WorldWideScience

Sample records for macroscale hydrology model

  1. Macroscale hydrologic modeling of ecologically relevant flow metrics

    Science.gov (United States)

    Seth J. Wenger; Charles H. Luce; Alan F. Hamlet; Daniel J. Isaak; Helen M. Neville

    2010-01-01

    Stream hydrology strongly affects the structure of aquatic communities. Changes to air temperature and precipitation driven by increased greenhouse gas concentrations are shifting timing and volume of streamflows potentially affecting these communities. The variable infiltration capacity (VIC) macroscale hydrologic model has been employed at regional scales to describe...

  2. A new global river network database for macroscale hydrologic modeling

    Science.gov (United States)

    Wu, Huan; Kimball, John S.; Li, Hongyi; Huang, Maoyi; Leung, L. Ruby; Adler, Robert F.

    2012-09-01

    Coarse-resolution (upscaled) river networks are critical inputs for runoff routing in macroscale hydrologic models. Recently, Wu et al. (2011) developed a hierarchical dominant river tracing (DRT) algorithm for automated extraction and spatial upscaling of river networks using fine-scale hydrography inputs. We applied the DRT algorithms using combined HydroSHEDS and HYDRO1k global fine-scale hydrography inputs and produced a new series of upscaled global river network data at multiple (1/16° to 2°) spatial resolutions. The new upscaled results are internally consistent and congruent with the baseline fine-scale inputs and should facilitate improved regional to global scale hydrologic simulations.

  3. A MACRO-SCALE SEMI-DISTRIBUTED HYDROLOGICAL MODEL AND APPLICATION TO THE DATONG RIVER VALLEY

    Institute of Scientific and Technical Information of China (English)

    YANG Zhi-feng; LIU Lu-liu; SHEN Zhen-yao; GORDON G. Huang

    2005-01-01

    A daily distributed hydrological model was developed using routine hydro-meteorological data on the basis of the raster DEM and land cover data.Then the model was used to model daily runoff of the Datong River Valley located in the upper catchment of the Yellow River Basin.The runoff comprises surface flow, subsurface flow and ground water flow.Evapotranspiration comprises canopy evaporation, snow sublimation and soil evapotranspiration.The infiltration to the soil was estimated with improved Green-Ampt model, and the potential evapotranspiration is estimated with Morton CRAE method, which only needs the routine meteorological data.Simulation results and the comparison with semi-distributed SLURP hydrological model show that the structure of the model presented herein is reasonable.

  4. Towards improved parameterization of a macroscale hydrologic model in a discontinuous permafrost boreal forest ecosystem

    Directory of Open Access Journals (Sweden)

    A. Endalamaw

    2017-09-01

    Full Text Available Modeling hydrological processes in the Alaskan sub-arctic is challenging because of the extreme spatial heterogeneity in soil properties and vegetation communities. Nevertheless, modeling and predicting hydrological processes is critical in this region due to its vulnerability to the effects of climate change. Coarse-spatial-resolution datasets used in land surface modeling pose a new challenge in simulating the spatially distributed and basin-integrated processes since these datasets do not adequately represent the small-scale hydrological, thermal, and ecological heterogeneity. The goal of this study is to improve the prediction capacity of mesoscale to large-scale hydrological models by introducing a small-scale parameterization scheme, which better represents the spatial heterogeneity of soil properties and vegetation cover in the Alaskan sub-arctic. The small-scale parameterization schemes are derived from observations and a sub-grid parameterization method in the two contrasting sub-basins of the Caribou Poker Creek Research Watershed (CPCRW in Interior Alaska: one nearly permafrost-free (LowP sub-basin and one permafrost-dominated (HighP sub-basin. The sub-grid parameterization method used in the small-scale parameterization scheme is derived from the watershed topography. We found that observed soil thermal and hydraulic properties – including the distribution of permafrost and vegetation cover heterogeneity – are better represented in the sub-grid parameterization method than the coarse-resolution datasets. Parameters derived from the coarse-resolution datasets and from the sub-grid parameterization method are implemented into the variable infiltration capacity (VIC mesoscale hydrological model to simulate runoff, evapotranspiration (ET, and soil moisture in the two sub-basins of the CPCRW. Simulated hydrographs based on the small-scale parameterization capture most of the peak and low flows, with similar accuracy in both sub

  5. Towards improved parameterization of a macroscale hydrologic model in a discontinuous permafrost boreal forest ecosystem

    Science.gov (United States)

    Endalamaw, Abraham; Bolton, W. Robert; Young-Robertson, Jessica M.; Morton, Don; Hinzman, Larry; Nijssen, Bart

    2017-09-01

    Modeling hydrological processes in the Alaskan sub-arctic is challenging because of the extreme spatial heterogeneity in soil properties and vegetation communities. Nevertheless, modeling and predicting hydrological processes is critical in this region due to its vulnerability to the effects of climate change. Coarse-spatial-resolution datasets used in land surface modeling pose a new challenge in simulating the spatially distributed and basin-integrated processes since these datasets do not adequately represent the small-scale hydrological, thermal, and ecological heterogeneity. The goal of this study is to improve the prediction capacity of mesoscale to large-scale hydrological models by introducing a small-scale parameterization scheme, which better represents the spatial heterogeneity of soil properties and vegetation cover in the Alaskan sub-arctic. The small-scale parameterization schemes are derived from observations and a sub-grid parameterization method in the two contrasting sub-basins of the Caribou Poker Creek Research Watershed (CPCRW) in Interior Alaska: one nearly permafrost-free (LowP) sub-basin and one permafrost-dominated (HighP) sub-basin. The sub-grid parameterization method used in the small-scale parameterization scheme is derived from the watershed topography. We found that observed soil thermal and hydraulic properties - including the distribution of permafrost and vegetation cover heterogeneity - are better represented in the sub-grid parameterization method than the coarse-resolution datasets. Parameters derived from the coarse-resolution datasets and from the sub-grid parameterization method are implemented into the variable infiltration capacity (VIC) mesoscale hydrological model to simulate runoff, evapotranspiration (ET), and soil moisture in the two sub-basins of the CPCRW. Simulated hydrographs based on the small-scale parameterization capture most of the peak and low flows, with similar accuracy in both sub-basins, compared to

  6. Development of regional parameter estimation equations for a macroscale hydrologic model

    Science.gov (United States)

    Abdulla, Fayez A.; Lettenmaier, Dennis P.

    1997-10-01

    A methodology for developing regional parameter estimation equations, designed for application to continental scale river basins, is described. The approach, which is applied to the two-layer Variable Infiltration Capacity (VIC-2L) land surface hydrologic model, uses a set of 34 unregulated calibration or "training" catchments (drainage areas 10 2-10 4 km 2) distributed throughout the Arkansas-Red River basin of the south central U.S. For each of these catchments, parameters were determined by: a) prior estimation of two of the model parameters (saturated hydraulic conductivity and pore size distribution index) from the U.S. Soil Conservation Service State Soil Geographic Data Base (STATSGO) data base; and b) estimation of the remaining seven parameters via a search procedure that minimizes the sum of squares of differences between predicted and observed streamflow. The catchment parameters were then related to 11 ancillary distributed land surface characteristics extracted from STATSGO, and 17 variables derived from station meteorological data. The seven regression equations explained from 54 to 76% of the variance of the parameters. The most frequently occurring ancillary variables were the average permeability, saturated hydraulic conductivity, and SCS hydrologic Group B (typically soils with moderately high infiltration rates) fraction derived from STATSGO, and the average temperature and standard deviation of fall precipitation. The method was tested by comparing simulations using the regional (regression equation) parameters for six unregulated catchments not in the parameter estimation set. The model performance using the regional parameters was quite good for most of the calibration and validation catchments, which were humid and semi-humid. The model did not perform as well for the smaller number of arid to semi-arid catchments.

  7. Impact of climate change on flood characteristics in Brahmaputra basin using a macro-scale distributed hydrological model

    Indian Academy of Sciences (India)

    Shyamal Ghosh; Subashisa Dutta

    2012-06-01

    Being the highest specific discharge river system in the world, the Brahmaputra river experiences a number of long-duration flood waves during the monsoon season annually. In order to assess the flood characteristics at the basin and tributary scales, a physically based macro-scale distributed hydrological model (DHM) has been calibrated and validated for 9 wet years. The model performance has been evaluated in terms of prediction of the flood characteristics such as peak discharge, flood duration, arrival time of flood wave, timing of the peak flow and number of flood waves per season. Future changes in the flood wave characteristics of the basin have been evaluated using the validated model with bias-corrected future-projected meteorological scenario from a regional climate model (RCM). Likelihood analysis of the simulated flow time series reveals that significant increase in both peak discharge and flood duration is expected for both the pre-monsoonal and monsoonal seasons in the basin, but the number of flood waves per season would be reduced. Under the projected climate change scenario, it is expected that there will be more catastrophic floods in the basin.

  8. Monitoring of frozen soil hydrology in macro-scale in the Qinghai-Xizang Plateau

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Monitoring of frozen soil hydrology in macro-scale was performed by Chinese and Japanese scientists from 1997 to 1998. Quality measured data were obtained. Measured data on soil moisture and temperature are preliminarily analyzed. Based on profiles of soil temperature and moisture in individual measured sites, intra-annual freezing and melting process of soil is discussed. Maximum frozen and thawed depths and frozen days in various depths are estimated. The work emphasized the spatial distribution on soil temperature and moisture in macro-scale and the effect of topography on conditions of soil water and heat.

  9. Solicited abstract: Global hydrological modeling and models

    Science.gov (United States)

    Xu, Chong-Yu

    2010-05-01

    The origins of rainfall-runoff modeling in the broad sense can be found in the middle of the 19th century arising in response to three types of engineering problems: (1) urban sewer design, (2) land reclamation drainage systems design, and (3) reservoir spillway design. Since then numerous empirical, conceptual and physically-based models are developed including event based models using unit hydrograph concept, Nash's linear reservoir models, HBV model, TOPMODEL, SHE model, etc. From the late 1980s, the evolution of global and continental-scale hydrology has placed new demands on hydrologic modellers. The macro-scale hydrological (global and regional scale) models were developed on the basis of the following motivations (Arenll, 1999). First, for a variety of operational and planning purposes, water resource managers responsible for large regions need to estimate the spatial variability of resources over large areas, at a spatial resolution finer than can be provided by observed data alone. Second, hydrologists and water managers are interested in the effects of land-use and climate variability and change over a large geographic domain. Third, there is an increasing need of using hydrologic models as a base to estimate point and non-point sources of pollution loading to streams. Fourth, hydrologists and atmospheric modellers have perceived weaknesses in the representation of hydrological processes in regional and global climate models, and developed global hydrological models to overcome the weaknesses of global climate models. Considerable progress in the development and application of global hydrological models has been achieved to date, however, large uncertainties still exist considering the model structure including large scale flow routing, parameterization, input data, etc. This presentation will focus on the global hydrological models, and the discussion includes (1) types of global hydrological models, (2) procedure of global hydrological model development

  10. Automated upscaling of river networks for macroscale hydrological modeling

    Science.gov (United States)

    Wu, Huan; Kimball, John S.; Mantua, Nate; Stanford, Jack

    2011-03-01

    We developed a hierarchical dominant river tracing (DRT) algorithm for automated extraction and spatial upscaling of basin flow directions and river networks using fine-scale hydrography inputs (e.g., flow direction, river networks, and flow accumulation). In contrast with previous upscaling methods, the DRT algorithm utilizes information on global and local drainage patterns from baseline fine-scale hydrography to determine upscaled flow directions and other critical variables including upscaled basin area, basin shape, and river lengths. The DRT algorithm preserves the original baseline hierarchical drainage structure by tracing each entire flow path from headwater to river mouth at fine scale while prioritizing successively higher order basins and rivers for tracing. We applied the algorithm to produce a series of global hydrography data sets from 1/16° to 2° spatial scales in two geographic projections (WGS84 and Lambert azimuthal equal area). The DRT results were evaluated against other alternative upscaling methods and hydrography data sets for continental U.S. and global domains. These results show favorable DRT upscaling performance in preserving baseline fine-scale river network information including: (1) improved, automated extraction of flow directions and river networks at any spatial scale without the need for manual correction; (2) consistency of river network, basin shape, basin area, river length, and basin internal drainage structure between upscaled and baseline fine-scale hydrography; and (3) performance largely independent of spatial scale, geographic region, and projection. The results of this study include an initial set of DRT upscaled global hydrography maps derived from HYDRO1K baseline fine-scale hydrography inputs; these digital data are available online for public access at ftp://ftp.ntsg.umt.edu/pub/data/DRT/.

  11. Glaciers and small ice caps in the macro-scale hydrological cycle - an assessment of present conditions and future changes

    Science.gov (United States)

    Lammers, Richard; Hock, Regine; Prusevich, Alexander; Bliss, Andrew; Radic, Valentina; Glidden, Stanley; Grogan, Danielle; Frolking, Steve

    2014-05-01

    Glacier and small ice cap melt water contributions to the global hydrologic cycle are an important component of human water supply and for sea level rise. This melt water is used in many arid and semi-arid parts of the world for direct human consumption as well as indirect consumption by irrigation for crops, serving as frozen reservoirs of water that supplement runoff during warm and dry periods of summer when it is needed the most. Additionally, this melt water reaching the oceans represents a direct input to sea level rise and therefore accurate estimates of this contribution have profound economic and geopolitical implications. It has been demonstrated that, on the scale of glacierized river catchments, land surface hydrological models can successfully simulate glacier contribution to streamflow. However, at global scales, the implementation of glacier melt in hydrological models has been rudimentary or non-existent. In this study, a global glacier mass balance model is coupled with the University of New Hampshire Water Balance/Transport Model (WBM) to assess recent and projected future glacier contributions to the hydrological cycle over the global land surface (excluding the ice sheets of Greenland and Antarctica). For instance, results of WBM simulations indicate that seasonal glacier melt water in many arid climate watersheds comprises 40 % or more of their discharge. Implicitly coupled glacier and WBM models compute monthly glacier mass changes and resulting runoff at the glacier terminus for each individual glacier from the globally complete Randolph Glacier Inventory including over 200 000 glaciers. The time series of glacier runoff is aggregated over each hydrological modeling unit and delivered to the hydrological model for routing downstream and mixing with non-glacial contribution of runoff to each drainage basin outlet. WBM tracks and uses glacial and non-glacial components of the in-stream water for filling reservoirs, transfers of water between

  12. Perspective on Continuum Modeling of Mesoscale/ Macroscale Phenomena

    Science.gov (United States)

    Bammann, D. J.

    The attempt to model or predict the inelastic response or permanent deformation and failure observed in metals dates back over 180 years. Various descriptions of the post elastic response of metals have been proposed from the fields of physics, materials science (metallurgy), engineering, mechanics, and applied mathematics. The communication between these fields has improved and many of the modeling efforts today involve concepts from most or all of these fields. Early engineering description of post yield response treated the material as perfectly plastic — the material continues to deform with zero additional increase in load. These models became the basis of the mathematical theory of plasticity and were extended to account for hardening, unloading, and directional hardening. In contradistinction, rheological models treated the finite deformation of a solid similar to the deformation of a viscous fluid. In many cases of large deformation, rheological models have provided both adequate and accurate information about the deformed shape of a metal during many manufacturing processes. The treatment of geometric defects in solid bodies initiated within the mathematical theory of elasticity, the dislocation, introduced as an incompatible "cut" in a continuum body. This resulted in a very large body of literature devoted to the linear elastic study of dislocations, dislocation structures, and their interactions, and has provided essential information in the understanding of the "state" of a deformed material.

  13. Numerical modeling of macroscale brittle rock crushing during impacts

    Energy Technology Data Exchange (ETDEWEB)

    Badr, Salah A.; Abdelhaffez, Gamal S. [King Abdulaziz Univ., Jeddah (Saudi Arabia)

    2014-02-01

    Several machines, such as crushers use the physical effect of compression to cause fragmentation 'crushing' of brittle rocks. As a consequence of the complex fragmentation process, crushers are still sized by empirical approaches. This paper present the results of a numerical study to understand some aspects of rock crushing phenomenon in terms of energy consumption. The study uses the discrete element approach of PFC2D code to simulate a stamp mill. The stamp mill has a simple crushing mechanism of a fixed kinetic energy delivered by a rigid ram impact. A single rock fragment crushing process dependent on the number of stamp mill ram blows is numerically examined. Both amount and type of energy generated by a ram blow are monitored besides the type of fractures generated. The model results indicate that the ram impact energy is mainly consumed in form of friction energy (up to 61 %) while strain energy stays at about 5 % of delivered energy. The energy consumed by crushing the rock represents only 32 % to 45 % of stamp mill energy and tends to decrease as the number of impacts increases. The rock fragmented matrix tends to convert into more friction energy with reduced number of new fractures as number of blows increase. The fragmentation caused by tensile is more often compared to those caused by shear, this behaviour increased with increasing number of ram blows. (orig.)

  14. Hydrological modelling in forested systems

    Science.gov (United States)

    This chapter provides a brief overview of forest hydrology modelling approaches for answering important global research and management questions. Many hundreds of hydrological models have been applied globally across multiple decades to represent and predict forest hydrological p...

  15. Characteristics of soil water retention curve at macro-scale

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Scale adaptable hydrological models have attracted more and more attentions in the hydrological modeling research community, and the constitutive relationship at the macro-scale is one of the most important issues, upon which there are not enough research activities yet. Taking the constitutive relationships of soil water movement--soil water retention curve (SWRC) as an example, this study extends the definition of SWRC at the micro-scale to that at the macro-scale, and aided by Monte Carlo method we demonstrate that soil property and the spatial distribution of soil moisture will affect the features of SWRC greatly. Furthermore, we assume that the spatial distribution of soil moisture is the result of self-organization of climate, soil, ground water and soil water movement under the specific boundary conditions, and we also carry out numerical experiments of soil water movement at the vertical direction in order to explore the relationship between SWRC at the macro-scale and the combinations of climate, soil, and groundwater. The results show that SWRCs at the macro-scale and micro-scale presents totally different features, e.g., the essential hysteresis phenomenon which is exaggerated with increasing aridity index and rising groundwater table. Soil property plays an important role in the shape of SWRC which will even lead to a rectangular shape under drier conditions, and power function form of SWRC widely adopted in hydrological model might be revised for most situations at the macro-scale.

  16. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    Recent advances in integrated hydrological and soil-vegetation-atmosphere transfer (SVAT) modelling have led to improved water resource management practices, greater crop production, and better flood forecasting systems. However, uncertainty is inherent in all numerical models ultimately leading...... and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface...... hydrological and tested by assimilating synthetic hydraulic head observations in a catchment in Denmark. Assimilation led to a substantial reduction of model prediction error, and better model forecasts. Also, a new assimilation scheme is developed to downscale and bias-correct coarse satellite derived soil...

  17. Direct Numerical Simulations in Solid Mechanics for Quantifying the Macroscale Effects of Microstructure and Material Model-Form Error

    Science.gov (United States)

    Bishop, Joseph E.; Emery, John M.; Battaile, Corbett C.; Littlewood, David J.; Baines, Andrew J.

    2016-05-01

    Two fundamental approximations in macroscale solid-mechanics modeling are (1) the assumption of scale separation in homogenization theory and (2) the use of a macroscopic plasticity material model that represents, in a mean sense, the multitude of inelastic processes occurring at the microscale. With the goal of quantifying the errors induced by these approximations on engineering quantities of interest, we perform a set of direct numerical simulations (DNS) in which polycrystalline microstructures are embedded throughout a macroscale structure. The largest simulations model over 50,000 grains. The microstructure is idealized using a randomly close-packed Voronoi tessellation in which each polyhedral Voronoi cell represents a grain. An face centered cubic crystal-plasticity model is used to model the mechanical response of each grain. The overall grain structure is equiaxed, and each grain is randomly oriented with no overall texture. The detailed results from the DNS simulations are compared to results obtained from conventional macroscale simulations that use homogeneous isotropic plasticity models. The macroscale plasticity models are calibrated using a representative volume element of the idealized microstructure. Ultimately, we envision that DNS modeling will be used to gain new insights into the mechanics of material deformation and failure.

  18. Retrospect and prospect of watershed hydrological model

    Institute of Scientific and Technical Information of China (English)

    B.CHEN; Z.F.YANG; 等

    2001-01-01

    A brief review is presented of the development of watershed hydrological models,COnventional Hydrological Model,Grey Hydrological Model,Digital Hydrological Model and Intelligent Hydrological Model are analyzed.The Frameworks of Fuzzy Cognitive Hydrological Model and Integrated Digital Watershed Hydrological Model are presented.

  19. netherland hydrological modeling instrument

    Science.gov (United States)

    Hoogewoud, J. C.; de Lange, W. J.; Veldhuizen, A.; Prinsen, G.

    2012-04-01

    Netherlands Hydrological Modeling Instrument A decision support system for water basin management. J.C. Hoogewoud , W.J. de Lange ,A. Veldhuizen , G. Prinsen , The Netherlands Hydrological modeling Instrument (NHI) is the center point of a framework of models, to coherently model the hydrological system and the multitude of functions it supports. Dutch hydrological institutes Deltares, Alterra, Netherlands Environmental Assessment Agency, RWS Waterdienst, STOWA and Vewin are cooperating in enhancing the NHI for adequate decision support. The instrument is used by three different ministries involved in national water policy matters, for instance the WFD, drought management, manure policy and climate change issues. The basis of the modeling instrument is a state-of-the-art on-line coupling of the groundwater system (MODFLOW), the unsaturated zone (metaSWAP) and the surface water system (MOZART-DM). It brings together hydro(geo)logical processes from the column to the basin scale, ranging from 250x250m plots to the river Rhine and includes salt water flow. The NHI is validated with an eight year run (1998-2006) with dry and wet periods. For this run different parts of the hydrology have been compared with measurements. For instance, water demands in dry periods (e.g. for irrigation), discharges at outlets, groundwater levels and evaporation. A validation alone is not enough to get support from stakeholders. Involvement from stakeholders in the modeling process is needed. There fore to gain sufficient support and trust in the instrument on different (policy) levels a couple of actions have been taken: 1. a transparent evaluation of modeling-results has been set up 2. an extensive program is running to cooperate with regional waterboards and suppliers of drinking water in improving the NHI 3. sharing (hydrological) data via newly setup Modeling Database for local and national models 4. Enhancing the NHI with "local" information. The NHI is and has been used for many

  20. Proposal of a Novel Approach to Developing Material Models for Micro-scale Composites Based on Testing and Modeling of Macro-scale Composites

    Energy Technology Data Exchange (ETDEWEB)

    Siranosian, Antranik Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Schembri, Philip Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Luscher, Darby Jon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-20

    The Los Alamos National Laboratory's Weapon Systems Engineering division's Advanced Engineering Analysis group employs material constitutive models of composites for use in simulations of components and assemblies of interest. Experimental characterization, modeling and prediction of the macro-scale (i.e. continuum) behaviors of these composite materials is generally difficult because they exhibit nonlinear behaviors on the meso- (e.g. micro-) and macro-scales. Furthermore, it can be difficult to measure and model the mechanical responses of the individual constituents and constituent interactions in the composites of interest. Current efforts to model such composite materials rely on semi-empirical models in which meso-scale properties are inferred from continuum level testing and modeling. The proposed approach involves removing the difficulties of interrogating and characterizing micro-scale behaviors by scaling-up the problem to work with macro-scale composites, with the intention of developing testing and modeling capabilities that will be applicable to the mesoscale. This approach assumes that the physical mechanisms governing the responses of the composites on the meso-scale are reproducible on the macro-scale. Working on the macro-scale simplifies the quantification of composite constituents and constituent interactions so that efforts can be focused on developing material models and the testing techniques needed for calibration and validation. Other benefits to working with macro-scale composites include the ability to engineer and manufacture—potentially using additive manufacturing techniques—composites that will support the application of advanced measurement techniques such as digital volume correlation and three-dimensional computed tomography imaging, which would aid in observing and quantifying complex behaviors that are exhibited in the macro-scale composites of interest. Ultimately, the goal of this new approach is to develop a meso

  1. From micro-scale 3D simulations to macro-scale model of periodic porous media

    Science.gov (United States)

    Crevacore, Eleonora; Tosco, Tiziana; Marchisio, Daniele; Sethi, Rajandrea; Messina, Francesca

    2015-04-01

    In environmental engineering, the transport of colloidal suspensions in porous media is studied to understand the fate of potentially harmful nano-particles and to design new remediation technologies. In this perspective, averaging techniques applied to micro-scale numerical simulations are a powerful tool to extrapolate accurate macro-scale models. Choosing two simplified packing configurations of soil grains and starting from a single elementary cell (module), it is possible to take advantage of the periodicity of the structures to reduce the computation costs of full 3D simulations. Steady-state flow simulations for incompressible fluid in laminar regime are implemented. Transport simulations are based on the pore-scale advection-diffusion equation, that can be enriched introducing also the Stokes velocity (to consider the gravity effect) and the interception mechanism. Simulations are carried on a domain composed of several elementary modules, that serve as control volumes in a finite volume method for the macro-scale method. The periodicity of the medium involves the periodicity of the flow field and this will be of great importance during the up-scaling procedure, allowing relevant simplifications. Micro-scale numerical data are treated in order to compute the mean concentration (volume and area averages) and fluxes on each module. The simulation results are used to compare the micro-scale averaged equation to the integral form of the macroscopic one, making a distinction between those terms that could be computed exactly and those for which a closure in needed. Of particular interest it is the investigation of the origin of macro-scale terms such as the dispersion and tortuosity, trying to describe them with micro-scale known quantities. Traditionally, to study the colloidal transport many simplifications are introduced, such those concerning ultra-simplified geometry that usually account for a single collector. Gradual removal of such hypothesis leads to a

  2. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    to imperfect model forecasts. It remains a crucial challenge to account for system uncertainty, so as to provide model outputs accompanied by a quantified confidence interval. Properly characterizing and reducing uncertainty opens-up the opportunity for risk-based decision-making and more effective emergency...... and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface...... temperature are explored in a multi-objective calibration experiment to optimize the parameters in a SVAT model in the Sahel. The two satellite derived variables were effective at constraining most land-surface and soil parameters. A data assimilation framework is developed and implemented with an integrated...

  3. PATHS groundwater hydrologic model

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, R.W.; Schur, J.A.

    1980-04-01

    A preliminary evaluation capability for two-dimensional groundwater pollution problems was developed as part of the Transport Modeling Task for the Waste Isolation Safety Assessment Program (WISAP). Our approach was to use the data limitations as a guide in setting the level of modeling detail. PATHS Groundwater Hydrologic Model is the first level (simplest) idealized hybrid analytical/numerical model for two-dimensional, saturated groundwater flow and single component transport; homogeneous geology. This document consists of the description of the PATHS groundwater hydrologic model. The preliminary evaluation capability prepared for WISAP, including the enhancements that were made because of the authors' experience using the earlier capability is described. Appendixes A through D supplement the report as follows: complete derivations of the background equations are provided in Appendix A. Appendix B is a comprehensive set of instructions for users of PATHS. It is written for users who have little or no experience with computers. Appendix C is for the programmer. It contains information on how input parameters are passed between programs in the system. It also contains program listings and test case listing. Appendix D is a definition of terms.

  4. Complexity regularized hydrological model selection

    NARCIS (Netherlands)

    Pande, S.; Arkesteijn, L.; Bastidas, L.A.

    2014-01-01

    This paper uses a recently proposed measure of hydrological model complexity in a model selection exercise. It demonstrates that a robust hydrological model is selected by penalizing model complexity while maximizing a model performance measure. This especially holds when limited data is available.

  5. Complexity regularized hydrological model selection

    NARCIS (Netherlands)

    Pande, S.; Arkesteijn, L.; Bastidas, L.A.

    2014-01-01

    This paper uses a recently proposed measure of hydrological model complexity in a model selection exercise. It demonstrates that a robust hydrological model is selected by penalizing model complexity while maximizing a model performance measure. This especially holds when limited data is available.

  6. Uncertainty in hydrological change modelling

    DEFF Research Database (Denmark)

    Seaby, Lauren Paige

    Hydrological change modelling methodologies generally use climate models outputs to force hydrological simulations under changed conditions. There are nested sources of uncertainty throughout this methodology, including choice of climate model and subsequent bias correction methods. This Ph.......D. study evaluates the uncertainty of the impact of climate change in hydrological simulations given multiple climate models and bias correction methods of varying complexity. Three distribution based scaling methods (DBS) were developed and benchmarked against a more simplistic and commonly used delta...... change (DC) approach. These climate model projections were then used to force hydrological simulations under climate change for the island Sjælland in Denmark to analyse the contribution of different climate models and bias correction methods to overall uncertainty in the hydrological change modelling...

  7. Data assimilation in hydrological modelling

    DEFF Research Database (Denmark)

    Drecourt, Jean-Philippe

    Data assimilation is an invaluable tool in hydrological modelling as it allows to efficiently combine scarce data with a numerical model to obtain improved model predictions. In addition, data assimilation also provides an uncertainty analysis of the predictions made by the hydrological model...... with model non-linearities and biased errors. A literature review analyzes the most popular techniques and their application in hydrological modelling. Since bias is an important problem in groundwater modelling, two bias aware Kalman filters have been implemented and compared using an artificial test case...

  8. Hydrological modeling in forested systems

    Science.gov (United States)

    H.E. Golden; G.R. Evenson; S. Tian; Devendra Amatya; Ge Sun

    2015-01-01

    Characterizing and quantifying interactions among components of the forest hydrological cycle is complex and usually requires a combination of field monitoring and modelling approaches (Weiler and McDonnell, 2004; National Research Council, 2008). Models are important tools for testing hypotheses, understanding hydrological processes and synthesizing experimental data...

  9. Stochastic Modelling of Hydrologic Systems

    DEFF Research Database (Denmark)

    Jonsdottir, Harpa

    2007-01-01

    In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains an introduct......In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains...... an introduction and an overview of the papers published. Then an introduction to basic concepts in hydrology along with a description of hydrological data is given. Finally an introduction to stochastic modelling is given. The second part contains the research papers. In the research papers the stochastic methods...

  10. Using Discrete Event Simulation for Programming Model Exploration at Extreme-Scale: Macroscale Components for the Structural Simulation Toolkit (SST).

    Energy Technology Data Exchange (ETDEWEB)

    Wilke, Jeremiah J [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Kenny, Joseph P. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2015-02-01

    Discrete event simulation provides a powerful mechanism for designing and testing new extreme- scale programming models for high-performance computing. Rather than debug, run, and wait for results on an actual system, design can first iterate through a simulator. This is particularly useful when test beds cannot be used, i.e. to explore hardware or scales that do not yet exist or are inaccessible. Here we detail the macroscale components of the structural simulation toolkit (SST). Instead of depending on trace replay or state machines, the simulator is architected to execute real code on real software stacks. Our particular user-space threading framework allows massive scales to be simulated even on small clusters. The link between the discrete event core and the threading framework allows interesting performance metrics like call graphs to be collected from a simulated run. Performance analysis via simulation can thus become an important phase in extreme-scale programming model and runtime system design via the SST macroscale components.

  11. Data assimilation in hydrological modelling

    DEFF Research Database (Denmark)

    Drecourt, Jean-Philippe

    Data assimilation is an invaluable tool in hydrological modelling as it allows to efficiently combine scarce data with a numerical model to obtain improved model predictions. In addition, data assimilation also provides an uncertainty analysis of the predictions made by the hydrological model...... with model non-linearities and biased errors. A literature review analyzes the most popular techniques and their application in hydrological modelling. Since bias is an important problem in groundwater modelling, two bias aware Kalman filters have been implemented and compared using an artificial test case....... In this thesis, the Kalman filter is used for data assimilation with a focus on groundwater modelling. However the developed techniques are general and can be applied also in other modelling domains. Modelling involves conceptualization of the processes of Nature. Data assimilation provides a way to deal...

  12. Integrated climate and hydrology modelling

    DEFF Research Database (Denmark)

    Larsen, Morten Andreas Dahl

    global warming and increased frequency of extreme events. The skill in developing projections of both the present and future climate depends essentially on the ability to numerically simulate the processes of atmospheric circulation, hydrology, energy and ecology. Previous modelling efforts of climate...... and hydrology have used each model component in an offline mode where the models are run in sequential steps and one model serves as a boundary condition or data input source to the other. Within recent years a new field of research has emerged where efforts have been made to dynamically couple existing climate...... and hydrology models to more directly include the interaction between the atmosphere and the land surface. The present PhD study is motivated by an ambition of developing and applying a modelling tool capable of including the interaction and feedback mechanisms between the atmosphere and the land surface...

  13. Model Calibration in Watershed Hydrology

    Science.gov (United States)

    Yilmaz, Koray K.; Vrugt, Jasper A.; Gupta, Hoshin V.; Sorooshian, Soroosh

    2009-01-01

    Hydrologic models use relatively simple mathematical equations to conceptualize and aggregate the complex, spatially distributed, and highly interrelated water, energy, and vegetation processes in a watershed. A consequence of process aggregation is that the model parameters often do not represent directly measurable entities and must, therefore, be estimated using measurements of the system inputs and outputs. During this process, known as model calibration, the parameters are adjusted so that the behavior of the model approximates, as closely and consistently as possible, the observed response of the hydrologic system over some historical period of time. This Chapter reviews the current state-of-the-art of model calibration in watershed hydrology with special emphasis on our own contributions in the last few decades. We discuss the historical background that has led to current perspectives, and review different approaches for manual and automatic single- and multi-objective parameter estimation. In particular, we highlight the recent developments in the calibration of distributed hydrologic models using parameter dimensionality reduction sampling, parameter regularization and parallel computing.

  14. Integrated climate and hydrology modelling

    DEFF Research Database (Denmark)

    Larsen, Morten Andreas Dahl

    global warming and increased frequency of extreme events. The skill in developing projections of both the present and future climate depends essentially on the ability to numerically simulate the processes of atmospheric circulation, hydrology, energy and ecology. Previous modelling efforts of climate...... and hydrology models to more directly include the interaction between the atmosphere and the land surface. The present PhD study is motivated by an ambition of developing and applying a modelling tool capable of including the interaction and feedback mechanisms between the atmosphere and the land surface...... to the LSM in HIRHAM. A wider range of processes are included at the land surface, subsurface flow is distributed in three dimensions and the temporal and spatial resolution is higher. Secondly, the feedback mechanisms of e.g. soil moisture and recipitation between the two models are included...

  15. Hydrological modelling in forested systems | Science ...

    Science.gov (United States)

    This chapter provides a brief overview of forest hydrology modelling approaches for answering important global research and management questions. Many hundreds of hydrological models have been applied globally across multiple decades to represent and predict forest hydrological processes. The focus of this chapter is on process-based models and approaches, specifically 'forest hydrology models'; that is, physically based simulation tools that quantify compartments of the forest hydrological cycle. Physically based models can be considered those that describe the conservation of mass, momentum and/or energy. The purpose of this chapter is to provide a brief overview of forest hydrology modeling approaches for answering important global research and management questions. The focus of this chapter is on process-based models and approaches, specifically “forest hydrology models”, i.e., physically-based simulation tools that quantify compartments of the forest hydrological cycle.

  16. Hydrological model coupling with ANNs

    Science.gov (United States)

    Kamp, R. G.; Savenije, H. H. G.

    2006-12-01

    Model coupling in general is necessary but complicated. Scientists develop and improve conceptual models to represent physical processes occurring in nature. The next step is to translate these concepts into a mathematical model and finally into a computer model. Problems may appear if the knowledge, encapsulated in a computer model and software program is needed for another purpose. In integrated water management this is often the case when connections between hydrological, hydraulic or ecological models are required. Coupling is difficult for many reasons, related to data formats, compatibility of scales, ability to modify source codes, etc. Hence, there is a need for an efficient and cost effective approach to model-coupling. One solution for model coupling is the use of Artificial Neural Networks (ANNs). The ANN can be used as a fast and effective model simulator which can connect different models. In this paper ANNs are used to couple four different models: a rainfall runoff model, a river channel routing model, an estuarine salt intrusion model, and an ecological model. The coupling as such has proven to be feasible and efficient. However the salt intrusion model appeared difficult to model accurately in an ANN. The ANN has difficulty to represent both short term (tidal) and long term (hydrological) processes.

  17. Socio-hydrological flood models

    Science.gov (United States)

    Barendrecht, Marlies; Viglione, Alberto; Blöschl, Günter

    2017-04-01

    Long-term feedbacks between humans and floods may lead to complex phenomena such as coping strategies, levee effects, call effects, adaptation effects, and poverty traps. Such phenomena cannot be represented by traditional flood risk approaches that are based on scenarios. Instead, dynamic models of the coupled human-flood interactions are needed. These types of models should include both social and hydrological variables as well as other relevant variables, such as economic, environmental, political or technical, in order to adequately represent the feedbacks and processes that are of importance in human-flood systems. These socio-hydrological models may play an important role in integrated flood risk management by exploring a wider range of possible futures, including unexpected phenomena, than is possible by creating and studying scenarios. New insights might come to light about the long term effects of certain measures on society and the natural system. Here we discuss a dynamic framework for flood risk and review the models that are presented in literature. We propose a way forward for socio-hydrological modelling of the human-flood system.

  18. Environmental Observatories and Hydrologic Modeling

    Science.gov (United States)

    Hooper, R. P.; Duncan, J. M.

    2006-12-01

    During the past several years, the environmental sciences community has been attempting to design large- scale obsevatories that will transform the science. A watershed-based observatory has emerged as an effective landscape unit for a broad range of environmental sciences and engineering. For an effective observatory, modeling is a central requirement because models are precise statements of the hypothesized conceptual organization of watersheds and of the processes believed to be controlling hydrology of the watershed. Furthermore, models can serve to determine the value of existing data and the incremental value of any additional data to be collected. Given limited resources, such valuation is mandatory for an objective design of an observatory. Modeling is one part of a "digital watershed" that must be constructed for any observatory, a concept that has been developed by the CUAHSI Hydrologic Information Systems project. A digital watershed has three functions. First, it permits assembly of time series (such as stream discharge or precipitation measurements), static spatial coverages (such as topography), and dynamic fields (such as precipitation radar and other remotely sensed data). Second, based upon this common data description, a digital observatory permits multiple conceptualizations of the observatory to be created and to be stored. These conceptualizations could range from lumped box-and-arrow watershed models, to semi-distributed topographically based models, to three-dimensional finite element models. Finally, each conceptualization can lead to multiple models--that is, a set of equations that quantitatively describe hydrologic (or biogeochemical or geomorphologic) processes through libraries of tools that can be linked as workflow sequences. The advances in cyberinfrastructure that allow the storage of multiple conceptualizations and multiple model formulations of these conceptualizations promise to accelerate advances in environmental science both

  19. Xanthos - A Global Hydrologic Model

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xinya; Vernon, Christopher R.; Hejazi, Mohamad I.; Link, Robert P.; Feng, Leyang; Liu, Yaling; Rauchenstein, Lynn T.

    2017-09-11

    Xanthos is a Python model designed to quantify and analyze global water availability historically and in the future at 0.5° × 0.5° spatial resolution and a monthly time step. Its performance and functionality was tested through real-world applications. It is open-source, extensible and accessible for researchers who work on long-term climate data for studies of global water supply, and the Global Change Assessment Model (GCAM). This package integrates inherent global gridded data maps, I/O modules, hydrologic processes and diagnostics modules parameterized by a user-defined configuration file.

  20. Reaction hotspots at micro- and macroscales: Challenges in early diagenetic modeling (Invited)

    Science.gov (United States)

    Meile, C. D.

    2010-12-01

    Recent experimental developments, including novel chemical characterizations of organic matter composition, innovative methods for tracing mineral transformations, and a wealth of data generated by the omic revolution, are providing new insights into early diagenetic processes. However, integrating and interpreting this new data in the context of a comprehensive model poses a formidable challenge. Key questions emerging from these studies are: (1) what are characteristics of the key functional groups of microorganisms responsible for the breakdown of organic matter; (2) what are the linkages between composition and reactivity of organic matter; (3) how do biogeochemical conditions, including mineral surfaces, mediate the lability of organic matter. In addition, each of the factors controlling organic matter diagenesis must be interpreted within a spatio-temporal context that likely includes significant compartmentalization at a variety of scales. The joint analysis of the many aspects influencing early diagenesis necessitates that we develop simplified approximations while retaining key environmental characteristics. In this presentation, I will show examples of our work which combines experimental and modeling efforts to assess three key features of early diagenesis: (i) the functioning and integration of the microbes as fundamental metabolic entities, (ii) an assessment of organic matter sources and carbon cycling from a range of experimental data, and (iii) the spatio-temporal context of degradation processes taking place. At the cellular scale, we build on the knowledge gained from genome sequencing of environmentally relevant organisms, e.g. Geobacter sulfurreducens, and the reconstruction of their metabolic networks. When combined with an experimental assessment of substrate uptake kinetics one can integrate these representations of in silico microbial cell models into reactive transport models in order to predict their response and distribution in the field

  1. Macro-scale pseudo-particle modeling for particle-fluid systems

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Pseudo-particle modeling (PPM) is a particle method (PM) proposed in 1996. Though it is effective for the simulation of microscopic particle-fluid systems, its application to practical systems is still limited by computational cost.In this note, we speed up the computation by using a combination of weighted averaging with finite difference techniques to upgrade the particle interactions to a fluid element level, which conforms to the Navier-Stokes equation. The approach, abbreviated to MaPPM, is then applied to the problem of one-dimensional Poiseuille flow with a quantitative comparison to the results of another related PM smoothed particle hydrodynamics (SPH), where the accuracy and efficiency of MaPPM is found to be much better than that of SPH. Flows around a cylinder and multiple freely moving particles are also simulated with the new model, resulting in reasonable flow pattern and drag coefficient. The convergence and robustness of the algorithm prove promising.``

  2. Transpression / transtension: a model for micro- to macro-scale deformation

    Science.gov (United States)

    Sanderson, David J.

    2014-05-01

    Transpression and transtension were terms introduces by Harland (1971) to define deformation that involves both transcurrent (strike-slip) movement along a zone and compression or extension across it. Sanderson & Marchini (1984) produced a strain model for transpression, and the concept has subsequently been applied in a variety of tectonic settings over a wide range of scales. Transpression is modelled by the simultaneous application of a transcurrent shear and horizontal shortening orthogonal to a block, with no lateral stretch. Sanderson & Marchini originally used two parameters α (the vertical elongation) and γ (the shear strain on the zone boundary) to define the deformation within the block. For constant volume deformation, the shortening across the zone is simply β = α-1, but volume change (Δ) is easily incorporated in the models, where α β = (1+Δ). One may also specify transpression in terms of the strain rates (δɛsgγ) and the direction (A) and amount (S) of convergence/divergence, where tan A = δγ / δɛ. The transpressional model has a number of important implications, which include: It generally leads to triaxial deformation, hence is intrinsically 3-dimensional, e.g. flattening strains characterise transpressional zones, whereas constrictional strains result from transtension. It represents a spectrum of strain states, providing a useful way of classifying deformational styles between generalised compressional, strike-slip and extensional regimes. The vorticity axis will be normal to the shear direction (vertical) and does not need to be parallel to the intermediate principle stain axis. At a convergence angle of A ≡70.5O the incremental and finite strain axes may be differently oriented and this may produce situations where structures may appear to develop in unusual orientations with respect to the finite strain fabrics Both the compressional and shear components contribute to the stretch Sn normal to the zone, where Sn = (α2 + γ2

  3. The Central Valley Hydrologic Model

    Science.gov (United States)

    Faunt, C.; Belitz, K.; Hanson, R. T.

    2009-12-01

    Historically, California’s Central Valley has been one of the most productive agricultural regions in the world. The Central Valley also is rapidly becoming an important area for California’s expanding urban population. In response to this competition for water, a number of water-related issues have gained prominence: conjunctive use, artificial recharge, hydrologic implications of land-use change, subsidence, and effects of climate variability. To provide information to stakeholders addressing these issues, the USGS made a detailed assessment of the Central Valley aquifer system that includes the present status of water resources and how these resources have changed over time. The principal product of this assessment is a tool, referred to as the Central Valley Hydrologic Model (CVHM), that simulates surface-water flows, groundwater flows, and land subsidence in response to stresses from human uses and from climate variability throughout the entire Central Valley. The CVHM utilizes MODFLOW combined with a new tool called “Farm Process” to simulate groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis. This model was discretized horizontally into 20,000 1-mi2 cells and vertically into 10 layers ranging in thickness from 50 feet at the land surface to 750 feet at depth. A texture model constructed by using data from more than 8,500 drillers’ logs was used to estimate hydraulic properties. Unmetered pumpage and surface-water deliveries for 21 water-balance regions were simulated with the Farm Process. Model results indicate that human activities, predominately surface-water deliveries and groundwater pumping for irrigated agriculture, have dramatically influenced the hydrology of the Central Valley. These human activities have increased flow though the aquifer system by about a factor of six compared to pre-development conditions. The simulated hydrology reflects spatial

  4. Efficient Use of Prior Information to Calibrate the Gridded Surface Subsurface Hydrologic Analysis (GSSHA) Hydrology Model

    Science.gov (United States)

    2014-09-01

    Gridded Surface Subsurface Hydrologic Analysis (GSSHA) Hydrology Model by Brian E. Skahill and Charles W. Downer PURPOSE: The purpose of this... Hydrologic Analysis (GSSHA) model. These new capabilities enable the incorporation of soft data, or prior information (i.e., extra observations which...traditional hydrologic simulation models (viz., lumped and semidistributed model structures). Such models have the potential to predict with greater

  5. Uncertainty in hydrological change modelling

    DEFF Research Database (Denmark)

    Seaby, Lauren Paige

    methodology for basin discharge and groundwater heads. The ensemble of 11 climate models varied in strength, significance, and sometimes in direction of the climate change signal. The more complex daily DBS correction methods were more accurate at transferring precipitation changes in mean as well...... as the variance, and improving the characterisation of day to day variation as well as heavy events. However, the most highly parameterised of the DBS methods were less robust under climate change conditions. The spatial characteristics of groundwater head and stream discharge were best represented by DBS methods...... applied at the grid scale. Flux and state hydrological outputs which integrate responses over time and space showed more sensitivity to precipitation mean spatial biases and less so on extremes. In the investigated catchments, the projected change of groundwater levels and basin discharge between current...

  6. Remote sensing applications to hydrologic modeling

    Science.gov (United States)

    Dozier, J.; Estes, J. E.; Simonett, D. S.; Davis, R.; Frew, J.; Marks, D.; Schiffman, K.; Souza, M.; Witebsky, E.

    1977-01-01

    An energy balance snowmelt model for rugged terrain was devised and coupled to a flow model. A literature review of remote sensing applications to hydrologic modeling was included along with a software development outline.

  7. Application of hydrologic forecast model.

    Science.gov (United States)

    Hua, Xu; Hengxin, Xue; Zhiguo, Chen

    2012-01-01

    In order to overcome the shortcoming of the solution may be trapped into the local minimization in the traditional TSK (Takagi-Sugeno-Kang) fuzzy inference training, this paper attempts to consider the TSK fuzzy system modeling approach based on the visual system principle and the Weber law. This approach not only utilizes the strong capability of identifying objects of human eyes, but also considers the distribution structure of the training data set in parameter regulation. In order to overcome the shortcoming of it adopting the gradient learning algorithm with slow convergence rate, a novel visual TSK fuzzy system model based on evolutional learning is proposed by introducing the particle swarm optimization algorithm. The main advantage of this method lies in its very good optimization, very strong noise immunity and very good interpretability. The new method is applied to long-term hydrological forecasting examples. The simulation results show that the method is feasible and effective, the new method not only inherits the advantages of traditional visual TSK fuzzy models but also has the better global convergence and accuracy than the traditional model.

  8. Hydrologic Modeling of Boreal Forest Ecosystems

    Science.gov (United States)

    Haddeland, I.; Lettenmaier, D. P.

    1995-01-01

    This study focused on the hydrologic response, including vegetation water use, of two test regions within the Boreal-Ecosystem-Atmosphere Study (BOREAS) region in the Canadian boreal forest, one north of Prince Albert, Saskatchewan, and the other near Thompson, Manitoba. Fluxes of moisture and heat were studied using a spatially distributed hydrology soil-vegetation-model (DHSVM).

  9. Grey Box Modelling of Hydrological Systems

    DEFF Research Database (Denmark)

    Thordarson, Fannar Ørn

    The main topic of the thesis is grey box modelling of hydrologic systems, as well as formulation and assessment of their embedded uncertainties. Grey box model is a combination of a white box model, a physically-based model that is traditionally formulated using deterministic ordinary differential...... the lack of fit in state space formulation, and further support decisions for a model expansion. By using stochastic differential equations to formulate the dynamics of the hydrological system, either the complexity of the model can be increased by including the necessary hydrological processes...... in the model, or formulation of process noise can be considered so that it meets the physical limits of the hydrological system and give an adequate description of the embedded uncertainty in model structure. The thesis consists of two parts: a summary report and a part which contains six scientific papers...

  10. Snow hydrology in a general circulation model

    Science.gov (United States)

    Marshall, Susan; Roads, John O.; Glatzmaier, Gary

    1994-01-01

    A snow hydrology has been implemented in an atmospheric general circulation model (GCM). The snow hydrology consists of parameterizations of snowfall and snow cover fraction, a prognostic calculation of snow temperature, and a model of the snow mass and hydrologic budgets. Previously, only snow albedo had been included by a specified snow line. A 3-year GCM simulation with this now more complete surface hydrology is compared to a previous GCM control run with the specified snow line, as well as with observations. In particular, the authors discuss comparisons of the atmospheric and surface hydrologic budgets and the surface energy budget for U.S. and Canadian areas. The new snow hydrology changes the annual cycle of the surface moisture and energy budgets in the model. There is a noticeable shift in the runoff maximum from winter in the control run to spring in the snow hydrology run. A substantial amount of GCM winter precipitation is now stored in the seasonal snowpack. Snow cover also acts as an important insulating layer between the atmosphere and the ground. Wintertime soil temperatures are much higher in the snow hydrology experiment than in the control experiment. Seasonal snow cover is important for dampening large fluctuations in GCM continental skin temperature during the Northern Hemisphere winter. Snow depths and snow extent show good agreement with observations over North America. The geographic distribution of maximum depths is not as well simulated by the model due, in part, to the coarse resolution of the model. The patterns of runoff are qualitatively and quantitatively similar to observed patterns of streamflow averaged over the continental United States. The seasonal cycles of precipitation and evaporation are also reasonably well simulated by the model, although their magnitudes are larger than is observed. This is due, in part, to a cold bias in this model, which results in a dry model atmosphere and enhances the hydrologic cycle everywhere.

  11. A Spatially Explicit and Seasonally Varying Cholera Prevalence Model With Distributed Macro-Scale Environmental and Hydroclimatic Forcings

    Science.gov (United States)

    Akanda, A. S.; Jutla, A. S.; Eltahir, E. A.; Islam, S.

    2011-12-01

    Despite major advances in the ecological and microbiological understanding of the bacterium Vibrio cholerae, the role of underlying large-scale processes in the progression of the cholera disease in space and time is not well understood. Here, we present a spatially explicit and seasonally varying coupled hydroclimatology-epidemiology model for understanding regional scale cholera prevalence in response to large scale hydroclimatic and environmental forcings. Our results show that environmental cholera transmission can be modulated by two spatially and seasonally distinct mechanisms - influenced by dry and wet season hydrologic determinants. The model is applied to the Ganges-Brahmaputra-Meghna Basin areas in Bangladesh to simulate spatially explicit cholera prevalence rates, and validated with long-term cholera data from Dhaka and shorter-term records from regional surveillance locations. The model reproduces the variability of cholera prevalence at monthly, seasonal, and interannual timescales and highlights the role of asymmetric large scale hydroclimatic processes as the dominant controls. Our findings have important implications for formulating effective cholera intervention strategies, and for understanding the impacts of changing climate patterns on seasonal cholera transmission.

  12. Land-surface modelling in hydrological perspective

    DEFF Research Database (Denmark)

    Overgaard, Jesper; Rosbjerg, Dan; Butts, M.B.

    2006-01-01

    The purpose of this paper is to provide a review of the different types of energy-based land-surface models (LSMs) and discuss some of the new possibilities that will arise when energy-based LSMs are combined with distributed hydrological modelling. We choose to focus on energy-based approaches, ......, and the difficulties inherent in various evaluation procedures are presented. Finally, the dynamic coupling of hydrological and atmospheric models is explored, and the perspectives of such efforts are discussed....

  13. Land-surface modelling in hydrological perspective

    DEFF Research Database (Denmark)

    Overgaard, Jesper; Rosbjerg, Dan; Butts, M.B.

    2006-01-01

    The purpose of this paper is to provide a review of the different types of energy-based land-surface models (LSMs) and discuss some of the new possibilities that will arise when energy-based LSMs are combined with distributed hydrological modelling. We choose to focus on energy-based approaches......, and the difficulties inherent in various evaluation procedures are presented. Finally, the dynamic coupling of hydrological and atmospheric models is explored, and the perspectives of such efforts are discussed....

  14. Genetic Programming for Automatic Hydrological Modelling

    Science.gov (United States)

    Chadalawada, Jayashree; Babovic, Vladan

    2017-04-01

    One of the recent challenges for the hydrologic research community is the need for the development of coupled systems that involves the integration of hydrologic, atmospheric and socio-economic relationships. This poses a requirement for novel modelling frameworks that can accurately represent complex systems, given, the limited understanding of underlying processes, increasing volume of data and high levels of uncertainity. Each of the existing hydrological models vary in terms of conceptualization and process representation and is the best suited to capture the environmental dynamics of a particular hydrological system. Data driven approaches can be used in the integration of alternative process hypotheses in order to achieve a unified theory at catchment scale. The key steps in the implementation of integrated modelling framework that is influenced by prior understanding and data, include, choice of the technique for the induction of knowledge from data, identification of alternative structural hypotheses, definition of rules, constraints for meaningful, intelligent combination of model component hypotheses and definition of evaluation metrics. This study aims at defining a Genetic Programming based modelling framework that test different conceptual model constructs based on wide range of objective functions and evolves accurate and parsimonious models that capture dominant hydrological processes at catchment scale. In this paper, GP initializes the evolutionary process using the modelling decisions inspired from the Superflex framework [Fenicia et al., 2011] and automatically combines them into model structures that are scrutinized against observed data using statistical, hydrological and flow duration curve based performance metrics. The collaboration between data driven and physical, conceptual modelling paradigms improves the ability to model and manage hydrologic systems. Fenicia, F., D. Kavetski, and H. H. Savenije (2011), Elements of a flexible approach

  15. Landsat imagery for hydrologic modeling

    Science.gov (United States)

    Taylor, R. S.; Shubinski, R. P.; George, T. S.

    1980-01-01

    The cost and effectiveness of developing land cover information derived from Landsat imagery for hydrologic studies are compared with the cost and effectiveness of conventional sources. The analysis shows that the conventional and Landsat methods are nearly equally effective in providing adequate land cover data for hydrologic studies. The total cost effectiveness analysis demonstrates that the conventional method is cost effective for a study area of less than 26 sq km and that the Landsat method is to be preferred for areas of more than 26 sq km.

  16. Data assimilation in integrated hydrological modelling

    DEFF Research Database (Denmark)

    Rasmussen, Jørn

    Integrated hydrological models are useful tools for water resource management and research, and advances in computational power and the advent of new observation types has resulted in the models generally becoming more complex and distributed. However, the models are often characterized by a high...... degree of parameterization which results in significant model uncertainty which cannot be reduced much due to observations often being scarce and often taking the form of point measurements. Data assimilation shows great promise for use in integrated hydrological models , as it allows for observations...... to be efficiently combined with models to improve model predictions, reduce uncertainty and estimate model parameters. In this thesis, a framework for assimilating multiple observation types and updating multiple components and parameters of a catchment scale integrated hydrological model is developed and tested...

  17. An approach to measure parameter sensitivity in watershed hydrologic modeling

    Data.gov (United States)

    U.S. Environmental Protection Agency — Abstract Hydrologic responses vary spatially and temporally according to watershed characteristics. In this study, the hydrologic models that we developed earlier...

  18. Uncertainty of the hydrological response to climate change conditions; 605 basins, 3 hydrological models, 5 climate models, 5 hydrological variables

    Science.gov (United States)

    Melsen, Lieke; Mizukami, Naoki; Newman, Andrew; Clark, Martyn; Teuling, Adriaan

    2016-04-01

    Many studies investigated the effect of a changing climate on the hydrological response of a catchment and uncertainty of the effect coming from hydrologic modelling (e.g., forcing, hydrologic model structures, and parameters). However, most past studies used only a single or a small number of catchments. To go beyond the case-study, and to assess the uncertainty involved in modelling the hydrological impact of climate change more comprehensively, we studied 605 basins over a wide range of climate regimes throughout the contiguous USA. We used three different widely-used hydrological models (VIC, HBV, SAC), which we forced with five distinct climate model outputs. The hydrological models have been run for a base period (1986-2008) for which observations were available, and for a future period (2070-2099). Instead of calibrating each hydrological model for each basin, the model has been run with a parameter sample (varying from 1600 to 1900 samples dependent on the number of free parameters in the model). Five hydrological states and fluxes were stored; discharge, evapotranspiration, soil moisture, SWE and snow melt, and 15 different metrics and signatures have been obtained for each model run. With the results, we conduct a sensitivity analysis over the change in signatures from the future period compared to the base period. In this way, we can identify the parameters that are responsible for certain projected changes, and identify the processes responsible for this change. By using three different models, in which VIC is most distinctive in including explicit vegetation parameters, we can compare different process representations and the effect on the projected hydrological change.

  19. Putting hydrological modelling practice to the test

    NARCIS (Netherlands)

    Melsen, Lieke Anna

    2017-01-01

    Six steps can be distinguished in the process of hydrological modelling: the perceptual model (deciding on the processes), the conceptual model (deciding on the equations), the procedural model (get the code to run on a computer), calibration (identify the parameters), evaluation (confronting output

  20. Balancing model complexity and measurements in hydrology

    Science.gov (United States)

    Van De Giesen, N.; Schoups, G.; Weijs, S. V.

    2012-12-01

    The Data Processing Inequality implies that hydrological modeling can only reduce, and never increase, the amount of information available in the original data used to formulate and calibrate hydrological models: I(X;Z(Y)) ≤ I(X;Y). Still, hydrologists around the world seem quite content building models for "their" watersheds to move our discipline forward. Hydrological models tend to have a hybrid character with respect to underlying physics. Most models make use of some well established physical principles, such as mass and energy balances. One could argue that such principles are based on many observations, and therefore add data. These physical principles, however, are applied to hydrological models that often contain concepts that have no direct counterpart in the observable physical universe, such as "buckets" or "reservoirs" that fill up and empty out over time. These not-so-physical concepts are more like the Artificial Neural Networks and Support Vector Machines of the Artificial Intelligence (AI) community. Within AI, one quickly came to the realization that by increasing model complexity, one could basically fit any dataset but that complexity should be controlled in order to be able to predict unseen events. The more data are available to train or calibrate the model, the more complex it can be. Many complexity control approaches exist in AI, with Solomonoff inductive inference being one of the first formal approaches, the Akaike Information Criterion the most popular, and Statistical Learning Theory arguably being the most comprehensive practical approach. In hydrology, complexity control has hardly been used so far. There are a number of reasons for that lack of interest, the more valid ones of which will be presented during the presentation. For starters, there are no readily available complexity measures for our models. Second, some unrealistic simplifications of the underlying complex physics tend to have a smoothing effect on possible model

  1. The Regional Hydrologic Extremes Assessment System: A software framework for hydrologic modeling and data assimilation

    National Research Council Canada - National Science Library

    Konstantinos M Andreadis; Narendra Das; Dimitrios Stampoulis; Amor Ines; Joshua B Fisher; Stephanie Granger; Jessie Kawata; Eunjin Han; Ali Behrangi

    2017-01-01

    The Regional Hydrologic Extremes Assessment System (RHEAS) is a prototype software framework for hydrologic modeling and data assimilation that automates the deployment of water resources nowcasting and forecasting applications...

  2. Parameterization guidelines and considerations for hydrologic models

    Science.gov (United States)

     R. W. Malone; G. Yagow; C. Baffaut; M.W  Gitau; Z. Qi; Devendra Amatya; P.B.   Parajuli; J.V. Bonta; T.R.  Green

    2015-01-01

     Imparting knowledge of the physical processes of a system to a model and determining a set of parameter values for a hydrologic or water quality model application (i.e., parameterization) are important and difficult tasks. An exponential...

  3. Treatments of Precipitation Inputs to Hydrologic Models

    Science.gov (United States)

    Hydrological models are used to assess many water resources problems from agricultural use and water quality to engineering issues. The success of these models are dependent on correct parameterization; the most sensitive being the rainfall input time series. These records can come from land-based ...

  4. Evaluating spatial patterns in hydrological modelling

    DEFF Research Database (Denmark)

    Koch, Julian

    is not fully exploited by current modelling frameworks due to the lack of suitable spatial performance metrics. Furthermore, the traditional model evaluation using discharge is found unsuitable to lay confidence on the predicted catchment inherent spatial variability of hydrological processes in a fully...... the contiguous United Sates (10^6 km2). To this end, the thesis at hand applies a set of spatial performance metrics on various hydrological variables, namely land-surface-temperature (LST), evapotranspiration (ET) and soil moisture. The inspiration for the applied metrics is found in related fields...

  5. Evapotranspiration and runoff from large land areas: Land surface hydrology for atmospheric general circulation models

    Science.gov (United States)

    Famiglietti, J. S.; Wood, Eric F.

    1993-01-01

    A land surface hydrology parameterization for use in atmospheric GCM's is presented. The parameterization incorporates subgrid scale variability in topography, soils, soil moisture and precipitation. The framework of the model is the statistical distribution of a topography-soils index, which controls the local water balance fluxes, and is therefore taken to represent the large land area. Spatially variable water balance fluxes are integrated with respect to the topography-soils index to yield our large topography-soils distribution, and interval responses are weighted by the probability of occurrence of the interval. Grid square averaged land surface fluxes result. The model functions independently as a macroscale water balance model. Runoff ratio and evapotranspiration efficiency parameterizations are derived and are shown to depend on the spatial variability of the above mentioned properties and processes, as well as the dynamics of land surface-atmosphere interactions.

  6. Thermodynamic watershed hydrological model: Constitutive relationship

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The representative elementary watershed (REW) approach proposed by Reggiani et al. was the first attempt to develop scale adaptable equations applicable directly at the macro scale. Tian et al. extended the initial definition of REW for simulating the energy related processes, and re-organized the deriving procedure of balance equations so that additional sub-regions and substances could be easily incorpo-rated. The resultant ordinary differential equation set can simulate various hydro-logical processes in a physically reasonable way. However, constitutive and geo-metric relationships have not been developed for Tian et al.’s equation set, which are necessary for the thermodynamic watershed hydrological model to apply in hydrological modeling practice. In this work, the constitutive equations for mass exchange terms and momentum exchange terms were developed as well as geo-metric relationships. The closed ordinary differential equation set with nine equa-tions was finally obtained.

