WorldWideScience

Sample records for machine-independent fortran iv

  1. Fortran

    CERN Document Server

    Marateck, Samuel L

    1977-01-01

    FORTRAN is written for students who have no prior knowledge of computers or programming. The book aims to teach students how to program using the FORTRAN language.The publication first elaborates on an introduction to computers and programming, introduction to FORTRAN, and calculations and the READ statement. Discussions focus on flow charts, rounding numbers, strings, executing the program, the WRITE and FORMAT statements, performing an addition, input and output devices, and algorithms. The text then takes a look at functions and the IF statement and the DO Loop, the IF-THEN-ELSE and the WHI

  2. Real time interrupt handling using FORTRAN IV plus under RSX-11M

    International Nuclear Information System (INIS)

    Schultz, D.E.

    1981-01-01

    A real-time data acquisition application for a linear accelerator is described. The important programming features of this application are use of connect to interrupt, a shared library, map to I/O page, and a shared data area. How you can provide rapid interrupt handling using these tools from FORTRAN IV PLUS is explained

  3. PUBG; purex solvent extraction process model. [IBM3033; CDC CYBER175; FORTRAN IV

    Energy Technology Data Exchange (ETDEWEB)

    Geldard, J.F.; Beyerlein, A.L.

    PUBG is a chemical model of the Purex solvent extraction system, by which plutonium and uranium are recovered from spent nuclear fuel rods. The system comprises a number of mixer-settler banks. This discrete stage structure is the basis of the algorithms used in PUBG. The stages are connected to provide for countercurrent flow of the aqueous and organic phases. PUBG uses the common convention that has the aqueous phase enter at the lowest numbered stage and exit at the highest one; the organic phase flows oppositely. The volumes of the mixers are smaller than those of the settlers. The mixers generate a fine dispersion of one phase in the other. The high interfacial area is intended to provide for rapid mass transfer of the plutonium and uranium from one phase to the other. The separation of this dispersion back into the two phases occurs in the settlers. The species considered by PUBG are Hydrogen (1+), Plutonium (4+), Uranyl Oxide (2+), Plutonium (3+), Nitrate Anion, and reductant in the aqueous phase and Hydrogen (1+), Uranyl Oxide (2+), Plutonium (4+), and TBP (tri-n-butylphosphate) in the organic phase. The reductant used in the Purex process is either Uranium (4+) or HAN (hydroxylamine nitrate).IBM3033;CDC CYBER175; FORTRAN IV; OS/MVS or OS/MVT (IBM3033), NOS 1.3 (CDC CYBER175); The IBM3033 version requires 150K bytes of memory for execution; 62,000 (octal) words are required by the CDC CYBER175 version..

  4. RAGBEEF: a FORTRAN IV implementation of a time-dependent model for radionuclide contamination of beef

    Energy Technology Data Exchange (ETDEWEB)

    Pleasant, J C; McDowell-Boyer, L M; Killough, G G

    1982-06-01

    RAGBEEF is a FORTRAN IV program that calculates radionuclide concentrations in beef as a result of ingestion of contaminated feeds, pasture, and pasture soil by beef cattle. The model implemented by RAGBEEF is dynamic in nature, allowing the user to consider age- and season-dependent aspects of beef cattle management in estimating concentrations in beef. It serves as an auxiliary code to RAGTIME, previously documented by the authors, which calculates radionuclide concentrations in agricultural crops in a dynamic manner, but evaluates concentrations in beef for steady-state conditions only. The time-dependent concentrations in feeds, pasture, and pasture soil generated by RAGTIME are used as input to the RAGBEEF code. RAGBEEF, as presently implemented, calculates radionuclide concentrations in the muscle of age-based cohorts in a beef cattle herd. Concentrations in the milk of lactating cows are also calculated, but are assumed age-dependent as in RAGTIME. Radionuclide concentrations in beef and milk are described in RAGBEEF by a system of ordinary linear differential equations in which the transfer rate of radioactivity between compartments is proportional to the inventory of radioactivity in the source compartment. This system is solved by use of the GEAR package for solution of systems of ordinary differential equations. The accuracy of this solution is monitored at various check points by comparison with explicit solutions of Bateman-type equations. This report describes the age- and season-dependent considerations making up the RAGBEEF model, as well as presenting the equations which describe the model and a documentation of the associated computer code. Listings of the RAGBEEF and updated RAGTIME codes are provided in appendices, as are the results of a sample run of RAGBEEF and a description of recent modifications to RAGTIME.

  5. RAGBEEF: a FORTRAN IV implementation of a time-dependent model for radionuclide contamination of beef

    International Nuclear Information System (INIS)

    Pleasant, J.C.; McDowell-Boyer, L.M; Killough, G.G.

    1982-06-01

    RAGBEEF is a FORTRAN IV program that calculates radionuclide concentrations in beef as a result of ingestion of contaminated feeds, pasture, and pasture soil by beef cattle. The model implemented by RAGBEEF is dynamic in nature, allowing the user to consider age- and season-dependent aspects of beef cattle management in estimating concentrations in beef. It serves as an auxiliary code to RAGTIME, previously documented by the authors, which calculates radionuclide concentrations in agricultural crops in a dynamic manner, but evaluates concentrations in beef for steady-state conditions only. The time-dependent concentrations in feeds, pasture, and pasture soil generated by RAGTIME are used as input to the RAGBEEF code. RAGBEEF, as presently implemented, calculates radionuclide concentrations in the muscle of age-based cohorts in a beef cattle herd. Concentrations in the milk of lactating cows are also calculated, but are assumed age-dependent as in RAGTIME. Radionuclide concentrations in beef and milk are described in RAGBEEF by a system of ordinary linear differential equations in which the transfer rate of radioactivity between compartments is proportional to the inventory of radioactivity in the source compartment. This system is solved by use of the GEAR package for solution of systems of ordinary differential equations. The accuracy of this solution is monitored at various check points by comparison with explicit solutions of Bateman-type equations. This report describes the age- and season-dependent considerations making up the RAGBEEF model, as well as presenting the equations which describe the model and a documentation of the associated computer code. Listings of the RAGBEEF and updated RAGTIME codes are provided in appendices, as are the results of a sample run of RAGBEEF and a description of recent modifications to RAGTIME

  6. Standard Fortran

    International Nuclear Information System (INIS)

    Marshall, N.H.

    1981-01-01

    Because of its vast software investment in Fortran programs, the nuclear community has an inherent interest in the evolution of Fortran. This paper reviews the impact of the new Fortran 77 standard and discusses the projected changes which can be expected in the future

  7. Smile (System/Machine-Independent Local Environment)

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, J.G.

    1988-04-01

    This document defines the characteristics of Smile, a System/machine-independent local environment. This environment consists primarily of a number of primitives (types, macros, procedure calls, and variables) that a program may use; these primitives provide facilities, such as memory allocation, timing, tasking and synchronization beyond those typically provided by a programming language. The intent is that a program will be portable from system to system and from machine to machine if it relies only on the portable aspects of its programming language and on the Smile primitives. For this to be so, Smile itself must be implemented on each system and machine, most likely using non-portable constructions; that is, while the environment provided by Smile is intended to be portable, the implementation of Smile is not necessarily so. In order to make the implementation of Smile as easy as possible and thereby expedite the porting of programs to a new system or a new machine, Smile has been defined to provide a minimal portable environment; that is, simple primitives are defined, out of which more complex facilities may be constructed using portable procedures. The implementation of Smile can be as any of the following: the underlying software environment for the operating system of an otherwise {open_quotes}bare{close_quotes} machine, a {open_quotes}guest{close_quotes} system environment built upon a preexisting operating system, an environment within a {open_quotes}user{close_quotes} process run by an operating system, or a single environment for an entire machine, encompassing both system and {open_quotes}user{close_quotes} processes. In the first three of these cases the tasks provided by Smile are {open_quotes}lightweight processes{close_quotes} multiplexed within preexisting processes or the system, while in the last case they also include the system processes themselves.

  8. HTCAP: a FORTRAN IV program for calculating coated-particle operating temperatures in HFIR target irradiation experiments

    International Nuclear Information System (INIS)

    Kania, M.J.

    1976-05-01

    A description is presented of HTCAP, a computer code that calculates in-reactor operating temperatures of loose coated ThO 2 particles in the HFIR target series of irradiation tests. Three computational models are employed to determine the following: (1) fission heat generation rates, (2) capsule heat transfer analysis, and (3) maximum particle surface temperature within the design of an HT capsule. Maximum particle operating temperatures are calculated at daily intervals during each irradiation cycle. The application of HTCAP to sleeve CP-62 of HT-15 is discussed, and the results are compared with those obtained in an earlier thermal analysis on the same capsule. Agreement is generally within +-5 percent, while decreasing the computational time by more than an order of magnitude. A complete FORTRAN listing and summary of required input data are presented in appendices. Included is a listing of the input data and a tabular output from the thermal analysis of sleeve CP-62 of HT-15

  9. PNP2 calculus programme for interpretation of the experimental data by pulsed source neutrons methods. (Pt. 1). [Fortran IV for ICT 1900

    Energy Technology Data Exchange (ETDEWEB)

    Fratiloiu, C; Cristea, Gh

    1975-01-01

    PNP2 is a calculation programme destined to the interpretation of the experimental data by the pulsed source neutrons method on multiplyer environments into critic or subcritic state, populated with thermal neutrons. The programme is elaborate in the FORTRAN IV language of the ICT 1900 computer. The variation form in time of the thermal neutrons population for the multiplyer environments as a result of this whipping to the moments t=KT, with pockets of neutrons, appearing in the simplified theory of the pulsed source neutrons method. By this process are determinated the quantities Nsub(..cap alpha..), ..cap alpha.., Nsub(r) and B as well as empiric variants which affect these magnitudes. With these quantities is calculated the reactivity in relative units.

  10. Scientific Programming in Fortran

    Directory of Open Access Journals (Sweden)

    W. Van Snyder

    2007-01-01

    Full Text Available The Fortran programming language was designed by John Backus and his colleagues at IBM to reduce the cost of programming scientific applications. IBM delivered the first compiler for its model 704 in 1957. IBM's competitors soon offered incompatible versions. ANSI (ASA at the time developed a standard, largely based on IBM's Fortran IV in 1966. Revisions of the standard were produced in 1977, 1990, 1995 and 2003. Development of a revision, scheduled for 2008, is under way. Unlike most other programming languages, Fortran is periodically revised to keep pace with developments in language and processor design, while revisions largely preserve compatibility with previous versions. Throughout, the focus on scientific programming, and especially on efficient generated programs, has been maintained.

  11. SVM Support in the Vienna Fortran Compilation System

    OpenAIRE

    Brezany, Peter; Gerndt, Michael; Sipkova, Viera

    1994-01-01

    Vienna Fortran, a machine-independent language extension to Fortran which allows the user to write programs for distributed-memory systems using global addresses, provides the forall-loop construct for specifying irregular computations that do not cause inter-iteration dependences. Compilers for distributed-memory systems generate code that is based on runtime analysis techniques and is only efficient if, in addition, aggressive compile-time optimizations are applied. Since these optimization...

  12. SAMPO, A Fortran IV Program for Computer Analysis of Gamma Spectrafrom Ge(Li) Detectors, and for Other Spectra with Peaks

    Energy Technology Data Exchange (ETDEWEB)

    Routti, Jorma T.

    1969-10-20

    SAMPO is a Fortran IV program written to perform the data- reduction analysis described by J. T. Routti and S. G. Prussin in Photopeak Method for the Computer Analysis of Gamma-Ray Spectra from Semiconductor Detectors, Nuclear Instruments and Methods 72, 125-142 (1969). The code has also been used to analyze other spectra with peaks and continua. Program SAMPO can be used for an automatic off-line or an interactive on-line analysis. It includes algorithms for line-shape, energy, and efficiency calibrations, and peak-search and peak-fitting routines. Different options are available to make the code applicable to accurate nuclear spectroscopic work as well as to routine data reduction. The mathematical methods and their coding are briefly described. Instructions for using the program and for preparing input data are given and the optimal strategies for running the code are discussed. Instructions are given for using the LRL program library version of SAMPO and for obtaining source decks.

  13. GASCON and MHDGAS: FORTRAN IV computer codes for calculating gas and condensed-phase compositions in the coal-fired open-cycle MHD system

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, P E

    1977-12-01

    Fortran IV computer codes have been written to calculate the equilibrium partial pressures of the gaseous phase and the quantity and composition of the condensed phases in the open-cycle MHD system. The codes are based on temperature-dependent equilibrium constants, mass conservation, the mass action law, and assumed ideal solution of compounds in each of two condensed phases. It is assumed that the phases are an oxide-silicate phase and a sulfate-carbonate-hydroxide phase. Calculations are iterated for gas and condensate concentrations while increasing or decreasing the total moles of elements, but keeping mole ratios constant, to achieve the desired total pressure. During iteration the oxygen partial pressure is incrementally changed. The decision to increase or decrease the oxygen pressure in this process depends on comparison of the oxygen content calculated in the gas and condensate phases with the initial amount of oxygen in the ash, coal, seed, and air. This process, together with a normalization step, allows the elements to converge to their initial quantities. Two versions of the computer code have been written. GASCON calculates the equilibrium gas partial pressures and the quantity and composition of the condensed phases in steps of thirteen temperature and pressure combinations in which the condensate is removed after each step, simulating continuous slag removal from the MHD system. MHDGAS retains the condensate for each step, simulating flow of condensate (and gas) through the MHD system.

  14. Programming in Fortran M

    Energy Technology Data Exchange (ETDEWEB)

    Foster, I.; Olson, R.; Tuecke, S.

    1993-08-01

    Fortran M is a small set of extensions to Fortran that supports a modular approach to the construction of sequential and parallel programs. Fortran M programs use channels to plug together processes which may be written in Fortran M or Fortran 77. Processes communicate by sending and receiving messages on channels. Channels and processes can be created dynamically, but programs remain deterministic unless specialized nondeterministic constructs are used. Fortran M programs can execute on a range of sequential, parallel, and networked computers. This report incorporates both a tutorial introduction to Fortran M and a users guide for the Fortran M compiler developed at Argonne National Laboratory. The Fortran M compiler, supporting software, and documentation are made available free of charge by Argonne National Laboratory, but are protected by a copyright which places certain restrictions on how they may be redistributed. See the software for details. The latest version of both the compiler and this manual can be obtained by anonymous ftp from Argonne National Laboratory in the directory pub/fortran-m at info.mcs.anl.gov.

  15. Modern Fortran in practice

    NARCIS (Netherlands)

    Markus, A.

    2012-01-01

    From its earliest days, the Fortran programming language has been designed with computing efficiency in mind. The latest standard, Fortran 2008, incorporates a host of modern features, including object-orientation, array operations, user-defined types, and provisions for parallel computing. This

  16. FPP: A Fortran preprocessor

    International Nuclear Information System (INIS)

    Boyarski, A.

    1992-11-01

    FPP is a preprocessor which aids in porting Fortran source code across differing platforms. It provides conditional compilation features to enable or disable sections of code, and can modify file names in INCLUDE statements to a syntax suitable for a target platform. FPP is written Fortran 77, and runs on VM/CMS, VAX/VMS, UNIX, and PC/DOS SYSTEMS

  17. PRP: a FORTRAN IV interactive plotting program

    Science.gov (United States)

    Andrew, A. S.; Linde, J.

    A computer program, PRP, has been designed to plot any arithmetic combination selected from a set of major and trace element data on a y- x graph. y and x are defined and entered as a program string (y, x) which is interpreted sequentially. Operators ( +, -, ∗, /, ( unary) , square root, log 10, In c, antilog 10, exponential, integer, absolute value, (,),,) and integer or real numbers may be included. Axis lengths and scales are determined by the user. Five different plotting symbols are available.

  18. Strategies and Experiences Using High Performance Fortran

    National Research Council Canada - National Science Library

    Shires, Dale

    2001-01-01

    .... High performance Fortran (HPF) is a relative new addition to the Fortran dialect It is an attempt to provide an efficient high-level Fortran parallel programming language for the latest generation of been debatable...

  19. A Note on Compiling Fortran

    Energy Technology Data Exchange (ETDEWEB)

    Busby, L. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-01

    Fortran modules tend to serialize compilation of large Fortran projects, by introducing dependencies among the source files. If file A depends on file B, (A uses a module defined by B), you must finish compiling B before you can begin compiling A. Some Fortran compilers (Intel ifort, GNU gfortran and IBM xlf, at least) offer an option to ‘‘verify syntax’’, with the side effect of also producing any associated Fortran module files. As it happens, this option usually runs much faster than the object code generation and optimization phases. For some projects on some machines, it can be advantageous to compile in two passes: The first pass generates the module files, quickly; the second pass produces the object files, in parallel. We achieve a 3.8× speedup in the case study below.

  20. Reformulation RELAP5-3D in FORTRAN 95 and Results

    International Nuclear Information System (INIS)

    Mesina, George L.

    2010-01-01

    RELAP5-3D is a nuclear power plant code used worldwide for safety analysis, design, and operator training. In keeping with ongoing developments in the computing industry, we have re-architected the code in the FORTRAN 95 language, the current, fully-available, FORTRAN language. These changes include a complete reworking of the database and conversion of the source code to take advantage of new constructs. The improvements and impacts to the code are manifold. It is a completely machine-independent code that produces machine independent fluid property and plot files and expands to the exact size needed to accommodate the user's input. Runtime is generally better for larger input models. Other impacts of code conversion are improved code readability, reduced maintenance and development time, increased adaptability to new computing platforms, and increased code longevity. The conversion methodology, code improvements and testing upgrades are presented in a manner that will be useful to future conversion projects for other such large codes. Comparison between the pre- and post-conversion code are made on the basis of code metrics and code performance.

  1. Replacing Fortran Namelists with JSON

    Science.gov (United States)

    Robinson, T. E., Jr.

    2017-12-01

    Maintaining a log of input parameters for a climate model is very important to understanding potential causes for answer changes during the development stages. Additionally, since modern Fortran is now interoperable with C, a more modern approach to software infrastructure to include code written in C is necessary. Merging these two separate facets of climate modeling requires a quality control for monitoring changes to input parameters and model defaults that can work with both Fortran and C. JSON will soon replace namelists as the preferred key/value pair input in the GFDL model. By adding a JSON parser written in C into the model, the input can be used by all functions and subroutines in the model, errors can be handled by the model instead of by the internal namelist parser, and the values can be output into a single file that is easily parsable by readily available tools. Input JSON files can handle all of the functionality of a namelist while being portable between C and Fortran. Fortran wrappers using unlimited polymorphism are crucial to allow for simple and compact code which avoids the need for many subroutines contained in an interface. Errors can be handled with more detail by providing information about location of syntax errors or typos. The output JSON provides a ground truth for values that the model actually uses by providing not only the values loaded through the input JSON, but also any default values that were not included. This kind of quality control on model input is crucial for maintaining reproducibility and understanding any answer changes resulting from changes in the input.

  2. NETS - A NEURAL NETWORK DEVELOPMENT TOOL, VERSION 3.0 (MACHINE INDEPENDENT VERSION)

    Science.gov (United States)

    Baffes, P. T.

    1994-01-01

    allows the user to generate C code to implement the network loaded into the system. This permits the placement of networks as components, or subroutines, in other systems. In short, once a network performs satisfactorily, the Generate C Code option provides the means for creating a program separate from NETS to run the network. Other features: files may be stored in binary or ASCII format; multiple input propagation is permitted; bias values may be included; capability to scale data without writing scaling code; quick interactive testing of network from the main menu; and several options that allow the user to manipulate learning efficiency. NETS is written in ANSI standard C language to be machine independent. The Macintosh version (MSC-22108) includes code for both a graphical user interface version and a command line interface version. The machine independent version (MSC-21588) only includes code for the command line interface version of NETS 3.0. The Macintosh version requires a Macintosh II series computer and has been successfully implemented under System 7. Four executables are included on these diskettes, two for floating point operations and two for integer arithmetic. It requires Think C 5.0 to compile. A minimum of 1Mb of RAM is required for execution. Sample input files and executables for both the command line version and the Macintosh user interface version are provided on the distribution medium. The Macintosh version is available on a set of three 3.5 inch 800K Macintosh format diskettes. The machine independent version has been successfully implemented on an IBM PC series compatible running MS-DOS, a DEC VAX running VMS, a SunIPC running SunOS, and a CRAY Y-MP running UNICOS. Two executables for the IBM PC version are included on the MS-DOS distribution media, one compiled for floating point operations and one for integer arithmetic. The machine independent version is available on a set of three 5.25 inch 360K MS-DOS format diskettes (standard

  3. Fortran 90 for scientists and engineers

    CERN Document Server

    Hahn, Brian

    1994-01-01

    The introduction of the Fortran 90 standard is the first significant change in the Fortran language in over 20 years. this book is designed for anyone wanting to learn Fortran for the first time or or a programmer who needs to upgrade from Fortran 77 to Fortran 90.Employing a practical, problem-based approach this book provides a comprehensive introduction to the language. More experienced programmers will find it a useful update to the new standard and will benefit from the emphasis on science and engineering applications.

  4. LFK, FORTRAN Application Performance Test

    International Nuclear Information System (INIS)

    McMahon, F.H.

    1991-01-01

    1 - Description of program or function: LFK, the Livermore FORTRAN Kernels, is a computer performance test that measures a realistic floating-point performance range for FORTRAN applications. Informally known as the Livermore Loops test, the LFK test may be used as a computer performance test, as a test of compiler accuracy (via checksums) and efficiency, or as a hardware endurance test. The LFK test, which focuses on FORTRAN as used in computational physics, measures the joint performance of the computer CPU, the compiler, and the computational structures in units of Mega-flops/sec or Mflops. A C language version of subroutine KERNEL is also included which executes 24 samples of C numerical computation. The 24 kernels are a hydrodynamics code fragment, a fragment from an incomplete Cholesky conjugate gradient code, the standard inner product function of linear algebra, a fragment from a banded linear equations routine, a segment of a tridiagonal elimination routine, an example of a general linear recurrence equation, an equation of state fragment, part of an alternating direction implicit integration code, an integrate predictor code, a difference predictor code, a first sum, a first difference, a fragment from a two-dimensional particle-in-cell code, a part of a one-dimensional particle-in-cell code, an example of how casually FORTRAN can be written, a Monte Carlo search loop, an example of an implicit conditional computation, a fragment of a two-dimensional explicit hydrodynamics code, a general linear recurrence equation, part of a discrete ordinates transport program, a simple matrix calculation, a segment of a Planck distribution procedure, a two-dimensional implicit hydrodynamics fragment, and determination of the location of the first minimum in an array. 2 - Method of solution: CPU performance rates depend strongly on the maturity of FORTRAN compiler machine code optimization. The LFK test-bed executes the set of 24 kernels three times, resetting the DO

  5. VFC: The Vienna Fortran Compiler

    Directory of Open Access Journals (Sweden)

    Siegfried Benkner

    1999-01-01

    Full Text Available High Performance Fortran (HPF offers an attractive high‐level language interface for programming scalable parallel architectures providing the user with directives for the specification of data distribution and delegating to the compiler the task of generating an explicitly parallel program. Available HPF compilers can handle regular codes quite efficiently, but dramatic performance losses may be encountered for applications which are based on highly irregular, dynamically changing data structures and access patterns. In this paper we introduce the Vienna Fortran Compiler (VFC, a new source‐to‐source parallelization system for HPF+, an optimized version of HPF, which addresses the requirements of irregular applications. In addition to extended data distribution and work distribution mechanisms, HPF+ provides the user with language features for specifying certain information that decisively influence a program’s performance. This comprises data locality assertions, non‐local access specifications and the possibility of reusing runtime‐generated communication schedules of irregular loops. Performance measurements of kernels from advanced applications demonstrate that with a high‐level data parallel language such as HPF+ a performance close to hand‐written message‐passing programs can be achieved even for highly irregular codes.

  6. An Introduction to High Performance Fortran

    Directory of Open Access Journals (Sweden)

    John Merlin

    1995-01-01

    Full Text Available High Performance Fortran (HPF is an informal standard for extensions to Fortran 90 to assist its implementation on parallel architectures, particularly for data-parallel computation. Among other things, it includes directives for specifying data distribution across multiple memories, and concurrent execution features. This article provides a tutorial introduction to the main features of HPF.

  7. READDATA: a FORTRAN 77 codeword input package

    International Nuclear Information System (INIS)

    Lander, P.A.

    1983-07-01

    A new codeword input package has been produced as a result of the incompatibility between different dialects of FORTRAN, especially when character variables are passed as parameters. This report is for those who wish to use a codeword input package with FORTRAN 77. The package, called ''Readdata'', attempts to combine the best features of its predecessors such as BINPUT and pseudo-BINPUT. (author)

  8. Mass: Fortran program for calculating mass-absorption coefficients

    International Nuclear Information System (INIS)

    Nielsen, Aa.; Svane Petersen, T.

    1980-01-01

    Determinations of mass-absorption coefficients in the x-ray analysis of trace elements are an important and time consuming part of the arithmetic calculation. In the course of time different metods have been used. The program MASS calculates the mass-absorption coefficients from a given major element analysis at the x-ray wavelengths normally used in trace element determinations and lists the chemical analysis and the mass-absorption coefficients. The program is coded in FORTRAN IV, and is operational on the IBM 370/165 computer, on the UNIVAC 1110 and on PDP 11/05. (author)

  9. Programs in Fortran language for reporting the results of the analyses by ICP emission spectroscopy

    International Nuclear Information System (INIS)

    Roca, M.

    1985-01-01

    Three programs, written in FORTRAN IV language, for reporting the results of the analyses by ICP emission spectroscopy from data stored in files on floppy disks have been developed. They are intended, respectively, for the analyses of: 1) waters, 2) granites and slates, and 3) different kinds of geological materials. (Author) 8 refs

  10. High Performance Fortran for Aerospace Applications

    National Research Council Canada - National Science Library

    Mehrotra, Piyush

    2000-01-01

    .... HPF is a set of Fortran extensions designed to provide users with a high-level interface for programming data parallel scientific applications while delegating to the compiler/runtime system the task...

  11. Fortran Testing and Refactoring Infrastructure, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Tech-X proposes to develop a comprehensive Fortran testing and refactoring infrastructure that allows developers and scientists to leverage the benefits of a...

  12. Fortran Testing and Refactoring Infrastructure, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Tech-X proposes to develop a comprehensive Fortran testing and refactoring infrastructure that allows developers and scientists to leverage the benefits of...

  13. C Versus Fortran-77 for Scientific Programming

    Directory of Open Access Journals (Sweden)

    Tom MacDonald

    1992-01-01

    Full Text Available The predominant programming language for numeric and scientific applications is Fortran-77 and supercomputers are primarily used to run large-scale numeric and scientific applications. Standard C* is not widely used for numerical and scientific programming, yet Standard C provides many desirable linguistic features not present in Fortran-77. Furthermore, the existence of a standard library and preprocessor eliminates the worst portability problems. A comparison of Standard C and Fortran-77 shows several key deficiencies in C that reduce its ability to adequately solve some numerical problems. Some of these problems have already been addressed by the C standard but others remain. Standard C with a few extensions and modifications could be suitable for all numerical applications and could become more popular in supercomputing environments.

  14. IRRIGOGRAPHY AFTER PREPARATIONS OF PATIENTS WITH FORTRANS

    Directory of Open Access Journals (Sweden)

    Irena Jankovic

    2006-01-01

    Full Text Available Fortrans® is a laxative in the form of the powder which is used for making solution for oral application. Laxative effects are achieved over long linear polymer (polyethylene-glikol - PEG 4000 which binds water molecules, increasing thus the volume of fluids in the intestinal tract.Material of study comprises 150 irrigographies made at the Institute of Radiology of the Clinical Center in Nis in the period from January 2004 to Jun 2005.The preparation in these cases was done by Fortrans®. The contrast medium used was barium sulfate.The results of study are presented in illustrations and irrigograms.In conclusion,we can say that Fortrans® provides reliable, effective and simple preparation of patients for irrigography as well as for fast, comfortable and efficient endographic examination (irrigography. The obtained irrigograms are of satisfactory quality, showing sharp contrasts.

  15. Alternatives to FORTRAN in control systems

    International Nuclear Information System (INIS)

    Howell, J.A.; Wright, R.M.

    1985-01-01

    Control system software has traditionally been written in assembly language, FORTRAN, or Basic. Today there exist several high-level languages with features that make them convenient and effective in control systems. These features include bit manipulation, user-defined data types, character manipulation, and high-level logical operations. Some of theses languages are quite different from FORTRAN and yet are easy to read and use. We discuss several languages, their features that make them convenient for control systems, and give examples of their use. We focus particular attention on the language C, developed by Bell Laboratories

  16. Basic linear algebra subprograms for FORTRAN usage

    Science.gov (United States)

    Lawson, C. L.; Hanson, R. J.; Kincaid, D. R.; Krogh, F. T.

    1977-01-01

    A package of 38 low level subprograms for many of the basic operations of numerical linear algebra is presented. The package is intended to be used with FORTRAN. The operations in the package are dot products, elementary vector operations, Givens transformations, vector copy and swap, vector norms, vector scaling, and the indices of components of largest magnitude. The subprograms and a test driver are available in portable FORTRAN. Versions of the subprograms are also provided in assembly language for the IBM 360/67, the CDC 6600 and CDC 7600, and the Univac 1108.

  17. How to Interface Fortran with Matlab

    OpenAIRE

    Sagastizábal , Claudia; Vige , Guillaume

    1995-01-01

    Projet PROMATH; We describe the general procedure for interfacing Fortran routines with Matlab. We explain how to write a mex-file and the associated gateway function. In particular, each different type of argument is considered in detail. We finish with an illustrative example

  18. Pattern recognition in molecular dynamics. [FORTRAN

    Energy Technology Data Exchange (ETDEWEB)

    Zurek, W H; Schieve, W C [Texas Univ., Austin (USA)

    1977-07-01

    An algorithm for the recognition of the formation of bound molecular states in the computer simulation of a dilute gas is presented. Applications to various related problems in physics and chemistry are pointed out. Data structure and decision processes are described. Performance of the FORTRAN program based on the algorithm in cooperation with the molecular dynamics program is described and the results are presented.

  19. High Performance Object-Oriented Scientific Programming in Fortran 90

    Science.gov (United States)

    Norton, Charles D.; Decyk, Viktor K.; Szymanski, Boleslaw K.

    1997-01-01

    We illustrate how Fortran 90 supports object-oriented concepts by example of plasma particle computations on the IBM SP. Our experience shows that Fortran 90 and object-oriented methodology give high performance while providing a bridge from Fortran 77 legacy codes to modern programming principles. All of our object-oriented Fortran 90 codes execute more quickly thatn the equeivalent C++ versions, yet the abstraction modelling capabilities used for scentific programming are comparably powereful.

  20. JLAPACK – Compiling LAPACK FORTRAN to Java

    Directory of Open Access Journals (Sweden)

    David M. Doolin

    1999-01-01

    Full Text Available The JLAPACK project provides the LAPACK numerical subroutines translated from their subset Fortran 77 source into class files, executable by the Java Virtual Machine (JVM and suitable for use by Java programmers. This makes it possible for Java applications or applets, distributed on the World Wide Web (WWW to use established legacy numerical code that was originally written in Fortran. The translation is accomplished using a special purpose Fortran‐to‐Java (source‐to‐source compiler. The LAPACK API will be considerably simplified to take advantage of Java’s object‐oriented design. This report describes the research issues involved in the JLAPACK project, and its current implementation and status.

  1. Programs in Fortran language for reporting the results of the analyses by ICP emission spectroscopy; Programas en lenguaje Fortran para la informacion de los resultados de los analisis efectuados mediante Espectroscopia Optica de emision con fuente de plasma

    Energy Technology Data Exchange (ETDEWEB)

    Roca, M

    1985-07-01

    Three programs, written in FORTRAN IV language, for reporting the results of the analyses by ICP emission spectroscopy from data stored in files on floppy disks have been developed. They are intended, respectively, for the analyses of: 1) waters, 2) granites and slates, and 3) different kinds of geological materials. (Author) 8 refs.

  2. Application of Modern Fortran to Spacecraft Trajectory Design and Optimization

    Science.gov (United States)

    Williams, Jacob; Falck, Robert D.; Beekman, Izaak B.

    2018-01-01

    In this paper, applications of the modern Fortran programming language to the field of spacecraft trajectory optimization and design are examined. Modern object-oriented Fortran has many advantages for scientific programming, although many legacy Fortran aerospace codes have not been upgraded to use the newer standards (or have been rewritten in other languages perceived to be more modern). NASA's Copernicus spacecraft trajectory optimization program, originally a combination of Fortran 77 and Fortran 95, has attempted to keep up with modern standards and makes significant use of the new language features. Various algorithms and methods are presented from trajectory tools such as Copernicus, as well as modern Fortran open source libraries and other projects.

  3. Emulating Multiple Inheritance in Fortran 2003/2008

    Directory of Open Access Journals (Sweden)

    Karla Morris

    2015-01-01

    in Fortran 2003. The design unleashes the power of the associated class relationships for modeling complicated data structures yet avoids the ambiguities that plague some multiple inheritance scenarios.

  4. DISPPAK SUBPAK, MS FORTRAN Extended Subroutine Library

    International Nuclear Information System (INIS)

    Langer, S.

    1991-01-01

    1 - Description of program or function: DISPPAK is a set of routines for use with Microsoft FORTRAN programs that allows the flexible display of information on the screen of an IBM PC in both text and graphics modes. The text mode routines allow the cursor to be placed at an arbitrary point on the screen and text to be displayed at the cursor location, making it possible to create menus and other structured displays. A routine to set the color of the characters that these routines display is also provided. A set of line drawing routines is included for use with IBM's Color Graphics Adapter or an equivalent board (such as the Enhanced Graphics Adapter in CGA emulation mode). These routines support both pixel coordinates and a user-specified set of real number coordinates. SUBPAK is a function library which allows Microsoft FORTRAN programs to calculate random numbers, issue calls to the operating system, read individual characters from the keyboard, perform Boolean and shift operations, and communicate with the I/O ports of the IBM PC. In addition, peek and poke routines, a routine that returns the address of any variable, and routines that can access the system time and date are included. 2 - Method of solution: For the DISPPAK line drawing routines, the user selects a fraction of the screen to use for plotting, chooses the coordinates that refer to the lower-left and upper-right corners, and decides whether the mapping should be linear or logarithmic. Lines are then drawn between endpoints defined in terms of the user coordinate system. Out-of-range coordinates are forced to the border of the window before the line is drawn. 3 - Restrictions on the complexity of the problem: No support is provided for filled areas or text

  5. ARBUS: A FORTRAN tool for generating tree structure diagrams

    International Nuclear Information System (INIS)

    Ferrero, C.; Zanger, M.

    1992-02-01

    The FORTRAN77 stand-alone code ARBUS has been designed to aid the user by providing a tree structure diagram generating utility for computer programs written in FORTRAN language. This report is intended to describe the main purpose and features of ARBUS and to highlight some additional applications of the code by means of practical test cases. (orig.) [de

  6. Object-Oriented Scientific Programming with Fortran 90

    Science.gov (United States)

    Norton, C.

    1998-01-01

    Fortran 90 is a modern language that introduces many important new features beneficial for scientific programming. We discuss our experiences in plasma particle simulation and unstructured adaptive mesh refinement on supercomputers, illustrating the features of Fortran 90 that support the object-oriented methodology.

  7. The Fortran-P Translator: Towards Automatic Translation of Fortran 77 Programs for Massively Parallel Processors

    Directory of Open Access Journals (Sweden)

    Matthew O'keefe

    1995-01-01

    Full Text Available Massively parallel processors (MPPs hold the promise of extremely high performance that, if realized, could be used to study problems of unprecedented size and complexity. One of the primary stumbling blocks to this promise has been the lack of tools to translate application codes to MPP form. In this article we show how applications codes written in a subset of Fortran 77, called Fortran-P, can be translated to achieve good performance on several massively parallel machines. This subset can express codes that are self-similar, where the algorithm applied to the global data domain is also applied to each subdomain. We have found many codes that match the Fortran-P programming style and have converted them using our tools. We believe a self-similar coding style will accomplish what a vectorizable style has accomplished for vector machines by allowing the construction of robust, user-friendly, automatic translation systems that increase programmer productivity and generate fast, efficient code for MPPs.

  8. FORTRAN program for calculating liquid-phase and gas-phase thermal diffusion column coefficients

    International Nuclear Information System (INIS)

    Rutherford, W.M.

    1980-01-01

    A computer program (COLCO) was developed for calculating thermal diffusion column coefficients from theory. The program, which is written in FORTRAN IV, can be used for both liquid-phase and gas-phase thermal diffusion columns. Column coefficients for the gas phase can be based on gas properties calculated from kinetic theory using tables of omega integrals or on tables of compiled physical properties as functions of temperature. Column coefficients for the liquid phase can be based on compiled physical property tables. Program listings, test data, sample output, and users manual are supplied for appendices

  9. Portable parallel programming in a Fortran environment

    International Nuclear Information System (INIS)

    May, E.N.

    1989-01-01

    Experience using the Argonne-developed PARMACs macro package to implement a portable parallel programming environment is described. Fortran programs with intrinsic parallelism of coarse and medium granularity are easily converted to parallel programs which are portable among a number of commercially available parallel processors in the class of shared-memory bus-based and local-memory network based MIMD processors. The parallelism is implemented using standard UNIX (tm) tools and a small number of easily understood synchronization concepts (monitors and message-passing techniques) to construct and coordinate multiple cooperating processes on one or many processors. Benchmark results are presented for parallel computers such as the Alliant FX/8, the Encore MultiMax, the Sequent Balance, the Intel iPSC/2 Hypercube and a network of Sun 3 workstations. These parallel machines are typical MIMD types with from 8 to 30 processors, each rated at from 1 to 10 MIPS processing power. The demonstration code used for this work is a Monte Carlo simulation of the response to photons of a ''nearly realistic'' lead, iron and plastic electromagnetic and hadronic calorimeter, using the EGS4 code system. 6 refs., 2 figs., 2 tabs

  10. Types: A data abstraction package in FORTRAN

    International Nuclear Information System (INIS)

    Youssef, S.

    1990-01-01

    TYPES is a collection of Fortran programs which allow the creation and manipulation of abstract ''data objects'' without the need for a preprocessor. Each data object is assigned a ''type'' as it is created which implies participation in a set of characteristic operations. Available types include scalars, logicals, ordered sets, stacks, queues, sequences, trees, arrays, character strings, block text, histograms, virtual and allocatable memories. A data object may contain integers, reals, or other data objects in any combination. In addition to the type specific operations, a set of universal utilities allows for copying input/output to disk, naming, editing, displaying, user input, interactive creation, tests for equality of contents or structure, machine to machine translation or source code creation for and data object. TYPES is available on VAX/VMS, SUN 3, SPARC, DEC/Ultrix, Silicon Graphics 4D and Cray/Unicos machines. The capabilities of the package are discussed together with characteristic applications and experience in writing the GVerify package

  11. FASTPLOT, Interface Routines to MS FORTRAN Graphics Library

    International Nuclear Information System (INIS)

    1999-01-01

    1 - Description of program or function: FASTPLOT is a library of routines that can be used to interface with the Microsoft FORTRAN Graphics library (GRAPHICS.LIB). The FASTPLOT routines simplify the development of graphics applications and add capabilities such as histograms, Splines, symbols, and error bars. FASTPLOT also includes routines that can be used to create menus. 2 - Methods: FASTPLOT is a library of routines which must be linked with a user's FORTRAN programs that call any FASTPLOT routines. In addition, the user must link with the Microsoft FORTRAN Graphics library (GRAPHICS.LIB). 3 - Restrictions on the complexity of the problem: None noted

  12. MORTRAN-2, FORTRAN Language Extension with User-Supplied Macros

    International Nuclear Information System (INIS)

    Cook, A. James; Shustek, L.J.

    1980-01-01

    1 - Description of problem or function: MORTRAN2 is a FORTRAN language extension that permits a relatively easy transition from FORTRAN to a more convenient and structured language. Its features include free-field format; alphanumeric statement labels; flexible comment convention; nested block structure; for-by-to, do, while, until, loop, if-then-else, if-else, exit, and next statements; multiple assignment statements; conditional compilation; and automatic listing indentation. The language is implemented by a macro-based pre-processor and is further extensible by user-defined macros. 2 - Method of solution: The MORTRAN2 pre-processor may be regarded as a compiler whose object code is ANSI Standard FORTRAN. The MORTRAN2 language is dynamically defined by macros which are input at each use of the pre-processor. 3 - Restrictions on the complexity of the problem: The pre-processor output must be accepted by a FORTRAN compiler

  13. Programação orientada a objetos em FORTRAN

    OpenAIRE

    Beck, André Teófilo; Bazán, Felipe Alexander Vargas

    2011-01-01

    Este artigo apresenta conceitos fundamentais de programação orientada a objetos (OO) em FORTRAN. Em geral, os usuários de FORTRAN não estão familiarizados com estes conceitos, pois os compiladores desta linguagem não possuíam suporte para programação OO até o recente lançamento da versão 11.1 do compilador Intel Visual FORTRAN. Este compilador suporta a maioria das características de orientação a objetos do padrão FORTRAN 2003, permitindo a atualização de práticas de programaçã...

  14. IFF, Full-Screen Input Menu Generator for FORTRAN Program

    International Nuclear Information System (INIS)

    Seidl, Albert

    1991-01-01

    1 - Description of program or function: The IFF-package contains input modules for use within FORTRAN programs. This package enables the programmer to easily include interactive menu-directed data input (module VTMEN1) and command-word processing (module INPCOM) into a FORTRAN program. 2 - Method of solution: No mathematical operations are performed. 3 - Restrictions on the complexity of the problem: Certain restrictions of use may arise from the dimensioning of arrays. Field lengths are defined via PARAMETER-statements

  15. Classical Fortran programming for engineering and scientific applications

    CERN Document Server

    Kupferschmid, Michael

    2009-01-01

    IntroductionWhy Study Programming?The Evolution of FORTRANWhy Study FORTRAN?Classical FORTRANAbout This BookAdvice to InstructorsAbout the AuthorAcknowledgmentsDisclaimersHello, World!Case Study: A First FORTRAN ProgramCompiling the ProgramRunning a Program in UNIXOmissionsExpressions and Assignment StatementsConstantsVariables and Variable NamesArithmetic OperatorsFunction ReferencesExpressionsA

  16. Comparison of and conversion between different implementations of the FORTRAN programming language

    Science.gov (United States)

    Treinish, L.

    1980-01-01

    A guideline for computer programmers who may need to exchange FORTRAN programs between several computers is presented. The characteristics of the FORTRAN language available on three different types of computers are outlined, and procedures and other considerations for the transfer of programs from one type of FORTRAN to another are discussed. In addition, the variance of these different FORTRAN's from the FORTRAN 77 standard are discussed.

  17. Aspects of FORTRAN in large-scale programming

    International Nuclear Information System (INIS)

    Metcalf, M.

    1983-01-01

    In these two lectures I examine the following three questions: i) Why did high-energy physicists begin to use FORTRAN. ii) Why do high-energy physicists continue to use FORTRAN. iii) Will high-energy physicists always use FORTRAN. In order to find answers to these questions, it is necessary to look at the history of the language, its present position, and its likely future, and also to consider its manner of use, the topic of portability, and the competition from other languages. Here we think especially of early competition from ALGOL, the more recent spread in the use of PASCAL, and the appearance of a completely new and ambitious language, ADA. (orig.)

  18. Introduction to modern Fortran for the Earth system sciences

    CERN Document Server

    Chirila, Dragos B

    2014-01-01

    This work provides a short "getting started" guide to Fortran 90/95. The main target audience consists of newcomers to the field of numerical computation within Earth system sciences (students, researchers or scientific programmers). Furthermore, readers accustomed to other programming languages may also benefit from this work, by discovering how some programming techniques they are familiar with map to Fortran 95. The main goal is to enable readers to quickly start using Fortran 95 for writing useful programs. It also introduces a gradual discussion of Input/Output facilities relevant for Earth system sciences, from the simplest ones to the more advanced netCDF library (which has become a de facto standard for handling the massive datasets used within Earth system sciences). While related works already treat these disciplines separately (each often providing much more information than needed by the beginning practitioner), the reader finds in this book a shorter guide which links them. Compared to other book...

  19. Aspects of FORTRAN in large-scale programming

    CERN Document Server

    Metcalf, M

    1983-01-01

    In these two lectures I shall try to examine the following three questions: i) Why did high-energy physicists begin to use FORTRAN? ii) Why do high-energy physicists continue to use FORTRAN? iii) Will high-energy physicists always use FORTRAN? In order to find answers to these questions, it is necessary to look at the history of the language, its present position, and its likely future, and also to consider its manner of use, the topic of portability, and the competition from other languages. Here we think especially of early competition from ALGOL, the more recent spread in the use of PASCAL, and the appearance of a completely new and ambitious language, ADA.

  20. Numerical methods of mathematical optimization with Algol and Fortran programs

    CERN Document Server

    Künzi, Hans P; Zehnder, C A; Rheinboldt, Werner

    1971-01-01

    Numerical Methods of Mathematical Optimization: With ALGOL and FORTRAN Programs reviews the theory and the practical application of the numerical methods of mathematical optimization. An ALGOL and a FORTRAN program was developed for each one of the algorithms described in the theoretical section. This should result in easy access to the application of the different optimization methods.Comprised of four chapters, this volume begins with a discussion on the theory of linear and nonlinear optimization, with the main stress on an easily understood, mathematically precise presentation. In addition

  1. Cloudy's Journey from FORTRAN to C, Why and How

    Science.gov (United States)

    Ferland, G. J.

    Cloudy is a large-scale plasma simulation code that is widely used across the astronomical community as an aid in the interpretation of spectroscopic data. The cover of the ADAS VI book featured predictions of the code. The FORTRAN 77 source code has always been freely available on the Internet, contributing to its widespread use. The coming of PCs and Linux has fundamentally changed the computing environment. Modern Fortran compilers (F90 and F95) are not freely available. A common-use code must be written in either FORTRAN 77 or C to be Open Source/GNU/Linux friendly. F77 has serious drawbacks - modern language constructs cannot be used, students do not have skills in this language, and it does not contribute to their future employability. It became clear that the code would have to be ported to C to have a viable future. I describe the approach I used to convert Cloudy from FORTRAN 77 with MILSPEC extensions to ANSI/ISO 89 C. Cloudy is now openly available as a C code, and will evolve to C++ as gcc and standard C++ mature. Cloudy looks to a bright future with a modern language.

  2. Numerical integration subprogrammes in Fortran II-D

    Energy Technology Data Exchange (ETDEWEB)

    Fry, C. R.

    1966-12-15

    This note briefly describes some integration subprogrammes written in FORTRAN II-D for the IBM 1620-II at CARDE. These presented are two Newton-Cotes, Chebyshev polynomial summation, Filon's, Nordsieck's and optimum Runge-Kutta and predictor-corrector methods. A few miscellaneous numerical integration procedures are also mentioned covering statistical functions, oscillating integrands and functions occurring in electrical engineering.

  3. Multidimentional and Multi-Parameter Fortran-Based Curve Fitting ...

    African Journals Online (AJOL)

    This work briefly describes the mathematics behind the algorithm, and also elaborates how to implement it using FORTRAN 95 programming language. The advantage of this algorithm, when it is extended to surfaces and complex functions, is that it makes researchers to have a better trust during fitting. It also improves the ...

  4. An Introduction to Fortran Programming: An IPI Approach.

    Science.gov (United States)

    Fisher, D. D.; And Others

    This text is designed to give individually paced instruction in Fortran Programing. The text contains fifteen units. Unit titles include: Flowcharts, Input and Output, Loops, and Debugging. Also included is an extensive set of appendices. These were designed to contain a great deal of practical information necessary to the course. These appendices…

  5. RODDRP - A FORTRAN program for use in control rod calibration by the rod drop method

    International Nuclear Information System (INIS)

    Wilson, W.E.

    1972-01-01

    The different methods to measure reactivity which are applicable to control rod calibration are discussed. They include: 1) the positive period method, 2) the rod drop method, 3) the source-jerk method, 4) the rod oscillation method, and 5) the pulsed neutron method. The instrument setup used at WSU for rod drop measurements is presented. To speed up the analysis of power fall-off trace, a FORTRAN IV program called RODDRP was written to simultaneously solve the in-hour equation and relative neutron flux. The procedure for calculating the worth of the rod that produced the power trace is given. The reactivity for each time relative flux point is obtained. Conclusions about the status of the equipment are made

  6. GRESS, FORTRAN Pre-compiler with Differentiation Enhancement

    International Nuclear Information System (INIS)

    1999-01-01

    1 - Description of program or function: The GRESS FORTRAN pre-compiler (SYMG) and run-time library are used to enhance conventional FORTRAN-77 programs with analytic differentiation of arithmetic statements for automatic differentiation in either forward or reverse mode. GRESS 3.0 is functionally equivalent to GRESS 2.1. GRESS 2.1 is an improved and updated version of the previous released GRESS 1.1. Improvements in the implementation of a the CHAIN option have resulted in a 70 to 85% reduction in execution time and up to a 50% reduction in memory required for forward chaining applications. 2 - Method of solution: GRESS uses a pre-compiler to analyze FORTRAN statements and determine the mathematical operations embodied in them. As each arithmetic assignment statement in a program is analyzed, SYMG generates the partial derivatives of the term on the left with respect to each floating-point variable on the right. The result of the pre-compilation step is a new FORTRAN program that can produce derivatives for any REAL (i.e., single or double precision) variable calculated by the model. Consequently, GRESS enhances FORTRAN programs or subprograms by adding the calculation of derivatives along with the original output. Derivatives from a GRESS enhanced model can be used internally (e.g., iteration acceleration) or externally (e.g., sensitivity studies). By calling GRESS run-time routines, derivatives can be propagated through the code via the chain rule (referred to as the CHAIN option) or accumulated to create an adjoint matrix (referred to as the ADGEN option). A third option, GENSUB, makes it possible to process a subset of a program (i.e., a do loop, subroutine, function, a sequence of subroutines, or a whole program) for calculating derivatives of dependent variables with respect to independent variables. A code enhanced with the GENSUB option can use forward mode, reverse mode, or a hybrid of the two modes. 3 - Restrictions on the complexity of the problem: GRESS

  7. Interactive FORTRAN IV computer programs for the thermodynamic and transport properties of selected cryogens (fluids pack)

    Science.gov (United States)

    Mccarty, R. D.

    1980-01-01

    The thermodynamic and transport properties of selected cryogens had programmed into a series of computer routines. Input variables are any two of P, rho or T in the single phase regions and either P or T for the saturated liquid or vapor state. The output is pressure, density, temperature, entropy, enthalpy for all of the fluids and in most cases specific heat capacity and speed of sound. Viscosity and thermal conductivity are also given for most of the fluids. The programs are designed for access by remote terminal; however, they have been written in a modular form to allow the user to select either specific fluids or specific properties for particular needs. The program includes properties for hydrogen, helium, neon, nitrogen, oxygen, argon, and methane. The programs include properties for gaseous and liquid states usually from the triple point to some upper limit of pressure and temperature which varies from fluid to fluid.

  8. ZONE: a finite element mesh generator. [In FORTRAN IV for CDC 7600

    Energy Technology Data Exchange (ETDEWEB)

    Burger, M. J.

    1976-05-01

    The ZONE computer program is a finite-element mesh generator which produces the nodes and element description of any two-dimensional geometry. The geometry is subdivided into a mesh of quadrilateral and triangular zones arranged sequentially in an ordered march through the geometry. The order of march can be chosen so that the minimum bandwidth is obtained. The node points are defined in terms of the x and y coordinates in a global rectangular coordinate system. The zones generated are quadrilaterals or triangles defined by four node points in a counterclockwise sequence. Node points defining the outside boundary are generated to describe pressure boundary conditions. The mesh that is generated can be used as input to any two-dimensional as well as any axisymmetrical structure program. The output from ZONE is essentially the input file to NAOS, HONDO, and other axisymmetric finite element programs. 14 figures. (RWR)

  9. User manual for two simple postscript output FORTRAN plotting routines

    Science.gov (United States)

    Nguyen, T. X.

    1991-01-01

    Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

  10. A FORTRAN program for a least-square fitting

    International Nuclear Information System (INIS)

    Yamazaki, Tetsuo

    1978-01-01

    A practical FORTRAN program for a least-squares fitting is presented. Although the method is quite usual, the program calculates not only the most satisfactory set of values of unknowns but also the plausible errors associated with them. As an example, a measured lateral absorbed-dose distribution in water for a narrow 25-MeV electron beam is fitted to a Gaussian distribution. (auth.)

  11. A Fortran Program for Deep Space Sensor Analysis.

    Science.gov (United States)

    1984-12-14

    used to help p maintain currency to the deep space satellite catelog? Research Question Can a Fortran program be designed to evaluate the effectiveness ...Range ( AFETR ) Range p Measurements Laboratory (RML) is located in Malibar, .- Florida. Like GEODSS, Malibar uses a 48 inch telescope with a...phased out. This mode will evaluate the effect of the loss of the 3 Baker-Nunn sites to mode 3 Mode 5 through Mode 8 Modes 5 through 8 are identical to

  12. An environment for parallel structuring of Fortran programs

    International Nuclear Information System (INIS)

    Sridharan, K.; McShea, M.; Denton, C.; Eventoff, B.; Browne, J.C.; Newton, P.; Ellis, M.; Grossbard, D.; Wise, T.; Clemmer, D.

    1990-01-01

    The paper describes and illustrates an environment for interactive support of the detection and implementation of macro-level parallelism in Fortran programs. The approach couples algorithms for dependence analysis with both innovative techniques for complexity management and capabilities for the measurement and analysis of the parallel computation structures generated through use of the environment. The resulting environment is complementary to the more common approach of seeking local parallelism by loop unrolling, either by an automatic compiler or manually. (orig.)

  13. MAPLIB, Thermodynamics Materials Property Generator for FORTRAN Program

    International Nuclear Information System (INIS)

    Schumann, U.; Zimmerer, W. and others

    1978-01-01

    1 - Nature of physical problem solved: MAPLIB is a program system which is able to incorporate the values of the properties of any material in a form suitable for use in other computer programs. The data are implemented in FORTRAN functions. A utility program is provided to assist in library management. 2 - Method of solution: MAPLIB consists of the following parts: 1) Conventions for the data format. 2) Some integrated data. 3) A data access system (FORTRAN subroutine). 4) An utility program for updating and documentation of the actual library content. The central part is a set of FORTRAN functions, e.g. WL H2O v(t,p) (heat conduction of water vapor as a function of temperature and pressure), which compute the required data and which can be called by the user program. The data content of MAPLIB has been delivered by many persons. There was no systematic evaluation of the material. It is the responsibility of every user to check the data for physical accuracy. MAPLIB only serves as a library system for manipulation and storing of such data. 3 - Restrictions on the complexity of the problem: a) See responsibility as explained above. b) Up to 1000 data functions could be implemented. c) If too many data functions are included in MAPLIB, the storage requirements become excessive for application in users programs

  14. DTK C/Fortran Interface Development for NEAMS FSI Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Slattery, Stuart R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lebrun-Grandie, Damien T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-09-19

    This report documents the development of DataTransferKit (DTK) C and Fortran interfaces for fluid-structure-interaction (FSI) simulations in NEAMS. In these simulations, the codes Nek5000 and Diablo are being coupled within the SHARP framework to study flow-induced vibration (FIV) in reactor steam generators. We will review the current Nek5000/Diablo coupling algorithm in SHARP and the current state of the solution transfer scheme used in this implementation. We will then present existing DTK algorithms which may be used instead to provide an improvement in both flexibility and scalability of the current SHARP implementation. We will show how these can be used within the current FSI scheme using a new set of interfaces to the algorithms developed by this work. These new interfaces currently expose the mesh-free solution transfer algorithms in DTK, a C++ library, and are written in C and Fortran to enable coupling of both Nek5000 and Diablo in their native Fortran language. They have been compiled and tested on Cooley, the test-bed machine for Mira at ALCF.

  15. Automatic generation of Fortran programs for algebraic simulation models

    International Nuclear Information System (INIS)

    Schopf, W.; Rexer, G.; Ruehle, R.

