Association of Grade Configuration with School Climate for 7th and 8th Grade Students

Science.gov (United States)

Malone, Marisa; Cornell, Dewey; Shukla, Kathan

2017-01-01

Educational authorities have questioned whether middle schools provide the best school climate for 7th and 8th grade students, and proposed that other grade configurations such as K-8th grade schools may provide a better learning environment. The purpose of this study was to compare 7th and 8th grade students' perceptions of 4 key features of…

Radiation-induced decrease of CD8+ dendritic cells contributes to Th1/Th2 shift.

Science.gov (United States)

Liu, Hu; Li, Bailong; Jia, Xiaojing; Ma, Yan; Gu, Yifeng; Zhang, Pei; Wei, Qun; Cai, Jianming; Cui, Jianguo; Gao, Fu; Yang, Yanyong

2017-05-01

Exposure to ionizing radiation (IR) often reduce the helper T (Th) 1 like function, resulting in a Th1/Th2 imbalance, which could affect the efficacy of cancer radiotherapy. As the most potent antigen presenting cells, dendritic cells (DC) can be divided into several subsets with specialized function. However, there is no literature covering the changes of DC subsets and their roles in immune regulation in response to IR. In the present study, we were aimed to investigate the changes of DC subsets after IR and its relationship with Th1/Th2 immunity. We found a significant decrease of BDCA3+DC in the blood of patients treated with radiotherapy. CD8+DC, a mouse equivalent of human BDCA3+DC, was also found decreased in mice spleen, peripheral blood and lymph node tissues after irradiation. As CD8+DC mainly induce Th1 immunity, we tested the changes of Th1/Th2 response and found that IR caused a repression of Th1 immunity, indicating a possible role of CD8+DC in radiation-induced Th1/Th2 imbalance. We also found that a CD8+DC-inducing cytokine, Fms-like tyrosine kinase 3 ligand (FLT3 ligand), restored CD8+DC and reversed Th1/Th2 shift. And then we found that bone marrow cells from irradiated mice differentiated into less CD8+DC, which was also protected by FLT3 ligand. In conclusion, our data showed that IR induced a decrease of CD8+DC and Th1/Th2 shift, which was reversed by Flt3 ligand treatment, suggesting a novel mechanism for radiation-induced immunosuppression. Copyright © 2017. Published by Elsevier B.V.

Dancetime! 500 Years of Social Dance. Volume I: 15th-19th Centuries. [Videotape].

Science.gov (United States)

Teten, Carol

This VHS videotape recording is the first in a two-volume series that presents 500 years of social dance, music, and fashion. It focuses on the 15th-19th centuries, including Renaissance nobility, Baroque extravagance, Regency refinement, and Victorian romanticism. Each era reflects the changing relationships between men and women through the…

Machines and Signs A History of the Drawing of Machines

CERN Document Server

Rovida, Edoardo

2013-01-01

This volume addresses the cultural, technical and ethical motivations of the history of drawing of machines and its developments step by step. First it treats drawings without any technical character; then the Renaissance with its new forms of drawing; the 18th century, with orthographic projections, immediately used by industry; the 19th century, including the applications of drawing in industry; and the 20th century, with the standardization institutions and the use of the computer. The role of historical drawings and archives in modern design is also examined. This book is of value to all those who are interested in technical drawing, either from an artistic, from a design, or from an engineering point of view.

Highlights of the 8th International Veterinary Immunology Symposium

Science.gov (United States)

Veterinary immunologists have expanded understanding of the immune systems for our companion animals and developed new vaccines and therapeutics. This manuscript summarizes the highlights of the 8th International Veterinary Immunology Symposium (8 th IVIS) held August 15th-19th, 2007, in Ouro Preto,...

The Machine as Art (in the 20th Century: An Introduction

Directory of Open Access Journals (Sweden)

Juliette Bessette

2018-01-01

Full Text Available The machine, over the course of the 20th century, progressively integrated itself into all fields of human activity, including artistic creation; and indeed, with the first decades of that century having established a surprisingly vital and wide-ranging series of perspectives on the relationship between art and the machine, certain artists in the wake of the Second World War no longer felt compelled to treat the machine as a mere theme or source of inspiration: the machine itself becomes art—unless it is art which seeks to become mechanical? The artist mutates into “artist-engineer”; and this transition, resonating within a specific historical context, leads not only to a questioning of the nature of the work itself, but also to a broader questioning which places us within the realm of anthropology: what is this art telling us about the actual conditions of contemporary human society, and what is it telling us about the future to which we aspire? It is the goal of this special issue of Arts to stimulate an historically conscious, protean, and global (rethinking of the cultural relationship between man and machine; and to this end, we welcome contributions falling anywhere within the nearly infinite spectrum represented by the prismatic period during the middle of the last century in which the machine became a legitimate artistic medium.

16th International Conference on Hybrid Intelligent Systems and the 8th World Congress on Nature and Biologically Inspired Computing

CERN Document Server

Haqiq, Abdelkrim; Alimi, Adel; Mezzour, Ghita; Rokbani, Nizar; Muda, Azah

2017-01-01

This book presents the latest research in hybrid intelligent systems. It includes 57 carefully selected papers from the 16th International Conference on Hybrid Intelligent Systems (HIS 2016) and the 8th World Congress on Nature and Biologically Inspired Computing (NaBIC 2016), held on November 21–23, 2016 in Marrakech, Morocco. HIS - NaBIC 2016 was jointly organized by the Machine Intelligence Research Labs (MIR Labs), USA; Hassan 1st University, Settat, Morocco and University of Sfax, Tunisia. Hybridization of intelligent systems is a promising research field in modern artificial/computational intelligence and is concerned with the development of the next generation of intelligent systems. The conference’s main aim is to inspire further exploration of the intriguing potential of hybrid intelligent systems and bio-inspired computing. As such, the book is a valuable resource for practicing engineers /scientists and researchers working in the field of computational intelligence and artificial intelligence.

The 9th international conference on computing and information technology

CERN Document Server

Unger, Herwig; Boonkrong, Sirapat; IC2IT2013

2013-01-01

This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.  

Hekla Volcano, Iceland, in the 20th Century: Lava Volumes, Production Rates, and Effusion Rates

Science.gov (United States)

Pedersen, G. B. M.; Belart, J. M. C.; Magnússon, E.; Vilmundardóttir, O. K.; Kizel, F.; Sigurmundsson, F. S.; Gísladóttir, G.; Benediktsson, J. A.

2018-02-01

Lava flow thicknesses, volumes, and effusion rates provide essential information for understanding the behavior of eruptions and their associated deformation signals. Preeruption and posteruption elevation models were generated from historical stereo photographs to produce the lava flow thickness maps for the last five eruptions at Hekla volcano, Iceland. These results provide precise estimation of lava bulk volumes: V1947-1948 = 0.742 ± 0.138 km3, V1970 = 0.205 ± 0.012 km3, V1980-1981 = 0.169 ± 0.016 km3, V1991 = 0.241 ± 0.019 km3, and V2000 = 0.095 ± 0.005 km3 and reveal variable production rate through the 20th century. These new volumes improve the linear correlation between erupted volume and coeruption tilt change, indicating that tilt may be used to determine eruption volume. During eruptions the active vents migrate 325-480 m downhill, suggesting rough excess pressures of 8-12 MPa and that the gradient of this excess pressure increases from 0.4 to 11 Pa s-1 during the 20th century. We suggest that this is related to increased resistance along the eruptive conduit.

Quadrennial Review of Military Compensation (6th). Executive Summary. Volumes 1 thru 1C, and Volumes 2 thru 3

Science.gov (United States)

1988-08-01

CIVILIAN EARNINGS PROFILE: ENLISTED SOURCE: SYLLOGISTICS 2-24 6th ORNC Esport -Volum 11 participation and higher than that of civilian counterparts in...7-26 6th QRNC esport - Volume I m Eliminate the existing 80 percent limiltation onmeai/entertairment deductions incurred in connection with the

5th IFToMM Symposium on the History of Machines and Mechanisms

CERN Document Server

Ceccarelli, Marco

2016-01-01

This volume includes contributions presented at the Fifth IFToMM Symposium on the History of Machines and Mechanisms, held at Universidad Autonoma de Queretaro, Santiago de Queretaro, QRO, Mexico, in June 2016. It contains work on theories and facts concerning mechanisms and machines from antiquity to current times as viewed in the present day. Topics include modern reviews of past works; people, history, and their works; direct memories of the recent past; historic development theories; the history of the design of machines and mechanisms; developments of mechanical design and automation; the historic development of teaching; the history of schools of engineering and the education of engineers. .

JANNAF 18th Propulsion Systems Hazards Subcommittee Meeting. Volume 1

Science.gov (United States)

Cocchiaro, James E. (Editor); Gannaway, Mary T. (Editor)

1999-01-01

This volume, the first of two volumes is a compilation of 18 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 18th Propulsion Systems Hazards Subcommittee (PSHS) meeting held jointly with the 36th Combustion Subcommittee (CS) and 24th Airbreathing Propulsion Subcommittee (APS) meetings. The meeting was held 18-21 October 1999 at NASA Kennedy Space Center and The DoubleTree Oceanfront Hotel, Cocoa Beach, Florida. Topics covered at the PSHS meeting include: shaped charge jet and kinetic energy penetrator impact vulnerability of gun propellants; thermal decomposition and cookoff behavior of energetic materials; violent reaction; detonation phenomena of solid energetic materials subjected to shock and impact stimuli; and hazard classification, insensitive munitions, and propulsion systems safety.

Usage of Metaphors in Turkish Language Textbooks Used at 6th, 7th and 8th Grades

Directory of Open Access Journals (Sweden)

Esra Karakas

2013-05-01

Full Text Available The word “Metaphor”, which is equivalent to the terms “istiare” in Arabic or “eğretileme, transfer of idioms” in Turkish, consists of two parts. “Meta” means “later” or “with” whereas “phora” means transfer or conveyance of word. In the recent years metaphor has been the subject and focuses of several studies, and is used to express a concept or situation with another concept or situation. Starting from 1980s, researchers have studied metaphor and concurrently they examined usage of language. It is now been believed that using metaphors is appropriate in order to be able to understand any phenomenon. Metaphor can be used in encouraging learning and improving creative thinking; it can also provide hints for in-the-class methods, techniques and situations. In this context, metaphors are also essential components for Turkish language textbooks. The purpose of this study is to detect the uses of metaphor in Turkish language textbooks of 6th, 7th and 8th grade students. For this purpose the Turkish language textbooks of 6th, 7th and 8th grade students prepared by the Ministry of National Education (MEB were examined with “content analysis method. Considering that metaphors are effective in learning and improving creative thinking, the importance of using metaphors in textbooks is beyond discussion. The data collected throughout this study show that the metaphors detected in 7th and 8th grade Turkish language textbooks are less in number compared to those found in 6th grade Turkish language textbooks. Another important conclusion is that distribution of metaphors among units is not even. The conclusion of the study is that Turkish language textbooks are not prepared in a sensitive and choosy manner with this respect.

JANNAF 28th Propellant Development and Characterization Subcommittee and 17th Safety and Environmental Protection Subcommittee Joint Meeting. Volume 1

Science.gov (United States)

Cocchiaro, James E. (Editor); Mulder, Edwin J. (Editor); Gomez-Knight, Sylvia J. (Editor)

1999-01-01

This volume contains 37 unclassified/unlimited-distribution technical papers that were presented at the JANNAF 28th Propellant Development & Characterization Subcommittee (PDCS) and 17th Safety & Environmental Protection Subcommittee (S&EPS) Joint Meeting, held 26-30 April 1999 at the Town & Country Hotel and the Naval Submarine Base, San Diego, California. Volume II contains 29 unclassified/limited-distribution papers that were presented at the 28th PDCS and 17th S&EPS Joint Meeting. Volume III contains a classified paper that was presented at the 28th PDCS Meeting on 27 April 1999. Topics covered in PDCS sessions include: solid propellant rheology; solid propellant surveillance and aging; propellant process engineering; new solid propellant ingredients and formulation development; reduced toxicity liquid propellants; characterization of hypergolic propellants; and solid propellant chemical analysis methods. Topics covered in S&EPS sessions include: space launch range safety; liquid propellant hazards; vapor detection methods for toxic propellant vapors and other hazardous gases; toxicity of propellants, ingredients, and propellant combustion products; personal protective equipment for toxic liquid propellants; and demilitarization/treatment of energetic material wastes.

Comparison of Values in 5th, 6th, 7th and 8th Grade Primary Education Music Class Students'? Workbooks According to Rokeach?s and Akbas's Value Classifications

Science.gov (United States)

Çakirer, H. Serdar

2014-01-01

The aim of the present study is to compare the values in the songs of 5th, 6th, 7th and 8th grade primary education music classes students? workbooks according to the value categorizations proposed by Rockeach and Akbas and which values among the categories mentioned are taught to the students in the 5th, 6th, 7th and 8th grade primary education…

Condition of physical health of pupils of the 7th-8th classes of the comprehensive school

Directory of Open Access Journals (Sweden)

Margarita Mameshina

2016-10-01

Full Text Available Purpose: to investigate the level of physical health of pupils of the 7th-8th classes. Material & Methods: pupils of the 7th-8th classes of the comprehensive school No. 150 of Kharkov participated in the research. The following methods were used: theoretical analysis and generalization of scientific literature, method of express-assessment of physical health, mathematical statistics. Results: the comparative analysis of the obtained data in age aspect and on gender sign is carried out; the general assessment of the level of physical health of pupils of the 7th-8th classes is defined. Conclusions: the insignificant prevalence of indicators of the separate components of health of boys over the data of girls and, generally, the reliable improvement of indicators of pupils with age are established; the "average" level of physical health of pupils of the 7th classes and "below the average" level of pupils of the 8th classes are determined.

SPECIAL ISSUE VETERINARY IMMUNOLOGY IMMUNOPATHOLOGY: PROCEEDINGS 8TH INTERNATIONAL VETERINARY IMMUNOLOGY SYMPOSIUM

Science.gov (United States)

This is the Special Issue of Vet. Immunol. Immunopathol. that summarizes the 8th International Veterinary Immunology Symposium (8 th IVIS) held August 15th-19th, 2007, in Ouro Preto, Brazil. The 8 th IVIS highlighted the importance of veterinary immunology for animal health, vaccinology, reproducti...

8th International Conference on Information Science and Applications

CERN Document Server

Joukov, Nikolai

2017-01-01

This book contains selected papers from the 8th International Conference on Information Science and Applications (ICISA 2017) and provides a snapshot of the latest issues encountered in technical convergence and convergences of security technology. It explores how information science is core to most current research, industrial and commercial activities and consists of contributions covering topics including Ubiquitous Computing, Networks and Information Systems, Multimedia and Visualization, Middleware and Operating Systems, Security and Privacy, Data Mining and Artificial Intelligence, Software Engineering, and Web Technology. The proceedings introduce the most recent information technology and ideas, applications and problems related to technology convergence, illustrated through case studies, and reviews converging existing security techniques. Through this volume, readers will gain an understanding of the current state-of-the-art information strategies and technologies of convergence security.The intende...

Peculiarities of Motor Abilities Development in 7th-8th-Graders

Directory of Open Access Journals (Sweden)

Ю. В. Мороз

2015-09-01

Full Text Available The pupose of the research is to define the peculiarities of motor abilities development in children of middle-school age. Research methods: theoretical analysis and collation of scientific and methodological literature; pedagogical testing; methods of mathematical statistics. To determine the effectiveness of realization of the developmental task of the physical education process at the beginning of the school year (in October 2014 and in March 2015, we tested the level of development of physical qualities in the 7th- and 8th-graders, 25 and 25 graders respectively, 13 of which in each class were boys and 12 — girls. Research results. The analysis of the materials shows that during the school year, the boys of the 7th grade showed reliably increased performance in standing long jumps (speed and strength qualities — 1.97%, raising the body from the lying position (strength — 26.46%, bent suspension (strength — 13.45%. The indicators have insignificantly (unreliably increased in the shuttle run 3×10 m (agility — 6.09%, and in body bending from the sitting position (flexibility — 6.25%. The girls showed reliably increased performance in the level of readiness: flexibility — 12%, strength — 12.09%, speed-strength qualities — 5.27%, agility — 7.77%. The analysis of the materials shows that during the school year the 8th-graders (boys reliably increased their physical readiness in speed-strength qualities — 0.8%, strength — 15.7%. The indicators of agility increased unreliably — 2.7%, as well as those of flexibility — 8%. The 8th‑graders (girls reliably improved their indicators in standing long jumps — 2.1%, in bent suspension — 18.8%, raising the body from the lying position in 30 seconds — 17.4%, body bending from the sitting position — 12 5%. The indicators agility improved unreliably — 3.4%. Conclusions. The data obtained are important in solving the pedagogical problems of schoolers’ physical education

JANNAF 17th Propulsion Systems Hazards Subcommittee Meeting. Volume 1

Science.gov (United States)

Cocchiaro, James E. (Editor); Gannaway, Mary T. (Editor); Rognan, Melanie (Editor)

1998-01-01

Volume 1, the first of two volumes is a compilation of 16 unclassified/unlimited technical papers presented at the 17th meeting of the Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Systems Hazards Subcommittee (PSHS) held jointly with the 35th Combustion Subcommittee (CS) and Airbreathing Propulsion Subcommittee (APS). The meeting was held on 7 - 11 December 1998 at Raytheon Systems Company and the Marriott Hotel, Tucson, AZ. Topics covered include projectile and shaped charge jet impact vulnerability of munitions; thermal decomposition and cookoff behavior of energetic materials; damage and hot spot initiation mechanisms with energetic materials; detonation phenomena of solid energetic materials; and hazard classification, insensitive munitions, and propulsion systems safety.

8th International Conference on Partial Least Squares and Related Methods

CERN Document Server

Vinzi, Vincenzo; Russolillo, Giorgio; Saporta, Gilbert; Trinchera, Laura

2016-01-01

This volume presents state of the art theories, new developments, and important applications of Partial Least Square (PLS) methods. The text begins with the invited communications of current leaders in the field who cover the history of PLS, an overview of methodological issues, and recent advances in regression and multi-block approaches. The rest of the volume comprises selected, reviewed contributions from the 8th International Conference on Partial Least Squares and Related Methods held in Paris, France, on 26-28 May, 2014. They are organized in four coherent sections: 1) new developments in genomics and brain imaging, 2) new and alternative methods for multi-table and path analysis, 3) advances in partial least square regression (PLSR), and 4) partial least square path modeling (PLS-PM) breakthroughs and applications. PLS methods are very versatile methods that are now used in areas as diverse as engineering, life science, sociology, psychology, brain imaging, genomics, and business among both academics ...

8th International Conference on Multi-Objective and Goal Programming

CERN Document Server

Tamiz, Mehrdad; Ries, Jana

2010-01-01

This volume shows the state-of-the-art in both theoretical development and application of multiple objective and goal programming. Applications from the fields of supply chain management, financial portfolio selection, financial risk management, insurance, medical imaging, sustainability, nurse scheduling, project management, water resource management, and the interface with data envelopment analysis give a good reflection of current usage. A pleasing variety of techniques are used including models with fuzzy, group-decision, stochastic, interactive, and binary aspects. Additionally, two papers from the upcoming area of multi-objective evolutionary algorithms are included. The book is based on the papers of the 8th International Conference on Multi-Objective and Goal Programming (MOPGP08) which was held in Portsmouth, UK, in September 2008.

Proceedings of JAEA-KPSI 8th symposium on advanced photon research

International Nuclear Information System (INIS)

2008-08-01

JAEA-KPSI-APRC 8th Symposium on Advanced Photon Research was held at Kansai Photon Research Institute, Japan Atomic Energy Agency (JAEA-KPSI) in Kizu, Kyoto on June 4th - 5th, 2007. This report consists of contributed papers for the speeches and poster presentations in JAEA-KPSI-APRC 8th Symposium. The 33 of the presented papers are indexed individually. (J.P.N.)

Computational science - ICCS 2008: 8th international conference, Kraków, Poland, June 23-25, 2008: Proceedings, part II

NARCIS (Netherlands)

Bubak, M.; van Albada, G.D.; Dongarra, J.; Sloot, P.M.A.

2008-01-01

The three-volume set LNCS 5101-5103 constitutes the refereed proceedings of the 8th International Conference on Computational Science, ICCS 2008, held in Krakow, Poland in June 2008. The 167 revised papers of the main conference track presented together with the abstracts of 7 keynote talks and the

Representational Machines

DEFF Research Database (Denmark)

Photography not only represents space. Space is produced photographically. Since its inception in the 19th century, photography has brought to light a vast array of represented subjects. Always situated in some spatial order, photographic representations have been operatively underpinned by social...... to the enterprises of the medium. This is the subject of Representational Machines: How photography enlists the workings of institutional technologies in search of establishing new iconic and social spaces. Together, the contributions to this edited volume span historical epochs, social environments, technological...... possibilities, and genre distinctions. Presenting several distinct ways of producing space photographically, this book opens a new and important field of inquiry for photography research....

8th International Conference on Genetic and Evolutionary Computing

CERN Document Server

Yang, Chin-Yu; Lin, Chun-Wei; Pan, Jeng-Shyang; Snasel, Vaclav; Abraham, Ajith

2015-01-01

This volume of Advances in Intelligent Systems and Computing contains accepted papers presented at ICGEC 2014, the 8th International Conference on Genetic and Evolutionary Computing. The conference this year was technically co-sponsored by Nanchang Institute of Technology in China, Kaohsiung University of Applied Science in Taiwan, and VSB-Technical University of Ostrava. ICGEC 2014 is held from 18-20 October 2014 in Nanchang, China. Nanchang is one of is the capital of Jiangxi Province in southeastern China, located in the north-central portion of the province. As it is bounded on the west by the Jiuling Mountains, and on the east by Poyang Lake, it is famous for its scenery, rich history and cultural sites. Because of its central location relative to the Yangtze and Pearl River Delta regions, it is a major railroad hub in Southern China. The conference is intended as an international forum for the researchers and professionals in all areas of genetic and evolutionary computing.

Investigation of roughing machining simulation by using visual basic programming in NX CAM system

Science.gov (United States)

Hafiz Mohamad, Mohamad; Nafis Osman Zahid, Muhammed

2018-03-01

This paper outlines a simulation study to investigate the characteristic of roughing machining simulation in 4th axis milling processes by utilizing visual basic programming in NX CAM systems. The selection and optimization of cutting orientation in rough milling operation is critical in 4th axis machining. The main purpose of roughing operation is to approximately shape the machined parts into finished form by removing the bulk of material from workpieces. In this paper, the simulations are executed by manipulating a set of different cutting orientation to generate estimated volume removed from the machine parts. The cutting orientation with high volume removal is denoted as an optimum value and chosen to execute a roughing operation. In order to run the simulation, customized software is developed to assist the routines. Operations build-up instructions in NX CAM interface are translated into programming codes via advanced tool available in the Visual Basic Studio. The codes is customized and equipped with decision making tools to run and control the simulations. It permits the integration with any independent program files to execute specific operations. This paper aims to discuss about the simulation program and identifies optimum cutting orientations for roughing processes. The output of this study will broaden up the simulation routines performed in NX CAM systems.

Transactions of the 8th International Conference on Structure Mechanics in Reactor Technology

International Nuclear Information System (INIS)

Browzin, B.S.

1985-06-01

These Transactions of the JK-panel session include preprints of papers or abstracts which are listed in Volume A, ''Introduction, General Contents, Authors Index,'' Proceedings of the 8th International Conference on Structural Mechanics in Reactor Technology. These papers represent the body of the JK-panel session, ''Status of Research in Structural and Mechanical Engineering for Nuclear Power Plants,'' sponsored by the US Nuclear Regulatory Commission. Additional papers are expected at this session, which will be available at the session. The purpose of publishing these Transactions is to inform the participants of the JK-panel session in advance on the papers to be presented and discussed at the session

Foods Sold in School Vending Machines are Associated with Overall Student Dietary Intake

Science.gov (United States)

Rovner, Alisha J.; Nansel, Tonja R.; Wang, Jing; Iannotti, Ronald J.

2010-01-01

Purpose To examine the association between foods sold in school vending machines and students’ dietary behaviors. Methods The 2005-2006 US Health Behavior in School Aged Children (HBSC) survey was administered to 6th to 10th graders and school administrators. Students’ dietary intake was estimated with a brief food frequency measure. Administrators completed questions about foods sold in vending machines. For each food intake behavior, a multilevel regression analysis modeled students (level 1) nested within schools (level 2), with the corresponding food sold in vending machines as the main predictor. Control variables included gender, grade, family affluence and school poverty. Analyses were conducted separately for 6th to 8th and 9th to 10th grades. Results Eighty-three percent of schools (152 schools, 5,930 students) had vending machines which primarily sold foods of minimal nutritional values (soft drinks, chips and sweets). In younger grades, availability of fruits/vegetables and chocolate/sweets was positively related to the corresponding food intake, with vending machine content and school poverty explaining 70.6% of between-school variation in fruit/vegetable consumption, and 71.7% in sweets consumption. In older grades, there was no significant effect of foods available in vending machines on reported consumption of those foods. Conclusions Vending machines are widely available in US public schools. In younger grades, school vending machines were related to students’ diets positively or negatively, depending on what was sold in them. Schools are in a powerful position to influence children’s diets; therefore attention to foods sold in them is necessary in order to try to improve children’s diets. PMID:21185519

Machine tool structures

CERN Document Server

Koenigsberger, F

1970-01-01

Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

Nuclear regulatory legislation, 104th Congress, Volume 1, No. 4

International Nuclear Information System (INIS)

1997-12-01

This document is the first of two volumes compiling statutes and material pertaining to nuclear regulatory legislation through the 104th Congress, 2nd Session. It is intended for use as a U.S. Nuclear Regulatory Commission (NRC) internal resource document. Legislative information reproduced in this document includes portions of the Atomic Energy Act, Energy Reorganization Act, Low-Level Radioactive Waste Policy Amendments Act, and Nuclear Waste Policy Act. Other information included in this volume pertains to NRC user fees, NRC authorizations, the Inspector General Act, and the Administrative Procedure Act

Nuclear regulatory legislation, 104th Congress, Volume 1, No. 4

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This document is the first of two volumes compiling statutes and material pertaining to nuclear regulatory legislation through the 104th Congress, 2nd Session. It is intended for use as a U.S. Nuclear Regulatory Commission (NRC) internal resource document. Legislative information reproduced in this document includes portions of the Atomic Energy Act, Energy Reorganization Act, Low-Level Radioactive Waste Policy Amendments Act, and Nuclear Waste Policy Act. Other information included in this volume pertains to NRC user fees, NRC authorizations, the Inspector General Act, and the Administrative Procedure Act.

Food sold in school vending machines is associated with overall student dietary intake.

Science.gov (United States)

Rovner, Alisha J; Nansel, Tonja R; Wang, Jing; Iannotti, Ronald J

2011-01-01

To examine the association between food sold in school vending machines and the dietary behaviors of students. The 2005-2006 U.S. Health Behavior in School-aged Children survey was administered to 6th to 10th graders and school administrators. Dietary intake in students was estimated with a brief food frequency measure. School administrators completed questions regarding food sold in vending machines. For each food intake behavior, a multilevel regression analysis modeled students (level 1) nested within schools (level 2), with the corresponding food sold in vending machines as the main predictor. Control variables included gender, grade, family affluence, and school poverty index. Analyses were conducted separately for 6th to 8th and 9th-10th grades. In all, 83% of the schools (152 schools; 5,930 students) had vending machines that primarily sold food of minimal nutritional values (soft drinks, chips, and sweets). In younger grades, availability of fruit and/or vegetables and chocolate and/or sweets was positively related to the corresponding food intake, with vending machine content and school poverty index providing an explanation for 70.6% of between-school variation in fruit and/or vegetable consumption and 71.7% in sweets consumption. Among the older grades, there was no significant effect of food available in vending machines on reported consumption of those food. Vending machines are widely available in public schools in the United States. In younger grades, school vending machines were either positively or negatively related to the diets of the students, depending on what was sold in them. Schools are in a powerful position to influence the diets of children; therefore, attention to the food sold at school is necessary to try to improve their diets. Copyright © 2011 Society for Adolescent Health and Medicine. All rights reserved.

Primary School 5th and 8th Graders' Understanding and Mental Models about the Shape of the World and Gravity

Science.gov (United States)

Öztürk, Ayse; Doganay, Ahmet

2013-01-01

This study investigated primary school 5th and 8th graders' understanding and mental models related to the shape of the world and gravity, and how these models reflected the fact and what kind of a change there is from 5th to 8th graders. This research is based on a cross-sectional design. The study was conducted in a low socioeconomic level…

8th International Robotic Sailing Conference

CERN Document Server

Haug, Florian

2016-01-01

This book presents the cutting edge developments within a broad field related to robotic sailing. The contributions were presented during the 8th International Robotic Sailing Conference, which has taken place as a part of the 2015 World Robotic Sailing Championships in Mariehamn, Åland (Finland), August 31st – September 4th 2015. Since more than a decade, a series of competitions such as the World Robotic Sailing Championship have stimulated a variety of groups to work on research and development around autonomous sailing robots, which involves boat designers, naval architects, electrical engineers and computer scientists. While many of the challenges in building a truly autonomous sailboat are still unsolved, the books presents the state of the art of research and development within platform optimization, route and stability planning, collision avoidance, power management and boat control.

78 FR 28577 - Notification of Proposed Production Activity: Whirlpool Corporation Subzone 8I; (Washing Machines...

Science.gov (United States)

2013-05-15

... machine parts to the list of approved finished products and would also add imported components to the...; refrigeration parts; dishwashing machine parts; drying machine parts; water inlet valves; AC/DC fan motors; AC... Activity: Whirlpool Corporation Subzone 8I; (Washing Machines): Clyde and Green Springs, Ohio Whirlpool...

19th JANNAF Safety and Environmental Protection Subcommittee Meeting. Volume 1

Science.gov (United States)

Cocchiaro, J. E. (Editor); Becker, D. L. (Editor)

2002-01-01

This volume, the first of two volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the 19th Joint Army-Navy-NASA-Air Force (JANNAF) Safety & Environmental Protection Subcommittee Meeting. The meeting was held 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. Topics covered include green energetic materials and life cycle pollution prevention; space launch range safety; propellant/munitions demilitarization, recycling, and reuse: and environmental and occupational health aspects of propellants and energetic materials.

Control volume based modelling of compressible flow in reciprocating machines

DEFF Research Database (Denmark)

Andersen, Stig Kildegård; Thomsen, Per Grove; Carlsen, Henrik

2004-01-01

, and multidimensional effects must be calculated using empirical correlations; correlations for steady state flow can be used as an approximation. A transformation that assumes ideal gas is presented for transforming equations for masses and energies in control volumes into the corresponding pressures and temperatures......An approach to modelling unsteady compressible flow that is primarily one dimensional is presented. The approach was developed for creating distributed models of machines with reciprocating pistons but it is not limited to this application. The approach is based on the integral form of the unsteady...... conservation laws for mass, energy, and momentum applied to a staggered mesh consisting of two overlapping strings of control volumes. Loss mechanisms can be included directly in the governing equations of models by including them as terms in the conservation laws. Heat transfer, flow friction...

5th European Conference on Mechanisms Science (EUCOMES)

CERN Document Server

Viadero, Fernando; New Trends in Mechanism and Machine Science : from Fundamentals to Industrial Applications

2015-01-01

This work presents the most recent research in the mechanism and machine science field and its applications. The topics covered include: theoretical kinematics, computational kinematics, mechanism design, experimental mechanics, mechanics of robots, dynamics of machinery, dynamics of multi-body systems, control issues of mechanical systems, mechanisms for biomechanics, novel designs, mechanical transmissions, linkages and manipulators, micro-mechanisms, teaching methods, history of mechanism science and industrial and non-industrial applications. This volume consists of the Proceedings of the 5th European Conference on Mechanisms Science (EUCOMES), that was held in Guimarães, Portugal, from September 16 – 20, 2014. The EUCOMES is the main forum for the European community working in Mechanisms and Machine Science.

8th International Workshop on Natural Computing

CERN Document Server

Hagiya, Masami

2016-01-01

This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing, and educational technology. It presents extended versions of the best papers selected from the “8th International Workshop on Natural Computing” (IWNC8), a symposium held in Hiroshima, Japan, in 2014. The target audience is not limited to researchers working in natural computing but also includes those active in biological engineering, fine/media art design, aesthetics, and philosophy.

8th International Conference on Solid State Physics (SSP 2004), Workshop “Mössbauer Spectroscopy of Locally Heterogeneous Systems”

CERN Document Server

Kadyrzhanov, K. K; SSP 2004

2006-01-01

This volume contains papers presented at the 8th International Conference on Solid State Physics (SSP 2004), Workshop "Mössbauer Spectroscopy of Locally Heterogeneous Systems", held in Almaty, Kazakhstan, 23–26 August 2004. It should be of interest to researchers and PhD students working or interested in recent results in the locally inhomogeneous system investigations by Mössbauer Spectroscopy and the new concepts of data evaluation of complex Mössbauer spectra.

Implementation of machine learning for high-volume manufacturing metrology challenges (Conference Presentation)

Science.gov (United States)

Timoney, Padraig; Kagalwala, Taher; Reis, Edward; Lazkani, Houssam; Hurley, Jonathan; Liu, Haibo; Kang, Charles; Isbester, Paul; Yellai, Naren; Shifrin, Michael; Etzioni, Yoav

2018-03-01

In recent years, the combination of device scaling, complex 3D device architecture and tightening process tolerances have strained the capabilities of optical metrology tools to meet process needs. Two main categories of approaches have been taken to address the evolving process needs. In the first category, new hardware configurations are developed to provide more spectral sensitivity. Most of this category of work will enable next generation optical metrology tools to try to maintain pace with next generation process needs. In the second category, new innovative algorithms have been pursued to increase the value of the existing measurement signal. These algorithms aim to boost sensitivity to the measurement parameter of interest, while reducing the impact of other factors that contribute to signal variability but are not influenced by the process of interest. This paper will evaluate the suitability of machine learning to address high volume manufacturing metrology requirements in both front end of line (FEOL) and back end of line (BEOL) sectors from advanced technology nodes. In the FEOL sector, initial feasibility has been demonstrated to predict the fin CD values from an inline measurement using machine learning. In this study, OCD spectra were acquired after an etch process that occurs earlier in the process flow than where the inline CD is measured. The fin hard mask etch process is known to impact the downstream inline CD value. Figure 1 shows the correlation of predicted CD vs downstream inline CD measurement obtained after the training of the machine learning algorithm. For BEOL, machine learning is shown to provide an additional source of information in prediction of electrical resistance from structures that are not compatible for direct copper height measurement. Figure 2 compares the trench height correlation to electrical resistance (Rs) and the correlation of predicted Rs to the e-test Rs value for a far back end of line (FBEOL) metallization level

CLIMA 2016 - proceedings of the 12th REHVA World Congress:volume 6

OpenAIRE

2016-01-01

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 24 + 25 +26 + 27 + 28 +29 + 30 from track "Building Performance".

15th International Conference on Biomedical Engineering

CERN Document Server

2014-01-01

This volume presents the proceedings of the 15th ICMBE held from 4th to 7th December 2013, Singapore. Biomedical engineering is applied in most aspects of our healthcare ecosystem. From electronic health records to diagnostic tools to therapeutic, rehabilitative and regenerative treatments, the work of biomedical engineers is evident. Biomedical engineers work at the intersection of engineering, life sciences and healthcare. The engineers would use principles from applied science including mechanical, electrical, chemical and computer engineering together with physical sciences including physics, chemistry and mathematics to apply them to biology and medicine. Applying such concepts to the human body is very much the same concepts that go into building and programming a machine. The goal is to better understand, replace or fix a target system to ultimately improve the quality of healthcare. With this understanding, the conference proceedings offer a single platform for individuals and organisations working i...

Variability of Arthroscopy Case Volume in Orthopaedic Surgery Residency.

Science.gov (United States)

Gil, Joseph A; Waryasz, Gregory R; Owens, Brett D; Daniels, Alan H

2016-05-01

To examine orthopaedic surgery case logs for arthroscopy case volume during residency training and to evaluate trends in case volume and variability over time. Publicly available Accreditation Council for Graduate Medical Education surgical case logs from 2007 to 2013 for orthopaedic surgery residency were assessed for variability and case volume trends in shoulder, elbow, wrist, hip, knee, and ankle arthroscopy. The national average number of procedures performed in each arthroscopy category reported was directly compared from 2009 to 2013. The 10th and 90th percentile arthroscopy case volume was compared between 2007 and 2013 for shoulder and knee arthroscopy procedures. Subsequently, the difference between the 10th and 90th percentile arthroscopy case volume in each category in 2007 was compared with the difference between the 10th and 90th percentile arthroscopy case volume in each category in 2013. From 2007 to 2013, shoulder arthroscopy procedures performed per resident increased by 43.1% (P = .0001); elbow arthroscopy procedures increased by 28.0% (P = .00612); wrist arthroscopy procedures increased by 8.6% (P = .05); hip arthroscopy procedures, which were first reported in 2012, increased by 588.9%; knee arthroscopy procedures increased by 8.5% (P = .0435); ankle arthroscopy increased by 27.6% (P = .00149). The difference in knee and shoulder arthroscopy volume between residents in the 10th and 90th percentile in 2007 and residents in the 10th and 90th percentile in 2013 was not significant (P > .05). There was a 3.66-fold difference in knee arthroscopy volume between residents in the 10th and 90th percentile in 2007, whereas the difference was 3.36-fold in 2013 (P = .70). There was a 5.86-fold difference in shoulder arthroscopy case volume between residents in the 10th and 90th percentile in 2007, whereas the difference was 4.96-fold in 2013 (P = .29). The volume of arthroscopy cases performed by graduating orthopaedic surgery residents has

4th International Conference on Man–Machine Interactions

CERN Document Server

Brachman, Agnieszka; Kozielski, Stanisław; Czachórski, Tadeusz

2016-01-01

This book provides an overview of the current state of research on development and application of methods, algorithms, tools and systems associated with the studies on man-machine interaction. Modern machines and computer systems are designed not only to process information, but also to work in dynamic environment, supporting or even replacing human activities in areas such as business, industry, medicine or military. The interdisciplinary field of research on man-machine interactions focuses on broad range of aspects related to the ways in which human make or use computational artifacts, systems and infrastructure.   This monograph is the fourth edition in the series and presents new concepts concerning analysis, design and evaluation of man-machine systems. The selection of high-quality, original papers covers a wide scope of research topics focused on the main problems and challenges encountered within rapidly evolving new forms of human-machine relationships. The presented material is structured into fol...

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 8 + 9 + 10 + 11 + 12 + 13 from track "Sustainable Energy".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 8 + 9 + 10 + 11 + 12 + 13 from track "Sustainable Energy"....

[Review of WHO Expert Committee on Leprosy 8th report, --comparison to 7th report].

Science.gov (United States)

Kitajima, Shinichi; En, Junichiro; Kitajima, Shiori; Barua, Sumana; Goto, Masamichi

2014-03-01

In 2012 the WHO Expert Committee on Leprosy published its 8th report, 14 years after the publication of its 7th report in 1998. This report, the first since the leprosy reduction goal was met in 2000, highlights key points such as improvements in the quality of various services available to patients and the efforts of individuals and societies, in addition to medical progress in diagnosis and treatment. This review will mainly describe the changes made since the 7th report. Some of the main modifications are the deletion of single lesion paucibacillary type, elongated treatment of patients with high bacterial indices, the introduction of promising new drugs, and a shift from reducing the statistical number of patients to a new target for disability prevention.

Thermal expansion studies of ThW2O8 and UWO6

International Nuclear Information System (INIS)

Keskar, Meera; Krishnan, K.; Sali, S.K.

2014-01-01

Thorium and uranium oxysalts with hexavalent cations of elements of VI th group of the periodic table are important from mineralogical, environmental and technological points of view. Several molybdates and tungstates of uranium and thorium are known to have similar structural and thermo-physical properties. Earlier, thermal expansion behavior of ThMo 2 O 8 and UMoO 6 were reported from our laboratory. In the present work, thermal expansion behavior of ThW 2 O 8 and UWO 6 studied under vacuum from ambient to 1000 and 800℃, respectively using high temperature X-ray diffraction (HTXRD) technique is reported

Searching for 4th generation fermions at high-energy e+e- machines

International Nuclear Information System (INIS)

Dorfan, J.; Van Kooten, R.J.

1987-05-01

This writeup summarizes Monte Carlo studies on the feasibility of searching for 4th family fermions at high energy e + e - machines. By high energy it is meant at energies beyond the Z 0 ; the Z 0 searches having been studied extensively by the SLC and LEP collaborations. The specific examples of √s = 200 GeV (namely LEP200) and √s = 600 GeV (in line with work being done at SLAC to investigate the potential of a future linear collider) were chosen. The studies have been performed with the four vectors produced by the models and no attempt has been made to account for the effects of finite resolution and inefficiencies due to a real detector environment

8th International Conference on Physics and its Applications (ICOPIA)

International Nuclear Information System (INIS)

2016-01-01

Proceeding of 8 th International Conference of Physics and Its Applications (8 th ICOPIA) 2016 Preface International Conference of Physics and Its Applications (ICOPIA) is a biannual conference, started in 2001, for presenting and discussing current research in Physics and Its Applications. This year of 2016, this conference is the eighth one. Studies about material physics, optics, geophysics, instrumentation, magnetics and theoretical physics are presented either orally or by poster. This conference is mainly supported by Department of Physics, University of Sebelas Maret, Indonesia. The keynote presentations are provided especially to show the contribution of physicists to medical research. A study of pT resolution magnetic sensor utilizing MI element towards medical use is presented by Prof. Tsuyoshi Uchiyama, from Nagoya University, Japan. Presentation about computational intelligence technique for electroencephalography (EEG) analysis is delivered by Assoc. Prof. Lipo Wang from Nanyang Technological University, Singapore. Keynote presentation about polycapillary optic and its application in medical imaging which is provided by Prof. Carolyn Ann Macdonald, from University At Albany, USA. Understanding the synergic and competitive interaction between Polyvinyl alcohol and plasticizers onto Na-Bentonite Clay is presented by Khairuddin, Ph.D, from University of Sebelas Maret, Indonesia. This volume contains the papers presented in ICOPIA 2016. The papers are divided into eight sections: magnetism and magnetic material, material physics and characterization, acoustics, theoretical physics, instrumentation physics, optics and geophysics. This structure is made so that readers are easier to find an article in this proceeding. We would like to thank to all of the participants attending this conference and also to committee for their contribution to this high level conference and its overall success. We also would like to thank to the reviewers for their positive

Comparison of the 7(th) and proposed 8(th) editions of the AJCC/UICC TNM staging system for non-small cell lung cancer undergoing radical surgery.

Science.gov (United States)

Jin, Ying; Chen, Ming; Yu, Xinmin

2016-09-19

The present study aims to compare the 7(th) and the proposed 8(th) edition of the AJCC/UICC TNM staging system for NSCLC in a cohort of patients from a single institution. A total of 408 patients with NSCLC who underwent radical surgery were analyzed retrospectively. Survivals were analyzed using the Kaplan -Meier method and were compared using the log-rank test. Multivariate analysis was performed by the Cox proportional hazard model. The Akaike information criterion (AIC) and C-index were applied to compare the two prognostic systems with different numbers of stages. The 7(th) AJCC T categories, the proposed 8(th) AJCC T categories, N categories, visceral pleural invasion, and vessel invasion were found to have statistically significant associations with disease-free survival (DFS) on univariate analysis. In the 7(th) edition staging system as well as in the proposed 8(th) edition, T categories, N categories, and pleural invasion were independent factors for DFS on multivariate analysis. The AIC value was smaller for the 8(th) edition compared to the 7(th) edition staging system. The C-index value was larger for the 8(th) edition compared to the 7(th) edition staging system. Based on the data from our single center, the proposed 8(th) AJCC T classification seems to be superior to the 7(th) AJCC T classification in terms of DFS for patients with NSCLC underwent radical surgery.

Environmentally Friendly Machining

CERN Document Server

Dixit, U S; Davim, J Paulo

2012-01-01

Environment-Friendly Machining provides an in-depth overview of environmentally-friendly machining processes, covering numerous different types of machining in order to identify which practice is the most environmentally sustainable. The book discusses three systems at length: machining with minimal cutting fluid, air-cooled machining and dry machining. Also covered is a way to conserve energy during machining processes, along with useful data and detailed descriptions for developing and utilizing the most efficient modern machining tools. Researchers and engineers looking for sustainable machining solutions will find Environment-Friendly Machining to be a useful volume.

Proceedings of the 8th topical meeting on nuclear code development

International Nuclear Information System (INIS)

1993-03-01

The 8th Topical Meeting on Nuclear Code Development, organized by Committee on Reactor Physics and Nuclear Codes Committee of Japan Atomic Energy Research Institute (JAERI), was held at Tokai Research Establishment of JAERI, on 11th and 12th of November, 1992. In the meeting, 14 papers were presented on the topics of (1) the next generation nuclear reactor design system and (2) advances of the nuclear fuel reprocessing safety analysis codes. These papers are compiled in this proceedings. (author)

Teaching Crossroads: 8th IPB Erasmus Week

OpenAIRE

Silva, Elisabete Mendes (Ed.); Pais, Clarisse (Ed.); Pais, L.S. (Ed.)

2013-01-01

We are proud to present the second number of Teaching Crossroads, within the 8th IPB Erasmus week which took place in May 2012. This publication is the result of the papers delivered during our Erasmus Week that is becoming increasingly popular among teaching and non-teaching staff from several Erasmus partner Universities. Similarly to last year, we are continuing the publication of Teaching Crossroads whose main purpose is to reach students and teaching staff of the IPB...

[A new machinability test machine and the machinability of composite resins for core built-up].