  7. Validation of a national hydrological model

    Science.gov (United States)

    McMillan, H. K.; Booker, D. J.; Cattoën, C.

    2016-10-01

    Nationwide predictions of flow time-series are valuable for development of policies relating to environmental flows, calculating reliability of supply to water users, or assessing risk of floods or droughts. This breadth of model utility is possible because various hydrological signatures can be derived from simulated flow time-series. However, producing national hydrological simulations can be challenging due to strong environmental diversity across catchments and a lack of data available to aid model parameterisation. A comprehensive and consistent suite of test procedures to quantify spatial and temporal patterns in performance across various parts of the hydrograph is described and applied to quantify the performance of an uncalibrated national rainfall-runoff model of New Zealand. Flow time-series observed at 485 gauging stations were used to calculate Nash-Sutcliffe efficiency and percent bias when simulating between-site differences in daily series, between-year differences in annual series, and between-site differences in hydrological signatures. The procedures were used to assess the benefit of applying a correction to the modelled flow duration curve based on an independent statistical analysis. They were used to aid understanding of climatological, hydrological and model-based causes of differences in predictive performance by assessing multiple hypotheses that describe where and when the model was expected to perform best. As the procedures produce quantitative measures of performance, they provide an objective basis for model assessment that could be applied when comparing observed daily flow series with competing simulated flow series from any region-wide or nationwide hydrological model. Model performance varied in space and time with better scores in larger and medium-wet catchments, and in catchments with smaller seasonal variations. Surprisingly, model performance was not sensitive to aquifer fraction or rain gauge density.

  8. Hydrologic impacts of climate change on the Nile River basin: Implications of the 2007 IPCC climate scenarios

    NARCIS (Netherlands)

    Beyene, T.; Lettenmaier, D.P.; Kabat, P.

    2010-01-01

    We assess the potential impacts of climate change on the hydrology and water resources of the Nile River basin using a macroscale hydrology model. Model inputs are bias corrected and spatially downscaled 21st Century simulations from 11 General Circulation Models (GCMs) and two global emissions scen

  9. Revising Hydrology of a Land Surface Model

    Science.gov (United States)

    Le Vine, Nataliya; Butler, Adrian; McIntyre, Neil; Jackson, Christopher

    2015-04-01

    Land Surface Models (LSMs) are key elements in guiding adaptation to the changing water cycle and the starting points to develop a global hyper-resolution model of the terrestrial water, energy and biogeochemical cycles. However, before this potential is realised, there are some fundamental limitations of LSMs related to how meaningfully hydrological fluxes and stores are represented. An important limitation is the simplistic or non-existent representation of the deep subsurface in LSMs; and another is the lack of connection of LSM parameterisations to relevant hydrological information. In this context, the paper uses a case study of the JULES (Joint UK Land Environmental Simulator) LSM applied to the Kennet region in Southern England. The paper explores the assumptions behind JULES hydrology, adapts the model structure and optimises the coupling with the ZOOMQ3D regional groundwater model. The analysis illustrates how three types of information can be used to improve the model's hydrology: a) observations, b) regionalized information, and c) information from an independent physics-based model. It is found that: 1) coupling to the groundwater model allows realistic simulation of streamflows; 2) a simple dynamic lower boundary improves upon JULES' stationary unit gradient condition; 3) a 1D vertical flow in the unsaturated zone is sufficient; however there is benefit in introducing a simple dual soil moisture retention curve; 4) regionalized information can be used to describe soil spatial heterogeneity. It is concluded that relatively simple refinements to the hydrology of JULES and its parameterisation method can provide a substantial step forward in realising its potential as a high-resolution multi-purpose model.

  10. Eco-Hydrological Modelling of Stream Valleys

    DEFF Research Database (Denmark)

    Johansen, Ole

    Predicting the effects of hydrological alterations on terrestrial stream valley ecosystems requires multidisciplinary approaches involving both engineers and ecologists. Groundwater discharge in stream valleys and other lowland areas support a number of species rich ecosystems, and their protection...... is prioritised worldwide. Protection requires improved knowledge on the functioning of these ecosystems and especially the linkages between vegetation, groundwater discharge and water level conditions are crucial for management applications. Groundwater abstraction affects catchment hydrology and thereby also...... groundwater discharge. Numerical hydrological modelling has been widely used for evaluation of sustainable groundwater resources and effects of abstraction, however, the importance of local scale heterogeneity becomes increasingly important in the assessment of local damage to these groundwater dependent...

  11. HYDROLOGICAL PROCESSES MODELLING USING ADVANCED HYDROINFORMATIC TOOLS

    Directory of Open Access Journals (Sweden)

    BEILICCI ERIKA

    2014-03-01

    Full Text Available The water has an essential role in the functioning of ecosystems by integrating the complex physical, chemical, and biological processes that sustain life. Water is a key factor in determining the productivity of ecosystems, biodiversity and species composition. Water is also essential for humanity: water supply systems for population, agriculture, fisheries, industries, and hydroelectric power depend on water supplies. The modelling of hydrological processes is an important activity for water resources management, especially now, when the climate change is one of the major challenges of our century, with strong influence on hydrological processes dynamics. Climate change and needs for more knowledge in water resources require the use of advanced hydroinformatic tools in hydrological processes modelling. The rationale and purpose of advanced hydroinformatic tools is to develop a new relationship between the stakeholders and the users and suppliers of the systems: to offer the basis (systems which supply useable results, the validity of which cannot be put in reasonable doubt by any of the stakeholders involved. For a successful modelling of hydrological processes also need specialists well trained and able to use advanced hydro-informatics tools. Results of modelling can be a useful tool for decision makers to taking efficient measures in social, economical and ecological domain regarding water resources, for an integrated water resources management.

  12. Modeling the hydrological cycle on Mars

    Directory of Open Access Journals (Sweden)

    Ghada Machtoub

    2012-03-01

    Full Text Available The study provides a detailed analysis of the hydrological cycle on Mars simulated with a newly developed microphysical model, incorporated in a spectral Mars General Circulation Model. The modeled hydrological cycle is compared well with simulations of other global climate models. The simulated seasonal migration ofwater vapor, circulation instability, and the high degree of temporal variability of localized water vapor outbursts are shown closely consistent with recent observations. The microphysical parameterization provides a significant improvement in the modeling of ice clouds evolved over the tropics and major ancient volcanoes on Mars. The most significant difference between the simulations presented here and other GCM results is the level at which the water ice clouds are found. The model findings also support interpretation of observed thermal anomalies in the Martian tropics during northern spring and summer seasons.

  13. Inverse distributed hydrological modelling of alpine catchments

    Directory of Open Access Journals (Sweden)

    H. Kunstmann

    2005-12-01

    Full Text Available Even in physically based distributed hydrological models, various remaining parameters must be estimated for each sub-catchment. This can involve tremendous effort, especially when the number of sub-catchments is large and the applied hydrological model is computationally expensive. Automatic parameter estimation tools can significantly facilitate the calibration process. Hence, we combined the nonlinear parameter estimation tool PEST with the distributed hydrological model WaSiM. PEST is based on the Gauss-Marquardt-Levenberg method, a gradient-based nonlinear parameter estimation algorithm. WaSiM is a fully distributed hydrological model using physically based algorithms for most of the process descriptions.

    WaSiM was applied to the alpine/prealpine Ammer River catchment (southern Germany, 710 km2 in a 100×100 m2 horizontal resolution. The catchment is heterogeneous in terms of geology, pedology and land use and shows a complex orography (the difference of elevation is around 1600 m. Using the developed PEST-WaSiM interface, the hydrological model was calibrated by comparing simulated and observed runoff at eight gauges for the hydrologic year 1997 and validated for the hydrologic year 1993. For each sub-catchment four parameters had to be calibrated: the recession constants of direct runoff and interflow, the drainage density, and the hydraulic conductivity of the uppermost aquifer. Additionally, five snowmelt specific parameters were adjusted for the entire catchment. Altogether, 37 parameters had to be calibrated. Additional a priori information (e.g. from flood hydrograph analysis narrowed the parameter space of the solutions and improved the non-uniqueness of the fitted values. A reasonable quality of fit was achieved. Discrepancies between modelled and observed runoff were also due to the small number of meteorological stations and corresponding interpolation artefacts in the orographically complex

  14. A Molecular Dynamics simulation of Hugoniot curves of HMX using ReaxFF and its application in SPH modeling of macroscale terminal effects

    Science.gov (United States)

    Liu, Gui-Rong; Wang, Gangyu; Peng, Qing; de, Suvranu

    2015-06-01

    HMX is a widely used high explosive. Hugoniot curve is a valuable tool for analyzing the equations of state, and is of importance for all energetic materials including HMX. The Hugoniot curves serve as one of the key character in continuum modeling of high explosives. It can be obtained from experimental measurements, and recently also from computational studies. In this study, the Hugoniot curve of HMX is calculated using a multi-scale shock technique via Molecular Dynamics (MD) simulations, where the reactive force field ReaxFF is obtained from Quantum Mechanics calculations and tailored for HMX. It is found that our MD Hugoniot curve of HMX from the optimized ReaxFF potential agree well with experiments. The MD Hugoniot curve of HMX is also incorporated in our in-house Smoothed Particle Hydrodynamics (SPH) code for the modeling of the macro-scale explosive behaviors of HMX explosives and HMX cased in a 3D cylinder. The authors would like to acknowledge the generous financial support from the Defense Threat Reduction Agency (DTRA) Grant HDTRA1-13-1-0025.

  15. Towards Better Coupling of Hydrological Simulation Models

    Science.gov (United States)

    Penton, D.; Stenson, M.; Leighton, B.; Bridgart, R.

    2012-12-01

    Standards for model interoperability and scientific workflow software provide techniques and tools for coupling hydrological simulation models. However, model builders are yet to realize the benefits of these and continue to write ad hoc implementations and scripts. Three case studies demonstrate different approaches to coupling models, the first using tight interfaces (OpenMI), the second using a scientific workflow system (Trident) and the third using a tailored execution engine (Delft Flood Early Warning System - Delft-FEWS). No approach was objectively better than any other approach. The foremost standard for coupling hydrological models is the Open Modeling Interface (OpenMI), which defines interfaces for models to interact. An implementation of the OpenMI standard involves defining interchange terms and writing a .NET/Java wrapper around the model. An execution wrapper such as OatC.GUI or Pipistrelle executes the models. The team built two OpenMI implementations for eWater Source river system models. Once built, it was easy to swap river system models. The team encountered technical challenges with versions of the .Net framework (3.5 calling 4.0) and with the performance of the execution wrappers when running daily simulations. By design, the OpenMI interfaces are general, leaving significant decisions around the semantics of the interfaces to the implementer. Increasingly, scientific workflow tools such as Kepler, Taverna and Trident are able to replace custom scripts. These tools aim to improve the provenance and reproducibility of processing tasks. In particular, Taverna and the myExperiment website have had success making many bioinformatics workflows reusable and sharable. The team constructed Trident activities for hydrological software including IQQM, REALM and eWater Source. They built an activity generator for model builders to build activities for particular river systems. The models were linked at a simulation level, without any daily time

  16. Grid based calibration of SWAT hydrological models

    Directory of Open Access Journals (Sweden)

    D. Gorgan

    2012-07-01

    Full Text Available The calibration and execution of large hydrological models, such as SWAT (soil and water assessment tool, developed for large areas, high resolution, and huge input data, need not only quite a long execution time but also high computation resources. SWAT hydrological model supports studies and predictions of the impact of land management practices on water, sediment, and agricultural chemical yields in complex watersheds. The paper presents the gSWAT application as a web practical solution for environmental specialists to calibrate extensive hydrological models and to run scenarios, by hiding the complex control of processes and heterogeneous resources across the grid based high computation infrastructure. The paper highlights the basic functionalities of the gSWAT platform, and the features of the graphical user interface. The presentation is concerned with the development of working sessions, interactive control of calibration, direct and basic editing of parameters, process monitoring, and graphical and interactive visualization of the results. The experiments performed on different SWAT models and the obtained results argue the benefits brought by the grid parallel and distributed environment as a solution for the processing platform. All the instances of SWAT models used in the reported experiments have been developed through the enviroGRIDS project, targeting the Black Sea catchment area.

  17. How good is good in hydrological modeling?

    Science.gov (United States)

    Seibert, J.; Vis, M.; van Meerveld, I. H. J.

    2016-12-01

    Models are never perfect and hydrological models are no exception. Even with the most sophisticated hydrological models, runoff simulations never fully agree. This is at least partly because of uncertainties in the observed input and output data. On the other hand, even a poor model can often provide fair simulations simply because the forcing data (precipitation, temperature, …) do not allow the model to go completely wrong. Commonly used measures to assess model performance, such as the Nash-Sutcliffe model efficiency, do not allow direct judgment of model performance in terms of what can be achieved with a certain dataset, and different guidelines are given in the literature on what values indicate a good model performance. This is not satisfactory, especially when it comes to assessing the performances of uncalibrated models. We, therefore, suggest the use of an upper and a lower benchmark to better assess model performance. The upper benchmark is a measure of what can be achieved and can be quantified by the performance of a calibrated simple model. The lower benchmark is a measure of what can be expected and can be quantified by an ensemble mean of an uncalibrated simple model where random parameter sets or parameter sets from other catchments are used. In this contribution, we focus on this lower benchmark. Preliminary results using the HBV model, a simple, bucket-type model, indicated surprisingly good model performance of the ensemble means, even when individual parameterisations resulted in very poor fits. To test this further, we applied the HBV model using data from 600 catchments in the USA. The model was calibrated for each catchment and different ensembles where used to compute ensemble mean time series based on: 1) random parameter values, 2) parameter sets from all 600 catchments (minus the one in question), 3) parameter sets from all catchments in the respective hydrological region as defined by the USGS, and 4) parameter sets from the x nearest

  18. Monthly Water Balance Model Hydrology Futures

    Science.gov (United States)

    Bock, Andy; Hay, Lauren E.; Markstrom, Steven; Atkinson, R. Dwight

    2016-01-01

    A monthly water balance model (MWBM) was driven with precipitation and temperature using a station-based dataset for current conditions (1950 to 2010) and selected statistically-downscaled general circulation models (GCMs) for current and future conditions (1950 to 2099) across the conterminous United States (CONUS) using hydrologic response units from the Geospatial Fabric for National Hydrologic Modeling (http://dx.doi.org/doi:10.5066/F7542KMD). Six MWBM output variables (actual evapotranspiration (AET), potential evapotranspiration (PET), runoff (RO), streamflow (STRM), soil moisture storage (SOIL), and snow water equivalent (SWE)) and the two MWBM input variables (atmospheric temperature (TAVE) and precipitation (PPT)) were summarized for hydrologic response units and aggregated at points of interest on a stream network. Results were then organized into the Monthly Water Balance Hydrology Futures database, an open-access database using netCDF format (http://cida-eros-mows1.er.usgs.gov/thredds/dodsC/nwb_pub/).  Methods used to calibrate and parameterize the MWBM are detailed in the Hydrology and Earth System Sciences (HESS)  paper "Parameter regionalization of a monthly water balance model for the conterminous United States" by Bock and others (2016).  See the discussion paper link in the "Related External Resources" section for access.  Supplemental data files related to the plots and data analysis in Bock and others (2016) can be found in the HESS-2015-325.zip folder in the "Attached Files" section.  Detailed information on the files and data can be found in the ReadMe.txt contained within the zipped folder. Recommended citation of discussion paper:Bock, A.R., Hay, L.E., McCabe, G.J., Markstrom, S.L., and Atkinson, R.D., 2016, Parameter regionalization of a monthly water balance model for the conterminous United States: Hydrology and Earth System Sciences, v. 20, 2861-2876, doi:10.5194/hess-20-2861-2016, 2016

  19. Thermodynamic watershed hydrological model: Constitutive relationship

    Institute of Scientific and Technical Information of China (English)

    TIAN FuQiang; HU HePing; LEI ZhiDong

    2008-01-01

    The representative elementary watershed (REW) approach proposed by Reggiani et al. Was the first attempt to develop scale adaptable equations applicable directly at the macro scale. Tian et al. Extended the initial definition of REW for simulating the energy related processes, and re-organized the deriving procedure of balance equations so that additional sub-regions and substances could be easily incorpo- rated. The resultant ordinary differential equation set can simulate various hydro- logical processes in a physically reasonable way. However, constitutive and geo- metric relationships have not been developed for Tian et al.'s equation set, which are necessary for the thermodynamic watershed hydrological model to apply in hydrological modeling practice. In this work, the constitutive equations for mass exchange terms and momentum exchange terms were developed as well as geo- metric relationships. The closed ordinary differential equation set with nine equations was finally obtained.

  20. Developing Flexible, Integrated Hydrologic Modeling Systems for Multiscale Analysis in the Midwest and Great Lakes Region

    Science.gov (United States)

    Hamlet, A. F.; Chiu, C. M.; Sharma, A.; Byun, K.; Hanson, Z.

    2016-12-01

    Physically based hydrologic modeling of surface and groundwater resources that can be flexibly and efficiently applied to support water resources policy/planning/management decisions at a wide range of spatial and temporal scales are greatly needed in the Midwest, where stakeholder access to such tools is currently a fundamental barrier to basic climate change assessment and adaptation efforts, and also the co-production of useful products to support detailed decision making. Based on earlier pilot studies in the Pacific Northwest Region, we are currently assembling a suite of end-to-end tools and resources to support various kinds of water resources planning and management applications across the region. One of the key aspects of these integrated tools is that the user community can access gridded products at any point along the end-to-end chain of models, looking backwards in time about 100 years (1915-2015), and forwards in time about 85 years using CMIP5 climate model projections. The integrated model is composed of historical and projected future meteorological data based on station observations and statistical and dynamically downscaled climate model output respectively. These gridded meteorological data sets serve as forcing data for the macro-scale VIC hydrologic model implemented over the Midwest at 1/16 degree resolution. High-resolution climate model (4km WRF) output provides inputs for the analyses of urban impacts, hydrologic extremes, agricultural impacts, and impacts to the Great Lakes. Groundwater recharge estimated by the surface water model provides input data for fine-scale and macro-scale groundwater models needed for specific applications. To highlight the multi-scale use of the integrated models in support of co-production of scientific information for decision making, we briefly describe three current case studies addressing different spatial scales of analysis: 1) Effects of climate change on the water balance of the Great Lakes, 2) Future

  1. A prototype framework for models of socio-hydrology: identification of key feedback loops and parameterisation approach

    Science.gov (United States)

    Elshafei, Y.; Sivapalan, M.; Tonts, M.; Hipsey, M. R.

    2014-06-01

    It is increasingly acknowledged that, in order to sustainably manage global freshwater resources, it is critical that we better understand the nature of human-hydrology interactions at the broader catchment system scale. Yet to date, a generic conceptual framework for building models of catchment systems that include adequate representation of socioeconomic systems - and the dynamic feedbacks between human and natural systems - has remained elusive. In an attempt to work towards such a model, this paper outlines a generic framework for models of socio-hydrology applicable to agricultural catchments, made up of six key components that combine to form the coupled system dynamics: namely, catchment hydrology, population, economics, environment, socioeconomic sensitivity and collective response. The conceptual framework posits two novel constructs: (i) a composite socioeconomic driving variable, termed the Community Sensitivity state variable, which seeks to capture the perceived level of threat to a community's quality of life, and acts as a key link tying together one of the fundamental feedback loops of the coupled system, and (ii) a Behavioural Response variable as the observable feedback mechanism, which reflects land and water management decisions relevant to the hydrological context. The framework makes a further contribution through the introduction of three macro-scale parameters that enable it to normalise for differences in climate, socioeconomic and political gradients across study sites. In this way, the framework provides for both macro-scale contextual parameters, which allow for comparative studies to be undertaken, and catchment-specific conditions, by way of tailored "closure relationships", in order to ensure that site-specific and application-specific contexts of socio-hydrologic problems can be accommodated. To demonstrate how such a framework would be applied, two socio-hydrological case studies, taken from the Australian experience, are presented

  2. Proving the ecosystem value through hydrological modelling

    Science.gov (United States)

    Dorner, W.; Spachinger, K.; Porter, M.; Metzka, R.

    2008-11-01

    Ecosystems provide valuable functions. Also natural floodplains and river structures offer different types of ecosystem functions such as habitat function, recreational area and natural detention. From an economic stand point the loss (or rehabilitation) of these natural systems and their provided natural services can be valued as a damage (or benefit). Consequently these natural goods and services must be economically valued in project assessments e.g. cost-benefit-analysis or cost comparison. Especially in smaller catchments and river systems exists significant evidence that natural flood detention reduces flood risk and contributes to flood protection. Several research projects evaluated the mitigating effect of land use, river training and the loss of natural flood plains on development, peak and volume of floods. The presented project analysis the hypothesis that ignoring natural detention and hydrological ecosystem services could result in economically inefficient solutions for flood protection and mitigation. In test areas, subcatchments of the Danube in Germany, a combination of hydrological and hydrodynamic models with economic evaluation techniques was applied. Different forms of land use, river structure and flood protection measures were assed and compared from a hydrological and economic point of view. A hydrodynamic model was used to simulate flows to assess the extent of flood affected areas and damages to buildings and infrastructure as well as to investigate the impacts of levees and river structure on a local scale. These model results provided the basis for an economic assessment. Different economic valuation techniques, such as flood damage functions, cost comparison method and substation-approach were used to compare the outcomes of different hydrological scenarios from an economic point of view and value the ecosystem service. The results give significant evidence that natural detention must be evaluated as part of flood mitigation projects

  3. Documentation for the hydrological discharge model

    Energy Technology Data Exchange (ETDEWEB)

    Hagemann, S.; Duemenil, L. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany)

    1998-10-01

    To improve the representation of hydrological land surface processes, which has so far been treated inadequately in global models of the atmospheric general circulation (GCMs), a model for the lateral waterflows from the continents into the ocean on the global scale was developed. The model describes the translation and retention of the lateral discharge as a function of the spatially distributed land surface characteristics that are globally available. Here, global scale refers to the resolution of 0.5 and lower, corresponding to a typical GCM gridbox area of about 2500 km{sup 2}. This model is called the Hydrological Discharge model or HD model. The HD model computes the discharge only at 0.5 resolution. A model input fields (runoff and drainage, see Sect. 3.1.) from the various GCM resolutions are interpolated to the same 0.5 grid. Thus, input fields may be used from any available resolution, if the corresponding interpolation routine to the 0.5 degree grid is provided. Since the HD model uses a time step of one day, a temporal resolution of one day is sufficient for the input fields. (orig.)

  4. Data Assimilation in Integrated and Distributed Hydrological Models

    DEFF Research Database (Denmark)

    Zhang, Donghua

    Integrated hydrological models are frequently used in water-related environmental resource management. With our better understanding of the hydrological processes and the improved computational power, hydrological models are becoming increasingly more complex as they integrate multiple hydrological...... to efficient use of traditional and new observational data in integrated hydrological models, as this technique can improve model prediction and reduce model uncertainty. The thesis investigates several challenges within the scope of data assimilation in integrated hydrological models. From the methodological...... point of view, different assimilation methodologies and techniques have been developed or customized to better serve hydrological assimilation. From the application point of view, real data and real-world complex catchments are used with the focus of investigating the models’ improvements with data...

  5. Data Assimilation in Integrated and Distributed Hydrological Models

    DEFF Research Database (Denmark)

    Zhang, Donghua

    Integrated hydrological models are frequently used in water-related environmental resource management. With our better understanding of the hydrological processes and the improved computational power, hydrological models are becoming increasingly more complex as they integrate multiple hydrological...... processes and provide simulations in refined temporal and spatial resolutions. Recent developments in measurement and sensor technologies have significantly improved the coverage, quality, frequency and diversity of hydrological observations. Data assimilation provides a great potential in relation...... to efficient use of traditional and new observational data in integrated hydrological models, as this technique can improve model prediction and reduce model uncertainty. The thesis investigates several challenges within the scope of data assimilation in integrated hydrological models. From the methodological...

  6. An integrated crop and hydrologic modeling system to estimate hydrologic impacts of crop irrigation demands

    Science.gov (United States)

    R.T. McNider; C. Handyside; K. Doty; W.L. Ellenburg; J.F. Cruise; J.R. Christy; D. Moss; V. Sharda; G. Hoogenboom; Peter Caldwell

    2015-01-01

    The present paper discusses a coupled gridded crop modeling and hydrologic modeling system that can examine the benefits of irrigation and costs of irrigation and the coincident impact of the irrigation water withdrawals on surface water hydrology. The system is applied to the Southeastern U.S. The system tools to be discussed include a gridded version (GriDSSAT) of...

  7. Robust estimation of hydrological model parameters

    Directory of Open Access Journals (Sweden)

    A. Bárdossy

    2008-11-01

    Full Text Available The estimation of hydrological model parameters is a challenging task. With increasing capacity of computational power several complex optimization algorithms have emerged, but none of the algorithms gives a unique and very best parameter vector. The parameters of fitted hydrological models depend upon the input data. The quality of input data cannot be assured as there may be measurement errors for both input and state variables. In this study a methodology has been developed to find a set of robust parameter vectors for a hydrological model. To see the effect of observational error on parameters, stochastically generated synthetic measurement errors were applied to observed discharge and temperature data. With this modified data, the model was calibrated and the effect of measurement errors on parameters was analysed. It was found that the measurement errors have a significant effect on the best performing parameter vector. The erroneous data led to very different optimal parameter vectors. To overcome this problem and to find a set of robust parameter vectors, a geometrical approach based on Tukey's half space depth was used. The depth of the set of N randomly generated parameters was calculated with respect to the set with the best model performance (Nash-Sutclife efficiency was used for this study for each parameter vector. Based on the depth of parameter vectors, one can find a set of robust parameter vectors. The results show that the parameters chosen according to the above criteria have low sensitivity and perform well when transfered to a different time period. The method is demonstrated on the upper Neckar catchment in Germany. The conceptual HBV model was used for this study.

  8. Damage Prediction Using Several Types of Macro-scale Damage Models in Different Cold Wire Production Lines

    OpenAIRE

    Cao, Trong-Son; Montmitonnet, Pierre; Bouchard, Pierre-Olivier; Bobadilla, Christian; Vachey, Christophe

    2014-01-01

    International audience; The purpose of the present paper is to show how and to what extent the introduction of refined, shear sensitive models improves on previous ones, based on triaxiality only, for the phenomenological description of ductile damage in bulk cold metal forming processes. Wire-drawing and wire rolling are taken as examples. A set of mechanical tests has been conducted: round bar tension, notched bar tension, plane strain tension, and torsion for pure shear deformation. Both c...

  9. Modelling Hydrological Consequences of Climate Change-Progress and Challenges

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The simulation of hydrological consequences of climate change has received increasing attention from the hydrology and land-surface modelling communities. There have been many studies of climate-change effects on hydrology and water resources which usually consist of three steps: (1) use of general circulation models (GCMs) to provide future global climate scenarios under the effect of increasing greenhouse gases,(2) use of downscaling techniques (both nested regional climate models, RCMs, and statistical methods)for "downscaling" the GCM output to the scales compatible with hydrological models, and (3) use of hydrologic models to simulate the effects of climate change on hydrological regimes at various scales.Great progress has been achieved in all three steps during the past few years, however, large uncertainties still exist in every stage of such study. This paper first reviews the present achievements in this field and then discusses the challenges for future studies of the hydrological impacts of climate change.

  10. Uncertainty analysis in statistical modeling of extreme hydrological events

    NARCIS (Netherlands)

    Xu, Yue-Ping; Booij, Martijn J.; Tong, Yang-Bin

    2010-01-01

    With the increase of both magnitude and frequency of hydrological extreme events such as drought and flooding, the significance of adequately modeling hydrological extreme events is fully recognized. Estimation of extreme rainfall/flood for various return periods is of prime importance for hydrologi

  11. Embedding complex hydrology in the climate system - towards fully coupled climate-hydrology models

    DEFF Research Database (Denmark)

    Butts, M.; Rasmussen, S.H.; Ridler, M.

    2013-01-01

    Motivated by the need to develop better tools to understand the impact of future management and climate change on water resources, we present a set of studies with the overall aim of developing a fully dynamic coupling between a comprehensive hydrological model, MIKE SHE, and a regional climate...... distributed parameters using satellite remote sensing. Secondly, field data are used to investigate the effects of model resolution and parameter scales for use in a coupled model. Finally, the development of the fully coupled climate-hydrology model is described and some of the challenges associated...... with coupling models for hydrological processes on sub-grid scales of the regional climate model are presented....

  12. A Smallholder Socio-hydrological Modelling Framework

    Science.gov (United States)

    Pande, S.; Savenije, H.; Rathore, P.

    2014-12-01

    Small holders are farmers who own less than 2 ha of farmland. They often have low productivity and thus remain at subsistence level. A fact that nearly 80% of Indian farmers are smallholders, who merely own a third of total farmlands and belong to the poorest quartile, but produce nearly 40% of countries foodgrains underlines the importance of understanding the socio-hydrology of a small holder. We present a framework to understand the socio-hydrological system dynamics of a small holder. It couples the dynamics of 6 main variables that are most relevant at the scale of a small holder: local storage (soil moisture and other water storage), capital, knowledge, livestock production, soil fertility and grass biomass production. The model incorporates rule-based adaptation mechanisms (for example: adjusting expenditures on food and fertilizers, selling livestocks etc.) of small holders when they face adverse socio-hydrological conditions, such as low annual rainfall, higher intra-annual variability in rainfall or variability in agricultural prices. It allows us to study sustainability of small holder farming systems under various settings. We apply the framework to understand the socio-hydrology of small holders in Aurangabad, Maharashtra, India. This district has witnessed suicides of many sugarcane farmers who could not extricate themselves out of the debt trap. These farmers lack irrigation and are susceptible to fluctuating sugar prices and intra-annual hydroclimatic variability. This presentation discusses two aspects in particular: whether government interventions to absolve the debt of farmers is enough and what is the value of investing in local storages that can buffer intra-annual variability in rainfall and strengthening the safety-nets either by creating opportunities for alternative sources of income or by crop diversification.

  13. Global evaluation of runoff from 10 state-of-the-art hydrological models

    Science.gov (United States)

    Beck, Hylke E.; van Dijk, Albert I. J. M.; de Roo, Ad; Dutra, Emanuel; Fink, Gabriel; Orth, Rene; Schellekens, Jaap

    2017-06-01

    Observed streamflow data from 966 medium sized catchments (1000-5000 km2) around the globe were used to comprehensively evaluate the daily runoff estimates (1979-2012) of six global hydrological models (GHMs) and four land surface models (LSMs) produced as part of tier-1 of the eartH2Observe project. The models were all driven by the WATCH Forcing Data ERA-Interim (WFDEI) meteorological dataset, but used different datasets for non-meteorologic inputs and were run at various spatial and temporal resolutions, although all data were re-sampled to a common 0. 5° spatial and daily temporal resolution. For the evaluation, we used a broad range of performance metrics related to important aspects of the hydrograph. We found pronounced inter-model performance differences, underscoring the importance of hydrological model uncertainty in addition to climate input uncertainty, for example in studies assessing the hydrological impacts of climate change. The uncalibrated GHMs were found to perform, on average, better than the uncalibrated LSMs in snow-dominated regions, while the ensemble mean was found to perform only slightly worse than the best (calibrated) model. The inclusion of less-accurate models did not appreciably degrade the ensemble performance. Overall, we argue that more effort should be devoted on calibrating and regionalizing the parameters of macro-scale models. We further found that, despite adjustments using gauge observations, the WFDEI precipitation data still contain substantial biases that propagate into the simulated runoff. The early bias in the spring snowmelt peak exhibited by most models is probably primarily due to the widespread precipitation underestimation at high northern latitudes.

  14. Physical models for classroom teaching in hydrology

    Science.gov (United States)

    Rodhe, A.

    2012-09-01

    Hydrology teaching benefits from the fact that many important processes can be illustrated and explained with simple physical models. A set of mobile physical models has been developed and used during many years of lecturing at basic university level teaching in hydrology. One model, with which many phenomena can be demonstrated, consists of a 1.0-m-long plexiglass container containing an about 0.25-m-deep open sand aquifer through which water is circulated. The model can be used for showing the groundwater table and its influence on the water content in the unsaturated zone and for quantitative determination of hydraulic properties such as the storage coefficient and the saturated hydraulic conductivity. It is also well suited for discussions on the runoff process and the significance of recharge and discharge areas for groundwater. The flow paths of water and contaminant dispersion can be illustrated in tracer experiments using fluorescent or colour dye. This and a few other physical models, with suggested demonstrations and experiments, are described in this article. The finding from using models in classroom teaching is that it creates curiosity among the students, promotes discussions and most likely deepens the understanding of the basic processes.

  15. Hybrid Modelling Approach to Prairie hydrology: Fusing Data-driven and Process-based Hydrological Models

    Science.gov (United States)

    Mekonnen, B.; Nazemi, A.; Elshorbagy, A.; Mazurek, K.; Putz, G.

    2012-04-01

    Modeling the hydrological response in prairie regions, characterized by flat and undulating terrain, and thus, large non-contributing areas, is a known challenge. The hydrological response (runoff) is the combination of the traditional runoff from the hydrologically contributing area and the occasional overflow from the non-contributing area. This study provides a unique opportunity to analyze the issue of fusing the Soil and Water Assessment Tool (SWAT) and Artificial Neural Networks (ANNs) in a hybrid structure to model the hydrological response in prairie regions. A hybrid SWAT-ANN model is proposed, where the SWAT component and the ANN module deal with the effective (contributing) area and the non-contributing area, respectively. The hybrid model is applied to the case study of Moose Jaw watershed, located in southern Saskatchewan, Canada. As an initial exploration, a comparison between ANN and SWAT models is established based on addressing the daily runoff (streamflow) prediction accuracy using multiple error measures. This is done to identify the merits and drawbacks of each modeling approach. It has been found out that the SWAT model has better performance during the low flow periods but with degraded efficiency during periods of high flows. The case is different for the ANN model as ANNs exhibit improved simulation during high flow periods but with biased estimates during low flow periods. The modelling results show that the new hybrid SWAT-ANN model is capable of exploiting the strengths of both SWAT and ANN models in an integrated framrwork. The new hybrid SWAT-ANN model simulates daily runoff quite satisfactorily with NSE measures of 0.80 and 0.83 during calibration and validation periods, respectively. Furthermore, an experimental assessment was performed to identify the effects of the ANN training method on the performance of the hybrid model as well as the parametric identifiability. Overall, the results obtained in this study suggest that the fusion

  16. From Microscales to Macroscales in 3D: Selfconsistent Equation of State for Supernova and Neutron Star Models

    CERN Document Server

    Newton, W G; Mezzacappa, A

    2006-01-01

    First results from a fully self-consistent, temperature-dependent equation of state that spans the whole density range of neutron stars and supernova cores are presented. The equation of state (EoS) is calculated using a mean-field Hartree-Fock method in three dimensions (3D). The nuclear interaction is represented by the phenomenological Skyrme model in this work, but the EoS can be obtained in our framework for any suitable form of the nucleon-nucleon effective interaction. The scheme we employ naturally allows effects such as (i) neutron drip, which results in an external neutron gas, (ii) the variety of exotic nuclear shapes expected for extremely neutron heavy nuclei, and (iii) the subsequent dissolution of these nuclei into nuclear matter. In this way, the equation of state is calculated across phase transitions without recourse to interpolation techniques between density regimes described by different physical models. EoS tables are calculated in the wide range of densities, temperature and proton/neut...

  17. Hydrology under change: an evaluation protocol to investigate how hydrological models deal with changing catchments

    Science.gov (United States)

    G. Thirel; V. Andreassian; C. Perrin; J.-N. Audouy; L. Berthet; Pamela Edwards; N. Folton; C. Furusho; A. Kuentz; J. Lerat; G. Lindstrom; E. Martin; T. Mathevet; R. Merz; J. Parajka; D. Ruelland; J. Vaze

    2015-01-01

    Testing hydrological models under changing conditions is essential to evaluate their ability to cope with changing catchments and their suitability for impact studies. With this perspective in mind, a workshop dedicated to this issue was held at the 2013 General Assembly of the International Association of Hydrological Sciences (IAHS) in Göteborg, Sweden, in July 2013...

  18. The Chena River Watershed Hydrology Model

    Science.gov (United States)

    2012-04-01

    ER D C/ CR R EL T R -1 2 -1 The Chena River Watershed Hydrology Model C ol d R eg io n s R es ea rc h an d E n gi n ee ri n g La...14 Table 6. Estimated monthly ET using Hargreaves method and pan...using water balance method A generalized water balance for the Chena River watershed can be written as mS P S ET R     (3) where P

  19. Subglacial Hydrology Model Intercomparison Project (SHMIP)

    Science.gov (United States)

    Werder, Mauro A.; de Fleurian, Basile; Creyts, Timothy T.; Damsgaard, Anders; Delaney, Ian; Dow, Christine F.; Gagliardini, Olivier; Hoffman, Matthew J.; Seguinot, Julien; Sommers, Aleah; Irarrazaval Bustos, Inigo; Downs, Jakob

    2017-04-01

    The SHMIP project is the first intercomparison project of subglacial drainage models (http://shmip.bitbucket.org). Its synthetic test suites and evaluation were designed such that any subglacial hydrology model producing effective pressure can participate. In contrast to ice deformation, the physical processes of subglacial hydrology (which in turn impacts basal sliding of glaciers) are poorly known. A further complication is that different glacial and geological settings can lead to different drainage physics. The aim of the project is therefore to qualitatively compare the outputs of the participating models for a wide range of water forcings and glacier geometries. This will allow to put existing studies, which use different drainage models, into context and will allow new studies to select the most suitable model for the problem at hand. We present the results from the just completed intercomparison exercise. Twelve models participated: eight 2D and four 1D models; nine include both an efficient and inefficient system, the other three one of the systems; all but two models use R-channels as efficient system, and/or a linked-cavity like inefficient system, one exception uses porous layers with different characteristic for each of the systems, the other exception is based on canals. The main variable used for the comparison is effective pressure, as that is a direct proxy for basal sliding of glaciers. The models produce large differences in the effective pressure fields, in particular for higher water input scenarios. This shows that the selection of a subglacial drainage model will likely impact the conclusions of a study significantly.

  20. A Large-Scale, High-Resolution Hydrological Model Parameter Data Set for Climate Change Impact Assessment for the Conterminous US

    Energy Technology Data Exchange (ETDEWEB)

    Oubeidillah, Abdoul A [ORNL; Kao, Shih-Chieh [ORNL; Ashfaq, Moetasim [ORNL; Naz, Bibi S [ORNL; Tootle, Glenn [University of Alabama, Tuscaloosa

    2014-01-01

    To extend geographical coverage, refine spatial resolution, and improve modeling efficiency, a computation- and data-intensive effort was conducted to organize a comprehensive hydrologic dataset with post-calibrated model parameters for hydro-climate impact assessment. Several key inputs for hydrologic simulation including meteorologic forcings, soil, land class, vegetation, and elevation were collected from multiple best-available data sources and organized for 2107 hydrologic subbasins (8-digit hydrologic units, HUC8s) in the conterminous United States at refined 1/24 (~4 km) spatial resolution. Using high-performance computing for intensive model calibration, a high-resolution parameter dataset was prepared for the macro-scale Variable Infiltration Capacity (VIC) hydrologic model. The VIC simulation was driven by DAYMET daily meteorological forcing and was calibrated against USGS WaterWatch monthly runoff observations for each HUC8. The results showed that this new parameter dataset may help reasonably simulate runoff at most US HUC8 subbasins. Based on this exhaustive calibration effort, it is now possible to accurately estimate the resources required for further model improvement across the entire conterminous United States. We anticipate that through this hydrologic parameter dataset, the repeated effort of fundamental data processing can be lessened, so that research efforts can emphasize the more challenging task of assessing climate change impacts. The pre-organized model parameter dataset will be provided to interested parties to support further hydro-climate impact assessment.

  1. Plant growth simulation for landscape scale hydrologic modeling

    Science.gov (United States)

    Landscape scale hydrologic models can be improved by incorporating realistic, process-oriented plant models for simulating crops, grasses, and woody species. The objective of this project was to present some approaches for plant modeling applicable to hydrologic models like SWAT that can affect the...

  2. Operational use of distributed hydrological models. Experiences and challenges at a Norwegian hydropower company (Agder Energi).

    Science.gov (United States)

    Viggo Matheussen, Bernt; Andresen, Arne; Weisser, Claudia

    2014-05-01

    The Scandinavian hydropower industry has traditionally adopted the lumped conceptual hydrological model - HBV, as the tool for producing forecasts of inflows and mountain snow packs. Such forecasting systems - based on lumped conceptual models - have several drawbacks. Firstly, a lumped model does not produce spatial data, and comparisons with remote sensed snow cover data (which are now available) are complicated. Secondly, several climate parameters such as wind speed are now becoming more available and can potentially improve forecasts due to improved estimates of precipitation gauge efficiency, and more physically correct calculation of turbulent heat fluxes. At last, when the number of catchments increases, it is cumbersome and slow to run multiple hydrology models compared to running one model for all catchments. With the drawbacks of the lumped hydrology models in mind, and with inspiration from other forecasting systems using distributed models, Agder Energy decided to develop a forecasting system applying a physically based distributed model. In this paper we describe an operational inflow and snowpack forecast system developed for the Scandinavian mountain range. The system applies a modern macroscale land surface hydrology model (VIC) which in combination with historical climate data and weather predictions can be used to produce both short-term, and seasonal forecasts of inflow and mountain snowpack. Experiences with the forecast system are illustrated using results from individual subcatchments as well as aggregated regional forecasts of inflow and snowpack. Conversion of water volumes into effective energy inflow are also presented and compared to data from the Nordic hydropower system. Further on, we document several important "lessons-learned" that may be of interest to the hydrological research community. Specifically a semi-automatic data cleansing system combining spatial and temporal visualization techniques with statistical procedures are

  3. Hydrologic connectivity: Quantitative assessments of hydrologic-enforced drainage structures in an elevation model

    Science.gov (United States)

    Poppenga, Sandra; Worstell, Bruce B.

    2016-01-01

    Elevation data derived from light detection and ranging present challenges for hydrologic modeling as the elevation surface includes bridge decks and elevated road features overlaying culvert drainage structures. In reality, water is carried through these structures; however, in the elevation surface these features impede modeled overland surface flow. Thus, a hydrologically-enforced elevation surface is needed for hydrodynamic modeling. In the Delaware River Basin, hydrologic-enforcement techniques were used to modify elevations to simulate how constructed drainage structures allow overland surface flow. By calculating residuals between unfilled and filled elevation surfaces, artificially pooled depressions that formed upstream of constructed drainage structure features were defined, and elevation values were adjusted by generating transects at the location of the drainage structures. An assessment of each hydrologically-enforced drainage structure was conducted using field-surveyed culvert and bridge coordinates obtained from numerous public agencies, but it was discovered the disparate drainage structure datasets were not comprehensive enough to assess all remotely located depressions in need of hydrologic-enforcement. Alternatively, orthoimagery was interpreted to define drainage structures near each depression, and these locations were used as reference points for a quantitative hydrologic-enforcement assessment. The orthoimagery-interpreted reference points resulted in a larger corresponding sample size than the assessment between hydrologic-enforced transects and field-surveyed data. This assessment demonstrates the viability of rules-based hydrologic-enforcement that is needed to achieve hydrologic connectivity, which is valuable for hydrodynamic models in sensitive coastal regions. Hydrologic-enforced elevation data are also essential for merging with topographic/bathymetric elevation data that extend over vulnerable urbanized areas and dynamic coastal

  4. Performance Assessment of Hydrological Models Considering Acceptable Forecast Error Threshold

    Directory of Open Access Journals (Sweden)

    Qianjin Dong

    2015-11-01

    Full Text Available It is essential to consider the acceptable threshold in the assessment of a hydrological model because of the scarcity of research in the hydrology community and errors do not necessarily cause risk. Two forecast errors, including rainfall forecast error and peak flood forecast error, have been studied based on the reliability theory. The first order second moment (FOSM and bound methods are used to identify the reliability. Through the case study of the Dahuofang (DHF Reservoir, it is shown that the correlation between these two errors has great influence on the reliability index of hydrological model. In particular, the reliability index of the DHF hydrological model decreases with the increasing correlation. Based on the reliability theory, the proposed performance evaluation framework incorporating the acceptable forecast error threshold and correlation among the multiple errors can be used to evaluate the performance of a hydrological model and to quantify the uncertainties of a hydrological model output.

  5. Simulating Land Surface Hydrology at a 30-meter Spatial Resolution over the Contiguous United States

    Science.gov (United States)

    Wood, E. F.; Pan, M.; Cai, X.; Chaney, N.

    2016-12-01

    Big data, high performance computing, and recent advances in hydrologic similarity present a unique opportunity for macroscale hydrology: the land surface hydrology can be modeled at field scales over continental extents while ensuring computational efficiency to enable robust ensemble frameworks. In this presentation we will illustrate this potential breakthrough in macroscale hydrology by discussing results from a 30-meter simulation over the contiguous United States using the HydroBlocks land surface model. HydroBlocks is a novel land surface model that represents field-scale spatial heterogeneity of land surface processes through interacting hydrologic response units (HRUs) [Chaney et al., 2016]. The model is a coupling between the Noah-MP land surface model and the Dynamic TOPMODEL hydrologic model. The HRUs are defined by clustering proxies of the drivers of spatial heterogeneity using hyperresolution land data. For the simulations over CONUS, HydroBlocks is run at every HUC10 catchment using 100 HRUs per catchment between 2004 and 2014. The simulations are forced with the 4 km Stage IV radar rainfall product and a spatially downscaled version of NLDAS-2. We will show how this approach to macroscale hydrology ensures computational efficiency while providing field-scale hydrologic information over continental extents. We will illustrate how this approach provides a novel approach in both the application and validation of macroscale land surface and hydrologic models. Finally, using these results, we will discuss the important role that big data and high performance computing can play in providing solutions to longstanding challenges to not only flood and drought monitoring systems but also to numerical weather prediction, seasonal forecasting, and climate prediction. References Chaney, N., P. Metcalfe, and E. F. Wood (2016), HydroBlocks: A Field-scale Resolving Land Surface Model for Application Over Continental Extents, Hydrological Processes, (in press.)

  6. Calibration of hydrological model with programme PEST

    Science.gov (United States)

    Brilly, Mitja; Vidmar, Andrej; Kryžanowski, Andrej; Bezak, Nejc; Šraj, Mojca

    2016-04-01

    PEST is tool based on minimization of an objective function related to the root mean square error between the model output and the measurement. We use "singular value decomposition", section of the PEST control file, and Tikhonov regularization method for successfully estimation of model parameters. The PEST sometimes failed if inverse problems were ill-posed, but (SVD) ensures that PEST maintains numerical stability. The choice of the initial guess for the initial parameter values is an important issue in the PEST and need expert knowledge. The flexible nature of the PEST software and its ability to be applied to whole catchments at once give results of calibration performed extremely well across high number of sub catchments. Use of parallel computing version of PEST called BeoPEST was successfully useful to speed up calibration process. BeoPEST employs smart slaves and point-to-point communications to transfer data between the master and slaves computers. The HBV-light model is a simple multi-tank-type model for simulating precipitation-runoff. It is conceptual balance model of catchment hydrology which simulates discharge using rainfall, temperature and estimates of potential evaporation. Version of HBV-light-CLI allows the user to run HBV-light from the command line. Input and results files are in XML form. This allows to easily connecting it with other applications such as pre and post-processing utilities and PEST itself. The procedure was applied on hydrological model of Savinja catchment (1852 km2) and consists of twenty one sub-catchments. Data are temporary processed on hourly basis.

  7. Plant adaptive behaviour in hydrological models (Invited)

    Science.gov (United States)

    van der Ploeg, M. J.; Teuling, R.

    2013-12-01

    Models that will be able to cope with future precipitation and evaporation regimes need a solid base that describes the essence of the processes involved [1]. Micro-behaviour in the soil-vegetation-atmosphere system may have a large impact on patterns emerging at larger scales. A complicating factor in the micro-behaviour is the constant interaction between vegetation and geology in which water plays a key role. The resilience of the coupled vegetation-soil system critically depends on its sensitivity to environmental changes. As a result of environmental changes vegetation may wither and die, but such environmental changes may also trigger gene adaptation. Constant exposure to environmental stresses, biotic or abiotic, influences plant physiology, gene adaptations, and flexibility in gene adaptation [2-6]. Gene expression as a result of different environmental conditions may profoundly impact drought responses across the same plant species. Differences in response to an environmental stress, has consequences for the way species are currently being treated in models (single plant to global scale). In particular, model parameters that control root water uptake and plant transpiration are generally assumed to be a property of the plant functional type. Assigning plant functional types does not allow for local plant adaptation to be reflected in the model parameters, nor does it allow for correlations that might exist between root parameters and soil type. Models potentially provide a means to link root water uptake and transport to large scale processes (e.g. Rosnay and Polcher 1998, Feddes et al. 2001, Jung 2010), especially when powered with an integrated hydrological, ecological and physiological base. We explore the experimental evidence from natural vegetation to formulate possible alternative modeling concepts. [1] Seibert, J. 2000. Multi-criteria calibration of a conceptual runoff model using a genetic algorithm. Hydrology and Earth System Sciences 4(2): 215

  8. Combined effects of climate models, hydrological model structures and land use scenarios on hydrological impacts of climate change

    DEFF Research Database (Denmark)

    Karlsson, Ida B.; Sonnenborg, Torben O.; Refsgaard, Jens Christian;

    2016-01-01

    Impact studies of the hydrological response of future climate change are important for the water authorities when risk assessment, management and adaptation to a changing climate are carried out. The objective of this study was to model the combined effect of land use and climate changes...... use scenarios. The results revealed that even though the hydrological models all showed similar performance during calibration, the mean discharge response to climate change varied up to 30%, and the variations were even higher for extreme events (1th and 99th percentile). Land use changes appeared...... to cause little change in mean hydrological responses and little variation between hydrological models. Differences in hydrological model responses to land use were, however, significant for extremes due to dissimilarities in hydrological model structure and process equations. The climate model choice...

  9. Combined effects of climate models, hydrological model structures and land use scenarios on hydrological impacts of climate change

    Science.gov (United States)

    Karlsson, Ida B.; Sonnenborg, Torben O.; Refsgaard, Jens Christian; Trolle, Dennis; Børgesen, Christen Duus; Olesen, Jørgen E.; Jeppesen, Erik; Jensen, Karsten H.

    2016-04-01

    Impact studies of the hydrological response of future climate change are important for the water authorities when risk assessment, management and adaptation to a changing climate are carried out. The objective of this study was to model the combined effect of land use and climate changes on hydrology for a 486 km2 catchment in Denmark and to evaluate the sensitivity of the results to the choice of hydrological model. Three hydrological models, NAM, SWAT and MIKE SHE, were constructed and calibrated using similar methods. Each model was forced with results from four climate models and four land use scenarios. The results revealed that even though the hydrological models all showed similar performance during calibration, the mean discharge response to climate change varied up to 30%, and the variations were even higher for extreme events (1th and 99th percentile). Land use changes appeared to cause little change in mean hydrological responses and little variation between hydrological models. Differences in hydrological model responses to land use were, however, significant for extremes due to dissimilarities in hydrological model structure and process equations. The climate model choice remained the dominant factor for mean discharge, low and high flows as well as hydraulic head at the end of the century.

  10. The evolution of process-based hydrologic models

    NARCIS (Netherlands)

    Clark, Martyn P.; Bierkens, Marc F.P.; Samaniego, Luis; Woods, Ross A.; Uijlenhoet, Remko; Bennett, Katrina E.; Pauwels, Valentijn R.N.; Cai, Xitian; Wood, Andrew W.; Peters-Lidard, Christa D.

    2017-01-01

    The diversity in hydrologic models has historically led to great controversy on the "correct" approach to process-based hydrologic modeling, with debates centered on the adequacy of process parameterizations, data limitations and uncertainty, and computational constraints on model analysis. In this

  11. RHydro - Hydrological models and tools to represent and analyze hydrological data in R

    Science.gov (United States)

    Reusser, D. E.; Buytaert, W.; Vitolo, C.

    2012-04-01

    In hydrology, basic equations and procedures keep being implemented from scratch by scientist, with the potential for errors and inefficiency. The use of libraries can overcome these problems. As an example, hydrological libraries could contain: 1. Major representations of hydrological processes such as infiltration, sub-surface runoff and routing algorithms. 2. Scaling functions, for instance to combine remote sensing precipitation fields with rain gauge data 3. Data consistency checks 4. Performance measures. Here we present a beginning for such a library implemented in the high level data programming language R. Currently, Top-model, the abc-Model, HBV, a multi-model ensamble called FUSE, data import routines for WaSiM-ETH as well basic visualization and evaluation tools are implemented. Care is taken to make functions and models compatible with other existing frameworks in hydrology, such as for example Hydromad.

  12. Analysing the temporal dynamics of model performance for hydrological models

    NARCIS (Netherlands)

    Reusser, D.E.; Blume, T.; Schaefli, B.; Zehe, E.

    2009-01-01

    The temporal dynamics of hydrological model performance gives insights into errors that cannot be obtained from global performance measures assigning a single number to the fit of a simulated time series to an observed reference series. These errors can include errors in data, model parameters, or m

  13. A prototype framework for models of socio-hydrology: identification of key feedback loops with application to two Australian case-studies

    Directory of Open Access Journals (Sweden)

    Y. Elshafei

    2014-01-01

    Full Text Available It is increasingly acknowledged that, in order to sustainably manage global freshwater resources, it is critical that we better understand the nature of human-hydrology interactions at the broader catchment system-scale. Yet to date, a generic conceptual framework for building models of catchment systems that include adequate representation of socioeconomic systems – and the dynamic feedbacks between human and natural systems – has remained elusive. In an attempt to work towards such a model, this paper outlines a generic framework for a model of socio-hydrology that posits a novel construct, a composite Community Sensitivity state variable, as a key link to elucidate the drivers of behavioural response in a hydrological context. The framework provides for both macro-scale contextual parameters, which allow it to be applied across climate, socioeconomic and political gradients, and catchment-specific conditions, by way of tailored "closure relationships", in order to ensure that site-specific and application-specific contexts of socio-hydrologic problems can be accommodated. To demonstrate how such a framework would be applied, two different socio-hydrological case studies, taken from the Australian experience, are presented and discussed. It is envisioned that the application of this framework across study sites and gradients will aid in developing our understanding of the fundamental interactions and feedbacks in such complex human-hydrology systems, and allow hydrologists to participate in the growing field of social-ecological systems modelling.

  14. Monthly Hydrological Model Evaluation through Mapping the Hydrological Pattern to Information Space

    Science.gov (United States)

    Pan, B.; Cong, Z.

    2014-12-01

    Conceptual and stochastic monthly hydrological models have been widely used for climatic change impact exploration and long-range stream flow forecast. With disparate philosophies and different but insufficient inputs, most of the existing models are capable of generating satisfying outputs, which reveals a relatively robust idiosyncrasy of hydrological pattern over monthly time scale. This research uses the epistemic-aleatory uncertainties evaluation framework to examine the information source sink terms and flows of 6 conceptual monthly water balance models and a seasonal autoregressive stochastic hydrologic model over 19 basins in Jiangxi Province, China and the experiment basins of MOPEX project. By using the stream technique of Lisp, we constructed two programming paradigms into which the hydrological models mentioned above could be fitted. We focus on detecting and explaining the best achievable predictive performances and data-revealed insufficient of the models in each paradigm, especially the hydrological meaning of the iteration variables in these models. Finally, we make an attempt to compare and connect these two paradigms against the backdrop of algorithmic information theory to help us form a better understanding of monthly hydrological pattern.

  15. iTree-Hydro: Snow hydrology update for the urban forest hydrology model

    Science.gov (United States)

    Yang Yang; Theodore A. Endreny; David J. Nowak

    2011-01-01

    This article presents snow hydrology updates made to iTree-Hydro, previously called the Urban Forest Effects—Hydrology model. iTree-Hydro Version 1 was a warm climate model developed by the USDA Forest Service to provide a process-based planning tool with robust water quantity and quality predictions given data limitations common to most urban areas. Cold climate...

  16. Hydrologic modeling of pathogen fate and transport.

    Science.gov (United States)

    Dorner, Sarah M; Anderson, William B; Slawson, Robin M; Kouwen, Nicholas; Huck, Peter M

    2006-08-01

    A watershed-scale fate and transport model has been developed for Escherichia coli and several waterborne pathogens: Cryptosporidiumspp., Giardiaspp., Campylobacter spp, and E. coli O157:H7. The objectives were to determine the primary sources of pathogenic contamination in a watershed used for drinking water supply and to gain a greater understanding of the factors that most influence their survival and transport. To predict the levels of indicator bacteria and pathogens in surface water, an existing hydrologic model, WATFLOOD, was augmented for pathogen transport and tested on a watershed in Southwestern Ontario, Canada. The pathogen model considered transport as a result of overland flow, subsurface flow to tile drainage systems, and in-stream routing. The model predicted that most microorganisms entering the stream from land-based sources enter the stream from tile drainage systems rather than overland transport. Although the model predicted overland transport to be rare, when it occurred, it corresponded to the highest observed and modeled microbial concentrations. Furthermore, rapid increases in measured E. coli concentrations during storm events suggested that the resuspension of microorganisms from stream sediments may be of equal or greater importance than land-based sources of pathogens.

  17. A hydrological model of New Zealand

    Science.gov (United States)

    Woods, R. A.; Tarboton, D. G.; Ibbitt, R. P.; Wild, M.; Henderson, R. D.; Turner, R.

    2003-04-01

    We present initial results from a hydrological model of New Zealand, using Topnet, a variant of TOPMODEL, linked to a kinematic wave channel network routing algorithm. This model run uses daily timesteps for the period 1985-2001, and subdivides the country into approximately 35,000 sub-catchments of 7-10 sq km each. The sub-catchments are linked by 55,000 river reaches, which route sub-catchment runoff. The model subcatchments and reaches are defined automatically by DEM analyses, and initial estimates of model parameters are defined by GIS overlay, coupled with purpose-built model assembly code, and lookup tables for model parameters. A daily simulation for 1 year over New Zealand takes two hours on a standard desktop computer. The model is forced by gridded daily rainfall and temperature data, and it calculates daily water balance for each of the sub-catchments (rain, evaporation, throughfall, infiltration, soil drainage, surface runoff, subsurface runoff, and changes in storage in the canopy, root zone, and saturated storage), as well as daily flows in each river reach. The model as currently implemented does not include snow, glaciers, or deep groundwater flow (i.e. across sub-catchment boundaries). The first applications of the model are for developing an annual water balance of New Zealand for the period 1994-2001, at the regional scale, and for driving a high-spatial resolution, daily time-stepping national erosion model. We are moving to further applications for water resource modeling (e.g. impact of abstraction and/or storage), and for flood forecasting, using hourly rainfall from a mesoscale atmospheric model.

  18. A question driven socio-hydrological modeling process

    Directory of Open Access Journals (Sweden)

    M. Garcia

    2015-08-01

    Full Text Available Human and hydrological systems are coupled: human activity impacts the hydrological cycle and hydrological conditions can, but do not always, trigger changes in human systems. Traditional modeling approaches with no feedback between hydrological and human systems typically cannot offer insight into how different patterns of natural variability or human induced changes may propagate through this coupled system. Modeling of coupled human and hydrological systems, also called socio-hydrological systems, recognizes the potential for humans to transform hydrological systems and for hydrological conditions to influence human behavior. However, this coupling introduces new challenges and existing literature does not offer clear guidance regarding the choice of modeling structure, scope, and detail. A shared understanding of important processes within the field is often used to develop hydrological models, but there is no such consensus on the relevant processes in socio-hydrological systems. Here we present a question driven process to address these challenges. Such an approach allows modeling structure, scope, and detail to remain contingent and adaptive to the question context. We demonstrate its utility by exploring a question: what is the impact of reservoir operation policy on the reliability of water supply for a growing city? Our example model couples hydrological and human systems by linking the rate of demand decreases to the past reliability to compare standard operating policy (SOP with hedging policy (HP. The model shows that reservoir storage acts both as a buffer for variability and as a delay triggering oscillations around a sustainable level of demand. HP reduces the threshold for action thereby decreasing the delay and the oscillation effect. As a result per capita demand decreases during periods of water stress are more frequent but less drastic and the additive effect of small adjustments decreases the tendency of the system to

  19. Modeling the hydrologic impacts of forest harvesting on Florida flatwoods

    Science.gov (United States)

    Ge Sun; Hans Rierkerk; Nicholas B. Comerford

    1998-01-01

    The great temporal and spatial variability of pine flatwoods hydrology suggests traditional short-term field methods may not be effective in evaluating the hydrologic effects of forest management. The flatwoods model was developed, calibrated and validated specifically for the cypress wetland-pine upland landscape. The model was applied to two typical flatwoods sites...

  20. An integrated hydrologic modeling framework for coupling SWAT with MODFLOW

    Science.gov (United States)

    The Soil and Water Assessment Tool (SWAT), MODFLOW, and Energy Balance based Evapotranspiration (EB_ET) models are extensively used to estimate different components of the hydrological cycle. Surface and subsurface hydrological processes are modeled in SWAT but limited to the extent of shallow aquif...

  1. Multi-Objective Calibrationo of Hydrologic Model Using Satellite Data

    Science.gov (United States)

    Hydrologic modeling often involves a large number of parameters, some of which cannot be measured directly and may vary with land cover, soil or even seasons. Therefore parameter estimation is a critical step in applying a hydrologic model to any study area. Parameter estimation is typically done by...

  2. Hydrological Modelling of Small Catchments Using Swat

    Science.gov (United States)

    Kannan, N.; White, S. M.; Worrall, F.; Groves, S.

    The data from a 142ha catchment in Eastern England(Colworth, Bedfordshire)are be- ing used to investigate the performance of the USDA SWAT software for modelling hydrology of small catchments. Stream flow at the catchment outlet has been mon- itored since October 1999. About 50% of the total catchment is directly controlled within one farm and a rotation of wheat, oil seed rape, grass, linseed, beans and peas is grown. Three years of stream flow and climate data are available. Calibration and validation of stream flow was carried out with both runoff modelling options in the SWAT model (USDA curve number method and the Green and Ampt method). The Nash and Sutcliffe efficiencies for the calibration period were 66% and 63% respec- tively. The performance of SWAT was better in the validation period as a whole, with regard to timing of peaks, baseflow values and Nash and Sutcliffe efficiency. An ef- ficiency of 70% was obtained using the curve number method, which is comparable with the efficiencies obtainable with more complex models. Despite this performance, SWAT is under predicting stream flow peaks. A detailed investigation of important model components, has allowed us to identify some of the reasons for under predic- tion of stream flow peaks.

