WorldWideScience

Sample records for machines school stores

  1. Availability of Vending Machines and School Stores in California Schools

    Science.gov (United States)

    Cisse-Egbuonye, Nafissatou; Liles, Sandy; Schmitz, Katharine E.; Kassem, Nada; Irvin, Veronica L.; Hovell, Melbourne F.

    2016-01-01

    Background: This study examined the availability of foods sold in vending machines and school stores in United States public and private schools, and associations of availability with students' food purchases and consumption. Methods: Descriptive analyses, chi-square tests, and Spearman product-moment correlations were conducted on data collected…

  2. State but not district nutrition policies are associated with less junk food in vending machines and school stores in US public schools.

    Science.gov (United States)

    Kubik, Martha Y; Wall, Melanie; Shen, Lijuan; Nanney, Marilyn S; Nelson, Toben F; Laska, Melissa N; Story, Mary

    2010-07-01

    Policy that targets the school food environment has been advanced as one way to increase the availability of healthy food at schools and healthy food choice by students. Although both state- and district-level policy initiatives have focused on school nutrition standards, it remains to be seen whether these policies translate into healthy food practices at the school level, where student behavior will be impacted. To examine whether state- and district-level nutrition policies addressing junk food in school vending machines and school stores were associated with less junk food in school vending machines and school stores. Junk food was defined as foods and beverages with low nutrient density that provide calories primarily through fats and added sugars. A cross-sectional study design was used to assess self-report data collected by computer-assisted telephone interviews or self-administered mail questionnaires from state-, district-, and school-level respondents participating in the School Health Policies and Programs Study 2006. The School Health Policies and Programs Study, administered every 6 years since 1994 by the Centers for Disease Control and Prevention, is considered the largest, most comprehensive assessment of school health policies and programs in the United States. A nationally representative sample (n=563) of public elementary, middle, and high schools was studied. Logistic regression adjusted for school characteristics, sampling weights, and clustering was used to analyze data. Policies were assessed for strength (required, recommended, neither required nor recommended prohibiting junk food) and whether strength was similar for school vending machines and school stores. School vending machines and school stores were more prevalent in high schools (93%) than middle (84%) and elementary (30%) schools. For state policies, elementary schools that required prohibiting junk food in school vending machines and school stores offered less junk food than

  3. WATER-JET CUTTING MACHINE NOW AVAILABLE FROM THE CERN RAW MATERIALS STORES

    CERN Document Server

    2007-01-01

    The CERN Raw Materials Stores has recently acquired a new water-jet cutting machine. The machine is capable of cutting all types and shapes of materials up to 70 mm in thickness, with an accuracy of +/- 0.1mm/m. For the time being, users requiring materials to be cut should supply drawings in DXF, DWG or IGES (AutoCad) file format. The machine will be operational as of 1st October 2007. The Stores Team Paulo Dos Santos FI-LS-MM 72308

  4. WATER-JET CUTTING MACHINE NOW AVAILABLE FROM THE CERN RAW MATERIALS STORES

    CERN Multimedia

    2007-01-01

    The CERN Raw Materials Stores has recently acquired a new water-jet cutting machine. The machine is capable of cutting all types and shapes of materials up to 70 mm in thickness, with an accuracy of +/- 0.1mm/m. For the time being, users requiring materials to be cut should supply drawings in DXF, DWG or IGES (AutoCad) file format. The machine will be operational as of 1st October 2007. The Stores Team Paulo Dos Santos FI-LS-MM 72308

  5. Risk and Machine Protection for Stored Magnetic and Beam Energies

    CERN Document Server

    Todd, B

    2015-01-01

    Risk is a fundamental consideration when designing electronic systems. For most systems a view of risk can assist in setting design objectives, whereas both a qualitative and quantitative understanding of risk is mandatory when considering protection systems. This paper gives an overview of the risks due to stored magnetic and beam energies in high-energy physics, and shows how a risk-based approach can be used to design new systems mitigating these risks, using a lifecycle inspired by IEC 61508. Designing new systems in high-energy physics can be challenging as new and novel techniques are difficult to quantify and predict. This paper shows how the same lifecycle approach can be used in reverse to analyse existing systems, following their operation and first experiences.

  6. Learning Experiences for Mentally Handicapped Students in a School Store.

    Science.gov (United States)

    David, Carol

    A supermarket chain supplies a small grocery store in an elementary school in Jefferson County, Kentucky. The store program seeks to provide learning experiences for students, as they make selections, spend their earnings, and save for later purchases. Students with multiple handicaps and students with severe/profound handicaps shop in the store…

  7. Snack food advertising in stores around public schools in Guatemala.

    Science.gov (United States)

    Chacon, Violeta; Letona, Paola; Villamor, Eduardo; Barnoya, Joaquin

    Obesity in school-age children is emerging as a public heath concern. Food marketing influences preferences and increases children's requests for food. This study sought to describe the type of snack foods advertised to children in stores in and around public schools and assess if there is an association between child-oriented snack food advertising and proximity to schools. All food stores located inside and within a 200 square meter radius from two preschools and two primary schools were surveyed. We assessed store type, number and type of snack food advertisements including those child-oriented inside and outside stores. We surveyed 55 stores and found 321 snack food advertisements. Most were on sweetened beverages (37%) and soft drinks (30%). Ninety-two (29%) were child-oriented. Atoles (100.0%), cereals (94.1%), and ice cream and frozen desserts (71.4%) had the greatest proportion of child-oriented advertising. We found more child-oriented advertisements in stores that were closer (stores within a short walking distance from schools, exposing children to an obesogenic environment.

  8. A Mixed Message: The School Vending Machine.

    Science.gov (United States)

    Hinkle, Margaret Murray

    1982-01-01

    Dental disease, especially tooth decay, is reaching epidemic proportions among children of school age. Since sugar is a major cause of tooth decay and since many confections are sold in schools, it is recommended that schools remove confections and other nonnutritional food items from vending machines, fund-raising activities, and food services.…

  9. Stores

    CERN Multimedia

    2004-01-01

    Following the introduction of Condensators, resistors and potentiometers from the Farnell electronic-catalogue into CERN Stores' catalogue, following products are now available: PRODUCT FAMILY GROUP SCEM Oscillators and quartz crystals 07.94.10 / 07.94.12 Diodes 08.51.14 / 08.51.54 Thyristors 08.51.60 / 08.51.66 Opto-electronics 08.52 Transistors 08.53 Integrated circuits 08.54 / 08.55 These articles can be procured in the same way as any other stores item, by completing a Material Request. N.B. Individual Farnell order codes can be used as keywords to facilitate searches in the CERN Stores Catalogue.

  10. The School Store...Making It Work. Sales, Operations, Merchandising, Management, Accounting, Advertising & Display.

    Science.gov (United States)

    Michigan Univ., Ann Arbor. School of Education.

    This guide was developed to provide specific, practical advice to teachers who are involved in operating a school store as an adjunct to the marketing/distributive education curriculum. The handbook format integrates school store operations with classroom learning activities and the Michigan Marketing and Distributive Education Core Curriculum.…

  11. State sales tax rates for soft drinks and snacks sold through grocery stores and vending machines, 2007.

    Science.gov (United States)

    Chriqui, Jamie F; Eidson, Shelby S; Bates, Hannalori; Kowalczyk, Shelly; Chaloupka, Frank J

    2008-07-01

    Junk food consumption is associated with rising obesity rates in the United States. While a "junk food" specific tax is a potential public health intervention, a majority of states already impose sales taxes on certain junk food and soft drinks. This study reviews the state sales tax variance for soft drinks and selected snack products sold through grocery stores and vending machines as of January 2007. Sales taxes vary by state, intended retail location (grocery store vs. vending machine), and product. Vended snacks and soft drinks are taxed at a higher rate than grocery items and other food products, generally, indicative of a "disfavored" tax status attributed to vended items. Soft drinks, candy, and gum are taxed at higher rates than are other items examined. Similar tax schemes in other countries and the potential implications of these findings relative to the relationship between price and consumption are discussed.

  12. Convenience stores surrounding urban schools: an assessment of healthy food availability, advertising, and product placement.

    Science.gov (United States)

    Gebauer, Hilary; Laska, Melissa Nelson

    2011-08-01

    Adolescent obesity is a national public health problem, particularly among urban populations. Recent evidence has linked neighborhood food environments to health and nutrition status, with easier access to convenience stores being associated with increased risk for obesity. Little is known about the availability of healthy purchasing options within small, urban food stores, or the extent to which these factors are relevant to youth. The objective of this research was to characterize various features of the food environment within small convenience stores located nearby urban junior high and high schools. In-store audits were conducted in 63 stores located within 800 m of 36 urban Minnesota public secondary schools. Results indicated that a limited number of healthier beverages (i.e., water and 100% fruit juice) and snack options (i.e., nuts and pretzels) were available at most stores (≥85%). However, a wide range of healthy snack options were typically not available, with many specific items stocked in less than half of stores (e.g., low-fat yogurt in 27% of stores and low-fat granola bars in 43%). Overall, 51% of stores had fresh fruit and 49% had fresh vegetables. Few stores carried a range of healthier snack alternatives in single-serving packages. All stores had less healthful impulse purchase items available (e.g., candy) while only 46% carried healthier impulse items (e.g., fruit). Most stores (97%) had food/beverage advertising. Overall, convenience stores located in close proximity to secondary schools represent an important and understudied component of the youth food environment.

  13. Modelling In-Store Consumer Behaviour Using Machine Learning and Digital Signage Audience Measurement Data

    OpenAIRE

    Ravnik, Robert; Solina, Franc; Žabkar, Vesna

    2014-01-01

    Audience adaptive digital signage is a new emerging tech- nology, where public broadcasting displays adapt their content to the audience demographic and temporal features. The collected audience measurement data can be used as a unique basis for statistical analysis of viewing patterns, interactive display applications and also for further research and observer modelling. Here, we use machine learning methods on real-world digital signage viewership data to predict consumer behav- iour in a r...

  14. Location of Food Stores Near Schools Does Not Predict the Weight Status of Maine High School Students

    Science.gov (United States)

    Harris, David E.; Blum, Janet Whatley; Bampton, Matthew; O'Brien, Liam M.; Beaudoin, Christina M.; Polacsek, Michele; O'Rourke, Karen A.

    2011-01-01

    Objective: To examine the relationship between stores selling calorie-dense food near schools and student obesity risk, with the hypothesis that high availability predicts increased risk. Methods: Mail surveys determined height, weight, and calorie-dense food consumption for 552 students at 11 Maine high schools. Driving distance from all food…

  15. Location of Food Stores Near Schools Does Not Predict the Weight Status of Maine High School Students

    Science.gov (United States)

    Harris, David E.; Blum, Janet Whatley; Bampton, Matthew; O'Brien, Liam M.; Beaudoin, Christina M.; Polacsek, Michele; O'Rourke, Karen A.

    2011-01-01

    Objective: To examine the relationship between stores selling calorie-dense food near schools and student obesity risk, with the hypothesis that high availability predicts increased risk. Methods: Mail surveys determined height, weight, and calorie-dense food consumption for 552 students at 11 Maine high schools. Driving distance from all food…

  16. 2nd Machine Learning School for High Energy Physics

    CERN Document Server

    2016-01-01

    The Second Machine Learning summer school organized by Yandex School of Data Analysis and Laboratory of Methods for Big Data Analysis of National Research University Higher School of Economics will be held in Lund, Sweden from 20 to 26 June 2016. It is hosted by Lund University. The school is intended to cover the relatively young area of data analysis and computational research that has started to emerge in High Energy Physics (HEP). It is known by several names including “Multivariate Analysis”, “Neural Networks”, “Classification/Clusterization techniques”. In more generic terms, these techniques belong to the field of “Machine Learning”, which is an area that is based on research performed in Statistics and has received a lot of attention from the Data Science community. There are plenty of essential problems in High energy Physics that can be solved using Machine Learning methods. These vary from online data filtering and reconstruction to offline data analysis. Students of the school w...

  17. Fast-food outlets and grocery stores near school and adolescents' eating habits and overweight in Finland

    National Research Council Canada - National Science Library

    Virtanen, Marianna; Kivimäki, Hanne; Ervasti, Jenni; Oksanen, Tuula; Pentti, Jaana; Kouvonen, Anne; Halonen, Jaana I; Kivimäki, Mika; Vahtera, Jussi

    2015-01-01

    .... However, the contribution of school neighbourhood environment is poorly understood. This study examined the association between proximity of a fast-food outlet or grocery store to school and adolescents' eating habits and overweight...

  18. Food Availability in School Stores in Seoul, South Korea after Implementation of Food- and Nutrient-Based Policies

    Science.gov (United States)

    Choi, Seul Ki; Frongillo, Edward A.; Blake, Christine E.; Thrasher, James F.

    2017-01-01

    Background: To improve school store food environments, the South Korean government implemented 2 policies restricting unhealthy food sales in school stores. A food-based policy enacted in 2007 restricts specific food sales (soft drinks); and a nutrient-based policy enacted in 2009 restricts energy-dense and nutrient-poor (EDNP) food sales. The…

  19. CAS - CERN Accelerator School: Course on High Power Hadron Machines

    CERN Document Server

    2013-01-01

    These proceedings collate lectures given at the twenty-fifth specialized course organised by the CERN Accelerator School (CAS). The course was held in Bilbao, Spain from 24 May to 2 June 2011, in collaboration with ESS Bilbao. The course covered the background accelerator physics, different types of particle accelerators and the underlying accelerator systems and technologies, all from the perspective of high beam power. The participants pursued one of six case studies in order to get “hands-on” experience of the issues connected with high power machines.

  20. Impact of the HEALTHY Study on Vending Machine Offerings in Middle Schools

    Science.gov (United States)

    Hartstein, Jill; Cullen, Karen W.; Virus, Amy; El Ghormli, Laure; Volpe, Stella L.; Staten, Myrlene A.; Bridgman, Jessica C.; Stadler, Diane D.; Gillis, Bonnie; McCormick, Sarah B.; Mobley, Connie C.

    2011-01-01

    Purpose/Objectives: The purpose of this study is to report the impact of the three-year middle school-based HEALTHY study on intervention school vending machine offerings. There were two goals for the vending machines: serve only dessert/snack foods with 200 kilocalories or less per single serving package, and eliminate 100% fruit juice and…

  1. Microbial quality of soft drinks served by the dispensing machines in fast food restaurants and convenience stores in Griffin, Georgia, and surrounding areas.

    Science.gov (United States)

    Park, Yoen Ju; Chen, Jinru

    2009-12-01

    This study was undertaken to evaluate the microbial quality of the soft drinks served by fast food restaurants and gas station convenience stores in Griffin, GA, and surrounding areas. The soft drinks were collected from the dispensing machines in 8 fast food restaurants or gas station convenience stores in 2005 (n = 25) and in 10 fast food restaurants or gas station convenience stores in 2006 (n = 43) and 2007 (n = 43). One hundred milliliters of each soft drink was filtered through a hydrophobic grid membrane filter. The remaining portion of the soft drink was kept at room temperature for 4 h before sampling in order to mimic the possible holding time between purchase and consumption. The membrane filters were sampled for total aerobic bacteria, Enterobacteriaceae, lactic acid bacteria, and yeasts and molds. The microbial counts in the 2006 samples were numerically higher than the counts in the 2007 samples except for the average lactic acid bacteria counts, and were either significantly or numerically higher than the counts in the 2005 samples. Soft drinks sampled after the 4-h holding period had relatively higher counts than those sampled initially, with a few exceptions. Some soft drinks had over 4 log CFU/100 ml of total aerobic bacteria, Enterobacteriaceae, lactic acid bacteria, and yeast and mold cells. The study revealed the microbial quality of soft drinks served by dispensing machines in Griffin, GA, and surrounding areas, emphasizing the importance of effective sanitizing practice in retail settings.

  2. Associations between Parental Limits, School Vending Machine Purchases, and Soft Drink Consumption among Kentucky Middle School Students

    Science.gov (United States)

    Nickelson, Jen; Roseman, Mary G.; Forthofer, Melinda S.

    2010-01-01

    Objective: To examine associations between parental limits on soft drinks and purchasing soft drinks from school vending machines and consuming soft drinks among middle school students. Design: Secondary analysis of cross-sectional data from the middle school Youth Risk Behavior Survey. Setting: Eight public middle schools in central Kentucky.…

  3. Fast-food outlets and grocery stores near school and adolescents' eating habits and overweight in Finland.

    Science.gov (United States)

    Virtanen, Marianna; Kivimäki, Hanne; Ervasti, Jenni; Oksanen, Tuula; Pentti, Jaana; Kouvonen, Anne; Halonen, Jaana I; Kivimäki, Mika; Vahtera, Jussi

    2015-08-01

    Environmental factors may affect adolescents' eating habits and thereby body weight. However, the contribution of school neighbourhood environment is poorly understood. This study examined the association between proximity of a fast-food outlet or grocery store to school and adolescents' eating habits and overweight. Participants were 23 182 adolescents (mean age 15 years) who responded to a classroom survey in 181 lower secondary schools in Finland (2008-09). School location was linked to data on distance from school to the nearest fast-food outlet or grocery store (≤100 m, 101-500 m, >500 m) using global positioning system-coordinate databases. Outcomes were irregular eating habits (skipping breakfast, skipping free school lunch, skipping free school-provided snacks and not having family dinners), the accumulation of these habits and overweight, including obesity (body mass index ≥ 25 kg/m(2)). Thirteen percentage of the participants were overweight. Having a fast-food outlet or grocery store near school was associated with skipping often breakfast and free school lunch, and the accumulation of irregular eating habits. The proximity of a fast-food outlet or grocery store was associated with a 1.25-fold (95% confidence interval 1.03-1.52) risk of overweight among adolescent with a low socioeconomic status but not among those with higher socioeconomic status. This association was partly (12%) explained by the accumulation of irregular eating habits. Among adolescents from low socioeconomic background, the presence of fast-food retailers near schools is associated with accumulation of irregular eating habits and greater overweight. These findings suggest that obesogenic school neighbourhoods may contribute to social inequalities in overweight. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  4. Promoting the Purchase of Low-Calorie Foods from School Vending Machines: A Cluster-Randomized Controlled Study

    Science.gov (United States)

    Kocken, Paul L.; Eeuwijk, Jennifer; van Kesteren, Nicole M.C.; Dusseldorp, Elise; Buijs, Goof; Bassa-Dafesh, Zeina; Snel, Jeltje

    2012-01-01

    Background: Vending machines account for food sales and revenue in schools. We examined 3 strategies for promoting the sale of lower-calorie food products from vending machines in high schools in the Netherlands. Methods: A school-based randomized controlled trial was conducted in 13 experimental schools and 15 control schools. Three strategies…

  5. Availability of healthy snack foods and beverages in stores near high-income urban, low-income urban, and rural elementary and middle schools in Oregon.

    Science.gov (United States)

    Findholt, Nancy E; Izumi, Betty T; Nguyen, Thuan; Pickus, Hayley; Chen, Zunqiu

    2014-08-01

    Food stores near schools are an important source of snacks for children. However, few studies have assessed availability of healthy snacks in these settings. The aim of this study was to assess availability of healthy snack foods and beverages in stores near schools and examine how availability of healthy items varied by poverty level of the school and rural-urban location. Food stores were selected based on their proximity to elementary/middle schools in three categories: high-income urban, low-income urban, and rural. Audits were conducted within the stores to assess the presence or absence of 48 items in single-serving sizes, including healthy beverages, healthy snacks, fresh fruits, and fresh vegetables. Overall, availability of healthy snack foods and beverages was low in all stores. However, there was significant cross-site variability in availability of several snack and fruit items, with stores near high-income urban schools having higher availability, compared to stores near low-income urban and/or rural schools. Stores near rural schools generally had the lowest availability, although several fruits were found more often in rural stores than in urban stores. There were no significant differences in availability of healthy beverages and fresh vegetables across sites. Availability of healthy snack foods and beverages was limited in stores near schools, but these limitations were more severe in stores proximal to rural and low-income schools. Given that children frequent these stores to purchase snacks, efforts to increase the availability of healthy products, especially in stores near rural and low-income schools, should be a priority.

  6. Introducing systems change in the schools: the case of school luncheons and vending machines.

    Science.gov (United States)

    Suarez-Balcazar, Yolanda; Redmond, Ladonna; Kouba, Joanne; Hellwig, Maureen; Davis, Rochelle; Martinez, Louise I; Jones, Lara

    2007-06-01

    A major public health crisis facing America's society is the increase in child and youth obesity, which has seen a fourfold increase in the last four decades. Major concerns include what children eat for school lunch and what other foods are available in schools. This paper illustrates efforts towards systems change in the luncheon program and food vending machines in the Chicago Public Schools. We discuss the different factors that lead to such changes using the framework of the social ecological model and the soft systems methodology, and we analyze how the resulting innovation was implemented and evaluated. First, we present a theoretical perspective to explain factors that influence children's eating patterns from a systems approach. Second, we discuss the antecedent factors that lead to systems change. Finally, we examine challenges to systems change, such as resistance to change, different stakeholder priorities, lack of resources, institutional bureaucracy, and unrealistic funder expectations.

  7. Fluoride stability in dentifrices stored in schools in a town of northern Brazil

    Directory of Open Access Journals (Sweden)

    Jéssica Bandeira MATIAS

    2015-01-01

    Full Text Available The aim of this study was to analyze fluoride stability in dentifrices stored during nine months in schools from Careiro da Várzea, State of Amazonas, Brazil. Analysis of total fluoride concentration, total soluble fluoride, and ionic fluoride in the dentifrice samples was performed in four different time periods: at the time of purchase (baseline; after three months, after six months, and after nine months of storage. Fluoride concentration was determined using a specific electrode (Orion 96-09 connected to an ion analyzer (Orion A-720 and calibrated with fluoride standard solutions containing 2.0 to 32.0 ppm F. The results obtained during the measurements were analyzed by analysis of variance (one-way ANOVA, followed by Tukey’s test for comparison of the means. After nine months of storage, total soluble fluoride, the active form of fluoride, decreased by 21.9%. As total soluble fluoride was below the minimum required for anticaries efficacy (1,000 ppm F in the fourth analysis, it may be concluded that anticaries potential decreased with storage time.

  8. Promoting the purchase of low-calorie foods from school vending machines: A cluster-randomized controlled study

    NARCIS (Netherlands)

    Kocken, P.L.; Eeuwijk, J.; Kesten, N.M.C. van; Dusseldorp, E.; Buijs, G.; Bassa-Dafesh, Z.; Snel, J.

    2012-01-01

    BACKGROUND: Vending machines account for food sales and revenue in schools. We examined 3 strategies for promoting the sale of lower-calorie food products from vending machines in high schools in the Netherlands. METHODS: A school-based randomized controlled trial was conducted in 13 experimental

  9. Adherence to nutritional recommendations in vending machines at secondary schools in Madrid (Spain), 2014-2015.

    Science.gov (United States)

    Monroy-Parada, Doris Xiomara; Jácome-González, María Luisa; Moya-Geromini, María Ángeles; Rodríguez-Artalejo, Fernando; Royo-Bordonada, Miguel Ángel

    2017-07-13

    To describe the nutritional content of products offered in food and drink vending machines at secondary schools in the Madrid Autonomous Community (Spain), and to evaluate these items' adherence to the nutritional recommendations of the National Health System Consensus Document on School Food. Cross-sectional study of a sample of 330 secondary schools in Madrid across the period 2014-2015. Secondary school vending machines were identified by telephone interview. The products offered in a representative sample of six machines were identified by inspection in situ, and their nutritional composition was obtained from the labelling. A total of 94.5% of the 55 products on offer failed to comply with at least one nutritional criterion of the Consensus Document on School Food. The recommendation relating to sugar content registered the highest level of non-compliance, with 52.7% of products, followed by the recommendations relating to energy (47.3%) and fats (45.5%). The mean number of unmet criteria was 2.2, with this figure being higher in foods than in drinks (2.8 versus 1; p <0.01). Almost all the products on display in secondary school vending machines in Madrid were in breach of the Consensus Document on School Food, mainly due to an excess of calories, sugars and fats. Compulsory nutritional criteria and a procedure for monitoring adherence should be established, specifying those responsible for performing this task and the corrective measures to be applied in the event of non-compliance. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  10. Spirulina can increase total-body vitamin A stores of Chinese school-age children as determined by a paired isotope dilution technique

    OpenAIRE

    Li, Lei; Zhao, Xianfeng; Wang, Jie; Muzhingi, Tawanda; Suter, Paolo M.; Tang, Guangwen; Yin, Shi-an

    2012-01-01

    Spirulina is an alga rich in high-quality protein and carotenoids. It is unclear whether spirulina can improve the total-body vitamin A stores of school-age children in China with a high prevalence of vitamin A malnutrition. We aimed to evaluate the efficacy of spirulina in improving the total-body vitamin A stores of school-age children in rural areas of China when they consumed spirulina in their daily meals. A total of 228 children (6–11 years) were recruited and randomly divided into thre...

  11. How State Taxes and Policies Targeting Soda Consumption Modify the Association between School Vending Machines and Student Dietary Behaviors: A Cross-Sectional Analysis

    OpenAIRE

    Taber, Daniel R.; Chriqui, Jamie F.; Renee Vuillaume; Chaloupka, Frank J.

    2014-01-01

    Background: Sodas are widely sold in vending machines and other school venues in the United States, particularly in high school. Research suggests that policy changes have reduced soda access, but the impact of reduced access on consumption is unclear. This study was designed to identify student, environmental, or policy characteristics that modify the associations between school vending machines and student dietary behaviors. Methods: Data on school vending machine access and student diet we...

  12. Spirulina can increase total-body vitamin A stores of Chinese school-age children determined by a paired isotope dilution technique

    Science.gov (United States)

    Spirulina is an alga rich in high-quality protein and carotenoids. It is unclear whether spirulina can improve the total-body vitamin A stores of school-age children in China with a high prevalence of vitamin A malnutrition. We aimed to evaluate the efficacy of spirulina in improving the total-body ...

  13. Prevalence of cigarette advertising and other promotional strategies at the point of sale in St Louis, Missouri: analysis by store type and distance from a school.

    Science.gov (United States)

    Barnoya, Joaquin; Colditz, Graham; Moreland-Russell, Sarah; Cyr, Julianne; Snider, Doneisha; Schootman, Mario

    2014-04-17

    Point-of-sale advertising provides an opportunity for the tobacco industry to communicate with current and potential smokers. The US Family Smoking Prevention and Tobacco Control Act allows states to implement policies requiring that tobacco products be placed out of sight, and the Food and Drug Administration is considering banning point-of-sale advertising within 1,000 feet of schools. Our objective was to compare cigarette point-of-sale advertising near schools with grades prekindergarten through 12 and by store type. All registered cigarette retailers (n = 1,229) and schools (n = 581) in the city of St Louis and St Louis County were geocoded and mapped by using ArcGIS. Retailers were divided into 2 groups, those within 1,000 feet and those within 1,001 to 2,000 feet of a school; 200 retailers from each group were randomly selected. We assessed tobacco interior and exterior advertising, brands advertised, discounts, gifts with purchase, "no sales to minors" signage, and cigarette functional items (eg, advertising on shopping baskets). Analyses were done by distance from a school and store type. We analyzed 340 retailers. Most retailers within 1,000 feet (91.2%) and from 1,001 to 2,000 feet (94.2%) of a school displayed cigarette advertising (P = .20). Convenience stores had the highest number of interior ads. In multivariable models, distance from school explained 0.2% of the variance in total advertising. Cigarette point-of-sale advertising is highly prevalent in St Louis within 1,000 feet of schools. A ban based on distance from a school might decrease advertising exposure, but its effect on smoking prevalence is yet to be determined because advertising farther from schools would still prevail.

  14. Spirulina can increase total-body vitamin A stores of Chinese school-age children as determined by a paired isotope dilution technique.

    Science.gov (United States)

    Li, Lei; Zhao, Xianfeng; Wang, Jie; Muzhingi, Tawanda; Suter, Paolo M; Tang, Guangwen; Yin, Shi-An

    2012-01-01

    Spirulina is an alga rich in high-quality protein and carotenoids. It is unclear whether spirulina can improve the total-body vitamin A stores of school-age children in China with a high prevalence of vitamin A malnutrition. We aimed to evaluate the efficacy of spirulina in improving the total-body vitamin A stores of school-age children in rural areas of China when they consumed spirulina in their daily meals. A total of 228 children (6-11 years) were recruited and randomly divided into three groups supplemented with 4 g (containing 4·18 µg β-carotene), 2 g (containing 2·54 µg β-carotene) or 0 g spirulina 5 d/week for 10 weeks, respectively. Before and after the intervention period, each child was given 0·5 mg [(2)H4]retinyl acetate and [(2)H8]retinyl acetate, respectively. To assess vitamin A stores, blood samples (3 ml) were collected on the third and the twenty-first day after each labelled retinyl acetate dose for a retinol enrichment analysis using a GC mass spectrometer. The concentrations of retinol and β-carotene in serum samples were also determined by using HPLC. After the 10-week intervention, serum β-carotene concentrations of children with 2 or 4 g spirulina supplement increased by 0·160 and 0·389 µmmol/l, respectively. Total-body vitamin A stores increased significantly, with a median increase of 0·160 mmol in children taking 2 g spirulina and of 0·279 mmol in children taking 4 g spirulina. Spirulina is a good dietary source of β-carotene, which may effectively increase the total-body vitamin A stores of Chinese school-age children.

  15. Data-mining to build a knowledge representation store for clinical decision support. Studies on curation and validation based on machine performance in multiple choice medical licensing examinations.

    Science.gov (United States)

    Robson, Barry; Boray, Srinidhi

    2016-06-01

    Extracting medical knowledge by structured data mining of many medical records and from unstructured data mining of natural language source text on the Internet will become increasingly important for clinical decision support. Output from these sources can be transformed into large numbers of elements of knowledge in a Knowledge Representation Store (KRS), here using the notation and to some extent the algebraic principles of the Q-UEL Web-based universal exchange and inference language described previously, rooted in Dirac notation from quantum mechanics and linguistic theory. In a KRS, semantic structures or statements about the world of interest to medicine are analogous to natural language sentences seen as formed from noun phrases separated by verbs, prepositions and other descriptions of relationships. A convenient method of testing and better curating these elements of knowledge is by having the computer use them to take the test of a multiple choice medical licensing examination. It is a venture which perhaps tells us almost as much about the reasoning of students and examiners as it does about the requirements for Artificial Intelligence as employed in clinical decision making. It emphasizes the role of context and of contextual probabilities as opposed to the more familiar intrinsic probabilities, and of a preliminary form of logic that we call presyllogistic reasoning. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. An Approach to the Use of ICT in Machine Sewing Classes Effect of Video Materials in the Elementary School Teacher Training Faculty

    OpenAIRE

    川端, 博子; 祖父江, 仁成; 高橋, 美登梨; 亀崎, 美苗

    2017-01-01

    University students in training faculty for elementary school teaching took lessons in machine sewing using ICT. After learning the basic use of sewing machines, the students sewed small bags referring to the handouts and video materials installed on Tablet PCs. The effects of learning machine sewing, the use of ICT and the points of attention in teaching were considered using the results of the pre and post questionnaires and the evaluation on the small bags sewn. The results are as follows;...

  17. Evaluation of compliance with the self-regulation agreement of the food and drink vending machine sector in primary schools in Madrid, Spain, in 2008.

    Science.gov (United States)

    Royo-Bordonada, Miguel A; Martínez-Huedo, María A

    2014-01-01

    To evaluate compliance with the self-regulation agreement of the food and drink vending machine sector in primary schools in Madrid, Spain. Cross-sectional study of the prevalence of vending machines in 558 primary schools in 2008. Using the directory of all registered primary schools in Madrid, we identified the presence of machines by telephone interviews and evaluated compliance with the agreement by visiting the schools and assessing accessibility, type of publicity, the products offered and knowledge of the agreement. The prevalence of schools with vending machines was 5.8%. None of the schools reported knowledge of the agreement or of its nutritional guidelines, and most machines were accessible to primary school pupils (79.3%) and packed with high-calorie, low-nutrient-dense foods (58.6%). Compliance with the self-regulation agreement of the vending machines sector was low. Stricter regulation should receive priority in the battle against the obesity epidemic. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  18. Iron fortification of whole wheat flour reduces iron deficiency and iron deficiency anemia and increases body iron stores in Indian school-aged children.

    Science.gov (United States)

    Muthayya, Sumithra; Thankachan, Prashanth; Hirve, Siddhivinayak; Amalrajan, Vani; Thomas, Tinku; Lubree, Himangi; Agarwal, Dhiraj; Srinivasan, Krishnamachari; Hurrell, Richard F; Yajnik, Chittaranjan S; Kurpad, Anura V

    2012-11-01

    Wheat is the primary staple food for nearly one-third of the world's population. NaFeEDTA is the only iron (Fe) compound suitable for fortifying high extraction flours. We tested the hypothesis that NaFeEDTA-fortified, whole wheat flour reduces Fe deficiency (ID) and improves body Fe stores (BIS) and cognitive performance in Indian children. In a randomized, double-blind, controlled, school feeding trial, 6- to 15-y-old, Fe-depleted children (n = 401) were randomly assigned to either a daily wheat-based lunch meal fortified with 6 mg of Fe as NaFeEDTA or an otherwise identical unfortified control meal. Hemoglobin (Hb) and Fe status were measured at baseline, 3.5 mo, and 7 mo. Cognitive performance was evaluated at baseline and 7 mo in children (n = 170) at one of the study sites. After 7 mo, the prevalence of ID and ID anemia in the treatment group significantly decreased from 62 to 21% and 18 to 9%, respectively. There was a time x treatment interaction for Hb, serum ferritin, transferrin receptor, zinc protoporphyrin, and BIS (all P children. It may be recommended for wider use in national school feeding programs.

  19. Where are kids getting their empty calories? Stores, schools, and fast food restaurants each play an important role in empty calorie intake among US children in 2009-2010

    Science.gov (United States)

    Poti, Jennifer M.; Slining, Meghan M.; Popkin, Barry M.; Kenan, W.R.

    2013-01-01

    Consumption of empty calories, the sum of energy from added sugar and solid fat, exceeds recommendations, but little is known about where US children obtain these empty calories. The objectives of this study were to compare children's empty calorie consumption from retail food stores, schools, and fast food restaurants; to identify food groups that were top contributors of empty calories from each location; and to determine the location providing the majority of calories for these key food groups. This cross-sectional analysis used data from 3,077 US children aged 2-18 years participating in the 2009-2010 National Health and Nutrition Examination Survey. The empty calorie content of children's intake from stores (33%), schools (32%), and fast food restaurants (35%) was not significantly different in 2009-2010. In absolute terms, stores provided the majority of empty calorie intake (436 kcal). The top contributors of added sugar and solid fat from each location were similar: sugar sweetened beverages (SSBs), grain desserts, and high-fat milk from stores; high-fat milk, grain desserts, and pizza from schools; and SSBs, dairy desserts, french fries, and pizza from fast food restaurants. Schools contributed about 20% of children's intake of high-fat milk and pizza. In conclusion, these findings support the need for continued efforts to reduce empty calorie intake among US children aimed not just at fast food restaurants, but also at stores and schools. The importance of reformed school nutrition standards was suggested, as prior to their implementation, schools resembled fast food restaurants in their contributions to empty calorie intake. PMID:24200654

  20. Where are kids getting their empty calories? Stores, schools, and fast-food restaurants each played an important role in empty calorie intake among US children during 2009-2010.

    Science.gov (United States)

    Poti, Jennifer M; Slining, Meghan M; Popkin, Barry M

    2014-06-01

    Consumption of empty calories, the sum of energy from added sugar and solid fat, exceeds recommendations, but little is known about where US children obtain these empty calories. The objectives of this study were to compare children's empty calorie consumption from retail food stores, schools, and fast-food restaurants; to identify food groups that were top contributors of empty calories from each location; and to determine the location providing the majority of calories for these key food groups. This cross-sectional analysis used data from 3,077 US children aged 2 to 18 years participating in the 2009-2010 National Health and Nutrition Examination Survey. The empty calorie content of children's intake from stores (33%), schools (32%), and fast-food restaurants (35%) was not significantly different in 2009-2010. In absolute terms, stores provided the majority of empty calorie intake (436 kcal). The top contributors of added sugar and solid fat from each location were similar: sugar-sweetened beverages, grain desserts, and high-fat milk∗ from stores; high-fat milk, grain desserts, and pizza from schools; and sugar-sweetened beverages, dairy desserts, french fries, and pizza from fast-food restaurants. Schools contributed about 20% of children's intake of high-fat milk and pizza. These findings support the need for continued efforts to reduce empty calorie intake among US children aimed not just at fast-food restaurants, but also at stores and schools. The importance of reformed school nutrition standards was suggested, as prior to implementation of these changes, schools resembled fast-food restaurants in their contributions to empty calorie intake.

  1. How state taxes and policies targeting soda consumption modify the association between school vending machines and student dietary behaviors: a cross-sectional analysis.

    Directory of Open Access Journals (Sweden)

    Daniel R Taber

    Full Text Available Sodas are widely sold in vending machines and other school venues in the United States, particularly in high school. Research suggests that policy changes have reduced soda access, but the impact of reduced access on consumption is unclear. This study was designed to identify student, environmental, or policy characteristics that modify the associations between school vending machines and student dietary behaviors.Data on school vending machine access and student diet were obtained as part of the National Youth Physical Activity and Nutrition Study (NYPANS and linked to state-level data on soda taxes, restaurant taxes, and state laws governing the sale of soda in schools. Regression models were used to: 1 estimate associations between vending machine access and soda consumption, fast food consumption, and lunch source, and 2 determine if associations were modified by state soda taxes, restaurant taxes, laws banning in-school soda sales, or student characteristics (race/ethnicity, sex, home food access, weight loss behaviors..Contrary to the hypothesis, students tended to consume 0.53 fewer servings of soda/week (95% CI: -1.17, 0.11 and consume fast food on 0.24 fewer days/week (95% CI: -0.44, -0.05 if they had in-school access to vending machines. They were also less likely to consume soda daily (23.9% vs. 27.9%, average difference  =  -4.02, 95% CI: -7.28, -0.76. However, these inverse associations were observed primarily among states with lower soda and restaurant tax rates (relative to general food tax rates and states that did not ban in-school soda sales. Associations did not vary by any student characteristics except for weight loss behaviors.Isolated changes to the school food environment may have unintended consequences unless policymakers incorporate other initiatives designed to discourage overall soda consumption.

  2. Store Tours: Accessing Museums’ Stored Collections

    Directory of Open Access Journals (Sweden)

    Lucinda G. Caesar

    2007-11-01

    Full Text Available In the Science Museum, London, it is envisioned that the future of the collection lies with the creation of an open storage centre, a means to ensure that its stored collections become a permanent way of engagement with the public. Access to stored collections is a topical subject, and open storage has been adopted by many museums as an access strategy. This report explores the use of a particular interpretation method: guided tours of the stores. Are store tours a worthwhile investment? Should store tours be used as an interpretative medium for accessing stored collections on a national level? Are store tours the best tool to engage the public in stored collections? What do store tours provide as a means of accessing or promoting engagement in museum’s stored collections? Are they indeed the access tool of the future? This paper reviews these questions, drawing on the data from a series of store tours hosted in 2004 and 2005 by the Science Museum, London.

  3. "Nutritional Wastelands": Vending Machines, Fast Food Outlets, and the Fight over Junk Food in Canadian Schools.

    Science.gov (United States)

    Gidney, Catherine

    2015-01-01

    In light of a growing obesity crisis among children and concern about junk food in schools, this article investigates the attempt by food and beverage companies to gain entry into Canadian schools. Focusing in particular on the introduction of fast-food franchises in cafeterias and on school boards' secret exclusivity deals with soft drink manufacturers in the 1990s, it examines how and why this process occurred, public reactions to it, and government responses. Placing this phenomenon within a larger pattern of commercialization in North American schools, it argues that long-lasting reforms require government intervention and enforcement.

  4. Are School Vending Machines Loaded with Calories and Fat: An Assessment of 106 Middle and High Schools

    Science.gov (United States)

    Pasch, Keryn E.; Lytle, Leslie A.; Samuelson, Anne C.; Farbakhsh, Kian; Kubik, Martha Y.; Patnode, Carrie D.

    2011-01-01

    Background: The purpose of this study was to describe the extent to which vending offerings in 106 schools in the St. Paul-Minneapolis, Minnesota metropolitan area, met criteria for types of beverages, fat, and calories based on selected criteria offered by the Institute of Medicine. Methods: Schools where youth participants were attending for the…

  5. TO STORES USERS

    CERN Multimedia

    SPL Division

    2001-01-01

    Stores users are informed that the Stores (Central, Emergency window, Raw materials, Chemical products and Prévessin Self service stores) will be closed on Friday, 7 December owing to migration of the Stores computers to Windows 2000. Thank you for your understanding.

  6. [Limits of self regulation of the private food sector: the case of removing of vending machines from schools].

    Science.gov (United States)

    Michaud, Claude; Baudier, François

    2007-01-01

    Conflicts of interest between the food industry and public decision makers have increasingly multiplied over the last few years, especially within the context of implementing the French National Nutrition Programme. This paper describes the rhetoric and the strategies developed by the private sector in order to counter the law's implementation and enforcement based on a concrete example, namely, the removal of vending machines from schools. After having evoked possibilities of developing new partnerships as suggested by national and international health authorities, it reaffirms the right and the duty of the State to regulate within the framework of a health promotion policy, an approach which integrates the necessary open democratic public debate between the different sectors.