Science.gov (United States)

Iwasaki, N

2001-06-01

A new machinability test machine especially for dental materials was contrived. The purpose of this study was to evaluate the effects of grinding conditions on machinability of core built-up resins using this machine, and to confirm the relationship between machinability and other properties of composite resins. The experimental machinability test machine consisted of a dental air-turbine handpiece, a control weight unit, a driving unit of the stage fixing the test specimen, and so on. The machinability was evaluated as the change in volume after grinding using a diamond point. Five kinds of core built-up resins and human teeth were used in this study. The machinabilities of these composite resins increased with an increasing load during grinding, and decreased with repeated grinding. There was no obvious correlation between the machinability and Vickers' hardness; however, a negative correlation was observed between machinability and scratch width.

21th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators

CERN Document Server

Schiehlen, Werner

2016-01-01

This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2016, the 21th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2016 is the 21st event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community.

Freedom and Slavery in Early Islamic Time (1st/7th and 2nd/8th centuries

Directory of Open Access Journals (Sweden)

Schneider, Irene

2007-12-01

Full Text Available This article focuses on two topics: the presumption of freedom in the “literary period” (from the 8^th century on and the question of enslavement, sale, bondage or self-dedition of free persons in the “pre-literary period” (7^th and 8^th centuries. Based on the assumption that the legal practice in Late Antiquity influenced the discussions of the early Muslim jurists I will try to reconstruct the legal discourse of the 1^st/7^th and 2^nd/ 8^th centuries and to show that this discourse comprised interesting legal opinions with regard to the sale of children, debt-bondage and the legal position of foundlings. In the legal literature which emerged from the 2^nd/8^th century the jurists did not, as one would expect, deal intensively with the topic. Thus there is, as will be shown, a certain inconsistency between the lively and controversial discourse in the “pre-literary period” on the topic, which will be reconstructed in this article, and the marginalization of the topic in the legal literature afterwards.

Este artículo se centra en dos cuestiones: por un lado, la presunción de libertad en el «período literario» (desde el s. VIII en adelante; y, por otro, la cuestión de la esclavización, venta o servidumbre —voluntaria o no— de personas libres en la «época preliteraria» (ss. VII y VIII. Asumiendo de partida la idea de que la práctica legal en la Antigüedad Tardía influyó en las discusiones de los primeros juristas musulmanes, trataré de reconstruir el discurso legal de los siglos I/VII y II/VIII y de mostrar que ese discurso contenía interesantes opiniones legales en relación a la venta de niños, servidumbre por deudas y la situación legal de los huérfanos. En la literatura legal que emergió desde el s. II/VIII los juristas, al contrario de lo que se hubiese esperado, no trataron estas cuestiones intensamente. Tal y

Dancetime! 500 Years of Social Dance. Volume II: 20th Century. [Videotape].

Science.gov (United States)

Teten, Carol

This 50-minute VHS videotape is the second in a 2-volume series that presents 500 years of social dance, music, and fashion. It features dance and music of the 20th century, including; 1910s: animal dances, castle walk, apache, and tango; 1920s: black bottom and charleston; 1930s: marathon, movie musicals, big apple, and jitterbug; 1940s: rumba;…

Investigation into How 8th Grade Students Define Fractals

Science.gov (United States)

Karakus, Fatih

2015-01-01

The analysis of 8th grade students' concept definitions and concept images can provide information about their mental schema of fractals. There is limited research on students' understanding and definitions of fractals. Therefore, this study aimed to investigate the elementary students' definitions of fractals based on concept image and concept…

Using Phun to Study "Perpetual Motion" Machines

Science.gov (United States)

Kores, Jaroslav

2012-01-01

The concept of "perpetual motion" has a long history. The Indian astronomer and mathematician Bhaskara II (12th century) was the first person to describe a perpetual motion (PM) machine. An example of a 13th-century PM machine is shown in Fig. 1. Although the law of conservation of energy clearly implies the impossibility of PM construction, over…

Fast Food Consumption and Food Prices: Evidence from Panel Data on 5th and 8th Grade Children

OpenAIRE

Khan, Tamkeen; Powell, Lisa M.; Wada, Roy

2012-01-01

Fast food consumption is a dietary factor associated with higher prevalence of childhood obesity in the United States. The association between food prices and consumption of fast food among 5th and 8th graders was examined using individual-level random effects models utilizing consumption data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K), price data from American Chamber of Commerce Researchers Association (ACCRA), and contextual outlet density data from...

Native American Students' Understanding of Geologic Time Scale: 4th-8th Grade Ojibwe Students' Understanding of Earth's Geologic History

Science.gov (United States)

Nam, Younkyeong; Karahan, Engin; Roehrig, Gillian

2016-01-01

Geologic time scale is a very important concept for understanding long-term earth system events such as climate change. This study examines forty-three 4th-8th grade Native American--particularly Ojibwe tribe--students' understanding of relative ordering and absolute time of Earth's significant geological and biological events. This study also…

XII International Conference on the Theory of Machines and Mechanisms

CERN Document Server

Bílek, Martin; Žabka, Petr

2017-01-01

This book presents the most recent advances in the research of machines and mechanisms. It collects 54 reviewed papers presented at the XII International Conference on the Theory of Machines and mechanisms (TMM 2016) held in Liberec, Czech Republic, September 6-8, 2016. This volume offers an international selection of the most important new results and developments, grouped in six different parts, representing a well-balanced overview, and spanning the general theory of machines and mechanisms, through analysis and synthesis of planar and spatial mechanisms, linkages and cams, robots and manipulators, dynamics of machines and mechanisms, rotor dynamics, computational mechanics, vibration and noise in machines, optimization of mechanisms and machines, mechanisms of textile machines, mechatronics to the control and monitoring systems of machines. This conference is traditionally organised every four year under the auspices of the international organisation IFToMM and the Czech Society for Mechanics.

20th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators

CERN Document Server

Glazunov, Victor

2014-01-01

This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2014, the 20th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2014 is the twentieth event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community. Proceedings volumes of ROMANSY have been always published to be available, also after the symposium, to a large public of scholars and designers with the aim to give an overview of new advances and trends in the theory, design, and practice of robots....

Compositional characterization of sintered (U,Th)O2 pellets by EDXRF using fused bead specimens

International Nuclear Information System (INIS)

Sanjay Kumar, S.; Dhara, Sangita; Misra, N.L.; Aggarwal, S.K.

2015-01-01

Fused bead specimens were used for analyzing sintered (U,Th)O 2 pellets by Energy Dispersive X-Ray Fluorescence (EDXRF) spectrometry. The bead specimens of calibration mixtures U 3 O 8 and ThO 2 were made by fusing them in Lithium Tetraborate/Metaborate fusion mixtures using a fusion bead machine. The EDXRF spectra of these beads were used for making calibration plot for U% determination in (U+Th) amounts. Using these calibration plots and EDXRF spectra of bead of sintered (U,Th)O 2 pellets, U% in these pellets was successfully determined. (author)

Suicidal ideation among students of the 7th, 8th, and 9th grades in the State of Lara, Venezuela: the Global School Health Survey.

Science.gov (United States)

Granero, Ricardo; Poni, Esteban; Poni, Carolin

2008-12-01

Suicidal behavior among adolescents is not a well-explored public health problem. Health policy decision-making on suicidal behavior needs reliable information on the prevalence of suicidal ideation (SI) and its associated risk factors to produce health promotion and prevention programs. The Global School Health Survey is a self-administered survey done on a random probabilistic sample among students of the 7th, 8th, and 9th grades in the Lara State, Venezuela, school period 2003 to 2004. Point prevalence of SI and associated factors were included and the odds (OR) of having SI was calculated given selected factors. Two-thousand seventy (2070) respondents, of which 13.5 % reported having SI in the last 12 months, and in females more than males (14.6% vs. 11.7%). The OR for SI, according to an associated risk factor, were among (a) females: age > or = 14 years (2.2), worries (3.42), loneliness (8.8), ever had sexual intercourse (5.58), alcohol (8.43) and (b) males: having only one or non close friends (3.69), alcohol (12.36), ever had sexual intercourse (2.73). Behavioral risk factors are relatively new in the field of surveillance systems; therefore, results on SI should be cautiously taken into consideration and a wide discussion should be encouraged as we learn how to best use the results for health promotion and disease prevention.

Self-reported reasons for vaping among 8th, 10th, and 12th graders in the US: Nationally-representative results.

Science.gov (United States)

Patrick, Megan E; Miech, Richard A; Carlier, Carola; O'Malley, Patrick M; Johnston, Lloyd D; Schulenberg, John E

2016-08-01

The study describes the most common reasons for using vaporizers (such as e-cigarettes) among US adolescents and investigates how reasons for use differ by grade, lifetime cigarette use, frequency of vaporizer use, gender, race/ethnicity, and parent education. Data were collected from 4066 students in the 8th, 10th, and 12th grades in 2015 as part of the Monitoring the Future study, a cross-sectional and nationally representative US survey. Common reasons for vaporizer use reported by respondents who had ever used a vaporizer were experimentation (53.0%), taste (37.2%), boredom (23.5%), having a good time (22.4%), and relaxation (21.6%). Reasons differed little across grades or parent education; reasons differed by lifetime use of regular cigarettes, frequency of vaping, gender, and race/ethnicity. Overall, results suggest that decisions to vape are based on curiosity, taste, and pleasure, rather than for reasons such as quitting regular cigarettes or substituting for regular cigarette smoking. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Effect of malaria on placental volume measured using three-dimensional ultrasound: a pilot study

Directory of Open Access Journals (Sweden)

Rijken Marcus J

2012-01-01

Full Text Available Abstract Background The presence of malaria parasites and histopathological changes in the placenta are associated with a reduction in birth weight, principally due to intrauterine growth restriction. The aim of this study was to examine the feasibility of studying early pregnancy placental volumes using three-dimensional (3D ultrasound in a malaria endemic area, as a small volume in the second trimester may be an indicator of intra-uterine growth restriction and placental insufficiency. Methods Placenta volumes were acquired using a portable ultrasound machine and a 3D ultrasound transducer and estimated using the Virtual Organ Computer-aided AnaLysis (VOCAL image analysis software package. Intra-observer reliability and limits of agreement of the placenta volume measurements were calculated. Polynomial regression models for the mean and standard deviation as a function of gestational age for the placental volumes of uninfected women were created and tested. Based on these equations each measurement was converted into a z -score. The z-scores of the placental volumes of malaria infected and uninfected women were then compared. Results Eighty-four women (uninfected = 65; infected = 19 with a posterior placenta delivered congenitally normal, live born, single babies. The mean placental volumes in the uninfected women were modeled to fit 5th, 10th, 50th, 90th and 95th centiles for 14-24 weeks' gestation. Most placenta volumes in the infected women were below the 50th centile for gestational age; most of those with Plasmodium falciparum were below the 10th centile. The 95% intra-observer limits of agreement for first and second measurements were ± 37.0 mL and ± 25.4 mL at 30 degrees and 15 degrees rotation respectively. Conclusion The new technique of 3D ultrasound volumetry of the placenta may be useful to improve our understanding of the pathophysiological constraints on foetal growth caused by malaria infection in early pregnancy.

8th International Symposium on Heating, Ventilation and Air Conditioning

CERN Document Server

Zhu, Yingxin; Li, Yuguo; Vol.1 Indoor and Outdoor Environment; Vol.2 HVAC&R Component and Energy System; Vol.3 Building Simulation and Information Management

2014-01-01

Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning is based on the 8th International Symposium of the same name (ISHVAC2013), which took place in Xi’an on October 19-21, 2013. The conference series was initiated at Tsinghua University in 1991 and has since become the premier international HVAC conference initiated in China, playing a significant part in the development of HVAC and indoor environmental research and industry around the world. This international conference provided an exclusive opportunity for policy-makers, designers, researchers, engineers and managers to share their experience. Considering the recent attention on building energy consumption and indoor environments, ISHVAC2013 provided a global platform for discussing recent research on and developments in different aspects of HVAC systems and components, with a focus on building energy consumption, energy efficiency and indoor environments. These categories span a broad range of topics, and the proce...

Mi Quinto Libro de Maquinas Simples: El Plano Inclinado. Escuela Intermedia Grados 7, 8 y 9 (My Fifth Book of Simple Machines: The Inclined Plane. Intermediate School Grades 7, 8, and 9).

Science.gov (United States)

Alvarado, Patricio R.; Montalvo, Luis

This is the fifth book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains the principles and some of the uses of inclined planes, as they appear in simple machines, by suggesting experiments and posing questions concerning drawings in the book…

Examination of the 8th Grade Students' TIMSS Mathematics Success in Terms of Different Variables

Science.gov (United States)

Kaleli-Yilmaz, Gül; Hanci, Alper

2016-01-01

The aim of this study is to determine how the TIMSS mathematics success of the 8th grade students differentiates according to the school type, gender, mathematics report mark, parents' education level, cognitive domains and cognitive domains by gender. Relational survey method was used in the study. Six-hundred fifty two 8th grade students…

The Influence of Documentary Films on 8th Grade Students' Views about Nature of Science

Science.gov (United States)

Seckin Kapucu, Munise; Cakmakci, Gultekin; Aydogdu, Cemil

2015-01-01

This quasi-experimental study aims to investigate the documentary films' influence on 8th grade students' nature of science views. The study's participants were 113 8th grade students from two different schools taught by two different teachers. The study was completed over a 6-week period, during which topics related to "Cell Division and…

13th International Conference on Man-Machine-Environment System Engineering

CERN Document Server

Dhillon, Balbir

2014-01-01

The integrated and advanced science research topic Man-Machine-Environment System Engineering (MMESE) was first established in China by Professor Shengzhao Long in 1981, with direct support from one of the greatest modern Chinese scientists, Xuesen Qian. In a letter to Shengzhao Long from October 22nd, 1993, Xuesen Qian wrote: “You have created a very important modern science and technology in China!”   MMESE primarily focuses on the relationship between man, machines and the environment, studying the optimum combination of man-machine-environment systems. In this system, “man” refers to people in the workplace (e.g. operators, decision-makers); “ machine” is the general name for any object controlled by man (including tools, machinery, computers, systems and technologies), and “environment” describes the specific working conditions under which man and machine interact (e.g. temperature, noise, vibration, hazardous gases etc.). The three goals of optimization of Man-Machine-Environment system...

14th International Conference on Man-Machine-Environment System Engineering

CERN Document Server

Dhillon, Balbir

2015-01-01

The integrated and advanced science research topic man-machine-environment system engineering (MMESE) was first established in China by Professor Shengzhao Long in 1981, with direct support from one of the greatest modern Chinese scientists, Xuesen Qian. In a letter to Shengzhao Long from October 22nd, 1993, Xuesen Qian wrote: “You have created a very important modern science and technology in China!”   MMESE primarily focuses on the relationship between man, machines and the environment, studying the optimum combination of man-machine-environment systems. In this system, “man” refers to people in the workplace (e.g. operators, decision-makers); “ machine” is the general name for any object controlled by man (including tools, machinery, computers, systems and technologies), and “environment” describes the specific working conditions under which man and machine interact (e.g. temperature, noise, vibration, hazardous gases etc.). The three goals of optimization of man-machine-environment system...

Summary of environmental study carried out by Bhabha Atomic Research Centre during 8th, 9th and 10th summer Indian expeditions to Antarctica

International Nuclear Information System (INIS)

Ramachandran, T.V.; Sathe, A.P.; Joshi, P.V.; Balani, M.C.

1994-01-01

The Bhabha Atomic Research Centre has participated in the 8th, 9th and 10th summer expeditions to Antarctica during 1988-91 period to carry out background radiation survey and to collect representative samples for radioactivity and heavy metal analyses. Spot measurements of ions as well as Radon daughter radionuclides were also carried out during the expeditions. Radon levels as well as heavy metal pollutant concentrations have been found to be quite low in general; however higher levels were observed at places where human activity is concentrated around the landing area as well as the laboratory site. The richness of the shelf waters at Antarctic were also realised through analysis of phytoplankton and zooplankton samples. (author). 25 refs., 5 figs., 26 tabs

Using Phun to Study ``Perpetual Motion'' Machines

Science.gov (United States)

Koreš, Jaroslav

2012-05-01

The concept of "perpetual motion" has a long history. The Indian astronomer and mathematician Bhaskara II (12th century) was the first person to describe a perpetual motion (PM) machine. An example of a 13th- century PM machine is shown in Fig. 1. Although the law of conservation of energy clearly implies the impossibility of PM construction, over the centuries numerous proposals for PM have been made, involving ever more elements of modern science in their construction. It is possible to test a variety of PM machines in the classroom using a program called Phun2 or its commercial version Algodoo.3 The programs are designed to simulate physical processes and we can easily simulate mechanical machines using them. They provide an intuitive graphical environment controlled with a mouse; a programming language is not needed. This paper describes simulations of four different (supposed) PM machines.4

An Investigation of Attitudes of 6-8th Graders Towards Universal Values

Directory of Open Access Journals (Sweden)

Ender DURUALP

2012-10-01

Full Text Available This study aims to describe attitudes of 6-8th graders towards universal values and examine the impact of their age, gender, grade level, academic performance, parental level of education, and family income on their attitudes towards universal values. The population consisted of 6-8th graders being taught in primary schools in Çankırı, Turkey. The sample consisted of 361 students (203 girls, 158 boys randomly selected from Çankırı İsmet İnönü Elementary School located in Çankırı which attracts the highest number of students from each level of socioeconomic status. The sociodemographic data of children and their parents were collected through a “General Information Form”, and the data related to attitudes towards universal values were obtained by the “Attitude Towards Universal Values Scale” developed by Demir and Koç (2009. Data were analyzed through Kolmogorov-Smirnov, Mann-Whitney U, Kruskal-Wallis H tests, and Cronbach Alpha (α reliability coefficient. Results showed that girls (p>0.05, 8th graders, academically-talented children, those whose parents are university graduates, and those with a family income of minimum wage or more have more positive attitudes towards universal values (p<0.05.

The Th1/Th2/Th17/Treg paradigm induced by stachydrine hydrochloride reduces uterine bleeding in RU486-induced abortion mice.

Science.gov (United States)

Li, Xia; Wang, Bin; Li, Yuzhu; Wang, Li; Zhao, Xiangzhong; Zhou, Xianbin; Guo, Yuqi; Jiang, Guosheng; Yao, Chengfang

2013-01-09

The Th1/Th2/Th17/Treg paradigm plays an important role in achieving maternal-fetal immunotolerance and participates in RU486-induced abortion. Excessive uterine bleeding is the most common side effect of RU486-induced abortion; however, its etiopathogenesis has not been fully understood. Therefore, elucidating the correlation between the Th1/Th2/Th17/Treg paradigm and the volume of uterine bleeding may offer novel therapeutic target for reducing uterine bleeding in RU486-induced abortion. Leonurus sibiricus has been used in clinics to reduce postpartum hemorrhage with low toxicity and high efficiency; however, the effective constituents and therapeutic mechanism have not been described. Stachydrine hydrochloride is the main constituent of L. sibiricus, therefore L. sibiricus is regarded as a candidate for reducing uterine bleeding in RU486-induced abortion mice by regulating the Th1/Th2/Th17/Treg paradigm. The purpose of this study was to determine the Th1/Th2/Th17/Treg paradigm in uterine bleeding of RU486-induced abortion mice and to elucidate the immunopharmacologic effects of stachydrine hydrochloride on inducing the Th1/Th2/Th17/Treg paradigm in reducing the uterine bleeding volume in RU486-induced abortion mice. To investigate the Th1/Th2/Th17/Treg paradigm in uterine bleeding during RU486-induced abortion mice, pregnant BALB/c mice were treated with high- and low-dose RU486 (1.5mg/kg and 0.9 mg/kg, respectively), and the serum progesterone (P(4)) protein level, uterine bleeding volume, and proportions of Th1/Th2/Th17/Treg cells in mice at the maternal-fetal interface were detected by ELISA assay, alkaline hematin photometric assay, and flow cytometry, respectively. To determine the regulatory effect of stachydrine hydrochloride on the Th1/Th2/Th17/Treg paradigm in vitro, splenocytes of non-pregnant mice were separated and treated with P(4,) RU486, and/or stachydrine hydrochloride (10(-5)M, 10(-4)M, and 10(-3)M, respectively). The proportions of Th1/Th2/Th17

8th Brazilian Congress on Metrology (Metrologia 2015)

International Nuclear Information System (INIS)

2016-01-01

such as those relating to the International Year of Light. The events are meetings on Electricity (XI International Seminar on Electrical Metrology - SEMETRO), Ionizing Radiation (II Brazilian Congress on Ionizing Radiation - CBMRI) and the Meeting of the Brazilian Chemical Metrology Network (REMEQ). As in previous events, we hosted the Expo Metrology 2015 trade show and an exhibition of measuring equipment. During the conference, short courses in various areas of interest in Metrology and Conformity Assessment were given, organized by the Basic Industrial Technology National School - ENTIB, an initiative from the Brazilian Society of Metrology (SBM). The 8"t"h Brazilian Congress on Metrology consisted of Keynote Speeches (6) and regular papers (292). Among the regular papers, the 100 most outstanding ones, comprising a high quality content on Metrology, were selected to be published in this issue of the Journal of Physics: Conference Series. With tremendous satisfaction and gratefulness, the organizers of METROLOGIA 2015 would like to present this volume of IOP Journal of Physics: Conference Series (JPCS) to the scientific community to promote further research in Metrology. We believe that (paper)

Proceedings of the 8th Nordic Combinatorial Conference

DEFF Research Database (Denmark)

Geil, Olav; Andersen, Lars Døvling

The Nordic Combinatorial Conferences were initiated in 1981 by mathematicians from Stavanger. Held approximately every three years since then, the conferences have been able to sustain the interest from combinatorialists all over the Nordic countries. In 2004 the 8th conference is held in Aalborg......, Denmark. We are pleased that so many people have chosen to attend, and that lectures were offered from more participants than we had originally reserved time for. We asked two mathematicians to give special lectures and are happy that both accepted immediately. Andries Brouwer from the Technical...

News from the Library: The 8th edition Karlsruhe nuclide chart has been released

CERN Multimedia

CERN Library

2012-01-01

The 8th edition of the Karlsruhe Nuclide Chart contains new data not found in the 7th edition.   Since 1958, the well-known Karlsruhe Nuclide Chart has provided scientists with structured, valuable information on the half-lives, decay modes and energies of radioactive nuclides. The chart is used in many disciplines in physics (health physics, radiation protection, nuclear and radiochemistry, astrophysics, etc.) but also in the life and earth sciences (biology, medicine, agriculture, geology, etc.). The 8th edition of the Karlsruhe Nuclide Chart contains new data on 737 nuclides not found in the 7th edition. In total, nuclear data on 3847 experimentally observed ground states and isomers are presented. A new web-based version of this chart is in the final stages of development for use within the Nucleonica Nuclear Science Portal - a portal for which CERN has an institutional license. The chart is also available in paper format.   If you want to buy a paper version of the chart, ple...

Characterization and densification studies on ThO{sub 2}-UO{sub 2} pellets derived from ThO{sub 2} and U{sub 3}O{sub 8} powders

Energy Technology Data Exchange (ETDEWEB)

Kutty, T.R.G. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)]. E-mail: tkutty@magnum.barc.ernet.in; Hegde, P.V. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Khan, K.B. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Jarvis, T. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Sengupta, A.K. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Majumdar, S. [Radiometallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Kamath, H.S. [Nuclear Fuels Group, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

2004-12-01

ThO{sub 2} containing around 2-3% {sup 233}UO{sub 2} is the proposed fuel for the forthcoming Indian Advanced Heavy Water Reactor (AHWR). This fuel is prepared by powder metallurgy technique using ThO{sub 2} and U{sub 3}O{sub 8} powders as the starting material. The densification behaviour of the fuel was evaluated using a high temperature dilatometer in four different atmospheres Ar, Ar-8%H{sub 2}, CO{sub 2} and air. Air was found to be the best medium for sintering among them. For Ar and Ar-8%H{sub 2} atmospheres, the former gave a slightly higher densification. Thermogravimetric studies carried out on ThO{sub 2}-2%U{sub 3}O{sub 8} granules in air showed a continuous decrease in weight up to 1500 deg. C. The effectiveness of U{sub 3}O{sub 8} in enhancing the sintering of ThO{sub 2} has been established.

A method to combine target volume data from 3D and 4D planned thoracic radiotherapy patient cohorts for machine learning applications

NARCIS (Netherlands)

Johnson, Corinne; Price, Gareth; Khalifa, Jonathan; Faivre-Finn, Corinne; Dekker, Andre; Moore, Christopher; van Herk, Marcel

2017-01-01

The gross tumour volume (GTV) is predictive of clinical outcome and consequently features in many machine-learned models. 4D-planning, however, has prompted substitution of the GTV with the internal gross target volume (iGTV). We present and validate a method to synthesise GTV data from the iGTV,

The 8th-10 th January 2009 snowfalls: a case of Mediterranean warm advection event

Science.gov (United States)

Aguado, F.; Ayensa, E.; Barriga, M.; Del Hoyo, J.; Fernández, A.; Garrido, N.; Martín, A.; Martín, F.; Roa, I. Martínez, A.; Pascual, R.

2009-09-01

From 8 th to 10 th of January 2009, significant snowfalls were reported in many areas of the Iberian Peninsula and the Balearic Islands. This relevant event was very important from the meteorological and social impact point of views. The snow affected many zones, especially the regions of Madrid, Castilla & León and Castilla-La Mancha (Spanish central plateau) with the persistence and thickness of solid precipitation. Up to twenty-five centimetres of snow were reported in some places. On 9th of January the snowfalls caused great social and media impact due to the fact that they took place in the early hours in the Madrid metropolitan areas, affecting both air traffic and land transport. The "Madrid-Barajas" airport was closed and the city was collapsed during several hours. A study of this situation appears in the poster. The snowstorm was characterized by the previous irruption of an European continental polar air mass, that subsequently interacted with a wet and warm air mass of Mediterranean origin, all preceded by low level easterly flows. This type of snowfall is called "warm advection". These winter situations are very efficient from precipitation point of view, generating significant snowfalls and affecting a lot of areas.

8th Cambridge Workshop on Universal Access and Assistive Technology

CERN Document Server

Lazar, Jonathan; Heylighen, Ann; Dong, Hua

2016-01-01

This book presents the proceedings of the 8th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '14), incorporating the 11th Cambridge Workshop on Rehabilitation Robotics, held in Cambridge, England in March 2016. It presents novel and state-of-the-art research from an international group of leaders in the fields of universal access and assistive technology. It explores various issues including the reconciliation of usability, accessibility and inclusive design, the design of inclusive assistive and rehabilitation systems, measuring product demand and human capabilities, data mining and visualizing inclusion, legislation in inclusive design, and situational inclusive interfaces (automotive and aerospace). This book provides an invaluable resource to researchers, postgraduates, design practitioners, therapists and clinical practitioners, as well as design teachers.

The 8th ICGG International Conference on Gas Geochemistry Preface: Fluids and tectonics

Directory of Open Access Journals (Sweden)

F. Italiano

2007-06-01

Full Text Available The 8th International Conference on Gas Geochemistry provided the opportunity for scientists from different countries to meet each other, exchange ideas on the state of the art in gas geochemistry, and discuss advance in fluid geochemistry. The 8th ICGG meeting focused on three main geologic environments currently interacting with the human life: volcanoes, earthquakes and hydrocarbons. Ninety-four presentations gave participants chance to cover a variety of important research topics on gas geochemistry in geosciences including: gas migration in terrestrial and marine environments, Earth degassing and its relation to seismicity, volcanic eruptions, rare gases and application of isotope techniques, measurement and analytical techniques.

Mi Cuarto Libro de Maquinas Simples: Otras Modificaciones de la Rueda. Escuela Intermedia Grados 7, 8 y 9 (My Fourth Book of Simple Machines: Other Modifications of the Wheel. Intermediate School Grades 7, 8, and 9).

Science.gov (United States)

Alvarado, Patricio R.; Montalvo, Luis

This is the fourth book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains further refinements of the wheel which is introduced in volume three. The fourth volume explains principles behind gears and the relationship between velocity and force by…

Estimation of chemical carcass composition from 8th rib characteristics with Belgian blue double-muscled bulls.

Science.gov (United States)

De Campeneere, S; Fiems, L O; Van de Voorde, G; Vanacker, J M; Boucque, C V; Demeyer, D I

1999-01-01

Characteristics from the 8th rib cut: chemical composition, tissue composition after dissection, specific gravity (SG) and m. longissimus thoracis (LT) composition, collected on 17 Belgian Blue double-muscled fattening bulls were used to generate equations for predicting chemical carcass composition. Carcass composition was best predicted from chemical analysis of the 8th rib cut and the empty body weight (EBW) of the bull. Carcass chemical fat content (CCF, kg) was predicted from the 8th rib cut fat content (ether extract, 8RF, kg) by the following regression: CCF=1.94+27.37 8RF (R(2)=0.957, RSD =9.89%). A higher coefficient was found for carcass water (CCW, kg) predicted from 8RF and EBW: CCW=-2.26+0.28 EBW-34.28 8RF (R(2)=0.997, RSD=1.48%). No parameter was found to improve the prediction of CCP from EBW solely: CCP=-0.86+0.08 EBW (R(2) =0.992, RSD=2.61%). Prediction equations based solely on LT composition had low R(2) values of between 0.38 and 0.67, whereas no significant equations were found using SG. However, equations based on EBW had R(2) values between 0.78 and 0.99. Chemical components of the 8th rib cut in combination with EBW are most useful in predicting the chemical composition of the carcass of Belgian-Blue double-muscled bulls.

Bibliography of Research Support for K-8th Grade Inclusive Education

Science.gov (United States)

National Center on Schoolwide Inclusive School Reform: The SWIFT Center, 2014

2014-01-01

Presented here are references to books, chapters, and peer-reviewed journal articles that provide evidence for improved student outcomes through inclusive education in elementary and middle schools (K-8th grades). Not included here are the broad evidence bases for each feature in the SWIFT framework.

Environmental diagnosis of the washing machine motor

DEFF Research Database (Denmark)

Erichsen, Hanne K. Linnet

1997-01-01

An environmental diagnosis of the washing machine focusing on the motor is performed. The goal of the diagnosis is to designate environmental focus points in the product. The LCA of the washing machine showed impact potentials from the life cycle of the product (see: LCA of a washing machine). Th...... up 2%, Manually disassembling and recycling of metals, Reuse of motor in a new washing machine, aluminium wire instead of copper wire in the motor....

Design of rotating electrical machines

CERN Document Server

Pyrhonen , Juha; Hrabovcova , Valeria

2013-01-01

In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machinesAn expanded section on the design of permanent magnet synchronous machines, now repo

16th International Conference on Man-Machine-Environment System Engineering

CERN Document Server

Dhillon, Balbir

2016-01-01

This research topic was first established in China by Professor Shengzhao Long in 1981, with direct support from one of the greatest modern Chinese scientists, Xuesen Qian. In a letter to Shengzhao Long from October 22nd, 1993, Xuesen Qian wrote: “You have created a very important modern science subject and technology in China!” MMESE primarily focuses on the relationship between Man, Machine and Environment, studying the optimum combination of man-machine-environment systems. In this system, “Man” refers to working people as the subject in the workplace (e.g. operators, decision-makers); “Machine” is the general name for any object controlled by Man (including tools, machinery, computers, systems and technologies), and “Environment” describes the specific working conditions under which Man and Machine interact (e.g. temperature, noise, vibration, hazardous gases etc.). The three goals of optimization are to ensure "Safety, High efficiency and Economy" of man-machine-environment systems. These...

8th Conference on Complex Networks

CERN Document Server

Menezes, Ronaldo; Sinatra, Roberta; Zlatic, Vinko

2017-01-01

This book collects the works presented at the 8th International Conference on Complex Networks (CompleNet) 2017 in Dubrovnik, Croatia, on March 21-24, 2017. CompleNet aims at bringing together researchers and practitioners working in areas related to complex networks. The past two decades has witnessed an exponential increase in the number of publications within this field. From biological systems to computer science, from economic to social systems, complex networks are becoming pervasive in many fields of science. It is this interdisciplinary nature of complex networks that CompleNet aims at addressing. The last decades have seen the emergence of complex networks as the language with which a wide range of complex phenomena in fields as diverse as physics, computer science, and medicine (to name a few) can be properly described and understood. This book provides a view of the state-of-the-art in this dynamic field and covers topics such as network controllability, social structure, online behavior, recommend...

Stereolithographic volume evaluation of healing and shaping after rhinoplasty operations.

Science.gov (United States)

Tatlidede, Soner; Turgut, Gürsel; Gönen, Emre; Kayali, Mahmut Ulvi; Baş, Lütfü

2009-07-01

Nasal edema and volume changes are unavoidable processes during the healing period after rhinoplasty. Various applications were reported regarding the prevention of early edema; however, the literature shows no study focused on the course of the nasal edema and volume changes up-to-date. We aimed to study the nasal volume changes during the first year of postoperative healing period and to form a recovery and volume change diagram with the obtained data. We prepared standard frames and nasal molds of 7 rhinoplasty patients at regular time intervals (preoperative period and at the postoperative 1st, 2nd, 4th, 8th, 12th, 24th, and 52nd weeks). Plaster nasal models were created by using these molds. Volumes of models were measured by computed tomographic scanning and three-dimensional image processing programs. According to our results, the nasal edema reaches its maximum level at the postoperative fourth week and then rapidly decreases until its minimum level at the eighth week. In contrast with the general opinion, the nasal volume begins to increase smoothly reaching to a level minimally below the preoperative value by the end of the first year.

Downscaling of MODIS One Kilometer Evapotranspiration Using Landsat-8 Data and Machine Learning Approaches

Directory of Open Access Journals (Sweden)

Yinghai Ke

2016-03-01

Full Text Available This study presented a MODIS 8-day 1 km evapotranspiration (ET downscaling method based on Landsat 8 data (30 m and machine learning approaches. Eleven indicators including albedo, land surface temperature (LST, and vegetation indices (VIs derived from Landsat 8 data were first upscaled to 1 km resolution. Machine learning algorithms including Support Vector Regression (SVR, Cubist, and Random Forest (RF were used to model the relationship between the Landsat indicators and MODIS 8-day 1 km ET. The models were then used to predict 30 m ET based on Landsat 8 indicators. A total of thirty-two pairs of Landsat 8 images/MODIS ET data were evaluated at four study sites including two in United States and two in South Korea. Among the three models, RF produced the lowest error, with relative Root Mean Square Error (rRMSE less than 20%. Vegetation greenness related indicators such as Normalized Difference Vegetation Index (NDVI, Enhanced Vegetation Index (EVI, Soil Adjusted Vegetation Index (SAVI, and vegetation moisture related indicators such as Normalized Difference Infrared Index—Landsat 8 OLI band 7 (NDIIb7 and Normalized Difference Water Index (NDWI were the five most important features used in RF model. Temperature-based indicators were less important than vegetation greenness and moisture-related indicators because LST could have considerable variation during each 8-day period. The predicted Landsat downscaled ET had good overall agreement with MODIS ET (average rRMSE = 22% and showed a similar temporal trend as MODIS ET. Compared to the MODIS ET product, the downscaled product demonstrated more spatial details, and had better agreement with in situ ET observations (R2 = 0.56. However, we found that the accuracy of MODIS ET was the main control factor of the accuracy of the downscaled product. Improved coarse-resolution ET estimation would result in better finer-resolution estimation. This study proved the potential of using machine learning

Nuclear regulatory legislation, 104th Congress. Volume 2, No. 4

International Nuclear Information System (INIS)

1997-12-01

This document is the second of two volumes compiling statutes and material pertaining to nuclear regulatory legislation through the 104th Congress, 2nd Session. It is intended for use as a U.S. Nuclear Regulatory Commission (NRC) internal resource document. Legislative information reproduced in this document includes portions of the Paperwork Reduction Act, various acts pertaining to low-level radioactive waste, the Clean Air Act, the Federal Water Pollution Control Act, the National Environmental Policy Act, the Hazardous Materials Transportation Act, the West Valley Demonstration Project Act, Nuclear Non-Proliferation and Export Licensing Statutes, and selected treaties, agreements, and executive orders. Other information provided pertains to Commissioner tenure, NRC appropriations, the Chief Financial Officers Act, information technology management reform, and Federal civil penalties

Nuclear regulatory legislation, 104th Congress. Volume 2, No. 4

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This document is the second of two volumes compiling statutes and material pertaining to nuclear regulatory legislation through the 104th Congress, 2nd Session. It is intended for use as a U.S. Nuclear Regulatory Commission (NRC) internal resource document. Legislative information reproduced in this document includes portions of the Paperwork Reduction Act, various acts pertaining to low-level radioactive waste, the Clean Air Act, the Federal Water Pollution Control Act, the National Environmental Policy Act, the Hazardous Materials Transportation Act, the West Valley Demonstration Project Act, Nuclear Non-Proliferation and Export Licensing Statutes, and selected treaties, agreements, and executive orders. Other information provided pertains to Commissioner tenure, NRC appropriations, the Chief Financial Officers Act, information technology management reform, and Federal civil penalties.

Studies on the synthesis of nanocrystalline Y{sub 2}O{sub 3} and ThO{sub 2} through volume combustion and their sintering

Energy Technology Data Exchange (ETDEWEB)

Sanjay Kumar, D. [Fuel Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102, Tamil Nadu (India); Ananthasivan, K., E-mail: asivan@igcar.gov.in [Fuel Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102, Tamil Nadu (India); Venkata Krishnan, R. [Fuel Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102, Tamil Nadu (India); Amirthapandian, S. [Material Physics Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102, Tamil Nadu (India); Dasgupta, Arup [Microscopy and Thermo-Physical Property Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102, Tamil Nadu (India)

2016-10-15

Volume combustion was observed in the auto-ignition of the citrate gels containing the nitrates of yttrium/thorium for the first time in mixture with a fuel (citric acid) to oxidant (Y{sup 3+} or Th{sup 4+} nitrate) ratio close to that demanded by the stoichiometry. These nanocrystalline powders were characterized for their bulk density, specific surface area, particle size distribution, carbon residue and X-ray crystallite size and were sintered by both the conventional and the two-step method. The maximum relative sintered density of Y{sub 2}O{sub 3} was 98.9% TD. The sintered density of thoria (97.8% TD) is the highest among the values reported so far, for nanocrystalline ThO{sub 2}. Characterization of the pellets and powders by using scanning electron microscopy and transmission electron microscopy reaffirmed nanocrystallinity and that the sintered pellets comprised faceted sintered grains. The two-step sintering was found to restrict “runaway” sintering. - Highlights: • Scaled-up synthesis of nanocrystalline Y{sub 2}O{sub 3} and ThO{sub 2} using citrate gel-combustion method. • VCR was observed at a fuel to nitrate ratio (R) of 0.125 and 0.17 in mixtures containing Th(NO{sub 3}){sub 4} and Y(NO{sub 3}){sub 3} respectively. • The calcined powders were compacted and sintered by using a novel two-step sintering method. • Sintered densities as high as 97.8% T.D. (ThO{sub 2}, T{sub H} = 0.48) and 98.9% T.D. (Y{sub 2}O{sub 3}, T{sub H} = 0.61) were obtained.

4th Workshop on Combinations of Intelligent Methods and Applications

CERN Document Server

Palade, Vasile; Prentzas, Jim

2016-01-01

This volume includes extended and revised versions of the papers presented at the 4th Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2014) which was intended to become a forum for exchanging experience and ideas among researchers and practitioners dealing with combinations of different intelligent methods in Artificial Intelligence. The aim is to create integrated or hybrid methods that benefit from each of their components. Some of the existing presented efforts combine soft computing methods (fuzzy logic, neural networks and genetic algorithms). Another stream of efforts integrates case-based reasoning or machine learning with soft-computing methods. Some of the combinations have been more widely explored, like neuro-symbolic methods, neuro-fuzzy methods and methods combining rule-based and case-based reasoning. CIMA 2014 was held in conjunction with the 26th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2014). .

Clinical aspects of neurodegenerative diseases - 15th HUPO BPP Workshop April 8-9, 2011, Bochum, Germany.

Science.gov (United States)

Gröttrup, Bernd; Böckmann, Miriam; Marcus, Katrin; Wiltfang, Jens; Grinberg, Lea T; Meyer, Helmut E; Park, Young M

2011-11-01

The HUPO Brain Proteome Project (HUPO BPP) held its 15th workshop in Bochum, Germany, from April 8th to 9th, 2011 directly after the Proteomic Forum 2011 in Berlin. Like on every spring workshop, the focus was more on clinical aspects, so that especially clinicians participated in this workshop. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Foregger Midget: a machine that traveled.

Science.gov (United States)

Ball, Christine M

2013-11-01

Next year marks the 100th anniversary of the founding of the Foregger Company, an important manufacturer of anesthetic equipment in the first half of the 20th century. Founded by Richard von Foregger in a barn in Long Island, New York in 1914, the Foregger Company developed equipment in collaboration with anesthesiologists. Their first product was the Gwathmey machine, built around the rudimentary flowmeter designed by the anesthesiologist, James Tayloe Gwathmey. This machine was the cornerstone of future anesthetic machine development. As the company grew, von Foregger formed other liaisons, joining forces with Ralph Waters to create the Waters to-and-fro canister for carbon dioxide absorption, and with Arthur Guedel, a variety of nontraumatic airways. The combined creativity of these three men ultimately led to the Foregger Midget. This portable machine extended the reach of the Foregger Company well beyond the shores of America, as far away as the isolated west coast of Australia.

Analysis of 8th Grade Students' Viewpoints to the Concept of Democratic Citizen through Metaphors

Directory of Open Access Journals (Sweden)

Gizem Karabulut

2017-09-01

Full Text Available In this study, it is aimed to determine the view of the 8th grade students on the concept of democratic citizens through the metaphors. In the research towards the general objective, one of the qualitative research designs phenomenology was used. The participants of the survey are 160, 8th grade students in the Körfez district of Kocaeli province in the academic year of 2016-2017. Of the 8th grade students who participated in the survey, 85 are boys and 75 are girls. Data have been reached with semi-structured forms. The metaphors and explanations written by the students were used as the basic data source in this research. Data were analyzed through content analysis. The findings from the research show that 8th grade students perceive democratic citizenship in eight categories: freedom, justice, unity and solidarity, participation, equality, patriotism, diligence and responsibility. When the opinions of the students are analyzed, it is seen that the metaphors they produce concentrate on the categories of freedom and justice. In this context, with 13 students the most widely used metaphor is “fair citizen”. Besides the students produced metaphors mostly in the category of freedom. With “tree“ and “free bird” metaphors they emphasized dimension of freedom of democratic citizenship. Students have also mentioned the distinctive characteristics of democracy, such as decision-making, election, voting, and having a saying in the country's administration when they are explaining what they do with democratic citizen.

8th Workshop on Coupled Descriptor Systems

CERN Document Server

Bartel, Andreas; Günther, Michael; Maten, E; Müller, Peter

2014-01-01

This book contains the proceedings of the 8th Workshop on Coupled Descriptor Systems held March 2013 in the Castle of Eringerfeld, Geseke in the neighborhood of Paderborn, Germany. It examines the wide range of current research topics in descriptor systems, including mathematical modeling, index analysis, wellposedness of problems, stiffness and different time-scales, cosimulation and splitting methods and convergence analysis. In addition, the book also presents applications from the automotive and circuit industries that show that descriptor systems provide challenging problems from the point of view of both theory and practice.   The book contains nine papers and is organized into three parts: control, simulation, and model order reduction. It will serve as an ideal resource for applied mathematicians and engineers, in particular those from mechanics and electromagnetics, who work with coupled differential equations.

Review of progress in quantitative nondestructive evaluation. Volume 8A and Volume 8B

International Nuclear Information System (INIS)

Thompson, D.O.; Chimenti, D.E.

1989-01-01

Volume 8 contains the edited papers presented at the 1988 Review of Progress in Quantitative Nondestructive Evaluation meeting. The 288 papers discuss such topics as fundamental techniques as acoustic testing, eddy current testing, and x-ray radiography; advanced techniques using x-ray computed tomography and laser ultrasonics; interpretive signal and image processing using expert systems and adaptive analysis; NDE probes and sensors and NDE systems and instrumentation; materials process control and inspection reliability including human factors. Materials discussed range from electronic circuit materials, coatings, adhesive bonds, smart structures, composite materials, welded joints, ferrous materials, and steels and alloys. Stress, texture, structural and fracture properties of materials are characterized using various NDE techniques. Applications to reactor, aircraft, and space vehicle components are investigated

Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

NARCIS (Netherlands)

Cordeiro, José; van Sinderen, Marten J.

2014-01-01

The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

4th Conference on Microactuators and Micromechanisms

CERN Document Server

Corves, Burkhard; Jensen, Brian; Lovasz, Erwin-Christian

2017-01-01

This book brings together investigations which combine theoretical and experimental results related to such systems as capsule micromechanisms, active micro catheters, nanotube vascular stents, mechanisms for micromilling, different compliant mechanisms including grippers and compliant systems with actuators and sensors, microrobots based on vibrations, tactile sensors, tooth brackets, compliant valves, and space reflectors. This volume contains twenty-two contributions from researchers from ten countries, represented at the 4th Conference on Microactuators and Micromechanisms, which was held in 2016 in Ilmenau, Germany. The aim of the conference was to provide a special opportunity for a know-how exchange and collaboration in various disciplines concerning systems pertaining to micro-technology. This Conference was organized under the patronage of IFToMM (International Federation for the Promotion of Mechanism and Machine Science). .

Proceedings of 8th Symposium of the Croatian Radiation Protection Association

Energy Technology Data Exchange (ETDEWEB)

Krajcar Bronic, I; Kopjar, N; Milic, M; Branica, G

2011-07-01

The 8th symposium of the Croatian Radiation Protection Association discussed the following topics: general topics; radiation dosimetry and instrumentation; public exposure; biological effects of radiation; radiation protection in medicine; radioecology and non-ionizing radiation. For each subject many investigations, experiments, examples and results are presented. International character of this symposium shows importance of these topics not only in region but world wide.

Proceedings of 8th Symposium of the Croatian Radiation Protection Association

International Nuclear Information System (INIS)

Krajcar Bronic, I.; Kopjar, N.; Milic, M.; Branica, G.

