WorldWideScience

Sample records for machines lme swiss

  1. Investigation of the susceptibility of EUROFER97 in lead-lithium to liquid metal embrittlement (LME)

    Energy Technology Data Exchange (ETDEWEB)

    Bosch, R.W. [SCK-CEN, Belgian Nuclear Research Centre, Boeretang 200, B-2400 Mol (Belgium)], E-mail: rbosch@sckcen.be; Dyck, S. van; Al Mazouzi, A. [SCK-CEN, Belgian Nuclear Research Centre, Boeretang 200, B-2400 Mol (Belgium)

    2007-10-15

    Liquid metal embrittlement (LME) is defined as the brittle fracture (loss of ductility) of usually ductile materials in the presence of a liquid metal. The sensitivity to LME is likely to increase with irradiation hardening as localised stresses can promote the aggressive action of a liquid metal. To investigate the mechanical response of irradiated materials in contact with a liquid metal, an instrumented hot cell has been developed. The testing machine installed inside allows mechanical testing of active materials in liquid lead lithium under well controlled chemistry conditions. Typical mechanical tests that can be carried out are slow strain rate tests (SSRT), constant load and rising load tests at temperatures from 150 deg. C to 500 deg. C. In this paper the first results of the SSRT tests with EUROFER97 in argon and lead-lithium at different temperatures with different strain rates will be presented. The SSRT test method has been chosen due to the accelerated nature of the test, i.e., during straining the oxide layer will be ruptured and wetting of the sample surface by the lead-lithium melt is promoted. The results collected up till now showed no sign of LME. Tests with longer pre-exposure times and tests with irradiated samples will be carried out in the next phase. A longer pre-exposure time can enhance wetting and so the susceptibility to LME. An increase of the yield stress due to irradiation can also enhance the susceptibility to LME.

  2. Process acceptance and adjustment techniques for Swiss automatic screw machine parts. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Robb, J.M.

    1976-01-01

    Product tolerance requirements for small, cylindrical, piece parts produced on swiss automatic screw machines have progressed to the reliability limits of inspection equipment. The miniature size, configuration, and tolerance requirements (plus or minus 0.0001 in.) (0.00254 mm) of these parts preclude the use of screening techniques to accept product or adjust processes during setup and production runs; therefore, existing means of product acceptance and process adjustment must be refined or new techniques must be developed. The purpose of this endeavor has been to determine benefits gained through the implementation of a process acceptance technique (PAT) to swiss automatic screw machine processes. PAT is a statistical approach developed for the purpose of accepting product and centering processes for parts produced by selected, controlled processes. Through this endeavor a determination has been made of the conditions under which PAT can benefit a controlled process and some specific types of screw machine processes upon which PAT could be applied. However, it was also determined that PAT, if used indiscriminately, may become a record keeping burden when applied to more than one dimension at a given machining operation. (auth)

  3. Swiss ball abdominal crunch with added elastic resistance is an effective alternative to training machines

    DEFF Research Database (Denmark)

    Sundstrup, Emil; Jakobsen, Markus D; Andersen, Christoffer H

    2012-01-01

    to induce high level of muscle activation. PURPOSE: To compare muscle activation as measured by electromyography (EMG) of global core and thigh muscles during abdominal crunches performed on Swiss ball with elastic resistance or on an isotonic training machine when normalized for training intensity. METHODS......: 42 untrained individuals (18 men and 24 women) aged 28-67 years participated in the study. EMG activity was measured in 13 muscles during 3 repetitions with a 10 RM load during both abdominal crunches on training ball with elastic resistance and in the same movement utilizing a training machine...... (seated crunch, Technogym, Cesena, Italy). The order of performance of the exercises was randomized, and EMG amplitude was normalized to maximum voluntary isometric contraction (MVIC) EMG. RESULTS: When comparing between muscles, normalized EMG was highest in the rectus abdominis (P

  4. Basic configuration of the mean energy line (LME) V2.0; Configuration de base de la ligne moyenne energie (LME) V2.0

    Energy Technology Data Exchange (ETDEWEB)

    Uriot, D. [CEA Saclay, 91 - Gif sur Yvette (France); Bertrand, P. [Grand Accelerateur National d' Ions Lourds (GANIL), 14 - Caen (France); Biarrotte, J.L. [Paris-11 Univ., 91 - Orsay (France). Inst. de Physique Nucleaire

    2007-06-15

    The main purpose of the mean energy line (LME) is to receive the beam accelerated by the RFQ (deuterons, ions with q/A = 1/3, protons) and dispatch it to the linac in optimized conditions. LME is about 8 m long and the vacuum required is 10{sup -6} Pa and is composed of 10 identical quadrupoles. This document describes the state of the design of the LME for the injection system of the linac within the SPIRAL-2 project.

  5. Study on spillover effect of copper futures between LME and SHFE using wavelet multiresolution analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Research on information spillover effects between financial markets remains active in the economic community. A Granger-type model has recently been used to investigate the spillover between London Metal Exchange (LME) and Shanghai Futures Exchange (SHFE), however, possible correlation between the future price and return on different time scales have been ignored. In this paper, wavelet multiresolution decomposition is used to investigate the spillover effects of copper future returns between the two markets. The daily return time series are decomposed on 2n (n=1, ..., 6) frequency bands through wavelet multiresolution analysis. The correlation between the two markets is studied with decomposed data. It is shown that high frequency detail components represent much more energy than low-frequency smooth components. The relation between copper future daily returns in LME and that in SHFE are different on different time scales. The fluctuations of the copper future daily returns in LME have large effect on that in SHFE in 32-day scale, but small effect in high frequency scales. It also has evidence that strong effects exist between LME and SHFE for monthly responses of the copper futures but not for daily responses.

  6. Verification of precipitation forecasts by the DWD limited area model LME over Cyprus

    Directory of Open Access Journals (Sweden)

    K. Savvidou

    2007-01-01

    Full Text Available A comparison is made between the precipitation forecasts by the non-hydrostatic limited area model LME of the German Weather Service (DWD and observations from a network of rain gauges in Cyprus. This is a first attempt to carry out a preliminary verification and evaluation of the LME precipitation forecasts over the area of Cyprus. For the verification, model forecasts and observations were used covering an eleven month period, from 1/2/2005 till 31/12/2005. The observations were made by three Automatic Weather Observing Systems (AWOS located at Larnaka and Paphos airports and at Athalassa synoptic station, as well as at 6, 6 and 8 rain gauges within a radius of about 30 km around these stations, respectively. The observations were compared with the model outputs, separately for each of the three forecast days. The "probability of detection" (POD of a precipitation event and the "false alarm rate" (FAR were calculated. From the selected cases of the forecast precipitation events, the average forecast precipitation amounts in the area around the three stations were compared with the measured ones. An attempt was also made to evaluate the model's skill in predicting the spatial distribution of precipitation and, in this respect, the geographical position of the maximum forecast precipitation amount was contrasted to the position of the corresponding observed maximum. Maps with monthly precipitation totals observed by a local network of 150 rain gauges were compared with the corresponding forecast precipitation maps.

  7. A new family of spin crossover complexes with a tripod ligand containing three imidazoles: synthesis, characterization, and magnetic properties of [FeIIH3LMe](NO3)2.1.5H2O, [FeIIILMe].3.5H2O, [FeIIH3LMe][FeIILMe]NO3, and [FeIIH3LMe][FeIIILMe](NO3)2 (H3LMe) = Tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine).

    Science.gov (United States)

    Ikuta, Yuichi; Ooidemizu, Makoto; Yamahata, Yuichi; Yamada, Masahiro; Osa, Shutaro; Matsumoto, Naohide; Iijima, Seiichiro; Sunatsuki, Yukinari; Kojima, Masaaki; Dahan, Françoise; Tuchagues, Jean-Pierre

    2003-11-03

    A new family of spin crossover complexes, [Fe(II)H(3)L(Me)](NO(3))(2).1.5H(2)O (1), [Fe(III)L(Me)].3.5H(2)O (2), [Fe(II)H(3)L(Me)][Fe(II)L(Me)]NO(3) (3), and [Fe(II)H(3)L(Me)][Fe(III)L(Me)](NO(3))(2) (4), has been synthesized and characterized, where H(3)L(Me) denotes a hexadentate N(6) tripod ligand containing three imidazole groups, tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine. It was found that the spin and oxidation states of the iron complexes with this tripod ligand are tuned by the degree of deprotonation of the imidazole groups and by the 2-methyl imidazole substituent. Magnetic susceptibility and Mössbauer studies revealed that 1 is an HS-Fe(II) complex, 2 exhibits a spin equilibrium between HS and LS-Fe(III), 3 exhibits a two-step spin transition, where the component [Fe(II)L(Me)](-) with the deprotonated ligand participates in the spin transition process in the higher temperature range and the component [Fe(II)H(3)L(Me)](2+) with the neutral ligand participates in the spin transition process in the lower temperature range, and 4 exhibits spin transition of both the Fe(II) and Fe(III) sites. The crystal structure of 3 consists of homochiral extended 2D puckered sheets, in which the capped tripodlike components [Fe(II)H(3)L(Me)](2+) and [Fe(II)L(Me)](-) are alternately arrayed in an up-and-down mode and are linked by the imidazole-imidazolate hydrogen bonds. Furthermore, the adjacent 2D homochiral sheets are stacked in the crystal lattice yielding a conglomerate as confirmed by the enantiomeric circular dichorism spectra. Compounds 3 and 4 showed the LIESST (light induced excited spin state trapping) and reverse-LIESST effects upon irradiation with green and red light, respectively.

  8. Hetero-metallic {3d-4f-5d} complexes: preparation and magnetic behavior of trinuclear [(L(Me2)Ni-Ln){W(CN)(8)}] compounds (Ln = Gd, Tb, Dy, Ho, Er, Y; L(Me2) = Schiff base) and variable SMM characteristics for the Tb derivative.

    Science.gov (United States)

    Sutter, Jean-Pascal; Dhers, Sébastien; Rajamani, Raghunathan; Ramasesha, S; Costes, Jean-Pierre; Duhayon, Carine; Vendier, Laure

    2009-07-06

    Assembling bimetallic {Ni-Ln}(3+) units and {W(CN)(8)}(3-) is shown to be an efficient route toward heteronuclear {3d-4f-5d} compounds. The reaction of either the binuclear [{L(Me2)Ni(H(2)O)(2)}{Ln(NO(3))(3)}] complexes or their mononuclear components [L(Me2)Ni] and Ln(NO(3))(3) with (HNBu(3))(3){W(CN)(8)} in dmf followed by diffusion of tetrahydrofuran yielded the trinuclear [{L(Me2)NiLn}{W(CN)(8)}] compounds 1 (Ln = Y), 2a,b (Gd), 3a,b (Tb), 4 (Dy), 5 (Ho), and 6 (Er) as crystalline materials. All of the derivatives possess the trinuclear core resulting from the linkage of the {W(CN)(8)} to the Ni center of the {Ni-Ln} unit. Differences are found in the solvent molecules acting as ligands and/or in the lattice depending on the crystallization conditions. For all the compounds ferromagnetic {Ni-W} and {Ni-Ln} (Ln = Gd, Tb, Dy, and Er} interactions are operative resulting in high spin ground states. Parameterization of the magnetic behaviors for the Y and Gd derivatives confirmed the strong cyano-mediated {Ni-W} interaction (J(NiW) = 27.1 and 28.5 cm(-1)) compared to the {Ni-Gd} interaction (J(NiGd) = 2.17 cm(-1)). The characteristic features for slow relaxation of the magnetization are observed for two Tb derivatives, but these are modulated by the crystal phase. Analysis of the frequency dependence of the alternating current susceptibility data yielded U(eff)/k(B) = 15.3 K and tau(0) = 4.5 x 10(-7) s for one derivative whereas no maxima of chi(M)'' appear above 2 K for the second one.

  9. Swiss State Secretary visits CERN

    CERN Multimedia

    2008-01-01

    The new Swiss State Secretary for Education and Research recently visited CERN. Peter Jenni, the spokesperson for ATLAS, gave Mauro Dell’Ambrogio, the new Swiss State Secretary for Education and Research, a tour of ATLAS and the LHC tunnel.On 2 April, the newly appointed Swiss State Secretary for Education and Research, Mauro Dell’Ambrogio, was welcomed to CERN by Director-General Robert Aymar. On arrival the Swiss minister was given a guided tour of ATLAS and the adjoining LHC tunnel by Peter Jenni, the ATLAS spokesperson. Dr Dell’Ambrogio was then greeted by Swiss scientists and attended presentations by young post doc physicists about Swiss contributions to CMS and LHCb, in particular their work concerning hardware contribution and data analysis. There are 120 physicists from Swiss universities working on CERN’s experiments, and many more Swiss people working at CERN in other departments due to Switzerland’s special position as a host state. Also before ...

  10. Çeşitli yaş gruplarında furkasyon problemlerinin görülme sıklığı

    Directory of Open Access Journals (Sweden)

    H. Ebru Olgun Erdemir

    2011-11-01

    alışmaya dahil edilen hastaların 49’u kadın 48’i erkek olup sigara içen toplam birey sayısı 33’tü.

    Bulgular: Her molar diş için furkasyon problemi görülme sıklığının ve derecesinin yaşla birlikte arttığı belirlendi. Mandibular molar dişlerin furkasyon tutulum derecelerinin ve sıklığının maksillar molar dişlere göre daha fazla olduğu tespit edildi. 1. ve 2. molarlara göre furkasyon problemi görülme sıklığının karşılaştırılmasıyla I. ve II. derece furkasyon problemlerinin 2. molarlarda, III. ve IV. derece furkasyon problemlerinin ise 1. molarlarda daha fazla olduğu belirlendi. Ayrıca erkeklerde kadınlara göre, sigara içenlerde ise içmeyenlere göre furkasyon problemlerinin daha fazla sıklıkta görüldüğü tespit edildi.

    Sonuç: Molar dişlerde furkasyon problemlerinin görülme sıklığı ve derecesi yaşla birlikte artmaktadır. Dişin alt ya da üst çenede bulunmasının, 1. ya da 2. molar olmasının, cinsiyetin ve sigara kullanımının furkasyon problemlerinin görülme sıklığı üzerine etkili olduğu tespit edildi.

    Anahtar kelimeler: Furkasyon problemleri, periodontitis

  11. Statelessness determination: the Swiss experience

    Directory of Open Access Journals (Sweden)

    Karen Hamann

    2017-02-01

    Full Text Available While a detailed law on statelessness determination is recommended by UNHCR and others, Swiss practice in statelessness determination has evolved without one. Despite this, Swiss practice has been shown to be rather progressive, at least in some areas of statelessness recognition and includes better treatment of the stateless in comparison with refugees.

  12. SwissTex France at ITMA ASIA+CITME 2010

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ SwissTex France SAS (previously known under the brands Verdol,ICBT,Rieter FYT and RITM),a major player in the field of textile machinery with 100 years experience in yarn machinery,is going to participate in ITMA ASIA+CITME show being held June 22-26,2010,at Booth D22.Hall W2 and present one of the most complete ranges for textile machinery.It offers today a very complete range on the market of:twisting machines for embroidery and sewing thread applications,single and double covering machines for hosiery,stockings,sportswear and technical yarns,air covering machines for hosiery,stockings and sportswear...and combined machines to twist and shrink nylon yarn through thermal treatment.

  13. When Machines Design Machines!

    DEFF Research Database (Denmark)

    2011-01-01

    Until recently we were the sole designers, alone in the driving seat making all the decisions. But, we have created a world of complexity way beyond human ability to understand, control, and govern. Machines now do more trades than humans on stock markets, they control our power, water, gas...... and food supplies, manage our elevators, microclimates, automobiles and transport systems, and manufacture almost everything. It should come as no surprise that machines are now designing machines. The chips that power our computers and mobile phones, the robots and commercial processing plants on which we...... depend, all are now largely designed by machines. So what of us - will be totally usurped, or are we looking at a new symbiosis with human and artificial intelligences combined to realise the best outcomes possible. In most respects we have no choice! Human abilities alone cannot solve any of the major...

  14. Swiss Light Source SLS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    The Paul Scherrer Institute has begun work on the implementation of the Swiss Synchrotron Light Source (SLS). The construction of this facility, which will have international scope, is intended to provide a national focus for co-operation between various disciplines and for research in material sciences. Although basic research in physics and chemistry, biology, medicine and environmental sciences would seem to be in the foreground, industrial users also have an interest in the SLS. At present, this mainly centres on investigations into the structure of biological and chemical molecules, the use of high-performance methods of analysis, and the manufacture and investigation of microstructures. SLS is planned to be taken into service with an initial experimental installation by the middle of 2001. In this brochure an overview is presented on the main characteristics of the SLS facility and on its significance as a tool for interdisciplinary research.

  15. Swiss legislation on dog ownership

    CERN Multimedia

    DSU Department

    2008-01-01

    The Swiss Permanent Mission in Geneva has requested CERN to inform the members of its personnel that a notice relating to Swiss legislation on dog ownership has been published on-line at the following address: http://www.eda.admin.ch/eda/en/home/topics/intorg/un/unge/gepri/pet.html This legislation is applicable to all international civil servants who own a dog. Relations with the Host States Service mailto:relations.secretariat@cern.ch http://www.cern.ch/relations/

  16. A Swiss Pocket Knife for Computability

    Directory of Open Access Journals (Sweden)

    Neil D. Jones

    2013-09-01

    Full Text Available This research is about operational- and complexity-oriented aspects of classical foundations of computability theory. The approach is to re-examine some classical theorems and constructions, but with new criteria for success that are natural from a programming language perspective. Three cornerstones of computability theory are the S-m-ntheorem; Turing's "universal machine''; and Kleene's second recursion theorem. In today's programming language parlance these are respectively partial evaluation, self-interpretation, and reflection. In retrospect it is fascinating that Kleene's 1938 proof is constructive; and in essence builds a self-reproducing program. Computability theory originated in the 1930s, long before the invention of computers and programs. Its emphasis was on delimiting the boundaries of computability. Some milestones include 1936 (Turing, 1938 (Kleene, 1967 (isomorphism of programming languages, 1985 (partial evaluation, 1989 (theory implementation, 1993 (efficient self-interpretation and 2006 (term register machines. The "Swiss pocket knife'' of the title is a programming language that allows efficient computer implementation of all three computability cornerstones, emphasising the third: Kleene's second recursion theorem. We describe experiments with a tree-based computational model aiming for both fast program generation and fast execution of the generated programs.

  17. Integral Politics: A Swiss Perspective

    Directory of Open Access Journals (Sweden)

    Elke Fein

    2010-03-01

    Full Text Available This article tells the story of the Swiss NGO “Integrale Politik (ip” founded by about 20 people in November 2007 with the aim of becoming a regular political party at a later stage (www.integrale-politik.ch. We wish to make ip’s concepts and approaches known to a wider public. Inspired by integral thinkers such as Jean Gebser and Ken Wilber, ip develops its own ideas and interpretations of integral in view of the concrete challenges of Swiss and European politics. Integral political culture is understood, for example, as including practices addressing all senses, turning political commitment into an experience of meaningful activity and an expression of joy, ease and celebrating life. One of the most important challenges currently faced by the group is to perpetuate and further develop this working culture as the organization grows. Its success in doing this seems to be one of the main reasons for ip’s attractiveness to the Swiss cultural creative sector in general and the growing integrally-minded community in particular to whom it gives an increasingly visible face and a clear-cut voice. At the same time, the Swiss political system offers particularly favourable preconditions and thus, a fruitful ground for new political ideas and experiments such as this integral political one.

  18. Integral Politics: A Swiss Perspective

    Directory of Open Access Journals (Sweden)

    Elke Fein

    2010-03-01

    Full Text Available This article tells the story of the Swiss NGO “Integrale Politik (ip” founded by about 20 people in November 2007 with the aim of becoming a regular political party at a later stage (www.integrale-politik.ch. We wish to make ip’s concepts and approaches known to a wider public. Inspired by integral thinkers such as Jean Gebser and Ken Wilber, ip develops its own ideas and interpretations of integral in view of the concrete challenges of Swiss and European politics.Integral political culture is understood, for example, as including practices addressing all senses, turning political commitment into an experience of meaningful activity and an expression of joy, ease and celebrating life. One of the most important challenges currently faced by the group is to perpetuate and further develop this working culture as the organization grows. Its success in doing this seems to be one of the main reasons for ip’s attractiveness to the Swiss cultural creative sector in general and the growing integrally-minded community in particular to whom it gives an increasingly visible face and a clear-cut voice. At the same time, the Swiss political system offers particularly favourable preconditions and thus, a fruitful ground for new political ideas and experiments such as this integral political one.

  19. Concentration of Swiss Elite Orienteers.

    Science.gov (United States)

    Seiler, Roland; Wetzel, Jorg

    1997-01-01

    A visual discrimination task was used to measure concentration among 43 members of Swiss national orienteering teams. Subjects were above average in the number of target objects dealt with and in duration of continuous concentration. For females only, ranking in orienteering performance was related to quality of concentration (ratio of correct to…

  20. ENET News March 2004 - Information on Swiss energy research; ENET News, Maerz 2004, Nr. 57 deutsch

    Energy Technology Data Exchange (ETDEWEB)

    Wellstein, J.

    2004-07-01

    This edition of the Swiss Federal Office of Energy's (SFOE) magazine with information on Swiss energy research presents a large selection of articles on various energy-relevant topics. These include the Swiss research strategy for the period 2004 to 2007, a discussion on wind energy, saving electricity, stand-by losses of coffee machines and information on hydrogen and fuel-cells. Further articles cover road-traffic topics including zero-emission vehicles and clean engine technology. Also, research on better fuel use in nuclear plant and models for batch-processes in the processing industry are looked at. Further articles cover the use of photovoltaics, wood fuels and biomass. Results of a field-analysis of heat-pump installations and the storage of solar energy using zinc powder as well as building insulation are covered. Finally, the ETDE is honoured as being the largest collection of energy documents.

  1. Machine Translation

    Institute of Scientific and Technical Information of China (English)

    张严心

    2015-01-01

    As a kind of ancillary translation tool, Machine Translation has been paid increasing attention to and received different kinds of study by a great deal of researchers and scholars for a long time. To know the definition of Machine Translation and to analyse its benefits and problems are significant for translators in order to make good use of Machine Translation, and helpful to develop and consummate Machine Translation Systems in the future.

  2. Sustainable machining

    CERN Document Server

    2017-01-01

    This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

  3. Reminder: Swiss and French cards

    CERN Multimedia

    2012-01-01

    Communication from the HR Department to members of personnel holding an employment or association contract, above 50% and for more than 3 months, with the Organization. The HR Department would like to remind all members of personnel concerned that they are obliged to: • hold a valid Swiss  Légitimation card AND a valid French card (“Titre de séjour spécial” or “attestation de fonctions”) at all times during the exercise of their functions in the Organization; • return these documents as soon as their functions in the Organization cease. Not following these rules could be prejudicial to the Organization and appropriate measures may be taken towards the member of personnel concerned. Information and procedures concerning Swiss and French cards (first application, renewal, theft/loss, etc.) are available in the Admin e-guide. Users and Unpaid Associates must contact the Users Office HR Department Tel.: 729...

  4. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring : - a recent passport photo (with NAME and first name on the back) - the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, bât 33.1-009/1-011. HR Division will notify members of personnel as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  5. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR Division

    2000-01-01

    Members of the personnel, holders ofSWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:a recent passport photo (with NAME and first name on the back)the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to:Bureau des cartes, Bât 33.1-009/1-011.HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  6. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Human Resources Division; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring: ­ a recent passport photo (with NAME and first name on the back) ­ the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, Bât 33.1-009/1-011 Members of the personnel will be notified by HR Division as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsability in case of difficulties with the customs authorities or the police.

  7. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:-\ta recent passport photo (with NAME and first name on the back)-\tthe expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to:Bureau des cartes, bât 33.1-009/1-011.HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  8. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring : a recent passport photo (with NAME and first name on the back) the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication)to: Bureau des cartes, Bât 33.1-009/1-011. Members of personnel will be notified by HR Division as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  9. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring: - a recent passport photo (with NAME and first name on the back) - the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, bldg 33.1-009/1-011. HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.

  10. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR DIVISION

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:a recent passport photo (with NAME and first name on the back)the expired (or due to expire) card and a photocopy (for certified authentication)to: Bureau des cartes, building 33/1-025Members of personnel will be notified by HR Division as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  11. ATLAS honours two Swiss companies

    CERN Multimedia

    2003-01-01

    On 18 June 2003, ATLAS presented awards to two Swiss companies, Cicorel SA and Isola Composites AG, the suppliers of the electrodes and the composite bars for the electromagnetic calorimeter. "Physicists' dreams could not become reality without industry's active participation and creativity", said Peter Jenni, ATLAS spokesman, congratulating two of the collaboration's suppliers, to which it presented awards on 18 June. Swiss quality was the order of the day, since the two companies, Cicorel SA and Isola Composites AG, which are both involved in the production of components for the electromagnetic calorimeter, are located in Switzerland's Jura region. "You have taken up and met a challenge that bordered on the impossible", added Peter Jenni. The suppliers who received the ATLAS award: Hans Wyss from Cicorel SA (left) and Constant Gentile from Isola Composites (right).Circorel SA produced enough electrodes to cover an entire football pitch. Each electrode, measuring 2 square metres, consists of three layers of...

  12. Swiss and French cards - Reminder

    CERN Multimedia

    HR Department

    2011-01-01

    Communication from the HR Department to members of personnel holding an employment or association contract, above 50% and for more than 3 months, with the Organization. The HR Department would like to remind all members of the personnel concerned that they are obliged to: hold a valid Swiss Légitimation card AND a valid French card (“Titre de séjour spécial” or “attestation de fonctions”) at all times during the exercise of their functions in the Organization; return these documents as soon as their functions in the Organization cease. Not following these rules could be prejudicial to the Organization and appropriate measures may be taken with respect to the member of the personnel concerned. Information and procedures concerning Swiss and French cards (first application, renewal, theft/loss, etc.) are available in the Admin e-guide: https://cern.ch/admin-eguide/cartes/proc_cartes_home.asp Users and Unpaid Associates must ...

  13. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR Division

    2001-01-01

    Members of the personnel and their families, holders of SWISS LEGITIMATION CARDS due to expire during the year 2001, need to change them. Those concerned should bring : a recent passport photo (with NAME and first name on the back) the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to Bureau des cartes, building 33/1-009/1-015. Members of the personnel will be notified by the Social and Statutary Conditions Group, HR Division as soon as the new cards are available. Be careful: If you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  14. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:-\ta recent passport photo (with NAME and first name on the back)-\tthe expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to:Bureau des cartes, bât 33.1-009/1-011.HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  15. Expertise in Swiss mathematics instruction

    OpenAIRE

    2011-01-01

    This chapter draws on data and findings from several video studies to describe the quality of mathematics teaching in Switzerland. The focus is on features of instructional practice and quality as core components of classroom behavior that reflect the teacher’s expertise in creating optimal learning opportunities. The didactic triangle is used as the basis for describing the profile of expertise in Swiss mathematics instruction in terms of three interdependent dimensions of ins...

  16. New law on Swiss nationality

    CERN Multimedia

    2015-01-01

    CERN has recently been informed by the Swiss authorities that the Swiss Parliament adopted a new law on Swiss nationality in June 2014, which is due to enter into force in the autumn of 2016.   Under the new law, naturalisation can be granted only if the following conditions are met at the time of application: 1. the applicant must hold a settlement permit (autorisation d’établissement or permis C); and 2. the applicant must supply proof that he or she has resided in Switzerland for a total of ten years, including during three of the five years preceding the application (see Article 9 below). For the purposes of calculating the length of residence in Switzerland, any period of residence as a holder of a residence or settlement permit (autorisation de séjour or autorisation d’établissement), a temporary admission document (admission provisoire), or a legitimation card (carte de légitimation) issued by the DFAE will be taken...

  17. Paul Scherrer Institute Scientific Report 1998. Volume VII: Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Weyer, Heinz Josef; Bugmann, Marlen; Neuhaus, Sibylle [eds.

    1999-09-01

    The Swiss Light Source (SLS) is a medium energy range light source that also provides light with high brilliance in the regime of hard X-rays. It is being constructed at PSI and scheduled to be operational in 2001. A series of new features that were adopted for the design and operation of this machine, is described in this annual report for 1998 figs., tabs., refs.

  18. Simple machines

    CERN Document Server

    Graybill, George

    2007-01-01

    Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

  19. 21 CFR 133.196 - Swiss cheese for manufacturing.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Swiss cheese for manufacturing. 133.196 Section... Standardized Cheese and Related Products § 133.196 Swiss cheese for manufacturing. Swiss cheese for manufacturing conforms to the definition and standard of identity prescribed for swiss cheese by § 133.195...

  20. Electric machine

    Science.gov (United States)

    El-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Reddy, Patel Bhageerath [Madison, WI

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  1. The Machine within the Machine

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Although Virtual Machines are widespread across CERN, you probably won't have heard of them unless you work for an experiment. Virtual machines - known as VMs - allow you to create a separate machine within your own, allowing you to run Linux on your Mac, or Windows on your Linux - whatever combination you need.   Using a CERN Virtual Machine, a Linux analysis software runs on a Macbook. When it comes to LHC data, one of the primary issues collaborations face is the diversity of computing environments among collaborators spread across the world. What if an institute cannot run the analysis software because they use different operating systems? "That's where the CernVM project comes in," says Gerardo Ganis, PH-SFT staff member and leader of the CernVM project. "We were able to respond to experimentalists' concerns by providing a virtual machine package that could be used to run experiment software. This way, no matter what hardware they have ...

  2. Chiral Swiss rolls show a negative refractive index.

    Science.gov (United States)

    Wiltshire, M C K; Pendry, J B; Hajnal, J V

    2009-07-22

    Chiral Swiss rolls, consisting of a metal/dielectric laminate tape helically wound on an insulating mandrel, have been developed to form the basis of a highly chiral metamaterial. We have fabricated these elements using a custom-built machine, and have characterized them. We find that the permeability, permittivity, and chirality are all resonant in the region of 80 MHz. The chirality is so strong that it can be directly measured by observing the magnetic response to an applied electric field, and is larger than either the permeability or the permittivity. We have estimated the refractive indices from these data, and find both strong circular dichroism and a wide frequency range where the refractive index is negative.

  3. Machine Learning

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Machine learning, which builds on ideas in computer science, statistics, and optimization, focuses on developing algorithms to identify patterns and regularities in data, and using these learned patterns to make predictions on new observations. Boosted by its industrial and commercial applications, the field of machine learning is quickly evolving and expanding. Recent advances have seen great success in the realms of computer vision, natural language processing, and broadly in data science. Many of these techniques have already been applied in particle physics, for instance for particle identification, detector monitoring, and the optimization of computer resources. Modern machine learning approaches, such as deep learning, are only just beginning to be applied to the analysis of High Energy Physics data to approach more and more complex problems. These classes will review the framework behind machine learning and discuss recent developments in the field.

  4. Tax evasion and Swiss bank deposits

    DEFF Research Database (Denmark)

    Johannesen, Niels

    2014-01-01

    Bank deposits in offshore financial centers may be used to evade taxes on interest income. A recent EU reform limits the scope for this type of tax evasion by introducing a withholding tax on interest income earned by EU households in Switzerland and several other offshore centers. This paper...... quarters immediately before and after the tax was introduced. We also present evidence suggesting that the drop in Swiss bank deposits was driven by behavioral responses aiming to escape the tax - such as the transfer of funds to bank accounts in other offshore centers and the transfer of formal ownership...... estimates the impact of the withholding tax on Swiss bank deposits held by EU residents while using non-EU residents who were not subject to the tax as a comparison group. We present evidence that Swiss bank deposits owned by EU residents declined by 30–40% relative to other Swiss bank deposits in two...

  5. Swiss EMBnet node web server.

    Science.gov (United States)

    Falquet, Laurent; Bordoli, Lorenza; Ioannidis, Vassilios; Pagni, Marco; Jongeneel, C Victor

    2003-07-01

    EMBnet is a consortium of collaborating bioinformatics groups located mainly within Europe (http://www.embnet.org). Each member country is represented by a 'node', a group responsible for the maintenance of local services for their users (e.g. education, training, software, database distribution, technical support, helpdesk). Among these services a web portal with links and access to locally developed and maintained software is essential and different for each node. Our web portal targets biomedical scientists in Switzerland and elsewhere, offering them access to a collection of important sequence analysis tools mirrored from other sites or developed locally. We describe here the Swiss EMBnet node web site (http://www.ch.embnet.org), which presents a number of original services not available anywhere else.

  6. Brown Swiss cattle cytogenetic analysis

    Directory of Open Access Journals (Sweden)

    Rita Maria Ladeira Pires

    2010-02-01

    Full Text Available At 1985, a Brown Swiss herd from the Institute of Animal Science and Pastures, APTA/ SAA was cytogenetically analyzed and 1/29 Robertsonian translocation was observed. Such anomaly is related to fertility reduction. Quimeric abnormality such as 60,XX/60,XY in freemartin females. This study aimed to evaluate the incidence of cromossomic abnormalities in Brown Swiss animals, descending form herd karyotyped earlier. After 25 years, 127 animals (97 females and 30 males from this herd were karyotyped by metaphases obtained from blood lymphocyte cultures. The typical diploid number 2n=60, 58 acrocentric and two X submetacentric chromosomes were confirmed in 94 females and in 27 males the sexual complement X and Y, both submetacentric, although from different sizes. Four females from gemelar parturition whit males were karyotyped. Three of them presented quimerism 60,XX/60,XY (one with 25.8% of female cells (XX and 74.2% male cells (XY; one another with 10% of cells XX e 90% of XY and the third with 50% of each type showing genital masculinization, diagnosed as freemartism and discarded from herd. Two hundred and five cells were analyzed from another female twins and only 60,XX cells were found, diagnosed as normal. His sister also were normal (60,XY. The another three males were also analyzed from gemelar heterosexual parturition, with karyotype 60,XX/60,XY. Cytogenetic analysis are a safe methodology for freemartin abnormalities identification in female bovine twins with male bovine, giving the opportunity of selecting fertile animals, avoiding loses in the management of sterile animals. Robertsonian’s translocation was not observed in any of the animals analyzed.

  7. Swiss Property kontor = Offices of Swiss Property / kommenteerinud Tõnis Sõõrumaa

    Index Scriptorium Estoniae

    2015-01-01

    Swiss Property kontoriruumid Tallinnas Rotermanni 8. Sisekujunduse autorid Kätlin Ölluk, Tiina Kesküla, Katy Seppel, Aet Kiivet, Liina Rohtlaan, Marita Mätas, Lilian Esing, Kristin Boginski (Swiss Property); arhitektid Yoko Azukawa, Hanno Grossschmidt, Tomomi Hayashi

  8. Swiss Property kontor = Offices of Swiss Property / kommenteerinud Tõnis Sõõrumaa

    Index Scriptorium Estoniae

    2015-01-01

    Swiss Property kontoriruumid Tallinnas Rotermanni 8. Sisekujunduse autorid Kätlin Ölluk, Tiina Kesküla, Katy Seppel, Aet Kiivet, Liina Rohtlaan, Marita Mätas, Lilian Esing, Kristin Boginski (Swiss Property); arhitektid Yoko Azukawa, Hanno Grossschmidt, Tomomi Hayashi

  9. Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Chikkagoudar, Satish; Chatterjee, Samrat; Thomas, Dennis G.; Carroll, Thomas E.; Muller, George

    2017-04-21

    The absence of a robust and unified theory of cyber dynamics presents challenges and opportunities for using machine learning based data-driven approaches to further the understanding of the behavior of such complex systems. Analysts can also use machine learning approaches to gain operational insights. In order to be operationally beneficial, cybersecurity machine learning based models need to have the ability to: (1) represent a real-world system, (2) infer system properties, and (3) learn and adapt based on expert knowledge and observations. Probabilistic models and Probabilistic graphical models provide these necessary properties and are further explored in this chapter. Bayesian Networks and Hidden Markov Models are introduced as an example of a widely used data driven classification/modeling strategy.

  10. Machine testning

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with a laboratory exercise of 3 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercise includes a series of tests carried out by the student on a conventional and a numerically controled lathe, respectively. This document...

  11. Representational Machines

    DEFF Research Database (Denmark)

    Petersson, Dag; Dahlgren, Anna; Vestberg, Nina Lager

    to the enterprises of the medium. This is the subject of Representational Machines: How photography enlists the workings of institutional technologies in search of establishing new iconic and social spaces. Together, the contributions to this edited volume span historical epochs, social environments, technological...

  12. Aspects regarding the aided programming of the electroerosion machine ROBOFIL 310

    Directory of Open Access Journals (Sweden)

    Ioan Mocian

    2011-12-01

    Full Text Available This paper presents the solutions to some practical issues regarding the design of technologies with the wire electroerosion numerical command machine ROBOFIL 310, produced by the Swiss manufacturer Charmilles. As part of the study an AutoCAD application was designed using Visual Basic and the .NET platform, aimed at helping the designer identify the minimum radius of a contour before sending it to the machine

  13. Adding machine and calculating machine

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In 1642 the French mathematician Blaise Pascal(1623-1662) invented a machine;.that could add and subtract. It had.wheels that each had: 1 to 10 marked off along its circumference. When the wheel at the right, representing units, made one complete circle, it engaged the wheel to its left, represents tens, and moved it forward one notch.

  14. Nutrient intake of Swiss toddlers.

    Science.gov (United States)

    Brunner, Thomas A; Casetti, Luca; Haueter, Petra; Müller, Pascal; Nydegger, Andreas; Spalinger, Johannes

    2017-08-10

    During the first years of life, food preferences are shaped that might last throughout a person's entire life affecting his/her health in the long term. However, knowledge on early feeding habits is still limited for toddlers. Therefore, the goal of the present study was to: (1) assess toddlers' nutrient intake; (2) compare the findings to past studies as well as to national feeding recommendations and (3) identify major food sources for energy and macronutrients. A food survey using a 4-day diary was conducted. The dietary software nut.s(®) was used to analyse the data. A cohort of 188 healthy toddlers (aged 1-3 years) was analysed. The energy intake of most toddlers was below the recommended daily intake (RDI) but in accordance with earlier studies. Protein intake was three- to fourfold higher than the RDI and reached the proposed upper limit of 15% of total energy intake. Fat intake was in accordance with the RDI, but the balance of saturated and unsaturated fatty acids should be improved. Carbohydrate intake met the RDI. For the micronutrients, iron and vitamin D intakes showed critical values. As in other European countries, the diet of Swiss toddlers in general seems adequate but does not meet all nutritional requirements. In particular, the quality of the fats and vitamin D supplementation should be improved. For proteins and iron, additional research is needed to gain more confidence in the recommendations.

  15. Genesis machines

    CERN Document Server

    Amos, Martyn

    2014-01-01

    Silicon chips are out. Today's scientists are using real, wet, squishy, living biology to build the next generation of computers. Cells, gels and DNA strands are the 'wetware' of the twenty-first century. Much smaller and more intelligent, these organic computers open up revolutionary possibilities. Tracing the history of computing and revealing a brave new world to come, Genesis Machines describes how this new technology will change the way we think not just about computers - but about life itself.

  16. Tax Evasion and Swiss Bank Deposits

    DEFF Research Database (Denmark)

    Johannesen, Niels

    Bank deposits in jurisdictions with banking secrecy constitute an effective tool to evade taxes on interest income. A recent EU reform reduces the scope for this type of tax evasion by introducing a source tax on interest income earned by EU residents in Switzerland and several other jurisdictions...... with banking secrecy. In this paper, we estimate the impact of the source tax on Swiss bank deposits held by EU residents while using that non-EU residents were not subject to the tax to apply a natural experiment methodology. We find that the 15% source tax caused Swiss bank deposits of EU residents to drop...... by more than 40% with most of the response occurring in two quarters immediately before and after the source tax was introduced. The estimates imply an elasticity of Swiss deposits with respect to the net-of-source-tax-rate in the range 2.5-3....

  17. Mountain Regions in Swiss Politics and Policies

    Directory of Open Access Journals (Sweden)

    Werner Bätzing

    2015-08-01

    Full Text Available Reviewed: Die schweizerischen Berggebiete in der Politik [ Mountain Regions in Swiss Politics and Policies] By Gilles Rudaz and Bernard Debarbieux. Translated from French (see below. Zurich, Switzerland: vdf Hochschulverlag, 2014. 136 pp. CHF 24.00, € 21.00. Also available as an e-book. ISBN 978-3-7281-3604-6. Reviewed: La montagne Suisse en politique [ Mountain Regions in Swiss Politics and Policies] By Gilles Rudaz and Bernard Debarbieux. Lausanne, Switzerland: Presses polytechniques et universitaires romandes, 2013. 128 pp. CHF 17.50. Also available as an e-book. ISBN 978-2-88915-043-4.

  18. Simulating Turing machines on Maurer machines

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    In a previous paper, we used Maurer machines to model and analyse micro-architectures. In the current paper, we investigate the connections between Turing machines and Maurer machines with the purpose to gain an insight into computability issues relating to Maurer machines. We introduce ways to

  19. Environmentally Friendly Machining

    CERN Document Server

    Dixit, U S; Davim, J Paulo

    2012-01-01

    Environment-Friendly Machining provides an in-depth overview of environmentally-friendly machining processes, covering numerous different types of machining in order to identify which practice is the most environmentally sustainable. The book discusses three systems at length: machining with minimal cutting fluid, air-cooled machining and dry machining. Also covered is a way to conserve energy during machining processes, along with useful data and detailed descriptions for developing and utilizing the most efficient modern machining tools. Researchers and engineers looking for sustainable machining solutions will find Environment-Friendly Machining to be a useful volume.

  20. Machine Transliteration

    CERN Document Server

    Knight, K; Knight, Kevin; Graehl, Jonathan

    1997-01-01

    It is challenging to translate names and technical terms across languages with different alphabets and sound inventories. These items are commonly transliterated, i.e., replaced with approximate phonetic equivalents. For example, "computer" in English comes out as "konpyuutaa" in Japanese. Translating such items from Japanese back to English is even more challenging, and of practical interest, as transliterated items make up the bulk of text phrases not found in bilingual dictionaries. We describe and evaluate a method for performing backwards transliterations by machine. This method uses a generative model, incorporating several distinct stages in the transliteration process.

  1. Machine Protection

    CERN Document Server

    Schmidt, R

    2014-01-01

    The protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent. It is related to the increasing beam power of high-power proton accelerators such as ISIS, SNS, ESS and the PSI cyclotron, to the emission of synchrotron light by electron–positron accelerators and FELs, and to the increase of energy stored in the beam (in particular for hadron colliders such as LHC). Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping the beam at low energy) and an ...

  2. Gross Revenue risk in Swiss dairy farming

    NARCIS (Netherlands)

    Benni, El N.; Finger, R.