  7. The use of point-of-sale machines in school cafeterias as a method of parental influence over child lunch food choices

    Science.gov (United States)

    Computerized point-of-sale (POS) machine software that allows parents to place restrictions on their child’s school meal accounts is available. Parents could restrict specific foods (eg, chips), identify specific days the child can purchase extra foods, or set monetary limits. This descriptive study...

  8. The Use of Point-of-Sale Machines in School Cafeterias as a Method of Parental Influence over Child Lunch Food Choices

    Science.gov (United States)

    Andrepont, Emmy; Cullen, Karen W.; Taylor, Wendell C.

    2011-01-01

    Background: Computerized point-of-sale (POS) machine software that allows parents to place restrictions on their child's school meal accounts is available. Parents could restrict specific foods (e.g., chips), identify specific days the child can purchase extra foods, or set monetary limits. This descriptive study examines the use of parental…

  9. The Use of Point-of-Sale Machines in School Cafeterias as a Method of Parental Influence over Child Lunch Food Choices

    Science.gov (United States)

    Andrepont, Emmy; Cullen, Karen W.; Taylor, Wendell C.

    2011-01-01

    Background: Computerized point-of-sale (POS) machine software that allows parents to place restrictions on their child's school meal accounts is available. Parents could restrict specific foods (e.g., chips), identify specific days the child can purchase extra foods, or set monetary limits. This descriptive study examines the use of parental…

  10. Corner stores: the perspective of urban youth.

    Science.gov (United States)

    Sherman, Sandra; Grode, Gabrielle; McCoy, Tara; Vander Veur, Stephanie S; Wojtanowski, Alexis; Sandoval, Brianna Almaguer; Foster, Gary D

    2015-02-01

    We examined the perspectives of low-income, urban youth about the corner store experience to inform the development of corner store interventions. Focus groups were conducted to understand youth perceptions regarding their early shopping experiences, the process of store selection, reasons for shopping in a corner store, parental guidance about corner stores, and what their ideal, or "dream corner store" would look like. Thematic analysis was employed to identify themes using ATLAS.ti (version 6.1, 2010, ATLAS.ti GmbH) and Excel (version 2010, Microsoft Corp). Focus groups were conducted in nine kindergarten-through-grade 8 (K-8) public schools in low-income neighborhoods with 40 fourth- to sixth-graders with a mean age of 10.9±0.8 years. Youth report going to corner stores with family members at an early age. By second and third grades, a growing number of youth reported shopping unaccompanied by an older sibling or adult. Youth reported that the products sold in stores were the key reason they choose a specific store. A small number of youth said their parents offered guidance on their corner store purchases. When youth were asked what their dream corner store would look like, they mentioned wanting a combination of healthy and less-healthy foods. These data suggest that, among low-income, urban youth, corner store shopping starts at a very young age and that product, price, and location are key factors that affect corner store selection. The data also suggest that few parents offer guidance about corner store purchases, and youth are receptive to having healthier items in corner stores. Corner store intervention efforts should target young children and their parents/caregivers and aim to increase the availability of affordable, healthier products. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  11. Engineering-Based Problem Solving in the Middle School: Design and Construction with Simple Machines

    Science.gov (United States)

    English, Lyn D.; Hudson, Peter; Dawes, Les

    2013-01-01

    Incorporating engineering concepts into middle school curriculum is seen as an effective way to improve students' problem-solving skills. A selection of findings is reported from a science, technology, engineering and mathematics (STEM)-based unit in which students in the second year (grade 8) of a three-year longitudinal study explored…

  12. Just Working with the Cellular Machine: A High School Game for Teaching Molecular Biology

    Science.gov (United States)

    Cardoso, Fernanda Serpa; Dumpel, Renata; Gomes da Silva, Luisa B.; Rodrigues, Carlos R.; Santos, Dilvani O.; Cabral, Lucio Mendes; Castro, Helena C.

    2008-01-01

    Molecular biology is a difficult comprehension subject due to its high complexity, thus requiring new teaching approaches. Herein, we developed an interdisciplinary board game involving the human immune system response against a bacterial infection for teaching molecular biology at high school. Initially, we created a database with several…

  13. Soft Drink Vending Machines in Schools: A Clear and Present Danger

    Science.gov (United States)

    Price, James; Murnan, Judy; Moore, Bradene

    2006-01-01

    This paper examines the availability of soft drinks in schools ("pouring rights contracts") and its effects on the growing nutritional problems of American youth. Of special concern is the prevalence of overweight youth, which has been increasing at alarming rates. There has been a direct relationship found between soft drink consumption and…

  14. Predicting Commissary Store Success

    Science.gov (United States)

    2014-12-01

    goods, such as butter, flour , meat and cheese. Commissary pricing for some stores (Offut Air Force Base, Travis Air Force Base and Fort Belvoir...commissary stores worldwide with total sales of $5.9 billion. Commissary stores carry a wide selection of products including grocery, dry goods, meat

  15. NACS Store Planning Manual.

    Science.gov (United States)

    College Store Journal, 1979

    1979-01-01

    Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

  16. Machine Protection

    CERN Document Server

    Schmidt, R

    2014-01-01

    The protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent. It is related to the increasing beam power of high-power proton accelerators such as ISIS, SNS, ESS and the PSI cyclotron, to the emission of synchrotron light by electron–positron accelerators and FELs, and to the increase of energy stored in the beam (in particular for hadron colliders such as LHC). Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping the beam at low energy) and an ...

  17. Trends in exposure to pro-tobacco advertisements over the Internet, in newspapers/magazines, and at retail stores among U.S. middle and high school students, 2000-2012.

    Science.gov (United States)

    Agaku, Israel T; King, Brian A; Dube, Shanta R

    2014-01-01

    Most tobacco use begins during youth. Thus, this study assessed the prevalence, trends, and correlates of pro-tobacco advertising among United States students in grades 6-12 during 2000-2012. Data from the 2000-2012 National Youth Tobacco Survey were analyzed to assess self-reported exposure to pro-tobacco advertisements through three media: over the Internet, in newspapers/magazines, and at retail stores. Trends during 2000-2012 were assessed in a binary logistic regression model (Padvertisements increased from 22.3% to 43.0% during 2000-2012 (Padvertisements in newspapers/magazines (65.0% to 36.9%) and at retail stores (87.8% to 76.2%) (Padvertisements over the Internet increased significantly during 2000-2012 among United States middle and high school students, while a decline in exposure to advertisements in newspapers or magazines, and at retail stores occurred during the same period. However, over two-thirds of students still reported retail store exposure to pro-tobacco advertisements in 2012. Enhanced and sustained efforts would be beneficial to reduce even more exposure to all forms of pro-tobacco advertisements among youths. © 2013.

  18. Mi Quinto Libro de Maquinas Simples: El Plano Inclinado. Escuela Intermedia Grados 7, 8 y 9 (My Fifth Book of Simple Machines: The Inclined Plane. Intermediate School Grades 7, 8, and 9).

    Science.gov (United States)

    Alvarado, Patricio R.; Montalvo, Luis

    This is the fifth book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains the principles and some of the uses of inclined planes, as they appear in simple machines, by suggesting experiments and posing questions concerning drawings in the book…

  19. When Machines Design Machines!

    DEFF Research Database (Denmark)

    2011-01-01

    Until recently we were the sole designers, alone in the driving seat making all the decisions. But, we have created a world of complexity way beyond human ability to understand, control, and govern. Machines now do more trades than humans on stock markets, they control our power, water, gas...... and food supplies, manage our elevators, microclimates, automobiles and transport systems, and manufacture almost everything. It should come as no surprise that machines are now designing machines. The chips that power our computers and mobile phones, the robots and commercial processing plants on which we...... depend, all are now largely designed by machines. So what of us - will be totally usurped, or are we looking at a new symbiosis with human and artificial intelligences combined to realise the best outcomes possible. In most respects we have no choice! Human abilities alone cannot solve any of the major...

  20. Information for Stores Users

    CERN Multimedia

    Logistics Group

    2004-01-01

    As the FARNELL Catalogue CAPACITORS, RESISTORS and POTENTIOMETERS have now been integrated into the CERN Stores Catalogue (SCEM Groups 10 and 11) they can now be obtained via an EDH 'Material Request' like any other Stores item. N.B. The Farnell 'Order code' is one of the key-words that make it easier to find items in the Stores Catalogue. Logistics Group FI Department

  1. Information for stores users

    CERN Multimedia

    Logistics Group - FI Department

    2005-01-01

    The Farnell catalogue can now be accessed from the Material Request form on EDH in addition to the CERN Stores catalogue. Users can order Farnell equipment as well as standard Stores equipment at the same time using a single document, the EDH Materials Request form. The Materials Request form offers users items from both the internal 'Stores' catalogue and the external 'Farnell' catalogue, all of which may be ordered on the same form. The system automatically forwards orders for standard Stores equipment to the CERN Stores and those for Farnell equipment to Farnell. The delivery time is 48 hours in both cases. Requests for materials are routed for approval in accordance with the standard EDH routing procedures. Logistics Group FI Department

  2. Information for stores users

    CERN Multimedia

    2005-01-01

    The Farnell catalogue can now be accessed from the Material Request form on EDH in addition to the CERN Stores catalogue. Users can order Farnell equipment as well as standard Stores equipment at the same time using a single document, the EDH Materials Request form. The Materials Request form offers users items from both the internal 'Stores' catalogue and the external 'Farnell' catalogue, all of which may be ordered on the same form. The system automatically forwards orders for standard Stores equipment to the CERN Stores and those for Farnell equipment to Farnell. The delivery time is 48 hours in both cases. Requests for materials are routed for approval in accordance with the standard EDH routing procedures. Logistics Group FI Department

  3. Information for stores users

    CERN Multimedia

    2006-01-01

    The Radiospares Catalogue is now accessible from the Material Request page on EDH in the same way as the CERN Stores Catalogue. This means that users can order Radiospares equipment by completing an EDH Materials Request form. N.B.: The system will automatically forward orders for standard Stores equipment to the CERN Stores and those for Radiospares equipment to Radiospares. In both cases the delivery time will be a maximum of 48 hours. Requests for materials will be routed for approval in accordance with the standard EDH routing procedures. Logistics Group FI Department

  4. Information for stores users

    CERN Multimedia

    2007-01-01

    From next week, the SFS UNIMARKET (tooling) catalogue will be accessible using the Material Request form on EDH in addition to the CERN Stores catalogue and those of existing suppliers. Users will now be able to place orders from the SFS catalogue using the Material Request form on EDH. Note: The system automatically forwards orders for standard Stores equipment and those for SFS equipment, placed using the same Material Request form, to the CERN Stores and SFS respectively. In both cases, the maximum delivery time will be 48 hours. Requests for equipment will be routed for approval in accordance with standard EDH routing procedures. Logistics Group FI Department

  5. INFORMATION FOR STORES USERS

    CERN Multimedia

    2007-01-01

    From next week, the SFS UNIMARKET (tooling) catalogue will be accessible using the Material Request form on EDH in addition to the CERN Stores catalogue and those of existing suppliers. Users will now be able to place orders from the SFS catalogue using the Material Request form on EDH. Note: The system automatically forwards orders for standard Stores equipment and those for SFS equipment, placed using the same Material Request form, to the CERN Stores and SFS respectively. In both cases, the maximum delivery time will be 48 hours. Requests for equipment will be routed for approval in accordance with standard EDH routing procedures. Logistics Group FI Department

  6. Information for stores users

    CERN Multimedia

    2006-01-01

    The Radiospares Catalogue is now accessible from the Material Request page on EDH in the same way as the CERN Stores Catalogue. This means that users can order Radiospares equipment by completing an EDH Materials Request form. N.B.: The system will automatically forward orders for standard Stores equipment to the CERN Stores and those for Radiospares equipment to Radiospares. In both cases the delivery time will be a maximum of 48 hours. Requests for materials will be routed for approval in accordance with the standard EDH routing procedures. Logistics Group FI Department

  7. INFORMATION FOR STORES USERS

    CERN Multimedia

    SPL Division

    1999-01-01

    You can now make Material Request from CERN Stores over the WEB :CERN Home/Administrative Tools/EDH/Material Requestor https://edh.cern.ch/Document/MAGVia the Stores Catalogue : CERN Home/Administrative Tools/Stores Catalogueor http://edhcat.cern.ch/In both cases, you need to enter your EDH login and password.For more details, you can consult the Quick Reference Guide on :http://edh.cern.ch/doc/quickrefguides.htmlor obtain a printed version from AIS Support at tel: 79933or e-mail to: ais.support@cern.chSPL DivisionLogistics Group

  8. Students' beliefs and behaviour regarding low-calorie beverages, sweets or snacks: are they affected by lessons on healthy food and by changes to school vending machines?

    Science.gov (United States)

    Kocken, Paul L; van Kesteren, Nicole M C; Buijs, Goof; Snel, Jeltje; Dusseldorp, Elise

    2015-06-01

    To study the effects of school lessons about healthy food on adolescents' self-reported beliefs and behaviour regarding the purchase and consumption of soft drinks, water and extra foods, including sweets and snacks. The lessons were combined with the introduction of lower-calorie foods, food labelling and price reductions in school vending machines. A cluster-randomized controlled design was used to allocate schools to an experimental group (i.e. lessons and changes to school vending machines) and a control group (i.e. 'care as usual'). Questionnaires were used pre-test and post-test to assess students' self-reported purchase of extra products and their knowledge and beliefs regarding the consumption of low-calorie products. Secondary schools in the Netherlands. Twelve schools participated in the experimental group (303 students) and fourteen in the control group (311 students). The students' mean age was 13.6 years, 71.5% were of native Dutch origin and mean BMI was 18.9 kg/m(2). At post-test, the experimental group knew significantly more about healthy food than the control group. Fewer students in the experimental group (43%) than in the control group (56%) reported bringing soft drinks from home. There was no significant effect on attitude, social norm, perceived behavioural control and intention regarding the consumption of low-calorie extra products. The intervention had limited effects on students' knowledge and self-reported behaviour, and no effect on their beliefs regarding low-calorie beverages, sweets or snacks. We recommend a combined educational and environmental intervention of longer duration and engaging parents. More research into the effects of such interventions is needed.

  9. Information for stores users

    CERN Multimedia

    2006-01-01

    The Bossard catalogue is now accessible alongside the CERN Stores catalogue from the Material Request form on EDH. Users will thus be able to order Bossard equipment using the EDH Materials Request form. As a reminder, the system automatically forwards orders for standard Stores equipment to the CERN Stores and those for Bossard equipment to Bossard. In both cases the delivery time will be a maximum of 48 hours. Requests for materials will be routed for approval in accordance with the standard EDH routing procedures. Some items will remain available from the emergency desk in the event of urgent requests. These items will be visible in the Stores catalogue even if they cannot be purchased via the EDH material request form. Logistics Group FI Department

  10. ON STORED GROUNDNUT

    African Journals Online (AJOL)

    user

    2010-06-06

    Jun 6, 2010 ... Environmental and human health problems associated with the use of synthetic ... Mould contamination in stored groundnuts has .... Plastic lunch boxes (220 x 110 x 65 mm) with two compartments and a single cover for both ...

  11. Health food stores investigation.

    Science.gov (United States)

    Gourdine, S P; Traiger, W W; Cohen, D S

    1983-09-01

    In accordance with the New York City Department of Consumer Affairs' mandate to educate consumers and to prevent fraud and deception in the marketplace, the agency conducted a three-month investigation of city health food stores. Twenty-three health food businesses located throughout the five boroughs were visited from September through November 1982 in order to ascertain what those stores sold and how their merchandise compared, in quality and price, with items sold by other businesses.

  12. Provenance Store Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Paulson, Patrick R.; Gibson, Tara D.; Schuchardt, Karen L.; Stephan, Eric G.

    2008-03-01

    Requirements for the provenance store and access API are developed. Existing RDF stores and APIs are evaluated against the requirements and performance benchmarks. The team’s conclusion is to use MySQL as a database backend, with a possible move to Oracle in the near-term future. Both Jena and Sesame’s APIs will be supported, but new code will use the Jena API

  13. Machine Protection and Operation for LHC

    CERN Document Server

    Wenninger, J.

    2016-01-01

    Since 2010 the Large Hadron Collider (LHC) is the accelerator with the highest stored energy per beam, with a record of 140 MJ at a beam energy of 4 TeV, almost a factor of 50 higher than other accelerators. With such a high stored energy, machine protection aspects set the boundary conditions for operation during all phases of the machine cycle. Only the low-intensity commissioning beams can be considered as relatively safe. This document discusses the interplay of machine operation and machine protection at the LHC, from commissioning to regular operation.

  14. New Typewriter Displaces "Big Name" Machines.

    Science.gov (United States)

    School Business Affairs, 1983

    1983-01-01

    The Schoolwriter is a typewriter available at nearly half the price of competing machines. Schools in Minnesota and Maryland have purchased it for classroom machines and have had substantial savings. (MD)

  15. Information for Stores users

    CERN Multimedia

    FI Department

    2008-01-01

    The DISTRELEC catalogue (IT) is now available in EDH in addition to the CERN Stores catalogue and the catalogues of existing suppliers. Using an EDH materials request form, users can now order DISTRELEC equipment from amongst the following product groups: peripherals, multimedia, PC components, data media, communication and data cables and adapters. Non-authorised materials will be clearly indicated. As a reminder, the system automatically manages the distribution of standard Stores equipment and punch out equipment ordered on the same request form. In both cases, delivery will take a maximum of 48 hours. The approval of the EDH document will follow the usual EDH routing procedures. Logistics Group FI Department

  16. Den store skandinaviske redningsaktion

    DEFF Research Database (Denmark)

    Christensen, Claus Bundgård

    2015-01-01

    Historikeren Bo Lidegaard fortæller flot den store historie om den forbløffende og komplicerede skandinaviske redning af fanger fra Hitlers koncentrationslejre. En historie, der samtidig berører alvorlige moralske spørgsmål.......Historikeren Bo Lidegaard fortæller flot den store historie om den forbløffende og komplicerede skandinaviske redning af fanger fra Hitlers koncentrationslejre. En historie, der samtidig berører alvorlige moralske spørgsmål....

  17. Street Ball, Swim Team and the Sour Cream Machine: A Cluster Analysis of out of School Time Participation Portfolios

    Science.gov (United States)

    Nelson, Ingrid Ann; Gastic, Billie

    2009-01-01

    Adolescents spend only a fraction of their waking hours in school and what they do with the rest of their time varies dramatically. Despite this, research on out-of-school time has largely focused on structured programming. The authors analyzed data from the Educational Longitudinal Study of 2002 (ELS:2002) to examine the out-of-school time…

  18. Store Lagre 5

    DEFF Research Database (Denmark)

    Åge, Jensen Niels; Leo, Holm; Mogens, Posvig

    1999-01-01

    A seasonal thermal storage, consisting of a pit store with gravel-sand fill and pipe heat exchanger is designed and conducted at the Central Solar Heating Plant in Marstal, Aeroe.The task, by DTU was to carrie out experiments to determine the heat transport from the polymer pipes to the storage...

  19. Information for stores users

    CERN Multimedia

    FI Department

    2008-01-01

    From the beginning of March onwards, the LYRECO (stationery) catalogue will be accessible from the Material Request form on EDH in the same way as the CERN Stores catalogue and the existing individual supplier catalogues. Items will be delivered within a maximum of 48 hours. Logistics Group FI Department

  20. Information for stores users

    CERN Multimedia

    IT Department

    2008-01-01

    From the beginning of March onwards, the LYRECO (stationery) catalogue will be accessible from the Material Request form on EDH in the same way as the CERN Stores catalogue and the existing individual supplier catalogues. Items will be delivered within a maximum of 48 hours. Logistics Group FI Department

  1. Street ball, swim team and the sour cream machine: a cluster analysis of out of school time participation portfolios.

    Science.gov (United States)

    Nelson, Ingrid Ann; Gastic, Billie

    2009-10-01

    Adolescents spend only a fraction of their waking hours in school and what they do with the rest of their time varies dramatically. Despite this, research on out-of-school time has largely focused on structured programming. The authors analyzed data from the Educational Longitudinal Study of 2002 (ELS:2002) to examine the out-of-school time activity portfolios of 6,338 high school sophomores, accounting for time spent in school clubs and sports as well as 17 other activities. The analytical sample was balanced with respect to sex and racially and ethnically diverse: 49% female, 67% White, 10% Latino, 10% African American, and 6% Asian and Pacific Islander. Approximately 76% of the sample attended public schools, 30% were in the highest socioeconomic quartile, and 20% were in the lowest socioeconomic quartile. The authors identified five distinct out-of-school time activity portfolios based on a cluster analysis. The demographic profiles of students by portfolio type differed significantly with respect to sex, race/ethnicity, socioeconomic status, school type and location. Students by portfolio type also differed significantly in terms of measures of academic success, school behavior, victimization and perceptions of school climate, controlling for covariates. These findings underscore the importance of more complex considerations of adolescents' out-of-school time.

  2. Machine Translation

    Institute of Scientific and Technical Information of China (English)

    张严心

    2015-01-01

    As a kind of ancillary translation tool, Machine Translation has been paid increasing attention to and received different kinds of study by a great deal of researchers and scholars for a long time. To know the definition of Machine Translation and to analyse its benefits and problems are significant for translators in order to make good use of Machine Translation, and helpful to develop and consummate Machine Translation Systems in the future.

  3. Storing Clocked Programs Inside DNA A Simplifying Framework for Nanocomputing

    CERN Document Server

    Chang, Jessica

    2011-01-01

    In the history of modern computation, large mechanical calculators preceded computers. A person would sit there punching keys according to a procedure and a number would eventually appear. Once calculators became fast enough, it became obvious that the critical path was the punching rather than the calculation itself. That is what made the stored program concept vital to further progress. Once the instructions were stored in the machine, the entire computation could run at the speed of the machine. This book shows how to do the same thing for DNA computing. Rather than asking a robot or a pers

  4. Sustainable machining

    CERN Document Server

    2017-01-01

    This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

  5. The Machine Scoring of Writing

    Science.gov (United States)

    McCurry, Doug

    2010-01-01

    This article provides an introduction to the kind of computer software that is used to score student writing in some high stakes testing programs, and that is being promoted as a teaching and learning tool to schools. It sketches the state of play with machines for the scoring of writing, and describes how these machines work and what they do.…

  6. Storing Blood Cells

    Science.gov (United States)

    1976-01-01

    The National Cancer Institute worked with Goddard Space Flight Center to propose a solution to the blood-cell freezing problem. White blood cells and bone marrow are stored for future use by leukemia patients as a result of Goddard and Jet Propulsion Laboratory expertise in electronics and cryogenics. White blood cell and bone marrow bank established using freezing unit. Freezing unit monitors temperature of cells themselves. Thermocouple placed against polyethylene container relays temperature signals to an electronic system which controls small heaters located outside container. Heaters allow liquid nitrogen to circulate at constant temperature and maintain consistent freezing rate. Ability to freeze, store, and thaw white cells and bone marrow without damage is important in leukemia treatment.

  7. Store and forward teledermatology

    Directory of Open Access Journals (Sweden)

    Kanthraj Garehatty

    2007-01-01

    Full Text Available Store and forward and real time or videoconferences are the two types of teledermatology services practiced. Dermatology and radio-diagnosis are visual specialties suited for store-and-forward teledermatology (SAFT. Advances in information technology, electronic instruments and biotechnology have revolutionized and brought changes in SAFT. Cellular phone, digital camera, personal digital assistants, Wi-Fi, Wi-Max and computer- aided-design software are incorporated to deliver the quality health care to remote geographic regions. Complete SAFT care equivalent to face-to-face consultation (Gold standard is essential. Health care providers in rural areas are the ′eyes′ for the consultants. Consultants to guide them should have a rapid periodic audit of visual parameters and dimensions of lesions. Given this background, this article reviews advances in 1 capture, store and transfer of images. 2 Computer Aided measurements of generalized and localized lesions and 3 the integration model to meet all the above two requirements in a centralized location. This process enables diagnosis, management, periodic assessment and complete follow-up care to achieve patient and physician satisfaction. Preservation of privacy and confidentiality of digital images is important. Uniform rules and regulations are required. Indian space research organization (ISRO, Government of India has demonstrated telemedicine pilot projects utilizing the satellite communication and mobile telemedicine units to be useful in meeting the health care needs of remote and rural India. we have to join hands with them to meet dermatology problems in rural areas.

  8. Store and forward teledermatology.

    Science.gov (United States)

    Kanthraj, Garehatty Rudrappa; Srinivas, Chakravarty Rangachari

    2007-01-01

    Store and forward and real time or videoconferences are the two types of teledermatology services practiced. Dermatology and radio-diagnosis are visual specialties suited for store-and-forward teledermatology (SAFT). Advances in information technology, electronic instruments and biotechnology have revolutionized and brought changes in SAFT. Cellular phone, digital camera, personal digital assistants, Wi-Fi, Wi-Max and computer- aided-design software are incorporated to deliver the quality health care to remote geographic regions. Complete SAFT care equivalent to face-to-face consultation (Gold standard) is essential. Health care providers in rural areas are the 'eyes' for the consultants. Consultants to guide them should have a rapid periodic audit of visual parameters and dimensions of lesions. Given this background, this article reviews advances in 1) capture, store and transfer of images. 2) Computer Aided measurements of generalized and localized lesions and 3) the integration model to meet all the above two requirements in a centralized location. This process enables diagnosis, management, periodic assessment and complete follow-up care to achieve patient and physician satisfaction. Preservation of privacy and confidentiality of digital images is important. Uniform rules and regulations are required. Indian space research organization (ISRO), Government of India has demonstrated telemedicine pilot projects utilizing the satellite communication and mobile telemedicine units to be useful in meeting the health care needs of remote and rural India. we have to join hands with them to meet dermatology problems in rural areas.

  9. Food and eating environments: in Canadian schools.

    Science.gov (United States)

    Browning, H Frances; Laxer, Rachel E; Janssen, Ian

    2013-01-01

    This national study was conducted to examine healthy eating programs, healthy eating education, and the food retail environments of schools. A total of 436 Canadian schools were studied. Administrators completed a questionnaire designed to assess school healthy eating programs, healthy eating education, and food retail environment. The number of chain fast food restaurants, chain cafés/coffee shops, and convenience stores within 1 km of schools was measured using geographic information systems food retailer measures from DMTI Spatial Inc. and the Yellow Pages. During the preceding year, 67% of schools had initiated healthy eating lunch programs while 18% had junk food-free days. The majority of schools offered cooking classes (59%) and healthy eating media literacy education (67%), while a minority offered gardening activities (15%) and field trips to farmers' markets (27%) and grocery stores (36%). Fifty-three percent had a school cafeteria, and most had a school tuck shop (75%) and pop/juice vending machines (76%). Fifty percent had a chain fast food restaurant, 33% had a chain café/coffee shop, and 41% had a convenience store within 1 km. An important aspect of addressing childhood obesity will be improving the food environments of schools and their surrounding neighbourhoods, and providing healthy eating education for all students.

  10. Profits, Commercial Food Supplier Involvement, and School Vending Machine Snack Food Availability: Implications for Implementing the New Competitive Foods Rule

    Science.gov (United States)

    Terry-McElrath, Yvonne M.; Hood, Nancy E.; Colabianchi, Natalie; O'Malley, Patrick M.; Johnston, Lloyd D.

    2014-01-01

    Background: The 2013-2014 school year involved preparation for implementing the new US Department of Agriculture (USDA) competitive foods nutrition standards. An awareness of associations between commercial supplier involvement, food vending practices, and food vending item availability may assist schools in preparing for the new standards.…

  11. Caged Birds and Cloning Machines: How Student Imagery "Speaks" to Us about Cultures of Schooling and Student Participation

    Science.gov (United States)

    Leitch, Ruth; Mitchell, Stephanie

    2007-01-01

    With the advent of the United Nations Convention on the Rights of the Child (CRC), there is an increasing requirement that schools ensure children and young people's views are voiced, listened to and taken seriously on matters of significance. Encouraging these shifts by law is one thing; changing the culture in schools is another. For a…

  12. Stored Energy of Plastic Deformation in Tube Bending Processes

    Science.gov (United States)

    Śloderbach, Z.; Pająk, J.

    2013-03-01

    The paper presents an aproximate analytic method for determination of the stored energy of plastic deformation during cold bending of metal tubes at bending machines. Calculations were performed for outer points of the tube layers subjected to tension and compression (the points of maximum strains). The percentage of stored energy related to the plastic strain work was determined and the results were presented in graphs. The influence and importance of the stored energy of plastic deformation on the service life of pipeline bends are discussed.

  13. 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection

    CERN Document Server

    JAS - Joint US-CERN-Japan-Russia Accelerator School

    2016-01-01

    Many particle accelerators operate with very high beam power and very high energy stored in particle beams as well as in magnet systems. In the future, the beam power in high intensity accelerators will further increase. The protection of the accelerator equipment from the consequences of uncontrolled release of the energy is essential. This was the motivation for organizing a first school on beam losses and accelerator protection (in general referred to as machine protection). During the school the methods and technologies to identify, mitigate, monitor and manage the technical risks associated with the operation of accelerators with high-power beams or subsystems with large stored energy were presented. At the completion of the school the participants should have been able to understand the physical phenomena that can damage machine subsystems or interrupt operations and to analyze an accelerator facility to produce a register of technical risks and the corresponding risk mitigation and management strategie...

  14. Triple-fortified rice containing vitamin A reduced marginal vitamin A deficiency and increased vitamin A liver stores in school-aged Thai children.

    Science.gov (United States)

    Pinkaew, Siwaporn; Wegmuller, Rita; Wasantwisut, Emorn; Winichagoon, Pattanee; Hurrell, Richard F; Tanumihardjo, Sherry A

    2014-04-01

    Vitamin A (VA)-fortified rice is a potential intervention strategy to prevent VA deficiency in at-risk populations. Hot-extruded, triple-fortified rice grains with added VA, zinc, and iron were produced by hot extrusion technology and their ability to improve VA status was tested in Thai schoolchildren. The fortification levels were 10 mg of iron, 9 mg of zinc, and 1.05 mg of VA/g extruded rice. A paired stable isotope dilution technique with labeled ¹³C₂-retinyl acetate (¹³C-RID) was used to quantify VA pool size at the beginning and end of the feeding period. Fifty healthy schoolchildren with a serum retinol (SR) concentration of >0.7 μmol/L were randomly assigned to 2 groups to receive either triple-fortified rice (n = 25) or natural rice (n = 25) for 2 mo as part of the daily school meal. The fortified grains, mixed 1:50 with regular rice, were estimated to provide an extra 890 μg of VA/d, 5 d/wk. ¹³C₂-retinyl acetate (1.0 μmol) was administered orally to each child before and at the end of the feeding period to estimate total body reserves (TBRs) of VA, which increased significantly (P retinol at baseline to 269 ± 148 μmol retinol after 2 mo of feeding. There was no change in the TBRs of VA in the control group (108 ± 67 vs. 124 ± 89 μmol retinol) (P = 0.22). Serum retinol remained unchanged in both groups. We conclude that VA-fortified, hot-extruded rice is an efficacious vehicle to provide additional VA to at-risk populations, and that the efficacy of VA-fortified foods can be usefully monitored by the ¹³C-RID measurement of TBRs of VA but not by changes in SR concentration.

  15. Stored Luminescence Computed Tomography

    CERN Document Server

    Cong, Wenxiang; Wang, Ge

    2013-01-01

    The phosphor nanoparticles made of doped semiconductors, pre-excited by well-collimated X-ray radiation, were recently reported for their light emission upon NIR light stimulation. The characteristics of X-ray energy storage and NIR stimulated emission is highly desirable to design targeting probes and improve molecular and cellular imaging. Here we propose stored luminescence computed tomography (SLCT), perform realistic numerical simulation, and demonstrate a much-improved spatial resolution in a preclinical research context. The future opportunities are also discussed along this direction.

  16. Simple machines

    CERN Document Server

    Graybill, George

    2007-01-01

    Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

  17. Mi Segundo Libro de Maquinas Simples: Las Palancas. Escuela Intermedia Grados 7, 8 y 9 (My Second Book of Simple Machines: Levers. Intermediate School Grades 7, 8, and 9).

    Science.gov (United States)

    Alvarado, Patricio R.; Montalvo, Luis

    This is the second book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. By suggesting experiments and posing questions concerning drawings in the book which illustrate the scientific principles, this book explains the workings of three types of levers. Resistance…

  18. Mi Primer Libro de Maquinas Simples: Trabajo y Fuerza. Escuela Intermedia Grados 7, 8 y 9 (My First Book of Simple Machines: Work and Force. Intermediate School Grades 7, 8, and 9).

    Science.gov (United States)

    Alvarado, Patricio R.; Montalvo, Luis

    This is the first book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume defines force and work by suggesting experiments and posing questions concerning drawings in the book which illustrate scientific principles. Answers to the questions are provided;…

  19. Mi Tercer Libro de Maquinas Simples: La Rueda y la Polea. Escuela Intermedia Grados 7, 8 y 9 (My Third Book of Simple Machines: The Wheel and the Pulley. Intermediate School Grades 7, 8, and 9).

    Science.gov (United States)

    Alvarado, Patricio R.; Montalvo, Luis

    This is the third book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains principles governing wheels and pulleys by suggesting experiments and posing questions concerning drawings in the book which illustrate the scientific principles. Friction…

  20. Mi Cuarto Libro de Maquinas Simples: Otras Modificaciones de la Rueda. Escuela Intermedia Grados 7, 8 y 9 (My Fourth Book of Simple Machines: Other Modifications of the Wheel. Intermediate School Grades 7, 8, and 9).

    Science.gov (United States)

    Alvarado, Patricio R.; Montalvo, Luis

    This is the fourth book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains further refinements of the wheel which is introduced in volume three. The fourth volume explains principles behind gears and the relationship between velocity and force by…

  1. Store manager performance and satisfaction: effects on store employee performance and satisfaction, store customer satisfaction, and store customer spending growth.

    Science.gov (United States)

    Netemeyer, Richard G; Maxham, James G; Lichtenstein, Donald R

    2010-05-01

    Based on emotional contagion theory and the value-profit chain literatures, the present study posits a number of hypotheses that show how managers in the small store, small number of employees retail context may affect store employees, customers, and potentially store performance. With data from 306 store managers, 1,615 store customer-contact employees, and 57,656 customers of a single retail chain, the authors examined relationships among store manager job satisfaction and job performance, store customer-contact employee job satisfaction and job performance, customer satisfaction with the retailer, and a customer-spending-based store performance metric (customer spending growth over a 2-year period). Via path analysis, several hypothesized direct and interaction relations among these constructs are supported. The results suggest implications for academic researchers and retail managers. PsycINFO Database Record (c) 2010 APA, all rights reserved.

  2. [The role of Wacława Moszyński in the development of the Polish School of Machine and Mechanism Theory].

    Science.gov (United States)

    Kisiel, Janusz; Pylak, Konrad; Schabowska, Krystyna

    2005-01-01

    The end of the 19th and the first half of the 20th centuries saw the emergence and intensive development of many disciplines in the technical sciences, and the laying of a groundwork for those disciplines in their current form. In Poland, a country deprived of independent statehood until 1918, this was additionally a period when native research centres and scientific schools came into being, and when Polish-language specialist literatures emerged as well. Many of the eminent personages whose activities contributed to those trends have already been described in biographical notes and articles. There are still, however, not enough studies dealing with the substance of their scientific and professional achievements. One of the personages in question was Wacława Moszyński, professor of the Warsaw Technical University, a pioneer of machine construction and mechanism theory, author of the first academic textbook in the field to be published in Poland. The current article discusses Moszyński's contribution to the development of mechanism and machine theory. The first part of the article gives an outline of the history of the discipline until 1945, presents the context of the after-war activities of the author, and evaluates his influence on the development of machine and mechanism theory in Poland; it also carries a short biography of Moszyński. The rest of the article is devoted to Moszyński's scientific achievements, and describes his approach to matters of structure, kinematics and dynamics, with special focus on those of his formulations and solution to problems that appear particularly innovative and original. The article also points out those proposals by Moszyński which made him a precursor of other disciplines, such as vibroacoustics, biomechanics and ergonomics. The paper also presents the role of Moszyński's work as a foundation for the development of the Warsaw research-and-teching centre in the field. The achievements and methods of the Warsaw school

  3. Introduction to Machine Protection

    CERN Document Server

    Schmidt, R

    2016-01-01

    Protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent, although there was one paper that discussed beam-induced damage for the SLAC linac (Stanford Linear Accelerator Center) as early as in 1967. It is related to the increasing beam power of high-power proton accelerators, to the emission of synchrotron light by electron-positron accelerators and to the increase of energy stored in the beam. Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping ...

  4. Electric machine

    Science.gov (United States)

    El-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Reddy, Patel Bhageerath [Madison, WI

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  5. Queues, stores, and tableaux

    CERN Document Server

    Draief, Moez; O'Connell, Neil

    2005-01-01

    Consider the single server queue with an infinite buffer and a FIFO discipline, either of type M/M/1 or Geom/Geom/1. Denote by A the arrival process and by s the services. Assume the stability condition to be satisfied. Denote by D the departure process in equilibrium and by r the time spent by the customers at the very back of the queue. We prove that (D,r) has the same law as (A,s) which is an extension of the classical Burke Theorem. In fact, r can be viewed as the departures from a dual storage model. This duality between the two models also appears when studying the transient behavior of a tandem by means of the RSK algorithm: the first and last row of the resulting semi-standard Young tableau are respectively the last instant of departure in the queue and the total number of departures in the store.

  6. Adaptive machine and its thermodynamic costs

    Science.gov (United States)

    Allahverdyan, Armen E.; Wang, Q. A.

    2013-03-01

    We study the minimal thermodynamically consistent model for an adaptive machine that transfers particles from a higher chemical potential reservoir to a lower one. This model describes essentials of the inhomogeneous catalysis. It is supposed to function with the maximal current under uncertain chemical potentials: if they change, the machine tunes its own structure fitting it to the maximal current under new conditions. This adaptation is possible under two limitations: (i) The degree of freedom that controls the machine's structure has to have a stored energy (described via a negative temperature). The origin of this result is traced back to the Le Chatelier principle. (ii) The machine has to malfunction at a constant environment due to structural fluctuations, whose relative magnitude is controlled solely by the stored energy. We argue that several features of the adaptive machine are similar to those of living organisms (energy storage, aging).

  7. The importance of store windows in creating store identity and store attractiveness

    Directory of Open Access Journals (Sweden)

    Renko Sanda

    2012-01-01

    Full Text Available While choosing the store, customer first notices the store window and it plays an important role in retailing strategy. Store's window is what customers see first in meeting with the store. Store window design can lead customer to enter the store, and can give a lot of information about store brands and products. Besides the analysis of the way how specific elements of the window design affect customers and their perception, the explanation of their attraction and rejection to customers is given. If we consider the importance of the topics, we can point out the lack of literature about store windows as the communication tool which allow store to communicate with its customers and to create its retailing strategy as well. There is the scientific contribution of this paper. The paper gives theoretical comprehensions completed with the results of the study about the importance of store windows for retailers as well as for customers. Therefore, for the purpose of this paper, a two-phase research study, including a qualitative and a quantitative approach, was used: 1 the qualitative study among retailers which indicated the most important elements of store windows, the level of financial sources invested in the window design, the basis for the decisions about store window design, etc.; 2 the quantitative study on the sample of consumers conducted with on-line questionnaire. Findings suggest that store window attractiveness is the main motif for store visits. The results of the research confirm that by means of store window and its elements (with special emphasis on price and pricing actions retail store sends messages to its consumers.

  8. The Machine within the Machine

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Although Virtual Machines are widespread across CERN, you probably won't have heard of them unless you work for an experiment. Virtual machines - known as VMs - allow you to create a separate machine within your own, allowing you to run Linux on your Mac, or Windows on your Linux - whatever combination you need.   Using a CERN Virtual Machine, a Linux analysis software runs on a Macbook. When it comes to LHC data, one of the primary issues collaborations face is the diversity of computing environments among collaborators spread across the world. What if an institute cannot run the analysis software because they use different operating systems? "That's where the CernVM project comes in," says Gerardo Ganis, PH-SFT staff member and leader of the CernVM project. "We were able to respond to experimentalists' concerns by providing a virtual machine package that could be used to run experiment software. This way, no matter what hardware they have ...

  9. Machine Learning

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Machine learning, which builds on ideas in computer science, statistics, and optimization, focuses on developing algorithms to identify patterns and regularities in data, and using these learned patterns to make predictions on new observations. Boosted by its industrial and commercial applications, the field of machine learning is quickly evolving and expanding. Recent advances have seen great success in the realms of computer vision, natural language processing, and broadly in data science. Many of these techniques have already been applied in particle physics, for instance for particle identification, detector monitoring, and the optimization of computer resources. Modern machine learning approaches, such as deep learning, are only just beginning to be applied to the analysis of High Energy Physics data to approach more and more complex problems. These classes will review the framework behind machine learning and discuss recent developments in the field.

