WorldWideScience

Sample records for main s-process components

  1. Main heat transfer components for SNR-300

    International Nuclear Information System (INIS)

    De Haas Van Dorsser, A.H.

    1976-01-01

    Early in the joint German-Belgium-Dutch fast breeder programme it was decided that all main components should be tested, if possible at full scale, before fabrication of the actual SNR-300 components. Descriptions are given of the results of testing, and subsequent modifications, of the pumps, intermediate heat exchangers, and steam generators. A full scale model of the primary pump, free surface vertical shaft centrifugal type, was constructed and tested in the 5000 cubic metres per hour pump test facility erected at Bensberg. A 70 MW model of an intermediate heat exchanger, straight tube type with floating head, was tested in the 50 MW steam generator test station at Hengelo. Also tested in the Hengelo facility was an almost full scale straight tube 50 MW steam generator and subsequently a 50 MW helical tube evaporator. The latter tests were of more than 3000 h operation and resulted in minor changes in design and manufacturing operation. (U.K.)

  2. Interaction between main components in wind farms

    DEFF Research Database (Denmark)

    Holdyk, Andrzej; Koldby, Erik

    and the simplicity of the measurement methods using the device makes it a good candidate for performing black-box modelling of multiports whenever such models are not available from the manufacturers. Parametric variation method developed for EMT simulations in ATP-EMTP is a good tool for performing large...... with Frequency Domain Severity Factor proved to be a robust tool in assessing stresses on electric components arising from transient phenomena in offshore wind farms, including the voltage magnitude and frequency of oscillations. Quarter-wave resonance frequency is a good approximation of resonance frequency...... as well as performing parametric variation studies. Methods and tools were developed and shown to perform and estimate the severity of a potential mid- and high- frequency interaction between electric components in OWFs by robust sensitivity analysis in commercial EMT simulation tool. Performing...

  3. Main components of business cards design

    Directory of Open Access Journals (Sweden)

    Ю. В. Романенкова

    2003-03-01

    Full Text Available The essay is dedicated to the urgent problem of necessity of creation of professional design of business cards, that are important part of the image of modem businessman. There are classification of cards by functional principle, the functions of cards of each type were analyzed. All components of business card, variants of its composition schemes, color characteristics, principles of use of trade marks and other design elements have been allocated

  4. Main components and content of sports volunteer activities

    OpenAIRE

    Петренко, Ірина

    2017-01-01

    Iryna PetrenkоPurpose: identification of the main structural components and content of sports volunteer activities. Material & Methods: used analysis of literature and documents, organizational analysis. Result: basic structural components of sports volunteer activity are defined. The content of sports volunteer activity is disclosed. Conclusion: sports volunteer activity includes the following structural components: subject, object, purpose, motivation, means, actions; subject is a sport...

  5. The main objectives of lifetime management of reactor unit components

    International Nuclear Information System (INIS)

    Dragunov, Y.; Kurakov, Y.

    1998-01-01

    The main objectives of the work concerned with life management of reactor components in Russian Federation are as follows: development of regulations in the field of NPP components ageing and lifetime management; investigations of ageing processes; residual life evaluation taking into account the actual state of NPP systems, real loading conditions and number of load cycles, results of in-service inspections; development and implementation of measures for maintaining/enhancing the NPP safety

  6. Three-dimensional tolerance investigation on main ITER components

    International Nuclear Information System (INIS)

    Reich, J.; Chiocchio, S.; Cordier, J.-J.; Gallix, R.; Guerin, O.; Halcrow, T.

    2009-01-01

    ITER has to focus on all processes that ensure the permanent consistency between the requirements of ITER and the performance attributes of its components. This includes integration tolerance studies. One of the main goals of this work is to establish a sufficient tolerance scheme for all main components. The investigation in sufficient tolerance studies at a very early stage of the project will result in cost savings during the installation process. Due to the complexity of the ITER components and their several interfaces to their surroundings, it is advantageous to perform tolerance studies with a specialised tool like 'three-dimensional control systems' (3DCS) that is compatible with the ITER CATIA-V5 CAD engineering system and Enovia PRC environment. On single components (e.g. Magnet TF Coils) detailed two-dimensional tolerance schemes have been developed from the beginning. Using them as a starting point, functional or key interface tolerances have to be defined. Furthermore the tolerance studies have to consider the different configurations of each component (e.g. manufacturing stages, assembly plan, integration with surrounding, operation conditions). Especially for assembly it is necessary to analyse the final ranges which have to be achieved during the installation process. From the integration point of view, the key tolerances of all main in-cryostat ITER components have to be brought together in a complete and consistent manner.

  7. Component biomass equations for black spruce in Maine

    Science.gov (United States)

    M. M. Czapowskyj; D. J. Robison; R. D. Briggs; E. H. White; E. H. White

    1985-01-01

    Component biomass prediction equations are presented for young black spruce (Picea mariana B.S.P. (Mill,:)) in northern Maine. A weighted least squares model was used to construct the eq~iationsfo r small trees from 1 to 15 cm d.b.h., and an ordinary least squares model for trees less than 2 m in height. A linearized allometric model was also tested but was not used....

  8. Main components and content of sports volunteer activities

    Directory of Open Access Journals (Sweden)

    Iryna Petrenkо

    2017-12-01

    Full Text Available Purpose: identification of the main structural components and content of sports volunteer activities. Material & Methods: used analysis of literature and documents, organizational analysis. Result: basic structural components of sports volunteer activity are defined. The content of sports volunteer activity is disclosed. Conclusion: sports volunteer activity includes the following structural components: subject, object, purpose, motivation, means, actions; subject is a sports volunteer, the object is a sports competition, the goal is to provide gratuitous assistance for a quality competition, the means are the special knowledge, skills, communication abilities of sports volunteers, actions should be understood as types of volunteer activities and functions that volunteers perform during the preparation and conduct of competitions. Main types of sports volunteer activity are: 1 organizational; 2 judiciary; 3 coaching; 4 legal; 5 medical. Functions that volunteers perform in the competition system are general and special. Content of the functions of sports volunteering depends on the specifics of the sports, the rank of the competition, the specifics of the competition for people with special needs.

  9. Smart Grids: short history, main components and perspectives

    International Nuclear Information System (INIS)

    Belhomme, R.; Maire, J.

    2010-01-01

    This paper tries to describe the smart grids in their entirety. In a first part, two definitions are given for the smart grids, the main drivers for their development are briefly described, along with an overview of the initiatives and projects in different parts of the world: Europe, USA, Asia and Pacific area. The second part is devoted to the main components of the smart grids. The following are considered: distributed generation and renewables, energy storage, demand side integration, intelligent buildings, smart meters, communication infrastructures, distribution and transmission networks, micro-grids, flexibility of the generation park, electric vehicles and regulatory issues. Finally, the conclusion gives a short discussion of some important issues, as well as of the benefits of demonstration projects. (authors)

  10. Myoepithelial cells are the main component in pleomorphic adenomas?

    Science.gov (United States)

    Ponce Bravo, Santa; Ledesma Montes, Constantino; López Becerril, Uriel; Morales Sánchez, Israel

    2007-03-01

    The aim of this study was to quantify by immunohistochemistry the number of myoepithelial cells (MyECs) in pleomorphic adenomas (PAs). We retrieved the paraffin cubes of 27 PAs, new slides were done and they were stained with anti-S100 protein antibody. The amount of S-100 protein positive cells was quantified, their morphology was recorded and comparison among MyEC number with age, gender and involved gland were also done. With S-100 protein, MyECs in normal salivary gland tissue were seen surrounding the ductual structures only. In the analysed PAs a mean of 27.4% of the neoplastic cells were positive to the antibody. With the exception of one PA, in all the analysed cases the plasmacytoid cells were the most commonly identified cells (48,6%). Results of this study suggest that MyECs do not constitute the main cellular component of the neoplastic compartment in PAs and corroborate the previously reported evidence by different authors, who studying the PAs suggested that MyECs does not comprise the main cellular neoplastic component of these entities.

  11. Main photoautotrophic components of biofilms in natural draft cooling towers.

    Science.gov (United States)

    Hauer, Tomáš; Čapek, Petr; Böhmová, Petra

    2016-05-01

    While photoautotrophic organisms are an important component of biofilms that live in certain regions of natural draft cooling towers, little is known about these communities. We therefore examined 18 towers at nine sites to identify the general patterns of community assembly in three distinct tower parts, and we examined how community structures differ depending on geography. We also compared the newly acquired data with previously published data. The bottom sections of draft cooling towers are mainly settled by large filamentous algae, primarily Cladophora glomerata. The central portions of towers host a small amount of planktic algae biomass originating in the cooling water. The upper fourths of towers are colonized by biofilms primarily dominated by cyanobacteria, e.g., members of the genera Gloeocapsa and Scytonema. A total of 41 taxa of phototrophic microorganisms were identified. Species composition of the upper fourth of all towers was significantly affected by cardinal position. There was different species composition at positions facing north compared to positions facing south. West- and east-facing positions were transitory and highly similar to each other in terms of species composition. Biofilms contribute to the degradation of paint coatings inside towers.

  12. Evaluation of material integrity on electricity generator water steam cycles component (Main Steam Pipe)

    International Nuclear Information System (INIS)

    Sudardjo; Histori; Triyadi, Ari

    1998-01-01

    The evaluation of material integrity on electricity generator component has been done. That component was main steam pipe of Unit II Suralaya Coal Fired Power Plant. evaluation was done by replication technique. The damage was found are two porosity's, from two point samples of six points sample population. Based on cavity evaluation in steels, which proposed by Neubauer and Wedel that porosity's still at class A damage. For class A damage, its means no remedial action would be required until next major scheduled maintenance outage. That porosity's was grouped on isolated cavities and not need ti repair that main steam pipe component less than three year after replication test

  13. Main Quality Attributes of Monoclonal Antibodies and Effect of Cell Culture Components

    Science.gov (United States)

    Torkashvand, Fatemeh; Vaziri, Behrouz

    2017-05-01

    The culture media optimization is an inevitable part of upstream process development in therapeutic monoclonal antibodies (mAbs) production. The quality by design (QbD) approach defines the assured quality of the final product through the development stage. An important step in QbD is determination of the main quality attributes. During the media optimization, some of the main quality attributes such as glycosylation pattern, charge variants, aggregates, and low-molecular-weight species, could be significantly altered. Here, we provide an overview of how cell culture medium components affects the main quality attributes of the mAbs. Knowing the relationship between the culture media components and the main quality attributes could be successfully utilized for a rational optimization of mammalian cell culture media for industrial mAbs production.

  14. The Logical-Semantic Basis for Formation of Main Components of Enterprise Strategy

    Directory of Open Access Journals (Sweden)

    Polyakova Yana O.

    2016-11-01

    Full Text Available The modern interpretation of the essence of enterprise strategy implies transformation of internal characteristics of the enterprise into key success factors in accordance with conditions of the functioning of external environment in order to ensure its sustainable leadership position in the long term and is one of the main elements of the system of enterprise strategic management in today’s business environment. The result of the conducted research is the improvement of the logical-semantic structure of main components of enterprise strategy through the implementation of research by the inductive method, which allowed to determine the logical sequence of stages of forming key success factors, reveal the conditions for transformation of main elements of each stage and conduct a semantic evaluation of the structure of main components of enterprise strategy at each individual stage to implement the processes of goal setting and evaluate results of the implementation of the chosen business strategy.

  15. Design, construction, qualification and reliability of main components, from the safety aspect

    International Nuclear Information System (INIS)

    Crette, J.P.

    1982-01-01

    In FRANCE, the design and construction of reliable components, which condition the safe operation and availability of breeder plants, is based on the experience acquired during the operation of RAPSODIE, PHENIX and the various test facilities. The technical progress achieved on all main components is illustrated by examples taken from the CREYS-MALVILLE plant. In parallel with the development of these components, an extensive program covering research, development and the definition of design, construction and inspection rules, together with scheduling and quality assurance methods, prepares the industrialization of this reactor system, in compliance with the rules and recommendations issued by the pertinent safety authorities

  16. Modern technical diagnostic system for the main components of powerful turbine generator

    International Nuclear Information System (INIS)

    Ezovit, G.P.; Uglyarenko, V.P.; Burlaka, S.I.; Goroz, N.I.; Orinin, S.E.; Komaritsa, V.N.; Zav'yalov, D.N.; Mazurenko, O.A.

    2011-01-01

    The modern diagnostic system to monitor the technical state of a powerful turbine generator is considered. This system permits the detection of defects in its main components and cooling system at the early stage of their development, prevention of damage and, as a consequence, emergency shutdown of nuclear power units

  17. Service Life Of Main Piping Component Due To Low Thermal Stresses.Fatigue

    International Nuclear Information System (INIS)

    Miroshnik, R.; Jeager, A.; Ben Haim, H.

    1998-01-01

    The paper deals with estimating the service life of the power station Main piping component and describing the repair process for extending of its service life. After a long period of service, several circular fatigue cracks have been discovered at the bottom of the Main piping component chamber. Finite element analyses of transient thermal stresses, caused by power station startup, are carried out in the paper. The calculation results show good agreement between the theoretical locations of the maximum stresses and the actual locations of the cracks. There is a good agreement between theoretical evaluation and actual service life, as well. The possibility of machining out the cracks in order to prevent their growing is examined here. The machining enables us to extend the power station component's life service

  18. [Analysis of the main components of inner ear antigens inducing autoimmune Meniere's disease in guinea pigs].

    Science.gov (United States)

    Lu, Ling; Tan, Chang-Qiang; Cui, Yu-Gui; Ding, Gui-Peng; Ju, Xiao-Bin; Li, Yu-Jin; Cai, Wen-Jun

    2008-08-01

    To investigate the main components of inner ear antigens inducing autoimmune Meniere's disease (AIMD) in guinea pigs. The guinea pigs were immunized with isologous crude inner ear antigens (ICIEAg). Then, the hearing function was measured with auditory brainstem response (ABR), the vestibular function was measured with electronystagmography (including spontaneous nystagmus and caloric test), and inner ear histopathological changes were observed by inner ear celloidin section with haematoxylin-eosin staining and observed under light microscope. According to these results, the AIMD-model animals from non-AIMD-model ones were distinguished. The special antibodies against ICIEAg in sera were measured with ELISA. The antigen-antibody reactions against different components of ICIEAg were detected by Western blotting with sera of AIMD and non-AIMD guinea pigs respectively. Then, we analysed the contrast between them and found the main components of the ICIEAg that were positive reaction in AIMD guinea pigs and negative reaction in non-AIMD guinea pigs. The result of ELISA demonstrated that the sera of both the AIMD and non-AIMD guniea pigs contained the special antibodies against ICIEAg after immunized with ICIEAg. The difference of the amount of antibody against ICIEAg between AIMD guinea pig group and non-AIMD guinea pig group was not significant. Western blotting assay showed only the sera of AIMD guinea pig contained the antibodies against the specific antigens with the molecular of 68 000, 58 000, 42 000 and 28 000. ICIEAg contain many different components, the AIMD might only happen in the guinea pigs in which the special immunization against the main components that could induce this kind of disorder appeared. The inner ear antigens with molecular of 68 000, 58 000, 42 000 and 28 000 might be the main components inducing AIMD in guinea pigs.

  19. Service life monitoring of the main components at the Temelin nuclear power plant

    International Nuclear Information System (INIS)

    Hahn, J.; Vincour, D.

    2007-01-01

    Knowledge and experience gained from the introduction and periodical implementation of life assessment of the major components of the Temelin nuclear power plant is summarized. The initial Soviet technical design of the plant did not incorporate lifetime monitoring and evaluation, therefore it was completed with demonstrative strength and lifetime calculations from Czech companies. Moreover, a Westinghouse primary circuit diagnosis and monitoring system, including the monitoring of temperature and pressure cycles for low-cycle fatigue evaluation, was installed at the plant. The DIALIFE code for the calculation of mainly the low-cycle fatigue of the key pressure components, was developed and installed subsequently as a superstructure to the monitoring system. (author)

  20. Experience with the source evaluation board method of procuring technical components for the Fermilab Main Injector

    International Nuclear Information System (INIS)

    Harding, D.J.; Collins, J.P.; Kobliska, G.R.; Chester, N.S.; Pewitt, E.G.; Fowler, W.B.

    1993-01-01

    Fermilab has adopted the Source Evaluation Board (SEB) method for procuring certain major technical components of the Fermilab Main Injector. The SEB procedure is designed to ensure the efficient and effective expenditure of Government funds at the same time that it optimizes the opportunity for attainment of project objectives. A qualitative trade-off is allowed between price and technical factors. The process involves a large amount of work and is only justified for a very limited number of procurements. Fermilab has gained experience with the SEB process in awarding subcontracts for major subassemblies of the Fermilab Main Injector dipoles

  1. Non-destructive local determination of doping additions and main components in single crystals

    International Nuclear Information System (INIS)

    Ehksperiandova, L.P.; Blank, A.B.; Kukhtina, N.N.; Afanasiadi, L.I.

    1994-01-01

    Procedures for local non-destructive determination of elements in optical and scintillation single crystals are developed. They are applied for determination of the main components (in cadmium tungstate) and doping additions (tellurium in zinc selenide, europium in gadolinium silicate). The metrological characteristics of the developed micro-analysis methods are estimated. Segregation of the main components and doping additions in the objects under consideration are investigated. Tellurium is found to be distributed uniformly on the cross-sections of bulk zinc selenide single crystals. The segregation of europium along gadolinium silicate ingots is almost absent. On the cross-section surface of cadmium tungstate single crystals the microregions are found characterized by the prevailing contents of cadmium or tungsten

  2. A conceptual design of main components sizing for UMT PHEV powertrain

    Science.gov (United States)

    Haezah, M. N.; Norbakyah, J. S.; Atiq, W. H.; Salisa, A. R.

    2015-12-01

    This paper presents a conceptual design of main components sizing for Universiti Malaysia Terengganu plug-in hybrid electric vehicle (UMT PHEV) powertrain. In the design of hybrid vehicles, it is important to identify a proper component sizes. Component sizing significantly affects vehicle performance, fuel economy and emissions. The proposed UMT PHEV has only one electric machine (EM) which functions as either a motor or generator at a time and using batteries and ultracapacitors as an energy storage system (ESS). In this work, firstly, energy and power requirements based on parameters, specifications and performance requirements of vehicle are calculated. Then, the parameters for internal combustion engine, EM and ESS are selected based on the developed Kuala Terengganu drive cycle. The results obtained from this analysis are within reasonable range and satisfactory.

  3. Correlation between magnetic field quality and mechanical components of the Large Hadron Collider main dipoles

    International Nuclear Information System (INIS)

    Bellesia, B.

    2006-12-01

    The 1234 superconducting dipoles of the Large Hadron Collider, working at a cryogenic temperature of 1.9 K, must guarantee a high quality magnetic field to steer the particles inside the beam pipe. Magnetic field measurements are a powerful way to detect assembly faults that could limit magnet performances. The aim of the thesis is the analysis of these measurements performed at room temperature during the production of the dipoles. In a large scale production the ideal situation is that all the magnets produced were identical. However all the components constituting a magnet are produced with certain tolerance and the assembly procedures are optimized during the production; due to these the reality drifts away from the ideal situation. We recollected geometrical data of the main components (superconducting cables, coil copper wedges and austenitic steel coil collars) and coupling them with adequate electro-magnetic models we reconstructed a multipolar field representation of the LHC dipoles defining their critical components and assembling procedures. This thesis is composed of 3 main parts: 1) influence of the geometry and of the assembling procedures of the dipoles on the quality of the magnetic field, 2) the use of measurement performed on the dipoles in the assembling step in order to solve production issues and to understand the behaviour of coils during the assembling step, and 3) a theoretical study of the uncertain harmonic components of the magnetic field in order to assess the dipole production

  4. Correlation between magnetic field quality and mechanical components of the Large Hadron Collider main dipoles

    Energy Technology Data Exchange (ETDEWEB)

    Bellesia, B

    2006-12-15

    The 1234 superconducting dipoles of the Large Hadron Collider, working at a cryogenic temperature of 1.9 K, must guarantee a high quality magnetic field to steer the particles inside the beam pipe. Magnetic field measurements are a powerful way to detect assembly faults that could limit magnet performances. The aim of the thesis is the analysis of these measurements performed at room temperature during the production of the dipoles. In a large scale production the ideal situation is that all the magnets produced were identical. However all the components constituting a magnet are produced with certain tolerance and the assembly procedures are optimized during the production; due to these the reality drifts away from the ideal situation. We recollected geometrical data of the main components (superconducting cables, coil copper wedges and austenitic steel coil collars) and coupling them with adequate electro-magnetic models we reconstructed a multipolar field representation of the LHC dipoles defining their critical components and assembling procedures. This thesis is composed of 3 main parts: 1) influence of the geometry and of the assembling procedures of the dipoles on the quality of the magnetic field, 2) the use of measurement performed on the dipoles in the assembling step in order to solve production issues and to understand the behaviour of coils during the assembling step, and 3) a theoretical study of the uncertain harmonic components of the magnetic field in order to assess the dipole production.

  5. Identification of receptors of main sex-pheromone components of three Lepidopteran species.

    Science.gov (United States)

    Mitsuno, Hidefumi; Sakurai, Takeshi; Murai, Masatoshi; Yasuda, Tetsuya; Kugimiya, Soichi; Ozawa, Rika; Toyohara, Haruhiko; Takabayashi, Junji; Miyoshi, Hideto; Nishioka, Takaaki

    2008-09-01

    Male moths discriminate conspecific female-emitted sex pheromones. Although the chemical components of sex pheromones have been identified in more than 500 moth species, only three components in Bombyx mori and Heliothis virescens have had their receptors identified. Here we report the identification of receptors for the main sex-pheromone components in three moth species, Plutella xylostella, Mythimna separata and Diaphania indica. We cloned putative sex-pheromone receptor genes PxOR1, MsOR1 and DiOR1 from P. xylostella, M. separata and D. indica, respectively. Each of the three genes was exclusively expressed with an Or83b orthologous gene in male olfactory receptor neurons (ORNs) that are surrounded by supporting cells expressing pheromone-binding-protein (PBP) genes. By two-electrode voltage-clamp recording, we tested the ligand specificity of Xenopus oocytes co-expressing PxOR1, MsOR1 or DiOR1 with an OR83b family protein. Among the seven sex-pheromone components of the three moth species, the oocytes dose-dependently responded only to the main sex-pheromone component of the corresponding moth species. In our study, PBPs were not essential for ligand specificity of the receptors. On the phylogenetic tree of insect olfactory receptors, the six sex-pheromone receptors identified in the present and previous studies are grouped in the same subfamily but have no relation with the taxonomy of moths. It is most likely that sex-pheromone receptors have randomly evolved from ancestral sex-pheromone receptors before the speciation of moths and that their ligand specificity was modified by mutations of local amino acid sequences after speciation.

  6. Methodology on ageing management review for main components of a PWR NPP

    International Nuclear Information System (INIS)

    Dou Yikang; He Yinbiao; Xu Xuelian; Zhang Ming; Liang Xingyun

    2005-01-01

    According to the requirements of NNSA, for Chinese operational NPPs periodical safety review (PSR) should be carried out every 10 years. Ageing management is one of the important safety factors to be reviewed. Entrusted by Qinshan Nuclear Power Plant (QNPP), Shanghai Nuclear Engineering Research and Design Institute (SNERDI) carried out the ageing management review (AMR), as a part of the first PSR of QNPP, from 2001 to 2003. This paper summarizes the methodology of the AMR process, including screening of critical components and structures, identification of main ageing mechanisms and their indicators and the tabulated review process, etc. 15 components and structures, hereafter referred as equipment, were selected as review objects based on their significance of safety, replaceability and cost-benefit considerations. To these objects, the main ageing mechanisms and relevant ageing indicators were identified according to specific working and environmental condition, design and manufacture information, operation and maintenance history, etc. The review can be divided into two parallel parts, the review for specific equipment and the review for overall management procedures and their implementation. To typical components, such as RPV and SG, fatigue analysis based on operational transient accounting was carried out to observe the actual safety margins. Through the review, the weaknesses in ageing management and potential threats to structural integrity were identified and thus continued improvement can be made in the next period of 10 years. (authors)

  7. Identification and Hierarchy of Main Electronic Health Record Components in Occupational Medicine

    Directory of Open Access Journals (Sweden)

    Dorin TRIFF

    2010-12-01

    Full Text Available Starting from the legal requirements relating to structuring of medical records in occupational medicine and international requirements regarding the certification of electronic health records we have focused on structuring and then evaluating an EHR model in occupational medicine that integrates the main functions and certification criteria required by the European and US certification bodies. The application we designed, called Medmun, structured for use in occupational medicine practices based on the model of medical file provided by the Romanian legislation, integrates both necessary components of occupational medicine practice for administration of characteristic information related to socio-economic unit, work place, health surveillance as well as components of specific EHR functionality. The application has been submitted for free evaluation by specialist physicians of five counties over a period of nine months and subsequently assessed using a questionnaire on the usefulness of specific functional components in the EHR occupational medicine practice. The model was positively evaluated after experimental employment by occupational health practitioners. They consider that absence of legislative support for EHR implementation in medical practice is the main obstacle to the use of such applications in occupational medicine practice.

  8. [Simultaneous determination of five main index components and specific chromatograms analysis in Xiaochaihu granules].

    Science.gov (United States)

    Zhuang, Yan-Shuang; Cai, Hao; Liu, Xiao; Cai, Bao-Chang

    2012-01-01

    Reversed phase high performance liquid chromatography with diode array detector was employed for simultaneous determination of five main index components and specific chromatograms analysis in Xiaochaihu granules with a linear gradient elution of acetonitrile-water (containing 0.1% phosphoric acid) as mobile phase. The results showed that five main index components (baicalin, baicalein, wogonoside, wogonin, enoxolone) were separated well under the analytical condition. The linear ranges of five components were 0.518 - 16.576, 0.069 - 2.197, 0.167 - 5.333, 0.009 - 0.297 and 0.006 - 0.270 mg x g(-1), respectively. The correlation coefficients were 0.999 9, and the average recoveries ranged from 95% to 105%. Twelve common peaks were selected as the specific chromatograms of Xiaochaihu granules with baicalin as the reference peak. There were good similarities between the reference and the ten batches of samples. The similarity coefficients were no less than 0.9. The analytical method established is highly sensitive with strong specificity and it can be used efficiently in the quality control of Xiaochaihu granules.

  9. Simultaneous quantitative analysis of main components in linderae reflexae radix with one single marker.

    Science.gov (United States)

    Wang, Li-Li; Zhang, Yun-Bin; Sun, Xiao-Ya; Chen, Sui-Qing

    2016-05-08

    Establish a quantitative analysis of multi-components by the single marker (QAMS) method for quality evaluation and validate its feasibilities by the simultaneous quantitative assay of four main components in Linderae Reflexae Radix. Four main components of pinostrobin, pinosylvin, pinocembrin, and 3,5-dihydroxy-2-(1- p -mentheneyl)- trans -stilbene were selected as analytes to evaluate the quality by RP-HPLC coupled with a UV-detector. The method was evaluated by a comparison of the quantitative results between the external standard method and QAMS with a different HPLC system. The results showed that no significant differences were found in the quantitative results of the four contents of Linderae Reflexae Radix determined by the external standard method and QAMS (RSD <3%). The contents of four analytes (pinosylvin, pinocembrin, pinostrobin, and Reflexanbene I) in Linderae Reflexae Radix were determined by the single marker of pinosylvin. This fingerprint was the spectra determined by Shimadzu LC-20AT and Waters e2695 HPLC that were equipped with three different columns.

  10. Dynamic models of reduced order of main components of a M SR

    International Nuclear Information System (INIS)

    Garcia B, F. B.; Morales S, J. B.; Polo L, M. A.; Espinosa P, G.

    2011-11-01

    The reactors of melted salts called Molten Salt Fast Reactor (MSFR), have seen a resurgence of interest in the last decade. This design is one of the six proposed for the IV generation reactors. The most active development was in the middle of 1950 and principles of 1970 in the Oak Ridge National Laboratories (ORNL). In this work the mathematician modeling of the main components in the primary and secondary circuits of a M SR is presented. In particular the dynamics of the heat exchanger is analyzed and they are considered several materials to optimize the system thermodynamically. (Author)

  11. Selenium enrichment on Cordyceps militaris link and analysis on its main active components.

    Science.gov (United States)

    Dong, Jing Z; Lei, C; Ai, Xun R; Wang, Y

    2012-03-01

    To investigate the effects of selenium on the main active components of Cordyceps militaris fruit bodies, selenium-enriched cultivation of C. militaris and the main active components of the fruit bodies were studied. Superoxide dismutase (SOD) activity and contents of cordycepin, cordycepic acid, and organic selenium of fruit bodies were sodium selenite concentration dependent; contents of adenosine and cordycep polysaccharides were significantly enhanced by adding sodium selenite in the substrates, but not proportional to sodium selenite concentrations. In the cultivation of wheat substrate added with 18.0 ppm sodium selenite, SOD activity and contents of cordycepin, cordycepic acid, adenosine, cordycep polysaccharides, and total amino acids were enhanced by 121/145%, 124/74%, 325/520%, 130/284%, 121/145%, and 157/554%, respectively, compared to NS (non-selenium-cultivated) fruit bodies and wild Cordyceps sinensis; organic selenium contents of fruit bodies reached 6.49 mg/100 g. So selenium-enriched cultivation may be a potential way to produce more valuable medicinal food as a substitute for wild C. sinensis.

  12. s-process chronometers

    International Nuclear Information System (INIS)

    Beer, H.

    1983-01-01

    The radionuclei 40 K, 81 Kr, 87 Rb, 93 Zr, 107 Pd, 147 Sm, 176 Lu and 205 Pb are built up totally or partially by the s-process. Due to their long half life they are potential chronometers for the age and the development of the s-process. The usefulness of the various nuclei is discussed. For the determination of the mean age of the s-process synthesis and with it the age of the galaxy, 176 Lu is best suited. It is demonstrated that this age can be calculated solely from measured cross section and abundance ratios. Various effects which can limit the usefulness of 176 Lu as a clock are discussed. (orig.) [de

  13. Chemical composition of Galla chinensis extract and the effect of its main component(s) on the prevention of enamel demineralization in vitro

    NARCIS (Netherlands)

    Huang, X.L.; Liu, M.D.; Li, J.Y.; Zhou, X.D.; ten Cate, J.M.

    2012-01-01

    To determine the chemical composition of Galla chinensis extract (GCE) by several analysis techniques and to compare the efficacy of GCE and its main component(s) in inhibition of enamel demineralization, for the development of future anticaries agents, main organic composition of GCE was

  14. Effect of humates in diet of dairy cows on the raw milk main components

    Directory of Open Access Journals (Sweden)

    Miroslava Potůčková

    2017-01-01

    Full Text Available The effect of supplemental humic substances (HS on the main milk components was investigated. A total of 10 dairy cows (Czech pied cattle, crossbred Czech pied cattle ´ Ayrshire and crossbred Czech pied cattle ´ Red Holstein were tested. Animals were randomly divided into 2 groups, control (C and experimental (E. Animals fed the same feed mixture and group E was additionally supplemented with HS (200 mg.kg-1 of product Humafit prepared from the Sakhalin Leonardite. The experimental period took 3 months. Cows were milked twice a day. The milk composition (lactose, fat, crude protein, pure protein and casein of every cow was monitored on days 0, 14, 28, 42, 56, 70 and 84 of the experiment. Pure protein content was determined by Kjeldahl method, other components were analysed using an infrared analyserMilkoScan FT 120. It was found that the crude protein, pure protein and casein content in milk of group E significantly (p <0.05 increased from the 56th day of the experimental period. Differences of the protein fraction contents in group C and of the dry matter, non-fat dry matter, lactose and fat content in both groups were non-significant (p <0.05.Higher protein and especially casein content in milk could be very important for the cheesemaking as it could increase the cheese yield. Normal 0 21 false false false CS X-NONE X-NONE

  15. Deformation Analysis of the Main Components in a Single Screw Compressor

    Science.gov (United States)

    Liu, Feilong; Liao, Xueli; Feng, Quanke; Van Den Broek, Martijn; De Paepe, Michel

    2015-08-01

    The single screw compressor is used in many fields such as air compression, chemical industry and refrigeration. During operation, different gas pressures and temperatures applied on the components can cause different degrees of deformation, which leads to a difference between the thermally induced clearance and the designed clearance. However, limited research about clearance design is reported. In this paper, a temperature measurement instrument and a convective heat transfer model were described and used to establish the temperature of a single screw air compressor's casing, screw rotor and star wheel. 3-D models of these three main components were built. The gas force deformation, thermal- structure deformation and thermal-force coupling deformation were carried out by using a finite element simulation method. Results show that the clearance between the bottom of the groove and the top of star wheel is reduced by 0.066 mm, the clearance between the side of groove and the star wheel is reduced by 0.015 mm, and the clearance between the cylinder and the rotor is reduced by 0.01 mm. It is suggested that these deformations should be taken into account during the design of these clearances.

  16. Influence of Cements Containing Calcareous Fly Ash as a Main Component Properties of Fresh Cement Mixtures

    Science.gov (United States)

    Gołaszewski, Jacek; Kostrzanowska-Siedlarz, Aleksandra; Ponikiewski, Tomasz; Miera, Patrycja

    2017-10-01

    The main goal of presented research was to examine usability of cements containing calcareous fly ash (W) from technological point of view. In the paper the results of tests concerning the influence of CEM II and CEM IV cements containing fly ash (W) on rheological properties, air content, setting times and plastic shrinkage of mortars are presented and discussed. Moreover, compatibility of plasticizers with cements containing fly ash (W) was also studied. Additionally, setting time and hydration heat of cements containing calcareous fly ash (W) were determined. In a broader aspect, the research contributes to promulgation of the possibility of using calcareous fly ash (W) in cement and concrete technology, what greatly benefits the environment protection (utilization of waste fly ash). Calcareous fly ash can be used successfully as the main component of cement. Cements produced by blending with processed fly ash or cements produced by interginding are characterized by acceptable technological properties. In respect to CEM I cements, cements containing calcareous fly ash worsen workability, decrease air content, delay setting time of mixtures. Cements with calcareous fly ash show good compatibility with plasticizers.

  17. Replacement of heavy components of the Main Primary System (MPS). Recent innovations made by Framatome ANP

    International Nuclear Information System (INIS)

    Chanussot, J.M.; Thevenet, R.

    2006-01-01

    The replacement of heavy components is the result of widespread stress corrosion of Inconel 600 (and alloys 82/182) in the primary system. Following the corrosion of steam generator tubes, which led to the first steam generator replacement (SGR) operations, work has begun on reactor vessel head replacements (RVHR) and pressurizer replacements, pending treatment of the dissimilar butt welds (DBW). The replacement of sections of the Main Primary System is one way of optimizing plant lifetime besides preventing stress corrosion in primary components and combating phenomena as thermal fatigue or certain metallurgical weaknesses. The increase in the number of major operations carried out in the reactor building on PWR and BWR reactor geometries has called for major technical innovations. AREVA, has over the past twenty years carried out more than forty SGRs throughout the world, including the supply of 115 steam generators of all types. This equates to over 60% of all SGR operations performed in Europe and the USA. Today, most SGR operations are performed in the USA, though some still continue in Europe and Asia. Operations have been planned until 2015. The first RVHR operations were carried out in France in 1993, and have been widespread in Europe since 1996 (Spain and Belgium), and in the USA since 2002 (Davis Besse). Since 1993 AREVA, through its subsidiaries Framatome ANP, Jeumont SA and SGT, has performed 72 RVHRs, i.e. most of those carried out in Europe and the USA. Today, RVHR operations take place throughout the world and have been planned until 2014. The first pressurizer replacement took place in the fall of 2005 in Saint Lucie, USA. Others are to follow (Fort Calhoun, Millestone). A significant number of partial or complete pressurizer replacements are now being scheduled. Special focus must be given to this new operation, as a decision is required between the following types of replacements, taking into account the number of pressurizer heaters and the

  18. THE MAIN COMPONENTS OF THE CIVIC EDUCATION IN MODERN SCHOOL (USING THE EXAMPLE OF THE USA

    Directory of Open Access Journals (Sweden)

    Inna Stanislavovna Bessarabova

    2015-11-01

    Full Text Available The urgency of the topic is stipulated by the importance of the problem of civic education under modern conditions of forming of the constitutional state and civic society, which has the rights and freedoms of citizens as the highest value.The purpose of the research is to reveal and characterize the peculiarities of the process of civic education of schoolchildren in modern secondary school (using the example of the USA.The results of the research showed that civic education involves three basic components: civic knowledge, civic skills and civic position. Civic knowledge includes clear understanding of the government structure and the processes of law adoption. At this stage the main focus in the process of civic education is directed to the students’ knowledge and skills to analyze historical and political events in the country, to understand the directions of the state policy in the country. The main function of the civic knowledge is its stimulation of the civic activity.The essential part of civic education is the formation of the civic skills, which are dependent on many factors including home environment, active and responsible participation in political life of the society, general education. These skills are classified as interaction, control and influence.The next basic component of civic education – civic position – is connected with personal and social characteristics of a citizen, which are important for active participation under the conditions of constitutional democracy. Civic position is closely connected with conscious readiness of a person to take part in social activity, availability of the theoretical civic know-ledge and practical civic skills. Itshould be mentioned that civic knowledge, civic skills and civic position are interconnected.Practical implications of the results. The results of the research are applicable in the process of working out of the new technologies, methods and approaches in education to

  19. [Characteristic fingerprint analysis and determination of main components on Andrographis paniculata extract by UPLC].

    Science.gov (United States)

    Zhang, Hui-ye; Xu, Xiao-fei; Huang, Yong; Wamg, De-qin; Deng, Qiao-hua

    2014-06-01

    To establish an analytical method for characteristic fingerprint and determination of main components of Andrographis paniculata Extract by UPLC. The chromatographic conditions were Waters ACQUITY UPLC BEH-C18 (2. 1 mm x 0 mm,1.7 μm)by gradient elute using acetonitrile-water as mobile phase(0 -2 min,20% ~ 25% A;2 ~ 5 min,25% ~ 35% A;5 ~ 7 min,35% A;7 ~10 min,35%~ 55% A) at a flow rate of 0. 5 min/mL,detecting wavelength at 220 nm. Results:Contents of the andrographolide, neoandrographolide, 14-deoxyandrographolide and 14-deoxy-l11,12-didehydroandrographolide had good resolution with the correlation coefficients exceed 0. 9999 and the average percent recovery lied in 97. 2% to 103.9%, RSD was less than 3.0% (n = 6). The chromatograms of Andrographis paniculata Extract shared seven common peaks in which four of them were recognized by reference standard with the similarities over 0. 9. It is a fast,accurate and validated method,and can be useful in quality evaluations of Andrographis paniculata Extract.

  20. A review of Neuropharmacology Effects of Nigella sativa and Its Main Component, Thymoquinone.

    Science.gov (United States)

    Javidi, Soheila; Razavi, Bibi Marjan; Hosseinzadeh, Hossein

    2016-08-01

    Neuropharmacology is the scientific study of drug effect on nervous system. In the last few years, different natural plants and their active constituents have been used in neurological therapy. The availability, lower price, and less toxic effects of herbal medicines compared with synthetic agents make them as simple and excellent choice in the treatment of nervous diseases. Nigella sativa, which belongs to the botanical family of Ranunculaceae, is a widely used medicinal plant all over the world. In traditional and modern medicines several beneficial properties have been attributed to N. sativa and its main component, thymoquinone (TQ). In this review, various studies in scientific databases regarding the neuropharmacological aspects of N. sativa and TQ have been introduced. Results of these studies showed that N. sativa and TQ have several properties including anticonvulsant, antidepressant, anxiolytic, anti-ischemic, analgesic, antipsychotic, and memory enhancer. Furthermore, its protective effects against neurodegenerative diseases such as Alzheimer, Parkinson and multiple sclerosis have been discussed. Although there are many studies indicating the beneficial actions of this plant in nervous system, the number of research projects relating to the human reports is rare. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  1. Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 2: Literature surveys of critical Space Shuttle main engine components

    Science.gov (United States)

    Rajagopal, K. R.

    1992-01-01

    The technical effort and computer code development is summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis. Volume 2 is a summary of critical SSME components.

  2. A network analysis of the Chinese medicine Lianhua-Qingwen formula to identify its main effective components.

    Science.gov (United States)

    Wang, Chun-Hua; Zhong, Yi; Zhang, Yan; Liu, Jin-Ping; Wang, Yue-Fei; Jia, Wei-Na; Wang, Guo-Cai; Li, Zheng; Zhu, Yan; Gao, Xiu-Mei

    2016-02-01

    Chinese medicine is known to treat complex diseases with multiple components and multiple targets. However, the main effective components and their related key targets and functions remain to be identified. Herein, a network analysis method was developed to identify the main effective components and key targets of a Chinese medicine, Lianhua-Qingwen Formula (LQF). The LQF is commonly used for the prevention and treatment of viral influenza in China. It is composed of 11 herbs, gypsum and menthol with 61 compounds being identified in our previous work. In this paper, these 61 candidate compounds were used to find their related targets and construct the predicted-target (PT) network. An influenza-related protein-protein interaction (PPI) network was constructed and integrated with the PT network. Then the compound-effective target (CET) network and compound-ineffective target network (CIT) were extracted, respectively. A novel approach was developed to identify effective components by comparing CET and CIT networks. As a result, 15 main effective components were identified along with 61 corresponding targets. 7 of these main effective components were further experimentally validated to have antivirus efficacy in vitro. The main effective component-target (MECT) network was further constructed with main effective components and their key targets. Gene Ontology (GO) analysis of the MECT network predicted key functions such as NO production being modulated by the LQF. Interestingly, five effective components were experimentally tested and exhibited inhibitory effects on NO production in the LPS induced RAW 264.7 cell. In summary, we have developed a novel approach to identify the main effective components in a Chinese medicine LQF and experimentally validated some of the predictions.

  3. Main components and characteristics of landslide early warning systems operational worldwide

    Science.gov (United States)

    Piciullo, Luca; Cepeda, José

    2017-04-01

    During the last decades the number of victims and economic losses due to natural hazards are dramatically increased worldwide. The reason can be mainly ascribed to climate changes and urbanization in areas exposed at high level of risk. Among the many mitigation measures available for reducing the risk to life related to natural hazards, early warning systems certainly constitute a significant cost-effective option available to the authorities in charge of risk management and governance. The aim is to help and protect populations exposed to natural hazards, reducing fatalities when major events occur. Landslide is one of the natural hazards addressed by early warning systems. Landslide early warning systems (LEWSs) are mainly composed by the following four components: set-up, correlation laws, decisional algorithm and warning management. Within this framework, the set-up includes all the preliminary actions and choices necessary for designing a LEWS, such as: the area covered by the system, the types of landslides and the monitoring instruments. The monitoring phase provides a series of important information on different variables, considered as triggering factors for landslides, in order to define correlation laws and thresholds. Then, a decisional algorithm is necessary for defining the: number of warning levels to be employed in the system, decision making procedures, and everything else system managers may need for issuing warnings in different warning zones. Finally the warning management is composed by: monitoring and warning strategy; communication strategy; emergency plan and, everything connected to the social sphere. Among LEWSs operational worldwide, two categories can be defined as a function of the scale of analysis: "local" and "territorial" systems. The scale of analysis influences several actions and aspects connected to the design and employment of the system, such as: the actors involved, the monitoring systems, type of landslide phenomena

  4. Polysaccharide components from the scape of Musa paradisiaca: main structural features of water-soluble polysaccharide component.

    Science.gov (United States)

    Anjaneyalu, Y V; Jagadish, R L; Raju, T S

    1997-06-01

    Polysaccharide components present in the pseudo-stem (scape) of M. paradisiaca were purified from acetone powder of the scape by delignification followed by extraction with aqueous solvents into water soluble polysaccharide (WSP), EDTA-soluble polysaccharide (EDTA-SP), alkali-soluble polysaccharide (ASP) and alkali-insoluble polysaccharide (AISP) fractions. Sugar compositional analysis showed that WSP and EDTA-SP contained only D-Glc whereas ASP contained D-Glc, L-Ara and D-Xyl in approximately 1:1:10 ratio, respectively, and AISP contained D-Glc, L-Ara and D-Xyl in approximately 10:1:2 ratio, respectively. WSP was further purified by complexation with iso-amylalcohol and characterized by specific rotation, IR spectroscopy, Iodine affinity, ferricyanide number, blue value, hydrolysis with alpha-amylase and glucoamylase, and methylation linkage analysis, and shown to be a amylopectin type alpha-D-glucan.

  5. Electrical and non-electrical environment of wind turbine main components

    DEFF Research Database (Denmark)

    Holboell, J.; Henriksen, M.; Olsen, R.S.

    of the electrical components or even lead to catastrophic component failure. In the present paper, results are presented from investigations on existing standards which give detailed descriptions of the environmental and operational conditions of wind turbine components. It is found that there is currently a lack...... of application standards for wind turbine electrical equipment. Component-level environmental requirements as given in equipment-specific standards are compared with the environment described in the IEC's 61400 series concerning wind turbines. Based on methods defined in IEC 60721, the non-electrical environment...... of wind turbine is described by means of specific classes. In the paper, new class combinations are suggested covering the different operating conditions the components are exposed to. The class combinations include factors of climatic, mechanical and chemical character. The factors occur in different...

  6. Company Slogan and a Vivid Image of a Trademark - as Main Components of a Strong Brand

    Directory of Open Access Journals (Sweden)

    Igor BELOSTECINIC

    2015-12-01

    Full Text Available Among other methods, good brand managers always affect clients and strengthen their fidelity to the brand by means of company advertising slogans and vivid images associated with this brand. Slogans may function as useful “levers” or “hooks” helping clients to understand the essence of a trademark and its peculiarity, as well as to nail in clients' minds the established image of a strong brand. One of the “hooks” attracting attention to brand and helping to nail it in a common man's mind – is a company (advertising slogan - short message or motto, which actively presents the key theme of the brand in general or of a certain advertising campaign, and contains substantial information, reflecting the essence of campaign's or product's marketing offer. One must admit that it is nice to recall favorite philosopher's aphorisms or sayings while getting up in the morning, and to whistle an aria from a renowned opera on your way to work. However, more often people sing unsophisticated verses about the “sign of a good taste” and get annoyed by a trivial call to “have a break” going round in their heads. This means that the advertisement of popular chocolate bars and drinks has hit its target. The main lever for success in generation of a positive and recognizable brand image - is the slogan and its graphic image in consumer's mind. Together with other brand components (logo, corporate colors, sound or music image a slogan generates the system of constant elements which ensure the brand's internal unity and are aimed at creation of exposure effect. To some extent, we all are “ad eaters” and are always capable of estimating an ad, even if it is at the level of feelings: whether we like it or not. So why a certain advertisement can make us smile, elicit good feelings and cause an urge to buy product/service that is being advertised, and another one - evokes disappointment and annoyance? The answer is obvious: the first one was

  7. The MainSTREAM Component Platform: A Holistic Approach to Microfluidic System Design

    DEFF Research Database (Denmark)

    Sabourin, David; Skafte-Pedersen, Peder; Søe, Martin Jensen

    2013-01-01

    A microfluidic component library for building systems driving parallel or serial microfluidic-based assays is presented. The components are a miniaturized eight-channel peristaltic pump, an eight-channel valve, sample-to-waste liquid management, and interconnections. The library of components...... of reaction chips; (2) highly parallel pumping and routing/valving capability; (3) methods to interface pumps and chip-to-liquid management systems; (4) means to construct a portable system; (5) reconfigurability/flexibility in system design; (6) means to interface to microscopes; and (7) compatibility...

  8. Fault diagnosis of main coolant pump in the nuclear power station based on the principal component analysis

    International Nuclear Information System (INIS)

    Feng Junting; Xu Mi; Wang Guizeng

    2003-01-01

    The fault diagnosis method based on principal component analysis is studied. The fault character direction storeroom of fifteen parameters abnormity is built in the simulation for the main coolant pump of nuclear power station. The measuring data are analyzed, and the results show that it is feasible for the fault diagnosis system of main coolant pump in the nuclear power station

  9. Procedures for the design of the main mechanical components of a wind system; Dimensionamento dos componentes mecanicos principais de aerogeradores

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, M.H.; Marco Filho, F. de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    1990-12-31

    Procedures for the design of the main mechanical components of a wind system were developed. One of the main concerns was related to the possibility of its use in small micro-computers. This goal was reached and an APPLE II computer was used. The resulting algorithm permits a friendly interaction between man and machine. 5 refs., 12 figs

  10. Identification of the main thermal characteristics of building components using MATLAB

    DEFF Research Database (Denmark)

    Jimenez, M.J.; Madsen, Henrik; Andersen, Klaus Kaae

    2008-01-01

    This paper presents the application of the IDENT Graphical User Interface of MATLAB to estimate the thermal properties of building components from outdoor dynamic testing, imposing appropriate physical constraints and assuming linear and time invariant parametric models. The theory is briefly...

  11. Biocidal effects of Piper hispidinervum (Piperaceae) essential oil and synergism among its main components.

    Science.gov (United States)

    Andrés, M F; Rossa, G E; Cassel, E; Vargas, R M F; Santana, O; Díaz, C E; González-Coloma, A

    2017-11-01

    In this study we evaluated the effect of a pressure gradient (1-2 atm) in the extraction and composition of the essential oil (EO) of Piper hispidinervum by steam distillation. We also evaluated the insect antifeedant effects (Spodoptera littoralis, Leptinotarsa decemlineata, Myzus persicae and Rhopalosiphum padi) and nematicidal activity (Meloidogyne javanica) of the oils, their major components and their synergistic interactions. Safrole was the major component (78-81%) followed by terpinolene (5-9%). The EOs tested were effective insect antifeedants. Safrole, explained most of the insect antifeedant action of P. hispidinervum EOs. When safrole and terpinolene were tested in binary combinations, low ratios of safrole improved the antifeedant effects of terpinolene. P. hispidinervum EOs caused higher mortality of M. javanica juveniles than their major components. In binary combinations, low ratios of terpinolene increased the nematicidal effects of safrole. The EO treatment strongly suppressed nematode egg hatching and juvenile infectivity. P. hispidinervum EOs affected the germination of S. lycopersicum and L. sativa mostly at 24 h of treatment, being L. sativa the most sensitive. Safrole moderately affected germination and root growth of L. sativa, S. lycopersicum and L. perenne. Terpinolene only affected S. lycopersicum root growth. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Main features of the pressurized component life management related R and D activity in Hungary

    International Nuclear Information System (INIS)

    Gillemot, F.; Oszwald, F.

    1995-01-01

    During the last one and half years the following main developments related to the life-time management of the NPP units took place in Hungary: 1. National project named AGNES (Advanced General New Evaluation of Safety) finished. 2. The first results of the extended surveillance program of NPP Paks has been measured. 3. The upgraded ultrasonic testing equipment used for RPV outside testing, and nozzle testing is regularly used in refuelling periods. 4. Radiation embrittlement and thermal ageing research started on RPV materials, mainly on cladding. 5. Participation in the development of the IAEA RPV ageing database. 6. Participation in IAEA pilot studies on ageing. 7. Operation of the Budapest Research Reactor, and building a new high capacity helium cooled irradiation rig. 8. Nondestructive evaluation of material ageing of a steam generator vessels. 9. A life-time calculation of Paks RPV-s. This report is a short survey of these developments. 19 refs, 4 figs

  13. A 2 MW, 170 GHz coaxial cavity gyrotron - experimental verification of the design of main components

    Energy Technology Data Exchange (ETDEWEB)

    Piosczyk, B [Forschungszentrum Karlsruhe, Association EURATOM-FZK, Institut fuer Hochleistungsimpuls- und Mikrowellentechnik (IHM), Postfach 3640, D-76021 Karlsruhe (Germany); Dammertz, G [Forschungszentrum Karlsruhe, Association EURATOM-FZK, Institut fuer Hochleistungsimpuls- und Mikrowellentechnik (IHM), Postfach 3640, D-76021 Karlsruhe (Germany); Dumbrajs, O [Department of Engineering Physics and Mathematics, Helsinki University of Technology, Association EURATOM-TEKES, FIN-02150 Espoo (Finland)] (and others)

    2005-01-01

    A 2 MW, CW, 170 GHz coaxial cavity gyrotron is under development in cooperation between European Research Institutions (FZK Karlsruhe, CRPP Lausanne, HUT Helsinki) and the European tube industry (TED, Velizy, France). The design of critical components has recently been examined experimentally at FZK Karlsruhe with a short pulse ({approx} few ms) coaxial cavity gyrotron. This gyrotron uses the same cavity and the same quasioptical (q.o.) RF-output system as designed for the industrial prototype and a very similar electron gun.

  14. Strategic cost management as the main component of strategic management accounting

    OpenAIRE

    Ходзицька, Валентина Василівна

    2013-01-01

    The influence of cost management on making management decisions and functioning of the system of strategic management accounting was analyzed in the paper. The main aspects of the influence of strategic management accounting on making effective management decisions in the system of integrated management of business entities were highlighted. The scope of the organizational activity, covered by the strategic management accounting was described.The paper shows the orientation of strategic manag...

  15. [Productivity costs of rheumatoid arthritis in Germany. Cost composition and prediction of main cost components].

    Science.gov (United States)

    Merkesdal, S; Huelsemann, J L; Mittendorf, T; Zeh, S; Zeidler, H; Ruof, J

    2006-10-01

    Identification of predictors for the productivity cost components: (1) sick leave, and (2) work disability in gainfully employed and (3) impaired household productivity in unemployed patients with rheumatoid arthritis (RA) from the societal perspective. Investigation of productivity costs was linked to a multicenter, randomized, controlled trial evaluating the effectiveness of clinical quality management in 338 patients with RA. The productivity losses were assessed according to the German Guidelines on Health Economic Evaluation. By means of multivariate logistic regression analyses, predictors of sick leave, work disability (employed patients, n=96), and for days confined to bed in unemployed patient (n=242) were determined. Mean annual costs of 970 EUR arose per person taking into consideration all patients (453 EUR sick leave, 63 EUR work disability, 454 EUR impaired productivity of unemployed patients). Disease activity, disease severity, and impaired physical function were global predictors for all of the cost components investigated. Sick leave costs were predicted by prior sick leave periods and the vocational status blue collar worker, work disability costs by sociodemographic variables (marital status, schooling), and the productivity costs of unemployed patients by impaired mental health and impaired physical functions. Interventions such as reduction in disease progression and control of disease activity, early vocational rehabilitation measures and vocational retraining in patients at risk of quitting working life, and self-management programs to learn coping strategies might decrease future RA-related productivity costs.

  16. Diagnosis of the Main Busbar II Panel Components Ageing of RSG-GAS Electrical System by Using Infrared Thermography

    International Nuclear Information System (INIS)

    Teguh Sulistyo; Kiswanto; Roziq Himawan; Ari Satmoko

    2007-01-01

    To support the operation of RSG-GAS safely, the diagnosis of the ageing of main busbar II BHD/BHE/BHF panel components of RSG-GAS electrical system have been done. By using infrared thermography type Thermo Tracer TH9100PM VI/PW VI. The results of the diagnosis showed that some of the components under degradation with various rate. It can cause the system failure. By understanding the components ageing degradation mechanism and performing the preventive and predictive maintenance and safety of RSG-GAS electrical system earlier, the possibility of accident can be avoided. (author)

  17. Identifying and quantifying main components of physiological noise in functional near infrared spectroscopy on prefrontal cortex

    Directory of Open Access Journals (Sweden)

    Evgeniya eKirilina

    2013-12-01

    Full Text Available Functional Near-Infrared Spectroscopy (fNIRS is a promising method to study functional organization of the prefrontal cortex. However, in order to realize the high potential of fNIRS, effective discrimination between physiological noise originating from forehead skin haemodynamic and cerebral signals is required. Main sources of physiological noise are global and local blood flow regulation processes on multiple time scales. The goal of the present study was to identify the main physiological noise contributions in fNIRS forehead signals and to develop a method for physiological de-noising of fNIRS data. To achieve this goal we combined concurrent time-domain fNIRS and peripheral physiology recordings with wavelet coherence analysis. Depth selectivity was achieved by analyzing moments of photon time-of-flight distributions provided by time-domain fNIRS. Simultaneously, mean arterial blood pressure (MAP, heart rate (HR, and skin blood flow (SBF on the forehead were recorded. Wavelet coherence analysis was employed to quantify the impact of physiological processes on fNIRS signals separately for different time scales. We identified three main processes contributing to physiological noise in fNIRS signals on the forehead. The first process with the period of about 3 s is induced by respiration. The second process is highly correlated with time lagged MAP and HR fluctuations with a period of about 10 s often referred as Mayer waves. The third process is local regulation of the facial skin blood flow time locked to the task-evoked fNIRS signals. All processes affect oxygenated haemoglobin concentration more strongly than that of deoxygenated haemoglobin. Based on these results we developed a set of physiological regressors, which were used for physiological de-noising of fNIRS signals. Our results demonstrate that proposed de-noising method can significantly improve the sensitivity of fNIRS to cerebral signals.