  3. An Educational Model for Hands-On Hydrology Education

    Science.gov (United States)

    AghaKouchak, A.; Nakhjiri, N.; Habib, E. H.

    2014-12-01

    This presentation provides an overview of a hands-on modeling tool developed for students in civil engineering and earth science disciplines to help them learn the fundamentals of hydrologic processes, model calibration, sensitivity analysis, uncertainty assessment, and practice conceptual thinking in solving engineering problems. The toolbox includes two simplified hydrologic models, namely HBV-EDU and HBV-Ensemble, designed as a complement to theoretical hydrology lectures. The models provide an interdisciplinary application-oriented learning environment that introduces the hydrologic phenomena through the use of a simplified conceptual hydrologic model. The toolbox can be used for in-class lab practices and homework assignments, and assessment of students' understanding of hydrological processes. Using this modeling toolbox, students can gain more insights into how hydrological processes (e.g., precipitation, snowmelt and snow accumulation, soil moisture, evapotranspiration and runoff generation) are interconnected. The educational toolbox includes a MATLAB Graphical User Interface (GUI) and an ensemble simulation scheme that can be used for teaching more advanced topics including uncertainty analysis, and ensemble simulation. Both models have been administered in a class for both in-class instruction and a final project, and students submitted their feedback about the toolbox. The results indicate that this educational software had a positive impact on students understanding and knowledge of hydrology.

  4. Potential for Remotely Sensed Soil Moisture Data in Hydrologic Modeling

    Science.gov (United States)

    Engman, Edwin T.

    1997-01-01

    Many hydrologic processes display a unique signature that is detectable with microwave remote sensing. These signatures are in the form of the spatial and temporal distributions of surface soil moisture and portray the spatial heterogeneity of hydrologic processes and properties that one encounters in drainage basins. The hydrologic processes that may be detected include ground water recharge and discharge zones, storm runoff contributing areas, regions of potential and less than potential ET, and information about the hydrologic properties of soils and heterogeneity of hydrologic parameters. Microwave remote sensing has the potential to detect these signatures within a basin in the form of volumetric soil moisture measurements in the top few cm. These signatures should provide information on how and where to apply soil physical parameters in distributed and lumped parameter models and how to subdivide drainage basins into hydrologically similar sub-basins.

  5. Macro-Scale Correction of Precipitation Undercatch in the Midwest/Great Lakes Region

    Science.gov (United States)

    Chiu, C. M.; Hamlet, A. F.

    2015-12-01

    Precipitation gauge undercatch is a serious problem in the context of using observed meteorological data sets for hydrologic modeling studies in regions with cold winters, such as the Midwest. Attention to this matter is urgently needed to support hydroclimatological research efforts in the region. To support hydrologic modeling studies, a new hybrid gridded meteorological dataset at 1/16 degree resolution based on data from CO-OP station records, the U. S. Historical Climatology Network, the Historical Canadian Climate Database, and Precipitation Regression on Independent Slopes Method has been assembled over the Great Lakes and Midwest regions from 1915-2013 at daily time step. Preliminary hydrologic simulations results using the Variable Infiltration Capacity hydrology model with this hybrid gridded meteorological dataset showed that precipitation gauge undercatch was a very significant issue throughout the region, especially for winter snowfall and simulated streamflow, which were both grossly underpredicted. Correction of primary CO-OP station data is generally infeasible due to missing station meta data and lack of local-scale wind speed measurements. Instead, macro-scale post processing techniques were developed to adjust the regridded precipitation product from CO-OP station records from 1950-2013 forwards, accounting for undercatch as a function of regridded wind speed simulations obtained from NCAR Reanalysis. Comparisons of simulated and observed streamflow over seven river basins in the Midwest were used to evaluate the datasets constructed using different combinations of meteorological station inputs, with and without undercatch corrections. The comparisons show promise in producing corrected precipitation data sets from 1950-2013 for hydrologic modeling studies, with substantial improvements in streamflow simulation from the uncalibrated VIC model when gauge undercatch corrections are included.

  6. Improvement of Continuous Hydrologic Models and HMS SMA Parameters Reduction

    Science.gov (United States)

    Rezaeian Zadeh, Mehdi; Zia Hosseinipour, E.; Abghari, Hirad; Nikian, Ashkan; Shaeri Karimi, Sara; Moradzadeh Azar, Foad

    2010-05-01

    Hydrological models can help us to predict stream flows and associated runoff volumes of rainfall events within a watershed. There are many different reasons why we need to model the rainfall-runoff processes of for a watershed. However, the main reason is the limitation of hydrological measurement techniques and the costs of data collection at a fine scale. Generally, we are not able to measure all that we would like to know about a given hydrological systems. This is very particularly the case for ungauged catchments. Since the ultimate aim of prediction using models is to improve decision-making about a hydrological problem, therefore, having a robust and efficient modeling tool becomes an important factor. Among several hydrologic modeling approaches, continuous simulation has the best predictions because it can model dry and wet conditions during a long-term period. Continuous hydrologic models, unlike event based models, account for a watershed's soil moisture balance over a long-term period and are suitable for simulating daily, monthly, and seasonal streamflows. In this paper, we describe a soil moisture accounting (SMA) algorithm added to the hydrologic modeling system (HEC-HMS) computer program. As is well known in the hydrologic modeling community one of the ways for improving a model utility is the reduction of input parameters. The enhanced model developed in this study is applied to Khosrow Shirin Watershed, located in the north-west part of Fars Province in Iran, a data limited watershed. The HMS SMA algorithm divides the potential path of rainfall onto a watershed into five zones. The results showed that the output of HMS SMA is insensitive with the variation of many parameters such as soil storage and soil percolation rate. The study's objective is to remove insensitive parameters from the model input using Multi-objective sensitivity analysis. Keywords: Continuous Hydrologic Modeling, HMS SMA, Multi-objective sensitivity analysis, SMA Parameters

  7. Hydrology

    Science.gov (United States)

    Brutsaert, Wilfried

    2005-08-01

    Water in its different forms has always been a source of wonder, curiosity and practical concern for humans everywhere. Hydrology - An Introduction presents a coherent introduction to the fundamental principles of hydrology, based on the course that Wilfried Brutsaert has taught at Cornell University for the last thirty years. Hydrologic phenomena are dealt with at spatial and temporal scales at which they occur in nature. The physics and mathematics necessary to describe these phenomena are introduced and developed, and readers will require a working knowledge of calculus and basic fluid mechanics. The book will be invaluable as a textbook for entry-level courses in hydrology directed at advanced seniors and graduate students in physical science and engineering. In addition, the book will be more broadly of interest to professional scientists and engineers in hydrology, environmental science, meteorology, agronomy, geology, climatology, oceanology, glaciology and other earth sciences. Emphasis on fundamentals Clarification of the underlying physical processes Applications of fluid mechanics in the natural environment

  8. A comparison of hydrological deformation using GPS and global hydrological model for the Eurasian plate

    Science.gov (United States)

    Li, Zhen; Yue, Jianping; Li, Wang; Lu, Dekai; Li, Xiaogen

    2017-08-01

    The 0.5° × 0.5° gridded hydrological loading from Global Land Surface Discharge Model (LSDM) mass distributions is adopted for 32 GPS sites on the Eurasian plate from January 2010 to January 2014. When the heights of these sites that have been corrected for the effects of non-tidal atmospheric and ocean loading are adjusted by the hydrological loading deformation, more than one third of the root-mean-square (RMS) values of the GPS height variability become larger. After analyzing the results by continuous wavelet transform (CWT) and wavelet transform coherence (WTC), we confirm that hydrological loading primarily contributes to the annual variations in GPS heights. Further, the cross wavelet transform (XWT) is used to investigate the relative phase between the time series of GPS heights and hydrological deformation, and it is indicated that the annual oscillations in the two time series are physically related for some sites; other geophysical effect, GPS systematic errors and hydrological modeling errors could result in the phase asynchrony between GPS and hydrological loading signals for the other sites. Consequently, the phase asynchrony confirms that the annual fluctuations in GPS observations result from a combination of geophysical signals and systematic errors.

  9. Hydrology

    Science.gov (United States)

    Eisenbies, Mark H.; Hughes, W. Brian

    2000-01-01

    Hydrologic process are the main determinants of the type of wetland located on a site. Precipitation, groundwater, or flooding interact with soil properties and geomorphic setting to yield a complex matrix of conditions that control groundwater flux, water storage and discharge, water chemistry, biotic productivity, biodiversity, and biogeochemical cycling. Hydroperiod affects many abiotic factors that in turn determine plant and animal species composition, biodiversity, primary and secondary productivity, accumulation, of organic matter, and nutrient cycling. Because the hydrologic regime has a major influence on wetland functioning, understanding how hydrologic changes influence ecosystem processes is essential, especially in light of the pressures placed on remaining wetlands by society's demands for water resources and by potential global changes in climate.

  10. An approach to measure parameter sensitivity in watershed hydrological modelling

    Science.gov (United States)

    Hydrologic responses vary spatially and temporally according to watershed characteristics. In this study, the hydrologic models that we developed earlier for the Little Miami River (LMR) and Las Vegas Wash (LVW) watersheds were used for detail sensitivity analyses. To compare the...

  11. Improved parameter estimation for hydrological models using weighted object functions

    NARCIS (Netherlands)

    Stein, A.; Zaadnoordijk, W.J.

    1999-01-01

    This paper discusses the sensitivity of calibration of hydrological model parameters to different objective functions. Several functions are defined with weights depending upon the hydrological background. These are compared with an objective function based upon kriging. Calibration is applied to pi

  12. Radar hydrology principles, models, and applications

    CERN Document Server

    Hong, Yang

    2014-01-01

    ""This is the first book on radar hydrology written by hydrologists. Whereas the excellent knowledge of radar technology by the authors permits an adequate coverage of the principles of rainfall rate estimation by radar, their hydrological background allows them to provide a unique message on the benefits (and on the remaining challenges) in exploiting radar techniques in hydrology. … In a clear and concise manner, the book combines topics from different scientific disciplines into a unified approach aiming to guide the reader through the requirements, strengths, and pitfalls of the applica

  13. Hydrological modelling of the west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Suprit, K.

    A hydrological modelling framework was assembled for simulating discharges of the west-coast rivers of India. The framework is applied to the Mandovi river, Goa, a typical west-coast river. The modelling framework consisted of a digital elevation...

  14. ZONE package of the Central Valley Hydrologic Model

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset defines the model grid, active cells in model layers 2 and 3, and geologic province arrays of the ZONE package used in the transient hydrologic...

  15. Retrospective Analysis of Recent Flood Events With Persistent High Surface Runoff From Hydrological Modelling

    Science.gov (United States)

    Joshi, S.; Hakeem, K. Abdul; Raju, P. V.; Rao, V. V.; Yadav, A.; Diwakar, P. G.; Dadhwal, V. K.

    2014-11-01

    Floods are one of the most common and widespread disasters in India, with an estimated 40Mha of land prone to this natural disaster (National Flood Commission, India). Significant loss of property, infrastructure, livestock, public utilities resulting in large economic losses due to floods are recurrent every year in many parts of India. Flood forecasting and early warning is widely recognized and adopted as non-structural measure to lower the damages caused by the flood events. Estimating the rainfall excess that results into excessive river flow is preliminary effort in riverine flood estimation. Flood forecasting models are in general, are event based and do not fully account for successive and persistent excessive surface runoff conditions. Successive high rainfall events result in saturated soil moisture conditions, favourable for high surface runoff conditions. The present study is to explore the usefulness of hydrological model derived surface runoff, running on continuous times-step, to relate to the occurrence of flood inundation due to persistent and successive high surface runoff conditions. Variable Infiltration Capacity (VIC), a macro-scale hydrological model, was used to simulate daily runoff at systematic grid level incorporating daily meteorological data and land cover data. VIC is a physically based, semi-distributed macroscale hydrological model that represents surface and subsurface hydrologic process on spatially distributed grid cell. It explicitly represents sub-grid heterogeneity in land cover classes, taking their phenological changes into account. In this study, the model was setup for entire India using geo-spatial data available from multiple sources (NRSC, NBSS&LUP, NOAA, and IMD) and was calibrated with river discharge data from CWC at selected river basins. Using the grid-wise surface runoff estimates from the model, an algorithm was developed through a set of thresholds of successive high runoff values in order to identify grids

  16. Vermont "Hydrologically Corrected" Digital Elevation Model (VTHYDRODEM)

    Data.gov (United States)

    Vermont Center for Geographic Information — VTHYDRODEM was created to produce a "hydrologically correct" DEM, compliant with the Vermont Hydrography Dataset (VHD) in support of the "flow regime" project whose...

  17. Hydrologi

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    Hydro1ogi er den videnskab, der omhand1er jordens vand, dets forekomst, cirku1ation og forde1ing, dets kemiske og fysiske egenskaber samt indvirkning på omgivelserne, herunder dets relation ti1 alt liv på jorden. Således lyder en b1andt mange definitioner på begrebet hydrologi, og som man kan se...

  18. Hydrologi

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    Hydro1ogi er den videnskab, der omhand1er jordens vand, dets forekomst, cirku1ation og forde1ing, dets kemiske og fysiske egenskaber samt indvirkning på omgivelserne, herunder dets relation ti1 alt liv på jorden. Således lyder en b1andt mange definitioner på begrebet hydrologi, og som man kan se...

  19. Comparing Sediment Yield Predictions from Different Hydrologic Modeling Schemes

    Science.gov (United States)

    Dahl, T. A.; Kendall, A. D.; Hyndman, D. W.

    2015-12-01

    Sediment yield, or the delivery of sediment from the landscape to a river, is a difficult process to accurately model. It is primarily a function of hydrology and climate, but influenced by landcover and the underlying soils. These additional factors make it much more difficult to accurately model than water flow alone. It is not intuitive what impact different hydrologic modeling schemes may have on the prediction of sediment yield. Here, two implementations of the Modified Universal Soil Loss Equation (MUSLE) are compared to examine the effects of hydrologic model choice. Both the Soil and Water Assessment Tool (SWAT) and the Landscape Hydrology Model (LHM) utilize the MUSLE for calculating sediment yield. SWAT is a lumped parameter hydrologic model developed by the USDA, which is commonly used for predicting sediment yield. LHM is a fully distributed hydrologic model developed primarily for integrated surface and groundwater studies at the watershed to regional scale. SWAT and LHM models were developed and tested for two large, adjacent watersheds in the Great Lakes region; the Maumee River and the St. Joseph River. The models were run using a variety of single model and ensemble downscaled climate change scenarios from the Coupled Model Intercomparison Project 5 (CMIP5). The initial results of this comparison are discussed here.

  20. Inter-comparison of experimental catchment data and hydrological modelling

    Science.gov (United States)

    Singh, Shailesh Kumar; Ibbitt, Richard; Srinivasan, M. S.; Shankar, Ude

    2017-07-01

    Hydrological models account for the storage, flow of water and water balance in a catchment, including exchanges of water and energy with the ground, atmosphere and oceans. Because of the need to simplify hydrological models, parameters are often included to help with modelling hydrological processes. Generally the parameters of lumped, semi or distributed hydrological models depend on the values estimated at a gauged location, generally at outlet of the catchment (mostly using discharge). In this approach it is hard to judge how well a model represents internal catchment processes of the hydrological cycle as well as also ignoring the spatial heterogeneity of the catchment. The purpose of the paper is to assess, and potentially improve, the ability of a physically-based semi-distributed hydrological model, TopNet, using a spatially and temporally detailed set of field measurements of catchment responses to diverse weather conditions. The TopNet rainfall-runoff model was applied to the Waipara catchment located in the South Island of New Zealand. Observations from field experiments were compared with the simulation results of uncalibrated TopNet model. The total amount of simulated runoff showed reasonable agreement with observations. However, the model overestimated baseflow and underestimated surface flow. The results show that soil moisture variation within the catchment is well represented by the model. However, comparison of the observed water balance with model results show that there is a deficiency in the calculation of evapotranspiration.

  1. Revisiting an interdisciplinary hydrological modelling project. A socio-hydrology (?) example from the early 2000s

    Science.gov (United States)

    Seidl, Roman; Barthel, Roland

    2016-04-01

    Interdisciplinary scientific and societal knowledge plays an increasingly important role in global change research. Also, in the field of water resources interdisciplinarity as well as cooperation with stakeholders from outside academia have been recognized as important. In this contribution, we revisit an integrated regional modelling system (DANUBIA), which was developed by an interdisciplinary team of researchers and relied on stakeholder participation in the framework of the GLOWA-Danube project from 2001 to 2011 (Mauser and Prasch 2016). As the model was developed before the current increase in literature on participatory modelling and interdisciplinarity, we ask how a socio-hydrology approach would have helped and in what way it would have made the work different. The present contribution firstly presents the interdisciplinary concept of DANUBIA, mainly with focus on the integration of human behaviour in a spatially explicit, process-based numerical modelling system (Roland Barthel, Janisch, Schwarz, Trifkovic, Nickel, Schulz, and Mauser 2008; R. Barthel, Nickel, Meleg, Trifkovic, and Braun 2005). Secondly, we compare the approaches to interdisciplinarity in GLOWA-Danube with concepts and ideas presented by socio-hydrology. Thirdly, we frame DANUBIA and a review of key literature on socio-hydrology in the context of a survey among hydrologists (N = 184). This discussion is used to highlight gaps and opportunities of the socio-hydrology approach. We show that the interdisciplinary aspect of the project and the participatory process of stakeholder integration in DANUBIA were not entirely successful. However, important insights were gained and important lessons were learnt. Against the background of these experiences we feel that in its current state, socio-hydrology is still lacking a plan for knowledge integration. Moreover, we consider necessary that socio-hydrology takes into account the lessons learnt from these earlier examples of knowledge integration

  2. A double continuum hydrological model for glacier applications

    Science.gov (United States)

    de Fleurian, B.; Gagliardini, O.; Zwinger, T.; Durand, G.; Le Meur, E.; Mair, D.; Råback, P.

    2014-01-01

    The flow of glaciers and ice streams is strongly influenced by the presence of water at the interface between ice and bed. In this paper, a hydrological model evaluating the subglacial water pressure is developed with the final aim of estimating the sliding velocities of glaciers. The global model fully couples the subglacial hydrology and the ice dynamics through a water-dependent friction law. The hydrological part of the model follows a double continuum approach which relies on the use of porous layers to compute water heads in inefficient and efficient drainage systems. This method has the advantage of a relatively low computational cost that would allow its application to large ice bodies such as Greenland or Antarctica ice streams. The hydrological model has been implemented in the finite element code Elmer/Ice, which simultaneously computes the ice flow. Herein, we present an application to the Haut Glacier d'Arolla for which we have a large number of observations, making it well suited to the purpose of validating both the hydrology and ice flow model components. The selection of hydrological, under-determined parameters from a wide range of values is guided by comparison of the model results with available glacier observations. Once this selection has been performed, the coupling between subglacial hydrology and ice dynamics is undertaken throughout a melt season. Results indicate that this new modelling approach for subglacial hydrology is able to reproduce the broad temporal and spatial patterns of the observed subglacial hydrological system. Furthermore, the coupling with the ice dynamics shows good agreement with the observed spring speed-up.

  3. A subglacial hydrological model dedicated to glacier sliding

    Directory of Open Access Journals (Sweden)

    B. de Fleurian

    2013-07-01

    Full Text Available The flow of glaciers and ice-streams is strongly influenced by the presence of water at the interface between ice and bedrock. In this paper, a hydrological model evaluating the subglacial water pressure is developed with the final aim of estimating the sliding velocities of glaciers. The global model fully couples the subglacial hydrology and the ice dynamics through a water-dependent friction law. The hydrological part of the model follows a double continuum approach which relies on the use of porous layers to compute water heads in inefficient and efficient drainage systems. This method has the advantage of a relatively low computational cost that would allow its application to large ice bodies such as Greenland or Antarctica ice-streams. The hydrological model has been implemented in the finite element code Elmer/Ice, which simultaneously computes the ice flow. Herein, we present an application to the Haut Glacier d'Arolla for which we have a large number of observations, making it well suited to the purpose of validating both the hydrology and ice flow model components. The selection of hydrological, under-determined parameters from a wide range of values is guided by comparison of the model results with available glacier observations. Once this selection has been performed, the coupling between subglacial hydrology and ice dynamics is undertaken throughout a melt season. Results indicate that this new modelling approach for subglacial hydrology is able to reproduce the broad temporal and spatial patterns of the observed subglacial hydrological system. Furthermore, the coupling with the ice dynamics shows good agreement with the observed spring speed-up.

  4. Hydrological modeling of the Jiaoyi watershed (China) using HSPF model.

    Science.gov (United States)

    Yan, Chang-An; Zhang, Wanchang; Zhang, Zhijie

    2014-01-01

    A watershed hydrological model, hydrological simulation program-Fortran (HSPF), was applied to simulate the spatial and temporal variation of hydrological processes in the Jiaoyi watershed of Huaihe River Basin, the heaviest shortage of water resources and polluted area in China. The model was calibrated using the years 2001-2004 and validated with data from 2005 to 2006. Calibration and validation results showed that the model generally simulated mean monthly and daily runoff precisely due to the close matching hydrographs between simulated and observed runoff, as well as the excellent evaluation indicators such as Nash-Sutcliffe efficiency (NSE), coefficient of correlation (R (2)), and the relative error (RE). The similar simulation results between calibration and validation period showed that all the calibrated parameters had a certain representation in Jiaoyi watershed. Additionally, the simulation in rainy months was more accurate than the drought months. Another result in this paper was that HSPF was also capable of estimating the water balance components reasonably and realistically in space through the whole watershed. The calibrated model can be used to explore the effects of climate change scenarios and various watershed management practices on the water resources and water environment in the basin.

  5. Hydrological Modeling of the Jiaoyi Watershed (China Using HSPF Model

    Directory of Open Access Journals (Sweden)

    Chang-An Yan

    2014-01-01

    Full Text Available A watershed hydrological model, hydrological simulation program-Fortran (HSPF, was applied to simulate the spatial and temporal variation of hydrological processes in the Jiaoyi watershed of Huaihe River Basin, the heaviest shortage of water resources and polluted area in China. The model was calibrated using the years 2001–2004 and validated with data from 2005 to 2006. Calibration and validation results showed that the model generally simulated mean monthly and daily runoff precisely due to the close matching hydrographs between simulated and observed runoff, as well as the excellent evaluation indicators such as Nash-Sutcliffe efficiency (NSE, coefficient of correlation (R2, and the relative error (RE. The similar simulation results between calibration and validation period showed that all the calibrated parameters had a certain representation in Jiaoyi watershed. Additionally, the simulation in rainy months was more accurate than the drought months. Another result in this paper was that HSPF was also capable of estimating the water balance components reasonably and realistically in space through the whole watershed. The calibrated model can be used to explore the effects of climate change scenarios and various watershed management practices on the water resources and water environment in the basin.

  6. Seasonal Gravity Field Variations from GRACE and Hydrological Models

    DEFF Research Database (Denmark)

    Andersen, Ole Baltazar; Hinderer, Jacques; Lemoine, Frank G.

    2004-01-01

    This study present an investigation of the newly released 18 monthly gravity field solutions from the GRACE twin space-crafts with emphasis on the global scale annual gravity field variations observed from GRACE and modeled from hydrological models as annual changes in terrestrial water storage....... Four global hydrological models covering the same period in 2002–2003 as the GRACE observations were investigated to for their mutual consistency in estimates of annual variation in terrestrial water storage and related temporal changes in gravity field. The hydrological models differ by a maximum of 2...... µGal or nearly 5 cm equivalent water storage in selected regions. Integrated over all land masses the standard deviation among the annual signal from the four hydrological models are 0.6 µGal equivalent to around 1.4 cm in equivalent water layer thickness. The estimated accuracy of the annual...

  7. Seasonal Gravity Field Variations from GRACE and Hydrological Models

    DEFF Research Database (Denmark)

    Andersen, Ole Baltazar; Hinderer, Jacques; Lemoine, Frank G.

    2004-01-01

    This study present an investigation of the newly released 18 monthly gravity field solutions from the GRACE twin space-crafts with emphasis on the global scale annual gravity field variations observed from GRACE and modeled from hydrological models as annual changes in terrestrial water storage....... Four global hydrological models covering the same period in 2002–2003 as the GRACE observations were investigated to for their mutual consistency in estimates of annual variation in terrestrial water storage and related temporal changes in gravity field. The hydrological models differ by a maximum of 2...... variation in gravity from GRACE is around 0.4 µGal (0.9 cm water layer thickness) on 2000 km length scales. This makes the GRACE observations of terrestrial water storage on global annual scales more accurate than present-day hydrological models....

  8. Climate model uncertainty vs. conceptual geological uncertainty in hydrological modeling

    Directory of Open Access Journals (Sweden)

    T. O. Sonnenborg

    2015-04-01

    Full Text Available Projections of climate change impact are associated with a cascade of uncertainties including CO2 emission scenario, climate model, downscaling and impact model. The relative importance of the individual uncertainty sources is expected to depend on several factors including the quantity that is projected. In the present study the impacts of climate model uncertainty and geological model uncertainty on hydraulic head, stream flow, travel time and capture zones are evaluated. Six versions of a physically based and distributed hydrological model, each containing a unique interpretation of the geological structure of the model area, are forced by 11 climate model projections. Each projection of future climate is a result of a GCM-RCM model combination (from the ENSEMBLES project forced by the same CO2 scenario (A1B. The changes from the reference period (1991–2010 to the future period (2081–2100 in projected hydrological variables are evaluated and the effects of geological model and climate model uncertainties are quantified. The results show that uncertainty propagation is context dependent. While the geological conceptualization is the dominating uncertainty source for projection of travel time and capture zones, the uncertainty on the climate models is more important for groundwater hydraulic heads and stream flow.

  9. Modeling the hydrological patterns on Pantanal wetlands, Brazil

    Science.gov (United States)

    Castro, A. A.; Cuartas, A.; Coe, M. T.; Koumrouyan, A.; Panday, P. K.; Lefebvre, P.; Padovani, C.; Costa, M. H.; de Oliveira, G. S.

    2014-12-01

    The Pantanal of Brazil is one of the world's largest wetland regions. It is located within the 370,000 km2 Alto Paraguai Basin (BAP). In wet years almost 15% of the total area of the basin can be flooded (approximately 53,000 km2). The hydrological cycle is particularly important in the Pantanal in the transport of materials, and the transfer of energy between atmospheric, aquatic, and terrestrial systems. The INLAND (Integrated Land Surface Model) terrestrial ecosystem model is coupled with the THMB hydrological model to examine the hydrological balance and water dynamics for this region. The INLAND model is based on the IBIS dynamic vegetation model, while THMB represents the river, wetland and lake dynamics of the land surface. The modeled hydrological components are validated with surface and satellite-based estimates of precipitation (gridded observations from CRU v. 3.21, reanalysis data from ERA-interim, and TRMM estimates), evapotranspiration (MODIS and Land Flux-Eval dataset), total runoff (discharge data from ANA-Agência Nacional das Águas - Brazil), and terrestrial water storage (GRACE). Results show that the coupled hydrological model adequately represents the water cycle components, the river discharge and flooded areas. Model simulations are further used to study the influences of climatic variations on the hydrological components, river network, and the inundated areas in the Pantanal.

  10. Improving the representation of hydrologic processes in Earth System Models

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Martyn P. [National Center for Atmospheric Research, Boulder Colorado USA; Fan, Ying [Department of Earth and Planetary Sciences, Rutgers University, New Brunswick New Jersey USA; Lawrence, David M. [National Center for Atmospheric Research, Boulder Colorado USA; Adam, Jennifer C. [Department of Civil and Environmental Engineering, Washington State University, Pullman Washington USA; Bolster, Diogo [Department of Civil & Environmental Engineering and Earth Sciences, University of Notre Dame, South Bend Indiana USA; Gochis, David J. [National Center for Atmospheric Research, Boulder Colorado USA; Hooper, Richard P. [The Consortium of Universities for the Advancement of Hydrologic Science, Inc.; Kumar, Mukesh [Nichols Schools of Environment, Duke University, Durham North Carolina USA; Leung, L. Ruby [Pacific Northwest National Laboratory, Richland Washington USA; Mackay, D. Scott [Department of Geography, University at Buffalo, State University of New York, Buffalo New York USA; Maxwell, Reed M. [Department of Geology and Geological Engineering, Colorado School of Mines, Golden Colorado USA; Shen, Chaopeng [Department of Civil and Environmental Engineering, Pennsylvania State University, State College Pennsylvania USA; Swenson, Sean C. [National Center for Atmospheric Research, Boulder Colorado USA; Zeng, Xubin [Department of Atmospheric Sciences, University of Arizona, Tucson Arizona USA

    2015-08-21

    Many of the scientific and societal challenges in understanding and preparing for global environmental change rest upon our ability to understand and predict the water cycle change at large river basin, continent, and global scales. However, current large-scale models, such as the land components of Earth System Models (ESMs), do not yet represent the terrestrial water cycle in a fully integrated manner or resolve the finer-scale processes that can dominate large-scale water budgets. This paper reviews the current representation of hydrologic processes in ESMs and identifies the key opportunities for improvement. This review suggests that (1) the development of ESMs has not kept pace with modeling advances in hydrology, both through neglecting key processes (e.g., groundwater) and neglecting key aspects of spatial variability and hydrologic connectivity; and (2) many modeling advances in hydrology can readily be incorporated into ESMs and substantially improve predictions of the water cycle. Accelerating modeling advances in ESMs requires comprehensive hydrologic benchmarking activities, in order to systematically evaluate competing modeling alternatives, understand model weaknesses, and prioritize model development needs. This demands stronger collaboration, both through greater engagement of hydrologists in ESM development and through more detailed evaluation of ESM processes in research watersheds. Advances in the representation of hydrologic process in ESMs can substantially improve energy, carbon and nutrient cycle prediction capabilities through the fundamental role the water cycle plays in regulating these cycles.

  11. Evapotranspiration Input Data for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains monthly reference evapotranspiration (ETo) data for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an...

  12. California Basin Characterization Model Downscaled Climate and Hydrology

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The California Basin Characterization Model (CA-BCM 2014) dataset provides historical and projected climate and hydrologic surfaces for the region that encompasses...

  13. On hydrological model complexity, its geometrical interpretations and prediction uncertainty

    NARCIS (Netherlands)

    Arkesteijn, E.C.M.M.; Pande, S.

    2013-01-01

    Knowledge of hydrological model complexity can aid selection of an optimal prediction model out of a set of available models. Optimal model selection is formalized as selection of the least complex model out of a subset of models that have lower empirical risk. This may be considered equivalent to

  14. Assessing Hydrological Extreme Events with Geospatial Data and Models

    Science.gov (United States)

    Vivoni, Enrique R.; Grimaldi, Salvatore; Nardi, Fernando; Ivanov, Valeriy Y.; Castelli, Fabio; Bras, Rafael L.; Ubertini, Lucio

    2004-09-01

    Prediction of river basin hydrological response to extreme meteorological events is a primary concern in areas with frequent flooding, landslides, and debris flows. Natural hydrogeological disasters in many regions lead to extensive property damage, impact on societal activities, and loss of life. Hydrologists have a long history of assessing and predicting hydrologic hazards through the combined use of field observations, monitoring networks, remote sensing, and numerical modeling. Nevertheless, the integration of field data and computer models has yet to result in prediction systems that capture space-time interactions between meteorological forcing, land surface characteristics, and the internal hydrological response in river basins. Capabilities for assessing hydrologic extreme events are greatly enhanced via the use of geospatial data sets describing watershed properties such as topography, channel structure, soils, vegetation, and geological features. Recent advances in managing, processing, and visualizing cartographic data with geographic information systems (GIS) have enabled their direct use in spatially distributed hydrological models. In a distributed model application, geospatial data sets can be used to establish the model domain, specify boundary and initial conditions, determine the spatial variation of parameter values, and provide the spatial model forcing. By representing a watershed through a set of discrete elements, distributed models simulate water, energy, and mass transport in a landscape and provide estimates of the spatial pattern of hydrologic states, fluxes, and pathways.

  15. Hydrological Modelling of Mountainous and Glacierised regions under Changing Climate

    OpenAIRE

    Li, Hong

    2015-01-01

    Climate change is one of the most serious environmental threats that humanity has ever been confronted to. Hydrological models are vital tools to asses its impacts on the water cycle and water resources. The goal of this project is to evaluate and improve the capacity of the HBV model (Hydrologiska Byr°ans Vattenbalansavdelning) in simulating hydrological processes in mountainous and glacierised regions under both the present and future climate. This goal is achieved in two steps: (1) impleme...

  16. Global-scale regionalization of hydrologic model parameters

    Science.gov (United States)

    Beck, Hylke E.; van Dijk, Albert I. J. M.; de Roo, Ad; Miralles, Diego G.; McVicar, Tim R.; Schellekens, Jaap; Bruijnzeel, L. Adrian

    2016-05-01

    Current state-of-the-art models typically applied at continental to global scales (hereafter called macroscale) tend to use a priori parameters, resulting in suboptimal streamflow (Q) simulation. For the first time, a scheme for regionalization of model parameters at the global scale was developed. We used data from a diverse set of 1787 small-to-medium sized catchments (10-10,000 km2) and the simple conceptual HBV model to set up and test the scheme. Each catchment was calibrated against observed daily Q, after which 674 catchments with high calibration and validation scores, and thus presumably good-quality observed Q and forcing data, were selected to serve as donor catchments. The calibrated parameter sets for the donors were subsequently transferred to 0.5° grid cells with similar climatic and physiographic characteristics, resulting in parameter maps for HBV with global coverage. For each grid cell, we used the 10 most similar donor catchments, rather than the single most similar donor, and averaged the resulting simulated Q, which enhanced model performance. The 1113 catchments not used as donors were used to independently evaluate the scheme. The regionalized parameters outperformed spatially uniform (i.e., averaged calibrated) parameters for 79% of the evaluation catchments. Substantial improvements were evident for all major Köppen-Geiger climate types and even for evaluation catchments > 5000 km distant from the donors. The median improvement was about half of the performance increase achieved through calibration. HBV with regionalized parameters outperformed nine state-of-the-art macroscale models, suggesting these might also benefit from the new regionalization scheme. The produced HBV parameter maps including ancillary data are available via www.gloh2o.org.

  17. VIC–CropSyst-v2: A regional-scale modeling platform to simulate the nexus of climate, hydrology, cropping systems, and human decisions

    Directory of Open Access Journals (Sweden)

    K. Malek

    2017-08-01

    Full Text Available Food supply is affected by a complex nexus of land, atmosphere, and human processes, including short- and long-term stressors (e.g., drought and climate change, respectively. A simulation platform that captures these complex elements can be used to inform policy and best management practices to promote sustainable agriculture. We have developed a tightly coupled framework using the macroscale variable infiltration capacity (VIC hydrologic model and the CropSyst agricultural model. A mechanistic irrigation module was also developed for inclusion in this framework. Because VIC–CropSyst combines two widely used and mechanistic models (for crop phenology, growth, management, and macroscale hydrology, it can provide realistic and hydrologically consistent simulations of water availability, crop water requirements for irrigation, and agricultural productivity for both irrigated and dryland systems. This allows VIC–CropSyst to provide managers and decision makers with reliable information on regional water stresses and their impacts on food production. Additionally, VIC–CropSyst is being used in conjunction with socioeconomic models, river system models, and atmospheric models to simulate feedback processes between regional water availability, agricultural water management decisions, and land–atmosphere interactions. The performance of VIC–CropSyst was evaluated on both regional (over the US Pacific Northwest and point scales. Point-scale evaluation involved using two flux tower sites located in agricultural fields in the US (Nebraska and Illinois. The agreement between recorded and simulated evapotranspiration (ET, applied irrigation water, soil moisture, leaf area index (LAI, and yield indicated that, although the model is intended to work on regional scales, it also captures field-scale processes in agricultural areas.

  18. VIC-CropSyst-v2: A regional-scale modeling platform to simulate the nexus of climate, hydrology, cropping systems, and human decisions

    Science.gov (United States)

    Malek, Keyvan; Stöckle, Claudio; Chinnayakanahalli, Kiran; Nelson, Roger; Liu, Mingliang; Rajagopalan, Kirti; Barik, Muhammad; Adam, Jennifer C.

    2017-08-01

    Food supply is affected by a complex nexus of land, atmosphere, and human processes, including short- and long-term stressors (e.g., drought and climate change, respectively). A simulation platform that captures these complex elements can be used to inform policy and best management practices to promote sustainable agriculture. We have developed a tightly coupled framework using the macroscale variable infiltration capacity (VIC) hydrologic model and the CropSyst agricultural model. A mechanistic irrigation module was also developed for inclusion in this framework. Because VIC-CropSyst combines two widely used and mechanistic models (for crop phenology, growth, management, and macroscale hydrology), it can provide realistic and hydrologically consistent simulations of water availability, crop water requirements for irrigation, and agricultural productivity for both irrigated and dryland systems. This allows VIC-CropSyst to provide managers and decision makers with reliable information on regional water stresses and their impacts on food production. Additionally, VIC-CropSyst is being used in conjunction with socioeconomic models, river system models, and atmospheric models to simulate feedback processes between regional water availability, agricultural water management decisions, and land-atmosphere interactions. The performance of VIC-CropSyst was evaluated on both regional (over the US Pacific Northwest) and point scales. Point-scale evaluation involved using two flux tower sites located in agricultural fields in the US (Nebraska and Illinois). The agreement between recorded and simulated evapotranspiration (ET), applied irrigation water, soil moisture, leaf area index (LAI), and yield indicated that, although the model is intended to work on regional scales, it also captures field-scale processes in agricultural areas.

  19. Treatment of input uncertainty in hydrologic modeling: Doing hydrology backward with Markov chain Monte Carlo simulation

    NARCIS (Netherlands)

    Vrugt, J.A.; Braak, ter C.J.F.; Clark, M.P.; Hyman, J.M.; Robinson, B.A.

    2008-01-01

    There is increasing consensus in the hydrologic literature that an appropriate framework for streamflow forecasting and simulation should include explicit recognition of forcing and parameter and model structural error. This paper presents a novel Markov chain Monte Carlo (MCMC) sampler, entitled

  20. Landscape-based hydrological modelling: Understanding the influence of climate, topography, and vegetation on catchment hydrology

    NARCIS (Netherlands)

    Gao, H.

    2015-01-01

    In this thesis, a novel landscape-based hydrological model is presented that was developed and tested in numerous catchments around the world with various landscapes and climate conditions. A landscape is considered to consist of a topography and an ecosystem living on it. Firstly, the influence of

  1. On the spatio-temporal analysis of hydrological droughts from global hydrological models

    NARCIS (Netherlands)

    Corzo Perez, G.; Huijgevoort, van M.H.J.; Voss, F.; Lanen, van H.A.J.

    2011-01-01

    The recent concerns for world-wide extreme events related to climate change have motivated the development of large scale models that simulate the global water cycle. In this context, analysis of hydrological extremes is important and requires the adaptation of identification methods used for river

  2. Treatment of input uncertainty in hydrologic modeling: Doing hydrology backward with Markov chain Monte Carlo simulation

    NARCIS (Netherlands)

    Vrugt, J.A.; Braak, ter C.J.F.; Clark, M.P.; Hyman, J.M.; Robinson, B.A.

    2008-01-01

    There is increasing consensus in the hydrologic literature that an appropriate framework for streamflow forecasting and simulation should include explicit recognition of forcing and parameter and model structural error. This paper presents a novel Markov chain Monte Carlo (MCMC) sampler, entitled di

  3. Evaluation of satellite rainfall products through hydrologic simulation in a fully distributed hydrologic model

    Science.gov (United States)

    Bitew, Menberu M.; Gebremichael, Mekonnen

    2011-06-01

    The goal of this study is to evaluate the accuracy of four global high-resolution satellite rainfall products (CMORPH, TMPA 3B42RT, TMPA 3B42, and PERSIANN) through the hydrologic simulation of a 1656 km2 mountainous watershed in the fully distributed MIKE SHE hydrologic model. This study shows that there are significant biases in the satellite rainfall estimates and large variations in rainfall amounts, leading to large variations in hydrologic simulations. The rainfall algorithms that use primarily microwave data (CMORPH and TMPA 3B42RT) show consistent and better performance in streamflow simulation (bias in the order of -53% to -3%, Nash-Sutcliffe efficiency (NSE) from 0.34 to 0.65); the rainfall algorithm that uses primarily infrared data (PERSIANN) shows lower performance (bias from -82% to -3%, Nash-Sutcliffe efficiency from -0.39 to 0.43); and the rainfall algorithm that merges the satellite data with rain gage data (TMPA 3B42) shows inconsistencies and the lowest performance (bias from -86% to 0.43%, Nash-Sutcliffe efficiency from -0.50 to 0.27). A dilemma between calibrating the hydrologic model with rain gage data and calibrating it with the corresponding satellite rainfall data is presented. Calibrating the model with corresponding satellite rainfall data increases the performance of satellite streamflow simulation compared to the model calibrated with rain gage data, but decreases the performance of satellite evapotranspiration simulation.

  4. A question driven socio-hydrological modeling process

    Science.gov (United States)

    Garcia, M.; Portney, K.; Islam, S.

    2016-01-01

    Human and hydrological systems are coupled: human activity impacts the hydrological cycle and hydrological conditions can, but do not always, trigger changes in human systems. Traditional modeling approaches with no feedback between hydrological and human systems typically cannot offer insight into how different patterns of natural variability or human-induced changes may propagate through this coupled system. Modeling of coupled human-hydrological systems, also called socio-hydrological systems, recognizes the potential for humans to transform hydrological systems and for hydrological conditions to influence human behavior. However, this coupling introduces new challenges and existing literature does not offer clear guidance regarding model conceptualization. There are no universally accepted laws of human behavior as there are for the physical systems; furthermore, a shared understanding of important processes within the field is often used to develop hydrological models, but there is no such consensus on the relevant processes in socio-hydrological systems. Here we present a question driven process to address these challenges. Such an approach allows modeling structure, scope and detail to remain contingent on and adaptive to the question context. We demonstrate the utility of this process by revisiting a classic question in water resources engineering on reservoir operation rules: what is the impact of reservoir operation policy on the reliability of water supply for a growing city? Our example model couples hydrological and human systems by linking the rate of demand decreases to the past reliability to compare standard operating policy (SOP) with hedging policy (HP). The model shows that reservoir storage acts both as a buffer for variability and as a delay triggering oscillations around a sustainable level of demand. HP reduces the threshold for action thereby decreasing the delay and the oscillation effect. As a result, per capita demand decreases during

  5. Hillslope hydrological modeling : the role of bedrock geometry and hillslope-stream interaction

    NARCIS (Netherlands)

    Shahedi, K.

    2008-01-01

    Keywords: Hillslope hydrology, hydrological modeling, bedrock geometry, boundary condition, numerical solution. This thesis focuses on hillslope subsurface flow as a dominant control on the hydrological processes defining the catchment response to rainfall. Due to the difficulties associated with

  6. Hydrologic modeling strategy for the Islamic Republic of Mauritania, Africa

    Science.gov (United States)

    Friedel, Michael J.

    2008-01-01

    The government of Mauritania is interested in how to maintain hydrologic balance to ensure a long-term stable water supply for minerals-related, domestic, and other purposes. Because of the many complicating and competing natural and anthropogenic factors, hydrologists will perform quantitative analysis with specific objectives and relevant computer models in mind. Whereas various computer models are available for studying water-resource priorities, the success of these models to provide reliable predictions largely depends on adequacy of the model-calibration process. Predictive analysis helps us evaluate the accuracy and uncertainty associated with simulated dependent variables of our calibrated model. In this report, the hydrologic modeling process is reviewed and a strategy summarized for future Mauritanian hydrologic modeling studies.

  7. Embedding complex hydrology in the climate system - towards fully coupled climate-hydrology models

    DEFF Research Database (Denmark)

    Butts, M.; Rasmussen, S.H.; Ridler, M.

    2013-01-01

    model, HIRHAM. The physics of the coupling is formulated using an energy-based SVAT (land surface) model while the numerical coupling exploits the OpenMI modelling interface. First, some investigations of the applicability of the SVAT model are presented, including our ability to characterise...... distributed parameters using satellite remote sensing. Secondly, field data are used to investigate the effects of model resolution and parameter scales for use in a coupled model. Finally, the development of the fully coupled climate-hydrology model is described and some of the challenges associated...

  8. Coupling Hydrologic and Hydrodynamic Models to Estimate PMF

    Science.gov (United States)

    Felder, G.; Weingartner, R.

    2015-12-01

    Most sophisticated probable maximum flood (PMF) estimations derive the PMF from the probable maximum precipitation (PMP) by applying deterministic hydrologic models calibrated with observed data. This method is based on the assumption that the hydrological system is stationary, meaning that the system behaviour during the calibration period or the calibration event is presumed to be the same as it is during the PMF. However, as soon as a catchment-specific threshold is reached, the system is no longer stationary. At or beyond this threshold, retention areas, new flow paths, and changing runoff processes can strongly affect downstream peak discharge. These effects can be accounted for by coupling hydrologic and hydrodynamic models, a technique that is particularly promising when the expected peak discharge may considerably exceed the observed maximum discharge. In such cases, the coupling of hydrologic and hydraulic models has the potential to significantly increase the physical plausibility of PMF estimations. This procedure ensures both that the estimated extreme peak discharge does not exceed the physical limit based on riverbed capacity and that the dampening effect of inundation processes on peak discharge is considered. Our study discusses the prospect of considering retention effects on PMF estimations by coupling hydrologic and hydrodynamic models. This method is tested by forcing PREVAH, a semi-distributed deterministic hydrological model, with randomly generated, physically plausible extreme precipitation patterns. The resulting hydrographs are then used to externally force the hydraulic model BASEMENT-ETH (riverbed in 1D, potential inundation areas in 2D). Finally, the PMF estimation results obtained using the coupled modelling approach are compared to the results obtained using ordinary hydrologic modelling.

  9. On the importance of hysteresis in hydrological modeling

    Science.gov (United States)

    Gharari, S.; Razavi, S.

    2016-12-01

    Hysteresis is a widely observed phenomenon in hydrology and beyond at a range of spatio-temporal scales. Despite significant research efforts, hysteretic behaviors and their implications for hydrologic modelling and prediction have remained poorly defined and understood. The current state of the art is that almost all practical models in use do not include any hysteretic component or relationship that directly represents such behaviors. In this study, we review different types of hysteretic behaviors in hydrology and formulate a general definition for hysteresis that might be useful in the context of hydrological modeling. We show how hysteresis can be the result of missing (or ignoring) dimensions/physics that govern a real system. Further, using existing strategies for hysteresis modeling from other disciples, we evaluate to what extent the addition of hysteretic components to a hydrological model (such as soil moisture and soil suction head - soil hydraulic conductivity) change the model performance and associated uncertainties. Our analyses also show that properly designed model structures can largely compensate for the lack of hysteretic components in models and allow mimicking the observed hysteretic behaviors.

  10. airGRteaching: an R-package designed for teaching hydrology with lumped hydrological models

    Science.gov (United States)

    Thirel, Guillaume; Delaigue, Olivier; Coron, Laurent; Andréassian, Vazken; Brigode, Pierre

    2017-04-01

    Lumped hydrological models are useful and convenient tools for research, engineering and educational purposes. They propose catchment-scale representations of the precipitation-discharge relationship. Thanks to their limited data requirements, they can be easily implemented and run. With such models, it is possible to simulate a number of hydrological key processes over the catchment with limited structural and parametric complexity, typically evapotranspiration, runoff, underground losses, etc. The Hydrology Group at Irstea (Antony) has been developing a suite of rainfall-runoff models over the past 30 years. This resulted in a suite of models running at different time steps (from hourly to annual) applicable for various issues including water balance estimation, forecasting, simulation of impacts and scenario testing. Recently, Irstea has developed an easy-to-use R-package (R Core Team, 2016), called airGR (Coron et al., 2016, 2017), to make these models widely available. Although its initial target public was hydrological modellers, the package is already used for educational purposes. Indeed, simple models allow for rapidly visualising the effects of parameterizations and model components on flows hydrographs. In order to avoid the difficulties that students may have when manipulating R and datasets, we developed (Delaigue and Coron, 2016): - Three simplified functions to prepare data, calibrate a model and run a simulation - Simplified and dynamic plot functions - A shiny (Chang et al., 2016) interface that connects this R-package to a browser-based visualisation tool. On this interface, the students can use different hydrological models (including the possibility to use a snow-accounting model), manually modify their parameters and automatically calibrate their parameters with diverse objective functions. One of the visualisation tabs of the interface includes observed precipitation and temperature, simulated snowpack (if any), observed and simulated

  11. Strategies for using remotely sensed data in hydrologic models

    Science.gov (United States)

    Peck, E. L.; Keefer, T. N.; Johnson, E. R. (Principal Investigator)

    1981-01-01

    Present and planned remote sensing capabilities were evaluated. The usefulness of six remote sensing capabilities (soil moisture, land cover, impervious area, areal extent of snow cover, areal extent of frozen ground, and water equivalent of the snow cover) with seven hydrologic models (API, CREAMS, NWSRFS, STORM, STANFORD, SSARR, and NWSRFS Snowmelt) were reviewed. The results indicate remote sensing information has only limited value for use with the hydrologic models in their present form. With minor modifications to the models the usefulness would be enhanced. Specific recommendations are made for incorporating snow covered area measurements in the NWSRFS Snowmelt model. Recommendations are also made for incorporating soil moisture measurements in NWSRFS. Suggestions are made for incorporating snow covered area, soil moisture, and others in STORM and SSARR. General characteristics of a hydrologic model needed to make maximum use of remotely sensed data are discussed. Suggested goals for improvements in remote sensing for use in models are also established.

  12. The relation between geometry, hydrology and stability of complex hillslopes examined using low-dimensional hydrological models

    NARCIS (Netherlands)

    Talebi, A.

    2008-01-01

    Key words: Hillslope geometry, Hillslope hydrology, Hillslope stability, Complex hillslopes, Modeling shallow landslides, HSB model, HSB-SM model. The hydrologic response of a hillslope to rainfall involves a complex, transient saturated-unsaturated interaction that usually leads to a water table

  13. The relation between geometry, hydrology and stability of complex hillslopes examined using low-dimensional hydrological models

    NARCIS (Netherlands)

    Talebi, A.

    2008-01-01

    Key words: Hillslope geometry, Hillslope hydrology, Hillslope stability, Complex hillslopes, Modeling shallow landslides, HSB model, HSB-SM model. The hydrologic response of a hillslope to rainfall involves a complex, transient saturated-unsaturated interaction that usually leads to a water table

  14. Multivariate data assimilation in an integrated hydrological modelling system

    Science.gov (United States)

    Madsen, Henrik; Zhang, Donghua; Ridler, Marc; Refsgaard, Jens Christian; Høgh Jensen, Karsten

    2016-04-01

    The immensely increasing availability of in-situ and remotely sensed hydrological data has offered new opportunities for monitoring and forecasting water resources by combining observation data with hydrological modelling. Efficient multivariate data assimilation in integrated groundwater - surface water hydrological modelling systems are required to fully utilize and optimally combine the different types of observation data. A particular challenge is the assimilation of observation data of different hydrological variables from different monitoring instruments, representing a wide range of spatial and temporal scales and different levels of uncertainty. A multivariate data assimilation framework has been implemented in the MIKE SHE integrated hydrological modelling system by linking the MIKE SHE code with a generic data assimilation library. The data assimilation library supports different state-of-the-art ensemble-based Kalman filter methods, and includes procedures for localisation, joint state, parameter and model error estimation, and bias-aware filtering. Furthermore, it supports use of different stochastic error models to describe model and measurement errors. Results are presented that demonstrate the use of the data assimilation framework for assimilation of different data types in a catchment-scale MIKE SHE model.

  15. Stochastic modeling of interannual variation of hydrologic variables

    Science.gov (United States)

    Dralle, David; Karst, Nathaniel; Müller, Marc; Vico, Giulia; Thompson, Sally E.

    2017-07-01

    Quantifying the interannual variability of hydrologic variables (such as annual flow volumes, and solute or sediment loads) is a central challenge in hydrologic modeling. Annual or seasonal hydrologic variables are themselves the integral of instantaneous variations and can be well approximated as an aggregate sum of the daily variable. Process-based, probabilistic techniques are available to describe the stochastic structure of daily flow, yet estimating interannual variations in the corresponding aggregated variable requires consideration of the autocorrelation structure of the flow time series. Here we present a method based on a probabilistic streamflow description to obtain the interannual variability of flow-derived variables. The results provide insight into the mechanistic genesis of interannual variability of hydrologic processes. Such clarification can assist in the characterization of ecosystem risk and uncertainty in water resources management. We demonstrate two applications, one quantifying seasonal flow variability and the other quantifying net suspended sediment export.

  16. Advancing Collaboration through Hydrologic Data and Model Sharing

    Science.gov (United States)

    Tarboton, D. G.; Idaszak, R.; Horsburgh, J. S.; Ames, D. P.; Goodall, J. L.; Band, L. E.; Merwade, V.; Couch, A.; Hooper, R. P.; Maidment, D. R.; Dash, P. K.; Stealey, M.; Yi, H.; Gan, T.; Castronova, A. M.; Miles, B.; Li, Z.; Morsy, M. M.

    2015-12-01

    HydroShare is an online, collaborative system for open sharing of hydrologic data, analytical tools, and models. It supports the sharing of and collaboration around "resources" which are defined primarily by standardized metadata, content data models for each resource type, and an overarching resource data model based on the Open Archives Initiative's Object Reuse and Exchange (OAI-ORE) standard and a hierarchical file packaging system called "BagIt". HydroShare expands the data sharing capability of the CUAHSI Hydrologic Information System by broadening the classes of data accommodated to include geospatial and multidimensional space-time datasets commonly used in hydrology. HydroShare also includes new capability for sharing models, model components, and analytical tools and will take advantage of emerging social media functionality to enhance information about and collaboration around hydrologic data and models. It also supports web services and server/cloud based computation operating on resources for the execution of hydrologic models and analysis and visualization of hydrologic data. HydroShare uses iRODS as a network file system for underlying storage of datasets and models. Collaboration is enabled by casting datasets and models as "social objects". Social functions include both private and public sharing, formation of collaborative groups of users, and value-added annotation of shared datasets and models. The HydroShare web interface and social media functions were developed using the Django web application framework coupled to iRODS. Data visualization and analysis is supported through the Tethys Platform web GIS software stack. Links to external systems are supported by RESTful web service interfaces to HydroShare's content. This presentation will introduce the HydroShare functionality developed to date and describe ongoing development of functionality to support collaboration and integration of data and models.

  17. Tuning hydrological models for ecological modeling - improving simulations of low flows critical to stream ecology

    DEFF Research Database (Denmark)

    Olsen, Martin; Troldborg, Lars; Boegh, Eva

    2008-01-01

    The consequences of using simulated discharge from a conventional hydrological model as input in stream physical habitat modelling was investigated using output from the Danish national hydrological model and a physical habitat model of three small streams. It was found that low flow simulation...... errors could have large impact on simulation of physical habitat conditions. If these two models are to be used to assess groundwater abstraction impact on physical habitat conditions the hydrological model should be tuned to the purpose...

  18. Tuning hydrological models for ecological modeling - improving simulations of low flows critical to stream ecology

    DEFF Research Database (Denmark)

    Olsen, Martin; Troldborg, Lars; Boegh, Eva;

    2008-01-01

    The consequences of using simulated discharge from a conventional hydrological model as input in stream physical habitat modelling was investigated using output from the Danish national hydrological model and a physical habitat model of three small streams. It was found that low flow simulation...... errors could have large impact on simulation of physical habitat conditions. If these two models are to be used to assess groundwater abstraction impact on physical habitat conditions the hydrological model should be tuned to the purpose...

  19. Impact of improved snowmelt modelling in a monthly hydrological model.

    Science.gov (United States)

    Folton, Nathalie; Garcia, Florine

    2016-04-01

    The quantification and the management of water resources at the regional scale require hydrological models that are both easy to implement and efficient. To be reliable and robust, these models must be calibrated and validated on a large number of catchments that are representative of various hydro-meteorological conditions, physiographic contexts, and specific hydrological behavior (e.g. mountainous catchments). The GRLoiEau monthly model, with its simple structure and its two free parameters, answer our need of such a simple model. It required the development of a snow routine to model catchments with temporarily snow-covered areas. The snow routine developed here does not claim to represent physical snowmelt processes but rather to simulate them globally on the catchment. The snowmelt equation is based on the degree-day method which is widely used by the hydrological community, in particular in engineering studies (Etchevers 2000). A potential snowmelt (Schaefli et al. 2005) was computed, and the parameters of the snow routine were regionalized for each mountain area. The GRLoiEau parsimonious structure requires meteorological data. They come from the distributed mesoscale atmospheric analysis system SAFRAN, which provides estimations of daily solid and liquid precipitations and temperatures on a regular square grid at the spatial resolution of 8*8 km², throughout France. Potential evapotranspiration was estimated using the formula by Oudin et al. (2005). The aim of this study is to improve the quality of monthly simulations for ungauged basins, in particular for all types of mountain catchments, without increasing the number of free parameters of the model. By using daily SAFRAN data, the production store and snowmelt can be run at a daily time scale. The question then arises whether simulating the monthly flows using a production function at a finer time step would improve the results. And by using the SAFRAN distributed climate series, a distributed approach

  20. Micro- to macroscale perspectives on space plasmas

    Science.gov (United States)

    Eastman, Timothy E.

    1993-01-01

    The Earth's magnetosphere is the most accessible of natural collisionless plasma environments; an astrophysical plasma 'laboratory'. Magnetospheric physics has been in an exploration phase since its origin 35 years ago but new coordinated, multipoint observations, theory, modeling, and simulations are moving this highly interdisciplinary field of plasma science into a new phase of synthesis and understanding. Plasma systems are ones in which binary collisions are relatively negligible and collective behavior beyond the microscale emerges. Most readily accessible natural plasma systems are collisional and nearest-neighbor classical interactions compete with longer-range plasma effects. Except for stars, most space plasmas are collisionless, however, and the effects of electrodynamic coupling dominate. Basic physical processes in such collisionless plasmas occur at micro-, meso-, and macroscales that are not merely reducible to each other in certain crucial ways as illustrated for the global coupling of the Earth's magnetosphere and for the nonlinear dynamics of charged particle motion in the magnetotail. Such global coupling and coherence makes the geospace environment, the domain of solar-terrestrial science, the most highly coupled of all physical geospheres.

  1. Analysing the temporal dynamics of model performance for hydrological models

    Directory of Open Access Journals (Sweden)

    D. E. Reusser

    2008-11-01

    Full Text Available The temporal dynamics of hydrological model performance gives insights into errors that cannot be obtained from global performance measures assigning a single number to the fit of a simulated time series to an observed reference series. These errors can include errors in data, model parameters, or model structure. Dealing with a set of performance measures evaluated at a high temporal resolution implies analyzing and interpreting a high dimensional data set. This paper presents a method for such a hydrological model performance assessment with a high temporal resolution and illustrates its application for two very different rainfall-runoff modeling case studies. The first is the Wilde Weisseritz case study, a headwater catchment in the eastern Ore Mountains, simulated with the conceptual model WaSiM-ETH. The second is the Malalcahuello case study, a headwater catchment in the Chilean Andes, simulated with the physics-based model Catflow. The proposed time-resolved performance assessment starts with the computation of a large set of classically used performance measures for a moving window. The key of the developed approach is a data-reduction method based on self-organizing maps (SOMs and cluster analysis to classify the high-dimensional performance matrix. Synthetic peak errors are used to interpret the resulting error classes. The final outcome of the proposed method is a time series of the occurrence of dominant error types. For the two case studies analyzed here, 6 such error types have been identified. They show clear temporal patterns which can lead to the identification of model structural errors.

  2. Analysing the temporal dynamics of model performance for hydrological models

    Directory of Open Access Journals (Sweden)

    E. Zehe

    2009-07-01

    Full Text Available The temporal dynamics of hydrological model performance gives insights into errors that cannot be obtained from global performance measures assigning a single number to the fit of a simulated time series to an observed reference series. These errors can include errors in data, model parameters, or model structure. Dealing with a set of performance measures evaluated at a high temporal resolution implies analyzing and interpreting a high dimensional data set. This paper presents a method for such a hydrological model performance assessment with a high temporal resolution and illustrates its application for two very different rainfall-runoff modeling case studies. The first is the Wilde Weisseritz case study, a headwater catchment in the eastern Ore Mountains, simulated with the conceptual model WaSiM-ETH. The second is the Malalcahuello case study, a headwater catchment in the Chilean Andes, simulated with the physics-based model Catflow. The proposed time-resolved performance assessment starts with the computation of a large set of classically used performance measures for a moving window. The key of the developed approach is a data-reduction method based on self-organizing maps (SOMs and cluster analysis to classify the high-dimensional performance matrix. Synthetic peak errors are used to interpret the resulting error classes. The final outcome of the proposed method is a time series of the occurrence of dominant error types. For the two case studies analyzed here, 6 such error types have been identified. They show clear temporal patterns, which can lead to the identification of model structural errors.

  3. Hydrological model uncertainty due to spatial evapotranspiration estimation methods

    Science.gov (United States)

    Yu, Xuan; Lamačová, Anna; Duffy, Christopher; Krám, Pavel; Hruška, Jakub

    2016-05-01

    Evapotranspiration (ET) continues to be a difficult process to estimate in seasonal and long-term water balances in catchment models. Approaches to estimate ET typically use vegetation parameters (e.g., leaf area index [LAI], interception capacity) obtained from field observation, remote sensing data, national or global land cover products, and/or simulated by ecosystem models. In this study we attempt to quantify the uncertainty that spatial evapotranspiration estimation introduces into hydrological simulations when the age of the forest is not precisely known. The Penn State Integrated Hydrologic Model (PIHM) was implemented for the Lysina headwater catchment, located 50°03‧N, 12°40‧E in the western part of the Czech Republic. The spatial forest patterns were digitized from forest age maps made available by the Czech Forest Administration. Two ET methods were implemented in the catchment model: the Biome-BGC forest growth sub-model (1-way coupled to PIHM) and with the fixed-seasonal LAI method. From these two approaches simulation scenarios were developed. We combined the estimated spatial forest age maps and two ET estimation methods to drive PIHM. A set of spatial hydrologic regime and streamflow regime indices were calculated from the modeling results for each method. Intercomparison of the hydrological responses to the spatial vegetation patterns suggested considerable variation in soil moisture and recharge and a small uncertainty in the groundwater table elevation and streamflow. The hydrologic modeling with ET estimated by Biome-BGC generated less uncertainty due to the plant physiology-based method. The implication of this research is that overall hydrologic variability induced by uncertain management practices was reduced by implementing vegetation models in the catchment models.