    2013-01-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how o

  3. Perceptions of Learning among Swiss Watch Managers

    Science.gov (United States)

    Tajeddini, Kayhan

    2009-01-01

    Purpose: This paper aims to explore managers' perceptions of learning within a sample of Swiss watch firms. Design/methodology/approach: A purposeful (judgmental) stratified sampling method was employed, where in-depth interviews with 13 marketing managers and owners were carried out over a three-month period. Meaning units (MUs) were abstracted,…

  4. Cern reaches for new frontiers (SWISS MADE)

    CERN Multimedia

    Beaumont, Adam

    2006-01-01

    "For more than 50 ears scientists at CERN, the world's largest particle physics lboratory, have been unravelling the secrets of the universe, But what is life like inside the European Organization for Nuclear Research of the Swiss-French border? Two young scientists share their experiences with swissinfo."

  5. Gross Revenue risk in Swiss dairy farming

    NARCIS (Netherlands)

    Benni, El N.; Finger, R.

    2013-01-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how

  6. The 'Swiss cheese' instability of bacterial biofilms

    CERN Document Server

    Jang, Hongchul; Stocker, Roman

    2012-01-01

    We demonstrate a novel pattern that results in bacterial biofilms as a result of the competition between hydrodynamic forces and adhesion forces. After the passage of an air plug, the break up of the residual thin liquid film scrapes and rearranges bacteria on the surface, such that a Swiss cheese pattern of holes is left in the residual biofilm.

  7. Analysis of machining and machine tools

    CERN Document Server

    Liang, Steven Y

    2016-01-01

    This book delivers the fundamental science and mechanics of machining and machine tools by presenting systematic and quantitative knowledge in the form of process mechanics and physics. It gives readers a solid command of machining science and engineering, and familiarizes them with the geometry and functionality requirements of creating parts and components in today’s markets. The authors address traditional machining topics, such as: single and multiple point cutting processes grinding components accuracy and metrology shear stress in cutting cutting temperature and analysis chatter They also address non-traditional machining, such as: electrical discharge machining electrochemical machining laser and electron beam machining A chapter on biomedical machining is also included. This book is appropriate for advanced undergraduate and graduate mechani cal engineering students, manufacturing engineers, and researchers. Each chapter contains examples, exercises and their solutions, and homework problems that re...

  8. Automation of printing machine

    OpenAIRE

    Sušil, David

    2016-01-01

    Bachelor thesis is focused on the automation of the printing machine and comparing the two types of printing machines. The first chapter deals with the history of printing, typesettings, printing techniques and various kinds of bookbinding. The second chapter describes the difference between sheet-fed printing machines and offset printing machines, the difference between two representatives of rotary machines, technological process of the products on these machines, the description of the mac...

  9. Swiss multinational enterprises and transnational corruption: management matters

    OpenAIRE

    Bueno,N.

    2017-01-01

    In 2016, the Office of the Attorney General of Switzerland sanctioned a Swiss corporation for having bribed a Libyan Minister. The same year, it opened a criminal proceeding against the Swiss bank BSI for its involvement in the corruption scandals surrounding the Malaysian company 1MDB. Swiss corporations are also currently under investigation in the Brazilian Petrobras scandal. At the international level, anti-corruption treaties encourage states to make corporations criminally liable for tr...

  10. Machine musicianship

    Science.gov (United States)

    Rowe, Robert

    2002-05-01

    The training of musicians begins by teaching basic musical concepts, a collection of knowledge commonly known as musicianship. Computer programs designed to implement musical skills (e.g., to make sense of what they hear, perform music expressively, or compose convincing pieces) can similarly benefit from access to a fundamental level of musicianship. Recent research in music cognition, artificial intelligence, and music theory has produced a repertoire of techniques that can make the behavior of computer programs more musical. Many of these were presented in a recently published book/CD-ROM entitled Machine Musicianship. For use in interactive music systems, we are interested in those which are fast enough to run in real time and that need only make reference to the material as it appears in sequence. This talk will review several applications that are able to identify the tonal center of musical material during performance. Beyond this specific task, the design of real-time algorithmic listening through the concurrent operation of several connected analyzers is examined. The presentation includes discussion of a library of C++ objects that can be combined to perform interactive listening and a demonstration of their capability.

  11. Asymmetric Swiss-cheese brane-worlds

    CERN Document Server

    Gergely, L A; K\\'{e}p\\'{\\i}r\\'{o}, Ibolya

    2006-01-01

    We consider Swiss-cheese brane universes embedded asymmetrically into the bulk. Neither the junction conditions between the Schwarzschild spheres and the sorrounding Friedmann brane regions with cosmological constant $\\Lambda $, nor the evolution of the scale factor are changed with respect to the symmetric case. The universe expands and decelerates forever. The asymmetry however has a drastic influence on the evolution of the cosmological fluid. Instead of the two branches of the symmetric case, in the asymmetric case four branches emerge. Moreover, the future pressure singularity arising in the symmetric case only for huge values of $\\Lambda $ becomes quite generic in the asymmetric case. Such pressure singularities emerge also when $\\Lambda=0$ is set. Then they are due entirely to the asymmetric embedding. For generic values of $\\Lambda $ we introduce a critical value of a suitably defined asymmetry parameter, which separates Swiss-cheese cosmologies with and without pressure singularities.

  12. No Swiss-cheese on the brane

    CERN Document Server

    Gergely, L A

    2004-01-01

    We study the possibility of brane-world generalization of the Einstein-Straus Swiss-cheese cosmological model. We find that the modifications induced by the brane-world scenario are excessively restrictive. At a first glance only the motion of the boundary is modified and the fluid in the exterior region is allowed to have pressure. The general relativistic Einstein-Straus model emerges in the low density limit. However by imposing that the central mass in the Schwarzschild voids is constant, a combination of the junction conditions and modified cosmological evolution leads to the conclusion that the brane is flat. Thus no generic Swiss-cheese universe can exist on the brane. The conclusion is not altered by the introduction of a cosmological constant in the FLRW regions. This shows that although allowed in the low density limit, the Einstein-Straus universe cannot emerge from cosmological evolution in the brane-world scenario.

  13. Hot cheese: a processed Swiss cheese model.

    Science.gov (United States)

    Li, Y; Thimbleby, H

    2014-01-01

    James Reason's classic Swiss cheese model is a vivid and memorable way to visualise how patient harm happens only when all system defences fail. Although Reason's model has been criticised for its simplicity and static portrait of complex systems, its use has been growing, largely because of the direct clarity of its simple and memorable metaphor. A more general, more flexible and equally memorable model of accident causation in complex systems is needed. We present the hot cheese model, which is more realistic, particularly in portraying defence layers as dynamic and active - more defences may cause more hazards. The hot cheese model, being more flexible, encourages deeper discussion of incidents than the simpler Swiss cheese model permits.

  14. Generalized Swiss-cheese cosmologies: Mass scales

    Science.gov (United States)

    Grenon, Cédric; Lake, Kayll

    2010-01-01

    We generalize the Swiss-cheese cosmologies so as to include nonzero linear momenta of the associated boundary surfaces. The evolution of mass scales in these generalized cosmologies is studied for a variety of models for the background without having to specify any details within the local inhomogeneities. We find that the final effective gravitational mass and size of the evolving inhomogeneities depends on their linear momenta but these properties are essentially unaffected by the details of the background model.

  15. The Swiss nuclear installations. Annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Surveillance of the Swiss nuclear installations with regard to nuclear safety, including radiation protection, is among the tasks of the Swiss Federal Nuclear Safety Inspectorate (HSK). Five nuclear power plants are operational in Switzerland: the three units Beznau I and II and Muehleberg with electrical capacities in the range of 300 to 400 MWe, and the two units Goesgen and Leibstadt with capacities between 900 and 1200 MWe. These are light water reactors; at Beznau and Goesgen of the PWR type, and at Muehleberg and Leibstadt of the BWR type. Research reactors of thermal capacities below 10 MWth are operational at the Paul Scherrer Institute (PSI), at the Swiss Federal Institute of Technology Lausanne and at the University of Basel. Further subject to HSK`s supervision are all activities at PSI involving nuclear fuel or ionizing radiation, the shut-down experimental reactor of Lucens, the exploration, in Switzerland, of final disposal facilities for radwaste and the interim radwaste storage facilities. The report first deals with the nuclear power and covers, in individual sections, the aspects of installation safety, radiation protection as well as personnel and organization, and the resulting overall impression from the point of view of HSK. In chapter 5, the corresponding information is given for research installations. Chapter 6, on radwaste disposal, is dedicated to the treatment of waste, waste from reprocessing, interim storage and exploration by NAGRA. In chapter 7, the status of emergency planning in the nuclear power plants` proximity is reported. Certificates issued for the transport of radioactive materials are dealt with in chapter 8. Finally chapter 9 goes into general questions relating to the safety of nuclear installations. All in all, the safety of operation of the Swiss nuclear installations, in the period of 1994, is judged as good by HSK. (author) 11 figs., 13 tabs.

  16. The Swiss nuclear installations. Annual report 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-08-01

    Surveillance of the Swiss nuclear installations with regard to nuclear safety, including radiation protection, is among the tasks of the Swiss Federal Nuclear Safety Inspectorate (HSK). Five nuclear power plants are operational in Switzerland: the three units Beznau I and II and Muehleberg with electrical capacities in the range of 300 to 400 MWe, and the two units Goesgen and Leibstadt with capacities between 900 and 1200 MWe. These are light water reactors; at Beznau and Goesgen of the PWR type, and at Muehleberg and Leibstadt of the BWR type. Research reactors of thermal capacities below 10 MWth are operational at the Paul Scherrer Institute (PSI), at the Swiss Federal Institute of Technology Lausanne and at the University of Basel. Further subject to HSK`s supervision are all activities at PSI involving nuclear fuel or ionizing radiation, the shut-down experimental reactor of Lucens, the exploration of final disposal facilities for radwaste and the interim radwaste storage facilities in Switzerland. The report first deals with the nuclear power and covers, in individual sections, the aspects of installation safety, radiation protection as well as personnel and organization, and the resulting overall impression from the point of view of HSK. In chapter 5, the corresponding information is given for research installations. Chapter 6, on radwaste disposal, is dedicated to the treatment of waste, waste from reprocessing, interim storage and exploration by NAGRA. In chapter 7, the status of emergency planning in the nuclear power plants` proximity is reported. Certificates issued for the transport of radioactive materials are dealt with in chapter 8. Finally chapter 9 goes into general questions relating to the safety of nuclear installations. All in all, the safety of operation of the Swiss nuclear installations, in the period of 1993, is judged as good by HSK. (author) 10 figs., 11 tabs.

  17. Gross revenue risk in Swiss dairy farming.

    Science.gov (United States)

    El Benni, N; Finger, R

    2013-02-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how output prices and yields contributed to revenue risk over 3 different periods: the whole period (1990-2009), the first decade (1990-1999), and the second decade (1999-2009). In addition, the effect of expected changes in animal-based support for roughage-consuming cattle and price volatility on revenue risk was evaluated using a simulation model. Prices were the main contributor to revenue risk, even if the importance of yield risk increased over time. Swiss dairy producers can profit from natural hedge but market deregulation and market liberalization have reduced the natural hedge at the farm level. An increase in price volatility would substantially increase revenue risk and would, together with the abandonment of direct payments, reduce the comparative advantage of dairy production for risk-averse decision makers. Depending on other available risk management strategies, price risk management instruments might be a valuable solution for Swiss dairy producers in the future.

  18. The development of the Swiss Adaptation Strategy

    Science.gov (United States)

    Hohmann, R.; Köllner-Heck, P.; Probst, T.

    2010-09-01

    In summer 2009, the Federal Council mandated the Departement of the Environment, Transport, Energy and Communication (DETEC) to develop a Swiss adaptation strategy. This strategy aims to coordinate the efforts of all federal departments involved in adaptation, and to provide them with the necessary basic information. For the development of the Swiss adaptation strategy the following principles are fundamental. (1.) The strategy aims to achieve the overarching objectives of harnessing the opportunities that climate change presents, minimizing the risks of climate change to people and assets, and to increases the adaptive capacity of all resources. (2) The strategy is based on the most recent scientific knowledge about climate change and climate change impacts. (3.) It is based in on a sound and comprehensive analysis of climate change risks. (4.) It includes strategic goals for the sectors that are most vulnerable to climate change, i.e., water management, biodiversity management, agriculture, forestry, natural hazard prevention, health care, energy generation, tourism, land use. (5.) It thoroughly analyzes the interfaces between the sectoral strategies in order solve existing conflicts and profit form existing synergies. The Swiss Adaptation Strategy will be completed and submitted to the Federal Council by the End of 2011.

  19. Electrical machines mathematical fundamentals of machine topologies

    CERN Document Server

    Gerling, Dieter

    2015-01-01

    Electrical Machines and Drives play a powerful role in industry with an ever increasing importance. This fact requires the understanding of machine and drive principles by engineers of many different disciplines. Therefore, this book is intended to give a comprehensive deduction of these principles. Special attention is given to the precise mathematical derivation of the necessary formulae to calculate machines and drives and to the discussion of simplifications (if applied) with the associated limits. The book shows how the different machine topologies can be deduced from general fundamentals, and how they are linked together. This book addresses graduate students, researchers, and developers of Electrical Machines and Drives, who are interested in getting knowledge about the principles of machine and drive operation and in detecting the mathematical and engineering specialties of the different machine and drive topologies together with their mutual links. The detailed - but nevertheless compact - mat...

  20. Laser machining of advanced materials

    CERN Document Server

    Dahotre, Narendra B

    2011-01-01

    Advanced materialsIntroductionApplicationsStructural ceramicsBiomaterials CompositesIntermetallicsMachining of advanced materials IntroductionFabrication techniquesMechanical machiningChemical Machining (CM)Electrical machiningRadiation machining Hybrid machiningLaser machiningIntroductionAbsorption of laser energy and multiple reflectionsThermal effectsLaser machining of structural ceramicsIntrodu

  1. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    production. In Kafka: Toward a Minor Literature, Deleuze and Guatari gave the most comprehensive explanation to the abstract machine in the work of art. Like the war-machines of Virilio, the Kafka-machine operates in three gears or speeds. Furthermore, the machine is connected to spatial diagrams...

  2. Development and application of multi-functional continuous scouring-bleaching machine for knitted fabrics%针织物多功能连续化练漂机的研制及应用技术

    Institute of Scientific and Technical Information of China (English)

    徐维敬; 刘琳

    2013-01-01

    The structure, operating principle, technological process and application Characteristics of LME012 multi-functional continual scouring-bleaching machine for knitted fabrics are introduced. This machine can be used not only for open-width process of cylindrical knitted fabrics, but also for rope process of cylindrical and open width fabrics. It is also applicable to relaxing continuous scouring-bleaching process for various knitted and woven fabrics of cotton and its blended fabrics and synthetic fibers. Fabrics soured and bleached by this machine exhibit stable scouring-bleaching effects (whiteness, capillary effect, fiber damage), excellent surface effects (no crease, no scratches, non-fluff, etc.) and dimensional stability. Additionally, water, electricity, steam consumption and discharge of sewage can be drastically decreased. Working intensity and labor are also reduced.%介绍了LME012型针织物多功能练漂机的构造、工作原理、工艺流程和应用特点。该机既能用于筒状针织物的平幅加工,又能用于筒状和开幅织物的绳状加工,能适应棉及其混纺交织、化纤等各种针织物、机织物的松式连续练漂加工。应用该机练漂不仅能获得稳定的练漂效果(白度、毛效、纤维损伤)、优良的布面效果(无折痕、无擦伤、不起毛羽等)以及尺寸稳定性,还能大幅度地降低水、电、汽的消耗量、减少污水排放量,减轻劳动强度和减少用工等。

  3. Radiation protection in Swiss nuclear installations; Strahlenschutz in Schweizer Kernanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, J.; Brunell, M. [Eidgenoessisches Nuklearsicherheitsinspektorat ENSI, Brugg (Switzerland)

    2015-07-01

    Well developed measures on operational radiation protection within Swiss nuclear installations will be presented. The focus lays on competent authority actions. Results of the last ten years, including events on radiation issues, will be discussed. Finally a view on challenges for radiation protection personnel with respect to a renewed Swiss radiation protection legislation based on recent ICRP recommendations will be given.

  4. CERN receives early 50th anniversary present from Swiss Confederation

    CERN Multimedia

    2003-01-01

    "Swiss President Pascal Couchepin announced Wednesday 4 June an early 50th birthday present from the Swiss Confederation to CERN. Switzerland has decided to offer the laboratory the 'Palais de l'Equilibre', a landmark building designed by Geneva architects for Switzerland's 2002 national exhibition" (1/2 page).

  5. ATLAS Computing on the Swiss Cloud SWITCHengines

    CERN Document Server

    Haug, Sigve; The ATLAS collaboration

    2016-01-01

    Consolidation towards more computing at flat budgets beyond what pure chip technology can offer, is a requirement for the full scientific exploitation of the future data from the Large Hadron Collider. One consolidation measure is to exploit cloud infrastructures whenever they are financially competitive. We report on the technical solutions and the performance used and achieved running ATLAS production on SWITCHengines. SWITCHengines is the new cloud infrastructure offered to Swiss academia by the National Research and Education Network SWITCH. While solutions and performances are general, financial considerations and policies, which we also report on, are country specific.

  6. ATLAS computing on Swiss Cloud SWITCHengines

    CERN Document Server

    Haug, Sigve; The ATLAS collaboration

    2017-01-01

    Consolidation towards more computing at flat budgets beyond what pure chip technology can offer, is a requirement for the full scientific exploitation of the future data from the Large Hadron Collider at CERN in Geneva. One consolidation measure is to exploit cloud infrastructures whenever they are financially competitive. We report on the technical solutions and the performances used and achieved running simulation tasks for the ATLAS experiment on SWITCHengines. SWITCHengines is a new infrastructure as a service offered to Swiss academia by the National Research and Education Network SWITCH. While solutions and performances are general, financial considerations and policies, on which we also report, are country specific.

  7. Machine tool structures

    CERN Document Server

    Koenigsberger, F

    1970-01-01

    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

  8. High-temperature superconductors in electrical machines and generators in particular; Hochtemperatur-Supraleiter in elektrischen Maschinen, insbesondere Generatoren

    Energy Technology Data Exchange (ETDEWEB)

    Joho, R. [Alstom (Schweiz) AG, Birr (Switzerland)

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a study that looked at the advantages and disadvantages of large electrical machines with superconductor windings. The study, which was divided into three phases, first made a survey of other current projects, continued to define a benchmark for the current state of the market and, finally, defined an 'action plan' that lists various possibilities for the continuation of the project. High-temperature superconductor technology is described and its application in electrical machines is discussed. Examples are given of electrical machines that use superconductor technology.

  9. Design of Demining Machines

    CERN Document Server

    Mikulic, Dinko

    2013-01-01

    In constant effort to eliminate mine danger, international mine action community has been developing safety, efficiency and cost-effectiveness of clearance methods. Demining machines have become necessary when conducting humanitarian demining where the mechanization of demining provides greater safety and productivity. Design of Demining Machines describes the development and testing of modern demining machines in humanitarian demining.   Relevant data for design of demining machines are included to explain the machinery implemented and some innovative and inspiring development solutions. Development technologies, companies and projects are discussed to provide a comprehensive estimate of the effects of various design factors and to proper selection of optimal parameters for designing the demining machines.   Covering the dynamic processes occurring in machine assemblies and their components to a broader understanding of demining machine as a whole, Design of Demining Machines is primarily tailored as a tex...

  10. Applied machining technology

    CERN Document Server

    Tschätsch, Heinz

    2010-01-01

    Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

  11. Machining with abrasives

    CERN Document Server

    Jackson, Mark J

    2011-01-01

    Abrasive machining is key to obtaining the desired geometry and surface quality in manufacturing. This book discusses the fundamentals and advances in the abrasive machining processes. It provides a complete overview of developing areas in the field.

  12. Women, Men, and Machines.

    Science.gov (United States)

    Form, William; McMillen, David Byron

    1983-01-01

    Data from the first national study of technological change show that proportionately more women than men operate machines, are more exposed to machines that have alienating effects, and suffer more from the negative effects of technological change. (Author/SSH)

  13. Machine medical ethics

    CERN Document Server

    Pontier, Matthijs

    2015-01-01

    The essays in this book, written by researchers from both humanities and sciences, describe various theoretical and experimental approaches to adding medical ethics to a machine in medical settings. Medical machines are in close proximity with human beings, and getting closer: with patients who are in vulnerable states of health, who have disabilities of various kinds, with the very young or very old, and with medical professionals. In such contexts, machines are undertaking important medical tasks that require emotional sensitivity, knowledge of medical codes, human dignity, and privacy. As machine technology advances, ethical concerns become more urgent: should medical machines be programmed to follow a code of medical ethics? What theory or theories should constrain medical machine conduct? What design features are required? Should machines share responsibility with humans for the ethical consequences of medical actions? How ought clinical relationships involving machines to be modeled? Is a capacity for e...

  14. Brain versus Machine Control.

    Directory of Open Access Journals (Sweden)

    Jose M Carmena

    2004-12-01

    Full Text Available Dr. Octopus, the villain of the movie "Spiderman 2", is a fusion of man and machine. Neuroscientist Jose Carmena examines the facts behind this fictional account of a brain- machine interface

  15. Swiss identity smells like chocolate: Social identity shapes olfactory judgments.

    Science.gov (United States)

    Coppin, Géraldine; Pool, Eva; Delplanque, Sylvain; Oud, Bastiaan; Margot, Christian; Sander, David; Van Bavel, Jay J

    2016-10-11

    There is extensive evidence that social identities can shape people's attitudes and behavior, but what about sensory judgments? We examined the possibility that social identity concerns may also shape the judgment of non-social properties-namely, olfactory judgment. In two experiments, we presented Swiss and non-Swiss participants with the odor of chocolate, for which Switzerland is world-famous, and a control odor (popcorn). Swiss participants primed with Swiss identity reported the odor of chocolate (but not popcorn) as more intense than non-Swiss participants (Experiments 1 and 2) and than Swiss participants primed with individual identity or not primed (Experiment 2). The self-reported intensity of chocolate smell tended to increase as identity accessibility increased-but only among Swiss participants (Experiment 1). These results suggest that identity priming can counter-act classic sensory habituation effects, allowing identity-relevant smells to maintain their intensity after repeated presentations. This suggests that social identity dynamically influences sensory judgment. We discuss the potential implications for models of social identity and chemosensory perception.

  16. The Swiss Institute for Nuclear Research SIN

    CERN Document Server

    Pritzker, Andreas

    2014-01-01

    This book tells the story of the Swiss Institute for Nuclear Research (SIN). The institute was founded in 1968 and became part of the Paul Scherrer Institute (PSI) in 1988. Its founding occurred at a time when physics was generally considered the key discipline for technological and social development. This step was unusual for a small country like Switzerland and showed courage and foresight. Equally unusual were the accomplishments of SIN, compared with similar institutes in the rest of the world, as well as its influence on Swiss, and partially also on international politics of science. That this story is now available in a widely understandable form is due to the efforts of some physicists, who took the initiative as long as contemporary witnesses could still be questioned. As is usually the case, official documents always show just an excerpt of what really happened. An intimate portrayal of people who contributed to success requires personal memories. This text relies on both sources. In addition, the e...

  17. Replacement of Swiss "Attestations de fonctions"

    CERN Multimedia

    DG Unit

    2009-01-01

    The Swiss Permanent Mission has informed CERN that the "attestations de fonctions" issued to certain members of the personnel and the "attestations" issued to their family members will gradually be replaced by P-type "cartes de légitimation" (see specimen copies in the printed Bulletin). This card’s name, together with its more contemporary design compared with old-style "Attestations" issued in the 1970s, will make the holder’s daily life much easier, e.g. when crossing borders, renting accommodation or setting up a telephone line. The Users Office (PH Department) and the Cards Office (HR Department), which are responsible for handling requests for "cartes de légitimation", will provide information in due course on how they intend to organise the exchange of "attestations" (priority will be given to residents of Switzerland, in particular those requiring a visa for the Schengen area). In this context, we remind you that the Swiss Permanent Mission is systematically in...

  18. [Historic treasures of Swiss horse breeding].

    Science.gov (United States)

    Meier, H

    2017-01-01

    Both a mandate of the Bernese Government (1705) and statements in the Georgica Helvetica of 1706 prove that Swiss horse breeding was lucrative and of good quality at that time. However, the political turmoil at the transition from the 18th to 19th century and excessive sales to France and Italy led to a severe drop in quantity as well in quality. The exhibition of horses in Aarau in 1865 showed a wretched state of the material. In the same year, Rudolf Zangger wrote a guide for the discussion of horse breeding in Switzerland. In the following year (1866), Johann Jakob Rychner published a report on horse breeding, and a further treatise on Swiss horse breeding by Johann Heinrich Hirzel followed in 1883. These publications created good and comprehensive fundamentals, which can still be considered valid. However history shows that the results and recommendations of these analyses barely led to improvements. Todays genomics with their possibilities open up a new era of animal breeding and raise bigger demands than ever.

  19. Paul Scherrer Institute Scientific Report 1999. Volume VII: Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Weyer, Heinz Josef; Bugmann, Marlen; Schuetz, Christine [eds.

    2000-07-01

    The Swiss Synchrotron Light Source (SLS) is a medium energy range light source that also provides light with high brilliance in the regime of hard X-rays. It is being constructed at PSI and scheduled to be operational in 2001. The progress of the construction of pre-injector, booster and storage ring as well as some of the details of new features that were adopted for the design and operation of this machine, are described in this annual report for 1999. An overview of the concept and status of the four SLS beamlines and the related infrastructure is also given. The last chapter contains 11 contributions which report on scientific activities of SLS staff members at synchrotron radiation facilities all over the world.

  20. A Universal Reactive Machine

    DEFF Research Database (Denmark)

    Andersen, Henrik Reif; Mørk, Simon; Sørensen, Morten U.

    1997-01-01

    Turing showed the existence of a model universal for the set of Turing machines in the sense that given an encoding of any Turing machine asinput the universal Turing machine simulates it. We introduce the concept of universality for reactive systems and construct a CCS processuniversal...

  1. Asynchronized synchronous machines

    CERN Document Server

    Botvinnik, M M

    1964-01-01

    Asynchronized Synchronous Machines focuses on the theoretical research on asynchronized synchronous (AS) machines, which are "hybrids” of synchronous and induction machines that can operate with slip. Topics covered in this book include the initial equations; vector diagram of an AS machine; regulation in cases of deviation from the law of full compensation; parameters of the excitation system; and schematic diagram of an excitation regulator. The possible applications of AS machines and its calculations in certain cases are also discussed. This publication is beneficial for students and indiv

  2. Quantum machine learning.

    Science.gov (United States)

    Biamonte, Jacob; Wittek, Peter; Pancotti, Nicola; Rebentrost, Patrick; Wiebe, Nathan; Lloyd, Seth

    2017-09-13

    Fuelled by increasing computer power and algorithmic advances, machine learning techniques have become powerful tools for finding patterns in data. Quantum systems produce atypical patterns that classical systems are thought not to produce efficiently, so it is reasonable to postulate that quantum computers may outperform classical computers on machine learning tasks. The field of quantum machine learning explores how to devise and implement quantum software that could enable machine learning that is faster than that of classical computers. Recent work has produced quantum algorithms that could act as the building blocks of machine learning programs, but the hardware and software challenges are still considerable.

  3. Precision machine design

    CERN Document Server

    Slocum, Alexander H

    1992-01-01

    This book is a comprehensive engineering exploration of all the aspects of precision machine design - both component and system design considerations for precision machines. It addresses both theoretical analysis and practical implementation providing many real-world design case studies as well as numerous examples of existing components and their characteristics. Fast becoming a classic, this book includes examples of analysis techniques, along with the philosophy of the solution method. It explores the physics of errors in machines and how such knowledge can be used to build an error budget for a machine, how error budgets can be used to design more accurate machines.

  4. The Swiss Society of Experimental Pharmacology in Times of Change.

    Science.gov (United States)

    Weitz-Schmidt, Gabriele; Rüegg, Urs

    2016-12-21

    Experimental pharmacology is undergoing fundamental changes. This article describes the challenges and opportunities associated with these changes from the perspective of the Swiss Society of Pharmacology (SSEP), the society which aims to advance experimental pharmacology in Switzerland and abroad.

  5. Wind energy and Swiss hydroelectric power; Windenergie und schweizerischer Wasserkraftpark

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Baur, M. [Econcept AG, Zuerich (Switzerland); Fritz, W.; Zimmer, Ch.; Feldmann, J. [Consentec GmbH, Aachen (Germany); Haubrich, H.-J.; Dany, G.; Schmoeller, H.; Hartmann, T. [Institut fuer Elektrische Anlagen und Energiewirtschaft RWTH Aachen (IAEW), Aachen (Germany)

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made to analyse the possible changes in the European electricity supply system, in particular with reference to the increasing amount of wind-generated electricity. Also, the role of peak-power and the optimisation potential for Swiss hydropower was examined. The part to be played by Swiss wind power in the future and the government's sustainability strategy is also looked at. The report looks at electricity dealing in the European context and introduces a method of assessment for Swiss hydropower. The report's conclusions and recommendations cover the increasing importance of energy storage in hydropower schemes, the question if grid capacity is sufficient under the new conditions, the market liberalisation question and possible ecological problems that may be encountered.

  6. Swiss-Cheese Gravitino Dark Matter

    Energy Technology Data Exchange (ETDEWEB)

    Misra, Aalok

    2014-06-15

    We present a phenomenological model which we show can be obtained as a local realization of large volume D3/D7μ-Split SUSY on a nearly special Lagrangian three-cycle embedded in the big divisor of a Swiss-Cheese Calabi-Yau [Mansi Dhuria, Aalok Misra, (arXiv:1207.2774 [hep-ph]), Nucl. Phys. B867 (2013) 636–748]. After identification of the first generation of SM leptons and quarks with fermionic super-partners of four Wilson line moduli, we discuss the identification of gravitino as a potential dark matter candidate. We also show that it is possible to obtain a 125 GeV light Higgs in our setup.

  7. Replacement of Swiss "Attestations de fonctions"

    CERN Multimedia

    DG Unit

    2009-01-01

    The Swiss Permanent Mission has informed CERN that the "attestations de fonctions" issued to certain members of the personnel and the "attestations" issued to their family members will gradually be replaced by P-type "cartes de légitimation" (see specimen copies below). This card’s name, together with its more contemporary design compared with old-style "Attestations" issued in the 1970s, will make the holder’s daily life much easier, e.g. when crossing borders, renting accommodation or setting up a telephone line. The Users Office (PH Department) and the Cards Office (HR Department), which are responsible for handling requests for "cartes de légitimation", will provide information in due course on how they intend to organise the exchange of "attestations" (priority will be given to residents of Switzerland, in parti...

  8. The ``Swiss cheese'' instability of bacterial biofilms

    Science.gov (United States)

    Jang, Hongchul; Rusconi, Roberto; Stocker, Roman

    2012-11-01

    Bacteria often adhere to surfaces, where they develop polymer-encased communities (biofilms) that display dramatic resistance to antibiotic treatment. A better understanding of cell detachment from biofilms may lead to novel strategies for biofilm disruption. Here we describe a new detachment mode, whereby a biofilm develops a nearly regular array of ~50-100 μm holes. Using surface-treated microfluidic devices, we create biofilms of controlled shape and size. After the passage of an air plug, the break-up of the residual thin liquid film scrapes and rearranges bacteria on the surface, such that a ``Swiss cheese'' pattern is left in the residual biofilm. Fluorescent staining of the polymeric matrix (EPS) reveals that resistance to cell dislodgement correlates with local biofilm age, early settlers having had more time to hunker down. Because few survivors suffice to regrow a biofilm, these results point at the importance of considering microscale heterogeneity in assessing the effectiveness of biofilm removal strategies.

  9. Lateglacial environmental variability from Swiss tree rings

    DEFF Research Database (Denmark)

    Schaub, Matthias; Büntgen, Ulf; Kaiser, Klaus Felix

    2008-01-01

    Evidence of annually resolved environmental variations during the Allerød interstadial is presented using 81 fossil Scots pine tree-ring series from Gaenziloo and Landikon, near Zurich, Switzerland. The absolute age of the trees ranges between 11,920 and 10,610 14C BP, which was determined...... by wiggle-matching radiocarbon ages to the Cariaco 14C data set. From the two sites we created a composite floating Allerød chronology on the basis of their 632 years of overlap (r = 0.57), after individual spline detrending. Merging both data sets resulted in a Lateglacial tree-ring chronology covering...... 1050 years. Regional curve standardization (RCS) was applied to preserve low-frequency information. Growth behavior of the fossil trees was compared with a recent composite pine data set from the central Swiss Alps and reveals distinct differences. The new Allerød RCS chronology reveals major...

  10. Swiss Armed Forces Reform: Doctrinal and Organizational Challenges

    Science.gov (United States)

    2016-06-10

    second distinguishable trait of the Swiss political system. Swiss citizens can challenge any law with a referendum and amend the constitution with...can impose change to any political course of action. All the domains of the state have been subject to either a referendum or an initiative. The...grew from 11 percent in 1987, doubled to 22.5 percent in 1999, and in 2015 was at 29.4 percent.29 Additional initiatives and referendums halted the

  11. Food Color Induced Hepatotoxicity in Swiss Albino Rats, Rattus norvegicus

    OpenAIRE

    Saxena, Beenam; Sharma, Shiv

    2015-01-01

    Objective: Certain dietary constituents can induce toxicity and play a critical role in the development of several hepatic disorders. Tartrazine, metanil yellow and sunset yellow are widely used azo dyes in food products, so the present study is aimed to investigate the food color induced hepatotoxicity in Swiss albino rats. Materials and Methods: Swiss albino rats were divided into four groups, each group having six animals. Group I served as control, Group II, Group III and Group IV were ad...

  12. Perspex machine: VII. The universal perspex machine

    Science.gov (United States)

    Anderson, James A. D. W.

    2006-01-01

    The perspex machine arose from the unification of projective geometry with the Turing machine. It uses a total arithmetic, called transreal arithmetic, that contains real arithmetic and allows division by zero. Transreal arithmetic is redefined here. The new arithmetic has both a positive and a negative infinity which lie at the extremes of the number line, and a number nullity that lies off the number line. We prove that nullity, 0/0, is a number. Hence a number may have one of four signs: negative, zero, positive, or nullity. It is, therefore, impossible to encode the sign of a number in one bit, as floating-point arithmetic attempts to do, resulting in the difficulty of having both positive and negative zeros and NaNs. Transrational arithmetic is consistent with Cantor arithmetic. In an extension to real arithmetic, the product of zero, an infinity, or nullity with its reciprocal is nullity, not unity. This avoids the usual contradictions that follow from allowing division by zero. Transreal arithmetic has a fixed algebraic structure and does not admit options as IEEE, floating-point arithmetic does. Most significantly, nullity has a simple semantics that is related to zero. Zero means "no value" and nullity means "no information." We argue that nullity is as useful to a manufactured computer as zero is to a human computer. The perspex machine is intended to offer one solution to the mind-body problem by showing how the computable aspects of mind and, perhaps, the whole of mind relates to the geometrical aspects of body and, perhaps, the whole of body. We review some of Turing's writings and show that he held the view that his machine has spatial properties. In particular, that it has the property of being a 7D lattice of compact spaces. Thus, we read Turing as believing that his machine relates computation to geometrical bodies. We simplify the perspex machine by substituting an augmented Euclidean geometry for projective geometry. This leads to a general

  13. Machinability of advanced materials

    CERN Document Server

    Davim, J Paulo

    2014-01-01

    Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters.  A variety of factors determine a material's machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

  14. Pattern recognition & machine learning

    CERN Document Server

    Anzai, Y

    1992-01-01

    This is the first text to provide a unified and self-contained introduction to visual pattern recognition and machine learning. It is useful as a general introduction to artifical intelligence and knowledge engineering, and no previous knowledge of pattern recognition or machine learning is necessary. Basic for various pattern recognition and machine learning methods. Translated from Japanese, the book also features chapter exercises, keywords, and summaries.

  15. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  16. Machining of titanium alloys

    CERN Document Server

    2014-01-01

    This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

  17. Rotating electrical machines

    CERN Document Server

    Le Doeuff, René

    2013-01-01

    In this book a general matrix-based approach to modeling electrical machines is promulgated. The model uses instantaneous quantities for key variables and enables the user to easily take into account associations between rotating machines and static converters (such as in variable speed drives).   General equations of electromechanical energy conversion are established early in the treatment of the topic and then applied to synchronous, induction and DC machines. The primary characteristics of these machines are established for steady state behavior as well as for variable speed scenarios. I

  18. Chaotic Boltzmann machines.

    Science.gov (United States)

    Suzuki, Hideyuki; Imura, Jun-ichi; Horio, Yoshihiko; Aihara, Kazuyuki

    2013-01-01

    The chaotic Boltzmann machine proposed in this paper is a chaotic pseudo-billiard system that works as a Boltzmann machine. Chaotic Boltzmann machines are shown numerically to have computing abilities comparable to conventional (stochastic) Boltzmann machines. Since no randomness is required, efficient hardware implementation is expected. Moreover, the ferromagnetic phase transition of the Ising model is shown to be characterised by the largest Lyapunov exponent of the proposed system. In general, a method to relate probabilistic models to nonlinear dynamics by derandomising Gibbs sampling is presented.

  19. Tribology in machine design

    CERN Document Server

    Stolarski, Tadeusz

    1999-01-01

    ""Tribology in Machine Design is strongly recommended for machine designers, and engineers and scientists interested in tribology. It should be in the engineering library of companies producing mechanical equipment.""Applied Mechanics ReviewTribology in Machine Design explains the role of tribology in the design of machine elements. It shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications within mechanical devices and systems.The computer offers today's designer the possibility of greater stringen

  20. Debugging the virtual machine

    Energy Technology Data Exchange (ETDEWEB)

    Miller, P.; Pizzi, R.

    1994-09-02

    A computer program is really nothing more than a virtual machine built to perform a task. The program`s source code expresses abstract constructs using low level language features. When a virtual machine breaks, it can be very difficult to debug because typical debuggers provide only low level machine implementation in formation to the software engineer. We believe that the debugging task can be simplified by introducing aspects of the abstract design into the source code. We introduce OODIE, an object-oriented language extension that allows programmers to specify a virtual debugging environment which includes the design and abstract data types of the virtual machine.

  1. Electrical machines & drives

    CERN Document Server

    Hammond, P

    1985-01-01

    Containing approximately 200 problems (100 worked), the text covers a wide range of topics concerning electrical machines, placing particular emphasis upon electrical-machine drive applications. The theory is concisely reviewed and focuses on features common to all machine types. The problems are arranged in order of increasing levels of complexity and discussions of the solutions are included where appropriate to illustrate the engineering implications. This second edition includes an important new chapter on mathematical and computer simulation of machine systems and revised discussions o

  2. Machine learning with R

    CERN Document Server

    Lantz, Brett

    2013-01-01

    Written as a tutorial to explore and understand the power of R for machine learning. This practical guide that covers all of the need to know topics in a very systematic way. For each machine learning approach, each step in the process is detailed, from preparing the data for analysis to evaluating the results. These steps will build the knowledge you need to apply them to your own data science tasks.Intended for those who want to learn how to use R's machine learning capabilities and gain insight from your data. Perhaps you already know a bit about machine learning, but have never used R; or

  3. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  4. Virtual machine vs Real Machine: Security Systems

    Directory of Open Access Journals (Sweden)

    Dr. C. Suresh Gnana Das

    2009-08-01

    Full Text Available This paper argues that the operating system and applications currently running on a real machine should relocate into a virtual machine. This structure enables services to be added below the operating system and to do so without trusting or modifying the operating system or applications. To demonstrate the usefulness of this structure, we describe three services that take advantage of it: secure logging, intrusion prevention and detection, and environment migration. In particular, we can provide services below the guest operating system without trusting or modifying it. We believe providing services at this layer are especially useful for enhancing security and mobility. This position paper describes the general benefits and challenges that arise from running most applications in a virtual machine, and then describes some example services and alternative ways to provide those services.

  5. Human behaviour towards climatic change during the 4th millennium BC in the Swiss Alpine forelands

    DEFF Research Database (Denmark)

    Karg, Sabine

    Human behaviour towards climatic change during the 4th millennium BC in the Swiss Alpine forelands.......Human behaviour towards climatic change during the 4th millennium BC in the Swiss Alpine forelands....

  6. Stirling machine operating experience

    Energy Technology Data Exchange (ETDEWEB)

    Ross, B. [Stirling Technology Co., Richland, WA (United States); Dudenhoefer, J.E. [Lewis Research Center, Cleveland, OH (United States)

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  7. Perpetual Motion Machine

    Directory of Open Access Journals (Sweden)

    D. Tsaousis

    2008-01-01

    Full Text Available Ever since the first century A.D. there have been relative descriptions of known devices as well as manufactures for the creation of perpetual motion machines. Although physics has led, with two thermodynamic laws, to the opinion that a perpetual motion machine is impossible to be manufactured, inventors of every age and educational level appear to claim that they have invented something «entirely new» or they have improved somebody else’s invention, which «will function henceforth perpetually»! However the fact of the failure in manufacturing a perpetual motion machine till now, it does not mean that countless historical elements for these fictional machines become indifferent. The discussion on every version of a perpetual motion machine on the one hand gives the chance to comprehend the inventor’s of each period level of knowledge and his way of thinking, and on the other hand, to locate the points where this «perpetual motion machine» clashes with the laws of nature and that’s why it is impossible to have been manufactured or have functioned. The presentation of a new «perpetual motion machine» has excited our interest to locate its weak points. According to the designer of it the machine functions with the work produced by the buoyant force

  8. Machine Intelligence and Explication

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    1987-01-01

    This report is an MA ("doctoraal") thesis submitted to the department of philosophy, university of Amsterdam. It attempts to answer the question whether machines can think by conceptual analysis. Ideally. a conceptual analysis should give plausible explications of the concepts of "machine" and "inte

  9. Microsoft Azure machine learning

    CERN Document Server

    Mund, Sumit

    2015-01-01

    The book is intended for those who want to learn how to use Azure Machine Learning. Perhaps you already know a bit about Machine Learning, but have never used ML Studio in Azure; or perhaps you are an absolute newbie. In either case, this book will get you up-and-running quickly.

  10. Reactive Turing machines

    NARCIS (Netherlands)

    Baeten, J.C.M.; Luttik, B.; Tilburg, P.J.A. van

    2013-01-01

    We propose reactive Turing machines (RTMs), extending classical Turing machines with a process-theoretical notion of interaction, and use it to define a notion of executable transition system. We show that every computable transition system with a bounded branching degree is simulated modulo diverge

  11. Machine Intelligence and Explication

    NARCIS (Netherlands)

    Wieringa, Roel

    1987-01-01

    This report is an MA ("doctoraal") thesis submitted to the department of philosophy, university of Amsterdam. It attempts to answer the question whether machines can think by conceptual analysis. Ideally. a conceptual analysis should give plausible explications of the concepts of "machine" and "inte

  12. Coordinate measuring machines

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with three exercises of 2 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercises concern three aspects of coordinate measuring: 1) Measuring and verification of tolerances on coordinate measuring machines, 2) Traceability...

