion in bulk CMOS,...

Claude Bernard: bicentenary of birth and his main contributions to neurology

Directory of Open Access Journals (Sweden)

Marleide da Mota Gomes

2014-04-01

Full Text Available Claude Bernard (1813-1878 followed two main research paths: the chemical and physiological study of digestion and liver function, along with experimental section of nerves and studies on sympathetic nerves. Curare studies were, for example, of longstanding interest. His profound mental creativity and hand skillfulness, besides methodology quality, directed his experiments and findings, mainly at the Collège de France. His broader and epistemological concerns were carried out at the Sorbonne and later at the Muséum national d'Histoire naturelle. His insight gave clues to define the “ milieu intérieur”, later known as “homeostasis”, and grasp the brain complexity. Bernard followed and surpassed his master François Magendie who also fought against dogmas and laid the foundations of experimental medicine, and its main heinous tool – vivisection. Bernard created the methodological bases of experimental medicine, and collected honors as a renowned researcher.

Energy Recovery for the Main and Auxiliary Sources of Electric Vehicles

Energy Technology Data Exchange (ETDEWEB)

Min Ye [Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education, Chang’an University, Xi’an (China); Sengjie Jiao [Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education, Chang’an University, Xi’an (China); Binggang Cao [School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an (China)

2010-09-15

Based on the traditional regenerative braking electrical circuit, a novel energy recovery system for the main and auxiliary sources of electric vehicles (EVs) has been developed to improve their energy efficiency. The electrical circuit topology is presented in detail. During regenerative braking, the recovered mechanical energy is stored in both the main source and the auxiliary source at the same time. The mathematical model of the proposed system is derived step by step. Combining the merits and defects of H2 optimal control and H-infinity robust control, a H2/H-infinity controller is designed to guarantee both the system performance and robust stability. The perfect match between the simulated and experimental results validates the notion that the proposed novel energy recovery system is both feasible and effective, as more energy is recovered than that with the traditional energy recovery systems, in which recovered energy is stored only in the main source.

Energy Recovery for the Main and Auxiliary Sources of Electric Vehicles

Energy Technology Data Exchange (ETDEWEB)

Ye, M.; Jiao, S. [Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education, Chang' an University, Xi' an 710064 (China); Cao, B. [School of Mechanical Engineering, Xi' an Jiaotong University, Xi' an 710049 (China)

2010-10-15

Based on the traditional regenerative braking electrical circuit, a novel energy recovery system for the main and auxiliary sources of electric vehicles (EVs) has been developed to improve their energy efficiency. The electrical circuit topology is presented in detail. During regenerative braking, the recovered mechanical energy is stored in both the main source and the auxiliary source at the same time. The mathematical model of the proposed system is derived step by step. Combining the merits and defects of H{sub 2} optimal control and H{sub {infinity}} robust control, a H{sub 2}/H{sub {infinity}} controller is designed to guarantee both the system performance and robust stability. The perfect match between the simulated and experimental results validates the notion that the proposed novel energy recovery system is both feasible and effective, as more energy is recovered than that with the traditional energy recovery systems, in which recovered energy is stored only in the main source. (authors)

Main Issues on Electronic Commerce and Policy Recommendations

OpenAIRE

Chongwha Lee; Seongbong Lee

1998-01-01

"Electronic Commerce" means that people sell and buy commodity, labor service and information through internet and now is mainly be used in commercial intercourse. The core of the international research related to Electronic Commerce is a tax-exemption, land tax, liberalization of encrypted technology and privacy protection policy, etc. Meanwhile, intellectual property, consumer protection and limitation of packing specification are also researched together with the business activeness. The r...

Measuring main-ion temperatures in ASDEX upgrade using scattering of ECRH radiation

DEFF Research Database (Denmark)

Pedersen, Morten Stejner; Nielsen, Stefan Kragh; Jacobsen, Asger Schou

2016-01-01

We demonstrate that collective Thomson scattering of millimeter wave electron cyclotron resonance heating radiation can be used for measurements of the main-ion temperature in the ASDEX Upgrade tokamak.......We demonstrate that collective Thomson scattering of millimeter wave electron cyclotron resonance heating radiation can be used for measurements of the main-ion temperature in the ASDEX Upgrade tokamak....

Oxidative Addition and Reductive Elimination at Main-Group Element Centers.

Science.gov (United States)

Chu, Terry; Nikonov, Georgii I

2018-04-11

Oxidative addition and reductive elimination are key steps in a wide variety of catalytic reactions mediated by transition-metal complexes. Historically, this reactivity has been considered to be the exclusive domain of d-block elements. However, this paradigm has changed in recent years with the demonstration of transition-metal-like reactivity by main-group compounds. This Review highlights the substantial progress achieved in the past decade for the activation of robust single bonds by main-group compounds and the more recently realized activation of multiple bonds by these elements. We also discuss the significant discovery of reversible activation of single bonds and distinct examples of reductive elimination at main-group element centers. The review consists of three major parts, starting with oxidative addition of single bonds, proceeding to cleavage of multiple bonds, and culminated by the discussion of reversible bond activation and reductive elimination. Within each subsection, the discussion is arranged according to the type of bond being cleaved or formed and considers elements from the left to the right of each period and down each group of the periodic table. The majority of results discussed in this Review come from the past decade; however, earlier reports are also included to ensure completeness.

Natural radioactivity level of main building materials in Baotou, China

International Nuclear Information System (INIS)

Zhao Caifeng; Lu Xinwei; Li Nan; Yang Guang

2012-01-01

A survey was done on natural radioactivity level and annual effective dose rate of main building materials in Baotou, China. The natural radionuclides of 40 K, 232 Th and 226 Ra in main building materials collected from Baotou were measured using NaI γ-ray spectrometry and the measured data were analyzed according to the national standards and radiological protection principles of the European Commission. The specific activities of 40 K, 232 Th and 226 Ra in the building materials samples were 218.82-1145.92, 19.75-1.32.50 and 11.46-82.66 Bq/kg, respectively. The internal and external exposure indexes of building materials were 0.06-0.41 and 0.28-0.70, respectively. The annual effective dose equivalent was 0.41-0.97 mSv/y. This justifies the production and sale of the main building materials, as both the internal and external exposure indexes of building materials are less than 1. The effective dose rate of ash brick is 0.97 mSv/y, while the maximum acceptable value is 1 mSv/y. Therefore, it is necessary to control the amount of industrial waste residue in building materials to avoid unnecessary radioactive exposure to residents. (authors)

Main injector synchronous timing system

International Nuclear Information System (INIS)

Blokland, W.; Steimel, J.

1998-01-01

The Synchronous Timing System is designed to provide sub-nanosecond timing to instrumentation during the acceleration of particles in the Main Injector. Increased energy of the beam particles leads to a small but significant increase in speed, reducing the time it takes to complete a full turn of the ring by 61 nanoseconds (or more than 3 rf buckets). In contrast, the reference signal, used to trigger instrumentation and transmitted over a cable, has a constant group delay. This difference leads to a phase slip during the ramp and prevents instrumentation such as dampers from properly operating without additional measures. The Synchronous Timing System corrects for this phase slip as well as signal propagation time changes due to temperature variations. A module at the LLRF system uses a 1.2 Gbit/s G-Link chip to transmit the rf clock and digital data (e.g. the current frequency) over a single mode fiber around the ring. Fiber optic couplers at service buildings split off part of this signal for a local module which reconstructs a synchronous beam reference signal. This paper describes the background, design and expected performance of the Synchronous Timing System. copyright 1998 American Institute of Physics

Main injector synchronous timing system

International Nuclear Information System (INIS)

Blokland, Willem; Steimel, James

1998-01-01

The Synchronous Timing System is designed to provide sub-nanosecond timing to instrumentation during the acceleration of particles in the Main Injector. Increased energy of the beam particles leads to a small but significant increase in speed, reducing the time it takes to complete a full turn of the ring by 61 nanoseconds (or more than 3 rf buckets). In contrast, the reference signal, used to trigger instrumentation and transmitted over a cable, has a constant group delay. This difference leads to a phase slip during the ramp and prevents instrumentation such as dampers from properly operating without additional measures. The Synchronous Timing System corrects for this phase slip as well as signal propagation time changes due to temperature variations. A module at the LLRF system uses a 1.2 Gbit/s G-Link chip to transmit the rf clock and digital data (e.g. the current frequency) over a single mode fiber around the ring. Fiber optic couplers at service buildings split off part of this signal for a local module which reconstructs a synchronous beam reference signal. This paper describes the background, design and expected performance of the Synchronous Timing System

Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Maine

Energy Technology Data Exchange (ETDEWEB)

Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-02-15

The 2015 IECC provides cost-effective savings for residential buildings in Maine. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Maine.

Main theorems of thermodynamics focused on future energy supply

Energy Technology Data Exchange (ETDEWEB)

Knizia, K

1983-09-01

Proceeding from the ethical aim to minimize sufferings, we have to develop rules of conduct which take into account the effects of our actions which in our complex world reach spatially as well as temporally further than in previous times. The basic laws of nature which govern our activities include the first and the second main theorems of thermodynamics. It is especially the second main theorem which also represent the creative principle of shaping and maintaining order and structures. In general, this is achieved by the use of the production factors: energy - information - matter. This also applies to the human creativity, including specific adjustment of these production factors related to man and his environment. It is only the correct use which can achieve an adequate supply of goods for a still growing world population, together with its peaceful and humane numerical stabilisation, satisfactory environment protection and careful consumption of raw material reserves.

Effect of main stream void distribution on cavitating hydrofoil

International Nuclear Information System (INIS)

Ito, J.

1993-01-01

For the safety analysis of a loss of coolant accident in a pressurized water reactor, it is important to establish an analytical method which predicts the pump performance under gas-liquid two-phase flow condition. J.H. Kim briefly reviewed several major two-phase flow pump models, and discussed the parameters that could significantly affect two-phase pump behavior. The parameter pointed out to be of the most importance is void distribution at the pump inlet. This says that the pipe bend near the pump inlet makes the void distribution at the pump inlet nonuniform, and this matter can have a significant effect on the impeller blade performance. This paper proposes an analytical method of solution for a partially cavitating hydrofoil placed in the main stream of incompressible homogeneous bubbly two-phase flow conditions whose void fraction is exponentially distributed normal to chordline. The paper clarifies the effect of main stream void distribution parameter on the partially cavitating hydrofoil characteristics

CERN's new Career Structure Main Changes in a Nutshell

CERN Multimedia

2001-01-01

All Staff Members will have received an official notification of their position in the new career path structure, with effect from 1 September 2001. A Weekly Bulletin announcement two weeks ago (Bulletin 33/2001) referred to documents and contacts for individual or general information, notably via the HR Division Web site (see below). The present article summarises the main changes between the MOAS and the MAPS (Merit Advancement and Promotion Scheme). The aim of MAPS is to make the career structure more dynamic, while retaining positive elements of the MOAS scheme, notably an annual interview and performance assessment process. The main changes are: - Career reviews including salary band promotion at several stages in a person's career replace the previous automatic grade-to-grade progression within a career path. - Speeds of advancement can be modulated to a greater extent. - The exceptional advancement zone is re-designed. - Premiums or allowances linked to performance, responsibility, and specific labou...

A coupled two-dimensional main chain torsional potential for protein dynamics: generation and implementation.

Science.gov (United States)

Li, Yongxiu; Gao, Ya; Zhang, Xuqiang; Wang, Xingyu; Mou, Lirong; Duan, Lili; He, Xiao; Mei, Ye; Zhang, John Z H

2013-09-01

Main chain torsions of alanine dipeptide are parameterized into coupled 2-dimensional Fourier expansions based on quantum mechanical (QM) calculations at M06 2X/aug-cc-pvtz//HF/6-31G** level. Solvation effect is considered by employing polarizable continuum model. Utilization of the M06 2X functional leads to precise potential energy surface that is comparable to or even better than MP2 level, but with much less computational demand. Parameterization of the 2D expansions is against the full main chain torsion space instead of just a few low energy conformations. This procedure is similar to that for the development of AMBER03 force field, except unique weighting factor was assigned to all the grid points. To avoid inconsistency between quantum mechanical calculations and molecular modeling, the model peptide is further optimized at molecular mechanics level with main chain dihedral angles fixed before the calculation of the conformational energy on molecular mechanical level at each grid point, during which generalized Born model is employed. Difference in solvation models at quantum mechanics and molecular mechanics levels makes this parameterization procedure less straightforward. All force field parameters other than main chain torsions are taken from existing AMBER force field. With this new main chain torsion terms, we have studied the main chain dihedral distributions of ALA dipeptide and pentapeptide in aqueous solution. The results demonstrate that 2D main chain torsion is effective in delineating the energy variation associated with rotations along main chain dihedrals. This work is an implication for the necessity of more accurate description of main chain torsions in the future development of ab initio force field and it also raises a challenge to the development of quantum mechanical methods, especially the quantum mechanical solvation models.

A new visible spectroscopy diagnostic for the JET ITER-like wall main chamber

OpenAIRE

Maggi, C. F.; Brezinsek, S.; Zastrow, K.-D.; JET-EFDA Contributors; Stamp, M. F.; Griph, S.; Heesterman, P.; Hogben, C.; Horton, A.; Meigs, A.; Morlock, C.; Studholme, W.

2012-01-01

In preparation for ITER, JET has been upgraded with a new ITER-like wall (ILW), whereby the main plasma facing components, previously of carbon, have been replaced by mainly Be in the main chamber and W in the divertor. As part of the many diagnostic enhancements, a new, survey, visible spectroscopy diagnostic has been installed for the characterization of the ILW. An array of eight lines-of-sight (LOS) view radially one of the two JET neutral beam shine through areas (W coated carbon fibre c...

Haemorrhage - the main presenting feature of diverticular disease of ...

African Journals Online (AJOL)

Haemqrrhage is one of the less common presentations of diverticular disease. This retrospective 5 year study of 23 patients has identified it as the main presentation (74%) among South African blacks in whom the disease is uncommon, but emerging as a clinical problem. Women constituted a statistically significant ...

Non-volatile main memory management methods based on a file system.

Science.gov (United States)

Oikawa, Shuichi

2014-01-01

There are upcoming non-volatile (NV) memory technologies that provide byte addressability and high performance. PCM, MRAM, and STT-RAM are such examples. Such NV memory can be used as storage because of its data persistency without power supply while it can be used as main memory because of its high performance that matches up with DRAM. There are a number of researches that investigated its uses for main memory and storage. They were, however, conducted independently. This paper presents the methods that enables the integration of the main memory and file system management for NV memory. Such integration makes NV memory simultaneously utilized as both main memory and storage. The presented methods use a file system as their basis for the NV memory management. We implemented the proposed methods in the Linux kernel, and performed the evaluation on the QEMU system emulator. The evaluation results show that 1) the proposed methods can perform comparably to the existing DRAM memory allocator and significantly better than the page swapping, 2) their performance is affected by the internal data structures of a file system, and 3) the data structures appropriate for traditional hard disk drives do not always work effectively for byte addressable NV memory. We also performed the evaluation of the effects caused by the longer access latency of NV memory by cycle-accurate full-system simulation. The results show that the effect on page allocation cost is limited if the increase of latency is moderate.