  4. Extended Range Hydrological Predictions: Uncertainty Associated with Model Parametrization

    Science.gov (United States)

    Joseph, J.; Ghosh, S.; Sahai, A. K.

    2016-12-01

    The better understanding of various atmospheric processes has led to improved predictions of meteorological conditions at various temporal scale, ranging from short term which cover a period up to 2 days to long term covering a period of more than 10 days. Accurate prediction of hydrological variables can be done using these predicted meteorological conditions, which would be helpful in proper management of water resources. Extended range hydrological simulation includes the prediction of hydrological variables for a period more than 10 days. The main sources of uncertainty in hydrological predictions include the uncertainty in the initial conditions, meteorological forcing and model parametrization. In the present study, the Extended Range Prediction developed for India for monsoon by Indian Institute of Tropical Meteorology (IITM), Pune is used as meteorological forcing for the Variable Infiltration Capacity (VIC) model. Sensitive hydrological parameters, as derived from literature, along with a few vegetation parameters are assumed to be uncertain and 1000 random values are generated given their prescribed ranges. Uncertainty bands are generated by performing Monte-Carlo Simulations (MCS) for the generated sets of parameters and observed meteorological forcings. The basins with minimum human intervention, within the Indian Peninsular region, are identified and validation of results are carried out using the observed gauge discharge. Further, the uncertainty bands are generated for the extended range hydrological predictions by performing MCS for the same set of parameters and extended range meteorological predictions. The results demonstrate the uncertainty associated with the model parametrisation for the extended range hydrological simulations. Keywords: Extended Range Prediction, Variable Infiltration Capacity model, Monte Carlo Simulation.

  5. The Regional Hydrologic Extremes Assessment System: A software framework for hydrologic modeling and data assimilation.

    Science.gov (United States)

    Andreadis, Konstantinos M; Das, Narendra; Stampoulis, Dimitrios; Ines, Amor; Fisher, Joshua B; Granger, Stephanie; Kawata, Jessie; Han, Eunjin; Behrangi, Ali

    2017-01-01

    The Regional Hydrologic Extremes Assessment System (RHEAS) is a prototype software framework for hydrologic modeling and data assimilation that automates the deployment of water resources nowcasting and forecasting applications. A spatially-enabled database is a key component of the software that can ingest a suite of satellite and model datasets while facilitating the interfacing with Geographic Information System (GIS) applications. The datasets ingested are obtained from numerous space-borne sensors and represent multiple components of the water cycle. The object-oriented design of the software allows for modularity and extensibility, showcased here with the coupling of the core hydrologic model with a crop growth model. RHEAS can exploit multi-threading to scale with increasing number of processors, while the database allows delivery of data products and associated uncertainty through a variety of GIS platforms. A set of three example implementations of RHEAS in the United States and Kenya are described to demonstrate the different features of the system in real-world applications.

  6. Study on the general model of hydrological frequency analysis

    Institute of Scientific and Technical Information of China (English)

    王浩; 秦大庸; 孙济良; 王建华

    2001-01-01

    On the basis of exponential Gamma distribution, this paper presents a model consisting of 11 kinds of distribution curves for the first time. The model contains several frequency curves used commonly in China and other countries, for example, Pearson type-3 distribution, Kritsky and Menkel (USSR) distribution, Logarithmic normal distribution, and so on. Through dealing with parameters, the model may be applicable to the hydrological extreme values of different climate regions, and has very strong flexibility. In this paper, a real case study using flood datum of 240 different hydrological stations in China is submitted and the calculating results are satisfactory.

  7. Use of remote sensing data in distributed hydrological models: Applications in the Senegal river basin

    DEFF Research Database (Denmark)

    Sandholt, Inge; Andersen, Jens; Dybkjær, Gorm Ibsen;

    1999-01-01

    Earth observation, remote sensing, hydrology, distributed hydrological modelling, West Africa, Senegal river basin, land cover, soil moisture, NOAA AVHRR, SPOT, Mike-she......Earth observation, remote sensing, hydrology, distributed hydrological modelling, West Africa, Senegal river basin, land cover, soil moisture, NOAA AVHRR, SPOT, Mike-she...

  8. Reservoir in Global Water Cycle: Macro Scale Hydrologic Modeling for Water Management

    Science.gov (United States)

    Zhou, T.; Nijssen, B.; Haddeland, I.; Gao, H.; Lettenmaier, D. P.

    2014-12-01

    Man-made reservoirs play a key role in the terrestrial water system. They support purposes, such as irrigation, hydropower generation, and flood control, which can substantially change water fluxes at the land surface and redistribute the storage of surface water in space and time. Although most developed countries have sophisticated observing systems for many variables in the natural surface water cycle, long-term and consistent records that focus on water management and human impacts on the global water cycle are much more limited, and most land surface models ignore water management activities. We describe a continental-scale model of reservoir storage, which is combined with a soil moisture deficit-based irrigation scheme within the Variable Infiltration Capacity (VIC) macro-scale hydrological model to simulate the effects of water management in the major river basins of the world. The model is forced with merged NCEP/NCAR and satellite meteorological data at a spatial resolution of 0.25 degrees latitude-longitude, for the period 1948 to 2010. A total of 167 of the largest reservoirs in the world with a total storage capacity around 3900 km3 (nearly 60% of the global total reservoir storage) are simulated. We successfully predict the monthly reservoir storage time series for most of a set of 23 global reservoirs for which observed storage is available either via in situ or satellite remote sensing measurements. We evaluate, on a continental and global basis, the magnitude of inter-seasonal and inter-annual reservoir storage variations in comparison with other terms in the land surface water cycle, including Snow Water Equivalent (SWE) and soil moisture.

  9. Modeling of reservoir operation in UNH global hydrological model

    Science.gov (United States)

    Shiklomanov, Alexander; Prusevich, Alexander; Frolking, Steve; Glidden, Stanley; Lammers, Richard; Wisser, Dominik

    2015-04-01

    Climate is changing and river flow is an integrated characteristic reflecting numerous environmental processes and their changes aggregated over large areas. Anthropogenic impacts on the river flow, however, can significantly exceed the changes associated with climate variability. Besides of irrigation, reservoirs and dams are one of major anthropogenic factor affecting streamflow. They distort hydrological regime of many rivers by trapping of freshwater runoff, modifying timing of river discharge and increasing the evaporation rate. Thus, reservoirs is an integral part of the global hydrological system and their impacts on rivers have to be taken into account for better quantification and understanding of hydrological changes. We developed a new technique, which was incorporated into WBM-TrANS model (Water Balance Model-Transport from Anthropogenic and Natural Systems) to simulate river routing through large reservoirs and natural lakes based on information available from freely accessible databases such as GRanD (the Global Reservoir and Dam database) or NID (National Inventory of Dams for US). Different formulations were applied for unregulated spillway dams and lakes, and for 4 types of regulated reservoirs, which were subdivided based on main purpose including generic (multipurpose), hydropower generation, irrigation and water supply, and flood control. We also incorporated rules for reservoir fill up and draining at the times of construction and decommission based on available data. The model were tested for many reservoirs of different size and types located in various climatic conditions using several gridded meteorological data sets as model input and observed daily and monthly discharge data from GRDC (Global Runoff Data Center), USGS Water Data (US Geological Survey), and UNH archives. The best results with Nash-Sutcliffe model efficiency coefficient in the range of 0.5-0.9 were obtained for temperate zone of Northern Hemisphere where most of large

  10. Towards simplification of hydrologic modeling: Identification of dominant processes

    Science.gov (United States)

    Markstrom, Steven; Hay, Lauren E.; Clark, Martyn P.

    2016-01-01

    The Precipitation–Runoff Modeling System (PRMS), a distributed-parameter hydrologic model, has been applied to the conterminous US (CONUS). Parameter sensitivity analysis was used to identify: (1) the sensitive input parameters and (2) particular model output variables that could be associated with the dominant hydrologic process(es). Sensitivity values of 35 PRMS calibration parameters were computed using the Fourier amplitude sensitivity test procedure on 110 000 independent hydrologically based spatial modeling units covering the CONUS and then summarized to process (snowmelt, surface runoff, infiltration, soil moisture, evapotranspiration, interflow, baseflow, and runoff) and model performance statistic (mean, coefficient of variation, and autoregressive lag 1). Identified parameters and processes provide insight into model performance at the location of each unit and allow the modeler to identify the most dominant process on the basis of which processes are associated with the most sensitive parameters. The results of this study indicate that: (1) the choice of performance statistic and output variables has a strong influence on parameter sensitivity, (2) the apparent model complexity to the modeler can be reduced by focusing on those processes that are associated with sensitive parameters and disregarding those that are not, (3) different processes require different numbers of parameters for simulation, and (4) some sensitive parameters influence only one hydrologic process, while others may influence many

  11. WEB-DHM: A distributed biosphere hydrological model developed by coupling a simple biosphere scheme with a hillslope hydrological model

    Science.gov (United States)

    The coupling of land surface models and hydrological models potentially improves the land surface representation, benefiting both the streamflow prediction capabilities as well as providing improved estimates of water and energy fluxes into the atmosphere. In this study, the simple biosphere model 2...

  12. Understanding uncertainty in process-based hydrological models

    Science.gov (United States)

    Clark, M. P.; Kavetski, D.; Slater, A. G.; Newman, A. J.; Marks, D. G.; Landry, C.; Lundquist, J. D.; Rupp, D. E.; Nijssen, B.

    2013-12-01

    Building an environmental model requires making a series of decisions regarding the appropriate representation of natural processes. While some of these decisions can already be based on well-established physical understanding, gaps in our current understanding of environmental dynamics, combined with incomplete knowledge of properties and boundary conditions of most environmental systems, make many important modeling decisions far more ambiguous. There is consequently little agreement regarding what a 'correct' model structure is, especially at relatively larger spatial scales such as catchments and beyond. In current practice, faced with such a range of decisions, different modelers will generally make different modeling decisions, often on an ad hoc basis, based on their balancing of process understanding, the data available to evaluate the model, the purpose of the modeling exercise, and their familiarity with or investment in an existing model infrastructure. This presentation describes development and application of multiple-hypothesis models to evaluate process-based hydrologic models. Our numerical model uses robust solutions of the hydrology and thermodynamic governing equations as the structural core, and incorporates multiple options to represent the impact of different modeling decisions, including multiple options for model parameterizations (e.g., below-canopy wind speed, thermal conductivity, storage and transmission of liquid water through soil, etc.), as well as multiple options for model architecture, that is, the coupling and organization of different model components (e.g., representations of sub-grid variability and hydrologic connectivity, coupling with groundwater, etc.). Application of this modeling framework across a collection of different research basins demonstrates that differences among model parameterizations are often overwhelmed by differences among equally-plausible model parameter sets, while differences in model architecture lead

  13. Modelling of green roof hydrological performance for urban drainage applications

    DEFF Research Database (Denmark)

    Locatelli, Luca; Mark, Ole; Mikkelsen, Peter Steen

    2014-01-01

    Green roofs are being widely implemented for stormwater management and their impact on the urban hydrological cycle can be evaluated by incorporating them into urban drainage models. This paper presents a model of green roof long term and single event hydrological performance. The model includes...... from 3 different extensive sedum roofs in Denmark. These data consist of high-resolution measurements of runoff, precipitation and atmospheric variables in the period 2010–2012. The hydrological response of green roofs was quantified based on statistical analysis of the results of a 22-year (1989...... and that the mean annual runoff is not linearly related to the storage. Green roofs have therefore the potential to be important parts of future urban stormwater management plans....

  14. Comparing spatial and temporal transferability of hydrological model parameters

    Science.gov (United States)

    Patil, Sopan D.; Stieglitz, Marc

    2015-06-01

    Operational use of hydrological models requires the transfer of calibrated parameters either in time (for streamflow forecasting) or space (for prediction at ungauged catchments) or both. Although the effects of spatial and temporal parameter transfer on catchment streamflow predictions have been well studied individually, a direct comparison of these approaches is much less documented. Here, we compare three different schemes of parameter transfer, viz., temporal, spatial, and spatiotemporal, using a spatially lumped hydrological model called EXP-HYDRO at 294 catchments across the continental United States. Results show that the temporal parameter transfer scheme performs best, with lowest decline in prediction performance (median decline of 4.2%) as measured using the Kling-Gupta efficiency metric. More interestingly, negligible difference in prediction performance is observed between the spatial and spatiotemporal parameter transfer schemes (median decline of 12.4% and 13.9% respectively). We further demonstrate that the superiority of temporal parameter transfer scheme is preserved even when: (1) spatial distance between donor and receiver catchments is reduced, or (2) temporal lag between calibration and validation periods is increased. Nonetheless, increase in the temporal lag between calibration and validation periods reduces the overall performance gap between the three parameter transfer schemes. Results suggest that spatiotemporal transfer of hydrological model parameters has the potential to be a viable option for climate change related hydrological studies, as envisioned in the "trading space for time" framework. However, further research is still needed to explore the relationship between spatial and temporal aspects of catchment hydrological variability.

  15. Refining the Committee Approach and Uncertainty Prediction in Hydrological Modelling

    NARCIS (Netherlands)

    Kayastha, N.

    2014-01-01

    Due to the complexity of hydrological systems a single model may be unable to capture the full range of a catchment response and accurately predict the streamflows. The multi modelling approach opens up possibilities for handling such difficulties and allows improve the predictive capability of mode

  16. Refining the committee approach and uncertainty prediction in hydrological modelling

    NARCIS (Netherlands)

    Kayastha, N.

    2014-01-01

    Due to the complexity of hydrological systems a single model may be unable to capture the full range of a catchment response and accurately predict the streamflows. The multi modelling approach opens up possibilities for handling such difficulties and allows improve the predictive capability of mode

  17. GIS-Based Hydrological Modelling Using Swat: Case Study of ...

    African Journals Online (AJOL)

    GIS-Based Hydrological Modelling Using Swat: Case Study of Upstream Watershed of ... Log in or Register to get access to full text downloads. ... of SWAT model interfaced with GIS software (MapWindow) in the prediction of stream flow of a ...

  18. Hydrologic and water quality terminology as applied to modeling

    Science.gov (United States)

    A survey of literature and examination in particular of terminology use in a previous special collection of modeling calibration and validation papers has been conducted to arrive at a list of consistent terminology recommended for writing about hydrologic and water quality model calibration and val...

  19. Refining the Committee Approach and Uncertainty Prediction in Hydrological Modelling

    NARCIS (Netherlands)

    Kayastha, N.

    2014-01-01

    Due to the complexity of hydrological systems a single model may be unable to capture the full range of a catchment response and accurately predict the streamflows. The multi modelling approach opens up possibilities for handling such difficulties and allows improve the predictive capability of mode

  20. Refining the committee approach and uncertainty prediction in hydrological modelling

    NARCIS (Netherlands)

    Kayastha, N.

    2014-01-01

    Due to the complexity of hydrological systems a single model may be unable to capture the full range of a catchment response and accurately predict the streamflows. The multi modelling approach opens up possibilities for handling such difficulties and allows improve the predictive capability of mode

  1. Modellierung of meso- and macroscale river basins - a workshop held at Lauenburg; Modellierung in meso- bis makroskaligen Flusseinzugsgebieten - Tagungsband zum gleichnamigen Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sutmoeller, J.; Raschke, E. (eds.) [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Atmosphaerenphysik

    2001-07-01

    During the past decade measuring and modelling of global and regional processes that exchange energy and water in the climate system of the Earth became a focus in hydrological and meteorological research. Besides climate research many more applications will gain from this effort, e.g. as weather forecasting, water management and agriculture. As large scale weather and climate applications diversify to water related issues such as water resources, reservoir management, and flood and drought forecasting hydrologists and meteorologists are challenged to work interdisciplinary. The workshop 'Modelling of meso- and macroscale river basins' brought together various current aspects of this issue, ranging from coupled atmosphere-hydrology models to integrated river basin management to land use change. Recent results are introduced and summarised in this report. (orig.)

  2. Hydrologic and Water Quality Model Development Using Simulink

    Directory of Open Access Journals (Sweden)

    James D. Bowen

    2014-11-01

    Full Text Available A stormwater runoff model based on the Soil Conservation Service (SCS method and a finite-volume based water quality model have been developed to investigate the use of Simulink for use in teaching and research. Simulink, a MATLAB extension, is a graphically based model development environment for system modeling and simulation. Widely used for mechanical and electrical systems, Simulink has had less use for modeling of hydrologic systems. The watershed model is being considered for use in teaching graduate-level courses in hydrology and/or stormwater modeling. Simulink’s block (data process and arrow (data transfer object model, the copy and paste user interface, the large number of existing blocks, and the absence of computer code allows students to become model developers almost immediately. The visual depiction of systems, their component subsystems, and the flow of data through the systems are ideal attributes for hands-on teaching of hydrologic and mass balance processes to today’s computer-savvy visual learners. Model development with Simulink for research purposes is also investigated. A finite volume, multi-layer pond model using the water quality kinetics present in CE-QUAL-W2 has been developed using Simulink. The model is one of the first uses of Simulink for modeling eutrophication dynamics in stratified natural systems. The model structure and a test case are presented. One use of the model for teaching a graduate-level water quality modeling class is also described.

  3. Neural Networks for Hydrological Modeling Tool for Operational Purposes

    Science.gov (United States)

    Bhatt, Divya; Jain, Ashu

    2010-05-01

    Hydrological models are useful in many water resources applications such as flood control, irrigation and drainage, hydro power generation, water supply, erosion and sediment control, etc. Estimates of runoff are needed in many water resources planning, design development, operation and maintenance activities. Runoff is generally computed using rainfall-runoff models. Computer based hydrologic models have become popular for obtaining hydrological forecasts and for managing water systems. Rainfall-runoff library (RRL) is computer software developed by Cooperative Research Centre for Catchment Hydrology (CRCCH), Australia consisting of five different conceptual rainfall-runoff models, and has been in operation in many water resources applications in Australia. Recently, soft artificial intelligence tools such as Artificial Neural Networks (ANNs) have become popular for research purposes but have not been adopted in operational hydrological forecasts. There is a strong need to develop ANN models based on real catchment data and compare them with the conceptual models actually in use in real catchments. In this paper, the results from an investigation on the use of RRL and ANNs are presented. Out of the five conceptual models in the RRL toolkit, SimHyd model has been used. Genetic Algorithm has been used as an optimizer in the RRL to calibrate the SimHyd model. Trial and error procedures were employed to arrive at the best values of various parameters involved in the GA optimizer to develop the SimHyd model. The results obtained from the best configuration of the SimHyd model are presented here. Feed-forward neural network model structure trained by back-propagation training algorithm has been adopted here to develop the ANN models. The daily rainfall and runoff data derived from Bird Creek Basin, Oklahoma, USA have been employed to develop all the models included here. A wide range of error statistics have been used to evaluate the performance of all the models

  4. Simulating the hydrologic cycle in coal mining subsidence areas with a distributed hydrologic model

    Science.gov (United States)

    Wang, Jianhua; Lu, Chuiyu; Sun, Qingyan; Xiao, Weihua; Cao, Guoliang; Li, Hui; Yan, Lingjia; Zhang, Bo

    2017-01-01

    Large-scale ground subsidence caused by coal mining and subsequent water-filling leads to serious environmental problems and economic losses, especially in plains with a high phreatic water level. Clarifying the hydrologic cycle in subsidence areas has important practical value for environmental remediation, and provides a scientific basis for water resource development and utilisation of the subsidence areas. Here we present a simulation approach to describe interactions between subsidence area water (SW) and several hydrologic factors from the River-Subsidence-Groundwater Model (RSGM), which is developed based on the distributed hydrologic model. Analysis of water balance shows that the recharge of SW from groundwater only accounts for a small fraction of the total water source, due to weak groundwater flow in the plain. The interaction between SW and groundwater has an obvious annual cycle. The SW basically performs as a net source of groundwater in the wet season, and a net sink for groundwater in the dry season. The results show there is an average 905.34 million m3 per year of water available through the Huainan coal mining subsidence areas (HCMSs). If these subsidence areas can be integrated into water resource planning, the increasingly precarious water supply infrastructure will be strengthened. PMID:28106048

  5. Assessing the hydrologic restoration of an urbanized area via an integrated distributed hydrological model

    Science.gov (United States)

    Trinh, D. H.; Chui, T. F. M.

    2013-12-01

    Green structures (e.g. green roof and bio-retention systems) are adopted to mitigate the hydrological impacts of urbanization. However, our current understanding of urbanization impacts are often process-specific (e.g. peak flow or storm recession), and our characterizations of green structures are often on a local scale. This study uses an integrated distributed hydrological model, Mike SHE, to evaluate the urbanization impacts on both overall water balance and water regime, and also the effectiveness of green structures at a catchment level. Three simulations are carried out for a highly urbanized catchment in the tropics, representing pre-urbanized, urbanized and restored conditions. Urbanization transforms vegetated areas into impervious surfaces, resulting in 20 and 66% reductions in infiltration and base flow respectively, and 60 to 100% increase in peak outlet discharge. Green roofs delay the peak outlet discharge by 2 h and reduce the magnitude by 50%. Bio-retention systems mitigate the peak discharge by 50% and also enhance infiltration by 30%. The combination of green roofs and bio-retention systems even reduces the peak discharge to the pre-urbanized level. The simulation results obtained are independent of field data, enabling a generic model for understanding hydrological changes during the different phases of urbanization. This will benefit catchment-level planning of green structures in other urban areas.

  6. Simulating the hydrologic cycle in coal mining subsidence areas with a distributed hydrologic model

    Science.gov (United States)

    Wang, Jianhua; Lu, Chuiyu; Sun, Qingyan; Xiao, Weihua; Cao, Guoliang; Li, Hui; Yan, Lingjia; Zhang, Bo

    2017-01-01

    Large-scale ground subsidence caused by coal mining and subsequent water-filling leads to serious environmental problems and economic losses, especially in plains with a high phreatic water level. Clarifying the hydrologic cycle in subsidence areas has important practical value for environmental remediation, and provides a scientific basis for water resource development and utilisation of the subsidence areas. Here we present a simulation approach to describe interactions between subsidence area water (SW) and several hydrologic factors from the River-Subsidence-Groundwater Model (RSGM), which is developed based on the distributed hydrologic model. Analysis of water balance shows that the recharge of SW from groundwater only accounts for a small fraction of the total water source, due to weak groundwater flow in the plain. The interaction between SW and groundwater has an obvious annual cycle. The SW basically performs as a net source of groundwater in the wet season, and a net sink for groundwater in the dry season. The results show there is an average 905.34 million m3 per year of water available through the Huainan coal mining subsidence areas (HCMSs). If these subsidence areas can be integrated into water resource planning, the increasingly precarious water supply infrastructure will be strengthened.

  7. Assessing the hydrologic restoration of an urbanized area via integrated distributed hydrological model

    Directory of Open Access Journals (Sweden)

    D. H. Trinh

    2013-04-01

    Full Text Available Green structures (e.g. green roof and bio-retention systems are adopted to mitigate the hydrological impacts of urbanization. However, our current understanding of the urbanization impacts are often process-specific (e.g. peak flow or storm recession, and our characterizations of green structures are often on a local scale. This study uses an integrated distributed hydrological model, Mike SHE, to evaluate the urbanization impacts on both overall water balance and water regime, and also the effectiveness of green structures at a catchment level. Three simulations are carried out for a highly urbanized catchment in the tropics, representing pre-urbanized, urbanized and restored conditions. Urbanization transforms vegetated areas into impervious surfaces, resulting in 20 and 66% reductions in infiltration and base flow respectively, and 60 to 100% increase in peak outlet discharge. Green roofs delay the peak outlet discharge by 2 h and reduce the magnitude by 50%. Bio-retention systems mitigate the peak discharge by 50% and also enhance infiltration by 30%. The combination of green roofs and bio-retention systems even reduces the peak discharge to the pre-urbanized level. The simulation results obtained are independent of field data, enabling a generic model for understanding hydrological changes during the different phases of urbanization. This will benefit catchment level planning of green structures in other urban areas.

  8. Integrating Geophysics, Geology, and Hydrology for Enhanced Hydrogeological Modeling

    Science.gov (United States)

    Auken, E.

    2012-12-01

    Geophysical measurements are important for providing information on the geological structure to hydrological models. Regional scale surveys, where several watersheds are mapped at the same time using helicopter borne transient electromagnetic, results in a geophysical model with a very high lateral and vertical resolution of the geological layers. However, there is a bottleneck when it comes to integrating the information from the geophysical models into the hydrological model. This transformation is difficult, because there is not a simple relationship between the hydraulic conductivity needed for the hydrological model and the electrical conductivity measured by the geophysics. In 2012 the Danish Council for Strategic Research has funded a large research project focusing on the problem of integrating geophysical models into hydrological models. The project involves a number of Danish research institutions, consulting companies, a water supply company, as well as foreign partners, USGS (USA), TNO (Holland) and CSIRO (Australia). In the project we will: 1. Use statistical methods to describe the spatial correlation between the geophysical and the lithological/hydrological data; 2. Develop semi-automatic or automatic methods for transforming spatially sampled geophysical data into geological- and/or groundwater-model parameter fields; 3. Develop an inversion method for large-scale geophysical surveys in which the model space is concordant with the hydrological model space 4. Demonstrate the benefits of spatially distributed geophysical data for informing and updating groundwater models and increasing the predictive power of management scenarios. 5. Develop a new receiver system for Magnetic Resonance Sounding data and further enhance the resolution capability of data from the SkyTEM system. 6. In test areas in Denmark, Holland, USA and Australia we will use data from existing airborne geophysical data, hydrological and geological data and also collect new airborne

  9. Flood Modelling of Banjir Kanal Barat (Integration of Hydrology Model and GIS

    Directory of Open Access Journals (Sweden)

    Muhammad Aris Marfai

    2004-01-01

    Full Text Available Hydrological modelling has an advantage on river flood study. Hydrological factors can be easily determined and calculated using hydrological model. HEC-RAS (Hydrological Engineering Centre-River Analysis System software is well known as hydrological modelling software for flood simulation and encroachment analysis of the floodplain area. For spatial performance and analysis of flood, the integration of the Geographic Information Systems (GIS and hydrological model is needed. The aims of this research are 1 to perform a flood encroachment using HEC-RAS software, and 2 to generate a flood hazard map. The methodology for this research omprise of 1 generating geometric data as a requirement of the data input on HEC-RAS hydrological model, 2 Hydrological data inputting, 3 generating of the flood encroachment analysis, and 4 transformation of flood encroachment into flood hazard map. The spatial pattern of the flood hazard is illustrated in a map. The result shows that hydrological model as integration with GIS can be used for flood hazard map generation. This method has advantages on the calculation of the hydrological factors of flood and spatial performance of the flood hazard map. For further analysis, the landuse map can be used on the overlay operation with the flood hazard map in order to obtain the impact of the flood on the landuse.

  10. Hybrid models for hydrological forecasting: integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following top

  11. Hybrid models for hydrological forecasting: Integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following top

  12. Hybrid models for hydrological forecasting: integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following

  13. Hybrid models for hydrological forecasting: Integration of data-driven and conceptual modelling techniques

    NARCIS (Netherlands)

    Corzo Perez, G.A.

    2009-01-01

    This book presents the investigation of different architectures of integrating hydrological knowledge and models with data-driven models for the purpose of hydrological flow forecasting. The models resulting from such integration are referred to as hybrid models. The book addresses the following

  14. [A new precipitation distribution hydrological model and its application].

    Science.gov (United States)

    Zhang, Shengtang; Kang, Shaozhong; Liu, Yin

    2005-03-01

    In distribution hydrological models, precipitation is the key input data for analyzing and computing hydrological processes. Finding a way to produce distribution precipitation data is a hotspot in hydrological research. This paper presented the hypothesis that the distribution of precipitation on the earth surface is the result of the effects of atmosphere system and terrain. Moreover, the spatial distribution of natural precipitation is a group of concentric ovals on the flat earth surface, and has a definite centre with maximum precipitation not affected by terrain. Supporting by the hypothesis, this paper established a new precipitation distribution hydrological model which could simulate the spatial distribution of precipitation, and modified the terrain effect on precipitation through Newton interpolation. The position of the precipitation centre and its precipitation amount were simulated in first time, and thus, the model could have a practical value in basin storm analysis and real-time runoff forecasting. The model was tested by the precipitation data of the Xichuan river basin in the Loess Plateau, which indicated that the model had a high precision.

  15. Comparing spatial and temporal transferability of hydrological model parameters

    Science.gov (United States)

    Patil, Sopan; Stieglitz, Marc

    2015-04-01

    Operational use of hydrological models requires the transfer of calibrated parameters either in time (for streamflow forecasting) or space (for prediction at ungauged catchments) or both. Although the effects of spatial and temporal parameter transfer on catchment streamflow predictions have been well studied individually, a direct comparison of these approaches is much less documented. In our view, such comparison is especially pertinent in the context of increasing appeal and popularity of the "trading space for time" approaches that are proposed for assessing the hydrological implications of anthropogenic climate change. Here, we compare three different schemes of parameter transfer, viz., temporal, spatial, and spatiotemporal, using a spatially lumped hydrological model called EXP-HYDRO at 294 catchments across the continental United States. Results show that the temporal parameter transfer scheme performs best, with lowest decline in prediction performance (median decline of 4.2%) as measured using the Kling-Gupta efficiency metric. More interestingly, negligible difference in prediction performance is observed between the spatial and spatiotemporal parameter transfer schemes (median decline of 12.4% and 13.9% respectively). We further demonstrate that the superiority of temporal parameter transfer scheme is preserved even when: (1) spatial distance between donor and receiver catchments is reduced, or (2) temporal lag between calibration and validation periods is increased. Nonetheless, increase in the temporal lag between calibration and validation periods reduces the overall performance gap between the three parameter transfer schemes. Results suggest that spatiotemporal transfer of hydrological model parameters has the potential to be a viable option for climate change related hydrological studies, as envisioned in the "trading space for time" framework. However, further research is still needed to explore the relationship between spatial and temporal

  16. Bayesian estimation of parameters in a regional hydrological model

    Directory of Open Access Journals (Sweden)

    K. Engeland

    2002-01-01

    Full Text Available This study evaluates the applicability of the distributed, process-oriented Ecomag model for prediction of daily streamflow in ungauged basins. The Ecomag model is applied as a regional model to nine catchments in the NOPEX area, using Bayesian statistics to estimate the posterior distribution of the model parameters conditioned on the observed streamflow. The distribution is calculated by Markov Chain Monte Carlo (MCMC analysis. The Bayesian method requires formulation of a likelihood function for the parameters and three alternative formulations are used. The first is a subjectively chosen objective function that describes the goodness of fit between the simulated and observed streamflow, as defined in the GLUE framework. The second and third formulations are more statistically correct likelihood models that describe the simulation errors. The full statistical likelihood model describes the simulation errors as an AR(1 process, whereas the simple model excludes the auto-regressive part. The statistical parameters depend on the catchments and the hydrological processes and the statistical and the hydrological parameters are estimated simultaneously. The results show that the simple likelihood model gives the most robust parameter estimates. The simulation error may be explained to a large extent by the catchment characteristics and climatic conditions, so it is possible to transfer knowledge about them to ungauged catchments. The statistical models for the simulation errors indicate that structural errors in the model are more important than parameter uncertainties. Keywords: regional hydrological model, model uncertainty, Bayesian analysis, Markov Chain Monte Carlo analysis

  17. Legacy model integration for enhancing hydrologic interdisciplinary research

    Science.gov (United States)

    Dozier, A.; Arabi, M.; David, O.

    2013-12-01

    Many challenges are introduced to interdisciplinary research in and around the hydrologic science community due to advances in computing technology and modeling capabilities in different programming languages, across different platforms and frameworks by researchers in a variety of fields with a variety of experience in computer programming. Many new hydrologic models as well as optimization, parameter estimation, and uncertainty characterization techniques are developed in scripting languages such as Matlab, R, Python, or in newer languages such as Java and the .Net languages, whereas many legacy models have been written in FORTRAN and C, which complicates inter-model communication for two-way feedbacks. However, most hydrologic researchers and industry personnel have little knowledge of the computing technologies that are available to address the model integration process. Therefore, the goal of this study is to address these new challenges by utilizing a novel approach based on a publish-subscribe-type system to enhance modeling capabilities of legacy socio-economic, hydrologic, and ecologic software. Enhancements include massive parallelization of executions and access to legacy model variables at any point during the simulation process by another program without having to compile all the models together into an inseparable 'super-model'. Thus, this study provides two-way feedback mechanisms between multiple different process models that can be written in various programming languages and can run on different machines and operating systems. Additionally, a level of abstraction is given to the model integration process that allows researchers and other technical personnel to perform more detailed and interactive modeling, visualization, optimization, calibration, and uncertainty analysis without requiring deep understanding of inter-process communication. To be compatible, a program must be written in a programming language with bindings to a common

  18. Hydrologic predictions in a changing environment: behavioral modeling

    Directory of Open Access Journals (Sweden)

    B. Schaefli

    2010-10-01

    Full Text Available Most hydrological models are valid at most only in a few places and cannot be reasonably transferred to other places or to far distant time periods. Transfer in space is difficult because the models are conditioned on past observations at particular places to define parameter values and unobservable processes that are needed to fully characterize the structure and functioning of the landscape. Transfer in time has to deal with the likely temporal changes to both parameters and processes under future changed conditions. This remains an important obstacle to addressing some of the most urgent prediction questions in hydrology, such as prediction in ungauged basins and prediction under global change. In this paper, we propose a new approach to catchment hydrological modeling, based on universal principles that do not change in time and that remain valid across many places. The key to this framework, which we call behavioral modeling, is to assume that these universal and time-invariant organizing principles can be used to identify the most appropriate model structure (including parameter values and responses for a given ecosystem at a given moment in time. The organizing principles may be derived from fundamental physical or biological laws, or from empirical laws that have been demonstrated to be time-invariant and to hold at many places and scales. Much fundamental research remains to be undertaken to help discover these organizing principles on the basis of exploration of observed patterns of landscape structure and hydrological behavior and their interpretation as legacy effects of past co-evolution of climate, soils, topography, vegetation and humans. Our hope is that the new behavioral modeling framework will be a step forward towards a new vision for hydrology where models are capable of more confidently predicting the behavior of catchments beyond what has been observed or experienced before.

  19. HESS Opinions: Hydrologic predictions in a changing environment: behavioral modeling

    Directory of Open Access Journals (Sweden)

    S. J. Schymanski

    2011-02-01

    Full Text Available Most hydrological models are valid at most only in a few places and cannot be reasonably transferred to other places or to far distant time periods. Transfer in space is difficult because the models are conditioned on past observations at particular places to define parameter values and unobservable processes that are needed to fully characterize the structure and functioning of the landscape. Transfer in time has to deal with the likely temporal changes to both parameters and processes under future changed conditions. This remains an important obstacle to addressing some of the most urgent prediction questions in hydrology, such as prediction in ungauged basins and prediction under global change. In this paper, we propose a new approach to catchment hydrological modeling, based on universal principles that do not change in time and that remain valid across many places. The key to this framework, which we call behavioral modeling, is to assume that there are universal and time-invariant organizing principles that can be used to identify the most appropriate model structure (including parameter values and responses for a given ecosystem at a given moment in time. These organizing principles may be derived from fundamental physical or biological laws, or from empirical laws that have been demonstrated to be time-invariant and to hold at many places and scales. Much fundamental research remains to be undertaken to help discover these organizing principles on the basis of exploration of observed patterns of landscape structure and hydrological behavior and their interpretation as legacy effects of past co-evolution of climate, soils, topography, vegetation and humans. Our hope is that the new behavioral modeling framework will be a step forward towards a new vision for hydrology where models are capable of more confidently predicting the behavior of catchments beyond what has been observed or experienced before.

  20. Reducing equifinality of hydrological models by integrating Functional Streamflow Disaggregation

    Science.gov (United States)

    Lüdtke, Stefan; Apel, Heiko; Nied, Manuela; Carl, Peter; Merz, Bruno

    2014-05-01

    A universal problem of the calibration of hydrological models is the equifinality of different parameter sets derived from the calibration of models against total runoff values. This is an intrinsic problem stemming from the quality of the calibration data and the simplified process representation by the model. However, discharge data contains additional information which can be extracted by signal processing methods. An analysis specifically developed for the disaggregation of runoff time series into flow components is the Functional Streamflow Disaggregation (FSD; Carl & Behrendt, 2008). This method is used in the calibration of an implementation of the hydrological model SWIM in a medium sized watershed in Thailand. FSD is applied to disaggregate the discharge time series into three flow components which are interpreted as base flow, inter-flow and surface runoff. In addition to total runoff, the model is calibrated against these three components in a modified GLUE analysis, with the aim to identify structural model deficiencies, assess the internal process representation and to tackle equifinality. We developed a model dependent (MDA) approach calibrating the model runoff components against the FSD components, and a model independent (MIA) approach comparing the FSD of the model results and the FSD of calibration data. The results indicate, that the decomposition provides valuable information for the calibration. Particularly MDA highlights and discards a number of standard GLUE behavioural models underestimating the contribution of soil water to river discharge. Both, MDA and MIA yield to a reduction of the parameter ranges by a factor up to 3 in comparison to standard GLUE. Based on these results, we conclude that the developed calibration approach is able to reduce the equifinality of hydrological model parameterizations. The effect on the uncertainty of the model predictions is strongest by applying MDA and shows only minor reductions for MIA. Besides

  1. Do land parameters matter in large-scale hydrological modelling?

    Science.gov (United States)

    Gudmundsson, Lukas; Seneviratne, Sonia I.

    2013-04-01

    Many of the most pending issues in large-scale hydrology are concerned with predicting hydrological variability at ungauged locations. However, current-generation hydrological and land surface models that are used for their estimation suffer from large uncertainties. These models rely on mathematical approximations of the physical system as well as on mapped values of land parameters (e.g. topography, soil types, land cover) to predict hydrological variables (e.g. evapotranspiration, soil moisture, stream flow) as a function of atmospheric forcing (e.g. precipitation, temperature, humidity). Despite considerable progress in recent years, it remains unclear whether better estimates of land parameters can improve predictions - or - if a refinement of model physics is necessary. To approach this question we suggest scrutinizing our perception of hydrological systems by confronting it with the radical assumption that hydrological variability at any location in space depends on past and present atmospheric forcing only, and not on location-specific land parameters. This so called "Constant Land Parameter Hypothesis (CLPH)" assumes that variables like runoff can be predicted without taking location specific factors such as topography or soil types into account. We demonstrate, using a modern statistical tool, that monthly runoff in Europe can be skilfully estimated using atmospheric forcing alone, without accounting for locally varying land parameters. The resulting runoff estimates are used to benchmark state-of-the-art process models. These are found to have inferior performance, despite their explicit process representation, which accounts for locally varying land parameters. This suggests that progress in the theory of hydrological systems is likely to yield larger improvements in model performance than more precise land parameter estimates. The results also question the current modelling paradigm that is dominated by the attempt to account for locally varying land

  2. Impact of multicollinearity on small sample hydrologic regression models

    Science.gov (United States)

    Kroll, Charles N.; Song, Peter

    2013-06-01

    Often hydrologic regression models are developed with ordinary least squares (OLS) procedures. The use of OLS with highly correlated explanatory variables produces multicollinearity, which creates highly sensitive parameter estimators with inflated variances and improper model selection. It is not clear how to best address multicollinearity in hydrologic regression models. Here a Monte Carlo simulation is developed to compare four techniques to address multicollinearity: OLS, OLS with variance inflation factor screening (VIF), principal component regression (PCR), and partial least squares regression (PLS). The performance of these four techniques was observed for varying sample sizes, correlation coefficients between the explanatory variables, and model error variances consistent with hydrologic regional regression models. The negative effects of multicollinearity are magnified at smaller sample sizes, higher correlations between the variables, and larger model error variances (smaller R2). The Monte Carlo simulation indicates that if the true model is known, multicollinearity is present, and the estimation and statistical testing of regression parameters are of interest, then PCR or PLS should be employed. If the model is unknown, or if the interest is solely on model predictions, is it recommended that OLS be employed since using more complicated techniques did not produce any improvement in model performance. A leave-one-out cross-validation case study was also performed using low-streamflow data sets from the eastern United States. Results indicate that OLS with stepwise selection generally produces models across study regions with varying levels of multicollinearity that are as good as biased regression techniques such as PCR and PLS.

  3. Sharing hydrological knowledge: an international comparison of hydrological models in the Meuse River Basin

    Science.gov (United States)

    Bouaziz, Laurène; Sperna Weiland, Frederiek; Drogue, Gilles; Brauer, Claudia; Weerts, Albrecht

    2015-04-01

    International collaboration between institutes and universities working and studying the same transboundary basin is needed for consensus building around possible effects of climate change and climate adaptation measures. Education, experience and expert knowledge of the hydrological community have resulted in the development of a great variety of model concepts, calibration and analysis techniques. Intercomparison could be a first step into consensus modeling or an ensemble based modeling strategy. Besides these practical objectives, such an intercomparison offers the opportunity to explore different ranges of models and learn from each other, hopefully increasing the insight into the hydrological processes that play a role in the transboundary basin. In this experiment, different international research groups applied their rainfall-runoff model in the Ourthe, a Belgium sub-catchment of the Meuse. Data preparation involved the interpolation of hourly precipitation station data collected and owned by the Service Public de Wallonie1 and the freely available E-OBS dataset for daily temperature (Haylock et al., 2008). Daily temperature was disaggregated to hourly values and potential evaporation was derived with the Hargreaves formula. The data was made available to the researchers through an FTP server. The protocol for the modeling involved a split-sample calibration and validation for pre-defined periods. Objective functions for calibration were fixed but the calibration algorithm was a free choice of the research groups. The selection of calibration algorithm was considered model dependent because lumped as well as computationally less efficient distributed models were used. For each model, an ensemble of best performing parameter sets was selected and several performance metrics enabled to assess the models' abilities to simulate discharge. The aim of this experiment is to identify those model components and structures that increase model performance and may best

  4. Green roof hydrologic performance and modeling: a review.

    Science.gov (United States)

    Li, Yanling; Babcock, Roger W

    2014-01-01

    Green roofs reduce runoff from impervious surfaces in urban development. This paper reviews the technical literature on green roof hydrology. Laboratory experiments and field measurements have shown that green roofs can reduce stormwater runoff volume by 30 to 86%, reduce peak flow rate by 22 to 93% and delay the peak flow by 0 to 30 min and thereby decrease pollution, flooding and erosion during precipitation events. However, the effectiveness can vary substantially due to design characteristics making performance predictions difficult. Evaluation of the most recently published study findings indicates that the major factors affecting green roof hydrology are precipitation volume, precipitation dynamics, antecedent conditions, growth medium, plant species, and roof slope. This paper also evaluates the computer models commonly used to simulate hydrologic processes for green roofs, including stormwater management model, soil water atmosphere and plant, SWMS-2D, HYDRUS, and other models that are shown to be effective for predicting precipitation response and economic benefits. The review findings indicate that green roofs are effective for reduction of runoff volume and peak flow, and delay of peak flow, however, no tool or model is available to predict expected performance for any given anticipated system based on design parameters that directly affect green roof hydrology.

  5. Integrated landscape/hydrologic modeling tool for semiarid watersheds

    Science.gov (United States)

    Mariano Hernandez; Scott N. Miller

    2000-01-01

    An integrated hydrologic modeling/watershed assessment tool is being developed to aid in determining the susceptibility of semiarid landscapes to natural and human-induced changes across a range of scales. Watershed processes are by definition spatially distributed and are highly variable through time, and this approach is designed to account for their spatial and...

  6. Data assimilation in integrated hydrological modeling using ensemble Kalman filtering

    DEFF Research Database (Denmark)

    Rasmussen, Jørn; Madsen, H.; Jensen, Karsten Høgh

    2015-01-01

    Groundwater head and stream discharge is assimilated using the ensemble transform Kalman filter in an integrated hydrological model with the aim of studying the relationship between the filter performance and the ensemble size. In an attempt to reduce the required number of ensemble members...

  7. Evaluating hydrological model performance using information theory-based metrics

    Science.gov (United States)

    The accuracy-based model performance metrics not necessarily reflect the qualitative correspondence between simulated and measured streamflow time series. The objective of this work was to use the information theory-based metrics to see whether they can be used as complementary tool for hydrologic m...

  8. Information and complexity measures for hydrologic model evaluation

    Science.gov (United States)

    Hydrological models are commonly evaluated through the residual-based performance measures such as the root-mean square error or efficiency criteria. Such measures, however, do not evaluate the degree of similarity of patterns in simulated and measured time series. The objective of this study was to...

  9. Data assimilation in integrated hydrological modeling using ensemble Kalman filtering

    DEFF Research Database (Denmark)

    Rasmussen, Jørn; Madsen, H.; Jensen, Karsten Høgh;

    2015-01-01

    Groundwater head and stream discharge is assimilated using the ensemble transform Kalman filter in an integrated hydrological model with the aim of studying the relationship between the filter performance and the ensemble size. In an attempt to reduce the required number of ensemble members...

  10. Uncertainty propagation in urban hydrology water quality modelling

    NARCIS (Netherlands)

    Torres Matallana, Arturo; Leopold, U.; Heuvelink, G.B.M.

    2016-01-01

    Uncertainty is often ignored in urban hydrology modelling. Engineering practice typically ignores uncertainties and uncertainty propagation. This can have large impacts, such as the wrong dimensioning of urban drainage systems and the inaccurate estimation of pollution in the environment caused by c

  11. A surface hydrology model for regional vector borne disease models

    Science.gov (United States)

    Tompkins, Adrian; Asare, Ernest; Bomblies, Arne; Amekudzi, Leonard

    2016-04-01

    Small, sun-lit temporary pools that form during the rainy season are important breeding sites for many key mosquito vectors responsible for the transmission of malaria and other diseases. The representation of this surface hydrology in mathematical disease models is challenging, due to their small-scale, dependence on the terrain and the difficulty of setting soil parameters. Here we introduce a model that represents the temporal evolution of the aggregate statistics of breeding sites in a single pond fractional coverage parameter. The model is based on a simple, geometrical assumption concerning the terrain, and accounts for the processes of surface runoff, pond overflow, infiltration and evaporation. Soil moisture, soil properties and large-scale terrain slope are accounted for using a calibration parameter that sets the equivalent catchment fraction. The model is calibrated and then evaluated using in situ pond measurements in Ghana and ultra-high (10m) resolution explicit simulations for a village in Niger. Despite the model's simplicity, it is shown to reproduce the variability and mean of the pond aggregate water coverage well for both locations and validation techniques. Example malaria simulations for Uganda will be shown using this new scheme with a generic calibration setting, evaluated using district malaria case data. Possible methods for implementing regional calibration will be briefly discussed.

  12. Integrated hydrological modelling of the North China Plain

    DEFF Research Database (Denmark)

    Shu, Yunqiao; Villholth, Karen G.; Jensen, Karsten Høgh

    2012-01-01

    The integrated hydrological model MIKE SHE was applied to a part of the North China Plain to examine the dynamics of the hydrological system and to assess water management options to restore depleted groundwater resources. The model simulates the spatio-temporal distribution of recharge...... to and the associated dynamics of the alluvial aquifers based on climatic conditions, land use, soil characteristics, irrigation and coupled unsaturated-saturated zone processes. The model was auto-calibrated for the period 1996–2002 against daily observations of groundwater head from wells distributed across the 7230...... km2 region and actual evapotranspiration measured at an agricultural station located within the model area. The model simulations compared well with observations and acceptable values were obtained for both root mean square error and correlation coefficient. The calibrated model was subsequently used...

  13. Geographically Isolated Wetlands and Catchment Hydrology: A Modified Model Analyses

    Science.gov (United States)

    Evenson, G.; Golden, H. E.; Lane, C.; D'Amico, E.

    2014-12-01

    Geographically isolated wetlands (GIWs), typically defined as depressional wetlands surrounded by uplands, support an array of hydrological and ecological processes. However, key research questions concerning the hydrological connectivity of GIWs and their impacts on downgradient surface waters remain unanswered. This is particularly important for regulation and management of these systems. For example, in the past decade United States Supreme Court decisions suggest that GIWs can be afforded protection if significant connectivity exists between these waters and traditional navigable waters. Here we developed a simulation procedure to quantify the effects of various spatial distributions of GIWs across the landscape on the downgradient hydrograph using a refined version of the Soil and Water Assessment Tool (SWAT), a catchment-scale hydrological simulation model. We modified the SWAT FORTRAN source code and employed an alternative hydrologic response unit (HRU) definition to facilitate an improved representation of GIW hydrologic processes and connectivity relationships to other surface waters, and to quantify their downgradient hydrological effects. We applied the modified SWAT model to an ~ 202 km2 catchment in the Coastal Plain of North Carolina, USA, exhibiting a substantial population of mapped GIWs. Results from our series of GIW distribution scenarios suggest that: (1) Our representation of GIWs within SWAT conforms to field-based characterizations of regional GIWs in most respects; (2) GIWs exhibit substantial seasonally-dependent effects upon downgradient base flow; (3) GIWs mitigate peak flows, particularly following high rainfall events; and (4) The presence of GIWs on the landscape impacts the catchment water balance (e.g., by increasing groundwater outflows). Our outcomes support the hypothesis that GIWs have an important catchment-scale effect on downgradient streamflow.

  14. Hydrological modelling in a "big data" era: a proof of concept of hydrological models as web services

    Science.gov (United States)

    Buytaert, Wouter; Vitolo, Claudia

    2013-04-01

    Dealing with the massive increase in global data availability of all sorts is increasingly being known as "big data" science. Indeed, largely leveraged by the internet, a new resource of data sets emerges that are so large and heterogeneous that they become awkward to work with. New algorithms, methods and models are needed to filter such data to find trends, test hypotheses, make predictions and quantify uncertainties. As a considerable share of the data relate to environmental processes (e.g., satellite images, distributed sensor networks), this evolution provides exciting challenges for environmental sciences, and hydrology in particular. Web-enabled models are a promising approach to process large and distributed data sets, and to provide tailored products for a variety of end-users. It will also allow hydrological models to be used as building blocks in larger earth system simulation systems. However, in order to do so we need to reconsider the ways that hydrological models are built, results are made available, and uncertainties are quantified. We present the results of an experimental proof of concept of a hydrological modelling web-service to process heterogeneous hydrological data sets. The hydrological model itself consists of a set of conceptual model routines implemented with on a common platform. This framework is linked to global and local data sets through web standards provided by the Open Geospatial Consortium, as well as to a web interface that enables an end-user to request stream flow simulations from a self-defined location. In essence, the proof-of-concept can be seen as an implementation of the "Models of Everywhere" concept introduced by Beven in 2007. Although the setup is operational and effectively simulates stream flow, we identify several bottlenecks for optimal hydrological simulation in a web-context. The major challenges we identify are related to (1) model selection; (2) uncertainty quantification, and (3) user interaction and

  15. Spatial transferability of landscape-based hydrological models

    Science.gov (United States)

    Gao, Hongkai; Hrachowitz, Markus; Fenicia, Fabrizio; Gharari, Shervan; Sriwongsitanon, Nutchanart; Savenije, Hubert

    2015-04-01

    Landscapes, mainly distinguished by land surface topography and vegetation cover, are crucial in defining runoff generation mechanisms, interception capacity and transpiration processes. Landscapes information provides modelers with a way to take into account catchment heterogeneity, while simultaneously keeping model complexity low. A landscape-based hydrological modelling framework (FLEX-Topo), with parallel model structures, was developed and tested in various catchments with diverse climate, topography and land cover conditions. Landscape classification is the basic and most crucial procedure to create a tailor-made model for a certain catchment, as it explicitly relates hydrologic similarity to landscape similarity, which is the base of this type of models. Therefore, the study catchment is classified into different landscapes units that fulfil similar hydrological function, based on classification criteria such as the height above the nearest drainage, slope, aspect and land cover. At present, to suggested model includes four distinguishable landscapes: hillslopes, terraces/plateaus, riparian areas, and glacierized areas. Different parallel model structures are then associated with the different landscape units to describe their different dominant runoff generation mechanisms. These hydrological units are parallel and only connected by groundwater reservoir. The transferability of this landscape-based model can then be compared with the transferability of a lumped model. In this study, FLEX-Topo was developed and tested in three study sites: two cold-arid catchments in China (the upper Heihe River and the Urumqi Glacier No1 catchment), and one tropical catchment in Thailand (the upper Ping River). Stringent model tests indicate that FLEX-Topo, allowing for more process heterogeneity than lumped model formulations, exhibits higher capabilities to be spatially transferred. Furthermore, the simulated water balances, including internal fluxes, hydrograph

  16. eWaterCycle: A global operational hydrological forecasting model

    Science.gov (United States)

    van de Giesen, Nick; Bierkens, Marc; Donchyts, Gennadii; Drost, Niels; Hut, Rolf; Sutanudjaja, Edwin

    2015-04-01

    Development of an operational hyper-resolution hydrological global model is a central goal of the eWaterCycle project (www.ewatercycle.org). This operational model includes ensemble forecasts (14 days) to predict water related stress around the globe. Assimilation of near-real time satellite data is part of the intended product that will be launched at EGU 2015. The challenges come from several directions. First, there are challenges that are mainly computer science oriented but have direct practical hydrological implications. For example, we aim to make use as much as possible of existing standards and open-source software. For example, different parts of our system are coupled through the Basic Model Interface (BMI) developed in the framework of the Community Surface Dynamics Modeling System (CSDMS). The PCR-GLOBWB model, built by Utrecht University, is the basic hydrological model that is the engine of the eWaterCycle project. Re-engineering of parts of the software was needed for it to run efficiently in a High Performance Computing (HPC) environment, and to be able to interface using BMI, and run on multiple compute nodes in parallel. The final aim is to have a spatial resolution of 1km x 1km, which is currently 10 x 10km. This high resolution is computationally not too demanding but very memory intensive. The memory bottleneck becomes especially apparent for data assimilation, for which we use OpenDA. OpenDa allows for different data assimilation techniques without the need to build these from scratch. We have developed a BMI adaptor for OpenDA, allowing OpenDA to use any BMI compatible model. To circumvent memory shortages which would result from standard applications of the Ensemble Kalman Filter, we have developed a variant that does not need to keep all ensemble members in working memory. At EGU, we will present this variant and how it fits well in HPC environments. An important step in the eWaterCycle project was the coupling between the hydrological and

  17. Different methods for spatial interpolation of rainfall data for operational hydrology and hydrological modeling at watershed scale: a review

    Directory of Open Access Journals (Sweden)

    Ly, S.

    2013-01-01

    Full Text Available Watershed management and hydrological modeling require data related to the very important matter of precipitation, often measured using raingages or weather stations. Hydrological models often require a preliminary spatial interpolation as part of the modeling process. The success of spatial interpolation varies according to the type of model chosen, its mode of geographical management and the resolution used. The quality of a result is determined by the quality of the continuous spatial rainfall, which ensues from the interpolation method used. The objective of this article is to review the existing methods for interpolation of rainfall data that are usually required in hydrological modeling. We review the basis for the application of certain common methods and geostatistical approaches used in interpolation of rainfall. Previous studies have highlighted the need for new research to investigate ways of improving the quality of rainfall data and ultimately, the quality of hydrological modeling.

  18. A priori parameter estimates for global hydrological modeling using geographically based information: Application of the CREST hydrologic model

    Science.gov (United States)

    Gao, Z.; Zhang, K.; Xue, X.; Huang, J.; Hong, Y.

    2016-12-01

    Floods are among the most common natural disasters with worldwide impacts that cause significant humanitarian and economic negative consequences. The increasing availability of satellite-based precipitation estimates and geospatial datasets with global coverage and improved temporal resolutions has enhanced our capability of forecasting floods and monitoring water resources across the world. This study presents an approach combing physically based and empirical methods for a-priori parameter estimates and a parameter dataset for the Coupled Routing and Excess Storage (CREST) hydrological model at the global scale. This approach takes advantage of geographic information such as topography, land cover, and soil properties to derive the distributed parameter values across the world. The main objective of this study is to evaluate the utility of a-priori parameter estimates to improve the performance of the CREST distributed hydrologic model and enable its prediction at poorly gauged or ungauged catchments. Using the CREST hydrologic model, several typical river basins in different continents were selected to serve as test areas. The results show that the simulated daily stream flows using the parameters derived from geographically based information outperform the results using the lumped parameters. Overall, this early study highlights that a priori parameter estimates for hydrologic model warrants improved model predictive capability in ungauged basins at regional to global scales.

  19. Integrated climate and hydrology modelling - Coupling of the HIRHAM regional climate model and the MIKE SHE hydrological model

    Energy Technology Data Exchange (ETDEWEB)

    Dahl Larsen, M.A. [Technical Univ. of Denmark. DTU Management Engineering, DTU Risoe Campus, Roskilde (Denmark)

    2013-10-15

    To ensure optimal management and sustainable strategies for water resources, infrastructures, food production and ecosystems there is a need for an improved understanding of feedback and interaction mechanisms between the atmosphere and the land surface. This is especially true in light of expected global warming and increased frequency of extreme events. The skill in developing projections of both the present and future climate depends essentially on the ability to numerically simulate the processes of atmospheric circulation, hydrology, energy and ecology. Previous modelling efforts of climate and hydrology have used each model component in an offline mode where the models are run in sequential steps and one model serves as a boundary condition or data input source to the other. Within recent years a new field of research has emerged where efforts have been made to dynamically couple existing climate and hydrology models to more directly include the interaction between the atmosphere and the land surface. The present PhD study is motivated by an ambition of developing and applying a modelling tool capable of including the interaction and feedback mechanisms between the atmosphere and the land surface. The modelling tool consists of a fully dynamic two-way coupling of the HIRHAM regional climate model and the MIKE SHE hydrological model. The expected gain is twofold. Firstly, HIRHAM utilizes the land surface component of the combined MIKE SHE/SWET hydrology and land surface model (LSM), which is superior to the LSM in HIRHAM. A wider range of processes are included at the land surface, subsurface flow is distributed in three dimensions and the temporal and spatial resolution is higher. Secondly, the feedback mechanisms of e.g. soil moisture and precipitation between the two models are included. The preparation of the HIRHAM and MIKE SHE models for the coupled study revealed several findings. The performance of HIRHAM was highly affected by the domain size, domain

  20. Altitudes of the top of model layers in the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset defines the model grid and altitudes of the top of the 10 model layers and base of the model simulated in the transient hydrologic model of the...

  1. The One-Water Hydrologic Flow Model - The next generation in fully integrated hydrologic simulation software

    Science.gov (United States)

    Boyce, S. E.; Hanson, R. T.

    2015-12-01

    The One-Water Hydrologic Flow Model (MF-OWHM) is a MODFLOW-based integrated hydrologic flow model that is the most complete version, to date, of the MODFLOW family of hydrologic simulators needed for the analysis of a broad range of conjunctive-use issues. MF-OWHM fully links the movement and use of groundwater, surface water, and imported water for consumption by agriculture and natural vegetation on the landscape, and for potable and other uses within a supply-and-demand framework. MF-OWHM is based on the Farm Process for MODFLOW-2005 combined with Local Grid Refinement, Streamflow Routing, Surface-water Routing Process, Seawater Intrusion, Riparian Evapotranspiration, and the Newton-Raphson solver. MF-OWHM also includes linkages for deformation-, flow-, and head-dependent flows; additional observation and parameter options for higher-order calibrations; and redesigned code for facilitation of self-updating models and faster simulation run times. The next version of MF-OWHM, currently under development, will include a new surface-water operations module that simulates dynamic reservoir operations, the conduit flow process for karst aquifers and leaky pipe networks, a new subsidence and aquifer compaction package, and additional features and enhancements to enable more integration and cross communication between traditional MODFLOW packages. By retaining and tracking the water within the hydrosphere, MF-OWHM accounts for "all of the water everywhere and all of the time." This philosophy provides more confidence in the water accounting by the scientific community and provides the public a foundation needed to address wider classes of problems such as evaluation of conjunctive-use alternatives and sustainability analysis, including potential adaptation and mitigation strategies, and best management practices. By Scott E. Boyce and Randall T. Hanson

  2. Long Memory Models to Generate Synthetic Hydrological Series

    Directory of Open Access Journals (Sweden)

    Guilherme Armando de Almeida Pereira

    2014-01-01

    Full Text Available In Brazil, much of the energy production comes from hydroelectric plants whose planning is not trivial due to the strong dependence on rainfall regimes. This planning is accomplished through optimization models that use inputs such as synthetic hydrologic series generated from the statistical model PAR(p (periodic autoregressive. Recently, Brazil began the search for alternative models able to capture the effects that the traditional model PAR(p does not incorporate, such as long memory effects. Long memory in a time series can be defined as a significant dependence between lags separated by a long period of time. Thus, this research develops a study of the effects of long dependence in the series of streamflow natural energy in the South subsystem, in order to estimate a long memory model capable of generating synthetic hydrologic series.

  3. Hydrology in a Mediterranean mountain environment, the Vallcebre Research basins (North Eastern Spain). IV. Testing hydrological and erosion models

    Energy Technology Data Exchange (ETDEWEB)

    Gallart, F.; Latron, J.; Llorens, P.; Martinez-Carreras, N.

    2009-07-01

    Three modelling exercises were carried out in the Vallcebre research basins in order to both improve the understanding of the hydrological processes and test the adequate of some models in such Mediterranean mountain conditions. These exercises consisted of i) the analysis of the hydrological role of the agricultural terraces using the TOPMODEL topographic index, ii) the parametrisation of TOPMODEL using internal basin information, and iii) a test of the erosion model KINEROS2 for simulating badlands erosion. (Author) 13 refs.

  4. Use of remotely sensed precipitation and leaf area index in a distributed hydrological model

    DEFF Research Database (Denmark)

    Andersen, Jens; Dybkjær, Gorm Ibsen; Jensen, Karsten Høgh

    2002-01-01

    distributed hydrological modelling, remote sensing, precipitation, leaf area index, NOAA AVHRR, cold cloud duration......distributed hydrological modelling, remote sensing, precipitation, leaf area index, NOAA AVHRR, cold cloud duration...

  5. Perspectives in using a remotely sensed dryness index in distributed hydrological models at river basin scale

    DEFF Research Database (Denmark)

    Andersen, J.; Sandholt, Inge; Jensen, Karsten Høgh;

    2002-01-01

    Remote Sensing, hydrological modelling, dryness index, surface temperature, vegetation index, Africa, Senegal, soil moisture......Remote Sensing, hydrological modelling, dryness index, surface temperature, vegetation index, Africa, Senegal, soil moisture...