  10. Tobacco advertising in retail stores.

    Science.gov (United States)

    Cummings, K M; Sciandra, R; Lawrence, J

    1991-01-01

    Recent studies have described tobacco advertising in the print media, on billboards, and through sponsorship of cultural and sporting events. However, little attention has been given to another common and unavoidable source of tobacco advertising, that which is encountered in retail stores. In July 1987, we conducted a survey of 61 packaged goods retail stores in Buffalo, NY, to assess the prevalence and type of point-of-sale tobacco advertising. In addition, store owners or managers were surveyed to determine their store's policy regarding tobacco advertising, receipt of monetary incentives from distributors for displaying tobacco ads, and willingness to display antitobacco ads. Six types of stores were involved in the study: 10 supermarkets, 10 privately owned grocery stores, 9 chain convenience food stores that do not sell gasoline, 11 chain convenience food stores that sell gasoline, 11 chain pharmacies, and 10 private pharmacies. Two-thirds of the stores displayed tobacco posters, and 87 percent had promotional items advertising tobacco products, primarily cigarettes. Larger stores, and those that were privately owned, tended to display more posters and promotional items. Eighty percent of tobacco product displays were for cigarettes, 16 percent for smokeless tobacco products, and 4 percent for cigars and pipe tobacco. Convenience stores selling gasoline had the most separate tobacco product displays. Of tobacco product displays, 24 percent were located adjacent to candy and snack displays. Twenty-nine of the 61 store owners or managers indicated that their store had a policy regulating the display of tobacco ads and tobacco product displays. Policies dealt primarily with the location of tobacco posters (for example, no ads in the window) and number of product displays. Only 14 shop owners or managers indicated that they had previously displayed antitobacco information; more than half (31 of 61) said that they would be willing to display antitobaccoads.In many

  11. Small store presence in Japan

    NARCIS (Netherlands)

    M.A. Carree (Martin); J.C.A. Potjes; A.R. Thurik (Roy)

    1993-01-01

    textabstractThe determinants of the development of small store presence in Japan are investigated using a fixed effects multinomial logit market share model. Large stores tend to have higher market shares in shop-types with increasing shares in consumer expenditures, increasing inventory turnover,

  12. Small store presence in Japan

    NARCIS (Netherlands)

    M.A. Carree (Martin); J.C.A. Potjes; A.R. Thurik (Roy)

    1993-01-01

    textabstractThe determinants of the development of small store presence in Japan are investigated using a fixed effects multinomial logit market share model. Large stores tend to have higher market shares in shop-types with increasing shares in consumer expenditures, increasing inventory turnover, a

  13. Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Chikkagoudar, Satish; Chatterjee, Samrat; Thomas, Dennis G.; Carroll, Thomas E.; Muller, George

    2017-04-21

    The absence of a robust and unified theory of cyber dynamics presents challenges and opportunities for using machine learning based data-driven approaches to further the understanding of the behavior of such complex systems. Analysts can also use machine learning approaches to gain operational insights. In order to be operationally beneficial, cybersecurity machine learning based models need to have the ability to: (1) represent a real-world system, (2) infer system properties, and (3) learn and adapt based on expert knowledge and observations. Probabilistic models and Probabilistic graphical models provide these necessary properties and are further explored in this chapter. Bayesian Networks and Hidden Markov Models are introduced as an example of a widely used data driven classification/modeling strategy.

  14. Continual Learning through Evolvable Neural Turing Machines

    DEFF Research Database (Denmark)

    Lüders, Benno; Schläger, Mikkel; Risi, Sebastian

    2016-01-01

    Continual learning, i.e. the ability to sequentially learn tasks without catastrophic forgetting of previously learned ones, is an important open challenge in machine learning. In this paper we take a step in this direction by showing that the recently proposed Evolving Neural Turing Machine (ENTM......) approach is able to perform one-shot learning in a reinforcement learning task without catastrophic forgetting of previously stored associations....

  15. Machine testning

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with a laboratory exercise of 3 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercise includes a series of tests carried out by the student on a conventional and a numerically controled lathe, respectively. This document...

  16. Representational Machines

    DEFF Research Database (Denmark)

    Petersson, Dag; Dahlgren, Anna; Vestberg, Nina Lager

    to the enterprises of the medium. This is the subject of Representational Machines: How photography enlists the workings of institutional technologies in search of establishing new iconic and social spaces. Together, the contributions to this edited volume span historical epochs, social environments, technological...

  17. Are You Storing Food Safely?

    Science.gov (United States)

    ... should be stored in tight containers. With commercially frozen foods, it's important to follow the cooking instructions on ... It appears as grayish-brown leathery spots on frozen food. It can occur when food is not securely ...

  18. Adding machine and calculating machine

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In 1642 the French mathematician Blaise Pascal(1623-1662) invented a machine;.that could add and subtract. It had.wheels that each had: 1 to 10 marked off along its circumference. When the wheel at the right, representing units, made one complete circle, it engaged the wheel to its left, represents tens, and moved it forward one notch.

  19. Information from the central stores

    CERN Multimedia

    GS Department

    2010-01-01

    All items sold in the CERN shop (Bldg. 33) are now available in the central stores (Bldg. 73) and can be purchased on-line via EDH “Material Request” or at the “Emergency Desk” of the stores on the ground floor of Bldg. 73. These items are visible in the CERN catalogue under the “SCEM” codes beginning with 92. Department of General Infrastructure Services (GS) GS-SEM Group

  20. CORPORATE REBRANDING OF GRAMEDIA STORE (CORPORATE REBRANDING DI GRAMEDIA STORE

    Directory of Open Access Journals (Sweden)

    Natasha Helena Kairupan

    2016-10-01

    Full Text Available Abstract. The purposes of this research are to determine the stages of analysis, planning, and evaluation of corporate rebranding process of Gramedia Book Store to be Gramedia Store to rise stakeholder’s awareness. The method used is descriptive qualitative with positivism paradigm. The technique of collecting data through in-depth interview, observation, and literature study. The result of this research showed the analysis stage by analyzing the market through insights and foresights, brand audit through SWOT analysis, and identifying opportunities. The planning stage is by determine the purpose of the planning process and then determine the target audience, consist of external and internal customer. The planning of external customer by renaming and change of corporate identity, and marketing planning using communication channel (above the line and below the line. The planning of internal customer by Brand Induction, training, inspiration briefing at store, and innovation competition. The evaluation of rebranding process of Gramedia Store is having a focus group discussion with customer, media monitoring, and presentation to BOD. Keywords : Process, Corporate Rebranding, Stakeholder Awareness, Corporate Identity, Gramedia Store Abstrak.Tujuan penelitian ini adalah untuk mengetahui bagaimana tahapan analisis, perencanaan, dan evaluasi proses corporate rebranding Gramedia Book Store menjadi Gramedia Store untuk meningkatkan stakeholder awareness. Pendekatan yang digunakan adalah kualitatif dengan paradigma positivisme dan jenis studi deksriptif. Teknik pengumpulan data yang dilakukan melalui wawancara mendalam, observasi, dan studi pustaka. Berdasarkan hasil penelitian, tahapan analisis dilakukan dengan menganalisis pasar melalui insights dan foresights, audit merek dengan analisis SWOT, dan mengidentifikasi peluang. Dalam tahapan perencanaan dengan menentukan tujuan kemudian menentukan target audiens, yaitu eksternal dan internal. Perencanaan

  1. Genesis machines

    CERN Document Server

    Amos, Martyn

    2014-01-01

    Silicon chips are out. Today's scientists are using real, wet, squishy, living biology to build the next generation of computers. Cells, gels and DNA strands are the 'wetware' of the twenty-first century. Much smaller and more intelligent, these organic computers open up revolutionary possibilities. Tracing the history of computing and revealing a brave new world to come, Genesis Machines describes how this new technology will change the way we think not just about computers - but about life itself.

  2. Prototype-based models in machine learning

    NARCIS (Netherlands)

    Biehl, Michael; Hammer, Barbara; Villmann, Thomas

    2016-01-01

    An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of poten

  3. Prototype-based models in machine learning

    NARCIS (Netherlands)

    Biehl, Michael; Hammer, Barbara; Villmann, Thomas

    2016-01-01

    An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of

  4. TruStore: Implementing a Trusted Store for Android

    OpenAIRE

    Yury, Zhauniarovich; Olga, Gadyatskaya; Bruno, Crispo

    2013-01-01

    In the Android ecosystem, the process of verifying the integrity of downloaded apps is left to the user. Different from other systems, e.g., Apple, App Store, Google does not provide any certified vetting process for the Android apps. This choice has a lot of advantages but it is also the open door to possible attacks as the recent one shown by Bluebox. To address this issue, we present how to enable the deployment of application certification service, we called TruStores, for the Android pla...

  5. Snacks, sweetened beverages, added sugars, and schools.

    Science.gov (United States)

    2015-03-01

    Concern over childhood obesity has generated a decade-long reformation of school nutrition policies. Food is available in school in 3 venues: federally sponsored school meal programs; items sold in competition to school meals, such as a la carte, vending machines, and school stores; and foods available in myriad informal settings, including packed meals and snacks, bake sales, fundraisers, sports booster sales, in-class parties, or other school celebrations. High-energy, low-nutrient beverages, in particular, contribute substantial calories, but little nutrient content, to a student's diet. In 2004, the American Academy of Pediatrics recommended that sweetened drinks be replaced in school by water, white and flavored milks, or 100% fruit and vegetable beverages. Since then, school nutrition has undergone a significant transformation. Federal, state, and local regulations and policies, along with alternative products developed by industry, have helped decrease the availability of nutrient-poor foods and beverages in school. However, regular access to foods of high energy and low quality remains a school issue, much of it attributable to students, parents, and staff. Pediatricians, aligning with experts on child nutrition, are in a position to offer a perspective promoting nutrient-rich foods within calorie guidelines to improve those foods brought into or sold in schools. A positive emphasis on nutritional value, variety, appropriate portion, and encouragement for a steady improvement in quality will be a more effective approach for improving nutrition and health than simply advocating for the elimination of added sugars.

  6. Simulating Turing machines on Maurer machines

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    In a previous paper, we used Maurer machines to model and analyse micro-architectures. In the current paper, we investigate the connections between Turing machines and Maurer machines with the purpose to gain an insight into computability issues relating to Maurer machines. We introduce ways to

  7. TURING MACHINE AS UNIVERSAL ALGORITHM EXECUTOR AND ITS APPLICATION IN THE PROCESS OF HIGH-SCHOOL STUDENTS` ADVANCED STUDY OF ALGORITHMIZATION AND PROGRAMMING FUNDAMENTALS

    Directory of Open Access Journals (Sweden)

    Oleksandr B. Yashchyk

    2016-05-01

    Full Text Available The article discusses the importance of studying the notion of algorithm and its formal specification using Turing machines. In the article it was identified the basic hypothesis of the theory of algorithms for Turing as well as reviewed scientific research of modern scientists devoted to this issue and found the main principles of the Turing machine as an abstract mathematical model. The process of forming information competencies components, information culture and students` logical thinking development with the inclusion of the topic “Study and Application of Turing machine as Universal Algorithm Executor” in the course of Informatics was analyzed.

  8. Environmentally Friendly Machining

    CERN Document Server

    Dixit, U S; Davim, J Paulo

    2012-01-01

    Environment-Friendly Machining provides an in-depth overview of environmentally-friendly machining processes, covering numerous different types of machining in order to identify which practice is the most environmentally sustainable. The book discusses three systems at length: machining with minimal cutting fluid, air-cooled machining and dry machining. Also covered is a way to conserve energy during machining processes, along with useful data and detailed descriptions for developing and utilizing the most efficient modern machining tools. Researchers and engineers looking for sustainable machining solutions will find Environment-Friendly Machining to be a useful volume.

  9. Patterns of store patronage in urban China

    National Research Council Canada - National Science Library

    Uncles, Mark D; Kwok, Simon

    2009-01-01

    Reported is a formal investigation of store patronage in urban China. Using consumer panel data for sales of packaged goods through store types and named store chains, patterns of sales, loyalty and duplication are examined...

  10. Machine Transliteration

    CERN Document Server

    Knight, K; Knight, Kevin; Graehl, Jonathan

    1997-01-01

    It is challenging to translate names and technical terms across languages with different alphabets and sound inventories. These items are commonly transliterated, i.e., replaced with approximate phonetic equivalents. For example, "computer" in English comes out as "konpyuutaa" in Japanese. Translating such items from Japanese back to English is even more challenging, and of practical interest, as transliterated items make up the bulk of text phrases not found in bilingual dictionaries. We describe and evaluate a method for performing backwards transliterations by machine. This method uses a generative model, incorporating several distinct stages in the transliteration process.

  11. Store Stokkavatn. Beskrivelse av forurensningssituasjonen

    OpenAIRE

    Holtan, H.

    1985-01-01

    Rapporten, som er et ledd i arbeidet med en vannbruksplan for Store Stokkavatn ved Stavanger, sammenstiller og diskuterer data som er samlet inn fra innsjøen og dens tilløp av Byveterinæretaten i Stavanger. Store Stokkavatnet er reservevannkilde for Stavanger og dessuten er innsjøen sentral i rekreasjonsmessig sammenheng. På bakgrunn av de foreliggende data, er innsjøens forurensningstilstand på grensen av det akseptable hva algeproduksjon (eutrofiering) og bakteriologiske forhold angår. Fler...

  12. Store operations to maintain cache coherence

    Energy Technology Data Exchange (ETDEWEB)

    Evangelinos, Constantinos; Nair, Ravi; Ohmacht, Martin

    2017-09-12

    In one embodiment, a computer-implemented method includes encountering a store operation during a compile-time of a program, where the store operation is applicable to a memory line. It is determined, by a computer processor, that no cache coherence action is necessary for the store operation. A store-without-coherence-action instruction is generated for the store operation, responsive to determining that no cache coherence action is necessary. The store-without-coherence-action instruction specifies that the store operation is to be performed without a cache coherence action, and cache coherence is maintained upon execution of the store-without-coherence-action instruction.

  13. Stores, Weight and Inertial System Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility provides stores weight, center of gravity, and inertia measurements in support of weapon/aircraft compatibility testing. System provides store weight...

  14. Store operations to maintain cache coherence

    Energy Technology Data Exchange (ETDEWEB)

    Evangelinos, Constantinos; Nair, Ravi; Ohmacht, Martin

    2017-08-01

    In one embodiment, a computer-implemented method includes encountering a store operation during a compile-time of a program, where the store operation is applicable to a memory line. It is determined, by a computer processor, that no cache coherence action is necessary for the store operation. A store-without-coherence-action instruction is generated for the store operation, responsive to determining that no cache coherence action is necessary. The store-without-coherence-action instruction specifies that the store operation is to be performed without a cache coherence action, and cache coherence is maintained upon execution of the store-without-coherence-action instruction.

  15. Storing XML Documents in Databases

    NARCIS (Netherlands)

    Schmidt, A.R.; Manegold, S.; Kersten, M.L.; Rivero, L.C.; Doorn, J.H.; Ferraggine, V.E.

    2005-01-01

    The authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML standards as pos

  16. Analysis of machining and machine tools

    CERN Document Server

    Liang, Steven Y

    2016-01-01

    This book delivers the fundamental science and mechanics of machining and machine tools by presenting systematic and quantitative knowledge in the form of process mechanics and physics. It gives readers a solid command of machining science and engineering, and familiarizes them with the geometry and functionality requirements of creating parts and components in today’s markets. The authors address traditional machining topics, such as: single and multiple point cutting processes grinding components accuracy and metrology shear stress in cutting cutting temperature and analysis chatter They also address non-traditional machining, such as: electrical discharge machining electrochemical machining laser and electron beam machining A chapter on biomedical machining is also included. This book is appropriate for advanced undergraduate and graduate mechani cal engineering students, manufacturing engineers, and researchers. Each chapter contains examples, exercises and their solutions, and homework problems that re...

  17. Diamond Measuring Machine

    Energy Technology Data Exchange (ETDEWEB)

    Krstulic, J.F.

    2000-01-27

    The fundamental goal of this project was to develop additional capabilities to the diamond measuring prototype, work out technical difficulties associated with the original device, and perform automated measurements which are accurate and repeatable. For this project, FM and T was responsible for the overall system design, edge extraction, and defect extraction and identification. AccuGem provided a lab and computer equipment in Lawrence, 3D modeling, industry expertise, and sets of diamonds for testing. The system executive software which controls stone positioning, lighting, focusing, report generation, and data acquisition was written in Microsoft Visual Basic 6, while data analysis and modeling were compiled in C/C++ DLLs. All scanning parameters and extracted data are stored in a central database and available for automated analysis and reporting. The Phase 1 study showed that data can be extracted and measured from diamond scans, but most of the information had to be manually extracted. In this Phase 2 project, all data required for geometric modeling and defect identification were automatically extracted and passed to a 3D modeling module for analysis. Algorithms were developed which automatically adjusted both light levels and stone focus positioning for each diamond-under-test. After a diamond is analyzed and measurements are completed, a report is printed for the customer which shows carat weight, summarizes stone geometry information, lists defects and their size, displays a picture of the diamond, and shows a plot of defects on a top view drawing of the stone. Initial emphasis of defect extraction was on identification of feathers, pinpoints, and crystals. Defects were plotted color-coded by industry standards for inclusions (red), blemishes (green), and unknown defects (blue). Diamonds with a wide variety of cut quality, size, and number of defects were tested in the machine. Edge extraction, defect extraction, and modeling code were tested for

  18. Decoupler pylon: wing/store flutter suppressor

    Science.gov (United States)

    Reed, W. H., III (Inventor)

    1982-01-01

    A device for suspending a store from a support such as an aircraft wing and more specifically for increasing the flutter speed of an aircraft flying with attached store and reducing the sensitivity of flutter to changes in the pitch inertia and center of gravity location of the store is described. It comprises softspring where the store pitch mode is decoupled from support modes and a low frequency active control mechanism which maintains store alignment. A pneumatic suspension system both isolates the store in pitch and, under conditions of changing mean load, aligns the store with the wing to which it is attached.

  19. Program Guide for Basic Precision Machining 8754000 (IN48.052300) and Precision Machining MTR0470 (IN48.050300).

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This competency-based program guide provides course content information and procedures for secondary schools, postsecondary vocational schools, and community colleges in Florida that conduct programs in basic precision machining and precision machining. The first section is on legal authority, which applies to all vocational education programs in…

  20. Automation of printing machine

    OpenAIRE

    Sušil, David

    2016-01-01

    Bachelor thesis is focused on the automation of the printing machine and comparing the two types of printing machines. The first chapter deals with the history of printing, typesettings, printing techniques and various kinds of bookbinding. The second chapter describes the difference between sheet-fed printing machines and offset printing machines, the difference between two representatives of rotary machines, technological process of the products on these machines, the description of the mac...

  1. Store-Operated Calcium Channels.

    Science.gov (United States)

    Prakriya, Murali; Lewis, Richard S

    2015-10-01

    Store-operated calcium channels (SOCs) are a major pathway for calcium signaling in virtually all metozoan cells and serve a wide variety of functions ranging from gene expression, motility, and secretion to tissue and organ development and the immune response. SOCs are activated by the depletion of Ca(2+) from the endoplasmic reticulum (ER), triggered physiologically through stimulation of a diverse set of surface receptors. Over 15 years after the first characterization of SOCs through electrophysiology, the identification of the STIM proteins as ER Ca(2+) sensors and the Orai proteins as store-operated channels has enabled rapid progress in understanding the unique mechanism of store-operate calcium entry (SOCE). Depletion of Ca(2+) from the ER causes STIM to accumulate at ER-plasma membrane (PM) junctions where it traps and activates Orai channels diffusing in the closely apposed PM. Mutagenesis studies combined with recent structural insights about STIM and Orai proteins are now beginning to reveal the molecular underpinnings of these choreographic events. This review describes the major experimental advances underlying our current understanding of how ER Ca(2+) depletion is coupled to the activation of SOCs. Particular emphasis is placed on the molecular mechanisms of STIM and Orai activation, Orai channel properties, modulation of STIM and Orai function, pharmacological inhibitors of SOCE, and the functions of STIM and Orai in physiology and disease.

  2. Storing Empty Calories and Chronic Disease Risk: Snack-Food Products, Nutritive Content, and Manufacturers in Philadelphia Corner Stores

    Science.gov (United States)

    Karpyn, Allison; Sherman, Sandy

    2010-01-01

    Corner stores are part of the urban food environment that may contribute to obesity and diet-related diseases, particularly for low-income and minority children. The snack foods available in corner stores may be a particularly important aspect of an urban child’s food environment. Unfortunately, there is little data on exactly what snack foods corner stores stock, or where these foods come from. We evaluated snack foods in 17 Philadelphia corner stores, located in three ethnically distinct, low-income school neighborhoods. We recorded the manufacturer, calories, fat, sugar, and sodium for all snack items, excluding candy and prepared foods. We then compared the nutritive content of assessed snack items to established dietary recommendations and a school nutrition standard. In total, stores stocked 452 kinds of snacks, with only 15% of items common between all three neighborhoods. Total and unique snacks and snack food manufacturers varied by neighborhood, but distributions in snack type varied negligibly: overall, there were no fruit snacks, no vegetable snacks, and only 3.6% of all snacks (by liberal definition) were whole grain. The remainder (96.4% of snacks) was highly processed foods. Five of 65 manufacturers supplied 73.4% of all kinds of snack foods. Depending on serving size definition, 80.0-91.5% of snack foods were “unhealthy” (by the school nutrition standard), including seven of 11 wholegrain products. A single snack item could supply 6-14% of a day’s recommended calories, fat, sugar, and sodium on average (or 56-169% at the extreme) for a “typical” child. We conclude that corner store snack food inventories are almost entirely unhealthful, and we discuss possible implications and next steps for research and intervention. PMID:20405225

  3. Machine Protection Issues and Solutions for Linear Accelerator Complexes

    CERN Document Server

    Jonker, M; Schmidt, R; Schulte, D; Ross, M

    2013-01-01

    The workshop “Machine Protection focusing on Linear Accelerator Complexes” was held from 6-8 June 2012 at CERN. This workshop brought together experts working on machine protection systems for accelerator facilities with high brilliance or large stored beam energies, with the main focus on linear accelerators and their injectors. An overview of the machine protection systems for several accelerators was given. Beam loss mechanisms and their detection were discussed. Mitigation of failures and protection systems were presented. This paper summarises the workshop and reviews the current state of the art in machine protection systems.

  4. Machine musicianship

    Science.gov (United States)

    Rowe, Robert

    2002-05-01

    The training of musicians begins by teaching basic musical concepts, a collection of knowledge commonly known as musicianship. Computer programs designed to implement musical skills (e.g., to make sense of what they hear, perform music expressively, or compose convincing pieces) can similarly benefit from access to a fundamental level of musicianship. Recent research in music cognition, artificial intelligence, and music theory has produced a repertoire of techniques that can make the behavior of computer programs more musical. Many of these were presented in a recently published book/CD-ROM entitled Machine Musicianship. For use in interactive music systems, we are interested in those which are fast enough to run in real time and that need only make reference to the material as it appears in sequence. This talk will review several applications that are able to identify the tonal center of musical material during performance. Beyond this specific task, the design of real-time algorithmic listening through the concurrent operation of several connected analyzers is examined. The presentation includes discussion of a library of C++ objects that can be combined to perform interactive listening and a demonstration of their capability.

  5. Economic Evaluation of a Solar Charged Thermal Energy Store for Space Heating

    OpenAIRE

    Melo, Manuel

    2013-01-01

    A thermal energy store corrects the misalignment of heating demand in the winter relative to solar thermal energy gathered in the summer. This thesis reviews the viability of a solar charged hot water tank thermal energy store for a school at latitude 56.25N, longitude -120.85W

  6. Economic Evaluation of a Solar Charged Thermal Energy Store for Space Heating

    OpenAIRE

    Melo, Manuel

    2013-01-01

    A thermal energy store corrects the misalignment of heating demand in the winter relative to solar thermal energy gathered in the summer. This thesis reviews the viability of a solar charged hot water tank thermal energy store for a school at latitude 56.25N, longitude -120.85W

  7. Machine Protection and Interlock Systems for Circular Machines - Example for LHC

    CERN Document Server

    Schmidt, R.

    2016-01-01

    This paper introduces the protection of circular particle accelerators from accidental beam losses. Already the energy stored in the beams for accelerators such as the TEVATRON at Fermilab and Super Proton Synchrotron (SPS) at CERN could cause serious damage in case of uncontrolled beam loss. With the CERN Large Hadron Collider (LHC), the energy stored in particle beams has reached a value two orders of magnitude above previous accelerators and poses new threats with respect to hazards from the energy stored in the particle beams. A single accident damaging vital parts of the accelerator could interrupt operation for years. Protection of equipment from beam accidents is mandatory. Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. extraction of the beam towards a dedicated beam dump block o...

  8. An investigation of Consumer Specialty Store and Multi-Brand Store loyalty

    Directory of Open Access Journals (Sweden)

    Sarabjot Singh

    2013-10-01

    Full Text Available In the competitive era of retailing, retailers need to understand the importance of store format preferences. The study aimed to understand consumer store loyalty, in-depth interview is conducted to examine consumer store loyalty antecedents for two retail formats: specialty stores and multi brand stores. The study conceptualizes store loyalty factors like program loyalty, trust and brand commitment. Trust and brand commitment act as a mediating factors between storeimage and store loyalty formats, and also between brand image and store loyalty formats. The findings highlight how consumer store loyalty preference changes for these two formats.

  9. Electrical machines mathematical fundamentals of machine topologies

    CERN Document Server

    Gerling, Dieter

    2015-01-01

    Electrical Machines and Drives play a powerful role in industry with an ever increasing importance. This fact requires the understanding of machine and drive principles by engineers of many different disciplines. Therefore, this book is intended to give a comprehensive deduction of these principles. Special attention is given to the precise mathematical derivation of the necessary formulae to calculate machines and drives and to the discussion of simplifications (if applied) with the associated limits. The book shows how the different machine topologies can be deduced from general fundamentals, and how they are linked together. This book addresses graduate students, researchers, and developers of Electrical Machines and Drives, who are interested in getting knowledge about the principles of machine and drive operation and in detecting the mathematical and engineering specialties of the different machine and drive topologies together with their mutual links. The detailed - but nevertheless compact - mat...

  10. Laser machining of advanced materials

    CERN Document Server

    Dahotre, Narendra B

    2011-01-01

    Advanced materialsIntroductionApplicationsStructural ceramicsBiomaterials CompositesIntermetallicsMachining of advanced materials IntroductionFabrication techniquesMechanical machiningChemical Machining (CM)Electrical machiningRadiation machining Hybrid machiningLaser machiningIntroductionAbsorption of laser energy and multiple reflectionsThermal effectsLaser machining of structural ceramicsIntrodu

  11. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    production. In Kafka: Toward a Minor Literature, Deleuze and Guatari gave the most comprehensive explanation to the abstract machine in the work of art. Like the war-machines of Virilio, the Kafka-machine operates in three gears or speeds. Furthermore, the machine is connected to spatial diagrams...

  12. A Dual Function Energy Store

    Directory of Open Access Journals (Sweden)

    Ron Tolmie

    2014-11-01

    Full Text Available Heat can be collected from local energy sources and concentrated into a relatively small volume, and at a useful working temperature, by using a heat pump as the concentrator. That heat can be stored and utilized at a later date for applications like space heating. The process is doing two things at the same time: storing heat and shifting the power demand. The concentration step can be done at night when there is normally a surplus of power and its timing can be directly controlled by the power grid operator to ensure that the power consumption occurs only when adequate power is available. The sources of heat can be the summer air, the heat extracted from buildings by their cooling systems, natural heat from the ground or solar heat, all of which are free, abundant and readily accessible. Such systems can meet the thermal needs of buildings while at the same time stabilizing the grid power demand, thus reducing the need for using fossil-fuelled peaking power generators. The heat pump maintains the temperature of the periphery at the ambient ground temperature so very little energy is lost during storage.

  13. Norske masterutdanninger i naturfag for grunnskolelærere – store variasjoner i omfang på masteroppgaver og fagsammensetning
    Norwegian master educations in natural science for lower secondary school

    OpenAIRE

    Magne Olufsen; Solveig Karlsen; Monica Andreassen; Andy Sortland

    2015-01-01

    English title: Norwegian master educations in natural science for lower secondary school – large differences in courses offered and size of master thesisCurrently, the majority of students in lower secondary school teacher education take a four-year education in Norway. From 2017 this education will be prolonged to a five-year master education. In connection to this, there is an ongoing debate in Norway about the content of the new teacher education programs. In 2010, the Arctic University of...

  14. Retail brand architecture and consumer store loyalty

    DEFF Research Database (Denmark)

    Brunsø, Karen; Grunert, Klaus G.

    is to investigate the relationship between consumers perceived retail brand architecture, their store satisfaction and loyalty. Furthermore we use perceived store image as a mediating factor in our framework. In total 772 Danish households participated in a telephone interview and returned questionnaires by mail....... The major contribution of this research is to conceptualise and empirically investigate the role of brand architecture for perceived store image, store satisfaction and loyalty....

  15. Towards Compatible and Interderivable Semantic Specifications for the Scheme Programming Language, Part II: Reduction Semantics and Abstract Machines

    DEFF Research Database (Denmark)

    Biernacka, Malgorzata; Danvy, Olivier

    2008-01-01

    We present a context-sensitive reduction semantics for a lambda-calculus with explicit substitutions and store and we show that the functional implementation of this small-step semantics mechanically corresponds to that of an abstract machine. This abstract machine is very close to the abstract...... machine for Core Scheme presented by Clinger at PLDI'98. This lambda-calculus with explicit substitutions and store therefore aptly accounts for Core Scheme....

  16. Norske masterutdanninger i naturfag for grunnskolelærere – store variasjoner i omfang på masteroppgaver og fagsammensetningNorwegian master educations in natural science for lower secondary school

    Directory of Open Access Journals (Sweden)

    Magne Olufsen

    2015-11-01

    Full Text Available English title: Norwegian master educations in natural science for lower secondary school – large differences in courses offered and size of master thesisCurrently, the majority of students in lower secondary school teacher education take a four-year education in Norway. From 2017 this education will be prolonged to a five-year master education. In connection to this, there is an ongoing debate in Norway about the content of the new teacher education programs. In 2010, the Arctic University of Norway (UiT began the first integrated five-year master education for lower secondary teacher education students in Norway. This program is described in the article, with a focus on the subject natural science in the 5–10 level education. UiT has made progress regarding the difficult link between the student’s school practice and their education at the University. As teacher educators, we experience that the new education also seems to give the students a higher identity and motivation towards teaching natural science. There are four teacher education colleges/universities in Norwegian offering a master degree in natural science/pedagogical content knowledge for teachers in lower secondary school. These master educations are relatively different in structure, and especially the subjects offered and the size of the master thesis is considerably different.

  17. Languages for computer-controlled machines

    OpenAIRE

    MUCHKA, Martin

    2012-01-01

    The work deals with the options and describing the languages of computer-controlled machine tools. In the introductory part is the history and development of numerical control and the description of certain control systems with an emphasis on learning the concept with the possibility of use as a study of the text. The next section describes the school's CNC milling machine, both hardware and software, and example theses on the CNC machine in practice. In the context of the work of a well-orga...

  18. Nudging consumer behaviour in retail stores

    DEFF Research Database (Denmark)

    Adam, Abdulfatah

    2016-01-01

    -called “nudging”) theory popularized by Thaler and Sunstein (2008). Five stores were chosen for the intervention while five comparable stores acted as controls. Results based on total of 28 breakfast cereals showed a decline in calories at intervention stores relative to both pre-intervention period and control...

  19. EVALUATING FACTORS INFLUENCING GROCERY STORE CHOICE

    OpenAIRE

    Palma, Marco A.; Emerson, Robert D.; House, Lisa

    2003-01-01

    This paper analyzes consumer preferences toward grocery store choices given a set of attributes of stores. This information will then be used to make inferences on how the opening of a Wal-Mart supercenter would affect the other grocery stores in a small city.

  20. LHC Machine Protection System: Method for Balancing Machine Safety and Beam Availability

    CERN Document Server

    Wagner, Sigrid; Schmidt, R

    The Large Hadron Collider (LHC) at CERN in Geneva, Switzerland, exceeds existing particle accelerators in terms of size and complexity. The most remarkable machine damage potential is held by the amount of stored energy. This thesis introduces a quantitative method for the reliability analysis of the LHC Machine Protection System (MPS) in terms of machine safety and beam availability. It is based on object-oriented modelling of the primary signal path, where the components’ behaviour is described by a simple Markov model with two failure states. The explicit inclusion of machine failure allows for the quantification of five scenarios. They include the safety-relevant scenario of a missed emergency shutdown and the scenario of a preventive shutdown, which is crucial with regard to beam availability. The presented MPS model covers two of the main MPS subsystems, namely the Beam Loss Monitor System and the Beam Interlock System. The model includes almost 5000 individually modelled components. It is implemented...

  1. Store Security. Credit Card Fraud.

    Science.gov (United States)

    Brockway, Jerry

    The manual, intended for use by adults and not in the high school classroom situation, presents material directed toward assisting in the reduction of credit card crime. This teaching guide is organized in three sections which deal with the nature of and major reasons for credit card fraud, the types of hot card runners, and methods of reducing…

  2. Machine tool structures

    CERN Document Server

    Koenigsberger, F

    1970-01-01

    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

  3. Machine Protection with a 700 MJ Beam

    CERN Document Server

    Baer, T; Wenninger, J; Wollmann, D; Zerlauth, M

    2015-01-01

    After the high luminosity upgrade of the LHC, the stored energy per proton beam will increase by a factor of two as compared to the nominal LHC. Therefore, many damage studies need to be revisited to ensure a safe machine operation with the new beam parameters. Furthermore, new accelerator equipment like crab cavities might cause new failure modes, which are not sufficiently covered by the current machine protection system of the LHC. These failure modes have to be carefully studied and mitigated by new protection systems. Finally the ambitious goals for integrated luminosity delivered to the experiments during the era of HL-LHC require an increase of the machine availability without jeopardizing equipment protection.

  4. SIMULATIONS OF THE AGS MMPS STORING ENERGY IN CAPACITOR BANKS

    Energy Technology Data Exchange (ETDEWEB)

    MARNERIS,I.; BADEA, V.S.; BONATI, R.; ROSER, T.; SANDBERG, J.

    2007-06-25

    The Brookhaven AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps, +/-9000 Volts. The peak magnet power is 50 MWatts. The power supply is fed from a motor/generator manufactured by Siemens. The generator is 3 phase 7500 Volts rated at 50 MVA. The peak power requirements come from the stored energy in the rotor of the motor/generator. The motor generator is about 45 years old, made by Siemens and it is not clear if companies will be manufacturing similar machines in the future. We are therefore investigating different ways of storing energy for future AGS MMPS operations. This paper will present simulations of a power supply where energy is stored in capacitor banks. Two dc to dc converters will be presented along with the control system of the power section. The switching elements will be IGCT's made by ABB. The simulation program used is called PSIM version 6.1. The average power from the local power authority into the power supply will be kept constant during the pulsing of the magnets at +/-50 MW. The reactive power will also be kept constant below 1.5 MVAR. Waveforms will be presented.

  5. Consumer evaluations of store brands: effects of store image and product attributes

    OpenAIRE

    Semeijn, J.; van Riel, A.C.R.; Ambrosini, A.B.

    2003-01-01

    Store brands have grown in importance. Large numbers of products carrying a store label have been introduced in recent years, with varying degrees of success. It appears that retailers pay little attention to the multiple risks associated with adding new product categories to their store labels. In this study we investigate how attributes of store and product affect consumer evaluations of store branded products. A structural model is developed and tested, indicating the likelihood of success...

  6. Design of Demining Machines

    CERN Document Server

    Mikulic, Dinko

    2013-01-01

    In constant effort to eliminate mine danger, international mine action community has been developing safety, efficiency and cost-effectiveness of clearance methods. Demining machines have become necessary when conducting humanitarian demining where the mechanization of demining provides greater safety and productivity. Design of Demining Machines describes the development and testing of modern demining machines in humanitarian demining.   Relevant data for design of demining machines are included to explain the machinery implemented and some innovative and inspiring development solutions. Development technologies, companies and projects are discussed to provide a comprehensive estimate of the effects of various design factors and to proper selection of optimal parameters for designing the demining machines.   Covering the dynamic processes occurring in machine assemblies and their components to a broader understanding of demining machine as a whole, Design of Demining Machines is primarily tailored as a tex...

  7. Applied machining technology

    CERN Document Server

    Tschätsch, Heinz

    2010-01-01

    Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

  8. Machining with abrasives

    CERN Document Server

    Jackson, Mark J

    2011-01-01

    Abrasive machining is key to obtaining the desired geometry and surface quality in manufacturing. This book discusses the fundamentals and advances in the abrasive machining processes. It provides a complete overview of developing areas in the field.

  9. Women, Men, and Machines.

    Science.gov (United States)

    Form, William; McMillen, David Byron

    1983-01-01

    Data from the first national study of technological change show that proportionately more women than men operate machines, are more exposed to machines that have alienating effects, and suffer more from the negative effects of technological change. (Author/SSH)

  10. Machine medical ethics

    CERN Document Server

    Pontier, Matthijs

    2015-01-01

    The essays in this book, written by researchers from both humanities and sciences, describe various theoretical and experimental approaches to adding medical ethics to a machine in medical settings. Medical machines are in close proximity with human beings, and getting closer: with patients who are in vulnerable states of health, who have disabilities of various kinds, with the very young or very old, and with medical professionals. In such contexts, machines are undertaking important medical tasks that require emotional sensitivity, knowledge of medical codes, human dignity, and privacy. As machine technology advances, ethical concerns become more urgent: should medical machines be programmed to follow a code of medical ethics? What theory or theories should constrain medical machine conduct? What design features are required? Should machines share responsibility with humans for the ethical consequences of medical actions? How ought clinical relationships involving machines to be modeled? Is a capacity for e...

  11. Brain versus Machine Control.

    Directory of Open Access Journals (Sweden)

    Jose M Carmena

    2004-12-01

    Full Text Available Dr. Octopus, the villain of the movie "Spiderman 2", is a fusion of man and machine. Neuroscientist Jose Carmena examines the facts behind this fictional account of a brain- machine interface

  12. Apps for Mathematics Learning: A Review of "Educational" Apps from the iTunes App Store

    Science.gov (United States)

    Highfield, Kate; Goodwin, Kristy

    2013-01-01

    Increasingly iPads™ are being used in schools and prior-to-school settings, with a plethora of Apps available for mathematics learning. Despite the growing number of Apps available in the iTunes App Store, there has been limited systematic analysis of the pedagogic design of Apps designed for mathematics learning. This paper describes a content…

  13. A Universal Reactive Machine

    DEFF Research Database (Denmark)

    Andersen, Henrik Reif; Mørk, Simon; Sørensen, Morten U.

    1997-01-01

    Turing showed the existence of a model universal for the set of Turing machines in the sense that given an encoding of any Turing machine asinput the universal Turing machine simulates it. We introduce the concept of universality for reactive systems and construct a CCS processuniversal...

  14. An evaluation of four measures of adolescents' exposure to cigarette marketing in stores.

    Science.gov (United States)

    Feighery, Ellen C; Henriksen, Lisa; Wang, Yun; Schleicher, Nina C; Fortmann, Stephen P

    2006-12-01

    This study evaluates four measures of exposure to retail cigarette marketing in relation to adolescent smoking behavior. The measures are (a) shopping frequency in types of stores known to carry more cigarette advertising than other store types, (b) shopping frequency in specific stores that sell cigarettes in the study community, (c) the amount of exposure to cigarette brand impressions in stores where students shopped, and (d) perceived exposure to cigarette advertising. The study combined data from classroom surveys administered to 6th-, 7th-, and 8th-grade students in three California middle schools, and direct store observations quantifying cigarette marketing materials and product placement in stores where students shopped. Logistic regression models were used to examine how each exposure measure related to the odds of ever smoking and susceptibility to smoke, controlling for grade, gender, ethnicity, school performance, unsupervised time, and exposure to household and friend smoking. Frequent exposure to retail cigarette marketing as defined by each of the four measures was independently associated with a significant increase in the odds of ever smoking. All but the measure of exposure to store types was associated with a significant increase in the odds of susceptibility to smoke. Four measures of exposure to retail cigarette marketing may serve equally well to predict adolescent smoking but may vary in cost, complexity, and meaning. Depending on the outcomes of interest, the most useful measure may be a combination of self-reported exposure to types of stores that contain cigarette marketing and perceived exposure to such messages.

  15. Mechanism of store-operated calcium entry

    Indian Academy of Sciences (India)

    Devkanya Dutta

    2000-12-01

    Activation of receptors coupled to the phospholipase C/IP3 signalling pathway results in a rapid release of calcium from its intracellular stores, eventually leading to depletion of these stores. Calcium store depletion triggers an influx of extracellular calcium across the plasma membrane, a mechanism known as the store-operated calcium entry or capacitative calcium entry. Capacitative calcium current plays a key role in replenishing calcium stores and activating various physiological processes. Despite considerable efforts, very little is known about the molecular nature of the capacitative channel and the signalling pathway that activates it. This review summarizes our current knowledge about store operated calcium entry and suggests possible hypotheses for its mode of activation.

  16. Maintaining Stored Procedures in Database Application

    Directory of Open Access Journals (Sweden)

    Santosh Kakade

    2012-06-01

    Full Text Available Stored procedure and triggers have an irreplaceable importance in any database application, as they provide a powerful way to code application logic that can be stored on the server and execute according to the need of application. Writing stored procedures for database application involves set of sql statements with an assigned name that's stored in the database in compiled form so that it can be shared by a number of programs. The use of stored procedures can be helpful in controlling access to data end-users may enter or change data but do not write procedures, preserving data integrity and improving productivity statements in a stored procedure only need to be written one time

  17. Students’ beliefs and behaviour regarding low-calorie beverages, sweets or snacks: are they affected by lessons on healthy food and by changes to school vending machines?