    1978-04-01

    This report documents a generator program by which econometric simulation models formulated in an application-orientated language can be transformed automatically in a Fortran program. Thus the model designer is able to build up, test and modify models without the need of a Fortran programmer. The development of a computer model is therefore simplified and shortened appreciably; in chapter 1-3 of this report all rules are presented for the application of the generator to the model design. Algebraic models including exogeneous and endogeneous time series variables, lead and lag function can be generated. In addition, to these language elements, Fortran sequences can be applied to the formulation of models in the case of complex model interrelations. Automatically the generated model is a module of the program system RSYST III and is therefore able to exchange input and output data with the central data bank of the system and in connection with the method library modules can be used to handle planning problems. (orig.) [de

  16. Fortran interface layer of the framework for developing particle simulator FDPS

    Science.gov (United States)

    Namekata, Daisuke; Iwasawa, Masaki; Nitadori, Keigo; Tanikawa, Ataru; Muranushi, Takayuki; Wang, Long; Hosono, Natsuki; Nomura, Kentaro; Makino, Junichiro

    2018-06-01

    Numerical simulations based on particle methods have been widely used in various fields including astrophysics. To date, various versions of simulation software have been developed by individual researchers or research groups in each field, through a huge amount of time and effort, even though the numerical algorithms used are very similar. To improve the situation, we have developed a framework, called FDPS (Framework for Developing Particle Simulators), which enables researchers to develop massively parallel particle simulation codes for arbitrary particle methods easily. Until version 3.0, FDPS provided an API (application programming interface) for the C++ programming language only. This limitation comes from the fact that FDPS is developed using the template feature in C++, which is essential to support arbitrary data types of particle. However, there are many researchers who use Fortran to develop their codes. Thus, the previous versions of FDPS require such people to invest much time to learn C++. This is inefficient. To cope with this problem, we developed a Fortran interface layer in FDPS, which provides API for Fortran. In order to support arbitrary data types of particle in Fortran, we design the Fortran interface layer as follows. Based on a given derived data type in Fortran representing particle, a PYTHON script provided by us automatically generates a library that manipulates the C++ core part of FDPS. This library is seen as a Fortran module providing an API of FDPS from the Fortran side and uses C programs internally to interoperate Fortran with C++. In this way, we have overcome several technical issues when emulating a `template' in Fortran. Using the Fortran interface, users can develop all parts of their codes in Fortran. We show that the overhead of the Fortran interface part is sufficiently small and a code written in Fortran shows a performance practically identical to the one written in C++.

  17. Numerical computation of molecular integrals via optimized (vectorized) FORTRAN code

    International Nuclear Information System (INIS)

    Scott, T.C.; Grant, I.P.; Saunders, V.R.

    1997-01-01

    The calculation of molecular properties based on quantum mechanics is an area of fundamental research whose horizons have always been determined by the power of state-of-the-art computers. A computational bottleneck is the numerical calculation of the required molecular integrals to sufficient precision. Herein, we present a method for the rapid numerical evaluation of molecular integrals using optimized FORTRAN code generated by Maple. The method is based on the exploitation of common intermediates and the optimization can be adjusted to both serial and vectorized computations. (orig.)

  18. A FORTRAN realization of the block adjustment of CCD frames

    Science.gov (United States)

    Yu, Yong; Tang, Zhenghong; Li, Jinling; Zhao, Ming

    A FORTRAN version realization of the block adjustment (BA) of overlapping CCD frames is developed. The flowchart is introduced including (a) data collection, (b) preprocessing, and (c) BA and object positioning. The subroutines and their functions are also demonstrated. The program package is tested by simulated data with/without the application of white noises. It is also preliminarily applied to the reduction of optical positions of four extragalactic radio sources. The results show that because of the increase in the sky coverage and number of reference stars, the precision of deducted positions is improved compared with single plate adjustment.

  19. The FORTRAN-77 version of the Karlsruhe program system KAPROS

    International Nuclear Information System (INIS)

    Moritz, N.

    1985-02-01

    The FORTRAN-77 KAPROS-kernel includes some major changes compared with the version, which is described in the KfK-report 2254. The changes are documented in this report from the point of view of the system-programmer. This report is meant to be a supplement to the KfK-report 2254, assuming that the reader of this report is familiar with the KfK-report 2254. He also should be familiar with the IBM operating system MVS SP1.3.2 and the usual terms of data processing. (orig.) [de

  20. IMAGEP - A FORTRAN ALGORITHM FOR DIGITAL IMAGE PROCESSING

    Science.gov (United States)

    Roth, D. J.

    1994-01-01

    IMAGEP is a FORTRAN computer algorithm containing various image processing, analysis, and enhancement functions. It is a keyboard-driven program organized into nine subroutines. Within the subroutines are other routines, also, selected via keyboard. Some of the functions performed by IMAGEP include digitization, storage and retrieval of images; image enhancement by contrast expansion, addition and subtraction, magnification, inversion, and bit shifting; display and movement of cursor; display of grey level histogram of image; and display of the variation of grey level intensity as a function of image position. This algorithm has possible scientific, industrial, and biomedical applications in material flaw studies, steel and ore analysis, and pathology, respectively. IMAGEP is written in VAX FORTRAN for DEC VAX series computers running VMS. The program requires the use of a Grinnell 274 image processor which can be obtained from Mark McCloud Associates, Campbell, CA. An object library of the required GMR series software is included on the distribution media. IMAGEP requires 1Mb of RAM for execution. The standard distribution medium for this program is a 1600 BPI 9track magnetic tape in VAX FILES-11 format. It is also available on a TK50 tape cartridge in VAX FILES-11 format. This program was developed in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation.

  1. Exploiting first-class arrays in Fortran for accelerator programming

    International Nuclear Information System (INIS)

    Rasmussen, Craig E.; Weseloh, Wayne N.; Robey, Robert W.; Sottile, Matthew J.; Quinlan, Daniel; Overbey, Jeffrey

    2010-01-01

    Emerging architectures for high performance computing often are well suited to a data parallel programming model. This paper presents a simple programming methodology based on existing languages and compiler tools that allows programmers to take advantage of these systems. We will work with the array features of Fortran 90 to show how this infrequently exploited, standardized language feature is easily transformed to lower level accelerator code. Our transformations are based on a mapping from Fortran 90 to C++ code with OpenCL extensions. The sheer complexity of programming for clusters of many or multi-core processors with tens of millions threads of execution make the simplicity of the data parallel model attractive. Furthermore, the increasing complexity of todays applications (especially when convolved with the increasing complexity of the hardware) and the need for portability across hardware architectures make a higher-level and simpler programming model like data parallel attractive. The goal of this work has been to exploit source-to-source transformations that allow programmers to develop and maintain programs at a high-level of abstraction, without coding to a specific hardware architecture. Furthermore these transformations allow multiple hardware architectures to be targeted without changing the high-level source. It also removes the necessity for application programmers to understand details of the accelerator architecture or to know OpenCL.

  2. Computer applications in physics with FORTRAN, BASIC and C

    CERN Document Server

    Chandra, Suresh

    2014-01-01

    Because of encouraging response for first two editions of the book and for taking into account valuable suggestion from teachers as well as students, the text for Interpolation, Differentiation, Integration, Roots of an Equation, Solution of Simultaneous Equations, Eigenvalues and Eigenvectors of Matrix, Solution of Differential Equations, Solution of Partial Differential Equations, Monte Carlo Method and Simulation, Computation of some Functions is improved throughout and presented in a more systematic manner by using simple language. These techniques have vast applications in Science, Engineering and Technology. The C language is becoming popular in universities, colleges and engineering institutions. Besides the C language, programs are written in FORTRAN and BASIC languages. Consequently, this book has rather wide scope for its use. Each of the topics are developed in a systematic manner; thus making this book useful for graduate, postgraduate and engineering students. KEY FEATURES: Each topic is self exp...

  3. Fortran programs for the time-dependent Gross-Pitaevskii equation in a fully anisotropic trap

    Science.gov (United States)

    Muruganandam, P.; Adhikari, S. K.

    2009-10-01

    Here we develop simple numerical algorithms for both stationary and non-stationary solutions of the time-dependent Gross-Pitaevskii (GP) equation describing the properties of Bose-Einstein condensates at ultra low temperatures. In particular, we consider algorithms involving real- and imaginary-time propagation based on a split-step Crank-Nicolson method. In a one-space-variable form of the GP equation we consider the one-dimensional, two-dimensional circularly-symmetric, and the three-dimensional spherically-symmetric harmonic-oscillator traps. In the two-space-variable form we consider the GP equation in two-dimensional anisotropic and three-dimensional axially-symmetric traps. The fully-anisotropic three-dimensional GP equation is also considered. Numerical results for the chemical potential and root-mean-square size of stationary states are reported using imaginary-time propagation programs for all the cases and compared with previously obtained results. Also presented are numerical results of non-stationary oscillation for different trap symmetries using real-time propagation programs. A set of convenient working codes developed in Fortran 77 are also provided for all these cases (twelve programs in all). In the case of two or three space variables, Fortran 90/95 versions provide some simplification over the Fortran 77 programs, and these programs are also included (six programs in all). Program summaryProgram title: (i) imagetime1d, (ii) imagetime2d, (iii) imagetime3d, (iv) imagetimecir, (v) imagetimesph, (vi) imagetimeaxial, (vii) realtime1d, (viii) realtime2d, (ix) realtime3d, (x) realtimecir, (xi) realtimesph, (xii) realtimeaxial Catalogue identifier: AEDU_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDU_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data

  4. MULTITASKER, Multitasking Kernel for C and FORTRAN Under UNIX

    International Nuclear Information System (INIS)

    Brooks, E.D. III

    1988-01-01

    1 - Description of program or function: MULTITASKER implements a multitasking kernel for the C and FORTRAN programming languages that runs under UNIX. The kernel provides a multitasking environment which serves two purposes. The first is to provide an efficient portable environment for the development, debugging, and execution of production multiprocessor programs. The second is to provide a means of evaluating the performance of a multitasking program on model multiprocessor hardware. The performance evaluation features require no changes in the application program source and are implemented as a set of compile- and run-time options in the kernel. 2 - Method of solution: The FORTRAN interface to the kernel is identical in function to the CRI multitasking package provided for the Cray XMP. This provides a migration path to high speed (but small N) multiprocessors once the application has been coded and debugged. With use of the UNIX m4 macro preprocessor, source compatibility can be achieved between the UNIX code development system and the target Cray multiprocessor. The kernel also provides a means of evaluating a program's performance on model multiprocessors. Execution traces may be obtained which allow the user to determine kernel overhead, memory conflicts between various tasks, and the average concurrency being exploited. The kernel may also be made to switch tasks every cpu instruction with a random execution ordering. This allows the user to look for unprotected critical regions in the program. These features, implemented as a set of compile- and run-time options, cause extra execution overhead which is not present in the standard production version of the kernel

  5. IVS Organization

    Science.gov (United States)

    2004-01-01

    International VLBI Service (IVS) is an international collaboration of organizations which operate or support Very Long Baseline Interferometry (VLBI) components. The goals are: To provide a service to support geodetic, geophysical and astrometric research and operational activities. To promote research and development activities in all aspects of the geodetic and astrometric VLBI technique. To interact with the community of users of VLBI products and to integrate VLBI into a global Earth observing system.

  6. Nonalgebraic symbol manipulators for use in scientific and engineering modeling: introducing the FORSE (FORtran Symobol Expander)

    International Nuclear Information System (INIS)

    Schultz, J.H.; Lettvin, J.D.

    1982-02-01

    A system of nonalgebraic symbol manipulators, called The FORSE (FORtran Symbol Expanders) has been developed to document and prepare input-output for Fortran programs. The use of documentation at the level of the individual equation is defended. The operation of The FORSE is described, along with user instructions and a worked example

  7. Development of the static analyzer ANALYSIS/EX for FORTRAN programs

    International Nuclear Information System (INIS)

    Osanai, Seiji; Yokokawa, Mitsuo

    1993-08-01

    The static analyzer 'ANALYSIS' is the software tool for analyzing tree structure and COMMON regions of a FORTRAN program statically. With the installation of the new FORTRAN compiler, FORTRAN77EX(V12), to the computer system at JAERI, a new version of ANALYSIS, 'ANALYSIS/EX', has been developed to enhance its analyzing functions. In addition to the conventional functions of ANALYSIS, the ANALYSIS/EX is capable of analyzing of FORTRAN programs written in the FORTRAN77EX(V12) language grammar such as large-scale nuclear codes. The analyzing function of COMMON regions are also improved so as to obtain the relation between variables in COMMON regions in more detail. In this report, results of improvement and enhanced functions of the static analyzer ANALYSIS/EX are presented. (author)

  8. GKS-EZ programming manual for FORTRAN-77

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R.C.

    1992-01-01

    A standard has now been adopted for subroutine packages that drive graphic devices. It is known as the Graphical Kernel system (GKS), and many commercial implementations of it are available. Unfortunately, it is a difficult system to learn, and certain functions that are important for scientific use are not provided. Although GKS can be used to achieve portability of graphic applications between graphic devices, computers, and operating systems, it can also be misused in this respect. In addition, it introduces the very real problem of portability between the various implementations of GKS. This document describes a set of FORTRAN-77 subroutines that may be used to control a wide variety of graphic devices and overcome most of these problems. Some of these subroutines are from GKS itself, while others are higher-level subroutines that call GKS subroutines. These subroutines are collectively known as GKS-EZ. The purpose is to supply someone who is not a specialist in computer graphics with a flexible, robust, and easy to learn graphics system. Users of GKS-EZ should not have much need for a full GKS manual; this document will supply all of the information to use GKS-EZ except for a few items. These missing items include the numeric identification of the supported graphic devices and the procedure for linking the GKS subroutines into a executable module.

  9. SPECFUN1, Portable Special FORTRAN Routines with Test Drivers

    International Nuclear Information System (INIS)

    Cody, W.J.

    1993-01-01

    1 - Description of program or function: SPECFUN is a collection of transportable FORTRAN subroutines and test drivers to evaluate certain special functions. The individual subroutines are - Name/Description: ALGAMA: Log gamma function, DAW: Dawson's integral, EI: Exponential integrals, ERF: Error function, ERFC: Complementary error function, GAMMA: Gamma function, I0: Bessel function I-sub-0, I1: Bessel function I-sub-1, J0Y0: Bessel functions J-sub-0 and Y-sub-0, J1Y1: Bessel functions J-sub-1 and Y-sub-1, K0: Bessel function K-sub-0, K1: Bessel function K-sub-1, PSI: Logarithmic derivative of the gamma function, REN: Random number generator, RIBESL: Bessel function I-sub-(N,ALPHA), RJBESL: Bessel function J-sub-(N,ALPHA), RKBESL: Bessel function K-sub-(N,ALPHA), RYBESL: Bessel function Y-sub-(N,ALPHA), MACHAR: Machine-dependent constants. 2 - Method of solution: SPECFUN generally uses rational mini-max approximations for functions of one variable and recurrence relations for functions of two or more variables. 3 - Restrictions on the complexity of the problem: Accuracy is targeted at between 18 and 20 significant decimal digits

  10. VIDEO-PC, SVGA Routines for FORTRAN on PC

    International Nuclear Information System (INIS)

    1994-01-01

    1 - Description of program or function: These primitives are the lowest level routines needed to perform super VGA graphics on a PC. A sample main program is included that exercises the primitives. Both Lahey and Microsoft FORTRAN's have graphics libraries. However, the libraries do not support 256 color graphics at resolutions greater than 320x200. The primitives bypass these libraries while still conforming to standard usage of BIOS. The supported graphics modes depend upon the PC graphics card and its memory. Super VGA resolutions of 640x480 and 800x600 have been tested on an ATI VGA Wonder card with 512 K memory and on several 80486 PC's (unknown manufacturers) at retail stores. 2 - Method of solution: Both Lahey and Microsoft primitives depend upon sending the correct parameters to the PC BIOS (basic input output system) as discussed in the references. 3 - Restrictions on the complexity of the problem: The primitives were developed for 256 color VGA applications. It is known, for instance, that some CGA and 16 color VGA video modes will not operate correctly using these primitives. Potential users should try the test program on their PC/video card combination to determine applicability

  11. RELABEL2007, Labels FORTRAN Statements in ENDF Format Processing Programs

    International Nuclear Information System (INIS)

    2007-01-01

    1 - Description of program or function: RELABEL labels a ENDF/B pre-processing program so that statement labels are in increasing order in increments of 10 within each routine, and cards are identified in columns 73-80 by three alphanumeric characters in columns 73-75 and sequence numbers in columns 76-80 in increments of 10. IAEA1314/10: This version include the updates up to January 30, 2007. Changes in ENDF/B-VII Format and procedures, as well as the evaluations themselves, make it impossible for versions of the ENDF/B pre-processing codes earlier than PREPRO 2007 (2007 Version) to accurately process current ENDF/B-VII evaluations. The present code can handle all existing ENDF/B-VI evaluations through release 8, which will be the last release of ENDF/B-VI. Modifications from previous versions: Relabel VERS. 2007-1 (JAN. 2007): No change since March 2004 version 2 - Method of solution: 3 - Restrictions on the complexity of the problem: RELABEL is designed to maintain ENDF/B processing programs which use a restricted set of FORTRAN statements. As such, this program is not completely general

  12. MODLIB, library of Fortran modules for nuclear reaction codes

    International Nuclear Information System (INIS)

    Talou, Patrick

    2006-01-01

    1 - Description of program or function: ModLib is a library of Fortran (90-compatible) modules to be used in existing and future nuclear reaction codes. The development of the library is an international effort being undertaken under the auspices of the long-term Subgroup A of the OECD/NEA Working Party on Evaluation and Cooperation. The aim is to constitute a library of well-tested and well-documented pieces of codes that can be used with confidence in all our coding efforts. This effort will undoubtedly help avoid the duplication of work, and most certainly facilitate the very important inter-comparisons between existing codes. 2 - Methods: - Width f luctuations [Talou, Chadwick]: calculates width fluctuation correction factors (output) for a set of transmission coefficients (input). Three methods are available: HRTW, Moldauer, and Verbaarschot (also called GOE approach). So far, no distinction is made according to the type of the coefficients channels (particle emission, gamma-ray emission, fission). - Gamma s trength [Herman]: calculates gamma-ray transmission coefficients using a Giant Resonance formalism. - Level d ensity [Koning]: computes the Gilbert-Cameron-Ignatyuk formalism for the continuum nuclear level density. - CHECKR, FIZCON, INTER, PSYCHE, STANEF [Dunford]: these modules are used in the MODLIB project but are not included in this package. They are available from the NEA Data Bank Computer Program Service under Package Ids: CHECKR (USCD1208), FIZCON (USCD1209), INTER (USCD1212), PSYCHE (USCD1216), STANEF (USCD1218)

  13. Parallelization of MCNP4 code by using simple FORTRAN algorithms

    International Nuclear Information System (INIS)

    Yazid, P.I.; Takano, Makoto; Masukawa, Fumihiro; Naito, Yoshitaka.

    1993-12-01

    Simple FORTRAN algorithms, that rely only on open, close, read and write statements, together with disk files and some UNIX commands have been applied to parallelization of MCNP4. The code, named MCNPNFS, maintains almost all capabilities of MCNP4 in solving shielding problems. It is able to perform parallel computing on a set of any UNIX workstations connected by a network, regardless of the heterogeneity in hardware system, provided that all processors produce a binary file in the same format. Further, it is confirmed that MCNPNFS can be executed also on Monte-4 vector-parallel computer. MCNPNFS has been tested intensively by executing 5 photon-neutron benchmark problems, a spent fuel cask problem and 17 sample problems included in the original code package of MCNP4. Three different workstations, connected by a network, have been used to execute MCNPNFS in parallel. By measuring CPU time, the parallel efficiency is determined to be 58% to 99% and 86% in average. On Monte-4, MCNPNFS has been executed using 4 processors concurrently and has achieved the parallel efficiency of 79% in average. (author)

  14. NLEdit: A generic graphical user interface for Fortran programs

    Science.gov (United States)

    Curlett, Brian P.

    1994-01-01

    NLEdit is a generic graphical user interface for the preprocessing of Fortran namelist input files. The interface consists of a menu system, a message window, a help system, and data entry forms. A form is generated for each namelist. The form has an input field for each namelist variable along with a one-line description of that variable. Detailed help information, default values, and minimum and maximum allowable values can all be displayed via menu picks. Inputs are processed through a scientific calculator program that allows complex equations to be used instead of simple numeric inputs. A custom user interface is generated simply by entering information about the namelist input variables into an ASCII file. There is no need to learn a new graphics system or programming language. NLEdit can be used as a stand-alone program or as part of a larger graphical user interface. Although NLEdit is intended for files using namelist format, it can be easily modified to handle other file formats.

  15. The FORTRAN NALAP code adapted to a microcomputer compiler

    International Nuclear Information System (INIS)

    Lobo, Paulo David de Castro; Borges, Eduardo Madeira; Braz Filho, Francisco Antonio; Guimaraes, Lamartine Nogueira Frutuoso

    2010-01-01

    The Nuclear Energy Division of the Institute for Advanced Studies (IEAv) is conducting the TERRA project (TEcnologia de Reatores Rapidos Avancados), Technology for Advanced Fast Reactors project, aimed at a space reactor application. In this work, to attend the TERRA project, the NALAP code adapted to a microcomputer compiler called Compaq Visual Fortran (Version 6.6) is presented. This code, adapted from the light water reactor transient code RELAP 3B, simulates thermal-hydraulic responses for sodium cooled fast reactors. The strategy to run the code in a PC was divided in some steps mainly to remove unnecessary routines, to eliminate old statements, to introduce new ones and also to include extension precision mode. The source program was able to solve three sample cases under conditions of protected transients suggested in literature: the normal reactor shutdown, with a delay of 200 ms to start the control rod movement and a delay of 500 ms to stop the pumps; reactor scram after transient of loss of flow; and transients protected from overpower. Comparisons were made with results from the time when the NALAP code was acquired by the IEAv, back in the 80's. All the responses for these three simulations reproduced the calculations performed with the CDC compiler in 1985. Further modifications will include the usage of gas as coolant for the nuclear reactor to allow a Closed Brayton Cycle Loop - CBCL - to be used as a heat/electric converter. (author)

  16. The FORTRAN NALAP code adapted to a microcomputer compiler

    Energy Technology Data Exchange (ETDEWEB)

    Lobo, Paulo David de Castro; Borges, Eduardo Madeira; Braz Filho, Francisco Antonio; Guimaraes, Lamartine Nogueira Frutuoso, E-mail: plobo.a@uol.com.b, E-mail: eduardo@ieav.cta.b, E-mail: fbraz@ieav.cta.b, E-mail: guimarae@ieav.cta.b [Instituto de Estudos Avancados (IEAv/CTA), Sao Jose dos Campos, SP (Brazil)

    2010-07-01

    The Nuclear Energy Division of the Institute for Advanced Studies (IEAv) is conducting the TERRA project (TEcnologia de Reatores Rapidos Avancados), Technology for Advanced Fast Reactors project, aimed at a space reactor application. In this work, to attend the TERRA project, the NALAP code adapted to a microcomputer compiler called Compaq Visual Fortran (Version 6.6) is presented. This code, adapted from the light water reactor transient code RELAP 3B, simulates thermal-hydraulic responses for sodium cooled fast reactors. The strategy to run the code in a PC was divided in some steps mainly to remove unnecessary routines, to eliminate old statements, to introduce new ones and also to include extension precision mode. The source program was able to solve three sample cases under conditions of protected transients suggested in literature: the normal reactor shutdown, with a delay of 200 ms to start the control rod movement and a delay of 500 ms to stop the pumps; reactor scram after transient of loss of flow; and transients protected from overpower. Comparisons were made with results from the time when the NALAP code was acquired by the IEAv, back in the 80's. All the responses for these three simulations reproduced the calculations performed with the CDC compiler in 1985. Further modifications will include the usage of gas as coolant for the nuclear reactor to allow a Closed Brayton Cycle Loop - CBCL - to be used as a heat/electric converter. (author)

  17. FORTRAN text correction with the CDC-1604-A console typewriter during reading a punched card program

    International Nuclear Information System (INIS)

    Kotorobaj, F.; Ruzhichka, Ya.; Stolyarskij, Yu.V.

    1977-01-01

    The paper describes FORTRAN text correction with the CDC 1604-A console typewriter during reading a punched card program. This method gives one more possibility of FORTRAN program correction during program's input to the CDC 1604-A computer. This essentially reduced the time necessary for punched card correction with other methods. Possibility of inputting desired number of punched cards one after another allows one writing small FORTRAN programs to computer core storage with simultaneous punching of the cards. The correction program has been written to the CDC 1604 COOP monitor

  18. The finite element structural analysis code SAP IV conversion from CDC to IBM

    International Nuclear Information System (INIS)

    Harrop, L.P.

    1977-02-01

    SAP IV is a general three dimensional, linear, static and dynamic finite element structural analysis program. The program which was obtained from the Earthquake Engineering Research Center, University of California, Berkeley, was written in FORTRAM for a CDC 6400. Its main use was anticipated to be the seismic analysis of reactor structures. SAP IV may also prove useful for fracture mechanics studies as well as the usual elastic stress analysis of structures. A brief description of SAP IV and a more detailed account of the FORTRAN conversion required to make SAP IV run successfully on the UKAEA Harwell IBM 370/168 are given. (author)

  19. Asteroids IV

    Science.gov (United States)

    Michel, Patrick; DeMeo, Francesca E.; Bottke, William F.

    . Asteroids, like planets, are driven by a great variety of both dynamical and physical mechanisms. In fact, images sent back by space missions show a collection of small worlds whose characteristics seem designed to overthrow our preconceived notions. Given their wide range of sizes and surface compositions, it is clear that many formed in very different places and at different times within the solar nebula. These characteristics make them an exciting challenge for researchers who crave complex problems. The return of samples from these bodies may ultimately be needed to provide us with solutions. In the book Asteroids IV, the editors and authors have taken major strides in the long journey toward a much deeper understanding of our fascinating planetary ancestors. This book reviews major advances in 43 chapters that have been written and reviewed by a team of more than 200 international authorities in asteroids. It is aimed to be as comprehensive as possible while also remaining accessible to students and researchers who are interested in learning about these small but nonetheless important worlds. We hope this volume will serve as a leading reference on the topic of asteroids for the decade to come. We are deeply indebted to the many authors and referees for their tremendous efforts in helping us create Asteroids IV. We also thank the members of the Asteroids IV scientific organizing committee for helping us shape the structure and content of the book. The conference associated with the book, "Asteroids Comets Meteors 2014" held June 30-July 4, 2014, in Helsinki, Finland, did an outstanding job of demonstrating how much progress we have made in the field over the last decade. We are extremely grateful to our host Karri Muinonnen and his team. The editors are also grateful to the Asteroids IV production staff, namely Renée Dotson and her colleagues at the Lunar and Planetary Institute, for their efforts, their invaluable assistance, and their enthusiasm; they made life as

  20. FORTRAN data files transference from VAX/VMS to ALPHA/UNIX; Traspaso de ficheros FORTRAN de datos de VAX/VMS a ALPHA/UNIX

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, E.; Milligen, B. Ph van [CIEMAT (Spain)

    1997-09-01

    Several tools have been developed to access the TJ-IU databases, which currently reside in VAX/VMS servers, from the TJ-II Data Acquisition System DEC ALPHA 8400 server. The TJ-I/TJ-IU databases are not homogeneous and contain several types of data files, namely, SADE, CAMAC and FORTRAN unformatted files. The tools presented in this report allow one to transfer CAMAC and those FORTRAN unformatted files defined herein, from a VAX/VMS server, for data manipulation on the ALPHA/Digital UNIX server. (Author)

  1. A Case Study of Some Issues in the Optimization of Fortran 90 Array Notation

    Directory of Open Access Journals (Sweden)

    John D. McCalpin

    1996-01-01

    Full Text Available Some issues in the relationship of coding style and compiler optimization are discussed with regard to Fortran 90 array notation. A review of several important Fortran 90 array constructs and their performance on vector and scalar hardware sets the stage for a more detailed example based on the kernel of a finite difference computational fluid dynamics model, specifically the nonlinear shallow water equations. Special attention is paid to the optimization of memory use and memory traffic. It is shown that the style of coding interacts with the rules of Fortran 90 and the current state of the art of Fortran 90 compilers to produce a fairly wide range of performance levels. Although performance degradations are typically small, a few cases of more serious loss of effciency are identified and discussed.

  2. Comparison of PASCAL and FORTRAN for solving problems in the physical sciences

    Science.gov (United States)

    Watson, V. R.

    1981-01-01

    The paper compares PASCAL and FORTRAN for problem solving in the physical sciences, due to requests NASA has received to make PASCAL available on the Numerical Aerodynamic Simulator (scheduled to be operational in 1986). PASCAL disadvantages include the lack of scientific utility procedures equivalent to the IBM scientific subroutine package or the IMSL package which are available in FORTRAN. Advantages include a well-organized, easy to read and maintain writing code, range checking to prevent errors, and a broad selection of data types. It is concluded that FORTRAN may be the better language, although ADA (patterned after PASCAL) may surpass FORTRAN due to its ability to add complex and vector math, and the specify the precision and range of variables.

  3. FORTRAN programs for transient eddy current calculations using a perturbation-polynomial expansion technique

    International Nuclear Information System (INIS)

    Carpenter, K.H.

    1976-11-01

    A description is given of FORTRAN programs for transient eddy current calculations in thin, non-magnetic conductors using a perturbation-polynomial expansion technique. Basic equations are presented as well as flow charts for the programs implementing them. The implementation is in two steps--a batch program to produce an intermediate data file and interactive programs to produce graphical output. FORTRAN source listings are included for all program elements, and sample inputs and outputs are given for the major programs

  4. Interactive computer graphics displays for hierarchical data structures. [Description of THESGRAF, in FORTRAN IV for CDC and IBM computers

    Energy Technology Data Exchange (ETDEWEB)

    Cahn, D.F.; Murano, C.V.

    1980-05-01

    An interactive computer graphical display program was developed as an aid to user visualization and manipulation of hierarchically structured data systems such as thesauri. In the present configuration, a thesaurus term and its primary and secondary conceptual neighbors are presented to the user in tree graph form on a CRT; the user then designates, via light pen or keyboard, any of the neighbors as the next term of interest and receives a new display centered on this term. By successive specification of broader, narrower, and related terms, the user can course rapidly through the thesaurus space and refine his search file. At any stage, he deals with a term-centered, conceptually meaningful picture of a localized portion of the thesaurus, and is freed from the artificial difficulties of handling the traditional alphabetized thesaurus. Intentional limitation of the associative range of each display frame, and the use of color, case, and interconnecting vectors to encode relationships among terms, enhance interpretability of the display. Facile movement through the term space, provided by interactive computation, allows the display to remain simple, and is an essential element of the system. 3 figures.

  5. The Transition and Adoption to Modern Programming Concepts for Scientific Computing in Fortran

    Directory of Open Access Journals (Sweden)

    Charles D. Norton

    2007-01-01

    Full Text Available This paper describes our experiences in the early exploration of modern concepts introduced in Fortran90 for large-scale scientific programming. We review our early work in expressing object-oriented concepts based on the new Fortran90 constructs – foreign to most programmers at the time – our experimental work in applying them to various applications, the impact on the WG5/J3 standards committees to consider formalizing object-oriented constructs for later versions of Fortran, and work in exploring how other modern programming techniques such as Design Patterns can and have impacted our software development. Applications will be drawn from plasma particle simulation and finite element adaptive mesh refinement for solid earth crustal deformation modeling.

  6. MPI to Coarray Fortran: Experiences with a CFD Solver for Unstructured Meshes

    Directory of Open Access Journals (Sweden)

    Anuj Sharma

    2017-01-01

    Full Text Available High-resolution numerical methods and unstructured meshes are required in many applications of Computational Fluid Dynamics (CFD. These methods are quite computationally expensive and hence benefit from being parallelized. Message Passing Interface (MPI has been utilized traditionally as a parallelization strategy. However, the inherent complexity of MPI contributes further to the existing complexity of the CFD scientific codes. The Partitioned Global Address Space (PGAS parallelization paradigm was introduced in an attempt to improve the clarity of the parallel implementation. We present our experiences of converting an unstructured high-resolution compressible Navier-Stokes CFD solver from MPI to PGAS Coarray Fortran. We present the challenges, methodology, and performance measurements of our approach using Coarray Fortran. With the Cray compiler, we observe Coarray Fortran as a viable alternative to MPI. We are hopeful that Intel and open-source implementations could be utilized in the future.

  7. PGHPF – An Optimizing High Performance Fortran Compiler for Distributed Memory Machines

    Directory of Open Access Journals (Sweden)

    Zeki Bozkus

    1997-01-01

    Full Text Available High Performance Fortran (HPF is the first widely supported, efficient, and portable parallel programming language for shared and distributed memory systems. HPF is realized through a set of directive-based extensions to Fortran 90. It enables application developers and Fortran end-users to write compact, portable, and efficient software that will compile and execute on workstations, shared memory servers, clusters, traditional supercomputers, or massively parallel processors. This article describes a production-quality HPF compiler for a set of parallel machines. Compilation techniques such as data and computation distribution, communication generation, run-time support, and optimization issues are elaborated as the basis for an HPF compiler implementation on distributed memory machines. The performance of this compiler on benchmark programs demonstrates that high efficiency can be achieved executing HPF code on parallel architectures.

  8. Visualization of Distributed Data Structures for High Performance Fortran-Like Languages

    Directory of Open Access Journals (Sweden)

    Rainer Koppler

    1997-01-01

    Full Text Available This article motivates the usage of graphics and visualization for efficient utilization of High Performance Fortran's (HPF's data distribution facilities. It proposes a graphical toolkit consisting of exploratory and estimation tools which allow the programmer to navigate through complex distributions and to obtain graphical ratings with respect to load distribution and communication. The toolkit has been implemented in a mapping design and visualization tool which is coupled with a compilation system for the HPF predecessor Vienna Fortran. Since this language covers a superset of HPF's facilities, the tool may also be used for visualization of HPF data structures.

  9. DB90: A Fortran Callable Relational Database Routine for Scientific and Engineering Computer Programs

    Science.gov (United States)

    Wrenn, Gregory A.

    2005-01-01

    This report describes a database routine called DB90 which is intended for use with scientific and engineering computer programs. The software is written in the Fortran 90/95 programming language standard with file input and output routines written in the C programming language. These routines should be completely portable to any computing platform and operating system that has Fortran 90/95 and C compilers. DB90 allows a program to supply relation names and up to 5 integer key values to uniquely identify each record of each relation. This permits the user to select records or retrieve data in any desired order.

  10. Bridging FORTRAN to object oriented paradigm for HEP data modeling task

    International Nuclear Information System (INIS)

    Huang, J.

    1993-12-01

    Object oriented (OO) technology appears to offer tangible benefits to the high energy physics (HEP) community. Yet many physicists view this newest software development used with much reservation and reluctance. Facing the reality of having to support the existing physics applications, which are written in FORTRAN, the software engineers in the Computer Engineering Group of the Physics Research Division at the Superconducting Super Collider Laboratory have accepted the challenge of mixing an old language with the new technology. This paper describes the experience and the techniques devised to fit FORTRAN into the OO paradigm (OOP)

  11. FORTRAN data files transference from VAX/VMS to ALPHA/UNIX

    International Nuclear Information System (INIS)

    Sanchez, E.; Milligen, B.Ph. van

    1997-01-01

    Several tools have been developed to access the TJ-I and TJ-IU databases, which currently reside in VAX/VMS servers, from the TJ-II Data Acquisition System DEC ALPHA 8400 server. The TJ-I/TJ-IU databases are not homogeneous and contain several types of data files, namely, SADE. CAMAC and FORTRAN un formatted files. The tools presented in this report allow one to transfer CAMAC and those FORTRAN un formatted files defined herein. from a VAX/VMS server, for data manipulation on the ALPHA/Digital UNIX server. (Author) 5 refs

  12. Fortran code for generating random probability vectors, unitaries, and quantum states

    Directory of Open Access Journals (Sweden)

    Jonas eMaziero

    2016-03-01

    Full Text Available The usefulness of generating random configurations is recognized in many areas of knowledge. Fortran was born for scientific computing and has been one of the main programming languages in this area since then. And several ongoing projects targeting towards its betterment indicate that it will keep this status in the decades to come. In this article, we describe Fortran codes produced, or organized, for the generation of the following random objects: numbers, probability vectors, unitary matrices, and quantum state vectors and density matrices. Some matrix functions are also included and may be of independent interest.

  13. Evaluation of ΔGsub(f) values for unstable compounds: a Fortran program for the calculation of ternary phase equilibria

    International Nuclear Information System (INIS)

    Throop, G.J.; Rogl, P.; Rudy, E.

    1978-01-01

    A Fortran IV program was set up for the calculation of phase equilibria and tieline distributions in ternary systems of the type: transition metal-transition metal-nonmetal (interstitial type of solid solutions). The method offers the possibility of determining the thermodynamic values for unstable compounds through their influence upon ternary phase equilibria. The variation of the free enthalpy of formation of ternary solid solutions is calculated as a function of nonmetal content, thus describing the actual curvature of the phase boundaries. The integral and partial molar free enthalpies of formation of binary nonstoichiometric compounds and of phase solutions are expressed as analytical functions of the nonmetal content within their homogeneity range. The coefficient of these analytical expressions are obtained by the use either of the Wagner-Schottky vacancy model or polynomials second order in composition (parabolic approach). The free energy of formation, ΔGsub(f) has been calculated for the systems Ti-C, Zr-C, and Ta-C. Calculations of the ternary phase equilibria yielded the values for ΔGsub(f) for the unstable compounds Ti 2 C at 1500 0 C and Zr 2 C at 1775 0 C of -22.3 and 22.7 kcal g atom metal respectively. These values were used for the calculation of isothermal sections within the ternary systems Ti-Ta-C (at 1500 0 C) and Zr-Ta-C (at 1775 0 C). The ideal case of ternary phase solutions is extended to regular solutions. (author)

  14. Using Coarrays to Parallelize Legacy Fortran Applications: Strategy and Case Study

    Directory of Open Access Journals (Sweden)

    Hari Radhakrishnan

    2015-01-01

    Full Text Available This paper summarizes a strategy for parallelizing a legacy Fortran 77 program using the object-oriented (OO and coarray features that entered Fortran in the 2003 and 2008 standards, respectively. OO programming (OOP facilitates the construction of an extensible suite of model-verification and performance tests that drive the development. Coarray parallel programming facilitates a rapid evolution from a serial application to a parallel application capable of running on multicore processors and many-core accelerators in shared and distributed memory. We delineate 17 code modernization steps used to refactor and parallelize the program and study the resulting performance. Our initial studies were done using the Intel Fortran compiler on a 32-core shared memory server. Scaling behavior was very poor, and profile analysis using TAU showed that the bottleneck in the performance was due to our implementation of a collective, sequential summation procedure. We were able to improve the scalability and achieve nearly linear speedup by replacing the sequential summation with a parallel, binary tree algorithm. We also tested the Cray compiler, which provides its own collective summation procedure. Intel provides no collective reductions. With Cray, the program shows linear speedup even in distributed-memory execution. We anticipate similar results with other compilers once they support the new collective procedures proposed for Fortran 2015.

  15. Pseudo-BINPUT, a free formal input package for Fortran programmes

    International Nuclear Information System (INIS)

    Gubbins, M.E.

    1977-11-01

    Pseudo - BINPUT is an input package for reading free format data in codeword control in a FORTRAN programme. To a large degree it mimics in function the Winfrith Subroutine Library routine BINPUT. By using calls of the data input package DECIN to mimic the input routine BINPUT, Pseudo - BINPUT combines some of the advantages of both systems. (U.K.)

  16. A FORTRAN program for an IBM PC compatible computer for calculating kinematical electron diffraction patterns

    International Nuclear Information System (INIS)

    Skjerpe, P.

    1989-01-01

    This report describes a computer program which is useful in transmission electron microscopy. The program is written in FORTRAN and calculates kinematical electron diffraction patterns in any zone axis from a given crystal structure. Quite large unit cells, containing up to 2250 atoms, can be handled by the program. The program runs on both the Helcules graphic card and the standard IBM CGA card

  17. SLACINPT - a FORTRAN program that generates boundary data for the SLAC gun code

    International Nuclear Information System (INIS)

    Michel, W.L.; Hepburn, J.D.

    1982-03-01

    The FORTRAN program SLACINPT was written to simplify the preparation of boundary data for the SLAC gun code. In SLACINPT, the boundary is described by a sequence of straight line or arc segments. From these, the program generates the individual boundary mesh point data, required as input by the SLAC gun code

  18. Extracting UML Class Diagrams from Object-Oriented Fortran: ForUML

    Directory of Open Access Journals (Sweden)

    Aziz Nanthaamornphong

    2015-01-01

    Full Text Available Many scientists who implement computational science and engineering software have adopted the object-oriented (OO Fortran paradigm. One of the challenges faced by OO Fortran developers is the inability to obtain high level software design descriptions of existing applications. Knowledge of the overall software design is not only valuable in the absence of documentation, it can also serve to assist developers with accomplishing different tasks during the software development process, especially maintenance and refactoring. The software engineering community commonly uses reverse engineering techniques to deal with this challenge. A number of reverse engineering-based tools have been proposed, but few of them can be applied to OO Fortran applications. In this paper, we propose a software tool to extract unified modeling language (UML class diagrams from Fortran code. The UML class diagram facilitates the developers' ability to examine the entities and their relationships in the software system. The extracted diagrams enhance software maintenance and evolution. The experiments carried out to evaluate the proposed tool show its accuracy and a few of the limitations.

  19. Autogenic Feedback Training (Body Fortran) with Biofeedback and the Computer for Self-Improvement and Change.

    Science.gov (United States)

    Cassel, Russell N.; Sumintardja, Elmira Nasrudin

    1983-01-01

    Describes autogenic feedback training, which provides the basis whereby an individual is able to improve on well being through use of a technique described as "body fortran," implying that you program self as one programs a computer. Necessary requisites are described including relaxation training and the management of stress. (JAC)

  20. Innovative Language-Based & Object-Oriented Structured AMR Using Fortran 90 and OpenMP

    Science.gov (United States)

    Norton, C.; Balsara, D.

    1999-01-01

    Parallel adaptive mesh refinement (AMR) is an important numerical technique that leads to the efficient solution of many physical and engineering problems. In this paper, we describe how AMR programing can be performed in an object-oreinted way using the modern aspects of Fortran 90 combined with the parallelization features of OpenMP.

  1. IV treatment at home

    Science.gov (United States)

    ... Other IV treatments you may receive after you leave the hospital include: Treatment for hormone deficiencies Medicines for severe nausea that cancer chemotherapy or pregnancy may cause Patient-controlled analgesia (PCA) for pain (this is IV ...

  2. Fluid dynamics applications of the Illiac IV computer

    Science.gov (United States)

    Maccormack, R. W.; Stevens, K. G., Jr.

    1976-01-01

    The Illiac IV is a parallel-structure computer with computing power an order of magnitude greater than that of conventional computers. It can be used for experimental tasks in fluid dynamics which can be simulated more economically, for simulating flows that cannot be studied by experiment, and for combining computer and experimental simulations. The architecture of Illiac IV is described, and the use of its parallel operation is demonstrated on the example of its solution of the one-dimensional wave equation. For fluid dynamics problems, a special FORTRAN-like vector programming language was devised, called CFD language. Two applications are described in detail: (1) the determination of the flowfield around the space shuttle, and (2) the computation of transonic turbulent separated flow past a thick biconvex airfoil.

  3. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2012-12-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  4. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2013-02-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  5. Running the EGS4 Monte Carlo code with Fortran 90 on a pentium computer

    International Nuclear Information System (INIS)

    Caon, M.; Bibbo, G.; Pattison, J.

    1996-01-01

    The possibility to run the EGS4 Monte Carlo code radiation transport system for medical radiation modelling on a microcomputer is discussed. This has been done using a Fortran 77 compiler with a 32-bit memory addressing system running under a memory extender operating system. In addition a virtual memory manager such as QEMM386 was required. It has successfully run on a SUN Sparcstation2. In 1995 faster Pentium-based microcomputers became available as did the Windows 95 operating system which can handle 32-bit programs, multitasking and provides its own virtual memory management. The paper describe how with simple modification to the batch files it was possible to run EGS4 on a Pentium under Fortran 90 and Windows 95. This combination of software and hardware is cheaper and faster than running it on a SUN Sparcstation2. 8 refs., 1 tab

  6. Running the EGS4 Monte Carlo code with Fortran 90 on a pentium computer

    Energy Technology Data Exchange (ETDEWEB)

    Caon, M. [Flinders Univ. of South Australia, Bedford Park, SA (Australia)]|[Univercity of South Australia, SA (Australia); Bibbo, G. [Womens and Childrens hospital, SA (Australia); Pattison, J. [Univercity of South Australia, SA (Australia)

    1996-09-01

    The possibility to run the EGS4 Monte Carlo code radiation transport system for medical radiation modelling on a microcomputer is discussed. This has been done using a Fortran 77 compiler with a 32-bit memory addressing system running under a memory extender operating system. In addition a virtual memory manager such as QEMM386 was required. It has successfully run on a SUN Sparcstation2. In 1995 faster Pentium-based microcomputers became available as did the Windows 95 operating system which can handle 32-bit programs, multitasking and provides its own virtual memory management. The paper describe how with simple modification to the batch files it was possible to run EGS4 on a Pentium under Fortran 90 and Windows 95. This combination of software and hardware is cheaper and faster than running it on a SUN Sparcstation2. 8 refs., 1 tab.

  7. A browser-based tool for conversion between Fortran NAMELIST and XML/HTML

    Science.gov (United States)

    Naito, O.

    A browser-based tool for conversion between Fortran NAMELIST and XML/HTML is presented. It runs on an HTML5 compliant browser and generates reusable XML files to aid interoperability. It also provides a graphical interface for editing and annotating variables in NAMELIST, hence serves as a primitive code documentation environment. Although the tool is not comprehensive, it could be viewed as a test bed for integrating legacy codes into modern systems.

  8. FORTRAN subroutine for computing the optimal estimate of f(x)

    International Nuclear Information System (INIS)

    Gaffney, P.W.

    1980-10-01

    A FORTRAN subroutine called RANGE is presented that is designed to compute the optimal estimate of a function f given values of the function at n distinct points x 1 2 < ... < x/sub n/ and given a bound on one of the derivatives of f. We donate this estimate by Ω. It is optimal in the sense that the error abs value (f - Ω) has the smallest possible error bound

  9. A browser-based tool for conversion between Fortran NAMELIST and XML/HTML

    Directory of Open Access Journals (Sweden)

    O. Naito

    2017-01-01

    Full Text Available A browser-based tool for conversion between Fortran NAMELIST and XML/HTML is presented. It runs on an HTML5 compliant browser and generates reusable XML files to aid interoperability. It also provides a graphical interface for editing and annotating variables in NAMELIST, hence serves as a primitive code documentation environment. Although the tool is not comprehensive, it could be viewed as a test bed for integrating legacy codes into modern systems.

  10. The inverse of winnowing: a FORTRAN subroutine and discussion of unwinnowing discrete data

    Science.gov (United States)

    Bracken, Robert E.

    2004-01-01

    This report describes an unwinnowing algorithm that utilizes a discrete Fourier transform, and a resulting Fortran subroutine that winnows or unwinnows a 1-dimensional stream of discrete data; the source code is included. The unwinnowing algorithm effectively increases (by integral factors) the number of available data points while maintaining the original frequency spectrum of a data stream. This has utility when an increased data density is required together with an availability of higher order derivatives that honor the original data.

  11. A FORTRAN version implementation of block adjustment of CCD frames and its preliminary application

    Science.gov (United States)

    Yu, Y.; Tang, Z.-H.; Li, J.-L.; Zhao, M.

    2005-09-01

    A FORTRAN version implementation of the block adjustment (BA) of overlapping CCD frames is developed and its flowchart is shown. The program is preliminarily applied to obtain the optical positions of four extragalactic radio sources. The results show that because of the increase in the number and sky coverage of reference stars the precision of optical positions with BA is improved compared with the single CCD frame adjustment.

  12. Existing Fortran interfaces to Trilinos in preparation for exascale ForTrilinos development

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Katherine J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Young, Mitchell T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Collins, Benjamin S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Johnson, Seth R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Prokopenko, Andrey V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Heroux, Michael A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    This report summarizes the current state of Fortran interfaces to the Trilinos library within several key applications of the Exascale Computing Program (ECP), with the aim of informing developers about strategies to develop ForTrilinos, an exascale-ready, Fortran interface software package within Trilinos. The two software projects assessed within are the DOE Office of Science's Accelerated Climate Model for Energy (ACME) atmosphere component, CAM, and the DOE Office of Nuclear Energy's core-simulator portion of VERA, a nuclear reactor simulation code. Trilinos is an object-oriented, C++ based software project, and spans a collection of algorithms and other enabling technologies such as uncertainty quantification and mesh generation. To date, Trilinos has enabled these codes to achieve large-scale simulation results, however the simulation needs of CAM and VERA-CS will approach exascale over the next five years. A Fortran interface to Trilinos that enables efficient use of programming models and more advanced algorithms is necessary. Where appropriate, the needs of the CAM and VERA-CS software to achieve their simulation goals are called out specifically. With this report, a design document and execution plan for ForTrilinos development can proceed.

  13. TOOLPACK1, Tools for Development and Maintenance of FORTRAN 77 Program

    International Nuclear Information System (INIS)

    Cowell, Wayne R.

    1993-01-01

    1 - Description of program or function: TOOLPACK1 consists of the following categories of software; (1) an integrated collection of tools intended to support the development and maintenance of FORTRAN 77 programs, in particular moderate-sized collections of mathematical software; (2) several user/Toolpack interfaces, one of which is selected for use at any particular installation; (3) three implementations of the tool/system interface, called TIE (Tool Interface to the Environment). The tools are written in FORTRAN 77 and are portable among TIE installations. The source contains symbolic constants as macro names and must be expanded with a suitable macro expander before being compiled and loaded. A portable macro expander is supplied in TOOLPACK1. The tools may be divided into three functional areas: general, documentation, and processing. One tool, the macro processor, Can be used in any of these categories. ISTDC: data comparison tool is designed mainly for comparing files of numeric values, and files with embedded text. ISTET Expands tabs. ISTFI: finds all the include files that a file needs. ISTGP Searches multiple files for occurrences of a regular expression. ISTHP: will provide limited help information about tools. ISTMP: The macro processor may be used to pre-process a file. The processor provides macro replacement, inclusion, conditional replacement, and processing capabilities for complex file processing. ISTSP: TIE-conforming version of the SPLIT utility to split up the concatenated files used on the tape. ISTSV: save/restore utility to save and restore sub-trees of the Portable File Store (PFS). ISTTD: text comparison tool. ISTVC: simple text file version controller. ISTAL: aids is a preprocessor that can be used to generate specific information from intermediate files created by other tools. The information that can be generated includes call-graphs, cross reference listings, segment execution frequencies, and symbol information. ISTAL can also strip

  14. Generation IV national program

    International Nuclear Information System (INIS)

    Preville, M.; Sadhankar, R.; Brady, D.

    2007-01-01

    This paper outlines the Generation IV National Program. This program involves evolutionary and innovative design with significantly higher efficiencies (∼50% compared to present ∼30%) - sustainable, economical, safe, reliable and proliferation resistant - for future energy security. The Generation IV Forum (GIF) effectively leverages the resources of the participants to meet these goals. Ten countries signed the GIF Charter in 2001

  15. Neptunium (IV) oxalate solubility

    International Nuclear Information System (INIS)

    Luerkens, D.W.

    1983-07-01

    The equilibrium solubility of neptunium (IV) oxalate in nitric/oxalic acid solutions was determined at 22 0 C, 45 0 C, and 60 0 C. The concentrations of nitric/oxalic acid solutions represented a wide range of free oxalate ion concentration. A mathematical solubility model was developed which is based on the formation of the known complexes of neptunium (IV) oxalate. the solubility model uses a simplified concentration parameter which is proportional to the free oxalate ion concentration. The solubility model can be used to estimate the equilibrium solubility of neptunium (IV) oxalate over a wide range of oxalic and nitric acid concentrations at each temperature

  16. A Fortran program (RELAX3D) to solve the 3 dimensional Poisson (Laplace) equation

    International Nuclear Information System (INIS)

    Houtman, H.; Kost, C.J.

    1983-09-01

    RELAX3D is an efficient, user friendly, interactive FORTRAN program which solves the Poisson (Laplace) equation Λ 2 =p for a general 3 dimensional geometry consisting of Dirichlet and Neumann boundaries approximated to lie on a regular 3 dimensional mesh. The finite difference equations at these nodes are solved using a successive point-iterative over-relaxation method. A menu of commands, supplemented by HELP facility, controls the dynamic loading of the subroutine describing the problem case, the iterations to converge to a solution, and the contour plotting of any desired slices, etc

  17. CWF and TABLE - Two Fortran programmes for the calculation of Coulomb penetration and shift factors

    International Nuclear Information System (INIS)

    Norton, D.S.; James, M.F.

    1965-12-01

    CWF and TABLE are Fortran programmes, written for the IBM 7090 and English-Electric Leo Marconi KDF9 computers, that calculate the penetration and shift factors for a charged particle in a Coulomb field. The numerical methods used are those of Lutz and Karvelis. The two programmes are very similar. Input to TABLE is in the form of the centre-of-mass co-ordinates. CWF is intended for use in calculating cross-sections for neutron-induced reactions which result in charged particle emission, and the input is in the form of the neutron energy in the laboratory frame of reference, together with other necessary reaction data. (author)

  18. LIONS: a new set of Fortran 90 codes for the SPIRAL project at GANIL

    International Nuclear Information System (INIS)

    Bertrand, P.

    1994-01-01

    A set of new computer programs developed at GANIL is presented; these codes are used to study different parts of the SPIRAL project (a new radioactive ion beam facility), and particularly the dynamics in the CIME cyclotron, its injection inflector, and the new extraction system of the ECR ion sources. Three important modules are described: CHA3D for the evaluation of 3D electric fields with or without space charge effects, LIONS for the motion of ions and EXTRACT for the ECRIS extraction. These modules are written in Fortran 90 in a ''data parallel scheme''. They work either on UNIX workstations or parallel and vectorial computers. (author). 5 figs., 5 refs

  19. MONTEC, an interactive fortran program to simulate radiation dose and dose-rate responses of populations

    International Nuclear Information System (INIS)

    Perry, K.A.; Szekely, J.G.

    1983-09-01

    The computer program MONTEC was written to simulate the distribution of responses in a population whose members are exposed to multiple radiation doses at variable dose rates. These doses and dose rates are randomly selected from lognormal distributions. The individual radiation responses are calculated from three equations, which include dose and dose-rate terms. Other response-dose/rate relationships or distributions can be incorporated by the user as the need arises. The purpose of this documentation is to provide a complete operating manual for the program. This version is written in FORTRAN-10 for the DEC system PDP-10

  20. QEDMOD: Fortran program for calculating the model Lamb-shift operator

    Science.gov (United States)

    Shabaev, V. M.; Tupitsyn, I. I.; Yerokhin, V. A.

    2018-02-01

    We present Fortran package QEDMOD for computing the model QED operator hQED that can be used to account for the Lamb shift in accurate atomic-structure calculations. The package routines calculate the matrix elements of hQED with the user-specified one-electron wave functions. The operator can be used to calculate Lamb shift in many-electron atomic systems with a typical accuracy of few percent, either by evaluating the matrix element of hQED with the many-electron wave function, or by adding hQED to the Dirac-Coulomb-Breit Hamiltonian.

  1. LIONS: a new set of Fortran90 codes for the SPIRAL project at GANIL

    International Nuclear Information System (INIS)

    Bertrand, P.

    1995-01-01

    In this paper a set of new computer programs developed at GANIL is presented. These codes are used to study different parts of the SPIRAL project, in particular the dynamics in the CIME cyclotron and the new extraction system of the ECR ion sources. Three important modules are described: CHA3D for the evaluation of 3D electric fields with or without space charge effects, LIONS for the motion of ions and EXTRACT for the ECRIS extraction. These modules are written in Fortran90 in a ''data parallel scheme''. They work either on UNIX workstations or parallel and vectorial computers. (orig.)

  2. JTpack90: A parallel, object-based, Fortran 90 linear algebra package

    Energy Technology Data Exchange (ETDEWEB)

    Turner, J.A.; Kothe, D.B. [Los Alamos National Lab., NM (United States); Ferrell, R.C. [Cambridge Power Computing Associates, Ltd., Brookline, MA (United States)

    1997-03-01

    The authors have developed an object-based linear algebra package, currently with emphasis on sparse Krylov methods, driven primarily by needs of the Los Alamos National Laboratory parallel unstructured-mesh casting simulation tool Telluride. Support for a number of sparse storage formats, methods, and preconditioners have been implemented, driven primarily by application needs. They describe the object-based Fortran 90 approach, which enhances maintainability, performance, and extensibility, the parallelization approach using a new portable gather/scatter library (PGSLib), current capabilities and future plans, and present preliminary performance results on a variety of platforms.