2011-01-01

The 8th symposium of the Croatian Radiation Protection Association discussed the following topics: general topics; radiation dosimetry and instrumentation; public exposure; biological effects of radiation; radiation protection in medicine; radioecology and non-ionizing radiation. For each subject many investigations, experiments, examples and results are presented. International character of this symposium shows importance of these topics not only in region but world wide.

9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 2

International Nuclear Information System (INIS)

1994-04-01

The theme of the 9th Pacific Basin Nuclear Conference held in Sydney from 1-6 May 1994, embraced the use of atom in energy production and in science and technology. The focus was on selected topics of current and on-going interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers which have been indexed separately. This document, Volume 2 covers the following topics: education and training in Nuclear Science, public acceptance, nuclear safety and radiation protection, nuclear fuel resources and their utilisation, research reactors, cyclotrons and accelerators. refs., tabs., figs., ills

78 FR 54449 - Subzone 8I, Authorization of Production Activity, Whirlpool Corporation (Washing Machines); Clyde...

Science.gov (United States)

2013-09-04

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-43-2013] Subzone 8I, Authorization of Production Activity, Whirlpool Corporation (Washing Machines); Clyde and Green Springs, Ohio On May 1, 2013, Whirlpool Corporation (Whirlpool) submitted a notification of proposed production activity to the Foreign...

8th Chinese Conference on The Semantic Web and Web Science

CERN Document Server

Du, Jianfeng; Wang, Haofen; Wang, Peng; Ji, Donghong; Pan, Jeff Z; CSWS 2014

2014-01-01

This book constitutes the thoroughly refereed papers of the 8th Chinese Conference on The Semantic Web and Web Science, CSWS 2014, held in Wuhan, China, in August 2014. The 22 research papers presented were carefully reviewed and selected from 61 submissions. The papers are organized in topical sections such as ontology reasoning and learning; semantic data generation and management; and semantic technology and applications.

Integrating Machine Learning into a Crowdsourced Model for Earthquake-Induced Damage Assessment

Science.gov (United States)

Rebbapragada, Umaa; Oommen, Thomas

2011-01-01

On January 12th, 2010, a catastrophic 7.0M earthquake devastated the country of Haiti. In the aftermath of an earthquake, it is important to rapidly assess damaged areas in order to mobilize the appropriate resources. The Haiti damage assessment effort introduced a promising model that uses crowdsourcing to map damaged areas in freely available remotely-sensed data. This paper proposes the application of machine learning methods to improve this model. Specifically, we apply work on learning from multiple, imperfect experts to the assessment of volunteer reliability, and propose the use of image segmentation to automate the detection of damaged areas. We wrap both tasks in an active learning framework in order to shift volunteer effort from mapping a full catalog of images to the generation of high-quality training data. We hypothesize that the integration of machine learning into this model improves its reliability, maintains the speed of damage assessment, and allows the model to scale to higher data volumes.

Highlights of the 8th Asia Oceania Congress of Nuclear Medicine and Biology, Beijing, China, 2004

International Nuclear Information System (INIS)

Zhu Chengmo

2005-01-01

The 8th Congress of the Asia and Oceania Confederation of Nuclear Medicine and Biology opened at the old cultural city, Beijing on 9th October 2005. The main theme of the 8th Congress was 'Progress with time - to create a brilliant future'. The congress addressed most of the current trends, developments and achievements in the field of nuclear medicine in an extremely friendly and peaceful environment. Besides the main congress, a Pre-congress colloquium in Beijing by the World Radiopharmaceutical Therapy Council (on 9 October), and two post-congress Satellite meetings at Shanghai and Hong Kong on 15 and 17 October respectively were organized in conjunction with the 8th congress. One of the major achievements of the congress was a record number of 58 invited lectures delivered by a galaxy of internationally reputed professionals in nuclear medicine and allied sciences. Four hundred and fifty-six (456) participants, 230 of them from China and 226 from another 33 countries of Asia and from around the rest of the world; 23 exhibitors representing manufacturers and producers of nuclear medicine equipment, radiopharmaceuticals and consumables, participated in the congress. A total of 384 abstracts were received for presentation from 36 countries, 141 for oral and 243 for poster presentation. Majority of the abstracts came from Asia; significant numbers came from Australia, Europe and North America. The distribution of abstracts in terms of the topics is given. The most popular subject was nuclear oncology, followed by general nuclear medicine, nuclear cardiology, radionuclide therapy, nuclear neurology and radiopharmacy. As compared to the presentations at the 7th AOCNMB; it was observed that there has been increases in presentations on topic related to nuclear oncology, radionuclide therapy, basic nuclear medicine, radiopharmacy and instrumentation at the 8th Congress; whereas significant reduction was observed in the number of presentations related to general nuclear

9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 1

International Nuclear Information System (INIS)

1994-04-01

The theme of the 9th Pacific Basin Nuclear conference held in Sydney from 1-6 May 1994, embraced the use of the atom in energy production and in science and technology. The focus was on selected topics of current and ongoing interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers. They have been indexed separately. This document, Volume 1 covers the following topics: Pacific partnership; perspectives on nuclear energy, science and technology in Pacific Basin countries; nuclear energy and sustainable development; economics of the power reactors; new power reactor projects; power reactor technology; advanced reactors; radioisotope and radiation technology; biomedical applications

SU-C-BRA-05: Delineating High-Dose Clinical Target Volumes for Head and Neck Tumors Using Machine Learning Algorithms

Energy Technology Data Exchange (ETDEWEB)

Cardenas, C [Department of Radiation Physics, The University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); The University of Texas Graduate School of Biomedical Sciences, Houston, TX (United States); Wong, A [Department of Radiation Oncology, The University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); School of Medicine, The University of Texas Health Sciences Center at San Antonio, San Antonio, TX (United States); Mohamed, A; Fuller, C [Department of Radiation Oncology, The University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Yang, J; Court, L; Aristophanous, M [Department of Radiation Physics, The University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Rao, A [Department of Bioinformatics and Computational Biology, The University of Texas M.D. Anderson Cancer Center, Houston, TX (United States)

2016-06-15

Purpose: To develop and test population-based machine learning algorithms for delineating high-dose clinical target volumes (CTVs) in H&N tumors. Automating and standardizing the contouring of CTVs can reduce both physician contouring time and inter-physician variability, which is one of the largest sources of uncertainty in H&N radiotherapy. Methods: Twenty-five node-negative patients treated with definitive radiotherapy were selected (6 right base of tongue, 11 left and 9 right tonsil). All patients had GTV and CTVs manually contoured by an experienced radiation oncologist prior to treatment. This contouring process, which is driven by anatomical, pathological, and patient specific information, typically results in non-uniform margin expansions about the GTV. Therefore, we tested two methods to delineate high-dose CTV given a manually-contoured GTV: (1) regression-support vector machines(SVM) and (2) classification-SVM. These models were trained and tested on each patient group using leave-one-out cross-validation. The volume difference(VD) and Dice similarity coefficient(DSC) between the manual and auto-contoured CTV were calculated to evaluate the results. Distances from GTV-to-CTV were computed about each patient’s GTV and these distances, in addition to distances from GTV to surrounding anatomy in the expansion direction, were utilized in the regression-SVM method. The classification-SVM method used categorical voxel-information (GTV, selected anatomical structures, else) from a 3×3×3cm3 ROI centered about the voxel to classify voxels as CTV. Results: Volumes for the auto-contoured CTVs ranged from 17.1 to 149.1cc and 17.4 to 151.9cc; the average(range) VD between manual and auto-contoured CTV were 0.93 (0.48–1.59) and 1.16(0.48–1.97); while average(range) DSC values were 0.75(0.59–0.88) and 0.74(0.59–0.81) for the regression-SVM and classification-SVM methods, respectively. Conclusion: We developed two novel machine learning methods to delineate

SU-C-BRA-05: Delineating High-Dose Clinical Target Volumes for Head and Neck Tumors Using Machine Learning Algorithms

International Nuclear Information System (INIS)

Cardenas, C; Wong, A; Mohamed, A; Fuller, C; Yang, J; Court, L; Aristophanous, M; Rao, A

2016-01-01

Purpose: To develop and test population-based machine learning algorithms for delineating high-dose clinical target volumes (CTVs) in H&N tumors. Automating and standardizing the contouring of CTVs can reduce both physician contouring time and inter-physician variability, which is one of the largest sources of uncertainty in H&N radiotherapy. Methods: Twenty-five node-negative patients treated with definitive radiotherapy were selected (6 right base of tongue, 11 left and 9 right tonsil). All patients had GTV and CTVs manually contoured by an experienced radiation oncologist prior to treatment. This contouring process, which is driven by anatomical, pathological, and patient specific information, typically results in non-uniform margin expansions about the GTV. Therefore, we tested two methods to delineate high-dose CTV given a manually-contoured GTV: (1) regression-support vector machines(SVM) and (2) classification-SVM. These models were trained and tested on each patient group using leave-one-out cross-validation. The volume difference(VD) and Dice similarity coefficient(DSC) between the manual and auto-contoured CTV were calculated to evaluate the results. Distances from GTV-to-CTV were computed about each patient’s GTV and these distances, in addition to distances from GTV to surrounding anatomy in the expansion direction, were utilized in the regression-SVM method. The classification-SVM method used categorical voxel-information (GTV, selected anatomical structures, else) from a 3×3×3cm3 ROI centered about the voxel to classify voxels as CTV. Results: Volumes for the auto-contoured CTVs ranged from 17.1 to 149.1cc and 17.4 to 151.9cc; the average(range) VD between manual and auto-contoured CTV were 0.93 (0.48–1.59) and 1.16(0.48–1.97); while average(range) DSC values were 0.75(0.59–0.88) and 0.74(0.59–0.81) for the regression-SVM and classification-SVM methods, respectively. Conclusion: We developed two novel machine learning methods to delineate

Allelic Variation at the Rht8 Locus in a 19th Century Wheat Collection

Directory of Open Access Journals (Sweden)

Linnéa Asplund

2012-01-01

Full Text Available Wheat breeding during the 20th century has put large efforts into reducing straw length and increasing harvest index. In the 1920s an allele of Rht8 with dwarfing effects, found in the Japanese cultivar “Akakomugi,” was bred into European cultivars and subsequently spread over the world. Rht8 has not been cloned, but the microsatellite marker WMS261 has been shown to be closely linked to it and is commonly used for genotyping Rht8. The “Akakomugi” allele is strongly associated with WMS261-192bp. Numerous screens of wheat cultivars with different geographical origin have been performed to study the spread and influence of the WMS261-192bp during 20th century plant breeding. However, the allelic diversity of WMS261 in wheat cultivars before modern plant breeding and introduction of the Japanese dwarfing genes is largely unknown. Here, we report a study of WMS261 allelic diversity in a historical wheat collection from 1865 representing worldwide major wheats at the time. The majority carried the previously reported 164 bp or 174 bp allele, but with little geographical correlation. In a few lines, a rare 182 bp fragment was found. Although straw length was recognized as an important character already in the 19th century, Rht8 probably played a minor role for height variation. The use of WMS261 and other functional markers for analyses of historical specimens and characterization of historic crop traits is discussed.

Challenging a dogma; AJCC 8th staging system is not sufficient to predict outcomes of patients with malignant pleural mesothelioma.

Science.gov (United States)

Abdel-Rahman, Omar

2017-11-01

The 8th edition of malignant pleural mesothelioma (MPM) American Joint Committee on Cancer (AJCC) staging system has been published. The current analysis aims to evaluate its performance in a population-based setting among patients recorded within the surveillance, epidemiology and end results (SEER) database. SEER database (2004-2013) has been accessed through SEER*Stat program and AJCC 8th edition stage groups were reconstructed. Survival analyses (overall and cancer-specific) were conducted according to 6th and 8th editions through Kaplan-Meier analysis. Cox-regression multivariate model was also utilized for pair wise comparisons between different prognostic groups for overall and cancer-specific survival. A total of 5382 patients with MPM were identified in the period from 2004 to 2013. According to the 6th edition, significant pair wise P values for overall survival included: IA vs. III (P=0.027); IA vs. IV: P<0.0001; IB vs. IV: P<0.0001; II vs. III: P<0.0001; II vs. IV: P<0.0001; III vs. IV: P<0.0001). According to the 8th edition, significant pair wise P values for overall survival included: all stages vs. IV: P<0.0001; IA vs. II: P=0.046; IA vs. IIIA: P=0.022; IA vs. IIIB: P <0.0001; IB vs. II: P<0.0001; IB vs. IIIB: P<0.0001; II vs. IIIA: P<0.0001; IIIA vs. IIIB: P<0.0001). C-index for 6th edition was 0.539 (SE: 0.008; 95% CI: 0.524-0.555); while C-index for 8th edition was 0.540 (SE: 0.008; 95% CI: 0.525-0.556). Based on the above findings, a simplified staging system was proposed and overall and cancer-specific survivals were evaluated according to the simplified system. For overall and cancer-specific survival assessment, P values for all pair wise comparisons among different stages were significant (<0.01). The prognostic performance of both the 6th and 8th AJCC editions is unsatisfactory; there is a need for a more practical and prognostically relevant staging system for MPM. Copyright © 2017 Elsevier B.V. All rights reserved.

SAPHIRE 8 Volume 2 - Technical Reference

Energy Technology Data Exchange (ETDEWEB)

C. L. Smith; S. T. Wood; W. J. Galyean; J. A. Schroeder; M. B. Sattison

2011-03-01

The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of computer programs that were developed to create and analyze probabilistic risk assessment (PRAs). Herein information is provided on the principles used in the construction and operation of Version 8.0 of the SAPHIRE system. This report summarizes the fundamental mathematical concepts of sets and logic, fault trees, and probability. This volume then describes the algorithms used to construct a fault tree and to obtain the minimal cut sets. It gives the formulas used to obtain the probability of the top event from the minimal cut sets, and the formulas for probabilities that apply for various assumptions concerning reparability and mission time. It defines the measures of basic event importance that SAPHIRE can calculate. This volume gives an overview of uncertainty analysis using simple Monte Carlo sampling or Latin Hypercube sampling, and states the algorithms used by this program to generate random basic event probabilities from various distributions. Also covered are enhance capabilities such as seismic analysis, Workspace algorithms, cut set "recovery," end state manipulation, and use of "compound events."

25th Annual International Symposium on Field-Programmable Custom Computing Machines

CERN Document Server

The IEEE Symposium on Field-Programmable Custom Computing Machines is the original and premier forum for presenting and discussing new research related to computing that exploits the unique features and capabilities of FPGAs and other reconfigurable hardware. Over the past two decades, FCCM has been the place to present papers on architectures, tools, and programming models for field-programmable custom computing machines as well as applications that use such systems.

Improved fabrication of HgI2 nuclear radiation detectors by machine-cleaving

International Nuclear Information System (INIS)

Levi, A.; Burger, A.; Schieber, M.; Vandenberg, L.; Yellon, W.B.; Alkire, R.W.

1982-01-01

The perfection of machine-cleaved sections from HgI 2 bulk crystals was examined. The perfection of the machine-cleaved sections as established by gamma diffraction rocking curves was found to be much better than the perfection of hand-cleaved sections or as grown thin platelets, reaching a perfection similar to that of the wire-sawn sections of HgI 2 . A correlation between the perfection and the thickness of the machine-cleaved section was also found, i.e., the thicker the cleaved-section the more perfect it is. The reproducibility of the fabrication was significantly improved by using machine cleaving in the process of fabrication. Large single crystals of HgI 2 weighing 20 to 200 g, can be grown from the vapor phase using the TOM Technique. In order to fabricate nuclear radiation detectors from these single crystals, thin sections of about 0.4 to 0.8 mm thickness have to be prepared. Up till now, the state-of-the-art of fabricating HgI 2 nuclear radiation detectors involved two methods to get thin sections from the large single crystals: (1) hand-cleaving using a razor-blade and (2) solution wire sawing. The chemical wire sawing method involves a loss of about 50% of the crystal volume and is usually followed by a chemical polishing process which involves a significant loss of volume of the original volume. This procedure is complicated and wasteful. The traditional fabrication method, i.e., hand-cleaving followed by rapid nonselective chemical etching, is simpler and less wasteful

Sixth international conference on electrical machines and drives

International Nuclear Information System (INIS)

1993-01-01

This volume contains 111 papers presented at the Sixth International Conference on Electrical Machines and Drives. The topics covered include: miniature and micro motors; induction motors; DC machines; reluctance motors; condition monitoring; synchronous machines and drives; induction machines; induction generators; simulation; design; and operating experience; linear machines; noise and vibration; special machines. Separate abstracts have been prepared for a paper on linear step motors for control rod drives and for a paper on a motor drive for gas filtration in gas-cooled reactors. (UK)

Report from the 5th Workshop on Extremely Large Databases

Directory of Open Access Journals (Sweden)

Jacek Becla

2012-03-01

Full Text Available The 5th XLDB workshop brought together scientific and industrial users, developers, and researchers of extremely large data and focused on emerging challenges in the healthcare and genomics communities, spreadsheet-based large scale analysis, and challenges in applying statistics to large scale analysis, including machine learning. Major problems discussed were the lack of scalable applications, the lack of expertise in developing solutions, the lack of respect for or attention to big data problems, data volume growth exceeding Moore's Law, poorly scaling algorithms, and poor data quality and integration. More communication between users, developers, and researchers is sorely needed. A variety of future work to help all three groups was discussed, ranging from collecting challenge problems to connecting with particular industrial or academic sectors.

8th Workshop on Hadron Physics in China and Opportunities Worldwide

CERN Document Server

2016-01-01

Hadron Physics has drawn great interests from the Chinese nuclear and high-energy physics communities and has been one of the main research areas at major accelerator facilities in China. At the same time, the Chinese collaborations are playing increasingly important roles at international hadron physics facilities (Jefferson Lab, RHIC, COMPASS@CERN, J-PARC, …), in particular, at the recently upgraded 12 GeV-energy Jefferson Lab in US, which will provide a broad range of opportunities for frontier research in hadronic physics. Furthermore, the U.S. 2015 long range plan for nuclear science recommended Electron-Ion Colliders (EIC), as the highest priority for new facility construction after the completion of the FRIB as the next frontier for QCD physics. In China, an EIC@HIAF facility has been proposed by the Institute of Modern Physics of the Chinese Academy of Sciences to provide a powerful precision microscope for hadron physics study. In light of these new developments, the 8th workshop will be held at th...

Machine Translation - A Gentle Introduction

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 7. Machine Translation - A Gentle Introduction. Durgesh D Rao. General Article Volume 3 Issue 7 July 1998 pp 61-70. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/003/07/0061-0070 ...

Evaluation of the 8th AJCC staging system for pathologically versus clinically staged pancreatic adenocarcinoma: A time to revisit a dogma?

Science.gov (United States)

Abdel-Rahman, Omar

2018-02-01

The 8th edition of the American Joint Committee on Cancer (AJCC) staging system for pancreatic exocrine adenocarcinoma has been released. The current study seeks to assess the 7th and 8th editions among patients registered within the surveillance, epidemiology and end results (SEER) database. SEER database (2010-2013) has been accessed through SEER*Stat program and AJCC 8th edition stages were reconstructed utilizing the collaborative stage descriptions. Kaplan-Meier analysis of overall survival and pancreatic cancer-specific survival analyses (according to both 7th and 8th editions and according to whether pathological or clinical staging were conducted) has been performed. Multivariate analysis of factors affecting pancreatic cancer-specific survival was also conducted through a Cox proportional hazard model. A total of 18  948 patients with pancreatic adenocarcinoma were identified in the period from 2010-2013. Pancreatic cancer-specific survival among pathologically staged patients and according to the 8th edition showed significant differences for all pair wise comparisons among different stages (P < 0.0001) except for the comparison between stage IA and stage IB (P = 0.307) and the comparison between stage IB and stage IIA (P = 0.116). Moreover, P value for stage IA vs IIA was 0.014; while pancreatic cancer-specific survival according to the 7th edition among pathologically staged patients showed significant differences for all pair wise comparisons among different stages (P < 0.0001) except for the comparison between IA and IB (P = 0.072), the comparison between stage IIA and stage IIB (P = 0.065), the comparison between stage IIA and stage III (P = 0.059) and the comparison between IIB and III (P = 0.595). Among clinically staged patients (i.e. those who did not undergo initial radical surgery), the prognostic performance of both 7th and 8th stages for both overall survival and pancreatic cancer-specific survival was

Machine Shop. Module 8: CNC (Computerized Numerical Control). Instructor's Guide.

Science.gov (United States)

Crosswhite, Dwight

This document consists of materials for a five-unit course on the following topics: (1) safety guidelines; (2) coordinates and dimensions; (3) numerical control math; (4) programming for numerical control machines; and (5) setting and operating the numerical control machine. The instructor's guide begins with a list of competencies covered in the…

Effect of 8 weeks of free-weight and machine-based strength training on strength and power performance

OpenAIRE

Wirth Klaus; Keiner Michael; Hartmann Hagen; Sander Andre; Mickel Christoph

2016-01-01

Abstract The aim of this study was to evaluate the effectiveness of free-weight and machine-based exercises to increase different strength and speed-strength variables. One hundred twenty male participants (age: 23.8 ? 2.5 years; body height: 181.0 ? 6.8 cm; body mass: 80.2 ? 8.9 kg) joined the study. The 2 experimental groups completed an 8 week periodized strength training program that included 2 training sessions per week. The exercises that were used in the strength training programs were...

PREFACE: The 8th China International NanoScience and Technology Symposium

Science.gov (United States)

Cong, Hailin

2009-09-01

The 8th China International NanoScience and Technology Symposium, Xiangtan (2009) - Nano-products Exposition, sponsored by Chinese Society of Miro-nanoTechnology and IEEE Nanotechnology Council, etc will be held on 23-27 October 2009 in Xiangtan, China. This symposium is held in order to promote the technology for the development of micro- and nano-scale, cross-scale integration, to share new micro/nano technologies, to exchange information and knowledge over all fields and promote the industrialization and development of nanotechnology. This is a leading professional and traditional conference with at least 400 participants every year. Famous experts, professors and government officials at home and abroad will give lectures during the symposium, which provides a good platform for delegates to discover the latest developments and dynamics of nanotechnology. Researchers, teachers and students in colleges, and technical personnel in the industrial community are welcome to contribute and actively participate in the symposium. In our last symposium held in 2008, over 600 participants from all over the world attended, and we received over 570 abstract and paper submissions for the proceedings published in different languages in famous professional journals. And this year, we have already received over 400 submissions. After strict peer review, 60 of them are published in this volume of Journal of Physics: Conference Series. We are confident that the event will be even more successful this year. Consequently, the organizing committee and proceedings editorial committee would like to thank our colleagues at the IOP Publishing, the invited speakers, our sponsors and all the delegates for their great contributions in this conference. Hailin Cong Vice Chair of the proceedings editorial committee

Comparative Study of Media Use Capacity for 8th Grade Students

OpenAIRE

川上, 善郎; 鈴木, 裕久

1996-01-01

　The world is experiencing a variety of changes resulting from the widespread diffusion of information technology. It is very important to measure the information literacy which allows people to access or to use various information media including computers or wordprocessors.　The purpose of this paper is to measure and compare the media use capacity of 8th grade students in Japan, Taiwan and the United States. Specifically,　1. to determine media availability, media knowledge, media skills and...

Mi Primer Libro de Maquinas Simples: Trabajo y Fuerza. Escuela Intermedia Grados 7, 8 y 9 (My First Book of Simple Machines: Work and Force. Intermediate School Grades 7, 8, and 9).

Science.gov (United States)

Alvarado, Patricio R.; Montalvo, Luis

This is the first book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume defines force and work by suggesting experiments and posing questions concerning drawings in the book which illustrate scientific principles. Answers to the questions are provided;…

8th International Workshop on Information Filtering and Retrieval

CERN Document Server

Giuliani, Alessandro; Semeraro, Giovanni

2017-01-01

This book focuses on new research challenges in intelligent information filtering and retrieval. It collects invited chapters and extended research contributions from DART 2014 (the 8th International Workshop on Information Filtering and Retrieval), held in Pisa (Italy), on December 10, 2014, and co-hosted with the XIII AI*IA Symposium on Artificial Intelligence. The main focus of DART was to discuss and compare suitable novel solutions based on intelligent techniques and applied to real-world contexts. The chapters of this book present a comprehensive review of related works and the current state of the art. The contributions from both practitioners and researchers have been carefully reviewed by experts in the area, who also gave useful suggestions to improve the quality of the book.

Machine learning for adaptive many-core machines a practical approach

CERN Document Server

Lopes, Noel

2015-01-01

The overwhelming data produced everyday and the increasing performance and cost requirements of applications?are transversal to a wide range of activities in society, from science to industry. In particular, the magnitude and complexity of the tasks that Machine Learning (ML) algorithms have to solve are driving the need to devise adaptive many-core machines that scale well with the volume of data, or in other words, can handle Big Data.This book gives a concise view on how to extend the applicability of well-known ML algorithms in Graphics Processing Unit (GPU) with data scalability in mind.

The effect of abrading and cutting instruments on machinability of dental ceramics.

Science.gov (United States)

Sakoda, Satoshi; Nakao, Noriko; Watanabe, Ikuya

2018-03-16

The aim was to investigate the effect of machining instruments on machinability of dental ceramics. Four dental ceramics, including two zirconia ceramics were machined by three types (SiC, diamond vitrified, and diamond sintered) of wheels with a hand-piece engine and two types (diamond and carbide) of burs with a high-speed air turbine. The machining conditions used were abrading speeds of 10,000 and 15,000 r.p.m. with abrading force of 100 gf for the hand-piece engine, and a pressure of 200 kPa and a cutting force of 80 gf for the air-turbine hand-piece. The machinability efficiency was evaluated by volume losses after machining the ceramics. A high-abrading speed had high-abrading efficiency (high-volume loss) compared to low-abrading speed in all abrading instruments used. The diamond vitrified wheels demonstrated higher volume loss for two zirconia ceramics than those of SiC and diamond sintered wheels. When the high-speed air-turbine instruments were used, the diamond points showed higher volume losses compared to the carbide burs for one ceramic and two zirconia ceramics with high-mechanical properties. The results of this study indicated that the machinability of dental ceramics depends on the mechanical and physical properties of dental ceramics and machining instruments. The abrading wheels show autogenous action of abrasive grains, in which ground abrasive grains drop out from the binder during abrasion, then the binder follow to wear out, subsequently new abrasive grains come out onto the instrument surface (autogenous action) and increase the grinding amount (volume loss) of grinding materials.

System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

Energy Technology Data Exchange (ETDEWEB)

1990-12-21

This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

RNA Polymerase II–The Transcription Machine

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 3. RNA Polymerase II – The Transcription Machine - Nobel Prize in Chemistry 2006. Jiyoti Verma Aruna Naorem Anand Kumar Manimala Sen Parag Sadhale. General Article Volume 12 Issue 3 March 2007 pp 47-53 ...

8th International Conference on Robotic, Vision, Signal Processing & Power Applications

CERN Document Server

Mustaffa, Mohd

2014-01-01

The proceeding is a collection of research papers presented, at the 8th International Conference on Robotics, Vision, Signal Processing and Power Applications (ROVISP 2013), by researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe. The topics of interest are as follows but are not limited to: • Robotics, Control, Mechatronics and Automation • Vision, Image, and Signal Processing • Artificial Intelligence and Computer Applications • Electronic Design and Applications • Telecommunication Systems and Applications • Power System and Industrial Applications  

Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

Science.gov (United States)

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

Proceedings of the Conference of the International Group for the Psychology of Mathematics Education (29th, Melbourne, Australia, July 10-15, 2005). Volume 1

Science.gov (United States)

Chick, Helen L., Ed.; Vincent, Jill L., Ed.

2005-01-01

The first volume of the 29th annual conference of the International Group for the Psychology of Mathematics Education contains plenary lecture and research forum papers as listed below. Short oral communications papers, poster presentations, brief summaries of discussion groups, and working sessions are also included in the volume. The plenary…

Simultaneous detection of decidual Th1/Th2 and NK1/NK2 immunophenotyping in unknown recurrent miscarriage using 8-color flow cytometry with FSC/Vt extended strategy.

Science.gov (United States)

Dong, Peng; Wen, Xi; Liu, Jia; Yan, Cui-Yan; Yuan, Jing; Luo, Lan-Rong; Hu, Qiao-Fei; Li, Jian

2017-06-30

Th1/Th2 imbalance is considered as a mechanism for recurrent miscarriage. The NK1/NK2 paradigm is hypothesised to play an important role in pregnancy. However, few results showed simultaneous changes of these subsets in vivo in decidual tissues. The present study aimed to detect the decidual mononuclear cells (dMo), and the Th1/Th2, and NK1/NK2 paradigm simultaneously using multiparametric flow cytometry (MFC) in unexplained recurrent miscarriages (URM). Mononuclear cells were isolated from the decidual tissues of URM cases and early pregnant women. The mononuclear cell percent was demonstrated by detecting the expression of CD3, CD4, CD8, CD56, and CD16 extracellular markers, interferon (IFN)-γ, and interleukin (IL)-4 intracellular markers in live cells using 8-color flow cytometry with forward scatter (FSC)/side scatter (SSC) and FSC/viability (Vt) initial gating strategies, and the ratios of Th1/Th2 and decidual NK1 (dNK1)/decidual NK2 (dNK2) cells were compared between the subject groups. Two initial gating strategies of the FSC/SSC or FSC/Vt, with central or extended gating scales, were adapted, and there was no main effect or interaction for the cell proportions, except for the type 1 and type 2 subsets in the FSC/Vt extended gating strategy. There was no significant difference of the proportions of the decidual T, dNK, NKT-like, Th, and Tc cells between the two groups. However, the Th1/Th2 and dNK1/dNK2 ratios in the URM patients were higher compared with the normal group when using the FSC/Vt extended gating strategy. The present study provides means to detect Th1/Th2 and dNK1/dNK2 simultaneously in URM patients for large sample investigations in the future. © 2017 The Author(s).

20th Annual Systems Engineering Conference, Thursday, Volume 4

Science.gov (United States)

2017-10-26

20th Annual Systems Engineering Conference October 23-26, 2017 | Waterford at Springfield | Springfield, VA NDIA.org/systemsengineering...Conference Program SYSTEMS ENGINEERING CONFERENCE 2 Welcome to the NDIA Systems Engineering Conference On behalf of the National Defense Industrial...Association’s Systems Engineering Division, I would like to extend a very warm welcome to the 20th Annual Systems Engineering Conference. Yes, the 20th Annual

PREFACE: 8th Asian International Seminar on Atomic and Molecular Physics (AISAMP)

Science.gov (United States)

Williams, Jim F.; Buckman, Steve; Bieske, Evan J.

2009-09-01

These proceedings arose from the 8th Asian International Seminar on Atomic and Molecular Physics (AISAMP) which was held at the University of Western Australia 24-28 November 2008. The history of AISAMP (Takayanagi and Matsuzawa 2002) recognizes its origin from the Japan-China meeting of 1985, and the first use of the name 'The First Asian International Seminar on Atomic and Molecular Physics (AISAMP)' in 1992. The initial attendees, Japan and China, were joined subsequently by scientists from Korea, Taiwan, India, Australia and recently by Malaysia, Thailand, Vietnam, Turkey Iran, UK and USA. The main purpose of the biennial AISAMP series is to create a wide forum for exchanging ideas and information among atomic and molecular scientists and to promote international collaboration. The scope of the AISAMP8 meeting included pure, strategic and applied research involving atomic and molecular structure and processes in all forms of matter and antimatter. For 2008 the AISAMP conference incorporated the Australian Atomic and Molecular Physics and Quantum Chemistry meeting. The topics for AISAMP8 embraced themes from earlier AISAMP meetings and reflected new interests, in atomic and molecular structures, spectroscopy and collisions; atomic and molecular physics with laser or synchrotron radiation; quantum information processing using atoms and molecules; atoms and molecules in surface physics, nanotechnology, biophysics, atmospheric physics and other interdisciplinary studies. The implementation of the AISAMP themes, as well as the international representation of research interests, is indicated both in the contents list of these published manuscripts as well as in the program for the meeting. Altogether, 184 presentations were made at the 8th AISAMP, including Invited Talks and Contributed Poster Presentations, of which 60 appear in the present Proceedings after review by expert referees in accordance with the usual practice of Journal of Physics: Conference Series of

The 8th edition of the American Joint Committee on Cancer tumor-node-metastasis staging system for gastric cancer is superior to the 7th edition: results from a Chinese mono-institutional study of 1663 patients.

Science.gov (United States)

Ji, Xin; Bu, Zhao-De; Yan, Yan; Li, Zi-Yu; Wu, Ai-Wen; Zhang, Lian-Hai; Zhang, Ji; Wu, Xiao-Jiang; Zong, Xiang-Long; Li, Shuang-Xi; Shan, Fei; Jia, Zi-Yu; Ji, Jia-Fu

2017-11-22

We investigated the superiority of the 8th edition of the tumor-node-metastasis (TNM) system for patients in China with gastric cancer. The survival outcomes of 1663 patients with gastric cancer undergoing radical resection were analyzed. In the 8th edition system, homogeneous 5-year survival rates among different pathological TNM (pTNM) categories belonging to the same stage were observed. However, in the 7th edition system, the differences of 5-year survival rate among pTNM categories belonging to the same stage were observed in stages IIB (P = 0.010), IIIB (P = 0.004), and IIIC (P < 0.001). For patients in the pT1-3 (P < 0.001) and pT4a (P < 0.001) categories, there were significant differences in survival between patients in the pN3a and pN3b categories. Furthermore, partial cases (pT4bN0M0/T4aN2M0) of stage IIIB were downstaged to stage IIIA in the 8th edition system, and the 5-year survival rate of these patients was significantly better than that of patients in stage IIIB in the 8th edition system. Similarly, the 5-year survival rate of patients in p4bN2M0/T4aN3aM0 downstaged from stage IIIC to IIIB was significantly better than that of patients in stage IIIC. Compared with the 7th edition system, the 8th edition system had a higher likelihood ratio and linear trend chi-squared score and a smaller Akaike information criteria value. The 8th edition system is superior to the 7th edition system in terms of homogeneity, discriminatory ability, and monotonicity of gradients for Chinese patients with gastric cancer.

8th International Workshop on Top Quark Physics

CERN Document Server

2015-01-01

This workshop, at its 8th edition, will bring together the community of experimental and theoretical physicists working on top quark physics, 20 years after its first discovery, and at the beginning of the exploration of the new energy regime at the Large Hadron Collider. The workshop will provide a comprehensive overview of the latest results from the LHC and Tevatron experiments as well as the most recent theoretical developments and an outlook on top-quark physics at future colliders. The programme will consist of plenary presentations, a poster session and 'question and answers' sessions, targeted for young researchers. A significant fraction of the workshop time will be devoted to discussions. The goal of the workshop is to provide a comprehensive picture of top-quark physics and a forum where experimentalists and theorists can discuss the interpretation of top quark results and plan future measurements. The venue will take place in the Hotel Continental Terme, Ischia, the largest island in the bay of Na...

8th International Workshop on Non-Monotonic Reasoning

CERN Document Server

Truszczynski, Mirek

2000-01-01

The papers gathered in this collection were presented at the 8th International Workshop on Nonmonotonic Reasoning, NMR2000. The series was started by John McCarthy in 1978. The first international NMR workshop was held at Mohonk Mountain House, New Paltz, New York in June, 1984, and was organized by Ray Reiter and Bonnie Webber. In the last 10 years the area of nonmonotonic reasoning has seen a number of important developments. Significant theoretical advances were made in the understanding of general abstract principles underlying nonmonotonicity. Key results on the expressibility and computational complexity of nonmonotonic logics were established. The role of nonmonotonic reasoning in belief revision, abduction, reasoning about action, planing and uncertainty was further clarified. Several successful NMR systems were built and used in applications such as planning, scheduling, logic programming and constraint satisfaction. The papers in the proceedings reflect these recent advances in the field. They are g...

Machine shop basics

CERN Document Server

Miller, Rex

2004-01-01

Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

Fast Food Consumption and Food Prices: Evidence from Panel Data on 5th and 8th Grade Children

Directory of Open Access Journals (Sweden)

Tamkeen Khan

2012-01-01

Full Text Available Fast food consumption is a dietary factor associated with higher prevalence of childhood obesity in the United States. The association between food prices and consumption of fast food among 5th and 8th graders was examined using individual-level random effects models utilizing consumption data from the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K, price data from American Chamber of Commerce Researchers Association (ACCRA, and contextual outlet density data from Dun and Bradstreet (D&B. The results found that contextual factors including the price of fast food, median household income, and fast food restaurant outlet densities were significantly associated with fast food consumption patterns among this age group. Overall, a 10% increase in the price of fast food was associated with 5.7% lower frequency of weekly fast food consumption. These results suggest that public health policy pricing instruments such as taxes may be effective in reducing consumption of energy-dense foods and possibly reducing the prevalence of overweight and obesity among US children and young adolescents.

Surface mining machines problems of maintenance and modernization

CERN Document Server

Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

2017-01-01

This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

Proceedings of the 8th Japan-China bilateral symposium on radiation chemistry

Energy Technology Data Exchange (ETDEWEB)

Yamaoka, Hitoshi; Hase, Hirotomo; Makuuchi, Keizou [eds.

2000-03-01

This issue is the collection of papers presented at The 8th Japan-China Bilateral Symposium on Radiation Chemistry held on October 25-29, 1999 at Kyodai Kaikan in Kyoto. The total number of the contributed papers is 69 which consists of 41 and 28 papers for oral and poster presentations, respectively. The papers presented are classified into five categories: A: Radiation Chemistry - Fundament (21 papers), B: Radiation Chemistry - Polymer (10 papers), C: Radiation Chemistry - Biological System (8 papers), D: Radiation Processing (19 papers), and E: Advanced Radiation Chemistry - Ion Beams and Positron (11 papers). The output of the Symposium and the history of the Bilateral Symposium were compiled in the Closing. (J.P.N.)

Art in the Age of Machine Intelligence

Directory of Open Access Journals (Sweden)

Blaise Agüera y Arcas

2017-09-01

Full Text Available In this wide‐ranging essay, the leader of Google’s Seattle AI group and founder of the Artists and Machine Intelligence program discusses the long‐standing and complex relationship between art and technology. The transformation of artistic practice and theory that attended the 19th century photographic revolution is explored as a parallel for the current revolution in machine intelligence, which promises not only to mechanize (or democratize the means of reproduction, but also of production.

An Application of Cognitive Diagnostic Assessment on TIMMS-2007 8th Grade Mathematics Items

Science.gov (United States)

Toker, Turker; Green, Kathy

2012-01-01

The least squares distance method (LSDM) was used in a cognitive diagnostic analysis of TIMSS (Trends in International Mathematics and Science Study) items administered to 4,498 8th-grade students from seven geographical regions of Turkey, extending analysis of attributes from content to process and skill attributes. Logit item positions were…

Development of a Scale to Explore Technology Literacy Skills of Turkish 8th Graders

Science.gov (United States)

Misirli, Zeynel A.; Akbulut, Yavuz

2013-01-01

The use of emerging technologies shape learners' knowledge creation and transformation processes. In this regard, this study aimed to develop a scale to investigate 8 th graders' competencies regarding the educational technology standards based on ISTE-NETS. After a review of relevant literature, an item pool was prepared. The pool was improved…

8th year of the MEFANET conference: virtual reality is breaking down barriers

Directory of Open Access Journals (Sweden)

Jakub Gregor

2015-09-01

Full Text Available With a slight overstatement, one could say that the 8th year of the MEFANET conference reached boundaries of the solar system, which can boast eight planets. In reality, ambitions of the Czech-Slovak cooperation in the area of medical education are more modest, but this year’s programme has demonstrated that the international cooperation surely extends beyond the former federal boundary of Czechoslovakia.

Coordination polyhedra ThOn in crystal structure

International Nuclear Information System (INIS)

Shevchenko, A.P.; Serezhkin, V.N.; Mikhajlov, Yu.N.

2000-01-01

The environment peculiarities of Th(4) 107 atoms in 93 oxygen-containing compounds were studied using the Voronoi-Dirichlet (VD) polyhedrons. It was determined that in case of high coordination number (CN ≥ 6) of thorium atoms the volume of their VD polyhedrons did not practically depend on CN Th and constituted 11.9 (4) A 3 . The volume of the classical coordination polyhedrons, namely, ThO n , ZrO n and U 4 O n ones, was determined to depend linearly on the coordination number. It was shown that in case CN [ru

stepping motor - hydraulic motor servo drives for an nc milling machine

African Journals Online (AJOL)

Dr Obe

stepping motor Drive Assembly especially Designed for CNC systems". 13th Machine Tool Design and. Research. (MTDR) conference,. University of Birmingham, 1972. 2 Ertongur, N.A. "Investigation into the instability in an electro hydraulic control system for machine tools" Ph.D. Thesis, University of. Birmingham, UK. 1966 ...

8th conference on Ultra-Wideband Short-Pulse Electromagnetics

CERN Document Server

Tyo, J. Scott; Baum, Carl E; Ultra-Wideband Short-Pulse Electromagnetics 8; UWBSP8

2007-01-01

The purpose of the Ultra-Wideband Short-Pulse Electromagnetics Conference series is to focus on advanced technologies for the generation, radiation and detection of ultra-wideband short pulse signals, taking into account their propagation and scattering from and coupling to targets of interest. This Conference series reports on developments in supporting mathematical and numerical methods and presents current and potential future applications of the technology. Ultra-Wideband Short-Pulse Electromagnetics 8 is based on the American Electromagnetics 2006 conference held from June 3-7 in Albuquerque, New Mexico. Topical areas covered in this volume include pulse radiation and measurement, scattering theory, target detection and identification, antennas, signal processing, and communications.

PREFACE: The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics

Science.gov (United States)

Sadeghi, Nader; Czarnetzki, Uwe

2010-03-01

The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics (FLTPD) was held in Blansko, near Brno, Czech Republic. FLTPD is a biennial European event in which scientists working on low temperature plasmas present their recent results, pointing out in particular the originality of the diagnostic techniques used. The idea of starting this series of workshops was born out of a discussion between Frieder Döbele, Bill Graham and one of us when travelling together from Bar Harbor, USA (after the 6th LAPD) to Montreal, Canada, in October 1993. It became evident that we had been lacking a European meeting that could bring together experts in the field of low temperature plasma diagnostics and facilitate sharing the knowledge of these diagnostics with a new generation of scientists. The first FLTPD was held in Les Houches, France, in February 1995. Since then it has been held in the spring of every other year in different European countries, as shown below. The next meeting will be held in Zinnowitz, near Greifswald, Germany, in May 2011. Year Location Chair of LOC 1995 Les Houches, France J Derouard 1997 Bad Honnef, Germany F Döbele 1999 Saillon, Switzerland Ch Hollenstein 2001 Rolduc, The Netherlands R van de Sanden 2003 Specchia, Italy S De Benedictis 2005 Les Houches, France N Sadeghi 2007 Cumbria, United Kingdom M Bowden 2009 Blansko, Czech Republic F Krčma To favour brainstorming and extended discussions between participants, FLTPD meetings have always been organized in isolated locations with the number of attendees limited to about 70. Workshops are held over three and a half days with about ten expert presentations by invited speakers (a few from overseas), as well as short oral or poster contributions. This special issue of Journal of Physics D: Applied Physics contains 20 articles representative of contributions to the last FLTPD in Blansko. All invited speakers and others who gave presentations, as selected by the Scientific Committee, were invited

SPS Machine Protection Incident in 2009

CERN Document Server

Wenninger, J

2009-01-01

During the 008 SPS run a single machine operation incident happened on June 27th when a high intensity CNGS beam was lost in a dipole of sextant 1 following a time system ‘freeze’. The vacuum chamber was punctured over a length of over 10 cm, and the vacuum in the affected sector rose to atmospheric pressure. The dipole was exchanged June 30th. This note describes the incident in detail and presents the measures taken to avoid a similar incident in the future.

Manufacturing Methods for Cutting, Machining and Drilling Composites. Volume 1. Composites Machining Handbook

Science.gov (United States)

1978-08-01

12°±30’ 1180±2° OPTIONAL .0005 IN./IN. BACK TAPER 015 RAD LIPS TO BE WITHIN .002 OF TRUE ANGULAR POSITION NOTES: 1. LAND WIDTH: 28% ± .005... horoscope and dye-penetrant requirements. 79 PHASE 1 PHASE II PHASE III PHASE IV CUTTING DRILLING MACHINING NONDESTRUCTIVE EVALUATION METHOD MATERIAL

Electric machine and current source inverter drive system

Science.gov (United States)

Hsu, John S

2014-06-24

A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

High-pressure synthesis and characterization of new actinide borates, AnB4O8 (An=Th, U).

Science.gov (United States)

Hinteregger, Ernst; Hofer, Thomas S; Heymann, Gunter; Perfler, Lukas; Kraus, Florian; Huppertz, Hubert

2013-11-18

New actinide borates ThB4O8 and UB4O8 were synthesized under high-pressure, high-temperature conditions (5.5 GPa/1100 °C for thorium borate, 10.5 GPa/1100 °C for the isotypic uranium borate) in a Walker-type multianvil apparatus from their corresponding actinide oxide and boron oxide. The crystal structure was determined on basis of single-crystal X-ray diffraction data that were collected at room temperature. Both compounds crystallized in the monoclinic space group C2/c (Z=4). Lattice parameters for ThB4O8: a=1611.3(3), b=419.86(8), c=730.6(2) pm; β=114.70(3)°; V=449.0(2) Å(3); R1=0.0255, wR2=0.0653 (all data). Lattice parameters for UB4O8: a=1589.7(3), b=422.14(8), c=723.4(2) pm; β=114.13(3)°; V=443.1(2) Å(3); R1=0.0227, wR2=0.0372 (all data). The new AnB4O8 (An=Th, U) structure type is constructed from corner-sharing BO4 tetrahedra, which form layers in the bc plane. One of the four independent oxygen atoms is threefold-coordinated. The actinide cations are located between the boron-oxygen layers. In addition to Raman spectroscopic investigations, DFT calculations were performed to support the assignment of the vibrational bands. © 2013 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This isan open access article under the terms of the Creative Commons AttributionLicense, which permits use, distribution and reproduction in any medium,provided the original work is properly cited.