    NARCIS (Netherlands)

    Kocken, P.L.; Kesteren, N.M.C. van; Buijs, G.; Snel, J.; Dusseldorp, E.

    2015-01-01

    Objective To study the effects of school lessons about healthy food on adolescents’ self-reported beliefs and behaviour regarding the purchase and consumption of soft drinks, water and extra foods, including sweets and snacks. The lessons were combined with the introduction of lower-calorie foods,

  18. Students’ beliefs and behaviour regarding low-calorie beverages, sweets or snacks: are they affected by lessons on healthy food and by changes to school vending machines?

    NARCIS (Netherlands)

    Kocken, P.L.; Kesteren, N.M.C. van; Buijs, G.; Snel, J.; Dusseldorp, E.

    2015-01-01

    Objective To study the effects of school lessons about healthy food on adolescents’ self-reported beliefs and behaviour regarding the purchase and consumption of soft drinks, water and extra foods, including sweets and snacks. The lessons were combined with the introduction of lower-calorie foods, f

  19. Students’ beliefs and behaviour regarding low-calorie beverages, sweets or snacks: are they affected by lessons on healthy food and by changes to school vending machines?

    NARCIS (Netherlands)

    Kocken, P.L.; Kesteren, N.M.C. van; Buijs, G.; Snel, J.; Dusseldorp, E.

    2015-01-01

    Objective To study the effects of school lessons about healthy food on adolescents’ self-reported beliefs and behaviour regarding the purchase and consumption of soft drinks, water and extra foods, including sweets and snacks. The lessons were combined with the introduction of lower-calorie foods, f

  20. Signature-based store checking buffer

    Science.gov (United States)

    Sridharan, Vilas; Gurumurthi, Sudhanva

    2015-06-02

    A system and method for optimizing redundant output verification, are provided. A hardware-based store fingerprint buffer receives multiple instances of output from multiple instances of computation. The store fingerprint buffer generates a signature from the content included in the multiple instances of output. When a barrier is reached, the store fingerprint buffer uses the signature to verify the content is error-free.

  1. Mass Retailers' Advertising Strategies Against Commodity Stores.

    OpenAIRE

    Fabian Bergès; Sylvette Monier-Dilhan

    2013-01-01

    A retailer has different opportunities to advertise in the media: emphasizing the store image or promoting specifically its private label (PL). In the first option, advertising benefits all products sold, whereas in the alternative, only store brands are concerned by image improvement. We analyze the retailer's advertising campaign strategies when its competitor's format is a small commodity store. PL quality is endogenous and chosen according to the competitor's product range. We show the re...

  2. Business intelligence in-Store Media

    OpenAIRE

    Almiñana Pablo, Mario

    2016-01-01

    Aquest treball és un projecte d'ampliació d'un projecte de business intelligence ja disponible en la empresa in-Store Media. Este trabajo es un proyecto de ampliación de un proyecto de business intelligence ya disponible en la empresa in-Store Media. This work is an extension project of a BI project available on the company inStore Media.

  3. Distributed energy store railgun; The limiting case

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, R.A. (WBM Stalker Pty. Ltd., 99 Leichardt Street, Brisbane, Qld. (AU))

    1991-01-01

    This paper reports that when the limiting case of a distributed energy store railgun is analyzed, i.e., the case where the space between adjacent energy stores become indefinitely small, three important results are obtained. First, the shape of the current pulse delivered by each store is sinusoidal and an exponential tail. Second, the rail-to-rail voltage behind the rear-most active store approaches zero. Third, it is not possible to choose parameters in such a way that capacitor crowbars can be eliminated.

  4. Asynchronized synchronous machines

    CERN Document Server

    Botvinnik, M M

    1964-01-01

    Asynchronized Synchronous Machines focuses on the theoretical research on asynchronized synchronous (AS) machines, which are "hybrids” of synchronous and induction machines that can operate with slip. Topics covered in this book include the initial equations; vector diagram of an AS machine; regulation in cases of deviation from the law of full compensation; parameters of the excitation system; and schematic diagram of an excitation regulator. The possible applications of AS machines and its calculations in certain cases are also discussed. This publication is beneficial for students and indiv

  5. Quantum machine learning.

    Science.gov (United States)

    Biamonte, Jacob; Wittek, Peter; Pancotti, Nicola; Rebentrost, Patrick; Wiebe, Nathan; Lloyd, Seth

    2017-09-13

    Fuelled by increasing computer power and algorithmic advances, machine learning techniques have become powerful tools for finding patterns in data. Quantum systems produce atypical patterns that classical systems are thought not to produce efficiently, so it is reasonable to postulate that quantum computers may outperform classical computers on machine learning tasks. The field of quantum machine learning explores how to devise and implement quantum software that could enable machine learning that is faster than that of classical computers. Recent work has produced quantum algorithms that could act as the building blocks of machine learning programs, but the hardware and software challenges are still considerable.

  6. Precision machine design

    CERN Document Server

    Slocum, Alexander H

    1992-01-01

    This book is a comprehensive engineering exploration of all the aspects of precision machine design - both component and system design considerations for precision machines. It addresses both theoretical analysis and practical implementation providing many real-world design case studies as well as numerous examples of existing components and their characteristics. Fast becoming a classic, this book includes examples of analysis techniques, along with the philosophy of the solution method. It explores the physics of errors in machines and how such knowledge can be used to build an error budget for a machine, how error budgets can be used to design more accurate machines.

  7. Haptics-Augmented Simple-Machine Educational Tools.

    Science.gov (United States)

    Williams, Robert L., II; Chen, Meng-Yun; Seaton, Jeffrey M.

    2003-01-01

    Describes a unique project using commercial haptic interfaces to augment the teaching of simple machines in elementary school. Suggests that the use of haptics in virtual simple-machine simulations has the potential for deeper, more engaging learning. (Contains 13 references.) (Author/YDS)

  8. Reluctance Machine for a Hollow Cylinder Flywheel

    Directory of Open Access Journals (Sweden)

    Magnus Hedlund

    2017-03-01

    Full Text Available A hollow cylinder flywheel rotor with a novel outer rotor switched reluctance machine (SRM mounted on the interior rim is presented, with measurements, numerical analysis and analytical models. Practical experiences from the construction process are also discussed. The flywheel rotor does not have a shaft and spokes and is predicted to store 181 Wh / kg at ultimate tensile strength (UTS according to simulations. The novel SRM is an axial flux machine, chosen due to its robustness and tolerance for high strain. The computed maximum tip speed of the motor at UTS is 1050 m / s . A small-scale proof-of-concept electric machine prototype has been constructed, and the machine inductance has been estimated from measurements of voltage and current and compared against results from analytical models and finite element analysis (FEA. The prototype measurements were used to simulate operation during maximal speed for a comparison towards other high-speed electric machines, in terms of tip speed and power. The mechanical design of the flywheel was performed with an analytical formulation assuming planar stress in concentric shells of orthotropic (unidirectionally circumferentially wound carbon composites. The analytical approach was verified with 3D FEA in terms of stress and strain.

  9. Forbidden Zones for Numerically-Controlled Machine Tools

    Science.gov (United States)

    Philpot, D.

    1986-01-01

    Computer-controlled machine tool prevented from striking and damaging protruding members on workpiece by creating forbidden zone in control program. With aid of computer graphics, tool profile and coordinates of forbidden zone digitized and stored in computer memory as part of tool path.

  10. Building Store Satisfaction Centred on Customer Retention in Clothing Retailing: Store Design and Ease of Shopping

    Directory of Open Access Journals (Sweden)

    Gulden Turhan

    2016-01-01

    Full Text Available The study’s research model suggests that store design and ease of shopping are associated with customer retention through a mediated pathway in which store design and ease of shopping influence perceived store satisfaction, which in turn, influences customer retention. This survey was administered to two separate clothing stores offered to either females or males (in total, 533 participants. Using structural equation modelling methodology, data was analysed to explain the interrelations among the variables in the model. The results of an empirical study of a sample of store shoppers revealed that store design and ease of shopping influence customer retention in an indirect way through customer perception of satisfaction with the store. In building store satisfaction that is centred on customer retention, store design and shopping ease differ in their relative influences. This difference is high for females, but for men as low as to be considered negligible in males. As a result, improving customers’ perceptions of store design and ease of shopping is a way to ensure store satisfaction support customer retention. The results of the study provide a new insight into the relationships by suggesting indirect effects of shopping ease and store design on consumer retention by their impacts on store satisfaction, rather than direct effects.

  11. Win-Win Strategies at Discount Stores

    NARCIS (Netherlands)

    B. Deleersnyder (Barbara); M.G. Dekimpe (Marnik); J-B.E.M. Steenkamp (Jan-Benedict); O. Koll

    2005-01-01

    textabstractAn important development that contributes to store brands’ growing success in the grocery market is the increasing number of discount stores that sell predominantly own, private-label, brands. To fight private labels, manufacturers of national brands feel increasingly compelled to develo

  12. Consumers' store choice behavior for fresh food

    NARCIS (Netherlands)

    Meulenberg, M.T.G.; Trijp, van J.C.M.

    1991-01-01

    Consumers' preference for fresh food stores is analyzed. In particular the choice between supermarkets and specialized shops for purchasing fresh food is analyzed. Attention is given to the factors influencing this choice. For this purpose a number of research questions with respect to store choice

  13. Perspex machine: VII. The universal perspex machine

    Science.gov (United States)

    Anderson, James A. D. W.

    2006-01-01

    The perspex machine arose from the unification of projective geometry with the Turing machine. It uses a total arithmetic, called transreal arithmetic, that contains real arithmetic and allows division by zero. Transreal arithmetic is redefined here. The new arithmetic has both a positive and a negative infinity which lie at the extremes of the number line, and a number nullity that lies off the number line. We prove that nullity, 0/0, is a number. Hence a number may have one of four signs: negative, zero, positive, or nullity. It is, therefore, impossible to encode the sign of a number in one bit, as floating-point arithmetic attempts to do, resulting in the difficulty of having both positive and negative zeros and NaNs. Transrational arithmetic is consistent with Cantor arithmetic. In an extension to real arithmetic, the product of zero, an infinity, or nullity with its reciprocal is nullity, not unity. This avoids the usual contradictions that follow from allowing division by zero. Transreal arithmetic has a fixed algebraic structure and does not admit options as IEEE, floating-point arithmetic does. Most significantly, nullity has a simple semantics that is related to zero. Zero means "no value" and nullity means "no information." We argue that nullity is as useful to a manufactured computer as zero is to a human computer. The perspex machine is intended to offer one solution to the mind-body problem by showing how the computable aspects of mind and, perhaps, the whole of mind relates to the geometrical aspects of body and, perhaps, the whole of body. We review some of Turing's writings and show that he held the view that his machine has spatial properties. In particular, that it has the property of being a 7D lattice of compact spaces. Thus, we read Turing as believing that his machine relates computation to geometrical bodies. We simplify the perspex machine by substituting an augmented Euclidean geometry for projective geometry. This leads to a general

  14. Store-operate-coherence-on-value

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dong; Heidelberger, Philip; Kumar, Sameer; Ohmacht, Martin; Steinmacher-Burow, Burkhard

    2014-11-18

    A system, method and computer program product for performing various store-operate instructions in a parallel computing environment that includes a plurality of processors and at least one cache memory device. A queue in the system receives, from a processor, a store-operate instruction that specifies under which condition a cache coherence operation is to be invoked. A hardware unit in the system runs the received store-operate instruction. The hardware unit evaluates whether a result of the running the received store-operate instruction satisfies the condition. The hardware unit invokes a cache coherence operation on a cache memory address associated with the received store-operate instruction if the result satisfies the condition. Otherwise, the hardware unit does not invoke the cache coherence operation on the cache memory device.

  15. Consumers' quality perception of national branded, national store branded, and imported store branded beef

    DEFF Research Database (Denmark)

    Banovic, Marija; Grunert, Klaus G.; Barreira, Maria Madalena;

    2010-01-01

    This study investigated the differences in the consumers' quality perception of national branded, national store branded, and imported store branded beef. Partial Least Squares analysis is used for modelling the quality perception process. Results show that consumers perceived national branded...

  16. Using a Virtual Store As a Research Tool to Investigate Consumer In-store Behavior.

    Science.gov (United States)

    Ploydanai, Kunalai; van den Puttelaar, Jos; van Herpen, Erica; van Trijp, Hans

    2017-07-24

    People's responses to products and/or choice environments are crucial to understanding in-store consumer behaviors. Currently, there are various approaches (e.g., surveys or laboratory settings) to study in-store behaviors, but the external validity of these is limited by their poor capability to resemble realistic choice environments. In addition, building a real store to meet experimental conditions while controlling for undesirable effects is costly and highly difficult. A virtual store developed by virtual reality techniques potentially transcends these limitations by offering the simulation of a 3D virtual store environment in a realistic, flexible, and cost-efficient way. In particular, a virtual store interactively allows consumers (participants) to experience and interact with objects in a tightly controlled yet realistic setting. This paper presents the key elements of using a desktop virtual store to study in-store consumer behavior. Descriptions of the protocol steps to: 1) build the experimental store, 2) prepare the data management program, 3) run the virtual store experiment, and 4) organize and export data from the data management program are presented. The virtual store enables participants to navigate through the store, choose a product from alternatives, and select or return products. Moreover, consumer-related shopping behaviors (e.g., shopping time, walking speed, and number and type of products examined and bought) can also be collected. The protocol is illustrated with an example of a store layout experiment showing that shelf length and shelf orientation influence shopping- and movement-related behaviors. This demonstrates that the use of a virtual store facilitates the study of consumer responses. The virtual store can be especially helpful when examining factors that are costly or difficult to change in real life (e.g., overall store layout), products that are not presently available in the market, and routinized behaviors in familiar

  17. Application of an APP Store Software Model within the DoD

    Science.gov (United States)

    2012-05-17

    GRADUATE SCHOOL PANEL: “Application of an APP Store Software Model within the DoD” Monterey, California Report Documentation Page Form ApprovedOMB No...00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Application of an APP Store Software Model within the DoD 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...distribution is unlimited (17 May 2012) US Army “ APP Store for War” To streamline its operations in a rapidly advancing world, the Army is

  18. Teaching Grocery Store Purchasing Skills to Students with Intellectual Disabilities Using a Computer-Based Instruction Program

    Science.gov (United States)

    Hansen, David L.; Morgan, Robert L.

    2008-01-01

    This research evaluated effects of a multi-media computer-based instruction (CBI) program designed to teach grocery store purchasing skills to three high-school students with intellectual disabilities. A multiple baseline design across participants used measures of computer performance mastery and grocery store probes to evaluate the CBI. All…

  19. Healthy food availability in small urban food stores: a comparison of four US cities.

    Science.gov (United States)

    Laska, Melissa Nelson; Borradaile, Kelley E; Tester, June; Foster, Gary D; Gittelsohn, Joel

    2010-07-01

    Given that small food stores may be important retail food sources in low-income urban communities, our objective was to examine cross-city comparative data documenting healthy food availability within such facilities, particularly those located in low-income areas and nearby schools. Food stores in Baltimore, Maryland; Minneapolis/St. Paul, Minnesota; Oakland, California; and Philadelphia, Pennsylvania were selected for assessment based on proximity to low-income schools. Stores were defined as: (i) single-aisle (n 45); (ii) small (2-5 aisles; n 52); and (iii) large (> or = 6 aisles; n 8). Staff conducted in-store audits to assess the presence/absence of twenty-eight healthy items, organized within five categories: (i) fresh fruits/vegetables, (ii) processed fruits/vegetables, (iii) healthy beverages/low-fat dairy, (iv) healthy snacks and (v) other healthy staple foods. The availability of healthy food items was low, particularly in single-aisle and small stores, and there was significant cross-site variability in the availability of healthy snacks (P store size for nearly all food/beverage categories (P stores need to be developed and tailored for use in urban areas across the USA.

  20. Machinability of advanced materials

    CERN Document Server

    Davim, J Paulo

    2014-01-01

    Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters.  A variety of factors determine a material's machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

  1. Pattern recognition & machine learning

    CERN Document Server

    Anzai, Y

    1992-01-01

    This is the first text to provide a unified and self-contained introduction to visual pattern recognition and machine learning. It is useful as a general introduction to artifical intelligence and knowledge engineering, and no previous knowledge of pattern recognition or machine learning is necessary. Basic for various pattern recognition and machine learning methods. Translated from Japanese, the book also features chapter exercises, keywords, and summaries.

  2. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  3. Machining of titanium alloys

    CERN Document Server

    2014-01-01

    This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

  4. Rotating electrical machines

    CERN Document Server

    Le Doeuff, René

    2013-01-01

    In this book a general matrix-based approach to modeling electrical machines is promulgated. The model uses instantaneous quantities for key variables and enables the user to easily take into account associations between rotating machines and static converters (such as in variable speed drives).   General equations of electromechanical energy conversion are established early in the treatment of the topic and then applied to synchronous, induction and DC machines. The primary characteristics of these machines are established for steady state behavior as well as for variable speed scenarios. I

  5. Chaotic Boltzmann machines.

    Science.gov (United States)

    Suzuki, Hideyuki; Imura, Jun-ichi; Horio, Yoshihiko; Aihara, Kazuyuki

    2013-01-01

    The chaotic Boltzmann machine proposed in this paper is a chaotic pseudo-billiard system that works as a Boltzmann machine. Chaotic Boltzmann machines are shown numerically to have computing abilities comparable to conventional (stochastic) Boltzmann machines. Since no randomness is required, efficient hardware implementation is expected. Moreover, the ferromagnetic phase transition of the Ising model is shown to be characterised by the largest Lyapunov exponent of the proposed system. In general, a method to relate probabilistic models to nonlinear dynamics by derandomising Gibbs sampling is presented.

  6. Tribology in machine design

    CERN Document Server

    Stolarski, Tadeusz

    1999-01-01

    ""Tribology in Machine Design is strongly recommended for machine designers, and engineers and scientists interested in tribology. It should be in the engineering library of companies producing mechanical equipment.""Applied Mechanics ReviewTribology in Machine Design explains the role of tribology in the design of machine elements. It shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications within mechanical devices and systems.The computer offers today's designer the possibility of greater stringen

  7. Debugging the virtual machine

    Energy Technology Data Exchange (ETDEWEB)

    Miller, P.; Pizzi, R.

    1994-09-02

    A computer program is really nothing more than a virtual machine built to perform a task. The program`s source code expresses abstract constructs using low level language features. When a virtual machine breaks, it can be very difficult to debug because typical debuggers provide only low level machine implementation in formation to the software engineer. We believe that the debugging task can be simplified by introducing aspects of the abstract design into the source code. We introduce OODIE, an object-oriented language extension that allows programmers to specify a virtual debugging environment which includes the design and abstract data types of the virtual machine.

  8. Electrical machines & drives

    CERN Document Server

    Hammond, P

    1985-01-01

    Containing approximately 200 problems (100 worked), the text covers a wide range of topics concerning electrical machines, placing particular emphasis upon electrical-machine drive applications. The theory is concisely reviewed and focuses on features common to all machine types. The problems are arranged in order of increasing levels of complexity and discussions of the solutions are included where appropriate to illustrate the engineering implications. This second edition includes an important new chapter on mathematical and computer simulation of machine systems and revised discussions o

  9. Machine learning with R

    CERN Document Server

    Lantz, Brett

    2013-01-01

    Written as a tutorial to explore and understand the power of R for machine learning. This practical guide that covers all of the need to know topics in a very systematic way. For each machine learning approach, each step in the process is detailed, from preparing the data for analysis to evaluating the results. These steps will build the knowledge you need to apply them to your own data science tasks.Intended for those who want to learn how to use R's machine learning capabilities and gain insight from your data. Perhaps you already know a bit about machine learning, but have never used R; or

  10. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  11. NASA Armstrong's Approach to Store Separation Analysis

    Science.gov (United States)

    Acuff, Chris; Bui, Trong

    2015-01-01

    Presentation will an overview of NASA Armstrong's store separation capabilities and how they have been applied recently. Objective of the presentation is to brief Generation Orbit and other potential partners on NASA Armstrong's store separation capabilities. It will include discussions on the use of NAVSEP and Cart3D, as well as some Python scripting work to perform the analysis, and a short overview of this methodology applied to the Towed Glider Air Launch System. Collaboration with potential customers in this area could lead to funding for the further development of a store separation capability at NASA Armstrong, which would boost the portfolio of engineering expertise at the center.

  12. Virtual machine vs Real Machine: Security Systems

    Directory of Open Access Journals (Sweden)

    Dr. C. Suresh Gnana Das

    2009-08-01

    Full Text Available This paper argues that the operating system and applications currently running on a real machine should relocate into a virtual machine. This structure enables services to be added below the operating system and to do so without trusting or modifying the operating system or applications. To demonstrate the usefulness of this structure, we describe three services that take advantage of it: secure logging, intrusion prevention and detection, and environment migration. In particular, we can provide services below the guest operating system without trusting or modifying it. We believe providing services at this layer are especially useful for enhancing security and mobility. This position paper describes the general benefits and challenges that arise from running most applications in a virtual machine, and then describes some example services and alternative ways to provide those services.

  13. Availability of convenience stores and adolescent alcohol use in Taiwan: a multi-level analysis of national surveys.

    Science.gov (United States)

    Wang, Shi-Heng; Lin, I-Chin; Chen, Chuan-Yu; Chen, Duan-Rung; Chan, Ta-Chien; Chen, Wei J

    2013-12-01

    To examine the association between alcohol in school environments and adolescent alcohol use over the previous 6 months. A multi-level logistic regression analysis was performed of cross-sectional surveys conducted in 2004, 2005 and 2006. A total of 52 214 students aged 11-19 years from 387 middle or high schools were selected from a nationally representative, multi-stage, stratified probability sampling across Taiwan. Information on socio-demographic features and substance use experiences was collected using self-administered questionnaires. The alcohol in the environment was measured using the availability of convenience stores surrounding the schools. Using geographical information systems, the weighted numbers of convenience stores within 1 km, a 12-15-minute walk, of a school were calculated. The schools were later categorized into three subgroups via the tertile of nearby convenience stores. Considering the compositional characteristics, the availability of convenience stores was found to account for 1.5% of the school-level variance of youthful drinking. The odds ratios (95% confidence interval) of alcohol use over the previous 6 months among youth attending schools with medium and high availability were 1.04 (0.96-1.13) and 1.08 (1.00-1.17), respectively, with a P-value of 0.04 in the trend test. The greater availability of convenience stores near a school is associated with an increased risk of alcohol use among adolescents over the previous 6 months. © 2013 Society for the Study of Addiction.

  14. Application of case-based reasoning for machining parameters selection

    Science.gov (United States)

    Grabowik, C.; Kalinowski, K.; Krenczyk, D.; Paprocka, I.; Kempa, W.

    2016-08-01

    Process planning, as one of the most important stage of the technological production preparation, consists in selection of manufacturing operations taking into account the minimal manufacturing cost. The minimal manufacturing cost could be achieved by selection of the best sequence of manufacturing operations, machine tools, manufacturing tools, and accompanying machining parameters selection. On the other hand, it is almost impossible, especially in industrial conditions, to design an optimal process plan, first of all due to restrictions imposed by the installed in the factory machine park. Taking into consideration above, machining parameter selection seems to be one of the potential areas of optimization. In manual process planning process engineers select machining parameters using selection rules and data stored in manuals and tool catalogues. It makes this process time and labour consuming and non-error free. On the other hand, in workshop practice, machine operators select parameters having their skills and habits in mind. It could be a reason for suboptimal process planning. Considering this, new methods of machining parameters selection free of human factor influence are still sought. In our approach, we propose to apply case-based reasoning for machining parameter selection. In the paper, a detailed description of our approach is presented.

  15. Human Resources Operational Data Store Core Services

    Data.gov (United States)

    Social Security Administration — This database contains only a very small subset of the Human Resources Operational Data Store data. It supports the SSA Employee and Office Data Retrieval (SEODR)...

  16. Stored energy in irradiated silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; Burchell, T.D. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    This report presents a short review of the phenomenon of Wigner stored energy release from irradiated graphite and discusses it in relation to neutron irradiation of silicon carbide. A single published work in the area of stored energy release in SiC is reviewed and the results are discussed. It appears from this previous work that because the combination of the comparatively high specific heat of SiC and distribution in activation energies for recombining defects, the stored energy release of SiC should only be a problem at temperatures lower than those considered for fusion devices. The conclusion of this preliminary review is that the stored energy release in SiC will not be sufficient to cause catastrophic heating in fusion reactor components, though further study would be desirable.

  17. A Better Reduction Theorem for Store Buffers

    CERN Document Server

    Cohen, Ernie

    2009-01-01

    When verifying a concurrent program, it is usual to assume that memory is sequentially consistent. However, most modern multiprocessors depend on store buffering for efficiency, and provide native sequential consistency only at a substantial performance penalty. To regain sequential consistency, a programmer has to follow an appropriate programming discipline. However, na\\"ive disciplines, such as protecting all shared accesses with locks, are not flexible enough for building high-performance multiprocessor software. We present a new discipline for concurrent programming under TSO (total store order, with store buffer forwarding). It does not depend on concurrency primitives, such as locks. Instead, threads use ghost operations to acquire and release ownership of memory addresses. A thread can write to an address only if no other thread owns it, and can read from an address only if it owns it or it is shared and the thread has flushed its store buffer since it last wrote to an address it did not own. This dis...

  18. TV'S DEPARTMENT STORES: Shopping from the couch

    National Research Council Canada - National Science Library

    Pat Gao

    2005-01-01

    For hordes of Taiwan's rural residents and office workers, a hard day in the fields or at the stock exchange leaves little time for a trip to the city or a stroll around the warrens of a department store...

  19. Infant Formula - Buying, Preparing, Storing, and Feeding

    Science.gov (United States)

    ... 000806.htm Infant Formula – Buying, Preparing, Storing, and Feeding To use the sharing features on this page, ... brush to get at hard-to-reach places. Feeding Formula to Baby Here is a guide to ...

  20. 7 CFR 1170.6 - Store.

    Science.gov (United States)

    2010-01-01

    ... means to place nonfat dry milk or dry whey in a manufacturing plant, packaging plant, distribution point... Orders; Milk), DEPARTMENT OF AGRICULTURE DAIRY PRODUCT MANDATORY REPORTING § 1170.6 Store. (a)...

  1. Human capabilities in space. [man machine interaction

    Science.gov (United States)

    Nicogossian, A. E.

    1984-01-01

    Man's ability to live and perform useful work in space was demonstrated throughout the history of manned space flight. Current planning envisions a multi-functional space station. Man's unique abilities to respond to the unforeseen and to operate at a level of complexity exceeding any reasonable amount of previous planning distinguish him from present day machines. His limitations, however, include his inherent inability to survive without protection, his limited strength, and his propensity to make mistakes when performing repetitive and monotonous tasks. By contrast, an automated system does routine and delicate tasks, exerts force smoothly and precisely, stores, and recalls large amounts of data, and performs deductive reasoning while maintaining a relative insensitivity to the environment. The establishment of a permanent presence of man in space demands that man and machines be appropriately combined in spaceborne systems. To achieve this optimal combination, research is needed in such diverse fields as artificial intelligence, robotics, behavioral psychology, economics, and human factors engineering.

  2. Support vector machine for automatic pain recognition

    Science.gov (United States)

    Monwar, Md Maruf; Rezaei, Siamak

    2009-02-01

    Facial expressions are a key index of emotion and the interpretation of such expressions of emotion is critical to everyday social functioning. In this paper, we present an efficient video analysis technique for recognition of a specific expression, pain, from human faces. We employ an automatic face detector which detects face from the stored video frame using skin color modeling technique. For pain recognition, location and shape features of the detected faces are computed. These features are then used as inputs to a support vector machine (SVM) for classification. We compare the results with neural network based and eigenimage based automatic pain recognition systems. The experiment results indicate that using support vector machine as classifier can certainly improve the performance of automatic pain recognition system.

  3. LHC machine protection challenges for 2011

    Energy Technology Data Exchange (ETDEWEB)

    Baer, Tobias [CERN, Genf (Switzerland); Universitaet Hamburg (Germany)

    2011-07-01

    The Large Hadron Collider has an unprecedented stored beam energy of up to 362MJ per beam. In 2011, 100MJ could be reached. In this talk, crucial machine protection challenges for 2011 and beyond are discussed. Especially, UFOs as potential show-stoppers are addressed. UFOs or ''Unidentified Falling Objects'' were first observed in July 2010 and are since then a major source of emergency beam dumps. They are prospectively micrometer sized dust particles that lead to fast beam losses when they interact with the beam. The state of knowledge and mitigation strategies are presented.

  4. Stirling machine operating experience

    Energy Technology Data Exchange (ETDEWEB)

    Ross, B. [Stirling Technology Co., Richland, WA (United States); Dudenhoefer, J.E. [Lewis Research Center, Cleveland, OH (United States)

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  5. Perpetual Motion Machine

    Directory of Open Access Journals (Sweden)

    D. Tsaousis

    2008-01-01

    Full Text Available Ever since the first century A.D. there have been relative descriptions of known devices as well as manufactures for the creation of perpetual motion machines. Although physics has led, with two thermodynamic laws, to the opinion that a perpetual motion machine is impossible to be manufactured, inventors of every age and educational level appear to claim that they have invented something «entirely new» or they have improved somebody else’s invention, which «will function henceforth perpetually»! However the fact of the failure in manufacturing a perpetual motion machine till now, it does not mean that countless historical elements for these fictional machines become indifferent. The discussion on every version of a perpetual motion machine on the one hand gives the chance to comprehend the inventor’s of each period level of knowledge and his way of thinking, and on the other hand, to locate the points where this «perpetual motion machine» clashes with the laws of nature and that’s why it is impossible to have been manufactured or have functioned. The presentation of a new «perpetual motion machine» has excited our interest to locate its weak points. According to the designer of it the machine functions with the work produced by the buoyant force

  6. Machine Intelligence and Explication

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    1987-01-01

    This report is an MA ("doctoraal") thesis submitted to the department of philosophy, university of Amsterdam. It attempts to answer the question whether machines can think by conceptual analysis. Ideally. a conceptual analysis should give plausible explications of the concepts of "machine" and "inte

  7. Microsoft Azure machine learning

    CERN Document Server

    Mund, Sumit

    2015-01-01

    The book is intended for those who want to learn how to use Azure Machine Learning. Perhaps you already know a bit about Machine Learning, but have never used ML Studio in Azure; or perhaps you are an absolute newbie. In either case, this book will get you up-and-running quickly.

  8. Reactive Turing machines

    NARCIS (Netherlands)

    Baeten, J.C.M.; Luttik, B.; Tilburg, P.J.A. van

    2013-01-01

    We propose reactive Turing machines (RTMs), extending classical Turing machines with a process-theoretical notion of interaction, and use it to define a notion of executable transition system. We show that every computable transition system with a bounded branching degree is simulated modulo diverge

  9. Machine Intelligence and Explication

    NARCIS (Netherlands)

    Wieringa, Roel

    1987-01-01

    This report is an MA ("doctoraal") thesis submitted to the department of philosophy, university of Amsterdam. It attempts to answer the question whether machines can think by conceptual analysis. Ideally. a conceptual analysis should give plausible explications of the concepts of "machine" and "inte

  10. Coordinate measuring machines

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with three exercises of 2 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercises concern three aspects of coordinate measuring: 1) Measuring and verification of tolerances on coordinate measuring machines, 2) Traceability...

  11. Simple Machine Junk Cars

    Science.gov (United States)

    Herald, Christine

    2010-01-01

    During the month of May, the author's eighth-grade physical science students study the six simple machines through hands-on activities, reading assignments, videos, and notes. At the end of the month, they can easily identify the six types of simple machine: inclined plane, wheel and axle, pulley, screw, wedge, and lever. To conclude this unit,…

  12. Human Machine Learning Symbiosis

    Science.gov (United States)

    Walsh, Kenneth R.; Hoque, Md Tamjidul; Williams, Kim H.

    2017-01-01

    Human Machine Learning Symbiosis is a cooperative system where both the human learner and the machine learner learn from each other to create an effective and efficient learning environment adapted to the needs of the human learner. Such a system can be used in online learning modules so that the modules adapt to each learner's learning state both…

  13. Machine learning with R

    CERN Document Server

    Lantz, Brett

    2015-01-01

    Perhaps you already know a bit about machine learning but have never used R, or perhaps you know a little R but are new to machine learning. In either case, this book will get you up and running quickly. It would be helpful to have a bit of familiarity with basic programming concepts, but no prior experience is required.

  14. Marketing Practices of Vapor Store Owners

    Science.gov (United States)

    Gowin, Mary; Wann, Taylor Franklin

    2015-01-01

    Objectives. We examined the marketing strategies for local vapor stores in a large metropolitan area in Oklahoma. Methods. Vapor store owners or managers (n = 33) participated in individual interviews regarding marketing practices in 2014. We asked owners about their marketing strategies and the groups they targeted. We transcribed the interviews and analyzed them for themes. Results. Store owners used a variety of marketing strategies to bring new customers to their stores and keep current customers coming back. These marketing strategies showed many parallels to tobacco industry strategies. Most owners engaged in some form of traditional marketing practices (e.g., print media), but only a few used radio or television advertising because of budget constraints. Owners used social media and other forms of electronic communication, pricing discounts and specials, and loyalty programs. Owners also had booths at local events, sponsored community events, and hosted them in their stores. Owners attempted to target different groups of users, such as college students and long-term smokers. Conclusions. Local vapor store marketing practices closely resemble current and former tobacco industry marketing strategies. Surveillance of marketing practices should include local and Web-based strategies. PMID:25880960

  15. Marketing practices of vapor store owners.

    Science.gov (United States)

    Cheney, Marshall; Gowin, Mary; Wann, Taylor Franklin

    2015-06-01

    We examined the marketing strategies for local vapor stores in a large metropolitan area in Oklahoma. Vapor store owners or managers (n = 33) participated in individual interviews regarding marketing practices in 2014. We asked owners about their marketing strategies and the groups they targeted. We transcribed the interviews and analyzed them for themes. Store owners used a variety of marketing strategies to bring new customers to their stores and keep current customers coming back. These marketing strategies showed many parallels to tobacco industry strategies. Most owners engaged in some form of traditional marketing practices (e.g., print media), but only a few used radio or television advertising because of budget constraints. Owners used social media and other forms of electronic communication, pricing discounts and specials, and loyalty programs. Owners also had booths at local events, sponsored community events, and hosted them in their stores. Owners attempted to target different groups of users, such as college students and long-term smokers. Local vapor store marketing practices closely resemble current and former tobacco industry marketing strategies. Surveillance of marketing practices should include local and Web-based strategies.

  16. 15 CFR 700.31 - Metalworking machines.

    Science.gov (United States)

    2010-01-01

    ... Drilling and tapping machines Electrical discharge, ultrasonic and chemical erosion machines Forging..., power driven Machining centers and way-type machines Manual presses Mechanical presses, power...

  17. LHC Report: machine development

    CERN Multimedia

    Rogelio Tomás García for the LHC team

    2015-01-01

    Machine development weeks are carefully planned in the LHC operation schedule to optimise and further study the performance of the machine. The first machine development session of Run 2 ended on Saturday, 25 July. Despite various hiccoughs, it allowed the operators to make great strides towards improving the long-term performance of the LHC.   The main goals of this first machine development (MD) week were to determine the minimum beam-spot size at the interaction points given existing optics and collimation constraints; to test new beam instrumentation; to evaluate the effectiveness of performing part of the beam-squeezing process during the energy ramp; and to explore the limits on the number of protons per bunch arising from the electromagnetic interactions with the accelerator environment and the other beam. Unfortunately, a series of events reduced the machine availability for studies to about 50%. The most critical issue was the recurrent trip of a sextupolar corrector circuit –...

  18. Micro-machining.

    Science.gov (United States)

    Brinksmeier, Ekkard; Preuss, Werner

    2012-08-28

    Manipulating bulk material at the atomic level is considered to be the domain of physics, chemistry and nanotechnology. However, precision engineering, especially micro-machining, has become a powerful tool for controlling the surface properties and sub-surface integrity of the optical, electronic and mechanical functional parts in a regime where continuum mechanics is left behind and the quantum nature of matter comes into play. The surprising subtlety of micro-machining results from the extraordinary precision of tools, machines and controls expanding into the nanometre range-a hundred times more precise than the wavelength of light. In this paper, we will outline the development of precision engineering, highlight modern achievements of ultra-precision machining and discuss the necessity of a deeper physical understanding of micro-machining.

  19. Introduction to machine learning.

    Science.gov (United States)

    Baştanlar, Yalin; Ozuysal, Mustafa

    2014-01-01

    The machine learning field, which can be briefly defined as enabling computers make successful predictions using past experiences, has exhibited an impressive development recently with the help of the rapid increase in the storage capacity and processing power of computers. Together with many other disciplines, machine learning methods have been widely employed in bioinformatics. The difficulties and cost of biological analyses have led to the development of sophisticated machine learning approaches for this application area. In this chapter, we first review the fundamental concepts of machine learning such as feature assessment, unsupervised versus supervised learning and types of classification. Then, we point out the main issues of designing machine learning experiments and their performance evaluation. Finally, we introduce some supervised learning methods.

  20. Competitive foods and beverages available for purchase in secondary schools--selected sites, United States, 2006.

    Science.gov (United States)

    2008-08-29

    Schools are in a unique position to help improve youth dietary behaviors and prevent and reduce obesity. In most schools, foods and beverages are made available to students through the U.S. Department of Agriculture (USDA) school meal programs and the sale of competitive foods, which are any foods and beverages sold at a school separately from the USDA school meal programs. Foods and beverages sold through the USDA school meal programs must meet federal nutrition requirements. Competitive foods are not subject to any federal nutrition standards unless they are sold inside the food service area during mealtimes. A 2007 Institute of Medicine (IOM) report concluded that schools should limit the availability of less nutritious competitive foods or include more nutritious foods and beverages if they make competitive foods available. To identify the types of competitive foods and beverages available for purchase from vending machines or at school stores, canteens, or snack bars, CDC analyzed data from the 2006 School Health Profiles for public secondary schools in 36 states and 12 large urban school districts. CDC also compared 2004 and 2006 data among 24 states and nine large urban school districts. This report summarizes the results of these analyses, which indicated that, from 2004 to 2006, the median percentage of secondary schools across states allowing students to purchase chocolate candy and salty snacks that are not low in fat decreased; however, in 2006, secondary schools still offered less nutritious foods and beverages that compete with school meals. School and public health officials should work together with families to provide foods and beverages at school that follow the IOM recommendations.

  1. Study on full automatic arc welding machine for spherical tank

    Institute of Scientific and Technical Information of China (English)

    蒋力培; 张甲英; 俞建荣

    2002-01-01

    A full automatic welding machine for spherical tanks' all position multi-layer welds has been developed. This machine is mainly composed of a two-dimension seam tracking system based on microcomputer's memory and a welding tractor as well as rail. The main features of the machine are: while welding the first layer of a seam, its microcomputer system can analyze and store the tracing information from a two-dimension sensor, and control the welding head device to realize two-dimension real time tracing; while welding the second layer up to the top layer of the seam, it can realize two-dimension tracing based on the memorial data, automatically determine the layer number and continually sway the welding head. The welding test shows that the machine has good tracing and welding behavior, and is suitable for spherical tank's all position multi-layer welds.

  2. Reliability Approach for Machine Protection Design in Particle Accelerators

    CERN Document Server

    Apollonio, A; Mikulec, B; Puccio, B; Sanchez Alvarez, J L; Schmidt, R; Wagner, S

    2013-01-01

    Particle accelerators require Machine Protection Systems (MPS) to prevent beam-induced damage of equipment in case of failures. This becomes increasingly important for proton colliders with large energy stored in the beam such as LHC, for high power accelerators with a beam power of up to 10 MW, such as the European Spallation Source (ESS), and for linear colliders with high beam power and very small beam size. The reliability of Machine Protection Systems is crucial for safe machine operation; all possible sources of risk need to be taken into account in the early design stage. This paper presents a systematic approach to classify failures and to assess the associated risk, and discusses the impact of such considerations on the design of Machine Protection Systems. The application of this approach will be illustrated using the new design of the MPS for LINAC4, a linear accelerator under construction at CERN.

  3. State machine analysis of sensor data from dynamic processes

    Energy Technology Data Exchange (ETDEWEB)

    Cook, William R.; Brabson, John M.; Deland, Sharon M.

    2003-12-23

    A state machine model analyzes sensor data from dynamic processes at a facility to identify the actual processes that were performed at the facility during a period of interest for the purpose of remote facility inspection. An inspector can further input the expected operations into the state machine model and compare the expected, or declared, processes to the actual processes to identify undeclared processes at the facility. The state machine analysis enables the generation of knowledge about the state of the facility at all levels, from location of physical objects to complex operational concepts. Therefore, the state machine method and apparatus may benefit any agency or business with sensored facilities that stores or manipulates expensive, dangerous, or controlled materials or information.

