WorldWideScience

Sample records for magnesium alloy sheets

  1. The Formablity of AZ31B Magnesium Alloy Sheet

    Institute of Scientific and Technical Information of China (English)

    WANG Lingyun; LU Zhiwen; ZHAO Yazhong; QIU Xiaogang

    2006-01-01

    The forming limit diagrams(FLD)of AZ31B magnesium alloy sheet were tested by means of the electro etching grid method based on the forming experiment of magnesium alloy sheet carried out with a BCS-30D sheet forming testing machine and the strain testing analysis made with an advanced ASAME automatic strain measuring system. Experiments show that, at room temperature, the mechanical properties and deep drawing performance of AZ31B cold-rolled magnesium alloy sheet were so poor that it failed to test the forming limit diagrams without an ideal forming and processing capacity, while the hot-rolled magnesium alloy sheet was of a little better plasticity and forming performance after testing its forming limit diagrams. It can be concluded that the testing of the forming limit curves (FLC)offers the theoretical foundation for the drawing of the deep drawing and forming process of magnesium alloy sheet.

  2. Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

  3. Microstructural evolvement of wrought magnesium alloy sheet during heat treatment

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Magnesium alloy is the lightest structural metal material. As its ductility is usually limited because of its hexagonal closest packing (hcp) structure, it is significant to improve its forming performance. The primary way to achieve this goal is by grain refinement. This study explores new ways of grain refinement for cold-rolled sheet of magnesium alloy AZ31B by probing into its structural evolvement in heat treatment. It is found that recrystallization mostly takes place in the cold-rolled sheet in heattreatment, and refined and equiaxial recrystallization grains with an average diameter of (14 to 15) μm can be obtained by heattreatment at 260 °C for (60 to 90) min, which is an effective method to obtain refined symmetrical grains of magnesium alloy by heat treatment at a lower recrystallization temperature after cold-rolling.

  4. Stamping Formability of ZE10 Magnesium Alloy Sheets

    Institute of Scientific and Technical Information of China (English)

    Liu Ying; Li Yuanyuan; Li Wei

    2007-01-01

    ZE10 magnesium alloy sheets were prepared through ingot casting and the hot-rolling process. The mechanical properties, conical cup value (CCV), bore expanding performance, and limit drawing ratio (LDR) were investigated to examine the stamping formability of ZE10 alloy sheets, at temperatures ranging from 20 to 300 ℃. The results showed that the tensile strength decreased, whereas, plasticity, drawing-bulging performance, bore expanding properties, and deep drawing performance increased markedly at elevated temperatures. The CCV specimens could be drawn into the conical die's underside cylindrical hole from the conical cliff, without cracking, and could have the minimum CCV at 200 and 250 ℃. In the bore-expanding test, the bore (Φ10 mm) could be expanded to the dimension of the punch (Φ25 mm) and the maximum bore-expanding ratio could be achieved at above 150 ℃. The limiting drawing ratio (LDR) of 2.85 is acquired during the deep drawing test at 230 ℃ with the punch temperature of 20~ 50 ℃, the punch velocity of 50 mm·min-1, and the mixture of graphite and cylinder grease as lubricant.

  5. Effects of production parameters on characteristics of magnesium alloy sheets manufactured by twin-roll casting

    OpenAIRE

    H.Watari; Haga, T.; Davey, K.; Koga, N; Yamazaki, T.

    2006-01-01

    Purpose: : The purpose of the work is to establish a manufacturing process and technology to facilitate the economical manufacture of high-quality magnesium sheet alloys.Design/methodology/approach: Magnesium alloy AZ31B was used to investigate the appropriate manufacturing conditions for use in twin-roll strip casting. Temperatures of the molten materials and roll speeds were varied to find the appropriate manufacturing conditions. The effects of manufacturing conditions on possible forming ...

  6. Effects of production parameters on characteristics of magnesium alloy sheets manufactured by twin-roll casting

    Directory of Open Access Journals (Sweden)

    H. Watari

    2006-04-01

    Full Text Available Purpose: : The purpose of the work is to establish a manufacturing process and technology to facilitate the economical manufacture of high-quality magnesium sheet alloys.Design/methodology/approach: Magnesium alloy AZ31B was used to investigate the appropriate manufacturing conditions for use in twin-roll strip casting. Temperatures of the molten materials and roll speeds were varied to find the appropriate manufacturing conditions. The effects of manufacturing conditions on possible forming were clarified in terms of roll speeds and roll gaps between upper and lower rolls.Findings: In the hot-rolling process, a temperature exceeding 200°C was chosen to keep cast products from cracking. An appropriate annealing temperature was effective for homogenizing the microstructure of the rolled cast sheets after the strip casting process. The grain size of the manufactured wrought magnesium alloys sheet was less than 10 micrometers. The obtained magnesium alloy sheet exhibited an equivalent limiting drawing ratio in a warm-drawing test.Research limitations/implications: AZ31 were used to investigate the appropriate manufacturing conditions for use in twin-roll strip casting. Casting temperatures were varied from 630°C to 670°C to find the best casting conditions. Roll casting speeds were varied from 5m/min to 30 m/min in order to examine which roll speed was appropriate for solidifying the molten magnesium.Practical implications: It was found that the cast magnesium sheet manufactured by roll strip casting could be used for plastic forming if the appropriate magnesium sheets were produced after the roll casting process.Originality/value: This paper showed the effectiveness of twin roll casting for magnesium alloys by a horizontal roll caster.

  7. Effect of Alternating Bending on Texture, Structure, and Elastic Properties of Sheets of Magnesium Lithium Alloy

    Directory of Open Access Journals (Sweden)

    N. M. Shkatulyak

    2015-01-01

    Full Text Available The effect of low-cycle alternating bending at room temperature on the crystallographic texture, metallographic structure, and elastic properties of sheets of MgLi5 (mass magnesium alloy after warm cross-rolling has been studied. Texture of alloy is differed from the texture of pure magnesium. The initial texture of alloy is characterized by a wide scatter of basal poles in the transverse direction. In the process of alternating bending, the changes in the initial texture and structure (which is represented by equiaxed grains containing twins lead to regular changes in the anisotropy of elastic properties.

  8. Finite element simulation on press forging of magnesium alloy AZ31 sheets

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Press forging of rectangular box of magnesium alloy AZ31 sheets was investigated at elevated temperatures.The characteristics of metal flow were analyzed on the basis of finite element method(FEM)and experiments.Effects of friction factor and sidewall thickness on metal flow and boss forming were investigated by FEM.The results indicate that the bosses and the sidewall of the rectangular box are formed unevenly due to the uneven flow of the metal.The increase in friction factor at die/sheet interface improves the metal flow pattem and the efficiency of boss forming,but reduces the sidewall uniformity.Decrease in sidewall thickness enhances boss forming efficiency,whereas the punch load increases in this case.The present work can provide rcasonable parameters and design guideline for the practical press foxing process of magnesium alloy sheets.

  9. Effects of organic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheet

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Blawert, C.; Scharnagl, N.;

    2010-01-01

    mu m of the contaminated surface was required to reach corrosion rates less than 1 mm/year in salt spray condition. Among the three organic acids examined, acetic acid is the best choice. Oxalic acid can be an alternative while citric acid is not suitable for cleaning AZ31 sheet, because......Organic acids were used to clean AZ31 magnesium alloy sheet and the effect of the cleaning processes on the surface condition and corrosion performance of the alloy was investigated. Organic acid cleanings reduced the surface impurities and enhanced the corrosion resistance. Removal of at least 4...

  10. Texture Control of Aluminum, Iron, and Magnesium Alloy Sheets to Increase Their Plastic Strain Ratios

    Science.gov (United States)

    Lee, Dong Nyung; Han, Heung Nam

    2011-08-01

    It is known that the limiting drawing ratio of sheet metals is proportional to their plastic strain ratios, and the plastic strain ratios of fcc and bcc metal sheets increase with increasing //ND component in their textures. Conventional cold rolling and subsequent annealing of fcc metals cannot give rise to the //ND component. Specifically, the cold rolling texture of polycrystalline fcc metals is characterized by the fiber connecting the {112}, {123}, and {011} orientations in the Euler space, which is often called the β-fiber. The density of each component in the fiber depends on the stacking fault energy of metals. The {112} and {123} textured Al alloy sheets evolve the {001} texture, when recrystallized. The low plastic strain ratios of the Al alloy sheets are attributed to the {001} texture. The //ND texture can be obtained in shear deformed fcc sheets. Bcc steels develop the //ND texture when cold rolled and recrystallized. However, the density of //ND depends on the content of dissolved interstitial elements such as carbon and nitrogen. The density of the //ND component decreases with increasing concentration of the dissolved interstitial elements. For a given steel, the density of the //ND component can vary with varying thermomechanical treatment. Magnesium alloy sheets are subjected to sheet forming processes at temperatures of 200 °C or higher because of their basal plane texture, or the //ND orientation. Many studies have been made to alleviate the component so that the magnesium alloy sheets can have better formability. In this article, the above issues are briefly reviewed and discussed.

  11. Lap Fillet Welding of Thin Sheet AZ31 Magnesium Alloy with Pulsed Nd:YAG Laser

    Science.gov (United States)

    Ishak, Mahadzir; Yamasaki, Kazuhiko; Maekawa, Katsuhiro

    In recent years, reducing the size and weight of consumer products requires the joining of thin sheets of magnesium alloys with both thickness and joining area of less than 1mm, especially for packaging purposes. Conventional welding processes are difficult to joint a thin sheet magnesium alloy because of high heat input, which in turns leads to various problems such as burn through and cracks. In this study, lap fillet welding of thin sheet magnesium alloy AZ31B with a thickness of 0.3 mm has been carried out using a pulsed Nd:YAG laser beam. The influences of gap, laser beam center location and scan speed on joint appearances have been investigated. It was found that defects were significantly reduced when the gap width was less than 35 µm when the laser beam center was located just on the edge of the upper specimen (x=0), and scan speed was varied from 400 to 450 m/min. Wider bond width at average value of 300 µm was achieved when the beam center was at x=0 with a wide range of scan speeds from 250 to 450 mm/min compared with the cases at x=-0.1 and -0.2 mm from edge. Increases in bond width and minimal defects at x=0 improve fracture load by 68% compared with those at x=-0.1 mm.

  12. Influence of inorganic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheet

    DEFF Research Database (Denmark)

    Nwaogu, Ugochukwu Chibuzoh; Blawert, C.; Scharnagl, N.

    2009-01-01

    was investigated. Sulphuric, nitric and phosphoric acids of different concentrations were used to clean the alloy for various pickling times. The surface morphology, composition and phases were elucidated using scanning electron microscopy, X-ray fluorescence analysis, spark discharge-optical emission spectroscopy...... the corrosion resistance of the alloy. The cleaning efficiency of the three acids used and the corrosion protection mechanisms were found to be remarkably different. Best corrosion results were obtained with nitric acid, followed closely by phosphoric acid. Only the sulphuric acid failed more or less when...... of micro-galvanic couples and can therefore increase corrosion attack on these alloys. Due to this influence they should be removed to obtain good corrosion resistance. In this study, the effect of inorganic acid pickling on the corrosion behaviour of a commercial AZ31 magnesium alloy sheet...

  13. Failure Analysis of Warm Stamping of Magnesium Alloy Sheet Based on an Anisotropic Damage Model

    Science.gov (United States)

    Zhao, P. J.; Chen, Z. H.; Dong, C. F.

    2014-11-01

    Based on the frame work of continuum damage mechanics, a research work of anisotropic damage evolution in warm stamping process of magnesium alloy sheets has been carried out by means of a combined experimental-numerical method. The aim was to predict formability of warm stamping of AZ31 Mg alloy sheets by taking the thermal and damage effects into account. In the presented work, a temperature-dependent anisotropic yield function suitable for cold rolling sheet metals together with an anisotropic damage model was implemented into the a VUMAT subroutine for ABAQUS/EXPLICIT. The evolution of internal damage in the form of void growth and coalescence in AZ31 Mg alloy sheet was observed by means of scanning electron microscopy (SEM). Moreover, a coupled thermo-mechanical simulation of the stamping process was performed using the implemented code at different temperatures. The parameters employed in the simulation were determined by the standard tensile tests and algebraic manipulation. The overall anisotropic damage process from crack initiation to final propagation in local area of blank was simulated. Numerical results show that the prediction of the site of crack initiation and the orientation of crack propagation are consistent with the data observed in warm stamping experiments.

  14. Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

    Science.gov (United States)

    Ying-hong, Peng; Qun-feng, Chang; Da-yong, Li; Xiao-qin, Zeng

    2007-05-01

    AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet.

  15. Deformation behaviors of magnesium alloy AZ31 sheet in cold deep drawing

    Institute of Scientific and Technical Information of China (English)

    YANG Lian-fa; MORI Ken-ichiro; TSUJI Hirokazu

    2008-01-01

    To investigate how the popular magnesium alloy AZ31 sheet (aluminum 3%, zinc 1%) behaves in cold working, deep drawing experiments at room temperature, along with finite element(FE) simulation,were performed on the cold forming sheet of the AZ31 alloy after being annealed under various conditions. The activities were focused on the fracture pattern, limit drawing ratio(LDR), deformation load, thickness distribution, anisotropic effect, as well as the influences of the annealing conditions and tool configuration on them. The results display that punch shoulder radius instead of die clearance, has much influence on the thickness distribution. The anisotropy is remarkable in cold working, which adversely impacts the LDR. The fracture often happens on the side wall at an angle to axis of the deformed specimen. The results also imply that the LDR for the material under present experimental conditions is 1.72, and annealing the material at 450 ℃ for 1 h may be preferable for the cold deep drawing.

  16. Influence of Tension-Compression Asymmetry on the Mechanical Behavior of AZ31B Magnesium Alloy Sheets in Bending

    Science.gov (United States)

    Zhou, Ping; Beeh, Elmar; Friedrich, Horst E.

    2016-03-01

    Magnesium alloys are promising materials for lightweight design in the automotive industry due to their high strength-to-mass ratio. This study aims to study the influence of tension-compression asymmetry on the radius of curvature and energy absorption capacity of AZ31B-O magnesium alloy sheets in bending. The mechanical properties were characterized using tension, compression, and three-point bending tests. The material exhibits significant tension-compression asymmetry in terms of strength and strain hardening rate due to extension twinning in compression. The compressive yield strength is much lower than the tensile yield strength, while the strain hardening rate is much higher in compression. Furthermore, the tension-compression asymmetry in terms of r value (Lankford value) was also observed. The r value in tension is much higher than that in compression. The bending results indicate that the AZ31B-O sheet can outperform steel and aluminum sheets in terms of specific energy absorption in bending mainly due to its low density. In addition, the AZ31B-O sheet was deformed with a larger radius of curvature than the steel and aluminum sheets, which brings a benefit to energy absorption capacity. Finally, finite element simulation for three-point bending was performed using LS-DYNA and the results confirmed that the larger radius of curvature of a magnesium specimen is mainly attributed to the high strain hardening rate in compression.

  17. In-process tool force and rotation variation to control sheet thickness change in friction stir welding of magnesium alloys

    Science.gov (United States)

    Buffa, Gianluca; Fratini, Livan; Simoncini, Michela; Forcellese, Archimede

    2016-10-01

    Two different in-process control strategies, developed in order to produce sound joints in AZ31 magnesium alloy by Friction Stir Welding on sheet blanks with a non-uniform thickness, are presented and compared. To this purpose, sheets with dip or hump were machined and welded by either changing the rotational speed or the tool plunging in order to keep constant the vertical force occurring during welding. The mechanical strength of the joints was measured in the zones where the sheets before welding were characterised by different thicknesses. The sheets welded by the two different strategies are characterized by very similar ultimate tensile strength values. Finally, the results showed that the two approaches permit to successfully weld sheets with non-uniform thickness with a reduced loss in the mechanical strength.

  18. Failure analysis of AZ31 magnesium alloy sheets based on the extended GTN damage model

    Science.gov (United States)

    Wang, Rui-ze; Chen, Zhang-hua; Li, Yu-jie; Dong, Chao-fang

    2013-12-01

    Based on the Gurson-Tvergaard-Needleman (GTN) model and Hill's quadratic anisotropic yield criterion, a combined experimental-numerical study on fracture initiation in the process of thermal stamping of Mg alloy AZ31 sheets was carried out. The aim is to predict the formability of thermal stamping of the Mg alloy sheets at different temperatures. The presented theoretical framework was implemented into a VUMAT subroutine for ABAQUS/EXPLICIT. Internal damage evolution due to void growth and coalescence developed at different temperatures in the Mg alloy sheets was observed by scanning electron microscopy (SEM). Moreover, the thermal effects on the void growth, coalescence, and fracture behavior of the Mg alloy sheets were analyzed by the extended GTN model and forming limit diagrams (FLD). Parameters employed in the GTN model were determined from tensile tests and numerical iterative computation. The distribution of major and minor principal strains in the specimens was determined from the numerical results. Therefore, the corresponding forming limit diagrams at different stress levels and temperatures were drawn. The comparison between the predicted forming limits and the experimental data shows a good agreement.

  19. Failure analysis of AZ31 magnesium alloy sheets based on the extended GTN damage model

    Institute of Scientific and Technical Information of China (English)

    Rui-ze Wang; Zhang-hua Chen; Yu-jie Li; Chao-fang Dong

    2013-01-01

    Based on the Gurson-Tvergaard-Needleman (GTN) model and Hill’s quadratic anisotropic yield criterion, a combined experimental-numerical study on fracture initiation in the process of thermal stamping of Mg alloy AZ31 sheets was carried out. The aim is to predict the formability of thermal stamping of the Mg alloy sheets at diff erent temperatures. The presented theoretical framework was implemented into a VUMAT subroutine for ABAQUS/EXPLICIT. Internal damage evolution due to void growth and coalescence developed at diff erent temperatures in the Mg alloy sheets was observed by scanning electron microscopy (SEM). Moreover, the thermal eff ects on the void growth, coalescence, and fracture behavior of the Mg alloy sheets were analyzed by the extended GTN model and forming limit diagrams (FLD). Parameters employed in the GTN model were determined from tensile tests and numerical iterative computation. The distribution of major and minor principal strains in the specimens was determined from the numerical results. Therefore, the corresponding forming limit diagrams at diff erent stress levels and temperatures were drawn. The comparison between the predicted forming limits and the experimental data shows a good agreement.

  20. Effect of microalloying (Ca, Sr, and Ce) on elevated temperature tensile behavior of AZ31 magnesium sheet alloy

    Energy Technology Data Exchange (ETDEWEB)

    Shang, L., E-mail: lihong.shang@mail.mcgill.ca [McGill University, Dept. of Materials Eng., Montreal, QC H3A 2B2 (Canada); Yue, S. [McGill University, Dept. of Materials Eng., Montreal, QC H3A 2B2 (Canada); Verma, R.; Krajewski, P. [General Motors Research and Development Center, Warren, MI 48090 (United States); Galvani, C.; Essadiqi, E. [Natural Resources Canada-CANMET, Ottawa, ON K1A 0G1 (Canada)

    2011-04-25

    Research highlights: {yields} Hot tensile behavior of AZ31 sheet microalloyed with Ca, Sr and Ce was investigated. {yields} Under superplastic conditions the formability is notably improved by microalloying. {yields} Second phase particles resist grain coarsening and retard cavitations' development. {yields} Under the high Z conditions the deformation is controlled by the dislocation creep. {yields} Under the low Z conditions the deformation is controlled by grain boundary sliding. - Abstract: The effect of microalloying with calcium, strontium, and cerium on the microstructure and the elevated temperature deformation behavior of magnesium sheet alloy AZ31 was investigated. Base composition and microalloyed AZ31 materials were cast and rolled into wrought sheet by an identical thermo-mechanical process. A series of hot tensile tests (temperatures of 300 deg. C, 400 deg. C, and 450 deg. C; constant true strain rates of 0.1 s{sup -1}, 0.01 s{sup -1}, 0.001 s{sup -1}, and 0.0003 s{sup -1}) were performed to characterize the deformation behavior of the sheet alloys. Interrupted tensile tests were used to study microstructural evolution with strain. A well-dispersed and thermally stable second phase produced by microalloying refines, stabilizes the grain structure, and significantly enhances hot formability of AZ31 sheet. The enhancement is most pronounced under deformation conditions of 450 deg. C and; 0.0003 s{sup -1} strain rate, with tensile elongation increasing from 347% for the base alloy, to 406% with Ca only, 437% with Ca and Ce, and 552% with Ca, Sr and Ce for microalloyed AZ31 alloys. The second phase particles resist grain coarsening, promote grain boundary sliding, retard strain localization or necking, and postpone cavitation to higher strain levels to achieve this improvement in formability.

  1. Experimental investigation on fiber and CO2 inert gas fusion cutting of AZ31 magnesium alloy sheets

    Science.gov (United States)

    Scintilla, L. D.; Tricarico, L.

    2013-03-01

    The influence of processing parameters and laser source type on cutting edge quality of AZ31 magnesium alloy sheets and differences in cutting efficiency between fiber and CO2 lasers were studied. A first part of the cutting experiments compared a fiber and CO2 laser source when cutting 1 mm thick sheets in continuous wave mode and using Argon as an assist gas. The effects of cutting speed and assist gas pressure were investigated and optimal conditions were identified. In the second part of the experimental investigation, 3.3 mm thick sheets were cut using fiber laser. Focal position and cutting speed were varied in order to detect the optimal combination of processing parameters to obtain the best edge quality. For both sheet thicknesses investigated, surface roughness, dross height, and striation pattern inclination were measured. Cutting quality assessment and classification was carried out according to UNI EN ISO 9013 standard. Results showed that productivity, process efficiency and cutting edges quality obtained using fiber lasers outperform CO2 laser performances and therefore are considered suitable for application like sheet metal trimming.

  2. Theorical study on mechanical properties of AZ31B Magnesium alloy Sheets under multiaxial loading

    Directory of Open Access Journals (Sweden)

    A. Znaidi

    2016-10-01

    Full Text Available Numerical simulation by plastic deformation of the shaping processes currently has a large industrial interest. It allows you to shorten the time of design and construction related products and tools to analyze and to optimize processes. An essential part of simulation tools is the constitutive law used to describe the material used. The activity of characterization and modeling of material behavior of the plastic deformation shaping remains a very important research field of activity; the objective of proposing laws of behavior used in computer codes, essentially based on finite element is sufficiently to represent the real behavior of materials. Considering the nature of the materials used and the stresses they experience the behavior laws account for several requirements which make them increasingly complicated. Among these requirements, we cite in particular plastic anisotropy, the great transformations, the complexity and diversity of loads, etc. The complexity of these laws makes them more difficult to implement and in particular to identify: the classic tests are no longer sufficient for identification. The objective of this work is based on two essential points: Suggest a construction strategy, particularly of identifying laws elastoplastic behavior anisotropic operational for the numerical simulation of plastic deformation shaping processes with particular attention to sheet metal magnesium. Magnesium sheet metal manufacturing process involves rolling operation. In a cost-cutting goal, this operation now takes place cold, implying a very marked anisotropy of the material at the output of the mill

  3. Controlling microstructure and texture in magnesium alloy sheet by shear-based deformation processing

    Science.gov (United States)

    Sagapuram, Dinakar

    Application of lightweight Mg sheet is limited by its low workability, both in production of sheet (typically by multistep hot and cold-rolling) and forming of sheet into components. Large strain extrusion machining (LSEM), a constrained chip formation process, is used to create Mg alloy AZ31B sheet in a single deformation step. The deformation in LSEM is shown to be intense simple shear that is confined to a narrow zone, which results in significant deformation-induced heating up to ~ 200°C and reduces the need for pre-heating to realize continuous sheet forms. This study focuses on the texture and microstructure development in the sheet processed by LSEM. Interestingly, deep, highly twinned steady-state layer develops in the workpiece subsurface due to the compressive field ahead of the shear zone. The shear deformation, in conjunction with this pre-deformed twinned layer, results in tilted-basal textures in the sheet with basal planes tilted well away from the surface. These textures are significantly different from those in rolled sheet, where basal planes are nearly parallel to the surface. By controlling the strain path, the basal plane inclination from the surface could be varied in the range of 32-53°. B-fiber (basal plane parallel to LSEM shear plane), associated with basal slip, is the major texture component in the sheet. An additional minor C2-fiber component appears above 250°C due to the thermal activation of pyramidal slip. Together with these textures, microstructure ranges from severely cold-worked to (dynamically) recrystallized type, with the corresponding grain sizes varying from ultrafine- (~ 200 nm) to fine- (2 mum) grained. Small-scale limiting dome height (LDH) confirmed enhanced formability (~ 50% increase in LDH) of LSEM sheet over the conventional rolled sheet. Premature, twinning-driven shear fractures are observed in the rolled sheet with the basal texture. In contrast, LSEM sheet with a tilted-basal texture favorably oriented for

  4. Statistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.

    Science.gov (United States)

    Park, Jun-Ho; Ahn, Tae-Hong; Choi, Hyun-Sik; Chung, Jung-Man; Kim, Dong-Ik; Oh, Kyu Hwan; Han, Heung Nam

    2013-08-01

    Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrystallized grains could be distinguished from deformed ones by analyzing grain orientation spread. Split basal texture of ca. ±10-15° in the rolling direction was observed in the cold-rolled sample. Recrystallized grains had widely spread basal poles at nucleation stage; strong {0001} basal texture developed with grain growth during annealing.

  5. Tribology and Tool Wear of Hot Dip Galvanized Zinc Magnesium Alloys on Cold Rolled Steel Sheets

    Science.gov (United States)

    Raab, A. E.; Berger, E.; Freudenthaler, J.; Leomann, F.; Walch, C.

    2011-05-01

    Recently zinc based coatings on cold rolled steel with improved functionality in terms of forming and/or corrosion behaviour have been intensively investigated in the steel industry1,2,3. One of the most promising products are zinc magnesium alloys produced in hot dip galvanizing process. These coatings were already introduced in construction industry a few years ago1. With some modifications the improved properties of the coating are also interesting for automotive industry. In the present work the tribological potential of hot dip galvanized zinc magnesium coatings (HDG/ZM) produced at an industrial line under regular production, was studied in terms of sliding properties, adhesive and abrasive tool wear. First a short introduction into surface morphology of HDG/ZM will be given. For the tribological characterization of the material, which is the main topic of the contribution, different tests were performed on hot dip galvanised zinc magnesium material and results were compared with classic hot dip galvanized zinc coating (HDG/Z). The investigations are mainly based on the strip draw test which allows the determination of the friction coefficient directly by using a constant contact pressure. Deep drawing property was tested by forming model cups. The abrasive tool wear was tested using a standard test for material used in automotive industry. The adhesive tool wear was investigated by characterizing the coating material transferred to the tool in the strip draw test. All performed tests show an improved drawability of HDG/ZM compared to classical HDG/Z reference material. However the most promising difference between HDG/ZM and HDG/Z is that galling was found to be less for HDG/ZM than for HDG/Z. Therefore HDG/ZM is an interesting system not only with respect to corrosion protection but also in terms of tribology and provides clear advantages in formability.

  6. Research on Thermal Deep-drawing Technology of Magnesium Alloy(AZ31B) Sheets

    Institute of Scientific and Technical Information of China (English)

    Sfihong ZHANG; Kun ZHANG; Zhongtang WANG; Chuanfu YU; Yi XU; Qiang WANG

    2004-01-01

    Forming technology of Mg alloy (AZ31B) sheets can be investigated by thermal deep drawing experiments. In the experiments,the blank holder and die contacting with the blank were heated to the same temperature as the blank by using the heating facility. The circular blank heated in an oven is formed at a temperature range of 100~400℃ to obtain the optimum forming temperature range and the effects of major technical parameters on the workpiece quality. It is found that the blank is brittle at temperatures lower than 200℃. Temperatures higher than 400℃ are not suitable for forming of the sheets because of severe oxidation and wrinkling. AZ31B shows an excellent formability at temperatures from 300 to 350℃ and can be formed into a workpiece with good quality. When the blank holder force is 99 Kn, extruded sheets with a thickness of 1 mm can be formed into cups without wrinkling. Workpieces show strong anisotropic deformation behavior on the flanges.

  7. Influence of rolling parameters on dynamically recrystallized microstructures in AZ31 magnesium alloy sheets

    Directory of Open Access Journals (Sweden)

    Lili Guo

    2015-06-01

    Full Text Available Conventional rolling experiments via the embedded pin in rolling sheet method were carried out at different reduction rates, starting rolling temperatures, and rolling speeds, and the effects of rolling parameters (i.e., temperature, equivalent strain, and rolling time on dynamically recrystallized (DRX microstructures of AZ31 alloy during hot rolling were studied quantitatively. The temperature-strain dependence of the high-angle grain boundary fraction (HAGB% was examined through electron backscattered diffraction. Results showed that as-rolled microstructures with high HAGB% may be obtained under average rolling temperatures of 270–320 °C, equivalent strains higher than 0.8, and a rolling speed of 246 mm/s. These results may be related to the DRX kinetics and dynamic recovery which are controlled by deformation temperature and strain. HAGB% decreased with increasing rolling time (decreasing rolling speed, which is attributed to dynamic recovery, and the recrystallized grain size decreased as rolling time increased. However, further increases in rolling time increased average grain sizes but decreased mean subgrain sizes; these results are attributed to increases in the low-angle grain boundary (LAGB length per unit area with rolling time. LAGB formation was controlled by dynamic recovery, which consistently follows polygonization or formation of new subgrains inside larger grains; hence, average subgrain sizes decreased with the rolling time. The effect of dynamic recovery on HAGB and LAGB formation and their related mechanisms over a wide range of strains and temperatures were discussed in detail.

  8. Research Progress for Special Rolling Technology of Magnesium Alloy Sheet%镁合金板材特殊轧制技术的研究进展

    Institute of Scientific and Technical Information of China (English)

    魏琳俊; 杨寿智; 夏伟军; 邓朝晖; 刘灵

    2012-01-01

    分析了限制镁合金板材应用发展的关键技术瓶颈和内在根源,在对等径角轧制、异步轧制、累计叠轧和反复单向弯曲等镁合金板材特殊轧制技术的研究现状及其基本原理、特点和应用进行全面归纳总结的基础上,指出剪切变形在镁合金板材成形中具有重要意义,开发或采用特殊制备技术并实现板材轧制过程中的晶粒细化、孪晶控制和织构调整是促进镁合金板材应用发展最行之有效的方法之一。%The key technological bottlenecks and root causes for the development of the magnesium alloy sheet are analyzed. The fundamental principle, characteristics and applications of several special rolling technologies of magnesium alloy sheet, including equal channel angular rolling (ECAR), differential speed rolling, accumulative roll-bonding (ARB), repeated unidirectional bending (RUB) are well reviewed and summarized. It is point that shear deformation plays a pivotal role in magnesium alloy sheet forming process and one of the most effective way to promote the development of the magnesium alloy sheet is to develop or use special rolling technology, because the grain is refined, twin crystal is controlled and the texture is adjusted during rolling process.

  9. ZK60镁合金板材成形性能试验%Research on the formability of ZK60 magnesium alloy sheet

    Institute of Scientific and Technical Information of China (English)

    程文杰; 陈拂晓; 郭俊卿

    2012-01-01

    对ZK60镁合金板材在室温和高温条件下进行杯突试验.试验结果表明,室温下ZK60镁合金板材杯突值IE=4.5mm,在370℃条件下材料的杯突值IE=16.5mm,胀形高度增加了266.7%;ZK60镁合金板材高温胀形的破裂,是由冲头附近板材沿切向方向的裂纹扩展和沿厚度方向缩颈所产生的断裂造成.%ZK60 magnesium alloy possesses highest strength/weight ratio in all metal materials. Cupping testing method was carried out for ZK60 magnesium alloy sheet at elevated and room temperature. The test results show that the high temperature bulging rupture of ZK60 magnesium alloy sheet is due to the crack propagation of the sheet near the punch along the tangential direction and the necking along the thickness direction. At room temperature, the IE value of cupping test is about 4. 5mm. At elevated temperature, the IE value of the cupping test increases to 16. 5mm and the bulging height increases by 266. 7% comparing with that of room temperature. It illustrates that the increase of temperature will improve the formability of ZK60 magnesium alloy sheet which displays poor expanding and flanging formability at room temperature.

  10. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    Directory of Open Access Journals (Sweden)

    Berat Barıs BULDUM

    2013-01-01

    Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

  11. Drawability Studies of Magnesium Alloy Sheets at Elevated Temperature / Badania Tłoczności Blach Ze Stopów Magnezu W Podwyższonej Temperaturze

    Directory of Open Access Journals (Sweden)

    Hyrcza-Michalska M.

    2015-12-01

    Full Text Available The paper presents the results of a study of drawability of thin AZ31 magnesium alloy metal sheets. These studies are a continuation of experiences in presenting the characteristics of technological plasticity of strips made of magnesium alloy which have been cast between rolls in vertical and horizontal systems called ‘twin-roll casting’. In the context of previous experiments conducted at the Institute of Material Technology of the Silesian University of Technology in cooperation with the Technical University - Bergakademie Freiberg (Germany, drawability of these strips at elevated temperatures has been comprehensively defined while using forming limit curves. Due to low formability of magnesium alloys at ambient temperature, formability tests - including cup forming tests presented in this paper - have been carried out in heated dies at temperature range of 200°C to 350°C. A modern AutoGrid digital local strain analyzer has been used in the examinations and the method of image analysis of deformed coordination nets has been applied. Quantitative and qualitative impact of deformation temperature upon the drawability effects of AZ31 magnesium alloys products have been evaluated.

  12. Corrosion behavior of magnesium and magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    I.M.Baghni; WU Yin-shun(吴荫顺); LI Jiu-qing(李久青); ZHANG Wei(张巍)

    2004-01-01

    The automotive industry has crossed the threshold from using magnesium alloys in interior applications such as instrument panels and steering wheels to unprotected environment such as oil pan, cylinder head and wheels. The expanding territory of magnesium leads to new challenges: mainly environmental degradation of the alloys used and how they can be protected. The present critical review is aimed at understanding the corrosion behavior of magnesium and magnesium alloys in industrial and marine environments, and the effect of microstructure, additive elements and inhibitors on the corrosion mechanism.

  13. New developments in rapidly solidified magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.K. [Allied-Signal, Inc., Morristown, NJ (United States); Chang, C.F. [Allied-Signal, Inc., Morristown, NJ (United States); Raybould, D. [Allied-Signal, Inc., Morristown, NJ (United States); King, J.F. [Magnesium Elektron Ltd., Manchester (United Kingdom); Thistlethwaite, S. [Magnesium Elektron Ltd., Manchester (United Kingdom)

    1992-12-31

    In the present paper, we will examine the new developments in the rapidly solidified Mg-Al-Zn-Nd (EA55RS) alloy. We shall first briefly review the process scale-up currently employed for producing rapidly solidified magnesium alloys in large quantities, and then discuss the effect of billet size and processing parameters on the mechanical properties of various mill product forms such as extrusions and sheets. The superplastic behavior of EA55RS extrusions and rolled sheets are also discussed. Finally, some results on magnesium metal-matrix composites using rapidly solidified EA55RS matrix powders and SiC particulates are presented. (orig.)

  14. Incremental forming of free surface with magnesium alloy AZ31 sheet at warm temperatures

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The formability of AZ31 sheet begins to increase drastically at 150 ℃. The incremental forming technique was thus applied to AZ31 sheet at 150 ℃ to utilize the formability to its fullest capacity at the lowest possible temperature for forming applications. A surface scanning technique was used followed by the tool path generation to incrementally form an egg surface. After thorough examination of various tool paths, the surface was most successfully produced by forming an intermediate shape followed by a series of tool paths. Flexible scale stickers were devised to improve the accuracy in the measurement of grid deformation.

  15. Rolling of microalloyed magnesium sheets

    Energy Technology Data Exchange (ETDEWEB)

    Sotirov, N.; Riemelmoser, F.O.; Kuhlein, M.; Kettner, M. [ARC Leichmetallkompetenzzentrum GmbH, Ranshofen (Austria); Uggowitzer, P.J. [ETH Zurich, Zurich (Switzerland). Dept. of Materials, Laboratory of Metal Physics and Technology; Spencer, K. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Lab

    2007-07-01

    This paper described a rolling process for a micro-alloyed zinc-manganese (Zn-Ca-Ag-Mn) magnesium alloy. The micro-alloyed magnesium alloy L1 was investigated in order to achieve a finer grain structure and to avoid normal grain growth during rolling. Rolling parameters included billet temperature; rolls temperature and rolls radius; rolling speed; and lubrication. Standard tensile tests were conducted with the rolled alloy L1 flat specimens at room temperature with a test length of 50 mm and a test width of 12.5 mm. Specimens heat treated at 100 degrees C and 200 degrees C showed good balance of strength and elongation. Elongation increased with increasing heat treatment times. Results of the tests demonstrated that the Zn-Ca-Ag-Mn alloy L1 showed exceptionally high elongations to fracture at room temperatures. A pronounced work hardening regime was also observed. It was concluded that the grain structure of the L1 alloy was not influenced after heat treatments until temperatures reached 350 degrees C for 20 minutes. Significant grain coarsening occurred after preliminary heat treatments of 400 degrees C. 7 refs., 1 tab., 6 figs.

  16. Superplastic Deformation Behavior of Hot-rolled AZ31 Magnesium Alloy Sheet at Elevated Temperatures

    Institute of Scientific and Technical Information of China (English)

    ZHANG Kaifeng; YIN Deliang; WANG Guofeng; HAN Wenbo

    2006-01-01

    Uniaxial tensile tests were carried out in the temperature range of 250-450 ℃ and the strain rate range of 0.7×10-3-1.4×10-1s-1 to evaluate the superplasticity of AZ31 Mg alloy. The threshold stress which characterizes the difficulty for grain boundary sliding was calculated at various temperatures. The surface relieves of superplastically deformed specimens were observed by using a scanning electronic microscope (SEM). Results show that, at the temperature of 400 ℃ and strain rate of 0.7×10-3 s-1, the strain rate sensitivity exponent, i e, m value reaches 0.47 and the maximum elongation of 362.5% is achieved. Grain boundary sliding (GBS) is the primary deformation mechanism and characterized by a pronounced improvement in the homogeneity with increasing temperatures. A large number of filaments were formed at the end of deformation and intergranular cavities were produced with the necking and fracture of filaments. Finally, the model for the formation of intergranular cavities was proposed.

  17. Quasi Static and Dynamic Characterization of Equal Channel Angular Extrusion (ECAE) Processed and Rolled AZ31 Magnesium Alloy Sheet

    Science.gov (United States)

    2017-04-01

    results indicated that it is unlikely that Mg alloys will directly replace steel or aluminum as a monolithic armor material, it could be potentially...could be formed into thin sheets. Because of its low melting point and good castability, many components made from Mg can be produced by casting ...Unfortunately, such cast parts have poor mechanical properties, for example, low strength and ductility, and, therefore, cannot be used for many

  18. Hydrostatic extrusion of magnesium alloys

    NARCIS (Netherlands)

    Sillekens, W.H.; Bohlen, J.

    2012-01-01

    This chapter deals with the capabilities and limitations of the hydrostatic extrusion process for the manufacturing of magnesium alloy sections. Firstly, the process basics for the hydrostatic extrusion of materials in general and of magnesium in particular are introduced. Next, some recent research

  19. Microstructure, texture, and mechanical properties of friction stir spot welded rare-earth containing ZEK100 magnesium alloy sheets

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, R.I. [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL 35487 (United States); Jordon, J.B., E-mail: bjordon@eng.ua.edu [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL 35487 (United States); Rao, H.M. [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL 35487 (United States); Badarinarayan, H.; Yuan, Wei [Hitachi America Ltd., R and D Division, Automotive Products Research Laboratory, Farmington Hills, MI 48335 (United States); El Kadiri, Haitham [Department of Mechanical Engineering, Mississippi State University, Starkville, MS 39759 (United States); Allison, P.G. [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL 35487 (United States)

    2014-11-17

    The effect of friction stir spot welding process parameters on the microstructure, texture, and mechanical properties of ZEK100 (Mg–1.0 wt% Zn–0.5 wt% RE–0.5 wt% Zr) Mg alloy was investigated. Lap-shear joints were prepared using two different tool rotational speeds (1500 and 2250 rpm) and three different shoulder plunge depths (0.0, 0.2, 0.6 mm). Microstructure analysis revealed significant grain refinement in the stir zone, when compared to the base material. Electron backscatter diffraction analysis revealed a strong texture development in the keyhole periphery and adjacent regions despite the presence of RE-elements, however, no significant texture variation was observed within the process parameters. These results suggest that the ultimate failure of the weld is more attributed to macroscopic features such as the bond width and upper sheet thickness rather than texture development.

  20. 等温循环弯曲对镁合金板材组织及力学性能的影响%Microstructure and Mechanical Properties of Magnesium Alloy Sheet Processed by Isothermal Repeated Bending Technology

    Institute of Scientific and Technical Information of China (English)

    王忠堂; 马康; 梁海成

    2013-01-01

    Magnesium alloy AZ31 sheet was processed by isothermal repeated bending technology (IRBT) at different temperatures. Microstructure and texture as well as properties of magnesium alloy sheet were analyzed. The results indicate that the twinning crystal is the dominant deformation mechanism at 443 K and 483 K, and initial recrystallization grain appears near the twinning boundaries. With deformation temperature of 523 K, initial recrystallization is observed at grain boundaries. For initial magnesium alloy sheet, the elongation is 12. 4% and the texture intensity reaches 9. 8 at room temperature. When magnesium alloy AZ31 sheet was bended 3 passes at 483 K, the elongation reaches 17. 1% and the texture intensity is 5. 75 at room temperature.%对AZ31B镁合金板材在不同温度下进行了不同道次的等温循环弯曲试验,分析了镁合金板材微观组织和宏观织构的变化情况.结果表明,在变形温度为443 K和483 K时,主要由孪晶来协调变形,并且在孪晶带附近产生了最初的再结晶晶粒;在变形温度为523 K时,最初再结晶晶粒产生在晶界处.在变形温度为483 K循环弯曲3个道次的条件下,其室温伸长率达到17.1%,而原始AZ31B镁合金板材的室温伸长率为12.4%.其基面织构最大相对强度由9.80降到了5.75.

  1. Microstructure and texture evolution of AZ31 magnesium alloy during rolling

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The production of magnesium alloy sheets normally involves several processing stages including hot rolling, cold rolling and intermediate annealing. The microstructure and texture evolution of AZ31 magnesium alloy sheets in different processing states were investigated by optical microscopy and X-ray diffraction technique. It is found that the microstructure of hot-rolled sheets is dominated by recrystallized equiaxed grains, while that of cold-rolled sheets is dominated by deformation twins. With final annealing applied on the cold-rolled sheets, fine recrystallization grains are obtained and ductility of the samples is increased. It is also found that the texture of magnesium alloy sheets prefers the basal texture, and other compositions of texture are relatively weak. Moreover,final annealing does not significantly affect texture distribution. The results of this study provide useful guidelines for optimizing the processing of magnesium alloys.

  2. Grain size dependence of dynamic mechanical behavior of AZ31B magnesium alloy sheet under compressive shock loading

    Energy Technology Data Exchange (ETDEWEB)

    Asgari, H., E-mail: hamed.asgari@usask.ca [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Odeshi, A.G.; Szpunar, J.A. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon (Canada); Zeng, L.J.; Olsson, E. [Department of Applied Physics, Chalmers University of Technology, Göteborg (Sweden)

    2015-08-15

    The effects of grain size on the dynamic deformation behavior of rolled AZ31B alloy at high strain rates were investigated. Rolled AZ31B alloy samples with grain sizes of 6, 18 and 37 μm, were subjected to shock loading tests using Split Hopkinson Pressure Bar at room temperature and at a strain rate of 1100 s{sup −} {sup 1}. It was found that a double-peak basal texture formed in the shock loaded samples. The strength and ductility of the alloy under the high strain-rate compressive loading increased with decreasing grain size. However, twinning fraction and strain hardening rate were found to decrease with decreasing grain size. In addition, orientation imaging microscopy showed a higher contribution of double and contraction twins in the deformation process of the coarse-grained samples. Using transmission electron microscopy, pyramidal dislocations were detected in the shock loaded sample, proving the activation of pyramidal slip system under dynamic impact loading. - Highlights: • A double-peak basal texture developed in all shock loaded samples. • Both strength and ductility increased with decreasing grain size. • Twinning fraction and strain hardening rate decreased with decreasing grain size. • ‘g.b’ analysis confirmed the presence of dislocations in shock loaded alloy.

  3. On the Modeling of Plastic Deformation of Magnesium Alloys

    Science.gov (United States)

    Ertürk, S.; Steglich, D.; Bohlen, J.; Letzig, D.; Brocks, W.

    2007-05-01

    Magnesium alloys are promising materials due to their low density and therefore high specific strength. However, the industrial application is not well established so far, especially for wrought products such as sheets or profiles. Due to its hexagonal crystallographic structure, deformation mechanisms observed in magnesium alloys are rather different from those in face centered cubic metals such as aluminum alloys. This leads not only to a mechanical anisotropy, but also to a tension-compression asymmetry, i.e. unequal compressive and tensile yield strength. The resulting complexity in the yielding behavior of such materials cannot be captured by conventional models of J2 plasticity. Cazacu and Barlat, therefore, proposed a phenomenological yield potential which accounts for the respective phenomena by introducing the third invariant of the stress tensor. Simulations based on this model are performed with ABAQUS/Explicit and a user defined routine VUMAT for validating the respective implementation. The application aims at simulating the extrusion process of magnesium alloys.

  4. The developing strategy of Chinese magnesium and magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    ZUO; Tie-yong; DU; Wen-bo

    2005-01-01

    The status and developing strategy of Chinese magnesium industry are summarized in the present paper. The output and export of Chinese magnesium ingot have rapidly increased in the recent ten years, but the magnesium products with high value, such as the wrought magnesium alloys, and their applications are insufficient. Chinese magnesium industry should develop toward the direction of large scale, specialization and collectivization in the future. The enterprises should enhance the level of management and reinforce the international competing ability with the help of governmental policies.

  5. New development of anodizing process of magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    BAI Li-qun; LI Di

    2004-01-01

    Magnesium alloy, a kind of environment-friendly material with promising and excellent properties, is a good choice for a number of applications. The research and development of anodizing on magnesium alloys and its application situation are reviewed, and the anodizing development trend on magnesium alloys is summarized.

  6. A review on hot tearing of magnesium alloys

    Directory of Open Access Journals (Sweden)

    Jiangfeng Song

    2016-09-01

    Full Text Available Hot tearing is often a major casting defect in magnesium alloys and has a significant impact on the quality of their casting products. Hot tearing of magnesium alloys is a complex solidification phenomenon which is still not fully understood, it is of great importance to investigate the hot tearing behaviour of magnesium alloys. This review attempts to summarize the investigations on hot tearing of magnesium alloys over the past decades. The hot tearing criteria including recently developed Kou's criterion are summarized and compared. The numeric simulation and assessing methods of hot tearing, factors influencing hot tearing, and hot tearing susceptibility (HTS of magnesium alloys are discussed.

  7. REVIEW ON RESEARCH AND DEVELOPMENT OF MAGNESIUM ALLOYS

    Institute of Scientific and Technical Information of China (English)

    Z.Yaug; J.P.Li; J.X.Zhang; G.W.Lorimer; J.Robson

    2008-01-01

    The current research and development of magnesium alloys is summarized. Several aspects of magnesium alloys are described: cast Mg alloy, wrought Mg alloy, and novel processing. The subjects are discussed individually and recommendations for further study arc listed in the final section.

  8. A lightweight shape-memory magnesium alloy.

    Science.gov (United States)

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-22

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)-, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at -150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries.

  9. R-HPDC of magnesium alloys

    CSIR Research Space (South Africa)

    Curle, UA

    2013-01-01

    Full Text Available different magnesium alloys (AM50A, AM60B, AZ91D) in a first attempt. All as-cast microstructures are characterised more by rosette shaped globules of the primary-(Mg) phase together with Mg(sub17)Al(sub12) as evidence of nonequilibrium cooling rates. Surface...

  10. Properties of laser alloyed surface layers on magnesium base alloys

    Energy Technology Data Exchange (ETDEWEB)

    Galun, R.; Weisheit, A.; Mordike, B.L. (Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. fuer Werkstoffkunde und Werkstofftechnik)

    1998-01-01

    The investigations have shown that laser surface alloying is a promising process to improve the wear and corrosion properties of magnesium base alloys without affecting the initial bulk properties like the low density. With an alloying element combination of aluminium and nickel the wear rate in the scratch test was reduced by 90% compared to untreated pure magnesium. Additionally the corrosion resistance was improved by laser alloying with this element combination. Because of distortion or crack formation in the case of large area treatments, the laser alloying should be limited to the treatment of smaller areas. In the near future this process could be an interesting alternative to surface coating or to a partially reinforcement with ceramic fibres or particles. (orig.)

  11. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kudret KANDEMİR

    2003-01-01

    Full Text Available Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and applications in the automotive industry.

  12. Biomedical applications of magnesium alloys

    NARCIS (Netherlands)

    Sillekens, W.H.; Bormann, D.

    2012-01-01

    This chapter deals with the emerging field of biomedical applications for magnesium-based materials, envisioning degradable implants that dissolve in the human body after having cured a particular medical condition. After outlining the background of this interest, some major aspects concerning degra

  13. 基于Gurson模型的镁合金板材温热冲压成形研究%Thermal stamping formability of magnesium alloy sheet based on the Gurson model

    Institute of Scientific and Technical Information of China (English)

    王瑞泽; 陈章华; 臧勇

    2014-01-01

    在Gurson损伤模型的基础上,采用有限元数值模拟与温热冲压实验相结合的方法,对镁合金板材温热冲压成形过程中的材料损伤过程进行了预测。考虑了板材的塑性各向异性行为,通过用户自定义材料子程序VUMAT将损伤模型嵌入到有限元软件ABAQUS/Explicit中。采用单轴拉伸试验数据与有限元数值模拟结果进行迭代,确定了Gurson模型所需要的材料参数。使用ABAQUS模拟得到了镁合金板材温热冲压过程中微孔洞的演变及分布规律。通过扫描电子显微镜,对不同温度下的AZ31镁合金板材由孔洞增长和聚合引起的内部损伤演化进行了观察分析。研究结果表明,板材中微孔洞的分布与实验数据相吻合,说明本文所提出的方法可以应用于金属板材温热冲压成形性能预测。%Based on the Gurson damage model, the thermal stamping formability of AZ31 magnesium alloy sheet was predicted by employing finite element simulation and thermal stamping test. Taking the plastic anisotropic behavior of the AZ31 sheet into account, the Gurson damage model was implemented in the commercial finite element software ABAQUS/Explicit by using the user material sub-routine VUMAT. Parameters employed in the Gurson damage model were determined through uniaxial tensile test and numerical itera-tive computation. The evolvement and distribution of micro voids in the AZ31 sheet during thermal stamping were simulated by using ABAQUS. The internal damage evolution due to micro void growth and coalescence developed at different temperatures in the AZ31 sheet was observed by scanning electron microscopy. The predicted micro void distribution agrees well with experimental data. There-fore, this result indicates that the presented approach can be employed to predict the thermal stamping formability of metal sheet.

  14. Research on the diffusion bonding of superplastic magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    于彦东; 张凯锋; 蒋大鸣; 郑海荣; 王刚

    2002-01-01

    The elevated temperature tensile experiments have been carried out on the magnesium alloy and results indicate that the magnesium alloy has excellent superplastic property. Gleebe-1500 testing machine was used in the diffusion bonding experiment on the superplastic magnesium alloy. Then, the shear strength of the joints under different conditions is obtained through shear testing and the optimum processing parameters for the diffusion bonding are achieved. By metallurgical microscope and scanning electron microscope (SEM), it is revealed that the micromechanism of diffusion bonding is the slide of grain boundaries caused by the growth of grains and atom diffusion of the superplastic magnesium alloy.

  15. Microstructure and tensile properties of magnesium alloy modified by Si/Ca based refiner

    Institute of Scientific and Technical Information of China (English)

    DUAN Zhi-chao; SUN Yang-shan; WEI Yu; DU Wen-wen; XUE Feng; ZHU Tian-bai

    2005-01-01

    Microstructure and mechanical properties of pure magnesium and AZ31 alloy with Ca/Si based refiner addition were investigated. The results indicate that addition of Ca/Si based refiners to pure magnesium and AZ31 alloy results in remarkable microstructure refinement. With proper amount of refiner addition, the grain size in as cast ingots can be one order of magnitude lower than that without refiner addition. Small amount of refiner addition to AZ31 alloy increases both ultimate strength and yield strength significantly, while the ductility of the alloy with refiner addition is similar to that without refiner addition. Addition of refiner improves the deformability of AZ31 alloy and extruded or hot rolled specimens (rods or sheets) with refiner addition exhibit higher surface quality and mechanical properties than those without refiner addition.

  16. Twin-roll strip casting of magnesium alloys in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The development status of twin-roll strip casting for magnesium alloys in China was summarized as well as the new progress when several kinds of twin-roll strip casting technologies were developed and used.Horizontal twin-roll casting (HTRC) of magnesium alloys has attracted much attention and has been industrialized in China.Vertical twin roll casting(VTRC) of the magnesium alloys can reach a speed of higher than 30 m/min and its research and development are just beginning and exhibit exciting potential.By comparing the process characteristics of the two technologies,the process stability of HTRC for the magnesium alloys is better,and the casting speed and the cooling rate of VTRC for the magnesium alloys are higher.The quality of the products by the two technologies needs to be improved and further investigated.

  17. Novel Magnesium Alloys Developed for Biomedical Application: A Review

    Institute of Scientific and Technical Information of China (English)

    Nan Li; Yufeng Zheng

    2013-01-01

    There is an increasing interest in the development of magnesium alloys both for industrial and biomedical applications.Industrial interest in magnesium alloys is based on strong demand of weight reduction of transportation vehicles for better fuel efficiency,so higher strength,and better ductility and corrosion resistance are required.Nevertheless,biomedical magnesium alloys require appropriate mechanical properties,suitable degradation rate in physiological environment,and what is most important,biosafety to human body.Rather than simply apply commercial magnesium alloys to biomedical field,new alloys should be designed from the point of view of nutriology and toxicology.This article provides a review of state-of-the-art of magnesium alloy implants and devices for orthopedic,cardiovascular and tissue engineering applications.Advances in new alloy design,novel structure design and surface modification are overviewed.The factors that influence the corrosion behavior of magnesium alloys are discussed and the strategy in the future development of biomedical magnesium alloys is proposed.

  18. Ballistic Evaluation of Magnesium Alloy AZ31B

    Science.gov (United States)

    2007-04-01

    S. Burkins, and William A. Gooch Weapons and Materials Research Directorate, ARL Richard D. DeLorme Magnesium Elektron North America, Inc...ballistic properties. In order to fill this gap, the U.S. Army Research Laboratory (ARL) and Magnesium Elektron North America (MENA), Inc., conducted a...plate (H24 condition). The magnesium plate was alloyed, cast, rolled, thermally treated and tensile tested by Magnesium Elektron North America (MENA

  19. New technology for the production of magnesium strips and sheets

    Directory of Open Access Journals (Sweden)

    R. Kawalla

    2008-07-01

    Full Text Available A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm. The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.

  20. 镁合金薄带材轧制新进展%State-of-the-art Technology on Rolling of Magnesium Alloy Sheet

    Institute of Scientific and Technical Information of China (English)

    王祝堂

    2014-01-01

    对法塔亨特工程公司(FATA Hunter)新近开发的可逆式热轧机(安于美国橡树岭国家实验室)在试验过程中取得的成就与轧制生产线的构成作了较全面的介绍.这项试验由橡树岭国家实验室、法塔亨特公司、伊利可创镁业北美公司(Magnesium Elektron North America)共同实施,可实现镁合金薄带材的工业化生产,生产出有市场竞争力的、价格合理、可满足用户需要的镁及镁合金板带材.此生产线获得了美国2012年度100项创新优秀成就奖.

  1. Microstructure and kinetics of hot deformation WE43 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    GAO Jiacheng; WANG Qiang; WANG Yong; LI Wei; NIU Wenjuan

    2008-01-01

    The effect of compression on the rnicrostructures and flow behavior of WE43 magnesium alloy was investigated in this article.The relationship between flow stress and strain rate was discussed.According to the empirical formula ε = Aσn exp(-Q/RT),the value of heat activation of WFA3 magnesium alloys is 297.15 kJ/mol.A mechanism of deformation softening of WEA3 alloy in testing hot deformation was identified to be dynamic recrystallization.

  2. Corrosion of magnesium alloys in commercial engine coolants

    Energy Technology Data Exchange (ETDEWEB)

    Song, G.; StJohn, D.H. [CRC for Cast Metals Manufacturing (CAST), Division of Materials, School of Engineering, The University of Queensland, Brisbane, QLD 4072 (Australia)

    2005-01-01

    A number of magnesium alloys show promise as engine block materials. However, a critical issue for the automotive industry is corrosion of the engine block by the coolant and this could limit the use of magnesium engine blocks. This work assesses the corrosion performance of conventional magnesium alloy AZ91D and a recently developed engine block magnesium alloy AM-SC1 in several commercial coolants. Immersion testing, hydrogen evolution measurement, galvanic current monitoring and the standard ASTM D1384 test were employed to reveal the corrosion performance of the magnesium alloys subjected to the coolants. The results show that the tested commercial coolants are corrosive to the magnesium alloys in terms of general and galvanic corrosion. The two magnesium alloys exhibited slightly different corrosion resistance to the coolants with AZ91D being more corrosion resistant than AM-SC1. The corrosivity varied from coolant to coolant. Generally speaking, an organic-acid based long life coolant was less corrosive to the magnesium alloys than a traditional coolant. Among the studied commercial coolants, Toyota long life coolant appeared to be the most promising one. In addition, it was found that potassium fluoride effectively inhibited corrosion of the magnesium alloys in the studied commercial coolants. Both general and galvanic corrosion rates were significantly decreased by addition of KF, and there were no evident side effects on the other engine block materials, such as copper, solder, brass, steel and aluminium alloys, in terms of their corrosion performance. The ASTM D 1384 test further confirmed these results and suggested that Toyota long life coolant with 1%wt KF addition is a promising coolant for magnesium engine blocks. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  3. Laser welding of AZ61 magnesium-based alloys

    Institute of Scientific and Technical Information of China (English)

    Wang Hongying; Li Zhijun; Zhang Yihui

    2006-01-01

    Laser welding of AZ61 magnesium alloys was carried out asing a CO2 laser weldingexperimental system.The welding properties of AZ61 sheets with different thickness were investigated.The effect of processing parameters including laser power, welding speed and protection gas flow was researched.The results show that laser power and welding speed have large effect on the weld width and joint dimensions.Protection gas flow has relatively slight effect on the weld width.The property test of three typical joints indicates that microhardness and tensile strength in weld zone are higher than that of AZ61 base metal.Joints with good appearance and excellent mechanical properties can be produced using CO2 laser welding method.The microstructure with small grains in weld zone is believed to be responsible for the excellent mechanical properties of AZ61 joints.

  4. Variation of hydrogen level in magnesium alloy melt

    Institute of Scientific and Technical Information of China (English)

    XU Si-xiang; WU Shu-sen; MAO You-wu; AN Ping; GAO Pei-qing

    2006-01-01

    At present there is no commercial instrument available for measurement of hydrogen level in magnesium alloy melt in front of melting fumace. In this paper the equations of solubility of hydrogen in pure magnesium and magnesium alloy have been modified based on thermodynamic analysis. A fast measurement system for hydrogen content in magnesium melt was set up. With this instrument,measurement experiments have been carried out to determine hydrogen level in AZ91 melt. The hydrogen level varies from 6 cm3/100 g to 14 cm3/100 g at the temperature range between 650 ℃and 750 ℃.

  5. Microstructure and texture evolution in multi-pass warm rolled AZ31 magnesium alloy

    Directory of Open Access Journals (Sweden)

    Liu Di

    2015-01-01

    Full Text Available Electron Backscatter Diffraction (EBSD is employed to characterize the microstructure and texture established during the process of warm rolled AZ31 magnesium alloy sheets. The grain size was refined from 17.4 μm to 3.8 μm after 4 pass rolling. Texture of as-rolled sheets was expressed by (0002 basal texture, and the texture intensity was increased with the rolling pass increasing. The mechanical properties of as-rolled sheets were greatly improved by warm rolling.

  6. CO2 laser welding of magnesium alloys

    Science.gov (United States)

    Dhahri, Mohammed; Masse, Jean Eric; Mathieu, J. F.; Barreau, Gerard; Autric, Michel L.

    2000-02-01

    Metallic alloys with a low mass density can be considered to be basic materials in aeronautic and automotive industry. Magnesium alloys have better properties than aluminum alloys in respect of their low density and high resistance to traction. The main problems of magnesium alloy welding are the inflammability, the crack formation and the appearance of porosity during the solidification. The laser tool is efficient to overcome the difficulties of manufacturing by conventional processing. Besides, the laser processing mainly using shielding gases allows an effective protection of the metal against the action of oxygen and a small heat affected zone. In this paper, we present experimental results about 5 kW CO2 laser welding of 4 mm-thick magnesium alloy plates provided by Eurocopter France. The focused laser beam has about 0.15 mm of diameter. We have investigated the following sample: WE43, alloy recommended in aeronautic and space applications, is constituted with Mg, Y, Zr, rare earth. More ductile, it can be used at high temperatures until 250 degrees Celsius for times longer than 5000 hours without effects on its mechanical properties. A sample of RZ5 (French Norm: GZ4TR, United States Norm ZE41) is composed of Mg, Zn, Zr, La, rare earth. This alloy has excellent properties of foundry and it allows to the realization of components with complex form. Also, it has a good resistance and important properties of tightness. The parameters of the process were optimized in the following fields: laser power: 2 to 5 kW, welding speed: 1 to 4.5 m/min, focal position: -3 mm to +3 mm below or on the top of the metal surface, shielding gas: helium with a flow of 10 to 60 l/min at 4 bars. Metallurgical analyses and mechanical control are made (macroscopic structure, microscopic structure, interpretations of the structures and localization of possible defects, analyse phases, chemical composition, hardness, tensile test etc.) to understand the parameters influence of welding

  7. Magnesium-based biodegradable alloys: Degradation, application, and alloying elements.

    Science.gov (United States)

    Pogorielov, Maksym; Husak, Eugenia; Solodivnik, Alexandr; Zhdanov, Sergii

    2017-03-01

    In recent years, the paradigm about the metal with improved corrosion resistance for application in surgery and orthopedy was broken. The new class of biodegradable metal emerges as an alternative for biomedical implants. These metals corrode gradually with an appropriate host response and release of corrosion products. And it is absolutely necessary to use essential metals metabolized by hosting organism with local and general nontoxic effect. Magnesium serves this aim best; it plays the essential role in body metabolism and should be completely excreted within a few days after degradation. This review summarizes data from Mg discovery and its first experimental and clinical application of modern concept of Mg alloy development. We focused on biodegradable metal application in general surgery and orthopedic practice and showed the advantages and disadvantages Mg alloys offer. We focused on methods of in vitro and in vivo investigation of degradable Mg alloys and correlation between these methods. Based on the observed data, a better way for new alloy pre-clinical investigation is suggested. This review analyzes possible alloying elements that improve corrosion rate, mechanical properties, and gives the appropriate host response.

  8. Effective and Environmentally Friendly Nickel Coating on the Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    Ivana Škugor Rončević

    2016-12-01

    Full Text Available The low density and good mechanical properties make magnesium and its alloys attractive construction materials in the electronics, automotive, and aerospace industry, together with application in medicine due to their biocompatibility. Magnesium AZ91D alloy is an alloy with a high content of aluminum, whose mechanical properties overshadow the low corrosion resistance caused by the composition of the alloy and the existence of two phases: α magnesium matrix and β magnesium aluminum intermetallic compound. To improve the corrosion resistance, it is necessary to find an effective protection method for the alloy surface. Knowing and predicting electrochemical processes is an essential for the design and optimization of protective coatings on magnesium and its alloys. In this work, the formations of nickel protective coatings on the magnesium AZ91D alloy surface by electrodeposition and chemical deposition, are presented. For this purpose, environmentally friendly electrolytes were used. The corrosion resistance of the protected alloy was determined in chloride medium using appropriate electrochemical techniques. Characterization of the surface was performed with highly sophisticated surface-analytical methods.