Research on reliability measures of the main transformer and GIS equipment manufacturing process

International Nuclear Information System (INIS)

Wu Honglong

2014-01-01

Based on the accidents of the main transformer GIS equipment and the accidents of the high voltage switch equipment, combined with the main transformer switch equipment maintenance experience and electrical theory, the reliability measures of the main transformer GIS equipment during manufacturing stage are studied and improved. Six successful reliability measures are identified: 1) design properly and check the ability of transformer for anti short circuit; 2) choose mature and reliable main transformer HV bushing; 3) choose GIS switch operation mechanism of high quality and reliability; 4) ensure that the insulation margin through tests piece by piece on withstand voltage and partial discharge of the GIS equipment insulation; 5) take test measures such as GIS conductor, shell polishing witness process and full form lightning impulse, to find out and eliminate the defects of abnormal electric field distribution; 6) Anti VFTO design for the main transformer connected with GIS with the voltage of 500 kV should be considered, and its anti VFTO ability to meet the safe operation under VFTO requirements should be checked. This paper proposed 2 new measures: 1) the main transformer insulation material quality standard is determined not only by its high dielectric strength, but more importantly by the homogeneous dielectric electric strength. Insulating Materials with a high and also uniform dielectric strength should be chosen. 2) During the silver-coating stage of the GIS equipment conductor, QC group activities should be organized to ensure that the plating layer quality, and the current lap surface DC resistance measurements should be supervised and witnessed to ensure the quality of the conductor contact surface. These measures are verified in Fuqing project of GIS main transformer equipment manufacturing process, and their effectiveness is proven. (author)

Specific perfusion pattern in stress 201Tl myocardial scintigraphy of left main coronary artery disease

International Nuclear Information System (INIS)

Wakasugi, Shigetoshi; Shibata, Nobuhiko; Kobayashi, Tohru; Fudemoto, Yoshiyuki; Hasegawa, Yoshihisa; Nakano, Shunichi

1986-01-01

The usefulness of stress 201 Tl myocardial scintigraphy for identifying left main coronary artery disease was evaluated with data from 23 patients with 50% or more narrowing of the left main coronary artery and 56 patients with 75% or more narrowing of the major coronary arteries but without left main coronary artery involvement (no left main coronary artery disease). Quantitative evaluation of stress perfusion scintigrams in all five patients with narrowing of the left main coronary artery of 90% or more showed a characteristic perfusion pattern (left main pattern) of extensive homogeneous defect over the whole anterolateral segment and simultaneous defects in all radii of the high anteroseptal and high posterolateral segments. On the other hand, such a perfusion pattern was noted in only 1 of 18 patients with less than 90% stenosis of the left main coronary artery and in only 1 of 56 patients with no left coronary artery disease. (orig.)

The main issues preventing Kosovo’s economic development

OpenAIRE

Demir Lima

2017-01-01

This study provides an analysis of several problematic factors preventing Kosovo’s economic development. Several sectors that could have been the main pillars of economic development, such as manufacturing, energy, mines and minerals, and other economic sectors have been neglected from the development by domestic institutions or were used clandestinely by certain interest groups, whose focus was not in the development of the country but rather their personal gain. Trade remained the preferred...

Main Ring bunch spreaders: Past, 1987/1988 fixed target run, and proposed future

International Nuclear Information System (INIS)

Jackson, G.P.

1989-01-01

During the last 1987--1988 fixed target running period beam intensity was limited many times by coherent instabilities in both the Main Ring and in the Tevatron. The intensity thresholds for instabilities are generally inversely proportional to the proton bunch length. Since fixed target operations are insensitive to the longitudinal phase space emittance of the beam, bunch spreaders are employed to increase this emittance, and hence the bunch length. As a result, more beam intensity can be delivered to the fixed target experiments. This paper starts with a short history behind the old Main Ring bunch spreader. After discussing the physics of stimulated emittance growth, the design and performance of the 1987--1988 fixed target run Main Ring bunch spreader is discussed. Finally, designs of improved Main Ring and Tevatron bunch spreaders for the next fixed target run are proposed. 23 figs

Lubrication analysis of the journal bearing in the main coolant pump of SMART

International Nuclear Information System (INIS)

Lee, J. S.; Park, J. S.; Kim, J. H.; Kim, J. I.; Jang, M. H.

2000-01-01

Special type journal bearings are installed in the main coolant pump for SMART to support the rotating shaft with proper lubrication. The canned motor type main coolant pumps are arranged vertically on the reactor vessel. The MCP bearings are lubricated with water without external lubricating oil supply. Long bearing with vertical grooves is designed with relatively large bearing clearance to accommodate the long shaft. Lubricational analysis method for journal bearing with vertical grooves in the main coolant pump of SMART is proposed, and lubricational characteristics of the bearings are examined in this paper

Exercise thallium-201 myocardial imaging in left main coronary artery disease: sensitive but not specific

International Nuclear Information System (INIS)

Rehn, T.; Griffith, L.S.; Achuff, S.C.; Bailey, I.K.; Bulkley, B.H.; Burow, R.; Pitt, B.; Becker, L.C.

1981-01-01

To determine the usefulness of thallium-201 scintigraphy for identifying left main coronary artery disease, the results of scintigraphy at rest and during exercise were compared in 24 patients with 50 percent or greater narrowing of the left main coronary artery and 80 patients with 50 percent or greater narrowing of one or more of the major coronary arteries but without left main coronary involvement. By segmental analysis of the scintigrams, perfusion defects were assigned to the left anterior descending, left circumflex or right coronary artery, singly or in combination, and the pattern of simultaneous left anterior descending and circumflex arterial defects was used to identify left main coronary artery disease. Of the 24 patients with left main coronary artery disease, 22 (92 percent) had abnormal exercise scintigrams. Despite this high sensitivity, the pattern of perfusion defects was not specific; the ''left main pattern'' was found in 3 patients (13 percent) with left main coronary artery disease but also in 3 (33 percent) of 9 patients with combined left anterior descending and left circumflex arterial disease, 4 (19 percent) of 21 patients with three vessel disease and 3 (6 percent) of 50 patients with one or two vessel disease but excluding the group with left anterior descending plus left circumflex arterial disease. The pattern of perfusion defects in the patients with left main coronary artery disease was determined by the location and severity of narrowings in the coronary arteries downstream from the left main arterial lesion. Concomitant lesions in other arteries were found in all patients with left main coronary disease (one vessel in 1 patient, two vessels in 7 patients and three vessels in 16). For this reason, it is unlikely that even with improvements in radiopharmaceutical agents and imaging techniques, myocardial perfusion scintigraphy will be sufficiently specific for definitive identification of left main coronary artery disease

Quantity and quality benefits of in-service invasive cleaning of trunk mains

Directory of Open Access Journals (Sweden)

I. Sunny

2017-07-01

Full Text Available Trunk mains are high risk critical infrastructure where poor performance can impact on large numbers of customers. Both quantity (e.g. hydraulic capacity and quality (e.g. discolouration of trunk main performance are affected by asset deterioration in the form of particle accumulation at the pipe wall. Trunk main cleaning techniques are therefore desirable to remove such material. However, little is quantified regarding the efficacy of different maintenance interventions or longer-term changes following such cleaning. This paper presents an assessment of quantity and quality performance of a trunk main system pre, post and for 12 months following cleaning using pigging with ice slurry. Hydraulic calibration showed a 7 times roughness height reduction after ice slurry pigging, evidencing substantially improved hydraulic capacity and reduced headloss. Turbidity response due to carefully imposed shear stress increase remained significant after the cleaning intervention, showing that relatively loose material had not been fully removed from the pipe wall. Overall the results demonstrate that cleaning by pigging with ice slurry can be beneficial for quantity performance, but care and further assessment may be necessary to realise the full quality benefits.

Quantity and quality benefits of in-service invasive cleaning of trunk mains

Science.gov (United States)

Sunny, Iftekhar; Husband, Stewart; Drake, Nick; Mckenzie, Kevan; Boxall, Joby

2017-07-01

Trunk mains are high risk critical infrastructure where poor performance can impact on large numbers of customers. Both quantity (e.g. hydraulic capacity) and quality (e.g. discolouration) of trunk main performance are affected by asset deterioration in the form of particle accumulation at the pipe wall. Trunk main cleaning techniques are therefore desirable to remove such material. However, little is quantified regarding the efficacy of different maintenance interventions or longer-term changes following such cleaning. This paper presents an assessment of quantity and quality performance of a trunk main system pre, post and for 12 months following cleaning using pigging with ice slurry. Hydraulic calibration showed a 7 times roughness height reduction after ice slurry pigging, evidencing substantially improved hydraulic capacity and reduced headloss. Turbidity response due to carefully imposed shear stress increase remained significant after the cleaning intervention, showing that relatively loose material had not been fully removed from the pipe wall. Overall the results demonstrate that cleaning by pigging with ice slurry can be beneficial for quantity performance, but care and further assessment may be necessary to realise the full quality benefits.

Richmond Main Colliery to become a showpiece once again

Energy Technology Data Exchange (ETDEWEB)

1982-09-01

Richmond Main Colliery in New South Wales was at one time the largest and most important deep mine in Australia. It was producing coal from 1914 to 1967 when it was closed down. Now the site has been acquired by the local council for restoration as an historic tourist site.

Antiproton acceleration in the Fermilab Main Ring and Tevatron

International Nuclear Information System (INIS)

Martin, P.; Dinkel, J.; Ducar, R.

1987-01-01

The operation of the Fermilab Main Ring and Tevatron rf systems for colliding beams physics is discussed. The changes in the rf feedback system required for acceleration of antiprotons, and the methods for achieving proper transfer of both protons and antiprotons are described. Data on acceleration and transfer efficiencies are presented

Digital Learning Compass: Distance Education State Almanac 2017. Maine

Science.gov (United States)

Seaman, Julia E.; Seaman, Jeff

2017-01-01

This brief report uses data collected under the U.S. Department of Education's National Center for Educational Statistics (NCES) Integrated Postsecondary Education Data System (IPEDS) Fall Enrollment survey to highlight distance education data in the state of Maine. The sample for this analysis is comprised of all active, degree-granting…

Motor-Generator powering the PS (Proton Synchrotron) main magnets

CERN Multimedia

1983-01-01

This motor-generator,30 MW peak, 1500 r.p.m.,pulsed power supply for the PS main magnet replaced in 1968 the initial 3000 r.p.m. motor-generator-flywheel set which had served from the PS start-up in 1959 until end 1967. See also photo 8302337 and its abstract.

Main and interaction effects of extrusion temperature and usage ...

African Journals Online (AJOL)

The extruded full fat soybean (EFFSB) may be used in diet to satisfy the energy and protein requirements of fast growing broiler chickens. The main and interaction effects of three extrusion temperatures and two dietary levels of FFSB were studied on the performance, physiological enzymes and blood metabolites of broiler ...

Identification of the main processes in new towns Development ...

African Journals Online (AJOL)

Identification of the main processes in new towns Development Company in Iran and provision of the model of ideal processes for optimal management of ... The most important result of this project is that after identifying the status quo, mapping the processes, revising the processes and applying revised processes, the ...

Isolated systems with wind power. Main report

DEFF Research Database (Denmark)

Lundsager, P.; Bindner, Henrik W.; Clausen, Niels-Erik

2001-01-01

The overall objective of this research project is to study the development of methods and guidelines rather than "universal solutions" for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present amore unified and generally applicable...... approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, fieldmeasurements in Egypt, development of an inventory of small isolated systems, overview of end...... for Isolated Systems with Wind Power, applicable for international organisations such as donoragencies and development banks....

Emotional and social perception of main caregiver in a rural health district

OpenAIRE

Fabiola Yonte Huete; María Belén Yonte Huete; Mª Teresa Meneses Jiménez

2012-01-01

Cross-sectional observational study of 50 caregivers of dependent patient immobilized. We analyzed the sociodemographic characteristics, type and characteristics of care, social, emotional and quality of life of main caregivers. Sociodemographic and care characteristics related to dependent patient immobilized was also studied. Objective: Describing the profile of dependent patient immobilized and their caregiver, and the emotional and social characteristics perceived by the main caregiver. R...

Long-term prognostic value of risk scores after drug-eluting stent implantation for unprotected left main coronary artery: A pooled analysis of the ISAR-LEFT-MAIN and ISAR-LEFT-MAIN 2 randomized clinical trials.

Science.gov (United States)

Xhepa, Erion; Tada, Tomohisa; Kufner, Sebastian; Ndrepepa, Gjin; Byrne, Robert A; Kreutzer, Johanna; Ibrahim, Tareq; Tiroch, Klaus; Valgimigli, Marco; Tölg, Ralf; Cassese, Salvatore; Fusaro, Massimiliano; Schunkert, Heribert; Laugwitz, Karl L; Mehilli, Julinda; Kastrati, Adnan

2017-01-01

To evaluate the long-term prognostic value of risk scores in the setting of drug-eluting stent (DES) implantation for uLMCA. Data on the prognostic value of novel risk scores developed to select the most appropriate revascularization strategy in patients undergoing DES implantation for uLMCA disease are relatively limited. The study represents a patient-level pooled analysis of the ISAR-LEFT-MAIN (607 patients randomized to paclitaxel-eluting or sirolimus-eluting stents) and the ISAR-LEFT-MAIN-2 (650 patients randomized to everolimus-eluting or zotarolimus-eluting stents) randomized trials. The Syntax Score (SxScore) as well the Syntax Score II (SS-II), the EuroSCORE and the Global Risk Classification (GRC) were calculated. The primary outcome was all-cause mortality. At a mean follow-up of 3 years there were 160 deaths (12.7%). The death-incidence was significantly higher in the upper tertiles than in the intermediate or lower ones for all risk scores (log-rank test P risk scores were able to stratify the mortality risk at long-term follow-up. EuroSCORE was the only risk score that significantly improved the discriminatory power of a multivariable model to predict long-term mortality. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Natural syntax : English interrogative main clauses

Directory of Open Access Journals (Sweden)

Janez Oresnik

2007-12-01

Full Text Available Natural Syntax is a developing deductive theory, a branch of Naturalness Theory. The naturalnessjudgements are couched in naturalness scales, whichfollow from the basic parameters (or «axioms» listed at the beginning of the paper. The predictions of the theory are calculated in deductions, whose chief components are apair of naturalness scales and the rules governing the alignment of corresponding naturalness values. Parallel and chiastic alignments are distinguished, in complementary distribution. Chiastic alignment is mandatory in deductions limited to unnatural environments. The paper deals with English interrogative main clauses. Within these, only the interrogatives containing wh-words exclusively insitu constitute an extremely unnatural environment and require chiastic alignment. Otherwiseparallel alignment is used. Earlier publications on Natural Syntax: Kavcic 2005a,b, Oresnik 1999, 2000a,b, 200la-f   2002, 2003a-c, 2002/03, 2004. This list cites only works written in English.