  4. Iron stores assessment in alcoholic liver disease.

    Science.gov (United States)

    Costa Matos, Luís; Batista, Paulo; Monteiro, Nuno; Ribeiro, João; Cipriano, Maria A; Henriques, Pedro; Girão, Fernando; Carvalho, Armando

    2013-06-01

    The relation between alcoholic liver disease (ALD) and iron overload is well known. Liver biopsy is the gold standard for assessing iron stores. MRI is also validated for liver iron concentration (LIC) assessment. We aimed to assess the effect of active drinking in liver iron stores and the practicability of measuring LIC by MRI in ALD patients. We measured LIC by MRI in 58 ALD patients. We divided patients into two groups - with and without active alcoholism - and we compared several variables between them. We evaluated MRI-LIC, liver iron stores grade, ferritin and necroinflammatory activity grade for significant correlations. Significant necroinflammation (40.0% vs. 4.3%), LIC (40.1 vs. 24.3 µmol/g), and ferritin (1259.7 vs. 568.7 pmol/L) were significantly higher in drinkers. LIC values had a strong association with iron stores grade (r s = 0.706). Ferritin correlated with LIC (r s = 0.615), iron stores grade (r s = 0.546), and necroinflammation (r s = 0.313). The odds ratio for elevated serum ferritin when actively drinking was 7.32. Active alcoholism is associated with increased ALD activity. It is also the key factor in iron overload. Scheuers' semiquantitative score with Perls' staining gives a fairly accurate picture of liver iron overload. Serum ferritin also shows a good correlation with LIC values and biopsy iron stores grade. As most patients present only with mild iron overload, serum ferritin measurement and semiquantitative evaluation of iron stores are adequate, considering MRI high cost. However, if MRI is required to evaluate liver structure, LIC assessment could be performed without added cost.

  5. Senior's lifestyle and their store choice

    Directory of Open Access Journals (Sweden)

    Lesakova Dagmar

    2014-01-01

    Full Text Available To attract and retain customers, an understanding of their motives and reasons for selecting particular food and grocery store is needed. This is of particular importance in the growing segment of seniors. The size of the senior's market demands a better understanding of the older consumer. The aim of our study is to identify psychographic characteristics of the elderly consumer, and to indicate the lifestyle groups and the relationship between these groups and retail store attributes. Differences in the motives for patronizing specific food stores are analyzed for lifestyle groups. We use the lifestyle as a segmentation variable in the diverse population of seniors for the reason, that the lifestyle of the elderly provides more valuable information than chronological age alone. This information can be used by retailers to improve marketing strategies in order to appeal to a target group of senior shoppers. Empirical research is based on a self-administrated questionnaire aimed on the identification of the lifestyle characteristics and retail store attributes of the consumers in 65+ age, used for the choice of food purchasing retail stores. Lifestyles characteristics were measured by the respondents activities, interests and opinions (AIO. The results of the research indicate that there are differences among the lifestyle groups with significant differences in attitudes towards quality of products or internal store environment. Our research demonstrates the value of psychographic information over age alone regarding the patronage factors in store selection. Our study is a part of the research project VEGA 1/0612/12 'Determinants of the size, structure and tendences in the individual consumption of seniors'.

  6. Strategic Marketing Plan For Wedding Store : Case: Golden Crown Wedding Store, China

    OpenAIRE

    Wu, Fan

    2013-01-01

    ABSTRACT Wu, Fan 2012. Strategic Marketing Plan for Golden Crown Wedding Store. Case: Golden Crown Wedding Store, China. Bachelor’s Thesis. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 39. Appendices 1- 2. The objective of this thesis is to build a strategic marketing plan for the Golden Crown Wedding Store. The strategic marketing plan and the analysis of the situation of the market are the main part of the thesis. This thesis will help the case company to ...

  7. Food and beverage purchases in corner stores, gas-marts, pharmacies and dollar stores.

    Science.gov (United States)

    Caspi, Caitlin E; Lenk, Kathleen; Pelletier, Jennifer E; Barnes, Timothy L; Harnack, Lisa; Erickson, Darin J; Laska, Melissa N

    2017-10-01

    Little is known about customer purchases of foods and beverages from small and non-traditional food retailers (i.e. corner stores, gas-marts, dollar stores and pharmacies). The present study aimed to: (i) describe customer characteristics, shopping frequency and reasons for shopping at small and non-traditional food retailers; and (ii) describe food/beverage purchases and their nutritional quality, including differences across store type. Data were collected through customer intercept interviews. Nutritional quality of food/beverage purchases was analysed; a Healthy Eating Index-2010 (HEI-2010) score for purchases was created by aggregating participant purchases at each store. Small and non-traditional food stores that were not WIC-authorized in Minneapolis and St. Paul, MN, USA. Customers (n 661) from 105 food retailers. Among participants, 29 % shopped at the store at least once daily; an additional 44 % shopped there at least once weekly. Most participants (74 %) cited convenient location as the primary draw to the store. Customers purchased a median of 2262 kJ (540 kcal), which varied by store type (P=0·04). The amount of added sugar far surpassed national dietary recommendations. At dollar stores, participants purchased a median of 5302 kJ (1266 kcal) for a median value of $US 2·89. Sugar-sweetened beverages were the most common purchase. The mean HEI-2010 score across all stores was 36·4. Small and non-traditional food stores contribute to the urban food environment. Given the poor nutritional quality of purchases, findings support the need for interventions that address customer decision making in these stores.

  8. Machine Learning and Radiology

    Science.gov (United States)

    Wang, Shijun; Summers, Ronald M.

    2012-01-01

    In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. PMID:22465077

  9. The basic anaesthesia machine.

    Science.gov (United States)

    Gurudatt, Cl

    2013-09-01

    After WTG Morton's first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey's machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia.

  10. The basic anaesthesia machine

    Directory of Open Access Journals (Sweden)

    C L Gurudatt

    2013-01-01

    Full Text Available After WTG Morton′s first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey′s machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia.

  11. Consumers' quality perception of national branded, national store branded, and imported store branded beef

    DEFF Research Database (Denmark)

    Banovic, Marija; Grunert, Klaus G.; Barreira, Maria Madalena

    2010-01-01

    This study investigated the differences in the consumers' quality perception of national branded, national store branded, and imported store branded beef. Partial Least Squares analysis is used for modelling the quality perception process. Results show that consumers perceived national branded...... Carnalentejana beef, as better on all quality cues and quality aspects than the other two store branded beefs. Preference for Carnalentejana beef stayed highly consistent even after the blind test, where consumers differentiated this beef from the other two beef brands on all sensory dimensions: taste......, tenderness, and juiciness, and chose it as the preferred one. Consumers utilized more perceived intrinsic cues to infer expected eating quality of store branded beefs....

  12. SOC and now also SIC: store-operated and store-inhibited channels.

    Science.gov (United States)

    Moreno, Claudia; Vaca, Luis

    2011-10-01

    There is a specialized form of calcium influx that involves a close communication between endoplasmic reticulum and the channels at the plasma membrane. In one side store depletion activates channels known as store-operated channels (SOC), which are responsible of the well-studied store-operated calcium entry (SOCE). SOC comprises two different types of channels. Orai, which is exclusively activated by store depletion being the channel responsible of the calcium release-activated calcium current, and transient receptor potential canonical channel, which in contrast, is activated by store depletion only under specific conditions and carries nonselective cationic currents. On the other hand, it has been recently shown that store depletion also inhibits calcium channels. The first member identified, of what we named as store-inhibited channels (SIC), is the L-type voltage-gated calcium channel. Stores control both SOC and SIC by means of the multifunctional protein STIM1. The identification of SOC and SIC opens a new scenario for the role of store depletion in the modulation of different calcium entry pathways, which may satisfy different cellular processes.

  13. Part Machinability Evaluation System

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In the early design period, estimation of the part or the whole product machinability is useful to consider the function and process request of the product at the same time so as to globally optimize the design decision. This paper presents a part machinability evaluation system, discusses the general restrictions of part machinability, and realizes the inspection of these restrictions with the relation between tool scan space and part model. During the system development, the expansibility and understandability were considered, and an independent restriction algorithm library and a general function library were set up. Additionally, the system has an interpreter and a knowledge manager.

  14. Fundamentals of machine design

    CERN Document Server

    Karaszewski, Waldemar

    2011-01-01

    A forum of researchers, educators and engineers involved in various aspects of Machine Design provided the inspiration for this collection of peer-reviewed papers. The resultant dissemination of the latest research results, and the exchange of views concerning the future research directions to be taken in this field will make the work of immense value to all those having an interest in the topics covered. The book reflects the cooperative efforts made in seeking out the best strategies for effecting improvements in the quality and the reliability of machines and machine parts and for extending

  15. Machine Tool Software

    Science.gov (United States)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  16. Analysis of synchronous machines

    CERN Document Server

    Lipo, TA

    2012-01-01

    Analysis of Synchronous Machines, Second Edition is a thoroughly modern treatment of an old subject. Courses generally teach about synchronous machines by introducing the steady-state per phase equivalent circuit without a clear, thorough presentation of the source of this circuit representation, which is a crucial aspect. Taking a different approach, this book provides a deeper understanding of complex electromechanical drives. Focusing on the terminal rather than on the internal characteristics of machines, the book begins with the general concept of winding functions, describing the placeme

  17. Database machine performance

    Energy Technology Data Exchange (ETDEWEB)

    Cesarini, F.; Salza, S.

    1987-01-01

    This book is devoted to the important problem of database machine performance evaluation. The book presents several methodological proposals and case studies, that have been developed within an international project supported by the European Economic Community on Database Machine Evaluation Techniques and Tools in the Context of the Real Time Processing. The book gives an overall view of the modeling methodologies and the evaluation strategies that can be adopted to analyze the performance of the database machine. Moreover, it includes interesting case studies and an extensive bibliography.

  18. Virtual Machine Introspection

    Directory of Open Access Journals (Sweden)

    S C Rachana

    2014-06-01

    Full Text Available Cloud computing is an Internet-based computing solution which provides the resources in an effective manner. A very serious issue in cloud computing is security which is a major obstacle for the adoption of cloud. The most important threats of cloud computing are Multitenancy, Availability, Loss of control, Loss of Data, outside attacks, DOS attacks, malicious insiders, etc. Among many security issues in cloud, the Virtual Machine Security is one of the very serious issues. Thus, monitoring of virtual machine is essential. The paper proposes a Virtual Network Introspection [VMI] System to secure the Virtual machines from Distributed Denial of Service [DDOS] and Zombie attacks.

  19. Virtual Machine Introspection

    Directory of Open Access Journals (Sweden)

    S C Rachana

    2015-11-01

    Full Text Available Cloud computing is an Internet-based computing solution which provides the resources in an effective manner. A very serious issue in cloud computing is security which is a major obstacle for the adoption of cloud. The most important threats of cloud computing are Multitenancy, Availability, Loss of control, Loss of Data, outside attacks, DOS attacks, malicious insiders, etc. Among many security issues in cloud, the Virtual Machine Security is one of the very serious issues. Thus, monitoring of virtual machine is essential. The paper proposes a Virtual Network Introspection [VMI] System to secure the Virtual machines from Distributed Denial of Service [DDOS] and Zombie attacks.

  20. Machine Learning for Hackers

    CERN Document Server

    Conway, Drew

    2012-01-01

    If you're an experienced programmer interested in crunching data, this book will get you started with machine learning-a toolkit of algorithms that enables computers to train themselves to automate useful tasks. Authors Drew Conway and John Myles White help you understand machine learning and statistics tools through a series of hands-on case studies, instead of a traditional math-heavy presentation. Each chapter focuses on a specific problem in machine learning, such as classification, prediction, optimization, and recommendation. Using the R programming language, you'll learn how to analyz

  1. Controlled English to facilitate human/machine analytical processing

    Science.gov (United States)

    Braines, Dave; Mott, David; Laws, Simon; de Mel, Geeth; Pham, Tien

    2013-06-01

    Controlled English is a human-readable information representation format that is implemented using a restricted subset of the English language, but which is unambiguous and directly accessible by simple machine processes. We have been researching the capabilities of CE in a number of contexts, and exploring the degree to which a flexible and more human-friendly information representation format could aid the intelligence analyst in a multi-agent collaborative operational environment; especially in cases where the agents are a mixture of other human users and machine processes aimed at assisting the human users. CE itself is built upon a formal logic basis, but allows users to easily specify models for a domain of interest in a human-friendly language. In our research we have been developing an experimental component known as the "CE Store" in which CE information can be quickly and flexibly processed and shared between human and machine agents. The CE Store environment contains a number of specialized machine agents for common processing tasks and also supports execution of logical inference rules that can be defined in the same CE language. This paper outlines the basic architecture of this approach, discusses some of the example machine agents that have been developed, and provides some typical examples of the CE language and the way in which it has been used to support complex analytical tasks on synthetic data sources. We highlight the fusion of human and machine processing supported through the use of the CE language and CE Store environment, and show this environment with examples of highly dynamic extensions to the model(s) and integration between different user-defined models in a collaborative setting.

  2. Machine Learning for Computer Vision

    CERN Document Server

    Battiato, Sebastiano; Farinella, Giovanni

    2013-01-01

    Computer vision is the science and technology of making machines that see. It is concerned with the theory, design and implementation of algorithms that can automatically process visual data to recognize objects, track and recover their shape and spatial layout. The International Computer Vision Summer School - ICVSS was established in 2007 to provide both an objective and clear overview and an in-depth analysis of the state-of-the-art research in Computer Vision. The courses are delivered by world renowned experts in the field, from both academia and industry, and cover both theoretical and practical aspects of real Computer Vision problems. The school is organized every year by University of Cambridge (Computer Vision and Robotics Group) and University of Catania (Image Processing Lab). Different topics are covered each year. A summary of the past Computer Vision Summer Schools can be found at: http://www.dmi.unict.it/icvss This edited volume contains a selection of articles covering some of the talks and t...

  3. MLBCD: a machine learning tool for big clinical data.

    Science.gov (United States)

    Luo, Gang

    2015-01-01

    Predictive modeling is fundamental for extracting value from large clinical data sets, or "big clinical data," advancing clinical research, and improving healthcare. Machine learning is a powerful approach to predictive modeling. Two factors make machine learning challenging for healthcare researchers. First, before training a machine learning model, the values of one or more model parameters called hyper-parameters must typically be specified. Due to their inexperience with machine learning, it is hard for healthcare researchers to choose an appropriate algorithm and hyper-parameter values. Second, many clinical data are stored in a special format. These data must be iteratively transformed into the relational table format before conducting predictive modeling. This transformation is time-consuming and requires computing expertise. This paper presents our vision for and design of MLBCD (Machine Learning for Big Clinical Data), a new software system aiming to address these challenges and facilitate building machine learning predictive models using big clinical data. The paper describes MLBCD's design in detail. By making machine learning accessible to healthcare researchers, MLBCD will open the use of big clinical data and increase the ability to foster biomedical discovery and improve care.

  4. Some relations between quantum Turing machines and Turing machines

    CERN Document Server

    Sicard, A; Sicard, Andrés; Vélez, Mario

    1999-01-01

    For quantum Turing machines we present three elements: Its components, its time evolution operator and its local transition function. The components are related with deterministic Turing machines, the time evolution operator is related with reversible Turing machines and the local transition function is related with probabilistic and reversible Turing machines.

  5. Machining of hard-to-machine materials

    OpenAIRE

    2016-01-01

    Bakalářská práce se zabývá studiem obrábění těžkoobrobitelných materiálů. V první části jsou rozděleny těžkoobrobitelné materiály a následuje jejich analýza. V další části se práce zaměřuje na problematiku obrobitelnosti jednotlivých slitin. Závěrečná část práce je věnovaná experimentu, jeho statistickému zpracování a nakonec následnému vyhodnocení. This bachelor thesis studies the machining of hard-to-machine materials. The first part of the thesis considers hard-to-machine materials and ...

  6. Machine (bulk) harvest

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a summary of machine harvesting activities on Neal Smith National Wildlife Refuge between 1991 and 2008. Information is provided for each year about...

  7. Machine Vision Handbook

    CERN Document Server

    2012-01-01

    The automation of visual inspection is becoming more and more important in modern industry as a consistent, reliable means of judging the quality of raw materials and manufactured goods . The Machine Vision Handbook  equips the reader with the practical details required to engineer integrated mechanical-optical-electronic-software systems. Machine vision is first set in the context of basic information on light, natural vision, colour sensing and optics. The physical apparatus required for mechanized image capture – lenses, cameras, scanners and light sources – are discussed followed by detailed treatment of various image-processing methods including an introduction to the QT image processing system. QT is unique to this book, and provides an example of a practical machine vision system along with extensive libraries of useful commands, functions and images which can be implemented by the reader. The main text of the book is completed by studies of a wide variety of applications of machine vision in insp...

  8. At the Core of the Apple Store: Images of Next Generation Learning

    Science.gov (United States)

    Washor, Elliot; Mojkowski, Charles; Newsom, Loran

    2009-01-01

    The physical, psychological, cultural, social, and organizational elements of a learning environment are as important as the learning opportunities themselves. The Apple Store blends retail and school into a new type of learning environment that lets the customer learn anything, at any time, at any level, from experts, expert practitioners, and…

  9. All Together Now: Social Bookmarking Offers a New Way to Store and Share Web Sites

    Science.gov (United States)

    DesRoches, Donna

    2007-01-01

    Social bookmarking allows multiple users to save their favorite sites, articles, and even podcasts on the Web--instead of inside one's browser--making them accessible from home, school, the library, or anywhere with Internet access. It's quickly becoming a popular way for teachers and students to store, classify, share, and search links, all of…

  10. Lightweight Tanks for Storing Liquefied Natural Gas

    Science.gov (United States)

    DeLay, Tom

    2008-01-01

    Single-walled, jacketed aluminum tanks have been conceived for storing liquefied natural gas (LNG) in LNG-fueled motor vehicles. Heretofore, doublewall steel tanks with vacuum between the inner and outer walls have been used for storing LNG. In comparison with the vacuum- insulated steel tanks, the jacketed aluminum tanks weigh less and can be manufactured at lower cost. Costs of using the jacketed aluminum tanks are further reduced in that there is no need for the vacuum pumps heretofore needed to maintain vacuum in the vacuum-insulated tanks.

  11. Understanding Consumers' In-store Visual Perception

    DEFF Research Database (Denmark)

    Clement, Jesper; Kristensen, Tore; Grønhaug, Kjell

    2013-01-01

    examine the relationship between abundant in-store stimuli and limited human perceptual capacity. Specifically, we test the influence of package design features on visual attention. Data was collected through two eye-tracking experiments, one in a grocery store using wireless eye-tracking equipment......, and another in a lab setting. Findings show that consumers have fragmented visual attention during grocery shopping, and that their visual attention is simultaneously influenced and disrupted by the shelf display. Physical design features such as shape and contrast dominate the initial phase of searching...

  12. Spin flipping a stored polarized proton beam

    Science.gov (United States)

    Caussyn, D. D.; Derbenev, Ya. S.; Ellison, T. J.; Lee, S. Y.; Rinckel, T.; Schwandt, P.; Sperisen, F.; Stephenson, E. J.; von Przewoski, B.; Blinov, B. B.; Chu, C. M.; Courant, E. D.; Crandell, D. A.; Kaufman, W. A.; Krisch, A. D.; Nurushev, T. S.; Phelps, R. A.; Ratner, L. G.; Wong, V. K.; Ohmori, C.

    1994-11-01

    We recently studied the spin flipping of a vertically polarized, stored 139-MeV proton beam. To flip the spin, we induced an rf depolarizing resonance by sweeping our rf solenoid magnet's frequency through the resonance frequency. With multiple spin flips, we found a polarization loss of 0.0000+/-0.0005 per spin flip under the best conditions; this loss increased significantly for small changes in the conditions. Minimizing the depolarization during each spin flip is especially important because frequent spin flipping could significantly reduce the systematic errors in stored polarized-beam experiments.

  13. Tests of Machine Intelligence

    CERN Document Server

    Legg, Shane

    2007-01-01

    Although the definition and measurement of intelligence is clearly of fundamental importance to the field of artificial intelligence, no general survey of definitions and tests of machine intelligence exists. Indeed few researchers are even aware of alternatives to the Turing test and its many derivatives. In this paper we fill this gap by providing a short survey of the many tests of machine intelligence that have been proposed.

  14. Metalworking and machining fluids

    Science.gov (United States)

    Erdemir, Ali; Sykora, Frank; Dorbeck, Mark

    2010-10-12

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  15. mlpy: Machine Learning Python

    CERN Document Server

    Albanese, Davide; Merler, Stefano; Riccadonna, Samantha; Jurman, Giuseppe; Furlanello, Cesare

    2012-01-01

    mlpy is a Python Open Source Machine Learning library built on top of NumPy/SciPy and the GNU Scientific Libraries. mlpy provides a wide range of state-of-the-art machine learning methods for supervised and unsupervised problems and it is aimed at finding a reasonable compromise among modularity, maintainability, reproducibility, usability and efficiency. mlpy is multiplatform, it works with Python 2 and 3 and it is distributed under GPL3 at the website http://mlpy.fbk.eu.

  16. Human-machine interactions

    Science.gov (United States)

    Forsythe, J. Chris; Xavier, Patrick G.; Abbott, Robert G.; Brannon, Nathan G.; Bernard, Michael L.; Speed, Ann E.

    2009-04-28

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  17. Machine Learning with Distances

    Science.gov (United States)

    2015-02-16

    and demonstrated their usefulness in experiments. 1 Introduction The goal of machine learning is to find useful knowledge behind data. Many machine...212, 172]. However, direct divergence approximators still suffer from the curse of dimensionality. A possible cure for this problem is to combine them...obtain the global optimal solution or even a good local solution without any prior knowledge . For this reason, we decided to introduce the unit-norm

  18. mlpy: Machine Learning Python

    OpenAIRE

    Albanese, Davide; Visintainer, Roberto; Merler, Stefano; Riccadonna, Samantha; Jurman, Giuseppe; Furlanello, Cesare

    2012-01-01

    mlpy is a Python Open Source Machine Learning library built on top of NumPy/SciPy and the GNU Scientific Libraries. mlpy provides a wide range of state-of-the-art machine learning methods for supervised and unsupervised problems and it is aimed at finding a reasonable compromise among modularity, maintainability, reproducibility, usability and efficiency. mlpy is multiplatform, it works with Python 2 and 3 and it is distributed under GPL3 at the website http://mlpy.fbk.eu.

  19. Influence of Retail Store Design on the Performance of Retail Store Managers

    Directory of Open Access Journals (Sweden)

    Irina Olimpia SUSANU

    2011-11-01

    Full Text Available The purpose of this study is to examine the influence of retail store design on the performance and job satisfaction of retail store managers. A structural equations model is tested with 200 managers of a large supermarket chain. Moderating effects of crowding and perceived control on design satisfaction are examined. Managerial implications for strategy and theoretical contributions are discussed.

  20. Beyond Promotion-Based Store Switching : Antecedents and Consequences of Systematic Multiple-Store Shopping

    NARCIS (Netherlands)

    Gijsbrechts, E.; Campo, K.; Nisol, P.

    2005-01-01

    In this paper, we demonstrate that single-purpose multiple store shopping is not only driven by opportunistic, promotion-based motivations, but may also be part of a longer term shopping planning process based on stable store characteristics.Starting from a utility-maximizing shopping behavior

  1. Beyond Promotion-Based Store Switching : Antecedents and Consequences of Systematic Multiple-Store Shopping

    NARCIS (Netherlands)

    Gijsbrechts, E.; Campo, K.; Nisol, P.

    2005-01-01

    In this paper, we demonstrate that single-purpose multiple store shopping is not only driven by opportunistic, promotion-based motivations, but may also be part of a longer term shopping planning process based on stable store characteristics.Starting from a utility-maximizing shopping behavior model

  2. How the Measurement of Store Choice Behaviour Moderates the Relationship between Distance and Store Choice Behaviour

    DEFF Research Database (Denmark)

    Hansen, Torben; Cumberland, Flemming; Solgaard, Hans Stubbe

    2013-01-01

    The influence of distance on consumer store choice behaviour has been considered in many studies. In that respect, frequency and budget share are frequently used methods of measurement to determine the consumer's store choice behavour. In this study, we propose that the significance of distance...

  3. How the Measurement of Store Choice Behaviour Moderates the Relationship between Distance and Store Choice Behaviour

    DEFF Research Database (Denmark)

    Hansen, Torben; Cumberland, Flemming; Solgaard, Hans Stubbe

    2013-01-01

    The influence of distance on consumer store choice behaviour has been considered in many studies. In that respect, frequency and budget share are frequently used methods of measurement to determine the consumer's store choice behavour. In this study, we propose that the significance of distance i...

  4. Beyond Promotion-Based Store Switching : Antecedents and Consequences of Systematic Multiple-Store Shopping

    NARCIS (Netherlands)

    Gijsbrechts, E.; Campo, K.; Nisol, P.

    2005-01-01

    In this paper, we demonstrate that single-purpose multiple store shopping is not only driven by opportunistic, promotion-based motivations, but may also be part of a longer term shopping planning process based on stable store characteristics.Starting from a utility-maximizing shopping behavior model

  5. The influence of store image on customer satisfaction: a case study of a shoe store

    Directory of Open Access Journals (Sweden)

    Tarsis Souza Silva

    2010-01-01

    Full Text Available Knowledge of customers' image of a store is an essential factor in the management of retail outlets. This article presents a case study of the effect of the image customers have of a shoe store on their satisfaction, based on a descriptive and quantitative survey, with the application of a structured questionnaire. We then employed factor analysis to obtain seven store image factors: assortment, convenience, reputation, price, atmosphere, layout and service. The results show that the factor that most affects customer satisfaction in the store studied is service, and that atmosphere and layout have no effect in this respect. The results provide a better understanding of the role store image plays in customer satisfaction and loyalty.

  6. EVALUATION OF MACHINE TOOL QUALITY

    Directory of Open Access Journals (Sweden)

    Ivan Kuric

    2011-12-01

    Full Text Available Paper deals with aspects of quality and accuracy of machine tools. As the accuracy of machine tools has key factor for product quality, it is important to know the methods for evaluation of quality and accuracy of machine tools. Several aspects of diagnostics of machine tools are described, such as aspects of reliability.

  7. An HTS machine laboratory prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2012-01-01

    This paper describes Superwind HTS machine laboratory setup which is a small scale HTS machine designed and build as a part of the efforts to identify and tackle some of the challenges the HTS machine design may face. One of the challenges of HTS machines is a Torque Transfer Element (TTE) which...

  8. Machining of fiber reinforced composites

    Science.gov (United States)

    Komanduri, Ranga; Zhang, Bi; Vissa, Chandra M.

    Factors involved in machining of fiber-reinforced composites are reviewed. Consideration is given to properties of composites reinforced with boron filaments, glass fibers, aramid fibers, carbon fibers, and silicon carbide fibers and to polymer (organic) matrix composites, metal matrix composites, and ceramic matrix composites, as well as to the processes used in conventional machining of boron-titanium composites and of composites reinforced by each of these fibers. Particular attention is given to the methods of nonconventional machining, such as laser machining, water jet cutting, electrical discharge machining, and ultrasonic assisted machining. Also discussed are safety precautions which must be taken during machining of fiber-containing composites.

  9. Entrance Effects in Solar Hot Water Stores

    DEFF Research Database (Denmark)

    Shah, Louise Jivan; Furbo, Simon

    2003-01-01

    A theoretical and experimental analysis of water jets entering a solar storage tank is performed. CFD calculations of three inlet designs with different inlet flow rates were carried out to illustrate the varying behaviour of the thermal conditions in a solar store. The results showed the impact...

  10. 19 CFR 122.47 - Stores list.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Stores list. 122.47 Section 122.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Entry and Entry Documents; Electronic Manifest Requirements for...

  11. Fuels and Lubricants. Selecting and Storing.

    Science.gov (United States)

    Parady, W. Harold; Colvin, Thomas S.

    The manual presents basic information for the person who plans to operate or service tractors, trucks, industrial engines, and automobiles. It tells how to select the proper fuels and lubricants and how to store them properly. Although there are no prerequisites to the study of the text, a general knowledge of engines and mobile-type vehicles is…

  12. The Changing Face of the College Store

    Science.gov (United States)

    Halligan, Tom

    2008-01-01

    Increased competition from Internet merchants, coupled with the swelling popularity of electronic books and skyrocketing textbook prices, is forcing the nation's college stores to get creative, find new ways to boost revenues, and drive sales of books and other merchandise to students and faculty. To make up for lost revenue as a result of…

  13. PERSONALITY INFLUENCES ON ONLINE STORES CUSTOMERS BEHAVIOR

    Directory of Open Access Journals (Sweden)

    Costinel DOBRE

    2015-02-01

    Full Text Available Online customer behaviors include a wide range of processes and activities related to sensory reactions, perceptions, attitude formation, preferences, decisions, satisfaction evaluation, and loyalty formation. Online customer behaviors are influenced by exogenous and endogenous factors. Exogenous factors include attributes associated with the online retailer and the consumer’s environmental influences. Endogenous factors include characteristics attributed to consumers. Of these, personality has major influences on customer behavior in the online stores. In this paper we highlight the influences of personality on important decision making variables linked to the customer’s online visiting, buying and post purchase process. Thus, we intend to point out the influences of personality on the criteria used in evaluating stores, on expectations customers form towards stores, on the perception of store performance and the assessment of satisfaction. This will involve carrying out a survey, and its administration will be performed on the Internet. The sample under research will comprise respondents who own an account on the social network Facebook, assuming these respondents have time and are more likely to have purchased online at least once. The results of this study are useful both for academic researchers and practitioners engaged in online marketing, online communication and web design.

  14. Depolarization of UCN stored in material traps

    CERN Document Server

    Serebrov, A; Lasakov, M; Rudnev, Y; Krasnoschekova, I A; Geltenbort, P; Butterworth, J; Bowles, T; Morris, C; Seestrom, S; Smith, D; Young, A R

    2000-01-01

    Depolarization of ultra-cold neutrons (UCN) stored in material traps was first observed. The probability of UCN spin flip per reflection depends on the trap material and varies from 7x10 sup - sup 6 (beryllium) to 10 sup - sup 4 (glass).

  15. The Changing Face of the College Store

    Science.gov (United States)

    Halligan, Tom

    2008-01-01

    Increased competition from Internet merchants, coupled with the swelling popularity of electronic books and skyrocketing textbook prices, is forcing the nation's college stores to get creative, find new ways to boost revenues, and drive sales of books and other merchandise to students and faculty. To make up for lost revenue as a result of…

  16. TO ALL USERS OF GAS FROM STORES

    CERN Multimedia

    SPL Division

    2002-01-01

    Users of gas from stores are requested to return empty gas containers (cylinders, etc.) as soon as possible after use. These containers belong to the supplier and are therefore subject to a hire charge. Gas users are invited to place the empty containers at the official delivery points, where they will be collected by the supplier. Thank you. SPL Division Logistics Group

  17. TO ALL USERS OF GAS FROM STORES

    CERN Multimedia

    SPL Division

    2002-01-01

    Users of gas from stores are requested to return empty gas containers (cylinders, etc.) as soon as possible after use. These containers belong to the supplier and are therefore subject to a hire charge. Gas users are invited to place the empty containers at the official delivery points, where they will be collected by the supplier. Thank you. SPL Division Logistics Group

  18. A modern approach to storing of 3D geometry of objects in machine engineering industry

    Science.gov (United States)

    Sokolova, E. A.; Aslanov, G. A.; Sokolov, A. A.

    2017-02-01

    3D graphics is a kind of computer graphics which has absorbed a lot from the vector and raster computer graphics. It is used in interior design projects, architectural projects, advertising, while creating educational computer programs, movies, visual images of parts and products in engineering, etc. 3D computer graphics allows one to create 3D scenes along with simulation of light conditions and setting up standpoints.

  19. Machining of Metal Matrix Composites

    CERN Document Server

    2012-01-01

    Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manu...

  20. The Strategic Management of Store Brand Perceived Quality

    Science.gov (United States)

    Yang, Defeng

    Store brand plays a vital role in the success of retailers. Perceived quality is one of important factors influencing consumers' store brand purchase intention. Store brand perceived quality is lower compared with objective quality or national brand. For this end, the purpose of this article is to examine how to manage store brand perceived quality in strategic level. This article firstly discusses how consumers evaluate product quality, and the theoretical background of the reason that store brand perceived quality is lower from the view of cue related theories. Then, consumers' store brand quality evaluation is explored. Finally, this article presents several strategic tactics to increase store brand perceived quality. These tactics include choosing store's name as store brand name, making large advertising investment, improving store brand product package, and strengthening the relationship with store brand product suppliers.

  1. Non-conventional electrical machines

    CERN Document Server

    Rezzoug, Abderrezak

    2013-01-01

    The developments of electrical machines are due to the convergence of material progress, improved calculation tools, and new feeding sources. Among the many recent machines, the authors have chosen, in this first book, to relate the progress in slow speed machines, high speed machines, and superconducting machines. The first part of the book is dedicated to materials and an overview of magnetism, mechanic, and heat transfer.

  2. A 128-Channel Extreme Learning Machine-Based Neural Decoder for Brain Machine Interfaces.

    Science.gov (United States)

    Chen, Yi; Yao, Enyi; Basu, Arindam

    2016-06-01

    Currently, state-of-the-art motor intention decoding algorithms in brain-machine interfaces are mostly implemented on a PC and consume significant amount of power. A machine learning coprocessor in 0.35- μm CMOS for the motor intention decoding in the brain-machine interfaces is presented in this paper. Using Extreme Learning Machine algorithm and low-power analog processing, it achieves an energy efficiency of 3.45 pJ/MAC at a classification rate of 50 Hz. The learning in second stage and corresponding digitally stored coefficients are used to increase robustness of the core analog processor. The chip is verified with neural data recorded in monkey finger movements experiment, achieving a decoding accuracy of 99.3% for movement type. The same coprocessor is also used to decode time of movement from asynchronous neural spikes. With time-delayed feature dimension enhancement, the classification accuracy can be increased by 5% with limited number of input channels. Further, a sparsity promoting training scheme enables reduction of number of programmable weights by ≈ 2X.

  3. Machinability evaluation of machinable ceramics with fuzzy theory

    Institute of Scientific and Technical Information of China (English)

    YU Ai-bing; ZHONG Li-jun; TAN Ye-fa

    2005-01-01

    The property parameters and machining output parameters were selected for machinability evaluation of machinable ceramics. Based on fuzzy evaluation theory, two-stage fuzzy evaluation approach was applied to consider these parameters. Two-stage fuzzy comprehensive evaluation model was proposed to evaluate machinability of machinable ceramic materials. Ce-ZrO2/CePO4 composites were fabricated and machined for evaluation of machinable ceramics. Material removal rates and specific normal grinding forces were measured. The parameters concerned with machinability were selected as alternative set. Five grades were chosen for the machinability evaluation of machnable ceramics. Machinability grades of machinable ceramics were determined through fuzzy operation. Ductile marks are observed on Ce-ZrO2/CePO4 machined surface. Five prepared Ce-ZrO2/CePO4 composites are classified as three machinability grades according to the fuzzy comprehensive evaluation results. The machinability grades of Ce-ZrO2/CePO4 composites are concerned with CePO4 content.

  4. Digital VLSI algorithms and architectures for support vector machines.

    Science.gov (United States)

    Anguita, D; Boni, A; Ridella, S

    2000-06-01

    In this paper, we propose some very simple algorithms and architectures for a digital VLSI implementation of Support Vector Machines. We discuss the main aspects concerning the realization of the learning phase of SVMs, with special attention on the effects of fixed-point math for computing and storing the parameters of the network. Some experiments on two classification problems are described that show the efficiency of the proposed methods in reaching optimal solutions with reasonable hardware requirements.

  5. Countability and Number in Japanese-to-English Machine Translation

    CERN Document Server

    Bond, F; Ikehara, S; Bond, Francis; Ogura, Kentaro; Ikehara, Satoru

    1994-01-01

    This paper presents a heuristic method that uses information in the Japanese text along with knowledge of English countability and number stored in transfer dictionaries to determine the countability and number of English noun phrases. Incorporating this method into the machine translation system ALT-J/E, helped to raise the percentage of noun phrases generated with correct use of articles and number from 65% to 73%.

  6. Evaluating the use of in-store measures in retail food stores and restaurants in Brazil

    Directory of Open Access Journals (Sweden)

    Ana Clara Duran

    2015-01-01

    Full Text Available ABSTRACTOBJECTIVE To assess inter-rater reliability, test-retest reliability, and construct validity of retail food store, open-air food market, and restaurant observation tools adapted to the Brazilian urban context.METHODS This study is part of a cross-sectional observation survey conducted in 13 districts across the city of Sao Paulo, Brazil in 2010-2011. Food store and restaurant observational tools were developed based on previously available tools, and then tested it. They included measures on the availability, variety, quality, pricing, and promotion of fruits and vegetables and ultra-processed foods. We used Kappa statistics and intra-class correlation coefficients to assess inter-rater and test-retest reliabilities in samples of 142 restaurants, 97 retail food stores (including open-air food markets, and of 62 restaurants and 45 retail food stores (including open-air food markets, respectively. Construct validity as the tool’s abilities to discriminate based on store types and different income contexts were assessed in the entire sample: 305 retail food stores, 8 fruits and vegetable markets, and 472 restaurants.RESULTS Inter-rater and test-retest reliability were generally high, with most Kappa values greater than 0.70 (range 0.49-1.00. Both tools discriminated between store types and neighborhoods with different median income. Fruits and vegetables were more likely to be found in middle to higher-income neighborhoods, while soda, fruit-flavored drink mixes, cookies, and chips were cheaper and more likely to be found in lower-income neighborhoods.CONCLUSIONS The measures were reliable and able to reveal significant differences across store types and different contexts. Although some items may require revision, results suggest that the tools may be used to reliably measure the food stores and restaurant food environment in urban settings of middle-income countries. Such studies can help .inform health promotion interventions and

  7. MACHINE MOTION EQUATIONS

    Directory of Open Access Journals (Sweden)

    Florian Ion Tiberiu Petrescu

    2015-09-01

    Full Text Available This paper presents the dynamic, original, machine motion equations. The equation of motion of the machine that generates angular speed of the shaft (which varies with position and rotation speed is deduced by conservation kinetic energy of the machine. An additional variation of angular speed is added by multiplying by the coefficient dynamic D (generated by the forces out of mechanism and or by the forces generated by the elasticity of the system. Kinetic energy conservation shows angular speed variation (from the shaft with inertial masses, while the dynamic coefficient introduces the variation of w with forces acting in the mechanism. Deriving the first equation of motion of the machine one can obtain the second equation of motion dynamic. From the second equation of motion of the machine it determines the angular acceleration of the shaft. It shows the distribution of the forces on the mechanism to the internal combustion heat engines. Dynamic, the velocities can be distributed in the same way as forces. Practically, in the dynamic regimes, the velocities have the same timing as the forces. Calculations should be made for an engine with a single cylinder. Originally exemplification is done for a classic distribution mechanism, and then even the module B distribution mechanism of an Otto engine type.

  8. Analyse mobiler Applikationen zu HNO spezifischen Suchbegriffen im Google Play Store und iTunes Store.

    OpenAIRE

    Dakara, C; Hansen, S.; Wagenmann, M; Schipper, J; Werminghaus, P

    2015-01-01

    Einleitung: Mit zunehmender Verfügbarkeit von mobilen Applikationen für Smartphones eröffnen sich neue Wege zur Verbreitung medizinischer Inhalte. Daher untersuchten wir die gängigen App-Stores nach HNO-relevanten Begriffen um die mobilen Applikationen (mA) zu analysieren. Methoden: Im November 2014 wurden "Google Play Store" (GPS) und "iTunes Store" (iTS) auf HNO-relevante Suchbegriffe auf Deutsch durchsucht. Die mA wurden kategorisiert nach Thema, Bewertung, Anzahl der Bewertungen, Prei...

  9. Pricing of Staple Foods at Supermarkets versus Small Food Stores.

    Science.gov (United States)

    Caspi, Caitlin E; Pelletier, Jennifer E; Harnack, Lisa J; Erickson, Darin J; Lenk, Kathleen; Laska, Melissa N

    2017-08-15

    Prices affect food purchase decisions, particularly in lower-income communities, where access to a range of food retailers (including supermarkets) is limited. The aim of this study was to examine differences in staple food pricing between small urban food stores and the closest supermarkets, as well as whether pricing differentials varied based on proximity between small stores and larger retailers. In 2014, prices were measured for 15 staple foods during store visits in 140 smaller stores (corner stores, gas-marts, dollar stores, and pharmacies) in Minneapolis/St. Paul, MN and their closest supermarket. Mixed models controlling for store type were used to estimate the average price differential between: (a) smaller stores and supermarkets; (b) isolated smaller stores (>1 mile to closest supermarket) and non-isolated smaller stores; and (c) isolated smaller stores inside versus outside USDA-identified food deserts. On average, all items except white bread were 10-54% more expensive in smaller stores than in supermarkets (p stores compared with non-isolated stores for most items. Among isolated stores, there were no price differences inside versus outside food deserts. We conclude that smaller food stores have higher prices for most staple foods compared to their closest supermarket, regardless of proximity. More research is needed to examine staple food prices in different retail spaces.

  10. Dynamics of cyclic machines

    CERN Document Server

    Vulfson, Iosif

    2015-01-01

    This book focuses on modern methods of oscillation analysis in machines, including cyclic action mechanisms (linkages, cams, steppers, etc.). It presents schematization techniques and mathematical descriptions of oscillating systems, taking into account the variability of the parameters and nonlinearities, engineering evaluations of dynamic errors, and oscillation suppression methods. The majority of the book is devoted to the development of new methods of dynamic analysis and synthesis for cyclic machines that form regular oscillatory systems with multiple duplicate modules.  There are also sections examining aspects of general engineering interest (nonlinear dissipative forces, systems with non-stationary constraints, impacts and pseudo-impacts in clearances, etc.)  The examples in the book are based on the widely used results of theoretical and experimental studies as well as engineering calculations carried out in relation to machines used in the textile, light, polygraphic and other industries. Particu...