  18. A Main Ring bunch length monitor by detecting two frequency components of the beam

    International Nuclear Information System (INIS)

    Ieiri, T.; Jackson, G.

    1989-01-01

    The bunch length is measured by detecting two revolution frequency harmonics of the beam and taking the ratio of their amplitudes. Two heterodyne receivers have been made to direct them, one at 53MHz and the other at 159MHz. These signals are picked-up by a stripline detector. An analog circuit provides a signal proportional to the bunch length. The monitor measures variation of the bunch length as a function of time in the Main Ring. The measured signal, which sometimes shows that the bunches are tumbling in phase space, can be damped by feedback to the RF amplitude modulator. 9 refs., 12 figs., 1 tab

  19. Main error sources in sorbtion technique and plasma electron component parameter definition by continuous X radiation

    International Nuclear Information System (INIS)

    Gavrilov, V.V.; Torokhova, N.V.; Fasakhov, I.K.

    1986-01-01

    Recombination radiation effect on the relation of signals behind the filters depending on the plasma temperature(sorption method for T determination) is demonstrated. This factor produces the main effect on the method accuracy (100-400%), the other factors analysed in combination make an error in temperature at the level of 50%. Method of plasma electron distribution function reconstruction by continuous x-radiation spectrum, based on the correctness (under certain limitations for the required function) of the equation, linking the electron distribution function with bremmsstrahlung spectral density is presented

  20. THE ECONOMETRICS OF THE FORECASTING OF FINANCIAL RESOURCES, A MAIN COMPONENT OF THE FINANCIAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    2009-05-01

    Full Text Available The paper intends to emphasise the importance of budget resources forecasting for long periods of time, within thefinancial management. An as accurate as possible forecasting of the volume of financial resources will represent the basis forthe future projections of the expenditure of local communities, as they are regulated by law, knowing that one of the principlesrepresenting the basis of budget making is that of the balanced budget. To the same extent, the volume of the budget liquiditieswill depend on the rigorousness of the design of the volume of financial resources.. Beyond the abstract character of themathematic calculus made by specialists in econometrics, the financial manager is also interested to know the forecastingtechniques so that he/she can draw up the income and expenditure budget, the basis for the implementation of the economicsocialdevelopment strategies of the local communities. The financial management remains a fundamental component of thepublic management through the theoretical-methodological arsenal made available for the loan officer.

  1. [Main Components of Xinjiang Lavender Essential Oil Determined by Partial Least Squares and Near Infrared Spectroscopy].

    Science.gov (United States)

    Liao, Xiang; Wang, Qing; Fu, Ji-hong; Tang, Jun

    2015-09-01

    components were 8 in the model. The performance of the model was evaluated according to root mean square error of cross-validation (RMSECV), root mean square error of prediction (RMSEP). In the model, RESECV of linalool and linalyl acetate were 0.170 and 0.416, respectively; RM-SEP were 0.188 and 0.364. The results indicated that raw data was pretreated by OSC and FiPLS, the NIR-PLS quantitative analysis model with good robustness, high measurement precision; it could quickly determine the content of linalool and linalyl acetate in lavender essential oil. In addition, the model has a favorable prediction ability. The study also provide a new effective method which could rapid quantitative analysis the major components of Xinjiang lavender essential oil.

  2. Structural mechanics research and development for main components of chinese 300 MWe PWR NPPs: from design to life management

    International Nuclear Information System (INIS)

    Yao Weida; Dou Yikang; Xie Yongcheng; He Yinbiao; Zhang Ming; Liang Xingyun

    2005-01-01

    Qinshan Nuclear Power Plant (Unit I), is a 300 MWe prototype PWR independently developed by Chinese own efforts, from design, manufacture, construction, installation, commissioning, to operation, inspection, maintenance, ageing management and lifetime assessment. Shanghai Nuclear Engineering Research and Design Institute (SNERDI) has taken up with and involved in deeply the R and D to tackle problems of this type of reactor since very beginning in early 1970s. Structural mechanics is one of the important aspects to ensure the safety and reliability for NPP components. This paper makes a summary on role of structural mechanics for component safety and reliability assessment in different stages of design, commissioning, operation, as well as lifetime assessment on this type PWR NPPs, including Qinshan-I and Chashma-I, a sister plant in Pakistan designed by SNERDI. The main contents of the paper cover design by analysis for key components of NSSS; mechanical problems relating to safety analysis; special problems relating to pressure retaining components, such as fracture mechanics, sealing analysis and its test verifications, etc.; experimental research on flow-induced vibration; seismic qualification for components; component failure diagnosis and root cause analysis; vibration qualification and diagnosis technique; component online monitoring technique; development of defect assessment; methodology of aging management and lifetime assessment for key components of NPPs, etc. (authors)

  3. Product policy - the main component of the marketing mix in the Romanian health services.

    Science.gov (United States)

    Coculescu, B I; Purcarea, V L; Coculescu, E C

    2016-01-01

    The objectives of the reforms in the EU healthcare systems are based on the implementation of the marketing concept in the health systems, which are, among other things: • efficient management of the financial resources and control costs of the rendered health services; • increased satisfaction of the clients of health care services; • broad accessibility to health services; • effective implementation of modern technologies; • rational stimulation of medical services consumption; • achievement of a fair and neutral competition between the public/ private providers and health insurance companies; • introduction of performance criteria in order to increase the incomes of the medical staff and hierarchy in hospitals; • implementation of modern management methods in health services management; • decentralization of the public healthcare system. Product policy in the medical system of healthcare - the most important component of the marketing mix - is the attitude that addresses a medical organization to the volume, structure, and diversity of services subject to their own activities in relation to the requirements of the services market and the competitive actions of other medical institutions.

  4. Antiamoebic Activity of Petiveria alliacea Leaves and Their Main Component, Isoarborinol.

    Science.gov (United States)

    Zavala Ocampo, Lizeth M; Aguirre-HernÁndez, Eva; Pérez-HernÁndez, Nury; Rivera, Gildardo; Marchat, Laurence A; Ramírez-Moreno, Esther

    2017-08-28

    Petiveria alliacea L. (Phytolacaceae) is a medicinal plant with a broad range of traditional therapeutic properties, including the treatment of dysentery and intestinal infections caused by protozoan parasites. However, its effects against Entamoeba histolytica have not been reported yet. We investigated the antiamoebic activity present in the leaves of P. alliacea Antiamoebic activity was evaluated in methanolic and aqueous extracts, as well as in the hexanic, methanolic, and EtOAc fractions. The P. alliacea methanolic extract showed a better antiamoebic activity than the aqueous extract with an IC 50 = 0.51 mg/ml. Likewise, the hexanic fraction was the most effective fraction, showing a dose-dependent activity against E. histolytica , with an IC 50 = 0.68 mg/ml. Hexanic subfraction 12-19 showed the highest antiamoebic activity at 0.8 mg/ml, producing 74.3% growth inhibition without any toxicity in mammal cells. A major component in subfraction 12-19 was identified as isoarborinol, which produced 51.4% E. histolytica growth inhibition at 0.05 mg/ml without affecting mammal cells. The P. alliacea leaf extract has antiamoebic activity that can be attributed to a major metabolite known as isoarborinol.

  5. Tungsten: An option for divertor and main chamber plasma facing components in future fusion devices

    International Nuclear Information System (INIS)

    Neu, R.; Dux, R.; Kallenbach, A.; Maggi, C.F.; Puetterich, T.; Balden, M.; Eich, T.; Fuchs, J.C.; Gruber, O.; Herrmann, A.; Maier, H.; Mueller, H.W.; Pugno, R.; Radivojevic, I.; Rohde, V.; Sips, A.C.C.; Suttrop, W.; Ye, M.Y.; O'Mullane, M.; Whiteford, A.

    2005-01-01

    The tungsten programme in ASDEX Upgrade is pursued towards a full high-Z device. The spectroscopic diagnostic and the cooling factor of W have been extended and refined. The W-coated surfaces represent now a fraction of 65% (24.8 m2). The only two major components which are not yet coated are the strikepoint region of the lower divertor as well as the limiters at the low field side. While extending the W surfaces, the W concentration and the discharge behaviour have changed gradually pointing to critical issues when operating with a W wall: anomalous transport in the plasma centre should not be too low, otherwise neoclassical accumulation can occur. A very successful remedy is the addition of central RF heating at the 20-30% level. Regimes with low ELM activity show increased impurity concentration over the whole plasma radius. These discharges can be cured by increasing the ELM frequency through pellet ELM pacemaking or by higher heating power. Moderate gas puffing also mitigates the impurity influx and penetration, however at the expense of lower confinement. The erosion yield at the low field side guard limiter can be as high as 10 -3 and fast particle losses from NBI were identified to contribute a significant part to the W sputtering. Discharges run in the upper, W coated divertor do not show higher W concentrations than comparable discharges in the lower C-based divertor. (author)

  6. A Monte Carlo study of Weibull reliability analysis for space shuttle main engine components

    Science.gov (United States)

    Abernethy, K.

    1986-01-01

    The incorporation of a number of additional capabilities into an existing Weibull analysis computer program and the results of Monte Carlo computer simulation study to evaluate the usefulness of the Weibull methods using samples with a very small number of failures and extensive censoring are discussed. Since the censoring mechanism inherent in the Space Shuttle Main Engine (SSME) data is hard to analyze, it was decided to use a random censoring model, generating censoring times from a uniform probability distribution. Some of the statistical techniques and computer programs that are used in the SSME Weibull analysis are described. The methods documented in were supplemented by adding computer calculations of approximate (using iteractive methods) confidence intervals for several parameters of interest. These calculations are based on a likelihood ratio statistic which is asymptotically a chisquared statistic with one degree of freedom. The assumptions built into the computer simulations are described. The simulation program and the techniques used in it are described there also. Simulation results are tabulated for various combinations of Weibull shape parameters and the numbers of failures in the samples.

  7. Trend and pattern analysis of failures of main feedwater system components in United States commercial nuclear power plants

    International Nuclear Information System (INIS)

    Gentillon, C.D.; Meachum, T.R.; Brady, B.M.

    1987-01-01

    The goal of the trend and pattern analysis of MFW (main feedwater) component failure data is to identify component attributes that are associated with relatively high incidences of failure. Manufacturer, valve type, and pump rotational speed are examples of component attributes under study; in addition, the pattern of failures among NPP units is studied. A series of statistical methods is applied to identify trends and patterns in failures and trends in occurrences in time with regard to these component attributes or variables. This process is followed by an engineering evaluation of the statistical results. In the remainder of this paper, the characteristics of the NPRDS that facilitate its use in reliability and risk studies are highlighted, the analysis methods are briefly described, and the lessons learned thus far for improving MFW system availability and reliability are summarized (orig./GL)

  8. Screening for main components associated with the idiosyncratic hepatotoxicity of a tonic herb, Polygonum multiflorum.

    Science.gov (United States)

    Li, Chunyu; Niu, Ming; Bai, Zhaofang; Zhang, Congen; Zhao, Yanling; Li, Ruiyu; Tu, Can; Li, Huifang; Jing, Jing; Meng, Yakun; Ma, Zhijie; Feng, Wuwen; Tang, Jinfa; Zhu, Yun; Li, Jinjie; Shang, Xiaoya; Zou, Zhengsheng; Xiao, Xiaohe; Wang, Jiabo

    2017-06-01

    The main constituents of a typical medicinal herb, Polygonum multiflorum (Heshouwu in Chinese), that induces idiosyncratic liver injury remain unclear. Our previous work has shown that cotreatment with a nontoxic dose of lipopolysaccharide (LPS) and therapeutic dose of Heshouwu can induce liver injury in rats, whereas the solo treatment cannot induce observable injury. In the present work, using the constituent "knock-out" and "knock-in" strategy, we found that the ethyl acetate (EA) extract of Heshouwu displayed comparable idiosyncratic hepatotoxicity to the whole extract in LPS-treated rats. Results indicated a significant elevation of plasma alanine aminotransferase, aspartate aminotransferase, and liver histologic changes, whereas other separated fractions failed to induce liver injury. The mixture of EA extract with other separated fractions induced comparable idiosyncratic hepatotoxicity to the whole extract in LPS-treated rats. Chemical analysis further revealed that 2,3,5,4'-tetrahydroxy trans-stilbene-2-O-β-glucoside (trans-SG) and its cis-isomer were the two major compounds in EA extract. Furthermore, the isolated cis-, and not its trans-isomer, displayed comparable idiosyncratic hepatotoxicity to EA extract in LPS-treated rats. Higher contents of cis-SG were detected in Heshouwu liquor or preparations from actual liver intoxication patients associated with Heshouwu compared with general collected samples. In addition, plasma metabolomics analysis showed that cis-SG-disturbing enriched pathways remarkably differed from trans-SG ones in LPS-treated rats. All these results suggested that cis-SG was closely associated with the idiosyncratic hepatotoxicity of Heshouwu. Considering that the cis-trans isomerization of trans-SG was mediated by ultraviolet light or sunlight, our findings serve as reference for controlling photoisomerization in drug discovery and for the clinical use of Heshouwu and stilbene-related medications.

  9. Analysis of the main components of the aguamiel produced by the maguey-pulquero (Agave mapisaga) throughout the harvest period.

    Science.gov (United States)

    Ortiz-Basurto, Rosa Isela; Pourcelly, Gérald; Doco, Thierry; Williams, Pascale; Dornier, Manuel; Belleville, Marie-Pierre

    2008-05-28

    The main characteristics of the aguamiel (maguey-pulquero sap) during the harvest period of the Agave mapisaga plants were assessed to establish its stability through time and the industrial potential of its components. Only minor differences in aguamiel composition were detected among samples collected at different time points of the harvest period. The aguamiel analyzed contained 11.5 wt % of dry matter, which was composed mainly of sugars (75 wt %). Among these sugars, 10 wt % were fructo-oligosaccharides (FOS), which are known to be important in the food industry for their prebiotic properties. Other components include 0.3 wt % of free amino acids (with most essential amino acids and four neurotransmitters: GABA, GLY, GLX, and ASX), 3 wt % of proteins, and 3 wt % of ashes.

  10. The permeability characteristics and interaction of main components from Si-Ni-San in a MDCK epithelial cell monolayer model.

    Science.gov (United States)

    Chen, Ruonan; Shen, Chenlin; Xu, Qingqing; Liu, Yaru; Li, Bo; Huang, Cheng; Ma, Taotao; Meng, Xiaoming; Wu, Maomao; Li, Jun

    2017-07-26

    1. Si-Ni-San (SNS) possesses extensive therapeutic effects, however, the extent to which main components are absorbed and the mechanisms involved are controversial. 2. In this study, MDCK cell model was used to determine the permeability characteristics and interaction between the major components of Si-Ni-San, including saikosaponin a, paeoniflorin, naringin and glycyrrhizic acid. 3. The transport of the major components was concentration-dependent in both directions. Moreover, the transport of paeoniflorin, naringin and glycyrrhizic acid was significantly reduced at 4°C or in the presence of NaN3. Additionally, the efflux of paeoniflorin and naringin were apparently reduced in the presence of P-gp inhibitor verapamil. The transport of glycyrrhizic acid was clearly inhibited by the inhibitors of MRP2, indicating that MRP2 may be involved in the transport of glycyrrhizic acid. However, the results indicated that saikosaponin a was absorbed mainly by passive diffusion. Furthermore, the combined incubation of four major components had a powerful sorbefacient effect than a single drug used alone which may be regulated by tight junctions. 4. Taken together, our study provides useful information for pharmacological applications of Si-Ni-San and offers new insights into this ancient decoction for further researches, especially in drug synergism.

  11. Specialized data analysis for the Space Shuttle Main Engine and diagnostic evaluation of advanced propulsion system components

    Science.gov (United States)

    1993-01-01

    The Marshall Space Flight Center is responsible for the development and management of advanced launch vehicle propulsion systems, including the Space Shuttle Main Engine (SSME), which is presently operational, and the Space Transportation Main Engine (STME) under development. The SSME's provide high performance within stringent constraints on size, weight, and reliability. Based on operational experience, continuous design improvement is in progress to enhance system durability and reliability. Specialized data analysis and interpretation is required in support of SSME and advanced propulsion system diagnostic evaluations. Comprehensive evaluation of the dynamic measurements obtained from test and flight operations is necessary to provide timely assessment of the vibrational characteristics indicating the operational status of turbomachinery and other critical engine components. Efficient performance of this effort is critical due to the significant impact of dynamic evaluation results on ground test and launch schedules, and requires direct familiarity with SSME and derivative systems, test data acquisition, and diagnostic software. Detailed analysis and evaluation of dynamic measurements obtained during SSME and advanced system ground test and flight operations was performed including analytical/statistical assessment of component dynamic behavior, and the development and implementation of analytical/statistical models to efficiently define nominal component dynamic characteristics, detect anomalous behavior, and assess machinery operational condition. In addition, the SSME and J-2 data will be applied to develop vibroacoustic environments for advanced propulsion system components, as required. This study will provide timely assessment of engine component operational status, identify probable causes of malfunction, and indicate feasible engineering solutions. This contract will be performed through accomplishment of negotiated task orders.

  12. [Multiple analysis of the difference in intestinal absorption between the main components and the extract of Glycyrrhiza uralensis].

    Science.gov (United States)

    Wu, Qing-Qing; Chen, Yan; Xin, Ran; Wang, Jin-Yan; Zhou, Lei; Yuan, Ling; Jia, Xiao-Bin

    2012-05-01

    The aim of this study is to investigate the rat intestinal absorption behavior of two main active components, liquiritin, glycyrrhizin and the extract of Glycyrrhiza uralensis. The rat intestinal perfusion model was employed. Concentrations of the compounds of the interest in the intestinal perfusate, bile and plasma samples were determined by HPLC and UPLC. At the same time, the intestinal enzymes incubation test and the partition coefficient determination, the absorption of liquiritin and glycyrrhizin alone and the extract were multiple analyzed. The results showed that the P(eff) (effective permeability) of liquiritin or glycyrrhizin alone or the extract was less than 0.3, which suggested their poor absorption in the intestine. The P(eff) of the two main active components or the extract was not significantly different in duodenum, jejunum, colon and ileum segment. The P(eff) of the glycyrrhizin in the extract had no significant difference in the four intestinal segments compared with the glycyrrhizin alone. The absorption of the liquiritin displayed significant difference (P components might not increase the amount of liquiritin and glycyrrhizin in the bile and plasma within the duration of the test.

  13. A sensitivity study of s-process: the impact of uncertainties from nuclear reaction rates

    Science.gov (United States)

    Vinyoles, N.; Serenelli, A.

    2016-01-01

    The slow neutron capture process (s-process) is responsible for the production of about half the elements beyond the Fe-peak. The production sites and the conditions under which the different components of s-process occur are relatively well established. A detailed quantitative understanding of s-process nucleosynthesis may yield light in physical processes, e.g. convection and mixing, taking place in the production sites. For this, it is important that the impact of uncertainties in the nuclear physics is well understood. In this work we perform a study of the sensitivity of s-process nucleosynthesis, with particular emphasis in the main component, on the nuclear reaction rates. Our aims are: to quantify the current uncertainties in the production factors of s-process elements originating from nuclear physics and, to identify key nuclear reactions that require more precise experimental determinations. In this work we studied two different production sites in which s-process occurs with very different neutron exposures: 1) a low-mass extremely metal-poor star during the He-core flash (nn reaching up to values of ∼ 1014cm-3); 2) the TP-AGB phase of a M⊙, Z=0.01 model, the typical site of the main s-process component (nn up to 108 — 109cm-3). In the first case, the main variation in the production of s-process elements comes from the neutron poisons and with relative variations around 30%-50%. In the second, the neutron poison are not as important because of the higher metallicity of the star that actually acts as a seed and therefore, the final error of the abundances are much lower around 10%-25%.

  14. Total annoyance from an industrial noise source with a main spectral component combined with a background noise.

    Science.gov (United States)

    Alayrac, M; Marquis-Favre, C; Viollon, S

    2011-07-01

    When living close to an industrial plant, people are exposed to a combination of industrial noise sources and a background noise composed of all the other noise sources in the environment. As a first step, noise annoyance indicators in laboratory conditions are proposed for a single exposure to an industrial noise source. The second step detailed in this paper involves determining total annoyance indicators in laboratory conditions for ambient noises composed of an industrial noise source and a background noise. Two types of steady and permanent industrial noise sources are studied: low frequency noises with a main spectral component at 100 Hz, and noises with a main spectral component in middle frequencies. Five background noises are assessed so as to take into account different sound environments which can usually be heard by people living around an industrial plant. One main conclusion of this study is that two different analyses are necessary to determine total annoyance indicators for this type of ambient noise, depending on the industrial noise source composing it. Therefore, two total annoyance indicators adapted to the ambient noises studied are proposed. © 2011 Acoustical Society of America

  15. Vimang (Mangifera indica L. extract) induces permeability transition in isolated mitochondria, closely reproducing the effect of mangiferin, Vimang's main component.

    Science.gov (United States)

    Pardo-Andreu, Gilberto L; Dorta, Daniel Junqueira; Delgado, René; Cavalheiro, Renata A; Santos, Antonio C; Vercesi, Anibal E; Curti, Carlos

    2006-02-01

    Mitochondrial permeability transition (MPT) is a Ca(2+)-dependent, cyclosporin A (CsA)-sensitive, non-selective inner membrane permeabilization process. It is often associated with apoptotic cell death, and is induced by a wide range of agents or conditions, usually involving reactive oxygen species (ROS). In this study, we demonstrated that Mangifera indica L. extract (Vimang), in the presence of 20 microM Ca(2+), induces MPT in isolated rat liver mitochondria, assessed as CsA-sensitive mitochondrial swelling, closely reproducing the same effect of mangiferin, the main component of the extract, as well as MPT-linked processes like oxidation of membrane protein thiols, mitochondrial membrane potential dissipation and Ca(2+) release from organelles. The flavonoid catechin, the second main component of Vimang, also induces MPT, although to a lesser extent; the minor, but still representative Vimang extract components, gallic and benzoic acids, show respectively, low and high MPT inducing abilities. Nevertheless, following exposure to H(2)O(2)/horseradish peroxidase, the visible spectra of these compounds does not present the same changes previously reported for mangiferin. It is concluded that Vimang-induced MPT closely reproduces mangiferin effects, and proposed that this xanthone is the main agent responsible for the extract's MPT inducing ability, by the action on mitochondrial membrane protein thiols of products arising as a consequence of the mangiferin's antioxidant activity. While this effect would oppose the beneficial effect of Vimang's antioxidant activity, it could nevertheless benefit cells exposed to over-production of ROS as occurring in cancer cells, in which triggering of MPT-mediated apoptosis may represent an important defense mechanism to their host.

  16. Rapid analysis of the main components of the total glycosides of Ranunculus japonicus by UPLC/Q-TOF-MS.

    Science.gov (United States)

    Rui, Wen; Chen, Hongyuan; Tan, Yuzhi; Zhong, Yanmei; Feng, Yifan

    2010-05-01

    A rapid method for the analysis of the main components of the total glycosides of Ranunculus japonicus (TGOR) was developed using ultra-performance liquid chromatography with quadrupole-time-of-flight mass spectrometry (UPLC/Q-TOF-MS). The separation analysis was performed on a Waters Acquity UPLC system and the accurate mass of molecules and their fragment ions were determined by Q-TOF MS. Twenty compounds, including lactone glycosides, flavonoid glycosides and flavonoid aglycones, were identified and tentatively deduced on the basis of their elemental compositions, MS/MS data and relevant literature. The results demonstrated that lactone glycosides and flavonoids were the main constituents of TGOR. Furthermore, an effective and rapid pattern was established allowing for the comprehensive and systematic characterization of the complex samples.

  17. Coptidis rhizoma and its main bioactive components: recent advances in chemical investigation, quality evaluation and pharmacological activity.

    Science.gov (United States)

    Meng, Fan-Cheng; Wu, Zheng-Feng; Yin, Zhi-Qi; Lin, Li-Gen; Wang, Ruibing; Zhang, Qing-Wen

    2018-01-01

    Coptidis rhizoma (CR) is the dried rhizome of Coptis chinensis Franch., C. deltoidea C. Y. Cheng et Hsiao or C. teeta Wall. (Ranunculaceae) and is commonly used in Traditional Chinese Medicine for the treatment of various diseases including bacillary dysentery, typhoid, tuberculosis, epidemic cerebrospinal meningitis, empyrosis, pertussis, and other illnesses. A literature survey was conducted via SciFinder, ScieneDirect, PubMed, Springer, and Wiley databases. A total of 139 selected references were classified on the basis of their research scopes, including chemical investigation, quality evaluation and pharmacological studies. Many types of secondary metabolites including alkaloids, lignans, phenylpropanoids, flavonoids, phenolic compounds, saccharides, and steroids have been isolated from CR. Among them, protoberberine-type alkaloids, such as berberine, palmatine, coptisine, epiberberine, jatrorrhizine, columamine, are the main components of CR. Quantitative determination of these alkaloids is a very important aspect in the quality evaluation of CR. In recent years, with the advances in isolation and detection technologies, many new instruments and methods have been developed for the quantitative and qualitative analysis of the main alkaloids from CR. The quality control of CR has provided safety for pharmacological applications. These quality evaluation methods are also frequently employed to screen the active components from CR. Various investigations have shown that CR and its main alkaloids exhibited many powerful pharmacological effects including anti-inflammatory, anti-cancer, anti-diabetic, neuroprotective, cardioprotective, hypoglycemic, anti-Alzheimer and hepatoprotective activities. This review summarizes the recent phytochemical investigations, quality evaluation methods, the biological studies focusing on CR as well as its main alkaloids.

  18. Reactivity of main components and substituent distribution in esterified sugarcane bagasse prepared by effective solid phase reaction.

    Science.gov (United States)

    Gan, Tao; Zhang, Yanjuan; Chen, Yane; Hu, Huayu; Yang, Mei; Huang, Zuqiang; Chen, Dong; Huang, Aimin

    2018-02-01

    Three main components of lignocellulose (cellulose, hemicellulose, and lignin isolated from sugarcane bagasse (SCB)) as well as holocellulose and SCB were modified with maleic acid by mechanical activation (MA)-assisted solid phase reaction (MASPR) technology. The order of reactivity was found to be lignin>hemicellulose>cellulose. The amorphous structure of lignin and hemicellulose mainly attributed to their better reactivity, and the modified lignin could reach a maximum degree of esterification (DE) of 93.45%. MA improved the accessibility and reactivity of cellulose, as the DE of modified cellulose gradually increased with milling time and reached the maximum value of 57.30% at 120min, which had significant effect on structure changes and DE of modified holocellulose and SCB. MA enhanced the esterification of all three components in lignocellulose with relatively high substituent distribution in them, and maleated SCB with a maximum DE of 64.17% was successfully prepared by this simple, green, and effective MASPR technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. [Comparative study on specific chromatograms and main active components of wild and cultivated rhizomes of Paris polyphylla var. yunnanensis].

    Science.gov (United States)

    Zan, Ke; Gao, Yu-Ming; Cui, Gan; Liu, Jie; Guo, Li-Nong; Zheng, Jian; Ma, Shuang-Cheng

    2017-08-01

    The present study is to compare specific chromatograms and main acitive components between wild and cultivated rhizomes of Paris polyphylla var. yunnanensis by HPLC. HPLC analysis was performed on a Waters XSelect HSS T3 C₁₈ clumn (4.6 mm×250 mm, 5 μm), with a mobile phase consisting of acetonitrile (A)-water (B) at a flow rate of 1 mL•min⁻¹ (0-50 min,30%-50%A;50-80 min,50% A,80-85 min,50%-30%A;85-100 min,30% A). The detection wavelength was 203 nm and the column temperature was controlled at 30 ℃, and the injection volume was 10 μL. HPLC specific chromatograms of wild and cultivated rhizomes of P. polyphylla var. yunnanensis were established and nine steroidal saponins were simultaneously determined by the above method. The mean contents of paris saponin Ⅶ, paris saponin H and total average contents of four pennogenyl saponins in Rhizomes of wild samples were significantly higher than those of cultivated ones. However, this result is opposite from the average content of paris saponin Ⅰ and total average contents of five dioscins in the wild and cultivated samples. Because the significant differences occurred for the specific chromatograms and main active components between the wild and cultivated P. polyphylla var. yunnanensis, much more pharmacological and clinical researches are therefore necessary. Copyright© by the Chinese Pharmaceutical Association.

  20. Study of the WWR-S IFIN-HH reactor main components stare, after 40 years working, using nondestructive methods

    International Nuclear Information System (INIS)

    Dragolici, A. C.; Zorliu, A.; Ripeanu, R.; Petran, C.; Mincu, I.

    2000-01-01

    The main goal of these investigations was to establish the security level after 40 years of working of the WWR-S research reactor of Horia Hulubei National Institute of Research and Development for Physics and Nuclear Engineering, Bucharest-Magurele. The purpose of these investigations was: checking the functionality and the physical integrity of the main components of the reactor. The physical integrity of the components is usually affected by slow processes, such as: corrosion, erosion, aging, deformations and initially hidden flaws with very slow evolutions. The methods used to determine the effects of these processes and to infer conclusions about the physical integrity of the facility are: visualizations by optical means (endoscopy and video camera), examination using ultrasounds and gammagraphy. The objective of the endoscopic checking was the view of the state of interior surfaces of the tubes and pipes, specially the inaccessible areas of the non-dismantling parts of the reactor. Big size components, such as reactor vessel, the biologic protection vessel and the main large diameter pipes of the primary cooling system, were investigated using a special device that contains a video camera connected to a PC. To obtain more information regarding the evolution of the corrosion spots, scratches and harmed areas on the investigated surfaces, their depth was checked by ultrasounds, and the welding seams structure was determined by gammagraphy. A table is given with some significant results obtained from ultrasound measurements in different points of reactor vessel, thermal column, horizontal tubes, etc. After these tests, the conclusions are: the maximum corrosion depth is 0.2 mm; - scratches are superficially, not exceeding 0.2-0.5 mm; - the traces of harmed areas are produced by the electromagnetic device utilization used for manipulation of aluminium capsules which contain irradiated substances. They are superficial, with maximum area of about 1 cm 2 ; the

  1. Essential oil from Zanthoxylum bungeanum Maxim. and its main components used as transdermal penetration enhancers: a comparative study.

    Science.gov (United States)

    Lan, Yi; Li, Hui; Chen, Yan-yan; Zhang, Ye-wen; Liu, Na; Zhang, Qing; Wu, Qing

    2014-11-01

    Our previous studies had confirmed that the essential oil from Zanthoxylum bungeanum Maxim. (Z. bungeanum oil) could effectively enhance the percutaneous permeation of drug molecules as a natural transdermal penetration enhancer. The aim of the present study is to investigate and compare the skin penetration enhancement effect of Z. bungeanum oil and its main components on traditional Chinese medicine (TCM) active components. Toxicities of Z. bungeanum oil and three selected terpene compounds (terpinen-4-ol, 1,8-cineole, and limonene) in epidermal keratinocytes (HaCaT) and dermal fibroblast (CCC-ESF-1) cell lines were measured using an MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Five model drugs in TCM external preparations, namely osthole (OT), tetramethylpyrazine (TMP), ferulic acid (FA), puerarin (PR), and geniposide (GP), which were selected based on their lipophilicity denoted by logKo/w, were tested using in vitro permeation studies in which vertical Franz diffusion cells and rat abdominal skin were employed. The secondary structure changes of skin stratum corneum (SC) and drug thermodynamic activities were investigated to understand their mechanisms of action using Fourier transform infrared (FTIR) spectroscopy and saturation solubility studies, respectively. It was found that Z. bungeanum oil showed lower toxicities in both HaCaT cells and CCC-ESF-1 cells compared with three terpene compounds used alone. The enhancement permeation capacities by all tested agents were in the following increasing order: terpinen-4-ol≈1,8-cineolemainly by affecting SC lipids. These results indicated that Z. bungeanum oil exhibited better performance in enhancing the skin permeation of active components in TCM preparations.

  2. Mechanical thermal and electric measurements on materials and components of the main coils of the Milan superconducting cyclotron

    International Nuclear Information System (INIS)

    Acerbi, E.; Rossi, L.

    1988-01-01

    The coils of the Milan Superconducting Cyclotron are the largest superconducting devices built up to now in Italy and constitute the first superconducting magnet for accelerator in Europe. Because of the large stored energy (more than 40 MJ), of the high stresses and of of the need of reliability, a lot of measurements were carried out as well on materials used for the coils, both on superconducting cable and structural materials, as on the main components of the coils and on two double pancakes prototypes (wound with full copper cable). In this paper the results on these measurements are reported and the results of tests on the prototypes are discussed. The aim is to provide an easy source of data for superconducting coils useful to verify calculations or to improve the performances

  3. Feasibility Study of Cryogenic Cutting Technology by Using a Computer Simulation and Manufacture of Main Components for Cryogenic Cutting System

    International Nuclear Information System (INIS)

    Kim, Sung Kyun; Lee, Dong Gyu; Lee, Kune Woo; Song, Oh Seop

    2009-01-01

    Cryogenic cutting technology is one of the most suitable technologies for dismantling nuclear facilities due to the fact that a secondary waste is not generated during the cutting process. In this paper, the feasibility of cryogenic cutting technology was investigated by using a computer simulation. In the computer simulation, a hybrid method combined with the SPH (smoothed particle hydrodynamics) method and the FE (finite element) method was used. And also, a penetration depth equation, for the design of the cryogenic cutting system, was used and the design variables and operation conditions to cut a 10 mm thickness for steel were determined. Finally, the main components of the cryogenic cutting system were manufactures on the basis of the obtained design variables and operation conditions.

  4. Comparative analysis of the main bioactive components of San-ao decoction and its series of formulations.

    Science.gov (United States)

    Shu, Xiaoyun; Tang, Yuping; Jiang, Chenxue; Shang, Erxing; Fan, Xinshen; Ding, Anwei

    2012-11-01

    A high performance liquid chromatographic (HPLC) method with diode array detection (DAD) was established for simultaneous determination of seven main bioactive components in San-ao decoction and its series of formulae (San-ao decoction, Wu-ao decoction, Qi-ao decoction and Jia-wei San-ao decoction). Seven compounds were analyzed simultaneously with a XTerra C(18) column (4.6 mm × 250 mm, 5 µm) using a linear gradient elution of a mobile phase containing acetonitrile (A) and a buffer solution (0.02 mol/L potassium dihydrogen phosphate and adjusted to pH 3 using phosphoric acid) (B); the flow rate was 1.0 mL/min. The sample was detected with DAD at 210, 254 and 360 nm and the column was maintained at 30 °C. All the compounds showed good linearity (r2 > 0.9984) in the tested concentration range. The precisions were evaluated by intra-day and inter-day tests, and relative standard deviation (R.S.D.) values within the range of 0.83%–2.53% and 0.64%–2.77% were reported, respectively. The recoveries of the quantified compounds were observed to cover a range from 95.34% and 104.82% with R.S.D. values less than 2.72%. The validated method was successfully applied for the simultaneous determination of seven main bioactive components including ephedrine (1), amygdalin (2), liquiritin (3), benzoic acid (4), isoliquiritin (5), formononetin (6) and glycyrrhizic acid (7) in San-ao decoction and its series of formulae. The results also showed a wide variation in the content of the identified active compounds in these samples, which could also be helpful to illustrate the drug interactions after some herbs combined in different formulations.

  5. S-process studies using single and pulsed neutron exposures

    Science.gov (United States)

    Beer, H.

    The formation of heavy elements by slow neutron capture (s-process) is investigated. A pulsed neutron irradiation leading to an exponential exposure distribution is dominant for nuclei from A = 90 to 200. For the isotopes from iron to zirconium an additional 'weak' s-process component must be superimposed. Calculations using a single or another pulsed neutron exposure for this component have been carried out in order to reproduce the abundance pattern of the s-only and s-process dominant isotopes. For the adjustment of these calculations to the empirical values, the inclusion of new capture cross section data on Se76 and Y89 and the consideration of the branchings at Ni63, Se79, and Kr85 was important. The combination of an s-process with a single and a pulsed neutron exposure yielded a better representation of empirical abundances than a two component pulsed s-process.

  6. S-process studies using single and pulsed neutron exposures

    International Nuclear Information System (INIS)

    Beer, H.

    1986-01-01

    The formation of heavy elements by slow neutron capture (s-process) is investigated. A pulsed neutron irradiation leading to an exponential exposure distribution is dominant for nuclei from A=90 to 200. For the isotopes from iron to zirconium an additional ''weak'' s-process component must be superimposed. Calculations using a single or another pulsed neutron exposure for this component have been carried out in order to reproduce the abundance pattern of the s-only and s-process dominant isotopes. For the adjustment of these calculations to the empirical values, including new capture cross section data on Se76 and Y89 and the consideration of the branchings at Ni63, Se79, and Kr85 was important. The combination of a s-process with a single and a pulsed neutron exposure yielded a better representation of empirical abundances than a two component pulsed s-process

  7. Protective effect of thymoquinone, the main component of Nigella Sativa, against diazinon cardio-toxicity in rats.

    Science.gov (United States)

    Danaei, Gholam Hassan; Memar, Bahram; Ataee, Ramin; Karami, Mohammad

    2018-04-12

    Several studies have shown that oxidative stress and cell damage can occur at very early stages of diazinon (DZN) exposure. The present study was designed to determine the beneficial effect of thymoquinone (Thy), the main component of Nigella sativa (black seed or black cumin), against DZN cardio-toxicity in rats. In the present experimental study, 48 male Wistar rats were randomly divided into six groups: control (corn oil gavages), DZN gavages (20 mg/kg/day), Thy gavages (10 mg/kg/day) and Thy + DVN gavages (2.5, 5 and 10 mg/kg/day). Treatments were continued for 28 days, then the animals were anesthetized by ether and superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), lactate dehydrogenize (LDH) and glutathione peroxide (GPX) activity was evaluated. In addition, glutathione (GSH) and malondialdehyde (MDA) the heart tissue and creatinephosphokinase-MB (CPK-MB) and troponin (TPI) levels and cholinesterase activity in the blood were evaluated. DZN-induced oxidative damage and elevated the levels of the cardiac markers CK-MB, TPI, MDA and LDH and decreased SOD, CAT and cholinesterase activity and GSH level compared with the control group. Treatment with Thy reduced DZN cardio-toxicity and cholinesterase activity. The success of Thy supplementation against DZN toxicity can be attributed to the antioxidant effects of its constituents. Administration of Thy as a natural antioxidant decreased DZN cardio-toxicity and improved cholinesterase activity in rats through the mechanism of free radical scavenging.

  8. Insecticidal Activity of Essential Oil of Carum Carvi Fruits from China and Its Main Components against Two Grain Storage Insects

    Directory of Open Access Journals (Sweden)

    Shu Shan Du

    2010-12-01

    Full Text Available During our screening program for agrochemicals from Chinese medicinal herbs and wild plants, the essential oil of Carum carvi fruits was found to possess strong contact toxicity against Sitophilus zeamais and Tribolium castaneum adults, with LD50 values of 3.07 and 3.29 mg/adult, respectively, and also showed strong fumigant toxicity against the two grain storage insects with LC50 values of 3.37 and 2.53 mg/L, respectively. The essential oil obtained by hydrodistillation was investigated by GC and GC-MS. The main components of the essential oil were identified to be (R-carvone (37.98% and D-limonene (26.55% followed by α-pinene (5.21, cis-carveol (5.01% and b-myrcene (4.67%. (R-Carvone and D-limonene were separated and purified by silica gel column chromatography and preparative thin layer chromatography, and further identified by means of physicochemical and spectrometric analysis. (R-Carvone and D-limonene showed strong contact toxicity against S. zeamais (LD50 = 2.79 and 29.86 mg/adult and T. castaneum (LD50 = 2.64 and 20.14 mg/adult. (R-Carvone and D-limonene also possessed strong fumigant toxicity against S. zeamais (LC50 = 2.76 and 48.18 mg/L and T. castaneum adults (LC50 = 1.96 and 19.10 mg/L.

  9. Quantitative Proteomic Analysis of Venoms from Russian Vipers of Pelias Group: Phospholipases A₂ are the Main Venom Components.

    Science.gov (United States)

    Kovalchuk, Sergey I; Ziganshin, Rustam H; Starkov, Vladislav G; Tsetlin, Victor I; Utkin, Yuri N

    2016-04-12

    Venoms of most Russian viper species are poorly characterized. Here, by quantitative chromato-mass-spectrometry, we analyzed protein and peptide compositions of venoms from four Vipera species (V. kaznakovi, V. renardi, V. orlovi and V. nikolskii) inhabiting different regions of Russia. In all these species, the main components were phospholipases A₂, their content ranging from 24% in V. orlovi to 65% in V. nikolskii. Altogether, enzyme content in venom of V. nikolskii reached ~85%. Among the non-enzymatic proteins, the most abundant were disintegrins (14%) in the V. renardi venom, C-type lectin like (12.5%) in V. kaznakovi, cysteine-rich venom proteins (12%) in V. orlovi and venom endothelial growth factors (8%) in V. nikolskii. In total, 210 proteins and 512 endogenous peptides were identified in the four viper venoms. They represented 14 snake venom protein families, most of which were found in the venoms of Vipera snakes previously. However, phospholipase B and nucleotide degrading enzymes were reported here for the first time. Compositions of V. kaznakovi and V. orlovi venoms were described for the first time and showed the greatest similarity among the four venoms studied, which probably reflected close relationship between these species within the "kaznakovi" complex.

  10. Determining the residual lifetime for the main RBMK components in frame of life extension of power units

    International Nuclear Information System (INIS)

    Baldin, V.D.; Petrov, A.A.; Potapov, A.A.

    2005-01-01

    At present time 11 power units of NPPs with RBMK reactors produce annually 140 billion kWh of electricity, which is about half of all electricity generated at Russian NPPs. Commissioned during the period of 1973 to 1990, they have the specified service life of 30 years. The power units have been regularly upgraded during operation to raise their safety and reliability. As the result now they meet modem requirements in terms of safety and their lifetime can considerably exceed their specified service life. The task of the plant life extension becomes more urgent. The main nonreplaceable RBMK reactor components that determine the reactor life, are graphite stack and metal support structures. The aging of these structures is monitored and the structures residual lifetime is predicted in accordance with procedures approved by regulatory authorities. The lead unit among all RBMK power units is Leningrad NPP Unit 1 commissioned in 1973. A complex of activities was performed for this power unit in 2002-2003 to prove the feasibility of its life extension. In terms of defining the residual lifetime of the reactor components, the activities were performed in three major areas: - examination of the state of the reactor structures; - materials studies of irradiated metal and graphite specimens in hot chambers; - performing the calculation and prediction evaluations. The results of examining the metal structures and studying specimens have shown that: 1)The metal and the welds do not have visible defects. The state of protective coatings is largely satisfactory. 2)The ultimate strength and hardness of steel have grown. 3)The brittle fracture transition temperature shift is at the allowable level. 4)The leak-tightness of the metal structures has not been violated. The results of the graphite stack examination have shown that the graphite is at the hardening stage. No tendency for deterioration of mechanical properties has been recorded. According to the results of measuring the

  11. Effects assessment of 10 functioning years on the main components of the molten salt PCS experimental facility of ENEA

    Science.gov (United States)

    Gaggioli, Walter; Di Ascenzi, Primo; Rinaldi, Luca; Tarquini, Pietro; Fabrizi, Fabrizio

    2016-05-01

    In the frame of the Solar Thermodynamic Laboratory, ENEA has improved CSP Parabolic Trough technologies by adopting new advanced solutions for linear tube receivers and by implementing a binary mixture of molten salt (60% NaNO3 and 40% KNO3) [1] as both heat transfer fluid and heat storage medium in solar field and in storage tanks, thus allowing the solar plants to operate at high temperatures up to 550°C. Further improvements have regarded parabolic mirror collectors, piping and process instrumentation. All the innovative components developed by ENEA, together with other standard parts of the plant, have been tested and qualified under actual solar operating conditions on the PCS experimental facility at the ENEA Casaccia Research Center in Rome (Italy). The PCS (Prova Collettori Solari, i.e. Test of Solar Collectors) facility is the main testing loop built by ENEA and it is unique in the world for what concerns the high operating temperature and the fluid used (mixture of molten salt). It consists in one line of parabolic trough collectors (test section of 100 m long life-size solar collectors) using, as heat transfer fluid, the aforesaid binary mixture of molten salt up to 10 bar, at high temperature in the range 270° and 550°C and a flow rate up to 6.5 kg/s. It has been working since early 2004 [2] till now; it consists in a unique closed loop, and it is totally instrumented. In this paper the effects of over ten years qualification tests on the pressurized tank will be presented, together with the characterization of the thermal losses of the piping of the molten salt circuit, and some observations performed on the PCS facility during its first ten years of operation.

  12. Interaction of calcium silicate hydrates (C-S-H), the main components of cement, with alkaline chlorides, analogy with clays

    International Nuclear Information System (INIS)

    Viallis-Terrisse, H.

    2000-01-01

    This work, belonging to a more general study on the structure and reactivity of cement, deals with the experimental and theoretical analysis of the interaction of alkaline chlorides with calcium silicate hydrates (C-S-H), the main components of cement paste. The interaction of alkaline cations with C-S-H is interfacial, involving both electrostatic and surface complexation mechanisms. The C-S-H surface is constituted of silanol sites, partially dissociated due to the high pH of the interstitial solution. The calcium ions, present in large amounts in the equilibrium solution of C-S-H, constitute potential determining ions for the C-S-H surface. The alkaline ions seem to compete with calcium for the same surface sites. The adsorption isotherms show that caesium presents a better affinity than sodium and lithium for the C-S-H surface. Moreover, solid-state NMR suggests that caesium forms with the surface sites inner-sphere complexes, whereas sodium seems to keep its hydration sphere. These results are in agreement with zeta potential measurements, which let suppose a specific adsorption of caesium ions, and an indifferent behaviour of both other alkaline ions. A model for the C-S-H surface was proposed, from the electric double layer model, and mass action laws expressing the complexation of the different ionic species with the silanol sites. The whole study relies on a structural analogy with smectites, some clays presenting well-known cationic adsorption properties. The structural similarity between both minerals is enhanced by some similarities of reactivity, though significant behaviour differences could also be noted. (author)

  13. Main components of PM10 in an area influenced by a cement plant in Catalonia, Spain: Seasonal and daily variations.

    Science.gov (United States)

    Rovira, Joaquim; Sierra, Jordi; Nadal, Martí; Schuhmacher, Marta; Domingo, José L

    2018-05-01

    Particulate matter (PM) composition has a key role in a wide range of health outcomes, such as asthma, chronic obstructive pulmonary disease, lung cancer, cardiovascular disease, and death, among others. Montcada i Reixac, a municipality located in the Barcelona metropolitan area (Catalonia, Spain), for its location and orography, is an interesting case- study to investigate air pollution. The area is also characterized by the presence of different industrial emission sources, including a cement factory and a large waste management plant, as well as an intense traffic. In this study, PM 10 levels, trace elements, ions, and carbonaceous particles were determined for a long time period (2013-2016) in this highly polluted area. PM 10 samples were collected during six consecutive days in two campaigns (cold and warm) per year. A number of elements (As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, K, La, Li, Hg, Mg, Mn, Mo, Nb, Nd, Ni, Pb, Pr, Rb, Sb, Sc, Se, Sm, Sn, Sr, Tb, Th, Ti, Tl, U, V, W, Y, Yb, and Zr), ions (Cl - , SO 4 2- , NO 3 - , and NH 4 + ), and carbonaceous content (total carbon, organic plus elemental carbon, and CO 3 2- ), were analysed. These data were used to identify the PM 10 main components: mineral matter, sea spray, secondary inorganic aerosols, organic matter plus elemental carbon, trace elements or indeterminate fraction. Although a clear seasonality (cold vs. warm periods) was found, there were no differences between working days and weekends. Obviously, the cement plant influences the surrounding environment. However, no differences in trace elements related with the cement plant activity (Al, Ca, Ni and V) between weekdays and weekends were noted. However, some traffic-related elements (i.e., Co, Cr, Mn, and Sb) showed significantly higher concentrations in weekdays. Copyright © 2018 Elsevier Inc. All rights reserved.

  14. [Determination of six main components in compound theophylline tablet by convolution curve method after prior separation by column partition chromatography

    Science.gov (United States)

    Zhang, S. Y.; Wang, G. F.; Wu, Y. T.; Baldwin, K. M. (Principal Investigator)

    1993-01-01

    On a partition chromatographic column in which the support is Kieselguhr and the stationary phase is sulfuric acid solution (2 mol/L), three components of compound theophylline tablet were simultaneously eluted by chloroform and three other components were simultaneously eluted by ammonia-saturated chloroform. The two mixtures were determined by computer-aided convolution curve method separately. The corresponding average recovery and relative standard deviation of the six components were as follows: 101.6, 1.46% for caffeine; 99.7, 0.10% for phenacetin; 100.9, 1.31% for phenobarbitone; 100.2, 0.81% for theophylline; 99.9, 0.81% for theobromine and 100.8, 0.48% for aminopyrine.

  15. How insects overcome two-component plant chemical defence: plant β-glucosidases as the main target for herbivore adaptation.

    Science.gov (United States)

    Pentzold, Stefan; Zagrobelny, Mika; Rook, Fred; Bak, Søren

    2014-08-01

    Insect herbivory is often restricted by glucosylated plant chemical defence compounds that are activated by plant β-glucosidases to release toxic aglucones upon plant tissue damage. Such two-component plant defences are widespread in the plant kingdom and examples of these classes of compounds are alkaloid, benzoxazinoid, cyanogenic and iridoid glucosides as well as glucosinolates and salicinoids. Conversely, many insects have evolved a diversity of counteradaptations to overcome this type of constitutive chemical defence. Here we discuss that such counter-adaptations occur at different time points, before and during feeding as well as during digestion, and at several levels such as the insects’ feeding behaviour, physiology and metabolism. Insect adaptations frequently circumvent or counteract the activity of the plant β-glucosidases, bioactivating enzymes that are a key element in the plant’s two-component chemical defence. These adaptations include host plant choice, non-disruptive feeding guilds and various physiological adaptations as well as metabolic enzymatic strategies of the insect’s digestive system. Furthermore, insect adaptations often act in combination, may exist in both generalists and specialists, and can act on different classes of defence compounds. We discuss how generalist and specialist insects appear to differ in their ability to use these different types of adaptations: in generalists, adaptations are often inducible, whereas in specialists they are often constitutive. Future studies are suggested to investigate in detail how insect adaptations act in combination to overcome plant chemical defences and to allow ecologically relevant conclusions.

  16. Prediction of radionuclide accumulation in main ecosystem components of NPP cooling water reservoirs and assessment of acceptable radionuclide disposal into water reservoir

    International Nuclear Information System (INIS)

    Egorov, Yu.A.; Kazakov, S.V.

    1987-01-01

    The problems of prediction of radionuclide accumulation in ecosystem main components of NPP cooling water-reservoirs (CWR) and assessment of radionuclide acceptable disposal into water reservoir are considered. Two models are nessecary for the calculation technique: model of radionuclide migration and accumulation in CWR ecosystem components and calculation model of population dose commitment due to water consumption (at the public health approach to the normalization of the NPP radioactive effect on CWC) or calculation model of dose commitment on hydrocenosis components (at the ecological approach to the normalization). Analytical calculations and numerical calculation results in the model CWC, located in the USSR middle region, are presented

  17. Comparative analysis of the main bioactive components of Xin-Sheng-Hua granule and its single herbs by ultrahigh performance liquid chromatography with tandem mass spectrometry.

    Science.gov (United States)

    Pang, Hanqing; Wang, Jun; Tang, Yuping; Xu, Huiqin; Wu, Liang; Jin, Yi; Zhu, Zhenhua; Guo, Sheng; Shi, Xuqin; Huang, Shengliang; Sun, Dazheng; Duan, Jin-Ao

    2016-11-01

    Xin-Sheng-Hua granule, a representative formula for postpartum hemorrhage, has been used clinically to treat postpartum diseases. Its main bioactive components comprise aromatic acids, phthalides, alkaloids, flavonoids, and gingerols among others. To investigate the changes in main bioactive constituents in its seven single herbs before and after compatibility, a rapid, simple, and sensitive method was developed for comparative analysis of 27 main bioactive components by using ultrahigh-performance liquid chromatography with triple quadrupole electrospray tandem mass spectrometry for the first time. The sufficient separation of 27 target constituents was achieved on a Thermo Scientific Hypersil GOLD column (100 mm × 3 mm, 1.9 μm) within 20 min under the optimized chromatographic conditions. Compared with the theoretical content, the observed content of each analyte showed remarkable differences in Xin-Sheng-Hua granule except thymine, p-coumaric acid, senkyunolide I, senkyunolide H, and ligustilide; the total contents of 27 components increased significantly, and the content variation degrees for the different components were gingerols > flavonoids > aromatic acids > alkaloids > phthalides. The results could provide a good reference for the quality control of Xin-Sheng-Hua granule and might be helpful to interpret the drug interactions based on variation of bioactive components in formulae. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Principal component analysis of the main factors of line intensity enhancements observed in oscillating direct current plasma

    International Nuclear Information System (INIS)

    Stoiljkovic, Milovan M.; Pasti, Igor A.; Momcilovic, Milos D.; Savovic, Jelena J.; Pavlovic, Mirjana S.

    2010-01-01

    Enhancement of emission line intensities by induced oscillations of direct current (DC) arc plasma with continuous aerosol sample supply was investigated using multivariate statistics. Principal component analysis (PCA) was employed to evaluate enhancements of 34 atomic spectral lines belonging to 33 elements and 35 ionic spectral lines belonging to 23 elements. Correlation and classification of the elements were done not only by a single property such as the first ionization energy, but also by considering other relevant parameters. Special attention was paid to the influence of the oxide bond strength in an attempt to clarify/predict the enhancement effect. Energies of vaporization, atomization, and excitation were also considered in the analysis. In the case of atomic lines, the best correlation between the enhancements and first ionization energies was obtained as a negative correlation, with weak consistency in grouping of elements in score plots. Conversely, in the case of ionic lines, the best correlation of the enhancements with the sum of the first ionization energies and oxide bond energies was obtained as a positive correlation, with four distinctive groups of elements. The role of the gas-phase atom-oxide bond energy in the entire enhancement effect is underlined.

  19. Purified Cannabidiol, the main non-psychotropic component of Cannabis sativa, alone, counteracts neuronal apoptosis in experimental multiple sclerosis.

    Science.gov (United States)

    Giacoppo, S; Soundara Rajan, T; Galuppo, M; Pollastro, F; Grassi, G; Bramanti, P; Mazzon, E

    2015-12-01

    Multiple Sclerosis (MS) is a global concern disease leading to a progressive, chronic and demyelinating condition, affecting the central nervous system (CNS). The pathology has an inflammatory/autoimmune origin; nevertheless, neuronal cell death mechanisms are not to be underestimated. The present study was designed to test the effects of intraperitoneal administration of cannabidiol (CBD), the main non-psychotropic cannabinoid of Cannabis sativa (CS), in an experimental model of MS. The aim is to evaluate the capability of CBD administration to thwart the cascade of mediators involved in MS-induced apoptosis. Experimental Autoimmune Encephalomyelitis (EAE) was induced by immunization with myelin oligodendroglial glycoprotein (MOG)35-55 peptide in mice. After immunization, mice were observed daily for signs of EAE and weight loss. Disease signs were evaluated using a standardized scoring system. Immunohistochemical and Western blot assessments of key apoptotic markers reveal that CBD treatment is able to avoid Fas pathway activation, phospho-ERK p42/44 and cleaved caspase-3 triggering as well as alterations in mitochondrial permeability due to Bax/Bcl-2 unbalance. Moreover, CBD interferes with p53-p21 axis activation. As results, the absence of tissue apobody formation in spinal cord tissues of EAE-mice treated with CBD was established. Most of therapeutic properties of CS are currently ascribed to the psychotropic effects of phenylterpenoid delta-9 tetrahydrocannabinol. We have demonstrated that, alone, purified CBD possesses an anti-apoptotic power against the neurodegenerative processes underlying MS development. This represents an interesting new profile of CBD that could lead to its introduction in the clinical management of MS.