  13. Simple Machine Junk Cars

    Science.gov (United States)

    Herald, Christine

    2010-01-01

    During the month of May, the author's eighth-grade physical science students study the six simple machines through hands-on activities, reading assignments, videos, and notes. At the end of the month, they can easily identify the six types of simple machine: inclined plane, wheel and axle, pulley, screw, wedge, and lever. To conclude this unit,…

  14. Human Machine Learning Symbiosis

    Science.gov (United States)

    Walsh, Kenneth R.; Hoque, Md Tamjidul; Williams, Kim H.

    2017-01-01

    Human Machine Learning Symbiosis is a cooperative system where both the human learner and the machine learner learn from each other to create an effective and efficient learning environment adapted to the needs of the human learner. Such a system can be used in online learning modules so that the modules adapt to each learner's learning state both…

  15. Machine learning with R

    CERN Document Server

    Lantz, Brett

    2015-01-01

    Perhaps you already know a bit about machine learning but have never used R, or perhaps you know a little R but are new to machine learning. In either case, this book will get you up and running quickly. It would be helpful to have a bit of familiarity with basic programming concepts, but no prior experience is required.

  16. 15 CFR 700.31 - Metalworking machines.

    Science.gov (United States)

    2010-01-01

    ... Drilling and tapping machines Electrical discharge, ultrasonic and chemical erosion machines Forging..., power driven Machining centers and way-type machines Manual presses Mechanical presses, power...

  17. LHC Report: machine development

    CERN Multimedia

    Rogelio Tomás García for the LHC team

    2015-01-01

    Machine development weeks are carefully planned in the LHC operation schedule to optimise and further study the performance of the machine. The first machine development session of Run 2 ended on Saturday, 25 July. Despite various hiccoughs, it allowed the operators to make great strides towards improving the long-term performance of the LHC.   The main goals of this first machine development (MD) week were to determine the minimum beam-spot size at the interaction points given existing optics and collimation constraints; to test new beam instrumentation; to evaluate the effectiveness of performing part of the beam-squeezing process during the energy ramp; and to explore the limits on the number of protons per bunch arising from the electromagnetic interactions with the accelerator environment and the other beam. Unfortunately, a series of events reduced the machine availability for studies to about 50%. The most critical issue was the recurrent trip of a sextupolar corrector circuit –...

  18. Micro-machining.

    Science.gov (United States)

    Brinksmeier, Ekkard; Preuss, Werner

    2012-08-28

    Manipulating bulk material at the atomic level is considered to be the domain of physics, chemistry and nanotechnology. However, precision engineering, especially micro-machining, has become a powerful tool for controlling the surface properties and sub-surface integrity of the optical, electronic and mechanical functional parts in a regime where continuum mechanics is left behind and the quantum nature of matter comes into play. The surprising subtlety of micro-machining results from the extraordinary precision of tools, machines and controls expanding into the nanometre range-a hundred times more precise than the wavelength of light. In this paper, we will outline the development of precision engineering, highlight modern achievements of ultra-precision machining and discuss the necessity of a deeper physical understanding of micro-machining.

  19. Introduction to machine learning.

    Science.gov (United States)

    Baştanlar, Yalin; Ozuysal, Mustafa

    2014-01-01

    The machine learning field, which can be briefly defined as enabling computers make successful predictions using past experiences, has exhibited an impressive development recently with the help of the rapid increase in the storage capacity and processing power of computers. Together with many other disciplines, machine learning methods have been widely employed in bioinformatics. The difficulties and cost of biological analyses have led to the development of sophisticated machine learning approaches for this application area. In this chapter, we first review the fundamental concepts of machine learning such as feature assessment, unsupervised versus supervised learning and types of classification. Then, we point out the main issues of designing machine learning experiments and their performance evaluation. Finally, we introduce some supervised learning methods.

  20. Dialect Effects in Speech Perception: The Role of Vowel Duration in Parisian French and Swiss French

    Science.gov (United States)

    Miller, Joanne L.; Mondini, Michele; Grosjean, Francois; Dommergues, Jean-Yves

    2011-01-01

    The current experiments examined how native Parisian French and native Swiss French listeners use vowel duration in perceiving the /[openo]/-/o/ contrast. In both Parisian and Swiss French /o/ is longer than /[openo]/, but the difference is relatively large in Swiss French and quite small in Parisian French. In Experiment 1 we found a parallel…

  1. INFLUENCE OF MICROBIOTA IN EXPERIMENTAL CUTANEOUS LEISHMANIASIS IN SWISS MICE

    Directory of Open Access Journals (Sweden)

    OLIVEIRA Marcia Rosa de

    1999-01-01

    Full Text Available Infection of Swiss/NIH mice with Leishmania major was compared with infection in isogenic resistant C57BL/6 and susceptible BALB/c mice. Swiss/NIH mice showed self-controlled lesions in the injected foot pad. The production of high levels of interferon-g (IFN-g and low levels of interleukin-4 (IL-4 by cells from these animals suggests that they mount a Th1-type immune response. The importance of the indigenous microbiota on the development of murine leishmaniasis was investigated by infecting germfree Swiss/NIH in the hind footpad with L. major and conventionalizing after 3 weeks of infection. Lesions from conventionalized Swiss/NIH mice were significantly larger than conventional mice. Histopathological analysis of lesions from conventionalized animals showed abscesses of variable shapes and sizes and high numbers of parasitized macrophages. In the lesions from conventional mice, besides the absence of abscess formation, parasites were rarely observed. On the other hand, cells from conventional and conventionalized mice produced similar Th1-type response characterized by high levels of IFN-g and low levels of IL-4. In this study, we demonstrated that Swiss/NIH mice are resistant to L. major infection and that the absence of the normal microbiota at the beginning of infection significantly influenced the lesion size and the inflammatory response at the site of infection.

  2. Asymmetric Swiss-cheese brane-worlds

    Science.gov (United States)

    Gergely, László Á.; Képíró, Ibolya

    2007-07-01

    We study a brane-world cosmological scenario with local inhomogeneities represented by black holes. The brane is asymmetrically embedded into the bulk. The black strings/cigars penetrating the Friedmann brane generate a Swiss-cheese-type structure. This universe forever expands and decelerates, as its general relativistic analogue. The evolution of the cosmological fluid, however, can proceed along four branches, two allowed to have positive energy density, and one of them having the symmetric embedding limit. On this branch a future pressure singularity can arise for either (a) a difference in the cosmological constants of the cosmological and black hole brane regions or (b) a difference in the left and right bulk cosmological constants. While behaviour (a) can be avoided by a redefinition of the fluid variables, (b) establishes a critical value of the asymmetry over which the pressure singularity occurs. We introduce the pressure singularity censorship which bounds the degree of asymmetry in the bulk cosmological constant. We also show as a model-independent generic feature that the asymmetry source term due to the bulk cosmological constant increases in the early universe. In order to obey the nucleosynthesis constraints, the brane tension should be constrained therefore both from below and from above. With the maximal degree of asymmetry obeying the pressure singularity censorship, the higher limit is ten times the lower limit. The degree of asymmetry allowed by present cosmological observations is, however, much less, pushing the upper limit to infinity.

  3. The Swiss NEHAP: why it ended.

    Science.gov (United States)

    Forbat, Julien

    2015-09-01

    While European countries tend to increase the importance given to their national environmental health action plan (NEHAP), Switzerland stopped implementing its NEHAP in 2007. This study investigates the reasons for this surprising decision. The results provide an explanation of a relatively unique case and should inform any person interested in understanding common obstacles in the making and implementation of coordinated environmental health policies and programs. Data used in this study have been obtained from interviews conducted among experts of the Swiss environmental health policies and from survey results provided by the WHO Regional Office for Europe. Findings show that financial constraints were only partly responsible for the abandonment of the NEHAP and that many of the shortcomings observed arose from the creation and the functioning of the Environmental and Health Section at the Federal Office of Public Health, which was devoted to the NEHAP. Lack of scientific knowledge and capacity to build intersectoral collaboration, compounded by a limited conception of environmental health, resulted in a lack of political awareness of environmental health issues. In consequence, the study highlights the necessity of a true interdisciplinary and intersectoral approach for environmental health policies. Policy makers should also be concerned with the creation of relevant systems of indicators, since they appear to be fundamental to the success of environmental health policies. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. Internet Voting for Expatriates: The Swiss Case

    Directory of Open Access Journals (Sweden)

    Micha Germann

    2014-12-01

    Full Text Available In 2008 the first Swiss canton introduced internet voting for expatriates, thus initiating the second phase in Switzerland’s piecemeal i-voting roll-out. More cantons soon followed, and as of this writing expatriates from 12 out of the 26 cantons can vote online. This paper focuses on the second phase involving expatriates. We address three questions at the core of the internet voting research agenda. First, the popularity question: to what extent do expatriates make use of the new online channel? Second, the ‘who’ question: what is the profile of the typical expatriate i-voter? Finally, the turnout question: did the extension of internet voting to the expatriates have an effect on electoral mobilization? Our findings indicate that the online channel is very popular among expatriates, both if compared to other trials in Switzerland itself and internationally. On the other hand, known patterns regarding the profile of i-voters and the effect on mobilization seem to be also replicated in the expatriate trials. Expatriate i-voters tend to be young, male, and there is some evidence of an upper-class bias. Thus, usage of the online channel seems driven by the digital divide also among expatriates. Moreover, we find some evidence that i-voting did not affect electoral mobilization, similarly to trials involving residents.

  5. Holocene Glacier Fluctuations In The Swiss Alps

    Science.gov (United States)

    Holzhauser, H.

    The reconstruction of preindustrial glacier fluctuations in the Swiss Alps reveals the natural range of Holocene climate variability against which the present-day climatic situation can be judged. The results of very recent research on the Great Aletsch and Gorner Glaciers (Valaisian Alps), the Lower Grindelwald Glacier (Bernese Alps) shed light on the glacier fluctuations during the last 3200 years. These glaciers have, at max- imum extensions, penetrated below the timberline and have even reached inhabited areas resulting in sometimes massive destruction. Losses of buildings, woods and pas- tures are the conditions governing the methods used for the reconstruction of glacier length fluctuation through time. The main methods are: historical - the interpretation of pictorial and written historical records, glazio-archaeology - the search for anthro- pogenic traces that are directly related to changes in glacier size/length and scientific - the radiocarbon dating of fossil soils (palaeosols) and wood found in glacier fore- fields. Numerous samples of palaeosols and fossil wood (tree trunks, roots and macro- remains) found in the glacier forefield were radiocarbon dated. Owing to the good condition of several fossil tree trunks, dendrochronological analyses were also con- ducted. The dendrochronological analysis of fossil trees has supplied much reliable evidence of glacier fluctuations through its proven exactness (a single year resolution) which is impossible to obtain with the radiocarbon method alone.

  6. Machine Learning and Radiology

    Science.gov (United States)

    Wang, Shijun; Summers, Ronald M.

    2012-01-01

    In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. PMID:22465077

  7. The basic anaesthesia machine.

    Science.gov (United States)

    Gurudatt, Cl

    2013-09-01

    After WTG Morton's first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey's machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia.

  8. The basic anaesthesia machine

    Directory of Open Access Journals (Sweden)

    C L Gurudatt

    2013-01-01

    Full Text Available After WTG Morton′s first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey′s machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia.

  9. Swiss and German Ministers make a joint visit to CERN

    CERN Multimedia

    2008-01-01

    On Friday, 23 May the German Federal Minister of Education and Research, Annette Schavan, and the Head of the Swiss Federal Department of Foreign Affairs, Micheline Calmy-Rey, paid a joint visit to CERN. German Federal Minister of Education and Research, Annette Schavan and the Head of the Swiss Federal Department of Foreign Affairs, Micheline Calmy-Rey, with Robert Aymar, Rolf-Dieter Heuer and Jos Engelen. The Swiss and German ministers in front of the ATLAS experiment, accompanied by Robert Aymar, Rolf-Dieter Heuer, Jos Engelen and Peter Jenni. Director-General Robert Aymar gave the ministers a short introduction to CERN, which was followed by the signing of the Guest Book. Both ministers took the opportunity to go to Point 1 to visit the ATLAS experiment, guided by the ATLAS spokesperson Peter Jenni, and also the LHC tunnel.

  10. A scenario planning approach for disasters on Swiss road network

    Science.gov (United States)

    Mendes, G. A.; Axhausen, K. W.; Andrade, J. S.; Herrmann, H. J.

    2014-05-01

    We study a vehicular traffic scenario on Swiss roads in an emergency situation, calculating how sequentially roads block due to excessive traffic load until global collapse (gridlock) occurs and in this way displays the fragilities of the system. We used a database from Bundesamt für Raumentwicklung which contains length and maximum allowed speed of all roads in Switzerland. The present work could be interesting for government agencies in planning and managing for emergency logistics for a country or a big city. The model used to generate the flux on the Swiss road network was proposed by Mendes et al. [Physica A 391, 362 (2012)]. It is based on the conservation of the number of vehicles and allows for an easy and fast way to follow the formation of traffic jams in large systems. We also analyze the difference between a nonlinear and a linear model and the distribution of fluxes on the Swiss road.

  11. Part Machinability Evaluation System

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In the early design period, estimation of the part or the whole product machinability is useful to consider the function and process request of the product at the same time so as to globally optimize the design decision. This paper presents a part machinability evaluation system, discusses the general restrictions of part machinability, and realizes the inspection of these restrictions with the relation between tool scan space and part model. During the system development, the expansibility and understandability were considered, and an independent restriction algorithm library and a general function library were set up. Additionally, the system has an interpreter and a knowledge manager.

  12. Fundamentals of machine design

    CERN Document Server

    Karaszewski, Waldemar

    2011-01-01

    A forum of researchers, educators and engineers involved in various aspects of Machine Design provided the inspiration for this collection of peer-reviewed papers. The resultant dissemination of the latest research results, and the exchange of views concerning the future research directions to be taken in this field will make the work of immense value to all those having an interest in the topics covered. The book reflects the cooperative efforts made in seeking out the best strategies for effecting improvements in the quality and the reliability of machines and machine parts and for extending

  13. Machine Tool Software

    Science.gov (United States)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  14. Analysis of synchronous machines

    CERN Document Server

    Lipo, TA

    2012-01-01

    Analysis of Synchronous Machines, Second Edition is a thoroughly modern treatment of an old subject. Courses generally teach about synchronous machines by introducing the steady-state per phase equivalent circuit without a clear, thorough presentation of the source of this circuit representation, which is a crucial aspect. Taking a different approach, this book provides a deeper understanding of complex electromechanical drives. Focusing on the terminal rather than on the internal characteristics of machines, the book begins with the general concept of winding functions, describing the placeme

  15. Database machine performance

    Energy Technology Data Exchange (ETDEWEB)

    Cesarini, F.; Salza, S.

    1987-01-01

    This book is devoted to the important problem of database machine performance evaluation. The book presents several methodological proposals and case studies, that have been developed within an international project supported by the European Economic Community on Database Machine Evaluation Techniques and Tools in the Context of the Real Time Processing. The book gives an overall view of the modeling methodologies and the evaluation strategies that can be adopted to analyze the performance of the database machine. Moreover, it includes interesting case studies and an extensive bibliography.

  16. Virtual Machine Introspection

    Directory of Open Access Journals (Sweden)

    S C Rachana

    2014-06-01

    Full Text Available Cloud computing is an Internet-based computing solution which provides the resources in an effective manner. A very serious issue in cloud computing is security which is a major obstacle for the adoption of cloud. The most important threats of cloud computing are Multitenancy, Availability, Loss of control, Loss of Data, outside attacks, DOS attacks, malicious insiders, etc. Among many security issues in cloud, the Virtual Machine Security is one of the very serious issues. Thus, monitoring of virtual machine is essential. The paper proposes a Virtual Network Introspection [VMI] System to secure the Virtual machines from Distributed Denial of Service [DDOS] and Zombie attacks.

  17. Virtual Machine Introspection

    Directory of Open Access Journals (Sweden)

    S C Rachana

    2015-11-01

    Full Text Available Cloud computing is an Internet-based computing solution which provides the resources in an effective manner. A very serious issue in cloud computing is security which is a major obstacle for the adoption of cloud. The most important threats of cloud computing are Multitenancy, Availability, Loss of control, Loss of Data, outside attacks, DOS attacks, malicious insiders, etc. Among many security issues in cloud, the Virtual Machine Security is one of the very serious issues. Thus, monitoring of virtual machine is essential. The paper proposes a Virtual Network Introspection [VMI] System to secure the Virtual machines from Distributed Denial of Service [DDOS] and Zombie attacks.

  18. Machine Learning for Hackers

    CERN Document Server

    Conway, Drew

    2012-01-01

    If you're an experienced programmer interested in crunching data, this book will get you started with machine learning-a toolkit of algorithms that enables computers to train themselves to automate useful tasks. Authors Drew Conway and John Myles White help you understand machine learning and statistics tools through a series of hands-on case studies, instead of a traditional math-heavy presentation. Each chapter focuses on a specific problem in machine learning, such as classification, prediction, optimization, and recommendation. Using the R programming language, you'll learn how to analyz

  19. [Swiss research agenda for gerontological nursing].

    Science.gov (United States)

    Imhof, Lorenz; Naef, Rahel; Mahrer-Imhof, Romy

    2008-12-01

    In Switzerland life expectancy is currently 84 years in women and 79 years in men. By 2030 the number of people over 80 will increase by 83% to 625 000. The need of nursing care in this population is expected to double. In order to ensure high quality care, scientific knowledge generated by nursing research is, therefore, pivotal. Within the framework of a national project, a nursing research agenda has been formulated based on a literature review, expert panels, a national survey, and a consensus conference; seven priorities for clinical nursing research for the years 2007-2017 have been developed. In the field of gerontological nursing twenty-one research priorities have been identified. They include among others interventions to support independent living and autonomy at home or the impact of new technology on nursing care of the elderly. Support for caregivers and the health of caregivers of patients with dementia have to be addressed as well as interventions for specific challenges in the elderly such as fall prevention, delirium, malnutrition, and depression. Pivotal questions in nursing research are concerned with the continuity of nursing care that exceeds institutional and professional boundaries. Moreover, it is recommended that research projects address the impact of political decisions on nursing care and provide knowledge to improve quality in nursing homes and community health care. With this article the first research agenda for gerontological nursing is presented, that is based on the seven priorities of the Swiss Research Agenda for Nursing-SRAN and in turn can be used as a basis for strategic discussion, action plans, and research projects.

  20. Some relations between quantum Turing machines and Turing machines

    CERN Document Server

    Sicard, A; Sicard, Andrés; Vélez, Mario

    1999-01-01

    For quantum Turing machines we present three elements: Its components, its time evolution operator and its local transition function. The components are related with deterministic Turing machines, the time evolution operator is related with reversible Turing machines and the local transition function is related with probabilistic and reversible Turing machines.

  1. Machining of hard-to-machine materials

    OpenAIRE

    2016-01-01

    Bakalářská práce se zabývá studiem obrábění těžkoobrobitelných materiálů. V první části jsou rozděleny těžkoobrobitelné materiály a následuje jejich analýza. V další části se práce zaměřuje na problematiku obrobitelnosti jednotlivých slitin. Závěrečná část práce je věnovaná experimentu, jeho statistickému zpracování a nakonec následnému vyhodnocení. This bachelor thesis studies the machining of hard-to-machine materials. The first part of the thesis considers hard-to-machine materials and ...

  2. Machine (bulk) harvest

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a summary of machine harvesting activities on Neal Smith National Wildlife Refuge between 1991 and 2008. Information is provided for each year about...

  3. Machine Vision Handbook

    CERN Document Server

    2012-01-01

    The automation of visual inspection is becoming more and more important in modern industry as a consistent, reliable means of judging the quality of raw materials and manufactured goods . The Machine Vision Handbook  equips the reader with the practical details required to engineer integrated mechanical-optical-electronic-software systems. Machine vision is first set in the context of basic information on light, natural vision, colour sensing and optics. The physical apparatus required for mechanized image capture – lenses, cameras, scanners and light sources – are discussed followed by detailed treatment of various image-processing methods including an introduction to the QT image processing system. QT is unique to this book, and provides an example of a practical machine vision system along with extensive libraries of useful commands, functions and images which can be implemented by the reader. The main text of the book is completed by studies of a wide variety of applications of machine vision in insp...

  4. Tests of Machine Intelligence

    CERN Document Server

    Legg, Shane

    2007-01-01

    Although the definition and measurement of intelligence is clearly of fundamental importance to the field of artificial intelligence, no general survey of definitions and tests of machine intelligence exists. Indeed few researchers are even aware of alternatives to the Turing test and its many derivatives. In this paper we fill this gap by providing a short survey of the many tests of machine intelligence that have been proposed.

  5. Metalworking and machining fluids

    Science.gov (United States)

    Erdemir, Ali; Sykora, Frank; Dorbeck, Mark

    2010-10-12

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  6. mlpy: Machine Learning Python

    CERN Document Server

    Albanese, Davide; Merler, Stefano; Riccadonna, Samantha; Jurman, Giuseppe; Furlanello, Cesare

    2012-01-01

    mlpy is a Python Open Source Machine Learning library built on top of NumPy/SciPy and the GNU Scientific Libraries. mlpy provides a wide range of state-of-the-art machine learning methods for supervised and unsupervised problems and it is aimed at finding a reasonable compromise among modularity, maintainability, reproducibility, usability and efficiency. mlpy is multiplatform, it works with Python 2 and 3 and it is distributed under GPL3 at the website http://mlpy.fbk.eu.

  7. Human-machine interactions

    Science.gov (United States)

    Forsythe, J. Chris; Xavier, Patrick G.; Abbott, Robert G.; Brannon, Nathan G.; Bernard, Michael L.; Speed, Ann E.

    2009-04-28

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  8. Machine Learning with Distances

    Science.gov (United States)

    2015-02-16

    and demonstrated their usefulness in experiments. 1 Introduction The goal of machine learning is to find useful knowledge behind data. Many machine...212, 172]. However, direct divergence approximators still suffer from the curse of dimensionality. A possible cure for this problem is to combine them...obtain the global optimal solution or even a good local solution without any prior knowledge . For this reason, we decided to introduce the unit-norm

  9. mlpy: Machine Learning Python

    OpenAIRE

    Albanese, Davide; Visintainer, Roberto; Merler, Stefano; Riccadonna, Samantha; Jurman, Giuseppe; Furlanello, Cesare

    2012-01-01

    mlpy is a Python Open Source Machine Learning library built on top of NumPy/SciPy and the GNU Scientific Libraries. mlpy provides a wide range of state-of-the-art machine learning methods for supervised and unsupervised problems and it is aimed at finding a reasonable compromise among modularity, maintainability, reproducibility, usability and efficiency. mlpy is multiplatform, it works with Python 2 and 3 and it is distributed under GPL3 at the website http://mlpy.fbk.eu.

  10. Cigarette smoke impairs granulosa cell proliferation and oocyte growth after exposure cessation in young Swiss mice: an experimental study

    Directory of Open Access Journals (Sweden)

    Paixão Larissa LO

    2012-09-01

    Full Text Available Abstract Background Cigarette smoke is associated with decreased female fertility, causing damage to ovarian function and disturbing follicle development. However, the effects of cigarette toxicants on ovarian function depend on duration and intensity of exposure. The aim of this study was to assess the effects of brief, intense exposure to tobacco smoke on granulosa cell number, oocyte growth, and follicle size during puberty in female Swiss mice. Methods Ten female Swiss mice aged 35 days were exposed to tobacco smoke from 3R4F reference research cigarettes. They were exposed to an automatic smoking machine 8 h/day, 7 days/week for 15 days. Ten age-matched controls were kept in a different room and exposed to ambient air. At the end of 15 days, five mice in each group were euthanized and the ovaries were analyzed for follicular morphometry and granulosa cell count. The remaining animals were kept for an additional 30 days for further analysis as an ex-smoker group and control group. Comparison between the two groups was evaluated by the Student’s t-test or a two-way ANOVA followed by Bonferroni post-test was applied for multiple comparisons. Results We found that cigarette smoke impaired antral follicular growth even after exposure cessation (p Conclusions The negative effects of cigarette smoking seem to last even after exposure has been interrupted. Moreover, brief exposure during puberty may induce silent oocyte disruption, which could in turn lead to decreased fecundity rates.

  11. EVALUATION OF MACHINE TOOL QUALITY

    Directory of Open Access Journals (Sweden)

    Ivan Kuric

    2011-12-01

    Full Text Available Paper deals with aspects of quality and accuracy of machine tools. As the accuracy of machine tools has key factor for product quality, it is important to know the methods for evaluation of quality and accuracy of machine tools. Several aspects of diagnostics of machine tools are described, such as aspects of reliability.

  12. An HTS machine laboratory prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2012-01-01

    This paper describes Superwind HTS machine laboratory setup which is a small scale HTS machine designed and build as a part of the efforts to identify and tackle some of the challenges the HTS machine design may face. One of the challenges of HTS machines is a Torque Transfer Element (TTE) which...

  13. Machining of fiber reinforced composites

    Science.gov (United States)

    Komanduri, Ranga; Zhang, Bi; Vissa, Chandra M.

    Factors involved in machining of fiber-reinforced composites are reviewed. Consideration is given to properties of composites reinforced with boron filaments, glass fibers, aramid fibers, carbon fibers, and silicon carbide fibers and to polymer (organic) matrix composites, metal matrix composites, and ceramic matrix composites, as well as to the processes used in conventional machining of boron-titanium composites and of composites reinforced by each of these fibers. Particular attention is given to the methods of nonconventional machining, such as laser machining, water jet cutting, electrical discharge machining, and ultrasonic assisted machining. Also discussed are safety precautions which must be taken during machining of fiber-containing composites.

  14. Machining of Metal Matrix Composites

    CERN Document Server

    2012-01-01

    Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manu...

  15. MESSAGE TO MEMBERS OF THE PERSONNEL OF SWISS NATIONALITY

    CERN Multimedia

    Legal Service

    2002-01-01

    15 November 2002 Reimbursement of Swiss income tax The Swiss authorities have introduced a new system of taxation with effect from this year onwards. The main feature of this new system is that the tax year henceforth coincides with the year in which income is earned. One major practical consequence is that Swiss members of the personnel will receive a provisional income tax demand that must be settled by the date shown; however, the final income tax demand will not be sent until up to several months later. Hitherto, the CERN Administration only recognised this final demand as proof of payment for the reimbursement of Swiss income tax. In view of the delay the new procedure will generate between the settlement of the provisional demand and receipt of the final demand, and to avoid members of the personnel having to bear the cost of an advance payment, the CERN Administration has decided to align its reimbursement procedure with the new system of taxation. In future, the provisional income tax demand will also...

  16. Swiss cheese model with the superstring dark energy

    Science.gov (United States)

    Stuchlík, Zdeněk; Kološ, Martin

    2005-12-01

    The Swiss cheese model of the Universe with the superstring dark energy is constructed. The junction conditions are shown to be fulfilled and time evolution of the matching hypersurface of the internal Schwarzschild spacetime and homogeneous external Friedman Universe is studied.

  17. History of heat pumps - Swiss contributions and international milestones

    Energy Technology Data Exchange (ETDEWEB)

    Zogg, M.

    2008-05-15

    Compared to conventional boilers, heating by heat pumps cuts down fuel consumption and CO{sub 2} emissions to about 50%. Compared to electric resistance heating, the energy consumption is even reduced up to 80%. Therefore, the impressive market penetration growth of heat pumps will continue. Swiss pioneers were the first to realize functioning vapour recompression plants. The first European heat pumps were realized in Switzerland. To date it remains one of the heat pump champions. Swiss pioneering work in the development of borehole heat exchangers, sewage heat recovery, oil free piston compressors and turbo compressors is well known. The biggest heat pump ever built comes from Switzerland. Although there is a fairly comprehensive natural gas distribution grid, 75% of the new single-family homes built in Switzerland are currently heated by heat pumps. This paper presents some of the highlights of this success story focusing on Swiss developments and relating them to the international milestones. In order to indicate the direction in which the future development might go to, some recent Swiss research projects are presented as well. (author)

  18. Interdisciplinarity in Swiss Schools: A Difficult Step into the Future

    Science.gov (United States)

    Ghisla, Gianni; Bausch, Luca; Bonoli, Lorenzo

    2016-01-01

    Multi- and interdisciplinary education is a major postulate in the Swiss school system and has considerable weight in educational programs and learning objectives, both in compulsory school and at the upper secondary school level. However, materializing this postulate still poses problems at the political and institutional level, where the…

  19. Swiss Elementary School Teachers' Attitudes toward Forest Education

    Science.gov (United States)

    Lindemann-Matthies, Petra; Knecht, Sarah

    2011-01-01

    This article investigates benefits and challenges of forest education in view of 257 Swiss elementary school teachers (1st-3rd grade), by means of a written questionnaire and 15 in-depth interviews. Two thirds of the teachers carried out forest education during normal lesson hours (mean visits = eight per year). Forests were clearly considered as…

  20. Wind energy and Swiss hydro power; Windenergie und schweizerischer Wasserkraftpark

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Baur, M. [Econcept AG, Zuerich (Switzerland); Fritz, W.; Zimmer, Ch.; Feldmann, J. [Consentec, Consulting fuer Energiewirtschaft und -technik GmbH, Aachen (Germany); Haubrich, H.-J.; Dany, G.; Schmoeller, H.; Hartmann, T. [Institut fuer Elektrische Anlagen und Energiewirtschaft (IAEW), RWTH, Aachen (Germany)

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) examines the possibilities of using Switzerland's hydropower generation facilities as a means of control and as a capacity-reserve for a European power system that includes a considerable amount of wind-generated electricity. The aims of the study - the analysis of possible changes in power availability and of the relative importance of peak load compensation, economic optimisation potential for the use of Swiss hydropower and organisational aspects - are presented. Various methods for organising production timetables and trading are looked at, as are future developments in the European power market. Methods of assessment of the value of Swiss hydropower installations are discussed in detail and possibilities of increasing capacity are discussed. The report is concluded with recommendations on the participation of Swiss hydropower in the market for regulation energy and the development of associated strategies. Also, environmental aspects are examined and the influence of national wind-energy concepts are discussed.

  1. Sino-Swiss center for cassava technology launched in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Under the joint sponsorship of the Shanghai Institutes for Biological Sciences (SIBS) and Swiss Federal Institute of Technology (ETH Zurich), the Shanghai Center for Cassava Biotechnology (SCCB) has been established at the Shanghai Institute of Plant Physiology and Ecology(SIPE), SIBS.

  2. Non-conventional electrical machines

    CERN Document Server

    Rezzoug, Abderrezak

    2013-01-01

    The developments of electrical machines are due to the convergence of material progress, improved calculation tools, and new feeding sources. Among the many recent machines, the authors have chosen, in this first book, to relate the progress in slow speed machines, high speed machines, and superconducting machines. The first part of the book is dedicated to materials and an overview of magnetism, mechanic, and heat transfer.

  3. Automatically extracting functionally equivalent proteins from SwissProt

    Directory of Open Access Journals (Sweden)

    Martin Andrew CR

    2008-10-01

    Full Text Available Abstract Background There is a frequent need to obtain sets of functionally equivalent homologous proteins (FEPs from different species. While it is usually the case that orthology implies functional equivalence, this is not always true; therefore datasets of orthologous proteins are not appropriate. The information relevant to extracting FEPs is contained in databanks such as UniProtKB/Swiss-Prot and a manual analysis of these data allow FEPs to be extracted on a one-off basis. However there has been no resource allowing the easy, automatic extraction of groups of FEPs – for example, all instances of protein C. We have developed FOSTA, an automatically generated database of FEPs annotated as having the same function in UniProtKB/Swiss-Prot which can be used for large-scale analysis. The method builds a candidate list of homologues and filters out functionally diverged proteins on the basis of functional annotations using a simple text mining approach. Results Large scale evaluation of our FEP extraction method is difficult as there is no gold-standard dataset against which the method can be benchmarked. However, a manual analysis of five protein families confirmed a high level of performance. A more extensive comparison with two manually verified functional equivalence datasets also demonstrated very good performance. Conclusion In summary, FOSTA provides an automated analysis of annotations in UniProtKB/Swiss-Prot to enable groups of proteins already annotated as functionally equivalent, to be extracted. Our results demonstrate that the vast majority of UniProtKB/Swiss-Prot functional annotations are of high quality, and that FOSTA can interpret annotations successfully. Where FOSTA is not successful, we are able to highlight inconsistencies in UniProtKB/Swiss-Prot annotation. Most of these would have presented equal difficulties for manual interpretation of annotations. We discuss limitations and possible future extensions to FOSTA, and

  4. Machinability evaluation of machinable ceramics with fuzzy theory

    Institute of Scientific and Technical Information of China (English)

    YU Ai-bing; ZHONG Li-jun; TAN Ye-fa

    2005-01-01

    The property parameters and machining output parameters were selected for machinability evaluation of machinable ceramics. Based on fuzzy evaluation theory, two-stage fuzzy evaluation approach was applied to consider these parameters. Two-stage fuzzy comprehensive evaluation model was proposed to evaluate machinability of machinable ceramic materials. Ce-ZrO2/CePO4 composites were fabricated and machined for evaluation of machinable ceramics. Material removal rates and specific normal grinding forces were measured. The parameters concerned with machinability were selected as alternative set. Five grades were chosen for the machinability evaluation of machnable ceramics. Machinability grades of machinable ceramics were determined through fuzzy operation. Ductile marks are observed on Ce-ZrO2/CePO4 machined surface. Five prepared Ce-ZrO2/CePO4 composites are classified as three machinability grades according to the fuzzy comprehensive evaluation results. The machinability grades of Ce-ZrO2/CePO4 composites are concerned with CePO4 content.

  5. Summary of operating experience in Swiss nuclear power plants 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    In 1994 the Swiss nuclear power plants produced their highest-ever combined annual output. Their contribution to total electricity generation in the country was 36%. At Muehleberg the power uprate, undertaken in 1993, was effective for the first time for an entire year. The larger capacity of the new steam generators installed in 1993 in unit 1 of the Beznau NPP allows for an electric output of 103% of nominal power. The plant efficiency of the Goesgen and Leibstadt units was increased by replacing the low pressure turbines by the new ones with a modern design. The application for a power uprate of the Leibstadt reactor is still pending. For the first time in Switzerland, one of the reactor units, Beznau 2, operated on an extended cycle of one and a half years, with no refuelling outage in 1994. In spite of the replacements of two of its three low pressure turbines, Goesgen had the shortest refuelling shutdown since the start of commercial operation. The average number of reactor scrams at the Swiss plants remained stable, at less than one scram per reactor year. Re-inspection of crack indications detected in 1990 in the core shroud of the Muehleberg reactor revealed no significant changes. A crack indication was found in one of the other welds inspected. The Swiss government issued a limited operating licence for Beznau 2 for the next ten years, i.e. until the end of 2004. The only other unit with a limited operating licence (until 2003) is Muehleberg. The remaining three reactor units, have no time limits on their operating licences, in accordance with the Atomic Law. Goesgen is the first Swiss nuclear power plant having now produced more than 100 billion kWh. As from January 1, 1995, the nominal net power of the largest Swiss reactor unit, Leibstadt, has been fixed at 1030 MW; that of the Goesgen NPP has been increased by 25 MW to 965 MW. (author) figs., tabs.

  6. MACHINE MOTION EQUATIONS

    Directory of Open Access Journals (Sweden)

    Florian Ion Tiberiu Petrescu

    2015-09-01

    Full Text Available This paper presents the dynamic, original, machine motion equations. The equation of motion of the machine that generates angular speed of the shaft (which varies with position and rotation speed is deduced by conservation kinetic energy of the machine. An additional variation of angular speed is added by multiplying by the coefficient dynamic D (generated by the forces out of mechanism and or by the forces generated by the elasticity of the system. Kinetic energy conservation shows angular speed variation (from the shaft with inertial masses, while the dynamic coefficient introduces the variation of w with forces acting in the mechanism. Deriving the first equation of motion of the machine one can obtain the second equation of motion dynamic. From the second equation of motion of the machine it determines the angular acceleration of the shaft. It shows the distribution of the forces on the mechanism to the internal combustion heat engines. Dynamic, the velocities can be distributed in the same way as forces. Practically, in the dynamic regimes, the velocities have the same timing as the forces. Calculations should be made for an engine with a single cylinder. Originally exemplification is done for a classic distribution mechanism, and then even the module B distribution mechanism of an Otto engine type.

  7. Dynamics of cyclic machines

    CERN Document Server

    Vulfson, Iosif

    2015-01-01

    This book focuses on modern methods of oscillation analysis in machines, including cyclic action mechanisms (linkages, cams, steppers, etc.). It presents schematization techniques and mathematical descriptions of oscillating systems, taking into account the variability of the parameters and nonlinearities, engineering evaluations of dynamic errors, and oscillation suppression methods. The majority of the book is devoted to the development of new methods of dynamic analysis and synthesis for cyclic machines that form regular oscillatory systems with multiple duplicate modules.  There are also sections examining aspects of general engineering interest (nonlinear dissipative forces, systems with non-stationary constraints, impacts and pseudo-impacts in clearances, etc.)  The examples in the book are based on the widely used results of theoretical and experimental studies as well as engineering calculations carried out in relation to machines used in the textile, light, polygraphic and other industries. Particu...

  8. Chatter and machine tools

    CERN Document Server

    Stone, Brian

    2014-01-01

    Focussing on occurrences of unstable vibrations, or Chatter, in machine tools, this book gives important insights into how to eliminate chatter with associated improvements in product quality, surface finish and tool wear. Covering a wide range of machining processes, including turning, drilling, milling and grinding, the author uses his research expertise and practical knowledge of vibration problems to provide solutions supported by experimental evidence of their effectiveness. In addition, this book contains links to supplementary animation programs that help readers to visualise the ideas detailed in the text. Advancing knowledge in chatter avoidance and suggesting areas for new innovations, Chatter and Machine Tools serves as a handbook for those desiring to achieve significant reductions in noise, longer tool and grinding wheel life and improved product finish.

  9. Machines and Metaphors

    Directory of Open Access Journals (Sweden)

    Ángel Martínez García-Posada

    2016-10-01

    Full Text Available The edition La ley del reloj. Arquitectura, máquinas y cultura moderna (Cátedra, Madrid, 2016 registers the useful paradox of the analogy between architecture and technique. Its author, the architect Eduardo Prieto, also a philosopher, professor and writer, acknowledges the obvious distance from machines to buildings, so great that it can only be solved using strange comparisons, since architecture does not move nor are the machines habitable, however throughout the book, from the origin of the metaphor of the machine, with clarity in his essay and enlightening erudition, he points out with certainty some concomitances of high interest, drawing throughout history a beautiful cartography of the fruitful encounter between organics and mechanics.

  10. Machine Learning Markets

    CERN Document Server

    Storkey, Amos

    2011-01-01

    Prediction markets show considerable promise for developing flexible mechanisms for machine learning. Here, machine learning markets for multivariate systems are defined, and a utility-based framework is established for their analysis. This differs from the usual approach of defining static betting functions. It is shown that such markets can implement model combination methods used in machine learning, such as product of expert and mixture of expert approaches as equilibrium pricing models, by varying agent utility functions. They can also implement models composed of local potentials, and message passing methods. Prediction markets also allow for more flexible combinations, by combining multiple different utility functions. Conversely, the market mechanisms implement inference in the relevant probabilistic models. This means that market mechanism can be utilized for implementing parallelized model building and inference for probabilistic modelling.

  11. Machine Learning for Security

    CERN Document Server

    CERN. Geneva

    2015-01-01

    Applied statistics, aka ‘Machine Learning’, offers a wealth of techniques for answering security questions. It’s a much hyped topic in the big data world, with many companies now providing machine learning as a service. This talk will demystify these techniques, explain the math, and demonstrate their application to security problems. The presentation will include how-to’s on classifying malware, looking into encrypted tunnels, and finding botnets in DNS data. About the speaker Josiah is a security researcher with HP TippingPoint DVLabs Research Group. He has over 15 years of professional software development experience. Josiah used to do AI, with work focused on graph theory, search, and deductive inference on large knowledge bases. As rules only get you so far, he moved from AI to using machine learning techniques identifying failure modes in email traffic. There followed digressions into clustered data storage and later integrated control systems. Current ...

  12. Advanced Analysis of Nontraditional Machining

    CERN Document Server

    Tsai, Hung-Yin

    2013-01-01

    Nontraditional machining utilizes thermal, chemical, electrical, mechanical and optical sources of energy to form and cut materials. Advanced Analysis of Nontraditional Machining explains in-depth how each of these advanced machining processes work, their machining system components, and process variables and industrial applications, thereby offering advanced knowledge and scientific insight. This book also documents the latest and frequently cited research results of a few key nonconventional machining processes for the most concerned topics in industrial applications, such as laser machining, electrical discharge machining, electropolishing of die and mold, and wafer processing for integrated circuit manufacturing. This book also: Fills the gap of the advanced knowledge of nonconventional machining between industry and research Documents latest and frequently cited research of key nonconventional machining processes for the most sought after topics in industrial applications Demonstrates advanced multidisci...

  13. Machining strategy choice: performance VIEWER

    CERN Document Server

    Tapie, Laurent; Anselmetti, Bernard

    2009-01-01

    Nowadays high speed machining (HSM) machine tool combines productivity and part quality. So mould and die maker invested in HSM. Die and mould features are more and more complex shaped. Thus, it is difficult to choose the best machining strategy according to part shape. Geometrical analysis of machining features is not sufficient to make an optimal choice. Some research show that security, technical, functional and economical constrains must be taken into account to elaborate a machining strategy. During complex shape machining, production system limits induce feed rate decreases, thus loss of productivity, in some part areas. In this paper we propose to analyse these areas by estimating tool path quality. First we perform experiments on HSM machine tool to determine trajectory impact on machine tool behaviour. Then, we extract critical criteria and establish models of performance loss. Our work is focused on machine tool kinematical performance and numerical controller unit calculation capacity. We implement...

  14. Electrical machines diagnosis

    CERN Document Server

    Trigeassou, Jean-Claude

    2013-01-01

    Monitoring and diagnosis of electrical machine faults is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives.This book provides a survey of the techniques used to detect the faults occurring in electrical drives: electrical, thermal and mechanical faults of the electrical machine, faults of the static converter and faults of the energy storage unit.Diagnosis of faults occurring in electrical drives is an essential part of a global monitoring system used to improve reliability and serviceability. This diagnosis is perf

  15. Refrigerating machine oil

    Energy Technology Data Exchange (ETDEWEB)

    Nozawa, K.

    1981-03-17

    Refrigerating machine oil to be filled in a sealed motorcompressor unit constituting a refrigerating cycle system including an electric refrigerator, an electric cold-storage box, a small-scaled electric refrigerating show-case, a small-scaled electric cold-storage show-case and the like, is arranged to have a specifically enhanced property, in which smaller initial driving power consumption of the sealed motor-compressor and easier supply of the predetermined amount of the refrigerating machine oil to the refrigerating system are both guaranteed even in a rather low environmental temperature condition.