Twentieth Century evolution of machining in the United States – An ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

beginning of the Industrial Revolution in the late 1700's, virtually no ... expected that, by the middle of the 19th Century, as machine tools began to be manufactured .... Twentieth Century evolution of machining in the United States. 873. DESIGN ... Merchant M E 1961 The manufacturing system concept in production ...

Sales of healthy snacks and beverages following the implementation of healthy vending standards in City of Philadelphia vending machines.

Science.gov (United States)

Pharis, Meagan L; Colby, Lisa; Wagner, Amanda; Mallya, Giridhar

2018-02-01

We examined outcomes following the implementation of employer-wide vending standards, designed to increase healthy snack and beverage options, on the proportion of healthy v. less healthy sales, sales volume and revenue for snack and beverage vending machines. A single-arm evaluation of a policy utilizing monthly sales volume and revenue data provided by the contracted vendor during baseline, machine conversion and post-conversion time periods. Study time periods are full calendar years unless otherwise noted. Property owned or leased by the City of Philadelphia, USA. Approximately 250 vending machines over a 4-year period (2010-2013). At post-conversion, the proportion of sales attributable to healthy items was 40 % for snacks and 46 % for beverages. Healthy snack sales were 323 % higher (38·4 to 162·5 items sold per machine per month) and total snack sales were 17 % lower (486·8 to 402·1 items sold per machine per month). Healthy beverage sales were 33 % higher (68·2 to 90·6 items sold per machine per month) and there was no significant change in total beverage sales (213·2 to 209·6 items sold per machine per month). Revenue was 11 % lower for snacks ($US 468·30 to $US 415·70 per machine per month) and 21 % lower for beverages ($US 344·00 to $US 270·70 per machine per month). Sales of healthy vending items were significantly higher following the implementation of employer-wide vending standards for snack and beverage vending machines. Entities receiving revenue-based commission payments from vending machines should employ strategies to minimize potential revenue losses.

Mankind, machines and people

Energy Technology Data Exchange (ETDEWEB)

Hugli, A

1984-01-01

The following questions are addressed: is there a difference between machines and men, between human communication and communication with machines. Will we ever reach the point when the dream of artificial intelligence becomes a reality. Will thinking machines be able to replace the human spirit in all its aspects. Social consequences and philosophical aspects are addressed. 8 references.

Measuring the Confidence of 8th Grade Taiwanese Students' Knowledge of Acids and Bases

Science.gov (United States)

Jack, Brady Michael; Liu, Chia-Ju; Chiu, Houn-Lin; Tsai, Chun-Yen

2012-01-01

The present study investigated whether gender differences were present on the confidence judgments made by 8th grade Taiwanese students on the accuracy of their responses to acid-base test items. A total of 147 (76 male, 71 female) students provided item-specific confidence judgments during a test of their knowledge of acids and bases. Using the…

Laser excitation of 8-eV electronic states in Th{sup +}. A first pillar of the electronic bridge toward excitation of the Th-229 nucleus

Energy Technology Data Exchange (ETDEWEB)

Herrera-Sancho, Oscar-Andrey

2012-11-23

The possibility to realize a nuclear clock based on the optical magnetic dipole transition from the ground state to the low-energy isomeric state in the {sup 229}Th nucleus has motivated experiments and proposals toward highly accurate clocks with trapped ions and highly stable optical frequency standards with Th-doped solids. These systems hold great promise to open a field of research in the borderland between atomic and nuclear physics, which will enable highly sensitive tests of postulates from fundamental physics and also will allow us to coherently excite and control nuclear states, opening a wonderful and intriguing new field in physics. A major experimental obstacle that has to be overcome before any precision spectroscopy can be performed with this system is however the insufficient knowledge on the exact transition energy. The best experimental result so far is an indirect determination from {gamma}-spectroscopy with a relative uncertainty of about 6%. To facilitate the search for the nuclear transition within a wide uncertainty range around 8 eV, we investigate two-photon excitation in the dense electronic level structure of Th{sup +}, which enables the nuclear excitation via a resonantly enhanced inverse electronic bridge process. Experiments on one- and two-photon laser excitation of buffer gas cooled {sup 232}Th{sup +} ions in a radio-frequency ion trap are reported in this thesis. The strongest resonance line at 402 nm from the (6d{sup 2}7s)J=3/2 ground state to the (6d7s7p)J=5/2 state is driven as the first excitation step. Using nanosecond laser pulses in the 250-nm wavelength range for the second step of a two-photon excitation, we have observed seven previously unknown levels in the unexplored region of the electronic level structure around 8 eV. This investigation shows that the Th{sup +} ion seems to be well suited for the search of the isomer transition because both, theory and experimental results, agree on the density of strong transitions

Mi Tercer Libro de Maquinas Simples: La Rueda y la Polea. Escuela Intermedia Grados 7, 8 y 9 (My Third Book of Simple Machines: The Wheel and the Pulley. Intermediate School Grades 7, 8, and 9).

Science.gov (United States)

Alvarado, Patricio R.; Montalvo, Luis

This is the third book in a five-book physical science series on simple machines. The books are designed for Spanish-speaking junior high school students. This volume explains principles governing wheels and pulleys by suggesting experiments and posing questions concerning drawings in the book which illustrate the scientific principles. Friction…

Will learning to solve one-step equations pose a challenge to 8th grade students?

Science.gov (United States)

Ngu, Bing Hiong; Phan, Huy P.

2017-08-01

Assimilating multiple interactive elements simultaneously in working memory to allow understanding to occur, while solving an equation, would impose a high cognitive load. Element interactivity arises from the interaction between elements within and across operational and relational lines. Moreover, operating with special features (e.g. negative pronumeral) poses additional challenge to master equation solving skills. In an experiment, 41 8th grade students (girls = 16, boys = 25) sat for a pre-test, attended a session about equation solving, completed an acquisition phase which constituted the main intervention and were tested again in a post-test. The results showed that at post-test, students performed better on one-step equations tapping low rather than high element interactivity knowledge. In addition, students performed better on those one-step equations that contained no special features. Thus, both the degree of element interactivity and the operation with special features affect the challenge posed to 8th grade students on learning how to solve one-step equations.

Th17 Cells Exhibit Antitumor Effects in MDS Possibly through Augmenting Functions of CD8+ T Cells.

Science.gov (United States)

Li, Jing; Yue, Lanzhu; Wang, Huaquan; Liu, Chunyan; Liu, Hui; Tao, Jinglian; Qi, Weiwei; Wang, Yihao; Zhang, Wei; Fu, Rong; Shao, Zonghong

2016-01-01

Th17 cells are a newly found subset of distinct CD4+ Th effector cells' family and are found to play an important role in cancers. Myelodysplastic syndromes (MDS) are a common malignant hematological disease. Here, we showed that both the percentage and the function of Th17 cells were elevated in low-risk MDS while being decreased in high-risk MDS. Levels of upstream molecules of Th17 cells, IL-6 and IL-23, were higher in low-risk MDS but lower in high-risk MDS patients. The abnormal percentage of Th17 cells was closely related to clinical parameters including karyotype, morphologic blast percentage of bone marrow, peripheral absolute neutrophil count, and hemoglobin concentration. Furthermore, expression rates of perforin and granzyme B in BM CD3+CD8+ cells (cytotoxic T lymphocyte, CTL) positively correlated with levels of IL-17 but negatively correlated with BM blast percentage and could be significantly increased after stimulation with human recombinant IL-17 (rhIL-17). Our results suggested that Th17 cells might play an antitumor effect in the pathogenesis of MDS through IL-17/CTL pathway.

78th Annual Meeting of the Psychometric Society

CERN Document Server

Bolt, Daniel; Ark, L; Wang, Wen-Chung

2015-01-01

The 78th Annual Meeting of the Psychometric Society (IMPS) builds on the Psychometric Society's mission to share quantitative methods relevant to psychology. The chapters of this volume present cutting-edge work in the field. Topics include studies of item response theory, computerized adaptive testing, cognitive diagnostic modeling, and psychological scaling. Additional psychometric topics relate to structural equation modeling, factor analysis, causal modeling, mediation, missing data methods, and longitudinal data analysis, among others. The papers in this volume will be especially useful for researchers in the social sciences who use quantitative methods. Prior knowledge of statistical methods is recommended. The 78th annual meeting took place in Arnhem, The Netherlands between July 22nd and 26th, 2013. The previous volume to showcase work from the Psychometric Society’s Meeting is New Developments in Quantitative Psychology: Presentations from the 77th Annual Psychometric Society Meeting (Springer, 201...

80th Annual Meeting of the Psychometric Society

CERN Document Server

Bolt, Daniel; Wang, Wen-Chung; Douglas, Jeffrey; Wiberg, Marie

2016-01-01

The research articles in this volume cover timely quantitative psychology topics, including new methods in item response theory, computerized adaptive testing, cognitive diagnostic modeling, and psychological scaling. Topics within general quantitative methodology include structural equation modeling, factor analysis, causal modeling, mediation, missing data methods, and longitudinal data analysis. These methods will appeal, in particular, to researchers in the social sciences. The 80th annual meeting took place in Beijing, China, between the 12th and 16th of July, 2014. Previous volumes to showcase work from the Psychometric Society’s Meeting are New Developments in Quantitative Psychology: Presentations from the 77th Annual Psychometric Society Meeting (Springer, 2013), Quantitative Psychology Research: The 78th Annual Meeting of the Psychometric Society (Springer, 2015), and Quantitative Psychology Research: The 79th Annual Meeting of the Psychometric Society, Wisconsin, USA, 2014 (Springer, 2015).

The ThPOK transcription factor differentially affects the development and function of self-specific CD8(+) T cells and regulatory CD4(+) T cells.

Science.gov (United States)

Twu, Yuh-Ching; Teh, Hung-Sia

2014-03-01

The zinc finger transcription factor ThPOK plays a crucial role in CD4 T-cell development and CD4/CD8 lineage decision. In ThPOK-deficient mice, developing T cells expressing MHC class II-restricted T-cell receptors are redirected into the CD8 T-cell lineage. In this study, we investigated whether the ThPOK transgene affected the development and function of two additional types of T cells, namely self-specific CD8 T cells and CD4(+) FoxP3(+) T regulatory cells. Self-specific CD8 T cells are characterized by high expression of CD44, CD122, Ly6C, 1B11 and proliferation in response to either IL-2 or IL-15. The ThPOK transgene converted these self-specific CD8 T cells into CD4 T cells. The converted CD4(+) T cells are no longer self-reactive, lose the characteristics of self-specific CD8 T cells, acquire the properties of conventional CD4 T cells and survive poorly in peripheral lymphoid organs. By contrast, the ThPOK transgene promoted the development of CD4(+) FoxP3(+) regulatory T cells resulting in an increased recovery of CD4(+) FoxP3(+) regulatory T cells that expressed higher transforming growth factor-β-dependent suppressor activity. These studies indicate that the ThPOK transcription factor differentially affects the development and function of self-specific CD8 T cells and CD4(+) FoxP3(+) regulatory T cells. © 2013 John Wiley & Sons Ltd.

Impact of Model Detail of Synchronous Machines on Real-time Transient Stability Assessment

DEFF Research Database (Denmark)

Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Østergaard, Jacob

2013-01-01

In this paper, it is investigated how detailed the model of a synchronous machine needs to be in order to assess transient stability using a Single Machine Equivalent (SIME). The results will show how the stability mechanism and the stability assessment are affected by the model detail. In order...... of the machine models is varied. Analyses of the results suggest that a 4th-order model may be sufficient to represent synchronous machines in transient stability studies....

Higgs Machine Learning Challenge 2014

CERN Document Server

Olivier, A-P; Bourdarios, C ; LAL / Orsay; Goldfarb, S ; University of Michigan

2014-01-01

High Energy Physics (HEP) has been using Machine Learning (ML) techniques such as boosted decision trees (paper) and neural nets since the 90s. These techniques are now routinely used for difficult tasks such as the Higgs boson search. Nevertheless, formal connections between the two research fields are rather scarce, with some exceptions such as the AppStat group at LAL, founded in 2006. In collaboration with INRIA, AppStat promotes interdisciplinary research on machine learning, computational statistics, and high-energy particle and astroparticle physics. We are now exploring new ways to improve the cross-fertilization of the two fields by setting up a data challenge, following the footsteps of, among others, the astrophysics community (dark matter and galaxy zoo challenges) and neurobiology (connectomics and decoding the human brain). The organization committee consists of ATLAS physicists and machine learning researchers. The Challenge will run from Monday 12th to September 2014.

20th Annual Systems Engineering Conference. Volume 1, Monday-Tuesday

Science.gov (United States)

2017-10-26

20th Annual Systems Engineering Conference October 23-26, 2017 | Waterford at Springfield | Springfield, VA NDIA.org/systemsengineering...Conference Program SYSTEMS ENGINEERING CONFERENCE 2 Welcome to the NDIA Systems Engineering Conference On behalf of the National Defense Industrial...Association’s Systems Engineering Division, I would like to extend a very warm welcome to the 20th Annual Systems Engineering Conference. Yes, the 20th Annual

Breathing circuit compliance and accuracy of displayed tidal volume during pressure-controlled ventilation of infants: A quality improvement project.

Science.gov (United States)

Glenski, Todd A; Diehl, Carrie; Clopton, Rachel G; Friesen, Robert H

2017-09-01

% greater in the infant test lung (mean±SD TV 15±5 vs 9±4 mL; mean [95% CI] difference=6.3 [5.6, 7.1] mL, Ptidal volume was 41% greater than actual tidal volume (difference of 10.4 [8.6, 12.2] mL) when the circuit was expanded after the preuse self-test (preintervention) and 7% greater (difference of 2.5 [0.7, 4.2] mL) in subjects when the circuit was expanded prior to the preuse self-test (postintervention) (Ptidal volume in infants less than 10 kg during pressure-controlled ventilation. Overestimation of reported tidal volume can be avoided by expanding the breathing circuit tubing to the length which will be used during a case prior to performing the anesthesia machine preuse self-test. After department-wide education and implementation, performing a correct preuse self-test is now the standard practice in our cardiac operating rooms. © 2017 John Wiley & Sons Ltd.

8th Workshop on Computational Optimization

CERN Document Server

2016-01-01

This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2015. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, control of ethanol production, minimal convex hill with application in routing algorithms, graph coloring, flow design in photonic data transport system, predicting indoor temperature, crisis control center monitoring, fuel consumption of helicopters, portfolio selection, GPS surveying and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization problems. .

High temperature studies on scheelite and zircon type ThGeO4

International Nuclear Information System (INIS)

Patwe, S.J.; Achary, S.N.; Tyagi, A.K.

2008-01-01

The detailed structural analyses of two polymorphs of ThGeO 4 , namely, zircon (stable) and scheelite (metastable) types have been carried out from the in situ high temperature X-ray diffraction studies. Though both the polymorphs show positive thermal expansion, the coefficient of volume thermal expansion of scheelite modification is almost double of that for zircon modification. The anisotropies in thermal expansion behaviors are also different for the two modifications. The differences in thermal expansion behaviors have been explained from the differences in structural arrangements and anisotropy of the ThO 8 polyhedra in these two modifications. (author)

Of Slot Machines and Broken Test Tubes

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 5. Of Slot Machines and Broken Test Tubes. S Mahadevan. General Article Volume 19 Issue 5 May 2014 pp 395-405. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/019/05/0395-0405. Keywords.

The Effect on the 8th Grade Students' Attitude towards Statistics of Project Based Learning

Science.gov (United States)

Koparan, Timur; Güven, Bülent

2014-01-01

This study investigates the effect of the project based learning approach on 8th grade students' attitude towards statistics. With this aim, an attitude scale towards statistics was developed. Quasi-experimental research model was used in this study. Following this model in the control group the traditional method was applied to teach statistics…

Final Report: 8th International Symposium on Neutron Capture Therapy (NCT) for Cancer, May 15, 1998 - May 15, 1999

International Nuclear Information System (INIS)

Hawthorne, M.F.

1999-01-01

The 8th International Symposium on Neutron Capture Therapy for Cancer (8th ISNCTC) was held in La Jolla, CA on Sept. 13-18, 1998. This biennial meeting of the International Society for Neutron Capture Therapy (ISNCT) was hosted by Society President M.F. Hawthorne (UCLA Dept. of Chemistry and Biochemistry). The Symposium brought together scientists (300 registrants from 21 countries) from diverse fields to report the latest developments in NCT. Topics of the 275 papers presented (30 plenary lectures, 81 oral presentations, and 164 posters) included the physics of neutron sources, chemistry of tumor-targeting agents, dosimetry, radiobiological studies, and clinical applications

Quiescent plasma machine for plasma investigation

International Nuclear Information System (INIS)

Ferreira, J.L.

1993-01-01

A large volume quiescent plasma device is being developed at INPE to study Langmuir waves and turbulence generated by electron beams (E b ≤ 500 e V) interacting with plasma. This new quiescent plasma machine was designed to allow the performance of several experiments specially those related with laboratory space plasma simulation experiments. Current-driven instabilities and related phenomena such as double-layers along magnetic field lines are some of the many experiments planned for this machine. (author)

8 de março: conquistas e controvérsias The 8th of March: Gains and Controversies

Directory of Open Access Journals (Sweden)

EVA ALTERMAN BLAY

2001-01-01

Full Text Available O Dia Internacional da Mulher foi proposto por Clara Zetkin em 1910 no II Congresso Internacional de Mulheres Socialistas. Nos anos posteriores a 1970 este Dia passou a ser associado a um incêndio que ocorreu em Nova Iorque em 1911. Neste artigo procuro recuperar a história do Dia 8 de Março e as distorções que têm sido feitas sobre ele e sobre a luta feminista.Clara Zetkin suggested the creation of the International Women's Day during the 2nd Socialist Women's International Conference in 1910. After 1970 this date became increasingly associated with a fire that took place in New York City in 1911. In this paper I review the history of the 8th of March, pointing out some of the distortions of its meanings and the repercussions these distortions have had for an understanding of feminist struggles.

Longitudinal Study of Career Cluster Persistence from 8th Grade to 12th Grade with a Focus on the Science, Technology, Engineering, & Math Career Cluster

Science.gov (United States)

Wagner, Judson

Today's technology driven global economy has put pressure on the American education system to produce more students who are prepared for careers in Science, Technology, Engineering, and Math (STEM). Adding to this pressure is the demand for a more diverse workforce that can stimulate the development of new ideas and innovation. This in turn requires more female and under represented minority groups to pursue future careers in STEM. Though STEM careers include many of the highest paid professionals, school systems are dealing with exceptionally high numbers of students, especially female and under represented minorities, who begin but do not persist to STEM degree completion. Using the Expectancy-Value Theory (EVT) framework that attributes student motivation to a combination of intrinsic, utility, and attainment values, this study analyzed readily available survey data to gauge students' career related values. These values were indirectly investigated through a longitudinal approach, spanning five years, on the predictive nature of 8 th grade survey-derived recommendations for students to pursue a future in a particular career cluster. Using logistic regression analysis, it was determined that this 8 th grade data, particularly in STEM, provides significantly high probabilities of a 12th grader's average grade, SAT-Math score, the math and science elective courses they take, and most importantly, interest in the same career cluster.

FSW of Aluminum Tailor Welded Blanks across Machine Platforms

Energy Technology Data Exchange (ETDEWEB)

Hovanski, Yuri; Upadhyay, Piyush; Carlson, Blair; Szymanski, Robert; Luzanski, Tom; Marshall, Dustin

2015-02-16

Development and characterization of friction stir welded aluminum tailor welded blanks was successfully carried out on three separate machine platforms. Each was a commercially available, gantry style, multi-axis machine designed specifically for friction stir welding. Weld parameters were developed to support high volume production of dissimilar thickness aluminum tailor welded blanks at speeds of 3 m/min and greater. Parameters originally developed on an ultra-high stiffness servo driven machine where first transferred to a high stiffness servo-hydraulic friction stir welding machine, and subsequently transferred to a purpose built machine designed to accommodate thin sheet aluminum welding. The inherent beam stiffness, bearing compliance, and control system for each machine were distinctly unique, which posed specific challenges in transferring welding parameters across machine platforms. This work documents the challenges imposed by successfully transferring weld parameters from machine to machine, produced from different manufacturers and with unique control systems and interfaces.

Determination of the Relationship between 8th Grade Students Learning Styles and TIMSS Mathematics Achievement

Science.gov (United States)

Yilmaz, Gül Kaleli; Koparan, Timur; Hanci, Alper

2016-01-01

In this study, it is aimed to determination of the relationship between learning styles and TIMSS mathematics achievements of eighth grade students. Correlational research design that is one of the quantitative research methods, was used in this study. The sample of the research consists of 652 8th grade students 347 are male and 305 are female…

Spatial Visualization as Mediating between Mathematics Learning Strategy and Mathematics Achievement among 8th Grade Students

Science.gov (United States)

Rabab'h, Belal; Veloo, Arsaythamby

2015-01-01

Jordanian 8th grade students revealed low achievement in mathematics through four periods (1999, 2003, 2007 & 2011) of Trends in International Mathematics and Science Study (TIMSS). This study aimed to determine whether spatial visualization mediates the affect of Mathematics Learning Strategies (MLS) factors namely mathematics attitude,…

Density of Plutonium Turnings Generated from Machining Activities

Energy Technology Data Exchange (ETDEWEB)

Gonzales, John Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Duane M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jachimowski, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Archuleta, Alonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Arellano, Gerald Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Melton, Vince Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-10-20

The purpose of this project was to determine the density of plutonium (Pu) turnings generated from the range of machining activities, using both surrogate material and machined Pu turnings. Verify that 500 grams (g) of plutonium will fit in a one quart container using a surrogate equivalent volume and that 100 grams of Pu will fit in a one quart Savy container.

Gravitation following the Prague inspiration : a volume in celebration of the 60th birthday of Jiri Bicak

CERN Document Server

Podolsky, J; Zofka, M

2002-01-01

This volume is dedicated to Jirí Bicák on the occasion of his 60th birthday. The authors are his former students who currently work in the fields of general relativity, astrophysics, theoretical physics and cosmology. Unlike in traditional Festschrifts with many short contributions, they present several comprehensive surveys and elaborate original works. The subjects range from the motion of stars in galactic nuclei to quantum mechanics on a boundary, and include current topics such as cosmological perturbations, effects of a repulsive cosmological constant, discs around black holes and gravit

PREFACE: 8th Edoardo Amaldi Conference on Gravitational Waves

Science.gov (United States)

Marka, Zsuzsa; Marka, Szabolcs

2010-04-01

(The attached PDF contains select pictures from the Amaldi8 Conference) At Amaldi7 in Sydney in 2007 the Gravitational Wave International Committee (GWIC), which oversees the Amaldi meetings, decided to hold the 8th Edoardo Amaldi Conference on Gravitational Waves at Columbia University in the City of New York. With this decision, Amaldi returned to North America after a decade. The previous two years have seen many advances in the field of gravitational wave detection. By the summer of 2009 the km-scale ground based interferometric detectors in the US and Europe were preparing for a second long-term scientific run as a worldwide detector network. The advanced or second generation detectors had well-developed plans and were ready for the production phase or started construction. The European-American space mission, LISA Pathfinder, was progressing towards deployment in the foreseeable future and it is expected to pave the ground towards gravitational wave detection in the milliHertz regime with LISA. Plans were developed for an additional gravitational wave detector in Australia and in Japan (in this case underground) to extend the worldwide network of detectors for the advanced detector era. Japanese colleagues also presented plans for a space mission, DECIGO, that would bridge the gap between the LISA and ground-based interferometer frequency range. Compared to previous Amaldi meetings, Amaldi8 had new elements representing emerging trends in the field. For example, with the inclusion of pulsar timing collaborations to the GWIC, gravitational wave detection using pulsar timing arrays was recognized as one of the prominent directions in the field and was represented at Amaldi8 as a separate session. By 2009, searches for gravitational waves based on external triggers received from electromagnetic observations were already producing significant scientific results and plans existed for pointing telescopes by utilizing gravitational wave trigger events. Such

Micro-machined resonator oscillator

Science.gov (United States)

Koehler, Dale R.; Sniegowski, Jeffry J.; Bivens, Hugh M.; Wessendorf, Kurt O.

1994-01-01

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

34 CFR 395.8 - Distribution and use of income from vending machines on Federal property.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Distribution and use of income from vending machines on... use of income from vending machines on Federal property. (a) Vending machine income from vending... the basis of each prior year's operation, except that vending machine income shall not accrue to any...

78 FR 9916 - Filing Dates for the Missouri Special Election in the 8th Congressional District

Science.gov (United States)

2013-02-12

... 8th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Missouri has scheduled a Special General Election on June 4, 2013, to fill the.... Committees required to file reports in connection with the Special General Election on June 4, 2013, shall...

9th FCC-ee (TLEP) Physics Workshop

CERN Document Server

2015-01-01

This is the 9th in the series of FCCee/TLEP-related workshops. It follows on from the sucessful 8th TLEP workshop that took place in Paris on 27-29 October 2014, and the FCC kick-off meeting held on 12-15 February 2014 at University of Geneva. The workshop is open to all FCC-ee /TLEP design study members, and more generally to all interested in a precision Z, W, H, top factory. The focus will be on physics and experiments at the FCC-ee, but a more general session is organized the first day (Tuesday 3 February afternoon) with presentations about the FCC design study as a whole, and on machine and physics for the FCC-ee and the FCC-hh, with synergies and complementarities. This session is aimed at a larger audience, towards improving the project visibility in Italy. It will be followed by a social dinner in the evening. The workshop starts on Tuesday at 13:30 and ends on Thursday 16:00. Registration is now open, please proceed at your earliest convenience! Please visit the FCC-ee / TLEP web site, and subscrib...

Research priorities for the health sector for the 8th Malaysia Plan

International Nuclear Information System (INIS)

Narimah Awin

2000-01-01

At the inter-institutional meeting to identify, the research priorities for the sector for the 7MP (7 th Malaysian Plan), held in mid-1994, priorities were determined according to the hierarchy of socioeconomic groups, target areas, programmes and scopes. The more detailed projects under these were to be determined by the researchers they embark on the projects themselves. The most useful level for reference is the target area. There were 7 target areas identified at the deliberations, and an eighth one (medical biotechnology) was added later on by the IRPA Secretariat in the Ministry of Science Technology and Environment. These 8 target areas are: 1)Health problems associated with lifestyles 2) Health problems related to demographic changes, 3) Vector borne and other communicable diseases, 4 ) Epidemiological databases, 5) Technologies in health, 6)The health system and health care industry, 7) Environmental and occupational health, 8) Medical biotechnology. (author)

Neural networks for perception human and machine perception

CERN Document Server

Wechsler, Harry

1991-01-01

Neural Networks for Perception, Volume 1: Human and Machine Perception focuses on models for understanding human perception in terms of distributed computation and examples of PDP models for machine perception. This book addresses both theoretical and practical issues related to the feasibility of both explaining human perception and implementing machine perception in terms of neural network models. The book is organized into two parts. The first part focuses on human perception. Topics on network model ofobject recognition in human vision, the self-organization of functional architecture in t

Effects of γ-rays on Th1 and Th2 immune function of mice

International Nuclear Information System (INIS)

Jin Wei; Cui Yufang; An Xiaoxia; Xu Han; Dong Bo; Liu Xiaolan; Luo Qingliang

2007-01-01

Objective: To observe the effects of 6 Gy whole body γ-irradiation on immune function of Th1 and Th2 in mouse, and to investigate the cellular and molecular mechanism of immune system injury induced by irradiation. Methods: Surface marker and intracellular cytokines of lymphocytes were stained with fluorescence-labeled monoclonal antibodies, then the changes of lymphocyte subpopulations, especially the Th1 and Th2 in mouse peripheral blood and spleen were analyzed by flow cytometry. Results: (1) 1 d after 6 Gy y- irradiation, lymphocytic subsets of CD 19 + and CD 8 + in spleen decreased apparently and the percentages of them were only 30% and 41% of control groups respectively (P 19 + and 14 d for CD 8 + respectively, however, up to 21 d post-irradiation they still did not return to control level. (2) Th1 subpopulations in mouse peripheral blood and spleen were significantly reduced at 1 d after irradiation and were only 2.6% and 7.6% of control groups (P 4 + / CD 8 + were significantly increased at 1 d post-irradiation in mouse spleen because of swift reduction of CD 8 + cells. Interestingly, either in peripheral blood or in spleen in irradiated mice, the ratio of Th1/Th2 were evidently raised because of the decrement of Th1 cells, exhibited obviously a phenomenon of predominant immune response of Th2 cells. Conclusions: It is suggested that the depression of mouse immune function induced by 6 Gy γ-irradiation might be caused by changes of CD 4 + /CD 8 + ratio, especially the imbalance of Th1/Th2 function subpopulations. It is shown that the imbalance of Th1/Th2 function subpopulations plays an important role in radiation-induced immune injury, thus providing a better insight into the molecular mechanism and new strategies for prevent and treatment measures of immune injury by irradiation. (authors)

6th Workshop on Virtual Machines and Intermediate Languages (VMIL’12)

NARCIS (Netherlands)

Rajan, Hridesh; Hauptmann, Michael; Bockisch, Christoph; Blackburn, Steve

2012-01-01

The VMIL workshop is a forum for research in virtual machines and intermediate languages. It is dedicated to identifying programming mechanisms and constructs that are currently realized as code transformations or implemented in libraries but should rather be supported at VM level. Candidates for

Functional and Logic Programming - 14th International Symposium (FLOPS 2018)

DEFF Research Database (Denmark)

This volume contains the proceedings of the 14th International Symposium on Functional and Logic Programming - FLOPS 2018 - held in Nagoya, Japan, May 9 - 11, 2018......This volume contains the proceedings of the 14th International Symposium on Functional and Logic Programming - FLOPS 2018 - held in Nagoya, Japan, May 9 - 11, 2018...

8th International conference on CANDU maintenance. Conference proceedings

International Nuclear Information System (INIS)

2008-01-01

The 8th International Conference on CANDU Maintenance was held in Toronto, Ontario, Canada on November 16-18, 2008. The theme of the conference was operational excellence: achieving competent, tightly-managed support services and was of interest to people working on the front lines of operations, maintenance and refurbishment. Equipment reliability is a critical factor in achieving safe and reliable Nuclear Power Plant operations for many reasons. For one it reduces the challenges upon the operating staff and allows station personnel to 'go on the offence' instead of having to play defense in a reactive mode. Plant reliability ensures that there is time to study the issues in detail and develop solutions for long-term success. Let us not forget that the owner carries the burden of demonstrating the return on investment, and plant reliability goes a long way in helping to make the case for plant life extension. A good reputation for plant reliability provides the public capital necessary to build confidence and facilitate the licensing process.

POWER-GEN '90 conference papers: Volume 7 (Fossil plant performance availability and improvement) and Volume 8 (Nuclear power issues)

International Nuclear Information System (INIS)

Anon.

1990-01-01

This is book 4 of papers presented at the Third International Exhibition and Conference for the Power Generation Industries, December 4-6, 1990. This book contains Volume 7, Fossil Plant Performance Availability and Improvement, and Volume 8, Nuclear Power Issues. The topics of the papers include computer applications in plant operations and maintenance, managing aging plants, plant improvements, plant operations and maintenance, the future of nuclear power, achieving cost effective plant operation, managing nuclear plant aging and license renewal, and the factors affecting a decision to build a new nuclear plant

3D CT cerebral angiography technique using a 320-detector machine with a time–density curve and low contrast medium volume: Comparison with fixed time delay technique

International Nuclear Information System (INIS)

Das, K.; Biswas, S.; Roughley, S.; Bhojak, M.; Niven, S.

2014-01-01

Aim: To describe a cerebral computed tomography angiography (CTA) technique using a 320-detector CT machine and a small contrast medium volume (35 ml, 15 ml for test bolus). Also, to compare the quality of these images with that of the images acquired using a larger contrast medium volume (90 or 120 ml) and a fixed time delay (FTD) of 18 s using a 16-detector CT machine. Materials and methods: Cerebral CTA images were acquired using a 320-detector machine by synchronizing the scanning time with the time of peak enhancement as determined from the time–density curve (TDC) using a test bolus dose. The quality of CTA images acquired using this technique was compared with that obtained using a FTD of 18 s (by 16-detector CT), retrospectively. Average densities in four different intracranial arteries, overall opacification of arteries, and the degree of venous contamination were graded and compared. Results: Thirty-eight patients were scanned using the TDC technique and 40 patients using the FTD technique. The arterial densities achieved by the TDC technique were higher (significant for supraclinoid and basilar arteries, p < 0.05). The proportion of images deemed as having “good” arterial opacification was 95% for TDC and 90% for FTD. The degree of venous contamination was significantly higher in images produced by the FTD technique (p < 0.001%). Conclusion: Good diagnostic quality CTA images with significant reduction of venous contamination can be achieved with a low contrast medium dose using a 320-detector machine by coupling the time of data acquisition with the time of peak enhancement

The Single Needle Lockstitch Machine. [Setting Zippers.] Module 8.

Science.gov (United States)

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This module on setting zippers, one in a series on the single needle lockstitch sewing machine for student self-study, contains five sections. Each section includes the following parts: an introduction, directions, an objective, learning activities, student information, student self-check, check-out activities, and an instructor's final checklist.…

8th Czechoslovak spectroscopic conference. Abstracts

International Nuclear Information System (INIS)

1988-01-01

Volume 2 of the conference proceedings contains abstracts of 17 invited papers and 119 poster presentations, devoted to molecular spectroscopy. Abstracts of 2 poster presentations were inputted in INIS, one dealing with organic complexes of 99 Tc, the other with electronic spectra of lanthanide ions. (A.K.)

35th Annual meeting proceedings. Volume XXIII

International Nuclear Information System (INIS)

Anon.

1994-01-01

This report contains the proceedings of the 35th Annual Meeting of the Institute of Nuclear Materials Management. INMM is a nonprofit organization incorporated in the state of Ohio. This meeting was held at The Registry Resort Hotel in Naples, Florida, USA, July 17-20, 1994. Separate abstracts were entered into the Energy Data Base

Reverse hypothesis machine learning a practitioner's perspective

CERN Document Server

Kulkarni, Parag

2017-01-01

This book introduces a paradigm of reverse hypothesis machines (RHM), focusing on knowledge innovation and machine learning. Knowledge- acquisition -based learning is constrained by large volumes of data and is time consuming. Hence Knowledge innovation based learning is the need of time. Since under-learning results in cognitive inabilities and over-learning compromises freedom, there is need for optimal machine learning. All existing learning techniques rely on mapping input and output and establishing mathematical relationships between them. Though methods change the paradigm remains the same—the forward hypothesis machine paradigm, which tries to minimize uncertainty. The RHM, on the other hand, makes use of uncertainty for creative learning. The approach uses limited data to help identify new and surprising solutions. It focuses on improving learnability, unlike traditional approaches, which focus on accuracy. The book is useful as a reference book for machine learning researchers and professionals as ...

GPK heading machine

Energy Technology Data Exchange (ETDEWEB)

Krmasek, J.; Novosad, K.

1981-01-01

This article evaluates performance tests of the Soviet made GPK heading machine carried out in 4 coal mines in Czechoslovakia (Ostrava-Karvina region and Kladno mines). GPK works in coal seams and rocks with compression strength of 40 to 50 MPa. Dimensions of the tunnel are height 1.8 to 3.8 m and width 2.6 to 4.7 m, tunnel gradient plus to minus 10 degrees. GPK weighs 16 t, its conical shaped cutting head equipped with RKS-1 cutting tools is driven by an electric motor with 55 kW capacity. Undercarriage of the GPK, gathering-arm loader, hydraulic system, electric system and dust supression system (water spraying or pneumatic section) are characterized. Specifications of GPK heading machines are compared with PK-3r and F8 heading machines. Reliability, number of failures, dust level, noise, productivity depending on compression strength of rocks, heading rate in coal and in rocks, energy consumption, performance in inclined tunnels, and cutting tool wear are evaluated. Tests show that GPK can be used to drive tunnels in coal with rock constituting up to 50% of the tunnel crosscut, as long as rock compression strength does not exceed 50 MPa. In rocks characterized by higher compression strength cutting tool wear sharply increases. GPK is characterized by higher productivity than that of the PK-3r heading machine. Among the weak points of the GPK are: unsatisfactory reliability and excessive wear of its elements. (4 refs.) (In Czech)

The 17th International Conference on Biomedical Engineering

CERN Document Server

Lim, Chwee; Leo, Hwa

2017-01-01

This volume presents the proceedings of the 16th ICMBE held from 4th to 7th December 2016, Singapore. Topics of the proceedings include 6 tracks: BioImaging and BioSignals, Bio-Micro/Nano Technologies BioRobotics and Medical Devices, Biomaterials and Regenerative Medicine.- BioMechanics and Mechanobiology., Engineering/Synthetic Biology.

Increased expression of IRF8 in tumor cells inhibits the generation of Th17 cells and predicts unfavorable survival of diffuse large B cell lymphoma patients.

Science.gov (United States)

Zhong, Weijie; Xu, Xin; Zhu, Zhigang; Du, Qinghua; Du, Hong; Yang, Li; Ling, Yanying; Xiong, Huabao; Li, Qingshan

2017-07-25

The immunological pathogenesis of diffuse large B cell lymphoma (DLBCL) remains elusive. Searching for new prognostic markers of DLBCL is a crucial focal point for clinical scientists. The aim of the present study was to examine the prognostic value of interferon regulatory factor 8 (IRF8) expression and its effect on the development of Th17 cells in the tumor microenvironment of DLBCL patients. Flow cytometry, immunohistochemistry, and quantitative real-time PCR were used to detect the distribution of Th17 cells and related cytokines and IRF8 in tumor tissues from DLBCL patients. Two DLBCL cell lines (OCI-LY10 and OCI-LY1) with IRF8 knockdown or overexpression and two human B lymphoblast cell lines were co-cultured with peripheral blood mononuclear cells (PBMCs) in vitro to determine the effect of IRF8 on the generation of Th17 cells. Quantitative real-time PCR and Western blotting were used to investigate the involvement of retinoic acid receptor-related orphan receptor gamma t (RORγt) in the effect of IRF8 on Th17 cell generation. The survival of 67 DLBCL patients was estimated using the Kaplan-Meier method and log-rank analysis. The percentage of Th17 cells was lower in DLBCL tumor tissues than in PBMCs and corresponding adjacent benign tissues. Relative expression of interleukin (IL)-17A was lower, whereas that of interferon (IFN)-γ was higher in tumor tissues than in benign tissues. Co-culture with DLBCL cell lines inhibited the generation of Th17 cells in vitro. IRF8 upregulation was detected in DLBCL tumor tissues, and it was associated with decreased DLBCL patient survival. Investigation of the underlying mechanism suggested that IRF8 upregulation in DLBCL, through an unknown mechanism, inhibited Th17 cell generation by suppressing RORγt in neighboring CD4+ T cells. Tumor cells may express soluble or membrane-bound factors that inhibit the expression of RORγt in T cells within the tumor microenvironment. Our findings suggest that IRF8 expression could

Second Generation Dutch Pulsar Machine - PuMa-II

NARCIS (Netherlands)

Karuppusamy, Ramesh; Stappers, Ben; Slump, Cornelis H.; van der Klis, Michiel

2004-01-01

The Second Generation Pulsar Machine (PuMa- II) is under development for the Westerbork Synthesis Radio Telescope. This is a summary of th e system design and architecture. We show that state of the art pulsar research is possible with commercially available hardware components. This approach

Permanent magnet machines with air gap windings and integrated teeth windings

Energy Technology Data Exchange (ETDEWEB)

Alatalo, M [Chalmers Univ. of Technology, Goeteborg (Sweden). School of Electrical and Computer Engineering

1996-06-01

The Thesis deals with axial and radial flux permanent magnet machines with air gap windings and an integrated teeth winding. The aim is to develop a machine that produces a high torque per unit volume with as low losses as possible. The hypothesis is that an advanced three-phase winding, magnetized by a permanent magnet rotor should be better than other machine topologies. The finite element method is used to find favourable dimensions of the slotless winding, the integrated teeth winding and the permanent magnet rotor. Three machines were built and tested in order to verify calculations. It can be concluded that the analysis method shows good agreement with the calculated and the measured values of induced voltage and torque. The experiments showed that the slotless machine with NdFeB-magnets performs approximately like the slotted machine. A theoretical comparison of axial flux topology to radial flux topology showed that the torque production of the inner rotor radial flux machine is superior to that of the axial flux machine. An integrated teeth winding based on iron powder teeth glued to the winding was studied. The force density of a pole with integrated teeth is around three times the force density of a slotless pole. A direct drive wind power generator of 6.4 kW with integrated teeth can have the same power losses and magnet weight as a transversal flux machine. Compared to a standard induction machine the integrated teeth machine had approximately 2.5 times the power capacity of the induction machine with the same power losses and outer volume. 39 refs

Alternative thermodynamic cycle for the Stirling machine

Science.gov (United States)

Romanelli, Alejandro

2017-12-01

We develop an alternative thermodynamic cycle for the Stirling machine, where the polytropic process plays a central role. Analytical expressions for pressure and temperatures of the working gas are obtained as a function of the volume and the parameter that characterizes the polytropic process. This approach achieves closer agreement with the experimental pressure-volume diagram and can be adapted to any type of Stirling engine.

Machinability of cast commercial titanium alloys.

Science.gov (United States)

Watanabe, I; Kiyosue, S; Ohkubo, C; Aoki, T; Okabe, T

2002-01-01

This study investigated the machinability of cast orthopedic titanium (metastable beta) alloys for possible application to dentistry and compared the results with those of cast CP Ti, Ti-6Al-4V, and Ti-6Al-7Nb, which are currently used in dentistry. Machinability was determined as the amount of metal removed with the use of an electric handpiece and a SiC abrasive wheel turning at four different rotational wheel speeds. The ratios of the amount of metal removed and the wheel volume loss (machining ratio) were also evaluated. Based on these two criteria, the two alpha + beta alloys tested generally exhibited better results for most of the wheel speeds compared to all the other metals tested. The machinability of the three beta alloys employed was similar or worse, depending on the speed of the wheel, compared to CP Ti. Copyright 2002 Wiley Periodicals, Inc.

Proceedings of the Conference of the International Group for the Psychology of Mathematics Education (PME) (24th, Hiroshima, Japan, July 23-27, 2000), Volume 1.

Science.gov (United States)

Nakahara, Tadao, Ed.; Koyama, Masataka, Ed.

The first volume of the 24th annual conference of the International Group for the Psychology of Mathematics Education includes plenary addresses, plenary panel discussions, research forum, project groups, discussion groups, short oral communications, and poster presentations. (ASK)

Thermal expansion studies on Th(MoO4)2, Na2Th(MoO4)3 and Na4Th(MoO4)4

International Nuclear Information System (INIS)

Keskar, Meera; Krishnan, K.; Dahale, N.D.

2008-01-01

Thermal expansion behavior of Th(MoO 4 ) 2 , Na 2 Th(MoO 4 ) 3 and Na 4 Th(MoO 4 ) 4 was studied under vacuum in the temperature range of 298-1123 K by high temperature X-ray diffractometer. Th(MoO 4 ) 2 was synthesized by reacting ThO 2 with 2 mol of MoO 3 , at 1073 K in air and Na 2 Th(MoO 4 ) 3 and Na 4 Th(MoO 4 ) 4 were prepared by reacting Th(MoO 4 ) 2 with 1 and 2 mol of Na 2 MoO 4 , respectively at 873 K in air. The XRD data of Th(MoO 4 ) 2 was indexed on orthorhombic system where as XRD data of Na 2 Th(MoO 4 ) 3 and Na 4 Th(MoO 4 ) 4 were indexed on tetragonal system. The lattice parameters and cell volume of all the three compounds, fit into polynomial expression with respect to temperature, showed positive thermal expansion (PTE) up to 1123 K. The average value of thermal expansion coefficients for Th(MoO 4 ) 2 , Na 2 Th(MoO 4 ) 3 and Na 4 Th(MoO 4 ) 4 were determined from the high temperature data

The Effect of Project Based Learning on the Statistical Literacy Levels of Student 8th Grade

Science.gov (United States)

Koparan, Timur; Güven, Bülent

2014-01-01

This study examines the effect of project based learning on 8th grade students' statistical literacy levels. A performance test was developed for this aim. Quasi-experimental research model was used in this article. In this context, the statistics were taught with traditional method in the control group and it was taught using project based…

77 FR 9927 - Filing Dates for the Arizona Special Election in the 8th Congressional District

Science.gov (United States)

2012-02-21

... 8th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for... Special Primary and Special General Election on June 12, 2012, shall file a 12-day Pre-Primary Report, a... Elections shall file a 12-day Pre-Primary Report on April 5, 2012; a 12-day Pre-General Report on May 31...

48th Annual Convention of Computer Society of India

CERN Document Server

Avadhani, P; Udgata, Siba; Lakshminarayana, Sadasivuni; ICT and Critical Infrastructure

2014-01-01

  This volume contains 85 papers presented at CSI 2013: 48th Annual Convention of Computer Society of India with the theme “ICT and Critical Infrastructure”. The convention was held during 13th –15th December 2013 at Hotel Novotel Varun Beach, Visakhapatnam and hosted by Computer Society of India, Vishakhapatnam Chapter in association with Vishakhapatnam Steel Plant, the flagship company of RINL, India. This volume contains papers mainly focused on Data Mining, Data Engineering and Image Processing, Software Engineering and Bio-Informatics, Network Security, Digital Forensics and Cyber Crime, Internet and Multimedia Applications and E-Governance Applications.

NOTA EDITORIAL: REVISTA GEONORTE VOLUME 8, NÚMERO.30, JUL. DEZ. 2017

OpenAIRE

João Cândido André da Silva Neto

2017-01-01

Prezados leitores e autores, a Revista Geonorte, do Departamento de Geografia e do Programa de Pós-Graduação em Geografia da Universidade Federal do Amazonas – UFAM, apresenta sua nova edição, Volume 8 Número 30, do 2° semestre de 2017.