  20. Effects of growing location on the production of main active components and antioxidant activity of Dasiphora fruticosa (L.) Rydb. by chemometric methods.

    Science.gov (United States)

    Liu, Wei; Wang, Dongmei; Hou, Xiaogai; Yang, Yueqin; Xue, Xian; Jia, Qishi; Zhang, Lixia; Zhao, Wei; Yin, Dongxue

    2018-05-17

    Traditional Chinese medicine (TCM) plays a very important role in the health system of China. The content and activity of active component are main indexes that evaluate the quality of TCM, however they may vary with environmental factors in their growing locations. In this study, effects of environmental factors on the contents of active components and antioxidant activity of Dasiphora fruticosa from the five main production areas of China were investigated. The contents of tannin, total flavonoid and rutin were determined and varied within the range of 7.65-10.69%, 2.30-5.39% and 0.18-0.81%, respectively. Antioxidant activity was determined by DPPH assay, with the DPPH IC 50 values ranged from 8.791 to 32.534μg mL -1 . In order to further explore the cause of these significant geographical variations, the chemometric methods including correlation analysis, principal component analysis, gray correlation analysis, and path analysis were conducted. The results showed environmental factors had significant effect on the active component contents and antioxidant activity. Rapidly available phosphorus (RAP) and rapidly available nitrogen (RAN) were common dominant factors, and a significant positive correlation was observed between RAP and active components and antioxidant activity (Pcomponents and strong antioxidant activity, Bange in Tibet and Geermu in Qinghai Province was selected as a favorable growing location, respectively. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  1. Assessment of the flotability of chalcopyrite, molybdenite and pyrite using biosolids and their main components as collectors for greening the froth flotation of copper sulphide ores.

    OpenAIRE

    Sobarzo, Francisco; Herrera Urbina, Ronaldo; Higueras Higueras, Pablo Leon; Sáez Navarrete, César; Godoy Faúndez, Alex; Reyes Bozo, Lorenzo; Vásquez Bestagno, Jorge

    2014-01-01

    Biosolids and representative compounds of their main components ? humic acids, sugars, and proteins ? have been tested as possible environment-friendly collectors and frothers for the flotation of copper sulphide ores. The floatability of chalcopyrite and molybdenite ? both valuable sulphide minerals present in these ores ? as well as non-valuable pyrite was assessed through Hallimond tube flotation tests. Humic acids exhibit similar collector ability for chalcopyrite and molybdenite as that ...

  2. Effect of SPL (Spent Pot Liner) and its main components on root growth, mitotic activity and phosphorylation of Histone H3 in Lactuca sativa L.

    Science.gov (United States)

    Freitas, Aline Silva; Fontes Cunha, Isabela Martinez; Andrade-Vieira, Larissa Fonseca; Techio, Vânia Helena

    2016-02-01

    Spent Pot Liner (SPL) is a solid waste from the aluminum industry frequently disposed of in industrial landfills; it can be leached and contaminate the soil, sources of drinking water and plantations, and thus may pose a risk to human health and to ecosystems. Its composition is high variable, including cyanide, fluoride and aluminum salts, which are highly toxic and environmental pollutants. This study evaluated the effect of SPL and its main components on root growth and the mitosis of Lactuca sativa, by investigating the mechanisms of cellular and chromosomal alterations with the aid of immunolocalization. To this end, newly emerged roots of L. sativa were exposed to SPL and its main components (solutions of cyanide, fluoride and aluminum) and to calcium chloride (control) for 48h. After this, root length was measured and cell cycle was examined by means of conventional cytogenetics and immunolocalization. Root growth was inhibited in the treatments with SPL and aluminum; chromosomal and nuclear alterations were observed in all treatments. The immunolocalization evidenced normal dividing cells with regular temporal and spatial distribution of histone H3 phosphorylation at serine 10 (H3S10ph). However, SPL and its main components inhibited the phosphorylation of histone H3 at serine 10, inactivated pericentromeric regions and affected the cohesion of sister chromatids, thus affecting the arrangement of chromosomes in the metaphase plate and separation of chromatids in anaphase. In addition, these substances induced breaks in pericentromeric regions, characterized as fragile sites. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Development of 20 kW input power coupler for 1.3 GHz ERL main linac. Component test at 30 kW IOT test stand

    International Nuclear Information System (INIS)

    Sakai, Hiroshi; Umemori, Kensei; Sakanaka, Shogo; Takahashi, Takeshi; Furuya, Takaaki; Shinoe, Kenji; Ishii, Atsushi; Nakamura, Norio; Sawamura, Masaru

    2009-01-01

    We started to develop an input coupler for a 1.3 GHz ERL superconducting cavity. Required input power is about 20 kW for the cavity acceleration field of 20 MV/m and the beam current of 100 mA in energy recovery operation. The input coupler is designed based on the STF-BL input coupler and some modifications are applied to the design for the CW 20 kW power operation. We fabricated input coupler components such as ceramic windows and bellows and carried out the high-power test of the components by using a 30 kW IOT power source and a test stand constructed for the highpower test. In this report, we mainly describe the results of the high-power test of ceramic window and bellows. (author)

  4. Rapid determination of main components by means of flame-atomic-absorption spectrometry for chromium, silicon and tungsten in CrSiW materials

    International Nuclear Information System (INIS)

    Mueller, E.; Stahlberg, R.

    1985-01-01

    The application of Flame-Atomic-Absorption Spectrometry (FAAS) for determining chromium, silicon and tungsten in CrSiW materials is described. The FAAS determinations of the main components are shown under optimum conditions. Sufficient precision and reliability have been achieved for routine analysis. The application of a mixture of acids for preparing CrSiW solutions is proposed. The preparation of samples is discussed in detail. Optimum conditions are recommended for determining chromium, silicon and tungsten using one solution only. (orig.) [de

  5. Optimization of Extraction Process for Antidiabetic and Antioxidant Activities of Kursi Wufarikun Ziyabit Using Response Surface Methodology and Quantitative Analysis of Main Components.

    Science.gov (United States)

    Edirs, Salamet; Turak, Ablajan; Numonov, Sodik; Xin, Xuelei; Aisa, Haji Akber

    2017-01-01

    By using extraction yield, total polyphenolic content, antidiabetic activities (PTP-1B and α -glycosidase), and antioxidant activity (ABTS and DPPH) as indicated markers, the extraction conditions of the prescription Kursi Wufarikun Ziyabit (KWZ) were optimized by response surface methodology (RSM). Independent variables were ethanol concentration, extraction temperature, solid-to-solvent ratio, and extraction time. The result of RSM analysis showed that the four variables investigated have a significant effect ( p analysis of effective part of KWZ was characterized via UPLC method, 12 main components were identified by standard compounds, and all of them have shown good regression within the test ranges and the total content of them was 11.18%.

  6. Hydrophilic compounds in culture filtrates of Fusarium oxysporum f. sp. cubense GCV [01210] induce protection to banana leave toward a main pathogen phytotoxic component

    Directory of Open Access Journals (Sweden)

    Nayanci Portal González

    2014-07-01

    Full Text Available Panama disease caused by Fusarium oxysporum f. sp. cubense (Foc, is among the most important diseases in Musa spp. Foc is a necrotrophic fungus, their phytotoxins play a role in disease development. Previously culture filtrate (FCC 15 days incubation with differential phytotoxic activity against two Musa cultivars was obtained. From this, the main fraction with nonspecific phytotoxic activity against both cultivars was purified. In this study, the biological activity of the aqueous phase and the main phytotoxic fraction purified from organic extract of Fusarium oxysporum f. sp. cubense VCG [01210] Race 1 FCC was determined on banana leaves of cv. `Gros Michel' (susceptible and `FHIA-01' (resistant. Foc FCC phytotoxic effect was confirmed. The aqueous phase showed no phytotoxic activity on both cultivars, while the simultaneous application of the aqueous phase with the main phytotoxic fraction induced a differential response of tissues in susceptible and resistant cultivars evaluated. The results indicated that the compounds present in the aqueous phase are required to induce the protection of leaf tissue against phytotoxic main component of the pathogen. Key words: culture filtrate, Panama disease, resistant, susceptible

  7. Searching for the main anti-bacterial components in artificial Calculus bovis using UPLC and microcalorimetry coupled with multi-linear regression analysis.

    Science.gov (United States)

    Zang, Qing-Ce; Wang, Jia-Bo; Kong, Wei-Jun; Jin, Cheng; Ma, Zhi-Jie; Chen, Jing; Gong, Qian-Feng; Xiao, Xiao-He

    2011-12-01

    The fingerprints of artificial Calculus bovis extracts from different solvents were established by ultra-performance liquid chromatography (UPLC) and the anti-bacterial activities of artificial C. bovis extracts on Staphylococcus aureus (S. aureus) growth were studied by microcalorimetry. The UPLC fingerprints were evaluated using hierarchical clustering analysis. Some quantitative parameters obtained from the thermogenic curves of S. aureus growth affected by artificial C. bovis extracts were analyzed using principal component analysis. The spectrum-effect relationships between UPLC fingerprints and anti-bacterial activities were investigated using multi-linear regression analysis. The results showed that peak 1 (taurocholate sodium), peak 3 (unknown compound), peak 4 (cholic acid), and peak 6 (chenodeoxycholic acid) are more significant than the other peaks with the standard parameter estimate 0.453, -0.166, 0.749, 0.025, respectively. So, compounds cholic acid, taurocholate sodium, and chenodeoxycholic acid might be the major anti-bacterial components in artificial C. bovis. Altogether, this work provides a general model of the combination of UPLC chromatography and anti-bacterial effect to study the spectrum-effect relationships of artificial C. bovis extracts, which can be used to discover the main anti-bacterial components in artificial C. bovis or other Chinese herbal medicines with anti-bacterial effects. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. The main component of an alarm pheromone of kissing bugs plays multiple roles in the cognitive modulation of the escape response

    Directory of Open Access Journals (Sweden)

    Sebastián eMinoli

    2013-07-01

    Full Text Available Innate responses in animals can be modulated by experience. Disturbed adults of the triatomine bug Triatoma infestans release an alarm pheromone (AP that elicits an escape response in conspecific larvae. The main component of this AP, the isobutyric acid (IsoAc, alone has already shown to generate an escape response in this species. However, not much is known about the modulation of this behavior by non-associative and associative cognitive processes. We present here evidences of the cognitive capacities of T. infestans larvae in an escape context under different conditioning paradigms, including IsoAc in different roles. We show that: 1 the duration of a pre-exposure to IsoAc plays a main role in determining the type of non-associative learning expressed: short time pre-exposures elicit a sensitization while a longer pre-exposure time triggers a switch from repellence to attractiveness; 2 a simple pre-exposure event is enough to modulate the escape response of larvae to the AP and to its main component: IsoAc; 3 IsoAc and the AP are perceived as different chemical entities; 4 an association between IsoAc and an aversive stimulus can be created under a classical conditioning paradigm; 5 an association between IsoAc and a self-action can be generated under an operant conditioning. These results evince that IsoAc can attain multiple and different cognitive roles in the modulation of the escape response of triatomines and show how cognitive processes can modulate a key behavior for surviving, as it is the escaping response in presence of a potential danger in insects.

  9. Determination of the Three Main Components of the Grapevine Moth Pest Pheromone in Grape-Related Samples by Headspace-Gas Chromatography-Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    María del Carmen Alcudia-León

    2017-10-01

    Full Text Available The grapevine moth (Lobesia botrana is the most significant pest of viticulture. This article reports the development of an analytical method that allows the instrumental determination of the three main pheromone components of the pest ((E,Z-7,9-dodecadien-1-yl acetate, (E,Z-7,9-dodecadien-1-ol and (Z-9-dodecen-1-yl acetate in grape-related samples (must, table grape and wine grape. The combination of headspace, gas chromatography and mass spectrometry provides limits of detection in the range of 60–420 ng/Kg and precision, expressed as a relative standard deviation, better than 8.5%. This analytical approach is rapid and simple and opens a door to the study of the pest incidence on the final products.

  10. Radiation sensitivity of microorganisms adhering to the crude drug ''Bezoar Bovis'' and stability of its main components for γ-ray irradiation

    International Nuclear Information System (INIS)

    Ohnishi, Tokuhiro; Okamoto, Shinichi; Kimura, Syojiro; Taimatsu, Meiko; Endo, Akira.

    1994-01-01

    The sterilization dose (SD) of γ rays required for the microbial-contaminated crude drug ''Bezoar Bovis'' and the residual rates of its characteristic and effective components, bilirubin and some kinds of cholic acid, were studied experimentally. Samples of Bezoar Bovis made in America were used. The contamination level of the samples was 2.2 x 10 8 cells of bacteria and 6.0 x 10 5 spores of fungi per g specimen. The survival rate of these microorganisms showed nearly an exponential dependence on radiation dose. The decimal reduction doses (D 10 ) for the bacteria and fungi were found to be 1.5 kGy and 1.1 kGy respectively. From these values, the dose required for attaining the contamination level provided by the administrative guidance (Bacteria, 3 cells/g; Fungi, 2 spores/g) were estimated to be 7.5 kGy and 4.3 kGy, respectively. The G-values for bilirubin, cholic acid and deoxycholic acid were calculated to be 13, 6 and 8, respectively. If the sterilization treatment is carried out with a dose less than 10 kGy on the specimen in a dry powder state, the reduction of the main components such as bilirubin and cholic acids by γ-ray irradiation is considered to be negligible. (author)

  11. Crystallization and preliminary X-ray analysis of PaaAC, the main component of the hydroxylase of the Escherichia coli phenylacetyl-coenzyme A oxygenase complex

    International Nuclear Information System (INIS)

    Grishin, Andrey M.; Ajamian, Eunice; Zhang, Linhua; Cygler, Miroslaw

    2010-01-01

    The expression, purification, crystallization and preliminary crystallographic analysis of the PaaAC complex is reported. This is the main component of the E. coliphenylacetyl-coenzyme A oxygenase complex. The Escherichia coli paa operon encodes enzymes of the phenylacetic acid-utilization pathway that metabolizes phenylacetate in the form of a coenzyme A (CoA) derivative. The phenylacetyl-coenzyme A oxygenase complex, which has been postulated to contain five components designated PaaABCDE, catalyzes ring hydroxylation of phenylacetyl-CoA. The PaaAC subcomplex shows low sequence similarity to other bacterial multicomponent monooxygenases (BMMs) and forms a separate branch on the phylogenetic tree. PaaAC, which catalyzes the hydroxylation reaction, was purified and crystallized in the absence of a bound ligand as well as in complexes with CoA, 3-hydroxybutyryl-CoA, benzoyl-CoA and the true substrate phenylacetyl-CoA. Crystals of the ligand-free enzyme belonged to space group P2 1 2 1 2 1 and diffracted to 2.65 Å resolution, whereas complexes with CoA and its derivatives crystallized in space group P4 1 2 1 2 and diffracted to ∼2.0 Å resolution. PaaAC represents the first crystallized BMM hydroxylase that utilizes a CoA-linked substrate

  12. Comparison of thermal behavior of natural and hot-washed sisal fibers based on their main components: Cellulose, xylan and lignin. TG-FTIR analysis of volatile products

    Energy Technology Data Exchange (ETDEWEB)

    Benítez-Guerrero, Mónica, E-mail: monica_benitez_guerrero@yahoo.es [Departamento de Ingeniería Civil, Materiales y Fabricación, Universidad de Málaga, Escuela de Ingenierías, C/ Dr. Ortiz Ramos s/n, Campus Teatinos, 29071 Málaga (Spain); López-Beceiro, Jorge [Departamento de Ingeniería Industrial II, Escola Politécnica Superior, Universidade da Coruña, Avda. Mendizábal, 15403 Ferrol (Spain); Sánchez-Jiménez, Pedro E. [Instituto de Ciencia de Materiales de Sevilla, CSIC-Universidad de Sevilla, C/ Américo Vespucio 49, 41092 Sevilla (Spain); Pascual-Cosp, José [Departamento de Ingeniería Civil, Materiales y Fabricación, Universidad de Málaga, Escuela de Ingenierías, C/ Dr. Ortiz Ramos s/n, Campus Teatinos, 29071 Málaga (Spain)

    2014-04-01

    Highlights: • Thermal decomposition of sisal fibers has been discussed. • Decompositions of lignocellulosic components and sisal are compared by TXRD and TG-FTIR. • Hot washing reduces the temperature range in which sisal decomposition occurs. • Sisal cellulose decomposition goes by an alternative route to levoglucosan generation. - Abstract: This paper presents in a comprehensive way the thermal behavior of natural and hot-washed sisal fibers, based on the fundamental components of lignocellulosic materials: cellulose, xylan and lignin. The research highlights the influence exerted on the thermal stability of sisal fibers by other constituents such as non-cellulosic polysaccharides (NCP) and mineral matter. Thermal changes were investigated by thermal X-ray diffraction (TXRD), analyzing the crystallinity index (%Ic) of cellulosic samples, and by simultaneous thermogravimetric and differential thermal analysis coupled with Fourier-transformed infrared spectrometry (TG/DTA-FTIR), which allowed to examine the evolution of the main volatile compounds evolved during the degradation under inert and oxidizing atmospheres. The work demonstrates the potential of this technique to elucidate different steps during the thermal decomposition of sisal, providing extensible results to other lignocellulosic fibers, through the analysis of the evolution of CO{sub 2}, CO, H{sub 2}O, CH{sub 4}, acetic acid, formic acid, methanol, formaldehyde and 2-butanone, and comparing it with the volatile products from pyrolysis of the biomass components. The hydroxyacetaldehyde detected during pyrolysis of sisal is indicative of an alternative route to that of levoglucosan, generated during cellulose pyrolysis. Hot-washing at 75 °C mostly extracts non-cellulosic components of low decomposition temperature, and reduces the range of temperature in which sisal decomposition occurs, causing a retard in the pyrolysis stage and increasing Tb{sub NCP} and Tb{sub CEL}, temperatures at the

  13. Tackling the s-process stellar neutron density via the 147Pm(n,?) reaction

    CERN Multimedia

    Branching points along the reaction path of the slow nucleosynthesis process are very special isotopes for which there is competition between neutron capture and β-decay. The accurate knowledge of the decay properties and capture cross sections in the vicinity of these branching points are of key importance for determining the stellar conditions, namely the neutron density and temperature during the main s-process component in low-mass AGB stars. However, accurate values of these quantities, in particular capture cross sections at the corresponding stellar temperatures, are difficult to measure; thus data are very scarce and, when existing, very limited. For the particular and important case of the branching at A=147/148, the main branching point is $^{147}$Pm; for which there was a very challenging and successful activation measurement in 2003 at the stellar neutron energy of kT=25 keV using just 28 ng of material. In the main s-process, however, 95% of the neutron exposure takes place during H-burning epis...

  14. Influence of Laser Radiation Power Density on the Intensity of Spectral Lines for Main Components in a Clay Laser-Induced Plasma

    Science.gov (United States)

    Anufrik, S. S.; Kurian, N. N.; Znosko, K. F.; Belkov, M. V.

    2018-05-01

    We have studied the intensity of the spectral lines for the main components in clay: Al I 309.4 nm, Al II 358.7 nm, Mg II 279.6 nm, Ti II 323.6 nm vs. the position of the object relative to the focus of the optical system when the samples are exposed to single laser pulses from a YAG:Nd3+ laser. We have determined the permissible ranges for positioning the object relative to the focus of the optical system (positive and negative defocusing) for which there is practically no change in the reproducibility of the intensity for the spectral lines for red and white clay samples. We show that the position of the object relative to the focus of the optical system should be within the range ΔZ ±1.5 mm for optimal laser pulse energies for the analyte spectral lines. We have calculated the radiation flux density for different laser pulse energies and different distances from the focus to the object. We have shown experimentally that reducing the radiation flux density leads to a decrease in the intensity of the analyte spectral lines.

  15. Evaluation of the Use of Different Solvents to Extract the Four Main Components of Yinqiaosan and Their In Vitro Inhibitory Effects on Influenza-A Virus

    Directory of Open Access Journals (Sweden)

    Xuefeng Wang

    2010-04-01

    Full Text Available High-performance liquid chromatography coupled with an ultraviolet detector was used to quantitatively determine the amount of caffeoylquinic acid, arctium lappa glycoside, aurantiamarin and forsythin present in five solvent extracts (water, 30% ethanol, 50% ethanol, 70% ethanol and 95% ethanol of Yinqiaosan (YQS. The calibration curves of the four components were linear (r2 > 0.998 over the concentration range of 0.9–151.5 μg/mL. This method showed good repeatability with relative standard deviations of less than 2.9% and mean recoveries of 91.3–100.5%. We established the relative amounts of each of the four main ingredients in YQS for all five solvent extracts. The direct inhibitory effects of the five YQS extracts on influenza-A virus in vitro and the therapeutic effects on infected embryonated hen eggs were evaluated. YQS extracted in 50% ethanol and used at concentrations of 500mg/mL and 250mg/mL exerted the greatest therapeutic effect in infected embryonated hen eggs and was significantly superior to ribavirin (p < 0.05. Therefore, the 50% ethanol extract of YQS seems to be the most effective for the inhibition of influenza-A virus. Based on these results, further studies are warranted to evaluate the use of YQS extracts as a possible therapy for influenza.

  16. Characteristics and environmental fate of the anionic surfactant sodium lauryl ether sulphate (SLES) used as the main component in foaming agents for mechanized tunnelling

    International Nuclear Information System (INIS)

    Barra Caracciolo, Anna; Cardoni, Martina; Pescatore, Tanita; Patrolecco, Luisa

    2017-01-01

    The anionic surfactant sodium lauryl ether sulphate (SLES) is the main component of most commercial products used for soil conditioning in the excavation industry, in particular as lubricants for mechanized tunnelling. Its use during the excavation processes can result in either the subsequent possible re-use of the huge amount of soil debris as by-products (e.g. land covering) or its discharge as waste. Currently, there are neither SLES soil threshold limits in European legislation, nor comprehensive studies on the environmental risk for soil ecosystems in these exposure scenarios. In this context, the present paper reviews the available data on the intrinsic characteristics of persistence and the ecotoxicological effects of the anionic surfactant SLES. Although SLES is generally reported to be biodegradable in standard tests, with degradation rates between 7 h and 30 days, depending on the initial conditions, data on its biodegradation in environmental studies are quite scarce. Consequently, assessing SLES biodegradation rates in field conditions is crucial for evaluating if in residual concentrations (typically in the range 40–500 mg/kg in excavated soils) it can or not be a potential hazard for terrestrial and water organisms. Laboratory ecotoxicological tests pointed out detrimental effects of SLES for aquatic organisms, while data on the terrestrial species are rather poor so far and further studies at the expected environmental concentrations are necessary. Finally, the review reports the main analytical methods available for detecting anionic surfactants in solid matrices and the future research needed to improve knowledge on the possible environmental risks posed by the use of SLES in foaming agents for mechanized tunnelling. - Highlights: • Tons of excavated soil containing SLES are reused posing an environmental risk. • SLES can have detrimental effects on aquatic organisms exposed in lab test. • There is a need to improve knowledge on SLES

  17. Effects of clary sage oil and its main components, linalool and linalyl acetate, on the plasma membrane of Candida albicans: an in vivo EPR study.

    Science.gov (United States)

    Blaskó, Ágnes; Gazdag, Zoltán; Gróf, Pál; Máté, Gábor; Sárosi, Szilvia; Krisch, Judit; Vágvölgyi, Csaba; Makszin, Lilla; Pesti, Miklós

    2017-02-01

    The effects of clary sage (Salvia sclarea L.) oil (CS-oil), and its two main components, linalool (Lol) and linalyl acetate (LA), on cells of the eukaryotic human pathogen yeast Candida albicans were studied. Dynamic and thermodynamic properties of the plasma membrane were investigated by electron paramagnetic resonance (EPR) spectroscopy, with 5-doxylstearic acid (5-SASL) and 16-SASL as spin labels. The monitoring of the head group regions with 5-SASL revealed break-point frequency decrease in a temperature dependent manner of the plasma membrane between 9.55 and 13.15 °C in untreated, in CS-oil-, Lol- and LA-treated membranes. The results suggest a significant increase in fluidity of the treated plasma membranes close to the head groups. Comparison of the results observed with the two spin labels demonstrated that CS-oil and LA induced an increased level of fluidization at both depths of the plasma membrane. Whereas Lol treatment induced a less (1 %) ordered bilayer organization in the superficial regions and an increased (10 %) order of the membrane leaflet in deeper layers. Acute toxicity tests and EPR results indicated that both the apoptotic and the effects exerted on the plasma membrane fluidity depended on the composition and chemical structure of the examined materials. In comparison with the control, treatment with CS-oil, Lol or LA induced 13.0, 12.3 and 26.4 % loss respectively, of the metabolites absorbing at 260 nm, as a biological consequence of the plasma membrane fluidizing effects. Our results confirmed that clary sage oil causes plasma membrane perturbations which leads to cell apoptosis process.

  18. IN-VITRO evidence for the protective properties of the main components of the Mediterranean diet against colorectal cancer: A systematic review.

    Science.gov (United States)

    Rotelli, M T; Bocale, D; De Fazio, M; Ancona, P; Scalera, I; Memeo, R; Travaglio, E; Zbar, A P; Altomare, D F

    2015-09-01

    Epidemiological studies have shown that the incidence and mortality rates of colorectal cancer (CRC) vary over 10-fold worldwide where within Westernized societies lower rates are observed amongst populations living within the Mediterranean basin, suggesting a significant influence of environment and dietary style in CRC carcinogenesis. Interpretation of the data concerning the benefits of mediterranean (MD) diet is difficult in vivo because of the variability of alimentary regimens used, the differing compliance with dietary supplementation and because of the non-uniform duration of patient cohort observation. Therefore, the aim of this review is to evaluate the in-vitro effects on colorectal cancer cell lines. the literature concerning the in-vitro effects of 4 of the principal components symbolizing the MD such as olive oil (polyphenol), red chili (capsaicin), tomato (lycopene) and red grapes (resveratrol) have been systematically reviewed. Several studies have demonstrated that polyphenols form olive oil, lycopene, resveratrol and capsaicin have multiple anticancer properties affecting several metabolic pathways involved in cancerogenesis, apoptosis, and metastasis in CRC cell lines. This review summarizes some of the most recent data potentially supportive of the use of MD in CRC chemoprevention, analyzing the in vitro effects of individual components of the MD on CRC cell development, progression, metastasis and apoptosis. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Simultaneous analysis of 11 main active components in Cirsium setosum based on HPLC-ESI-MS/MS and combined with statistical methods.

    Science.gov (United States)

    Sun, Qian; Chang, Lu; Ren, Yanping; Cao, Liang; Sun, Yingguang; Du, Yingfeng; Shi, Xiaowei; Wang, Qiao; Zhang, Lantong

    2012-11-01

    A novel method based on high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry was developed for simultaneous determination of the 11 major active components including ten flavonoids and one phenolic acid in Cirsium setosum. Separation was performed on a reversed-phase C(18) column with gradient elution of methanol and 0.1‰ acetic acid (v/v). The identification and quantification of the analytes were achieved on a hybrid quadrupole linear ion trap mass spectrometer. Multiple-reaction monitoring scanning was employed for quantification with switching electrospray ion source polarity between positive and negative modes in a single run. Full validation of the assay was carried out including linearity, precision, accuracy, stability, limits of detection and quantification. The results demonstrated that the method developed was reliable, rapid, and specific. The 25 batches of C. setosum samples from different sources were first determined using the developed method and the total contents of 11 analytes ranged from 1717.460 to 23028.258 μg/g. Among them, the content of linarin was highest, and its mean value was 7340.967 μg/g. Principal component analysis and hierarchical clustering analysis were performed to differentiate and classify the samples, which is helpful for comprehensive evaluation of the quality of C. setosum. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. The Protective Effect of Lavender Essential Oil and Its Main Component Linalool against the Cognitive Deficits Induced by D-Galactose and Aluminum Trichloride in Mice

    Directory of Open Access Journals (Sweden)

    Pan Xu

    2017-01-01

    Full Text Available Lavender essential oil (LO is a traditional medicine used for the treatment of Alzheimer’s disease (AD. It was extracted from Lavandula angustifolia Mill. This study was designed to investigate the effects of lavender essential oil (LO and its active component, linalool (LI, against cognitive impairment induced by D-galactose (D-gal and AlCl3 in mice and to explore the related mechanisms. Our results revealed that LO (100 mg/kg or LI (100 mg/kg significantly protected the cognitive impairments as assessed by the Morris water maze test and step-though test. The mechanisms study demonstrated that LO and LI significantly protected the decreased activity of superoxide dismutase (SOD, glutathione peroxidase (GPX, and protected the increased activity of acetylcholinesterase (AChE and content of malondialdehyde (MDA. Besides, they protected the suppressed nuclear factor-erythroid 2-related factor 2 (Nrf2 and heme oxygenase-1 (HO-1 expression significantly. Moreover, the decreased expression of synapse plasticity-related proteins, calcium-calmodulin-dependent protein kinase II (CaMKII, p-CaMKII, brain-derived neurotrophic factor (BDNF, and TrkB in the hippocampus were increased with drug treatment. In conclusion, LO and its active component LI have protected the oxidative stress, activity of cholinergic function and expression of proteins of Nrf2/HO-1 pathway, and synaptic plasticity. It suggest that LO, especially LI, could be a potential agent for improving cognitive impairment in AD.

  1. Final environmental impact statement for the continued operation of the Pantex Plant and associated storage of nuclear weapon components. Volume 1 -- Main report

    International Nuclear Information System (INIS)

    1996-11-01

    This document assesses the potential environmental impacts over approximately 10 years of continued operation of Pantex Plant, including foreseeable projects and activities. For Pantex Plant, this document assesses the alternatives of No Action, Relocation of the storage of plutonium components (pits) resulting from nuclear weapon disassembly activities at Pantex Plant to another site, and the Proposed Action (Preferred Alternative) of continuing operations and increasing the quantity of pits in interim storage at Pantex Plant. For the Pit Storage Relocation Alternative, this document also assesses the potential environmental impacts to three DOE candidate sites and one Department of Defense candidate site that could be selected for the relocation of the nuclear component storage activities from Pantex Plant. Evaluations of site infrastructure, land resources, geology and soils, water resources, air quality, acoustics, biotic resources, cultural resources, socio-economic resources, intrasite transportation, waste management, human health, aircraft accidents, and environmental justice for Pantex Plant and the candidate sites are included in the assessment. The intersite transportation of nuclear and hazardous materials is also assessed

  2. Adjust of the residuals of the Arima model by means of the analysis of the residuals of the explanatory variables by means of the analysis of main components

    International Nuclear Information System (INIS)

    Bernal Suarez, Nestor Ricardo; Montealegre Bocanegra, Jose Edgar

    2000-01-01

    Based on the previous knowledge and understanding of the causality relationships between the fields of surface temperature of the Pacific and North and South tropical Atlantic oceans and rainfall behaviour in Colombia, we purport to model those relations with a (statistical) transfer model. This work is aimed at improving the adjustment of the model for the monthly mean rainfall registered in Funza (nearby the Capital Bogota). The residues of ARIMA models with six explanatory variables may contribute some percentage to the explanation of the total variability of rainfall as a consequence of their interrelationship. Such effect can be represented as a summary of the six variables, which can be achieved with principal components, taking into account that they are not mutually dependent, since they are white noise time series

  3. The {sup 13}C(α,n){sup 16}O reaction as a neutron source for the s-process in AGB low-mass stars

    Energy Technology Data Exchange (ETDEWEB)

    Trippella, O.; Busso, M. [INFN and University of Perugia, Perugia (Italy); La Cognata, M.; Spitaleri, C.; Guardo, G. L.; Lamia, L.; Puglia, S. M.R.; Romano, S.; Spartà, R. [INFN and University of Catania, Catania (Italy); Kiss, G. G. [Institute of Nuclear Research (ATOMKI), Debrecen (Hungary); Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D. [Department of Physics, Florida State University, Tallahassee, Florida (United States); Mukhamedzhanov, A. M. [Cyclotron Institute, Texas A and M University, College Station, Texas (United States); Maiorca, E. [INAF - Arcetri Astrophysical Observatory, Firenze (Italy); Palmerini, S. [Departamento de Fìsica Teòrica y del Cosmsos, Universidad de Granada,Granada (Spain)

    2014-05-09

    The {sup 13}C(α,n){sup 16}O reaction is considered to be the most important neutron source for producing the main component of the s-process in low mass stars. In this paper we focus our attention on two of the main open problems concerning its operation as a driver for the slow neutron captures. Recently, a new measurement of the {sup 13}C(α,n){sup 16}O reaction rate was performed via the Trojan Horse Method greatly increasing the accuracy. Contemporarily, on the modelling side, magnetic mechanisms were suggested to justify the production of the {sup 13}C pocket, thus putting the s-process in stars on safe physical ground. These inputs allow us to reproduce satisfactorily the solar distribution of elements.

  4. The 13C(α,n)16O reaction as a neutron source for the s-process in AGB low-mass stars

    International Nuclear Information System (INIS)

    Trippella, O.; Busso, M.; La Cognata, M.; Spitaleri, C.; Guardo, G. L.; Lamia, L.; Puglia, S. M.R.; Romano, S.; Spartà, R.; Kiss, G. G.; Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D.; Mukhamedzhanov, A. M.; Maiorca, E.; Palmerini, S.

    2014-01-01

    The 13 C(α,n) 16 O reaction is considered to be the most important neutron source for producing the main component of the s-process in low mass stars. In this paper we focus our attention on two of the main open problems concerning its operation as a driver for the slow neutron captures. Recently, a new measurement of the 13 C(α,n) 16 O reaction rate was performed via the Trojan Horse Method greatly increasing the accuracy. Contemporarily, on the modelling side, magnetic mechanisms were suggested to justify the production of the 13 C pocket, thus putting the s-process in stars on safe physical ground. These inputs allow us to reproduce satisfactorily the solar distribution of elements

  5. Evaluation of the energy component in the main grid tariff and the use of marginal loss rates; Evaluering av energileddet i sentralnettstariffen og bruk av marginaltapssatser

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerndal, Endre; Bjoerndal, Mette

    2010-11-15

    In this report, we make an evaluation of the energy component of the central grid tariff and the use of marginal loss rates. We will first review the theory of optimum transmission tariffs and describes how the marginal loss rates are calculated and how these are used in combination with the system price in the current transmission costs. We describe the trend in the Swedish marginal loss schedule, and we refer the very short development in the PJM area (U.S. east coast). As the Swedish and the Norwegian system is apparently based on the same principles, we problematize the lack of harmonization, since the systems actually are now very different. There is little doubt that Statnett has refined and improved methods for calculating the marginal loss rates, while ensuring that bottlenecks are still handled fairly easy by a few large price areas on Nord Pool Spot. We discuss the relationship between loss-tariff and congestion management, and we recommend that Statnett considering using the area price as the settlement price. This will make it much easier for operators to take account of losses. (Author)

  6. Capsular Polysaccharide is a Main Component of Mycoplasma ovipneumoniae in the Pathogen-Induced Toll-Like Receptor-Mediated Inflammatory Responses in Sheep Airway Epithelial Cells.

    Science.gov (United States)

    Jiang, Zhongjia; Song, Fuyang; Li, Yanan; Xue, Di; Deng, Guangcun; Li, Min; Liu, Xiaoming; Wang, Yujiong

    2017-01-01

    Mycoplasma ovipneumoniae ( M. ovipneumoniae ) is characterized as an etiological agent of primary atypical pneumonia that specifically infects sheep and goat. In an attempt to better understand the pathogen-host interaction between the invading M. ovipneumoniae and airway epithelial cells, we investigated the host inflammatory responses against capsular polysaccharide (designated as CPS) of M. ovipneumoniae using sheep bronchial epithelial cells cultured in an air-liquid interface (ALI) model. Results showed that CPS derived from M. ovipneumoniae could activate toll-like receptor- (TLR-) mediated inflammatory responses, along with an elevated expression of nuclear factor kappa B (NF- κ B), activator protein-1 (AP-1), and interferon regulatory factor 3 (IRF3) as well as various inflammatory-associated mediators, representatively including proinflammatory cytokines, such as IL1 β , TNF α , and IL8, and anti-inflammatory cytokines such as IL10 and TGF β of TLR signaling cascade. Mechanistically, the CPS-induced inflammation was TLR initiated and was mediated by activations of both MyD88-dependent and MyD88-independent signaling pathways. Of importance, a blockage of CPS with specific antibody led a significant reduction of M. ovipneumoniae -induced inflammatory responses in sheep bronchial epithelial cells. These results suggested that CPS is a key virulent component of M. ovipneumoniae , which may play a crucial role in the inflammatory response induced by M. ovipneumoniae infections.

  7. Capsular Polysaccharide is a Main Component of Mycoplasma ovipneumoniae in the Pathogen-Induced Toll-Like Receptor-Mediated Inflammatory Responses in Sheep Airway Epithelial Cells

    Directory of Open Access Journals (Sweden)

    Zhongjia Jiang

    2017-01-01

    Full Text Available Mycoplasma ovipneumoniae (M. ovipneumoniae is characterized as an etiological agent of primary atypical pneumonia that specifically infects sheep and goat. In an attempt to better understand the pathogen-host interaction between the invading M. ovipneumoniae and airway epithelial cells, we investigated the host inflammatory responses against capsular polysaccharide (designated as CPS of M. ovipneumoniae using sheep bronchial epithelial cells cultured in an air-liquid interface (ALI model. Results showed that CPS derived from M. ovipneumoniae could activate toll-like receptor- (TLR- mediated inflammatory responses, along with an elevated expression of nuclear factor kappa B (NF-κB, activator protein-1 (AP-1, and interferon regulatory factor 3 (IRF3 as well as various inflammatory-associated mediators, representatively including proinflammatory cytokines, such as IL1β, TNFα, and IL8, and anti-inflammatory cytokines such as IL10 and TGFβ of TLR signaling cascade. Mechanistically, the CPS-induced inflammation was TLR initiated and was mediated by activations of both MyD88-dependent and MyD88-independent signaling pathways. Of importance, a blockage of CPS with specific antibody led a significant reduction of M. ovipneumoniae-induced inflammatory responses in sheep bronchial epithelial cells. These results suggested that CPS is a key virulent component of M. ovipneumoniae, which may play a crucial role in the inflammatory response induced by M. ovipneumoniae infections.

  8. S-process krypton of variable isotopic composition in the Murchison meteorite

    Science.gov (United States)

    Ott, Urlich; Begemann, Friedrich; Yang, Yongmann; Epstein, Samuel

    1988-01-01

    Data are reported which, for the first time, permit the derivation of the full isotopic spectrum of s-process krypton with reasonable precision. It is shown that this s-Kr in a residue from the Murchison meteorite did not originate in one single s-process but rather is a mixture of contributions from stellar environments where the density of free neutrons was not the same. The astrophysical conditions under which this krypton was produced were distinct from those that have been invoked to explain the solar system s-process abundance. Similar to the C-13-rich carbon component in an aliquot of the same residue, the s-process Kr from different astrophysical sites has retained its identity during the accumulation and subsequent history of the meteorite.

  9. S-process krypton of variable isotopic composition in the Murchison meteorite

    International Nuclear Information System (INIS)

    Ott, U.; Begemann, F.; Yang, J.; Epstein, S.

    1988-01-01

    We report data that allow us to derive with reasonable precision the full isotopic spectrum of s-process krypton. We show that this s-Kr in a residue from Murchison meteorite did not originate in one single s-process but rather is a mixture of contributions from stellar environments where the density of free neutrons was not the same. The astrophysical conditions under which this krypton has been produced were distinct from those that have been invoked to explain the Solar System s-process abundance. Similar to the 13 C-rich carbon component in an aliquot of the same residue, the s-process Kr from different astrophysical sites has retained its identify during the accumulation and subsequent history of the meteorite. (author)

  10. Antibacterial activity and mechanism of action of Monarda punctata essential oil and its main components against common bacterial pathogens in respiratory tract.

    Science.gov (United States)

    Li, Hong; Yang, Tian; Li, Fei-Yan; Yao, Yan; Sun, Zhong-Min

    2014-01-01

    The aim of the current research work was to study the chemical composition of the essential oil of Monarda punctata along with evaluating the essential oil and its major components for their antibacterial effects against some frequently encountered respiratory infection causing pathogens. Gas chromatographic mass spectrometric analysis revealed the presence of 13 chemical constituents with thymol (75.2%), p-cymene (6.7%), limonene (5.4), and carvacrol (3.5%) as the major constituents. The oil composition was dominated by the oxygenated monoterpenes. Antibacterial activity of the essential oil and its major constituents (thymol, p-cymene, limonene) was evaluated against Streptococcus pyogenes, methicillin-resistant Staphylococcus aureus (MRSA), Streptococcus pneumoniae, Haemophilus influenzae and Escherichia coli. The study revealed that the essential oil and its constituents exhibited a broad spectrum and variable degree of antibacterial activity against different strains. Among the tested strains, Streptococcus pyogenes, Escherichia coli and Streptococcus pneumoniae were the most susceptible bacterial strain showing lowest MIC and MBC values. Methicillin-resistant Staphylococcus aureus was the most resistant bacterial strain to the essential oil treatment showing relatively higher MIC and MBC values. Scanning electron microscopy revealed that the essential oil induced potent and dose-dependent membrane damage in S. pyogenes and MRSA bacterial strains. The reactive oxygen species generated by the Monarda punctata essential oil were identified using 2', 7'-dichlorofluorescein diacetate (DCFDA).This study indicated that the Monarda punctata essential oil to a great extent and thymol to a lower extent triggered a substantial increase in the ROS levels in S. pyogenes bacterial cultures which ultimately cause membrane damage as revealed by SEM results.

  11. Sodium metabisulphite, a preservative agent, decreases the heart capillary volume and length, and curcumin, the main component of Curcuma longa, cannot protect it.

    Science.gov (United States)

    Noorafshan, A; Asadi-Golshan, R; Monjezi, S; Karbalay-Doust, S

    2014-01-01

    Sodium metabisulphite is used as an antioxidant agent in many pharmaceutical formulations. It is extensively used as a food preservative and disinfectant. It has been demonstrated that sulphite exposure can affect some organs. Curcumin, the main element of Curcuma longa, has been identified to have multiple protective properties. The present study extends the earlier works to quantitative evaluation of the effects of sulphite and curcumin on the heart structure using stereological methods. In this study, 28 rats were randomly divided into four experimental groups. The rats in groups I to IV received distilled water (group I), sodium metabisulphite (25 mg/ kg/day) (group II), curcumin (100 mg/kg/day) (group III), and sodium metabisulphite+curcumin (group IV), respectively, for 8 weeks. The left ventricle was subjected to stereological methods to estimate the quantitative parameters of the myocardium. A 20 % decrease was observed in the total volume of ventricular tissue in the sulphite-treated animals compared to the distilled water treatment (P curcumin did not protect the animals against the structural changes of the ventricle. Sulphite, as a preservative food agent, reduced the length and volume of the ventricular capillaries and curcumin could not protect them.

  12. Main findings

    International Nuclear Information System (INIS)

    2014-01-01

    Licensing regimes vary from country to country. When the license regime involves several regulators and several licenses, this may lead to complex situations. Identifying a leading organisation in charge of overall coordination including preparation of the licensing decision is a useful practice. Also, if a stepwise licensing process is implemented, it is important to fix in legislation decisions and/or time points and to identify the relevant actors. There is considerable experience in civil and mining engineering that can be applied when constructing a deep geological disposal facility. Specific challenges are, however, the minimization of disturbances to the host rock and the understanding of its long-term behavior. Construction activities may affect the geo-hydraulic and geochemical properties of the various system components which are important safety features of the repository system. Clearly defined technical specifications and an effective quality management plan are important in ensuring successful repository implementation which is consistent with safety requirements. Monitoring plan should also be defined in advance. The regulatory organization should prepare itself to the licensing review before construction by allocating sufficient resources. It should increase its competence, e.g., by interacting early with the implementer and through its own R and D. This will allow the regulator to define appropriate technical conditions associated to the construction license and to elaborate a relevant inspection plan of the construction work. After construction, obtaining the operational license is the most important and crucial step. Main challenges include (a) establishing sufficient confidence so that the methods for closing the individual disposal units comply with the safety objectives and (b) addressing the issue of ageing of materials during a 50-100 years operational period. This latter challenge is amplified when reversibility/retrievability is required

  13. Toxicity of the main electronic cigarette components, propylene glycol, glycerin, and nicotine, in Sprague-Dawley rats in a 90-day OECD inhalation study complemented by molecular endpoints.

    Science.gov (United States)

    Phillips, Blaine; Titz, Bjoern; Kogel, Ulrike; Sharma, Danilal; Leroy, Patrice; Xiang, Yang; Vuillaume, Grégory; Lebrun, Stefan; Sciuscio, Davide; Ho, Jenny; Nury, Catherine; Guedj, Emmanuel; Elamin, Ashraf; Esposito, Marco; Krishnan, Subash; Schlage, Walter K; Veljkovic, Emilija; Ivanov, Nikolai V; Martin, Florian; Peitsch, Manuel C; Hoeng, Julia; Vanscheeuwijck, Patrick

    2017-11-01

    While the toxicity of the main constituents of electronic cigarette (ECIG) liquids, nicotine, propylene glycol (PG), and vegetable glycerin (VG), has been assessed individually in separate studies, limited data on the inhalation toxicity of them is available when in mixtures. In this 90-day subchronic inhalation study, Sprague-Dawley rats were nose-only exposed to filtered air, nebulized vehicle (saline), or three concentrations of PG/VG mixtures, with and without nicotine. Standard toxicological endpoints were complemented by molecular analyses using transcriptomics, proteomics, and lipidomics. Compared with vehicle exposure, the PG/VG aerosols showed only very limited biological effects with no signs of toxicity. Addition of nicotine to the PG/VG aerosols resulted in effects in line with nicotine effects observed in previous studies, including up-regulation of xenobiotic enzymes (Cyp1a1/Fmo3) in the lung and metabolic effects, such as reduced serum lipid concentrations and expression changes of hepatic metabolic enzymes. No toxicologically relevant effects of PG/VG aerosols (up to 1.520  mg PG/L + 1.890 mg VG/L) were observed, and no adverse effects for PG/VG/nicotine were observed up to 438/544/6.6 mg/kg/day. This study demonstrates how complementary systems toxicology analyses can reveal, even in the absence of observable adverse effects, subtoxic and adaptive responses to pharmacologically active compounds such as nicotine. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  14. Stellar neutron sources and s-process in massive stars

    Science.gov (United States)

    Talwar, Rashi

    The s-process or the slow neutron capture process is a nucleosynthesis process taking place at relatively low neutron densities in stars. It runs along the valley of beta stability since the neutron capture rate is much slower compared to the beta decay rate. The s-process occurs mainly during core helium burning and shell carbon burning phase in massive stars and during thermally pulsing helium burning phase in asymptotic giant-branch stars. The potential stellar neutron source for the s-process is associated with alpha-capture reactions on light nuclei. The capture-reaction rates provide the reaction flow for the build-up of22Ne neutron source during the heliumburning phase in these stars. The low energy 26Mg resonances at stellar energies below 800 keV are predicted to have a critical influence on the alpha-capture rates on 22Ne. Some of these resonances may also correspond to pronounced alpha cluster structure near the alpha-threshold. However, these resonances have remained elusive during direct alpha capture measurements owing to the high Coulomb barrier and background from cosmic rays and beam induced reactions. Hence, in the present work, alpha-inelastic scattering and alpha- transfer measurements have been performed to probe the level structure of 26Mg nucleus in order to determine the 22Ne+alpha-capture rates. Both experiments have been performed using the high-resolution Grand Raiden Spectrometer at the Research Center for Nuclear Physics (RCNP), Osaka, Japan. For the alpha-inelastic scattering measurement, a self-supporting solid 26Mg target was used and for the alpha-transfer study via the (6Li,d) reaction, 22Ne gas enclosed in a gas cell with Aramid windows was used. The reaction products were momentum analysed by the spectrometer and detected at the focal plane equipped with two multi-wire drift chambers and two plastic-scintillation detectors. The focal plane detection system provided information on the position, the angle, the time of flight and

  15. Uncertainties in s-process nucleosynthesis in massive stars determined by Monte Carlo variations

    Science.gov (United States)

    Nishimura, N.; Hirschi, R.; Rauscher, T.; St. J. Murphy, A.; Cescutti, G.

    2017-08-01

    The s-process in massive stars produces the weak component of the s-process (nuclei up to A ˜ 90), in amounts that match solar abundances. For heavier isotopes, such as barium, production through neutron capture is significantly enhanced in very metal-poor stars with fast rotation. However, detailed theoretical predictions for the resulting final s-process abundances have important uncertainties caused both by the underlying uncertainties in the nuclear physics (principally neutron-capture reaction and β-decay rates) as well as by the stellar evolution modelling. In this work, we investigated the impact of nuclear-physics uncertainties relevant to the s-process in massive stars. Using a Monte Carlo based approach, we performed extensive nuclear reaction network calculations that include newly evaluated upper and lower limits for the individual temperature-dependent reaction rates. We found that most of the uncertainty in the final abundances is caused by uncertainties in the neutron-capture rates, while β-decay rate uncertainties affect only a few nuclei near s-process branchings. The s-process in rotating metal-poor stars shows quantitatively different uncertainties and key reactions, although the qualitative characteristics are similar. We confirmed that our results do not significantly change at different metallicities for fast rotating massive stars in the very low metallicity regime. We highlight which of the identified key reactions are realistic candidates for improved measurement by future experiments.

  16. Comparative analysis of main bio-active components in the herb pair Danshen-Honghua and its single herbs by ultra-high performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry.

    Science.gov (United States)

    Qu, Cheng; Pu, Zong-Jin; Zhou, Gui-Sheng; Wang, Jun; Zhu, Zhen-Hua; Yue, Shi-Jun; Li, Jian-Ping; Shang, Li-Li; Tang, Yu-Ping; Shi, Xu-Qin; Liu, Pei; Guo, Jian-Ming; Sun, Jing; Tang, Zhi-Shu; Zhao, Jing; Zhao, Bu-Chang; Duan, Jin-Ao

    2017-09-01

    A sensitive, reliable, and powerful ultra-high performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry method was developed for simultaneous quantification of the 15 main bio-active components including phenolic acids and flavonoids within 13 min for the first time. The proposed method was first reported and validated by good linearity (r 2  > 0.9975), limit of detection (1.12-7.01 ng/mL), limit of quantification (3.73-23.37 ng/mL), intra- and inter-day precisions (RSD ≤ 1.92%, RSD ≤ 2.45%), stability (RSD ≤ 5.63%), repeatability (RSD ≤ 4.34%), recovery (96.84-102.12%), and matrix effects (0.92-1.02). The established analytical methodology was successfully applied to comparative analysis of main bio-active components in the herb pair Danshen-Honghua and its single herbs. Compared to the single herb, the content of most flavonoid glycosides was remarkably increased in their herb pair, and main phenolic acids were decreased, conversely. The content changes of the main components in the herb pair supported the synergistic effects on promoting blood circulation and removing blood stasis. The results provide a scientific basis and reference for the quality control of Danshen-Honghua herb pair and the drug interactions based on variation of bio-active components in herb pairs. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Main Memory

    NARCIS (Netherlands)

    P.A. Boncz (Peter); L. Liu (Lei); M. Tamer Özsu

    2008-01-01

    htmlabstractPrimary storage, presently known as main memory, is the largest memory directly accessible to the CPU in the prevalent Von Neumann model and stores both data and instructions (program code). The CPU continuously reads instructions stored there and executes them. It is also called Random

  18. Dy163-Ho163 branching: an s-process barometer

    International Nuclear Information System (INIS)

    Beer, H.; Walter, G.; Macklin, R.L.

    1984-01-01

    The neutron capture cross sections of Dy163 and Er164 have been measured to analyze the s-process branching at Dy163-Ho163. The reproduction of the s-process abundance of Er164 via this branching is sensitive to temperature kT, neutron density, and electron density n/sub e/. The calculations using information from other branchings on kT and the neutron density n/sub n/ give constraints for n/sub e/ at the site of the s-process

  19. Main Memory

    OpenAIRE

    Boncz, Peter; Liu, Lei; Özsu, M.

    2008-01-01

    htmlabstractPrimary storage, presently known as main memory, is the largest memory directly accessible to the CPU in the prevalent Von Neumann model and stores both data and instructions (program code). The CPU continuously reads instructions stored there and executes them. It is also called Random Access Memory (RAM), to indicate that load/store instructions can access data at any location at the same cost, is usually implemented using DRAM chips, which are connected to the CPU and other per...

  20. Stellar neutron capture rates and the s process

    Directory of Open Access Journals (Sweden)

    Käppeler F.

    2012-02-01

    Full Text Available Neutron reactions are responsible for the formation of the elements heavier than iron. The corresponding scenarios relate to helium burning in Red Giant stars (s process and to supernova explosions (r and p processes. The s process, which operates in or near the valley of β-stability, has produced about half of the elemental abundances between Fe and Bi. Accurate (n, γ cross sections are the essential input for s process studies, because they determine the abundances produced by that process. Following a brief summary of the neutron capture processes, the focus will be set on the s process in massive stars, where the role of reliable cross section information is particularly important. Eventually, the intriguing aspects of the origin of 60Fe will be addressed. Attempts to determine the stellar cross section of that isotope are pushing experimental possibilities to their limits and present a pertinent challenge for future facilities.

  1. Origin of the solar system s-process abundances

    International Nuclear Information System (INIS)

    Malaney, R.A.; Boothroyd, A.I.

    1987-01-01

    In the search for the origin of the solar system s-process abundances much attention has been focused on the intershell zones of thermally pulsing asymptotic giant branch (AGB) stars. It has recently been suggested that, relative to the poor fits obtained from intermediate-mass AGB models, low-mass AGB models may result in much better fits to the observed solar system abundances. This suggestion was motivated by the high intershell base temperatures indicated by recent low-mass AGB calculations. Using new data, presented for the peak intershell base temperature in such stars, the s-process enhancements occurring in the intershell zones of low-mass AGB stars are calculated. A nonsolar distribution of s-process abundances is reported for all realistic AGB models studied. Other possible astrophysical sites for the origin of the solar system s-process abundances are discussed. 35 references

  2. R- and s-process nuclei in the early history of the galaxy: HD 122563

    International Nuclear Information System (INIS)

    Sneden, C.; Parthasarathy, M.

    1983-01-01

    New high-resolution, high signal-to-noise spectra in the blue and ultraviolet spectral regions have been obtained for the extremely metal-poor giant star HD 122563. A complete model atmosphere, spectrum synthesis analysis of this star has been performed, employing a large number of weak iron-peak species lines and laboratory oscillator strengths. Spectral features of many rare earth elements have been detected in the ultraviolet. The large overdeficiency of nearly a factor of 10 for the s-process element barium is confirmed and is shown to extend to the other s-process elements La, Ce, Pr, Nd, and Sm. The r-process elements Eu, Gd, Dy, and possibly Er and Yb are less deficient than the s-process elements but do exhibit lower ratios with respect to iron-peak elements than in the Sun. A supplementary differential analysis of HD 122563 with respect to the Sun shows that the heavy-element abundances are not very model-atmosphere dependent. The heavy-element abundances can be understood with nucleosynthesis models in which the progenitors of this star produce mainly r-process isotopes. A small contribution of the s-process to the creation of the elements Sr, Y, Zr, and possibly Ba is not ruled out, but such traditional s-process elements as La, Pr, and Nd appear to have been made in the r-process in stellar generations prior to the formation of HD 122563

  3. Investigation of the Effect of Rice Wine on the Metabolites of the Main Components of Herbal Medicine in Rat Urine by Ultrahigh-Performance Liquid Chromatography-Quadrupole/Time-of-Flight Mass Spectrometry: A Case Study on Cornus officinalis

    Directory of Open Access Journals (Sweden)

    Gang Cao

    2013-01-01

    Full Text Available Ultrahigh-performance liquid chromatography-quadrupole/time-of-flight mass spectrometry (UPLC-QTOF/MS was developed for rapid and sensitive analysis of the effect of rice wine on the metabolites of the main components of herbal medicine in rat urine. Using Cornus officinalis as a model of herbal medicine, the metabolite profiles of crude and processed (steaming the crude drug presteeped in rice wine Cornus officinalis extracts in rat urine were investigated. The metabolites of Cornus officinalis were identified by using dynamic adjustment of the fragmentor voltage to produce structure-relevant fragment ions. In this work, we identified the parent compounds and metabolites of crude and processed Cornus officinalis in rats. In total, three parent compounds and seventeen new metabolites of Cornus officinalis were found in rats. The contents of the parent compounds and metabolites in vivo varied significantly after intragastric (i.g. administration of aqueous extracts of crude and processed Cornus officinalis. Data from this study suggests that UPLC-QTOF/MS could be used as a potential tool for uncovering the effects of excipients found in the metabolites of the main components of herbal medicine, in vivo, to predict and discover the processing mechanisms of herbal medicine.