Service provision patterns by main diagnoses and characteristics of patients.

Science.gov (United States)

Brennan, D S; Spencer, A J; Szuster, F S

2000-06-01

Service provision patterns may be influenced not only by clinical oral health status leading to a diagnosis and treatment plan, but also by other variables such as patient characteristics. The main aim of this study was to investigate whether associations between services provided and patient factors would persist after controlling for the main presenting diagnosis or condition. A random sample of dentists surveyed in 1993-94 provided a response rate of 74%. Private general practitioners recorded service provision data from logs of 1-2 typical days of practice. Caries (26.5%) was the most prevalent diagnosis, followed by recall/maintenance care (19.0%), pulpal/periapical infection (10.9%), and failed restorations (10.4%). Diagnoses were associated with variation in the percentage of patients receiving services in main areas of service, and also with insurance status, sex and age distributions of patients, and type of visit (chi-square; Pservices indicated statistically significant associations with patient characteristics and diagnosis categories. Controlling for diagnosis, uninsured patients and those visiting for emergencies had less favourable service patterns (e.g., higher odds of extractions, but lower odds of preventive and crown and bridge services) compared to patients who had dental insurance or visited for check-ups or other non-emergency dental problems. The influence of these factors on services provided has implications of public health importance in terms of appropriateness of care and social inequality.

Effects of main traits of sweet sorghum irradiated by carbon ions

International Nuclear Information System (INIS)

Li Wenjian; He Jingyu; Liu Qingfang; Yu Lixia; Dong Xicun

2009-01-01

To investigate the influence of carbon ion irradiation on important agronomic characters of sweet sorghum, dry seeds of Sweet Sorghum BJ0601 and BJ0602 were irradiated by 100 MeV/u 12 C +6 ion beam to different doses at Heavy Ion Accelerator National Laboratory in Lanzhou (HIANLL). When matured, the main traits of sweet sorghum were measured. The correlation coefficient of five main agronomic characters, i.e. number of node, plant height, stalk diameter, sugar content and stem weight per plant, were analyzed using the SPSS 13.0 software. The results indicated that the obvious influence of sweet sorghum irradiated by carbon ion beam was observed. In addition, the correlation of main traits was studied. This study may provide rudimental data to select novel variety of sweet sorghum suited for fuel ethanol production. In addition, the average of sugar content of early mutant BJ0601-1 is higher than BJ0601 in M2, and the sugar content of sweet sorghum may be improved by carbon ion beam irradiation. (authors)

Main Street as Art Museum: Metaphor and Teaching Strategies

Science.gov (United States)

Vallance, Elizabeth

2007-01-01

A walk down Main Street can be very much like a stroll through a museum gallery--visually rich, inviting unexpected choices, aesthetically rewarding. This article explores the concept of shop windows as visually ordered compositions, much like paintings and other art objects, and suggests some approaches to applying this concept in teaching a…

Analysis of Dynamic Inertia Forces at Main Bearing of Ship Reciprocating Engines

Directory of Open Access Journals (Sweden)

F. Louhenapessy Louhenapessy,

2010-11-01

Full Text Available During operation, a ship reciprocating engine will vibrate due to the force resulting from the cycle movement of the dynamic components. Soon or later, the vibration will cause wear of engine components. Therefore, the cause of vibration should be early identified so that the propagation of wear can be anticipated. The study modeled the ship reciprocating engine as a two stroke engine, and analyzed one of the causes of the engine vibration, i.e. the force acting on main bearing, using a numerical simulation. An experimental study was also carried out for measuring the acceleration of vibration response due to the numerical dynamic inertia force. The results showed that the dynamic inertia force acting on the main bearing is the main cause of the vibration of engine.

On precise ZAMSs, the solar color, and pre-main-sequence lithium depletion

International Nuclear Information System (INIS)

Vandenberg, D.A.; Poll, H.E.

1989-01-01

This paper describes a semiempirical main-sequence-fitting method for the determination of distances to stellar systems, which uses a ZAMS locus carefully normalized to the sun, and whose shape is defined by a quartic over the color range for (B-V)0 values between 0.2 and 1.0 such that the morphology of the Pleiades C-M diagram is accurately reproduced. Using this technique, distances were derived for a number of star clusters. It was found that the observed depletion of lithium among cool main-sequence stars in the Hyades and Pleiades can be matched quite well by the present models. Calculations also show that the depletion of Li at a fixed T(eff) along the main sequence is a sensitive function of Fe/H. 98 refs

Understanding, modeling, and improving main-memory database performance

OpenAIRE

Manegold, S.

2002-01-01

textabstractDuring the last two decades, computer hardware has experienced remarkable developments. Especially CPU (clock-)speed has been following Moore's Law, i.e., doubling every 18 months; and there is no indication that this trend will change in the foreseeable future. Recent research has revealed that database performance, even with main-memory based systems, can hardly benefit from the ever increasing CPU power. The reason for this is that the performance of other hardware components h...

A PREDICTABLE MULTI-THREADED MAIN-MEMORY STORAGE MANAGER

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

This paper introduces the design and implementation of a predictable multi-threaded main-memo- ry storage manager (CS20), and emphasizes the database service mediator(DSM), an operation prediction model using exponential averaging. The memory manager, indexing, as well as lock manager in CS20 are also presented briefly. CS20 has been embedded in a mobile telecommunication service system. Practice showed, DSM effectively controls system load and hence improves the real-time characteristics of data accessing.

Korporatiivne maine loob väärtust / Charles J Fombrun

Index Scriptorium Estoniae

Fombrun, Charles J

2002-01-01

Autor põhjendab, miks heal mainel on majanduslik väärtus, toob välja 6 kategooriat tunnuseid, mis iseloomustavad inimestele meeldivaid ja ebameeldivaid firmasid ning 5 meetodit ettevõtte maine kujundamiseks

Regional Ocean Modeling System (ROMS): Main Hawaiian Islands: Data Assimilating

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the main Hawaiian islands at approximately 4-km...

Maine and Massachusetts 2015 QL1 and QL2 Lidar

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Geographic Extent: Central Maine, covering approximately 2,882 total square miles at QL 2. Western Massachusetts, covering approximately 815 total square miles at QL...

Development and validation process of the advanced main control board for next Japanese PWR plants

International Nuclear Information System (INIS)

Tani, M.; Ito, K.; Yokoyama, M.; Imase, M.; Okamoto, H.

2000-01-01

The purpose of main control room improvement is to reduce operator workload and potential human errors by offering a better working environment where operators can maximize their abilities. Japanese pressurized water reactor (PWR) utilities and Mitsubishi group have developed a touch -screen-based main control console (i.e. advanced main control room) the next generation PWRs to further improve the plant operability using a state of the art electronics technology. The advanced main control room consists of an operator console, a supervisor console and large display panels. The functional specifications were evaluated by utility operators using a prototype main control console connected to a plant simulator. (author)

ECOLOGICAL CONSCIOUSNESS AS ONE OF THE MAIN PRINCIPLES OF ECOLOGICAL POLICY

Directory of Open Access Journals (Sweden)

Diana O. Dushkova

2017-09-01

Full Text Available The article presents the concept of ecological consciousness and analyzes main features of its development and implementation in the environmental policy in European practice on the example of Germany. The study of German experience is conditioned by the fact that among the other developed countries of the world Germany is the leading country in its active work carried out at all levels of the environmental policy. It is shown that actions aimed at the development of ecological culture and environmental education of the civil society in Germany are of the same priority as the use of renewable energy, development of green technologies, etc. The article provides an overview of the most important publications devoted to the phenomenon of ecological consciousness and highlights different approaches to this definition. Based on the German experience, it defines the prerequisites, main roots and sources of ecological consciousness creation and the ways in which it can be involved in the regional programs on sustainable development and ecological policy. It analyzes the main practical approaches to the implementation of the principles of ecological consciousness in Germany as well as the role of environmental organizations in the realization of environmentally oriented activities. Therefore, it presents the main results of socio-ecological surveys conducted in Germany and Russia and gives their comparative analysis. It indicates possible ways to transfer the German experience in the Russian context to improve the ecological awareness of the Russian society and to arise its ecological activity in addressing environmental issues.

The vertical alignment of the D0 overpass in the Fermilab Main Ring

International Nuclear Information System (INIS)

Moore, C.D.

1989-03-01

The DO overpass was recently reconfigured in order to reduce the vertical dispersion in the Main Ring. The relationship between the global arrangement of the Main Ring Quadrupoles and the placement of the quads in the overpass is described. 4 refs., 6 figs., 1 tab

Research in auditing: main themes

Directory of Open Access Journals (Sweden)

Marcelo Porte

Full Text Available ABSTRACT The passage of the Sarbanes-Oxley Act (SOX was a turning point in auditing and in auditors practice for the academic world. Research concerning the characterization of academic production related to auditing is in its third decade. Its analysis is accomplished by means of definition of keywords, abstracts or title, and information on thematic association within the academic production itself in auditing is undisclosed. In order to revise this gap in auditing literature, this study identified the main themes in auditing and their association in post-SOX era by analyzing the content of objectives and hypothesis of 1,650 publications in Web of Science (2002-2014. The findings in this study extended those from the study by Lesage and Wechtler (2012 from 16 auditing thematic typologies to 22. The results demonstrate that the themes audit report & financial statement users, corporate governance, audit market, external audit, socio-economic data of the company, international regulation, and fraud risk & audit risk were the most addressed in the publications about auditing. Corporate governance has a broader association with the other themes in the area. Future researches may use these themes and relate them to the methodologies applied to audit studies.

Tracing early stellar evolution with asteroseismology: pre-main sequence stars in NGC 2264

Directory of Open Access Journals (Sweden)

Zwintz Konstanze

2015-01-01

Full Text Available Asteroseismology has been proven to be a successful tool to unravel details of the internal structure for different types of stars in various stages of their main sequence and post-main sequence evolution. Recently, we found a relation between the detected pulsation properties in a sample of 34 pre-main sequence (pre-MS δ Scuti stars and the relative phase in their pre-MS evolution. With this we are able to demonstrate that asteroseismology is similarly powerful if applied to stars in the earliest stages of evolution before the onset of hydrogen core burning.

On the secrecy capacity of the wiretap channel with imperfect main channel estimation

KAUST Repository

Rezki, Zouheir

2014-10-01

We study the secrecy capacity of fast fading channels under imperfect main channel (between the transmitter and the legitimate receiver) estimation at the transmitter. Lower and upper bounds on the ergodic secrecy capacity are derived for a class of independent identically distributed (i.i.d.) fading channels. The achievable rate follows from a standard wiretap code in which a simple on-off power control is employed along with a Gaussian input. The upper bound is obtained using an appropriate correlation scheme of the main and eavesdropper channels and is the best known upper bound so far. The upper and lower bounds coincide with recently derived ones in case of perfect main CSI. Furthermore, the upper bound is tight in case of no main CSI, where the secrecy capacity is equal to zero. Asymptotic analysis at high and low signal-to-noise ratio (SNR) is also given. At high SNR, we show that the capacity is bounded by providing upper and lower bounds that depend on the channel estimation error. At low SNR, however, we prove that the secrecy capacity is asymptotically equal to the capacity of the main channel as if there were no secrecy constraint. Numerical results are provided for i.i.d. Rayleigh fading channels.

Approach to the E-ELT dome and main structure challenges

Science.gov (United States)

Bilbao, Armando; Murga, Gaizka; Gómez, Celia; Llarena, Javier

2014-07-01

The E-ELT as a whole could be classified as an extremely challenging project. More precisely, it should be defined as an array of many different sub-challenges, which comprise technical, logistical and managerial matters. This paper reviews some of these critical challenges, in particular those related to the Dome and the Main Structure, suggesting ways to face them in the most pragmatic way possible. Technical challenges for the Dome and the Main Structure are mainly related to the need to upscale current design standards to an order of magnitude larger design. Trying a direct design escalation is not feasible; it would not work. A design effort is needed to cross hybridize current design standards with technologies coming from other different applications. Innovative design is therefore not a wish but a must. And innovative design comes along with design risk. Design risk needs to be tackled from two angles: on the one hand through thorough design validation analysis and on the other hand through extensive pre-assembly and testing. And, once again, full scale integrated pre-assembly and testing of extremely large subsystems is not always possible. Therefore, defining a comprehensive test plan for critical components, critical subsystems and critical subassemblies becomes essential. Logistical challenges are linked to the erection site. Cerro Armazones is a remote site and this needs to be considered when evaluating transport and erection requirements. But it is not only the remoteness of the site that needs to be considered. The size of both Dome and Main Structure require large construction cranes and a well defined erection plan taking into account pre-assembly strategies, limited plan area utilization, erection sequence, erection stability during intermediate stages and, very specifically, efficient coordination between the Dome and the Main Structure erection processes. Managerial issues pose another set of challenges in this project. Both the size of the

Fermilab main accelerator quadrupole transistorized regulators for improved tune stability

International Nuclear Information System (INIS)

Yarema, R.J.; Pfeffer, H.

1977-01-01

During early operation of the Fermilab Main Accelerator, tune fluctuations, caused by the SCR-controlled power supplies in the quad bus, limited the beam aperature at low energies. To correct this problem, two transistorized power supplies were built in 1975 to regulate and filter the main ring quad magnet current during injection and beam acceleration through the rf transistion region. There is one power supply in series with each quad bus. Each supply uses 320 parallel power transistors and is rated at 300A, 120V. Since the voltage and current capabilities of the transistorized supplies are limited, the supplies are turned-off at about 25GeV. A real-time computer system initiates turn-on of the SCR-controlled power supplies and regulation takeover by the SCR-controlled supplies, at the appropriate times

Reconciling mass functions with the star-forming main sequence via mergers

Science.gov (United States)

Steinhardt, Charles L.; Yurk, Dominic; Capak, Peter

2017-06-01

We combine star formation along the 'main sequence', quiescence and clustering and merging to produce an empirical model for the evolution of individual galaxies. Main-sequence star formation alone would significantly steepen the stellar mass function towards low redshift, in sharp conflict with observation. However, a combination of star formation and merging produces a consistent result for correct choice of the merger rate function. As a result, we are motivated to propose a model in which hierarchical merging is disconnected from environmentally independent star formation. This model can be tested via correlation functions and would produce new constraints on clustering and merging.