8th International School of Fusion Reactor Technology "Ettore Majorana"

CERN Document Server

Leotta, G G; Muon-catalyzed fusion and fusion with polarized nuclei

1988-01-01

The International School of Fusion Reactor Technology started its courses 15 years ago and since then has mantained a biennial pace. Generally, each course has developed the subject which was announced in advance at the closing of the previous course. The subject to which the present proceedings refer was chosen in violation of that rule so as to satisfy the recent and diffuse interest in cold fusion among the main European laboratories involved in controlled thermonuclear research (CTR). In the second half of 1986 we started to prepare a workshop aimed at assessing the state of the art and possibly of the perspectives of muon- catalyzed fusion. Research in this field has recently produced exciting experimental results open to important practical applications. We thought it worthwhile to consider also the beneficial effects and problems of the polarization ofthe nuclei in both cold and thermonuclear fusion. In preparing the 8th Course on Fusion Reactor Technology, it was necessary to abandon the tradi...

U-Th-He dating of apatite: A potential thermochronometer

International Nuclear Information System (INIS)

Zeitler, P.K.; Herczeg, A.L.; McDougall, I.; Honda, M.

1987-01-01

The authors found a gem quality crystal of Durango fluorapatite to have a 4 He content consistent with complete retention of radiogenic helium since its formation at about 31 Ma. Isothermal heating and step-heating analysis reveal 4 He loss to occur systematically by volume diffusion at low temperatures. The linear, low-temperature portion of the diffusion data yields an activation energy of 38.5 ± 8.1 kcal/mol and a frequency factor of 1n (D 0 /a 2 ) = 16.4 ± 2.8 sec -1 , corresponding to a closure temperature of 105 degree C ± 30 degree C (cooling rate 10 degree C/m.y.). It appears that U-Th-He dating of apatite might represent a useful new thermochronometer with a range similar to that of fission-track dating of apatite. From these results, they infer that a number of the too-young U-Th-He dates reported in the literature on minerals such as zircon and magnetite may in fact represent valuable records of the low-temperature thermal history of their host rocks

Proceedings of the 8th Annual Conference on the Science of Dissemination and Implementation

OpenAIRE

Chambers, David; Simpson, Lisa; Hill-Briggs, Felicia; Neta, Gila; Vinson, Cynthia; Chambers, David; Beidas, Rinad; Marcus, Steven; Aarons, Gregory; Hoagwood, Kimberly; Schoenwald, Sonja; Evans, Arthur; Hurford, Matthew; Rubin, Ronnie; Hadley, Trevor

2016-01-01

Table of contents A1 Introduction to the 8th Annual Conference on the Science of Dissemination and Implementation: Optimizing Personal and Population Health David Chambers, Lisa Simpson D1 Discussion forum: Population health D&I research Felicia Hill-Briggs D2 Discussion forum: Global health D&I research Gila Neta, Cynthia Vinson D3 Discussion forum: Precision medicine and D&I research David Chambers S1 Predictors of community therapists? use of therapy techniques in a large public mental hea...

Explorations in the History of Machines and Mechanisms : Proceedings of HMM2012

CERN Document Server

Ceccarelli, Marco

2012-01-01

This book contains the proceedings of HMM2012, the 4th International Symposium on Historical Developments in the field of Mechanism and Machine Science (MMS). These proceedings cover recent research concerning all aspects of the development of MMS from antiquity until the present and its historiography: machines, mechanisms, kinematics, dynamics, concepts and theories, design methods, collections of methods, collections of models, institutions and biographies.

Digital 3D reconstruction of Betancourt’s historical heritage: the dredging machine in the Port of Kronstadt

Directory of Open Access Journals (Sweden)

José Ignacio Rojas-Sola

2018-01-01

Full Text Available Agustín de Betancourt was one of the most distinguished engineers of the 18th and 19th centuries with numerous contributions to various fields of engineering, including civil engineering. This research shows the process followed in documenting the cultural heritage of this engineer from the Canary Islands (Spain, especially in the geometric documentation of the Kronstadt harbour-dredging machine presented in 1808. The initial information was taken from the Canary Orotava Foundation, History of Science, which has been compiling information on the Betancourt Digital Project for years. In particular, there are only 8 colour illustrations without scale, as well as a small report on the description of the parts and the operation of a dredging machine previously designed for the Port of Venice (but never put into operation. This was the basis for the construction of the dredging machine for the Port of Kronstadt (Russia that did go into operation in 1812 for more than 10 years. From this information, 3D reconstruction was made by means of Computer-Aided Design (CAD techniques thanks to the use of the Autodesk Inventor Professional parametric software, which made it possible to build the 3D model and complete its geometric documentation as well as different detailed plans and exploded views. The results show a reliable approach to its modelling, a process in which several dimensional and operational hypotheses have had to be assumed due to the lack of existing information.

Determination of 232Th, 230Th and 228Th in liquid effluents from uranium mining

International Nuclear Information System (INIS)

Godoy, Jose Marcus de Oliveira

1979-10-01

A liquid scintillator αlpha spectrometer was built for the determination of Th- 228 , Th- 230 and Th- 232 in liquid effluents from Uranium mines and mills. The resolution of the αlpha spectrometer was found to be 200-300 KeV, when the scintillator was 8% T0P0, 0,77% scintimix-4 (91% PP0 and 9% Dimetil-P0P0P) and 10% of naphthalene in toluene. Aliquat-336 in xylene (30% v/v) was used to separate the thorium isotopes from other interfering radionuclides (U- 238 , U- 234 , Ra- 226 , Po- 210 ). Under the extraction experimental conditions, the detection limits were 1,2 pCi/1 for Th- 232 , 1,2 pCi/1 for Th- 230 and 0,9 pCi/1 for Th- 228 , for 1000 minutes of counting time. (author)

8th Czechoslovak spectroscopic conference. Abstracts

International Nuclear Information System (INIS)

1988-01-01

Volume 3 of the conference proceedings contains abstracts of 17 invited papers, 101 poster presentations and 7 papers of instrument manufacturers, devoted to special spectroscopic techniques including X-ray microanalysis, X-ray spectral analysis, Moessbauer spectrometry, mass spectrometry, instrumental activation analysis and other instrumental radioanalytical methods, electron spectrometry, and techniques of environmental analysis. Sixty abstracts were inputted in INIS. (A.K.)

A double-sided linear primary permanent magnet vernier machine.

Science.gov (United States)

Du, Yi; Zou, Chunhua; Liu, Xianxing

2015-01-01

The purpose of this paper is to present a new double-sided linear primary permanent magnet (PM) vernier (DSLPPMV) machine, which can offer high thrust force, low detent force, and improved power factor. Both PMs and windings of the proposed machine are on the short translator, while the long stator is designed as a double-sided simple iron core with salient teeth so that it is very robust to transmit high thrust force. The key of this new machine is the introduction of double stator and the elimination of translator yoke, so that the inductance and the volume of the machine can be reduced. Hence, the proposed machine offers improved power factor and thrust force density. The electromagnetic performances of the proposed machine are analyzed including flux, no-load EMF, thrust force density, and inductance. Based on using the finite element analysis, the characteristics and performances of the proposed machine are assessed.

13thInternational Conference on Computer and Information Science

CERN Document Server

Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing 2012

2013-01-01

The purpose of the 13th  International Conference on Computer and Information Science (SNPD 2012) held on August 8-10, 2012 in Kyoto, Japan was to bring together researchers and scientists, businessmen and entrepreneurs, teachers and students to discuss the numerous fields of computer science, and to share ideas and information in a meaningful way.  Our conference officers selected the best 17 papers from those papers accepted for presentation at the conference in order to publish them in this volume.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rounds of rigorous review.   The  conference organizers selected 17 outstanding papers from SNPD 2012, all of which you will find in this volume of Springer’s Studies in Computational Intelligence.

APPLICATION OF QUEUING THEORY TO AUTOMATED TELLER MACHINE (ATM) FACILITIES USING MONTE CARLO SIMULATION

OpenAIRE

UDOANYA RAYMOND MANUEL; ANIEKAN OFFIONG

2014-01-01

This paper presents the importance of applying queuing theory to the Automated Teller Machine (ATM) using Monte Carlo Simulation in order to determine, control and manage the level of queuing congestion found within the Automated Teller Machine (ATM) centre in Nigeria and also it contains the empirical data analysis of the queuing systems obtained at the Automated Teller Machine (ATM) located within the Bank premises for a period of three (3) months. Monte Carlo Simulation is applied to th...

Middle school science curriculum design and 8th grade student achievement in Massachusetts public schools

Science.gov (United States)

Clifford, Betsey A.

The Massachusetts Department of Elementary and Secondary Education (DESE) released proposed Science and Technology/Engineering standards in 2013 outlining the concepts that should be taught at each grade level. Previously, standards were in grade spans and each district determined the method of implementation. There are two different methods used teaching middle school science: integrated and discipline-based. In the proposed standards, the Massachusetts DESE uses grade-by-grade standards using an integrated approach. It was not known if there is a statistically significant difference in student achievement on the 8th grade science MCAS assessment for students taught with an integrated or discipline-based approach. The results on the 8th grade science MCAS test from six public school districts from 2010 -- 2013 were collected and analyzed. The methodology used was quantitative. Results of an ANOVA showed that there was no statistically significant difference in overall student achievement between the two curriculum models. Furthermore, there was no statistically significant difference for the various domains: Earth and Space Science, Life Science, Physical Science, and Technology/Engineering. This information is useful for districts hesitant to make the change from a discipline-based approach to an integrated approach. More research should be conducted on this topic with a larger sample size to better support the results.

NOTA EDITORIAL: REVISTA GEONORTE VOLUME 8, NÚMERO.30, JUL. DEZ. 2017

Directory of Open Access Journals (Sweden)

João Cândido André da Silva Neto

2017-12-01

Full Text Available Prezados leitores e autores, a Revista Geonorte, do Departamento de Geografia e do Programa de Pós-Graduação em Geografia da Universidade Federal do Amazonas – UFAM, apresenta sua nova edição, Volume 8 Número 30, do 2° semestre de 2017.

Volume loss as a tool to assess kiln drying of eucalyptus wood

Directory of Open Access Journals (Sweden)

Djeison Cesar Batista

Full Text Available In this study, we aimed to analyze the kiln drying quality of Eucalyptus grandis, Eucalyptus saligna and Eucalyptus dunnii woods with respect to volume loss. Wood from the three species was kiln dried together with the same drying schedule and conditions in a conventional-temperature pilot kiln. Three kinds of volume loss were evaluated: total - from saturated (initial to machined (final condition; shrinkage - from saturated to 10% moisture content; and machining - from 10% moisture content to machined condition. Eucalyptus grandis wood was the most dimensionally stable and presented the smallest volume loss due to shrinkage. Although they had different shrinkage behaviors, Eucalyptus grandis and Eucalyptus saligna woods presented the same drying quality regarding machining and total volume losses. These species can be considered the same for kiln drying. Eucalyptus dunnii wood presented the worst quality in drying, and should not be kiln dried in the same batch with the other species.

Research priorities for the health sector for the 8{sup th} Malaysia Plan

Energy Technology Data Exchange (ETDEWEB)

Awin, Narimah [Inst. of Medical Research, Kuala Lumpur (Malaysia)

2000-07-01

At the inter-institutional meeting to identify, the research priorities for the sector for the 7MP (7{sup th} Malaysian Plan), held in mid-1994, priorities were determined according to the hierarchy of socioeconomic groups, target areas, programmes and scopes. The more detailed projects under these were to be determined by the researchers they embark on the projects themselves. The most useful level for reference is the target area. There were 7 target areas identified at the deliberations, and an eighth one (medical biotechnology) was added later on by the IRPA Secretariat in the Ministry of Science Technology and Environment. These 8 target areas are: 1)Health problems associated with lifestyles 2) Health problems related to demographic changes, 3) Vector borne and other communicable diseases, 4 ) Epidemiological databases, 5) Technologies in health, 6)The health system and health care industry, 7) Environmental and occupational health, 8) Medical biotechnology. (author)

Removal of 230Th and 231Pa at ocean margins

International Nuclear Information System (INIS)

Anderson, R.F.; Bacon, M.P.; Brewer, P.G.

1983-01-01

Uranium, thorium and protactinium isotopes were measured in particulate matter collected by sediment traps deployed in the Panama Basin and by in-situ filtration of large volumes of seawater in the Panama and Guatemala Basins. Concentrations of dissolved Th and Pa isotopes were determined by extraction onto MnO 2 adsorbers placed in line behind the filters in the in-situ pumping systems. Concentrations of dissolved 230 Th and 231 Pa in the Panama and Guatemala Basins are lower than in the open ocean, whereas dissolved 230 Th/ 231 Pa ratios are equal to, or slightly greater than, ratios in the open ocean. Particulate 230 Th/ 231 Pa ratios in the sediment trap samples ranged from 4 to 8, in contrast to ratios of 30 or more at the open ocean sites previously studied. Particles collected by filtration in the Panama Basin and nearest to the continental margin in the Guatemala Basin contained 230 Th/ 231 Pa ratios similar to the ratios in the sediment trap samples. The ratios increased with distance away from the continent. Suspended particles near the margin show no preference for adsorption of Th or Pa and therefore must be chemically different from particles in the open ocean, which show a strong preference for adsorption of Th. Ocean margins, as typified by the Panama and Guatemala Basins, are preferential sinks for 231 Pa relative to 230 Th. Furthermore, the margins are sinks for 230 Th and, to a greater extent, 231 Pa transported by horizontal mixing from the open ocean. (orig.)

Operational warnings issued by the SMC in the 8th March snow event in Catalonia

Science.gov (United States)

Vilaclara, E.; Segalà, S.; Andrés, A.; Aran, M.

2010-09-01

The snowfall event of 8th March 2010 was one of the most important of the last years in Catalonia, with high societal impact in the communication and in the power distribution. Since 2002, after an agreement between Meteorological Service of Catalonia (SMC) and Civil Protection authority, the SMC is the agency responsible to carry out meteorological warnings in Catalonia. These warnings are issued depending on the thresholds which are expected to be exceeded (three different probability degrees are defined), and are characterized by a high spatial and temporal resolution. In the snow event of 8th March, forecasting team of the SMC did the first meteorological warning three days before, on 5th March. During the two following days broadcasted four different warnings, taking into account the high probability of exceeding 2 cm of snow above 200 meters, 15 above 400 m and 30 above 800 m. Furthermore, the SMC disseminated also two special press releases with the aim to extend the forecast to the public. In the afternoon of Sunday, 7th March, the snow precipitation started in some areas of Catalonia. From this moment, the SMC followed the surveillance of situation with the remote sensing tools and the Meteorological Observers Network data. This network is formed by a hundred of spotters with mobile phones able to transmit observations in real time to our web site. This surveillance and the conceptual model of snow events in Catalonia allowed the forecasters to improve the estimation of the snow level forecasted by mesoscale meteorological models. In this event, the snow level obtained from these models was higher than the real one. In spite of the accuracy of the forecast, the impact was very important in Catalonia. On one hand, it was due to the exceptionality of the event, with 3 cm of snow in Barcelona in the afternoon of a working day. On the other hand, the large amount of wet snow precipitation (until 100 mm), and the wind, contributed to an important snow

Occupational dose reduction at nuclear power plants: Annotated bibliography of selected readings in radiation protection and ALARA. Volume 8

Energy Technology Data Exchange (ETDEWEB)

Sullivan, S.G.; Khan, T.A.; Xie, J.W. [Brookhaven National Lab., Upton, NY (United States)

1995-05-01

The ALARA Center at Brookhaven National Laboratory publishes a series of bibliographies of selected readings in radiation protection and ALARA in a continuing effort to collect and disseminate information on radiation dose reduction at nuclear power plants. This volume 8 of the series. The abstracts in this bibliography were selected form proceedings of technical meetings and conference journals, research reports, and searches of the Energy Science and Technology database of the US Department of Energy. The subject material of these abstracts relates to the many aspects of radiation protection and dose reduction, and ranges form use of robotics, to operational health physics, to water chemistry. Material on the design, planning, and management of nuclear power stations is included, as well as information on decommissioning and safe storage efforts. Volume 8 contains 232 abstracts, an author index, and a subject index. The author index is specific for this volume. The subject index is cumulative and lists all abstract numbers from volumes 1 to 8. The numbers in boldface indicate the abstracts in this volume; the numbers not in boldface represent abstracts in previous volumes.

Occupational dose reduction at nuclear power plants: Annotated bibliography of selected readings in radiation protection and ALARA. Volume 8

International Nuclear Information System (INIS)

Sullivan, S.G.; Khan, T.A.; Xie, J.W.

1995-05-01

The ALARA Center at Brookhaven National Laboratory publishes a series of bibliographies of selected readings in radiation protection and ALARA in a continuing effort to collect and disseminate information on radiation dose reduction at nuclear power plants. This volume 8 of the series. The abstracts in this bibliography were selected form proceedings of technical meetings and conference journals, research reports, and searches of the Energy Science and Technology database of the US Department of Energy. The subject material of these abstracts relates to the many aspects of radiation protection and dose reduction, and ranges form use of robotics, to operational health physics, to water chemistry. Material on the design, planning, and management of nuclear power stations is included, as well as information on decommissioning and safe storage efforts. Volume 8 contains 232 abstracts, an author index, and a subject index. The author index is specific for this volume. The subject index is cumulative and lists all abstract numbers from volumes 1 to 8. The numbers in boldface indicate the abstracts in this volume; the numbers not in boldface represent abstracts in previous volumes

Structural phase stability of ThSb and ThAs under pressure

International Nuclear Information System (INIS)

Venkatasubramaniam, K.; Rajagopalan, M.; Palanivel, B.; Kalpana, G.

1997-01-01

The high-pressure behaviour of thorium monopnictides is of considerable interest as these systems exhibit structural phase transitions under pressure. At ambient conditions these compounds crystallize in the NaCl-type(B1) structure. Experiments show that with the application of pressure these compounds transform to the CsCl-type (B2) structure. ThSb and ThAs are found to exhibit B1-B2 transition in the pressure range between 9-12 GPa and 1826 GPa respectively. In this work, we present the electronic and high-pressure behaviour of ThAs and ThSb performed using the tight-binding linear muffin-tin orbital method. The total energies within the atomic sphere approximation were calculated as a function of volume for both the B1 and B2 structures. The total energy calculations reveal that both ThSb and ThAs are stable in the B1 structure at ambient conditions and undergo structural transition to the B2 structure at pressures 78 and 240 kbar respectively, which are in good agreement with the experimental values. The calculated values of equilibrium lattice parameter and the transition pressure are found to be in good agreement with the experimental results. (author)

VMIL 2011 : the 5th Workshop on Virtual Machines and Intermediate Languages

NARCIS (Netherlands)

Rajan, Hridesh; Hauptmann, Michael; Bockisch, Christoph; Dyer, Robert

2011-01-01

The VMIL workshop is a forum for research in virtual machines and intermediate languages. It is dedicated to identifying programming mechanisms and constructs that are currently realized as code transformations or implemented in libraries but should rather be supported at VM level. Candidates for

8th International Congress on Biocatalysis (Biocat2016), Hamburg, Germany, 28 August–1 September, 2016

OpenAIRE

Skander Elleuche; Petra Esselun; Ralf Grote; Barbara Klippel; Anna Krüger; Andreas Liese; Margit Ostrop; Christian Schäfers; Carola Schröder; Garabed Antranikian

2016-01-01

The “8th International Congress on Biocatalysis (biocat2016)” is part of a biennial conference series. Biocatalysis is a topic based on the edge of biology and chemistry, which brings together scientists from the life sciences, engineers and computer scientists. This international conference serves as a platform to meet researchers from all over the world, to find collaboration partners for future projects and to gain novel insights into modern topics and techniques. Biocat covers the most ex...

40{sup th} Annual meeting of the European Society of Neuroradiology. Diagnostic and interventional. 24{sup th} Advanced course in diagnostic neuroradiology and 9{sup th} Advanced course in interventional neuroradiology. ESNR 2017

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-09-15

The volume covers the issues of the 40{sup th} Annual meeting of the European Society of Neuroradiology, the 24{sup th} advanced course in diagnostic neuroradiology and the 9{sup th} advanced course in interventional neuroradiology (ESNR 2017). The main issues of the sessions were the neuroradiological impact in diagnosis and treatment, neurodegenerative diseases, acute stroke - new horizons in diagnosis and treatment, case presentations concerning brain tumors, epilepsy, dementia, trauma.

The Hospital Microbiome Project: Meeting Report for the 1st Hospital Microbiome Project Workshop on sampling design and building science measurements, Chicago, USA, June 7th-8th 2012.

Science.gov (United States)

Smith, Daniel; Alverdy, John; An, Gary; Coleman, Maureen; Garcia-Houchins, Sylvia; Green, Jessica; Keegan, Kevin; Kelley, Scott T; Kirkup, Benjamin C; Kociolek, Larry; Levin, Hal; Landon, Emily; Olsiewski, Paula; Knight, Rob; Siegel, Jeffrey; Weber, Stephen; Gilbert, Jack

2013-04-15

This report details the outcome of the 1st Hospital Microbiome Project workshop held on June 7th-8th, 2012 at the University of Chicago, USA. The workshop was arranged to determine the most appropriate sampling strategy and approach to building science measurement to characterize the development of a microbial community within a new hospital pavilion being built at the University of Chicago Medical Center. The workshop made several recommendations and led to the development of a full proposal to the Alfred P. Sloan Foundation as well as to the creation of the Hospital Microbiome Consortium.

8th International Workshop on Parallel Tools for High Performance Computing

CERN Document Server

Gracia, José; Knüpfer, Andreas; Resch, Michael; Nagel, Wolfgang

2015-01-01

Numerical simulation and modelling using High Performance Computing has evolved into an established technique in academic and industrial research. At the same time, the High Performance Computing infrastructure is becoming ever more complex. For instance, most of the current top systems around the world use thousands of nodes in which classical CPUs are combined with accelerator cards in order to enhance their compute power and energy efficiency. This complexity can only be mastered with adequate development and optimization tools. Key topics addressed by these tools include parallelization on heterogeneous systems, performance optimization for CPUs and accelerators, debugging of increasingly complex scientific applications, and optimization of energy usage in the spirit of green IT. This book represents the proceedings of the 8th International Parallel Tools Workshop, held October 1-2, 2014 in Stuttgart, Germany – which is a forum to discuss the latest advancements in the parallel tools.

Blockade of αEβ7 integrin suppresses accumulation of CD8+ and Th9 lymphocytes from patients with IBD in the inflamed gut in vivo.

Science.gov (United States)

Zundler, Sebastian; Schillinger, Daniela; Fischer, Anika; Atreya, Raja; López-Posadas, Rocío; Watson, Alastair; Neufert, Clemens; Atreya, Imke; Neurath, Markus F

2017-11-01

Therapeutically targeting lymphocyte adhesion is of increasing relevance in IBD. Yet, central aspects of the action of antiadhesion compounds are incompletely understood. We investigated the role of αEβ7 and α4β7 integrins and their blockade by vedolizumab and etrolizumab for trafficking of IBD T lymphocytes in an in vivo model of homing to and retention in the inflamed gut. We explored integrin expression in patients with IBD by flow cytometry and immunohistochemistry, while regulation of integrins was studied in T cell cultures. The functional relevance of integrins was assessed by adhesion assays and a recently established humanised mouse model in dextran sodium sulfate-treated immunodeficient mice. High expression of αEβ7 was noted on CD8 + and CD4 + Th9 cells, while α4β7 was expressed on CD8 + , Th2 and Th17 cells. T cell receptor stimulation and transforming growth factor β were key inducers of αEβ7 on human T cells, while butyric acid suppressed αEβ7. In comparison to α4β7 blockade via vedolizumab, blockade of β7 via etrolizumab surrogate antibody superiorly reduced colonic numbers of CD8 + and Th9 cells in vivo after 3 hours, while no difference was noted after 0.5 hours. AEβ7 expression was higher on CD8 + T cells from patients with IBD under vedolizumab therapy. AEβ7 is of key relevance for gut trafficking of IBD CD8 + T cells and CD4 + Th9 cells in vivo and mainly retention might account for this effect. These findings indicate that blockade of αEβ7 in addition to α4β7 may be particularly effective in intestinal disorders with expansion of CD8 + and Th9 cells such as IBD. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Proceedings of the Conference of the International Group for the Psychology of Mathematics Education (30th, Prague, Czech Republic, July 16-21, 2006). Volume 1

Science.gov (United States)

Novotna, Jarmila, Ed.; Moraova, Hana, Ed.; Kratka, Magdalena, Ed.; Stehlikova, Nad'a, Ed.

2006-01-01

This volume of the 30th annual proceedings of the International Group for the Psychology of Mathematics Education conference presents: plenary panel papers; research forum papers; short oral communication papers; and poster presentation papers from the meeting. Information relating to discussion groups and working sessions is also provided.…

8th International symposium on transport phenomena in combustion

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

The 8th International Symposium on Transport Phenomena in Combustion will be held in San Francisco, California, U.S.A., July 16-20, 1995, under the auspices of the Pacific Center of Thermal-Fluids Engineering. The purpose of the Symposium is to provide a forum for researchers and practitioners from around the world to present new developments and discuss the state of the art and future directions and priorities in the areas of transport phenomena in combustion. The Symposium is the eighth in a series; previous venues were Honolulu 1985, Tokyo 1987, Taipei 1988, Sydney 1991, Beijing 1992, Seoul 1993 and Acapulco 1994, with emphasis on various aspects of transport phenomena. The current Symposium theme is combustion. The Symposium has assembled a balanced program with topics ranging from fundamental research to contemporary applications of combustion theory. Invited keynote lecturers will provide extensive reviews of topics of great interest in combustion. Colloquia will stress recent advances and innovations in fire spread and suppression, and in low NO{sub x} burners, furnaces, boilers, internal combustion engines, and other practical combustion systems. Finally, numerous papers will contribute to the fundamental understanding of complex processes in combustion. This document contains abstracts of papers to be presented at the Symposium.

The Effect of Internet-Based Education on Student Success in Teaching of 8th Grade Triangles Subject

Science.gov (United States)

Kaya, Deniz; Kesan, Cenk; Izgiol, Dilek

2013-01-01

In the study, it was researched the effect of internet-based application on student success. Internet-based application was used at the teaching of triangles subject which is included in 8th grade units of triangles and algebra. The study was carried out over the internet with a computer software program: Vitamin Program. The study was carried out…

Examination of the 8th grade students' TIMSS mathematics success in terms of different variables

Science.gov (United States)

Kaleli-Yılmaz, Gül; Hanci, Alper

2016-07-01

The aim of this study is to determine how the TIMSS mathematics success of the 8th grade students differentiates according to the school type, gender, mathematics report mark, parents' education level, cognitive domains and cognitive domains by gender. Relational survey method was used in the study. Six-hundred fifty two 8th grade students studying in the same city in Turkey participated in this study. In this study, a 45 question test that was made up by choosing TIMSS 2011 mathematics questionnaire was used as a data collection tool. Quantitative data analysis methods were used in the data analysis, frequency, percentage, average, standard deviation, independent sample test, one-way analysis of variance and post-hoc tests were applied to data by using SPSS packaged software. At the end of the study, it was determined that the school type, mathematics school mark, parents' education level and cognitive domains influenced the students' TIMSS mathematics success but their gender was a neutral element. Moreover, it was seen that schools which are really successful in national exams are more successful in TIMSS exam; students whose mathematics school marks are 5 and whose parents graduated from university are more successful in TIMSS exams than others. This study was produced from Alper HANCİ's master thesis that is made consulting Asst. Prof. Gül KALELİ YILMAZ.

Healing Magazine, Volume 8, 2003.

Science.gov (United States)

2003

This volume of "Healing Magazine" features practical, clinical information aimed at sharing current work in children's mental health. The first issue contains articles on intervention for self-injurious behavior, providing school-based grief groups, effectively using time-out as a parenting tool, and KidsPeace's suicide prevention…

Effect of microstructure on mechanical properties and machinability of spheroidal graphite cast iron

International Nuclear Information System (INIS)

Kubota, Satoru; Iio, Chinori; Yamaguchi, Shoji; Naito, Daiki; Tomota, Yo; Stefanus, Harjo

2013-01-01

Tensile properties, fatigue strength and machinability of spheroidal graphite cast irons with different microstructures were studied. Work-hardening and tensile strength increased with increasing pearlite volume fraction. In situ neutron diffraction during tensile deformation revealed that phase stresses and intergranular stresses are generated with deformation resulting in high work-hardening and high tensile strength with increasing pearlite volume fraction. It was found that graphite grains bear almost no stress, and strongly influence fatigue crack initiation as well as propagation. Therefore graphite refinement is very effective to realize high fatigue strength. The tool life for cutting becomes shorter with increasing pearlite volume fraction. The balance of mechanical properties and machinability was considered. (author)

The 1989 progress report of GANIL: Operations and machine studies

International Nuclear Information System (INIS)

1990-03-01

The 1989 progress report of the GANIL (French acronym for National Large Accelerator of Heavy Ions) is presented. The studies and the operations performed on the accelerator during the 10th July to the 18th December are summarized. The machine's operating time, the time required in the starting step and the time available for the users are examined. Several technical studies performed are reported. The results obtained after the energy increase operation are satisfactory. The beam intensity was increased of about a factor of 10 [fr

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 1 + 2 + 3 from track "Building Retrofit".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 1 + 2 + 3 from track "Building Retrofit"....

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 31 + 32 + 33 from track "Building Performance".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 31 + 32 + 33 from track "Building Performance"....

8th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachines

CERN Document Server

1998-01-01

Twenty-one years have passed since the first symposium in this series was held in Paris (1976). Since then there have been meetings in Lausanne (1980), Cambridge (1984), Aachen (1987), Beijing (1989), Notre Dame (1991) and Fukuoka (1994). During this period a tremendous development in the field of unsteady aerodynamics and aeroelasticity in turbomachines has taken place. As steady-state flow conditions become better known, and as blades in the turbomachine are constantly pushed towards lower weight, and higher load and efficiency, the importance of unsteady phenomena appear more clearly. th The 8 Symposium was, as the previous ones, of high quality. Furthermore, it presented the audience with the latest developments in experimental, numerical and theoretical research. More papers than ever before were submitted to the conference. As the organising committee wanted to preserve the uniqueness of the symposium by having single sessions, and thus mingle speakers and audience with different backgrounds in this int...

8th International Conference on Bio-Inspired Computing : Theories and Applications

CERN Document Server

Pan, Linqiang; Fang, Xianwen

2013-01-01

International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA) is one of the flagship conferences on Bio-Computing, bringing together the world’s leading scientists from different areas of Natural Computing. Since 2006, the conferences have taken place at Wuhan (2006), Zhengzhou (2007), Adelaide (2008), Beijing (2009), Liverpool & Changsha (2010), Malaysia (2011) and India (2012). Following the successes of previous events, the 8th conference is organized and hosted by Anhui University of Science and Technology in China. This conference aims to provide a high-level international forum that researchers with different backgrounds and who are working in the related areas can use to present their latest results and exchange ideas. Additionally, the growing trend in Emergent Systems has resulted in the inclusion of two other closely related fields in the BIC-TA 2013 event, namely Complex Systems and Computational Neuroscience. These proceedings are intended for researchers in the fiel...

Public health and social supervision issues within public administration of ukrainian territories in the late 8th- early 9th centuries.

Science.gov (United States)

Hrynzovskyi, Anatolii M; Holovanova, Irina A; Omelchuk, Sergei T; Kuzminska, Olena V; Hrynzovska, Anastasia A; Karlova, Olena O; Kondratiuk, Vitalii Ye

Introduction: The public health system modernization history is based upon the progress in state country administration and administration of healthcare within the sectorwide approach. The WHO European Bureau pays much attention to the National Health Service systems development while implementing their basic policies. The Ukrainian state health service management was founded basing on the regulatory field of the Russian Empire, using the European healthcare promotion experience. Aim: of the article is the analysis of the regulatory field of police and amenity authorities of the Russian Empire and Ukraine within the medical and social service in the 18th-19th centuries. Materials and methods: The structure of the article corresponds to the problem city and chronology principles, using the following methods and techniques of scientific learning: the systemic, historic, regulatory comparative, logical and structural-functional analysis of the studied medical-legal phenomena. The study sources are the scientific publications, collections of laws and executive orders of the Russian Empire and Ukraine in the 18th-19th centuries. Review: As a result of the performed work it can be determined were the main directions of the police competence in late 18th- early 19th centuries. Conclusion: Preserving health, treatment of the ill and injured, management of medical and social service of those in need, holding various preventive activities and supporting safe environment and regulating the safety of food were the main directions of the police competence in late 18th- early 19th centuries.

Proceedings from The 8th Annual International Society for Musculoskeletal Imaging in Rheumatology (ISEMIR) Conference

DEFF Research Database (Denmark)

Troum, Orrin M; Pimienta, Olga L; Olech, Ewa

2016-01-01

The International Society for Musculoskeletal Imaging in Rheumatology (ISEMIR) was founded in 2005 with the goal of discussing matters related to imaging in rheumatology, particularly, validation, education, and use in both clinical practice and research. The field of musculoskeletal (MSK) imaging...... is continuously evolving; therefore, education for healthcare providers in this field is of paramount importance. ISEMIR's international faculty and world-renowned experts presented the newest information as it relates to the use of magnetic resonance imaging (MRI) and ultrasound (US) at the 8th annual ISEMIR...

Machine Shop Suggested Job and Task Sheets. Part II. 21 Advanced Jobs.

Science.gov (United States)

Texas A and M Univ., College Station. Vocational Instructional Services.

This volume consists of advanced job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-one advanced machine shop job sheets are included. Some or all of this material is provided for each job: an introductory sheet with aim, checking…

Machine Shop Suggested Job and Task Sheets. Part I. 25 Elementary Jobs.

Science.gov (United States)

Texas A and M Univ., College Station. Vocational Instructional Services.

This volume consists of elementary job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-five simple machine shop job sheets are included. Some or all of this material is provided for each job sheet: an introductory sheet with aim, checking…

Effect of Heat Treatment on Machining Properties of the AlSi9Cu3(Fe Alloy

Directory of Open Access Journals (Sweden)

Wieroński P.

2016-09-01

Full Text Available Automation of machining operations, being result of mass volume production of components, imposes more restrictive requirements concerning mechanical properties of starting materials, inclusive of machinability mainly. In stage of preparation of material, the machinability is influenced by such factors as chemical composition, structure, mechanical properties, plastic working and heat treatment, as well as a factors present during machining operations, as machining type, cutting parameters, material and geometry of cutting tools, stiffness of the system: workpiece – machine tool – fixture and cutting tool.

11th International Conference on Computing and Information Technology

CERN Document Server

Meesad, Phayung; Boonkrong, Sirapat

2015-01-01

This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 3, Sessions 12-16

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 3, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, ad the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected abstracts have been indexed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 1, Sessions 1-5

International Nuclear Information System (INIS)

Block, R.C.; Feiner, F.

1995-09-01

This document, Volume 1, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 2, Sessions 6-11

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 2, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 1, Sessions 1-5

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 1, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Co-receptor choice by V alpha14i NKT cells is driven by Th-POK expression rather than avoidance of CD8-mediated negative selection.

Science.gov (United States)

Engel, Isaac; Hammond, Kirsten; Sullivan, Barbara A; He, Xi; Taniuchi, Ichiro; Kappes, Dietmar; Kronenberg, Mitchell

2010-05-10

Mouse natural killer T (NKT) cells with an invariant V alpha14-J alpha18 rearrangement (V alpha14 invariant [V alpha14i] NKT cells) are either CD4(+)CD8(-) or CD4(-)CD8(-). Because transgenic mice with forced CD8 expression in all T cells exhibited a profound NKT cell deficit, the absence of CD8 has been attributed to negative selection. We now present evidence that CD8 does not serve as a coreceptor for CD1d recognition and that the defect in development in CD8 transgene homozygous mice is the result of a reduction in secondary T cell receptor alpha rearrangements. Thymocytes from mice hemizygous for the CD8 transgene have a less severe rearrangement defect and have functional CD8(+) V alpha14i NKT cells. Furthermore, we demonstrate that the transcription factor Th, Poxviruses and Zinc finger, and Krüppel family (Th-POK) is expressed by V alpha14i NKT cells throughout their differentiation and is necessary both to silence CD8 expression and for the functional maturity of V alpha14i NKT cells. We therefore suggest that Th-POK expression is required for the normal development of V alpha14i NKT cells and that the absence of CD8 expression by these cells is a by-product of such expression, as opposed to the result of negative selection of CD8-expressing V alpha14i NKT cells.

Geometry intuitive, discrete, and convex : a tribute to László Fejes Tóth

CERN Document Server

Böröczky, Károly; Tóth, Gábor; Pach, János

2013-01-01

The present volume is a collection of a dozen survey articles, dedicated to the memory of the famous Hungarian geometer, László Fejes Tóth, on the 99th anniversary of his birth. Each article reviews recent progress in an important field in intuitive, discrete, and convex geometry. The mathematical work and perspectives of all editors and most contributors of this volume were deeply influenced by László Fejes Tóth.

A tubular hybrid Halbach/axially-magnetized permanent-magnet linear machine

Directory of Open Access Journals (Sweden)

Yi Sui

2017-05-01

Full Text Available A single-phase tubular permanent-magnet linear machine (PMLM with hybrid Halbach/axially-magnetized PM arrays is proposed for free-piston Stirling power generation system. Machine topology and operating principle are elaborately illustrated. With the sinusoidal speed characteristic of the free-piston Stirling engine considered, the proposed machine is designed and calculated by finite-element analysis (FEA. The main structural parameters, such as outer radius of the mover, radial length of both the axially-magnetized PMs and ferromagnetic poles, axial length of both the middle and end radially-magnetized PMs, etc., are optimized to improve both the force capability and power density. Compared with the conventional PMLMs, the proposed machine features high mass and volume power density, and has the advantages of simple control and low converter cost. The proposed machine topology is applicable to tubular PMLMs with any phases.

Peak thrust operation of linear induction machines from parameter identification

Energy Technology Data Exchange (ETDEWEB)

Zhang, Z.; Eastham, T.R.; Dawson, G.E. [Queen`s Univ., Kingston, Ontario (Canada). Dept. of Electrical and Computer Engineering

1995-12-31

Various control strategies are being used to achieve high performance operation of linear drives. To maintain minimum volume and weight of the power supply unit on board the transportation vehicle, peak thrust per unit current operation is a desirable objective. True peak thrust per unit current through slip control is difficult to achieve because the parameters of linear induction machines vary during normal operation. This paper first develops a peak thrust per unit current control law based on the per-phase equivalent circuit for linear induction machines. The algorithm for identification of the variable parameters in induction machines is then presented. Application to an operational linear induction machine (LIM) demonstrates the utility of this algorithm. The control strategy is then simulated, based on an operational transit LIM, to show the capability of achieving true peak thrust operation for linear induction machines.

A tubular hybrid Halbach/axially-magnetized permanent-magnet linear machine

Science.gov (United States)

Sui, Yi; Liu, Yong; Cheng, Luming; Liu, Jiaqi; Zheng, Ping

2017-05-01

A single-phase tubular permanent-magnet linear machine (PMLM) with hybrid Halbach/axially-magnetized PM arrays is proposed for free-piston Stirling power generation system. Machine topology and operating principle are elaborately illustrated. With the sinusoidal speed characteristic of the free-piston Stirling engine considered, the proposed machine is designed and calculated by finite-element analysis (FEA). The main structural parameters, such as outer radius of the mover, radial length of both the axially-magnetized PMs and ferromagnetic poles, axial length of both the middle and end radially-magnetized PMs, etc., are optimized to improve both the force capability and power density. Compared with the conventional PMLMs, the proposed machine features high mass and volume power density, and has the advantages of simple control and low converter cost. The proposed machine topology is applicable to tubular PMLMs with any phases.

Historical and Epistemological Reflections on the Culture of Machines around the Renaissance: Machines, Machineries and Perpetual Motion

Directory of Open Access Journals (Sweden)

Raffaele Pisano

2015-05-01

ancient Greece. Therefore, in the first part, we have examined the relations between the Aristotelian/Euclidean and Archimedean traditions from ancient Greece to the early modern age. In this second part, we analyse the relations of Archimedean tradition/ construction of machines from ancient Greece to the 19th century, focusing on the mentioned period. We remind the reader that our aim is to prove an epistemological thesis, not to provide a complete historical endeavour. As a correlated article, the reader will find three previous paragraphs in the first above-mentioned article (Pisano & Bussotti, 2014a.

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 14 + 15 + 16 from track "Energy Flexibility & Storage".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 14 + 15 + 16 from track "Energy Flexibility & Storage"....

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 4 + 5 + 6 + 7 from track "Building Technologies".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 4 + 5 + 6 + 7 from track "Building Technologies"....

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 34 + 35 +36 from track "Commissioning, Control & Energy Mangement".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 34 + 35 +36 from track "Commissioning, Control & Energy Mangement"....

Thorium Th

International Nuclear Information System (INIS)

Busev, A.I.; Tiptsova, V.G.; Ivanov, V.M.

1978-01-01

The basic methods for extracting thorium from monazites and determining it photometrically and complexometrically are described. Monazite is decomposed by fusion with sodium peroxide, then thorium and the totality of lanthanides are precipitated in the form of oxalates. After the oxalates have been broken down, thorium is determined photometrically with the aid of arsenazo 1, quercetin of 1-2(-pyridylazo)-resorcin. It takes 25 to 30 minutes to photometrically determine Th in monazites with the aid of arsenazo 2 (error: 3 to 5%). Arsenazo 2 is recommended for analysis of monazites containing 20 to 30% of lanthanides. Arsenazo 3 permits determining Th in zircon and in Nb-containing materials. In this case, the determination is possible in strongly acidic solutions, the ratio of arsenazo 3 to Th being 7.5:1. Arsenazo 3 can also be used in determining trace amounts of Th (1x10 -5 to 1x10 -4 %) in rocks, as well as in extraction-photometric determination of Th traces. The dyed compound of Th with arsenazo 3 is extracted with isoamyl alcohol in the presence of diphenylguanidinium chloride and monochloroacetic acid. The method permits determining Th at 1:5x10 8 (0.002 g/ml) dilution. Also described is the iodate-complexometric method for determining Th

Proceedings of the International Conference on Educational Data Mining (EDM) (8th, Madrid, Spain, June 26-29, 2015)

Science.gov (United States)

Santos, Olga Cristina, Ed.; Boticario, Jesus Gonzalez, Ed.; Romero, Cristobal, Ed.; Pechenizkiy, Mykola, Ed.; Merceron, Agathe, Ed.; Mitros, Piotr, Ed.; Luna, Jose Maria, Ed.; Mihaescu, Cristian, Ed.; Moreno, Pablo, Ed.; Hershkovitz, Arnon, Ed.; Ventura, Sebastian, Ed.; Desmarais, Michel, Ed.

2015-01-01

The 8th International Conference on Educational Data Mining (EDM 2015) is held under auspices of the International Educational Data Mining Society at UNED, the National University for Distance Education in Spain. The conference held in Madrid, Spain, July 26-29, 2015, follows the seven previous editions (London 2014, Memphis 2013, Chania 2012,…

Academic stress-induced changes in Th1- and Th2-cytokine response

Directory of Open Access Journals (Sweden)

Areej M. Assaf

2017-12-01

Full Text Available Psychological stress stimulates physiological responses releasing catecholamines and corticoids, which act via corresponding receptors on immune cells, producing a shift in the cytokine balance. These responses are variable depending on the nature of stressors. The effect of the academic stress on the production of the Th1-cytokines (TNF-α, IFN-γ, IL-1β, IL-2, IL-6 and IL-8 and Th2-cytokines (IL-1ra, IL-4, IL-5 and IL-10 on 35 medical/health sciences students after completing their questionnaires was investigated. Blood samples were taken at three stages; baseline stage at the beginning, midterm and final academic examination stages. Plasma cortisol and cytokines were measured during the three stages. The last two stages were compared with the baseline non-stress period. Results of the stress induced during the final examination stage were the highest with a significant increase in cortisol release, IL-4, IL-5 and IL-1ra release with a shift in Th1:Th2 cytokines balance towards Th2. Whereby, the midterm stage did not show significant reduction in Th1-cytokines except for TNF-α, with an increase in IFN-γ level that was reduced in the third stage. Th2 cytokine, IL-1ra, had positive correlations with Th1 cytokines; IL-2 and IFN-γ in the second stage and IL-6 cytokine in the third stage. Cortisol was positively correlated with IL-8 in the last stage and heart rates had negative correlation with IL-10 in the first and last stages. Findings of this study indicate that exam stress down-regulates Th1 with a selective up-regulation of Th2-cytokines. In conclusion, Cortisol might have a role in suppressing the release of Th1- mediated cellular immune response which could increase the vulnerability among the students to infectious diseases.

Academic stress-induced changes in Th1- and Th2-cytokine response.

Science.gov (United States)

Assaf, Areej M; Al-Abbassi, Reem; Al-Binni, Maysaa

2017-12-01

Psychological stress stimulates physiological responses releasing catecholamines and corticoids, which act via corresponding receptors on immune cells, producing a shift in the cytokine balance. These responses are variable depending on the nature of stressors. The effect of the academic stress on the production of the Th1-cytokines (TNF-α, IFN-γ, IL-1β, IL-2, IL-6 and IL-8) and Th2-cytokines (IL-1ra, IL-4, IL-5 and IL-10) on 35 medical/health sciences students after completing their questionnaires was investigated. Blood samples were taken at three stages; baseline stage at the beginning, midterm and final academic examination stages. Plasma cortisol and cytokines were measured during the three stages. The last two stages were compared with the baseline non-stress period. Results of the stress induced during the final examination stage were the highest with a significant increase in cortisol release, IL-4, IL-5 and IL-1ra release with a shift in Th1:Th2 cytokines balance towards Th2. Whereby, the midterm stage did not show significant reduction in Th1-cytokines except for TNF-α, with an increase in IFN-γ level that was reduced in the third stage. Th2 cytokine, IL-1ra, had positive correlations with Th1 cytokines; IL-2 and IFN-γ in the second stage and IL-6 cytokine in the third stage. Cortisol was positively correlated with IL-8 in the last stage and heart rates had negative correlation with IL-10 in the first and last stages. Findings of this study indicate that exam stress down-regulates Th1 with a selective up-regulation of Th2-cytokines. In conclusion, Cortisol might have a role in suppressing the release of Th1- mediated cellular immune response which could increase the vulnerability among the students to infectious diseases.