  6. Flash flood modeling with the MARINE hydrological distributed model

    Directory of Open Access Journals (Sweden)

    V. Estupina-Borrell

    2006-11-01

    Full Text Available Flash floods are characterized by their violence and the rapidity of their occurrence. Because these events are rare and unpredictable, but also fast and intense, their anticipation with sufficient lead time for warning and broadcasting is a primary subject of research. Because of the heterogeneities of the rain and of the behavior of the surface, spatially distributed hydrological models can lead to a better understanding of the processes and so on they can contribute to a better forecasting of flash flood. Our main goal here is to develop an operational and robust methodology for flash flood forecasting. This methodology should provide relevant data (information about flood evolution on short time scales, and should be applicable even in locations where direct observations are sparse (e.g. absence of historical and modern rainfalls and streamflows in small mountainous watersheds. The flash flood forecast is obtained by the physically based, space-time distributed hydrological model "MARINE'' (Model of Anticipation of Runoff and INondations for Extreme events. This model is presented and tested in this paper for a real flash flood event. The model consists in two steps, or two components: the first component is a "basin'' flood module which generates flood runoff in the upstream part of the watershed, and the second component is the "stream network'' module, which propagates the flood in the main river and its subsidiaries. The basin flash flood generation model is a rainfall-runoff model that can integrate remotely sensed data. Surface hydraulics equations are solved with enough simplifying hypotheses to allow real time exploitation. The minimum data required by the model are: (i the Digital Elevation Model, used to calculate slopes that generate runoff, it can be issued from satellite imagery (SPOT or from French Geographical Institute (IGN; (ii the rainfall data from meteorological radar, observed or

  7. Distributed lag models for hydrological data.

    Science.gov (United States)

    Rushworth, Alastair M; Bowman, Adrian W; Brewer, Mark J; Langan, Simon J

    2013-06-01

    The distributed lag model (DLM), used most prominently in air pollution studies, finds application wherever the effect of a covariate is delayed and distributed through time. We specify modified formulations of DLMs to provide computationally attractive, flexible varying-coefficient models that are applicable in any setting in which lagged covariates are regressed on a time-dependent response. We investigate the application of such models to rainfall and river flow and in particular their role in understanding the impact of hidden variables at work in river systems. We apply two models to data from a Scottish mountain river, and we fit to some simulated data to check the efficacy of our model approach. During heavy rainfall conditions, changes in the influence of rainfall on flow arise through a complex interaction between antecedent ground wetness and a time-delay in rainfall. The models identify subtle changes in responsiveness to rainfall, particularly in the location of peak influence in the lag structure.

  8. On the Usefulness of Hydrologic Landscapes for Hydrologic Modeling and Water Management

    Science.gov (United States)

    Hydrologic Landscapes (HLs) are units that can be used in aggregate to describe the watershed-scale hydrologic response of an area through use of physical and climatic properties. The HL assessment unit is a useful classification tool to relate and transfer hydrologically meaning...

  9. On the Usefulness of Hydrologic Landscapes on Hydrologic Model calibration and Selection

    Science.gov (United States)

    Hydrologic Landscapes (HLs) are units that can be used in aggregate to describe the watershed-scale hydrologic response of an area through use of physical and climatic properties. The HL assessment unit is a useful classification tool to relate and transfer hydrologically meaning...

  10. The application of remote sensing to the development and formulation of hydrologic planning models

    Science.gov (United States)

    Fowler, T. R.; Castruccio, P. A.; Loats, H. L., Jr.

    1977-01-01

    The development of a remote sensing model and its efficiency in determining parameters of hydrologic models are reviewed. Procedures for extracting hydrologic data from LANDSAT imagery, and the visual analysis of composite imagery are presented. A hydrologic planning model is developed and applied to determine seasonal variations in watershed conditions. The transfer of this technology to a user community and contract arrangements are discussed.

  11. Evaluation of drought propagation in an ensemble mean of large-scale hydrological models

    NARCIS (Netherlands)

    Loon, van A.F.; Huijgevoort, van M.H.J.; Lanen, van H.A.J.

    2012-01-01

    Hydrological drought is increasingly studied using large-scale models. It is, however, not sure whether large-scale models reproduce the development of hydrological drought correctly. The pressing question is how well do large-scale models simulate the propagation from meteorological to hydrological

  12. Committee of machine learning predictors of hydrological models uncertainty

    Science.gov (United States)

    Kayastha, Nagendra; Solomatine, Dimitri

    2014-05-01

    In prediction of uncertainty based on machine learning methods, the results of various sampling schemes namely, Monte Carlo sampling (MCS), generalized likelihood uncertainty estimation (GLUE), Markov chain Monte Carlo (MCMC), shuffled complex evolution metropolis algorithm (SCEMUA), differential evolution adaptive metropolis (DREAM), particle swarm optimization (PSO) and adaptive cluster covering (ACCO)[1] used to build a predictive models. These models predict the uncertainty (quantiles of pdf) of a deterministic output from hydrological model [2]. Inputs to these models are the specially identified representative variables (past events precipitation and flows). The trained machine learning models are then employed to predict the model output uncertainty which is specific for the new input data. For each sampling scheme three machine learning methods namely, artificial neural networks, model tree, locally weighted regression are applied to predict output uncertainties. The problem here is that different sampling algorithms result in different data sets used to train different machine learning models which leads to several models (21 predictive uncertainty models). There is no clear evidence which model is the best since there is no basis for comparison. A solution could be to form a committee of all models and to sue a dynamic averaging scheme to generate the final output [3]. This approach is applied to estimate uncertainty of streamflows simulation from a conceptual hydrological model HBV in the Nzoia catchment in Kenya. [1] N. Kayastha, D. L. Shrestha and D. P. Solomatine. Experiments with several methods of parameter uncertainty estimation in hydrological modeling. Proc. 9th Intern. Conf. on Hydroinformatics, Tianjin, China, September 2010. [2] D. L. Shrestha, N. Kayastha, and D. P. Solomatine, and R. Price. Encapsulation of parameteric uncertainty statistics by various predictive machine learning models: MLUE method, Journal of Hydroinformatic, in press

  13. Utilization of remote sensing observations in hydrologic models

    Science.gov (United States)

    Ragan, R. M.

    1977-01-01

    Most of the remote sensing related work in hydrologic modeling has centered on modifying existing models to take advantage of the capabilities of new sensor techniques. There has been enough success with this approach to insure that remote sensing is a powerful tool in modeling the watershed processes. Unfortunately, many of the models in use were designed without recognizing the growth of remote sensing technology. Thus, their parameters were selected to be map or field crew definable. It is believed that the real benefits will come through the evolution of new models having new parameters that are developed specifically to take advantage of our capabilities in remote sensing. The ability to define hydrologically active areas could have a significant impact. The ability to define soil moisture and the evolution of new techniques to estimate evoportransportation could significantly modify our approach to hydrologic modeling. Still, without a major educational effort to develop an understanding of the techniques used to extract parameter estimates from remote sensing data, the potential offered by this new technology will not be achieved.

  14. Anticipating the Role of SWOT in Hydrologic and Hydrodynamic Modeling

    Science.gov (United States)

    Pavelsky, T.; Biancamaria, S.; Andreadis, K.; Durand, M. T.; Schumann, G.

    2015-12-01

    The Surface Water and Ocean Topography (SWOT) satellite mission is a joint project of NASA and CNES, the French space agency. It aims to provide the first simultaneous, space-based measurements of inundation extent and water surface elevation in rivers, lakes, and wetlands around the world. Although the orbit repeat time is approximately 21 days, many areas of the earth will be viewed multiple times during this window. SWOT will observe rivers as narrow as 50-100 m and lakes as small as 0.01-0.06 km2, with height accuracies of ~10 cm for water bodies 1 km2 in area. Because SWOT will measure temporal variations in the height, width, and slope of rivers, several algorithms have been developed to estimate river discharge solely from SWOT measurements. Additionally, measurements of lake height and area will allow estimation of variability in lake water storage. These new hydrologic measurements will provide important sources of information both hydrologic and hydrodynamic models at regional to global scales. SWOT-derived estimates of water storage change and discharge will help to constrain simulation of the water budget in hydrologic models. Measurements of water surface elevation will provide similar constraints on hydrodynamic models of river flow. SWOT data will be useful for model calibration and validation, but perhaps the most exciting applications involve assimilation of SWOT data into models to enhance model robustness and provide denser temporal sampling than available from SWOT observations alone.

  15. An event-based hydrologic simulation model for bioretention systems.

    Science.gov (United States)

    Roy-Poirier, A; Filion, Y; Champagne, P

    2015-01-01

    Bioretention systems are designed to treat stormwater and provide attenuated drainage between storms. Bioretention has shown great potential at reducing the volume and improving the quality of stormwater. This study introduces the bioretention hydrologic model (BHM), a one-dimensional model that simulates the hydrologic response of a bioretention system over the duration of a storm event. BHM is based on the RECARGA model, but has been adapted for improved accuracy and integration of pollutant transport models. BHM contains four completely-mixed layers and accounts for evapotranspiration, overflow, exfiltration to native soils and underdrain discharge. Model results were evaluated against field data collected over 10 storm events. Simulated flows were particularly sensitive to antecedent water content and drainage parameters of bioretention soils, which were calibrated through an optimisation algorithm. Temporal disparity was observed between simulated and measured flows, which was attributed to preferential flow paths formed within the soil matrix of the field system. Modelling results suggest that soil water storage is the most important short-term hydrologic process in bioretention, with exfiltration having the potential to be significant in native soils with sufficient permeability.

  16. Developing a hydrological model in the absence of field data

    Science.gov (United States)

    Sproles, E. A.; Orrego Nelson, C.; Kerr, T.; Lopez Aspe, D.

    2014-12-01

    We present two runoff models that use remotely-sensed snow cover products from the Moderate Resolution Imaging Spectrometer (MODIS) as the first order hydrologic input. These simplistic models are the first step in developing an operational model for the Elqui River watershed located in northern Central Chile (30°S). In this semi-arid region, snow and glacier melt are the dominant hydrologic inputs where annual precipitation is limited to three or four winter events. Unfortunately winter access to the Andean Cordillera where snow accumulates is limited. While a monitoring network to measure snow where it accumulates in the upper elevations is under development, management decisions regarding water resources cannot wait. The two models we present differ in structure. The first applies a Monte Carlo approach to determine relationships between lagged changes in monthly snow cover frequency and monthly discharge. The second is a modified degree-day melt model, utilizing the MODIS snow cover product to determine where and when snow melt occurs. These models are not watershed specific and are applicable in other regions where snow dominates hydrologic inputs, but measurements are minimal.

  17. Macro-scale turbulence modelling for flows in porous media; Modelisation a l'echelle macroscopique d'un ecoulement turbulent au sein d'un milieu poreux

    Energy Technology Data Exchange (ETDEWEB)

    Pinson, F

    2006-03-15

    - This work deals with the macroscopic modeling of turbulence in porous media. It concerns heat exchangers, nuclear reactors as well as urban flows, etc. The objective of this study is to describe in an homogenized way, by the mean of a spatial average operator, turbulent flows in a solid matrix. In addition to this first operator, the use of a statistical average operator permits to handle the pseudo-aleatory character of turbulence. The successive application of both operators allows us to derive the balance equations of the kind of flows under study. Two major issues are then highlighted, the modeling of dispersion induced by the solid matrix and the turbulence modeling at a macroscopic scale (Reynolds tensor and turbulent dispersion). To this aim, we lean on the local modeling of turbulence and more precisely on the k - {epsilon} RANS models. The methodology of dispersion study, derived thanks to the volume averaging theory, is extended to turbulent flows. Its application includes the simulation, at a microscopic scale, of turbulent flows within a representative elementary volume of the porous media. Applied to channel flows, this analysis shows that even within the turbulent regime, dispersion remains one of the dominating phenomena within the macro-scale modeling framework. A two-scale analysis of the flow allows us to understand the dominating role of the drag force in the kinetic energy transfers between scales. Transfers between the mean part and the turbulent part of the flow are formally derived. This description significantly improves our understanding of the issue of macroscopic modeling of turbulence and leads us to define the sub-filter production and the wake dissipation. A f - <{epsilon}>f - <{epsilon}{sub w}>f model is derived. It is based on three balance equations for the turbulent kinetic energy, the viscous dissipation and the wake dissipation. Furthermore, a dynamical predictor for the friction coefficient is proposed. This model is then

  18. Flash flood warning based on fully dynamic hydrology modelling

    Science.gov (United States)

    Pejanovic, Goran; Petkovic, Slavko; Cvetkovic, Bojan; Nickovic, Slobodan

    2016-04-01

    Numerical hydrologic modeling has achieved limited success in the past due to, inter alia, lack of adequate input data. Over the last decade, data availability has improved substantially. For modelling purposes, high-resolution data on topography, river routing, and land cover and soil features have meanwhile become available, as well as the observations such as radar precipitation information. In our study, we have implemented the HYPROM model (Hydrology Prognostic Model) to predict a flash flood event at a smaller-scale basin in Southern Serbia. HYPROM is based on the full set of governing equations for surface hydrological dynamics, in which momentum components, along with the equation of mass continuity, are used as full prognostic equations. HYPROM also includes a river routing module serving as a collector for the extra surface water. Such approach permits appropriate representation of different hydrology scales ranging from flash floods to flows of large and slow river basins. The use of full governing equations, if not appropriately parameterized, may lead to numerical instability systems when the surface water in a model is vanishing. To resolve these modelling problems, an unconditionally stable numerical scheme and a method for height redistribution avoiding shortwave height noise have been developed in HYPROM, which achieve numerical convergence of u, v and h when surface water disappears. We have applied HYPROM, driven by radar-estimated precipitation, to predict flash flooding occurred over smaller and medium-size river basins. Two torrential rainfall cases have been simulated to check the accuracy of the model: the exceptional flooding of May 2014 in Western Serbia, and the convective flash flood of January 2015 in Southern Serbia. The second episode has been successfully predicted by HYPROM in terms of timing and intensity six hours before the event occurred. Such flash flood warning system is in preparation to be operationally implemented in the

  19. Modelling hydrological responses of Nerbioi River Basin to Climate Change

    Science.gov (United States)

    Mendizabal, Maddalen; Moncho, Roberto; Chust, Guillem; Torp, Peter

    2010-05-01

    Future climate change will affect aquatic systems on various pathways. Regarding the hydrological cycle, which is a very important pathway, changes in hydrometeorological variables (air temperature, precipitation, evapotranspiration) in first order impact discharges. The fourth report assessment of the Intergovernmental Panel for Climate Change indicates there is evidence that the recent warming of the climate system would result in more frequent extreme precipitation events, increased winter flood likelihoods, increased and widespread melting of snow and ice, longer and more widespread droughts, and rising sea level. Available research and climate model outputs indicate a range of hydrological impacts with likely to very likely probabilities (67 to 99%). For example, it is likely that up to 20% of the world population will live in areas where river flood potential could increase by the 2080s. In Spain, within the Atlantic basin, the hydrological variability will increase in the future due to the intensification of the positive phase of the North Atlantic Oscillation (NAO) index. This might cause flood frequency decreases, but its magnitude does not decrease. The generation of flood, its duration and magnitude are closely linked to changes in winter precipitation. The climatic conditions and relief of the Iberian Peninsula favour the generation of floods. In Spain, floods had historically strong socio-economic impacts, with more than 1525 victims in the past five decades. This upward trend of hydrological variability is expected to remain in the coming decades (medium uncertainty) when the intensification of the positive phase of the NAO index (MMA, 2006) is considered. In order to adapt or minimize climate change impacts in water resources, it is necessary to use climate projections as well as hydrological modelling tools. The main objective of this paper is to evaluate and assess the hydrological response to climate changes in flow conditions in Nerbioi river

  20. A conceptual glacio-hydrological model for high mountainous catchments

    Directory of Open Access Journals (Sweden)

    B. Schaefli

    2005-01-01

    Full Text Available In high mountainous catchments, the spatial precipitation and therefore the overall water balance is generally difficult to estimate. The present paper describes the structure and calibration of a semi-lumped conceptual glacio-hydrological model for the joint simulation of daily discharge and annual glacier mass balance that represents a better integrator of the water balance. The model has been developed for climate change impact studies and has therefore a parsimonious structure; it requires three input times series – precipitation, temperature and potential evapotranspiration – and has 7 parameters to calibrate. A multi-signal approach considering daily discharge and – if available – annual glacier mass balance has been developed for the calibration of these parameters. The model has been calibrated for three different catchments in the Swiss Alps having glaciation rates between 37% and 52%. It simulates well the observed daily discharge, the hydrological regime and some basic glaciological features, such as the annual mass balance.

  1. Hydrologic Evaluation of Landfill Performance (HELP) Model

    Science.gov (United States)

    The program models rainfall, runoff, infiltration, and other water pathways to estimate how much water builds up above each landfill liner. It can incorporate data on vegetation, soil types, geosynthetic materials, initial moisture conditions, slopes, etc.

  2. Modeled hydrologic metrics show links between hydrology and the functional composition of stream assemblages.

    Science.gov (United States)

    Patrick, Christopher J; Yuan, Lester L

    2017-07-01

    Flow alteration is widespread in streams, but current understanding of the effects of differences in flow characteristics on stream biological communities is incomplete. We tested hypotheses about the effect of variation in hydrology on stream communities by using generalized additive models to relate watershed information to the values of different flow metrics at gauged sites. Flow models accounted for 54-80% of the spatial variation in flow metric values among gauged sites. We then used these models to predict flow metrics in 842 ungauged stream sites in the mid-Atlantic United States that were sampled for fish, macroinvertebrates, and environmental covariates. Fish and macroinvertebrate assemblages were characterized in terms of a suite of metrics that quantified aspects of community composition, diversity, and functional traits that were expected to be associated with differences in flow characteristics. We related modeled flow metrics to biological metrics in a series of stressor-response models. Our analyses identified both drying and base flow instability as explaining 30-50% of the observed variability in fish and invertebrate community composition. Variations in community composition were related to variations in the prevalence of dispersal traits in invertebrates and trophic guilds in fish. The results demonstrate that we can use statistical models to predict hydrologic conditions at bioassessment sites, which, in turn, we can use to estimate relationships between flow conditions and biological characteristics. This analysis provides an approach to quantify the effects of spatial variation in flow metrics using readily available biomonitoring data. © 2017 by the Ecological Society of America.

  3. On the spatio-temporal analysis of hydrological droughts from global hydrological models

    Directory of Open Access Journals (Sweden)

    G. A. Corzo Perez

    2011-09-01

    Full Text Available The recent concerns for world-wide extreme events related to climate change have motivated the development of large scale models that simulate the global water cycle. In this context, analysis of hydrological extremes is important and requires the adaptation of identification methods used for river basin models. This paper presents two methodologies that extend the tools to analyze spatio-temporal drought development and characteristics using large scale gridded time series of hydrometeorological data. The methodologies are classified as non-contiguous and contiguous drought area analyses (i.e. NCDA and CDA. The NCDA presents time series of percentages of areas in drought at the global scale and for pre-defined regions of known hydroclimatology. The CDA is introduced as a complementary method that generates information on the spatial coherence of drought events at the global scale. Spatial drought events are found through CDA by clustering patterns (contiguous areas. In this study the global hydrological model WaterGAP was used to illustrate the methodology development. Global gridded time series of subsurface runoff (resolution 0.5° simulated with the WaterGAP model from land points were used. The NCDA and CDA were developed to identify drought events in runoff. The percentages of area in drought calculated with both methods show complementary information on the spatial and temporal events for the last decades of the 20th century. The NCDA provides relevant information on the average number of droughts, duration and severity (deficit volume for pre-defined regions (globe, 2 selected hydroclimatic regions. Additionally, the CDA provides information on the number of spatially linked areas in drought, maximum spatial event and their geographic location on the globe. Some results capture the overall spatio-temporal drought extremes over the last decades of the 20th century. Events like the El Niño Southern Oscillation (ENSO in South America and

  4. User requirements for hydrological models with remote sensing input

    Energy Technology Data Exchange (ETDEWEB)

    Kolberg, Sjur

    1997-10-01

    Monitoring the seasonal snow cover is important for several purposes. This report describes user requirements for hydrological models utilizing remotely sensed snow data. The information is mainly provided by operational users through a questionnaire. The report is primarily intended as a basis for other work packages within the Snow Tools project which aim at developing new remote sensing products for use in hydrological models. The HBV model is the only model mentioned by users in the questionnaire. It is widely used in Northern Scandinavia and Finland, in the fields of hydroelectric power production, flood forecasting and general monitoring of water resources. The current implementation of HBV is not based on remotely sensed data. Even the presently used HBV implementation may benefit from remotely sensed data. However, several improvements can be made to hydrological models to include remotely sensed snow data. Among these the most important are a distributed version, a more physical approach to the snow depletion curve, and a way to combine data from several sources. 1 ref.

  5. eWaterCycle: A high resolution global hydrological model

    Science.gov (United States)

    van de Giesen, Nick; Bierkens, Marc; Drost, Niels; Hut, Rolf; Sutanudjaja, Edwin

    2014-05-01

    In 2013, the eWaterCycle project was started, which has the ambitious goal to run a high resolution global hydrological model. Starting point was the PCR-GLOBWB built by Utrecht University. The software behind this model will partially be re-engineered in order to enable to run it in a High Performance Computing (HPC) environment. The aim is to have a spatial resolution of 1km x 1km. The idea is also to run the model in real-time and forecasting mode, using data assimilation. An on-demand hydraulic model will be available for detailed flow and flood forecasting in support of navigation and disaster management. The project faces a set of scientific challenges. First, to enable the model to run in a HPC environment, model runs were analyzed to examine on which parts of the program most CPU time was spent. These parts were re-coded in Open MPI to allow for parallel processing. Different parallelization strategies are thinkable. In our case, it was decided to use watershed logic as a first step to distribute the analysis. There is rather limited recent experience with HPC in hydrology and there is much to be learned and adjusted, both on the hydrological modeling side and the computer science side. For example, an interesting early observation was that hydrological models are, due to their localized parameterization, much more memory intensive than models of sister-disciplines such as meteorology and oceanography. Because it would be deadly to have to swap information between CPU and hard drive, memory management becomes crucial. A standard Ensemble Kalman Filter (enKF) would, for example, have excessive memory demands. To circumvent these problems, an alternative to the enKF was developed that produces equivalent results. This presentation shows the most recent results from the model, including a 5km x 5km simulation and a proof of concept for the new data assimilation approach. Finally, some early ideas about financial sustainability of an operational global

  6. A priori discretization error metrics for distributed hydrologic modeling applications

    Science.gov (United States)

    Liu, Hongli; Tolson, Bryan A.; Craig, James R.; Shafii, Mahyar

    2016-12-01

    Watershed spatial discretization is an important step in developing a distributed hydrologic model. A key difficulty in the spatial discretization process is maintaining a balance between the aggregation-induced information loss and the increase in computational burden caused by the inclusion of additional computational units. Objective identification of an appropriate discretization scheme still remains a challenge, in part because of the lack of quantitative measures for assessing discretization quality, particularly prior to simulation. This study proposes a priori discretization error metrics to quantify the information loss of any candidate discretization scheme without having to run and calibrate a hydrologic model. These error metrics are applicable to multi-variable and multi-site discretization evaluation and provide directly interpretable information to the hydrologic modeler about discretization quality. The first metric, a subbasin error metric, quantifies the routing information loss from discretization, and the second, a hydrological response unit (HRU) error metric, improves upon existing a priori metrics by quantifying the information loss due to changes in land cover or soil type property aggregation. The metrics are straightforward to understand and easy to recode. Informed by the error metrics, a two-step discretization decision-making approach is proposed with the advantage of reducing extreme errors and meeting the user-specified discretization error targets. The metrics and decision-making approach are applied to the discretization of the Grand River watershed in Ontario, Canada. Results show that information loss increases as discretization gets coarser. Moreover, results help to explain the modeling difficulties associated with smaller upstream subbasins since the worst discretization errors and highest error variability appear in smaller upstream areas instead of larger downstream drainage areas. Hydrologic modeling experiments under

  7. Flexible modeling frameworks to replace small ensembles of hydrological models and move toward large ensembles?

    Science.gov (United States)

    Addor, Nans; Clark, Martyn P.; Mizukami, Naoki

    2017-04-01

    Climate change impacts on hydrological processes are typically assessed using small ensembles of hydrological models. That is, a handful of hydrological models are typically driven by a larger number of climate models. Such a setup has several limitations. Because the number of hydrological models is small, only a small proportion of the model space is sampled, likely leading to an underestimation of the uncertainties in the projections. Further, sampling is arbitrary: although hydrological models should be selected to provide a representative sample of existing models (in terms of complexity and governing hypotheses), they are instead usually selected based on legacy reasons. Furthermore, running several hydrological models currently constitutes a practical challenge because each model must be setup and calibrated individually. Finally, and probably most importantly, the differences between the projected impacts cannot be directly related to differences between hydrological models, because the models are different in almost every possible aspect. We are hence in a situation in which different hydrological models deliver different projections, but for reasons that are mostly unclear, and in which the uncertainty in the projections is probably underestimated. To overcome these limitations, we are experimenting with the flexible modeling framework FUSE (Framework for Understanding Model Errors). FUSE enables to construct conceptual models piece by piece (in a "pick and mix" approach), so it can be used to generate a large number of models that mimic existing models and/or models that differ from other models in single targeted respect (e.g. how baseflow is generated). FUSE hence allows for controlled modeling experiments, and for a more systematic and exhaustive sampling of the model space. Here we explore climate change impacts over the contiguous USA on a 12km grid using two groups of three models: the first group involves the commonly used models VIC, PRMS and HEC

  8. Modeling the effect of land use change on hydrology of a forested watershed in coastal South Carolina.

    Science.gov (United States)

    Zhaohua Dai; Devendra M. Amatya; Ge Sun; Changsheng Li; Carl C. Trettin; Harbin Li

    2009-01-01

    Since hydrology is one of main factors controlling wetland functions, hydrologic models are useful for evaluating the effects of land use change on we land ecosystems. We evaluated two process-based hydrologic models with...

  9. Comparison of different efficiency criteria for hydrological model assessment

    Directory of Open Access Journals (Sweden)

    P. Krause

    2005-01-01

    Full Text Available The evaluation of hydrologic model behaviour and performance is commonly made and reported through comparisons of simulated and observed variables. Frequently, comparisons are made between simulated and measured streamflow at the catchment outlet. In distributed hydrological modelling approaches, additional comparisons of simulated and observed measurements for multi-response validation may be integrated into the evaluation procedure to assess overall modelling performance. In both approaches, single and multi-response, efficiency criteria are commonly used by hydrologists to provide an objective assessment of the "closeness" of the simulated behaviour to the observed measurements. While there are a few efficiency criteria such as the Nash-Sutcliffe efficiency, coefficient of determination, and index of agreement that are frequently used in hydrologic modeling studies and reported in the literature, there are a large number of other efficiency criteria to choose from. The selection and use of specific efficiency criteria and the interpretation of the results can be a challenge for even the most experienced hydrologist since each criterion may place different emphasis on different types of simulated and observed behaviours. In this paper, the utility of several efficiency criteria is investigated in three examples using a simple observed streamflow hydrograph.

  10. Distributed Hydrologic Modeling Apps for Decision Support in the Cloud

    Science.gov (United States)

    Swain, N. R.; Latu, K.; Christiensen, S.; Jones, N.; Nelson, J.

    2013-12-01

    Advances in computation resources and greater availability of water resources data represent an untapped resource for addressing hydrologic uncertainties in water resources decision-making. The current practice of water authorities relies on empirical, lumped hydrologic models to estimate watershed response. These models are not capable of taking advantage of many of the spatial datasets that are now available. Physically-based, distributed hydrologic models are capable of using these data resources and providing better predictions through stochastic analysis. However, there exists a digital divide that discourages many science-minded decision makers from using distributed models. This divide can be spanned using a combination of existing web technologies. The purpose of this presentation is to present a cloud-based environment that will offer hydrologic modeling tools or 'apps' for decision support and the web technologies that have been selected to aid in its implementation. Compared to the more commonly used lumped-parameter models, distributed models, while being more intuitive, are still data intensive, computationally expensive, and difficult to modify for scenario exploration. However, web technologies such as web GIS, web services, and cloud computing have made the data more accessible, provided an inexpensive means of high-performance computing, and created an environment for developing user-friendly apps for distributed modeling. Since many water authorities are primarily interested in the scenario exploration exercises with hydrologic models, we are creating a toolkit that facilitates the development of a series of apps for manipulating existing distributed models. There are a number of hurdles that cloud-based hydrologic modeling developers face. One of these is how to work with the geospatial data inherent with this class of models in a web environment. Supporting geospatial data in a website is beyond the capabilities of standard web frameworks and it

  11. Local biogeomorphic feedbacks and macroscale drivers shape coastal wetland distributions

    Science.gov (United States)

    Braswell, A. E.; Heffernan, J. B.

    2016-12-01

    Recent models have demonstrated that lateral biogeomorphic processes are important for the persistence of coastal wetlands in the face of sea level rise and other anthropogenic pressures. Yet empirical studies of marsh ecomorphodynamics have largely focused on vertical accretion. Moreover, local vertical and lateral processes of marsh-building depend on external sediment supply and the wave energy environment, and thus are connected to macroscale characteristics such as estuarine morphology and watershed size. These broad scale drivers, combined with local biogeomorphic feedbacks within wetlands, determine wetland extent. Our goal is to understand the scales at which local biogeomorphic feedbacks and macroscale estuarine and watershed characteristics influence the distribution of coastal marshes. To that end, we examined the distribution of wetland extent and its potential watershed and estuarine drivers at multiple scales along the Atlantic and Gulf coasts, USA. Using existing GIS resources, we delineated extents of coastal wetlands, and generated proxies of sediment input, estuarine energy, and human alteration. We found that distributions of wetland extent were bi-modal at the finest scale of our analysis (approx. 1-100 km2), a finding that is consistent with theoretical models of local marsh feedbacks. At larger spatial scales, distributions of marsh extent were associated with both estuarine size and drainage ratio. These relationships indicate that sediment supply and erosion ultimately constrain the extent of marsh development and persistence, while local feedbacks operate at smaller scales. Our findings support and extend theory and observation at the scale of marsh platforms and lagoons, but also demonstrate the importance of macroscale watershed and estuarine characteristics for wetland establishment and persistence.

  12. Evaluating spatial patterns in hydrological modelling

    DEFF Research Database (Denmark)

    Koch, Julian

    of spatial information in a holistic assessment. Opposed, statistical measures typically only address a limited amount of spatial information. A web-based survey and a citizen science project are employed to quantify the collective perceptive skills of humans aiming at benchmarking spatial metrics...... of environmental science, such as meteorology, geostatistics or geography. In total, seven metrics are evaluated with respect to their capability to quantitatively compare spatial patterns. The human visual perception is often considered superior to computer based measures, because it integrates various dimensions...... with respect to their capability to mimic human evaluations. This PhD thesis aims at expanding the standard toolbox of spatial model evaluation with innovative metrics that adequately compare spatial patterns. Driven by the rise of more complex model structures and the increase of suitable remote sensing...

  13. Coupling meteorological and hydrological models for flood forecasting

    Directory of Open Access Journals (Sweden)

    Bartholmes

    2005-01-01

    Full Text Available This paper deals with the problem of analysing the coupling of meteorological meso-scale quantitative precipitation forecasts with distributed rainfall-runoff models to extend the forecasting horizon. Traditionally, semi-distributed rainfall-runoff models have been used for real time flood forecasting. More recently, increased computer capabilities allow the utilisation of distributed hydrological models with mesh sizes from tenths of metres to a few kilometres. On the other hand, meteorological models, providing the quantitative precipitation forecast, tend to produce average values on meshes ranging from slightly less than 10 to 200 kilometres. Therefore, to improve the quality of flood forecasts, the effects of coupling the meteorological and the hydrological models at different scales were analysed. A distributed hydrological model (TOPKAPI was developed and calibrated using a 1x1 km mesh for the case of the river Po closed at Ponte Spessa (catchment area c. 37000 km2. The model was then coupled with several other European meteorological models ranging from the Limited Area Models (provided by DMI and DWD with resolutions from 0.0625° * 0.0625°, to the ECMWF ensemble predictions with a resolution of 1.85° * 1.85°. Interesting results, describing the coupled model behaviour, are available for a meteorological extreme event in Northern Italy (Nov. 1994. The results demonstrate the poor reliability of the quantitative precipitation forecasts produced by meteorological models presently available; this is not resolved using the Ensemble Forecasting technique, when compared with results obtainable with measured rainfall.

  14. Assessment of flood peak simulations by Global Hydrological Models

    OpenAIRE

    Miller, James; Kjeldsen, Thomas; Prudhomme, Christel

    2011-01-01

    With significant changes to flood frequency anticipated as a result of climate change it becomes important to investigate how global hydrological models process climate forcing data. Flood frequency distribution describes the relationship between flood peak magnitude and its return period, indicating the average period of time between exceedance of a certain flood magnitude. The steepness of the distribution (or of the growth curve) is a measure of the variability of the flood peak series. An...

  15. Simultaneous Semi-Distributed Model Calibration Guided by Hydrologic Landscapes in the Pacific Northwest, USA

    Science.gov (United States)

    Modelling approaches to transfer hydrologically-relevant information from locations with streamflow measurements to locations without such measurements continues to be an active field of research for hydrologists. The Pacific Northwest Hydrologic Landscapes (PNW HL) provide a sol...

  16. Development of a landscape unit delineation framework for ecoy-hydrologic models

    Science.gov (United States)

    A spatially distributed representation of basin hydrology and transport processes in eco-hydrological models facilitates the identification of critical source areas and the placement of management and conservation measures. Especially floodplains are critical landscape features that differ from nei...

  17. Development of a "Hydrologic Equivalent Wetland" Concept for Modeling Cumulative Effects of Wetlands on Watershed Hydrology

    Science.gov (United States)

    Wang, X.; Liu, T.; Li, R.; Yang, X.; Duan, L.; Luo, Y.

    2012-12-01

    Wetlands are one of the most important watershed microtopographic features that affect, in combination rather than individually, hydrologic processes (e.g., routing) and the fate and transport of constituents (e.g., sediment and nutrients). Efforts to conserve existing wetlands and/or to restore lost wetlands require that watershed-level effects of wetlands on water quantity and water quality be quantified. Because monitoring approaches are usually cost or logistics prohibitive at watershed scale, distributed watershed models, such as the Soil and Water Assessment Tool (SWAT), can be a best resort if wetlands can be appropriately represented in the models. However, the exact method that should be used to incorporate wetlands into hydrologic models is the subject of much disagreement in the literature. In addition, there is a serious lack of information about how to model wetland conservation-restoration effects using such kind of integrated modeling approach. The objectives of this study were to: 1) develop a "hydrologic equivalent wetland" (HEW) concept; and 2) demonstrate how to use the HEW concept in SWAT to assess effects of wetland restoration within the Broughton's Creek watershed located in southwestern Manitoba of Canada, and of wetland conservation within the upper portion of the Otter Tail River watershed located in northwestern Minnesota of the United States. The HEWs were defined in terms of six calibrated parameters: the fraction of the subbasin area that drains into wetlands (WET_FR), the volume of water stored in the wetlands when filled to their normal water level (WET_NVOL), the volume of water stored in the wetlands when filled to their maximum water level (WET_MXVOL), the longest tributary channel length in the subbasin (CH_L1), Manning's n value for the tributary channels (CH_N1), and Manning's n value for the main channel (CH_N2). The results indicated that the HEW concept allows the nonlinear functional relations between watershed processes

  18. Data assimilation in integrated hydrological modelling

    DEFF Research Database (Denmark)

    Rasmussen, Jørn

    are assimilated significant improvements are obtained in both stream flow and groundwater modeling. However, the successfulness of both the state updating and the parameter estimation is conditioned on a sufficiently large ensemble size, as spurious correlations often had a negative impact on the performance...... of the data assimilation algorithm. To reduce the impact of spurious correlation, an adaptive localization method is applied, which significantly improved the performance of the assimilation while reducing the computational requirements. Finally, as observation bias is common in groundwater head observations...

  19. Advancing reservoir operation description in physically based hydrological models

    Science.gov (United States)

    Anghileri, Daniela; Giudici, Federico; Castelletti, Andrea; Burlando, Paolo

    2016-04-01

    Last decades have seen significant advances in our capacity of characterizing and reproducing hydrological processes within physically based models. Yet, when the human component is considered (e.g. reservoirs, water distribution systems), the associated decisions are generally modeled with very simplistic rules, which might underperform in reproducing the actual operators' behaviour on a daily or sub-daily basis. For example, reservoir operations are usually described by a target-level rule curve, which represents the level that the reservoir should track during normal operating conditions. The associated release decision is determined by the current state of the reservoir relative to the rule curve. This modeling approach can reasonably reproduce the seasonal water volume shift due to reservoir operation. Still, it cannot capture more complex decision making processes in response, e.g., to the fluctuations of energy prices and demands, the temporal unavailability of power plants or varying amount of snow accumulated in the basin. In this work, we link a physically explicit hydrological model with detailed hydropower behavioural models describing the decision making process by the dam operator. In particular, we consider two categories of behavioural models: explicit or rule-based behavioural models, where reservoir operating rules are empirically inferred from observational data, and implicit or optimization based behavioural models, where, following a normative economic approach, the decision maker is represented as a rational agent maximising a utility function. We compare these two alternate modelling approaches on the real-world water system of Lake Como catchment in the Italian Alps. The water system is characterized by the presence of 18 artificial hydropower reservoirs generating almost 13% of the Italian hydropower production. Results show to which extent the hydrological regime in the catchment is affected by different behavioural models and reservoir

  20. Calibration and validation of DRAINMOD to model bioretention hydrology

    Science.gov (United States)

    Brown, R. A.; Skaggs, R. W.; Hunt, W. F.

    2013-04-01

    SummaryPrevious field studies have shown that the hydrologic performance of bioretention cells varies greatly because of factors such as underlying soil type, physiographic region, drainage configuration, surface storage volume, drainage area to bioretention surface area ratio, and media depth. To more accurately describe bioretention hydrologic response, a long-term hydrologic model that generates a water balance is needed. Some current bioretention models lack the ability to perform long-term simulations and others have never been calibrated from field monitored bioretention cells with underdrains. All peer-reviewed models lack the ability to simultaneously perform both of the following functions: (1) model an internal water storage (IWS) zone drainage configuration and (2) account for soil-water content using the soil-water characteristic curve. DRAINMOD, a widely-accepted agricultural drainage model, was used to simulate the hydrologic response of runoff entering a bioretention cell. The concepts of water movement in bioretention cells are very similar to those of agricultural fields with drainage pipes, so many bioretention design specifications corresponded directly to DRAINMOD inputs. Detailed hydrologic measurements were collected from two bioretention field sites in Nashville and Rocky Mount, North Carolina, to calibrate and test the model. Each field site had two sets of bioretention cells with varying media depths, media types, drainage configurations, underlying soil types, and surface storage volumes. After 12 months, one of these characteristics was altered - surface storage volume at Nashville and IWS zone depth at Rocky Mount. At Nashville, during the second year (post-repair period), the Nash-Sutcliffe coefficients for drainage and exfiltration/evapotranspiration (ET) both exceeded 0.8 during the calibration and validation periods. During the first year (pre-repair period), the Nash-Sutcliffe coefficients for drainage, overflow, and exfiltration

  1. A priori discretization quality metrics for distributed hydrologic modeling applications

    Science.gov (United States)

    Liu, Hongli; Tolson, Bryan; Craig, James; Shafii, Mahyar; Basu, Nandita

    2016-04-01

    In distributed hydrologic modelling, a watershed is treated as a set of small homogeneous units that address the spatial heterogeneity of the watershed being simulated. The ability of models to reproduce observed spatial patterns firstly depends on the spatial discretization, which is the process of defining homogeneous units in the form of grid cells, subwatersheds, or hydrologic response units etc. It is common for hydrologic modelling studies to simply adopt a nominal or default discretization strategy without formally assessing alternative discretization levels. This approach lacks formal justifications and is thus problematic. More formalized discretization strategies are either a priori or a posteriori with respect to building and running a hydrologic simulation model. A posteriori approaches tend to be ad-hoc and compare model calibration and/or validation performance under various watershed discretizations. The construction and calibration of multiple versions of a distributed model can become a seriously limiting computational burden. Current a priori approaches are more formalized and compare overall heterogeneity statistics of dominant variables between candidate discretization schemes and input data or reference zones. While a priori approaches are efficient and do not require running a hydrologic model, they do not fully investigate the internal spatial pattern changes of variables of interest. Furthermore, the existing a priori approaches focus on landscape and soil data and do not assess impacts of discretization on stream channel definition even though its significance has been noted by numerous studies. The primary goals of this study are to (1) introduce new a priori discretization quality metrics considering the spatial pattern changes of model input data; (2) introduce a two-step discretization decision-making approach to compress extreme errors and meet user-specified discretization expectations through non-uniform discretization threshold

  2. Calibration process of highly parameterized semi-distributed hydrological model

    Science.gov (United States)

    Vidmar, Andrej; Brilly, Mitja

    2017-04-01

    Hydrological phenomena take place in the hydrological system, which is governed by nature, and are essentially stochastic. These phenomena are unique, non-recurring, and changeable across space and time. Since any river basin with its own natural characteristics and any hydrological event therein, are unique, this is a complex process that is not researched enough. Calibration is a procedure of determining the parameters of a model that are not known well enough. Input and output variables and mathematical model expressions are known, while only some parameters are unknown, which are determined by calibrating the model. The software used for hydrological modelling nowadays is equipped with sophisticated algorithms for calibration purposes without possibility to manage process by modeler. The results are not the best. We develop procedure for expert driven process of calibration. We use HBV-light-CLI hydrological model which has command line interface and coupling it with PEST. PEST is parameter estimation tool which is used widely in ground water modeling and can be used also on surface waters. Process of calibration managed by expert directly, and proportionally to the expert knowledge, affects the outcome of the inversion procedure and achieves better results than if the procedure had been left to the selected optimization algorithm. First step is to properly define spatial characteristic and structural design of semi-distributed model including all morphological and hydrological phenomena, like karstic area, alluvial area and forest area. This step includes and requires geological, meteorological, hydraulic and hydrological knowledge of modeler. Second step is to set initial parameter values at their preferred values based on expert knowledge. In this step we also define all parameter and observation groups. Peak data are essential in process of calibration if we are mainly interested in flood events. Each Sub Catchment in the model has own observations group

  3. Assessing climate change impact by integrated hydrological modelling

    Science.gov (United States)

    Lajer Hojberg, Anker; Jørgen Henriksen, Hans; Olsen, Martin; der Keur Peter, van; Seaby, Lauren Paige; Troldborg, Lars; Sonnenborg, Torben; Refsgaard, Jens Christian

    2013-04-01

    Future climate may have a profound effect on the freshwater cycle, which must be taken into consideration by water management for future planning. Developments in the future climate are nevertheless uncertain, thus adding to the challenge of managing an uncertain system. To support the water managers at various levels in Denmark, the national water resources model (DK-model) (Højberg et al., 2012; Stisen et al., 2012) was used to propagate future climate to hydrological response under considerations of the main sources of uncertainty. The DK-model is a physically based and fully distributed model constructed on the basis of the MIKE SHE/MIKE11 model system describing groundwater and surface water systems and the interaction between the domains. The model has been constructed for the entire 43.000 km2 land area of Denmark only excluding minor islands. Future climate from General Circulation Models (GCM) was downscaled by Regional Climate Models (RCM) by a distribution-based scaling method (Seaby et al., 2012). The same dataset was used to train all combinations of GCM-RCMs and they were found to represent the mean and variance at the seasonal basis equally well. Changes in hydrological response were computed by comparing the short term development from the period 1990 - 2010 to 2021 - 2050, which is the time span relevant for water management. To account for uncertainty in future climate predictions, hydrological response from the DK-model using nine combinations of GCMs and RCMs was analysed for two catchments representing the various hydrogeological conditions in Denmark. Three GCM-RCM combinations displaying high, mean and low future impacts were selected as representative climate models for which climate impact studies were carried out for the entire country. Parameter uncertainty was addressed by sensitivity analysis and was generally found to be of less importance compared to the uncertainty spanned by the GCM-RCM combinations. Analysis of the simulations

  4. Intercomparison of hydrologic processes in global climate models

    Science.gov (United States)

    Lau, W. K.-M.; Sud, Y. C.; Kim, J.-H.

    1995-01-01

    In this report, we address the intercomparison of precipitation (P), evaporation (E), and surface hydrologic forcing (P-E) for 23 Atmospheric Model Intercomparison Project (AMIP) general circulation models (GCM's) including relevant observations, over a variety of spatial and temporal scales. The intercomparison includes global and hemispheric means, latitudinal profiles, selected area means for the tropics and extratropics, ocean and land, respectively. In addition, we have computed anomaly pattern correlations among models and observations for different seasons, harmonic analysis for annual and semiannual cycles, and rain-rate frequency distribution. We also compare the joint influence of temperature and precipitation on local climate using the Koeppen climate classification scheme.

  5. Hydrological Modelling of Small Scale Processes in a Wetland Habitat

    DEFF Research Database (Denmark)

    Johansen, Ole; Jensen, Jacob Birk; Pedersen, Morten Lauge

    2009-01-01

    Numerical modelling of the hydrology in a Danish rich fen area has been conducted. By collecting various data in the field the model has been successfully calibrated and the flow paths as well as the groundwater discharge distribution have been simulated in details. The results of this work have...... shown that distributed numerical models can be applied to local scale problems and that natural springs, ditches, the geological conditions as well as the local topographic variations have a significant influence on the flow paths in the examined rich fen area....

  6. Validating a spatially distributed hydrological model with soil morphology data

    Directory of Open Access Journals (Sweden)

    T. Doppler

    2013-10-01

    Full Text Available Spatially distributed hydrological models are popular tools in hydrology and they are claimed to be useful to support management decisions. Despite the high spatial resolution of the computed variables, calibration and validation is often carried out only on discharge time-series at specific locations due to the lack of spatially distributed reference data. Because of this restriction, the predictive power of these models, with regard to predicted spatial patterns, can usually not be judged. An example of spatial predictions in hydrology is the prediction of saturated areas in agricultural catchments. These areas can be important source areas for the transport of agrochemicals to the stream. We set up a spatially distributed model to predict saturated areas in a 1.2 km2 catchment in Switzerland with moderate topography. Around 40% of the catchment area are artificially drained. We measured weather data, discharge and groundwater levels in 11 piezometers for 1.5 yr. For broadening the spatially distributed data sets that can be used for model calibration and validation, we translated soil morphological data available from soil maps into an estimate of the duration of soil saturation in the soil horizons. We used redox-morphology signs for these estimates. This resulted in a data set with high spatial coverage on which the model predictions were validated. In general, these saturation estimates corresponded well to the measured groundwater levels. We worked with a model that would be applicable for management decisions because of its fast calculation speed and rather low data requirements. We simultaneously calibrated the model to the groundwater levels in the piezometers and discharge. The model was able to reproduce the general hydrological behavior of the catchment in terms of discharge and absolute groundwater levels. However, the accuracy of the groundwater level predictions was not high enough to be used for the prediction of saturated areas

  7. A confined-unconfined aquifer model for subglacial hydrology

    Science.gov (United States)

    Beyer, Sebastian; Kleiner, Thomas; Humbert, Angelika

    2017-04-01

    Modeling the evolution of subglacial channels underneath ice sheets is an urgent need for ice sheet modellers, as channels affect sliding velocities and hence ice discharge. Owing to very limited observations of the subglacial hydraulic system, the development of physical models is quite restricted. Subglacial hydrology models are currently taking two different approaches: either modeling the development of a network of individual channels or modeling an equivalent porous layer where the channels are not resolved individually but modeled as a diffusive process, adjusted to reproduce the characteristic of an efficient system. Here, we use the latter approach, improving it by using a confined-unconfined aquifer model (CUAS), that allows the system to run dry in absence of sufficient water input. This ensures physical values for the water pressure. Channels are represented by adjusting the permeability and storage of the system according to projected locations of channels. The evolution of channel positions is governed by a reduced complexity model that computes channel growths according to simple rules (weighted random walks descending the hydraulic potential). As a proof of concept we present the results of the evolution of the hydrological system over time for a simple artificial glacier geometry.

  8. Integrated hydrological SVAT model for climate change studies in Denmark

    Science.gov (United States)

    Mollerup, M.; Refsgaard, J.; Sonnenborg, T. O.

    2010-12-01

    In a major Danish funded research project (www.hyacints.dk) a coupling is being established between the HIRHAM regional climate model code from Danish Meteorological Institute and the MIKE SHE distributed hydrological model code from DHI. The linkage between those two codes is a soil vegetation atmosphere transfer scheme, which is a module of MIKE SHE. The coupled model will be established for the entire country of Denmark (43,000 km2 land area) where a MIKE SHE based hydrological model already exists (Henriksen et al., 2003, 2008). The present paper presents the MIKE SHE SVAT module and the methodology used for parameterising and calibrating the MIKE SHE SVAT module for use throughout the country. As SVAT models previously typically have been tested for research field sites with comprehensive data on energy fluxes, soil and vegetation data, the major challenge lies in parameterisation of the model when only ordinary data exist. For this purpose annual variations of vegetation characteristics (Leaf Area Index (LAI), Crop height, Root depth and the surface albedo) for different combinations of soil profiles and vegetation types have been simulated by use of the soil plant atmosphere model Daisy (Hansen et al., 1990; Abrahamsen and Hansen, 2000) has been applied. The MIKE SHE SVAT using Daisy generated surface/soil properties model has been calibrated against existing data on groundwater heads and river discharges. Simulation results in form of evapotranspiration and percolation are compared to the existing MIKE SHE model and to observations. To analyse the use of the SVAT model in climate change impact assessments data from the ENSEMBLES project (http://ensembles-eu.metoffice.com/) have been analysed to assess the impacts on reference evapotranspiration (calculated by the Makkink and the Penmann-Monteith equations) as well as on the individual elements in the Penmann-Monteith equation (radiation, wind speed, humidity and temperature). The differences on the

  9. Parallelization of a hydrological model using the message passing interface

    Science.gov (United States)

    Wu, Yiping; Li, Tiejian; Sun, Liqun; Chen, Ji

    2013-01-01

    With the increasing knowledge about the natural processes, hydrological models such as the Soil and Water Assessment Tool (SWAT) are becoming larger and more complex with increasing computation time. Additionally, other procedures such as model calibration, which may require thousands of model iterations, can increase running time and thus further reduce rapid modeling and analysis. Using the widely-applied SWAT as an example, this study demonstrates how to parallelize a serial hydrological model in a Windows® environment using a parallel programing technology—Message Passing Interface (MPI). With a case study, we derived the optimal values for the two parameters (the number of processes and the corresponding percentage of work to be distributed to the master process) of the parallel SWAT (P-SWAT) on an ordinary personal computer and a work station. Our study indicates that model execution time can be reduced by 42%–70% (or a speedup of 1.74–3.36) using multiple processes (two to five) with a proper task-distribution scheme (between the master and slave processes). Although the computation time cost becomes lower with an increasing number of processes (from two to five), this enhancement becomes less due to the accompanied increase in demand for message passing procedures between the master and all slave processes. Our case study demonstrates that the P-SWAT with a five-process run may reach the maximum speedup, and the performance can be quite stable (fairly independent of a project size). Overall, the P-SWAT can help reduce the computation time substantially for an individual model run, manual and automatic calibration procedures, and optimization of best management practices. In particular, the parallelization method we used and the scheme for deriving the optimal parameters in this study can be valuable and easily applied to other hydrological or environmental models.

  10. Calibration of hydrologic models using flow-duration curves

    Science.gov (United States)

    Westerberg, I.; Younger, P.; Guerrero, J.; Beven, K.; Seibert, J.; Halldin, S.; Xu, C.

    2010-12-01

    The usefulness of hydrological models depends on their skill to mimic real-world hydrology as attested by some efficiency criterion. The suitability of traditional criteria, such as the Nash-Sutcliffe efficiency, for model calibration has been much debated. Discharge data are plentiful for a few decades around the 1970’s but much less available in the last decades since the reported number of discharge stations in the world has gone down substantially from the peak in the late 1970’s. At the same time global precipitation and climate data such as TRMM and ERA-Interim, used to drive hydrological models, have become more readily available in the last 10-20 years. This mismatch of observation time periods makes traditional model calibration difficult or even impossible for basins where there are no overlapping periods of model input and evaluation data. A new calibration method is proposed here that addresses this mismatch and at the same time accounts for uncertainty in discharge data. An estimation of the discharge-data uncertainty is used as a basis to set limits of acceptability for observed flow-duration curves. These limits are then used for model calibration and evaluation within a Generalised Likelihood Uncertainty Estimation (GLUE) framework. Advantages of the new approach include less risk of bias because of epistemic (knowledge) type input-output errors (e.g. no simulated discharge for an observed flow peak because of no rain gauges in the only part of the catchment where it rained), a calibration that addresses the model performance for the whole flow regime (low, medium and high flows) simultaneously and a more realistic uncertainty estimation since discharge uncertainty is addressed. The new method is most suitable for water-balance model applications. Additional limits of acceptability for snow-routine parameters will be needed in basins with snow and frozen soils.

  11. Distributed hydrological models: comparison between TOPKAPI, a physically based model and TETIS, a conceptually based model

    Science.gov (United States)

    Ortiz, E.; Guna, V.

    2009-04-01

    The present work aims to carry out a comparison between two distributed hydrological models, the TOPKAPI (Ciarapica and Todini, 1998; Todini and Ciarapica, 2001) and TETIS (Vélez, J. J.; Vélez J. I. and Francés, F, 2002) models, obtaining the hydrological solution computed on the basis of the same storm events. The first model is physically based and the second one is conceptually based. The analysis was performed on the 21,4 km2 Goodwin Creek watershed, located in Panola County, Mississippi. This watershed extensively monitored by the Agricultural Research Service (ARS) National Sediment Laboratory (NSL) has been chosen because it offers a complete database compiling precipitation (16 rain gauges), runoff (6 discharge stations) and GIS data. Three storm events were chosen to evaluate the performance of the two models: the first one was chosen to calibrate the models, and the other two to validate them. Both models performed a satisfactory hydrological response both in calibration and validation events. While for the TOPKAPI model it wasn't a real calibration, due to its really good performance with parameters modal values derived of watershed characteristics, for the TETIS model it has been necessary to perform a previous automatic calibration. This calibration was carried out using the data provided by the observed hydrograph, in order to adjust the modeĺs 9 correction factors. Keywords: TETIS, TOPKAPI, distributed models, hydrological response, ungauged basins.

  12. Remote sensing based evapotranspiration and runoff modeling of agricultural, forest and urban flux sites in Denmark: From field to macro-scale

    DEFF Research Database (Denmark)

    Bøgh, E.; Poulsen, R.N.; Butts, M.

    2009-01-01

    and most sensitive to the spatial land surface representation. A good agreement was observed in the timing and size of peak flows in catchment dominated by agricultural, forest and urban land uses in periods when E has important control on the water balance and soil water percolation to groundwater...... E modeling, (3) high accuracy remote sensing based estimation of vegetation parameters is particularly important during sparsely vegetated conditions, and (4) the use of component stream flow data to evaluate the physical consistency of spatial-deterministic models appears to be feasible and should...

  13. Misrepresentation and amendment of soil moisture in conceptual hydrological modelling

    Science.gov (United States)

    Zhuo, Lu; Han, Dawei

    2016-04-01

    Although many conceptual models are very effective in simulating river runoff, their soil moisture schemes are generally not realistic in comparison with the reality (i.e., getting the right answers for the wrong reasons). This study reveals two significant misrepresentations in those models through a case study using the Xinanjiang model which is representative of many well-known conceptual hydrological models. The first is the setting of the upper limit of its soil moisture at the field capacity, due to the 'holding excess runoff' concept (i.e., runoff begins on repletion of its storage to the field capacity). The second is neglect of capillary rise of water movement. A new scheme is therefore proposed to overcome those two issues. The amended model is as effective as its original form in flow modelling, but represents more logically realistic soil water processes. The purpose of the study is to enable the hydrological model to get the right answers for the right reasons. Therefore, the new model structure has a better capability in potentially assimilating soil moisture observations to enhance its real-time flood forecasting accuracy. The new scheme is evaluated in the Pontiac catchment of the USA through a comparison with satellite observed soil moisture. The correlation between the XAJ and the observed soil moisture is enhanced significantly from 0.64 to 0.70. In addition, a new soil moisture term called SMDS (Soil Moisture Deficit to Saturation) is proposed to complement the conventional SMD (Soil Moisture Deficit).

  14. Evaluation of a hydrological model based on Bidirectional Reach (BReach)

    Science.gov (United States)

    Van Eerdenbrugh, Katrien; Van Hoey, Stijn; Verhoest, Niko E. C.

    2016-04-01

    Evaluation and discrimination of model structures is crucial to ensure an appropriate use of hydrological models. When evaluating model results by aggregating their quality in (a subset of) individual observations, overall results of this analysis sometimes conceal important detailed information about model structural deficiencies. Analyzing model results within their local (time) context can uncover this detailed information. In this research, a methodology called Bidirectional Reach (BReach) is proposed to evaluate and analyze results of a hydrological model by assessing the maximum left and right reach in each observation point that is used for model evaluation. These maximum reaches express the capability of the model to describe a subset of the evaluation data both in the direction of the previous (left) and of the following data (right). This capability is evaluated on two levels. First, on the level of individual observations, the combination of a parameter set and an observation is classified as non-acceptable if the deviation between the accompanying model result and the measurement exceeds observational uncertainty. Second, the behavior in a sequence of observations is evaluated by means of a tolerance degree. This tolerance degree expresses the condition for satisfactory model behavior in a data series and is defined by the percentage of observations within this series that can have non-acceptable model results. Based on both criteria, the maximum left and right reaches of a model in an observation represent the data points in the direction of the previous respectively the following observations beyond which none of the sampled parameter sets both are satisfactory and result in an acceptable deviation. After assessing these reaches for a variety of tolerance degrees, results can be plotted in a combined BReach plot that show temporal changes in the behavior of model results. The methodology is applied on a Probability Distributed Model (PDM) of the river

  15. A novel physical eco-hydrological model concept for preferential flow based on experimental applications.

    Science.gov (United States)

    Jackisch, Conrad; van Schaik, Loes; Graeff, Thomas; Zehe, Erwin

    2014-05-01

    Preferential flow through macropores often determines hydrological characteristics - especially regarding runoff generation and fast transport of solutes. Macropore settings may yet be very different in nature and dynamics, depending on their origin. While biogenic structures follow activity cycles (e.g. earth worms) and population conditions (e.g. roots), pedogenic and geogenic structures may depend on water stress (e.g. cracks) or large events (e.g. flushed voids between skeleton and soil pipes) or simply persist (e.g. bedrock interface). On the one hand, such dynamic site characteristics can be observed in seasonal changes in its reaction to precipitation. On the other hand, sprinkling experiments accompanied by tracers or time-lapse 3D Ground-Penetrating-Radar are suitable tools to determine infiltration patterns and macropore configuration. However, model representation of the macropore-matrix system is still problematic, because models either rely on effective parameters (assuming well-mixed state) or on explicit advection strongly simplifying or neglecting interaction with the diffusive flow domain. Motivated by the dynamic nature of macropores, we present a novel model approach for interacting diffusive and advective water, solutes and energy transport in structured soils. It solely relies on scale- and process-aware observables. A representative set of macropores (data from sprinkling experiments) determines the process model scale through 1D advective domains. These are connected to a 2D matrix domain which is defined by pedo-physical retention properties. Water is represented as particles. Diffusive flow is governed by a 2D random walk of these particles while advection may take place in the macropore domain. Macropore-matrix interaction is computed as dissipation of the advective momentum of a particle by its experienced drag from the matrix domain. Through a representation of matrix and macropores as connected diffusive and advective domains for water

  16. Synchronising data sources and filling gaps by global hydrological modelling

    Science.gov (United States)

    Pimentel, Rafael; Crochemore, Louise; Hasan, Abdulghani; Pineda, Luis; Isberg, Kristina; Arheimer, Berit

    2017-04-01

    The advances in remote sensing in the last decades combined with the creation of different open hydrological databases have generated a very large amount of useful information for global hydrological modelling. Working with this huge number of datasets to set up a global hydrological model can constitute challenges such as multiple data formats and big heterogeneity on spatial and temporal resolutions. Different initiatives have made effort to homogenize some of these data sources, i.e. GRDC (Global Runoff Data Center), HYDROSHEDS (SHuttle Elevation Derivatives at multiple Scales), GLWD (Global Lake and Wetland Database) for runoff, watershed delineation and water bodies respectively. However, not all the related issues are covered or homogenously solved at the global scale and new information is continuously available to complete the current ones. This work presents synchronising efforts to make use of different global data sources needed to set up the semi-distributed hydrological model HYPE (Hydrological Predictions for the Environment) at the global scale. These data sources included: topography for watershed delineation, gauging stations of river flow, and extention of lakes, flood plains and land cover classes. A new database with approximately 100 000 subbasins, with an average area of 1000 km2, was created. Subbasin delineation was done combining Global Width Database for Large River (GWD-LR), SRTM high-resolution elevation data and a number of forced points of interest (gauging station of river flow, lakes, reservoirs, urban areas, nuclear plants and areas with high risk of flooding). Regarding flow data, the locations of GRDC stations were checked or placed along the river network when necessary, and completed with available information from national water services in data-sparse regions. A screening of doublet stations and associated time series was necessary to efficiently combine the two types of data sources. A total number about 21 000 stations were

  17. Parameter estimation of hydrologic models using data assimilation

    Science.gov (United States)

    Kaheil, Y. H.

    2005-12-01

    The uncertainties associated with the modeling of hydrologic systems sometimes demand that data should be incorporated in an on-line fashion in order to understand the behavior of the system. This paper represents a Bayesian strategy to estimate parameters for hydrologic models in an iterative mode. The paper presents a modified technique called localized Bayesian recursive estimation (LoBaRE) that efficiently identifies the optimum parameter region, avoiding convergence to a single best parameter set. The LoBaRE methodology is tested for parameter estimation for two different types of models: a support vector machine (SVM) model for predicting soil moisture, and the Sacramento Soil Moisture Accounting (SAC-SMA) model for estimating streamflow. The SAC-SMA model has 13 parameters that must be determined. The SVM model has three parameters. Bayesian inference is used to estimate the best parameter set in an iterative fashion. This is done by narrowing the sampling space by imposing uncertainty bounds on the posterior best parameter set and/or updating the "parent" bounds based on their fitness. The new approach results in fast convergence towards the optimal parameter set using minimum training/calibration data and evaluation of fewer parameter sets. The efficacy of the localized methodology is also compared with the previously used Bayesian recursive estimation (BaRE) algorithm.

  18. Advances and visions in large-scale hydrological modelling: findings from the 11th workshop on large-scale hydrological modelling

    NARCIS (Netherlands)

    Döll, P.; Berkhoff, K.; Bormann, H.; Fohrer, N.; Gerten, D.; Hagemann, S.; Krol, Martinus S.

    2008-01-01

    Large-scale hydrological modelling has become increasingly wide-spread during the last decade. An annual workshop series on large-scale hydrological modelling has provided, since 1997, a forum to the German-speaking community for discussing recent developments and achievements in this research area.