Lubrication of Space Shuttle Main Engine Turbopump Bearings

Science.gov (United States)

Gibson, Howard; Munafo, Paul (Technical Monitor)

2001-01-01

The Space Shuttle has three main engines that are used for propulsion into orbit. These engines are fed propellants by four turbopumps on each engine. A main element in the turbopump is the bearings supporting the rotor that spins the turbine blades and the pump impeller. These bearings are required to spin at very high speeds, support radial and thrust loads, and have high wear resistance without the benefit of lubrication. The liquid hydrogen and oxygen propellants flow through the bearings to cool the surfaces. The volatile nature of the propellants excludes any conventional means of lubrication. Lubrication for these bearings is provided by the ball separator inside the bearing. The separator is a composite material that supplies a transfer film of lubrication to the rings and balls. New separator materials and lubrication schemes have been investigated at Marshall Space Flight Center in a bearing test rig with promising results. Hybrid bearings with silicon nitride balls have also been evaluated. The use of hybrid, silicon nitride ball bearings in conjunction -with better separator materials has shown excellent results. The work that Marshall has done is being utilized in turbopumps flying on the space shuttle fleet and will be utilized in future space travel. This result of this work is valuable for all aerospace and commercial applications where high-speed bearings are used.

The main issues preventing Kosovo’s economic development

Directory of Open Access Journals (Sweden)

Demir Lima

2017-11-01

Full Text Available This study provides an analysis of several problematic factors preventing Kosovo’s economic development. Several sectors that could have been the main pillars of economic development, such as manufacturing, energy, mines and minerals, and other economic sectors have been neglected from the development by domestic institutions or were used clandestinely by certain interest groups, whose focus was not in the development of the country but rather their personal gain. Trade remained the preferred activity throughout these years, which cannot be considered a beneficial sector for economic development, as much as manufacturing, which remains to date as Kosovo’s most underdeveloped sector. As long as Kosovo’s exports cover only 12% of total imports, no economic growth can be expected. Kosovo’s failure to attract strategic investors in years, which could open new jobs, has also contributed its lack of sufficient economic development. Thus, the most concerning issue during this period is the decline in foreign direct investments, which were expected to increase after the declaration of independence. In the lack of a long-term development strategy for certain sectors or priority activities, such as mines, energy, industry etc., there is no progress in the country's economic development. The main issue is that we should only favor those activities or identify segments where we have competitive advantages compared to other countries.

Myoepithelial cells are the main component in pleomorphic adenomas?

Science.gov (United States)

Ponce Bravo, Santa; Ledesma Montes, Constantino; López Becerril, Uriel; Morales Sánchez, Israel

2007-03-01

The aim of this study was to quantify by immunohistochemistry the number of myoepithelial cells (MyECs) in pleomorphic adenomas (PAs). We retrieved the paraffin cubes of 27 PAs, new slides were done and they were stained with anti-S100 protein antibody. The amount of S-100 protein positive cells was quantified, their morphology was recorded and comparison among MyEC number with age, gender and involved gland were also done. With S-100 protein, MyECs in normal salivary gland tissue were seen surrounding the ductual structures only. In the analysed PAs a mean of 27.4% of the neoplastic cells were positive to the antibody. With the exception of one PA, in all the analysed cases the plasmacytoid cells were the most commonly identified cells (48,6%). Results of this study suggest that MyECs do not constitute the main cellular component of the neoplastic compartment in PAs and corroborate the previously reported evidence by different authors, who studying the PAs suggested that MyECs does not comprise the main cellular neoplastic component of these entities.

The main provisions of the Lithuanian National Energy Strategy

International Nuclear Information System (INIS)

Miskinis, V.; Galinis, A.

2006-01-01

The aim of this paper is to set out findings from analysis of the Lithuanian economy and energy sector development and to discuss the main provisions of the draft of the updated National Energy Strategy. The paper presents a short description of tendencies in the Lithuanian economy and energy sector during transition to a free market economy. A significant reduction of final and primary energy intensity in Lithuania is confirmed by analysis based on data published in the recent national and international publications. Positive changes in the energy sector, favourable for implementation of market economy, are discussed. The methodology applied for analysis of the energy sector development and for preparation of the National Energy Strategy is presented. Strategic objectives of the Lithuanian energy sector, the measures to provide for a higher energy security and guidelines for the energy sector development are presented as well. The main provisions in the draft of the updated National Energy Strategy are established taking into consideration the obligations of Lithuania presented in the Treaty of Accession to the EU, the EU directives and other international documents. (author)

Chromaticity correction in the TRISTAN phase I main ring with two types of insertion

International Nuclear Information System (INIS)

Wu, Yingzhi; Egawa, Kazumi.

1984-07-01

The TRISTAN main ring now under construction has four insertions. Besides the normal modes in which the four insertions have the same optics, the TRISTAN main ring will be operated in somewhat more complicated configurations with insertions having different optics. This report will consider chromaticity corrections using six families of sextupoles for the TRISTAN main ring with two different insertion types; opposite insertions have the same optics. The strength of correcting sextupoles is determined mainly using the W-correction method. The program PATRICIA is used to track the trajectories of test particles over 800 turns. The results show that the correction scheme adopted allows adequately large amplitudes of betatron and synchrotron oscillations. (author)

Shared responsibility for managing electronic waste: A case study of Maine, USA

International Nuclear Information System (INIS)

Wagner, Travis P.

2009-01-01

Based on high disposal and low recycling rates of electronic waste (e-waste) and continued exportation to developing countries, reliance on municipal responsibility for e-waste management has been unsuccessful in the United States. This case study examines Maine's program, which was the first US state to mandate producer responsibility for recycling household e-waste. Maine's program established a shared cost responsibility among producers, municipalities, and consumers. The study found that Maine's program resulted in a significant reduction in disposal and a corresponding increase in environmentally sound recycling. In the first 3 years of the program, 6.406 million kg of household e-waste was collected and recycled for a population of 1.32 million. The new program, implemented in 2006, increased the number of e-waste items collected and recycled by 108% in the first year, 170% in the second year, and 221% in the third year. The program decreased direct economic costs to municipalities and households because of the shared cost approach and for the first time established costs for producers. There was no empirical evidence indicating that producers have or will improve the recyclability of electronic products to reduce recycling costs. While other weaknesses were that found potentially limit the adoption of Maine's program, its positive aspects warrant consideration by other governments.

Ordinary Social Interaction and the Main Effect Between Perceived Support and Affect.

Science.gov (United States)

Lakey, Brian; Vander Molen, Randy J; Fles, Elizabeth; Andrews, Justin

2016-10-01

Relational regulation theory hypothesizes that (a) the main effect between perceived support and mental health primarily reflects ordinary social interaction rather than conversations about stress and how to cope with it, and (b) the extent to which a provider regulates a recipient's mental health primarily reflects the recipient's personal taste (i.e., is relational), rather than the provider's objective supportiveness. In three round-robin studies, participants rated each other on supportiveness and the quality of ordinary social interaction, as well as their own affect when interacting with each other. Samples included marines about to deploy to Afghanistan (N = 100; 150 dyads), students sharing apartments (N = 64; 96 dyads), and strangers (N = 48; 72 dyads). Perceived support and ordinary social interaction were primarily relational, and most of perceived support's main effect on positive affect was redundant with ordinary social interaction. The main effect between perceived support and affect emerged among strangers after brief text conversations, and these links were partially verified by independent observers. Findings for negative affect were less consistent with theory. Ordinary social interaction appears to be able to explain much of the main effect between perceived support and positive affect. © 2015 Wiley Periodicals, Inc.

Emotional and social perception of main caregiver in a rural health district

Directory of Open Access Journals (Sweden)

Fabiola Yonte Huete

2012-03-01

Full Text Available Cross-sectional observational study of 50 caregivers of dependent patient immobilized. We analyzed the sociodemographic characteristics, type and characteristics of care, social, emotional and quality of life of main caregivers. Sociodemographic and care characteristics related to dependent patient immobilized was also studied. Objective: Describing the profile of dependent patient immobilized and their caregiver, and the emotional and social characteristics perceived by the main caregiver. Results: The age of dependent patient immobilized is rising particulary in women, with mental deterioration and dementia as principal diseases. The most of main caregivers are women, married women and daughters of dependent patient immobilized patients, with primary studies, in the middle age. They work almost the complete day in patient care, having less than two hour for themselves. The lack of money is the principal need felt it. The most of caregivers suffer mild to moderate stress and higher anxiety levels than general population, especially in females. Caregiver perceived quality of life is lower than general population too. Conclusions: To know the profile of dependent patient immobilized patient´s caregiver and the factors perceived burden caregiver´s, it is important developing interventions and plans to improve their quality of life related to health in order to reduce the syndrome of main caregiver.

Relation of chromospheric activity to convection, rotation, and pre-main-sequence evolution

International Nuclear Information System (INIS)

Gilliland, R.L.

1986-01-01

Pre-main-sequence, or T Tauri, stars are characterized by much larger fluxes of nonradiative origin than their main-sequence counterparts. As a class, the T Tauri stars have only moderate rotation rates, making an explanation of their chromospheric properties based on rapid rotation problematic. The recent success of correlating nonradiative fluxes to the Rossby number, Ro = P/sub rot//tau/sub conv/, a central parameter of simple dynamo theories of magnetic field generation, has led to the suggestion that the same relation might be of use in explaining the pre-main-sequence (PMS) stars if tau/sub conv/ is very large. We show that tau/sub conv/ does depend strongly on evolutionary effects above the main sequence (MS), but that this dependence alone cannot account for the high observed nonradiative fluxes. The acoustic flux is also strongly dependent on PMS evolutionary state, and when coupled to the parameterization of magnetic activity based on Ro, these two mechanisms seem capable of explaining the high observed level of chromospheric activity in T Tauri stars. The moment of inertia decreases by two to three order of magnitude during PMS evolution. Since young MS stars do not rotate two to three orders of magnitude faster than PMS stars, rapid loss or redistribution of angular momentum must occur

Study on the green total factor productivity in main cities of China

Directory of Open Access Journals (Sweden)

Zhang Jiansheng

2016-06-01

Full Text Available The aim of this research is to investigate China’s urban green total factor productivity (TFP under the background of progressing urbanization and intensifying environmental pollution, and found out its main influencing factors. In this paper, green TFP of 285 prefecture-level cities in China from 2005 to 2012 was estimated through Malmquist productivity index. Results showed that the annual growth of green TFP in main cities in China is 3.5% and the overall growth declines gradually. Viewed from decomposition of green TFP, technical progress is the main contributor of green TFP growth. Furthermore, the northern coastal region has achieved the highest annual growth of green TFP (4.5% and the northwest region achieved the lowest growth of green TFP (1.24%, indicating the great regional differences of green TFP and economic growth quality in China. According to analysis on influencing factors of green TFP in main cities, it has been concluded that per-capita urban road area, number of Internet users, proportion of fiscal expenditures, environmental regulation level and technical input are significantly positively correlated with green TFP, while industrial structure and foreign direct investment (FDI are significantly negatively correlated. Finally, policy suggestions to improve urban green TFP in China were proposed.

Photometric monitoring of pre-main sequence stars - 2

International Nuclear Information System (INIS)

Evans, A.; Davies, J.K.; Kilkenny, D.; Bode, M.F.

1989-01-01

A discussion is presented of the infrared and optical photometric variability of the pre-main sequence stars BF Ori and UX Ori. In the former case, the reddening that occurs during decline, at both optical and infrared wavelengths, is consistent with variable extinction by circumstellar grains having an interstellar-like reddening law. While in the case of UX Ori, the data suggest variability due to starspots. In both cases, a study of the polarimetric variability would be valuable to confirm these conclusions. (author)

Progress on a prototype main ring rf cavity

International Nuclear Information System (INIS)

Swain, G.; Kandarian, R.; Thiessen, H.A.; Poirier, R.; Smythe, W.R.

1989-01-01

A prototype rf cavity and rf drive system for a hadron facility main ring has been designed and will be tested in the Proton Storage Ring (PSR) at Los Alamos as a part of a collaborative effort between LANL and TRIUMF. The cavity uses an orthogonally biased ferrite tuner. The design provides for accelerating gap voltages up to 200 kV for the 49.3 to 50.8 MHz range. Progress on the cavity construction and testing is described. 13 refs., 5 figs

Rehabilitation of fire-damaged forest lands in southwestern Maine

Science.gov (United States)

A. D. Nutting; James C. Rettie; Wayne G. Banks

1949-01-01

Recognizing that it can ill afford the loss of timber productivity on the large acreage of forest land burned over by the 1947 fires, the state of Maine requested assistance of the Northeastern Forest Experiment Station of the United States Forest Service in a program of research that would aid in the rehabilitation of the burned-over forest land.

The main aspects of methodology of quality management system

Directory of Open Access Journals (Sweden)

Smirnova E.K.

2017-03-01

Full Text Available this article describes the formation and development of quality management as an integrated system. The author considers the theory and methodology of quality management since the early XXth century to the present day and describes the main problems encountered in the process of quality management system, as well as the ways to overcome them.

Water budget formulation for Ahmadu Bello University, main campus ...

African Journals Online (AJOL)

This study provides a water resources management option through formulation of water budget for the main campus of the Ahmadu Bello University, Zaria using secondary data obtained from various sources. The data revealed that, water consumption in the campus in the year 2005 was 3,101 m3/d and 3,125 m3/d in year ...

77 FR 68151 - Agency Information Collection Activities; Submission for OMB Review; Comment Request: Main Fan...

Science.gov (United States)

2012-11-15

... for OMB Review; Comment Request: Main Fan Operation and Inspection (I-A, II-A, III, and V-A Mines... Administration (MSHA) sponsored information collection request (ICR) titled, ``Main Fan Operation and Inspection...: Potentially gassy (explosive) conditions underground are largely controlled by main fans. When accumulations...

BANKING ETHICS: MAIN CONCEPTIONS AND PROBLEMS

Directory of Open Access Journals (Sweden)

VALENTINA FETINIUC

2014-10-01

Full Text Available Banking ethics is a specialized set of ethical standards and rules that should be followed in the activities of financial institutions and employees of the banking sector. But despite the simplicity of the definition, in the modern world, this concept becomes complex and ambiguous. The importance of studying this subject is defined by the fact that the ethical behavior of the bank and bank employees promotes banking. At present there are several conceptions of banking ethics: general ethics, regulated ethics and ethical bank. The most common practice is to regulate internal and external relations of banks and bank workers with ethical codes. At the same time, studies show the existence of problems in the banking standards of ethics, which negatively affects the financial institution. This article is intended to reflect main tendencies and problems of banking ethics at international level and experience of Republic of Moldova in this field.