  3. Fortran code for SU(3) lattice gauge theory with and without MPI checkerboard parallelization

    Science.gov (United States)

    Berg, Bernd A.; Wu, Hao

    2012-10-01

    We document plain Fortran and Fortran MPI checkerboard code for Markov chain Monte Carlo simulations of pure SU(3) lattice gauge theory with the Wilson action in D dimensions. The Fortran code uses periodic boundary conditions and is suitable for pedagogical purposes and small scale simulations. For the Fortran MPI code two geometries are covered: the usual torus with periodic boundary conditions and the double-layered torus as defined in the paper. Parallel computing is performed on checkerboards of sublattices, which partition the full lattice in one, two, and so on, up to D directions (depending on the parameters set). For updating, the Cabibbo-Marinari heatbath algorithm is used. We present validations and test runs of the code. Performance is reported for a number of currently used Fortran compilers and, when applicable, MPI versions. For the parallelized code, performance is studied as a function of the number of processors. Program summary Program title: STMC2LSU3MPI Catalogue identifier: AEMJ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEMJ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 26666 No. of bytes in distributed program, including test data, etc.: 233126 Distribution format: tar.gz Programming language: Fortran 77 compatible with the use of Fortran 90/95 compilers, in part with MPI extensions. Computer: Any capable of compiling and executing Fortran 77 or Fortran 90/95, when needed with MPI extensions. Operating system: Red Hat Enterprise Linux Server 6.1 with OpenMPI + pgf77 11.8-0, Centos 5.3 with OpenMPI + gfortran 4.1.2, Cray XT4 with MPICH2 + pgf90 11.2-0. Has the code been vectorised or parallelized?: Yes, parallelized using MPI extensions. Number of processors used: 2 to 11664 RAM: 200 Mega bytes per process. Classification: 11

  4. FORTRAN computer programs to process Savannah River Laboratory hydrogeochemical and stream-sediment reconnaissance data

    International Nuclear Information System (INIS)

    Zinkl, R.J.; Shettel, D.L. Jr.; D'Andrea, R.F. Jr.

    1980-03-01

    FORTRAN computer programs have been written to read, edit, and reformat the hydrogeochemical and stream-sediment reconnaissance data produced by Savannah River Laboratory for the National Uranium Resource Evaluation program. The data are presorted by Savannah River Laboratory into stream sediment, ground water, and stream water for each 1 0 x 2 0 quadrangle. Extraneous information is eliminated, and missing analyses are assigned a specific value (-99999.0). Negative analyses are below the detection limit; the absolute value of a negative analysis is assumed to be the detection limit

  5. A new Fortran 90 program to compute regular and irregular associated Legendre functions (new version announcement)

    Science.gov (United States)

    Schneider, Barry I.; Segura, Javier; Gil, Amparo; Guan, Xiaoxu; Bartschat, Klaus

    2018-04-01

    This is a revised and updated version of a modern Fortran 90 code to compute the regular Plm (x) and irregular Qlm (x) associated Legendre functions for all x ∈(- 1 , + 1) (on the cut) and | x | > 1 and integer degree (l) and order (m). The necessity to revise the code comes as a consequence of some comments of Prof. James Bremer of the UC//Davis Mathematics Department, who discovered that there were errors in the code for large integer degree and order for the normalized regular Legendre functions on the cut.

  6. specsim: A Fortran-77 program for conditional spectral simulation in 3D

    Science.gov (United States)

    Yao, Tingting

    1998-12-01

    A Fortran 77 program, specsim, is presented for conditional spectral simulation in 3D domains. The traditional Fourier integral method allows generating random fields with a given covariance spectrum. Conditioning to local data is achieved by an iterative identification of the conditional phase information. A flowchart of the program is given to illustrate the implementation procedures of the program. A 3D case study is presented to demonstrate application of the program. A comparison with the traditional sequential Gaussian simulation algorithm emphasizes the advantages and drawbacks of the proposed algorithm.

  7. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  8. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  9. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  10. SAGE IV Pathfinder

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilizing a unique, new occultation technique involving imaging, the SAGE IV concept will meet or exceed the quality of previous SAGE measurements at a small...

  11. The formal specification of abstract data types and their implementation in Fortran 90: implementation issues concerning the use of pointers

    Science.gov (United States)

    Maley, D.; Kilpatrick, P. L.; Schreiner, E. W.; Scott, N. S.; Diercksen, G. H. F.

    1996-10-01

    In this paper we continue our investigation into the development of computational-science software based on the identification and formal specification of Abstract Data Types (ADTs) and their implementation in Fortran 90. In particular, we consider the consequences of using pointers when implementing a formally specified ADT in Fortran 90. Our aim is to highlight the resulting conflict between the goal of information hiding, which is central to the ADT methodology, and the space efficiency of the implementation. We show that the issue of storage recovery cannot be avoided by the ADT user, and present a range of implementations of a simple ADT to illustrate various approaches towards satisfactory storage management. Finally, we propose a set of guidelines for implementing ADTs using pointers in Fortran 90. These guidelines offer a way gracefully to provide disposal operations in Fortran 90. Such an approach is desirable since Fortran 90 does not provide automatic garbage collection which is offered by many object-oriented languages including Eiffel, Java, Smalltalk, and Simula.

  12. DDT: A Research Tool for Automatic Data Distribution in High Performance Fortran

    Directory of Open Access Journals (Sweden)

    Eduard AyguadÉ

    1997-01-01

    Full Text Available This article describes the main features and implementation of our automatic data distribution research tool. The tool (DDT accepts programs written in Fortran 77 and generates High Performance Fortran (HPF directives to map arrays onto the memories of the processors and parallelize loops, and executable statements to remap these arrays. DDT works by identifying a set of computational phases (procedures and loops. The algorithm builds a search space of candidate solutions for these phases which is explored looking for the combination that minimizes the overall cost; this cost includes data movement cost and computation cost. The movement cost reflects the cost of accessing remote data during the execution of a phase and the remapping costs that have to be paid in order to execute the phase with the selected mapping. The computation cost includes the cost of executing a phase in parallel according to the selected mapping and the owner computes rule. The tool supports interprocedural analysis and uses control flow information to identify how phases are sequenced during the execution of the application.

  13. OpenMP-accelerated SWAT simulation using Intel C and FORTRAN compilers: Development and benchmark

    Science.gov (United States)

    Ki, Seo Jin; Sugimura, Tak; Kim, Albert S.

    2015-02-01

    We developed a practical method to accelerate execution of Soil and Water Assessment Tool (SWAT) using open (free) computational resources. The SWAT source code (rev 622) was recompiled using a non-commercial Intel FORTRAN compiler in Ubuntu 12.04 LTS Linux platform, and newly named iOMP-SWAT in this study. GNU utilities of make, gprof, and diff were used to develop the iOMP-SWAT package, profile memory usage, and check identicalness of parallel and serial simulations. Among 302 SWAT subroutines, the slowest routines were identified using GNU gprof, and later modified using Open Multiple Processing (OpenMP) library in an 8-core shared memory system. In addition, a C wrapping function was used to rapidly set large arrays to zero by cross compiling with the original SWAT FORTRAN package. A universal speedup ratio of 2.3 was achieved using input data sets of a large number of hydrological response units. As we specifically focus on acceleration of a single SWAT run, the use of iOMP-SWAT for parameter calibrations will significantly improve the performance of SWAT optimization.

  14. The development of GPU-based parallel PRNG for Monte Carlo applications in CUDA Fortran

    Directory of Open Access Journals (Sweden)

    Hamed Kargaran

    2016-04-01

    Full Text Available The implementation of Monte Carlo simulation on the CUDA Fortran requires a fast random number generation with good statistical properties on GPU. In this study, a GPU-based parallel pseudo random number generator (GPPRNG have been proposed to use in high performance computing systems. According to the type of GPU memory usage, GPU scheme is divided into two work modes including GLOBAL_MODE and SHARED_MODE. To generate parallel random numbers based on the independent sequence method, the combination of middle-square method and chaotic map along with the Xorshift PRNG have been employed. Implementation of our developed PPRNG on a single GPU showed a speedup of 150x and 470x (with respect to the speed of PRNG on a single CPU core for GLOBAL_MODE and SHARED_MODE, respectively. To evaluate the accuracy of our developed GPPRNG, its performance was compared to that of some other commercially available PPRNGs such as MATLAB, FORTRAN and Miller-Park algorithm through employing the specific standard tests. The results of this comparison showed that the developed GPPRNG in this study can be used as a fast and accurate tool for computational science applications.

  15. The development of GPU-based parallel PRNG for Monte Carlo applications in CUDA Fortran

    Energy Technology Data Exchange (ETDEWEB)

    Kargaran, Hamed, E-mail: h-kargaran@sbu.ac.ir; Minuchehr, Abdolhamid; Zolfaghari, Ahmad [Department of nuclear engineering, Shahid Behesti University, Tehran, 1983969411 (Iran, Islamic Republic of)

    2016-04-15

    The implementation of Monte Carlo simulation on the CUDA Fortran requires a fast random number generation with good statistical properties on GPU. In this study, a GPU-based parallel pseudo random number generator (GPPRNG) have been proposed to use in high performance computing systems. According to the type of GPU memory usage, GPU scheme is divided into two work modes including GLOBAL-MODE and SHARED-MODE. To generate parallel random numbers based on the independent sequence method, the combination of middle-square method and chaotic map along with the Xorshift PRNG have been employed. Implementation of our developed PPRNG on a single GPU showed a speedup of 150x and 470x (with respect to the speed of PRNG on a single CPU core) for GLOBAL-MODE and SHARED-MODE, respectively. To evaluate the accuracy of our developed GPPRNG, its performance was compared to that of some other commercially available PPRNGs such as MATLAB, FORTRAN and Miller-Park algorithm through employing the specific standard tests. The results of this comparison showed that the developed GPPRNG in this study can be used as a fast and accurate tool for computational science applications.

  16. A brief description and comparison of programming languages FORTRAN, ALGOL, COBOL, PL/1, and LISP 1.5 from a critical standpoint

    Science.gov (United States)

    Mathur, F. P.

    1972-01-01

    Several common higher level program languages are described. FORTRAN, ALGOL, COBOL, PL/1, and LISP 1.5 are summarized and compared. FORTRAN is the most widely used scientific programming language. ALGOL is a more powerful language for scientific programming. COBOL is used for most commercial programming applications. LISP 1.5 is primarily a list-processing language. PL/1 attempts to combine the desirable features of FORTRAN, ALGOL, and COBOL into a single language.

  17. Implementation of Neutronics Analysis Code using the Features of Object Oriented Programming via Fortran90/95

    Energy Technology Data Exchange (ETDEWEB)

    Han, Tae Young; Cho, Beom Jin [KEPCO Nuclear Fuel, Daejeon (Korea, Republic of)

    2011-05-15

    The object-oriented programming (OOP) concept was radically established after 1990s and successfully involved in Fortran 90/95. The features of OOP are such as the information hiding, encapsulation, modularity and inheritance, which lead to producing code that satisfy three R's: reusability, reliability and readability. The major OOP concepts, however, except Module are not mainly used in neutronics analysis codes even though the code was written by Fortran 90/95. In this work, we show that the OOP concept can be employed to develop the neutronics analysis code, ASTRA1D (Advanced Static and Transient Reactor Analyzer for 1-Dimension), via Fortran90/95 and those can be more efficient and reasonable programming methods

  18. Implementation of the Next Generation Attenuation (NGA) ground-motion prediction equations in Fortran and R

    Science.gov (United States)

    Kaklamanos, James; Boore, David M.; Thompson, Eric M.; Campbell, Kenneth W.

    2010-01-01

    This report presents two methods for implementing the earthquake ground-motion prediction equations released in 2008 as part of the Next Generation Attenuation of Ground Motions (NGA-West, or NGA) project coordinated by the Pacific Earthquake Engineering Research Center (PEER). These models were developed for predicting ground-motion parameters for shallow crustal earthquakes in active tectonic regions (such as California). Of the five ground-motion prediction equations (GMPEs) developed during the NGA project, four models are implemented: the GMPEs of Abrahamson and Silva (2008), Boore and Atkinson (2008), Campbell and Bozorgnia (2008), and Chiou and Youngs (2008a); these models are abbreviated as AS08, BA08, CB08, and CY08, respectively. Since site response is widely recognized as an important influence of ground motions, engineering applications typically require that such effects be modeled. The model of Idriss (2008) is not implemented in our programs because it does not explicitly include site response, whereas the other four models include site response and use the same variable to describe the site condition (VS30). We do not intend to discourage the use of the Idriss (2008) model, but we have chosen to implement the other four NGA models in our programs for those users who require ground-motion estimates for various site conditions. We have implemented the NGA models by using two separate programming languages: Fortran and R (R Development Core Team, 2010). Fortran, a compiled programming language, has been used in the scientific community for decades. R is an object-oriented language and environment for statistical computing that is gaining popularity in the statistical and scientific community. Derived from the S language and environment developed at Bell Laboratories, R is an open-source language that is freely available at http://www.r-project.org/ (last accessed 11 January 2011). In R, the functions for computing the NGA equations can be loaded as an

  19. IV access in dental practice.

    LENUS (Irish Health Repository)

    Fitzpatrick, J J

    2009-04-01

    Intravenous (IV) access is a valuable skill for dental practitioners in emergency situations and in IV sedation. However, many people feel some apprehension about performing this procedure. This article explains the basic principles behind IV access, and the relevant anatomy and physiology, as well as giving a step-by-step guide to placing an IV cannula.

  20. Internet Economics IV

    Science.gov (United States)

    2004-08-01

    edts.): Internet Economics IV Technical Report No. 2004-04, August 2004 Information Systems Laboratory IIS, Departement of Computer Science University of...level agreements (SLA), Information technology (IT), Internet address, Internet service provider 16. PRICE CODE 17. SECURITY CLASSIFICATION 18... technology and its economic impacts in the Internet world today. The second talk addresses the area of AAA protocol, summarizing authentication

  1. Uranium (IV) carboxylates - I

    Energy Technology Data Exchange (ETDEWEB)

    Satpathy, K C; Patnaik, A K [Sambalpur Univ. (India). Dept. of Chemistry

    1975-11-01

    A few uranium(IV) carboxylates with monochloro and trichloro acetic acid, glycine, malic, citric, adipic, o-toluic, anthranilic and salicylic acids have been prepared by photolytic methods. The I.R. spectra of these compounds are recorded and basing on the spectral data, structure of the compounds have been suggested.

  2. PLATO IV Accountancy Index.

    Science.gov (United States)

    Pondy, Dorothy, Comp.

    The catalog was compiled to assist instructors in planning community college and university curricula using the 48 computer-assisted accountancy lessons available on PLATO IV (Programmed Logic for Automatic Teaching Operation) for first semester accounting courses. It contains information on lesson access, lists of acceptable abbreviations for…

  3. SIOB: a FORTRAN code for least-squares shape fitting several neutron transmission measurements using the Breit--Wigner multilevel formula. [For IBM-360/91

    Energy Technology Data Exchange (ETDEWEB)

    de Saussure, G.; Olsen, D. K.; Perez, R. B.

    1978-05-01

    The FORTRAN-IV code SIOB was developed to least-square fit the shape of neutron transmission curves. Any number of measurements on a common energy scale for different sample thicknesses can be simultaneously fitted. The computed transmission curves can be broadened with either a Gaussian or a rectangular resolution function or both, with the resolution width a function of energy. The total cross section is expressed as a sum of single-level or multilevel Breit--Wigner terms and Doppler broadened by using the fast interpolation routine QUICKW. The number of data points, resonance levels, and variables which can be handled simultaneously is only limited by the overall dimensions of two arrays in the program and by the stability of the matrix inversion. In a test problem seven transmissions each with 3750 data points were simultaneously fitted with 74 resonances and 110 variable parameters. The problem took 47 min of CPU time on an IBM-360/91, for 3 iterations. 3 figures, 2 tables.

  4. Kemari: A Portable High Performance Fortran System for Distributed Memory Parallel Processors

    Directory of Open Access Journals (Sweden)

    T. Kamachi

    1997-01-01

    Full Text Available We have developed a compilation system which extends High Performance Fortran (HPF in various aspects. We support the parallelization of well-structured problems with loop distribution and alignment directives similar to HPF's data distribution directives. Such directives give both additional control to the user and simplify the compilation process. For the support of unstructured problems, we provide directives for dynamic data distribution through user-defined mappings. The compiler also allows integration of message-passing interface (MPI primitives. The system is part of a complete programming environment which also comprises a parallel debugger and a performance monitor and analyzer. After an overview of the compiler, we describe the language extensions and related compilation mechanisms in detail. Performance measurements demonstrate the compiler's applicability to a variety of application classes.

  5. Installation of a new Fortran compiler and effective programming method on the vector supercomputer

    International Nuclear Information System (INIS)

    Nemoto, Toshiyuki; Suzuki, Koichiro; Watanabe, Kenji; Machida, Masahiko; Osanai, Seiji; Isobe, Nobuo; Harada, Hiroo; Yokokawa, Mitsuo

    1992-07-01

    The Fortran compiler, version 10 has been replaced with the new one, version 12 (V12) on the Fujitsu Computer system at JAERI since May, 1992. The benchmark test for the performance of the V12 compiler is carried out with 16 representative nuclear codes in advance of the installation of the compiler. The performance of the compiler is achieved by the factor of 1.13 in average. The effect of the enhanced functions of the compiler and the compatibility to the nuclear codes are also examined. The assistant tool for vectorization TOP10EX is developed. In this report, the results of the evaluation of the V12 compiler and the usage of the tools for vectorization are presented. (author)

  6. EFFDOS - a FORTRAN-77-code for the calculation of the effective dose equivalent

    International Nuclear Information System (INIS)

    Baer, M.; Honcu, S.; Huebschmann, W.

    1984-01-01

    The FORTRAN-77-code EFFDOS calculates the effective dose equivalent according to ICRP 26 due to the longterm emission of radionuclides into the atmosphere for the following exposure pathways: inhalation, ingestion, γ-ground irradiation (γ-irradiation by radionuclides deposited on the ground) and β- or γ-submersion (irradiation by the passing radioactive cloud). For calculating the effective dose equivalent at a single spot it is necessary to put in the diffusion factor and - if need be - the washout factor; otherwise EFFDOS calculates the input data for the computer codes ISOLA III and WOLGA-1, which then are enabled to compute the atmospheric diffusion, ground deposition and local dose equivalent distribution for the requested exposure pathway. Atmospheric diffusion, deposition and radionuclide transfer are calculated according to the ''Allgemeine Berechnungsgrundlage ....'' recommended by the German Fed. Ministry of Interior. A sample calculated is added. (orig.) [de

  7. ptchg: A FORTRAN program for point-charge calculations of electric field gradients (EFGs)

    Science.gov (United States)

    Spearing, Dane R.

    1994-05-01

    ptchg, a FORTRAN program, has been developed to calculate electric field gradients (EFG) around an atomic site in crystalline solids using the point-charge direct-lattice summation method. It uses output from the crystal structure generation program Atoms as its input. As an application of ptchg, a point-charge calculation of the EFG quadrupolar parameters around the oxygen site in SiO 2 cristobalite is demonstrated. Although point-charge calculations of electric field gradients generally are limited to ionic compounds, the computed quadrupolar parameters around the oxygen site in SiO 2 cristobalite, a highly covalent material, are in good agreement with the experimentally determined values from nuclear magnetic resonance (NMR) spectroscopy.

  8. Perbandingan Bubble Sort dengan Insertion Sort pada Bahasa Pemrograman C dan Fortran

    Directory of Open Access Journals (Sweden)

    Reina Reina

    2013-12-01

    Full Text Available Sorting is a basic algorithm studied by students of computer science major. Sorting algorithm is the basis of other algorithms such as searching algorithm, pattern matching algorithm. Bubble sort is a popular basic sorting algorithm due to its easiness to be implemented. Besides bubble sort, there is insertion sort. It is lesspopular than bubble sort because it has more difficult algorithm. This paper discusses about process time between insertion sort and bubble sort with two kinds of data. First is randomized data, and the second is data of descending list. Comparison of process time has been done in two kinds of programming language that is C programming language and FORTRAN programming language. The result shows that bubble sort needs more time than insertion sort does.

  9. Program NICOLET to integrate energy loss in superconducting coils. [In FORTRAN for CDC-6600

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, H.F.

    1978-08-01

    A voltage pickup coil, inductively coupled to the magnetic field of the superconducting coil under test, is connected so its output may be compared with the terminal voltage of the coil under test. The integrated voltage difference is indicative of the resistive volt-seconds. When multiplied with the main coil current, the volt-seconds yield the loss. In other words, a hysteresis loop is obtained if the integrated voltage difference phi = ..integral delta..Vdt is plotted as a function of the coil current, i. First, time functions of the two signals phi(t) and i(t) are recorded on a dual-trace digital oscilloscope, and these signals are then recorded on magnetic tape. On a CDC-6600, the recorded information is decoded and plotted, and the hysteresis loops are integrated by the set of FORTRAN programs NICOLET described in this report. 4 figures.

  10. A FORTRAN program for numerical solution of the Altarelli-Parisi equations by the Laguerre method

    International Nuclear Information System (INIS)

    Kumano, S.; Londergan, J.T.

    1992-01-01

    We review the Laguerre method for solving the Altarelli-Parisi equations. The Laguerre method allows one to expand quark/parton distributions and splitting functions in orthonormal polynomials. The desired quark distributions are themselves expanded in terms of evolution operators, and we derive the integrodifferential equations satisfied by the evolution operators. We give relevant equations for both flavor nonsinglet and singlet distributions, for both spin-independent and spin-dependent distributions. We discuss stability and accuracy of the results using this method. For intermediate values of Bjorken x (0.03< x<0.7), one can obtain accurate results with a modest number of Laguerre polynomials (N≅20); we discuss requirements for convergence also for the regions of large or small x. A FORTRAN program is provided which implements the Laguerre method; test results are given for both the spin-independent and spin-dependent cases. (orig.)

  11. A Linear Algebra Framework for Static High Performance Fortran Code Distribution

    Directory of Open Access Journals (Sweden)

    Corinne Ancourt

    1997-01-01

    Full Text Available High Performance Fortran (HPF was developed to support data parallel programming for single-instruction multiple-data (SIMD and multiple-instruction multiple-data (MIMD machines with distributed memory. The programmer is provided a familiar uniform logical address space and specifies the data distribution by directives. The compiler then exploits these directives to allocate arrays in the local memories, to assign computations to elementary processors, and to migrate data between processors when required. We show here that linear algebra is a powerful framework to encode HPF directives and to synthesize distributed code with space-efficient array allocation, tight loop bounds, and vectorized communications for INDEPENDENT loops. The generated code includes traditional optimizations such as guard elimination, message vectorization and aggregation, and overlap analysis. The systematic use of an affine framework makes it possible to prove the compilation scheme correct.

  12. Algorithm 589. SICEDR: a FORTRAN subroutine for improving the accuracy of computed matrix eigenvalues

    International Nuclear Information System (INIS)

    Dongarra, J.J.

    1982-01-01

    SICEDR is a FORTRAN subroutine for improving the accuracy of a computed real eigenvalue and improving or computing the associated eigenvector. It is first used to generate information during the determination of the eigenvalues by the Schur decomposition technique. In particular, the Schur decomposition technique results in an orthogonal matrix Q and an upper quasi-triangular matrix T, such that A = QTQ/sup T/. Matrices A, Q, and T and the approximate eigenvalue, say lambda, are then used in the improvement phase. SICEDR uses an iterative method similar to iterative improvement for linear systems to improve the accuracy of lambda and improve or compute the eigenvector x in O(n 2 ) work, where n is the order of the matrix A

  13. Scientific Programming with High Performance Fortran: A Case Study Using the xHPF Compiler

    Directory of Open Access Journals (Sweden)

    Eric De Sturler

    1997-01-01

    Full Text Available Recently, the first commercial High Performance Fortran (HPF subset compilers have appeared. This article reports on our experiences with the xHPF compiler of Applied Parallel Research, version 1.2, for the Intel Paragon. At this stage, we do not expect very High Performance from our HPF programs, even though performance will eventually be of paramount importance for the acceptance of HPF. Instead, our primary objective is to study how to convert large Fortran 77 (F77 programs to HPF such that the compiler generates reasonably efficient parallel code. We report on a case study that identifies several problems when parallelizing code with HPF; most of these problems affect current HPF compiler technology in general, although some are specific for the xHPF compiler. We discuss our solutions from the perspective of the scientific programmer, and presenttiming results on the Intel Paragon. The case study comprises three programs of different complexity with respect to parallelization. We use the dense matrix-matrix product to show that the distribution of arrays and the order of nested loops significantly influence the performance of the parallel program. We use Gaussian elimination with partial pivoting to study the parallelization strategy of the compiler. There are various ways to structure this algorithm for a particular data distribution. This example shows how much effort may be demanded from the programmer to support the compiler in generating an efficient parallel implementation. Finally, we use a small application to show that the more complicated structure of a larger program may introduce problems for the parallelization, even though all subroutines of the application are easy to parallelize by themselves. The application consists of a finite volume discretization on a structured grid and a nested iterative solver. Our case study shows that it is possible to obtain reasonably efficient parallel programs with xHPF, although the compiler

  14. SMMP v. 3.0—Simulating proteins and protein interactions in Python and Fortran

    Science.gov (United States)

    Meinke, Jan H.; Mohanty, Sandipan; Eisenmenger, Frank; Hansmann, Ulrich H. E.

    2008-03-01

    We describe a revised and updated version of the program package SMMP. SMMP is an open-source FORTRAN package for molecular simulation of proteins within the standard geometry model. It is designed as a simple and inexpensive tool for researchers and students to become familiar with protein simulation techniques. SMMP 3.0 sports a revised API increasing its flexibility, an implementation of the Lund force field, multi-molecule simulations, a parallel implementation of the energy function, Python bindings, and more. Program summaryTitle of program:SMMP Catalogue identifier:ADOJ_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADOJ_v3_0.html Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html Programming language used:FORTRAN, Python No. of lines in distributed program, including test data, etc.:52 105 No. of bytes in distributed program, including test data, etc.:599 150 Distribution format:tar.gz Computer:Platform independent Operating system:OS independent RAM:2 Mbytes Classification:3 Does the new version supersede the previous version?:Yes Nature of problem:Molecular mechanics computations and Monte Carlo simulation of proteins. Solution method:Utilizes ECEPP2/3, FLEX, and Lund potentials. Includes Monte Carlo simulation algorithms for canonical, as well as for generalized ensembles. Reasons for new version:API changes and increased functionality. Summary of revisions:Added Lund potential; parameters used in subroutines are now passed as arguments; multi-molecule simulations; parallelized energy calculation for ECEPP; Python bindings. Restrictions:The consumed CPU time increases with the size of protein molecule. Running time:Depends on the size of the simulated molecule.

  15. Enhanced Design Alternative IV

    International Nuclear Information System (INIS)

    Kramer, N.E.

    1999-01-01

    This report evaluates Enhanced Design Alternative (EDA) IV as part of the second phase of the License Application Design Selection (LADS) effort. The EDA IV concept was compared to the VA reference design using criteria from the Design Input Request for LADS Phase II EDA Evaluations (CRWMS M and O 1999b) and (CRWMS M and O 1999f). Briefly, the EDA IV concept arranges the waste packages close together in an emplacement configuration known as line load. Continuous pre-closure ventilation keeps the waste packages from exceeding their 350 C cladding and 200 C (4.3.6) drift wall temperature limits. This EDA concept keeps relatively high, uniform emplacement drift temperatures (post-closure) to drive water away from the repository and thus dry out the pillars between emplacement drifts. The waste package is shielded to permit human access to emplacement drifts and includes an integral filler inside the package to reduce the amount of water that can contact the waste form. Closure of the repository is desired 50 years after first waste is emplaced. Both backfill and drip shields will be emplaced at closure to improve post-closure performance. The EDA IV concept includes more defense-in-depth layers than the VA reference design because of its backfill, drip shield, waste package shielding, and integral filler features. These features contribute to the low dose-rate to the public achieved during the first 10,000 years of repository life as shown in Figure 3. Investigation of the EDA IV concept has led to the following general conclusions: (1) The total life cycle cost for EDA IV is about $21.7 billion which equates to a $11.3 billion net present value (both figures rounded up). (2) The incidence of design basis events for EDA IV is similar to the VA reference design. (3) The emplacement of the waste packages in drifts will be similar to the VA reference design. However, heavier equipment may be required because the shielded waste package will be heavier. (4) The heavier

  16. BGSUB and BGFIX: FORTRAN programs to correct Ge(Li) gamma-ray spectra for photopeaks from radionuclides in background

    International Nuclear Information System (INIS)

    Cutshall, N.H.; Larsen, I.L.

    1980-03-01

    Two FORTRAN programs which provide correction and error analysis for background photopeak contributions to low-level gamma-ray spectra are discussed. A peak-by-peak background subtraction approach is used instead of channel-by-channel correction. The accuracy of corrected results near background levels is substantially improved over uncorrected values

  17. A sputnik IV saga

    Science.gov (United States)

    Lundquist, Charles A.

    2009-12-01

    The Sputnik IV launch occurred on May 15, 1960. On May 19, an attempt to deorbit a 'space cabin' failed and the cabin went into a higher orbit. The orbit of the cabin was monitored and Moonwatch volunteer satellite tracking teams were alerted to watch for the vehicle demise. On September 5, 1962, several team members from Milwaukee, Wisconsin made observations starting at 4:49 a.m. of a fireball following the predicted orbit of Sputnik IV. Requests went out to report any objects found under the fireball path. An early morning police patrol in Manitowoc had noticed a metal object on a street and had moved it to the curb. Later the officers recovered the object and had it dropped off at the Milwaukee Journal. The Moonwarch team got the object and reported the situation to Moonwatch Headquarters at the Smithsonian Astrophysical Observatory. A team member flew to Cambridge with the object. It was a solid, 9.49 kg piece of steel with a slag-like layer attached to it. Subsequent analyses showed that it contained radioactive nuclei produced by cosmic ray exposure in space. The scientists at the Observatory quickly recognized that measurements of its induced radioactivity could serve as a calibration for similar measurements of recently fallen nickel-iron meteorites. Concurrently, the Observatory directorate informed government agencies that a fragment from Sputnik IV had been recovered. Coincidently, a debate in the UN Committee on Peaceful Uses of Outer Space involved the issue of liability for damage caused by falling satellite fragments. On September 12, the Observatory delivered the bulk of the fragment to the US Delegation to the UN. Two days later, the fragment was used by US Ambassador Francis Plimpton as an exhibit that the time had come to agree on liability for damage from satellite debris. He offered the Sputnik IV fragment to USSR Ambassador P.D. Morozov, who refused the offer. On October 23, Drs. Alla Massevitch and E.K. Federov of the USSR visited the

  18. MATH77 - A LIBRARY OF MATHEMATICAL SUBPROGRAMS FOR FORTRAN 77, RELEASE 4.0

    Science.gov (United States)

    Lawson, C. L.

    1994-01-01

    MATH77 is a high quality library of ANSI FORTRAN 77 subprograms implementing contemporary algorithms for the basic computational processes of science and engineering. The portability of MATH77 meets the needs of present-day scientists and engineers who typically use a variety of computing environments. Release 4.0 of MATH77 contains 454 user-callable and 136 lower-level subprograms. Usage of the user-callable subprograms is described in 69 sections of the 416 page users' manual. The topics covered by MATH77 are indicated by the following list of chapter titles in the users' manual: Mathematical Functions, Pseudo-random Number Generation, Linear Systems of Equations and Linear Least Squares, Matrix Eigenvalues and Eigenvectors, Matrix Vector Utilities, Nonlinear Equation Solving, Curve Fitting, Table Look-Up and Interpolation, Definite Integrals (Quadrature), Ordinary Differential Equations, Minimization, Polynomial Rootfinding, Finite Fourier Transforms, Special Arithmetic , Sorting, Library Utilities, Character-based Graphics, and Statistics. Besides subprograms that are adaptations of public domain software, MATH77 contains a number of unique packages developed by the authors of MATH77. Instances of the latter type include (1) adaptive quadrature, allowing for exceptional generality in multidimensional cases, (2) the ordinary differential equations solver used in spacecraft trajectory computation for JPL missions, (3) univariate and multivariate table look-up and interpolation, allowing for "ragged" tables, and providing error estimates, and (4) univariate and multivariate derivative-propagation arithmetic. MATH77 release 4.0 is a subroutine library which has been carefully designed to be usable on any computer system that supports the full ANSI standard FORTRAN 77 language. It has been successfully implemented on a CRAY Y/MP computer running UNICOS, a UNISYS 1100 computer running EXEC 8, a DEC VAX series computer running VMS, a Sun4 series computer running Sun

  19. Thermal Hydraulic Fortran Program for Steady State Calculations of Plate Type Fuel Research Reactors

    International Nuclear Information System (INIS)

    Khedr, H.

    2008-01-01

    The safety assessment of Research and Power Reactors is a continuous process over their life and that requires verified and validated codes. Power Reactor codes all over the world are well established and qualified against a real measuring data and qualified experimental facilities. These codes are usually sophisticated, require special skills and consume much more running time. On the other hand, most of the Research Reactor codes still requiring more data for validation and qualification. Therefore it is benefit for a regulatory body and the companies working in the area of Research Reactor assessment and design to have their own program that give them a quick judgment. The present paper introduces a simple one dimensional Fortran program called THDSN for steady state best estimate Thermal Hydraulic (TH) calculations of plate type fuel RRs. Beside calculating the fuel and coolant temperature distribution and pressure gradient in an average and hot channel the program calculates the safety limits and margins against the critical phenomena encountered in RR such as the burnout heat flux and the onset of flow instability. Well known TH correlations for calculating the safety parameters are used. THDSN program is verified by comparing its results for 2 and 10 MW benchmark reactors with that published in IAEA publications and good agreement is found. Also the program results are compared with those published for other programs such as PARET and TERMIC. An extension for this program is underway to cover the transient TH calculations

  20. A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials

    International Nuclear Information System (INIS)

    Raynal, J.

    1963-01-01

    The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [fr

  1. Performance Issues in High Performance Fortran Implementations of Sensor-Based Applications

    Directory of Open Access Journals (Sweden)

    David R. O'hallaron

    1997-01-01

    Full Text Available Applications that get their inputs from sensors are an important and often overlooked application domain for High Performance Fortran (HPF. Such sensor-based applications typically perform regular operations on dense arrays, and often have latency and through put requirements that can only be achieved with parallel machines. This article describes a study of sensor-based applications, including the fast Fourier transform, synthetic aperture radar imaging, narrowband tracking radar processing, multibaseline stereo imaging, and medical magnetic resonance imaging. The applications are written in a dialect of HPF developed at Carnegie Mellon, and are compiled by the Fx compiler for the Intel Paragon. The main results of the study are that (1 it is possible to realize good performance for realistic sensor-based applications written in HPF and (2 the performance of the applications is determined by the performance of three core operations: independent loops (i.e., loops with no dependences between iterations, reductions, and index permutations. The article discusses the implications for HPF implementations and introduces some simple tests that implementers and users can use to measure the efficiency of the loops, reductions, and index permutations generated by an HPF compiler.

  2. Dynamic Memory De-allocation in Fortran 95/2003 Derived Type Calculus

    Directory of Open Access Journals (Sweden)

    Damian W.I. Rouson

    2005-01-01

    Full Text Available Abstract data types developed for computational science and engineering are frequently modeled after physical objects whose state variables must satisfy governing differential equations. Generalizing the associated algebraic and differential operators to operate on the abstract data types facilitates high-level program constructs that mimic standard mathematical notation. For non-trivial expressions, multiple object instantiations must occur to hold intermediate results during the expression's evaluation. When the dimension of each object's state space is not specified at compile-time, the programmer becomes responsible for dynamically allocating and de-allocating memory for each instantiation. With the advent of allocatable components in Fortran 2003 derived types, the potential exists for these intermediate results to occupy a substantial fraction of a program's footprint in memory. This issue becomes particularly acute at the highest levels of abstraction where coarse-grained data structures predominate. This paper proposes a set of rules for de-allocating memory that has been dynamically allocated for intermediate results in derived type calculus, while distinguishing that memory from more persistent objects. The new rules are applied to the design of a polymorphic time integrator for integrating evolution equations governing dynamical systems. Associated issues of efficiency and design robustness are discussed.

  3. Users manual for an expert system (HSPEXP) for calibration of the hydrological simulation program; Fortran

    Science.gov (United States)

    Lumb, A.M.; McCammon, R.B.; Kittle, J.L.

    1994-01-01

    Expert system software was developed to assist less experienced modelers with calibration of a watershed model and to facilitate the interaction between the modeler and the modeling process not provided by mathematical optimization. A prototype was developed with artificial intelligence software tools, a knowledge engineer, and two domain experts. The manual procedures used by the domain experts were identified and the prototype was then coded by the knowledge engineer. The expert system consists of a set of hierarchical rules designed to guide the calibration of the model through a systematic evaluation of model parameters. When the prototype was completed and tested, it was rewritten for portability and operational use and was named HSPEXP. The watershed model Hydrological Simulation Program--Fortran (HSPF) is used in the expert system. This report is the users manual for HSPEXP and contains a discussion of the concepts and detailed steps and examples for using the software. The system has been tested on watersheds in the States of Washington and Maryland, and the system correctly identified the model parameters to be adjusted and the adjustments led to improved calibration.

  4. FORTRAN routines for calculating water thermodynamic properties for use in transient thermal-hydraulics codes

    International Nuclear Information System (INIS)

    Green, C.

    1979-12-01

    A set of FORTRAN subroutines is described for calculating water thermodynamic properties. These were written for use in a transient thermal-hydraulics program, where speed of execution is paramount. The choice of which subroutines to optimise depends on the primary variables in the thermal-hydraulics code. In this particular case the subroutine which has been optimised is the one which calculates pressure and specific enthalpy given the specific volume and the specific internal energy. Another two subroutines are described which complete a self-consistent set. These calculate the specific volume and the temperature given the pressure and the specific enthalpy, and the specific enthalpy and the specific volume given the pressure and the temperature (or the quality). The accuracy is high near the saturation lines, typically less than 1% relative error, and decreases as the fluid becomes more subcooled in the liquid region or more superheated in the steam region. This behaviour is inherent in the method which uses quantities defined on the saturation lines and assumes that certain derivatives are constant for excursions away from these saturation lines. The accuracy and speed of the subroutines are discussed in detail in this report. (author)

  5. ISOLA II: a FORTRAN IV program for the calculation of long-term dose distribution in the vicinity of nuclear installations

    International Nuclear Information System (INIS)

    Huebschmann, W.; Nagel, D.

    The computer code ISOLA serves for the annual calculation of the radiation burden of the environment of the Nuclear Research Center at Karlsruhe resulting from the release of alpha-active and beta-active off-gases. In the improved version ISOLA II the model of a double Gaussian Distribution function is strictly-maintained, so that the influence due to neighboring sectors is included. The emissions are assumed to be constant in time during a given time period. The user may select either the print-out of an isodose map for a desired area (for example a map square 20 km on each edge) or he may obtain a list of doses for up to 2000 filed points (for example in the surrounding communities). The input and output forms will be shown by the use of an example

  6. HADA. A FORTRAN-IV program for the thermohydraulic design of an advanced pressurized light water reactor with a tight fuel rod lattice

    International Nuclear Information System (INIS)

    Dalle Donne, M.

    1985-03-01

    For the user of the program the input data are described in detail. Two sample runs demonstrate the usage of the program and the output. In addition to the description of the physical background given in KfK 3453, the provided and used solution algorithms are explained. In the last chapters the utility programs are described and an installation guide for the program system is listed. (orig.) [de

  7. ISOLA II - A FORTRAN IV code for the calculation of the long-term α- and β-dose distributions in the vicinity of nuclear installations

    International Nuclear Information System (INIS)

    Huebschmann, W.; Nagel, D.

    1975-12-01

    The computer code ISOLA is used to calculate the annual radiation doses caused by α- and β-active off-gases in the environment of the Karlsruhe Nuclear Research Center. In the revised version ISOLA II the double Gaussian distribution model is strictly observed. As a consequence, the contribution of activity from neighbour sectors is taken into account. Up to 15 emitters may be coped with simultaneously. The emission rates are considered to be constant during the given time interval. Optionally either the isodoses chart of a specified area (for instance a square 20 by 20 km) or a list of doses calculated at up to 2,000 locations (for instance the living areas) in the environment may be set up. Input and output are shown for a specific case. (orig.) [de

  8. ASSIST - a package of Fortran routines for handling input under specified syntax rules and for management of data structures

    International Nuclear Information System (INIS)

    Sinclair, J.E.

    1991-02-01

    The ASSIST package (A Structured Storage and Input Syntax Tool) provides for Fortran programs a means for handling data structures more general than those provided by the Fortran language, and for obtaining input to the program from a file or terminal according to specified syntax rules. The syntax-controlled input can be interactive, with automatic generation of prompts, and dialogue to correct any input errors. The range of syntax rules possible is sufficient to handle lists of numbers and character strings, keywords, commands with optional clauses, and many kinds of variable-format constructions, such as algebraic expressions. ASSIST was developed for use in two large programs for the analysis of safety of radioactive waste disposal facilities, but it should prove useful for a wide variety of applications. (author)

  9. A Fortran program for the numerical integration of the one-dimensional Schroedinger equation using exponential and Bessel fitting methods

    International Nuclear Information System (INIS)

    Cash, J.R.; Raptis, A.D.; Simos, T.E.

    1990-01-01

    An efficient algorithm is described for the accurate numerical integration of the one-dimensional Schroedinger equation. This algorithm uses a high-order, variable step Runge-Kutta like method in the region where the potential term dominates, and an exponential or Bessel fitted method in the asymptotic region. This approach can be used to compute scattering phase shifts in an efficient and reliable manner. A Fortran program which implements this algorithm is provided and some test results are given. (orig.)

  10. Hepatic imaging in stage IV-S neuroblastoma

    International Nuclear Information System (INIS)

    Franken, E.A. Jr.; Smith, W.L.; Iowa Univ., Iowa City; Cohen, M.D.; Kisker, C.T.; Platz, C.E.

    1986-01-01

    Stage IV-S neuroblastoma describes a group of infants with tumor spread limited to liver, skin, or bone marrow. Such patients, who constitute about 25% of affected infants with neuroblastoma, may expect spontaneous tumor remission. We report 18 infants with Stage IV-S neuroblastoma, 83% of whom had liver involvement. Imaging investigations included Technetium 99m sulfur colloid scan, ultrasound, and CT. Two patterns of liver metastasis were noted: ill-defined nodules or diffuse tumor throughout the liver. Distinction of normal and abnormal liver with diffuse type metastasis could be quite difficult, particularly with liver scans. We conclude that patients with Stage IV-S neuroblastoma have ultrasound or CT examination as an initial workup, with nuclear medicine scans reserved for followup studies. (orig.)

  11. Diaquatetrabromidotin(IV trihydrate

    Directory of Open Access Journals (Sweden)

    Fei Ye

    2012-09-01

    Full Text Available The title compound, [SnBr4(H2O2]·3H2O, forms large colourless crystals in originally sealed samples of tin tetrabromide. It constitutes the first structurally characterized hydrate of SnBr4 and is isostructural with the corresponding hydrate of SnCl4. It is composed of SnIV atoms octahedrally coordinated by four Br atoms and two cis-related water molecules. The octahedra exhibit site symmetry 2. They are arranged into columns along [001] via medium–strong O—H...O hydrogen bonds involving the two lattice water molecules (one situated on a twofold rotation axis while the chains are interconnected via longer O—H...Br hydrogen bonds, forming a three-dimensional network.

  12. Cyclopentadienyluranium(IV) acetylacetonates

    International Nuclear Information System (INIS)

    Bagnall, K.W.; Edwards, J.; Rickard, C.E.F.; Tempest, A.C.

    1979-01-01

    Cyclopentadienyluranium(IV) acetylacetonate complexes, (eta 5 C 5 H 5 )UClsub(3-x)(acac)sub(x), where x = 1 or 2, and the corresponding bis triphenylphosphine oxide (tppo) complexes have been prepared. The bis cyclopentadienyl complexes, (eta 5 C 5 H 5 ) 2 U(acac) 2 and (eta 5 C 5 H 5 ) 2 UCl(acac)(tppo) 2 have also been prepared and are stable with respect to disproportionation, whereas (eta 5 C 5 H 5 ) 2 UCl(acac) is not. The IR and UV/visible spectra of the complexes are reported, together with some additional information on the UCl 2 (acac) 2 thf and -tppo systems. (author)

  13. Application of Pfortran and Co-Array Fortran in the Parallelization of the GROMOS96 Molecular Dynamics Module

    Directory of Open Access Journals (Sweden)

    Piotr Bała

    2001-01-01

    Full Text Available After at least a decade of parallel tool development, parallelization of scientific applications remains a significant undertaking. Typically parallelization is a specialized activity supported only partially by the programming tool set, with the programmer involved with parallel issues in addition to sequential ones. The details of concern range from algorithm design down to low-level data movement details. The aim of parallel programming tools is to automate the latter without sacrificing performance and portability, allowing the programmer to focus on algorithm specification and development. We present our use of two similar parallelization tools, Pfortran and Cray's Co-Array Fortran, in the parallelization of the GROMOS96 molecular dynamics module. Our parallelization started from the GROMOS96 distribution's shared-memory implementation of the replicated algorithm, but used little of that existing parallel structure. Consequently, our parallelization was close to starting with the sequential version. We found the intuitive extensions to Pfortran and Co-Array Fortran helpful in the rapid parallelization of the project. We present performance figures for both the Pfortran and Co-Array Fortran parallelizations showing linear speedup within the range expected by these parallelization methods.

  14. BADGER v1.0: A Fortran equation of state library

    Science.gov (United States)

    Heltemes, T. A.; Moses, G. A.

    2012-12-01

    The BADGER equation of state library was developed to enable inertial confinement fusion plasma codes to more accurately model plasmas in the high-density, low-temperature regime. The code had the capability to calculate 1- and 2-T plasmas using the Thomas-Fermi model and an individual electron accounting model. Ion equation of state data can be calculated using an ideal gas model or via a quotidian equation of state with scaled binding energies. Electron equation of state data can be calculated via the ideal gas model or with an adaptation of the screened hydrogenic model with ℓ-splitting. The ionization and equation of state calculations can be done in local thermodynamic equilibrium or in a non-LTE mode using a variant of the Busquet equivalent temperature method. The code was written as a stand-alone Fortran library for ease of implementation by external codes. EOS results for aluminum are presented that show good agreement with the SESAME library and ionization calculations show good agreement with the FLYCHK code. Program summaryProgram title: BADGERLIB v1.0 Catalogue identifier: AEND_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEND_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 41 480 No. of bytes in distributed program, including test data, etc.: 2 904 451 Distribution format: tar.gz Programming language: Fortran 90. Computer: 32- or 64-bit PC, or Mac. Operating system: Windows, Linux, MacOS X. RAM: 249.496 kB plus 195.630 kB per isotope record in memory Classification: 19.1, 19.7. Nature of problem: Equation of State (EOS) calculations are necessary for the accurate simulation of high energy density plasmas. Historically, most EOS codes used in these simulations have relied on an ideal gas model. This model is inadequate for low

  15. KUEBEL. A Fortran program for computation of cooling-agent-distribution within reactor fuel-elements

    International Nuclear Information System (INIS)

    Inhoven, H.

    1984-12-01

    KUEBEL is a Fortran-program for computation of cooling-agent-distribution within reactor fuel-elements or -zones of theirs. They may be assembled of max. 40 cooling-channels with laminar up to turbulent type of flow (respecting Reynolds' coefficients up to 2.0E+06) at equal pressure loss. Flow-velocity, dynamic flow-, contraction- and friction-losses will be calculated for each channel and for the total zone. Other computations will present mean heat-up of cooling-agent, mean outlet-temperature of the core, boiling-temperature and absolute pressure at flow-outlet. All characteristic coolant-values, including the factor of safety for flow-instability of the most-loaded cooling gap are computed by 'KUEBEL' too. Absolute pressure at flow-outlet or is-factor may be defined as dependent or independent variables of the program alternatively. In latter case 3 variations of solution will be available: Adapted flow of cooling-agent, inlet-temperature of the core and thermal power. All calculations can be done alternatively with variation of parameters: flow of cooling-agent, inlet-temperature of the core and thermal power, which are managed by the program itself. 'KUEBEL' is able to distinguish light- and heavy-water coolant, flow-direction of coolant and fuel elements with parallel, rectangular, respectively concentric, cylindrical shape of their gaps. Required material specifics are generated by the program. Segments of fuel elements or constructively unconnected gaps can also be computed by means of interposition of S.C. 'phantom channels'. (orig.) [de

  16. Multi-processing CTH: Porting legacy FORTRAN code to MP hardware

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.L.; Elrick, M.G.; Hertel, E.S. Jr.

    1996-12-31

    CTH is a family of codes developed at Sandia National Laboratories for use in modeling complex multi-dimensional, multi-material problems that are characterized by large deformations and/or strong shocks. A two-step, second-order accurate Eulerian solution algorithm is used to solve the mass, momentum, and energy conservation equations. CTH has historically been run on systems where the data are directly accessible to the cpu, such as workstations and vector supercomputers. Multiple cpus can be used if all data are accessible to all cpus. This is accomplished by placing compiler directives or subroutine calls within the source code. The CTH team has implemented this scheme for Cray shared memory machines under the Unicos operating system. This technique is effective, but difficult to port to other (similar) shared memory architectures because each vendor has a different format of directives or subroutine calls. A different model of high performance computing is one where many (> 1,000) cpus work on a portion of the entire problem and communicate by passing messages that contain boundary data. Most, if not all, codes that run effectively on parallel hardware were written with a parallel computing paradigm in mind. Modifying an existing code written for serial nodes poses a significantly different set of challenges that will be discussed. CTH, a legacy FORTRAN code, has been modified to allow for solutions on distributed memory parallel computers such as the IBM SP2, the Intel Paragon, Cray T3D, or a network of workstations. The message passing version of CTH will be discussed and example calculations will be presented along with performance data. Current timing studies indicate that CTH is 2--3 times faster than equivalent C++ code written specifically for parallel hardware. CTH on the Intel Paragon exhibits linear speed up with problems that are scaled (constant problem size per node) for the number of parallel nodes.

  17. Congenital bilateral neuroblastoma (stage IV-S): case report

    International Nuclear Information System (INIS)

    Lee, Jeong Hee; Lee, Hee Jung; Woo, Seong Ku; Lee, Sang Rak; Kim, Heung Sik

    2002-01-01

    Congenital neonatal neuroblastoma is not uncommon but bilateral adrenal neuroblastoma is rare, accounting for about ten percent of neuroblastomas in children. We report the US the MR findings of a stage IV-S congenital bilateral neuroblastoma occurring in a one-day-old neonate

  18. Glycogen Storage Disease Type IV

    DEFF Research Database (Denmark)

    Bendroth-Asmussen, Lisa; Aksglaede, Lise; Gernow, Anne B

    2016-01-01

    molecular genetic analyses confirmed glycogen storage disease Type IV with the finding of compound heterozygosity for 2 mutations (c.691+2T>C and c.1570C>T, p.R524X) in the GBE1 gene. We conclude that glycogen storage disease Type IV can cause early miscarriage and that diagnosis can initially be made...

  19. TSPP - A Collection of FORTRAN Programs for Processing and Manipulating Time Series

    Science.gov (United States)

    Boore, David M.

    2008-01-01

    This report lists a number of FORTRAN programs that I have developed over the years for processing and manipulating strong-motion accelerograms. The collection is titled TSPP, which stands for Time Series Processing Programs. I have excluded 'strong-motion accelerograms' from the title, however, as the boundary between 'strong' and 'weak' motion has become blurred with the advent of broadband sensors and high-dynamic range dataloggers, and many of the programs can be used with any evenly spaced time series, not just acceleration time series. This version of the report is relatively brief, consisting primarily of an annotated list of the programs, with two examples of processing, and a few comments on usage. I do not include a parameter-by-parameter guide to the programs. Future versions might include more examples of processing, illustrating the various parameter choices in the programs. Although these programs have been used by the U.S. Geological Survey, no warranty, expressed or implied, is made by the USGS as to the accuracy or functioning of the programs and related program material, nor shall the fact of distribution constitute any such warranty, and no responsibility is assumed by the USGS in connection therewith. The programs are distributed on an 'as is' basis, with no warranty of support from me. These programs were written for my use and are being publically distributed in the hope that others might find them as useful as I have. I would, however, appreciate being informed about bugs, and I always welcome suggestions for improvements to the codes. Please note that I have made little effort to optimize the coding of the programs or to include a user-friendly interface (many of the programs in this collection have been included in the software usdp (Utility Software for Data Processing), being developed by Akkar et al. (personal communication, 2008); usdp includes a graphical user interface). Speed of execution has been sacrificed in favor of a code that

  20. FORTRAN Code for Glandular Dose Calculation in Mammography Using Sobol-Wu Parameters

    Directory of Open Access Journals (Sweden)

    Mowlavi A A

    2007-07-01

    Full Text Available Background: Accurate computation of the radiation dose to the breast is essential to mammography. Various the thicknesses of breast, the composition of the breast tissue and other variables affect the optimal breast dose. Furthermore, the glandular fraction, which refers to the composition of the breasts, as partitioned between radiation-sensitive glandular tissue and the adipose tissue, also has an effect on this calculation. Fatty or fibrous breasts would have a lower value for the glandular fraction than dense breasts. Breast tissue composed of half glandular and half adipose tissue would have a glandular fraction in between that of fatty and dense breasts. Therefore, the use of a computational code for average glandular dose calculation in mammography is a more effective means of estimating the dose of radiation, and is accurate and fast. Methods: In the present work, the Sobol-Wu beam quality parameters are used to write a FORTRAN code for glandular dose calculation in molybdenum anode-molybdenum filter (Mo-Mo, molybdenum anode-rhodium filter (Mo-Rh and rhodium anode-rhodium filter (Rh-Rh target-filter combinations in mammograms. The input parameters of code are: tube voltage in kV, half-value layer (HVL of the incident x-ray spectrum in mm, breast thickness in cm (d, and glandular tissue fraction (g. Results: The average glandular dose (AGD variation against the voltage of the mammogram X-ray tube for d = 4 cm, HVL = 0.34 mm Al and g=0.5 for the three filter-target combinations, as well as its variation against the glandular fraction of breast tissue for kV=25, HVL=0.34, and d=4 cm has been calculated. The results related to the average glandular absorbed dose variation against HVL for kV = 28, d=4 cm and g= 0.6 are also presented. The results of this code are in good agreement with those previously reported in the literature. Conclusion: The code developed in this study calculates the glandular dose quickly, and it is complete and

  1. About the structure and stability of complex carbonates of thorium (IV), cerium (IV), zirconium (IV), hafnium (IV)

    International Nuclear Information System (INIS)

    Dervin, Jacqueline

    1972-01-01

    This research thesis addressed the study of complex carbonates of cations of metals belonging to the IV A column, i.e. thorium (IV), zirconium (IV), hafnium (IV), and also cerium (IV) and uranium (VI), and more particularly focused on ionic compounds formed in solution, and also on the influence of concentration and nature of cations on stability and nature of the formed solid. The author first presents methods used in this study, discusses their precision and scope of validity. She reports the study of the formation of different complex ions which have been highlighted in solution, and the determination of their formation constants. She reports the preparation and study of the stability domain of solid complexes. The next part reports the use of thermogravimetric analysis, IR spectrometry, and crystallography for the structural study of these compounds

  2. OpenMP GNU and Intel Fortran programs for solving the time-dependent Gross-Pitaevskii equation

    Science.gov (United States)

    Young-S., Luis E.; Muruganandam, Paulsamy; Adhikari, Sadhan K.; Lončar, Vladimir; Vudragović, Dušan; Balaž, Antun

    2017-11-01

    We present Open Multi-Processing (OpenMP) version of Fortran 90 programs for solving the Gross-Pitaevskii (GP) equation for a Bose-Einstein condensate in one, two, and three spatial dimensions, optimized for use with GNU and Intel compilers. We use the split-step Crank-Nicolson algorithm for imaginary- and real-time propagation, which enables efficient calculation of stationary and non-stationary solutions, respectively. The present OpenMP programs are designed for computers with multi-core processors and optimized for compiling with both commercially-licensed Intel Fortran and popular free open-source GNU Fortran compiler. The programs are easy to use and are elaborated with helpful comments for the users. All input parameters are listed at the beginning of each program. Different output files provide physical quantities such as energy, chemical potential, root-mean-square sizes, densities, etc. We also present speedup test results for new versions of the programs. Program files doi:http://dx.doi.org/10.17632/y8zk3jgn84.2 Licensing provisions: Apache License 2.0 Programming language: OpenMP GNU and Intel Fortran 90. Computer: Any multi-core personal computer or workstation with the appropriate OpenMP-capable Fortran compiler installed. Number of processors used: All available CPU cores on the executing computer. Journal reference of previous version: Comput. Phys. Commun. 180 (2009) 1888; ibid.204 (2016) 209. Does the new version supersede the previous version?: Not completely. It does supersede previous Fortran programs from both references above, but not OpenMP C programs from Comput. Phys. Commun. 204 (2016) 209. Nature of problem: The present Open Multi-Processing (OpenMP) Fortran programs, optimized for use with commercially-licensed Intel Fortran and free open-source GNU Fortran compilers, solve the time-dependent nonlinear partial differential (GP) equation for a trapped Bose-Einstein condensate in one (1d), two (2d), and three (3d) spatial dimensions for

  3. METHUSELAH II - A Fortran program and nuclear data library for the physics assessment of liquid-moderated reactors

    International Nuclear Information System (INIS)

    Brinkworth, M.J.; Griffiths, J.A.

