WorldWideScience

Sample records for machine operator cardiopulmonary

  1. Stirling machine operating experience

    Energy Technology Data Exchange (ETDEWEB)

    Ross, B. [Stirling Technology Co., Richland, WA (United States); Dudenhoefer, J.E. [Lewis Research Center, Cleveland, OH (United States)

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  2. Machine Tool Operation, Course Description.

    Science.gov (United States)

    Denny, Walter E.; Anderson, Floyd L.

    Prepared by an instructor and curriculum specialists, this course of study was designed to meet the individual needs of the dropout and/or hard-core unemployed youth by providing them skill training, related information, and supportive services knowledge in machine tool operation. The achievement level of each student is determined at entry, and…

  3. Standardized Curriculum for Machine Tool Operation/Machine Shop.

    Science.gov (United States)

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

  4. Machine Protection and Operation for LHC

    CERN Document Server

    Wenninger, J.

    2016-01-01

    Since 2010 the Large Hadron Collider (LHC) is the accelerator with the highest stored energy per beam, with a record of 140 MJ at a beam energy of 4 TeV, almost a factor of 50 higher than other accelerators. With such a high stored energy, machine protection aspects set the boundary conditions for operation during all phases of the machine cycle. Only the low-intensity commissioning beams can be considered as relatively safe. This document discusses the interplay of machine operation and machine protection at the LHC, from commissioning to regular operation.

  5. 53. Improved outcome of cardio-pulmonary arrest in post-operative cardiac children resuscitated in critical care setup

    Directory of Open Access Journals (Sweden)

    Hussam Hamadah

    2015-10-01

    Conclusions: The current outcome of cardio-pulmonary arrest in post-operative cardiac children has improved. Majority of cardiac arrest were successfully resuscitated with ROSC and 80% survived to discharge. The current result reflects significant improvement in the reported outcome of children who had cardio-pulmonary arrest in post-operative cardiac children in PCICU setup.

  6. Operating System For Numerically Controlled Milling Machine

    Science.gov (United States)

    Ray, R. B.

    1992-01-01

    OPMILL program is operating system for Kearney and Trecker milling machine providing fast easy way to program manufacture of machine parts with IBM-compatible personal computer. Gives machinist "equation plotter" feature, which plots equations that define movements and converts equations to milling-machine-controlling program moving cutter along defined path. System includes tool-manager software handling up to 25 tools and automatically adjusts to account for each tool. Developed on IBM PS/2 computer running DOS 3.3 with 1 MB of random-access memory.

  7. Operating System For Numerically Controlled Milling Machine

    Science.gov (United States)

    Ray, R. B.

    1992-01-01

    OPMILL program is operating system for Kearney and Trecker milling machine providing fast easy way to program manufacture of machine parts with IBM-compatible personal computer. Gives machinist "equation plotter" feature, which plots equations that define movements and converts equations to milling-machine-controlling program moving cutter along defined path. System includes tool-manager software handling up to 25 tools and automatically adjusts to account for each tool. Developed on IBM PS/2 computer running DOS 3.3 with 1 MB of random-access memory.

  8. Effect of lornoxicam in lung inflammatory response syndrome after operations for cardiac surgery with cardiopulmonary bypass

    Science.gov (United States)

    Tsakiridis, Kosmas; Vretzkakis, Giorgos; Mikroulis, Dimitris; Mpakas, Andreas; Kesisis, Georgios; Arikas, Stamatis; Kolettas, Alexandros; Moschos, Giorgios; Katsikogiannis, Nikolaos; Machairiotis, Nikolaos; Tsiouda, Theodora; Siminelakis, Stavros; Beleveslis, Thomas; Zarogoulidis, Konstantinos

    2014-01-01

    Background The establishment of Extracorporeal Circulation (EC) significantly contributed to improvement of cardiac surgery, but this is accompanied by harmful side-effects. The most important of them is systemic inflammatory response syndrome. Many efforts have been undertaken to minimize this problem but unfortunately without satisfied solution to date. Materials and methods Lornoxicam is a non steroid anti-inflammatory drug which temporally inhibits the cycloxygenase. In this clinical trial we study the effect of lornoxicam in lung inflammatory response after operations for cardiac surgery with cardiopulmonary bypass. In our study we conclude 14 volunteers patients with ischemic coronary disease undergoing coronary artery bypass grafting with EC. In seven of them 16 mg lornoxicam was administered iv before the anesthesia induction and before the connection in heart-lung machine. In control group (7 patients) we administered the same amount of normal saline. Results Both groups are equal regarding pro-operative and intra-operative parameters. The inflammatory markers were calculated by Elisa method. We measured the levels of cytokines (IL-6, IL-8, TNF-a), adhesion molecules (ICAM-1, e-Selectin, p-Selectin) and matrix metaloproteinase-3 (MMP-3) just after anesthesia induction, before and after cardiopulmonary bypass, just after the patients administration in ICU and after 8 and 24 hrs. In all patients we estimated the lung’s inflammatory reaction with lung biopsy taken at the begging and at the end of the operation. We calculated hemodynamics parameters: Cardiac Index (CI), Systemic Vascular Resistance Index (SVRI), Pulmonary Vascular Resistance Index (PVRI), Left Ventricular Stroke Work Index (LVSWI), Right Ventricular Stroke Work Index (RVSWI), and the Pulmonary arterial pressure, and respiratory parameters too: alveolo-arterial oxygen difference D (A-a), intrapulmonary shunt (Qs/Qt) and pulmonary Compliance. IL-6 levels of lornoxicam group were statistical