  4. Nuclear information needs for the astrophysical s-process

    Energy Technology Data Exchange (ETDEWEB)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1986-01-01

    The astrophysical s-process is a sequence of neutron-capture and beta-decay reactions on a slow time scale compared to beta-decay lifetimes near the line of stability. This detailed sequence of neutron capture, continuum and bound-state beta decay, positron decay, and electron-capture reactions that comprise the s-process has been studied for a broad range of astrophysical environments. The results are then compared with the solar-system abundancies of heavy elements to determine the range of physical conditions responsible for their nucleosynthesis. The nuclear data needs are extensive but have begun to be precise enough to allow for a consistent interpretation of the astrophysical site for the s-process.

  5. Nuclear information needs for the astrophysical s-process

    Energy Technology Data Exchange (ETDEWEB)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1985-05-01

    The astrophysical s-process is a sequence of neutron-capture and beta-decay reactions on a slow time scale compared to beta-decay lifetimes near the line of stability. We systematically study this detailed sequence of neutron capture, continuum and bound-state beta decay, positron decay, and electron-capture reactions that comprise the s-process for a broad range of astrophysical environments. Our results are then compared with the solar-system abundances of heavy elements to determine the range of physical conditions responsible for their nucleosynthesis. The nuclear data needs are extensive but have begun to be precise enough to allow for a consistent interpretation of the astrophysical site for the s-process.

  6. Main component analysis of nuclear magnetic resonance /sup 1/H and /sup 13/C quantitative spectra of hydrogenation products of tars from Kansk-Achinsk Achinsk and Cheremkhovsk coals

    Energy Technology Data Exchange (ETDEWEB)

    Kushnarev, D.F.; Polonov, V.M.; Donskikh, V.I.; Rokhina, E.F.; Kalabin, G.A.

    1986-03-01

    Possibility is discussed of examining nuclear magnetic resonance /sup 1/H and /sup 13/C quantitative spectra of coal tar hydrogenation products using main component factorial analysis and applying special mathematical methods of processing experimental data. Nuclear magnetic resonance spectra of hydrogenation products of low temperature Cheremkhovsk coal carbonization tar and rapid pyrolysis Kansk-Achinsk coal tar were obtained on a WP-200SY (Bruker) spectrometer at 50.3 and 200.1 MHz, respectively. Data processing was carried out on an ODRA-1304 computer. Comparative correlation of parameters are given of tars and hydrogenation products which consist of hydrogenation of aromatic cycles and destruction of alkyl substituents, and factorial loads on structural parameters of tar hydrogenation products. 11 references.

  7. Combination of {sup 13}C/{sup 113}Cd NMR, potentiometry, and voltammetry in characterizing the interactions between Cd and two models of the main components of soil organic matter

    Energy Technology Data Exchange (ETDEWEB)

    Lenoble, V. [IFRE PMSE 112, CEREGE (UMR 6635 CNRS/Universite Paul Cezanne), Aix-en-Provence (France); Universite du Sud Toulon Var, Laboratoire PROTEE, La Garde Cedex (France); Garnier, C. [Universite du Sud Toulon Var, Laboratoire PROTEE, La Garde Cedex (France); Universite Bordeaux I, ISM-LPTC (UMR CNRS 5255), Talence (France); Masion, A.; Garnier, J.M. [IFRE PMSE 112, CEREGE (UMR 6635 CNRS/Universite Paul Cezanne), Aix-en-Provence (France); Ziarelli, F. [CNRS, Federation des Sciences Chimiques de Marseille, Spectropole, Marseille cedex 20 (France)

    2008-01-15

    This work allowed the characterization of the Cd-binding sites of two compounds taken as models for exudates, the main components of soil organic matter (SOM). The studied compounds were exopolysaccharides (EPS), specifically exudates of roots (polygalacturonic acid) and of soil bacteria (Phytagel). Potentiometric acid-base titrations were performed and fitting of the obtained results indicated the presence of two main classes of acidic sites, defined by their pK{sub a} values, for both EPS but of a different nature when comparing the two compounds. The two studied exopolysaccharides presented different acidic/basic site ratios: 0.15 for Phytagel and 0.76 for polygalacturonic acid. Spectroscopic techniques ({sup 13}C/{sup 113}Cd NMR, FTIR) distinguished different Cd surroundings for each of the studied EPS, which is in agreement with the titration results. Furthermore, these analyses indicated the presence of -COOH and -OH groups in various proportions for each exopolysaccharide, which should be linked to their reactivity towards cadmium. Cadmium titrations (voltammetric measurements) also differentiated different binding sites for each compound and allowed the determination of the strength of the Cd-binding site of the EPS. Fitting of the results of such voltammetric measurements was performed using PROSECE (Programme d'Optimisation et de Speciation Chimique dans l'Environnement), a software coupling chemical speciation calculation and binding parameter optimization. The fitting, taking into account the Cd{sup 2+}/H{sup +} competition towards exopolysaccharides, confirmed the acid-base titrations and spectroscopic analyses by revealing two classes of binding sites: (i) one defined as a strong complexant regarding its Cd{sup 2+}-EPS association (logK = 9-10.4) and with basic functionality regarding H{sup +}-EPS association (pK{sub a} = 11.3-11.7), and (ii) one defined as a weak complexant (logK = 7.1-8.2) and with acidic functionality (pK{sub a} = 3

  8. The Role of Fe and Ni for S-process Nucleosynthesis and Innovative Nuclear Technologies

    CERN Document Server

    Giubrone, G; Perkowski, J; Andriamonje, S; Carrapico, C; Wallner, A; Vannini, G; Quesada, J M; Lederer, C; Tarrio, D; Berthier, B; Lozano, M; Krticka, M; Domingo-Pardo, C; Chiaveri, E; Jericha, E; Ferrari, A; Massimi, C; Avrigeanu, V; Martinez, T; Guerrero, C; Andrzejewski, J; Karadimos, D; Mendoza, E; Ganesan, S; Vlachoudis, V; Milazzo, P M; Cortes, G; Becares, V; Tain, J L; Variale, V; Quinones, J; Calvino, F; Kappeler, F; Gunsing, F; Gramegna, F; Colonna, N; Marrone, S; Lebbos, E; Paradela, C; Mastinu, P F; Vaz, P; Tassan-Got, L; Kadi, Y; Dillman, I; Cano-Ott, D; Brugger, M; Audouin, L; Fernandez-Ordonez, M; Sarmento, R; Becvar, F; Goncalves, I F; Martin-Fuertes, F; Cerutti, F; Pina, G; Mosconi, M; Tagliente, G; Duran, I; Berthoumieux, E; Praena, J; Ioannides, K; Weiss, C; Mirea, M; Gomez-Hornillos, M B; Vlastou, R; Calviani, M; Nolte, R; Mengoni, A; Gonzalez-Romero, E; Marganiec, J; Leeb, H; Heil, M; Meaze, M H; Pavlik, A; Belloni, F; Harrispopulos S

    2011-01-01

    The accurate measurement of neutron capture cross sections of all Fe and Ni isotopes is important for disentangling the contribution of the s-process and the r-process to the stellar nucleosynthesis of elements in the mass range 60 < A < 120. At the same time, Fe and Ni are important components of structural materials and improved neutron cross section data is relevant in the design of new nuclear systems. With the aim of obtaining improved capture data on all stable iron and nickel isotopes, a program of measurements has been launched at the CERN Neutron Time of Flight Facility n_TOF.

  9. The S-Process Branching-Point at 205PB

    Science.gov (United States)

    Tonchev, Anton; Tsoneva, N.; Bhatia, C.; Arnold, C. W.; Goriely, S.; Hammond, S. L.; Kelley, J. H.; Kwan, E.; Lenske, H.; Piekarewicz, J.; Raut, R.; Rusev, G.; Shizuma, T.; Tornow, W.

    2017-09-01

    Accurate neutron-capture cross sections for radioactive nuclei near the line of beta stability are crucial for understanding s-process nucleosynthesis. However, neutron-capture cross sections for short-lived radionuclides are difficult to measure due to the fact that the measurements require both highly radioactive samples and intense neutron sources. We consider photon scattering using monoenergetic and 100% linearly polarized photon beams to obtain the photoabsorption cross section on 206Pb below the neutron separation energy. This observable becomes an essential ingredient in the Hauser-Feshbach statistical model for calculations of capture cross sections on 205Pb. The newly obtained photoabsorption information is also used to estimate the Maxwellian-averaged radiative cross section of 205Pb(n,g)206Pb at 30 keV. The astrophysical impact of this measurement on s-process nucleosynthesis will be discussed. This work was performed under the auspices of US DOE by LLNL under Contract DE-AC52-07NA27344.

  10. s-PROCESSING IN AGB STARS REVISITED. II. ENHANCED {sup 13}C PRODUCTION THROUGH MHD-INDUCED MIXING

    Energy Technology Data Exchange (ETDEWEB)

    Trippella, O.; Busso, M.; Palmerini, S.; Maiorca, E. [Department of Physics, University of Perugia, and INFN, Section of Perugia, via A. Pascoli, I-06123 Perugia (Italy); Nucci, M. C., E-mail: oscar.trippella@fisica.unipg.it [Department of Mathematics and Informatics, University of Perugia, via Vanvitelli, I-06123 Perugia and INFN, Section of Perugia, via A. Pascoli, I-06123 Perugia (Italy)

    2016-02-20

    Slow neutron captures are responsible for the production of about 50% of elements heavier than iron, mainly occurring during the asymptotic giant branch phase of low-mass stars (1 ≲ M/M{sub ⊙} ≲ 3), where the main neutron source is the {sup 13}C(α, n){sup 16}O reaction. This last reaction is activated from locally produced {sup 13}C, formed by partial mixing of hydrogen into the He-rich layers. We present here the first attempt to describe a physical mechanism for the formation of the {sup 13}C reservoir, studying the mass circulation induced by magnetic buoyancy without adding new free parameters to those already involved in stellar modeling. Our approach represents the application to the stellar layers relevant for s-processing of recent exact analytical 2D and 3D models for magneto-hydrodynamic processes at the base of convective envelopes in evolved stars in order to promote downflows of envelope material for mass conservation during the occurrence of a dredge-up phenomenon. We find that the proton penetration is characterized by small concentrations, but is extended over a large fractional mass of the He-layers, thus producing {sup 13}C reservoirs of several 10{sup −3} M{sub ⊙}. The ensuing {sup 13}C-enriched zone has an almost flat profile, while only a limited production of {sup 14}N occurs. In order to verify the effects of our new findings we show how the abundances of the main s-component nuclei can be accounted for in solar proportions and how our large {sup 13}C-reservoir allows us to solve a few so far unexplained features in the abundance distribution of post-AGB objects.

  11. Determining the 13C(α, n)16O absolute cross section through the concurrent application of ANC and THM and astrophysical consequences for the s-process in AGB-LMSs.

    Science.gov (United States)

    Trippella, Oscar; La Cognata, Marco

    2018-01-01

    The 13C(α, n)16O reaction is considered to be the most important neutron source for the s-process main component in low-mass asymptotic giant branch stars. No direct experimental data exist at very low energies and measurements performed through direct techniques show inconsistent results, mostly in their absolute values. In this context, we reversed the usual normalization procedure combining two indirect approaches, the asymptotic normalization coefficient and the Trojan Horse Method, to unambiguously determine the absolute value of the 13C(α, n)16O astrophysical S(E)-factor in the most relevant energy-region for astrophysics. Adopting the new reaction rate for the n-source in the NEWTON s-process nucleosynthesis code, astrophysical calculations show only limited variations, less than 1%, for those nuclei whose production is considered to be totally due to slow neutron captures.

  12. Quantification of main and trace metal components in the fly ash of waste-to-energy plants located in Germany and Switzerland: An overview and comparison of concentration fluctuations within and between several plants with particular focus on valuable metals.

    Science.gov (United States)

    Haberl, Jasmin; Koralewska, Ralf; Schlumberger, Stefan; Schuster, Michael

    2018-05-01

    The elemental composition of fly ash from six waste-to-energy (WTE) plants in Germany and two WTE plants in Switzerland were analyzed. Samples were taken daily over a period of one month and mixed to a composite sample for each German plant. From two Swiss plants, two and three of these composite samples, respectively, were collected for different months in order to assess temporal differences between these months. In total, 61 elements, including rare earth elements, were analyzed using ICP-OES and ICP-MS. The analysis method was validated for 44 elements either by reference materials (BCR 176R and NIST 1633c) or analysis with both methods. Good recoveries, mostly ±10%, and high agreements between both methods were achieved. As long as no additives from flue gas cleaning were mixed with the fly ash, quite similar element contents were observed between all of the different incinerators. For most elements, the variations between the different months within the two Swiss plants were lower than differences between various plants. Especially main components show low variations between different months. To get a more detailed insight into temporal fluctuations within the mentioned Swiss plants, the concentrations of Zn, Pb, Cu, Cd, Sb, and Sn are presented over a period of three years (Jan. 2015 - Oct. 2017). The concentration profiles are based on weekly composite samples (consisting of daily taken samples) analyzed by the routine control of these plants using ED-XRF. The standard deviations of the average concentrations were around 20% over the three years for the regarded elements. The fluctuations were comparable at both plants. Due to the relatively low temporal concentration fluctuations observed within the plants, fly ash would be a continuous and constant source of secondary raw materials. Beside Zn, Pb, Cu, and Cd, which were already recovered on an industrial scale, Sb, Sn, and Bi also show a high potential as secondary raw material due to the high

  13. Main: FEB3 [TP Atlas

    Lifescience Database Archive (English)

    Full Text Available nt to sterilization and rinsing - One of the main components of biofilms is polysaccharides - Some pit-formi...ng bacteria such as Sphingomonas species A1 possess superchannels that directly incorporate and decompose polysaccharides - Detai...e entrance of the superchannel have been elucidated - We have obtained the crystals of ABC importer complexe...of water pipes and dental plaque are examples of biofilms. One of the main components of biofilms is polysac

  14. The neutron capture cross section of the ${s}$-process branch point isotope $^{63}$Ni

    CERN Multimedia

    Neutron capture nucleosynthesis in massive stars plays an important role in Galactic chemical evolution as well as for the analysis of abundance patterns in very old metal-poor halo stars. The so-called weak ${s}$-process component, which is responsible for most of the ${s}$ abundances between Fe and Sr, turned out to be very sensitive to the stellar neutron capture cross sections in this mass region and, in particular, of isotopes near the seed distribution around Fe. In this context, the unstable isotope $^{63}$Ni is of particular interest because it represents the first branching point in the reaction path of the ${s}$-process. We propose to measure this cross section at n_TOF from thermal energies up to 500 keV, covering the entire range of astrophysical interest. These data are needed to replace uncertain theoretical predicitons by first experimental information to understand the consequences of the $^{63}$Ni branching for the abundance pattern of the subsequent isotopes, especially for $^{63}$Cu and $^{...

  15. Report of the Commission to Study the Adequacy and Equity of Certain Cost Components of the School Funding Formula. Report to Joint Standing Committee on Education and Cultural Affairs, Maine State Legislature

    Science.gov (United States)

    Center for Education Policy, Applied Research, and Evaluation, 2015

    2015-01-01

    The Commission to Study the Adequacy and Equity of Certain Cost Components of the School Funding Formula was created in legislation crafted by the Joint Standing Committee on Education of the 126th Legislature (the "Education Committee"). The legislation was enacted as Resolve 2014, chapter 114. Creation of the Commission is the latest…

  16. The symbiotic star CI Cygni: S-process episode or accretion event

    International Nuclear Information System (INIS)

    Kenyon, S.J.; Webbink, R.F.; Gallagher, J.S.; Truran, J.W.

    1982-01-01

    Evidence that the symbiotic star C I Cygni is an eclipsing binary is reviewed. It is shown that the 's-process episode' described by Audouze et al. (1981) during its 1975 outburst arises from superposition of normal gM4 absorption features on the continuum of the hot component during eclipse ingress, and not to sudden enhancements of rare earth elements. The peculiar velocity displacements of absorption lines with different excitation potentials during this episode are identified as signatures of an optically thick accretion disk, which dominates the visible spectrum during outburst. The data presented by Audouze et al., and the shape of the light curve thus provide evidence that the outburst is accretion-powered. (orig.)

  17. Symbiotic star CI Cygni: S-process episode or accretion event

    Energy Technology Data Exchange (ETDEWEB)

    Kenyon, S J; Webbink, R F; Gallagher, J S; Truran, J W

    1982-02-01

    Evidence that the symbiotic star C I Cygni is an eclipsing binary is reviewed. It is shown that the s-process episode described by Audouze et al. (1981) during its 1975 outburst arises from superposition of normal gM4 absorption features on the continuum of the hot component during eclipse ingress, and not to sudden enhancements of rare earth elements. The peculiar velocity displacements of absorption lines with different excitation potentials during this episode are identified as signatures of an optically thick accretion disk, which dominates the visible spectrum during outburst. The data presented by Audouze et al., and the shape of the light curve thus provide evidence that the outburst is accretion-powered.

  18. Analysis of the influence of processing of stir-baking with glycyrrhizae on the main components of Euodiae Fructus by high-performance liquid chromatography with diode array detector.

    Science.gov (United States)

    Hu, Jue; Wu, Xin; Cao, Gang; Chen, Xiaocheng

    2014-01-01

    Euodiae Fructus is one of the most commonly used Chinese herbs in China. Specifically, the crude Euodiae Fructus and its processed products of Gancao Zhi Pin are used clinically for the treatment of different diseases. In order to improve the quality control standard and evaluate the crude and processed Euodiae Fructus, in this study, a simple and sensitive high-performance liquid chromatography-diode array detector method was developed for the simultaneous determination of five major compounds in Euodiae Fructus. The results indicated that the five components had significant linear relation (r(2) ≥ 0.9997) between the peak area and the injected concentration. The average recoveries of the five components were in the range from 97.38% to 102.56%. Overall intra- and inter-day variations were less than 1.36%. The developed method can be applied to the intrinsic quality control of crude and processed Euodiae Fructus.

  19. Engineering Design of KSTAR tokamak main structure

    International Nuclear Information System (INIS)

    Im, K.H.; Cho, S.; Her, N.I.

    2001-01-01

    The main components of the KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak including vacuum vessel, plasma facing components, cryostat, thermal shield and magnet supporting structure are in the final stage of engineering design. Hundai Heavy Industries (HHI) has been involved in the engineering design of these components. The current configuration and the final engineering design results for the KSTAR main structure are presented. (author)

  20. Use of Pinus sylvestris L. (Pinaceae), Origanum vulgare L. (Lamiaceae), and Thymus vulgaris L. (Lamiaceae) essential oils and their main components to enhance itraconazole activity against azole susceptible/not-susceptible Cryptococcus neoformans strains.

    Science.gov (United States)

    Scalas, Daniela; Mandras, Narcisa; Roana, Janira; Tardugno, Roberta; Cuffini, Anna Maria; Ghisetti, Valeria; Benvenuti, Stefania; Tullio, Vivian

    2018-05-03

    Cryptococcal infections, besides being a problem for immunocompromised patients, are occasionally being a problem for immunocompetent patients. In addition, the lower susceptibility of this yeast to azoles is a growing problem in health care. To date, there are very few molecules with any activity towards Cryptococcus neoformans, leading to heightened interest in finding new alternatives or adjuvants to conventional drugs for the treatment of mycosis caused by this yeast. Since the essential oils (EOs) are considered as a potential rich source of bioactive antimicrobial compounds, we evaluated the antifungal activity of Origanum vulgare (oregano), Pinus sylvestris (pine), and Thymus vulgaris (thyme red) EOs, and their components (α-pinene, carvacrol, thymol) compared with fluconazole, itraconazole, and voriconazole, against C.neoformans clinical strains. Then, we investigated the effect of EOs and components in combination with itraconazole. EO composition was analysed by Gas chromatography-mass spectrometry (GC-MS). A broth microdilution method was used to evaluate the susceptibility of C.neoformans to azoles, EOs and components. Checkerboard tests, isobolograms and time-kill assays were carried out for combination studies. Six C.neoformans isolates were susceptible to azoles, while one C.neoformans exhibited a reduced susceptibility to all tested azole drugs. All EOs exerted a good inhibitory activity against all C.neoformans strains. Pine EO was the most effective. Among components, thymol exerted the most remarkable activity. By checkerboard testing and isobolographic analysis, combinations of itraconazole with oregano, pine, or thyme EOs, and carvacrol were found to be synergistic (FICI≤0.5) against azole susceptible C.neoformans. Regarding the azole not susceptible C.neoformans strain, the synergistic effect with itraconazole was observed with thyme EO (chemotype: thymol 26.52%; carvacrol 7.85%), and carvacrol. Time-kill assays confirmed the synergistic

  1. In vitro and in vivo bactericidal activity of Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo and its main effective component, palmatine, against porcine Helicobacter pylori

    OpenAIRE

    Rong, Qian; Xu, Min; Dong, Qi; Zhang, Yuli; Li, Yinglun; Ye, Gang; Zhao, Ling

    2016-01-01

    Background Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo (TSG) is a traditional Chinese herb that has been used for the treatment of upper respiratory tract infection and has anti-bacterial and anti-ulcer activity. Our study investigated the bactericidal effects of TSG and its major component, palmatine, against a Helicobacter pylori (H. pylori) strain isolated from pig and the standard strain H. pylori SS1 in vitro and in vivo. Methods H. pylori was isolated from pig and na...

  2. In vitro and in vivo bactericidal activity of Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo and its main effective component, palmatine, against porcine Helicobacter pylori.

    Science.gov (United States)

    Rong, Qian; Xu, Min; Dong, Qi; Zhang, Yuli; Li, Yinglun; Ye, Gang; Zhao, Ling

    2016-08-30

    Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo (TSG) is a traditional Chinese herb that has been used for the treatment of upper respiratory tract infection and has anti-bacterial and anti-ulcer activity. Our study investigated the bactericidal effects of TSG and its major component, palmatine, against a Helicobacter pylori (H. pylori) strain isolated from pig and the standard strain H. pylori SS1 in vitro and in vivo. H. pylori was isolated from pig and named H. pylori SCYA201401. For in vitro experiments, the inhibitory activity of TSG and palmatine against H. pylori SCYA201401 and H. pylori SS1 were tested by use of the agar cup diffusion technique. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) were determined from the absence of H. pylori colonies on agar plates. Time-kill curves were used to evaluate bactericidal activity; the average number of colonies was calculated at 0 to 48 h after liquid incubation, with concentrations of drugs at 0.5, 1, and 2 × MIC. For in vivo experiments, H. pylori SCYA201401-infected mice were randomly divided into TSG, palmatine, triple therapy (omeprazole, clarithromycin, and amoxicillin), blank control, and model groups. The eradication ratios were determined by use of rapid urease tests and bacterial culture. In vitro, the MIC and MBC of TSG against H. pylori SCYA201401 and SS1 were both 6250 μg/mL, whereas palmatine against H. pylori SCYA201401 was 6.25 μg/mL and against H. pylori SS1 was 3.12 μg/mL. The time-kill curves showed a dose-dependent, progressive decline in the numbers of viable bacteria up to 40 h. In vivo, the eradication ratios in the TSG and palmatine groups of mice were 80 and 50 % compared with 70 % in the triple-therapy group. TSG and its major component, palmatine, have bactericidal activity against H. pylori in vitro and in vivo. The possibility that TSG or palmatine can be effective in the treatment of human and animals H. pylori

  3. R and D thermochemical I-S process at JAERI

    International Nuclear Information System (INIS)

    Onuki, K.; Kubo, S.; Nakajima, H.; Higashi, S.; Kasahara, S.; Ishiyama, S.; Okuda, H.

    2004-01-01

    The Japan Atomic Energy Research Institute (JAERI) has conducted a study on the thermochemical water-splitting process of the iodine-sulfur family (IS process). In the IS process, water will react with iodine and sulfur dioxide to produce hydrogen iodide and sulfuric acid, which are then decomposed thermally to produce hydrogen and oxygen. High temperature nuclear heat, mainly supplied by a High Temperature Gas-cooled Reactor (HTGR), is used to drive the endothermic decomposition of sulfuric acid. JAERI has demonstrated the feasibility of the water-splitting hydrogen production process by carrying out laboratory-scale experiments in which combined operation of fundamental reactions and separations using the IS process was performed continuously. At present, the hydrogen production test is continuing, using a scaled-up glass apparatus. Corrosion-resistant materials for constructing a large-scale plant and process improvements by introducing advanced separation techniques, such as membrane separation, are under study. Future R and D items are discussed based on the present activities. (author)

  4. Influence of the main components of an electric-powered vehicle on its E/E architecture; Einfluss der Hauptkomponenten eines elektrischen Fahrzeugs auf seine E/E Architektur

    Energy Technology Data Exchange (ETDEWEB)

    Wagemann, Rolf; Holzmann, Frederic; Hack, Christine; Wagner, Gunnar [Intedis GmbH und Co.KG, Wuerzburg (Germany)

    2010-07-01

    The diminution of energy resources and the increase of CO{sub 2} emissions are high motivation for the willingness for developing electric vehicles. That is why we can see currently a huge range of vehicle concepts starting from different hybrids up to full electric vehicles with different performances. Electric driveline is already established in production and railway transportation but did not play a huge role in the vehicle transportation until today. Thus a significant jump transfer from energy technology to the world of vehicles has to done and to comply with the typical safety and reliability requirements of that domain. Beside the possibility to reach the zero emission targets, the new vehicle platform provides new innovation spectrum for vehicle construction. The E/E architecture is the core part of the vehicle platform by bringing together the new components and functions. Hereby the architecture has to provide a safe and convenient integration platform to the new technologies. A developing process, established at Intedis, starting with the definition fo safety and reliability requirements in parallel to general behavior and simulation of virtual proto-types ensures to achieve goal. (orig.)

  5. Neuroprotective Properties of the Standardized Extract from Camellia sinensis (Green Tea and Its Main Bioactive Components, Epicatechin and Epigallocatechin Gallate, in the 6-OHDA Model of Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    Natália Bitu Pinto

    2015-01-01

    Full Text Available Camellia sinensis (green tea is largely consumed, mainly in Asia. It possesses several biological effects such as antioxidant and anti-inflammatory properties. The objectives were to investigate the neuroprotective actions of the standardized extract (CS, epicatechin (EC and epigallocatechin gallate (EGCG, on a model of Parkinson’s disease. Male Wistar rats were divided into SO (sham-operated controls, untreated 6-OHDA-lesioned and 6-OHDA-lesioned treated for 2 weeks with CS (25, 50, or 100 mg/kg, EC (10 mg/kg, or EGCG (10 mg/kg groups. One hour after the last administration, animals were submitted to behavioral tests and euthanized and their striata and hippocampi were dissected for neurochemical (DA, DOPAC, and HVA and antioxidant activity determinations, as well as immunohistochemistry evaluations (TH, COX-2, and iNOS. The results showed that CS and catechins reverted behavioral changes, indicating neuroprotection manifested as decreased rotational behavior, increased locomotor activity, antidepressive effects, and improvement of cognitive dysfunction, as compared to the untreated 6-OHDA-lesioned group. Besides, CS, EP, and EGCG reversed the striatal oxidative stress and immunohistochemistry alterations. These results show that the neuroprotective effects of CS and its catechins are probably and in great part due to its powerful antioxidant and anti-inflammatory properties, pointing out their potential for the prevention and treatment of PD.

  6. Neutron capture cross section of $^{90}$Zr Bottleneck in the s-process reaction flow

    CERN Document Server

    Tagliente, G; Milazzo, P M; Moreau, C; Aerts, G; Abbondanno, U; Alvarez, H; Alvarez-Velarde, F; Andriamonje, Samuel A; Andrzejewski, J; Assimakopoulos, Panayiotis; Audouin, L; Badurek, G; Baumann, P; Bečvář, F; Berthoumieux, E; Bisterzo, S; Calviño, F; Calviani, M; Cano-Ott, D; Capote, R; Carrapiço, C; Cennini, P; Chepel, V; Chiaveri, Enrico; Colonna, N; Cortés, G; Couture, A; Cox, J; Dahlfors, M; David, S; Dillman, I; Domingo-Pardo, C; Dridi, W; Durán, I; Eleftheriadis, C; Embid-Segura, M; Ferrant, L; Ferrari, A; Ferreira-Marques, R; Furman, W; Gallino, R; Gonçalves, I; Gonzalez-Romero, E; Gramegna, F; Guerrero, C; Gunsing, F; Haas, B; Haight, R; Heil, M; Herrera-Martínez, A; Igashira, M; Jericha, E; Käppeler, F; Kadi, Y; Karadimos, D; Karamanis, D; Kerveno, M; Köhler, P; Kossionides, E; Krtička, M; Lamboudis, C; Leeb, H; Lindote, A; Lopes, I; Lozano, M; Lukic, S; Marganiec, J; Marrone, S; Martínez, T; Massimi, C; Mastinu, P; Mengoni, A; Mosconi, M; Neves, F; Oberhummer, Heinz; O'Brien, S; Pancin, J; Papachristodoulou, C; Papadopoulos, C; Paradela, C; Patronis, N; Pavlik, A; Pavlopoulos, P; Perrot, L; Pigni, M T; Plag, R; Plompen, A; Plukis, A; Poch, A; Praena, J; Pretel, C; Quesada, J; Rauscher, T; Reifarth, R; Rubbia, Carlo; Rudolf, G; Rullhusen, P; Salgado, J; Santos, J; Sarchiapone, L; Savvidis, I; Stéphan, C; Taín, J L; Tassan-Got, L; Tavora, L; Terlizzi, R; Vannini, G; Vaz, P; Ventura, A; Villamarín, D; Vincente, M, C; Vlachoudis, V; Vlastou, R; Voss, F; Walter, S; Wendler, H; Wiescher, M; Wisshak, K

    2008-01-01

    The neutron capture cross sections of the Zr isotopes have important implications in nuclear astrophysics and for reactor design. The small cross section of the neutron magic nucleus 90Zr, which accounts for more than 50% of natural zirconium represents one of the key isotopes for the stellar s-process, because it acts as a bottleneck in the neutron capture chain between the Fe seed and the heavier isotopes. The same element, Zr, also is an important component of the structural materials used in traditional and advanced nuclear reactors. The (n,γ) cross section has been measured at CERN, using the n_TOF spallation neutron source. In total, 45 resonances could be resolved in the neutron energy range below 70 keV, 10 being observed for the first time thanks to the high resolution and low backgrounds at n_TOF. On average, the Γγ widths obtained in resonance analyses with the R-matrix code SAMMY were 15% smaller than reported previously. By these results, the accuracy of the Maxwellian averaged cross section f...

  7. Main Memory DBMS

    NARCIS (Netherlands)

    P.A. Boncz (Peter); L. Liu (Lei); M. Tamer Özsu

    2008-01-01

    htmlabstractA main memory database system is a DBMS that primarily relies on main memory for computer data storage. In contrast, normal database management systems employ hard disk based persisntent storage.

  8. CHARACTERIZING THE HEAVY ELEMENTS IN GLOBULAR CLUSTER M22 AND AN EMPIRICAL s-PROCESS ABUNDANCE DISTRIBUTION DERIVED FROM THE TWO STELLAR GROUPS

    International Nuclear Information System (INIS)

    Roederer, I. U.; Marino, A. F.; Sneden, C.

    2011-01-01

    We present an empirical s-process abundance distribution derived with explicit knowledge of the r-process component in the low-metallicity globular cluster M22. We have obtained high-resolution, high signal-to-noise spectra for six red giants in M22 using the Magellan Inamori Kyocera Echelle spectrograph on the Magellan-Clay Telescope at Las Campanas Observatory. In each star we derive abundances for 44 species of 40 elements, including 24 elements heavier than zinc (Z = 30) produced by neutron-capture reactions. Previous studies determined that three of these stars (the 'r+s group') have an enhancement of s-process material relative to the other three stars (the 'r-only group'). We confirm that the r+s group is moderately enriched in Pb relative to the r-only group. Both groups of stars were born with the same amount of r-process material, but s-process material was also present in the gas from which the r+s group formed. The s-process abundances are inconsistent with predictions for asymptotic giant branch (AGB) stars with M ≤ 3 M ☉ and suggest an origin in more massive AGB stars capable of activating the 22 Ne(α,n) 25 Mg reaction. We calculate the s-process 'residual' by subtracting the r-process pattern in the r-only group from the abundances in the r+s group. In contrast to previous r- and s-process decompositions, this approach makes no assumptions about the r- and s-process distributions in the solar system and provides a unique opportunity to explore s-process yields in a metal-poor environment.

  9. Characterizing the Heavy Elements in Globular Cluster M22 and an Empirical s-process Abundance Distribution Derived from the Two Stellar Groups

    Science.gov (United States)

    Roederer, I. U.; Marino, A. F.; Sneden, C.

    2011-11-01

    We present an empirical s-process abundance distribution derived with explicit knowledge of the r-process component in the low-metallicity globular cluster M22. We have obtained high-resolution, high signal-to-noise spectra for six red giants in M22 using the Magellan Inamori Kyocera Echelle spectrograph on the Magellan-Clay Telescope at Las Campanas Observatory. In each star we derive abundances for 44 species of 40 elements, including 24 elements heavier than zinc (Z = 30) produced by neutron-capture reactions. Previous studies determined that three of these stars (the "r+s group") have an enhancement of s-process material relative to the other three stars (the "r-only group"). We confirm that the r+s group is moderately enriched in Pb relative to the r-only group. Both groups of stars were born with the same amount of r-process material, but s-process material was also present in the gas from which the r+s group formed. The s-process abundances are inconsistent with predictions for asymptotic giant branch (AGB) stars with M <= 3 M ⊙ and suggest an origin in more massive AGB stars capable of activating the 22Ne(α,n)25Mg reaction. We calculate the s-process "residual" by subtracting the r-process pattern in the r-only group from the abundances in the r+s group. In contrast to previous r- and s-process decompositions, this approach makes no assumptions about the r- and s-process distributions in the solar system and provides a unique opportunity to explore s-process yields in a metal-poor environment. This paper includes data gathered with the 6.5 m Magellan Telescopes located at Las Campanas Observatory, Chile.

  10. Main components of the corporative image of cultural organizations

    OpenAIRE

    Ramis Carrasco, María; Pérez Cabañero, Carmen

    2016-01-01

    [EN] In the present research, we carry out an analysis of the corporate image of a cultural organization which aims tohighlight its role in order to design management strategies in the cultural field. We investigate what particular attributes are better assessed by the public and which dimensions compose the corporate image of a cultural organization. Based on the literature review, we made an in-depth interview to the programming manager of a cultural organization...

  11. Determination of main components in lanthanum titanates blend

    International Nuclear Information System (INIS)

    Sizonenko, T.N.; Timchenko, A.K.

    1981-01-01

    Conditions for complexonometric determination of lanthanum in the presence of titanium using the disguising of the latter are studied. A method is suggested for lanthanum and titanium determination in a blend of lanthanum titanate which is used to grow monocrystals. Sulfosalicylic acid is chosen as a disguising agent. La has been determined by complexonometric titration using EDTA with xylenol orange in urotropin. The total contents of La and Ti have been determined by titration of EDTA excess with standard solution of zinc sulfate. Ti content has been calculated from the difference between the first two determinations. Reproducibility of Ti and La determination in the blend (n=21) is characterized by the following: at 19.73% La and 57.21% Ti there are (19.72+-0.16)% La and (57.10+-0.22)% Ti, Sr equals 0.0071 and 0.0034, respectively

  12. THE MAIN COMPONENTS OF SAFETY CULTURE IN AVIATION

    OpenAIRE

    Шостак, Оксана Григорівна; Пришупа, Юлія Юріївна

    2012-01-01

    The purpose of the article is to summarize, analyse and integrate the numerous reports and studies that have been conducted to define and assess safety culture, as well as the highly related concept of safety climate. This article will enable researchers and safety professionals to better understand and assess safety culture and that it will facilitate the sharing of information and strategies for improving safety culture across organizations and industries.

  13. TASKA-M exhaust system and its main components

    International Nuclear Information System (INIS)

    Kleefeldt, K.W.; Mueller, R.A.; Schramm, K.

    1985-01-01

    TASKA-M is a study for a mirror based D-T plasma device for fusion technology tests. Mature technology was applied whereever possible. The axial confinement time is relatively short, resulting in a large gas throughput compared to the fusion power level of 6.8 MW. The technological requirements of the exhaust system will not cause undue development problems in either of the two major areas: highly loaded dumps for the conversion of the escaping particle and plasma streams to thermal gas; vacuum pumping facilities. (orig.)

  14. Effects of a new 3-alpha reaction on the s-process in massive stars

    International Nuclear Information System (INIS)

    Kikuch, Yukihiro; Ono, Masaomi; Matsuo, Yasuhide; Hashimoto, Masa-aki; Fujimoto, Shin-ichiro

    2012-01-01

    Effect of a new 3-alpha reaction rate on the s-process during the evolution of a massive star of 25 solar mass is investigated for the first time, because the s-process in massive stars have been believed to be established with only minor change. We find that the s-process with use of the new rate during the core helium burning is very inefficient compared to the case with the previous 3-alpha rate. However, the difference of the overproduction is found to be largely compensated by the subsequent carbon burning. Since the s-process in massive stars has been attributed so far to the neutron irradiation during core helium burning, our finding reveals for the first time the importance of the carbon burning for the s-process during the evolution of massive stars.

  15. Maine's Employability Skills Program

    Science.gov (United States)

    McMahon, John M.; Wolffe, Karen E.; Wolfe, Judy; Brooker, Carrie

    2013-01-01

    This Practice Report describes the development and implementation of the "Maine Employability Skills Program," a model employment program developed by the Maine Division for the Blind and Visually Impaired (DBVI). The program was designed to support the efforts of the chronically unemployed or underemployed. These consumers were either…

  16. Turbine main engines

    CERN Document Server

    Main, John B; Herbert, C W; Bennett, A J S

    1965-01-01

    Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing ste

  17. Maine highway safety plan

    Science.gov (United States)

    2010-01-01

    Each September 1, the MeBHS must provide NHTSA a comprehensive plan to reduce : traffic crashes and resulting deaths, injuries and property damage. The Highway Safety : Plan (HSP) serves as Maines application for available federal funds for these ...

  18. Maine Field Station

    Data.gov (United States)

    Federal Laboratory Consortium — In 2000 NOAA's National Marine Fisheries Service established the Maine Field Station in Orono, ME to have more direct involvement in the conservation of the living...

  19. Maine's forests 2008

    Science.gov (United States)

    George L. McCaskill; William H. McWilliams; Charles J. Barnett; Brett J. Butler; Mark A. Hatfield; Cassandra M. Kurtz; Randall S. Morin; W. Keith Moser; Charles H. Perry; Christopher W. Woodall

    2011-01-01

    The second annual inventory of Maine's forests was completed in 2008 after more than 3,160 forested plots were measured. Forest land occupies almost 17.7 million acres, which represents 82 percent of the total land area of Maine. The dominant forest-type groups are maple/beech/yellow birch, spruce/fir, white/red/jack pine, and aspen/white birch. Statewide volume...

  20. Maine Forests 2013

    Science.gov (United States)

    George L. McCaskill; Thomas Albright; Charles J. Barnett; Brett J. Butler; Susan J. Crocker; Cassandra M. Kurtz; William H. McWilliams; Patrick D. Miles; Randall S. Morin; Mark D. Nelson; Richard H. Widmann; Christopher W. Woodall

    2016-01-01

    The third 5-year annualized inventory of Maine's forests was completed in 2013 after more than 3170 forested plots were measured. Maine contains more than 17.6 million acres of forest land, an area that has been quite stable since 1960, covering more than 82 percent of the total land area. The number of live trees greater than 1 inch in diameter are approaching 24...

  1. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  2. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  3. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  4. A main sequence for quasars

    Science.gov (United States)

    Marziani, Paola; Dultzin, Deborah; Sulentic, Jack W.; Del Olmo, Ascensión; Negrete, C. A.; Martínez-Aldama, Mary L.; D'Onofrio, Mauro; Bon, Edi; Bon, Natasa; Stirpe, Giovanna M.

    2018-03-01

    The last 25 years saw a major step forward in the analysis of optical and UV spectroscopic data of large quasar samples. Multivariate statistical approaches have led to the definition of systematic trends in observational properties that are the basis of physical and dynamical modeling of quasar structure. We discuss the empirical correlates of the so-called “main sequence” associated with the quasar Eigenvector 1, its governing physical parameters and several implications on our view of the quasar structure, as well as some luminosity effects associated with the virialized component of the line emitting regions. We also briefly discuss quasars in a segment of the main sequence that includes the strongest FeII emitters. These sources show a small dispersion around a well-defined Eddington ratio value, a property which makes them potential Eddington standard candles.

  5. A Main Sequence for Quasars

    Directory of Open Access Journals (Sweden)

    Paola Marziani

    2018-03-01

    Full Text Available The last 25 years saw a major step forward in the analysis of optical and UV spectroscopic data of large quasar samples. Multivariate statistical approaches have led to the definition of systematic trends in observational properties that are the basis of physical and dynamical modeling of quasar structure. We discuss the empirical correlates of the so-called “main sequence” associated with the quasar Eigenvector 1, its governing physical parameters and several implications on our view of the quasar structure, as well as some luminosity effects associated with the virialized component of the line emitting regions. We also briefly discuss quasars in a segment of the main sequence that includes the strongest FeII emitters. These sources show a small dispersion around a well-defined Eddington ratio value, a property which makes them potential Eddington standard candles.

  6. Main sequence mass loss

    International Nuclear Information System (INIS)

    Brunish, W.M.; Guzik, J.A.; Willson, L.A.; Bowen, G.

    1987-01-01

    It has been hypothesized that variable stars may experience mass loss, driven, at least in part, by oscillations. The class of stars we are discussing here are the δ Scuti variables. These are variable stars with masses between about 1.2 and 2.25 M/sub θ/, lying on or very near the main sequence. According to this theory, high rotation rates enhance the rate of mass loss, so main sequence stars born in this mass range would have a range of mass loss rates, depending on their initial rotation velocity and the amplitude of the oscillations. The stars would evolve rapidly down the main sequence until (at about 1.25 M/sub θ/) a surface convection zone began to form. The presence of this convective region would slow the rotation, perhaps allowing magnetic braking to occur, and thus sharply reduce the mass loss rate. 7 refs

  7. Rotational mixing in carbon-enhanced metal-poor stars with s-process enrichment

    Science.gov (United States)

    Matrozis, E.; Stancliffe, R. J.

    2017-10-01

    Carbon-enhanced metal-poor (CEMP) stars with s-process enrichment (CEMP-s) are believed to be the products of mass transfer from an asymptotic giant branch (AGB) companion, which has long since become a white dwarf. The surface abundances of CEMP-s stars are thus commonly assumed to reflect the nucleosynthesis output of the first AGB stars. We have previously shown that, for this to be the case, some physical mechanism must counter atomic diffusion (gravitational settling and radiative levitation) in these nearly fully radiative stars, which otherwise leads to surface abundance anomalies clearly inconsistent with observations. Here we take into account angular momentum accretion by these stars. We compute in detail the evolution of typical CEMP-s stars from the zero-age main sequence, through the mass accretion, and up the red giant branch for a wide range of specific angular momentum ja of the accreted material, corresponding to surface rotation velocities, vrot, between about 0.3 and 300 kms-1. We find that only for ja ≳ 1017 cm2s-1 (vrot > 20 kms-1, depending on mass accreted) angular momentum accretion directly causes chemical dilution of the accreted material. This could nevertheless be relevant to CEMP-s stars, which are observed to rotate more slowly, if they undergo continuous angular momentum loss akin to solar-like stars. In models with rotation velocities characteristic of CEMP-s stars, rotational mixing primarily serves to inhibit atomic diffusion, such that the maximal surface abundance variations (with respect to the composition of the accreted material) prior to first dredge-up remain within about 0.4 dex without thermohaline mixing or about 0.5-1.5 dex with thermohaline mixing. Even in models with the lowest rotation velocities (vrot ≲ 1 kms-1), rotational mixing is able to severely inhibit atomic diffusion, compared to non-rotating models. We thus conclude that it offers a natural solution to the problem posed by atomic diffusion and cannot be

  8. FERMILAB: Main Injector

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The Fermilab Main Injector (FMI) project is the centerpiece of the Laboratory's Fermilab III programme for the 1990s. Designed to support a luminosity of at least 5x10 31 cm -2 s -1 in the Tevatron collider, it will also provide new capabilities for rare neutral kaon decay and neutrino oscillation studies. The Fermilab Main Injector 8-150 GeV synchrotron is designed to replace the existing Main Ring which seriously limits beam intensities for the Tevatron and the antiproton production target. The project has passed several significant milestones and is now proceeding rapidly towards construction. The project received a $11.65M appropriation in 1992 and has been given $15M for the current fiscal year. Through the Energy Systems Acquisition Advisory Board (ESAAB) process, the US Department of Energy (DoE) has authorized funds for construction of the underground enclosure and service building where the Main Injector will touch the Tevatron, and to the preparation of bids for remaining project construction

  9. FERMILAB: Main Injector

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1993-06-15

    The Fermilab Main Injector (FMI) project is the centerpiece of the Laboratory's Fermilab III programme for the 1990s. Designed to support a luminosity of at least 5x10{sup 31} cm{sup -2} s{sup -1} in the Tevatron collider, it will also provide new capabilities for rare neutral kaon decay and neutrino oscillation studies. The Fermilab Main Injector 8-150 GeV synchrotron is designed to replace the existing Main Ring which seriously limits beam intensities for the Tevatron and the antiproton production target. The project has passed several significant milestones and is now proceeding rapidly towards construction. The project received a $11.65M appropriation in 1992 and has been given $15M for the current fiscal year. Through the Energy Systems Acquisition Advisory Board (ESAAB) process, the US Department of Energy (DoE) has authorized funds for construction of the underground enclosure and service building where the Main Injector will touch the Tevatron, and to the preparation of bids for remaining project construction.

  10. Main facts 1995

    International Nuclear Information System (INIS)

    1996-01-01

    This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, monitoring and plants operations

  11. Main designations and attributions

    International Nuclear Information System (INIS)

    2010-01-01

    The chapter presents the main designations and attributions of the LNMRI - Brazilian National Laboratory of Metrology of Ionizing Radiation, the Cooperative Center in Radiation Protection and Medical Preparations for Accidents with Radiation; the Treaty for fully banning of nuclear tests and the Regional Center for Training of IAEA

  12. Maine Bouguer Gravity Grid

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 2 kilometer Bouguer anomaly grid for the state of Maine. Number of columns is 197 and number of rows is 292. The order of the data is from the lower left to the...

  13. Main facts 1993

    International Nuclear Information System (INIS)

    1994-01-01

    This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, network analysis, information and informatic equipment

  14. Main challenges of residential areas

    Directory of Open Access Journals (Sweden)

    Oana Luca

    2017-06-01

    Full Text Available The present article is a position paper aiming to initiate a professional debate related to the aspects related to the urban dysfunctions leading to the wear of the residential areas. The paper proposes a definition of the wear process, identify the main causes leading to its occurrence and propose a number of solutions to neutralise the dysfunctions. The three wearing phases of residential areas components are emphasized, exploring their lifecycle. In order to perform the study of urban wear, the status of the residential areas components can be established and monitored, and also the variables of the function that can mathematically model the specific wear process may be considered. The paper is considered a first step for the model adjustment, to be tested and validated in the following steps. Based on the mathematical method and model, there can be created, in a potential future research, the possibility of determining the precarity degree for residential areas/neighbourhoods and cities, by minimising the subjective component of the analyses preceding the decision for renovation or regeneration.

  15. Renovating the Main Building

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    CERN's "Main Building" is exactly that. The Organization's central hub, with hundreds of staff and visitors passing through its doors every day, will soon be getting a well-earned facelift. Refurbishment work will proceed in phases, starting with the Salle des Pas Perdus, the concourse between the Council Chamber and the Main Auditorium. By the end of August, informal seating areas will be installed, electronic display panels will provide practical information and improved sound insulation will enhance conditions in the auditoria and surrounding meeting rooms.   In light green the area that will undergo the facelift. Work will start in July. The ground floor is home to the entrance to Restaurant No. 1, the bank, the post office, the travel agent, the Users Office, the Staff Association, the notice boards etc. Step up to the first floor to access CERN's largest lecture theatre, the Council Chamber and its "Pas Perdus" lobby. Everyone who works at or visits CERN i...

  16. Fermilab Main Injector plan

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1990-07-15

    The Fermilab Main Injector is the centrepiece of the 'Fermilab III' scheme to significantly upgrade the Laboratory's existing accelerator complex. The new accelerator is designed to provide increased particle beam levels to boost the collision rate in the Tevatron proton-antiproton collider (luminosity in excess of 5 x 10{sup 31} per sq cm per s) and, if approved, would provide increased flexibility in all areas of high energy physics research.

  17. Fermilab Main Injector plan

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The Fermilab Main Injector is the centrepiece of the 'Fermilab III' scheme to significantly upgrade the Laboratory's existing accelerator complex. The new accelerator is designed to provide increased particle beam levels to boost the collision rate in the Tevatron proton-antiproton collider (luminosity in excess of 5 x 10 31 per sq cm per s) and, if approved, would provide increased flexibility in all areas of high energy physics research

  18. Maine coast winds

    Energy Technology Data Exchange (ETDEWEB)

    Avery, Richard

    2000-01-28

    The Maine Coast Winds Project was proposed for four possible turbine locations. Significant progress has been made at the prime location, with a lease-power purchase contract for ten years for the installation of turbine equipment having been obtained. Most of the site planning and permitting have been completed. It is expect that the turbine will be installed in early May. The other three locations are less suitable for the project, and new locations are being considered.

  19. Project evaluation: main characteristics

    OpenAIRE

    Moutinho, Nuno

    2010-01-01

    — The evaluation process of real investment projects must consider not only the traditional financial approach, but also non-financial aspects. Non financial analysis can provide additional relevant information about projects. We investigate financial and non-financial areas most relevant in project appraisal. We present main critical success factors and areas of analysis that lead to the perception of project success. Finally, companies are segmented to verify its financial and non-financial...

  20. Marketing Maine Tablestock Potatoes

    OpenAIRE

    Berney, Gerald; Grajewski, Gregory; Hinman, Don; Prater, Marvin E.; Taylor, April

    2010-01-01

    The Marketing Services Division of USDA’s Agricultural Marketing Service (AMS) was asked by USDA’s Agricultural Research Service (ARS) National Program Leader and ARS’s New England Soil and Water Research Laboratory personnel to help with existing efforts to assist Maine fresh potato farmers in their search for alternative marketing strategies, and reverse the recent decline in the profitability of their operations. ARS researchers previously had conducted an exhaustive study defining possibl...

  1. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  2. Chemical evolution with rotating massive star yields - I. The solar neighbourhood and the s-process elements

    Science.gov (United States)

    Prantzos, N.; Abia, C.; Limongi, M.; Chieffi, A.; Cristallo, S.

    2018-05-01

    We present a comprehensive study of the abundance evolution of the elements from H to U in the Milky Way halo and local disc. We use a consistent chemical evolution model, metallicity-dependent isotopic yields from low and intermediate mass stars and yields from massive stars which include, for the first time, the combined effect of metallicity, mass loss, and rotation for a large grid of stellar masses and for all stages of stellar evolution. The yields of massive stars are weighted by a metallicity-dependent function of the rotational velocities, constrained by observations as to obtain a primary-like 14N behaviour at low metallicity and to avoid overproduction of s-elements at intermediate metallicities. We show that the Solar system isotopic composition can be reproduced to better than a factor of 2 for isotopes up to the Fe-peak, and at the 10 per cent level for most pure s-isotopes, both light ones (resulting from the weak s-process in rotating massive stars) and the heavy ones (resulting from the main s-process in low and intermediate mass stars). We conclude that the light element primary process (LEPP), invoked to explain the apparent abundance deficiency of the s-elements with A values of ^{12}C/^{13}C in halo red giants, which is rather due to internal processes in those stars.

  3. The s-process enrichment of the globular clusters M4 and M22

    Energy Technology Data Exchange (ETDEWEB)

    Shingles, Luke J.; Karakas, Amanda I.; Fishlock, Cherie K.; Yong, David; Da Costa, Gary S.; Marino, Anna F. [Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Hirschi, Raphael, E-mail: luke.shingles@anu.edu.au [Institute for the Physics and Mathematics of the Universe (WPI), University of Tokyo, 5-1-5 Kashiwanoha, 277-8583 Kashiwa (Japan)

    2014-11-01

    We investigate the enrichment in elements produced by the slow neutron-capture process (s-process) in the globular clusters M4 (NGC 6121) and M22 (NGC 6656). Stars in M4 have homogeneous abundances of Fe and neutron-capture elements, but the entire cluster is enhanced in s-process elements (Sr, Y, Ba, Pb) relative to other clusters with a similar metallicity. In M22, two stellar groups exhibit different abundances of Fe and s-process elements. By subtracting the mean abundances of s-poor from s-rich stars, we derive s-process residuals or empirical s-process distributions for M4 and M22. We find that the s-process distribution in M22 is more weighted toward the heavy s-peak (Ba, La, Ce) and Pb than M4, which has been enriched mostly with light s-peak elements (Sr, Y, Zr). We construct simple chemical evolution models using yields from massive star models that include rotation, which dramatically increases s-process production at low metallicity. We show that our massive star models with rotation rates of up to 50% of the critical (break-up) velocity and changes to the preferred {sup 17}O(α, γ){sup 21}Ne rate produce insufficient heavy s-elements and Pb to match the empirical distributions. For models that incorporate asymptotic giant branch yields, we find that intermediate-mass yields (with a {sup 22}Ne neutron source) alone do not reproduce the light-to-heavy s-element ratios for M4 and M22, and that a small contribution from models with a {sup 13}C pocket is required. With our assumption that {sup 13}C pockets form for initial masses below a transition range between 3.0 and 3.5 M {sub ☉}, we match the light-to-heavy s-element ratio in the s-process residual of M22 and predict a minimum enrichment timescale of between 240 and 360 Myr. Our predicted value is consistent with the 300 Myr upper limit age difference between the two groups derived from isochrone fitting.

  4. Effects of s-process branchings on stellar and meteoritic abundances

    International Nuclear Information System (INIS)

    Norman, E.B.; Lesko, K.T.; Crane, S.G.; Larimer, R.M.; Champagne, A.E.

    1985-12-01

    The level scheme and electromagnetic properties of 148 Pm have been studied using 149 Sm(d, 3 He) and 148 Nd(p,nγ) reactions. Combining these measurements with estimates for E2/M1 decay branching ratios leads to the tentative conclusion that 148 Pm/sup g,m/ are in thermal equilibrium during the s-process. The branch at 148 Pm then leads to an inferred s-process neutron density of 3 x 10 8 cm -3

  5. The importance of $^{22}$Ne($\\alpha$, n)$^{25}$Mg as s-process neutron source and the s-process thermometer $^{151}$Sm

    CERN Multimedia

    Leal, L C; Kitis, G; Guber, K H; Cox, J; Quaranta, A; Koehler, P E

    2002-01-01

    Neutron capture nucleosynthesis provides a sensitive tool for testing He burning scenarios in massive stars as well as in low mass AGB stars. During this phase of stellar evolution nuclei in the mass region between Fe and Bi are producted by the slow neutron capture process ($\\emph{s}$-process). Because of the relatively low neutron densities, neutron capture times are long compared to typical $\\beta$-half-lives. This implies that the reaction path follows the stability valley and that the resulting abundances are essentially determined by the respective neutron capture cross sections. Hence, these data represent the most important nuclear physics input for $\\emph{s}$-process studies. In general, laboratory measurements are required in the energy range 0.1 < E$_{n}$ < 300 keV in order to obtain reliable averages over the stellar Maxwell-Boltzmann distribution for thermal energies between kT=5 keV and 30 keV. The extremely high neutron flux, the energy resolution and the excellent duty factor make the nT...