  9. Anisotropic Damage and Failure Analysis of Magnesium Alloy Sheet Thermal Stamping%镁合金板材温热冲压过程的各向异性损伤与失效分析

    Institute of Scientific and Technical Information of China (English)

    蒋成钢; 陈章华; 臧勇

    2013-01-01

    以连续损伤力学理论为基础,采用有限元数值模拟与试验结果进行对比的方法对镁合金板材的温热冲压成形中材料的损伤破坏情况进行预测.通过将各向异性屈服准则与各向异性损伤理论编入商业有限元软件ABAQUS的用户材料子程序VUMAT,模拟得到镁合金板材冲压成形过程中损伤量的演化规律.以冲压手机壳为例,针对板材的特性,提出将各向异性损伤张量转化为壳单元局部坐标系内损伤矢量的方法,有效表达不同区域失效情况.数值模拟结果表明,板材在不同温度下预测的断裂与失效结果与实际板材冲压试验的结果一致.因此,采用的各向异性损伤计算方法可以有效预测冲压过程中镁合金板材因各向异性损伤导致断裂失效的现象.%Based on the frame work of the continuum damage mechanics,the prediction of damage evolution in a thermal stamping process of magnesium alloy sheet has been carried out by means of the finite element simulation,and the numerical results have been compared with the related experimental data.An anisotropic yield function for cold rolling sheet metals and an anisotropic damage theory are implemented into the ABAQUS user material subroutine VUMAT to predict the evolution of damage in the mentioned process.Taking a thermal stamping process of a phone shell for example,under the different working temperature,the overall anisotropic damage process from crack initiation to final propagation in local area of workpiece is proposed.Numerical results show that the prediction both of the site of crack initiation and the orientation of crack propagation are consistent with the data recorded in thermal stamping tests.It may be concluded that the proposed anisotropic damage model and the corresponding anisotropic yield function can be effectively incorporated into the finite element method(FEM) user material subroutine to predict the phenomenon of cracking during thermal

  10. Purifying effect of new flux on magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    高洪涛; 吴国华; 丁文江; 朱燕萍

    2004-01-01

    A new flux which can remove both Fe and non-metallic inclusions in magnesium alloy was introduced.The Fe content of the magnesium alloy can be decreased greatly from 0. 062% to lower than 0. 005% (degree of AZ91D) after being purified by this new flux. The optimum addition of B2O3 in the flux is 0. 58 % by Gaussian Curve Fitting. Corrosion rate was measured after the specimen being immersed in 5 % NaCl solution for 3 d. The resuits show that the corrosion rate of the magnesium alloy after purification by the new flux is only 0.3 mg · cm-2 ·d-1. On the other hand, non-metallic inclusions in the magnesium alloy decrease with increasing addition of JDMJ in the new flux. Average volume fraction of the non-metallic inclusions in the magnesium alloy decreases from 1.52 % to 1.08%, which leads to improvement in the mechanical properties of the magnesium alloy by 30%. The mechanisms of Fe reduction and non-metallic inclusion-removing in magnesium melt by purification with the new flux were also revealed.

  11. New anodizing process for magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    LUO Sheng-lian; DAI Lei; ZHOU Hai-hui; CHAI Li-yuan; KUANG Ya-fei

    2006-01-01

    Compact anodic films with high hardness and good corrosion resistance on magnesium alloys were prepared by a new constant voltage and arc-free anodizing process. The effects of anodizing parameters such as applied voltage and electrolyte temperature on the peak current density and the thickness of films were investigated. In addition, the morphologies and corrosion resistance of films were investigated by scanning electron microscopy and potentiodynamic polarization, respectively. The results show that the higher the applied voltage, the higher the peak current density and the thicker the films. However, too high applied voltage may result in breakdown of films and intense sparking which may deteriorate the properties of the anodic films and bring about unsafety. The new anodizing process can be applied in a wide range of temperature. The new anodic films have numbers of pores with the diameter of 0.5 - 5.0 μm which do not transverse the entire film.

  12. A novel electroless silver depositing method for magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    ZHAO Hui; CUI Jian-zhong

    2006-01-01

    Depositing silver on magnesium alloy by both electroless plating and organic coatings was studied. The organic coating was made by immersing samples in organosilicon heat-resisting varnish. In this method the organic coating acts as interlayer between the substrate and silver film. When the reaction starts, silver deposits directly on the interlayer. X-ray diffraction and SEM analysis were used to determine the composition and morphology of the interlayer and silver film. The potentiodynamic polarization curves for corrosion studies of coated magnesium alloys were performed in a corrosive environment of 3.5% NaCl(mass fraction) at neutral pH (6.9). The results indicate that compared with the substrate, the corrosion resistance of coated magnesium alloys increases greatly. Moreover, the method proposed in this work is environmentally friendly, non-toxic chemicals were used. In addition, it provides a new concept for the corrosion inhibition of magnesium alloys.

  13. Effects of segregation of primary alloying elements on the creep response in magnesium alloys

    DEFF Research Database (Denmark)

    Huang, Y.D.; Dieringa, H.; Hort, N.

    2008-01-01

    The segregation of primary alloying elements deteriorates the high temperature creep resistance of magnesium alloys. Annealing at high temperatures alleviating their segregations can improve the creep resistance. Present investigation on the effect of segregation of primary alloying elements...... on the creep response may provide some useful information about how to improve the creep resistance of magnesium alloys in the future. (c) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved....

  14. Casting Porosity-Free Grain Refined Magnesium Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Schwam, David [Case Western Reserve University

    2013-08-12

    The objective of this project was to identify the root causes for micro-porosity in magnesium alloy castings and recommend remedies that can be implemented in production. The findings confirm the key role played by utilizing optimal gating and risering practices in minimizing porosity in magnesium castings. 

  15. Mechanical properties and potential applications of magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    I.M.Baghni; WU Yin-shun(吴荫顺); LI Jiu-qing(李久青); DU Cui-wei(杜翠薇); ZHANG Wei(张巍)

    2003-01-01

    Magnesium alloys,having high specific strength,with a density only 2/3 of that of aluminum and 1/4 of carbon steels,have become ideal materials for low mass applications such as automobiles and electronic devices.It was dealt with the state of the art in developing cost effective,low mass,high ductility and high creep resistance magnesium alloys that are suitable for structures and power train applications.

  16. The role of magnesium in the electrochemical behaviour of 5XXX aluminium-magnesium alloys

    NARCIS (Netherlands)

    Flores Ramirez, J.R.

    2006-01-01

    An investigation concerning the effects of magnesium on the intergranular corrosion susceptibility of AA5XXX aluminium alloys was carried out. In the present work, magnesium is found to be highly mobile in the bulk metal as well as in the aluminium oxide. This mobility is also found to be dependent

  17. Research of Plasma Spraying Process on Aluminum-Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    Patricija Kavaliauskaitė

    2016-04-01

    Full Text Available The article examines plasma sprayed 95Ni-5Al coatings on alu-minum-magnesium (Mg ≈ 2,6‒3,6 % alloy substrate. Alumi-num-magnesium samples prior spraying were prepared with mechanical treatment (blasting with Al2O3. 95Ni-5Al coatings on aluminum-magnesium alloys were sprayed with different parameters of process and coating‘s thickness, porosity, micro-hardness and microstructure were evaluated. Also numerical simulations in electric and magnetic phenomena of plasma spray-ing were carried out.

  18. Effect of Pre-treatment on the Microstructural Homogeneity and Mechanical Properties of Magnesium Alloy Sheets Produced by High Strain Rate Rolling%预处理对高应变速率轧制镁合金板材组织均匀性和力学性能的影响

    Institute of Scientific and Technical Information of China (English)

    严红革; 田津; 朱素琴; 陈吉华; 苏斌; 吴远志

    2011-01-01

    Magnesium sheets prepared by traditional plastic processing technologies always exhibit undesirable mechanical properties, which is inefficient and costly for commercial application. High strain rate rolling (HSRR) was operated on AZ31 magnesium alloy. The microstructure and mechanical properties of the HSRRed sheets pre-treated in two different ways were investigated. The results indicated that HSRR was an effective method to produce magnesium alloy sheets characteristic of fine grains and high comprehensive mechanical properties. The pre-strain plus homogenization pre-treatment could significantly improve the microstructural homogeneity of the high strain rate rolled sheet, in which the fine grains were distributed very homogeneously and the average grain size was 2. 3 μm. The ductility of the sheet was enhanced due to the improved microstructural homogeneity, and the elongation at room temperature was up to 28%.%传统的镁合金板材加工技术存在生产效率低、成本偏高和成形性能不够理想等局限.本论文采用高应变速率轧制对AZ31镁合金进行轧制,对比研究了两种预处理方法对板材组织性能的影响.结果表明,高应变速率轧制是获得具有细小晶粒组织和良好综合力学性能的镁合金板材的有效手段.经过预变形+均匀化的预处理,高应变速率轧制板材的组织均匀性得到很大的提高,终轧板材内分布着极均匀的细小晶粒组织,其平均晶粒尺寸为2.3μm.由于组织均匀性的提高,板材塑性得到进一步提高,其室温伸长率可达28%.

  19. Structure evolution of AZ61 magnesium alloy in SIMA process

    Institute of Scientific and Technical Information of China (English)

    YAN Hong; ZHANG Fa-yun; JIE Xiao-ping

    2005-01-01

    The effect of prior compressive deformation, isothermal temperature and holding time on the structure of AZ61 magnesium alloy fabricated by strain-induced melt activation(SIMA) processing was investigated. The specimens were subjected under deformation ratios of 0%, 22% and 40% and various heat treatment time and temperature regions. The results indicate that the ideal technological parameters of semi-solid AZ61 alloy produced with non-dendrites are recommended as 22% (prior compressive deformation), 595 ℃ (heat treatment temperature) and 40 min(time). The as-cast AZ61 magnesium alloy isn't fit for semi-solid forming.

  20. FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS

    Directory of Open Access Journals (Sweden)

    Emil Spišák

    2016-12-01

    Full Text Available In this contribution there have been evaluated properties of four types of sheets made from aluminium alloys. In the case of each of the examined sheets there has been checked its shearing ability via the influence of punch-die clearance change on the quality of blanking edge. Quality of blanking edge is characterized by a ratio of plastic zone height to the total thickness of the sheared material. Formability during the drawing process was measured with earring test. Results are presented by the earring coefficient (unequal height of the cups.

  1. Precision forging technologies for magnesium alloy bracket and wheel

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Fundamental investigations on precision forging technology of magnesium alloys were studied. As-cast billet prestraining and a new concept of hollow billet were proposed in order to reduce the maximum forming load. A scheme of isothermal forming and the use of combined female dies were adopted, which can improve the die filling capacity and ensure the manufacture of high quality forgings. By means of the developed technique, AZ80 alloy wheel and AZ31 alloy bracket were produced successfully at suitable process parameters and applied in the automotive industries. The results show that the hot compression of AZ80 magnesium alloy has the peak flow stresses of pre-strained alloy with finer grain, which are lower by 20% than those of as-cast alloy under the same deformation conditions. The forming load is related to contact area and average positive stress on interface during forging process.

  2. Texture and microstructure development during hot deformation of ME20 magnesium alloy: Experiments and simulations

    Energy Technology Data Exchange (ETDEWEB)

    Li, X. [Institut fuer Metallkunde und Metallphysik, RWTH-Aachen University, 52056 Aachen (Germany); Al-Samman, T., E-mail: alsamman@imm.rwth-aachen.de [Institut fuer Metallkunde und Metallphysik, RWTH-Aachen University, 52056 Aachen (Germany); Mu, S.; Gottstein, G. [Institut fuer Metallkunde und Metallphysik, RWTH-Aachen University, 52056 Aachen (Germany)

    2011-10-15

    Highlights: {yields} Second phase precipitates in ME20 hindered activation of tensile twinning at 300 deg. C. {yields} New off-basal sheet texture during c-axis compression at low Z conditions. {yields} Ce amplifies the role of pyramidal -slip over prismatic slip at 0.3T{sub m}. {yields} Prismatic slip becomes equally important to deformation at 0.6T{sub m}. {yields} Accurate texture predictions using a cluster-type Taylor model with grain interaction. - Abstract: The influence of deformation conditions and starting texture on the microstructure and texture evolution during hot deformation of a commercial rare earth (RE)-containing magnesium alloy sheet ME20 was investigated and compared with a conventional Mg sheet alloy AZ31. For all the investigated conditions, the two alloys revealed obvious distinctions in the flow behavior and the development of texture and microstructure, which was primarily attributed to the different chemistry of the two alloys. The presence of precipitates in the fine microstructure of the ME20 sheet considerably increased the recrystallization temperature and suppressed tensile twinning. This gave rise to an uncommon Mg texture development during deformation. Texture simulation using an advanced cluster-type Taylor approach with consideration of grain interaction was employed to correlate the unique texture development in the ME20 alloy with the activation scenarios of different deformation modes.

  3. Research progress of aluminum alloy automotive sheet and application technology

    Institute of Scientific and Technical Information of China (English)

    Ma Mingtu; You Jianghai; Lu Hongzhou; Wang Zhiwen

    2012-01-01

    Pretrcatment technology is deeply discussed to explain its importance in guaranteeing properties and form- ability of aluminum alloy automotive sheet. Some typical applications of aluminum alloy automotive sheet to automotive industry are listed. Based on the author's knowledge and recognition and research progress presently, the important re- search contents about aluminum alloy automotive sheet are emphasized. Reducing cost and price of sheet and going deeply into application research are the main work for expending the application of aluminum alloy automotive sheet in the automobile.

  4. Biodegradation of Secondary Phase Particles in Magnesium Alloys: A Critical Review

    Energy Technology Data Exchange (ETDEWEB)

    Kannan, M. Bobby [James Cook University, Townsville (Australia)

    2016-04-15

    Magnesium alloys have been extensively studied in recent years for potential biodegradable implant applications. A great deal of work has been done on the evaluation of the corrosion behaviour of magnesium alloys under in vitro and in vivo conditions. However, magnesium alloys, in general, contain secondary phase particles distributed in the matrix and/or along the grain boundaries. Owing to their difference in chemistry in comparison with magnesium matrix, these particles may exhibit different corrosion behaviour. It is essential to understand the corrosion behaviour of secondary phase particles in magnesium alloys in physiological conditions for implant applications. This paper critically reviews the biodegradation behaviour of secondary phase particles in magnesium alloys.

  5. Laser surface treatment of magnesium alloys with aluminium oxide powder

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2009-11-01

    Full Text Available Purpose: The aim of this paper was to improve the magnesium cast alloys surface layer by laser surface treatment and to determine the laser treatment parameters.Design/methodology/approach: The laser treatment of magnesium alloys with alloying Al2O3 powder of the particle about 80μm was carried out using a high power diode laser (HPDL. The resulting microstructure in the modified surface layer was examined using scanning electron microscopy. Phase composition was determined by the X-ray diffraction method using the XPert device. The measurements of microhardness of the modified surface layer were also studied.Findings: The alloyed region has a fine microstructure with hard carbide particles. Microhardness of laser surface alloyed layer was significantly improved as compared to an alloy without laser treatment.Research limitations/implications: The investigations were conducted for cast magnesium alloys MCMgAl12Zn1, MCMgAl9Zn1, MCMgAl6Zn1, MCMgAl3Zn1 and Al2O3 powder of the particle size about 80 μm. One has used laser power in the range from 1.2to 2.0 kW.Practical implications: The results obtained in this investigation were promising comparing with the other conventional processes. High Power Diode Laser can be used as an economical substitute of Nd: YAG and CO2 to improve the surface magnesium alloy by feeding the carbide particles.Originality/value: The value of this paper is to define the influence of laser treatment parameters on quality, microstructure and microhardness of magnesium cast alloys surface layer.

  6. Deformation behavior and microstructure evolution of wrought magnesium alloys

    Science.gov (United States)

    Wang, Shouren; Song, Linghui; Kang, Sukbong; Cho, Jaehyung; Wang, Yingzi

    2013-05-01

    There are many researches on the deformation behavior of wrought magnesium alloys, such as AZ31, AZ80, AZ91, and ZK60 magnesium alloys at different temperatures and strain rates, but few of them focuses on the deformation behavior of AZ41M and ZK60M alloys, especially under the twin-roll casting (TRC) state. Meanwhile, the existing researches only focus on the grain refinement law of the magnesium alloys under deformation conditions, the deformation mechanism has not been revealed yet. The hot compression behavior of AZ41M and ZK60M magnesium alloys under the temperature and strain rate ranges of 250-400 °C and 0.001-1 s-1 are studied by thermal simulation methods using Gleeble 1500 machine and virtual simulation using finite element analysis software. Simulation results show that sine hyperbolic law is the most suitable flow stress model for wider deformation conditions. The most reasonable selected deformation conditions of ZK60M alloy is 350 °C/0.1 s-1 for TRC and 350 °C/1 s-1 for conventional casting (CC), while AZ41M alloy is 300 °C/0.01 s-1 for TRC and 350 °C/0.1 s-1 for CC. Deformation behavior and dynamic recrystallization (DRX) mechanism of them are analyzed at the same deformation conditions. The microstructures of AZ41M and ZK60M alloys are observed at different deformed conditions by optical microscopy (OM) and electron back scatter diffraction (EBSD) and it reveals the flow behavior and deformation mechanism of them. Working harden and work soften contribute to the activation of basal, non-basal slip systems which promote DRX. The proposed research reveals the deformation behavior and mechanism of the AZ41M and ZK 60M magnesium alloys and concludes their optimized deformation parameters and processes and provides a theory basis for their manufacturing and application.

  7. Microstructure and mechanical properties of friction stir welding of AZ31B magnesium alloy added with cerium

    Institute of Scientific and Technical Information of China (English)

    于思荣; 陈显君; 黄志求; 刘耀辉

    2010-01-01

    The AZ31B magnesium alloy sheet added with 0.5 wt.% Ce was welded with friction stir welding(FSW).The microstructures and mechanical properties of the welded joint were investigated.The results showed that the microstructures in the weld nugget zone were uniform and with small equiaxed grains.The grains in the heat-affected zone and the thermo-mechanical affected zone were coarser than those in the base metal zone and the weld nugget zone.The ultimate tensile strength of AZ31B magnesium alloy added with 0.5...

  8. Deformation behaviour and microstructure development of magnesium AZ 31 alloy during hot and semi-hot deformation

    Energy Technology Data Exchange (ETDEWEB)

    Kawalla, R.; Stolnikov, A. [Institut fuer Metallformung, TU Bergakademie Freiberg, Bernhard-von-Cotta-Str. 4, 09596 Freiberg (Germany)

    2004-07-01

    Deformation properties and microstructure development between 20 and 450 C were investigated for Magnesium AZ31 alloy. It was found that this alloy softens preferably by dynamic recrystallisation. This process starts at suitable deformation conditions above 150 C. However, the temperature region above 250 C is more interesting for the production process the semi-finished products. The recrystallised grain size depends heavily on the deformation temperature. A grain size with a mean diameter smaller than 10 {mu}m can be created below 300 C. For further processing of Magnesium sheets, temperatures above 100 C are suitable, but temperatures above 300 C are responsible for superplasticity. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  9. Preliminary study of biodegradation of AZ31B magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    REN Yibin; HUANG Jingjing; ZHANG Bingchun; YANG Ke

    2007-01-01

    Magnesium alloys are potential to be developed as a new type of biodegradable implant material by use of their active corrosion behavior.Both in vitro and in vivo biodegradation properties of an AZ31B magnesium alloy were investigated in this work.The results showed that AZ31B alloy has a proper degradation rate and much lower hydrogen release in Hank's solution,with a degradation rate of about 0.3 mm/year and hydrogen release below 0.15mL/cm2.The animal implantation test showed that the AZ31B alloy could slowly biodegrade in femur of the rabbit and form calcium phosphate around the alloy sample,with the Ca/P ratio close to the natural bone.

  10. Behavior of Stress Corrosion Cracking in a Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    SONG Renguo; YANG Fanger; BLAWERT Carsten; DIETZEL Wolfgang

    2009-01-01

    Slow strain rate testing (SSRT) was employed to study the stress corrosion cracking (SCC) behavior of ZE41 magnesium alloy in 0.01 M NaCl solution. Smooth tensile specimens with different thicknesses were strained dynamically in both longitudinal and transverse direction under permanent immersions at a strain rate of 10-6 s-1. It is found that ZE41 magnesium alloy is susceptible to SCC in 0.01 M NaCl solution. The SCC susceptibility of the thinner specimen is lower than that of the thicker specimen. Also, the longitudinal specimens are slightly more susceptible to SCC than the transverse specimens. The SCC mechanism of magnesium alloy is attributed to the combination of anodic dissolution with hydrogen embrittlement.

  11. MICROSTRUCTURAL STUDIES OF FRICTION STIR WELDED AZ31 MAGNESIUM ALLOY

    Institute of Scientific and Technical Information of China (English)

    H.Zhang; S.B.Lin; L.Wu; J.C.Feng

    2004-01-01

    Friction stir welding achieves the weld in solid phase by locally introducing frictional heating and plastic flow arising from rotation of the welding tool, which results in changes in the local microstructure of magnesium alloy. The purpose in the paper is to study the microstructures of friction stir welded AZ3I magnesium alloy. Residual microstructures,including dynamic re-crystallization zone and nugget structures have been systematically investigated utilizing optical microscopy (OM), scanning electric microscopy (SEM),transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and micro-hardness. AZ31 magnesium alloy has been successfully friction stir welded and exhibits the variations of microstructure including dynamically recrystallized,equaxied grains in the weld nugget. Residual hardness in the nugget was found slightly lower than the parent but not too obvious.

  12. Influence of Magnesium Alloy Degradation on Undifferentiated Human Cells.

    Directory of Open Access Journals (Sweden)

    Francesca Cecchinato

    Full Text Available Magnesium alloys are of particular interest in medical science since they provide compatible mechanical properties with those of the cortical bone and, depending on the alloying elements, they have the capability to tailor the degradation rate in physiological conditions, providing alternative bioresorbable materials for bone applications. The present study investigates the in vitro short-term response of human undifferentiated cells on three magnesium alloys and high-purity magnesium (Mg.The degradation parameters of magnesium-silver (Mg2Ag, magnesium-gadolinium (Mg10Gd and magnesium-rare-earth (Mg4Y3RE alloys were analysed after 1, 2, and 3 days of incubation in cell culture medium under cell culture condition. Changes in cell viability and cell adhesion were evaluated by culturing human umbilical cord perivascular cells on corroded Mg materials to examine how the degradation influences the cellular development.The pH and osmolality of the medium increased with increasing degradation rate and it was found to be most pronounced for Mg4Y3RE alloy. The biological observations showed that HUCPV exhibited a more homogeneous cell growth on Mg alloys compared to high-purity Mg, where they showed a clustered morphology. Moreover, cells exhibited a slightly higher density on Mg2Ag and Mg10Gd in comparison to Mg4Y3RE, due to the lower alkalinisation and osmolality of the incubation medium. However, cells grown on Mg10Gd and Mg4Y3RE generated more developed and healthy cellular structures that allowed them to better adhere to the surface. This can be attributable to a more stable and homogeneous degradation of the outer surface with respect to the incubation time.

  13. Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review

    Directory of Open Access Journals (Sweden)

    Vyasaraj Manakari

    2016-12-01

    Full Text Available Magnesium-based materials are used primarily in developing lightweight structures owing to their lower density. Further, being biocompatible they offer potential for use as bioresorbable materials for degradable bone replacement implants. The design and manufacture of complex shaped components made of magnesium with good quality are in high demand in the automotive, aerospace, and biomedical areas. Selective laser melting (SLM is becoming a powerful additive manufacturing technology, enabling the manufacture of customized, complex metallic designs. This article reviews the recent progress in the SLM of magnesium based materials. Effects of SLM process parameters and powder properties on the processing and densification of the magnesium alloys are discussed in detail. The microstructure and metallurgical defects encountered in the SLM processed parts are described. Applications of SLM for potential biomedical applications in magnesium alloys are also addressed. Finally, the paper summarizes the findings from this review together with some proposed future challenges for advancing the knowledge in the SLM processing of magnesium alloy powders.

  14. Mechanical Properties and Microstructure of AZ31 Magnesium Alloy Tubes

    Science.gov (United States)

    Luo, Alan A.; Sachdev, Anil K.

    Magnesium alloys are increasingly being used in automotive industry for weight reduction and fuel economy improvement. Extruded tubular sections provide further opportunities in mass-efficient designs of automotive structural and interior applications. In this paper, microstructural evaluation indicates that twinning is the predominant deformation mechanism for magnesium alloys at room and moderate temperatures. Dynamic recrystallization is observed at temperatures as low as 150°C, leading to the formation of fine grains as a "necklace" at prior grain boundaries. These new grains cause strain localization and instability due to a loss in strain hardening, and result in failure by cavitation.

  15. In vitro and in vivo studies on biodegradable magnesium alloy

    Directory of Open Access Journals (Sweden)

    Lida Hou

    2014-10-01

    Full Text Available The microstructure, mechanical property, electrochemical behavior and biocompatibility of magnesium alloy (BioDe MSM™ were studied in the present work. The experimental results demonstrated that grain refining induced by extrusion improves the alloy strength significantly from 162 MPa for the as-cast alloy to 241 MPa for the as-extruded one. The anticorrosion properties of the as-extruded alloy also increased. Furthermore, the hemolysis ratio was decreased from 4.7% for the as-cast alloy to 2.9% for the as-extruded one, both below 5%. BioDe MSM™ alloy shows good biocompatibility after being implanted into the dorsal muscle and the femoral shaft of the New Zealand rabbit, respectively, and there are no abnormalities after short-term implantation. In vivo observation indicated that the corrosion rate of this alloy varies with different implantation positions, with higher degradation rate in the femur than in the muscle.

  16. In vitro and in vivo studies on biodegradable magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    Lida Hou; Zhen Li; Yu Pan; Li Du; Xinlin Li; Yufeng Zheng; Li Li

    2014-01-01

    The microstructure, mechanical property, electrochemical behavior and biocompatibility of magnesium alloy (BioDe MSM™) were studied in the present work. The experimental results demonstrated that grain refining induced by extrusion improves the alloy strength significantly from 162 MPa for the as-cast alloy to 241 MPa for the as-extruded one. The anticorrosion properties of the as-extruded alloy also increased. Furthermore, the hemolysis ratio was decreased from 4.7%for the as-cast alloy to 2.9%for the as-extruded one, both below 5%. BioDe MSM™alloy shows good biocompatibility after being implanted into the dorsal muscle and the femoral shaft of the New Zealand rabbit, respectively, and there are no abnormalities after short-term implantation. In vivo observation indicated that the corrosion rate of this alloy varies with different implantation positions, with higher degradation rate in the femur than in the muscle.

  17. Effects of rare earths on friction and wear characteristics of magnesium alloy AZ91D

    Institute of Scientific and Technical Information of China (English)

    祁庆琚; 刘勇兵; 杨晓红

    2003-01-01

    The influence of various rare-earth contents on the friction and wear characteristics of magnesium alloyAZ91D was studied. The results show that the wear resistance properties of rare-earth magnesium alloys are betterthan those of the matrix alloy under the testing conditions. Magnesium alloys undergo transition from mild wear tosevere wear. The addition of rare earths refines the structure of alloys, improves the comprehensive behaviors of themagnesium alloys, increases the stability of oxidation films on worn surfaces, enhances the loading ability of rare-earth magnesium alloys, and delays the transition from mild wear to severe wear effectively.

  18. Correlation Between Microstructure and Corrosion Resistance of Magnesium Alloys Prepared by High Strain Rate Rolling

    Science.gov (United States)

    Chen, Jihua; Chen, Guanqing; Yan, Hongge; Su, Bin; Gong, Xiaole; Zhou, Bo

    2017-09-01

    Microstructure and corrosion resistance in Hank's solution of four magnesium alloys (pure Mg, ZK60, Mg-4Zn and Mg-4Zn-0.3Ca) prepared by high strain rate rolling (HSRR) and conventional rolling (CR) are comparatively investigated. The HSRR alloy exhibits better bio-corrosion resistance than the CR alloy. The HSRR ZK60 alloy has finer grains, higher dynamic recrystallization (DRX) extent, lower twin fraction, coarser residual second-phase particles, finer and denser nanometer β 1 precipitates, lower residual compressive stress and stronger basal texture than the CR alloy. The average corrosion rate of the HSRR ZK60 sheet after 90-day immersion in Hank's solution is 0.17 mg cm-2 d-1, about 19% lower than that of the CR sheet. Its corrosion current density is 30.9 μA/cm2, about 45% lower than that of the CR sheet. Bio-corrosion resistance enhancement by HSRR can be mainly ascribe to the reduced grain size, the relatively adequate DRX, non-twinning, the coarser residual second-phase particles, the finer and denser nanometer precipitates and the slightly stronger (0001) texture.

  19. The prospects of biodegradable magnesium-based alloys in osteosynthesis

    Directory of Open Access Journals (Sweden)

    V. N. Chorny

    2013-12-01

    Full Text Available In the analytical review of the literature the main stages of development of biodegradable magnesium alloys in surgery and traumatology were discussed. The analysis revealed the main problems: there is no way to control the speed of the biological resorption alloys, the effects of products of magnesium degradation on the tissues and the organism in general are not studied, there is no information on the characteristics of the regeneration of bone tissue when implanted magnesium implanted magnesium alloys Materials for osteosynthesis with metal clamps made of steel X18H9T are used in 25,0-52,2% of cases, the corrosion of fasteners reaches 18-21%. Corrosion of the metal clips leads to the increase of the concentration of iron, chromium, nickel and titanium in the surrounding tissue. Electrochemical processes in metallic implants occurs due to their structural and chemical inhomogeneous. The microstructure of stainless steel is presented by differently oriented grains. Therefore, the question remains relevant to finding biodegradable materials suitable for implants for osteosynthesis, which could be completely metabolized by the organism, without causing of the pathological effects on the surrounding tissue and the body. The property of magnesium metal dissolved in the tissues of a living organism is known since the 19th century. Payr suggested the use of magnesium metal needles for the treatment of angiomas, in order to achieve thrombosis surrounding the tumor. In 1937 Lambotte made a post in the French Surgical Academy on the application of the osteosynthesis of the shin bone clamps with alloy Dow-metal (magnesium - 92% Aluminum - 8% + traces of manganese, made in the form of loops and screws. In 1938, Earl D. Mc.Braid and published their positive experience with plates and screws made of material similar in composition to the Dow-metal for osteosynthesis of fractures of the arm and forearm bones. Magnesium alloys may be used as a material for

  20. Microstructure of MCMgAl12Zn1 magnesium alloy

    Directory of Open Access Journals (Sweden)

    Dobrzański L. A.

    2007-01-01

    Full Text Available In this paper is presented the structure of the cast magnesium alloys as cast state and after heat treatment cooled with different cooling rate, depending on the cooling medium (furnace, water, air. For investigations samples in shape of 250x150x25 mm plates were used. The structure have been study in the light microscope, scanning electron microscope equipped with an electron back scattering facility. The effects of the addition of Al on the microstructure were also studied. In the analysed alloys a structure of α solid solution and fragile phase β(Mg17Al12 occurred mainly on grain borders as well as eutectic and phase with Mn, Fe and Si. Investigation are carried out for the reason of chemical composition influence and precipitation processes influence to the structure and mechanical properties of the magnesium cast alloys with different chemical composition in as cast alloys and after heat treatment.

  1. The Influence of Novel Alloying Additions on the Performance of Magnesium Alloy AZ31B

    Science.gov (United States)

    2013-11-01

    alloys are based on a rather small group of alloying elements, there are often limited differences between them in properties (strength, corrosion ...Research Laboratory (ARL). Initially, the discussions focused on ways to improve the corrosion resistance of magnesium ( Mg ) alloys to increase the...elements display little tendency to alter precipitates or otherwise adversely influence the corrosion performance of the base alloy . Based on these

  2. Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion

    OpenAIRE

    Xuming Zhang; Guosong Wu; Xiang Peng; Limin Li; Hongqing Feng; Biao Gao; Kaifu Huo; Chu, Paul K.

    2015-01-01

    Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based on pre-corrosion by a hydrothermal treatment of Al-enriched Mg alloys in water. A uniform surface c...

  3. Hot Deformation Kinetics of Magnesium Alloy AZ31

    Institute of Scientific and Technical Information of China (English)

    WANG Lingyun; HUANG Guangjie; FAN Yonge; LU Zhiwen; PAN Fusheng

    2006-01-01

    The flow stress at elevated temperatures for magnesium alloy AZ31 was studied using isothermal compression testing. The effect of deformation parameters on the flow stress was studied as well. The kinetics of elevated temperature deformation was expressed by means of some empirical rate equations. The activation parameter has been calculated. A mechanism for the dynamic softening of AZ31 alloy in a hot deformation experiment was identified to be the dynamic recrystallization.

  4. Mechanical properties and structure of magnesium alloy AS31

    Directory of Open Access Journals (Sweden)

    A. Hanus

    2008-07-01

    Full Text Available Contemporary materials should possess high mechanical properties, physical and chemical, as well as technological ones, to ensure long and reliable use. The non-ferrous metals alloys used nowadays, including the magnesium alloys, meet the above-mentioned requirements and expectations regarding the contemporary materials.Magnesium alloys are primarily used in aeronautical and automobile industry in wide variety of structural characteristics because of their favorable combination of tensile strength (160 to 365 MPa, elastic modulus (45 GPa, and low density (1 740 kg/m3, which is two-thirds that of aluminum. Magnesium alloys have high strength-to-weight ratio (tensile strength/density, comparable to those of other structural metals. [1-6]Knowledge of the relaxation properties of metal materials at high temperatures is necessary for the verification of susceptibility of castings to the creation of defects during the production process. Temperature limits of materials where highest tension values are generated may be detected with tensile tests under high temperatures. The generated tensions in the casting are a cause of the creation and development of defects. At acoustic emission (hereinafter called the "AE" use, tensile tests at high temperatures may, among other things, be used for analysis of the AE signal sources and set, in more detail, the temperature limit of elastic-plastic deformations existence in the material under examination. The results of the temperature drop where tension at casting cooling is generated or its release at heating are basic data for controlled cooling mode (and temperature of casting knocking out of the form as well as necessary for the thermal mode for the casting tension reduction. [7-9]Knowledge of elastic-plastic properties at elevated temperatures is often important for complex evaluation of magnesium alloys. Objective of the work was focused on determination of changes of elastic-plastic properties of magnesium

  5. Effect of rolling temperature of the magnesium alloy AZ31B formability; Efeito da temperatura de laminacao na deformabilidade da liga de magnesio AZ31B

    Energy Technology Data Exchange (ETDEWEB)

    Catorceno, L.L.C.; Zimmermann, A.J.O.; Padilha, A.F., E-mail: litzy.catorceno@poli.usp.b [Universidade de Sao Paulo (DEMM/EP/USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia Metalurgica e de Materiais

    2010-07-01

    The magnesium alloy AZ31B presents an interesting set of properties, which makes it potential candidate for applications in automotive and aeronautics. The main limitation of magnesium alloys is the low capacity of plastic forming at room temperature. The main motivation of this project is to understand and control the microstructure and crystallographic texture of magnesium alloys, to improve their formability. The effect of rolling temperature on the formability of the alloy was studied in this stage of the project. The alloy in the form of annealed and recrystallized sheets (2 mm thick) was deformed by rolling at four different temperatures: 25, 100, 200 and 250 deg C. The microstructural characterization was achieved using several complementary techniques of microstructural analysis, such as optical microscopy, scanning electron microscopy, X-ray analysis by energy dispersive, X-ray diffraction and microhardness. Results about the effect of rolling temperature on the alloy formability were presented and discussed. (author)

  6. Modified AZ80 magnesium alloys for biomedical applications

    NARCIS (Netherlands)

    Erinc, M.; Zhang, X.; Sillekens, W.H.

    2010-01-01

    Magnesium and its alloys are light weight, biodegradable materials. They can be used as metal implants which maintain strength and integrity for the time of recovery, followed by natural dissolution in the body preventing the necessity of implant removal. In addition to the general biocompatibility

  7. Lessons learned from small space systems development using magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Matunaga, S.; Sawada, H. [Dept. of Mechanical and Aerospace Engineering, Tokyo Inst. of Tech. (Japan); Furuya, H. [Dept. of Built Environment, Tokyo Inst. of Tech., Kanagawa (Japan); Kogiso, N. [Dept. of Aerospace Engineering, Osaka Prefecture Univ. (Japan)

    2003-07-01

    In this paper, we discuss the effectiveness of magnesium alloys through practical space applications in which we have developed a few small-sized space systems and have used magnesium alloys in order to reduce the total mass of the systems. We introduce three examples of our developed systems. The first one is a CanSat whose is a pico-satellite sized of 350 ml can, less than 350 g in mass, and the second one is a small docking mechanism in order to grasp and guide a micro satellite for a small mothership-daughtership satellites formation flying in orbit. The last one is a CubeSat whose is a pico-satellite sized of 10 cm{sup *}10 cm{sup *}10 cm, less than 1 kg in mass and is planned to launch into a Low Earth orbit. Outline description of the systems is given, and design restrictions against magnesium alloys and the mass reduction effect compared with aluminum alloys are discussed. Also, issues of manufacturing, processing and surface treatment for the elaborate magnesium parts are explored. (orig.)

  8. Ballistic Characterization of the Scalability of Magnesium Alloy AMX602

    Science.gov (United States)

    2015-07-01

    Magnesium Alloy AMX602 by Tyrone L Jones Weapons and Materials Research Directorate, ARL Katsuyoshi Kondoh Joining and Welding Research...formed a collaborative partnership with Osaka University Joining and Welding Research Institute (JWRI), Taber Extrusions, Epson Atmix, Pacific Sowa...Powder Metallurgy 4 5. Fabrication Procedure 4 6. Mechanical Property Analysis 5 7. Ballistic Experimental Procedures 6 8. Ballistic Experimental

  9. Experimental and numerical analyses of magnesium alloy hot workability

    Directory of Open Access Journals (Sweden)

    F. Abbassi

    2016-12-01

    Full Text Available Due to their hexagonal crystal structure, magnesium alloys have relatively low workability at room temperature. In this study, the hot workability behavior of cast-extruded AZ31B magnesium alloy is studied through hot compression testing, numerical modeling and microstructural analyses. Hot deformation tests are performed at temperatures of 250 °C to 400 °C under strain rates of 0.01 to 1.0 s−1. Transmission electron microscopy is used to reveal the presence of dynamic recrystallization (DRX, dynamic recovery (DRY, cracks and shear bands. To predict plastic instabilities during hot compression tests of AZ31B magnesium alloy, the authors use Johnson–Cook damage model in a 3D finite element simulation. The optimal hot workability of magnesium alloy is found at a temperature (T of 400 °C and strain rate (ε˙ of 0.01 s−1. Stability is found at a lower strain rate, and instability is found at a higher strain rate.

  10. Fretting wear behavior of AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    CHEN An-hua; HUANG Wei-jiu; LI Zhao-feng

    2006-01-01

    The fretting behaviour of the AZ91D magnesium alloy was investigated. The influence of the number of cycles, normal load (contact pressure) and the amplitude of slip on the fretting behavior of the material were focused. Fretting tests were performed under various running conditions with regard to normal load levels and slip amplitudes. The friction coefficient between the surfaces at the fretting junction was continuously recorded. The fretting damage on the magnesium specimens was studied by SEM. The results show that the wear volume increases with the increase of slip amplitude, and linearly increases with the increase of normal load in the mixed and gross slip regime, but the normal load has no obvious effect on the wear volume in the partial slip regime. The predominant fretting wear mechanism of magnesium alloy in the slip regime is the oxidation wear, delaminated wear and abrasive wear.

  11. In vivo study of degradable magnesium and magnesium alloy as bone implant

    Institute of Scientific and Technical Information of China (English)

    HUANG Jingjing; REN Yibin; JIANG Yue; ZHANG Bingchun; YANG Ke

    2007-01-01

    In order to investigate the in vivo behavior of pure magnesium and AZ31B and the influence of mineralization induction ability,sample rods were implanted intramedullary into the femora of rabbits.After one and nine weeks,six animals from each group were sacrificed,respectively.Undecalcified cross-sections of implant were performed to observe bone-implant by scanning electron microscopy (SEM)and energy dispersive spectromicroscopy(EDS).The SEM/EDS evaluation showed that there is a thin layer of bone around magnesium and its alloy after nine-week implantation.The results further showed that the aluminum-zinc containing magnesium alloys AZ31B provided a slower degradation rate in vivo than the pure magnesium.At the locations where magnesium was resorbed,the deposition of new bone was found.The results indicate that magnesium is biocompatible,osteo-conductive and is a potential material for use as a degradable bone implant.

  12. The effects of some elements on the igniting temperature of magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Weimin [School of Materials Science and Engineering, Hebei University of Technology, P.O. Box 549, South Campus, Tianjin 300132 (China)]. E-mail: wmzhao@mail.hebut.edu.cn; Sun Yong [School of Materials Science and Engineering, Hebei University of Technology, P.O. Box 549, South Campus, Tianjin 300132 (China); Li Haipeng [School of Materials Science and Engineering, Hebei University of Technology, P.O. Box 549, South Campus, Tianjin 300132 (China); Liang Chunyong [School of Materials Science and Engineering, Hebei University of Technology, P.O. Box 549, South Campus, Tianjin 300132 (China)

    2006-02-25

    This paper studied the effects of some elements on the igniting temperature of the magnesium alloys. The main proposals of the study is to increase the igniting temperature by adding some elements to the magnesium alloys and make the magnesium alloys process easily like cast iron and aluminium without flux and gas cover. The results show that oxide film of molten Mg alloys has turned into fine and close structure from porous structure to stop the Mg alloys from oxidating further and the kindling point of magnesium alloys can be increased by about 200 deg. C.

  13. Development of biodegradable magnesium alloy stents with coating

    Directory of Open Access Journals (Sweden)

    Lorenza Petrini

    2014-07-01

    Full Text Available Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature allows avoiding the risk of long-term complications such as restenosis or mechanical instability of the device when the vessel grows in size in pediatric patients. Up to now biodegradable stents made of polymers or magnesium alloys have been proposed. However, both the solutions have limitations. The polymers have low mechanical properties, which lead to devices that cannot withstand the natural contraction of the blood vessel: the restenosis appears just after the implant, and can be ascribed to the compliance of the stent. The magnesium alloys have much higher mechanical properties, but they dissolve too fast in the human body. In this work we present some results of an ongoing study aiming to the development of biodegradable stents made of a magnesium alloy that is coated with a polymer having a high corrosion resistance. The mechanical action on the blood vessel is given by the magnesium stent for the desired period, being the stent protected against fast corrosion by the coating. The coating will dissolve in a longer term, thus delaying the exposition of the magnesium stent to the corrosive environment. We dealt with the problem exploiting the potentialities of a combined approach of experimental and computational methods (both standard and ad-hoc developed for designing magnesium alloy, coating and scaffold geometry from different points of views. Our study required the following steps: i selection of a Mg alloy suitable for stent production, having sufficient strength and elongation capability; ii computational optimization of the stent geometry to minimize stress and strain after stent deployment, improve scaffolding ability and corrosion resistance; iii development of a numerical model for studying stent

  14. Effects of various Mg-Sr master alloys on microstructural refinement of ZK60 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The effects of various Mg-Sr master alloys (conventional as-cast, rapidly-solidified, rolled and solutionized) on microstructural refinement of ZK60 magnesium alloy were investigated. The results indicate that the refinement efficiency of various Mg-Sr master alloys in ZK60 alloy is different. The rolled Mg-Sr master alloy is found to have relatively higher refinement efficiency than the conventional as-cast, solutionized and rapidly-solidified Mg-Sr master alloys. After being treated with the rolled Mg-Sr master alloy, the ZK60 alloy obtains the minimum average grain size of 33 μm. The difference of various Mg-Sr master alloys in refinement efficiency might be related to the initial microstructure change of various Mg-Sr master alloys.

  15. Copper-Silicon-Magnesium Alloys for Latent Heat Storage

    Science.gov (United States)

    Gibbs, P. J.; Withey, E. A.; Coker, E. N.; Kruizenga, A. M.; Andraka, C. E.

    2016-12-01

    The systematic development of microstructure, solidification characteristics, and heat of solidification with composition in copper-silicon-magnesium alloys for thermal energy storage is presented. Differential scanning calorimetry was used to relate the thermal characteristics to microstructural development in the investigated alloys and clarifies the location of one of the terminal three-phase eutectics. Repeated thermal cycling highlights the thermal storage stability of the transformation through multiple melting events. Two near-terminal eutectic alloys display high enthalpies of solidification, relatively narrow melting ranges, and stable transformation hysteresis behaviors suited to thermal energy storage.

  16. Electrolyte Optimization of Microarc Oxidation of Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    FANG Da-ran; WANG Ji-hui; YANG Jing

    2004-01-01

    Magnesium alloy AZ91D was processed respectively in one, two, three and four-component electrolytes by using AC microarc oxidation technique. The corrosion resistance of AZ9 1D alloy was measured by electrochemical methods. The optimum electrolytes in two, three and four components were found. In four-component electrolyte composed by NaOH,NaAlO2, H2O2 and C4H4O6Na2, the film formed on AZ91D alloy is smooth and compact, and has a higher corrosion resistance. The effect of the ingredients in electrolytes was discussed based on their roles in the formation of corrosion resistant film.

  17. Electrolyte Optimization of Microarc Oxidation of Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    FANGDa-ran; WANGJi-hui; YANGJing

    2004-01-01

    Magnesium alloy AZ91D was processed respectively in one, two, three and four-component electrolytes by using AC microarc oxidation technique. The corrosion resistance of AZ91D alloy was measured by electrochemical methods. The optimum electrolytes in two, three and four components were found. In four-component electrolyte composed by NaOH, NaAlO2, H2O2 and C4H4O6Na2, the film formed on AZ91D alloy is smooth and compact, and has a higher corrosion resistance. The effect of the ingredients in electrolytes was discussed based on their roles in the formation of corrosion resistant film.

  18. Processing of magnesium alloys with ultrafine grain structure

    Science.gov (United States)

    Figueiredo, Roberto Braga

    The relationship between processing, structure and properties is analyzed in magnesium alloys subjected to equal-channel angular pressing. Finite element modeling is used to show that the flow softening behavior associated with grain refinement might cause shear localization and billet failure in magnesium alloys processed by ECAP. It also shows that increasing the angle between the channels of the die reduces the accumulated damage in the billets and increasing the material strain rate sensitivity reduces the tendency for shear localization. Both procedures reduce the tendency for billet cracking. The mechanism of grain refinement in magnesium alloys deformed at moderate temperatures differs from that observed in other metals such as copper and aluminum. Fine grains nucleate along pre-existing grain boundaries in a necklace pattern in coarse-grained magnesium while homogeneous nucleation of fine grains is observed in fine-grained. A bimodal grain size distribution is observed after processing alloys from an initial coarse structure and a homogeneous distribution of ultrafine grains is the outcome of a starting fine one. Experiments and simulations are used to analyze the evolution of texture. It is shown that different components are formed depending on the activity ratio of non-basal slip and processing route. The measured pole figures exhibit features characteristic of high activity of non-basal slip. It is also shown that the development of some texture components and their orientation depends on the initial texture and the die angle which provide the basis for future texture engineering. Excellent superplastic properties, including a record elongation for a magnesium alloy, were observed after ECAP. Systematic research showed that the structure characteristics prior and after ECAP play significant role on these properties. Grain growth during superplastic deformation causes a strain hardening effect. The experimental results showed good agreement with the

  19. Steady State Rheological Characteristic of Semisolid Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Isothermal compressive experiments at different temperatures, strain rates and holding time for semisolid AZ91D, Zr modified AZ91D and MB15 alloy with higher solid volume fraction were carried out by using Gleeble-15000 simulator and the true stress-strain curves were given directly. The relationship of apparent viscosity vs temperature, shear rate and holding time of the three kinds of semi-solid magnesium alloys, as well as isothermal steady state rheological characteristic and mechanical behavior were studied. The results show that the three magnesium alloys had the characteristic of shear-thinning. The rheological characteristic of the semi-solid MB15 is different from that of semi-solid AZ91D. The semi-solid MB15 has higher apparent viscosity and deformation resistance.

  20. Environmentally friendly anodization on AZ31 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A novel anodization which is environmentally friendly,low voltage and lOW energy consumption was developed to improve corrosion resistance of AZ31 magnesium alloy.The corrosion resistance of the anodic films was studied by electrochemical impedance spectroscopy(EIS)and potentiodynamic polarization techniques.The microstructure and compositions of films were examined by SEM,XPS and XRD.A new kind of organic additive used in the electrolyte is friendly to the environment.The compact,intact and uniform coating with high hardness can be prepared on AZ31 magnesium alloy by the environmentally friendly anodization,which enhances the corrosion resistance of AZ31 Mg alloy significantly.

  1. Shear bands in magnesium alloy AZ31

    Institute of Scientific and Technical Information of China (English)

    杨平; 毛卫民; 任学平; 唐全波

    2004-01-01

    During deformation of magnesium at low temperatures, cracks always develop at shear bands. The origin of the shear bands is the {101-1} twinning in basal-oriented grains and the mobility of this type of twin boundary is rather low. The most frequent deformation mechanisms in magnesium at low temperature are basal slip and {1012} twinning, all leading to the basal texture and therefore the formation of shear bands with subsequent fracture. The investigation on the influences of initial textures and grain sizes reveals that a strong prismatic initial texture of parallels to TD and fine grains of less than 5 μm can restrict the formation and expansion of shear bands effectively and therefore improve the mechanical properties and formability of magnesium.

  2. Fundamentals of the new rheocasting process for magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann, H. [ARC Leichtmetall Kompetenzzentrum Ranshofen GmbH, Ranshofen (Austria); Uggowitzer, P.J. [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

    2001-12-01

    Casting of high strength, ductile and pressure tight components at low cost is the prerequisite for the introduction of magnesium alloys into hydraulic and structural applications. This paper introduces the New Rheocasting process (NRC) as a novel approach for semi-solid casting of light metals, in which the slurry is prepared from normal casting alloys directly at the foundry machine. The specialties of the process and the alloy requirements are explained. Ways for increasing ductility and process stability with slight alloy modifications and proper heat treatment are shown. The resulting mechanical properties are compared with data received from classical high pressure die casting parts. New Rheocasting of the alloy AZ71proves to be superior in strength and ductility, and shows excellent K{sub JC} values. (orig.)

  3. Processing aspects of magnesium alloy stent tube

    NARCIS (Netherlands)

    Werkhoven, R.J.; Sillekens, W.H.; Lieshout, J.B.J.M. van

    2011-01-01

    Biomedical applications are an emerging field of interest for magnesium technology, envisioning biodegradable implants that resorb in the human body after having cured a particular medical condition (such as artery clogging or bone fractures). This challenges research in a sense that the materials t

  4. Processing aspects of magnesium alloy stent tube

    NARCIS (Netherlands)

    Werkhoven, R.J.; Sillekens, W.H.; Lieshout, J.B.J.M. van

    2011-01-01

    Biomedical applications are an emerging field of interest for magnesium technology, envisioning biodegradable implants that resorb in the human body after having cured a particular medical condition (such as artery clogging or bone fractures). This challenges research in a sense that the materials t

  5. Thermal conductivities of nanostructured magnesium oxide coatings deposited on magnesium alloys by plasma electrolytic oxidation.

    Science.gov (United States)

    Shen, Xinwei; Nie, Xueyuan; Hu, Henry

    2014-10-01

    The resistances of magnesium alloys to wear, friction and corrosion can be effectively improved by depositing coatings on their surfaces. However, the coatings can also reduce the heat transfer from the coated components to the surroundings (e.g., coated cylinder bores for internal combustion of engine blocks). In this paper, nanostructured magnesium oxides were produced by plasma electrolytic oxidation (PEO) process on the magnesium alloy AJ62 under different current densities. The guarded comparative heat flow method was adopted to measure the thermal conductivities of such coatings which possess gradient nanoscale grain sizes. The aim of the paper is to explore how the current density in the PEO process affects the thermal conductivity of the nanostructured magnesium coatings. The experimental results show that, as the current density rises from 4 to 20 A/mm2, the thermal conductivity has a slight increase from 0.94 to 1.21 W/m x K, which is significantly smaller than that of the corresponding bulk magnesium oxide materials (29.4 W/m x K). This mostly attributed to the variation of the nanoscale grain sizes of the PEO coatings.

  6. THE FORMING OF MAGNESIUM ALLOY FORGINGS FOR AIRCRAFT AND AUTOMOTIVE APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Anna Dziubińska

    2016-09-01

    Full Text Available The paper presents the theoretical and technological aspects of forming magnesium alloy parts for aircraft and automotive applications. The main applications of magnesium alloys in the aircraft and automotive industries are discussed. In addition, the forging technology for magnesium alloys is generally described, with a particular emphasis on wrought alloys. A brief outline of the state of the art in the forging of magnesium alloys is given based on a survey of the specialist literature and the results of previous research by the authors.

  7. HOW TO MAKE MAGNESIUM ALLOYS BE RESISTANT TO OPERATIONAL RISKS

    Directory of Open Access Journals (Sweden)

    N. M. Chigrinova

    2016-01-01

    Full Text Available The paper studies regularities and mechanisms of structure and phase formation in the surface layers of magnesium alloys when they are processed by method of micro-arc oxidation [MAO]. It has been determined that the same specific features of structure formation, namely: existence of a thin dense inner sublayer and a thicker outer sublayer with developed porosity are common for all types of coatings on the surface of magnesium and aluminum alloys. Such structural state of a protective coating can not be considered as a guaranteed protection against operational impacts, taking into account the fields of their primary application that is aviation construction, automotive construction, instrumentation, building construction, etc. The paper has analyzed the effect of alkaline electrolytes with varying chemical composition due to additions of sodium fluoride or potassium on the structure and properties of these alloys as well as on the level of basic performance characteristics of the layers formed in such electrolytes. On the basis of the analysis a conclusion has been made that it is possible to extend their life-span under operational conditions. It has been revealed that the existing techniques and methods for process control of MAO aluminum and magnesium alloys, particularly processing modes and technological equipment capacity determine a nature of structure formation and changes in a phase composition of the formed coatings.

  8. Formation of Aluminum-magnesium Alloy Cup by Hydrodynamic Deep Drawing with Twin-loading Paths

    Institute of Scientific and Technical Information of China (English)

    LIU Xiaojing; XU Yongchao; YUAN Shijiang

    2009-01-01

    In order to overcome the limitation of hydro-rim deep drawing, a new process of hydrodynamic deep drawing (HDD) with independent radial hydraulic pressure was proposed. By employing the dynamic explicit analytical software ETA/Dynaform5.5 which is based onLS-DYNA3D, the effects of independent radial hydraulic pressure on the stress, strain and the sheet-thickness of aluminum-magnesium cylindrical cup with a hemispherical bottom were analyzed by numerical simulation. The feature of stress distribution is that there exists a stress-dividing circle in the flange, and the radius of dividing circle was determined by theoretical analysis and stimulation.The experimental results indicate that the reasonable match of independent radial hydraulic pressure and liquid chamber pressure can effectively reduce the thinning at the bottom of hemisphere, decrease the radial stress-strain, and improve the drawing limit of aluminum-magnesium alloy cylindrical cup.

  9. Friction stir welding of AZ31 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    林三宝; 张华; 吴林; 冯吉才; 戴鸿滨

    2003-01-01

    Friction stir welding (FSW) is an new solid-phase joining technology which has more advantages over fusion welding methods in welding of aluminum and other non-ferrous metals. The effects of welding parameters on mechanical properties and microstructure during friction stir welding of AZ31 magnesium alloy were studied in this paper. Microstructures and mechanical properties of the joints were investigated by means of optical microscopy, scanning electric microscopy (SEM), micro-hardness analysis, and tensile test. Experimental results show that the magnesium alloy can be successfully welded by FSW method, and the ultimate tensile strength (UTS) of FSW joint reaches up to 90 percent of base metal. The microstructures of welded joints exhibit the variation from dynamically recrystallized fine grains to greatly deformed grains. Hardness in nugget zone was found lower than the base metal but not too obvious.

  10. Cathodic phosphate coating containing nano zinc particles on magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A technology for preparation of a cathodic phosphate coating mainly containing nano metallic zinc particles and phosphate compounds on magnesium alloy was developed.The influence of cathodic current density on the microstructure of the cathodic phosphate coating Was investigated.The results show that the crystals of the coating are finer and the microstructures of the outer surface of the coatings are zigzag at the cathodic density of 0.2-0.5 A/dm2.The content of nano metallic zinc particles in the coating decreases with the increase of the thickness of the coatings and tends to be zero when the coating thickness is 4.14 μm.The cathodic phosphate coating was applied to be a transition coating for improving the adhesion between the paints and the magnesium alloys.The formation mechanism of the cathodic phosphate coating was investigated as well.

  11. One-step pickling-activation before magnesium alloy plating

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-juan; YU Gang; OUYANG Yue-jun; HE Xiao-mei; ZHANG Jun; YE Li-yuan

    2009-01-01

    A one-step pickling-activation process was proposed as an environmental friendly pretreatment method in phosphate-permanganate solution before electroplating on magnesium alloys. The effects of pickling-activation on qualities of coating were assessed by adhesion and porosity testing of copper plating. The interfacial reactions between specimen and solution were analyzed with SEM, EDX and XRD. The results show that the developed process of pickling-activation can equalize the potentials on substrate surface. The compacted zinc film can be obtained by zinc immersion after treating magnesium alloy in the pH 4-6 phosphate-permanganate solution for 3-5 min. The adhesion and corrosion resistance of copper plating are enhanced. The one-step pickling-activation can replace the existing two-step process of acid pickling and activation which contains a great deal of chromium and fluorine. The procedure of surface pretreatment is simplified and the production environment is improved.

  12. Thermal analytical investigations of the magnesium alloy AZ91

    Directory of Open Access Journals (Sweden)

    K.N. Braszczyńska - Malik

    2007-04-01

    Full Text Available The results of thermal derivative analysis (TDA, differential scanning calorimetric (DSC measurements and microstructure investigations of commercial AZ91 magnesium alloy are presented. The performed examinations allowed to determine the microstructure after solidification process and also precipitation process during continuous heating of supersaturated solid solution. The α-phase and α+γ semi-divorced eutectic were observed in as-cast material, whereas both discontinuous and continuous precipitates of γ phase were revealed after heating supersaturated AZ91 alloy.

  13. Finite Element Simulation of Magnesium Alloy AZ31 Tube Bending

    Directory of Open Access Journals (Sweden)

    Wu Wenyun

    2016-01-01

    Full Text Available A finite element method based model has been developed for magnesium alloy AZ31 tube bending process simulation, using the tensile (for bend outer radius and compressive (for bend inner radius properties of the AZ31 alloy at the bending temperature of 150°C. The results shown that very high compressive stresses are developed in the bend inner radius, limiting the minimum bend radius for the AZ31 tube. The simulation results suggest the minimum centerline bend radius to the tube outer diameter ratio is 1.5 to 2. The maximum diameter to thickness ratio is 30.

  14. Corrosion behaviour of aluminium-magnesium alloys in molten sodium

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The corrosion behaviour of the Al-1% Mg, A1-3% Mg, A1-5% Mg and A1-3% Mg-0.15%Zr alloys in moltensodium was investigated. The morphology of the corrosion products and the alloying element distribution of the specimenswere analyzed by using OM, SEM and EDS. The results showed that the effects of the magnesium content and the im-mersion temperature on the corrosion of the specimens are related to β phase (Mg5Al8).

  15. Correlation of recalescence with grain refinement of magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The grain refinement of Mg-Al based alloys with carbon inoculation was investigated by a computer-aided cooling curve analysis(CA-CCA)system.The results show that carbon inoculation decreases the main parameters of the recalescence regime during the initial stage of solidification.These parameters include the recalescence undercooling(△θrec),duration of recalescence (trec),and liquid peak parameter(LPP)which is firstly introduced into magnesium alloys.The resultant grain size decreases with increasing nucleation temperature(θn)and decreasing values of △θrec,trec and LPE

  16. Infrared measurement and simulation of magnesium alloy welding temperature field

    Institute of Scientific and Technical Information of China (English)

    LIU Liming; CHI Mingsheng; HUANG Ruisheng; SONG Gang; ZHOU Yang

    2005-01-01

    The welding temperature field of magnesium alloy AZ31 welded by TIG was measured with the uncooled infrared (IR) thermal imaging technology. The variables in the mathematic mode of welding temperature fields were revised by IR temperature data. Based on the results of simulation, the loss of temperature fields caused by arc interfered was compensated, and a whole temperature field was achieved, which provided a precise and powerful foundation for the investigation of microstructure of the joints.

  17. Mechanoelectrochemical behavior and plasticity of magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Eliezer, A.; Gutman, E.M.; Abramov, E.; Aghion, E. [Ben-Gurion Univ. of the Negev, Beersheba (Israel). Dept. of Materials Engineering

    1998-12-31

    The mechanical properties and mechanoelectrochemical effect (the effect of mechanical deformation on the surface electrochemical reactions) were investigated for some Mg-based alloys supposing that aluminum alloying influences them. A simple method of testing mechanoelectrochemical behavior of metals was developed. Potentiostatic polarization measurements on stressed electrode were carried out in chloride electrolyte. The correlation between the mechanoelectrochemical behavior and strain hardening stages is observed during plastic deformation. Maximum mechanoelectrochemical effect is achieved under intense strain hardening in the initial portion of this stage. The experimental observations are explained theoretically. (orig.) 9 refs.

  18. Effect of magnetostatic field on microstructure of magnesium alloy ZK60

    Institute of Scientific and Technical Information of China (English)

    许光明; 包卫平; 崔建忠; 左玉波

    2003-01-01

    The microstructures of cast magnesium alloys solified without electromagnetic field,under low-frequency magnetic field,and under magnetostatic field were compared.The results show that the grain is greatly refined when the magnesium alloy solidifies in the magnetostatic field,the thickness of boundary compound decreases,and much fine massive compound appears,therefore the forming property of magnesium alloy is improved.

  19. Microstructure analysis of magnesium alloy melted by laser irradiation

    Science.gov (United States)

    Liu, S. Y.; Hu, J. D.; Yang, Y.; Guo, Z. X.; Wang, H. Y.

    2005-12-01

    The effects of laser surface melting (LSM) on microstructure of magnesium alloy containing Al8.57%, Zn 0.68%, Mn0.15%, Ce0.52% were investigated. In the present work, a pulsed Nd:YAG laser was used to melt and rapidly solidify the surface of the magnesium alloy with the objective of changing microstructure and improving the corrosion resistance. The results indicate that laser-melted layer contains the finer dendrites and behaviors good resistance corrosion compared with the untreated layer. Furthermore, the absorption coefficient of the magnesium alloy has been estimated according to the numeral simulation of the thermal conditions. The formation process of fine microstructure in melted layers was investigated based on the experimental observation and the theoretical analysis. Some simulation results such as the re-solidification velocities are obtained. The phase constitutions of the melted layers determined by X-ray diffraction were β-Mg 17Al 12 and α-Mg as well as some phases unidentified.

  20. Evolution of microstructure and texture of AZ31 magnesium alloy extrusion sheet by hot rolling with falling temperature%AZ31镁合金挤出板降温热轧的组织和织构的演变

    Institute of Scientific and Technical Information of China (English)

    曲家惠; 岳明凯; 黄涛

    2009-01-01

    The evolution law of microstructure and texture in extruded sheets of magnesium alloy AZ31 during the hot rolling falling temperature process was studied. The results show that slipping and twinning are the major deforming and orientational hardening mechanism before annealing while the sliding of long grain in combination with the diffusing transfer of fine equiaxed grain boundary becomes a major deforming one after annealing. With increasing the reduction, the precipitation falls to pieces and spreads around. And the basal plane texture component has a maximum mutation value of orientation density with reductions of 70%-80%. So a basal plane texture component {0001} is formed, which has stronger orientation density that can be greatly reduced by softening annealing. A sheet of 0.5 mm in thickness can be made from magnesium alloy AZ31 by one 67% reduction pass and one softening annealing pass.%研究AZ31镁合金挤出板坯在降温热轧过程中的组织和织构的演变规律.结果表明:退火前滑移和孪生是主要的变形机制和取向硬化机制;退火后长条晶的滑移和细小等轴晶晶界扩散迁移的共同作用成为主要的变形机制;随着压下量的增大,析出物开始破碎和分散,压下量在70%~80%之间时,基面织构组分的取向密度存在突变最大值,形成硬取向较强的{0001}基面织构,软化退火能大幅减弱硬取向;通过一道67%大压下量和一次软化退火可顺利地将AZ31镁合金轧制成厚0.5 mm的薄板.