  11. Chatter and machine tools

    CERN Document Server

    Stone, Brian

    2014-01-01

    Focussing on occurrences of unstable vibrations, or Chatter, in machine tools, this book gives important insights into how to eliminate chatter with associated improvements in product quality, surface finish and tool wear. Covering a wide range of machining processes, including turning, drilling, milling and grinding, the author uses his research expertise and practical knowledge of vibration problems to provide solutions supported by experimental evidence of their effectiveness. In addition, this book contains links to supplementary animation programs that help readers to visualise the ideas detailed in the text. Advancing knowledge in chatter avoidance and suggesting areas for new innovations, Chatter and Machine Tools serves as a handbook for those desiring to achieve significant reductions in noise, longer tool and grinding wheel life and improved product finish.

  12. Machines and Metaphors

    Directory of Open Access Journals (Sweden)

    Ángel Martínez García-Posada

    2016-10-01

    Full Text Available The edition La ley del reloj. Arquitectura, máquinas y cultura moderna (Cátedra, Madrid, 2016 registers the useful paradox of the analogy between architecture and technique. Its author, the architect Eduardo Prieto, also a philosopher, professor and writer, acknowledges the obvious distance from machines to buildings, so great that it can only be solved using strange comparisons, since architecture does not move nor are the machines habitable, however throughout the book, from the origin of the metaphor of the machine, with clarity in his essay and enlightening erudition, he points out with certainty some concomitances of high interest, drawing throughout history a beautiful cartography of the fruitful encounter between organics and mechanics.

  13. Machine Learning Markets

    CERN Document Server

    Storkey, Amos

    2011-01-01

    Prediction markets show considerable promise for developing flexible mechanisms for machine learning. Here, machine learning markets for multivariate systems are defined, and a utility-based framework is established for their analysis. This differs from the usual approach of defining static betting functions. It is shown that such markets can implement model combination methods used in machine learning, such as product of expert and mixture of expert approaches as equilibrium pricing models, by varying agent utility functions. They can also implement models composed of local potentials, and message passing methods. Prediction markets also allow for more flexible combinations, by combining multiple different utility functions. Conversely, the market mechanisms implement inference in the relevant probabilistic models. This means that market mechanism can be utilized for implementing parallelized model building and inference for probabilistic modelling.

  14. Machine Learning for Security

    CERN Document Server

    CERN. Geneva

    2015-01-01

    Applied statistics, aka ‘Machine Learning’, offers a wealth of techniques for answering security questions. It’s a much hyped topic in the big data world, with many companies now providing machine learning as a service. This talk will demystify these techniques, explain the math, and demonstrate their application to security problems. The presentation will include how-to’s on classifying malware, looking into encrypted tunnels, and finding botnets in DNS data. About the speaker Josiah is a security researcher with HP TippingPoint DVLabs Research Group. He has over 15 years of professional software development experience. Josiah used to do AI, with work focused on graph theory, search, and deductive inference on large knowledge bases. As rules only get you so far, he moved from AI to using machine learning techniques identifying failure modes in email traffic. There followed digressions into clustered data storage and later integrated control systems. Current ...

  15. Advanced Analysis of Nontraditional Machining

    CERN Document Server

    Tsai, Hung-Yin

    2013-01-01

    Nontraditional machining utilizes thermal, chemical, electrical, mechanical and optical sources of energy to form and cut materials. Advanced Analysis of Nontraditional Machining explains in-depth how each of these advanced machining processes work, their machining system components, and process variables and industrial applications, thereby offering advanced knowledge and scientific insight. This book also documents the latest and frequently cited research results of a few key nonconventional machining processes for the most concerned topics in industrial applications, such as laser machining, electrical discharge machining, electropolishing of die and mold, and wafer processing for integrated circuit manufacturing. This book also: Fills the gap of the advanced knowledge of nonconventional machining between industry and research Documents latest and frequently cited research of key nonconventional machining processes for the most sought after topics in industrial applications Demonstrates advanced multidisci...

  16. Machining strategy choice: performance VIEWER

    CERN Document Server

    Tapie, Laurent; Anselmetti, Bernard

    2009-01-01

    Nowadays high speed machining (HSM) machine tool combines productivity and part quality. So mould and die maker invested in HSM. Die and mould features are more and more complex shaped. Thus, it is difficult to choose the best machining strategy according to part shape. Geometrical analysis of machining features is not sufficient to make an optimal choice. Some research show that security, technical, functional and economical constrains must be taken into account to elaborate a machining strategy. During complex shape machining, production system limits induce feed rate decreases, thus loss of productivity, in some part areas. In this paper we propose to analyse these areas by estimating tool path quality. First we perform experiments on HSM machine tool to determine trajectory impact on machine tool behaviour. Then, we extract critical criteria and establish models of performance loss. Our work is focused on machine tool kinematical performance and numerical controller unit calculation capacity. We implement...

  17. Storing Data Flow Monitoring in Hadoop

    CERN Document Server

    Georgiou, Anastasia

    2013-01-01

    The on-line data flow monitoring for the CMS data acquisition system produces a large amount of data. Only 5% of data is stored permanently in a relational database due to performance issues and the cost for using dedicated infrastructure (e.g. Oracle systems). In a commercial environment, companies and organizations need to find new innovative approaches to process such big volumes of data, known as “big data”. The Big Data approach is trying to address the problem of a large and complex collection of data sets that become difficult to handle using traditional data processing applications. Using these new technologies, it should be possible to store all the monitoring information for a time window of months or a year. This report contains an initial evaluation of Hadoop for storage of data flow monitoring and subsequent data mining.

  18. Salmonella Dublin kan give store tab

    DEFF Research Database (Denmark)

    Nielsen, Torben Dahl; Nielsen, Liza Rosenbaum; Kudahl, Anne Margrethe Braad

    2012-01-01

    Store besætninger lider størst økonomisk tab ved infektion med Salmonella Dublin. Selv i en veldrevet besætning kan tabet løbe op i mellem 1,3 og 3,3 millioner kr. over en tiårs periode. Ved uhensigtsmæssige hygiejne- og managementrutiner kan tabet nemt blive meget højere.......Store besætninger lider størst økonomisk tab ved infektion med Salmonella Dublin. Selv i en veldrevet besætning kan tabet løbe op i mellem 1,3 og 3,3 millioner kr. over en tiårs periode. Ved uhensigtsmæssige hygiejne- og managementrutiner kan tabet nemt blive meget højere....

  19. Electrical machines diagnosis

    CERN Document Server

    Trigeassou, Jean-Claude

    2013-01-01

    Monitoring and diagnosis of electrical machine faults is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives.This book provides a survey of the techniques used to detect the faults occurring in electrical drives: electrical, thermal and mechanical faults of the electrical machine, faults of the static converter and faults of the energy storage unit.Diagnosis of faults occurring in electrical drives is an essential part of a global monitoring system used to improve reliability and serviceability. This diagnosis is perf

  20. Refrigerating machine oil

    Energy Technology Data Exchange (ETDEWEB)

    Nozawa, K.

    1981-03-17

    Refrigerating machine oil to be filled in a sealed motorcompressor unit constituting a refrigerating cycle system including an electric refrigerator, an electric cold-storage box, a small-scaled electric refrigerating show-case, a small-scaled electric cold-storage show-case and the like, is arranged to have a specifically enhanced property, in which smaller initial driving power consumption of the sealed motor-compressor and easier supply of the predetermined amount of the refrigerating machine oil to the refrigerating system are both guaranteed even in a rather low environmental temperature condition.

  1. Machine shop basics

    CERN Document Server

    Miller, Rex

    2004-01-01

    Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

  2. Electrical machines & their applications

    CERN Document Server

    Hindmarsh, J

    1984-01-01

    A self-contained, comprehensive and unified treatment of electrical machines, including consideration of their control characteristics in both conventional and semiconductor switched circuits. This new edition has been expanded and updated to include material which reflects current thinking and practice. All references have been updated to conform to the latest national (BS) and international (IEC) recommendations and a new appendix has been added which deals more fully with the theory of permanent-magnets, recognising the growing importance of permanent-magnet machines. The text is so arra

  3. Clojure for machine learning

    CERN Document Server

    Wali, Akhil

    2014-01-01

    A book that brings out the strengths of Clojure programming that have to facilitate machine learning. Each topic is described in substantial detail, and examples and libraries in Clojure are also demonstrated.This book is intended for Clojure developers who want to explore the area of machine learning. Basic understanding of the Clojure programming language is required, but thorough acquaintance with the standard Clojure library or any libraries are not required. Familiarity with theoretical concepts and notation of mathematics and statistics would be an added advantage.

  4. Perpetual Motion Machine

    OpenAIRE

    D. Tsaousis

    2008-01-01

    Ever since the first century A.D. there have been relative descriptions of known devices as well as manufactures for the creation of perpetual motion machines. Although physics has led, with two thermodynamic laws, to the opinion that a perpetual motion machine is impossible to be manufactured, inventors of every age and educational level appear to claim that they have invented something «entirely new» or they have improved somebody else’s invention, which «will function henceforth perpetuall...

  5. Man - Machine Communication

    CERN Document Server

    Petersen, Peter; Nielsen, Henning

    1984-01-01

    This report describes a Man-to-Machine Communication module which together with a STAC can take care of all operator inputs from the touch-screen, tracker balls and mechanical buttons. The MMC module can also contain a G64 card which could be a GPIB driver but many other G64 cards could be used. The soft-ware services the input devices and makes the results accessible from the CAMAC bus. NODAL functions for the Man Machine Communication is implemented in the STAC and in the ICC.

  6. Machine Fault Signature Analysis

    Directory of Open Access Journals (Sweden)

    Pratesh Jayaswal

    2008-01-01

    Full Text Available The objective of this paper is to present recent developments in the field of machine fault signature analysis with particular regard to vibration analysis. The different types of faults that can be identified from the vibration signature analysis are, for example, gear fault, rolling contact bearing fault, journal bearing fault, flexible coupling faults, and electrical machine fault. It is not the intention of the authors to attempt to provide a detailed coverage of all the faults while detailed consideration is given to the subject of the rolling element bearing fault signature analysis.

  7. Schedulers with load-store queue awareness

    Science.gov (United States)

    Chen, Tong; Eichenberger, Alexandre E.; Jacob, Arpith C.; Sura, Zehra N.

    2017-01-24

    In one embodiment, a computer-implemented method includes tracking a size of a load-store queue (LSQ) during compile time of a program. The size of the LSQ is time-varying and indicates how many memory access instructions of the program are on the LSQ. The method further includes scheduling, by a computer processor, a plurality of memory access instructions of the program based on the size of the LSQ.

  8. Schedulers with load-store queue awareness

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Tong; Eichenberger, Alexandre E.; Jacob, Arpith C.; Sura, Zehra N.

    2017-01-24

    In one embodiment, a computer-implemented method includes tracking a size of a load-store queue (LSQ) during compile time of a program. The size of the LSQ is time-varying and indicates how many memory access instructions of the program are on the LSQ. The method further includes scheduling, by a computer processor, a plurality of memory access instructions of the program based on the size of the LSQ.

  9. Schedulers with load-store queue awareness

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Tong; Eichenberger, Alexandre E.; Jacob, Arpith C.; Sura, Zehra N.

    2017-02-07

    In one embodiment, a computer-implemented method includes tracking a size of a load-store queue (LSQ) during compile time of a program. The size of the LSQ is time-varying and indicates how many memory access instructions of the program are on the LSQ. The method further includes scheduling, by a computer processor, a plurality of memory access instructions of the program based on the size of the LSQ.

  10. Device Stores and Discharges Metered Fluid

    Science.gov (United States)

    Hooper, S. L.; Setzer, D.

    1983-01-01

    Hand-held container accepts measured amount of liquid from pressurized supply. Supply pressure drives spring-loaded piston that stores enough mechanical energy to discharge measured liquid into another container. Original application of container was to rehydrate sterilized pre-packaged food in zerogravity environment of space vehicles. Possible terrestrial applicatios include dispensing of toxic fluids or metering of fluids for household, commercial or laboratory uses.

  11. Gaining Customers` Trust In Online Stores

    OpenAIRE

    Anamaria Severin-Humelnicu

    2010-01-01

    Trust is very important in running businesses on the Internet. It plays a significant role in the actions a consumer undertakes in the online purchase process. An online store will never reach the desired level of sales until it gains the trust of its consumers. Building confidence is the key of succes in electronic commerce. Therefore, any online retailer should strive to achieve this goal

  12. Protecting Stored Data on Android Devices

    Directory of Open Access Journals (Sweden)

    Raluca Alina Cojocaru

    2014-03-01

    Full Text Available According to the latest statistics, the Android has become the world’s most popular operating system used for smartphones. Not only its popularity continues to increase, but also the number of malicious hackers who want to compromise mobile applications for their own gain. This paper reviews the protections offered by the Android Platform for storing application data, and provides means to enforce them.

  13. Design of rotating electrical machines

    CERN Document Server

    Pyrhonen , Juha; Hrabovcova , Valeria

    2013-01-01

    In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machinesAn expanded section on the design of permanent magnet synchronous machines, now repo

  14. Grocery Stores, LAGIC is consulting with local parish GIS departments to create spatially accurate point and polygons data sets including the locations and building footprints of schools, churches, government buildings, law enforcement and emergency response offices, pha, Published in 2011, 1:12000 (1in=1000ft) scale, LSU Louisiana Geographic Information Center (LAGIC).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Grocery Stores dataset current as of 2011. LAGIC is consulting with local parish GIS departments to create spatially accurate point and polygons data sets including...

  15. Grocery Stores, LAGIC is consulting with local parish GIS departments to create spatially accurate point and polygons data sets including the locations and building footprints of schools, churches, government buildings, law enforcement and emergency response offices, pha, Published in 2011, 1:12000 (1in=1000ft) scale, Louisiana Geographic Information Center.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Grocery Stores dataset, published at 1:12000 (1in=1000ft) scale, was produced all or in part from Orthoimagery information as of 2011. It is described as 'LAGIC...

  16. INTELLIGENT BASED AUTOMATED STORE AND RETRIEVAL SYSTEM WITH RADIO FREQUENCY FOR INDUSTRIAL APPLICATIONS

    Directory of Open Access Journals (Sweden)

    K.Anitha

    2013-04-01

    Full Text Available This project proposes a means of intelligence for an RF based automated storage and retrieval system (ASRS. Main objective of this project is to provide intelligence in the existing Warehouse Management System (WMS, which is a non-intelligent machine and mainly used for storing and retrieving of raw products in manufacturing unit. This project aims by implementing intelligence inASRS control along with RF module. ASRS having Programmable Logic Controller, which controls and coordinates the movement and performance of ASRS. Intelligence with ASRS is provided for storing orretrieving appropriate amount of load according to the input from users. Hence the construction and cost of the system is huge, the implementation is simulated using SCADA.

  17. Rein: Taming Tail Latency in Key-Value Stores via Multiget Scheduling

    KAUST Repository

    Reda, Waleed

    2017-04-17

    We tackle the problem of reducing tail latencies in distributed key-value stores, such as the popular Cassandra database.We focus on workloads of multiget requests, which batch together access to several data elements and parallelize read operations across the data store machines. We first analyze a production trace of a real system and quantify the skew due to multiget sizes, key popularity, and other factors. We then proceed to identify opportunities for reduction of tail latencies by recognizing the composition of aggregate requests and by carefully scheduling bottleneck operations that can otherwise create excessive queues. We design and implement a system called Rein, which reduces latency via inter-multiget scheduling using low overhead techniques. We extensively evaluate Rein via experiments in Amazon Web Services (AWS) and simulations. Our scheduling algorithms reduce the median, 95, and 99 percentile latencies by factors of 1.5, 1.5, and 1.9, respectively.

  18. Machine speech and speaking about machines

    Energy Technology Data Exchange (ETDEWEB)

    Nye, A. [Univ. of Wisconsin, Whitewater, WI (United States)

    1996-12-31

    Current philosophy of language prides itself on scientific status. It boasts of being no longer contaminated with queer mental entities or idealist essences. It theorizes language as programmable variants of formal semantic systems, reimaginable either as the properly epiphenomenal machine functions of computer science or the properly material neural networks of physiology. Whether or not such models properly capture the physical workings of a living human brain is a question that scientists will have to answer. I, as a philosopher, come at the problem from another direction. Does contemporary philosophical semantics, in its dominant truth-theoretic and related versions, capture actual living human thought as it is experienced, or does it instead reflect, regardless of (perhaps dubious) scientific credentials, pathology of thought, a pathology with a disturbing social history.

  19. Hybrid machining processes perspectives on machining and finishing

    CERN Document Server

    Gupta, Kapil; Laubscher, R F

    2016-01-01

    This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method of material removal, machining system, process variables and applications. This book provides a deep understanding of the need, application and mechanism of hybrid machining processes.

  20. Electromechanical Battery EMB Mass Minimization taking into Account its Electrical Machines Rotor Energy

    Directory of Open Access Journals (Sweden)

    Podgornovs Andrejs

    2014-12-01

    Full Text Available In this paper the electromechanical battery (EMB with synchronous machine is described. Theoretically, if electrical machines rotor stored energy is known, it is possible to reduce the flywheel mass of electromechanical battery. For example, the efficiency of energy recovery (kilowatt-hours out versus kilowatthours in in nowadays appliances exceeds 95 % which is considerably better than of any electrochemical battery, such as lead-acid battery. For the rotor stored energy amount calculation, it is necessary to find all geometrical dimensions of the electrical machine. To achieve this goal the iterative calculation method was used. Electromechanical battery mass was analyzed as a discharge process rotation speed function. Taking into account the rotor stored energy, we can increase the minimum rotation speed thus reducing the electrical machine mass and increasing the flywheel mass, which provides EMB cost reduction. Additionally, the possibilities of using numerical approximation calculations of magnetization curves are discussed. Each iteration of numerical application necessary for the method for rapid calculation is essential when calculating the field problems. Nowadays there are a lot of computer added design programs for electromagnetic field calculation in different types of applications, electrical machines and apparatus. For the electromagnetic field calculation process some more commonly used magnetization curve approximation methods are described, and the machine calculation time is tested for different numbers of calculations.

  1. Cybernetic anthropomorphic machine systems

    Science.gov (United States)

    Gray, W. E.

    1974-01-01

    Functional descriptions are provided for a number of cybernetic man machine systems that augment the capacity of normal human beings in the areas of strength, reach or physical size, and environmental interaction, and that are also applicable to aiding the neurologically handicapped. Teleoperators, computer control, exoskeletal devices, quadruped vehicles, space maintenance systems, and communications equipment are considered.

  2. ARM : abstract rewriting machine

    NARCIS (Netherlands)

    J.F.T. Kamperman; H.R. Walters (Pum)

    1993-01-01

    textabstractTerm rewriting is frequently used as implementation technique for algebraic specifications. In this paper we present the abstract term rewriting machine (ARM), which has an extremely compact instruction set and imposes no restrictions on the implemented TRSs. Apart from standard

  3. A "Living" Machine

    Institute of Scientific and Technical Information of China (English)

    N.R.Bogatyrev

    2004-01-01

    Biomimetics (or bionics) is the engineering discipline that constructs artificial systems using biological principles. The ideal final result in biomimetics is to create a living machine. But what are the desirable and non-desirable properties of biomimetic product? Where can natural prototypes be found? How can technical solutions be transferred from nature to technology? Can we use living nature like LEGO bricks for construction our machines? How can biology help us? What is a living machine? In biomimetic practice only some "part" (organ, part of organ, tissue) of the observed whole organism is utilized. A possible template for future super-organism extension for biomimetic methods might be drawn from experiments in holistic ecological agriculture (ecological design, permaculture, ecological engineering, etc. ). The necessary translation of these rules to practical action can be achieved with the Russian Theory of Inventive Problem Solving (TRIZ), specifically adjusted to biology. Thus, permaculture, reinforced by a TRIZ conceptual framework, might provide the basis for Super-Organismic Bionics, which is hypothesized as necessary for effective ecological engineering. This hypothesis is supported by a case study-the design of a sustainable artificial nature reserve for wild pollinators as a living machine.

  4. Of machines and men ...

    CERN Multimedia

    CERN; Daniel Boileau

    1990-01-01

    Engineering and construction at LEP. Committed work and physicists motivation to work on this type of machine. With Guido Altarelli Theory Division Physicist, Ugo Amaldi Delphi Experiment Spokesman, Oscar Barbalat Head of Industry and Technology Liaison Office, Jonathan Ellis Head of Theory Division.

  5. Technology Time Machine 2012

    DEFF Research Database (Denmark)

    Lehner, Wolfgang; Fettweis, Gerhard; Fitzek, Frank

    2013-01-01

    The IEEE Technology Time Machine (TTM) is a unique event for industry leaders, academics, and decision making government officials who direct R&D activities, plan research programs or manage portfolios of research activities. This report covers the main topics of the 2nd Symposium of future...

  6. Training Restricted Boltzmann Machines

    DEFF Research Database (Denmark)

    Fischer, Asja

    Restricted Boltzmann machines (RBMs) are probabilistic graphical models that can also be interpreted as stochastic neural networks. Training RBMs is known to be challenging. Computing the likelihood of the model parameters or its gradient is in general computationally intensive. Thus, training...

  7. Laser machining of explosives

    Science.gov (United States)

    Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  8. Electrical Discharge Machining.

    Science.gov (United States)

    Montgomery, C. M.

    The manual is for use by students learning electrical discharge machining (EDM). It consists of eight units divided into several lessons, each designed to meet one of the stated objectives for the unit. The units deal with: introduction to and advantages of EDM, the EDM process, basic components of EDM, reaction between forming tool and workpiece,…

  9. The Answer Machine.

    Science.gov (United States)

    Feldman, Susan

    2000-01-01

    Discusses information retrieval systems and the need to have them adapt to user needs, integrate information in any format, reveal patterns and trends in information, and answer questions. Topics include statistics and probability; natural language processing; intelligent agents; concept mapping; machine-aided indexing; text mining; filtering;…

  10. Massively collaborative machine learning

    NARCIS (Netherlands)

    Rijn, van J.N.

    2016-01-01

    Many scientists are focussed on building models. We nearly process all information we perceive to a model. There are many techniques that enable computers to build models as well. The field of research that develops such techniques is called Machine Learning. Many research is devoted to develop comp

  11. Recent Advances on Permanent Magnet Machines

    Institute of Scientific and Technical Information of China (English)

    诸自强

    2012-01-01

    This paper overviews advances on permanent magnet(PM) brushless machines over last 30 years,with particular reference to new and novel machine topologies.These include current states and trends for surface-mounted and interior PM machines,electrically and mechanically adjusted variable flux PM machines including memory machine,hybrid PM machines which uniquely integrate PM technology into induction machines,switched and synchronous reluctance machines and wound field machines,Halbach PM machines,dual-rotor PM machines,and magnetically geared PM machines,etc.The paper highlights their features and applications to various market sectors.

  12. A randomized controlled study of a healthy corner store initiative on the purchases of urban, low-income youth.

    Science.gov (United States)

    Lent, Michelle R; Vander Veur, Stephanie S; McCoy, Tara A; Wojtanowski, Alexis C; Sandoval, Brianna; Sherman, Sandy; Komaroff, Eugene; Foster, Gary D

    2014-12-01

    Although many initiatives exist to improve the availability of healthy foods in corner stores, few randomized trials have assessed their effects. This study evaluated, in a randomized controlled trial, the effects of a first-generation healthy corner store intervention on students' food and beverage purchases over a 2-year period. Participants (n = 767) were fourth-, fifth-, and sixth-grade students. Ten schools and their nearby corner stores (n = 24) were randomly assigned to the healthy corner store intervention or an assessment-only control. Intercept surveys directly assessed the nutritional characteristics of students' corner store purchases at baseline, 1 and 2 years. Students' weight and heights were measured at baseline, 1 and 2 years. There were no differences in energy content per intercept purchased from control or intervention schools at year 1 (P = 0.12) or 2 (P = 0.58). There were no differences between control and intervention students in BMI z score (year 1, P = 0.83; year 2, P = 0. 98) or obesity prevalence (year 1, P = 0.96; year 2, P = 0.58). A healthy corner store initiative did not result in significant changes in the energy content of corner store purchases or in continuous or categorical measures of obesity. These data will help to inform future interventions. © 2014 The Obesity Society.

  13. Motherhood and the Machine

    Directory of Open Access Journals (Sweden)

    Miglena Nikolchina

    2014-12-01

    Full Text Available In her conceptualization of the human as defined by the capacity for revolt Kristeva unavoidably touches upon issues of robotization, technology, and the virtual. The concepts of animal and machine, however, although they do appear occasionally and in important ways, are never at the focus of her inquiries and are absent in her “New Forms of Revolt.” Yet these two concepts to a large extent define the field of contemporary philosophical debates of the human giving rise to three major theoretical orientations. On the one hand, there is the trend which tries to come to terms with technological novelties and the merging of human and machine that they imply. This trend unfolds under the rubric of “transhuman” or “posthuman” and of the “enhancement” of man. The second trend predominates in animal studies. Mostly in an ethical perspective but also ontologically, this trend, to which Derrida’s later writing made a significant contribution, questions the idea of the “human exception” and the rigorous distinction between man and animal on which this exception rests. While apparently antagonistic, both trends align the human with the animal and oppose it to technology. The third trend collapses the distinctions on which the previous two rely through the lens of biopolitics: drawing on Heidegger, Kojève, and Foucault, it regards contemporary technological transformations as amounting to the animalization of man.  The human disappears in the animal, in the machine, or in the indistinguishability of the two, confirming what Agamben has described as the inoperativeness of the anthropological machine. The present text turns to Kristeva’s conceptions of motherhood and revolt as introducing a powerful inflection in this tripartite field. Remarkably, it is precisely new sagas of rebellious machines like Battlestar “Galactica” that foreground the relevance of Kristeva’s approach.

  14. Perturbed Motion of Airplane and Safe Store Separation

    Directory of Open Access Journals (Sweden)

    S. C. Raisinghani

    1984-07-01

    Full Text Available A method is presented to predict the perturbed motion of an airplane following stores jettisoning. The mass, moment of inertia, forces, and moments acting on the airplane are suitable split into contributions from the stores and the rest of the airplane parts. The seperation of stores is assumed to result in a step change of mass, moment of intertai, forces, and moments contributed by stores. The resulting set of perturbed state equations of motion are solved for two illustrative airplane stroes combination. A criterion is evolved to qualitatively indicate locations for safe store separation. It is suggested that the present method be used to predict airplane perturbed motion following stores separation for a given airplane store combination and results be used in conjunction with store trajectory analysis for finally declaring a store location as safe unsafe.

  15. Machine learning in image steganalysis

    CERN Document Server

    Schaathun, Hans Georg

    2012-01-01

    "The only book to look at steganalysis from the perspective of machine learning theory, and to apply the common technique of machine learning to the particular field of steganalysis; ideal for people working in both disciplines"--

  16. New Applications of Learning Machines

    DEFF Research Database (Denmark)

    Larsen, Jan

    * Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection......* Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection...

  17. New Applications of Learning Machines

    DEFF Research Database (Denmark)

    Larsen, Jan

    * Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection......* Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection...

  18. Hinged Shields for Machine Tools

    Science.gov (United States)

    Lallande, J. B.; Poland, W. W.; Tull, S.

    1985-01-01

    Flaps guard against flying chips, but fold away for tool setup. Clear plastic shield in position to intercept flying chips from machine tool and retracted to give operator access to workpiece. Machine shops readily make such shields for own use.

  19. School-Based Enterprise.

    Science.gov (United States)

    Ross, Sophia M.

    2002-01-01

    Describes STORiole, the school store operated by marketing management and Distributive Education Clubs of America (DECA) Students at St. Louis Park High School in Minnesota. Describes the project as an excellent way for marketing teachers to teach transferable and soft skills that employers want. (Author/JOW)

  20. Design of Sugarcane Peeling Machine

    Directory of Open Access Journals (Sweden)

    Ge Xinfeng

    2015-02-01

    Full Text Available In order to solve the problem that appeared in hand peeling sugarcane, the sugarcane peeling machine is designed, the sugarcane peeling machine includes motor, groove wheel, cutting room, slider crank mechanism, reducer (including belt drive, chain drive and so on. The designed sugarcane peeling machine is simulated, the results show that the sugarcane peeling machine can peel sugarcane successfully with convenient, fast and uniform.

  1. Automatically-Programed Machine Tools

    Science.gov (United States)

    Purves, L.; Clerman, N.

    1985-01-01

    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  2. Automatically-Programed Machine Tools

    Science.gov (United States)

    Purves, L.; Clerman, N.

    1985-01-01

    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  3. Feature Recognition for Virtual Machining

    OpenAIRE

    Xú, Shixin; Anwer, Nabil; Qiao, Lihong

    2014-01-01

    International audience; Virtual machining uses software tools to simulate machining processes in virtual environments ahead of actual production. This paper proposes that feature recognition techniques can be applied in the course of virtual machining, such as identifying some process problems, and presenting corresponding correcting advices. By comparing with the original CAD model, form errors of the machining features can be found. And then corrections are suggested to process designers. T...

  4. The Neural Support Vector Machine

    NARCIS (Netherlands)

    Wiering, Marco; van der Ree, Michiel; Embrechts, Mark; Stollenga, Marijn; Meijster, Arnold; Nolte, A; Schomaker, Lambertus

    2013-01-01

    This paper describes a new machine learning algorithm for regression and dimensionality reduction tasks. The Neural Support Vector Machine (NSVM) is a hybrid learning algorithm consisting of neural networks and support vector machines (SVMs). The output of the NSVM is given by SVMs that take a

  5. The Neural Support Vector Machine

    NARCIS (Netherlands)

    Wiering, Marco; van der Ree, Michiel; Embrechts, Mark; Stollenga, Marijn; Meijster, Arnold; Nolte, A; Schomaker, Lambertus

    2013-01-01

    This paper describes a new machine learning algorithm for regression and dimensionality reduction tasks. The Neural Support Vector Machine (NSVM) is a hybrid learning algorithm consisting of neural networks and support vector machines (SVMs). The output of the NSVM is given by SVMs that take a centr

  6. Storing wind energy into electrical accumulators

    Science.gov (United States)

    Dordescu, M.; Petrescu, D. I.; Erdodi, G. M.

    2016-12-01

    Shall be determined, in this work, the energy stored in the accumulators electrical, AE, at a wind system operating at wind speeds time-varying. mechanical energy caught in the turbine from the wind, (TV), is transformed into electrical energy by the generator synchronous with the permanent magnets, GSMP. The Generator synchronous with the permanent magnets saws, via a rectifier, energy in a battery AE, finished in a choice of two: variant 1-unregulated rectifier and variant of the 2-controlled rectifier and task adapted. Through simulation determine the differences between the two versions

  7. Business Plan: Video Game Rental Store

    OpenAIRE

    Kemppi, Tuomas

    2013-01-01

    The purpose of this report is to create a business plan for a video game rental store. It includes research on similar companies in other countries, and it determines if the concept would work in Finland. In addition to this, the report also includes research on what steps need to be taken in order to start and run a video game rental business in Finland. The report also goes over the current trends in the video game industry, and takes a look at where the industry is heading. Based...

  8. RFID Makes Common People an Uncommon Store

    Institute of Scientific and Technical Information of China (English)

    Mark; Roberti

    2010-01-01

    The Mexican retailer is using RFID to enhance the customer experience,and to provide supplierswith better inventory data. Dec.13,2010-Common People,an independent conceptstore that opened last month in Mexico City,is employing radiofrequency identification technology to enhance an already uncom-mon customer experience,as well as improve the management ofinventory."When we came up with the idea for a concept store,we knewwe wanted to bring in not just the most interesting products,but

  9. Project StORe: Social Science report

    OpenAIRE

    Burton, Guy

    2006-01-01

    There was widespread support across the social science research community regarding the aims of the StORe Project Nearly half of social science respondents claimed that both source-to-output and out-put-to source repositories would offer a ‘significant advantage to my work’; a third in both cases claimed it would be ‘useful but not of major significance’ Postgraduate students were generally more enthusiastic about source-to-output and output-to-source repositories than acade...

  10. Stochastic Optimal Control Models for Online Stores

    CERN Document Server

    Bradonjić, Milan

    2011-01-01

    We present a model for the optimal design of an online auction/store by a seller. The framework we use is a stochastic optimal control problem. In our setting, the seller wishes to maximize her average wealth level, where she can control her price per unit via her reputation level. The corresponding Hamilton-Jacobi-Bellmann equation is analyzed for an introductory case. We then turn to an empirically justified model, and present introductory analysis. In both cases, {\\em pulsing} advertising strategies are recovered for resource allocation. Further numerical and functional analysis will appear shortly.

  11. Prediction of Machine Tool Condition Using Support Vector Machine

    Science.gov (United States)

    Wang, Peigong; Meng, Qingfeng; Zhao, Jian; Li, Junjie; Wang, Xiufeng

    2011-07-01

    Condition monitoring and predicting of CNC machine tools are investigated in this paper. Considering the CNC machine tools are often small numbers of samples, a condition predicting method for CNC machine tools based on support vector machines (SVMs) is proposed, then one-step and multi-step condition prediction models are constructed. The support vector machines prediction models are used to predict the trends of working condition of a certain type of CNC worm wheel and gear grinding machine by applying sequence data of vibration signal, which is collected during machine processing. And the relationship between different eigenvalue in CNC vibration signal and machining quality is discussed. The test result shows that the trend of vibration signal Peak-to-peak value in surface normal direction is most relevant to the trend of surface roughness value. In trends prediction of working condition, support vector machine has higher prediction accuracy both in the short term ('One-step') and long term (multi-step) prediction compared to autoregressive (AR) model and the RBF neural network. Experimental results show that it is feasible to apply support vector machine to CNC machine tool condition prediction.

  12. A Boltzmann machine for the organization of intelligent machines

    Science.gov (United States)

    Moed, Michael C.; Saridis, George N.

    1989-01-01

    In the present technological society, there is a major need to build machines that would execute intelligent tasks operating in uncertain environments with minimum interaction with a human operator. Although some designers have built smart robots, utilizing heuristic ideas, there is no systematic approach to design such machines in an engineering manner. Recently, cross-disciplinary research from the fields of computers, systems AI and information theory has served to set the foundations of the emerging area of the design of intelligent machines. Since 1977 Saridis has been developing an approach, defined as Hierarchical Intelligent Control, designed to organize, coordinate and execute anthropomorphic tasks by a machine with minimum interaction with a human operator. This approach utilizes analytical (probabilistic) models to describe and control the various functions of the intelligent machine structured by the intuitively defined principle of Increasing Precision with Decreasing Intelligence (IPDI) (Saridis 1979). This principle, even though resembles the managerial structure of organizational systems (Levis 1988), has been derived on an analytic basis by Saridis (1988). The purpose is to derive analytically a Boltzmann machine suitable for optimal connection of nodes in a neural net (Fahlman, Hinton, Sejnowski, 1985). Then this machine will serve to search for the optimal design of the organization level of an intelligent machine. In order to accomplish this, some mathematical theory of the intelligent machines will be first outlined. Then some definitions of the variables associated with the principle, like machine intelligence, machine knowledge, and precision will be made (Saridis, Valavanis 1988). Then a procedure to establish the Boltzmann machine on an analytic basis will be presented and illustrated by an example in designing the organization level of an Intelligent Machine. A new search technique, the Modified Genetic Algorithm, is presented and proved

  13. Bioprocessing of a stored mixed liquid waste

    Energy Technology Data Exchange (ETDEWEB)

    Wolfram, J.H.; Rogers, R.D. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Finney, R. [Mound Applied Technologies, Miamisburg, OH (United States)] [and others

    1995-12-31

    This paper describes the development and results of a demonstration for a continuous bioprocess for mixed waste treatment. A key element of the process is an unique microbial strain which tolerates high levels of aromatic solvents and surfactants. This microorganism is the biocatalysis of the continuous flow system designed for the processing of stored liquid scintillation wastes. During the past year a process demonstration has been conducted on commercial formulation of liquid scintillation cocktails (LSC). Based on data obtained from this demonstration, the Ohio EPA granted the Mound Applied Technologies Lab a treatability permit allowing the limited processing of actual mixed waste. Since August 1994, the system has been successfully processing stored, {open_quotes}hot{close_quotes} LSC waste. The initial LSC waste fed into the system contained 11% pseudocumene and detectable quantities of plutonium. Another treated waste stream contained pseudocumene and tritium. Data from this initial work shows that the hazardous organic solvent, and pseudocumene have been removed due to processing, leaving the aqueous low level radioactive waste. Results to date have shown that living cells are not affected by the dissolved plutonium and that 95% of the plutonium was sorbed to the biomass. This paper discusses the bioprocess, rates of processing, effluent, and the implications of bioprocessing for mixed waste management.

  14. Modern Stored-Product Insect Pest Management

    Directory of Open Access Journals (Sweden)

    Hagstrum David William

    2014-07-01

    Full Text Available Stored-product entomologists have a variety of new monitoring, decision-making, biological, chemical, and physical pest management tools available to them. Two types of stored-product insect populations are of interest: insects of immediate economic importance infesting commodities, and insects that live in food residues in equipment and facilities. The sampling and control methods change as grain and grain products move from field to consumer. There are also some changes in the major insect pest species to take into consideration. In this review, we list the primary insect pests at each point of the marketing system, and indicate which sampling methods and control strategies are most appropriate. Economic thresholds for insect infestation levels developed for raw commodity storage, processing plants, and retail business allow sampling-based pest management to be done before insect infestations cause economic injury. Taking enough samples to have a representative sample (20-30 samples will generally provide enough information to classify a population as above or below an economic threshold.

  15. Atomic physics experiments with cooled stored ions

    Science.gov (United States)

    Schuch, Reinhold

    2004-10-01

    This presentation contains examples of recent atomic physics experiments with stored and cooled ion beams from the CRYRING facility in Stockholm. One of these experiments uses the high luminosity of a cooled MeV proton beam in a He COLTRIMS apparatus (COLd supersonic He gas-jet Target for Recoil Ion Momentum Spectroscopy) for measuring correlation effects in transfer ionization. Another class of experiments exploits the cold electron beam available in the CRYRING electron cooler and cooled heavy-ion beams for recombination experiments. A section concerns the still rather open question of the puzzling recombination enhancement over the radiative recombination theory. Dielectronic resonances at meV-eV energy are measured with a resolution in the order of 10-3-10-2 eV with highly charged ions stored at several hundreds of MeV kinetic energy in the ring. These resonances provide a serious challenge to theories for describing correlation, relativistic, QED effects, and isotope shifts in highly ionized ions. Applications of recombination rates with complex highly charged ions for fusion and astrophysical plasmas are shown.

  16. Atomic physics experiments with cooled stored ions

    Energy Technology Data Exchange (ETDEWEB)

    Schuch, Reinhold E-mail: schuch@physto.se

    2004-10-11

    This presentation contains examples of recent atomic physics experiments with stored and cooled ion beams from the CRYRING facility in Stockholm. One of these experiments uses the high luminosity of a cooled MeV proton beam in a He COLTRIMS apparatus (COLd supersonic He gas-jet Target for Recoil Ion Momentum Spectroscopy) for measuring correlation effects in transfer ionization. Another class of experiments exploits the cold electron beam available in the CRYRING electron cooler and cooled heavy-ion beams for recombination experiments. A section concerns the still rather open question of the puzzling recombination enhancement over the radiative recombination theory. Dielectronic resonances at meV-eV energy are measured with a resolution in the order of 10{sup -3}-10{sup -2} eV with highly charged ions stored at several hundreds of MeV kinetic energy in the ring. These resonances provide a serious challenge to theories for describing correlation, relativistic, QED effects, and isotope shifts in highly ionized ions. Applications of recombination rates with complex highly charged ions for fusion and astrophysical plasmas are shown.

  17. Storing natural gas as frozen hydrate

    Energy Technology Data Exchange (ETDEWEB)

    Gudmundsson, J.S.; Khokhar, A.A. (Univ. of Trondheim (Norway)); Parlaktuna, M. (Middle East Technical Univ., Ankara (Turkey))

    1994-02-01

    The formation of natural gas hydrates is a well-known problem in the petroleum and natural gas industries. Hydrates are solid materials that form when liquid water and natural gas are brought in contact under pressure. Hydrate formation need not be a problem. On the contrary, it can be an advantage. The volume of hydrates is much less than that of natural gas. At standard conditions, hydrates occupy 150 to 170 times less volume than the corresponding gas. Typically, natural gas hydrates contain 15% gas and 85% water by mass. It follows that hydrates can be used for large-scale storage of natural gas. Benesh proposed using hydrates to improve the load factor of natural gas supply systems. The author suggested that hydrates could be produced by bringing liquid water into contact with natural gas at the appropriate temperature and high pressure. The hydrate then would be stored at a temperature and pressure where it was stable. When gas was needed for the supply system, the hydrate would be melted at low pressure. The stability of a natural gas hydrate during storage at atmospheric pressure and below-freezing temperatures was studied in the laboratory. The gas hydrate was produced in a stirred vessel at 2- to 6-MPa pressure and temperatures from 0 to 20 C. The hydrate was refrigerated and stored in deep freezers at [minus]5, [minus]10, and [minus]18 C for up to 10 days. The natural gas hydrate remained stable when kept frozen at atmospheric pressure.