  19. Global Hydrological Hazard Evaluation System (Global BTOP) Using Distributed Hydrological Model

    Science.gov (United States)

    Gusyev, M.; Magome, J.; Hasegawa, A.; Takeuchi, K.

    2015-12-01

    A global hydrological hazard evaluation system based on the BTOP models (Global BTOP) is introduced and quantifies flood and drought hazards with simulated river discharges globally for historical, near real-time monitoring and climate change impact studies. The BTOP model utilizes a modified topographic index concept and simulates rainfall-runoff processes including snowmelt, overland flow, soil moisture in the root and unsaturated zones, sub-surface flow, and river flow routing. The current global BTOP is constructed from global data on 10-min grid and is available to conduct river basin analysis on local, regional, and global scale. To reduce the impact of a coarse resolution, topographical features of global BTOP were obtained using river network upscaling algorithm that preserves fine resolution characteristics of 3-arcsec HydroSHEDS and 30-arcsec Hydro1K datasets. In addition, GLCC-IGBP land cover (USGS) and the DSMW(FAO) were used for the root zone depth and soil properties, respectively. The long-term seasonal potential evapotranspiration within BTOP model was estimated by the Shuttleworth-Wallace model using climate forcing data CRU TS3.1 and a GIMMS-NDVI(UMD/GLCF). The global BTOP was run with globally available precipitation such APHRODITE dataset and showed a good statistical performance compared to the global and local river discharge data in the major river basins. From these simulated daily river discharges at each grid, the flood peak discharges of selected return periods were obtained using the Gumbel distribution with L-moments and the hydrological drought hazard was quantified using standardized runoff index (SRI). For the dynamic (near real-time) applications, the global BTOP model is run with GSMaP-NRT global precipitation and simulated daily river discharges are utilized in a prototype near-real time discharge simulation system (GFAS-Streamflow), which is used to issue flood peak discharge alerts globally. The global BTOP system and GFAS

  20. Physical models for class-room teaching in hydrology

    Science.gov (United States)

    Rodhe, A.

    2012-03-01

    Hydrology teaching benefits from the fact that many important processes can be illustrated and explained with simple physical models. A set of mobile physical models has been developed and used during many years of lecturing at basic university level teaching in hydrology. One model, with which many phenomena can be demonstrated, consists of a 1.0 m long plexiglass container containing an about 0.25 m deep open sand aquifer through which water is circulated. The model can be used for showing the groundwater table and its influence on the water content in the unsaturated zone and for quantitative determination of hydraulic properties such as the storage coefficient and the saturated hydraulic conductivity. It is also well suited for discussions on the runoff process and the significance of recharge and discharge areas for groundwater. The flowpaths of water and contaminant dispersion can be illustrated in tracer experiments using flourescent or colour dye. This and a few other physical models, with suggested demonstrations and experiments, are described in this article. The finding from using models in class-room teaching is that it creates curiosity among the students, promotes discussions and most likely deepens the understanding of the basic processes.

  1. Review of Hydrologic Models for Evaluating Use of Remote Sensing Capabilities

    Science.gov (United States)

    Peck, E. L.; Mcquivey, R. S.; Keefer, T.; Johnson, E. R.; Erekson, J. L.

    1982-01-01

    Hydrologic models most commonly used by federal agencies for hydrologic forecasting are reviewed. Six catchment models and one snow accumulation and ablation model are reviewed. Information on the structure, parameters, states, and required inputs is presented in schematic diagrams and in tables. The primary and secondary roles of parameters and state variables with respect to their function in the models are identified. The information will be used to evaluate the usefulness of remote sensing capabilities in the operational use of hydrologic models.

  2. Impact of wetlands mapping on parameterization of hydrologic simulation models

    Science.gov (United States)

    Viger, R.

    2015-12-01

    Wetlands and other surface depressions can impact hydrologic response within the landscape in a number of ways, such as intercepting runoff and near-surface flows or changing the potential for evaporation and seepage into the soil. The role of these features is increasingly being integrated into hydrological simulation models, such as the USGS Precipitation-Runoff Modeling System (PRMS) and the Soil Water Assessment Tool (SWAT), and applied to landscapes where wetlands are dominating features. Because the extent of these features varies widely through time, many modeling applications rely on delineations of the maximum possible extent to define total capacity of a model's spatial response unit. This poster presents an evaluation of several wetland map delineations for the Pipestem River basin in the North Dakota Prairie-pothole region. The featured data sets include the US Fish and Wildlife Service National Wetlands Inventory (NWI), surface water bodies extracted from the US Geological Survey National Hydrography Dataset (NHD), and elevation depressions extracted from 1 meter LiDAR data for the area. In addition to characterizing differences in the quality of these datasets, the poster will assess the impact of these differences when parameters are derived from them for the spatial response units of the PRMS model.

  3. Remote sensing inputs to landscape models which predict future spatial land use patterns for hydrologic models

    Science.gov (United States)

    Miller, L. D.; Tom, C.; Nualchawee, K.

    1977-01-01

    A tropical forest area of Northern Thailand provided a test case of the application of the approach in more natural surroundings. Remote sensing imagery subjected to proper computer analysis has been shown to be a very useful means of collecting spatial data for the science of hydrology. Remote sensing products provide direct input to hydrologic models and practical data bases for planning large and small-scale hydrologic developments. Combining the available remote sensing imagery together with available map information in the landscape model provides a basis for substantial improvements in these applications.

  4. An Integrated Hydrologic Bayesian Multi-Model Combination Framework: Confronting Input, parameter and model structural uncertainty in Hydrologic Prediction

    Energy Technology Data Exchange (ETDEWEB)

    Ajami, N K; Duan, Q; Sorooshian, S

    2006-05-05

    This paper presents a new technique--Integrated Bayesian Uncertainty Estimator (IBUNE) to account for the major uncertainties of hydrologic rainfall-runoff predictions explicitly. The uncertainties from the input (forcing) data--mainly the precipitation observations and from the model parameters are reduced through a Monte Carlo Markov Chain (MCMC) scheme named Shuffled Complex Evolution Metropolis (SCEM) algorithm which has been extended to include a precipitation error model. Afterwards, the Bayesian Model Averaging (BMA) scheme is employed to further improve the prediction skill and uncertainty estimation using multiple model output. A series of case studies using three rainfall-runoff models to predict the streamflow in the Leaf River basin, Mississippi are used to examine the necessity and usefulness of this technique. The results suggests that ignoring either input forcings error or model structural uncertainty will lead to unrealistic model simulations and their associated uncertainty bounds which does not consistently capture and represent the real-world behavior of the watershed.

  5. Spatial interpolation schemes of daily precipitation for hydrologic modeling

    Science.gov (United States)

    Hwang, Y.; Clark, M.; Rajagopalan, B.; Leavesley, G.

    2012-01-01

    Distributed hydrologic models typically require spatial estimates of precipitation interpolated from sparsely located observational points to the specific grid points. We compare and contrast the performance of regression-based statistical methods for the spatial estimation of precipitation in two hydrologically different basins and confirmed that widely used regression-based estimation schemes fail to describe the realistic spatial variability of daily precipitation field. The methods assessed are: (1) inverse distance weighted average; (2) multiple linear regression (MLR); (3) climatological MLR; and (4) locally weighted polynomial regression (LWP). In order to improve the performance of the interpolations, the authors propose a two-step regression technique for effective daily precipitation estimation. In this simple two-step estimation process, precipitation occurrence is first generated via a logistic regression model before estimate the amount of precipitation separately on wet days. This process generated the precipitation occurrence, amount, and spatial correlation effectively. A distributed hydrologic model (PRMS) was used for the impact analysis in daily time step simulation. Multiple simulations suggested noticeable differences between the input alternatives generated by three different interpolation schemes. Differences are shown in overall simulation error against the observations, degree of explained variability, and seasonal volumes. Simulated streamflows also showed different characteristics in mean, maximum, minimum, and peak flows. Given the same parameter optimization technique, LWP input showed least streamflow error in Alapaha basin and CMLR input showed least error (still very close to LWP) in Animas basin. All of the two-step interpolation inputs resulted in lower streamflow error compared to the directly interpolated inputs. ?? 2011 Springer-Verlag.

  6. Simulated CONUS Flash Flood Climatologies from Distributed Hydrologic Models

    Science.gov (United States)

    Flamig, Z.; Gourley, J. J.; Vergara, H. J.; Kirstetter, P. E.; Hong, Y.

    2016-12-01

    This study will describe a CONUS flash flood climatology created over the period from 2002 through 2011. The MRMS reanalysis precipitation dataset was used as forcing into the Ensemble Framework For Flash Flood Forecasting (EF5). This high resolution 1-sq km 5-minute dataset is ideal for simulating flash floods with a distributed hydrologic model. EF5 features multiple water balance components including SAC-SMA, CREST, and a hydrophobic model all coupled with kinematic wave routing. The EF5/SAC-SMA and EF5/CREST water balance schemes were used for the creation of dual flash flood climatologies based on the differing water balance principles. For the period from 2002 through 2011 the daily maximum streamflow, unit streamflow, and time of peak streamflow was stored along with the minimum soil moisture. These variables are used to describe the states of the soils right before a flash flood event and the peak streamflow that was simulated during the flash flood event. The results will be shown, compared and contrasted. The resulting model simulations will be verified on basins less than 1,000-sq km with USGS gauges to ensure the distributed hydrologic models are reliable. The results will also be compared spatially to Storm Data flash flood event observations to judge the degree of agreement between the simulated climatologies and observations.

  7. Implications of complete watershed soil moisture measurements to hydrologic modeling

    Science.gov (United States)

    Engman, E. T.; Jackson, T. J.; Schmugge, T. J.

    1983-01-01

    A series of six microwave data collection flights for measuring soil moisture were made over a small 7.8 square kilometer watershed in southwestern Minnesota. These flights were made to provide 100 percent coverage of the basin at a 400 m resolution. In addition, three flight lines were flown at preselected areas to provide a sample of data at a higher resolution of 60 m. The low level flights provide considerably more information on soil moisture variability. The results are discussed in terms of reproducibility, spatial variability and temporal variability, and their implications for hydrologic modeling.

  8. Adaptable Web Modules to Stimulate Active Learning in Engineering Hydrology using Data and Model Simulations of Three Regional Hydrologic Systems

    Science.gov (United States)

    Habib, E. H.; Tarboton, D. G.; Lall, U.; Bodin, M.; Rahill-Marier, B.; Chimmula, S.; Meselhe, E. A.; Ali, A.; Williams, D.; Ma, Y.

    2013-12-01

    The hydrologic community has long recognized the need for broad reform in hydrologic education. A paradigm shift is critically sought in undergraduate hydrology and water resource education by adopting context-rich, student-centered, and active learning strategies. Hydrologists currently deal with intricate issues rooted in complex natural ecosystems containing a multitude of interconnected processes. Advances in the multi-disciplinary field include observational settings such as Critical Zone and Water, Sustainability and Climate Observatories, Hydrologic Information Systems, instrumentation and modeling methods. These research advances theory and practices call for similar efforts and improvements in hydrologic education. The typical, text-book based approach in hydrologic education has focused on specific applications and/or unit processes associated with the hydrologic cycle with idealizations, rather than the contextual relations in the physical processes and the spatial and temporal dynamics connecting climate and ecosystems. An appreciation of the natural variability of these processes will lead to graduates with the ability to develop independent learning skills and understanding. This appreciation cannot be gained in curricula where field components such as observational and experimental data are deficient. These types of data are also critical when using simulation models to create environments that support this type of learning. Additional sources of observations in conjunction with models and field data are key to students understanding of the challenges associated with using models to represent such complex systems. Recent advances in scientific visualization and web-based technologies provide new opportunities for the development of active learning techniques utilizing ongoing research. The overall goal of the current study is to develop visual, case-based, data and simulation driven learning experiences to instructors and students through a web

  9. Identification of hydrological model parameter variation using ensemble Kalman filter

    Science.gov (United States)

    Deng, Chao; Liu, Pan; Guo, Shenglian; Li, Zejun; Wang, Dingbao

    2016-12-01

    Hydrological model parameters play an important role in the ability of model prediction. In a stationary context, parameters of hydrological models are treated as constants; however, model parameters may vary with time under climate change and anthropogenic activities. The technique of ensemble Kalman filter (EnKF) is proposed to identify the temporal variation of parameters for a two-parameter monthly water balance model (TWBM) by assimilating the runoff observations. Through a synthetic experiment, the proposed method is evaluated with time-invariant (i.e., constant) parameters and different types of parameter variations, including trend, abrupt change and periodicity. Various levels of observation uncertainty are designed to examine the performance of the EnKF. The results show that the EnKF can successfully capture the temporal variations of the model parameters. The application to the Wudinghe basin shows that the water storage capacity (SC) of the TWBM model has an apparent increasing trend during the period from 1958 to 2000. The identified temporal variation of SC is explained by land use and land cover changes due to soil and water conservation measures. In contrast, the application to the Tongtianhe basin shows that the estimated SC has no significant variation during the simulation period of 1982-2013, corresponding to the relatively stationary catchment properties. The evapotranspiration parameter (C) has temporal variations while no obvious change patterns exist. The proposed method provides an effective tool for quantifying the temporal variations of the model parameters, thereby improving the accuracy and reliability of model simulations and forecasts.

  10. Dynamic Hydrological Modeling in Drylands with TRMM Based Rainfall

    Directory of Open Access Journals (Sweden)

    Elena Tarnavsky

    2013-12-01

    Full Text Available This paper introduces and evaluates DryMOD, a dynamic water balance model of the key hydrological process in drylands that is based on free, public-domain datasets. The rainfall model of DryMOD makes optimal use of spatially disaggregated Tropical Rainfall Measuring Mission (TRMM datasets to simulate hourly rainfall intensities at a spatial resolution of 1-km. Regional-scale applications of the model in seasonal catchments in Tunisia and Senegal characterize runoff and soil moisture distribution and dynamics in response to varying rainfall data inputs and soil properties. The results highlight the need for hourly-based rainfall simulation and for correcting TRMM 3B42 rainfall intensities for the fractional cover of rainfall (FCR. Without FCR correction and disaggregation to 1 km, TRMM 3B42 based rainfall intensities are too low to generate surface runoff and to induce substantial changes to soil moisture storage. The outcomes from the sensitivity analysis show that topsoil porosity is the most important soil property for simulation of runoff and soil moisture. Thus, we demonstrate the benefit of hydrological investigations at a scale, for which reliable information on soil profile characteristics exists and which is sufficiently fine to account for the heterogeneities of these. Where such information is available, application of DryMOD can assist in the spatial and temporal planning of water harvesting according to runoff-generating areas and the runoff ratio, as well as in the optimization of agricultural activities based on realistic representation of soil moisture conditions.

  11. Multiobjective Automatic Parameter Calibration of a Hydrological Model

    Directory of Open Access Journals (Sweden)

    Donghwi Jung

    2017-03-01

    Full Text Available This study proposes variable balancing approaches for the exploration (diversification and exploitation (intensification of the non-dominated sorting genetic algorithm-II (NSGA-II with simulated binary crossover (SBX and polynomial mutation (PM in the multiobjective automatic parameter calibration of a lumped hydrological model, the HYMOD model. Two objectives—minimizing the percent bias and minimizing three peak flow differences—are considered in the calibration of the six parameters of the model. The proposed balancing approaches, which migrate the focus between exploration and exploitation over generations by varying the crossover and mutation distribution indices of SBX and PM, respectively, are compared with traditional static balancing approaches (the two dices value is fixed during optimization in a benchmark hydrological calibration problem for the Leaf River (1950 km2 near Collins, Mississippi. Three performance metrics—solution quality, spacing, and convergence—are used to quantify and compare the quality of the Pareto solutions obtained by the two different balancing approaches. The variable balancing approaches that migrate the focus of exploration and exploitation differently for SBX and PM outperformed other methods.

  12. Integrating water resources management in eco-hydrological modelling.

    Science.gov (United States)

    Koch, H; Liersch, S; Hattermann, F F

    2013-01-01

    In this paper the integration of water resources management with regard to reservoir management in an eco-hydrological model is described. The model was designed to simulate different reservoir management options, such as optimized hydropower production, irrigation intake from the reservoir or optimized provisioning downstream. The integrated model can be used to investigate the impacts of climate variability/change on discharge or to study possible adaptation strategies in terms of reservoir management. The study area, the Upper Niger Basin located in the West African Sahel, is characterized by a monsoon-type climate. Rainfall and discharge regime are subject to strong seasonality. Measured data from a reservoir are used to show that the reservoir model and the integrated management options can be used to simulate the regulation of this reservoir. The inflow into the reservoir and the discharge downstream of the reservoir are quite distinctive, which points out the importance of the inclusion of water resources management.

  13. Improved Methodology for Parameter Inference in Nonlinear, Hydrologic Regression Models

    Science.gov (United States)

    Bates, Bryson C.

    1992-01-01

    A new method is developed for the construction of reliable marginal confidence intervals and joint confidence regions for the parameters of nonlinear, hydrologic regression models. A parameter power transformation is combined with measures of the asymptotic bias and asymptotic skewness of maximum likelihood estimators to determine the transformation constants which cause the bias or skewness to vanish. These optimized constants are used to construct confidence intervals and regions for the transformed model parameters using linear regression theory. The resulting confidence intervals and regions can be easily mapped into the original parameter space to give close approximations to likelihood method confidence intervals and regions for the model parameters. Unlike many other approaches to parameter transformation, the procedure does not use a grid search to find the optimal transformation constants. An example involving the fitting of the Michaelis-Menten model to velocity-discharge data from an Australian gauging station is used to illustrate the usefulness of the methodology.

  14. Does better rainfall interpolation improve hydrological model performance?

    Science.gov (United States)

    Bàrdossy, Andràs; Kilsby, Chris; Lewis, Elisabeth

    2017-04-01

    High spatial variability of precipitation is one of the main sources of uncertainty in rainfall/runoff modelling. Spatially distributed models require detailed space time information on precipitation as input. In the past decades a lot of effort was spent on improving precipitation interpolation using point observations. Different geostatistical methods like Ordinary Kriging, External Drift Kriging or Copula based interpolation can be used to find the best estimators for unsampled locations. The purpose of this work is to investigate to what extents more sophisticated precipitation estimation methods can improve model performance. For this purpose the Wye catchment in Wales was selected. The physically-based spatially-distributed hydrological model SHETRAN is used to describe the hydrological processes in the catchment. 31 raingauges with 1 hourly temporal resolution are available for a time period of 6 years. In order to avoid the effect of model uncertainty model parameters were not altered in this study. Instead 100 random subsets consisting of 14 stations each were selected. For each of the configurations precipitation was interpolated for each time step using nearest neighbor (NN), inverse distance (ID) and Ordinary Kriging (OK). The variogram was obtained using the temporal correlation of the time series measured at different locations. The interpolated data were used as input for the spatially distributed model. Performance was evaluated for daily mean discharges using the Nash-Sutcliffe coefficient, temporal correlations, flow volumes and flow duration curves. The results show that the simplest NN and the sophisticated OK performances are practically equally good, while ID performed worse. NN was often better for high flows. The reason for this is that NN does not reduce the variance, while OK and ID yield smooth precipitation fields. The study points out the importance of precipitation variability and suggests the use of conditional spatial simulation as

  15. Hydrological changes in the Amur river basin: two approaches for assignment of climate projections into hydrological model

    Science.gov (United States)

    Gelfan, Alexander; Kalugin, Andrei; Motovilov, Yury

    2017-04-01

    A regional hydrological model was setup to assess possible impact of climate change on the hydrological regime of the Amur drainage basin (the catchment area is 1 855 000 km2). The model is based on the ECOMAG hydrological modeling platform and describes spatially distributed processes of water cycle in this great basin with account for flow regulation by the Russian and Chinese reservoirs. Earlier, the regional hydrological model was intensively evaluated against 20-year streamflow data over the whole Amur basin and, being driven by 252-station meteorological observations as input data, demonstrated good performance. In this study, we firstly assessed the reliability of the model to reproduce the historical streamflow series when Global Climate Model (GCM) simulation data are used as input into the hydrological model. Data of nine GCMs involved in CMIP5 project was utilized and we found that ensemble mean of annual flow is close to the observed flow (error is about 14%) while data of separate GCMs may result in much larger errors. Reproduction of seasonal flow for the historical period turned out weaker; first of all because of large errors in simulated seasonal precipitation, so hydrological consequences of climate change were estimated just in terms of annual flow. We analyzed the hydrological projections from the climate change scenarios. The impacts were assessed in four 20-year periods: early- (2020-2039), mid- (2040-2059) and two end-century (2060-2079; 2080-2099) periods using an ensemble of nine GCMs and four Representative Concentration Pathways (RCP) scenarios. Mean annual runoff anomalies calculated as percentages of the future runoff (simulated under 36 GCM-RCP combinations of climate scenarios) to the historical runoff (simulated under the corresponding GCM outputs for the reference 1986-2005 period) were estimated. Hydrological model gave small negative runoff anomalies for almost all GCM-RCP combinations of climate scenarios and for all 20-year

  16. Hydrologic Modeling and Flood Frequency Analysis for Ordinary High Water Mark Delineation

    Science.gov (United States)

    2016-02-01

    ER D C/ CR RE L TR -1 6- 2 Wetland Regulatory Assistance Program (WRAP) Hydrologic Modeling and Flood Frequency Analysis for Ordinary...Program (WRAP) ERDC/CRREL TR-16-2 February 2016 Hydrologic Modeling and Flood Frequency Analysis for Ordinary High Water Mark Delineation John...Abstract This document explores hydrologic modeling and flood frequency analysis for ordinary high water mark (OHWM) delineation performed for Clean

  17. Real Time Land-Surface Hydrologic Modeling Over Continental US

    Science.gov (United States)

    Houser, Paul R.

    1998-01-01

    The land surface component of the hydrological cycle is fundamental to the overall functioning of the atmospheric and climate processes. Spatially and temporally variable rainfall and available energy, combined with land surface heterogeneity cause complex variations in all processes related to surface hydrology. The characterization of the spatial and temporal variability of water and energy cycles are critical to improve our understanding of land surface-atmosphere interaction and the impact of land surface processes on climate extremes. Because the accurate knowledge of these processes and their variability is important for climate predictions, most Numerical Weather Prediction (NWP) centers have incorporated land surface schemes in their models. However, errors in the NWP forcing accumulate in the surface and energy stores, leading to incorrect surface water and energy partitioning and related processes. This has motivated the NWP to impose ad hoc corrections to the land surface states to prevent this drift. A proposed methodology is to develop Land Data Assimilation schemes (LDAS), which are uncoupled models forced with observations, and not affected by NWP forcing biases. The proposed research is being implemented as a real time operation using an existing Surface Vegetation Atmosphere Transfer Scheme (SVATS) model at a 40 km degree resolution across the United States to evaluate these critical science questions. The model will be forced with real time output from numerical prediction models, satellite data, and radar precipitation measurements. Model parameters will be derived from the existing GIS vegetation and soil coverages. The model results will be aggregated to various scales to assess water and energy balances and these will be validated with various in-situ observations.

  18. Techniques to Access Databases and Integrate Data for Hydrologic Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Whelan, Gene; Tenney, Nathan D.; Pelton, Mitchell A.; Coleman, Andre M.; Ward, Duane L.; Droppo, James G.; Meyer, Philip D.; Dorow, Kevin E.; Taira, Randal Y.

    2009-06-17

    This document addresses techniques to access and integrate data for defining site-specific conditions and behaviors associated with ground-water and surface-water radionuclide transport applicable to U.S. Nuclear Regulatory Commission reviews. Environmental models typically require input data from multiple internal and external sources that may include, but are not limited to, stream and rainfall gage data, meteorological data, hydrogeological data, habitat data, and biological data. These data may be retrieved from a variety of organizations (e.g., federal, state, and regional) and source types (e.g., HTTP, FTP, and databases). Available data sources relevant to hydrologic analyses for reactor licensing are identified and reviewed. The data sources described can be useful to define model inputs and parameters, including site features (e.g., watershed boundaries, stream locations, reservoirs, site topography), site properties (e.g., surface conditions, subsurface hydraulic properties, water quality), and site boundary conditions, input forcings, and extreme events (e.g., stream discharge, lake levels, precipitation, recharge, flood and drought characteristics). Available software tools for accessing established databases, retrieving the data, and integrating it with models were identified and reviewed. The emphasis in this review was on existing software products with minimal required modifications to enable their use with the FRAMES modeling framework. The ability of four of these tools to access and retrieve the identified data sources was reviewed. These four software tools were the Hydrologic Data Acquisition and Processing System (HDAPS), Integrated Water Resources Modeling System (IWRMS) External Data Harvester, Data for Environmental Modeling Environmental Data Download Tool (D4EM EDDT), and the FRAMES Internet Database Tools. The IWRMS External Data Harvester and the D4EM EDDT were identified as the most promising tools based on their ability to access and

  19. Characterizing Drought Events from a Hydrological Model Ensemble

    Science.gov (United States)

    Smith, Katie; Parry, Simon; Prudhomme, Christel; Hannaford, Jamie; Tanguy, Maliko; Barker, Lucy; Svensson, Cecilia

    2017-04-01

    Hydrological droughts are a slow onset natural hazard that can affect large areas. Within the United Kingdom there have been eight major drought events over the last 50 years, with several events acting at the continental scale, and covering the entire nation. Many of these events have lasted several years and had significant impacts on agriculture, the environment and the economy. Generally in the UK, due to a northwest-southeast gradient in rainfall and relief, as well as varying underlying geology, droughts tend to be most severe in the southeast, which can threaten water supplies to the capital in London. With the impacts of climate change likely to increase the severity and duration of drought events worldwide, it is crucial that we gain an understanding of the characteristics of some of the longer and more extreme droughts of the 19th and 20th centuries, so we may utilize this information in planning for the future. Hydrological models are essential both for reconstructing such events that predate streamflow records, and for use in drought forecasting. However, whilst the uncertainties involved in modelling hydrological extremes on the flooding end of the flow regime have been studied in depth over the past few decades, the uncertainties in simulating droughts and low flow events have not yet received such rigorous academic attention. The "Cascade of Uncertainty" approach has been applied to explore uncertainty and coherence across simulations of notable drought events from the past 50 years using the airGR family of daily lumped catchment models. Parameter uncertainty has been addressed using a Latin Hypercube sampled experiment of 500,000 parameter sets per model (GR4J, GR5J and GR6J), over more than 200 catchments across the UK. The best performing model parameterisations, determined using a multi-objective function approach, have then been taken forward for use in the assessment of the impact of model parameters and model structure on drought event

  20. Hydrologic and geochemical modeling of a karstic Mediterranean watershed

    Directory of Open Access Journals (Sweden)

    N. P. Nikolaidis

    2012-01-01

    Full Text Available The SWAT model was modified to simulate the hydrologic and chemical response of karstic systems and assess the impacts of land use management and climate change of an intensively managed Mediterranean watershed in Crete, Greece. A methodology was developed for the determination of the extended karst area contributing to the spring flow as well as the degree of dilution of nitrates due to permanent karst water volume. The modified SWAT model has been able to capture the temporal variability of both karst flow and surface runoff using high frequency monitoring data collected since 2004 in addition to long term flow time series collected since 1973. The overall hydrologic budget of the karst was estimated and its evaporative losses were calculated to be 28% suggesting a very high rate of karst infiltration. Nitrate chemistry of the karst was simulated by calibrating a dilution factor allowing for the estimation of the total karstic groundwater volume to approximately 500 million m3 of reserve water. The nitrate simulation results suggested a significant impact of livestock grazing on the karstic groundwater and on surface water quality. Finally, simulation results for a set of climate change scenarios suggested a 17% decrease in precipitation, 8% decrease in ET and 22% decrease in flow in 2030–2050 compared to 2010–2020. A validated tool for integrated water management of karst areas has been developed, providing policy makers an instrument for water management that could tackle the increasing water scarcity in the island.

  1. Modelling of green roof hydrological performance for urban drainage applications

    Science.gov (United States)

    Locatelli, Luca; Mark, Ole; Mikkelsen, Peter Steen; Arnbjerg-Nielsen, Karsten; Bergen Jensen, Marina; Binning, Philip John

    2014-11-01

    Green roofs are being widely implemented for stormwater management and their impact on the urban hydrological cycle can be evaluated by incorporating them into urban drainage models. This paper presents a model of green roof long term and single event hydrological performance. The model includes surface and subsurface storage components representing the overall retention capacity of the green roof which is continuously re-established by evapotranspiration. The runoff from the model is described through a non-linear reservoir approach. The model was calibrated and validated using measurement data from 3 different extensive sedum roofs in Denmark. These data consist of high-resolution measurements of runoff, precipitation and atmospheric variables in the period 2010-2012. The hydrological response of green roofs was quantified based on statistical analysis of the results of a 22-year (1989-2010) continuous simulation with Danish climate data. The results show that during single events, the 10 min runoff intensities were reduced by 10-36% for 5-10 years return period and 40-78% for 0.1-1 year return period; the runoff volumes were reduced by 2-5% for 5-10 years return period and 18-28% for 0.1-1 year return period. Annual runoff volumes were estimated to be 43-68% of the total precipitation. The peak time delay was found to greatly vary from 0 to more than 40 min depending on the type of event, and a general decrease in the time delay was observed for increasing rainfall intensities. Furthermore, the model was used to evaluate the variation of the average annual runoff from green roofs as a function of the total available storage and vegetation type. The results show that even a few millimeters of storage can reduce the mean annual runoff by up to 20% when compared to a traditional roof and that the mean annual runoff is not linearly related to the storage. Green roofs have therefore the potential to be important parts of future urban stormwater management plans.

  2. European Continental Scale Hydrological Model, Limitations and Challenges

    Science.gov (United States)

    Rouholahnejad, E.; Abbaspour, K.

    2014-12-01

    The pressures on water resources due to increasing levels of societal demand, increasing conflict of interest and uncertainties with regard to freshwater availability create challenges for water managers and policymakers in many parts of Europe. At the same time, climate change adds a new level of pressure and uncertainty with regard to freshwater supplies. On the other hand, the small-scale sectoral structure of water management is now reaching its limits. The integrated management of water in basins requires a new level of consideration where water bodies are to be viewed in the context of the whole river system and managed as a unit within their basins. In this research we present the limitations and challenges of modelling the hydrology of the continent Europe. The challenges include: data availability at continental scale and the use of globally available data, streamgauge data quality and their misleading impacts on model calibration, calibration of large-scale distributed model, uncertainty quantification, and computation time. We describe how to avoid over parameterization in calibration process and introduce a parallel processing scheme to overcome high computation time. We used Soil and Water Assessment Tool (SWAT) program as an integrated hydrology and crop growth simulator to model water resources of the Europe continent. Different components of water resources are simulated and crop yield and water quality are considered at the Hydrological Response Unit (HRU) level. The water resources are quantified at subbasin level with monthly time intervals for the period of 1970-2006. The use of a large-scale, high-resolution water resources models enables consistent and comprehensive examination of integrated system behavior through physically-based, data-driven simulation and provides the overall picture of water resources temporal and spatial distribution across the continent. The calibrated model and results provide information support to the European Water

  3. Inverse hydrological modelling of spatio-temporal rainfall patterns

    Science.gov (United States)

    Grundmann, Jens; Hörning, Sebastian; Bárdossy, András

    2016-04-01

    Distributed hydrological models are commonly used for simulating the non-linear response of a watershed to rainfall events for addressing different hydrological properties of the landscape. Such models are driven by spatial rainfall patterns for consecutive time steps, which are normally generated from point measurements using spatial interpolation methods. However, such methods fail in reproducing the true spatio-temporal rainfall patterns especially in data scarce regions with poorly gauged catchments or for highly dynamic, small scaled rainstorms which are not well recorded by existing monitoring networks. Consequently, uncertainties are associated with poorly identified spatio-temporal rainfall distribution in distributed rainfall-runoff-modelling since the amount of rainfall received by a catchment as well as the dynamics of the runoff generation of flood waves are underestimated. For addressing these challenges a novel methodology for inverse hydrological modelling is proposed using a Markov-Chain-Monte-Carlo framework. Thereby, potential candidates of spatio-temporal rainfall patterns are generated and selected according their ability to reproduce the observed surface runoff at the catchment outlet for a given transfer function in a best way. The Methodology combines the concept of random mixing of random spatial fields with a grid-based spatial distributed rainfall runoff model. The conditional target rainfall field is obtained as a linear combination of unconditional spatial random fields. The corresponding weights of the linear combination are selected such that the spatial variability of the rainfall amounts as well as the actual observed rainfall values are reproduced. The functionality of the methodology is demonstrated on a synthetic example. Thereby, the known spatio-temporal distribution of rainfall is reproduced for a given number of point observations of rainfall and the integral catchment response at the catchment outlet for a synthetic catchment

  4. SWAT Modeling for Depression-Dominated Areas: How Do Depressions Manipulate Hydrologic Modeling?

    Directory of Open Access Journals (Sweden)

    Mohsen Tahmasebi Nasab

    2017-01-01

    Full Text Available Modeling hydrologic processes for depression-dominated areas such as the North American Prairie Pothole Region is complex and reliant on a clear understanding of dynamic filling-spilling-merging-splitting processes of numerous depressions over the surface. Puddles are spatially distributed over a watershed and their sizes, storages, and interactions vary over time. However, most hydrologic models fail to account for these dynamic processes. Like other traditional methods, depressions are filled as a required preprocessing step in the Soil and Water Assessment Tool (SWAT. The objective of this study was to facilitate hydrologic modeling for depression-dominated areas by coupling SWAT with a Puddle Delineation (PD algorithm. In the coupled PD-SWAT model, the PD algorithm was utilized to quantify topographic details, including the characteristics, distribution, and hierarchical relationships of depressions, which were incorporated into SWAT at the hydrologic response unit (HRU scale. The new PD-SWAT model was tested for a large watershed in North Dakota under real precipitation events. In addition, hydrologic modeling of a small watershed was conducted under two extreme high and low synthetic precipitation conditions. In particular, the PD-SWAT was compared against the regular SWAT based on depressionless DEMs. The impact of depressions on the hydrologic modeling of the large and small watersheds was evaluated. The simulation results for the large watershed indicated that SWAT systematically overestimated the outlet discharge, which can be attributed to the failure to account for the hydrologic effects of depressions. It was found from the PD-SWAT modeling results that at the HRU scale surface runoff initiation was significantly delayed due to the threshold control of depressions. Under the high precipitation scenario, depressions increased the surface runoff peak. However, the low precipitation scenario could not fully fill depressions to reach

  5. The sense and non-sense of plot-scale, catchment-scale, continental-scale and global-scale hydrological modelling

    Science.gov (United States)

    Bronstert, Axel; Heistermann, Maik; Francke, Till

    2017-04-01

    Hydrological models aim at quantifying the hydrological cycle and its constituent processes for particular conditions, sites or periods in time. Such models have been developed for a large range of spatial and temporal scales. One must be aware that the question which is the appropriate scale to be applied depends on the overall question under study. Therefore, it is not advisable to give a general applicable guideline on what is "the best" scale for a model. This statement is even more relevant for coupled hydrological, ecological and atmospheric models. Although a general statement about the most appropriate modelling scale is not recommendable, it is worth to have a look on what are the advantages and the shortcomings of micro-, meso- and macro-scale approaches. Such an appraisal is of increasing importance, since increasingly (very) large / global scale approaches and models are under operation and therefore the question arises how far and for what purposes such methods may yield scientifically sound results. It is important to understand that in most hydrological (and ecological, atmospheric and other) studies process scale, measurement scale, and modelling scale differ from each other. In some cases, the differences between theses scales can be of different orders of magnitude (example: runoff formation, measurement and modelling). These differences are a major source of uncertainty in description and modelling of hydrological, ecological and atmospheric processes. Let us now summarize our viewpoint of the strengths (+) and weaknesses (-) of hydrological models of different scales: Micro scale (e.g. extent of a plot, field or hillslope): (+) enables process research, based on controlled experiments (e.g. infiltration; root water uptake; chemical matter transport); (+) data of state conditions (e.g. soil parameter, vegetation properties) and boundary fluxes (e.g. rainfall or evapotranspiration) are directly measurable and reproducible; (+) equations based on

  6. Advances and visions in large-scale hydrological modelling: findings from the 11th Workshop on Large-Scale Hydrological Modelling

    Directory of Open Access Journals (Sweden)

    P. Döll

    2008-10-01

    Full Text Available Large-scale hydrological modelling has become increasingly wide-spread during the last decade. An annual workshop series on large-scale hydrological modelling has provided, since 1997, a forum to the German-speaking community for discussing recent developments and achievements in this research area. In this paper we present the findings from the 2007 workshop which focused on advances and visions in large-scale hydrological modelling. We identify the state of the art, difficulties and research perspectives with respect to the themes "sensitivity of model results", "integrated modelling" and "coupling of processes in hydrosphere, atmosphere and biosphere". Some achievements in large-scale hydrological modelling during the last ten years are presented together with a selection of remaining challenges for the future.

  7. Improving distributed hydrologic modeling and global land cover data

    Science.gov (United States)

    Broxton, Patrick

    Distributed models of the land surface are essential for global climate models because of the importance of land-atmosphere exchanges of water, energy, momentum. They are also used for high resolution hydrologic simulation because of the need to capture non-linear responses to spatially variable inputs. Continued improvements to these models, and the data which they use, is especially important given ongoing changes in climate and land cover. In hydrologic models, important aspects are sometimes neglected due to the need to simplify the models for operational simulation. For example, operational flash flood models do not consider the role of snow and are often lumped (i.e. do not discretize a watershed into multiple units, and so do not fully consider the effect of intense, localized rainstorms). To address this deficiency, an overland flow model is coupled with a subsurface flow model to create a distributed flash flood forecasting system that can simulate flash floods that involve rain on snow. The model is intended for operational use, and there are extensive algorithms to incorporate high-resolution hydrometeorologic data, to assist in the calibration of the models, and to run the model in real time. A second study, which is designed to improve snow simulation in forested environments, demonstrates the importance of explicitly representing a near canopy environment in snow models, instead of only representing open and canopy covered areas (i.e. with % canopy fraction), as is often done. Our modeling, which uses canopy structure information from Aerial Laser Survey Mapping at 1 meter resolution, suggests that areas near trees have more net snow water input than surrounding areas because of the lack of snow interception, shading by the trees, and the effects of wind. In addition, the greatest discrepancy between our model simulations that explicitly represent forest structure and those that do not occur in areas with more canopy edges. In addition, two value

  8. Neural Network Hydrological Modelling: Linear Output Activation Functions?

    Science.gov (United States)

    Abrahart, R. J.; Dawson, C. W.

    2005-12-01

    The power to represent non-linear hydrological processes is of paramount importance in neural network hydrological modelling operations. The accepted wisdom requires non-polynomial activation functions to be incorporated in the hidden units such that a single tier of hidden units can thereafter be used to provide a 'universal approximation' to whatever particular hydrological mechanism or function is of interest to the modeller. The user can select from a set of default activation functions, or in certain software packages, is able to define their own function - the most popular options being logistic, sigmoid and hyperbolic tangent. If a unit does not transform its inputs it is said to possess a 'linear activation function' and a combination of linear activation functions will produce a linear solution; whereas the use of non-linear activation functions will produce non-linear solutions in which the principle of superposition does not hold. For hidden units, speed of learning and network complexities are important issues. For the output units, it is desirable to select an activation function that is suited to the distribution of the target values: e.g. binary targets (logistic); categorical targets (softmax); continuous-valued targets with a bounded range (logistic / tanh); positive target values with no known upper bound (exponential; but beware of overflow); continuous-valued targets with no known bounds (linear). It is also standard practice in most hydrological applications to use the default software settings and to insert a set of identical non-linear activation functions in the hidden layer and output layer processing units. Mixed combinations have nevertheless been reported in several hydrological modelling papers and the full ramifications of such activities requires further investigation and assessment i.e. non-linear activation functions in the hidden units connected to linear or clipped-linear activation functions in the output unit. There are two

  9. Quantile hydrologic model selection and model structure deficiency assessment: 1. Theory

    NARCIS (Netherlands)

    Pande, S.

    2013-01-01

    A theory for quantile based hydrologic model selection and model structure deficiency assessment is presented. The paper demonstrates that the degree to which a model selection problem is constrained by the model structure (measured by the Lagrange multipliers of the constraints) quantifies

  10. Quantile hydrologic model selection and model structure deficiency assessment: 2. Applications

    NARCIS (Netherlands)

    Pande, S.

    2013-01-01

    Quantile hydrologic model selection and structure deficiency assessment is applied in three case studies. The performance of quantile model selection problem is rigorously evaluated using a model structure on the French Broad river basin data set. The case study shows that quantile model selection

  11. Quantile hydrologic model selection and model structure deficiency assessment: 1. Theory

    NARCIS (Netherlands)

    Pande, S.

    2013-01-01

    A theory for quantile based hydrologic model selection and model structure deficiency assessment is presented. The paper demonstrates that the degree to which a model selection problem is constrained by the model structure (measured by the Lagrange multipliers of the constraints) quantifies structur

  12. Operational Testing of Satellite based Hydrological Model (SHM)

    Science.gov (United States)

    Gaur, Srishti; Paul, Pranesh Kumar; Singh, Rajendra; Mishra, Ashok; Gupta, Praveen Kumar; Singh, Raghavendra P.

    2017-04-01

    Incorporation of the concept of transposability in model testing is one of the prominent ways to check the credibility of a hydrological model. Successful testing ensures ability of hydrological models to deal with changing conditions, along with its extrapolation capacity. For a newly developed model, a number of contradictions arises regarding its applicability, therefore testing of credibility of model is essential to proficiently assess its strength and limitations. This concept emphasizes to perform 'Hierarchical Operational Testing' of Satellite based Hydrological Model (SHM), a newly developed surface water-groundwater coupled model, under PRACRITI-2 program initiated by Space Application Centre (SAC), Ahmedabad. SHM aims at sustainable water resources management using remote sensing data from Indian satellites. It consists of grid cells of 5km x 5km resolution and comprises of five modules namely: Surface Water (SW), Forest (F), Snow (S), Groundwater (GW) and Routing (ROU). SW module (functions in the grid cells with land cover other than forest and snow) deals with estimation of surface runoff, soil moisture and evapotranspiration by using NRCS-CN method, water balance and Hragreaves method, respectively. The hydrology of F module is dependent entirely on sub-surface processes and water balance is calculated based on it. GW module generates baseflow (depending on water table variation with the level of water in streams) using Boussinesq equation. ROU module is grounded on a cell-to-cell routing technique based on the principle of Time Variant Spatially Distributed Direct Runoff Hydrograph (SDDH) to route the generated runoff and baseflow by different modules up to the outlet. For this study Subarnarekha river basin, flood prone zone of eastern India, has been chosen for hierarchical operational testing scheme which includes tests under stationary as well as transitory conditions. For this the basin has been divided into three sub-basins using three flow

  13. Steady electrodiffusion in hydrogel-colloid composites: macroscale properties from microscale electrokinetics

    OpenAIRE

    Hill, Reghan J.

    2010-01-01

    A rigorous microscale electrokinetic model for hydrogel-colloid composites is adopted to compute macroscale profiles of electrolyte concentration, electrostatic potential, and hydrostatic pressure across membranes that separate electrolytes with different concentrations. The membranes are uncharged polymeric hydrogels in which charged spherical colloidal particles are immobilized and randomly dispersed with a low solid volume fraction. Bulk membrane characteristics and performance are calcula...

  14. Spatial calibration and temporal validation of flow for regional scale hydrologic modeling

    Science.gov (United States)

    Physically based regional scale hydrologic modeling is gaining importance for planning and management of water resources. Calibration and validation of such regional scale model is necessary before applying it for scenario assessment. However, in most regional scale hydrologic modeling, flow validat...

  15. Elements of a flexible approach for conceptual hydrological modeling: 1. Motivation and theoretical development

    NARCIS (Netherlands)

    Fenicia, F.; Kavetski, D.; Savenije, H.H.G.

    2011-01-01

    This paper introduces a flexible framework for conceptual hydrological modeling, with two related objectives: (1) generalize and systematize the currently fragmented field of conceptual models and (2) provide a robust platform for understanding and modeling hydrological systems. In contrast to curre

  16. From spatially variable streamflow to distributed hydrological models: Analysis of key modeling decisions

    Science.gov (United States)

    Fenicia, Fabrizio; Kavetski, Dmitri; Savenije, Hubert H. G.; Pfister, Laurent

    2016-02-01

    This paper explores the development and application of distributed hydrological models, focusing on the key decisions of how to discretize the landscape, which model structures to use in each landscape element, and how to link model parameters across multiple landscape elements. The case study considers the Attert catchment in Luxembourg—a 300 km2 mesoscale catchment with 10 nested subcatchments that exhibit clearly different streamflow dynamics. The research questions are investigated using conceptual models applied at hydrologic response unit (HRU) scales (1-4 HRUs) on 6 hourly time steps. Multiple model structures are hypothesized and implemented using the SUPERFLEX framework. Following calibration, space/time model transferability is tested using a split-sample approach, with evaluation criteria including streamflow prediction error metrics and hydrological signatures. Our results suggest that: (1) models using geology-based HRUs are more robust and capture the spatial variability of streamflow time series and signatures better than models using topography-based HRUs; this finding supports the hypothesis that, in the Attert, geology exerts a stronger control than topography on streamflow generation, (2) streamflow dynamics of different HRUs can be represented using distinct and remarkably simple model structures, which can be interpreted in terms of the perceived dominant hydrologic processes in each geology type, and (3) the same maximum root zone storage can be used across the three dominant geological units with no loss in model transferability; this finding suggests that the partitioning of water between streamflow and evaporation in the study area is largely independent of geology and can be used to improve model parsimony. The modeling methodology introduced in this study is general and can be used to advance our broader understanding and prediction of hydrological behavior, including the landscape characteristics that control hydrologic response, the

  17. Hydrologic Modeling of the White Sands Dune Field, New Mexico

    Science.gov (United States)

    Bourret, S. M.; Newton, B. T.; Person, M. A.

    2013-12-01

    The shallow groundwater flow system of White Sands dune field, located within the Tularosa Basin of Southern New Mexico, likely stabilizes the base of the largest gypsum dunefield in the world. Water table geometry and elevation play a critical role in controlling dune thickness, spatial extent, and migration rates. The White Sands National Monument (WHSA) is concerned that lowering the water table may lead to increased scour and migration of the dune field, which could be unfavorable to the preservation of the flora and fauna that have adapted to survive there. In response to projected increases in groundwater pumping in the regional Tularosa Basin groundwater system, changes in surface water use, and the threat of climate change, the WHSA is interested in understanding how these changes on a regional scale may impact the shallow dune aquifer. We have collected hydrological, geochemical, and geophysical data in order to identify the sources of recharge that contribute to the shallow dune aquifer and to assess interactions between this water table aquifer and the basin-scale, regional system. Vertical head gradients, temperature, and water quality data strongly suggest that local precipitation is the primary source of recharge to the dune aquifer today. This suggests that the modern dune system is relatively isolated from the deeper regional system. However, geochemical and electrical resistivity data indicates that the deeper basin groundwater system does contribute to the shallow system and suggests that hydrologic conditions have changed on geologic time scales. We have constructed a preliminary cross-sectional hydrologic model to attempt to characterize the interaction of the shallow dune aquifer with the deeper basin groundwater. The model cross-section extends about 80 km across the Tularosa Basin in a NW-SE direction parallel to the primary flow path. We represented 6 km of Precambrian crystalline basement, Paleozoic sedimentary rocks as well as Pleistocene

  18. Improved cavity detection from coupled seismic and hydrologic models

    Science.gov (United States)

    Desilets, S.; Bonal, N. D.; Desilets, D.

    2012-12-01

    Seismic methods hold much promise for cavity detection, but the results from field measurements have been frustratingly inconsistent between field sites. The reasons for the inconsistencies are not fully understood, though water saturation in the near-surface may be responsible to some extent. The conventional approach has been to focus on reflections and refractions generated from the impedance contrast of the cavity wall itself, where the dimensions and geometry of the cavity should play key roles. Here, we instead focus on the influence of impedance contrasts that are generated by hydrologic processes in the adjacent porous medium. These contrasts can potentially increase or decrease the reflection/refraction footprint of the cavity itself. Detectable hydrologic anomalies can be created by the simple drainage of groundwater into the cavity (initially saturated conditions) or by the creation of a capillary barrier around the cavity (initially unsaturated conditions). Because both processes ultimately involve unsaturated conditions we use HYDRUS 2D to numerically solve the Richard's equation and simulate flow through the vadose zone. Using the generated soil moisture information and Brutsaert's (1964) saturation-velocity relation, we constructed velocity models. Our simulations suggest several scenarios where changes in saturation due to the cavity may be utilized to enhance cavity detection with seismic waves. One simulation is for unsaturated conditions in the top 10 meters of soil, where capillary forces exert a major influence on velocity. In this case, the impedance contrast is greatest for near-saturated soils. Deeper cavities (100s of meters) in permeable saturated materials are also favorable due to the sharp impedance contrast between saturated and unsaturated material. Our hydrology-determined velocity models are then used in finite-difference wave propagation simulations to determine the effects on seismic waves at various depths and saturations

  19. Dynamic hydrologic modeling using the zero-parameter Budyko model with instantaneous dryness index

    Science.gov (United States)

    Biswal, Basudev

    2016-09-01

    Long-term partitioning of hydrologic quantities is achieved by using the zero-parameter Budyko model which defines a dryness index. However, this approach is not suitable for dynamic partitioning particularly at diminishing timescales, and therefore, a universally applicable zero-parameter model remains elusive. Here an instantaneous dryness index is proposed which enables dynamic hydrologic modeling using the Budyko model. By introducing a "decay function" that characterizes the effects of antecedent rainfall and solar energy on the dryness state of a basin at a time, I propose the concept of instantaneous dryness index and use the Budyko function to perform continuous hydrologic partitioning. Using the same decay function, I then obtain discharge time series from the effective rainfall time series. The model is evaluated by considering data form 63 U.S. Geological Survey basins. Results indicate the possibility of using the proposed framework as an alternative platform for prediction in ungagued basins.

  20. Climate change impact assessment on mountain snow hydrology by water and energy budget-based distributed hydrological model

    Science.gov (United States)

    Bhatti, Asif M.; Koike, Toshio; Shrestha, Maheswor

    2016-12-01

    A water and energy budget-based distributed hydrological model with improved snow physics (WEB-DHM-S) was applied to elucidate the impact of climate change on mountain snow hydrology in the Shubuto River basin, Hokkaido, Japan. The simulated spatial distribution of snow cover was evaluated using the Moderate Resolution Imaging Spectroradiometer (MODIS) 8-day maximum snow-cover extent (MOD10A2) product, which revealed the model's capability for capturing the spatiotemporal variations in snow cover within the study area. Four Atmosphere Ocean General Circulation Models (AOGCMs) were selected and the SRESA1B emission scenario of the Intergovernmental Panel on Climate Change was used to describe climate predictions in the basin. All AOGCMs predict a future decrease in snowmelt contribution to total discharge 11-22% and an average decrease in SWE of 36%, with a shift in peak SWE by 4-14 days. The shift in runoff regime is broadly consistent between the AOGCMs with snowmelt-induced peak discharge expected to occur on average about two weeks earlier in the future hydrological year. The warming climate will drive a shift in runoff regime from a combined rainfall- and snowmelt-driven regime to one with a reduced contribution from snowmelt. The results of the study revealed that the model could be successfully applicable on the basin scale to simulate river discharge and snow processes and to investigate the effect of climate change on hydrological processes. This research contributes to improve the understanding of basin hydrological responses and the pace of change associated with climate variability.

  1. Limits and failures in hydrology: examples and lessons learned from three decades of process oriented hydrological modelling

    Science.gov (United States)

    Bronstert, Axel

    2016-04-01

    In hydrological sciences there have been rather many attempts to develop new mathematical analysis and modelling tools. Some (or even many?) of them failed or were at least only partially successful. Unfortunately, such nun-successful attempts are hardly reported on, because our common academic recognition is based on reports about success only. With all due respect to successful attempts, the scientific community could benefit a lot from reports of unsuccessful attempts or unexpected results. Therefore, in this contribution, the author presents examples of modelling failures from his own experiences during the last three decades. Emphasis is given on results obtained from process-oriented hydrological models, where the "right answer" was obtained "for the wrong reasons". Such example comprise, for instance, modelling infiltration experiments at the plot scale, modelling runoff generation from hillslope scale and in experimental catchments and modelling runoff from glaciated catchments It is explained how the "wrong reasons" could be identified and what was learned from such failures. It is argued that failures, which causes can be identified by the modeller or anybody else, could significantly contribute to a progress in hydrological system understanding or - at least - to the identification of research needs. Identification of causes of failure may even contribute more to scientific progress then brute force modelling of parameter sensitivity and uncertainty.

  2. On the deterministic and stochastic use of hydrologic models

    Science.gov (United States)

    Farmer, William H.; Vogel, Richard M.

    2016-07-01

    Environmental simulation models, such as precipitation-runoff watershed models, are increasingly used in a deterministic manner for environmental and water resources design, planning, and management. In operational hydrology, simulated responses are now routinely used to plan, design, and manage a very wide class of water resource systems. However, all such models are calibrated to existing data sets and retain some residual error. This residual, typically unknown in practice, is often ignored, implicitly trusting simulated responses as if they are deterministic quantities. In general, ignoring the residuals will result in simulated responses with distributional properties that do not mimic those of the observed responses. This discrepancy has major implications for the operational use of environmental simulation models as is shown here. Both a simple linear model and a distributed-parameter precipitation-runoff model are used to document the expected bias in the distributional properties of simulated responses when the residuals are ignored. The systematic reintroduction of residuals into simulated responses in a manner that produces stochastic output is shown to improve the distributional properties of the simulated responses. Every effort should be made to understand the distributional behavior of simulation residuals and to use environmental simulation models in a stochastic manner.

  3. River network solution for a distributed hydrological model and applications

    Science.gov (United States)

    Jha, Raghunath; Herath, Srikantha; Musiake, Katumi

    2000-02-01

    A simultaneous solution for one-dimensional unsteady flow routing for a network of rivers has been developed, which can be used either with a complete distributed hydrological model, a simple rainfall-runoff model or as a stand alone river routing model. Either dynamic or kinematic solution schemes can be selected to simulate the river flows. The river network is either generated from the Digital Elevation Model (DEM) or directly input to the model. The model can handle any number of upstream channels and computational points. A sparse matrix solution algorithm is used to solve the 2N×2N matrix resulting from N nodes in the network. A submodule generates the initial water depth and discharge at each computational point from equilibrium discharge in the absence of observed initial conditions. The model is applied in three sub-catchments of the Chao Phraya river basin, Thailand, considering three different conditions. The simulated results show good agreement with observed discharges and provide insight to water level fluctuations, especially where tributaries join the main channel.

  4. On the deterministic and stochastic use of hydrologic models

    Science.gov (United States)

    Farmer, William H.; Vogel, Richard M.

    2016-01-01

    Environmental simulation models, such as precipitation-runoff watershed models, are increasingly used in a deterministic manner for environmental and water resources design, planning, and management. In operational hydrology, simulated responses are now routinely used to plan, design, and manage a very wide class of water resource systems. However, all such models are calibrated to existing data sets and retain some residual error. This residual, typically unknown in practice, is often ignored, implicitly trusting simulated responses as if they are deterministic quantities. In general, ignoring the residuals will result in simulated responses with distributional properties that do not mimic those of the observed responses. This discrepancy has major implications for the operational use of environmental simulation models as is shown here. Both a simple linear model and a distributed-parameter precipitation-runoff model are used to document the expected bias in the distributional properties of simulated responses when the residuals are ignored. The systematic reintroduction of residuals into simulated responses in a manner that produces stochastic output is shown to improve the distributional properties of the simulated responses. Every effort should be made to understand the distributional behavior of simulation residuals and to use environmental simulation models in a stochastic manner.

  5. Assimilating multi-source uncertainties of a parsimonious conceptual hydrological model using hierarchical Bayesian modeling

    Science.gov (United States)

    Wei Wu; James Clark; James Vose

    2010-01-01

    Hierarchical Bayesian (HB) modeling allows for multiple sources of uncertainty by factoring complex relationships into conditional distributions that can be used to draw inference and make predictions. We applied an HB model to estimate the parameters and state variables of a parsimonious hydrological model – GR4J – by coherently assimilating the uncertainties from the...

  6. Multi-model ensemble hydrologic prediction and uncertainties analysis

    Directory of Open Access Journals (Sweden)

    S. Jiang

    2014-09-01

    Full Text Available Modelling uncertainties (i.e. input errors, parameter uncertainties and model structural errors inevitably exist in hydrological prediction. A lot of recent attention has focused on these, of which input error modelling, parameter optimization and multi-model ensemble strategies are the three most popular methods to demonstrate the impacts of modelling uncertainties. In this paper the Xinanjiang model, the Hybrid rainfall–runoff model and the HYMOD model were applied to the Mishui Basin, south China, for daily streamflow ensemble simulation and uncertainty analysis. The three models were first calibrated by two parameter optimization algorithms, namely, the Shuffled Complex Evolution method (SCE-UA and the Shuffled Complex Evolution Metropolis method (SCEM-UA; next, the input uncertainty was accounted for by introducing a normally-distributed error multiplier; then, the simulation sets calculated from the three models were combined by Bayesian model averaging (BMA. The results show that both these parameter optimization algorithms generate good streamflow simulations; specifically the SCEM-UA can imply parameter uncertainty and give the posterior distribution of the parameters. Considering the precipitation input uncertainty, the streamflow simulation precision does not improve very much. While the BMA combination not only improves the streamflow prediction precision, it also gives quantitative uncertainty bounds for the simulation sets. The SCEM-UA calculated prediction interval is better than the SCE-UA calculated one. These results suggest that considering the model parameters' uncertainties and doing multi-model ensemble simulations are very practical for streamflow prediction and flood forecasting, from which more precision prediction and more reliable uncertainty bounds can be generated.

  7. Calibration of hydrological models using flow-duration curves

    Directory of Open Access Journals (Sweden)

    I. K. Westerberg

    2011-07-01

    Full Text Available The degree of belief we have in predictions from hydrologic models will normally depend on how well they can reproduce observations. Calibrations with traditional performance measures, such as the Nash-Sutcliffe model efficiency, are challenged by problems including: (1 uncertain discharge data, (2 variable sensitivity of different performance measures to different flow magnitudes, (3 influence of unknown input/output errors and (4 inability to evaluate model performance when observation time periods for discharge and model input data do not overlap. This paper explores a calibration method using flow-duration curves (FDCs to address these problems. The method focuses on reproducing the observed discharge frequency distribution rather than the exact hydrograph. It consists of applying limits of acceptability for selected evaluation points (EPs on the observed uncertain FDC in the extended GLUE approach. Two ways of selecting the EPs were tested – based on equal intervals of discharge and of volume of water. The method was tested and compared to a calibration using the traditional model efficiency for the daily four-parameter WASMOD model in the Paso La Ceiba catchment in Honduras and for Dynamic TOPMODEL evaluated at an hourly time scale for the Brue catchment in Great Britain. The volume method of selecting EPs gave the best results in both catchments with better calibrated slow flow, recession and evaporation than the other criteria. Observed and simulated time series of uncertain discharges agreed better for this method both in calibration and prediction in both catchments. An advantage with the method is that the rejection criterion is based on an estimation of the uncertainty in discharge data and that the EPs of the FDC can be chosen to reflect the aims of the modelling application, e.g. using more/less EPs at high/low flows. While the method appears less sensitive to epistemic input/output errors than previous use of limits of

  8. Test of Landsat-based urban hydrologic modeling

    Science.gov (United States)

    Jackson, T. J.; Ragan, R. M.; Fitch, W. N.

    1977-01-01

    A description is presented of the Fourmile Run Study which has been conducted to evaluate Landsat remote sensing as a method of defining input parameters required by urban hydrologic planning models. The evaluation was a part of water resource planning investigations concerning the Fourmile Run Watershed. The investigations involved an examination of the relationship between urban development and flooding for the Fourmile Run Basin. The study indicates that Landsat data provide a suitable source of land cover data for investigations conducted at the planning level. An estimation of the percentage of impervious area on the basis of Landsat data is less expensive than a use of aerial photos in planning studies. Only limited success could be achieved when Landsat data were used for smaller areal units.

  9. A coupled energy transport and hydrological model for urban canopies

    Science.gov (United States)

    Wang, Z.; Bou-Zeid, E.; Smith, J. A.

    2011-12-01

    Urban land-atmosphere interaction has been attracting more research efforts in order to understand the complex physics of flow and mass and heat transport in urban surfaces and the lower urban atmosphere. In this work, we developed and implemented a new physically-based single-layer urban canopy model, coupling the surface exchange of energy and the subsurface transport of water/soil moisture. The new model incorporates sub-facet heterogeneity for each urban surface (roof, wall or ground). This better simulates the energy transport in urban canopy layers, especially over low-intensity built (suburban type) terrains that include a significant fraction of vegetated surfaces. We implemented detailed urban hydrological models for both natural terrains (bare soil and vegetation) and porous engineered materials with water-holding capacity (concrete, gravel, etc). The skill of the new scheme was tested against experimental data collected through a wireless sensor network deployed over the campus of Princeton University. The model performance was found to be robust and insensitive to changes in weather conditions or seasonal variability. Predictions of the volumetric soil water content were also in good agreement with field measurements, highlighting the model capability of capturing subsurface water transport for urban lawns. The new model was also applied to a case study assessing different strategies, i.e. white versus green roofs, in the mitigation of urban heat island effect.

  10. An eco-hydrologic model of malaria outbreaks

    Directory of Open Access Journals (Sweden)

    E. Montosi

    2012-03-01

    Full Text Available Malaria is a geographically widespread infectious disease that is well known to be affected by climate variability at both seasonal and interannual timescales. In an effort to identify climatic factors that impact malaria dynamics, there has been considerable research focused on the development of appropriate disease models for malaria transmission and their consideration alongside climatic datasets. These analyses have focused largely on variation in temperature and rainfall as direct climatic drivers of malaria dynamics. Here, we further these efforts by considering additionally the role that soil water content may play in driving malaria incidence. Specifically, we hypothesize that hydro-climatic variability should be an important factor in controlling the availability of mosquito habitats, thereby governing mosquito growth rates. To test this hypothesis, we reduce a nonlinear eco-hydrologic model to a simple linear model through a series of consecutive assumptions and apply this model to malaria incidence data from three South African provinces. Despite the assumptions made in the reduction of the model, we show that soil water content can account for a significant portion of malaria's case variability beyond its seasonal patterns, whereas neither temperature nor rainfall alone can do so. Future work should therefore consider soil water content as a simple and computable variable for incorporation into climate-driven disease models of malaria and other vector-borne infectious diseases.