  1. Corrosion action and passivation mechanism of magnesium alloy in fluoride solution

    Institute of Scientific and Technical Information of China (English)

    LI Jian-zhong; HUANG Jiu-gui; TIAN Yan-wen; LIU Chang-sheng

    2009-01-01

    Corrosion action and passive mechanism of magnesium alloy in the fluoride solution were studied by means of scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), and electrochemistry methods. The results show that an insoluble MgF2 film is generated on the surface of magnesium alloy activated in the hydrofluoric acid. And the mass of the deposited MgF2 film may reach a constant value, when the mass ratio of Mg/F on the magnesium alloy surface is fixed at 11.3-1. The activated magnesium alloy gains a 'passivation state' in a mixture of sulfuric acid and hydrofluoric acid at a volume ratio of less than 1.2. At the same time the mass of magnesium alloy is maintained as a function of the time. When the ratio is above 1.4, the mass of magnesium alloy rapidly decreases. The passive film formed through adsorption of HF2- (or H2F3-, H3F4-) ions by the deposited MgF2 film can protect the magnesium alloy from corrosion in fluoride solution, but not in non-fluoride solutions. The passive state is maintained for activated magnesium alloy in an acidic sulfuric nickel solution with added fluoride. If fluoride and carbonate are added to the acidic sulfuric nickel solution, a replacement reaction between magnesium alloy and solution takes place.

  2. Microstructure and Thermomechanical Properties of Magnesium Alloys Castings

    Directory of Open Access Journals (Sweden)

    P. Lichý

    2012-04-01

    Full Text Available Magnesium alloys thanks to their high specific strength have an extensive potential of the use in a number of industrial applications. The most important of them is the automobile industry in particular. Here it is possible to use this group of materials for great numbers of parts from elements in the car interior (steering wheels, seats, etc., through exterior parts (wheels particularly of sporting models, up to driving (engine blocks and gearbox mechanisms themselves. But the use of these alloys in the engine structure has its limitations as these parts are highly thermally stressed. But the commonly used magnesium alloys show rather fast decrease of strength properties with growing temperature of stressing them. This work is aimed at studying this properties both of alloys commonly used (of the Mg-Al-Zn, Mn type, and of that ones used in industrial manufacture in a limited extent (Mg-Al-Sr. These thermomechanical properties are further on complemented with the microstructure analysis with the aim of checking the metallurgical interventions (an effect of inoculation. From the studied materials the test castings were made from which the test bars for the tensile test were subsequently prepared. This test took place within the temperature range of 20°C – 300°C. Achieved results are summarized in the concluding part of the contribution.

  3. On the shock response of the magnesium alloy Elektron 675

    Science.gov (United States)

    Hazell, Paul; Appleby-Thomas, Gareth; Siviour, Clive; Wielewski, Euan

    2011-06-01

    Alloying elements such as aluminium, zinc or rare-earths allow precipitation hardening of magnesium (Mg). The low densities of such strengthened Mg alloys have led to their adoption as aerospace materials and (more recently) they are being considered as armour materials. Consequently, understanding their response to high-strain rate loading is becoming increasingly important. Here, the plate-impact technique was employed to measure longitudinal stress evolution in armour-grade wrought Mg-alloy Elektron 675 under 1D shock loading. The strength and spall behaviour was interrogated, with an estimate made of the material's Hugoniot elastic limit. Finally, electron backscatter diffraction (EBSD) techniques were employed to investigate post-shock microstructural changes.

  4. Property Criteria for Automotive Al-Mg-Si Sheet Alloys

    Directory of Open Access Journals (Sweden)

    Ramona Prillhofer

    2014-07-01

    Full Text Available In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013. The parameters crucial to predicting forming behavior were determined by tensile tests, bending tests, cross-die tests, hole-expansion tests and forming limit curve analysis in the pre-aged temper after various storage periods following sheet production. Roping tests were performed to evaluate surface quality, for the deployment of these alloys as an outer panel material. Strength in service was also tested after a simulated paint bake cycle of 20 min at 185 °C, and the corrosion behavior was analyzed. The study showed that forming behavior is strongly dependent on the type of alloy and that it is influenced by the storage period after sheet production. Alloy AA6016 achieves the highest surface quality, and pre-ageing of alloy AA6013 facilitates superior strength in service. Corrosion behavior is good in AA6005A, AA6063 and AA6016, and only AA6013 shows a strong susceptibility to intergranular corrosion. The results are discussed below with respect to the chemical composition, microstructure and texture of the Al-Mg-Si alloys studied, and decision-making criteria for appropriate automotive sheet alloys for specific applications are presented.

  5. Influence of Cooling Rate on Microsegregation Behavior of Magnesium Alloys

    Directory of Open Access Journals (Sweden)

    Md. Imran Khan

    2014-01-01

    Full Text Available The effect of cooling rate on microstructure and microsegregation of three commercially important magnesium alloys was investigated using Wedge (V-shaped castings of AZ91D, AM60B, and AE44 alloys. Thermocouples were distributed to measure the cooling rate at six different locations of the wedge casts. Solute redistribution profiles were drawn based on the chemical composition analysis obtained by EDS/WDS analysis. Microstructural and morphological features such as dendrite arm spacing and secondary phase particle size were analyzed using both optical and scanning electron microscopes. Dendritic arm spacing and secondary phase particle size showed an increasing trend with decreasing cooling rate for the three alloys. Area percentage of secondary phase particles decreased with decreasing cooling rate for AE44 alloy. The trend was different for AZ91D and AM60B alloys, for both alloys, area percentage of β-Mg17Al12 increased with decreasing cooling rate up to location 4 and then decreased slightly. The tendency for microsegregation was more severe at slower cooling rates, possibly due to prolonged back diffusion. At slower cooling rate, the minimum concentration of aluminum at the dendritic core was lower compared to faster cooled locations. The segregation deviation parameter and the partition coefficient were calculated from the experimentally obtained data.

  6. A Model for Gas Microporosity in Aluminum and Magnesium Alloys

    Science.gov (United States)

    Felicelli, Sergio D.; Wang, Liang; Pita, Claudio M.; Escobar de Obaldia, Enrique

    2009-04-01

    A quantitative prediction of the amount of gas microporosity in aluminum and magnesium-alloy castings is performed with a continuum model of dendritic solidification. The distribution of the pore volume fraction and pore size is calculated from a set of conservation equations that solves the transport phenomena during solidification at the macroscale and the hydrogen diffusion into the pores at the microscale. A technique based on a pseudo-alloy solute that is transported by the melt is used to determine the potential sites of pore growth, subject to considerations of mechanical and thermodynamic equilibrium. The modeling results for aluminum alloy A356 are found to agree well with published studies. In view of the limited availability of experimental data for Mg-alloy gravity-poured castings, the formation of porosity in AZ91 is studied qualitatively, assuming that casting conditions are similar to A356. In particular, the minimum initial hydrogen content that leads to the formation of gas porosity was compared for both alloys. It is found that the initial hydrogen content necessary for forming porosity is much higher in AZ91 than in A356. This is attributed to significant differences in the solubility of the hydrogen in both alloys.

  7. Influence of the deformation mechanism on the anisotropy of the mechanical properties and workability of magnesium alloys

    Science.gov (United States)

    Betsofen, S. Ya.; Il'in, A. A.; Ashmarin, A. A.; Shaforostov, A. A.

    2008-06-01

    An experimental calculation method for the estimation of anisotropy is developed for semifinished sheet and pressed products made from magnesium alloys. The method makes it possible to calculate the anisotropy parameters from quantitative data on the texture and the relative values of the reduced critical shear stresses for the slip and twinning mechanisms operating in these alloys. The optimal alloying of magnesium alloys is shown to provide two methods for enhancing the deep drawing characteristics, namely, decreasing the intensity of the basal texture due to the formation of dispersed intermetallic compounds and increasing the compressive-strain resistance compared to tension due to a change in the deformation mechanism. Yttrium and neodymium are found to be most efficient in this respect, because they favor such a deformation mechanism that increases the Lankford coefficient by two to four times at the same texture in sheets. In addition, neodymium alloying weakens the intensity of the basal texture, which also favors an increase in the Lankford coefficient.

  8. Comparison of corrosion behaviors of AZ31, AZ91,AM60 and ZK60 magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    CHENG Ying-liang; QIN Ting-wei; WANG Hui-min; ZHANG Zhao

    2009-01-01

    The corrosion behaviours of four kinds of rolled magnesium alloys of AZ31, AZ91, AM60 and ZK60 were studied in 1 mol/L sodium chloride solution. The results of EIS and potentiodynamic polarization show that the corrosion resistance of the four materials is ranked as ZK60>AM60>AZ31>AZ91. The corrosion processes of the four magnesium alloys were also analyzed by SEM and energy dispersive spectroscopy(EDS). The results show that the corrosion patterns of the four alloys are localized corrosion and the galvanic couples formed by the second phase particles and the matrix are the main source of the localized corrosion of magnesium alloys. The corrosion resistance of the different magnesium alloys has direct relationship with the concentration of alloying elements and microstructure of magnesium alloys. The ratio of the β phase in AZ91 is higher than that in AZ31 and the β phase can form micro-galvanic cell with the alloy matrix, as a result, the corrosion resistance of AZ31 will be higher than AZ91. The manganese element in AM60 magnesium alloy can form the second phase particle of AlMnFe, which can reduce the Fe content in magnesium alloy matrix, purifying the microstructure of alloy, as a result, the corrosion resistance of AM60 is improved. However, due to the more noble galvanic couples of AlMnFe and matrix, the microscopic corrosion morphology of AM60 is more localized. The zirconium element in ZK60 magnesium alloy can refine grain, form stable compounds with Fe and Si, and purify the composition of alloy, which results in the good corrosion resistance of ZK60 magnesium alloy.

  9. Laser cutting of lightweight alloys sheets with 1μm laser wavelength

    Science.gov (United States)

    Scintilla, Leonardo Daniele; Tricarico, Luigi

    2013-02-01

    High power fiber laser sources, with a radiation wavelength equal to about 1 μm, offer a great potential in improving the productivity and quality of thin aluminum, magnesium and titanium alloys sheets cutting. This is due to their benefits that are of special interest for this application: power efficiency, beam guidance and beam quality. In this work, an overview regarding the phenomena that for different reasons affect the laser cutting of these materials was given. These phenomena include the formation of a heat affected zone, the chemical contamination, the change of corrosion resistance, the thermal reactivity, the effects of thermal conductivity, reflectivity and viscosity of molten material. The influence of processing parameters on 1 mm thick Al 1050, AZ31 and Ti6Al4V lightweight alloys were experimentally investigated and cutting performances in terms of cut quality, maximum processing speeds and severance energies were evaluated. The advantages of using 1 μm laser wavelength for thin sheets lightweight alloys cutting due to the good cut quality, high productivity and the easily delivery of the beam through the optical fiber, were demonstrated. Results showed that fiber lasers open up new solutions for cutting lightweight alloys for applications like coil sheet cutting, laser blanking, trimming and cutting-welding combination in tailor welded blanks applications.

  10. Endothelial responses of magnesium and other alloying elements in magnesium-based stent materials

    Science.gov (United States)

    Zhao, Nan; Zhu, Donghui

    2016-01-01

    Biodegradable tailored magnesium (Mg) alloys are some of the most promising scaffolds for cardiovascular stents. During the course of degradation after implantation, all the alloying elements in the scaffold will be released to the surrounding vascular tissues. However, fundamental questions regarding the toxicity of alloying elements towards vascular cells, the maximum amount of each element that could be used in alloy design, or how each of the alloying elements affects vascular cellular activity and gene expression, are still not fully answered. This work systematically addressed these questions by revealing how application of different alloying elements commonly used in Mg stent materials influences several indices of human endothelial cell health, i.e., viability, proliferations, cytoskeletal reorganizations, migration, and the gene expression profile. The overall cell viability and proliferation showed a decreasing trend with increasing concentrations of the ions, and the half maximal effective concentrations (EC50) for each element were determined. When applied at a low concentration of around 10 mM, Mg had no adverse effects but improved cell proliferation and migration instead. Mg ions also altered endothelial gene expression significantly in a dose dependent manner. Most of the changed genes are related to angiogenesis and the cell adhesion signaling pathways. Findings from this work provide useful information on maximum safe doses of these ions for endothelial cells, endothelial responses towards these metal ions, and some guidance for future Mg stent design. PMID:25363018

  11. Effect of Alloying Elements on Nano-ordered Wear Property of Magnesium Alloys

    Science.gov (United States)

    Yagi, Takahiro; Hirayama, Tomoko; Matsuoka, Takashi; Somekawa, Hidetoshi

    2017-03-01

    The effect of alloying elements on nano-ordered wear properties was investigated using fine-grained pure magnesium and several types of 0.3 at. pct X (X = Ag, Al, Ca, Li, Mn, Y, and Zn) binary alloys. They had an average grain size of 3 to 5 μm and a basal texture due to their production by the extrusion process. The specific wear rate was influenced by the alloying element; the Mg-Ca and Mg-Mn alloys showed the best and worst wear property, respectively, among the present alloying elements, which was the same trend as that for indentation hardness. Deformed microstructural observations revealed no formation of deformation twins, because of the high activation of grain boundary-induced plasticity. On the contrary, according to scratched surface observations, when grain boundary sliding partially contributed to deformation, these alloys had large specific wear rates. These results revealed that the wear property of magnesium alloys was closely related to the plastic deformation mechanism. The prevention of grain boundary sliding is important to improve the wear property, which is the same as that of a large-scale wearing configuration. One of the influential factors is the change in the lattice parameter with the chemical composition, i.e., ∂( c/ a)/∂ C. An alloying element that has a large value of ∂( c/ a)/∂ C effectively enhances the wear property.

  12. Liquid phase surface alloying of AZ91D magnesium alloy with Al and Ni powders

    Energy Technology Data Exchange (ETDEWEB)

    Elahi, Mohammad Reza, E-mail: m.r_elahi@alumni.ut.ac.ir [School of Metallurgy and Materials, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Sohi, Mahmoud Heydarzadeh; Safaei, Abdolghayoom [School of Metallurgy and Materials, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of)

    2012-05-15

    In this paper, liquid phase surface alloying of AZ91D magnesium alloy was carried out by pre-placing of Al and Ni powder mixture and subsequent tungsten inert gas (TIG) melting process. The effects of TIG processing parameters on both microstructures and resulting hardness were investigated. Microstructures of alloyed layers were studied by optical microscope, and scanning electron microscope equipped with energy dispersive X-ray spectroscopy (EDS) analyzer, and the phases were identified by X-ray diffraction analysis. The microhardness of the surface alloyed layer was also measured. The surface hardness was increased from 80 HV{sub 0.1} for AZ91D magnesium alloy to as high as 162 HV{sub 0.1} for alloyed sample due to the formation of Mg{sub 17}Al{sub 12} and AlNi{sub 3} intermetallic compounds in the alloyed region and structural refinement. Hardness improvement reduced the wear rate of the surface alloyed layer to almost half of that of the untreated substrate.

  13. The Brittleness Of Zn-Cu-Ti Sheet Alloys

    Directory of Open Access Journals (Sweden)

    Boczkal G.

    2015-09-01

    Full Text Available At temperatures below 5°C, the ductility of ZnCuTi alloy sheets is observed to suffer a drastic drop in direction transverse to the rolling direction. Studies have shown that the critical temperature at which this phenomenon occurs is strongly dependent on the alloy structure and parameters of the sheet metal production process. Quite important is also the role of micro-inhomogeneity arising in the chemical composition of the alloy matrix, directly related with the structure of intermetallic precipitates containing Cu and Ti.

  14. Chemical conversion coating for protecting magnesium alloys from corrosion

    Science.gov (United States)

    Bhargava, Gaurang; Allen, Fred M.; Skandan, Ganesh; Hornish, Peter; Jain, Mohit

    2016-01-05

    A chromate-free, self-healing conversion coating solution for magnesium alloy substrates, composed of 10-20 wt. % Mg(NO.sub.3).sub.2.6H.sub.2O, 1-5 wt. % Al(NO.sub.3).sub.3.9H.sub.2O, and less than 1 wt. % of [V.sub.10O.sub.28].sup.6- or VO.sub.3.sup.- dissolved in water. The corrosion resistance offered by the resulting coating is in several hundreds of hours in salt-spray testing. This prolonged corrosion protection is attributed to the creation of a unique structure and morphology of the conversion coating that serves as a barrier coating with self-healing properties. Hydroxoaluminates form the backbone of the barrier protection offered while the magnesium hydroxide domains facilitate the "slow release" of vanadium compounds as self-healing moieties to defect sites, thus providing active corrosion protection.

  15. Tribological Behaviour of the Ceramic Coating Formed on Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    CHEN Fei; ZHOU Hai; CHEN Qiang; GE Yuanjing; LV Fanxiu

    2007-01-01

    Micro-arc oxidation is a recently developed surface treatment technology under anodic oxidation. Through micro-arc oxidation, a ceramic coating is directly formed on the surface of magnesium alloy, by which its surface property is significantly improved. In this paper, a dense ceramic oxide coating was prepared on an AZ31 magnesium alloy by micro-arc oxidation in a NaOH-Na2SiO3-NaB4O7-(NaPO3)6 electrolytic solution. Micro-structure, surface morphology and phase composition were analysed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The tribological behavior of the micro-arc oxidation ceramic coating under dry sliding against GCrl5 steel was evaluated on a ball-on-disc test rig. The results showed that the AZ31 alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface micro-arc oxidation ceramic coating experienced much abated adhesion wear and scuffing under the same testing conditions. The micro-arc oxidation ceramic coating showed good friction-reducing and fair antiwear ability in dry sliding against the steel.

  16. Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion

    Science.gov (United States)

    Zhang, Xuming; Wu, Guosong; Peng, Xiang; Li, Limin; Feng, Hongqing; Gao, Biao; Huo, Kaifu; Chu, Paul K.

    2015-11-01

    Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based on pre-corrosion by a hydrothermal treatment of Al-enriched Mg alloys in water. A uniform surface composed of an inner compact layer and top Mg-Al layered double hydroxide (LDH) microsheet is produced on a large area using a one-step process and excellent corrosion resistance is achieved in saline solutions. Moreover, inspired by the super-hydrophobic phenomenon in nature such as the lotus leaves effect, the orientation of the top microsheet layer is tailored by adjusting the hydrothermal temperature, time, and pH to produce a water-repellent surface after modification with fluorinated silane. As a result of the trapped air pockets in the microstructure, the super-hydrophobic surface with the Cassie state shows better corrosion resistance in the immersion tests. The results reveal an economical and environmentally friendly means to control and use the pre-corrosion products on magnesium alloys.

  17. Metal Injection Molding (MIM of Magnesium and Its Alloys

    Directory of Open Access Journals (Sweden)

    Martin Wolff

    2016-05-01

    Full Text Available Current research has highlighted that magnesium and its alloys as biodegradable material are highly suitable for biomedical applications. The new material fully degrades into nontoxic elements and offers material properties matching those of human bone tissue. As biomedical implants are rather small and complex in shape, the metal injection molding (MIM technique seems to be well suited for the near net shape mass production of such parts. Furthermore, MIM of Mg-alloys is of high interest in further technical fields. This study focusses on the performance of MIM-processing of magnesium alloy powders. It includes Mg-specific development of powder blending, feedstock preparation, injection molding, solvent and thermal debinding and final sintering. Even though Mg is a highly oxygen-affine material forming a stable oxide layer on each particle surface, the material can be sintered to nearly dense parts, providing mechanical properties matching those of as cast material. An ultimate tensile strength of 142 MPa, yield strength of 67 MPa, elastic modulus of 40 GPa and 8% elongation at fracture could be achieved using novel organic polymer binders for the feedstock preparation. Thus, first implant demonstrator parts could be successfully produced by the MIM technique.

  18. Electrochemical and Optical Properties of Magnesium-Alloy Hydrides Reviewed

    Directory of Open Access Journals (Sweden)

    Thirugnasambandam G. Manivasagam

    2012-10-01

    Full Text Available As potential hydrogen storage media, magnesium based hydrides have been systematically studied in order to improve reversibility, storage capacity, kinetics and thermodynamics. The present article deals with the electrochemical and optical properties of Mg alloy hydrides. Electrochemical hydrogenation, compared to conventional gas phase hydrogen loading, provides precise control with only moderate reaction conditions. Interestingly, the alloy composition determines the crystallographic nature of the metal-hydride: a structural change is induced from rutile to fluorite at 80 at.% of Mg in Mg-TM alloy, with ensuing improved hydrogen mobility and storage capacity. So far, 6 wt.% (equivalent to 1600 mAh/g of reversibly stored hydrogen in MgyTM(1-yHx (TM: Sc, Ti has been reported. Thin film forms of these metal-hydrides reveal interesting electrochromic properties as a function of hydrogen content. Optical switching occurs during (dehydrogenation between the reflective metal and the transparent metal hydride states. The chronological sequence of the optical improvements in optically active metal hydrides starts with the rare earth systems (YHx, followed by Mg rare earth alloy hydrides (MgyGd(1-yHx and concludes with Mg transition metal hydrides (MgyTM(1-yHx. In-situ optical characterization of gradient thin films during (dehydrogenation, denoted as hydrogenography, enables the monitoring of alloy composition gradients simultaneously.

  19. Hot workability of five commercial magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mwembela, A.; McQueen, H.J.; Herba, E.; Sauerborn, M. (Concordia Univ., Montreal, PQ (Canada))

    1998-01-01

    The mechanical forming of Mg alloys can provide products with superior mechanical properties and in certain shapes increased productivity and economy. To assist in optimizing such manufacturing, the hot working characteristics of AZ91, AZ63, AZ31, AZ31-Mn and ZK60 were determined by hot torsion in the range 180-450 C and 0.1-1.0 s[sup -1]. The dependence of the flow stress on temperature and strain rate was determined for the purpose of process modeling for force calculation. A sinh-Arrhenius relationship fitted the data successfully with an activation energy of about 140 kJ/mol similar to that in creep. Similarly, the dependence of the fracture strain was measured to develop temperature-strain-rate maps of the forming limits. In the optical microstructures, twinning was gradually displaced by diffuse slip and dynamic recrystallization as the temperature rose above 300 C in association with the marked rise in ductility. In the observations by TEM with rising temperature, the twins became less sharp and regular as a dynamically recovered substructure more uniformly filled both them and the matrix grains. The variations in dislocation density which led to serrated grain boundaries also gave rise to the dynamic nucleation in their vicinity. the refined grain structure and retained substructure endow the product with strength and toughness. (orig.)

  20. Microstructural Characteristics of High Rate Plastic Deformation in Elektron (trademark) WE43 Magnesium Alloy

    Science.gov (United States)

    2012-04-01

    Microstructural Characteristics of High Rate Plastic Deformation in Elektron ™ WE43 Magnesium Alloy by Joseph Hamilton, Sarah T. Brennan...Ground, MD 21005-5069 ARL-RP-363 April 2012 Microstructural Characteristics of High Rate Plastic Deformation in Elektron ™ WE43 Magnesium...Alloy Joseph Hamilton, Sara T. Brennan, and Yongho Sohn University of Central Florida Bruce Davis and Rick DeLorme Magnesium Elektron North

  1. Positron annihilation lifetime spectroscopy study of roller burnished magnesium alloy

    Directory of Open Access Journals (Sweden)

    Zaleski Radosław

    2015-12-01

    Full Text Available The effect of roller burnishing on Vickers’ hardness and positron lifetimes in the AZ91HP magnesium alloy was studied. The microhardness increases with an increase in the burnishing force and with a decrease in the feed. The comparison of various methods of analysis of positron annihilation lifetime (PAL spectra allowed identification of two components, which are related to solute-vacancy complexes and vacancy clusters, respectively. It was found that the increase in microhardness was related to the increase in the concentration of vacancy clusters.

  2. Mechanical spectroscopy of deformed WE43 magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Lambri, O.A. [Facultad de Ciencias Exactas, Ingenieria y Agrimensura, Universidad Nacional de Rosario, Instituto de Fisica Rosario, CONICET, Avda Pellegrini 250, 2000 Rosario (Argentina); Laboratorio de Materiales, Esc. de Ing. Electrica, FCEIA, UNR (Argentina); Riehemann, W. [Institute of Materials Science and Technology, Clausthal University of Technology, Agricolastrasse 6, D-38678 Clausthal-Zellerfeld (Germany)]. E-mail: werner.riehemann@tu-clausthal.de; Lucioni, E.J. [Laboratorio de Materiales, Esc. de Ing. Electrica, FCEIA, UNR (Argentina); Bolmaro, R.E. [Facultad de Ciencias Exactas, Ingenieria y Agrimensura, Universidad Nacional de Rosario, Instituto de Fisica Rosario, CONICET, Avda Pellegrini 250, 2000 Rosario (Argentina)

    2006-12-20

    Ageing commercial WE43 magnesium alloys at 643 K for various times up to 10,000 s promotes the development of P1 precipitates, which strengthen the matrix. However, overageing causes P2 precipitates, which soften the matrix, to develop. Room temperature plastic deformation of samples aged at 643 K causes (a) the generation of new dislocations and (b) the dissolution of the previously developed strengthening P1 precipitates. These effects are revealed by (a) the decreased micro yield stress, (b) the increased part of the measured internal friction which is independent of the amplitude, and (c) the decreased integrated intensity of the diffraction peak related to P1.

  3. Determination of thermal conductivity of magnesium-alloys

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An indirect method, Angstroms method was adopted and an instrument was designed to determine the thermal conductivity of magnesium metal and alloys. Angstroms method is an axial periodic heat flow technique by which the thermal diffusivity can be measured directly. Then thermal conductivity can be obtained with relation to thermal diffusivity. Compared with the recommended data from the literature the fitted values of the thermal diffiusivity correspond with 3%, and the credible probability of the thermal conductivity in the range of 0-450 ℃ is about 95%. The method is applicable in the given temperature range.

  4. Microstructure and Fatigue Characteristic of AM60B Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    Morteza Mehrzadi

    2012-11-01

    Full Text Available This paper summarizes and reviews the findings of our research on AM60B magnesium alloy conducted in past 8 years. It essentially covers three categories: microstructural study, environmental effect, and fatigue crack growth rate of AM60B. The experimental and numerical studies on the influence of casting defects on this particular material’s properties are reviewed in the first part. It has been shown that the non-uniform solidification of the casting results in variations of the microstructure in different layers (skin and core of the alloy which affects the mechanical properties in those regions. Moreover, the influence of microstructure on fatigue crack initiation and propagation response of the alloy is presented. The influence of several casting defects on the failure mechanism of the material are also numerically analyzed and discussed. The influence of elevated and cold temperatures on the fatigue response of the alloy is reviewed in the second part. Our findings show that the temperature does not have a significant effect on the number of cycles to failure. However, but at some stress level, this effect cannot be dismissed. The fatigue crack growth rate (FCGR response of the alloy at a wide range of stress ratios is also investigated in the last part. The FCGR of the alloy showed a noticeable dependency on the stress ratio. A model is proposed for estimating the FCGR of the alloy, which could provide a good prediction of alloy’s FCGR over a wide range of negative and positive stress ratios. The integrity of the new model is also compared against other models. Finally, the influence of compressive loading on fatigue life of the specimens under constant and random amplitude cyclic loading is investigated experimentally.

  5. Effect of neodymium on the as-extruded ZK20 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    赵亚忠; 潘复生; 彭建; 王维青; 罗素琴

    2010-01-01

    The effect of Nd addition on the microstructure and mechanical properties of ZK20 magnesium alloy was investigated by room tensile test, optical microscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) in order to develop a magnesium alloy with higher ductility. Results showed that the crystal grains of as-extruded ZK20+0.5%Nd magnesium alloy were effectively refined, and the alloy exhibited higher strength and ductility, with the UTS of 237 MPa and the elongation of 32.8%, increasing by 5...

  6. Review of studies on corrosion of magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    ZENG Rong-chang; ZHANG jin; HUANG Wei-jiu; W. DIETZEL; K. U. KAINER; C. BLAWERT; KE Wei

    2006-01-01

    This review provided some recent progress of the research on corrosion mechanisms of magnesium and its alloys and a basis for follow-on research. Galvanic corrosion,pitting corrosion,intergranular corrosion (IGC),filiform corrosion,crevice corrosion,stress corrosion cracking (SCC),and corrosion fatigue (CF) were discussed. The influence of metallurgical factors such as alloying elements,microstructure and secondary phases,processing factors such as heat treatment and weld,and environmental factors including temperature,relative humidity,solution pH values and concentration on corrosion were discussed. In particular,a mechanism of pitting corrosion caused by AlMn particles was proposed. The corrosion properties of AZ91D weld material were investigated.

  7. Rheo-diecasting of AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    XU Jun; LIU Guojun; ZHANG Shaoming; SHI Likai; FAN Zhongyun

    2010-01-01

    A rheo-diecasting process(RDC)was investigated for semisolid processing of an AZ91D magnesium alloy.The results of the RDC samples in as-cast state indicate that the microstructure of primary ct-Mg particles has a fine size,nearly spherical morphology,and uniform distribution throughout the components.Due to the advanced microstructure and reduced level of defects,the RDC AZ91D Mg alloy exhibits an apparent improvement in mechanical properties.The quantitative metallographic investigations reveal that increasing the intensity of forced convection during the slurry preparation results in a promoted nucleation and reduced volume fraction of the primary phase solidified in the slurry makor.

  8. Thermal and structural characteristics of the AM50 magnesium alloy

    Directory of Open Access Journals (Sweden)

    M. Sahoo

    2008-06-01

    Full Text Available Purpose: The goal of this publication is to demonstrate the laboratory metal casting simulation methodology based on controlled melting and solidification experiments. The thermal characteristics of the AM50 magnesium alloy during melting and solidification cycles were determined and correlated with the test samples’ microstructural parameters.Design/methodology/approach: A novel methodology allowed to perform variable solidification rates for stationary test samples. The experiments were performed using computer controlled induction heating and cooling sources using Argon for melt protection and test sample cooling.Findings: Thermal analysis data indicated that the alloy’s melting range was between approximately 434 and 640°C. Increasing the cooling rate from 1 to 4°C/s during solidification process reduced the Secondary Dendrite Arm Spacing from approximately 64 to 43μm. The temperatures of the metallurgical reactions were shifted toward the higher values for faster solidification rates. Fraction liquid curve indicates that at the end of melting of the α(Mg-β(Mg17Al12 eutectic, i.e., 454.2ºC the alloy had a 2% liquid phase.Research limitations/implications: Future research is intended to address the development of a physical simulation methodology representing very high solidification rates used by High Pressure Die Casting (HPDC and to assess the microstructure refinement as a function of solidification rates.Practical implications: Advanced simulation capabilities including non-equilibrium thermal and structural characteristics of the magnesium alloys are required for the development of advanced metal casting technologies like vacuum assisted HPDC and its heat treatment.Originality/value: The presented results point out the direction for future research needed to simulate the alloy solidification in a laboratory environment representing industrial casting processes.

  9. Corrosion Screening of EV31A Magnesium and Other Magnesium Alloys using Laboratory-Based Accelerated Corrosion and Electro-Chemical Methods

    Science.gov (United States)

    2014-07-01

    Corrosion Screening of EV31A Magnesium and Other Magnesium Alloys Using Laboratory-Based Accelerated Corrosion and Electro-chemical Methods...originator. Army Research Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-TR-6899 July 2014 Corrosion Screening of EV31A...Magnesium and Other Magnesium Alloys Using Laboratory-Based Accelerated Corrosion and Electro-chemical Methods Brian E. Placzankis, Joseph P

  10. Microstructural design of magnesium alloys for elevated temperature performance

    Science.gov (United States)

    Bryan, Zachary Lee

    Magnesium alloys are promising for automotive and aerospace applications requiring lightweight structural metals due to their high specific strength. Weight reductions through material substitution significantly improve fuel efficiency and reduce greenhouse gas emissions. Challenges to widespread integration of Mg alloys primarily result from their limited ductility and elevated temperature strength. This research presents a microstructurally-driven systems design approach to Mg alloy development for elevated temperature applications. The alloy properties that were targeted included creep resistance, elevated temperature strength, room temperature ductility, and material cost. To enable microstructural predictions during the design process, computational thermodynamics was utilized with a newly developed atomic mobility database for HCP-Mg. The mobilities for Mg self-diffusion, as well as Al, Ag, Sn, and Zn solute diffusion in HCP-Mg were optimized from available diffusion literature using DICTRA. The optimized mobility database was then validated using experimental diffusion couples. To limit dislocation creep mechanisms in the first design iteration, a microstructure consisting of Al solutes in solid solution and a fine dispersion of Mg2Sn precipitates was targeted. The development of strength and diffusion models informed by thermodynamic predictions of phase equilibria led to the selection of an optimum Mg-1.9at%Sn-1.5at%Al (TA) alloy for elevated temperature performance. This alloy was cast, solution treated based upon DICTRA homogenization simulations, and then aged. While the tensile and creep properties were competitive with conventional Mg alloys, the TA mechanical performance was ultimately limited because of abnormal grain growth that occurred during solution treatment and the basal Mg2Sn particle morphology. For the second design iteration, insoluble Mg2Si intermetallic particles were added to the TA alloy to provide enhanced grain boundary pinning

  11. Formation and characterization of cerium conversion coatings on magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LI Lingjie; LEI Jinglei; YU Shenghai; TIAN Yujing; JIANG Qiquan; PAN Fusheng

    2008-01-01

    Chemical conversion treatment by rare earth metal salt solution was considered as an alternative to chromium chemical conversion treatment to improve the corrosion resistance of magnesium alloys. In this study, cerium conversion coatings formed on AZ31 magnesium alloy were characterized and the formation mechanism was discussed. X-ray photoelectron spectroscopy (XPS) analysis showed that cerium conversion coating consisted of cerium hydroxides/oxides, in which both tetravalent cerium Ce(IV) and trivalent cerium Ce(III) species co-existed. Cerium conversion coating was a two-layer structure. Atomic force microscopy (AFM) images revealed that the morphology of the inside layer was different from that of the outside one, which was responsible for the inherent adhesive weakness of the coating. Corrosion potential (Ecorr) measurements indicated that poor adhesion limited the improvement of the corrosion resistance of the coating. During the treating process, the increased pH value of the cerium salt solution led to the precipitation of cerium hydroxides/oxides. The formation kinetics of the coating followed a parabolic curve.

  12. Constitutive modelling of aluminium alloy sheet at warm forming temperatures

    Science.gov (United States)

    Kurukuri, S.; Worswick, M. J.; Winkler, S.

    2016-08-01

    The formability of aluminium alloy sheet can be greatly improved by warm forming. However predicting constitutive behaviour under warm forming conditions is a challenge for aluminium alloys due to strong, coupled temperature- and rate-sensitivity. In this work, uniaxial tensile characterization of 0.5 mm thick fully annealed aluminium alloy brazing sheet, widely used in the fabrication of automotive heat exchanger components, is performed at various temperatures (25 to 250 °C) and strain rates (0.002 and 0.02 s-1). In order to capture the observed rate- and temperature-dependent work hardening behaviour, a phenomenological extended-Nadai model and the physically based (i) Bergstrom and (ii) Nes models are considered and compared. It is demonstrated that the Nes model is able to accurately describe the flow stress of AA3003 sheet at different temperatures, strain rates and instantaneous strain rate jumps.

  13. Annealing behavior of rolled AZ31 alloy sheet

    Institute of Scientific and Technical Information of China (English)

    PENG Wei-ping; LI Pei-jie; ZENG Pan

    2006-01-01

    The annealed microstructures of the rolled AZ31 alloy sheets were examined by using light optical microscopy. The mechanical properties were measured by tensile testing, with their crystal orientations analyzed by X-ray diffraction (XRD). After the annealing treatment, the elongated grains were transformed to equiaxed grains with uniform and homogeneous structures. The changes of microstructure decreased the yield strength and enhanced the elongation. The analysis of XRD shows that the AZ31 alloy sheet possesses intense basal-texture, which is weakened during the recrystallization while reinforced during the grain growth. The intense basal-texture induces low ductility, which hence makes the further rolling more difficult. The results indicate that the optimum annealing treatment during AZ31 alloys sheet rolling is at about 300 ℃ for 60-120 min.

  14. Corrosion and mechanical properties of AM50 magnesium alloy after being modified by 1 wt.% rare earth element gadolinium

    Institute of Scientific and Technical Information of China (English)

    杨淼; 刘耀辉; 刘家安; 宋雨来

    2014-01-01

    In order to improve the corrosion and mechanical properties of AM50 magnesium alloy, 1 wt.% Gd was used to modify the AM50 magnesium alloy. The microstructure, corrosion and mechanical properties were evaluated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), electrochemical and mechanical stretch methods. The results indicated that β-Mg17Al12 phase decreased and Al2Gd3 and Al0.4GdMn1.6 phase existed after Gd addition. Because of the Gd addition, the grain of AM50 magnesium alloy was refined significantly, which improved the tensile strength of AM50 magnesium al-loy. The decreasing ofβ phase improved the corrosion resistance of the magnesium alloy. The fracture mechanism of the Gd modified AM50 magnesium alloy was quasi-cleavage fracture. The corrosion residual strength (CRS) of AM50 magnesium alloy was im-proved after 1 wt.% Gd addition.

  15. Hot Cracking in AZ31 and AZ61 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    C.J. Huang; C.M. Cheng; C.P. Chou; F.H. Chen

    2011-01-01

    This paper examined the impact of the number of thermal cycles and augmented strain on hot cracking in AZ31 and AZ61 magnesium alloy. Statistical analyses were performed. Following observation using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS) was used for component analysis. Results showed that Al content in magnesium alloy has an effect on hot cracking susceptibility. In addition, the nonequilibrium solidification process produced segregation in Al content, causing higher liquid Mg-alloy rich Al content at grain boundaries, and resulting into liquefied grain boundaries of partially melted zone (PMZ). In summary, under multiple thermal cycles AZ61 produced serious liquation cracking. AZ61 has higher (6 wt%) Al content and produced much liquefied Mg17Al12 at grain boundaries under multiple thermal cycles. The liquefied Mg17Al12 were pulled apart and hot cracks formed at weld metal HAZ due to the augmented strain. Since AZ31 had half the Al content of AZ61, its hot-cracking susceptibility was lower than AZ61. In addition, AZ61 showed longer total crack length (TCL) in one thermal cycle compared to that in three thermal cycles. This phenomenon was possibly due to high-temperature gasification of Al during the welding process, which resulted in lower overall Al content. Consequently, shorter hot cracks exhibited in three thermal cycles. It was found the Al content of AZ31 and AZ61 can be used to assess the hot-cracking susceptibility.

  16. Influence of heat treatment on magnesium alloys meant to automotive industry

    NARCIS (Netherlands)

    Popescu, G.; Moldovan, P.; Bojin, D.; Sillekens, W.H.

    2009-01-01

    The paper presents a study concerning the heat treatment realized on magnesium alloys, from AZ80 and ZK60 class. These alloys are destined to replace the conventional ferrous and aluminum alloys in automotive industry. It was realized the heat treatment, T5 - artificially aging, and it were

  17. Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data

    Directory of Open Access Journals (Sweden)

    Mohammad Mezbahul-Islam

    2014-01-01

    Full Text Available Magnesium-based alloys are becoming a major industrial material for structural applications because of their potential weight saving characteristics. All the commercial Mg alloys like AZ, AM, AE, EZ, ZK, and so forth series are multicomponent and hence it is important to understand the phase relations of the alloying elements with Mg. In this work, eleven essential Mg-based binary systems including Mg-Al/Zn/Mn/Ca/Sr/Y/Ni/Ce/Nd/Cu/Sn have been reviewed. Each of these systems has been discussed critically on the aspects of phase diagram and thermodynamic properties. All the available experimental data has been summarized and critically assessed to provide detailed understanding of the systems. The phase diagrams are calculated based on the most up-to-date optimized parameters. The thermodynamic model parameters for all the systems except Mg-Nd have been summarized in tables. The crystallographic information of the intermetallic compounds of different binary systems is provided. Also, the heat of formation of the intermetallic compounds obtained from experimental, first principle calculations and CALPHAD optimizations are provided. In addition, reoptimization of the Mg-Y system has been done in this work since new experimental data showed wider solubility of the intermetallic compounds.

  18. Calcium orthophosphate coatings on magnesium and its biodegradable alloys.

    Science.gov (United States)

    Dorozhkin, Sergey V

    2014-07-01

    Biodegradable metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Of these metals, magnesium (Mg) and its biodegradable alloys appear to be particularly attractive candidates due to their non-toxicity and as their mechanical properties match those of bones better than other metals do. Being light, biocompatible and biodegradable, Mg-based metallic implants have several advantages over other implantable metals currently in use, such as eliminating both the effects of stress shielding and the requirement of a second surgery for implant removal. Unfortunately, the fast degradation rates of Mg and its biodegradable alloys in the aggressive physiological environment impose limitations on their clinical applications. This necessitates development of implants with controlled degradation rates to match the kinetics of bone healing. Application of protective but biocompatible and biodegradable coatings able to delay the onset of Mg corrosion appears to be a reasonable solution. Since calcium orthophosphates are well tolerated by living organisms, they appear to be the excellent candidates for such coatings. Nevertheless, both the high chemical reactivity and the low melting point of Mg require specific parameters for successful deposition of calcium orthophosphate coatings. This review provides an overview of current coating techniques used for deposition of calcium orthophosphates on Mg and its biodegradable alloys. The literature analysis revealed that in all cases the calcium orthophosphate protective coatings both increased the corrosion resistance of Mg-based metallic biomaterials and improved their surface biocompatibility.

  19. CYCLIC FATIGUE RESISTANCE OF AZ91 MAGNESIUM ALLOY

    Directory of Open Access Journals (Sweden)

    Aneta Němcová

    2009-11-01

    Full Text Available The paper deals with determination of principal mechanical properties and the investigation of fatigue behaviour of AZ91 magnesium alloy. The experimental material was made by squeeze casting technique and heat treated to obtain T4 state (solution annealing, when hard, brittle Mg17Al12 intermetallic phase is dissolved. The basic mechanical properties (Young’s modulus, ultimate tensile strength, yield strength, elongation to fracture and reduction of area were determined by static tensile test. Furthermore, fatigue parameters were investigated. The S-N curve on the basis of smooth test bars tested under symmetrical push-pull loading at room temperature was evaluated. The measured data were subsequently used for fitting with suitable regression functions (Kohout & Věchet and Stromeyer for determination of the fatigue parameters. Fatigue limit sigma-c of the studied alloy for 108 cycles is approaching 50 MPa. In addition, the fracture surfaces were observed by scanning electron microscopy. The failure analysis proved that the striations were observed in fatigue crack propagation area and in the area of static fracture was observed the transgranular ductile fracture. The structure of the studied alloy in the basic state and after heat treatment was observed by light and scanning electron microscopy.

  20. Magnesium alloy AZ63A reinforcement by alloying with gallium and using high-disperse ZrO2 particles

    Directory of Open Access Journals (Sweden)

    J. Khokhlova

    2016-12-01

    Full Text Available The aim of this work was to obtain an experimental magnesium alloy by remelting standard AZ63A alloy with addition of gallium ligatures and ZrO2 particles. This allowed reinforcement of alloy and increase its hardness and Young's modulus. The chemical analysis of this alloy shows two types of structures which are evenly distributed in volume. Thus we can conclude that reinforcing effect is the result of formation of intermetallic phase Mg5-Ga2.

  1. Thermographic Study of Chip Temperature in High-Speed Dry Milling Magnesium Alloys

    Directory of Open Access Journals (Sweden)

    Kuczmaszewski Józef

    2016-06-01

    Full Text Available This paper presents an overview of the state of knowledge on temperature measurement in the cutting area during magnesium alloy milling. Additionally, results of own research on chip temperature measurement during dry milling of magnesium alloys are included. Tested magnesium alloys are frequently used for manufacturing elements applied in the aerospace industry. The impact of technological parameters on the maximum chip temperature during milling is also analysed. This study is relevant due to the risk of chip ignition during the machining process.

  2. Simulation of Magnesium Alloy AZ91D Microstructure Using Modified Cellular Automaton Method

    Institute of Scientific and Technical Information of China (English)

    HUO Liang; LI Bin; SHI Yufeng; XU Qingyan; HAN Zhiqiang; LIU Baicheng

    2009-01-01

    A two-dimensional modified cellular automaton model was developed to simulate the solidification process of magnesium alloy, The stochastic nucleation, solute redistribution, and growth anisotropy effects were taken into account in the present model. The model was used to simulate the grain size of magnesium alloy AZ91D for various cooling rates during the solidification process. To quantitatively validate the current model, metallographic expedments were carded out on specimens obtained from sand mold AZ91D step castings. The metallographic results agree well with the prediction results. The current model can be used to accurately predict the grain sizes of cast AZ91D magnesium alloy.

  3. Corrosion of friction stir welded magnesium alloy AM50

    Energy Technology Data Exchange (ETDEWEB)

    Zeng Rongchang [School of Material Science and Engineering, Chongqing University of Technology, Xingshenglu Rd. 4, Chongqing 400050 (China)], E-mail: rczeng2001@yahoo.com.cn; Chen Jun [School of Material Science and Engineering, Chongqing University of Technology, Xingshenglu Rd. 4, Chongqing 400050 (China); Dietzel, Wolfgang; Zettler, Rudolf; Santos, Jorge F. dos [GKSS-Forschungszentrum Geesthacht GmbH, Max Planck Strasse 1, 21502 Geesthacht (Germany); Lucia Nascimento, M. [Technische Universitaet Berlin, Fachgebiet Werkstofftechnik, Strasse des 17. Juni 135, 10623 Berlin (Germany); Kainer, Karl Ulrich [GKSS-Forschungszentrum Geesthacht GmbH, Max Planck Strasse 1, 21502 Geesthacht (Germany)

    2009-08-15

    The microstructure of a friction stir welded magnesium alloy AM50 was examined by means of optical light microscopy. The chemical composition, particularly the iron content, and morphology of the oxide film were analyzed and discerned via auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). Corrosion behaviour of the welds and base materials were investigated by virtue of neutral salt spray tests and potentiodynamic polarization measurements in conventional cells and in a mini cell. The results demonstrate that minor increases in iron concentration as might be speculated to occur as a consequence of tool/work piece interaction during the welding process on the corrosion resistance of the weld can be ignored. The corrosion morphology was predominantly influenced by the distribution of the Mg{sub 17}Al{sub 12} phase. Here, it was also found that the corrosion resistance of the friction stir weld varied in response to changes in the joint microstructure.

  4. Grain refinement in magnesium alloy AZ31 during hot deformation

    Energy Technology Data Exchange (ETDEWEB)

    Yang Xuyue; Miura, H.; Sakai, T. [Dept. of Mechanical Engineering and Intelligent Systems, Univ. of Electro-Communications, Chofu, Tokyo (Japan)

    2004-07-01

    The deformation behavior and structure changes of magnesium alloy AZ31 were studied in compression at temperatures ranging from 523 K to 673 K and at a strain rate of 3 x 10{sup -3} s{sup -1}. They depend sensitively on deformation temperature. At high temperatures, grain fragmentation takes place due to frequent formation of kink bands initially at corrugated grain boundaries and then in grain interiors, followed by full development of new grains in high strain. At lower temperatures, in contrast, twinning takes place in rather coarse grains and kink bands are formed mainly in finer original ones in low strain. It is concluded that new grain evolution can be controlled by a deformation-induced continuous reaction resulting in grain fragmentation by kink bands, i.e. continuous dynamic recrystallization (cDRX). The latter is discussed comparing with conventional, i.e. discontinuous, DRX. (orig.)

  5. Production of Magnesium and Aluminum-Magnesium Alloys from Recycled Secondary Aluminum Scrap Melts

    Science.gov (United States)

    Gesing, Adam J.; Das, Subodh K.; Loutfy, Raouf O.

    2016-02-01

    An experimental proof of concept was demonstrated for a patent-pending and trademark-pending RE12™ process for extracting a desired amount of Mg from recycled scrap secondary Al melts. Mg was extracted by electrorefining, producing a Mg product suitable as a Mg alloying hardener additive to primary-grade Al alloys. This efficient electrorefining process operates at high current efficiency, high Mg recovery and low energy consumption. The Mg electrorefining product can meet all the impurity specifications with subsequent melt treatment for removing alkali contaminants. All technical results obtained in the RE12™ project indicate that the electrorefining process for extraction of Mg from Al melt is technically feasible. A techno-economic analysis indicates high potential profitability for applications in Al foundry alloys as well as beverage—can and automotive—sheet alloys. The combination of technical feasibility and potential market profitability completes a successful proof of concept. This economical, environmentally-friendly and chlorine-free RE12™ process could be disruptive and transformational for the Mg production industry by enabling the recycling of 30,000 tonnes of primary-quality Mg annually.

  6. The Potential of Magnesium Alloys as Bioabsorbable/ Biodegradable Implants for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    F. Živić

    2014-03-01

    Full Text Available The potential of magnesium alloys as bioabsorbable / biodegradable implants for biomedical applications has been extensively studied as emerging direction. This paper gives a review of current topics in this field. Research activities related to biomedical magnesium alloys have been pursued in two main directions, orthopedic and cardiovascular implants, by investigating different aspects of alloying system design, novel structures, degradation rate control, and surface modification methods. Magnesium alloys are currently considered for applications as load-bearing implant devices such as plates, screws and pins for repairing bone fracture. Highly important direction of research is degradable coronary stents. Degradable vessel stents promote stable vessel regeneration, unlike permanent stents. Different combinations of alloying elements have been investigated in order to decrease corrosion rate.Tribological issues are also important for understanding of different phenomenon related to prolongation of Mg alloys corrosion degradation time/rate, such as tribocorrosion, corrosion fatigue, and fatigue crack growth behavior.

  7. Research and development status of laser cladding on magnesium alloys: A review

    Science.gov (United States)

    Liu, Jianli; Yu, Huijun; Chen, Chuanzhong; Weng, Fei; Dai, Jingjie

    2017-06-01

    Magnesium alloys are one of the most promising lightweight structural materials. However, the poor corrosion and wear resistance restrain their further application. As a kind of surface modification technique, laser cladding treatment is superior to others owing to its unique characteristics such as high efficiency and the metallurgical bonding between the coatings and substrates. In this paper, the laser cladding process and the effects of processing parameters, including laser power, scanning velocity, beam focal position, feeding ways of the material etc., are discussed in detail. The material systems preplaced on magnesium alloys are summarized. Except for the traditional metallic materials, novel ternary alloys, amorphous alloys and high entropy alloys (HEAs) are widely used and apparent advantages are exhibited. In terms of the problems existing in the laser cladding process of magnesium alloys, some potential solutions and the development tendency are reviewed.

  8. Plasma process control for improved PEO coatings on magnesium alloys

    Science.gov (United States)

    Hussein, Riyad Omran

    Plasma Electrolytic Oxidation (PEO) is a high voltage plasma-assisted oxidation process uses an environmentally-friendly aqueous electrolyte to oxidize the metal surfaces to form ceramic oxide coatings which impart a high corrosion and wear resistance. One of the main advantages of PEO process is that it can be applied to treat samples with complex shapes, and surfaces with different composition and microstructure. The PEO process of Mg alloys is strongly influenced by such parameters as electrolyte composition and concentration, current or voltage applied and substrate alloy. Generally, these parameters have a direct influence on the discharging behavior. The discharges play an essential role in the formation and resulting composition of the 3-layer oxide structure. A detailed knowledge of the coating mechanisms is extremely important in order to produce a desired coating quality to reach the best performance of the PEO coatings in terms of corrosion resistance and tribological properties (wear rate, COF). During PEO processing of magnesium, some of the metal cations are transferred outwards from the substrate and react with anions to form ceramic coatings. Also, due to the high electric field in the discharge channels, oxygen anions transfer towards the magnesium substrate and react with Mg2+ cations to form a ceramic coating. Although, in general, PEO coating of Mg alloys produces the three-layered structure, the relative proportions of the three-layers are strongly influenced by the PEO processing parameters. In PEO process, the ceramic coating grows inwards to the alloy substrate and outwards to the coating surface simultaneously. For the coating growth, there are three simultaneous processes taking place, namely the electrochemical, the plasma chemical reactions and thermal diffusion. Optical emission spectroscopy (OES) was employed for the discharge characterization by following the substrate and electrolyte element present in the plasma discharge during the

  9. Preparation of biomimetic hydrophobic coatings on AZ91D magnesium alloy surface

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The hydrophobic coating has been a promising technology for improving surface performance. The surface performance of magnesium alloy has been limited in application. Furthermore, the hydrophobic of magnesium alloy is rarely investigated because magnesium alloy is an active metal alloy. In this paper, inspired by microstructure character of typical plant leaf surface such as lotus, the biomimetic hydrophobic coatings on AZ91D magnesium alloy surface were prepared by means of wet-chemical combining electroless. The samples were immersed into AgNO3 solution in wet-chemical method firstly. Then, biomimetic hydrophobic coatings were prepared by electroless after wet-method pretreatment. The microstructure was observed by SEM and the contact angles were measured by contact angle tester. The results indicated that the biomimetic hydrophobic coatings with uniform crystalline and dense structure could be obtained on AZ91D magnesium alloy surface. The results of contact angle revealed that the biomimetic nano-composite coatings were hydrophobic. The wet-chemical method treatment on the AZ91D magnesium alloy substrate provided a rough microstructure, thus improving adhesion of the coating and the substrate.

  10. In vitro corrosion and biocompatibility study of phytic acid modified WE43 magnesium alloy

    Science.gov (United States)

    Ye, C. H.; Zheng, Y. F.; Wang, S. Q.; Xi, T. F.; Li, Y. D.

    2012-02-01

    Phytic acid (PA) conversion coating on WE43 magnesium alloy was prepared by the method of immersion. The influences of phytic acid solution with different pH on the microstructure, properties of the conversion coating and the corrosion resistance were investigated by SEM, FTIR and potentiodynamic polarization method. Furthermore, the biocompatibility of different pH phytic acid solution modified WE43 magnesium alloys was evaluated by MTT and hemolysis test. The results show that PA can enhance the corrosion resistance of WE43 magnesium especially when the pH value of modified solution is 5 and the cytotoxicity of the PA coated WE43 magnesium alloy is much better than that of the bare WE43 magnesium alloy. Moreover, all the hemolysis rates of the PA coated WE43 Mg alloy were lower than 5%, indicating that the modified Mg alloy met the hemolysis standard of biomaterials. Therefore, PA coating is a good candidate to improve the biocompatibility of WE43 magnesium alloy.

  11. In vitro Degradation and Biocompatibility of Ca-P Coated Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    XIAO Xing; ZHU Qing-san; SU Ying-chao; LI Guang-yu

    2013-01-01

    Calcium-phosphate compounds(Ca-P) coating was prepared on an Mg-Al alloy(AZ60).Biodegradation of Ca-P coated magnesium alloy was evaluated in simulated body fluid(SBF) by examining the changes in magnesium ion concentration and pH value,which indicated that the Ca-P coating on magnesium alloy strongly affected the corrosion of magnesium alloy.Osteoblast MC3T3-El cells were utilized to investigate the cellular cytocompatibility.The cytocompatibility was measured by carrying out a series of tests,such as cholecystokinin-octapeptide(CCK-8) test,alkaline phosphatase activity(ALP) test,cellular morphology of hematoxylin-eosin(HE) staining and the induction of apoptosis.It was found that the cell function showed better in the Ca-P coated Mg-alloy extract than in the uncoated magnesium alloy extract.In summary,the results indicate that the Ca-P coating can improve the corrosion resistance of magnesium alloy and elevate cellular proliferation and differentiation of osteoblast MC3T3-E1 cells.

  12. Ternary Magnesium-Lithium Base Constitution Diagrams and Magnesium Alloys of Low Alloy Additions

    Science.gov (United States)

    1951-03-01

    testing machine using Templin Grips. Strain was measured with a Peters Ex- tensometer in conjunction with a Southwark-Emery stress- strain recorder. The...press. Originally, the equipment was mounted in a South- wark-Emery testing machine having a maximum available force of 50 tons. The equipment was...this development was described in the last Summary Report(l). Experimental work on the original holder machined from a block of aluminum alloy 20 was

  13. Laser Surface Alloying of Copper, Manganese, and Magnesium with Pure Aluminum Substrate

    Science.gov (United States)

    Jiru, Woldetinsay G.; Sankar, M. Ravi; Dixit, Uday S.

    2016-03-01

    Laser surface alloying is one of the recent technologies used in the manufacturing sector for improving the surface properties of the metals. Light weight materials like aluminum alloys, titanium alloys, and magnesium alloys are used in the locomotive, aerospace, and structural applications. In the present work, an experimental study was conducted to improve the surface hardness of commercially pure aluminum plate. CO2 laser is used to melt pre-placed powders of pure copper, manganese, and magnesium. Microstructure of alloyed surface was analyzed using optical microscope. The best surface alloying was obtained at the optimum values of laser parameters, viz., laser power, scan speed, and laser beam diameter. In the alloyed region, microhardness increased from 30 HV0.5 to 430 HV0.5, while it was 60 HV0.5 in the heat-affected region. Tensile tests revealed some reduction in the strength and total elongation due to alloying. On the other hand, corrosion resistance improved.

  14. Magnesium-Nickel alloy for hydrogen storage produced by melt spinning followed by cold rolling

    National Research Council Canada - National Science Library

    Leiva, Daniel Rodrigo; Costa, Hevlin Cristina de Almeida; Huot, Jacques; Pinheiro, Tiago Santos; Jorge Junior, Alberto Moreira; Ishikawa, Tomaz Toshimi; Botta Filho, Walter José

    2012-01-01

    Severe plastic deformation routes (SPD) have been shown to be attractive for short time preparation of magnesium alloys for hydrogen storage, generating refined microstructures and interesting hydrogen storage properties when compared...

  15. Grain refinement of Mg-Al magnesium alloys by carbon inoculation

    Institute of Scientific and Technical Information of China (English)

    WANG Zhao-hui; KANG Yong-lin; ZHAO Hong-jin; XU Yue

    2006-01-01

    C2Cl6 was used as grain refiner for AM60 magnesium alloys. The effects of grain refinement process on chemical composition, microstructure, impact energy, hardness and mechanical properties of magnesium alloys were investigated with XRF spectrometer, optical and electronic microscopes, pendulum impact tester, hardness tester and MTS material testing machine. The results show that C2Cl6 has good effects on microstructure and mechanical properties of AM60 magnesium alloys. The optimum usage of C2Cl6 in AM60 for getting the best properties is 1.0%. The results of electronic microscopic examination and theoretical analyses show that Al4C3 should be the potent heterogeneous nucleant for Mg-Al magnesium alloys.

  16. Nanomechanical and Corrosion Properties of ZK60 Magnesium Alloy Improved by GD Ion Implantation

    Science.gov (United States)

    Tao, Xue Wei; Wang, Zhang Zhong; Zhang, Xiao Bo; Ba, Zhi Xin; Wang, Ya Mei

    2014-09-01

    Gadolinium (Gd) ion implantation with doses from 2.5 × 1016 to 1 × 1017 ions/cm2 into ZK60 magnesium alloy was carried out to improve its surface properties. X-ray photoelectron spectroscopy (XPS), nanoindenter, electrochemical workstation and scanning electron microscope (SEM) were applied to analyze the chemical composition, nanomechanical properties and corrosion characteristics of the implanted layer. The results indicate that Gd ion implantation produces a hybrid-structure protective layer composed of MgO, Gd2O3 and metallic Gd in ZK60 magnesium alloy. The surface hardness and modulus of the Gd implanted magnesium alloy are improved by about 300% and 100%, respectively with the dose of 1 × 1017 ions/cm2, while the slowest corrosion rate of the magnesium alloy in 3.5 wt.% NaCl solution is obtained with the dose of 5 × 1016 ions/cm2.

  17. In vitro studies of biomedical magnesium alloys in a simulated physiological environment: a review.

    Science.gov (United States)

    Xin, Y; Hu, T; Chu, P K

    2011-04-01

    In spite of the immense potential of biodegradable magnesium alloys, the fast degradation rates of Mg-based biomedical implants in the physiological environment impose severe limitations in many clinical applications. Consequently, extensive in vitro studies have been carried out to investigate the materials' performance and fathom the associated mechanisms. Here, an up-to-date review of the in vitro studies on biomedical magnesium alloys in a simulated physiological environment is provided. This review focuses on four topics: (1) materials selection and in vitro biocompatibility of biomedical magnesium alloys; (2) in vitro degradation of biomedical magnesium alloys in simulated physiological environments, specifically discussing corrosion types, degradation rates, corrosion products and impact of the constituents in body fluids on materials degradation; (3) selection of suitable test media for in vitro assessment; and (4) future research trends.

  18. A novel dual nickel coating on AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Magnesium alloys covered with metal coating display excellent corrosion resistance,wear resistance,conductivity and electromagnetic shielding properties.The electroless plating Ni-P as boRom layer following the electroplating nickel as surface layer on AZ91D magnesium alloy was investigated.The coating surface morphology was observed with SEM and the structure was analyzed with XRD.Electrochemical tests and salt spray tests were carried out to study the corrosion resistance.The experimental results indicate that the dual coating is uniform,compact and pore-free.The adhesion strength between magnesium alloy substrate and electroless plating Ni-P bottom layer and electroplating nickel surface layer is perfect.The corrosion resistance of AZ91D magnesium alloy is greatly improved after being protected with the dual coating.

  19. Biodegradable Magnesium Alloys for Orthopaedic Applications: A Review on Corrosion, Biocompatibility and Surface Modifications.

    OpenAIRE

    Agarwal, Sankalp; Curtin, James; Duffy, Brendan; Jaiswal, Swarna

    2016-01-01

    Magnesium (Mg) and its alloys have been extensively explored as potential biodegradable implant materials for orthopaedic applications (e.g. Fracture fixation). However, the rapid corrosion of Mg based alloys in physiological conditions has delayed their introduction for therapeutic applications to date. The present review focuses on corrosion, biocompatibility and surface modifications of biodegradable Mg alloys for orthopaedic applications. Initially, the corrosion behaviour of Mg alloys an...

  20. European Community research on forging of magnesium alloys (MagForge): state of affairs

    NARCIS (Netherlands)

    Sillekens, W.H.; Chevaleyre, F.; Gantar, G.

    2009-01-01

    While the interest in wrought magnesium applications is growing, forging of magnesium alloys in Europe and beyond is still restricted to a few specialized companies that operate for niche markets. Technical matters that relate to this are underdeveloped mechanical properties of available feedstock m

  1. European Community research on forging of magnesium alloys (MagForge): state of affairs

    NARCIS (Netherlands)

    Sillekens, W.H.; Chevaleyre, F.; Gantar, G.

    2009-01-01

    While the interest in wrought magnesium applications is growing, forging of magnesium alloys in Europe and beyond is still restricted to a few specialized companies that operate for niche markets. Technical matters that relate to this are underdeveloped mechanical properties of available feedstock

  2. Torsional and axial damping properties of the AZ31B-F magnesium alloy

    Science.gov (United States)

    Anes, V.; Lage, Y. E.; Vieira, M.; Maia, N. M. M.; Freitas, M.; Reis, L.

    2016-10-01

    Damping properties for the AZ31B-F magnesium alloy were evaluated for pure axial and pure shear loading conditions at room temperature. Hysteretic damping results were measured through stress-strain controlled tests. Moreover, the magnesium alloy viscous damping was measured with frequency response functions and free vibration decay, both results were obtained by experiments. The axial and shear damping ratio (ASDR) has been identified and described, specifically for free vibration conditions.

  3. Corrosion Protection of AM50 Magnesium Alloy by Nafion/DMSO Organic Coatings

    Institute of Scientific and Technical Information of China (English)

    SONG Renguo; ZHENG Xiaohua; BAI Shuju; BLAWERT Carsten; DIETZEL Wolfgang

    2008-01-01

    The effectiveness of the corrosion protection of Nafion/Dimethysulfoxid (DMSO) organic coatings for AM50 magnesium alloy prepared by simple immersion and heat treatment was investigated. Its corrosion resistance and morphologies of the Nafion/DMSO organic coatings were studied by electrochemical corrosion testing and optical microscopy. The results show that Nafion/DMSO organic coatings can improve the corrosion resistance of AM50 magnesium alloy effectively. Also, the corrosion resistance increases with the surface density of the organic coatings.