  18. Mycotoxigenic molds in spices from Macedonian stores

    Directory of Open Access Journals (Sweden)

    Kungulovski Džoko

    2011-01-01

    Full Text Available Twenty-six samples of spices most frequently occurring in the stores of the Republic of Macedonia were examined for their fungal contamination and the incidence of Aspergillus and Penicillium species and their teleomorphs. It included mainly commercial packages most frequently occurring in the stores of the Republic of Macedonia. According to the relative frequency of each of the isolated species, the typical mycoflora of these samples includes A. niger, A. flavus, A. fumigatus, P. chrysogenum and Eurotium sp. Fungal counts varied from log10 < 2 CFU g-1 (DG18 at 25oC; DRBC at 25oC, for a sample of paprika, to log10 6.17 CFU g-1 (DG18 at 25oC, for a sample of bay leaf. During the experiment, A. flavus was detected in 17 samples, out of which 7 isolates were capable of producing Af-B1, and 4 isolates produced Af-B2. All isolates of A. nomius and A. parasiticus, in the experimental conditions, produced Af-B1, Af-B2, Af-G1 and Af-G2.

  19. Engineering molecular machines

    Science.gov (United States)

    Erman, Burak

    2016-04-01

    Biological molecular motors use chemical energy, mostly in the form of ATP hydrolysis, and convert it to mechanical energy. Correlated thermal fluctuations are essential for the function of a molecular machine and it is the hydrolysis of ATP that modifies the correlated fluctuations of the system. Correlations are consequences of the molecular architecture of the protein. The idea that synthetic molecular machines may be constructed by designing the proper molecular architecture is challenging. In their paper, Sarkar et al (2016 New J. Phys. 18 043006) propose a synthetic molecular motor based on the coarse grained elastic network model of proteins and show by numerical simulations that motor function is realized, ranging from deterministic to thermal, depending on temperature. This work opens up a new range of possibilities of molecular architecture based engine design.

  20. Boosting Support Vector Machines

    Directory of Open Access Journals (Sweden)

    Elkin Eduardo García Díaz

    2006-11-01

    Full Text Available En este artículo, se presenta un algoritmo de clasificación binaria basado en Support Vector Machines (Máquinas de Vectores de Soporte que combinado apropiadamente con técnicas de Boosting consigue un mejor desempeño en cuanto a tiempo de entrenamiento y conserva características similares de generalización con un modelo de igual complejidad pero de representación más compacta./ In this paper we present an algorithm of binary classification based on Support Vector Machines. It is combined with a modified Boosting algorithm. It run faster than the original SVM algorithm with a similar generalization error and equal complexity model but it has more compact representation.

  1. Quo vadis, Intelligent Machine?

    Directory of Open Access Journals (Sweden)

    Rosemarie Velik

    2010-09-01

    Full Text Available Artificial Intelligence (AI is a branch of computer science concerned with making computers behave like humans. At least this was the original idea. However, it turned out that this is no task easy to be solved. This article aims to give a comprehensible review on the last 60 years of artificial intelligence taking a philosophical viewpoint. It is outlined what happened so far in AI, what is currently going on in this research area, and what can be expected in future. The goal is to mediate an understanding for the developments and changes in thinking in course of time about how to achieve machine intelligence. The clear message is that AI has to join forces with neuroscience and other brain disciplines in order to make a step towards the development of truly intelligent machines.

  2. Technological requirements of profile machining

    Institute of Scientific and Technical Information of China (English)

    PARK Sangchul; CHUNG Yunchan

    2006-01-01

    The term ‘profile machining’is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flangedies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control,minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.

  3. Machining fiber-reinforced composites

    Science.gov (United States)

    Komanduri, Ranga

    1993-04-01

    Compared to high tool wear and high costs of tooling of fiber-reinforced composites (FRCs), noncontact material-removal processes offer attractive alternative. Noncontact machining methods can also minimize dust, noise, and extensive plastic deformation and consequent heat generation associated with conventional machining of FRCs, espacially those with an epoxy matrix. The paper describes the principles involved in and the details of machining of FRCs by laser machining, water jet-cutting and abrasive water jet-cutting, and electrical discharge machining of composites, as well as the limitations of each method.

  4. Future database machine architectures

    OpenAIRE

    Hsiao, David K.

    1984-01-01

    There are many software database management systems available on many general-purpose computers ranging from micros to super-mainframes. Database machines as backened computers can offload the database management work from the mainframe so that we can retain the same mainframe longer. However, the database backend must also demonstrate lower cost, higher performance, and newer functionality. Some of the fundamental architecture issues in the design of high-performance and great-capacity datab...

  5. Machine Learning at Scale

    OpenAIRE

    Izrailev, Sergei; Stanley, Jeremy M.

    2014-01-01

    It takes skill to build a meaningful predictive model even with the abundance of implementations of modern machine learning algorithms and readily available computing resources. Building a model becomes challenging if hundreds of terabytes of data need to be processed to produce the training data set. In a digital advertising technology setting, we are faced with the need to build thousands of such models that predict user behavior and power advertising campaigns in a 24/7 chaotic real-time p...

  6. Cost of photochemical machining

    OpenAIRE

    Roy, Rajkumar; Allen, David; Zamora, Oscar

    2004-01-01

    Photochemical machining (PCM), also known as photoetching, photofabrication or photochemical milling, is a non-traditional manufacturing method based on the combination of photoresist imaging and chemical etching. PCM uses techniques similar to those employed for the production of printed circuit boards and silicon integrated circuits. The PCM industry plays a valuable worldwide role in the production of metal precision parts and decorative items. Parts produced by PCM are t...

  7. Austempered Ductile Iron Machining

    Science.gov (United States)

    Pilc, Jozef; Šajgalík, Michal; Holubják, Jozef; Piešová, Marianna; Zaušková, Lucia; Babík, Ondrej; Kuždák, Viktor; Rákoci, Jozef

    2015-12-01

    This article deals with the machining of cast iron. In industrial practice, Austempered Ductile Iron began to be used relatively recently. ADI is ductile iron that has gone through austempering to get improved properties, among which we can include strength, wear resistance or noise damping. This specific material is defined also by other properties, such as high elasticity, ductility and endurance against tenigue, which are the properties, that considerably make the tooling characteristic worse.

  8. Quantum Virtual Machine (QVM)

    Energy Technology Data Exchange (ETDEWEB)

    2016-11-18

    There is a lack of state-of-the-art HPC simulation tools for simulating general quantum computing. Furthermore, there are no real software tools that integrate current quantum computers into existing classical HPC workflows. This product, the Quantum Virtual Machine (QVM), solves this problem by providing an extensible framework for pluggable virtual, or physical, quantum processing units (QPUs). It enables the execution of low level quantum assembly codes and returns the results of such executions.

  9. Agent Based Computing Machine

    Science.gov (United States)

    2005-12-09

    be used in Phase 2 to accomplish the following enhancements. Due to the speed and support of MPI for C/C++ on Beowulf clusters , these languages could...1.7 ABC Machine Formal Definition 24 1.8 Computational Analysis 31 1.9 Programming Concepts 34 1.10 Cluster Mapping 38 1.11 Phase 1 Results 43 2...options for hardware implementation are explored including an emulation with a high performance cluster , a high performance silicon chip and the

  10. Magnetic Electrochemical Finishing Machining

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    How to improve the finishing efficiency and surface roughness have been all along the objective of research in electrochemical polishing. However, the research activity, i.e. during electrochemical polishing, directly introduce the magnetic field to study how the magnetic field influences on the finishing efficiency, quality and the electrochemical process in the field of finishing machining technology, is insufficient. When introducing additional magnetic field in the traditional electrochemical pol...

  11. FMS precision machining

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, M.W.

    1980-01-01

    In evaluating the technical obstacles and accuracy limits to producing a Precision Flexible Manufacturing System, a current system is subjected to an error budget analysis. It is noted that to make complex part geometries with tolerances in the lower thousandths range, machining to tenths is required for process control. Actual parts made to tenths are illustrated, along with a discussion of the requirements for automation and for process control.

  12. Machine on Trial

    Science.gov (United States)

    2012-06-01

    front of the Judge, how did we come to justify the ethical use of such a machine? The Judge called for a recess so that he could further educate ...commerce, where money would change hands, or for the purposes of controlling critical systems.”29 The initial group that set up the ARPANET did not... EBook of Fundamental Principals of the Metaphysic of Morals, May, 2004 [ EBook #5682 translated by Thomas Kingsmill Abbott, 12. http://manybooks.net

  13. Electrochemical Discharge Machining Process

    Directory of Open Access Journals (Sweden)

    Anjali V. Kulkarni

    2007-09-01

    Full Text Available Electrochemical discharge machining process is evolving as a promising micromachiningprocess. The experimental investigations in the present work substantiate this trend. In the presentwork, in situ, synchronised, transient temperature and current measurements have been carriedout. The need for the transient measurements arose due to the time-varying nature of the dischargeformation and time varying circuit current. Synchronised and transient measurements revealedthe discrete nature of the process. It also helped in formulating the basic mechanism for thedischarge formation and the material removal in the process. Temperature profile on workpieceand in electrochemical discharge machining cell is experimentally measured using pyrometer,and two varieties of K-type thermocouples. Surface topography of the discharge-affected zoneson the workpiece has been carried out using scanning electron microscope. Measurements andsurface topographical studies reveal the potential use of this process for machining in micronregime. With careful experimental set-up design, suitable supply voltage and its polarity, theprocess can be applied for both micromachining and micro-deposition. It can be extended formachining and or deposition of wide range of materials.

  14. Introduction: Minds, Bodies, Machines

    Directory of Open Access Journals (Sweden)

    Deirdre Coleman

    2008-10-01

    Full Text Available This issue of 19 brings together a selection of essays from an interdisciplinary conference on 'Minds, Bodies, Machines' convened last year by Birkbeck's Centre for Nineteenth-Century Studies, University of London, in partnership with the English programme, University of Melbourne and software developers Constraint Technologies International (CTI. The conference explored the relationship between minds, bodies and machines in the long nineteenth century, with a view to understanding the history of our technology-driven, post-human visions. It is in the nineteenth century that the relationship between the human and the machine under post-industrial capitalism becomes a pervasive theme. From Blake on the mills of the mind by which we are enslaved, to Carlyle's and Arnold's denunciation of the machinery of modern life, from Dickens's sooty fictional locomotive Mr Pancks, who 'snorted and sniffed and puffed and blew, like a little labouring steam-engine', and 'shot out […]cinders of principles, as if it were done by mechanical revolvency', to the alienated historical body of the late-nineteenth-century factory worker under Taylorization, whose movements and gestures were timed, regulated and rationalised to maximize efficiency; we find a cultural preoccupation with the mechanisation of the nineteenth-century human body that uncannily resonates with modern dreams and anxieties around technologies of the human.

  15. Machine Learning in Medicine.

    Science.gov (United States)

    Deo, Rahul C

    2015-11-17

    Spurred by advances in processing power, memory, storage, and an unprecedented wealth of data, computers are being asked to tackle increasingly complex learning tasks, often with astonishing success. Computers have now mastered a popular variant of poker, learned the laws of physics from experimental data, and become experts in video games - tasks that would have been deemed impossible not too long ago. In parallel, the number of companies centered on applying complex data analysis to varying industries has exploded, and it is thus unsurprising that some analytic companies are turning attention to problems in health care. The purpose of this review is to explore what problems in medicine might benefit from such learning approaches and use examples from the literature to introduce basic concepts in machine learning. It is important to note that seemingly large enough medical data sets and adequate learning algorithms have been available for many decades, and yet, although there are thousands of papers applying machine learning algorithms to medical data, very few have contributed meaningfully to clinical care. This lack of impact stands in stark contrast to the enormous relevance of machine learning to many other industries. Thus, part of my effort will be to identify what obstacles there may be to changing the practice of medicine through statistical learning approaches, and discuss how these might be overcome.

  16. Behind the machines

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    One of the first things we think about when someone mentions physics is the machines. But behind the machines, there are the men and women who design, build and operate them. In an exhibition at the Thinktank planetarium’s art gallery in Birmingham (UK), Claudia Marcelloni and her husband Neal Hartman—she is a photographer and Outreach Officer for ATLAS, while he is an engineer working on the ATLAS pixel detector—explore the human side of scientists.   The exhibition at the Thinktank Planetarium art gallery, Birmingham (UK). It all began two years ago with the publication of Exploring the mystery of matter, a book about ATLAS. “A Norwegian physicist friend, Heidi Sandaker, saw my photographs and suggested that I display them in a museum. I thought this was an interesting idea, except that the photos consisted entirely of depictions of machinery, with human beings completely absent. For me, showing the people who are behind the machines and the fascination ...

  17. An exploratory study of the relationship between store image, trust ...

    African Journals Online (AJOL)

    2011-08-26

    Aug 26, 2011 ... between management and frontline employees in franchise stores (Ganesan 1994). ... shows that franchise stores have more informal customer service policies and trust ..... 'Building customer relations over the internet',.

  18. Silent store detection and recording in memory storage

    Energy Technology Data Exchange (ETDEWEB)

    Bose, Pradip; Cher, Chen-Yong; Nair, Ravi

    2017-03-07

    An aspect includes receiving a write request that includes a memory address and write data. Stored data is read from a memory location at the memory address. Based on determining that the memory location was not previously modified, the stored data is compared to the write data. Based on the stored data matching the write data, the write request is completed without writing the write data to the memory and a corresponding silent store bit, in a silent store bitmap is set. Based on the stored data not matching the write data, the write data is written to the memory location, the silent store bit is reset and a corresponding modified bit is set. At least one of an application and an operating system is provided access to the silent store bitmap.

  19. Silent store detection and recording in memory storage

    Energy Technology Data Exchange (ETDEWEB)

    Bose, Pradip; Cher, Chen-Yong; Nair, Ravi

    2017-03-14

    An aspect includes receiving a write request that includes a memory address and write data. Stored data is read from a memory location at the memory address. Based on determining that the memory location was not previously modified, the stored data is compared to the write data. Based on the stored data matching the write data, the write request is completed without writing the write data to the memory and a corresponding silent store bit, in a silent store bitmap is set. Based on the stored data not matching the write data, the write data is written to the memory location, the silent store bit is reset and a corresponding modified bit is set. At least one of an application and an operating system is provided access to the silent store bitmap.

  20. Silent store detection and recording in memory storage

    Science.gov (United States)

    Bose, Pradip; Cher, Chen-Yong; Nair, Ravi

    2016-09-20

    An aspect includes receiving a write request that includes a memory address and write data. Stored data is read from a memory location at the memory address. Based on determining that the memory location was not previously modified, the stored data is compared to the write data. Based on the stored data matching the write data, the write request is completed without writing the write data to the memory and a corresponding silent store bit, in a silent store bitmap is set. Based on the stored data not matching the write data, the write data is written to the memory location, the silent store bit is reset and a corresponding modified bit is set. At least one of an application and an operating system is provided access to the silent store bitmap.

  1. Soft computing in machine learning

    CERN Document Server

    Park, Jooyoung; Inoue, Atsushi

    2014-01-01

    As users or consumers are now demanding smarter devices, intelligent systems are revolutionizing by utilizing machine learning. Machine learning as part of intelligent systems is already one of the most critical components in everyday tools ranging from search engines and credit card fraud detection to stock market analysis. You can train machines to perform some things, so that they can automatically detect, diagnose, and solve a variety of problems. The intelligent systems have made rapid progress in developing the state of the art in machine learning based on smart and deep perception. Using machine learning, the intelligent systems make widely applications in automated speech recognition, natural language processing, medical diagnosis, bioinformatics, and robot locomotion. This book aims at introducing how to treat a substantial amount of data, to teach machines and to improve decision making models. And this book specializes in the developments of advanced intelligent systems through machine learning. It...

  2. Machine Translation Effect on Communication

    DEFF Research Database (Denmark)

    Jensen, Mika Yasuoka; Bjørn, Pernille

    2011-01-01

    Intercultural collaboration facilitated by machine translation has gradually spread in various settings. Still, little is known as for the practice of machine-translation mediated communication. This paper investigates how machine translation affects intercultural communication in practice. Based...... determines communication process largely, our data indicates communication relies more on a dynamic process where participants establish common ground than on reproducibility and grammatical accuracy.......Intercultural collaboration facilitated by machine translation has gradually spread in various settings. Still, little is known as for the practice of machine-translation mediated communication. This paper investigates how machine translation affects intercultural communication in practice. Based...... on communication in which multilingual communication system is applied, we identify four communication types and its’ influences on stakeholders’ communication process, especially focusing on establishment and maintenance of common ground. Different from our expectation that quality of machine translation results...

  3. Specific energy consumption values for various refrigerated food cold stores

    OpenAIRE

    Evans, JA; Foster, AM; Huet, JM; Reinholdt, L.; Fikiin, K; Zilio, C; Houska, M; Landfeld, A; Bond, C.; Scheurs, M; Van Sambeeck, TWM

    2013-01-01

    Two benchmarking surveys were created to collect data on the performance of chilled, frozen and mixed (chilled and frozen stores operated from a single refrigeration system) food cold stores with the aim of identifying the major factors influencing energy consumption. The volume of the cold store was found to have the greatest relationship with energy use with none of the other factors collected having any significant impact on energy use. For chilled cold stores, 93% of the variation in ener...

  4. Who Needs to Fit In? Who Gets to Stand Out? Communication Technologies Including Brain-Machine Interfaces Revealed from the Perspectives of Special Education School Teachers through an Ableism Lens

    Science.gov (United States)

    Diep, Lucy; Wolbring, Gregor

    2013-01-01

    Some new and envisioned technologies such as brain machine interfaces (BMI) that are being developed initially for people with disabilities, but whose use can also be expanded to the general public have the potential to change body ability expectations of disabled and non-disabled people beyond the species-typical. The ways in which this dynamic…

  5. Fracture Toughness of Nanohybrid and Hybrid Composites Stored Wet and Dry up to 60 Days

    Directory of Open Access Journals (Sweden)

    Sookhakiyan M

    2017-03-01

    Full Text Available Statement of Problem: Patients’ demand for tooth-colored restoratives in the posterior region is increasing. Clinicians use universal nanohybrid resin composites for both anterior and posterior regions. There are few published reports comparing fracture toughness of nonohybrids and that of hybrid composite stored wet and dry. Objectives: To investigate the fracture toughness of three nanohybrids compared to that of a hybrid resin composite stored dry or wet up to 60 days, using four- point bending test. Materials and Methods: Four resin composites were used: three nanohybrids; Filtek Supreme (3M, Ice (SDI, TPH3 (Dentsply and one hybrid Filtek P60 (3M. For each material, 40 rectangular notched beam specimens were prepared with dimensions of 30 mm × 5mm × 2mm. The specimens were randomly divided into 4 groups (n = 10 and stored at 37ºC either in distilled water or dry for 1 and 60 days. The specimens were placed on the four-point test jig and subjected to force (N using universal testing machine loaded at a crosshead speed of 0.5mm/min and maximum load at specimen failure was recorded and KIc was calculated. Results: Three-way ANOVA showed a significant interaction between all the factors (all p < .0001. Except for TPH3, all tested materials showed significantly higher KIc when stored dry than stored wet (p < 0.05. After 1 day of dry storage, Ice showed the highest KIc (2.04 ± 0.32 followed by Filtek P60 and the lowest was for Filtek Supreme (1.39 ± 0.13. The effect of time on fracture toughness was material dependent. Conclusions: Wet storage adversely affected the fracture toughness of almost all materials. Keeping the restoration dry in the mouth may increase their fracture toughness. Therefore, using a coating agent on the surface of restoration may protect them from early water uptake and increase their strength during a time period.

  6. Machine Protection Challenges for HL-LHC

    CERN Document Server

    Schmidt, R; Wenninger, J; Wollmann, D; Zerlauth, M

    2014-01-01

    LHC operation requires the flawless functioning of the machine protection systems. The energy stored in the beam was progressively increased beyond the 140 MJ range at the end of 2012 at 4 TeV/c. The further increase to more than 300 MJ expected for 2015 at 6.5 TeV/c should be possible with the existing protection systems. For HL-LHC additional failure modes need to be considered. The stored beam energy will increase by another factor of two with respect to nominal and a factor of five more than experienced so far. The maximum beta function in the high luminosity insertion regions will increase. It is planned to install crab cavities in the LHC to compensate for the loss in luminosity due to the crossing-angle. With crab cavities, sudden voltage decays within 100 µs after e.g. cavity quenches can lead to large transverse beam oscillations. Tracking simulations predict trajectory distortions of up to 1.5 σ after a sudden drop of the deflecting voltage in a single cavity. Protons in the halo with an energy of...

  7. In-Store Experimental Approach to Pricing and Consumer Behavior

    Science.gov (United States)

    Sigurdsson, Valdimar; Foxall, Gordon; Saevarsson, Hugi

    2010-01-01

    This study assessed how, and to what extent, it is possible to use behavioral experimentation and relative sales analysis to study the effects of price on consumers' brand choices in the store environment. An in-store experiment was performed in four stores to investigate the effects of different prices of a target brand on consumers' relative…

  8. In-Store Experimental Approach to Pricing and Consumer Behavior

    Science.gov (United States)

    Sigurdsson, Valdimar; Foxall, Gordon; Saevarsson, Hugi

    2010-01-01

    This study assessed how, and to what extent, it is possible to use behavioral experimentation and relative sales analysis to study the effects of price on consumers' brand choices in the store environment. An in-store experiment was performed in four stores to investigate the effects of different prices of a target brand on consumers' relative…

  9. Nonjudicious dispensing of antibiotics by drug stores in Pratumthani, Thailand.

    Science.gov (United States)

    Apisarnthanarak, Anucha; Tunpornchai, Jeeraluk; Tanawitt, Korakot; Mundy, Linda M

    2008-06-01

    Mock patient presentations of 6 common syndromic ailments to drug stores in Pratumthani, Thailand, were conducted. Appropriate dispensing of antibiotic therapy for all 6 presentations occurred at 56 (20%) of 280 drug stores. By multivariate analysis, drug stores' proximity to a hospital was associated with appropriate dispensing of antibiotics (adjusted odds ratio, 34 [95% confidence interval, 15-83]; P < .001).

  10. Mobning som sundhedstrussel blandt store skoleelever

    DEFF Research Database (Denmark)

    Due, Pernille; Holstein, Bjørn Evald; Jørgensen, Per Schultz

    1999-01-01

    . Bullying was associated with low social class. Bullying varied considerably among schools. The victims had more problems as regards health, well-being and self-esteem; they smoked and drank less than others. Those who bullied others also had more problems but to a much smaller extent than the victims....... They had higher levels of risk behaviours such as smoking, drinking, and seat-belt avoidance, and were less satisfied with school. In conclusion, victims of bullying have a very high proportion of health problems, poor well-being and low self-esteem. To bully others is significantly associated with health...

  11. Light-powered molecular devices and machines.

    Science.gov (United States)

    Ceroni, Paola; Credi, Alberto; Venturi, Margherita; Balzani, Vincenzo

    2010-12-01

    One century ago Giacomo Ciamician predicted that photochemistry would have had a wealth of useful applications, starting from the conversion of solar energy into fuels. Most of Ciamician's predictions have not yet been achieved, but in the last decade outstanding progress concerning the interaction between light and molecules has led to the creation of artificial photochemical molecular devices and machines capable of using light as an energy supply (to sustain energy-expensive functions) or as an input signal (to be processed and/or stored). This paper illustrates (i) the principles of photochemical molecular devices for information processing, with a few examples of memories, logic functions, and encoding/decoding systems; (ii) the operational mechanisms of light-powered molecular machines, with some examples of rotary motors, shuttles, valves, and switchable boxes; and (iii) the recent progress made in the design and construction of the components of artificial photosynthetic systems. The use of photons to convert abundant low energy molecules into high energy valuable compounds, and to read, write, and erase smart molecular and supramolecular systems for information processing is likely to play a fundamental role for the progress of mankind.

  12. Obesogenic neighbourhoods: the impact of neighbourhood restaurants and convenience stores on adolescents' food consumption behaviours.

    Science.gov (United States)

    He, Meizi; Tucker, Patricia; Irwin, Jennifer D; Gilliland, Jason; Larsen, Kristian; Hess, Paul

    2012-12-01

    To examine the relationship between the neighbourhood food environment and dietary intake among adolescents. Cross-sectional design using: (i) a geographic information system to assess characteristics of the neighbourhood food environment and neighbourhood socio-economic status; (ii) the modified Healthy Eating Index (HEI) to assess participants' overall diet quality; and (iii) generalized linear models to examine associations between HEI and home and school food environmental correlates. Mid-sized Canadian city in Ontario, Canada. Participants Grade 7 and 8 students (n 810) at twenty-one elementary schools. Students living in neighbourhoods with a lower diversity of land-use types, compared with their higher diversity counterparts, had higher HEI scores (P store had higher HEI scores than those living within 1 km (P store (P proximity to convenience stores in adolescents' home environments is associated with low HEI scores. Within adolescents' school environments, close proximity to convenience and fast-food outlets and a high density of fast-food outlets are associated with low HEI scores.

  13. nuSTORM: Neutrinos from STORed Muons

    CERN Document Server

    Kyberd, P; Coney, L; Pascoli, S; Ankenbrandt, C; Brice, S J; Bross, A D; Cease, H; Kopp, J; Mokhov, N; Morfin, J; Neuffer, D; Popovic, M; Rubinov, P; Striganov, S; Blondel, A; Bravar, A; Noah, E; Bayes, R; Soler, F J P; Dobbs, A; Long, K; Pasternak, J; Santos, E; Wascko, M O; Agarwalla, S K; Bogacz, S A; Mori, Y; Lagrange, J B; de Gouvêa, A; Kuno, Y; Sato, A; Blackmore, V; Cobb, J; Tunnell, C D; Link, J M; Huber, P; Winter, W

    2012-01-01

    The results of LSND and MiniBooNE, along with the recent papers on a possible reactor neutrino flux anomaly give tantalizing hints of new physics. Models beyond the neutrino-SM have been developed to explain these results and involve one or more additional neutrinos that are non-interacting or "sterile." Neutrino beams produced from the decay of muons in a racetrack-like decay ring provide a powerful way to study this potential new physics. In this Letter of Intent, we describe a facility, nuSTORM, "Neutrinos from STORed Muons," and an appropriate far detector for neutrino oscillation searches at short baseline. We present sensitivity plots that indicated that this experimental approach can provide over 10 sigma confirmation or rejection of the LSND/MinBooNE results. In addition we indicate how the facility can be used to make precision neutrino interaction cross section measurements important to the next generation of long-baseline neutrino oscillation experiments.

  14. Store-operated calcium signaling in neutrophils.

    Science.gov (United States)

    Clemens, Regina A; Lowell, Clifford A

    2015-10-01

    Calcium signals in neutrophils are initiated by a variety of cell-surface receptors, including formyl peptide and other GPCRs, FcRs, and integrins. The predominant pathway by which calcium enters immune cells is termed SOCE, whereby plasma membrane CRAC channels allow influx of extracellular calcium into the cytoplasm when intracellular ER stores are depleted. The identification of 2 key families of SOCE regulators, STIM calcium "sensors" and ORAI calcium channels, has allowed for genetic manipulation of SOCE pathways and provided valuable insight into the molecular mechanism of calcium signaling in immune cells, including neutrophils. This review focuses on our current knowledge of the molecules involved in neutrophil SOCE and how study of these molecules has further informed our understanding of the role of calcium signaling in neutrophil activation.

  15. Nudging consumer behaviour in retail stores

    DEFF Research Database (Denmark)

    Adam, Abdulfatah

    2016-01-01

    stores. However, this is achieved at the expense of somewhat lowered revenue from sales. There are several implications of this study. First, supermarkets may not have an incentive to change current marketing practices as their top priority is their own welfare. Secondly, while the reduction in revenues......The rise of obesity and overweight is a global health challenge. Obesity is a complex phenomenon that can be attributed to multiple factors. One of these factors is the food environment, and particularly the food retailers. This study is part of a big project that aims to evaluate cost...... directly affects only the retail sector, the benefits of calorie reduction are a welfare gain to society. The next question is then whether society should compensate supermarkets for giving more focus on healthy foods. But before any general welfare recommendations are made, the cost...

  16. Chain store management through private labels strategy

    Directory of Open Access Journals (Sweden)

    Martina Sopta

    2007-07-01

    Full Text Available The purpose of this paper is to examine the market shares of private labels in the European Union and on the global market, and to compare the results of the analysis with the level of presence of private labels on the Croatian market. Moreover, through the application of macro and microeconomic tools, the author tried to estimate the future trends of private labels in Croatia.For the purpose of the paper secondary and primary data was used in the research. Relevant scientific and professional literature of local and foreign authors was analyzed. In addition, a few recent research studies were analyzed and their results compared. Field research has been conducted by the survey method, with 225 respondents included in the intentional sample.The main hypothesis of the paper based on research is that, in total sales, private labels are gaining a growing share in all markets, regardless of the development level of those markets. Alongside the main hypothesis of the work, three supporting hypotheses were tested to see which private labels are a good alternative to other brands on the world market. Private labels are generally developed on generic products. The third supporting hypothesis starts from the assumption that the investments in the promotion of private labels are negligible, resulting in lower prices of thoseproducts. The results of research and analyses in the work indicate that the position of private labels will strengthen internationally, as part of the process of liberalization and globalization of trade flows. In the process of purchase of private labels the positioning of the point of sale and price have an increasing contribution. With the concentration of commerce in chain stores, the share of private labels grows, approaching a half of the total sales in some countries. Considering the Croatian market, according to the international product life cycle theory, the share of private labels in the total sales will grow in the future

  17. 4S Store to Face Watershed

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Mr. Xue Xu, a famous professor from the School of Economics of Beijing University and a well-known corporate strategy and marketing expert, recently commented that the strengthening of brands under the wing of international automakers are destined to weaken the sales of their joint ventures.

  18. Mineral mining machines

    Energy Technology Data Exchange (ETDEWEB)

    Mc Gaw, B.H.

    1984-01-01

    A machine for mining minerals is patented. It is a cutter loader with a drum actuating element of the worm type equipped with a multitude of cutting teeth reinforced with tungsten carbide. A feature of the patented machine is that all of the cutting teeth and holders on the drum have the identical design. This is achieved through selecting a slant angle for the cutting teeth which is the mean between the slant angle of the conventional radial teeth and the slant angle of the advance teeth. This, in turn, is provided thanks to the corresponding slant of the holders relative to the drum and (or) the slant of the cutting part of the teeth relative to their stems. Thus, the advance teeth projecting beyond the surface of the drum on the face side and providing upper and lateral clearances have the same angle of attack as the radial teeth, that is, from 20 to 35 degrees. A series of modifications of the cutting teeth is patented. One of the designs allows the cutting tooth to occupy a varying position relative to the drum, from the conventional vertical to an inverted, axially projecting position. In the last case the tooth in the extraction process provides the upper and lateral clearances for the drum on the face side. Among the different modifications of the cutting teeth, a design is proposed which provides for the presence of a stem which is shaped like a truncated cone. This particular stem is designed for use jointly with a wedge which unfastens the teeth and is placed in a holder. The latter is completed in a transverse slot thanks to which the rear end of the stem is compressed, which simplifies replacement of a tooth. Channels are provided in the patented machine for feeding water to the worm spiral, the holders and the cutting teeth themselves in order to deal with dust.

  19. Advanced Machine learning Algorithm Application for Rotating Machine Health Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Kanemoto, Shigeru; Watanabe, Masaya [The University of Aizu, Aizuwakamatsu (Japan); Yusa, Noritaka [Tohoku University, Sendai (Japan)

    2014-08-15

    The present paper tries to evaluate the applicability of conventional sound analysis techniques and modern machine learning algorithms to rotating machine health monitoring. These techniques include support vector machine, deep leaning neural network, etc. The inner ring defect and misalignment anomaly sound data measured by a rotating machine mockup test facility are used to verify the above various kinds of algorithms. Although we cannot find remarkable difference of anomaly discrimination performance, some methods give us the very interesting eigen patterns corresponding to normal and abnormal states. These results will be useful for future more sensitive and robust anomaly monitoring technology.

  20. Tribology in machine design

    CERN Document Server

    Stolarski, T A

    1990-01-01

    Tribology in Machine Design aims to promote a better appreciation of the increasingly important role played by tribology at the design stage in engineering. This book shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications. The concept of tribodesign is introduced in Chapter 1. Chapter 2 is devoted to a brief discussion of the basic principles of tribology, including some concepts and models of lubricated wear and friction under complex kinematic conditions. Elements of contact mechanics, presented in Chapter 3, are confined to the

  1. Quantum adiabatic machine learning

    CERN Document Server

    Pudenz, Kristen L

    2011-01-01

    We develop an approach to machine learning and anomaly detection via quantum adiabatic evolution. In the training phase we identify an optimal set of weak classifiers, to form a single strong classifier. In the testing phase we adiabatically evolve one or more strong classifiers on a superposition of inputs in order to find certain anomalous elements in the classification space. Both the training and testing phases are executed via quantum adiabatic evolution. We apply and illustrate this approach in detail to the problem of software verification and validation.

  2. Daphne machine project

    Energy Technology Data Exchange (ETDEWEB)

    Vignola, G. and Daphne Project Team [Istituto Nazionale di Fisica Nucleare, Frascati (Italy)

    1996-07-01

    Daphne, a high luminosity e{sup +}/e{sup -} {Phi} factory, is presently under construction in Frascati. The beginning of the collider commissioning is scheduled by winter 1997, with a short term luminosity goal L=1.3 10{sup 32} cm{sup -2} sec{sup -1}. Daphne shall be the first of the new generation of very high luminosity colliders, called factories, to come in operation. Other factories under construction are PEP-II and KEK-B: first collision, for both machines, is planned for 1998.

  3. CENTRIFUGAL CASTING MACHINE

    Science.gov (United States)

    Shuck, A.B.

    1958-04-01

    A device is described that is specifically designed to cast uraniumn fuel rods in a vacuunn, in order to obtain flawless, nonoxidized castings which subsequently require a maximum of machining or wastage of the expensive processed material. A chamber surrounded with heating elements is connected to the molds, and the entire apparatus is housed in an airtight container. A charge of uranium is placed in the chamber, heated, then is allowed to flow into the molds While being rotated. Water circulating through passages in the molds chills the casting to form a fine grained fuel rod in nearly finished form.

  4. Electrical machines with Matlab

    CERN Document Server

    Gonen, Turan

    2011-01-01

    Basic ConceptsDistribution SystemImpact of Dispersed Storage and GenerationBrief Overview of Basic Electrical MachinesReal and Reactive Powers in Single-Phase AC CircuitsThree-Phase CircuitsThree-Phase SystemsUnbalanced Three-Phase LoadsMeasurement of Average Power in Three-Phase CircuitsPower Factor CorrectionMagnetic CircuitsMagnetic Field of Current-Carrying ConductorsAmpère's Magnetic Circuital LawMagnetic CircuitsMagnetic Circuit with Air GapBrief Review of FerromagnetismMagnetic Core LossesHow to Determine Flux for a Given MMFPermanent MagnetsTransformersTransformer ConstructionBrief Rev

  5. Convenience stores are the key food environment influence on nutrients available from household food supplies in Texas Border Colonias

    Directory of Open Access Journals (Sweden)

    Sharkey Joseph R

    2013-01-01

    fat. Participation in the National School Lunch Program (NSLP was associated with lower household levels of total energy, calcium, vitamin C, sodium, vitamin D, and saturated fat. Spatial access and utilization of supermarkets and dollar stores were not associated with nutrient availability. Conclusions Although household members frequently purchased food items from supermarkets or dollar stores, it was spatial access to and frequent utilization of convenience food stores that influenced the amount of nutrients present in Texas border colonia households. These findings also suggest that households which participate in NSLP have reduced AE-adjusted nutrients available in the home. The next step will target changes within convenience stores to improve in-store marketing of foods and beverages to children and adults.

  6. Machining of Complex Sculptured Surfaces

    CERN Document Server

    2012-01-01

    The machining of complex sculptured surfaces is a global technological topic in modern manufacturing with relevance in both industrialized and emerging in countries particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with  high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ra...

  7. Learning thermodynamics with Boltzmann machines

    Science.gov (United States)

    Torlai, Giacomo; Melko, Roger G.

    2016-10-01

    A Boltzmann machine is a stochastic neural network that has been extensively used in the layers of deep architectures for modern machine learning applications. In this paper, we develop a Boltzmann machine that is capable of modeling thermodynamic observables for physical systems in thermal equilibrium. Through unsupervised learning, we train the Boltzmann machine on data sets constructed with spin configurations importance sampled from the partition function of an Ising Hamiltonian at different temperatures using Monte Carlo (MC) methods. The trained Boltzmann machine is then used to generate spin states, for which we compare thermodynamic observables to those computed by direct MC sampling. We demonstrate that the Boltzmann machine can faithfully reproduce the observables of the physical system. Further, we observe that the number of neurons required to obtain accurate results increases as the system is brought close to criticality.

  8. Machine learning with R cookbook

    CERN Document Server

    Chiu, Yu-Wei

    2015-01-01

    If you want to learn how to use R for machine learning and gain insights from your data, then this book is ideal for you. Regardless of your level of experience, this book covers the basics of applying R to machine learning through to advanced techniques. While it is helpful if you are familiar with basic programming or machine learning concepts, you do not require prior experience to benefit from this book.

  9. Machine learning in healthcare informatics

    CERN Document Server

    Acharya, U; Dua, Prerna

    2014-01-01

    The book is a unique effort to represent a variety of techniques designed to represent, enhance, and empower multi-disciplinary and multi-institutional machine learning research in healthcare informatics. The book provides a unique compendium of current and emerging machine learning paradigms for healthcare informatics and reflects the diversity, complexity and the depth and breath of this multi-disciplinary area. The integrated, panoramic view of data and machine learning techniques can provide an opportunity for novel clinical insights and discoveries.

  10. Autocoding State Machine in Erlang

    DEFF Research Database (Denmark)

    Guo, Yu; Hoffman, Torben; Gunder, Nicholas

    2008-01-01

    This paper presents an autocoding tool suit, which supports development of state machine in a model-driven fashion, where models are central to all phases of the development process. The tool suit, which is built on the Eclipse platform, provides facilities for the graphical specification...... of a state machine model. Once the state machine is specified, it is used as input to a code generation engine that generates source code in Erlang....

  11. Stacked Extreme Learning Machines.

    Science.gov (United States)

    Zhou, Hongming; Huang, Guang-Bin; Lin, Zhiping; Wang, Han; Soh, Yeng Chai

    2015-09-01

    Extreme learning machine (ELM) has recently attracted many researchers' interest due to its very fast learning speed, good generalization ability, and ease of implementation. It provides a unified solution that can be used directly to solve regression, binary, and multiclass classification problems. In this paper, we propose a stacked ELMs (S-ELMs) that is specially designed for solving large and complex data problems. The S-ELMs divides a single large ELM network into multiple stacked small ELMs which are serially connected. The S-ELMs can approximate a very large ELM network with small memory requirement. To further improve the testing accuracy on big data problems, the ELM autoencoder can be implemented during each iteration of the S-ELMs algorithm. The simulation results show that the S-ELMs even with random hidden nodes can achieve similar testing accuracy to support vector machine (SVM) while having low memory requirements. With the help of ELM autoencoder, the S-ELMs can achieve much better testing accuracy than SVM and slightly better accuracy than deep belief network (DBN) with much faster training speed.

  12. Interaction with Machine Improvisation

    Science.gov (United States)

    Assayag, Gerard; Bloch, George; Cont, Arshia; Dubnov, Shlomo

    We describe two multi-agent architectures for an improvisation oriented musician-machine interaction systems that learn in real time from human performers. The improvisation kernel is based on sequence modeling and statistical learning. We present two frameworks of interaction with this kernel. In the first, the stylistic interaction is guided by a human operator in front of an interactive computer environment. In the second framework, the stylistic interaction is delegated to machine intelligence and therefore, knowledge propagation and decision are taken care of by the computer alone. The first framework involves a hybrid architecture using two popular composition/performance environments, Max and OpenMusic, that are put to work and communicate together, each one handling the process at a different time/memory scale. The second framework shares the same representational schemes with the first but uses an Active Learning architecture based on collaborative, competitive and memory-based learning to handle stylistic interactions. Both systems are capable of processing real-time audio/video as well as MIDI. After discussing the general cognitive background of improvisation practices, the statistical modelling tools and the concurrent agent architecture are presented. Then, an Active Learning scheme is described and considered in terms of using different improvisation regimes for improvisation planning. Finally, we provide more details about the different system implementations and describe several performances with the system.

  13. Vector control of induction machines

    CERN Document Server

    Robyns, Benoit

    2012-01-01

    After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, ""Vector Control of Induction Machines"" introduces the standard mathematical models for induction machines - whichever rotor technology is used - as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. ""Vector Control of Induction Machines"" suggests a unique approach aimed at reducing parameter sensitivity for

  14. Beam Transfer and Machine Protection

    CERN Document Server

    Kain, V

    2016-01-01

    Beam transfer, such as injection into or extraction from an accelerator, is one of the most critical moments in terms of machine protection in a high-intensity machine. Special equipment is used and machine protection aspects have to be taken into account in the design of the beam transfer concepts. A brief introduction of the principles of beam transfer and the equipment involved will be given in this lecture. The main concepts of machine protection for injection and extraction will be presented, with examples from the CERN SPS and LHC.