    1966-03-01

    METHUSELAH II is a Fortran program with a nuclear data library, used to calculate cell reactivity and burn-up in liquid-moderated reactors. It has been developed from METHUSELAH I by revising the nuclear data library, and by introducing into the program improvements relating to nuclear data, improvements in efficiency and accuracy, and additional facilities which include a neutron balance edit, specialised outputs, fuel cycling, and fuel costing. These developments are described and information is given on the coding and usage of versions of METHUSELAH II for the IBM 7030 (STRETCH), IBM 7090, and KDF9 computers. (author)

  4. HAUFES : a FORTRAN code for the calculation of compound nuclear cross-sections by Hauser-Feshbach theory

    International Nuclear Information System (INIS)

    Viyogi, Y.P.; Ganguly, N.K.

    1975-01-01

    The FORTRAN code described in the report has been developed for the BESM-6 computer with a view to calculate the cross-section of reactions proceeding via the formation of compound nucleus for all open two-body reaction channels using Hauser-Feshbach theory with Moldauer's correction for the fluctuation of level widths. The code can also be used to analyse data from 'crystal blocking' experiments to obtain nuclear level densities. The report describes the input-output specifications along with a short account of the algorithm of the program. (author)

  5. DATA-ENTRY-3: some observations and pragmatics of a structured design. [In FORTRAN for PDP-11/10

    Energy Technology Data Exchange (ETDEWEB)

    Sparks, D.

    1977-08-01

    The FORTRAN program DATA-ENTRY-3 was developed from the COBOL program DATA-ENTRY-1, which solves a large class of elementary data-capture, data-formating, and data-editing problems of managerial accounting. Most of the work involved finding methods to make DATA-ENTRY-3, which is written for a small-machine environment (PDP-11/10 under the RT-11 operating system), logically equivalent to DATA-ENTRY-1, which is written for a large-machine environment (CDC 6600 under a time-sharing operating system). This report explains how structured programing helped, and briefly describes the function of each subroutine.

  6. EDDY - a FORTRAN program to extract significant features from eddy-current test data - the basis of the CANSCAN system

    International Nuclear Information System (INIS)

    Jarvis, R.G.; Cranston, R.J.

    1982-09-01

    The FORTRAN program EDDY is designed to analyse data: from eddy-current scans of steam generator tubes. It is written in modular form, for future development, and it uses signal-recognition techniques that the authors developed in the profilometry of irradiated fuel elements. During a scan, significant signals are detected and extracted for immediate attention or more detailed analysis later. A version of the program was used in the CANSCAN system 'for automated eddy-current in-service inspection of nuclear steam generator tubing'

  7. Direct Bandgap Group IV Materials

    Science.gov (United States)

    2016-01-21

    AFRL-AFOSR-JP-TR-2017-0049 Direct Bandgap group IV Materials Hung Hsiang Cheng NATIONAL TAIWAN UNIVERSITY Final Report 01/21/2016 DISTRIBUTION A...NAME(S) AND ADDRESS(ES) NATIONAL TAIWAN UNIVERSITY 1 ROOSEVELT RD. SEC. 4 TAIPEI CITY, 10617 TW 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING...14. ABSTRACT Direct bandgap group IV materials have been long sought for in both academia and industry for the implementation of photonic devices

  8. Formula Translation in Blitz++, NumPy and Modern Fortran: A Case Study of the Language Choice Tradeoffs

    Directory of Open Access Journals (Sweden)

    Sylwester Arabas

    2014-01-01

    Full Text Available Three object-oriented implementations of a prototype solver of the advection equation are introduced. The presented programs are based on Blitz++ (C++, NumPy (Python and Fortran's built-in array containers. The solvers constitute implementations of the Multidimensional Positive-Definite Advective Transport Algorithm (MPDATA. The introduced codes serve as examples for how the application of object-oriented programming (OOP techniques and new language constructs from C++11 and Fortran 2008 allow to reproduce the mathematical notation used in the literature within the program code. A discussion on the tradeoffs of the programming language choice is presented. The main angles of comparison are code brevity and syntax clarity (and hence maintainability and auditability as well as performance. All performance tests are carried out using free and open-source compilers. In the case of Python, a significant performance gain is observed when switching from the standard interpreter (CPython to the PyPy implementation of Python. Entire source code of all three implementations is embedded in the text and is licensed under the terms of the GNU GPL license.

  9. Far-Field Lorenz-Mie Scattering in an Absorbing Host Medium: Theoretical Formalism and FORTRAN Program

    Science.gov (United States)

    Mishchenko, Michael I.; Yang, Ping

    2018-01-01

    In this paper we make practical use of the recently developed first-principles approach to electromagnetic scattering by particles immersed in an unbounded absorbing host medium. Specifically, we introduce an actual computational tool for the calculation of pertinent far-field optical observables in the context of the classical Lorenzâ€"Mie theory. The paper summarizes the relevant theoretical formalism, explains various aspects of the corresponding numerical algorithm, specifies the input and output parameters of a FORTRAN program available at https://www.giss.nasa.gov/staff/mmishchenko/Lorenz-Mie.html, and tabulates benchmark results useful for testing purposes. This public-domain FORTRAN program enables one to solve the following two important problems: (i) simulate theoretically the reading of a remote well-collimated radiometer measuring electromagnetic scattering by an individual spherical particle or a small random group of spherical particles; and (ii) compute the single-scattering parameters that enter the vector radiative transfer equation derived directly from the Maxwell equations.

  10. Far-field Lorenz-Mie scattering in an absorbing host medium: Theoretical formalism and FORTRAN program

    Science.gov (United States)

    Mishchenko, Michael I.; Yang, Ping

    2018-01-01

    In this paper we make practical use of the recently developed first-principles approach to electromagnetic scattering by particles immersed in an unbounded absorbing host medium. Specifically, we introduce an actual computational tool for the calculation of pertinent far-field optical observables in the context of the classical Lorenz-Mie theory. The paper summarizes the relevant theoretical formalism, explains various aspects of the corresponding numerical algorithm, specifies the input and output parameters of a FORTRAN program available at https://www.giss.nasa.gov/staff/mmishchenko/Lorenz-Mie.html, and tabulates benchmark results useful for testing purposes. This public-domain FORTRAN program enables one to solve the following two important problems: (i) simulate theoretically the reading of a remote well-collimated radiometer measuring electromagnetic scattering by an individual spherical particle or a small random group of spherical particles; and (ii) compute the single-scattering parameters that enter the vector radiative transfer equation derived directly from the Maxwell equations.

  11. The fortran programme for the calculation of the absorption and double scattering corrections in cross-section measurements with fast neutrons using the monte Carlo method (1963); Programme fortran pour le calcul des corrections d'absorption et de double diffusion dans les mesures de sections efficaces pour les neutrons rapides par la methode de monte-carlo (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    A calculation for double scattering and absorption corrections in fast neutron scattering experiments using Monte-Carlo method is given. Application to cylindrical target is presented in FORTRAN symbolic language. (author) [French] Un calcul des corrections de double diffusion et d'absorption dans les experiences de diffusion de neutrons rapides par la methode de Monte-Carlo est presente. L'application au cas d'une cible cylindrique est traitee en langage symbolique FORTRAN. (auteur)

  12. Determination of plateau slope and activity using filter measurement results and W. Chauvenet's criterion (Mage II and Fortran IV calculation programmes); Determination de pente de palier et d'activite a partir de resultats de mesure filtres selon le critere de W. Chauvenet (programmes de calcul en Mage II et Fortran IV)

    Energy Technology Data Exchange (ETDEWEB)

    Becker, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires, Departement d' Electronique Generale, Laboratoire de Metrologie de la Radioactivite

    1967-10-01

    In order to permit (at least partially) the objective comparison of plateau characteristics of gas-ionisation counters, plateaus which are obtained when each radioactive sample from normal LMR production is measured, a programme has been drawn up (on an electronic computer) comprising a processing section using least squares for obtaining the corrected plateaux and energies. With a view to an automatic operation of radio-measurement chains, the programme also comprises a preliminary section in which the statistical considerations of B. Peirce have been applied in the version better known as Chauvenet's criterion; this has been done with a view to eliminate measurement results which are dubious and even totally wrong. (author) [French] Pour rendre possibles (au moins partiellement) des comparaisons objectives entre paliers de caracteristiques de compteurs a ionisation gazeuse, paliers traces lors de la mesure de chaque etalon radioactif de la production courante du L.M.R., il a ete ecrit un programme (sur machine a calculer electronique) comportant une partie de traitement par les moindres carres en vue de la determination de pentes et d'activites corrigees. En prevision d'une exploitation automatique de cha es de radio-mesure, le programme comporte en outre une partie preliminaire dans laquelle des considerations statistiques dues a B. Peirce ont ete appliquees dans leur version plus connue sous le nom de critere de Chauvenet et ce dans le but d'une elimination des resultats de mesure suspects et meme veritablement aberrants. (auteur)

  13. "SMART": A Compact and Handy FORTRAN Code for the Physics of Stellar Atmospheres

    Science.gov (United States)

    Sapar, A.; Poolamäe, R.

    2003-01-01

    A new computer code SMART (Spectra from Model Atmospheres by Radiative Transfer) for computing the stellar spectra, forming in plane-parallel atmospheres, has been compiled by us and A. Aret. To guarantee wide compatibility of the code with shell environment, we chose FORTRAN-77 as programming language and tried to confine ourselves to common part of its numerous versions both in WINDOWS and LINUX. SMART can be used for studies of several processes in stellar atmospheres. The current version of the programme is undergoing rapid changes due to our goal to elaborate a simple, handy and compact code. Instead of linearisation (being a mathematical method of recurrent approximations) we propose to use the physical evolutionary changes or in other words relaxation of quantum state populations rates from LTE to NLTE has been studied using small number of NLTE states. This computational scheme is essentially simpler and more compact than the linearisation. This relaxation scheme enables using instead of the Λ-iteration procedure a physically changing emissivity (or the source function) which incorporates in itself changing Menzel coefficients for NLTE quantum state populations. However, the light scattering on free electrons is in the terms of Feynman graphs a real second-order quantum process and cannot be reduced to consequent processes of absorption and emission as in the case of radiative transfer in spectral lines. With duly chosen input parameters the code SMART enables computing radiative acceleration to the matter of stellar atmosphere in turbulence clumps. This also enables to connect the model atmosphere in more detail with the problem of the stellar wind triggering. Another problem, which has been incorporated into the computer code SMART, is diffusion of chemical elements and their isotopes in the atmospheres of chemically peculiar (CP) stars due to usual radiative acceleration and the essential additional acceleration generated by the light-induced drift. As

  14. Free-format RPG IV

    CERN Document Server

    Martin, Jim

    2013-01-01

    This how-to guide offers a concise and thorough introduction to the increased productivity, better readability, and easier program maintenance that comes with the free-format style of programming in RPG IV. Although free-format information is available in IBM manuals, it is not separated from everything else, thereby requiring hours of tedious research to track down the information needed. This book provides everything one needs to know to write RPG IV in the free-format style, and author Jim Martin not only teaches rules and syntax but also explains how this new style of coding has the pot

  15. Operations analysis (study 2.1). Program SEPSIM (solar electric propulsion stage simulation). [in FORTRAN: space tug

    Science.gov (United States)

    Lang, T. J.

    1974-01-01

    Program SEPSIM is a FORTRAN program which performs deployment, servicing, and retrieval missions to synchronous equatorial orbit using a space tug with a continuous low thrust upper stage known as a solar electric propulsion stage (SEPS). The SEPS ferries payloads back and forth between an intermediate orbit and synchronous orbit, and performs the necessary servicing maneuvers in synchronous orbit. The tug carries payloads between the orbiter and the intermediate orbit, deploys fully fueled SEPS vehicles, and retrieves exhausted SEPS vehicles when, and if, required. The program is presently contained in subroutine form in the Logistical On-orbit VEhicle Servicing (LOVES) Program, but can also be run independently with the addition of a simple driver program.

  16. Development of three-dimensional neoclassical transport simulation code with high performance Fortran on a vector-parallel computer

    International Nuclear Information System (INIS)

    Satake, Shinsuke; Okamoto, Masao; Nakajima, Noriyoshi; Takamaru, Hisanori

    2005-11-01

    A neoclassical transport simulation code (FORTEC-3D) applicable to three-dimensional configurations has been developed using High Performance Fortran (HPF). Adoption of computing techniques for parallelization and a hybrid simulation model to the δf Monte-Carlo method transport simulation, including non-local transport effects in three-dimensional configurations, makes it possible to simulate the dynamism of global, non-local transport phenomena with a self-consistent radial electric field within a reasonable computation time. In this paper, development of the transport code using HPF is reported. Optimization techniques in order to achieve both high vectorization and parallelization efficiency, adoption of a parallel random number generator, and also benchmark results, are shown. (author)

  17. 11. IV avati Draakoni galeriis...

    Index Scriptorium Estoniae

    2005-01-01

    Tanel Saare (sünd. 1979) näitus "Gott und huhn episode IV: seed shower". Eksponeeritakse väljavõtteid aktsioonidest aastatel 2000-2004 Turus, Nürnbergis, Berliinis, Lohusalus ja Soulis. Osa aktsioone toimus koos rühmitusega Non Grata

  18. Java/JNI/C/Fortran makefile project for a Java plug-in and related Android app in Eclipse ADT bundle : A side-by-side comparison

    NARCIS (Netherlands)

    De Beer, R.; Van Ormondt, D.

    2015-01-01

    We have developed a Java/Fortran based application, called MonteCarlo, that enables the users can carry out Monte Carlo studies in the field of in vivo MRS. The application is supposed to be used as a tool for the jMRUI platform, being the in vivo MRS software system of the TRANSACT European Union

  19. Final Report, Center for Programming Models for Scalable Parallel Computing: Co-Array Fortran, Grant Number DE-FC02-01ER25505

    Energy Technology Data Exchange (ETDEWEB)

    Robert W. Numrich

    2008-04-22

    The major accomplishment of this project is the production of CafLib, an 'object-oriented' parallel numerical library written in Co-Array Fortran. CafLib contains distributed objects such as block vectors and block matrices along with procedures, attached to each object, that perform basic linear algebra operations such as matrix multiplication, matrix transpose and LU decomposition. It also contains constructors and destructors for each object that hide the details of data decomposition from the programmer, and it contains collective operations that allow the programmer to calculate global reductions, such as global sums, global minima and global maxima, as well as vector and matrix norms of several kinds. CafLib is designed to be extensible in such a way that programmers can define distributed grid and field objects, based on vector and matrix objects from the library, for finite difference algorithms to solve partial differential equations. A very important extra benefit that resulted from the project is the inclusion of the co-array programming model in the next Fortran standard called Fortran 2008. It is the first parallel programming model ever included as a standard part of the language. Co-arrays will be a supported feature in all Fortran compilers, and the portability provided by standardization will encourage a large number of programmers to adopt it for new parallel application development. The combination of object-oriented programming in Fortran 2003 with co-arrays in Fortran 2008 provides a very powerful programming model for high-performance scientific computing. Additional benefits from the project, beyond the original goal, include a programto provide access to the co-array model through access to the Cray compiler as a resource for teaching and research. Several academics, for the first time, included the co-array model as a topic in their courses on parallel computing. A separate collaborative project with LANL and PNNL showed how to

  20. A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials; Programme fortran pour la diffusion elastique de deutons avec un modele optique contenant des termes tensoriels

    Energy Technology Data Exchange (ETDEWEB)

    Raynal, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [French] Le modele optique a ete applique avec succes a la diffusion elastique des particules de spin nul et 1/2 et dans une moindre mesure a celle des deutons. Pour les particules de spin 1/2, on utilise habituellement un couplage LS, necessaire pour calculer la polarisation; pour les deutons, ce couplage a deja ete introduit, mais les formes de potentiel possibles sont plus nombreuses (intervention de produits scalaires d'un tenseur d'ordre 2 de spin avec un tenseur du meme ordre d'espace ou d'impulsion) et celles qui peuvent etre eventuellement necessaires ont une importance capitale pour la polarisation tensorielle. Ce probleme revet a Saclay un interet

  1. A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials; Programme fortran pour la diffusion elastique de deutons avec un modele optique contenant des termes tensoriels

    Energy Technology Data Exchange (ETDEWEB)

    Raynal, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [French] Le modele optique a ete applique avec succes a la diffusion elastique des particules de spin nul et 1/2 et dans une moindre mesure a celle des deutons. Pour les particules de spin 1/2, on utilise habituellement un couplage LS, necessaire pour calculer la polarisation; pour les deutons, ce couplage a deja ete introduit, mais les formes de potentiel possibles sont plus nombreuses (intervention de produits scalaires d'un tenseur d'ordre 2 de spin avec un tenseur du meme ordre d'espace ou d'impulsion) et celles qui peuvent etre eventuellement necessaires ont une importance capitale pour la polarisation tensorielle. Ce probleme revet a Saclay un interet particulier depuis la mise

  2. PUFF-IV, Code System to Generate Multigroup Covariance Matrices from ENDF/B-VI Uncertainty Files

    International Nuclear Information System (INIS)

    2007-01-01

    1 - Description of program or function: The PUFF-IV code system processes ENDF/B-VI formatted nuclear cross section covariance data into multigroup covariance matrices. PUFF-IV is the newest release in this series of codes used to process ENDF uncertainty information and to generate the desired multi-group correlation matrix for the evaluation of interest. This version includes corrections and enhancements over previous versions. It is written in Fortran 90 and allows for a more modular design, thus facilitating future upgrades. PUFF-IV enhances support for resonance parameter covariance formats described in the ENDF standard and now handles almost all resonance parameter covariance information in the resolved region, with the exception of the long range covariance sub-subsections. PUFF-IV is normally used in conjunction with an AMPX master library containing group averaged cross section data. Two utility modules are included in this package to facilitate the data interface. The module SMILER allows one to use NJOY generated GENDF files containing group averaged cross section data in conjunction with PUFF-IV. The module COVCOMP allows one to compare two files written in COVERX format. 2 - Methods: Cross section and flux values on a 'super energy grid,' consisting of the union of the required energy group structure and the energy data points in the ENDF/B-V file, are interpolated from the input cross sections and fluxes. Covariance matrices are calculated for this grid and then collapsed to the required group structure. 3 - Restrictions on the complexity of the problem: PUFF-IV cannot process covariance information for energy and angular distributions of secondary particles. PUFF-IV does not process covariance information in Files 34 and 35; nor does it process covariance information in File 40. These new formats will be addressed in a future version of PUFF

  3. Uruguay; 2011 Article IV Consultation

    OpenAIRE

    International Monetary Fund

    2011-01-01

    This 2011 Article IV Consultation highlights that the growth momentum in Uruguay has continued into 2011 but a slowdown is under way, led by weaker exports and slower public investment. Uruguay’s economic and financial vulnerabilities are modest, and the government has reduced debt vulnerabilities significantly and built important financial buffers. Executive Directors have commended authorities’ skillful macroeconomic management that has underpinned Uruguay’s excellent economic performance, ...

  4. Austria; 2013 Article IV Consultation

    OpenAIRE

    International Monetary Fund

    2013-01-01

    This paper presents details of Austria’s 2013 Article IV Consultation. Austria has been growing economically but is facing challenges in the financial sector. Full implementation of medium-term fiscal adjustment plans require specifying several measures and plans that need gradual strengthening to take expected further bank restructuring cost into account. It suggests that strong early bank intervention and resolution tools, a better designed deposit insurance system, and a bank-financed reso...

  5. Thermal-hydraulic Fortran program for steady-state calculations of plate-type fuel research reactors

    Directory of Open Access Journals (Sweden)

    Khedr Ahmed

    2008-01-01

    Full Text Available The safety assessment of research and power reactors is a continuous process covering their lifespan and requiring verified and validated codes. Power reactor codes all over the world are well established and qualified against real measuring data and qualified experimental facilities. These codes are usually sophisticated, require special skills and consume a lot of running time. On the other hand, most research reactor codes still require much more data for validation and qualification. It is, therefore, of benefit to any regulatory body to develop its own codes for the review and assessment of research reactors. The present paper introduces a simple, one-dimensional Fortran program called THDSN for steady-state thermal-hydraulic calculations of plate-type fuel research reactors. Besides calculating the fuel and coolant temperature distributions and pressure gradients in an average and hot channel, the program calculates the safety limits and margins against the critical phenomena encountered in research reactors, such as the onset of nucleate boiling, critical heat flux and flow instability. Well known thermal-hydraulic correlations for calculating the safety parameters and several formulas for the heat transfer coefficient have been used. The THDSN program was verified by comparing its results for 2 and 10 MW benchmark reactors with those published in IAEA publications and a good agreement was found. Also, the results of the program are compared with those published for other programs, such as the PARET and TERMIC.

  6. A Fortran 77 computer code for damped least-squares inversion of Slingram electromagnetic anomalies over thin tabular conductors

    Science.gov (United States)

    Dondurur, Derman; Sarı, Coşkun

    2004-07-01

    A FORTRAN 77 computer code is presented that permits the inversion of Slingram electromagnetic anomalies to an optimal conductor model. Damped least-squares inversion algorithm is used to estimate the anomalous body parameters, e.g. depth, dip and surface projection point of the target. Iteration progress is controlled by maximum relative error value and iteration continued until a tolerance value was satisfied, while the modification of Marquardt's parameter is controlled by sum of the squared errors value. In order to form the Jacobian matrix, the partial derivatives of theoretical anomaly expression with respect to the parameters being optimised are calculated by numerical differentiation by using first-order forward finite differences. A theoretical and two field anomalies are inserted to test the accuracy and applicability of the present inversion program. Inversion of the field data indicated that depth and the surface projection point parameters of the conductor are estimated correctly, however, considerable discrepancies appeared on the estimated dip angles. It is therefore concluded that the most important factor resulting in the misfit between observed and calculated data is due to the fact that the theory used for computing Slingram anomalies is valid for only thin conductors and this assumption might have caused incorrect dip estimates in the case of wide conductors.

  7. Calculation of Absorbed Glandular Dose using a FORTRAN Program Based on Monte Carlo X-ray Spectra in Mammography

    Directory of Open Access Journals (Sweden)

    Ali Asghar Mowlavi

    2011-03-01

    Full Text Available Introduction: Average glandular dose calculation in mammography with Mo-Rh target-filter and dose calculation for different situations is accurate and fast. Material and Methods: In this research, first of all, x-ray spectra of a Mo target bombarded by a 28 keV electron beam with and without a Rh filter were calculated using the MCNP code. Then, we used the Sobol-Wu parameters to write a FORTRAN code to calculate average glandular dose. Results: Average glandular dose variation was calculated against the voltage of the mammographic x-ray tube for d = 5 cm, HVL= 0.35 mm Al, and different value of g. Also, the results related to average glandular absorbed dose variation per unit roentgen radiation against the glandular fraction of breast tissue for kV = 28 and HVL = 0.400 mmAl and different values of d are presented. Finally, average glandular dose against d for g = 60% and three values of kV (23, 27, 35 kV with corresponding HVLs have been calculated. Discussion and Conclusion: The absorbed dose computational program is accurate, complete, fast and user friendly. This program can be used for optimization of exposure dose in mammography. Also, the results of this research are in good agreement with the computational results of others.

  8. Crystalline cerium(IV) phosphates

    International Nuclear Information System (INIS)

    Herman, R.G.; Clearfield, A.

    1976-01-01

    The ion exchange behaviour of seven crystalline cerium(IV) phosphates towards some of the alkali metal cations is described. Only two of the compounds (A and C) possess ion exchange properties in acidic solutions. Four others show some ion exchange characteristics in basic media with some of the alkali cations. Compound G does not behave as an ion exchanger in solutions of pH + , but show very little Na + uptake. Compound E undergoes ion exchange with Na + and Cs + , but not with Li+. Both Li + and Na + are sorbed by compounds A and C. The results are indicative of structures which show steric exclusion phenomena. (author)

  9. PREPARATION OF OXOPORPHINATOMANGANESE (IV) COMPLEX

    Energy Technology Data Exchange (ETDEWEB)

    Willner, I.; Otvos, J.; Calvin, M.

    1980-07-01

    Oxo-manganese-tetraphenylporphyrin (O=Mn{sup IV}-TPP) has been prepared by an oxygen-transfer reaction from iodosylbenzene to MnIITPP and characterized by its i.r. and field desorption mass spectra, which are identical to those of the product obtained by direct oxidation of Mn{sup III}(TPP) in an aqueous medium; it transfers oxygen to triphenylphosphine to produce triphenylphosphine oxide, and it is suggested that similar intermediates are important in oxygen activation by cytochrome P-450 as well as in the photosynthetic evolution of oxygen.

  10. Test Review: Advanced Clinical Solutions for WAIS-IV and WMS-IV

    Science.gov (United States)

    Chu, Yiting; Lai, Mark H. C.; Xu, Yining; Zhou, Yuanyuan

    2012-01-01

    The authors review the "Advanced Clinical Solutions for WAIS-IV and WMS-IV". The "Advanced Clinical Solutions (ACS) for the Wechsler Adult Intelligence Scale-Fourth Edition" (WAIS-IV; Wechsler, 2008) and the "Wechsler Memory Scale-Fourth Edition" (WMS-IV; Wechsler, 2009) was published by Pearson in 2009. It is a…

  11. FPDCYS and FPSPEC: computer programs for calculating fission-product beta and gamma multigroup spectra from ENDF/B-IV data

    International Nuclear Information System (INIS)

    Stamatelatos, M.G.; England, T.R.

    1977-05-01

    FPDCYS and FPSPEC are two FORTRAN computer programs used at the Los Alamos Scientific Laboratory (LASL), in conjunction with the CINDER-10 program, for calculating cumulative fission-product beta and/or gamma multigroup spectra in arbitrary energy structures, and for arbitrary neutron irradiation periods and cooling times. FPDCYS processes ENDF/B-IV fission-product decay energy data to generate multigroup beta and gamma spectra from individual ENDF/B-IV fission-product nuclides. FPSPEC further uses these spectra and the corresponding nuclide activities calculated by the CINDER-10 code to produce cumulative beta and gamma spectra in the same energy grids in which FPDCYS generates individual isotope decay spectra. The code system consisting of CINDER-10, FPDCYS, and FPSPEC has been used for comparisons with experimental spectra and continues to be used at LASL for generating spectra in special user-oriented group structures. 3 figures

  12. Domain-Specific Acceleration and Auto-Parallelization of Legacy Scientific Code in FORTRAN 77 using Source-to-Source Compilation

    OpenAIRE

    Vanderbauwhede, Wim; Davidson, Gavin

    2017-01-01

    Massively parallel accelerators such as GPGPUs, manycores and FPGAs represent a powerful and affordable tool for scientists who look to speed up simulations of complex systems. However, porting code to such devices requires a detailed understanding of heterogeneous programming tools and effective strategies for parallelization. In this paper we present a source to source compilation approach with whole-program analysis to automatically transform single-threaded FORTRAN 77 legacy code into Ope...

  13. Comprehensive Performance Evaluation for Hydrological and Nutrients Simulation Using the Hydrological Simulation Program–Fortran in a Mesoscale Monsoon Watershed, China

    OpenAIRE

    Zhaofu Li; Chuan Luo; Kaixia Jiang; Rongrong Wan; Hengpeng Li

    2017-01-01

    The Hydrological Simulation Program–Fortran (HSPF) is a hydrological and water quality computer model that was developed by the United States Environmental Protection Agency. Comprehensive performance evaluations were carried out for hydrological and nutrient simulation using the HSPF model in the Xitiaoxi watershed in China. Streamflow simulation was calibrated from 1 January 2002 to 31 December 2007 and then validated from 1 January 2008 to 31 December 2010 using daily observed data, and nu...

  14. Aviation Safety Modeling and Simulation (ASMM) Propulsion Fleet Modeling: A Tool for Semi-Automatic Construction of CORBA-based Applications from Legacy Fortran Programs

    Science.gov (United States)

    Sang, Janche

    2003-01-01

    Within NASA's Aviation Safety Program, NASA GRC participates in the Modeling and Simulation Project called ASMM. NASA GRC s focus is to characterize the propulsion systems performance from a fleet management and maintenance perspective by modeling and through simulation predict the characteristics of two classes of commercial engines (CFM56 and GE90). In prior years, the High Performance Computing and Communication (HPCC) program funded, NASA Glenn in developing a large scale, detailed simulations for the analysis and design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). Three major aspects of this modeling included the integration of different engine components, coupling of multiple disciplines, and engine component zooming at appropriate level fidelity, require relatively tight coupling of different analysis codes. Most of these codes in aerodynamics and solid mechanics are written in Fortran. Refitting these legacy Fortran codes with distributed objects can increase these codes reusability. Aviation Safety s modeling and simulation use in characterizing fleet management has similar needs. The modeling and simulation of these propulsion systems use existing Fortran and C codes that are instrumental in determining the performance of the fleet. The research centers on building a CORBA-based development environment for programmers to easily wrap and couple legacy Fortran codes. This environment consists of a C++ wrapper library to hide the details of CORBA and an efficient remote variable scheme to facilitate data exchange between the client and the server model. Additionally, a Web Service model should also be constructed for evaluation of this technology s use over the next two- three years.

  15. Some oxozirconium(IV) compounds

    Energy Technology Data Exchange (ETDEWEB)

    Paul, R C; Gupta, S K; Parmar, S S; Vasisht, S K [Punjab Univ., Chandigarh (India). Dept. of Chemistry

    1976-01-01

    Some new oxozirconium(IV) complexes, ZrO(An)/sub 2/, ZrO(Gly)/sub 2/, ZrO(HSal)/sub 2/, ZrO(HPth)/sub 2/, ZrO(Pic)/sub 2/(HPic)/sub 2/, and ZrO(Quin)/sub 2/(HQuin)/sub 2/ have been isolated from the reactions of ZrO(CH/sub 3/COO)/sub 2/CH/sub 3/COOH with anthranilic acid (HAn), glycine (HGly), salicylic acid (H/sub 2/Sal), phthalic acid (H/sub 2/Pth), picolinic acid (HPic), and 8-quinolinol (HQuin) respectively. Their important infrared bands and wherever possible molar conductance and molecular weight have been reported.

  16. Genetics Home Reference: glycogen storage disease type IV

    Science.gov (United States)

    ... Home Health Conditions Glycogen storage disease type IV Glycogen storage disease type IV Printable PDF Open All ... Javascript to view the expand/collapse boxes. Description Glycogen storage disease type IV (GSD IV) is an ...

  17. A cerium(IV)-carbon multiple bond

    Energy Technology Data Exchange (ETDEWEB)

    Gregson, Matthew; Lu, Erli; McMaster, Jonathan; Lewis, William; Blake, Alexander J.; Liddle, Stephen T. [Nottingham Univ. (United Kingdom). School of Chemistry

    2013-12-02

    Straightforward access to a cerium(IV)-carbene complex was provided by one-electron oxidation of an anionic ''ate'' cerium(III)-carbene precursor, thereby avoiding decomposition reactions that plague oxidations of neutral cerium(III) compounds. The cerium(IV)-carbene complex is the first lanthanide(IV)-element multiple bond and involves a twofold bonding interaction of two electron pairs between cerium and carbon. [German] Auf direktem Wege zu einem Cer(IV)-Carbenkomplex gelangt man durch die Einelektronenoxidation einer anionischen Carben-Cerat(III)-Vorstufe. So werden Zersetzungsprozesse vermieden, die die Oxidation neutraler Cer(III)-Verbindungen erschweren. Der Cer(IV)-Carbenkomplex enthaelt die erste Lanthanoid(IV)-Element-Mehrfachbindung; dabei binden Cer und Kohlenstoff ueber zwei Elektronenpaare.

  18. iväkoti Riemula

    OpenAIRE

    Alanko, Reetta; Ihanamäki, Katja

    2012-01-01

    Opinnäytetyössä kuvataan yleisesti päivähoidon kehitystä Suomessa sekä päivähoitoa yrittäjän näkökulmasta, tuoden esille sen tämän päivän haasteet ja mahdollisuudet. Työssä on pohdittu yhteistyön merkitystä kunnan kanssa ja sitä, miten kunta voi osaltaan joko rajoittaa tai edesauttaa yksityisen päivähoitoyrityksen toimintaa. Opinnäytetyössä kerrotaan teoriassa Päiväkoti Riemula nimisen, erityispäivähoitopalveluita tarjoavan yrityksen perustamiseen liittyvistä suunnitelmista. Suunnitelluss...

  19. Extended analysis of Cu IV

    International Nuclear Information System (INIS)

    Meinders, E.; Uijlings, P.

    1980-01-01

    Wavelength data and classifications of 974 Cu IV lines in the region 750-1275 Angstroem are presented. Most of the lines have been classified as transitions from the previously unknown high even configurations 3d 7 5s and 3d 7 4d to 3d 7 4p. The configuration 3d 7 4d is seriously perturbed by 3d 6 4s 2 . The analysis resulted in the identification of 27 levels of 3d 7 5s and 113 levels of (3d 7 4d + 3d 6 4s 2 ) which are reported. The earlier published levels of 3d 7 4s and 3d 7 4p have to be shifted downward as a consequence of improved wavelength data. Radial paramter values, resulting from least-squares fits, are compared to Hartree-Fock values. The eigenvectors obtained in the parametric fitting are used to calculate transition probabilities in intermediate coupling. The relation between the observed intensities of the transitions 3d 7 4d-3d 7 4p and 3d 7 Ss-3d 7 4p is compared to the relation between theoretical values of the transition integrals obtained from Hartree-Fock calculations. A spectroscopic value for the ionization potentials is calculated from the 3d 7 ns configurations. (orig.)

  20. Studies of binary cerium(IV)-praseodymium(IV) and cerium(IV)-terbium(IV) oxides as pigments for ceramic applications

    International Nuclear Information System (INIS)

    Furtado, L.M.L.

    1991-01-01

    It was investigated a series of pigments of general composition Ce 1-x Pr x O 2 , and Ce x Tb y O 2 , exhibiting radish and brown colors, respectively, and high temperature stability. The pigments were obtained by dissolving appropriate amounts of the pure lanthanide oxides in acids and precipitating the rare earths as mixed oxalates, which were isolated and calcined under air, at 1000 0 C. X-Ray powder diffractograms were consistent with a cubic structure for the pigments. Magnetic susceptibility measurements, using Gouy method, indicated the presence of Pr(IV) ions in the Ce 1-x Pr x O 2 pigments and of Terbium predominantly as Tb(III) ions in the Ce-tb mixed oxides. A new method, based on suspension of solid samples in PVA-STB gels (STB = sodium tetradecaborate), was employed for the measurements of the electronic spectra of the pigments. The thermal behaviour the pigments was investigated by the calcination of the oxalates in the temperature range of 500 to 1200 O C, from 10 to 60 minutes. (author)

  1. Characterizing Flow and Suspended Sediment Trends in the Sacramento River Basin, CA Using Hydrologic Simulation Program - FORTRAN (HSPF)

    Science.gov (United States)

    Stern, M. A.; Flint, L. E.; Flint, A. L.; Wright, S. A.; Minear, J. T.

    2014-12-01

    A watershed model of the Sacramento River Basin, CA was developed to simulate streamflow and suspended sediment transport to the San Francisco Bay Delta (SFBD) for fifty years (1958-2008) using the Hydrological Simulation Program - FORTRAN (HSPF). To compensate for the large model domain and sparse data, rigorous meteorological development and characterization of hydraulic geometry were employed to spatially distribute climate and hydrologic processes in unmeasured locations. Parameterization techniques sought to include known spatial information for tributaries such as soil information and slope, and then parameters were scaled up or down during calibration to retain the spatial characteristics of the land surface in un-gaged areas. Accuracy was assessed by comparing model calibration to measured streamflow. Calibration and validation of the Sacramento River ranged from "good" to "very good" performance based upon a "goodness-of-fit" statistical guideline. Model calibration to measured sediment loads were underestimated on average by 39% for the Sacramento River, and model calibration to suspended sediment concentrations were underestimated on average by 22% for the Sacramento River. Sediment loads showed a slight decreasing trend from 1958-2008 and was significant (p < 0.0025) in the lower 50% of stream flows. Hypothetical climate change scenarios were developed using the Climate Assessment Tool (CAT). Several wet and dry scenarios coupled with temperature increases were imposed on the historical base conditions to evaluate sensitivity of streamflow and sediment on potential changes in climate. Wet scenarios showed an increase of 9.7 - 17.5% in streamflow, a 7.6 - 17.5% increase in runoff, and a 30 - 93% increase in sediment loads. The dry scenarios showed a roughly 5% decrease in flow and runoff, and a 16 - 18% decrease in sediment loads. The base hydrology was most sensitive to a temperature increase of 1.5 degrees Celsius and an increase in storm intensity and

  2. Creating User-Friendly Tools for Data Analysis and Visualization in K-12 Classrooms: A Fortran Dinosaur Meets Generation Y

    Science.gov (United States)

    Chambers, L. H.; Chaudhury, S.; Page, M. T.; Lankey, A. J.; Doughty, J.; Kern, Steven; Rogerson, Tina M.

    2008-01-01

    During the summer of 2007, as part of the second year of a NASA-funded project in partnership with Christopher Newport University called SPHERE (Students as Professionals Helping Educators Research the Earth), a group of undergraduate students spent 8 weeks in a research internship at or near NASA Langley Research Center. Three students from this group formed the Clouds group along with a NASA mentor (Chambers), and the brief addition of a local high school student fulfilling a mentorship requirement. The Clouds group was given the task of exploring and analyzing ground-based cloud observations obtained by K-12 students as part of the Students' Cloud Observations On-Line (S'COOL) Project, and the corresponding satellite data. This project began in 1997. The primary analysis tools developed for it were in FORTRAN, a computer language none of the students were familiar with. While they persevered through computer challenges and picky syntax, it eventually became obvious that this was not the most fruitful approach for a project aimed at motivating K-12 students to do their own data analysis. Thus, about halfway through the summer the group shifted its focus to more modern data analysis and visualization tools, namely spreadsheets and Google(tm) Earth. The result of their efforts, so far, is two different Excel spreadsheets and a Google(tm) Earth file. The spreadsheets are set up to allow participating classrooms to paste in a particular dataset of interest, using the standard S'COOL format, and easily perform a variety of analyses and comparisons of the ground cloud observation reports and their correspondence with the satellite data. This includes summarizing cloud occurrence and cloud cover statistics, and comparing cloud cover measurements from the two points of view. A visual classification tool is also provided to compare the cloud levels reported from the two viewpoints. This provides a statistical counterpart to the existing S'COOL data visualization tool

  3. Zirconium (IV) complexes with some polymethylenediimines | Na ...

    African Journals Online (AJOL)

    The syntheses of zirconium (IV) complexes have been carried out by the reaction of oxozirconium (IV) chloride with the appropriate diimines (Schiff bases). The complexes were isolated as yellow solids which are stable to heat. The complexes were found to be insoluble in most solvents. The infrared spectra, elemental ...

  4. Astragaloside IV liposomes ameliorates adriamycin-induced ...

    African Journals Online (AJOL)

    Methods: The rats were given a single tail intravenous injection of adriamycin (6 mg/kg) within 1 week, and then divided into four groups including normal, model, benazepril and astragaloside IV liposomes group. They were all orally administered dosage of benazepril and astragaloside IV liposomes once daily for 8 weeks.

  5. Generation IV reactors: international projects

    International Nuclear Information System (INIS)

    Carre, F.; Fiorini, G.L.; Kupitz, J.; Depisch, F.; Hittner, D.

    2003-01-01

    Generation IV international forum (GIF) was initiated in 2000 by DOE (American department of energy) in order to promote nuclear energy in a long term view (2030). GIF has selected 6 concepts of reactors: 1) VHTR (very high temperature reactor system, 2) GHR (gas-cooled fast reactor system), 3) SFR (sodium-cooled fast reactor system, 4) SCWR (super-critical water-cooled reactor system), 5) LFR (lead-cooled fast reactor system), and 6) MFR (molten-salt reactor system). All these 6 reactor systems have been selected on criteria based on: - a better contribution to sustainable development (through their aptitude to produce hydrogen or other clean fuels, or to have a high energy conversion ratio...) - economic profitability, - safety and reliability, and - proliferation resistance. The 6 concepts of reactors are examined in the first article, the second article presents an overview of the results of the international project on innovative nuclear reactors and fuel cycles (INPRO) within IAEA. The project finished its first phase, called phase-IA. It has produced an outlook into the future role of nuclear energy and defined the need for innovation. The third article is dedicated to 2 international cooperations: MICANET and HTR-TN. The purpose of MICANET is to propose to the European Commission a research and development strategy in order to develop the assets of nuclear energy for the future. Future reactors are expected to be more multiple-purposes, more adaptable, safer than today, all these developments require funded and coordinated research programs. The aim of HTR-TN cooperation is to promote high temperature reactor systems, to develop them in a long term perspective and to define their limits in terms of burn-up and operating temperature. (A.C.)

  6. Thermodynamic data for predicting concentrations of Th(IV), U(IV), Np(IV), and Pu(IV) in geologic environments

    Energy Technology Data Exchange (ETDEWEB)

    Rai, Dhanpat; Roa, Linfeng; Weger, H.T.; Felmy, A.R. [Battelle, Pacific Northwest National Laboratory (PNNL) (United States); Choppin, G.R. [Florida State University (United States); Yui, Mikazu [Waste Isolation Research Division, Tokai Works, Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan)

    1999-01-01

    This report provides thermodynamic data for predicting concentrations of Th(IV), U(IV), Np(IV), and Pu(IV) in geologic environments, and contributes to an integration of the JNC chemical thermodynamic database, JNC-TDB (previously PNC-TDB), for the performance analysis of geological isolation system for high-level radioactive wastes. Thermodynamic data for the formation of complexes or compounds with hydroxide, chloride, fluoride, carbonate, nitrate, sulfate and phosphate are discussed in this report. Where data for specific actinide(IV) species was lacking, the data were selected based on chemical analogy to other tetravalent actinides. In this study, the Pitzer ion-interaction model is used to extrapolate thermodynamic constants to zero ionic strength at 25degC. (author)

  7. Materials for generation-IV nuclear reactors

    International Nuclear Information System (INIS)

    Alvarez, M. G.

    2009-01-01

    Materials science and materials development are key issues for the implementation of innovative reactor systems such as those defined in the framework of the Generation IV. Six systems have been selected for Generation IV consideration: gas-cooled fast reactor, lead-cooled fast reactor, molten salt-cooled reactor, sodium-cooled fast reactor, supercritical water-cooled reactor, and very high temperature reactor. The structural materials need to resist much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. For this reason, the first consideration in the development of Generation-IV concepts is selection and deployment of materials that operate successfully in the aggressive operating environments expected in the Gen-IV concepts. This paper summarizes the Gen-IV operating environments and describes the various candidate materials under consideration for use in different structural applications. (author)

  8. On the tradeoffs of programming language choice for numerical modelling in geoscience. A case study comparing modern Fortran, C++/Blitz++ and Python/NumPy.

    Science.gov (United States)

    Jarecka, D.; Arabas, S.; Fijalkowski, M.; Gaynor, A.

    2012-04-01

    The language of choice for numerical modelling in geoscience has long been Fortran. A choice of a particular language and coding paradigm comes with different set of tradeoffs such as that between performance, ease of use (and ease of abuse), code clarity, maintainability and reusability, availability of open source compilers, debugging tools, adequate external libraries and parallelisation mechanisms. The availability of trained personnel and the scale and activeness of the developer community is of importance as well. We present a short comparison study aimed at identification and quantification of these tradeoffs for a particular example of an object oriented implementation of a parallel 2D-advection-equation solver in Python/NumPy, C++/Blitz++ and modern Fortran. The main angles of comparison will be complexity of implementation, performance of various compilers or interpreters and characterisation of the "added value" gained by a particular choice of the language. The choice of the numerical problem is dictated by the aim to make the comparison useful and meaningful to geoscientists. Python is chosen as a language that traditionally is associated with ease of use, elegant syntax but limited performance. C++ is chosen for its traditional association with high performance but even higher complexity and syntax obscurity. Fortran is included in the comparison for its widespread use in geoscience often attributed to its performance. We confront the validity of these traditional views. We point out how the usability of a particular language in geoscience depends on the characteristics of the language itself and the availability of pre-existing software libraries (e.g. NumPy, SciPy, PyNGL, PyNIO, MPI4Py for Python and Blitz++, Boost.Units, Boost.MPI for C++). Having in mind the limited complexity of the considered numerical problem, we present a tentative comparison of performance of the three implementations with different open source compilers including CPython and

  9. A FORTRAN-compatible program package for the control of CAMAC-systems by a PDP-11 (CA11-A/DEC, Type 1533A/BORER)

    International Nuclear Information System (INIS)

    Lengauer, C.

    1975-01-01

    The described software serves for the control of CAMAC-systems by a PDP-11 Computer with one DEC CA11-A Branch-Driver, respectively up to ten BORER Type 1533A Single-Crate-Controllers under the Operating System DOS V08. The software consists of three parts: 1) a subroutine library for programming in FORTRAN, 2) a macro library for programming in Assembler (for time-critical problems), 3) a loadable CAMAC-Driver for controlling the system by input of single CAMAC-commands at the terminal. Programs which apply the first two parts can be written independently of the CAMAC-Controller used at runtime. (orig.) [de

  10. Adduct formation in Ce(IV) thenolytrifluoroacetonate

    International Nuclear Information System (INIS)

    Anufrieva, S.I.; Polyakova, G.V.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.I.; Spitsyn, V.I.

    1982-01-01

    The literature contains no information on adduct formation in Ce(IV) β-diketonates with additional ligands. Since tetrakis-β-diketonates of Ce(IV) have four six-membered chelate rings, we can suppose that the introduction of an additional monodentate or bidentate ligand into the coordination sphere of Ce(IV) β-diketonates would lead to an increase in the coordination number (CN) of the Ce(IV) to nine or ten. The possibility of realization of such a high CN for Ce(IV) has not been proved; a study of adduct formation by Ce(IV) tetrakis-β-diketonates is thus of theoretical interest. Such an investigation might also be of practical interest, because the introduction of an additional ligand into the coordination sphere of a rare-earth β-diketonate usually increases the solubility of the β-diketonate in nonpolar solvents and increases the volatility of the compound; such a modification of the properties is important for various practical purposes. The aim of our work was to study the possibility of separating solid adducts of Ce(IV) tetrakis-thenoyltrifluoroacetonate with certain oxygen-containing and nitrogen-containing donor monodentate and bidentate ligands, and also to investigate their properties. As the β-diketone we used thenoyltrifluoroacetone (HTTFA), since in a parallel investigation it was found that Ce(TTFA) 4 has a high oxidation-reduction stability

  11. Market opportunities: U.S. - PADD IV

    International Nuclear Information System (INIS)

    Garner, R.P.

    1997-01-01

    The current supply and demand balance, the short and long term expectations and marketing opportunities for Canadian crude oil in PADD IV, the Rocky Mountain region in the US, were reviewed. It was suggested that market opportunities in PADD IV are derived from the following four factors: (1) crude oil declines within that area, (2) federal regulations, (3) competitive presence with markets, and (4) population growth. The overall conclusion was that Canadian producers and PADD IV refiners will be looking at an ever-growing relationship based on freight equalized world crude prices. 8 tabs., 5 figs

  12. Diorganotin(IV) Complexes with Methionine Methyl Ester. Equilibria ...

    African Journals Online (AJOL)

    IV) (DBT) and diphenyltin(IV) (DPT) was investigated at 25 °C and 0.1 mol dm–3 ionic strength in water for dimethyltin(IV) and in 50 % dioxane–water mixture for dibutyltin(IV) and diphenyltin(IV). Methionine methyl ester forms1:1 and 1:2 ...

  13. Periodontal Disease Part IV: Periodontal Infections

    OpenAIRE

    Turnbull, Robert S.

    1988-01-01

    In Part IV of this article, the author describes two periodontal infections, acute necrotizing ulcerative gingivitis (trench mouth) and periodontal abscess, both acute painful conditions for which patients may seek advice from their family physician rather than their dentist.

  14. Safety assessment for Generation IV nuclear systems

    International Nuclear Information System (INIS)

    Leahy, T.J.

    2012-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Recent RSWG work has focused on the definition of an integrated safety assessment methodology (ISAM) for evaluating the safety of Generation IV systems. ISAM is an integrated 'tool-kit' consisting of 5 analytical techniques that are available and matched to appropriate stages of Generation IV system concept development: 1) qualitative safety features review - QSR, 2) phenomena identification and ranking table - PIRT, 3) objective provision tree - OPT, 4) deterministic and phenomenological analyses - DPA, and 5) probabilistic safety analysis - PSA. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time

  15. Determination of uranium (IV) by flow voltammetry

    International Nuclear Information System (INIS)

    Ding Anqing

    1987-01-01

    According to the quantitative reaction of U(IV) and Fe(III) in H 2 SO 4 as well as the relation between current and concentration of substance detected, U(IV) has been determined indirectly by measurement of the electrolysis current of residual Fe(III). The columniform electrode used is made of glass carbon particles. At the range of U(IV) from a few micrograms to 40 μg, the linear relation is excellent. The relative standard deviation is within ±4%. The interference of Fe(II), Ti(IV) and U(VI) is negligible but of Ti(III) is serious. This method has been successfully applied in the determination of actual samples (both out line and on line). Main advantages of this procedure are rapid, simple, small amount of sample (only at microgram level) and easy to realize automation, able to use for on line or process analysis

  16. IV&V Project Assessment Process Validation

    Science.gov (United States)

    Driskell, Stephen

    2012-01-01

    The Space Launch System (SLS) will launch NASA's Multi-Purpose Crew Vehicle (MPCV). This launch vehicle will provide American launch capability for human exploration and travelling beyond Earth orbit. SLS is designed to be flexible for crew or cargo missions. The first test flight is scheduled for December 2017. The SLS SRR/SDR provided insight into the project development life cycle. NASA IV&V ran the standard Risk Based Assessment and Portfolio Based Risk Assessment to identify analysis tasking for the SLS program. This presentation examines the SLS System Requirements Review/System Definition Review (SRR/SDR), IV&V findings for IV&V process validation correlation to/from the selected IV&V tasking and capabilities. It also provides a reusable IEEE 1012 scorecard for programmatic completeness across the software development life cycle.

  17. Genetics Home Reference: mucopolysaccharidosis type IV

    Science.gov (United States)

    ... enzymes, GAGs accumulate within cells, specifically inside the lysosomes . Lysosomes are compartments in the cell that break down ... that cause molecules to build up inside the lysosomes are called lysosomal storage disorders. In MPS IV, ...

  18. Current status of NPP generation IV

    International Nuclear Information System (INIS)

    Yohanes Dwi Anggoro; Dharu Dewi; Nurlaila; Arief Tris Yuliyanto

    2013-01-01

    Today development of nuclear technology has reached the stage of research and development of Generation IV nuclear power plants (advanced reactor systems) which is an innovative development from the previous generation of nuclear power plants. There are six types of power generation IV reactors, namely: Very High Temperature Reactor (VHTR), Sodium-cooled Fast Reactor (SFR), Gas-cooled Fast Reactor (GFR), Lead-cooled Fast Reactor (LFR), Molten Salt Reactor (MSR), and Super Critical Water-cooled Reactor (SCWR). The purpose of this study is to know the development of Generation IV nuclear power plants that have been done by the thirteen countries that are members of the Gen IV International Forum (GIF). The method used is review study and refers to various studies related to the current status of research and development of generation IV nuclear power. The result of this study showed that the systems and technology on Generation IV nuclear power plants offer significant advances in sustainability, safety and reliability, economics, and proliferation resistance and physical protection. In addition, based on the research and development experience is estimated that: SFR can be used optimally in 2015, VHTR in 2020, while NPP types GFR, LFR, MSR, and SCWR in 2025. Utilization of NPP generation IV said to be optimal if fulfill the goal of NPP generation IV, such as: capable to generate energy sustainability and promote long-term availability of nuclear fuel, minimize nuclear waste and reduce the long term stewardship burden, has an advantage in the field of safety and reliability compared to the previous generation of NPP and VHTR technology have a good prospects in Indonesia. (author)

  19. Dsm-iv hypochondriasis in primary care

    OpenAIRE

    Escobar, JI; Gara, M; Waitzkin, H; Silver, RC; Holman, A; Compton, W

    1998-01-01

    The object of this study was to assess the prevalence and correlates of the DSM-IV diagnosis of hypochondriasis in a primary care setting. A large sample (N = 1456) of primary care users was given a structured interview to make diagnoses of mood, anxiety, and somatoform disorders and estimate levels of disability. The prevalence of hypochondriasis (DSM-IV) was about 3%. Patients with this disorder had higher levels of medically unexplained symptoms (abridged somatization) and were more impair...

  20. COBRA-IV wire wrap data comparisons

    International Nuclear Information System (INIS)

    Donovan, T.E.; George, T.L.; Wheeler, C.L.

    1979-02-01

    Thermal hydraulic analyses of hexagonally packed wire-wrapped fuel assemblies are complicated by the induced crossflow between adjacent subchannels. The COBRA-IV computer code simultaneously solves the hydrodynamics and thermodynamics of fuel assemblies. The modifications and the results are presented which are predicted by the COBRA-IV calculation. Comparisons are made with data measured in five experimental models of a wire-wrapped fuel assembly

  1. Interim report on the development and application of environmental mapped data digitization, encoding, analysis, and display software for the ALICE system. Volume II. [MAP, CHAIN, FIX, and DOUT, in FORTRAN IV for PDP-10

    Energy Technology Data Exchange (ETDEWEB)

    Amiot, L.W.; Lima, R.J.; Scholbrock, S.D.; Shelman, C.B.; Wehman, R.H.

    1979-06-01

    Volume I of An Interim Report on the Development and Application of Environmental Mapped Data Digitization, Encoding, Analysis, and Display Software for the ALICE System provided an overall description of the software developed for the ALICE System and presented an example of its application. The scope of the information presented in Volume I was directed both to the users and developers of digitization, encoding, analysis, and display software. Volume II presents information which is directly related to the actual computer code and operational characteristics (keys and subroutines) of the software. Volume II will be of more interest to developers of software than to users of the software. However, developers of software should be aware that the code developed for the ALICE System operates in an environment where much of the peripheral hardware to the PDP-10 is ANL/AMD built. For this reason, portions of the code may have to be modified for implementation on other computer system configurations. 11 tables.

  2. Synthesis and characterization of chiral thorium(IV) and uranium(IV) benzamidinate complexes

    Energy Technology Data Exchange (ETDEWEB)

    Schoene, Sebastian; Maerz, Juliane; Kaden, Peter; Patzschke, Michael; Ikeda-Ohno, Atsushi [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Chemistry of the F-Elements

    2017-06-01

    Two chiral benzamidinate complexes of tetravalent actinides (Th(IV) and U(IV)) were synthesized using a salt metathesis reaction of the corresponding actinide(IV) tetrachlorides and the potassium salt of the chiral benzamidine (S,S)-N,N-Bis-(1-phenylethyl)-benzamidine ((S)-HPEBA). The structure of the complexes was determined with single crystal X-ray diffraction. These are the first examples of chiral amidinate complexes of actinides.