  4. Portevin-Le Chatelier effect of LA41 magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    WANG Cong; XU Yongbo; HAN Enhou

    2007-01-01

    Uni-axial tensile deformation of LA41 magne-sium alloy has been carried out and the Portevin-Le Chatelier (PLC) effect,also known as serrated flow or plastic instabil-ity,is observed.This kind of alloy exhibits negative strain rate sensitivity (SRS) at room temperature,that is,SRS is negative at the strain rate range from 3.33 ×10-4 to 6.66×10-3 s-1 at ambient temperature Both ultimate stress (σb) and 0.2% proof stress (σ0.2) decrease when strain rate (ε) increases,whilst critical strain (εc) of serrated flow is found to rise with enhancing ε.A new explanation for this unusual phenomenon is presented.The model of dynamic strain aging (DSA) is established through diffusion of solute atoms to mobile dislocations,which are temporarily arrested at obstacles.Such interaction renders the movement of mobile dislocations more difficult so as to neceessitate the required force to overcome the obstacles.

  5. Recrystallization in AZ31 magnesium alloy during hot deformation

    Energy Technology Data Exchange (ETDEWEB)

    Essadiqi, E.; Liu, W.J.; Kao, V. [Natural Resources Canada, Materials Technology Lab., CANMET, Ottawa, ON (Canada); Yue, S. [Dept. of Metallurgical Engineering, McGill Univ., Montreal, PQ (Canada); Verma, R. [General Motors, Materials and Processes Lab, Warren, MI (United States)

    2005-07-01

    In this study, isothermal torsion tests were carried out on magnesium AZ31B alloy under constant strain rate conditions, in the range of 250 to 400 C at 0.01, 0.1, and 1.0 s{sup -1}. Alloy flow stress dependence on strain rate and temperature can be described by a power law with activation energy of 130 kJ/mol. Microstructural examination of hot deformed samples shows very fine recrystallized grains decorating grain boundaries of larger gains in the form of a necklace. These fine grains are produced by dynamic recrystallization at the grain boundaries of original grains. Microstructure evolution, based on samples quenched at different strain levels, indicates that increasing deformation strain has little effect on recrystallized grain size but widens the recrystallized region, with full recrystallization achieved at a certain high strain level. Recrystallized grain size increases with increasing deformation temperature and strain rate. The latter suggests recrystallization in AZ31 to be essentially a time dependant phenomenon. (orig.)

  6. Evaluation of magnesium ions release, biocorrosion, and hemocompatibility of MAO/PLLA-modified magnesium alloy WE42.

    Science.gov (United States)

    Lu, Ping; Cao, Lu; Liu, Yin; Xu, Xinhua; Wu, Xiangfeng

    2011-01-01

    Magnesium alloys may potentially be applied as biodegradable metallic materials in cardiovascular stent. However, the high corrosion rate hinders its clinical application. In this study, a new approach was adopted to control the corrosion rate by fabricating a biocompatible micro-arc oxidation/poly-L-lactic acid (MAO/PLLA) composite coating on the magnesium alloy WE42 substrate and the biocompatibility of the modified samples was investigated. The scanning electronic microscope (SEM) images were used to demonstrate the morphology of the samples before and after being submerged in hanks solution for 4 weeks. The degradation was evaluated through the magnesium ions release rate and electrochemical impedance spectroscopy (EIS) test. The biocompatibility of the samples was demonstrated by coagulation time and hemolysis behavior. The result shows that the poly-L-lactic acid (PLLA) effectively improved the corrosion resistance by sealing the microcracks and microholes on the surface of the MAO coating. The modified samples had good compatibility.

  7. Effect of fiber laser parameters on laser welded AZ31B Magnesium alloys

    Directory of Open Access Journals (Sweden)

    Mat Salleh Naqiuddin

    2017-01-01

    Full Text Available Recently, the usage of Magnesium (Mg alloys has been hugely applied in the industrial application such as in automotive, marine, and electronic due to its advantages of recyclability and lightweight. This alloys required low heat input to be weld since it is easily evaporated due to the Magnesium Oxide (MgO at the surface and it also possesses lower melting point compared to steel. Laser welding is more convenient to weld Mg alloys due to its high power and lower heat input. AZ31B was selected since it has strong mechanical properties among others Mg alloys due to the major alloying elements; Aluminium (Al and Zinc (Zn. Low power fiber laser machine with wavelength of 900 nm was used in this experiment. The intention of this work was to investigate the effect of low power fiber laser parameters and effect of shielding gas on weld penetration and microstructure. Another aim in this work was to produce the joint for this thin sheets metal. Penetration depth and microstructure evaluation were emphasized in the analysis section. Bead-on-Plate (BOP and laser lap welding was conducted on AZ31B with thicknesses of 1.0 mm and 0.6 mm for feasibility study using pulsed wave (PW mode. Defocusing features was used in order to find better focal position, which has less occurrence of evaporation (underfill. The effect of different angle of irradiation was also investigated. Two types of shielding gases, Argon (Ar and Nitrogen (N2 were used in order to study the effect of shielding gas. Lastly, the effect of pulsed energy on penetration types and depth of BOP welded samples was investigated. Focus point was found at focal length of 156 mm with 393.75 μm. For BOP experiment, higher pulsed energy used contributes to melt through defect. Meanwhile, Ns shielding gas proved to be better shielding gas in laser welding the AZ31B. Higher angle of irradiation could reduce the underfill defect. Fillet Lap joint of similar metal was successfully done where 2.0 J of

  8. Lattice softening in body-centered-cubic lithium-magnesium alloys

    Science.gov (United States)

    Winter, I. S.; Tsuru, T.; Chrzan, D. C.

    2017-08-01

    A first-principles investigation of the influence of lattice softening on lithium-magnesium alloys near the body-centered-cubic (bcc)/hexagonal close-packed (hcp) transition composition is presented. Results show that lithium-magnesium alloys display a softening of the shear modulus C11-C12 , and an acoustic phonon branch between the Γ and N high symmetry points, as the composition approaches the stability limit for the bcc phase. This softening is accompanied by an increase in the size of the dislocation core region. Ideal tensile strength calculations predict that ordered phases of lithium-magnesium alloys are intrinsically brittle. Methods to make the alloys more ductile are discussed, and the propensity for these alloys to display gum-metal-like behavior is assessed.

  9. On the Possibility of using Alluminium-Magnesium Alloys with Improved Mechanical Characteristics for Body Elements of Zenit-2S Launch Vehicle Propellant Tanks

    Science.gov (United States)

    Sitalo, V.; Lytvyshko, T.

    2002-01-01

    Yuzhnoye SDO developed several generations of launch vehicles and spacecraft that are characterized by weight perfection, optimal cost, accuracy of output geometrical characteristics, stable strength characteristics, high tightness. The main structural material of launch vehicles are thermally welded non-strengthened aluminium- magnesium alloys. The aluminium-magnesium alloys in the annealed state have insufficiently high strength characteristics. Considerable increase of yield strength of sheets and plates can be reached by cold working but in this case, plasticity reduces. An effective way to improve strength of aluminium-magnesium alloys is their alloying with scandium. The alloying with scandium leads to modification of the structure of ingots (size reduction of cast grain) and formation of supersaturated solid solutions of scandium and aluminium during crystallization. During subsequent heatings (annealing of the ingots, heating for deformation) the solid solution disintegrates with the formation of disperse particles of Al3Sc type, that cause great strengthening of the alloy. High degree of dispersion and density of distribution in the matrix of secondary Al3Sc particles contribute to the considerable increase of the temperature of recrystallization of deformed intermediate products and to the formation of stable non-recrystallized structure. The alloying of alluminium-magnesium alloys with scandium increases their strength and operational characteristics, preserves their technological and corrosion properties, improves weldability. The alloys can be used within the temperature limits ­196-/+150 0C. The experimental structures of propellant tanks made of alluminium-magnesium alloys with scandium have been manufactured and tested. It was ascertained that the propellant tanks have higher margin of safety during loading with internal pressure and higher stability factor of the shrouds during loading with axial compression force which is caused by higher value

  10. Improving Corrosion Resistance and Biocompatibility of Magnesium Alloy by Sodium Hydroxide and Hydrofluoric Acid Treatments

    Directory of Open Access Journals (Sweden)

    Chang-Jiang Pan

    2016-12-01

    Full Text Available Owing to excellent mechanical property and biodegradation, magnesium-based alloys have been widely investigated for temporary implants such as cardiovascular stent and bone graft; however, the fast biodegradation in physiological environment and the limited surface biocompatibility hinder their clinical applications. In the present study, magnesium alloy was treated by sodium hydroxide (NaOH and hydrogen fluoride (HF solutions, respectively, to produce the chemical conversion layers with the aim of improving the corrosion resistance and biocompatibility. The results of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR and X-ray photoelectron spectroscopy (XPS indicated that the chemical conversion layers of magnesium hydroxide or magnesium fluoride were obtained successfully. Sodium hydroxide treatment can significantly enhance the surface hydrophilicity while hydrogen fluoride treatment improved the surface hydrophobicity. Both the chemical conversion layers can obviously improve the corrosion resistance of the pristine magnesium alloy. Due to the hydrophobicity of magnesium fluoride, HF-treated magnesium alloy showed the relative better corrosion resistance than that of NaOH-treated substrate. According to the results of hemolysis assay and platelet adhesion, the chemical surface modified samples exhibited improved blood compatibility as compared to the pristine magnesium alloy. Furthermore, the chemical surface modified samples improved cytocompatibility to endothelial cells, the cells had better cell adhesion and proliferative profiles on the modified surfaces. Due to the excellent hydrophilicity, the NaOH-treated substrate displayed better blood compatibility and cytocompatibility to endothelial cells than that of HF-treated sample. It was considered that the method of the present study can be used for the surface modification of the magnesium alloy to enhance the corrosion resistance and biocompatibility.

  11. Investigation on the Explosive Welding of 1100 Aluminum Alloy and AZ31 Magnesium Alloy

    Science.gov (United States)

    Chen, Pengwan; Feng, Jianrui; Zhou, Qiang; An, Erfeng; Li, Jingbo; Yuan, Yuan; Ou, Sanli

    2016-07-01

    The undesirable properties of magnesium alloys include easy embrittlement, low oxidation resistance, and difficulty in welding with other materials. Their application in industry is, therefore, restricted. In this paper, plates of 1100 aluminum alloy and AZ31 magnesium alloy were successfully welded together using the explosive welding technique. The influences of the welding parameters on the weld quality were investigated. The surface morphology and microstructure near the weld interface were examined by optical microscopy, scanning electron microscopy (equipped with energy-dispersive x-ray spectroscopy), and transmission electron microscopy. The experimental results demonstrated the typical wavy bonding interface. In addition, elemental diffusion with a thickness of approximately 3 μm occurred near the bonding interface. The two plates were joined together well at the atomic scale. Nanograins with a size of approximately 5 nm were observed in the diffusion layer. The microhardness and shear strength were measured to evaluate the mechanical properties, which confirmed that a high quality of bonding was acquired.

  12. Springback analysis on AA 6061 aluminum alloy sheets

    Science.gov (United States)

    Ramulu, Perumalla Janaki; Rao, P. Srinivasa; Yimer, Wassihun

    2016-10-01

    In automotive industry, sheet metal forming process play a key role with respect to economy and weight reduction ratio. In sheet metal forming, one of the operations is bending operation in which sheet will not go under sever deformation. The end components are made by applying the continuous load on the sheet in the bending process. In bending process, elastic limits of materials are exceeded, but flow limit thereof cannot be exceeded. Therefore, the material still keeps a portion of its original flexibility character. When the load is released, the material on forcing compress side tries to enlarge, whereas the material on tensile side tries to shrink. As a result, the material tries to spring back and the bended material by flexing slightly tries to open. Springback varies according to thickness of the material, material and process parameters, type of material, period when punch load stays on the material, dimensions of die, force applied, and bending radius. In order to make bending at a desired angle, springback amounts should be avoided. In the present work, experimentation on AA 6061 alloy sheet springback analysis has done with seven different rolling directions. Results are noted with respect to load, displacement, and die angle on the springback effect. It observed that springback affect is existed notably in the AA 6061 alloys with respect to die angle.

  13. The production of fine grained magnesium alloys through thermomechanical processing for the optimization of microstructural and mechanical properties

    Science.gov (United States)

    Young, John Paul

    The low density and high strength to weight ratio of magnesium alloys makes them ideal candidates to replace many of the heavier steel and aluminum alloys currently used in the automotive and other industries. Although cast magnesium alloys components have a long history of use in the automotive industry, the integration of wrought magnesium alloys components has been hindered by a number of factors. Grain refinement through thermomechanical processing offers a possible solution to many of the inherent problems associated with magnesium alloys. This work explores the development of several thermomechanical processing techniques and investigates their impact on the microstructural and mechanical properties of magnesium alloys. In addition to traditional thermomechanical processing, this work includes the development of new severe plastic deformation techniques for the production of fine grain magnesium plate and pipe and develops a procedure by which the thermal microstructural stability of severely plastically deformed microstructures can be assessed.

  14. Characteristics of magnesium AZ31 alloys subjected to high speed rolling

    Energy Technology Data Exchange (ETDEWEB)

    Su, J., E-mail: jing.su@mail.mcgill.ca [Department of Mining and Materials Engineering, McGill University, 3610 Rue University, Montreal, Quebec H3A 0C5 (Canada); Sanjari, M. [Department of Mining and Materials Engineering, McGill University, 3610 Rue University, Montreal, Quebec H3A 0C5 (Canada); Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita 565-0871 (Japan); Kabir, A.S.H.; Jung, I.-H.; Jonas, J.J.; Yue, S. [Department of Mining and Materials Engineering, McGill University, 3610 Rue University, Montreal, Quebec H3A 0C5 (Canada); Utsunomiya, H. [Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita 565-0871 (Japan)

    2015-06-11

    Magnesium AZ31 alloy sheets were rolled at a high (1000 m/min) and a low (15 m/min) rolling speed. The microstructure and texture evolution were tracked using optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD) techniques. At 100 °C, a total reduction of 72% was achieved in one pass at the high rolling speed, while the sheet fractured at a reduction of only 37% during low speed rolling. In the former case, dynamic recrystallization was observed to be well under way at a reduction of 49% and full recrystallization was achieved at a reduction of 72%. For a given reduction, the maximum intensity of the basal texture is weaker after high speed rolling than after low speed rolling. The far better rollability achieved during high speed rolling is attributed to the activation of slip and dynamic recrystallization at the higher temperatures developed; the weaker texture is due to the activation of a larger number of twinning and slip systems.

  15. Semi-solid metal processing of aluminum alloy A356 and magnesium alloy AZ91: Comparison based on metallurgical consideration

    Energy Technology Data Exchange (ETDEWEB)

    Kleiner, S.; Beffort, O. [Swiss Federal Laboratories for Materials Testing and Research, EMPA Thun, CH-3602 Thun (Switzerland); Ogris, E.; Uggowitzer, P.J. [Institute of Metallurgy, ETH Swiss Federal Institute of Technology, CH-8092 Zuerich (Switzerland)

    2003-09-01

    Thixocasting or rheocasting of AZ and AM magnesium alloys continues to be a problematic case in semi-solid processing. The comparison with the aluminum thixo alloy A356 shows that the metallurgical and physical properties of the Mg alloy AZ91 are little compatible with this technology: The conclusions from this study are of fundamental importance for future developments in this field of research. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  16. A Study of Magnesium-Base Metallic Systems and Development of Principles for Creation of Corrosion-Resistant Magnesium Alloys

    Science.gov (United States)

    Mukhina, I. Yu.

    2014-11-01

    The effect of 26 alloying elements on the corrosion resistance of high-purity magnesium in a 0.5-n solution of sodium chloride and in a humid atmosphere (0.005 n) is studied. The Mg - Li, Mg - Ag, Mg - Zn, Mg - Cu, Mg - Gd, Mg - Al, Mg - Zr, Mg - Mn and other binary systems, which present interest as a base for commercial or perspective castable magnesium alloys, are studied. The characteristics of corrosion resistance of the binary alloys are analyzed in accordance with the group and period of the Mendeleev's periodic law. The roles of the electrochemical and volume factors and of the factor of the valence of the dissolved element are determined.

  17. In vitro biocompatibility and endothelialization of novel magnesium-rare Earth alloys for improved stent applications.

    Directory of Open Access Journals (Sweden)

    Nan Zhao

    Full Text Available Magnesium (Mg based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3-10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future.

  18. Direct Electroless Nickel Plating on AZ91D Magnesium Alloy from a Sulfate Solution and its Deposition Mechanism

    Institute of Scientific and Technical Information of China (English)

    GU Chang-dong; LIAN Jian-she; LI Guang-yu; NIU Li-yuan; JIANG Zhong-hao

    2004-01-01

    A bath of electroless plating Ni on the AZ91D magnesium alloy, containing sulfate nickel, was given in this paper. The nucleation mechanism of Ni-P deposits on the AZ91D magnesium alloy was studied by using XRD and SEM.The electroless Ni-P deposits were preferentially nucleated on the β (Mg17Al12) phase and extended to the primary and eutectic α phases of the AZ91D magnesium alloy.

  19. Direct Electroless Nickel Plating on AZ91D Magnesium Alloy from a Sulfate Solution and its Deposition Mechanism

    Institute of Scientific and Technical Information of China (English)

    GUChang-dong; LIANJian-she; LIGuang-yu; NIULi-yuan; JIANGZhong-hao

    2004-01-01

    A bath of electroless plating Ni on the AZ91D magnesium alloy, containing sulfate nickel, was given in this paper. The nucleation mechanism of Ni-P deposits on the AZ91D magnesium alloy was studied by using XRD and SEM. The electroless Ni-P deposits were preferentially nucleated on the β(Mg17Al12) phase and extended to the primary and eutectic α phases of the AZ91D magnesium alloy.

  20. Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys.

    Science.gov (United States)

    Zhen, Zhen; Liu, Xiaoli; Huang, Tao; Xi, TingFei; Zheng, Yufeng

    2015-01-01

    Good hemocompatibility and cell compatibility are essential requirements for coronary stents, especially for biodegradable magnesium alloy stents, which could change the in situ environment after implanted. In this work, the effects of magnesium ion concentration and pH value on the hemolysis and cytotoxicity have been evaluated. Solution with different Mg(2+) concentration gradients and pH values of normal saline and cell culture media DMEM adjusted by MgCl2 and NaOH respectively were tested for the hemolysis and cell viability. Results show that even when the concentration of Mg(2+) reaches 1000 μg/mL, it has little destructive effect on erythrocyte, and the high pH value over 11 caused by the degradation is the real reason for the high hemolysis ratio. Low concentrations of Mg(2+) (300 μg/mL) could induce obvious death of the L929 cells. The pH of the extract plays a synergetic effect on cytotoxicity, due to the buffer action of the cell culture medium. To validate this conclusion, commercial pure Mg using normal saline and PBS as extract was tested with the measurement of pH and Mg(2+) concentration. Pure Mg leads to a higher hemolysis ratio in normal saline (47.76%) than in buffered solution (4.38%) with different pH values and low concentration of Mg(2+). The Mg extract culture media caused no cytotoxicity, with pH=8.44 and 47.80 μg/mL Mg(2+). It is suggested that buffered solution and dynamic condition should be adopted in the hemolysis evaluation.

  1. Feasibility of Substituting Cerium-Rich Metal by La-Pr-Ce Alloy in Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    伏思静; 赵平

    2004-01-01

    In magnesium alloy ZM3, using cheap Lanthanum-praseodymium-cerium (LPC) rare earth as a substitute for rich-cerium rare earth was studied. The experimental results show that when the adding amount of LPC is between 2.53% and 3.33%, the tensile strength increases as the adding amount of LPC increases; when the amount of RE is 2.53% and 3.33%, the average tensile strength is 142.35, 153.65 MPa respectively. The results show that LPC rare earth replacing rich Ce rare earth is feasible for the tensile strength of ZM3.

  2. Electrochemical Performance Estimation of Anodized AZ31B Magnesium Alloy as Function of Change in the Current Density

    Science.gov (United States)

    Girón, L.; Aperador, W.; Tirado, L.; Franco, F.; Caicedo, J. C.

    2017-08-01

    The anodized AZ31B magnesium alloys were synthesized via electrodeposition processes. The aim of this work was to determine the electrochemical behavior of magnesium alloys by using anodized alloys as a protective coating. The anodized alloys were characterized by x-ray diffraction, exhibiting the crystallography orientation for Mg and MgO phases. The x-ray photoelectron spectroscopy was used to determine the chemical composition of anodized magnesium alloys. By using electrochemical impedance spectroscopy and Tafel curves, it was possible to estimate the electrochemical behavior of anodized AZ31B magnesium alloys in Hank's balanced salt solution (HBSS). Scanning electron microscopy was performed to analyze chemical changes and morphological surface changes on anodized Mg alloys due to the reaction in HBSS/anodized magnesium surface interface. Electrochemical behavior in HBSS indicates that the coatings may be a promising material for biomedical industry.

  3. Forming of magnesium alloy microtubes in the fabrication of biodegradable stents

    Institute of Scientific and Technical Information of China (English)

    Lixiao Wang; Gang Fang; Lingyun Qian; Sander Leeflang; Jurek Duszczyk; Jie Zhou

    2014-01-01

    Magnesium alloys have, in recent years, been recognized as highly promising biodegradable materials, especially for vascular stent applications. Forming of magnesium alloys into high-precision thin-wall tubes has however presented a technological barrier in the fabrication of vascular stents, because of the poor workability of magnesium at room temperature. In the present study, the forming processes, i.e., hot indirect extrusion and multi-pass cold drawing were used to fabricate seamless microtubes of a magnesium alloy. The magnesium alloy ZM21 was selected as a representative biomaterial for biodegradable stent applications. Microtubes with an outside diameter of 2.9 mm and a wall thickness of 0.2 mm were successfully produced at the fourth pass of cold drawing without inter-pass annealing. Dimensional evaluation showed that multi-pass cold drawing was effective in correcting dimensional non-uniformity arising from hot indirect extrusion. Examinations of the microstructures of microtubes revealed the generation of a large number of twins as a result of accumulated work hardening at the third and fourth passes of cold drawing, corresponding to the significantly raised forming forces. The work demonstrated the viability of the forming process route selected for the fabrication of biodegradable magnesium alloy microtubes.

  4. Characterization of Coatings on Steel Self-Piercing Rivets for Use with Magnesium Alloys

    Science.gov (United States)

    McCune, Robert C.; Forsmark, Joy H.; Upadhyay, Vinod; Battocchi, Dante

    Incorporation of magnesium alloys in self-pierce rivet (SPR) joints poses several unique challenges among which are the creation of spurious galvanic cells and aggravated corrosion of adjacent magnesium when coated steel rivets are employed. This work firstly reviews efforts on development of coatings to steel fasteners for the diminution of galvanic corrosion when used with magnesium alloys. Secondly, approaches, based on several electrochemical methods, for the measurement of the galvanic-limiting effect of a number of commercially-available coatings to hardened 10B37 steel self-piercing rivets inserted into alloy couples incorporating several grades of magnesium are reported. Electrochemical impedance spectroscopy (EIS), zero-resistance ammeter (ZRA), corrosion potential and potential-mapping visualization methods (e.g. scanning vibrating electrode technique — SVET) are illustrated for the several rivet coatings considered.

  5. Fatigue behavior of the magnesium alloy ZK60 in high cycle fatigue

    NARCIS (Netherlands)

    Constantinescu, D.M.; Moldovan, P.; Sillekens, W.H.; Sandu, M.; Apostol, D.A.; Miron, M.C.

    2009-01-01

    Not too much information is available in the literature for establishing fatigue properties of magnesium alloys. A compilation of existing fatigue and fatigue crack growth data of different Mg-alloys has been published by ASM International. One can underline that fatigue properties of some of the st

  6. Plasma electrolytic oxidation coating on AZ91 magnesium alloy modified by neodymium and its corrosion resistance

    Science.gov (United States)

    Song, Y. L.; Liu, Y. H.; Yu, S. R.; Zhu, X. Y.; Wang, Q.

    2008-03-01

    Ceramic coatings on the surfaces of Mg-9Al-1Zn (AZ91) magnesium alloy and Mg-9Al-1Zn-1Nd magnesium alloy (AZ91 magnesium alloy modified by neodymium, named as AZ91Nd in this paper) are synthesized in aluminate electrolyte by plasma electrolytic oxidation (PEO) process, respectively. X-ray diffraction and X-ray photoelectron spectroscopy analyses show the PEO coating on the Mg-9Al-1Zn-1Nd alloy comprises not only MgO and Al 2O 3, which are found in the coating on the AZ91 alloy, but also a trace amount of Nd 2O 3. Microstructure observations indicate the addition of Nd can decrease the sizes of β phases and form Al 2Nd intermetallics in the AZ91 alloy. The fine β phases can effectively restrain the formation of unclosed-holes and greatly decrease the sizes of pores in the coating during the PEO process. In addition, the Al 2Nd intermetallics can be completely covered due to the lateral growth of the PEO coatings formed on the α and β phases. As a result, the coating on the AZ91Nd alloy possesses a dense microstructure compared with that on the AZ91 alloy. The following corrosion tests indicate the corrosion resistance of the PEO coating on the AZ91Nd alloy is evidently higher than that of the PEO coating on the AZ91 alloy.

  7. A modified Johnson-Cook constitutive relationship for a rare-earth containing magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    陈道伦; 李德江; 曾小勤

    2013-01-01

    Lightweight magnesium alloy has recently attracted a considerable interest in the automotive and aerospace industries to improve fuel efficiency and reduce CO2 emissions via the weight reduction of vehicles. Rare-earth (RE) element addition can re-markably improve the mechanical properties of magnesium alloys through weakening crystallographic textures associated with the strong mechanical anisotropy and tension-compression yield asymmetry. While the addition of RE elements sheds some light on the alteration in the mechanical anisotropy, available information on the constitutive relationships used to describe the flow behavior of RE-containing magnesium alloys is limited. To establish such a constitutive relationship, uniaxial compressive deformation tests were first conducted on an extruded Mg-10Gd-3Y-0.5Zr (GW103K) magnesium alloy at the strain rates ranging from 1×10-1 to 1×10-4 s-1 at room temperature. A modified Johnson-Cook constitutive equation based on a recent strain hardening equation was proposed to predict the flow stresses of GW103K alloy. Comparisons between the predicted and experimental results showed that the modified Johnson-Cook constitutive equation was able to predict the flow stresses of the RE-containing magnesium alloy fairly accurately with a standard deviation of about 1.8%.

  8. Review of grain refinement methods for as-cast microstructure of magnesium alloy

    Directory of Open Access Journals (Sweden)

    Song Changjiang

    2009-05-01

    Full Text Available As the lightest structural metal, Mg and Mg-based alloys have great potential applications in the aerospace, automotive and nuclear industries. However, such applications have been limited by low ductility and strength. Theoretically, small grain sized structure can synchronously improve its ductility and strength. Yet, universally reliable grain refi nement techniques for the magnesium alloys are still under investigation and some are in strong debating. This paper presents a brief review of development of grain refi nement methods for magnesium alloys, which would contribute to a better understanding of the factors controlling grain refi nement and provide an outlook of future research in this field.

  9. Subsequent yield loci of 5754O aluminum alloy sheet

    Institute of Scientific and Technical Information of China (English)

    WANG Hai-bo; WAN Min; WU Xiang-dong; YAN Yu

    2009-01-01

    Complex loading paths were realized with cruciform specimens and biaxial loading testing machine. Experimental method for determining the subsequent yield locus of sheet metal was established. With this method, the subsequent yield loci of 5754O aluminum alloy sheet were obtained under complex loading paths. Theoretical subsequent yield loci based on Yld2000-2d yield criterion and three kinds of hardening modes were calculated and compared with the experimental results. The results show that the theoretical subsequent yield loci based on mixed hardening mode describe the experimental subsequent yield loci well, whereas isotropic hardening mode, which is widely used in sheet metal forming fields, predicts values larger than the experimental results. Kinematic hardening mode predicts values smaller than the experimental results and its errors are the largest.

  10. Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys

    Directory of Open Access Journals (Sweden)

    Yuanding Huang

    2014-03-01

    Full Text Available The present work investigates the influences of microalloying with rare earths on the mechanical properties of magnesium alloys. The amount of each rare earth element is controlled below 0.4 wt.% in order not to increase the cost of alloy largely. The synergic effects from the multi-microalloying with rare earths on the mechanical properties are explored. The obtained results show that the as-cast magnesium alloys multi-microalloying with rare earths possesses a quite high ductility with a tensile strain up to 25–30% at room temperature. Moreover, these alloys exhibit much better corrosion resistance than AZ31 alloy. The preliminary in situ neutron diffractions on the deformation of these alloys indicate that the multi-microalloying with rare earths seems to be beneficial for the activation of more slip systems. The deformation becomes more homogeneous and the resultant textures after deformation are weakened.

  11. Effects of Alloying Elements on Microstructure and Properties of Magnesium Alloys for Tripling Ball

    Science.gov (United States)

    Xiao, D. H.; Geng, Z. W.; Chen, L.; Wu, Z.; Diao, H. Y.; Song, M.; Zhou, P. F.

    2015-10-01

    In order to find good candidate materials for degradable fracturing ball applications, Mg-Al-Zn-Cu alloys with different contents of aluminum, zinc, and copper were prepared by ingot metallurgy. The effects of aluminum, zinc, and copper additions on the microstructure, compressive strength, and rapid decomposition properties of the alloys have been investigated using scanning electron microscopy, compressive tests, and immersion tests. The results show that the addition of high contents Al (15 to 20 wt pct) in pure magnesium promotes a large number of network-like β-Mg17All2 phases, which helps produce more micro-thermocouples to accelerate the corrosion process in 3 wt pct potassium chloride (KCl) at 366 K (93 °C). Adding different Zn contents improves the compressive properties of Mg-20Al alloys drastically. However, it decreases the decomposition rate in 3 wt pct KCl at 366 K (93 °C). Small amount of Cu will slightly reduce the compressive strength of Mg-20Al-5Zn alloy but dramatically increase its decomposition rate.

  12. A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys

    Directory of Open Access Journals (Sweden)

    Liming Liu

    2014-05-01

    Full Text Available Welding of dissimilar magnesium alloys and aluminum alloys is an important issue because of their increasing applications in industries. In this document, the research and progress of a variety of welding techniques for joining dissimilar Mg alloys and Al alloys are reviewed from different perspectives. Welding of dissimilar Mg and Al is challenging due to the formation of brittle intermetallic compound (IMC such as Mg17Al12 and Mg2Al3. In order to increase the joint strength, three main research approaches were used to eliminate or reduce the Mg-Al intermetallic reaction layer. First, solid state welding techniques which have a low welding temperature were used to reduce the IMCs. Second, IMC variety and distribution were controlled to avoid the degradation of the joining strength in fusion welding. Third, techniques which have relatively controllable reaction time and energy were used to eliminate the IMCs. Some important processing parameters and their effects on weld quality are discussed, and the microstructure and metallurgical reaction are described. Mechanical properties of welds such as hardness, tensile, shear and fatigue strength are discussed. The aim of the report is to review the recent progress in the welding of dissimilar Mg and Al to provide a basis for follow-up research.

  13. Semi-solid slurry of AZ91 magnesium alloy prepared by electromagnetic stirring near liquidus temperature

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    An electromagnetic stirring process near liquidus temperature was designed and demonstrated experimentally to produce semi-solid slurry of AZ91 magnesium alloy, in order to avoid not only contamination from mechanical stirring but also the inflammation of Mg alloy melt at elevated temperature. AZ91 alloy feedstock was isothermally heat treated at 600-610 ℃ for 20 min, and then stirred by electromagnetic field. Globular primary particle characteristic was observed optically in the castings. Mechanical properties were also studied.

  14. Finite Element Based Physical Chemical Modeling of Corrosion in Magnesium Alloys

    Directory of Open Access Journals (Sweden)

    Venkatesh Vijayaraghavan

    2017-03-01

    Full Text Available Magnesium alloys have found widespread applications in diverse fields such as aerospace, automotive, bio-medical and electronics industries due to its relatively high strength-to-weight ratio. However, stress corrosion cracking of these alloys severely restricts their applications in several novel technologies. Hence, it will be useful to identify the corrosion mechanics of magnesium alloys under external stresses as it can provide further insights on design of these alloys for critical applications. In the present study, the corrosion mechanics of a commonly used magnesium alloy, AZ31, is studied using finite element simulation with a modified constitutive material damage model. The data obtained from the finite element modeling were further used to formulate a mathematical model using computational intelligence algorithm. Sensitivity and parametric analysis of the derived model further corroborated the mechanical response of the alloy in line with the corrosion physics. The proposed approach is anticipated to be useful for materials engineers for optimizing the design criteria for magnesium alloys catered for high temperature applications.

  15. Equal Channel Angular Deformation (ECAD) of As-Cast AM60 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Peng LUO; Xiaolin WU; Kenong XIA

    2003-01-01

    As-cast AM60 magnesium alloy ingot with grains coarser than those of as-extruded AZ series is more liable to produce cracks under ECAD with severe shear strain. A feasible scheme of equal channel angular deformation (ECAD) for as-cast AM60 magnesium alloy ingot was proposed in this paper. The tests were conducted on Instron machine with hydraulic back-force machine. Through analysing load vs displacement curves, the effects of ECAD processing conditions on deformability and microstructure of as-cast magnesium AM60 billets were discussed. During testing,the back-force employment was helpful to keep ECAD processing more stable. And with back-force, it was observed that the number of ECAD passes in different routes could tremendously affect the deformability and microstructure of magnesium specimens. It was concluded that ECAD processing is entirely feasible for as-cast magnesium AM60alloy under severe shear strain, and back-force employment, multi-passes deformation and lubrication of graphite paper are the factors primarily beneficial to improvement of deformability and refinement of grained structure. This work provides a way to produce magnesium alloy with fine-grained structure directly from casting ingot by ECAD technique.

  16. Strength and ductility with {10͞11} — {10͞12} double twinning in a magnesium alloy

    Science.gov (United States)

    Lentz, M.; Risse, M.; Schaefer, N.; Reimers, W.; Beyerlein, I. J.

    2016-04-01

    Based on their high specific strength and stiffness, magnesium alloys are attractive for lightweight applications in aerospace and transportation, where weight saving is crucial for the reduction of carbon dioxide emissions. Unfortunately, the ductility of magnesium alloys is usually limited. It is thought that one reason for the lack of ductility is that the development of -- double twins (DTW) cause premature failure of magnesium alloys. Here we show with a magnesium alloy containing 4 wt% lithium, that the same impressively large compression failure strains can be achieved with DTWs as without. The DTWs form stably across the microstructure and continuously throughout straining, forming three-dimensional intra-granular networks, a potential strengthening mechanism. We rationalize that relatively easier slip characteristic of this alloy plastically relaxed the localized stress concentrations that DTWs can generate. This result may provide key insight and an alternative perspective towards designing formable and strong magnesium alloys.

  17. Effects of rare earths on the microarc oxidation of a magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LI Jianzhong; TIAN Yanwen; CUI Zuoxing; HUANG Zhenqi

    2008-01-01

    The effects of rate earths on the properties of the microarc oxidation (MAO) coating on a magnesium alloy were investigated by means of scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and electrochemistry methods.The results show that a nice and compact MAO coating was successfully obtained when the magnesium alloy was treated in nitrate solutions as the pre-treatment of MAO.However,the MAO was not successfully completed for the silicate electrolytes with the addition of rare earths.After the magnesium alloy being treated by rare earth nitrate,the obtained MAO coating has advantages such as uniform distribution of thickness,improved corrosion resistance,and nice-uniform surface,as compared with the untreated magnesium alloy.In addition,the time of non-ESP,the voltage and current density of the MAO process obviously decrease.Cerium oxide doped on the surface of the magnesium alloy can significantly improve the corrosion resistance of the MAO coating and decrease the current density of the MAO process,as compared with lanthanum oxide,whereas the doped rare earths have no significant effect on the components of the MAO coating.

  18. Electroless Ni-P Deposition on Magnesium Alloy from a Sulfate Bath

    Institute of Scientific and Technical Information of China (English)

    LI Guangyu; NIU Liyuan; JIANG Qing; JIANG Zhonghao; LIAN Jianshe

    2008-01-01

    A technology for electroless Ni-P deposition on AZ91D from a low cost plating bath containing sulfate nickel was proposed.The seal pretreatment was employed before the electroless Ni-P deposition for the sake of occluding the micro holes of the cast magnesium alloy and interdicting the bubble formation in the Ni-P coating during plating process.And pickling pretreatment can provide a better adhesion between the Ni-P deposition and AZ91D substrate.The deposition speed of the Ni-P coating is 29 um/h.The technology is employed to AZ91D magnesium alloy automobile parts and can provide high hardness and high wear-resistant.The weight losses of Ni-P plated and heat-treated Ni-P plated magnesium alloy specimen are only about I/6 and 1/10 that of bare magnesium alloy specimen after l0 min abrasion wear,respectively.The hardness of the electroless Ni-P plated brake pedal support brackets is 674.1 VHN and 935.7 VHN after 2 hours heat treatments at 180 C.The adhesion of Ni-P coatings on magnesium alloy substrates meets the demands of ISO Standards 2819.The technology is environment friendly and cannot cause hazard to environment because of absence of chromate in the whole process.

  19. Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath

    Institute of Scientific and Technical Information of China (English)

    LI Guang-yu; NIU Li-yuan; JIANG Zhong-hao; GU Chang-dong; LIAN Jian-she

    2006-01-01

    A bright electroless Ni-P deposition on AM50 magnesium alloy in a sulfate plating bath was proposed by using direct plating process with non-chromate pretreatment. The electroless Ni-P plating on AM50 magnesium alloy has an admirable appearance and good adhesion. The results indicate that the electroless Ni-P deposition with non-chromate pretreatment has better adhesion than that of zinc immersion coating. Anodic polarization curves indicate that the electroless Ni-P deposition obtained from the sulfate bath has similar corrosion-resistance to that obtained from basic nickel carbonate bath. The deposition process generates less pollutant by a non-chromate plating bath and is suitable for the magnesium alloys manufacture because of its low cost. The hardness of the electroless Ni-P plated AM50 is about HV 720.6 and HV 969.7 after heat treatments at 180 ℃ for 2 h. The wear resistance of Ni-P plated magnesium alloy specimens is about 5 to 9 times as high as that of bare magnesium alloys.

  20. Preparation, characterization and wear behavior of carbon coated magnesium alloy with electroless plating nickel interlayer

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Yan [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Li, Zhuguo, E-mail: lizg@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China); Feng, Kai, E-mail: fengkai@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China); Guo, Xingwu [National Engineering Research Center of Light Alloys Net Forming (LAF), School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Zhou, Zhifeng [Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Kowloon, Hong Kong (China); Dong, Jie [National Engineering Research Center of Light Alloys Net Forming (LAF), School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Wu, Yixiong [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China)

    2015-02-01

    Highlights: • The carbon film with nickel interlayer (Ni + C coating) is deposited on GW83. • In Ni + C composite coating the carbon coating has good adhesion with the nickel interlayer. • The wear track of Ni + C coating is narrower compared to the bare one. • The wear resistance of GW83 is greatly improved by the Ni + C coating. - Abstract: Poor wear resistance of rare earth magnesium alloys has prevented them from wider application. In this study, composite coating (PVD carbon coating deposited on electroless plating nickel interlayer) is prepared to protect GW83 magnesium alloys against wear. The Ni + C composite coating has a dense microstructure, improved adhesion strength and hardness due to the effective support of Ni interlayer. The wear test result shows that the Ni + C composite coating can greatly prolong the wear life of the magnesium alloy. The wear track of the Ni + C coated magnesium alloy is obviously narrower and shows less abrasive particles as compared with the bare one. Abrasive wear is the wear mechanism of the coatings at the room temperature. In conclusion, the wear resistance of the GW83 magnesium alloy can be greatly improved by the Ni + C composite coating.

  1. Calcium phosphate coating on magnesium alloy by biomimetic method :Investigation of morphology ,composition and formation process

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Magnesium alloy has similar mechanical properties with natural bone and can degrade via corrosion in the electrolytic environment of the human body.Calcium phosphate has been proven to possess bioactivity and bone inductivity.In order to integrate both advantages,calcium phosphate coating was fabricated on magnesium alloy by a biomimetic method.Supersaturated calcification solutions (SCSs) with different Ca/P ratio and C1- concentration were used as mimetic solutions.The morphology,composition and formation process of the coating were studied with scanning electron microscopy (SEM),energy dispersive spectrometer (EDS),Fourier transformed infrared spectroscopy (FTIR) and X-ray diffraction (XRD).The results show that a uniform calcium phosphate coating was observed on magnesium alloy,the properties of which could be adjusted by the SCSs with different Ca/P ratio.The formation process of the coating was explored by immersing magnesium alloy in SCSs with different Cl- concentration which could adjust the hydrogen production.According to SEM results,the hydrogen bubbles were associated with the formation of grass-like and flower-like coating morphologies.In conclusion,the biomimetic method was effective to form calcium phosphate coating on magnesium alloy and the morphology and composition of the coating could be accommodated by the Ca/P ratio and Cl- concentration in SCSs.

  2. Study on vertical mandibular distraction osteogenesis using magnesium alloy on canine

    Directory of Open Access Journals (Sweden)

    Chengyue Wang

    2014-10-01

    Full Text Available The bone formation feasibility by a novel magnesium alloy device was evaluated using a canine vertical mandibular distraction osteogenesis (DO model. Osteotomies were performed in the area where last 3 star׳s teeth of left mandibular were pulled out before 3 months. Both AZ31 magnesium alloy (n=6 and 316L stainless steel (n=6 distraction devices were implanted. The distraction osteogenesis was carried out with a latency of 5 days after mandibular osteotomy. Distraction proceeded at a rate of 0.3 mm/8 h for 7 days and followed by 4 weeks of consolidations. The evaluations were conducted by scanning electron microscopy (SEM and histological examinations. There were osteoblasts and trabecular bones formations manifestly in both groups. There was no significant difference in the bone mineral density between the two groups. The surface of the magnesium alloy was much more cracked and uneven, resulting from the surface pitting corrosion. The crew nails were closely combined with the surrounding bone tissue. AZ31 magnesium alloy exhibited a certain degradation rate in mandibular and did not post a negative effect on the kidney and liver. The observations in magnesium alloys group is consistent with the stainless steel group.

  3. Study on vertical mandibular distraction osteogenesis using magnesium alloy on canine

    Institute of Scientific and Technical Information of China (English)

    Chengyue Wang; Shufeng Wang; Yusheng Yao; Fuzhai Cui

    2014-01-01

    The bone formation feasibility by a novel magnesium alloy device was evaluated using a canine vertical mandibular distraction osteogenesis (DO) model. Osteotomies were performed in the area where last 3 star's teeth of left mandibular were pulled out before 3 months. Both AZ31 magnesium alloy (n=6) and 316L stainless steel (n=6) distraction devices were implanted. The distraction osteogenesis was carried out with a latency of 5 days after mandibular osteotomy. Distraction proceeded at a rate of 0.3 mm/8 h for 7 days and followed by 4 weeks of consolidations. The evaluations were conducted by scanning electron microscopy (SEM) and histological examinations. There were osteoblasts and trabecular bones formations manifestly in both groups. There was no significant difference in the bone mineral density between the two groups. The surface of the magnesium alloy was much more cracked and uneven, resulting from the surface pitting corrosion. The crew nails were closely combined with the surrounding bone tissue. AZ31 magnesium alloy exhibited a certain degradation rate in mandibular and did not post a negative effect on the kidney and liver. The observations in magnesium alloys group is consistent with the stainless steel group.

  4. In Vivo Corrosion Resistance of Ca-P Coating on AZ60 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Xing Xiao; Haiying Yu; Qingsan Zhu; Guangyu Li; Yang Qu; Rui Gu

    2013-01-01

    Magnesium-based alloys are frequently reported as potential biodegradable orthopedic implant materials.Controlling the degradation rate and mechanical integrity of magnesium alloys in the physiological environment is the key to their applications.In this study,calcium phosphate (Ca-P) coating was prepared on AZ60 magnesium alloy using phosphating technology.AZ60 samples were immersed in a phosphating solution at 37 ± 2 ℃ for 30 min,and the solution pH was adjusted to 2.6 to 2.8 by adding NaOH solution.Then,the samples were dried in an attemperator at 60 ℃.The degradation behavior was studied in vivo using Ca-P coated and uncoated magnesium alloys.Samples of these two different materials were implanted into rabbit femora,and the corrosion resistances were evaluated after 1,2,and 3 months.The Ca-P coated samples corroded slower than the uncoated samples with prolonged time.Significant differences (p < 0.05) in mass losses and corrosion rates between uncoated samples and Ca-P coated samples were observed by micro-computed tomography.The results indicate that the Ca-P coating could slow down the degradation of magnesium alloy in vivo.

  5. Galvanic corrosion of rare earth modified AM50 and AZ91D magnesium alloys coupled to steel and aluminium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mohedano, M.; Arrabal, R.; Pardo, A.; Paucar, A.; Merino, M. C.; Matykina, E.; Mingo, B.; Garces, G.

    2014-04-01

    Electrochemical and gravimetric measurements were used to examine the effects of neodymium and gadolinium additions on the galvanic corrosion behaviour of AM50 and AZ91D magnesium alloys coupled to A 570 Gr 36 carbon steel and AA2011-AA6082 aluminium alloys. Rare earth modified alloys showed Al{sub 2}Nd/Al{sub 2}Gd and Al-Mn-Nd/Al-Mn-Gd intermetallics, reduced area fraction of {beta}-Mg{sub 1}7Al{sub 1}2 phase and increased corrosion resistance due to increased surface passivity and suppression of micro-galvanic couples. Neodymium and gadolinium additions improved the galvanic corrosion resistance of AM50 alloy, but were less effective in case of the AZ91D alloy. The AA6082 alloy was the most compatible material and the AA2011 alloy was the least compatible. (Author)

  6. Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhen, Zhen [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Liu, Xiaoli [School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Huang, Tao [Department of Materials Science and Engineering, State Key Laboratory for Turbulence and Complex System, College of Engineering, Peking University, Beijing 100871 (China); Xi, TingFei, E-mail: xitingfei@pku.edu.cn [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Biomedical Engineering Research Center, Shenzhen Institute, Peking University, Shenzhen 518057 (China); Shenzhen Key Laboratory of Human Tissue Regeneration and Repair, Shenzhen Institute, Peking University, Shenzhen 518057 (China); Zheng, Yufeng [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Department of Materials Science and Engineering, State Key Laboratory for Turbulence and Complex System, College of Engineering, Peking University, Beijing 100871 (China); Shenzhen Key Laboratory of Human Tissue Regeneration and Repair, Shenzhen Institute, Peking University, Shenzhen 518057 (China)

    2015-01-01

    Good hemocompatibility and cell compatibility are essential requirements for coronary stents, especially for biodegradable magnesium alloy stents, which could change the in situ environment after implanted. In this work, the effects of magnesium ion concentration and pH value on the hemolysis and cytotoxicity have been evaluated. Solution with different Mg{sup 2+} concentration gradients and pH values of normal saline and cell culture media DMEM adjusted by MgCl{sub 2} and NaOH respectively were tested for the hemolysis and cell viability. Results show that even when the concentration of Mg{sup 2+} reaches 1000 μg/mL, it has little destructive effect on erythrocyte, and the high pH value over 11 caused by the degradation is the real reason for the high hemolysis ratio. Low concentrations of Mg{sup 2+} (< 100 μg/mL) cause no cytotoxicity to L929 cells, of which the cell viability is above 80%, while high concentrations of Mg{sup 2+} (> 300 μg/mL) could induce obvious death of the L929 cells. The pH of the extract plays a synergetic effect on cytotoxicity, due to the buffer action of the cell culture medium. To validate this conclusion, commercial pure Mg using normal saline and PBS as extract was tested with the measurement of pH and Mg{sup 2+} concentration. Pure Mg leads to a higher hemolysis ratio in normal saline (47.76%) than in buffered solution (4.38%) with different pH values and low concentration of Mg{sup 2+}. The Mg extract culture media caused no cytotoxicity, with pH = 8.44 and 47.80 μg/mL Mg{sup 2+}. It is suggested that buffered solution and dynamic condition should be adopted in the hemolysis evaluation. - Highlights: • Mg{sup 2+} and pH have been tested for hemolysis and cytotoxicity of biomedical Mg. • Even 1000 μg/ml Mg{sup 2+} cannot cause hemolysis, but hemolysis reaches 53.8% when pH > 11. • Mg{sup 2+} > 300 μg/mL induces death of L929 and slight alkaline improves the proliferation. • Pure Mg in normal saline induces high

  7. In-plane anisotropy of 1545 aluminum alloy sheet

    Institute of Scientific and Technical Information of China (English)

    PENG Yong-yi; YIN Zhi-min; YANG Jin; DU Yu-xuan

    2005-01-01

    The microstructures and the tensile mechanical properties in the rolling plane of 1545 aluminum alloy sheet at different orientations with respect to the rolling direction were studied by means of tensile test,X-ray diffractometer(XRD),optical microscope and transmission electron microscope.The in-plane anisotropy of tensile mechanical properties was calculated and the inverse pole figures of the rolling plane,transversal section and longitudinal section were obtained by Harris method.The results show that the 1545 Al alloy sheet has remarkable in-plane anisotropy of mechanical properties and the main texture component is{110}texture.On the basis of the model that regards the sheet containing only{110}texture as a monocrystal,the relationship of in-plane anisotropy and the anisotropy of crystallography was analyzed.The study shows that it is the combined effects of the anisotropy of crystallography and microstructures that cause the in-plane anisotropy of mechanical properties,but the main cause is the crystallographic texture.

  8. Calculation of Liquidus Temperature for Aluminum and Magnesium Alloys Applying Method of Equivalency

    Directory of Open Access Journals (Sweden)

    Mile B. Djurdjević

    2013-01-01

    Full Text Available The purpose of this paper is to develop a mathematical equation, which will be able to accurately predict the liquidus temperature of various aluminum and magnesium cast alloys on the basis of their known chemical compositions. An accurate knowledge of liquidus temperature permits a researcher to predict a variety of physical parameters pertaining to a given alloy. The analytical expressions presented in this paper are based on the “method of equivalency.” According to this concept, the influence of any alloying element on the liquidus temperature of an aluminum and/or magnesium alloy can be translated into the equivalent influence of a reference element. Silicon as a reference element has been chosen for aluminum alloys and aluminum for magnesium alloys. The sum of the equivalent concentrations for other elements, when added to the influence of the actual reference element is used to calculate the liquidus temperature of the alloy. The calculated liquidus temperatures for wide ranges of alloy chemical compositions show a good correlation with corresponding measured liquidus temperatures.

  9. Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site

    Energy Technology Data Exchange (ETDEWEB)

    Willbold, E. [Laboratory for Biomechanics and Biomaterials, Department of Orthopaedic Surgery, Hannover Medical School, Anna-von-Borries-Strasse 1-7, D - 30625 Hannover (Germany); Kaya, A.A. [Mugla University, Engineering Faculty, Metallurgy and Materials Engineering Department, Mugla (Turkey); Kaya, R.A. [MedicalPark Hospital, Kueltuer Sok No:1, 34160 Bahcelievler, Istanbul (Turkey); Beckmann, F. [Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Max-Planck-Str.1, D - 21502 Geesthacht (Germany); Witte, F., E-mail: witte.frank@mh-hannover.de [Laboratory for Biomechanics and Biomaterials, Department of Orthopaedic Surgery, Hannover Medical School, Anna-von-Borries-Strasse 1-7, D - 30625 Hannover (Germany)

    2011-12-15

    The corrosion of biodegradable materials is a crucial issue in implant development. Among other materials, magnesium and magnesium based alloys are one of the most promising candidates. Since the corrosion of biodegradable materials depends on different physiological parameters like pH or ion concentrations, the corrosion might be different in different biological environments. To investigate this issue, we produced screws from magnesium alloy AZ31 and implanted them into the hip bone of 14 sheep. After 3 and 6 months, the screws were explanted and analyzed with synchrotron-radiation based micro-computed tomography and hard tissue histology. We found considerable differences in the corrosion behavior of the magnesium screws with respect to its original tissue location. However, we could detect a normal immunological tissue response.

  10. First-principles study on structural stability of 3d transition metal alloying magnesium hydride

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A first-principles plane-wave pseudopotential method based on the density functional theory was used to investigate the energy and electronic structure of magnesium hydride (MgH2) alloyed by 3d transition metal elements. Through calculations of the negative heat formation of magnesium hydride alloyed by X (X denotes 3d transition metal) element, it is found that when a little X (not including Sc) dissolves into magnesium hydride, the structural stability of alloying systems decreases, which indicates that the dehydrogenation properties of MgH2 can be improved. After comparing the densities of states(DOS) and the charge distribution of MgH2 with or without X alloying, it is found that the improvement for the dehydrogenation properties of MgH2 alloyed by X attributes to the fact that the weakened bonding between magnesium and hydrogen is caused by the stronger interactions between X (not including Cu) and hydrogen. The calculation results of the improvement for the dehydrogenation properties of MgH2-X (X=Ti, V, Mn, Fe, Co,Ni, Cu) systems are in agreement with the experimental results. Hence, the dehydrogenation properties of MgH2 are expected to be improved by addition of Cr, Zn alloying elements.

  11. [Research on the mechanical properties of bone scaffold reinforced by magnesium alloy/bioceramics composite with stereolithography double channels].

    Science.gov (United States)

    Li, Changhai; Lian, Qin; Zhuang, Pei; Wang, Junzhong; Li, Dichen

    2015-02-01

    Focusing on the poor mechanical strength of porous bioceramics bone scaffold, and taking into account of the good mechanical properties of biodegradable magnesium alloy, we proposed a novel method to fabricate magnesium alloy/bioceramics composite bone scaffold with stereolithography double channels. Firstly, a scaffold structure without mutually connected double channels was designed. Then, an optimized bioceramics scaffold was fabricated according to stereolithography and gel-casing. Molten AZ31 magnesium alloy was perfused into the secondary channel of scaffold by low-pressure casting, and magnesium alloy/bioceramics composite bone scaffold was obtained when magnesium alloy was solidified. The compression test showed that the strength of bioceramics scaffold with only one channel and without magnesium alloy was (9.76 ± 0.64) MPa, while the strength of magnesium alloy/bioceramics composite scaffold with double channels was (17.25 ± 0.88) MPa. It can be concluded that the magnesium alloy/bioceramics composite is obviously able to improve the scaffold strength.

  12. Protection against corrosion of magnesium alloys with both conversion layer and sol–gel coating

    OpenAIRE

    2013-01-01

    International audience; The anticorrosion performances of a system consisting of a phosphate based conversion layer and a hybrid sol–gel coating have been evaluated for the magnesium alloy Elektron21. The lone sol–gel coating affords a significant protection of the magnesium substrate. However, the presence of an intermediate conversion layer is presumed to improve the corrosion resistance of the system. The surface morphology of the protection coatings was characterized by optical microscopy...

  13. Diffusion Bonding and Post-Weld Heat Treatment of Extruded AZ91 Magnesium Alloys

    Directory of Open Access Journals (Sweden)

    Fei LIN

    2015-11-01

    Full Text Available The grain size of as-extruded AZ91 magnesium alloys was refined to 12.31 μm from 21.41 μm by recrystallization annealing. The vacuum diffusion welding of as-annealed AZ91 magnesium alloys was researched. The results showed that the maximum shear strength of joints reached 64.70 MPa in the situation of 10 MPa bonding pressure, 18 Pa vacuum degree, 470 °C bonding temperature and 90 min bonding time; both bonding temperature and time are the main influence factors on as-extruded AZ91 magnesium alloys diffusion welding. Then the diffusion welded specimens were annealed, and the shear strength of joints was further improved to 76.93 MPa.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9699

  14. ENVIRONMENTAL FRIENDLY ANODIZING ON AZ91D MAGNESIUM ALLOYS AND COATING CHARACTERISTICS

    Institute of Scientific and Technical Information of China (English)

    A. Saijo; M. Hino; M. Hiramatsu; T. Kanadani

    2005-01-01

    An environmental friendly anodizing treatment (Anomag) from a phosphate-based solution without heavy metals on AZ91D magnesium alloy was studied. The characteristics of the coatings,such as structure, composition and corrosion resistance were investigated. The effects of this anodizing treatment on the mechanical properties were examined. X-ray diffraction (XRD) analysis revealed that the structure of the coatings is amorphous or glassy. In salt spray tests coatings with an average thickness of 10μm had an anticorrosive performance of over 1000 hours. Fatigue tests revealed that anodizing onto AZ91D magnesium alloy does not affect the fatigue strength. These results demonstrate the utility of this anodizing treatment on magnesium alloy for application as a structural material, such as in the automotive field.

  15. Structure and Corrosion Resistance of Microarc Oxidation Coatings on AZ91D Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Cui Shihai; Han Jianmin; Li Weijing; Li Ronghua; Zhu Xiaowen; Wang Jinhua

    2004-01-01

    Magnesium alloys are widely used as shells of 3C (computer, mobile phone and consumer electronics) equipments for its impressive mechanical and physical properties, such as low density, good resistance to electromagnetic radiation, suitable for high pressure diecasting and easily recycling, etc. But poor corrosion resistance confines its extensively application. In this paper, protective coatings was successfully prepared on AZ91D magnesium alloys by micro-arc oxidation (MAO) and painting process. Microstructures and phases of MAO coatings were invesgated with scanning electron microscope (SEM) and X-Ray diffractometer. Mechanical properties of MAO coating, such as adhesive force and corrosion resistance, were also tested. Results showed that MAO coatings were a good base for painting process. MAO coatings with paint have good adhesive properties to base metal and excellent corrosion resistance. Micro-arc oxidation with painting process is a good kind of surface treatment to improve the corrosion resistance of mobile phone shell made of AZ91D magnesium alloys.

  16. Effect of thermal processing on microstructure and mechanical properties of AZ80 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The influences of deformation temperature and deformation degree on the mierostructure and mechanical properties of AZ80 magnesium alloy were investigated by the adoption of isothermal plain strain compression experiment. The results show that thermal compression processing can refine the grain size and the tensile strength of all the deformed AZ80 magnesium alloys is increased to the maximum of 320 MPa. With the increasing of deformation temperature, the tensile strength decreases; with the increasing of the deformation degree, the tensile strength increases significantly in the temperature range of 200-300 ℃ and becomes stable at temperature higher than 300 ℃. During the compression processing of AZ80 magnesium alloys, at lower temperature(300 ℃), dynamic reerystallization is complete and refined grainstrengthening is dominant, leading to little effect of deformation degree on mechanical properties.

  17. Magnetic force improvement and parameter optimization for magnetic abrasive polishing of AZ31 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The magnetic force acting on workpieee to be machined plays a significantly important role in magnetic abrasive polishing process.But in a case of polishing nonferrous materials,the strength of magnetic force is very low and it leads lower polishing efficiency.The magnesium alloy that has superior mechanical properties for industrial application such as a lightweight and high specific strength is one of the most famous nonferrous materials.An improving strategy of the magnetic force for me AZ31 magnesium alloy installed with a permanent magnet was proposed and experimental verification Was carded out.For the proposed strategy,the effect of process parameters on the surface roughness of the AZ31 magnesium alloy Was evaluated by a design of experimental method.

  18. Barium phosphate conversion coating on die-cast AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Poor corrosion resistance limits the application of magnesium alloys.Conversion coating is widely used to protect magnesium alloys because of easy operation and low cost.A novel conversion coating on die.cast AZ91D magnesium alloy containing barium salts was studied.The optimum concentrations of Ba(NO3)2,Mn(NO3)2 and NH4H2PO4 are 25 g/L,15 mL/L and 20 g/L,respectively,based on orthogonal test resulm.The treating time,solution temperature and PH value are settled to be 5-30 min,50-70℃and 2.35-3.0.respectively.The corrosion resistance of barium conversion coating is better than that of manganese-based phosphate conversion coating by immersion test.The coating is composed of Ba,P, O,Mg,Zn,Mn and Al by EDX analysis.

  19. Effects of High Magnetic Field on Solidification and Corrosion Behaviors of Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The solidification behaviors of AZ61 magnesium alloy under a high magnetic field were studied. The corrosion property of AZ61 alloy was investigated in a solution of 3.5 mol/L NaCl by measuring electrochemical polarization. The results show that the high magnetic field can refine microstructure and benefit aluminum transfer.The crystal of α-Mg is induced to orient with their c-axis parallel to the magnetic field. The corrosion studies indicate that different crystal plane of magnesium has different corrosion property. The passivating films on the a- and b-planes have higher corrosion resistance than that on the c-plane. Aligned structure affects the corrosion property of AZ61 magnesium alloy.

  20. A three-dimensional cellular automaton model for simulation of dendritic growth of magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    Mengwu WU; Shoumei XIONG

    2012-01-01

    A numerical model based on the cellular automaton method for the three-dimensional simulation of dendritic growth of magnesium alloy was developed.The growth kinetics was calculated from the complete solution of the transport equations.By constructing a three-dimensional anisotropy model with the cubic CA cells,simulation of dendritic growth of magnesium alloy with six-fold symmetry in the basal plane was achieved.The model was applied to simulate the equiaxed dendritic growth and columnar dendritic growth under directional solidification,and its capability was addressed by comparing the simulated results to experimental results and those in the previously published works.Meanwhile,the three-dimensional simulated results were also compared with that of in two dimensions,offering a deep insight into the microstructure formation of magnesium alloy during solidification.

  1. Evaluation of sliding wear behavior of graphite particle-containing magnesium alloy composites

    Institute of Scientific and Technical Information of China (English)

    QI Qing-ju

    2006-01-01

    The influence of graphite particle content on the friction and wear characteristics of AZ91 magnesium alloy matrix composite was studied. The results show that the wear resistances of graphite-containing composite are much better than those of the matrix under the test conditions. The anti-wear ability of magnesium alloy composite is improved substantially with the increase of the graphite content from 5% to 20%, and both wear mass loss and coefficient of friction are decreased to low level. Different wear mechanisms operate at different sliding stages. A continuous black lubricating film forms progressively on the worn surface along sliding, which effectively limits the direct interaction between the composite tribosurface and the counterpart, and also remarkably delays the transition from mild wear to severe wear for magnesium alloy composite.

  2. Effect of vacuum on solidification process and microstructure of LFC magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LIU Zi-li; LIU Xi-qin; XU Jiang; GUO Hua-ming; PAN Qing-lin; ZHOU Hai-tao

    2006-01-01

    Lost foam casting (LFC) is regarded as a cost-effective, environment-friendly vital option to the conventional casting process for production of near-net shape castings with high quality. Effect of vacuum on the solidification process and microstructure of LFC magnesium alloy were explored. The results indicate that vacuum plays a very important role in the heat transfer during mould filling and solidification periods, it increases the cooling rate of the filling melt, but greatly decreases the cooling rate of the casting during solidification period, and the solidification time of the casting is greater than that without vacuum. The microstructure of LFC magnesium alloy is rather coarse. Compared with that without vacuum, the microstructure of the LFC magnesium alloy under vacuum is more refined and has less precipitated β-phase, which is formed at the grain boundry and around the Al-Mn compound particle.

  3. Preparation of Phytic Acid/Silane Hybrid Coating on Magnesium Alloy and Its Corrosion Resistance in Simulated Body Fluid

    Science.gov (United States)

    Wang, Fengwu; Cai, Shu; Shen, Sibo; Yu, Nian; Zhang, Feiyang; Ling, Rui; Li, Yue; Xu, Guohua

    2017-09-01

    In order to decrease the corrosion rate and improve the bioactivity of magnesium alloy, phytic acid/saline hybrid coatings were synthesized on AZ31 magnesium alloys by sol-gel dip-coating method. It was found that the mole ratio of phytic acid to γ-APS had a great influence on coating morphology and the corresponding corrosion resistance of the coated magnesium alloys. When the mole ratio of phytic acid to γ-APS was 1:1, the obtained hybrid coating was integral and without cracks, which was ascribed to the strong chelate capability of phytic acid and Si-O-Si network derived from silane. Electrochemical test result indicated that the corrosion resistance of the coated magnesium alloy was about 27 times larger than that of the naked counterpart. In parallel, immersion test showed that the phytic acid/silane hybrid coating could induce CaP-mineralized product deposition, which offered another protection for magnesium alloy.