VAT EVASION INLEBANON: CASES AND MAIN CAUSES

Directory of Open Access Journals (Sweden)

Rana Ismail

2012-07-01

Full Text Available The Value Added Tax (VAT is a very important source oftreasuryrevenuesinLebanon. It was initially introduced inLebanon in order to reduce the budgetdeficit and help contain the debt. However, VAT evasion growth inLebanon isleading to significant VAT revenue losses because of its size and frequency.In this paper, we will highlight the contribution of VAT to the treasury revenue. Inaddition, our research has led to figure out the most significant VAT evasion casesand the way tax payers evade paying their required VAT or try to have an illegalrefund. From these tax evasion cases, we will pinpoint the main causes of suchevasions and propose solutions to limit as much as possible VAT evasion inLebanon.

Comparison of effectiveness of advertising expenses during broadcasts of main hockey events

OpenAIRE

Kozlová, Natálie

2017-01-01

Title: Comparison of effectiveness of advertising expenses during broadcasts of main hockey events Objectives: The main goal of this dissertation is to compare the amount of money invested into the commercial advertisement during sport broadcasts at the ČT sport channel with viewer ratings. The used metric is a coefficient computed as a ratio between the viewer rating of the particular broadcast and the corresponding advertisement cost, normalized using Cost per Thousand method. Another goal ...

Ocean observing systems support operational forecasts for the timing of Maine's lobster fishery

Science.gov (United States)

Mills, K.; Hernandez, C.; Pershing, A. J.

2016-02-01

American lobster supports one of the most valuable fisheries in the United States, with a landed value in 2013 exceeding $460M. Although US lobstermen are free to fish throughout the year, the New England climate, lobster biology and fleet dynamics lead to a strong annual cycle with catch rates rising rapidly in early summer and landings peaking in late summer. When this annual cycle is disrupted, it can impact the supply and ultimately the price of lobsters. During the record warm conditions in 2012, the rise in catch rates occurred three weeks ahead of normal. Combined with higher than normal landings from the spring Canadian fishery, the early and high volume landings in 2012 led to a collapse in price that severely stressed the U. S. fishery, especially in Maine where over 85% of the landings occur. Based on this experience, we have been developing seasonal forecasts of the phenology of Maine lobster landings. Using temperatures at 50m from four NERACOOS buoys in the Gulf of Maine, we can reliably forecast the date when the Maine lobster fishery will `turn on' for the year, with prediction accuracy peaking in April. The high-landings period normally starts in July, and the 2-3 month lead-time provides some advance warning to dealers and processors of when their capacity needs to be ready and to fishermen of potential supply chain and market impacts such as we observed in 2012. We are currently working towards finer-scale regional forecasts along the Maine coast that may include other features that will provide information to help the lobster industry adapt to the rapid changes that are underway in the Gulf of Maine.

Relative Abundance of Adult Mosquitoes in University of Abuja Main ...

African Journals Online (AJOL)

Relative Abundance of Adult Mosquitoes in University of Abuja Main ... relative abundance of adult mosquitoes in four selected sites in University of Abuja ... These results indicated that vectors of mosquito-borne diseases are breeding in the ...

The corrosion mechanism of the sintered (Ce, Nd)-Fe-B magnets prepared by double main phase and single main phase approaches

Science.gov (United States)

Shi, Xiaoning; Zhu, Minggang; Zhou, Dong; Song, Liwei; Guo, Zhaohui; Li, Jia; Li, Wei

2018-05-01

The sintered (Ce, Nd)-Fe-B magnets were produced widely by Double Main Phase (DMP) method in China as the magnetic properties of the DMP magnets are superior to those of single main phase (SMP) magnets with the same nominal composition. In this work, the microstructure and corrosion mechanism of the sintered (Ce0.2Nd0.8)30FebalB (wt.%) magnets prepared by DMP and SMP method were studied in detail. Compared to SMP magnets, the DMP magnets have more positive corrosion potential, lower corrosion current density, larger electron transfer resistance, and lower mass loss of the free corrosion experiment in 0.5mol/l Na2SO4 aqueous solution. All of the results show that the DMP magnets have better corrosion resistance than SMP magnets. The back scattered electron images show that the crystalline grains of the DMP magnets are sphericity with a smooth surface while the SMP ones have plenty of edges and corners. Besides, the distribution of Ce/Nd is much more uneven in both magnetic phase and rare earth (Re)-rich phase of the DMP magnets than those of SMP magnets. After corrosion, DMP magnets show eroded magnetic phase and intact Re-rich phase, which indicate that galvanic corrosion of the Re-rich phase acting as the cathode appears.

Development of LBB Piping Evaluation Diagram for APR 1000 Main Steam Line Piping

International Nuclear Information System (INIS)

Yang, J. S.; Jeong, I. L.; Park, C. Y.; Bai, S. Y.

2010-01-01

This paper presents the piping evaluation diagram (PED) to assess the applicability of Leak-Before- Break(LBB) for APR 1000 main steam line piping. LBB-PED of APR 1000 main steam line piping is independent of its piping geometry and has a function of the loads applied in piping system. Also, in order to evaluate LBB applicability during construction process with only the comparative evaluation of material properties between actually used and expected, the expected changes of material properties are considered in the LBB-PED. The LBB-PED, therefore, can be used for quick LBB evaluation of APR 1000 main steam line piping of both design and construction

America Saves! Energizing Main Street's Small Businesses

Energy Technology Data Exchange (ETDEWEB)

Lindberg, James [National Trust for Historic Preservation, Washington, DC (United States)

2016-09-30

The America Saves! Energizing Main Street Small Businesses project engaged the 1,200-member National Main Street Center (NMSC) network of downtown organizations and other local, regional, and national partners to test a methodology for sharing customized energy efficiency information with owners of commercial buildings smaller than 50,000 square feet. Led by the National Trust for Historic Preservation’s Preservation Green Lab, the project marshalled local staff and volunteers to gather voluntarily-disclosed energy use information from participating businesses. This information was analyzed using a remote auditing tool (validated by the National Renewable Energy Lab) to assess energy savings opportunities and design retrofit strategies targeting seven building types (food service and sales, attached mixed-use, strip mall, retail, office, lodging, and schools). The original project design contemplated extensive leveraging of the Green Button protocol for sharing annualized utility data at a district scale. Due the lack of adoption of Green Button, the project partners developed customized approaches to data collection in each of twelve pilot communities. The project team encountered considerable challenges in gathering standardized annual utility data from local partners. After overcoming these issues, the data was uploaded to a data storehouse. Over 450 properties were benchmarked and the remote auditing tool was tested using full building profiles and utility records for more than 100 commercial properties in three of the pilot communities. The audit tool demonstrated potential for quickly capturing, analyzing, and communicating energy efficiency opportunities in small commercial buildings. However, the project team found that the unique physical characteristics and use patterns (partial vacancy, periodic intensive uses) of small commercial buildings required more trouble-shooting and data correction than was anticipated. In addition, the project revealed that

The Main Drivers of Environmentally Responsible Behaviour in Lithuanian Households

Directory of Open Access Journals (Sweden)

Dalia Streimikiene

2015-08-01

Full Text Available Preserving environmental and natural resources is one of the most important challenges for ensuring the sustainability of well-being over time. One can notice that measuring of environmental indicators related to environmentally responsible behaviour is complicated and demanding task. It is also important to define the main drivers of environmentally responsible development. The objective of this paper is to provide comparatives analysis of indicators of environmentally responsible behaviour in the Baltic States by comparing and assessing them in terms of the EU-28 average and to present the main drivers of environmentally responsible behaviour in Lithuania. Environmentally responsible behaviour is related to resource and energy savings, use of renewable energy sources, waste sorting and recycling, wastewater disposal etc. Comparative assessment of environmentally responsible behaviour indicators in the Baltic States indicated that all these indicators are bellow the EU-average, except the use of renewable energy sources. The main drivers of consumption behaviour in Lithuania were assessed by applying households surveys in order to define the major issues of concern and to develop relevant policies targeting these issues. Age, gender, education, and income of Lithuanian residents do not have impact on environmentally responsible behaviour in Lithuanian households (energy saving, buying energy efficient electric appliances, willingness to pay electricity from renewable energy sources use of biofuels. Only environmental awareness has impact on energy saving behaviour at home and use of biofuels in cars and waste recycle.

What are the main running-related musculoskeletal injuries? A Systematic Review.

Science.gov (United States)

Lopes, Alexandre Dias; Hespanhol Júnior, Luiz Carlos; Yeung, Simon S; Costa, Leonardo Oliveira Pena

2012-10-01

Musculoskeletal injuries occur frequently in runners and despite many studies about running injuries conducted over the past decades it is not clear in the literature what are the main running-related musculoskeletal injuries (RRMIs). The aim of this study is to systematically review studies on the incidence and prevalence of the main specific RRMIs. An electronic database search was conducted using EMBASE (1947 to October 2011), MEDLINE (1966 to October 2011), SPORTDiscus(1975 to October 2011), the Latin American and Caribbean Center on Health Sciences Information (LILACS) [1982 to October 2011] and the Scientific Electronic Library Online (SciELO) [1998 to October 2011] with no limits of date or language of publication. Articles that described the incidence or prevalence rates of RRMIs were considered eligible. Studies that reported only the type of injury, anatomical region or incomplete data that precluded interpretation of the incidence or prevalence rates of RRMIs were excluded. We extracted data regarding bibliometric characteristics, study design, description of the population of runners, RRMI definition, how the data of RRMIs were collected and the name of each RRMI with their rates of incidence or prevalence. Separate analysis for ultra-marathoners was performed. Among 2924 potentially eligible titles, eight studies (pooled n = 3500 runners) were considered eligible for the review. In general, the articles had moderate risk of bias and only one fulfilled less than half of the quality criteria established. A total of 28 RRMIs were found and the main general RRMIs were medial tibial stress syndrome (incidence ranging from 13.6% to 20.0%; prevalence of 9.5%), Achilles tendinopathy (incidence ranging from 9.1% to 10.9%; prevalence ranging from 6.2% to 9.5%) and plantar fasciitis (incidence ranging from 4.5% to 10.0%; prevalence ranging from 5.2% to 17.5%). The main ultra-marathon RRMIs were Achilles tendinopathy (prevalence ranging from 2.0% to 18.5%) and

Radio emission from pre-main-sequence stars in Corona Australis

International Nuclear Information System (INIS)

Brown, A.

1987-01-01

The central region of the Corona Australis molecular cloud surrounding the stars R and TY CrA has been studied using the VLA at 6 cm. Eleven radio sources are detected including five associated with pre-main-sequence objects. The most striking is associated with the near-IR source IRS 7 and shows a complex structure comprising two strong pointlike sources positioned either side of the deeply embedded IR source and two extended lobes of radio emission. The IRS 7 radio source appears to be similar to that associated with Lynds 1551 IRS 5 but has a considerably larger angular size. The other detected sources include the massive pre-main-sequence star TY CrA, the near-IR sources IRS 1 and IRS 5, and the Herbig-Haro object HH 101. The stars R and T CrA were not detected. 35 references

Rural outreach in Maine: A research-driven professional development teacher community

Science.gov (United States)

Wittmann, Michael

2016-03-01

In the Maine Physical Sciences Partnership (MainePSP), researchers at the University of Maine have joined together with the state's Department of Education, non-profits, and teachers in multiple school districts to create a dynamic and growing community dedicated to improving K12 education of the physical sciences. Through ongoing efforts to introduce and adapt instructional materials, guided by education research and research-guided professional development, we have built a community responsive to student and teacher needs. This work has fed back into the university setting, where teachers are playing a role in graduate courses taken by our Master of Science in Teaching students. In this talk, I will focus on the role of education research in the partnership, showing how we use research in professional development, the development of assessments, and the analysis of the resulting data. I will describe two projects, one to understand how teachers' content knowledge affects the development of items assessing knowledge of acceleration, the other to see how teachers use their content knowledge of systems and energy to make pedagogical choices based on students' incorrect ideas about conservation of energy. Sponsored in part by NSF Grants MSP-0962805, DRL-1222580, and DUE-1340033.

Further improvement of human-machine interface for ABWR main control room

International Nuclear Information System (INIS)

Makino, S.

2001-01-01

Tokyo Electric Power Company (TEPCO) has developed main control room panels based on progress in C and I technology. ABWR type main control room panels (ABWR MCR PNLs) are categorized as third generation type domestic BWR MCR, that is, they are were developed step by step based on operating experience with the first and the second generation BWR. ABWR type main control room panels were applied to Kashiwazaki-Kariwa Nuclear Power Station Units Number 6 and 7 (K-6/7) for the first time. K-6/7 are the first advanced BWR (ABWR), which started commercial operation in November 1996 and July 1997, respectively. The concept of ABWR MCR design was verified through wooden mock-up panels, start-up tests and commercial operation. Though the K-6/7 design has borne fruit, we are planning to refine and standardize the design based on the following concepts: to maintain the plant operation and monitoring style of ABWR MCR PNLs; to introduce brand-new HMI technology and devices; to incorporate operators' advice in the design. This paper outlines the features and improvements of the K6/7 MCR PNLs design. (author)

Effects of Main-Sequence Mass Loss on Stellar and Galactic Chemical Evolution.

Science.gov (United States)

Guzik, Joyce Ann

1988-06-01

L. A. Willson, G. H. Bowen and C. Struck -Marcell have proposed that 1 to 3 solar mass stars may experience evolutionarily significant mass loss during the early part of their main-sequence phase. The suggested mass-loss mechanism is pulsation, facilitated by rapid rotation. Initial mass-loss rates may be as large as several times 10^{-9}M o/yr, diminishing over several times 10^8 years. We attempted to test this hypothesis by comparing some theoretical implications with observations. Three areas are addressed: Solar models, cluster HR diagrams, and galactic chemical evolution. Mass-losing solar models were evolved that match the Sun's luminosity and radius at its present age. The most extreme viable models have initial mass 2.0 M o, and mass-loss rates decreasing exponentially over 2-3 times 10^8 years. Compared to a constant -mass model, these models require a reduced initial ^4He abundance, have deeper envelope convection zones and higher ^8B neutrino fluxes. Early processing of present surface layers at higher interior temperatures increases the surface ^3He abundance, destroys Li, Be and B, and decreases the surface C/N ratio following first dredge-up. Evolution calculations incorporating main-sequence mass loss were completed for a grid of models with initial masses 1.25 to 2.0 Mo and mass loss timescales 0.2 to 2.0 Gyr. Cluster HR diagrams synthesized with these models confirm the potential for the hypothesis to explain observed spreads or bifurcations in the upper main sequence, blue stragglers, anomalous giants, and poor fits of main-sequence turnoffs by standard isochrones. Simple closed galactic chemical evolution models were used to test the effects of main-sequence mass loss on the F and G dwarf distribution. Stars between 3.0 M o and a metallicity -dependent lower mass are assumed to lose mass. The models produce a 30 to 60% increase in the stars to stars-plus -remnants ratio, with fewer early-F dwarfs and many more late-F dwarfs remaining on the main

Offshore Wind Resource, Cost, and Economic Potential in the State of Maine

Energy Technology Data Exchange (ETDEWEB)

Musial, Walter D. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-02-12

This report provides information for decision-makers about floating offshore wind technologies in the state of Maine. It summarizes research efforts performed at the National Renewable Energy Laboratory between 2015 and 2017 to analyze the resource potential, cost of offshore wind, and economic potential of offshore wind from four primary reports: Musial et al. (2016); Beiter et al. (2016, 2017); and Mone et al. (unpublished). From Musial et al. (2016), Maine's technical offshore wind resource potential ranked seventh in the nation overall with more than 411 terawatt-hours/year of offshore resource generating potential. Although 90% of this wind resource is greater than 9.0-meters-per-second average velocity, most of the resource is over deep water, where floating wind technology is needed. Levelized cost of energy and levelized avoided cost of energy were computed to estimate the unsubsidized 'economic potential' for Maine in the year 2027 (Beiter et al. 2016, 2017). The studies found that Maine may have 65 gigawatts of economic potential by 2027, the highest of any U.S. state. Bottom-line costs for the Aqua Ventus project, which is part of the U.S. Department of Energy's Advanced Technology Demonstration project, were released from a proprietary report written by NREL in 2016 for the University of Maine (Mone et al. unpublished). The report findings were that economies of scale and new technology advancements lowered the cost from $300/megawatt-hour (MWh) for the two-turbine 12-megawatt (MW) Aqua Ventus 1 project, to $126/MWh for the commercial-scale, 498-MW Aqua Ventus-2 project. Further cost reductions to $77/MWh were found when new technology advancements were applied for the 1,000-MW Aqua Ventus-3 project in 2030. No new analysis was conducted for this report.