  6. Summary of main points

    International Nuclear Information System (INIS)

    2006-01-01

    In conjunction with its 6. annual meeting, the WPDD in close co-operation with the FSC held a Topical session on 'Stakeholder Involvement in Decommissioning' on November 14, 2005. The session was attended by 36 participants totally representing 14 NEA member countries and 2 international organisations. Two keynote addresses were given at the Topical Session. The first one treated of what is needed for robust decisions and how to bring all stakeholders into the debate. In the second keynote address a summary was made on what have been said on stakeholder involvement in decommissioning during earlier meetings of the WPDD. The main part of the session was then devoted to views from different stakeholders regarding their role and their involvement. This part contained viewpoints from local communities (Kaevlinge in Sweden and Port Hope in Canada), authorities (Scottish Executive and CSNC) and operators (EDF from France and EWN from Germany). Case studies from the decommissioning of Dounrey in the UK and from Trojan and Main Yankee in the USA were presented in the end part of the Topical session followed by a summary and lessons learnt report by the Rapporteur. A detailed programme of the Topical session can be seen in Appendix 1

  7. TRIGA reactor main systems

    International Nuclear Information System (INIS)

    Boeck, H.; Villa, M.

    2007-01-01

    This module describes the main systems of low power (<2 MW) and higher power (≥2 MW) TRIGA reactors. The most significant difference between the two is that forced reactor cooling and an emergency core cooling system are generally required for the higher power TRIGA reactors. However, those TRIGA reactors that are designed to be operated above 3 MW also use a TRIGA fuel that is specifically designed for those higher power outputs (3 to 14 MW). Typical values are given for the respective systems although each TRIGA facility will have unique characteristics that may only be determined by the experienced facility operators. Due to the inherent wide scope of these research reactor facilities construction and missions, this training module covers those systems found at most operating TRIGA reactor facilities but may also discuss non-standard equipment that was found to be operationally useful although not necessarily required. (author)

  8. Stellar neutron capture rates – key data for the s process

    Directory of Open Access Journals (Sweden)

    Käppeler F.

    2013-12-01

    Full Text Available Neutron reactions are responsible for the formation of the elements heavier than iron. The corresponding scenarios relate to the He- and C- burning phases of stellar evolution (s process and to supernova explosions (r and p processes. The s process, which is characterized by low neutron densities, operates in or near the valley of β stability and has produced about half of the elemental abundances between Fe and Bi in the solar system and in the Universe. Because the s abundances are essentially determined by the (n, γ cross sections along the reaction path, accurate neutron data constitute the key input for s process studies. Important constraints for the physical conditions at the stellar sites can be inferred by comparison of the abundance patterns from current s-process models with solar system material or presolar grains. The experimental methods for the determination of stellar (n, γ rates are outlined at the example of recent cross section measurements and remaining quests will be discussed with respect to existing laboratory neutron sources and new developments.

  9. Developmental Changes in Children’s Processing of Redundant Modifiers in Definite Object Descriptions

    NARCIS (Netherlands)

    Koolen, Ruud; Krahmer, Emiel; Swerts, Marc

    2016-01-01

    This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (6 or 7, and 9 or 10 years old) were presented with pictures of sweets. In the first experiment (pairwise comparison), two

  10. Component-based development process and component lifecycle

    NARCIS (Netherlands)

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  11. The role of Fe and Ni for s-process nucleosynthesis in the early Universe and for innovative nuclear technologies

    CERN Multimedia

    Manousos, A; Heil, M; Plag, R

    The early universe was enriched in heavy elements by massive stars via their s- and r-process contributions. Ultra metal-poor stars were found to show abundance patterns that scale exactly with the solar r component. While this holds exactly for elements heavier than barium, there is still confusion about significant discrepancies in the mass region below A ${\\leq}$ 120. It is known that massive stars contribute significantly to the abundances between Fe and Zr. This so-called weak s-process component was found to exhibit large uncertainties due to the poorly known cross sections, especially in the Fe- i region. In view of this problem it is proposed to perform accurate state-of-the art measurements on highly enriched samples of the stable Fe and Ni isotopes at the n_TOF facility. Transformation of these results into significantly improved stellar cross section rates will allow to disentangle the s and r contributions observed in the oldest stars for a reliable comparison with galactic chemical evolution mode...

  12. Prospects for direct neutron capture measurements on s-process branching point isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero, C.; Lerendegui-Marco, J.; Quesada, J.M. [Universidad de Sevilla, Dept. de Fisica Atomica, Molecular y Nuclear, Sevilla (Spain); Domingo-Pardo, C. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Kaeppeler, F. [Karlsruhe Institute of Technology, Institut fuer Kernphysik, Karlsruhe (Germany); Palomo, F.R. [Universidad de Sevilla, Dept. de Ingenieria Electronica, Sevilla (Spain); Reifarth, R. [Goethe-Universitaet Frankfurt am Main, Frankfurt am Main (Germany)

    2017-05-15

    The neutron capture cross sections of several unstable key isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure directly due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n, γ) measurement, where high neutron fluxes and effective background rejection capabilities are required. At present there are about 21 relevant s-process branching point isotopes whose cross section could not be measured yet over the neutron energy range of interest for astrophysics. However, the situation is changing with some very recent developments and upcoming technologies. This work introduces three techniques that will change the current paradigm in the field: the use of γ-ray imaging techniques in (n, γ) experiments, the production of moderated neutron beams using high-power lasers, and double capture experiments in Maxwellian neutron beams. (orig.)

  13. Past and Present of the s Process: a Nuclear Physicist's View

    International Nuclear Information System (INIS)

    Kaeppeler, F.

    2008-01-01

    The history of nuclear physics data for s-process calculations are briefly reviewed with emphasis on the actual status of the neutron capture cross sections. The remaining challenges will be illustrated and discussed in the light of new or optimized methods and state-of-the-art facilities, indicating the potential for accurate measurements and the possibility to study cross sections of radioactive isotopes. These opportunities will be considerably enriched by the enormous improvements provided by upcoming new facilities

  14. Binary stars as sources of iron and of s-process isotopes

    International Nuclear Information System (INIS)

    Iben, Icko Jr.; Bologna Univ.; Sussex Univ., Brighton

    1986-01-01

    Sources of elements and isotopes in stars, during the development of stars, is examined. The paper was presented to the conference on ''The early universe and its evolution'', Erice, Italy, 1986. Intermediate mass stars in their asymptotic giant branch phase of evolution as sources of carbon, merging white dwarfs as sources of iron, and helium star cataclysmics as sources of s-process elements, are all discussed. (U.K.)

  15. Principal components

    NARCIS (Netherlands)

    Hallin, M.; Hörmann, S.; Piegorsch, W.; El Shaarawi, A.

    2012-01-01

    Principal Components are probably the best known and most widely used of all multivariate analysis techniques. The essential idea consists in performing a linear transformation of the observed k-dimensional variables in such a way that the new variables are vectors of k mutually orthogonal

  16. Materiais usados na constituição dos principais componentes de células a combustível de óxido sólido Materials used in the manufacture of the main components of solid oxide fuel cells

    Directory of Open Access Journals (Sweden)

    A. C. Nascimento

    2009-03-01

    Full Text Available As células a combustível de óxido sólido (SOFC são dispositivos capazes de gerar energia elétrica com alta eficiência e baixa emissão de poluentes. As altas temperaturas de operação dessas células (600 a 1000 °C são benéficas no sentido de possibilitar a reforma in situ do combustível utilizado, bem como sua aplicação em sistemas de co-geração de energia, aumentando sua eficiência teórica total que pode chegar entre 80 e 85%. Entretanto, essas altas temperaturas, o contato direto entre materiais de constituições químicas diferentes e a utilização de gases redutores e oxidantes, são alguns dos fatores que impõem severas restrições aos materiais usados na preparação de seus principais componentes. O presente artigo tem como objetivo revisar o desenvolvimento do estado da arte, com relação aos materiais de ânodo, cátodo, eletrólito, interconectores e selantes, usados em SOFCs. Os requisitos necessários para o bom funcionamento de cada componente e os materiais que melhor se adequam aos mesmos são descritos. As vantagens e desvantagens dos principais materiais encontrados na literatura são também comentadas e comparadas.Solid oxide fuel cells (SOFC are devices capable to generate electricity with high efficiency and low emission of pollutants. The high operation temperatures of these batteries (600 to 1000 °C are advantageous, making possible the reform of the fuel used in situ as well as its application in systems for cogeneration of energy, increasing its total efficiency up to values between 80 and 85%. However, these high temperatures require severe restrictions on the materials used in the preparation of their main components. This paper aims to review the state of the art of the developed material as anode material, cathode, electrolyte, interconnects and seals, to be used in SOFCs. The requirements for a good operation of each component and the materials that best fit their specific need are described

  17. Independent component analysis: recent advances

    OpenAIRE

    Hyv?rinen, Aapo

    2013-01-01

    Independent component analysis is a probabilistic method for learning a linear transform of a random vector. The goal is to find components that are maximally independent and non-Gaussian (non-normal). Its fundamental difference to classical multi-variate statistical methods is in the assumption of non-Gaussianity, which enables the identification of original, underlying components, in contrast to classical methods. The basic theory of independent component analysis was mainly developed in th...

  18. Space Shuttle Main Propulsion System Anomaly Detection: A Case Study

    Data.gov (United States)

    National Aeronautics and Space Administration — The space shuttle main engine (SSME) is part of the Main Propnlsion System (MPS) which is an extremely complex system containing several sub-systems and components,...

  19. GCS component development cycle

    Science.gov (United States)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  20. Neutron capture at the s-process branching points $^{171}$Tm and $^{204}$Tl

    CERN Multimedia

    Branching points in the s-process are very special isotopes for which there is a competition between the neutron capture and the subsequent b-decay chain producing the heavy elements beyond Fe. Typically, the knowledge on the associated capture cross sections is very poor due to the difficulty in obtaining enough material of these radioactive isotopes and to measure the cross section of a sample with an intrinsic activity; indeed only 2 out o the 21 ${s}$-process branching points have ever been measured by using the time-of-flight method. In this experiment we aim at measuring for the first time the capture cross sections of $^{171}$Tm and $^{204}$Tl, both of crucial importance for understanding the nucleosynthesis of heavy elements in AGB stars. The combination of both (n,$\\gamma$) measurements on $^{171}$Tm and $^{204}$Tl will allow one to accurately constrain neutron density and the strength of the 13C(α,n) source in low mass AGB stars. Additionally, the cross section of $^{204}$Tl is also of cosmo-chrono...

  1. Interaction of calcium silicate hydrates (C-S-H), the main components of cement, with alkaline chlorides, analogy with clays; Interaction des silicates de calcium hydrates, principaux constituants du ciment, avec les chlorures d'alcalins. Analogie avec les argiles

    Energy Technology Data Exchange (ETDEWEB)

    Viallis-Terrisse, H

    2000-10-06

    This work, belonging to a more general study on the structure and reactivity of cement, deals with the experimental and theoretical analysis of the interaction of alkaline chlorides with calcium silicate hydrates (C-S-H), the main components of cement paste. The interaction of alkaline cations with C-S-H is interfacial, involving both electrostatic and surface complexation mechanisms. The C-S-H surface is constituted of silanol sites, partially dissociated due to the high pH of the interstitial solution. The calcium ions, present in large amounts in the equilibrium solution of C-S-H, constitute potential determining ions for the C-S-H surface. The alkaline ions seem to compete with calcium for the same surface sites. The adsorption isotherms show that caesium presents a better affinity than sodium and lithium for the C-S-H surface. Moreover, solid-state NMR suggests that caesium forms with the surface sites inner-sphere complexes, whereas sodium seems to keep its hydration sphere. These results are in agreement with zeta potential measurements, which let suppose a specific adsorption of caesium ions, and an indifferent behaviour of both other alkaline ions. A model for the C-S-H surface was proposed, from the electric double layer model, and mass action laws expressing the complexation of the different ionic species with the silanol sites. The whole study relies on a structural analogy with smectites, some clays presenting well-known cationic adsorption properties. The structural similarity between both minerals is enhanced by some similarities of reactivity, though significant behaviour differences could also be noted. (author)

  2. Economic Analysis for Nuclear Hydrogen Production System Based on HyS Process

    International Nuclear Information System (INIS)

    Yang, Kyeong Jin; Lee, Ki Young; Lee, Tae Hoon; Chang, Jong Hwa

    2009-01-01

    The current promising base for massive hydrogen production on high temperature environment derives primarily from three sources: the commercial production of chemicals for the sulfur-iodine (SI) process, the development of solid-oxide fuel cells (SOFC), and the hybrid method of chemicals and fuel cells. The three kinds of process requires high temperature heat energy over 850∼950 .deg. C for the efficient and economic hydrogen production. One of the clean, economic, and moreover promising heat sources supplied to the process is nuclear plants. The nuclear plants producing high temperature heat energy over 950 .deg. C are well known as Very High Temperature Reactors (VHTR) which could have two types of prismatic and pebble-bed cores along reactor core shape. In this paper, we report on the Hybrid Sulfur Process (HyS), and the estimated costs for the system which composes of VHTR of prismatic core type and HyS plant. Nuclear hydrogen production system based on HyS process has been configured to optimally use the thermal energy from VHTR and electric energy to produce hydrogen and oxygen from clean water. High temperature thermal energy is transferred to the HyS process by way of intermediate heat exchanger (IHX) with associated piping. In this paper, the hydrogen production costs for a system composed of a VHTR with six 600MWth module, a power conversion unit (PCU) and a HyS plant are presented, where the thermal energy produced in two module was converted to electric energy in PCU and then transferred to the electrolysis cells for hydrogen production and circulating units on HyS plant, and the remaining thermal energy was supplied to chemical process on HyS plants. As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GT-MHR are estimated in the necessary input data on a Korean specific basis. G4- ECONS was appropriately modified to calculate the cost for hydrogen production

  3. Impact of the uncertainty in α-captures on {sup 22}Ne on the weak s-process in massive stars

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, N. [Astrophysics group, EPSAM, Keele University, Keele, ST5 1BH, UK and NuGrid Project (United Kingdom); Hirschi, R. [Astrophysics group, EPSAM, Keele University, Keele, ST5 1BH, UK and Kavli IPMU (WPI), University of Tokyo, Kashiwa, 277-8583 (Japan); Pignatari, M. [NuGrid Project and Department of Physics, University of Basel, Basel, CH-4056 (Switzerland); Herwig, F. [NuGrid Project and Department of Physics and Astronomy, University of Victoria, Victoria, BC V8P5C2 (Canada); Beard, M. [NuGrid Project and Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Imbriani, G. [Dipartiment di Scienze Fisiche, Universita di Napoli Federico II, Napoli (Italy); Görres, J.; Boer, R. J. de; Wiescher, M. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States)

    2014-05-02

    Massive stars at solar metallicity contribute to the production of heavy elements with atomic masses between A = 60 and A = 90 via the so-called weak s-process (which takes place during core He and shell C burning phases). Furthermore, recent studies have shown that rotation boosts the s-process production in massive stars at low metallicities, with a production that may reach the barium neutron-magic peak. These results are very sensitive to neutron source and neutron poison reaction rates. For the weak s-process, the main neutron source is the reaction {sup 22}Ne(α,n){sup 25}Mg, which is in competition with {sup 22}Ne(α,γ){sup 26}Mg. The uncertainty of both rates strongly affects the nucleosynthesis predictions from stellar model calculations. In this study, we investigate the impact of the uncertainty in α-captures on {sup 22}Ne on the s-process nucleosynthesis in massive stars both at solar and at very low metallicity. For this purpose, we post-process, with the Nugrid mppnp code, non-rotating and rotating evolutionary models 25M{sub ⊙} stars at two different metallicities: Z = Z{sub ⊙} and Z = 10{sup −5}Z{sub ⊙}, respectively. Our results show that uncertainty of {sup 22}Ne(α,n){sup 25}Mg and {sup 22}Ne(α,γ){sup 26}Mg rates have a significant impact on the final elemental production especially for metal poor rotating models. Beside uncertainties in the neutron source reactions, for fast rotating massive stars at low metallicity we revisit the impact of the neutron poisoning effect by the reaction chain {sup 16}O(n,γ){sup 17}O(α,γ){sup 21}Ne, in competition with the {sup 17}O(α,n){sup 20}Ne, recycling the neutrons captured by {sup 16}O.

  4. Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Feng, Ling

    2008-01-01

    This dissertation concerns the investigation of the consistency of statistical regularities in a signaling ecology and human cognition, while inferring appropriate actions for a speech-based perceptual task. It is based on unsupervised Independent Component Analysis providing a rich spectrum...... of audio contexts along with pattern recognition methods to map components to known contexts. It also involves looking for the right representations for auditory inputs, i.e. the data analytic processing pipelines invoked by human brains. The main ideas refer to Cognitive Component Analysis, defined...... as the process of unsupervised grouping of generic data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. Its hypothesis runs ecologically: features which are essentially independent in a context defined ensemble, can be efficiently coded as sparse...

  5. The Fermilab Main Injector Technical Design Handbook

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1994-08-01

    This report contains a description of the design, cost estimate, and construction schedule of the Fermilab Main Injector (FMI) Project. The technical, cost, and schedule baselines for the FMI Project have already been established and may be found in the Fermilab Main Injector Title I Design Report, issued in August 1992. This report updates and expands upon the design and schedule for construction of all subsystem components and associated civil construction described in the Title I Design Report. The facilities described have been designed in conformance with DOE 6430.1A, "United States Department of Energy General Design Criteria."

  6. The (n, $\\gamma$) reaction in the s-process branching point $^{59}$Ni

    CERN Multimedia

    We propose to measure the $^{59}$Ni(n,$\\gamma$)$^{56}$Fe cross section at the neutron time of flight (n TOF) facility with a dedicated chemical vapor deposition (CVD) diamond detector. The (n, ) reaction in the radioactive $^{59}$Ni is of relevance in nuclear astrophysics as it can be seen as a rst branching point in the astrophysical s-process. Its relevance in nuclear technology is especially related to material embrittlement in stainless steel. There is a strong discrepancy between available experimental data and the evaluated nuclear data les for this isotope. The aim of the measurement is to clarify this disagreement. The clear energy separation of the reaction products of neutron induced reactions in $^{59}$Ni makes it a very suitable candidate for a rst cross section measurement with the CVD diamond detector, which should serve in the future for similar measurements at n_TOF.

  7. ON THE MEASUREMENT OF THE 13C(α, n)16O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

    International Nuclear Information System (INIS)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Guardo, G. L.; Puglia, S. M. R.; Romano, S.; Spartà, R.; Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D.; Mukhamedzhanov, A. M.; Lamia, L.

    2013-01-01

    The 13 C(α, n) 16 O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼ 8 K, corresponding to an energy interval where the 13 C(α, n) 16 O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in 17 O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the 13 C( 6 Li, n 16 O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the 13 C(α, n) 16 O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde α 13 C 17O(1/2+)2 = 7.7 ± 0.3 stat -1.5 +1. |6 norm fm –1 , yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the 13 C(α, n) 16 O reaction rate below about 8 × 10 7 K if compared with the recommended values. At ∼10 8 K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach

  8. Space shuttle main engine vibration data base

    Science.gov (United States)

    Lewallen, Pat

    1986-01-01

    The Space Shuttle Main Engine Vibration Data Base is described. Included is a detailed description of the data base components, the data acquisition process, the more sophisticated software routines, and the future data acquisition methods. Several figures and plots are provided to illustrate the various output formats accessible to the user. The numerous vibration data recall and analysis capabilities available through automated data base techniques are revealed.

  9. Measurement of the −3 keV resonance in the 13C(α,n)16O reaction and its influence on the synthesis of s-process nuclei

    International Nuclear Information System (INIS)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Rogachev, G. V.; Mukhamedzhanov, A. M.; Avila, M.; Guardo, G. L.; Koshchiy, E.; Kuchera, A.; Lamia, L.; Puglia, S. M. R.; Romano, S.; Santiago, D.; Spartà, R.

    2012-01-01

    The 13 C(α,n) 16 O reaction is the neutron source for the main component of the s-process, responsible of the production of most nuclei in the mass range 90 8 K, corresponding to an energy interval where the 13 C(α,n) 16 O is effective of 140 - 230 keV. In this region, the astrophysical S(E)-factor is dominated by the −3 keV sub-threshold resonance due to the 6.356 MeV level in 17 O, giving rise to a steep increase of the S-factor. Notwithstanding that it plays a crucial role in astrophysics, no direct measurements exist. Therefore, we have applied the Trojan Horse Method (THM) to the 13 C( 6 Li,n 16 O)d quasi-free reaction to achieve an experimental estimate of such contribution. For the first time, the ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing to attain an unprecedented accuracy in the 13 C(α,n) 16 O study. Though a larger ANC for the 6.356 MeV level is measured, our experimental S(E) factor agrees with the most recent extrapolation in the literature in the 140 - 230 keV energy interval, the accuracy being greatly enhanced thanks to this innovative approach.

  10. Space Shuttle main engine product improvement

    Science.gov (United States)

    Lucci, A. D.; Klatt, F. P.

    1985-01-01

    The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

  11. Neutron capture in 122,123,124Te: A critical test for s-process studies

    International Nuclear Information System (INIS)

    Wisshak, K.; Voss, F.; Kaeppeler, F.; Reffo, G.

    1991-11-01

    The neutron capture cross sections of 122,123,124,125,126 Te were measured in the energy range from 10 to 200 keV at the Karlsruhe Van de Graaff accelerator using gold as a standard. Neutrons were produced via the 7 Li(p,n) 7 Be reaction by bombarding metallic Li targets with a pulsed proton beam. Capture events were registered with the Karlsruhe 4π Barium Fluoride Detector. Several runs have been performed under different experimental conditions to study the systematic uncertainties in detail. The cross section ratios were determined with an overall uncertainty of ∝ 1%. This is an improvement by about a factor of five compared to the existing data. Maxwellian averaged neutron capture cross sections were calculated for thermal energies between kT=10 and 100 keV by normalizing the cross section shape up to 600 keV neutron energy reported in literature to the present data. These stellar cross sections were used in an s-process analysis. With the classical approach the abundances of the three s-only isotopes 122,123,124 Te could be reproduced within the experimental uncertainties of ∝ 1%. The accuracy of the present data allowed also to derive constraints for the existing stellar models with respect to the effective neutron density. Furthermore, the p-process abundances for the tellurium isotopes are discussed. (orig.) [de

  12. Recent results in explosive and s-process nucleosynthesis from measurements on radioactive and stable targets

    International Nuclear Information System (INIS)

    Koehler, P.E.; Kaeppeler, F.; Schatz, H.

    1993-01-01

    Measurements of (n,p) and (n,α) cross sections are crucial for a better understanding of many scenarios of nucleosynthesis. Current problems in which such reactions play a roll include the possible synthesis of heavy element during the big bang. The production of several rare isotopes in explosive nucleosynthesis, and a better understanding of the role of the s process in the synthesis of light and intermediate mass nuclei. We have recently completed measurements of several (n,p) and (n,α) cross sections of importance to nuclear astrophysics. The cross sections were measured in the range from thermal energy to approximately 1 MeV by using the white neutron source at the Manuel Lujan, Jr. Neutron Scattering Center (LANSCE) in Los Alamos. We have also made complementary measurements at the Karlsruhe Van de Graaff and at thee Oak Ridge Electron Linear Accelerator (ORELA). We discuss the impact of the results on nuclear astrophysics as well as recent improvements and future plans

  13. Socio-emotionally Significant Experience and Children’s Processing of Irrelevant Auditory Stimuli

    Science.gov (United States)

    Schermerhorn, Alice C.; Bates, John E.; Puce, Aina; Molfese, Dennis L.

    2017-01-01

    Theory and research indicate considerable influence of socio-emotionally significant experiences on children’s functioning and adaptation. In the current study, we examined neurophysiological correlates of children’s allocation of information processing resources to socio-emotionally significant events, specifically, simulated marital interactions. We presented 9- to 11-year-old children (n = 24; 11 females) with 15 videos of interactions between two actors posing as a married couple. Task-irrelevant brief auditory probes were presented during the videos, and event-related potentials (ERPs) elicited to the auditory probes were measured. As hypothesized, exposure to higher levels of interparental conflict was associated with smaller P1, P2, and N2 ERPs to the probes. This finding is consistent with the idea that children who had been exposed to more interparental conflict attended more to the videos and diverted fewer cognitive resources to processing the probes, thereby producing smaller ERPs to the probes. In addition, smaller N2s were associated with more child behavior problems, suggesting that allocating fewer processing resources to the probes was associated with more problem behavior. Results are discussed in terms of implications of socio-emotionally significant experiences for children’s processing of interpersonal interactions. PMID:27993611

  14. Developmental changes in children’s processing of redundant modifiers in definite object descriptions

    Directory of Open Access Journals (Sweden)

    Ruud Koolen

    2016-12-01

    Full Text Available This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (six or seven, and nine or ten years old were presented with pictures of sweets. In the first experiment (pairwise comparison, two identical sweets were shown, and one of these was described with a redundant modifier. After the description, the children had to indicate the sweet they preferred most in a forced-choice task. In the second experiment (graded rating, only one sweet was shown, which was described with a redundant color modifier in half of the cases (e.g., the blue sweet and in the other half of the cases simply as the sweet. This time, the children were asked to indicate on a 5-point rating scale to what extent they liked the sweets. In both experiments, the results showed that the younger children had a preference for the sweets described with redundant information, while redundant information did not have an effect on the preferences for the older children. These results imply that children are learning to distinguish between situations in which redundant information carries an implicature and situations in which this is not the case.

  15. Composición química y evaluación de la actividad antiherpética in vitro de aceites esenciales de Lippia alba (Mill N.E. Brown y sus componentes mayoritarios Chemical Composition and evaluation in vitro of anti-herpetic activity of essential oils from Lippia alba (Mill NE Brown and the main components

    Directory of Open Access Journals (Sweden)

    Lee Solbay Agudelo-Gómez

    2010-12-01

    Full Text Available Introducción: Lippia alba (Mill N.E. Brown es una planta aromática perteneciente a la familia Verbenaceae, ampliamente usada en Suramérica y Norteamérica como infusión contra la hipertensión, problemas digestivos, náuseas y resfriados. Objetivo: En el presente estudio, se evaluó la actividad antiviral in vitro frente al Herpesvirus Humano Tipo 1 (HSV-1, de veinte aceites esenciales de L. alba y, diez de sus componentes mayoritarios. Metodología: La actividad antiviral in vitro fue evaluada empleando la técnica modificada, de titulación del punto final (EPTT. Los aceites esenciales, de plantas de L. alba recolectadas de diferentes regiones del país, fueron obtenidos por hidrodestilación asistida con radiación de microondas (MWHD. Se determinó por cromatografía de gases-espectrometría de masas (GC-MS, la composición química, de los veinte aceites esenciales de L. alba, identificándose dos quimiotipos: citral y carvona. Resultados y conclusiones: Los aceites quimiotipo carvona, BC1 y CA2, mostraron actividad antiherpética in vitro, moderada sobre monocapa de células HeLa infectadas, con valores de Rf de 1x10(1,5, en concentraciones, de 250 μg/mL y 125 μg/mL, respectivamente. Los controles positivos, sulfato de heparina y aciclovir, redujeron el titulo viral con valores de Rf, en orden, de 1x10² y 1x10(4. Ninguno de los monoterpenos evaluados mostró actividad contra el HSV-1. Salud UIS 2010; 42: 230-239Introduction: Lippia alba (Mill. N.E. Brown is an aromatic shrub belonging to the Verbenaceae family, which is widely used all over South and Central America as an infusion against, hypertension, digestive troubles, nausea and cold. The antiviral activity in vitro against Herpesvirus 1, Human (HSV-1 of twenty essential oils of L. alba and ten of its components were evaluated. Methodology: The antiviral activity was determined using a modified end-point titration technique (EPPT. The essential oils from L. alba collected in

  16. Diagnosing in building main pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Telegin, L.G.; Gorelov, A.S.; Kurepin, B.N.; Orekhov, V.I.; Vasil' yev, G.G.; Yakovlev, Ye. I.

    1984-01-01

    General principles are examined for technical diagnosis in building main pipelines. A technique is presented for diagnosis during construction, as well as diagnosis of the technical state of the pipeline-construction machines and mechanisms. The survey materials could be used to set up construction of main pipelines.

  17. Maine Agricultural Foods. Project SEED.

    Science.gov (United States)

    Beaulieu, Peter; Ossenfort, Pat

    This paper describes an activity-based program that teaches students in grades 4-12 about the importance of Maine agriculture in their lives. Specifically, the goal is to increase student awareness of how the foods they eat are planted, harvested, and processed. The emphasis is on crops grown in Maine such as potatoes, broccoli, peas, blueberries,…

  18. Main Propulsion Test Article (MPTA)

    Science.gov (United States)

    Snoddy, Cynthia

    2010-01-01

    Scope: The Main Propulsion Test Article integrated the main propulsion subsystem with the clustered Space Shuttle Main Engines, the External Tank and associated GSE. The test program consisted of cryogenic tanking tests and short- and long duration static firings including gimbaling and throttling. The test program was conducted on the S1-C test stand (Position B-2) at the National Space Technology Laboratories (NSTL)/Stennis Space Center. 3 tanking tests and 20 hot fire tests conducted between December 21 1 1977 and December 17, 1980 Configuration: The main propulsion test article consisted of the three space shuttle main engines, flightweight external tank, flightweight aft fuselage, interface section and a boilerplate mid/fwd fuselage truss structure.

  19. ITER plasma facing components

    International Nuclear Information System (INIS)

    Kuroda, T.; Vieider, G.; Akiba, M.

    1991-01-01

    This document summarizes results of the Conceptual Design Activities (1988-1990) for the International Thermonuclear Experimental Reactor (ITER) project, namely those that pertain to the plasma facing components of the reactor vessel, of which the main components are the first wall and the divertor plates. After an introduction and an executive summary, the principal functions of the plasma-facing components are delineated, i.e., (i) define the low-impurity region within which the plasma is produced, (ii) absorb the electromagnetic radiation and charged-particle flux from the plasma, and (iii) protect the blanket/shield components from the plasma. A list of critical design issues for the divertor plates and the first wall is given, followed by discussions of the divertor plate design (including the issues of material selection, erosion lifetime, design concepts, thermal and mechanical analysis, operating limits and overall lifetime, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, and advanced divertor concepts) and the first wall design (armor material and design, erosion lifetime, overall design concepts, thermal and mechanical analysis, lifetime and operating limits, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, an alternative first wall design, and the limiters used instead of the divertor plates during start-up). Refs, figs and tabs

  20. THE WEAK s-PROCESS IN MASSIVE STARS AND ITS DEPENDENCE ON THE NEUTRON CAPTURE CROSS SECTIONS

    International Nuclear Information System (INIS)

    Pignatari, M.; Herwig, F.; Gallino, R.; Bisterzo, S.; Heil, M.; Wiescher, M.; Kaeppeler, F.

    2010-01-01

    The slow neutron capture process in massive stars (weak s process) produces most of the s-process isotopes between iron and strontium. Neutrons are provided by the 22 Ne(α,n) 25 Mg reaction, which is activated at the end of the convective He-burning core and in the subsequent convective C-burning shell. The s-process-rich material in the supernova ejecta carries the signature of these two phases. In the past years, new measurements of neutron capture cross sections of isotopes beyond iron significantly changed the predicted weak s-process distribution. The reason is that the variation of the Maxwellian-averaged cross sections (MACS) is propagated to heavier isotopes along the s path. In the light of these results, we present updated nucleosynthesis calculations for a 25 M sun star of Population I (solar metallicity) in convective He-burning core and convective C-burning shell conditions. In comparison with previous simulations based on the Bao et al. compilation, the new measurement of neutron capture cross sections leads to an increase of s-process yields from nickel up to selenium. The variation of the cross section of one isotope along the s-process path is propagated to heavier isotopes, where the propagation efficiency is higher for low cross sections. New 74 Ge, 75 As, and 78 Se MACS result in a higher production of germanium, arsenic, and selenium, thereby reducing the s-process yields of heavier elements by propagation. Results are reported for the He core and for the C shell. In shell C-burning, the s-process nucleosynthesis is more uncertain than in the He core, due to higher MACS uncertainties at higher temperatures. We also analyze the impact of using the new lower solar abundances for CNO isotopes on the s-process predictions, where CNO is the source of 22 Ne, and we show that beyond Zn this is affecting the s-process yields more than nuclear or stellar model uncertainties considered in this paper. In particular, using the new updated initial

  1. Analysis of main artifacts in scanning probe microscopy (1)

    International Nuclear Information System (INIS)

    Alekperov, S.D.; Alekperov, S.D.

    2012-01-01

    The analysis of experiment carrying methodology in the scanning probe microscopy (SPM) region is carried out, the main parameters influencing on image quality are revealed. In order to reveal the artifact reason the main components of SPM signal which are divided on 5 groups : the useful signal; noises connected with external influences and temperature drift; distortions connected with piezoceramics and piezo-scanner non-ideality; probe geometry influence; apparatus noises are considered. The main methods of removal and minimization of the given artifacts are considered. The second and third groups of main components of SPM signal are considered in the articles first part

  2. Left main percutaneous coronary intervention.

    Science.gov (United States)

    Teirstein, Paul S; Price, Matthew J

    2012-10-23

    The introduction of drug-eluting stents and advances in catheter techniques have led to increasing acceptance of percutaneous coronary intervention (PCI) as a viable alternative to coronary artery bypass graft (CABG) for unprotected left main disease. Current guidelines state that it is reasonable to consider unprotected left main PCI in patients with low to intermediate anatomic complexity who are at increased surgical risk. Data from randomized trials involving patients who are candidates for either treatment strategy provide novel insight into the relative safety and efficacy of PCI for this lesion subset. Herein, we review the current data comparing PCI with CABG for left main disease, summarize recent guideline recommendations, and provide an update on technical considerations that may optimize clinical outcomes in left main PCI. Copyright © 2012 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  3. Decontamination of main coolant pumps

    International Nuclear Information System (INIS)

    Roofthooft, R.

    1988-01-01

    Last year a number of main coolant pumps in Belgian nuclear power plants were decontaminated. A new method has been developed to reduce the time taken for decontamination and the volume of waste to be treated. The method comprises two phases: Oxidation with permanganate in nitric acid and dissolution in oxalic acid. The decontamination of main coolant pumps can now be achieved in less than one day. The decontamination factors attained range between 15 and 150. (orig.) [de

  4. New Main Ring control system

    International Nuclear Information System (INIS)

    Seino, K.; Anderson, L.; Ducar, R.; Franck, A.; Gomilar, J.; Hendricks, B.; Smedinghoff, J.

    1990-03-01

    The Fermilab Main Ring control system has been operational for over sixteen years. Aging and obsolescence of the equipment make the maintenance difficult. Since the advent of the Tevatron, considerable upgrades have been made to the controls of all the Fermilab accelerators except the Main Ring. Modernization of the equipment and standardization of the hardware and software have thus become inevitable. The Tevatron CAMAC serial system has been chosen as a basic foundation in order to make the Main Ring control system compatible with the rest of the accelerator complex. New hardware pieces including intelligent CAMAC modules have been designed to satisfy unique requirements. Fiber optic cable and repeaters have been installed in order to accommodate new channel requirements onto the already saturated communication medium system. 8 refs., 2 figs

  5. Schemes for applying active lubrication to main engine bearings

    DEFF Research Database (Denmark)

    Estupinan, Edgar Alberto; Santos, Ilmar

    2009-01-01

    -difference method. The computed bearing fluid film forces are coupled to the set of nonlinear equations that describes the dynamics of the reciprocating engine, obtained with the help of multibody dynamics (rigid components) and finite elements method (flexible components). The main equations that govern...

  6. GALACTIC CHEMICAL EVOLUTION: THE IMPACT OF THE 13C-POCKET STRUCTURE ON THE s -PROCESS DISTRIBUTION

    International Nuclear Information System (INIS)

    Bisterzo, S.; Travaglio, C.; Wiescher, M.; Käppeler, F.; Gallino, R.

    2017-01-01

    The solar s -process abundances have been analyzed in the framework of a Galactic Chemical Evolution (GCE) model. The aim of this work is to implement the study by Bisterzo et al., who investigated the effect of one of the major uncertainties of asymptotic giant branch (AGB) yields, the internal structure of the 13 C pocket. We present GCE predictions of s -process elements computed with additional tests in the light of suggestions provided in recent publications. The analysis is extended to different metallicities, by comparing GCE results and updated spectroscopic observations of unevolved field stars. We verify that the GCE predictions obtained with different tests may represent, on average, the evolution of selected neutron-capture elements in the Galaxy. The impact of an additional weak s -process contribution from fast-rotating massive stars is also explored.

  7. Description of the Main Features of the Series Production of the LHC Main Dipole Magnets

    CERN Document Server

    Savary, F; Chevret, P; de Rijk, G; Fessia, P; Liénard, P; Miles, J; Modena, M; Rossi, L; Tommasini, D; Vlogaert, J; Bresson, D; Grunblatt, G; Decoene, JF; Bressani, F; Drago, G; Gagliardi, P; Eysselein, F; Gärtner, W; Lublow, P

    2008-01-01

    The series production of the LHC main dipole magnets was completed in November 2006. This paper presents the organization implemented at CERN and the milestones fixed to fullfil the technical requirements and to respect the master schedule of the machine installation. The CERN organization for the production follow-up, the quality assurance and the magnet testing, as well as the organization of the three main contractors will be described. A description of the design work and procurement of most of the specific heavy tooling and key components will be given with emphasis on the advantages and drawbacks.

  8. Optimized Kernel Entropy Components.

    Science.gov (United States)

    Izquierdo-Verdiguier, Emma; Laparra, Valero; Jenssen, Robert; Gomez-Chova, Luis; Camps-Valls, Gustau

    2017-06-01

    This brief addresses two main issues of the standard kernel entropy component analysis (KECA) algorithm: the optimization of the kernel decomposition and the optimization of the Gaussian kernel parameter. KECA roughly reduces to a sorting of the importance of kernel eigenvectors by entropy instead of variance, as in the kernel principal components analysis. In this brief, we propose an extension of the KECA method, named optimized KECA (OKECA), that directly extracts the optimal features retaining most of the data entropy by means of compacting the information in very few features (often in just one or two). The proposed method produces features which have higher expressive power. In particular, it is based on the independent component analysis framework, and introduces an extra rotation to the eigen decomposition, which is optimized via gradient-ascent search. This maximum entropy preservation suggests that OKECA features are more efficient than KECA features for density estimation. In addition, a critical issue in both the methods is the selection of the kernel parameter, since it critically affects the resulting performance. Here, we analyze the most common kernel length-scale selection criteria. The results of both the methods are illustrated in different synthetic and real problems. Results show that OKECA returns projections with more expressive power than KECA, the most successful rule for estimating the kernel parameter is based on maximum likelihood, and OKECA is more robust to the selection of the length-scale parameter in kernel density estimation.

  9. Main: FBB2 [TP Atlas

    Lifescience Database Archive (English)

    Full Text Available ion of the c-ring - A subunit packing model of E. coli c-ring has been proposed - The main chain secondary s...tructure of thermophile c-ring has been obtained ATP synthase is a general term for an enzyme that can synth

  10. Main: FEA5 [TP Atlas

    Lifescience Database Archive (English)

    Full Text Available al or an anti-cancer drug, is the main cause of hospital-acquired infection - Dru...e will elucidate the entire structure of the transport machinery in action to understand its functions in detail. FEA5.csml ...

  11. Residential Energy Efficiency Potential: Maine

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-02

    Energy used by Maine single-family homes that can be saved through cost-effective improvements. Prepared by Eric Wilson and Noel Merket, NREL, and Erin Boyd, U.S. Department of Energy Office of Energy Policy and Systems Analysis.

  12. CENTRE OF THE MAIN INTERESTS

    Directory of Open Access Journals (Sweden)

    DIANA DELEANU

    2013-05-01

    Full Text Available The centre of the main interests of the debtor is a legal tool meant to settle conflicts that can arise between jurisdictions in cross-border insolvencies, based on the principles of mutual recognition and co-operation.

  13. Component reliability for electronic systems

    CERN Document Server

    Bajenescu, Titu-Marius I

    2010-01-01

    The main reason for the premature breakdown of today's electronic products (computers, cars, tools, appliances, etc.) is the failure of the components used to build these products. Today professionals are looking for effective ways to minimize the degradation of electronic components to help ensure longer-lasting, more technically sound products and systems. This practical book offers engineers specific guidance on how to design more reliable components and build more reliable electronic systems. Professionals learn how to optimize a virtual component prototype, accurately monitor product reliability during the entire production process, and add the burn-in and selection procedures that are the most appropriate for the intended applications. Moreover, the book helps system designers ensure that all components are correctly applied, margins are adequate, wear-out failure modes are prevented during the expected duration of life, and system interfaces cannot lead to failure.

  14. Components selection for ageing management

    International Nuclear Information System (INIS)

    Mingiuc, C.; Vidican, D.

    2002-01-01

    Full text: The paper presents a synthesis of methods and activities realized for the selection of critical components to assure plant safety and availability (as electricity supplier). There are presented main criteria for selection, screening process. For the resulted categories of components shall be applied different category of maintenance (condition oriented, scheduled or corrective), function of the importance and financial effort necessary to fulfil the task. 1. Systems and components screening for plant safety assurance For the systems selection, from Safety point of view, was necessary first, to define systems which are dangerous in case of failure (mainly by rupture/ release of radioactivity) and the safety systems which have to mitigate the effects. This is realized based on accident analysis (from Safety Report). Also where taken in to account the 4 basic Safety Principles: 'Reactor shut down; Residual heat removal; Radioactivity products confinement; NPP status monitoring in normal and accident conditions'. Following step is to establish safety support systems, which have to action to assure main safety systems operation. This could be realized based on engineering judgement, or on PSA Level I analysis. Finally shall be realized chains of the support systems, which have to work, till primary systems. For the critical components selection, was realized a Failure Mode and Effect Analysis (FMEA), considering the components effects of failures, on system safety function. 2. Systems and components screening for plant availability assurance The work was realized in two steps: Systems screening; Components screening The systems screening, included: General, analyze of the plant systems list and the definition of those which clearly have to run continue to assure the nominal power; Realization of a complex diagram to define interdependence between the systems (e.g. PHT and auxiliaries, moderator and auxiliaries, plant electrical diagram); Fill of special

  15. The 139La(n,gamma) cross section: key for the onset of the s process

    CERN Document Server

    Terlizzi, R.; Aerts, G.; Alvarez, H.; Alvarez-Velarde, F.; Andriamonje, S.; Andrzejewski, J.; Assimakopoulos, P.; Audouin, L.; Badurek, G.; Baumann, P.; Becvar, F.; Berthoumieux, E.; Calviani, M.; Calvino, F.; Cano-Ott, D.; Capote, R.; de Albornoz, A.Carrillo; Cennini, P.; Chepel, V.; Chiaveri, E.; Colonna, N.; Cortes, G.; Couture, A.; Cox, J.; Dahlfors, M.; David, S.; Dillmann, I.; Dolfini, R.; Domingo-Pardo, C.; Dridi, W.; Duran, I.; Eleftheriadis, C.; Embid-Segura, M.; Ferrant, L.; Ferrari, A.; Ferreira-Marques, R.; Fitzpatrick, L.; Frais-Koelbl, H.; Fujii, K.; Furman, W.; Gallino, R.; Goncalves, I.; Gonzalez-Romero, E.; Goverdovski, A.; Gramegna, F.; Griesmayer, E.; Guerrero, C.; Gunsing, F.; Haas, B.; Haight, R.; Heil, M.; Herrera-Martinez, A.; Igashira, M.; Isaev, S.; Jericha, E.; Kadi, Y.; Kappeler, F.; Karamanis, D.; Karadimos, D.; Kerveno, M.; Ketlerov, V.; Koehler, P.; Konovalov, V.; Kossionides, E.; Krticka, M.; Lamboudis, C.; Leeb, H.; Lindote, A.; Lopes, I.; Lozano, M.; Lukic, S.; Marganiec, J.; Marques, L.; Marrone, S.; Massimi, C.; Mastinu, P.; Mengoni, A.; Milazzo, P.M.; Moreau, C.; Mosconi, M.; Neves, F.; Oberhummer, H.; O'Brien, S.; Pancin, J.; Papachristodoulou, C.; Papadopoulos, C.; Paradela, C.; Patronis, N.; Pavlik, A.; Pavlopoulos, P.; Perrot, L.; Pignatari, M.; Plag, R.; Plompen, A.; Plukis, A.; Poch, A.; Pretel, C.; Quesada, J.; Rauscher, T.; Reifarth, R.; Rosetti, M.; Rubbia, C.; Rudolf, G.; Rullhusen, P.; Salgado, J.; Sarchiapone, L.; Savvidis, I.; Stephan, C.; Tagliente, G.; Tain, J.L.; Tassan-Got, L.; Tavora, L.; Vannini, G.; Vaz, P.; Ventura, A.; Villamarin, D.; Vincente, M.C.; Vlachoudis, V.; Vlastou, R.; Voss, F.; Walter, S.; Wendler, H.; Wiescher, M.; Wisshak, K.

    2007-01-01

    The nuclear resonance parameters and the capture cross section of the neutron magic isotope 139La has been measured n_TOF. The description of the experimental apparata is followed by the data analysis procedures. We extracted the resonance parameters, the main nuclear quantities such as the resonance integral, the average gamma widths for s- and p-waves, the nuclear level densities and the neutron strength functions. These results represent a signifcant improvement over previous data. The deduced Maxwellian-averaged capture cross sections are important for the interpretation of the most recent spectroscopic observations in low metallicity stars.

  16. ONKALO - Main drawings in 2007

    International Nuclear Information System (INIS)

    2008-05-01

    The first overall site characterisation programme for a Finnish repository of spent nuclear fuel was introduced in 1982. This programme already suggested that the site confirmation for a detailed repository design and safety assessment should include characterisation performed in an underground rock characterisation facility (URCF). This idea was confirmed during the detailed site characterisation. International views have also emphasised the importance of underground characterisation before the final decision to construct the repository is taken. The underground rock characterisation facility (ONKALO) is excavated at Olkiluoto in the municipality of Eurajoki. ONKALO should be constructed to allow characterisation work for site confirmation without jeopardising long-term safety of the repository site. It should also be possible to link ONKALO later to the repository as to a part of it. The construction of ONKALO was started in 2004 and will be completed in 2014. The characterisation work has started in ONKALO and will focus on the disposal depth. In the main drawings stage, ONKALO was described at the level of detail needed for a construction permit in 2003. This meant description of the location, final structures and final systems. This summary report describes the development of design to updated main drawings in 2007 at the same level of detail (no temporary arrangements are described). The main changes are the added exhaust air shaft and advancing the controlled area's inlet air shaft to the ONKALO phase. Also the layout and the depth of the characterisation levels have been updated according to the current bedrock information. Some buildings on the surface will house sets of equipment directly connected with underground facility and this equipment is described in this report. No buildings or other equipment are described in this report, because they are not directly connected with the underground facility. The main element of ONKALO is a system of

  17. At ISR Main Control Room

    CERN Multimedia

    1983-01-01

    After 13 years the exploitation of the Intersecting Storage Rings as a beam-beam collider went to an end. In this last year the demands were very exacting, both in terms of operating time and diversified running conditions (Annual Report 1983 p. 123). Before dismantelement the photographer made a last tour, see photos 8310889X --> 8310667X. This photo shows the Main Control Room.

  18. Achievement report for fiscal 1993. International clean energy system technology to utilize hydrogen - WE-NET (Sub-task 8. Development of hydrogen burning turbines - Development of main components including turbine blades and rotors); 1993 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) (Sub tusk 8: Suiso nensho tabin no kaihatsu - tabin yoku rota tou shuyou kosei kiki no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Among the research and development items in relation with the 'development of hydrogen burning turbines' based on the WE-NET project, surveys have been performed on developing the main components including turbine blades and rotors. The current fiscal year has surveyed the latest trends in the existing gas turbine and rotor cooling technologies, and the technological problems were extracted from the viewpoint of application to the hydrogen fueled turbines. Since the hydrogen fueled turbines have the entrance temperature higher than that of power generation gas turbines, development of the blade cooling technology is important. Main cooling methods available are the film cooling and transpiration cooling, whose technological development is necessary in the advanced forms. Cooling method for the inner side of blades includes the impingement cooling and the pin fin cooling, whereas the V-letter shaped turbulence accelerating rib and the serpentine flow path structure are considered promising. Increasing the anti-heat temperature of blades may be realized by utilizing ceramics. As a technology close to putting it into practical use, application of heat shield coating is promising. (NEDO)

  19. Measurement of the -3 keV resonance in the {sup 13}C({alpha},n){sup 16}O reaction and its influence on the synthesis of s-process nuclei

    Energy Technology Data Exchange (ETDEWEB)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Rogachev, G. V.; Mukhamedzhanov, A. M.; Avila, M.; Guardo, G. L.; Koshchiy, E.; Kuchera, A.; Lamia, L.; Puglia, S. M. R.; Romano, S.; Santiago, D.; Sparta, R. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, Catania (Italy); Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, Catania (Italy) and Dipartimento di Fisica e Astronomia, Universita di Catania, Catania (Italy); and others

    2012-11-20

    The {sup 13}C({alpha},n){sup 16}O reaction is the neutron source for the main component of the s-process, responsible of the production of most nuclei in the mass range 90 < A < 204. It is active inside the helium-burning shell in asymptotic giant branch stars, at temperatures < 10{sup 8} K, corresponding to an energy interval where the {sup 13}C({alpha},n){sup 16}O is effective of 140 - 230 keV. In this region, the astrophysical S(E)-factor is dominated by the -3 keV sub-threshold resonance due to the 6.356 MeV level in {sup 17}O, giving rise to a steep increase of the S-factor. Notwithstanding that it plays a crucial role in astrophysics, no direct measurements exist. Therefore, we have applied the Trojan Horse Method (THM) to the {sup 13}C({sup 6}Li,n{sup 16}O)d quasi-free reaction to achieve an experimental estimate of such contribution. For the first time, the ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing to attain an unprecedented accuracy in the {sup 13}C({alpha},n){sup 16}O study. Though a larger ANC for the 6.356 MeV level is measured, our experimental S(E) factor agrees with the most recent extrapolation in the literature in the 140 - 230 keV energy interval, the accuracy being greatly enhanced thanks to this innovative approach.

  20. Specifics of horizontal and vertical relations in Ukrainian political communication on the background of the party building’s process, political science theory and requirements to Ukrainian political context

    Directory of Open Access Journals (Sweden)

    K. Y. Odarchenko

    2016-10-01

    Full Text Available The specifics of horizontal and vertical relations in Ukrainian political communication on the background of the party building’s process has been analysed. Aims of this article are: 1 determination of the subjectivity of political communication; 2 disclosure of the main features of internal politics and communications; 3 setting the essential features of the political parties’ status after peaceful protests in Ukraine 2013-2014 year; 4 explanation of the actual gap that has horizontal and party political communication in Ukraine. Political modernization, capacity of Ukrainian political parties has been characterized. It has been shown that Maidan didn’t influenced tools of creating political parties and their typology greatly. Maidan as a political component was weak and did not respond to the challenges, which Ukrainian political system faced to. The weakness was in the fact that leaders of the oppositional political camp would rather keep old then implement real political change of the political system , which was adapted by the old oliharcial clan. Public sector was not able to identify their environment with new political leaders, nor with a mass movement, based on the creation of new organized political force. It has been found that in a democratic society communication is effective only if it is not only technically modern, interactive, two-way, but if it is consistent to other democratic demands, such as legal and moral control of society over the media, maintenance of basic pluralism, direct contact between senders and recipients of information, feeds decentralization, respect of freedom of expression and privat opinion. Summary of the political communication in Ukraine has to move away from thinking of policy and bureaucratic political consciousness. Otherwise, the simulation is effective and efficient for countries and regions where political communication can become a daily political farce communication in public space.

  1. JWST-MIRI spectrometer main optics design and main results

    Science.gov (United States)

    Navarro, Ramón; Schoenmaker, Ton; Kroes, Gabby; Oudenhuysen, Ad; Jager, Rieks; Venema, Lars

    2017-11-01

    MIRI ('Mid InfraRed Instrument') is the combined imager and integral field spectrometer for the 5-29 micron wavelength range under development for the James Webb Space Telescope JWST. The flight acceptance tests of the Spectrometer Main Optics flight models (SMO), part of the MIRI spectrometer, are completed in the summer of 2008 and the system is delivered to the MIRI-JWST consortium. The two SMO arms contain 14 mirrors and form the MIRI optical system together with 12 selectable gratings on grating wheels. The entire system operates at a temperature of 7 Kelvin and is designed on the basis of a 'no adjustments' philosophy. This means that the optical alignment precision depends strongly on the design, tolerance analysis and detailed knowledge of the manufacturing process. Because in principle no corrections are needed after assembly, continuous tracking of the alignment performance during the design and manufacturing phases is important. The flight hardware is inspected with respect to performance parameters like alignment and image quality. The stability of these parameters is investigated after exposure to various vibration levels and successive cryogenic cool downs. This paper describes the philosophy behind the acceptance tests, the chosen test strategy and reports the results of these tests. In addition the paper covers the design of the optical test setup, focusing on the simulation of the optical interfaces of the SMO. Also the relation to the SMO qualification and verification program is addressed.

  2. Main ring transition crossing simulations

    International Nuclear Information System (INIS)

    Kourbanis, I.; Ng, King-Yuen.

    1990-10-01

    We used ESME to simulate transition crossing in the Main Ring (MR). For the simulations, we followed the MR 29 cycle used currently for bar p production with a flat top of 120 GeV. In Sect. II, some inputs are discussed. In Sect. III, we present simulations with space charge turned off so that the effect of nonlinearity can be studied independently. When space charge is turned on in Sect. IV, we are faced with the problem of statistical errors due to binning, an analysis of which is given in the Appendices. Finally in Sects. V and VI, the results of simulations with space charge are presented and compared with the experimental measurements. 7 refs., 6 figs

  3. Improvement of main control room

    International Nuclear Information System (INIS)

    Chae, Sung Ki; Ham, Chang Sik; Kwon, Ki Chun

    1991-07-01

    Information display system, advanced alarm system and fiber optical communication system were developed to improve the main control room in nuclear power plant. Establishing the new hierachical information structure of plant operation data, plant overview status board(POSB) and digital indicator(DI) were designed and manufactured. The prototype advanced alarm system which employed the new alarm logics and algorithm compared with the conventional alarm system were developed and its effectiveness was proved. Optical communication system which has multi-drop feature and capability of upgrading to large-scale system by using BITBUS communication protocol which is proven technology, were developed. Reliability of that system was enhanced by using distributed control. (Author)

  4. The role of Main Institutions

    DEFF Research Database (Denmark)

    Persson, H Thomas R; Chabanet, Didier; Rakar, Fredrik

    2017-01-01

    ), in many countries the need emerged to understand the best methods to promote their establishment and continued success. In order to understand these issues, to contribute to the academic debate on SEs and to give useful policy advice on a truly enabling ecosystem, in November 2013 a consortium of 11...... Entrepreneurship”; to identify the “New Generation” of Social Entrepreneurs; to build an “Evolutionary Theory of Social Entrepreneurship”; to provide effective policy advices to stakeholders. In order to pursue and achieve these research objectives, the consortium implemented a complex research design...... in the social economy; - In the fifth chapter the authors address the role of the main institutions in developing (or hindering) social enterprises; - In the sixth chapter, stakeholder network maps are used to identify four ‘ecosystem types’ across the 10 partner countries; - The seventh chapter gives...

  5. Natural syntax : English interrogative main clauses

    Directory of Open Access Journals (Sweden)

    Janez Oresnik

    2007-12-01

    Full Text Available Natural Syntax is a developing deductive theory, a branch of Naturalness Theory. The naturalnessjudgements are couched in naturalness scales, whichfollow from the basic parameters (or «axioms» listed at the beginning of the paper. The predictions of the theory are calculated in deductions, whose chief components are apair of naturalness scales and the rules governing the alignment of corresponding naturalness values. Parallel and chiastic alignments are distinguished, in complementary distribution. Chiastic alignment is mandatory in deductions limited to unnatural environments. The paper deals with English interrogative main clauses. Within these, only the interrogatives containing wh-words exclusively insitu constitute an extremely unnatural environment and require chiastic alignment. Otherwiseparallel alignment is used. Earlier publications on Natural Syntax: Kavcic 2005a,b, Oresnik 1999, 2000a,b, 200la-f   2002, 2003a-c, 2002/03, 2004. This list cites only works written in English.