T-cell clones from Th1, Th17 or Th1/17 lineages and their signature cytokines have different capacity to activate endothelial cells or synoviocytes.

Science.gov (United States)

Lavocat, Fabien; Maggi, Laura; Annunziato, Francesco; Miossec, Pierre

2016-12-01

To compare the direct effect of cytokines on synoviocytes and endothelial cells to the effects of supernatants from Th1, Th17 and Th1/17 clones and the direct cell-cell interactions with the same clones. Th17 and Th1/17 clones were obtained from the CD161+CCR6+ fraction and Th1 clones from the CD161-CCR6- fraction of human CD4+ T-cells. Endothelial cells or synoviocytes were cultured in the presence of either isolated pro-inflammatory cytokines (IL-17 and/or TNF-α) or supernatants from the T-cell clones or co-cultured with T-cell clones themselves. IL-6 and IL-8 expression and production were analyzed. IL-17 and TNF-α induced IL-6 and IL-8 expression, although IL-17 alone had a limited effect on endothelial cells compared to synoviocytes. Supernatants from activated T-helper clones also induced IL-6 and IL-8 expression but with discrepancies between endothelial cells and synoviocytes. Endothelial cells were mostly activated by Th1 clone supernatants whereas synoviocytes were activated by all T-cell subtypes. Finally, cell-cell contact experiments showed a great heterogeneity among cell clones, even from the same lineage. IL-6 expression was mostly induced by contact with Th1 clones both in endothelial and mesenchymal cells whereas IL-8 expression was induced by all T-cell clones whatever their phenotype. We showed that endothelial cells were much more sensitive to Th1 activation whereas synoviocytes were activated by all T-helper lineages. This work highlights the heterogeneity of interactions between T-cells and stromal cells through soluble factors or direct cell contact. Copyright © 2016 Elsevier Ltd. All rights reserved.

Batf3-dependent CD8α+ Dendritic Cells Aggravates Atherosclerosis via Th1 Cell Induction and Enhanced CCL5 Expression in Plaque Macrophages.

Science.gov (United States)

Li, Yalin; Liu, Xueyan; Duan, Wei; Tian, Hua; Zhu, Guangming; He, Hao; Yao, Shutong; Yi, Shuying; Song, Wengang; Tang, Hua

2017-04-01

Dendritic cells (DCs) play an important role in controlling T cell-mediated adaptive immunity in atherogenesis. However, the role of the basic leucine zipper transcription factor, ATF-like 3 (Batf3)-dependent CD8α + DC subset in atherogenesis remains unclear. Here we show that Batf3 -/- Apoe -/- mice, lacking CD8α + DCs, exhibited a significant reduction in atherogenesis and T help 1 (Th1) cells compared with Apoe -/- controls. Then, we found that CD8α + DCs preferentially induce Th1 cells via secreting interleukin-12 (IL-12), and that the expression of interferon-gamma (IFN-γ)or chemokine (C-C motif) ligand 5 (CCL5) in aorta were significantly decreased in Batf3 -/- Apoe -/- mice. We further demonstrated that macrophages were the major CCL5-expressing cells in the plaque, which was significantly reduced in Batf3 -/- Apoe -/- mice. Furthermore, we found CCL5 expression in macrophages was promoted by IFN-γ. Finally, we showed that Batf3 -/- Apoe -/- mice displayed decreased infiltration of leukocytes in the plaque. Thus, CD8α + DCs aggravated atherosclerosis, likely by inducing Th1 cell response, which promoted CCL5 expression in macrophages and increased infiltration of leukocytes and lesion inflammation. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Contributions to the 12th. International Cryogenic Engineering Conference

International Nuclear Information System (INIS)

Anon.

1988-01-01

The report consists of two papers read at the 12 th International Cryogenic Engineering Conference Held in Southampton from 12 to 15 July 1988. The first deals with the design of a conductor for NET machine; the second one gives the description of the liquid Nitrogen cooling system of the FTU tokamak

Machinability of IPS Empress 2 framework ceramic.

Science.gov (United States)

Schmidt, C; Weigl, P

2000-01-01

Using ceramic materials for an automatic production of ceramic dentures by CAD/CAM is a challenge, because many technological, medical, and optical demands must be considered. The IPS Empress 2 framework ceramic meets most of them. This study shows the possibilities for machining this ceramic with economical parameters. The long life-time requirement for ceramic dentures requires a ductile machined surface to avoid the well-known subsurface damages of brittle materials caused by machining. Slow and rapid damage propagation begins at break outs and cracks, and limits life-time significantly. Therefore, ductile machined surfaces are an important demand for machine dental ceramics. The machining tests were performed with various parameters such as tool grain size and feed speed. Denture ceramics were machined by jig grinding on a 5-axis CNC milling machine (Maho HGF 500) with a high-speed spindle up to 120,000 rpm. The results of the wear test indicate low tool wear. With one tool, you can machine eight occlusal surfaces including roughing and finishing. One occlusal surface takes about 60 min machining time. Recommended parameters for roughing are middle diamond grain size (D107), cutting speed v(c) = 4.7 m/s, feed speed v(ft) = 1000 mm/min, depth of cut a(e) = 0.06 mm, width of contact a(p) = 0.8 mm, and for finishing ultra fine diamond grain size (D46), cutting speed v(c) = 4.7 m/s, feed speed v(ft) = 100 mm/min, depth of cut a(e) = 0.02 mm, width of contact a(p) = 0.8 mm. The results of the machining tests give a reference for using IPS Empress(R) 2 framework ceramic in CAD/CAM systems. Copyright 2000 John Wiley & Sons, Inc.

6th iTi Conference

CERN Document Server

Kampers, Gerrit; Oberlack, Martin; Wacławczyk, Marta; Talamelli, Alessandro

2016-01-01

This volume collects the edited and reviewed contributions presented in the 6th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume has been produced after the conference so that the authors had the possibility to incorporate comments and discussions raised during the meeting. In the present book the contributions have been structured according to the topics : I Theory II Wall bounded flows III Particles in flows IV Free flows V Complex flows The volume is dedicated to the memory of Prof. Konrad Bajer who prematurely passed away in Warsaw on August 29, 2014. .

Proceedings of the Conference of the International Group for the Psychology of Mathematics Education (25th, Utrecht, The Netherlands, July 12-17, 2001). Volumes 1-4.

Science.gov (United States)

van den Heuvel-Panhuizen, Marja, Ed.

This document contains the proceedings of the 25th annual Conference of the International Group for the Psychology of Mathematics Education (PME). It features plenary lectures, research forums, discussion groups, working sessions, short oral communications, and poster presentations. Papers in Volume 1 include: (1) "The P in PME: Progress and…

AGS 20th anniversary celebration

Energy Technology Data Exchange (ETDEWEB)

Baggett, N.V. (ed.)

1980-05-22

On May 22, 1980, a symposium was held at Brookhaven to celebrate the 20th birthday of the AGS, to recall its beginnings, and to review major discoveries that have been made with its beams. The talks at the symposium are recorded in this volume.

AGS 20th anniversary celebration

International Nuclear Information System (INIS)

Baggett, N.V.

1980-01-01

On May 22, 1980, a symposium was held at Brookhaven to celebrate the 20th birthday of the AGS, to recall its beginnings, and to review major discoveries that have been made with its beams. The talks at the symposium are recorded in this volume

Biodiversity Monitoring Using NGS Approaches on Unusual Substrates (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)

Energy Technology Data Exchange (ETDEWEB)

Gilbert, Tom

2013-03-01

Tom Gilbert of the Natural History Museum of Denmark on "Biodiversity monitoring using NGS approaches on unusual substrates" at the 8th Annual Genomics of Energy & Environment Meeting in Walnut Creek, Calif.

Kristeva's Thérèse: Mysticism and Modernism

Directory of Open Access Journals (Sweden)

Carol Mastrangelo Bové

2013-05-01

Full Text Available This essay focuses on Julia Kristeva’s recent volume Thérèse mon amour:  Sainte Thérèse d’Avila (2008, describing and placing this blend of novel, play, psychoanalytic cultural theory, and case history in the context of her work.  I argue that the volume contributes to an understanding of religion’s impact—especially Catholic mysticism--on Western categories of women.  I address in particular Thérèse’s mysticism and modernist use of a feminine figure to subvert practices threatening the vitality of the psyche and of social relations.  As in Kristeva’s earlier writing, her psychoanalytic approach to Catholicism’s influence continues to raise questions concerning the apparent stereotypes the approach may feed, especially that of the masochistic woman.

The machine body metaphor: From science and technology to physical education and sport, in France (1825-1935).

Science.gov (United States)

Gleyse, J

2013-12-01

The long history of the conception of physical exercise in France may be viewed as a function of a series of changes in understanding the body. Scientific concepts were used to present the body in official texts by authors specializing in the subject, or to describe them, as did Michel Foucault, as epistemic changes. A departure occurred during the 19th century that is clearly demonstrated in the writings of Gustave Adolphe Hirn. This breakthrough concerned the idea of considering the organism as an energy-generating machine. This metaphor was employed in describing the body during physical exercise from the 17th to the 19th centuries, when the body was thought of as mechanical. Such metaphors were used by the most relevant figures writing at the end of the 19th century in the rationale that is examined in this paper. It shows how Hirn, Marey, Lagrange, Demenij, Hebert, and Tissié saw the body and how they employed machine metaphors when referring to it. These machine metaphors are analyzed from the time of their scientific and technological origins up to their current use in physical and sports education. This analysis will contribute to the understanding of how a scientific metaphor comes to be in common use and may lead to particular exercise practices. © 2012 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

FOREWORD: 26th IAHR Symposium on Hydraulic Machinery and Systems

Science.gov (United States)

Wu, Yulin; Wang, Zhengwei; Liu, Shuhong; Yuan, Shouqi; Luo, Xingqi; Wang, Fujun

2012-11-01

the value of hydraulic machinery to the end user, to the societies, and to improve societies understanding and appreciation of that value. The series of IAHR Symposia on Hydraulic Machinery and Cavitation started with the 1st edition in Nice, France, 1960. For the past decade, all the symposia have focused on an extended portfolio of topics under the name of 'Hydraulic Machinery and Systems', such as the 20th edition in Charlotte, USA, 2000, the 21st in Lausanne, Switzerland, 2002, the 22nd in Stockholm, Sweden, 2004, the 23rd in Yokohama, Japan, 2006, the 24th in Foz do Iguassu, Brasil, 2008, and the 25th in Timisoara, Romania, 2010. The 26th IAHR Symposium on Hydraulic Machinery and Systems brings together more than 250 scientists and researchers from 25 countries, affiliated with universities, technology centers and industrial firms to debate topics related to advanced technologies for hydraulic machinery and systems, which will enhance the sustainable development of water resources and hydropower production. The Scientific Committee has selected 268 papers, out of 430 abstracts submitted, on the following topics: (i) Hydraulic Turbines and Pumps, (ii) Sustainable Hydropower, (iii) Hydraulic Systems, (iv) Advances in Computational and Experimental Techniques, (v) Application in Industries and in Special Conditions, to be presented at the symposium and to be included in the proceedings. All the papers, published in this Volume 15 of IOP Conference Series: Earth and Environmental Science, have been peer reviewed through processes administered by the editors of the 26th IAHR Symposium on Hydraulic Machinery and Systems proceedings, those are Yulin Wu, Zhengwei Wang, Shuhong Liu, Shouqi Yuan, Xingqi Luo and Fujun Wang. We sincerely hope that this edition of the symposium will be a significant step forward in the worldwide efforts to address the present challenges facing the modern Hydraulic Machinery and Systems. Professor Yulin Wu Chairman of the Organizing Committee

Machining of a bioactive nanocomposite orthopedic fixation device.

Science.gov (United States)

Sparnell, Amie; Aniket; El-Ghannam, Ahmed

2012-08-01

Bioactive ceramics bond to bone and enhance bone formation. However, they have poor mechanical properties which restrict their machinability as well as their application as load bearing implants. The goal of this study was to machine bioactive fixation screws using a silica-calcium phosphate nanocomposite (SCPC50). The effect of compact pressure, holding time, and thermal treatment on the microstructure, machinability, and mechanical properties of SCPC50 cylinders were investigated. Samples prepared by powder metallurgy technique at compact pressure range of 100-300 MPa and treated at 900°C/1 h scored a poor machinability rating of (1/5) due to the significant formation of amorphous silicate phase at the grain boundaries. On the other hand, lowering of compact pressure and sintering temperature to 30 MPa/3 h and 700°C/2 h, respectively, minimized the formation of the amorphous phase and raised the machinability rating to (5/5). The modulus of elasticity and ultimate strength of machinable SCPC50 were 10.8 ± 2.0 GPa and 72.8 ± 22.8 MPa, respectively, which are comparable to the corresponding values for adult human cortical bone. qRT-PCR analyses showed that bone cells attached to SCPC50 significantly upregulated osteocalcin mRNA expression as compared to the cells on Ti-6Al-4V. Moreover, cells attached to SCPC50 produced mineralized bone-like tissue within 8 days. On the other hand, cells attached to Ti-6Al-4V failed to produce bone mineral under the same experimental conditions. Results of the study suggest that machinable SCPC50 has the potential to serve as an attractive new material for orthopedic fixation devices. Copyright © 2012 Wiley Periodicals, Inc.

Croatian Chemistry in the 20th Century. II. From the Collapse of Independent State of Croatia on May 8th, 1945 to the Establishment of the Republic of Croatia on June 25th, 1991

Directory of Open Access Journals (Sweden)

Vancik, H.

2009-07-01

Full Text Available The development of Croatian chemistry from the end of the Second World War to the establishment of the Republic of Croatia is outlined. Briefly discussed is the founding and development of the Chemistry Department of the Faculty of Natural Sciences and Mathematics, and the Rugjer Bošković Institute. Also presented is the postwar structure and organization of the chemical-technological study at the Technical Faculty and later at the Faculty of Technology. The chemical lectures and research in chemistry at the Faculty of Nutrition and Biotechnology, Faculty of Pharmacy and Biochemistry, Faculty of Medicine, Faculty of Veterinary Medicine, Facultyof Agronomy and Faculty of Forestry are reviewed. This article follows logically our first article in this series entitled Croatian Chemistry in the 20th Century. I. From the Turn of the Century to May 8,th 1945 (Kem. Ind. 56 (2007 403–416.

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 24 + 25 +26 + 27 + 28 +29 + 30 from track "Building Performance".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 24 + 25 +26 + 27 + 28 +29 + 30 from track "Building Performance"....

21 CFR 868.5160 - Gas machine for anesthesia or analgesia.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Gas machine for anesthesia or analgesia. 868.5160... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5160 Gas machine for anesthesia or analgesia. (a) Gas machine for anesthesia—(1) Identification. A gas machine for anesthesia is a...

Nuclear materials 1993 annual report. Volume 8, No. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1993. The report is published in two parts. NUREG-1272, Vol. 8, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC`s Operations Center. NUREG-1272, Vol. 8, No. 2, covers nuclear materials and presents a review of the events and concerns during 1993 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Note that the subtitle of No. 2 has been changed from ``Nonreactors`` to ``Nuclear Materials.`` Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from 1980 through 1993.

Nuclear materials 1993 annual report. Volume 8, No. 2

International Nuclear Information System (INIS)

1995-05-01

This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1993. The report is published in two parts. NUREG-1272, Vol. 8, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol. 8, No. 2, covers nuclear materials and presents a review of the events and concerns during 1993 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Note that the subtitle of No. 2 has been changed from ''Nonreactors'' to ''Nuclear Materials.'' Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from 1980 through 1993

7th WACBE World Congress on Bioengineering 2015

CERN Document Server

Lim, Chwee

2015-01-01

This volume publishes the proceedings of the WACBE World Congress on Bioengineering 2015 (WACBE 2015), which was be held in Singapore, from 6 to 8 July 2015. The World Association for Chinese Biomedical Engineers (WACBE) organizes this World Congress biannually. Our past congresses have brought together many biomedical engineers from over the world to share their experiences and views on the future development of biomedical engineering. The 7th WACBE World Congress on Bioengineering 2015 in Singapore continued to offer such a networking platform for all biomedical engineers. Hosted by the Biomedical Engineering Society (Singapore) and the Department of Biomedical Engineering, National University of Singapore, the congress covered all related areas in bioengineering.

Results and problems in the development of machines employed in pressing technology

Energy Technology Data Exchange (ETDEWEB)

Dietrich, P; Hinne, H; Linke, L; Nerger, R

1980-08-01

Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)

Abstracts of oral and poster presentations given at the 8th International Workshop on Grapevine Trunk Diseases, Valencia, Spain, 18–21 June 2012

Directory of Open Access Journals (Sweden)

AA. VV.

2012-09-01

Full Text Available The 8th International Workshop on Grapevine Trunk Diseases was held in Valencia, Spain, on June 18–21 2012. The meeting was attended by 120 participants and 103 papers were presented either as oral or poster presentations in four sessions: Pathogen Detection and Characterization, Epidemiology, Host-Pathogen Interaction and Disease Management. A special session was dedicated on implications of trunk diseases for grapevine nurseries with five invited presentations, followed by several oral and poster presentations. A field trip to the Utiel-Requena wine-producing area was undertaken on June the 20th, including visits to vineyards and a winery. The workshop is the 8th organised by members of the International Council on Grapevine Trunk Diseases (www.icgtd.org, a subject matter committee of the International Society for Plant Pathology (www.isppweb.org.

Analysis of machining and machine tools

CERN Document Server

Liang, Steven Y

2016-01-01

This book delivers the fundamental science and mechanics of machining and machine tools by presenting systematic and quantitative knowledge in the form of process mechanics and physics. It gives readers a solid command of machining science and engineering, and familiarizes them with the geometry and functionality requirements of creating parts and components in today’s markets. The authors address traditional machining topics, such as: single and multiple point cutting processes grinding components accuracy and metrology shear stress in cutting cutting temperature and analysis chatter They also address non-traditional machining, such as: electrical discharge machining electrochemical machining laser and electron beam machining A chapter on biomedical machining is also included. This book is appropriate for advanced undergraduate and graduate mechani cal engineering students, manufacturing engineers, and researchers. Each chapter contains examples, exercises and their solutions, and homework problems that re...

Factors Predicting Mathematics Achievement of 8th Graders in TIMSS 2015

Directory of Open Access Journals (Sweden)

Mehmet Hayri SARI

2017-09-01

Full Text Available In the study, it is aimed to investigate the student, teacher and school factors predicting mathematics achievement of Turkish 8th grade students in TIMSS 2015. The group of the study consists of 6079 students and 220 teachers who attended TIMSS from Turkey. The data of the study was obtained from student and teacher questionnaires and mathematics cognitive test scores. In the data analysis, multilevel regression analysis was used in which dependent variables were plausible mathematics scores and independent variables were student, teacher and school scale scores. According to results, 34% percent of student-level variance was explained by student-level variables. It was found that self-confidence level of students was the most important predictor of mathematics achievement among student-level variables. Additionally, educational resources at home variable was also among the important predictors of mathematics achievement. Teacher and school factors explained 29% of between school variance. Among these variables, school emphasis on academic success and teaching limited by student needs were two significant variables that could predict mathematics achievement of students.

Design Control Systems of Human Machine Interface in the NTVS-2894 Seat Grinder Machine to Increase the Productivity

Science.gov (United States)

Ardi, S.; Ardyansyah, D.

2018-02-01

In the Manufacturing of automotive spare parts, increased sales of vehicles is resulted in increased demand for production of engine valve of the customer. To meet customer demand, we carry out improvement and overhaul of the NTVS-2894 seat grinder machine on a machining line. NTVS-2894 seat grinder machine has been decreased machine productivity, the amount of trouble, and the amount of downtime. To overcome these problems on overhaul the NTVS-2984 seat grinder machine include mechanical and programs, is to do the design and manufacture of HMI (Human Machine Interface) GP-4501T program. Because of the time prior to the overhaul, NTVS-2894 seat grinder machine does not have a backup HMI (Human Machine Interface) program. The goal of the design and manufacture in this program is to improve the achievement of production, and allows an operator to operate beside it easier to troubleshoot the NTVS-2894 seat grinder machine thereby reducing downtime on the NTVS-2894 seat grinder machine. The results after the design are HMI program successfully made it back, machine productivity increased by 34.8%, the amount of trouble, and downtime decreased 40% decrease from 3,160 minutes to 1,700 minutes. The implication of our design, it could facilitate the operator in operating machine and the technician easer to maintain and do the troubleshooting the machine problems.

Study on the High Volume Reduction of Radioactive Wastes

Energy Technology Data Exchange (ETDEWEB)

Kim, Ki Hong; Sik, Kang Il; Seok, Hong Dae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Ho, Jeon Gil [RADIN Co. Ltd., Daejeon (Korea, Republic of)

2013-10-15

The solidification of radioactive wastes by the mixing method always increases their volume due to the limitation of incorporation ratio (waste/solidification agent). But if the powdered wastes can be compacted as the high density pellets and also the pellets can be filled up in a waste drum as much as possible while solidifying them with a very sticky solidification agent including a void formed in the filling step of pellets, it might be more desirable to reduce the waste volume as compared with the mixing method. So in this study, we designed and manufactured a high volume reduction machine which has the special size and shape of a pellet pocket, which the pellets can be extracted from easily and filled up in a large amount in drum, a pressurizing device to press 2 rolls, and the uniform feeding device of powder to the roll tyre. Some operational parameters which affect the formation of pellets from a powder were investigated, and then the volume reduction of a powder was evaluated. The briquetting machine, popular in general industry, was modified to apply for the volume reduction of the powered radioactive wastes (dried concentrate, sludge, spent ion-exchange resin, ash, depleted uranium powder, and etc.). In this developed high volume reduction machine, the capacity was 25 ∼ 62.5 kg/h at the optimum conditions, and the estimated volume reduction was about 2.95 (2.74/0.93) on the basis of between a powder (bulk density = 0.93 g/cm{sup 3}) and the pellet (2.74 g/cm{sup 3}). But on the basis of 200L drum, the calculated volume reduction was about 1.34 in consideration of a void volume originated in the filling step of the pellets.

CLIMA 2016 - proceedings of the 12th REHVA World Congress

DEFF Research Database (Denmark)

CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 17 + 18 + 19 + 20 +21 + 22 + 23 from track "Ventilation & Air Distribution".......CLIMA 2016, 12th REHVA World Congress 2016 in Aalborg north of Denmark. Full reviewed papers presented at CLIMA 2016 is published in the conference proceedings. This volume contains the sessions number 17 + 18 + 19 + 20 +21 + 22 + 23 from track "Ventilation & Air Distribution"....

Proceedings of the Combined 20th International Workshop on Expressiveness in Concurrency and 10th Workshop on Structural Operational Semantics (EXPRESS/SOS 2013, Buenos Aires, Argentina, August 26, 2013)

NARCIS (Netherlands)

Borgström, J.; Luttik, B.

2013-01-01

This volume contains the proceedings of the Combined 20th International Workshop on Expressiveness in Concurrency and the 10th Workshop on Structural Operational Semantics (EXPRESS/SOS 2013) which was held on 26th August, 2013 in Buenos Aires, Argentina, as an affiliated workshop of CONCUR 2013, the

Regulation strategies of contemporary school life: an analysis of the 8th brazilian teacher prize

Directory of Open Access Journals (Sweden)

Clarice Salete Traversini

2017-02-01

Full Text Available This paper aims to analyze some regulation strategies of contemporary school life taking place under the neoliberal governmentality in Brazil according to authors such as Foucault (2008, Veiga-Neto & Saraiva (2011 and Young (2011, and researchers of teacher education and contemporary teaching, such as Nóvoa (2009, 2012 and Silva (2014. The publication of the 8th Brazilian Teacher Prize, 2014 edition, with 39 teachers awarded, and the syntheses of the winning projects were selected for analysis. The question raised is which regulation strategies of contemporary school life are present in the set of projects in the 8th edition of the Brazilian Teacher Prize? Two regulation strategies of contemporary school life have been identified. In one of them, called pedagogy of protections, according to Silva (2014, knowledge related to social issues is central. The other one concerns the emphasis given on full-time education, which takes place by extending school hours, as a means for the early intervention of students in social issues. Based on Nóvoa (2013, the authors have proposed the refocusing of school roles by considering the appropriation of school knowledge as central to school. An intersectoral coordination is needed so that the political pedagogical project and school daily actions can be planned along with other social agencies that assist to the community. This enables the partner sectors to perform protection roles, and both the school and the teachers are able to focus on their specific functions, i.e. teaching and educating in the full sense of education.

Small machine tools for small workpieces final report of the DFG priority program 1476

CERN Document Server

Sanders, Adam

2017-01-01

This contributed volume presents the research results of the program “Small machine tools for small work pieces” (SPP 1476), funded by the German Research Society (DFG). The book contains the final report of the priority program, presenting novel approached for size-adapted, reconfigurable micro machine tools. The target audience primarily comprises research experts and practitioners in the field of micro machine tools, but the book may also be beneficial for graduate students.

Change of mean platelet volume values in asthmatic children as an inflammatory marker.

Science.gov (United States)

Tuncel, T; Uysal, P; Hocaoglu, A B; Erge, D O; Karaman, O; Uzuner, N

2012-01-01

Asthma is the most common chronic disease of childhood in industrialised countries. T helper-2 (Th-2) cells, mast cells and eosinophils have a role in inflammation of asthma. Recently it was shown that platelets also play a role in asthma. Mean platelet volume shows platelet size and reflects platelet activation. The aim of this retrospective study is to evaluate levels of mean platelet volume in asthmatic patients during asymptomatic periods and exacerbations compared with healthy controls. The study consisted of 100 asthmatic patients (male/female: 55/45, mean age: 8.2±3.3) and 49 age and sex matched healthy children as a control group. Mean platelet volume values of asthmatic patients during asymptomatic period were 7.7±0.8fL while mean platelet volume values in asthmatics during exacerbation were 7.8±0.9fL. Comparison of mean platelet volume values of asthmatic patients and healthy controls both in acute asthmatic attack and asymptomatic period showed no difference (p>0.05). Comparison of mean platelet volume values at asthmatic attack and asymptomatic period also had no difference (p>0.05). The presence of atopy, infection, eosinophilia, elevated immunoglobulin E, and severity of acute asthmatic attack did not influence mean platelet volume values. The results of our study suggest that mean platelet volume values may not be used as a marker in bronchial asthma, although prospective studies with larger number of patients are needed to evaluate the role of mean platelet volume in asthma. Copyright © 2011 SEICAP. Published by Elsevier Espana. All rights reserved.

Predictors of cultural capital on science academic achievement at the 8th grade level

Science.gov (United States)

Misner, Johnathan Scott

The purpose of the study was to determine if students' cultural capital is a significant predictor of 8th grade science achievement test scores in urban locales. Cultural capital refers to the knowledge used and gained by the dominant class, which allows social and economic mobility. Cultural capital variables include magazines at home and parental education level. Other variables analyzed include socioeconomic status (SES), gender, and English language learners (ELL). This non-experimental study analyzed the results of the 2011 Eighth Grade Science National Assessment of Educational Progress (NAEP). The researcher analyzed the data using a multivariate stepwise regression analysis. The researcher concluded that the addition of cultural capital factors significantly increased the predictive power of the model where magazines in home, gender, student classified as ELL, parental education level, and SES were the independent variables and science achievement was the dependent variable. For alpha=0.05, the overall test for the model produced a R2 value of 0.232; therefore the model predicted 23.2% of variance in science achievement results. Other major findings include: higher measures of home resources predicted higher 2011 NAEP eighth grade science achievement; males were predicted to have higher 2011 NAEP 8 th grade science achievement; classified ELL students were predicted to score lower on the NAEP eight grade science achievement; higher parent education predicted higher NAEP eighth grade science achievement; lower measures of SES predicted lower 2011 NAEP eighth grade science achievement. This study contributed to the research in this field by identifying cultural capital factors that have been found to have statistical significance on predicting eighth grade science achievement results, which can lead to strategies to help improve science academic achievement among underserved populations.

Machine learning \\& artificial intelligence in the quantum domain

OpenAIRE

Dunjko, Vedran; Briegel, Hans J.

2017-01-01

Quantum information technologies, and intelligent learning systems, are both emergent technologies that will likely have a transforming impact on our society. The respective underlying fields of research -- quantum information (QI) versus machine learning (ML) and artificial intelligence (AI) -- have their own specific challenges, which have hitherto been investigated largely independently. However, in a growing body of recent work, researchers have been probing the question to what extent th...

8th Swiss National Photovoltaics Congress. Conference proceedings

International Nuclear Information System (INIS)

Nowak, S.

2010-01-01

These congress proceedings contain the presentations made at the two-day 8 th Swiss National Photovoltaics Conference held in Winterthur, Switzerland, in February 2010. The presentations were grouped into six sessions. The first session dealt with promotional activities for photovoltaics (PV) in Switzerland. The presentations dealt with the present state of PV promotion, the cantonal support program in Basle and the Swiss photovoltaics market in a global context. The session was rounded off with a podium discussion on the Swiss cost-covering remuneration system for solar power. This theme was looked at in more detail in the second session of the conference; successes and hindrances in the system were discussed as well as an example of an alternative solar power 'exchange'. The third session looked at building-integration of PV systems; facade and roof integration and the use of flexible solar cells were discussed. The second day of the conference featured three further sessions. The first session dealt with transfer of know-how from research institutes to industry. A general overview was presented and specific examples of successful know-how transfer were reported on. The next session dealt with the great challenges presented by the efforts being made to expand the use of PV. Safety aspects were discussed, as were the certified testing of modules, mains integration and the training of personnel involved with the implementation of PV systems. The final session looked at the scenarios, perspectives and visions for Swiss and European PV business. PV systems were examined from the point of view of the semiconductor business, European energy planning, the role of PV in future energy supply and the roles of customers, investors and politics on the way to a renewable future.

Chemistry to music: Discovering how Music-based Teaching affects academic achievement and student motivation in an 8th grade science class

Science.gov (United States)

McCammon, William Gavin Lodge, Jr.

Teachers should have access to new and innovative tools in order to engage and motivate their students in the classroom. This is especially important as many students view school as an antiquated and dull environment - which they must seemingly suffer through to advance. School need not be a dreaded environment. The use of music as a tool for learning can be employed by any teacher to create an engaging and exciting atmosphere where students actively participate and learn to value their classroom experience. Through this study, a product and process was developed that is now available for any 8th grade science teacher interested in using music to enhance their content. In this study 8th grade students (n=41) in a public school classroom actively interacted with modern songs created to enhance the teaching of chemistry. Data were collected and analyzed in order to determine the effects that the music treatment had on student achievement and motivation, compared to a control group (n=35). Current literature provides a foundation for the benefits for music listening and training, but academic research in the area of using music as a tool for teaching content was noticeably absent. This study identifies a new area of research called "Music-based Teaching" which results in increases in motivation for 8th grade students learning chemistry. The unintended results of the study are additionally significant as the teacher conducting the treatment experienced newfound enthusiasm, passion, and excitement for her profession.

Fasciola hepatica reinfection potentiates a mixed Th1/Th2/Th17/Treg response and correlates with the clinical phenotypes of anemia

Science.gov (United States)

Perez-Crespo, Ignacio; Chillón-Marinas, Carlos; Khoubbane, Messaoud; Quesada, Carla; Reguera-Gomez, Marta; Mas-Coma, Santiago; Fresno, Manuel; Gironès, Núria

2017-01-01

Background Fascioliasis is a severe zoonotic disease of worldwide extension caused by liver flukes. In human fascioliasis hyperendemic areas, reinfection and chronicity are the norm and anemia is the main sign. Herein, the profile of the Th1/Th2/Th17/Treg expression levels is analyzed after reinfection, correlating them with their corresponding hematological biomarkers of morbidity. Methodology/Principal findings The experimental design reproduces the usual reinfection/chronicity conditions in human fascioliasis endemic areas and included Fasciola hepatica primo-infected Wistar rats (PI) and rats reinfected at 8 weeks (R8), and at 12 weeks (R12), and negative control rats. In a cross-sectional study, the expression of the genes associated with Th1 (Ifng, Il12a, Il12b, Nos2), Th2 (Il4, Arg1), Treg (Foxp3, Il10, Tgfb, Ebi3), and Th17 (Il17) in the spleen and thymus was analyzed. After 20 weeks of primary infection, PI did not present significant changes in the expression of those genes when compared to non-infected rats (NI), but an increase of Il4, Arg1 and Ifng mRNA in the spleen was observed in R12, suggesting the existence of an active mixed Th1/Th2 systemic immune response in reinfection. Foxp3, Il10, Tgfb and Ebi3 levels increased in the spleen in R12 when compared to NI and PI, indicating that the Treg gene expression levels are potentiated in chronic phase reinfection. Il17 gene expression levels in R12 in the spleen increased when compared to NI, PI and R8. Gene expression levels of Il10 in the thymus increased when compared to NI and PI in R12. Ifng expression levels in the thymus increased in all reinfected rats, but not in PI. The clinical phenotype was determined by the fluke burden, the rat body weight and the hemogram. Multivariate mathematical models were built to describe the Th1/Th2/Th17/Treg expression levels and the clinical phenotype. In reinfection, two phenotypic patterns were detected: i) one which includes only increased splenic Ifng

Leprosy in a Lombard-Avar cemetery in central Italy (Campochiaro, Molise, 6th-8th century AD): ancient DNA evidence and demography.

Science.gov (United States)

Rubini, Mauro; Zaio, Paola; Spigelman, Mark; Donoghue, Helen D

2017-09-01

The study of past infectious diseases increases knowledge of the presence, impact and spread of pathogens within ancient populations. Polymerase chain reaction (PCR) was used to examine bones for the presence of Mycobacterium leprae ancient DNA (aDNA) as, even when leprosy is present, bony changes are not always pathognomonic of the disease. This study also examined the demographic profile of this population and compared it with two other populations to investigate any changes in mortality trends between different infectious diseases and between the pre-antibiotic and antibiotic eras. The individuals were from a site in Central Italy (6th-8th CE) and were examined for the presence of Mycobacterium leprae aDNA. In addition, an abridged life mortality table was constructed. Two individuals had typical leprosy palaeopathology, and one was positive for Mycobacterium leprae aDNA. However, the demographic profile shows a mortality curve similar to that of the standard, in contrast to a population that had been subjected to bubonic plague. This study shows that, in the historical population with leprosy, the risk factors for health seem to be constant and distributed across all age classes, similar to what is found today in the antibiotic era. There were no peaks of mortality equivalent to those found in fatal diseases such as the plague, probably due to the long clinical course of leprosy.

Regenerative energies - the environmentally friendly solution. Seminar volume. Pt. 2

International Nuclear Information System (INIS)

Haury, H.J.; Assmann, G.; Froese, B.; Jahn, T.

1995-01-01

The Information Environment organised its 16th journalists seminar on 9th March 1995 in Hamburg. In the second part of the seminar competent scientist gave an overview to the following questions: 1. Renewable energy as an solution from the dead end street? 2. What part of the energy demand could be covered by regenerative energy sources at all? 3. Ecology contra economy? 4. Inexhaustible energy source sun? 5. When do we start to import solar energy from the desert? 6. Move into the energy autarkic solar house in the year 2000? 7. Wind power plant park Germany? 8. Geothermal - component of the energy-mix 2005. The present volume contains the lectures which were given on these subjects. (orig./UA) [de

Volume loss as a tool to assess kiln drying of eucalyptus wood

OpenAIRE

Batista,Djeison Cesar; Klitzke,Ricardo Jorge; Rocha,Márcio Pereira da; Muñiz,Graciela Inez Bolzon de; Batista,Tharcia Ribeiro

2013-01-01

In this study, we aimed to analyze the kiln drying quality of Eucalyptus grandis, Eucalyptus saligna and Eucalyptus dunnii woods with respect to volume loss. Wood from the three species was kiln dried together with the same drying schedule and conditions in a conventional-temperature pilot kiln. Three kinds of volume loss were evaluated: total - from saturated (initial) to machined (final) condition; shrinkage - from saturated to 10% moisture content; and machining - from 10% moisture content...

Investigation of permanent magnet machines for downhole applications: Design, prototype and testing of a flux-switching permanent magnet machine

Energy Technology Data Exchange (ETDEWEB)

Chen, Anyuan

2011-01-15

The current standard electrical downhole machine is the induction machine which is relatively inefficient. Permanent magnet (PM) machines, having higher efficiencies, higher torque densities and smaller volumes, have widely employed in industrial applications to replace conventional machines, but few have been developed for downhole applications due to the high ambient temperatures in deep wells and the low temperature stability of PM materials over time. Today, with the development of variable speed drives and the applications of high temperature magnet materials, it is increasingly interesting for oil and gas industries to develop PM machines for downhole applications. Recently, some PM machines applications have been presented for downhole applications, which are normally addressed on certain specific downhole case. In this thesis the focus has been put on the performance investigation of different PM machines for general downhole cases, in which the machine outer diameter is limited to be small by well size, while the machine axial length may be relatively long. The machine reliability is the most critical requirement while high torque density and high efficiency are also desirable. The purpose is to understand how the special constraints in downhole condition affect the performances of different machines. First of all, three basic machine concepts, which are the radial, axial and transverse flux machines, are studied in details by analytical method. Their torque density, efficiency, power factor and power capability are investigated with respect to the machine axial length and pole number. The presented critical performance comparisons of the machines provide an indication of machines best suitable with respect to performance and size for downhole applications. Conventional radial flux permanent magnet (RFPM) machines with the PMs on the rotor can provide high torque density and high efficiency. This type of machine has been suggested for several different

Distinguished figures in mechanism and machine science

CERN Document Server

2014-01-01

This book is composed of chapters that focus specifically on technological developments by distinguished figures in the history of MMS (Mechanism and Machine Science).  Biographies of well-known scientists are also included to describe their efforts and experiences, and surveys of their work and achievements, and a modern interpretation of their legacy are presented. After the first two volumes, the papers in this third volume again cover a wide range within the field of the History of Mechanical Engineering with specific focus on MMS and will be of interest and motivation to the work (historical or not) of many.

Machine Learning Approaches in Cardiovascular Imaging.

Science.gov (United States)

Henglin, Mir; Stein, Gillian; Hushcha, Pavel V; Snoek, Jasper; Wiltschko, Alexander B; Cheng, Susan

2017-10-01

Cardiovascular imaging technologies continue to increase in their capacity to capture and store large quantities of data. Modern computational methods, developed in the field of machine learning, offer new approaches to leveraging the growing volume of imaging data available for analyses. Machine learning methods can now address data-related problems ranging from simple analytic queries of existing measurement data to the more complex challenges involved in analyzing raw images. To date, machine learning has been used in 2 broad and highly interconnected areas: automation of tasks that might otherwise be performed by a human and generation of clinically important new knowledge. Most cardiovascular imaging studies have focused on task-oriented problems, but more studies involving algorithms aimed at generating new clinical insights are emerging. Continued expansion in the size and dimensionality of cardiovascular imaging databases is driving strong interest in applying powerful deep learning methods, in particular, to analyze these data. Overall, the most effective approaches will require an investment in the resources needed to appropriately prepare such large data sets for analyses. Notwithstanding current technical and logistical challenges, machine learning and especially deep learning methods have much to offer and will substantially impact the future practice and science of cardiovascular imaging. © 2017 American Heart Association, Inc.

Ab initio full charge-density study of the atomic volume of α-phase Fr, Ra, Ac, Th, Pa, U, Np, and Pu

DEFF Research Database (Denmark)

Vitos, Levente; Kollár, J.; Skriver, Hans Lomholt

1997-01-01

We have used a full charge-density technique based on the linear muffin-tin orbitals method in first-principles calculations of the atomic volumes of the light actinides including Fr, Ra, and Ac in their low-temperature crystallographic phases. The good agreement between the theoretical and exper......We have used a full charge-density technique based on the linear muffin-tin orbitals method in first-principles calculations of the atomic volumes of the light actinides including Fr, Ra, and Ac in their low-temperature crystallographic phases. The good agreement between the theoretical...... and experimental values along the series support the picture of itinerant 5f electronic states in Th to Pu. The increased deviation between theory and experiment found in Np and Pu may be an indication of correlation effects not included in the local density approximation....

Machine translation with minimal reliance on parallel resources

CERN Document Server

Tambouratzis, George; Sofianopoulos, Sokratis

2017-01-01

This book provides a unified view on a new methodology for Machine Translation (MT). This methodology extracts information from widely available resources (extensive monolingual corpora) while only assuming the existence of a very limited parallel corpus, thus having a unique starting point to Statistical Machine Translation (SMT). In this book, a detailed presentation of the methodology principles and system architecture is followed by a series of experiments, where the proposed system is compared to other MT systems using a set of established metrics including BLEU, NIST, Meteor and TER. Additionally, a free-to-use code is available, that allows the creation of new MT systems. The volume is addressed to both language professionals and researchers. Prerequisites for the readers are very limited and include a basic understanding of the machine translation as well as of the basic tools of natural language processing.

TH-CD-206-05: Machine-Learning Based Segmentation of Organs at Risks for Head and Neck Radiotherapy Planning

International Nuclear Information System (INIS)

Ibragimov, B; Pernus, F; Strojan, P; Xing, L

2016-01-01

Purpose: Accurate and efficient delineation of tumor target and organs-at-risks is essential for the success of radiotherapy. In reality, despite of decades of intense research efforts, auto-segmentation has not yet become clinical practice. In this study, we present, for the first time, a deep learning-based classification algorithm for autonomous segmentation in head and neck (HaN) treatment planning. Methods: Fifteen HN datasets of CT, MR and PET images with manual annotation of organs-at-risk (OARs) including spinal cord, brainstem, optic nerves, chiasm, eyes, mandible, tongue, parotid glands were collected and saved in a library of plans. We also have ten super-resolution MR images of the tongue area, where the genioglossus and inferior longitudinalis tongue muscles are defined as organs of interest. We applied the concepts of random forest- and deep learning-based object classification for automated image annotation with the aim of using machine learning to facilitate head and neck radiotherapy planning process. In this new paradigm of segmentation, random forests were used for landmark-assisted segmentation of super-resolution MR images. Alternatively to auto-segmentation with random forest-based landmark detection, deep convolutional neural networks were developed for voxel-wise segmentation of OARs in single and multi-modal images. The network consisted of three pairs of convolution and pooing layer, one RuLU layer and a softmax layer. Results: We present a comprehensive study on using machine learning concepts for auto-segmentation of OARs and tongue muscles for the HaN radiotherapy planning. An accuracy of 81.8% in terms of Dice coefficient was achieved for segmentation of genioglossus and inferior longitudinalis tongue muscles. Preliminary results of OARs regimentation also indicate that deep-learning afforded an unprecedented opportunities to improve the accuracy and robustness of radiotherapy planning. Conclusion: A novel machine learning framework

TH-CD-206-05: Machine-Learning Based Segmentation of Organs at Risks for Head and Neck Radiotherapy Planning

Energy Technology Data Exchange (ETDEWEB)

Ibragimov, B [Stanford University, Stanford, CA (United States); Pernus, F [University of Ljubljana, Ljubljana (Slovenia); Strojan, P; Xing, L [Institute of Oncology, Ljubljana (Slovenia)

2016-06-15

Purpose: Accurate and efficient delineation of tumor target and organs-at-risks is essential for the success of radiotherapy. In reality, despite of decades of intense research efforts, auto-segmentation has not yet become clinical practice. In this study, we present, for the first time, a deep learning-based classification algorithm for autonomous segmentation in head and neck (HaN) treatment planning. Methods: Fifteen HN datasets of CT, MR and PET images with manual annotation of organs-at-risk (OARs) including spinal cord, brainstem, optic nerves, chiasm, eyes, mandible, tongue, parotid glands were collected and saved in a library of plans. We also have ten super-resolution MR images of the tongue area, where the genioglossus and inferior longitudinalis tongue muscles are defined as organs of interest. We applied the concepts of random forest- and deep learning-based object classification for automated image annotation with the aim of using machine learning to facilitate head and neck radiotherapy planning process. In this new paradigm of segmentation, random forests were used for landmark-assisted segmentation of super-resolution MR images. Alternatively to auto-segmentation with random forest-based landmark detection, deep convolutional neural networks were developed for voxel-wise segmentation of OARs in single and multi-modal images. The network consisted of three pairs of convolution and pooing layer, one RuLU layer and a softmax layer. Results: We present a comprehensive study on using machine learning concepts for auto-segmentation of OARs and tongue muscles for the HaN radiotherapy planning. An accuracy of 81.8% in terms of Dice coefficient was achieved for segmentation of genioglossus and inferior longitudinalis tongue muscles. Preliminary results of OARs regimentation also indicate that deep-learning afforded an unprecedented opportunities to improve the accuracy and robustness of radiotherapy planning. Conclusion: A novel machine learning framework

Electroweak properties of particle physics. Volume 2

International Nuclear Information System (INIS)

Aleksan, R.; Ellis, N.; Falvard, A.; Fayard, L.; Frere, J.M.; Kuehn, J.H.; Le Yaouanc, A.; Roudeau, P.; Wormser, G.

1991-01-01

The 23th GIf school was held at Ecole Polytechnique, Palaiseau, France from 16 to 20 September 1991. The subject was large: Electroweak properties of heavy quarks. The second part has been devoted to B physics at hadron machines, search for Top, Charm particle physics and Quarkonium physics

8th International Congress on Biocatalysis (Biocat2016), Hamburg, Germany, 28 August - 1 September, 2016 : meeting report

OpenAIRE

Elleuche, Skander; Esselun, Petra; Grote, Ralf; Klippel, Barbara; Krüger, Anna; Liese, Andreas; Ostrop, Margit; Schäfers, Christian; Schröder, Carola; Antranikian, Garabed

2016-01-01

The “8th International Congress on Biocatalysis (biocat2016)” is part of a biennial conference series. Biocatalysis is a topic based on the edge of biology and chemistry, which brings together scientists from the life sciences, engineers and computer scientists. This international conference serves as a platform to meet researchers from all over the world, to find collaboration partners for future projects and to gain novel insights into modern topics and techniques. Biocat covers the most...