  3. Solubility study of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 ·nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 ·nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 ·nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2 + . The solubility of Tc(IV) oxide has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49-1.86) x 10 -9 mol/(L·d) under aerobic conditions, but Tc(IV) in simulated groundwater and redistilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  4. Solubility of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    Full text of publication follows: The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. The solubility of Tc(IV) is used as a source term in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) oxide has been determined in simulated groundwater and re-distilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and re-distilled water is about (1.49∼1.86) x 10 -9 mol/(L.d) under aerobic conditions, but Tc(IV) in simulated groundwater and re-distilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and re-distilled water is equal on the whole after centrifugation or ultrafiltration. The solubility of Tc(IV) oxide decreases with the increase of pH at pH 10 and is pH independent in the range 2 -8 to 10 -9 mol/L at 2 3 2- concentration. These data could be used to estimate the Tc(IV) solubility for cases where solubility limits transport of technetium in reducing environments of high-level waste repositories. (authors)

  5. High cost of stage IV pressure ulcers.

    Science.gov (United States)

    Brem, Harold; Maggi, Jason; Nierman, David; Rolnitzky, Linda; Bell, David; Rennert, Robert; Golinko, Michael; Yan, Alan; Lyder, Courtney; Vladeck, Bruce

    2010-10-01

    The aim of this study was to calculate and analyze the cost of treatment for stage IV pressure ulcers. A retrospective chart analysis of patients with stage IV pressure ulcers was conducted. Hospital records and treatment outcomes of these patients were followed up for a maximum of 29 months and analyzed. Costs directly related to the treatment of pressure ulcers and their associated complications were calculated. Nineteen patients with stage IV pressure ulcers (11 hospital-acquired and 8 community-acquired) were identified and their charts were reviewed. The average hospital treatment cost associated with stage IV pressure ulcers and related complications was $129,248 for hospital-acquired ulcers during 1 admission, and $124,327 for community-acquired ulcers over an average of 4 admissions. The costs incurred from stage IV pressure ulcers are much greater than previously estimated. Halting the progression of early stage pressure ulcers has the potential to eradicate enormous pain and suffering, save thousands of lives, and reduce health care expenditures by millions of dollars. Copyright © 2010 Elsevier Inc. All rights reserved.

  6. Direct complexonometric determination of thorium (IV), uranium (IV), neptunium (IV), plutonium (IV) by titration of diethylenetriaminepentaacetic acid with xylenol orange as indicator

    International Nuclear Information System (INIS)

    Rykov, A.G.; Piskunov, E.M.; Timofeev, G.A.

    1975-01-01

    The purpose of the present work was to develop a method of determining Th(IV), U(IV), Np(N) and Pu(IV) in acid solutions by titration with diethylenetriamine pentacetic acid, the indicator being xylenol orange. It has been established that Th, U, Np and Pu can be determined to within 0.5-1.5%. Th and U in quantities of tens of milligrams can be determined with greater accuracy, attaining hundredths of one per cent. During titration the determination is not hindered by singly- and doubly-charged metal ions, trivalent lanthanides and actinides, except plutonium. The proposed method can be used to determine U(IV) in the presence of considerable quantities of U(VI) and Np(IV) in the presence of Np(V). Total concentrations of uranium or neptunium are determined by reducing uranium (VI) or neptunium (V) by a standard method (for example, using metallic lead, cadmium or zinc amalgam) to the tetravalent state and applying the method described in the paper. (E.P.)

  7. The Contribution of IVS to IGGOS

    Science.gov (United States)

    Nothnagel, A.

    2002-05-01

    Since its inauguration in 1999, the International VLBI Service for Geodesy and Astrometry has made significant progress in the coordination and utilisation of worldwide VLBI resources. Improving the visibility of the IVS components to a wider public in turn led to a higher motivation of the individuals to contribute to the global effort. Not only the number of IVS components but also their investments in terms of funds and manpower demonstrate the increased awareness of the importance of this joint international endeavour. The different demands of the users but also of the contributors often require the definition of priorities which are only being acceptable due to the existence of a strong umbrella organisation like the IVS. Significant progress has also been made in the area of routine data analysis and combination of results. By now, six IVS Analysis Centers provide the redundancy necessary for a robust combination of the results. The use of ITRF2000 station coordinates as the basis for the IVS combined EOP series is the most recent step towards the generation of a consistent chain from the quasi-inertial frame of radio sources to system Earth.

  8. Solubility studies of Np(IV)

    International Nuclear Information System (INIS)

    Zhang Yingjie; Yao Jun; Jiao Haiyang; Ren Lihong; Zhou Duo; Fan Xianhua

    2001-01-01

    The solubility of Np(IV) in simulated underground water and redistilled water has been measured with the variations of pH(6-12) and storage time (0-100 d) in the presence of reductant (Na 2 S 2 O 4 , metallic Fe). All experiments are performed in a low oxygen concentration glove box containing high purity Ar(99.99%), with an oxygen content of less than 5 x 10 -6 mol/mol. Experimental results show that the variation of pH in solution has little effect on the solubility of Np(IV) in the two kinds of water; the measured solubility of Np(IV) is affected by the composition of solution; with Na 2 S 2 O 4 as a reductant, the solubility of Np(IV) in simulated underground water is (9.23 +- 0.48) x 10 -10 mol/L, and that in redistilled water is (8.31 +- 0.35) x 10 -10 mol/L; with metallic Fe as a reductant, the solubility of Np(IV) in simulated underground water is (1.85 +- 0.56) x 10 -9 mol/L, and that in redistilled water is (1.48 +- 0.66) x 10 -9 mol/L

  9. Parallel Fortran-MPI software for numerical inversion of the Laplace transform and its application to oscillatory water levels in groundwater environments

    Science.gov (United States)

    Zhan, X.

    2005-01-01

    A parallel Fortran-MPI (Message Passing Interface) software for numerical inversion of the Laplace transform based on a Fourier series method is developed to meet the need of solving intensive computational problems involving oscillatory water level's response to hydraulic tests in a groundwater environment. The software is a parallel version of ACM (The Association for Computing Machinery) Transactions on Mathematical Software (TOMS) Algorithm 796. Running 38 test examples indicated that implementation of MPI techniques with distributed memory architecture speedups the processing and improves the efficiency. Applications to oscillatory water levels in a well during aquifer tests are presented to illustrate how this package can be applied to solve complicated environmental problems involved in differential and integral equations. The package is free and is easy to use for people with little or no previous experience in using MPI but who wish to get off to a quick start in parallel computing. ?? 2004 Elsevier Ltd. All rights reserved.

  10. Exshall: A Turkel-Zwas explicit large time-step FORTRAN program for solving the shallow-water equations in spherical coordinates

    Science.gov (United States)

    Navon, I. M.; Yu, Jian

    A FORTRAN computer program is presented and documented applying the Turkel-Zwas explicit large time-step scheme to a hemispheric barotropic model with constraint restoration of integral invariants of the shallow-water equations. We then proceed to detail the algorithms embodied in the code EXSHALL in this paper, particularly algorithms related to the efficiency and stability of T-Z scheme and the quadratic constraint restoration method which is based on a variational approach. In particular we provide details about the high-latitude filtering, Shapiro filtering, and Robert filtering algorithms used in the code. We explain in detail the various subroutines in the EXSHALL code with emphasis on algorithms implemented in the code and present the flowcharts of some major subroutines. Finally, we provide a visual example illustrating a 4-day run using real initial data, along with a sample printout and graphic isoline contours of the height field and velocity fields.

  11. On the stabilization of niobium(V) solutions by zirconium(IV) and hafnium(IV)

    DEFF Research Database (Denmark)

    Sørensen, E.; Bjerre, A.B.

    1992-01-01

    Niobium cannot be separated from zirconium or hafnium when these elements occur together in solution with common anions such as chloride and sulphate. This is ascribed to the co-polymerization of niobium(V) and the hydrolysed ionic species of zirconium(IV) and hafnium(IV) to form colloidal...

  12. Complexation of the An(IV) by NTA; Complexation des An(IV) par le NTA

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, L. [Paris-11 Univ., 91 - Orsay (France)]|[CEA Valrho, Lab. de Chimie des Actinides (LCA), 30 - Marcoule (France)

    2006-07-01

    In the framework of the Nuclear and Environmental Toxicology program, developed in France, it has been decided to take again the studies concerning the actinides decorporation. A similar study of the neptunium complexation by the citrate ions has been carried out on the complexation of Np(IV) with the nitrilotriacetic acid (NTA). The NTA can be considered as a model molecule of the de-corporating molecules (amino-carboxy- ligand). The results of the spectrophotometric measurements being encouraging, the behaviour of several actinides at the same oxidation state (+IV) (Th(IV), U(IV), Np(IV), and Pu(IV)) has been determined. The experimental results are presented. In order to determine the structure of the complexes of stoichiometry 1:2 An(IV)-(NTA){sub 2} in solution, quantic chemistry calculations and EXAFS measurements have been carried out in parallel. These studies confirm the presence of An(IV)-nitrogen bonds whose length decreases from thorium to plutonium and indicate the presence of a water molecule bound to the thorium and the uranium (coordination number 8 for Np/Pu, 9 for Th/U). The evolution of the complexation constants determined in this study in terms of 1/r (r ionic radius of the cation taking into account its coordination number 8 or 9) confirms the change of the coordination number between Th/U and Np/Pu. (O.M.)

  13. Transuranium perrhenates: Np(IV), Pu(IV) and (III), Am (III)

    International Nuclear Information System (INIS)

    Silvestre, Jean-Paul; Freundlich, William; Pages, Monique

    1977-01-01

    Synthesis in aqueous solution and by solid state reactions, crystallographical characterization and study of the stability of some transuranium perrhenates: Asup(n+)(ReO 4 - )sub(n) (A=Np(IV), Pu(IV), Pu(III), Am(III) [fr

  14. Oxochloroalkoxide of the Cerium (IV and Titanium (IV as oxides precursor

    Directory of Open Access Journals (Sweden)

    Machado Luiz Carlos

    2002-01-01

    Full Text Available The Cerium (IV and Titanium (IV oxides mixture (CeO2-3TiO2 was prepared by thermal treatment of the oxochloroisopropoxide of Cerium (IV and Titanium (IV. The chemical route utilizing the Cerium (III chloride alcoholic complex and Titanium (IV isopropoxide is presented. The compound Ce5Ti15Cl16O30 (iOPr4(OH-Et15 was characterized by elemental analysis, FTIR and TG/DTG. The X-ray diffraction patterns of the oxides resulting from the thermal decomposition of the precursor at 1000 degreesC for 36 h indicated the formation of cubic cerianite (a = 5.417Å and tetragonal rutile (a = 4.592Å and (c = 2.962 Å, with apparent crystallite sizes around 38 and 55nm, respectively.

  15. Spectroscopy and chemistry of uranium IV

    International Nuclear Information System (INIS)

    Folcher, G.; Rigny, P.

    1980-06-01

    Different fundamental research papers on uranium IV are presented, some were never edited. Molecular spectroscopy was used for identification and structural study of uranium IV in aqueous or organic solutions. The fields studied are: coordination, stereochemistry, electronic structure and chemical properties. For interpretation of results some studies were made with solid compounds or with thorium compounds or thorium complexes. Knowledge of actinides chemistry is improved, uranium and thorium being models for 5 f ions, extractive chemistry is better understood and new applications are possible [fr

  16. Vectorization at the KENO-IV code

    International Nuclear Information System (INIS)

    Asai, K.; Higuchi, K.; Katakura, J.

    1986-01-01

    The multigroup criticality safety code KENO-IV has been vectorized and tested on the FACOM VP-100 vector processor. At first, the vectorized KENO-IV on a scalar processor was slower than the original one by a factor of 1.4 because of the overhead introduced by vectorization. Making modifications of algorithms and techniques for vectorization, the vectorized version has become faster than the original one by a factor of 1.4 on the vector processor. For further speedup of the code, some improvements on compiler and hardware, especially on addition of Monte Carlo pipelines to the vector processor, are discussed

  17. Functions in Free-Format RPG IV

    CERN Document Server

    Martin, Jim

    2009-01-01

    Written especially for programmers adopting a free-format style, this manual explores the role of functions in writing RPG IV programs. Demonstrating the potential of functions, many topics are explored such as details about existing RPG IV built-in functions, writing new functions, using ILE concepts to use C functions, and utilizing IBM API's functions. Explaining how to write small programs, either as sub-procedures or modules, and how to gather those parts together to make programs that are easy to write and maintain, this is a natural next step for programmers familiar with a free-format

  18. Gen IV. Technical and economical aspects

    International Nuclear Information System (INIS)

    Kaluzny, Y.; Legee, F.

    2010-01-01

    In this presentation author deals with development of nuclear reactor type of Generation IV. He concluded that: - Nuclear energy is competitive with regards to the other generation sources; Its competitiveness also increases with CO 2 cost. Considering the nuclear cost breakdown of LWR reactors, it turns out that the uranium is currently not in the range of a threshold for FBR deployment; - The global balance of uranium supply and demand and also innovation required to fulfil GEN IV objectives would probably imply the emergence of fast reactor competitiveness after the turn of the mid-century; - We shall need fast reactors in the coming decade.

  19. Electron - A fortran programme for the coupled channel calculation of nuclear electromagnetic (e,e') form factors and cross sections in the self-consistent random-phase approximation

    International Nuclear Information System (INIS)

    Cavinato, M.; Marangoni, M.; Saruis, A.M.

    1984-01-01

    Description is given of the Electron programme for IBM 370/168 computer, written in Fortran 4. language. The programme calculates (e,e') cross-sections and longitudinal/transverse form factors for closed shell nuclei in the framework of a self-consistent RPA theory

  20. Bis(4-methylpiperidinium hexachloridostannate(IV

    Directory of Open Access Journals (Sweden)

    Madeleine Helliwell

    2008-04-01

    Full Text Available The crystal structure of the title compound, (C6H14N2[SnCl6], is built of 4-methylpiperidinium cations, occupying special positions on the mirror plane, and hexachloridostannate(IV anions on a special position of 2/m symmetry. The ions are linked via N—H...Cl hydrogen bonds into chains running along the b axis.

  1. The carbonate complexation of plutonium(IV)

    International Nuclear Information System (INIS)

    Hobart, D.E.; Palmer, P.D.; Newton, T.W.

    1985-01-01

    Plutonium(IV) carbonate complexes are expected to be of particular importance in typical groundwaters at the Yucca Mountain site of the candidate nuclear waste repository being studied by the Nevada Nuclear Waste Storage Investigations Project. The chemistry of these complexes is also important in the areas of nuclear fuel reprocessing and purification, actinide separations, and environmental studies. This report describes initial experiments performed to determine the identity and equilibrium quotients of plutonium(IV) carbonate complexes. These experiments were performed at pH values between 7.2 and 9.6 using a spectrophotometric method. In addition, a brief review of the published literature on Pu(IV) carbonate complexes is presented. Since Pu(IV) exhibits low solubility in the near-neutral pH range, a complex-competition reaction where citrate ligands compete with carbonate ions for the plutonium will be employed. This will permit us to study the pure carbonate system; study the mixed carbonate/citrate system, and confirm and extend the literature work on the pure citrate system. The current experiments have demonstrated the existence of at least three distinct species in the pH region studied. This work will continue in the extended study of the pure citrate system, followed by the investigation of the citrate/carbonate complex/competition reaction. 9 refs., 4 figs., 2 tabs

  2. Painlevé IV coherent states

    International Nuclear Information System (INIS)

    Bermudez, David; Contreras-Astorga, Alonso; Fernández C, David J.

    2014-01-01

    A simple way to find solutions of the Painlevé IV equation is by identifying Hamiltonian systems with third-order differential ladder operators. Some of these systems can be obtained by applying supersymmetric quantum mechanics (SUSY QM) to the harmonic oscillator. In this work, we will construct families of coherent states for such subset of SUSY partner Hamiltonians which are connected with the Painlevé IV equation. First, these coherent states are built up as eigenstates of the annihilation operator, then as displaced versions of the extremal states, both involving the related third-order ladder operators, and finally as extremal states which are also displaced but now using the so called linearized ladder operators. To each SUSY partner Hamiltonian corresponds two families of coherent states: one inside the infinite subspace associated with the isospectral part of the spectrum and another one in the finite subspace generated by the states created through the SUSY technique. - Highlights: • We use SUSY QM to obtain Hamiltonians with third-order differential ladder operators. • We show that these systems are related with the Painlevé IV equation. • We apply different definitions of coherent states to these Hamiltonians using the third-order ladder operators and some linearized ones. • We construct families of coherent states for such systems, which we called Painlevé IV coherent states

  3. Resonance transition array of Yb IV

    International Nuclear Information System (INIS)

    Kaufman, V.; Sugar, J.

    1976-01-01

    Nineteen pairs of lines in the wavelength range of 800--1300 A were identified as transitions to the two levels of the ground term of Yb IV, 4f 13 2 F. The 2 F 5 / 2 -- 2 F 7 / 2 interval is 10 214.0 cm -1 with an rms deviation of 0.4 cm -1

  4. Industrial Waste Landfill IV upgrade package

    International Nuclear Information System (INIS)

    1994-01-01

    The Y-12 Plant, K-25 Site, and ORNL are managed by DOE's Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit

  5. IV-DSA of vertigo patients

    International Nuclear Information System (INIS)

    Watanabe, Hiromi; Ito, Masatoshi; Takita, Kimio; Matsuzawa, Taiju.

    1988-01-01

    With IV-DSA(Intra-Venous Digital Subtraction Angiography), we examined the relations between vertigo or dizziness and asymmetries of cervical vertebral arteries. In this time, as the asymmetries we chose next three; hemi-stenosis, hemi-occulusion and hemi-strong tortuosity. In the appearance of the asymmetries, there was no differance between those who complain vertigo or dizziness and others. (author)

  6. 21 CFR 1308.14 - Schedule IV.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Schedule IV. 1308.14 Section 1308.14 Food and... isomers is possible: (1) Fenfluramine 1670 (e) Stimulants. Unless specifically excepted or unless listed... the following substances having a stimulant effect on the central nervous system, including its salts...

  7. Painlevé IV coherent states

    Energy Technology Data Exchange (ETDEWEB)

    Bermudez, David, E-mail: david.bermudez@weizmann.ac.il [Department of Physics of Complex Systems, Weizmann Institute of Science, Rehovot 76100 (Israel); Departamento de Física, Cinvestav, A.P. 14-740, 07000 México D.F. (Mexico); Contreras-Astorga, Alonso, E-mail: aloncont@iun.edu [Department of Mathematics and Actuarial Science, Indiana University Northwest, 3400 Broadway, Gary IN 46408 (United States); Departamento de Física, Cinvestav, A.P. 14-740, 07000 México D.F. (Mexico); Fernández C, David J., E-mail: david@fis.cinvestav.mx [Departamento de Física, Cinvestav, A.P. 14-740, 07000 México D.F. (Mexico)

    2014-11-15

    A simple way to find solutions of the Painlevé IV equation is by identifying Hamiltonian systems with third-order differential ladder operators. Some of these systems can be obtained by applying supersymmetric quantum mechanics (SUSY QM) to the harmonic oscillator. In this work, we will construct families of coherent states for such subset of SUSY partner Hamiltonians which are connected with the Painlevé IV equation. First, these coherent states are built up as eigenstates of the annihilation operator, then as displaced versions of the extremal states, both involving the related third-order ladder operators, and finally as extremal states which are also displaced but now using the so called linearized ladder operators. To each SUSY partner Hamiltonian corresponds two families of coherent states: one inside the infinite subspace associated with the isospectral part of the spectrum and another one in the finite subspace generated by the states created through the SUSY technique. - Highlights: • We use SUSY QM to obtain Hamiltonians with third-order differential ladder operators. • We show that these systems are related with the Painlevé IV equation. • We apply different definitions of coherent states to these Hamiltonians using the third-order ladder operators and some linearized ones. • We construct families of coherent states for such systems, which we called Painlevé IV coherent states.

  8. National Coastal Condition Report IV (2012)

    Science.gov (United States)

    The NCCR IV data shows an overall condition score of 3.0 for the nation’s coastal waters; although this score has improved substantially since 1990, the overall condition of the nation’s coastal resources continues to be rated fair.

  9. IVS: Current Status and Future Plans

    Science.gov (United States)

    Behrend, D.; Nothnagel, A.; Petrachenko, W. T.; Tuccari, G.

    2016-12-01

    The International VLBI Service for Geodesy and Astrometry (IVS) is a globally operating service that coordinates and performs Very Long Baseline Interferometry (VLBI) activities through its constituent components. The VLBI activities are associated with the creation, provision, dissemination, and archiving of relevant VLBI data and products. The products mostly pertain to the determination of the celestial and terrestrial reference frames, the Earth orientation parameters (EOP), atmospheric parameters as well as other ancillary parameters. The IVS observational network currently consists of about 40 radio telescopes worldwide. Subsets of these telescopes (8-12 stations) participate in 24-hour observing sessions that are run several times per week and in 1-hour intensive sessions for UT1 determination every day. The current VLBI network was developed mainly in the 1970s and 1980s. A number of factors, including aging infrastructure and demanding new scientific requirements, started to challenge its future sustainability and relevance. In response, the IVS and other groups developed and started implementing the next generation VLBI system, called VGOS (VLBI Global Observing System), at existing and new sites. The VGOS network is expected to reach maturity in the early 2020s. We describe the current status, progress, and anticipated prospects of geodetic/astrometric VLBI and the IVS.

  10. Scylla IV-P theta pinch

    International Nuclear Information System (INIS)

    Bailey, A.G.; Chandler, G.I.; Ekdahl, C.A. Jr.; Lillberg, J.W.; Machalek, M.D.; Seibel, F.T.

    1976-01-01

    Scylla IV-P is a flexible, linear theta pinch designed to investigate high-density linear concepts, end-stoppering, alternate heating methods, and plasma injection techniques relevant to a pure fusion reactor and/or a fusion-fission hybrid system. The construction and experimental arrangement of the device are briefly described

  11. Gen IV Materials Handbook Implementation Plan

    International Nuclear Information System (INIS)

    Rittenhouse, P.; Ren, W.

    2005-01-01

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  12. Coordination and solvent extraction behaviour of oxozirconium(IV), thorium(IV) and dioxouranium(VI)

    International Nuclear Information System (INIS)

    Dash, K.C.

    1989-01-01

    The systematic liquid-liquid extraction behaviour of oxozirconium (IV), thorium(IV) and dioxouranium(VI) have been investigated using a number of synthesised and commercial chelating extractants. The synergism or antagonism for these processes in presence of neutral donor ligands have also been identified and the conditions for separation and isolation of pure individual metal ions have been established. The coordination behaviour of oxozirconium(IV), thorium(IV) and dioxouranium(VI) with a large number of mono- and polydentate ligands have been studied. With oxozirconium(IV), invariably always a cyclic, tetranuclear species is obtained, derived from the tetrameric structure of the parent ZrOCl 2 .8H 2 O which is actually (Zr 4 (OH) 8 (H 2 O) 16 )Cl 8 .12H 2 O. No simple, monomeric oxozirconium(IV) complex was obtained. Uranium(VI) and thorium(IV) form a wide variety of complexes of higher coordination numbers and several bi- and trinuclear complexes were also characterised where the two adjacent metal centres are joined to each other by a double hydroxo-bridge. (author). 69 refs., 3 figs., 4 tabs

  13. Ehlers-Danlos syndrome type IV

    Directory of Open Access Journals (Sweden)

    Germain Dominique P

    2007-07-01

    Full Text Available Abstract Ehlers-Danlos syndrome type IV, the vascular type of Ehlers-Danlos syndromes (EDS, is an inherited connective tissue disorder defined by characteristic facial features (acrogeria in most patients, translucent skin with highly visible subcutaneous vessels on the trunk and lower back, easy bruising, and severe arterial, digestive and uterine complications, which are rarely, if at all, observed in the other forms of EDS. The estimated prevalence for all EDS varies between 1/10,000 and 1/25,000, EDS type IV representing approximately 5 to 10% of cases. The vascular complications may affect all anatomical areas, with a tendency toward arteries of large and medium diameter. Dissections of the vertebral arteries and the carotids in their extra- and intra-cranial segments (carotid-cavernous fistulae are typical. There is a high risk of recurrent colonic perforations. Pregnancy increases the likelihood of a uterine or vascular rupture. EDS type IV is inherited as an autosomal dominant trait that is caused by mutations in the COL3A1 gene coding for type III procollagen. Diagnosis is based on clinical signs, non-invasive imaging, and the identification of a mutation of the COL3A1 gene. In childhood, coagulation disorders and Silverman's syndrome are the main differential diagnoses; in adulthood, the differential diagnosis includes other Ehlers-Danlos syndromes, Marfan syndrome and Loeys-Dietz syndrome. Prenatal diagnosis can be considered in families where the mutation is known. Choriocentesis or amniocentesis, however, may entail risk for the pregnant woman. In the absence of specific treatment for EDS type IV, medical intervention should be focused on symptomatic treatment and prophylactic measures. Arterial, digestive or uterine complications require immediate hospitalisation, observation in an intensive care unit. Invasive imaging techniques are contraindicated. Conservative approach is usually recommended when caring for a vascular

  14. Ehlers-Danlos syndrome type IV

    Science.gov (United States)

    Germain, Dominique P

    2007-01-01

    Ehlers-Danlos syndrome type IV, the vascular type of Ehlers-Danlos syndromes (EDS), is an inherited connective tissue disorder defined by characteristic facial features (acrogeria) in most patients, translucent skin with highly visible subcutaneous vessels on the trunk and lower back, easy bruising, and severe arterial, digestive and uterine complications, which are rarely, if at all, observed in the other forms of EDS. The estimated prevalence for all EDS varies between 1/10,000 and 1/25,000, EDS type IV representing approximately 5 to 10% of cases. The vascular complications may affect all anatomical areas, with a tendency toward arteries of large and medium diameter. Dissections of the vertebral arteries and the carotids in their extra- and intra-cranial segments (carotid-cavernous fistulae) are typical. There is a high risk of recurrent colonic perforations. Pregnancy increases the likelihood of a uterine or vascular rupture. EDS type IV is inherited as an autosomal dominant trait that is caused by mutations in the COL3A1 gene coding for type III procollagen. Diagnosis is based on clinical signs, non-invasive imaging, and the identification of a mutation of the COL3A1 gene. In childhood, coagulation disorders and Silverman's syndrome are the main differential diagnoses; in adulthood, the differential diagnosis includes other Ehlers-Danlos syndromes, Marfan syndrome and Loeys-Dietz syndrome. Prenatal diagnosis can be considered in families where the mutation is known. Choriocentesis or amniocentesis, however, may entail risk for the pregnant woman. In the absence of specific treatment for EDS type IV, medical intervention should be focused on symptomatic treatment and prophylactic measures. Arterial, digestive or uterine complications require immediate hospitalisation, observation in an intensive care unit. Invasive imaging techniques are contraindicated. Conservative approach is usually recommended when caring for a vascular complication in a patient suffering

  15. Identification of novel dipeptidyl peptidase IV (DPP-IV) inhibitory peptides in camel milk protein hydrolysates.

    Science.gov (United States)

    Nongonierma, Alice B; Paolella, Sara; Mudgil, Priti; Maqsood, Sajid; FitzGerald, Richard J

    2018-04-01

    Nine novel dipeptidyl peptidase IV (DPP-IV) inhibitory peptides (FLQY, FQLGASPY, ILDKEGIDY, ILELA, LLQLEAIR, LPVP, LQALHQGQIV, MPVQA and SPVVPF) were identified in camel milk proteins hydrolysed with trypsin. This was achieved using a sequential approach combining liquid chromatography tandem mass spectrometry (LC-MS/MS), qualitative/quantitative structure activity relationship (QSAR) and confirmatory studies with synthetic peptides. The most potent camel milk protein-derived DPP-IV inhibitory peptides, LPVP and MPVQA, had DPP-IV half maximal inhibitory concentrations (IC 50 ) of 87.0 ± 3.2 and 93.3 ± 8.0 µM, respectively. DPP-IV inhibitory peptide sequences identified within camel and bovine milk protein hydrolysates generated under the same hydrolysis conditions differ. This was linked to differences in enzyme selectivity for peptide bond cleavage of camel and bovine milk proteins as well as dissimilarities in their amino acid sequences. Camel milk proteins contain novel DPP-IV inhibitory peptides which may play a role in the regulation of glycaemia in humans. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. DSM-IV hypochondriasis in primary care.

    Science.gov (United States)

    Escobar, J I; Gara, M; Waitzkin, H; Silver, R C; Holman, A; Compton, W

    1998-05-01

    The object of this study was to assess the prevalence and correlates of the DSM-IV diagnosis of hypochondriasis in a primary care setting. A large sample (N = 1456) of primary care users was given a structured interview to make diagnoses of mood, anxiety, and somatoform disorders and estimate levels of disability. The prevalence of hypochondriasis (DSM-IV) was about 3%. Patients with this disorder had higher levels of medically unexplained symptoms (abridged somatization) and were more impaired in their physical functioning than patients without the disorder. Of the various psychopathologies examined, major depressive syndromes were the most frequent among patients with hypochondriasis. Interestingly, unlike somatization disorder, hypochondriasis was not related to any demographic factor. Hypochondriasis is a relatively rare condition in primary care that is largely separable from somatization disorder but seems closely intertwined with the more severe depressive syndromes.

  17. OFF, Open source Finite volume Fluid dynamics code: A free, high-order solver based on parallel, modular, object-oriented Fortran API

    Science.gov (United States)

    Zaghi, S.

    2014-07-01

    OFF, an open source (free software) code for performing fluid dynamics simulations, is presented. The aim of OFF is to solve, numerically, the unsteady (and steady) compressible Navier-Stokes equations of fluid dynamics by means of finite volume techniques: the research background is mainly focused on high-order (WENO) schemes for multi-fluids, multi-phase flows over complex geometries. To this purpose a highly modular, object-oriented application program interface (API) has been developed. In particular, the concepts of data encapsulation and inheritance available within Fortran language (from standard 2003) have been stressed in order to represent each fluid dynamics "entity" (e.g. the conservative variables of a finite volume, its geometry, etc…) by a single object so that a large variety of computational libraries can be easily (and efficiently) developed upon these objects. The main features of OFF can be summarized as follows: Programming LanguageOFF is written in standard (compliant) Fortran 2003; its design is highly modular in order to enhance simplicity of use and maintenance without compromising the efficiency; Parallel Frameworks Supported the development of OFF has been also targeted to maximize the computational efficiency: the code is designed to run on shared-memory multi-cores workstations and distributed-memory clusters of shared-memory nodes (supercomputers); the code's parallelization is based on Open Multiprocessing (OpenMP) and Message Passing Interface (MPI) paradigms; Usability, Maintenance and Enhancement in order to improve the usability, maintenance and enhancement of the code also the documentation has been carefully taken into account; the documentation is built upon comprehensive comments placed directly into the source files (no external documentation files needed): these comments are parsed by means of doxygen free software producing high quality html and latex documentation pages; the distributed versioning system referred as git

  18. Generation-IV nuclear reactors, SFR concept

    International Nuclear Information System (INIS)

    Dufour, P.

    2010-01-01

    In this presentation author deals with development of sodium-cooled fast reactors and lead-cooled fast reactors. He concluded that: - SFR is a proved concept that has never achieved industrial deployment; - The GEN IV objectives need to reconsider the design of both the core and the reactor design : innovations are being analysed; Future design will benefit from considerable feedback of design, licensing, construction and operation of PX, SPX, etc.

  19. Generation IV nuclear plant design strategies

    International Nuclear Information System (INIS)

    Altin, V.

    2007-01-01

    In this presentation Generation IV nuclear reactor design criteria are examined under the light of known nuclear properties of fissile and fertile nuclei. Their conflicting nature is elucidated along with the resulting inevitability of a multitude of designs. The designs selected as candidates for further development are evaluated with respect to their potential to serve the different design criteria, thereby revealing their more difficult aspects of realization and the strong research challenges lying ahead

  20. Genome Sequencing and Analysis Conference IV

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    J. Craig Venter and C. Thomas Caskey co-chaired Genome Sequencing and Analysis Conference IV held at Hilton Head, South Carolina from September 26--30, 1992. Venter opened the conference by noting that approximately 400 researchers from 16 nations were present four times as many participants as at Genome Sequencing Conference I in 1989. Venter also introduced the Data Fair, a new component of the conference allowing exchange and on-site computer analysis of unpublished sequence data.

  1. United Arab Emirates; 2013 Article IV Consultation

    OpenAIRE

    International Monetary Fund

    2013-01-01

    This staff report on United Arab Emirates 2013 Article IV Consultation highlights economic policies and development. Against a backdrop of political stability, confidence has further increased, tourism has been firm, demand from expatriates from the broader region has increased, and capital inflows have strengthened amid high global liquidity. The real estate sector, which had been impaired since the 2009 crisis, has stabilized in Abu Dhabi and has started to recover in Dubai. Dubai aims to b...

  2. Dipyridinium tribromidochloridobis(4-chlorophenylstannate(IV

    Directory of Open Access Journals (Sweden)

    Kong Mun Lo

    2009-06-01

    Full Text Available The tin atom in the substituted ammonium stannate(IV, (C5H6N2[SnBr3(C6H4Cl2Cl], lies on a center of symmetry in a distorted octahedral coordination geometry. Each independent halogen site is occupied by bromine and chlorine anions in an approximate 3:1 ratio. The pyridinium cation forms a hydrogen bond to only one of the halogen atoms.

  3. Structure of tetrakis(salicylaldehydato)thorium(IV)

    Energy Technology Data Exchange (ETDEWEB)

    Hill, R J; Rickard, C E.F. [Auckland Univ. (New Zealand). Dept. of Chemistry

    1977-01-01

    The structure of tetrakis(salicylaldehydato)thorium(IV) has been determined by single crystal X-ray crystallography. The crystals are tetragonal, a = 10.214, b = 23.744 A, space group P4/sub 1/. The molecules are eight coordinate, the coordination polyhedron being a dodecahedron with approximate Dsub(2d) symmetry. The dodecahedral A sites are occupied by the aldehydic oxygens and the phenolic oxygens occupy the B sites.

  4. IVS contribution to the next ITRF

    Science.gov (United States)

    Bachmann, Sabine; Messerschmitt, Linda; Thaller, Daniela

    2015-04-01

    Generating the contribution of the International VLBI Service (IVS) to the next ITRF (ITRF2013 or ITRF2014) was the main task of the IVS Combination Center at the Federal Agency for Cartography and Geodesy (BKG, Germany) in 2014. Starting with the ITRF2005, the IVS contribution to the ITRF is an intra-technique combined solution using multiple individual contributions from different institutions. For the upcoming ITRF ten international institutions submitted data files for a combined solution. The data files contain 24h VLBI sessions from the late 1970s until the end of 2014 in SINEX file format containing datum free normal equations with station coordinates and Earth Orientation Parameters (EOP). All contributions have to meet the IVS standards for ITRF contribution in order to guarantee a consistent combined solution. In the course of the generation of the intra-technique combined solution, station coordinate time series for each station as well as a Terrestrial Reference Frame based on the contributed VLBI data (VTRF) were generated and analyzed. Preliminary results using data until the end of 2013 show a scaling factor of -0.47 ppb resulting from a 7-parameter Helmert transformation of the VTRF w.r.t. ITRF2008, which is comparable to the scaling factor that was determined in the precedent ITRF generation. An internal comparison of the EOPs between the combined solution and the individual contributions as well as external comparisons of the EOP series were carried out in order to assure a consistent quality of the EOPs. The data analyses, the combination procedure and results of the combined solution for station coordinates and EOP will be presented.

  5. Sandia Pulse Reactor-IV Project

    International Nuclear Information System (INIS)

    Reuscher, J.A.

    1983-01-01

    Sandia National Laboratories has developed, designed and operated fast burst reactors for over 20 years. These reactors have been used for a variety of radiation effects programs. During this period, programs have required larger irradiation volumes primarily to expose complex electronic systems to postulated threat environments. As experiment volumes increased, a new reactor was built so that these components could be tested. The Sandia Pulse Reactor-IV is a logical evolution of the two decades of fast burst reactor development at Sandia

  6. Plutonium(IV) hydrous polymer chemistry

    International Nuclear Information System (INIS)

    Toth, L.M.; Dodson, K.E.

    1985-01-01

    The hydrous polymer chemistry of Pu(IV) in aqueous nitric acid solutions has been a subject of considerable interest for several years. This interest stems mainly from the fact that most nuclear fuel reprocessing schemes based on the Purex process can be hampered by the occurrence of polymer. As a result, an understanding and control of the parameters that affect polymer formation during reprocessing are studied. 2 refs

  7. Ionizing radiation risk assessment, BEIR IV

    International Nuclear Information System (INIS)

    1991-10-01

    This report of the Subpanel discusses the potential impact on Federal agencies and indicates individual risk factors that could be used by them in risk assessment. The approach used in this CIRRPC report was to consider the risk factors presented in BEIR IV for each radionuclide (or group radioelements) and to make some judgments regarding their validity and/or the uncertainties involved. The coverage of Radon-222 and its progeny dominated the BEIR IV report and this Subpanel felt is was proper to devote more attention to this radionuclide family. This risk factor presented in BEIR IV for radon is 350 cancer deaths per million person-working level months (WLM) of exposure for a lifetime. There is a range of opinions on the conversion from WLM to absorbed dose. As discussed in the text, the use of the WLM concept makes it difficult or infeasible to compare the risk factor for radon with that of other radionuclides which are based on organ dose. This report also includes a discussion of certain fundamental scientific and operational issues that may have decisive effect upon risk factor selection. These adjunct items are dealt with under separate headings and include discussions of threshold dose considerations, extrapolation to low doses, and age at exposure

  8. Revised and extended analysis of Br IV

    International Nuclear Information System (INIS)

    Riyaz, A.; Rahimullah, K.; Tauheed, A.

    2014-01-01

    The spectrum of three-times ionized bromine Br IV has been studied in the 319–2350 Å wavelength region. The spectrum was recorded on a 3-m normal incidence vacuum spectrograph at the St. Francis Xavier University, Antigonish (Canada) and 6.65-m grazing incidence spectrograph at the Zeeman laboratory (Amsterdam). The light sources used were a triggered spark and sliding spark, respectively. The ground configuration of Br IV 3d 10 4s 2 4p 2 , the excited configurations 3d 10 4s4p 3 +3d 10 4s 2 4p (4d+5d+6d+5s+6s+7s) in the odd parity system and 3d 10 4s 2 4p (5p+4f+5f)+3d 10 4s4p 2 (4d+5s)+3d 10 4p 4 in the even parity system have been studied. Relativistic Hartree–Fock (HFR) and least squares fitted (LSF) parametric calculations were used to interpret the observed spectrum. 120 Levels of Br IV have now been established, 58 being new. Among 424 spectral lines, 277 are newly classified. The levels 4s4p 35 S 2 , 4s 2 4p4d 3 F 4 and 4p5p ( 3 P 0,1 , 3 D 1,2 , 3 S 1 ) are revised. We estimate the accuracy of our measured wavelength for sharp and unblended lines to be ±0.005 Å. The ionization limit is determined as 385,390±100 cm −1 (47.782±0.012 eV). -- Highlights: • The spectrum of Br was recorded on a 3-m spectrograph with triggered spark source. • Atomic transitions for Br IV were identified to established new energy levels. • CI calculations with relativistic corrections were made for theoretical predictions. • Weighted oscillator strength (gf) and transition probabilities (gA) were calculated. • Ionization potential of Br IV was determined experimentally

  9. A novel auto-correlation function method and FORTRAN codes for the determination of the decay ratio in BWR stability analysis

    International Nuclear Information System (INIS)

    Behringer, K.

    2001-08-01

    A novel auto-correlation function (ACF) method has been investigated for determining the oscillation frequency and the decay ratio in BWR stability analyses. The report describes not only the method but also documents comprehensively the used and developed FORTRAN codes. The neutron signals are band-pass filtered to separate the oscillation peak in the power spectral density (PSD) from background. Two linear second-order oscillation models are considered. The ACF of each model, corrected for signal filtering and with the inclusion of a background term under the peak in the PSD, is then least-squares fitted to the ACF estimated on the previously filtered neutron signals, in order to determine the oscillation frequency and the decay ratio. The procedures of filtering and ACF estimation use fast Fourier transform techniques with signal segmentation. Gliding 'short-time' ACF estimates along a signal record allow the evaluation of uncertainties. Some numerical results are given which have been obtained from neutron signal data offered by the recent Forsmark I and Forsmark II NEA benchmark project. They are compared with those from other benchmark participants using different other analysis methods. (author)

  10. Calibration parameters used to simulate streamflow from application of the Hydrologic Simulation Program-FORTRAN Model (HSPF) to mountainous basins containing coal mines in West Virginia

    Science.gov (United States)

    Atkins, John T.; Wiley, Jeffrey B.; Paybins, Katherine S.

    2005-01-01

    This report presents the Hydrologic Simulation Program-FORTRAN Model (HSPF) parameters for eight basins in the coal-mining region of West Virginia. The magnitude and characteristics of model parameters from this study will assist users of HSPF in simulating streamflow at other basins in the coal-mining region of West Virginia. The parameter for nominal capacity of the upper-zone storage, UZSN, increased from south to north. The increase in UZSN with the increase in basin latitude could be due to decreasing slopes, decreasing rockiness of the soils, and increasing soil depths from south to north. A special action was given to the parameter for fraction of ground-water inflow that flows to inactive ground water, DEEPFR. The basis for this special action was related to the seasonal movement of the water table and transpiration from trees. The models were most sensitive to DEEPFR and the parameter for interception storage capacity, CEPSC. The models were also fairly sensitive to the parameter for an index representing the infiltration capacity of the soil, INFILT; the parameter for indicating the behavior of the ground-water recession flow, KVARY; the parameter for the basic ground-water recession rate, AGWRC; the parameter for nominal capacity of the upper zone storage, UZSN; the parameter for the interflow inflow, INTFW; the parameter for the interflow recession constant, IRC; and the parameter for lower zone evapotranspiration, LZETP.

  11. TRIGRS - A Fortran Program for Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Analysis, Version 2.0

    Science.gov (United States)

    Baum, Rex L.; Savage, William Z.; Godt, Jonathan W.

    2008-01-01

    The Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Model (TRIGRS) is a Fortran program designed for modeling the timing and distribution of shallow, rainfall-induced landslides. The program computes transient pore-pressure changes, and attendant changes in the factor of safety, due to rainfall infiltration. The program models rainfall infiltration, resulting from storms that have durations ranging from hours to a few days, using analytical solutions for partial differential equations that represent one-dimensional, vertical flow in isotropic, homogeneous materials for either saturated or unsaturated conditions. Use of step-function series allows the program to represent variable rainfall input, and a simple runoff routing model allows the user to divert excess water from impervious areas onto more permeable downslope areas. The TRIGRS program uses a simple infinite-slope model to compute factor of safety on a cell-by-cell basis. An approximate formula for effective stress in unsaturated materials aids computation of the factor of safety in unsaturated soils. Horizontal heterogeneity is accounted for by allowing material properties, rainfall, and other input values to vary from cell to cell. This command-line program is used in conjunction with geographic information system (GIS) software to prepare input grids and visualize model results.

  12. A novel auto-correlation function method and FORTRAN codes for the determination of the decay ratio in BWR stability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Behringer, K

    2001-08-01

    A novel auto-correlation function (ACF) method has been investigated for determining the oscillation frequency and the decay ratio in BWR stability analyses. The report describes not only the method but also documents comprehensively the used and developed FORTRAN codes. The neutron signals are band-pass filtered to separate the oscillation peak in the power spectral density (PSD) from background. Two linear second-order oscillation models are considered. The ACF of each model, corrected for signal filtering and with the inclusion of a background term under the peak in the PSD, is then least-squares fitted to the ACF estimated on the previously filtered neutron signals, in order to determine the oscillation frequency and the decay ratio. The procedures of filtering and ACF estimation use fast Fourier transform techniques with signal segmentation. Gliding 'short-time' ACF estimates along a signal record allow the evaluation of uncertainties. Some numerical results are given which have been obtained from neutron signal data offered by the recent Forsmark I and Forsmark II NEA benchmark project. They are compared with those from other benchmark participants using different other analysis methods. (author)

  13. Synthesis and evaluation of artificial antigens for astragaloside IV

    Directory of Open Access Journals (Sweden)

    Sheng-lan Yu

    Full Text Available The objective of this study was to produce artificial antigens for astragaloside IV that could be used to prepare antibodies against astragaloside IV screened in Radix astragali (Astragalus membranaceus (Fisch Bunge, Fabaceae and its preparations, using an indirect ELISA. Astragaloside IV was coupled to carrier proteins, bovine serum albumin and ovalbumin using the sodium periodate method and was then evaluated using SDS-PAGE, MALDI-TOF MS and animal immunizations. The coupling ratio of astragaloside IV to bovine serum albumin ratio was determined to be thirteen, and the indirect ELISA demonstrated that three groups of mice immunized with astragaloside IV-bovine serum albumin produced anti-astragaloside IV- bovine serum albumin-specific antibody, with a minimum serum titer of 1:9600. A method for synthesizing highly immunogenic astragaloside IV artificial antigens was successfully developed thus indicating its feasibility in the establishment of a fast immunoassay for astragaloside IV content determination in Radix astragali and its products.

  14. Device and machine independent recording of graphic information in the list 'Bilderbuch'

    International Nuclear Information System (INIS)

    Egloff, P.; Foest, G.; Maiss, G.; Rocholl, M.; Thulke, A.; Tschammer, V.

    1976-07-01

    'Bilderbuch' (picture book) is a data file in which any kind of graphic information can be stored in an optimum fashion with respect to space. It represents the core of the GRAFIX system, an interconnected computer system. Graphic information can be transferred between computers; it is independent of the graphic terminals connected to the computers. The representation is independent of the operating systems of the computers and the different versions of programming languages. The structure of 'Bilderbuch' is described. (WB) [de

  15. Multi Canister Overpack (MCO) Handling Machine - Independent Review of Seismic Structural Analysis

    International Nuclear Information System (INIS)

    SWENSON, C.E.

    2000-01-01

    The following separate reports and correspondence pertains to the independent review of the seismic analysis. The original analysis was performed by GEC-Alsthom Engineering Systems Limited (GEC-ESL) under subcontract to Foster-Wheeler Environmental Corporation (FWEC) who was the prime integration contractor to the Spent Nuclear Fuel Project for the Multi-Canister Overpack (MCO) Handling Machine (MHM). The original analysis was performed to the Design Basis Earthquake (DBE) response spectra using 5% damping as required in specification, HNF-S-0468 for the 90% Design Report in June 1997. The independent review was performed by Fluor-Daniel (Irvine) under a separate task from their scope as Architect-Engineer of the Canister Storage Building (CSB) in 1997. The comments were issued in April 1998. Later in 1997, the response spectra of the Canister Storage Building (CSB) was revised according to a new soil-structure interaction analysis and accordingly revised the response spectra for the MHM and utilized 7% damping in accordance with American Society of Mechanical Engineers (ASME) NOG-1, ''Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder).'' The analysis was re-performed to check critical areas but because manufacturing was underway, designs were not altered unless necessary. FWEC responded to SNF Project correspondence on the review comments in two separate letters enclosed. The dispositions were reviewed and accepted. Attached are supplier source surveillance reports on the procedures and process by the engineering group performing the analysis and structural design. All calculation and analysis results are contained in the MHM Final Design Report which is part of the Vendor Information File 50100. Subsequent to the MHM supplier engineering analysis, there was a separate analyses for nuclear safety accident concerns that used the electronic input data files provided by FWEC/GEC-ESL and are contained in document SNF-6248, ''Evaluation of MHM Uplift Restraint for Seismic Event During Repositioning Operations,'' (EDT-629126 and EDT-629132)

  16. Multi Canister Overpack (MCO) Handling Machine Independent Review of Seismic Structural Analysis

    Energy Technology Data Exchange (ETDEWEB)

    SWENSON, C.E.

    2000-09-22

    The following separate reports and correspondence pertains to the independent review of the seismic analysis. The original analysis was performed by GEC-Alsthom Engineering Systems Limited (GEC-ESL) under subcontract to Foster-Wheeler Environmental Corporation (FWEC) who was the prime integration contractor to the Spent Nuclear Fuel Project for the Multi-Canister Overpack (MCO) Handling Machine (MHM). The original analysis was performed to the Design Basis Earthquake (DBE) response spectra using 5% damping as required in specification, HNF-S-0468 for the 90% Design Report in June 1997. The independent review was performed by Fluor-Daniel (Irvine) under a separate task from their scope as Architect-Engineer of the Canister Storage Building (CSB) in 1997. The comments were issued in April 1998. Later in 1997, the response spectra of the Canister Storage Building (CSB) was revised according to a new soil-structure interaction analysis and accordingly revised the response spectra for the MHM and utilized 7% damping in accordance with American Society of Mechanical Engineers (ASME) NOG-1, ''Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder).'' The analysis was re-performed to check critical areas but because manufacturing was underway, designs were not altered unless necessary. FWEC responded to SNF Project correspondence on the review comments in two separate letters enclosed. The dispositions were reviewed and accepted. Attached are supplier source surveillance reports on the procedures and process by the engineering group performing the analysis and structural design. All calculation and analysis results are contained in the MHM Final Design Report which is part of the Vendor Information File 50100. Subsequent to the MHM supplier engineering analysis, there was a separate analyses for nuclear safety accident concerns that used the electronic input data files provided by FWEC/GEC-ESL and are contained in document SNF-6248, ''Evaluation of MHM Uplift Restraint for Seismic Event During Repositioning Operations,'' (EDT-629126 and EDT-629132).

  17. A Si IV/O IV Electron Density Diagnostic for the Analysis of IRIS Solar Spectra

    Science.gov (United States)

    Young, P. R.; Keenan, F. P.; Milligan, R. O.; Peter, H.

    2018-04-01

    Solar spectra of ultraviolet bursts and flare ribbons from the Interface Region Imaging Spectrograph (IRIS) have suggested high electron densities of > {10}12 cm‑3 at transition region temperatures of 0.1 MK, based on large intensity ratios of Si IV λ1402.77 to O IV λ1401.16. In this work, a rare observation of the weak O IV λ1343.51 line is reported from an X-class flare that peaked at 21:41 UT on 2014 October 24. This line is used to develop a theoretical prediction of the Si IV λ1402.77 to O IV λ1401.16 ratio as a function of density that is recommended to be used in the high-density regime. The method makes use of new pressure-dependent ionization fractions that take account of the suppression of dielectronic recombination at high densities. It is applied to two sequences of flare kernel observations from the October 24 flare. The first shows densities that vary between 3× {10}12 and 3× {10}13 cm‑3 over a seven-minute period, while the second location shows stable density values of around 2× {10}12 cm‑3 over a three-minute period.

  18. Collagen type IV at the fetal-maternal interface

    OpenAIRE

    Oefner, C M; Sharkey, A; Gardner, L; Critchley, H; Oyen, M; Moffett, A

    2015-01-01

    Introduction Extracellular matrix proteins play a crucial role in influencing the invasion of trophoblast cells. However the role of collagens and collagen type IV (col-IV) in particular at the implantation site is not clear. Methods Immunohistochemistry was used to determine the distribution of collagen types I, III, IV and VI in endometrium and decidua during the menstrual cycle and the first trimester of pregnancy. Expression of col-IV alpha chains during the reproductive cycle ...

  19. Dipeptidyl peptidase IV inhibitory activity of protein hydrolyzates ...

    African Journals Online (AJOL)

    Background: Type 2 diabetes is a chronic metabolic disorder. Recently, dipeptidyl peptidase IV (DPP-IV) inhibitors that protect incretin hormones from being cleaved by DPP-IV have been used as drugs to control glycemia. This study examined the potential hypoglycemic effect of amaranth grain storage protein hydrolyzates ...

  20. 77 FR 64398 - Order of Succession for HUD Region IV

    Science.gov (United States)

    2012-10-19

    ... Region IV AGENCY: Office of Field Policy and Management, HUD. ACTION: Notice of Order of Succession... Field Offices (Region IV). This Order of Succession supersedes all previous Orders of Succession for HUD Region IV. DATES: Effective Date: October 9, 2012. FOR FURTHER INFORMATION CONTACT: Lawrence D. Reynolds...

  1. Revised and extended analysis of Br IV

    Science.gov (United States)

    Riyaz, A.; Rahimullah, K.; Tauheed, A.

    2014-01-01

    The spectrum of three-times ionized bromine Br IV has been studied in the 319-2350 Å wavelength region. The spectrum was recorded on a 3-m normal incidence vacuum spectrograph at the St. Francis Xavier University, Antigonish (Canada) and 6.65-m grazing incidence spectrograph at the Zeeman laboratory (Amsterdam). The light sources used were a triggered spark and sliding spark, respectively. The ground configuration of Br IV 3d104s24p2, the excited configurations 3d104s4p3+3d104s24p (4d+5d+6d+5s+6s+7s) in the odd parity system and 3d104s24p (5p+4f+5f)+3d104s4p2 (4d+5s)+3d104p4 in the even parity system have been studied. Relativistic Hartree-Fock (HFR) and least squares fitted (LSF) parametric calculations were used to interpret the observed spectrum. 120 Levels of Br IV have now been established, 58 being new. Among 424 spectral lines, 277 are newly classified. The levels 4s4p35S2, 4s24p4d 3F4 and 4p5p (3P0, 1, 3D1, 2, 3S1) are revised. We estimate the accuracy of our measured wavelength for sharp and unblended lines to be ±0.005 Å. The ionization limit is determined as 385,390±100 cm-1 (47.782±0.012 eV).

  2. Synthesis and characterization of thorium(IV) and uranium(IV) complexes with Schiff bases

    Energy Technology Data Exchange (ETDEWEB)

    Radoske, Thomas; Maerz, Juliane; Kaden, Peter; Patzschke, Michael; Ikeda-Ohno, Atsushi [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Chemistry of the F-Elements

    2017-06-01

    We report herein the synthesis and characterization of several imine complexes of tetravalent thorium (Th(IV)) and uranium (U(IV)). The ligands investigated in this study are a Schiff base type, including the well-known salen ligand (H{sub 2}Le, Fig. 1). The complexation in solution was investigated by NMR measurements indicating paramagnetic effects of unpaired f-electrons of U(IV) on the ligand molecule. We also determined the solid-state molecular structures of the synthesized complexes by single crystal X-ray diffraction. The synthesized complexes show an eight-fold coordination geometry around the actinide center surrounded by two tetradentate ligands with 2N- and 2O-donor atoms.

  3. The kinetics of the cerium(IV)-uranium(IV) reaction at low sulfate concentrations

    International Nuclear Information System (INIS)

    Michaille, P.; Kikindai, T.

    1977-01-01

    The rate of oxidation of uranium(IV) by cerium(IV) was measured with a stopped-flow spectrophotometer at sulfuric acid concentrations of 2 x 10 -6 to 0.5 M. At a constant hydrogen ion concentration of 0.5 M, the maximum rate constant was observed for 2 x 10 -3 M sulfuric acid; at that concentration, two sulfate ions were involved in the activated complex. The dependence of the rate constant on the hydrogen ion concentration showed that the reaction paths involving one or two sulfate ions also involved one hydroxyl ion, whereas one hydrogen ion was involved in the five sulfate dependent path. Spectrophotometric measurements supported the existence of a hydrolyzed monosulfatocomplex of cerium(IV). (author)

  4. Thorium(IV) and zirconium(IV) complexes of oxygen donor ligands. Pt. 12

    International Nuclear Information System (INIS)

    Agarwal, R.K.; Jain, P.C.; Kapur, V.; Sharma, S.; Srivastava, A.K.

    1980-01-01

    Crystalline thorium (IV) chelates with mono N-oxides of 2,2'-bipyridine (bipyNO) and 1,10-phenanthroline (phenNO), ThX 4 x 2L(X = Cl,Br,NO 3 or NCS) and ThX 4 x 3L(X = I or ClO 4 and L = bipyNO or phenNO) have been synthesised and characterized on the basis of i.r. spectra, molar conductance, molecular weights, t.g.a. and d.t.a. data. All the complexes are weakly diamagnetic and contain bipyNO and phenNO bonded to thorium(IV) through nitrogen and oxygen. The coordination number of thorium(IV) varies from six to twelve depending on the nature of the anions. (orig.) [de

  5. Gen IV Materials Handbook Functionalities and Operation

    International Nuclear Information System (INIS)

    Ren, Weiju

    2009-01-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  6. General report of Technical Committee IV

    International Nuclear Information System (INIS)

    Feinendegen, L.E.