  11. Estimation of human-induced changes in terrestrial water storage through integration of GRACE satellite detection and hydrological modeling: A case study of the Yangtze River basin

    Science.gov (United States)

    Huang, Ying; Salama, Mhd. Suhyb; Krol, Maarten S.; Su, Zhongbo; Hoekstra, Arjen Y.; Zeng, Yijian; Zhou, Yunxuan

    2015-10-01

    Quantifying the human effects on water resources plays an important role in river basin management. In this study, we proposed a framework, which integrates the Gravity Recovery and Climate Experiment (GRACE) satellite estimation with macroscale hydrological model simulation, for detection and attribution of spatial terrestrial water storage (TWS) changes. In particular, it provides valuable insights for regions where ground-based measurements are inaccessible. Moreover, this framework takes into account the feedback between land and atmosphere and innovatively put forward several suggestions (e.g., study period selection, hydrological model selection based on soil moisture-climate interactions) to minimize the uncertainties brought by the interaction of human water use with terrestrial water fluxes. We demonstrate the use of the proposed framework in the Yangtze River basin of China. Our results show that, during the period 2003-2010, the TWS was continually increasing in the middle and south eastern reaches of the basin, at a mean rate of about 3 cm yr-1. This increment in TWS was attributed to anthropogenic modification of the hydrological cycle, rather than natural climate variability. The dominant contributor to the TWS excess was found to be intensive surface water irrigation, which recharged the water table in the middle and south eastern parts of the basin. Water impoundment in the Three Gorges Reservoir (TGR) is found to account for nearly 20% of the human-induced TWS increment in the region where the TGR is located. The proposed framework gives water managers/researchers a useful tool to investigate the spatial human effects on TWS changes.

  12. Effects of modeling decisions on cold region hydrological model performance: snow, soil and streamflow

    Science.gov (United States)

    Musselman, Keith; Clark, Martyn; Endalamaw, Abraham; Bolton, W. Robert; Nijssen, Bart; Arnold, Jeffrey

    2017-04-01

    Cold regions are characterized by intense spatial gradients in climate, vegetation and soil properties that determine the complex spatiotemporal patterns of snowpack evolution, frozen soil dynamics, catchment connectivity, and streamflow. These spatial gradients pose unique challenges for hydrological models, including: 1) how the spatial variability of the physical processes are best represented across a hierarchy of scales, and 2) what algorithms and parameter sets best describe the biophysical and hydrological processes at the spatial scale of interest. To address these topics, we apply the Structure for Unifying Multiple Modeling Alternatives (SUMMA) to simulate hydrological processes at the Caribou - Poker Creeks Research Watershed in the Alaskan sub-arctic Boreal forest. The site is characterized by numerous gauged headwater catchments ranging in size from 5 sq. km to 106 sq. km with varying extents (3% to 53%) of discontinuous permafrost that permits a multi-scale paired watershed analysis of the hydrological impacts of frozen soils. We evaluate the effects of model decisions on the skill of SUMMA to simulate observed snow and soil dynamics, and the spatial integration of these processes as catchment streamflow. Decisions such as the number of soil layers, total soil column depth, and vertical soil discretization are shown to have profound impacts on the simulation of seasonal active layer dynamics. Decisions on the spatial organization (lateral connectivity, representation of riparian response units, and the spatial discretization of the hydrological landscape) are shown to be as important as accurate snowpack and soil process representation in the simulation of streamflow. The work serves to better inform hydrological model decisions for cold region hydrologic evaluation and to improve predictive capacity for water resource planning.

  13. Hydrologic Setting and Conceptual Hydrologic Model of the Walker River Basin, West-Central Nevada

    Science.gov (United States)

    Lopes, Thomas J.; Allander, Kip K.

    2009-01-01

    The Walker River is the main source of inflow to Walker Lake, a closed-basin lake in west-central Nevada. Between 1882 and 2008, agricultural diversions resulted in a lake-level decline of more than 150 feet and storage loss of 7,400,000 acre-ft. Evaporative concentration increased dissolved solids from 2,500 to 17,000 milligrams per liter. The increase in salinity threatens the survival of the Lahontan cutthroat trout, a native species listed as threatened under the Endangered Species Act. This report describes the hydrologic setting of the Walker River basin and a conceptual hydrologic model of the relations among streams, groundwater, and Walker Lake with emphasis on the lower Walker River basin from Wabuska to Hawthorne, Nevada. The Walker River basin is about 3,950 square miles and straddles the California-Nevada border. Most streamflow originates as snowmelt in the Sierra Nevada. Spring runoff from the Sierra Nevada typically reaches its peak during late May to early June with as much as 2,800 cubic feet per second in the Walker River near Wabuska. Typically, 3 to 4 consecutive years of below average streamflow are followed by 1 or 2 years of average or above average streamflow. Mountain ranges are comprised of consolidated rocks with low hydraulic conductivities, but consolidated rocks transmit water where fractured. Unconsolidated sediments include fluvial deposits along the active channel of the Walker River, valley floors, alluvial slopes, and a playa. Sand and gravel deposited by the Walker River likely are discontinuous strata throughout the valley floor. Thick clay strata likely were deposited in Pleistocene Lake Lahontan and are horizontally continuous, except where strata have been eroded by the Walker River. At Walker Lake, sediments mostly are clay interbedded with alluvial slope, fluvial, and deltaic deposits along the lake margins. Coarse sediments form a multilayered, confined-aquifer system that could extend several miles from the shoreline

  14. Significant uncertainty in global scale hydrological modeling from precipitation data errors

    NARCIS (Netherlands)

    Weiland, Frederiek C. Sperna; Vrugt, Jasper A.; van Beek, Rens (L. ) P. H.; Weerts, Albrecht H.; Bierkens, Marc F. P.

    2015-01-01

    In the past decades significant progress has been made in the fitting of hydrologic models to data. Most of this work has focused on simple, CPU-efficient, lumped hydrologic models using discharge, water table depth, soil moisture, or tracer data from relatively small river basins. In this paper, we

  15. Significant uncertainty in global scale hydrological modeling from precipitation data erros

    NARCIS (Netherlands)

    Sperna Weiland, F.; Vrugt, J.A.; Beek, van P.H.; Weerts, A.H.; Bierkens, M.F.P.

    2015-01-01

    In the past decades significant progress has been made in the fitting of hydrologic models to data. Most of this work has focused on simple, CPU-efficient, lumped hydrologic models using discharge, water table depth, soil moisture, or tracer data from relatively small river basins. In this paper, we

  16. Parameterization of a hydrological model using remote sensing data

    Science.gov (United States)

    Oppelt, N.; Rathjens, H.; Müller, T.-L.

    2012-04-01

    The alteration of land cover by humans has multiple consequences on biological systems ranging from local to global scales. The United Nations have rated land use changes as one of the major issues for the coming centuries. In Northern Germany a significant land use change can be observed since 2004, i.e. the amendment of the Renewable Energies Act. Since then, an increasing number of biogas plants have been built resulting in an increased cultivation of so-called energy crops, especially in direct neighbourhood to these plants. Conversion of land is known to alter hydrological processes such as the exchange of energy and water. To investigate the effects of land use change on the water cycle in lowland river catchments in Northern Germany, we used a series of land cover data for the Upper Stoer, a sub-catchment of the river Elbe, as the input for a hydrological model. To derive the land cover data, we applied maximum-likelihood classifications of Landsat TM data for the years 2003 and 2010. The open source model suite SWAT (Soil Water Assessment Tool) was used to model the water cycle. SWAT has proven to be a useful tool for simulating the effect of watershed processes and management practices on water resources. A comparison of the modelled and observed discharge at the outlet of the catchment (gauge Willenscharen) showed good results (Nash Sutcliffe = 0.62). However, the land use change had no measurable effect on the discharge at the outlet due to the masking influence of high groundwater levels in the catchment. Therefore focusing on the discharge at the outlet is not a suitable approach in such cases. To represent the spatial characteristics of a catchment as realistically as possible, the catchment area must be spatially discretized. The configuration used primarily within SWAT is the sub-watershed discretization scheme. This results in a loss of spatial information, which is problematic for our intended applications. Therefore we developed an alternative

  17. Integrating geophysics and hydrology for reducing the uncertainty of groundwater model predictions and improved prediction performance

    DEFF Research Database (Denmark)

    Christensen, Nikolaj Kruse; Christensen, Steen; Ferre, Ty

    constructed from geological and hydrological data. However, geophysical data are increasingly used to inform hydrogeologic models because they are collected at lower cost and much higher density than geological and hydrological data. Despite increased use of geophysics, it is still unclear whether......, ‘true’, hydrogeological and geophysical systems. The two types of ‘true’ systems can be used together with corresponding forward codes to generate hydrological and geophysical datasets, respectively. These synthetic datasets can be interpreted using any hydrogeophysical inversion scheme...

  18. Parameterization of a Hydrological Model for a Large, Ungauged Urban Catchment

    OpenAIRE

    Gerald Krebs; Teemu Kokkonen; Heikki Setälä; Harri Koivusalo

    2016-01-01

    Urbanization leads to the replacement of natural areas by impervious surfaces and affects the catchment hydrological cycle with adverse environmental impacts. Low impact development tools (LID) that mimic hydrological processes of natural areas have been developed and applied to mitigate these impacts. Hydrological simulations are one possibility to evaluate the LID performance but the associated small-scale processes require a highly spatially distributed and explicit modeling approach. Howe...

  19. Improved Large-Scale Inundation Modelling by 1D-2D Coupling and Consideration of Hydrologic and Hydrodynamic Processes - a Case Study in the Amazon

    Science.gov (United States)

    Hoch, J. M.; Bierkens, M. F.; Van Beek, R.; Winsemius, H.; Haag, A.

    2015-12-01

    Understanding the dynamics of fluvial floods is paramount to accurate flood hazard and risk modeling. Currently, economic losses due to flooding constitute about one third of all damage resulting from natural hazards. Given future projections of climate change, the anticipated increase in the World's population and the associated implications, sound knowledge of flood hazard and related risk is crucial. Fluvial floods are cross-border phenomena that need to be addressed accordingly. Yet, only few studies model floods at the large-scale which is preferable to tiling the output of small-scale models. Most models cannot realistically model flood wave propagation due to a lack of either detailed channel and floodplain geometry or the absence of hydrologic processes. This study aims to develop a large-scale modeling tool that accounts for both hydrologic and hydrodynamic processes, to find and understand possible sources of errors and improvements and to assess how the added hydrodynamics affect flood wave propagation. Flood wave propagation is simulated by DELFT3D-FM (FM), a hydrodynamic model using a flexible mesh to schematize the study area. It is coupled to PCR-GLOBWB (PCR), a macro-scale hydrological model, that has its own simpler 1D routing scheme (DynRout) which has already been used for global inundation modeling and flood risk assessments (GLOFRIS; Winsemius et al., 2013). A number of model set-ups are compared and benchmarked for the simulation period 1986-1996: (0) PCR with DynRout; (1) using a FM 2D flexible mesh forced with PCR output and (2) as in (1) but discriminating between 1D channels and 2D floodplains, and, for comparison, (3) and (4) the same set-ups as (1) and (2) but forced with observed GRDC discharge values. Outputs are subsequently validated against observed GRDC data at Óbidos and flood extent maps from the Dartmouth Flood Observatory. The present research constitutes a first step into a globally applicable approach to fully couple

  20. Predicting hydrological signatures in ungauged catchments using spatial interpolation, index model, and rainfall-runoff modelling

    Science.gov (United States)

    Zhang, Yongqiang; Vaze, Jai; Chiew, Francis H. S.; Teng, Jin; Li, Ming

    2014-09-01

    Understanding a catchment's behaviours in terms of its underlying hydrological signatures is a fundamental task in surface water hydrology. It can help in water resource management, catchment classification, and prediction of runoff time series. This study investigated three approaches for predicting six hydrological signatures in southeastern Australia. These approaches were (1) spatial interpolation with three weighting schemes, (2) index model that estimates hydrological signatures using catchment characteristics, and (3) classical rainfall-runoff modelling. The six hydrological signatures fell into two categories: (1) long-term aggregated signatures - annual runoff coefficient, mean of log-transformed daily runoff, and zero flow ratio, and (2) signatures obtained from daily flow metrics - concavity index, seasonality ratio of runoff, and standard deviation of log-transformed daily flow. A total of 228 unregulated catchments were selected, with half the catchments randomly selected as gauged (or donors) for model building and the rest considered as ungauged (or receivers) to evaluate performance of the three approaches. The results showed that for two long-term aggregated signatures - the log-transformed daily runoff and runoff coefficient, the index model and rainfall-runoff modelling performed similarly, and were better than the spatial interpolation methods. For the zero flow ratio, the index model was best and the rainfall-runoff modelling performed worst. The other three signatures, derived from daily flow metrics and considered to be salient flow characteristics, were best predicted by the spatial interpolation methods of inverse distance weighting (IDW) and kriging. Comparison of flow duration curves predicted by the three approaches showed that the IDW method was best. The results found here provide guidelines for choosing the most appropriate approach for predicting hydrological behaviours at large scales.

  1. Forecasting the behaviour of complex landslides with a spatially distributed hydrological model

    Directory of Open Access Journals (Sweden)

    J.-P. Malet

    2005-01-01

    Full Text Available The relationships between rainfall, hydrology and landslide movement are often difficult to establish. In this context, ground-water flow analyses and dynamic modelling can help to clarify these complex relations, simulate the landslide hydrological behaviour in real or hypothetical situations, and help to forecast future scenarios based on environmental change. The primary objective of this study is to investigate the possibility of including more temporal and spatial information in landslide hydrology forecasting, by using a physically based spatially distributed model. Results of the hydrological and geomorphological investigation of the Super-Sauze earthflow, one of the persistently active landslide occurring in clay-rich material of the French Alps, are presented. Field surveys, continuous monitoring and interpretation of the data have shown that, in such material, the groundwater level fluctuates on a seasonal time scale, with a strong influence of the unsaturated zone. Therefore a coupled unsaturated/saturated model, incorporating Darcian saturated flow, fissure flow and meltwater flow is needed to adequately represent the landslide hydrology. The conceptual model is implemented in a 2.5-D spatially distributed hydrological model. The model is calibrated and validated on a multi-parameters database acquired on the site since 1997. The complex time-dependent and three-dimensional groundwater regime is well described, in both the short- and long-term. The hydrological model is used to forecast the future hydrological behaviour of the earthflow in response to potential environmental changes.

  2. Multi-model assessment of hydrologic impacts of climate change in a small Mediterranean basin

    Science.gov (United States)

    Perra, Enrica; Piras, Monica; Deidda, Roberto; Paniconi, Claudio; Mascaro, Giuseppe; Vivoni, Enrique R.; Cau, Pierluigi; Marras, Pier Andrea; Meyer, Swen; Ludwig, Ralf

    2017-04-01

    Assessing the hydrologic impacts of climate change is of great importance in the Mediterranean region, which is characterized by high precipitation variablitity and complex interactions within the water cycle. In this work we focus on the hydrological response of the Rio Mannu catchment, a small basin located in southern Sardinia (Italy) and characterized by a semi-arid climate. Specifically, we investigate inter-model variability and uncertainty by comparing the results of five distributed hydrologic models, namely CATchment HYdrology (CATHY), Soil and Water Assessment Tool (SWAT), TOPographic Kinematic APproximation and Integration eXtended (TOPKAPI-X), TIN-based Real time Integrated Basin Simulator (tRIBS), and WAter flow and balance SIMulation (WASIM), that differ greatly in their representation of terrain features, physical processes, and numerical complexity. The hydrological models were independently calibrated and validated on observed meteorological and hydrological time series, and then forced by the output of four combinations of global and regional climate models (properly bias-corrected and downscaled) in order to evaluate the effects of climate change for a reference (1971-2000) and a future (2041-2070) period. Notwithstanding their differences, the five hydrologic models responded similarly to the reduced precipitation and increased temperatures predicted by the climate models, and lend strong support to a future scenario of increased water shortages. The multi-model framework allows estimation of the uncertainty associated with these hydrologic simulations and this aspect will also be discussed.

  3. Simulating cold-region hydrology in an intensively drained agricultural watershed in Manitoba, Canada, using the Cold Regions Hydrological Model

    Science.gov (United States)

    Cordeiro, Marcos R. C.; Wilson, Henry F.; Vanrobaeys, Jason; Pomeroy, John W.; Fang, Xing; The Red-Assiniboine Project Biophysical Modelling Team

    2017-07-01

    Etrophication and flooding are perennial problems in agricultural watersheds of the northern Great Plains. A high proportion of annual runoff and nutrient transport occurs with snowmelt in this region. Extensive surface drainage modification, frozen soils, and frequent backwater or ice-damming impacts on flow measurement represent unique challenges to accurately modelling watershed-scale hydrological processes. A physically based, non-calibrated model created using the Cold Regions Hydrological Modelling platform (CRHM) was parameterized to simulate hydrological processes within a low slope, clay soil, and intensively surface drained agricultural watershed. These characteristics are common to most tributaries of the Red River of the north. Analysis of the observed water level records for the study watershed (La Salle River) indicates that ice cover and backwater issues at time of peak flow may impact the accuracy of both modelled and measured streamflows, highlighting the value of evaluating a non-calibrated model in this environment. Simulations best matched the streamflow record in years when peak and annual discharges were equal to or above the medians of 6.7 m3 s-1 and 1.25 × 107 m3, respectively, with an average Nash-Sutcliffe efficiency (NSE) of 0.76. Simulation of low-flow years (below the medians) was more challenging (average NSE stream discharge generation.

  4. Soil hydrologic characterization for modeling large scale soil remediation protocols

    Science.gov (United States)

    Romano, Nunzio; Palladino, Mario; Di Fiore, Paola; Sica, Benedetto; Speranza, Giuseppe

    2014-05-01

    In Campania Region (Italy), the Ministry of Environment identified a National Interest Priority Sites (NIPS) with a surface of about 200,000 ha, characterized by different levels and sources of pollution. This area, called Litorale Domitio-Agro Aversano includes some polluted agricultural land, belonging to more than 61 municipalities in the Naples and Caserta provinces. In this area, a high level spotted soil contamination is moreover due to the legal and outlaw industrial and municipal wastes dumping, with hazardous consequences also on the quality of the water table. The EU-Life+ project ECOREMED (Implementation of eco-compatible protocols for agricultural soil remediation in Litorale Domizio-Agro Aversano NIPS) has the major aim of defining an operating protocol for agriculture-based bioremediation of contaminated agricultural soils, also including the use of crops extracting pollutants to be used as biomasses for renewable energy production. In the framework of this project, soil hydrologic characterization plays a key role and modeling water flow and solute transport has two main challenging points on which we focus on. A first question is related to the fate of contaminants infiltrated from stormwater runoff and the potential for groundwater contamination. Another question is the quantification of fluxes and spatial extent of root water uptake by the plant species employed to extract pollutants in the uppermost soil horizons. Given the high variability of spatial distribution of pollutants, we use soil characterization at different scales, from field scale when facing root water uptake process, to regional scale when simulating interaction between soil hydrology and groundwater fluxes.

  5. Modelling Peatland Hydrology: Three cases from Northern Europe

    NARCIS (Netherlands)

    Querner, E.P.; Mioduszewski, W.; Povilaitis, A.; Slesicka, A.

    2010-01-01

    Many of the peatlands that used to extend over large parts of Northern Europe have been reclaimed for agriculture. Human influence continues to have a major impact on the hydrology of those that remain, affecting river flow and groundwater levels. In order to understand this hydrology it is necessar

  6. Modelling hydrological management for the restoration of acidified floating fens

    NARCIS (Netherlands)

    Dekker, S.C.; Barendregt, Arie; Bootsma, M.C.; Schot, P.P.

    2005-01-01

    Wetlands show a large decline in biodiversity. To protect and restore this biodiversity, many restoration projects are carried out. Hydrology in wetlands controls the chemical and biological processes and may be the most important factor regulating wetland function and development. Hydrological

  7. Hydrological model calibration for enhancing global flood forecast skill

    Science.gov (United States)

    Hirpa, Feyera A.; Beck, Hylke E.; Salamon, Peter; Thielen-del Pozo, Jutta

    2016-04-01

    Early warning systems play a key role in flood risk reduction, and their effectiveness is directly linked to streamflow forecast skill. The skill of a streamflow forecast is affected by several factors; among them are (i) model errors due to incomplete representation of physical processes and inaccurate parameterization, (ii) uncertainty in the model initial conditions, and (iii) errors in the meteorological forcing. In macro scale (continental or global) modeling, it is a common practice to use a priori parameter estimates over large river basins or wider regions, resulting in suboptimal streamflow estimations. The aim of this work is to improve flood forecast skill of the Global Flood Awareness System (GloFAS; www.globalfloods.eu), a grid-based forecasting system that produces flood forecast unto 30 days lead, through calibration of the distributed hydrological model parameters. We use a combination of in-situ and satellite-based streamflow data for automatic calibration using a multi-objective genetic algorithm. We will present the calibrated global parameter maps and report the forecast skill improvements achieved. Furthermore, we discuss current challenges and future opportunities with regard to global-scale early flood warning systems.

  8. Apply a hydrological model to estimate local temperature trends

    Science.gov (United States)

    Igarashi, Masao; Shinozawa, Tatsuya

    2014-03-01

    Continuous times series {f(x)} such as a depth of water is written f(x) = T(x)+P(x)+S(x)+C(x) in hydrological science where T(x),P(x),S(x) and C(x) are called the trend, periodic, stochastic and catastrophic components respectively. We simplify this model and apply it to the local temperature data such as given E. Halley (1693), the UK (1853-2010), Germany (1880-2010), Japan (1876-2010). We also apply the model to CO2 data. The model coefficients are evaluated by a symbolic computation by using a standard personal computer. The accuracy of obtained nonlinear curve is evaluated by the arithmetic mean of relative errors between the data and estimations. E. Halley estimated the temperature of Gresham College from 11/1692 to 11/1693. The simplified model shows that the temperature at the time rather cold compared with the recent of London. The UK and Germany data sets show that the maximum and minimum temperatures increased slowly from the 1890s to 1940s, increased rapidly from the 1940s to 1980s and have been decreasing since the 1980s with the exception of a few local stations. The trend of Japan is similar to these results.

  9. The TopoFlow Hydrologic Model: A New Community Project

    Science.gov (United States)

    Peckham, S. D.

    2004-05-01

    TopoFlow is a powerful, spatially-distributed hydrologic model with a user-friendly, wizard-style point-and-click interface. It is an open-source model that was designed to be easily modified and extended by a user community of hydrologists. Its main purpose is to model many different physical processes in a watershed with the goal of accurately predicting how various hydrologic variables will evolve in time in response to climatic forcings. The streamlined graphical interface makes it easy to perform multiple runs with different settings and different methods for parameterizing various physical processes; this makes it an excellent tool for research and teaching. Time evolutions for single pixels (such as hydrographs), collections of pixels, or entire grids (as animations) are all supported as output options. The currently supported physical processes are: Snowmelt (degree-day or energy balance method), Precipitation (uniform or varying in space/time), Evapotranspiration (Priestley-Taylor or energy balance), Infiltration (Green-Ampt coming soon), Channel/overland flow (Manning or law of wall) and Darcian, multi-layer subsurface flow. For each physical process, the user selects a "method" to be used to model that process from a droplist of options, and then specifies the input data that is required for that method and the output variables that are of interest. The ability to handle springs, sinks and canals was recently added. TopoFlow is designed so that users can use existing methods, share methods with others, or add their own methods and incorporate them into the graphical user interface. A method called "None" is always available to turn off any given physical process, and cleanly-written templates are provided to simplify the task of adding new methods. Input variables may be specified as a scalar (to be distributed uniformly), a time series, a spatial grid, or a grid seqence indexed by time. Many of the physical process methods used in TopoFlow are based on

  10. Hydrological daily rainfall-runoff simulation with BTOPMC model and comparison with Xin'anjiang model

    Institute of Scientific and Technical Information of China (English)

    Hong-jun BAO; Li-li WANG; Zhi-jia LI; Lin-na ZHAO; Guo-ping ZHANG

    2010-01-01

    A grid-based distributed hydrological model, the Block-wise use of TOPMODEL (BTOPMC), which was developed from the original TOPMODEL, was used for hydrological daily rainfall-runoff simulation. In the BTOPMC model, the runoff is explicitly calculated on a cell-by-cell basis, and the Muskingum-Cunge flow concentration method is used. In order to test the model's applicability, the BTOPMC model and the Xin'anjiang model were applied to the simulation of a humid watershed and a semi-humid to semi-arid watershed in China. The model parameters were optimized with the Shuffle Complex Evolution (SCE-UA) method. Results show that both models can effectively simulate the daily hydrograph in humid watersheds, but that the BTOPMC model performs poorly in semi-humid to semi-arid watersheds. The excess-infiltration mechanism should be incorporated into the BTOPMC model to broaden the model's applicability.

  11. Hydrologic Characterization for Spring Creek and Hydrologic Budget and Model Scenarios for Sheridan Lake, South Dakota, 1962-2007

    Science.gov (United States)

    Driscoll, Daniel G.; Norton, Parker A.

    2009-01-01

    The U.S. Geological Survey cooperated with South Dakota Game, Fish and Parks to characterize hydrologic information relevant to management of water resources associated with Sheridan Lake, which is formed by a dam on Spring Creek. This effort consisted primarily of characterization of hydrologic data for a base period of 1962 through 2006, development of a hydrologic budget for Sheridan Lake for this timeframe, and development of an associated model for simulation of storage deficits and drawdown in Sheridan Lake for hypothetical release scenarios from the lake. Historically, the dam has been operated primarily as a 'pass-through' system, in which unregulated outflows pass over the spillway; however, the dam recently was retrofitted with an improved control valve system that would allow controlled releases of about 7 cubic feet per second (ft3/s) or less from a fixed depth of about 60 feet (ft). Development of a hydrologic budget for Sheridan Lake involved compilation, estimation, and characterization of data sets for streamflow, precipitation, and evaporation. The most critical data need was for extrapolation of available short-term streamflow records for Spring Creek to be used as the long-term inflow to Sheridan Lake. Available short-term records for water years (WY) 1991-2004 for a gaging station upstream from Sheridan Lake were extrapolated to WY 1962-2006 on the basis of correlations with streamflow records for a downstream station and for stations located along two adjacent streams. Comparisons of data for the two streamflow-gaging stations along Spring Creek indicated that tributary inflow is approximately proportional to the intervening drainage area, which was used as a means of estimating tributary inflow for the hydrologic budget. Analysis of evaporation data shows that sustained daily rates may exceed maximum monthly rates by a factor of about two. A long-term (1962-2006) hydrologic budget was developed for computation of reservoir outflow from

  12. Modeling low impact development potential with hydrological response units.

    Science.gov (United States)

    Eric, Marija; Fan, Celia; Joksimovic, Darko; Li, James Y

    2013-01-01

    Evaluations of benefits of implementing low impact development (LID) stormwater management techniques can extend up to a watershed scale. This presents a challenge for representing them in watershed models, since they are typically orders of magnitude smaller in size. This paper presents an approach that is focused on trying to evaluate the benefits of implementing LIDs on a lot level. The methodology uses the concept of urban hydrological response Unit and results in developing and applying performance curves that are a function of lot properties to estimate the potential benefit of large-scale LID implementation. Lot properties are determined using a municipal geographic information system database and processed to determine groups of lots with similar properties. A representative lot from each group is modeled over a typical rainfall year using USEPA Stormwater Management Model to develop performance functions that relate the lot properties and the change in annual runoff volume and corresponding phosphorus loading with different LIDs implemented. The results of applying performance functions on all urban areas provide the potential locations, benefit and cost of implementation of all LID techniques, guiding future decisions for LID implementation by watershed area municipalities.

  13. Hydrologic model of the Modesto Region, California, 1960-2004

    Science.gov (United States)

    Phillips, Steven P.; Rewis, Diane L.; Traum, Jonathan A.

    2015-01-01

    Strategies for managing water supplies and groundwater quality in the Modesto region of the eastern San Joaquin Valley, California, are being formulated and evaluated by the Stanislaus and Tuolumne Rivers Groundwater Basin Association. Management issues and goals in the basin include an area in the lower part of the basin that requires drainage of the shallow water table to sustain agriculture, intra- and inter-basin migration of poor-quality groundwater, and efficient management of surface and groundwater supplies. To aid in the evaluation of water-management strategies, the U.S. Geological Survey and the Stanislaus and Tuolumne Rivers Groundwater Basin Association have developed a hydrologic model that simulates monthly groundwater and surface-water flow as governed by aquifer-system properties, annual and seasonal variations in climate, surface-water flow and availability, water use, and land use. The model was constructed by using the U.S. Geological Survey groundwater-modeling software MODFLOW-OWHM with the Farm Process.

  14. visCOS: An R-package to evaluate model performance of hydrological models

    Science.gov (United States)

    Klotz, Daniel; Herrnegger, Mathew; Wesemann, Johannes; Schulz, Karsten

    2016-04-01

    The evaluation of model performance is a central part of (hydrological) modelling. Much attention has been given to the development of evaluation criteria and diagnostic frameworks. (Klemeš, 1986; Gupta et al., 2008; among many others). Nevertheless, many applications exist for which objective functions do not yet provide satisfying summaries. Thus, the necessity to visualize results arises in order to explore a wider range of model capacities, be it strengths or deficiencies. Visualizations are usually devised for specific projects and these efforts are often not distributed to a broader community (e.g. via open source software packages). Hence, the opportunity to explicitly discuss a state-of-the-art presentation technique is often missed. We therefore present a comprehensive R-package for evaluating model performance by visualizing and exploring different aspects of hydrological time-series. The presented package comprises a set of useful plots and visualization methods, which complement existing packages, such as hydroGOF (Zambrano-Bigiarini et al., 2012). It is derived from practical applications of the hydrological models COSERO and COSEROreg (Kling et al., 2014). visCOS, providing an interface in R, represents an easy-to-use software package for visualizing and assessing model performance and can be implemented in the process of model calibration or model development. The package provides functions to load hydrological data into R, clean the data, process, visualize, explore and finally save the results in a consistent way. Together with an interactive zoom function of the time series, an online calculation of the objective functions for variable time-windows is included. Common hydrological objective functions, such as the Nash-Sutcliffe Efficiency and the Kling-Gupta Efficiency, can also be evaluated and visualized in different ways for defined sub-periods like hydrological years or seasonal sections. Many hydrologists use long-term water-balances as a

  15. The effect of uncertainty and systematic errors in hydrological modelling

    Science.gov (United States)

    Steinsland, I.; Engeland, K.; Johansen, S. S.; Øverleir-Petersen, A.; Kolberg, S. A.

    2014-12-01

    The aims of hydrological model identification and calibration are to find the best possible set of process parametrization and parameter values that transform inputs (e.g. precipitation and temperature) to outputs (e.g. streamflow). These models enable us to make predictions of streamflow. Several sources of uncertainties have the potential to hamper the possibility of a robust model calibration and identification. In order to grasp the interaction between model parameters, inputs and streamflow, it is important to account for both systematic and random errors in inputs (e.g. precipitation and temperatures) and streamflows. By random errors we mean errors that are independent from time step to time step whereas by systematic errors we mean errors that persists for a longer period. Both random and systematic errors are important in the observation and interpolation of precipitation and temperature inputs. Important random errors comes from the measurements themselves and from the network of gauges. Important systematic errors originate from the under-catch in precipitation gauges and from unknown spatial trends that are approximated in the interpolation. For streamflow observations, the water level recordings might give random errors whereas the rating curve contributes mainly with a systematic error. In this study we want to answer the question "What is the effect of random and systematic errors in inputs and observed streamflow on estimated model parameters and streamflow predictions?". To answer we test systematically the effect of including uncertainties in inputs and streamflow during model calibration and simulation in distributed HBV model operating on daily time steps for the Osali catchment in Norway. The case study is based on observations from, uncertainty carefullt quantified, and increased uncertainties and systmatical errors are done realistically by for example removing a precipitation gauge from the network.We find that the systematical errors in

  16. The benefits of daily data and scale up issues in hydrologic models-SWAT and CRAFT

    Science.gov (United States)

    Huang, Yumei; Quinn, Paul; Liang, Qiuhua; Adams, Russell

    2017-04-01

    When modelling the flow pathways for nutrient transport, the lack of good data and limitation of data resolution become the key cause of low quality output in various hydrologic models. The scale of catchment being studied would present the main issues of the sensitivity and uncertainty expected on the hydrologic modelling. Equally, the time step chosen is also important to nutrient dynamics. This study aims to evaluate the benefits of using both monthly and daily data in hydrologic models, and to address the issues of catchment scale when using the two hydrologic models, the Soil and Water Assessment Tool (SWAT), and Catchment Runoff Attenuation Flux Tool (CRAFT), by comparing the difference between SWAT and CRAFT in flow pathways and sediment transport. The models are different in terms of complexity, therefore the poster will discuss the strengths and weakness of the models. Also we can show the problems of calibration and how the models can be used to support catchment modelling.

  17. Impact of modellers' decisions on hydrological a priori predictions

    Science.gov (United States)

    Holländer, H. M.; Bormann, H.; Blume, T.; Buytaert, W.; Chirico, G. B.; Exbrayat, J.-F.; Gustafsson, D.; Hölzel, H.; Krauße, T.; Kraft, P.; Stoll, S.; Blöschl, G.; Flühler, H.

    2014-06-01

    In practice, the catchment hydrologist is often confronted with the task of predicting discharge without having the needed records for calibration. Here, we report the discharge predictions of 10 modellers - using the model of their choice - for the man-made Chicken Creek catchment (6 ha, northeast Germany, Gerwin et al., 2009b) and we analyse how well they improved their prediction in three steps based on adding information prior to each following step. The modellers predicted the catchment's hydrological response in its initial phase without having access to the observed records. They used conceptually different physically based models and their modelling experience differed largely. Hence, they encountered two problems: (i) to simulate discharge for an ungauged catchment and (ii) using models that were developed for catchments, which are not in a state of landscape transformation. The prediction exercise was organized in three steps: (1) for the first prediction the modellers received a basic data set describing the catchment to a degree somewhat more complete than usually available for a priori predictions of ungauged catchments; they did not obtain information on stream flow, soil moisture, nor groundwater response and had therefore to guess the initial conditions; (2) before the second prediction they inspected the catchment on-site and discussed their first prediction attempt; (3) for their third prediction they were offered additional data by charging them pro forma with the costs for obtaining this additional information. Holländer et al. (2009) discussed the range of predictions obtained in step (1). Here, we detail the modeller's assumptions and decisions in accounting for the various processes. We document the prediction progress as well as the learning process resulting from the availability of added information. For the second and third steps, the progress in prediction quality is evaluated in relation to individual modelling experience and costs of

  18. Integrating fire with hydrological projections: model evaluation to identify uncertainties and tradeoffs in model complexity

    Science.gov (United States)

    Kennedy, M.; McKenzie, D.

    2013-12-01

    It is imperative for resource managers to understand how a changing climate might modify future watershed and hydrological processes, and such an understanding is incomplete if disturbances such as fire are not integrated with hydrological projections. Can a robust fire spread model be developed that approximates patterns of fire spread in response to varying topography wind patterns, and fuel loads and moistures, without requiring intensive calibration to each new study area or time frame? We assessed the performance of a stochastic model of fire spread (WMFire), integrated with the Regional Hydro-Ecological Simulation System (RHESSys), for projecting the effects of climatic change on mountain watersheds. We first use Monte Carlo inference to determine that the fire spread model is able to replicate the spatial pattern of fire spread for a contemporary wildfire in Washington State (the Tripod fire), measured by the lacunarity and fractal dimension of the fire. We then integrate a version of WMFire able to replicate the contemporary wildfire with RHESSys and simulate a New Mexico watershed over the calibration period of RHESSys (1941-1997). In comparing the fire spread model to a single contemporary wildfire we found issues in parameter identifiability for several of the nine parameters, due to model input uncertainty and insensitivity of the mathematical function to certain ranges of the parameter values. Model input uncertainty is caused by the inherent difficulty in reconstructing fuel loads and fuel moistures for a fire event after the fire has occurred, as well as by issues in translating variables relevant to hydrological processes produced by the hydrological model to those known to affect fire spread and fire severity. The first stage in the model evaluation aided the improvement of the model in both of these regards. In transporting the model to a new landscape in order to evaluate fire regimes in addition to patterns of fire spread, we find reasonable

  19. Concepts of Information Content and Likelihood in Parameter Calibration for Hydrological Simulation Models

    Science.gov (United States)

    Beven, Keith; Smith, Paul

    2013-04-01

    There remains a great deal of uncertainty about uncertainty estimation in hydrological modelling. Given that hydrology is still a subject limited by the available measurement techniques, it does not appear that the issue of epistemic error in hydrological data will go away for the foreseeable future and it may be necessary to find a way of allowing for robust model conditioning and more subjective treatments of potential epistemic errors in prediction. This paper attempts to analyse how the results of the epistemic uncertainties inherent in the hydrological modelling process impact on model conditioning, hypothesis testing and forecasting. We propose an assessment of the information in hydrological data used for calibration based upon hydrological reasoning. This is performed prior to the assessment of any of the proposed hydrological models. It can then inform the evaluation of competing models and resulting prediction uncertainties. An illustration of how this information assessment might influence model conditioning is provided by an application; the rainfall-runoff modelling of a catchment in Northern England where inconsistent data for some events can introduce disinformation into the model conditioning process. The construction of the resulting prediction uncertainties is also considered.

  20. On the Concepts of Information Content and Likelihood in Parameter Calibration for Hydrological Simulation Models (Invited)

    Science.gov (United States)

    Smith, P. J.; Beven, K.

    2013-12-01

    There remains a great deal of uncertainty about appropriate uncertainty estimation in hydrological modelling. Given that hydrology is still a subject limited by the available measurement techniques; and we cannot go back in time to take better observations of the past; the issue of epistemic error in hydrological data will not go away for the foreseeable future. It is therefore necessary to find a way of allowing for robust model conditioning and more subjective treatments of potential epistemic errors in prediction. This paper offers an analysis of how the epistemic uncertainties inherent in the hydrological modelling process impact on model conditioning, hypothesis testing and forecasting. We propose an assessment of the information in hydrological data used for calibration based upon hydrological reasoning and prior to the assessment of any of the proposed hydrological models. This can then inform the evaluation of competing models and resulting prediction uncertainties. An illustration of how this information assessment might influence model conditioning is provided by an application; the rainfall-runoff modelling of a catchment in Northern England where inconsistent data for some events can introduce disinformation into the model conditioning process. The construction of the resulting prediction uncertainties is also considered.

  1. Modular modeling system for building distributed hydrologic models with a user-friendly software package

    Science.gov (United States)

    Wi, S.; Ray, P. A.; Brown, C.

    2015-12-01

    A software package developed to facilitate building distributed hydrologic models in a modular modeling system is presented. The software package provides a user-friendly graphical user interface that eases its practical use in water resources-related research and practice. The modular modeling system organizes the options available to users when assembling models according to the stages of hydrological cycle, such as potential evapotranspiration, soil moisture accounting, and snow/glacier melting processes. The software is intended to be a comprehensive tool that simplifies the task of developing, calibrating, validating, and using hydrologic models through the inclusion of intelligent automation to minimize user effort, and reduce opportunities for error. Processes so far automated include the definition of system boundaries (i.e., watershed delineation), climate and geographical input generation, and parameter calibration. Built-in post-processing toolkits greatly improve the functionality of the software as a decision support tool for water resources system management and planning. Example post-processing toolkits enable streamflow simulation at ungauged sites with predefined model parameters, and perform climate change risk assessment by means of the decision scaling approach. The software is validated through application to watersheds representing a variety of hydrologic regimes.

  2. Statistical procedures for evaluating daily and monthly hydrologic model predictions

    Science.gov (United States)

    Coffey, M.E.; Workman, S.R.; Taraba, J.L.; Fogle, A.W.

    2004-01-01

    The overall study objective was to evaluate the applicability of different qualitative and quantitative methods for comparing daily and monthly SWAT computer model hydrologic streamflow predictions to observed data, and to recommend statistical methods for use in future model evaluations. Statistical methods were tested using daily streamflows and monthly equivalent runoff depths. The statistical techniques included linear regression, Nash-Sutcliffe efficiency, nonparametric tests, t-test, objective functions, autocorrelation, and cross-correlation. None of the methods specifically applied to the non-normal distribution and dependence between data points for the daily predicted and observed data. Of the tested methods, median objective functions, sign test, autocorrelation, and cross-correlation were most applicable for the daily data. The robust coefficient of determination (CD*) and robust modeling efficiency (EF*) objective functions were the preferred methods for daily model results due to the ease of comparing these values with a fixed ideal reference value of one. Predicted and observed monthly totals were more normally distributed, and there was less dependence between individual monthly totals than was observed for the corresponding predicted and observed daily values. More statistical methods were available for comparing SWAT model-predicted and observed monthly totals. The 1995 monthly SWAT model predictions and observed data had a regression Rr2 of 0.70, a Nash-Sutcliffe efficiency of 0.41, and the t-test failed to reject the equal data means hypothesis. The Nash-Sutcliffe coefficient and the R r2 coefficient were the preferred methods for monthly results due to the ability to compare these coefficients to a set ideal value of one.

  3. Lumped conceptual hydrological model for Purna river basin, India

    Indian Academy of Sciences (India)

    V D Loliyana; P L Patel

    2015-12-01

    In present study, a lumped conceptual hydrological model, NAM (MIKE11), is calibrated while optimizing the runoff simulations on the basis of minimization of percentage water balance (% WBL) and root mean square error (RMSE) using measured stream flow data of eight years from 1991 to 1998 for Yerli catchment (area = 15,701 km2) of upper Tapi basin, Maharashtra in Western India. The sensitivity of runoff volume and peak-runoff has been undertaken with reference to nine NAM parameters using the data of calibration period. The runoff volume and peak-runoff have been found to be highly sensitive with reference to maximum water content in root zone storage (Lmax) and overland flow coefficient (CQOF) respectively. On the other hand, runoff volume is found to be moderately sensitive with maximum water content in surface storage (Umax). The calibrated model has been validated for independent stream flow data of Yerli gauging site for years 2001–2004, and Gopalkheda gauging site for years 1991–1998 and 2001–2004. The model performance has been assessed using statistical performance indices, and compared the same with their yardsticks suggested in published literature. The simulated results demonstrated that calibrated model is able to simulate hydrographs satisfactorily for Yerli (NSE = 0.86–0.88, r = 0.93–0.96, EI = 1.05–1.12) as well as Gopalkheda subcatchments (NSE = 0.76–0.92 and r = 0.88–0.96, EI = 0.89–0.91) at monthly time scale. The model also performs reasonably well in simulating the annual hydrographs at daily time scale. The calibrated model may be useful in prediction of water yield and flooding conditions in the Purna catchment.

  4. A seawater desalination scheme for global hydrological models

    Science.gov (United States)

    Hanasaki, Naota; Yoshikawa, Sayaka; Kakinuma, Kaoru; Kanae, Shinjiro

    2016-10-01

    Seawater desalination is a practical technology for providing fresh water to coastal arid regions. Indeed, the use of desalination is rapidly increasing due to growing water demand in these areas and decreases in production costs due to technological advances. In this study, we developed a model to estimate the areas where seawater desalination is likely to be used as a major water source and the likely volume of production. The model was designed to be incorporated into global hydrological models (GHMs) that explicitly include human water usage. The model requires spatially detailed information on climate, income levels, and industrial and municipal water use, which represent standard input/output data in GHMs. The model was applied to a specific historical year (2005) and showed fairly good reproduction of the present geographical distribution and national production of desalinated water in the world. The model was applied globally to two periods in the future (2011-2040 and 2041-2070) under three distinct socioeconomic conditions, i.e., SSP (shared socioeconomic pathway) 1, SSP2, and SSP3. The results indicate that the usage of seawater desalination will have expanded considerably in geographical extent, and that production will have increased by 1.4-2.1-fold in 2011-2040 compared to the present (from 2.8 × 109 m3 yr-1 in 2005 to 4.0-6.0 × 109 m3 yr-1), and 6.7-17.3-fold in 2041-2070 (from 18.7 to 48.6 × 109 m3 yr-1). The estimated global costs for production for each period are USD 1.1-10.6 × 109 (0.002-0.019 % of the total global GDP), USD 1.6-22.8 × 109 (0.001-0.020 %), and USD 7.5-183.9 × 109 (0.002-0.100 %), respectively. The large spreads in these projections are primarily attributable to variations within the socioeconomic scenarios.

  5. Hydrologic modeling using elevationally adjusted NARR and NARCCAP regional climate-model simulations: Tucannon River, Washington

    Science.gov (United States)

    Praskievicz, Sarah; Bartlein, Patrick

    2014-09-01

    An emerging approach to downscaling the projections from General Circulation Models (GCMs) to scales relevant for basin hydrology is to use output of GCMs to force higher-resolution Regional Climate Models (RCMs). With spatial resolution often in the tens of kilometers, however, even RCM output will likely fail to resolve local topography that may be climatically significant in high-relief basins. Here we develop and apply an approach for downscaling RCM output using local topographic lapse rates (empirically-estimated spatially and seasonally variable changes in climate variables with elevation). We calculate monthly local topographic lapse rates from the 800-m Parameter-elevation Regressions on Independent Slopes Model (PRISM) dataset, which is based on regressions of observed climate against topographic variables. We then use these lapse rates to elevationally correct two sources of regional climate-model output: (1) the North American Regional Reanalysis (NARR), a retrospective dataset produced from a regional forecasting model constrained by observations, and (2) a range of baseline climate scenarios from the North American Regional Climate Change Assessment Program (NARCCAP), which is produced by a series of RCMs driven by GCMs. By running a calibrated and validated hydrologic model, the Soil and Water Assessment Tool (SWAT), using observed station data and elevationally-adjusted NARR and NARCCAP output, we are able to estimate the sensitivity of hydrologic modeling to the source of the input climate data. Topographic correction of regional climate-model data is a promising method for modeling the hydrology of mountainous basins for which no weather station datasets are available or for simulating hydrology under past or future climates.

  6. An Open Source modular platform for hydrological model implementation

    Science.gov (United States)

    Kolberg, Sjur; Bruland, Oddbjørn

    2010-05-01

    An implementation framework for setup and evaluation of spatio-temporal models is developed, forming a highly modularized distributed model system. The ENKI framework allows building space-time models for hydrological or other environmental purposes, from a suite of separately compiled subroutine modules. The approach makes it easy for students, researchers and other model developers to implement, exchange, and test single routines in a fixed framework. The open-source license and modular design of ENKI will also facilitate rapid dissemination of new methods to institutions engaged in operational hydropower forecasting or other water resource management. Written in C++, ENKI uses a plug-in structure to build a complete model from separately compiled subroutine implementations. These modules contain very little code apart from the core process simulation, and are compiled as dynamic-link libraries (dll). A narrow interface allows the main executable to recognise the number and type of the different variables in each routine. The framework then exposes these variables to the user within the proper context, ensuring that time series exist for input variables, initialisation for states, GIS data sets for static map data, manually or automatically calibrated values for parameters etc. ENKI is designed to meet three different levels of involvement in model construction: • Model application: Running and evaluating a given model. Regional calibration against arbitrary data using a rich suite of objective functions, including likelihood and Bayesian estimation. Uncertainty analysis directed towards input or parameter uncertainty. o Need not: Know the model's composition of subroutines, or the internal variables in the model, or the creation of method modules. • Model analysis: Link together different process methods, including parallel setup of alternative methods for solving the same task. Investigate the effect of different spatial discretization schemes. o Need not

  7. Climate change impact on available water resources obtained using multiple global climate and hydrology models

    NARCIS (Netherlands)

    Hagemann, S.; Chen, Cui; Clark, D.B.; Folwell, S.; Gosling, S.; Haddeland, I.; Hanasaki, N.; Heinke, J.; Ludwig, F.

    2013-01-01

    Climate change is expected to alter the hydrological cycle resulting in large-scale impacts on water availability. However, future climate change impact assessments are highly uncertain. For the first time, multiple global climate (three) and hydrological 5 models (eight) were used to systematically

  8. SIMGRO, a GIS-Supported Regional Hydrologic Model in Irrigated Areas : Case study in Mendoza, Argentina

    NARCIS (Netherlands)

    Querner, E.P.; Morabito, J.A.; Tozzi, D.A.

    2008-01-01

    The SIMGRO hydrologic simulation model was extended to include irrigation practice. It could then be used to evaluate the effect of hydrologic changes in an irrigated area in the province of Mendoza, Argentina where, given an average annual rainfall of approximately 200mm , irrigation is crucial for

  9. Flexibility on storage-release based distributed hydrologic modeling with object-oriented approach

    Science.gov (United States)

    With the availability of advanced hydrologic data in the public domain such as remotely sensed and climate change scenario data, there is a need for a modeling framework that is capable of using these data to simulate and extend hydrologic processes with multidisciplinary approaches for sustainable ...

  10. Representing northern peatland microtopography and hydrology within the Community Land Model

    Science.gov (United States)

    X. Shi; P.E. Thornton; D.M. Ricciuto; P J. Hanson; J. Mao; Stephen Sebestyen; N.A. Griffiths; G. Bisht

    2015-01-01

    Predictive understanding of northern peatland hydrology is a necessary precursor to understanding the fate of massive carbon stores in these systems under the influence of present and future climate change. Current models have begun to address microtopographic controls on peatland hydrology, but none have included a prognostic calculation of peatland water table depth...

  11. The Effect of Modeling and Visualization Resources on Student Understanding of Physical Hydrology

    Science.gov (United States)

    Marshall, Jilll A.; Castillo, Adam J.; Cardenas, M. Bayani

    2015-01-01

    We investigated the effect of modeling and visualization resources on upper-division, undergraduate and graduate students' performance on an open-ended assessment of their understanding of physical hydrology. The students were enrolled in one of five sections of a physical hydrology course. In two of the sections, students completed homework…

  12. The Effect of Modeling and Visualization Resources on Student Understanding of Physical Hydrology

    Science.gov (United States)

    Marshall, Jilll A.; Castillo, Adam J.; Cardenas, M. Bayani

    2015-01-01

    We investigated the effect of modeling and visualization resources on upper-division, undergraduate and graduate students' performance on an open-ended assessment of their understanding of physical hydrology. The students were enrolled in one of five sections of a physical hydrology course. In two of the sections, students completed homework…

  13. On noice in data assimilation schemes for improved flood forecasting using distributed hydrological models

    NARCIS (Netherlands)

    Noh, S.J.; Rakovec, O.; Weerts, A.H.; Tachikawa, Y.

    2014-01-01

    We investigate the effects of noise specification on the quality of hydrological forecasts via an advanced data assimilation (DA) procedure using a distributed hydrological model driven by numerical weather predictions. The sequential DA procedure is based on (1) a multivariate rainfall ensemble

  14. Climate change impact on available water resources obtained using multiple global climate and hydrology models

    NARCIS (Netherlands)

    Hagemann, S.; Chen, Cui; Clark, D.B.; Folwell, S.; Gosling, S.; Haddeland, I.; Hanasaki, N.; Heinke, J.; Ludwig, F.

    2013-01-01

    Climate change is expected to alter the hydrological cycle resulting in large-scale impacts on water availability. However, future climate change impact assessments are highly uncertain. For the first time, multiple global climate (three) and hydrological 5 models (eight) were used to systematically

  15. Modelling of green roofs' hydrologic performance using EPA's SWMM.

    Science.gov (United States)

    Burszta-Adamiak, E; Mrowiec, M

    2013-01-01

    Green roofs significantly affect the increase in water retention and thus the management of rain water in urban areas. In Poland, as in many other European countries, excess rainwater resulting from snowmelt and heavy rainfall contributes to the development of local flooding in urban areas. Opportunities to reduce surface runoff and reduce flood risks are among the reasons why green roofs are more likely to be used also in this country. However, there are relatively few data on their in situ performance. In this study the storm water performance was simulated for the green roofs experimental plots using the Storm Water Management Model (SWMM) with Low Impact Development (LID) Controls module (version 5.0.022). The model consists of many parameters for a particular layer of green roofs but simulation results were unsatisfactory considering the hydrologic response of the green roofs. For the majority of the tested rain events, the Nash coefficient had negative values. It indicates a weak fit between observed and measured flow-rates. Therefore complexity of the LID module does not affect the increase of its accuracy. Further research at a technical scale is needed to determine the role of the green roof slope, vegetation cover and drying process during the inter-event periods.

  16. Test and Sensitivity Analysis of Hydrological Modeling in the Coupled WRF-Urban Modeling System

    Science.gov (United States)

    Wang, Z.; yang, J.

    2013-12-01

    Rapid urbanization has emerged as the source of many adverse effects that challenge the environmental sustainability of cities under changing climatic patterns. One essential key to address these challenges is to physically resolve the dynamics of urban-land-atmospheric interactions. To investigate the impact of urbanization on regional climate, physically-based single layer urban canopy model (SLUCM) has been developed and implemented into the Weather Research and Forecasting (WRF) platform. However, due to the lack of realistic representation of urban hydrological processes, simulation of urban climatology by current coupled WRF-SLUCM is inevitably inadequate. Aiming at improving the accuracy of simulations, recently we implemented urban hydrological processes into the model, including (1) anthropogenic latent heat, (2) urban irrigation, (3) evaporation over impervious surface, and (4) urban oasis effect. In addition, we couple the green roof system into the model to verify its capacity in alleviating urban heat island effect at regional scale. Driven by different meteorological forcings, offline tests show that the enhanced model is more accurate in predicting turbulent fluxes arising from built terrains. Though the coupled WRF-SLUCM has been extensively tested against various field measurement datasets, accurate input parameter space needs to be specified for good model performance. As realistic measurements of all input parameters to the modeling framework are rarely possible, understanding the model sensitivity to individual parameters is essential to determine the relative importance of parameter uncertainty to model performance. Thus we further use an advanced Monte Carlo approach to quantify relative sensitivity of input parameters of the hydrological model. In particular, performance of two widely used soil hydraulic models, namely the van Genuchten model (based on generic soil physics) and an empirical model (viz. the CHC model currently adopted in WRF

  17. Evapotranspiration and irrigation algorithms in hydrologic modeling:Present Status and Opportunities

    Science.gov (United States)

    Hydrologic models are used extensively for predicting water availability and water quality responses to alternative irrigation, tillage, crop, and fertilizer management practices and global climate change. Modeling results have been frequently used by regulatory agencies for developing remedial meas...

  18. Improved treatment of uncertainty in hydrologic modelling: combining the strengths of global optimisation and data assimilation

    NARCIS (Netherlands)

    Vrugt, J.A.; Diks, C.G.H.; Gupta, H.V.; Bouten, W.; Verstraten, J.M.

    2005-01-01

    Hydrologic models use relatively simple mathematical equations to conceptualize and aggregate the complex, spatially distributed, and highly interrelated water, energy, and vegetation processes in a watershed. A consequence of process aggregation is that the model parameters often do not represent

  19. Grid cells used for Surface-Water Network for the Central Valley Hydrologic Model

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the segment and reaches for the surface-water network by model cell for the Central Valley Hydrologic Model (CVHM). The Central Valley...

  20. Development of distributed time-variant gain model for nonlinear hydrological systems

    Institute of Scientific and Technical Information of China (English)

    XIA; Jun; WANG; Gangsheng; TAN; Ge; YE; Aizhong; G.; H.; Hua

    2005-01-01

    In this paper, a rainfall-runoff modeling system is developed based on a nonlinear Volterra functional series and a hydrological conceptual modeling approach. Two models, i.e. the time-variant gain model (TVGM) and the distributed time-variant gain model (DTVGM) that are built on the platform of Digital Elevation Model (DEM), Remote Sensing (RS) and Unit Hydrological Process were proposed. The developed DTVGM model was applied to two cases in the Heihe River Basin that is located in the arid and semiarid region of northwestern China and the Chaobai River basin located in the semihumid region of northern China. The results indicate that, in addition to the classic dynamic differential approach to describe nonlinear processes in hydrological systems, it is possible to study such complex processes through the proposed systematic approach to identify prominent hydrological relations. The DTVGM, coupling the advantages of both nonlinear and distributed hydrological models, can simulate variant hydrological processes under different environment conditions. Satisfactory results were obtained in forecasting the time-space variations of hydrological processes and the relationships between land use/cover change and surface runoff variation.

  1. airGR: an R-package suitable for large sample hydrology presenting a suite of lumped hydrological models

    Science.gov (United States)

    Thirel, G.; Delaigue, O.; Coron, L.; Perrin, C.; Andreassian, V.

    2016-12-01

    Lumped hydrological models are useful and convenient tools for research, engineering and educational purposes. They propose catchment-scale representations of the precipitation-discharge relationship. Thanks to their limited data requirements, they can be easily implemented and run. With such models, it is possible to simulate a number of hydrological key processes over the catchment with limited structural and parametric complexity, typically evapotranspiration, runoff, underground losses, etc. The Hydrology Group at Irstea (Antony) has been developing a suite of rainfall-runoff models over the past 30 years with the main objectives of designing models as efficient as possible in terms of streamflow simulation, applicable to a wide range of catchments and having low data requirements. This resulted in a suite of models running at different time steps (from hourly to annual) applicable for various issues including water balance estimation, forecasting, simulation of impacts and scenario testing. Recently, Irstea has developed an easy-to-use R-package (R Core Team, 2015; Coron et al., 2016), called airGR, to make these models widely available. It includes: - the water balance annual GR1A (Mouehli et al., 2006), - the monthly GR2M (Mouehli, 2003) models, - three versions of the daily model, namely GR4J (Perrin et al., 2003), GR5J (Le Moine, 2008) and GR6J (Pushpalatha et al., 2011), - the hourly GR4H model (Mathevet, 2005), - a degree-day snow module CemaNeige (Valéry et al., 2014). The airGR package has been designed to facilitate the use by non-expert users and allow the addition of evaluation criteria, models or calibration algorithm selected by the end-user. Each model core is coded in FORTRAN to ensure low computational time. The other package functions (i.e. mainly the calibration algorithm and the efficiency criteria) are coded in R. The package is already used for educational purposes. It allows for convenient implementation of model inter-comparisons and

  2. HESS Opinions "Crash tests for a standardized evaluation of hydrological models"

    Directory of Open Access Journals (Sweden)

    A. Valéry

    2009-10-01

    Full Text Available As all hydrological models are intrinsically limited hypotheses on the behaviour of catchments, models – which attempt to represent real-world behaviour – will always remain imperfect. To make progress on the long road towards improved models, we need demanding tests, i.e. true crash tests. Efficient testing requires large and varied data sets to develop and assess hydrological models, to ensure their generality, to diagnose their failures, and ultimately, help improving them.

  3. On Model Complexity and Parameter Regionalization for Continental Scale Hydrologic Simulations

    Science.gov (United States)

    Rakovec, O.; Mizukami, N.; Newman, A. J.; Thober, S.; Kumar, R.; Wood, A.; Clark, M. P.; Samaniego, L. E.

    2016-12-01

    Assessing hydrologic model complexity and performing continental-domain model simulations has become an important objective in contemporary hydrology. We present a large-sample hydrologic modeling study to better understand (1) the benefits of parameter regionalization schemes, (2) the effects of spatially distributed/lumped model structures, and (3) the importance of selected hydrological processes on model performance. Four hydrological/land surface models (mHM, SAC, VIC, Noah-MP) are set up for 500 small to medium-sized unimpaired basins over the contiguous United States for two spatial scales: lumped and 12km grid. We performed model calibration at individual basins with and without parameter regionalization. For parameter regionalization, we use the well-established Multiscale Parameter Regionalization (MPR) technique, with the specific goal of assessing the transferability of model parameters across different time periods (from calibration to validation period), spatial scales (lumped basin scale to distributed) and locations, for different models. Our results reveal that large inter-model differences are dominated by the choice of model specific hydrological processes (in particular snow and soil moisture) over the choice of spatial discretization and/or parameter regionalization schemes. Nevertheless, parameter regionalization is crucial for parameter transferability across scale and to un-gauged locations. Last but not least, we observe that calibration of model parameters cannot always compensate for the choice of model structure.

  4. Hydrological extremes in China during 1971-2000: from observations and models

    Science.gov (United States)

    Liu, Xingcai; He, Jun; Mu, Mengfei; Tang, Qiuhong

    2016-04-01

    Hydrological cycle in China has been greatly affected by both significant climate change and human disturbance since the 1970s. The ISI-MIP2 project provides such a framework by involving multiple hydrological models to reproduce the global hydrological cycle considering both climate change and human impacts. However, the multimodel simulations yet need validation at regional applications. In this study, we evaluate the multimodel simulations of river flow using monthly observations from about 300 hydrological stations in China during the 1970-2000 period. The Nash-Sutcliffe (NS) coefficient and mean relative errors (MRE) are computed for each station to measure the performance of multimodel simulations. Trends in river flow are also compared for observations and simulations. On the basis of overall comparison, we evaluate the hydrological extremes derived from observations and simulations. The hydrological extremes are identified using a standardized discharge index (SDI), which resembles the standardized precipitation index (SPI), based on monthly river flow. The performance of multimodel simulations in reproducing hydrological extremes shows regional difference, and which seems to be greatly associated with the intensity of human activities in the basins. The uncertainty in multimodel simulations may be from models and input data. The uncertainties from both the hydrological models and forcings are investigated, and uncertainty from human impact related input (irrigated area and reservoir storage) is discussed with respect to reported data in China.

  5. Does model performance improve with complexity? A case study with three hydrological models

    Science.gov (United States)

    Orth, Rene; Staudinger, Maria; Seneviratne, Sonia I.; Seibert, Jan; Zappa, Massimiliano

    2015-04-01

    In recent decades considerable progress has been made in climate model development. Following the massive increase in computational power, models became more sophisticated. At the same time also simple conceptual models have advanced. In this study we validate and compare three hydrological models of different complexity to investigate whether their performance varies accordingly. For this purpose we use runoff and also soil moisture measurements, which allow a truly independent validation, from several sites across Switzerland. The models are calibrated in similar ways with the same runoff data. Our results show that the more complex models HBV and PREVAH outperform the simple water balance model (SWBM) in case of runoff but not for soil moisture. Furthermore the most sophisticated PREVAH model shows an added value compared to the HBV model only in case of soil moisture. Focusing on extreme events we find generally improved performance of the SWBM during drought conditions and degraded agreement with observations during wet extremes. For the more complex models we find the opposite behavior, probably because they were primarily developed for prediction of runoff extremes. As expected given their complexity, HBV and PREVAH have more problems with over-fitting. All models show a tendency towards better performance in lower altitudes as opposed to (pre-) alpine sites. The results vary considerably across the investigated sites. In contrast, the different metrics we consider to estimate the agreement between models and observations lead to similar conclusions, indicating that the performance of the considered models is similar at different time scales as well as for anomalies and long-term means. We conclude that added complexity does not necessarily lead to improved performance of hydrological models, and that performance can vary greatly depending on the considered hydrological variable (e.g. runoff vs. soil moisture) or hydrological conditions (floods vs. droughts).