  16. Machine shop basics

    CERN Document Server

    Miller, Rex

    2004-01-01

    Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

  17. Electrical machines & their applications

    CERN Document Server

    Hindmarsh, J

    1984-01-01

    A self-contained, comprehensive and unified treatment of electrical machines, including consideration of their control characteristics in both conventional and semiconductor switched circuits. This new edition has been expanded and updated to include material which reflects current thinking and practice. All references have been updated to conform to the latest national (BS) and international (IEC) recommendations and a new appendix has been added which deals more fully with the theory of permanent-magnets, recognising the growing importance of permanent-magnet machines. The text is so arra

  18. Clojure for machine learning

    CERN Document Server

    Wali, Akhil

    2014-01-01

    A book that brings out the strengths of Clojure programming that have to facilitate machine learning. Each topic is described in substantial detail, and examples and libraries in Clojure are also demonstrated.This book is intended for Clojure developers who want to explore the area of machine learning. Basic understanding of the Clojure programming language is required, but thorough acquaintance with the standard Clojure library or any libraries are not required. Familiarity with theoretical concepts and notation of mathematics and statistics would be an added advantage.

  19. Perpetual Motion Machine

    OpenAIRE

    D. Tsaousis

    2008-01-01

    Ever since the first century A.D. there have been relative descriptions of known devices as well as manufactures for the creation of perpetual motion machines. Although physics has led, with two thermodynamic laws, to the opinion that a perpetual motion machine is impossible to be manufactured, inventors of every age and educational level appear to claim that they have invented something «entirely new» or they have improved somebody else’s invention, which «will function henceforth perpetuall...

  20. Man - Machine Communication

    CERN Document Server

    Petersen, Peter; Nielsen, Henning

    1984-01-01

    This report describes a Man-to-Machine Communication module which together with a STAC can take care of all operator inputs from the touch-screen, tracker balls and mechanical buttons. The MMC module can also contain a G64 card which could be a GPIB driver but many other G64 cards could be used. The soft-ware services the input devices and makes the results accessible from the CAMAC bus. NODAL functions for the Man Machine Communication is implemented in the STAC and in the ICC.

  1. Machine Fault Signature Analysis

    Directory of Open Access Journals (Sweden)

    Pratesh Jayaswal

    2008-01-01

    Full Text Available The objective of this paper is to present recent developments in the field of machine fault signature analysis with particular regard to vibration analysis. The different types of faults that can be identified from the vibration signature analysis are, for example, gear fault, rolling contact bearing fault, journal bearing fault, flexible coupling faults, and electrical machine fault. It is not the intention of the authors to attempt to provide a detailed coverage of all the faults while detailed consideration is given to the subject of the rolling element bearing fault signature analysis.

  2. Design of rotating electrical machines

    CERN Document Server

    Pyrhonen , Juha; Hrabovcova , Valeria

    2013-01-01

    In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machinesAn expanded section on the design of permanent magnet synchronous machines, now repo

  3. Swiss Science Festival - Science et Cité Science - It's magic!

    CERN Multimedia

    2001-01-01

    CERN's new antimatter factory, the Antiproton Decelerator (AD), will allow precision studies of antihydrogen. From Saturday 5 May for a week in ten Swiss towns, the 'Science et Cité' Festival will be bringing science to the public. The festival aims to be a bridge between the concerns of the public at large and those of scientists, so naturally CERN is involved. The Laboratory is organising special visits on the theme of antimatter. Following a presentation by Rolf Landua, spokesman of the ATHENA collaboration, visitors will discover two machines indispensable for the study of antimatter - LEIR, which as LEAR was where the first atoms of antihydrogen were created, and the new antimatter factory, the Antiproton Decelerator, AD. As well as these visits, CERN guides will become show people on the stand 'Magicians? Physicists!' at the old SIP building, where the majority of the Geneva events will take place. Disguised as magicians, our guides will amaze and astound their audience with a series of rema...

  4. Machine speech and speaking about machines

    Energy Technology Data Exchange (ETDEWEB)

    Nye, A. [Univ. of Wisconsin, Whitewater, WI (United States)

    1996-12-31

    Current philosophy of language prides itself on scientific status. It boasts of being no longer contaminated with queer mental entities or idealist essences. It theorizes language as programmable variants of formal semantic systems, reimaginable either as the properly epiphenomenal machine functions of computer science or the properly material neural networks of physiology. Whether or not such models properly capture the physical workings of a living human brain is a question that scientists will have to answer. I, as a philosopher, come at the problem from another direction. Does contemporary philosophical semantics, in its dominant truth-theoretic and related versions, capture actual living human thought as it is experienced, or does it instead reflect, regardless of (perhaps dubious) scientific credentials, pathology of thought, a pathology with a disturbing social history.

  5. Hybrid machining processes perspectives on machining and finishing

    CERN Document Server

    Gupta, Kapil; Laubscher, R F

    2016-01-01

    This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method of material removal, machining system, process variables and applications. This book provides a deep understanding of the need, application and mechanism of hybrid machining processes.

  6. Proposal for the award of a contract, without competitive tendering, for the supply of five numerically-controlled machining centres to BINP using money from the Russian fund

    CERN Document Server

    2001-01-01

    For the reasons set out in this document, the Finance Committee is invited to approve the negotiation of a contract, without competitive tendering, using money from the Budker Institute of Nuclear Physics (BINP) in the Russian Fund RF-LHC I, for the purchase of five numerically-controlled machining centres and the corresponding tooling from the firm MIKRON (CH) for an amount not exceeding 2 000 000 Swiss francs (DDU Novosibirsk).

  7. Cybernetic anthropomorphic machine systems

    Science.gov (United States)

    Gray, W. E.

    1974-01-01

    Functional descriptions are provided for a number of cybernetic man machine systems that augment the capacity of normal human beings in the areas of strength, reach or physical size, and environmental interaction, and that are also applicable to aiding the neurologically handicapped. Teleoperators, computer control, exoskeletal devices, quadruped vehicles, space maintenance systems, and communications equipment are considered.

  8. ARM : abstract rewriting machine

    NARCIS (Netherlands)

    J.F.T. Kamperman; H.R. Walters (Pum)

    1993-01-01

    textabstractTerm rewriting is frequently used as implementation technique for algebraic specifications. In this paper we present the abstract term rewriting machine (ARM), which has an extremely compact instruction set and imposes no restrictions on the implemented TRSs. Apart from standard

  9. A "Living" Machine

    Institute of Scientific and Technical Information of China (English)

    N.R.Bogatyrev

    2004-01-01

    Biomimetics (or bionics) is the engineering discipline that constructs artificial systems using biological principles. The ideal final result in biomimetics is to create a living machine. But what are the desirable and non-desirable properties of biomimetic product? Where can natural prototypes be found? How can technical solutions be transferred from nature to technology? Can we use living nature like LEGO bricks for construction our machines? How can biology help us? What is a living machine? In biomimetic practice only some "part" (organ, part of organ, tissue) of the observed whole organism is utilized. A possible template for future super-organism extension for biomimetic methods might be drawn from experiments in holistic ecological agriculture (ecological design, permaculture, ecological engineering, etc. ). The necessary translation of these rules to practical action can be achieved with the Russian Theory of Inventive Problem Solving (TRIZ), specifically adjusted to biology. Thus, permaculture, reinforced by a TRIZ conceptual framework, might provide the basis for Super-Organismic Bionics, which is hypothesized as necessary for effective ecological engineering. This hypothesis is supported by a case study-the design of a sustainable artificial nature reserve for wild pollinators as a living machine.

  10. Of machines and men ...

    CERN Multimedia

    CERN; Daniel Boileau

    1990-01-01

    Engineering and construction at LEP. Committed work and physicists motivation to work on this type of machine. With Guido Altarelli Theory Division Physicist, Ugo Amaldi Delphi Experiment Spokesman, Oscar Barbalat Head of Industry and Technology Liaison Office, Jonathan Ellis Head of Theory Division.

  11. Technology Time Machine 2012

    DEFF Research Database (Denmark)

    Lehner, Wolfgang; Fettweis, Gerhard; Fitzek, Frank

    2013-01-01

    The IEEE Technology Time Machine (TTM) is a unique event for industry leaders, academics, and decision making government officials who direct R&D activities, plan research programs or manage portfolios of research activities. This report covers the main topics of the 2nd Symposium of future...

  12. Training Restricted Boltzmann Machines

    DEFF Research Database (Denmark)

    Fischer, Asja

    Restricted Boltzmann machines (RBMs) are probabilistic graphical models that can also be interpreted as stochastic neural networks. Training RBMs is known to be challenging. Computing the likelihood of the model parameters or its gradient is in general computationally intensive. Thus, training...

  13. Laser machining of explosives

    Science.gov (United States)

    Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  14. Electrical Discharge Machining.

    Science.gov (United States)

    Montgomery, C. M.

    The manual is for use by students learning electrical discharge machining (EDM). It consists of eight units divided into several lessons, each designed to meet one of the stated objectives for the unit. The units deal with: introduction to and advantages of EDM, the EDM process, basic components of EDM, reaction between forming tool and workpiece,…

  15. The Answer Machine.

    Science.gov (United States)

    Feldman, Susan

    2000-01-01

    Discusses information retrieval systems and the need to have them adapt to user needs, integrate information in any format, reveal patterns and trends in information, and answer questions. Topics include statistics and probability; natural language processing; intelligent agents; concept mapping; machine-aided indexing; text mining; filtering;…

  16. Massively collaborative machine learning

    NARCIS (Netherlands)

    Rijn, van J.N.

    2016-01-01

    Many scientists are focussed on building models. We nearly process all information we perceive to a model. There are many techniques that enable computers to build models as well. The field of research that develops such techniques is called Machine Learning. Many research is devoted to develop comp

  17. Recent Advances on Permanent Magnet Machines

    Institute of Scientific and Technical Information of China (English)

    诸自强

    2012-01-01

    This paper overviews advances on permanent magnet(PM) brushless machines over last 30 years,with particular reference to new and novel machine topologies.These include current states and trends for surface-mounted and interior PM machines,electrically and mechanically adjusted variable flux PM machines including memory machine,hybrid PM machines which uniquely integrate PM technology into induction machines,switched and synchronous reluctance machines and wound field machines,Halbach PM machines,dual-rotor PM machines,and magnetically geared PM machines,etc.The paper highlights their features and applications to various market sectors.

  18. Estimating the Multilevel Rasch Model: With the lme4 Package

    Directory of Open Access Journals (Sweden)

    Harold Doran

    2007-02-01

    Full Text Available Traditional Rasch estimation of the item and student parameters via marginal maximum likelihood, joint maximum likelihood or conditional maximum likelihood, assume individuals in clustered settings are uncorrelated and items within a test that share a grouping structure are also uncorrelated. These assumptions are often violated, particularly in educational testing situations, in which students are grouped into classrooms and many test items share a common grouping structure, such as a content strand or a reading passage. Consequently, one possible approach is to explicitly recognize the clustered nature of the data and directly incorporate random effects to account for the various dependencies. This article demonstrates how the multilevel Rasch model can be estimated using the functions in R for mixed-effects models with crossed or partially crossed random effects. We demonstrate how to model the following hierarchical data structures: a individuals clustered in similar settings (e.g., classrooms, schools, b items nested within a particular group (such as a content strand or a reading passage, and c how to estimate a teacher × content strand interaction.

  19. Motherhood and the Machine

    Directory of Open Access Journals (Sweden)

    Miglena Nikolchina

    2014-12-01

    Full Text Available In her conceptualization of the human as defined by the capacity for revolt Kristeva unavoidably touches upon issues of robotization, technology, and the virtual. The concepts of animal and machine, however, although they do appear occasionally and in important ways, are never at the focus of her inquiries and are absent in her “New Forms of Revolt.” Yet these two concepts to a large extent define the field of contemporary philosophical debates of the human giving rise to three major theoretical orientations. On the one hand, there is the trend which tries to come to terms with technological novelties and the merging of human and machine that they imply. This trend unfolds under the rubric of “transhuman” or “posthuman” and of the “enhancement” of man. The second trend predominates in animal studies. Mostly in an ethical perspective but also ontologically, this trend, to which Derrida’s later writing made a significant contribution, questions the idea of the “human exception” and the rigorous distinction between man and animal on which this exception rests. While apparently antagonistic, both trends align the human with the animal and oppose it to technology. The third trend collapses the distinctions on which the previous two rely through the lens of biopolitics: drawing on Heidegger, Kojève, and Foucault, it regards contemporary technological transformations as amounting to the animalization of man.  The human disappears in the animal, in the machine, or in the indistinguishability of the two, confirming what Agamben has described as the inoperativeness of the anthropological machine. The present text turns to Kristeva’s conceptions of motherhood and revolt as introducing a powerful inflection in this tripartite field. Remarkably, it is precisely new sagas of rebellious machines like Battlestar “Galactica” that foreground the relevance of Kristeva’s approach.

  20. Machine learning in image steganalysis

    CERN Document Server

    Schaathun, Hans Georg

    2012-01-01

    "The only book to look at steganalysis from the perspective of machine learning theory, and to apply the common technique of machine learning to the particular field of steganalysis; ideal for people working in both disciplines"--

  1. New Applications of Learning Machines

    DEFF Research Database (Denmark)

    Larsen, Jan

    * Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection......* Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection...

  2. New Applications of Learning Machines

    DEFF Research Database (Denmark)

    Larsen, Jan

    * Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection......* Machine learning framework for sound search * Genre classification * Music separation * MIMO channel estimation and symbol detection...

  3. Hinged Shields for Machine Tools

    Science.gov (United States)

    Lallande, J. B.; Poland, W. W.; Tull, S.

    1985-01-01

    Flaps guard against flying chips, but fold away for tool setup. Clear plastic shield in position to intercept flying chips from machine tool and retracted to give operator access to workpiece. Machine shops readily make such shields for own use.

  4. Romanian - Swiss cooperative research programme "Environmental Science and Technology in Romania" (ESTROM)

    OpenAIRE

    PANIN, Nicolae; Giger, Walter

    2008-01-01

    The Romanian Ministry for Education, Research and Youth (MECT), the Swiss Agency for Development and Cooperation (SDC) and the Swiss National Science Foundation had launched in 2004 the Romanian-Swiss research programme known as “Environmental Science and Technology in Romania” (ESTROM). ESTROM was established as a pilot programme of scientific co-operation between Swiss Research and Education Units with similar ones from Romania in the fram...

  5. Design of Sugarcane Peeling Machine

    Directory of Open Access Journals (Sweden)

    Ge Xinfeng

    2015-02-01

    Full Text Available In order to solve the problem that appeared in hand peeling sugarcane, the sugarcane peeling machine is designed, the sugarcane peeling machine includes motor, groove wheel, cutting room, slider crank mechanism, reducer (including belt drive, chain drive and so on. The designed sugarcane peeling machine is simulated, the results show that the sugarcane peeling machine can peel sugarcane successfully with convenient, fast and uniform.

  6. Automatically-Programed Machine Tools

    Science.gov (United States)

    Purves, L.; Clerman, N.

    1985-01-01

    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  7. Automatically-Programed Machine Tools

    Science.gov (United States)

    Purves, L.; Clerman, N.

    1985-01-01

    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  8. Feature Recognition for Virtual Machining

    OpenAIRE

    Xú, Shixin; Anwer, Nabil; Qiao, Lihong

    2014-01-01

    International audience; Virtual machining uses software tools to simulate machining processes in virtual environments ahead of actual production. This paper proposes that feature recognition techniques can be applied in the course of virtual machining, such as identifying some process problems, and presenting corresponding correcting advices. By comparing with the original CAD model, form errors of the machining features can be found. And then corrections are suggested to process designers. T...

  9. No Swiss-cheese universe on the brane

    Science.gov (United States)

    Gergely, László Á.

    2005-04-01

    We study the possibility of brane-world generalization of the Einstein-Straus Swiss-cheese cosmological model. We find that the modifications induced by the brane-world scenario are excessively restrictive. At a first glance only the motion of the boundary is modified and the fluid in the exterior region is allowed to have pressure. The general relativistic Einstein-Straus model emerges in the low density limit. However by imposing that the central mass in the Schwarzschild voids is constant, a combination of the junction conditions and modified cosmological evolution leads to the conclusion that the brane is flat. Thus no generic Swiss-cheese universe can exist on the brane. The conclusion is not altered by the introduction of a cosmological constant in the FLRW regions. This shows that although allowed in the low density limit, the Einstein-Straus universe cannot emerge from cosmological evolution in the brane-world scenario.

  10. Swiss-cheese models and the Dyer-Roeder approximation

    Energy Technology Data Exchange (ETDEWEB)

    Fleury, Pierre, E-mail: fleury@iap.fr [Institut d' Astrophysique de Paris, UMR-7095 du CNRS, Université Pierre et Marie Curie, 98 bis, boulevard Arago, 75014 Paris (France)

    2014-06-01

    In view of interpreting the cosmological observations precisely, especially when they involve narrow light beams, it is crucial to understand how light propagates in our statistically homogeneous, clumpy, Universe. Among the various approaches to tackle this issue, Swiss-cheese models propose an inhomogeneous spacetime geometry which is an exact solution of Einstein's equation, while the Dyer-Roeder approximation deals with inhomogeneity in an effective way. In this article, we demonstrate that the distance-redshift relation of a certain class of Swiss-cheese models is the same as the one predicted by the Dyer-Roeder approach, at a well-controlled level of approximation. Both methods are therefore equivalent when applied to the interpretation of, e.g., supernova obervations. The proof relies on completely analytical arguments, and is illustrated by numerical results.

  11. Organizational issues in stroke treatment: The Swiss paradigm - Stroke units

    Directory of Open Access Journals (Sweden)

    Georgios K Matis

    2013-01-01

    Full Text Available Stroke represents the leading cause of acquired disability in adults and poses a tremendous socioeconomic burden both on patients and the society. In this sense, prompt diagnosis and urgent treatment are needed in order to radically reduce the devastating consequences of this disease. Herein the authors present the new guidelines recently adopted by the Swiss Stroke Society concerning the establishment of stroke units. Standardized treatment and allocation protocols along with an acute rehabilitation concept seem to be the core of the Swiss stroke management system. Coordinated multidisciplinary care provided by specialized medical, nursing and therapy staff is of utmost importance for achieving a significant dependency and death reduction. It is believed that the implementation of these guidelines in the stroke care system would be beneficial not only for the stroke patients, but also for the health system.

  12. The Materials Science beamline upgrade at the Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Willmott, P. R., E-mail: philip.willmott@psi.ch; Meister, D.; Leake, S. J.; Lange, M.; Bergamaschi, A. [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); and others

    2013-07-16

    The wiggler X-ray source of the Materials Science beamline at the Swiss Light Source has been replaced with a 14 mm-period cryogenically cooled in-vacuum undulator. In order to best exploit the increased brilliance of this new source, the entire front-end and optics have been redesigned. The Materials Science beamline at the Swiss Light Source has been operational since 2001. In late 2010, the original wiggler source was replaced with a novel insertion device, which allows unprecedented access to high photon energies from an undulator installed in a medium-energy storage ring. In order to best exploit the increased brilliance of this new source, the entire front-end and optics had to be redesigned. In this work, the upgrade of the beamline is described in detail. The tone is didactic, from which it is hoped the reader can adapt the concepts and ideas to his or her needs.

  13. Swiss Armed Forces Conscription and Militia System: Must They Change?

    Science.gov (United States)

    2013-12-13

    capacities must assume public duties and consequences in an extra professional and volunteer capacity. This expression specific to Switzerland is...by a solid link of trust. The author makes a side note that conscription is lucky, when it comes to pedagogy and relations in the Swiss society. In...Forces. Personal engagement, non- professional and time limited made by male and female citizens in order to accomplish public tasks allotted to the

  14. Insertion devices at the Swiss Light Source (phase I)

    CERN Document Server

    Schmidt, T; Imhof, A; Patterson, B D; Patthey, L; Quitmann, C; Schulze-Briese, C; Abela, R

    2001-01-01

    The insertion devices under construction for phase I of the Swiss Light Source (SLS) are described. Five undulators and one wiggler will be installed in four straight sections of the third generation 2.4 GeV SLS storage ring, under construction at the Paul Scherrer Institute. To provide undulator radiation in the energy range from 10 eV to 18 keV, both long period and short period, small gap undulators will be installed.

  15. Generalized Swiss-Cheese Cosmologies I: Mass Scales

    CERN Document Server

    Grenon, Cédric

    2009-01-01

    We generalize the Swiss-cheese cosmologies so as to include non-zero linear momenta of the associated boundary surfaces. The evolution of mass scales in these generalized cosmologies is studied for a variety of models for the background without having to specify any details within the local inhomogeneities. We find that the final effective gravitational mass and size of the evolving inhomogeneities depends on their linear momenta but these properties are essentially unaffected by the details of the background model.

  16. Modelling longevity bonds: Analysing the Swiss Re Kortis bond

    OpenAIRE

    2015-01-01

    A key contribution to the development of the traded market for longevity risk was the issuance of the Kortis bond, the world's first longevity trend bond, by Swiss Re in 2010. We analyse the design of the Kortis bond, develop suitable mortality models to analyse its payoff and discuss the key risk factors for the bond. We also investigate how the design of the Kortis bond can be adapted and extended to further develop the market for longevity risk.

  17. Reshuffling the pack in the Swiss hospital market.

    Science.gov (United States)

    Wegmüller, Bernard; Bienlein, Martin

    2011-01-01

    Swiss hospitals face two major changes: one is the introduction of DRG as the currency for payment and the other one is the shortage of personnel due to demographic changes. They will do so by strengthening their accounting systems to be able to calculate costs per patient. First steps to attract new personnel are taken withiin the new professional educational system. A third change, the evolving landscape of social health insurance companies, is hard to predict.

  18. Overview of rock glacier kinematics research in the Swiss Alps

    OpenAIRE

    Delaloye, R.; Lambiel, C; I. Gärtner-Roer

    2010-01-01

    The acceleration of rock glacier surface velocities over the two last decades and the destabilization of several landforms show that permafrost creep conditions are changing in the Alps. This article summarizes and presents current understanding of creep behaviour of rock glaciers in the Swiss Alps and emphasises changes that have occurred over the last years and decades. The almost homogeneous interannual behaviour of rock glaciers despite different geometry and activ...

  19. The Neural Support Vector Machine

    NARCIS (Netherlands)

    Wiering, Marco; van der Ree, Michiel; Embrechts, Mark; Stollenga, Marijn; Meijster, Arnold; Nolte, A; Schomaker, Lambertus

    2013-01-01

    This paper describes a new machine learning algorithm for regression and dimensionality reduction tasks. The Neural Support Vector Machine (NSVM) is a hybrid learning algorithm consisting of neural networks and support vector machines (SVMs). The output of the NSVM is given by SVMs that take a

  20. The Neural Support Vector Machine

    NARCIS (Netherlands)

    Wiering, Marco; van der Ree, Michiel; Embrechts, Mark; Stollenga, Marijn; Meijster, Arnold; Nolte, A; Schomaker, Lambertus

    2013-01-01

    This paper describes a new machine learning algorithm for regression and dimensionality reduction tasks. The Neural Support Vector Machine (NSVM) is a hybrid learning algorithm consisting of neural networks and support vector machines (SVMs). The output of the NSVM is given by SVMs that take a centr

  1. THE SWISS BALL AND ITS USE IN PHYSICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Niculescu Ionela

    2009-06-01

    Full Text Available Each Physical Education lesson begins by warming-up, a phase when the exercises must be nice andhave to eliminate the tension accumulated during the other classes. The Swiss balloon actions allow us to noticethe manner in which our body is capable of working in all three plans (forward, backwards, lateral.Before beginning training, it is especially important that we very well know the Swiss balloonsexercises, for these not only solicit the great muscular groups, but also the deeper ones, not forgetting themuscles from around joints.The unstable surface of the Swiss balloon forces us to focus on the stabilizing muscles. If this condition is not fulfilled, we are not able to practice any exercise. Right before each particular execution, the muscles of the energy center must be contracted. (the area surrounding the basin, the back and the bottom.The balloon shapes are adapted to the natural curves of the backbone and through their unstable surface force the body to establish equilibrium and keep this state of balance, the moves being perfectly coordinated

  2. Switzerland Committed to Innovation. The Swiss Network of Technology

    Directory of Open Access Journals (Sweden)

    Konrade von Bremen

    2005-06-01

    Full Text Available

    Switzerland showed its commitment to innovation in health care since the early 80th, implementing agencies and government units with the mission to promote and to appropriately govern innovation. The Swiss Network of Technology Assessment (SNHTA was founded in 1998.

    The aim is the promotion and implementation of Health Technology Assessment projects in Switzerland by providing a neutral forum for the identification and the pursuit of common interests. This includes the coordination, exchange and dissemination of experiences of HTA projects and the implementation of the results. The collaboration in international projects is a priority. Ultimately SNHTA has the goal to improve efficacy, cost effectiveness and social accountability. An inventory survey amongst the members confirmed a high level of diverse specialised competencies, mainly employed within the institution. Only 20% of the HTA specific competencies are used for external activities.

    The need for integration of all partners in the field of innovation in a network has been recognised by the Swiss government. This lead to the creation of a webplatform in which all players involved in the business of medical technologies are involved.

    This platform (swiss medtech, includes patients, insurers, industry, universities and professional organisations. The joined activities include agreements on intellectual property and the integrated patient care chain. New ways to connect players in innovation are needed to face the challenge of increasing costs and diminishing resources.

  3. The Concept of English Philologists’ Training at Swiss Universities

    Directory of Open Access Journals (Sweden)

    Zasluzhena Alla

    2016-06-01

    Full Text Available The issue of plurilingual approach usage to the study of foreign languages has been made actual on case study of Swiss universities. Basic concepts of English philologists’ formation at Swiss universities have been determined. These components have been analyzed with relation to their relevance to the prospective philologist in English Linguistics and Literature. The attention has been focused on the effectiveness of Swisss higher education up to the indicator “skills” (Global Information Technological Report 2014, Networked Readinnes Index, NRI according to the World Economic Forum on the development of information technologies in different countries. The emphasis has been made on mutual interaction between sectors of secondary and higher education, that contributes to the quality improvement of education in the country. Some steps in the process of modernization in primary and secondary education have been indicated, such as the usage of the Swiss version of the European Language Portfolio; development of “Profession-related Language Competence Profile for Foreign Language Teachers at Lower Secondary Schools”, “The Passepartout Language Teacher Profile”. Attention is paid to the following changes of teachers’ training: its belonging to tertiary study; mandatory practice-teach for English teachers in English-speaking countries, the required level of command of English language as admission to study in Bachelor and Master programs; capability to work in other linguistic regions, which in turn causes the requirements on quality assurance of particular region language proficiency according to the CEFR (Common European Framework of Reference for Languages.

  4. The SWISS-MODEL Repository—new features and functionality

    Science.gov (United States)

    Bienert, Stefan; Waterhouse, Andrew; de Beer, Tjaart A. P.; Tauriello, Gerardo; Studer, Gabriel; Bordoli, Lorenza; Schwede, Torsten

    2017-01-01

    SWISS-MODEL Repository (SMR) is a database of annotated 3D protein structure models generated by the automated SWISS-MODEL homology modeling pipeline. It currently holds >400 000 high quality models covering almost 20% of Swiss-Prot/UniProtKB entries. In this manuscript, we provide an update of features and functionalities which have been implemented recently. We address improvements in target coverage, model quality estimates, functional annotations and improved in-page visualization. We also introduce a new update concept which includes regular updates of an expanded set of core organism models and UniProtKB-based targets, complemented by user-driven on-demand update of individual models. With the new release of the modeling pipeline, SMR has implemented a REST-API and adopted an open licencing model for accessing model coordinates, thus enabling bulk download for groups of targets fostering re-use of models in other contexts. SMR can be accessed at https://swissmodel.expasy.org/repository. PMID:27899672

  5. Prediction of Machine Tool Condition Using Support Vector Machine

    Science.gov (United States)

    Wang, Peigong; Meng, Qingfeng; Zhao, Jian; Li, Junjie; Wang, Xiufeng

    2011-07-01

    Condition monitoring and predicting of CNC machine tools are investigated in this paper. Considering the CNC machine tools are often small numbers of samples, a condition predicting method for CNC machine tools based on support vector machines (SVMs) is proposed, then one-step and multi-step condition prediction models are constructed. The support vector machines prediction models are used to predict the trends of working condition of a certain type of CNC worm wheel and gear grinding machine by applying sequence data of vibration signal, which is collected during machine processing. And the relationship between different eigenvalue in CNC vibration signal and machining quality is discussed. The test result shows that the trend of vibration signal Peak-to-peak value in surface normal direction is most relevant to the trend of surface roughness value. In trends prediction of working condition, support vector machine has higher prediction accuracy both in the short term ('One-step') and long term (multi-step) prediction compared to autoregressive (AR) model and the RBF neural network. Experimental results show that it is feasible to apply support vector machine to CNC machine tool condition prediction.

  6. Proposal for the negotiation of a new contract for the production and machining of non-isotropic composite bars for the ATLAS collaboration

    CERN Document Server

    1999-01-01

    This document concerns the negotiation of a new contract for the production and machining of non-isotropic composite bars for the ATLAS Collaboration, based on the results of the call for tenders IT-2410/PPE/ATL dated 28 April 1997. For the reasons set out in this document, the Finance Committee is invited to approve the negotiation of a contract with VON ROLL ISOLA (CH), the second lowest bidder for call for tenders IT-2410/PPE/ATL, for the production and machining of 4 200 non-isotropic composite bars for a total amount not exceeding 2 600 000 Swiss francs, not subject to revision.

  7. A Boltzmann machine for the organization of intelligent machines

    Science.gov (United States)

    Moed, Michael C.; Saridis, George N.

    1989-01-01

    In the present technological society, there is a major need to build machines that would execute intelligent tasks operating in uncertain environments with minimum interaction with a human operator. Although some designers have built smart robots, utilizing heuristic ideas, there is no systematic approach to design such machines in an engineering manner. Recently, cross-disciplinary research from the fields of computers, systems AI and information theory has served to set the foundations of the emerging area of the design of intelligent machines. Since 1977 Saridis has been developing an approach, defined as Hierarchical Intelligent Control, designed to organize, coordinate and execute anthropomorphic tasks by a machine with minimum interaction with a human operator. This approach utilizes analytical (probabilistic) models to describe and control the various functions of the intelligent machine structured by the intuitively defined principle of Increasing Precision with Decreasing Intelligence (IPDI) (Saridis 1979). This principle, even though resembles the managerial structure of organizational systems (Levis 1988), has been derived on an analytic basis by Saridis (1988). The purpose is to derive analytically a Boltzmann machine suitable for optimal connection of nodes in a neural net (Fahlman, Hinton, Sejnowski, 1985). Then this machine will serve to search for the optimal design of the organization level of an intelligent machine. In order to accomplish this, some mathematical theory of the intelligent machines will be first outlined. Then some definitions of the variables associated with the principle, like machine intelligence, machine knowledge, and precision will be made (Saridis, Valavanis 1988). Then a procedure to establish the Boltzmann machine on an analytic basis will be presented and illustrated by an example in designing the organization level of an Intelligent Machine. A new search technique, the Modified Genetic Algorithm, is presented and proved

  8. Bi-directional charger for swiss2G - Annual report; Bi-directional charger for swiss2G - Jahresbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schwab, M.; Baumann, P.

    2010-11-15

    This short annual report for 2010 for the Swiss Federal Office of Energy (SFOE) takes a look at a bi-directional charger that can be used in intelligent 'Smart Grid' applications. The idea is based on being able to use electric vehicles as a source of electricity to help meet peak demand for mains electricity. The swiss2G project aims to produce an electric car battery-charger that also functions as an inverter to convert the car's DC battery voltage to mains electricity. The project was started in September 2010. The report describes the aims of the project and reports on initial work done in the areas of safety, switching electronics and AC/DC conversion. National and international co-operation is noted and prospects for further work are discussed.

  9. Engineering molecular machines

    Science.gov (United States)

    Erman, Burak

    2016-04-01

    Biological molecular motors use chemical energy, mostly in the form of ATP hydrolysis, and convert it to mechanical energy. Correlated thermal fluctuations are essential for the function of a molecular machine and it is the hydrolysis of ATP that modifies the correlated fluctuations of the system. Correlations are consequences of the molecular architecture of the protein. The idea that synthetic molecular machines may be constructed by designing the proper molecular architecture is challenging. In their paper, Sarkar et al (2016 New J. Phys. 18 043006) propose a synthetic molecular motor based on the coarse grained elastic network model of proteins and show by numerical simulations that motor function is realized, ranging from deterministic to thermal, depending on temperature. This work opens up a new range of possibilities of molecular architecture based engine design.

  10. Boosting Support Vector Machines

    Directory of Open Access Journals (Sweden)

    Elkin Eduardo García Díaz

    2006-11-01

    Full Text Available En este artículo, se presenta un algoritmo de clasificación binaria basado en Support Vector Machines (Máquinas de Vectores de Soporte que combinado apropiadamente con técnicas de Boosting consigue un mejor desempeño en cuanto a tiempo de entrenamiento y conserva características similares de generalización con un modelo de igual complejidad pero de representación más compacta./ In this paper we present an algorithm of binary classification based on Support Vector Machines. It is combined with a modified Boosting algorithm. It run faster than the original SVM algorithm with a similar generalization error and equal complexity model but it has more compact representation.

  11. Quo vadis, Intelligent Machine?

    Directory of Open Access Journals (Sweden)

    Rosemarie Velik

    2010-09-01

    Full Text Available Artificial Intelligence (AI is a branch of computer science concerned with making computers behave like humans. At least this was the original idea. However, it turned out that this is no task easy to be solved. This article aims to give a comprehensible review on the last 60 years of artificial intelligence taking a philosophical viewpoint. It is outlined what happened so far in AI, what is currently going on in this research area, and what can be expected in future. The goal is to mediate an understanding for the developments and changes in thinking in course of time about how to achieve machine intelligence. The clear message is that AI has to join forces with neuroscience and other brain disciplines in order to make a step towards the development of truly intelligent machines.

  12. Introduction to Machine Protection

    CERN Document Server

    Schmidt, R

    2016-01-01

    Protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent, although there was one paper that discussed beam-induced damage for the SLAC linac (Stanford Linear Accelerator Center) as early as in 1967. It is related to the increasing beam power of high-power proton accelerators, to the emission of synchrotron light by electron-positron accelerators and to the increase of energy stored in the beam. Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping ...

  13. Technological requirements of profile machining

    Institute of Scientific and Technical Information of China (English)

    PARK Sangchul; CHUNG Yunchan

    2006-01-01

    The term ‘profile machining’is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flangedies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control,minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.

  14. Machining fiber-reinforced composites

    Science.gov (United States)

    Komanduri, Ranga

    1993-04-01

    Compared to high tool wear and high costs of tooling of fiber-reinforced composites (FRCs), noncontact material-removal processes offer attractive alternative. Noncontact machining methods can also minimize dust, noise, and extensive plastic deformation and consequent heat generation associated with conventional machining of FRCs, espacially those with an epoxy matrix. The paper describes the principles involved in and the details of machining of FRCs by laser machining, water jet-cutting and abrasive water jet-cutting, and electrical discharge machining of composites, as well as the limitations of each method.

  15. Future database machine architectures

    OpenAIRE

    Hsiao, David K.

    1984-01-01

    There are many software database management systems available on many general-purpose computers ranging from micros to super-mainframes. Database machines as backened computers can offload the database management work from the mainframe so that we can retain the same mainframe longer. However, the database backend must also demonstrate lower cost, higher performance, and newer functionality. Some of the fundamental architecture issues in the design of high-performance and great-capacity datab...

  16. Machine Learning at Scale

    OpenAIRE

    Izrailev, Sergei; Stanley, Jeremy M.

    2014-01-01

    It takes skill to build a meaningful predictive model even with the abundance of implementations of modern machine learning algorithms and readily available computing resources. Building a model becomes challenging if hundreds of terabytes of data need to be processed to produce the training data set. In a digital advertising technology setting, we are faced with the need to build thousands of such models that predict user behavior and power advertising campaigns in a 24/7 chaotic real-time p...

  17. Cost of photochemical machining

    OpenAIRE

    Roy, Rajkumar; Allen, David; Zamora, Oscar

    2004-01-01

    Photochemical machining (PCM), also known as photoetching, photofabrication or photochemical milling, is a non-traditional manufacturing method based on the combination of photoresist imaging and chemical etching. PCM uses techniques similar to those employed for the production of printed circuit boards and silicon integrated circuits. The PCM industry plays a valuable worldwide role in the production of metal precision parts and decorative items. Parts produced by PCM are t...

  18. Austempered Ductile Iron Machining

    Science.gov (United States)

    Pilc, Jozef; Šajgalík, Michal; Holubják, Jozef; Piešová, Marianna; Zaušková, Lucia; Babík, Ondrej; Kuždák, Viktor; Rákoci, Jozef

    2015-12-01

    This article deals with the machining of cast iron. In industrial practice, Austempered Ductile Iron began to be used relatively recently. ADI is ductile iron that has gone through austempering to get improved properties, among which we can include strength, wear resistance or noise damping. This specific material is defined also by other properties, such as high elasticity, ductility and endurance against tenigue, which are the properties, that considerably make the tooling characteristic worse.

  19. Quantum Virtual Machine (QVM)

    Energy Technology Data Exchange (ETDEWEB)

    2016-11-18

    There is a lack of state-of-the-art HPC simulation tools for simulating general quantum computing. Furthermore, there are no real software tools that integrate current quantum computers into existing classical HPC workflows. This product, the Quantum Virtual Machine (QVM), solves this problem by providing an extensible framework for pluggable virtual, or physical, quantum processing units (QPUs). It enables the execution of low level quantum assembly codes and returns the results of such executions.

  20. Agent Based Computing Machine

    Science.gov (United States)

    2005-12-09

    be used in Phase 2 to accomplish the following enhancements. Due to the speed and support of MPI for C/C++ on Beowulf clusters , these languages could...1.7 ABC Machine Formal Definition 24 1.8 Computational Analysis 31 1.9 Programming Concepts 34 1.10 Cluster Mapping 38 1.11 Phase 1 Results 43 2...options for hardware implementation are explored including an emulation with a high performance cluster , a high performance silicon chip and the

  1. Magnetic Electrochemical Finishing Machining

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    How to improve the finishing efficiency and surface roughness have been all along the objective of research in electrochemical polishing. However, the research activity, i.e. during electrochemical polishing, directly introduce the magnetic field to study how the magnetic field influences on the finishing efficiency, quality and the electrochemical process in the field of finishing machining technology, is insufficient. When introducing additional magnetic field in the traditional electrochemical pol...

  2. FMS precision machining

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, M.W.

    1980-01-01

    In evaluating the technical obstacles and accuracy limits to producing a Precision Flexible Manufacturing System, a current system is subjected to an error budget analysis. It is noted that to make complex part geometries with tolerances in the lower thousandths range, machining to tenths is required for process control. Actual parts made to tenths are illustrated, along with a discussion of the requirements for automation and for process control.

  3. Machine on Trial

    Science.gov (United States)

    2012-06-01

    front of the Judge, how did we come to justify the ethical use of such a machine? The Judge called for a recess so that he could further educate ...commerce, where money would change hands, or for the purposes of controlling critical systems.”29 The initial group that set up the ARPANET did not... EBook of Fundamental Principals of the Metaphysic of Morals, May, 2004 [ EBook #5682 translated by Thomas Kingsmill Abbott, 12. http://manybooks.net

  4. Electrochemical Discharge Machining Process

    Directory of Open Access Journals (Sweden)

    Anjali V. Kulkarni

    2007-09-01

    Full Text Available Electrochemical discharge machining process is evolving as a promising micromachiningprocess. The experimental investigations in the present work substantiate this trend. In the presentwork, in situ, synchronised, transient temperature and current measurements have been carriedout. The need for the transient measurements arose due to the time-varying nature of the dischargeformation and time varying circuit current. Synchronised and transient measurements revealedthe discrete nature of the process. It also helped in formulating the basic mechanism for thedischarge formation and the material removal in the process. Temperature profile on workpieceand in electrochemical discharge machining cell is experimentally measured using pyrometer,and two varieties of K-type thermocouples. Surface topography of the discharge-affected zoneson the workpiece has been carried out using scanning electron microscope. Measurements andsurface topographical studies reveal the potential use of this process for machining in micronregime. With careful experimental set-up design, suitable supply voltage and its polarity, theprocess can be applied for both micromachining and micro-deposition. It can be extended formachining and or deposition of wide range of materials.

  5. Introduction: Minds, Bodies, Machines

    Directory of Open Access Journals (Sweden)

    Deirdre Coleman

    2008-10-01

    Full Text Available This issue of 19 brings together a selection of essays from an interdisciplinary conference on 'Minds, Bodies, Machines' convened last year by Birkbeck's Centre for Nineteenth-Century Studies, University of London, in partnership with the English programme, University of Melbourne and software developers Constraint Technologies International (CTI. The conference explored the relationship between minds, bodies and machines in the long nineteenth century, with a view to understanding the history of our technology-driven, post-human visions. It is in the nineteenth century that the relationship between the human and the machine under post-industrial capitalism becomes a pervasive theme. From Blake on the mills of the mind by which we are enslaved, to Carlyle's and Arnold's denunciation of the machinery of modern life, from Dickens's sooty fictional locomotive Mr Pancks, who 'snorted and sniffed and puffed and blew, like a little labouring steam-engine', and 'shot out […]cinders of principles, as if it were done by mechanical revolvency', to the alienated historical body of the late-nineteenth-century factory worker under Taylorization, whose movements and gestures were timed, regulated and rationalised to maximize efficiency; we find a cultural preoccupation with the mechanisation of the nineteenth-century human body that uncannily resonates with modern dreams and anxieties around technologies of the human.

  6. Machine Learning in Medicine.

    Science.gov (United States)

    Deo, Rahul C

    2015-11-17

    Spurred by advances in processing power, memory, storage, and an unprecedented wealth of data, computers are being asked to tackle increasingly complex learning tasks, often with astonishing success. Computers have now mastered a popular variant of poker, learned the laws of physics from experimental data, and become experts in video games - tasks that would have been deemed impossible not too long ago. In parallel, the number of companies centered on applying complex data analysis to varying industries has exploded, and it is thus unsurprising that some analytic companies are turning attention to problems in health care. The purpose of this review is to explore what problems in medicine might benefit from such learning approaches and use examples from the literature to introduce basic concepts in machine learning. It is important to note that seemingly large enough medical data sets and adequate learning algorithms have been available for many decades, and yet, although there are thousands of papers applying machine learning algorithms to medical data, very few have contributed meaningfully to clinical care. This lack of impact stands in stark contrast to the enormous relevance of machine learning to many other industries. Thus, part of my effort will be to identify what obstacles there may be to changing the practice of medicine through statistical learning approaches, and discuss how these might be overcome.

  7. Behind the machines

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    One of the first things we think about when someone mentions physics is the machines. But behind the machines, there are the men and women who design, build and operate them. In an exhibition at the Thinktank planetarium’s art gallery in Birmingham (UK), Claudia Marcelloni and her husband Neal Hartman—she is a photographer and Outreach Officer for ATLAS, while he is an engineer working on the ATLAS pixel detector—explore the human side of scientists.   The exhibition at the Thinktank Planetarium art gallery, Birmingham (UK). It all began two years ago with the publication of Exploring the mystery of matter, a book about ATLAS. “A Norwegian physicist friend, Heidi Sandaker, saw my photographs and suggested that I display them in a museum. I thought this was an interesting idea, except that the photos consisted entirely of depictions of machinery, with human beings completely absent. For me, showing the people who are behind the machines and the fascination ...