  4. Air cushion furnace technology for heat treatment of high quality aluminum alloy auto body sheet

    Institute of Scientific and Technical Information of China (English)

    Li Yong; Wang Zhaodong; Ma Mingtu; Wang Guodong; Fu Tianliang; Li Jiadong; Liang Xiong

    2014-01-01

    The process characteristics of heat treatment of aluminum alloy auto body sheet and the working prin-ciple of air cushion furnace were introduced. The process position and irreplaceable role of air cushion furnace in the aluminum alloy auto body sheet production was pointed out after the difficulty and key points in the whole production process of auto body sheet were studied. Then the development process of air cushion furnace line of aluminum alloy sheet was reviewed,summarized and divided to two stages. Based on the research of air cushion furnace,the key technology of it was analyzed,then the key points on process,equipment and control models of air cushion furnace for aluminum alloy auto body sheet in future were put forward. With the rapid de-velopment of automotive industry,there will be certainly a new upsurge of research and application of air cush-ion furnace for heat treatment of aluminum alloy auto body sheet.

  5. Section thickness-dependent tensile properties of squeeze cast magnesium alloy AM60

    Directory of Open Access Journals (Sweden)

    Xuezhi Zhang

    2012-05-01

    Full Text Available The development of alternative casting processes is essential for the high demand of light weight magnesium components to be used in the automotive industry, which often contain different section thicknesses. Squeeze casting with its inherent advantages has been approved for the capability of minimizing the gas porosity in magnesium alloys. For advanced engineering design of light magnesium automotive applications, it is critical to understand the effect of section thickness on mechanical properties of squeeze cast magnesium alloys. In this study, magnesium alloy AM60 with different section thicknesses of 6, 10 and 20 mm squeeze cast under an applied pressure of 30 MPa was investigated. The prepared squeeze cast AM60 specimens were tensile tested at room termperature. The results indicate that the mechanical properties including yield strength (YS, ultimate tensile strength (UTS and elongation (A decrease with an increase in section thickness of squeeze cast AM60. The microstructure analysis shows that the improvement in the tensile behavior of squeeze cast AM60 is primarily attributed to the low-gas porosity level and fine grain strucuture which result from the variation of cooling rate of different section thickness. The numerical simulation (Magmasoft? was employed to determine the solidification rates of each step, and the simulated results show that the solidification rate of the alloy decreases with an increase in the section thickness. The computed solidification rates support the experimental observation on grain structural development.

  6. Magnesium Alloy for Repair of Lateral Tibial Plateau Defect in Minipig Model

    Institute of Scientific and Technical Information of China (English)

    Qiang Zhang; Xiao Lin; Zhengrong Qi; Lili Tan; Ke Yang; Zhuangqi Hu; Yan Wang

    2013-01-01

    Bone graft substitutes are widely-studied as alternatives to bone grafts in the clinic.The currently available products are mostly ceramics and polymers.Considerable progress has been made in the study of the biodegradable magnesium alloys,which possess the necessary attributions of a suitable substitute,including an excellent mechanical property.In the present study,a minipig model of a lateral tibial plateau defect was used to evaluate the effectiveness of a magnesium alloy in the repair of a critical-sized defect.The micro-arc oxidation (MAO)-coated ZK60 alloy tablets and medical-grade calcium sulfate pellets were used as the test and control materials,respectively.Bone morphology was monitored by computed tomography after the implantation for 2 and 4 months.It was found that the bone morphology in minipigs following magnesium treatment was similar to that of the normal bone,whereas an abnormal and concave morphology was displayed following the calcium sulfate treatment.The average bone healing rate for the magnesium-treated defects was higher than that of the calcium sulfate-treated defects at the first 4 months following the implantation.Overall,magnesium treatment appeared to improve the defect repair as compared with the calcium sulfate treatment.Thus,the MAO-coated ZK60 alloy appears to be a useful biocompatible bone graft substitute,and further research on its biological activity in vivo is needed.

  7. Interfacial chemistry of organic conversion film on AZ61 magnesium alloy surface

    Science.gov (United States)

    Yang, Xu; Pan, Fusheng; Zhang, Dingfei

    2008-12-01

    The anodic electrochemical behavior of AZ61 magnesium alloy in sodium hydroxide medium in the absence and presence of p-nitro-benzene-azo-resorcinol (PNBAR) was studied using electrochemical techniques. In the presence of PNBAR, organic conversion film formed on the surface of magnesium alloy. The nature of chemical mechanisms, bonds, and structures at the interface of PNBAR/magnesium alloy was investigated by using energy dispersive spectrometer (EDS) analysis and Fourier transform infrared spectroscopy. An in situ electrochemical deposition was evidenced to produce a corrosion protective barrier by the formation of organic conversion film of magnesium-PNBAR complex and to enhance film adhesion by the covalent bonds of Mg sbnd O sbnd N linkage. The linear sweep voltammetry experiments and the score tests were used to investigate the adhesion and evaluate the potential of corrosion resistance of organic conversion film. The results indicated the corrosion resistance of magnesium alloy was improved, the organic conversion film showed excellent adhesion not only to the substrate but also to the outer paint coatings.

  8. A rare-earth free magnesium alloy with improved intrinsic ductility.

    Science.gov (United States)

    Sandlöbes, S; Friák, M; Korte-Kerzel, S; Pei, Z; Neugebauer, J; Raabe, D

    2017-09-05

    Metals are the backbone of manufacturing owing to their strength and formability. Compared to polymers they have high mass density. There is, however, one exception: magnesium. It has a density of only 1.7 g/cm(3), making it the lightest structural material, 4.5 times lighter than steels, 1.7 times lighter than aluminum, and even slightly lighter than carbon fibers. Yet, the widespread use of magnesium is hampered by its intrinsic brittleness. While other metallic alloys have multiple dislocation slip systems, enabling their well-known ductility, the hexagonal lattice of magnesium offers insufficient modes of deformation, rendering it intrinsically brittle. We have developed a quantum-mechanically derived treasure map which screens solid solution combinations with electronic bonding, structure and volume descriptors for similarity to the ductile magnesium-rare earth alloys. Using this insight we synthesized a surprisingly simple, compositionally lean, low-cost and industry-compatible new alloy which is over 4 times more ductile and 40% stronger than pure magnesium. The alloy contains 1 wt.% aluminum and 0.1 wt.% calcium, two inexpensive elements which are compatible with downstream recycling constraints.

  9. Conventional and improved cytotoxicity test methods of newly developed biodegradable magnesium alloys

    Science.gov (United States)

    Han, Hyung-Seop; Kim, Hee-Kyoung; Kim, Yu-Chan; Seok, Hyun-Kwang; Kim, Young-Yul

    2015-11-01

    Unique biodegradable property of magnesium has spawned countless studies to develop ideal biodegradable orthopedic implant materials in the last decade. However, due to the rapid pH change and extensive amount of hydrogen gas generated during biocorrosion, it is extremely difficult to determine the accurate cytotoxicity of newly developed magnesium alloys using the existing methods. Herein, we report a new method to accurately determine the cytotoxicity of magnesium alloys with varying corrosion rate while taking in-vivo condition into the consideration. For conventional method, extract quantities of each metal ion were determined using ICP-MS and the result showed that the cytotoxicity due to pH change caused by corrosion affected the cell viability rather than the intrinsic cytotoxicity of magnesium alloy. In physiological environment, pH is regulated and adjusted within normal pH (˜7.4) range by homeostasis. Two new methods using pH buffered extracts were proposed and performed to show that environmental buffering effect of pH, dilution of the extract, and the regulation of eluate surface area must be taken into consideration for accurate cytotoxicity measurement of biodegradable magnesium alloys.

  10. Parameter prediction in laser bending of aluminum alloy sheet

    Institute of Scientific and Technical Information of China (English)

    Xuyue WANG; Weixing XU; Hua CHEN; Jinsong WANG

    2008-01-01

    Based on the basic platform of BP neural net-works, a BP network model is established to predict the bending angle in the laser bending process of an aluminum alloy sheet (1-2 mm in thickness) and to optimize laser bending parameters for bending control. The sample experimental data is used to train the BP network. The nonlinear regularities of sample data are fitted through the trained BP network; the predicted results include laser bending angles and parameters. Experimental results indi-cate that the prediction allowance is controlled less than 5%-8% and can provide a theoretical and experimental basis for industry purpose.

  11. Electrodeposition of a protective copper/nickel deposit on the magnesium alloy (AZ31)

    Energy Technology Data Exchange (ETDEWEB)

    Huang, C.A. [Department of Mechanical Engineering, Chang Gung University, Taoyuan, Taiwan (China)], E-mail: gfehu@mail.cgu.edu.tw; Wang, T.H. [Department of Mechanical Engineering, Chang Gung University, Taoyuan, Taiwan (China); Weirich, T. [Gemeinschaeftslabor fuer Elektronenmikroskopie, RWTH Aachen (Germany); Neubert, V. [Zentrum fuer Funktionswerkstoe GmbH, Clausthal-Zellerfeld (Germany)

    2008-05-15

    An environmental-friendly Cu electrodeposition process was proposed for the Magnesium alloy (AZ 31). Experimental results show that a good bonding between Cu deposit and Mg alloy surface can be achieved with a pretreatment of galvanostatic etching and then copper electrodeposition in the alkaline copper-sulfate plating bath. Microstructures between Cu deposit and Mg alloy substrate were examined with scanning electron and energy-filtering transmission electron microscopes (SEM and EF-TEM). The Cu-deposited Mg alloy can be further electroplated in acidic Cu and Ni plating baths to acquire a protective Cu/Ni deposit.

  12. Study on the isothermal forging process of MB26 magnesium alloy adaptor

    Directory of Open Access Journals (Sweden)

    Xu Wenchen

    2015-01-01

    Full Text Available The isothermal forging process is an effective method to manufacture complex-shaped components of hard-to-work materials, such as magnesium alloys. This study investigates the isothermal forging process of an MB26 magnesium alloy adaptor with three branches. The results show that two-step forging process is appropriate to form the adaptor forging, which not only improves the filling quality but also reduces the forging load compared with one-step forging process. Moreover, the flow line is distributed along the contour of the complex-shaped adaptor forging.

  13. Conversion Coatings Produced on AZ61 Magnesium Alloy by Low-Voltage Process

    Directory of Open Access Journals (Sweden)

    Nowak M.

    2016-03-01

    Full Text Available The resultes of anodic oxide conversion coatings on wrought AZ61 magnesium alloy production are describe. The studies were conducted in a solution containing: KOH (80 g/l and KF (300 g/l using anodic current densities of 3, 5 and 10 A/dm2 and different process durations. The obtained coatings were examined under a microscope and corrosion tests were performed by electrochemical method. Based on these results, it was found that the low-voltage process produces coatings conferring improved corrosion resistance to the tested magnesium alloy.

  14. Qualitative Research of AZ31 Magnesium Alloy Aircraft Brackets Produced by a New Forging Method

    Directory of Open Access Journals (Sweden)

    Dziubińska A.

    2016-06-01

    Full Text Available The paper reports a selection of numerical and experimental results of a new closed-die forging method for producing AZ31 magnesium alloy aircraft brackets with one rib. The numerical modelling of the new forming process was performed by the finite element method.The distributions of stresses, strains, temperature and forces were examined. The numerical results confirmed that the forgings produced by the new forming method are correct. For this reason, the new forming process was verified experimentally. The experimental results showed good agreement with the numerical results. The produced forgings of AZ31 magnesium alloy aircraft brackets with one rib were then subjected to qualitative tests.

  15. Grain refinement of AZ31 magnesium alloy by electromagnetic stirring under effect of grain-refiner

    Indian Academy of Sciences (India)

    S Y Gao; Q C Le; Z Q Zhang; J Z Cui

    2012-08-01

    The effects of electromagnetic stirring and Al4C3 grain refiner on the grain refinement of semicontinuously cast AZ31 magnesium alloy were discussed in this investigation. The results indicate that electromagnetic stirring has an effective refining effect on the grain size of AZ31 magnesium alloy under the effect of Al4C3 grain refiner. Electromagnetic stirring can `activate’ the Al4C3 particles, resulting in more heterogeneous nucleation sites for the primary -Mg grains. But, longer holding time can `deactivate’ the Al4C3 particles and poison the grain refining effect.

  16. Effect of preparation and test variables on the dissolution kinetics in saline solutions of rapidly solidified and standard magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, D.S. [School of Materials, Univ. of Sheffield (United Kingdom); Edyvean, R.G.J. [School of Materials, Univ. of Sheffield (United Kingdom); Jones, H. [School of Materials, Univ. of Sheffield (United Kingdom); Sellars, C.M. [School of Materials, Univ. of Sheffield (United Kingdom)

    1992-12-31

    Renewed interest in the factors that determine the corrosion characteristics of magnesium alloys has been stimulated of late by the opportunity to provide high strength, corrosion resistant magnesium alloys as ultralight castings and wrought products for automobile and aerospace applications. The present contribution forms part of continuing work at Sheffield to develop improved magnesium alloys by rapid solidification routes. It was motivated by the need to assess the usefulness of dissolution rate, measured during short-term immersion in 3% NaCl solution of rapidly solidified samples, such as splats or ribbons, as a screening parameter to select alloys for full evaluation in scale-up quantities. (orig.)

  17. Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2008-06-01

    Full Text Available Purpose: The aim of this work was to improve the surface layer cast magnesium alloy EN-MCMgAl6Zn1 by laser surface treatment. The purpose of this work was also to determine the laser treatment parameter.Design/methodology/approach: The laser treatment of an EN-MCMgAl6Zn1 magnesium alloy with alloying WC and also TiC powders was carried out using a high power diode laser (HPDL. The resulting microstructure in the modified surface layer was examinated using scanning electron microscopy. Phase composition was determined by the X-ray diffraction method using the XPert device. The measurements of microhardness of the modified surface layer was also studied.Findings: The alloyed region has a fine microstructure with hard carbide particles. Microhardness of laser surface alloyed layer with both TiC and WC particles was significantly improved as compared to alloy without laser treatment.Research limitations/implications: In this research two powders (WC and TiC were used with the particle size over 5µm This investigation presents different speed rates feed by one process laser power.Practical implications: The results obtained in this investigation were promising to compared other conventional processes. High Power Diode Laser can be used as an economical substitute of Nd:YAG and CO2 to improve the surface magnesium alloy by feeding the carbide particles.Originality/value: The originality of this work is applying of High Power Diode Laser for alloying of magnesium alloy using hard particles like tungsten carbide and titanium carbide.

  18. Current research progress in grain refinement of cast magnesium alloys: A review article

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Yahia; Qiu, Dong [School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia); Jiang, Bin; Pan, Fusheng [College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Zhang, Ming-Xing, E-mail: Mingxing.Zhang@uq.edu.au [School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia)

    2015-01-15

    Grain refinement of cast magnesium alloys, particularly in magnesium–aluminium (Mg–Al) based alloys, has been an active research topic in the past two decades, because it has been considered as one of the most effective approaches to simultaneously increase the strength, ductility and formability. The development of new grain refiners was normally based on the theories/models that were established through comprehensive and considerable studies of grain refinement in cast Al alloys. Generally, grain refinement in cast Al can be achieved through either inoculation treatment, which is a process of adding, or in situ forming, foreign particles to promote heterogeneous nucleation rate, or restricting grain growth by controlling the constitutional supercooling or both. But, the concrete and tangible grain refinement mechanism in cast metals is still not fully understood and there are a number of controversies. Therefore, most of the new developed grain refiners for Mg–Al based alloys are not as efficient as the commercially available ones, such as zirconium in non-Al containing Mg alloys. To facilitate the research in grain refinement of cast magnesium alloys, this review starts with highlighting the theoretical aspects of grain refinement in cast metals, followed by reviewing the latest research progress in grain refinement of magnesium alloys in terms of the solute effect and potent nucleants.

  19. Thermodynamic criteria for the removal of impurities from end-of-life magnesium alloys by evaporation and flux treatment

    Directory of Open Access Journals (Sweden)

    Takehito Hiraki, Osamu Takeda, Kenichi Nakajima, Kazuyo Matsubae, Shinichiro Nakamura and Tetsuya Nagasaka

    2011-01-01

    Full Text Available In this paper, the possibility of removing impurities during magnesium recycling with pyrometallurgical techniques has been evaluated by using a thermodynamic analysis. For 25 different elements that are likely to be contained in industrial magnesium alloys, the equilibrium distribution ratios between the metal, slag and gas phases in the magnesium remelting process were calculated assuming binary systems of magnesium and an impurity element. It was found that calcium, gadolinium, lithium, ytterbium and yttrium can be removed from the remelted end-of-life (EoL magnesium products by oxidization. Calcium, cerium, gadolinium, lanthanum, lithium, plutonium, sodium, strontium and yttrium can be removed by chlorination with a salt flux. However, the other elements contained in magnesium alloy scrap are scarcely removed and this may contribute toward future contamination problems. The third technological option for the recycling of EoL magnesium products is magnesium recovery by a distillation process. Based on thermodynamic considerations, it is predicted that high-purity magnesium can be recovered through distillation because of its high vapor pressure, yet there is a limit on recoverability that depends on the equilibrium vapor pressure of the alloying elements and the large energy consumption. Therefore, the sustainable recycling of EoL magnesium products should be an important consideration in the design of advanced magnesium alloys or the development of new refining processes.

  20. Effects of RE on microstructure and properties of AZ91 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    AZ91 magnesium alloy was adopted as master alloy and rare earths (RE) of 1%, 2% and 3% additions wereadded, respectively. The influence of RE on the microstructure was investigated. By casting fluidity spiral specimens, effect of RE on fluidity was achieved. The microhardness of the alloys was tested. By casting specimens in permanent mold,tensile properties of the alloys with different RE addition at ambient and elevated temperatures were studied. The fracturemechanisms of the alloys were studied by SEM. RE additions cause the formation of Al11 RE3 precipitation besides phasechange in the alloys. RE firstly decreases and then increases the fluidity. RE has little influence on ambient temperaturetensile properties but greatly improves high temperature tensile properties at 150 C. Tensile failure of the alloys are mainly brittle cleavage and/or quasi-cleavage fracture

  1. Partial Remelting of Thixotropic Magnesium-Rare Earth Alloy from Near Non- Equilibrium- Liquidus Casting

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    After the investigation on partial remelting of thixotropic magnesium serial alloys (ZK60) by near non-equilibrium liquidus casting (NNLC), the primary solid grains of ZK60-2Ca alloy spheroidized notably during partial remelting processing, however, coarsening and polygonization as occurred holding time prolonged. The refining and globularity of the thixotropic alloys are promoted after further alloyed by Y, RE, Nd and/or Ag, and the results vary with those addition. The remelting structure of ZK60-2Ca-1Y alloy is finer than its base alloy. And the effect of RE, especially Ag, on the refinement of microstructure is notable, but Nd does nothing on it. There is little impact of remelting temperature fluctuation on partial remelted microstructure as holding time in general. On the contrary, it is more sensitive at longer holding time. The quality thixotropic silver-contained alloy can be achieved by remelted partially at 600 ℃ for 10 min.

  2. Influence of Cryogenic Temperatures on the Microstructure and Mechanical Properties of Magnesium Alloys: A Review

    Directory of Open Access Journals (Sweden)

    Hajo Dieringa

    2017-01-01

    Full Text Available Magnesium alloys have been used in the automotive industry and 3C (computer, communication, and consumer electronics for many years. Their room temperature properties combined with their low density offer a wide range of applications, especially when processed by High Pressure Die Casting (HPDC. The use of magnesium alloys at higher temperatures is well-studied; special creep resistant alloys containing the rare earth elements silver or yttrium are needed. However, when it comes to very low temperatures, only a few studies have been performed to determine the property-microstructure relationship. The possible fields of application at low temperatures are aerospace and satellite parts and tanks for liquefied gases. This review shall not only examine mechanical properties at low temperatures, but also the permanent effects of cyclic or long-lasting cryogenic treatment on the microstructure and mechanical properties. It was found that cryogenic treatment is able to influence the precipitate concentration and grain orientation in some magnesium alloys. Reduction in the number of brittle phases is improving ductility in some cases. It is well-known that high speed tool steels, in particular, can be influenced by cryogenic treatment. Whether this is possible with magnesium alloys and what the mechanisms are shall be reviewed.

  3. Effect of cooling rate on microstructure and compressive performance of AZ91 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    YANG Lin; FENG Hui; QIU Ke-qiang; CHEN Li-jia; LIU Zheng

    2006-01-01

    Effect of cooling rate on both microstructure and room temperature compressive performance of the AZ91 magnesium alloy was investigated. The experimental results show that with increasing cooling rate, the quantity of the solid solution phase increases and the fraction of secondary phase Mg17Al12 decreases. The almost single solid solution phase can be obtained with using liquid nitrogen as a coolant. The compressive strengths of the rapid solidified AZ91 magnesium alloys are higher than those of normal cast alloy, and decrease with increasing cooling rate. After artificial aging treatment for 14 h at 168 ℃, the compressive strength of the rapidly solidified AZ91 magnesium alloy cooled in liquid nitrogen increases from 253.5 to 335.3 MPa, while the compressive yield strength increases from 138.1 to 225.91 MPa. The improvement in the compressive strength of the rapidly solidified AZ91magnesium alloys can be attributed to the hardening effect from fine secondary phase.

  4. Microstructure and property of zinc phosphate coating on die-casting magnesium alloy AZ91D

    Institute of Scientific and Technical Information of China (English)

    LI Guang-yu; LIAN Jian-she; NIU Li-yuan; JIANG Zhong-hao

    2006-01-01

    A surface treatment method was described, which can form a uniform and dense phosphate conversion coating on the die -casting magnesium alloy AZ91D in a non-chromate and non-nitrite bath. The coating consists of Zn3(PO4)2-4H2O, Zn, AlPO4 and MgZn2(PO4)2 analyzed by XRD. The SEM results show that the microstructure of the zinc phosphate coating transfers from flower-like to slab-like crystals with the increase of immersion time of magnesium alloy samples in the phosphating bath. The zinc phosphate coating formed in the bath with immersion time of 1 min is denser because metallic Zn and insoluble phosphate crystals co-deposit on the magnesium alloy surface and the growth of the crystals are restricted by each others. The zinc phosphate coating on the magnesium alloy is used as the base layer for further cataphoric and powder paintings. The cataphoric painting on AZ91D alloy based on phosphate coating has similar adhesion and corrosion-resistance to that based on the chromate conversion coating. But for powder painting, the former exhibits better adhesion property than the latter, due to the uneven microstructure and the enough thickness of the phosphate coating.

  5. Quantitative procedure for evaluation of microstructure of cast Mg-Al-Ca-Sr magnesium alloy

    Directory of Open Access Journals (Sweden)

    T. Rzychoń

    2010-01-01

    Full Text Available In this paper the microstructural characterization of ingot MRI-230D magnesium alloy and quantitative procedure for evaluation of microstructure are presented. The optical and scanning electron microscopy were used to study the morphology of microstructural compounds in this alloy. The X-ray diffraction was used to determination of phase composition. The as-cast microstructure of MRI-230D magnesium alloy containing aluminum, calcium and strontium consists of the dendritic α-Mg and such intermetallic compounds as: Al2Ca, Al4Sr and AlxMny. In the purpose quantitative description of microstructure semi-automatic procedures using Met-Ilo image analysis were developed. Prepared semi-automatic procedures allow a fast determination of phase content in MRI-230D alloy using light microscopy and will be useful in the quality control of MRI-230D ingots.

  6. Preparation of semi-solid billet of magnesium alloy and its thixoforming

    Institute of Scientific and Technical Information of China (English)

    JIANG Ju-fu; LUO Shou-jing

    2007-01-01

    Preparation of semi-solid billet of magnesium alloy and thixoforming was investigated by applying equal channel angular extrusion to magnesium alloy. The results show that mechanical properties of AZ91D alloy at room temperature, such as yield strength(YS), ultimate tensile strength(UTS) and elongation, are enhanced greatly by four-pass equal channel angular extrusion(ECAE) at 573 K and microstructure of AZ91D alloy is refined to the average grain size of 20 μm. Through using ECAE as strain induced step in SIMA and completing melt activated step by semi-solid isothermal treatment, semi-solid billet with fine spheroidal grains of 25 μm can be prepared successfully. Compared with common SIMA, thixoformed satellite angle frame components using semi-solid billet prepared by new SIMA have higher mechanical properties at room temperature and high temperature of 373 K.

  7. Microstructure and mechanical properties of Mg-6Al magnesium alloy with yttrium and neodymium

    Directory of Open Access Journals (Sweden)

    Chen Jun

    2009-05-01

    Full Text Available The effects of rare earth (RE elements Y and Nd on the microstructure and mechanical properties of Mg-6Al magnesium alloy were investigated. The results show that a proper level of RE elements can obviously refi ne the microstructure of Mg-6Al magnesium alloys, reduce the quantity of β-Mg17Al12 phase and form Al2Y and Al2Nd phases. The combined addition of Y and Nd dramatically enhances the tensile strength of the alloys in the temperature range of 20-175℃. When the content of RE elements is up to 1.8%, the values of tensile strength at room temperature and at 150℃ simultaneously reach their maximum of 253 MPa and 196 MPa, respectively. The main mechanisms of enhancement in the mechanical properties of Mg-6Al alloy with Y and Nd are the grain refi ning strengthening and the dispersion strengthening.

  8. Effects of RE on Microstructures and Mechanical Properties of Hot-Extruded AZ31 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    刘英; 陈维平; 张卫文; 张大童; 李元元

    2004-01-01

    Effects of rare earth (RE) additions on microstructure and mechanical properties of the wrought AZ31 magnesium alloy were investigated. The results show that, by adding 0.3%, 0.6% and 1.0% RE elements, the as-cast microstructure can be refined, and the as-cast alloys′ elongation and tensile strength can be improved. After extrusion, the alloy with 0.3% and 0.6% RE additions obtain a finer microstructure and the best mechanical properties, but the alloy with 1.0% RE addition has the coarse Al-RE compound particles in grain boundaries which decreased elongation and tensile properties. Usually, Rare earth (RE) elements were used to improve the creep properties of aluminium-containing magnesium pressure die cast alloys at elevated temperatures. In this paper, it is also found that the high temperature strength of extruded materials can be increased by RE elements additions.

  9. Ceramic coated Y1 magnesium alloy surfaces by microarc oxidation process for marine applications

    Indian Academy of Sciences (India)

    V V Narulkar; S Prakash; K Chandra

    2007-08-01

    The magnesium alloys occupy an important place in marine applications, but their poor corrosion resistance, wear resistance, hardness and so on, have limited their application. To meet these defects, some techniques are developed. Microarc oxidation is a one such recently developed surface treatment technology under anodic oxidation in which ceramic coating is directly formed on the surface of magnesium alloy, by which its surface property is greatly improved. In this paper, a dense ceramic oxide coating, ∼ 20 m thick, was prepared on an Y1 magnesium alloy through microarc oxidation in a Na3SiO3–Na2WO4–KOH–Na2EDTA electrolytic solution. The property of corrosion resistance of ceramic coating was studied by CS300P electrochemistry–corrosion workstation, and the main impact factor of the corrosion resistance was also analysed. Microstructure and phase composition were analysed by SEM and XRD. The microhardness of the coating was also measured. The basic mechanism of microarc coating formation is explained in brief. The results show that the corrosion resistance property of microarc oxidation coating on the Y1 magnesium surface is superior to the original samples in the 3.5 wt% NaCl solutions. The microarc oxidation coating is relatively dense and uniform, mainly composed of MgO, MgAl2O4 and MgSiO3. The microhardness of the Y1 magnesium alloy surface attained 410 HV, which was much larger than that of the original Y1 magnesium alloy without microarc oxidation.

  10. SHOT PEENING INFLUENCE ON CORROSION RESISTANCE OF AE21 MAGNESIUM ALLOY

    OpenAIRE

    Branislav Hadzima; Michal Bukovina; Pavel Doležal

    2010-01-01

    Evaluation of the electrochemical characteristics of the AE21 magnesium alloy is presented in the article. The surfaces of tested alloys were treated by grinding and grinding followed by sodium bicarbonate shot-peening. The specimens were evaluated by electrochemical impedance spectroscopy method in combination with exposure tests in 0.1 NaCl solution. The exposition times were from 5 minutes to 168 hours. The measured data were analysed using equivalent circuits and polarization resistances ...

  11. New approaches for rare earth-magnesium based hydrogen storage alloys

    Directory of Open Access Journals (Sweden)

    Huaiwei Zhang

    2017-02-01

    Full Text Available As the most possibility applied to the next generation negative electrode materials of Ni/ MH second battery, rare earth (RE-magnesium (Mg based alloys have been developed over the last few years. Recent advances about the RE-Mg based intermetallic compounds on the crystal structures, hydrogenation behaviors and electrochemical performances are reviewed in the paper. On the other hand, new results about the preparation and modification methods of the alloys are also covered in details.

  12. 锑合金化在镁合金中的应用%Application of Antimony Alloying in Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    丛孟启; 刘劲松; 李子全; 闫明阳; 孙颖迪; 黄敏; 陈可; 刘亚妮

    2012-01-01

    The latest research progress in magnesium alloys containing antimony in recent years is discussed Effects of antimony additions on the cast-ability, microstructure, tensile properties, creep behavior, damping properties and corrosion resistance of Mg-Al and Mg-Zn based alloys are summarized. Finally, some further research orientations of magnesium alloys containing Sb in the present study are suggested.%综述了近年来含锑镁合金的研究进展,总结了锑元素对Mg-Al和Mg-Zn系镁合金铸造性能、金相组织、力学性能、蠕变性能、阻尼性能、耐蚀性能6方面的影响.最后,展望了含锑镁合金的研究方向.

  13. Rapid coating of AZ31 magnesium alloy with calcium deficient hydroxyapatite using microwave energy

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Yufu, E-mail: Yufu.Ren@rockets.utoledo.edu [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Zhou, Huan [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Institute of Biomedical Engineering and Health Sciences, Changzhou University, Changzhou, Jiangsu (China); Nabiyouni, Maryam [Department of Bioengineering, The University of Toledo, Toledo, OH (United States); Bhaduri, Sarit B. [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Division of Dentistry, The University of Toledo, Toledo, OH (United States)

    2015-04-01

    Due to their unique biodegradability, magnesium alloys have been recognized as suitable metallic implant materials for degradable bone implants and bioresorbable cardiovascular stents. However, the extremely high degradation rate of magnesium alloys in physiological environment has restricted its practical application. This paper reports the use of a novel microwave assisted coating technology to improve the in vitro corrosion resistance and biocompatibility of Mg alloy AZ31. Results indicate that a dense calcium deficient hydroxyapatite (CDHA) layer was uniformly coated on a AZ31 substrate in less than 10 min. Weight loss measurement and SEM were used to evaluate corrosion behaviors in vitro of coated samples and of non-coated samples. It was seen that CDHA coatings remarkably reduced the mass loss of AZ31 alloy after 7 days of immersion in SBF. In addition, the prompt precipitation of bone-like apatite layer on the sample surface during immersion demonstrated a good bioactivity of the CDHA coatings. Proliferation of osteoblast cells was promoted in 5 days of incubation, which indicated that the CDHA coatings could improve the cytocompatibility of the AZ31 alloy. All the results suggest that the CDHA coatings, serving as a protective layer, can enhance the corrosion resistance and biological response of magnesium alloys. Furthermore, this microwave assisted coating technology could be a promising method for rapid surface modification of biomedical materials. - Highlights: • A microwave assisted coating process for biodegradable Mg alloy. • CDHA coatings were successfully developed on AZ31 alloy in minutes. • The as-deposited CDHA coatings significantly reduced the degradation rate of AZ31 alloy. • The CDHA coated AZ31 alloy showed good bioactivity and biocompatibility in vitro. • The microwave assisted coating process can be used as rapid surface modification for bioimplants.

  14. An in vitro study on the biocompatibility of WE magnesium alloys.

    Science.gov (United States)

    Ge, Shuping; Wang, Yi; Tian, Jie; Lei, Daoxi; Yu, Qingsong; Wang, Guixue

    2016-04-01

    Magnesium alloys are being actively studied for intravascular stent applications because of their good mechanical strength and biocompatibility. To rule out the high allergenicity of nickel and neurotoxicity of aluminum element, four kinds of WE magnesium alloys (where "W" represents the metallic element Y and "E" represents mixed rare earth (RE) elements; Y: 2.5, 5.0, 6.5, and 7.5 wt %; Nd: 1.0, 2.6, 2.5, and 4.2 wt %; Zr: 0.8 wt %) were chosen for in vitro investigation of their biocompatibility using cell culture. The results showed that, with the increase of rare earth elements in WE magnesium alloys, fibrinogen adsorption decreased and coagulation function was improved. It was also found that WE magnesium alloys promoted the adhesion of endothelial cells. With the increase of adhesion time, adhered cell numbers increased gradually. With 25% extracts, all the WE alloys promoted cell migration, while 100% extracts were not conducive to cell migration. Based on the above results, WE magnesium alloys 5.0WE (5.0Y-2.6Nd-0.8Zr) and 6.5WE (6.5Y-2.5Nd-0.8Zr) have better biocompatibility as compared with that with 2.5WE (2.5Y-1.0Nd-0.8Zr) and 7.5WE (7.5Y-4.2Nd-0.8Zr), and could be as the promising candidate materials for medical stent applications.

  15. A study of weldability and fracture modes in electron beam weldments of AZ series magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chi, C.-T. [Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu 300, Taiwan (China) and System Manufacturing Center, Chung-Shan Institute of Science and Technology, PO Box 90008-14, Sanxia 237, Taipei, Taiwan (China)]. E-mail: joseph.mse92g@nctu.edu.tw; Chao, C.-G. [Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu 300, Taiwan (China)]. E-mail: c_g_chao@hotmail.com; Liu, T.-F. [Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu 300, Taiwan (China)]. E-mail: coe@cc.nctu.edu.tw; Wang, C.-C. [Graduate School of Industrial Design and Architecture, Shih-Chien University, Taipei 104, Taiwan (China)]. E-mail: zcwang@mail.usc.edu.tw

    2006-11-05

    Given the growing need for environmental protection and lightweight construction, electron beam welding (EBW) is becoming the most important welding technology because it can compensate for the poor formability of magnesium alloys. This paper examines interactions between the properties of three AZ series magnesium alloys and welding conditions. The EBW process can yield four kinds of defect in a weld: cavities, the heat-affected zone (HAZ), undercuts, and root concavities. These defects obviously induce stress concentrations in the weld, and may seriously damage its strength. Additionally, the distribution of precipitates ({gamma} phase, Mg{sub 17}Al{sub 12}) in the fusion zone (FZ) changes from a relatively small number of scattered particles to a dense population of dendrites as the Al content of the magnesium alloy increases. Under excessive tensile stress, alloy weldments break in one of two fracture modes: an irregular FZ fracture, or a regular HAZ fracture. AZ31B usually exhibits the former mode and AZ91D the latter, while AZ61A exhibits each mode half the time. The overall weldability, which depends on the random distribution of these precipitates and defects, is found to be greatest for the AZ61A alloy. The best process window, on the other hand, is found for the AZ91D alloy. Finally, we obtain optimum parameters for the EBW process and empirical formulae for the weldment strength as a function of these parameters. These results are closely related to each other.

  16. Mechanical properties of homogenized twin-roll cast and conventionally cast AZ31 magnesium alloys

    Directory of Open Access Journals (Sweden)

    Mariia Zimina

    2015-02-01

    Full Text Available The improvement of mechanical properties of magnesium alloys nowadays is very important, because of the variety of industrial applications. For this goal, the number of casting techniques and further treatments were developed. Among the continuous casting techniques, which allow producing long strips of the alloys, is twin-roll casting. Using this process one can get the magnesium alloy with finest microstructure and higher specific strength. In this paper the comparison of tensile properties of conventionally cast and twin-roll cast AZ31 magnesium alloys was made. Tensile tests were carried out with constant strain rate 10-3 s-1 at temperatures ranging from 100 to 300 °C. Both materials were tested in as-cast state and after homogenization treatment at 450 °C for 10 hours. The investigation showed that there are no significant changes in ductility of AZ31 conventionally cast alloy even after heat treatment, while the ductility of twin-roll cast alloy increases.

  17. Influence of Cobalt on the Properties of Load-Sensitive Magnesium Alloys

    Directory of Open Access Journals (Sweden)

    Kai Kerber

    2012-12-01

    Full Text Available In this study, magnesium is alloyed with varying amounts of the ferromagnetic alloying element cobalt in order to obtain lightweight load-sensitive materials with sensory properties which allow an online-monitoring of mechanical forces applied to components made from Mg-Co alloys. An optimized casting process with the use of extruded Mg-Co powder rods is utilized which enables the production of magnetic magnesium alloys with a reproducible Co concentration. The efficiency of the casting process is confirmed by SEM analyses. Microstructures and Co-rich precipitations of various Mg-Co alloys are investigated by means of EDS and XRD analyses. The Mg-Co alloys’ mechanical strengths are determined by tensile tests. Magnetic properties of the Mg-Co sensor alloys depending on the cobalt content and the acting mechanical load are measured utilizing the harmonic analysis of eddy-current signals. Within the scope of this work, the influence of the element cobalt on magnesium is investigated in detail and an optimal cobalt concentration is defined based on the performed examinations.

  18. Degradation and antibacterial properties of magnesium alloys in artificial urine for potential resorbable ureteral stent applications.

    Science.gov (United States)

    Lock, Jaclyn Y; Wyatt, Eric; Upadhyayula, Srigokul; Whall, Andrew; Nuñez, Vicente; Vullev, Valentine I; Liu, Huinan

    2014-03-01

    This article presents an investigation on the effectiveness of magnesium and its alloys as a novel class of antibacterial and biodegradable materials for ureteral stent applications. Magnesium is a lightweight and biodegradable metallic material with beneficial properties for use in medical devices. Ureteral stent is one such example of a medical device that is widely used to treat ureteral canal blockages clinically. The bacterial colony formation coupled with the encrustation on the stent surface from extended use often leads to clinical complications and contributes to the failure of indwelling medical devices. We demonstrated that magnesium alloys decreased Escherichia coli viability and reduced the colony forming units over a 3-day incubation period in an artificial urine (AU) solution when compared with currently used commercial polyurethane stent. Moreover, the magnesium degradation resulted in alkaline pH and increased magnesium ion concentration in the AU solution. The antibacterial and degradation properties support the potential use of magnesium-based materials for next-generation ureteral stents. Further studies are needed for clinical translation of biodegradable metallic ureteral stents.

  19. Tempering effect on corrosion performance of magnesium alloys for biomedical applications

    NARCIS (Netherlands)

    Zhang, X.; Ferrari, G.M.; Erinc, M.; Sillekens, W.H.

    2010-01-01

    The corrosion resistances for magnesium alloys AZ80, AE82 and ZM21 treated at 200 and 330°C for 2 hours, and for AZ80 and AE82 at 415°C for 8 hours were investigated using potentiodynamic polarization measurements in simulated body fluid (SBF) solution at 37°C. The morphology and the Volta potential

  20. Preparation and Corrosion Resistance of Rare Earth Conversion Coatings on AZ91 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Xu Yue; Chen Xiang; Lü Zushun; Li Yingjie

    2005-01-01

    The feasibility of forming pollution-free and environmentally benign Ce-based rare earth conversion coatings (short for RECCs) on AZ91 magnesium alloy to enhance corrosion resistance was studied. The effect of optimum processing parameters on corrosion resistance of RECCs, such as density of treating solution, temperature and time of coating formation were discussed. Protective performance of conversion coatings on magnesium alloy was evaluated by moisture/heating test, anodic polarization, etc. The results show that Ce-based RECCs under moisture/heating condition can remain intact, with high coverage and no obvious corrosion phenomenon. Corrosion potential increases and passive phenomenon occurs while current density decreases, therefore Ce-based RECCs can improve corrosion resistance of AZ91 magnesium alloy. The morphology of Ce-based RECCs prepared under optimum process through SEM observation is found to be a few particles coherent to the base coating, and the coating has no cracks and exhibits apparent corrosion resistance during corrosion courses of AZ91 magnesium alloy.

  1. Preparation of Si-containing oxide coating and biomimetic apatite induction on magnesium alloy

    Science.gov (United States)

    Yu, Huijun; Dong, Qing; Dou, Jinhe; Pan, Yaokun; Chen, Chuanzhong

    2016-12-01

    Magnesium and its alloys are recently found important in the field of bone repairing for their ideal mechanical performance and excellent biocompatibility. Micro-arc oxidation (MAO) is a simple, controllable and efficient electrochemistry method that can prepare protective ceramic coatings on magnesium alloys. The properties of the MAO coating, such as thickness, microstructure, roughness and composition, can easily be controlled by adjusting the voltage, current density, duration or the electrolyte concentration. In this work, MAO coatings are prepared on ZK61 magnesium alloy at different voltages. The structure characteristics and element distributions of the coating are investigated by XRD, TEM, SEM and EPMA. The MAO samples are immersed in SBF for 7, 14 and 28 days respectively. The corrosion behaviors of the samples in SBF were also investigated by potentiodynamic polarization curves. The corrosion products were characterized by EDS and FT-IR. The MAO coated ZK61 alloy samples showed excellent corrosion resistance and bioactivity. The MAO method demonstrates a great potential in the preparation of degradable and bioactive orthopedic magnesium-based implants.

  2. Mechanical and corrosion properties of Al/Ti film on magnesium alloy AZ31B

    Science.gov (United States)

    Zeng, Rong-Chang; Jiang, Ke; Li, Shuo-Qi; Zhang, Fen; Cui, Hong-Zhi; Han, En-Hou

    2015-03-01

    Preparation of titanium film on magnesium substrate faces a challenge due to non-Fickian inter-diffusion between titanium and magnesium. Aluminum can build a bridge between titanium and magnesium. Al/Ti duplex coatings were deposited on magnesium alloy AZ31B using magnetron sputtering (MS). The low temperature diffusion bonding behavior of the Mg/Al/Ti coating was investigated through SEM and its affiliated EDS. The phase structure and critical load of the coatings were examined by means of XRD and scratch tests, respectively. The results demonstrated that the bonding strength was significantly improved after a post heat treatment (HT) at a temperature of 210°C. The diffusion mechanism of the interfaces of Mg/Al and Al/Ti in the coating was discussed based on the analysis of formation energy of vacancies and diffusion rates. The Al/Ti dual layer enhanced the corrosion resistance of the alloy. And the HT process further increased the corrosion resistance of the coated alloy. This result implies that a post HTat a lower temperature after MS is an effective approach to enhance the bonding strength and corrosion resistance of the Al/Ti film on Mg alloys.

  3. Compression Deformation Behavior of AZ81 Magnesium Alloy at Elevated Temperatures

    Directory of Open Access Journals (Sweden)

    Xiaoping Luo

    2014-01-01

    Full Text Available The hot deformation behavior of an AZ81 magnesium alloy was investigated by hot compressive testing on a Gleeble-1500 thermal mechanical simulator in the temperature range from 200 to 400°C and in the strain rate range of 0.001–5 s−1. The relationships among flow stress, strain rate, and deformation temperature were analyzed, and the deformation activation energy and stress exponent were calculated. The microstructure evolution of the AZ81 magnesium alloy under high deformation was examined. The results indicated that the maximum value of the flow stress increased with the decrease of deformation temperature and the increase of strain rate. When the deformation temperature is constant, the flow stress of the AZ81 magnesium alloy increases with the increase of strain rate, which can be demonstrated by a Zener-Hollomon parameter in a hyperbolic-sine-type equation with a hot compression deformation activation energy of 176.01 KJ/mol and basic hot deformation material factors A, n, and a in the analytical expression of the AZ81 magnesium alloy flow stress of 3.21227×1014 s−1, 7.85, and 0.00866 MPa, respectively.

  4. INFLUENCE OF HEAT TREATMENT ON DAMPING BEHAVIOUR OF THE MAGNESIUM WROUGHT ALLOY AZ61

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.

  5. Electroplating zinc transition layer for electroless nickel plating on AM60 magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao-min; ZHOU Wan-qiu; HAN En-Hou

    2006-01-01

    Electroplating zinc coating as transition layer of electroless nickel plating on AM60 magnesium alloys was investigated. The zinc film can be deposited in a pyrophosphate bath at 50-60 ℃ under current density of 0.5-1.5 A/dm2. A new fore treatment technology was applied by acid cleaning with a solution containing molybdate and phosphorous acid, by alkaline cleaning in a bath containing molybdate and sodium hydroxide. The subsequent electroless plating was carried out in nickel sulfate bath. The SEM observation shows that the deposition is uniform and compact. The polarization curve measurements show that the corrosion potential of the zinc plating in 3.5% NaCl is about -1.3 V(vs SCE) which is noble than that of magnesium substrate. The zinc electroplating can be applied as the pretreatment process for electroless nickel plating on magnesium alloys.

  6. A two-step superplastic forging forming of semi-continuously cast AZ70 magnesium alloy

    Directory of Open Access Journals (Sweden)

    Pan Wang

    2015-03-01

    Full Text Available A two-step technology combined forging with superplastic forming has been developed to enhance the forgeability of semi-continuously cast AZ70 magnesium alloy and realize the application of the as-cast magnesium alloy in large deformation bullet shell. In the first step, fine-grained microstructure preforms that are suitable for superplastic forming were obtained by reasonably designing the size of the initial blanks with the specific height-to-diameter ratio, upsetting the blanks and subsequent annealing. In the second step, the heat treated preforms were forged into the end products at the superplastic conditions. The end products exhibit high quality surface and satisfied microstructure. Consequently, this forming technology that not only avoids complicating the material preparation but also utilizes higher strain rate superplastic provides a near net-shaped novel method on magnesium forging forming technology using as-cast billet.

  7. New Technique of Casting-rolling Strips for Semi-solid Magnesium Alloys

    Institute of Scientific and Technical Information of China (English)

    Shuisheng XIE; Maopeng GENG; Xinmin ZHOU; Ying ZHANG; Songyang ZHANG; Yanchun WANG; Guojie HUANG

    2005-01-01

    The conjugation of semi-solid process technique and casting-rolling technique applied to produce the magnesium strips was studied. The semi-solid slurry hasbeen prepared continuously by the mechanical method and its temperature was controlled strictly at the same time. AZ91D and AZ31 casting magnesium alloys were applied to the experiment.The casting-rolling strips with non-dendritic structure were obtained and its main mechanical property is better. The process ability of the casting-rolling strips was studied. It is significative to link the semi-solid process techniques and casting-rolling techniques, through which we can get high quality magnesium alloy strips with non- dendritic structure and improve the overall properties of the products.

  8. Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D

    Institute of Scientific and Technical Information of China (English)

    LIU Yan'gai(刘艳改); LIU Wenhui(刘文辉); XIONG Shoumei(熊守美); LIU Baicheng(柳百成); Wang Gang (王罡); MATSUMOTO Yoshihide; MURAKAMI Masayuki

    2004-01-01

    The mechanical properties of magnesium die-casting components can be improved with improved die-casting processing technology. An orthogonal experiment with four factors and three levels (Lq, 34) was used to evaluate the effect of various die-casting processing parameters on the quality and mechanical properties of an AZ91D magnesium alloy cylinder head cover component. The results show that the injection speed and casting and die temperatures all influence the component quality, with the influence of the casting pressure being the smallest. The injection speed and casting pressure are the two most important factors influencing the tensile strength. The best die-casting parameters for the magnesium alloy cylinder head cover component were determined to be a casting temperature of 660℃, a die temperature of 200℃, an injection speed of 70 ms(1, and a casting pressure of 65 MPa. The porosity is one of the most important parameters influencing the casting strength.

  9. Magnesium

    Science.gov (United States)

    ... by limiting the amount lost in urine. Low magnesium intakes for a long period of time, however, can ... is important for healthy bones. People with higher intakes of magnesium have a higher bone mineral density, which is ...

  10. Radiation resistance and parameters of activation of aluminium-magnesium-scandium and aluminium-magnesium-vanadium alloys under neutron irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, L.I.; Ivanov, V.V.; Lazorenko, V.M.; Platov, Yu.M.; Tovtin, V.I.; Toropova, L.S. (A.A. Baikov Inst. of Metallurgy, Academy of Sciences, Moscow (Russia))

    1992-09-01

    Alloys Al-2.24Mg-0.223Sc-0.04Zr, Al-2.24Mg-0.12Sc-0.04Zr, and Al-2.24Mg-0.05V (at.%) annealed at 150deg C and 400deg C were irradiated at [approx equal] 70 and [approx equal] 150deg C in the SM-2 reactor. The maximum neutron fluence was 4.7x10[sup 24] m[sup -2] (E > 0.1 MeV). The tensile tests were carried out in the temperature range 20 to 350deg C. Alloy Al-2.24 Mg-0.23Sc-0.04Zr annealed at 400deg C and alloy Al-2.24Mg-0.12Sc-0.04Zr annealed at 150deg C at all test temperatures retained good mechanical properties after irradiation. The mechanisms for the radiation resistance of aluminium-scandium and aluminium-magnesium-scandium alloys are discussed. Calculations of induced radioactivity and its decay behaviour after shutdown in aluminium and Al-2.24Mg-(0.12-0.23)Sc alloys were carried out. Composition of the radionuclides in these materials after irradiation in the SM-2 reactor were also determined using a gamma-spectroscopy technique. (orig.).

  11. A brief review of calcium phosphate conversion coating on magnesium and its alloys

    Science.gov (United States)

    Zaludin, Mohd Amin Farhan; Jamal, Zul Azhar Zahid; Jamaludin, Shamsul Baharin; Derman, Mohd Nazree

    2016-07-01

    Recent developments have shown that magnesium is a promising candidate to be used as a biomaterial. Owing to its light weight, biocompatibility and compressive strength comparable with natural bones makes magnesium as an excellent choice for biomaterial. However, high reactivity and low corrosion resistance properties have restricted the application of magnesium as biomaterials. At the moment, several strategies have been developed to solve this problem. Surface modification of magnesium is one of the popular solutions to solve the problem. Among many techniques developed in the surface modification, conversion coating method is one of the simple and effective techniques. From various types of conversion coating, calcium phosphate-based conversion coating is the most suitable for biomedical fields. This paper reviews some studies on calcium phosphate coating on Mg and its alloys via chemical conversion method and discusses some factors determining the coating performance.

  12. Microstructure evolution and fracture behavior in superplastic deformation of hot-rolled AZ31 Mg alloy sheet

    Energy Technology Data Exchange (ETDEWEB)

    Yin, D.L.; Zhang, K.F.; Wang, G.F. [School of Material Science and Technology, Harbin Inst. of Tech. (China)

    2005-07-01

    Fine-grained AZ31 magnesium alloy sheets were prepared through hot rolling process. The superplastic properties of hot-rolled AZ31 Mg alloy was examined by uniaxial tensile tests at a temperature range 250{proportional_to}450 C and strain rate range 0.7 x 10{sup -3}{proportional_to}1.4 x 10{sup -1} s{sup -1}. Optical and scanning electronic microscope (SEM) were used to observe the microstructure evolution and fracture behavior in superplastic deformation of AZ31 Mg alloy and the values of deformation activation energy at various temperatures were calculated. It is demonstrated that, the hot-rolled AZ31 alloy begins to exhibit superplasticity from 300 C and a maximum elongation of 362.5% is obtained at 400 C and 0.7 x 10{sup -3} s{sup -1}. In the temperature range 300{proportional_to}400 C, the dominant superplastic deformation mechanism is grain boundary sliding (GBS) controlled by grain boundary diffusion and the influence of temperature on the fracture behavior of AZ31 Mg alloy is characterized by the change from dimple-aggregating type to intercrystalline one. (orig.)

  13. SHOT PEENING INFLUENCE ON CORROSION RESISTANCE OF AE21 MAGNESIUM ALLOY

    Directory of Open Access Journals (Sweden)

    Branislav Hadzima

    2010-12-01

    Full Text Available Evaluation of the electrochemical characteristics of the AE21 magnesium alloy is presented in the article. The surfaces of tested alloys were treated by grinding and grinding followed by sodium bicarbonate shot-peening. The specimens were evaluated by electrochemical impedance spectroscopy method in combination with exposure tests in 0.1 NaCl solution. The exposition times were from 5 minutes to 168 hours. The measured data were analysed using equivalent circuits and polarization resistances of the various corrosion systems were determined. Results of the electrochemical measurements are complemented by metallographical evaluation of the tested alloy.

  14. THE ROLE OF MAGNESIUM IN Al-Li-Cu-Mg-Zr ALLOYS

    OpenAIRE

    S Harris; Noble, B.; Dinsdale, K.

    1987-01-01

    Within the UK, research has concentrated on alloys of composition Al-2.5%Li-1.2%Cu-0.7%Mg-0.12%Zr (8090) which is a medium strength replacement for 2014. Ageing this lithium-containing alloy at an elevated temperature produces a mixture of phases which are, in order of importance, δ'(Al3Li), S(Al2CuMg) and T1(Al2CuLi). Changing the magnesium content of the alloy changes the relative proportions of the latter two phases, and also influences the volume fraction of δ' that is produced. A systema...

  15. Biomimetic hydrophobic surface fabricated by chemical etching method from hierarchically structured magnesium alloy substrate

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yan; Yin, Xiaoming; Zhang, Jijia [Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022 (China); Wang, Yaming [Institute for Advanced Ceramics, Harbin Institute of Technology, Harbin 150001 (China); Han, Zhiwu, E-mail: zwhan@jlu.edu.cn [Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022 (China); Ren, Luquan [Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022 (China)

    2013-09-01

    As one of the lightest metal materials, magnesium alloy plays an important role in industry such as automobile, airplane and electronic product. However, magnesium alloy is hindered due to its high chemical activity and easily corroded. Here, inspired by typical plant surfaces such as lotus leaves and petals of red rose with super-hydrophobic character, the new hydrophobic surface is fabricated on magnesium alloy to improve anti-corrosion by two-step methodology. The procedure is that the samples are processed by laser first and then immersed and etched in the aqueous AgNO{sub 3} solution concentrations of 0.1 mol/L, 0.3 mol/L and 0.5 mol/L for different times of 15 s, 40 s and 60 s, respectively, finally modified by DTS (CH{sub 3}(CH{sub 2}){sub 11}Si(OCH{sub 3}){sub 3}). The microstructure, chemical composition, wettability and anti-corrosion are characterized by means of SEM, XPS, water contact angle measurement and electrochemical method. The hydrophobic surfaces with microscale crater-like and nanoscale flower-like binary structure are obtained. The low-energy material is contained in surface after DTS treatment. The contact angles could reach up to 138.4 ± 2°, which hydrophobic property is both related to the micro–nano binary structure and chemical composition. The results of electrochemical measurements show that anti-corrosion property of magnesium alloy is improved. Furthermore, our research is expected to create some ideas from natural enlightenment to improve anti-corrosion property of magnesium alloy while this method can be easily extended to other metal materials.

  16. Research activities of biomedical magnesium alloys in China

    Science.gov (United States)

    Zheng, Yufeng; Gu, Xuenan

    2011-04-01

    The potential application of Mg alloys as bioabsorable/biodegradable implants have attracted much recent attention in China. Advances in the design and biocompatibility evaluation of bio-Mg alloys in China are reviewed in this paper. Bio-Mg alloys have been developed by alloying with the trace elements existing in human body, such as Mg-Ca, Mg-Zn and Mg-Si based systems. Additionally, novel structured Mg alloys such as porous, composited, nanocrystalline and bulk metallic glass alloys were tried. To control the biocorrosion rate of bio-Mg implant to match the self-healing/regeneration rate of the surrounding tissue in vivo, surface modification layers were coated with physical and chemical methods.

  17. Influence of Section Thickness on Microstructure and Mechanical Properties of Squeeze Cast Magnesium Alloy AM60

    Science.gov (United States)

    Zhang, Xuezhi; Wang, Meng; Sun, Zhizhong; Hu, Henry

    Squeeze cast light alloys has been approved for advanced engineering design of light integrity automotive applications. An understanding of the effect of section thicknesses on mechanical properties of squeeze cast magnesium alloys is essential for proper design of different applications. The present work studied the microstructure and tensile properties of magnesium alloy AM60 with different section thickness of 6, 10 and 20mm squeeze cast under an applied pressure of 30MPa. The results of tensile testing indicate that the yield strength (YS), ultimate tensile strength (UTS) and elongation (Ef) increase with a decreasing in section thicknesses of squeeze cast AM60. The microstructure analysis shows that the improvement in the tensile properties of squeeze cast AM60 is mainly attributed to the low level of gas porosity and the high content of eutectic phases and fine grain structure which resulted from high solidification rates taking place in the thin section.

  18. Fracture performance of high strength steels, aluminium and magnesium alloys during plastic deformation

    Directory of Open Access Journals (Sweden)

    Yu Haiyan

    2015-01-01

    Full Text Available A series of uniaxial tension tests were performed for 5052 and 6061 aluminum alloys, AZ31B magnesium alloy, TRIP600 and DP600 steels, to obtain a better understanding of their fracture performance. Scanning electron microscope (SEM observation of the microstructure evolution was conducted. The dimple structure, orientation relationship between the fracture surface and tensile direction, necking behavior were analyzed. The fracture mechanism and fracture mode of each material was discussed in detail. The results show that TRIP600 steel is subject to a typical inter-granular ductile fracture combined by shear fracture. DP600 steel belongs to mainly ductility mixed with normal fracture. Both 5052 and 6061 aluminum alloys are subject to a mixed ductility fracture and brittle fracture. AA5052 and AA6061 belong to a typical shear fracture and a normal fracture, respectively. Magnesium AZ31B is typical of a brittle fracture combined with normal fracture.

  19. Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Gunchoo [KISTI ReSEAT Program, Daejon (Korea, Republic of)

    2017-05-15

    Magnesium alloys, which possess excellent specific strength and castability, are highly susceptible to corrosion. Although anodizing is widely used to resolve this problem, it requires toxic electrolytes and produces relatively thin and weak surface coatings. Recently, plasma electrolytic oxidation (PEO) has emerged as an alternative to anodizing. Although it is derived from conventional anodizing, it uses eco-friendly electrolytes and forms thicker, denser, and harder coatings on the surface of magnesium alloys. However, PEO is a complex process involving physical, chemical, and electrochemical reactions, and it is influenced by various factors such as the alloy substrate composition, electrolyte/additive composition, and the electrical variables including the mode of power supply, applied voltage/current density, frequency, and duty cycle. In this article, the detailed effects of these parameters on the microstructure and properties of the PEO coatings are reviewed, and methods of improving the coatings are proposed.

  20. Bioresorbable drug-eluting magnesium-alloy scaffold for treatment of coronary artery disease.

    Science.gov (United States)

    Campos, Carlos M; Muramatsu, Takashi; Iqbal, Javaid; Zhang, Ya-Jun; Onuma, Yoshinobu; Garcia-Garcia, Hector M; Haude, Michael; Lemos, Pedro A; Warnack, Boris; Serruys, Patrick W

    2013-12-16

    The introduction of metallic drug-eluting stents has reduced the risk of restenosis and widened the indications of percutaneous coronary intervention in treatment of coronary artery disease. However, this medical device can induce hypersensitive reaction that interferes with the endothelialization and healing process resulting in late persistent or acquired malapposition of the permanent metallic implant. Delayed endotheliaization and malapposition may lead to late and very late stent thrombosis. Bioresorbable scaffolds (BRS) have been introduced to potentially overcome these limitations, as they provide temporary scaffolding and then disappear, liberating the treated vessel from its cage. Magnesium is an essential mineral needed for a variety of physiological functions in the human body and its bioresorbable alloy has the strength-to-weight ratio comparable with that of strong aluminum alloys and alloy steels. The aim of this review is to present the new developments in Magnesium BRS technology, to describe its clinical application and to discuss the future prospects of this innovative therapy.

  1. Study on solid solution and aging process of AZ91D magnesium alloy with cerium

    Institute of Scientific and Technical Information of China (English)

    GUO

    2010-01-01

    The influence of Ce on solid solution and aging process of AZ91D magnesium alloy was analyzed.The results showed that the decomposition of β-Mg17Al12 phase in AZ91D magnesium alloy at 420 ℃ could be completed within 12 h,while this process in the Ce-containing alloy required more time.In subsequent aging process at 175 ℃,Ce obviously delayed the aging process of AZglD.It was inferred that the influence of Ce on process of solid solution and aging was relative to the Ce that existed in β-Mg17Al12 phase of original structure in the form of solid solution,and the interaction of the Ce and Al was an important factor to get process of solution and aging slowly.

  2. Opportunities and challenges for the biodegradable magnesium alloys as next-generation biomaterials.

    Science.gov (United States)

    Ding, Wenjiang

    2016-06-01

    In recent years, biodegradable magnesium alloys emerge as a new class of biomaterials for tissue engineering and medical devices. Deploying biodegradable magnesium-based materials not only avoids a second surgical intervention for implant removal but also circumvents the long-term foreign body effect of permanent implants. However, these materials are often subjected to an uncontrolled and fast degradation, acute toxic responses and rapid structural failure presumably due to a localized, too rapid corrosion process. The patented Mg-Nd-Zn-based alloys (JiaoDa BioMg [JDBM]) have been developed in Shanghai Jiao Tong University in recent years. The alloy series exhibit lower biodegradation rate and homogeneous nanophasic degradation patterns as compared with other biodegradable Mg alloys. The in vitro cytotoxicity tests using various types of cells indicate excellent biocompatibility of JDBM. Finally, bone implants using JDBM-1 alloy and cardiovascular stents using JDBM-2 alloy have been successfully fabricated and in vivo long-term assessment via implantation in animal model have been performed. The results confirmed the reduced degradation rate in vivo, excellent tissue compatibility and long-term structural and mechanical durability. Thus, this novel Mg-alloy series with highly uniform nanophasic biodegradation represent a major breakthrough in the field and a promising candidate for manufacturing the next generation biodegradable implants.

  3. Influence of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    WANG Ling; TIAN Su-gui; MENG Fan-lai; DU Hong-qiang

    2006-01-01

    Extrusion treatment is a common method to refine the grain size and improve the mechanical properties of metal material. The influence of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy was investigated. The results show that the mechanical properties of AZ31 alloy are obviously improved by extrusion treatment. The ultimate tensile strength (UTS) of AZ31 alloy at room temperature is measured to be 222 MPa, and is enhanced to 265.8 MPa after extrusion at 420℃. The yield tensile strength (YTS) of AZ31 alloy at room temperature is measured to be 84 MPa, and is enhanced to 201 MPa after extrusion at 420℃. The effective improvements on mechanical properties result from the formation of the finer grains during extrusion and the finer particles precipitated by age treatment. The features of the microstructure evolution during hot extruded of AZ31 alloy are dislocation slipping on the matrix and occurrence of the dynamic recrystallization.

  4. Magnesium–Gold Alloy Formation by Underpotential Deposition of Magnesium onto Gold from Nitrate Melts

    Directory of Open Access Journals (Sweden)

    Vesna S. Cvetković

    2017-03-01

    Full Text Available Magnesium underpotential deposition on gold electrodes from magnesium nitrate –ammonium nitrate melts has been investigated. Linear sweep voltammetry and potential step were used as electrochemical techniques. Scanning electron microscopy (SEM, energy dispersive spectrometry (EDS and X-ray diffraction (XRD were used for characterization of obtained electrode surfaces. It was observed that reduction processes of nitrate, nitrite and traces of water (when present, in the Mg underpotential range studied, proceeded simultaneously with magnesium underpotential deposition. There was no clear evidence of Mg/Au alloy formation induced by Mg UPD from the melt made from eutectic mixture [Mg(NO32·6H2O + NH4NO3·XH2O]. However, EDS and XRD analysis showed magnesium present in the gold substrate and four different Mg/Au alloys being formed as a result of magnesium underpotential deposition and interdiffusion between Mg deposit and Au substrate from the melt made of a nonaqueous [Mg(NO32 + NH4NO3] eutectic mixture at 460 K.