Exploring a categorization of main competencies for digital librarians

OpenAIRE

Machin-Mastromatteo, Juan-Daniel

2009-01-01

This brief essay is concerned with the main topic “Job Analysis in a Digital Library Context” and its purpose is to explore some of the competencies that digital librarians must have to successfully work in a digital library context. The competencies explored are categorized under the headings of information management competencies, technological competencies, information literacy related competencies, and interpersonal competencies.

Sense of place along a scenic byway in Maine

Science.gov (United States)

Marilynne Mann; Jessica Leahy

2008-01-01

Sense of place defines the value and meaning of location. The Rangeley Lakes area of Maine, an unusual natural environment with cultural and historic significance, was nationally recognized in 2000 by the designation of the Rangeley Lakes National Scenic Byway. A survey during the summer of 2006 sought to identify sense of place in the midst of tourism-related growth...

Identification of QTLs with main, epistatic and QTL by environment ...

Indian Academy of Sciences (India)

interaction effects for seed shape and hundred-seed weight in soybean ... worldwide. It provides about 69 and 30% of dietary protein ... as main component of plants is affected by seed shape. ... In this analysis, in 2010–2012, seed shape and.

Main hematological parameters of sturgeon species (Acipenseridae (review

Directory of Open Access Journals (Sweden)

M. Simon

2017-03-01

Full Text Available Purpose. To analyze scientific sources on the physiological, biochemical, ecological and genetic features of the main hematological paremeters and patterns of their variability in sturgeon species (Acipenseridae. To examine the fundamental aspects of lipid and protein metabolism in blood serum and the effect of biotic and abiotic factors on them. To highlight the common features of serum enzymes. Findings. A review of scientific papers revealed that although hematological parameters of sturgeons are generally similar to those of teleosts and mammals, there are a number of significant differences. In addition, many hematological parameters are characterized by species specificity, even within a family. Special attention is given to the variability of hematological parameters under the effect of factors of both internal and external environment. The paper describes the effects of sex and age, as well as the seasons of the year on the compositio of sturgeon blood. The fundamentals of the use of serum proteins in genetic and population studies are outlined. The features of the functioning of hemoglobin in sturgeon’s red blood cells are examined. The main hematological parameters involved in the formation and maturation of sexual products, and their effect on fertility are reviewed. For example, the spawners, which hadn’t put reproductive product, are characterized by a low rate of hemoglobin, increase in erythrocyte sedimentation speed and also a rise of the level of crude protein in blood and β-lipoproteid serum.The biochemical parameters (total protein and fractions, glucose, creatinine, cholesterol, the activity of some enzymes (alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, creatine kinase in serum are examined. Practical value. The systematized data on the main hematological parameters and patterns of their variability in sturgeon species will be useful for both scientits and fish farmers. This is due to the

46 CFR 28.820 - Fire pumps, fire mains, fire hydrants, and fire hoses.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Fire pumps, fire mains, fire hydrants, and fire hoses... REQUIREMENTS FOR COMMERCIAL FISHING INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.820 Fire pumps, fire mains, fire hydrants, and fire hoses. (a) Each vessel must be equipped with a self-priming, power driven fire...

On justification of efficient Energy-Force parameters of Hydraulic-excavator main mechanisms

Science.gov (United States)

Komissarov, Anatoliy; Lagunova, Yuliya; Shestakov, Viktor; Lukashuk, Olga

2018-03-01

The article formulates requirements for energy-efficient designs of the operational equipment of a hydraulic excavator (its boom, stick and bucket) and defines, for a mechanism of that equipment, a new term “performance characteristic”. The drives of main rotation mechanisms of the equipment are realized by hydraulic actuators (hydraulic cylinders) and transmission (leverage) mechanisms, with the actuators (the cylinders themselves, their pistons and piston rods) also acting as links of the leverage. Those drives are characterized by the complexity of translating mechanical-energy parameters of the actuators into energy parameters of the driven links (a boom, a stick and a bucket). Relations between those parameters depend as much on the types of mechanical characteristics of the hydraulic actuators as on the types of structural schematics of the transmission mechanisms. To assess how energy-force parameters of the driven links change when a typical operation is performed, it was proposed to calculate performance characteristics of the main mechanisms as represented by a set of values of transfer functions, i.e. by functional dependences between driven links and driving links (actuators). Another term “ideal performance characteristic” of a mechanism was introduced. Based on operation-emulating models for the main mechanisms of hydraulic excavators, analytical expressions were derived to calculate kinematic and force transfer functions of the main mechanisms.

Development of the Main Wing Structure of a High Altitude Long Endurance UAV

Science.gov (United States)

Park, Sang Wook; Shin, Jeong Woo; Kim, Tae-Uk

2018-04-01

To enhance the flight endurance of a HALE UAV, the main wing of the UAV should have a high aspect ratio and low structural weight. Since a main wing constructed with the thin walled and slender components needed for low structural weight can suffer catastrophic failure during flight, it is important to develop a light-weight airframe without sacrificing structural integrity. In this paper, the design of the main wing of the HALE UAV was conducted using spars which were composed of a carbon-epoxy cylindrical tube and bulkheads to achieve both the weight reduction and structural integrity. The spars were sized using numerical analysis considering non-linear deformation under bending moment. Static strength testing of the wing was conducted under the most critical load condition. Then, the experimental results obtained for the wing were compared to the analytical result from the non-linear finite-element analysis. It was found that the developed main wing reduced its structural weight without any failure under the ultimate load condition of the static strength testing.

Lithium evolution in metal-poor stars: from Pre-Main Sequence to the Spite plateau

OpenAIRE

Fu, Xiaoting; Bressan, Alessandro; Molaro, Paolo; Marigo, Paola

2015-01-01

Lithium abundance derived in metal-poor main sequence stars is about three times lower than the value of primordial Li predicted by the standard Big Bang nucleosynthesis when the baryon density is taken from the CMB or the deuterium measurements. This disagreement is generally referred as the lithium problem. We here reconsider the stellar Li evolution from the pre-main sequence to the end of the main sequence phase by introducing the effects of convective overshooting and residual mass accre...

Lubrication analysis of the thrust bearing in the main coolant pump of SMART

International Nuclear Information System (INIS)

Lee, J. S.; Park, J. S.; Kim, J. H.; Hur, H.; Kim, J. I.

2001-01-01

Thrust bearing and journal bearings are installed in the main coolant pump for SMART to support the rotating shaft with proper lubrication. The canned motor type main coolant pumps are arranged vertically on the reactor vessel and especially the MCP bearings are lubricated with water without external lubricating oil supply. Because axial load capacity of the thrust bearing can hardly meet requirement to acquire hydrodynamic or fluid film lubrication state, self-lubrication characteristics of silicon graphite meterials would be needed. Lubricational analysis method for thrust bearing for the main coolant pump of SMART is proposed, and lubricational characteristics of the bearing generated by solving the Reynolds equation are examined in this paper

MK-III function tests in JOYO. Primary main cooling pump

International Nuclear Information System (INIS)

Isozaki, Kazunori; Saito, Takakazu; Sumino, Kouzo; Karube, Kouji; Terano, Toshihiro; Sakaba, Hideo; Nakai, Satoru

2004-06-01

MK-III function test (SKS-1) that was carried out from October 17, 2001 through October 23, 2001 using MK-III transition core configuration and MK-III function tests (SKS-2) was carried out from January 27, 2003 through February 13, 2003 using MK-III core configuration. The major function tests results of primary cooling system were shown as follows; (1) The stability of the primary main pump flow control system was confirmed on both CAS (cascade) mode and Man (manual) mode. Also no divergence of flow and revolution of the pump were observed at step flow change disturbance. (2) The main motor was shifted to run-back flow control operation in about 54 seconds after scram. The flow rate and pump revolution at run-back operation of A and B cooling system were 167 m 3 /h and 117 rpm, 185m 3 /h and 118 rpm respectively. The pump revolution was within the design target revolution 122 rpm ± 8 rpm and the flow was over the 10% of the rated flow. (3) The pony motor was engaged in operation in about 39 seconds after the primary main pump trip. The flow rate and pump revolution at the pony motor operation of A and B cooling system were 180 m 3 /h and 124 rpm, 190 m 3 /h and 123 rpm respectively. These values were satisfied the design low limit of 93 rpm and 10% of the rated flow. (4) Free flow coast down time constant was longer than 10 seconds that was design shortest time at both the primary pump trip and run-back operation. (5) Pump over flow column sodium levels of both A and B cooling system at rated operating condition were NL-1550 mm and, NL-1468 mm respectively and were lower than NL-1581 mm of the design value. This result shows the new IHX pressure loss estimation was conservative. (6) It was confirmed that the primary main pump could operate with out scram for up to 0.6 seconds of external power supply loss. (author)

Arsenic evolution in fractured bedrock wells in central Maine, USA

Science.gov (United States)

Yang, Q.; Zheng, Y.; Culbertson, C.; Schalk, C.; Nielsen, M. G.; Marvinney, R.

2010-12-01

Elevated arsenic concentration in fractured bedrock wells has emerged as an important and challenging health problem, especially in rural areas without public water supply and mandatory monitoring of private wells. This has posed risks of skin, bladder, prostate diseases and cancers to private well users. In central Maine, including the study site, 31% of bedrock wells in meta-sedimentary formations have been reported of elevated arsenic concentrations of > 10 µg/L. Geophysical logging and fracture specific water sampling in high arsenic wells have been conducted to understand how water flowing through the aquifers enters the boreholes and how arsenic evolves in the fracture bedrock wells. Two domestic wells in Manchester, Maine, located 50 meter apart with 38 µg/L and 73 µg/L of arsenic in unfiltered water, were investigated to characterize fractures by geophysical logging and to determine flow rates by pumping test. Water samples, representing the bore hole and the fractures, were collected and analyzed for arsenic under ambient and pumping conditions. Transmissivity of the fractures was estimated at 0.23-10.6 m2/day. Water with high dissolved arsenic was supplied primarily by high yielding fractures near the bottom of the borehole. Dissolved arsenic concentrations in borehole water increased as fracture water with high arsenic was replacing borehole water with initially low dissolved arsenic in response to pumping. The precipitation of iron particulates enriched in arsenic was common during and after pumping. Laboratory experiment on well water samples over a period of 16 days suggested that in the borehole arsenic was mainly settled with iron enriched particles, likely amorphous ferric oxyhydroxides, with possibly minor adsorption on the iron minerals. Another bedrock well in Litchfield, Maine, with 478 µg/L of arsenic in the unfiltered well water, is being investigated to quantify and reconstruct of the groundwater flow under ambient and pumping conditions

Research on design method of main control room intake air radioactive monitoring

International Nuclear Information System (INIS)

Li Lei; Sun Yu; Wang Jiaoya; Liu Hongtao

2014-01-01

According to the design of the main control room intake gamma radiation dose rate monitoring channels in CPR1000 project and the study of relevant regulations and standards, a design method of main control room air inlet radioactive monitoring was presented. The measured object, equipment layout and chain operation were described. The threshold setting was explored using a calculation model established by MCNP software. The advantages, disadvantages and improvement ideas of this design were presented on the basis of calculation results. (authors)

Magnetic measurements of the correction and adjustment magnets of the main ring

International Nuclear Information System (INIS)

Trbojevic, D.

1986-07-01

Correction magnets correct the field imperfections and alignment errors of the main quadrupole and bend magnets. For reducing and controlling chromaticity there are 186 sextupoles and 78 octupoles, while for suppressing various resonances there are 12 normal and 18 skew sextupoles and 24 normal and 19 skew quadrupoles. Beam positions are individually controlled by 108 horizontal and 108 skew dipoles. This report includes results of the all Main Ring correction and adjustment magnet harmonic measurements. The measurement principle and basic equations are described

Siberian snakes for the Fermilab Main Injector

International Nuclear Information System (INIS)

Anferov, V.A.; Baiod, R.; Courant, E.D.

1993-01-01

Appropriate Siberian snakes were designed to maintain the proton beam polarization during acceleration in the Fermilab Main Injector from 8 to 150 GeV. Various snake designs were investigated to find one fitting into the 14 m straight section spaces with the required spin rotation axis and the minimum orbit excursion. The authors studied both cold and warm discrete magnet snakes as well as warm snakes with helical magnets. For the warm discrete magnet snake, obtaining small orbit excursions required a nearly longitudinal snake axis, while axes near ±45 degrees are needed when using two snakes in a ring. The authors found acceptable snakes either by using superconducting magnets or by using warm magnets with a helical dipole field

CBA main magnet power supply ripple reduction

International Nuclear Information System (INIS)

Bagley, G.; Edwards, R.J.