  15. Turing Automata and Graph Machines

    Directory of Open Access Journals (Sweden)

    Miklós Bartha

    2010-06-01

    Full Text Available Indexed monoidal algebras are introduced as an equivalent structure for self-dual compact closed categories, and a coherence theorem is proved for the category of such algebras. Turing automata and Turing graph machines are defined by generalizing the classical Turing machine concept, so that the collection of such machines becomes an indexed monoidal algebra. On the analogy of the von Neumann data-flow computer architecture, Turing graph machines are proposed as potentially reversible low-level universal computational devices, and a truly reversible molecular size hardware model is presented as an example.

  16. Influence of Oxidative Stress on Stored Platelets

    Directory of Open Access Journals (Sweden)

    K. Manasa

    2016-01-01

    Full Text Available Platelet storage and its availability for transfusion are limited to 5-6 days. Oxidative stress (OS is one of the causes for reduced efficacy and shelf-life of platelets. The studies on platelet storage have focused on improving the storage conditions by altering platelet storage solutions, temperature, and materials. Nevertheless, the role of OS on platelet survival during storage is still unclear. Hence, this study was conducted to investigate the influence of storage on platelets. Platelets were stored for 12 days at 22°C. OS markers such as aggregation, superoxides, reactive oxygen species, glucose, pH, lipid peroxidation, protein oxidation, and antioxidant enzymes were assessed. OS increased during storage as indicated by increments in aggregation, superoxides, pH, conjugate dienes, and superoxide dismutase and decrements in glucose and catalase. Thus, platelets could endure OS till 6 days during storage, due to the antioxidant defense system. An evident increase in OS was observed from day 8 of storage, which can diminish the platelet efficacy. The present study provides an insight into the gradual changes occurring during platelet storage. This lays the foundation towards new possibilities of employing various antioxidants as additives in storage solutions.

  17. Storing Quantum Information via Atomic Dark Resonances

    CERN Document Server

    Caruso, Filippo

    2010-01-01

    In this thesis, after a brief review of some concepts of Quantum Optics, we analyze a three-level atomic system in the conditions of electromagnetically induced transparency (EIT), and we investigate the propagation of a gaussian pulse along a cigar-shaped cloud of both cold and hot atoms in EIT regime. In particular, we show that it is possible to amplify a slow propagating pulse without population inversion. We also analyze the regime of anomalous light propagation showing that it is possible to observe superluminal energy propagation. In these conditions, it is possible to imprint reversibly ('write') the information carried by the photons onto the atoms, specifically as a coherent pattern of atomic spins, and later the information stored in the atomic spins can be transferred back ('read') to the light field, implementing in this way a quantum memory. Besides, we analyze the propagation of a quantum field in an EIT medium sustaining dark state polaritons (DSP) in a quasi-particle picture. Here, the decohe...

  18. Changes of quality of rennets during storing

    Directory of Open Access Journals (Sweden)

    Monika Kozelková

    2012-01-01

    Full Text Available This work deals about evaluation of qualitative parameters of rennets. During the six months storing of rennets were determined following qualitative parameters: pH, rennet coagulation time, activity (strange of rennet and dose of rennet, and finally were used instrumental methods: Near infrared spectroscopy (NIR for recognizing age of rennets and spectrophotometric methods of determining the color of rennets. The theory found in the references suggests, that the activity of rennet should decrease by an average of 1–2 % per month, but the results are showing, that are changing quality of rennets namely mostly activity (strange of rennet, which was decreased by 33% per half year. In analysis of color of rennets weren’t observed major changes by the whole group. Some statistical differences were detected in the partial values L*a*b*, most advantageous were evaluation by rennet total color change during storage, which were higher than noticeable change in four samples. The least color changes (P > 0.05 were observed in microbial rennets, with no values observed (ΔEab < 2 that can be recognized even by the human eye when subjected to parallel comparison. It was found that the NIR analysis can be used to recognizing of rennets, which are different ages.

  19. Storing Renewable Energy in the Hydrogen Cycle.

    Science.gov (United States)

    Züttel, Andreas; Callini, Elsa; Kato, Shunsuke; Atakli, Züleyha Özlem Kocabas

    2015-01-01

    An energy economy based on renewable energy requires massive energy storage, approx. half of the annual energy consumption. Therefore, the production of a synthetic energy carrier, e.g. hydrogen, is necessary. The hydrogen cycle, i.e. production of hydrogen from water by renewable energy, storage and use of hydrogen in fuel cells, combustion engines or turbines is a closed cycle. Electrolysis splits water into hydrogen and oxygen and represents a mature technology in the power range up to 100 kW. However, the major technological challenge is to build electrolyzers in the power range of several MW producing high purity hydrogen with a high efficiency. After the production of hydrogen, large scale and safe hydrogen storage is required. Hydrogen is stored either as a molecule or as an atom in the case of hydrides. The maximum volumetric hydrogen density of a molecular hydrogen storage is limited to the density of liquid hydrogen. In a complex hydride the hydrogen density is limited to 20 mass% and 150 kg/m(3) which corresponds to twice the density of liquid hydrogen. Current research focuses on the investigation of new storage materials based on combinations of complex hydrides with amides and the understanding of the hydrogen sorption mechanism in order to better control the reaction for the hydrogen storage applications.

  20. Production Machine Shop Employment Competencies. Part Four: The Milling Machine.

    Science.gov (United States)

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the fourth of four topic areas: the milling machine. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

  1. Standardized Curriculum for Machine Tool Operation/Machine Shop.

    Science.gov (United States)

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

  2. Machine performance assessment and enhancement for a hexapod machine

    Energy Technology Data Exchange (ETDEWEB)

    Mou, J.I. [Arizona State Univ., Tempe, AZ (United States); King, C. [Sandia National Labs., Livermore, CA (United States). Integrated Manufacturing Systems Center

    1998-03-19

    The focus of this study is to develop a sensor fused process modeling and control methodology to model, assess, and then enhance the performance of a hexapod machine for precision product realization. Deterministic modeling technique was used to derive models for machine performance assessment and enhancement. Sensor fusion methodology was adopted to identify the parameters of the derived models. Empirical models and computational algorithms were also derived and implemented to model, assess, and then enhance the machine performance. The developed sensor fusion algorithms can be implemented on a PC-based open architecture controller to receive information from various sensors, assess the status of the process, determine the proper action, and deliver the command to actuators for task execution. This will enhance a hexapod machine`s capability to produce workpieces within the imposed dimensional tolerances.

  3. Theory and practice in machining systems

    CERN Document Server

    Ito, Yoshimi

    2017-01-01

    This book describes machining technology from a wider perspective by considering it within the machining space. Machining technology is one of the metal removal activities that occur at the machining point within the machining space. The machining space consists of structural configuration entities, e.g., the main spindle, the turret head and attachments such the chuck and mandrel, and also the form-generating movement of the machine tool itself. The book describes fundamental topics, including the form-generating movement of the machine tool and the important roles of the attachments, before moving on to consider the supply of raw materials into the machining space, and the discharge of swarf from it, and then machining technology itself. Building on the latest research findings “Theory and Practice in Machining System” discusses current challenges in machining. Thus, with the inclusion of introductory and advanced topics, the book can be used as a guide and survey of machining technology for students an...

  4. Report card on school snack food policies among the United States' largest school districts in 2004–2005: Room for improvement

    Directory of Open Access Journals (Sweden)

    Rivara Frederick P

    2006-01-01

    Full Text Available Abstract Background Federal nutritional guidelines apply to school foods provided through the national school lunch and breakfast programs, but few federal regulations apply to other foods and drinks sold in schools (labeled "competitive foods", which are often high in calories, fat and sugar. Competitive food policies among school districts are increasingly viewed as an important modifiable factor in the school nutrition environment, particularly to address rising rates of childhood overweight. Congress passed legislation in 2004 requiring all school districts to develop a Wellness Policy that includes nutrition guidelines for competitive foods starting in 2006–2007. In addition, the Institute of Medicine (IOM recently published recommendations for schools to address childhood obesity. Methods Representatives of school districts with the largest student enrollment in each state and D.C. (N = 51 were interviewed in October-November 2004 about each school district's nutrition policies on "competitive foods." District policies were examined and compared to the Institute of Medicine's recommendations for schools to address childhood obesity. Information about state competitive food policies was accessed via the Internet, and through state and district contacts. Results The 51 districts accounted for 5.9 million students, representing 11% of US students. Nineteen of the 51 districts (39% had competitive food policies beyond state or federal requirements. The majority of these district policies (79% were adopted since 2002. School district policies varied in scope and requirements. Ten districts (53% set different standards by grade level. Most district policies had criteria for food and beverage content (74% and prohibited the sale of soda in all schools (63%; fewer policies restricted portion size of foods (53% or beverages (47%. Restrictions more often applied to vending machines (95%, cafeteria à la carte (79%, and student stores (79% than

  5. Building a Distributed Infrastructure for Scalable Triple Stores

    Institute of Scientific and Technical Information of China (English)

    Jing Zhou; Wendy Hall; David De Roure

    2009-01-01

    Built specifically for the Semantic Web, triple stores are required to accommodate a large number of RDF triples and remain primarily centralized. As triple stores grow and evolve with time, there is a demanding need for scalable techniques to remove resource and performance bottlenecks in such systems. To this end, we propose a fully decentralized peer-to-peer architecture for large scale triple stores in which triples are maintained by individual stakeholders, and a semantics-directed search protocol, mediated by topology reorganization, for locating triples of interest. We test our design through simulations and the results show anticipated improvements over existing techniques for distributed triple stores. In addition to engineering future large scale triple stores, our work will in particular benefit the federation of stand-alone triple stores of today to achieve desired scalability.

  6. Virtual and game-inspired approaches to concept store planning

    DEFF Research Database (Denmark)

    Andreasen, Kristian Emil; Tambo, Torben

    2012-01-01

    Concept store development needs to be consistent with brand design guidelines, but also adapted to appeal to local conditions, building premises, and demographical preconditions. Visual appearance and consumer experience are assumed to be the fundamental factors. Store development processes...... will typically involve engagement from franchisers, landlord, chain management, visual merchandisers, architects and construction specialists. In this paper a system is presented and discussed for electronic modeling of concept store. The system is based on principles of computer games, gamification, to let...... for global manufacturers and brand owners who wants to roll out concept stores globally as individual stores in malls, high street or theme parks, or as shop-in-shops in department stores. Key theory applies to gamification emphasizing on personal reward systems, experience of achievement, sense...

  7. Remote pivot decoupler pylon: Wing/store flutter suppressor

    Science.gov (United States)

    Hassler, J. M., Jr. (Inventor)

    1986-01-01

    A device for suspending a store from an aerodynamic support surface, such an an aircraft wing, and more specifically, for improving upon singlet pivot decoupler pylons by reducing both frequency of active store, alignment, and alignment system space and power requirements. Two links suspend a lower pylon/rack section and releasable attached store from an upper pylon section mounted under the wing. The links allow the lower pylon section to rotate in pitch about a remote pivot point. A leaf spring connected between the lower section and electrical alignment system servomechanism provides pitch alignment of the lower section/store combination. The servomechanism utilizes an electric servomotor to drive the gear train and reversibly move the leaf spring, thereby maintaining the pitch attitude of the store within acceptable limits. The damper strokes when the lower section rotates to damp large oscillations of store.

  8. Performances of modern domestic hot-water stores

    Energy Technology Data Exchange (ETDEWEB)

    Spur, Roman [Czech Technical University in Prague (Czech Republic). Department of Environmental and Building Services, Faculty of Civil Engineering; Fiala, Dusan [Institute of Energy and Sustainable Development, De Montfort University, Leicester (United Kingdom); Nevrala, Dusan [Enplan - heating technology company, Prague (Czech Republic); Probert, Doug [Cranfield University, Bedford (United Kingdom). School of Engineering

    2006-08-15

    Several designs of domestic hot-water (DHW) store, including those with immersed heat-exchangers (HXs), are commercially available. So there is a need for a method that accurately assesses their effectivenesses. In this study, the behaviours of a novel stratified, and two standard, stores were analyzed. The TRNSYS simulation software was enhanced to simulate the functioning of those stores. The resulting mathematical model was validated using measurements obtained from experiments, which required a realistic daily DHW draw-off for testing the DHW systems. Evaluation of a user-related effectivenesses (URE) for each of the three tanks tested showed that the inner configurations of: (i) the tank and (ii) the immersed HX can significantly affect the store's performance. The stratified store was up to 32% more effective than the commonly employed commercially-available store. (author)

  9. Semantic Vector Machines

    CERN Document Server

    Vincent, Etter

    2011-01-01

    We first present our work in machine translation, during which we used aligned sentences to train a neural network to embed n-grams of different languages into an $d$-dimensional space, such that n-grams that are the translation of each other are close with respect to some metric. Good n-grams to n-grams translation results were achieved, but full sentences translation is still problematic. We realized that learning semantics of sentences and documents was the key for solving a lot of natural language processing problems, and thus moved to the second part of our work: sentence compression. We introduce a flexible neural network architecture for learning embeddings of words and sentences that extract their semantics, propose an efficient implementation in the Torch framework and present embedding results comparable to the ones obtained with classical neural language models, while being more powerful.

  10. Regularized maximum correntropy machine

    KAUST Repository

    Wang, Jim Jing-Yan

    2015-02-12

    In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.

  11. Machine Learning Exciton Dynamics

    CERN Document Server

    Häse, Florian; Pyzer-Knapp, Edward; Aspuru-Guzik, Alán

    2015-01-01

    Obtaining the exciton dynamics of large photosynthetic complexes by using mixed quantum mechanics/molecular mechanics (QM/MM) is computationally demanding. We propose a machine learning technique, multi-layer perceptrons, as a tool to reduce the time required to compute excited state energies. With this approach we predict time-dependent density functional theory (TDDFT) excited state energies of bacteriochlorophylls in the Fenna-Matthews-Olson (FMO) complex. Additionally we compute spectral densities and exciton populations from the predictions. Different methods to determine multi-layer perceptron training sets are introduced, leading to several initial data selections. In addition, we compute spectral densities and exciton populations. Once multi-layer perceptrons are trained, predicting excited state energies was found to be significantly faster than the corresponding QM/MM calculations. We showed that multi-layer perceptrons can successfully reproduce the energies of QM/MM calculations to a high degree o...

  12. Training Restricted Boltzmann Machines

    DEFF Research Database (Denmark)

    Fischer, Asja

    Restricted Boltzmann machines (RBMs) are probabilistic graphical models that can also be interpreted as stochastic neural networks. Training RBMs is known to be challenging. Computing the likelihood of the model parameters or its gradient is in general computationally intensive. Thus, training...... relies on sampling based approximations of the log-likelihood gradient. I will present an empirical and theoretical analysis of the bias of these approximations and show that the approximation error can lead to a distortion of the learning process. The bias decreases with increasing mixing rate...... of the applied sampling procedure and I will introduce a transition operator that leads to faster mixing. Finally, a different parametrisation of RBMs will be discussed that leads to better learning results and more robustness against changes in the data representation....

  13. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  14. Lean Green Machines

    Science.gov (United States)

    Villano, Matt

    2011-01-01

    Colleges and universities have been among the leaders nationwide in adopting green initiatives, partly due to their demographics, but also because they are facing their own budget pressures. Virtualization has become the poster child of many schools' efforts, because it provides significant bang for the buck. However, more and more higher…

  15. MOTION VELOCITY SMOOTH LINK IN HIGH SPEED MACHINING

    Institute of Scientific and Technical Information of China (English)

    REN Kun; FU Jianzhong; CHEN Zichen

    2007-01-01

    To deal with over-shooting and gouging in high speed machining, a novel approach for velocity smooth link is proposed. Considering discrete tool path, cubic spline curve fitting is used to find dangerous points, and according to spatial geometric properties of tool path and the kinematics theory, maximum optimal velocities at dangerous points are obtained. Based on method of velocity control characteristics stored in control system, a fast algorithm for velocity smooth link is analyzed and formulated. On-line implementation results show that the proposed approach makes velocity changing more smoothly compared with traditional velocity control methods and improves productivity greatly.

  16. A Machine Learning Based Framework for Adaptive Mobile Learning

    Science.gov (United States)

    Al-Hmouz, Ahmed; Shen, Jun; Yan, Jun

    Advances in wireless technology and handheld devices have created significant interest in mobile learning (m-learning) in recent years. Students nowadays are able to learn anywhere and at any time. Mobile learning environments must also cater for different user preferences and various devices with limited capability, where not all of the information is relevant and critical to each learning environment. To address this issue, this paper presents a framework that depicts the process of adapting learning content to satisfy individual learner characteristics by taking into consideration his/her learning style. We use a machine learning based algorithm for acquiring, representing, storing, reasoning and updating each learner acquired profile.

  17. CREDITWORTHINESS OF MACHINE BUILDING ENTERPRISES

    OpenAIRE

    Freimanis, Tālis; Svarinskis, Leonārs

    2009-01-01

    The previous research showed that the Latvian machine building enterprises experienced regular liquidity problems at the end of each year. Therefore to ensure their development the constant access to bank credits is a necessity. For that reason the analysis and evaluation of machine building enterprises creditworthiness was performed.

  18. SOLVENCY OF MACHINE BUILDING ENTERPRISES

    OpenAIRE

    Freimanis, Tālis; Svarinskis, Leonārs

    2009-01-01

    Machine building as a competative exporting industry plays an important role in the Latvian national open market economy. The further development of machine building is possible under the conditions of the stable solvency. Therefore, it is crucial to perform the solvency analysis of the industry enterprises and give its evaluation.

  19. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are

  20. Understanding and applying machine vision

    CERN Document Server

    Zeuch, Nello

    2000-01-01

    A discussion of applications of machine vision technology in the semiconductor, electronic, automotive, wood, food, pharmaceutical, printing, and container industries. It describes systems that enable projects to move forward swiftly and efficiently, and focuses on the nuances of the engineering and system integration of machine vision technology.

  1. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are th

  2. Cleaning of Free Machining Brass

    Energy Technology Data Exchange (ETDEWEB)

    Shen, T

    2005-12-29

    We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.

  3. Man and Machines: Three Criticisms.

    Science.gov (United States)

    Schneider, Edward F.

    As machines have become a more common part of daily life through the passage of time, the idea that the line separating man and machine is slowly fading has become more popular as well. This paper examines three critics of change through their most famous works. One of the most popular views of Mary Shelley's "Frankenstein" is that it is a…

  4. Anaesthesia machine: Checklist, hazards, scavenging

    Directory of Open Access Journals (Sweden)

    Umesh Goneppanavar

    2013-01-01

    Full Text Available From a simple pneumatic device of the early 20 th century, the anaesthesia machine has evolved to incorporate various mechanical, electrical and electronic components to be more appropriately called anaesthesia workstation. Modern machines have overcome many drawbacks associated with the older machines. However, addition of several mechanical, electronic and electric components has contributed to recurrence of some of the older problems such as leak or obstruction attributable to newer gadgets and development of newer problems. No single checklist can satisfactorily test the integrity and safety of all existing anaesthesia machines due to their complex nature as well as variations in design among manufacturers. Human factors have contributed to greater complications than machine faults. Therefore, better understanding of the basics of anaesthesia machine and checking each component of the machine for proper functioning prior to use is essential to minimise these hazards. Clear documentation of regular and appropriate servicing of the anaesthesia machine, its components and their satisfactory functioning following servicing and repair is also equally important. Trace anaesthetic gases polluting the theatre atmosphere can have several adverse effects on the health of theatre personnel. Therefore, safe disposal of these gases away from the workplace with efficiently functioning scavenging system is necessary. Other ways of minimising atmospheric pollution such as gas delivery equipment with negligible leaks, low flow anaesthesia, minimal leak around the airway equipment (facemask, tracheal tube, laryngeal mask airway, etc. more than 15 air changes/hour and total intravenous anaesthesia should also be considered.

  5. A multipurpose tissue bending machine.

    Science.gov (United States)

    Vesely, I; Boughner, D R

    1985-01-01

    A unique tissue bending machine was developed to test the bending properties of normal and bioprosthetic heart valve material. It can be operated in air or in a tissue bath and can measure bending torques with an accuracy in excess of 1.0 microN m. Three contrasting substances were tested to compare their stiffness and to demonstrate the machine.

  6. Self-Adjusting Teaching Machines.

    Science.gov (United States)

    Dovgyallo, A. M.

    A study was made on the synthesis of teaching machine elements to ensure the stabilization of the chi indicator of the teaching process of each student. At first, a procedure was developed for calculating the chi indicator for the case when the teaching machine predicts the magnitude of this indicator based on probabilities derived from an…

  7. Real Analytic Machines and Degrees

    CERN Document Server

    Gärtner, Tobias; 10.4204/EPTCS.24.12

    2010-01-01

    We study and compare in two degree-theoretic ways (iterated Halting oracles analogous to Kleene's arithmetical hierarchy and the Borel hierarchy of descriptive set theory) the capabilities and limitations of three models of analytic computation: BSS machines (aka real-RAM) and strongly/weakly analytic machines as introduced by Hotz et. al. (1995).

  8. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are th

  9. Anaesthesia machine: checklist, hazards, scavenging.

    Science.gov (United States)

    Goneppanavar, Umesh; Prabhu, Manjunath

    2013-09-01

    From a simple pneumatic device of the early 20(th) century, the anaesthesia machine has evolved to incorporate various mechanical, electrical and electronic components to be more appropriately called anaesthesia workstation. Modern machines have overcome many drawbacks associated with the older machines. However, addition of several mechanical, electronic and electric components has contributed to recurrence of some of the older problems such as leak or obstruction attributable to newer gadgets and development of newer problems. No single checklist can satisfactorily test the integrity and safety of all existing anaesthesia machines due to their complex nature as well as variations in design among manufacturers. Human factors have contributed to greater complications than machine faults. Therefore, better understanding of the basics of anaesthesia machine and checking each component of the machine for proper functioning prior to use is essential to minimise these hazards. Clear documentation of regular and appropriate servicing of the anaesthesia machine, its components and their satisfactory functioning following servicing and repair is also equally important. Trace anaesthetic gases polluting the theatre atmosphere can have several adverse effects on the health of theatre personnel. Therefore, safe disposal of these gases away from the workplace with efficiently functioning scavenging system is necessary. Other ways of minimising atmospheric pollution such as gas delivery equipment with negligible leaks, low flow anaesthesia, minimal leak around the airway equipment (facemask, tracheal tube, laryngeal mask airway, etc.) more than 15 air changes/hour and total intravenous anaesthesia should also be considered.

  10. Computerized Machine for Cutting Space Shuttle Thermal Tiles

    Science.gov (United States)

    Ramirez, Luis E.; Reuter, Lisa A.

    2009-01-01

    A report presents the concept of a machine aboard the space shuttle that would cut oversized thermal-tile blanks to precise sizes and shapes needed to replace tiles that were damaged or lost during ascent to orbit. The machine would include a computer-controlled jigsaw enclosed in a clear acrylic shell that would prevent escape of cutting debris. A vacuum motor would collect the debris into a reservoir and would hold a tile blank securely in place. A database stored in the computer would contain the unique shape and dimensions of every tile. Once a broken or missing tile was identified, its identification number would be entered into the computer, wherein the cutting pattern associated with that number would be retrieved from the database. A tile blank would be locked into a crib in the machine, the shell would be closed (proximity sensors would prevent activation of the machine while the shell was open), and a "cut" command would be sent from the computer. A blade would be moved around the crib like a plotter, cutting the tile to the required size and shape. Once the tile was cut, an astronaut would take a space walk for installation.

  11. Plasma disruption prediction using machine learning methods: DIII-D

    Science.gov (United States)

    Lupin-Jimenez, L.; Kolemen, E.; Eldon, D.; Eidietis, N.

    2016-10-01

    Plasma disruption prediction is becoming more important with the development of larger tokamaks, due to the larger amount of thermal and magnetic energy that can be stored. By accurately predicting an impending disruption, the disruption's impact can be mitigated or, better, prevented. Recent approaches to disruption prediction have been through implementation of machine learning methods, which characterize raw and processed diagnostic data to develop accurate prediction models. Using disruption trials from the DIII-D database, the effectiveness of different machine learning methods are characterized. Developed real time disruption prediction approaches are focused on tearing and locking modes. Machine learning methods used include random forests, multilayer perceptrons, and traditional regression analysis. The algorithms are trained with data within short time frames, and whether or not a disruption occurs within the time window after the end of the frame. Initial results from the machine learning algorithms will be presented. Work supported by US DOE under the Science Undergraduate Laboratory Internship (SULI) program, DE-FC02-04ER54698, and DE-AC02-09CH11466.

  12. Bionic machines and systems

    Energy Technology Data Exchange (ETDEWEB)

    Halme, A.; Paanajaervi, J. (eds.)

    2004-07-01

    Introduction Biological systems form a versatile and complex entirety on our planet. One evolutionary branch of primates, called humans, has created an extraordinary skill, called technology, by the aid of which it nowadays dominate life on the planet. Humans use technology for producing and harvesting food, healthcare and reproduction, increasing their capability to commute and communicate, defending their territory etc., and to develop more technology. As a result of this, humans have become much technology dependent, so that they have been forced to form a specialized class of humans, called engineers, who take care of the knowledge of technology developing it further and transferring it to later generations. Until now, technology has been relatively independent from biology, although some of its branches, e.g. biotechnology and biomedical engineering, have traditionally been in close contact with it. There exist, however, an increasing interest to expand the interface between technology and biology either by directly utilizing biological processes or materials by combining them with 'dead' technology, or by mimicking in technological solutions the biological innovations created by evolution. The latter theme is in focus of this report, which has been written as the proceeding of the post-graduate seminar 'Bionic Machines and Systems' held at HUT Automation Technology Laboratory in autumn 2003. The underlaying idea of the seminar was to analyze biological species by considering them as 'robotic machines' having various functional subsystems, such as for energy, motion and motion control, perception, navigation, mapping and localization. We were also interested about intelligent capabilities, such as learning and communication, and social structures like swarming behavior and its mechanisms. The word 'bionic machine' comes from the book which was among the initial material when starting our mission to the fascinating world

  13. Improving Seek Time for Column Store Using MMH Algorithm

    CERN Document Server

    Apte, Tejaswini; Goyal, Dr A K

    2012-01-01

    Hash based search has, proven excellence on large data warehouses stored in column store. Data distribution has significant impact on hash based search. To reduce impact of data distribution, we have proposed Memory Managed Hash (MMH) algorithm that uses shift XOR group for Queries and Transactions in column store. Our experiments show that MMH improves read and write throughput by 22% for TPC-H distribution.

  14. FINNISH ONLINE STORE TO RUSSIA – CASE COMPANY X

    OpenAIRE

    Hirvonen, Susanna

    2015-01-01

    The purpose of this research is to provide a framework in the context of online store usability for the case company X and other Finnish online store companies. If they decide to operate in the Russian online market, they may have a better chance to succeed due to this framework. This study is strictly focused on online store usability. The study reveals whether usability can be defined as the key issue in gaining the trust of Russian online consumers. Qualitative research methods w...

  15. ADOPTION OF ECR PRACTICES IN MINNESOTA GROCERY STORES

    OpenAIRE

    Paul F. PHUMPIU; King, Robert P.

    1997-01-01

    Efficient Consumer Response (ECR) is an industry-wide, collaborative initiative to re-engineer the grocery supply chain. This report presents findings from a study of ECR adoption in Minnesota grocery stores. Data were collected through interviews with managers of forty stores that are broadly distributed over store sizes, locations, and organizational forms. The interviews focused on business practices and technologies related to inventory management and ordering, shelf-space allocation and ...

  16. DoD Application Store: Enabling C2 Agility?

    Science.gov (United States)

    2014-06-01

    register their app in a single repository where it can be discovered, used, and composed by the warfighter. The DoD Application Store , as an Ozone...and application packages. Widget & App Stores One recent innovation, both in the technology and its operational use, is the growing...Afloat Storefront Afloat Storefront Afloat Storefront CANES ACS PRNOC Navy App Store Enterprise PoR Developer Submit Widget / Application SSC

  17. Machinability of Stellite 6 hardfacing

    Science.gov (United States)

    Benghersallah, M.; Boulanouar, L.; Le Coz, G.; Devillez, A.; Dudzinski, D.

    2010-06-01

    This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  18. Machine intelligence and signal processing

    CERN Document Server

    Vatsa, Mayank; Majumdar, Angshul; Kumar, Ajay

    2016-01-01

    This book comprises chapters on key problems in machine learning and signal processing arenas. The contents of the book are a result of a 2014 Workshop on Machine Intelligence and Signal Processing held at the Indraprastha Institute of Information Technology. Traditionally, signal processing and machine learning were considered to be separate areas of research. However in recent times the two communities are getting closer. In a very abstract fashion, signal processing is the study of operator design. The contributions of signal processing had been to device operators for restoration, compression, etc. Applied Mathematicians were more interested in operator analysis. Nowadays signal processing research is gravitating towards operator learning – instead of designing operators based on heuristics (for example wavelets), the trend is to learn these operators (for example dictionary learning). And thus, the gap between signal processing and machine learning is fast converging. The 2014 Workshop on Machine Intel...

  19. Machinability of Stellite 6 hardfacing

    Directory of Open Access Journals (Sweden)

    Dudzinski D.

    2010-06-01

    Full Text Available This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  20. Nontraditional machining processes research advances

    CERN Document Server

    2013-01-01

    Nontraditional machining employs processes that remove material by various methods involving thermal, electrical, chemical and mechanical energy or even combinations of these. Nontraditional Machining Processes covers recent research and development in techniques and processes which focus on achieving high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods. With applications to the automotive, aircraft and mould and die industries, Nontraditional Machining Processes explores different aspects and processes through dedicated chapters. The seven chapters explore recent research into a range of topics including laser assisted manufacturing, abrasive water jet milling and hybrid processes. Students and researchers will find the practical examples and new processes useful for both reference and for developing further processes. Industry professionals and materials engineers will also find Nontraditional M...

  1. An art history of machines?

    Directory of Open Access Journals (Sweden)

    Daniel Bridgman

    2016-12-01

    Full Text Available A toast offered in honor of Donald Preziosi on the cusp of his seventy-fifth birthday, this essay considers a range of machine metaphors, their art historical settings, and their implications. Addressing the mythography of Daedalus and his wonder machines in relation to art history’s machinic enterprises, an ancient art-archaeology seminar Preziosi directed at UCLA (in 1988 and the book, Rethinking Art History: Meditations on a Coy Science (1989 form the focus of my thinking about Preziosi’s work. At issue across the essay is the work of recursion, when machines make machines and in so doing create a recessive subjectivity for the maker. The essay ends with the speculation that art history’s disciplinary machinery may owe its generative strength to a perpetual need for replacement parts.

  2. The Antecedents of Store Image and Customer Satisfaction

    Directory of Open Access Journals (Sweden)

    Banu Kulter Demirgunes

    2016-01-01

    Full Text Available Definition of store image is argued to be useful if it predicts phenomena such as satisfaction, loyalty, customer retention and other attitudinal and behavioral outcomes. Previous researches show that customers are affected by the store attributes and consider them to assess perceived benefits and attitudes. One of the biggest challenges for companies is to build a positive image. Knowing the alternatives which could be used to form a positive image is an important issue. A positive image which is created in the customer’s mind about store is seen to have a strong and positive influence on satisfaction. A satisfied customer is likely to be loyal to the store. Therefore, image and customer satisfaction gain importance in the stores which aim to survive. This study focuses on store image, customer satisfaction and the relationship between them. The study primarily explains these two concepts, and then provides a literature review on the researches related with them. The study presents researches in which store image and customer satisfaction are separately discussed, thus it also shows other variables which can be influential on these concepts. Implications for both store image theory and practices are discussed. The literature review reveals that store image plays an important role in customer satisfaction.  Since most of the studies in literature are based on retail industry, in this study ‘store’ concept mostly refers to ‘retail store’.

  3. Re-thinking the store image study approach

    DEFF Research Database (Denmark)

    Hansen, Kåre

    2001-01-01

    Store image has traditionally been of interest in the Western markets. Studies of store image have also assessed the image of one or a few competing stores. This paper develops an approach to capture store images of an entire retail sector, an issue of importance when enter-ing the new emerging...... markets for example in Eastern Europe and Southeast Asia. The rele-vance of the approach was tested on the food retail sector in two Chinese cities. Two clusters with differ-ent images were identified and profiled. Implications for future research and managerial implications are developed....

  4. Ship’s Stores Automation Modernization (SSAM) - Phase I Report.

    Science.gov (United States)

    1982-05-01

    Fleet Accounting and Disbursing Center FI0o.1 Function 10 sub-function 1 GFS General Fund Survey GMO Game Machine Operator ICR Inventory Control...PERFORMERS: SSO, BSO, Food Service Officer (FSO), RSO, highest ranking Supply Officer (SO), Commanding Officer (CO) DESCRIPTION: Issues to Enlisted Dining...also counted from vending machines by the VMO and from the game machines by the GMO and turned over to the CA. The procedure is the same. The collection

  5. Microelectrical Discharge Machining: A Suitable Process for Machining Ceramics

    Directory of Open Access Journals (Sweden)

    Andreas Schubert

    2015-01-01

    Full Text Available Today ceramics are used in many industrial applications, for example, in the biomedical field, for high-temperature components or for cutting tools. This is attributed to their excellent mechanical and physical properties, as low density, high strength, and hardness or chemical resistance. However, these specific mechanical properties lead to problems regarding the postprocessing of ceramics. In particular, cutting processes require expensive tools which cause high manufacturing costs to machine ceramics. Consequently, there is a demand for alternative machining processes. Microelectrical discharge machining (micro-EDM is a thermal abrasion process which is based on electrical discharges between a tool and a workpiece. The advantages of micro-EDM are more and more in focus for ceramic machining. These advantages include the process of being a noncontact technology, an independency of material brittleness and hardness, a low impact on the material, and the achievable microstructures. This paper presents the current state of investigations regarding micro-EDM of ceramics. Beside the process principle of EDM, the used procedures for machining ceramics and insulating ceramics are described. Furthermore several machining examples are presented to demonstrate the possibilities of the micro-EDM process with regard to the machining of ceramics.

  6. Learning Control: Sense-Making, CNC Machines, and Changes in Vocational Training for Industrial Work

    Science.gov (United States)

    Berner, Boel

    2009-01-01

    The paper explores how novices in school-based vocational training make sense of computerized numerical control (CNC) machines. Based on two ethnographic studies in Swedish schools, one from the early 1980s and one from 2006, it analyses change and continuity in the cognitive, social, and emotional processes of learning how to become a machine…

  7. Learning Control: Sense-Making, CNC Machines, and Changes in Vocational Training for Industrial Work

    Science.gov (United States)

    Berner, Boel

    2009-01-01

    The paper explores how novices in school-based vocational training make sense of computerized numerical control (CNC) machines. Based on two ethnographic studies in Swedish schools, one from the early 1980s and one from 2006, it analyses change and continuity in the cognitive, social, and emotional processes of learning how to become a machine…

  8. Laboratory experiments from the toy store

    Science.gov (United States)

    Mcclelland, H. T.

    1992-01-01

    The following is a laboratory experiment designed to further understanding of materials science. This material could be taught to a typical student of materials science or manufacturing at the high school level or above. The objectives of this experiment are as follows: (1) to qualitatively demonstrate the concepts of elasticity, plasticity, and the strain rate and temperature dependence of the mechanical properties of engineering materials; (2) to qualitatively demonstrate the basics of extrusion including material flow, strain rate dependence of defects, lubrication effects, and the making of hollow shapes by extrusion (the two parts may be two separate experiments done at different times when the respective subjects are covered); and (3) to demonstrate the importance of qualitative observations and the amount of information which can be gathered without quantitative measurements.

  9. The influence of boutique store atmosphere on customer satisfaction, store loyalty and repurchase intention / Bianca van Niekerk

    OpenAIRE

    Van Niekerk, Bianca

    2015-01-01

    The global fashion retail industry has been characterised by fierce competition for numerous years. Boutiques face increasing pressure to distinctly differentiate themselves from competing retail stores offering fashion merchandise, since customers are becoming ever more demanding as fashion evolves and new trends reach South African retail stores. Accordingly, marketers have to ensure customer satisfaction, build store loyalty, and stimulate repurchase intentions in the fashion retail indust...

  10. Decomposition of forging dies for machining planning

    CERN Document Server

    Tapie, Laurent; Anselmetti, Bernard

    2009-01-01

    This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outstanding process planning.

  11. Decomposition of forging dies for machining planning

    OpenAIRE

    Tapie, Laurent; Mawussi, Kwamiwi; Anselmetti, Bernard

    2009-01-01

    International audience; This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outs...

  12. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    Energy Technology Data Exchange (ETDEWEB)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  13. Machine Learning for Medical Imaging.

    Science.gov (United States)

    Erickson, Bradley J; Korfiatis, Panagiotis; Akkus, Zeynettin; Kline, Timothy L

    2017-01-01

    Machine learning is a technique for recognizing patterns that can be applied to medical images. Although it is a powerful tool that can help in rendering medical diagnoses, it can be misapplied. Machine learning typically begins with the machine learning algorithm system computing the image features that are believed to be of importance in making the prediction or diagnosis of interest. The machine learning algorithm system then identifies the best combination of these image features for classifying the image or computing some metric for the given image region. There are several methods that can be used, each with different strengths and weaknesses. There are open-source versions of most of these machine learning methods that make them easy to try and apply to images. Several metrics for measuring the performance of an algorithm exist; however, one must be aware of the possible associated pitfalls that can result in misleading metrics. More recently, deep learning has started to be used; this method has the benefit that it does not require image feature identification and calculation as a first step; rather, features are identified as part of the learning process. Machine learning has been used in medical imaging and will have a greater influence in the future. Those working in medical imaging must be aware of how machine learning works. (©)RSNA, 2017.

  14. Mobile app and app store analysis, testing and optimisation

    OpenAIRE

    Harman, M.; Al-Subaihin, A.; Jia, Y.; Martin, W.; Sarro, F.; Zhang, Y.

    2016-01-01

    This talk presents results on analysis and testing of mobile apps and app stores, reviewing the work of the UCL App Analysis Group (UCLappA) on App Store Mining and Analysis. The talk also covers the work of the UCL CREST centre on Genetic Improvement, applicable to app improvement and optimisation.

  15. First come, First served: Enhancing the Convenience Store Service Experience

    Directory of Open Access Journals (Sweden)

    Yuan-Ling Chiao

    2012-09-01

    Full Text Available One distinctive characteristic of Taiwanese city streets is the omnipresence of convenience stores. These clean, brightly lit stores are in operation 24 hours a day, seven days a week, and offer a wide range of constantly updated lifestyle products and services. Past research in convenience stores have often overlooked the work experiences of convenience store employees, and their contribution to the overall service experience. Thus, the goal of this exploratory study is to explore the convenience store work environment, and to provide some suggestions for in-store technological enhancements. Data was collected through in-depth interviewing, field study observations and Living Lab methodologies. Our research reveals that convenience store employees experience several types of physical, mental and emotional strains throughout their shifts. These strains are often derived from excessive physical exertion and unpleasant interactions with customers. We suggest that certain in-store technological enhancements, such as seamless sensing and seamful actuating, can serve to alleviate employee sense of pressure and anxiety during customer interactions.

  16. How Store Design Affect the Consumer Evaluation of Fashion Items

    DEFF Research Database (Denmark)

    Münster, Mia Borch; Kristensen, Tore; Gabrielsen, Gorm

    Retailers are aware of the importance of store design as a part of their marketing strategy, and many resources are spent on designing favourable stores. It is well known, that the perceived environments affect consumers – for example sound, temperature, air quality, and light may directly...

  17. Self-organizing strategies for a column-store database

    NARCIS (Netherlands)

    Ivanova, M.G.; Kersten, M.L.; Nes, N.J.

    2008-01-01

    Column-store database systems open new vistas for improved maintenance through self-organization. Individual columns are the focal point, which simplify balancing conflicting requirements. This work presents two workload-driven self-organizing techniques in a column-store, i.e. adaptive segmentation

  18. Using a virtual grocery store to simulate shopping behaviour

    NARCIS (Netherlands)

    Herpen, van H.W.I.; Yu, T.; Broek, van den E.M.F.; Trijp, van J.C.M.

    2014-01-01

    Introduction Simulating a store environment by using virtual reality techniques offers important potential advantages for research into consumer behaviour. Through the use of virtual reality, the store can be simulated in a realistic and cost-efficient way [1,9]. This allows researchers to collect

  19. Using a virtual grocery store to simulate shopping behaviour

    NARCIS (Netherlands)

    Herpen, van H.W.I.; Yu, T.; Broek, van den E.M.F.; Trijp, van J.C.M.

    2014-01-01

    Introduction Simulating a store environment by using virtual reality techniques offers important potential advantages for research into consumer behaviour. Through the use of virtual reality, the store can be simulated in a realistic and cost-efficient way [1,9]. This allows researchers to collect d

  20. 41 CFR 109-27.5002 - Stores inventory turnover ratio.

    Science.gov (United States)

    2010-07-01

    ....5002 Stores inventory turnover ratio. Comparison of investment in stores inventories to annual issues... inventory) or in the average number of month's supply on hand. Turnover or number of month's supply is calculated only on current-use inventory. Performance goals, i.e., a six months investment or a turnover...