    1979-01-01

    During the report period, work in section IV of the Committee was continued on the molecular, cellular and organic levels with the aim to elucidate the origin, course and treatment possibility of the syndrome that may occur in the mammalian organism upon acute and chronic ionizing irradiation as a function of the radiation dose received. The investigations dealt a.o. with the effect of O 2 in protein radiolysis, recovery processes of the haematopoietic stem cells, delayed effects in the gastrointestical tract subsequent to local irradiation, and combination damage in the lungs and liver of rats upon combined cytostatic and radiation therapy. (orig./HP) [de

  7. Research in collegiate mathematics education IV

    CERN Document Server

    Dubinsky, Ed; Kaput, Jim

    2001-01-01

    This fourth volume of Research in Collegiate Mathematics Education (RCME IV) reflects the themes of student learning and calculus. Included are overviews of calculus reform in France and in the U.S. and large-scale and small-scale longitudinal comparisons of students enrolled in first-year reform courses and in traditional courses. The work continues with detailed studies relating students' understanding of calculus and associated topics. Direct focus is then placed on instruction and student comprehension of courses other than calculus, namely abstract algebra and number theory. The volume co

  8. A Gaussian IV estimator of cointegrating relations

    DEFF Research Database (Denmark)

    Bårdsen, Gunnar; Haldrup, Niels

    2006-01-01

    In static single equation cointegration regression modelsthe OLS estimator will have a non-standard distribution unless regressors arestrictly exogenous. In the literature a number of estimators have been suggestedto deal with this problem, especially by the use of semi-nonparametricestimators. T......In static single equation cointegration regression modelsthe OLS estimator will have a non-standard distribution unless regressors arestrictly exogenous. In the literature a number of estimators have been suggestedto deal with this problem, especially by the use of semi...... in cointegrating regressions. These instruments are almost idealand simulations show that the IV estimator using such instruments alleviatethe endogeneity problem extremely well in both finite and large samples....

  9. New Materials for NGNP/Gen IV

    International Nuclear Information System (INIS)

    Swindeman, Robert W.; Marriott, Douglas L.

    2009-01-01

    The bounding conditions were briefly summarized for the Next Generation Nuclear Plant (NGNP) that is the leading candidate in the Department of Energy Generation IV reactor program. Metallic materials essential to the successful development and proof of concept for the NGNP were identified. The literature bearing on the materials technology for high-temperature gas-cooled reactors was reviewed with emphasis on the needs identified for the NGNP. Several materials were identified for a more thorough study of their databases and behavioral features relative to the requirements ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NH.

  10. Gen IV Materials Handbook Functionalities and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  11. Topological characterisation and identification of critical domains within glucosyltransferase IV (GtrIV of Shigella flexneri

    Directory of Open Access Journals (Sweden)

    Nair Anesh

    2011-12-01

    Full Text Available Abstract Background The three bacteriophage genes gtrA, gtrB and gtr(type are responsible for O-antigen glucosylation in Shigella flexneri. Both gtrA and gtrB have been demonstrated to be highly conserved and interchangeable among serotypes while gtr(type was found to be specific to each serotype, leading to the hypothesis that the Gtr(type proteins are responsible for attaching glucosyl groups to the O-antigen in a site- and serotype- specific manner. Based on the confirmed topologies of GtrI, GtrII and GtrV, such interaction and attachment of the glucosyl groups to the O-antigen has been postulated to occur in the periplasm. Results In this study, the topology of GtrIV was experimentally determined by creating different fusions between GtrIV and a dual-reporter protein, PhoA/LacZ. This study shows that GtrIV consists of 8 transmembrane helices, 2 large periplasmic loops, 2 small cytoplasmic N- and C- terminal ends and a re-entrant loop that occurs between transmembrane helices III and IV. Though this topology differs from that of GtrI, GtrII, GtrV and GtrX, it is very similar to that of GtrIc. Furthermore, both the N-terminal periplasmic and the C-terminal periplasmic loops are important for GtrIV function as shown via a series of loop deletion experiments and the creation of chimeric proteins between GtrIV and its closest structural homologue, GtrIc. Conclusion The current study provides the basis for elucidating the structure and mechanism of action of this important O-antigen modifying glucosyltransferase.

  12. On the stabilization of NbV-solutions by ZrIV and HfIV

    International Nuclear Information System (INIS)

    Soerensen, E.; Bjerre, A.B.

    1987-11-01

    Niobium cannot be separated from zirconium or hafnium when these elements occur together in solution with common anions such as Cl- and SO 4 --. This is ascribed to the copolymerisation of Nb v and the hydrolyzed ionic species of Zr IV v and Hf IV by which the colloidal particles are masked as Zr- and Hf-compounds. In HCl the particles are positively charged as opposed to when they are in sulphate solution where the Zr- and Hf- sulphate complexes confer a negative charge. The two cases are considered separately. (author)

  13. Spectroscopy study of ceramic pigments based on Ce(IV)-Pr(IV) oxide

    International Nuclear Information System (INIS)

    Furtado, L.; Toma, H.E.

    1991-01-01

    The synthesis and spectroscopic properties of a series of cerium(IV)-praseodimium(IV) oxide pigments are reported. The pigments exhibit brick-red colours and are suitable for ceramic applications because of their high temperature stability. Electronic absorption spectra of the pigments suspended in a gel matrix of polyvinyl alcohol-sodium tetradecaborate mixture, consists of broad band with gaussian components at 372 and 472nm. These bands are described to charge -transfer transitions from the occupied oxygen p-orbitals to the empty f levels of the lanthanides. (author)

  14. After SDSS-IV: Pioneering Panoptic Spectroscopy

    Science.gov (United States)

    Kollmeier, Juna; AS4 Collaboration

    2018-01-01

    I will describe the current plans for a next generation sky survey that will begin After SDSS-IV --- AS4. AS4 will be an unprecedented all-sky spectroscopic survey of over six million objects. It is designed to decode the history of the Milky Way galaxy, trace the emergence of the chemical elements, reveal the inner workings of stars, the growth of black holes, and investigate the origin of planets. It will provide the most comprehensive all-sky spectroscopy to multiply the science from the Gaia, TESS and eROSITA missions. AS4 will also create a contiguous spectroscopic map of the interstellar gas in the Milky Way and nearby galaxies that is 1,000 times larger than the state of the art, uncovering the self-regulation mechanisms of Galactic ecosystems. It will pioneer systematic, spectroscopic monitoring across the whole sky, revealing changes on timescales from 20 minutes to 20 years. The project is now developing new hardware to build on the SDSS-IV infrastructure, designing the detailed survey strategy, and actively seeking to complete its consortium of institutional and individual members.

  15. ARIES-IV Nested Shell Blanket Design

    International Nuclear Information System (INIS)

    Wong, C.P.C.; Redler, K.; Reis, E.E.; Will, R.; Cheng, E.; Hasan, C.M.; Sharafat, S.

    1993-11-01

    The ARIES-IV Nested Shell Blanket (NSB) Design is an alternate blanket concept of the ARIES-IV low activation helium-cooled reactor design. The reference design has the coolant routed in the poloidal direction and the inlet and outlet plena are located at the top and bottom of the torus. The NSB design has the high velocity coolant routed in the toroidal direction and the plena are located behind the blanket. This is of significance since the selected structural material is SiC-composite. The NSB is designed to have key high performance components with characteristic dimensions of no larger than 2 m. These components can be brazed to form the blanket module. For the diverter design, we eliminated the use of W as the divertor coating material by relying on the successful development of the gaseous divertor concept. The neutronics and thermal-hydraulic performance of both blanket concepts are similar. The selected blanket and divertor configurations can also meet all the projected structural, neutronics and thermal-hydraulics design limits and requirements. With the selected blanket and divertor materials, the design has a level of safety assurance rate of I (LSA-1), which indicates an inherently safe design

  16. Development of generation IV nuclear energy systems

    International Nuclear Information System (INIS)

    Matsui, Kazuaki; Oka, Yoshiaki; Ogawa, Masuro; Ichimiya, Masakazu; Noda, Hiroshi

    2003-01-01

    The fifth 'Generation IV International Forum (GIF), Policy Group Meetings' was held at the Zen-Nikku Hotel in Tokyo, on September 19-20, 2002, under participations of Abraham, Secretary of DOE in U.S.A., Columbani, Secretary of CEA in France, Fujiie, Chairman of CAE in Japan, Kano, Parliamental Minister of MIS in Japan, and so on. Ten nations entering GIF (Argentina, Brazil, Canada, France, Japan, Korea, South Africa, Switzerland, U.K., and U.S.A.) selected six next generation nuclear energy concepts for objects of international cooperative research and development aiming at its practice by 2030. These concepts applicable to not only power generation, but also hydrogen production, sea water purification, and so on, are sodium liquid metal cooled reactor (Japan), high temperature gas cooled reactor (France), Super-critical pressure water cooled reactor (SCWR: Canada), Lead metal cooled reactor (Switzerland), Gas cooled fast reactor (U.S.A.), and molten salts reactor. On the generation IV nuclear reactor systems aiming to further upgrade their sustainability, safety, economical efficiency, and nuclear non proliferation, the 'Plans on Technical Development' (Road-map) to decide priority of their R and Ds has been cooperatively discussed under frameworks of international research cooperation by the GIF members nations. Here were shared descriptions on nuclear fuel cycle as a remise of technical evaluation and adopted concepts by Japanese participants contributing to making up the Road-map. (G.K.)

  17. Predicting DPP-IV inhibitors with machine learning approaches

    Science.gov (United States)

    Cai, Jie; Li, Chanjuan; Liu, Zhihong; Du, Jiewen; Ye, Jiming; Gu, Qiong; Xu, Jun

    2017-04-01

    Dipeptidyl peptidase IV (DPP-IV) is a promising Type 2 diabetes mellitus (T2DM) drug target. DPP-IV inhibitors prolong the action of glucagon-like peptide-1 (GLP-1) and gastric inhibitory peptide (GIP), improve glucose homeostasis without weight gain, edema, and hypoglycemia. However, the marketed DPP-IV inhibitors have adverse effects such as nasopharyngitis, headache, nausea, hypersensitivity, skin reactions and pancreatitis. Therefore, it is still expected for novel DPP-IV inhibitors with minimal adverse effects. The scaffolds of existing DPP-IV inhibitors are structurally diversified. This makes it difficult to build virtual screening models based upon the known DPP-IV inhibitor libraries using conventional QSAR approaches. In this paper, we report a new strategy to predict DPP-IV inhibitors with machine learning approaches involving naïve Bayesian (NB) and recursive partitioning (RP) methods. We built 247 machine learning models based on 1307 known DPP-IV inhibitors with optimized molecular properties and topological fingerprints as descriptors. The overall predictive accuracies of the optimized models were greater than 80%. An external test set, composed of 65 recently reported compounds, was employed to validate the optimized models. The results demonstrated that both NB and RP models have a good predictive ability based on different combinations of descriptors. Twenty "good" and twenty "bad" structural fragments for DPP-IV inhibitors can also be derived from these models for inspiring the new DPP-IV inhibitor scaffold design.

  18. Report for 2011 from the Bordeaux IVS Analysis Center

    Science.gov (United States)

    Charlot, Patrick; Bellanger, Antoine; Bourda, Geraldine; Collioud, Arnaud; Baudry, Alain

    2012-01-01

    This report summarizes the activities of the Bordeaux IVS Analysis Center during the year 2011. The work focused on (i) regular analysis of the IVS-R1 and IVS-R4 sessions with the GINS software package; (ii) systematic VLBI imaging of the RDV sessions and calculation of the corresponding source structure index and compactness values; (iii) imaging of the sources observed during the 2009 International Year of Astronomy IVS observing session; and (iv) continuation of our VLBI observational program to identify optically-bright radio sources suitable for the link with the future Gaia frame. Also of importance is the enhancement of the IVS LiveWeb site which now comprises all IVS sessions back to 2003, allowing one to search past observations for session-specific information (e.g. sources or stations).

  19. Comprehensive Performance Evaluation for Hydrological and Nutrients Simulation Using the Hydrological Simulation Program-Fortran in a Mesoscale Monsoon Watershed, China.

    Science.gov (United States)

    Li, Zhaofu; Luo, Chuan; Jiang, Kaixia; Wan, Rongrong; Li, Hengpeng

    2017-12-19

    The Hydrological Simulation Program-Fortran (HSPF) is a hydrological and water quality computer model that was developed by the United States Environmental Protection Agency. Comprehensive performance evaluations were carried out for hydrological and nutrient simulation using the HSPF model in the Xitiaoxi watershed in China. Streamflow simulation was calibrated from 1 January 2002 to 31 December 2007 and then validated from 1 January 2008 to 31 December 2010 using daily observed data, and nutrient simulation was calibrated and validated using monthly observed data during the period from July 2009 to July 2010. These results of model performance evaluation showed that the streamflows were well simulated over the study period. The determination coefficient ( R ²) was 0.87, 0.77 and 0.63, and the Nash-Sutcliffe coefficient of efficiency (Ens) was 0.82, 0.76 and 0.65 for the streamflow simulation in annual, monthly and daily time-steps, respectively. Although limited to monthly observed data, satisfactory performance was still achieved during the quantitative evaluation for nutrients. The R ² was 0.73, 0.82 and 0.92, and the Ens was 0.67, 0.74 and 0.86 for nitrate, ammonium and orthophosphate simulation, respectively. Some issues may affect the application of HSPF were also discussed, such as input data quality, parameter values, etc. Overall, the HSPF model can be successfully used to describe streamflow and nutrients transport in the mesoscale watershed located in the East Asian monsoon climate area. This study is expected to serve as a comprehensive and systematic documentation of understanding the HSPF model for wide application and avoiding possible misuses.

  20. Comparative Analysis of Inpatient Costs for Obstetrics and Gynecology Surgery Patients Treated With IV Acetaminophen and IV Opioids Versus IV Opioid-only Analgesia for Postoperative Pain.

    Science.gov (United States)

    Hansen, Ryan N; Pham, An T; Lovelace, Belinda; Balaban, Stela; Wan, George J

    2017-10-01

    Recovery from obstetrics and gynecology (OB/GYN) surgery, including hysterectomy and cesarean section delivery, aims to restore function while minimizing hospital length of stay (LOS) and medical expenditures. Our analyses compare OB/GYN surgery patients who received combination intravenous (IV) acetaminophen and IV opioid analgesia with those who received IV opioid-only analgesia and estimate differences in LOS, hospitalization costs, and opioid consumption. We performed a retrospective analysis of the Premier Database between January 2009 and June 2015, comparing OB/GYN surgery patients who received postoperative pain management with combination IV acetaminophen and IV opioids with those who received only IV opioids starting on the day of surgery and continuing up to the second postoperative day. We performed instrumental variable 2-stage least-squares regressions controlling for patient and hospital covariates to compare the LOS, hospitalization costs, and daily opioid doses (morphine equivalent dose) of IV acetaminophen recipients with that of opioid-only analgesia patients. We identified 225 142 OB/GYN surgery patients who were eligible for our study of whom 89 568 (40%) had been managed with IV acetaminophen and opioids. Participants averaged 36 years of age and were predominantly non-Hispanic Caucasians (60%). Multivariable regression models estimated statistically significant differences in hospitalization cost and opioid use with IV acetaminophen associated with $484.4 lower total hospitalization costs (95% CI = -$760.4 to -$208.4; P = 0.0006) and 8.2 mg lower daily opioid use (95% CI = -10.0 to -6.4), whereas the difference in LOS was not significant, at -0.09 days (95% CI = -0.19 to 0.01; P = 0.07). Compared with IV opioid-only analgesia, managing post-OB/GYN surgery pain with the addition of IV acetaminophen is associated with decreased hospitalization costs and reduced opioid use.

  1. Atlantic Flyway review: Region IV - Fall 2003

    Science.gov (United States)

    Robbins, Chandler S.

    2004-01-01

    We welcome the Eden Mill station in northeastern Maryland to Region IV this year. With three stations reporting their worst year ever, we really need to be refreshed. After a cool and wet July, August was hot and wet in the east. Temperatures in September remained close to normal, but thanks to tropical storms Henri (6-8 Sep) and Isabel (18 Sep), rainfall was excessive in the Chesapeake Bay states. The entire Northeast had cool weather in October, starting with an early freeze on 3 Oct that triggered some good banding days in our region. Precipitation was unusually spotty in October, but plentiful at most of the Region IV stations. November temperatures were consistently well above the norm, starting with a record-breaking 81 ø in Baltimore on the 1st.Four of the five Maryland stations had their best day on 19 or 20 Oct. One might expect some of the Virginia coastal stations, Chincoteague, Kiptopeke, and Back Bay, to share the same best day, but they did not. Three stations reported an increase in birds per net hour this year, while seven had a decline. Summarizing the changes in rank in Table 2, Gray Catbird was the species with the most (5) increases in rank (in excess of decreases), followed by junco (4) and Myrtle Warbler and Swamp Sparrow (3 each). Yellowthroat had the most decreases (5), followed by redstart (3).Myrtle Warbler (4572) was once again the most commonly banded species in Region IV, followed by White-throated Sparrow (1723), Gray Catbird (1349), and Western Palm Warbler (1090). Michelle Davis' station on Key Biscayne is the envy of the rest of us. Her top eight species were all warblers and there was not a Myrtle among them. Imagine having Parula, Prairie, and Worm-eating warblers fighting for sixth place!Not showing among the top ten, however, are other surprises. Several banders commented on Sawwhet Owls and Bicknell's Thrushes. Deanna Dawson banded a Cerulean Warbler at Patuxent. Danny Bystrak caught 138 Swamp Sparrows at Jug Bay. In addition

  2. Goodpasture's autoimmune disease - A collagen IV disorder.

    Science.gov (United States)

    Pedchenko, Vadim; Richard Kitching, A; Hudson, Billy G

    2018-05-12

    Goodpasture's (GP) disease is an autoimmune disorder characterized by the deposition of pathogenic autoantibodies in basement membranes of kidney and lung eliciting rapidly progressive glomerulonephritis and pulmonary hemorrhage. The principal autoantigen is the α345 network of collagen IV, which expression is restricted to target tissues. Recent discoveries include a key role of chloride and bromide for network assembly, a novel posttranslational modification of the antigen, a sulfilimine bond that crosslinks the antigen, and the mechanistic role of HLA in genetic susceptibility and resistance to GP disease. These advances provide further insights into molecular mechanisms of initiation and progression of GP disease and serve as a basis for developing of novel diagnostic tools and therapies for treatment of Goodpasture's disease. Copyright © 2017. Published by Elsevier B.V.

  3. US Nuclear Regulatory Commission region IV

    International Nuclear Information System (INIS)

    Vanderburch, C.

    1996-01-01

    The NRC has established a policy to provide for the timely through and systematic inspection of significant operational events at nuclear power plants. This includes the use of an Augmented Inspection Team to determine the causes, conditions, and circumstances relevant to an event and to communicate its findings and conclusions to NRC management. In accordance with NRC Inspection Manual Chapter 0325. The Region IV Regional Administrator dispatched an Augmented Inspection Team to the Wolf Creek Nuclear Generating Station to review the circumstances surrounding a manual reactor trip on January 30, 1996, with the failure of five control rods to fully insert into the core, a failure of the turbine-driven auxiliary feedwater pump, and the subsequent loss of one train of the essential service water system

  4. Review of the BCI Competition IV

    Science.gov (United States)

    Tangermann, Michael; Müller, Klaus-Robert; Aertsen, Ad; Birbaumer, Niels; Braun, Christoph; Brunner, Clemens; Leeb, Robert; Mehring, Carsten; Miller, Kai J.; Müller-Putz, Gernot R.; Nolte, Guido; Pfurtscheller, Gert; Preissl, Hubert; Schalk, Gerwin; Schlögl, Alois; Vidaurre, Carmen; Waldert, Stephan; Blankertz, Benjamin

    2012-01-01

    The BCI competition IV stands in the tradition of prior BCI competitions that aim to provide high quality neuroscientific data for open access to the scientific community. As experienced already in prior competitions not only scientists from the narrow field of BCI compete, but scholars with a broad variety of backgrounds and nationalities. They include high specialists as well as students. The goals of all BCI competitions have always been to challenge with respect to novel paradigms and complex data. We report on the following challenges: (1) asynchronous data, (2) synthetic, (3) multi-class continuous data, (4) session-to-session transfer, (5) directionally modulated MEG, (6) finger movements recorded by ECoG. As after past competitions, our hope is that winning entries may enhance the analysis methods of future BCIs. PMID:22811657

  5. Titanium(IV), zirconium, hafnium and thorium

    International Nuclear Information System (INIS)

    Brown, Paul L.; Ekberg, Christian

    2016-01-01

    Titanium can exist in solution in a number of oxidation states. The titanium(IV) exists in acidic solutions as the oxo-cation, TiO 2+ , rather than Ti 4+ . Zirconium is used in the ceramics industry and in nuclear industry as a cladding material in reactors where its reactivity towards hydrolysis reactions and precipitation of oxides may result in degradation of the cladding. In nature, hafnium is found together with zirconium and as a consequence of the contraction in ionic radii that occurs due to the 4f -electron shell, the ionic radius of hafnium is almost identical to that of zirconium. All isotopes of thorium are radioactive and, as a consequence of it being fertile, thorium is important in the nuclear fuel cycle. The polymeric hydrolysis species that have been reported for thorium are somewhat different to those identified for zirconium and hafnium, although thorium does form the Th 4 (OH) 8 8+ species.

  6. Ultrathin magnetic structures IV applications of nanomagnetism

    CERN Document Server

    Heinrich, Bretislav

    2004-01-01

    The ability to understand and control the unique properties of interfaces has created an entirely new field of magnetism which already has a profound impact in technology and is providing the basis for a revolution in electronics. The last decade has seen dramatic progress in the development of magnetic devices for information technology but also in the basic understanding of the physics of magnetic nanostructures. Volume III describes thin film magnetic properties and methods for characterising thin film structure topics that underpin the present 'spintronics' revolution in which devices are based on combined magnetic materials and semiconductors. The present volume (IV) deals with the fundamentals of spintronics: magnetoelectronic materials, spin injection and detection, micromagnetics and the development of magnetic random access memory based on GMR and tunnel junction devices. Together these books provide readers with a comprehensive account of an exciting and rapidly developing field. The treatment is de...

  7. KENO-IV code benchmark calculation, (6)

    International Nuclear Information System (INIS)

    Nomura, Yasushi; Naito, Yoshitaka; Yamakawa, Yasuhiro.

    1980-11-01

    A series of benchmark tests has been undertaken in JAERI in order to examine the capability of JAERI's criticality safety evaluation system consisting of the Monte Carlo calculation code KENO-IV and the newly developed multigroup constants library MGCL. The present report describes the results of a benchmark test using criticality experiments about Plutonium fuel in various shape. In all, 33 cases of experiments have been calculated for Pu(NO 3 ) 4 aqueous solution, Pu metal or PuO 2 -polystyrene compact in various shape (sphere, cylinder, rectangular parallelepiped). The effective multiplication factors calculated for the 33 cases distribute widely between 0.955 and 1.045 due to wide range of system variables. (author)

  8. Cranial nerves III, IV and VI

    International Nuclear Information System (INIS)

    Laine, I.J.; Smoker, W.R.; Kuta, A.J.; Felton, W.L.

    1991-01-01

    Because of advances in CT and MR imaging, accurate identification and evaluation of cranial nerve lesions is now possible. Cranial nerves III, IV, and VI, providing motor and sensory control of the eye, can be evaluated as a unit. In this paper, the authors present an overview of the anatomy and pathology of these cranial nerves. We first illustrate their normal anatomic pathways from the brain stem to the orbit. This is followed by clinical examples of patients with a variety of isolated and complex palsies of these three cranial nerves. This is accomplished by inclusion of ocular photographs, correlative imaging studies, and the use of diagrams. Knowledge of the gross and imaging anatomy and the ophthalmologic manifestations of pathology affecting these three cranial nerves permits a tailored approach to their evaluation

  9. (N-Benzyl-N-isopropyldithiocarbamatochloridodiphenyltin(IV

    Directory of Open Access Journals (Sweden)

    Amirah Faizah Abdul Muthalib

    2010-09-01

    Full Text Available The SnIV atom in the title organotin dithiocarbamate, [Sn(C6H52(C11H14NS2Cl], is penta-coordinated by an asymmetrically coordinating dithiocarbamate ligand, a Cl and two ispo-C atoms of the Sn-bound phenyl groups. The resulting C2ClS2 donor set defines a coordination geometry intermediate between square-pyramidal and trigonal-bipyramidal with a slight tendency towards the latter. The formation of close intramolecular C–H...Cl and C–H...S contacts precludes the Cl and S atoms from forming significant intermolecular contacts. The presence of C–H...π contacts leads to the formation of supramolecular arrays that stack along the b axis.

  10. IV Characterisation for the VELO Upgrade

    CERN Multimedia

    Franco Lima, Vinicius

    2018-01-01

    LHCb is a dedicated heavy flavour physics experiment that operates at the LHC. The LHCb collaboration plans to change key features of the present detectors for Run III, moving to a full detector readout at 40MHz and operating at a luminosity of 1-2x1033cm-2s-1. The new Vertex Locator (VELO) detector will use hybrid pixel detectors composed of silicon sensors bump-bonded to new VeloPix CMOS readout chips designed for the new 40MHz readout rate. We will present a novel way of delivering bias through the ASIC backside in order to test IV characteristics of sensors in vacuum before module construction. The appropriate laboratory setups developed to test VELO hybrids for production will also be discussed.

  11. The Elegy in the Aeneid Book IV

    Directory of Open Access Journals (Sweden)

    Paulo Martins

    2017-12-01

    Full Text Available In Aeneid’s book IV, Virgil makes use of elegiac topics while narrating Dido and Aeneas’ ill-fated love, inserting these topics into the epic genre. Some key characteristics of elegiac lover, such as the furor by which he is taken when injured by Cupid’s dart; lover’s idleness; the mala fama that emerges from the love affair; and, lastly, the misera condition in which the lover is thrown to, always followed by a lament; all these has shown to be present in Aeneid’s book IV. So, in addition to evincing how epic genre, without losing its formal rigour, subsume other genres, in this case the elegiac one, this article observes how this procedure takes part in both Vergil’s intra-narrative and extra-narrative purpose when composing Aeneid. In the first case, if we bear in mind that books I to VI are concerned with the construction of Aeneas’ heroic ἦθος, the hero’s denial in staying together with the queen confirms, once again, his destiny, which is Rome’s foundation, that is conventionally of an epic hero – and not of an elegiac lover. As for the second one, it is first important to be aware of Vergil’s aim when composing Aeneid, which is to insert Rome’s history into a myth, which is the elegiac poem itself. Therefore, Dido’s abandonment and her following imprecation in verses 590-640 are used by the poet to justify, even if ironically, Carthaginians’ rivalry and violence against Romans throughout the Punic Wars, putting them as the result of a woman’s love frustration.

  12. Modcomp MAX IV System Processors reference guide

    Energy Technology Data Exchange (ETDEWEB)

    Cummings, J.

    1990-10-01

    A user almost always faces a big problem when having to learn to use a new computer system. The information necessary to use the system is often scattered throughout many different manuals. The user also faces the problem of extracting the information really needed from each manual. Very few computer vendors supply a single Users Guide or even a manual to help the new user locate the necessary manuals. Modcomp is no exception to this, Modcomp MAX IV requires that the user be familiar with the system file usage which adds to the problem. At General Atomics there is an ever increasing need for new users to learn how to use the Modcomp computers. This paper was written to provide a condensed Users Reference Guide'' for Modcomp computer users. This manual should be of value not only to new users but any users that are not Modcomp computer systems experts. This Users Reference Guide'' is intended to provided the basic information for the use of the various Modcomp System Processors necessary to, create, compile, link-edit, and catalog a program. Only the information necessary to provide the user with a basic understanding of the Systems Processors is included. This document provides enough information for the majority of programmers to use the Modcomp computers without having to refer to any other manuals. A lot of emphasis has been placed on the file description and usage for each of the System Processors. This allows the user to understand how Modcomp MAX IV does things rather than just learning the system commands.

  13. New mono-organotin (IV) dithiocarbamate complexes

    International Nuclear Information System (INIS)

    Muthalib, Amirah Faizah Abdul; Baba, Ibrahim

    2014-01-01

    Eighteen new mono-organotin dithiocarbamate compounds derived each nine from methyltin(IV) and phenyltin(IV) reacted using in-situ method with various type of N-dialkylamine together with carbon disulphide with the ratio of 1:3:3. Elemental and gravimetric analysis showed that the general formula of these compounds were RSnCl[S 2 CNR′R″] 2 (R= Ph, CH 3 , R′ = CH 3 , C 2 H 5 , C 7 H 7 and R″ = C 2 H 5 , C 6 H 11 , iC 3 H 7 , C 7 H 7 ). These compounds had been characterized by infrared spectroscopy, ultraviolet spectroscopy, 1 H, 13 C NMR spectroscopy and single crystal X-ray crystallography. The infrared spectra of these compounds showed three important peaks indicating the formation of dithiocarbamate compounds, ν(C N), ν(C S) and ν(Sn-S) band which present in the region of 1444–1519, 954–1098 and 318–349 cm −1 respectively. The ultraviolet-visible spectra showed an absorption band for the π - π* transition of N C S group in the range of 253 – 259 nm due to the intramolecular charge transfer of the ligand. The 13 C NMR spectra showed an important shift for δ(N 13 CS 2 ) in the range of 196.8 – 201.9 ppm.. Single crystal X-ray diffraction studies showed three new structures with the general formula of PhSnCl[S 2 CN(Et)(i−Pr)] 2 , MeSnCl[S 2 CN(Me)(Cy)] 2 and MeSnCl[S 2 CN(i−Pr)(CH 2 Ph)] 2 . All structures having a distorted octahedral geometry set by CClS 4 donor atom from the two chelating dithiocarbamate ligands

  14. The CRAFT Fortran Programming Model

    Directory of Open Access Journals (Sweden)

    Douglas M. Pase

    1994-01-01

    Full Text Available Many programming models for massively parallel machines exist, and each has its advantages and disadvantages. In this article we present a programming model that combines features from other programming models that (1 can be efficiently implemented on present and future Cray Research massively parallel processor (MPP systems and (2 are useful in constructing highly parallel programs. The model supports several styles of programming: message-passing, data parallel, global address (shared data, and work-sharing. These styles may be combined within the same program. The model includes features that allow a user to define a program in terms of the behavior of the system as a whole, where the behavior of individual tasks is implicit from this systemic definition. (In general, features marked as shared are designed to support this perspective. It also supports an opposite perspective, where a program may be defined in terms of the behaviors of individual tasks, and a program is implicitly the sum of the behaviors of all tasks. (Features marked as private are designed to support this perspective. Users can exploit any combination of either set of features without ambiguity and thus are free to define a program from whatever perspective is most appropriate to the problem at hand.

  15. Are stage IV vestibular schwannomas preoperatively different from other stages?

    Science.gov (United States)

    Tringali, Stéphane; Dubreuil, Christian; Zaouche, Sandra; Ferber-Viart, Chantal

    2008-01-01

    The aim of this study was to focus on the clinical and paraclinical symptoms of patients suffering from Stage IV vestibular schwannomas (VSs). In this prospective study, we included 734 patients who have VS and candidates for operation. Patients were classified as having Stage I, II, III, or IV tumors according to Tos criteria as evaluated by magnetic resonance imaging. PREOPERATIVE CLINICAL EVALUATION: We recorded the occurrence of complaints (%) and duration (yr) of hearing loss, tinnitus, and balance disorder. Preoperative paraclinical evaluation included pure-tone (PTA) and speech audiometry, auditory brainstem response (ABR) patterns, and vestibular deficit at videonystamography (VNG). Continuous variables were compared between Stage IV and other stages using analysis of variance. Qualitative variables expressed as a percentage of presence were compared between Stage IV and other stages using percentage comparison. Quantitative Parameters. Patients with Stage IV VS were significantly younger as compared with patients with other stages. Stage IV hearing loss was greater compared with other stages at 250 and 500 Hz but smaller at 2,000 and 8,000 Hz. We found no difference in the loss of PTA between Stage IV and the other stages. Speech discriminancy score was smaller in Stage IV. The durations of hearing loss, tinnitus, and balance disorders were similar whatever the tumor stage. Auditory brainstem response patterns showed no difference in Wave III latency between Stage IV VS and other stages, whereas Wave V latency and V-I interval were higher in Stage IV. Both ABR threshold and VNG caloric deficit were higher in Stage IV VS compared with other stages. Qualitative Parameters. The percentage of patients with Stage IV was lower than that with Stages II and III. The percentage of men and women was similar in all stages. The occurrence of hearing loss was similar in all stages, whereas that of tinnitus was lower in Stage IV compared with Stages I and II. In

  16. A FORTRAN program for the use of digital terrain elevation models of the Instituto Nacional de Estadistica, Geografia e Informatica of Mexico (INEGI); Programa en FORTRAN para el manejo de modelos digitales de elevacion del terreno del Instituto Nacional de Estadistica, Geografia e Informatica de Mexico (INEGI)

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Estrada, Gerardo [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)

    1996-09-01

    A FORTRAN program is presented for the use of digital terrain elevation models with raster format of the Instituto Nacional de Estadistica, Geografia e Informatica of Mexico (INEGI). This program allows the selection of a data window that can be delimited, optionally, giving the extreme coordinates in degrees, minutes and seconds or in UTM (Universal Transversal Mercator) coordinates. Digital terrain data are selected to produce an output file in SURFER binary grid format with decimal degrees coordinates. Optionally an x, y, z output file in ASCII code permits the griding with commercial software to produce a map with planar rectangular coordinates. During the window selection a simple filtering process is performed to diminish numerical errors of the original file, and if it is wanted, an undersampling can be conducted to prepare less detailed maps of great coverage. This program has been extensively tested in the Gerencia de Proyectos Geotermoelectricos de la Comision federal de Electricidad (CFE) in Mexico, where it is used to prepare base maps, automatically traced topographic profiles and boundary condition for thermal modelling. Another direct uses are the calculus of terrain and isostatic corrections for gravity studies, topographic height estimating based on known horizontal coordinates, climatic effects modelling, automatic calculus of material volumes and many more. [Espanol] Se presenta un programa FORTRAN para el uso de modelos digitales de elevacion del terreno con el formato raster del Instituto Nacional de Estadistica, Geografia e Informatica de Mexico (INEGI). El programa permite la seleccion de una ventana de datos, la cual puede elegirse optativamente dando las coordenadas extremas en coordenadas geograficas en grados, minutos y segundos o en coordenadas UTM (proyeccion Universal Transversa de Mercator). Se seleccionan los datos del modelo digital y se produce una rejilla lista para su despliegue en formato binario UTM cuyo enrejillado permite

  17. Collagen type IV at the fetal-maternal interface.

    Science.gov (United States)

    Oefner, C M; Sharkey, A; Gardner, L; Critchley, H; Oyen, M; Moffett, A

    2015-01-01

    Extracellular matrix proteins play a crucial role in influencing the invasion of trophoblast cells. However the role of collagens and collagen type IV (col-IV) in particular at the implantation site is not clear. Immunohistochemistry was used to determine the distribution of collagen types I, III, IV and VI in endometrium and decidua during the menstrual cycle and the first trimester of pregnancy. Expression of col-IV alpha chains during the reproductive cycle was determined by qPCR and protein localisation by immunohistochemistry. The structure of col-IV in placenta was examined using transmission electron microscopy. Finally, the expression of col-IV alpha chain NC1 domains and collagen receptors was localised by immunohistochemistry. Col-IV alpha chains were selectively up-regulated during the menstrual cycle and decidualisation. Primary extravillous trophoblast cells express collagen receptors and secrete col-IV in vitro and in vivo, resulting in the increased levels found in decidua basalis compared to decidua parietalis. A novel expression pattern of col-IV in the mesenchyme of placental villi, as a three-dimensional network, was found. NC1 domains of col-IV alpha chains are known to regulate tumour cell migration and the selective expression of these domains in decidua basalis compared to decidua parietalis was determined. Col-IV is expressed as novel forms in the placenta. These findings suggest that col-IV not only represents a structural protein providing tissue integrity but also influences the invasive behaviour of trophoblast cells at the implantation site. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Thermodynamic properties of actinide complexes. IV. Thorium(IV)- and uranyl(VI)-malonate systems

    Energy Technology Data Exchange (ETDEWEB)

    Di Bernardo, P; Di Napoli, V; Cassol, A; Magon, L [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi

    1977-01-01

    The stability constants and the enthalpies of formation of thorium(IV)- and uranyl(VI)-malonate complexes have been determined by potentiometric and calorimetric titrations in 1.00 M solutions of Na(ClO/sub 4/) at 25/sup 0/C. All complexes formed are found to be stabilized by a large entropy gain. The values for the stability constants agree with an ionic bonding model. The malonate behaves as a bidentate ligand forming only chelate complexes.

  19. Transient Analysis of Generation IV quick reactors; Analisis de Transitorios en Reactores Rapidos de Generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, M.; Martin-Fuertes, F.

    2013-07-01

    As a complement to the attached code 3D neutron-CIEMAT thermohydraulic added a module to simulate transient. Temporary kinetics is resolved by factoring flow in a spatial part and another storm. MCNP provides the reactivity and updated spatial function and COBRA-IV calculates the temperature distribution. Temporary dependence of amplitude is calculated using time delayed neutron Kinetic equations. As an example of application, examines a transient loss of flow in MYRRHA, a lead-cooled experimental reactor.

  20. Complexes of uranium (IV) and thorium (IV) with α-picolinic acid, nicotinic acid, anthranilic acid and N-phenylanthranilic acid

    International Nuclear Information System (INIS)

    Singh, M.; Singh, R.

    1979-01-01

    Stable U(IV) and Th(IV) complexes with the title ligands have been synthesised from U(OAc) 4 , and Th(OAc) 4 . Magnetic susceptibilities, IR and reflectance spectra of U(IV) and IR spectra of Th(IV) complexes have been studied which indicate eight coordination for U(IV) in these chelates. (auth.)

  1. Computations of nuclear response functions with MACK-IV

    International Nuclear Information System (INIS)

    Abdou, M.A.; Gohar, Y.

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program, MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hybrids, and fission applications

  2. 1L Mark-IV Target Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-16

    This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

  3. BALTICA IV. Plant maintenance for managing life and performance

    Energy Technology Data Exchange (ETDEWEB)

    Hietanen, S.; Auerkari, P. [eds.] [VTT Manufacturing Technology, Espoo (Finland). Operational Reliability

    1998-12-31

    BALTICA IV International Conference on Plant Maintenance Managing Life and performance held on September 7-9, 1998 on board M/S Silja Symphony on its cruise between Helsinki-Stockholm and at Aavaranta in Kirkkonummi. The BALTICA IV conference provides a forum for the transfer of technology from applied research to practice. This is one of the two volumes of the proceedings of the BALTICA IV International Conference on Plant Maintenance Managing Life and Performance. The BALTICA IV conference focuses on new technology, recent experience and applications of condition and life management, and on improvements in maintenance strategies for safe and economical operation of power plants. (orig.)

  4. Computations of nuclear response functions with MACK-IV

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M A; Gohar, Y

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program, MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hybrids, and fission applications.

  5. BALTICA IV. Plant maintenance for managing life and performance

    Energy Technology Data Exchange (ETDEWEB)

    Hietanen, S; Auerkari, P [eds.; VTT Manufacturing Technology, Espoo (Finland). Operational Reliability

    1999-12-31

    BALTICA IV International Conference on Plant Maintenance Managing Life and performance held on September 7-9, 1998 on board M/S Silja Symphony on its cruise between Helsinki-Stockholm and at Aavaranta in Kirkkonummi. The BALTICA IV conference provides a forum for the transfer of technology from applied research to practice. This is one of the two volumes of the proceedings of the BALTICA IV International Conference on Plant Maintenance Managing Life and Performance. The BALTICA IV conference focuses on new technology, recent experience and applications of condition and life management, and on improvements in maintenance strategies for safe and economical operation of power plants. (orig.)

  6. New mono-organotin (IV) dithiocarbamate complexes

    Energy Technology Data Exchange (ETDEWEB)

    Muthalib, Amirah Faizah Abdul; Baba, Ibrahim [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi (Malaysia)

    2014-09-03

    Eighteen new mono-organotin dithiocarbamate compounds derived each nine from methyltin(IV) and phenyltin(IV) reacted using in-situ method with various type of N-dialkylamine together with carbon disulphide with the ratio of 1:3:3. Elemental and gravimetric analysis showed that the general formula of these compounds were RSnCl[S{sub 2}CNR′R″]{sub 2} (R= Ph, CH{sub 3}, R′ = CH{sub 3}, C{sub 2}H{sub 5}, C{sub 7}H{sub 7} and R″ = C{sub 2}H{sub 5}, C{sub 6}H{sub 11}, iC{sub 3}H{sub 7}, C{sub 7}H{sub 7}). These compounds had been characterized by infrared spectroscopy, ultraviolet spectroscopy, {sup 1}H, {sup 13}C NMR spectroscopy and single crystal X-ray crystallography. The infrared spectra of these compounds showed three important peaks indicating the formation of dithiocarbamate compounds, ν(CN), ν(CS) and ν(Sn-S) band which present in the region of 1444–1519, 954–1098 and 318–349 cm{sup −1} respectively. The ultraviolet-visible spectra showed an absorption band for the π - π* transition of NCS group in the range of 253 – 259 nm due to the intramolecular charge transfer of the ligand. The {sup 13}C NMR spectra showed an important shift for δ(N{sup 13}CS{sub 2}) in the range of 196.8 – 201.9 ppm.. Single crystal X-ray diffraction studies showed three new structures with the general formula of PhSnCl[S{sub 2}CN(Et)(i−Pr)]{sub 2}, MeSnCl[S{sub 2}CN(Me)(Cy)]{sub 2} and MeSnCl[S{sub 2}CN(i−Pr)(CH{sub 2}Ph)]{sub 2}. All structures having a distorted octahedral geometry set by CClS{sub 4} donor atom from the two

  7. The Role of Dipeptidyl Peptidase IV in Lung Metastasis of Breast Cancer Cells

    Science.gov (United States)

    1999-05-01

    Our studies focused on (1) cloning and sequencing of wild-type endothelial DPP IV (wtDPP IV) and preparation of truncated DPP IV ( tDPP IV); (2...that was identical to hepatic DPP IV. Acid extraction of rat lung yielded a tDPP IV, which was an effective inhibitor of breast cancer cell adhesion to

  8. Generation IV international forum 2002 - remarks

    International Nuclear Information System (INIS)

    Abraham, S.

    2002-01-01

    Analyses and forecasts underscore the important role of nuclear power in energy supply in the 21st century. Important aspects in this respect are the conservation of fossil resources, the protection of the world's climate, and the continuity of supply. Present 1st and 2nd generation nuclear power plants ensure an economical and technically mature electricity supply. Advanced systems offering, e.g., higher efficiency of fuel utilization, simplified systems technology, and advanced safety characteristics, can make available additional benefits in using nuclear power. Upon an initiative of the U.S. Department of Energy (DOE), ten countries combine their efforts in developing such reactor concepts in the Generation IV International Forum (GIF). Argentina, Brazil, Canada, France, Japan, South Africa, South Korea, Switzerland, the United Kingdom, and the United States pursue the common objective in GIF to identify suitable nuclear power systems and promote their development up to the envisaged readiness for construction in 2030. Besides technical and economic questions of nuclear power generation, also other aspects must be considered with a view to the future use of nuclear power. The particularly relevant issues, such as the management of radioactive waste, the intensification of research and development, and international cooperation, have been taken up by the Bush administration at an early point in time and have been, or will be, incorporated in practical solutions, as in the case of the Yucca Mountain repository project. (orig.)

  9. LSPRAY-IV: A Lagrangian Spray Module

    Science.gov (United States)

    Raju, M. S.

    2012-01-01

    LSPRAY-IV is a Lagrangian spray solver developed for application with parallel computing and unstructured grids. It is designed to be massively parallel and could easily be coupled with any existing gas-phase flow and/or Monte Carlo Probability Density Function (PDF) solvers. The solver accommodates the use of an unstructured mesh with mixed elements of either triangular, quadrilateral, and/or tetrahedral type for the gas flow grid representation. It is mainly designed to predict the flow, thermal and transport properties of a rapidly vaporizing spray. Some important research areas covered as a part of the code development are: (1) the extension of combined CFD/scalar-Monte- Carlo-PDF method to spray modeling, (2) the multi-component liquid spray modeling, and (3) the assessment of various atomization models used in spray calculations. The current version contains the extension to the modeling of superheated sprays. The manual provides the user with an understanding of various models involved in the spray formulation, its code structure and solution algorithm, and various other issues related to parallelization and its coupling with other solvers.

  10. 1. IV toimus Kõrvekülas... / Hele Ellermaa

    Index Scriptorium Estoniae

    Ellermaa, Hele

    2005-01-01

    Toimus Hans Christian Anderseni 200. sünniaastapäevale ja rahvusvahelisele lasteraamatupäevale pühendatud IV Tartumaa lasteraamatupäev. Konkursile laekus 172 joonistust, 14 kirjatööd ja 73 paberlõikepilti. Laste tööde näitus on avatud Kõrveküla raamatukogus kuni 16. IV

  11. 78 FR 45592 - DeltaPoint Capital IV, LP;

    Science.gov (United States)

    2013-07-29

    ..., Suite 160, Pittsford, NY 14534. The financing was contemplated for working capital. The financing is... SMALL BUSINESS ADMINISTRATION [License No. 02/02-0662] DeltaPoint Capital IV, LP; Notice Seeking... given that DeltaPoint Capital IV, L.P., 45 East Avenue, 6th Floor, Rochester, NY 14604, Federal...

  12. ADHD Rating Scale-IV: Checklists, Norms, and Clinical Interpretation

    Science.gov (United States)

    Pappas, Danielle

    2006-01-01

    This article reviews the "ADHD Rating Scale-IV: Checklist, norms, and clinical interpretation," is a norm-referenced checklist that measures the symptoms of attention deficit/hyperactivity disorder (ADHD) according to the diagnostic criteria of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric…

  13. Equilibrium between Different Coordination Geometries in Oxidovanadium(IV) Complexes

    Science.gov (United States)

    Ugone, Valeria; Garribba, Eugenio; Micera, Giovanni; Sanna, Daniele

    2015-01-01

    In this laboratory activity, the equilibrium between square pyramidal and octahedral V(IV)O[superscript 2+] complexes is described. We propose a set of experiments to synthesize and characterize two types of V(IV)O[superscript 2+] complexes. The experiment allows great flexibility and may be effectively used at a variety of levels and the activity…

  14. Synthesis and Characterization of Organ Tin (IV) Complexes ...

    African Journals Online (AJOL)

    User

    2012-08-21

    Aug 21, 2012 ... the reference drug. In addition, within the diorganotin(IV) complexes, monomeric type (3) exhibited a slightly better activity as compared to the organodistannoxane dimer types (1 and 4). Key words: Preliminary in vitro cytotoxic assay, organotin(IV) complexes, comparison study. INTRODUCTION. Although ...

  15. Experimental facilities for Generation IV reactors research

    International Nuclear Information System (INIS)

    Krecanova, E.; Di Gabriele, F.; Berka, J.; Zychova, M.; Macak, J.; Vojacek, A.

    2013-06-01

    Centrum Vyzkumu Rez (CVR) is research and development Company situated in Czech Republic and member of the UJV group. One of its major fields is material research for Generation IV reactor concepts, especially supercritical water-cooled reactor (SCWR), very high temperature/gas-cooled fast reactor (VHTR/GFR) and lead-cooled fast reactor (LFR). The CVR is equipped by and is building unique experimental facilities which simulate the environment in the active zones of these reactor concepts and enable to pre-qualify and to select proper constructional materials for the most stressed components of the facility (cladding, vessel, piping). New infrastructure is founded within the Sustainable Energy project focused on implementation the Generation IV and fusion experimental facilities. The research of SCWR concept is divided to research and development of the constructional materials ensured by SuperCritical Water Loop (SCWL) and fuel components research on Fuel Qualification Test loop (SCWL-FQT). SCWL provides environment of the primary circuits of European SCWR, pressure 25 MPa, temperature 600 deg. C and its major purpose is to simulate behavior of the primary medium and candidate constructional materials. On-line monitoring system is included to collect the operational data relevant to experiment and its evaluation (pH, conductivity, chemical species concentration). SCWL-FQT is facility focused on the behavior of cladding material and fuel at the conditions of so-called preheater, the first pass of the medium through the fuel (in case of European SCWR concept). The conditions are 450 deg. C and 25 MPa. SCWL-FQT is unique facility enabling research of the shortened fuel rods. VHTR/GFR research covers material testing and also cleaning methods of the medium in primary circuit. The High Temperature Helium Loop (HTHL) enables exposure of materials and simulates the VHTR/GFR core environment to analyze the behavior of medium, especially in presence of organic compounds and

  16. Thiocyanato species of uranium(IV)

    International Nuclear Information System (INIS)

    Loyson, P.L.R.

    1974-12-01

    The aim of this thesis was to study the system U +4 /ClO 4 - /NCS - /HMPA/ - Solvent. This was done by means of various physical chemical methods. Spectrophotometric and conductometric evidence indicated that the following are the important species, which exist in acetone solution: (U(ClO 4 ) 3 .3acetone) + , (U(NCS) 3 .5acetone) + , (U 2 (NCS) 9 .6acetone) - , (U(NCS) 3 .2HMPA.3acetone) + , (U(NCS) 5 .2HMPA) - , (U(ClO 4 ) 3 .3HMPA) + , (U(NCS).5HMPA) +3 , (U(NCS) 2 .4HMPA) +2 and (U(NCS) 3 .3HMPA) + . The replacement of the large ClO 4 - ion by the much smaller NCS - anion results in a change in coordination of the U +4 , from six to eight. The formation of the species (U(NCS) 5 .2HMPA) - wasalso suggested by infrared studies and solubility determinations. The effect of a polar solvent on U(NCS) 4 .4HMPA was also studied, which indicated that, on solvation in methyl cyanide, U(NCS) 4 .4HMPA loses bound HMPA molecules. The ultimate goal of this project, i.e. the determination of the successive stability constants of the uranium(IV)thiocyanato complexes in acetone, was not reached, however, due to limitations of the computer program used. A qualitative treatment revealed that the stability of (U(NCS) 3 .5acetone) + , in acetone, is of the same order of magnitude as that of Co(NCS) 3 - ; similarly the species (U 2 (NCS) 9 .6acetone) - seems to be as stable as C0(NCS) 4 =. It was also indicated that excess U +4 cannot remove all bound NCS - from Co +2 . Finally the thiocyanato complexes of U +4 , relative to those of CO +2 , seem to be more stable in methyl cyanide, a N-donor solvent, than in acetone, an O-donor solvent

  17. Validation of practical notebook Morphophysiology IV

    Directory of Open Access Journals (Sweden)

    Rafael Capote Martínez

    2012-03-01

    Full Text Available Since the implementation of the Morphophysiology, 2007-2008 academic year, has shown a low achievement and motivation of students in individual and independent study. Most of them do not possess the skills or general intellectual development freelancing enough to assimilate the great independence required by this new learning model. Therefore, it was decided to introduce a new medium of instruction notebook handy morphophysiology IV which is an orientation guide for individual and independent study of students at the same time improves the management process of the educational process, whose usefulness is intended to validate. They surveyed 345 (94.8% who choose different specialties including Physical Culture. It was used in the survey, the questionnaire technique questions and answers, the closed first, and combining the direct and indirect, with some filter. This study was conducted through the comparison test of proportions between independent samples, using the Microstat statistical system, with a significance level of α = 0.05 (P <0.05. The 97.33% and 95.6% of students classified as necessary and useful respectively, the Practical Notebook, based on teaching assignments. The 67.84% of students suggests that the effectiveness of Practical Notebook is achieved when it is developed in a coordinated manner from staff student effort, reflections set out in groups or teams of study and the guiding role and facilitator professor, where it appears that forces develop participatory techniques. It is concluded that the Practical Notebook, acts as a methodological guide guiding, and developed through teaching assignments by students during individual and independent study, represents an effective tool for the learning process, contributing significantly to the improvement morphophysiology the curricular discipline.

  18. Common molecular determinants of tarantula huwentoxin-IV inhibition of Na+ channel voltage sensors in domains II and IV.

    Science.gov (United States)

    Xiao, Yucheng; Jackson, James O; Liang, Songping; Cummins, Theodore R

    2011-08-05

    The voltage sensors of domains II and IV of sodium channels are important determinants of activation and inactivation, respectively. Animal toxins that alter electrophysiological excitability of muscles and neurons often modify sodium channel activation by selectively interacting with domain II and inactivation by selectively interacting with domain IV. This suggests that there may be substantial differences between the toxin-binding sites in these two important domains. Here we explore the ability of the tarantula huwentoxin-IV (HWTX-IV) to inhibit the activity of the domain II and IV voltage sensors. HWTX-IV is specific for domain II, and we identify five residues in the S1-S2 (Glu-753) and S3-S4 (Glu-811, Leu-814, Asp-816, and Glu-818) regions of domain II that are crucial for inhibition of activation by HWTX-IV. These data indicate that a single residue in the S3-S4 linker (Glu-818 in hNav1.7) is crucial for allowing HWTX-IV to interact with the other key residues and trap the voltage sensor in the closed configuration. Mutagenesis analysis indicates that the five corresponding residues in domain IV are all critical for endowing HWTX-IV with the ability to inhibit fast inactivation. Our data suggest that the toxin-binding motif in domain II is conserved in domain IV. Increasing our understanding of the molecular determinants of toxin interactions with voltage-gated sodium channels may permit development of enhanced isoform-specific voltage-gating modifiers.

  19. An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

    International Nuclear Information System (INIS)

    Leahy, Timothy J.

    2010-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated 'toolkit' consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

  20. Testing and economical evaluation of U(IV) in Purex

    International Nuclear Information System (INIS)

    Hoisington, J.E.; Hsu, T.C.

    1983-01-01

    The use of uranous nitrate, U(IV), as a plutonium reductant in the Purex solvent extraction process could significantly reduce the waste generation at the Savannah River Plant. The current reductant is a ferrous sulfamate (FS)/hydroxylamine nitrate (HAN) mixture. The iron and sulfate in the FS are major contributors to waste generation. The U(IV) reductant oxidizes to U(VI) producing no waste. The Savannah River Laboratory has developed an efficient electrochemical cell for U(IV) production and has demonstrated the effectiveness of U(IV) as a plutonium reductant. Plant tests and economic analyses are currently being conducted to determine the cost effectiveness of U(IV) implementation. The results of recent studies are presented

  1. Crystal structure of ammonium divanadium(IV,V tellurium(IV heptaoxide

    Directory of Open Access Journals (Sweden)

    William T. A. Harrison

    2014-07-01

    Full Text Available The polyhedral building blocks of the layered inorganic network in the mixed-valence title compound, (NH4(VIVO2(VVO2(TeO3, are vertex-sharing VVO4 tetrahedra, distorted VIVO6 octahedra and TeO3 pyramids, which are linked by V—O—V and V—O—Te bonds, forming double layers lying parallel to (100. The presumed TeIV lone-pairs of electrons appear to be directed inwards into cavities in the double layers. The charge-balancing ammonium cations lie between the layers and probably interact with them via N—H...O hydrogen bonds.

  2. Plasma metabolism of apolipoprotein A-IV in humans

    International Nuclear Information System (INIS)

    Ghiselli, G.; Krishnan, S.; Beigel, Y.; Gotto, A.M. Jr.

    1986-01-01

    As assessed by molecular sieve chromatography and quantitation by a specific radioimmunoassay, apoA-IV is associated in plasma with the triglyceride-rich lipoproteins, to a high density lipoprotein (HDL) subfraction of smaller size than HDL3, and to the plasma lipoprotein-free fraction (LFF). In this study, the turnover of apoA-IV associated to the triglyceride-rich lipoproteins, HDL and LFF was investigated in vivo in normal volunteers. Human apoA-IV isolated from the thoracic duct lymph chylomicrons was radioiodinated and incubated with plasma withdrawn from normal volunteers after a fatty meal. Radioiodinated apoA-IV-labeled triglyceride-rich lipoproteins, HDL, and LFF were then isolated by chromatography on an AcA 34 column. Shortly after the injection of the radioiodinated apoA-IV-labeled triglyceride-rich lipoproteins, most of the radioactivity could be recovered in the HDL and LFF column fractions. On the other hand, when radioiodinated apoA-IV-labeled HDL or LFF were injected, the radioactivity remained with the originally injected fractions at all times. The residence time in plasma of 125 I-labeled apoA-IV, when injected in association with HDL or LFF, was 1.61 and 0.55 days, respectively. When 125 I-labeled apoA-IV was injected as a free protein, the radioactivity distributed rapidly among the three plasma pools in proportion to their mass. The overall fractional catabolic rate of apoA-IV in plasma was measured in the three normal subjects and averaged 1.56 pools per day. The mean degradation rate of apoA-IV was 8.69 mg/kg X day

  3. IUE observations of interstellar Si IV and C IV lines observed in the spectra of Wolf-Rayet stars

    International Nuclear Information System (INIS)

    Smith, L.J.; Willis, A.J.; Wilson, R.