  8. Soft computing in machine learning

    CERN Document Server

    Park, Jooyoung; Inoue, Atsushi

    2014-01-01

    As users or consumers are now demanding smarter devices, intelligent systems are revolutionizing by utilizing machine learning. Machine learning as part of intelligent systems is already one of the most critical components in everyday tools ranging from search engines and credit card fraud detection to stock market analysis. You can train machines to perform some things, so that they can automatically detect, diagnose, and solve a variety of problems. The intelligent systems have made rapid progress in developing the state of the art in machine learning based on smart and deep perception. Using machine learning, the intelligent systems make widely applications in automated speech recognition, natural language processing, medical diagnosis, bioinformatics, and robot locomotion. This book aims at introducing how to treat a substantial amount of data, to teach machines and to improve decision making models. And this book specializes in the developments of advanced intelligent systems through machine learning. It...

  9. Machine Translation Effect on Communication

    DEFF Research Database (Denmark)

    Jensen, Mika Yasuoka; Bjørn, Pernille

    2011-01-01

    Intercultural collaboration facilitated by machine translation has gradually spread in various settings. Still, little is known as for the practice of machine-translation mediated communication. This paper investigates how machine translation affects intercultural communication in practice. Based...... determines communication process largely, our data indicates communication relies more on a dynamic process where participants establish common ground than on reproducibility and grammatical accuracy.......Intercultural collaboration facilitated by machine translation has gradually spread in various settings. Still, little is known as for the practice of machine-translation mediated communication. This paper investigates how machine translation affects intercultural communication in practice. Based...... on communication in which multilingual communication system is applied, we identify four communication types and its’ influences on stakeholders’ communication process, especially focusing on establishment and maintenance of common ground. Different from our expectation that quality of machine translation results...

  10. Tumor induction in Swiss mice by filtrable agent and Salmonella typhimurium.

    Directory of Open Access Journals (Sweden)

    Hamazaki,Yukio

    1979-10-01

    Full Text Available Combined inoculation of a cell-free extract of leukotic tissue of D103 mice and Salmonella typhimurium into adult Swiss mice induced leukosis and solid tumors. The induced solid tumors were histologically multifarious, and were transplantable in Swiss mice, but not in other strains of mice.

  11. The role of skin self-examination at the Swiss skin cancer day

    NARCIS (Netherlands)

    Badertscher, N.; Meier, M.; Rosemann, T.; Braun, R.; Cozzio, A.; Tag, B.; Wensing, M.; Tandjung, R.

    2014-01-01

    BACKGROUND: The rising incidence of melanoma - Switzerland has the highest incidence in Europe - is a major public health challenge. Swiss dermatologist introduced the "Swiss Skin Cancer Day" (SSCD) in 2006, which provides skin cancer screening at no costs. The aim of the study was to describe the

  12. 26 CFR 509.106 - Control of a United States enterprise by a Swiss enterprise.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 19 2010-04-01 2010-04-01 false Control of a United States enterprise by a Swiss enterprise. 509.106 Section 509.106 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE... a United States enterprise by a Swiss enterprise. In effect, Article IV of the convention provides...

  13. The role of skin self-examination at the Swiss skin cancer day

    NARCIS (Netherlands)

    Badertscher, N.; Meier, M.; Rosemann, T.; Braun, R.; Cozzio, A.; Tag, B.; Wensing, M.; Tandjung, R.

    2014-01-01

    BACKGROUND: The rising incidence of melanoma - Switzerland has the highest incidence in Europe - is a major public health challenge. Swiss dermatologist introduced the "Swiss Skin Cancer Day" (SSCD) in 2006, which provides skin cancer screening at no costs. The aim of the study was to describe the p

  14. Mineral mining machines

    Energy Technology Data Exchange (ETDEWEB)

    Mc Gaw, B.H.

    1984-01-01

    A machine for mining minerals is patented. It is a cutter loader with a drum actuating element of the worm type equipped with a multitude of cutting teeth reinforced with tungsten carbide. A feature of the patented machine is that all of the cutting teeth and holders on the drum have the identical design. This is achieved through selecting a slant angle for the cutting teeth which is the mean between the slant angle of the conventional radial teeth and the slant angle of the advance teeth. This, in turn, is provided thanks to the corresponding slant of the holders relative to the drum and (or) the slant of the cutting part of the teeth relative to their stems. Thus, the advance teeth projecting beyond the surface of the drum on the face side and providing upper and lateral clearances have the same angle of attack as the radial teeth, that is, from 20 to 35 degrees. A series of modifications of the cutting teeth is patented. One of the designs allows the cutting tooth to occupy a varying position relative to the drum, from the conventional vertical to an inverted, axially projecting position. In the last case the tooth in the extraction process provides the upper and lateral clearances for the drum on the face side. Among the different modifications of the cutting teeth, a design is proposed which provides for the presence of a stem which is shaped like a truncated cone. This particular stem is designed for use jointly with a wedge which unfastens the teeth and is placed in a holder. The latter is completed in a transverse slot thanks to which the rear end of the stem is compressed, which simplifies replacement of a tooth. Channels are provided in the patented machine for feeding water to the worm spiral, the holders and the cutting teeth themselves in order to deal with dust.

  15. Advanced Machine learning Algorithm Application for Rotating Machine Health Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Kanemoto, Shigeru; Watanabe, Masaya [The University of Aizu, Aizuwakamatsu (Japan); Yusa, Noritaka [Tohoku University, Sendai (Japan)

    2014-08-15

    The present paper tries to evaluate the applicability of conventional sound analysis techniques and modern machine learning algorithms to rotating machine health monitoring. These techniques include support vector machine, deep leaning neural network, etc. The inner ring defect and misalignment anomaly sound data measured by a rotating machine mockup test facility are used to verify the above various kinds of algorithms. Although we cannot find remarkable difference of anomaly discrimination performance, some methods give us the very interesting eigen patterns corresponding to normal and abnormal states. These results will be useful for future more sensitive and robust anomaly monitoring technology.

  16. Diamond Measuring Machine

    Energy Technology Data Exchange (ETDEWEB)

    Krstulic, J.F.

    2000-01-27

    The fundamental goal of this project was to develop additional capabilities to the diamond measuring prototype, work out technical difficulties associated with the original device, and perform automated measurements which are accurate and repeatable. For this project, FM and T was responsible for the overall system design, edge extraction, and defect extraction and identification. AccuGem provided a lab and computer equipment in Lawrence, 3D modeling, industry expertise, and sets of diamonds for testing. The system executive software which controls stone positioning, lighting, focusing, report generation, and data acquisition was written in Microsoft Visual Basic 6, while data analysis and modeling were compiled in C/C++ DLLs. All scanning parameters and extracted data are stored in a central database and available for automated analysis and reporting. The Phase 1 study showed that data can be extracted and measured from diamond scans, but most of the information had to be manually extracted. In this Phase 2 project, all data required for geometric modeling and defect identification were automatically extracted and passed to a 3D modeling module for analysis. Algorithms were developed which automatically adjusted both light levels and stone focus positioning for each diamond-under-test. After a diamond is analyzed and measurements are completed, a report is printed for the customer which shows carat weight, summarizes stone geometry information, lists defects and their size, displays a picture of the diamond, and shows a plot of defects on a top view drawing of the stone. Initial emphasis of defect extraction was on identification of feathers, pinpoints, and crystals. Defects were plotted color-coded by industry standards for inclusions (red), blemishes (green), and unknown defects (blue). Diamonds with a wide variety of cut quality, size, and number of defects were tested in the machine. Edge extraction, defect extraction, and modeling code were tested for

  17. Tribology in machine design

    CERN Document Server

    Stolarski, T A

    1990-01-01

    Tribology in Machine Design aims to promote a better appreciation of the increasingly important role played by tribology at the design stage in engineering. This book shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications. The concept of tribodesign is introduced in Chapter 1. Chapter 2 is devoted to a brief discussion of the basic principles of tribology, including some concepts and models of lubricated wear and friction under complex kinematic conditions. Elements of contact mechanics, presented in Chapter 3, are confined to the

  18. Quantum adiabatic machine learning

    CERN Document Server

    Pudenz, Kristen L

    2011-01-01

    We develop an approach to machine learning and anomaly detection via quantum adiabatic evolution. In the training phase we identify an optimal set of weak classifiers, to form a single strong classifier. In the testing phase we adiabatically evolve one or more strong classifiers on a superposition of inputs in order to find certain anomalous elements in the classification space. Both the training and testing phases are executed via quantum adiabatic evolution. We apply and illustrate this approach in detail to the problem of software verification and validation.

  19. Daphne machine project

    Energy Technology Data Exchange (ETDEWEB)

    Vignola, G. and Daphne Project Team [Istituto Nazionale di Fisica Nucleare, Frascati (Italy)

    1996-07-01

    Daphne, a high luminosity e{sup +}/e{sup -} {Phi} factory, is presently under construction in Frascati. The beginning of the collider commissioning is scheduled by winter 1997, with a short term luminosity goal L=1.3 10{sup 32} cm{sup -2} sec{sup -1}. Daphne shall be the first of the new generation of very high luminosity colliders, called factories, to come in operation. Other factories under construction are PEP-II and KEK-B: first collision, for both machines, is planned for 1998.

  20. CENTRIFUGAL CASTING MACHINE

    Science.gov (United States)

    Shuck, A.B.

    1958-04-01

    A device is described that is specifically designed to cast uraniumn fuel rods in a vacuunn, in order to obtain flawless, nonoxidized castings which subsequently require a maximum of machining or wastage of the expensive processed material. A chamber surrounded with heating elements is connected to the molds, and the entire apparatus is housed in an airtight container. A charge of uranium is placed in the chamber, heated, then is allowed to flow into the molds While being rotated. Water circulating through passages in the molds chills the casting to form a fine grained fuel rod in nearly finished form.

  1. Electrical machines with Matlab

    CERN Document Server

    Gonen, Turan

    2011-01-01

    Basic ConceptsDistribution SystemImpact of Dispersed Storage and GenerationBrief Overview of Basic Electrical MachinesReal and Reactive Powers in Single-Phase AC CircuitsThree-Phase CircuitsThree-Phase SystemsUnbalanced Three-Phase LoadsMeasurement of Average Power in Three-Phase CircuitsPower Factor CorrectionMagnetic CircuitsMagnetic Field of Current-Carrying ConductorsAmpère's Magnetic Circuital LawMagnetic CircuitsMagnetic Circuit with Air GapBrief Review of FerromagnetismMagnetic Core LossesHow to Determine Flux for a Given MMFPermanent MagnetsTransformersTransformer ConstructionBrief Rev

  2. Machining of Complex Sculptured Surfaces

    CERN Document Server

    2012-01-01

    The machining of complex sculptured surfaces is a global technological topic in modern manufacturing with relevance in both industrialized and emerging in countries particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with  high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ra...

  3. Learning thermodynamics with Boltzmann machines

    Science.gov (United States)

    Torlai, Giacomo; Melko, Roger G.

    2016-10-01

    A Boltzmann machine is a stochastic neural network that has been extensively used in the layers of deep architectures for modern machine learning applications. In this paper, we develop a Boltzmann machine that is capable of modeling thermodynamic observables for physical systems in thermal equilibrium. Through unsupervised learning, we train the Boltzmann machine on data sets constructed with spin configurations importance sampled from the partition function of an Ising Hamiltonian at different temperatures using Monte Carlo (MC) methods. The trained Boltzmann machine is then used to generate spin states, for which we compare thermodynamic observables to those computed by direct MC sampling. We demonstrate that the Boltzmann machine can faithfully reproduce the observables of the physical system. Further, we observe that the number of neurons required to obtain accurate results increases as the system is brought close to criticality.

  4. Massive machine to crack tiny nut

    CERN Multimedia

    Sample, Ian

    2006-01-01

    "At security posts dotted around swiss fields between the Jura Mountains and Lake Geneva, scientists are installing hi-tech retina scans above shafts descending 80 metres to the world's largest scientific instrument."

  5. Machine learning with R cookbook

    CERN Document Server

    Chiu, Yu-Wei

    2015-01-01

    If you want to learn how to use R for machine learning and gain insights from your data, then this book is ideal for you. Regardless of your level of experience, this book covers the basics of applying R to machine learning through to advanced techniques. While it is helpful if you are familiar with basic programming or machine learning concepts, you do not require prior experience to benefit from this book.

  6. Machine learning in healthcare informatics

    CERN Document Server

    Acharya, U; Dua, Prerna

    2014-01-01

    The book is a unique effort to represent a variety of techniques designed to represent, enhance, and empower multi-disciplinary and multi-institutional machine learning research in healthcare informatics. The book provides a unique compendium of current and emerging machine learning paradigms for healthcare informatics and reflects the diversity, complexity and the depth and breath of this multi-disciplinary area. The integrated, panoramic view of data and machine learning techniques can provide an opportunity for novel clinical insights and discoveries.

  7. Autocoding State Machine in Erlang

    DEFF Research Database (Denmark)

    Guo, Yu; Hoffman, Torben; Gunder, Nicholas

    2008-01-01

    This paper presents an autocoding tool suit, which supports development of state machine in a model-driven fashion, where models are central to all phases of the development process. The tool suit, which is built on the Eclipse platform, provides facilities for the graphical specification...... of a state machine model. Once the state machine is specified, it is used as input to a code generation engine that generates source code in Erlang....

  8. Efficiency potential of hot-drink dispensing machines in commercial catering; Effizienzpotenzial bei Heissgetraenkeautomaten in der Betriebsverpflegung

    Energy Technology Data Exchange (ETDEWEB)

    Grieder, T.; Huser, A. [Encontrol GmbH, Niederrohrdorf (Switzerland); Schmitz, R. [Electrosuisse, Fehraltorf (Switzerland)

    2003-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses the findings of a project that looked into the energy consumption of automatic hot-drink dispensing machines. The report presents the results of a survey made in Switzerland together with various manufacturers and operators of such machines that are used in the company refreshments sector. The survey provides important information on the current market situation, markets and market shares of individual operating companies as well as on machine technology and energy consumption. Also, obstacles to the improvement of energy efficiency in this area are looked at. Important savings that can be made in the operation of such machines are quoted. The report recommends that the results of a parallel survey of domestic coffee-making machines be taken note of and that effort should rather be concentrated in this area, where energy consumption at the national level is quoted as being around twice as high as for the commercial automatic hot-drink dispensing machines.

  9. Efficiency potential of hot-drink dispensing machines in commercial catering. Appendix; Effizienzpotenzial bei Heissgetraenkeautomaten in der Betriebsverpflegung. Anhang

    Energy Technology Data Exchange (ETDEWEB)

    Grieder, T.; Huser, A. [Encontrol GmbH, Niederrohrdorf (Switzerland); Schmitz, R. [Electrosuisse, Fehraltorf (Switzerland)

    2003-07-01

    This is the appendix of the final report with report number ENET--230304. This final report for the Swiss Federal Office of Energy (SFOE) discusses the findings of a project that looked into the energy consumption of automatic hot-drink dispensing machines. The report presents the results of a survey made in Switzerland together with various manufacturers and operators of such machines that are used in the company refreshments sector. The survey provides important information on the current market situation, markets and market shares of individual operating companies as well as on machine technology and energy consumption. Also, obstacles to the improvement of energy efficiency in this area are looked at. Important savings that can be made in the operation of such machines are quoted. The report recommends that the results of a parallel survey of domestic coffee-making machines be taken note of and that effort should rather be concentrated in this area, where energy consumption at the national level is quoted as being around twice as high as for the commercial automatic hot-drink dispensing machines.

  10. Stacked Extreme Learning Machines.

    Science.gov (United States)

    Zhou, Hongming; Huang, Guang-Bin; Lin, Zhiping; Wang, Han; Soh, Yeng Chai

    2015-09-01

    Extreme learning machine (ELM) has recently attracted many researchers' interest due to its very fast learning speed, good generalization ability, and ease of implementation. It provides a unified solution that can be used directly to solve regression, binary, and multiclass classification problems. In this paper, we propose a stacked ELMs (S-ELMs) that is specially designed for solving large and complex data problems. The S-ELMs divides a single large ELM network into multiple stacked small ELMs which are serially connected. The S-ELMs can approximate a very large ELM network with small memory requirement. To further improve the testing accuracy on big data problems, the ELM autoencoder can be implemented during each iteration of the S-ELMs algorithm. The simulation results show that the S-ELMs even with random hidden nodes can achieve similar testing accuracy to support vector machine (SVM) while having low memory requirements. With the help of ELM autoencoder, the S-ELMs can achieve much better testing accuracy than SVM and slightly better accuracy than deep belief network (DBN) with much faster training speed.

  11. Interaction with Machine Improvisation

    Science.gov (United States)

    Assayag, Gerard; Bloch, George; Cont, Arshia; Dubnov, Shlomo

    We describe two multi-agent architectures for an improvisation oriented musician-machine interaction systems that learn in real time from human performers. The improvisation kernel is based on sequence modeling and statistical learning. We present two frameworks of interaction with this kernel. In the first, the stylistic interaction is guided by a human operator in front of an interactive computer environment. In the second framework, the stylistic interaction is delegated to machine intelligence and therefore, knowledge propagation and decision are taken care of by the computer alone. The first framework involves a hybrid architecture using two popular composition/performance environments, Max and OpenMusic, that are put to work and communicate together, each one handling the process at a different time/memory scale. The second framework shares the same representational schemes with the first but uses an Active Learning architecture based on collaborative, competitive and memory-based learning to handle stylistic interactions. Both systems are capable of processing real-time audio/video as well as MIDI. After discussing the general cognitive background of improvisation practices, the statistical modelling tools and the concurrent agent architecture are presented. Then, an Active Learning scheme is described and considered in terms of using different improvisation regimes for improvisation planning. Finally, we provide more details about the different system implementations and describe several performances with the system.

  12. Survey and alignment for the Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Wei, F.Q.; Dreyer, K.; Fehlmann, U.; Pochon, J.L.; Wrulich, A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-07-01

    The Swiss Light Source (SLS) is a dedicated high brightness synchrotron light source currently under construction at the Paul Scherrer Institute (PSI) in Villigen. It will be commissioned in 2001. The accelerator complex includes a 2.4 GeV electron storage ring (SR) with 288 in circumference, a full energy injection booster synchrotron (Booster) and a 100 MeV linear pre-accelerator. The general alignment method and first results of the network measurements are presented. A laser tracker LTD500 is mainly adopted for network measurements and the alignment of storage ring components. (authors)

  13. Factors related to treatment intensity in Swiss primary care

    Directory of Open Access Journals (Sweden)

    Künzi Beat

    2009-03-01

    Full Text Available Abstract Background Questions about the existence of supplier-induced demand emerge repeatedly in discussions about governing Swiss health care. This study therefore aimed to evaluate the interrelationship between structural factors of supply and the volume of services that are provided by primary care physicians in Switzerland. Methods The study was designed as a cross-sectional investigation, based on the complete claims data from all Swiss health care insurers for the year 2004, which covered information from 6087 primary care physicians and 4.7 million patients. Utilization-based health service areas were constructed and used as spatial units to analyze effects of density of supply. Hierarchical linear models were applied to analyze the data. Results The data showed that, within a service area, a higher density of primary care physicians was associated with higher mortality rates and specialist density but not with treatment intensity in primary care. Higher specialist density was weakly associated with higher mortality rates and with higher treatment intensity density of primary care physicians. Annual physician-level data indicate a disproportionate increase of supplied services irrespective of the size of the number of patients treated during the same year and, even in high volume practices, no rationing but a paradoxical inducement of consultations occurred. The results provide empirical evidence that higher densities of primary care physicians, specialists and the availability of out-patient hospital clinics in a given area are associated with higher volume of supplied services per patient in primary care practices. Analyses stratified by language regions showed differences that emphasize the effect of the cantonal based (fragmented governance of Swiss health care. Conclusion The study shows high volumes in Swiss primary care and provides evidence that the volume of supply is not driven by medical needs alone. Effects related to the

  14. The Swiss approach to finding compromises in nuclear waste governance

    Energy Technology Data Exchange (ETDEWEB)

    Kuppler, Sophie; Grunwald, Armin [Karlsruhe Institute of Technology (Germany). Inst. for Technology Assessment and Systems Analysis

    2015-07-01

    In Switzerland, a new site selection procedure is being implemented since 2008. This procedure, which is laid down in a 'sectoral plan', shows strong elements of public participation and transparency and can be considered a step away from the classical 'decide-announce-defend' approach in decision-making. This procedure tends towards a more governance-oriented approach based on ideas of 'civility' of decision-making. Despite this renewal, the Swiss case clearly shows that any kind of selection process has to be considered as a 'working compromise', which needs to be adapted when new challenges emerge.

  15. Prenatal desvenlafaxine induced behavioural alterations in Swiss albino mice

    OpenAIRE

    Kumari, Amrita; Singh, Mandavi; Trigunayat, Anshuman; Mishra, Anand; Shrestha, Shamsher; Shrestha, Uttam

    2014-01-01

    Background Desvenlafaxine is used as an antidepressant and acts by inhibiting reuptake of serotonin and nor-adrenaline. Purpose The safety profile of desvenlafaxine has not yet been established during pregnancy, so we planned this study to see the behavioral changes in pups of mice who received desvenlafaxine during gestational period. Methods Swiss albino mice were used for the present study. The treated group was given desvenlafaxine orally in the dose of 80 mg/kg from 1st to 6th day of ges...

  16. Vector control of induction machines

    CERN Document Server

    Robyns, Benoit

    2012-01-01

    After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, ""Vector Control of Induction Machines"" introduces the standard mathematical models for induction machines - whichever rotor technology is used - as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. ""Vector Control of Induction Machines"" suggests a unique approach aimed at reducing parameter sensitivity for

  17. Beam Transfer and Machine Protection

    CERN Document Server

    Kain, V

    2016-01-01

    Beam transfer, such as injection into or extraction from an accelerator, is one of the most critical moments in terms of machine protection in a high-intensity machine. Special equipment is used and machine protection aspects have to be taken into account in the design of the beam transfer concepts. A brief introduction of the principles of beam transfer and the equipment involved will be given in this lecture. The main concepts of machine protection for injection and extraction will be presented, with examples from the CERN SPS and LHC.

  18. Turing Automata and Graph Machines

    Directory of Open Access Journals (Sweden)

    Miklós Bartha

    2010-06-01

    Full Text Available Indexed monoidal algebras are introduced as an equivalent structure for self-dual compact closed categories, and a coherence theorem is proved for the category of such algebras. Turing automata and Turing graph machines are defined by generalizing the classical Turing machine concept, so that the collection of such machines becomes an indexed monoidal algebra. On the analogy of the von Neumann data-flow computer architecture, Turing graph machines are proposed as potentially reversible low-level universal computational devices, and a truly reversible molecular size hardware model is presented as an example.

  19. The God Machine seeks the origin of the matter; La maquina de dios busca el origen de la materia

    Energy Technology Data Exchange (ETDEWEB)

    Martin, R.

    2015-07-01

    Under the green fields of the French-Swiss border, not far from the Alps and Lake Geneva, is hidden underground most strength Earth energy. The generated particles of low mass, subatomic, ue collide with each other in a huge circumference of 27 kilometers, the Large Hadron Collider (LHC English siglasen), an underground infrastructure that seeks to answer big questions of science: the origin of matter we know or dark matter and energy, which together occupy 95% of the universe and that we are not able to see or understand. They call it the 'god machine' and is the largest and most complex built in the world. (Author)

  20. Production Machine Shop Employment Competencies. Part Four: The Milling Machine.

    Science.gov (United States)

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the fourth of four topic areas: the milling machine. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

  1. Standardized Curriculum for Machine Tool Operation/Machine Shop.

    Science.gov (United States)

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

  2. Machine performance assessment and enhancement for a hexapod machine

    Energy Technology Data Exchange (ETDEWEB)

    Mou, J.I. [Arizona State Univ., Tempe, AZ (United States); King, C. [Sandia National Labs., Livermore, CA (United States). Integrated Manufacturing Systems Center

    1998-03-19

    The focus of this study is to develop a sensor fused process modeling and control methodology to model, assess, and then enhance the performance of a hexapod machine for precision product realization. Deterministic modeling technique was used to derive models for machine performance assessment and enhancement. Sensor fusion methodology was adopted to identify the parameters of the derived models. Empirical models and computational algorithms were also derived and implemented to model, assess, and then enhance the machine performance. The developed sensor fusion algorithms can be implemented on a PC-based open architecture controller to receive information from various sensors, assess the status of the process, determine the proper action, and deliver the command to actuators for task execution. This will enhance a hexapod machine`s capability to produce workpieces within the imposed dimensional tolerances.

  3. Theory and practice in machining systems

    CERN Document Server

    Ito, Yoshimi

    2017-01-01

    This book describes machining technology from a wider perspective by considering it within the machining space. Machining technology is one of the metal removal activities that occur at the machining point within the machining space. The machining space consists of structural configuration entities, e.g., the main spindle, the turret head and attachments such the chuck and mandrel, and also the form-generating movement of the machine tool itself. The book describes fundamental topics, including the form-generating movement of the machine tool and the important roles of the attachments, before moving on to consider the supply of raw materials into the machining space, and the discharge of swarf from it, and then machining technology itself. Building on the latest research findings “Theory and Practice in Machining System” discusses current challenges in machining. Thus, with the inclusion of introductory and advanced topics, the book can be used as a guide and survey of machining technology for students an...

  4. Semantic Vector Machines

    CERN Document Server

    Vincent, Etter

    2011-01-01

    We first present our work in machine translation, during which we used aligned sentences to train a neural network to embed n-grams of different languages into an $d$-dimensional space, such that n-grams that are the translation of each other are close with respect to some metric. Good n-grams to n-grams translation results were achieved, but full sentences translation is still problematic. We realized that learning semantics of sentences and documents was the key for solving a lot of natural language processing problems, and thus moved to the second part of our work: sentence compression. We introduce a flexible neural network architecture for learning embeddings of words and sentences that extract their semantics, propose an efficient implementation in the Torch framework and present embedding results comparable to the ones obtained with classical neural language models, while being more powerful.

  5. Regularized maximum correntropy machine

    KAUST Repository

    Wang, Jim Jing-Yan

    2015-02-12

    In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.

  6. Machine Learning Exciton Dynamics

    CERN Document Server

    Häse, Florian; Pyzer-Knapp, Edward; Aspuru-Guzik, Alán

    2015-01-01

    Obtaining the exciton dynamics of large photosynthetic complexes by using mixed quantum mechanics/molecular mechanics (QM/MM) is computationally demanding. We propose a machine learning technique, multi-layer perceptrons, as a tool to reduce the time required to compute excited state energies. With this approach we predict time-dependent density functional theory (TDDFT) excited state energies of bacteriochlorophylls in the Fenna-Matthews-Olson (FMO) complex. Additionally we compute spectral densities and exciton populations from the predictions. Different methods to determine multi-layer perceptron training sets are introduced, leading to several initial data selections. In addition, we compute spectral densities and exciton populations. Once multi-layer perceptrons are trained, predicting excited state energies was found to be significantly faster than the corresponding QM/MM calculations. We showed that multi-layer perceptrons can successfully reproduce the energies of QM/MM calculations to a high degree o...

  7. Training Restricted Boltzmann Machines

    DEFF Research Database (Denmark)

    Fischer, Asja

    Restricted Boltzmann machines (RBMs) are probabilistic graphical models that can also be interpreted as stochastic neural networks. Training RBMs is known to be challenging. Computing the likelihood of the model parameters or its gradient is in general computationally intensive. Thus, training...... relies on sampling based approximations of the log-likelihood gradient. I will present an empirical and theoretical analysis of the bias of these approximations and show that the approximation error can lead to a distortion of the learning process. The bias decreases with increasing mixing rate...... of the applied sampling procedure and I will introduce a transition operator that leads to faster mixing. Finally, a different parametrisation of RBMs will be discussed that leads to better learning results and more robustness against changes in the data representation....

  8. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  9. Acute exposure of apigenin induces hepatotoxicity in Swiss mice.

    Science.gov (United States)

    Singh, Prabhat; Mishra, Shrawan Kumar; Noel, Sanjeev; Sharma, Sharad; Rath, Srikanta Kumar

    2012-01-01

    Apigenin, a dietary flavonoid, is reported to have several therapeutic effects in different diseases including cancer. Toxicity of Apigenin is however, least explored, and reports are scanty in literature. This warrants dose-specific evaluation of toxicity in vivo. In the present study, Apigenin was administered intraperitoneally to Swiss mice at doses of 25, 50, 100 and 200 mg/kg. Serum levels of alanine amino transferase (ALT), aspartate amino transferase (AST) and alkaline phosphatase (ALP) were measured along with the examination of liver histology, reactive oxygen species (ROS) in blood, lipid peroxidation (LPO), glutathione level, superoxide dismutase activity, catalase activity, glutathione S-transferase activity and gene expression in liver tissue. Increase in ALT, AST, ALP, ROS, ratio of oxidized to reduced glutathione (GSSG/GSH) and LPO, altered enzyme activities along with damaged histoarchitecture in the liver of 100 or 200 mg/kg Apigenin treated animals were found. Microarray analysis revealed the differential expression of genes that correspond to different biologically relevant pathways including oxidative stress and apoptosis. In conclusion, these results suggested the oxidative stress induced liver damage which may be due to the regulation of multiple genes by Apigenin at higher doses in Swiss mice.

  10. Acute exposure of apigenin induces hepatotoxicity in Swiss mice.

    Directory of Open Access Journals (Sweden)

    Prabhat Singh

    Full Text Available Apigenin, a dietary flavonoid, is reported to have several therapeutic effects in different diseases including cancer. Toxicity of Apigenin is however, least explored, and reports are scanty in literature. This warrants dose-specific evaluation of toxicity in vivo. In the present study, Apigenin was administered intraperitoneally to Swiss mice at doses of 25, 50, 100 and 200 mg/kg. Serum levels of alanine amino transferase (ALT, aspartate amino transferase (AST and alkaline phosphatase (ALP were measured along with the examination of liver histology, reactive oxygen species (ROS in blood, lipid peroxidation (LPO, glutathione level, superoxide dismutase activity, catalase activity, glutathione S-transferase activity and gene expression in liver tissue. Increase in ALT, AST, ALP, ROS, ratio of oxidized to reduced glutathione (GSSG/GSH and LPO, altered enzyme activities along with damaged histoarchitecture in the liver of 100 or 200 mg/kg Apigenin treated animals were found. Microarray analysis revealed the differential expression of genes that correspond to different biologically relevant pathways including oxidative stress and apoptosis. In conclusion, these results suggested the oxidative stress induced liver damage which may be due to the regulation of multiple genes by Apigenin at higher doses in Swiss mice.

  11. Antidiarrheal Activity of Three Medicinal Plants in Swiss Albino Mice

    Directory of Open Access Journals (Sweden)

    MD. Ashrafuzzaman

    2016-09-01

    Full Text Available Background: Different parts of Allamanda neriifolia (AN, Crinum latifolium (CL, and Bruguiera cylindrical (BC are used in folk medicine to treat diarrhea. Therefore, the aim of this study was to investigate and compare possible antidiarrheal activity of methanol extracts from barks, stems, and roots of AL, CL, and BC in Swiss albino mice. Methods: Antidiarrheal activities of extracts were evaluated at three doses (100mg/kg, 200 mg/kg and 400mg/kg and compared with Loperamide in a castor oil-induced diarrhea and charcoal meal test model in the Swiss albino mice. Results: The aqueous extract of CL and BC administered at doses of 100, 200 and 400mg/kg showed 0%, 24.5%, 62.26% and 5.66%, 37.11%, and 62.26% diarrhea inhibition, respectively (Table 2. This reduction in diarrheal episodes is significant, and maximum effect was observed at the dose of 400mg/kg similarly in the alcohol extracts of both CL and BC. AN administered at the dose of 100, 200 and 400mg/kg showed 55.97%, 74.84% and 74.84% diarrhea inhibition, respectively. Conclusion: The antidiarrheal effect of the AN extract, in contrast to CL and BC, against the castor oil-induced diarrhea model prove its efficacy in an extensive range of diarrheal conditions.

  12. Histomorphometric effects of gemcitabine on Swiss albino mice spermatogenesis

    Directory of Open Access Journals (Sweden)

    S Viveka

    2015-01-01

    Full Text Available Background: Spermatogenesis is a highly conserved and regulated process and it is sensitive to fluctuations in the physical and chemical environment. Gemcitabine is a novel antimetabolic anticancer drug used frequently in the treatment of many cancers. This study aimed to investigate the histomorphometric effects of gemcitabine on spermatogenesis in Swiss albino mice. Materials and Methods: Gemcitabine in high and low doses (80 and 40 mg/kg injected intraperitoneally to inbred Swiss albino mice. Gross testicular features and seminiferous tubular histomorphometry was studies at the end of 7 th , 14 th day and at 2 months sperm shape abnormalities were studied. Results: Seminiferous tubular morphology was altered significantly, showing a reduction in height, perimeter and area in a dose dependent manner. Sertoli cell number decreased. Basement membrane thickness was reduced and it appeared to be permanent, with statistically insignificant changes even after 2 months. There was a reduction of intertubular spaces. Sperms have shown banana heading, decapitation and loss of normal hook of head. The effects were partially reversible at the end of 2 months. Conclusion: It was concluded that gemcitabine affects the process of spermatogenesis adversely in a dose and time dependent manner and the effects are partially reversible.

  13. Food Color Induced Hepatotoxicity in Swiss Albino Rats, Rattus norvegicus

    Science.gov (United States)

    Saxena, Beenam; Sharma, Shiv

    2015-01-01

    Objective: Certain dietary constituents can induce toxicity and play a critical role in the development of several hepatic disorders. Tartrazine, metanil yellow and sunset yellow are widely used azo dyes in food products, so the present study is aimed to investigate the food color induced hepatotoxicity in Swiss albino rats. Materials and Methods: Swiss albino rats were divided into four groups, each group having six animals. Group I served as control, Group II, Group III and Group IV were administered with 25, 50 and 75 mg/kg body weight blend of sunset yellow, metanil yellow and tartrazine for 30 days. Hepatotoxicity in rats treated with a blend of these food colors was studied by assessing parameters such as serum total protein, serum albumin, serum alkaline phosphatase (ALP) as well as hepatic malondialdehyde (MDA). The activity of superoxide dismutase (SOD), reduced glutathione (GSH) and catalase (CAT) were assessed. Results: Significantly increased concentrations of serum total protein, serum albumin, serum ALP and hepatic MDA and significantly lowered levels of SOD, reduced GSH and CAT in the liver tissue of treated animals were observed when compared with control animals. The alteration in the liver includes necrosis of hepatocytes, infiltration and vacuolation. Conclusion: The result indicates that consumption of food color in diet induces liver tissue damage. The used doses of food color were mostly attributable to hepatocellular damage and drastic alteration in antioxidant defense system. PMID:26862277

  14. Fiftieth anniversary celebrations get underway with a Swiss philatelic gift

    CERN Multimedia

    2004-01-01

    A special commemorative stamp dedicated to CERN will go on sale in post offices throughout Switzerland on 9 March, marking the official start of CERN's 50th anniversary celebrations. On your marks, get set...go! The first ten stamp-lovers born in 1954 to present themselves at the counter of CERN's Meyrin post office at 9.00 a.m. on Tuesday 9 March will receive the new Swiss commemorative stamp issued in honour of CERN, together with a surprise gift. Designed by Swiss artists Christian Stuker and Beat Trummer, the stamp aims to convey the spirit of CERN in an area no larger than 28 mm by 33 mm. 'We wanted to get away from existing CERN imagery and create something symbolic for this 50th anniversary,' Christian Stucker explains. The radiating design portrays an opening, a spreading-out 'towards infinity', which reflects CERN's fundamental goals of research and the transmission of knowledge. The stamp will be available from 9 March onwards in all post offices across Switzerland as well as in the philatelic cen...

  15. CREDITWORTHINESS OF MACHINE BUILDING ENTERPRISES

    OpenAIRE

    Freimanis, Tālis; Svarinskis, Leonārs

    2009-01-01

    The previous research showed that the Latvian machine building enterprises experienced regular liquidity problems at the end of each year. Therefore to ensure their development the constant access to bank credits is a necessity. For that reason the analysis and evaluation of machine building enterprises creditworthiness was performed.

  16. SOLVENCY OF MACHINE BUILDING ENTERPRISES

    OpenAIRE

    Freimanis, Tālis; Svarinskis, Leonārs

    2009-01-01

    Machine building as a competative exporting industry plays an important role in the Latvian national open market economy. The further development of machine building is possible under the conditions of the stable solvency. Therefore, it is crucial to perform the solvency analysis of the industry enterprises and give its evaluation.

  17. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are

  18. Understanding and applying machine vision

    CERN Document Server

    Zeuch, Nello

    2000-01-01

    A discussion of applications of machine vision technology in the semiconductor, electronic, automotive, wood, food, pharmaceutical, printing, and container industries. It describes systems that enable projects to move forward swiftly and efficiently, and focuses on the nuances of the engineering and system integration of machine vision technology.

  19. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are th

  20. Cleaning of Free Machining Brass

    Energy Technology Data Exchange (ETDEWEB)

    Shen, T

    2005-12-29

    We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.

  1. Man and Machines: Three Criticisms.

    Science.gov (United States)

    Schneider, Edward F.

    As machines have become a more common part of daily life through the passage of time, the idea that the line separating man and machine is slowly fading has become more popular as well. This paper examines three critics of change through their most famous works. One of the most popular views of Mary Shelley's "Frankenstein" is that it is a…

  2. Anaesthesia machine: Checklist, hazards, scavenging

    Directory of Open Access Journals (Sweden)

    Umesh Goneppanavar

    2013-01-01

    Full Text Available From a simple pneumatic device of the early 20 th century, the anaesthesia machine has evolved to incorporate various mechanical, electrical and electronic components to be more appropriately called anaesthesia workstation. Modern machines have overcome many drawbacks associated with the older machines. However, addition of several mechanical, electronic and electric components has contributed to recurrence of some of the older problems such as leak or obstruction attributable to newer gadgets and development of newer problems. No single checklist can satisfactorily test the integrity and safety of all existing anaesthesia machines due to their complex nature as well as variations in design among manufacturers. Human factors have contributed to greater complications than machine faults. Therefore, better understanding of the basics of anaesthesia machine and checking each component of the machine for proper functioning prior to use is essential to minimise these hazards. Clear documentation of regular and appropriate servicing of the anaesthesia machine, its components and their satisfactory functioning following servicing and repair is also equally important. Trace anaesthetic gases polluting the theatre atmosphere can have several adverse effects on the health of theatre personnel. Therefore, safe disposal of these gases away from the workplace with efficiently functioning scavenging system is necessary. Other ways of minimising atmospheric pollution such as gas delivery equipment with negligible leaks, low flow anaesthesia, minimal leak around the airway equipment (facemask, tracheal tube, laryngeal mask airway, etc. more than 15 air changes/hour and total intravenous anaesthesia should also be considered.

  3. A multipurpose tissue bending machine.

    Science.gov (United States)

    Vesely, I; Boughner, D R

    1985-01-01

    A unique tissue bending machine was developed to test the bending properties of normal and bioprosthetic heart valve material. It can be operated in air or in a tissue bath and can measure bending torques with an accuracy in excess of 1.0 microN m. Three contrasting substances were tested to compare their stiffness and to demonstrate the machine.

  4. Self-Adjusting Teaching Machines.

    Science.gov (United States)

    Dovgyallo, A. M.

    A study was made on the synthesis of teaching machine elements to ensure the stabilization of the chi indicator of the teaching process of each student. At first, a procedure was developed for calculating the chi indicator for the case when the teaching machine predicts the magnitude of this indicator based on probabilities derived from an…

  5. The Machine Scoring of Writing

    Science.gov (United States)

    McCurry, Doug

    2010-01-01

    This article provides an introduction to the kind of computer software that is used to score student writing in some high stakes testing programs, and that is being promoted as a teaching and learning tool to schools. It sketches the state of play with machines for the scoring of writing, and describes how these machines work and what they do.…

  6. Real Analytic Machines and Degrees

    CERN Document Server

    Gärtner, Tobias; 10.4204/EPTCS.24.12

    2010-01-01

    We study and compare in two degree-theoretic ways (iterated Halting oracles analogous to Kleene's arithmetical hierarchy and the Borel hierarchy of descriptive set theory) the capabilities and limitations of three models of analytic computation: BSS machines (aka real-RAM) and strongly/weakly analytic machines as introduced by Hotz et. al. (1995).

  7. Storytelling machines for video search

    NARCIS (Netherlands)

    Habibian, A.

    2016-01-01

    We study a fundamental question for developing storytelling machines: what vocabulary is suited for machines to tell the story of a video? We start by manually specifying the vocabulary concepts and their annotations. In order to effectively handcraft the vocabulary, we empirically study what are th

  8. Anaesthesia machine: checklist, hazards, scavenging.

    Science.gov (United States)

    Goneppanavar, Umesh; Prabhu, Manjunath

    2013-09-01

    From a simple pneumatic device of the early 20(th) century, the anaesthesia machine has evolved to incorporate various mechanical, electrical and electronic components to be more appropriately called anaesthesia workstation. Modern machines have overcome many drawbacks associated with the older machines. However, addition of several mechanical, electronic and electric components has contributed to recurrence of some of the older problems such as leak or obstruction attributable to newer gadgets and development of newer problems. No single checklist can satisfactorily test the integrity and safety of all existing anaesthesia machines due to their complex nature as well as variations in design among manufacturers. Human factors have contributed to greater complications than machine faults. Therefore, better understanding of the basics of anaesthesia machine and checking each component of the machine for proper functioning prior to use is essential to minimise these hazards. Clear documentation of regular and appropriate servicing of the anaesthesia machine, its components and their satisfactory functioning following servicing and repair is also equally important. Trace anaesthetic gases polluting the theatre atmosphere can have several adverse effects on the health of theatre personnel. Therefore, safe disposal of these gases away from the workplace with efficiently functioning scavenging system is necessary. Other ways of minimising atmospheric pollution such as gas delivery equipment with negligible leaks, low flow anaesthesia, minimal leak around the airway equipment (facemask, tracheal tube, laryngeal mask airway, etc.) more than 15 air changes/hour and total intravenous anaesthesia should also be considered.

  9. Bionic machines and systems

    Energy Technology Data Exchange (ETDEWEB)

    Halme, A.; Paanajaervi, J. (eds.)