Planar measurements of soot volume fraction and OH in a JP-8 pool fire

Energy Technology Data Exchange (ETDEWEB)

Henriksen, Tara L.; Ring, Terry A.; Eddings, Eric G. [Department of Chemical Engineering, University of Utah, Salt Lake City, UT 84112 (United States); Nathan, Graham J. [School of Mechanical Engineering, University of Adelaide, SA 5005 (Australia); Alwahabi, Zeyad T.; Qamar, Nader [School of Chemical Engineering, University of Adelaide, SA 5005 (Australia)

2009-07-15

The simultaneous measurement of soot volume fraction by laser induced incandescence (LII) and qualitative imaging of OH by laser induced fluorescence (LIF) was performed in a JP-8 pool fire contained in a 152 mm diameter pan. Line of sight extinction was used to calibrate the LII system in a laminar flame, and to provide an independent method of measuring average soot volume fraction in the turbulent flame. The presence of soot in the turbulent flame was found to be approximately 50% probable, resulting in high levels of optical extinction, which increased slightly through the flame from approximately 30% near the base, to approximately 50% at the tip. This high soot loading pushes both techniques toward their detection limit. Nevertheless, useful accuracy was obtained, with the LII measurement of apparent extinction in the turbulent flame being approximately 21% lower than a direct measurement, consistent with the influence of signal trapping. The axial and radial distributions of soot volume fraction are presented, along with PDFs of volume fraction, and new insight into the behavior of soot sheets in pool fires are sought from the simultaneous measurements of OH and LII. (author)

International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines

CERN Document Server

Belyaev, Alexander; Krommer, Michael

2017-01-01

The papers in this volume present and discuss the frontiers in the mechanics of controlled machines and structures. They are based on papers presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines held in Vienna in September 2015. The workshop continues a series of international workshops held in Linz (2008) and St. Petersburg (2010).

Symposium Festschrift Hughes (Vernon W) to Celebrate his 70th birthday

CERN Document Server

1992-01-01

The contents of this book are derived from a celebration of the 70th birthday of Vernon W Hughes. Professor Hughes' career has touched on several areas in modern physics ranging from precision measurements of the fundamental properties of atoms to measurements of spin structure functions of the proton via deep inelastic muon scattering at the world's highest energy fixed target machines. This observance of his 70th birthday brings together experimental and theoretical physicists who are leaders of the many fields in which he has made contributions.

Is a volume of 3.6 mL better than 1.8 mL for inferior alveolar nerve blocks in patients with symptomatic irreversible pulpitis?

Science.gov (United States)

Fowler, Sara; Reader, Al

2013-08-01

The purpose of this retrospective study was to determine the success of the inferior alveolar nerve (IAN) block using either 3.6 mL or 1.8 mL 2% lidocaine with 1:100,000 epinephrine in patients presenting with symptomatic irreversible pulpitis. As part of 7 previously published studies, 319 emergency patients presenting with symptomatic irreversible pulpitis received either a 1.8-mL volume or 3.6-mL volume of 2% lidocaine with 1:100,000 epinephrine in an IAN block. One hundred ninety patients received a 1.8-mL volume, and 129 received a 3.6-mL volume. Endodontic emergency treatment was completed on each subject. Success was defined as the ability to access and instrument the tooth without pain (visual analog scale score of 0) or mild pain (VAS rating ≤54 mm). Success of the 1.8-mL volume was 28%, and for the 3.6-mL volume it was 39%. There was no statistically significant difference between the 2 volumes. In conclusion, for patients presenting with irreversible pulpitis, success was not significantly different between a 3.6-mL volume and a 1.8-mL volume of 2% lidocaine with 1:100,000 epinephrine. The success rates (28%-39%) with either volume were not high enough to ensure complete pulpal anesthesia. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

High speed dry machining of MMCs with diamond tools

International Nuclear Information System (INIS)

Collins, J.L.

2001-01-01

The increasing use of metal matrix composites (MMCs) has raised new issues in their machining. Industrial demands for higher speed and dry machining of MMCs with improved component production to closer tolerances have driven the development of new tool materials. In particular, the wear characteristics of synthetic diamond tooling satisfy many of the requirements imposed in cutting these highly abrasive workpieces. The use of diamond tool materials, such as polycrystalline diamond (PCD), has resulted in tool life improvements which, allied with environmental considerations, show great potential for the development of dry cutting. This paper explores the wear characteristics of PCD, which is highly suited to the dry machining of particulate silicon carbide MMCs. Also, two further diamond tool materials are evaluated - chemical vapor deposition (CVD) thick layer diamond and synthetic single crystal diamond. Their suitability for the efficient machining of high volume fraction MMC materials is shown and their potential impact an the subsequent acceptance and integration of MMCs into engineering components is discussed. (author)

[Machinable property of a novel dental mica glass-ceramic].

Science.gov (United States)

Chen, Ji-hua; Li, Na; Ma, Xin-pei; Zhao, Ying-hua; Sun, Xiang; Li, Guang-xin

2007-12-01

To investigate the machinability of a novel dental mica glass-ceramic and analyze the effect of heat-treatment on its ductile machinable behavior. The drilling and turning experiment were used to measure the machinabilities of the control group (feldspar ceramic: Vita Mark II) and 7 experiment groups treated with different crystallization techniques. The microstructures were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The average drilling depths in 30 s of the experimental groups ranged from (0.5 +/- 0.1) mm to (7.1 +/- 0.8) mm. There were significant differences between the control [(0.8 +/- 0.1) mm] and the experimental groups (P machining at a high velocity and cut depth. The crystal portion of this group is only about 40%. This material has a satisfactory machinability. The mechanism could be attributed to a combination of the interlocked structure of mica crystals and the low viscosity of glassy phase.

Historical and Epistemological Reflections on the Culture of Machines around the Renaissance: How Science and Technique Work?

Directory of Open Access Journals (Sweden)

Raffaele Pisano

2014-10-01

Full Text Available This paper is divided into two parts, this being the first one. The second is entitled ‘Historical and Epistemological Reflections on the Culture of Machines around Renaissance: Machines, Machineries and Perpetual Motion’ and will be published in Acta Baltica Historiae et Philosophiae Scientiarum in 2015. Based on our recent studies, we provide here a historical and epistemological feature on the role played by machines and machineries. Ours is an epistemological thesis based on a series of historical examples to show that the relations between theoretical science and the construction of machines cannot be taken for granted, a priori. Our analysis is mainly based on the culture of machines around 15th and 17th centuries, namely the epoch of Late Renaissance and Early Modern Age. For this is the period of scientific revolution and this age offers abundant interesting material for researches into the relations of theoretical science/construction of machines as well. However, to prove our epistemological thesis, we will also exploit examples of machines built in other historical periods. Particularly, a discussion concerning the relationship between science theory and the development of science art crafts produced by non-recognized scientists in a certain historical time is presented. The main questions are: when and why did the tension between science (physics, mathematics and geometry give rise to a new scientific approach to applied discipline such as studies on machines and machineries? What kind of science was used (if at all for projecting machines and machineries? Was science at the time a necessary precondition to build a machine? In the first part we will focus on the difference between Aristotelian-Euclidean and Archimedean approaches and we will outline the heritage of these two different approaches in late medieval and Renaissance science. In the second part, we will apply our reconstructions to some historical and epistemological

A comparison of free weight squat to Smith machine squat using electromyography.

Science.gov (United States)

Schwanbeck, Shane; Chilibeck, Philip D; Binsted, Gordon

2009-12-01

The purpose of this experiment was to determine whether free weight or Smith machine squats were optimal for activating the prime movers of the legs and the stabilizers of the legs and the trunk. Six healthy participants performed 1 set of 8 repetitions (using a weight they could lift 8 times, i.e., 8RM, or 8 repetition maximum) for each of the free weight squat and Smith machine squat in a randomized order with a minimum of 3 days between sessions, while electromyographic (EMG) activity of the tibialis anterior, gastrocnemius, vastus medialis, vastus lateralis, biceps femoris, lumbar erector spinae, and rectus abdominus were simultaneously measured. Electromyographic activity was significantly higher by 34, 26, and 49 in the gastrocnemius, biceps femoris, and vastus medialis, respectively, during the free weight squat compared to the Smith machine squat (p free weight and Smith machine squat for any of the other muscles; however, the EMG averaged over all muscles during the free weight squat was 43% higher when compared to the Smith machine squat (p free weight squat may be more beneficial than the Smith machine squat for individuals who are looking to strengthen plantar flexors, knee flexors, and knee extensors.

8th International Summer Institute in Surface Science

CERN Document Server

Howe, Russell

1988-01-01

This volume contains review articles written by the invited speakers at the eighth International Summer Institute in Surface Science (ISISS 1987), held at the University of Wisconsin-Milwaukee in August of 1987. During the course of ISISS, invited speakers, all internationally recognized experts in the various fields of surface science, present tutorial review lectures. In addition, these experts are asked to write review articles on their lecture topic. Former ISISS speakers serve as advisors concerning the selection of speakers and lecture topics. Em­ phasis is given to those areas which have not been covered in depth by recent Summer Institutes, as well as to areas which have recently gained in significance and in which important progress has been made. Because of space limitations, no individual volume of Chemistry and Physics of Solid Surfaces can possibly cover the whole area of modem surface science, or even give a complete survey of recent pro­ gress in the field. However, an attempt is made to pres...

Do new anesthesia ventilators deliver small tidal volumes accurately during volume-controlled ventilation?

Science.gov (United States)

Bachiller, Patricia R; McDonough, Joseph M; Feldman, Jeffrey M

2008-05-01

During mechanical ventilation of infants and neonates, small changes in tidal volume may lead to hypo- or hyperventilation, barotrauma, or volutrauma. Partly because breathing circuit compliance and fresh gas flow affect tidal volume delivery by traditional anesthesia ventilators in volume-controlled ventilation (VCV) mode, pressure-controlled ventilation (PCV) using a circle breathing system has become a common approach to minimizing the risk of mechanical ventilation for small patients, although delivered tidal volume is not assured during PCV. A new generation of anesthesia machine ventilators addresses the problems of VCV by adjusting for fresh gas flow and for the compliance of the breathing circuit. In this study, we evaluated the accuracy of new anesthesia ventilators to deliver small tidal volumes. Four anesthesia ventilator systems were evaluated to determine the accuracy of volume delivery to the airway during VCV at tidal volume settings of 100, 200, and 500 mL under different conditions of breathing circuit compliance (fully extended and fully contracted circuits) and lung compliance. A mechanical test lung (adult and infant) was used to simulate lung compliances ranging from 0.0025 to 0.03 L/cm H(2)O. Volumes and pressures were measured using a calibrated screen pneumotachograph and custom software. We tested the Smartvent 7900, Avance, and Aisys anesthesia ventilator systems (GE Healthcare, Madison, WI) and the Apollo anesthesia ventilator (Draeger Medical, Telford, PA). The Smartvent 7900 and Avance ventilators use inspiratory flow sensors to control the volume delivered, whereas the Aisys and Apollo ventilators compensate for the compliance of the circuit. We found that the anesthesia ventilators that use compliance compensation (Aisys and Apollo) accurately delivered both large and small tidal volumes to the airway of the test lung under conditions of normal and low lung compliance during VCV (ranging from 95.5% to 106.2% of the set tidal volume

Languages, compilers and run-time environments for distributed memory machines

CERN Document Server

Saltz, J

1992-01-01

Papers presented within this volume cover a wide range of topics related to programming distributed memory machines. Distributed memory architectures, although having the potential to supply the very high levels of performance required to support future computing needs, present awkward programming problems. The major issue is to design methods which enable compilers to generate efficient distributed memory programs from relatively machine independent program specifications. This book is the compilation of papers describing a wide range of research efforts aimed at easing the task of programmin

An Improved Optimization Method for the Relevance Voxel Machine

DEFF Research Database (Denmark)

Ganz, Melanie; Sabuncu, M. R.; Van Leemput, Koen

2013-01-01

In this paper, we will re-visit the Relevance Voxel Machine (RVoxM), a recently developed sparse Bayesian framework used for predicting biological markers, e.g., presence of disease, from high-dimensional image data, e.g., brain MRI volumes. The proposed improvement, called IRVoxM, mitigates the ...

Dynamic Scheduling Of Batch Operations With Non-Identical Machines

NARCIS (Netherlands)

van der Zee, D.J.; van Harten, A.; Schuur, P.C.

1997-01-01

Batch-wise production is found in many industries. A good example of production systems which process products batch-wise are the ovens found in aircraft industry and in semiconductor manufacturing. These systems mostly consist of multiple machines of different types, given the range and volumes of

Dynamic scheduling of batch operations with non-identical machines

NARCIS (Netherlands)

van der Zee, D.J.; van Harten, Aart; Schuur, Peter

1997-01-01

Batch-wise production is found in many industries. A good example of production systems which process products batch-wise are the ovens found in aircraft industry and in semiconductor manufacturing. These systems mostly consist of multiple machines of different types, given the range and volumes of

Machine rates for selected forest harvesting machines

Science.gov (United States)

R.W. Brinker; J. Kinard; Robert Rummer; B. Lanford

2002-01-01

Very little new literature has been published on the subject of machine rates and machine cost analysis since 1989 when the Alabama Agricultural Experiment Station Circular 296, Machine Rates for Selected Forest Harvesting Machines, was originally published. Many machines discussed in the original publication have undergone substantial changes in various aspects, not...

The 8th International Conference on Highly Frustrated Magnetism (HFM 2016)

Science.gov (United States)

Gardner, J. S.; Kao, Y. J.

2017-04-01

The 8th International Conference on Highly Frustrated Magnetism 2016 (HFM 2016) took place between the 7th and 11th of September 2016 at the GIS Convention Center at National Taiwan University, Taipei, Taiwan. Over 260 participants from all over the world, attended the meeting making it the largest HFM to-date and revealing the impressive growth in the community since the original meeting in Waterloo, Canada where 80 participants attended. Preceding the meeting a school was held at the National Synchrotron Radiation Research Center to help those new to the field understand the material they were likely to see at HFM2016. Our thanks to the international speakers who attended this school John Chalker, Michel Kenzelmann, Philippe Mendels, Luigi Paolasini, Kirrily Rule, Yixi Su, Isao Watanabe and those from Taiwan W. T. Chen, Y-J, Kao, L. J. Chang and C. S. Ku, for their enlightening presentations. The HFM 2016 conference consisted of five plenary talks by H Takagi, B D Gaulin, L Balents, Y Tokura and S T Bramwell, 20 invited and 40 contributed presentations, and about 160 poster presentations from all aspects of theoretical and experimental frustrated magnetism. During the conference period, many stimulating discussions were held both inside and outside the conference room. Excursions to Taipei 101 and the National Palace Museum, as well as several organized dinners and receptions allowed the participants to initiate collaborations and discuss the hottest issues. The subjects covered in the conference included: · Quantum frustrated magnetism and spin liquids · Novel ordering of geometrically frustrated magnets · Frustration effect on the coupling to lattice, orbital and charge degrees of freedom · Exotic phenomena induced by macroscopic degeneracy · Field effect on frustrated magnetism etc. These proceeding represent a very small, but valuable contribution to the community. I hope you enjoy reading them. In view of the rapid growth of the field, it has been

7th World Congress on Nature and Biologically Inspired Computing

CERN Document Server

Engelbrecht, Andries; Abraham, Ajith; Plessis, Mathys; Snášel, Václav; Muda, Azah

2016-01-01

World Congress on Nature and Biologically Inspired Computing (NaBIC) is organized to discuss the state-of-the-art as well as to address various issues with respect to Nurturing Intelligent Computing Towards Advancement of Machine Intelligence. This Volume contains the papers presented in the Seventh World Congress (NaBIC’15) held in Pietermaritzburg, South Africa during December 01-03, 2015. The 39 papers presented in this Volume were carefully reviewed and selected. The Volume would be a valuable reference to researchers, students and practitioners in the computational intelligence field.

2005 8th Annual Systems Engineering Conference. Volume 1, Tuesday

Science.gov (United States)

2005-10-27

systems engineering – Based on ISO 12207 – software engineering – Measure using best practices of CMMI® • Benefits – Facilitates sharing of tools... 12207 Software Life-Cycle Processes IEEE SSC-C Software Engineering Process SECNAV 5000.2C DoD Architecture Framework ISO 9001:2000 Quality Systems GIG...Comparisons and Contrasts Between ISO 14001, OHSAS 18001, and MIL-STD-882D and their Suitability for the Systems Engineering Process Mr. Kenneth Dormer

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

Quantitative Proteomics of Gut-Derived Th1 and Th1/Th17 Clones Reveal the Presence of CD28+ NKG2D- Th1 Cytotoxic CD4+ T cells.

Science.gov (United States)

Riaz, Tahira; Sollid, Ludvig Magne; Olsen, Ingrid; de Souza, Gustavo Antonio

2016-03-01

T-helper cells are differentiated from CD4+ T cells and are traditionally characterized by inflammatory or immunosuppressive responses in contrast to cytotoxic CD8+ T cells. Mass-spectrometry studies on T-helper cells are rare. In this study, we aimed to identify the proteomes of human Th1 and Th1/Th17 clones derived from intestinal biopsies of Crohn's disease patients and to identify differentially expressed proteins between the two phenotypes. Crohn's disease is an inflammatory bowel disease, with predominantly Th1- and Th17-mediated response where cells of the "mixed" phenotype Th1/Th17 have also been commonly found. High-resolution mass spectrometry was used for protein identification and quantitation. In total, we identified 7401 proteins from Th1 and Th1/Th17 clones, where 334 proteins were differentially expressed. Major differences were observed in cytotoxic proteins that were overrepresented in the Th1 clones. The findings were validated by flow cytometry analyses using staining with anti-granzyme B and anti-perforin and by a degranulation assay, confirming higher cytotoxic features of Th1 compared with Th1/Th17 clones. By testing a larger panel of T-helper cell clones from seven different Crohn's disease patients, we concluded that only a subgroup of the Th1 cell clones had cytotoxic features, and these expressed the surface markers T-cell-specific surface glycoprotein CD28 and were negative for expression of natural killer group 2 member D. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

Healthier vending machines in workplaces: both possible and effective.

Science.gov (United States)

Gorton, Delvina; Carter, Julie; Cvjetan, Branko; Ni Mhurchu, Cliona

2010-03-19

To develop healthier vending guidelines and assess their effect on the nutrient content and sales of snack products sold through hospital vending machines, and on staff satisfaction. Nutrition guidelines for healthier vending machine products were developed and implemented in 14 snack vending machines at two hospital sites in Auckland, New Zealand. The guidelines comprised threshold criteria for energy, saturated fat, sugar, and sodium content of vended foods. Sales data were collected prior to introduction of the guidelines (March-May 2007), and again post-introduction (March-May 2008). A food composition database was used to assess impact of the intervention on nutrient content of purchases. A staff survey was also conducted pre- and post-intervention to assess acceptability. Pre-intervention, 16% of staff used vending machines once a week or more, with little change post-intervention (15%). The guidelines resulted in a substantial reduction in the amount of energy (-24%), total fat (-32%), saturated fat (-41%), and total sugars (-30%) per 100 g product sold. Sales volumes were not affected, and the proportion of staff satisfied with vending machine products increased. Implementation of nutrition guidelines in hospital vending machines led to substantial improvements in nutrient content of vending products sold. Wider implementation of these guidelines is recommended.

8th international workshop on large-scale integration of wind power into power systems as well as on transmission networks for offshore wind farms. Proceedings

International Nuclear Information System (INIS)

Betancourt, Uta; Ackermann, Thomas

2009-01-01

Within the 8th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Farms at 14th to 15th October, 2009 in Bremen (Federal Republic of Germany), lectures and posters were presented to the following sessions: (1) Keynote session and panel; (2) Grid integration studies and experience: Europe; (3) Connection of offshore wind farms; (4) Wind forecast; (5) High voltage direct current (HVDC); (6) German grid code issues; (7) Offshore grid connection; (8) Grid integration studies and experience: North America; (9) SUPWIND - Decision support tools for large scale integration of wind; (10) Windgrid - Wind on the grid: An integrated approach; (11) IEA Task 25; (12) Grid code issues; (13) Market Issues; (14) Offshore Grid; (15) Modelling; (16) Wind power and storage; (17) Power system balancing; (18) Wind turbine performance; (19) Modelling and offshore transformer.

SLSF loop handling system. Volume I. Structural analysis

International Nuclear Information System (INIS)

Ahmed, H.; Cowie, A.; Ma, D.

1978-10-01

SLSF loop handling system was analyzed for deadweight and postulated dynamic loading conditions, identified in Chapters II and III in Volume I of this report, using a linear elastic static equivalent method of stress analysis. Stress analysis of the loop handling machine is presented in Volume I of this report. Chapter VII in Volume I of this report is a contribution by EG and G Co., who performed the work under ANL supervision

The ideal oxygen/nitrous oxide fresh gas flow sequence with the Anesthesia Delivery Unit machine.

Science.gov (United States)

Hendrickx, Jan F A; Cardinael, Sara; Carette, Rik; Lemmens, Hendrikus J M; De Wolf, Andre M

2007-06-01

To determine whether early reduction of oxygen and nitrous oxide fresh gas flow from 6 L/min to 0.7 L/min could be accomplished while maintaining end-expired nitrous oxide concentration > or =50% with an Anesthesia Delivery Unit anesthesia machine. Prospective, randomized clinical study. Large teaching hospital in Belgium. 53 ASA physical status I and II patients requiring general endotracheal anesthesia and controlled mechanical ventilation. Patients were randomly assigned to one of 4 groups depending on the duration of high oxygen/nitrous oxide fresh gas flow (two and 4 L/min, respectively) before lowering total fresh gas flow to 0.7 L/min (0.3 and 0.4 L/min oxygen and nitrous oxide, respectively): one, two, three, or 5 minutes (1-minute group, 2-minute group, 3-minute group, and 5-minute group), with n = 10, 12, 13, and 8, respectively. The course of the end-expired nitrous oxide concentration and bellows volume deficit at end-expiration was compared among the 4 groups during the first 30 minutes. At the end of the high-flow period the end-expired nitrous oxide concentration was 35.6 +/- 6.2%, 48.4 +/- 4.8%, 53.7 +/- 8.7%, and 57.3 +/- 1.6% in the 4 groups, respectively. Thereafter, the end-expired nitrous oxide concentration decreased to a nadir of 36.1 +/- 4.5%, 45.4 +/- 3.8%, 50.9 +/- 6.1%, and 55.4 +/- 2.8% after three, 4, 6, and 8 minutes after flows were lowered in the 1- to 5-minute groups, respectively. A decrease in bellows volume was observed in most patients, but was most pronounced in the 2-minute group. The bellows volume deficit gradually faded within 15 to 20 minutes in all 4 groups. A 3-minute high-flow period (oxygen and nitrous oxide fresh gas flow of 2 and 4 L/min, respectively) suffices to attain and maintain end-expired nitrous oxide concentration > or =50% and ensures an adequate bellows volume during the ensuing low-flow period.

Energy transport in mirror machine LISA at electron cyclotron resonance

International Nuclear Information System (INIS)

Cunha Rapozo, C. da; Serbeto, A.; Torres-Silva, H.

1993-01-01

It is shown that a classical transport calculation is adequate to predict the steady state temperature of the RF produced plasma in LISA machine for both large and small resonant volumes. Temperature anisotropy ranging from 55 to 305 was found which was larger for small resonant volume, and the temperature relaxation was larger at large resonant one. This agrees with the fact that there is a Coulomb relaxation ν c which is proportional to T e -3/2 . It is also shown that the fitting parameter alpha is larger for large resonant volume than for small resonant one. (L.C.J.A.)

16th International Symposium of Robotic Research

CERN Document Server

Corke, Peter

2016-01-01

This volume presents a collection of papers presented at the 16th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 16th edition took place in Singapore over the period 16th to 19th December 2013. The ISRR is the longest running series of robotics research meetings and dates back to the very earliest days of robotics as a research discipline. This 16th ISRR meeting was held in the 30th anniversary year of the very first meeting which took place in Bretton Woods (New Hampshire, USA) in August 1983., and represents thirty years at the forefront of ideas in robotics research. As for the previous symposia, ISRR 2013 followed up on the successful concept of a mixture of invited contributions and open submissions. 16 of the contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other contributions were chosen among the open submissions afte...

Diagnosing Coronary Heart Disease using Ensemble Machine Learning

OpenAIRE

Kathleen H. Miao; Julia H. Miao; George J. Miao

2016-01-01

Globally, heart disease is the leading cause of death for both men and women. One in every four people is afflicted with and dies of heart disease. Early and accurate diagnoses of heart disease thus are crucial in improving the chances of long-term survival for patients and saving millions of lives. In this research, an advanced ensemble machine learning technology, utilizing an adaptive Boosting algorithm, is developed for accurate coronary heart disease diagnosis and outcome predictions. Th...

79th Annual Meeting of the Psychometric Society

CERN Document Server

Bolt, Daniel; Wang, Wen-Chung; Douglas, Jeffrey; Chow, Sy-Miin

2015-01-01

These research articles from the 79th Annual Meeting of the Psychometric Society (IMPS) cover timely quantitative psychology topics, including new methods in item response theory, computerized adaptive testing, cognitive diagnostic modeling, and psychological scaling. Topics within general quantitative methodology include structural equation modeling, factor analysis, causal modeling, mediation, missing data methods, and longitudinal data analysis. These methods will appeal, in particular, to researchers in the social sciences. The 79th annual meeting took place in Madison, WI between July 21nd and 25th, 2014. Previous volumes to showcase work from the Psychometric Society’s Meeting are New Developments in Quantitative Psychology: Presentations from the 77th Annual Psychometric Society Meeting (Springer, 2013) and Quantitative Psychology Research: The 78th Annual Meeting of the Psychometric Society  (Springer, 2015).

6th International Conference on Innovations in Bio-Inspired Computing and Applications

CERN Document Server

Abraham, Ajith; Krömer, Pavel; Pant, Millie; Muda, Azah

2016-01-01

This Volume contains the papers presented during the 6th International Conference on Innovations in Bio-Inspired Computing and Applications IBICA 2015 which was held in Kochi, India during December 16-18, 2015. The 51 papers presented in this Volume were carefully reviewed and selected. The 6th International Conference IBICA 2015 has been organized to discuss the state-of-the-art as well as to address various issues in the growing research field of Bio-inspired Computing which is currently one of the most exciting research areas, and is continuously demonstrating exceptional strength in solving complex real life problems. The Volume will be a valuable reference to researchers, students and practitioners in the computational intelligence field.

The 16th International Geological Congress, Washington, 1933

Science.gov (United States)

Nelson, C.M.

2009-01-01

In 1933, the International Geological Congress (IGC) returned to the United States of America (USA) for its sixteenth meeting, forty-two years after the 5th IGC convened in Washington. The Geological Society of America and the U.S. Geological Survey (USGS) supplied the major part of the required extra-registration funding after the effects of the Great Depression influenced the 72th U.S. Congress not to do so. A reported 1, 182 persons or organizations, representing fifty-four countries, registered for the 16 th IGC and thirty-four countries sent 141 official delegates. Of the total number of registrants, 665 actually attended the meeting; 500 came from the USA; and fifteen had participated in the 5th IGC. The 16 th Meeting convened in the U.S. Chamber of Commerce Building from 22 to 29 July. The eighteen half-day scientific sections-orogenesis (four), major divisions of the Paleozoic (three), miscellaneous (three), batholiths and related intrusives (two), arid-region geomorphic processes and products (one), fossil man and contemporary faunas (one), geology of copper and other ore deposits (one), geology of petroleum (one), measuring geologic time (one), and zonal relations of metalliferous deposits (one)-included 166 papers, of which fifty (including several of the key contributions) appeared only by title. The Geological Society of Washington, the National Academy of Sciences, and the U.S. Bureau of Mines hosted or contributed to evening presentations or receptions. Twenty-eight of the 16th IGC's thirty new guidebooks and one new USGS Bulletin aided eight pre-meeting, seven during-meeting, and four post-meeting field trips of local, regional, or national scope. The remaining two new guidebooks outlined the USA's structural geology and its stratigraphic nomenclature. The 16th IGC published a two-volume monograph on the world's copper resources (1935) and a two-volume report of its proceedings (1936).

The Prognostic Value of the 8th Edition of the American Joint Committee on Cancer (AJCC) Staging System in HER2-Enriched Subtype Breast Cancer, a Retrospective Analysis.

Science.gov (United States)

Zhou, Bin; Xu, Ling; Ye, Jingming; Xin, Ling; Duan, Xuening; Liu, Yinhua

2017-08-01

The American Joint Committee on Cancer (AJCC) released its 8th edition of tumor staging which is to be implemented in early 2018. The present study aimed to analyze the prognostic value of AJCC 8th edition Cancer Staging System in HER2-enriched breast cancer, on a retrospective cohort. This study was a retrospective single-center study of HER2-enriched breast cancer cases diagnosed from January 2008 to December 2014. Clinicopathological features and follow up data including disease-free survival (DFS) and overall survival (OS) were analyzed to explore prognostic factors for disease outcome. We restaged patients based on the 8th edition of the AJCC cancer staging system and analyzed prognostic value of the Anatomic Stage Group and the Prognostic Stage Group. The study enrolled 170 HER2-enriched subtype breast cancer patients with 5-year disease free survival (DFS) of 85.1% and 5-year overall survival (OS) of 86.8%. Prognostic stages of 117 cases (68.8%) changed compared with anatomic stages, with 116 upstaged cases and 1 downstaged case. The Anatomic Stage Groups had a significant prognostic impact on DFS (χ 2 =16.752, panalysis, both stage groups were independent predictors of OS. Both Anatomic and Prognostic Stage Groups in the 8th edition of the AJCC breast cancer staging system had prognostic value in HER2-enriched subtype breast cancer. The Prognostic Stage system was a breakthrough on the basis of anatomic staging system. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Time series analysis of brain regional volume by MR image

International Nuclear Information System (INIS)

Tanaka, Mika; Tarusawa, Ayaka; Nihei, Mitsuyo; Fukami, Tadanori; Yuasa, Tetsuya; Wu, Jin; Ishiwata, Kiichi; Ishii, Kenji

2010-01-01

The present study proposed a methodology of time series analysis of volumes of frontal, parietal, temporal and occipital lobes and cerebellum because such volumetric reports along the process of individual's aging have been scarcely presented. Subjects analyzed were brain images of 2 healthy males and 18 females of av. age of 69.0 y, of which T1-weighted 3D SPGR (spoiled gradient recalled in the steady state) acquisitions with a GE SIGNA EXCITE HD 1.5T machine were conducted for 4 times in the time series of 42-50 months. The image size was 256 x 256 x (86-124) voxels with digitization level 16 bits. As the template for the regions, the standard gray matter atlas (icbn452 a tlas p robability g ray) and its labeled one (icbn.Labels), provided by UCLA Laboratory of Neuro Imaging, were used for individual's standardization. Segmentation, normalization and coregistration were performed with the MR imaging software SPM8 (Statistic Parametric Mapping 8). Volumes of regions were calculated as their voxel ratio to the whole brain voxel in percent. It was found that the regional volumes decreased with aging in all above lobes examined and cerebellum in average percent per year of -0.11, -0.07, -0.04, -0.02, and -0.03, respectively. The procedure for calculation of the regional volumes, which has been manually operated hitherto, can be automatically conducted for the individual brain using the standard atlases above. (T.T.)

Nano Mechanical Machining Using AFM Probe

Science.gov (United States)

Mostofa, Md. Golam

Complex miniaturized components with high form accuracy will play key roles in the future development of many products, as they provide portability, disposability, lower material consumption in production, low power consumption during operation, lower sample requirements for testing, and higher heat transfer due to their very high surface-to-volume ratio. Given the high market demand for such micro and nano featured components, different manufacturing methods have been developed for their fabrication. Some of the common technologies in micro/nano fabrication are photolithography, electron beam lithography, X-ray lithography and other semiconductor processing techniques. Although these methods are capable of fabricating micro/nano structures with a resolution of less than a few nanometers, some of the shortcomings associated with these methods, such as high production costs for customized products, limited material choices, necessitate the development of other fabricating techniques. Micro/nano mechanical machining, such an atomic force microscope (AFM) probe based nano fabrication, has, therefore, been used to overcome some the major restrictions of the traditional processes. This technique removes material from the workpiece by engaging micro/nano size cutting tool (i.e. AFM probe) and is applicable on a wider range of materials compared to the photolithographic process. In spite of the unique benefits of nano mechanical machining, there are also some challenges with this technique, since the scale is reduced, such as size effects, burr formations, chip adhesions, fragility of tools and tool wear. Moreover, AFM based machining does not have any rotational movement, which makes fabrication of 3D features more difficult. Thus, vibration-assisted machining is introduced into AFM probe based nano mechanical machining to overcome the limitations associated with the conventional AFM probe based scratching method. Vibration-assisted machining reduced the cutting forces

Normal reference values for vertebral artery flow volume by color Doppler sonography in Korean adults

Energy Technology Data Exchange (ETDEWEB)

Hong, Hyun Sook; Cha, Jang Gyu; Park, Seong Jin; Joh, Joon Hee; Park, Jai Soung; Kim, Dae Ho; Lee, Hae Kyung; Ahn, Hyun Cheol [Soonchunhyang University Bucheon Hospital, Bucheon (Korea, Republic of)

2003-09-15

Vertebrobasilar ischemia has been attributed to a reduction of net vertebral artery flow volume. This study was to establish the reference values for the flow volume of the vertebral artery using color Doppler sonography in the normal Korea adults. Thirty five normal Korea adults without any underlying disease including hypertension, hyperlipidemia, diabetes, heart disease, obesity (body mas index>30), or carotid artery stenosis was included. There were 17 males and 18 females, age ranged from 20 to 53 years (average=32.86 years). Flow velocities and vessel diameters were recorded in the intertransverse (V2) segment, usually at C5-6 level, bilaterally. The flow volume (Q) was calculated. (Q=time averaged mean velocity x cross sectional area of vessel) A lower Flow velocity and smaller vessel diameter were measured on the right side compared to those of the left side, resulting in a lower flow volume. The calculated flow volumes using the equation were 77.0 +- 39.7 ml/min for the right side and 127.6 +- 71.0 ml/min for the left side (p=0.0001) while the net vertebral artery flow volume was 204.6 +- 81.8 ml/min. Decrease in the vertebral artery flow volume was statistically significant with advanced age. (r=-0.36, p=0.032). Vertebral artery blood flow volume was 191.20 +- 59.19 ml/min in male, and 217.28 +- 98.67 ml/min in female (p=0.6). The normal range for the net vertebral artery flow volume defined by the 5th to 95th percentiles was between 110.06 and 364.1 ml/min. The normal range for the net vertebral artery flow volume was between 110.06 and 364.1 ml/min. Vertebral artery flow volume decreased with the increase of age. However, gender did not affect the blood flow volume.

Normal reference values for vertebral artery flow volume by color Doppler sonography in Korean adults

International Nuclear Information System (INIS)

Hong, Hyun Sook; Cha, Jang Gyu; Park, Seong Jin; Joh, Joon Hee; Park, Jai Soung; Kim, Dae Ho; Lee, Hae Kyung; Ahn, Hyun Cheol

2003-01-01

Vertebrobasilar ischemia has been attributed to a reduction of net vertebral artery flow volume. This study was to establish the reference values for the flow volume of the vertebral artery using color Doppler sonography in the normal Korea adults. Thirty five normal Korea adults without any underlying disease including hypertension, hyperlipidemia, diabetes, heart disease, obesity (body mas index>30), or carotid artery stenosis was included. There were 17 males and 18 females, age ranged from 20 to 53 years (average=32.86 years). Flow velocities and vessel diameters were recorded in the intertransverse (V2) segment, usually at C5-6 level, bilaterally. The flow volume (Q) was calculated. (Q=time averaged mean velocity x cross sectional area of vessel) A lower Flow velocity and smaller vessel diameter were measured on the right side compared to those of the left side, resulting in a lower flow volume. The calculated flow volumes using the equation were 77.0 ± 39.7 ml/min for the right side and 127.6 ± 71.0 ml/min for the left side (p=0.0001) while the net vertebral artery flow volume was 204.6 ± 81.8 ml/min. Decrease in the vertebral artery flow volume was statistically significant with advanced age. (r=-0.36, p=0.032). Vertebral artery blood flow volume was 191.20 ± 59.19 ml/min in male, and 217.28 ± 98.67 ml/min in female (p=0.6). The normal range for the net vertebral artery flow volume defined by the 5th to 95th percentiles was between 110.06 and 364.1 ml/min. The normal range for the net vertebral artery flow volume was between 110.06 and 364.1 ml/min. Vertebral artery flow volume decreased with the increase of age. However, gender did not affect the blood flow volume.

MPCV Exercise Operational Volume Analysis

Science.gov (United States)

Godfrey, A.; Humphreys, B.; Funk, J.; Perusek, G.; Lewandowski, B. E.

2017-01-01

In order to minimize the loss of bone and muscle mass during spaceflight, the Multi-purpose Crew Vehicle (MPCV) will include an exercise device and enough free space within the cabin for astronauts to use the device effectively. The NASA Digital Astronaut Project (DAP) has been tasked with using computational modeling to aid in determining whether or not the available operational volume is sufficient for in-flight exercise.Motion capture data was acquired using a 12-camera Smart DX system (BTS Bioengineering, Brooklyn, NY), while exercisers performed 9 resistive exercises without volume restrictions in a 1g environment. Data were collected from two male subjects, one being in the 99th percentile of height and the other in the 50th percentile of height, using between 25 and 60 motion capture markers. Motion capture data was also recorded as a third subject, also near the 50th percentile in height, performed aerobic rowing during a parabolic flight. A motion capture system and algorithms developed previously and presented at last years HRP-IWS were utilized to collect and process the data from the parabolic flight [1]. These motions were applied to a scaled version of a biomechanical model within the biomechanical modeling software OpenSim [2], and the volume sweeps of the motions were visually assessed against an imported CAD model of the operational volume. Further numerical analysis was performed using Matlab (Mathworks, Natick, MA) and the OpenSim API. This analysis determined the location of every marker in space over the duration of the exercise motion, and the distance of each marker to the nearest surface of the volume. Containment of the exercise motions within the operational volume was determined on a per-exercise and per-subject basis. The orientation of the exerciser and the angle of the footplate were two important factors upon which containment was dependent. Regions where the exercise motion exceeds the bounds of the operational volume have been

Measurement of the CNA I's (Atucha I nuclear power plant) control rods reactivity during its commissioning on January 8th, 1990

International Nuclear Information System (INIS)

Waldman, R.M.; Gomez, A.

1990-01-01

Measurements were made on integral and differential calibration of rod 16, fuel racks RG and R3 and extinction reactivity during Atucha I nuclear power plant's commissioning on January 8th., 1990. These were the first physical measurements performed after the first critical nuclear power plant's commissioning. (Author) [es

Achieving precision in high density batch mode micro-electro-discharge machining

International Nuclear Information System (INIS)

Richardson, Mark T; Gianchandani, Yogesh B

2008-01-01

This paper reports a parametric study of batch mode micro-electro-discharge machining (µEDM) of high density features in stainless steel. Lithographically fabricated copper tools with single cross, parallel line and 8 × 8 circle/square array features of 5–100 µm width and 5–75 µm spacing were used to quantify trends in machining tolerance and the impact of debris accumulation. As the tool feature density is increased, debris accumulation effects begin to dominate, eventually degrading both tool and workpiece. Two independent techniques for mitigating this debris buildup are separately investigated. The first is a passivation coating which suppresses spurious discharges triggered from the sidewalls of the machining tool. By this method, the mean tool wear rate decreases from a typical of about 34% to 1.7% and machining non-uniformity reduces from 4.9 µm to 1.1 µm across the workpiece. The second technique involves a two-step machining process that enhances the hydrodynamic removal of machining debris compared to standard methods. This improves surface and edge finish, machining time and tool wear

3D Visualization Types in Multimedia Applications for Science Learning: A Case Study for 8th Grade Students in Greece

Science.gov (United States)

Korakakis, G.; Pavlatou, E. A.; Palyvos, J. A.; Spyrellis, N.

2009-01-01

This research aims to determine whether the use of specific types of visualization (3D illustration, 3D animation, and interactive 3D animation) combined with narration and text, contributes to the learning process of 13- and 14- years-old students in science courses. The study was carried out with 212 8th grade students in Greece. This…

Effect of 8 weeks of free-weight and machine-based strength training on strength and power performance.

Science.gov (United States)

Wirth, Klaus; Keiner, Michael; Hartmann, Hagen; Sander, Andre; Mickel, Christoph

2016-12-01

The aim of this study was to evaluate the effectiveness of free-weight and machine-based exercises to increase different strength and speed-strength variables. One hundred twenty male participants (age: 23.8 ± 2.5 years; body height: 181.0 ± 6.8 cm; body mass: 80.2 ± 8.9 kg) joined the study. The 2 experimental groups completed an 8 week periodized strength training program that included 2 training sessions per week. The exercises that were used in the strength training programs were the parallel barbell squat and the leg press. Before and after the training period, the 1-repetition-maximum in the barbell squat and the leg press, the squat jump, the countermovement jump and unilateral isometric force (maximal isometric force and the rate of force development) were evaluated. To compare each group pre vs. post-intervention, analysis of variance with repeated measures and Scheffé post-hoc tests were used. The leg press group increased their 1-repetition-maximum significantly (p squat group such variables as 1-repetition-maximum, the squat jump and the countermovement jump increased significantly (p squat group even showed a statistically significant decrease. Differences between the 2 experimental groups were detected for the squat jump and the countermovement jump. In comparison with the leg press, the squat might be a better strength training exercise for the development of jump performance.

Relationship between udder morphology traits, alveolar and cisternal milk compartments and machine milking performances of dairy camels (Camelus dromedarius

Directory of Open Access Journals (Sweden)

M. Ayadi

2013-07-01

Full Text Available A total of 22 dairy dromedary camels under intensive conditions in late lactation (275±24 days were used to study the relationship between external and internal udder morphology and machine milking performances. Measurements of udder and teat morphology were obtained immediately before milking and in duplicate. Individual milk yield, lag time and total milking time were recorded during milking, and milk samples were collected and analyzed for milk composition thereafter. Cisternal and alveolar milk volumes and composition were evaluated at 9 h milking interval. Results revealed that dairy camels had well developed udders and milk veins, with medium sized teats. On average, milk yield as well as milk fat and protein contents were 4.80±0.50 L d-1, 2.61±0.16% and 3.08±0.05%, respectively. The low fat values observed indicated incomplete milk letdown during machine milking. Lag time, and total milking time were 3.0±0.3, and 120.0±8.9s, on average, respectively. Positive correlations (p<0.05 were observed between milk yield and udder depth (r=0.37, distance between teats (r=0.57 and milk vein diameter (r=0.28, while a negative correlation was found with udder height (r=-0.25, p<0.05. Cisternal milk accounted for 11% of the total udder milk. Positive correlations were observed between total milk yield and volume of alveolar milk (r=0.98; p<0.001 as well as with volume of cisternal milk (r=0.63, p<0.05. Despite the low udder milk storage capacity observed in dairy camels, our study concluded that the evaluated dromedary sample had adequate udder morphology for machine milking. Finally, positive relationships were detected between milk yield and udder morphology traits of dairy camels.

Machine learning in medicine cookbook

CERN Document Server

Cleophas, Ton J

2014-01-01

The amount of data in medical databases doubles every 20 months, and physicians are at a loss to analyze them. Also, traditional methods of data analysis have difficulty to identify outliers and patterns in big data and data with multiple exposure / outcome variables and analysis-rules for surveys and questionnaires, currently common methods of data collection, are, essentially, missing. Obviously, it is time that medical and health professionals mastered their reluctance to use machine learning and the current 100 page cookbook should be helpful to that aim. It covers in a condensed form the subjects reviewed in the 750 page three volume textbook by the same authors, entitled “Machine Learning in Medicine I-III” (ed. by Springer, Heidelberg, Germany, 2013) and was written as a hand-hold presentation and must-read publication. It was written not only to investigators and students in the fields, but also to jaded clinicians new to the methods and lacking time to read the entire textbooks. General purposes ...

EDITORIAL: Selected articles from `The 8th Edoardo Amaldi Conference on Gravitational Waves (Amaldi 8)', Columbia University, New York, 22-26 June 2009 Selected articles from `The 8th Edoardo Amaldi Conference on Gravitational Waves (Amaldi 8)', Columbia University, New York, 22-26 June 2009

Science.gov (United States)

Marka, Zsuzsa; Marka, Szabolcs

2010-04-01

At Amaldi7,which was held in Sydney in 2007, the Gravitational Wave International Committee (GWIC), which oversees the Amaldi meetings, decided to hold the 8th Edoardo Amaldi Conference on Gravitational Waves at Columbia University in the City of New York. With this decision, Amaldi returned to North America after a decade. The previous two years have seen many advances in the field of gravitational-wave detection. By the summer of 2009 the km-scale ground based interferometric detectors in the USA and Europe were preparing for a second long-term scientific run as a worldwide detector network. The advanced or second-generation detectors had well-developed plans and were ready for the production phase or had started construction. The European-American space mission, LISA Pathfinder, is progressing towards deployment in the foreseeable future and it is expected to pave the way towards gravitational-wave detection in the millihertz regime with LISA. Plans were developed for an additional gravitational-wave detector in Australia and in Japan (in this case underground) to extend the worldwide network of detectors for the advanced detector era. Japanese colleagues also presented plans for a space mission, DECIGO, that would bridge the gap between the LISA and ground-based interferometer frequency range. Compared to previous Amaldi meetings, Amaldi8 had new elements representing emerging trends in the field. For example, with the inclusion of pulsar timing collaborations to the GWIC, gravitational-wave detection using pulsar timing arrays was recognized as one of the prominent directions in the field and was represented at Amaldi8 as a separate session. By 2009, searches for gravitational waves based on external triggers received from electromagnetic observations were already producing significant scientific results and plans existed for pointing telescopes by utilizing gravitational-wave trigger events. Such multimessenger approaches to gravitational-wave detection also

Potential pathogenetic role of Th17, Th0, and Th2 cells in erosive and reticular oral lichen planus.