  5. The Effect of Adding Corrosion Inhibitors into an Electroless Nickel Plating Bath for Magnesium Alloys

    Science.gov (United States)

    Hu, Rong; Su, Yongyao; Liu, Hongdong; Cheng, Jiang; Yang, Xin; Shao, Zhongcai

    2016-10-01

    In this work, corrosion inhibitors were added into an electroless nickel plating bath to realize nickel-phosphorus (Ni-P) coating deposition on magnesium alloy directly. The performance of five corrosion inhibitors was evaluated by inhibition efficiency. The results showed that only ammonium hydrogen fluoride (NH4HF2) and ammonium molybdate ((NH4)2MoO4) could be used as corrosion inhibitors for magnesium alloy in the bath. Moreover, compounding NH4HF2 and (NH4)2MoO4, the optimal concentrations were both at 1.5 ~ 2%. The deposition process of Ni-P coating was observed by using a scanning electron microscope (SEM). It showed corrosion inhibitors inhibited undesired dissolution of magnesium substrate during the electroless plating process. In addition, SEM observation indicated that the corrosion inhibition reaction and the Ni2+ replacement reaction were competitive at the initial deposition time. Both electrochemical analysis and thermal shock test revealed that the Ni-P coating exhibited excellent corrosion resistance and adhesion properties in protecting the magnesium alloy.

  6. Novel magnesium alloy Mg–2La caused no cytotoxic effects on cells in physiological conditions

    Energy Technology Data Exchange (ETDEWEB)

    Weizbauer, Andreas, E-mail: weizbauer.andreas@mh-hannover.de [Laboratory for Biomechanics and Biomaterials, Department of Orthopedic Surgery, Hannover Medical School, Anna-von-Borries-Straße 1-7, 30625 Hannover (Germany); CrossBIT, Center for Biocompatibility and Implant-Immunology, Department of Orthopedic Surgery, Hannover Medical School, Feodor-Lynen-Str. 31, 30625 Hannover (Germany); Seitz, Jan-Marten [Institute of Materials Science, Leibniz Universität Hannover, An der Universität 2, 30823 Garbsen (Germany); Werle, Peter [ABB AG, Trafoweg 4, 06112 Halle (Germany); Hegermann, Jan [Institute of Functional and Applied Anatomy, Hannover Medical School, Carl-Neuberg-Straße 1, 30625 Hannover (Germany); Willbold, Elmar [Laboratory for Biomechanics and Biomaterials, Department of Orthopedic Surgery, Hannover Medical School, Anna-von-Borries-Straße 1-7, 30625 Hannover (Germany); CrossBIT, Center for Biocompatibility and Implant-Immunology, Department of Orthopedic Surgery, Hannover Medical School, Feodor-Lynen-Str. 31, 30625 Hannover (Germany); Eifler, Rainer [Institute of Materials Science, Leibniz Universität Hannover, An der Universität 2, 30823 Garbsen (Germany); Windhagen, Henning [Laboratory for Biomechanics and Biomaterials, Department of Orthopedic Surgery, Hannover Medical School, Anna-von-Borries-Straße 1-7, 30625 Hannover (Germany); Reifenrath, Janin [Small Animal Clinic, University of Veterinary Medicine Hannover, Bünteweg 9, 30559 Hannover (Germany); Waizy, Hazibullah [Laboratory for Biomechanics and Biomaterials, Department of Orthopedic Surgery, Hannover Medical School, Anna-von-Borries-Straße 1-7, 30625 Hannover (Germany)

    2014-08-01

    Using several different in vitro assays, a new biodegradable magnesium alloy Mg–2La, composed of 98% magnesium and 2% lanthanum, was investigated as a possible implant material for biomedical applications. An in vitro cytotoxicity test, according to EN ISO 10993-5/12, with L929 and human osteoblastic cells identified no toxic effects on cell viability at physiological concentrations (at 50% dilutions and higher). The metabolic activity of human osteoblasts in the 100% extract was decreased to < 70% and was therefore rated as cytotoxic. The degradation rates of Mg–2La were evaluated in phosphate buffered saline and four different cell culture media. The degradation rates were shown to be influenced by the composition of the solution, and the addition of fetal bovine serum slightly accelerated the corrosive process. The results of these in vitro experiments suggest that Mg–2La is a promising candidate for use as an orthopedic implant material. - Highlights: • A new magnesium alloy (Mg–2La) has been developed. • Magnesium alloy Mg–2La revealed no toxic effect in physiological concentrations. • Degradation rates were influenced by the corrosion media. • The addition of fetal bovine serum increased the corrosive process slightly.

  7. Magnesium alloy-graphite composites with tailored heat conduction properties for hydrogen storage applications

    Energy Technology Data Exchange (ETDEWEB)

    Pohlmann, Carsten; Kalinichenka, Siarhei [Institute for Materials Science, Dresden University of Technology, Helmholtzstr. 7, 01069 Dresden (Germany); Roentzsch, Lars; Hutsch, Thomas [Fraunhofer Institute for Manufacturing Technology and Applied Materials Research, Winterbergstr. 28, 01277 Dresden (Germany); Kieback, Bernd [Institute for Materials Science, Dresden University of Technology, Helmholtzstr. 7, 01069 Dresden (Germany); Fraunhofer Institute for Manufacturing Technology and Applied Materials Research, Winterbergstr. 28, 01277 Dresden (Germany)

    2010-12-15

    Melt-spun magnesium alloys that contain catalytically active constituents have become attractive hydrogen storage materials due to their ultra-fine and homogeneous microstructure and their excellent (de-)hydrogenation characteristics. However, their heat conduction properties have to be improved for practical applications. For this purpose, composites of melt-spun magnesium alloys and expanded natural graphite (ENG) were examined in this work. Melt-spun flakes were mixed with different amounts of up to 25.5 wt.% ENG. These mixtures were compacted to cylindrical pellets using compaction pressures up to 600 MPa. For comparison, pellets of pure magnesium hydride and ENG were equally processed. All sets of specimens were investigated regarding their thermal conductivities in radial and axial direction, their microstructure and phase fractions. It was found that the heat transfer characteristics can be tailored in a wide range, e.g. the thermal conductivity of magnesium alloy-ENG compacts were tuned from 1 up to 47 W m{sup -1} K{sup -1}. For the system MgH{sub 2}-ENG, the thermal conductivity can be adjusted from 1 up to 43 W m{sup -1} K{sup -1}. Therefore, a hydrogen storage material with homogeneous heat transfer properties can be anticipated which only slightly depend on the hydrogenated fraction. (author)

  8. Preparation and Performance of Rare Earths Chemical Conversion Film on Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Golden yellow cerium conversion film was obtained on magnesium alloys surface by immersion method and the preparation parameters were established. The influence of different process parameters on the surface morphology and performance of the conversion film were analyzed by means of SEM and electrochemical method. Formation dynamics about cerium conversion film on magnesium alloy in solution containing cerium salt and the anti-corrosion behavior of the conversion film in 3.5% NaCl solution were studied by electrochemical method respectively. The results shows that the conversion film is more compact at room temperature when concentration of cerium sulfate is 10 g·L-1 in the solution; the open circuit potential of the magnesium sample moves up to positive direction about 100 mV, the surface of conversion film becomes even and lustrous, and the adhesion intensity of conversion film increases when adding aluminum nitrate into the solution containing cerium salt. The pH value of the solution and immersion time of the sample in the solution also affect the surface morphology and anti-corrosion property of the conversion film. After covered by rare earths conversion film, the anti-corrosion property of magnesium alloy is obviously improved. Rare earth conversion film has self-repairing capability in corrosion medium.

  9. Evaluation of magnesium alloys with alternative surface finishing for the proliferation and chondro-differentiation of human mesenchymal stem cells

    Energy Technology Data Exchange (ETDEWEB)

    Trinidad, J; Arruebarrena, G; De Argandona, E Saenz; De Eguino, G Ruiz; Infante, A; RodrIguez, C I, E-mail: jtrinidad@eps.mondragon.edu

    2010-11-01

    Articular cartilage has little capacity for self-repair. As a result, continuous mechanical stress can lead to the degradation of articular cartilage, culminating in progressive damage and joint degeneration. Tissue engineering has arisen as a promising therapeutic approach to cartilage repair. Magnesium alloys are one of the most important metallic biomaterials emerging in this area due to their biocompatibility, bio-absorbability and especially to their mechanical properties. These properties make magnesium alloys a promising biomaterial in the regeneration of cartilage tissue. Objective. This study was undertaken to analyze the influence of surface characteristics of magnesium alloys in the adhesion, proliferation and differentiation of human mesenchymal stem cells (MSCs). Methods. Two commercial magnesium alloys (AZ31B and ZM21) were subjected to different treatments in order to obtain four different surfaces in each alloy. Human MSCs were seeded into the magnesium alloys and analyzed for their proliferation and chondrogenesis differentiation ability. Results. Human MSCs showed a greater proliferation and chondro-differentiation when cultured in the ZM21 magnesium alloy with a surface finishing of fine sanding, polishing, and etching.

  10. Fabrication of a Delaying Biodegradable Magnesium Alloy-Based Esophageal Stent via Coating Elastic Polymer

    Directory of Open Access Journals (Sweden)

    Tianwen Yuan

    2016-05-01

    Full Text Available Esophageal stent implantation can relieve esophageal stenosis and obstructions in benign esophageal strictures, and magnesium alloy stents are a good candidate because of biodegradation and biological safety. However, biodegradable esophageal stents show a poor corrosion resistance and a quick loss of mechanical support in vivo. In this study, we chose the elastic and biodegradable mixed polymer of Poly(ε-caprolactone (PCL and poly(trimethylene carbonate (PTMC as the coated membrane on magnesium alloy stents for fabricating a fully biodegradable esophageal stent, which showed an ability to delay the degradation time and maintain mechanical performance in the long term. After 48 repeated compressions, the mechanical testing demonstrated that the PCL-PTMC-coated magnesium stents possess good flexibility and elasticity, and could provide enough support against lesion compression when used in vivo. According to the in vitro degradation evaluation, the PCL-PTMC membrane coated on magnesium was a good material combination for biodegradable stents. During the in vivo evaluation, the proliferation of the smooth muscle cells showed no signs of cell toxicity. Histological examination revealed the inflammation scores at four weeks in the magnesium-(PCL-PTMC stent group were similar to those in the control group (p > 0.05. The α-smooth muscle actin layer in the media was thinner in the magnesium-(PCL-PTMC stent group than in the control group (p < 0.05. Both the epithelial and smooth muscle cell layers were significantly thinner in the magnesium-(PCL-PTMC stent group than in the control group. The stent insertion was feasible and provided reliable support for at least four weeks, without causing severe injury or collagen deposition. Thus, this stent provides a new stent for the treatment of benign esophageal stricture and a novel research path in the development of temporary stents in other cases of benign stricture.

  11. Effect of heat diffusion on properties of zinc-aluminum coating on AZ91D magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    LI Zhao-feng; HUANG Wei-jiu; LIU Ming

    2006-01-01

    A protecting zinc and aluminum coating on the surface of AZ91D magnesium alloys was obtained by thermal spraying to improve the corrosion and wear resistance performances. In order to enhance the combination between magnesium alloy matrix and zinc and aluminum coating, the sample was heat-treated at 300 ℃ for 2 h, then, the cross-section patterns, XRD pattern, micro-hardness, wear and corrosion resistance abilities were researched. The results indicate that the interface between the coating and substrate is metallurgical bond, and a transitional fusion layer is formed by diffusion. The micro-scale abrasion test and polarization test in 3% NaCl solution show that the diffusion-treated specimen has better wear and corrosion resistance performances in comparison with the undiffusion-treated and substrate magnesium alloys; in addition, it has relatively higher micro-hardness than the undiffusion-treated magnesium alloys.

  12. Effect of laser surface melting on microstructure and corrosion characteristics of AM60B magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Cancan [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100039 (China); Liang, Jun, E-mail: jliang@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zhou, Jiansong, E-mail: jszhou@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Wang, Lingqian [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Li, Qingbiao [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100039 (China)

    2015-07-15

    Highlights: • Laser surface melting was used on AM60B Mg alloy. • The microstructure, composition and corrosion behavior of the as-received and LSM treated specimens were compared. • The laser treated alloy exhibited better corrosion resistance than the as-received one in the long term. • A model of two different corrosion mechanisms was established. - Abstract: Surface modification of laser surface melting (LSM) was applied to the AM60B magnesium alloy using a 10 kW continuous-wave CO{sub 2} laser. The microstructure, composition and corrosion resistance of AM60B magnesium alloy after LSM treatment were investigated by using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and corrosion tests, respectively. Results showed that the LSM treatment produced a continuous and homogeneous modified layer with refined grains, enriched Al element and redistributed intermetallic compounds on AM60B alloy. The corrosion resistance of the AM60B alloy was enhanced by the LSM treatment. The enhancement of the corrosion resistance was mainly attributed to the reduced corrosion susceptibility of Al enriched α-Mg matrix and the barrier effect of uniformly distributed β-phase of the LSM modified layer.

  13. Biodegradable Orthopedic Magnesium-Calcium (MgCa Alloys, Processing, and Corrosion Performance

    Directory of Open Access Journals (Sweden)

    Yuebin Guo

    2012-01-01

    Full Text Available Magnesium-Calcium (Mg-Ca alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized.

  14. Direct-reading spectrochemical analysis of magnesium alloys; Analisis espectroquimico de lectura directa de aleaciones de magnesio

    Energy Technology Data Exchange (ETDEWEB)

    Roca Adell, M.

    1964-07-01

    A Quantometer has been applied to the determination of aluminum, berylium, calcium, iron, silicon and zinc in magnesium alloys Magnox, after the conversion of the samples to the oxide. For the aluminum, whose concentration is relatively high, the conducting briquets technique with an interrupted discharge is employed, using the magnesium as the internal standard. For the other elements a total burning method with direct current arc is employed, using also the magnesium as the internal standard. (Author) 7 refs.

  15. Microstructure and Mechanical Properties of TIG Weld Joint of ZM5 Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    QIN Ren-yao

    2016-06-01

    Full Text Available The ZM5 magnesium alloy plates were welded by TIG welding method. The microstructural characteristics and mechanical properties of ZM5 magnesium alloy joint were studied by optical microscopy, microhardness and tensile testers. The results show that the TIG weld joint of ZM5 magnesium alloy is composed of heat affected zone, partially melted zone and weld metal. The heat affected zone is consisted of primary α-Mg phase and eutectic phase that is composed of eutectic α-Mg and eutectic β-Mg17Al12 phase and mainly precipitated at grain boundaries. In the partially melted zone, the eutectic phase is not only increasingly precipitated at grain boundaries, but also dispersed in grains, and the growth of the β-Mg17Al12 phase is obviously observed. The microstructure in the weld is the typical dendritic morphology. The dendrites are considered as primary α-Mg phase, and the interdendritic regions are α+β eutectic phase. The difference in the microstructure of the heat affected zone, partially melted zone and weld results in their various microhardness values, and leads to the smaller tensile strength and ductility in the ZM5 alloy weld joint than parent metal.

  16. Hot deformation behavior of rare earth magnesium alloy without pre-homogenization treatment

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The behavior and structure evolvement of as-cast Mg-Gd-Y-Nd-Zr magnesium alloy during the hot deformation process were discussed. The flow stress behavior of magnesium alloy over the strain rate range of 0.002-1 s-1 and the temperature range of 573-723 K was researched on Gleeble-1500D hot simulator under the maximum deformation degree of 60%. The experimental results show that the relationship between stress and strain is obviously affected by the strain rate and deformation temperature. The important softening mechanisms are eutectic melting and discontinuous dynamic recrystallization (DDRX) during deformation. The fragments of eutectie melting along the boundaries can turn round so as to take effect of the slippage between grains. The flow stress of Mg-7Gd-5Y-1.2Nd-Zr magnesium alloy during high temperature deformation can be represented by a Zener-Hollomon parameter in the hyperbolic Arrhenius-type equation. The strain coefficient n and deformation activation energy Q are evaluated by linear regression analysis. A, α and n in the analytical expressions of σ are fitted to be 2.401 93× 1015, 0.017 3 MPa-1 and 3.218 19,respectively. The hot deformation activation energy of alloy during hot deformation is 234.950 58 kJ/mol. The results also show that the structure of primitive microstructure has an effect on the plastic deformation.

  17. Bio-Corrosion of Magnesium Alloys for Orthopaedic Applications

    Directory of Open Access Journals (Sweden)

    Emily K. Brooks

    2017-09-01

    Full Text Available Three Mg alloys, Mg–1.34% Ca–3% Zn (MCZ, Mg–1.34% Ca–3% Zn–0.2% Sr (MCZS, and Mg–2% Sr (MS, were examined to understand their bio-corrosion behavior. Electrochemical impedance spectroscopy and polarization scans were performed after 6 days of immersion in cell culture medium, and ion release and changes in media pH were tracked over a 28 day time period. Scanning electron microscopy (SEM of alloy microstructure was performed to help interpret the results of the electrochemical testing. Results indicate that corrosion resistance of the alloys is as follows: MCZ > MCZS > MS.

  18. Analysis on flow stress of magnesium alloys during high temperature deformation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The flow stress of magnesium alloys during hot compression at different temperatures and strain rates was studied by experiments. Materials used were AZ91D alloys in as-cast, homogeneous treatment states, AZ31 and ZK60 alloys in as-cast state.The results show that the thermal simulation curves of different alloys differ from one another at the same deforming condition. The general curves of AZ31 and AZ91D alloys have the character of dynamic recrystallization. There are increase of true stress, drastic falling of true stress and increase of true stress in most curves of ZK60 alloy, while the other curves have the characteristics of dynamic recrystallization. From the analysis the reasonable deforming temperature should be selected from 523 to 673 K for AZ31 and the unhomogenized AZ91D alloy, from 473 to 673 K for the homogenized AZ91D alloy, and it was concluded to be 473 K or 673 K for ZK60 alloy.

  19. Hybrid coating on a magnesium alloy for minimizing the localized degradation for load-bearing biodegradable mini-implant applications

    Energy Technology Data Exchange (ETDEWEB)

    Kannan, M. Bobby, E-mail: bobby.mathan@jcu.edu.au; Liyanaarachchi, S.

    2013-10-01

    The effect of a hybrid coating, calcium phosphate (CaP) + polylactic acid (PLA), on a magnesium alloy on its in vitro degradation (general and localized) behaviour was studied for potential load-bearing biodegradable mini-implant applications. CaP was coated on a magnesium alloy, AZ91, using an electrochemical deposition method. A spin coating method was used to coat PLA on the CaP coated alloy. In vitro degradation performance of the alloy with hybrid coating was evaluated using electrochemical impedance spectroscopy (EIS) in simulated body fluid (SBF). The EIS results showed that the hybrid coating enhanced the degradation resistance of the alloy by more than two-order of magnitude as compared to the bare alloy and one-order of magnitude higher than that of the CaP coated alloy, after 1 h exposure in simulated body fluid (SBF). Long-term (48 h) EIS results also confirmed that the hybrid coating performed better than the bare alloy and the CaP coated alloy. Importantly, the hybrid coating improved the localized degradation resistance of the alloy significantly, which is critical for better in service mechanical integrity. - Highlights: • A hybrid coating (CaP + PLA) was applied on a magnesium-based alloy. • The hybrid coating enhanced the in vitro degradation resistance of the alloy. • Localized degradation resistance was also improved by the hybrid coating.

  20. Gating System Design for a Magnesium Alloy Casting

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The gating system of a cylindrical magnesium casting has been designed by using multiple objective optimization and Taguchi method. Mold filling and solidification processes were simulated by using MAGMASOFT(R).The simulation results indicate that the gating system design has a significant effect on the quality of magnesium castings. In an effort to obtain the optimal design of gating system, the signal-to-noise (S/N) ratio was used to analyze the effect of various gating designs on cavity filling and casting quality by using a weighting method based on the design of an orthogonal array. Four gating system parameters, namely, ingate height,ingate width, runner height, runner width, were optimized with a consideration of multiple objective criteria including filling velocity, shrinkage porosity and product yield.

  1. Effect of intermediate annealing on the microstructure and mechanical property of ZK60 magnesium alloy produced by twin roll casting and hot rolling

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hongmei, E-mail: hmchen@just.edu.cn [Provincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Zang, Qianhao [Provincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Yu, Hui [School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300132 (China); Zhang, Jing [School of Metallurgical and Materials Engineering, Jiangsu University of Science and Technology, Zhang Jiagang 215600 (China); Jin, Yunxue [Provincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003 (China)

    2015-08-15

    Twin roll cast (designated as TRC in short) ZK60 magnesium alloy strip with 3.5 mm thickness was used in this paper. The TRC ZK60 strip was multi-pass rolled at different temperatures, intermediate annealing heat treatment was performed when the thickness of the strip changed from 3.5 mm to 1 mm, and then continued to be rolled until the thickness reached to 0.5 mm. The effect of intermediate annealing during rolling process on microstructure, texture and room temperature mechanical properties of TRC ZK60 strip was studied by using OM, TEM, XRD and electronic universal testing machine. The introduction of intermediate annealing can contribute to recrystallization in the ZK60 sheet which was greatly deformed, and help to reduce the stress concentration generated in the rolling process. Microstructure uniformity and mechanical properties of the ZK60 alloy sheet were also improved; in particular, the room temperature elongation was greatly improved. When the TRC ZK60 strip was rolled at 300 °C and 350 °C, the room temperature elongation of the rolled sheet with 0.5 mm thickness which was intermediate annealed during the rolling process was increased by 95% and 72% than that of no intermediate annealing, respectively. - Highlights: • Intermediate annealing was introduced during hot rolling process of twin roll cast ZK60 alloy. • Intermediate annealing can contribute to recrystallization and reduce the stress concentration in the deformed ZK60 sheet. • Microstructure uniformity and mechanical properties of the ZK60 sheet were improved, in particular, the room temperature elongation. • The elongation of the rolled ZK60 sheet after intermediate annealed was increased by 95% and 72% than that of no intermediate annealing.

  2. Wear and Corrosion Properties of 316L-SiC Composite Coating Deposited by Cold Spray on Magnesium Alloy

    Science.gov (United States)

    Chen, Jie; Ma, Bing; Liu, Guang; Song, Hui; Wu, Jinming; Cui, Lang; Zheng, Ziyun

    2017-08-01

    In order to improve the wear and corrosion resistance of commonly used magnesium alloys, 316L stainless steel coating and 316L-SiC composite coating have been deposited directly on commercial AZ80 magnesium alloy using cold spraying technology (CS). The microstructure, hardness and bonding strength of as-sprayed coatings were studied. Their tribological properties sliding against Si3N4 and GCr15 steel under unlubricated conditions were evaluated by a ball-on-disk tribometer. Corrosion behaviors of coated samples were also evaluated and compared to that of uncoated magnesium alloy substrate in 3.5 wt.% NaCl solution by electrochemical measurements. Scanning electron microscopy was used to characterize the corresponding wear tracks and corroded surfaces to determine wear and corrosion mechanisms. The results showed that the as-sprayed coatings possessed higher microhardness and more excellent wear resistance than magnesium alloy substrate. Meanwhile, 316L and 316L-SiC coating also reduced the corrosion current density of magnesium alloy and the galvanic corrosion of the substrates was not observed after 200-h neutral salt spray exposure, which demonstrated that corrosion resistance of a magnesium alloy substrate could be greatly improved by cold-sprayed stainless steel-based coatings.

  3. Process Influences on Laser-beam Melting of the Magnesium Alloy AZ91

    Science.gov (United States)

    Schmid, Dominik; Renza, Johanna; Zaeh, Michael F.; Glasschroeder, Johannes

    Magnesium's great lightweight potential and high biocompatibility render laser-beam melting of this metal increasingly interesting. Despite recent research activities in this field, the properties thereby achieved are still inadequate for industrial or medical use. Low surface quality caused by powder sintered to parts' boundaries is one of the main problems. This effect is discussed theoretically and examined on single tracks of the magnesium alloy AZ91. Welding-penetration depth and width was measured on a magnesium plate with and without a powder layer. For the derivation of suitable process parameters, structures with incrementally increasing hatch distances were built and microscopically analyzed. The influence on defect percentage and hardness of the parts was determined based on specimens manufactured with different layer thicknesses. The influence of the oxygen content on solids was analyzed by varying the process atmosphere.

  4. Effect of magnesium in aluminum alloys on characteristics of microarc oxidation coatings

    Institute of Scientific and Technical Information of China (English)

    LIU Yao-hui; LI Song; YU Si-rong; ZHU Xian-yong; XU Bai-ming

    2006-01-01

    Microarc oxidation(MAO) coatings were prepared on the surface of aluminum alloys with different contents of magnesium. The morphologies and surface roughness of the coatings were characterized by Confocal laser scanning microscopy(CLSM). Phase and chemical composition of the MAO coatings were analyzed by X-ray diffractometry(XRD) and X-ray photoelectron spectroscopy(XPS). The experimental results show that the coatings formed on different substrates have two-layer morphologies and are mainly composed of Al2O3 and Al-Si-O phases. In addition, the content of Al2O3 increases with increasing the content of magnesium. XPS results prove that magnesium from substrate indeed participates in the MAO process and is incorporated into the coating in the form of MgO. The coating formed on Al-3Mg substrate has the smallest mass loss and the lowest friction coefficient of 0.17-0.19.

  5. Deformation of twins in a magnesium alloy under tension at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X., E-mail: wang1747@purdue.edu [Department of Mechanical Engineering and Technology, Purdue University, West Lafayette, IN 47907 (United States); Department of Metals and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada); Jiang, L. [Department of Metals and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada); Luo, A. [Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210 (United States); Song, J.; Liu, Z.; Yin, F.; Han, Q. [Department of Mechanical Engineering and Technology, Purdue University, West Lafayette, IN 47907 (United States); Yue, S.; Jonas, J.J. [Department of Metals and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada)

    2014-05-01

    Highlights: • Necking and cracking of twins in an Mg alloy is observed. • Slip along the double twin boundaries is observed. • Their effects on hardening/softening are discussed. • The importance of deformation of twins themselves on the deformation of Mg alloys is pointed out the first time. - Abstract: Twinning of a polycrystalline Mg–3Al–0Mn alloy at a uniaxial tensile strain rate of 0.001 s{sup −1} to a total strain of 0.02 was studied by transmission electron microscope. The deformation of twins, necking and cracking, was observed. Meanwhile the interception of twins resulted in double twinning and slip along the double twin boundaries. Their effects are discussed in view of work hardening/softening of magnesium alloys.

  6. Structural stability of ultra-fine grained magnesium alloys processed by equal channel angular pressing

    Science.gov (United States)

    Janeček, M.; Krajňák, T.; Minárik, P.; Čížek, J.; Stráská, J.; Stráský, J.

    2017-05-01

    Structural stability of two magnesium alloys AZ31 (MgAlZn) and AX41 (MgAlCa) processed by equal channel angular pressing is investigated. The mechanical properties, microstructure evolution and dislocation density were studied by microhardness, electron back scatter diffraction and positron annihilation spectroscopy, respectively. The loss of microstructure stability at high temperatures and the coarsening of the ultrafine-grained structure as a result of isochronal annealing is accompanied by the sharp decrease of microhardness and the decrease of dislocation density. The differences in thermal stability of both alloys are related to different conditions of ECAP pressing and the phase stability, namely the presence of stable Al2Ca precipitates in AX41 alloy. Microscopic mechanisms controlling the structure stability of both alloys are discussed.

  7. Influence of Procedure Parameters on Rheological Property of Semi-Solid AZ91D Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Jiang Yunxi; Xie Shuisheng; Li Xinggang; Li Lei

    2004-01-01

    Semi-solid AZ91D magnesium alloy was investigated in isothermal steady-state condition. The influence of stirring technological parameters such as stirring temperature and shear rate to apparent viscosity of semi-solid alloy slurry was discussed. Apparent viscosity increases with stirring temperature decreases at the same shear rate. At the same stirring temperature, apparent viscosity decreases rapidly at first with shear rate increases, and then apparent viscosity decreases slowly with shear rate increases, when shear rate reaches a certain value, apparent viscosity appears tiny increase. According to the experimental data, the relation between solid volume fraction and apparent viscosity of semi-solid AZ9l D alloy at shear rate 238 s- 1 is fitted by regression method, it supplies useful data to the numerical simulation of semi-solid AZ91D alloy die casting process.

  8. Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

    Institute of Scientific and Technical Information of China (English)

    ZHAO Hui; LIU Zheng; CHEN Li-jia; CHEN Ji; HAN Zhong

    2006-01-01

    The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation (MAO) was characterized. The results show that the ceramic coating(3.4-23 μm in thickness)on the surface of AZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carried out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.

  9. Effects of RE on the Microstructure of Mg-8Zn-4Al Magnesium Alloys

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The effects of RE on the microstrcture of as-cast Mg-8Zn-4Al magnesium alloys were investigated. The results show that the solidification range of Mg-8Zn-4Al-xRE alloys increases with RE additions. A binary eutectic reaction can arise and produce a new phase (Mg3Al4Zn2RE) and the temperature of phase transformation point of the new phase is 412.85C. In Mg-8Zn-4Al-1.5RE alloy, a small amount of Mg3Al4Zn2RE phase and ε phases are found besides α(Mg),ψ and τ phases. Also microstructures of Mg-8Zn-4Al alloys can be refined by addition of 1.5 % RE obviously.

  10. Hot compression deformation behavior of the Mg-AI-Y-Zn magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    FANG Xiya; YI Danqing; WANG Bin; WU Chunping; ZHANG Hong

    2008-01-01

    The hot deformation behavior of a Mg-Al-Y-Zn magnesium alloy was investigated by hot compressive testing on a Gleeble-1500 thermal simulator at the temperanging from 523 to 673 K with the swain rate varying from 0.001 to 1s-1.The relationships among flow stress,swain rate,and deformation temperature were analyzed,and the deformation activation energy and stress exponent were calculated.Microstructure evolution of the alloy under different conditions was examined.The results indicated that the maximum value of the flow stress increased with the decrease of deformation temperature or the increase of swain rate.Under the present deformation conditions,dynamic recrystallization (DRX) oeettrred in the alloy,which was the main softening mechanism during deformation at elevated temperature.The deformation temperature and strain had significant effects on the microstructure of the alloy.

  11. Electrodeposition of high corrosion resistance Cu/Ni-P coating on AZ91D magnesium alloy

    Science.gov (United States)

    Zhang, Shan; Cao, Fahe; Chang, Linrong; Zheng, JunJun; Zhang, Zhao; Zhang, Jianqing; Cao, Chunan

    2011-08-01

    High corrosion resistance Cu/Ni-P coatings were electrodeposited on AZ91D magnesium alloy via suitable pretreatments, such as one-step acid pickling-activation, once zinc immersion and environment-friendly electroplated copper as the protective under-layer, which made Ni-P deposit on AZ91D Mg alloy in acid plating baths successfully. The pH value and current density for Ni-P electrodeposition were optimized to obtain high corrosion resistance. With increasing the phosphorous content of the Ni-P coatings, the deposits were found to gradually transform to amorphous structure and the corrosion resistance increased synchronously. The anticorrosion ability of AZ91D Mg alloy was greatly improved by the amorphous Ni-P deposits, which was investigated by potentiodynamic polarization curve and electrochemical impedance spectroscopy (EIS). The corrosion current density ( Icorr) of the coated Mg alloy substrate is about two orders of magnitude less than that of the uncoated.

  12. Transition in Deformation Mechanism of AZ31 Magnesium Alloy during High-Temperature Tensile Deformation

    Directory of Open Access Journals (Sweden)

    Masafumi Noda

    2011-01-01

    Full Text Available Magnesium alloys can be used for reducing the weight of various structural products, because of their high specific strength. They have attracted considerable attention as materials with a reduced environmental load, since they help to save both resources and energy. In order to use Mg alloys for manufacturing vehicles, it is important to investigate the deformation mechanism and transition point for optimizing the material and vehicle design. In this study, we investigated the transition of the deformation mechanism during the high-temperature uniaxial tensile deformation of the AZ31 Mg alloy. At a test temperature of 523 K and an initial strain rate of 3×10−3 s-1, the AZ31 Mg alloy (mean grain size: ~5 μm exhibited stable deformation behavior and the deformation mechanism changed to one dominated by grain boundary sliding.

  13. Development of Laser Surface Technologies for Anti-Corrosion on Magnesium Alloys: a Review

    Science.gov (United States)

    Sun, Rujian; Guan, Yingchun; Zhu, Ying

    2016-03-01

    Magnesium (Mg) alloys have been increasingly used in industries and biomaterial fields due to low density, high specific strength and biodegradability. However, poor surface-related properties are major factors that limit their practical applications. This paper mainly focuses on laser-based anti-corrosion technologies for Mg alloys, beginning with a brief review of conventional methods, and then demonstrates the feasibility of laser surface technologies including laser surface melting (LSM), laser surface alloying (LSA), laser surface cladding (LSC) and laser shock peening (LSP) in achieving enhancement of corrosion resistance. The mechanism and capability of each technique in corrosion resistance is carefully discussed. Finally, an outlook of the development of laser surface technology for Mg alloy is further concluded, aiming to serve as a guide for further research both in industry applications and biomedical devices.

  14. Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    S.M. Fatemi-Varzaneh

    2013-12-01

    Full Text Available The study of nucleation mechanism of new grains during severe plastic deformation of magnesium alloys is of great importance to control the characteristics of final microstructures.  To investigate the role of discontinuous recrystallization, a wrought AZ31 magnesium alloy was deformed by accumulative back extrusion process at 330 °C.  The obtained microstructures were studied using optical and field emission microscopy as well as electron back scattered diffraction techniques.  The results demonstrated that the fine and ultrafine grains formed along the prior grain boundaries yielding a bimodal structure.  The EBSD analysis showed that the new grains exhibit a similar basal texture to deformed grains, which may confirm the operation of strain induced boundary migration mechanism.

  15. Direct electroless Ni-P plating on AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LI Zhong-hou; QU Yu-ping; ZHENG Feng; DAI A-gan

    2006-01-01

    An electroless Ni-P plating treatment was applied on AZ91D magnesium alloy to improve its corrosion resistance. Optimum pretreatment conditions and optimum bath of electroless nickel plating for magnesium alloy were found through many experiments. In order to avoid bother of pre-plating medium layer, a set of procedure of direct electroless Ni-P under the acid condition was investigated. The properties of the coating with 10% phosphorus were investigated. The results show that a coating with high hardness, low porosity and good adhesive strength is obtained. X-ray diffraction patterns show that the structure of the coating is an amorphous phase. After annealing at 400 ℃, the amorphous phase of Ni-P is transformed to crystalline phases,and some intermetallics as Ni3P and Ni5P2 are deposited from Ni -P solid solution along with an enhancing hardness from Hv 450 to Hv 910.

  16. Preparation of Permanent Mold Coating Using Magnesia Powder for Magnesium Alloys

    Science.gov (United States)

    Guo, Guangsi; Wang, Guangtai; Yu, Haifeng; Ye, Sheng

    A kind of permanent mold coating for magnesium alloy was developed using magnesia powder and diatomite as refractory aggregate. The properties of the coating were tested and analyzed by various ingredients. The final ingredient was determined through the tests which are to find out the optimal proportion of two kinds of aggregate and the influences to coating properties by changing the proportion of binder and suspending agents. The experimental results shown that the permanent mold coating performed good properties on magnesium alloys when the optimized ratio of magnesia powder and diatomite was 6: 4, and the integrated property is very excellent when the coating was prepared with 2 percent of sodium bentonite, 0.4 percent of CMC, 7 percent of sodium hexametaphosphate, and 7 percent of sodium silicate. The excellent performance has also been proved by actual casting test.

  17. Surface Properties of AZ31B Magnesium Alloy by Oxygen Plasma Immersion Ion Implantation

    Institute of Scientific and Technical Information of China (English)

    WEI Chunbei; GONG Chunzhi; TIAN Xiubo; YANG Shiqin; Ricky K.Y.Fu; Paul K.CHU

    2009-01-01

    Oxygen plasma immersion ion implantation(PIII)has been conducted on AZ31B magnesium alloy using different bias voltages.The modified layer is mainly composed of MgO and some MgAl2O4.Results form Rutherford backscattering spectrometry(RBS)and X-ray photoelectron spectroscopy(XPS)indicate that the bias voltage has a significant impact on the structure of the films.The oxygen implant fluences and the thickness of the implanted layer increase with higher bias voltages.A high bias voltage such as 60 kV leads to an unexpected increments in the oxygen-rich layer's thickness compared to those of the samples implanted at 20 kV and 40 kV.The hardness is hardly enhanced by oxygen PIII.The corrosion resistance of magnesium alloy may be improved by a proper implantation voltage.

  18. Effect of cerium on ignition point of AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    Zhao Hongjin; Zhang Yinghui; Kang Yonglin

    2008-01-01

    The surface and interior temperature-time curves of blocky cerium modified AZ91D magnesium alloy were measured during a non-protective heating and melting process. Two inflection points with rapid increase in temperature were found on both curves, which corresponded to the formation of "auliflower" oxide on the surface and the occurrence of flame during melting. These two temperatures are therefore defined as oxidation point and ignition point, respectively.The interior temperature-time curve is similar to that measured on the surface except for a comparable time delay. The oxidation and ignition temperatures increase with Ce content, an average increase of 33℃ and 61℃ was found when Ce addition was about 1.0 wt %. However, the increasing rate of the oxidation and ignition temperature decreases with increasing Ce content. An addition of 0.6wt% Ce is recommended for ignition-resistant AZ91 magnesium alloy.

  19. Effect of cerium on ignition point of AZ91D magnesium alloy

    Directory of Open Access Journals (Sweden)

    Zhao Hongjin

    2008-02-01

    Full Text Available The surface and interior temperature-time curves of blocky cerium modified AZ91D magnesium alloy were measured during a non-protective heating and melting process. Two inflection points with rapid increase in temperature were found on both curves, which corresponded to the formation of “auliflower”oxide on the surface and the occurrence of flame during melting. These two temperatures are therefore defined as oxidation point and ignition point, respectively. The interior temperature-time curve is similar to that measured on the surface except for a comparable time delay. The oxidation and ignition temperatures increase with Ce content, an average increase of 33=and 61= was found when Ce addition was about 1.0 wt %. However, the increasing rate of the oxidation and ignition temperature decreases with increasing Ce content. An addition of 0.6wt% Ce is recommended for ignition-resistant AZ91 magnesium alloy.

  20. Preparation of Scandium-Bearing Master Alloys by Aluminum-Magnesium Thermoreduction

    Institute of Scientific and Technical Information of China (English)

    姜锋; 白兰; 尹志民

    2002-01-01

    The new preparation method of scandium-bearing master alloys, in which scandium oxide was fluorinated by reaction with NH4HF2 and then reduced by aluminum-magnesium in fused salt containing alkali and alkaline fluoride under atmosphere, was studied. The effect of sorts of metallic reductive and technique conditions such as reducing temperature and time on the recovery of Sc was discussed. When the liquid aluminum-magnesium was used as the reductive agent, the all-recovery exceeds 80% and the concentration of Sc in master alloy prepared exceeds 1.9%. The best reducing reaction temperature and time are 1100 K and 40 min respectively. The newly produced Sc from reduction combines with Al to produce the stable compound Al3Sc, so the reduction progress is sustained and the recovery of Sc is increased.

  1. Development of microarc oxidation process to improve corrosion resistance on AZ91HP magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rong-fa; SHAN Da-yong; HAN En-hou; GUO Shi-bo

    2006-01-01

    A new anodizing process,which does not contain chromate but can improve the corrosion resistance of magnesium alloys significantly,was developed using a microarc power supply. Surface morphology was observed and the coating was compact and ceramic-like. In addition,the corrosion resistance of samples before and after anodization by the new process and a method in US Patent 5470664 was compared by potentiodymaic polarization curves,electrochemical impedance spectroscopy (EIS) and salt spray test. The results show that the anodization can improve the corrosion resistance of magnesium alloy. The samples obtained by the new process and the method mentioned in the US Patent 5470664 achieve 9 and 7 rates after 336 h salt spray test,respectively.

  2. Friction and Adhesion in Dry Warm Forging of Magnesium Alloy with Coated Tools

    Science.gov (United States)

    Matsumoto, Ryo; Kawashima, Hiroaki; Osakada, Kozo

    In order to develop forging process of magnesium alloys without lubrication, frictional behavior of magnesium alloy AZ31B (Mg-3%Al-1%Zn) is evaluated by a tapered plug penetration test under dry condition. The cemented tungsten carbide (WC) plugs polished to be a mirror-like surface are coated with diamond-like carbon (DLC) and TiAlN by physical vapor deposition (PVD). The cylindrical hollow billets of AZ31B are penetrated by the tapered plugs at a temperature of 200°C. The surface roughness of the hole of the billet, the adhesion length of AZ31B on the plug surface and the penetration load are measured. Compared with WC and TiAlN coating, it is found that DLC coating is effective in preventing AZ31B from adhering to the tool surface and reducing the penetration load.

  3. Jnhmicro-texture of AZ31 Magnesium Alloy in Situ Tracking During Compressing Deformation

    Directory of Open Access Journals (Sweden)

    Wang Zhongtang

    2016-01-01

    Full Text Available Micro-texture evolvement mechanism of AZ31 magnesium alloy during compressing deformation had been studied in situ tracking method by EBSD(Electron backscatter diffraction. The micro-texture at same observation areas, which compressed three times continually at different deformation degree, had been investigated. The results presented that the micro-texture of AZ31 magnesium alloy rolling state is typical (0001 basic texture. When deformation degree was 11% and the temperature was 170ଌ, grains orientation changed remarkably, and most grains had been twined fully and little grains twined partially. The initial basical rolling texture weakened gradually, and twined grains tropism accorded with $ \\lt 10\\bar 10 \\gt $ and 86.3° $ \\lt \\bar 12\\bar 10 \\gt $ orientation.

  4. In vitro Study on Biodegradable AZ31 Magnesium Alloy Fibers Reinforced PLGA Composite

    Institute of Scientific and Technical Information of China (English)

    Y.H.Wu; N.Li; Y.Cheng; Y.F.Zheng; Y.Han

    2013-01-01

    AZ31 magnesium alloy fibers reinforced poly(lactic-co-glycolic acid) (PLGA) composites were prepared and their mechanical property,immersion corrosion behavior and biocompatibility were studied.The tensile test showed that with the addition of AZ31 fibers,the composites had a significant increment in tensile strength and elongation.For the direct cell attachment test,all the cells showed a healthy morphology and spread well on the experimental sample surfaces.The immersion results indicated that pH values of the immersion medium increased with increasing AZ31 fiber contents.All the in vitro experimental results indicated that this new kind of magnesium alloy fibers reinforced PLGA composites show a potential for future biomedical applications.

  5. Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Cui Xiufang [School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Li Qingfen [School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); Li Ying; Wang Fuhui [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Jin Guo [School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China)], E-mail: jg97721@yahoo.com.cn; Ding Minghui [School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China)

    2008-12-30

    In this paper, a new innoxious and pollution-free chemical protective coating for magnesium alloys, phytic acid conversion coating, was prepared. The conversion coatings are found to have high cover ratio and no cracks are found by atomic force microscopes (AFM) and scanning electron microscopy (SEM). The main elements of the conversion coatings are Mg, Al, O, P and C by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). The chemical state of the elements in the coatings was also investigated by Fourier transform infrared spectroscopy (FTIR). AES depth profile analysis suggests that the thickness of the conversion coating is about 340 nm. The corrosion resistance of the coatings was evaluated by polarization curves. The results indicate that the corrosion resistance for the conversion coated AZ91D magnesium alloys in 3.5% NaCl solution increases markedly. The mechanisms of corrosion resistance and coatings formation are also discussed.

  6. Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy

    Science.gov (United States)

    Cui, Xiufang; Li, Qingfen; Li, Ying; Wang, Fuhui; Jin, Guo; Ding, Minghui

    2008-12-01

    In this paper, a new innoxious and pollution-free chemical protective coating for magnesium alloys, phytic acid conversion coating, was prepared. The conversion coatings are found to have high cover ratio and no cracks are found by atomic force microscopes (AFM) and scanning electron microscopy (SEM). The main elements of the conversion coatings are Mg, Al, O, P and C by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). The chemical state of the elements in the coatings was also investigated by Fourier transform infrared spectroscopy (FTIR). AES depth profile analysis suggests that the thickness of the conversion coating is about 340 nm. The corrosion resistance of the coatings was evaluated by polarization curves. The results indicate that the corrosion resistance for the conversion coated AZ91D magnesium alloys in 3.5% NaCl solution increases markedly. The mechanisms of corrosion resistance and coatings formation are also discussed.

  7. Electroless Ni-P plating with a phytic acid pretreatment on AZ91D magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Cui Xiufang, E-mail: cuixf97721@yahoo.com.cn [School of Materials Science and Chemical Engineering, Harbin Engineering University, 145 Nantong St., Harbin 150001 (China); State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Jin Guo; Li Qingfen; Yang Yuyun [School of Materials Science and Chemical Engineering, Harbin Engineering University, 145 Nantong St., Harbin 150001 (China); Li Ying [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Wang Fuhui [School of Materials Science and Chemical Engineering, Harbin Engineering University, 145 Nantong St., Harbin 150001 (China); State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China)

    2010-05-15

    A phytic acid conversion film with especial functional groups was proposed as the pretreatment layer between Ni-P coating and AZ91D magnesium alloy substrate, to replace the traditional pretreatment. In the process, the silane coupling agent was adopted as connector between conversion film and palladium ion with catalysis. The microstructure of the phytic acid conversion coatings was observed using scanning electronic microscopy, while the composition and functional groups were analyzed by energy dispersive spectrometer and Fourier transform infrared spectroscopy. The bonding between Si-OH of the silane coupling agent and hydroxyl of phytic acid was validated by X-ray photoelectron spectroscopy, and the existence of palladium ion was also verified. The subsequent Ni-P deposited on the layer was also characterized by its structure, morphology, and corrosion resistance. The results show that the Ni-P coatings with the phytic acid pretreatment on AZ91D magnesium alloy have good corrosion resistance.

  8. Study of Coating Growth Behavior During the Plasma Electrolytic Oxidation of Magnesium Alloy ZK60

    Science.gov (United States)

    Qiu, Zhaozhong; Wang, Rui; Zhang, Yushen; Qu, Yunfei; Wu, Xiaohong

    2015-04-01

    Plasma electrolytic oxidation technique was used to coat ZK60 magnesium alloy in a silicate-based electrolyte. Effects of oxidation time on the morphology, phase structure, and corrosion resistance of the resulting coatings were systematically investigated by scanning electron microscopy, energy-dispersive spectrometry, x-ray diffraction, x-ray photoelectron spectroscopy, and potentiodynamic polarization. The main components of the inner and the outer coating layers were MgO and Mg2SiO4, respectively. It was also found that the oxidation time has a significant impact on the corrosion resistance properties of the coatings. The coating obtained within the oxidation time of 360 s exhibited a corrosion current of 7.6 × 10-8 A/cm2 in 3.5 wt.% NaCl solution, which decreased significantly when comparing with the pristine magnesium alloy.

  9. Corrosion resistance, composition and structure of RE chemical conversion coating on magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Golden yellow rare earths chemical conversion coating was obtained on the surface of magnesium alloy by immersing in cerium sulfate solution.The corrosion resistance of RE conversion coating was evaluated using immersion test and potentiodynamic polarization measurements in 3.5%NaCl solution.The morphologies of samples before corrosion and after corrosion were observed by SEM.The structures and compositions of the RE conversion coating were studied by means of XPS.XRD and IR.The results show that,the conversion coating consists of mainly two kinds of element Ce and O,the valences of cerium are+3 and+4.and OH exists in the coating.The anti-corrosion property of magnesium alloy is increased obviously by rare earths conversion coating,Its self-corrosion current density decreases and the coating has self-repairing capability in the corrosion process in 3.5%NaCl solution.

  10. Microstructure and corrosion property of AZ61 magnesium alloy by electromagnetic stirring

    Institute of Scientific and Technical Information of China (English)

    FANG Can-feng; ZHANG Xing-guo; JI Shou-hua; JIN Jun-ze; CHANG Yu-bao

    2005-01-01

    The influence of permanent-magnet-driven stirring during solidification on the microstructure and corrosion property of AZ61 magnesium alloy was investigated. The corrosion behaviour of AZ61 was studied in 3.5mol/L NaCl by measuring electrochemical polarization. The results show that the permanent-magnet stirring refines the microstructure of AZ61 magnesium alloy, which improves the precipitation amount and distribution uniformity of β phase and decreases the content of hydrogen, but it has less influence on the distribution uniformity of Zn. The change of precipitation amount of β phase influences the corrosive nature of the matrix, and it has no direct proportion with the corrosion resistance of the matrix.

  11. Hot deformation behavior of a spray-deposited AZ31 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LI Yongbing; CHEN Yunbo; CUI Hua; DING Jie; ZUO Lingli; ZHANG Jishan

    2009-01-01

    The flow stress behavior of an as-spray-deposited AZ31 magnesium alloy with fine grains was investigated by means of compression tests with a Gleeble 1500 thermal mechanical simulator at isothermal constant strain rates of 0.01, 0.1, 1.0, and 10 s-1; the testing temperatures ranged from 623 to 723 K. It is demonstrated that a linear equation can be fitted between the Zemer-Hollomon parameter Z and stress in a double-log scale. The effect of deformation parameters on the behavior of recrystallization was analyzed. Dynamic recrystallization (DRX) generally occurs at a higher temperature and at a lower strain rate. The constitutive equation of the spray-deposited AZ31 magnesium alloy is elevated temperatures due to the fine grain, which provides a large amount of nucleation sites and a high-diffnsivity path for the atom.

  12. Corrosion protection of AZ31 magnesium alloy treated with La3+ modified 3-methacryloxypropyltrimethoxysilane conversion film

    Institute of Scientific and Technical Information of China (English)

    乔英杰; 李文鹏; 王桂香; 张晓红

    2015-01-01

    This study demonstrated the influence of addition concentration of La3+ on the anti-corrosion behavior of a 3-methacry-loxypropyltrimethoxysilane (MPS) film formed on AZ31 magnesium alloy. The morphology and surface chemistry of the samples were evaluated through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), respectively. The corrosion resistance of the pre-treated AZ31 magnesium alloy was studied during immersion in 0.1 mol/L NaCl solution, using poten-tiodynamic polarization curves and electrochemical impedance spectra (EIS). In comparison to MPS film, the low concentration of La3+ ion modified silane layer exhibited a better anti-corrosion performance, nevertheless, the high concentration of La3+ ion modified was worse. Results showed that the preferable addition concentration of La3+ ion in the silane film was 5×10–4 mol/L in this experi-ment.

  13. Laser cladding of Al + Ir powders on ZM5 magnesium base alloy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Laser cladding of preplaced Al + Ir powders on a ZM5 magnesium alloy was performed to enhance the corrosion resistance of the ZM5 magnesium alloy. A metallurgical bond was obtained at the coating/substrate interface. The corrosion potential (Ecorr) of the laser cladded sample was 169 mV positive to that of the untreated ZM5 substrate, while the corrosion current (Icorr) was some one order of magnitude lower. The laser cladded sample, unlike the untreated ZM5 substrate,showed a passive region in the polarization plot. Immersion tests confirmed that the corrosion resistance of the laser cladded ZM5 sample was significantly enhanced in 3.5 wt.% NaCl solution. The Al-rich phases of AlIr, Mg17Al12, and Al formed in the cladding layer and the rapid solid characteristics were contributed to the improved corrosion behavior of the coating.

  14. Recrystallization behaviour of fine-grained magnesium alloy after hot deformation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Annealing behaviors of hot-deformed magnesium alloy AZ31 were studied at temperatures from 300 to 673 K by optical and SEM/EBSD metallographic observation. Temperature dependence of the average grain size(D) is categorized into three temperature regions, i.e. an incubation period for grain growth, rapid grain coarsening, and normal grain growth. The number of fine grains per unit area, however, is reduced remarkably even in incubation period. This leads to grain coarsening taking place continuously in the whole temperature regions. In contrast, the deformation texture scarcely changes even after full annealing at high temperatures. It is concluded that the annealing processes operating in hot-deformed magnesium alloy with continuous dynamic recrystallized grain structures can be mainly controlled by grain coarsening accompanied with no texture change, that is, continuous static recrystallization.

  15. Interactive effect of cerium and aluminum on the ignition point and the oxidation resistance of magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Lin Pengyu [Key Laboratory of Automobile Materials of Ministry of Education, School of Materials Science and Engineering, Nanling Campus of Jilin University, Changchun Jilin 130025 (China)], E-mail: linpengyu2000@yahoo.com.cn; Zhou Hong; Li Wei; Li Wenping; Sun Na [Key Laboratory of Automobile Materials of Ministry of Education, School of Materials Science and Engineering, Nanling Campus of Jilin University, Changchun Jilin 130025 (China); Yang Rong [Public Mathematics Teaching and Research Center, College of Mathematics, Qianwei Campus of Jilin University, Changchun Jilin 130012 (China)

    2008-09-15

    This paper focused on the interactive effect of cerium (Ce) addition and aluminum (Al) content in magnesium alloy on ignition point and oxidation resistance. Ce content played an important role in improving the oxidation resistance of Mg alloy. Ignition point ascended with increasing Ce content. 0.25 wt% Ce content in Mg alloys could greatly improve tightness of the oxide film of Mg alloys. However, when Ce content in the alloy exceeded its solid solubility, ignition point descended. Furthermore, Al content in the alloy also influenced the ignition point. The higher the Al content was, the lower the ignition point.

  16. Influence of neodymium on high cycle fatigue behavior of die cast AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    杨友; 李雪松

    2010-01-01

    High cycle fatigue behavior of die cast AZ91D magnesium alloy with different Nd contents was investigated.Axial mechanical fatigue tests were conducted at the stress ratio R=0.1 and the fatigue strength was evaluated using up-to-down load method on specimens of AZ91D with different Nd contents.The results showed that the grain of AZ91D alloy was refined,the size and amount of β-Mg17Al12 phase decreased and distributed uniformly with increasing Nd content.At the number of cycles to failure,Nf=107,the fatigue...

  17. Microstructures and Properties of Aluminium-Magnesium Alloys with Additions of Manganese, Zirconium and Scandium

    OpenAIRE

    Johansen, Arve

    2000-01-01

    The present work reports on the effect of Mn-, Zr- and Sc-additions upon hot deformation properties, recrystallization properties and mechanical properties for different temper conditions of Al-Mg alloys. It can be stated that the addition of Mn, Zr and Sc improves the recrystallization properties and the mechanical properties of Al-Mg alloys. It should be emphasised that the precipitation of the metastable cubic Al3Zr and the stable cubic Al3(Sc,Zr) is favourable in an aluminium-magnesium ma...

  18. Microstructures and Properties of Aluminium-Magnesium Alloys with Additions of Manganese, Zirconium and Scandium

    OpenAIRE

    Johansen, Arve

    2000-01-01

    The present work reports on the effect of Mn-, Zr- and Sc-additions upon hot deformation properties, recrystallization properties and mechanical properties for different temper conditions of Al-Mg alloys.It can be stated that the addition of Mn, Zr and Sc improves the recrystallization properties and the mechanical properties of Al-Mg alloys. It should be emphasised that the precipitation of the metastable cubic Al3Zr and the stable cubic Al3(Sc,Zr) is favourable in an aluminium-magnesium mat...

  19. On the use of magnesium alloys for aerospace and defense mirrors

    Science.gov (United States)

    Woodard, Kenneth S.; Comstock, Lovell E.; Wamboldt, Leonard; Crifasi, Joseph C.

    2014-06-01

    Extreme light-weighting is important in many aerospace and defense applications but the cost associated with beryllium or other exotic materials can be prohibitive. The current standard for producing cost effective, high performance mirrors is to diamond machine mirror blanks from aluminum alloy stock. About 80% material removal is the limit for geometrical lightweighting while still retaining the structural integrity required for optical fabrication. To reduce weight further requires alternative materials. This paper summarizes the status of diamond machined finishing and coating of magnesium alloys to produce cost effective, lightweight mirrors with high, broadband reflectivity and low scatter finish.

  20. Microstructure and properties of oxalate conversion coating on AZ91D magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    JIANG Yong-feng; ZHOU Hai-tao; ZENG Su-min

    2009-01-01

    The oxalate coating formed on AZ91D magnesium alloy by chemical conversion treatment methods in oxalate salt solutions was investigated.The surface morphologies and chemical composition of coating were examined using scanning electron microscopy (SEM) equipped with energy dispersive analysis of X-ray (EDX).Electrochemical impedance spectroscopy (EIS),potentiodynamic polarization curves and salt spray tests were employed to evaluate corrosion protection of the coating to substrate in 5% NaCl solution.The mechanism of coating formations was also considered in details.The results indicate that a compact and dense surface morphology with fine particle clusters of the oxalate coating on magnesium alloy is presented,which mainly consists of oxide or/and organic of Mg,Al and Zn.And the anti-corrosion of the magnesium after oxalate conversion treatment is better than that of the magnesium substrate.The results of salt spray test for oxalate coating is evaluated as Grade 9 according to ASTM B117.The electric resistance of oxalate chemical conversion coating to substrate is below 0.1Ω.

  1. Microstructural Effects on the Spall Properties of ECAE-Processed AZ31B Magnesium Alloy

    Science.gov (United States)

    2016-10-01

    of in- termetallic inclusions and their weak interface strengths. © 2016 Elsevier Ltd. All rights reserved . 1. Introduction Magnesium (Mg) and its...microstructure and spall behavior because of the process-induced cracking of intermetallic inclusions and their weak interface strengths. 15. SUBJECT...target of the manufactur- ing industry, leading to the development of advanced alloys with enhanced properties. These require systematic studies of pure

  2. Texture evolution during thermomechanical processing in rare earth free magnesium alloys

    Science.gov (United States)

    Miller, Victoria Mayne

    The use of wrought magnesium alloys is highly desirable for a wide range of applications where low component weight is desirable due to the high specific strength and stiffness the alloys can achieve. However, the implementation of wrought magnesium has been hindered by the limited room temperature formability which typically results from deformation processing. This work identifies opportunities for texture modification during thermomechanical processing of conventional (rare earth free) magnesium alloys via a combination of experimental investigation and polycrystal plasticity simulations. During deformation, it is observed that a homogeneous distribution of coarse intermetallic particles efficiently weakens deformation texture at all strain levels, while a highly inhomogeneous particle distribution is only effective at high strains. The particle deformation effects are complemented by the addition of alkaline earth solute, which modifies the relative deformation mode activity. During recrystallization, grains with basal orientations recrystallize more readily than off-basal grains, despite similar levels of internal misorientation. Dislocation substructure investigations revealed that this is a result of enhanced nucleation in the basal grains due to the dominance of prismatic slip. This dissertation identifies avenues to enhance the potential formability of magnesium alloys during thermomechanical processing by minimizing the evolved texture strength. The following are the identified key aspects of microstructural control: -Maintaining a fine grain size, likely via Zener pinning, to favorably modify deformation mode activity and homogenize deformation. -Developing a coarse, homogeneously distributed population of coarse intermetallic particles to promote a diffuse deformation texture. -Minimizing the activity of prismatic slip to retard the recrystallization of grains with basal orientations, allowing the development of a more diffuse recrystallization texture.

  3. Effects of magnetic fields on the phosphate conversion coating of AZ91D magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Jin Hualan; Peng Wenyi; Guo Hongmin [School of Materials Science and Engineering, Nanchang University, Nanchang 330031 (China); Yang Xiangjie, E-mail: hualanjin@ncu.edu.c [School of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330031 (China)

    2010-01-01

    An external high parallel magnetic fields (MF) was imposed on the barium phosphate process of AZ91D magnesium alloy. The influences of the permanent MF on the morphology, the phase composition and the corrosion resistance of the barium phosphate coatings were studied using scanning electron microscope, X-ray diffraction, salt spay test. The results show that the coatings with MF are more compact, uniform, and smooth, and have better the corrosion resistance than without MF.

  4. NANOMECHANICAL AND CORROSION PROPERTIES OF ZK60 MAGNESIUM ALLOY IMPROVED BY GD ION IMPLANTATION

    OpenAIRE

    XUE WEI TAO; ZHANG ZHONG WANG; XIAO BO ZHANG; ZHI XIN BA; YA MEI WANG

    2014-01-01

    Gadolinium (Gd) ion implantation with doses from 2.5 × 1016 to 1 × 1017 ions/cm2 into ZK60 magnesium alloy was carried out to improve its surface properties. X-ray photoelectron spectroscopy (XPS), nanoindenter, electrochemical workstation and scanning electron microscope (SEM) were applied to analyze the chemical composition, nanomechanical properties and corrosion characteristics of the implanted layer. The results indicate that Gd ion implantation produces a hybrid-structure protective lay...

  5. Microstructure Characteristics of the Eutectics of Die Cast AM60B Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    Mengwu Wu; Shoumei Xiong

    2011-01-01

    Under the cold-chamber high pressure die casting (HPDC) process, samples were produced with AM60B magnesium alloy to investigate the microstructure characteristics of the eutectics, especially focusing on the constitution, morphology and distribution of the eutectics over cross section of the castings. Attentions were also paid to study the effect of heat treatment on the eutectics in the die castings. Based on experimental analysis using optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), it was determined that fully divorced eutectics consisting of a-Mg and β-Mg17Al12 appeared at the grain boundary of the primary α-Mg in the as-cast microstructure. Islands and networks of β-Mg17Al12 phase were observed in the central region of the castings, while the β-Mg17Al12 phase revealed a more dispersed and granular morphology on the surface layer. The two phases ratio β/α in the central region of the castings was approximately 10%, which was higher than that on the surface layer. Besides, the defect bands contained a higher percentage of the eutectics than the adjacent regions. After aging treatment (T6), only a-Mg phase was detected by XRD in the AM60B magnesium alloy, though a small amount of precipitated β-Mg17Al12 phase was observed at the grain boundary. In contrast to the microstructure of die cast AZ91D magnesium alloy under the same T6 heat treatment, no discontinuous precipitation of the β-Mg17Al12 phase was observed in AM60B magnesium alloy die castings.

  6. A Generic Metallographic Preparation Method for Magnesium Alloys

    Science.gov (United States)

    2013-05-01

    structure in castings. Immerse sample 5–15 s. For higher Al content, use 20-g tartaric acid . 16: 100-ml water 2–11-g citric acid For Mg, Mg-Cu...and Mg die-casting alloys. Immerse sample about 30 s. 17: 100-ml water 5–10-g citric acid For Mg-Mn wrought alloys and solution-treated castings...speed and direction, cycle time, lubricating fluid selection, sample down force, and water rinse. The use of the AD-5 fluid dispenser facilitates

  7. Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency

    Directory of Open Access Journals (Sweden)

    Jing Guo

    2016-10-01

    Full Text Available Wire arc additive manufacturing (WAAM offers a potential approach to fabricate large-scale magnesium alloy components with low cost and high efficiency, although this topic is yet to be reported in literature. In this study, WAAM is preliminarily applied to fabricate AZ31 magnesium. Fully dense AZ31 magnesium alloy components are successfully obtained. Meanwhile, to refine grains and obtain good mechanical properties, the effects of pulse frequency (1, 2, 5, 10, 100, and 500 Hz on the macrostructure, microstructure and tensile properties are investigated. The results indicate that pulse frequency can result in the change of weld pool oscillations and cooling rate. This further leads to the change of the grain size, grain shape, as well as the tensile properties. Meanwhile, due to the resonance of the weld pool at 5 Hz and 10 Hz, the samples have poor geometry accuracy but contain finer equiaxed grains (21 μm and exhibit higher ultimate tensile strength (260 MPa and yield strength (102 MPa, which are similar to those of the forged AZ31 alloy. Moreover, the elongation of all samples is above 23%.

  8. Equal channel angular deformation process and its neuro-simulation for fine-grained magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    LUO Peng(罗蓬); HU Qiao-dan(胡侨丹); WU Xiao-lin; XIA Ke-nong

    2004-01-01

    Fine-grained structure of as-cast magnesium AM60 alloy was obtained by means of equal channel angular deformation(ECAD) technique. Through analyzing the relationship between the load and the displacement under different working conditions, it is demonstrated that employment of back-pressure, multi-passages of deformation, and speed of deformation are the main factors representing ECAD working condition. As for ECAD process, a network composed of nonlinear neuro-element based on error back-propagation learning algorithm is launched to set up a processing mapping module for dynamic forecasting of load summit under different working conditions. The experimental results show that back-pressure, multi-passages and deforming speed have strong correlation with ECAD processing characteristics. On the metallographs of AM60 alloy after multi-passes ECAD, a morphology that inter-metallic compound Mg17 Al12 precipites on magnesium matrix without discrepancy, which evolves from coarse casting ingot microstructure, is observed. And the grains are refined significantly under accumulated severe shear strain.The study demonstrates feasibility of ECAD by using as-cast magnesium alloy directly, and launches an intelligent neuro-simulation module for quantitative analysis of its process.