    2004-07-01

    Introduction Biological systems form a versatile and complex entirety on our planet. One evolutionary branch of primates, called humans, has created an extraordinary skill, called technology, by the aid of which it nowadays dominate life on the planet. Humans use technology for producing and harvesting food, healthcare and reproduction, increasing their capability to commute and communicate, defending their territory etc., and to develop more technology. As a result of this, humans have become much technology dependent, so that they have been forced to form a specialized class of humans, called engineers, who take care of the knowledge of technology developing it further and transferring it to later generations. Until now, technology has been relatively independent from biology, although some of its branches, e.g. biotechnology and biomedical engineering, have traditionally been in close contact with it. There exist, however, an increasing interest to expand the interface between technology and biology either by directly utilizing biological processes or materials by combining them with 'dead' technology, or by mimicking in technological solutions the biological innovations created by evolution. The latter theme is in focus of this report, which has been written as the proceeding of the post-graduate seminar 'Bionic Machines and Systems' held at HUT Automation Technology Laboratory in autumn 2003. The underlaying idea of the seminar was to analyze biological species by considering them as 'robotic machines' having various functional subsystems, such as for energy, motion and motion control, perception, navigation, mapping and localization. We were also interested about intelligent capabilities, such as learning and communication, and social structures like swarming behavior and its mechanisms. The word 'bionic machine' comes from the book which was among the initial material when starting our mission to the fascinating world

  10. Machinability of Stellite 6 hardfacing

    Science.gov (United States)

    Benghersallah, M.; Boulanouar, L.; Le Coz, G.; Devillez, A.; Dudzinski, D.

    2010-06-01

    This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  11. Machine intelligence and signal processing

    CERN Document Server

    Vatsa, Mayank; Majumdar, Angshul; Kumar, Ajay

    2016-01-01

    This book comprises chapters on key problems in machine learning and signal processing arenas. The contents of the book are a result of a 2014 Workshop on Machine Intelligence and Signal Processing held at the Indraprastha Institute of Information Technology. Traditionally, signal processing and machine learning were considered to be separate areas of research. However in recent times the two communities are getting closer. In a very abstract fashion, signal processing is the study of operator design. The contributions of signal processing had been to device operators for restoration, compression, etc. Applied Mathematicians were more interested in operator analysis. Nowadays signal processing research is gravitating towards operator learning – instead of designing operators based on heuristics (for example wavelets), the trend is to learn these operators (for example dictionary learning). And thus, the gap between signal processing and machine learning is fast converging. The 2014 Workshop on Machine Intel...

  12. Machinability of Stellite 6 hardfacing

    Directory of Open Access Journals (Sweden)

    Dudzinski D.

    2010-06-01

    Full Text Available This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  13. Nontraditional machining processes research advances

    CERN Document Server

    2013-01-01

    Nontraditional machining employs processes that remove material by various methods involving thermal, electrical, chemical and mechanical energy or even combinations of these. Nontraditional Machining Processes covers recent research and development in techniques and processes which focus on achieving high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods. With applications to the automotive, aircraft and mould and die industries, Nontraditional Machining Processes explores different aspects and processes through dedicated chapters. The seven chapters explore recent research into a range of topics including laser assisted manufacturing, abrasive water jet milling and hybrid processes. Students and researchers will find the practical examples and new processes useful for both reference and for developing further processes. Industry professionals and materials engineers will also find Nontraditional M...

  14. An art history of machines?

    Directory of Open Access Journals (Sweden)

    Daniel Bridgman

    2016-12-01

    Full Text Available A toast offered in honor of Donald Preziosi on the cusp of his seventy-fifth birthday, this essay considers a range of machine metaphors, their art historical settings, and their implications. Addressing the mythography of Daedalus and his wonder machines in relation to art history’s machinic enterprises, an ancient art-archaeology seminar Preziosi directed at UCLA (in 1988 and the book, Rethinking Art History: Meditations on a Coy Science (1989 form the focus of my thinking about Preziosi’s work. At issue across the essay is the work of recursion, when machines make machines and in so doing create a recessive subjectivity for the maker. The essay ends with the speculation that art history’s disciplinary machinery may owe its generative strength to a perpetual need for replacement parts.

  15. [Between law and psychiatry: homosexuality in the project of the Swiss penal code (1918)].

    Science.gov (United States)

    Delessert, Thierry

    2005-01-01

    In 1942 the Swiss penal code depenalises homosexual acts between agreeing adults under some conditions. The genesis of the penal article shows that it was constructed before the First World War and bears marks of the forensic theories of the turn of the century. Both by direct contacts and the authority of its eminent figures, Swiss psychiatry exerts an unquestionable influence on the depenalisation. The conceptualisation of homosexuality is also strongly influenced by the German psychiatric theories and discussed in reference to Germanic law. By the penal article, the Swiss lawyers and psychiatrists link the homosexual question with the determination of the irresponsibility of criminal mental patients and degeneracy.

  16. Microelectrical Discharge Machining: A Suitable Process for Machining Ceramics

    Directory of Open Access Journals (Sweden)

    Andreas Schubert

    2015-01-01

    Full Text Available Today ceramics are used in many industrial applications, for example, in the biomedical field, for high-temperature components or for cutting tools. This is attributed to their excellent mechanical and physical properties, as low density, high strength, and hardness or chemical resistance. However, these specific mechanical properties lead to problems regarding the postprocessing of ceramics. In particular, cutting processes require expensive tools which cause high manufacturing costs to machine ceramics. Consequently, there is a demand for alternative machining processes. Microelectrical discharge machining (micro-EDM is a thermal abrasion process which is based on electrical discharges between a tool and a workpiece. The advantages of micro-EDM are more and more in focus for ceramic machining. These advantages include the process of being a noncontact technology, an independency of material brittleness and hardness, a low impact on the material, and the achievable microstructures. This paper presents the current state of investigations regarding micro-EDM of ceramics. Beside the process principle of EDM, the used procedures for machining ceramics and insulating ceramics are described. Furthermore several machining examples are presented to demonstrate the possibilities of the micro-EDM process with regard to the machining of ceramics.

  17. Disparities in bone density measurement history and osteoporosis medication utilisation in Swiss women: results from the Swiss Health Survey 2007

    Directory of Open Access Journals (Sweden)

    Born Rita

    2013-01-01

    Full Text Available Abstract Background Although factors associated with the utilisation of bone density measurement (BDM and osteoporosis treatment have been regularly assessed in the US and Canada, they have not been effectively analysed in European countries. This study assessed factors associated with the utilisation of BDM and osteoporosis medication (OM in Switzerland. Methods The Swiss Health Survey 2007 data included self-reported information on BDM and OM for women aged 40 years and older who were living in private households. Multivariable logistic regression analysis was used to identify sociodemographic, socioeconomic, healthcare-related and osteoporosis risk factors associated with BDM and OM utilisation. Results The lifetime prevalence of BDM was 25.6% (95% CI: 24.3-26.9% for women aged 40 years and older. BDM utilisation was associated with most sociodemographic factors, all the socioeconomic and healthcare-related factors, and with major osteoporosis risk factors analysed. The prevalence of current OM was 7.8% (95% CI: 7.0-8.6% and it was associated with some sociodemographic and most healthcare-related factors but only with one socioeconomic factor. Conclusions In Swiss women, ever having had a BDM and current OM were low and utilisation disparities exist according to sociodemographic, socioeconomic and healthcare-related factors. This might foster further health inequalities. The reasons for these findings should be addressed in further studies of the elderly women, including those living in institutions.

  18. Decomposition of forging dies for machining planning

    CERN Document Server

    Tapie, Laurent; Anselmetti, Bernard

    2009-01-01

    This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outstanding process planning.

  19. Decomposition of forging dies for machining planning

    OpenAIRE

    Tapie, Laurent; Mawussi, Kwamiwi; Anselmetti, Bernard

    2009-01-01

    International audience; This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outs...

  20. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    Energy Technology Data Exchange (ETDEWEB)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  1. Machine Learning for Medical Imaging.

    Science.gov (United States)

    Erickson, Bradley J; Korfiatis, Panagiotis; Akkus, Zeynettin; Kline, Timothy L

    2017-01-01

    Machine learning is a technique for recognizing patterns that can be applied to medical images. Although it is a powerful tool that can help in rendering medical diagnoses, it can be misapplied. Machine learning typically begins with the machine learning algorithm system computing the image features that are believed to be of importance in making the prediction or diagnosis of interest. The machine learning algorithm system then identifies the best combination of these image features for classifying the image or computing some metric for the given image region. There are several methods that can be used, each with different strengths and weaknesses. There are open-source versions of most of these machine learning methods that make them easy to try and apply to images. Several metrics for measuring the performance of an algorithm exist; however, one must be aware of the possible associated pitfalls that can result in misleading metrics. More recently, deep learning has started to be used; this method has the benefit that it does not require image feature identification and calculation as a first step; rather, features are identified as part of the learning process. Machine learning has been used in medical imaging and will have a greater influence in the future. Those working in medical imaging must be aware of how machine learning works. (©)RSNA, 2017.

  2. Landscape History of Grosses Moos, NW Swiss Alpine Foreland.

    Science.gov (United States)

    Joanna Heer, Aleksandra; Adamiec, Grzegorz; Veit, Heinz; May, Jan-Hendrik; Novenko, Elena; Hajdas, Irka

    2017-04-01

    The western Swiss Plateau with Lake Neuchâtel is part of the alpine foreland and among the key areas for the reconstruction of environmental changes since the last postglacial. This study was carried out in a landscape located NE of the lake and called Grosses Moos (The Large Fen) - currently designated the Swiss largest, continuous farming area, after the fen was drained in course of landscape engineering projects performed in Switzerland at the end of the 19th century. The study contributes new results from nine excavations of littoral ridges identified in Grosses Moos, and integrates sedimentology, paleo-environmental analysis and three independent chronological methods. Radiocarbon dating, pollen analysis and optically stimulated luminescence (OSL) were applied to the sediments. While pollen and radiocarbon follow the standard procedures, the evaluation of the luminescence age estimates demanded adjustment according to the physical and microdosimetric properties of the alpine quartz, and consideration of the peculiarities of the changing littoral environments of Grosses Moos. The Grosses Moos landscape developed on the temporary surface of the post-Last Glacial sedimentary infill of the over-deepened glacial Aare valley. In this study the landscape history has been fitted into the existing supraregional time scales of NGRIP, the Swiss bio-zones system and the human history based on archaeological and historic records and covers a time span of up to 15'000 yr b2k. The wide-ranging suite of geomorphic features and sedimentary sequences, including littoral lake sediments, beach ridges, dunes, palaeo-channels, peat and colluvial deposits, enable the extensive reconstruction of spatially and temporally variable natural shaping processes. In addition, our results indicate remobilization of soil, colluvium, and sediment due to human settlement activities since the Neolithic - with an important increase in sediment load and spatial variability since the Bronze Age

  3. Grid Data Management and Customer Demands at MeteoSwiss

    Science.gov (United States)

    Rigo, G.; Lukasczyk, Ch.

    2010-09-01

    Data grids constitute the required input form for a variety of applications. Therefore, customers increasingly expect climate services to not only provide measured data, but also grids of these with the required configurations on an operational basis. Currently, MeteoSwiss is establishing a production chain for delivering data grids by subscription directly from the data warehouse in order to meet the demand for precipitation data grids by governmental, business and science customers. The MeteoSwiss data warehouse runs on an Oracle database linked with an ArcGIS Standard edition geodatabase. The grids are produced by Unix-based software written in R called GRIDMCH which extracts the station data from the data warehouse and stores the files in the file system. By scripts, the netcdf-v4 files are imported via an FME interface into the database. Currently daily and monthly deliveries of daily precipitation grids are available from MeteoSwiss with a spatial resolution of 2.2km x 2.2km. These daily delivered grids are a preliminary based on 100 measuring sites whilst the grid of the monthly delivery of daily sums is calculated out of about 430 stations. Crucial for the absorption by the customers is the understanding of and the trust into the new grid product. Clearly stating needs which can be covered by grid products, the customers require a certain lead time to develop applications making use of the particular grid. Therefore, early contacts and a continuous attendance as well as flexibility in adjusting the production process to fulfill emerging customer needs are important during the introduction period. Gridding over complex terrain can lead to temporally elevated uncertainties in certain areas depending on the weather situation and coverage of measurements. Therefore, careful instructions on the quality and use and the possibility to communicate the uncertainties of gridded data proofed to be essential especially to the business and science customers who require

  4. Behavioral assessment of NIH Swiss mice acutely intoxicated with tetramethylenedisulfotetramine.

    Science.gov (United States)

    Flannery, Brenna M; Silverman, Jill L; Bruun, Donald A; Puhger, Kyle R; McCoy, Mark R; Hammock, Bruce D; Crawley, Jacqueline N; Lein, Pamela J

    2015-01-01

    Tetramethylenedisulfotetramine (TETS) is a potent convulsant poison that is thought to trigger seizures by inhibiting the function of the type A gamma-aminobutyric acid receptor (GABAAR). Acute intoxication with TETS can cause vomiting, convulsions, status epilepticus (SE) and even death. Clinical case reports indicate that individuals who survive poisoning may exhibit long-term neuropsychological issues and cognitive deficits. Therefore, the objective of this research was to determine whether a recently described mouse model of acute TETS intoxication exhibits persistent behavioral deficits. Young adult male NIH Swiss mice received a seizure-inducing dose of TETS (0.15mg/kg, ip) and then were rescued from lethality by administration of diazepam (5mg/kg, ip) approximately 20min post-TETS-exposure. TETS-intoxicated mice typically exhibited 2 clonic seizures prior to administration of diazepam with no subsequent seizures post-diazepam injection as assessed using behavioral criteria. Seizures lasted an average of 72s. Locomotor activity, anxiety-like and depression-relevant behaviors and cognition were assessed at 1week, 1month and 2months post-TETS exposure using open field, elevated-plus maze, light↔dark transitions, tail suspension, forced swim and novel object recognition tasks. Interestingly, preliminary validation tests indicated that NIH Swiss mice do not respond to the shock in fear conditioning tasks. Subsequent evaluation of hot plate and tail flick nociception tasks revealed that this strain exhibits significantly decreased pain sensitivity relative to age- and sex-matched C57BL/6J mice, which displayed normal contextual fear conditioning. NIH Swiss mice acutely intoxicated with TETS exhibited no significant anxiety-related, depression-relevant, learning or memory deficits relative to vehicle controls at any of the time points assessed with the exception of significantly increased locomotor activity at 2months post-TETS intoxication. The general absence

  5. Learning with Support Vector Machines

    CERN Document Server

    Campbell, Colin

    2010-01-01

    Support Vectors Machines have become a well established tool within machine learning. They work well in practice and have now been used across a wide range of applications from recognizing hand-written digits, to face identification, text categorisation, bioinformatics, and database marketing. In this book we give an introductory overview of this subject. We start with a simple Support Vector Machine for performing binary classification before considering multi-class classification and learning in the presence of noise. We show that this framework can be extended to many other scenarios such a

  6. Gloved Human-Machine Interface

    Science.gov (United States)

    Adams, Richard (Inventor); Olowin, Aaron (Inventor); Hannaford, Blake (Inventor)

    2015-01-01

    Certain exemplary embodiments can provide a system, machine, device, manufacture, circuit, composition of matter, and/or user interface adapted for and/or resulting from, and/or a method and/or machine-readable medium comprising machine-implementable instructions for, activities that can comprise and/or relate to: tracking movement of a gloved hand of a human; interpreting a gloved finger movement of the human; and/or in response to interpreting the gloved finger movement, providing feedback to the human.

  7. Machine learning in virtual screening.

    Science.gov (United States)

    Melville, James L; Burke, Edmund K; Hirst, Jonathan D

    2009-05-01

    In this review, we highlight recent applications of machine learning to virtual screening, focusing on the use of supervised techniques to train statistical learning algorithms to prioritize databases of molecules as active against a particular protein target. Both ligand-based similarity searching and structure-based docking have benefited from machine learning algorithms, including naïve Bayesian classifiers, support vector machines, neural networks, and decision trees, as well as more traditional regression techniques. Effective application of these methodologies requires an appreciation of data preparation, validation, optimization, and search methodologies, and we also survey developments in these areas.

  8. Fundamentals of Machine Learning for Neural Machine Translation

    OpenAIRE

    Kelleher, John

    2016-01-01

    This paper presents a short introduction to neural networks and how they are used for machine translation and concludes with some discussion on the current research challenges being addressed by neural machine translation (NMT) research. The primary goal of this paper is to give a no-tears introduction to NMT to readers that do not have a computer science or mathematical background. The secondary goal is to provide the reader with a deep enough understanding of NMT that they can appreciate th...

  9. The Swiss Black Swan Bad Scenario: Is Switzerland Another Casualty of the Eurozone Crisis?

    Directory of Open Access Journals (Sweden)

    Sebastien Lleo

    2015-08-01

    Full Text Available Financial disasters to hedge funds, bank trading departments and individual speculative traders and investors seem to always occur because of non-diversification in all possible scenarios, being overbet and being hit by a bad scenario. Black swans are the worst type of bad scenario: unexpected and extreme. The Swiss National Bank decision on 15 January 2015 to abandon the 1.20 peg against the Euro was a tremendous blow for many Swiss exporters, but also Swiss and international investors, hedge funds, global macro funds, banks, as well as the Swiss central bank. In this paper, we discuss the causes for this action, the money losers and the few winners, what it means for Switzerland, Europe and the rest of the world, what kinds of trades were lost and how they have been prevented.

  10. Costs and Benefits of Dual Apprenticeship: Lessons from the Swiss System.

    Science.gov (United States)

    Hanhard, Siegfried; Bossio, Sandra

    1998-01-01

    After compulsory schooling, nearly two-thirds of Swiss youth undertake apprenticeships. Although it has been an efficient and effective system, young people are losing interest and businesses are questioning the time and costs involved in changing economic conditions. (SK)

  11. 77 FR 53248 - Culturally Significant Objects Imported for Exhibition Determinations: “Swiss Treasures: From...

    Science.gov (United States)

    2012-08-31

    ... Papyrus and Parchment to Erasmus, Zwingli, Calvin, and Barth'' SUMMARY: Notice is hereby given of the... exhibition ``Swiss Treasures: From Biblical Papyrus and Parchment to Erasmus, Zwingli, Calvin, and...

  12. Annual Report 1998 concerning the nuclear safety and radiological protection in the Swiss nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The report presents detailed information about the nuclear safety and radiological protection in the Swiss nuclear power plants, the central interim storage at Wuerenlingen, the Paul Scherrer Institute (PSI) and other nuclear installations in Switzerland.

  13. Survey of Swiss nuclear's cost study 2016; Pruefung der Kostenstudie 2016 von swissnuclear

    Energy Technology Data Exchange (ETDEWEB)

    Alt, Stefan; Ustohalova, Veronika [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie, Freiburg im Breisgau (Germany)

    2017-04-26

    The report discusses the Swiss nuclear cost study 2016 concerning the following issues: evaluation of the aspects of the cost study: cost structure, cost classification and risk provision, additional payment liability, option of lifetime extension for Swiss nuclear power plants; specific indications on the report ''cost study 2016 (KS16) - estimation of the decommissioning cost of Swiss nuclear power plants'': decommissioning costs in Germany, France and the USA, indexing the Swiss cost estimation for decommissioning cost, impact factors on the decommissioning costs; specific indications on the report ''cost study 2016 (KS16) - estimation of the disposal cost - interim storage, transport, containers and reprocessing''; specific indications on the report ''cost studies (KS16) - estimation of disposal costs - geological deep disposal'': time scale and costs incurred, political/social risks, retrievability, comparison with other mining costs.

  14. Annual report 1996 concerning the nuclear safety and radiological protection in the Swiss nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The report presents detailed information about the nuclear safety and radiological protection in the Swiss nuclear power plants, the central interim storage at Wuerenlingen, the Paul Scherrer Institute (PSI) and other nuclear installations in Switzerland. figs., tabs., refs.

  15. Can a fake fir tell the truth about Swiss needle cast? (paper)

    Science.gov (United States)

    A key question in dendrochronology to reconstruct forest disturbance history is how to distinguish between the effects of Swiss needle cast (SNC) and other forest disturbance agents (e.g., Arceuthobium spp., Armillaria, Phaseolus schweinitzii, Dendroctonus ponderosae, Dendroctonu...

  16. Annual Report 1999 concerning the nuclear safety and radiological protection in the Swiss nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-15

    The report presents detailed information about the nuclear safety and radiological protection in the Swiss nuclear power plants, the central interim storage at Wuerenlingen, the Paul Scherrer Institute (PSI) and other nuclear installations in Switzerland.

  17. Can a fake fir tell the truth about Swiss needle cast? (paper)

    Science.gov (United States)

    A key question in dendrochronology to reconstruct forest disturbance history is how to distinguish between the effects of Swiss needle cast (SNC) and other forest disturbance agents (e.g., Arceuthobium spp., Armillaria, Phaseolus schweinitzii, Dendroctonus ponderosae, Dendroctonu...

  18. Kalam's visit to cement Indo-Swiss ties in high tech area

    CERN Multimedia

    Sumir, Paul

    2005-01-01

    Seeking to boost Indo-Swiss cooperation in high tech areas, President APJ Abdul Kalam arrived in Geneva on a four-day visit to Switzerland aimed at firming up plans for future cooperation with the CERN

  19. Mental Preparation and Evaluation: A Sportpsychological Project with the Swiss Orienteering National Team.

    Science.gov (United States)

    Venzl, Reto

    1994-01-01

    Lists the training themes and levels of intervention of a psychological orienteering project for Swiss athletes. Presents an outline for preparation and evaluation of team or individual performance over time on technical, physical, mental, and environmental aspects of orienteering. (SV)

  20. Asian Martial Art Exhibitions at the Swiss Castle of Morges

    Directory of Open Access Journals (Sweden)

    Nicolae Gothard Bialokur

    2012-07-01

    Full Text Available This article reports on two unique cultural exhibitions (2005 and 2007 held in Morges, Switzerland. The main theme for these exhibitions was Asian martial arts with a focus on those from Japan, including presentations by notable masters in aikido, karate, judo, kyudo, iaido, kenjutsu, jodo, juttejutsu, kusarigamajutsu, naginatajutsu, tameshigiri, and kendo. On exhibit were artifacts from Morges Castle museum collections as well as numerous ancient objects borrowed specifically for these exhibitions from other Swiss museums and private collections. There was also a lecture on Japanese sword collecting and care, and presentations of Japanese dance, flower arranging (ikebana, the art of tea (châ no yu, châdo, paper folding (origami, traditional kimono dress, and detailed demonstrations on the manufacture of bladed weapons. Text and photography were arranged to record these events for this article, showing how excellent organization and cooperation can introduce high-quality martial traditions to the public.

  1. 渐变五行K·SWISS Verstad SPT Ⅱ

    Institute of Scientific and Technical Information of China (English)

    李磊

    2008-01-01

    1966年,一对热爱网球运动的瑞士兄弟宝纳(Art Brunner)和艾奈斯宾纳(Eamest Brunner)创立了K·SWISS品牌。凭着满腔热诚,他们造出了席卷全球的全皮网球鞋——K·SWISS经典鞋(K·SWISS Classic),鞋身上优美经典的五行间设计在面世后立即引起轰动。鞋品的选科、设计、功能一丝不苟,充分表现优雅舒适的典范。形象高雅大方,易于迎合衣着配饰,一直深受高贵典雅的时尚一族的青睐。

  2. The Szekeres Swiss Cheese model and the CMB observations

    CERN Document Server

    Bolejko, Krzysztof

    2008-01-01

    This paper presents the application of the Szekeres Swiss Cheese model to observations of the cosmic microwave background (CMB) radiation. It aims to study the CMB temperature fluctuations by the means of the exact inhomogeneous Szekeres model. So far the impact of inhomogeneous matter distribution on the CMB observations has been almost exclusively studied within the linear perturbations of the Friedmann model. However, since the density contrast of cosmic structures is larger than 1 this issue is worth studying using another approach. The Szekeres model is an inhomogeneous, non-symmetrical and exact solution of the Einstein equations. In this model, light propagation and matter evolution can be exactly calculated, without approximations such as small amplitude of the density contrast. This will allow us to examine the impact of light propagation effects on the CMB temperature fluctuations. The results of such analysis show that small-scale, non-linear inhomogeneities introduce - via light propagation effect...

  3. Generalized Swiss-Cheese Cosmologies II: Spherical Dust

    CERN Document Server

    Grenon, Cédric

    2011-01-01

    The generalized Swiss - cheese model, consisting of a Lema\\^itre - Tolman (inhomogeneous dust) region matched, by way of a comoving boundary surface, onto a Robertson-Walker background of homogeneous dust, has become a standard construction in modern cosmology. Here we ask if this construction can be made more realistic by introducing some evolution of the boundary surface. The answer we find is no. To maintain a boundary surface using the Darmois - Israel junction conditions, as opposed to the introduction of a surface layer, the boundary must remain exactly comoving. The options are to drop the assumption of dust or allow the development of surface layers. Either option fundamentally changes the original construction.

  4. Generalized Swiss-cheese cosmologies. II. Spherical dust

    Science.gov (United States)

    Grenon, Cédric; Lake, Kayll

    2011-10-01

    The generalized Swiss-cheese model, consisting of a Lemaître-Tolman (inhomogeneous dust) region matched, by way of a comoving boundary surface, onto a Robertson-Walker background of homogeneous dust, has become a standard construction in modern cosmology. Here, we ask if this construction can be made more realistic by introducing some evolution of the boundary surface. The answer we find is no. To maintain a boundary surface using the Darmois-Israel junction conditions, as opposed to the introduction of a surface layer, the boundary must remain exactly comoving. The options are to drop the assumption of dust or allow the development of surface layers. Either option fundamentally changes the original construction.

  5. Antecedents and Covariates of Alcohol Consumption among Swiss Male Conscripts

    Directory of Open Access Journals (Sweden)

    Stefan Vetter

    2009-03-01

    Full Text Available This study aimed to investigate prevalence and correlates of alcohol consumption frequency in a sample of Swiss conscripts (n=25,611 in order to identify factors that predispose for frequent consumption. A self-report of drinking frequencies, as well as socio-demographic and psychosocial variables, was collected at psychiatric baseline screening. Based on univariate analyses, relevant variables were included in a multivariate multinomial logistic regression model. Six percent were abstainers, 15% reported rarely drinking, 53% occasional drinking, 24% regular drinking and 2% daily drinking. Except for substance use, most associations followed a “J”-shaped curve across the categories of alcohol frequency. Abstinence and frequent drinking can be perceived as deviations from the social norm. Both behaviors are associated with more psychosocial stressors and might be therefore special targets for further studies and new prevention programs.

  6. Visit of the President of the Swiss Confederation

    CERN Multimedia

    Anaïs Schaeffer

    2016-01-01

    On 24 March, CERN welcomed Johann Schneider-Ammann, President of the Swiss Confederation.   President Johann Schneider-Ammann arrived to CERN in the morning, where he was welcomed by CERN Director-General Fabiola Gianotti. During the visit, the President was accompanied by Erik Reumann, spokesperson of the Federal Department of Economic Affairs, Education and Research, Alexandre Fasel, Ambassador and Permanent Representative of Switzerland to the United Nations Office and other international organisations in Geneva, and Patrick Pardo, counsellor at the permanent Mission of Switzerland to the United Nations Office and other international organizations in Geneva. In the Main Building he exchanged a few words with Frédérick Bordry, Director for Accelerators and Technology, Martin Steinacher, Director for Finance and Human Resources, and Friedemann Eder, Head of CERN Host States relations service. President Johann Schneider-Ammann also signed the guestbook of the Organ...

  7. Performance of the SwissQuantum network over 21 months

    Science.gov (United States)

    Stucki, Damien; Legré, Matthieu; Monat, Laurent; Robyr, Samuel; Trinkler, Patrick; Ribordy, Grégoire; Thew, Rob; Walenta, Nino; Gisin, Nicolas; Buntschu, François; Perroud, Didier; Litzistorf, Gerald; Tavares, Jose; Ventura, Stefano; Junod, Pascal; Voirol, Raphael; Monbaron, Patrick

    2011-11-01

    In this paper, we present the architecture and results of the SwissQuantum quantum key distribution (QKD) network. This three nodes triangular quantum network was running from March 2009 to January 2011 in the Geneva metropolitan area. The three trusted nodes were located at the University of Geneva (Unige), the CERN and the University of Applied Sciences Western Switzerland in Geneva (hepia Geneva). This quantum network was deployed to prove reliability of QKD in telecommunication network over a long period. To facilitate integration of QKD in telecommunication network, this quantum network was composed of three layers: a quantum layer, a key management layer, and an application layer. The keys are distributed in the first layer; they are handled in the second layer; and they are used in the third layer.

  8. How did the swiss cheese plant get its holes?

    Science.gov (United States)

    Muir, Christopher D

    2013-02-01

    Adult leaf fenestration in "Swiss cheese" plants (Monstera Adans.) is an unusual leaf shape trait lacking a convincing evolutionary explanation. Monstera are secondary hemiepiphytes that inhabit the understory of tropical rainforests, where photosynthesis from sunflecks often makes up a large proportion of daily carbon assimilation. Here I present a simple model of leaf-level photosynthesis and whole-plant canopy dynamics in a stochastic light environment. The model demonstrates that leaf fenestration can reduce the variance in plant growth and thereby increase geometric mean fitness. This growth-variance hypothesis also suggests explanations for conspicuous ontogenetic changes in leaf morphology (heteroblasty) in Monstera, as well as the absence of leaf fenestration in co-occurring juvenile tree species. The model provides a testable hypothesis of the adaptive significance of a unique leaf shape and illustrates how variance in growth rate could be an important factor shaping plant morphology and physiology.

  9. High temperature superconductors for fusion at the Swiss Plasma Center

    Science.gov (United States)

    Bruzzone, P.; Wesche, R.; Uglietti, D.; Bykovsky, N.

    2017-08-01

    High temperature superconductors (HTS) may become in future an option for the superconducting magnets of commercial fusion plants. At the Swiss Plasma Center (SPC) the R&D activity toward HTS high current, high field cables suitable for fusion magnets started in 2012 and led in 2015 to the assembly of the first 60 kA, 12 T prototype conductor. The cable concept developed at the SPC is based on the principle of ‘soldered, twisted stacks’ of REBCO tapes. The required number of stacks is assembled in a cored flat cable, cooled by forced flow of supercritical helium. The sample environment of the test facility at SPC has been upgraded with a HTS adapter and a counter-flow heat exchanger to allow testing the HTS sample in a broader range of temperature (4.5 K-50 K) using the existing, NbTi based superconducting transformer and the closed loop refrigerator.

  10. The role of skin self-examination at the Swiss skin cancer day

    OpenAIRE

    Badertscher, N; Meier, M.; T. Rosemann; Braun, R.; Cozzio, A.; Tag, B.; Wensing, M.; Tandjung, R

    2014-01-01

    Background The rising incidence of melanoma – Switzerland has the highest incidence in Europe - is a major public health challenge. Swiss dermatologist introduced the “Swiss Skin Cancer Day” (SSCD) in 2006, which provides skin cancer screening at no costs. The aim of the study was to describe the participating subjects and their motivation and investigate factors influencing the probability of a clinical diagnosis of skin malignancy. Methods 150 dermatologists were involved in the SSCD in May...

  11. Swiss Neutrality and Collective Security: The League of Nations and the United Nations

    Science.gov (United States)

    2010-03-01

    Sergio Stupan, Comment la Suisse a adhéré au Pacte de la Société des Nations (Lausanne: Université de Lausanne, 1943), 77ff. 40 In accepting these...resulted in a successful referendum.153 Active pacifist movements were established during World War I. According to Sergio Stupan, these movements...may be categorized into two groups. The first group, the Franco -Swiss Freemasons, the Swiss Peace Society, and the Socialists, had an “international

  12. Young people, parents and radical right voting. The case of the Swiss People's Party

    OpenAIRE

    Coffé, H.R.; Voorpostel, M.B.J.

    2010-01-01

    It is commonly found that young people tend to adopt the political party choice of their parents. However, far less is known about the applicability of this theory when investigating radical right support. Using the Swiss Household panel data (1999e2007), this study empirically identifies the relationship between parents’ preference for the Swiss radical right party SVP and their attitudes toward immigrants and the EU, and their offspring’s preference for the SVP. Disaggregating fathers’ and ...

  13. Fate of Mycobacterium avium subsp. paratuberculosis in Swiss Hard and Semihard Cheese Manufactured from Raw Milk

    OpenAIRE

    Spahr, U.; Schafroth, K.

    2001-01-01

    Raw milk was artificially contaminated with declumped cells of Mycobacterium avium subsp. paratuberculosis at a concentration of 104 to 105 CFU/ml and was used to manufacture model hard (Swiss Emmentaler) and semihard (Swiss Tisliter) cheese. Two different strains of M. avium subsp. paratuberculosis were tested, and for each strain, two model hard and semihard cheeses were produced. The survival of M. avium subsp. paratuberculosis cells was monitored over a ripening period of 120 days by plat...

  14. USA - Postponement of Deadline for Machine-Readable Passports

    CERN Multimedia

    2003-01-01

    U.S. Secretary of State Colin Powell has granted a postponement until October 26, 2004, as the date by which travellers holding Swiss passports must present a machine-readable passport at a U.S. port of entry to be admitted to the country without a visa. As in the past, citizens of Switzerland and other visa waiver program countries are permitted to enter the United States for general business or tourist purposes for a maximum of 90 days without needing a visa. Other categories of travellers such as students, journalists, individuals employed in the U.S., and all individuals staying for more than 90 days still require a visa. The postponement granted by the Secretary of State applies to a total to the following countries: Australia - Austria - Denmark - Finland - France - Germany - Iceland - Ireland - Italy - Japan - Monaco - Netherlands - New Zealand - Norway - Portugal - San Marino - Singapore - Spain - Sweden - Switzerland - United Kingdom More information available: http://www.us-embassy.ch Your Carlson...

  15. Extreme heat and runoff extremes in the Swiss Alps

    Directory of Open Access Journals (Sweden)

    M. Zappa

    2007-06-01

    Full Text Available The hydrological response of Swiss river basins to the 2003 European summer heatwave was evaluated by a combined analysis of historical discharge records and specific applications of distributed hydrological modeling. In the summer of 2003, the discharge from headwater streams of the Swiss Central Plateau was only 40%–60% of the long-term average. For alpine basins runoff was about 60%–80% of the average. Glacierized basins showed the opposite behavior. According to the degree of glacierization, the average summer runoff was close or even above average. The hydrological model PREVAH was applied for the period 1982–2005. Even if the model was not calibrated for such extreme meteorological conditions, it was well able to simulate the hydrological responses of three basins. The aridity index φ describes feedbacks between hydrological and meteorological anomalies, and was adopted as an indicator of hydrological drought. The anomalies of φ and temperature in the summer of 2003 exceeded the 1982–2005 mean by more than 2 standard deviations. Catchments without glaciers showed negative correlations between φ and discharge R. In basins with about 15% glacierization, φ and R were not correlated. River basins with higher glacier percentages showed a positive correlation between φ and R. Icemelt was positively correlated with φ and reduced the variability of discharge with larger amounts of meltwater. Runoff generation from the non-glaciated sub-areas was limited by high evapotranspiration and reduced precipitation. The 2003 summer heatwave could be a precursor to similar events in the near future. Hydrological models and further data analysis will allow the identification of the most sensitive regions where heatwaves may become a recurrent natural hazard with large environmental, social and economical impacts.

  16. Preliminary acute toxicity study on imidacloprid in Swiss albino mice

    Directory of Open Access Journals (Sweden)

    Preeti Bagri

    2013-12-01

    Full Text Available Aim: To ascertain the maximum tolerated dose (MTD and to investigate the acute oral toxic effects of imidacloprid towards Swiss albino male mice.Materials and Methods: The MTD of imidacloprid was determined in pilot dose range finding study following the standard method. Animals were observed for toxic signs and symptoms after oral administration of MTD of imidacloprid in single dose. The body weights of animals were recorded on alternate day. Animals were sacrificed on 14th day and changes in hematological parameters (Hb, TEC, TLC and DLC and morphometric measurements (length, breadth, thickness and weight of various body organs (heart, liver, spleen, kidney, testis and epididymis were examined. The student's t-test was applied to statistically analyze the results.Results: The MTD of imidacloprid was determined to be 110 mg/kg body weight. The sign and symptoms of acute toxicity were ataxia, rigidity and fasciculation of muscles, protrusion of eye ball and tremors of head. Imidacloprid treatment resulted in decreased body weight gain as compared to the control group. The changes in hematological parameters were not significant between imidacloprid treated and control groups. Also the values of relative organ weights and morphometric measurements of various body organs did not differ significantly between the control and imidacloprid treated animals.Conclusions: MTD of imidacloprid in Swiss albino male mice through oral route was determined for the first time. Study revealed a non-toxic effect of imidacloprid on body weight, relative organs weight, hematological parameters and morphometric measurements of various body organs in mice.

  17. Development and validation of a food pyramid for Swiss athletes.

    Science.gov (United States)

    Mettler, Samuel; Mannhart, Christof; Colombani, Paolo C

    2009-10-01

    Food-guide pyramids help translate nutrient goals into a visual representation of suggested food intake on a population level. No such guidance system has ever been specifically designed for athletes. Therefore, the authors developed a Food Pyramid for Swiss Athletes that illustrates the number of servings per food group needed in relation to the training volume of an athlete. As a first step, an average energy expenditure of 0.1 kcal . kg(-1) . min(-1) for exercise was defined, which then was translated into servings of different food groups per hour of exercise per day. Variable serving sizes were defined for athletes' different body-mass categories. The pyramid was validated by designing 168 daily meal plans according to the recommendations of the pyramid for male and female athletes of different body-mass categories and training volumes of up to 4 hr/d. The energy intake of the meal plans met the calculated reference energy requirement by 97% +/- 9%. The carbohydrate and protein intakes were linearly graded from 4.6 +/- 0.6-8.5 +/- 0.8 g . kg(-1) . d(-1) and 1.6 +/- 0.2-1.9 +/- 0.2 g . kg(-1) . d(-1), respectively, for training volumes of 1-4 hr of exercise per day. The average micronutrient intake depended particularly on the dietary energy intake level but was well above the dietary reference intake values for most micronutrients. No tolerable upper intake level was exceeded for any micronutrient. Therefore, this Food Pyramid for Swiss Athletes may be used as a new tool in sports nutrition education (e.g., teaching and counseling).

  18. Behavioral changes in female Swiss mice exposed to tannery effluents

    Directory of Open Access Journals (Sweden)

    Sabrina Ferreira de Almeida

    2016-06-01

    Full Text Available Among the anthropic activities generating potentially toxic residues are those involved with bovine hide processing (tannery industries. However, knowledge is scant regarding the damage caused to the health of various organisms by tannery waste and studies are rare, especially in mammalian experimental models. This study therefore aimed to evaluate the physical and behavioral effects of the exposure of female Swiss mice to tannery effluent. To accomplish this, for a period of 15 days the animals were fed tannery effluent diluted with water in the following concentrations: 0% (control group, received only potable water, 5% and 10%. The body mass of the animals was evaluated at the beginning and end of the experiment, as well as the daily consumption of water and food. After 15 days of exposure to the effluent, the animals were submitted to the elevated plus maze (predictive of anxiety and the forced swim test (predictive of depression. The treatments did not affect the animals' body mass, either in eating behavior or in consumption of water. However, it was found that the animals that ingested tannery effluent concentrations of 5% and 10% exhibited an anxiolytic (lower level of anxiety, greater percentage of time in the open arms, longer time and frequency in the diving behavior, less time of lurks and less frequency of freezing and an antidepressant effect (more time in climbing behavior and less time of immobility when compared to the control group. It was concluded that the exposure of female Swiss mice to tannery effluents (5% and 10% diluted with water causes behavioral changes, possibly related to the neurotoxicity of this waste, without causing physical changes in the animals.

  19. Prevention of dental accidents in Swiss boxing clubs.

    Science.gov (United States)

    Ifkovits, Tatjana; Kühl, Sebastian; Connert, Thomas; Krastl, Gabriel; Dagassan-Berndt1, Dorothea; Filippi, Andreas

    2015-01-01

    Boxing involves a high risk of dental trauma due to the impact of enormous external forces against the head. Wearing a mouthguard is, therefore, mandatory. The aim of this study was to evaluate the prevalence of dental trauma as well as the utilization and quality of mouthguards in Swiss boxing clubs. In order to achieve this, data on the mouthguards of 217 boxers in total were collected using questionnaires and examination forms, which were statistically evaluated. Out of the 217 boxers, 75 (34.6%) had already experienced a dental accident, but only 8 (10.7%) of them while practicing their sport. Professional boxers were most frequently affected by dental trauma (p = 0.001). Crown fractures were most often observed, followed by tooth dislocations. All interviewed athletes owned a mouthguard, which they used much more consistently during full-contact sparring (practice fighting) than during regular partner exercises. Most of the boxers used prefabricated mouthguards, which could be individually adapted using the “boil and bite” system. The majority of the athletes received their mouthguards from the boxing club. Impaired speaking when wearing a mouthguard was, by far, the problem most frequently mentioned by the athletes. In terms of these bothering factors, custom-made mouthguards from dentists received the best rating (p = 0.002). The quality of the mouthguard was assessed by evaluating the following criteria: coverage of the buccolabial surface, occlusal support of the opposing dentition, thickness of the occlusal layer, and rounded edges. Of the 215 mouthguards examined, 193 (89.8%) were insufficient (p = 0.002). Despite the observed deficiencies, only a few dental injuries occurred during boxing. This study shows that although basic preventive measures do exist in Swiss boxing, they should be improved substantially by providing better instruction and more information.

  20. Suicide tourism: a pilot study on the Swiss phenomenon.

    Science.gov (United States)

    Gauthier, Saskia; Mausbach, Julian; Reisch, Thomas; Bartsch, Christine

    2015-08-01

    While assisted suicide (AS) is strictly restricted in many countries, it is not clearly regulated by law in Switzerland. This imbalance leads to an influx of people-'suicide tourists'-coming to Switzerland, mainly to the Canton of Zurich, for the sole purpose of committing suicide. Political debate regarding 'suicide tourism' is taking place in many countries. Swiss medicolegal experts are confronted with these cases almost daily, which prompted our scientific investigation of the phenomenon. The present study has three aims: (1) to determine selected details about AS in the study group (age, gender and country of residence of the suicide tourists, the organisation involved, the ingested substance leading to death and any diseases that were the main reason for AS); (2) to find out the countries from which suicide tourists come and to review existing laws in the top three in order to test the hypothesis that suicide tourism leads to the amendment of existing regulations in foreign countries; and (3) to compare our results with those of earlier studies in Zurich. We did a retrospective data analysis of the Zurich Institute of Legal Medicine database on AS of non-Swiss residents in the last 5 years (2008-2012), and internet research for current legislation and political debate in the three foreign countries most concerned. We analysed 611 cases from 31 countries all over the world. Non-terminal conditions such as neurological and rheumatic diseases are increasing among suicide tourists. The unique phenomenon of suicide tourism in Switzerland may indeed result in the amendment or supplementary guidelines to existing regulations in foreign countries.