Science.gov (United States)

Piccinni, M-P; Lombardelli, L; Logiodice, F; Tesi, D; Kullolli, O; Biagiotti, R; Giudizi, Mg; Romagnani, S; Maggi, E; Ficarra, G

2014-03-01

The role of Th17 cells and associated cytokines was investigated in oral lichen planus. 14 consecutive patients with oral lichen planus were investigated. For biological studies, tissues were taken from reticular or erosive lesions and from normal oral mucosa (controls) of the same patient. mRNA expression for IL-17F, IL-17A, MCP-1, IL-13, IL-2, IL-10, IL-1β, RANTES, IL-4, IL-12B, IL-8, IFN-γ, TNF-α, IL-1α, IL-18, TGF-β1, IL-23R, IL-7, IL-15, IL-6, MIG, IP-10, LTB, VEGF, IL-5, IL-27, IL-23A, GAPDH, PPIB, Foxp3, GATA3, and RORC was measured using the QuantiGene 2.0. Results showed that Th17-type and Th0-type molecules' mRNAs, when compared with results obtained from tissue controls, were increased in biopsies of erosive lesions, whereas Th2-type molecules' mRNAs were increased in reticular lesions. When the CD4+ T-cell clones, derived from oral lichen planus tissues and tissue controls, were analyzed, a higher prevalence of Th17 (confirmed by an increased CD161 expression) and Th0 CD4+ T clones was found in erosive lesions, whereas a prevalence of Th2 clones was observed in reticular lesions. Our data suggest that Th17, Th0, and Th2 cells, respectively, may have a role in the pathogenesis of erosive and reticular oral lichen planus. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Metal release from coffee machines and electric kettles.

Science.gov (United States)

Müller, Frederic D; Hackethal, Christin; Schmidt, Roman; Kappenstein, Oliver; Pfaff, Karla; Luch, Andreas

2015-01-01

The release of elemental ions from 8 coffee machines and 11 electric kettles into food simulants was investigated. Three different types of coffee machines were tested: portafilter espresso machines, pod machines and capsule machines. All machines were tested subsequently on 3 days before and on 3 days after decalcification. Decalcification of the machines was performed with agents according to procedures as specified in the respective manufacturer's manuals. The electric kettles showed only a low release of the elements analysed. For the coffee machines decreasing concentrations of elements were found from the first to the last sample taken in the course of 1 day. Metal release on consecutive days showed a decreasing trend as well. After decalcification a large increase in the amounts of elements released was encountered. In addition, the different machine types investigated clearly differed in their extent of element release. By far the highest leaching, both quantitatively and qualitatively, was found for the portafilter machines. With these products releases of Pb, Ni, Mn, Cr and Zn were in the range and beyond the release limits as proposed by the Council of Europe. Therefore, a careful rinsing routine, especially after decalcification, is recommended for these machines. The comparably lower extent of release of one particular portafilter machine demonstrates that metal release at levels above the threshold that triggers health concerns are technically avoidable.

Comparison of 16-frame and 8-frame gated SPET imaging for determination of left ventricular volumes and ejection fraction

International Nuclear Information System (INIS)

Navare, Sachin M.; Liu, Yi-Hwa; Wackers, Frans J.T.

2003-01-01

Electrocardiographic (ECG) gated single-photon emission tomography (SPET) allows for simultaneous assessment of myocardial perfusion and left ventricular (LV) function. Presently 8-frame per cardiac cycle ECG gating of SPET images is standard. The aim of this study was to compare the effect of 8-frame and 16-frame gated SPET on measurements of LV volumes and to evaluate the effects of the presence of myocardial perfusion defects and of radiotracer dose administered on the calculation of LV volumes. A total of 86 patients underwent technetium-99m SPET myocardial perfusion imaging using 16-frame per cardiac cycle acquisition. Eight-frame gated SPET images were generated by summation of contiguous frames. Left ventricular end-diastolic volume (EDV), end-systolic volume (ESV) and ejection fraction (EF) were calculated from the 16-frame and 8-frame data sets. The patients were divided into groups according to the administered dose of the radiotracer and the size of the perfusion defect. Results. Sixteen frame per cardiac cycle acquisition resulted in significantly larger EDV (122±72 ml vs 115±68 ml, P<0.0001), smaller ESV (64±58.6 ml vs 67.6±59.5 ml, P<0.0001), and higher LVEF (55.3%±18% vs 49%±17.4%, P<0.0001) as compared to 8-frame SPET imaging. This effect was seen regardless of whether a high or a low dose was administered and whether or not significant perfusion defects were present. This study shows that EDV, ESV and LVEF determined by 16-frame gated SPET are significantly different from those determined by 8-frame gated SPET. The radiotracer dose and perfusion defects do not affect estimation of LV parameters by 16-frame gated SPET. (orig.)

12th International Symposium Continuous Surface Mining

CERN Document Server

2015-01-01

This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

LEAR: a machine ahead of its time

CERN Multimedia

Katarina Anthony

2012-01-01

Described as a “machine physicist's concert platform”, the Low Energy Antiproton Ring (LEAR) was everything at once: an accelerator, a storage ring, a decelerator, a cooler ring and a beam stretcher. 2012 marks the 30th anniversary of its start-up and an opportunity for the Bulletin to take a look back at the history of this remarkable machine.   This article is a tribute to Dieter Möhl, one of LEAR's founding fathers, who passed away at the end May.   Kilian's graph shows the phase space density of antiprotons produced from 26 GeV protons vs. antiproton momentum. Note that this density is significantly higher at low momentum for a decelerated beam. (Graph published in the 1977 "Low Energy Antiproton Factory" paper.) Like most great CERN projects, LEAR began with a dream and a coffee between colleagues. The year was 1976, the coffee was shared by Kurt Kilian and Diete...

Determination of thorium 230Th in soils

International Nuclear Information System (INIS)

Alvarez, A.; Palomares, J.

1988-01-01

A method for the determination of 230 Th in environmental soils is described. Hydroxides formed, previous fusion with sodium peroxide are dissolved with HNO 3 8N. The thorium is coprecipitated with F 3 La and purified by anion exchange (AG 1x8 50-100 mesh). Thorium is electroplated onto a stainless steel disc, 230 Th is counted by alpha spectrometry and 234 Th used as a tracer by beta counting. The chemical yield for 1g of soil sample is 60-80%. Minimum detectable activities are about 2 mBq/g. (Author)

Aliens and time in the machine age

Science.gov (United States)

Brake, Mark; Hook, Neil

2006-12-01

The 19th century saw sweeping changes for the development of astrobiology, both in the constituency of empirical science encroaching upon all aspects of life and in the evolution of ideas, with Lyell's Principles of Geology radically raising expectation of the true age of the Earth and the drama of Darwinism questioning biblically literalist accounts of natural history. This paper considers the popular culture spun on the crackling loom of the emergent aspects of astrobiology of the day: Edward Bulwer-Lytton's The Coming Race (1871), which foretold the race of the future, and satirist Samuel Butler's anticipation of machine intelligence, `Darwin Among the Machines', in his Erewhon (1872). Finally, we look at the way Darwin, Huxley and natural selection travelled into space with French astronomer Camille Flammarion's immensely popular Récits de l'infini (Stories of Infinity, 1872), and the social Darwinism of H.G. Wells' The Time Machine (1895) and The War of the Worlds (1898). These works of popular culture presented an effective and inspiring communication of science; their crucial discourse was the reducible gap between the new worlds uncovered by science and exploration and the fantastic strange worlds of the imagination. As such they exemplify a way in which the culture and science of popular astrobiology can be fused.

Numerical Simulations of Two-Phase Flow in a Self-Aerated Flotation Machine and Kinetics Modeling

KAUST Repository

Fayed, Hassan E.; Ragab, Saad

2015-01-01

A new boundary condition treatment has been devised for two-phase flow numerical simulations in a self-aerated minerals flotation machine and applied to a Wemco 0.8 m3 pilot cell. Airflow rate is not specified a priori but is predicted by the simulations as well as power consumption. Time-dependent simulations of two-phase flow in flotation machines are essential to understanding flow behavior and physics in self-aerated machines such as the Wemco machines. In this paper, simulations have been conducted for three different uniform bubble sizes (db = 0.5, 0.7 and 1.0 mm) to study the effects of bubble size on air holdup and hydrodynamics in Wemco pilot cells. Moreover, a computational fluid dynamics (CFD)-based flotation model has been developed to predict the pulp recovery rate of minerals from a flotation cell for different bubble sizes, different particle sizes and particle size distribution. The model uses a first-order rate equation, where models for probabilities of collision, adhesion and stabilization and collisions frequency estimated by Zaitchik-2010 model are used for the calculation of rate constant. Spatial distributions of dissipation rate and air volume fraction (also called void fraction) determined by the two-phase simulations are the input for the flotation kinetics model. The average pulp recovery rate has been calculated locally for different uniform bubble and particle diameters. The CFD-based flotation kinetics model is also used to predict pulp recovery rate in the presence of particle size distribution. Particle number density pdf and the data generated for single particle size are used to compute the recovery rate for a specific mean particle diameter. Our computational model gives a figure of merit for the recovery rate of a flotation machine, and as such can be used to assess incremental design improvements as well as design of new machines.

Numerical Simulations of Two-Phase Flow in a Self-Aerated Flotation Machine and Kinetics Modeling

Directory of Open Access Journals (Sweden)

Hassan Fayed

2015-03-01

Full Text Available A new boundary condition treatment has been devised for two-phase flow numerical simulations in a self-aerated minerals flotation machine and applied to a Wemco 0.8 m3 pilot cell. Airflow rate is not specified a priori but is predicted by the simulations as well as power consumption. Time-dependent simulations of two-phase flow in flotation machines are essential to understanding flow behavior and physics in self-aerated machines such as the Wemco machines. In this paper, simulations have been conducted for three different uniform bubble sizes (db = 0.5, 0.7 and 1.0 mm to study the effects of bubble size on air holdup and hydrodynamics in Wemco pilot cells. Moreover, a computational fluid dynamics (CFD-based flotation model has been developed to predict the pulp recovery rate of minerals from a flotation cell for different bubble sizes, different particle sizes and particle size distribution. The model uses a first-order rate equation, where models for probabilities of collision, adhesion and stabilization and collisions frequency estimated by Zaitchik-2010 model are used for the calculation of rate constant. Spatial distributions of dissipation rate and air volume fraction (also called void fraction determined by the two-phase simulations are the input for the flotation kinetics model. The average pulp recovery rate has been calculated locally for different uniform bubble and particle diameters. The CFD-based flotation kinetics model is also used to predict pulp recovery rate in the presence of particle size distribution. Particle number density pdf and the data generated for single particle size are used to compute the recovery rate for a specific mean particle diameter. Our computational model gives a figure of merit for the recovery rate of a flotation machine, and as such can be used to assess incremental design improvements as well as design of new machines.

Numerical Simulations of Two-Phase Flow in a Self-Aerated Flotation Machine and Kinetics Modeling

KAUST Repository

Fayed, Hassan E.

2015-03-30

A new boundary condition treatment has been devised for two-phase flow numerical simulations in a self-aerated minerals flotation machine and applied to a Wemco 0.8 m3 pilot cell. Airflow rate is not specified a priori but is predicted by the simulations as well as power consumption. Time-dependent simulations of two-phase flow in flotation machines are essential to understanding flow behavior and physics in self-aerated machines such as the Wemco machines. In this paper, simulations have been conducted for three different uniform bubble sizes (db = 0.5, 0.7 and 1.0 mm) to study the effects of bubble size on air holdup and hydrodynamics in Wemco pilot cells. Moreover, a computational fluid dynamics (CFD)-based flotation model has been developed to predict the pulp recovery rate of minerals from a flotation cell for different bubble sizes, different particle sizes and particle size distribution. The model uses a first-order rate equation, where models for probabilities of collision, adhesion and stabilization and collisions frequency estimated by Zaitchik-2010 model are used for the calculation of rate constant. Spatial distributions of dissipation rate and air volume fraction (also called void fraction) determined by the two-phase simulations are the input for the flotation kinetics model. The average pulp recovery rate has been calculated locally for different uniform bubble and particle diameters. The CFD-based flotation kinetics model is also used to predict pulp recovery rate in the presence of particle size distribution. Particle number density pdf and the data generated for single particle size are used to compute the recovery rate for a specific mean particle diameter. Our computational model gives a figure of merit for the recovery rate of a flotation machine, and as such can be used to assess incremental design improvements as well as design of new machines.

Traction sheave elevator, hoisting unit and machine space

Science.gov (United States)

Hakala, Harri; Mustalahti, Jorma; Aulanko, Esko

2000-01-01

Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

Development of a new concrete pipe molding machine using topology optimization

International Nuclear Information System (INIS)

Park, Hong Seok; Dahal, Prakash; Nguyen, Trung Thanh

2016-01-01

Sulfur polymer concrete (SPC) is a relatively new material used to replace Portland cement for manufacturing sewer pipes. The objective of this work is to develop an efficient molding machine with an inner rotating die to mix, compress and shape the SPC pipe. First, the alternative concepts were generated based on the TRIZ principles to overcome the drawbacks of existing machines. Then, the concept scoring technique was used to identify the best design in terms of machine structure and product quality. Finally, topology optimization was applied with the support of the density method to reduce mass and to displace the inner die. Results showed that the die volume can be reduced by approximately 9% and the displacement can be decreased by approximately 3% when compared with the initial design. This work is expected to improve the manufacturing efficiency of the concrete pipe molding machine

Development of a new concrete pipe molding machine using topology optimization

Energy Technology Data Exchange (ETDEWEB)

Park, Hong Seok; Dahal, Prakash [School of Mechanical and Automotive Engineering, University of Ulsan, Ulsan (Korea, Republic of); Nguyen, Trung Thanh [Faculty of Mechanical Engineering, Le Quy Don Technical University, Hanoi (Viet Nam)

2016-08-15

Sulfur polymer concrete (SPC) is a relatively new material used to replace Portland cement for manufacturing sewer pipes. The objective of this work is to develop an efficient molding machine with an inner rotating die to mix, compress and shape the SPC pipe. First, the alternative concepts were generated based on the TRIZ principles to overcome the drawbacks of existing machines. Then, the concept scoring technique was used to identify the best design in terms of machine structure and product quality. Finally, topology optimization was applied with the support of the density method to reduce mass and to displace the inner die. Results showed that the die volume can be reduced by approximately 9% and the displacement can be decreased by approximately 3% when compared with the initial design. This work is expected to improve the manufacturing efficiency of the concrete pipe molding machine.

The machinability of cast titanium and Ti-6Al-4V.

Science.gov (United States)

Ohkubo, C; Watanabe, I; Ford, J P; Nakajima, H; Hosoi, T; Okabe, T

2000-02-01

This study investigated the machinability (ease of metal removal) of commercially pure (CP) titanium and Ti-6Al-4V alloy. Both CP Ti and Ti-6Al-4V were cast into magnesia molds. Two types of specimens (with alpha-case and without alpha-case) were made for CP Ti and Ti-6Al-4V. Machinability (n = 5) was evaluated as volume loss (mm3) by cutting/grinding the 3.0 mm surface using fissure burs and silicon carbide (SiC) under two machining conditions: (1) two machining forces (100 or 300 gf) at two rotational speeds (15000 or 30000 rpm) for 1 min, and (2) constant machining force of 100 gf and rotational speed of 15000 rpm for 1, 2, 5, 10, and 30 min. As controls, conventionally cast Co-Cr and Type IV gold alloys were evaluated in the same manner as the titanium. When fissure burs were used, there was a significant difference in the machinability between CP titanium with alpha-case and without alpha-case. On the other hand, there was no appreciable difference in the amount of metal removed for each tested metal when using the SiC points.

The Effect of Group Counseling Program on 8th Grade Students’ Assertiveness Levels

Directory of Open Access Journals (Sweden)

İsmail SEÇER

2014-06-01

Full Text Available This study is conducted to determine the effects of group counseling program on elementary school 8th grade students’ assertiveness skills. Study group was formed of 100 students getting educated in Erzurum Kültür Elementary School in 2011-2012 education years. RAE-Rathus Assertiveness Schedule was applied on this group to gather data. 30 students getting lower scores from the inventory have been randomly divided into experimental and control groups. Each group is formed of 15 students. Group counseling program has been carried out for 8 weeks on the experimental group to improve the students’ assertiveness skills. Single-way and two-way analysis of covariance (ANCOVA has been used in the analysis of the data. The data is analyzed with SPSS 19.00. The results of the study show that assertiveness skills of the students who participate in the group counseling program has increased significantly compared to the control group and to the preexperimental circumstances. Besides, it is determined that the change observed in the experimental group has been occurred separately from the age and socio-economic level variables, and it is determined with the monitoring test applied after four months that this affect is continued. According to this result, it can be said that the applied group counseling program is an effective means to improve the assertiveness skills of elementary school students

The Machine within the Machine

CERN Multimedia

Katarina Anthony

2014-01-01

Although Virtual Machines are widespread across CERN, you probably won't have heard of them unless you work for an experiment. Virtual machines - known as VMs - allow you to create a separate machine within your own, allowing you to run Linux on your Mac, or Windows on your Linux - whatever combination you need.   Using a CERN Virtual Machine, a Linux analysis software runs on a Macbook. When it comes to LHC data, one of the primary issues collaborations face is the diversity of computing environments among collaborators spread across the world. What if an institute cannot run the analysis software because they use different operating systems? "That's where the CernVM project comes in," says Gerardo Ganis, PH-SFT staff member and leader of the CernVM project. "We were able to respond to experimentalists' concerns by providing a virtual machine package that could be used to run experiment software. This way, no matter what hardware they have ...

6th international symposium on finite volumes for complex applications

CERN Document Server

Halama, Jan; Herbin, Raphaèle; Hubert, Florence; Fort, Jaroslav; FVCA 6; Finite Volumes for Complex Applications VI : Problems and perspectives

2011-01-01

Finite volume methods are used for various applications in fluid dynamics, magnetohydrodynamics, structural analysis or nuclear physics. A closer look reveals many interesting phenomena and mathematical or numerical difficulties, such as true error analysis and adaptivity, modelling of multi-phase phenomena or fitting problems, stiff terms in convection/diffusion equations and sources. To overcome existing problems and to find solution methods for future applications requires many efforts and always new developments. The goal of The International Symposium on Finite Volumes for Complex Applica

Graduate Course Contract Law Deskbook (54th). Volume 1

Science.gov (United States)

2005-01-01

Corp. v. Am. Bakeries Co., 840 F. 2d 1333, 1341 (7th Cir. 1988)). c. The Government is not liable for acts of God that cause a reduction in...renew a license, permit, charter, franchise , or other similar grant to, or deny employment to, terminate employment of, or discriminate with respect...Burger King and McDonald’s franchise agreements violated two provisions of the Randolph-Sheppard Act: a. DOD failed to notify state licensing agencies

9th Annual Systems Engineering Conference: Volume 4 Thursday

Science.gov (United States)

2006-10-26

ISO /IEC 27000 series – Information Security Management System (ISMS) – ISO /IEC 17799:2005 – Code of Practice for Information Security Management...October 2006, Track 2 Standards Organizations Supporting Assurance ISO IEC JTC1TC176 SC1 SC22 Terminology Software Engineering Language, OS SC7...Information Assurance IEEE CS ISO IEC IEEE CS NIST FISMA Projects U.S. Gov’t DoD MIL-STDsPolicy Memos OMG Knowledge Discovery Models OMG 259th Annual

Distributed Autonomous Robotic Systems : the 12th International Symposium

CERN Document Server

Cho, Young-Jo

2016-01-01

This volume of proceedings includes 32 original contributions presented at the 12th International Symposium on Distributed Autonomous Robotic Systems (DARS 2014), held in November 2014. The selected papers in this volume are authored by leading researchers from Asia, Europe, and the Americas, thereby providing a broad coverage and perspective of the state-of-the-art technologies, algorithms, system architectures, and applications in distributed robotic systems. .

Crustal volumes of the continents and of oceanic and continental submarine plateaus

Science.gov (United States)

Schubert, G.; Sandwell, D.

1989-01-01

Using global topographic data and the assumption of Airy isostasy, it is estimated that the crustal volume of the continents is 7182 X 10 to the 6th cu km. The crustal volumes of the oceanic and continental submarine plateaus are calculated at 369 X 10 to the 6th cu km and 242 X 10 to the 6th cu km, respectively. The total continental crustal volume is found to be 7581 X 10 to the 6th cu km, 3.2 percent of which is comprised of continental submarine plateaus on the seafloor. An upper bound on the contintental crust addition rate by the accretion of oceanic plateaus is set at 3.7 cu km/yr. Subduction of continental submarine plateaus with the oceanic lithosphere on a 100 Myr time scale yields an upper bound to the continental crustal subtraction rate of 2.4 cu km/yr.

Proceedings of the 18th International Conference on Engineering Design

DEFF Research Database (Denmark)

The 18th International Conference on Engineering Design, ICED11, was held August 15-18th 2011 at The Technical University of Denmark (DTU), Copenhagen. The Conference is the flagship event of the Design Society, a society dedicated to contributing to a broad and established understanding of devel......The 18th International Conference on Engineering Design, ICED11, was held August 15-18th 2011 at The Technical University of Denmark (DTU), Copenhagen. The Conference is the flagship event of the Design Society, a society dedicated to contributing to a broad and established understanding...... of development and design. The ICED series of conferences has a long tradition, which started in 1981 with the first ICED in Rome. A total of 419 papers were presented at ICED11, each double-blind reviewed by multiple reviewers. The papers included research papers and case studies on a variety of topics...... concerned with design thinking, theory, and practice, with a premium placed on evidence-based research. The papers are published in a total of ten volumes of Proceedings, in addition to electronic publication. This volume is the first of two concerned with Design Methods and Tools, and contains 45 papers...

Machine Vision Systems for Processing Hardwood Lumber and Logs

Science.gov (United States)

Philip A. Araman; Daniel L. Schmoldt; Tai-Hoon Cho; Dongping Zhu; Richard W. Conners; D. Earl Kline

1992-01-01

Machine vision and automated processing systems are under development at Virginia Tech University with support and cooperation from the USDA Forest Service. Our goals are to help U.S. hardwood producers automate, reduce costs, increase product volume and value recovery, and market higher value, more accurately graded and described products. Any vision system is...

Contributions to the 14th symposium on fusion technology

Energy Technology Data Exchange (ETDEWEB)

Andreani, R.

1987-02-01

The FTU (Frascati Tokamak Upgrade) aims to achieve high values of nt and temperature. High densities and confinement times should be reached by the use of high magnetic fields (8T) and reduced size and a strong lower hybrid additional heating (8 MW at 8 GHz) will be applied to raise plasma temperature. The main features of the machine are: liquid nitrogen cooling, to reduce power and energy consumption, flexibility in plasma current and position control, all stainless steel vacum chamber, liner and limiter stuctures. The machine is presently in an advanced construction stage. The new 250 MVA flywheel generator and few component parts are already in Frascati in the new buildings and the project team is pushing to keep the envisaged timing that should see the first operation of the machine at room temperature at the end of 1987.

A MACHINE FOR PULVERIZING AND SIFTING GARI MASH

African Journals Online (AJOL)

Dr Obe

O.75kw electric motor. Fig. 2.Photograph of prototype gari pulverizing/sifting machine. A Side view of the Prototype Gari mash Pulverize/sifting machine. 1. Vee-belt drives; 2. Head pulley; 3 belt conveyor; 4, cake breaker, 5. tail pulley; 6. lump or cake of' gari mash;7hopper; 8pulverizing roller; 9. Side gaurds; 10.brush 11.

15th International Symposium of Robotic Research

CERN Document Server

Khatib, Oussama

2017-01-01

This volume presents a collection of papers presented at the 15th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 15th edition took place in Flagstaff, Arizona on December 9 to December 12, 2011. As for the previous symposia, ISRR 2011 followed up on the successful concept of a mixture of invited contributions and open submissions. Therefore approximately half of the 37 contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other half were chosen among the open submissions after peer review. This selection process resulted in a truly excellent technical program which featured some of the very best of robotic research. The program was organized around oral presentation in a single-track format and included for the first time a small number of interactive presentations. The symposium contributions contained in this volume report on a ...

6th International Workshop on Application of Lasers in Atomic Nuclei Research

CERN Document Server

Błaszczak, Z; Marinova, K; LASER 2004

2006-01-01

6th International Workshop on Application of Lasers in Atomic Nuclei Research, LASER 2004, held in Poznan, Poland, 24-27 May, 2004 Researchers and graduate students interested in the Mössbauer Effect and its applications will find this volume indispensable. The volume presents the most recent developments in the methodology of Mössbauer spectroscopy. Reprinted from Hyperfine Interactions (HYPE) Volume 162, 1-4

7th iTi Conference in Turbulence

CERN Document Server

Talamelli, Alessandro; Oberlack, Martin; Peinke, Joachim

2017-01-01

This volume collects the edited and reviewed contribution presented in the 7th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Theory II Wall bounded flows III Pipe flow IV Modelling V Experiments VII Miscellaneous topics.

National Public Information Symposium on Peaceful Uses of Nuclear Energy, NUC Info' 2000. Radioactive Waste Management and Site Restoration in Uranium Industry. Proceedings. Volume 2

International Nuclear Information System (INIS)

Dobos, Ion; Comsa, Olivia

2000-01-01

These proceedings published in two volumes contain materials presented at the National Public Information Symposium on Peaceful Uses of Nuclear Energy, NUC Info' 2000. Radioactive Waste Management and Site Restoration in Uranium Industry - held on 5th September to 8th September 2000 at Baita - Bihor, Romania. The proceedings are structured in 4 sections: 1. Management of radioactive wastes arising from uranium mining, milling and decommissioning; 2. Uranium mine closing down; 3. Environmental restoration of uranium mining and milling sites; 4. Management of radioactive wastes arising from nuclear applications. The contributions in this volume debate the issues of environment restoration at uranium ore mining and management of radioactive wastes resulted from nuclear applications

15th International Cryocooler Conference

CERN Document Server

Ross, Ronald G

2009-01-01

This is the 15th volume in the conference series. Over the years the International Cryocooler Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

14th International Cryocooler Conference

CERN Document Server

Ross, Ronald G

2007-01-01

This is the 14th volume in the conference series. Over the years the International Cryocoolers Conference has become the preeminent worldwide conference for the presentation of the latest developments and test experiences with cryocoolers. The typical applications of this technology include cooling space and terrestrial infrared focal plane arrays, space x-ray detectors, medical applications, and a growing number of high-temperature superconductor applications.

Sensor 2001 - 10th International conference. Vol. 1 and 2. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The proceedings of the 10th international conference on sensors 2001 consists of two volumes. Volume I contains works under the following headers: Automotive sensors, position and acceleration, biosensors, electronic nose and tongue, optical sensors, technology and materials, signal processing, marketing, simulation, smart home, wireless sensing. Main topics of volume II are: pressure and force, flow, gas sensors, the microsystems innovation forum, and all works presented in the poster sessions. (uke)

10 CFR 431.292 - Definitions concerning refrigerated bottled or canned beverage vending machines.

Science.gov (United States)

2010-01-01

.... Basic model means, with respect to refrigerated bottled or canned beverage vending machines, all units... beverages and dispenses the bottled or canned beverages on payment. V means the refrigerated volume (ft3) of...

TNF-α inhibitors reduce the pathological Th1 -Th17 /Th2 imbalance in cutaneous mesenchymal stem cells of psoriasis patients.

Science.gov (United States)

Campanati, Anna; Orciani, Monia; Lazzarini, Raffaella; Ganzetti, Giulia; Consales, Veronica; Sorgentoni, Giulia; Di Primio, Roberto; Offidani, Annamaria

2017-04-01

Psoriasis is a disease characterized by an imbalance between Th 1 and Th 17 and Th 2 inflammatory axes, in which cutaneous mesenchymal stem cells (MSCs) are early involved, as they show a greater relative expression of several genes encoding for Th 1 and Th 17 cytokines. Therapeutic implications of TNF-α inhibitors on differentiated skin cells have been largely described in psoriasis; however, their effects on MSCs derived from patients with psoriasis have been only partially described. The aim of this work was to evaluate the effect of TNF-α inhibitors on cytokine milieu expressed by MSCs isolated from the skin of patients with psoriasis. Resident MSCs from skin of patients with psoriasis and healthy subjects have been isolated, characterized and profiled by PCR and ELISA for the expression of 22 cytokines involved in Th 1 , Th 2 and Th 17 pathways, both before and after 12 weeks therapy with TNF-α inhibitors. The administration of TNF-α inhibitors for 12-weeks acts on MSCs as follows: it reduces the expression of several Th 1 -Th 17 cytokines whose levels are elevated at baseline (IL-6, IL-8, IL-12, IL-23A, IFN-γ, TNF-α, CCL2, CCL20, CXCL2, CXCL5, IL-17A, IL-17C, IL-17F, IL-21, G-CSF). Similarly, it enhances the expression of several Th 2 cytokines which are underexpressed at baseline (IL-2, IL-4, IL-5), reducing the expression of those overexpressed at baseline (TGF-β and IL-13). TNF-α inhibitors could contribute to reduce the pathological imbalance between the Th 1 -Th 17 vs Th 2 axis in MSCs of patients with psoriasis. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Electrochemical behavior of Th(IV) and its electrodeposition from ThF_4-LiCl-KCl melt

International Nuclear Information System (INIS)

Wang, Xianbin; Huang, Wei; Gong, Yu; Jiang, Feng; Zheng, Haiyang; Zhu, Tiejian; Long, Dewu; Li, Qingnuan

2016-01-01

The electrochemical behavior of Th(IV) ion on molybdenum (Mo) electrode was studied by cyclic voltammetry (CV) and square wave voltammetry (SWV) technologies at 773 K in ThF_4-LiCl-KCl melt. The reduction of Th(IV) to metal Th at −1.67 V (vs. Ag/AgCl) is a four-electron exchange process, which is quasi-reversible and diffusion-controlled. The diffusion coefficient (D) and activation energy of diffusion process for Th(IV) were determined to be 3.77 × 10"−"5 cm"2 s"−"1 and 59.2 kJ mol"−"1. The pulse potential electrolysis of ThF_4-LiCl-KCl melt revealed that 86.8% of Th(IV) can be separated from the melt based on the inductively coupled plasma atomic emission spectrometer (ICP-AES) results.

6th ICSAT

CERN Document Server

Subic, Aleksandar; Wellnitz, Jörg

2015-01-01

This volume collects the research papers presented at the 6th International Conference on Sustainable Automotive Technologies (ICSAT), Gothenburg, 2014. The topical focus lies on latest advances in vehicle technology related to sustainable mobility. ICSAT is the core and state-of-the-art conference in the field of new technologies for transportation. Research contributions from the US, Australia, Europe and Asia illustrate the pivotal role of the conference. The book provides an excellent overview of R&D activities at OEMs as well as in leading universities and laboratories.

Effect of Machining Velocity in Nanoscale Machining Operations

International Nuclear Information System (INIS)

Islam, Sumaiya; Khondoker, Noman; Ibrahim, Raafat

2015-01-01

The aim of this study is to investigate the generated forces and deformations of single crystal Cu with (100), (110) and (111) crystallographic orientations at nanoscale machining operation. A nanoindenter equipped with nanoscratching attachment was used for machining operations and in-situ observation of a nano scale groove. As a machining parameter, the machining velocity was varied to measure the normal and cutting forces. At a fixed machining velocity, different levels of normal and cutting forces were generated due to different crystallographic orientations of the specimens. Moreover, after machining operation percentage of elastic recovery was measured and it was found that both the elastic and plastic deformations were responsible for producing a nano scale groove within the range of machining velocities from 250-1000 nm/s. (paper)

Magnetic field-assisted electrochemical discharge machining

International Nuclear Information System (INIS)

Cheng, Chih-Ping; Mai, Chao-Chuang; Wu, Kun-Ling; Hsu, Yu-Shan; Yan, Biing-Hwa

2010-01-01

Electrochemical discharge machining (ECDM) is an effective unconventional method for micromachining in non-conducting materials, such as glass, quartz and some ceramics. However, since the spark discharge performance becomes unpredictable as the machining depth increases, it is hard to achieve precision geometry and efficient machining rate in ECDM drilling. One of the main factors for this is the lack of sufficient electrolyte flow in the narrow gap between the tool and the workpiece. In this study a magnetohydrodynamic (MHD) convection, which enhances electrolyte circulation has been applied to the ECDM process in order to upgrade the machining accuracy and efficiency. During electrolysis in the presence of a magnetic field, the Lorenz force induces the charged ions to form a MHD convection. The MHD convection then forces the electrolyte into movement, thus enhancing circulation of electrolyte. Experimental results show that the MHD convection induced by the magnetic field can effectively enhance electrolyte circulation in the micro-hole, which contributes to higher machining efficiency. Micro-holes in glass with a depth of 450 µm are drilled in less than 20 s. At the same time, better electrolyte circulation can prevent deterioration of gas film quality with increasing machining depth, while ensuring stable electrochemical discharge. The improvement in the entrance diameter thus achieved was 23.8% while that in machining time reached 57.4%. The magnetic field-assisted approach proposed in the research does not require changes in the machining setup or electrolyte but has proved to achieve significant enhancement in both accuracy and efficiency of ECDM.

Production of 231Pa and 232U by irradiation of 230Th/232Th mixtures

International Nuclear Information System (INIS)

Kluge, E.; Lieser, K.H.

1981-01-01

The production of 231 Pa and of 232 U by irradiating a 230 Th/ 232 Th mixture (containing 12 mol per cent 230 Th) in form of ThO 2 at a thermal neutron flux of 6.9 x 10 13 cm -2 s -1 for 4 months was investigated. Pa, U and Th were separated and the chemical yields were determined. 2.6% of the 230 Th were transformed into 231 Pa and 0.13% into 232 U. These values are higher than those calculated for a thermal flux, but lower than those calculated for a flux ratio epithermal to thermal = 0.03. 231 Pa and 232 U were isolated in form of a protactinium solution and of U 3 O 8 with 94.9 and 89.1% chemical yields, respectively. Foreign activities were not detected. Thorium was recuperated and isolated as ThO 2 , with a chemical yield of 93.6%. (orig.)

CAD/CAM/CAI Application for High-Precision Machining of Internal Combustion Engine Pistons

Directory of Open Access Journals (Sweden)

V. V. Postnov

2014-07-01

Full Text Available CAD/CAM/CAI application solutions for internal combustion engine pistons machining was analyzed. Low-volume technology of internal combustion engine pistons production was proposed. Fixture for CNC turning center was designed.

Abnormal brain structure as a potential biomarker for venous erectile dysfunction: evidence from multimodal MRI and machine learning.

Science.gov (United States)

Li, Lingli; Fan, Wenliang; Li, Jun; Li, Quanlin; Wang, Jin; Fan, Yang; Ye, Tianhe; Guo, Jialun; Li, Sen; Zhang, Youpeng; Cheng, Yongbiao; Tang, Yong; Zeng, Hanqing; Yang, Lian; Zhu, Zhaohui

2018-03-29

To investigate the cerebral structural changes related to venous erectile dysfunction (VED) and the relationship of these changes to clinical symptoms and disorder duration and distinguish patients with VED from healthy controls using a machine learning classification. 45 VED patients and 50 healthy controls were included. Voxel-based morphometry (VBM), tract-based spatial statistics (TBSS) and correlation analyses of VED patients and clinical variables were performed. The machine learning classification method was adopted to confirm its effectiveness in distinguishing VED patients from healthy controls. Compared to healthy control subjects, VED patients showed significantly decreased cortical volumes in the left postcentral gyrus and precentral gyrus, while only the right middle temporal gyrus showed a significant increase in cortical volume. Increased axial diffusivity (AD), radial diffusivity (RD) and mean diffusivity (MD) values were observed in widespread brain regions. Certain regions of these alterations related to VED patients showed significant correlations with clinical symptoms and disorder durations. Machine learning analyses discriminated patients from controls with overall accuracy 96.7%, sensitivity 93.3% and specificity 99.0%. Cortical volume and white matter (WM) microstructural changes were observed in VED patients, and showed significant correlations with clinical symptoms and dysfunction durations. Various DTI-derived indices of some brain regions could be regarded as reliable discriminating features between VED patients and healthy control subjects, as shown by machine learning analyses. • Multimodal magnetic resonance imaging helps clinicians to assess patients with VED. • VED patients show cerebral structural alterations related to their clinical symptoms. • Machine learning analyses discriminated VED patients from controls with an excellent performance. • Machine learning classification provided a preliminary demonstration of DTI

Fabrication and evaluation of a reservoir tillage machine to reduce runoff from farms with sprinkler irrigation systems

Directory of Open Access Journals (Sweden)

M. A Rostami

2016-09-01

performance, two factors contain of machine speed (in three levels of 5, 7.5 and 10 km h-1 and Arm's length (in two levels of 30 and 40 cm were evaluated. The machine was evaluated based on a completely randomized block factorial design with three replications. Effects of these factors on depth, distance and volume of basins and runoff were evaluated. Results and Discussion Mean comparisons of depth, distance and size of reservoirs in different machine forward speed and different Arm's length are summarized in Table 1 and 2. The results showed that the effect of arm length and forward speed on changes in the depth and volume of the reservoirs were significant at the probability level of one percent but changes of the distance between the reservoirs was only affected by Arm's length. The results also showed that increasing the forward speed from 5 to 10 km h-1 and increase the Arm's length from 30 to 40 cm increased depth, distance and volume of reservoirs. Reservoir tillage practices were control runoff in all plots. Conclusions In this research project, a reservoir tillage machine was built and assessed. Tillage unit of this machine is similar to the spider wheel. By this machine the small holes generated in the ground periodically. For evaluation of machine performance, effect of two factors, including machine speed and arm's length on depth, distance and volume of the basins were evaluated. The results showed that increasing the ground speed from 5 to 10 km h-1 and increase the arm's length from 30 to 40 cm increased depth, distance and volume of reservoirs. Reservoir tillage practices were controlled runoff in all plots.

10th International Conference on Vibration Problems

CERN Document Server

Horáček, Jaromír; Okrouhlík, Miloslav; Marvalová, Bohdana; Verhulst, Ferdinand; Sawicki, Jerzy; Vibration Problems ICOVP 2011

2011-01-01

This volume presents the Proceedings of the 10th International Conference on Vibration Problems, September 5-8, 2011, Prague, Czech Republic. Since they started in 1990 the ICOVP conferences have matured into a reference platform reflecting the state-of-the-art of dynamics in the broadest sense, bringing together scientists from different backgrounds who are actively working on vibration-related problems in theoretical, experimental and applied dynamics, thus facilitating a lively exchange of ideas, methods and results. Dynamics as a scientific discipline draws inspiration from a large variety of engineering areas, such as Mechanical and Civil Engineering, Aero and Space Technology, Wind and Earthquake Engineering and Transport and Building Machinery. Moreover, the basic research in dynamics nowadays includes many fields of theoretical physics and various interdisciplinary subject areas. ICOVP 2011 covers all branches of dynamics and offers the most up-to-date results and developments in a high-quality select...

Proceedings of IEEE Machine Learning for Signal Processing Workshop XV

DEFF Research Database (Denmark)

Larsen, Jan

These proceedings contains refereed papers presented at the Fifteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP’2005), held in Mystic, Connecticut, USA, September 28-30, 2005. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP) organized...... by the NNSP Technical Committee of the IEEE Signal Processing Society. The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized...... by the Machine Learning for Signal Processing Technical Committee with sponsorship of the IEEE Signal Processing Society. Following the practice started two years ago, the bound volume of the proceedings is going to be published by IEEE following the Workshop, and we are pleased to offer to conference attendees...

Characteristics determination of Tanka X-ray Diagnostic Machine Model RTO-125

International Nuclear Information System (INIS)

Trijoko, Susetyo; Nasukha; Suyati; Nugroho, Agung.

1993-01-01

Characteristics determination of Tanka X-ray diagnostic machine model RTO-125. The characteristics of X-ray machine used for examining patient should be known. The characteristics studied in this paper include : X-ray beam profile, coincidence of the light field with radiation field, peak voltage, radiation quality, stability of exposures, and linearity of exposures against time. Beam profile and radiation-field alignment were determined using X-ray film. Winconsin kVp test cassette was used to measure peak voltage. The quality of the radiation, represented by half-value layer (HVL), was measured using aluminium step-wedge. Stability and linearity of exposures were measured using ionization chamber detector having an air volume of 40 cc. The results of this study were documented for the TANKA X-ray machine model RTO-125 of PSPKR BATAN, and the method of this study could be applied for X-ray diagnostic machine in general. (authors). 6 refs., 2 tabs., 6 figs

4th International conference on Knowledge Discovery and Data Mining

CERN Document Server

Knowledge Discovery and Data Mining

2012-01-01

The volume includes a set of selected papers extended and revised from the 4th International conference on Knowledge Discovery and Data Mining, March 1-2, 2011, Macau, Chin.   This Volume is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of knowledge discovery and data mining and learning to disseminate their latest research results and exchange views on the future research directions of these fields. 108 high-quality papers are included in the volume.

International Symposium on Wind Energy Systems, 4th, Stockholm, Sweden, September 21-24, 1982, Proceedings. Volumes 1 & 2

Science.gov (United States)

Stephens, H. S.; Goodes, D. H.

Progress in theoretical, meteorological, and hardware development sectors of wind energy utilization is assessed for various national programs. Wind regime characterization studies in Agentina, China, Indonesia, Norway, the U.S., Canada, Sweden, Hawaii, and offshore of the U.K. are reported. Data gained from wind turbine test sites in the U.S., Denmark, Holland, Germany, and the Netherlands are outlined. Attention is focused on the economics of wind turbine production for utility, agricultural, and third party purposes, with mention made of utilizing the resource appropriately for areas of installation of the wind powered machinery. Analyses are made of diurnal wind variations compared to diurnal demands on conventinal electricity generating power stations. Performance projections are made for wind farms featuring multi-MW machines, taking into account grid inteconnection factors, electrical control, power ramps, and environmental considerations. Mention is made of aeroelastics, dynamics, and the aerodynamics of wind turbines and rotor blades. Finally, icing, noise, fatigue failure, and blade throw problem are discussed, together with wind turbine licensing procedures in Denmark. No invidivual items are abstracted in these volumes

Prediction of Machine Tool Condition Using Support Vector Machine

International Nuclear Information System (INIS)

Wang Peigong; Meng Qingfeng; Zhao Jian; Li Junjie; Wang Xiufeng

2011-01-01

Condition monitoring and predicting of CNC machine tools are investigated in this paper. Considering the CNC machine tools are often small numbers of samples, a condition predicting method for CNC machine tools based on support vector machines (SVMs) is proposed, then one-step and multi-step condition prediction models are constructed. The support vector machines prediction models are used to predict the trends of working condition of a certain type of CNC worm wheel and gear grinding machine by applying sequence data of vibration signal, which is collected during machine processing. And the relationship between different eigenvalue in CNC vibration signal and machining quality is discussed. The test result shows that the trend of vibration signal Peak-to-peak value in surface normal direction is most relevant to the trend of surface roughness value. In trends prediction of working condition, support vector machine has higher prediction accuracy both in the short term ('One-step') and long term (multi-step) prediction compared to autoregressive (AR) model and the RBF neural network. Experimental results show that it is feasible to apply support vector machine to CNC machine tool condition prediction.

Proceedings of the 8th symposium on JAERI's Reimei research program

International Nuclear Information System (INIS)

Shibata, Takemasa

2004-12-01

The Reimei (Dawn) Research Program is a research project based on public application to be conducted within the framework of the Reimei Research Promotion Project of the Japan Atomic Energy Research Institute. The objective of the system is to encourage often vague and/or unique ideas in the field of fundamental nuclear science and nuclear energy. The symposium on JAERI's Reimei Research Program carried out in the 2003 fiscal year was held at Tokai Research Establishment on 29th and 30th of June 2004. 42 papers were reported through the short presentation followed by the poster presentation, and the active discussions was carried out by about 120 attendees. Those presented papers are compiled in the proceedings. We hope that new researches will be grown and developed by the help of Reimei Research Promotion Project. The 40 of the presented papers are indexed individually. (J.P.N.)

8th Rochester Conference on Coherence and Quantum Optics

CERN Document Server

2001-01-01

The Eighth Rochester Conference on Coherence and Quantum Optics was held on the campus of the University of Rochester during the period June 13-16,2001. This volume contains the proceedings of the meeting. The meeting was preceded by an affiliated conference, the International Conference on Quantum Information, with some overlapping sessions on June 13. The proceedings of the affiliated conference will be published separately by the Optical Society of America. A few papers that were presented in common plenary sessions of the two conferences will be published in both proceedings volumes. More than 268 scientists from 28 countries participated in the week long discussions and presentations. This Conference differed from the previous seven in the CQO series in several ways, the most important of which was the absence of Leonard Mandel. Professor Mandel died a few months before the conference. A special memorial symposium in his honor was held at the end of the conference. The presentations from that sym...

Thermal and electric conductivity of Cu50Zr35Ti8Hf5Nb2 volume amorphous alloy

International Nuclear Information System (INIS)

Gavrenko, O.A.; Merisov, B.A.; Mikhajlova, T.N.; Molokanov, V.V.; Sologubenko, A.V.; Khadzhaj, G.Ya.

1996-01-01

The temperature dependences of thermal conductivity and electric resistance of the Cu 50 Zr 35 Ti 8 Hf 5 Nb 2 volume amorphous alloy experimentally studied within the temperature range of 1.8-240 K. The temperature dependence of electrical resistance is well described by the ratio, taking into account the electron scattering on the phonons and in the two-level systems