    1980-01-01

    Recent IUE observations of Wolf-Rayet stars show narrow absorption lines in the highly ionized species of Si IV and C IV. The strengths of these 'interstellar' Si IV and C IV lines observed in the spectra of 10 WR stars and two other early-type stars are compared. Of the WR sample, six stars exhibit very strong Si IV and C IV lines (Wsub(lambda) approximately 0.3 to 0.5 A) whilst the other four stars show much weaker lines (Wsub(lambda) approximately 0.1 A). There is no correlation between the strengths of these lines with either stellar distance or colour excess. The weaker absorptions may arise in the individual stellar H II regions, the observed strengths being consistent with those expected for stars with Tsub(eff) = 30 000 K. Five of the other stars which exhibit very strong absorptions lie in the line of sight to active interstellar regions (Cygnus and Carina nebulae) and it is considered probable that, in addition to their H II region components, the bulk of the strong Si IV and C IV absorptions originate in hot gas associated with these active regions. In the case of the WN5 star HD 50896 violet-displaced components are observed in the interstellar lines of low ionization species. These are thought to be produced in the ring nebula S308 surrounding HD 50896. (author)

  4. Studies on Th(IV) and Zr(IV) complexes of oxygen donor ligands

    International Nuclear Information System (INIS)

    Agarwal, R.K.; Srivastava, M.; Srivastava, A.K.

    1981-01-01

    In recent years a large number of complexes of amine N-oxides with a wide variety of metal salts have been isolated and characterized. Less attention has been paid to the aromatic amine N-oxides complexes with Th(IV) thiocyanate. In the present communication studies are reported on Th(IV) thiocyanate complexes of pyridine N-oxide (PyO), quinoline N-oxide (QO), isoquinoline N-oxide (IsqO), 2-picoline N-oxide (2-picO), 3-picoline N-oxide (3-picO) and 4-picoline N-oxide (4-picO) and comparisons are made with the existing complexes of 2,6-lutidine N-oxide (LNO), 2, 2'bipyridine N-N'-dioxide (BipyO 2 ), mono N-oxides of 2,2'-bipyridine (BipyNO) and 1,10-phenanthroline (PhenNO) and 1, 10-phenanthroline N-N'-dioxide (PhenO 2 ). The analytical data correspond to the composition Th(NCS) 4 .4L. The molar conductance of all the complexes in nitrobenzene in the range 2.5 to 4.5 Ω -1 cm 2 mol -1 indicate them to be non-electrolytes. The results of IR spectroscopy and thermogravimetry are given and discussed. (author)

  5. Synthetic Strategies for the Synthesis of Ternary Uranium(IV) and Thorium(IV) Fluorides.

    Science.gov (United States)

    Klepov, Vladislav V; Felder, Justin B; Zur Loye, Hans-Conrad

    2018-04-10

    A series of new U(IV) and Th(IV) fluorides, Na 7 U 6 F 31 (1), NaUF 5 (2), NaU 2 F 9 (3), KTh 2 F 9 (4), NaTh 2 F 9 (5), (H 3 O)Th 3 F 13 (6), and (H 3 O)U 3 F 13 (7), was obtained using hydrothermal and low-temperature flux methods. Mild hydrothermal reactions with uranyl acetate as a precursor yielded 1, 7, and the monoclinic polymorph of NaU 2 F 9 , whereas direct reactions between UF 4 and NaF led to the formation of 2 and orthorhombic NaU 2 F 9 (3). This highlights an unexpected difference in reaction products when different starting uranium sources are used. All seven compounds were characterized by single-crystal X-ray diffraction, and their structures are compared on the basis of cation topology, revealing a close topological resemblance between fluorides on the basis of the layers observed in NaUF 5 (H 2 O). Phase-pure samples of 1, 2, and both polymorphs of NaU 2 F 9 were obtained, and their spectroscopic and magnetic properties were measured. The UV-vis data are dominated by the presence of U 4+ cations and agree well with the electronic transitions. Effective magnetic moments of the studied compounds were found to range from 3.08 to 3.59 μ B .

  6. Generation IV nuclear reactors: Current status and future prospects

    International Nuclear Information System (INIS)

    Locatelli, Giorgio; Mancini, Mauro; Todeschini, Nicola

    2013-01-01

    Generation IV nuclear power plants (GEN IV NPPs) are supposed to become, in many countries, an important source of base load power in the middle–long term (2030–2050). Nowadays there are many designs of these NPPs but for political, strategic and economic reasons only few of them will be deployed. International literature proposes many papers and reports dealing with GEN IV NPPs, but there is an evident difference in the types and structures of the information and a general unbiased overview is missing. This paper fills the gap, presenting the state-of-the-art for GEN IV NPPs technologies (VHTR, SFR, SCWR, GFR, LFR and MSR) providing a comprehensive literature review of the different designs, discussing the major R and D challenges and comparing them with other advanced technologies available for the middle- and long-term energy market. The result of this research shows that the possible applications for GEN IV technologies are wider than current NPPs. The economics of some GEN IV NPPs is similar to actual NPPs but the “carbon cost” for fossil-fired power plants would increase the relative valuation. However, GEN IV NPPs still require substantial R and D effort, preventing short-term commercial adoption. - Highlights: • Generation IV reactors are the middle–long term technology for nuclear energy. • This paper provides an overview and a taxonomy for the designs under consideration. • R and D efforts are in the material, heat exchangers, power conversion unit and fuel. • The life cycle costs are competitive with other innovative technologies. • The hydrogen economy will foster the development of Generation IV reactors

  7. Dissimilatory Fe(III) and Mn(IV) reduction.

    Science.gov (United States)

    Lovley, D R

    1991-06-01

    The oxidation of organic matter coupled to the reduction of Fe(III) or Mn(IV) is one of the most important biogeochemical reactions in aquatic sediments, soils, and groundwater. This process, which may have been the first globally significant mechanism for the oxidation of organic matter to carbon dioxide, plays an important role in the oxidation of natural and contaminant organic compounds in a variety of environments and contributes to other phenomena of widespread significance such as the release of metals and nutrients into water supplies, the magnetization of sediments, and the corrosion of metal. Until recently, much of the Fe(III) and Mn(IV) reduction in sedimentary environments was considered to be the result of nonenzymatic processes. However, microorganisms which can effectively couple the oxidation of organic compounds to the reduction of Fe(III) or Mn(IV) have recently been discovered. With Fe(III) or Mn(IV) as the sole electron acceptor, these organisms can completely oxidize fatty acids, hydrogen, or a variety of monoaromatic compounds. This metabolism provides energy to support growth. Sugars and amino acids can be completely oxidized by the cooperative activity of fermentative microorganisms and hydrogen- and fatty-acid-oxidizing Fe(III) and Mn(IV) reducers. This provides a microbial mechanism for the oxidation of the complex assemblage of sedimentary organic matter in Fe(III)- or Mn(IV)-reducing environments. The available evidence indicates that this enzymatic reduction of Fe(III) or Mn(IV) accounts for most of the oxidation of organic matter coupled to reduction of Fe(III) and Mn(IV) in sedimentary environments. Little is known about the diversity and ecology of the microorganisms responsible for Fe(III) and Mn(IV) reduction, and only preliminary studies have been conducted on the physiology and biochemistry of this process.

  8. The adsorption of 117Snm(IV)-EDTMP on collagen

    International Nuclear Information System (INIS)

    Yang Yuqing; Luo Shunzhong; Pu Manfei; Bing Wenzeng; He Jiaheng; Wang Guanquan

    2002-01-01

    The adsorption and desorption characteristics of 117 Sn m (IV)-EDTMP on collage are studied, and compared with that on HA. The results show that the effects of pH and temperature on adsorption of 117 Sn m (IV)-EDTMP on collagen are similar to those on HA, and that the adsorption equilibrium and adsorption model of 117 Sn m (IV)-EDTMP on collagen are completely different from those on HA; 117 Sm m -EDTMP absorbed on collagen are extremely stable and almost could not be desorbed with normal saline or EDTMP

  9. Crystal structure of ammonium octacyanomolybdate(IV) and rubidium octacyanomolybdate(IV)

    Energy Technology Data Exchange (ETDEWEB)

    Semenishin, D.I.; Glovyak, T.; Mys' kiv, M.G.

    1985-11-01

    The crystal structure of ammonium octacyanomolybdate(IV) and rubidium octacyanomolybdate(IV) has been determined by the single-crystal method on a Syntex P2/sub 1/ automatic diffractometer: ((NH/sub 4/)/sub 4/ Mo(CN)/sub 4/) 0.5H/sub 2/O (I) (space group Pma2, a = 15.550(3), b = 14.118(3), c = 7.438(1) A, Z = 4, R = 0.062) and Rb/sub 4/(Mo(CN)/sub 8/). 3H/sub 2/O (II) (space group P4/sub 1/2/sub 1/2, a = 9.300(10, c = 21.807(3) A, Z = 4, R = 0.065). The Mo atoms in structure I occupy two special positions (2(b) and 2(c)) and are each surrounded by eight CN ligands. The mean value of the Mo-C distances for Mo(1) is equal to 2.216 A, and the corresponding value for Mo(2) is 2.235 A. The mean Mo-N lengths are practically identical in both molybdenum anions and are equal to 3.353 A. The mean values of the C identical with N bond lengths in the Mo(1) and Mo(2) anions are 1.118 and 1.137 A, respectively. The MoCn angles vary from 175.0 to 178.4/sup 0/. The coordination sphere of the Mo(1) atom corresponds to a dodecahedron with a single twofold symmetry axis, and the coordination polyhedron of the Mo(2) atom in an antiprism of m symmetry. In structure II the Mo-C distances are within the 2.130-2.160-A range, and the Mo-N distances range from 3.290 to 3.307 A. The MoCN angles vary from 176.0 to 179.3/sup 0/, and the coordination polyhedron of (MoC/sub 8/) is a dodecahedron of 2 symmetry. The existence of two types of coordination of Mo in structure I is presently the only example among the structurally studied octahyanomolybdates(IV).

  10. Beach Profile Analysis System (BPAS). Volume IV. BPAS User’s Guide: Analysis Module SURVY2.

    Science.gov (United States)

    1982-06-01

    feet NSL), the shoreline position can be extrapolated using the two sawardmost points. Before computing volume changes, comon bonds are established...computer. Such features include the 10- character, 60-bit word size, the FORTRAN- callable sort routine (interfacing with the NOS or NOS/BE operating

  11. Level III and IV Ecoregions of the Continental United States

    Science.gov (United States)

    Information and downloadable maps and datasets for Level III and IV ecoregions of the continental United States. Ecoregions are areas of general similarity in the type, quality, and quantity of environmental resources.

  12. U(IV) fluorescence spectroscopy. A new speciation tool

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, Susanne; Brendler, Vinzenz [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Surface Processes; Steudtner, Robin [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Inst. of Resource Ecology

    2017-06-01

    We combined absorption and fluorescence spectroscopy to study the speciation of U(IV) in solution in concentrations down to 10{sup -6} M uranium. With our time-resolved laser-induced fluorescence setup we could determine the fluorescence decay time of U(IV) in perchloric as well as in chloric acid with 2.6 ± 0.3 ns at room temperature and 148.4 ± 6.5 ns at liquid nitrogen temperature. For the U(IV) sulfate system, we observed a bathochromic shift and a peak shape modification in the fluorescence spectra with increasing sulfate concentration in solution. Thus, the potential of U(IV) fluorescence for speciation analysis could be proven.

  13. Determination of U(IV) and hydrazine nitrate by volumetry

    International Nuclear Information System (INIS)

    Cao Xi; Wang Nanjie; Zhang Tao; Wang Lin; Guo Yuhua

    2006-01-01

    To be determined U(IV) and hydrazine nitrate in exist together, chromium (VI) and 1,10-phenanthroline is used individually as oxidation titrator and indicator for U(IV), and N-bromineimino and methyl red is used individually as oxidation titrator and indicator for hydrazine nitrate, U(IV) and hydrazine nitrate in the same sample is determined sequentially in the nitric acid by adjusting concentration of nitric acid. Results show that the precision is better than 2.0% when the mass concentration of U(IV) is ranged over 5.5-205 mg/mL; and the precision is better than 2.0% when the concentration of hydrazine nitrate is ranged over 0.05-1.0 mol/L. (authors)

  14. Report for 2012 from the Bordeaux IVS Analysis Center

    Science.gov (United States)

    Charlot, Patrick; Bellanger, Antoine; Bouffet, Romuald; Bourda, Geraldine; Collioud, Arnaud; Baudry, Alain

    2013-01-01

    This report summarizes the activities of the Bordeaux IVS Analysis Center during the year 2012. The work focused on (i) regular analysis of the IVS-R1 and IVS-R4 sessions with the GINS software package; (ii) systematic VLBI imaging of the RDV sessions and calculation of the corresponding source structure index and compactness values; (iii) investigation of the correlation between astrometric position instabilities and source structure variations; and (iv) continuation of our VLBI observational program to identify optically-bright radio sources suitable for the link with the future Gaia frame. Also of importance is the 11th European VLBI Network Symposium, which we organized last October in Bordeaux and which drew much attention from the European and International VLBI communities.

  15. Complexation of Plutonium (IV) With Sulfate At Variable Temperatures

    International Nuclear Information System (INIS)

    Y. Xia; J.I. Friese; D.A. Moore; P.P. Bachelor; L. Rao

    2006-01-01

    The complexation of plutonium(IV) with sulfate at variable temperatures has been investigated by solvent extraction method. A NaBrO 3 solution was used as holding oxidant to maintain the plutonium(IV) oxidation state throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of sulfate were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-HSO 4 - complexes, dominant in the aqueous phase, were calculated from the effect of [HSO 4 - ] on the distribution ratio. The enthalpy and entropy of complexation were calculated from the stability constants at different temperatures using the Van't Hoff equation

  16. Mandelazo I as a reagent for Zr(IV) determination

    International Nuclear Information System (INIS)

    Rakha, T.H.; Filip, P.; Stefan, N.

    1984-01-01

    A spectrometric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8 x 10 -5 M (i.e. 8 μg Zr(IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO 4 2- and C 2 O 4 2- . Also, the solid state Zr(IV)- Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses

  17. [Mucolipidoses type IV in a patient with mapuche ancestry].

    Science.gov (United States)

    Hernández Ch, Marta; Méndez C, José Ignacio; Concha G, María José; Huete L, Isidro; González B, Sergio; Durán S, Gloria P

    2008-07-01

    We report a 7 year-old girl with mapuche ancestors, diagnosed as a cerebral palsy since infancy and on active rehabilitation. She acquired motor and cognitive skills at 3 years of age. At 5 years of age, a slow neurological deterioration started, associated to visual impairment. Optic atrophy was added to the typical neurological exam of ataxic cerebral palsy and the diagnosis was re-considered. Neuroimaging showed a slow and progressive atrophy of intracerebral structures and ultramicroscopy revealed intracytoplasmatic inclusions in conjunctiva and skin, compatible with mucolipidoses type IV (ML-IV). ML-IV must be included in the differential diagnosis of cerebral palsy associated with loss of acquired skills and progressive visual impairment. Electron microscopy of skin or conjunctiva is a useful diagnostic test. Suspicion of ML-IV must not be restricted to Ashkenazi Jewish population.

  18. Nordic Nuclear Materials Forum for Generation IV Reactors

    International Nuclear Information System (INIS)

    Anghel, C.; Penttilae, S.

    2010-03-01

    A network for material issues for Generation IV nuclear power has been initiated within the Nordic countries. The objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) are to put the basis of a sustainable forum for Gen IV issues, especially focussing on fuels, cladding, structural materials and coolant interaction. Other issues include reactor physics, dynamics and diagnostics, core and fuel design. The present report summarizes the work performed during the year 2009. The efforts made include identification of organisations involved in Gen IV issues in the Nordic countries, update of the forum website, http://www.studsvik.se/GenerationIV, and investigation of capabilities for research within the area of Gen IV. Within the NOMAGE4 project a seminar on Generation IV Nuclear Energy Systems has been organized during 15-16th of October 2009. The aim of the seminar was to provide a forum for exchange of information, discussion on future research needs and networking of experts on Generation IV reactor concepts. As an outcome of the NOMAGE4, a few collaboration project proposals have been prepared/planned in 2009. The network was welcomed by the European Commission and was mentioned as an exemplary network with representatives from industries, universities, power companies and research institutes. NOMAGE4 has been invited to participate to the 'European Energy Research Alliance, EERA, workshop for nuclear structural materials' http://www.eera-set.eu/index.php?index=41 as external observers. Future plans include a new Nordic application for continuation of NOMAGE4 network. (author)

  19. Nordic Nuclear Materials Forum for Generation IV Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anghel, C. (Studsvik Nuclear AB, Nykoeping (Sweden)); Penttilae, S. (Technical Research Centre of Finland, VTT (Finland))

    2010-03-15

    A network for material issues for Generation IV nuclear power has been initiated within the Nordic countries. The objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) are to put the basis of a sustainable forum for Gen IV issues, especially focussing on fuels, cladding, structural materials and coolant interaction. Other issues include reactor physics, dynamics and diagnostics, core and fuel design. The present report summarizes the work performed during the year 2009. The efforts made include identification of organisations involved in Gen IV issues in the Nordic countries, update of the forum website, http://www.studsvik.se/GenerationIV, and investigation of capabilities for research within the area of Gen IV. Within the NOMAGE4 project a seminar on Generation IV Nuclear Energy Systems has been organized during 15-16th of October 2009. The aim of the seminar was to provide a forum for exchange of information, discussion on future research needs and networking of experts on Generation IV reactor concepts. As an outcome of the NOMAGE4, a few collaboration project proposals have been prepared/planned in 2009. The network was welcomed by the European Commission and was mentioned as an exemplary network with representatives from industries, universities, power companies and research institutes. NOMAGE4 has been invited to participate to the 'European Energy Research Alliance, EERA, workshop for nuclear structural materials' http://www.eera-set.eu/index.php?index=41 as external observers. Future plans include a new Nordic application for continuation of NOMAGE4 network. (author)

  20. Two-stage precipitation of neptunium (IV) oxalate

    International Nuclear Information System (INIS)

    Luerkens, D.W.

    1983-07-01

    Neptunium (IV) oxalate was precipitated using a two-stage precipitation system. A series of precipitation experiments was used to identify the significant process variables affecting precipitate characteristics. Process variables tested were input concentrations, solubility conditions in the first stage precipitator, precipitation temperatures, and residence time in the first stage precipitator. A procedure has been demonstrated that produces neptunium (IV) oxalate particles that filter well and readily calcine to the oxide

  1. Degradation of type IV collagen by neoplastic human skin fibroblasts

    International Nuclear Information System (INIS)

    Sheela, S.; Barrett, J.C.

    1985-01-01

    An assay for the degradation of type IV (basement membrane) collagen was developed as a biochemical marker for neoplastic cells from chemically transformed human skin fibroblasts. Type IV collagen was isolated from basement membrane of Syrian hamster lung and type I collagen was isolated from rat tails; the collagens were radioactively labelled by reductive alkylation. The abilities of normal (KD) and chemically transformed (Hut-11A) human skin fibroblasts to degrade the collagens were studied. A cell-associated assay was performed by growing either normal or transformed cells in the presence of radioactively labelled type IV collagen and measuring the released soluble peptides in the medium. This assay also demonstrated that KD cells failed to synthesize an activity capable of degrading type IV collagen whereas Hut-11A cells degraded type IV collagen in a linear manner for up to 4 h. Human serum at very low concentrations, EDTA and L-cysteine inhibited the enzyme activity, whereas protease inhibitors like phenylmethyl sulfonyl fluoride, N-ethyl maleimide or soybean trypsin inhibitor did not inhibit the enzyme from Hut-11A cells. These results suggest that the ability to degrade specifically type IV collagen may be an important marker for neoplastic human fibroblasts and supports a role for this collagenase in tumor cell invasion

  2. Dipeptidyl peptidase IV in two human glioma cell lines

    Directory of Open Access Journals (Sweden)

    A Sedo

    2009-12-01

    Full Text Available There is growing evidence that dipeptidyl peptidase IV [DPP-IV, EC 3.4.14.5] takes part in the metabolism of biologically active peptides participating in the regulation of growth and transformation of glial cells. However, the knowledge on the DPP-IV expression in human glial and glioma cells is still very limited. In this study, using histochemical and biochemical techniques, the DPP-IV activity was demonstrated in two commercially available human glioma cell lines of different transformation degree, as represented by U373 astrocytoma (Grade III and U87 glioblastoma multiforme (Grade IV lines. Higher total activity of the enzyme, as well as its preferential localisation in the plasma membrane, was observed in U87 cells. Compared to U373 population, U87 cells were morphologically more pleiomorphic, they were cycling at lower rate and expressing less Glial Fibrillary Acidic Protein. The data revealed positive correlation between the degree of transformation of cells and activity of DPP-IV. Great difference in expression of this enzyme, together with the phenotypic differences of cells, makes these lines a suitable standard model for further 57 studies of function of this enzyme in human glioma cells.

  3. DSM-IV: a nosology sold before its time?

    Science.gov (United States)

    Zimmerman, M; Jampala, V C; Sierles, F S; Taylor, M A

    1991-04-01

    The purpose of this study was to determine whether American psychiatrists believe that DSM-IV is being published too soon after DSM-III-R. The authors conducted a mail survey of the attitudes of practicing psychiatrists (N = 454), residency program directors (N = 128), residents (N = 1,331), and researchers (N = 196) toward the scheduled publication of DSM-IV in the early 1990s. They found that the majority of all four groups believed that DSM-IV is being published prematurely. In contrast to respondents who believed that the timing of DSM-IV is appropriate, those who indicated that it is being published too soon had more recently completed their residency training and also believed that DSM-III-R was published prematurely. There was no association between the psychiatrists' responses and their theoretical orientation, Board certification status, ownership of the DSM manuals, the length of time they had used DSM-III, and the diagnostic manual (DSM-III or DSM-III-R) they were currently using. The belief that DSM-IV is being published too soon could contribute to underuse of DSM-IV by substantial numbers of psychiatrists. Thus, to foster compliance with it, APA must preserve in its efforts to demonstrate that the advantages of publishing it in 1993 outweigh the disadvantages of adopting yet another manual.

  4. Psychological variables and Wechsler Adult Intelligence Scale-IV performance.

    Science.gov (United States)

    Gass, Carlton S; Gutierrez, Laura

    2017-01-01

    The MMPI-2 and WAIS-IV are commonly used together in neuropsychological evaluations yet little is known about their interrelationships. This study explored the potential influence of psychological factors on WAIS-IV performance in a sample of 180 predominantly male veteran referrals that underwent a comprehensive neuropsychological examination in a VA Medical Center. Exclusionary criteria included failed performance validity testing and self-report distortion on the MMPI-2. A Principal Components Analysis was performed on the 15 MMPI-2 content scales, yielding three broader higher-order psychological dimensions: Internalized Emotional Dysfunction (IED), Externalized Emotional Dysfunction (EED), and Fear. Level of IED was not related to performance on the WAIS-IV Full Scale IQ or its four indexes: (Verbal Comprehension, Perceptual Reasoning, Working Memory, and Processing Speed). EED was not related to WAIS-IV performance. Level of Fear, which encompasses health preoccupations (HEA) and distorted perceptions (BIZ), was significantly related to WAIS-IV Full Scale IQ and Verbal Comprehension. These results challenge the common use of high scores on the MMPI-2 IED measures (chiefly depression and anxiety) to explain deficient WAIS-IV performance. In addition, they provide impetus for further investigation of the relation between verbal intelligence and Fear.

  5. Assembling filamentous phage occlude pIV channels.

    Science.gov (United States)

    Marciano, D K; Russel, M; Simon, S M

    2001-07-31

    Filamentous phage f1 is exported from its Escherichia coli host without killing the bacterial cell. Phage-encoded protein pIV, which is required for phage assembly and secretion, forms large highly conductive channels in the outer membrane of E. coli. It has been proposed that the phage are extruded across the bacterial outer membrane through pIV channels. To test this prediction, we developed an in vivo assay by using a mutant pIV that functions in phage export but whose channel opens in the absence of phage extrusion. In E. coli lacking its native maltooligosacharride transporter LamB, this pIV variant allowed oligosaccharide transport across the outer membrane. This entry of oligosaccharide was decreased by phage production and still further decreased by production of phage that cannot be released from the cell surface. Thus, exiting phage block the pIV-dependent entry of oligosaccharide, suggesting that phage occupy the lumen of pIV channels. This study provides the first evidence, to our knowledge, for viral exit through a large aqueous channel.

  6. A combined XAFS, ESI TOF-MS and LIBD study on the formation of polynuclear Zr(IV), Th(IV) and Pu(IV) species

    Science.gov (United States)

    Rothe, J.; Walther, C.; Brendebach, B.; Büchner, S.; Fuss, M.; Denecke, M. A.; Geckeis, H.

    2009-11-01

    The long term radiotoxicity of spent nuclear fuel disposed of in deep underground repositories after discharge from nuclear power reactors is determined by actinide elements, mainly plutonium. Water intrusion into the repository might cause container corrosion and leaching of the waste matrices, leading to the release of Pu and other actinides into the geological environment. Performance assessment for a future nuclear waste repository requires detailed knowledge on actinide aqueous chemistry in the aquifer surrounding the disposal site. Tetravalent actinides exhibit a strong tendency towards hydrolysis and subsequent polymerization and/or colloid formation. These species provide a potential pathway for migration of actinides away from the repository. Therefore, it is of fundamental interest to study their generation and properties in-situ. To this end, X-ray Absorption Fine Structure Spectroscopy (XAFS) at the INE-Beamline for actinide research at ANKA, Electrospray Mass-Spectrometry (ESI TOF-MS) and Laser Induced Breakdown Detection (LIBD) are combined at FZK-INE in a comprehensive attempt to characterize Zr(IV) (An(IV) analogue), Th(IV) and Pu(IV) polymerization and colloid formation.

  7. Solubility study of Tc(IV) in a granitic water

    International Nuclear Information System (INIS)

    Liu, D.J.; Yao, J.; Wang, B.; Bruggeman, C.; Maes, N.

    2007-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safe disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 .nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 .nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium(IV) was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49 ∝ 1.86) x 10 -9 mol L -1 d -1 under aerobic conditions, while no Tc(IV) oxidation was detected in simulated groundwater and redistilled water under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  8. Investigating the reasons of variability in Si IV and C IV broad absorption line troughs of quasars

    Science.gov (United States)

    Stathopoulos, Dimitrios; Lyratzi, Evangelia; Danezis, Emmanuel; Antoniou, Antonios; Tzimeas, Dimitrios

    2017-09-01

    In this paper we analyze the C IV and Si IV broad absorption troughs of two BALQSOs (J101056.69+355833.3, J114548.38+393746.6) to the individual components they consist of. By analyzing a BAL trough to its components we have the advantage to study the variations of the individual absorbing systems in the line of sight and not just the variations of the whole absorption trough or the variations of selected portions of BAL troughs exhibiting changes. We find that the velocity shifts and FWHMs (Full Width at Half Maximum) of the individual components do not vary between an interval of six years. All variable components show changes in the optical depths at line centers which are manifested as variations in the EW (Equivalent Width) of the components. In both BALQSOs, over corresponding velocities, Si IV has higher incidence of variability than C IV. From our analysis, evidence is in favour of different covering fractions between C IV and Si IV. Finally, although most of our results favour the crossing cloud scenario as the cause of variability, there is also strong piece of evidence indicating changing ionization as the source of variability. Thus, a mixed situation where both physical mechanisms contribute to BAL variability is the most possible scenario.

  9. Panda code

    International Nuclear Information System (INIS)

    Altomare, S.; Minton, G.

    1975-02-01

    PANDA is a new two-group one-dimensional (slab/cylinder) neutron diffusion code designed to replace and extend the FAB series. PANDA allows for the nonlinear effects of xenon, enthalpy and Doppler. Fuel depletion is allowed. PANDA has a completely general search facility which will seek criticality, maximize reactivity, or minimize peaking. Any single parameter may be varied in a search. PANDA is written in FORTRAN IV, and as such is nearly machine independent. However, PANDA has been written with the present limitations of the Westinghouse CDC-6600 system in mind. Most computation loops are very short, and the code is less than half the useful 6600 memory size so that two jobs can reside in the core at once. (auth)

  10. Coincidence: Fortran code for calculation of (e, e'x) differential cross-sections, nuclear structure functions and polarization asymmetry in self-consistent random phase approximation with Skyrme interaction

    Energy Technology Data Exchange (ETDEWEB)

    Cavinato, M.; Marangoni, M.; Saruis, A.M.

    1990-10-01

    This report describes the COINCIDENCE code written for the IBM 3090/300E computer in Fortran 77 language. The output data of this code are the (e, e'x) threefold differential cross-sections, the nuclear structure functions, the polarization asymmetry and the angular correlation coefficients. In the real photon limit, the output data are the angular distributions for plane polarized incident photons. The code reads from tape the transition matrix elements previously calculated, by in continuum self-consistent RPA (random phase approximation) theory with Skyrme interactions. This code has been used to perform a numerical analysis of coincidence (e, e'x) reactions with polarized electrons on the /sup 16/O nucleous.

  11. European project SARGEN IV: safety approach and assessment of GEN IV reactors

    International Nuclear Information System (INIS)

    Ammirabile, L.

    2013-01-01

    • SARGEN I V has elaborated a proposal for the harmonization of safety assessment practices for GEN IV NPP. • An overall reinforcement of DiD is expected for GEN I V NPP, including improved independence between all levels of DiD. • An inherent approach should reinforce the fulfillment of fundamental safety functions e.g. the consequences for some situations should be reduced and the grace periods should be extended. For the same reason, the use of passive systems can be envisaged. • The need of complementary and integrated deterministic and probabilistic approaches is reiterated. • Methodologies: Some of them are not yet applied. • Assessment of hazards would be a challenging aspect of next generation of NPP safety assessment and should be improved, which is confirmed by the first insights of Fukushima Daiichi TEPCO reactors accidents. • Provisions to cope with extreme events notably to improve the grace period before cliff-edge effects and thus allowing back-up measures to be implemented have to be defined and should be considered as hardened equipments

  12. Evaluation of Market Design Programme - Phase IV; Utvaerdering av Market Designprogrammet - etapp IV

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Tomas

    2013-08-15

    The Market Design program was established in year 2000 to study issues related to markets, regulations and policy instruments related to the deregulation of the Swedish electricity market. Through the years, the focus has widened to include not only Sweden but also international cooperation on these issues. The fourth phase of the program is now underway between the years 2010 and 2013. The overall project objective of this fourth phase is to increase knowledge about the Nordic and North European electricity market. Specific objective is to create new knowledge that affects market design of the single market area (Nordic, EU) and to contribute to constructive meetings between researchers, energy companies and government agencies on Market Design Issues. The purpose of the evaluation of the Market Design Program phase IV has been to investigate the results and benefits of the program in relation to the program's original objectives and to examine the need for and areas of further research and possible ways for the research in Market Design. The evaluation has been carried through in four phases during spring and summer 2013. The work has included reading, interviews with program stakeholders, analysis and reporting.

  13. Adaptation of the Wechsler Intelligence Scale for Children-IV (WISC-IV) for Vietnam.

    Science.gov (United States)

    Dang, Hoang-Minh; Weiss, Bahr; Pollack, Amie; Nguyen, Minh Cao

    2012-12-01

    Intelligence testing is used for many purposes including identification of children for proper educational placement (e.g., children with learning disabilities, or intellectually gifted students), and to guide education by identifying cognitive strengths and weaknesses so that teachers can adapt their instructional style to students' specific learning styles. Most of the research involving intelligence tests has been conducted in highly developed Western countries, yet the need for intelligence testing is as or even more important in developing countries. The present study, conducted through the Vietnam National University Clinical Psychology CRISP Center , focused on the cultural adaptation of the WISC-IV intelligence test for Vietnam. We report on (a) the adaptation process including the translation, cultural analysis and modifications involved in adaptation, (b) present results of two pilot studies, and (c) describe collection of the standardization sample and results of analyses with the standardization sample, with the goal of sharing our experience with other researchers who may be involved in or interested in adapting or developing IQ tests for non-Western, non-English speaking cultures.

  14. Overview of Generation IV (Gen IV) Reactor Designs - Safety and Radiological Protection Considerations

    International Nuclear Information System (INIS)

    Baudrand, Olivier; Blanc, Daniel; Ivanov, Evgeny; Bonneville, Herve; Clement, Bernard; Kissane, Martin; Meignen, Renaud; Monhardt, Daniel; Nicaise, Gregory; Bourgois, Thierry; Bruna, Giovanni; Hache, Georges; Repussard, Jacques

    2012-01-01

    The purpose of this document is to provide an updated overview of specific safety and radiological protection issues for all the reactor concepts adopted by the GIF (Generation IV International Forum), independent of their advantages or disadvantages in terms of resource optimization or long-lived-waste reduction. In particular, this new document attempts to bring out the advantages and disadvantages of each concept in terms of safety, taking into account the Western European Nuclear Regulators' Association (WENRA) statement concerning safety objectives for new nuclear power plants. Using an identical framework for each reactor concept (sodium-cooled fast reactors or SFR, high / very-high temperature helium-cooled reactors of V/HTR, gas-cooled fast reactors or GFR, lead-or lead / bismuth-cooled fast reactors or LFR, molten salt reactors or MSR, and supercritical-water-cooled reactors or SCWR), this summary report provides some general conclusions regarding their safety and radiological protection issues, inspired by WENRA's safety objectives and on the basis of available information. Initial lessons drawn from the events at the Fukushima-Daiichi nuclear power plant in March 2011 have also been taken into account in IRSN's analysis of each reactor concept

  15. Transient Analysis Needs for Generation IV Reactor Concepts

    International Nuclear Information System (INIS)

    Siefken, L.J.; Harvego, E.A.; Coryell, E.W.; Davis, C.B.

    2002-01-01

    The importance of nuclear energy as a vital and strategic resource in the U. S. and world's energy supply mix has led to an initiative, termed Generation IV by the U.S. Department of Energy (DOE), to develop and demonstrate new and improved reactor technologies. These new Generation IV reactor concepts are expected to be substantially improved over the current generation of reactors with respect to economics, safety, proliferation resistance and waste characteristics. Although a number of light water reactor concepts have been proposed as Generation IV candidates, the majority of proposed designs have fundamentally different characteristics than the current generation of commercial LWRs operating in the U.S. and other countries. This paper presents the results of a review of these new reactor technologies and defines the transient analyses required to support the evaluation and future development of the Generation IV concepts. The ultimate objective of this work is to identify and develop new capabilities needed by INEEL to support DOE's Generation IV initiative. In particular, the focus of this study is on needed extensions or enhancements to SCDAP/RELAP5/3D code. This code and the RELAP5-3D code from which it evolved are the primary analysis tools used by the INEEL and others for the analysis of design-basis and beyond-design-basis accidents in current generation light water reactors. (authors)

  16. Stark broadening of Ca IV spectral lines of astrophysical interest

    Science.gov (United States)

    Alonso-Medina, A.; Colón, C.

    2014-12-01

    Ca IV emission lines are under the preview of Solar Ultraviolet Measurements of Emitted Radiation device aboard the Solar and Heliospheric Observatory. Also, lines of the Ca IV in planetary nebulae NGC 7027 were detected with the Short Wavelength Spectrometer on board the Infrared Space Observatory. These facts justify an attempt to provide new spectroscopic parameters of Ca IV. There are no theoretical or experimental Stark broadening data for Ca IV. Using the Griem semi-empirical approach and the COWAN code, we report in this paper calculated values of the Stark broadening parameters for 467 lines of Ca IV. They were calculated using a set of wavefunctions obtained by using Hartree-Fock relativistic calculations. These lines arising from 3s23p4ns (n = 4, 5), 3s23p44p, 3s23p4nd (n = 3, 4) configurations. Stark widths and shifts are presented for an electron density of 1017 cm-3 and temperatures T = 10 000, 20 000 and 50 200 K. As these data cannot be compared to others in the literature, we present an analysis of the different regularities of the values presented in this work.

  17. Endonuclease IV of Escherichia coli is induced by paraquat

    International Nuclear Information System (INIS)

    Chan, E.; Weiss, B.

    1987-01-01

    The addition of paraquat (methyl viologen) to a growing culture of Escherichia coli K-12 led within 1 hr to a 10- to 20-fold increase in the level of endonuclease IV, a DNase for apurinic/apyrimidinic sites. The induction was blocked by chloramphenicol. Increases of 3-fold or more were also seen with plumbagin, menadione, and phenazine methosulfate. H 2 O 2 produced no more than a 2-fold increase in endonuclease IV activity. The following agents had no significant effect: streptonigrin, nitrofurantoin, tert-butyl hydroperoxide, γ rays, 260-nm UV radiation, methyl methanesulfonate, mitomycin C, and ascorbate. Paraquat, plumbagin, menadione, and phenazine methosulfate are known to generate superoxide radical anions via redox cycling in vivo. A mutant lacking superoxide dismutase was unusually sensitive to induction by paraquat. In addition, endonuclease IV could be induced by merely growing the mutant in pure O 2 . The levels of endonuclease IV in uninduced or paraquat-treated cells were unaffected by mutations of oxyR, a H 2 O 2 -inducible gene that governs an oxidative-stress regulon. The results indicate that endonuclease IV is an inducible DNA-repair enzyme and that its induction can be mediated via the production of superoxide radicals

  18. Endonuclease IV of Escherichia coli is induced by paraquat

    Energy Technology Data Exchange (ETDEWEB)

    Chan, E.; Weiss, B.

    1987-05-01

    The addition of paraquat (methyl viologen) to a growing culture of Escherichia coli K-12 led within 1 hr to a 10- to 20-fold increase in the level of endonuclease IV, a DNase for apurinic/apyrimidinic sites. The induction was blocked by chloramphenicol. Increases of 3-fold or more were also seen with plumbagin, menadione, and phenazine methosulfate. H/sub 2/O/sub 2/ produced no more than a 2-fold increase in endonuclease IV activity. The following agents had no significant effect: streptonigrin, nitrofurantoin, tert-butyl hydroperoxide, ..gamma.. rays, 260-nm UV radiation, methyl methanesulfonate, mitomycin C, and ascorbate. Paraquat, plumbagin, menadione, and phenazine methosulfate are known to generate superoxide radical anions via redox cycling in vivo. A mutant lacking superoxide dismutase was unusually sensitive to induction by paraquat. In addition, endonuclease IV could be induced by merely growing the mutant in pure O/sub 2/. The levels of endonuclease IV in uninduced or paraquat-treated cells were unaffected by mutations of oxyR, a H/sub 2/O/sub 2/-inducible gene that governs an oxidative-stress regulon. The results indicate that endonuclease IV is an inducible DNA-repair enzyme and that its induction can be mediated via the production of superoxide radicals.

  19. Development of Electromagnetic Analysis Model for IV-CEAPI

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jinseok; Jang, Yongtae; Lee, Myounggoo; Cho, Yeonho; Kim, Hyunmin [KEPCO Engineering and Construction, Inc., Daejeon (Korea, Republic of); Hong, Hoonbin; Baek, Minho [Woojin Inc., Osan (Korea, Republic of)

    2016-05-15

    There are many different types of position indicators such as reed switch type, ultrasonic type, solenoid type, etc. Through an analysis of strengths and weakness of those types, solenoid type was selected for an IV-CEAPI. Although solenoid type CEAPIs have been used world-wide, the IV-CEAPI is to be very different from the conventional designs due to its harsh operating environment. The concept of the IV-CEAPI is simple as shown in Figure 1. The coil is made of mineral insulated wire to be able to operate inside reactor vessel. The CEA is connected to the shaft which is made of ferromagnetic material. As the CEA position varies, the inductance variation is detected by the inductance meter located outside the vessel. Unlike the conventional ones, the IV-CEAPI used only one coil to eliminate coil connection point and electric components inside vessel. A finite element model was developed to calculate inductance of the solenoid type IV-CEAPI. The model considers eddy current effect to calculate frequency dependent inductance value. Analyses were performed to produce an inductance curve to the shaft position.

  20. Development of Electromagnetic Analysis Model for IV-CEAPI

    International Nuclear Information System (INIS)

    Park, Jinseok; Jang, Yongtae; Lee, Myounggoo; Cho, Yeonho; Kim, Hyunmin; Hong, Hoonbin; Baek, Minho

    2016-01-01

    There are many different types of position indicators such as reed switch type, ultrasonic type, solenoid type, etc. Through an analysis of strengths and weakness of those types, solenoid type was selected for an IV-CEAPI. Although solenoid type CEAPIs have been used world-wide, the IV-CEAPI is to be very different from the conventional designs due to its harsh operating environment. The concept of the IV-CEAPI is simple as shown in Figure 1. The coil is made of mineral insulated wire to be able to operate inside reactor vessel. The CEA is connected to the shaft which is made of ferromagnetic material. As the CEA position varies, the inductance variation is detected by the inductance meter located outside the vessel. Unlike the conventional ones, the IV-CEAPI used only one coil to eliminate coil connection point and electric components inside vessel. A finite element model was developed to calculate inductance of the solenoid type IV-CEAPI. The model considers eddy current effect to calculate frequency dependent inductance value. Analyses were performed to produce an inductance curve to the shaft position

  1. The affinity plutonium(IV) for nitrogen donor ligands

    International Nuclear Information System (INIS)

    Jarvis, N.V.; Hancock, R.D.

    1994-01-01

    Established ligand design principles are used to predict the solution chemistry of Pu(IV) with nitrogen donor ligands which do not contain carboxylate donors. pK a 's of the nitrogen donors are lowered by addition of hydroxyalkyl groups causing Pu(IV) to have a greater affinity for these ligands than for hydroxide. Potentiometric studies using the ligands N,N,N'N',N''-pentakis(2-hydroxypropyl)-1,4,7-triazaheptane; N,N,N',N',N''-pentakis(2-hydroxyethyl)-1,4,7-triazaheptane; N,N,N',N',N'-tetrakis(2-hydroxyethyl)-1,2-diaminoethane; N,N,N',N'-tetrakis(2-hydroxyethyl)-trans-1,2-diaminocyclohexane; 1,4,8,11-tetrakis(2-hydroxyethyl)-1,4,8,11-tetraazacyclotetradecane and N,N-bis(2-hydroxyethyl)glycine with Pu(IV) showed that Pu(IV) has a considerable aqueous solution chemistry with these ligands. Data were processed by the ESTA library of programs and stability constants for all the systems are reported. Implications for selective ligand design for Pu(IV) are discussed. (orig.)

  2. A COMPARATIVE CLINICAL STUDY BETWEEN IV ESMOLOL AND IV FENTANYL ON ATTENUATION OF HAEMODYNAMIC RESPONSES TO LARYNGOSCOPY AND INTUBATION

    Directory of Open Access Journals (Sweden)

    Abu Lais Mustaque

    2016-04-01

    Full Text Available INTRODUCTION Laryngoscopy and intubation is an integral part for providing general anaesthesia to patients undergoing various types of surgery. It also plays an important role in critical care units viz. for providing mechanical ventilation. It is a very essential tool in the hands of anaesthesiologist in maintaining airway. The present study is undertaken to determine and compare the efficacy of single bolus dose of IV esmolol 1 mg/kg and IV fentanyl 2 mcg/kg in attenuating the haemodynamic responses to laryngoscopy and tracheal intubation and to ascertain the effectiveness of esmolol hydrochloride and fentanyl citrate in suppressing sympathetic responses. MATERIAL & METHODS The study was conducted under the Department of Anaesthesiology and Critical Care, Assam Medical College and Hospital, Dibrugarh, during the period July 2013 to June 2014. For this purpose, 150 patients of either sex between 20-50 years of ASA I & II physical status were selected after obtaining informed and written consent and were divided into two groups namely, Group E receiving IV esmolol (1 mg/kg and Group F receiving IV fentanyl (2 mcg/kg. RESULTS Inj. fentanyl 2 mcg/kg IV administered 5 minutes before laryngoscopy and intubation was able to prevent adverse haemodynamic changes better than Inj. esmolol 1 mg/kg IV administered 3 minutes prior to laryngoscopy and intubation during elective surgeries under general anaesthesia. CONCLUSION Hence, from the findings of this study we can conclude that IV bolus dose of fentanyl 2 mcg/kg administered 5 minutes before laryngoscopy and intubation can attenuate the sympathetic response to laryngoscopy and intubation without any side effects of the drug in healthy patients undergoing elective surgeries under general anaesthesia.

  3. Automatic generation and analysis of solar cell IV curves

    Science.gov (United States)

    Kraft, Steven M.; Jones, Jason C.

    2014-06-03

    A photovoltaic system includes multiple strings of solar panels and a device presenting a DC load to the strings of solar panels. Output currents of the strings of solar panels may be sensed and provided to a computer that generates current-voltage (IV) curves of the strings of solar panels. Output voltages of the string of solar panels may be sensed at the string or at the device presenting the DC load. The DC load may be varied. Output currents of the strings of solar panels responsive to the variation of the DC load are sensed to generate IV curves of the strings of solar panels. IV curves may be compared and analyzed to evaluate performance of and detect problems with a string of solar panels.

  4. A role for collagen IV in cardiovascular disease?

    DEFF Research Database (Denmark)

    Steffensen, Lasse Bach; Rasmussen, Lars M

    2018-01-01

    Over the past decade, studies have repeatedly found single nucleotide polymorphisms located in the COL4A1 and COL4A2 genes to be associated with cardiovascular disease (CVD), and the 13q34 locus harboring these genes is one of approximately 160 genome-wide significant risk loci for coronary artery...... disease. COL4A1 and COL4A2 encode the ⍺1- and ⍺2-chains of collagen IV, a major component of basement membranes in various tissues including arteries. In spite of the growing body of evidence indicating a role for collagen IV in CVD, remarkably few studies aim at directly investigating such a role....... The purpose of this review is to summarize the clinical reports linking 13q34 to coronary artery disease, atherosclerosis and artery stiffening and to assemble the scattered pieces of evidence from experimental studies based on vascular cells and -tissue collectively supporting a role for collagen IV...

  5. I-V Curves from Photovoltaic Modules Deployed in Tucson

    Science.gov (United States)

    Kopp, Emily; Brooks, Adria; Lonij, Vincent; Cronin, Alex

    2011-10-01

    More than 30 Mega Watts of photo-voltaic (PV) modules are connected to the electric power grid in Tucson, AZ. However, predictions of PV system electrical yields are uncertain, in part because PV modules degrade at various rates (observed typically in the range 0% to 3 %/yr). We present I-V curves (PV output current as a function of PV output voltage) as a means to study PV module efficiency, de-ratings, and degradation. A student-made I-V curve tracer for 100-Watt modules will be described. We present I-V curves for several different PV technologies operated at an outdoor test yard, and we compare new modules to modules that have been operated in the field for 10 years.

  6. Adsorption of Some Hazardous Radionuclides on Cerium(IV) Antimonate

    International Nuclear Information System (INIS)

    Aly, H.F.; Zakaria, E.S.; Shady, S.A.; El-Naggar, I.M.

    1999-01-01

    Cerium(IV) antimonate had been prepared by the dropwise addition of 0.6 M antimony pentachloride and 0.6 M cerium ammonium nitrate solutions by a molar radio of Ce/Sb 0.75. Exchange isotherms for H +/ Co 2+ , H +/ Cs +, H +/ Zn 2+ , H +/ Sr 2+ and H +/ Eu 3+ have been determined at 25, 40 and 60 degree. Besides it was proved that europium is physically adsorbed while zinc, strontium, cobalt and cesium are chemically adsorbed. Moreover, the heat of adsorption of zinc, strontium, cobalt and cesium on cerium(IV) antimonate had been calculated and indicated that cerium(IV) antimonate is of endothermic behaviour towards these ions. Also the distribution coefficients of these ions were determined and it was found that the selectivity in the order: Eu 3+ >Sr 2+ > Cs +> Na +

  7. Chelation and stabilization of berkelium in oxidation state +IV

    Science.gov (United States)

    Deblonde, Gauthier J.-P.; Sturzbecher-Hoehne, Manuel; Rupert, Peter B.; An, Dahlia D.; Illy, Marie-Claire; Ralston, Corie Y.; Brabec, Jiri; de Jong, Wibe A.; Strong, Roland K.; Abergel, Rebecca J.

    2017-09-01

    Berkelium (Bk) has been predicted to be the only transplutonium element able to exhibit both +III and +IV oxidation states in solution, but evidence of a stable oxidized Bk chelate has so far remained elusive. Here we describe the stabilization of the heaviest 4+ ion of the periodic table, under mild aqueous conditions, using a siderophore derivative. The resulting Bk(IV) complex exhibits luminescence via sensitization through an intramolecular antenna effect. This neutral Bk(IV) coordination compound is not sequestered by the protein siderocalin—a mammalian metal transporter—in contrast to the negatively charged species obtained with neighbouring trivalent actinides americium, curium and californium (Cf). The corresponding Cf(III)-ligand-protein ternary adduct was characterized by X-ray diffraction analysis. Combined with theoretical predictions, these data add significant insight to the field of transplutonium chemistry, and may lead to innovative Bk separation and purification processes.

  8. Non-equilibrium ionization by a periodic electron beam. II. Synthetic Si IV and O IV transition region spectra

    Science.gov (United States)

    Dzifčáková, Elena; Dudík, Jaroslav

    2018-03-01

    Context. Transition region (TR) spectra typically show the Si IV 1402.8 Å line to be enhanced by a factor of 5 or more compared to the neighboring O IV 1401.2 Å, contrary to predictions of ionization equilibrium models and the Maxwellian distribution of particle energies. Non-equilibrium effects in TR spectra are therefore expected. Aims: To investigate the combination of non-equilibrium ionization and high-energy particles, we apply the model of the periodic electron beam, represented by a κ-distribution that recurs at periods of several seconds, to plasma at chromospheric temperatures of 104 K. This simple model can approximate a burst of energy release involving accelerated particles. Methods: Instantaneous time-dependent charge states of silicon and oxygen were calculated and used to synthesize the instantaneous and period-averaged spectra of Si IV and O IV. Results: The electron beam drives the plasma out of equilibrium. At electron densities of Ne = 1010 cm-3, the plasma is out of ionization equilibrium at all times in all cases we considered, while for a higher density of Ne = 1011 cm-3, ionization equilibrium can be reached toward the end of each period, depending on the conditions. In turn, the character of the period-averaged synthetic spectra also depends on the properties of the beam. While the case of κ = 2 results in spectra with strong or even dominant O IV, higher values of κ can approximate a range of observed TR spectra. Spectra similar to typically observed spectra, with the Si IV 1402.8 Å line about a factor 5 higher than O IV 1401.2 Å, are obtained for κ = 3. An even higher value of κ = 5 results in spectra that are exclusively dominated by Si IV, with negligible O IV emission. This is a possible interpretation of the TR spectra of UV (Ellerman) bursts, although an interpretation that requires a density that is 1-3 orders of magnitude lower than for equilibrium estimates. Movies associated to Fig. A.1 are available at http://https://www.aanda.org

  9. Tethys and Annex IV Progress Report for FY 2012

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, Luke A.; Butner, R. Scott; Whiting, Jonathan M.; Copping, Andrea E.

    2013-09-01

    The marine and hydrokinetic (MHK) environmental Impacts Knowledge Management System, dubbed “Tethys” after the mythical Greek titaness of the seas, is being developed by the Pacific Northwest National Laboratory (PNNL) to support the U.S. Department of Energy’s Wind and Water Power Program (WWPP). Functioning as a smart database, Tethys enables its users to identify key words or terms to help gather, organize and make available information and data pertaining to the environmental effects of MHK and offshore wind (OSW) energy development. By providing and categorizing relevant publications within a simple and searchable database, Tethys acts as a dissemination channel for information and data which can be utilized by regulators, project developers and researchers to minimize the environmental risks associated with offshore renewable energy developments and attempt to streamline the permitting process. Tethys also houses a separate content-related Annex IV data base with identical functionality to the Tethys knowledge base. Annex IV is a collaborative project among member nations of the International Energy Agency (IEA) Ocean Energy Systems – Implementing Agreement (OES-IA) that examines the environmental effects of ocean energy devices and projects. The U.S. Department of Energy leads the Annex IV working with federal partners such as the Federal Energy Regulatory Commission (FERC), the Bureau of Ocean Energy Management (BOEM), and the National Oceanic Atmospheric Administration (NOAA). While the Annex IV database contains technical reports and journal articles, it is primarily focused on the collection of project site and research study metadata forms (completed by MHK researchers and developers around the world, and collected by PNNL) which provide information on environmental studies and the current progress of the various international MHK developments in the Annex IV member nations. The purpose of this report is to provide a summary of the content

  10. Hereditary sensory and autonomic neuropathy type IV and orthopaedic complications.

    Science.gov (United States)

    Kim, W; Guinot, A; Marleix, S; Chapuis, M; Fraisse, B; Violas, P

    2013-11-01

    Hereditary sensory and autonomic neuropathy type IV (HSAN-IV) is a very rare autosomal recessive disorder characterized by recurrent episodes of unexplained fever, extensive anhidrosis, total insensitivity to pain, hypotonia, and mental retardation. The most frequent complications of this disease are corneal scarring, multiple fractures, joint deformities, osteomyelitis, and disabling self-mutilations. We reported the case of a 12-year-old boy. The goal was to discuss our decision-making and compare this case with cases described in the literature. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  11. Improvement of Steam Generator Reliability for GEN-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-15

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator.

  12. Improvement of Steam Generator Reliability for GEN-IV SFR

    International Nuclear Information System (INIS)

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-01

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator

  13. Synthesis and reactivity of triscyclopentadienyl uranium (III) and (IV) complexes

    International Nuclear Information System (INIS)

    Berthet, J.C.

    1992-01-01

    The reactions of (RC 5 H 4 ) 3 U with R=trimethylsilylcyclopentadienyl or tertiobutylcyclopentadienyl are studied for the synthesis of new uranium organometallic compounds. Reactions with sodium hydride are first described uranium (III) anionic hydrides obtained are oxidized for synthesis of stable uranium (IV) organometallic hydrides. Stability of these compounds is discussed. Reactivity of these uranium (III) and (IV) hydrides are studied. Formation of new binuclear compounds with strong U-O and U-N bonds is examined and crystal structure are presented. Monocyclooctatetraenylic uranium complexes are also investigated

  14. Solutions of group IV elements in liquid lithium

    International Nuclear Information System (INIS)

    Dadd, A.T.; Hubberstey, P.; Roberts, P.G.

    1982-01-01

    The solubilities of tin (0.00 = 22 Sn 5 . A simple thermochemical cycle is used to demonstrate that, whereas carbon dissolves endothermically in both liquid lithium and liquid sodium, the heavier Group IV elements dissolve exothermically. A similar cycle is used to derive solvation enthalpies (for the neutral gaseous species) for all Group IV elements in the two solvents. The trend in solvation enthalpy: C > Si > Ge > Sn > Pb is indicative of a diminishing affinity of solvent for solute and is attributed to the increasing metallic character of the solute as the Group is descended. (author)

  15. Why IV Setup for Stream Ciphers is Difficult

    DEFF Research Database (Denmark)

    Zenner, Erik

    2007-01-01

    In recent years, the initialization vector (IV) setup has proven to be the most vulnerable point when designing secure stream ciphers. In this paper, we take a look at possible reasons why this is the case, identifying numerous open research problems in cryptography.......In recent years, the initialization vector (IV) setup has proven to be the most vulnerable point when designing secure stream ciphers. In this paper, we take a look at possible reasons why this is the case, identifying numerous open research problems in cryptography....

  16. Determination of free acid in plutonium (IV) solutions - thermometrically, potentiometrically

    International Nuclear Information System (INIS)

    Williams, T.L.; Tucker, G.M.; Huff, G.A.; Jordan, L.G.