  6. Metal binding by food components

    DEFF Research Database (Denmark)

    Tang, Ning

    for zinc binding by the investigated amino acids, peptides and proteins. The thiol group or imidazole group containing amino acids, peptides and proteins which exhibited strong zinc binding ability were further selected for interacting with zinc salts in relation to zinc absorption. The interactions...... between the above selected food components and zinc citrate or zinc phytate will lead to the enhanced solubility of zinc citrate or zinc phytate. The main driving force for this observed solubility enhancement is the complex formation between zinc and investigated food components as revealed by isothermal...... titration calorimetry and quantum mechanical calculations. This is due to the zinc binding affinity of the relatively softer ligands (investigated food components) will become much stronger than citrate or phytate when they present together in aqueous solution. This mechanism indicates these food components...

  7. New neutron capture and total cross section measurements on 88Sr and their impact on s-process nucleosynthesis

    International Nuclear Information System (INIS)

    Koehler, P.E.; Spencer, R.R.; Guber, K.H.

    1998-01-01

    The authors have made new and improved measurements of the neutron capture and total cross sections of 88 Sr at the Oak Ridge Electron Linear Accelerator (ORELA). Improvements over previous measurements include a wider incident neutron energy range, the use of metallic rather than carbonate samples, better background subtraction, reduced sensitivity to sample-dependent backgrounds, and better pulse-height weighting functions. Because of its small cross section, the 88 Sr(n,γ) reaction is an important bottleneck during the s-process nucleosynthesis. Hence, an accurate determination of this rate is needed to better constrain the neutron exposure in s-process models and to more fully exploit the recently discovered isotopic anomalies in certain meteorites. They describe the experimental procedures, compare the results to previous data, and discuss their astrophysical impact

  8. Dynamic stellar neutron-capture nucleosynthesis: the need for more nuclear data for the s-process

    International Nuclear Information System (INIS)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1984-09-01

    We summarize results from a detailed parameter study of the s-process in models which produce an exponential distribution of exposures by sequential irradiations and dredge up in the stellar environment. The calculations are based on a complete network of measured and calculated neutron capture and beta-decay rates as well as estimates for their temperature dependence. In the framework of these models we identify and systematically vary the astrophysical variables which affect the observed solar-system sigmaN (cross section times abundance) curve. Constraints are placed on the s-process neutron exposure and flux as well as the temperatures, densities, neutron pulse shape and inter-pulse period. The results also highlight important needs for better nuclear data in various mass regions. 26 references

  9. Prototype fast breeder reactor main options

    International Nuclear Information System (INIS)

    Bhoje, S.B.; Chellapandi, P.

    1996-01-01

    Fast reactor programme gets importance in the Indian energy market because of continuous growing demand of electricity and resources limited to only coal and FBR. India started its fast reactor programme with the construction of 40 MWt Fast Breeder Test Reactor (FBTR). The reactor attained its first criticality in October 1985. The reactor power will be raised to 40 MWt in near future. As a logical follow-up of FBTR, it was decided to build a prototype fast breeder reactor, PFBR. Considering significant effects of capital cost and construction period on economy, systematic efforts are made to reduce the same. The number of primary and secondary sodium loops and components have been reduced. Sodium coolant, pool type concept, oxide fuel, 20% CW D9, SS 316 LN and modified 9Cr-1Mo steel (T91) materials have been selected for PFBR. Based on the operating experience, the integrity of the high temperature components including fuel and cost optimization aspects, the plant temperatures are recommended. Steam temperature of 763 K at 16.6 MPa and a single TG of 500 MWe gross output have been decided. PFBR will be located at Kalpakkam site on the coast of Bay of Bengal. The plant life is designed for 30 y and 75% load factor. In this paper the justifications for the main options chosen are given in brief. (author). 2 figs, 2 tabs

  10. A preliminary Analysis of Dörnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching. Different from previous motivation theories, Dörnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  11. A preliminary Analysis of Drnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching.Different from previous motivation theories, Drnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  12. DIARRHEA IN CHILDREN: MAIN CAUSES AND WAYS OF TREATMENT

    Directory of Open Access Journals (Sweden)

    S.V. Bel’mer

    2010-01-01

    Full Text Available The article discusses main questions of diagnostics of diarrhea in children. Main cause of acute diarrhea is infection, mainly viral (rotavirus, etc.. Chronic diarrhea frequently has non-infectious origin. The need of multi-aspect diagnostics of diarrhea cause in children is related to the significance of treatment of main disease. Besides, treatment of chronic and acute diarrhea include major component: adsorbents based on smectite. In total treatment of diarrhea has to be complex with the use of dietotherapy and medications: mucocytoprotectors, regulators of motoric, pre- and probiotics.Key words: children, diarrhea, treatment.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2010;9(6:135-138

  13. Main injector synchronous timing system

    International Nuclear Information System (INIS)

    Blokland, W.; Steimel, J.

    1998-01-01

    The Synchronous Timing System is designed to provide sub-nanosecond timing to instrumentation during the acceleration of particles in the Main Injector. Increased energy of the beam particles leads to a small but significant increase in speed, reducing the time it takes to complete a full turn of the ring by 61 nanoseconds (or more than 3 rf buckets). In contrast, the reference signal, used to trigger instrumentation and transmitted over a cable, has a constant group delay. This difference leads to a phase slip during the ramp and prevents instrumentation such as dampers from properly operating without additional measures. The Synchronous Timing System corrects for this phase slip as well as signal propagation time changes due to temperature variations. A module at the LLRF system uses a 1.2 Gbit/s G-Link chip to transmit the rf clock and digital data (e.g. the current frequency) over a single mode fiber around the ring. Fiber optic couplers at service buildings split off part of this signal for a local module which reconstructs a synchronous beam reference signal. This paper describes the background, design and expected performance of the Synchronous Timing System. copyright 1998 American Institute of Physics

  14. Main injector synchronous timing system

    International Nuclear Information System (INIS)

    Blokland, Willem; Steimel, James

    1998-01-01

    The Synchronous Timing System is designed to provide sub-nanosecond timing to instrumentation during the acceleration of particles in the Main Injector. Increased energy of the beam particles leads to a small but significant increase in speed, reducing the time it takes to complete a full turn of the ring by 61 nanoseconds (or more than 3 rf buckets). In contrast, the reference signal, used to trigger instrumentation and transmitted over a cable, has a constant group delay. This difference leads to a phase slip during the ramp and prevents instrumentation such as dampers from properly operating without additional measures. The Synchronous Timing System corrects for this phase slip as well as signal propagation time changes due to temperature variations. A module at the LLRF system uses a 1.2 Gbit/s G-Link chip to transmit the rf clock and digital data (e.g. the current frequency) over a single mode fiber around the ring. Fiber optic couplers at service buildings split off part of this signal for a local module which reconstructs a synchronous beam reference signal. This paper describes the background, design and expected performance of the Synchronous Timing System

  15. Main technical topics in 1999

    International Nuclear Information System (INIS)

    2000-01-01

    This Safety Authority annual report strives to present current organizational provisions and future trends in nuclear safety supervision in France and to describe the most outstanding occurrences during the past year. A first part presents nine documents concerning the main topics of 1999: aging of nuclear installations, the Offsite Emergency Plans (PPI), the impact of nuclear activities on man and the environment, the criticality hazards, EDF in 1999, the EPR project, the Andra in 1999, the transport incidents, the nuclear safety in eastern Europe. The second part presents the missions and actions of the Nuclear Installations Safety in the domains of the liabilities, the organization of the nuclear safety control, the regulations of the INB, the public information, the international relations, the crisis management, the radioactive materials transportation, the radioactive wastes. The equipment, the radiation protection and the exploitation of the pressurized water reactors are also treated just as the experimental reactors, the fuel cycle installations and the the nuclear installations dismantling. (A.L.B.)

  16. Research in auditing: main themes

    Directory of Open Access Journals (Sweden)

    Marcelo Porte

    Full Text Available ABSTRACT The passage of the Sarbanes-Oxley Act (SOX was a turning point in auditing and in auditors practice for the academic world. Research concerning the characterization of academic production related to auditing is in its third decade. Its analysis is accomplished by means of definition of keywords, abstracts or title, and information on thematic association within the academic production itself in auditing is undisclosed. In order to revise this gap in auditing literature, this study identified the main themes in auditing and their association in post-SOX era by analyzing the content of objectives and hypothesis of 1,650 publications in Web of Science (2002-2014. The findings in this study extended those from the study by Lesage and Wechtler (2012 from 16 auditing thematic typologies to 22. The results demonstrate that the themes audit report & financial statement users, corporate governance, audit market, external audit, socio-economic data of the company, international regulation, and fraud risk & audit risk were the most addressed in the publications about auditing. Corporate governance has a broader association with the other themes in the area. Future researches may use these themes and relate them to the methodologies applied to audit studies.

  17. Mitigating component performance variation

    Science.gov (United States)

    Gara, Alan G.; Sylvester, Steve S.; Eastep, Jonathan M.; Nagappan, Ramkumar; Cantalupo, Christopher M.

    2018-01-09

    Apparatus and methods may provide for characterizing a plurality of similar components of a distributed computing system based on a maximum safe operation level associated with each component and storing characterization data in a database and allocating non-uniform power to each similar component based at least in part on the characterization data in the database to substantially equalize performance of the components.

  18. Dual Component Removable Partial Denture shows improved ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-02-18

    Feb 18, 2009 ... 2Faculty of Dentistry, the University of Hong Kong, Hong Kong. 3Department of ... an example of poor oral condition caused mainly by periodontitis, and ... working model of the Dual Component Removable Partial Denture.

  19. The risk components of liquidity

    OpenAIRE

    Chollete, Lorán; Næs, Randi; Skjeltorp, Johannes A.

    2008-01-01

    Does liquidity risk differ depending on our choice of liquidity proxy? Unlike literature that considers common liquidity variation, we focus on identifying different components of liquidity, statistically and economically, using more than a decade of US transaction data. We identify three main statistical liquidity factors which are utilized in a linear asset pricing framework. We motivate a correspondence of the statistical factors to traditional dimensions of liquidity as well as the notion...

  20. Identification of QTLs with main, epistatic and QTL by environment ...

    Indian Academy of Sciences (India)

    interaction effects for seed shape and hundred-seed weight in soybean ... worldwide. It provides about 69 and 30% of dietary protein ... as main component of plants is affected by seed shape. ... In this analysis, in 2010–2012, seed shape and.

  1. Investigation of the s-process branch-point nucleus {sup 86}Rb at HIγS

    Energy Technology Data Exchange (ETDEWEB)

    Erbacher, Philipp; Glorius, Jan; Reifarth, Rene; Sonnabend, Kerstin [Goethe Universitaet Frankfurt am Main (Germany); Isaak, Johann; Loeher, Bastian; Savran, Deniz [GSI Helmholzzentrum fuer Schwerionenforschung (Germany); Tornow, Werner [Duke University (United States)

    2016-07-01

    The branch-point nucleus {sup 86}Rb determines the isotopic abundance ratio {sup 86}Sr/{sup 87}Sr in s-process nucleosynthesis. Thus, stellar parameters such as temperature and neutron density and their evolution in time as simulated by modern s-process network calculations can be constrained by a comparison of the calculated isotopic ratio with the one observed in SiC meteoritic grains. To this end, the radiative neutron-capture cross section of the unstable isotope {sup 86}Rb has to be known with sufficient accuracy. Since the short half-life of {sup 86}Rb prohibits the direct measurement, the nuclear-physics input to a calculation of the cross section has to be measured. For this reason, the γ-ray strength function of {sup 87}Rb was measured using the γ{sup 3} setup at the High Intensity γ-ray Source facility at TUNL in Durham, USA. First experimental results are presented.

  2. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  3. Effect of Cholesterol Removal Processing Using β-Cyclodextrin on Main Components of Milk

    Directory of Open Access Journals (Sweden)

    A. M. Maskooki

    2013-01-01

    Full Text Available Various concentrations (0%, 0.5%, 1% and 1.5% of β-CD were mixed with different fat contents (1%, 2.5% and 3% of raw (unhomogenized and homogenized milk at two mixing temperatures of 8 and 20°C. The cholesterol residue, fat, protein, lactose, solid nonfat (SNF, density, and ash content of milk were measured for each treatment. The results statistically analysed and showed that the cholesterol content of milk remarkably decreased as the β-CD was increased particularly in homogenized milk at 20°C. However, the reduction rate of cholesterol was decreased when extra β-CD was added due to its intermolecular reactions. The maximum cholesterol reduction was achieved at the level of 1% β-CD. The fat content, SNF, protein, lactose, and density content were decreased with increasing β-CD whereas it did not affect ash content.

  4. Spectrophotometry of zirconocene-polymethyl alumoxan catalytic systems: analysis of main components and parametric simulation

    International Nuclear Information System (INIS)

    Ryabenko, A.G.; Fajngol'd, E.E.; Ushakov, E.N.; Bravaya, N.M.

    2005-01-01

    Transformation of electronic spectra of absorption of zirconocene catalytic systems Ph 2 CCpFluZrCl 2 -poly methyl-alumoxan (MAO) and rac-Me 2 Si(2-Me,4-PhInd) 2 ZrCl 2 -MAO (Flu-fluorenyl, Ind-indenyl) in toluene as ratio of reagents Al MAO /Zr changes from 0 to 3000 mol mol -1 . Analysis of spectroscopic data with using the statistical methods made possible recognition of number of products of reaction in every system. Reaction model involving three equilibrium is suggested. Effective values of equilibrium constants and absorption spectra of separate products of reactions were evaluated by means of parametric self-simulation of experimental spectra [ru

  5. Study of interaction between protein and main active components in Citrus aurantium L. by optical spectroscopy

    International Nuclear Information System (INIS)

    Sun Yantao; Zhang Haitao; Sun Ye; Zhang Yupu; Liu He; Cheng Jianhua; Bi Shuyun; Zhang Hanqi

    2010-01-01

    The interaction between flavonoids and proteins was investigated by fluorescence and absorption spectroscopy. The binding parameters of drugs with proteins were obtained according to the corrected fluorescence data by an improved calculation method. The ΔH, ΔS and ΔG obtained indicate that the van der Waals or hydrogen bond, electrostatic force and hydrophobic forces all play a role in the interaction of drugs with proteins. Based on Foerster's theory, the binding average distance r between the protein and drug was evaluated and found to be less than 3 nm. The interaction of drug-metal ion complexes and proteins was also investigated.

  6. Water‐soluble red pigments from Isaria farinosa and structural characterization of the main colored component

    DEFF Research Database (Denmark)

    Velmurugan, Palanivel; Lee, Yong Hoon; Nanthakumar, Kuppanan

    2010-01-01

    darkness, sucrose and glucose as carbon source, yeast extract, meat peptone and monosodium glutamate at a fixed concentration of 3% as nitrogen source. The addition of 10 mM CaCl2 to the culture medium increased the biomass and pigment production. Structural elucidation of the pigment using gas...... commercial importance in the production of Isaria farinosa pigment for industrial application after considerable toxicological examination. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)......The present study describes the red pigment synthesized by the filamentous fungi Isaria farinosa under submerged culture conditions. The pigment production was optimal under the following conditions: pH 5, agitation speed 150 rpm, temperature 27 °C, incubation time 192 h, light source total...

  7. Antifungal activity, main active components and mechanism of Curcuma longa extract against Fusarium graminearum

    Science.gov (United States)

    Zhang, Fusheng; Chen, Qin; Chen, Cheng; Yu, Xiaorui; Liu, Qingya; Bao, Jinku

    2018-01-01

    Curcuma longa possesses powerful antifungal activity, as demonstrated in many studies. In this study, the antifungal spectrum of Curcuma longa alcohol extract was determined, and the resulting EC50 values (mg/mL) of its extract on eleven fungi, including Fusarium graminearum, Fusarium chlamydosporum, Alternaria alternate, Fusarium tricinctum, Sclerotinia sclerotiorum, Botrytis cinerea, Fusarium culmorum, Rhizopus oryzae, Cladosporium cladosporioides, Fusarium oxysporum and Colletotrichum higginsianum, were 0.1088, 0.1742, 0.1888, 0.2547, 0.3135, 0.3825, 0.4229, 1.2086, 4.5176, 3.8833 and 5.0183, respectively. Among them, F. graminearum was selected to determine the inhibitory effects of the compounds (including curdione, isocurcumenol, curcumenol, curzerene, β-elemene, curcumin, germacrone and curcumol) derived from Curcuma longa. In addition, the antifungal activities of curdione, curcumenol, curzerene, curcumol and isocurcumenol and the synergies of the complexes of curdione and seven other chemicals were investigated. Differential proteomics of F. graminearum was also compared, and at least 2021 reproducible protein spots were identified. Among these spots, 46 were classified as differentially expressed proteins, and these proteins are involved in energy metabolism, tRNA synthesis and glucose metabolism. Furthermore, several fungal physiological differences were also analysed. The antifungal effect included fungal cell membrane disruption and inhibition of ergosterol synthesis, respiration, succinate dehydrogenase (SDH) and NADH oxidase. PMID:29543859

  8. Bioactivity tests of calcium phosphates with variant molar ratios of main components.

    Science.gov (United States)

    Pluta, Klaudia; Sobczak-Kupiec, Agnieszka; Półtorak, Olga; Malina, Dagmara; Tyliszczak, Bożena

    2018-03-09

    Calcium phosphates constitute attractive materials of biomedical applications. Among them particular attention is devoted to bioactive hydroxyapatite (HAp) and bioresorbable tricalcium phosphate (TCP) that possess ability to bind to living bones and can be used clinically as important bone substitutes. Notably, in vivo bone bioactivity can be predicted from apatite formation of bone immersed in SBF fluids. Thus, analyses of behavior of calcium phosphates immersed in various bio fluids are of great importance. Recently, stoichiometric HAp and TCP structures have been widely studied, whereas only limited number of publications have been devoted to analyses of nonstoichiometric calcium phosphates. Here, we report physicochemical analysis of natural and synthetic phosphates with variable Ca/P molar ratios. Subsequently attained structures were subjected to incubation in either artificial saliva or Ringer's fluids. Both pH and conductivity of such fluids were determined before and after incubation. Furthermore, the influence of the Ca/P values on such parameters was exemplified. Physicochemical analysis of received materials was performed by XRD and FT-IR characterization techniques. Their potential antibacterial activity and behavior in the presence of infectious microorganisms as Escherichia coli and Staphylococcus aureus was also evaluated. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2018. © 2018 Wiley Periodicals, Inc.

  9. Activity of the main fatty acid components of the hexane leaf extract ...

    African Journals Online (AJOL)

    The composition of hexane leaf extract of Ricinus communis was determined by gas chromatography– mass spectrometry (GC-MS) to contain four fatty acids: linolenic acid (47.76%), linoleic acid (15.28%), palmitic acid (13.01%), and stearic acid (1.73%). The insectistatic and insecticidal activities of the two major ...

  10. USAGE OF THE MAIN COMPONENTS ANALYSIS IN THE MANAGEMENT OF THE INVESTMENT PORTFOLIO

    OpenAIRE

    Dan ARMEANU; Andreea NEGRU

    2011-01-01

    When managing investment portfolios on integrated capital markets, beyond the models put forth by the modern portfolio theory, (the Markowitz model, the CML model, the CAPM model, the Treynor-Black model and more), one can successfully resort to the statistical and mathematical tools made available by the multidimensional data analysis. The reason why we shall use those tools in our analysis is simple: they make it possible to reduce the number of variables in the analysis while preserving mu...

  11. Fusion reactor blanket-main design aspects

    International Nuclear Information System (INIS)

    Strebkov, Yu.; Sidorov, A.; Danilov, I.

    1994-01-01

    The main function of the fusion reactor blanket is ensuring tritium breeding and radiation shield. The blanket version depends on the reactor type (experimental, DEMO, commercial) and its parameters. Blanket operation conditions are defined with the heat flux, neutron load/fluence, cyclic operation, dynamic heating/force loading, MHD effects etc. DEMO/commercial blanket design is distinguished e.g. by rather high heat load and neutron fluence - up to 100 W/cm 2 and 7 MWa/m 2 accordingly. This conditions impose specific requirements for the materials, structure, maintenance of the blanket and its most loaded components - FW and limiter. The liquid Li-Pb eutectic is one of the possible breeder for different kinds of blanket in view of its advantages one of which is the blanket convertibility that allow to have shielding blanket (borated water) or breeding one (Li-Pb eutectic). Using Li-Pb eutectic for both ITER and DEMO blankets have been considered. In the conceptual ITER design the solid eutectic blanket was carried out. The liquid eutectic breeder/coolant is suggested also for the advanced (high parameter) blanket

  12. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  13. Tinkering at the main-ring lattice

    Energy Technology Data Exchange (ETDEWEB)

    Ohnuma, S.

    1982-08-23

    To improve production of usable antiprotons using the proton beam from the main ring and the lossless injection of cooled antiprotons into the main ring, modifications of the main ring lattice are recommended.

  14. Reactor component automatic grapple

    International Nuclear Information System (INIS)

    Greenaway, P.R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)

  15. Repurposing learning object components

    NARCIS (Netherlands)

    Verbert, K.; Jovanovic, J.; Gasevic, D.; Duval, E.; Meersman, R.

    2005-01-01

    This paper presents an ontology-based framework for repurposing learning object components. Unlike the usual practice where learning object components are assembled manually, the proposed framework enables on-the-fly access and repurposing of learning object components. The framework supports two

  16. Probing astrophysically important states in the 26Mg nucleus to study neutron sources for the s process

    Science.gov (United States)

    Talwar, R.; Adachi, T.; Berg, G. P. A.; Bin, L.; Bisterzo, S.; Couder, M.; deBoer, R. J.; Fang, X.; Fujita, H.; Fujita, Y.; Görres, J.; Hatanaka, K.; Itoh, T.; Kadoya, T.; Long, A.; Miki, K.; Patel, D.; Pignatari, M.; Shimbara, Y.; Tamii, A.; Wiescher, M.; Yamamoto, T.; Yosoi, M.

    2016-05-01

    Background: The 22Ne(α ,n )25Mg reaction is the dominant neutron source for the slow neutron capture process (s process) in massive stars, and contributes, together with 13C (α ,n )16O, to the production of neutrons for the s process in asymptotic giant branch (AGB) stars. However, the reaction is endothermic and competes directly with 22Ne(α ,γ )26Mg radiative capture. The uncertainties for both reactions are large owing to the uncertainty in the level structure of 26Mg near the α and neutron separation energies. These uncertainties affect the s -process nucleosynthesis calculations in theoretical stellar models. Purpose: Indirect studies in the past have been successful in determining the energies and the γ -ray and neutron widths of the 26Mg states in the energy region of interest. But, the high Coulomb barrier hinders a direct measurement of the resonance strengths, which are determined by the α widths for these states. The goal of the present experiments is to identify the critical resonance states and to precisely measure the α widths by α -transfer techniques. Methods: The α -inelastic scattering and α -transfer measurements were performed on a solid 26Mg target and a 22Ne gas target, respectively, using the Grand Raiden Spectrometer at the Research Center for Nuclear Physics in Osaka, Japan. The (α ,α') measurements were performed at 0 .45∘ , 4 .1∘ , 8 .6∘ , and 11 .1∘ and the (6Li,d ) measurements at 0∘ and 10∘. The scattered α particles and deuterons were detected by the focal plane detection system consisting of multiwire drift chambers and plastic scintillators. The focal plane energy calibration allowed the study of 26Mg levels from Ex = 7.69-12.06 MeV in the (α ,α') measurement and Ex = 7.36-11.32 MeV in the (6Li,d ) measurement. Results: Six levels (Ex = 10717, 10822, 10951, 11085, 11167, and 11317 keV) were observed above the α threshold in the region of interest (10.61-11.32 MeV). The α widths were calculated for these

  17. ON THE MEASUREMENT OF THE {sup 13}C(α, n){sup 16}O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Guardo, G. L.; Puglia, S. M. R.; Romano, S.; Spartà, R. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, I-95123, Catania (Italy); Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D. [Department of Physics, Florida State University, Tallahassee, FL (United States); Mukhamedzhanov, A. M. [Cyclotron Institute, Texas A and M University, College Station, TX (United States); Lamia, L., E-mail: lacognata@lns.infn.it [Dipartimento di Fisica e Astronomia, Università di Catania, I-95123 Catania (Italy)

    2013-11-10

    The {sup 13}C(α, n){sup 16}O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼< A ∼< 208. This reaction takes place inside the helium-burning shell of asymptotic giant branch stars, at temperatures ∼< 10{sup 8} K, corresponding to an energy interval where the {sup 13}C(α, n){sup 16}O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in {sup 17}O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the {sup 13}C({sup 6}Li, n {sup 16}O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the {sup 13}C(α, n){sup 16}O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde{sub α{sup 1}{sup 3}C}{sup 17O(1/2+)2} = 7.7 ± 0.3{sub stat} {sub -1.5}{sup +1.}|6 norm fm{sup –1}, yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the {sup 13}C(α, n){sup 16}O reaction rate below about 8 × 10{sup 7} K if compared with the recommended values. At ∼10{sup 8} K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach.

  18. The Livingstone Model of a Main Propulsion System

    Science.gov (United States)

    Bajwa, Anupa; Sweet, Adam; Korsmeyer, David (Technical Monitor)

    2003-01-01

    Livingstone is a discrete, propositional logic-based inference engine that has been used for diagnosis of physical systems. We present a component-based model of a Main Propulsion System (MPS) and say how it is used with Livingstone (L2) in order to implement a diagnostic system for integrated vehicle health management (IVHM) for the Propulsion IVHM Technology Experiment (PITEX). We start by discussing the process of conceptualizing such a model. We describe graphical tools that facilitated the generation of the model. The model is composed of components (which map onto physical components), connections between components and constraints. A component is specified by variables, with a set of discrete, qualitative values for each variable in its local nominal and failure modes. For each mode, the model specifies the component's behavior and transitions. We describe the MPS components' nominal and fault modes and associated Livingstone variables and data structures. Given this model, and observed external commands and observations from the system, Livingstone tracks the state of the MPS over discrete time-steps by choosing trajectories that are consistent with observations. We briefly discuss how the compiled model fits into the overall PITEX architecture. Finally we summarize our modeling experience, discuss advantages and disadvantages of our approach, and suggest enhancements to the modeling process.

  19. Components of Maternal Healthcare Delivery System Contributing to ...

    African Journals Online (AJOL)

    Components of Maternal Healthcare Delivery System Contributing to Maternal Deaths ... transcripts were analyzed using a directed approach to content analysis. Excerpts were categorized according to three main components of the maternal ...

  20. s-process studies in the light of new experimental cross sections: Distribution of neutron fluences and r-process residuals

    International Nuclear Information System (INIS)

    Kaeppeler, F.; Beer, H.; Wisshak, K.; Clayton, D.D.; Macklin, R.L.; Ward, R.A.

    1981-08-01

    A best set of neutron-capture cross sections has been evaluated for the most important s-process isotopes. With this data base, s-process studies have been carried out using the traditional model which assumes a steady neutron flux and an exponential distribution of neutron irradiations. The calculated sigmaN-curve is in excellent agreement with the empirical sigmaN-values of pure s-process nuclei. Simultaneously, good agreement is found between the difference of solar and s-process abundances and the abundances of pure r-process nuclei. We also discuss the abundance pattern of the iron group elements where our s-process results complement the abundances obtained from explosive nuclear burning. The results obtained from the traditional s-process model such as seed abundances, mean neutron irradiations, or neutron densities are compared to recent stellar model calculations which assume the He-burning shells of red giant stars as the site for the s-process. (orig.) [de

  1. Main tendencies meeting future energy demands

    International Nuclear Information System (INIS)

    Flach, G.; Riesner, W.; Ufer, D.

    1989-09-01

    The economic development in the German Democratic Republic within the preceding 10 years has proved that future stable economic growth of about 4 to 4.5% per annum is only achievable by ways including methods of saving resources. This requires due to the close interdependences between the social development and the level of the development in the energy sector long-term growth rates of the national income of 4 to 4.5% per annum at primary energy growth rates of less than 1% per annum. It comprises three main tendencies: 1. Organization of a system with scientific-technical, technological, economic structural-political and educational measures ensuring in the long term less increase of the energy demand while keeping the economic growth at a constant level. 2. The long-term moderate extension and modernization of the GDR's energy basis is characterized by continuing use of the indigenous brown coal resources for the existing power plant capacities and for district heating. 3. The use of modern and safe nuclear power technologies defines a new and in future more and more important element of the energy basis. Currently about 10% of electricity in the GDR are covered by nuclear energy, in 2000 it will be one third, after 2000 the growth process will continue. The experience shows: If conditions of deepened scientific consideration of all technological processes and the use of modern diagnosis and computer technologies as well as permanent improvement of the safety-technological components and equipment are guaranteed an increasing use of such systems for the production of electricity and heat is socially acceptable. Ensuring a high level of education and technical training of everyone employed in the nuclear energy industry, strict safety restrictions and independent governmental control of these restrictions are important preconditions for the further development in this field. 3 refs, 5 tabs

  2. Control component retainer

    International Nuclear Information System (INIS)

    Walton, L.A.; King, R.A.

    1983-01-01

    An apparatus is described for retaining an undriven control component assembly disposed in a fuel assembly in a nuclear reactor of the type having a core grid plate. The first part of the mechanism involves a housing for the control component and the second part is a brace with a number of arms that reach under the grid plate. The brace and the housing are coupled together to firmly hold the control components in place even under strong flows of th coolant

  3. Component design for LMFBR's

    International Nuclear Information System (INIS)

    Fillnow, R.H.; France, L.L.; Zerinvary, M.C.; Fox, R.O.

    1975-01-01

    Just as FFTF has prototype components to confirm their design, FFTF is serving as a prototype for the design of the commercial LMFBR's. Design and manufacture of critical components for the FFTF system have been accomplished primarily using vendors with little or no previous experience in supplying components for high temperature sodium systems. The exposure of these suppliers, and through them a multitude of subcontractors, to the requirements of this program has been a necessary and significant step in preparing American industry for the task of supplying the large mechanical components required for commercial LMFBR's

  4. Hot gas path component

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward

    2017-09-12

    Various embodiments of the disclosure include a turbomachine component. and methods of forming such a component. Some embodiments include a turbomachine component including: a first portion including at least one of a stainless steel or an alloy steel; and a second portion joined with the first portion, the second portion including a nickel alloy including an arced cooling feature extending therethrough, the second portion having a thermal expansion coefficient substantially similar to a thermal expansion coefficient of the first portion, wherein the arced cooling feature is located within the second portion to direct a portion of a coolant to a leakage area of the turbomachine component.

  5. 75 FR 27863 - Savings Bank of Maine, MHC and Savings Bank of Maine, Gardiner, Maine; Approval of Conversion...

    Science.gov (United States)

    2010-05-18

    ... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-38: OTS Nos. 06947 and H 4709] Savings Bank of Maine, MHC and Savings Bank of Maine, Gardiner, Maine; Approval of Conversion Application Notice is hereby given that on May 7, 2010, the Office of Thrift Supervision approved the application of...

  6. Inspection of disposal canisters components

    International Nuclear Information System (INIS)

    Pitkaenen, J.

    2013-12-01

    This report presents the inspection techniques of disposal canister components. Manufacturing methods and a description of the defects related to different manufacturing methods are described briefly. The defect types form a basis for the design of non-destructive testing because the defect types, which occur in the inspected components, affect to choice of inspection methods. The canister components are to nodular cast iron insert, steel lid, lid screw, metal gasket, copper tube with integrated or separate bottom, and copper lid. The inspection of copper material is challenging due to the anisotropic properties of the material and local changes in the grain size of the copper material. The cast iron insert has some acoustical material property variation (attenuation, velocity changes, scattering properties), which make the ultrasonic inspection demanding from calibration point of view. Mainly three different methods are used for inspection. Ultrasonic testing technique is used for inspection of volume, eddy current technique, for copper components only, and visual testing technique are used for inspection of the surface and near surface area

  7. Component processes underlying future thinking.

    Science.gov (United States)

    D'Argembeau, Arnaud; Ortoleva, Claudia; Jumentier, Sabrina; Van der Linden, Martial

    2010-09-01

    This study sought to investigate the component processes underlying the ability to imagine future events, using an individual-differences approach. Participants completed several tasks assessing different aspects of future thinking (i.e., fluency, specificity, amount of episodic details, phenomenology) and were also assessed with tasks and questionnaires measuring various component processes that have been hypothesized to support future thinking (i.e., executive processes, visual-spatial processing, relational memory processing, self-consciousness, and time perspective). The main results showed that executive processes were correlated with various measures of future thinking, whereas visual-spatial processing abilities and time perspective were specifically related to the number of sensory descriptions reported when specific future events were imagined. Furthermore, individual differences in self-consciousness predicted the subjective feeling of experiencing the imagined future events. These results suggest that future thinking involves a collection of processes that are related to different facets of future-event representation.

  8. Nuclear power plant component protection

    International Nuclear Information System (INIS)

    Michel, E.; Ruf, R.; Dorner, H.

    1976-01-01

    Described is a nuclear power plant installation which includes a concrete biological shield forming a pit in which a reactor pressure vessel is positioned. A steam generator on the outside of the shield is connected with the pressure vessel via coolant pipe lines which extend through the shield, the coolant circulation being provided by a coolant pump which is also on the outside of the shield. To protect these components on the outside of the shield and which are of mainly or substantially cylindrical shape, semicylindrical concrete segments are interfitted around them to form complete outer cylinders which are retained against outward separation radially from the components, by rings of high tensile steel which may be interspaced so closely that they provide, in effect, an outer steel cylinder. The invention is particularly applicable to pressurized-water coolant reactor installations

  9. Failures on stainless steel components

    International Nuclear Information System (INIS)

    Haenninen, H.

    1994-01-01

    Economic losses due to failure mainly by corrosion in process and nuclear industries are considered. In these industries the characteristics of different forms of corrosion and their economic effects are fairly well known and, especially, in nuclear industry the assessment of corrosion related costs has been comprehensive. In both industries the economic losses resulting from environmentally enhanced cracking of stainless steel components and the accompanying failures and outages have been considerable, owing as much to the frequency as the unpredictability of such occurrences. (orig.)

  10. Components of Sexual Identity

    Science.gov (United States)

    Shively, Michael G.; DeCecco, John P.

    1977-01-01

    This paper examines the four components of sexual identity: biological sex, gender identity, social sex-role, and sexual orientation. Theories about the development of each component and how they combine and conflict to form the individual's sexual identity are discussed. (Author)

  11. Towards Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Ahrendt, Peter; Larsen, Jan

    2005-01-01

    Cognitive component analysis (COCA) is here defined as the process of unsupervised grouping of data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. We have earlier demonstrated that independent components analysis is relevant for representing...

  12. 30 CFR 57.6160 - Main facilities.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main facilities. 57.6160 Section 57.6160...-Underground Only § 57.6160 Main facilities. (a) Main facilities used to store explosive material underground... facilities will not prevent escape from the mine, or cause detonation of the contents of another storage...

  13. On the Roche constants for main-sequence binaries

    International Nuclear Information System (INIS)

    Giannuzzi, M.A.

    1979-01-01

    The ratios C 1 /C 2 of the constants defining the equipotential surfaces which describe the external forms of the components of a close binary system have been calculated on the basis of evolutionary models. Theoretical systems have been considered allowing for a wide range of input parameters (masses and separation) and taking into account the evolutionary effects on the radii of the stars during their Main-Sequence lifetime. The systems have not undergone any transfer of matter and are representative of detached binaries with Main-sequence components. The ratios of the constants are confined in limited intervals and, for the highest values of the mass-ratios, they are clustered around the unit. (Auth.)

  14. Pilot RCM application to the Diablo Canyon main stream system

    International Nuclear Information System (INIS)

    Groff, C.R.; Beckham, P.E.; Bych, K.H.

    1988-01-01

    In 1986 Pacific Gas ampersand Electric Company (PG ampersand E) became extremely interested in reliability-centered maintenance (RCM) after the initial review of two successful Electric Power Research Institute sponsored projects. RCM was visualized as a methodology to common sensitize the burgeoning preventive maintenance (PM) program at the Diablo Canyon plant. RCM could further the uses of predictive and condition-monitoring techniques, as well as eliminate maintenance on components whose failures were noncritical. An extensive review of maintenance and operation experience data, in conjunction with plant staff recommendations and a prioritization according to maintenance expenditures and operational/safety significance, produced the selected system: the turbine main steam supply system (main steam). The pilot project segmented the main steam system into eight subsystems to aid in analysis: (a) main steam isolation valves, (b) auxiliary feedwater pump turbine, (c) overpressure protection (steam dump), (d) main feedwater pump turbines, (e) main steam, (f) main turbine, (g) steam blowdown, and (h) moisture separator reheaters. System analysis activities, including the preparation of functional failure analyses, failure modes and effects analyses, and logic model analyses, were conducted in parallel with corrective and preventive maintenance data-gathering activities to maximize project team personnel participation during the project. Results and lessons learned are summarized

  15. Understanding, modeling, and improving main-memory database performance

    OpenAIRE

    Manegold, S.

    2002-01-01

    textabstractDuring the last two decades, computer hardware has experienced remarkable developments. Especially CPU (clock-)speed has been following Moore's Law, i.e., doubling every 18 months; and there is no indication that this trend will change in the foreseeable future. Recent research has revealed that database performance, even with main-memory based systems, can hardly benefit from the ever increasing CPU power. The reason for this is that the performance of other hardware components h...

  16. s-Processing from MHD-induced mixing and isotopic abundances in presolar SiC grains

    Science.gov (United States)

    Palmerini, S.; Trippella, O.; Busso, M.; Vescovi, D.; Petrelli, M.; Zucchini, A.; Frondini, F.

    2018-01-01

    In the past years the observational evidence that s-process elements from Sr to Pb are produced by stars ascending the so-called Asymptotic Giant Branch (or "AGB") could not be explained by self-consistent models, forcing researchers to extensive parameterizations. The crucial point is to understand how protons can be injected from the envelope into the He-rich layers, yielding the formation of 13C and then the activation of the 13C (α,n)16O reaction. Only recently, attempts to solve this problem started to consider quantitatively physically-based mixing mechanisms. Among them, MHD processes in the plasma were suggested to yield mass transport through magnetic buoyancy. In this framework, we compare results of nucleosynthesis models for Low Mass AGB Stars (M≲ 3M⊙), developed from the MHD scenario, with the record of isotopic abundance ratios of s-elements in presolar SiC grains, which were shown to offer precise constraints on the 13C reservoir. We find that n-captures driven by magnetically-induced mixing can indeed account for the SiC data quite well and that this is due to the fact that our 13C distribution fulfils the above constraints rather accurately. We suggest that similar tests should be now performed using different physical models for mixing. Such comparisons would indeed improve decisively our understanding of the formation of the neutron source.

  17. Isolators Including Main Spring Linear Guide Systems

    Science.gov (United States)

    Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

    2017-01-01

    Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

  18. 2-component heating systems

    Energy Technology Data Exchange (ETDEWEB)

    Radtke, W

    1987-03-01

    The knowledge accumulated only recently of the damage to buildings and the hazards of formaldehyde, radon and hydrocarbons has been inducing louder calls for ventilation, which, on their part, account for the fact that increasing importance is being attached to the controlled ventilation of buildings. Two-component heating systems provide for fresh air and thermal comfort in one. While the first component uses fresh air blown directly and controllably into the rooms, the second component is similar to the Roman hypocaustic heating systems, meaning that heated outer air is circulating under the floor, thus providing for hot surfaces and thermal comfort. Details concerning the two-component heating system are presented along with systems diagrams, diagrams of the heating system and tables identifying the respective costs. Descriptions are given of the two systems components, the fast heat-up, the two-component made, the change of air, heat recovery and control systems. Comparative evaluations determine the differences between two-component heating systems and other heating systems. Conclusive remarks are dedicated to energy conservation and comparative evaluations of costs. (HWJ).

  19. Replaceable LMFBR core components

    International Nuclear Information System (INIS)

    Evans, E.A.; Cunningham, G.W.

    1976-01-01

    Much progress has been made in understanding material and component performance in the high temperature, fast neutron environment of the LMFBR. Current data have provided strong assurance that the initial core component lifetime objectives of FFTF and CRBR can be met. At the same time, this knowledge translates directly into the need for improved core designs that utilize improved materials and advanced fuels required to meet objectives of low doubling times and extended core component lifetimes. An industrial base for the manufacture of quality core components has been developed in the US, and all procurements for the first two core equivalents for FFTF will be completed this year. However, the problem of fabricating recycled plutonium while dramatically reducing fabrication costs, minimizing personnel exposure, and protecting public health and safety must be addressed

  20. Explosive Components Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  1. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  2. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  3. Impact test of components

    International Nuclear Information System (INIS)

    Borsoi, L.; Buland, P.; Labbe, P.

    1987-01-01

    Stops with gaps are currently used to support components and piping: it is simple, low cost, efficient and permits free thermal expansion. In order to keep the nonlinear nature of stops, such design is often modeled by beam elements (for the component) and nonlinear springs (for the stops). This paper deals with the validity and the limits of these models through the comparison of computational and experimental results. The experimental results come from impact laboratory tests on a simplified mockup. (orig.)

  4. Quasi-periodic latitudinal shift of Saturn's main auroral emission

    Science.gov (United States)

    Roussos, E.; Palmaerts, B.; Grodent, D. C.; Radioti, K.; Krupp, N.; Yao, Z.

    2017-12-01

    The main component of the ultraviolet auroral emissions at Saturn consists in a ring of emission around each pole of the planet. This main ring of emission has been revealed to oscillate by a few degrees in the prenoon-premidnight direction with a period of 10.8h. This auroral oscillation is thought to be induced by a rotating external magnetospheric current system associated with the planetary period oscillations. Here we report, by means of auroral imaging sequences obtained with the Ultraviolet Imaging Spectrograph (UVIS) on board the Cassini spacecraft, the first direct observation of an additional motion of the main emission superimposed to this oscillation. The whole main emission ring exhibits step-like displacements in latitude mainly towards dayside, decoupled from the 10.8h oscillation. These latitude shifts recur around every hour, which is a typical short periodicity at Saturn previously identified in the aurora intensity, in the charged particle fluxes and in the magnetic field. This unique observation directly demonstrates what has been inferred from past in-situ and remote measurements: the 1-hour periodicities reveal a global and fundamental magnetospheric oscillation mode that acts independently of the local magnetospheric conditions. However, the magnetospheric mechanism responsible for these 1-hour auroral shifts is still unknown. It is possible that Alfvén waves inducing hourly magnetic fluctuations might also modify the place where the field-aligned electrons precipitate in the ionosphere and produce the main emission.

  5. Main considerations for modelling a station blackout scenario with trace

    International Nuclear Information System (INIS)

    Querol, Andrea; Turégano, Jara; Lorduy, María; Gallardo, Sergio; Verdú, Gumersindo

    2017-01-01

    In the nuclear safety field, the thermal hydraulic phenomena that take place during an accident in a nuclear power plant is of special importance. One of the most studied accidents is the Station BlackOut (SBO). The aim of the present work is the analysis of the PKL integral test facility nodalization using the thermal-hydraulic code TRACE5 to reproduce a SBO accidental scenario. The PKL facility reproduces the main components of the primary and secondary systems of its reference nuclear power plant (Philippsburg II). The results obtained with different nodalization have been compared: 3D vessel vs 1D vessel, Steam Generator (SG) modelling using PIPE or TEE components and pressurizer modelling with PIPE or PRIZER components. Both vessel nodalization (1D vessel and 3D vessel) reproduce the physical phenomena of the experiment. However, there are significant discrepancies between them. The appropriate modelling of the SG is also relevant in the results. Regarding the other nodalization (PIPE or TEE components for SG and PIPE or PRIZER components for pressurizer), do not produce relevant differences in the results. (author)

  6. Main considerations for modelling a station blackout scenario with trace

    Energy Technology Data Exchange (ETDEWEB)

    Querol, Andrea; Turégano, Jara; Lorduy, María; Gallardo, Sergio; Verdú, Gumersindo, E-mail: anquevi@upv.es, E-mail: jaturna@upv.es, E-mail: maloral@upv.es, E-mail: sergalbe@iqn.upv.es, E-mail: gverdu@iqn.upv.es [Instituto Universitario de Seguridad Industrial, Radiofísica y Medioambiental (ISIRYM), Universitat Politècnica de València (Spain)

    2017-07-01

    In the nuclear safety field, the thermal hydraulic phenomena that take place during an accident in a nuclear power plant is of special importance. One of the most studied accidents is the Station BlackOut (SBO). The aim of the present work is the analysis of the PKL integral test facility nodalization using the thermal-hydraulic code TRACE5 to reproduce a SBO accidental scenario. The PKL facility reproduces the main components of the primary and secondary systems of its reference nuclear power plant (Philippsburg II). The results obtained with different nodalization have been compared: 3D vessel vs 1D vessel, Steam Generator (SG) modelling using PIPE or TEE components and pressurizer modelling with PIPE or PRIZER components. Both vessel nodalization (1D vessel and 3D vessel) reproduce the physical phenomena of the experiment. However, there are significant discrepancies between them. The appropriate modelling of the SG is also relevant in the results. Regarding the other nodalization (PIPE or TEE components for SG and PIPE or PRIZER components for pressurizer), do not produce relevant differences in the results. (author)

  7. Passive components used in power converters

    CERN Document Server

    Rufer, A; Barrade, P

    2006-01-01

    In power converters, passive components play an important role, and have in general specific nature and properties. The goal of this tutorial is to give an overview, first on inductive components for power conversion, and second on dedicated power capacitors. In a third part, new components— supercapacitors—will be presented. Generally, inductors for power applications must be custom designed. In this tutorial, the most important effects encountered when realising inductive components will be presented in the first part, without entering into the detailed design of such components. For that purpose, the referenced documents that have served as a base for this tutorial must be consulted [1], [2], and mainly [3]. The second part of this tutorial (Capacitors used in power electronics) is dedicated to power capacitors. Unlike inductors, capacitors cannot be specifically designed, but must be selected from a manufacturer’s list of components. Here, the documentation corresponds to a subset of Ref. [4] that h...

  8. COPD phenotype description using principal components analysis

    DEFF Research Database (Denmark)

    Roy, Kay; Smith, Jacky; Kolsum, Umme

    2009-01-01

    BACKGROUND: Airway inflammation in COPD can be measured using biomarkers such as induced sputum and Fe(NO). This study set out to explore the heterogeneity of COPD using biomarkers of airway and systemic inflammation and pulmonary function by principal components analysis (PCA). SUBJECTS...... AND METHODS: In 127 COPD patients (mean FEV1 61%), pulmonary function, Fe(NO), plasma CRP and TNF-alpha, sputum differential cell counts and sputum IL8 (pg/ml) were measured. Principal components analysis as well as multivariate analysis was performed. RESULTS: PCA identified four main components (% variance...... associations between the variables within components 1 and 2. CONCLUSION: COPD is a multi dimensional disease. Unrelated components of disease were identified, including neutrophilic airway inflammation which was associated with systemic inflammation, and sputum eosinophils which were related to increased Fe...

  9. Multiscale principal component analysis

    International Nuclear Information System (INIS)

    Akinduko, A A; Gorban, A N

    2014-01-01

    Principal component analysis (PCA) is an important tool in exploring data. The conventional approach to PCA leads to a solution which favours the structures with large variances. This is sensitive to outliers and could obfuscate interesting underlying structures. One of the equivalent definitions of PCA is that it seeks the subspaces that maximize the sum of squared pairwise distances between data projections. This definition opens up more flexibility in the analysis of principal components which is useful in enhancing PCA. In this paper we introduce scales into PCA by maximizing only the sum of pairwise distances between projections for pairs of datapoints with distances within a chosen interval of values [l,u]. The resulting principal component decompositions in Multiscale PCA depend on point (l,u) on the plane and for each point we define projectors onto principal components. Cluster analysis of these projectors reveals the structures in the data at various scales. Each structure is described by the eigenvectors at the medoid point of the cluster which represent the structure. We also use the distortion of projections as a criterion for choosing an appropriate scale especially for data with outliers. This method was tested on both artificial distribution of data and real data. For data with multiscale structures, the method was able to reveal the different structures of the data and also to reduce the effect of outliers in the principal component analysis

  10. Main approaches to the study of loss

    Directory of Open Access Journals (Sweden)

    Burina E. A.

    2016-07-01

    Full Text Available this article presents the main approaches to the concepts of grief and loss study. The article describes the contribution of E. Lindemann, Z. Freud, J. Bowlby, F.E. Vasiluk, and E. Kubler-Ross. The research also contains the main forms of grief and some stadial models within the scope of problematics.

  11. Nitrogen chronology of massive main sequence stars

    NARCIS (Netherlands)

    Köhler, K.; Borzyszkowski, M.; Brott, I.; Langer, N.; de Koter, A.

    2012-01-01

    Context. Rotational mixing in massive main sequence stars is predicted to monotonically increase their surface nitrogen abundance with time. Aims. We use this effect to design a method for constraining the age and the inclination angle of massive main sequence stars, given their observed luminosity,

  12. Riigikogu maine ja armastus / Aune Past

    Index Scriptorium Estoniae

    Past, Aune, 1954-

    2007-01-01

    Autor arutleb Riigikogu maine üle, toetudes TÜ ajakirjanduse ja kommunikatsiooni osakonna 2007. aastal tehtud uuringu tulemustele. Riigikogu liikmete maine paraneks, kui neil endil oleks selge, mis eesmärgil Toompeale mindi ja sellest siis ka rahvale kõneldaks

  13. Optical CDMA components requirements

    Science.gov (United States)

    Chan, James K.

    1998-08-01

    Optical CDMA is a complementary multiple access technology to WDMA. Optical CDMA potentially provides a large number of virtual optical channels for IXC, LEC and CLEC or supports a large number of high-speed users in LAN. In a network, it provides asynchronous, multi-rate, multi-user communication with network scalability, re-configurability (bandwidth on demand), and network security (provided by inherent CDMA coding). However, optical CDMA technology is less mature in comparison to WDMA. The components requirements are also different from WDMA. We have demonstrated a video transport/switching system over a distance of 40 Km using discrete optical components in our laboratory. We are currently pursuing PIC implementation. In this paper, we will describe the optical CDMA concept/features, the demonstration system, and the requirements of some critical optical components such as broadband optical source, broadband optical amplifier, spectral spreading/de- spreading, and fixed/programmable mask.

  14. Solid state lighting component

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Thomas; Keller, Bernd; Tarsa, Eric; Ibbetson, James; Morgan, Frederick; Dowling, Kevin; Lys, Ihor

    2017-10-17

    An LED component according to the present invention comprising an array of LED chips mounted on a submount with the LED chips capable of emitting light in response to an electrical signal. The array can comprise LED chips emitting at two colors of light wherein the LED component emits light comprising the combination of the two colors of light. A single lens is included over the array of LED chips. The LED chip array can emit light of greater than 800 lumens with a drive current of less than 150 milli-Amps. The LED chip component can also operate at temperatures less than 3000 degrees K. In one embodiment, the LED array is in a substantially circular pattern on the submount.

  15. An integrated magnetics component

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to an integrated magnetics component comprising a magnetically permeable core comprising a base member extending in a horizontal plane and first, second, third and fourth legs protruding substantially perpendicularly from the base member. First, second, third...... and fourth output inductor windings are wound around the first, second, third and fourth legs, respectively. A first input conductor of the integrated magnetics component has a first conductor axis and extends in-between the first, second, third and fourth legs to induce a first magnetic flux through a first...... flux path of the magnetically permeable core. A second input conductor of the integrated magnetics component has a second coil axis extending substantially perpendicularly to the first conductor axis to induce a second magnetic flux through a second flux path of the magnetically permeable core...

  16. Stochastic Models of Defects in Wind Turbine Drivetrain Components

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard

    2013-01-01

    The drivetrain in a wind turbine nacelle typically consists of a variety of heavily loaded components, like the main shaft, bearings, gearbox and generator. The variations in environmental load challenge the performance of all the components of the drivetrain. Failure of each of these components...

  17. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  18. New Measurements of s-Process Enrichments in Planetary Nebulae from High-Resolution Near-Infrared Spectra

    Science.gov (United States)

    Dinerstein, Harriet L.; Karakas, Amanda; Sterling, Nicholas C.; Kaplan, Kyle

    2017-06-01

    We present preliminary results from a high-spectral resolution survey of near-infrared emission lines of neutron-capture elements in planetary nebulae using the Immersion Grating Infrared Spectrometer, IGRINS (Park et al. 2014, SPIE. 9147, 1), which spans the H- and K-bands at spectral resolving power R ≈ 45,000. Both the [Kr III] and [Se IV] lines identified by Dinerstein (2001, ApJL, 550, L223) are seen in nearly all of an initial sample of ≈ 15 nebulae, with improved accuracy over earlier studies based on lower-resolution data (Sterling & Dinerstein 2008, ApJS, 174, 158; Sterling, Porter, & Dinerstein 2015, ApJS, 218, 25). Several new detections of the [Rb IV], [Cd IV], and [Ge VI] lines identified by Sterling et al. (2016, ApJL, 819, 9), as well as a [Br V] line, were made. About half the objects in this sample descend from stars with [Fe/H] = -0.7 ± 0.2 dex, while the remainder have -0.3 ≤ [Fe/H] ≤ 0. We compare the measured enhancements of Se, Kr, Rb, and Cd with predictions of their production by slow-neutron captures (the s-process) during the AGB from theoretical evolutionary models for the corresponding metallicities and various initial masses. New nucleosynthesis calculations were carried out for [Fe/H] = -0.7 for initial masses between 1.1 and 3 M⊙ using the Monash stellar evolution and post-processing codes described in Karakas & Lugaro (2016, ApJ, 825, 26), which provides the nucleosynthesis predictions for the metal-rich end of our sample. The Monash models predict enrichments larger by factors of two or more than those from FRUITY (Cristallo et al. 2015, ApJS, 219, 40) and NuGRID (Pignatari et al. 2016, ApJS, 225, 24) models for the same masses and metallicities. We find that the Monash models are in substantially better agreement than the others with the abundances derived from the IGRINS observations.This work is based on data taken at the McDonald Observatory of the University of Texas at Austin. IGRINS was developed with support from

  19. Radioecological monitoring of south Caucasus - main results

    International Nuclear Information System (INIS)

    Tsitskishvili, M.S; Chazaradze, R.E.; Katamadze, N.M.; Intskirveli, L.N.; Chxartishvili, A.G.; Gugushvili, B.S.; Tsitskishvili, N.B.; Saneblidze, O.I.

    2002-01-01

    Basing in surrounding ambience at present radioactive on its origin possible to split into two main groups: artificial and natural radioactive. How is obvious from the most names, natural based in the nature nearly with first days of its shaping and are its by the component. Artificial - not existed or not saved in the nature - having radioactive characteristics isotopes 'appeared' as a result artificial doing atoms. Getting into surrounding ambience as a result person activity artificial (systematically or episodic detectable there) possible conditionally split into three subgroups. Artificial radioactive isotopes, got into surrounding natural ambience as a result anthropogenic activity, in principal (ecological) are distinguished from the natural radioactive isotopes by fetters and particularities to migration on ecological chains, but, consequently, and nature 'influence'. Sufficiently remind that if in biosphere practically no ecological niches, in which goes an accumulation natural, capable to give significant dozing effect; for the artificial (isotopes of iodine, isotopes a strontium, caesium) exactly ability be accumulated in separate 'niches' ecological chain or in separate organs or weaving an organism (thyroid gland for the iodine) do artificial radioisotopes hygienic extremely dangerous. Location of Caucasus in the area of approximate location of firing ranges of test, (after the series 1961-1962 conducted by USSR in the North hemisphere this were test China) and damages on Chernobyl, in the area of most intensity stratosphere - troposphere exchange, manifests themselves: 1. Early approach spring-year maximum; 2. More clear maximum in the seasonal move; 3. The Greater fallout levels in contrast with other regions of country; 4. The Greater 'sensitivity' to 'fresh' products. Structure of global fallout on the under investigation region is stipulated: 1. Decreasing the fallout levels from the north on the south. 2. Vertical fallout levels (growth with the

  20. Validating Timed Component Contracts

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Liu, Shaoying; Olsen, Petur

    2015-01-01

    This paper presents a technique for testing software components with contracts that specify functional behavior, synchronization, as well as timing behavior. The approach combines elements from unit testing with model-based testing techniques for timed automata. The technique is implemented...... in an online testing tool, and we demonstrate its use on a concrete use case....