1983-01-01

The preliminary results of a development program to minimize beam perturbation resulting from ripple current generated by the CBA Main Magnet Power Supply are presented. The assessment of the magnitude and causes of the ripple generated led to a modification of the SCR Gate Driver and the addition of a bandpass amplifier correction loop which gave significant improvement. A description of the changes made and the results obtained are included. A second design approach was developed in which the timing of the SCR gate pulses is directly determined by a VCO. The results reported with this VCO Loop indicate superior performance particularly at frequencies below 60 Hz. A shunt transistor regulator design is proposed to minimize higher SCR switching frequency harmonics

What is a compound? The main criteria for compoundhood

Directory of Open Access Journals (Sweden)

Altakhaineh Abdel Rahman Mitib

2016-10-01

Full Text Available This study aims to identify the main cross-linguistic criteria for compoundhood discussed in the relevant literature, with a special focus on English, ranking them from the most reliable to the least. These criteria - orthographic, phonological, syntactic and semantic in nature - have been proposed to make a distinction between compounds and phrases. The analysis reveals that the most reliable cross-linguistic criteria to distinguish between phrases and compounds are adjacency and referentiality. With regard to the former criterion, no intervening elements can be inserted between the head and the non-head of compounds, whilst such insertion is allowed in phrases. With regard to the latter criterion, the non-head of a phrase is always referential, whereas the non-head of a compound is normally non-referential. Other criteria have been found to be partially applicable, e.g. free pluralisation of the non-head, compositionality, stress, possibilities for modification and coordination, ellipsis, orthography and the replacement of the second element by a pro-form. The study also proposes a definition for compounds that may be the most widely applicable. Finally, the study concludes with ranking the main criteria for compoundhood discussed in the study.

Experience with the TRIUMF Main Tank Vacuum Control System

International Nuclear Information System (INIS)

Sarkar, S.; Yandon, J.C.; Sievers, W.; Bennett, P.; Gurd, D.P.; Harmer, P.; Nelson, J.

1993-01-01

The TRIUMF Main Tank Vacuum Control System was upgraded in 1984. The earlier system, which consisted of a collection of hardwired relay logic boxes housed in three standard instrumentation racks, was replaced with a compact and flexible microprocessor-based control system. The user interface, previously distributed over the three racks, was consolidated into a single hardwired control and mimic panel. Since 1984, the Main Tank Vacuum System has undergone a series of changes in configuration and vacuum pumping hardware with necessary changes being implemented in the control system logic. Corresponding changes to the user interface were sometimes difficult to implement and in time exhausted the spare input/output capacity which had been built into the panel. The availability of inexpensive personal computers with adequate graphics capability and the ease of modifying, or adding to a programmable user interface precipitated the retirement of the hardwired panel and its replacement by a PC-based graphics user interface. System configuration, safety considerations, the hardware and the software implementation using the open-quote C close-quote programming language are described. The evolution of the control system and its performance, both over the years and in adapting to the vacuum system changes, are discussed

Short-term forecasting of turbidity in trunk main networks.

Science.gov (United States)

Meyers, Gregory; Kapelan, Zoran; Keedwell, Edward

2017-11-01

Water discolouration is an increasingly important and expensive issue due to rising customer expectations, tighter regulatory demands and ageing Water Distribution Systems (WDSs) in the UK and abroad. This paper presents a new turbidity forecasting methodology capable of aiding operational staff and enabling proactive management strategies. The turbidity forecasting methodology developed here is completely data-driven and does not require hydraulic or water quality network model that is expensive to build and maintain. The methodology is tested and verified on a real trunk main network with observed turbidity measurement data. Results obtained show that the methodology can detect if discolouration material is mobilised, estimate if sufficient turbidity will be generated to exceed a preselected threshold and approximate how long the material will take to reach the downstream meter. Classification based forecasts of turbidity can be reliably made up to 5 h ahead although at the expense of increased false alarm rates. The methodology presented here could be used as an early warning system that can enable a multitude of cost beneficial proactive management strategies to be implemented as an alternative to expensive trunk mains cleaning programs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reconstructing the size distribution of the primordial Main Belt

Science.gov (United States)

Tsirvoulis, G.; Morbidelli, A.; Delbo, M.; Tsiganis, K.

2018-04-01

In this work we aim to constrain the slope of the size distribution of main-belt asteroids, at their primordial state. To do so we turn out attention to the part of the main asteroid belt between 2.82 and 2.96 AU, the so-called "pristine zone", which has a low number density of asteroids and few, well separated asteroid families. Exploiting these unique characteristics, and using a modified version of the hierarchical clustering method we are able to remove the majority of asteroid family members from the region. The remaining, background asteroids should be of primordial origin, as the strong 5/2 and 7/3 mean-motion resonances with Jupiter inhibit transfer of asteroids to and from the neighboring regions. The size-frequency distribution of asteroids in the size range 17 size distribution slope q = - 1.43 . In addition, applying the same 'family extraction' method to the neighboring regions, i.e. the middle and outer belts, and comparing the size distributions of the respective background populations, we find statistical evidence that no large asteroid families of primordial origin had formed in the middle or pristine zones.

Safety measures for the main control board replacement project at Ikata units 1 and 2

International Nuclear Information System (INIS)

Hashimoto, Nozomu; Tada, Kenji

2013-01-01

When Units 1 and 2 of the Ikata Power Station underwent replacement of their main control boards, control cabinets, and associated equipment, it was necessary to remove all the control boards, cabinets, and cables from the control building including from the main control room. This meant the loss of operation and monitoring functions in the main control room and functions of control cabinets. To maintain the operation and monitoring functions required under plant shutdown conditions, temporary operation and monitoring equipment (i.e., temporary main control board) was installed in the temporary main control room. The advance preparations included a trial switching from the permanent to the temporary main control board to identify and address potential problems in advance. When the replacement work was underway, a work schedule sheet posted in the temporary and the permanent control rooms was used to prevent human errors caused by operators’ recognition errors. Monitoring and control signals were switched from the old boards to the temporary boards and from the temporary boards to the new boards at appropriate timings to ensure plant safety during the replacement operation. (author)

CAA modeling of helicopter main rotor in hover

Science.gov (United States)

Kusyumov, Alexander N.; Mikhailov, Sergey A.; Batrakov, Andrey S.; Kusyumov, Sergey A.; Barakos, George

In this work rotor aeroacoustics in hover is considered. Farfield observers are used and the nearfield flow parameters are obtained using the in house HMB and commercial Fluent CFD codes (identical hexa-grids are used for both solvers). Farfield noise at a remote observer position is calculated at post processing stage using FW-H solver implemented in Fluent and HMB. The main rotor of the UH-1H helicopter is considered as a test case for comparison to experimental data. The sound pressure level is estimated for different rotor blade collectives and observation angles.

Defeating Mechanisms of Armours for Main Battle Tanks

Institute of Scientific and Technical Information of China (English)

Manfred Held

2005-01-01

The fundamental protection principles of the new armours for main battle tanks against kinetic energy projectiles (KE) and chemical energy weapons (CE)--shaped charges are shortly described and their efficiency against both threats discussed. The armour topics can be split into: "perpendicular or zero-degree armours", such as rolled homogeneous armour (RHA), also with extremely high strength, ceramics, glass, liquid filled columns and explosive filled cells,"inclined armours", as spaced RHA plates with their corner effects, bulging armour, additive and integrated explosive reactive armours (ERA) and "hard kill active defence possibilities" in different defeating distances.

Operation safety of complex industrial systems. Main concepts

International Nuclear Information System (INIS)

Zwingelstein, G.

2009-01-01

Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

46 CFR 28.315 - Fire pumps, fire mains, fire hydrants, and fire hoses.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Fire pumps, fire mains, fire hydrants, and fire hoses... After September 15, 1991, and That Operate With More Than 16 Individuals on Board § 28.315 Fire pumps, fire mains, fire hydrants, and fire hoses. (a) Each vessel 36 feet (11.8 meters) or more in length must...

A Dynamic Approach to School Improvement : Main Features and Impact

NARCIS (Netherlands)

Creemers, Bert; Kyriakides, L.; Antoniou, P.

2013-01-01

This paper refers to the dynamic approach to school improvement (DASI) which attempts to contribute to the merging of educational effectiveness research and school improvement. The main underlying assumptions and the implementation phases of DASI are discussed. Moreover, a study aiming to compare

The certified Maine North Woods, where money grows from trees

NARCIS (Netherlands)

Correia, David

Beginning in the 1990s, private ownership in Maine forestland shifted from a number of corporate owners to a patchwork of timber investment management organizations (TIMOs) and real estate investment trusts (REITs). This transformation reflected restructuring trends in the paper and pulp industry.

The role of main olfactory and vomeronasal systems in animal ...

African Journals Online (AJOL)

In many terrestrial tetrapod, olfactory sensory communication is mediated by two anatomically and functionally distinct sensory systems; the main olfactory system and vomeronasal system (accessory olfactory system). Recent anatomical studies of the central pathways of the olfactory and vomeronasal systems showed that ...

Virtual Denormalization via Array Index Reference for Main Memory OLAP

NARCIS (Netherlands)

Y. Zhang (Yansong); X. Zhou (Xuan); Y. Zhang (Ying); Y. Zhang (Yu); M. Su (Mingchuan); S. Wang (Shan)

2015-01-01

htmlabstractDenormalization is a common tactic for enhancing performance of data warehouses, though its side-effect is quite obvious. Besides being confronted with update abnormality, denormalization has to consume additional storage space. As a result, this tactic is rarely used in main memory

A Study of Failure Modes in the ILC Main Linac

CERN Document Server

Eliasson, Peder; Krücker, Dirk; Latina, Andrea; Poirier, Freddy; Schulte, Daniel; Walker, Nicholas John; Xia, Guoxing

2006-01-01

Failures in the ILC can lead to beam loss or even damage the machine. In the paper quadrupole failures and errors in the klystron phase are being investigated and the impact on the machine protection is being considered for the main linac.

Study on the main control room design for Hamaoka Unit No.5

International Nuclear Information System (INIS)

Tsuruta, Tadakazu; Sakamoto, Minoru; Maruyama, Tohru; Saito, Tadashi

2000-01-01

The main control room of nuclear power station is important to operate the power station and to promote public acceptance of nuclear power station. To enhance them, there is an idea of high ceiling control room with a gallery room located in backside middle upper floor. The control room is expected to enhance habitability and to offer visitors the fine view of the control room. In this study, psychological and physiological influence of such a high ceiling control room design on operators was investigated first. And then some human engineering requirements for desirable main control room were identified. A control room (ceiling height: about 5 meters) adequate to the requirements was designed, and finally the validity of the design was verified by means of full mockup model room tests. The results of this study are applied to the main control room design of Hamaoka Nuclear Power Station Unit No.5 (Chubu Electric Power Co., Inc.) (author)

The Hawaii trails project: comet-hunting in the main asteroid belt

Science.gov (United States)

Hsieh, H. H.

2009-10-01

Context: The mysterious solar system object 133P/(7968) Elst-Pizarro is dynamically asteroidal, yet displays recurrent comet-like dust emission. Two scenarios were hypothesized to explain this unusual behavior: 1) 133P is a classical comet from the outer solar system that has evolved onto a main-belt orbit or 2) 133P is a dynamically ordinary main-belt asteroid on which subsurface ice has recently been exposed. If 1) is correct, the expected rarity of a dynamical transition onto an asteroidal orbit implies that 133P could be alone in the main belt. In contrast, if 2) is correct, other icy main-belt objects should exist and could also exhibit cometary activity. Aims: Believing 133P to be a dynamically ordinary, yet icy main-belt asteroid, I set out to test the primary prediction of the hypothesis: that 133P-like objects should be common and could be found by an appropriately designed observational survey. Methods: I conducted just such a survey - the Hawaii Trails Project - of selected main-belt asteroids in a search for objects displaying cometary activity. Optical observations were made of targets selected from among the Themis, Koronis, and Veritas asteroid families, the Karin asteroid cluster, and low-inclination, kilometer-scale outer-belt asteroids, using the Lulin 1.0 m, small and moderate aperture research telescope system (SMARTS) 1.0 m, University of Hawaii 2.2 m, southern astrophysical research (SOAR) 4.1 m, Gemini North 8.1 m, Subaru 8.2 m, and Keck I 10 m telescopes. Results: I made 657 observations of 599 asteroids, discovering one active object now known as 176P/LINEAR, leading to the identification of the new cometary class of main-belt comets (MBCs). These results suggest that there could be ~100 currently active MBCs among low-inclination, kilometer-scale outer-belt asteroids. Physically and statistically, MBC activity is consistent with initiation by meter-sized impactors. The estimated rate of impacts and sizes of resulting active sites, however

NOAA Office for Coastal Management and Maine Department of Marine Resources Benthic Habitat Data, coastal Maine and York and Webhannet rivers, 1993-2001 (NODC Accession 0089462)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Maine's eelgrass (SAV) meadows form an important aquatic habitat for the state. These meadows provide shelter for juvenile fish, and invertebrates. In certain...

A new Main Control Room for the AGS complex

International Nuclear Information System (INIS)

Ingrassia, P.F.; Zaharatos, R.M.; Dyling, O.H.

1991-01-01

A new Main Control Room (MCR) has been built to control the accelerators of the AGS Complex. A new physical environment was produced to better control light, sound, temperature, and traffic. New control consoles were built around the work-stations that make up the distributed control system. Equipment placement within consoles and console placement within the room reflect attention to the 'human factors' needs of the operator

76 FR 59482 - The New Brunswick Railway Company-Continuance in Control Exemption-Maine Northern Railway Company...

Science.gov (United States)

2011-09-26

... requirements of 49 U.S.C. 11323-25, for Eastern Maine Railway, a Class III rail common carrier to continue in... Exemption-- Montreal, Maine & Atlantic Railway, Ltd.; Maine Northern Railway Company--Modified Rail...

Design optimization of single-main-amplifier KrF laser-fusion systems

International Nuclear Information System (INIS)

Harris, D.B.; Pendergrass, J.H.

1985-01-01

KrF lasers appear to be a very promising laser fusion driver for commercial applications. The Large Amplifier Module for the Aurora Laser System at Los Alamos is the largest KrF laser in the world and is currently operating at 5 kJ with 10 to 15 kJ eventually expected. The next generation system is anticipated to be a single-main-amplifier system that generates approximately 100 kJ. This paper examines the cost and efficiency tradeoffs for a complete single-main-amplifier KrF laser fusion experimental facility. It has been found that a 7% efficient $310/joule complete laser-fusion system is possible by using large amplifier modules and high optical fluences

Correlation between auroral activity and rate of development of a storm in its main phase

Directory of Open Access Journals (Sweden)

Boroyev R.N.

2016-12-01

Full Text Available We investigated the relationship between the rate of storm development in its main phase (|ΔDst|/ΔT and the average value (ΣAE/ΔT of AE index for the main phase where |ΔDst| is the Dst-index variation, ΣAE is the total value of AE index for the main phase of magnetic storm, ΔT is the main phase duration. We considered storms initiated by corotating interaction region (CIR and interplanetary coronal mass ejection (ICME (magnetic cloud and ejecta. For CIR events, the value of ΣAE/ΔT is shown to correlate with the rate of storm development in its main phase in contrast to the storms initiated by the ICME. As found, there is a weak correlation between ΣAE/ΔT and the minimum value of Dst index for CIR and ICME events.

Dynamical evolution of V-type photometric candidates in the central and outer main belt asteroids

Science.gov (United States)

Carruba, V.; Huaman, M.