  9. Yield asymmetry design of magnesium alloys by integrated computational materials engineering

    Energy Technology Data Exchange (ETDEWEB)

    Li, Dongsheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Khaleel, Mohammad [Qatar Foundation Research adn Development (Qatar); Ahzi, Said [Univ. of Strasbourg (France)

    2013-11-01

    Deformation asymmetry of magnesium alloys is an important factor on machine design in the automobile industry. Represented by the ratio of compressive yield stress (CYS) against tensile yield stress (TYS), deformation asymmetry is strongly related to texture and grain size. A polycrystalline viscoplasticity model, modified intermediate Φ-model, is used to predict the deformation behavior of magnesium alloys with different grain sizes. Validated with experimental results, integrated computational materials engineering is applied to find out the route in achieving desired asymmetry via thermomechanical processing. For example, CYS/TYS in rolled texture is smaller than 1 under different loading directions. In other textures, such as extruded texture, CYS/TYS is large along the normal direction. Starting from rolled texture, asymmetry will increase to close to 1 along the rolling direction after being compressed to a strain of 0.2. Our modified Φ-model also shows that grain refinement increases CYS/TYS. Along with texture control, grain refinement also can optimize the yield asymmetry. After the grain size decreases to a critical value, CYS/TYS reaches to 1 because CYS increases much faster than TYS. By tailoring the microstructure using texture control and grain refinement, it is achievable to optimize yield asymmetry in wrought magnesium alloys.

  10. High cycle fatigue properties of die-cast magnesium alloy AZ91D-1%MM

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The high cycle fatigue properties of the die-cast magnesium alloy AZ91D containing 1%mischmetal(mass fraction)at a fatigue ratio of 0.1 were investigated.The difference in the microstructure between the skin and core region of the die-cast magnesium alloy was analyzed by optical microscopy.The mechanical property tests indicate that the values of the tensile strength,elongation and hardness are 185 MPa,1.5%and HBS 70±3 at room temperature,respectively.The p-S-N curve(p=50%)of the die-cast magnesium alloy AZ91D-1%MM is determined and the mean fatigue strength corresponding to 3.8×105cycles is 70 MPa.A linear relation between S and Np in log scale between 103 and 106 cycles is written with a equation.The mechanical properties are influenced by the casting defects.The fatigue life of the samples with minor defects is near to the upper limit of the fatigue life data.The fatigue fracture surface of the samples with minor defects possesses the mixed characteristics of quasi-cleavage,lacerated ridge and dimple and it is briule fracture mode as a whole.

  11. Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with carbide tool

    Directory of Open Access Journals (Sweden)

    Kaining Shi

    2016-01-01

    Full Text Available Magnesium alloy has attracted more attentions due to its excellent mechanical properties. However, in process of dry cutting operation, many problems restrict its further development. In this article, the effect of cutting parameters on machinabilities of magnesium alloy is explored under dry milling condition. This research is an attempt to investigate the impact of cutting speed at multiple feed rates on cutting force and surface roughness, while a statistical analysis is adopted to determine the influential intensities accurately. The results showed that cutting force is affected by the positively constant intensity from feed rate and the increasingly negative intensity from cutting speed. In contrast, surface roughness is determined by the gradually increasing negative tendency from feed rate and the positive effect with constant intensity from cutting speed. Within the range of the experiments, feed rate is the leading contribution for cutting force while the cutting speed is the dominant factor for surface roughness according to the absolute intensity values. Meanwhile, the trends of influencing intensities between cutting force and surface roughness are opposite. Besides, it is also found that in milling magnesium alloy, chip morphology is highly sensitive to cutting speed while the chip quality mainly depends on feed rate.

  12. Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: a general review.

    Science.gov (United States)

    Wang, Jiali; Tang, Jian; Zhang, Peng; Li, Yangde; Wang, Jue; Lai, Yuxiao; Qin, Ling

    2012-08-01

    As a bioabsorbable metal with mechanical properties close to bone, pure magnesium or its alloys have great potential to be developed as medical implants for clinical applications. However, great efforts should be made to avoid its fast degradation in vivo for orthopedic applications when used for fracture fixation. Therefore, how to decease degradation rate of pure magnesium or its alloys is one of the focuses in Research and Development (R&D) of medical implants. It has been recognized that surface modification is an effective method to prevent its initial degradation in vivo to maintain its desired mechanical strength. This article reviews the recent progress in surface modifications for prevention of fast degradation of magnesium or its alloys using in vitro testing model, a fast yet relevant model before moving towards time-consuming and expensive in vivo testing. Pros and cons of various surface modifications are also discussed for the goal to design available products to be applied in clinical trials. Copyright © 2012 Wiley Periodicals, Inc.

  13. Biodegradation behavior of micro-arc oxidized AZ31 magnesium alloys formed in two different electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Seyfoori, A. [School of Metallurgical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Mirdamadi, Sh., E-mail: Mirdamadi@iust.ac.ir [School of Metallurgical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Khavandi, A.; Raufi, Z. Seyed [School of Metallurgical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer Phosphate coating has lesser degradation rate than silicate coating in r-SBF solution. Black-Right-Pointing-Pointer Farringtonite phase is chemically more stable than forsterite phase in SBF solution. Black-Right-Pointing-Pointer Apatite forming ability of forsterite containing coating is better than farringtonite containing film. Black-Right-Pointing-Pointer The hydrophilisity nature of silicate film on magnesium alloy with respect to its roughness, is greater than phosphate film. - Abstract: Degradation behavior of coated magnesium alloys is among most prominent factors for their biomedical applications. In this study, bio-corrosion behavior of micro-arc oxidized magnesium AZ31 alloys formed in silicate and phosphate baths was investigated in r-SBF medium. For this purpose polarization behavior and open circuit profile of the coated samples were achieved by electrochemical and immersion tests, respectively. Moreover, the morphology and composition of the coatings were evaluated before and after immersion test using scanning electron microscopy, X-ray diffraction and energy dispersive spectroscopy. The results showed that the phosphate film had better corrosion resistance and greater thickness than silicate film and, in turn, the lesser degradability in SBF solution, so that Ca{sup 2+} and PO{sub 4}{sup 3-} containing compounds were more abundant on silicate film than phosphate film. Moreover phosphate film had greater surface roughness and lesser hydrophilic nature.

  14. Fabrication of biomimetic hydrophobic films with corrosion resistance on magnesium alloy by immersion process

    Energy Technology Data Exchange (ETDEWEB)

    Liu Yan, E-mail: liuyan2000@jlu.edu.cn [Key Laboratory for Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022 (China); Lu Guolong; Liu Jindan; Han Zhiwu; Liu Zhenning [Key Laboratory for Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022 (China)

    2013-01-01

    Highlights: Black-Right-Pointing-Pointer We have developed a facile and simple method of creating a hydrophobic surface on a magnesium alloy by an immersion process at room temperature. Black-Right-Pointing-Pointer The distribution of the micro-structure and the roughness of the surface play critical roles in transforming from hydrophilic to hydrophobic. Black-Right-Pointing-Pointer The hydrophobic coatings possess better corrosion resistance than magnesium alloy matrix. - Abstract: Biomimetic hydrophobic films of crystalline CeO{sub 2} were prepared on magnesium alloy by an immersion process with cerium nitrate solution and then modified with DTS (CH{sub 3}(CH{sub 2}){sub 11}Si(OCH{sub 3}){sub 3}). The CeO{sub 2} films fabricated with 20-min immersion yield a water contact angle of 137.5 {+-} 2 Degree-Sign , while 20-min DTS treatment on top of CeO{sub 2} can further enhance the water contact angle to 146.7 {+-} 2 Degree-Sign . Then corrosion-resistant property of these prepared films against NaCl solution was investigated and elucidated using electrochemical measurements.

  15. Preparation and characterization of the micro-arc oxidation composite coatings on magnesium alloys

    Directory of Open Access Journals (Sweden)

    Yanfeng Ge

    2014-12-01

    Full Text Available The magnesium alloys attract the light-weight manufacture due to its high strength to weight ratio, however the poor corrosion resistance limits the application in automobile industry. The Micro-arc Composite Ceramic (MCC coatings on AZ91D magnesium alloys were prepared by Micro-arc Oxidation (MAO and electrophoresis technologies. The microstructure, corrosion resistance, abrasion resistance, stone impact resistance and adhesion of MCC coatings were studied respectively. The cross section morphologies showed that the outer organic coating was filled into the hole on surface of MAO coating, and it acted as a shelter against corrosive products. The copper-accelerated acetic acid salt spray Test, abrasion resistance test, stone impact resistance test, thermal shock resistance test and adhesion test were used to evaluate the protective characterization by the third testing organization which approved by GM. The test results showed the composite coatings meet all the requirements. The MCC coating on Mg presents excellent properties, and it is a promising surface treatment technology on magnesium alloys for production vehicles.

  16. Improvement of corrosion resistance of AZ91D magnesium alloy by gadolinium addition

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xue-hua; WEI Zhong-ling; CHEN Qiu-rong; GAN Fu-xing

    2006-01-01

    Based on the previous investigation on beneficial introduction of holmium into magnesium alloy, the effect of gadolinium, an adjacent rare earth element, on corrosion resistance was examined. The corrosion behavior of two Mg-9Al-Gd alloys (Mg-9Al-0.45Gd and Mg-9Al-1.43Gd) was evaluated and compared with that of Mg-9Al alloy without Gd by means of specimen mass loss and hydrogen evolution in 3.5% NaCl solution saturated with Mg(OH)2. The Gd-containing alloys exhibit enhanced corrosion resistance with respect to the plain Mg-9Al alloy. The microstructures of Mg-9Al alloy and Mg-9Al-0.45 Gd alloy were observed by electron probe microanalysis (EPMA) and energy dispersion spectroscopy (EDS). The alloys with Gd addition show a microstructure characterized by α phase solid solution, surrounded by minor amount of β phase and more grain-like Gd-containing phase. To illustrate the involved mechanism their polarization curves were recorded. The electrochemical investigations reveal that Gd addition shifts the corrosion potential of the alloy towards active, as Gd containing phase is more active and hence less cathodic. As a result, the micro-galvanic corrosion is suppressed. Moreover corrosion product films formed on the Gd containing alloys are more compact and provide a better protective effectiveness than that on the alloy without Gd against corrosion. Repassivation measurements in mixture solution of 0.21 mol/L K2CrO4+0.6 mol/L NaCl also verify the beneficial role of Gd addition. Based on the present preliminary analysis, both the deposited Gd-containing phases and corrosion product films are believed to be responsible for the improved corrosion behaviour due to Gd addition.

  17. Electrolytic deposition of aluminium-magnesium-alloys from electrolytes containing organo-aluminium complexes; Elektrolytische Abscheidung von Aluminium-Magnesium-Legierungen aus aluminiumorganischen Komplexelektrolyten

    Energy Technology Data Exchange (ETDEWEB)

    Lehmkuhl, H.; Mehler, K.; Bongard, H.; Tesche, B. [Max-Planck-Institut fuer Kohlenforschung, Muelheim an der Ruhr (Germany); Reinhold, B. [Audi AG, Ingolstadt (Germany). Technische Entwicklung

    2000-10-01

    The galvanic deposition of pure aluminium from fluoride-containing electrolytes has been developed further and for the first time aluminium and magnesium have been deposited from a toluene-solution of a halide-free organo-aluminium complex electrolyte. The rate of incorporation of magnesium can be controlled over a wide range by either adjusting the composition of the aluminium-magnesium anode or by using separate aluminium or magnesium anodic circuits. The current efficiency for both anode and cathode approaches 100%. The resulting coating is optically attractive and, depending upon the magnesium-content or the cathodic current density, can be formed as a dull or polished surface. Investigations using an electron microscope show that the surface, in contrast to that of pure aluminium, consists of spherical particles. The aluminium-magnesium coating provides excellent protection against the corrosion of magnesium components. Electrochemical investigations using, for example 25% by weight magnesium incorporation, indicate a pronounced passivity interval compared to the alloy AZ91hp. In contrast to galvanic zinc-plated and silicate-sealed examples, cyclic corrosion tests on screws simulating 10 years of exposure, show no corrosion. (orig.)

  18. AZ91C magnesium alloy modified by Cd

    DEFF Research Database (Denmark)

    Shabadi, R.; Ambat, Rajan; Dwarakadasa, E.S.

    2014-01-01

    In the present work, the effect of Cd on the microstructure, mechanical properties and general corrosion behaviour of AZ91C alloys was investigated. Addition of Cd was found not to be efficient in modifying/refining the microstructure or β-phase. A morphology change in β-phase from fine continuou...

  19. Experimental and Numerical Study on the Deformation Mechanism in AZ31B Mg Alloy Sheets Under Pulsed Electric-Assisted Tensile and Compressive Tests

    Science.gov (United States)

    Lee, Jinwoo; Kim, Se-Jong; Lee, Myoung-Gyu; Song, Jung Han; Choi, Seogou; Han, Heung Nam; Kim, Daeyong

    2016-06-01

    The uniaxial tensile and compressive stress-strain responses of AZ31B magnesium alloy sheet under pulsed electric current are reported. Tension and compression tests with pulsed electric current showed that flow stresses dropped instantaneously when the electric pulses were applied. Thermo-mechanical-electrical finite element analyses were also performed to investigate the effects of Joule heating and electro-plasticity on the flow responses of AZ31B sheets under electric-pulsed tension and compression tests. The proposed finite element simulations could reproduce the measured uniaxial tensile and compressive stress-strain curves under pulsed electric currents, when the temperature-dependent flow stress hardening model and thermal properties of AZ31B sheet were properly described in the simulations. In particular, the simulation results that fit best with experimental results showed that almost 100 pct of the electric current was subject to transform into Joule heating during electrically assisted tensile and compressive tests.

  20. Textures, microstructures, anisotropy and formability of aluminum-manganese-magnesium and aluminum-magnesium alloys

    Science.gov (United States)

    Liu, Jiantao

    In this dissertation work, the microstructure and texture evolution of continuous cast (CC) and direct chill (DC) cast Al-Mn-Mg (AA 3105 and AA 3015) and Al-Mg (AA 5052) alloys during cold rolling and annealing are systematically investigated. Macrotexture analyses were based on three-dimensional orientation distribution functions (ODFs) calculated from incomplete pole figures from X-ray diffraction by using arbitrarily defined cell (ADC) and series expansion methods. A new technique, electron backscatter diffraction (EBSD), was adopted for microtexture and mesotexture investigation. The anisotropy and formability of Al-Mn-Mg and Al-Mg alloys are correlated to the texture results. For aluminum alloys studied in this work, a stronger Cube orientation is observed in DC hot band than in CC hot band after complete recrystallization. alpha and beta fibers become well developed beyond 50% cold rolling in both CC and DC aluminum alloys. The highest intensity along the beta fiber (skeleton line) is located between the Copper and the S orientations in both materials after high cold rolling reductions. In both CC and DC aluminum alloys, a cell structure develops with the indication of increasing CSL Sigma1 boundaries during the early stages of cold rolling. There is no evidence of the development of twin boundaries (Sigma3, Sigma9, Sigma27a & 27b) in either CC or DC aluminum alloys when the cold rolling reductions are less than 40%. The R and Cube textures are dominant recrystallization texture components in CC and DC AA 5052 alloys. The volume fraction of the Cube component is increased by increasing cold rolling reduction and annealing temperature but not by increasing annealing time while the volume fraction of the R component is only increased by increasing cold rolling reduction. Stronger Cube and R orientations are found at the surface layer than at half-thickness layer of cold rolled hot bands after annealing. The Cube and P textures are dominant recrystallization

  1. Pseudo-creep in Shape Memory Alloy Wires and Sheets

    Science.gov (United States)

    Russalian, V. R.; Bhattacharyya, A.

    2017-10-01

    Interruption of loading during reorientation and isothermal pseudoelasticity in shape memory alloys with a strain arrest ( i.e., holding strain constant) results in a time-dependent evolution in stress or with a stress arrest ( i.e., holding stress constant) results in a time-dependent evolution in strain. This phenomenon, which we term as pseudo-creep, is similar to what was reported in the literature three decades ago for some traditional metallic materials undergoing plastic deformation. In a previous communication, we reported strain arrest of isothermal pseudoelastic loading, isothermal pseudoelastic unloading, and reorientation in NiTi wires as well as a rate-independent phase diagram. In this paper, we provide experimental results of the pseudo-creep phenomenon during stress arrest of isothermal pseudoelasticity and reorientation in NiTi wires as well as strain arrest of isothermal pseudoelasticity and reorientation in NiTi sheets. Stress arrest in NiTi wires accompanied by strain accumulation or recovery is studied using the technique of multi-video extensometry. The experimental results were used to estimate the amount of mechanical energy needed to evolve the wire from one microstructural state to another during isothermal pseudoelastic deformation and the difference in energies between the initial and the final rest state between which the aforementioned evolution has occurred.

  2. Material characterization and finite element simulations of aluminum alloy sheets during non-isothermal forming process

    Science.gov (United States)

    Zhang, Nan

    The utilization of more non-ferrous materials is one of the key factors to succeed out of the constantly increasing demand for lightweight vehicles in automotive sector. Aluminum-magnesium alloys have been identified as the most promising substitutions to the conventional steel without significant compromise in structural stiffness and strength. However, the conventional forming methods to deform the aluminum alloy sheets are either costly or insufficient in formability which limit the wide applications of aluminum alloy sheets. A recently proposed non-isothermal hot stamping approach, which is also referred as Hot Blank - Cold Die (HB-CD) stamping, aims at fitting the commercial grade aluminum alloy sheets, such as AA5XXX and AA7XXX, into high-volume and cost-effective production for automotive sector. In essence, HB-CD is a mutation of the conventional hot stamping approach for boron steel (22MnB5) which deforms the hot blank within the cold tool set. By elevating the operation temperature, the formability of aluminum alloy sheets can be significantly improved. Meanwhile, heating the blank only and deforming within the cold tool sets allow to reduce the energy and time consumed. This research work aims at conducting a comprehensive investigation of HB-CD with particular focuses on material characterization, constitutive modeling and coupled thermo-mechanical finite element simulations with validation. The material properties of AA5182-O, a popular commercial grade of aluminum alloy sheet in automotive sector, are obtained through isothermal tensile testing at temperatures from 25° to 300°, covering a quasi-static strain-rate range (0.001--0.1s-1). As the state-of-the-art non-contact strain measurement technique, digital image correlation (DIC) system is utilized to evaluate the stress-strain curves as well as to reveal the details of material deformation with full-field and multi-axis strain measurement. Material anisotropy is characterized by extracting the

  3. The Effect of Variable Blank-Holder Forces on the Formability of Aluminum Alloy Sheets during Sheet Metal Forming

    Institute of Scientific and Technical Information of China (English)

    Sun Chengzhi; Chen Guanlong; Lin Zhongqin

    2004-01-01

    In this paper, the effect of variable Blank-holder forces (VBHF) on the strain path during sheet metal forming has been investigated by numerical simulation and experiments. The formability of select aluminum alloy sheet was evaluated by theory prediction of forming limit curve based on the M-K method. The effect of different VBHF on the formability was presented. In order to verify the predictions of strain path, experiments are being carried out using a recently-built multi-points variable blank-holder forces hydraulic press. The results show that large side BHF with small comer BHF during rectangular box deep drawing can improve the formability of the selected aluminum alloy sheet

  4. Effect of dysprosium on the kinetics and structural transformations during the decomposition of the supersaturated solid solution in magnesium-samarium alloys

    Science.gov (United States)

    Rokhlin, L. L.; Luk'yanova, E. A.; Tabachkova, N. Yu.; Dobatkina, T. V.; Tarytina, I. E.; Korol'kova, I. G.

    2017-03-01

    The effect of dysprosium added in the amounts such that it does not form an individual phase in equilibrium with solid magnesium on the decomposition of the supersaturated magnesium solid solution in Mg-Sm alloys is studied. The presence of dysprosium in Mg-Sm alloys is found to retard the decomposition of the supersaturated magnesium solid solution and to increase the hardening effect upon aging. When these alloys are aged, dysprosium is partly retained in the magnesium solid solution and partly enters into the compositions of the phases that form during the decomposition of the solid solution and are characteristic of Mg-Sm alloys.

  5. ELECTROLESS NICKEL PLATING OF MAGNESIUM ALLOY WITH MICROARC OXIDATION PRETREATMENT%镁合金微弧氧化预处理化学镀镍研究

    Institute of Scientific and Technical Information of China (English)

    李均明; 薛晓楠; 王爱娟; 马安博; 符致昭

    2012-01-01

    Magnesium alloys after microarc oxidation(MAO) pretreatment were directly electroless Ni plated by using NiSO_4 solution,meanwhile,any traditional pretreatment,including alkaline washing,acid washing and activation,etc.,was used.The microstructure and composition of nickel layer were characterized.The effect of MAO pretreatment on the thickness,hardness,electrical conductivity and corrosion resistance of nickel layer were investigated.The results indicate that the layer which contains Ni and P is composed of cellular particles. MAO pretreatmely affects the thickness and electrical conductivity of nickel layer significantly.The thickness of nickel layer fastly increases but the sheet resistance of the layer rapidly decreases when the thickness of MAO film increases from 3 to 7μm.Furthermore,the results of polarization curve test reveal that when the thickness of MAO film is 15μm,the corrosion potential of the obtained electroless nickel plated magnesium alloy is the highest,and the corrosion current is the lowest.The results of 48 h salt spray test show that the corrosion resistance of electroless nickel plated magnesium alloy with MAO pretreatment is much higher than that of electroless nickel plated magnesium alloy with traditional pretreatment and magnesium alloy substrate.%镁合金微弧氧化(MAO)预处理后,无需碱洗酸洗活化等传统预处理直接在硫酸镍溶液中化学镀镍。表征了镀镍层的显微结构与成分,研究了MAO预处理对镀层厚度、硬度、导电性及耐蚀性的影响。结果表明:含有Ni,P两种元素的镀层由均匀分布的胞状颗粒组成。MAO预处理显著影响镀层的厚度与导电性;当MAO薄膜从3μm增厚至7μm时,镀层的厚度快速增大而方块电阻迅速下降。极化曲线测试表明,当MAO薄膜厚15μm时化学镀镍镁合金的腐蚀电位最高,腐蚀电流最小。48h盐雾实验表明,MAO预处理化学镀镍镁合金的耐蚀性显著优于传统预处理化学镀镍镁合金。

  6. Wrinkle Behavior of Hydroforming of Aluminum Alloy Double-Layer Sheets

    Science.gov (United States)

    Zhou, Bin-Jun; Xu, Yong-Chao

    2016-07-01

    In this article, the wrinkling behavior and thickness distribution of 5A06 aluminum alloy sheets in an annealed state with thickness of 1.0 mm and 2.5 mm was numerically and experimentally investigated under different hydraulic pressures in the hydroforming of single-layer and double-layer sheets. Note that, in double-layer sheets hydroforming, an upper-aided sheet is needed. The upper, thicker sheet synchronously deforms with the lower, thinner sheet during hydroforming. When the double-layer sheets are separated, a thinner curved sheet part will be manufactured. As can be seen from the simulation and experimental results, the upper, thicker sheet could effectively suppress the wrinkles of the lower, thinner sheet and improve the thickness distribution due to the increasing anti-wrinkle ability of the formed sheet and the interfacial friction between the double-layer sheets. In addition, the maximum hydraulic pressure can be decreased via hydroforming of double-layer sheets; this approach reduces the drawing force for large sheet parts and meets the requirement of energy conservation.

  7. Poly(L-lactic acid)/hydroxyapatite/collagen composite coatings on AZ31 magnesium alloy for biomedical application.

    Science.gov (United States)

    Wang, Zhen-Lin; Yan, Yu-Hua; Wan, Tao; Yang, Hui

    2013-10-01

    Surface modification of biomedical magnesium alloy using composite coating shows an attemptable approach for the development of Mg-based biomaterials with excellent cytocompatibility. Hydroxyapatite/collagen composite was preliminarily fabricated by biomineralization, the bioactive poly(l-lactic acid)/hydroxyapatite/collagen composite coatings were spin coated on AZ31 magnesium alloy using poly(l-lactic acid) solution mixed with hydroxyapatite/collagen particles, and the resultant materials and coatings were characterized in structure and related properties; furthermore, the in vitro degradation behavior of modified magnesium alloy in 1.5-fold Hank's solution was investigated. The results show that hydroxyapatite/collagen composite achieved chemical bonding between hydroxyapatite and collagen similar to natural bone; composite coatings on AZ31 magnesium alloy retained the bioactive functional groups of the componential materials and improved the corrosion resistance of Mg alloy; the mass fraction of hydroxyapatite/collagen particles incorporated into the composite affected the porous structure, interfacial adhesion and thus the corrosion resistance of the composite coating due to phase separation as well as volume concentration effects of polymer solution. Composite coatings suppressed the sharp rising of pH value and the released Mg(2+) from substrate to extensive degree, and the degradation behavior of the modified magnesium alloy was supposed to be correlated to microstructure of the coating as well as the synergistic reactions among alkaline- and acidic-degraded products.

  8. Effect of Ar bubbling during plasma electrolytic oxidation of AZ31B magnesium alloy in silicate electrolyte

    Science.gov (United States)

    Lee, Junghoon; Kim, Yonghwan; Chung, Wonsub

    2012-10-01

    Argon gas was bubbled during plasma electrolytic oxidation (PEO) treatment of magnesium alloy in a silicate solution. The appearance of arcs and plasma discharging was locally concentrated on the magnesium alloy surface and phase fraction of Mg2SiO4 in the oxide layer was increased due to Argon gas bubbling. The higher energy density of the Ar plasma atmosphere is believed to contribute to the effective formation of the high temperature phase (Mg2SiO4), particularly in the inner layer. Furthermore, the PEO treated Mg alloy with Ar bubbling showed improved corrosion resistance by a change of open pores structure.

  9. In vivo corrosion behaviour of magnesium alloy in association with surrounding tissue response in rats.

    Science.gov (United States)

    Miura, Chieko; Shimizu, Yoshinaka; Imai, Yoshimichi; Mukai, Toshiji; Yamamoto, Akiko; Sano, Yuya; Ikeo, Naoko; Isozaki, Shuji; Takahashi, Toru; Oikawa, Miho; Kumamoto, Hiroyuki; Tachi, Masahiro

    2016-03-07

    Biodegradable magnesium (Mg) alloys are the most promising candidates for osteosynthesis devices. However, their in vivo corrosion behaviour has not been fully elucidated. The aim of this study was to clarify the influence of the physiological environment surrounding Mg alloys on their corrosion behaviour. A Mg-1.0Al alloy with a fine-grained structure was formed into plates using titanium (Ti) as a control. These plates were implanted into the subperiosteum in the head, subcutaneous tissue of the back, and in the muscle of the femur of rats for 1, 2 and 4 weeks. The volumes of the remaining Mg alloy and of the insoluble salt deposition and gas cavities around the Mg alloy were determined by microtomography, and the volume losses were calculated. Then, the tissue response around the plates in each implantation site was examined histopathologically, and its relation to the respective volume loss was analyzed. These analyses determined that the Mg alloy was corroded fastest in the head, at an intermediate level in the back, and slowest in the femur. The insoluble salt deposition at the Mg alloy surface had no influence on the volume loss. Gas cavities formed around the Mg alloy at all implantation sites and decreased after 4 weeks. Histopathological examination revealed that the Mg alloy exhibited good biocompatibility, as was seen with Ti. In addition, vascularized fibrous capsules formed around the plates and became mature with time. Notably, the volume loss in the different anatomical locations correlated with capsule thickness. Together, our results suggest that, to facilitate the successful clinical application of Mg alloys, it will be necessary to further comprehend their interactions with specific in vivo environments.

  10. Influence of deformation on precipitation in AZ80 magnesium alloy

    Science.gov (United States)

    Yang, Ping; Wang, Li-Na; Xie, Qing-Ge; Li, Ji-Zhong; Ding, Hua; Lu, Lin-Lin

    2011-06-01

    Precipitates in the conventionally processed (solution treatment followed by aging) AZ80 alloy are coarse, cellular, and incoherent. They nucleate and grow on the basal planes of the matrix or distribute discontinuously in the alloy. Their unique morphology and undesired distribution make them ineffective for precipitation strengthening. This condition, however, can be modified by applying selected deformation and heat treatment conditions. The effect of deformation and heat treatment on the morphology and distribution of precipitates has been studied. Deformation was introduced by hot extrusion, cold rolling, or equal channel angular pressing (ECAP). The microstructures were characterized using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results showed that cold deformation improved precipitation more significantly than hot deformation, and twinning promoted precipitation more effectively than slip. When ECAP was applied, the Bc-route induced more precipitates than the A-route.

  11. Modification of Magnesium Alloys by Ceramic Particles in Gravity Die Casting

    Directory of Open Access Journals (Sweden)

    Urs Haßlinger

    2014-01-01

    Full Text Available A critical drawback for the application of magnesium wrought alloys is the limited formability of semifinished products that arises from a strong texture formation during thermomechanical treatment. The ability of second phase particles embedded into the metal matrix to alter this texture evolution is of great interest. Therefore, the fabrication of particle modified magnesium alloys (particle content 0.5–1 wt.-% by gravity die casting has been studied. Five different types of micron sized ceramic powders (AlN, MgB2, MgO, SiC, and ZrB2 have been investigated to identify applicable particles for the modification. Agglomeration of the particles is revealed to be the central problem for the fabrication process. The main factors that influence the agglomerate size are the particle size and the intensity of melt stirring. Concerning handling, chemical stability in the Mg-Al-Zn alloy system, settling and wetting in the melt, and formation of the microstructure in most cases, the investigated powders show satisfying properties. However, SiC is chemically unstable in aluminum containing alloys. The high density of ZrB2 causes large particles to settle subsequent to stirring resulting in an inhomogeneous distribution of the particles over the cast billet.

  12. Corrosion behavior of WE54 magnesium alloy in 3.5%NaCl solution

    Institute of Scientific and Technical Information of China (English)

    LI Zhuo-qun; SHAN Da-yong; CHEN Rong-shi; KE Wei; HAN En-hou

    2006-01-01

    The corrosion behavior of WE54 magnesium alloy was investigated in 3.5%NaCl aqueous solution. The electrochemical study shows that the value of corrosion potential of WE54 magnesium was -1.8V(vs SCE). In the initial stage of immersion, a kind of visible thin film, which has the appearance of artificial conversion coating by microscopy observation, formed on the surface of WE54 alloy. Through the comparison of corrosion behavior between WE54 and AZ91D, it is shown that the value of corrosion potential of WE54 is approximately 200 mV lower than that of AZ91D, and the corrosion rate of WE54 was one order smaller than that of AZ91D. After 72 h constant immersion and corrosion products removal, deeper grooves along grain boundaries was revealed but lighter corrosion was apparent on the matrix of WE54 alloy. As far as AZ91D alloy was concerned, severe localized corrosion was dominant and network-bone-like structure was remained.

  13. Calcium phosphate coating on magnesium alloy for modification of degradation behavior

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Magnesium alloy has similar mechanical properties with natural bone,but its high susceptibility to corrosion has limited its application in orthopedics.In this study,a calcium phosphate coating is formed on magnesium alloy (AZ31) to control its degradation rate and enhance its bioactivity and bone inductivity.Samples of AZ31 plate were placed in the supersaturated calcification solution prepared with Ca(NO3)2,NaH2PO4 and NaHCO3,then the calcium phosphate coating formed.Through adjusting the immersion time,the thickness of uniform coatings can be changed from 10 to 20 μm.The composition,phase structure and morphology of the coatings were investigated.Bonding strength of the coatings and substrate was 2-4 MPa in this study.The coatings significantly decrease degradation rate of the original Mg alloy,indicating that the Mg alloy with calcium phosphate coating is a promising degradable bone material.

  14. Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments

    Science.gov (United States)

    Rojaee, Ramin; Fathi, Mohammadhossein; Raeissi, Keyvan

    2013-11-01

    Bio-absorbable magnesium (Mg) based alloys have been introduced as innovative orthopedic implants during recent years. It has been specified that rapid degradation of Mg based alloys in physiological environment should be restrained in order to be utilized in orthopedic trauma fixation and vascular intervention. In this developing field of healthcare materials, micro-arc oxidation (MAO), and MgF2 conversion coating were exploited as surface pre-treatment of AZ91 magnesium alloy to generate a nanostructured hydroxyapatite (n-HAp) coating via electrophoretic deposition (EPD) method. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM) techniques were used to characterize the obtained powder and coatings. The potentiodynamic polarization tests were carried out to evaluate the corrosion behavior of the coated and uncoated specimens, and in vitro bioactivity evaluation were performed in simulated body fluid. Results revealed that the MAO/n-HAp coated AZ91 Mg alloy samples with a rough topography and lower corrosion current density leads to a lower Mg degradation rate accompanied by high bioactivity.

  15. Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments

    Energy Technology Data Exchange (ETDEWEB)

    Rojaee, Ramin, E-mail: raminrojaee@aim.com [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84156-83111 (Iran, Islamic Republic of); Fathi, Mohammadhossein [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84156-83111 (Iran, Islamic Republic of); Dental Materials Research Center, Isfahan University of Medical Sciences, Isfahan (Iran, Islamic Republic of); Raeissi, Keyvan [Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84156-83111 (Iran, Islamic Republic of)

    2013-11-15

    Bio-absorbable magnesium (Mg) based alloys have been introduced as innovative orthopedic implants during recent years. It has been specified that rapid degradation of Mg based alloys in physiological environment should be restrained in order to be utilized in orthopedic trauma fixation and vascular intervention. In this developing field of healthcare materials, micro-arc oxidation (MAO), and MgF{sub 2} conversion coating were exploited as surface pre-treatment of AZ91 magnesium alloy to generate a nanostructured hydroxyapatite (n-HAp) coating via electrophoretic deposition (EPD) method. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM) techniques were used to characterize the obtained powder and coatings. The potentiodynamic polarization tests were carried out to evaluate the corrosion behavior of the coated and uncoated specimens, and in vitro bioactivity evaluation were performed in simulated body fluid. Results revealed that the MAO/n-HAp coated AZ91 Mg alloy samples with a rough topography and lower corrosion current density leads to a lower Mg degradation rate accompanied by high bioactivity.

  16. Thermodynamic and kinetic destabilization of magnesium hydride using Mg-In solid solution alloys.

    Science.gov (United States)

    Zhou, Chengshang; Fang, Zhigang Zak; Lu, Jun; Zhang, Xiaoyi

    2013-07-31

    Efforts to thermodynamically destabilize magnesium hydride (MgH2), so that it can be used for practical hydrogen storage applications, have been a difficult challenge that has eluded scientists for decades. This letter reports that MgH2 can indeed be destabilized by forming solid solution alloys of magnesium with group III and IVB elements, such as indium. Results of this research showed that the equilibrium hydrogen pressure of a Mg-0.1In alloy is 70% higher than that of pure MgH2. The temperature at 1 bar hydrogen pressure (T1bar) of Mg-0.1In alloy was reduced to 262.9 °C from 278.9 °C, which is the T1bar of pure MgH2. Furthermore, the kinetic rates of dehydrogenation of Mg-0.1In alloy hydride doped with a titanium intermetallic (TiMn2) catalyst were also significantly improved compared with those of MgH2.

  17. Biocompatibility and neurotoxicity of magnesium alloys potentially used for neural repairs.

    Science.gov (United States)

    Fei, Jianjun; Wen, Xiaoxiao; Lin, Xiao; Saijilafu; Wang, Weihua; Ren, Olga; Chen, Xinjian; Tan, Lili; Yang, Ke; Yang, Huilin; Yang, Lei

    2017-09-01

    Nerve injury, especially the large-size nerve damage, is a serious problem affecting millions of people. Entubulation of two ends of the injured nerve by using an implantable device, e.g., nerve guidance conduit (NGC), to guide the regeneration of nerve tissue is a promising approach for treating the large-size nerve defect. Magnesium (Mg) and its alloys are biodegradable, conductive, and own good mechanical properties. Mg(2+) ion, one of the main degradation products of Mg and its alloys, was reported to promote the proliferation of neural stem cells and their neurite production. Thus, Mg and its alloys are potential materials for fabricating the nerve repair implants, such as NGC or scaffold. However, the compatibility of Mg alloys to cells, especially neurons is not clear. In this work, NZ20 (Mg-2Nd-Zn), ZN20 (Mg-2Zn-Nd) and Mg-10Li magnesium alloys were selected for study, due to the improved mechanical properties of NZ20 and ZN20 alloys and bio-function of Li(+) ions from Mg-10Li to nervous system, respectively. The degradation behavior and biocompatibility were studied by in vitro degradation test and cell adhesion assay, respectively. Specifically, the cytocompatibility to dorsal root ganglion (DRG) neurons, RF/6A choroid-retina endothelial cells, and osteoblasts in the cell culture media containing Mg alloy extracts were investigated. The results showed that Mg alloys degraded at different rates in cell culture media and artificial cerebrospinal fluid. The three alloy extracts showed negligible toxic effects on the endothelial cells and osteoblasts at short term (1 day), while NZ20 extract inhibited the proliferation of these two types of cells. The effect of Mg alloy extracts on cell proliferation was also concentration-dependent. For DRG neurons, ZN20 and Mg-10Li alloy extracts showed no neural toxicity compared with control group. The results of the present work show a potential and feasibility of Mg-10Li and ZN20 for nerve repair applications. Copyright

  18. A FLOW STRESS MODEL FOR AZ61 MAGNESIUM ALLOY

    Institute of Scientific and Technical Information of China (English)

    H.T.Zhou; X.Q.Zeng; Q.D Wang; W.J.Ding

    2004-01-01

    The flow stress behaviors of AZ61 alloy has been investigated at temperature range from 523 to 673K with the strain rates of 0.001-1s-1.It is found that the average activation energy,strain rate sensitive exponent and stress exponent are different at various deformation conditions changing from 1i3.6 to 176.3k J/mol,0.125 to 0.167 and 6 to 8 respectively.A flow stress model for AZ61 alloy is derived by analyzing the stress data based on hot compression test.It is demonstrated that the flow stress model including strain hardening exponent and strain softening exponent is suitable to predicate the flow stress.The prediction of the flow stress of AZ61 alloy has shown to be good agreement with the test data.The maximum differences of the peak stresses calculated by the model and obtained by experiment is less than 8%.

  19. Corrosion mechanism of micro-arc oxidation treated biocompatible AZ31 magnesium alloy in simulated body fluid

    OpenAIRE

    Ying Li; Fang Lu; Honglong Li; Wenjun Zhu; Haobo Pan; Guoxin Tan; Yonghua Lao; Chengyun Ning; Guoxin Ni

    2014-01-01

    The rapid degradation of magnesium (Mg) based alloys has prevented their further use in orthopedic trauma fixation and vascular intervention, and therefore it is essential to investigate the corrosion mechanism for improving the corrosion resistance of these alloys. In this work, the effect of applied voltage on the surface morphology and the corrosion behavior of micro-arc oxidation (MAO) with different voltages were carried out to obtain biocompatible ceramic coatings on AZ31 Mg alloy. The ...

  20. Environmental friendly plasma electrolytic oxidation of AM60 magnesium alloy and its corrosion resistance

    Institute of Scientific and Technical Information of China (English)

    CAO Fa-he; LIN Long-yong; ZHANG Zhao; ZHANG Jian-qing; CAO Chu-nan

    2008-01-01

    Plasma electrolytic oxidation of Mg-based AM60 alloys was investigated using 50 Hz AC anodizing technique in an alkaline borate solution, which contained a new kind of organic. The anodic film is relatively smooth with some micro pores and cracks, while the anodic film consists of MgO, MgAl2O4 and MgSiO3. The electrochemical behavior of anodic film was studied by electrochemical impedance spectroscopy and potentiodynamic polarization. Polarization results indicate the PEO treatment can decrease corrosion current by 3-4 magnitude compared with blank AM60 alloy. The anodic film presents a good level of corrosion protection for AM60 magnesium alloy, over 272 h of the salt spray test based on ASTM B117. The effect of micro-structure and composition on corrosion protection efficiency was also investigated.

  1. Effects of heat-treatment on microstructure of wrought magnesium alloy ZK60

    Institute of Scientific and Technical Information of China (English)

    MA Yan-long; PAN Fu-sheng; ZUO Ru-lin; ZHANG Jin; YANG Ming-bo

    2006-01-01

    The microstructure of the as-cast, as-solution-treated and as-aged wrought magnesium alloy ZK60 was studied. The results indicate that the microstructure of the as-cast ZK60 alloy is mainly composed of network eutectic (α-Mg+MgZn) and divorced eutectic MgZn, which semi-continuously distribute along the grain boundaries or in the interdendritic area and almost dissolve into the matrix after solid solution treatment. The Laves phase MgZn2 is not sensitive to the heat treatment and seems to form at the early stage of solidification and keeps its size and shape till the aging stage. It is believed that the occurrence of the Laves phase in the ZK60 alloy would possibly contribute to the defects. Many new phases, including MgZn phase which is different from that forms during eutectic reaction, precipitate after aging treatment.

  2. Understanding effects of microstructural inhomogeneity on creep response – New approaches to improve the creep resistance in magnesium alloys

    Directory of Open Access Journals (Sweden)

    Yuanding Huang

    2014-06-01

    Full Text Available Previous investigations indicate that the creep resistance of magnesium alloys is proportional to the stability of precipitated intermetallic phases at grain boundaries. These stable intermetallic phases were considered to be effective to suppress the deformation by grain boundary sliding, leading to the improvement of creep properties. Based on this point, adding the alloying elements to form the stable intermetallics with high melting point became a popular way to develop the new creep resistant magnesium alloys. The present investigation, however, shows that the creep properties of binary Mg–Sn alloy are still poor even though the addition of Sn possibly results in the precipitation of thermal stable Mg2Sn at grain boundaries. That means other possible mechanisms function to affect the creep response. It is finally found that the poor creep resistance is attributed to the segregation of Sn at dendritic and grain boundaries. Based on this observation, new approaches to improve the creep resistance are suggested for magnesium alloys because most currently magnesium alloys have the commonality with the Mg–Sn alloys.

  3. Grain refinement of AZ31 magnesium alloy by Al-Ti-C-Y master alloy

    Institute of Scientific and Technical Information of China (English)

    XU Chunxiang; LU Binfeng; L(U) Zhengling; LIANG Wei

    2008-01-01

    Al-Ti-C-Y master alloy was prepared by combining SHS technique and melting-casting method. The microstructure of master alloy and its grain-refining effect on AZ31 alloy were investigated by means of OM, XRD, SEM and EDS. Experimental results indicated that the prepared master alloy consisted of α-Al, TiAl3, TiC and Al3Y phases, and exhibited good grain-refining performance of AZ31 alloy. Morphology of α-Mg changed from coarse dendritic to fine equiaxed and the average grain size of α-Mg matrix reduced from the original 580 to 170 μm after adding 1.0 wt.% master alloy. The grain refining efficiency of Al-Ti-C-Y master alloy on AZ31 alloy was mainly attributed to heterogeneous nucleation of TiC particles and grain growth restriction of Al-Y compound or TiC at grain boundaries.

  4. Magnesium alloys and graphite wastes encapsulated in cementitious materials: Reduction of galvanic corrosion using alkali hydroxide activated blast furnace slag

    Energy Technology Data Exchange (ETDEWEB)

    Chartier, D., E-mail: david.chartier@cea.fr [Commissariat à l' Energie Atomique et aux Energies Alternatives, CEA, DEN, DTCD, SPDE, F-30207 Bagnols-sur-Cèze (France); Muzeau, B. [DEN-Service d’Etude du Comportement des Radionucléides (SECR), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette (France); Stefan, L. [AREVA NC/D& S - France/Technical Department, 1 place Jean Millier 92084 Paris La Défense (France); Sanchez-Canet, J. [Commissariat à l' Energie Atomique et aux Energies Alternatives, CEA, DEN, DTCD, SPDE, F-30207 Bagnols-sur-Cèze (France); Monguillon, C. [DEN-Service d’Etude du Comportement des Radionucléides (SECR), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette (France)

    2017-03-15

    Highlights: • Embedded in cement, magnesium is corroded by residual water present in porosity of the matrix. • Corrosion is enhanced by galvanic phenomenon when magnesium is in contact with graphite. • Galvanic corrosion of magnesium in contact with graphite debris is shown to be severe with ordinary Portland cement. • Galvanic corrosion is significantly lowered in high alkali medium such as sodium hydroxide. • Sodium hydroxide activated blast furnace slag is a convenient binder to embed magnesium. - Abstract: Magnesium alloys and graphite from spent nuclear fuel have been stored together in La Hague plant. The packaging of these wastes is under consideration. These wastes could be mixed in a grout composed of industrially available cement (Portland, calcium aluminate…). Within the alkaline pore solution of these matrixes, magnesium alloys are imperfectly protected by a layer of Brucite resulting in a slow corrosion releasing hydrogen. As the production of this gas must be considered for the storage safety, and the quality of wasteform, it is important to select a cement matrix capable of lowering the corrosion kinetics. Many types of calcium based cements have been tested and most of them have caused strong hydrogen production when magnesium alloys and graphite are conditioned together because of galvanic corrosion. Exceptions are binders based on alkali hydroxide activated ground granulated blast furnace slag (BFS) which are presented in this article.

  5. Modelling of laser cladding of magnesium alloys with pre-placed powders

    Science.gov (United States)

    Guo, Li-Feng

    As a surface engineering technique, high-power laser cladding, has shown great potential for improving the corrosion resistance of magnesium alloys. Its main advantage over other processes, is its ability to form relatively thick protective coatings on selected areas where improved properties are desired. It is also a 'clean' process. However, previous research studies have found that in laser cladding of magnesium alloys, the problem of a high degree of dilution cannot be easily overcome. Moreover, in-depth studies using analytical or numerical modelling can rarely be found in the literature for addressing laser cladding with pre-placed powders with the aim of predicting the level of dilution. In the first phase of this study, a simplified thermal model based on the finite element method (FEM) was developed to study the phenomenon of dilution in laser cladding of a magnesium alloy. In the model, the powder bed was treated as a continuum, and a high power continuous wave (CW) laser was employed. The results of the simulations of the FEM model together with those of the statistical analyses showed that although, under normal cladding conditions, a process window can be established for achieving good interfacial bonding between the substrate and the clad coating, a low dilution level was extremely difficult to achieve. This was primarily attributed to the low melting point and the high thermal diffusivity of magnesium as well as the relatively long laser-material interaction time. To overcome the dilution problem, the double-layer cladding technique was explored, and was found to be able to produce low dilution clads with improved corrosion resistance. In considering the improvement of corrosion resistance that can be caused by laser surface modification to magnesium alloys, a comparison was made between the techniques of laser surface melting and laser cladding. The results of the potentiodynamic polarisation tests showed that the improvement obtained from laser

  6. One-step electrodeposition process to fabricate corrosion-resistant superhydrophobic surface on magnesium alloy.

    Science.gov (United States)

    Liu, Qin; Chen, Dexin; Kang, Zhixin

    2015-01-28

    A simple, one-step method has been developed to construct a superhydrophobic surface by electrodepositing Mg-Mn-Ce magnesium plate in an ethanol solution containing cerium nitrate hexahydrate and myristic acid. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were employed to characterize the surfaces. The shortest electrodeposition time to obtain a superhydrophobic surface was about 1 min, and the as-prepared superhydrophobic surfaces had a maximum contact angle of 159.8° and a sliding angle of less than 2°. Potentiodynamic polarization and electrochemical impedance spectroscopy measurements demonstrated that the superhydrophobic surface greatly improved the corrosion properties of magnesium alloy in 3.5 wt % aqueous solutions of NaCl, Na2SO4, NaClO3, and NaNO3. Besides, the chemical stability and mechanical durability of the as-prepared superhydrophobic surface were also examined. The presented method is rapid, low-cost, and environmentally friendly and thus should be of significant value for the industrial fabrication of anticorrosive superhydrophobic surfaces and should have a promising future in expanding the applications of magnesium alloys.

  7. Elastic Properties and Internal Friction of Two Magnesium Alloys at Elevated Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Freels, M.; Liaw, P. K.; Garlea, E.; Morrell, J. S.; Radiovic, M.

    2011-06-01

    The elastic properties and internal friction of two magnesium alloys were studied from 25 C to 450 C using Resonant Ultrasound Spectroscopy (RUS). The Young's moduli decrease with increasing temperature. At 200 C, a change in the temperature dependence of the elastic constants is observed. The internal friction increases significantly with increasing temperature above 200 C. The observed changes in the temperature dependence of the elastic constants and the internal friction are the result of anelastic relaxation by grain boundary sliding at elevated temperatures. Elastic properties govern the behavior of a materials subjected to stress over a region of strain where the material behaves elastically. The elastic properties, including the Young's modulus (E), shear modulus (G), bulk modulus (B), and Poisson's ratio (?), are of significant interest to many design and engineering applications. The choice of the most appropriate material for a particular application at elevated temperatures therefore requires knowledge of its elastic properties as a function of temperature. In addition, mechanical vibration can cause significant damage in the automotive, aerospace, and architectural industries and thus, the ability of a material to dissipate elastic strain energy in materials, known as damping or internal friction, is also important property. Internal friction can be the result of a wide range of physical mechanisms, and depends on the material, temperature, and frequency of the loading. When utilized effectively in engineering applications, the damping capacity of a material can remove undesirable noise and vibration as heat to the surroundings. The elastic properties of materials can be determined by static or dynamic methods. Resonant Ultrasound Spectroscopy (RUS), used in this study, is a unique and sophisticated non-destructive dynamic technique for determining the complete elastic tensor of a solid by measuring the resonant spectrum of mechanical resonance for a

  8. Microstructural development of high temperature deformed AZ31 magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Shahbeigi Roodposhti, Peiman, E-mail: pshahbe@ncsu.edu; Sarkar, Apu; Murty, Korukonda Linga

    2015-02-25

    Due to their significant role in automobile industries, high temperature deformation of Mg–Al–Zn alloys (AZ31) at constant stress (i.e. creep) were studied at a wide range of stresses and temperatures to characterize underlying deformation mechanism, dynamic recrystallization (DRX) and dislocation density evolution. Various microstructures (e.g. grain growth & DRX) are noted during steady-state creep mechanisms such as grain boundary sliding (GBS), dislocation glide creep (DGC) and dislocation climb creep (DCC). Although a combination of DRX and grain growth is characteristic of low stacking fault energy materials like Mg alloys at elevated temperatures, observation reveals grain growth at low strain-rates (GBS region) along with dynamic recovery (DRV) mechanism. X-Ray Diffraction (XRD) analysis revealed a decrease in dislocation density during GBS region while it increased under dislocation based creep mechanisms which could be related to the possible DRV and DRX respectively. Scanning Electron Microscopic (SEM) characterization of the fracture surface reveals more inter-granular fracture for large grains (i.e. GBS region with DRV process) and more dimple shape fracture for small grains (i.e. DGC & DCC region with DRX)

  9. Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi{sub 2}O{sub 6})

    Energy Technology Data Exchange (ETDEWEB)

    Razavi, Mehdi, E-mail: mehdi.razavi@okstate.edu [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Torabinejad Dental Research Center, School of Dentistry, Isfahan University of Medical Sciences, Isfahan 81746-73461 (Iran, Islamic Republic of); Department of Anatomical Sciences and Molecular Biology, School of Medicine, Isfahan University of Medical Sciences, Isfahan 81746-73461 (Iran, Islamic Republic of); School of Materials Science and Engineering, Helmerich Advanced Technology Research Center, Oklahoma State University, Tulsa, OK 74106 (United States); School of Electrical and Computer Engineering, Helmerich Advanced Technology Research Center, Oklahoma State University, Tulsa, OK 74106 (United States); Fathi, Mohammadhossein [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Dental Materials Research Center, Isfahan University of Medical Sciences, Isfahan (Iran, Islamic Republic of); Savabi, Omid [Torabinejad Dental Research Center, School of Dentistry, Isfahan University of Medical Sciences, Isfahan 81746-73461 (Iran, Islamic Republic of); Beni, Batoul Hashemi [Department of Anatomical Sciences and Molecular Biology, School of Medicine, Isfahan University of Medical Sciences, Isfahan 81746-73461 (Iran, Islamic Republic of); Razavi, Seyed Mohammad [School of Dentistry, Isfahan University of Medical Sciences, Isfahan 81746-73461 (Iran, Islamic Republic of); Vashaee, Daryoosh [School of Electrical and Computer Engineering, Helmerich Advanced Technology Research Center, Oklahoma State University, Tulsa, OK 74106 (United States); and others

    2014-01-01

    Magnesium alloys with their biodegradable characteristic can be a very good candidate to be used in orthopedic implants. However, magnesium alloys may corrode and degrade too fast for applications in the bone healing procedure. In order to enhance the corrosion resistance and the in vitro bioactivity of a magnesium alloy, a nanostructured diopside (CaMgSi{sub 2}O{sub 6}) film was coated on AZ91 magnesium alloy through combined micro-arc oxidation (MAO) and electrophoretic deposition (EPD) methods. The crystalline structures, morphologies and compositions of the coated and uncoated substrates were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy. Polarization, electrochemical impedance spectroscopy, and immersion test in simulated body fluid (SBF) were employed to evaluate the corrosion resistance and the in vitro bioactivity of the samples. The results of our investigation showed that the nanostructured diopside coating deposited on the MAO layer increases the corrosion resistance and improves the in vitro bioactivity of the biodegradable magnesium alloy.

  10. Improvement of warm formability of Al-Mg sheet alloys containing coarse second-phase particles

    Institute of Scientific and Technical Information of China (English)

    Arne; K; DAHLE; Amit; K; GHOSH

    2009-01-01

    Several alloying elements involving Zr, Cu, Zn and Sc were added to Al-Mg sheet alloys in order to obtain an excellent combination of high strength and good high-temperature formability. Microstruc-tural examination showed that coarse intermetallic particles were formed in the microstructure and their amounts changed with variations of the alloying elements. During warm rolling of thermome-chanical treatments prior to warm deformation, the coarse particles initiated cracks, decreasing the warm formability. For healing the crack damage and further improving the warm formability, a process of hot isothermal press was developed and optimized to the sheet alloys. With this process, the biaxial stretch formability at 350℃ was improved by 22% for an aluminum alloy containing a large amount of coarse particles.

  11. Improvement of warm formability of Al-Mg sheet alloys containing coarse second-phase particles

    Institute of Scientific and Technical Information of China (English)

    HanLiang ZHU; Arne K DAHLE; Amit K GHOSH

    2009-01-01

    Several alloying elements involving Zr, Cu, Zn and Sc were added to AI-Mg sheet alloys in order to obtain an excellent combination of high strength and good high-temperature formability. Microstruc-tural examination showed that coarse intermetallic particles were formed in the microstructure and their amounts changed with variations of the alloying elements. During warm rolling of thermome-chanical treatments prior to warm deformation, the coarse particles initiated cracks, decreasing the warm formability. For healing the crack damage and further improving the warm formability, a process of hot isothermal press was developed and optimized to the sheet alloys. With this process, the biaxial stretch formability at 350"(2 was improved by 22% for an aluminum alloy containing a large amount of coarse particles.

  12. Superplasticity and cavitation in an aluminum-magnesium alloy

    Science.gov (United States)

    Bae, Donghyun

    2000-10-01

    Fundamental issues related to the forming performance of superplastic metals include the mechanisms of flow and cavitation occurring during the forming process. Cavitation beyond a critical amount is damaging to the mechanical behavior of fabricated parts. Therefore, the role of process parameters which influence cavitation must be precisely documented and understood. In this study, (1) the mechanism of deformation, (2) cavity formation and growth, and (3) the effect of forming parameters on cavitation are systematically investigated in a fine grain Al-4.7%Mg-0.8%Mn-0.4%Cu alloy. The mechanical flow response of the alloy is characterized by a new type of step strain-rate test which preserves the initial microstructure of the alloy. Under isostructural condition, sigmoidal log s vs. log 3˙ relationship is determined and then analyzed by using a grain-mantle based quantitative model1 for superplastic flow. The activation energies in both grain-mantle creep and core creep are analyzed, and the overall controlling mechanism is found to be dislocation glide and climb. Grain-mantle creep rate in the low strain-rate region is found to be enhanced many times due to a high concentration of vacancies near grain boundaries. Cavitation caused by superplastic straining under uniaxial tension is evaluated by the SEM (for frame associated with superplastic deformation. In the model, faster cavity growth is predicted for lower m and for smaller cavity density when cavity stress fields are not overlapping. Observed cavitation quantitatively agrees with the present model, but diffusional growth is found to be too slow, which cannot explain the observed nanoscale void growth behavior. Another parameter affecting the degree of cavitation is the imposed stress-state. Cavity growth rate as well as cavity nucleation rate increase with the level of mean hydrostatic tension. For a fixed cavitation volume fraction, V, the principal surface strains, 31 and 32 , for the various stress

  13. Optimized H{sup -} extraction in an argon-magnesium seeded magnetized sheet plasma

    Energy Technology Data Exchange (ETDEWEB)

    Noguera, Virginia R. [Plasma Physics Laboratory, National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101 (Philippines)], E-mail: virginia.noguera@gmail.com; Blantocas, Gene Q. [Plasma Physics Laboratory, National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101 (Philippines); West Visayas State University, Lapaz, Iloilo City 5000 (Philippines); Ramos, Henry J. [Plasma Physics Laboratory, National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101 (Philippines)

    2008-06-15

    The enhancement and optimization of H{sup -} extraction through argon and magnesium seeding of hydrogen discharges in a magnetized sheet plasma source are reported. The paper first presents the modification of the production chamber into a hexapole multicusp configuration resulting in decreased power requirements, improved plasma confinement and longer filament lifetime. By this, a wider choice of discharge currents for sustained quiescent plasmas is made possible. Second, the method of adding argon to the hydrogen plasma similar to the scheme in Abate and Ramos [Y. Abate, H. Ramos, Rev. Sci. Instr. 71 (10) (2000) 3689] was performed to find the optimum conditions for H{sup -} formation and extraction. Using an E x B probe, H{sup -} yields were investigated at varied argon-hydrogen admixtures, different discharge currents and spatial points relative to the core plasma. The optimum H{sup -} current density extracted at 3.0 cm from the plasma core using 3.0 A plasma current with 10% argon seeding increased by a factor of 2.42 (0.63 A/m{sup 2}) compared to the measurement of Abate and Ramos [Y. Abate, H. Ramos, Rev. Sci. Instr. 71 (10) (2000) 3689]. Third, the argon-hydrogen plasma at the extraction chamber is seeded with magnesium. Mg disk with an effective area of 22 cm{sup 2} is placed at the extraction region's anode biased 175 V with respect to the cathode. With Mg seeding, the optimum H{sup -} current density at the same site and discharge conditions increased by 4.9 times (3.09 A/m{sup 2}). The enhancement effects were analyzed vis-a-vis information gathered from the usual Langmuir probe (electron temperature and density), electron energy distribution function (EEDF) and the ensuing dissociative attachment (DA) reaction rates at different spatial points for various plasma discharges and gas ratios. Investigations on the changes in the effective electron temperature and electron density indicate that the enhancement is due to increased density of low

  14. Cerium-based conversion coatings on magnesium alloys

    Science.gov (United States)

    Castano Londono, Carlos Eduardo

    This research is primarily focused on gaining a better understanding of the deposition and corrosion behavior of cerium-based conversion coatings (CeCCs) on AZ31B and AZ91D Mg alloys. Deposition of homogenous and protective CeCCs was highly dependent on the surface preparation steps. The best results were obtained when Mg samples underwent grinding, acid cleaning, and alkaline cleaning processes. This reduced the number of active cathodic sites and promoted the formation of a protective Al-rich Mg oxide/hydroxide layer. Electrochemical properties of the CeCCs were also strongly correlated with morphological, microstructural, and chemical characteristics. Protective CeCCs were deposited on both AZ31 and AZ91 Mg alloys using a range of deposition times (5 to 180 s) and temperatures (10 to 80 °C). However, shorter deposition times (5 s) and lower deposition temperatures (~10 °C) showed higher impedance and longer bath stability than other deposition conditions. The increase in impedance was related with fewer cracks and smaller nodule sizes. Additional investigations of post-treated CeCCs exposed to NaCl environments showed an increased in the total impedance. The increase in corrosion protection of the CeCCs was associated with an overall increase in coating thickness from 400 to 800 nm. A microstructural evolution from ~3 nm nodular nanocrystals of CeO2/CePO4*H2O embedded in an amorphous matrix to >50 nm CePO4*H2O nanocrystals was responsible for the electrochemically active corrosion protection. Exposure of CeCCs to sunlight in humid environments promoted the reduction of Ce(IV) into Ce(III) species compared to unexposed coatings. This reduction process was related with photocatalytic water oxidation reaction.

  15. Corner forming of AZ61A magnesium alloy tube within warm hydroforming

    Institute of Scientific and Technical Information of China (English)

    HU Lan; HAN Cong; HE Zhu-bin; TANG Ze-jun; LIU Gang; YUAN Shi-jian

    2009-01-01

    The corners with small radii on cross sections are crucial for forming hydroformed components with polygonal sections. In this paper, warm hydroforming experiments of AZ61 A magnesium alloy tubes were carried out to study the forming regularity of round corners by using a demonstration part with square sections.Effects of temperature on radius forming, thinning ratio distribution and microstructure were revealed and a component with relative outer corner radius of 3.0 was obtained by warm hydroforming at 240℃. The minimum thickness of the formed square section was located in the transition position between the corner and the straight wall. The thinning ratio of the round corner increased with the increase of forming temperature. Formability of the magnesium tube was improved by raising temperature under the effect of dynamic recrystallization at 240℃.

  16. Structure and in vitro bioactivity of ceramic coatings on magnesium alloys by microarc oxidation

    Science.gov (United States)

    Yu, Huijun; Dong, Qing; Dou, Jinhe; Pan, Yaokun; Chen, Chuanzhong

    2016-12-01

    Magnesium and its alloys have the potential to serve as lightweight, degradable, biocompatible and bioactive orthopedic implants for load-bearing applications. However, severe local corrosion attack and high corrosion rate have prevented their further clinical use. Micro-arc oxidation (MAO) is proved to be a simple, controllable and efficient electrochemistry technique that can prepare protective ceramic coatings on magnesium alloys. In this paper, electrolyte containing silicate salts was used for microarc oxidation to form ceramic bioactive coatings on the ZK61 alloy substrate. The structure characteristics and element distributions of the coating were investigated by XRD, TEM, SEM and EPMA. The MAO samples were immersed in simulated body fluid (SBF) for 7 and 14 days, respectively. The surface characteristic of the immersed coatings was investigated by Fourier-transform infrared (FTIR) spectroscopy. The results show that these MAO coatings have low crystallinity and are mainly composed of MgO, Mg2SiO4 and Mg2Si2O6. The coating surface is porous. During the SBF immersion period, the nucleation and precipitation of bone-like apatites occur on the MAO coating surface. The corrosion resistance of the substrate is improved by the MAO coatings.

  17. Bioresorbable Drug-Eluting Magnesium-Alloy Scaffold for Treatment of Coronary Artery Disease

    Directory of Open Access Journals (Sweden)

    Carlos M. Campos

    2013-12-01

    Full Text Available The introduction of metallic drug-eluting stents has reduced the risk of restenosis and widened the indications of percutaneous coronary intervention in treatment of coronary artery disease. However, this medical device can induce hypersensitive reaction that interferes with the endothelialization and healing process resulting in late persistent or acquired malapposition of the permanent metallic implant. Delayed endotheliaization and malapposition may lead to late and very late stent thrombosis. Bioresorbable scaffolds (BRS have been introduced to potentially overcome these limitations, as they provide temporary scaffolding and then disappear, liberating the treated vessel from its cage. Magnesium is an essential mineral needed for a variety of physiological functions in the human body and its bioresorbable alloy has the strength-to-weight ratio comparable with that of strong aluminum alloys and alloy steels. The aim of this review is to present the new developments in Magnesium BRS technology, to describe its clinical application and to discuss the future prospects of this innovative therapy.