  1. Swiss University Students' Attitudes toward Pharmacological Cognitive Enhancement.

    Directory of Open Access Journals (Sweden)

    Larissa J Maier

    Full Text Available Pharmacological cognitive enhancement (PCE refers to the nonmedical use of prescription or recreational drugs to enhance cognitive performance. Several concerns about PCE have been raised in the public. The aim of the present study was to investigate students' attitudes toward PCE. Students at three Swiss universities were invited by e-mail to participate in a web-based survey. Of the 29,282 students who were contacted, 3,056 participated. Of these students, 22% indicated that they had used prescription drugs (12% or recreational substances including alcohol (14% at least once for PCE. The use of prescription drugs or recreational substances including alcohol prior to the last exam was reported by 16%. Users of pharmacological cognitive enhancers were more likely to consider PCE fair (24% compared with nonusers (11%. Only a minority of the participants agreed with the nonmedical use of prescription drugs by fellow students when assuming weak (7% or hypothetically strong efficacy and availability to everyone (14%. Two-thirds (68% considered performance that is obtained with PCE less worthy of recognition. Additionally, 80% disagreed that PCE is acceptable in a competitive environment. More than half (64% agreed that PCE in academia is similar to doping in sports. Nearly half (48% claimed that unregulated access to pharmacological cognitive enhancers increases the pressure to engage in PCE and educational inequality (55%. In conclusion, Swiss students' main concerns regarding PCE were related to coercion and fairness. As expected, these concerns were more prevalent among nonusers than among users of pharmacological cognitive enhancers. More balanced information on PCE should be shared with students, and future monitoring of PCE is recommended.

  2. Machine Learning examples on Invenio

    CERN Document Server

    CERN. Geneva

    2017-01-01

    This talk will present the different Machine Learning tools that the INSPIRE is developing and integrating in order to automatize as much as possible content selection and curation in a subject based repository.

  3. ENERGY STAR Certified Vending Machines

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Refrigerated Beverage Vending Machines that are...

  4. Particle accelerator; the Universe machine

    CERN Multimedia

    Yurkewicz, Katie

    2008-01-01

    "In summer 2008, scientists will switch on one of the largest machines in the world to search for the smallest of particle. CERN's Large Hadron Collider particle accelerator has the potential to chagne our understanding of the Universe."

  5. Quantum-Enhanced Machine Learning.

    Science.gov (United States)

    Dunjko, Vedran; Taylor, Jacob M; Briegel, Hans J

    2016-09-23

    The emerging field of quantum machine learning has the potential to substantially aid in the problems and scope of artificial intelligence. This is only enhanced by recent successes in the field of classical machine learning. In this work we propose an approach for the systematic treatment of machine learning, from the perspective of quantum information. Our approach is general and covers all three main branches of machine learning: supervised, unsupervised, and reinforcement learning. While quantum improvements in supervised and unsupervised learning have been reported, reinforcement learning has received much less attention. Within our approach, we tackle the problem of quantum enhancements in reinforcement learning as well, and propose a systematic scheme for providing improvements. As an example, we show that quadratic improvements in learning efficiency, and exponential improvements in performance over limited time periods, can be obtained for a broad class of learning problems.

  6. Quantum-Enhanced Machine Learning

    Science.gov (United States)

    Dunjko, Vedran; Taylor, Jacob M.; Briegel, Hans J.

    2016-09-01

    The emerging field of quantum machine learning has the potential to substantially aid in the problems and scope of artificial intelligence. This is only enhanced by recent successes in the field of classical machine learning. In this work we propose an approach for the systematic treatment of machine learning, from the perspective of quantum information. Our approach is general and covers all three main branches of machine learning: supervised, unsupervised, and reinforcement learning. While quantum improvements in supervised and unsupervised learning have been reported, reinforcement learning has received much less attention. Within our approach, we tackle the problem of quantum enhancements in reinforcement learning as well, and propose a systematic scheme for providing improvements. As an example, we show that quadratic improvements in learning efficiency, and exponential improvements in performance over limited time periods, can be obtained for a broad class of learning problems.

  7. Diamond turning machine controller implementation

    Energy Technology Data Exchange (ETDEWEB)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  8. The efficiency of combined machinings

    OpenAIRE

    2012-01-01

    This paper analyses the efficiency of the finish process applied in machining of hard surfaces, completed by grinding, hard turning and also by the combination of these two procedures, on the basis of time consumption.

  9. Machine learning for healthcare technologies

    CERN Document Server

    Clifton, David A

    2016-01-01

    This book brings together chapters on the state-of-the-art in machine learning (ML) as it applies to the development of patient-centred technologies, with a special emphasis on 'big data' and mobile data.

  10. SWISS-MODEL: modelling protein tertiary and quaternary structure using evolutionary information.

    Science.gov (United States)

    Biasini, Marco; Bienert, Stefan; Waterhouse, Andrew; Arnold, Konstantin; Studer, Gabriel; Schmidt, Tobias; Kiefer, Florian; Gallo Cassarino, Tiziano; Bertoni, Martino; Bordoli, Lorenza; Schwede, Torsten

    2014-07-01

    Protein structure homology modelling has become a routine technique to generate 3D models for proteins when experimental structures are not available. Fully automated servers such as SWISS-MODEL with user-friendly web interfaces generate reliable models without the need for complex software packages or downloading large databases. Here, we describe the latest version of the SWISS-MODEL expert system for protein structure modelling. The SWISS-MODEL template library provides annotation of quaternary structure and essential ligands and co-factors to allow for building of complete structural models, including their oligomeric structure. The improved SWISS-MODEL pipeline makes extensive use of model quality estimation for selection of the most suitable templates and provides estimates of the expected accuracy of the resulting models. The accuracy of the models generated by SWISS-MODEL is continuously evaluated by the CAMEO system. The new web site allows users to interactively search for templates, cluster them by sequence similarity, structurally compare alternative templates and select the ones to be used for model building. In cases where multiple alternative template structures are available for a protein of interest, a user-guided template selection step allows building models in different functional states. SWISS-MODEL is available at http://swissmodel.expasy.org/.

  11. 4th Machining Innovations Conference

    CERN Document Server

    2014-01-01

    This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning. The target audience primarily comprises researchers and experts in the field but the book may also be beneficial for graduate students.

  12. Function Concepts for Machine Parts

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    1999-01-01

    The majority of resources, like time and costs, consumed in industrial product development can be related to detailed design, i.e. the materialisation of machine parts (German Maschinenteile). Existing design theories based on a systems approach, e.g. Haberfellner [5] all have function, i...... to be identification of a purposeful behaviour concept, i.e. function for a machine part. The contribution is based on the theory of technical systems, Hubka and the domain theory, Andreasen....

  13. Constructing a modern city machine

    DEFF Research Database (Denmark)

    Lindegaard, Hanne; Jørgensen, Ulrik

    1998-01-01

    Based on the Copenhagen sewers debates and constructions the role of changing perceptions of water, hygiene and environment is discussed in relation to the modernisation of cities by machinating flows and infrastructures.......Based on the Copenhagen sewers debates and constructions the role of changing perceptions of water, hygiene and environment is discussed in relation to the modernisation of cities by machinating flows and infrastructures....

  14. Biosleeve Human-Machine Interface

    Science.gov (United States)

    Assad, Christopher (Inventor)

    2016-01-01

    Systems and methods for sensing human muscle action and gestures in order to control machines or robotic devices are disclosed. One exemplary system employs a tight fitting sleeve worn on a user arm and including a plurality of electromyography (EMG) sensors and at least one inertial measurement unit (IMU). Power, signal processing, and communications electronics may be built into the sleeve and control data may be transmitted wirelessly to the controlled machine or robotic device.

  15. The Complexity of Abstract Machines

    Directory of Open Access Journals (Sweden)

    Beniamino Accattoli

    2017-01-01

    Full Text Available The lambda-calculus is a peculiar computational model whose definition does not come with a notion of machine. Unsurprisingly, implementations of the lambda-calculus have been studied for decades. Abstract machines are implementations schema for fixed evaluation strategies that are a compromise between theory and practice: they are concrete enough to provide a notion of machine and abstract enough to avoid the many intricacies of actual implementations. There is an extensive literature about abstract machines for the lambda-calculus, and yet—quite mysteriously—the efficiency of these machines with respect to the strategy that they implement has almost never been studied. This paper provides an unusual introduction to abstract machines, based on the complexity of their overhead with respect to the length of the implemented strategies. It is conceived to be a tutorial, focusing on the case study of implementing the weak head (call-by-name strategy, and yet it is an original re-elaboration of known results. Moreover, some of the observation contained here never appeared in print before.

  16. Machine function based control code algebras

    NARCIS (Netherlands)

    Bergstra, J.A.

    2008-01-01

    Machine functions have been introduced by Earley and Sturgis in [6] in order to provide a mathematical foundation of the use of the T-diagrams proposed by Bratman in [5]. Machine functions describe the operation of a machine at a very abstract level. A theory of hardware and software based on machin

  17. Machining dynamics fundamentals, applications and practices

    CERN Document Server

    Cheng, Kai

    2008-01-01

    Machining dynamics are vital to the performance of machine tools and machining processes in manufacturing. This book discusses the state-of-the-art applications, practices and research in machining dynamics. It presents basic theory, analysis and control methodology. It is useful for manufacturing engineers, supervisors, engineers and designers.

  18. Singer CNC sewing and embroidery machine

    Directory of Open Access Journals (Sweden)

    Lokodi Zsolt

    2011-12-01

    Full Text Available This paper presents the adaptation of a classic foot pedal operated Singer sewing machine to a computerized numerical control (CNC sewing and embroidery machine. This machine is composed of a Singer sewing machine and a two-degrees-of-freedom XY stage designed specifically for this application. The whole system is controlled from a PC using adequate CNC control software.

  19. Swiss AlpArray: deployment of the Swiss AlpArray temporary broad-band stations and their noise characterization

    Science.gov (United States)

    Molinari, Irene; Kissling, Edi; Clinton, John; Hetényi, György; Šipka, Vesna; Stipćević, Josip; Dasović, Iva; Solarino, Stefano; Wéber, Zoltán; Gráczer, Zoltán; Electronics Lab, SED

    2016-04-01

    One of the main actions of the AlpArray European initiative is the deployment of a dense seismic broad-band network, that complements the existing permanent stations. This will ensure a spatially homogeneous seismic coverage of the greater Alpine area for at least two years, allowing a great number of innovative scientific works to be carried out. Our contribution to the AlpArray Seismic Network consists in the deployment of 24 temporary broad-band stations: three in Switzerland, twelve in Italy, three in Croatia, three in Bosnia and Herzegovina and three in Hungary. This deployment is lead by ETH Zurich and founded by the Swiss-AlpArray Sinergia programme by SNSF, and is the result of a fruitful collaboration between five research institutes. Stations were installed between Autumn and Winter 2015. Our installations are both free field and in-house and consist of 21 STS-2 and 3 Trillium Compact sensors equipped with Taurus digitizers and 3G telemetry sending data in real time to the ETH EIDA node. In this work, we present sites and stations setting and we discuss in details the characteristics in terms of site effects and noise level of each station. In particular we analyse the power spectral density estimates investigating the major source of noise and the background noise related to seasons, time of the day, human activities and type of installation. In addition we will show examples of data usage - i.e. earthquake locations, noise cross correlations, measures of surface wave dispersion curves. We thanks the Swiss AlpArray Field Team: Blanchard A., Erlanger E. D., Jarić D., Herak D., M. Herak, Hermann M., Koelemeijer P. J., Markušić S., Obermann A., Sager K., Šikman S., Singer J., Winterberg S. SED Electronic Lab: Barman S., Graf P., Hansemann R., Haslinger F., Hiemer S., Racine R., Tanner R., Weber F.

  20. Central magnetic cooling and refrigeration machines (chiller) and their assessment. A feasibility study - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Egolf, P. W.; Gonin, C. [University of Applied Sciences of Western Switzerland, HEIG-VD, Yverdon-les Bains (Switzerland); Kitanovski, A. [University of Ljubljana, Ljubljana (Slovenia)

    2010-03-15

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a feasibility study made concerning magnetic cooling and refrigeration machines. This report presents a comprehensive thermodynamic and economic analysis of applications of rotary magnetic chillers. The study deals with magnetic chillers based on permanent magnets and superconducting magnets, respectively. The numerical design of permanent magnet assemblies with different magnetic flux densities is discussed. The authors note that superconducting magnetic chillers are feasible only in large-scale applications with over 1 MW of cooling power. This report describes new ideas for magnetic refrigeration technologies, which go beyond the state of the art. They show potential for a substantial reduction of costs and further improvements in efficiency. Rotary magnetic liquid chillers with 'wavy' structures and using micro tubes are discussed, as are superconducting magnetic chillers and future magneto-caloric technologies.

  1. Compiling scheme using abstract state machines

    OpenAIRE

    2003-01-01

    The project investigates the use of Abstract State Machine in the process of computer program compilation. Compilation is to produce machine-code from a source program written in a high-level language. A compiler is a program written for the purpose. Machine-code is the computer-readable representation of sequences of computer instructions. An Abstract State Machine (ASM) is a notional computing machine, developed by Yuri Gurevich, for accurately and easily representing the semantics of...

  2. Game-powered machine learning.

    Science.gov (United States)

    Barrington, Luke; Turnbull, Douglas; Lanckriet, Gert

    2012-04-24

    Searching for relevant content in a massive amount of multimedia information is facilitated by accurately annotating each image, video, or song with a large number of relevant semantic keywords, or tags. We introduce game-powered machine learning, an integrated approach to annotating multimedia content that combines the effectiveness of human computation, through online games, with the scalability of machine learning. We investigate this framework for labeling music. First, a socially-oriented music annotation game called Herd It collects reliable music annotations based on the "wisdom of the crowds." Second, these annotated examples are used to train a supervised machine learning system. Third, the machine learning system actively directs the annotation games to collect new data that will most benefit future model iterations. Once trained, the system can automatically annotate a corpus of music much larger than what could be labeled using human computation alone. Automatically annotated songs can be retrieved based on their semantic relevance to text-based queries (e.g., "funky jazz with saxophone," "spooky electronica," etc.). Based on the results presented in this paper, we find that actively coupling annotation games with machine learning provides a reliable and scalable approach to making searchable massive amounts of multimedia data.

  3. Mechanical design of walking machines.

    Science.gov (United States)

    Arikawa, Keisuke; Hirose, Shigeo

    2007-01-15

    The performance of existing actuators, such as electric motors, is very limited, be it power-weight ratio or energy efficiency. In this paper, we discuss the method to design a practical walking machine under this severe constraint with focus on two concepts, the gravitationally decoupled actuation (GDA) and the coupled drive. The GDA decouples the driving system against the gravitational field to suppress generation of negative power and improve energy efficiency. On the other hand, the coupled drive couples the driving system to distribute the output power equally among actuators and maximize the utilization of installed actuator power. First, we depict the GDA and coupled drive in detail. Then, we present actual machines, TITAN-III and VIII, quadruped walking machines designed on the basis of the GDA, and NINJA-I and II, quadruped wall walking machines designed on the basis of the coupled drive. Finally, we discuss walking machines that travel on three-dimensional terrain (3D terrain), which includes the ground, walls and ceiling. Then, we demonstrate with computer simulation that we can selectively leverage GDA and coupled drive by walking posture control.

  4. Reusable State Machine Code Generator

    Science.gov (United States)

    Hoffstadt, A. A.; Reyes, C.; Sommer, H.; Andolfato, L.

    2010-12-01

    The State Machine model is frequently used to represent the behaviour of a system, allowing one to express and execute this behaviour in a deterministic way. A graphical representation such as a UML State Chart diagram tames the complexity of the system, thus facilitating changes to the model and communication between developers and domain experts. We present a reusable state machine code generator, developed by the Universidad Técnica Federico Santa María and the European Southern Observatory. The generator itself is based on the open source project architecture, and uses UML State Chart models as input. This allows for a modular design and a clean separation between generator and generated code. The generated state machine code has well-defined interfaces that are independent of the implementation artefacts such as the middle-ware. This allows using the generator in the substantially different observatory software of the Atacama Large Millimeter Array and the ESO Very Large Telescope. A project-specific mapping layer for event and transition notification connects the state machine code to its environment, which can be the Common Software of these projects, or any other project. This approach even allows to automatically create tests for a generated state machine, using techniques from software testing, such as path-coverage.

  5. Machine Learning in Parliament Elections

    Directory of Open Access Journals (Sweden)

    Ahmad Esfandiari

    2012-09-01

    Full Text Available Parliament is considered as one of the most important pillars of the country governance. The parliamentary elections and prediction it, had been considered by scholars of from various field like political science long ago. Some important features are used to model the results of consultative parliament elections. These features are as follows: reputation and popularity, political orientation, tradesmen's support, clergymen's support, support from political wings and the type of supportive wing. Two parameters of reputation and popularity and the support of clergymen and religious scholars that have more impact in reducing of prediction error in election results, have been used as input parameters in implementation. In this study, the Iranian parliamentary elections, modeled and predicted using learnable machines of neural network and neuro-fuzzy. Neuro-fuzzy machine combines the ability of knowledge representation of fuzzy sets and the learning power of neural networks simultaneously. In predicting the social and political behavior, the neural network is first trained by two learning algorithms using the training data set and then this machine predict the result on test data. Next, the learning of neuro-fuzzy inference machine is performed. Then, be compared the results of two machines.

  6. Viscoelastic machine elements elastomers and lubricants in machine systems

    CERN Document Server

    MOORE, D F

    2015-01-01

    Viscoelastic Machine Elements, which encompass elastomeric elements (rubber-like components), fluidic elements (lubricating squeeze films) and their combinations, are used for absorbing vibration, reducing friction and improving energy use. Examplesinclude pneumatic tyres, oil and lip seals, compliant bearings and races, and thin films. This book sets out to show that these elements can be incorporated in machine analysis, just as in the case of conventional elements (e.g. gears, cogs, chaindrives, bearings). This is achieved by introducing elementary theory and models, by describing new an

  7. Spectrum Assignment Algorithm for Cognitive Machine-to-Machine Networks

    Directory of Open Access Journals (Sweden)

    Soheil Rostami

    2016-01-01

    Full Text Available A novel aggregation-based spectrum assignment algorithm for Cognitive Machine-To-Machine (CM2M networks is proposed. The introduced algorithm takes practical constraints including interference to the Licensed Users (LUs, co-channel interference (CCI among CM2M devices, and Maximum Aggregation Span (MAS into consideration. Simulation results show clearly that the proposed algorithm outperforms State-Of-The-Art (SOTA algorithms in terms of spectrum utilisation and network capacity. Furthermore, the convergence analysis of the proposed algorithm verifies its high convergence rate.

  8. Swiss-cheese D3- D7 soft SUSY breaking

    Science.gov (United States)

    Misra, Aalok; Shukla, Pramod

    2010-03-01

    We address issues related to (i) a proposal for resolving a long-standing tension between large volume cosmology and phenomenology as regards reconciliation of requirements of different gravitino masses within the same string-theoretic framework, as well as (ii) evaluation of soft supersymmetry breaking terms and open-string moduli masses in the context of type IIB large volume compactifications involving orientifolds of the Swiss-cheese Calabi-Yau WCP[1,1,1,6,9] with a single mobile space-time filling D3-brane and stacks of D7-branes wrapping the "big" divisor Σ as well as supporting D7-brane fluxes. In addition, we also include perturbative α-corrections and non-perturbative world-sheet instanton corrections to the Kähler potential as well as Euclidean D3-instanton superpotential. First, using the toric data for the aforementioned Swiss-cheese Calabi-Yau and GLSM techniques, we obtain in the large volume limit, the geometric Kähler potential for the big (and small) divisor(s) in terms of derivatives of genus-two Siegel theta functions. Next, we show that as the mobile space-time filling D3-brane moves from a particular non-singular elliptic curve embedded in the Swiss-cheese Calabi-Yau to another non-singular elliptic curve, it is possible to obtain 10 12 GeV gravitino during the primordial inflationary era as well as, e.g., a TeV gravitino in the present era, within the same set up for the same volume of the Calabi-Yau stabilized at around 10ls6. Then by constructing local (i.e. localized around the location of the mobile D3-brane in the Calabi-Yau) appropriate involutively-odd harmonic one-form on the big divisor that lies in coker(H∂¯,-(0,1)(CY)→iH∂¯,-(0,1)(Σ)) and extremizing the potential, we show that it is possible to obtain an O(1)g from the wrapping of D7-branes on the big divisor due to competing contributions from the Wilson line moduli relative to the divisor volume modulus. To permit gaugino condensation, we take the rigid limit of the

  9. Swiss residents' arguments for and against a career in medicine

    Directory of Open Access Journals (Sweden)

    Klaghofer Richard

    2006-08-01

    Full Text Available Abstract Background In some Western countries, the medical profession is continuously losing prestige, doctors are claiming of high demands, low rewards, and difficult structural working conditions. This study aimed to investigate the arguments given by Swiss residents for and against a career in medicine. Methods As part of a prospective cohort study of Swiss medical school graduates on career development, 567 fourth-year residents were asked to answer the free-response item of what arguments there still were in favour of or against a career in medicine. They also indicated whether they would choose the medical profession all over again (yes/no. The statements were transcribed, content categories inductively formulated, and their descriptions written down in a code manual. Arguments were encoded according to the code manual and assigned to eight content categories (Mayring's content analysis. Frequency distributions were given for categories and tested with Chi2-tests for differences in gender, speciality fields, and whether or not the respondent would again choose a career in medicine. Results The 567 participants made 1,640 statements in favour of and 1,703 statements against a career in medicine. The content analysis of the residents' answers yielded eight categories with arguments both for and against a career in medicine. Of all "statements for" responses, 70% fell into the two top-ranking categories of Personal experiences in day-to-day working life (41.2% and Interpersonal experiences in professional relationships (28.8%. The top-ranking category of the "statements against" arguments was General work-related structural conditions (32%, followed by Social prestige and health-policy aspects (21%. Main arguments in favour of a career in medicine were interdisciplinary challenge, combination of basic sciences and interpersonal concerns, helping suffering people, guarantee of a secure job; arguments against comprised high workload, time

  10. DayCent modelling of Swiss cropping systems

    Science.gov (United States)

    Necpalova, Magdalena; Lee, Juhwan; Büchi, Lucie; Mäder, Paul; Mayer, Jochen; Charles, Raphael; van der Heijden, Marcel; Six, Johan

    2016-04-01

    There is a growing need to identify and evaluate sustainable greenhouse gas (GHG) mitigation options, their bio-economic feasibility in the agricultural sector, and support implementation of agricultural GHG mitigation activities that are an integral part of climate change strategies. In recent years, several ecosystem biogeochemical process-based models and comprehensive decision making tools integrated with these models have been developed. The DayCent model simulates all major ecosystem processes that affect soil C and N dynamics, including plant production, water flow, heat transport, SOC decomposition, N mineralization and immobilization, nitrification, denitrification, and methane oxidation. However, if the model is to be reliably used for identification of GHG mitigation options and climate change strategies across the EU agricultural regions, it requires site- and region-specific calibration and evaluation. Here, we calibrated and validated the model to Swiss climate and soil conditions and management options using available long-term experimental data. Data on crop productivity, soil organic carbon and N2O emissions were derived from four field sites located in Thervil (1977-2013), Frick (2003-2013), Changins (1971-2013), and Reckenholz (2009-2013) that have evaluated the effects of agricultural input systems (specifically, organic, biodynamic, and conventional with and without manure additions) and soil management options (various tillage practices and cover cropping). The preliminary results show that the DayCent model was able to reproduce 76% of variability in the crop productivity (n = 1 316) and 75% variability in measured soil organic carbon (n = 402) across all long-term trials. Model calibration was evaluated against independent proportions of the data. The uncertainty in model predictions induced by model structure and uncertainty in the measured data still needs to be further evaluated using the Monte Carlo approach. The calibrated model will be

  11. Build your own time machine

    CERN Document Server

    Clegg, Brian

    2012-01-01

    There is no physical law to prevent time travel nothing in physics to say it is impossible. So who is to say it can't be done? In Build Your Own Time Machine, acclaimed science writer Brian Clegg takes inspiration from his childhood heroes, Doctor Who and H. G. Wells, to explain the nature of time. How do we understand it and why measure it the way we do? How did the theories of one man change the way time was perceived by the world? Why wouldn't H. G. Wells's time machine have worked? And what would we need to do to make a real one? Build Your Own Time Machine explores the amazing possib

  12. Emerging Paradigms in Machine Learning

    CERN Document Server

    Jain, Lakhmi; Howlett, Robert

    2013-01-01

    This  book presents fundamental topics and algorithms that form the core of machine learning (ML) research, as well as emerging paradigms in intelligent system design. The  multidisciplinary nature of machine learning makes it a very fascinating and popular area for research.  The book is aiming at students, practitioners and researchers and captures the diversity and richness of the field of machine learning and intelligent systems.  Several chapters are devoted to computational learning models such as granular computing, rough sets and fuzzy sets An account of applications of well-known learning methods in biometrics, computational stylistics, multi-agent systems, spam classification including an extremely well-written survey on Bayesian networks shed light on the strengths and weaknesses of the methods. Practical studies yielding insight into challenging problems such as learning from incomplete and imbalanced data, pattern recognition of stochastic episodic events and on-line mining of non-stationary ...

  13. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    Directory of Open Access Journals (Sweden)

    Berat Barıs BULDUM

    2013-01-01

    Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

  14. Higgs Machine Learning Challenge 2014

    CERN Multimedia

    Olivier, A-P; Bourdarios, C ; LAL / Orsay; Goldfarb, S ; University of Michigan

    2014-01-01

    High Energy Physics (HEP) has been using Machine Learning (ML) techniques such as boosted decision trees (paper) and neural nets since the 90s. These techniques are now routinely used for difficult tasks such as the Higgs boson search. Nevertheless, formal connections between the two research fields are rather scarce, with some exceptions such as the AppStat group at LAL, founded in 2006. In collaboration with INRIA, AppStat promotes interdisciplinary research on machine learning, computational statistics, and high-energy particle and astroparticle physics. We are now exploring new ways to improve the cross-fertilization of the two fields by setting up a data challenge, following the footsteps of, among others, the astrophysics community (dark matter and galaxy zoo challenges) and neurobiology (connectomics and decoding the human brain). The organization committee consists of ATLAS physicists and machine learning researchers. The Challenge will run from Monday 12th to September 2014.

  15. Single Bacteria as Turing Machines

    Science.gov (United States)

    Bos, Julia; Zang, Qiucen; Vyawahare, Saurabh; Austin, Robert

    2014-03-01

    In Allan Turing's famous 1950 paper on Computing Machinery and Intelligence, he started with the provocative statement: ``I propose to consider the question, `Can machines think?' This should begin with definitions of the meaning of the terms `machine' and `think'.'' In our own work on exploring the way that organisms respond to stress and evolve, it seems at times as if they come to remarkably fast solutions to problems, indicating some sort of very clever computational machinery. I'll discuss how it would appear that bacteria can indeed create a form of a Turing Machine, the first example of a computer, and how they might use this algorithm to do rapid evolution to solve a genomics problem.

  16. Plug into 'the modernizing machine'!

    DEFF Research Database (Denmark)

    Krejsler, John B.

    2013-01-01

    ‘The modernizing machine’ codes individual bodies, things and symbols with images from New Public Management, neoliberal and Knowledge Economy discourses. Drawing on Deleuze & Guattari’s concept of machines, this article explores how ‘the modernizing machine’ produces neo-liberal modernization...... of the public sector. Taking its point of departure in Danish university reform, the article explores how the university is transformed by this desiring-producing machine. ‘The modernizing machine’ wrestles with the so-called ‘democratic-Humboldtian machine’. The University Act of 2003 and the host of reforms...... bodies and minds simultaneously produce academic subjectivities by plugging into these transformative machinic forces and are produced as they are traversed by them. What is experienced as stressful closures vis-à-vis new opportunities depends to a great extent upon how these producing...

  17. Machine learning methods in chemoinformatics

    Science.gov (United States)

    Mitchell, John B O

    2014-01-01

    Machine learning algorithms are generally developed in computer science or adjacent disciplines and find their way into chemical modeling by a process of diffusion. Though particular machine learning methods are popular in chemoinformatics and quantitative structure–activity relationships (QSAR), many others exist in the technical literature. This discussion is methods-based and focused on some algorithms that chemoinformatics researchers frequently use. It makes no claim to be exhaustive. We concentrate on methods for supervised learning, predicting the unknown property values of a test set of instances, usually molecules, based on the known values for a training set. Particularly relevant approaches include Artificial Neural Networks, Random Forest, Support Vector Machine, k-Nearest Neighbors and naïve Bayes classifiers. WIREs Comput Mol Sci 2014, 4:468–481. How to cite this article: WIREs Comput Mol Sci 2014, 4:468–481. doi:10.1002/wcms.1183 PMID:25285160

  18. Vector grammars and PN machines

    Institute of Scientific and Technical Information of China (English)

    蒋昌俊

    1996-01-01

    The concept of vector grammars under the string semantic is introduced.The dass of vector grammars is given,which is similar to the dass of Chomsky grammars.The regular vector grammar is divided further.The strong and weak relation between the vector grammar and scalar grammar is discussed,so the spectrum system graph of scalar and vector grammars is made.The equivalent relation between the regular vector grammar and Petri nets (also called PN machine) is pointed.The hybrid PN machine is introduced,and its language is proved equivalent to the language of the context-free vector grammar.So the perfect relation structure between vector grammars and PN machines is formed.

  19. Machine learning phases of matter

    Science.gov (United States)

    Carrasquilla, Juan; Melko, Roger G.

    2017-02-01

    Condensed-matter physics is the study of the collective behaviour of infinitely complex assemblies of electrons, nuclei, magnetic moments, atoms or qubits. This complexity is reflected in the size of the state space, which grows exponentially with the number of particles, reminiscent of the `curse of dimensionality' commonly encountered in machine learning. Despite this curse, the machine learning community has developed techniques with remarkable abilities to recognize, classify, and characterize complex sets of data. Here, we show that modern machine learning architectures, such as fully connected and convolutional neural networks, can identify phases and phase transitions in a variety of condensed-matter Hamiltonians. Readily programmable through modern software libraries, neural networks can be trained to detect multiple types of order parameter, as well as highly non-trivial states with no conventional order, directly from raw state configurations sampled with Monte Carlo.

  20. Alpha Channeling in Mirror Machines

    Energy Technology Data Exchange (ETDEWEB)

    Fisch N.J.

    2005-10-19

    Because of their engineering simplicity, high-β, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

  1. Traditional machining processes research advances

    CERN Document Server

    2015-01-01

    This book collects several examples of research in machining processes. Chapter 1 provides information on polycrystalline diamond tool material and its emerging applications. Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Chapter 3 describes the estimation of cutting forces and tool wear using modified mechanistic models in high performance turning. Chapter 4 contains information on cutting under gas shields for industrial applications. Chapter 5 is dedicated to the machinability of magnesium and its alloys. Chapter 6 provides information on grinding science. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.    

  2. Machine learning for evolution strategies

    CERN Document Server

    Kramer, Oliver

    2016-01-01

    This book introduces numerous algorithmic hybridizations between both worlds that show how machine learning can improve and support evolution strategies. The set of methods comprises covariance matrix estimation, meta-modeling of fitness and constraint functions, dimensionality reduction for search and visualization of high-dimensional optimization processes, and clustering-based niching. After giving an introduction to evolution strategies and machine learning, the book builds the bridge between both worlds with an algorithmic and experimental perspective. Experiments mostly employ a (1+1)-ES and are implemented in Python using the machine learning library scikit-learn. The examples are conducted on typical benchmark problems illustrating algorithmic concepts and their experimental behavior. The book closes with a discussion of related lines of research.

  3. Aerosols generated during beryllium machining.

    Science.gov (United States)

    Martyny, J W; Hoover, M D; Mroz, M M; Ellis, K; Maier, L A; Sheff, K L; Newman, L S

    2000-01-01

    Some beryllium processes, especially machining, are associated with an increased risk of beryllium sensitization and disease. Little is known about exposure characteristics contributing to risk, such as particle size. This study examined the characteristics of beryllium machining exposures under actual working conditions. Stationary samples, using eight-stage Lovelace Multijet Cascade Impactors, were taken at the process point of operation and at the closest point that the worker would routinely approach. Paired samples were collected at the operator's breathing zone by using a Marple Personal Cascade Impactor and a 35-mm closed-faced cassette. More than 50% of the beryllium machining particles in the breathing zone were less than 10 microns in aerodynamic diameter. This small particle size may result in beryllium deposition into the deepest portion of the lung and may explain elevated rates of sensitization among beryllium machinists.

  4. Rotating electrical machines part 4: methods for determining synchronous machine quantities from tests

    CERN Document Server

    International Electrotechnical Commission. Geneva

    1985-01-01

    Applies to three-phase synchronous machines of 1 kVA rating and larger with rated frequency of not more than 400 Hz and not less than 15 Hz. An appendix gives unconfirmed test methods for determining synchronous machine quantities. Notes: 1 -Tests are not applicable to synchronous machines such as permanent magnet field machines, inductor type machines, etc. 2 -They also apply to brushless machines, but certain variations exist and special precautions should be taken.

  5. Controls and Machine Protection Systems

    CERN Document Server

    Carrone, E

    2016-01-01

    Machine protection, as part of accelerator control systems, can be managed with a 'functional safety' approach, which takes into account product life cycle, processes, quality, industrial standards and cybersafety. This paper will discuss strategies to manage such complexity and the related risks, with particular attention to fail-safe design and safety integrity levels, software and hardware standards, testing, and verification philosophy. It will also discuss an implementation of a machine protection system at the SLAC National Accelerator Laboratory's Linac Coherent Light Source (LCLS).

  6. Magnet management in electric machines

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, Patel Bhageerath; El-Refaie, Ayman Mohamed Fawzi; Huh, Kum Kang

    2017-03-21

    A magnet management method of controlling a ferrite-type permanent magnet electrical machine includes receiving and/or estimating the temperature permanent magnets; determining if that temperature is below a predetermined temperature; and if so, then: selectively heating the magnets in order to prevent demagnetization and/or derating the machine. A similar method provides for controlling magnetization level by analyzing flux or magnetization level. Controllers that employ various methods are disclosed. The present invention has been described in terms of specific embodiment(s), and it is recognized that equivalents, alternatives, and modifications, aside from those expressly stated, are possible and within the scope of the appending claims.

  7. Cooling system for rotating machine

    Science.gov (United States)

    Gerstler, William Dwight; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Alexander, James Pellegrino; Quirion, Owen Scott; Palafox, Pepe; Shen, Xiaochun; Salasoo, Lembit

    2011-08-09

    An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

  8. Magnet management in electric machines

    Science.gov (United States)

    Reddy, Patel Bhageerath; El-Refaie, Ayman Mohamed Fawzi; Huh, Kum Kang

    2017-03-21

    A magnet management method of controlling a ferrite-type permanent magnet electrical machine includes receiving and/or estimating the temperature permanent magnets; determining if that temperature is below a predetermined temperature; and if so, then: selectively heating the magnets in order to prevent demagnetization and/or derating the machine. A similar method provides for controlling magnetization level by analyzing flux or magnetization level. Controllers that employ various methods are disclosed. The present invention has been described in terms of specific embodiment(s), and it is recognized that equivalents, alternatives, and modifications, aside from those expressly stated, are possible and within the scope of the appending claims.

  9. Towards green lubrication in machining

    CERN Document Server

    Liew Yun Hsien, Willey

    2014-01-01

    The book gives an overview of environmental friendly gaseous and vapour, refrigerated compressed gas, solid lubricant, mist lubrication, minimum quantity lubrication (MQL) and vegetable oils that can be used as lubricants and additives in industrial machining applications. This book introduces vegetable oils as viable and good alternative resources because of their environmental friendly, non-toxic and readily biodegradable nature.  The effectiveness of various types of vegetables oils as lubricants and additives in reducing wear and friction is discussed in this book. Engineers and scientist working in the field of lubrication and machining will find this book useful.

  10. SEBARAN STASIONER PADA SISTEM BONUS-MALUS SWISS SERTA MODIFIKASINYA (Stationary Distribution of Swiss Bonus-Malus System and its Modification

    Directory of Open Access Journals (Sweden)

    Cherry Galatia Ballangan

    2002-01-01

    Full Text Available Bonus-Malus System is a system in actuary that introduce the premium class (state partition, where the state is influenced by the number of annual claims reported by the policy holder. We could base the determination of the state on the stationary distribution that represent the number of policy holders in any state. Swiss Bonus-Malus System has 22 state. The number of state that involved in this system result in the difficulty of stationary distribution determination. Therefore, the aim of this paper is to study a method to obtain stationary distribution of Swiss Bonus-Malus System by recursive formula, with this recursive formula, the stationary distribution of Swiss Bonus-Malus System can be determined easier. Modification of this system with infinite state result in the changes of recursive formula to obtain the stationary. This changes including the determining of base value of the recursive formula. Abstract in Bahasa Indonesia : Sistem Bonus-Malus merupakan sistem dalam aktuaria yang memperkenalkan pembagian kelas premi (state yang dipengaruhi oleh jumlah klaim yang diajukan oleh pemegang polis tiap tahunnya. Penetapan state dalam sistem ini didasarkan pada pencarian sebaran stasioner yang menyatakan banyaknya pemegang polis dalam tiap state. Sistem Bonus-Malus Swiss (BMS memiliki 22 state. Banyaknya state yang terlibat dalam sistem ini mengakibatkan sulitnya penentuan sebaran stasioner pada sistem BMS tersebut. Karena itu dalam tulisan ini dipelajari suatu metode penentuan sebaran stasioner dari sistem BMS tersebut, yaitu dengan menggunakan formula rekursif. Dengan formula rekursif ini, sebaran stasioner sistem BMS dapat ditentukan dengan mudah. Modifikasi sistem BMS untuk jumlah state yang tak hingga mengakibatkan perubahan pada formula rekursif untuk mencari sebaran stasionernya. Perubahan ini meliputi penetapan nilai awal dari formula rekursif tersebut. Kata kunci: sebaran stasioner, formula rekursif, sistem Monus-Malus Swiss.

  11. La machine à remonter le temps

    CERN Multimedia

    Piquard, Patrice

    2006-01-01

    To find the secret of matter, the European Center for Nuclear Research (Cern) is building, on the Swiss border, LHC, a particle accelerator able to re-create the origines of the Universe. Price: 2,3 billions of Euros. And 800 millions for the experiments... (1 page)

  12. Machine-to-machine communications architectures, technology, standards, and applications

    CERN Document Server

    Misic, Vojislav B

    2014-01-01

    With the number of machine-to-machine (M2M)-enabled devices projected to reach 20 to 50 billion by 2020, there is a critical need to understand the demands imposed by such systems. Machine-to-Machine Communications: Architectures, Technology, Standards, and Applications offers rigorous treatment of the many facets of M2M communication, including its integration with current technology.Presenting the work of a different group of international experts in each chapter, the book begins by supplying an overview of M2M technology. It considers proposed standards, cutting-edge applications, architectures, and traffic modeling and includes case studies that highlight the differences between traditional and M2M communications technology.Details a practical scheme for the forward error correction code designInvestigates the effectiveness of the IEEE 802.15.4 low data rate wireless personal area network standard for use in M2M communicationsIdentifies algorithms that will ensure functionality, performance, reliability, ...

  13. Learning as a Machine: Crossovers between Humans and Machines

    Science.gov (United States)

    Hildebrandt, Mireille

    2017-01-01

    This article is a revised version of the keynote presented at LAK '16 in Edinburgh. The article investigates some of the assumptions of learning analytics, notably those related to behaviourism. Building on the work of Ivan Pavlov, Herbert Simon, and James Gibson as ways of "learning as a machine," the article then develops two levels of…

  14. The Perfect Science Machine

    Science.gov (United States)

    2008-05-01

    ESO celebrates 10 years since First Light of the VLT Today marks the 10th anniversary since First Light with ESO's Very Large Telescope (VLT), the most advanced optical telescope in the world. Since then, the VLT has evolved into a unique suite of four 8.2-m Unit Telescopes (UTs) equipped with no fewer than 13 state-of-the-art instruments, and four 1.8-m moveable Auxiliary Telescopes (ATs). The telescopes can work individually, and they can also be linked together in groups of two or three to form a giant 'interferometer' (VLTI), allowing astronomers to see details corresponding to those from a much larger telescope. Green Flash at Paranal ESO PR Photo 16a/08 The VLT 10th anniversary poster "The Very Large Telescope array is a flagship facility for astronomy, a perfect science machine of which Europe can be very proud," says Tim de Zeeuw, ESO's Director General. "We have built the most advanced ground-based optical observatory in the world, thanks to the combination of a long-term adequately-funded instrument and technology development plan with an approach where most of the instruments were built in collaboration with institutions in the member states, with in-kind contributions in labour compensated by guaranteed observing time." Sitting atop the 2600m high Paranal Mountain in the Chilean Atacama Desert, the VLT's design, suite of instruments, and operating principles set the standard for ground-based astronomy. It provides the European scientific community with a telescope array with collecting power significantly greater than any other facilities available at present, offering imaging and spectroscopy capabilities at visible and infrared wavelengths. Blue Flash at Paranal ESO PR Photo 16b/08 A Universe of Discoveries The first scientifically useful images, marking the official 'First Light' of the VLT, were obtained on the night of 25 to 26 May 1998, with a test camera attached to "Antu", Unit Telescope number 1. They were officially presented to the press on

  15. Online algorithms for scheduling with machine activation cost on two uniform machines

    Institute of Scientific and Technical Information of China (English)

    HAN Shu-guang; JIANG Yi-wei; HU Jue-liang

    2007-01-01

    In this paper we investigate a variant of the scheduling problem on two uniform machines with speeds 1 and s. For this problem, we are given two potential uniform machines to process a sequence of independent jobs. Machines need to be activated before starting to process, and each machine activated incurs a fixed machine activation cost. No machines are initially activated,and when a job is revealed, the algorithm has the option to activate new machines. The objective is to minimize the sum of the makespan and the machine activation cost. We design optimal online algorithms with competitive ratio of (2s+1)/(s+1) for every s≥1.

  16. and white Swiss chard and maintenance of normal blood LDL-cholesterol concentration pursuant to Article 13(5) of Regulation (EC) No 1924/2006

    DEFF Research Database (Denmark)

    Tetens, Inge

    (Beta vulgaris L. var. cicla) and white Swiss chard (Beta vulgaris L. var. cicla), is sufficiently characterised. The claimed effect, maintenance of normal blood LDL-cholesterol concentration, is a beneficial physiological effect. No human intervention studies from which conclusions could be drawn...... Swiss chard and white Swiss chard and maintenance of normal blood LDL-cholesterol concentration....