  6. Hydrological Modeling Reproducibility Through Data Management and Adaptors for Model Interoperability

    Science.gov (United States)

    Turner, M. A.

    2015-12-01

    Because of a lack of centralized planning and no widely-adopted standards among hydrological modeling research groups, research communities, and the data management teams meant to support research, there is chaos when it comes to data formats, spatio-temporal resolutions, ontologies, and data availability. All this makes true scientific reproducibility and collaborative integrated modeling impossible without some glue to piece it all together. Our Virtual Watershed Integrated Modeling System provides the tools and modeling framework hydrologists need to accelerate and fortify new scientific investigations by tracking provenance and providing adaptors for integrated, collaborative hydrologic modeling and data management. Under global warming trends where water resources are under increasing stress, reproducible hydrological modeling will be increasingly important to improve transparency and understanding of the scientific facts revealed through modeling. The Virtual Watershed Data Engine is capable of ingesting a wide variety of heterogeneous model inputs, outputs, model configurations, and metadata. We will demonstrate one example, starting from real-time raw weather station data packaged with station metadata. Our integrated modeling system will then create gridded input data via geostatistical methods along with error and uncertainty estimates. These gridded data are then used as input to hydrological models, all of which are available as web services wherever feasible. Models may be integrated in a data-centric way where the outputs too are tracked and used as inputs to "downstream" models. This work is part of an ongoing collaborative Tri-state (New Mexico, Nevada, Idaho) NSF EPSCoR Project, WC-WAVE, comprised of researchers from multiple universities in each of the three states. The tools produced and presented here have been developed collaboratively alongside watershed scientists to address specific modeling problems with an eye on the bigger picture of

  7. Model structural uncertainty quantification and hydrologic parameter and prediction error analysis using airborne electromagnetic data

    DEFF Research Database (Denmark)

    Minsley, B. J.; Christensen, Nikolaj Kruse; Christensen, Steen

    Model structure, or the spatial arrangement of subsurface lithological units, is fundamental to the hydrological behavior of Earth systems. Knowledge of geological model structure is critically important in order to make informed hydrological predictions and management decisions. Model structure...... indicator simulation, we produce many realizations of model structure that are consistent with observed datasets and prior knowledge. Given estimates of model structural uncertainty, we incorporate hydrologic observations to evaluate the errors in hydrologic parameter or prediction errors that occur when...... is never perfectly known, however, and incorrect assumptions can be a significant source of error when making model predictions. We describe a systematic approach for quantifying model structural uncertainty that is based on the integration of sparse borehole observations and large-scale airborne...

  8. A remote sensing driven distributed hydrological model of the Senegal River basin

    DEFF Research Database (Denmark)

    Stisen, Simon; Jensen, Karsten Høgh; Sandholt, Inge

    2008-01-01

    Distributed hydrological models require extensive data amounts for driving the models and for parameterization of the land surface and subsurface. This study investigates the potential of applying remote sensing (RS) based input data in a hydrological model for the 350,000 km2 Senegal River basin...... the geostationary METEOSAT-7 and the polar orbiting advanced very high resolution radiometer (AVHRR) sensors using well documented techniques. The distributed hydrological model MIKE SHE was calibrated and validated against observed discharge for six individual subcatchments during the period 1998-2005. The model...... outputs of AET from both model setups was carried out. This revealed substantial differences in the spatial patterns of AET for the examined subcatchment, in spite of similar values of predicted discharge and average AET. The potential for driving large scale hydrological models using remote sensing data...

  9. Rapid Prototyping of Hydrologic Model Interfaces with IPython

    Science.gov (United States)

    Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

    2014-12-01

    A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near

  10. Integrated hydrologic modeling: Effects of spatial scale, discretization and initialization

    Science.gov (United States)

    Seck, A.; Welty, C.; Maxwell, R. M.

    2011-12-01

    Groundwater discharge contributes significantly to the annual flows of Chesapeake Bay tributaries and is presumed to contribute to the observed lag time between the implementation of management actions and the environmental response in the Chesapeake Bay. To investigate groundwater fluxes and flow paths and interaction with surface flow, we have developed a fully distributed integrated hydrologic model of the Chesapeake Bay Watershed using ParFlow. Here we present a comparison of model spatial resolution and initialization methods. We have studied the effect of horizontal discretization on overland flow processes at a range of scales. Three nested model domains have been considered: the Monocacy watershed (5600 sq. km), the Potomac watershed (92000 sq. km) and the Chesapeake Bay watershed (400,000 sq. km). Models with homogeneous subsurface and topographically-derived slopes were evaluated at 500-m, 1000-m, 2000-m, and 4000-m grid resolutions. Land surface slopes were derived from resampled DEMs and corrected using stream networks. Simulation results show that the overland flow processes are reasonably well represented with a resolution up to 2000 m. We observe that the effects of horizontal resolution dissipate with larger scale models. Using a homogeneous model that includes subsurface and surface terrain characteristics, we have evaluated various initialization methods for the integrated Monocacy watershed model. This model used several options for water table depths and two rainfall forcing methods including (1) a synthetic rainfall-recession cycle corresponding to the region's average annual rainfall rate, and (2) an initial shut-off of rainfall forcing followed by a rainfall-recession cycling. Results show the dominance of groundwater generated runoff during a first phase of the simulation followed by a convergence towards more balanced runoff generation mechanisms. We observe that the influence of groundwater runoff increases in dissected relief areas

  11. Bayesian Hierarchical Modeling for Big Data Fusion in Soil Hydrology

    Science.gov (United States)

    Mohanty, B.; Kathuria, D.; Katzfuss, M.

    2016-12-01

    Soil moisture datasets from remote sensing (RS) platforms (such as SMOS and SMAP) and reanalysis products from land surface models are typically available on a coarse spatial granularity of several square km. Ground based sensors on the other hand provide observations on a finer spatial scale (meter scale or less) but are sparsely available. Soil moisture is affected by high variability due to complex interactions between geologic, topographic, vegetation and atmospheric variables. Hydrologic processes usually occur at a scale of 1 km or less and therefore spatially ubiquitous and temporally periodic soil moisture products at this scale are required to aid local decision makers in agriculture, weather prediction and reservoir operations. Past literature has largely focused on downscaling RS soil moisture for a small extent of a field or a watershed and hence the applicability of such products has been limited. The present study employs a spatial Bayesian Hierarchical Model (BHM) to derive soil moisture products at a spatial scale of 1 km for the state of Oklahoma by fusing point scale Mesonet data and coarse scale RS data for soil moisture and its auxiliary covariates such as precipitation, topography, soil texture and vegetation. It is seen that the BHM model handles change of support problems easily while performing accurate uncertainty quantification arising from measurement errors and imperfect retrieval algorithms. The computational challenge arising due to the large number of measurements is tackled by utilizing basis function approaches and likelihood approximations. The BHM model can be considered as a complex Bayesian extension of traditional geostatistical prediction methods (such as Kriging) for large datasets in the presence of uncertainties.

  12. A Model-Model and Data-Model Comparison for the Early Eocene Hydrological Cycle

    Science.gov (United States)

    Carmichael, Matthew J.; Lunt, Daniel J.; Huber, Matthew; Heinemann, Malte; Kiehl, Jeffrey; LeGrande, Allegra; Loptson, Claire A.; Roberts, Chris D.; Sagoo, Navjit; Shields, Christine

    2016-01-01

    A range of proxy observations have recently provided constraints on how Earth's hydrological cycle responded to early Eocene climatic changes. However, comparisons of proxy data to general circulation model (GCM) simulated hydrology are limited and inter-model variability remains poorly characterised. In this work, we undertake an intercomparison of GCM-derived precipitation and P - E distributions within the extended EoMIP ensemble (Eocene Modelling Intercomparison Project; Lunt et al., 2012), which includes previously published early Eocene simulations performed using five GCMs differing in boundary conditions, model structure, and precipitation-relevant parameterisation schemes. We show that an intensified hydrological cycle, manifested in enhanced global precipitation and evaporation rates, is simulated for all Eocene simulations relative to the preindustrial conditions. This is primarily due to elevated atmospheric paleo-CO2, resulting in elevated temperatures, although the effects of differences in paleogeography and ice sheets are also important in some models. For a given CO2 level, globally averaged precipitation rates vary widely between models, largely arising from different simulated surface air temperatures. Models with a similar global sensitivity of precipitation rate to temperature (dP=dT ) display different regional precipitation responses for a given temperature change. Regions that are particularly sensitive to model choice include the South Pacific, tropical Africa, and the Peri-Tethys, which may represent targets for future proxy acquisition. A comparison of early and middle Eocene leaf-fossil-derived precipitation estimates with the GCM output illustrates that GCMs generally underestimate precipitation rates at high latitudes, although a possible seasonal bias of the proxies cannot be excluded. Models which warm these regions, either via elevated CO2 or by varying poorly constrained model parameter values, are most successful in simulating a

  13. Coupling Radar Rainfall to Hydrological Models for Water Abstraction Management

    Science.gov (United States)

    Asfaw, Alemayehu; Shucksmith, James; Smith, Andrea; MacDonald, Ken

    2015-04-01

    The impacts of climate change and growing water use are likely to put considerable pressure on water resources and the environment. In the UK, a reform to surface water abstraction policy has recently been proposed which aims to increase the efficiency of using available water resources whilst minimising impacts on the aquatic environment. Key aspects to this reform include the consideration of dynamic rather than static abstraction licensing as well as introducing water trading concepts. Dynamic licensing will permit varying levels of abstraction dependent on environmental conditions (i.e. river flow and quality). The practical implementation of an effective dynamic abstraction strategy requires suitable flow forecasting techniques to inform abstraction asset management. Potentially the predicted availability of water resources within a catchment can be coupled to predicted demand and current storage to inform a cost effective water resource management strategy which minimises environmental impacts. The aim of this work is to use a historical analysis of UK case study catchment to compare potential water resource availability using modelled dynamic abstraction scenario informed by a flow forecasting model, against observed abstraction under a conventional abstraction regime. The work also demonstrates the impacts of modelling uncertainties on the accuracy of predicted water availability over range of forecast lead times. The study utilised a conceptual rainfall-runoff model PDM - Probability-Distributed Model developed by Centre for Ecology & Hydrology - set up in the Dove River catchment (UK) using 1km2 resolution radar rainfall as inputs and 15 min resolution gauged flow data for calibration and validation. Data assimilation procedures are implemented to improve flow predictions using observed flow data. Uncertainties in the radar rainfall data used in the model are quantified using artificial statistical error model described by Gaussian distribution and

  14. Hydrological Modeling of the Jezero Crater Outlet-Forming Flood

    Science.gov (United States)

    Fassett, C. I.; Goudge, T. A.

    2017-01-01

    . In the case of Jezero, the discharge through the breach eventually lacked the energy needed to erode through the dam further, preventing complete drainage of the lake. After the initial flood, further incision can take place if additional water flows into, and thus out of, the hydrologically open lake, though the rate of this erosion occurs under more typical fluvial conditions. Despite this qualitative understanding of the process, it is useful to explore numerically what range of model parameters are potentially consistent with obser-vations of the outlet. We ultimately seek to address questions that include: (1) What was the flood hydro-graph?, (2) What sediment transport processes were involved and what can we infer about the erosion process? (3) Can most or all of the Jezero outlet's morphology be explained as a consequence of catastrophic formation, or is additional longer-term erosion required?

  15. Improving statistical forecasts of seasonal streamflows using hydrological model output

    Directory of Open Access Journals (Sweden)

    D. E. Robertson

    2013-02-01

    Full Text Available Statistical methods traditionally applied for seasonal streamflow forecasting use predictors that represent the initial catchment condition and future climate influences on future streamflows. Observations of antecedent streamflows or rainfall commonly used to represent the initial catchment conditions are surrogates for the true source of predictability and can potentially have limitations. This study investigates a hybrid seasonal forecasting system that uses the simulations from a dynamic hydrological model as a predictor to represent the initial catchment condition in a statistical seasonal forecasting method. We compare the skill and reliability of forecasts made using the hybrid forecasting approach to those made using the existing operational practice of the Australian Bureau of Meteorology for 21 catchments in eastern Australia. We investigate the reasons for differences. In general, the hybrid forecasting system produces forecasts that are more skilful than the existing operational practice and as reliable. The greatest increases in forecast skill tend to be (1 when the catchment is wetting up but antecedent streamflows have not responded to antecedent rainfall, (2 when the catchment is drying and the dominant source of antecedent streamflow is in transition between surface runoff and base flow, and (3 when the initial catchment condition is near saturation intermittently throughout the historical record.

  16. Improving statistical forecasts of seasonal streamflows using hydrological model output

    Science.gov (United States)

    Robertson, D. E.; Pokhrel, P.; Wang, Q. J.

    2013-02-01

    Statistical methods traditionally applied for seasonal streamflow forecasting use predictors that represent the initial catchment condition and future climate influences on future streamflows. Observations of antecedent streamflows or rainfall commonly used to represent the initial catchment conditions are surrogates for the true source of predictability and can potentially have limitations. This study investigates a hybrid seasonal forecasting system that uses the simulations from a dynamic hydrological model as a predictor to represent the initial catchment condition in a statistical seasonal forecasting method. We compare the skill and reliability of forecasts made using the hybrid forecasting approach to those made using the existing operational practice of the Australian Bureau of Meteorology for 21 catchments in eastern Australia. We investigate the reasons for differences. In general, the hybrid forecasting system produces forecasts that are more skilful than the existing operational practice and as reliable. The greatest increases in forecast skill tend to be (1) when the catchment is wetting up but antecedent streamflows have not responded to antecedent rainfall, (2) when the catchment is drying and the dominant source of antecedent streamflow is in transition between surface runoff and base flow, and (3) when the initial catchment condition is near saturation intermittently throughout the historical record.

  17. Using the object modeling system for hydrological model development and application

    Directory of Open Access Journals (Sweden)

    S. Kralisch

    2005-01-01

    Full Text Available State of the art challenges in sustainable management of water resources have created demand for integrated, flexible and easy to use hydrological models which are able to simulate the quantitative and qualitative aspects of the hydrological cycle with a sufficient degree of certainty. Existing models which have been de-veloped to fit these needs are often constrained to specific scales or purposes and thus can not be easily adapted to meet different challenges. As a solution for flexible and modularised model development and application, the Object Modeling System (OMS has been developed in a joint approach by the USDA-ARS, GPSRU (Fort Collins, CO, USA, USGS (Denver, CO, USA, and the FSU (Jena, Germany. The OMS provides a modern modelling framework which allows the implementation of single process components to be compiled and applied as custom tailored model assemblies. This paper describes basic principles of the OMS and its main components and explains in more detail how the problems during coupling of models or model components are solved inside the system. It highlights the integration of different spatial and temporal scales by their representation as spatial modelling entities embedded into time compound components. As an exam-ple the implementation of the hydrological model J2000 is discussed.

  18. Probabilistic hydrological nowcasting using radar based nowcasting techniques and distributed hydrological models: application in the Mediterranean area

    Science.gov (United States)

    Poletti, Maria Laura; Pignone, Flavio; Rebora, Nicola; Silvestro, Francesco

    2017-04-01

    The exposure of the urban areas to flash-floods is particularly significant to Mediterranean coastal cities, generally densely-inhabited. Severe rainfall events often associated to intense and organized thunderstorms produced, during the last century, flash-floods and landslides causing serious damages to urban areas and in the worst events led to human losses. The temporal scale of these events has been observed strictly linked to the size of the catchments involved: in the Mediterranean area a great number of catchments that pass through coastal cities have a small drainage area (less than 100 km2) and a corresponding hydrologic response timescale in the order of a few hours. A suitable nowcasting chain is essential for the on time forecast of this kind of events. In fact meteorological forecast systems are unable to predict precipitation at the scale of these events, small both at spatial (few km) and temporal (hourly) scales. Nowcasting models, covering the time interval of the following two hours starting from the observation try to extend the predictability limits of the forecasting models in support of real-time flood alert system operations. This work aims to present the use of hydrological models coupled with nowcasting techniques. The nowcasting model PhaSt furnishes an ensemble of equi-probable future precipitation scenarios on time horizons of 1-3 h starting from the most recent radar observations. The coupling of the nowcasting model PhaSt with the hydrological model Continuum allows to forecast the flood with a few hours in advance. In this way it is possible to generate different discharge prediction for the following hours and associated return period maps: these maps can be used as a support in the decisional process for the warning system.

  19. Catchment-Scale Simulation of Nitrogen Dynamics Using a Modular Hydrological Modelling Framework

    Science.gov (United States)

    Basu, N. B.; Shafii, M.; Craig, J. R.; Schiff, S. L.; Van Cappellen, P.

    2016-12-01

    The hydrological modelling framework Raven is a modular and flexible modelling framework for semi-distributed simulation of watershed hydrology. Raven enables the incorporation of different hydrologic processes, the evaluation of model choices, and hypothesis testing about model structure. Raven also supports the simulation of solute transport in catchments and in the surface water network. We developed a coupled hydrological-biogeochemical model within Raven to simulate catchment-scale nitrate loss in the Grand River Watershed (GRW), the largest basin in Southern Ontario feeding into the Lake Erie. GRW is a snow-dominated catchment and has severe nitrate contamination issues (due to intensive agriculture and a dense tile drainage system), especially during the snowmelt events. We used several sets of hydrochemical data (including tiles data), combined with a unique flow partitioning approach to constrain flow pathways in the hydrology model, which is critical to the accurate representation of the sources and sinks in the biogeochemical model. A biogeochemical model was then coupled to the hydrologic model in Raven to simulate nitrogen processes and identify nitrate loss at a variety of spatio-temporal scales in GRW. The preliminary results obtained after applying the coupled model to a subbasin in GRW are promising and we are at the stage of upscaling the model to the entire watershed. Raven, as an open-source object-oriented software, is currently being used by watershed managers, and incorporating nutrients dynamics in the code makes it applicable to solving water quality problems at the catchment scale as well.

  20. Evaluation of the value of radar QPE data and rain gauge data for hydrological modeling

    DEFF Research Database (Denmark)

    He, Xin; Sonnenborg, Torben Obel; Refsgaard, Jens Christian

    2013-01-01

    Weather radar-based quantitative precipitation estimation (QPE) is in principle superior to the areal precipitation estimated by using rain gauge data only, and therefore has become increasingly popular in applications such as hydrological modeling. The present study investigates the potential...... rainfall and subsequently the simulated hydrological responses. A headwater catchment located in western Denmark is chosen as the study site. Two hydrological models are built using the MIKE SHE code, where they have identical model structures expect for the rainfall forcing: one model is based on rain...... gauge interpolated rainfall, while the other is based on radar QPE which is a combination of both radar and rain gauge information. The two hydrological models are inversely calibrated and then validated against field observations. The model results show that the improvement introduced by using radar...

  1. Effect of length of the observed dataset on the calibration of a distributed hydrological model

    Science.gov (United States)

    Cui, X.; Sun, W.; Teng, J.; Song, H.; Yao, X.

    2015-05-01

    Calibration of hydrological models in ungauged basins is now a hot research topic in the field of hydrology. In addition to the traditional method of parameter regionalization, using discontinuous flow observations to calibrate hydrological models has gradually become popular in recent years. In this study, the possibility of using a limited number of river discharge data to calibrate a distributed hydrological model, the Soil and Water Assessment Tool (SWAT), was explored. The influence of the quantity of discharge measurements on model calibration in the upper Heihe Basin was analysed. Calibration using only one year of daily discharge measurements was compared with calibration using three years of discharge data. The results showed that the parameter values derived from calibration using one year's data could achieve similar model performance with calibration using three years' data, indicating that there is a possibility of using limited numbers of discharge data to calibrate the SWAT model effectively in poorly gauged basins.

  2. Validating global hydrological models by ground and space gravimetry

    Institute of Scientific and Technical Information of China (English)

    ZHOU JiangCun; SUN HePing; XU JianQiao

    2009-01-01

    The long-term continuous gravity observations obtained by the superconducting gravimeters (SG) at seven globally-distributed stations are comprehensively analyzed. After removing the signals related to the Earth's tides and variations in the Earth's rotation, the gravity residuals are used to describe the seasonal fluctuations in gravity field. Meanwhile, the gravity changes due to the air pressure loading are theoretically modeled from the measurements of the local air pressure, and those due to land water and nontidal ocean loading are also calculated according to the corresponding numerical models. The numerical results show that the gravity changes due to both the air pressure and land water loading are as large as 100×10-9 m s-2 in magnitude, and about 10×10-9 m s-2 for those due to the nontidal ocean loading in the coastal area. On the other hand, the monthly-averaged gravity variations over the area surrounding the stations are derived from the spherical harmonic coefficients of the GRACE-recovered gravity fields, by using Gaussian smoothing technique in which the radius is set to be 600 km. Compared the land water induced gravity variations, the SG observations after removal of tides, polar motion effects, air pressure and nontidal ocean loading effects and the GRACE-derived gravity variations with each other, it is inferred that both the ground- and space-based gravity observations can effectively detect the seasonal gravity variations with a magnitude of 100×10-9 m s-2 induced by the land water loading. This implies that high precision gravimetry is an effective technique to validate the reliabilities of the hydrological models.

  3. Human impact parameterization in global hydrological models improves estimates of monthly discharges and hydrological extremes: a multi-model validation study

    Science.gov (United States)

    Veldkamp, Ted; Ward, Philip; de Moel, Hans; Aerts, Jeroen; Muller Schmied, Hannes; Portmann, Felix; Zhao, Fang; Gerten, Dieter; Masaki, Yoshimitsu; Pokhrel, Yadu; Satoh, Yusuke; Gosling, Simon; Zaherpour, Jamal; Wada, Yoshihide

    2017-04-01

    Human impacts on freshwater resources and hydrological features form the core of present-day water related hazards, like flooding, droughts, water scarcity, and water quality issues. Driven by the societal and scientific needs to correctly model such water related hazards a fair amount of resources has been invested over the past decades to represent human activities and their interactions with the hydrological cycle in global hydrological models (GHMs). Use of these GHMs - including the human dimension - is widespread, especially in water resources research. Evaluation or comparative assessments of the ability of such GHMs to represent real-world hydrological conditions are, unfortunately, however often limited to (near-)natural river basins. Such studies are, therefore, not able to test the model representation of human activities and its associated impact on estimates of freshwater resources or assessments of hydrological extremes. Studies that did perform a validation exercise - including the human dimension and looking into managed catchments - either focused only on one hydrological model, and/or incorporated only a few data points (i.e. river basins) for validation. To date, a comprehensive comparative analysis that evaluates whether and where incorporating the human dimension actually improves the performance of different GHMs with respect to their representation of real-world hydrological conditions and extremes is missing. The absence of such study limits the potential benchmarking of GHMs and their outcomes in hydrological hazard and risk assessments significantly, potentially hampering incorporation of GHMs and their modelling results in actual policy making and decision support with respect to water resources management. To address this issue, we evaluate in this study the performance of five state-of-the-art GHMs that include anthropogenic activities in their modelling scheme, with respect to their representation of monthly discharges and hydrological

  4. Enhancing Hydrologic Modelling in the Coupled Weather Research and Forecasting-Urban Modelling System

    Science.gov (United States)

    Yang, Jiachuan; Wang, Zhi-Hua; Chen, Fei; Miao, Shiguang; Tewari, Mukul; Voogt, James A.; Myint, Soe

    2015-04-01

    Urbanization modifies surface energy and water budgets, and has significant impacts on local and regional hydroclimate. In recent decades, a number of urban canopy models have been developed and implemented into the Weather Research and Forecasting (WRF) model to capture urban land-surface processes. Most of these models are inadequate due to the lack of realistic representation of urban hydrological processes. Here, we implement physically-based parametrizations of urban hydrological processes into the single layer urban canopy model in the WRF model. The new single-layer urban canopy model features the integration of, (1) anthropogenic latent heat, (2) urban irrigation, (3) evaporation from paved surfaces, and (4) the urban oasis effect. The new WRF-urban modelling system is evaluated against field measurements for four different cities; results show that the model performance is substantially improved as compared to the current schemes, especially for latent heat flux. In particular, to evaluate the performance of green roofs as an urban heat island mitigation strategy, we integrate in the urban canopy model a multilayer green roof system, enabled by the physical urban hydrological schemes. Simulations show that green roofs are capable of reducing surface temperature and sensible heat flux as well as enhancing building energy efficiency.

  5. One-day offset in daily hydrologic modeling: An exploration of the issue in automatic model calibration

    Science.gov (United States)

    The literature of daily hydrologic modelling illustrates that daily simulation models are incapable of accurately representing hydrograph timing due to relationships between precipitation and watershed hydrologic response. For watersheds with a time of concentration less than 24 hrs and a late day p...

  6. SWAT hydrologic model parameter uncertainty and its implications for hydroclimatic projections in snowmelt-dependent watersheds

    Science.gov (United States)

    Ficklin, Darren L.; Barnhart, Bradley L.

    2014-11-01

    The effects of climate change on water resources have been studied extensively throughout the world through the use of hydrologic models coupled with General Circulation Model (GCM) output or climate sensitivity scenarios. This paper examines the effects of hydrologic model parameterization uncertainty or equifinality, where multiple unique hydrologic model parameter sets can result in adequate calibration metrics, on hydrologic projections from downscaled GCMs for three snowmelt-dependent watersheds (upper reaches of the Clearwater, Gunnison, and Sacramento River watersheds) in the western United States. The hydrologic model used in this study is the Soil and Water Assessment Tool (SWAT) and is calibrated for discharge at the watershed outlet in each watershed. Despite achieving similar calibration metrics, a majority of hydrologic projections of average annual streamflow during the 2080s were statistically different, with differences in magnitude and direction (increase or decrease) compared to historical annual streamflows. At the average monthly time-scale, a majority of the hydrologic projections varied in peak streamflow timing, peak streamflow magnitude, summer streamflows, as well as overall increases or decreases compared to the historical monthly streamflows. Snowmelt projections from the SWAT model also widely varied, both in depth and snowmelt peak timing, for all watersheds. Since a large portion of the runoff-producing regions in the western United States is snowmelt-dependent, this has large implications for the prediction of the amount and timing of streamflow in the coming century. This paper shows that hydrologic model parameterizations that give similar adequate calibration metrics can lead to statistically significant differences in hydrologic projections under climate change. Therefore, researchers and water resource managers should account for this uncertainty by assembling ensemble projections from both multiple parameter sets and GCMs.

  7. A framework to assess the realism of model structures using hydrological signatures

    Directory of Open Access Journals (Sweden)

    T. Euser

    2012-11-01

    Full Text Available The use of flexible hydrological model structures for hypothesis testing requires an objective and diagnostic method to identify whether a rainfall-runoff model structure is suitable for a certain catchment. To determine if a model structure is realistic, i.e. if it captures the relevant runoff processes, both performance and consistency are important. Performance describes the ability of a model structure to mimic a specific part of the hydrological behaviour in a specific catchment. This can be assessed based on evaluation criteria, such as the goodness of fit of specific hydrological signatures obtained from hydrological data. Consistency describes the ability of a model structure to adequately reproduce several hydrological signatures simultaneously, while using the same set of parameter values. In this paper we describe and demonstrate a new evaluation Framework for Assessing the Realism of Model structures (FARM. The evaluation framework tests for both performance and consistency using a principal component analysis on a range of evaluation criteria, all emphasizing different hydrological behaviour. The utility of this evaluation framework is demonstrated in a case study of two small headwater catchments (Maimai, New Zealand and Wollefsbach, Luxembourg. Eight different hydrological signatures and eleven model structures have been used for this study. The results suggest that some model structures may reveal the same degree of performance for selected evaluation criteria, while showing differences in consistency. The results also show that some model structures have a higher performance and consistency than others. The principal component analysis in combination with several hydrological signatures is shown to be useful to visualize the performance and consistency of a model structure for the study catchments. With this framework performance and consistency can be tested to identify which model structures suit a catchment better than other

  8. Parsimonious Hydrologic and Nitrate Response Models For Silver Springs, Florida

    Science.gov (United States)

    Klammler, Harald; Yaquian-Luna, Jose Antonio; Jawitz, James W.; Annable, Michael D.; Hatfield, Kirk

    2014-05-01

    Silver Springs with an approximate discharge of 25 m3/sec is one of Florida's first magnitude springs and among the largest springs worldwide. Its 2500-km2 springshed overlies the mostly unconfined Upper Floridan Aquifer. The aquifer is approximately 100 m thick and predominantly consists of porous, fractured and cavernous limestone, which leads to excellent surface drainage properties (no major stream network other than Silver Springs run) and complex groundwater flow patterns through both rock matrix and fast conduits. Over the past few decades, discharge from Silver Springs has been observed to slowly but continuously decline, while nitrate concentrations in the spring water have enormously increased from a background level of 0.05 mg/l to over 1 mg/l. In combination with concurrent increases in algae growth and turbidity, for example, and despite an otherwise relatively stable water quality, this has given rise to concerns about the ecological equilibrium in and near the spring run as well as possible impacts on tourism. The purpose of the present work is to elaborate parsimonious lumped parameter models that may be used by resource managers for evaluating the springshed's hydrologic and nitrate transport responses. Instead of attempting to explicitly consider the complex hydrogeologic features of the aquifer in a typically numerical and / or stochastic approach, we use a transfer function approach wherein input signals (i.e., time series of groundwater recharge and nitrate loading) are transformed into output signals (i.e., time series of spring discharge and spring nitrate concentrations) by some linear and time-invariant law. The dynamic response types and parameters are inferred from comparing input and output time series in frequency domain (e.g., after Fourier transformation). Results are converted into impulse (or step) response functions, which describe at what time and to what magnitude a unitary change in input manifests at the output. For the

  9. Addressing the Challenges of Distributed Hydrologic Modeling for Operational Forecasting

    Science.gov (United States)

    Butts, M. B.; Yamagata, K.; Kobor, J.; Fontenot, E.

    2008-05-01

    from flood modelling on the Odra River in Poland show that this model system can perform as well as traditional models and gives good predictions in mountainous catchments. By allowing different process representations to be applied within the same framework, it is possible to develop hydrological models in a phased manner. This phased approach was used for example in the Napa Valley, California where it is important to balance water demands for urban areas, agriculture, and ecosystem preservation while maintaining flood protection and water quality. A first regional model was developed with a detailed description of the surface process and a simple linear reservoir was used to simulate the groundwater component. Then a more detailed fully-distributed finite-difference groundwater model was constructed within the same framework while maintaining the surface water components. In the DMIP case study, Blue River, Oklahoma, this flexibility has been used to evaluate the performance of different model structures, and to determine the impact of grid resolution on model accuracy. The results show clear limits to the benefit attained by increasing model complexity and resolution. In contrast, detailed flood mapping using high resolution topography carried out with this tool in South Boulder Creek, Colorado show that very detailed description of the topography and flows paths are required for accurate flood mapping and determination of the flood risk. This framework is now being used to develop a flood forecasting system for the Big Cypress Basin in Florida.

  10. Differential Hydrological Grey Model (DHGM) with self-memory function and its application to flood forecasting

    Institute of Scientific and Technical Information of China (English)

    CHEN XiangDong; XIA Jun; XU Qian

    2009-01-01

    This paper addresses a problem of flood forecasting with the self-memory function. Considering flood forecasting's uncertainty and updating demand, a hybrid hydrological model, namely Differential Hydrological Grey Model with self-memory function (DHGM-SM), is developed. The model has two fold features. One is to establish a self-memorization equation linked with DHGM, that could extract useful information from past data series and realize updating of hydrological dynamic process. The other is that this model has higher efficiency relative to original hydrological model without self-memory function. This approach was applied to river flow forecasting of two representative basins in Tunxi of South China and Daqinggou of North China. It is shown that this hybrid method has satisfactory forecasting accuracy by examination of both calibration and validation.

  11. Using models for the optimization of hydrologic monitoring

    Science.gov (United States)

    Fienen, Michael N.; Hunt, Randall J.; Doherty, John E.; Reeves, Howard W.

    2011-01-01

    Hydrologists are often asked what kind of monitoring network can most effectively support science-based water-resources management decisions. Currently (2011), hydrologic monitoring locations often are selected by addressing observation gaps in the existing network or non-science issues such as site access. A model might then be calibrated to available data and applied to a prediction of interest (regardless of how well-suited that model is for the prediction). However, modeling tools are available that can inform which locations and types of data provide the most 'bang for the buck' for a specified prediction. Put another way, the hydrologist can determine which observation data most reduce the model uncertainty around a specified prediction. An advantage of such an approach is the maximization of limited monitoring resources because it focuses on the difference in prediction uncertainty with or without additional collection of field data. Data worth can be calculated either through the addition of new data or subtraction of existing information by reducing monitoring efforts (Beven, 1993). The latter generally is not widely requested as there is explicit recognition that the worth calculated is fundamentally dependent on the prediction specified. If a water manager needs a new prediction, the benefits of reducing the scope of a monitoring effort, based on an old prediction, may be erased by the loss of information important for the new prediction. This fact sheet focuses on the worth or value of new data collection by quantifying the reduction in prediction uncertainty achieved be adding a monitoring observation. This calculation of worth can be performed for multiple potential locations (and types) of observations, which then can be ranked for their effectiveness for reducing uncertainty around the specified prediction. This is implemented using a Bayesian approach with the PREDUNC utility in the parameter estimation software suite PEST (Doherty, 2010). The

  12. On the Impact of Uncertainty in Initial Conditions of Hydrologic Models on Prediction

    Science.gov (United States)

    Razavi, S.; Sheikholeslami, R.

    2015-12-01

    Determining the initial conditions for predictive models remains a challenge due to the uncertainty in measurement/identification of the state variables at the scale of interest. However, the characterization of uncertainty in initial conditions has arguably attracted less attention compared with other sources of uncertainty in hydrologic modelling (e.g, parameter, data, and structural uncertainty). This is perhaps because it is commonly believed that: (1) hydrologic systems (relatively rapidly) forget their initial conditions over time, and (2) other sources of uncertainty (e.g., in data) are dominant. This presentation revisits the basic principles of the theory of nonlinear dynamical systems in the context of hydrologic systems. Through simple example case studies, we demonstrate how and under what circumstances different hydrologic processes represent a range of attracting limit sets in their evolution trajectory in state space over time, including fixed points, limit cycles (periodic behaviour), torus (quasi-periodic behaviour), and strange attractors (chaotic behaviour). Furthermore, the propagation (or dissipation) of uncertainty in initial conditions of several hydrologic models through time, under any of the possible attracting limit sets, is investigated. This study highlights that there are definite situations in hydrology where uncertainty in initial conditions remains of significance. The results and insights gained have important implications for hydrologic modelling under non-stationarity in climate and environment.

  13. On the hydrologic adjustment of climate-model projections: The potential pitfall of potential evapotranspiration

    Science.gov (United States)

    Milly, P.C.D.; Dunne, K.A.

    2011-01-01

    Hydrologic models often are applied to adjust projections of hydroclimatic change that come from climate models. Such adjustment includes climate-bias correction, spatial refinement ("downscaling"), and consideration of the roles of hydrologic processes that were neglected in the climate model. Described herein is a quantitative analysis of the effects of hydrologic adjustment on the projections of runoff change associated with projected twenty-first-century climate change. In a case study including three climate models and 10 river basins in the contiguous United States, the authors find that relative (i.e., fractional or percentage) runoff change computed with hydrologic adjustment more often than not was less positive (or, equivalently, more negative) than what was projected by the climate models. The dominant contributor to this decrease in runoff was a ubiquitous change in runoff (median 211%) caused by the hydrologic model's apparent amplification of the climate-model-implied growth in potential evapotranspiration. Analysis suggests that the hydrologic model, on the basis of the empirical, temperature-based modified Jensen-Haise formula, calculates a change in potential evapotranspiration that is typically 3 times the change implied by the climate models, which explicitly track surface energy budgets. In comparison with the amplification of potential evapotranspiration, central tendencies of other contributions from hydrologic adjustment (spatial refinement, climate-bias adjustment, and process refinement) were relatively small. The authors' findings highlight the need for caution when projecting changes in potential evapotranspiration for use in hydrologic models or drought indices to evaluate climatechange impacts on water. Copyright ?? 2011, Paper 15-001; 35,952 words, 3 Figures, 0 Animations, 1 Tables.

  14. Evaluation of remote-sensing-based rainfall products through predictive capability in hydrological runoff modelling

    DEFF Research Database (Denmark)

    Stisen, Simon; Sandholt, Inge

    2010-01-01

    The emergence of regional and global satellite-based rainfall products with high spatial and temporal resolution has opened up new large-scale hydrological applications in data-sparse or ungauged catchments. Particularly, distributed hydrological models can benefit from the good spatial coverage...... and distributed nature of satellite-based rainfall estimates (SRFE). In this study, five SRFEs with temporal resolution of 24 h and spatial resolution between 8 and 27 km have been evaluated through their predictive capability in a distributed hydrological model of the Senegal River basin in West Africa. The main...

  15. mRM - multiscale Routing Model for Land Surface and Hydrologic Models

    Science.gov (United States)

    Cuntz, M.; Thober, S.; Mai, J.; Samaniego, L. E.; Gochis, D. J.; Kumar, R.

    2015-12-01

    Routing streamflow through a river network is a basic step within any distributed hydrologic model. It integrates the generated runoff and allows comparison with observed discharge at the outlet of a catchment. The Muskingum routing is a textbook river routing scheme that has been implemented in Earth System Models (e.g., WRF-HYDRO), stand-alone routing schemes (e.g., RAPID), and hydrologic models (e.g., the mesoscale Hydrologic Model). Most implementations suffer from a high computational demand because the spatial routing resolution is fixed to that of the elevation model irrespective of the hydrologic modeling resolution. This is because the model parameters are scale-dependent and cannot be used at other resolutions without re-estimation. Here, we present the multiscale Routing Model (mRM) that allows for a flexible choice of the routing resolution. mRM exploits the Multiscale Parameter Regionalization (MPR) included in the open-source mesoscale Hydrologic Model (mHM, www.ufz.de/mhm) that relates model parameters to physiographic properties and allows to estimate scale-independent model parameters. mRM is currently coupled to mHM and is presented here as stand-alone Free and Open Source Software (FOSS). The mRM source code is highly modular and provides a subroutine for internal re-use in any land surface scheme. mRM is coupled in this work to the state-of-the-art land surface model Noah-MP. Simulation results using mRM are compared with those available in WRF-HYDRO for the Red River during the period 1990-2000. mRM allows to increase the routing resolution from 100m to more than 10km without deteriorating the model performance. Therefore, it speeds up model calculation by reducing the contribution of routing to total runtime from over 80% to less than 5% in the case of WRF-HYDRO. mRM thus makes discharge data available to land surface modeling with only little extra calculations.

  16. Development of hybrid 3-D hydrological modeling for the NCAR Community Earth System Model (CESM)

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Xubin [Univ. of Arizona, Tucson, AZ (United States); Troch, Peter [Univ. of Arizona, Tucson, AZ (United States); Pelletier, Jon [Univ. of Arizona, Tucson, AZ (United States); Niu, Guo-Yue [Univ. of Arizona, Tucson, AZ (United States); Gochis, David [NCAR Research Applications Lab., Boulder, CO (United States)

    2015-11-15

    This is the Final Report of our four-year (3-year plus one-year no cost extension) collaborative project between the University of Arizona (UA) and the National Center for Atmospheric Research (NCAR). The overall objective of our project is to develop and evaluate the first hybrid 3-D hydrological model with a horizontal grid spacing of 1 km for the NCAR Community Earth System Model (CESM).

  17. DECO - Extracting and converting meteorological driving data for hydrological models via a web-based platform

    Science.gov (United States)

    Richling, Andy; Fischer, Madlen; Rust, Henning W.; Kadow, Christopher; Vagenas, Christos; Ulbrich, Uwe

    2016-04-01

    Climate change impact assessment for hydrology and related water resource management is based on global climate projections, their regional downscaling and the subsequent use of this data in hydrological models. While global climate projections, as well as regional downscaled data are relatively easily available due to the CMIP and CORDEX activities, it cost some effort to prepare this data for use with hydrological models. This implies several steps: a change of grid or transformation to gauge based values, a bias correction and a conversion to the file format from climate model standards to a format accessible by the hydrological model. In BINGO, we developed the plug-in DECO for the web-based (also command line interface) evaluation platform FreVa (http://freva.met.fu-berlin.de) to search and extract climate data, post-process and convert it to the required output format. As far as possible, all post-processing steps are identical for all models at all BINGO research sites to ensure comparability; the research site and model specific file format conversion has been implemented for all hydrological models to be used. This approach ensures that post-processing (bias correction, grid conversion, etc.) are identical for all sites and are tested by a large community; data extraction is easily reproducible and and new data set injected into the FreVa data pool can be readily extracted and converted for timely use with hydrological models. Apart from transparency and reproducibility, this approach allows the timely conversion of new (downscaled) climate projections to hydrological application and may serve as an example for data dissemination within the hydrological modeling community.

  18. Location of diversions from the surface-water network of the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the name and location for the diversions from the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central...

  19. Automated Geospatial Watershed Assessment (AGWA) Tool for hydrologic modeling and watershed assessment

    Science.gov (United States)

    Using basic, easily attainable GIS data, AGWA provides a simple, direct, and repeatable methodology for hydrologic model setup, execution, and visualization. AGWA experiences activity from over 170 countries. It l has been downloaded over 11,000 times.

  20. Interpolation of Missing Precipitation Data Using Kernel Estimations for Hydrologic Modeling

    Directory of Open Access Journals (Sweden)

    Hyojin Lee

    2015-01-01

    Full Text Available Precipitation is the main factor that drives hydrologic modeling; therefore, missing precipitation data can cause malfunctions in hydrologic modeling. Although interpolation of missing precipitation data is recognized as an important research topic, only a few methods follow a regression approach. In this study, daily precipitation data were interpolated using five different kernel functions, namely, Epanechnikov, Quartic, Triweight, Tricube, and Cosine, to estimate missing precipitation data. This study also presents an assessment that compares estimation of missing precipitation data through Kth nearest neighborhood (KNN regression to the five different kernel estimations and their performance in simulating streamflow using the Soil Water Assessment Tool (SWAT hydrologic model. The results show that the kernel approaches provide higher quality interpolation of precipitation data compared with the KNN regression approach, in terms of both statistical data assessment and hydrologic modeling performance.

  1. A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United...

  2. Monthly Precipitation Input Data for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the monthly precipitation for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000...

  3. Virtual wells used for pumpage for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Abstract: This digital dataset contains the virtual wells used for pumpage for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an...

  4. Farm Process (FMP) Parameters used in the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset defines the farm-process parameters used in the transient hydrologic model of the Central Valley flow system. The Central Valley encompasses an...

  5. Integrating topography, hydrology and rock structure in weathering rate models of spring watersheds

    NARCIS (Netherlands)

    Pacheco, F.A.L.; Weijden, C.H. van der

    2012-01-01

    Weathering rate models designed for watersheds combine chemical data of discharging waters with morphologic and hydrologic parameters of the catchments. At the spring watershed scale, evaluation of morphologic parameters is subjective due to difficulties in conceiving the catchment geometry. Besides

  6. Monthly Diversions from the Surface-Water Network of the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the monthly diversions from the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an...

  7. Monthly inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the monthly inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an...

  8. A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1WS

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United...

  9. Informing hydrological models with ground-based time-lapse relative gravimetry: potential and limitations

    DEFF Research Database (Denmark)

    Bauer-Gottwein, Peter; Christiansen, Lars; Rosbjerg, Dan

    2011-01-01

    Coupled hydrogeophysical inversion emerges as an attractive option to improve the calibration and predictive capability of hydrological models. Recently, ground-based time-lapse relative gravity (TLRG) measurements have attracted increasing interest because there is a direct relationship between ...

  10. Surface-Water Network for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate...

  11. Inflow Locations and Magnitude Input Files to the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset contains the name and location for the inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley...

  12. Locations of hydraulic-head observations (HOBS) for the Central Valley Hydrologic Model (CVHM)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset defines the well locations for hydraulic-head observations used in the calibration of the transient hydrologic model of the Central Valley flow...

  13. Micro and Macroscale Drivers of Nutrient Concentrations in Urban Streams in South, Central and North America

    Science.gov (United States)

    Loiselle, Steven A.; Gasparini Fernandes Cunha, Davi; Shupe, Scott; Valiente, Elsa; Rocha, Luciana; Heasley, Eleanore; Belmont, Patricia Pérez; Baruch, Avinoam

    2016-01-01

    Global metrics of land cover and land use provide a fundamental basis to examine the spatial variability of human-induced impacts on freshwater ecosystems. However, microscale processes and site specific conditions related to bank vegetation, pollution sources, adjacent land use and water uses can have important influences on ecosystem conditions, in particular in smaller tributary rivers. Compared to larger order rivers, these low-order streams and rivers are more numerous, yet often under-monitored. The present study explored the relationship of nutrient concentrations in 150 streams in 57 hydrological basins in South, Central and North America (Buenos Aires, Curitiba, São Paulo, Rio de Janeiro, Mexico City and Vancouver) with macroscale information available from global datasets and microscale data acquired by trained citizen scientists. Average sub-basin phosphate (P-PO4) concentrations were found to be well correlated with sub-basin attributes on both macro and microscales, while the relationships between sub-basin attributes and nitrate (N-NO3) concentrations were limited. A phosphate threshold for eutrophic conditions (>0.1 mg L-1 P-PO4) was exceeded in basins where microscale point source discharge points (eg. residential, industrial, urban/road) were identified in more than 86% of stream reaches monitored by citizen scientists. The presence of bankside vegetation covaried (rho = –0.53) with lower phosphate concentrations in the ecosystems studied. Macroscale information on nutrient loading allowed for a strong separation between basins with and without eutrophic conditions. Most importantly, the combination of macroscale and microscale information acquired increased our ability to explain sub-basin variability of P-PO4 concentrations. The identification of microscale point sources and bank vegetation conditions by citizen scientists provided important information that local authorities could use to improve their management of lower order river

  14. A macro-scale perspective on within-farm management: how climate and topography alter the effect of farming practices.

    Science.gov (United States)

    Amano, Tatsuya; Kusumoto, Yoshinobu; Okamura, Hiroshi; Baba, Yuki G; Hamasaki, Kenji; Tanaka, Koichi; Yamamoto, Shori

    2011-12-01

    Organic farming has the potential to reverse biodiversity loss in farmland and benefit agriculture by enhancing ecosystem services. Although the mixed success of organic farming in enhancing biodiversity has been attributed to differences in taxa and landscape context, no studies have focused on the effect of macro-scale factors such as climate and topography. This study provides the first assessment of the impact of macro-scale factors on the effectiveness of within-farm management on biodiversity, using spiders in Japan as an example. A multilevel modelling approach revealed that reducing pesticide applications increases spider abundance, particularly in areas with high precipitation, which were also associated with high potential spider abundance. Using the model we identified areas throughout Japan that can potentially benefit from organic farming. The alteration of local habitat-abundance relations by macro-scale factors could explain the reported low spatial generality in the effects of organic farming and patterns of habitat association.

  15. Global modeling of withdrawal, allocation and consumptive use of surface water and groundwater resources

    NARCIS (Netherlands)

    Wada, Y.; Wisser, D.; Bierkens, M. F. P.

    2014-01-01

    To sustain growing food demand and increasing standard of living, global water withdrawal and consumptive water use have been increasing rapidly. To analyze the human perturbation on water resources consistently over large scales, a number of macro-scale hydrological models (MHMs) have been develope

  16. Global modeling of withdrawal, allocation and consumptive use of surface water and groundwater resources

    NARCIS (Netherlands)

    Wada, Y.; Wisser, D.; Bierkens, M.F.P.

    2013-01-01

    To sustain growing food demand and increasing standard of living, global water withdrawal and consumptive water use have been increasing rapidly. To analyze the human perturbation on water resources consistently over a large scale, a number of macro-scale hydrological models (MHMs) have been develop

  17. Comparison between fully distributed model and semi-distributed model in urban hydrology modeling

    Science.gov (United States)

    Ichiba, Abdellah; Gires, Auguste; Giangola-Murzyn, Agathe; Tchiguirinskaia, Ioulia; Schertzer, Daniel; Bompard, Philippe

    2013-04-01

    Water management in urban areas is becoming more and more complex, especially because of a rapid increase of impervious areas. There will also possibly be an increase of extreme precipitation due to climate change. The aims of the devices implemented to handle the large amount of water generate by urban areas such as storm water retention basins are usually twofold: ensure pluvial flood protection and water depollution. These two aims imply opposite management strategies. To optimize the use of these devices there is a need to implement urban hydrological models and improve fine-scale rainfall estimation, which is the most significant input. In this paper we suggest to compare two models and their sensitivity to small-scale rainfall variability on a 2.15 km2 urban area located in the County of Val-de-Marne (South-East of Paris, France). The average impervious coefficient is approximately 34%. In this work two types of models are used. The first one is CANOE which is semi-distributed. Such models are widely used by practitioners for urban hydrology modeling and urban water management. Indeed, they are easily configurable and the computation time is reduced, but these models do not take fully into account either the variability of the physical properties or the variability of the precipitations. An alternative is to use distributed models that are harder to configure and require a greater computation time, but they enable a deeper analysis (especially at small scales and upstream) of the processes at stake. We used the Multi-Hydro fully distributed model developed at the Ecole des Ponts ParisTech. It is an interacting core between open source software packages, each of them representing a portion of the water cycle in urban environment. Four heavy rainfall events that occurred between 2009 and 2011 are analyzed. The data comes from the Météo-France radar mosaic and the resolution is 1 km in space and 5 min in time. The closest radar of the Météo-France network is

  18. Advances in the study of uncertainty quantification of large-scale hydrological modeling system

    Institute of Scientific and Technical Information of China (English)

    SONG Xiaomeng; ZHAN Chesheng; KONG Fanzhe; XIA Jun

    2011-01-01

    The regional hydrological system is extremely complex because it is affected not only by physical factors but also by human dimensions.And the hydrological models play a very important role in simulating the complex system.However,there have not been effective methods for the model reliability and uncertainty analysis due to its complexity and difficulty.The uncertainties in hydrological modeling come from four important aspects:uncertainties in input data and parameters,uncertainties in model structure,uncertainties in analysis method and the initial and boundary conditions.This paper systematically reviewed the recent advances in the study of the uncertainty analysis approaches in the large-scale complex hydrological model on the basis of uncertainty sources.Also,the shortcomings and insufficiencies in the uncertainty analysis for complex hydrological models are pointed out.And then a new uncertainty quantification platform PSUADE and its uncertainty quantification methods were introduced,which will be a powerful tool and platform for uncertainty analysis of large-scale complex hydrological models.Finally,some future perspectives on uncertainty quantification are put forward.

  19. On the hydrological performance in preparation for fully coupled climate-hydrology modelling in a data-sparse region

    Science.gov (United States)

    Dahl Larsen, Morten Andreas; Senatore, Alfonso; Drews, Martin; Mendicino, Giuseppe

    2016-04-01

    Within the recently emerging field of research employing a dynamical coupling between existing advanced atmosphere-hydrology model codes lays a demand for a wide range of data. The data are needed to both drive and validate the models and need to be of a high quality in terms of spatial coverage, temporal resolution, representation of local attributes and data selection. As a consequence, most studies have been performed over regions of vast data coverage. Although good data coverage is mainly seen in regions of more economically developed countries, the advantages of the coupled models could be of at least equal relevance in lesser developed regions. We here evaluate the prediction capabilities of the joint MIKE SHE-SWET hydrology and land surface model which has recently been employed in a dynamical coupling with the HIRHAM regional climate model (RCM). As a test case, we use the Crati River catchment in Southern Italy. The catchment is used due to: 1) A reasonable availability of data in terms of discharge, a flux tower station, climate stations and gridded data products such as ERA-I, E-OBS, SWBM and RCM output (e.g. MED-CORDEX) albeit with problems resembling those of data sparse regions (lack of temporal overlap, gap filling, availability, hydrogeological interpretations and land use). 2) The location (the Mediterranean) has previously been shown to exhibit substantial biases which potentially could be reduced the future coupling. 3) The Mediterranean highlands with large variations in orography provide an interesting test case as this is poorly represented in models. And 4) Model runs using the WRF-Hydro model have been performed enabling the basis for valuable comparison studies. In the present study the model is parameterized through inverse calibration using variations of the available data to highlight the influence of data quality and availability on the model outcome and assets/disadvantages of individual products.

  20. Hydrologic modeling for water resource assessment in a developing country: the Rwanda case study

    Science.gov (United States)

    Steve McNulty; Erika Cohen Mack; Ge Sun; Peter Caldwell

    2016-01-01

    Accurate water resources assessment using hydrologic models can be a challenge anywhere, but particularly for developing countries with limited financial and technical resources. Developing countries could most benefit from the water resource planning capabilities that hydrologic models can provide, but these countries are least likely to have the data needed to run ...

  1. Interpolation of Missing Precipitation Data Using Kernel Estimations for Hydrologic Modeling

    OpenAIRE

    Hyojin Lee; Kwangmin Kang

    2015-01-01

    Precipitation is the main factor that drives hydrologic modeling; therefore, missing precipitation data can cause malfunctions in hydrologic modeling. Although interpolation of missing precipitation data is recognized as an important research topic, only a few methods follow a regression approach. In this study, daily precipitation data were interpolated using five different kernel functions, namely, Epanechnikov, Quartic, Triweight, Tricube, and Cosine, to estimate missing precipitation data...

  2. Regional review: the hydrology of the Okavango Delta, Botswana—processes, data and modelling

    Science.gov (United States)

    Milzow, Christian; Kgotlhang, Lesego; Bauer-Gottwein, Peter; Meier, Philipp; Kinzelbach, Wolfgang

    2009-09-01

    The wetlands of the Okavango Delta accommodate a multitude of ecosystems with a large diversity in fauna and flora. They not only provide the traditional livelihood of the local communities but are also the basis of a tourism industry that generates substantial revenue for the whole of Botswana. For the global community, the wetlands retain a tremendous pool of biodiversity. As the upstream states Angola and Namibia are developing, however, changes in the use of the water of the Okavango River and in the ecological status of the wetlands are to be expected. To predict these impacts, the hydrology of the Delta has to be understood. This article reviews scientific work done for that purpose, focussing on the hydrological modelling of surface water and groundwater. Research providing input data to hydrological models is also presented. It relies heavily on all types of remote sensing. The history of hydrologic models of the Delta is retraced from the early box models to state-of-the-art distributed hydrological models. The knowledge gained from hydrological models and its relevance for the management of the Delta are discussed.

  3. Ensemble Kalman Filter Data Assimilation with the ParFlow Hydrologic Model

    Science.gov (United States)

    Williams, J. L., III

    2015-12-01

    Hydrometeorological research has shown that simulations of atmospheric processes benefit from sophisticated land surface formulations. Moisture and energy fluxes between the land surface and lower atmosphere are influenced strongly not only by atmospheric conditions, but by terrestrial hydrologic processes, soil moisture distribution in particular. By improving the representation of hydrologic processes, better predictive skill can be achieved in a fully-coupled weather forcasting model. Further improvements in the model can be realized by incorporating observed data values into the hydrologic model. This work applies the Ensemble Kalman Filter functionality included in the Data Assimilation Assimilation Research Testbed (DART), a collection of data assimilation tools maintained at the National Center for Atmospheric Research, to the ParFlow hydrologic model—the hydrologic component of the TerrSysMP fully coupled hydrologic - land surface - atmospheric model system. This generalized data assimilation tool allows observations of variables in the hydrologic component of the system to be incorporated into the overall error covariance matrix thus guiding the development of quantities that define the model state. Single dimension column tests, and a three-dimensional idealized catchment drainage and dry-out test were performed with the ParFlow-DART system to evaluate the effects of assimilating pressure head, soil moisture, and outflow observations on the development of the model through time. The data assimilation system was then applied to the hydrologic portion a fully-coupled (subsurface, land surface, and atmosphere) simulation over the North Rhine-Westphalia region in western Germany to demonstrate the utility of this system in a non-idealized and realistic forecasting situation. The success of these tests will allow the ParFlow-DART system to be developed into a complete data assimilation package for the TerrSysMP fully-coupled modeling system.

  4. Modeling the effect of glacier recession on streamflow response using a coupled glacio-hydrological model

    Directory of Open Access Journals (Sweden)

    B. S. Naz

    2013-04-01

    Full Text Available We describe an integrated spatially distributed hydrologic and glacier dynamic model, and use it to investigate the effect of glacier recession on streamflow variations for the Upper Bow River basin, a tributary of the South Saskatchewan River. Several recent studies have suggested that observed decreases in summer flows in the South Saskatchewan River are partly due to the retreat of glaciers in the river's headwaters. Modeling the effect of glacier changes on streamflow response in river basins such as the South Saskatchewan is complicated due to the inability of most existing physically-based distributed hydrologic models to represent glacier dynamics. We compare predicted variations in glacier extent, snow water equivalent and streamflow discharge made with the integrated model with satellite estimates of glacier area and terminus position, observed streamflow and snow water equivalent measurements over the period of 1980–2007. Simulations with the coupled hydrology-glacier model reduce the uncertainty in streamflow predictions. Our results suggested that on average, the glacier melt contribution to the Bow River flow upstream of Lake Louise is about 30% in summer. For warm and dry years, however, the glacier melt contribution can be as large as 50% in August, whereas for cold years, it can be as small as 20% and the timing of glacier melt signature can be delayed by a month.

  5. Improved ground hydrology calculations for global climate models (GCMs) - Soil water movement and evapotranspiration

    Science.gov (United States)

    Abramopoulos, F.; Rosenzweig, C.; Choudhury, B.

    1988-01-01

    A physically based ground hydrology model is presented that includes the processes of transpiration, evaporation from intercepted precipitation and dew, evaporation from bare soil, infiltration, soil water flow, and runoff. Data from the Goddard Institute for Space Studies GCM were used as inputs for off-line tests of the model in four 8 x 10 deg regions, including Brazil, Sahel, Sahara, and India. Soil and vegetation input parameters were caculated as area-weighted means over the 8 x 10 deg gridbox; the resulting hydrological quantities were compared to ground hydrology model calculations performed on the 1 x 1 deg cells which comprise the 8 x 10 deg gridbox. Results show that the compositing procedure worked well except in the Sahel, where low soil water levels and a heterogeneous land surface produce high variability in hydrological quantities; for that region, a resolution better than 8 x 10 deg is needed.

  6. Pursuing realistic hydrologic model under SUPERFLEX framework in a semi-humid catchment in China

    Science.gov (United States)

    Wei, Lingna; Savenije, Hubert H. G.; Gao, Hongkai; Chen, Xi

    2016-04-01

    Model realism is pursued perpetually by hydrologists for flood and drought prediction, integrated water resources management and decision support of water security. "Physical-based" distributed hydrologic models are speedily developed but they also encounter unneglectable challenges, for instance, computational time with low efficiency and parameters uncertainty. This study step-wisely tested four conceptual hydrologic models under the framework of SUPERFLEX in a small semi-humid catchment in southern Huai River basin of China. The original lumped FLEXL has hypothesized model structure of four reservoirs to represent canopy interception, unsaturated zone, subsurface flow of fast and slow components and base flow storage. Considering the uneven rainfall in space, the second model (FLEXD) is developed with same parameter set for different rain gauge controlling units. To reveal the effect of topography, terrain descriptor of height above the nearest drainage (HAND) combined with slope is applied to classify the experimental catchment into two landscapes. Then the third one (FLEXTOPO) builds different model blocks in consideration of the dominant hydrologic process corresponding to the topographical condition. The fourth one named FLEXTOPOD integrating the parallel framework of FLEXTOPO in four controlled units is designed to interpret spatial variability of rainfall patterns and topographic features. Through pairwise comparison, our results suggest that: (1) semi-distributed models (FLEXD and FLEXTOPOD) taking precipitation spatial heterogeneity into account has improved model performance with parsimonious parameter set, and (2) hydrologic model architecture with flexibility to reflect perceived dominant hydrologic processes can include the local terrain circumstances for each landscape. Hence, the modeling actions are coincided with the catchment behaviour and close to the "reality". The presented methodology is regarding hydrologic model as a tool to test our

  7. Hydrologic responses of large drainage to clearcutting: a modeling perspective

    Science.gov (United States)

    J. Duan; R. R. Ziemer; G. E. Grant

    1997-01-01

    As forested watersheds become more intensively managed, it is increaseingly important to understand the range of hydrologic impacts in order to maintain the biodiversity and sustainability of these forested systems. Paired-watershed studies are often used to evaluate effects of timber harvest on watershed processes.

  8. Modeling sediment mobilization using a distributed hydrological model coupled with a bank stability model

    Science.gov (United States)

    Stryker, J.; Wemple, B.; Bomblies, A.

    2017-03-01

    In addition to surface erosion, stream bank erosion and failure contributes significant sediment and sediment-bound nutrients to receiving waters during high flow events. However, distributed and mechanistic simulation of stream bank sediment contribution to sediment loads in a watershed has not been achieved. Here we present a full coupling of existing distributed watershed and bank stability models and apply the resulting model to the Mad River in central Vermont. We fully coupled the Bank Stability and Toe Erosion Model (BSTEM) with the Distributed Hydrology Soil Vegetation Model (DHSVM) to allow the simulation of stream bank erosion and potential failure in a spatially explicit environment. We demonstrate the model's ability to simulate the impacts of unstable streams on sediment mobilization and transport within a watershed and discuss the model's capability to simulate watershed sediment loading under climate change. The calibrated model simulates total suspended sediment loads and reproduces variability in suspended sediment concentrations at watershed and subbasin outlets. In addition, characteristics such as land use and road-to-stream ratio of subbasins are shown to impact the relative proportions of sediment mobilized by overland erosion, erosion of roads, and stream bank erosion and failure in the subbasins and watershed. This coupled model will advance mechanistic simulation of suspended sediment mobilization and transport from watersheds, which will be particularly valuable for investigating the potential impacts of climate and land use changes, as well as extreme events.

  9. Model-grid and hydraulic-property data arrays of the MULT package of the Central Valley Hydrologic Model

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital dataset defines the model-grid and hydraulic-property data arrays of the Multiplier (MULT) Package used in the transient hydrologic model of the Central...

  10. Improving evapotranspiration processes in distrubing hydrological models using Remote Sensing derived ET products.

    Science.gov (United States)

    Abitew, T. A.; van Griensven, A.; Bauwens, W.

    2015-12-01

    Evapotranspiration is the main process in hydrology (on average around 60%), though has not received as much attention in the evaluation and calibration of hydrological models. In this study, Remote Sensing (RS) derived Evapotranspiration (ET) is used to improve the spatially distributed processes of ET of SWAT model application in the upper Mara basin (Kenya) and the Blue Nile basin (Ethiopia). The RS derived ET data is obtained from recently compiled global datasets (continuously monthly data at 1 km resolution from MOD16NBI,SSEBop,ALEXI,CMRSET models) and from