  1. Euler principal component analysis

    NARCIS (Netherlands)

    Liwicki, Stephan; Tzimiropoulos, Georgios; Zafeiriou, Stefanos; Pantic, Maja

    Principal Component Analysis (PCA) is perhaps the most prominent learning tool for dimensionality reduction in pattern recognition and computer vision. However, the ℓ 2-norm employed by standard PCA is not robust to outliers. In this paper, we propose a kernel PCA method for fast and robust PCA,

  2. Hybrid wars’ information component

    Directory of Open Access Journals (Sweden)

    T. A. Nevskaya

    2015-01-01

    Full Text Available The war of the new generation - hybrid war, the information component which is directed not so much on the direct destruction of the enemy, how to achieve the goals without warfare. Fighting in the information field is no less important than immediate military action.

  3. Spain's nuclear components industry

    International Nuclear Information System (INIS)

    Kaibel, E.

    1985-01-01

    Spanish industrial participation in supply of components for nuclear power plants has grown steadily over the last fifteen years. The share of Spanish companies in work for the five second generation nuclear power plants increased to 50% of total capital investments. The necessity to maintain Spanish technology and production in the nuclear field is emphasized

  4. The market for components

    International Nuclear Information System (INIS)

    Simon, M.; Stoelzl, D.

    1986-01-01

    The offers of the German nuclear components industry are shown at the examples of some masterpieces of engineering and their delivery capacities. Then, the success achieved with exports up to now are referred to. The forecast includes the demand, the side conditions of the technical competition, and the pricing and financing situation. (UA) [de

  5. Bayesian Independent Component Analysis

    DEFF Research Database (Denmark)

    Winther, Ole; Petersen, Kaare Brandt

    2007-01-01

    In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...

  6. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  7. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  8. Monitoring distributed object and component communication

    NARCIS (Netherlands)

    Diakov, N.K.

    2004-01-01

    This thesis presents our work in the area of monitoring distributed software applications (DSAs). We produce three main results: (1) a design approach for building monitoring systems, (2) a design of a system for MOnitoring Distributed Object and Component Communication (MODOCC) behavior in

  9. External vibrations measurement of reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, S A [Nuclear Electric plc, Barnwood (United Kingdom); Sugden, J [Magnox Electric, Berkeley (United Kingdom)

    1997-12-31

    The paper outlines the use of External Vibration Monitoring for remote vibration assessment of internal reactor components. The main features of the technique are illustrated by a detailed examination of the specific application to the problem of Heysham 2 Fuel Plug Unit monitoring. (author). 6 figs.

  10. Measurement of the radiative capture cross section of the s-process branching points 204Tl and 171Tm at the n_TOF facility (CERN)

    Science.gov (United States)

    Casanovas, A.; Domingo-Pardo, C.; Guerrero, C.; Lerendegui-Marco, J.; Calviño, F.; Tarifeño-Saldivia, A.; Dressler, R.; Heinitz, S.; Kivel, N.; Quesada, J. M.; Schumann, D.; Aberle, O.; Alcayne, V.; Andrzejewski, J.; Audouin, L.; Bécares, V.; Bacak, M.; Barbagallo, M.; Bečvář, F.; Bellia, G.; Berthoumieux, E.; Billowes, J.; Bosnar, D.; Brown, A.; Busso, M.; Caamaño, M.; Caballero-Ontanaya, L.; Calviani, M.; Cano-Ott, D.; Cerutti, F.; Chen, Y. H.; Chiaveri, E.; Colonna, N.; Cortés, G.; Cortés-Giraldo, M. A.; Cosentino, L.; Cristallo, S.; Damone, L. A.; Diakaki, M.; Dietz, M.; Dupont, E.; Durán, I.; Eleme, Z.; Fernández-Domínguez, B.; Ferrari, A.; Ferreira, P.; Finocchiaro, P.; Furman, V.; Göbel, K.; Gawlik, A.; Gilardoni, S.; Glodariu, T.; Gonçalves, I. F.; González-Romero, E.; Gunsing, F.; Heyse, J.; Jenkins, D. G.; Käppeler, F.; Kadi, Y.; Katabuchi, T.; Kimura, A.; Kokkoris, M.; Kopatch, Y.; Krtička, M.; Kurtulgil, D.; Ladarescu, I.; Lederer-Woods, C.; Meo, S. Lo; Lonsdale, S. J.; Macina, D.; Martínez, T.; Masi, A.; Massimi, C.; Mastinu, P.; Mastromarco, M.; Matteucci, F.; Maugeri, E. A.; Mazzone, A.; Mendoza, E.; Mengoni, A.; Michalopoulou, V.; Milazzo, P. M.; Mingrone, F.; Musumarra, A.; Negret, A.; Nolte, R.; Ogállar, F.; Oprea, A.; Patronis, N.; Pavlik, A.; Perkowski, J.; Persanti, L.; Porras, I.; Praena, J.; Radeck, D.; Ramos, D.; Rauscher, T.; Reifarth, R.; Rochman, D.; Sabaté-Gilarte, M.; Saxena, A.; Schillebeeckx, P.; Simone, S.; Smith, A. G.; Sosnin, N. V.; Stamatopoulos, A.; Tagliente, G.; Tain, J. L.; Talip, T.; Tassan-Got, L.; Tsinganis, A.; Ulrich, J.; Valenta, S.; Vannini, G.; Variale, V.; Vaz, P.; Ventura, A.; Vlachoudis, V.; Vlastou, R.; Wallner, A.; Woods, P. J.; Wright, T.; Žugec, P.; Köster, U.

    2018-05-01

    The neutron capture cross section of some unstable nuclei is especially relevant for s-process nucleosynthesis studies. This magnitude is crucial to determine the local abundance pattern, which can yield valuable information of the s-process stellar environment. In this work we describe the neutron capture (n,γ) measurement on two of these nuclei of interest, 204Tl and 171Tm, from target production to the final measurement, performed successfully at the n_TOF facility at CERN in 2014 and 2015. Preliminary results on the ongoing experimental data analysis will also be shown. These results include the first ever experimental observation of capture resonances for these two nuclei.

  11. Hillshades for the main 8 Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These hillshade datasets were derived from USGS 7.5' DEM Quads for the main 8 Hawaiian Islands. Individual DEM quads were first converted to a common datum, and...

  12. Nuclear power station main control room habitability

    International Nuclear Information System (INIS)

    Paschal, W.B.; Knous, W.S.

    1989-01-01

    The main control room at a nuclear power station must remain habitable during a variety of plant conditions and postulated events. The control room habitability requirement and the function of the heating, ventilating, air-conditioning, and air treatment system are to control environmental factors, such as temperature, pressure, humidity, radiation, and toxic gas. Habitability requirements provide for the safety of personnel and enable operation of equipment required to function in the main control room. Habitability as an issue has been gaining prominence with the Advisor Committee of Reactor Safeguards and the Nuclear Regulatory Commission since the incident at Three Mile Island. Their concern is the ability of the presently installed habitability systems to control the main control room environment after an accident. This paper discusses main control room HVAC systems; the concern, requirements, and results of NRC surveys and notices; and an approach to control room habitability reviews

  13. Seasonal Composite Chlorophyll Concentrations - Gulf of Maine

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This personal geodatabase contains raster images of chlorophyll concentrations in the Gulf of Maine. These raster images are seasonal composites, and were calculated...

  14. Collins' bypass for the main ring

    International Nuclear Information System (INIS)

    Ohnuma, S.

    1982-01-01

    Design of the bypass for the main ring at Fermilab is discussed. Specific design features discussed include space, path length, geometric closure, matching of betatron functions, and external dispersion. Bypass parameters are given

  15. Monthly Composite Chlorophyll Concentrations - Gulf of Maine

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This personal geodatabase contains raster images of chlorophyll concentrations in the Gulf of Maine. These raster images are monthly composites, and were calculated...

  16. 2015 City of Portland, Maine, Lidar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — 2015 City of Portland Maine Lidar Data Acquisition and Processing Woolpert Order No. 75564 Contractor: Woolpert, Inc. This task is for a high resolution data set of...

  17. 2016 USGS Lidar DEM: Maine QL2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Product: These are Digital Elevation Model (DEM) data for Franklin, Oxford, Piscataquis, and Somerset Counties, Maine as part of the required deliverables for the...

  18. S-process nucleosynthesis in low mass AGB Stars: do we really need an improved determination of the 13C(α, n)16O reaction rate?

    International Nuclear Information System (INIS)

    Cristallo, S.; Straniero, O.; Gallino, R.

    2005-01-01

    Thermally pulsing Asymptotic Giant Branch stars are responsible for the nucleosynthesis of the main component of the cosmic s-elements. The most important neutron source is the 13 C(α, n) 16 O reaction. Owing to the presence of a subthreshold resonance, the low energy extrapolation is a rather complex task. The rate quoted in the literature differ up to a factor of 4 at typical stellar energies. The latest improvements in computer power allows us to calculate the evolution of TP-AGB stars coupled with a full nuclear network, extending from hydrogen to lead. Here we discuss the effects of the variation of the 13 C(α, n) 16 O rate on the predicted neutron capture nucleosynthesis

  19. GMES Space Component: Programme overview

    Science.gov (United States)

    Aschbacher, J.; Milagro-Perez, M. P.

    2012-04-01

    The European Union (EU) and the European Space Agency (ESA) have developed the Global Monitoring for Environment and Security (GMES) programme as Europe's answer to the vital need for joined-up data about our climate, environment and security. Through a unique combination of satellite, atmospheric and Earth-based monitoring systems, the initiative will provide new insight into the state of the land, sea and air, providing policymakers, scientists, businesses and the public with accurate and timely information. GMES capabilities include monitoring and forecasting of climatic change, flood risks, soil and coastal erosion, crop and fish resources, air pollution, greenhouse gases, iceberg distribution and snow cover, among others. To accomplish this, GMES has been divided into three main components: Space, In-situ and Services. The Space Component, led by ESA, comprises five types of new satellites called Sentinels that are being developed by ESA specifically to meet the needs of GMES, the first of which to be launched in 2013. These missions carry a range of technologies, such as radar and multi-spectral imaging instruments for land, ocean and atmospheric monitoring. In addition, access to data from the so-called Contributing Missions guarantees that European space infrastructure is fully used for GMES. An integrated Ground Segment ensures access to Sentinels and Contributing Missions data. The in-situ component, under the coordination of the European Environment Agency (EEA), is composed of atmospheric and Earth based monitoring systems, and based on established networks and programmes at European and international levels. The European Commission is in charge of implementing the services component of GMES and of leading GMES overall. GMES services, fed with data from the Space and In-situ components, will provide essential information in five main domains, atmosphere, ocean and land monitoring as well as emergency response and security. Climate change has been added

  20. Molecular clusters of the main group elements

    CERN Document Server

    Driess, Matthias

    2008-01-01

    ""To summarize, Molecular Clusters of the Main Group Elements is certainly not a popular science book, nor is it a textbook; it is a very good, up-to-date collection of articles for the specialist. Als Fazit bleibt: Molecular Clusters of the Main Group Elements ist sicher kein populissenschaftliches Werk, auch kein Lehrbuch, aber eine gelungene, hoch aktuelle Zusammenstellung fen interessierten Fachmann."" -Michael Ruck, TU Dresden, Angewandte Chemie, 2004 - 116/36 + International Edition 2004 - 43/36

  1. Revisiting Reuse in Main Memory Database Systems

    OpenAIRE

    Dursun, Kayhan; Binnig, Carsten; Cetintemel, Ugur; Kraska, Tim

    2016-01-01

    Reusing intermediates in databases to speed-up analytical query processing has been studied in the past. Existing solutions typically require intermediate results of individual operators to be materialized into temporary tables to be considered for reuse in subsequent queries. However, these approaches are fundamentally ill-suited for use in modern main memory databases. The reason is that modern main memory DBMSs are typically limited by the bandwidth of the memory bus, thus query execution ...

  2. Components of Co-creation

    DEFF Research Database (Denmark)

    Tanev, Stoyan

    2009-01-01

    , such an approach misses the advantages of an empirically driven quantitative approach that benefits from larger size samples and is more appropriate for theory building through the development and testing of hypotheses. It is important, therefore, to seek the development of a research methodology that combines...... the benefits of both qualitative and quantitative research approaches for studying the nature of value co-creation. The article provides a first attempt to identify the main research steps of such a methodology. It provides some preliminary results on the key components of value co-creation between firms...... the inner logic of the value co-creation phenomenon as well as the nature of the results reported in this article. The specific nature of the results was found to be suitable for the application of small-N techniques such as the Qualitative Comparative Analysis (QCA) technique which combines the advantages...

  3. Structural analysis of nuclear components

    International Nuclear Information System (INIS)

    Ikonen, K.; Hyppoenen, P.; Mikkola, T.; Noro, H.; Raiko, H.; Salminen, P.; Talja, H.

    1983-05-01

    THe report describes the activities accomplished in the project 'Structural Analysis Project of Nuclear Power Plant Components' during the years 1974-1982 in the Nuclear Engineering Laboratory at the Technical Research Centre of Finland. The objective of the project has been to develop Finnish expertise in structural mechanics related to nuclear engineering. The report describes the starting point of the research work, the organization of the project and the research activities on various subareas. Further the work done with computer codes is described and also the problems which the developed expertise has been applied to. Finally, the diploma works, publications and work reports, which are mainly in Finnish, are listed to give a view of the content of the project. (author)

  4. LECOTELO - conceptual design, testings and realisation of the main vessel

    International Nuclear Information System (INIS)

    Ioan, M.; Hororoi, M.

    2013-01-01

    Lead Corrosion Testing Loop (LECOTELO) facility was conceived to assure all conditions requested by corrosion/erosion tests in pure hot lead for different materials. The main vessel will receive at least 36 different material samples; each of them must be swept on both sides by a lead flow at a very well known speed. Taking into account that the inner system of this vessel is rather complex, it is very important to know the behavior of the vessel at different speeds of the lead flow around the samples. After many simulations of different configurations of the inner components, it was obtained the best inner geometry of the flow which provides the minimum pressure loss between inlet and outlet vessel. Consequently, the design of vessel components was changed in accordance with these new results of simulations and in this moment they are in the manufacturing process. (authors)

  5. Digital Components in Swedish NPP Power Systems

    International Nuclear Information System (INIS)

    Karlsson, Mattias; Eriksson, Tage

    2015-01-01

    Swedish nuclear power plants have over the last 20 years of operation modernised or exchanged several systems and components of the electrical power system. Within these works, new components based on digital technology have been employed in order to realize functionality that was previously achieved by using electro-mechanical or analogue technology. Components and systems such as relay protection, rectifiers, inverters, variable speed drives and diesel-generator sets are today equipped with digital components. Several of the systems and components fulfil functions with a safety-role in the NPP. Recently, however, a number of incidents have occurred which highlight deficiencies in the design or HMI of the equipment, which warrants questions whether there are generic problems with some applications of digital components that needs to be addressed. The use of digital components has presented cost effective solutions, or even the only available solution on the market enabling a modernisation. The vast majority of systems using digital components have been operating without problems and often contribute to improved safety but the challenge of non-detectable, or non-identifiable, failure modes remain. In this paper, the extent to which digital components are used in Swedish NPP power systems will be presented including a description of typical applications. Based on data from maintenance records and fault reports, as well as interviews with designers and maintenance personnel, the main areas where problems have been encountered and where possible risks have been identified will be described. The paper intends to investigate any 'tell-tales' that could give signals of unwanted behaviour. Furthermore, particular benefits experienced by using digital components will be highlighted. The paper will also discuss the safety relevance of these findings and suggest measures to improve safety in the application of digital components in power systems. (authors)

  6. (ajst) additive main effects and multiplicative

    African Journals Online (AJOL)

    2013-08-02

    Aug 2, 2013 ... genotypes assessed by biplot analysis showed that the most stable ... biplot is a useful tool for the analysis of multi-environment trial (MET) data. ... multiplicative components, extracting first the additive ... The AMMI analysis of variance of cassava harvest index of the 8 .... wheat mega-environments in Iran.

  7. Adaptable component frameworks

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Simonsen, Bo

    2009-01-01

    The CPH STL is a special edition of the STL, the containers and algorithms part of the C++ standard library. The specification of the generic components of the STL is given in the C++ standard. Any implementation of the STL, e.g. the one that ships with your standard-compliant C++ compiler, should...... for vector, which is undoubtedly the most used container of the C++ standard library. In particular, we specify the details of a vector implementation that is safe with respect to referential integrity and strong exception safety. Additionally, we report the experiences and lessons learnt from...... the development of component frameworks which we hope to be of benefit to persons engaged in the design and implementation of generic software libraries....

  8. Components of laboratory accreditation.

    Science.gov (United States)

    Royal, P D

    1995-12-01

    Accreditation or certification is a recognition given to an operation or product that has been evaluated against a standard; be it regulatory or voluntary. The purpose of accreditation is to provide the consumer with a level of confidence in the quality of operation (process) and the product of an organization. Environmental Protection Agency/OCM has proposed the development of an accreditation program under National Environmental Laboratory Accreditation Program for Good Laboratory Practice (GLP) laboratories as a supplement to the current program. This proposal was the result of the Inspector General Office reports that identified weaknesses in the current operation. Several accreditation programs can be evaluated and common components identified when proposing a structure for accrediting a GLP system. An understanding of these components is useful in building that structure. Internationally accepted accreditation programs provide a template for building a U.S. GLP accreditation program. This presentation will discuss the traditional structure of accreditation as presented in the Organization of Economic Cooperative Development/GLP program, ISO-9000 Accreditation and ISO/IEC Guide 25 Standard, and the Canadian Association for Environmental Analytical Laboratories, which has a biological component. Most accreditation programs are managed by a recognized third party, either privately or with government oversight. Common components often include a formal review of required credentials to evaluate organizational structure, a site visit to evaluate the facility, and a performance evaluation to assess technical competence. Laboratory performance is measured against written standards and scored. A formal report is then sent to the laboratory indicating accreditation status. Usually, there is a scheduled reevaluation built into the program. Fee structures vary considerably and will need to be examined closely when building a GLP program.

  9. Fabricating nuclear components

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Activities of the Nuclear Engineering Division of Vickers Ltd., particularly fabrication of long slim tubular components for power reactors and the construction of irradiation loops and rigs, are outlined. The processes include hydraulic forming for fabrication of various types of tubes and outer cases of fuel transfer buckets, various specialised welding operations including some applications of the TIG process, and induction brazing of specialised assemblies. (U.K.)

  10. Components of the environment

    International Nuclear Information System (INIS)

    Klinda, J.; Lieskovska, Z.

    1998-01-01

    This report of the Ministry of the Environment of the Slovak Republic deals with the components of the environment. The results of monitoring of air (emission situation), ambient air quality, atmospheric precipitation, tropospheric ozone, water (surface water, groundwater resources, waste water and drinking water), geological factors (geothermal energy, fuel deposits, ore deposits, non-metallic ore deposits), soil (area statistics, soil contamination. soil reaction and active extractable aluminium, soil erosion), flora and fauna (national strategy of biodiversity protection) are presented

  11. Ionitriding of Weapon Components

    Science.gov (United States)

    1974-01-01

    and documented tho production sequences required for the case- hardening of AISI 4140 and Nitralloy 13514 steels. Determination of processina...depths were established experimentally for Nitralloy 135M and for AISI 4140 steels. These steels are commonly used for the manufacture of nitrlded...weapons components. A temperature of 050F, upper limit for lonitrlding, was selected for the Nitralloy 135M to keep treatment times short. Since AISI 4140

  12. Components of QCD

    International Nuclear Information System (INIS)

    Sivers, D.

    1979-10-01

    Some aspects of a simple strategy for testing the validity of QCD perturbation theory are examined. The importance of explicit evaluation of higher-order contributions is illustrated by considering Z 0 decays. The recent progress toward understanding exclusive processes in QCD is discussed and some simple examples are given of how to isolate and test the separate components of the perturbation expansion in a hypothetical series of jet experiments

  13. Fabrication and testing of main sodium pumps of Superphenix 1

    International Nuclear Information System (INIS)

    Noel, H.; Pasqualini, G.

    1985-01-01

    The complexity of the loads involved and the extremely fine analysis required necessitates extensive design calculations for the Superphenix 1 primary and secondary pumps and associated expansion tanks, aiming toward detailed design validation, after slight adjustments, mainly to the secondary pumps and expansion tanks. The component parts to be built were far larger than those for the previous pumps (Rapsodie, Phenix), with very low manufacturing tolerances, which led to precision machining and welding operations, together with numerous dimensional inspections and materials characterization tests to achieve the required quality standards

  14. Operation safety of complex industrial systems. Main concepts

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    2009-01-01

    Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

  15. From scenarios to components

    NARCIS (Netherlands)

    Fahland, D.

    2010-01-01

    Scenario-based modeling has evolved as an accepted paradigm for developing complex systems of various kinds. Its main purpose is to ensure that a system provides desired behavior to its users. A scenario is generally understood as a behavioral requirement, denoting a course of actions that shall

  16. Component flaw evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, K [Babcock and Wilcox Co., Lynchburg, VA (United States). Nuclear Power Div.

    1988-12-31

    This document deals with flaw evaluation during in-service inspection. These flaws can be divided into two groups: defects originating from the manufacturing fabrication stage or service-induced flaws. These are mainly caused by high cycle thermal fatigue and are influenced by the presence of stress corrosion cracking mechanisms such as nozzles or pump shaft. (TEC).

  17. Main building fire drill safely concluded

    CERN Document Server

    CERN Bulletin

    2015-01-01

    Last week, a simulated fire in the stairwell of the Main Building put CERN’s emergency response procedures to the test.   Firefighters descend the stairwell in the Main Building as the simulated fire rises.   At 2 p.m. on 22 September, alarms sounded around CERN’s Main Building as an evacuation exercise got underway. A simulated fire in the  stairwell, complete with very realistic smoke, led to the evacuation of one of the busiest places at CERN. The Main Building complex includes the Carlson Wagonlit travel agency, the post office, UBS, Uniqa, the Users Office, the Staff Association and the Novae restaurant as well as the Main Auditorium, the Council Chamber and the Charpak meeting room. It was impressive to see how quickly the smoke propagated in the staircase as well as into the corridors, and equally impressive to see how smoothly, quickly and efficiently the evacuation proceeded. The...

  18. Guide to the Main Ring DO overpass

    International Nuclear Information System (INIS)

    Turkot, F.

    1985-01-01

    The DO overpass is a modification of the beam orbit in Main Ring in order to better accommodate a Tevatron collider detector at DO. The orbit is moved up approx. 51 inches over most of the long straight section at DO, thus making the Main Ring the world's first non-planar proton synchrotron. A similar overpass, but with four times the displacement, is planned for the CDF detector at the BO straight section. The nominal separation between the beam orbit in the Main Ring and the orbit in the Tevatron is 25.5 inches. Early in the design study of a detector that would utilize the Tevatron is a anti pp collider, it was apparent that a larger separation at the detector was highly desirable. In 1981, Tom Collins proposed a specific lattice geometry in the Main Ring for achieving larger separation, called ''the screw beam''. His proposal has served as the basis for the design of both the BO and DO overpasses. The main purpose of this report is to describe in some detail the implementation of the DO overpass. Topics to be covered include: (a) geometry of the overpass orbit, (b) the new hardware in the tunnel, (c) the power supply system, (d) the control facility, (e) accelerator beam dynamics ramifications, and (f) commissioning experience. A secondary purpose is to provide a fairly complete ''bibliography'' to the sources of information on the overpass. 17 refs., 17 figs

  19. Technology development for special nuclear components

    International Nuclear Information System (INIS)

    Sanatkumar, A.

    1994-01-01

    One of the attractive features of Candu Pressurised Heavy Water Reactor design which influenced the decision to make it the foundation of our nuclear power programme, is that its main components (calandria, end shields, coolant channel components) are relatively simple - in comparison with reactor pressure vessel and associated components of Boiling Water Reactors or Pressurised Water Reactors - and considered to be within the scope of manufacture of developing countries. Over the last two decades, India has been very successful in technology development in many important and critical areas. We are now about to launch the construction of the first 500 MWe PHWR project at Tarapur. In this context, this paper focuses attention on some of the aspects relating to self-reliance in design, engineering and manufacture of these special components as currently perceived. (author). 3 refs

  20. Main Coast Winds - Final Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    Jason Huckaby; Harley Lee

    2006-03-15

    The Maine Coast Wind Project was developed to investigate the cost-effectiveness of small, distributed wind systems on coastal sites in Maine. The restructuring of Maine's electric grid to support net metering allowed for the installation of small wind installations across the state (up to 100kW). The study performed adds insight to the difficulties of developing cost-effective distributed systems in coastal environments. The technical hurdles encountered with the chosen wind turbine, combined with the lower than expected wind speeds, did not provide a cost-effective return to make a distributed wind program economically feasible. While the turbine was accepted within the community, the low availability has been a negative.

  1. The main trends of work on ageing and lifetime management of NPP

    International Nuclear Information System (INIS)

    Dragunov, Yu.

    1994-01-01

    The main trends of work on aging and lifetime management of nuclear power plants(NPP) in Russia are described including Russian research programs on NPP components lifetime assurance, technical assistance program for CIS, measures for life extension of reactor pressure vessels, steam generator collectors and components for advances reactor plants. Figs and tabs

  2. Transition crossing in the main injector

    International Nuclear Information System (INIS)

    Wei, J.

    1990-01-01

    This report summarizes the study of various longitudinal problems pertaining to the transition-energy crossing in the proposed Fermi Lab Main Injector. The theory indicates that the beam loss and bunch-area growth are mainly caused by the chromatic non-linear effect, which is enhanced by the space-charge force near transition. Computer simulation using the program TIBETAN shows that a ''γ T jump'' of about 1.5 unit within 1 ms is adequate to achieve a ''clean'' crossing in the currently proposed h=588 scenario. 19 refs., 4 figs

  3. Current Russian patriotism: matter, features, main directions

    Directory of Open Access Journals (Sweden)

    Lutovinov Vladimir Ilich

    2013-11-01

    Full Text Available The article considers understanding and the main point of patriotism as one of high cultural values. The main approaches that reveal different sides of this phenomenon, its role and importance in a history of Russia in the 21st century are inferred from the analysis of viewpoints of Russian thinkers and contemporary researchers. The patriotism formation problems in Russian society and their condition are defined, the need of patriotic level rise as one of the conditions for great Russia rebirth is substantiated.

  4. Bunch coalescing in the Fermilab Main Ring

    International Nuclear Information System (INIS)

    Wildman, D.; Martin, P.; Meisner, K.; Miller, H.W.

    1987-01-01

    A new RF system has been installed in the Fermilab Main Ring to coalesce up to 13 individual bunches of protons or antiprotons into a single high-intensity bunch. The coalescing process consists of adiabatically reducing the h=1113 Main Ring RF voltage from 1 MV to less than 1 kV, capturing the debunched beam in a linearized h=53 and h=106 bucket, rotating for a quarter of a synchrotron oscillation period, and then recapturing the beam in a single h=1113 bucket. The new system is described and the results of recent coalescing experiments are compared with computer-generated particle tracking simulations

  5. Anthropological Component of Descartes’ Ontology

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  6. ANTHROPOLOGICAL COMPONENT OF DESCARTES’ ONTOLOGY

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  7. Lake Erie Water Level Study. Main Report.

    Science.gov (United States)

    1981-07-01

    indirectly through excessive turbidity, current or depth would impact the higher life forms. Phytoplankton , periphyton and aquatic macrophyte comprise...System. The hydro-electric interest relates to the facilities at the St. Marys River, Welland Canal, Niagara River, St. Lawrence River at Cornwall... relates to three components: water quality, fish, and wildlife. The economic evaluations of regulation plans were also made to determine effects on

  8. Main principles of development stationary training facilities

    International Nuclear Information System (INIS)

    Tsiptsyura, R.D.

    1986-01-01

    The designation of stationary training facilities is shown and the main requirements for them are formulated. When considering the above-mentioned requirements, special attention was paid to obligatory correspondence between training experience and practical skill of an operator. It is shown, that the switchboard block is the major unit of the training facility, which should develop skills and habits of an operator

  9. Live insertion method used for main renewal

    International Nuclear Information System (INIS)

    Solkowitz, M.

    1992-01-01

    Baltimore Gas and Electric's pilot project using the live insertion method to replace a cast iron main provided excellent results. Its use on Eastern Avenue, a major state highway, was cost effective, provided gas service to customers during the work, required relatively short construction time and resulted in only minor traffic disruptions. Gas service transfers to the new main were done at customer convenience and resulted in outages of only a few hours per customer. This paper reports that the project involved inserting a 6-in. plastic line inside an existing 10-in. cast iron main. Miller Pipeline Corp., Indianapolis, supplier of the Insertec left-angle R right-angle live insertion method was contracted for the job. Miller technicians assisted BG and E forces by providing a load analysis of the main, a pushing machine and related supplies, foaming equipment and pipe cutting tools. Company forces were responsible for all preparatory work, including opening all excavations, installing bypasses, and fusing and testing the plastic pipe. Service transfers and renewals were also completed by company employees

  10. Maine Project against Bullying. Final Report.

    Science.gov (United States)

    Saufler, Chuck; Gagne, Cyndi

    Noting that bullying among primary school-age children has become recognized as an antecedent to more violent behavior in later grades, the 3-year Maine Project Against Bullying examined currently available research on bullying and evaluated books, curricula, media materials, and programs to identify resources and strategies which can be applied…

  11. Modern Portfolio Theory: Some Main Results

    OpenAIRE

    Müller, Heinz H.

    2017-01-01

    This article summarizes some main results in modern portfolio theory. First, the Markowitz approach is presented. Then the capital asset pricing model is derived and its empirical testability is discussed. Afterwards Neumann-Morgenstern utility theory is applied to the portfolio problem. Finally, it is shown how optimal risk allocation in an economy may lead to portfolio insurance

  12. Enhancing training in the main control room

    International Nuclear Information System (INIS)

    McGuigan, K.; O'Leary, K.; Canavan, K.

    2004-01-01

    In 2003 Pickering B Nuclear of Ontario Power Generation installed a Desktop Simulator (DTS) in the Main Control Room (MCR) for training purposes. This paper will outline why this training enhancement was undertaken and the approach taken to secure its use in an active MCR environment while minimizing distractions to plant operations. (author)

  13. Main successes, achievements. Paths of development

    Directory of Open Access Journals (Sweden)

    A. A. Kubanova

    2015-01-01

    Full Text Available The article provides the overview of incidence of sexually transmitted infections and skin disorders over time in Russian Federation in 2004-2014 with its main positive tendencies; results of reorganisation of bed capacity of dermatovenerologic medical organizations; dermatovenerologic bed rates.

  14. Main facts 1995; Faits marquants 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, monitoring and plants operations.

  15. Space transportation main engine reliability and safety

    Science.gov (United States)

    Monk, Jan C.

    1991-01-01

    Viewgraphs are used to illustrate the reliability engineering and aerospace safety of the Space Transportation Main Engine (STME). A technology developed is called Total Quality Management (TQM). The goal is to develop a robust design. Reducing process variability produces a product with improved reliability and safety. Some engine system design characteristics are identified which improves reliability.

  16. Water Hammer in Pumped Sewer Mains

    DEFF Research Database (Denmark)

    Larsen, Torben

    This publication is intended for engineers seeking an introduction to the problem of water hammer in pumped pressure mains. This is a subject of increasing interest because of the development of larger and more integrated sewer systems. Consideration of water hammer is essential for structural...

  17. D.E.R. 91 main facts

    International Nuclear Information System (INIS)

    Schmidt, N.

    1991-01-01

    This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: New applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, network analysis, information and informatic equipment

  18. VINKA, ten years on. Main scientific results

    International Nuclear Information System (INIS)

    1979-01-01

    The VINKA facility in the TRITON swimming-pool reactor at Fontenay-aux-Roses allows the irradiation of solids at low temperatures in order to study crystalline defects. After ten years of operation the main scientific results obtained in the fields of creep and growth (chapter I), point defects (chapter II), amorphisation (chapter III) and dechanneling of particles (chapter IV) are summarised [fr

  19. Results on Fermilab main injector dipole measurements

    International Nuclear Information System (INIS)

    Brown, B.C.; Baiod, R.; DiMarco, J.; Glass, H.D.; Harding, D.J.; Martin, P.S.; Mishra, S.; Mokhtarani, A.; Orris, D.F.; russell, O.A.; Tompkins, J.C.; Walbridge, D.G.C.

    1995-06-01

    Measurements of the Productions run of Fermilab Main Injector Dipole magnets is underway. Redundant strength measurements provide a set of data which one can fit to mechanical and magnetic properties of the assembly. Plots of the field contribution from the steel supplement the usual plots of transfer function (B/I) vs. I in providing insight into the measured results

  20. D.E.R. 92 - Main facts

    International Nuclear Information System (INIS)

    1992-01-01

    This report presents the main facts of the studies carried out by the Direction des Etudes et Recherches (DER) of Electricite de France: new applications of electricity, classical and nuclear thermal power plants, electrical equipment, environment protection, network analysis, information and informatic equipment

  1. Reinforced seal component

    International Nuclear Information System (INIS)

    Jeanson, G.M.; Odent, R.P.

    1980-01-01

    The invention concerns a seal component of the kind comprising a soft sheath and a flexible reinforcement housed throughout the entire length of the sheath. The invention enables O ring seals to be made capable of providing a radial seal, that is to say between two sides or flat collars of two cylindrical mechanical parts, or an axial seal, that is to say between two co-axial axisymmetrical areas. The seal so ensured is relative, but it remains adequately sufficient for many uses, for instance, to ensure the separation of two successive fixed blading compartments of axial compressors used in gas diffusion isotope concentration facilities [fr

  2. Electronic components and technology

    CERN Document Server

    Sangwine, Stephen

    2007-01-01

    Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook.Not only does this textbook introduce the properties, behavior, fabrication, and use

  3. Autonomous component carrier selection

    DEFF Research Database (Denmark)

    Garcia, Luis Guilherme Uzeda; Pedersen, Klaus; Mogensen, Preben

    2009-01-01

    management and efficient system operation. Due to the expected large number of user-deployed cells, centralized network planning becomes unpractical and new scalable alternatives must be sought. In this article, we propose a fully distributed and scalable solution to the interference management problem...... in local areas, basing our study case on LTE-Advanced. We present extensive network simulation results to demonstrate that a simple and robust interference management scheme, called autonomous component carrier selection allows each cell to select the most attractive frequency configuration; improving...... the experience of all users and not just the few best ones; while overall cell capacity is not compromised....

  4. Impedance of accelerator components

    International Nuclear Information System (INIS)

    Corlett, J.N.

    1996-05-01

    As demands for high luminosity and low emittance particle beams increase, an understanding of the electromagnetic interaction of these beams with their vacuum chamber environment becomes more important in order to maintain the quality of the beam. This interaction is described in terms of the wake field in time domain, and the beam impedance in frequency domain. These concepts are introduced, and related quantities such as the loss factor are presented. The broadband Q = 1 resonator impedance model is discussed. Perturbation and coaxial wire methods of measurement of real components are reviewed

  5. Interactions between photodegradation components

    Directory of Open Access Journals (Sweden)

    Abdollahi Yadollah

    2012-09-01

    Full Text Available Abstract Background The interactions of p-cresol photocatalytic degradation components were studied by response surface methodology. The study was designed by central composite design using the irradiation time, pH, the amount of photocatalyst and the p-cresol concentration as variables. The design was performed to obtain photodegradation % as actual responses. The actual responses were fitted with linear, two factor interactions, cubic and quadratic model to select an appropriate model. The selected model was validated by analysis of variance which provided evidences such as high F-value (845.09, very low P-value (2 = 0.999, adjusted R-squared (Radj2 = 0.998, predicted R-squared (Rpred2 = 0.994 and the adequate precision (95.94. Results From the validated model demonstrated that the component had interaction with irradiation time under 180 min of the time while the interaction with pH was above pH 9. Moreover, photocatalyst and p-cresol had interaction at minimal amount of photocatalyst (p-cresol. Conclusion These variables are interdependent and should be simultaneously considered during the photodegradation process, which is one of the advantages of the response surface methodology over the traditional laboratory method.

  6. Prognostics for Microgrid Components

    Science.gov (United States)

    Saxena, Abhinav

    2012-01-01

    Prognostics is the science of predicting future performance and potential failures based on targeted condition monitoring. Moving away from the traditional reliability centric view, prognostics aims at detecting and quantifying the time to impending failures. This advance warning provides the opportunity to take actions that can preserve uptime, reduce cost of damage, or extend the life of the component. The talk will focus on the concepts and basics of prognostics from the viewpoint of condition-based systems health management. Differences with other techniques used in systems health management and philosophies of prognostics used in other domains will be shown. Examples relevant to micro grid systems and subsystems will be used to illustrate various types of prediction scenarios and the resources it take to set up a desired prognostic system. Specifically, the implementation results for power storage and power semiconductor components will demonstrate specific solution approaches of prognostics. The role of constituent elements of prognostics, such as model, prediction algorithms, failure threshold, run-to-failure data, requirements and specifications, and post-prognostic reasoning will be explained. A discussion on performance evaluation and performance metrics will conclude the technical discussion followed by general comments on open research problems and challenges in prognostics.

  7. [Chemical components of Vetiveria zizanioides volatiles].

    Science.gov (United States)

    Huang, Jinghua; Li, Huashou; Yang, Jun; Chen, Yufen; Liu, Yinghu; Li, Ning; Nie, Chengrong

    2004-01-01

    The chemical components of the volatiles from Vetiveria zizanioides were analyzed by SPME and GC-MS. In the roots, the main component was valencene (30.36%), while in the shoots and leaves, they were 9-octadecenamide (33.50%), 2,6,10,15,19,23-hexamethyl-2,6,10,14,18,22-tetracosahexaene (27.46%), and 1,2-benzendicarboxylic acid, diisooctyl ester(18.29%). The results showed that there were many terpenoids in the volatils. In shoot volatiles, there existed 3 monoterpenes, 2 sequiterpenes and 1 triterpene. Most of the volatiles in roots were sesquiterpenes.

  8. RELATIONSHIPS AMONG COMPONENTS OF ENGAGEMENT RISK

    Directory of Open Access Journals (Sweden)

    EVREN DILEK SENGUR

    2012-01-01

    Full Text Available Accounting scandals exploded at the beginning of 2000s and the collapse of Arthur Andersen highlighted the importance of implementing engagement risk management strategies in audit firms. Engagement risk refers the overall risk associated with an audit engagement and it consists of three components: client's business risk, auditor's business risk, and audit risk. The main purpose of this study is to describe each components of engagement risk and explain relations among them. Additionally, the paper points out the importance of engagement risk management throughout the audit and demonstrates engagement risk management strategies at client acceptance/ continuance, planning and completion of audit.

  9. Condition monitoring of main coolant pumps, Dhruva

    International Nuclear Information System (INIS)

    Prasad, V.; Satheesh, C.; Acharya, V.N.; Tikku, A.C.; Mishra, S.K.

    2002-01-01

    Full text: Dhruva is a 100 MW research reactor with natural uranium fuel, heavy water as moderator and primary coolant. Three Centrifugal pumps circulate the primary coolant across the core and the heat exchangers. Each pump is coupled to a flywheel (FW) assembly in order to meet operational safety requirements. All the 3 main coolant pump (MCP) sets are required to operate during operation of the reactor. The pump-sets are in operation since the year 1984 and have logged more than 1,00,000 hrs. Frequent breakdowns of its FW bearings were experienced during initial years of operation. Condition monitoring of these pumps, largely on vibration based parameters, was initiated on regular basis. Break-downs of main coolant pumps reduced considerably due to the fair accurate predictions of incipient break-downs and timely maintenance efforts. An effort is made in this paper to share the experience

  10. Alarm system for ABWR main control panels

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Yuji; Saito, Koji [Toshiba Corp., Yokohoma (Japan)

    1997-09-01

    TOSHIBA has developed integrated digital control and instrumentation system for ABWR, which is the third-generation man machine interface system for main control room that we call A-PODIA (Advanced PODIA). A-Podia has been introduced the first actual ABWR plant in Japan. in A-PODIA, TOSHIBA has realized improvement of alarm system that all operator crews in the control room can recognize plant anomalies easily. The alarm system can recognize essential alarms for plant safety easily and understand annunciators with each integrated annunciators and their prioritized color easily by classifying alarms into plant-level essential annunciators, system-level integrated annunciators and equipment level individual annunciators with hierarchical structure. This paper describes conventional alarm system and the design philosophy, alarm system design and operation of ``Alarm System for ABWR Main Control Panels``. (author). 5 refs, 8 figs, 1 tab.

  11. Organization structure. Main activities of the Division

    International Nuclear Information System (INIS)

    2008-01-01

    In this chapter the organization structure as well as main activities of the Division for radiation safety, NPP decommissioning and radioactive waste management are presented. This Division of the VUJE, a.s. consists of the following sections and departments: Section for economic and technical services; Section for radiation protection of employees; Department for management of emergency situations and risk assessment; Department for implementation of nuclear power facilities decommissioning and RAW management; Department for personnel and environmental dosimetry; Department for preparation of NPP decommissioning; Department for RAW treatment technologies; Department for chemical regimes and physico-chemical analyses; Department for management of nuclear power facilities decommissioning and RAW management. Main activities of this Division are presented.

  12. Challenges of the ILC Main Linac

    International Nuclear Information System (INIS)

    Ross, Marc

    2007-01-01

    With the completion of the ILC Reference Design Report (RDR), we begin the next phase of the project - development of the Engineering Design. Our strategy and priorities come from the identification, contained in the RDR, of scientific and engineering challenges of the ILC. First among these is the cost of the main linac which, including the associated earthworks and cooling/power systems, amounts to 60% of the ILC total cost. Next is the challenge to reach the highest practical gradient since this R and D has the largest cost leverage of any of the ongoing programs. Finally, we have to understand the beam dynamics and beam tuning processes in the main linac, as we will not have the opportunity to do full (or even large) scale tests of these before the linac is constructed.

  13. Chromaticity compensation scheme for the Main Injector

    International Nuclear Information System (INIS)

    Bogacz, S.A.

    1993-05-01

    The current Main Injector lattice is studied in the context of full chromaticity compensation in the presence of the eddy current, saturation and the end-pack sextupole fields generated by the dipole magnets. Two families of correcting sextupole magnets are placed to compensate these fields and to adjust the chromaticity (in both planes) to some desired value. Variation of the dipole induced sextupole fields with the B-field (changing along a ramp) are modeled according to recent experimental measurements of the Main Injector dipole magnet Analysis of the required sextupole strengths is carried out along two realistic momentum ramps. The results of our calculation give quantitative insight into the requisite performance of the sextupole magnets

  14. Installation Strategy for the LHC Main Dipoles

    CERN Multimedia

    Fartoukh, Stephane David

    2004-01-01

    All positions in the LHC machine are not equivalent in terms of beam requirements on the geometry and the field quality of the main dipoles. In the presence of slightly or strongly out-of tolerance magnets, a well-defined installation strategy will therefore contribute to preserve or even optimize the performance of the machine. Based on the present status of the production, we have anticipated a list of potential issues (geometry, transfer function, field direction and random b3) which, combined by order of priority, have been taken into account to define a simple but efficient installation algorithm for the LHC main dipoles. Its output is a prescription for installing the available dipoles in sequence while reducing to an absolute minimum the number of holes required by geometry or FQ issues.

  15. The LHC Main Quadrupoles during Series Fabrication

    CERN Document Server

    Tortschanoff, Theodor; Durante, M; Hagen, P; Klein, U; Krischel, D; Payn, A; Rossi, L; Schellong, B; Schmidt, P; Simon, F; Schirm, K-M; Todesco, E

    2006-01-01

    By the end of August 2005 about 320 of the 400 main LHC quadrupole magnets have been fabricated and about 220 of them assembled into their cold masses, together with corrector magnets. About 130 of them have been cold tested in their cryostats and most of the quadrupoles exceeded their nominal excitation, i.e. 12,000 A, after no more than two training quenches. During this series fabrication, the quality of the magnets and cold masses was thoroughly monitored by means of warm magnetic field measurements, of strict geometrical checking, and of various electrical verifications. A number of modifications were introduced in order to improve the magnet fabrication, mainly correction of the coil geometry for achieving the specified field quality and measures for avoiding coil insulation problems. Further changes concern the electrical connectivity and insulation of instrumentation, and of the corrector magnets inside the cold masses. The contact resistances for the bus-bar connections to the quench protection diode...

  16. The double main sequence of Omega Centauri

    Science.gov (United States)

    Bedin, L. R.; Piotto, G.; Anderson, J.; King, I. R.; Cassisi, S.; Momany, Y.

    Recent, high precision photometry of Omega Centauri, the biggest Galactic globular cluster, has been obtained with Hubble Space Telescope (HST). The color magnitude diagram reveals an unexpected bifurcation of colors in the main sequence (MS). The newly found double MS, the multiple turnoffs and subgiant branches, and other sequences discovered in the past along the red giant branch of this cluster add up to a fascinating but frustrating puzzle. Among the possible explanations for the blue main sequence an anomalous overabundance of helium is suggested. The hypothesis will be tested with a set of FLAMES@VLT data we have recently obtained (ESO DDT program), and with forthcoming ACS@HST images. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by AURA, Inc., under NASA contract NAS 5-26555.

  17. Alarm system for ABWR main control panels

    International Nuclear Information System (INIS)

    Kobayashi, Yuji; Saito, Koji

    1997-01-01

    TOSHIBA has developed integrated digital control and instrumentation system for ABWR, which is the third-generation man machine interface system for main control room that we call A-PODIA (Advanced PODIA). A-Podia has been introduced the first actual ABWR plant in Japan. in A-PODIA, TOSHIBA has realized improvement of alarm system that all operator crews in the control room can recognize plant anomalies easily. The alarm system can recognize essential alarms for plant safety easily and understand annunciators with each integrated annunciators and their prioritized color easily by classifying alarms into plant-level essential annunciators, system-level integrated annunciators and equipment level individual annunciators with hierarchical structure. This paper describes conventional alarm system and the design philosophy, alarm system design and operation of ''Alarm System for ABWR Main Control Panels''. (author). 5 refs, 8 figs, 1 tab

  18. INNOVATION DIFFUSION THEORY MAIN DEVELOPMENT STAGES

    Directory of Open Access Journals (Sweden)

    S. V. Lisafiev

    2011-01-01

    Full Text Available Abstract: Main innovation diffusion development theory stages are: Rogers model of moving new products to the market including characteristics of its segments; mathematic substantiation of this model by Bass; Moor model taking into account gaps between adjacent market segments; Goldenberg model making it possible to predict sales drops at new product life cycle initial stages. It is reasonable to use this theory while moving innovative products to the market.

  19. The Main Properties of q-Functions

    OpenAIRE

    Nina O. Virchenko; Olena V. Ovcharenko

    2017-01-01

    Background.  The new generalization of the function of complex variable (q-function) is considered, its main properties are investigated. Such distributions have a special place among the special functions due to their widespread use in many areas of applied mathematics. Objective. The aim of the paper is to study the new generalization of the function of complex variable for application in applied sciences. Methods. To obtain scientific results the general methods of the mathematical a...

  20. Radiation shielding of the main injector

    International Nuclear Information System (INIS)

    Bhat, C.M.; Martin, P.S.

    1995-05-01

    The radiation shielding in the Fermilab Main Injector (FMI) complex has been carried out by adopting a number of prescribed stringent guidelines established by a previous safety analysis. Determination of the required amount of radiation shielding at various locations of the FMI has been done using Monte Carlo computations. A three dimensional ray tracing code as well as a code based upon empirical observations have been employed in certain cases

  1. Post-main-sequence planetary system evolution

    Science.gov (United States)

    Veras, Dimitri

    2016-01-01

    The fates of planetary systems provide unassailable insights into their formation and represent rich cross-disciplinary dynamical laboratories. Mounting observations of post-main-sequence planetary systems necessitate a complementary level of theoretical scrutiny. Here, I review the diverse dynamical processes which affect planets, asteroids, comets and pebbles as their parent stars evolve into giant branch, white dwarf and neutron stars. This reference provides a foundation for the interpretation and modelling of currently known systems and upcoming discoveries. PMID:26998326

  2. The BTeV main spectrometer

    International Nuclear Information System (INIS)

    Sheldon, P.D.

    2001-01-01

    BTeV is a second generation B-factory experiment that will use a double-arm, forward spectrometer in the C0 experimental hall at the Fermilab Tevatron. I will describe the motivation and design of the 'main spectrometer', consisting of a ring-imaging Cherenkov system for charged particle identification, an electromagnetic calorimeter of lead-tungstate crystals, a proportional tube muon system with magnetized filtering steel, and a straw-tube and silicon strip charged particle tracking system

  3. How components are qualified

    International Nuclear Information System (INIS)

    Burstein, N.M.

    1980-01-01

    This work presents a basic description and rationale behind the requirements, reasons and implementation of the concept of qualification for Safety Related Class 1E electric equipment for use in Nuclear Power Generating Stations. The discussion centers around the requirements as set forth in the Code of Federal Regulations, IEEE Standard 323, and the guidance provided by Regulatory Guide 1.89. The main elements of the study describe what is meant by qualification, what is required for qualification and the implementation process. 11 refs

  4. Automatic ECG analysis using principal component analysis and wavelet transformation

    OpenAIRE

    Khawaja, Antoun

    2007-01-01

    The main objective of this book is to analyse and detect small changes in ECG waves and complexes that indicate cardiac diseases and disorders. Detecting predisposition to Torsade de Points (TDP) by analysing the beat-to-beat variability in T wave morphology is the main core of this work. The second main topic is detecting small changes in QRS complex and predicting future QRS complexes of patients. Moreover, the last main topic is clustering similar ECG components in different groups.

  5. Main-sequence photometry in NGC 2808

    International Nuclear Information System (INIS)

    Buonanno, R.; Corsi, C.E.; Fusi Pecci, F.; Harris, W.E.

    1984-01-01

    We have obtained a color-magnitude diagram for the southern globular cluster NGC 2808, to V/sub lim/approx. =21 (about 2 mag below the main-sequence turnoff). The internal photographic errors are sigma/sub V/approx. =0.02, sigma/sub B/-Vapprox. =0.03, small enough to permit a precise definition of the turnoff region and an estimate of the ''cosmic scatter'' along the main sequence. Fitting of the CMD to VandenBerg's [Astrophys. J. Suppl. 51, 29 (1983)] isochrones shows that an excellent match to the observations is achieved for model parameters of Yapprox. =0.2, Zapprox. =0.003 ([Fe/H]approx. =-0.8), and an age of (16 +- 2) billion years. All these characteristics are within the expected range from other observational constraints; no new clues from the main-sequence data alone have arisen to help explain the presence of the anomalous blue horizontal-branch stars

  6. Isolated systems with wind power. Main report

    Energy Technology Data Exchange (ETDEWEB)

    Lundsager, P.; Bindner, H.; Clausen, N.E.; Frandsen, S.; Hansen, L.H.; Hansen, J.C.

    2001-06-01

    The overall objective of this research project is to study the development of methods and guidelines rather than 'universal solutions' for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present a more unified and generally applicable approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, field measurements in Egypt, development of an inventory of small isolated systems, overview of end-user demands, analysis of findings and development of proposed guidelines. The project is reported in one main report and four topical reports, all of them issued as Risoe reports. This is the Main Report Risoe-R-1256, summing up the activities and findings of the project and outlining an Implementation Strategy for Isolated Systems with Wind Power, applicable for international organisations such as donor agencies and development banks. (au)

  7. Food Components and Supplements

    DEFF Research Database (Denmark)

    Parlesak, Alexandr

    2012-01-01

    The major part of food consists of chemical compounds that can be used for energy production, biological synthesis, or maintenance of metabolic processes by the host. These components are defined as nutrients, and can be categorized into macronutrients (proteins, carbohydrates, triglycerides......, and alcohol), minerals, and micronutrients. The latter category comprises 13 vitamins and a hand full of trace elements. Many micronutrients are used as food supplements and are ingested at doses exceeding the amounts that can be consumed along with food by a factor of 10–100. Both macro- and micronutrients...... can interact with enzyme systems related to xenobiotic metabolism either by regulation of their expression or direct interference with their enzymatic activity. During food consumption, we consume a wide range of xenobiotics along with the consumable food, either as an original part of the food (e...

  8. Sprayed skin turbine component

    Science.gov (United States)

    Allen, David B

    2013-06-04

    Fabricating a turbine component (50) by casting a core structure (30), forming an array of pits (24) in an outer surface (32) of the core structure, depositing a transient liquid phase (TLP) material (40) on the outer surface of the core structure, the TLP containing a melting-point depressant, depositing a skin (42) on the outer surface of the core structure over the TLP material, and heating the assembly, thus forming both a diffusion bond and a mechanical interlock between the skin and the core structure. The heating diffuses the melting-point depressant away from the interface. Subsurface cooling channels (35) may be formed by forming grooves (34) in the outer surface of the core structure, filling the grooves with a fugitive filler (36), depositing and bonding the skin (42), then removing the fugitive material.

  9. Food Components and Supplements

    DEFF Research Database (Denmark)

    Parlesak, Alexandr

    2012-01-01

    acting as carcinogens) to health-protective effects (e.g., flavonoids ameliorating detrimental effects of mitochondrial oxidative stress). In particular, secondary plant metabolites along with vitamins, specific types of macronutrients and live bacteria (probiotics) as well as substances promoting.......g., secondary plant metabolites such as flavonoids), or as contaminants that enter the food chain at different stages or during the food production process. For these components, a wide spectrum of biological effects was observed that ranges from health-threatening impacts (e.g., polycyclic aromatic amines....... The supplements and contaminants can compete directly with drug oxidation, induce or suppress the expression of xenobiotic-metabolizing enzymes, change the bioavailability of drugs, and, in the case of live bacteria, bring in their own xenobiotic metabolism, including cytochrome P450 (CYP) activity. In numerous...

  10. Component failure data handbook

    International Nuclear Information System (INIS)

    Gentillon, C.D.

    1991-04-01

    This report presents generic component failure rates that are used in reliability and risk studies of commercial nuclear power plants. The rates are computed using plant-specific data from published probabilistic risk assessments supplemented by selected other sources. Each data source is described. For rates with four or more separate estimates among the sources, plots show the data that are combined. The method for combining data from different sources is presented. The resulting aggregated rates are listed with upper bounds that reflect the variability observed in each rate across the nuclear power plant industry. Thus, the rates are generic. Both per hour and per demand rates are included. They may be used for screening in risk assessments or for forming distributions to be updated with plant-specific data

  11. High thermal load component

    International Nuclear Information System (INIS)

    Fuse, Toshiaki; Tachikawa, Nobuo.

    1996-01-01

    A cooling tube made of a pure copper is connected to the inner portion of an armour (heat resistant member) made of an anisotropic carbon/carbon composite (CFC) material. The CFC material has a high heat conductivity in longitudinal direction of fibers and has low conductivity in perpendicular thereto. Fibers extending in the armour from a heat receiving surface just above the cooling tube are directly connected to the cooling tube. A portion of the fibers extending from a heat receiving surface other than portions not just above the cooling tube is directly bonded to the cooling tube. Remaining fibers are disposed so as to surround the cooling tube. The armour and the cooling tube are soldered using an active metal flux. With such procedures, high thermal load components for use in a thermonuclear reactor are formed, which are excellent in a heat removing characteristic and hardly causes defects such as crackings and peeling. (I.N.)

  12. Impedance and component heating

    CERN Document Server

    Métral, E; Mounet, N; Pieloni, T; Salvant, B

    2015-01-01

    The impedance is a complex function of frequency, which represents, for the plane under consideration (longitudinal, horizontal or vertical), the force integrated over the length of an element, from a “source” to a “test” wave, normalized by their charges. In general, the impedance in a given plane is a nonlinear function of the test and source transverse coordinates, but it is most of the time sufficient to consider only the first few linear terms. Impedances can influence the motion of trailing particles, in the longitudinal and in one or both transverse directions, leading to energy loss, beam instabilities, or producing undesirable secondary effects such as excessive heating of sensitive components at or near the chamber wall, called beam-induced RF heating. The LHC performance limitations linked to impedances encountered during the 2010-2012 run are reviewed and the currently expected situation during the HL-LHC era is discussed.

  13. Reliability Analysis of Fatigue Failure of Cast Components for Wind Turbines

    OpenAIRE

    Hesam Mirzaei Rafsanjani; John Dalsgaard Sørensen

    2015-01-01

    Fatigue failure is one of the main failure modes for wind turbine drivetrain components made of cast iron. The wind turbine drivetrain consists of a variety of heavily loaded components, like the main shaft, the main bearings, the gearbox and the generator. The failure of each component will lead to substantial economic losses such as cost of lost energy production and cost of repairs. During the design lifetime, the drivetrain components are exposed to variable loads from winds and waves an...