    1981-09-01

    The thermometric titration technique was found to offer certain advantages over potentiometry in the determination of free acid in Pu(IV) solutions. The thermometric technique was applied to the determination of free acid in plutonium nitrate solutions using potassium fluoride to suppress the hydrolytic interference of plutonium(IV). The results indicate that 0.2 to 2.0 milliequivalents of free acid can be determined with acceptable bias and precision in solutions containing up to 30 milligrams of plutonium. In contrast, neither the thermometric nor the potentiometric technique was suitable for samples containing more than eight milligrams of plutonium complexed with potassium oxalate

  17. Vanadium(IV)-stimulated hydrolysis of 2,3-diphosphoglycerate.

    Science.gov (United States)

    Stankiewicz, P J

    1989-05-01

    Vanadium(IV) stimulates the hydrolysis of 2,3-diphosphoglycerate at 23 degrees C. The pH optimum is 5.0. Reactions were analyzed by enzymatic and phosphate release assays. The products of 2,3-diphosphoglycerate hydrolysis are inorganic phosphate and 3-phosphoglycerate. The reaction is inhibited by high concentrations of 2,3-diphosphoglycerate and an equation has been formulated that describes the kinetic constants for this reaction at pH 7. The possible relevance of the reaction to the therapeutic lowering by vanadium(IV) of red cell 2,3-diphosphoglycerate in sickle-cell disease is discussed.

  18. Sequence Domain Harmonic Modeling of Type-IV Wind Turbines

    DEFF Research Database (Denmark)

    Guest, Emerson; Jensen, Kim Høj; Rasmussen, Tonny Wederberg

    2017-01-01

    -sampled pulsewidth modulation and an analysis of converter generated voltage harmonics due to compensated dead-time. The decoupling capabilities of the proposed the SD harmonic model are verified through a power quality (PQ) assessment of a 3MW Type-IV wind turbine. The assessment shows that the magnitude and phase...... of low-order odd converter generated voltage harmonics are dependent on the converter operating point and the phase of the fundamental component of converter current respectively. The SD harmonic model can be used to make PQ assessments of Type-IV wind turbines or incorporated into harmonic load flows...... for computation of PQ in wind power plants....

  19. 17 CFR Table IV to Subpart E of... - Civil Monetary Penalty Inflation Adjustments

    Science.gov (United States)

    2010-04-01

    ... Inflation Adjustments IV Table IV to Subpart E of Part 201 Commodity and Securities Exchanges SECURITIES AND... Table IV to Subpart E of Part 201—Civil Monetary Penalty Inflation Adjustments Table IV to Subpart E U.S. Code citation Civil monetary penalty inflation adjustments Civil monetary penalty description Year...

  20. Kinetics study on the reduction of trace plutonium (IV) by hydroxylamine in nitric acid media

    International Nuclear Information System (INIS)

    Fei Hongcheng; Luo Longjun

    1998-01-01

    Reaction kinetics of trace Pu(IV) (c(Pu(IV)≤10 -5 mol/L) with hydroxylamine in nitric acid solution is investigated. The effects of concentrations of Pu(IV), Pu(III), NO 3 - , H + and hydroxylamine on the reduction rate of trace Pu(IV) are examined. The rate law of reaction of trace Pu(IV) with hydroxylamine is obtained. The reduction rate of Pu(IV) increases obviously with increasing temperature and the apparent activation energy with k' 0 is equal to 147 kJ/mol. The reaction mechanism of trace Pu(IV) with hydroxylamine is discussed

  1. Synthesis and spectral properties of axially substituted zirconium(IV) and hafnium(IV) water soluble phthalocyanines in solutions

    International Nuclear Information System (INIS)

    Gerasymchuk, Y.S.; Volkov, S.V.; Chernii, V.Ya.; Tomachynski, L.A.; Radzki, St.

    2004-01-01

    Methods of synthesis of novel water soluble axially substituted Zr(IV) and Hf(IV) phthalocyanines with gallic, 5-sulfosalicyllic, oxalic acids, and methyl ester of gallic acid as axial ligands coordinated to the central atom metal of phthalocyanine are presented. The absorption spectra of complex solutions in various solvents were characterized. The dependence of the spectral red shift from Reichardt's empirical polarity parameter is described. The deviation from the linearity of Beer-Bouguer-Lambert law was investigated for the range of concentration 5x10 -6 to 10x10 -5 M. Fluorescent properties of axially substituted phthalocyaninato metal complexes in DMSO solutions were investigated

  2. Apparent formation constants of Pu(IV) and Th(IV) with humic acids determined by solvent extraction method

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, T.; Aoyama, S.; Yoshida, H.; Kobayashi, T.; Takagi, I. [Tokyo Univ. (Japan). Dept. of Nuclear Engineering; Kulyako, Y.; Samsonov, M.; Miyasoedov, B. [Russian Academy of Sciences, Moscow (Russian Federation). V. I. Vernadsky Institute of Geochemistry and Analytical Chemistry (GEOKHI); Moriyama, H. [Kyoto Univ. (Japan). Research Reactor Inst.

    2012-07-01

    Apparent formation constants of Pu(IV) and Th(IV) with two kinds of humic acids were determined in 0.1 M NaClO{sub 4} at 25 C using a solvent extraction method with thenoyltrifluoroacetone in xylene. The acid dissociation constants of humic acids were also measured by potentiometric titration and used as the degree of dissociation for calculating the formation constants. The effect of solution conditions, such as the pH, the initial metal and humic acid concentrations, and the ionic strength, on the formation constants was examined. The obtained data were compared with the ones in the literature. (orig.)

  3. Måleegenskaper ved den norske versjonen av ADHD Rating Scale IV, Skoleversjon (ADHD-RS-IV Skole)

    OpenAIRE

    Kornør, Hege; Bøe, Tormod

    2011-01-01

    - Beskrivelse. ADHD-RS-IV Skole er et spørreskjema som skal fylles ut av lærere eller førskolelærere for å fange opp ADHD-symptomer hos barn og ungdom. Spørreskjemaet har 18 ledd med fire svaralternativer. Det tar under 20 minutter å fylle ut. Hovedskalaen og de to delskalaene skåres ved å summere enkeltskårer. Kompetansekrav for bruk av ADHD-RS-IV inkluderer generell opplæring i testbruk, samt yrkesstatus som psykolog, lege, annet helsepersonell med utdanning på mastergradsnivå, spesialpe...

  4. Måleegenskaper ved den norske versjonen av ADHD Rating Scale – IV Hjemmeversjon (ADHD-RS-IV Hjemme)

    OpenAIRE

    Kornør, Hege; Bøe, Tormod

    2011-01-01

    - Beskrivelse. ADHD-RS-IV Hjemme er et spørreskjema som skal fylles ut av mor, far, verge eller besteforeldre for å fange opp ADHD-symptomer hos barn og ungdom. Spørreskjemaet har 18 ledd med fire svaralternativer. Det tar under 20 minutter å fylle ut. Hovedskalaen og de to delskalaene skåres ved å summere enkeltskårer. Kompetansekrav for bruk av ADHD-RS-IV inkluderer generell opplæring i testbruk, samt yrkesstatus som psykolog, lege, annet helsepersonell med utdanning på ...

  5. Electrochemistry and Spectroelectrochemistry of the Pu (III/IV) and (IV/VI) Couples in Nitric Acid Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lines, Amanda M. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352; Adami, Susan R. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352; Casella, Amanda J. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352; Sinkov, Sergey I. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352; Lumetta, Gregg J. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352; Bryan, Samuel A. [Nuclear Chemistry and Engineering, Pacific Northwest National Laboratory, Richland WA 99352

    2017-09-20

    The solution chemistry of Pu in nitric acid is explored via electrochemistry and spectroelectrochemistry. By utilizing and comparing these techniques, an improved understanding of Pu behavior and its dependence on nitric acid concentration can be achieved. Here the Pu (III/IV) couple is characterized using cyclic voltammetry, square wave voltammetry, and a spectroelectrochemical Nernst step. Results indicate the formal reduction potential of the couple shifts negative with increasing acid concentration and reversible electrochemistry is no longer attainable above 6 M HNO3. Spectroelectrochemistry is also used to explore the irreversible oxidation of Pu(IV) to Pu(VI) and shine light on the mechanism and acid dependence of the redox reaction.

  6. View from... Group IV Photonics: Industry meets academia

    Science.gov (United States)

    Pile, David

    2012-12-01

    Silicon photonics and devices based on group IV elements are overcoming the tough economic downturns that have rocked industry over the past 12 years. Cross fertilization between academia and industry may lead to new devices that are both innovative and profitable.

  7. Gérard Genette : a escrita de Figures IV

    OpenAIRE

    Eiras, Pedro

    2012-01-01

    This article reflects on Genette's most recent work and his theorisation on his own work (its unity and heterogeneity) and the recent multiplication of the areas of study (from music to painting, from Stendhal to Proust). Note is also made of Genette's idiosyncrasy in Figures IV.

  8. Formation, characterization, and stability of plutonium (IV) colloid

    International Nuclear Information System (INIS)

    Hobart, D.E.; Morris, D.E.; Palmer, P.D.; Newton, T.W.

    1989-01-01

    Plutonium is expected to be a major component of the waste element package in any high-level nuclear waste repository. Plutonium(IV) is known to form colloids under chemical conditions similar to those found in typical groundwaters. In the event of a breach of a repository, these colloids represent a source of radionuclide transport to the far-field environment, in parallel with the transport of dissolved waste element species. In addition, the colloids may decompose or disaggregate into soluble ionic species. Thus, colloids represent an additional term in determining waste element solubility limits. A thorough characterization of the physical and chemical properties of these colloids under relevant conditions is essential to assess the concentration limits and transport mechanisms for the waste elements at the proposed Yucca Mountain Repository site. This report is concerned primarily with recent results obtained by the Yucca Mountain Project (YMP) Solubility Determination Task pertaining to the characterization of the structural and chemical properties of Pu(IV) colloid. Important results will be presented which provides further evidence that colloidal plutonium(IV) is structurally similar to plutonium dioxide and that colloidal plutonium(IV) is electrochemically reactive. 13 refs., 7 figs

  9. Parameter extraction from I-V characteristics of PV devices

    Energy Technology Data Exchange (ETDEWEB)

    Macabebe, Erees Queen B. [Department of Electronics, Computer and Communications Engineering, Ateneo de Manila University, Loyola Heights, Quezon City 1108 (Philippines); Department of Physics and Centre for Energy Research, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Sheppard, Charles J. [Department of Physics, University of Johannesburg, PO Box 524, Auckland Park 2006 (South Africa); Dyk, E. Ernest van [Department of Physics and Centre for Energy Research, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa)

    2011-01-15

    Device parameters such as series and shunt resistances, saturation current and diode ideality factor influence the behaviour of the current-voltage (I-V) characteristics of solar cells and photovoltaic modules. It is necessary to determine these parameters since performance parameters are derived from the I-V curve and information provided by the device parameters are useful in analyzing performance losses. This contribution presents device parameters of CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells, as well as, CuInSe{sub 2}, mono- and multicrystalline silicon modules determined using a parameter extraction routine that employs Particle Swarm Optimization. The device parameters of the CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells show that the contribution of recombination mechanisms exhibited by high saturation current when coupled with the effects of parasitic resistances result in lower maximum power and conversion efficiency. Device parameters of photovoltaic modules extracted from I-V characteristics obtained at higher temperature show increased saturation current. The extracted values also reflect the adverse effect of temperature on parasitic resistances. The parameters extracted from I-V curves offer an understanding of the different mechanisms involved in the operation of the devices. The parameter extraction routine utilized in this study is a useful tool in determining the device parameters which reveal the mechanisms affecting device performance. (author)

  10. Design and evaluation of a thorium (IV) selective optode

    International Nuclear Information System (INIS)

    Safavi, Afsaneh; Sadeghi, Marzieh

    2006-01-01

    A novel optical sensor has been proposed for sensitive determination of thorium (IV) ion in aqueous solutions. The thorium sensing membrane was prepared by incorporating 4-(p-nitrophenyl azo)-pyrocatechol (NAP) as ionophore in the plasticized PVC membrane containing tributyl phosphate (TBP) as plasticizer. The membrane responds to thorium ion by changing color reversibly from yellow to red-brown in glycine buffer solution at pH 3.5. The proposed sensor displays a linear range of 8.66 x 10 -6 -2.00 x 10 -4 M with a limit of detection of 6 x 10 -6 M. The response time of the optode was about 8.8-12.5 min, depending on the concentration of Th (IV) ions. The selectivity of optode to Th (IV) ions in glycine buffer is good. The sensor can readily be regenerated by exposure to a solution mixture of sodium fluoride and 5-sulfosalicylic acid (dihydrate) (0.01 M each). The optode is fully reversible. The proposed optode was applied to the determination of thorium (IV) in environmental water samples

  11. Outdoor Biology Instructional Strategies Trial Edition, Set IV.

    Science.gov (United States)

    Throgmorton, Larry, Ed.; And Others

    Eight games are included in the 24 activities in the Outdoor Biology Instructional Strategies (OBIS) Trial Edition Set IV. There are also simulations, crafts, biological techniques, and organism investigations focusing on animal and plant life in the forest, desert, and snow. Designed for small groups of children ages 10 to 15 from schools and…

  12. Court Culture during the Reign of Christian IV

    DEFF Research Database (Denmark)

    Olden-Jørgensen, Sebastian

    2007-01-01

    Court culture can be defined as a range of cultural forms (festival culture, painting, literature, music, architecture) employed for the enhancement of princely status and the communication of political messages. Christian IV evidently set great store on court culture beginning with his magnificent...

  13. Locally advanced breast cancer (stage III and stage IV)

    International Nuclear Information System (INIS)

    Baracat, F.F.; Grabert, H.; Lima, G.R. de; Pontes, M.; Ferraro, O.; Santana, A.; Brook, E.S.

    1987-01-01

    The results concerning to the treatment of 193 patients with locally advanced breast cancer-stage III and stage IV are analysed. All the patients were treated with radical radiotherapy plus total mastectomy about 6 weeks later; 53 pacients received also chemotherapy (CMF - 12 courses) and 52 were oophorectomized. (M.A.C) [pt

  14. Sargent-IV Project. Development of new methodologies for safety analysis of Generation IV reactors; Proyecto SARGEB-IV. Desarrollo de nuevas metodologias de analisis de seguridad para reactores de Generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Queral, C.; Gallego, E.; Jimenez, G.

    2013-07-01

    The main result of this paper is the proposal for the addition of new ingredients in the safety analysis methodologies for Generation-IV reactors that integrates the features of probabilistic safety analysis within deterministic. This ensures a higher degree of integration between the classical deterministic and probabilistic methodologies.

  15. The Oxidation of Dibenzothiophene using Oxidovanadium(IV ...

    African Journals Online (AJOL)

    ... and EPR also confirmed the presence of oxidovanadium(IV) within the nanofibres. Oxidation of dibenzothiophene (DBT) was investigated by varying the catalyst amount, substrate amount, oxidant and temperature, and the progress of oxidation was followed with a gas chromatograph fitted with a flame ionization detector.

  16. DSM-IV-defined common mental disorders: Association with HIV ...

    African Journals Online (AJOL)

    Psychiatric diagnoses of depression, anxiety and substance abuse disorders were based on the Diagnostic and Statistical Manual, 4th edition (DSM-IV). HIVrelated fears, perceived risk and behaviour change were measured using multi-item scales. We analysed forms of behaviour change that were appropriate for risk ...

  17. OGLE-IV Transient Search report 26 August 2016

    Science.gov (United States)

    Wyrzykowski, L.; Sitek, M.; Kostrzewa-Rutkowska, Z.; Udalski, A.; Kozlowski, S.; Klencki, J.

    2016-08-01

    The OGLE-IV Transient Detection System (Wyrzykowski et al. 2014, AcA,64,197; Kozlowski et al. 2013; Klencki et al. 2016, AcA, 66,15) announces resumption of operation in the beginning of 2016B season and discovery of 45 new on-going transients.

  18. OGLE-IV Transient Search report 07 August 2015

    Science.gov (United States)

    Wyrzykowski, L.; Kostrzewa-Rutkowska, Z.; Udalski, A.; Kozlowski, S.; Poleski, R.; Pietrzynski, G.; Sitek, M.

    2015-08-01

    The OGLE-IV Transient Detection System (Wyrzykowski et al. 2014, AcA,64,197; Kozlowski et al. 2013) reports the discovery of 10 new transients. Most of them appeared near or on top of apparent galaxies and their light curves resemble those of supernovae near or after their peak brightness.

  19. Studies on the genus Atriplex L. (Amaranthaceae) in Italy. IV ...

    African Journals Online (AJOL)

    Studies on the genus Atriplex L. (Amaranthaceae) in Italy. IV. Atriplex bocconei Guss. – Atriplex bocconei Guss. is here typified on one herbarium specimen kept in NAP. The identity of the species is also clarified on the basis of literature analysis and examination of type material and other specimens that allowed to include it ...

  20. Coefficient of work-hardening in stage-IV

    CSIR Research Space (South Africa)

    Nabarro, FRN

    1994-04-15

    Full Text Available The theory of work hardening in stage IV depends on the relation between the relative misorientation Psi of neighbouring subgrains and the plastic strain gamma (Psi = B gamma exp). The value of the constant B is suggested to be better related...

  1. Effect of Cerium(IV)-Surfactant Reaction in Foam Decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Han Beom; Jung, Chong-Hun; Yoon, In-Ho; Kim, Chorong; Choi, Wang-Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Using foams allows the decommissioning of complex shaped facilities. The decontamination foam comprises at least one surfactant to generate the foam and one or more chemical reactants to achieve the dissolution of the contaminants at the solid surface. In order to improve the efficiency of decontamination foam, the present study attempts to find the optimum condition of chemical reagents to the foaming solution. The corrosion rate of radioactive nuclides contaminated stainless steel metal is very important factor for the foam decontamination process. The goal of this study is to develop the decontamination process for contaminated stainless steel in medium of nitric acid. Stainless steel needs a strong oxidizing agent such as Ce(IV) ion and the effects of cerium(IV). Surfactant interaction involved in foam decontamination and finally the improvement brought by formulation science. The formulation of foams loaded with strong oxidizing reagents such as Ce(IV) is an important factor. The enhanced decontamination properties of nitric acid with Ce(IV) additive on stainless steel is well known in liquid mediums. stainless steel metal is an important aspect in the foam decontamination process.

  2. ORIGINAL ARTICLES DSM-IV-defined common mental disorders ...

    African Journals Online (AJOL)

    mental disorders may increase HIV risk (e.g. by impairing risk perception and impulse control), ... analysis of the South African Stress and Health (SASH) study, a nationally ... taking more care over things touched; (iv) avoiding certain ... individually to assess potential differences between appropriate .... Gender (%). Male.

  3. Counsellors Respond to the DSM-IV-TR

    Science.gov (United States)

    Strong, Tom; Gaete, Joaquin; Sametband, Ines N.; French, Jared; Eeson, Jen

    2012-01-01

    The Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR) is an administrative fact for many counsellors. This psychiatric approach to formulating client concerns runs counter to those used by counsellors of many approaches (e.g., systemic, feminist). Using an online survey of counsellors (N = 116), invited contributions to a website…

  4. IV Bach conference on radiation chemistry. Abstracts of reports

    International Nuclear Information System (INIS)

    2005-01-01

    IV Bach conference on radiation chemistry was conducted in the framework of the conference Physico-chemical foundations of new technologies of XXI century. Problems of radiolysis of modern polymeric materials, post-irradiation examination of different organic and inorganic compounds treated with ionizing radiation, equipment used for these examinations, application of data obtained in these researches were represented in reports [ru

  5. Description of the IV + V System Software Package.

    Science.gov (United States)

    Microcomputers for Information Management: An International Journal for Library and Information Services, 1984

    1984-01-01

    Describes the IV + V System, a software package designed by the Institut fur Maschinelle Dokumentation for the United Nations General Information Programme and UNISIST to support automation of local information and documentation services. Principle program features and functions outlined include input/output, databank, text image, output, and…

  6. Streptococcus agalactiae Serotype IV in Humans and Cattle, Northern Europe

    DEFF Research Database (Denmark)

    Lyhs, Ulrike; Kulkas, Laura; Katholm, Jorgen

    2016-01-01

    not differentiate between populations isolated from different host species. Isolates from humans and cattle differed in lactose fermentation, which is encoded on the accessory genome and represents an adaptation to the bovine mammary gland. Serotype IV-ST196 isolates were obtained from multiple dairy herds in both...

  7. Title IV Indian Education Program Evaluation, 1985-86.

    Science.gov (United States)

    Albuquerque Public Schools, NM. Planning, Research and Accountability.

    Public schools in Albuquerque, New Mexico, used a Title IV Part A grant to assist American Indian elementary and secondary school students in receiving passing grades and improving school-related behaviors. Canoncito Navajo Reservation, the Isleta Pueblo, and urban Indian students in Albuquerque participated in the program. Personnel consisted of…

  8. Clinical Utility of Cancellation on the WISC-IV

    Science.gov (United States)

    Zhu, Jianjun; Chen, Hsinyi

    2013-01-01

    This study examined empirical evidence for clinical utility of the Wechsler Intelligence Scale for Children, fourth edition (WISC-IV) cancellation subtest by comparing data from 597 clinical and 597 matched control children. The results of dependent t and sequential logistic regression analyses demonstrated that (a) children with intellectual…

  9. WISC-IV GAI and CPI in Psychoeducational Assessment

    Science.gov (United States)

    Bremner, Dawn; McTaggart, Breanne; Saklofske, Donald H.; Janzen, Troy

    2011-01-01

    The General Ability Index (GAI) and Cognitive Proficiency Index (CPI) are two index scores that can be calculated for the Wechsler Intelligence Scale for Children-Fourth Canadian Edition (WISC-IV[superscript CDN]). The GAI comprises the verbal comprehension and perceptual reasoning subtests and reflects reasoning abilities. The CPI includes the…

  10. Grade IV fibrosis interferes in biliary drainage after Kasai procedure.

    Science.gov (United States)

    Salzedas-Netto, A A; Chinen, E; de Oliveira, D F; Pasquetti, A F; Azevedo, R A; da Silva Patricio, F F; Cury, E K; Gonzalez, A M; Vicentine, F P P; Martins, J L

    2014-01-01

    Biliary atresia (BA) is the most common cause of liver transplantation in children. The earlier the treatment is done, the better the prognosis. The aim is to evaluate the impact of late diagnosis in children with BA, including the histopathological findings and success rate of biliary drainage in patients submitted to hepatic portoenterostomy (HPE). A retrospective study of cases of BA in the Department of Pediatric Surgery, Federal University of São Paulo (UNIFESP) between 1998-2011. We found 63 cases of BA; of these, 42 underwent HPE and 21 were referred for liver transplantation. Clinic and pathologic data were evaluated. The HPE was performed with a mean age of 86.5 days, with 16.6% having the operation at 60 days or earlier; 59.2% between 61 and 90 days; and 23.8% after 90 days. Successful biliary drainage occurred in 31% of surgeries, Mean days when HPE drained was 69.1 days, and 94.3 days when the surgery did not drain (P = .05). All patients who were successfully drained, did not have grade IV fibrosis on histology. In cases in which surgery was performed after 60 days that had not drained, 25% had grade IV fibrosis on biopsy (P = .0469). The age of HPE relates to better prognosis of the disease. It was found that the rate of grade IV fibrosis is higher in no drainage patients. All patients with grade IV fibrosis had no biliary drainage. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Effect of Cerium(IV)-Surfactant Reaction in Foam Decontamination

    International Nuclear Information System (INIS)

    Yang, Han Beom; Jung, Chong-Hun; Yoon, In-Ho; Kim, Chorong; Choi, Wang-Kyu

    2015-01-01

    Using foams allows the decommissioning of complex shaped facilities. The decontamination foam comprises at least one surfactant to generate the foam and one or more chemical reactants to achieve the dissolution of the contaminants at the solid surface. In order to improve the efficiency of decontamination foam, the present study attempts to find the optimum condition of chemical reagents to the foaming solution. The corrosion rate of radioactive nuclides contaminated stainless steel metal is very important factor for the foam decontamination process. The goal of this study is to develop the decontamination process for contaminated stainless steel in medium of nitric acid. Stainless steel needs a strong oxidizing agent such as Ce(IV) ion and the effects of cerium(IV). Surfactant interaction involved in foam decontamination and finally the improvement brought by formulation science. The formulation of foams loaded with strong oxidizing reagents such as Ce(IV) is an important factor. The enhanced decontamination properties of nitric acid with Ce(IV) additive on stainless steel is well known in liquid mediums. stainless steel metal is an important aspect in the foam decontamination process

  12. IV srpsko-bugarska konferencija u Zrenjaninu 2005. godine

    Directory of Open Access Journals (Sweden)

    Dragana Antonijević

    2016-03-01

    Full Text Available U Zrenjaninu je  od 25. do 28. oktobra 2005. godine održana IV srpsko-bugarska konferencija na temu "Svakodnevna kultura u postsocijalističkom periodu u Srbiji i Bugarskoj: balkanska transformacija i evropska integracija". Konferenciju su organizovali Etnografski institut SANU iz Beograda, Etnografski institut i muzej BAN iz Sofije i Narodni muzej Zrenjanin.

  13. Verslavingsgedrag van DSM-IV naar DSM-5

    NARCIS (Netherlands)

    van den Brink, W.

    2014-01-01

    The 5th edition of the DSM was published in May, 2013. The new edition incorporates important changes in the classification of addiction. To compare the classification of addictive behaviours presented in DSM-IV with the classification presented in DSM-5 and to comment on the changes introduced into

  14. Enzymatic recovery of platinum (IV) from industrial wastewater using ...

    African Journals Online (AJOL)

    highest hydrogen-dependent platinum (IV) reducing activity in the presence of hydrogenase and its physiological electron carrier, cytochrome c3. When the purified hydrogenase enzyme (with and without cytochrome c3) was used with the industrial effluent, containing 7.9 mg.l-1 platinum, only 10 – 15% recovery was noted ...

  15. 78 FR 21491 - DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P.; Notice Seeking Exemption...

    Science.gov (United States)

    2013-04-10

    ... SMALL BUSINESS ADMINISTRATION [License No. 02/02-0662, 02/02-0661] DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P.; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that DeltaPoint Capital IV, L.P. and DeltaPoint...

  16. Adsorption of Th(IV) and Pu(IV) on the surface of Pseudomonas fluorescens and Bacillus subtilis in the presence of desferrioxamine siderophore

    International Nuclear Information System (INIS)

    Yoshida, Takahiro; Ozaki, Takuo; Ohnuki, Toshihiko; Francis, Arokiasamy J.

    2005-01-01

    Adsorption of Th(IV) and Pu(IV) on a Gram-negative bacterium Pseudomonas fluorescens and a Gram-positive bacterium Bacillus subtilis in the presence of siderophore desferrioxamine B (DFO) was studied. Thorium(IV) and Pu(IV) were dissociated from DFO during adsorption on the cells. Thorium(IV) adsorption on bacterial cells in the presence of DFO was larger than that of Pu(IV) because of the smaller stability of the Th(IV)-DFO complex than that of the Pu(IV)-DFO complex. On the other hand, adsorption of Pu(IV) was larger than that of Fe(III), wherein the stability of the Pu(IV)- and Fe(III)-DFO complex is comparable. P. fluorescens showed a higher affinity for Th(IV) and Pu(IV) than B. subtilis, though potentiometric titration of bacterial cells indicated that surfaces of P. fluorescens and B. subtilis cells showed similar proton binding properties. (author)

  17. Structural characterization of the Actinides (III) and (IV) - DOTA complexes

    International Nuclear Information System (INIS)

    Audras, Matthieu

    2014-01-01

    The polyamino-carboxylate anions have been identified as compounds of interest in the operations of actinide separation, in actinide migration in the environment and in human radio-toxicology. The structural characterization of complexes formed between actinides and polyamino-carboxylates ligands is essential for a better understanding of actinide-ligands interactions. Among the polyamino-carboxylate anions, the DOTA ligand (1,4,7,10-tetraaza-cyclododecane tetraacetic acid) is described as a very strong complexing agent of the lanthanides(III), but has been little studied with actinides. The objective of this thesis is to describe the complexes formed between the actinides (III) and (IV) and the DOTA ligand, and compare them with the lanthanide complexes. For this, an approach has been introduced to characterize the complexes by complementary analytical techniques (spectrophotometry, electro-spray ionization mass spectrometry, NMR, EXAFS, electrochemistry), but also by calculations of theoretical chemistry to help the interpretation of the experimental data. The formation of a 1:1 complex is observed with the actinides(III) (plutonium and americium) as for lanthanides(III): rapid formation of intermediate species which evolves slowly towards the formation of a limit complex. Within this complex, the cation is located inside the cavity formed by the ligand. Four nitrogen atoms and four oxygen atoms from the carboxylate functions are involved in the coordination sphere of the cation. However, differences were observed in the bond lengths formed between the cation and the nitrogen atoms (the bonds are somewhat shorter in the case of actinide complexes) as well as the complexation kinetics, which is slightly faster for the actinides(III) than for lanthanide(III) ions of equivalent radius. The same behavior was observed in solution upon complexation of actinides(IV) (uranium, plutonium and neptunium): slow formation of a 1:1 complex (actinide(IV):ligand) in wherein the

  18. Cytomorphologic features distinguishing Bethesda category IV thyroid lesions from parathyroid

    Directory of Open Access Journals (Sweden)

    Simon Sung

    2017-01-01

    Full Text Available Background: Thyroid follicular cells share similar cytomorphological features with parathyroid. Without a clinical suspicion, the distinction between a thyroid neoplasm and an intrathyroidal parathyroid can be challenging. The aim of this study was to assess the distinguishing cytomorphological features of parathyroid (including intrathyroidal and Bethesda category IV (Beth-IV thyroid follicular lesions, which carry a 15%–30% risk of malignancy and are often followed up with surgical resection. Methods: A search was performed to identify “parathyroid” diagnoses in parathyroid/thyroid-designated fine-needle aspirations (FNAs and Beth-IV thyroid FNAs (follicular and Hurthle cell, all with diagnostic confirmation through surgical pathology, immunocytochemical stains, Afirma® analysis, and/or clinical correlation. Unique cytomorphologic features were scored (0-3 or noted as present versus absent. Statistical analysis was performed using R 3.3.1 software. Results: We identified five FNA cases with clinical suspicion of parathyroid neoplasm, hyperthyroidism, or thyroid lesion that had an eventual final diagnosis of the parathyroid lesion (all female; age 20–69 years and 12 Beth-IV diagnoses (11 female, 1 male; age 13–64 years. The following cytomorphologic features are useful distinguishing features (P value: overall pattern (0.001, single cells (0.001, cell size compared to red blood cell (0.01, nuclear irregularity (0.001, presence of nucleoli (0.001, nuclear-to-cytoplasmic ratio (0.007, and nuclear chromatin quality (0.028. Conclusions: There are cytomorphologic features that distinguish Beth-IV thyroid lesions and (intrathyroidal parathyroid. These features can aid in rendering correct diagnoses and appropriate management.

  19. Policy-induced market introduction of Generation IV reactor systems

    International Nuclear Information System (INIS)

    Heek, Aliki Irina van; Roelofs, Ferry

    2011-01-01

    Almost 10 years ago the U.S. Department of Energy (DOE) started the Generation IV Initiative (GenIV) with 9 other national governments with a positive ground attitude towards nuclear energy. Some of these Generation IV systems, like the fast reactors, are nearing the demonstration stage. The question on how their market introduction will be implemented becomes increasingly urgent. One main topic for future reactor technologies is the treatment of radioactive waste products. Technological solutions to this issue are being developed. One possible process is the transformation of long-living radioactive nuclides into short living ones; a process known as transmutation, which can be done in a nuclear reactor only. Various Generation IV reactor concepts are suitable for this process, and of these systems most experience has been gained with the sodium-cooled fast reactor (SFR). However, both these first generation SFR plants and their Generation IV successors are designed as electricity generating plants, and therefore supposed to be commercially viable in the electricity markets. Various studies indicate that the generation costs of a combined LWR-(S)FR nuclear generating park (LWR: light water reactor) will be higher than that of an LWR-only park. To investigate the effects of the deployment of the different reactors and fuel cycles on the waste produced, resources used and costs incurred as a function of time, a dynamic fuel cycle assessment is performed. This study will focus on the waste impact of the introduction of a fraction of fast reactors in the European nuclear reactor park with a cost increase as described in the previous paragraph. The nuclear fuel cycle scenario code DANESS is used for this, as well as the nuclear park model of the EU-27 used for the previous study. (orig.)

  20. Hafnium(IV) complexation with oxalate at variable temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Friend, Mitchell T.; Wall, Nathalie A. [Washington State Univ., Pullmanm, WA (United States). Dept. of Chemistry

    2017-08-01

    Appropriate management of fission products in the reprocessing of spent nuclear fuel (SNF) is crucial in developing advanced reprocessing schemes. The addition of aqueous phase complexing agents can prevent the co-extraction of these fission products. A solvent extraction technique was used to study the complexation of Hf(IV) - an analog to fission product Zr(IV) - with oxalate at 15, 25, and 35 C in 1 M HClO{sub 4} utilizing a {sup 175+181}Hf radiotracer. The mechanism of the solvent extraction system of 10{sup -5} M Hf(IV) in 1 M HClO{sub 4} to thenoyltrifluoroacetone (TTA) in toluene demonstrated a 4{sup th}-power dependence in both TTA and H{sup +}, with Hf(TTA){sub 4} the only extractable species. The equilibrium constant for the extraction of Hf(TTA){sub 4} was determined to be log K{sub ex}=7.67±0.07 (25±1 C, 1 M HClO{sub 4}). The addition of oxalate to the aqueous phase decreased the distribution ratio, indicating aqueous Hf(IV)-oxalate complex formation. Polynomial fits to the distribution data identified the formation of Hf(ox){sup 2+} and Hf(ox){sub 2(aq)} and their stability constants were measured at 15, 25, and 35 C in 1 M HClO{sub 4}. van't Hoff analysis was used to calculate Δ{sub r}G, Δ{sub r}H, and Δ{sub r}S for these species. Stability constants were observed to increase at higher temperature, an indication that Hf(IV)-oxalate complexation is endothermic and driven by entropy.

  1. The generation IV nuclear reactor systems - Energy of future

    International Nuclear Information System (INIS)

    Ohai, Dumitru; Jianu, Adrian

    2006-01-01

    Ten nations joined within the Generation IV International Forum (GIF), agreeing on a framework for international cooperation in research. Their goal is to develop future-generation nuclear energy systems that can be licensed, constructed, and operated in an economically competitive way while addressing the issues of safety, proliferation, and other public perception concerns. The objective is for the Gen IV systems to be available for deployment by 2030. Using more than 100 nuclear experts from its 10 member nations, the GIF has developed a Gen IV Technology Roadmap to guide the research and development of the world's most advanced, efficient and safe nuclear power systems. The Gen IV Technology Roadmap calls for extensive research and development of six different potential future reactor systems. These include water-cooled, gas-cooled, liquid metal-cooled and nonclassical systems. One or more of these reactor systems will provide the best combination of safety, reliability, efficiency and proliferation resistance at a competitive cost. The main goals for the Gen IV Nuclear Energy Systems are: - Provide sustainable energy generation that meets clean air objectives and promotes long-term availability of systems and effective fuel use for worldwide energy production; - Minimize and manage their nuclear waste and noticeably reduce the long-term stewardship burden in the future, improving the protection of public health and the environment; - Increase the assurance that these reactors are very unattractive and the least desirable route for diversion or theft of weapons-usable materials, and provide increased protection against acts of terrorism; - Have a clear life-cycle cost advantage over other energy sources; - Have a level of financial risk comparable to other energy projects; - Excel in safety and reliability; - Have a low likelihood and degree of reactor core damage. (authors)

  2. Endogeneity in Panel Data Models with Time-Varying and Time-Fixed Regressors: To IV or not IV?

    DEFF Research Database (Denmark)

    Mitze, Timo

    We analyse the problem of parameter inconsistency in panel data econometrics due to the correlation of exogenous variables with the error term.A common solution in this setting is to use Instrumental-Variable (IV) estimation in the spirit of Hausman-Taylor (1981). However, some potential shortcom...

  3. Functionalization of group IV semiconductors; Funktionalisierung von Gruppe IV-Halbleitern

    Energy Technology Data Exchange (ETDEWEB)

    Hoeb, Marco Andreas

    2011-01-15

    The present work is focused on the structural and electronic properties of thermally and photochemically grafted alkene molecules. The semiconductor substrates used in this work are the group IV-semiconductors silicon, diamond, and silicon carbide. On silicon, functionalization via the commonly known hydrosilylation reaction was performed. During thermal treatment in vacuum-distilled 1-octadecene, the alkene molecules covalently added to the substrate via Si-C bond formation, resulting in self-assembled organic monolayers. The reaction resulted in smooth and homogeneous alkyl-terminated surfaces. Static water contact angles were determined to be 113 . Photoelectron spectroscopy was performed and showed no evidence of surface oxidation. The high packing of the organic layers is indicated by the asymmetric methylene vibrational mode, which has been redshifted by -4 cm{sup -1} with respect to the liquid alkene mode position. The average molecular tilt-angle of the alkyl-molecules, relative to the surface normal, has been identified to be 34 . The transport properties have been determined to be dominated by tunneling processes. On diamond, first results on the thermal functionalization of hydrogen- and oxygen-terminated surfaces are demonstrated. Thermal functionalization with octadecene showed high selectivity, while hydrogenated diamond surfaces were found to be inert to the thermally induced reaction with alkenes. In contrast, alkene molecules were successfully grafted to oxygen-terminated sites via covalent C-O-C bonds. Reaction temperatures as high as 160 C were necessary to initiate the functionalization process.Wetting experiments on the alkyl-modified surfaces revealed contact angle values of 103 . The high quality of the monolayers on oxygenated surfaces was confirmed by IR-spectroscopy. In addition, polarized IR-measurements indicated a tilt angle of 23 . On silicon carbide, thermal and UV-induced alkoxylation were studied. Hydrofluoric acid treatment

  4. Synthesis and spectroscopic studies of mono- and dicyclopentadienyl titanium (IV)/zirconium (IV) derivatives with S-alkyl-β-N-(acetylferrocenyl) methylene dithiocarbazates

    International Nuclear Information System (INIS)

    Srivastava, B.K.; Srivastava, S.K.; Pandey, O.P.; Sengupta, S.K.

    1996-01-01

    The reactions of dicyclopentadienyl titanium (IV)/zirconium (IV) dichloride and monocyclopentadienyl titanium (IV) trichloride with thio-Schiff bases (LH), derived by the condensation of S-methyl/ethyl/propyl dithiocarbazic acid and acetylferrocene have been carried out under inert atmosphere and anhydrous conditions in different stoichiometric ratios. Complexes of the types Cp 2 M(L)Cl, CpM(L) 2 Cl (M= Ti(IV) or Zr(IV)), CpTi(L)Cl 2 , CpTi(L) 2 Cl are synthesised and characterized by elemental analysis, electrical conductance, magnetic moment and spectral (electronic, infrared, 1 H NMR) data. (author). 12 refs., 1 tab

  5. A Comprehensive Functional Analysis of NTRK1 Missense Mutations Causing Hereditary Sensory and Autonomic Neuropathy Type IV (HSAN IV).

    Science.gov (United States)

    Shaikh, Samiha S; Chen, Ya-Chun; Halsall, Sally-Anne; Nahorski, Michael S; Omoto, Kiyoyuki; Young, Gareth T; Phelan, Anne; Woods, Christopher Geoffrey

    2017-01-01

    Hereditary sensory and autonomic neuropathy type IV (HSAN IV) is an autosomal recessive disorder characterized by a complete lack of pain perception and anhidrosis. Here, we studied a cohort of seven patients with HSAN IV and describe a comprehensive functional analysis of seven novel NTRK1 missense mutations, c.1550G >A, c.1565G >A, c.1970T >C, c.2096T >C, c.2254T >A, c.2288G >C, and c.2311C >T, corresponding to p.G517E, p.G522E, p.L657P, p.I699T, p.C752S, p.C763S, and p.R771C, all of which were predicted pathogenic by in silico analysis. The results allowed us to assess the pathogenicity of each mutation and to gain novel insights into tropomyosin receptor kinase A (TRKA) downstream signaling. Each mutation was systematically analyzed for TRKA glycosylation states, intracellular and cell membrane expression patterns, nerve growth factor stimulated TRKA autophosphorylation, TRKA-Y496 phosphorylation, PLCγ activity, and neurite outgrowth. We showed a diverse range of functional effects: one mutation appeared fully functional, another had partial activity in all assays, one mutation affected only the PLCγ pathway and four mutations were proved null in all assays. Thus, we conclude that complete abolition of TRKA kinase activity is not the only pathogenic mechanism underlying HSAN IV. By corollary, the assessment of the clinical pathogenicity of HSAN IV mutations is more complex than initially predicted and requires a multifaceted approach. © 2016 WILEY PERIODICALS, INC.

  6. A Computer Program to Compile a Flander-Amidon Interaction Analysis Matrix

    Science.gov (United States)

    Hardy, Robert C.

    1970-01-01

    A program was written in FORTRAN IV for an IBM 3600 to produce the Flanders-Amidon Interaction Analysis Matrix and to also produce percentages of certain p FORTRAN IV and V for the Univac 1108. (Editor/RT)

  7. PREVENTION OF SPINAL DISORDERS IN CHILDRENI- IV GRADE

    Directory of Open Access Journals (Sweden)

    Dejаn Gojković

    2012-09-01

    Full Text Available Problem physical activities children younger school-age children, with the basic tasks research is construction kinesitherapy adequate prevention and avoid postural disorders spinal column, optimal ontogenetic level morphological( anthropological development.The main objective research is contents teaching physical education as well as and content that can be put in regular program teaching physical education with the basic task prevention potential and eliminate disorders spinal column, with auxiliary a harmonious biological development. The entities from which he was carried out sample size for this research is defined as population students male primary schools I- IV grade.The first and basic condition was that they are included in teaching physical education in the course of this research sample is taked 400 respondents.-according to the manner elections respondents sample was targeted selected.were taken I- IV grade elementary schools in Bijeljina, Teslic, Foca and Pale.

  8. Target Selection for the SDSS-IV APOGEE-2 Survey

    Energy Technology Data Exchange (ETDEWEB)

    Zasowski, G. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Cohen, R. E.; Carlberg, J. K.; Fleming, Scott W. [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Chojnowski, S. D.; Holtzman, J. [Department of Astronomy, New Mexico State University, Las Cruces, NM 88001 (United States); Santana, F. [Departamento de Astronomía, Universidad de Chile, Santiago (Chile); Oelkers, R. J.; Bird, J. C. [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN 37235 (United States); Andrews, B. [PITT PACC, Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Beaton, R. L. [The Observatories of the Carnegie Institution for Science, Pasadena, CA 91101 (United States); Bender, C.; Cunha, K. [Steward Observatory, The University of Arizona, Tucson, AZ 85719 (United States); Bovy, J. [Department of Astronomy and Astrophysics and Dunlap Institute for Astronomy and Astrophysics, University of Toronto, Toronto, ON M5S 3H4 (Canada); Covey, K. [Department of Physics and Astronomy, Western Washington University, Bellingham, WA 98225 (United States); Dell’Agli, F.; García-Hernández, D. A. [Departamento de Astrofísica, Universidad de La Laguna, and Instituto de Astrofísica de Canarias, La Laguna, Tenerife (Spain); Frinchaboy, P. M. [Department of Physics and Astronomy, Texas Christian University, Fort Worth, TX 76129 (United States); Harding, P. [Department of Astronomy, Case Western Reserve University, Cleveland, OH 44106 (United States); Johnson, J. A., E-mail: gail.zasowski@gmail.com [Department of Astronomy, The Ohio State University, Columbus, OH 43210 (United States); and others

    2017-11-01

    APOGEE-2 is a high-resolution, near-infrared spectroscopic survey observing ∼3 × 10{sup 5} stars across the entire sky. It is the successor to APOGEE and is part of the Sloan Digital Sky Survey IV (SDSS-IV). APOGEE-2 is expanding on APOGEE’s goals of addressing critical questions of stellar astrophysics, stellar populations, and Galactic chemodynamical evolution using (1) an enhanced set of target types and (2) a second spectrograph at Las Campanas Observatory in Chile. APOGEE-2 is targeting red giant branch and red clump stars, RR Lyrae, low-mass dwarf stars, young stellar objects, and numerous other Milky Way and Local Group sources across the entire sky from both hemispheres. In this paper, we describe the APOGEE-2 observational design, target selection catalogs and algorithms, and the targeting-related documentation included in the SDSS data releases.

  9. Target Selection for the SDSS-IV APOGEE-2 Survey

    International Nuclear Information System (INIS)

    Zasowski, G.; Cohen, R. E.; Carlberg, J. K.; Fleming, Scott W.; Chojnowski, S. D.; Holtzman, J.; Santana, F.; Oelkers, R. J.; Bird, J. C.; Andrews, B.; Beaton, R. L.; Bender, C.; Cunha, K.; Bovy, J.; Covey, K.; Dell’Agli, F.; García-Hernández, D. A.; Frinchaboy, P. M.; Harding, P.; Johnson, J. A.

    2017-01-01

    APOGEE-2 is a high-resolution, near-infrared spectroscopic survey observing ∼3 × 10 5 stars across the entire sky. It is the successor to APOGEE and is part of the Sloan Digital Sky Survey IV (SDSS-IV). APOGEE-2 is expanding on APOGEE’s goals of addressing critical questions of stellar astrophysics, stellar populations, and Galactic chemodynamical evolution using (1) an enhanced set of target types and (2) a second spectrograph at Las Campanas Observatory in Chile. APOGEE-2 is targeting red giant branch and red clump stars, RR Lyrae, low-mass dwarf stars, young stellar objects, and numerous other Milky Way and Local Group sources across the entire sky from both hemispheres. In this paper, we describe the APOGEE-2 observational design, target selection catalogs and algorithms, and the targeting-related documentation included in the SDSS data releases.

  10. Review on Korea Participation of Generation IV International Forum (GIF)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jewhan; Jeong, Ji-Young; Hahn, Dohee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Generation IV International Forum (GIF) originates from US proposal of an initiative in 2000. The vision was to leapfrog LWR technology and collaborate with international partners to share R and D on advanced nuclear systems. Nine countries and EU joined the initiative and Gen IV concept was defined via technology goals and legal framework. Two years study with more than 100 experts worldwide has evaluated nearly 100 reactor designs and down selected six most promising concepts. In 2005, the first signatures on Framework Agreement were collected and the first research projects were defined in 2006. Korea is one of the founding members of GIF and actively participating in various areas. In 2013, TD was assigned to Korean expert and Korea is endeavoring to enhance the benefit of participation since this turning point. In this paper, pros and cons of engaging with GIF were briefly introduced and items to maximize the benefit were suggested.

  11. Validation of the Portuguese DSM-IV-MR-J.

    Science.gov (United States)

    Calado, Filipa; Alexandre, Joana; Griffiths, Mark D

    2016-01-01

    Youth problem gambling is viewed as an emergent public health issue in many countries, and is also an emerging area of public concern in Portugal. However, there is currently no Portuguese instrument that focuses specifically on the measurement of problem gambling among young people. Consequently, the present study aimed to validate the DSM-IV-MR-J for use among Portuguese adolescents and to examine its' psychometric properties. A cross-cultural adaption of this instrument to the Portuguese language was performed using the translation and back translation method. The final version of the instrument was administered to 753 Portuguese high school and first year college students. The findings revealed an acceptable internal reliability and replicated the one-factor structure of this scale. Based on these findings, the Portuguese DSM-IV-MR-J appears to be a valid and reliable instrument, and provides a much needed psychometric tool for the development of more research on youth gambling in Portugal.

  12. Review on Korea Participation of Generation IV International Forum (GIF)

    International Nuclear Information System (INIS)

    Lee, Jewhan; Jeong, Ji-Young; Hahn, Dohee

    2015-01-01

    Generation IV International Forum (GIF) originates from US proposal of an initiative in 2000. The vision was to leapfrog LWR technology and collaborate with international partners to share R and D on advanced nuclear systems. Nine countries and EU joined the initiative and Gen IV concept was defined via technology goals and legal framework. Two years study with more than 100 experts worldwide has evaluated nearly 100 reactor designs and down selected six most promising concepts. In 2005, the first signatures on Framework Agreement were collected and the first research projects were defined in 2006. Korea is one of the founding members of GIF and actively participating in various areas. In 2013, TD was assigned to Korean expert and Korea is endeavoring to enhance the benefit of participation since this turning point. In this paper, pros and cons of engaging with GIF were briefly introduced and items to maximize the benefit were suggested

  13. Determination of Cerium (IV) Using Rhodamine 6G Fluorescence Quenching

    Science.gov (United States)

    Zhao, Zh.; Sheng, L.; Su, B.; Tao, C.; Jing, W.

    2017-11-01

    The interaction between rhodamine 6G (Rh6G) and cerium sulfate was studied by the fluorescence quenching method. In a sulfuric acid medium, the interaction of Ce(IV) with Rh6G results in Rh6G fluorescence quenching. The maximum excitation wavelength (λex) and the maximum emission wavelength (λem) are 530 nm and 555 nm, respectively. A good linearity between the relative fl uorescence intensity (ΔF) and Ce(IV) was observed in the range 0.12-1.08 μg/mL. The detection limit was 1.4 × 10-3 μg/mL. The optimum reaction conditions, influencing factors, and effect of coexisting substances were investigated in the experiment. We found that the concentration of Rh6G was 3.2 × 10-6 mol/L, and the fl uorescence intensity was maximum.

  14. The rate of adverse events during IV conscious sedation.

    Science.gov (United States)

    Schwamburger, Nathan T; Hancock, Raymond H; Chong, Chol H; Hartup, Grant R; Vandewalle, Kraig S

    2012-01-01

    Conscious sedation has become an integral part of dentistry; it is often used to reduce anxiety or fear in some patients during oral surgery, periodontal surgery, implant placement, and general dentistry procedures. The purpose of this study was to evaluate the frequency of adverse events during IV conscious sedation provided by credentialed general dentists and periodontists in the United States Air Force (USAF). Sedation clinical records (Air Force Form 1417) from calendar year 2009 were requested from all USAF bases. A total of 1,468 records were reviewed and 19 adverse events were noted in 17 patients. IV complication (infiltration) was the most common adverse event. The overall adverse event rate was 1.3 per 100 patients treated. The results of this study show that moderate sedation provided by general dentists and periodontists in the USAF has a low incidence of adverse events, and conscious sedation remains a viable option for providers for the reduction of anxiety in select patients.

  15. Adult presentation of Bartter syndrome type IV with erythrocytosis.

    Science.gov (United States)

    Heilberg, Ita Pfeferman; Tótoli, Cláudia; Calado, Joaquim Tomaz

    2015-01-01

    Bartter syndrome comprises a group of rare autosomal-recessive salt-losing disorders with distinct phenotypes, but one unifying pathophysiology consisting of severe reductions of sodium reabsorption caused by mutations in five genes expressed in the thick ascending limb of Henle, coupled with increased urinary excretion of potassium and hydrogen, which leads to hypokalemic alkalosis. Bartter syndrome type IV, caused by loss-of-function mutations in barttin, a subunit of chloride channel CLC-Kb expressed in the kidney and inner ear, usually occurs in the antenatal-neonatal period. We report an unusual case of late onset presentation of Bartter syndrome IV and mild phenotype in a 20 years-old man who had hypokalemia, deafness, secondary hyperparathyroidism and erythrocytosis.

  16. Silica from triethylammonium tris (oxalato) silicate (IV) thermal decomposition

    International Nuclear Information System (INIS)

    Ferracin, L.C.; Ionashiro, M.; Davolos, M.R.

    1990-01-01

    Silica can be obtained from differents precursors by differents methods. In this paper it has been investigated the thermal decomposition of triethylammonium tris (oxalato) silicate (IV) to render silica. Among the trisoxalato-complexes of silicon preparation methods reviewed it has been used the Bessler's one with the reflux adaptaded in microwave oven. Thermal decomposition analysis of the compound has been made by TG-DTG and DTA curves. Silica powders obtained and heated between 300 to 900 0 C in a oven were characterized by infrared vibrational spectroscopy, X-ray powder difraction and nitrogen adsorption isotherm (BET). The triethylammonium tris (oxalato) silicate (IV) thermal decomposition takes place at 300 0 C and the silica powder obtained is non cristalline with impurities that are eliminated with heating at 400 0 C. (author) [pt

  17. DSM-5 Personality Traits and DSM-IV Personality Disorders

    Science.gov (United States)

    Hopwood, Christopher J.; Thomas, Katherine M.; Markon, Kristian E.; Wright, Aidan G.C.; Krueger, Robert F.

    2014-01-01

    Two issues pertinent to the DSM-5 proposal for personality pathology, the recovery of DSM-IV personality disorders (PDs) by proposed DSM-5 traits and the validity of the proposed DSM-5 hybrid model which incorporates both personality pathology symptoms and maladaptive traits, were evaluated in a large undergraduate sample (N = 808). Proposed DSM-5 traits as assessed with the Personality Inventory for DSM-5 explained a substantial proportion of variance in DSM-IV PDs as assessed with the Personality Diagnostic Questionnaire-4+, and trait indicators of the six proposed DSM-5 PDs were mostly specific to those disorders with some exceptions. Regression analyses support the DSM-5 hybrid model in that pathological traits and an indicator of general personality pathology severity provided incremental information about PDs. Findings are discussed in the context of broader issues around the proposed DSM-5 model of personality disorders. PMID:22250660

  18. JRC-IE's research of safety of Gen IV systems

    International Nuclear Information System (INIS)

    Tsige-Tamirat, H.; Ranguelova, V.; Feutterer, M.; Ammirabile, L.; Carlsson, J.; D'Agata, E.; Laurie, M.; Magallon, D.

    2010-01-01

    The Institute for Energy (IE), one of the seven scientific Institutes of the Joint Research Centre (JRC) of the European Commission, has the mission to provide scientific and technical support for the conception, development, implementation and monitoring of community policies related to energy. To accomplish its mission, IE performs research in the areas of renewable energies, safety and sustainability of nuclear energy for current and future reactor systems, energy technic/economic assessment, and security of energy supply. The Generation IV International Forum (GIF) is a cooperative international endeavour organized to carry out R and D needed to establish the feasibility and performance capabilities of the next generation nuclear energy systems and support the progress towards their realization. The EU, represented by EURATOM and with the JRC as implementing agent, is working together with other GIF partners to perform pre-competitive R and D on key technologies to be implemented in future nuclear systems. IE is engaged in experimental research, simulation and modeling, scientific, feasibility and engineering studies on innovative nuclear reactor systems needed to support the EURATOM contribution to GEN IV initiative, in particular in assessment of innovative fuels and materials, development of new reactor core concepts and safety solutions and knowledge management and preservation. IE's research activities on Generation IV reactor systems are focused on the assessment of the potential of such systems to meet long term EU energy needs with respect to economical advantages, enhanced safety, sustainability, and proliferation resistance. IE participates in international collaborations and has bilateral research cooperation both with European and non-European partners. This paper gives an overview of IE's current research activities on the Gen IV reactor systems related to safety. (authors)

  19. Development of Basic Key Technologies for Gen IV SFR

    International Nuclear Information System (INIS)

    Han, Do Hee; Kim, Young In; Won, Byung Chool

    2008-11-01

    Technical specifications such as power capacity, type of core, clad alloy, clad barrier material, number of loops, type of SG tube have been evaluated and a optimal design concept has been identified to satisfy the technology goals of Generation IV nuclear systems. The concept for breakeven design is featured by the heat capacity of 1,200 MWe, enrichment-separated core, 2-loop, double-walled SG tube, and a long-life sensor system for in-service inspection

  20. Fytochemický výzkum Evolvulus alsinoides IV.

    OpenAIRE

    Svačinová, Jana

    2006-01-01

    Svačinová Jana: Rigorous thesis (2006) PHYTOCHEMICAL STUDY OF EVOLVULUS ALSINOIDES IV. This thesis deals with phytochemical research of plant Evolvulus alsinoides from family Convolvulaceae. Petrolether extract of leaves was separated by column and preparative TLC chromatography. Mixture of esters of 3-methoxy-4-hydroxycinnamic acid with long linear alcohols has been isolated and confirmed by 1 H NMR and MS spectrum. Its antiradical and platelet antiaggregatory activity was established.