  18. Corrosion product layers on magnesium alloys AZ31 and AZ61: Surface chemistry and protective ability

    Energy Technology Data Exchange (ETDEWEB)

    Feliu, S., E-mail: sfeliu@cenim.csic.es; Llorente, I.

    2015-08-30

    Highlights: • Surface chemistry of the corrosion product layers on magnesium alloys. • Influence of the type of alloy on the carbonate surface enrichment. • Relation between surface composition and protection properties. - Abstract: This paper studies the chemical composition of the corrosion product layers formed on magnesium alloys AZ31 and AZ61 following immersion in 0.6 M NaCl, with a view to better understanding their protective action. Relative differences in the chemical nature of the layers were quantified by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDX) and low-angle X-ray diffraction (XRD). Corrosion behavior was investigated by Electrochemical Impedance Spectroscopy (EIS) and hydrogen evolution measurement. An inhibitive effect from the corrosion product layers was observed from EIS, principally in the case of AZ31, as confirmed by hydrogen evolution tests. A link was found between carbonate enrichment observed by XPS in the surface of the corrosion product layer, concomitant with the increase in the protective properties observed by EIS.

  19. A cellular automaton model for microstructural simulation of friction stir welded AZ91 magnesium alloy

    Science.gov (United States)

    Akbari, Mostafa; Asadi, Parviz; Besharati Givi, MohammadKazem; Zolghadr, Parisa

    2016-03-01

    To predict the grain size and microstructure evolution during friction stir welding (FSW) of AZ91 magnesium alloy, a finite element model (FEM) is developed based on the combination of a cellular automaton model and the Kocks  -  Mecking and Laasraoui-Jonas models. First, according to the flow stress curves and using the Kocks  -  Mecking model, the hardening and recovery parameters and the strain rate sensitivity were calculated. Next, an FEM model was established in Deform-3D software to simulate the FSW of AZ91 magnesium alloy. The results of the FEM model are used in microstructure evolution models to predict the grain size and microstructure of the weld zone. There is a good agreement between the simulated and experimental microstructures, and the proposed model can simulate the dynamic recrystallization (DRX) process during FSW of AZ91 alloy. Moreover, microstructural properties of different points in the SZ as well as the effect of the w/v parameter on the grain size and microstructure are considered.

  20. Galvanic corrosion behavior of die cast AZ91D magnesium alloy in chloride solution

    Institute of Scientific and Technical Information of China (English)

    Zhensong Tong; Wei Zhang; Jiuqing Li; Jin Gao; Jiquan He; Ji Zhou

    2004-01-01

    The galvanic corrosion behavior of die cast AZ91D magnesium alloy coupled with H62 brass, 316L stainless steel, A3steel and LY12 aluminum alloy of different areas in 3.5% NaC1 solution was studied. The free corrosion potentials, galvanic potentials and currents of these galvanic couples were measured. The galvanic effects were determined by the mass loss and regression method using three points. The results show that: (1) In these four kinds of couples AZ91D acts as the anode, whose galvanic corrosion behavior is mainly controlled by the cathodic polarization; (2) The free corrosion potentials of these four kinds of couples change a liffle with time and cathodic/anodic area ratio (CAAR); (3) The galvanic potential of AZ91D/LY12 moves positively with the increase of time and CAAR; (4) The galvanic currents increase with CAAR, but there is difference in the current change between different couples; (5) The anodic dissolution rate of the magnesium alloy increases by 2-3 orders after being coupled with these four kinds of metals and the galvanic effects of these couples have such a relation as γH62>γ316LS.S>γLY12 >γA3.

  1. Formation of Structure and Properties in Casting Processes on the Example of AZ91 Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    Augustyn B.

    2014-06-01

    Full Text Available Contemporary materials engineering requires the use of materials characterised by high mechanical properties, as these precisely properties determine the choice of material for parts of machinery and equipment. Owing to these properties it is possible to reduce the weight and, consequently, the consumption of both material and energy. Trying to meet these expectations, the designers are increasingly looking for solutions in the application of magnesium alloys as materials offering a very beneficial strength-to-weight ratio. However, besides alloying elements, the properties are to a great extent shaped by the solidification conditions and related structure. The process of structure formation depends on the choice of casting method forced by the specific properties of casting or by the specific intended use of final product. The article presents a comparison of AZ91 magnesium alloys processed by different casting technologies. A short characteristic was offered for materials processed by the traditional semi-continuous casting process, which uses the solidification rates comprised in a range of 5 - 20°C/s, and for materials made in the process of Rapid Solidification, where the solidification rate can reach 106 °C/s. As a result of the casting process, a feedstock in the form of billets and thin strips was obtained and was subjected next to the process of plastic forming. The article presents the results of structural analysis of the final product. The mechanical properties of the ø7 mm extruded rods were also evaluated and compared.

  2. Effect of high density electropulsing treatment on formability of TC4 titanium alloy sheet

    Institute of Scientific and Technical Information of China (English)

    SONG Hui; WANG Zhong-jin; GAO Tie-jun

    2007-01-01

    An annealed TC4 titanium alloy sheet was treated by high density electropulsing (Jmax=(5.09-5.26)×103A/mm2, tp=110 μs) under ambient conditions. The effect of electropulsing treatment(EPT) on the plastic deformation behavior of TC4 titanium alloy sheet was studied using uniaxial tension tests. The experimental results indicate that electropulsing treatment significantly changes the mechanical properties of sheet metal: the uniform elongation is increased by 35%, the yield stress is decreased by 19.8% and the yield to tensile ratio is decreased by 17.6%. It is of significant meaning to improve the formability of TC4 titanium alloy sheet. The optical microscope and scanning electron microscope(SEM) were used to examine the changes of the microstructure and the fracture morphology before and after the electropulsing treatment. It is found that recrystallization occurs in the sheet metal and dimples in fracture surface are large and deep after the electropulsing treatment. The research results show that the electropulsing treatment is an effective method to improve the formability of titanium alloy sheets.

  3. Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants

    Energy Technology Data Exchange (ETDEWEB)

    Abdal-hay, Abdalla [Departmentt of Bionano System Engineering, College of Engineering, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Department of Mechanical Design Engineering, Advanced wind power system research institute, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Dewidar, Montasser [Department of Materials and Mechanical Design, Faculty of Energy Engineering, South Valley University, Aswan (Egypt); Lim, Jae Kyoo, E-mail: jklim@jbnu.ac.kr [Department of Mechanical Design Engineering, Advanced wind power system research institute, Chonbuk National University, Jeonju 561-756 (Korea, Republic of)

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer The corrosion behavior of magnesium for orthopedic applications is extremely poor. Black-Right-Pointing-Pointer The solvent (DCM, THF and DMF) had a strong effect on the coatings performance. Black-Right-Pointing-Pointer Mg bar alloy coated with PVAc/DCM layers provided an excellent bonding strength. Black-Right-Pointing-Pointer Treated samples indicated significant damping for the degradation rate. Black-Right-Pointing-Pointer Cytocompatibility on MC3T3 cells of the PVAc/DCM samples revealed a good behavior. - Abstract: The present study was ultimately aimed to design novel adhesive biodegradable polymer, poly(vinyl acetate) (PVAc), coatings onto Mg based alloys by the dip-coating technique in order to control the degradation rate and enhance the biocompatibility of magnesium alloys. The influence of various solvents on PVAc surface topography and their protection of Mg alloys were dramatically studied in vitro. Electrochemical polarization, degradation, and PVAc film cytocompatibility were also tested. Our results showed that the solvent had a significant effect on coating quality. PVAc/dichloromethane solution showed a porous structure and solution concentration could control the porous size. The coatings prepared using tetrahydrofuran and dimethylformamide solvents are exceptional in their ability to generate porous morphology even at low polymer concentration. In general, the corrosion performance appears to be different on different PVAc-solvent system. Immersion tests illustrated that the porous morphology on PVAc stabilized corrosion rates. A uniform corrosion attack in artificial simulation body fluid was also exhibited. The cytocompatibility of osteoblast cells (MC3T3) revealed high adherence, proliferation, and survival on the porous structure of PVAc coated Mg alloy, which was not observed for the uncoated samples. This novel PVAc coating is a promising candidate for biodegradable implant materials, which might

  4. Spectroscopic study of plasma during electrolytic oxidation of magnesium- and aluminium-alloy

    Science.gov (United States)

    Jovović, J.; Stojadinović, S.; Šišović, N. M.; Konjević, N.

    2012-10-01

    We present the results of an optical emission spectroscopy study of Plasma during Electrolytic Oxidation (PEO) of magnesium- and aluminum-alloy. Plasma electron number density Ne diagnostics is performed either from the Hβ line shape or from the width or shift of non-hydrogenic ion lines of aluminum and magnesium. The line profile analysis of the Hβ suggests presence of two PEO processes characterized by relatively low electron number densities Ne≈1.2×1015 cm-3 and Ne≈2.3×1016 cm-3. Apart from these two low Ne processes, there is the third one related to the ejection of evaporated anode material through micro-discharge channels. This process is characterized by larger electron density Ne=(1.2-1.6)1017 cm-3, which is detected from the shape and shift of aluminum and magnesium singly charged ion lines. Two low Ne values detected from the Hβ and large Ne measured from the widths and shift of ion lines suggest presence of three types of discharges during PEO with aluminum- and magnesium-alloy anode. On the basis of present and earlier results one can conclude that low Ne processes do not depend upon anode material or electrolyte composition.The electron temperature of 4000 K and 33,000 K are determined from relative intensities of Mg I and O II lines, respectively. The attention is drawn to the possibility of Ne application for Te evaluation using Saha equation what is of importance for PEO metal plasma characterization. During the course of this study, difficulties in the analysis of spectral line shapes are encountered and the ways to overcome some of the obstacles are demonstrated.

  5. Surface characteristics and corrosion behaviour of WE43 magnesium alloy coated by SiC film

    Science.gov (United States)

    Li, M.; Cheng, Y.; Zheng, Y. F.; Zhang, X.; Xi, T. F.; Wei, S. C.

    2012-01-01

    Amorphous SiC film has been successfully fabricated on the surface of WE43 magnesium alloy by plasma enhanced chemical vapour deposition (PECVD) technique. The microstructure and elemental composition were analyzed by transmission electron microscopy (TEM), glancing angle X-ray diffraction (GAXRD) and X-ray photoelectron spectroscopy (XPS), respectively. The immersion test indicated that SiC film could efficiently slow down the degradation rate of WE43 alloy in simulated body fluid (SBF) at 37 ± 1 °C. The indirect toxicity experiment was conducted using L929 cell line and the results showed that the extraction medium of SiC coated WE43 alloys exhibited no inhibitory effect on L929 cell growth. The in vitro hemocompatibility of the samples was investigated by hemolysis test and blood platelets adhesion test, and it was found that the hemolysis rate of the coated WE43 alloy decreased greatly, and the platelets attached on the SiC film were slightly activated with a round shape. It could be concluded that SiC film prepared by PECVD made WE43 alloy more appropriate to biomedical application.

  6. Surface characteristics and corrosion behaviour of WE43 magnesium alloy coated by SiC film

    Energy Technology Data Exchange (ETDEWEB)

    Li, M. [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Cheng, Y., E-mail: chengyan@pku.edu.cn [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Zheng, Y.F. [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Department of Advanced Materials and Nanotechnology, College of Engineering, Peking University, Beijing 100871 (China); Zhang, X.; Xi, T.F. [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Wei, S.C. [Center for Biomedical Materials and Tissue Engineering, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Department of Oral and Maxillofacial Surgery, School and Hospital of Stomatology, Peking University, Beijing 100871 (China)

    2012-01-15

    Amorphous SiC film has been successfully fabricated on the surface of WE43 magnesium alloy by plasma enhanced chemical vapour deposition (PECVD) technique. The microstructure and elemental composition were analyzed by transmission electron microscopy (TEM), glancing angle X-ray diffraction (GAXRD) and X-ray photoelectron spectroscopy (XPS), respectively. The immersion test indicated that SiC film could efficiently slow down the degradation rate of WE43 alloy in simulated body fluid (SBF) at 37 {+-} 1 Degree-Sign C. The indirect toxicity experiment was conducted using L929 cell line and the results showed that the extraction medium of SiC coated WE43 alloys exhibited no inhibitory effect on L929 cell growth. The in vitro hemocompatibility of the samples was investigated by hemolysis test and blood platelets adhesion test, and it was found that the hemolysis rate of the coated WE43 alloy decreased greatly, and the platelets attached on the SiC film were slightly activated with a round shape. It could be concluded that SiC film prepared by PECVD made WE43 alloy more appropriate to biomedical application.

  7. Passive behavior of magnesium alloys (Mg-Zr) containing rare-earth elements in alkaline media

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, R. [ICEMS, Instituto Superior Tecnico, Technical University of Lisbon (Portugal); Ferreira, M.G.S. [ICEMS, Instituto Superior Tecnico, Technical University of Lisbon (Portugal); CICECO, Universidade de Aveiro (Portugal); Carmezim, M.J. [ICEMS, Instituto Superior Tecnico, Technical University of Lisbon (Portugal); Instituto Politecnico de Setubal, ESTSetubal, DEM (Portugal); Montemor, M.F., E-mail: mfmontemor@ist.utl.p [ICEMS, Instituto Superior Tecnico, Technical University of Lisbon (Portugal)

    2010-02-28

    The passive behavior of magnesium alloys ZK31, EZ33 and WE54 was studied in alkaline media (NaOH - pH 13) in the presence and absence of chloride ions. The electrochemical properties were investigated by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and capacitance measurements. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed for the study of the chemical composition and surface morphology of the surface films, respectively. The electrochemical impedance results revealed that the film formed on the surface of the three alloys is characterized by an increasing resistance, which stabilized with time. In the absence of chloride the film resistance was identical for all the three alloys. However, in the presence of chloride, the resistance of the film formed on the EZ33 alloy dropped nearly one order of magnitude comparatively to the other alloys. Generally, in the presence of chloride there was a decrease of the conductive character of the film. The films are homogeneous and, according to the XPS results, the outer layer seemed mainly composed of Mg(OH){sub 2} and the internal layer composed of MgO, independently of the presence of chloride. The AFM study revealed that the presence of chloride affected film morphology, namely nano-crystallites dimensions and aggregates size that increased.

  8. Increased corrosion resistance of the AZ80 magnesium alloy by rapid solidification.

    Science.gov (United States)

    Aghion, E; Jan, L; Meshi, L; Goldman, J

    2015-11-01

    Magnesium (Mg) and Mg-alloys are being considered as implantable biometals. Despite their excellent biocompatibility and good mechanical properties, their rapid corrosion is a major impediment precluding their widespread acceptance as implantable biomaterials. Here, we investigate the potential for rapid solidification to increase the corrosion resistance of Mg alloys. To this end, the effect of rapid solidification on the environmental and stress corrosion behavior of the AZ80 Mg alloy vs. its conventionally cast counterpart was evaluated in simulated physiological electrolytes. The microstructural characteristics were examined by optical microscopy, SEM, TEM, and X-ray diffraction analysis. The corrosion behavior was evaluated by immersion, salt spraying, and potentiodynamic polarization. Stress corrosion resistance was assessed by Slow Strain Rate Testing. The results indicate that the corrosion resistance of rapidly solidified ribbons is significantly improved relative to the conventional cast alloy due to the increased Al content dissolved in the α-Mg matrix and the correspondingly reduced presence of the β-phase (Mg17 Al12 ). Unfortunately, extrusion consolidated solidified ribbons exhibited a substantial reduction in the environmental performance and stress corrosion resistance. This was mainly attributed to the detrimental effect of the extrusion process, which enriched the iron impurities and increased the internal stresses by imposing a higher dislocation density. In terms of immersion tests, the average corrosion rate of the rapidly solidified ribbons was <0.4 mm/year compared with ∼2 mm/year for the conventionally cast alloy and 26 mm/year for the rapidly solidified extruded ribbons.

  9. Magnesium alloys and graphite wastes encapsulated in cementitious materials: Reduction of galvanic corrosion using alkali hydroxide activated blast furnace slag.

    Science.gov (United States)

    Chartier, D; Muzeau, B; Stefan, L; Sanchez-Canet, J; Monguillon, C

    2017-03-15

    Magnesium alloys and graphite from spent nuclear fuel have been stored together in La Hague plant. The packaging of these wastes is under consideration. These wastes could be mixed in a grout composed of industrially available cement (Portland, calcium aluminate…). Within the alkaline pore solution of these matrixes, magnesium alloys are imperfectly protected by a layer of Brucite resulting in a slow corrosion releasing hydrogen. As the production of this gas must be considered for the storage safety, and the quality of wasteform, it is important to select a cement matrix capable of lowering the corrosion kinetics. Many types of calcium based cements have been tested and most of them have caused strong hydrogen production when magnesium alloys and graphite are conditioned together because of galvanic corrosion. Exceptions are binders based on alkali hydroxide activated ground granulated blast furnace slag (BFS) which are presented in this article. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Laser cladding of Zr-based coating on AZ91D magnesium alloy for improvement of wear and corrosion resistance

    Indian Academy of Sciences (India)

    Kaijin Huang; Xin Lin; Changsheng Xie; T M Yue

    2013-02-01

    To improve the wear and corrosion resistance of AZ91D magnesium alloy, Zr-based coating made of Zr powder was fabricated on AZ91D magnesium alloy by laser cladding. The microstructure of the coating was characterized by XRD, SEM and TEM techniques. The wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature. The corrosion resistance of the coating was tested in simulated body fluid. The results show that the coating mainly consists of Zr, zirconium oxides and Zr aluminides. The coating exhibits excellent wear resistance due to the high microhardness of the coating. The main wear mechanism of the coating and the AZ91D sample are different, the former is abrasive wear and the latter is adhesive wear. The coating compared to AZ91D magnesium alloy exhibits good corrosion resistance because of the good corrosion resistance of Zr, zirconium oxides and Zr aluminides in the coating.

  11. Mussel-inspired nano-multilayered coating on magnesium alloys for enhanced corrosion resistance and antibacterial property.

    Science.gov (United States)

    Wang, Bi; Zhao, Liang; Zhu, Weiwei; Fang, Liming; Ren, Fuzeng

    2017-09-01

    Magnesium alloys are promising candidates for load-bearing orthopedic implants due to their biodegradability and mechanical resemblance to natural bone tissue. However, the high degradation rate and the risk of implant-associated infections pose grand challenges for their clinical applications. Herein, we developed a nano-multilayered coating strategy through polydopamine and chitosan assisted layer-by-layer assembly of osteoinductive carbonated apatite and antibacterial sliver nanoparticles on the surface of AZ31 magnesium alloys. The fabricated nano-multilayered coating can not only obviously enhance the corrosion resistance but also significantly increase the antibacterial activity and demonstrate better biocompatility of magnesium alloys. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Dynamic recrystallization behavior of AZ61 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    ZHOU Hai-tao; YAN An-qing; LIU Chu-ming

    2005-01-01

    An AZ61 alloy was subjected to hot compression at temperatures ranging from 523 K to 673 K,with strain rates of 0. 001 - 1 s-1. Flow softening occurs at all temperatures and strain rates. There are peak and plateau stresses on flow curves. The initiation and evolution of dynamic recrystallization(DRX) were studied by the flow softening mechanism based on the flow curves and microstructural observations. A linear relationship was established between the logarithmic value of the critical strain for DRX initiation(lnεc) and the logarithmic value of the Zener-Hollomon parameter (lnZ). The volume fraction of DRX grain (ψd) is formulated as a function of the process parameters including strain rate, temperature, and strain. The calculated values of ψd agree well with the values extracted from the flow curves. The size of DRX grain(d) was also formulated as a function of the ZenerHollomon parameter. This study suggests that DRX behavior of AZ61 can be predicated from plastic process parameters.

  13. Relationships between deformation mechanisms and initial textures in polycrystalline magnesium alloys AZ31

    Institute of Scientific and Technical Information of China (English)

    YANG Ping(杨平); CUI Fen-ge(崔凤娥); BIAN Jian-hua(边建华); G Gottstein

    2003-01-01

    Microscopy, X-ray diffractometry and EBSD analysis were applied to inspect the relationships between deformation mechanisms and initial textures in polycrystalline magnesium alloys AZ31. It is found that different deformation mechanisms proceed according to theoretic prediction. Basal slips occur when basal planes of grains are tilted toward normal direction(ND) around transverse direction(TD); prism slips dominate when basal planes are perpendicular to TD. {1012} twinning was favored when basal planes are normal to rolling direction(RD) and {1011} twinning is analyzed to be related to the basal orientation of grains.

  14. Microstructure character of AZ80 magnesium alloy ingots cast under electromagnetic vibration

    Institute of Scientific and Technical Information of China (English)

    GUO Shi-jie; LE Qi-chi; ZHAO Zhi-hao; CUI Jian-zhong

    2007-01-01

    Microstructure evolutions of an AZ80 magnesium alloy ingot with 300 mm in diameter cast with and without the electromagnetic vibration was investigated. The microstructures of the ingot cast with the conventional DC exhibited relatively fine dendritic grains at the surface area, but coarse dendritic grains at the 1/2 radius and large equiaxed dendritic grains at the center. However, under the electromagnetic vibration casting condition, the microstructures of the ingot is significantly refined, especially those at the surface and at the center.

  15. Synthesis of hybrid sol-gel coatings for corrosion protection of we54-ae magnesium alloy

    Science.gov (United States)

    Hernández-Barrios, C. A.; Duarte, N. Z.; Hernández, L. M.; Peña, D. Y.; Coy, A. E.; Viejo, F.

    2013-11-01

    The present work shows some preliminary results related to the synthesis, characterization and corrosion evaluation of different hybrid sol-gel coatings applied on the WE54-AE magnesium alloy attending to the two experimental variables, i.e. the precursors ratio and the aging time, which may affect the quality and the electrochemical properties of the coatings resultant. The experimental results confirmed that, under some specific experimental conditions, it was possible to obtain homogeneous and uniform, porous coatings with good corrosion resistance that also permit to accommodate corrosion inhibitors.

  16. Preparation of micro-arc oxidation coatings on magnesium alloy and its thermal shock resistance property

    Institute of Scientific and Technical Information of China (English)

    JIANG Zhaohua; ZENG Xiaobin; YAO Zhongping

    2006-01-01

    In the NaAlO2-Na2SiO3 compound system, the ceramic coatings were prepared on magnesium alloy by micro-arc oxidation. The morphology, phase composition, and thermal shock resistance of the ceramic coatings were studied by scanning electron microscope, X-ray diffraction and thermal shock tests, respectively. The results showed that the ceramic coating contains MgO, MgAl2O4, as well as a little amount of Mg2SiO4. The thickness of the ceramic coatings induced ceramic coating is the best. The hardness of the ceramic coating is up to 10 GPa or so.

  17. Evaluation of microstructural effects on the corrosion behaviour of AZ91D magnesium alloy

    DEFF Research Database (Denmark)

    Ambat, Rajan; Aung, Naing Naing; Zhou, W.

    2000-01-01

    The effect of microconstituents on the corrosion and electrochemical behaviour of AZ91D alloy prepared by die-casting and ingot casting route has been investigated in 3.5% NaCl solution at pH 7.25. The experimental techniques used include constant immersion technique, in-situ corrosion monitoring....... The corrosion products for ingot consisted of Mg(OH)(2) with small amounts beta phase, magnesium-aluminum oxide and MgH2 while for die-cast, the product showed a highly amorphous structure. (C) 2000 Elsevier Science Ltd. All rights reserved....

  18. A systematic multiscale modeling and experimental approach to protect grain boundaries in magnesium alloys from corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Horstemeyer, Mark R. [Mississippi State Univ., Mississippi State, MS (United States); Chaudhuri, Santanu [Univ. of Illinois, Urbana-Champaign, IL (United States)

    2015-09-30

    A multiscale modeling Internal State Variable (ISV) constitutive model was developed that captures the fundamental structure-property relationships. The macroscale ISV model used lower length scale simulations (Butler-Volmer and Electronics Structures results) in order to inform the ISVs at the macroscale. The chemomechanical ISV model was calibrated and validated from experiments with magnesium (Mg) alloys that were investigated under corrosive environments coupled with experimental electrochemical studies. Because the ISV chemomechanical model is physically based, it can be used for other material systems to predict corrosion behavior. As such, others can use the chemomechanical model for analyzing corrosion effects on their designs.

  19. Microstructural Characterization of a Magnesium Alloy Processed by Equal Channel Angular Pressing

    Directory of Open Access Journals (Sweden)

    Florina Diana Dumitru

    2014-07-01

    Full Text Available Samples of as-extruded ZK60 magnesium alloy were subjected to 6 passes of equal-channel angular pressing (ECAP following route A. The processing temperature was decreased with the number of passes. The structural evolution of the deformed samples was analyzed using Electron Backscattered Diffraction (EBSD and X-Ray Diffraction. The grain boundary misorientation distribution showed a reduction in the grain size accompanied bya large proportion of high angle grain boundaries and the presence of recrystallization processes. XRD results showed that with the increment of the applied strain the peaks presented a slight variation of the angles.

  20. Microstructural Aspects in FSW and TIG Welding of Cast ZE41A Magnesium Alloy

    Science.gov (United States)

    Carlone, Pierpaolo; Astarita, Antonello; Rubino, Felice; Pasquino, Nicola

    2016-04-01

    In this paper, magnesium ZE41A alloy plates were butt joined through friction stir welding (FSW) and Tungsten Inert Gas welding processes. Process-induced microstructures were investigated by optical and SEM observations, EDX microanalysis and microhardness measurements. The effect of a post-welded T5 heat treatment on FSW joints was also assessed. Sound joints were produced by means of both techniques. Different elemental distributions and grain sizes were found, whereas microhardness profiles reflect microstructural changes. Post-welding heat treatment did not induce significant alterations in elemental distribution. The FSW-treated joint showed a more homogeneous hardness profile than the as-welded FSW joint.

  1. Evaluation of Microstructure and Mechanical Property of FSW Welded MB3 Magnesium Alloy

    Institute of Scientific and Technical Information of China (English)

    WANG Kuai-she; SHEN Yang; YANG Xi-rong; WANG Xun-hong; XU Ke-wei

    2006-01-01

    An experiment was carried out on the friction stir welding of MB3 magnesium alloy to determine welding parameters for obtaining an excellent weld appearance without void, cracking, or distortion. Frictional heat and plastic flow created fine and equiaxed grains in the weld nugget, and the elongated and recovered grains in the thermomechanically affected zone (TMAZ). The grains in the heat affected zone (HAZ) grow slightly. The mechanical property results show that maximum joint tensile strength can reach 97.2% of the parent material, which is stronger than that of fusion joints; and the failure almost occurs in the heat affected zone.

  2. Phosphating process of AZ31 magnesium alloy and corrosion resistance of coatings

    Institute of Scientific and Technical Information of China (English)

    CHENG Ying-liang; WU Hai-lan; CHEN Zhen-hua; WANG Hui-min; LI Ling-ling

    2006-01-01

    Zinc phosphate films were formed on AZ31 magnesium alloy by immersing into a phosphatation bath to enhance the corrosion resistance of AZ31. Different films were prepared by changing the processing parameters such as immersing time and temperature. The corrosion protection of the coatings was studied by electrochemical measurements such as electrochemical impedance spectroscopy, potentiodynamic polarization curves, and the structure of the films were studied by metalloscopy and X-ray diffraction (XRD). The results show that, the film formed at 80 ℃, 10 min has the highest corrosion resistance. The XRD patterns show that the film consists of hopeite (Zn3(PO4)2·xH2O).

  3. Numerical simulation and experimental study on cavity growth in uniaxial tension of superplastic magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    于彦东; 张凯锋; 郑海荣; 蒋大鸣

    2003-01-01

    The cavity growth was studied in uniaxial tension of superplastic magnesium alloy. An exponentially increasing cavity growth model was introduced into the numerical simulation effectively. A three-dimensional rigid visco-plastic finite element method (FEM) program was developed to predict the variation of radius and volume fraction of cavity. Experimental radius and volume fraction of cavity were determined based on the optical microscope observation and analyses. The values obtained by numerical simulation are perfectly in agreement with experimental results. The results are potentially helpful to designing the optimal processing parameters for superplastic forming of materials and to enhance their subsequent mechanical properties.

  4. Hot deformation mechanisms and microstructural control in high-temperature extruded AZ31 magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, Y.V.R.K.; Rao, K.P. [Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong, Tat Chee Avenue, Kowloon (China)

    2007-07-15

    A Processing map has been developed for Magnesium alloy AZ31 extruded at 450 C which revealed that the extruded rods may be further processed into components industrially at 400 C and at a strain rate of 10 s{sup -1}. If processed at lower strain rates in the vicinity of 0.1 s{sup -1}, unusual grain size variations with temperature and strain rate are observed, suggesting that grain size control will be difficult. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  5. Effect of side transmission of power ultrasonic on structure of AZ81 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    张海波; 翟启杰; 戚飞鹏; 龚永勇

    2004-01-01

    In order to promote the application of power ultrasonic in metallurgic industry, ultrasonic vibration is introduced from the side of AZ81 ingot by adopting the automatic-attracting amplitude transformer horn which has independently been designed and produced, and the effect of the side transmission of ultrasonic on the solidification structure of metal is investigated. The results show that under this experimental condition, power ultrasonic can greatly improve the solidification structure of AZ81 magnesium alloy. Compared with the traditional modification methods in which inoculants are added into melt, power ultrasonic has a better performance. The present research gives us a new way for the application of ultrasonic refinement technique.

  6. Residual Stresses in Microarc Oxidation Ceramic Coatings on Biocompatible AZ31 Magnesium Alloys

    Science.gov (United States)

    Gu, Yanhong; Xiong, Wenming; Ning, Chengyun; Zhang, Jing

    2012-06-01

    Ceramic coatings have been successfully prepared on biocompatible AZ31 magnesium alloy substrates using microarc oxidation (MAO) technique. Residual stresses attributed to the MgO constituent of the coatings at different oxidation voltages have been evaluated by x-ray diffraction using the sin2 ψ method. It is found that tensile residual stresses were present in the coatings, and they decreased from 1418 to 545 MPa as the oxidation voltages increased from 250 to 350 V. Correlations between the residual stresses and microstructural morphology have been discussed. The residual stress characteristics are attributed to the microcracks and the new phase formation during the MAO process.

  7. Numerical and experimental evaluation of Nd:YAG laser welding efficiency in AZ31 magnesium alloy butt joints

    Science.gov (United States)

    Scintilla, Leonardo Daniele; Tricarico, Luigi

    2013-02-01

    In this paper, energy aspects related to the efficiency of laser welding process using a 2 kW Nd:YAG laser were investigated and reported. AZ31B magnesium alloy sheets 3.3 mm thick were butt-welded without filler using Helium and Argon as shielding gases. A three-dimensional and semi-stationary finite element model was developed to evaluate the effect of laser power and welding speed on the absorption coefficient, the melting and welding efficiencies. The modeled volumetric heat source took into account a scale factor, and the shape factors given by the attenuation of the beam within the workpiece and the beam intensity distribution. The numerical model was calibrated using experimental data on the basis of morphological parameters of the weld bead. Results revealed a good correspondence between experiment and simulation analysis of the energy aspects of welding. Considering results of mechanical characterization of butt joints previously obtained, the optimization of welding condition in terms of mechanical properties and energy parameters was performed. The best condition is represented by the lower laser power and higher welding speed that corresponds to the lower heat input given to the joint.

  8. Comparison of magnesium alloys and poly-l-lactide screws as degradable implants in a canine fracture model.

    Science.gov (United States)

    Marukawa, Eriko; Tamai, Masato; Takahashi, Yukinobu; Hatakeyama, Ichiro; Sato, Masaru; Higuchi, Yusuke; Kakidachi, Hiroshi; Taniguchi, Hirofumi; Sakamoto, Takamitsu; Honda, Jun; Omura, Ken; Harada, Hiroyuki

    2016-10-01

    The aims of this study were to evaluate in vivo the biological responses to implants composed of biodegradable anodized WE43 (containing magnesium yttrium, rare earth elements and zirconium; Elektron SynerMag®) magnesium alloy, monolithic WE43 magnesium alloy and poly-l-lactic acid (PLLA), which are commonly used materials in clinic settings, and to evaluate the effectiveness of the materials as bone screws. The effectiveness of the magnesium alloy implants in osteosynthesis was evaluated using a bone fracture model involving the tibia of beagle dogs. For the monolithic WE43 implants, radiological, and histological evaluation revealed that bone trabeculae around the implanted monolithic WE43 decreased because of an inflammatory response. However, there was no damage due to hydrogen gas or inflammatory response in the bone tissue around the anodized WE43 implants. After 4 weeks, all the PLLA implants (n = 3) had broken but the WE43 implants had not (n = 6). These results suggest that the WE43 implants had sufficient strength to fix bone fractures at load-bearing sites in orthopedic and oral maxillofacial surgery. Therefore, these biodegradable magnesium alloys are good candidates for replacing biodegradable polymers. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1282-1289, 2016.

  9. Density Functional Theory Simulations Predict New Materials for Magnesium-Ion Batteries (Fact Sheet), NREL Highlights, Science

    Energy Technology Data Exchange (ETDEWEB)

    2011-10-01

    Multivalence is identified in the light element, B, through structure morphology. Boron sheets exhibit highly versatile valence, and the layered boron materials may hold the promise of a high-energy-density magnesium-ion battery. Practically, boron is superior to previously known multivalence materials, especially transition metal compounds, which are heavy, expensive, and often not benign. Based on density functional theory simulations, researchers at the National Renewable Energy Laboratory (NREL) have predicted a series of stable magnesium borides, MgB{sub x}, with a broad range of stoichiometries, 2 < x < 16, by removing magnesium atoms from MgB{sub 2}. The layered boron structures are preserved through an in-plane topological transformation between the hexagonal lattice domains and the triangular domains. The process can be reversibly switched as the charge transfer changes with Mg insertion/extraction. The mechanism of such a charge-driven transformation originates from the versatile valence state of boron in its planar form. The discovery of these new physical phenomena suggests the design of a high-capacity magnesium-boron battery with theoretical energy density 876 mAh/g and 1550 Wh/L.

  10. Magnesium in diet

    Science.gov (United States)

    ... sources of magnesium: Fruits or vegetables (such as bananas, dried apricots, and avocados) Nuts (such as almonds ... Supplements, National Institutes of Health. Dietary Supplement Fact Sheet: Magnesium . ods.od.nih.gov/factsheets/Magnesium-Consumer . ...

  11. Design and development of self-passivating biodegradable magnesium alloys using selective element oxidation

    Science.gov (United States)

    Brar, Harpreet Singh

    Metallic biomaterials such as stainless steels, titanium alloys, and cobalt-chromium alloys have been used as structural implant materials for many years. However, due to their limitations in temporary implant applications, there has been increased interest in the development of a biodegradable structural implant device. Magnesium (Mg) alloys have shown great potential as a material for biodegradable structural implant applications. However, low strength and high degradation rate of Mg under physiological conditions are major limitations, causing the implant to lose its structural integrity before the healing process is complete. The main aim of this work was to investigate the possibility of designing Mg-based alloys with ability to form selective protective oxides, thereby aiding in the reduction of the initial degradation rate. A thermodynamics-driven design was utilized to select three elements, namely Gadolinium (Gd), Scandium (Sc) and Yttrium (Y), due to the low enthalpy of formation associated with their oxide species. First, binary alloys were cast under inert atmosphere, solution treated and investigated for degradation rate in Hanks' solution. The Mg-Gd binary alloy showed the fastest degradation rate whereas the Mg-Sc binary alloy showed the slowest degradation rate. The degradation of Mg-Gd and Mg-Y was 18 and 5 times faster than Mg-Sc alloy, respectively. The microstructural analysis of the alloys was performed using X-ray Diffraction (XRD), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). It was observed that the grain size of Mg-Sc alloys is significantly smaller than Mg-Gd and Mg-Y alloys and can be a contributing factor to the reduction in degradation rate. The hardness behavior of the alloys was also investigated using Vickers microhardness Testing. To understand the oxidation behavior and kinetics, samples were oxidized in pure oxygen environment and investigated using microstructural and thermogravimetric analysis (TGA). Auger

  12. Effect of PEO-modes on the electrochemical and mechanical properties of coatings on MA8 magnesium alloy

    Science.gov (United States)

    Sidorova, M. V.; Sinebrukhov, S. L.; Khrisanfova, O. A.; Gnedenkov, S. V.

    Protective surface layers with a high corrosion stability and significant microhardness as compared to the substrate material were obtained on MA8 magnesium alloy by Plasma Electrolytic Oxidation (PEO) in a silicate-fluoride electrolyte. The phase and elemental composition of the coatings were investigated. It was found that the application of the bipolar PEO-modes enables one to synthesize on the alloy's surface a high-temperature phase of magnesium silicate, forsterite (Mg2SiO4) having a good anticorrosion and mechanical properties.

  13. Effect of Intermediate Annealing on Microstructure and Property of 5182 Aluminum Alloy Sheet for Automobile

    Directory of Open Access Journals (Sweden)

    WANG Yu

    2016-09-01

    Full Text Available Effect of intermediate annealing on the microstructure and properties of 5182 aluminum alloy sheet with full annealed state (5182-O was investigated by means of optical microscope, scanning electron microscope and universal testing machine. The results indicate that compared with 5182-O sheet without intermediate annealing, 5182-O sheet with intermediate annealing possesses too fine grain size, intermetallic compounds not broken enough, larger size intermetallic particles, less dispersed phase. Yield strength and ultimate tensile strength, work hardening exponent and normal anisotropy of plastic strain ratio decrease but planner anisotropy of plastic strain ratio increases. The mechanical properties and forming ability of 5182-O aluminum alloy sheet and its microstructure are not improved significantly after intermediate annealing.

  14. Fretting Behavior of SPR Joining Dissimilar Sheets of Titanium and Copper Alloys

    Directory of Open Access Journals (Sweden)

    Xiaocong He

    2016-12-01

    Full Text Available The fretting performance of self-piercing riveting joining dissimilar sheets in TA1 titanium alloy and H62 copper alloy was studied in this paper. Load-controlled cyclic fatigue tests were carried out using a sine waveform and in tension-tension mode. Scanning electron microscopy and energy-dispersive X-ray techniques were employed to analyze the fretting failure mechanisms of the joints. The experimental results showed that there was extremely severe fretting at the contact interfaces of rivet and sheet materials for the joints at relatively high loads levels. Moreover, the severe fretting in the region on the locked sheet in contact with the rivet was the major cause of the broken locked sheet for the joints at low load level.

  15. Effects of rare earth elements on the microstructure and properties of magnesium alloy AZ91D

    Institute of Scientific and Technical Information of China (English)

    KaikunWang; KuiZhang; 等

    2002-01-01

    The effects of rare earth elements on the microstructure and properties of Magnesium alloy AZ91D alloy were studied.The different proportion of rare earth elements was added to the AZ91D and the tensile tests were carried out at different temperatures.The experimental results show that at room temperature or at 120℃ the AZ91D's decrease with the increasing amount of the rare earth elements.however,the ductility is improved.The influence of 0.14%Sb(mass fraction)on the AZ91D's strength is like that of rare earth elements(0.2%-0.4%)(mass fraction).Microstructure graphs demonstrate that appropriate amount of rare earth elements (0.1%-0.2%) can fine AZ91D's grain and improve its ductility.

  16. Effects of rare earth elements on the microstructureand properties of magnesium alloy AZ91D

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The effects of rare earth elements on the microstructure and properties of magnesium alloy AZ91D alloy were studied. The different proportion of rare earth elements was added to the AZ91D and the tensile tests were carried out at different temperatures. The experimental results show that at room temperature or at 120℃ the AZ91D's strength decrease with the increasing amount of the rare earth elements. However, the ductility is improved. The influence of 0.14%Sb (mass fraction) on the AZ91D's strength is like that of rare earth elements (0.2%-0.4%) (mass fraction). Microstructure graphs demonstrate that appropriate amount of rare earth elements (0.1%-0.2%) can fine AZ91D's grain and improve its ductility.

  17. Effect of rare earth elements on the microstructure and property for magnesium alloy AM60B

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The effects of rare earth elements on the microstructure and properties of magnesium alloy AM60B alloy were studied. Different proportions of rare earth elements were added to AM60B and the tensile tests were carried out under different temperatures. The experimental results show that at room temperature the tensile strength of AM60B can be improved with the addition of rare earth elements. The ductility of which at room or elevated temperature (120℃) can also be improved, and the ductility is to some extent in proportion with the amount of rare earth elements. The ductility at 120℃ is better than that at room temperature. The microstructure graphs demonstrate that appropriate amount of rare earth elements (0.1%-0.2%, mass fraction) can fine AM60B's grain and improve its ductility.

  18. Theoretical and experimental research of hammer forging process of RIM from AZ31 magnesium alloy

    Directory of Open Access Journals (Sweden)

    A. Gontarz

    2014-10-01

    Full Text Available The results of theoretical analysis and experimental tests of hammer forging process of rim part from AZ31 magnesium alloy are presented in this paper. On the basis of numerical simulation results, the analysis of limiting phenomena was made. These phenomena include: possibility of overlapping presence, not filling of die impression, overheating of material and cracks. The results of theoretical analysis provided the support for planning of experimental tests in industrial conditions. Forging tests were conducted in one of Polish forming plants, applying steam-air hammer of blow energy 63 kJ. On the basis of experimental verification, it was stated that it is possible to obtain rim forging from AZ31 alloy of assumed quality in the hammer forging process.

  19. Characterization of damage evolution in an AM60 magnesium alloy by computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Waters, A.; Green, R.E.; Martz, H.; Dolan, K.; Horstemeyer, M.; Derrill, R.

    1999-06-16

    Lawrence Livermore National Lab and Sandia National Laboratories, CA are collaborating on the development of new techniques to study damage evolution and growth in material specimens subjected to mechanical loading. These techniques include metallography, radiography, computed tomography (CT) and modeling. The material specimens being studied include cast magnesium and aluminum alloys, and forged stainless steel. The authors concentrate on characterizing monotonically loaded Mg alloy specimens using CT. Several notched tensile specimens were uniaxially loaded to different percentages of the failure load. Specimens were initially characterized by radiography and computed tomography to determine the preloaded state. Subsequent CT scans were performed after the samples were loaded to different percentages of the load failure. The CT volumetric data are being used to measure void size, distribution and orientation in all three dimensions nondestructively to determine the effect of void growth on the mechanical behavior of the materials.

  20. Microstructure Evolution of Mg-Gd-Y-Zn-Zr Magnesium Alloy During Partial Remelting

    Directory of Open Access Journals (Sweden)

    Jianquan TAO

    2014-12-01

    Full Text Available The article deals with the research on the microstructure evolution of Mg-Gd-Y-Zn-Zr magnesium alloy through partial remelting process. It aims at finding out what effects the microstructure of semi-solid Mg-Gd-Y-Zn-Zr alloy will result in under different remelting temperatures and holding times. Based on the results, if to raise the remelting temperature and to prolong the holding time, the size of solid grain will tend to expand and its spheroidization degree also begins to show improvement. In addition, the grain shows tendency of coarsening when the holding time increases. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6483

  1. Achieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing

    Directory of Open Access Journals (Sweden)

    Roberto B. Figueiredo

    2017-04-01

    Full Text Available Equal-channel angular pressing provides an opportunity for refining the grain structure and introducing superplastic properties in magnesium alloys. This report describes the use of this processing technique with a ZK10 (Mg–1.0 wt.% Zn–0.26 wt.% Zr alloy. The grain structure was successfully refined from ∼12.9 to ∼5.2 μm after 4 passes and superplastic elongations were observed when testing at low strain rates at temperatures of 473 and 523 K. An analysis shows that the superplastic behavior is consistent with the conventional theoretical model for superplastic flow and at higher stresses and strain rates there is a transition to control by a viscous glide process.

  2. The Influence of Casting Defects on Fatigue Resistance of Elektron 21 Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    I. Pikos

    2013-04-01

    Full Text Available The Mg-RE alloys are attractive, constructional materials, especially for aircraft and automotive industry, thanks to combination of low density, good mechanical properties, also at elevated temperature, and good castability and machinability. Present paper contains results of fatigue resistance test carried out on Elektron 21 magnesium alloy, followed by microstructural and fractographical investigation of material after test. The as-cast material has been heat treated according to two different procedures. The fatigue resistance test has been conducted with 106 cycles of uniaxial, sine wave form stress between 9 MPa and 90 MPa. Fractures of specimens, which ruptured during the test, have been investigated with scanning electron microscope. The microstructure of specimens has been investigated with light microscopy. Detrimental effect of casting defects, as inclusions and porosity, on fatigue resistance has been proved. Also the influence of heat treatment's parameters has been described.

  3. Endothelialization of novel magnesium-rare earth alloys with fluoride and collagen coating.

    Science.gov (United States)

    Zhao, Nan; Workman, Benjamin; Zhu, Donghui

    2014-03-25

    Magnesium (Mg) alloys are promising scaffolds for the next generation of cardiovascular stents because of their better biocompatibility and biodegradation compared to traditional metals. However, insufficient mechanical strength and high degradation rate are still the two main limitations for Mg materials. Hydrofluoric acid (HF) treatment and collagen coating were used in this research to improve the endothelialization of two rare earth-based Mg alloys. Results demonstrated that a nanoporous film structure of fluoride with thickness of ~20 µm was formed on the Mg material surface, which improved the corrosion resistance. Primary human coronary artery endothelial cells (HCAECs) had much better attachment, spreading, growth and proliferation (the process of endothelialization) on HF-treated Mg materials compared to bare- or collagen-coated ones.

  4. Grain size and texture changes of magnesium alloy AZ31 during multi-directional forging

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Grain size and texture changes of magnesium alloy AZ31 were studied in multidirectional forging(MDF) under decreasing temperature conditions. MDF was carried out up to large cumulative strains of 4.8 with changing the loading direction during decrease in temperature from pass to pass. MDF can accelerate the uniform development of fine-grained structures and increase the plastic workability at low temperatures. As a result, the MDFed alloy shows excellent higher strength as well as moderate ductility at room temperature even at the grain size below 1 μm. Superplastic flow takes place at 423 K and depends on the anisotropy of MDFed samples. The mechanisms of strain-induced free-grained structure development and of the plastic deformation were discussed in detail.

  5. Microstructure Evolution of Mg-Gd-Y-Zn-Zr Magnesium Alloy During Partial Remelting

    Directory of Open Access Journals (Sweden)

    Jianquan TAO

    2014-12-01

    Full Text Available The article deals with the research on the microstructure evolution of Mg-Gd-Y-Zn-Zr magnesium alloy through partial remelting process. It aims at finding out what effects the microstructure of semi-solid Mg-Gd-Y-Zn-Zr alloy will result in under different remelting temperatures and holding times. Based on the results, if to raise the remelting temperature and to prolong the holding time, the size of solid grain will tend to expand and its spheroidization degree also begins to show improvement. In addition, the grain shows tendency of coarsening when the holding time increases. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6483

  6. Influence of temperature on oxidation behaviour of ZE41 magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, M.D., E-mail: mariadolores.lopez@urjc.e [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Munez, C.J. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Carboneras, M. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, 28040 Madrid (Spain); Rodrigo, P.; Escalera, M.D.; Otero, E. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain)

    2010-02-18

    The influence of temperature on the oxidation behaviour of commercial ZE41 magnesium alloy has been studied. Thermogravimetric tests were carried out to determine the oxidation kinetics in the 350-500 {sup o}C range. Morphology and growth of the oxidation films were analysed by Scanning Electronic Microscopy (SEM), Energy Dispersive X-Ray Spectrometry (EDS) and X-Ray Diffraction (XRD). It was found that the oxidation kinetics initially follow a parabolic law, following a linear law for higher exposure times. Results also showed that the protective nature of the oxide layer depends on the oxidation temperature. At temperatures in the range of 350-450 {sup o}C the ZE41 alloy is covered by a protective oxide layer, very thin and compact, whereas the oxide layer formed at 500 {sup o}C exhibits a non-protective nature, showing an 'oxide sponges' morphology.

  7. On the surface properties of biodegrading magnesium and its alloys: a survey and discussion

    Science.gov (United States)

    Wang, J. L.; Kirkland, N. T.; Chen, X. B.; Lyndon, J. A.; Birbilis, N.

    2016-03-01

    Biodegradable magnesium (Mg) alloys present exceptional promise as functional implants, as evidenced by the significant research effort associated with the topic in recent years. However, a salient point regarding the degradation of Mg and Mg-alloys—in any aqueous environment, including biological media—is the certain presence and accumulation of surface films, representing dissolution products. The corrosion of Mg does not require that bare metal surfaces be presented to the surrounding environment, it follows that any tissue or cells in the immediate vicinity of a Mg-based implant will therefore be in intimate contact with the dissolution products of Mg. To this end, the present work describes the typical Mg/Mg-alloy surface evolution during dissolution in biological media, and the associated factors which govern the morphology and control of surface films. This combines original research with review, finishing with prospects for further illumination.

  8. Corrosion resistance of Mg-Mn-Ce magnesium alloy modified by polymer plating

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Polymeric nano-film on the surface of Mg-Mn-Ce magnesium alloy was fabricated by polymer plating of 6-dihexylamino-1,3,5-triazine-2,4-dithiol monosodium(DHN)to improve its corrosion resistance.The electrochemical reaction process was analyzed by cyclic voltammetry and two obvious peaks of oxidation reaction were observed.The static contact angle of distilled water on polymer-plated surface can be up to 106.3°while on the blank surface it is 45.8°.Potentiodynamic polarization results show that the polymeric film Can increase the corrosion potential from-1.594 V VS SCE for blank to-0.382 V VS SCE.The results of electrochemical impedance spectroscopy indicate that the charge transfer resistances of blank and polymer-plated fabricating hydrophobic film on Mg-Mn-Ce alloy surface and improving its anti-corrosion property.

  9. Endothelialization of Novel Magnesium-Rare Earth Alloys with Fluoride and Collagen Coating

    Directory of Open Access Journals (Sweden)

    Nan Zhao

    2014-03-01

    Full Text Available Magnesium (Mg alloys are promising scaffolds for the next generation of cardiovascular stents because of their better biocompatibility and biodegradation compared to traditional metals. However, insufficient mechanical strength and high degradation rate are still the two main limitations for Mg materials. Hydrofluoric acid (HF treatment and collagen coating were used in this research to improve the endothelialization of two rare earth-based Mg alloys. Results demonstrated that a nanoporous film structure of fluoride with thickness of ~20 µm was formed on the Mg material surface, which improved the corrosion resistance. Primary human coronary artery endothelial cells (HCAECs had much better attachment, spreading, growth and proliferation (the process of endothelialization on HF-treated Mg materials compared to bare- or collagen-coated ones.

  10. Characterization of Ni–P coating on AZ91D magnesium alloy with surfactants and nano-additives

    Directory of Open Access Journals (Sweden)

    Mohammed Sahal

    2014-12-01

    Full Text Available Direct electroless Ni–P plating was done on AZ91D magnesium alloy by immersing magnesium AZ91D samples into a bath containing Nickel sulphate. The nucleation mechanism of Ni–P deposits on the AZ91D magnesium alloy in the presence of surfactants and nano-additives was studied by using SEM. The electroless Ni–P deposits were preferentially nucleated on the βMg17Al12 phase of AZ91D magnesium alloy. Ni–P coating was coated uniformly in the presence of surfactants. Effect of surfactant C-Tab with varying quantities was studied. Addition of surfactant C-Tab homogenized the Ni–P deposition on AZ91D magnesium alloy surface. The effect produced by surfactant C-Tab was maximum with minimum addition (1 g/l of surfactant C-Tab further increase in the surfactant C-Tab quantity did not brought much changes in morphology. Effect of surfactant SLS was studied using SEM. Surfactant SLS when incorporated in small amounts (6 g/l and 12 g/l only exerted a slight influence in Ni–P deposition on AZ91D alloy surface. However Ni–P deposition was more uniform and spread throughout the surface with the addition of SLS surfactant (18 g/l. Effect of nano additives Al2O3, ZnO, SiO2 were studied. Nano additive Al2O3 enhanced the deposition of Ni–P on AZ91D alloy when added in 0.6 g/l quantity. SiO2 addition also gave the same results. ZnO addition influenced the Ni–P deposition on AZ91D alloy positively. Ni–P surface coating was coated more uniform and spread throughout the surface with the addition of surfactants and nano-additives.

  11. A study on the boss forming process of AZ31 Mg alloy sheet

    Science.gov (United States)

    Park, Ji Eon; Kim, Hyung Rae; Ahn, Sang Ho; Chang, Young Won

    2009-06-01

    A series of boss forming tests has been carried out using an AZ31 Mg alloy sheet at 250 °C, 300 °C, and 350 °C with various lubrication conditions to obtain optimum process conditions. The Mg alloy sheet had a homogeneous distribution of very fine sized grains. Surface defects generated during boss forming process could be reduced by changing the friction conditions, as prescribed by FEM analysis using the DEFORM 2D program. The modified boss forming process, lubricating only on the front side, was found to be successful in manufacturing the boss without defects.

  12. Influence of Nickel Particle Reinforcement on Cyclic Fatigue and Final Fracture Behavior of a Magnesium Alloy Composite

    Directory of Open Access Journals (Sweden)

    Manoj Gupta

    2012-06-01

    Full Text Available The microstructure, tensile properties, cyclic stress amplitude fatigue response and final fracture behavior of a magnesium alloy, denoted as AZ31, discontinuously reinforced with nano-particulates of aluminum oxide and micron size nickel particles is presented and discussed. The tensile properties, high cycle fatigue and final fracture behavior of the discontinuously reinforced magnesium alloy are compared with the unreinforced counterpart (AZ31. The elastic modulus and yield strength of the dual particle reinforced magnesium alloy is marginally higher than of the unreinforced counterpart. However, the tensile strength of the composite is lower than the monolithic counterpart. The ductility quantified by elongation to failure over 0.5 inch (12.7 mm gage length of the test specimen showed minimal difference while the reduction in specimen cross-section area of the composite is higher than that of the monolithic counterpart. At the microscopic level, cyclic fatigue fractures of both the composite and the monolithic alloy clearly revealed features indicative of the occurrence of locally ductile and brittle mechanisms. Over the range of maximum stress and at two different load ratios the cyclic fatigue resistance of the magnesium alloy composite is superior to the monolithic counterpart. The mechanisms responsible for improved cyclic fatigue life and resultant fracture behavior of the composite microstructure are highlighted.

  13. Investigation of corrosion behaviour of magnesium alloy AM60B-F under pseudo-physiological conditions

    Energy Technology Data Exchange (ETDEWEB)

    Levesque, J.; Mantovani, D. [Dept. of Mining, Metallurgy and Materials Engineering, Laval Univ., PQ (Canada); Lab. for Biomaterials and Bioengineering, St-Francois-d' Assise Hospital, PQ (Canada); Dube, D.; Fiset, M. [Dept. of Mining, Metallurgy and Materials Engineering, Laval Univ., PQ (Canada)

    2003-07-01

    Endovascular stents have proven effective in treating coronary and peripheral arterial occlusions. All metallic materials currently used to make these devices are considered to be corrosion-resistant, and are therefore implanted on a long-term basis. Complications, however, have often been reported, such as restenosis and thrombosis. To reduce the risk of thrombus formation and restenosis, it would be useful to develop a new family of degradable stents. In fact, in most clinical cases, the occluded artery requires a stent only for a period of up to one year. Interesting candidate materials for manufacture of degradable stents include magnesium alloys, magnesium being an element that is essential to the organism and has a high electronegative potential. Success in using magnesium alloys for making endovascular devices is closely related to the properties of the selected alloy. Ideally, the alloy should degrade slowly, be ductile, be non-toxic, and corrode uniformly. Given these desired properties, we investigated the potential of magnesium alloys as degradable endovascular biomaterials. A test bench was designed and evaluated to reproduce the physiological conditions encountered in coronary arteries. (orig.)

  14. The Elastic Constants of the Single Crystal of the Mg-Zn-Zr-REM Alloy from the Data of the Elastic Anisotropy and the Texture of the Polycrystalline Sheet

    Directory of Open Access Journals (Sweden)

    S. V. San’kova

    2014-01-01

    Full Text Available The measuring of the constants of single-crystals requires the availability of crystals of relatively big size. In this paper the elastic constants of the single crystals of magnesium alloy with zinc, zirconium, and rare earth metals (REM were determined by means of the experimental anisotropy of Young’s modulus and integral characteristics of texture (ICT, which were found from pole figures. Using these constants the anisotropy of Young’s modulus of alloy sheet ZE10 was calculated. Deviation of calculated values from experimental values did not exceed 2%.

  15. Microstructure and creep behavior of magnesium-aluminum alloys containing alkaline and rare earth additions

    Science.gov (United States)

    Saddock, Nicholas David

    In the past few decades governmental regulation and consumer demands have lead the automotive companies towards vehicle lightweighting. Powertrain components offer significant potential for vehicle weight reductions. Recently, magnesium alloys have shown promise for use in powertrain applications where creep has been a limiting factor. These systems are Mg-Al based, with alkaline earth or rare earth additions. The solidification, microstructure, and creep behavior of a series of Mg-4 Al- 4 X:(Ca, Ce, La, and Sr) alloys and a commercially developed AXJ530 (Mg--5 Al--3 Ca--0.15 Sr) alloy (by wt%) have been investigated. The order of decreasing freezing range of the five alloys was: AX44, AXJ530, AJ44, ALa44 and ACe44. All alloys exhibited a solid solution primary alpha-Mg phase surrounded by an interdendritic region of Mg and intermetallic(s). The primary phase was composed of grains approximately an order of magnitude larger than the cellular structure. All alloys were permanent mold cast directly to creep specimens and AXJ530 specimens were provided in die-cast form. The tensile creep behavior was investigated at 175 °C for stresses ranging from 40 to 100 MPa. The order of decreasing creep resistance was: die-cast AXJ530 and permanent mold cast AXJ530, AX44, AJ44, ALa44 and ACe44. Grain size, solute concentration, and matrix precipitates were the most significant microstructural features that influenced the creep resistance. Decreases in grain size or increases in solute concentration, both Al and the ternary addition, lowered the minimum creep rate. In the Mg-Al-Ca alloys, finely distributed Al2Ca precipitates in the matrix also improved the creep resistance by a factor of ten over the same alloy with coarse precipitates. The morphology of the eutectic region was distinct between alloys but did not contribute to difference in creep behavior. Creep strain distribution for the Mg-Al-Ca alloys developed heterogeneously on the scale of the alpha-Mg grains. As

  16. Characterization of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, P. Bala, E-mail: bala.srinivasan@gkss.de [Institute of Materials Research, GKSS-Forschungszentrum Geesthacht GmbH, D-21502 Geesthacht (Germany); Liang, J.; Blawert, C.; Stoermer, M.; Dietzel, W. [Institute of Materials Research, GKSS-Forschungszentrum Geesthacht GmbH, D-21502 Geesthacht (Germany)

    2010-04-01

    An attempt was made to produce calcium containing plasma electrolytic oxidation (PEO) coatings on AM50 magnesium alloy using an alkaline electrolyte. This study was performed in three alkaline electrolytes containing calcium hydroxide and sodium phosphate with three different mass ratios viz., 1:2.5, 1:5 and 1:7.5. All the three coatings produced were found to contain Ca and P in appreciable amounts. The concentration of P was found to be higher in the coatings obtained in the electrolytes with higher concentration of phosphate ions. Even though all the three coatings were found to be constituted with magnesium oxide and magnesium phosphate phases, X-ray diffraction analyses revealed that the phase composition was influenced by the phosphate ion concentration/conductivity of the electrolyte. Further, the PEO coating obtained in the 1:7.5 ratio electrolyte was found to contain di-calcium phosphate (monetite) and calcium peroxide phases, which were absent in the other two coatings. Potentiodynamic polarization studies performed in 0.1 M NaCl solution showed that the coatings obtained from the 1:5 ratio electrolyte possessed a superior corrosion resistance, which is attributed to the combined effect of thickness, compactness and phase/chemical composition of this coating.

  17. Effects of processing parameters on microstructure of semi-solid magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In this paper, the effects of pouring temperature of magnesium melt, preheating temperature of the barrel of the screw mixer, and shear rate on the solidified microstructures of semi-solid slurry were investigated by a mechanical stirring semi-solid process. The appropriate processing parameters of slurry preparation were obtained, and the mold filling ability of semi-solid slurry for thin-walled casting was examined. Results indicate that the solid volume fraction of non-dendritic microstructure increases with a decrease in pouring temperature of magnesium melt and the barrel preheating temperature of the screw mixer. Also the grain size of primary α-phase is reduced. Furthermore, the solid volume fraction of semi-solid nondendritic structure decreases with an increase of shear rate. The fine and round granular microstructure with 30 ~50 μm in size of semi-solid AZ91D magnesium alloy was presented. Finally, a 1.0 mm thin-walled casting with a clear contour and good soundness was successfully made by semi-solid rheo-diecasting.

  18. Effects of processing parameters on microstructure of semi-solid magnesium alloy

    Directory of Open Access Journals (Sweden)

    Shusen WU

    2004-08-01

    Full Text Available In this paper, the effects of pouring temperature of magnesium melt, preheating temperature of the barrel of the screw mixer, and shear rate on the solidified microstructures of semi-solid slurry were investigated by a mechanical stirring semi-solid process. The appropriate processing parameters of slurry preparation were obtained, and the mold filling ability of semi-solid slurry for thin-walled casting was examined. Results indicate that the solid volume fraction of non-dendritic mi-crostructure increases with a decrease in pouring temperature of magnesium melt and the barrel preheating temperature of the screw mixer. Also the grain size of primary a-phase is reduced. Furthermore, the solid volume fraction of semi-solid non-dendritic structure decreases with an increase of shear rate. The fine and round granular microstructure with 30一50 Nm insize of semi-solid AZ91D magnesium alloy was presented. Finally, a 1.0 mm thin-walled casting with a clear contour and good soundness was successfully made by semi-solid rheo-diecasting.

  19. Effect of Sc and Zr on the in-plane anisotropy of Al-Mg-Mn alloy sheets

    Institute of Scientific and Technical Information of China (English)

    PENG Yongyi; YIN Zhimin; YANG Jin; DU Yuxuan

    2005-01-01

    The Al-Mg-Mn alloy sheets with and without trace Sc and Zr were investigated by means of tensile test, X-ray diffraction, optical microscope, and transmission electron microscope. The indexes of in-plane anisotropy (IIPA) of their tensile mechanical properties were calculated and their inverse pole figures were obtained by Harris method. The two alloy sheets have the same law of in-plane anisotropy and remarkable in-plane anisotropy of mechanical properties, and the IIPA of the alloy sheet with Sc and Zr is bigger than that of the alloy sheet without Sc and Zr. The relationships of the in-plane anisotropy and the anisotropy of the crystallographic texture were analyzed based on the model of monocrystal. It is the common action of the anisotropy of crystallography and microstructures that causes the in-plane anisotropy of their mechanical sotropy of the alloy sheet containing trace Sc and Zr.

  20. Biocorrosion behavior and cell viability of adhesive polymer coated magnesium based alloys for medical implants

    Science.gov (United States)

    Abdal-hay, Abdalla; Dewidar, Montasser; Lim, Jae Kyoo

    2012-11-01

    The present study was ultimately aimed to design novel adhesive biodegradable polymer, poly(vinyl acetate) (PVAc), coatings onto Mg based alloys by the dip-coating technique in order to control the degradation rate and enhance the biocompatibility of magnesium alloys. The influence of various solvents on PVAc surface topography and their protection of Mg alloys were dramatically studied in vitro. Electrochemical polarization, degradation, and PVAc film cytocompatibility were also tested. Our results showed that the solvent had a significant effect on coating quality. PVAc/dichloromethane solution showed a porous structure and solution concentration could control the porous size. The coatings prepared using tetrahydrofuran and dimethylformamide solvents are exceptional in their ability to generate porous morphology even at low polymer concentration. In general, the corrosion performance appears to be different on different PVAc-solvent system. Immersion tests illustrated that the porous morphology on PVAc stabilized corrosion rates. A uniform corrosion attack in artificial simulation body fluid was also exhibited. The cytocompatibility of osteoblast cells (MC3T3) revealed high adherence, proliferation, and survival on the porous structure of PVAc coated Mg alloy, which was not observed for the uncoated samples. This novel PVAc coating is a promising candidate for biodegradable implant materials, which might widen the use of Mg based implants.