  17. Cadmium and chromium effects on seed germination and root elongation in lettuce, spinach and Swiss chard

    Directory of Open Access Journals (Sweden)

    Oscar V Bautista

    2013-04-01

    Full Text Available The La Ramada district and the Bogota River are the principal water resources used for horticultural crop production on the Bogota Plateau, which contain channel pollutant materials, including heavy metals due to domestic and industrial activities on the Plateau. These materials have effects on crop production in this zone. The present research, under laboratory conditions, aimed to evaluate the effect of three concentrations (25, 35 and 50 µM L-1 of cadmium (Cd and chromium (Cr on imbibition, seed germination and root elongation in lettuce (Lactuca sativa var. Batavia, Swiss chard (Beta vulgaris var. cicla "White Ribbed", and spinach (Spinacia oleracea Hib. 424, three species widely cultivated on the Plateau. The three species used for evaluation showed a differential susceptibility response to Cd and Cr. In lettuce, fresh weight increase (imbibition was lower with all Cd concentrations at the last day of observation and at 25 µM L-1 of Cd in Swiss chard. Cadmium reduced seed germination by up to 46%, 97% and 8% in Swiss chard, lettuce and spinach, respectively. Also, root elongation decreased in Cd treatments by up to 57%, 89% and 56%, for Swiss chard, lettuce and spinach, respectively. Chromium, which showed fewer negative effects, decreased germination by up to 29% in Swiss chard, 6% in lettuce and 34% in spinach, as compared to the control

  18. Investigation of Surfaces after Non Conventional Machining

    Science.gov (United States)

    Micietova, Anna; Neslusan, Miroslav; Cillikova, Maria

    2016-12-01

    This paper deals with analysis of surface integrity of steel after electro discharge machining (EDM), water jet machining, (WJM) laser beam machining (LBM) and plasma beam machining (PBM). The paper discusses surface integrity expressed in surface roughness, sample precision expressed in perpendicularity deviation as well as stress state. This study also demonstrates influence of the various non-conventional methods on structure transformations and reports about sensitivity of the different non-conventional methods of machining with regard to variable thickness of machined samples.

  19. Diterpenoid alkaloid toxicosis in cattle in the Swiss Alps.

    Science.gov (United States)

    Puschner, Birgit; Booth, Marcia C; Tor, Elizabeth R; Odermatt, Arnold

    2002-02-01

    Between 1995 and 1999, several cattle of a group of 80 heifers died acutely on a pasture in the Swiss Alps. The animals were Found dead between July 9th and 15th eachyear. Only 1 animal was examined on post-mortem, and no significant lesions were found. Aconitum vulpera, A napellus, and Delphinium elatum were identified in the pasture. The presence of diterpenoid alkaloid-containing plants in the pasture, the rapid death of the animals, and the lack of pathologic lesions suggested diterpenoid alkaloid toxicosis as a cause of death. A multiresidue alkaloid screen using gas chromatography with a mass spectrometric detector was employed on rumen, abomasal, small intestine, and cecal contents from the I heifer. Deltaline, deltamine, and lycoctonine were identified. Aconitine was found in all gastrointestinal samples using a sensitive and highly specific liquid chromatography/mass spectrometry methodology for aconitine analysis. The findings ofditerpenoid alkaloids in the gastrointestinal contents confirmed exposure to Delphinium and Aconitum spp, possibly resulting in sudden death.

  20. On cosmological observables in a swiss-cheese universe

    CERN Document Server

    Marra, Valerio; Matarrese, Sabino; Riotto, Antonio

    2007-01-01

    Photon geodesics are calculated in a swiss-cheese model, where the cheese is made of the usual Friedmann-Robertson-Walker solution and the holes are constructed from a Lemaitre-Tolman-Bondi solution of Einstein's equations. The observables on which we focus are the changes in the redshift, in the angular-diameter--distance relation, in the luminosity-distance--redshift relation, and in the corresponding distance modulus. We find that redshift effects are suppressed when the hole is small because of a compensation effect acting on the scale of half a hole resulting from the special case of spherical symmetry. However, we find interesting effects in the calculation of the angular distance: strong evolution of the inhomogeneities (as in the approach to caustic formation) causes the photon path to deviate from that of the FRW case. Therefore, the inhomogeneities are able to partly mimic the effects of a dark-energy component. Our results also suggest that the nonlinear effects of caustic formation in cold dark ma...

  1. Cosmological observables in a Swiss-cheese universe

    Science.gov (United States)

    Marra, Valerio; Kolb, Edward W.; Matarrese, Sabino; Riotto, Antonio

    2007-12-01

    Photon geodesics are calculated in a Swiss-cheese model, where the cheese is made of the usual Friedmann-Robertson-Walker (FRW) solution and the holes are constructed from a Lemaître-Tolman-Bondi solution of Einstein’s equations. The observables on which we focus are the changes in the redshift, in the angular-diameter-distance relation, in the luminosity-distance-redshift relation, and in the corresponding distance modulus. We find that redshift effects are suppressed when the hole is small because of a compensation effect acting on the scale of half a hole resulting from the special case of spherical symmetry. However, we find interesting effects in the calculation of the angular distance: strong evolution of the inhomogeneities (as in the approach to caustic formation) causes the photon path to deviate from that of the FRW case. Therefore, the inhomogeneities are able to partly mimic the effects of a dark-energy component. Our results also suggest that the nonlinear effects of caustic formation in cold dark matter models may lead to interesting effects on photon trajectories.

  2. The Szekeres Swiss Cheese model and the CMB observations

    Science.gov (United States)

    Bolejko, Krzysztof

    2009-08-01

    This paper presents the application of the Szekeres Swiss Cheese model to the analysis of observations of the cosmic microwave background (CMB) radiation. The impact of inhomogeneous matter distribution on the CMB observations is in most cases studied within the linear perturbations of the Friedmann model. However, since the density contrast and the Weyl curvature within the cosmic structures are large, this issue is worth studying using another approach. The Szekeres model is an inhomogeneous, non-symmetrical and exact solution of the Einstein equations. In this model, light propagation and matter evolution can be exactly calculated, without such approximations as small amplitude of the density contrast. This allows to examine in more realistic manner the contribution of the light propagation effect to the measured CMB temperature fluctuations. The results of such analysis show that small-scale, non-linear inhomogeneities induce, via Rees-Sciama effect, temperature fluctuations of amplitude 10-7-10-5 on angular scale ϑ 750). This is still much smaller than the measured temperature fluctuations on this angular scale. However, local and uncompensated inhomogeneities can induce temperature fluctuations of amplitude as large as 10-3, and thus can be responsible the low multipoles anomalies observed in the angular CMB power spectrum.

  3. Payment schemes and cost efficiency: evidence from Swiss public hospitals.

    Science.gov (United States)

    Meyer, Stefan

    2015-03-01

    This paper aims at analysing the impact of prospective payment schemes on cost efficiency of acute care hospitals in Switzerland. We study a panel of 121 public hospitals subject to one of four payment schemes. While several hospitals are still reimbursed on a per diem basis for the treatment of patients, most face flat per-case rates-or mixed schemes, which combine both elements of reimbursement. Thus, unlike previous studies, we are able to simultaneously analyse and isolate the cost-efficiency effects of different payment schemes. By means of stochastic frontier analysis, we first estimate a hospital cost frontier. Using the two-stage approach proposed by Battese and Coelli (Empir Econ 20:325-332, 1995), we then analyse the impact of these payment schemes on the cost efficiency of hospitals. Controlling for hospital characteristics, local market conditions in the 26 Swiss states (cantons), and a time trend, we show that, compared to per diem, hospitals which are reimbursed by flat payment schemes perform better in terms of cost efficiency. Our results suggest that mixed schemes create incentives for cost containment as well, although to a lesser extent. In addition, our findings indicate that cost-efficient hospitals are primarily located in cantons with competitive markets, as measured by the Herfindahl-Hirschman index in inpatient care. Furthermore, our econometric model shows that we obtain biased estimates from frontier analysis if we do not account for heteroscedasticity in the inefficiency term.

  4. Spectral Action Models of Gravity on Packed Swiss Cheese Cosmology

    CERN Document Server

    Ball, Adam

    2015-01-01

    We present a model of (modified) gravity on spacetimes with fractal structure based on packing of spheres, which are (Euclidean) variants of the Packed Swiss Cheese Cosmology models. As the action functional for gravity we consider the spectral action of noncommutative geometry, and we compute its asymptotic expansion on a space obtained as an Apollonian packing of 3-dimensional spheres inside a 4-dimensional ball. Using information from the zeta function of the Dirac operator of the spectral triple, we show that the leading terms in the asymptotic expansion of the spectral action consist of a zeta regularization of the divergent sum of the leading terms of the spectral actions of the individual spheres in the packing, which accounts for the contribution of the points 1 and 3 in the dimension spectrum (as in the case of a 3-sphere). There is also an additional term coming from the residue at the additional point in the dimension spectrum that corresponds to the packing constant. It detects the fractality of t...

  5. Biomass - Overview of Swiss Research Programme 2003; Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Binggeli, D.; Guggisberg, B.

    2003-07-01

    This overview for the Swiss Federal Office of Energy (SFOE) discusses the results obtained in 2003 in various research projects worked on in Switzerland on the subject of biomass. In the biomass combustion area, subjects discussed include system optimisation for automatic firing, combustion particles, low-particle pellet furnaces, design and optimisation of wood-fired storage ovens, efficiency of filtering techniques and methane generation from wood. Also, an accredited testing centre for wood furnaces is mentioned and measurements made on an installation are presented. As far as the fermentation of biogenic wastes is concerned, biogas production from dairy-product wastes is described. Other projects discussed include a study on eco-balances of energy products, certification and marketing of biogas, evaluation of membranes, a measurement campaign for solar sludge-drying, the operation of a percolator installation for the treatment of bio-wastes, the effects of compost on the environment and the fermentation of coffee wastes. Also, statistics on biogas production in 2002 is looked at. Finally, a preliminary study on biofuels is presented.

  6. Attitude to Helicobacter pylori infection among Swiss gastroenterologists.

    Science.gov (United States)

    Binek, J; Fantin, A C; Meyenberger, C

    1999-03-20

    To assess the current attitude to Helicobacter pylori infection in Switzerland, since a review of the literature reveals few publications dealing with application of therapeutic recommendations. The initial diagnostic methods, the indications for eradication therapy, the therapeutic regimen and its duration, together with eradication control, were indicated in questionnaires sent out to the members of the Swiss Society for Gastroenterology and Hepatology at the beginning of 1997. Helicobacter pylori was diagnosed mainly with a rapid urease test and/or histology. Peptic ulcer disease (100%), mucosa associated lymphoid tissue (MALT) lymphoma (94.5%) and therapy-resistant dyspepsia (78.7%) were clear indications for Helicobacter pylori eradication. Only a minority eradicated Helicobacter pylori in all positive subjects. 7-day triple therapy (with proton pump inhibitors, a macrolide antibiotic and an imidazole derivative) is the preferred first line treatment. The eradication of Helicobacter pylori in ulcer disease is established practice. Non-ulcer dyspepsia remains a controversial but often used indication. Two antibiotics together with proton pump inhibitors constitute the mostly widely used eradication therapy.

  7. [Paragliding accidents--a prospective analysis in Swiss mountain regions].

    Science.gov (United States)

    Lautenschlager, S; Karli, U; Matter, P

    1993-01-01

    During the period from 1.1 to 31.12.90, 86 injuries associated with paragliding were analysed in a prospective study in 12 different Swiss hospitals with reference to causes, patterns, and frequencies. Spine injuries (36%) and lesions of the lower extremities (35%) were diagnosed most frequently. Surprisingly no neurological complications occurred, which is possibly explained by the solitary axial trauma. In 15 cases very severe malleolar fractures required surgical intervention. One accident was fatal due to a lung rupture. 60% of all accidents happened during the landing phase, 26% at launching and 14% at flight. Half of the pilots were affected in their primary training course. Most accidents were due to an in-flight error of judgement, such as incorrect estimation of wind conditions and a choice of unfavourable landing sites. In contrast to early reports of hang-gliding injuries, only one accident was due to an equipment failure, namely a ruptured steering line. In more than a third of all accidents, the used paraglider was not in correct correlation with the pilot's weight and experience. Inspired by the desire for a long flight, gliders of too large surface-areas were often used, leading to a more unstable flight. To reduce the frequency of paragliding injuries, an accurate choice of equipment and increased attention to environmental factors is mandatory. Furthermore education-programs should focus more on intensifying the pilot's mental and practical skills.

  8. 78 FR 40688 - Notice of Availability of a Pest Risk Analysis for the Importation of Swiss Chard From Colombia...

    Science.gov (United States)

    2013-07-08

    ... Importation of Swiss Chard From Colombia Into the Continental United States AGENCY: Animal and Plant Health... Colombia into the continental United States. Based on that analysis, we have concluded that the application... introducing or disseminating plant pests or noxious weeds via the importation of Swiss chard from Colombia....

  9. 78 FR 69640 - Notice of Decision To Authorize the Importation of Swiss Chard From Colombia Into the Continental...

    Science.gov (United States)

    2013-11-20

    ... From Colombia Into the Continental United States AGENCY: Animal and Plant Health Inspection Service... importation into the continental United States of Swiss chard from Colombia. Based on the findings of a pest... importation of Swiss chard from Colombia. DATES: Effective: November 20, 2013. FOR FURTHER INFORMATION...

  10. 75 FR 37406 - Order Exempting the Trading and Clearing of Certain Products Related to ETFS Physical Swiss Gold...

    Science.gov (United States)

    2010-06-29

    ... COMMISSION Order Exempting the Trading and Clearing of Certain Products Related to ETFS Physical Swiss Gold... Physical Swiss Gold Shares (``Gold Products'') and ETFS Physical Silver Shares (``Silver Products'') (collectively, ``Gold and Silver Products''), which would be traded on national securities exchanges (as to...

  11. Coordination Control Of Complex Machines

    NARCIS (Netherlands)

    J.C.M. Baeten; B. van Beek; J. Markovski; L.J.A.M. Somers

    2015-01-01

    Control and coordination are important aspects of the development of complex machines due to an ever-increasing demand for better functionality, quality, and performance. In WP6 of the C4C project, we developed a synthesis-centric systems engineering framework suitable for supervisory coordination o

  12. Attention: A Machine Learning Perspective

    DEFF Research Database (Denmark)

    Hansen, Lars Kai

    2012-01-01

    We review a statistical machine learning model of top-down task driven attention based on the notion of ‘gist’. In this framework we consider the task to be represented as a classification problem with two sets of features — a gist of coarse grained global features and a larger set of low...

  13. Machine Learning applications in CMS

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Machine Learning is used in many aspects of CMS data taking, monitoring, processing and analysis. We review a few of these use cases and the most recent developments, with an outlook to future applications in the LHC Run III and for the High-Luminosity phase.

  14. Parsing statistical machine translation output

    NARCIS (Netherlands)

    Carter, S.; Monz, C.; Vetulani, Z.

    2009-01-01

    Despite increasing research into the use of syntax during statistical machine translation, the incorporation of syntax into language models has seen limited success. We present a study of the discriminative abilities of generative syntax-based language models, over and above standard n-gram models,

  15. Man-machine interactions 3

    CERN Document Server

    Czachórski, Tadeusz; Kozielski, Stanisław

    2014-01-01

    Man-Machine Interaction is an interdisciplinary field of research that covers many aspects of science focused on a human and machine in conjunction.  Basic goal of the study is to improve and invent new ways of communication between users and computers, and many different subjects are involved to reach the long-term research objective of an intuitive, natural and multimodal way of interaction with machines.  The rapid evolution of the methods by which humans interact with computers is observed nowadays and new approaches allow using computing technologies to support people on the daily basis, making computers more usable and receptive to the user's needs.   This monograph is the third edition in the series and presents important ideas, current trends and innovations in  the man-machine interactions area.  The aim of this book is to introduce not only hardware and software interfacing concepts, but also to give insights into the related theoretical background. Reader is provided with a compilation of high...

  16. Teaching Machines to Think Fuzzy

    Science.gov (United States)

    Technology Teacher, 2004

    2004-01-01

    Fuzzy logic programs for computers make them more human. Computers can then think through messy situations and make smart decisions. It makes computers able to control things the way people do. Fuzzy logic has been used to control subway trains, elevators, washing machines, microwave ovens, and cars. Pretty much all the human has to do is push one…

  17. Macchines per scoprire - Discovery Machines

    CERN Multimedia

    Auditorium, Rome

    2016-01-01

    During the FCC week 2016 a public event entitled “Discovery Machines: The Higgs Boson and the Search for New Physics took place on 14 April at the Auditorium in Rome. The event, brought together physicists and experts from economics to discuss intriguing questions on the origin and evolution of the Universe and the societal impact of large-scale research projects.

  18. Precision Machining Technology. Curriculum Guide.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This curriculum guide was developed from a Technical Committee Report prepared with the assistance of industry personnel and containing a Task List which is the basis of the guide. It presents competency-based program standards for courses in precision machining technology and is part of the Idaho Vocational Curriculum Guide Project, a cooperative…

  19. The Garden and the Machine

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2014-01-01

    The aim of this paper is to explore how the concepts of garden and machine might inform our understanding of the complex relationship between infrastructure and nature. The garden is introduced as a third nature and used to shed a critical light on the promotion of landscape ‘as’ infrastructure...

  20. Automatic Evaluation of Machine Translation

    DEFF Research Database (Denmark)

    Martinez, Mercedes Garcia; Koglin, Arlene; Mesa-Lao, Bartolomé

    2015-01-01

    The availability of systems capable of producing fairly accurate translations has increased the popularity of machine translation (MT). The translation industry is steadily incorporating MT in their workflows engaging the human translator to post-edit the raw MT output in order to comply with a set...

  1. THE GARDEN AND THE MACHINE

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2012-01-01

    The aim of this paper is to explore how the concepts of garden and machine might inform our understanding of the complex relationship between infrastructure and nature. The garden is introduced as a third nature and used to shed a critical light on the promotion of landscape as infrastructure...

  2. Dimensioning, Tolerancing, and Machine Finishes.

    Science.gov (United States)

    Adams, George C.

    Intended for use with the vocational education student interested in technical drawing, this guide provides answers to questions relating to dimensioning and tolerancing machine drawings. It also gives examples of standard dimensioning practices, tolerancing applications, and finish applications. The problems and examples presented are based on…

  3. High Temperature Superconductor Machine Prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2011-01-01

    A versatile testing platform for a High Temperature Superconductor (HTS) machine has been constructed. The stationary HTS field winding can carry up to 10 coils and it is operated at a temperature of 77K. The rotating armature is at room temperature. Test results and performance for the HTS field...

  4. Machine Tool Operation, Course Description.

    Science.gov (United States)

    Denny, Walter E.; Anderson, Floyd L.

    Prepared by an instructor and curriculum specialists, this course of study was designed to meet the individual needs of the dropout and/or hard-core unemployed youth by providing them skill training, related information, and supportive services knowledge in machine tool operation. The achievement level of each student is determined at entry, and…

  5. The Improved Relevance Voxel Machine

    DEFF Research Database (Denmark)

    Ganz, Melanie; Sabuncu, Mert; Van Leemput, Koen

    The concept of sparse Bayesian learning has received much attention in the machine learning literature as a means of achieving parsimonious representations of features used in regression and classification. It is an important family of algorithms for sparse signal recovery and compressed sensing...

  6. Electrical discharge machining in dentistry.

    Science.gov (United States)

    Van Roekel, N B

    1992-01-01

    A brief history of electrical discharge machining (EDM) is given and the process is discussed. A description of the application of EDM for fabricating precision attachment removable partial dentures, fixed-removable implant prostheses, and titanium-ceramic crowns is presented. The advantages and disadvantages of the EDM process for the dental profession are evaluated. Although expensive, the procedure has merit.

  7. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study deve

  8. Molecular machines open cell membranes

    Science.gov (United States)

    García-López, Víctor; Chen, Fang; Nilewski, Lizanne G.; Duret, Guillaume; Aliyan, Amir; Kolomeisky, Anatoly B.; Robinson, Jacob T.; Wang, Gufeng; Pal, Robert; Tour, James M.

    2017-08-01

    Beyond the more common chemical delivery strategies, several physical techniques are used to open the lipid bilayers of cellular membranes. These include using electric and magnetic fields, temperature, ultrasound or light to introduce compounds into cells, to release molecular species from cells or to selectively induce programmed cell death (apoptosis) or uncontrolled cell death (necrosis). More recently, molecular motors and switches that can change their conformation in a controlled manner in response to external stimuli have been used to produce mechanical actions on tissue for biomedical applications. Here we show that molecular machines can drill through cellular bilayers using their molecular-scale actuation, specifically nanomechanical action. Upon physical adsorption of the molecular motors onto lipid bilayers and subsequent activation of the motors using ultraviolet light, holes are drilled in the cell membranes. We designed molecular motors and complementary experimental protocols that use nanomechanical action to induce the diffusion of chemical species out of synthetic vesicles, to enhance the diffusion of traceable molecular machines into and within live cells, to induce necrosis and to introduce chemical species into live cells. We also show that, by using molecular machines that bear short peptide addends, nanomechanical action can selectively target specific cell-surface recognition sites. Beyond the in vitro applications demonstrated here, we expect that molecular machines could also be used in vivo, especially as their design progresses to allow two-photon, near-infrared and radio-frequency activation.

  9. Design of Waste Shredder Machine

    Directory of Open Access Journals (Sweden)

    Asst. Prof. S.Nithyananth

    2014-03-01

    Full Text Available The conventional agro-waste disposal is a traditional and oldest method of waste disposal in which agriculture wastes are dumped as it is to degrade in a particular place for decomposing. As the wastes are dumped as such, it takes more time to degrade and it causes environmental pollution. The waste shredder machine aims to reduce the agro waste and convert it into useful nourishing fertilizer. It decreases the man work making the farm neat and clean. Also it reduces the heap amount of pollution, disease causing agro-wastes and produces a better fertilizer with vermin compost. The waste shredder machine is an attachment as like a ploughing attachment. In the shredder attachment input power and rigid support is provided by a KAMCO Tera-trac 4W tractor by means of PTO (power take off shaft and three point linkage. PTO shaft of the tractor acts as a basic power input and the three point linkage provide a rigid support to the machine. Various kinds of blades are used for chipping and powdering operations like sawing blades, rotatory blades, and triangular shape blades. The blades are mounted on the shaft. The power is transmitted to another shaft by means of pulley and belt. For designing waste shredder machine, Creo parametric 1.0 software is used.

  10. Machine Gun Liner Bond Strength

    Science.gov (United States)

    2007-08-01

    explosive bonding of pure tantalum, several tantalum alloys, and Stellite 25 (an alloy of cobalt, chrome , nickel, and tungsten) in a liner...Difficulties have been experienced in machining an explosively- clad tantalum alloy in an M242 Bushmaster barrel [6].) One disadvantage of Stellite 25 was

  11. How To Teach Common Characteristics of Machine Tools

    Science.gov (United States)

    Kazanas, H. C.

    1970-01-01

    Organizes machine tools and machine operations into commonalities in order to help the student visualize and distinguish the common characteristics which exist between machine tools and operations. (GR)

  12. CERN’s Rugby Club to play the Swiss Cup semi-finals: come and support the CERN team!

    CERN Document Server

    2011-01-01

    On Saturday 25 June, the CERN’s Rugby Club will be playing in the Swiss Cup semi-final against the Hermance Rugby Club. Although the CERN club has had a less than stellar year in the Swiss national first division, they earned a place in the Cup semi-final after beating Bern 30 – 0 and La Chaux-de-Fonds 38 – 7. The club last made it to the Swiss Cup semi-finals in 2002, where they lost to Hermance (the most successful Swiss rugby club, followed closely by CERN’s). Show your support for the CERN team and help them reach the Swiss Cup final by going to the 25 June match at 15.00 in the CERN pitch.  

  13. DRIVING VEHICLES SUBJECT TO A CUSTOMS RESTRICTIONS AGREEMENT WITH ORDINARY SWISS NUMBER PLATES

    CERN Multimedia

    Relations with the Host States Service

    2001-01-01

    The Swiss Permanent Mission to the International Organisations in Geneva has just confirmed to CERN that it is not necessary to hold a carte de légitimation or an attestation de fonctions issued by the Swiss Federal Department of Foreign Affairs to drive a vehicle subject to a customs restrictions agreement (engagement douanier), i.e. purchased or imported free of tax and customs duty, provided that the vehicle concerned is registered on ordinary Swiss number plates and not on diplomatic plates. We should like to remind you that the documents published by the Relations with the Host States Service since 1996 can be consulted on the Service's Web pages (http://www.cern.ch/relations/), which are updated as soon as new information is received from the Authorities of the Host States.

  14. ENET News July 2004 - Information on Swiss energy research; ENET News, Juli 2004, Nr. 58 deutsch

    Energy Technology Data Exchange (ETDEWEB)

    Wellstein, J.

    2004-07-01

    This edition of the Swiss Federal Office of Energy's Magazine (SFOE) with information on Swiss energy research presents a large selection of articles on various energy-relevant topics. These include research strategies, a discussion on oil reserves, technology transfer and innovation, Swiss biomass activities, winning power from the drinking water mains and the use of ambient heat. Further articles cover the topics of energy-efficiency and lighting in buildings, the use of batteries in vehicles, the increasing decentralisation of power generation and the use of supra-conducting current-limiters. Also, research on improved fuel use in nuclear plant and models for batch-processes in the processing industry are looked at. Further articles cover the wood fuels, photovoltaics and wind-energy areas as well as heat storage using geothermal techniques.

  15. ENET News November 2004 - Information on Swiss energy research; ENET News, November 2004, Nr. 59 deutsch

    Energy Technology Data Exchange (ETDEWEB)

    Wellstein, J.

    2004-07-01

    This last edition of the Swiss Federal Office of Energy (SFOE)'s magazine with information on Swiss energy research presents a large selection of articles on various energy-relevant topics. These include a review of energy research in Switzerland in general and the work of the Swiss Federal Energy Research Commission CORE in particular and a look at the basis for energy-economical perspectives in Switzerland. Further articles take a look at activities in the solar-chemical area, biomass and small-hydro projects, wind and geothermal energy as well as solar heating, photovoltaics and the use of ambient heat. Energy-efficiency in the buildings and traffic areas and combustion and combined heat and power are further topics covered. Nuclear energy and process engineering, fuel cells and activities in the international sector are examined. The publication is completed with a list of recent publications in the energy area.

  16. Swiss Federal Energy Research Commission - Annual report 2008; Eidgenoessische Energieforschungskommission CORE. Jahresbericht 2008

    Energy Technology Data Exchange (ETDEWEB)

    Maus, K.

    2009-07-01

    This annual report presents a review of the activities carried out by the Swiss Federal Energy Research Commission CORE in the year 2008. Main points of interest were the definition of a new CORE vision, a review of all research programmes, co-operation and co-ordination with public and private institutes, active consultancy, recommendations for further education and training, improved international information exchange and good communication with business, politics and the general public. The definition of a concept for Swiss energy research for the period 2012 to 2016 is mentioned. The annual report also reports on an internal visit made to various laboratories of the Swiss Federal Institute of Technology in Lausanne and the Energy Center in Zurich. The focussing of CORE activities on particular themes is discussed

  17. Design and Test of Wire-Scanners for SwissFEL

    CERN Document Server

    Orlandi, G L; Brands, H; Heimgartner, P; Ischebeck, R; Kammerer, A; Löhl, F; Lüscher, R; Mohanmurthy, P; Ozkan, C; Schlott, V; Schulz, L; Rippstein, B; Seiler, C; Trovati, S; Valitutti, P; Zimoch, D

    2016-01-01

    The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.8 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be discussed.

  18. [Bluetongue disease in Swiss sheep breeds: clinical signs after experimental infection with bluetongue virus serotype 8].

    Science.gov (United States)

    Worwa, G; Thür, B; Griot, C; Hofmann, M; MacLachlan, J N; Chaignat, V

    2008-10-01

    Clinical disease of bluetongue (BT) in sheep may differ depending on breed, age and immunity of infected sheep and may also vary between serotype and strain of BT virus (BTV). Since there are no data available on the susceptibility of Swiss sheep breeds for BT, we performed experimental infection of the 4 most common Swiss sheep breeds and the highly susceptible Poll Dorset sheep with the BTV serotype 8 (BTV-8) circulating in Northern Europe since 2006. Clinical signs were assessed regarding severity, localisation, progression and time point of their appearance. The results clearly show that the Swiss sheep breeds investigated were susceptible to BTV-8 infection. They developed moderate, BT-characteristic symptoms, which were similar to those observed in Poll Dorset sheep. Regardless of breed, the majority of infected animals showed fever, swelling of the head as well as erosions of the mouth and subcutaneous haemorrhages.

  19. ENET News November 2004 - Information on Swiss energy research; ENET News, November 2004, Nr. 59 deutsch

    Energy Technology Data Exchange (ETDEWEB)

    Wellstein, J.

    2004-07-01

    This last edition of the Swiss Federal Office of Energy (SFOE)'s magazine with information on Swiss energy research presents a large selection of articles on various energy-relevant topics. These include a review of energy research in Switzerland in general and the work of the Swiss Federal Energy Research Commission CORE in particular and a look at the basis for energy-economical perspectives in Switzerland. Further articles take a look at activities in the solar-chemical area, biomass and small-hydro projects, wind and geothermal energy as well as solar heating, photovoltaics and the use of ambient heat. Energy-efficiency in the buildings and traffic areas and combustion and combined heat and power are further topics covered. Nuclear energy and process engineering, fuel cells and activities in the international sector are examined. The publication is completed with a list of recent publications in the energy area.

  20. New Typewriter Displaces "Big Name" Machines.

    Science.gov (United States)

    School Business Affairs, 1983

    1983-01-01

    The Schoolwriter is a typewriter available at nearly half the price of competing machines. Schools in Minnesota and Maryland have purchased it for classroom machines and have had substantial savings. (MD)

  1. Mastering machine learning with scikit-learn

    CERN Document Server

    Hackeling, Gavin

    2014-01-01

    If you are a software developer who wants to learn how machine learning models work and how to apply them effectively, this book is for you. Familiarity with machine learning fundamentals and Python will be helpful, but is not essential.

  2. A Concrete Framework for Environment Machines

    DEFF Research Database (Denmark)

    Biernacka, Malgorzata; Danvy, Olivier

    2007-01-01

    calculus with explicit substitutions), we extend it minimally so that it can also express one-step reduction strategies, and we methodically derive a series of environment machines from the specification of two one-step reduction strategies for the lambda-calculus: normal order and applicative order....... The derivation extends Danvy and Nielsen’s refocusing-based construction of abstract machines with two new steps: one for coalescing two successive transitions into one, and the other for unfolding a closure into a term and an environment in the resulting abstract machine. The resulting environment machines...... include both the Krivine machine and the original version of Krivine’s machine, Felleisen et al.’s CEK machine, and Leroy’s Zinc abstract machine....

  3. Machine-Aided Indexing for NASA STI.

    Science.gov (United States)

    Wilson, John

    1987-01-01

    Describes the use of machine aided indexing as part of NASA's information systems. The discussion covers reasons for incorporating machine aided indexing, the lexical dictionary used, subject switching, natural language processing, benefits to the system, and possible future developments. (CLB)

  4. Novel Switched Flux Permanent Magnet Machine Topologies

    Institute of Scientific and Technical Information of China (English)

    诸自强

    2012-01-01

    This paper overviews various switched flux permanent magnet machines and their design and performance features,with particular emphasis on machine topologies with reduced magnet usage or without using magnet,as well as with variable flux capability.

  5. Setup Aid for Electrical-Discharge Machining

    Science.gov (United States)

    Lines, G.; Duca, J.

    1985-01-01

    Interlock assures that workpiece is correctly assembled in machining fixture. A Plunger in a Hollow Shaft actuates a switch, allowing a power supply to produce current for electrical-discharge machining. Plunger operates only when necessary parts are position.

  6. The Expansion of Swiss Criminal Jurisdiction in Light of International Law

    Directory of Open Access Journals (Sweden)

    Anna Petrig

    2013-09-01

    Full Text Available Over the last few decades, a global trend of extending the reach of domestic penal power can be observed, namely driven by the changing face of crime as it becomes increasingly transnational in nature. It is demonstrated in this article that the Swiss legislature has clearly followed this global trend of broadening the extraterritorial reach of domestic criminal law, most notably since the 1980s. It has acted with particular resolve in the last decade, adding jurisdictional bases to the Swiss Criminal Code by virtue of which Swiss criminal law can be applied to many instances of conduct taking place abroad. Certain offences – specified crimes against minors and female genital mutilation – have even been subjected to an absolute and unrestricted universality principle. The Swiss legislature is not indifferent to the problems that such an expansive approach to jurisdiction may create, notably in terms of conflicts of jurisdiction. Yet, the rules it adopted to temper the effects of applying Swiss criminal law to extraterritorial conduct only partially remedy the situation. This development in Swiss law begs the question whether such an expansive approach towards jurisdiction is permissible – or even encouraged or requested by international law. Hence, this article explores to what extent international law informs the reach of domestic penal power and concludes that international law is Janus-faced with regard to the question of the geographical scope of domestic criminal law. While some of its rules push for long-arm jurisdiction, others put limits on the domestic legislature’s endeavour to expand the reach of its domestic criminal law. In light of this, the idea of adopting, on an international level, general principles governing the definition of the scope of domestic prescriptive and adjudicative jurisdiction for transnational cases is tempting, albeit difficult to realize.

  7. The Expansion of Swiss Criminal Jurisdiction in Light of International Law

    Directory of Open Access Journals (Sweden)

    Anna Petrig

    2013-09-01

    Full Text Available Over the last few decades, a global trend of extending the reach of domestic penal power can be observed, namely driven by the changing face of crime as it becomes increasingly transnational in nature. It is demonstrated in this article that the Swiss legislature has clearly followed this global trend of broadening the extraterritorial reach of domestic criminal law, most notably since the 1980s. It has acted with particular resolve in the last decade, adding jurisdictional bases to the Swiss Criminal Code by virtue of which Swiss criminal law can be applied to many instances of conduct taking place abroad. Certain offences – specified crimes against minors and female genital mutilation – have even been subjected to an absolute and unrestricted universality principle. The Swiss legislature is not indifferent to the problems that such an expansive approach to jurisdiction may create, notably in terms of conflicts of jurisdiction. Yet, the rules it adopted to temper the effects of applying Swiss criminal law to extraterritorial conduct only partially remedy the situation. This development in Swiss law begs the question whether such an expansive approach towards jurisdiction is permissible – or even encouraged or requested by international law. Hence, this article explores to what extent international law informs the reach of domestic penal power and concludes that international law is Janus-faced with regard to the question of the geographical scope of domestic criminal law. While some of its rules push for long-arm jurisdiction, others put limits on the domestic legislature’s endeavour to expand the reach of its domestic criminal law. In light of this, the idea of adopting, on an international level, general principles governing the definition of the scope of domestic prescriptive and adjudicative jurisdiction for transnational cases is tempting, albeit difficult to realize.

  8. Present status and distribution of the Lynx in the Swiss Alps

    Directory of Open Access Journals (Sweden)

    Anja Molinari-Jobin

    2001-12-01

    Full Text Available Abstract To evaluate the population trend of lynx in the Swiss Alps, we analysed the spatial and numerical development of signs of presence found from 1995 to 1999 and compared them with previous years. Three sources of information on the presence of lynx are available: (1 reports of lynx killed or found dead; (2 records of livestock killed by lynx; (3 records of wild prey remains, tracks, scats, sightings, and vocalisations. We distinguished three levels of reliability: Quality 1 represent the hard facts, e.g. all reports of lynx killed or found dead, photographs of lynx as well as young orphaned lynx caught in the wild and taken into captivity. Quality 2 include all records of livestock killed, wild prey remains, tracks and scats reported by people who have attended special courses, e.g. mainly game wardens. Quality 3 are all wild prey remains and tracks reported by the general public as well as all sightings, scats and vocalisations, e.g. signs that cannot be verified. More than 1600 signs of presence were recorded in the Swiss Alps in this 5-year-period. A high number of quality 1 and 2 records showed that (1 the lynx population in the north-western Swiss Alps increased from 1994 to 1999, that (2 there is a moderate presence of the species in the central and south-western parts and (3 none or hardly any lynx are found in the eastern Alps of Switzerland. Based on a radio-telemetry study and the number of quality 2 data, we were able to estimate the number of lynx in the Swiss Alps at 70 individuals. To counterpart the uneven distribution of lynx in Switzerland, lynx are being translocated from the north-western Alps to the eastern Swiss Alps, as the expansion of the Swiss lynx population is crucial for the conservation of the lynx in the whole Alps.

  9. Cutting tool materials for high speed machining

    Institute of Scientific and Technical Information of China (English)

    LIU Zhanqiang; AI Xing

    2005-01-01

    High speed machining (HSM) is one of the emerging cutting processes, which is machining at a speed significantlyhigher than the speed commonly in use on the shop floor. In the last twenty years, high speed machining has received great attentions as a technological solution for high productivity in manufacturing. This article reviews the developments of tool materials in high speed machining operations, and the properties, applications and prospective developments of tool materials in HSM are also presented.

  10. Design of equipment for training machine tools

    Directory of Open Access Journals (Sweden)

    Císar Miroslav

    2017-01-01

    Full Text Available The article proposes multiple devices designed to be used with training machine tools EMCO Concept series. Design was focused to enchant educational potential of training machine tools located in the laboratory of CNC programing, department of automation and production systems, Faculty of mechanical engineering, University of Zilina. The described device allows monitoring of machine tool, to measure tool offset and dimension, to use alternative ways of clamping, and to create video of machining.

  11. Calibration of a Parallel Kinematic Machine Tool

    Institute of Scientific and Technical Information of China (English)

    HE Xiao-mei; DING Hong-sheng; FU Tie; XIE Dian-huang; XU Jin-zhong; LI Hua-feng; LIU Hui-lin

    2006-01-01

    A calibration method is presented to enhance the static accuracy of a parallel kinematic machine tool by using a coordinate measuring machine and a laser tracker. According to the established calibration model and the calibration experiment, the factual 42 kinematic parameters of BKX-I parallel kinematic machine tool are obtained. By circular tests the comparison is made between the calibrated and the uncalibrated parameters and shows that there is 80% improvement in accuracy of this machine tool.

  12. FORMING AND PRECISION MACHINING TO NANOMATERIALS LUMP

    Institute of Scientific and Technical Information of China (English)

    Zhan Jie; Zhang Jin; Chen Bingkui; Chen Xiaoan

    2004-01-01

    The technology of forming and machining lump nano-materials has been investigated. Grinding, abrasive machining test has been conducted to Fe, Co, Ni and Al lump nano-materials. Experiments have been done to measure grinding force, grinding thermal, machining roughness and micro-hardness. Image analysis is carried out by metallographic and scanning tunnel microscopic microscope. Researches provide the basis data for forming and machining lump nano-materials.

  13. Permutation parity machines for neural cryptography.

    Science.gov (United States)

    Reyes, Oscar Mauricio; Zimmermann, Karl-Heinz

    2010-06-01

    Recently, synchronization was proved for permutation parity machines, multilayer feed-forward neural networks proposed as a binary variant of the tree parity machines. This ability was already used in the case of tree parity machines to introduce a key-exchange protocol. In this paper, a protocol based on permutation parity machines is proposed and its performance against common attacks (simple, geometric, majority and genetic) is studied.

  14. Laser-assisted machining of difficult-to-machine materials

    Energy Technology Data Exchange (ETDEWEB)

    Incropera, F.P.; Rozzi, J.C.; Pfefferkorn, F.E.; Lei, S.; Shin, Y.C.

    1999-07-01

    Laser-assisted machining (LAM) is a hybrid process for which a difficult-to-machine material, such as a ceramic or super alloy, is irradiated by a laser source prior to material removal by a cutting tool. The process has the potential to significantly increase material removal rates, as well as to improve the geometry and properties of the finished work piece. Features and limitations of theoretical and experimental procedures for determining the transient thermal response of a work piece during LAM are described, and representative results are presented for laser-assisted turning of sintered silicon nitride. Significant physical trends are revealed by the calculations, as are guidelines for the selection of appropriate operating conditions.

  15. How would Swiss consumers decide if they had freedom of choice?

    DEFF Research Database (Denmark)

    Aerni, P.; Scholderer, Joachim; Ermen, J.

    2011-01-01

    In 2005, the Swiss expressed their negative attitude towards genetic engineering in agriculture by voting in favor of a ban to use genetically modified (GM) crops in domestic agriculture. At the same time, certain GM food products remain approved but are not on offer since retailers assume...... that consumers would shun labeled GM food. In our study we tested this claim by conducting a large-scale field study with Swiss consumers. In our experimental design, three clearly labeled types of corn bread were offered at five different market stands across the French and German-speaking part of Switzerland...

  16. Swiss Photovoltaics Programme 2008 edition - Summary report, annual project abstracts for 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-04-15

    This comprehensive, illustrated report issued by the Swiss Federal Office of Energy (SFOE) presents an overview of activities in 2007 within the framework of the Swiss Photovoltaics Research Programme. Work completed in 2007 and the results achieved in the areas of cell technology, solar modules and building integration, electrical systems technology, supplementary projects and studies are summarised. National and international co-operation is examined. New, current and completed Pilot and Demonstration projects are reported on as are the prospects for the year 2008. The report is completed with lists of research and development as well as pilot and demonstration projects.

  17. Antidiarrhoeal efficacy ofMangifera indica seed kernel on Swiss albino mice

    Institute of Scientific and Technical Information of China (English)

    Rajan S; Suganya H; Thirunalasundari T; Jeeva S

    2012-01-01

    Objective:To examine the antidiarrhoeal activity of alcoholic and aqueous seed kernel extract of Mangifera indica (M. indica) on castor oil-induced diarrhoeal activity inSwiss albino mice.Methods:Mango seed kernels were processed and extracted using alcohol and water. Antidiarrhoeal activity of the extracts were assessed using intestinal motility and faecal score methods.Results:Aqueous and alcoholic extracts ofM. indica significantly reduced intestinal motility and faecal score inSwiss albino mice.Conclusions:The present study shows the traditional claim on the use of M. indica seed kernel for treating diarrhoea inSouthern parts of India.

  18. Protection for structures in extreme earthquakes: Full Base Isolation (3-D) by the Swiss Seismafloat System

    Energy Technology Data Exchange (ETDEWEB)

    Staudacher, K.

    1985-02-01

    Full Base Isolation (FBI, 3-D), an antiseismic concept for structures, adds vertical flexibility to horizontal base isolation (HBI, 2-D). Extensive experimental testing at the Swiss Federal Institute of Technology and the University of California, Berkeley, has shown FBI to be a practicable way to reach the final goal of earthquake protection, i.e. elastic behavior of the structural frame in extreme earthquakes. Swiss engineers pioneered base isolation by the construction of the Pestalozzi School at Skopje in 1968. Further development has made Integral Earthquake Protection possible for structures and their contents. (orig.).

  19. Mini lathe machine converted to CNC

    Directory of Open Access Journals (Sweden)

    Alexandru Morar

    2012-06-01

    Full Text Available This paper presents the adaptation of a mechanical mini-lathing machine to a computerized numerical control (CNC lathing machine. This machine is composed of a ASIST mini-lathe and a two-degrees-of-freedom XZ stage designed specifically for this application. The whole system is controlled from a PC using adequate CNC control software.

  20. Gold Rush to China for Italian Machines

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Italy exported two billion worth of textile machines in 2006, 46% of which went to Asia.China paid 365 million Euro to become the largest importer of ltaly’s machines in Aisa.China, a country that sustains Italian interest in coming,is the country where the investment in textile machines is growing...