2014-07-01

V-type asteroids are associated with basaltic composition, and are supposed to be fragments of crust of differentiated objects. Most V-type asteroids in the main belt are found in the inner main belt, and are either current members of the Vesta dynamical family (Vestoids), or past members that drifted away. However, several V-type photometric candidates have been recently identified in the central and outer main belt. The origin of this large population of V-type objects is not well understood, since it seems unlikely that Vestoids crossing the 3:1 and 5:2 mean-motion resonance with Jupiter could account for the whole observed population. In this work, we investigated a possible origin of the bodies from local sources, such as the parent bodies of the Eunomia, Merxia, and Agnia asteroid families in the central main belt, and Dembowska, Eos and Magnya asteroid families in the outer main belt. Our results show that dynamical evolution from the parent bodies of the Eunomia and Merxia/Agnia families on timescales of 2 Gyr or more could be responsible for the current orbital location of most of the V-type photometric candidates in the central main belt. Studies for the outer main belt are currently in progress. by the FAPESP (grant 2011/19863-3) and CAPES (grant 15029-12-3) funding agencies.

On the ergodic secrecy capacity of the wiretap channel under imperfect main channel estimation

KAUST Repository

Rezki, Zouheir

2011-11-01

The ergodic secrecy capacity of the wiretap channel is known when the main channel (between the transmitter and the legitimate receiver) state information (CSI) is perfect at the transmitter and the coherence period is sufficiently large to enable random coding arguments in each block. In a fast fading scenario, when the codeword length spans many coherence periods, the secrecy capacity is still not known. In this paper, we present a framework that characterizes this secrecy capacity under imperfect main channel estimation at the transmitter. Inner and outer bounds on the ergodic secrecy capacity are derived for a class of independent identically distributed (i.i.d.) fading channels. The achievable rate is a simple on-off scheme using a Gaussian input. The upper bound is obtained using an appropriate correlation scheme of the main and the eavesdropper channels. The upper and the lower bounds coincide with recently derived ones in the perfect main CSI extreme. Furthermore, the lower bound matches the upper bound in no main CSI extreme, where the secrecy capacity is equal to zero. Numerical results are provided for independent identically distributed (i.i.d.) Rayleigh fading channels. © 2011 IEEE.

Constraining the magnitude of the largest event in a foreshock-main shock-aftershock sequence

Science.gov (United States)

Shcherbakov, Robert; Zhuang, Jiancang; Ogata, Yosihiko

2018-01-01

Extreme value statistics and Bayesian methods are used to constrain the magnitudes of the largest expected earthquakes in a sequence governed by the parametric time-dependent occurrence rate and frequency-magnitude statistics. The Bayesian predictive distribution for the magnitude of the largest event in a sequence is derived. Two types of sequences are considered, that is, the classical aftershock sequences generated by large main shocks and the aftershocks generated by large foreshocks preceding a main shock. For the former sequences, the early aftershocks during a training time interval are used to constrain the magnitude of the future extreme event during the forecasting time interval. For the latter sequences, the earthquakes preceding the main shock are used to constrain the magnitudes of the subsequent extreme events including the main shock. The analysis is applied retrospectively to past prominent earthquake sequences.

State of Maine residential heating oil survey: 1995--1996 season summary

International Nuclear Information System (INIS)

Elder, B.

1996-05-01

In Maine the cash price is surveyed, as opposed to lthe retail or charge price, as it has been identified as the price most often paid by Maine consumers. As one can see from the chart in this report, the 1995-1996 cash prices for No. 2 heating oil can be characterized as having an upward trend and much more fluctuation than last years' relatively flat line. The 1995-96 heating season started at the closing price of the previous season and for the first few weeks prices were lower than most of the 1994-95 trendline. When the weather became cooler, however, prices were on a steady incline until well into the winter. Prices leveled off for most of the rest of the season with a dramatic surge on the last week of the survey. The average statewide cash price for No. 2 heating oil this year was .861 1 cents, approximately ten cents higher than the average for 1994-1995 which was .7661 cents per gallon. It has been the observation of the SPO that during most of the 1995-1996 season, Maine's prices showed a direct correspondence with New England rack or wholesale prices. It appeared that they never fluctuated more than 3-4 cents from each other

Fusion reactor blanket-main design aspects

International Nuclear Information System (INIS)

Strebkov, Yu.; Sidorov, A.; Danilov, I.

1994-01-01

The main function of the fusion reactor blanket is ensuring tritium breeding and radiation shield. The blanket version depends on the reactor type (experimental, DEMO, commercial) and its parameters. Blanket operation conditions are defined with the heat flux, neutron load/fluence, cyclic operation, dynamic heating/force loading, MHD effects etc. DEMO/commercial blanket design is distinguished e.g. by rather high heat load and neutron fluence - up to 100 W/cm 2 and 7 MWa/m 2 accordingly. This conditions impose specific requirements for the materials, structure, maintenance of the blanket and its most loaded components - FW and limiter. The liquid Li-Pb eutectic is one of the possible breeder for different kinds of blanket in view of its advantages one of which is the blanket convertibility that allow to have shielding blanket (borated water) or breeding one (Li-Pb eutectic). Using Li-Pb eutectic for both ITER and DEMO blankets have been considered. In the conceptual ITER design the solid eutectic blanket was carried out. The liquid eutectic breeder/coolant is suggested also for the advanced (high parameter) blanket

Mobilité de la main-d'oeuvre féminine en Asie : migration

International Development Research Centre (IDRC) Digital Library (Canada)

Document de travail 1: Mobilité de la main-d'oeuvre féminine en Asie : migration transnationale, protection sociale et citoyenneté. 13 décembre 2010. Naila Kabeer. Ce document passe en revue l'ensemble des travaux portant sur les mouvements migratoires de la main-d'oeuvre féminine en Asie du point de vue de la ...

Linking the collisional history of the main asteroid belt to its dynamical excitation and depletion

Science.gov (United States)

Bottke, William F.; Durda, Daniel D.; Nesvorný, David; Jedicke, Robert; Morbidelli, Alessandro; Vokrouhlický, David; Levison, Harold F.

2005-12-01

The main belt is believed to have originally contained an Earth mass or more of material, enough to allow the asteroids to accrete on relatively short timescales. The present-day main belt, however, only contains ˜5×10 Earth masses. Numerical simulations suggest that this mass loss can be explained by the dynamical depletion of main belt material via gravitational perturbations from planetary embryos and a newly-formed Jupiter. To explore this scenario, we combined dynamical results from Petit et al. [Petit, J. Morbidelli, A., Chambers, J., 2001. The primordial excitation and clearing of the asteroid belt. Icarus 153, 338-347] with a collisional evolution code capable of tracking how the main belt undergoes comminution and dynamical depletion over 4.6 Gyr [Bottke, W.F., Durda, D., Nesvorny, D., Jedicke, R., Morbidelli, A., Vokrouhlický, D., Levison, H., 2005. The fossilized size distribution of the main asteroid belt. Icarus 175, 111-140]. Our results were constrained by the main belt's size-frequency distribution, the number of asteroid families produced by disruption events from diameter D>100 km parent bodies over the last 3-4 Gyr, the presence of a single large impact crater on Vesta's intact basaltic crust, and the relatively constant lunar and terrestrial impactor flux over the last 3 Gyr. We used our model to set limits on the initial size of the main belt as well as Jupiter's formation time. We find the most likely formation time for Jupiter was 3.3±2.6 Myr after the onset of fragmentation in the main belt. These results are consistent with the estimated mean disk lifetime of 3 Myr predicted by Haisch et al. [Haisch, K.E., Lada, E.A., Lada, C.J., 2001. Disk frequencies and lifetimes in young clusters. Astrophys. J. 553, L153-L156]. The post-accretion main belt population, in the form of diameter D≲1000 km planetesimals, was likely to have been 160±40 times the current main belt's mass. This corresponds to 0.06-0.1 Earth masses, only a small fraction

La Main à la pâte : un site Internet pour l'enseignement des sciences ...

International Development Research Centre (IDRC) Digital Library (Canada)

La Main à la pâte : un site Internet pour l'enseignement des sciences aux écoliers (Egypte). La Main à la pâte (www.lamap.fr) est une ... for submissions: Cultivate Africa's Future - Phase 2. The main objective of this competitive research fund is to support applied research in areas vital to achieving long-term food security.

Radial oil injection applied to main engine bearings: evaluation of injection control rules

DEFF Research Database (Denmark)

Estupiñan, EA; Santos, Ilmar

2012-01-01

, the dynamic behaviour of the main bearing of a medium-size engine is theoretically analysed when the engine operates with controllable radial oil injection and four different injection control rules. The theoretical investigation is based on a single-cylinder combustion engine model. The performance......The performance of main bearings in a combustion engine affects key functions such as durability, noise and vibration. Thus, with the aim of reducing friction losses and vibrations between the crankshaft and the bearings, the work reported here evaluates different strategies for applying...... controllable radial oil injection to main crankshaft journal bearings. In an actively lubricated bearing, conventional hydrodynamic lubrication is combined with controllable hydrostatic lubrication, where the oil injection pressures can be modified depending on the operational conditions. In this study...

Ancestral amphibian v2rs are expressed in the main olfactory epithelium

Science.gov (United States)

Syed, Adnan S.; Sansone, Alfredo; Nadler, Walter; Manzini, Ivan; Korsching, Sigrun I.

2013-01-01

Mammalian olfactory receptor families are segregated into different olfactory organs, with type 2 vomeronasal receptor (v2r) genes expressed in a basal layer of the vomeronasal epithelium. In contrast, teleost fish v2r genes are intermingled with all other olfactory receptor genes in a single sensory surface. We report here that, strikingly different from both lineages, the v2r gene family of the amphibian Xenopus laevis is expressed in the main olfactory as well as the vomeronasal epithelium. Interestingly, late diverging v2r genes are expressed exclusively in the vomeronasal epithelium, whereas “ancestral” v2r genes, including the single member of v2r family C, are restricted to the main olfactory epithelium. Moreover, within the main olfactory epithelium, v2r genes are expressed in a basal zone, partially overlapping, but clearly distinct from an apical zone of olfactory marker protein and odorant receptor-expressing cells. These zones are also apparent in the spatial distribution of odor responses, enabling a tentative assignment of odor responses to olfactory receptor gene families. Responses to alcohols, aldehydes, and ketones show an apical localization, consistent with being mediated by odorant receptors, whereas amino acid responses overlap extensively with the basal v2r-expressing zone. The unique bimodal v2r expression pattern in main and accessory olfactory system of amphibians presents an excellent opportunity to study the transition of v2r gene expression during evolution of higher vertebrates. PMID:23613591

The SAMI Galaxy Survey: spatially resolving the main sequence of star formation

Science.gov (United States)

Medling, Anne M.; Cortese, Luca; Croom, Scott M.; Green, Andrew W.; Groves, Brent; Hampton, Elise; Ho, I.-Ting; Davies, Luke J. M.; Kewley, Lisa J.; Moffett, Amanda J.; Schaefer, Adam L.; Taylor, Edward; Zafar, Tayyaba; Bekki, Kenji; Bland-Hawthorn, Joss; Bloom, Jessica V.; Brough, Sarah; Bryant, Julia J.; Catinella, Barbara; Cecil, Gerald; Colless, Matthew; Couch, Warrick J.; Drinkwater, Michael J.; Driver, Simon P.; Federrath, Christoph; Foster, Caroline; Goldstein, Gregory; Goodwin, Michael; Hopkins, Andrew; Lawrence, J. S.; Leslie, Sarah K.; Lewis, Geraint F.; Lorente, Nuria P. F.; Owers, Matt S.; McDermid, Richard; Richards, Samuel N.; Sharp, Robert; Scott, Nicholas; Sweet, Sarah M.; Taranu, Dan S.; Tescari, Edoardo; Tonini, Chiara; van de Sande, Jesse; Walcher, C. Jakob; Wright, Angus

2018-04-01

We present the ˜800 star formation rate maps for the Sydney-AAO Multi-object Integral field spectrograph (SAMI) Galaxy Survey based on H α emission maps, corrected for dust attenuation via the Balmer decrement, that are included in the SAMI Public Data Release 1. We mask out spaxels contaminated by non-stellar emission using the [O III]/H β, [N II]/H α, [S II]/H α, and [O I]/H α line ratios. Using these maps, we examine the global and resolved star-forming main sequences of SAMI galaxies as a function of morphology, environmental density, and stellar mass. Galaxies further below the star-forming main sequence are more likely to have flatter star formation profiles. Early-type galaxies split into two populations with similar stellar masses and central stellar mass surface densities. The main-sequence population has centrally concentrated star formation similar to late-type galaxies, while galaxies >3σ below the main sequence show significantly reduced star formation most strikingly in the nuclear regions. The split populations support a two-step quenching mechanism, wherein halo mass first cuts off the gas supply and remaining gas continues to form stars until the local stellar mass surface density can stabilize the reduced remaining fuel against further star formation. Across all morphologies, galaxies in denser environments show a decreased specific star formation rate from the outside in, supporting an environmental cause for quenching, such as ram-pressure stripping or galaxy interactions.

Main - TP Atlas | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...me: tp_atlas_en.zip File URL: ftp://ftp.biosciencedbc.jp/archive/tp_atlas/LATEST/...d License Update History of This Database Site Policy | Contact Us Main - TP Atlas | LSDB Archive ...

Islet neogenesis is stimulated by brief occlusion of the main ...

African Journals Online (AJOL)

Islet neogenesis is stimulated by brief occlusion of the main pancreatic duct. ... South African Medical Journal ... where the initial events that culminate in increased pancreatic endocrine mass caube studied. ... The animals were killed 56 days post .occlusion, and the pancreata excised and fiXed tor histological analysis.

Uncertainty analysis of one Main Circulation Pump trip event at the Ignalina NPP

International Nuclear Information System (INIS)

Vileiniskis, V.; Kaliatka, A.; Uspuras, E.

2004-01-01

One Main Circulation Pump (MCP) trip event is an anticipated transient with expected frequency of approximately one event per year. There were a few events when one MCP was inadvertently tripped. The throughput of the rest running pumps in the affected Main Circulation Circuit loop increased, however, the total coolant flow through the affected loop decreased. The main question arises whether this coolant flow rate is sufficient for adequate core cooling. This paper presents an investigation of one MCP trip event at the Ignalina NPP. According to international practice, the transient analysis should consist of deterministic analysis by employing best-estimate codes and uncertainty analysis. For that purpose, the plant's RELAP5 model and the GRS (Germany) System for Uncertainty and Sensitivity Analysis package (SUSA) were employed. Uncertainty analysis of flow energy loss in different parts of the Main Circulation Circuit, initial conditions and code-selected models was performed. Such analysis allows to estimate the influence of separate parameters on calculation results and to find the modelling parameters that have the largest impact on the event studied. On the basis of this analysis, recommendations for the further improvement of the model have been developed. (author)