  14. Security Components of Globalization

    Directory of Open Access Journals (Sweden)

    Florin Iftode

    2015-05-01

    Full Text Available The objective of this paper is our intention to present what are the main connections between globalization and international security. In terms of global security we can perceive the globalization as a process by which global state is represented by the UN, with a single world system, represented by major security organizations and with global effects. We will present from the beginning the main theoretical aspects that define the phenomenon of globalization, and then our contribution in assessing the implications of this phenomenon on the regional and global security. The results of our research are materialized in the last part of the paper. They emphasize the personal assessments on how the phenomenon of globalization has direct effect on global security. When talking about government, we think of norms, rules and decisionmaking procedures in the management of international life. The value that we add to the new scientific interpretation of the definition of globalization is represented, primarily, by the valuable bibliographic used resources and the original approach on the concept that refers to the links between globalization and security. This article may be, at any time, a starting point in an interesting research direction in the field of global security.

  15. In-service inspection robot for PFBR main vessel- concept

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, S; Ramakumar, M S [Bhabha Atomic Research Centre, Mumbai (India). Div. of Remote Handling and Robotics

    1994-12-31

    In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs.

  16. In-service inspection robot for PFBR main vessel- concept

    International Nuclear Information System (INIS)

    Rajendran, S.; Ramakumar, M.S.

    1994-01-01

    In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs

  17. Cross-Section Measurements of the Kr86(γ,n) Reaction to Probe the s-Process Branching at Kr85

    Science.gov (United States)

    Raut, R.; Tonchev, A. P.; Rusev, G.; Tornow, W.; Iliadis, C.; Lugaro, M.; Buntain, J.; Goriely, S.; Kelley, J. H.; Schwengner, R.; Banu, A.; Tsoneva, N.

    2013-09-01

    We have carried out photodisintegration cross-section measurements on Kr86 using monoenergetic photon beams ranging from the neutron separation energy, Sn=9.86MeV, to 13 MeV. We combine our experimental Kr86(γ,n)Kr85 cross section with results from our recent Kr86(γ,γ') measurement below the neutron separation energy to obtain the complete nuclear dipole response of Kr86. The new experimental information is used to predict the neutron capture cross section of Kr85, an important branching point nucleus on the abundance flow path during s-process nucleosynthesis. Our new and more precise Kr85(n,γ)Kr86 cross section allows us to produce more precise predictions of the Kr86 abundance from s-process models. In particular, we find that the models of the s process in asymptotic giant branch stars of mass <1.5M⊙, where the C13 neutron source burns convectively rather than radiatively, represent a possible solution for the highest Kr86∶Kr82 ratios observed in meteoritic stardust SiC grains.

  18. The s-Process Nucleosynthesis in Extremely Metal-Poor Stars as the Generating Mechanism of Carbon Enhanced Metal-Poor Stars

    Science.gov (United States)

    Suda, Takuma; Yamada, Shimako; Fujimoto, Masayuki Y.

    The origin of carbon-enhanced metal-poor (CEMP) stars plays a key role in characterising the formation and evolution of the first stars and the Galaxy since the extremely-metal-poor (EMP) stars with [Fe/H] ≤ -2.5 share the common features of carbon enhancement in their surface chemical compositions. The origin of these stars is not yet established due to the controversy of the origin of CEMP stars without the enhancement of s-process element abundances, i.e., so called CEMP-no stars. In this paper, we elaborate the s-process nucleosynthesis in the EMP AGB stars and explore the origin of CEMP stars. We find that the efficiency of the s-process is controlled by O rather than Fe at [Fe/H] ≲ -2. We demonstrate that the relative abundances of Sr, Ba, Pb to C are explained in terms of the wind accretion from AGB stars in binary systems.

  19. Cross-section measurements of the 86Kr(γ,n) reaction to probe the s-process branching at 85Kr.

    Science.gov (United States)

    Raut, R; Tonchev, A P; Rusev, G; Tornow, W; Iliadis, C; Lugaro, M; Buntain, J; Goriely, S; Kelley, J H; Schwengner, R; Banu, A; Tsoneva, N

    2013-09-13

    We have carried out photodisintegration cross-section measurements on 86Kr using monoenergetic photon beams ranging from the neutron separation energy, S(n) = 9.86  MeV, to 13 MeV. We combine our experimental 86Kr(γ,n)85Kr cross section with results from our recent 86Kr(γ,γ') measurement below the neutron separation energy to obtain the complete nuclear dipole response of 86Kr. The new experimental information is used to predict the neutron capture cross section of 85Kr, an important branching point nucleus on the abundance flow path during s-process nucleosynthesis. Our new and more precise 85Kr(n,γ)86Kr cross section allows us to produce more precise predictions of the 86Kr abundance from s-process models. In particular, we find that the models of the s process in asymptotic giant branch stars of mass <1.5M⊙, where the 13C neutron source burns convectively rather than radiatively, represent a possible solution for the highest 86Kr:82Kr ratios observed in meteoritic stardust SiC grains.

  20. Rates of the main thermonuclear reactions

    International Nuclear Information System (INIS)

    Abramovich, S.N.; Guzhovskii, B.Ya.; Dunaeva, S.A.; Fomushkin, E.F.

    1992-01-01

    The data on the cross sections of main thermonuclear reactions have been estimated with an account of the latest experimental results in a form of S-factor spline presentation. Based on this estimation, the reates of these reactions in 0.0001-1 MeV temperature range in the supposition of Maxwell distribution of relative velocities have been computed. The Maxwell-Boltzmann averaged -factors were calculated according to the table values of the reaction rates. Then the -factors were approximated with the 3 order spline-function. The necessity of the account of electron shielding and intramolecular movement at low temperatures is discussed (orig.)

  1. Musculoskeletal disorders in main battle tank personnel

    DEFF Research Database (Denmark)

    Nissen, Lars Ravnborg; Guldager, Bernadette; Gyntelberg, Finn

    2009-01-01

    PURPOSE: To compare the prevalence of musculoskeletal disorders of personnel in the main battle tank (MBT) units in the Danish army with those of personnel in other types of army units, and to investigate associations between job function in the tank, military rank, and musculoskeletal problems......, and ankle. RESULTS AND CONCLUSIONS: There were only 4 women in the MBT group; as a consequence, female personnel were excluded from the study. The participation rate was 58.0% (n = 184) in the MBT group and 56.3% (n = 333) in the reference group. The pattern of musculoskeletal disorders among personnel...

  2. Main problems of modern radiation hygiene

    International Nuclear Information System (INIS)

    Il'in, L.A.; Buldakov, L.A.; Knizhnikov, V.A.

    1982-01-01

    The results of investigations carried out in 1980-81 in the field of radiation hygiene as well as plans for 1981-85 are considered. Three main groups of problems which the radiation hygiene is facing at the present time are discussed. The determination of levels and study of regularities of ionizing radiation dose formation in the population and personnel working with ionizing radiation sources in one of the promissing directions of the investigations. Delayed irradiation aftereffects andcontaminant action ofirradiation and chemical substances are no less important. The third important problem lies in the development of protective measures and arrangements on improving state sanitary inspection in the field of radiation hygiene

  3. Some peat deposits in Penobscot County, Maine

    Science.gov (United States)

    Cameron, Cornelia Clermont; Anderson, Walter A.

    1979-01-01

    Twenty of the peat deposits in Penobscot County, Maine contain an estimated 29,282,000 short tons air-dried peat. The peat is chiefly sphagnum moss and reed-sedge of high quality according to ASTM standards for agricultural and horticultural use. Analyses show that this same volume has high fuel value, low sulfur and high hydrogen contents compared with lignite and sub-bituminous coal, which may indicate that it also has potential for fuel use. On the basis of the metallic trace element content, one area within the region containing the 20 deposits has been delineated for further bedrock studies.

  4. Main-chain supramolecular block copolymers.

    Science.gov (United States)

    Yang, Si Kyung; Ambade, Ashootosh V; Weck, Marcus

    2011-01-01

    Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

  5. Additively Manufactured Main Fuel Valve Housing

    Science.gov (United States)

    Eddleman, David; Richard, Jim

    2015-01-01

    Selective Laser Melting (SLM) was utilized to fabricate a liquid hydrogen valve housing typical of those found in rocket engines and main propulsion systems. The SLM process allowed for a valve geometry that would be difficult, if not impossible to fabricate by traditional means. Several valve bodies were built by different SLM suppliers and assembled with valve internals. The assemblies were then tested with liquid nitrogen and operated as desired. One unit was also burst tested and sectioned for materials analysis. The design, test results, and planned testing are presented herein.

  6. Water Hammer in Pumped Sewer Mains

    DEFF Research Database (Denmark)

    Larsen, Torben

    of transients in pumped pipeline systems. This present publication can be understood as the second and revised edition of the pamphlet ”Transients in pumped sewer mains” (2006) which was published as a technical report by The EVA committee under The Danish Water Pollution Committee (The Danish Society......This publication is intended for students and engineers seeking an introduction to the problem of water transients in pumped sewer and water mains. This is a subject of increasing interest because of the development of larger and more integrated systems. Consideration of transients is essential...

  7. Space Shuttle Main Engine Public Test Firing

    Science.gov (United States)

    2000-01-01

    A new NASA Space Shuttle Main Engine (SSME) roars to the approval of more than 2,000 people who came to John C. Stennis Space Center in Hancock County, Miss., on July 25 for a flight-certification test of the SSME Block II configuration. The engine, a new and significantly upgraded shuttle engine, was delivered to NASA's Kennedy Space Center in Florida for use on future shuttle missions. Spectators were able to experience the 'shake, rattle and roar' of the engine, which ran for 520 seconds - the length of time it takes a shuttle to reach orbit.

  8. Main challenges in demulsifier research and application

    Science.gov (United States)

    Zhang, Fusheng; Liu, Guoliang; Ma, Junhan; Ouyang, Jian; Yi, Xiaoling; Su, Huimin

    2017-01-01

    Main challenges in demulsifier research, such as demulsification of ASP flooding produced liquid, demulsification of heavy oil produced liquid, low temperature demulsification and fast demulsification, are summarized. Some importance technology routes to solve the challenges are proposed according to demulsification mechanisms and emulsion characteristics. The proposed routes include increasing aromaticity, molecular weight and branch degree of demulsifiers, and introducing double-function groups to demulsifiers for W/O and O/W emulsions, or groups with alkyl matching with alkyl carbon number of the crude oil into demulsifier molecule. The demulsification mechanisms of the above-mentioned research routes are described in detail.

  9. Isolated systems with wind power. Main report

    DEFF Research Database (Denmark)

    Lundsager, P.; Bindner, Henrik W.; Clausen, Niels-Erik

    2001-01-01

    The overall objective of this research project is to study the development of methods and guidelines rather than "universal solutions" for the use of wind energy in isolated communities. The main specific objective of the project is to develop and present amore unified and generally applicable...... approach for assessing the technical and economical feasibility of isolated power supply systems with wind energy. As a part of the project the following tasks were carried out: Review of literature, fieldmeasurements in Egypt, development of an inventory of small isolated systems, overview of end...... for Isolated Systems with Wind Power, applicable for international organisations such as donoragencies and development banks....

  10. Component-Based Software Engineering and Runtime Type Definition

    OpenAIRE

    A. R. Shakurov

    2011-01-01

    The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

  11. Ferbane Nursing Home, Main Street, Ferbane, Offaly.

    LENUS (Irish Health Repository)

    Shanahan, Fergus

    2012-02-03

    Mechanisms underlying the conditioning influence of the intestinal flora on mucosal homeostasis, including development and function of immune responses, are attracting increasing scientific scrutiny. The intestinal flora is a positive asset to host defense, but some of its components may, in genetically susceptible hosts, become a risk factor for development of inflammatory bowel disease (IBD). It follows that strategies to enhance assets or offset microbial liabilities represent a therapeutic option; therein lies the rationale for manipulation of the flora in IBD. In addition, the diversity of regulatory signalling among the flora and host epithelum, lymphoid tissue, and neuromuscular apparatus is an untapped reservoir from which novel therapeutics may be mined. Moreover, the capacity to engineer food-grade or commensal bacteria to deliver therapeutic molecules to the intestinal mucosa promises to extend the scope of microbial manipulation for the benefit of mankind.

  12. Fabrication of Micro Components by Electrochemical Deposition

    DEFF Research Database (Denmark)

    Tang, Peter Torben

    The main issue of this thesis is the combination of electrochemical deposition of metals and micro machining. Processes for electroplating and electroless plating of nickel and nickel alloys have been developed and optimised for compatibility with microelectronics and silicon based micromechanics...... of electrochemical machining and traditional machining is compared to micro machining techniques as performed in the field of microelectronics. Various practical solutions and equipment for electrochemical deposition of micro components are demonstrated, as well as the use and experience obtained utilising...

  13. Initial Ada components evaluation

    Science.gov (United States)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  14. Radiation damage in components

    International Nuclear Information System (INIS)

    Takano, Tomehachi

    1977-01-01

    The performance change of typical capacitors and resistors in electronic components by Co-60 γ-irradiation from the 1320 Ci source was examined in the range of 10 5 to 10 8 R. Specifically, the characteristic change during irradiation and the recovery after irradiation were continuously observed. The capacity change is +2.4% at maximum in ceramic and metallized paper capacitors, and -2.4% at maximum in mylar and paper capacitors. It is also +-0.4% at maximum in mica and polystyrene capacitors. Some of these capacitors showed the recovery of the capacity change, but the others did not. Dielectric loss varied by 15% at larger dose in some capacitors, and the recovery was not observed. While, the insulation resistance of the resistors of 10 15 Ω or more lowered to 10 13 Ω or less after 10 to 30 sec. irradiation, but recovered soon nearly to the initial values after irradiation was interrupted. The resistance change of carbon film resistors is about 0.2 to 2%, and recovered to the initial values in 100 hours after irradiation. The resistance change of composition resistors is large over the range of -13 to +35%, besides, no sign of recovery was seen. In carbon film resistors, the surface insulated type indicated far better results which are assumed to be caused by the selection of element materials and the forming of coating materials. (Wakatsuki, Y.)

  15. Forensic entomology and main challenges in Brazil.

    Science.gov (United States)

    Gomes, Leonardo; Von Zuben, Cláudio J

    2006-01-01

    Apart from an early case report from China (13th century), the first observations on insects and other arthropods as forensic indicators were documented in Germany and France during mass exhumations in the 1880s by Reinhard, who is considered a co-founder of the discipline. After the French publication of Mégnin's popular book on the applied aspects of forensic entomology, the concept quickly spread to Canada and United States. At that time, researchers recognized that the lack of systematic observations of insects of forensic importance jeopardized their use as indicators of postmortem interval. General advances in insect taxonomy and ecology helped to fill this gap over the following decades. After World Wars, few forensic entomology cases were reported in the scientific literature. From 1960s to the 1980s, Leclercq and Nuorteva were primarily responsible for maintaining the method in Central Europe, reporting isolated cases. Since then, basic research in the USA, Russia and Canada opened the way to the routine use of Entomology in forensic investigations. Identifications of insects associated with human cadavers are relatively few in the literature of the Neotropical region and have received little attention in Brazil. This article brings an overview of historic developments in this field, the recent studies and the main problems and challenges in South America and mainly in Brazil.

  16. Main Issues in Big Data Security

    Directory of Open Access Journals (Sweden)

    Julio Moreno

    2016-09-01

    Full Text Available Data is currently one of the most important assets for companies in every field. The continuous growth in the importance and volume of data has created a new problem: it cannot be handled by traditional analysis techniques. This problem was, therefore, solved through the creation of a new paradigm: Big Data. However, Big Data originated new issues related not only to the volume or the variety of the data, but also to data security and privacy. In order to obtain a full perspective of the problem, we decided to carry out an investigation with the objective of highlighting the main issues regarding Big Data security, and also the solutions proposed by the scientific community to solve them. In this paper, we explain the results obtained after applying a systematic mapping study to security in the Big Data ecosystem. It is almost impossible to carry out detailed research into the entire topic of security, and the outcome of this research is, therefore, a big picture of the main problems related to security in a Big Data system, along with the principal solutions to them proposed by the research community.

  17. Pricing end-of-life components

    Science.gov (United States)

    Vadde, Srikanth; Kamarthi, Sagar V.; Gupta, Surendra M.

    2005-11-01

    The main objective of a product recovery facility (PRF) is to disassemble end-of-life (EOL) products and sell the reclaimed components for reuse and recovered materials in second-hand markets. Variability in the inflow of EOL products and fluctuation in demand for reusable components contribute to the volatility in inventory levels. To stay profitable the PRFs ought to manage their inventory by regulating the price appropriately to minimize holding costs. This work presents two deterministic pricing models for a PRF bounded by environmental regulations. In the first model, the demand is price dependent and in the second, the demand is both price and time dependent. The models are valid for single component with no inventory replenishment sale during the selling horizon . Numerical examples are presented to illustrate the models.

  18. Principal component regression for crop yield estimation

    CERN Document Server

    Suryanarayana, T M V

    2016-01-01

    This book highlights the estimation of crop yield in Central Gujarat, especially with regard to the development of Multiple Regression Models and Principal Component Regression (PCR) models using climatological parameters as independent variables and crop yield as a dependent variable. It subsequently compares the multiple linear regression (MLR) and PCR results, and discusses the significance of PCR for crop yield estimation. In this context, the book also covers Principal Component Analysis (PCA), a statistical procedure used to reduce a number of correlated variables into a smaller number of uncorrelated variables called principal components (PC). This book will be helpful to the students and researchers, starting their works on climate and agriculture, mainly focussing on estimation models. The flow of chapters takes the readers in a smooth path, in understanding climate and weather and impact of climate change, and gradually proceeds towards downscaling techniques and then finally towards development of ...

  19. BUSINESS PROCESS MANAGEMENT SYSTEMS TECHNOLOGY COMPONENTS ANALYSIS

    Directory of Open Access Journals (Sweden)

    Andrea Giovanni Spelta

    2007-05-01

    Full Text Available The information technology that supports the implementation of the business process management appproach is called Business Process Management System (BPMS. The main components of the BPMS solution framework are process definition repository, process instances repository, transaction manager, conectors framework, process engine and middleware. In this paper we define and characterize the role and importance of the components of BPMS's framework. The research method adopted was the case study, through the analysis of the implementation of the BPMS solution in an insurance company called Chubb do Brasil. In the case study, the process "Manage Coinsured Events"" is described and characterized, as well as the components of the BPMS solution adopted and implemented by Chubb do Brasil for managing this process.

  20. GOATS - Orbitology Component

    Science.gov (United States)

    Haber, Benjamin M.; Green, Joseph J.

    2010-01-01

    The GOATS Orbitology Component software was developed to specifically address the concerns presented by orbit analysis tools that are often written as stand-alone applications. These applications do not easily interface with standard JPL first-principles analysis tools, and have a steep learning curve due to their complicated nature. This toolset is written as a series of MATLAB functions, allowing seamless integration into existing JPL optical systems engineering modeling and analysis modules. The functions are completely open, and allow for advanced users to delve into and modify the underlying physics being modeled. Additionally, this software module fills an analysis gap, allowing for quick, high-level mission analysis trades without the need for detailed and complicated orbit analysis using commercial stand-alone tools. This software consists of a series of MATLAB functions to provide for geometric orbit-related analysis. This includes propagation of orbits to varying levels of generalization. In the simplest case, geosynchronous orbits can be modeled by specifying a subset of three orbit elements. The next case is a circular orbit, which can be specified by a subset of four orbit elements. The most general case is an arbitrary elliptical orbit specified by all six orbit elements. These orbits are all solved geometrically, under the basic problem of an object in circular (or elliptical) orbit around a rotating spheroid. The orbit functions output time series ground tracks, which serve as the basis for more detailed orbit analysis. This software module also includes functions to track the positions of the Sun, Moon, and arbitrary celestial bodies specified by right ascension and declination. Also included are functions to calculate line-of-sight geometries to ground-based targets, angular rotations and decompositions, and other line-of-site calculations. The toolset allows for the rapid execution of orbit trade studies at the level of detail required for the

  1. Models for integrated components coupled with their EM environment

    NARCIS (Netherlands)

    Ioan, D.; Schilders, W.H.A.; Ciuprina, G.; Meijs, van der N.P.; Schoenmaker, W.

    2008-01-01

    Abstract: Purpose – The main aim of this study is the modelling of the interaction of on-chip components with their electromagnetic environment. Design/methodology/approach – The integrated circuit is decomposed in passive and active components interconnected by means of terminals and connectors

  2. Tomato sorting using independent component analysis on spectral images

    NARCIS (Netherlands)

    Polder, G.; Heijden, van der G.W.A.M.; Young, I.T.

    2003-01-01

    Independent Component Analysis is one of the most widely used methods for blind source separation. In this paper we use this technique to estimate the most important compounds which play a role in the ripening of tomatoes. Spectral images of tomatoes were analyzed. Two main independent components

  3. Examples on cold forged aluminium components in automotive industry

    DEFF Research Database (Denmark)

    Bay, Niels; Kolsgaard, A.

    2000-01-01

    The present paper describes the possibilites of applying cold forging for manufacturing of light weight components in aluminium. A short description of the basic cold forming processes forms the basis for describing the great variety in design of cold forged components. Examples are mainly taken ...... from automotive industry but in a few cases also from other industrial sectors to show the possibilities....

  4. A random walk down Main Street

    Directory of Open Access Journals (Sweden)

    David Matthew Levinson

    2016-08-01

    Full Text Available US suburbs have often been characterized by their relatively low walk accessibility compared to more urban environments, and US urban environments have been char- acterized by low walk accessibility compared to cities in other countries. Lower overall density in the suburbs implies that activities, if spread out, would have a greater distance between them. But why should activities be spread out instead of developed contiguously? This brief research note builds a positive model for the emergence of contiguous development along “Main Street” to illustrate the trade-offs that result in the built environment we observe. It then suggests some policy interventions to place a “thumb on the scale” to choose which parcels will develop in which sequence to achieve socially preferred outcomes.

  5. Mortise terrorism on the main pipelines

    Science.gov (United States)

    Komarov, V. A.; Nigrey, N. N.; Bronnikov, D. A.; Nigrey, A. A.

    2018-01-01

    The research aim of the work is to analyze the effectiveness of the methods of physical protection of main pipelines proposed in the article from the "mortise terrorism" A mathematical model has been developed that made it possible to predict the dynamics of "mortise terrorism" in the short term. An analysis of the effectiveness of physical protection methods proposed in the article to prevent unauthorized impacts on the objects under investigation is given. A variant of a video analytics system has been developed that allows detecting violators with recognition of the types of work they perform at a distance of 150 meters in conditions of complex natural backgrounds and precipitation. Probability of detection is 0.959.

  6. Siberian snakes for the Fermilab Main Injector

    International Nuclear Information System (INIS)

    Anferov, V.A.; Baiod, R.; Courant, E.D.

    1993-01-01

    Appropriate Siberian snakes were designed to maintain the proton beam polarization during acceleration in the Fermilab Main Injector from 8 to 150 GeV. Various snake designs were investigated to find one fitting into the 14 m straight section spaces with the required spin rotation axis and the minimum orbit excursion. The authors studied both cold and warm discrete magnet snakes as well as warm snakes with helical magnets. For the warm discrete magnet snake, obtaining small orbit excursions required a nearly longitudinal snake axis, while axes near ±45 degrees are needed when using two snakes in a ring. The authors found acceptable snakes either by using superconducting magnets or by using warm magnets with a helical dipole field

  7. CBA main magnet power supply ripple reduction

    International Nuclear Information System (INIS)

    Bagley, G.; Edwards, R.J.

    1983-01-01

    The preliminary results of a development program to minimize beam perturbation resulting from ripple current generated by the CBA Main Magnet Power Supply are presented. The assessment of the magnitude and causes of the ripple generated led to a modification of the SCR Gate Driver and the addition of a bandpass amplifier correction loop which gave significant improvement. A description of the changes made and the results obtained are included. A second design approach was developed in which the timing of the SCR gate pulses is directly determined by a VCO. The results reported with this VCO Loop indicate superior performance particularly at frequencies below 60 Hz. A shunt transistor regulator design is proposed to minimize higher SCR switching frequency harmonics

  8. BANKING ETHICS: MAIN CONCEPTIONS AND PROBLEMS

    Directory of Open Access Journals (Sweden)

    VALENTINA FETINIUC

    2014-10-01

    Full Text Available Banking ethics is a specialized set of ethical standards and rules that should be followed in the activities of financial institutions and employees of the banking sector. But despite the simplicity of the definition, in the modern world, this concept becomes complex and ambiguous. The importance of studying this subject is defined by the fact that the ethical behavior of the bank and bank employees promotes banking. At present there are several conceptions of banking ethics: general ethics, regulated ethics and ethical bank. The most common practice is to regulate internal and external relations of banks and bank workers with ethical codes. At the same time, studies show the existence of problems in the banking standards of ethics, which negatively affects the financial institution. This article is intended to reflect main tendencies and problems of banking ethics at international level and experience of Republic of Moldova in this field.

  9. Seismic risks at Elsie Lake Main Dam

    International Nuclear Information System (INIS)

    McCammon, N.R.; Momenzadeh, M.; Hawson, H.H.; Nielsen, N.M.

    1991-01-01

    The Elsie Lake dams are located on Vancouver Island in an area of high seismic risk. A safety review in 1986 indicated potential deficiencies in the earthfill main dam with respect to modern earthquake design standards. A detailed field investigation program comprising drilling and penetration tests was carried out and the results used in an assessment of seismic stability. A 0.8 m thick less dense layer in the granular shell of the dam, possibly caused by wet construction conditions, would likely liquefy in a major earthquake but sufficient residual strength would likely remain to prevent catastrophic failure. The dam shell might undergo some distortion, and an assessment was initiated to determine the requirements for reservoir drawdown following an extreme earthquake to ensure the timely lowering of the reservoir for inspection and repair. It was suggested that an adequate evacuation capability would be 25% and 50% drawdown in not more than 30 and 50 days, respectively. 9 refs., 11 figs., 1 tab

  10. PS main supply: motor-generator set.

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    In picture 04 the motor is on the right in the background and the main view is of the generator. The peak power in each PS cycle drawn from the generator, up to 96 MW, is taken from the rotational kinetic energy of the rotor (a heavy-weight of 80 tons), which makes the rotational speed drop by only a few percent. The motor replenishes the average power of 2 to 4 MW. Photo 05: The motor-generator set is serviced every year and, in particular, bearings and slip-rings are carefully checked. To the left is the motor with its slip-rings visible. It has been detached from the axle and moved to the side, so that the rotor can be removed from the huge generator, looming at the right.

  11. VAT EVASION INLEBANON: CASES AND MAIN CAUSES

    Directory of Open Access Journals (Sweden)

    Rana Ismail

    2012-07-01

    Full Text Available The Value Added Tax (VAT is a very important source oftreasuryrevenuesinLebanon. It was initially introduced inLebanon in order to reduce the budgetdeficit and help contain the debt. However, VAT evasion growth inLebanon isleading to significant VAT revenue losses because of its size and frequency.In this paper, we will highlight the contribution of VAT to the treasury revenue. Inaddition, our research has led to figure out the most significant VAT evasion casesand the way tax payers evade paying their required VAT or try to have an illegalrefund. From these tax evasion cases, we will pinpoint the main causes of suchevasions and propose solutions to limit as much as possible VAT evasion inLebanon.

  12. Main clinical epidemiological features of lung cancer

    International Nuclear Information System (INIS)

    Costa Montane, Daniel Marino; Prado Lage, Yulien; Lozano Salazar; Jorge Luis

    2011-01-01

    A descriptive and cross-sectional study of 95 patients with lung cancer, discharged from Neumology Service at 'Dr Juan Bruno Zayas Alfonso' General Hospital in Santiago de Cuba, was carried out from January, 2008 to December, 2008 in order to identify the main clinical epidemiological features of the aforementioned disease. A malignancy predominance among men aged between 56 and 65 years old, belonging to urban areas and being heavy smoker (out of 30 cigarettes per day over 30 years ), was found. Those affected without a confirmed histological type and IV clinical stage epidermoid carcinoma were predominant. Most of them had the opportunity to be treated. Increasing and intensifying health promotion and disease prevention campaigns were recommended so as to achieve the population to avoid or quit the smoking habit. (author)

  13. Main Achievements 2003-2004 - Astrophysics

    International Nuclear Information System (INIS)

    2005-01-01

    Physical mechanisms responsible for generating flat rotation curves of spiral galaxies were identified which serve the same role as the dark matter component. Identifying the actual physical cause of flat rotation curves is a vital task of astroparticle research. A popular view that dark matter is responsible for additional gravity in spiral galaxies corresponds to the Newtonian limit. When general relativity is considered, new possibilities should be considered. We have shown that the Vaidya metric in the weak-field approximation generates gravitational acceleration which depends on radial distance in such a way that the galactic rotation curve is flat. The Vaidya metric corresponds to gravity induced by a radial flow of energy. Also, large scale galactic magnetic field can contribute to the force governing the rotation curve of the gas component. This is because there is always some ionized fraction of gas in a galaxy which feels the Lorentz force. Ionized clouds exert pressure on neutral gas synchronizing its rotation. The observed rotation curve then follows a flat pattern. It is known that classical Newtonian dynamics admits canonically inequivalent Hamilton formulations. We have shown how such alternative Hamiltonians lead to non-canonical Poisson structures which may be considered as classical analogues of the non-canonical quantum commutation rules. After quantization, both canonical and non-canonical quantum systems obey the same Heisenberg equations of motion but many of their physical properties appear to be different. Alternative Hamiltonians cannot be identified with energy, which leads to non-standard thermodynamics. Coordinate operators become non-commutative which suggests noncommutative geometry of the underlying space time. We have solved the boson normal ordering problem for [q(a+)a + v(a+)]n with a single annihilation operator a and arbitrary functions q and v of the creation operator a+. Our method uses properties of exponential operators which

  14. MAIN DESTINATIONS AND TOURIST FLOWS ON THE YOUTH TRAVEL MARKET

    Directory of Open Access Journals (Sweden)

    Moisa Claudia

    2010-12-01

    Full Text Available Global tourism has seen an explosion since the ‘60s due to the post-war global economic growth and over the past two decades it recorded a significant increase, youth travel being the main component of this growth. According to experts, this type of tourism is in full evolution, young tourists representing an increasingly important segment of the global tourism market. Many experts in the tourism industry think youth travel is the fastest growing market segment, and the previsions of the World Tourism Organization estimate that in the near future youth travel will tote up 25% of the worldwide tourism market. On one hand, this phenomenon can be explain through the cultural motivation of the young people in practicing tourism, and on the other, through the relatively low or acceptable costs of transportation, especially for the youth in well developed countries.

  15. Towards Prognostics for Electronics Components

    Data.gov (United States)

    National Aeronautics and Space Administration — Electronics components have an increasingly critical role in avionics systems and in the development of future aircraft systems. Prognostics of such components is...

  16. Statistics of Shared Components in Complex Component Systems

    Science.gov (United States)

    Mazzolini, Andrea; Gherardi, Marco; Caselle, Michele; Cosentino Lagomarsino, Marco; Osella, Matteo

    2018-04-01

    Many complex systems are modular. Such systems can be represented as "component systems," i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf's law. Such "laws" affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the "core" genome in bacteria.

  17. Statistics of Shared Components in Complex Component Systems

    Directory of Open Access Journals (Sweden)

    Andrea Mazzolini

    2018-04-01

    Full Text Available Many complex systems are modular. Such systems can be represented as “component systems,” i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf’s law. Such “laws” affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the “core” genome in bacteria.

  18. Unblockable Compositions of Software Components

    DEFF Research Database (Denmark)

    Dong, Ruzhen; Faber, Johannes; Liu, Zhiming

    2012-01-01

    We present a new automata-based interface model describing the interaction behavior of software components. Contrary to earlier component- or interface-based approaches, the interface model we propose specifies all the non-blockable interaction behaviors of a component with any environment...... composition of interface models preserves unblockable sequences of provided services....

  19. On the Statistical Properties of the Lower Main Sequence

    International Nuclear Information System (INIS)

    Angelou, George C.; Bellinger, Earl P.; Hekker, Saskia; Basu, Sarbani

    2017-01-01

    Astronomy is in an era where all-sky surveys are mapping the Galaxy. The plethora of photometric, spectroscopic, asteroseismic, and astrometric data allows us to characterize the comprising stars in detail. Here we quantify to what extent precise stellar observations reveal information about the properties of a star, including properties that are unobserved, or even unobservable. We analyze the diagnostic potential of classical and asteroseismic observations for inferring stellar parameters such as age, mass, and radius from evolutionary tracks of solar-like oscillators on the lower main sequence. We perform rank correlation tests in order to determine the capacity of each observable quantity to probe structural components of stars and infer their evolutionary histories. We also analyze the principal components of classic and asteroseismic observables to highlight the degree of redundancy present in the measured quantities and demonstrate the extent to which information of the model parameters can be extracted. We perform multiple regression using combinations of observable quantities in a grid of evolutionary simulations and appraise the predictive utility of each combination in determining the properties of stars. We identify the combinations that are useful and provide limits to where each type of observable quantity can reveal information about a star. We investigate the accuracy with which targets in the upcoming TESS and PLATO missions can be characterized. We demonstrate that the combination of observations from GAIA and PLATO will allow us to tightly constrain stellar masses, ages, and radii with machine learning for the purposes of Galactic and planetary studies.

  20. On the Statistical Properties of the Lower Main Sequence

    Energy Technology Data Exchange (ETDEWEB)

    Angelou, George C.; Bellinger, Earl P.; Hekker, Saskia [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany); Basu, Sarbani [Department of Astronomy, Yale University, New Haven, CT 06520 (United States)

    2017-04-20

    Astronomy is in an era where all-sky surveys are mapping the Galaxy. The plethora of photometric, spectroscopic, asteroseismic, and astrometric data allows us to characterize the comprising stars in detail. Here we quantify to what extent precise stellar observations reveal information about the properties of a star, including properties that are unobserved, or even unobservable. We analyze the diagnostic potential of classical and asteroseismic observations for inferring stellar parameters such as age, mass, and radius from evolutionary tracks of solar-like oscillators on the lower main sequence. We perform rank correlation tests in order to determine the capacity of each observable quantity to probe structural components of stars and infer their evolutionary histories. We also analyze the principal components of classic and asteroseismic observables to highlight the degree of redundancy present in the measured quantities and demonstrate the extent to which information of the model parameters can be extracted. We perform multiple regression using combinations of observable quantities in a grid of evolutionary simulations and appraise the predictive utility of each combination in determining the properties of stars. We identify the combinations that are useful and provide limits to where each type of observable quantity can reveal information about a star. We investigate the accuracy with which targets in the upcoming TESS and PLATO missions can be characterized. We demonstrate that the combination of observations from GAIA and PLATO will allow us to tightly constrain stellar masses, ages, and radii with machine learning for the purposes of Galactic and planetary studies.

  1. Common Warm Dust Temperatures Around Main Sequence Stars

    Science.gov (United States)

    Morales, Farisa; Rieke, George; Werner, Michael; Stapelfeldt, Karl; Bryden, Geoffrey; Su, Kate

    2011-01-01

    We compare the properties of warm dust emission from a sample of main-sequence A-type stars (B8-A7) to those of dust around solar-type stars (F5-KO) with similar Spitzer Space Telescope Infrared Spectrograph/MIPS data and similar ages. Both samples include stars with sources with infrared spectral energy distributions that show evidence of multiple components. Over the range of stellar types considered, we obtain nearly the same characteristic dust temperatures (∼ 190 K and ∼60 K for the inner and outer dust components, respectively)-slightly above the ice evaporation temperature for the inner belts. The warm inner dust temperature is readily explained if populations of small grains are being released by sublimation of ice from icy planetesimals. Evaporation of low-eccentricity icy bodies at ∼ 150 K can deposit particles into an inner/warm belt, where the small grains are heated to dust Temperatures of -190 K. Alternatively, enhanced collisional processing of an asteroid belt-like system of parent planetesimals just interior to the snow line may account for the observed uniformity in dust temperature. The similarity in temperature of the warmer dust across our B8-KO stellar sample strongly suggests that dust-producing planetesimals are not found at similar radial locations around all stars, but that dust production is favored at a characteristic temperature horizon.

  2. Main Findings: Lessons to be Learnt

    International Nuclear Information System (INIS)

    2010-01-01

    This section summarizes the main lessons to be learnt from the workshop: 1 - Workshop Methodology: This method of work has proven to be successful. Participants appreciated the high level of interaction with the other colleagues, especially in view of the variety of expertise that was represented at the workshop. The method also affords the participants the opportunity to learn about the status of waste management in the host country, and to come into contact with the main actors. Conversely, the method also affords the host country programme added visibility at the international level. 2 - National Regulations and International Guidance and Bases for Criteria and Regulatory Judgement: There is reasonable consensus amongst national regulations on fundamental regulatory objectives, but much less agreement on the most appropriate criteria. Consensus is nationally and internationally hampered by the lack of common definition of concepts and terms. International guidance is interpreted in different ways in each country. International guidance is rather difficult to interpret, understand and apply. It is important that stakeholders understand the bases for regulatory judgements. 3 - Optimisation: The fundamental goals of optimisation need to be clarified. Optimisation of long-term vs. short-term safety remains problematic. The process of performing optimisation is more important than the numerical or scientific result. A transparent, stepwise and iterative process of decision making is essential for optimisation. The basic, broad rules for decision making and involvement of stakeholders need to be defined in advance. 4 - Technical Indicators for Safe Performance: The relative importance of different safety indicators varies with timescale. There is still much to be done before reaching consensus on the relative importance of different time frames. More discussion is needed on time cut-offs for regulatory compliance. More discussion on the meaning and applicability of

  3. The main pump motor remote visual check in the application of the domestic nuclear power plants

    International Nuclear Information System (INIS)

    Ge Lianwei; Yu Tao; Fang Jiang; Zhang Ting; Zhang Xingtian; Ding Youyuan

    2014-01-01

    In this paper, the Qinshan nuclear power station the first main pump motor to the successful implementation of remote visual inspection the main pump motor remote visual inspection applications. Qinshan Nuclear Power Plant Units 1 and 2 of the main pump motor inspection results show that the key components of the Qinshan Nuclear Power Plant Units 1 and 2 of the main pump rotor, stator end coils good condition, its problems for 10 years in the motor does not affect the normal use of the motor state disintegration overhaul problems tracking disintegration overhaul in 10 years. (authors)

  4. Maine Environmental Vulnerability Index (EVI) Atlas, Maine - 2007, maps in portable document format (NODC Accession 0036827)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This four volume set of Environmental Vulnerability Index Maps depicts environmental resources along the coast of Maine most at risk from oil spilled into the marine...

  5. Main attributes influencing spent nuclear fuel management

    International Nuclear Information System (INIS)

    Andreescu, N.; Ohai, D.

    1997-01-01

    All activities regarding nuclear fuel, following its discharge from the NPP, constitute the spent fuel management and are grouped in two possible back end variants, namely reprocessing (including HLW vitrification and geological disposal) and direct disposal of spent fuel. In order to select the appropriate variant it is necessary to analyse the aggregate fulfillment of the imposed requirements, particularly of the derived attributes, defined as distinguishing characteristics of the factors used in the decision making process. The main identified attributes are the following: - environmental impact, - availability of suitable sites, - non-proliferation degree, -strategy of energy, - technological complexity and technical maturity, -possible further technical improvements, - size of nuclear programme, - total costs, - public acceptance, - peculiarity of CANDU fuel. The significance of the attributes in the Romanian case, taking into consideration the present situation, as a low scenario and a high scenario corresponding to an important development of the nuclear power, after the year 2010, is presented. According to their importance the ranking of attributes is proposed . Subsequently, the ranking could be used for adequate weighing of attributes in order to realize a multi-criteria analysis and a relevant comparison of back end variants. (authors)

  6. EPR compared to international requirements (Mainly EUR)

    International Nuclear Information System (INIS)

    Broecker, B.

    1996-01-01

    A number of European Utilities have entered an agreement to write common requirements dedicated to future light water nuclear power plants to be built in Europe. The activities are known under the sign EUR (European Utilities Requirements). EPR, the future European Pressurized water Reactor, is the first installation of this type which will be operational from the year 2000 onwards, must fulfill the European requirements. EPR will serve as a test whether these requirements are realistic and well balanced. At the basic design stage of EPR, this paper concentrates on four main topics: the requirements which are new compared with existing reactors and which put a major challenge to the designer; the requirements today still open and the way they can be met by the EPR or not; the points for which already today the EPR special requirements exceed the EUR; the examples where the design of the EPR has given feedback which has led to a change of the EUR. EPR and EUR are different approaches to the reactor of the future. EUR is a set of requirements which leaves a flexibility to the designer while EPR is a real project which defines the technical solutions. EPR will fulfill the EUR and will at the same time serve as a test whether these requirements are realistic. EPR will also fulfill international requirements with minor changes. (J.S.). 7 figs

  7. CVD - main concepts, applications and restrictions

    International Nuclear Information System (INIS)

    Bliznakovska, B.; Milosevski, M.; Krawczynski, S.; Meixner, C.; Koetter, H.R.

    1993-01-01

    Despite of the fact that the existing literature covering the last two decades is plentiful with data related to CVD, this document is an attempt to provide to a reader a concise information about the nature of CVD technique at production of technologically important materials as well as to point at special references. The text is devided into three separate sections. The first section, The Main Features of CVD, is intended to give a complete comprehensive picture of the CVD technique through process description and characterization. The basic principles of thermodynamics, CVD chemical reactions classification, CVD chemical kinetics aspects and physics of CVD (with particular attention on the gas-flow phenomena) are included. As an additional aspect, in CVD unavoidable aspect however, the role of the coating/substrate compatibility on the overall process was outlined. The second section, CVD Equipment, concerns on the pecularities of the complete CVD unit pointing out the individual significances of the separate parts, i.e. pumping system, reactor chamber, control system. The aim of this section is to create to a reader a basic understanding of the arising problems but connected to be actual CVD performance. As a final goal of this review the reader's attention is turned upon the CVD applications for production of an up-to-date important class of coatings such as multilayer coatings. (orig.)

  8. Proposed Fermilab upgrade main injector project

    International Nuclear Information System (INIS)

    1992-04-01

    The US Department of Energy (DOE) proposes to construct and operate a ''Fermilab Main Injector'' (FMI), a 150 GeV proton injector accelerator, at the Fermi National Accelerator Laboratory (Fermilab) in Batavia, Illinois. The purpose and need for this action are given of this Environmental Assessment (EA). A description of the proposed FMI and construction activities are also given. The proposed FMI would be housed in an underground tunnel with a circumference of approximately 2.1 miles (3.4 kilometers), and the construction would affect approximately 135 acres of the 6,800 acre Fermilab site. The purpose of the proposed FMI is to construct and bring into operation a new 150 GeV proton injector accelerator. This addition to Fermilab's Tevatron would enable scientists to penetrate ever more deeply into the subatomic world through the detection of the super massive particles that can be created when a proton and antiproton collide head-on. The conversion of energy into matter in these collisions makes it possible to create particles that existed only an instant after the beginning of time. The proposed FMI would significantly extend the scientific reach of the Tevatron, the world's first superconducting accelerator and highest energy proton-antiproton collider

  9. Main prospects of EDF's nuclear program

    International Nuclear Information System (INIS)

    Pierre Bacher, M.; Jean Pierrard, M.

    1994-01-01

    Today, EDF is at a half way point in its third major standardized series, the N4 1400 MW series. The main objective agreed upon for this N4 series, was to improve the insertion of man in the control loop. After the TMI accident in 1979, selective improvements had already been introduced in the 900 series ; the 1300 series, which was the underway, was also the object of more significant improvements (for instance a digital control system) ; but it still seemed desirable that all the lessons to be learned from the accident be reflected in the third series : the fully computerized instrumentation and control system developed for the N4 series ?comparable to the one developed for Airbus ?is today the first of its kind in the world. The demand increase for electric energy dramatically stopped in 1993. However, the prospect for the coming years is more optimistic. Electricity consumption is expected to increase slowly by an average 2% per year. In this context, EDF is preparing its energy program for the nest century and takes into account that hydraulic generation capacity will remain stable and that the French thermal units fueled with coal are rather old and will have to be replaced.

  10. The two main theories on dental bruxism.

    Science.gov (United States)

    Behr, Michael; Hahnel, Sebastian; Faltermeier, Andreas; Bürgers, Ralf; Kolbeck, Carola; Handel, Gerhard; Proff, Peter

    2012-03-20

    Bruxism is characterized by non-functional contact of mandibular and maxillary teeth resulting in clenching or grating of teeth. Theories on factors causing bruxism are a matter of controversy in current literature. The dental profession has predominantly viewed peripheral local morphological disorders, such as malocclusion, as the cause of clenching and gnashing. This etiological model is based on the theory that occlusal maladjustment results in reduced masticatory muscle tone. In the absence of occlusal equilibration, motor neuron activity of masticatory muscles is triggered by periodontal receptors. The second theory assumes that central disturbances in the area of the basal ganglia are the main cause of bruxism. An imbalance in the circuit processing of the basal ganglia is supposed to be responsible for muscle hyperactivity during nocturnal dyskinesia such as bruxism. Some authors assume that bruxism constitutes sleep-related parafunctional activity (parasomnia). A recent model, which may explain the potential imbalance of the basal ganglia, is neuroplasticity. Neural plasticity is based on the ability of synapses to change the way they work. Activation of neural plasticity can change the relationship between inhibitory and excitatory neurons. It seems obvious that bruxism is not a symptom specific to just one disease. Many forms (and causes) of bruxism may exist simultaneously, as, for example, peripheral or central forms. Copyright © 2011 Elsevier GmbH. All rights reserved.

  11. Main physical problems of superhigh energy accelerators

    International Nuclear Information System (INIS)

    Lapidus, L.I.

    1979-01-01

    A survey is given of the state and prospects for the scientific researches to be carried out at the largest charged particle accelerators now under construction. The fundamental problems of the elementary particle physics are considered which can be solved on the base of experiments at high-energy accelerators. The problems to be solved involve development of the theory of various quark number, accurate determination of the charged and neutral intermediate vector boson masses in the Weinberg-Salam theory, the problem of production of t-quark, W -+ - and Z deg bosons, Higgs mesons and investigation of their interactions, examination of quark and lepton spectra, studies on the effects of strong interactions. As a result of the investigations on hadrons at maximum momentum transfers, the data on space-time structure at short distances can be obtained. It is emphasized that there are no engineering barriers to the construction of such accelerators. The main problem lies in financial investment. A conclusion is drawn that the next generation of accelerators will be developed on the base of cooperation between many countries [ru

  12. Brand new hall in the main building

    CERN Multimedia

    Corinne Pralavorio

    2014-01-01

    The renovation of the UNIQA and post office premises is getting under way, with their reopening scheduled for the spring.   The renovation of the large hall in the main building (Building 500) has finally reached the home straight. As of this week, building contractors will get to work on the last part – the offices of UNIQA and La Poste. In the last week of November, the two concessions moved their offices across Route Scherrer to the same part of Building 510 where UBS was temporarily housed during the bank’s refurbishment. Their services were therefore unavailable for one day. The renovation work will last until the spring, with the new offices expected to open in May 2015. Between now and then, the windows and insulation will be completely refitted, with a view to reducing heat loss considerably, and, above all, the premises will be modernised to improve customer reception and service. For example, UNIQA’s new premises will feature a confidential area, guarantee...

  13. Adding the s-Process Element Cerium to the APOGEE Survey: Identification and Characterization of Ce II Lines in the H-band Spectral Window

    Science.gov (United States)

    Cunha, Katia; Smith, Verne V.; Hasselquist, Sten; Souto, Diogo; Shetrone, Matthew D.; Allende Prieto, Carlos; Bizyaev, Dmitry; Frinchaboy, Peter; García-Hernández, D. Anibal; Holtzman, Jon; Johnson, Jennifer A.; Jőnsson, Henrik; Majewski, Steven R.; Mészáros, Szabolcs; Nidever, David; Pinsonneault, Mark; Schiavon, Ricardo P.; Sobeck, Jennifer; Skrutskie, Michael F.; Zamora, Olga; Zasowski, Gail; Fernández-Trincado, J. G.

    2017-08-01

    Nine Ce II lines have been identified and characterized within the spectral window observed by the Apache Point Observatory Galactic Evolution Experiment (APOGEE) survey (between λ1.51 and 1.69 μm). At solar metallicities, cerium is an element that is produced predominantly as a result of the slow capture of neutrons (the s-process) during asymptotic giant branch stellar evolution. The Ce II lines were identified using a combination of a high-resolution (R=λ /δ λ ={{100,000}}) Fourier Transform Spectrometer (FTS) spectrum of α Boo and an APOGEE spectrum (R = 22,400) of a metal-poor, but s-process enriched, red giant (2M16011638-1201525). Laboratory oscillator strengths are not available for these lines. Astrophysical gf-values were derived using α Boo as a standard star, with the absolute cerium abundance in α Boo set by using optical Ce II lines that have precise published laboratory gf-values. The near-infrared Ce II lines identified here are also analyzed, as consistency checks, in a small number of bright red giants using archival FTS spectra, as well as a small sample of APOGEE red giants, including two members of the open cluster NGC 6819, two field stars, and seven metal-poor N- and Al-rich stars. The conclusion is that this set of Ce II lines can be detected and analyzed in a large fraction of the APOGEE red giant sample and will be useful for probing chemical evolution of the s-process products in various populations of the Milky Way.

  14. Component Reification in Systems Modelling

    DEFF Research Database (Denmark)

    Bendisposto, Jens; Hallerstede, Stefan

    When modelling concurrent or distributed systems in Event-B, we often obtain models where the structure of the connected components is specified by constants. Their behaviour is specified by the non-deterministic choice of event parameters for events that operate on shared variables. From a certain......? These components may still refer to shared variables. Events of these components should not refer to the constants specifying the structure. The non-deterministic choice between these components should not be via parameters. We say the components are reified. We need to address how the reified components get...... reflected into the original model. This reflection should indicate the constraints on how to connect the components....

  15. Component Composition Using Feature Models

    DEFF Research Database (Denmark)

    Eichberg, Michael; Klose, Karl; Mitschke, Ralf

    2010-01-01

    interface description languages. If this variability is relevant when selecting a matching component then human interaction is required to decide which components can be bound. We propose to use feature models for making this variability explicit and (re-)enabling automatic component binding. In our...... approach, feature models are one part of service specifications. This enables to declaratively specify which service variant is provided by a component. By referring to a service's variation points, a component that requires a specific service can list the requirements on the desired variant. Using...... these specifications, a component environment can then determine if a binding of the components exists that satisfies all requirements. The prototypical environment Columbus demonstrates the feasibility of the approach....

  16. Performance Engineering Technology for Scientific Component Software

    Energy Technology Data Exchange (ETDEWEB)

    Malony, Allen D.

    2007-05-08

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress

  17. Geology of the Cupsuptic quadrangle, Maine

    Science.gov (United States)

    Harwood, David S.

    1966-01-01

    The Cupsuptic quadrangle, in west-central Maine, lies in a relatively narrow belt of pre-Silurian rocks extending from the Connecticut River valley across northern New Hampshire to north-central Maine. The Albee Formation, composed of green, purple, and black phyllite with interbedded-quartzite, is exposed in the core of a regional anticlinorium overlain to the southeast by greenstone of the Oquossoc Formation which in turn is overlain by black slate of the Kamankeag Formation. In the northern part of the quadrangle the Albee Formation is overlain by black slate, feldspathic graywacke, and minor greenstone of the Dixville Formation. The Kamankeag Formation is dated as 1-ate Middle Ordovician by graptolites (zone 12) found near the base of the unit. The Dixville Formation is correlated with the Kamankeag Formation and Oquossoc Formation and is considered to be Middle Ordovician. The Albee Formation is considered to be Middle to Lower Ordovician from correlations with similar rocks in northeastern and southwestern Vermont. The Oquossoc and Kamankeag Formations are correlated with the Amonoosuc and Partridge Formations of northern New Hampshire. The pre-Silurian rocks are unconformably overlain by unnamed rocks of Silurian age in the southeast, west-central, and northwest ninths of the quadrangle. The basal Silurian units are boulder to cobble polymict conglomerate and quartz-pebble conglomerate of late Lower Silurian (Upper Llandovery) age. The overlying rocks are either well-bedded slate and quartzite, silty limestone, or arenaceous limestone. Thearenaceous limestone contains Upper Silurian (Lower Ludlow) brachiopods. The stratified rocks have been intruded by three stocks of biotite-muscovite quartz monzonite, a large body of metadiorite and associated serpentinite, smaller bodies of gabbro, granodiorite, and intrusive felsite, as well as numerous diabase and quartz monzonite dikes. The metadiorite and serpentinite, and possibly the gabbro and granodiorite are Late

  18. Failure characteristic analysis of a component on standby state

    International Nuclear Information System (INIS)

    Shin, Sungmin; Kang, Hyungook

    2013-01-01

    Periodic operations for a specific type of component, however, can accelerate aging effects which increase component unavailability. For the other type of components, the aging effect caused by operation can be ignored. Therefore frequent operations can decrease component unavailability. Thus, to get optimum unavailability proper operation period and method should be studied considering the failure characteristics of each component. The information of component failure is given according to the main causes of failure depending on time flow. However, to get the optimal unavailability, proper interval of operation for inspection should be decided considering the time dependent and independent causes together. According to this study, gradually shorter operation interval for inspection is better to get the optimal component unavailability than that of specific period

  19. MAIN TRENDS OF MODERN ART EDUCATION

    Directory of Open Access Journals (Sweden)

    Alla Kozyr

    2016-04-01

    Full Text Available The article deals with the features of the development of art education in Ukraine from the standpoint of the philosophy of modern education. Requirements of educational training standards for future teachers are outlined. This requirements determine not only what teachers need to know, to be able to do, what skills have, but also to create a construction of teacher’s highly skilled work, focused on achieving acmeologic level with the fundamental principles of national identity, socio-cultural conformity, humanism, problematic, learner-centered approach and dialogization in the learning process. The importance of the problem of science-based strategy and tactics of the further development of teacher education as an integrated system of training highly qualified specialists are disclosed due to the modern issues of the educational process. The solution to this problem is aimed at improving the content of professional education of future teachers, which is associated with significant changes in the quality teachers training, which the present day requires. The possibility of improvement of this training can be realized thanks to the classification, validate and implement an integrated system of the formation of professional skills of future teachers, aimed at optimal achievement of the goal. Thus, the main trends of today’s art education are determined. Considering the professional skills of prospective music teachers can only be provided by methodological analysis of this concept, based on the provisions of the dialectical method, system approach and the theory of knowledge and research of the phenomenon of education as a condition of the formation of the perfect work of teachers, because it will justify the skill as a multifactorial and multifaceted phenomenon of education.

  20. Hotel Intercontinental, en Frankfurt-Main (Alemania

    Directory of Open Access Journals (Sweden)

    Apel, Otto

    1966-09-01

    Full Text Available This building has basements, and 21 storeys above the ground. The basements are occupied with the usual services, and a garage, for clients, capable of holding 500 cars. The concierge’s office, the reception office, main hall, restaurant and services are on the ground floor. On the first floor there is a large ball room, where 600 people can assemble, as well as other reception halls. On each of the 2nd to 18th floors there are thirty rooms of one type, and eighteen of another. A luxury apartment occupies the 19th floor, and a restaurant for 200 people as well as a bar is on the top floor. This hotel, which is slab shaped, fits well with its environment and is very pleasantly proportioned.Consta de: planta de sótanos, planta baja y 20 plantas de altura. La planta de sótano contiene las distintas instalaciones; dependencias del personal, etcétera, y un garaje, reservado para los viajeros, capaz de albergar 500 coches. La planta baja comprende: la conserjería, recepción, hall, restaurantes, etc. En la planta primera existe una gran sala de baile para 600 personas, salas de reuniones, etc. Las plantas, de la 2.ª a la 18.ª contienen treinta habitaciones de un tipo y dieciocho de otro, en cada planta. En la planta 19.ª hay un apartamento de lujo. Y en la última planta se distribuyen: un restaurante para 200 personas, bar, etc. El bloque, dentro de su configuración paralelepipédica, es de forma armónica y está perfectamente encajado en el paisaje urbano circundante.