  9. Machine Learning with Operational Costs

    CERN Document Server

    Tulabandhula, Theja

    2011-01-01

    This work concerns the way that statistical models are used to make decisions. In particular, we aim to merge the way estimation algorithms are designed with how they are used for a subsequent task. Our methodology considers the operational cost of carrying out a policy, based on a predictive model. The operational cost becomes a regularization term in the learning algorithm's objective function, allowing either an \\textit{optimistic} or \\textit{pessimistic} view of possible costs. Limiting the operational cost reduces the hypothesis space for the predictive model, and can thus improve generalization. We show that different types of operational problems can lead to the same type of restriction on the hypothesis space, namely the restriction to an intersection of an $\\ell_{q}$ ball with a halfspace. We bound the complexity of such hypothesis spaces by proposing a technique that involves counting integer points in polyhedrons.

  10. Machine Operator Training Program and Curriculum.

    Science.gov (United States)

    St. Cyr, David; And Others

    This curriculum contains materials for use in duplicating the 11-week course for machine operators that was implemented at New Hampshire Vocational-Technical College in Nashua, New Hampshire. Addressed in the course, which is designed to prepare entry-level employees, are the following topics: basic math, blueprint reading, layout tools and…

  11. Ensuring Machine and Tractor Aggregates Operability

    Science.gov (United States)

    Redreev, G. V.

    2016-08-01

    the operability of the machine and tractor aggregates is ensured by processes which occur in machine units and considered as technical systems. In order to develop theoretical understanding of the processes in technical systems as the basis and purpose of the repairserving actions, the author's concept is presented which relies on on the basic concepts of "processes in technical systems", "maintenance and repair of performers", "maintenance and repair of technology" "objectives of the maintenance and repair". Analysis of the basic concepts of "processes in technical systems" made possible to distinguishing four types of relations: of order, stipulation, exactingness, and non-contradiction. It is shown that the implementation of maintenance and repair of technology should be conducted according to the assessment of the effectiveness of processes in technical systems, revealed in complex diagnosis. The perfection of the design of the machine in terms of its technical operation can be estimated according to the degree of consistency of processes in technical systems, purposes of maintenance and repair. In order to increase the efficiency of the lubrication system,the modernised design of the centrifugal oil filter with permanent control of its cleaning power is offered, which allows changing the technology of the maintenance of engine lubrication system by separating the operations of crankcase oil replacement and the rotor filter cleaning.

  12. MACHINING OPTIMISATION AND OPERATION ALLOCATION FOR NC LATHE MACHINES IN A JOB SHOP MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    MUSSA I. MGWATU

    2013-08-01

    Full Text Available Numerical control (NC machines in a job shop may not be cost and time effective if the assignment of cutting operations and optimisation of machining parameters are overlooked. In order to justify better utilisation and higher productivity of invested NC machine tools, it is necessary to determine the optimum machining parameters and realize effective assignment of cutting operations on machines. This paper presents two mathematical models for optimising machining parameters and effectively allocating turning operations on NC lathe machines in a job shop manufacturing system. The models are developed as non-linear programming problems and solved using a commercial LINGO software package. The results show that the decisions of machining optimisation and operation allocation on NC lathe machines can be simultaneously made while minimising both production cost and cycle time. In addition, the results indicate that production cost and cycle time can be minimised while significantly reducing or totally eliminating idle times among machines.

  13. Local Search Method for a Parallel Machine Scheduling Problemof Minimizing the Number of Machines Operated

    Science.gov (United States)

    Yamana, Takashi; Iima, Hitoshi; Sannomiya, Nobuo

    Although there have been many studies on parallel machine scheduling problems, the number of machines operated is fixed in these studies. It is desirable to generate a schedule with fewer machines operated from the viewpoint of the operation cost of machines. In this paper, we cope with a problem of minimizing the number of parallel machines subject to the constraint that the total tardiness is not greater than the value given in advance. For this problem, we introduce a local search method in which the number of machines operated is changed efficiently and appropriately in a short time as well as reducing the total tardiness.

  14. Fault tolerant operation of switched reluctance machine

    Science.gov (United States)

    Wang, Wei

    The energy crisis and environmental challenges have driven industry towards more energy efficient solutions. With nearly 60% of electricity consumed by various electric machines in industry sector, advancement in the efficiency of the electric drive system is of vital importance. Adjustable speed drive system (ASDS) provides excellent speed regulation and dynamic performance as well as dramatically improved system efficiency compared with conventional motors without electronics drives. Industry has witnessed tremendous grow in ASDS applications not only as a driving force but also as an electric auxiliary system for replacing bulky and low efficiency auxiliary hydraulic and mechanical systems. With the vast penetration of ASDS, its fault tolerant operation capability is more widely recognized as an important feature of drive performance especially for aerospace, automotive applications and other industrial drive applications demanding high reliability. The Switched Reluctance Machine (SRM), a low cost, highly reliable electric machine with fault tolerant operation capability, has drawn substantial attention in the past three decades. Nevertheless, SRM is not free of fault. Certain faults such as converter faults, sensor faults, winding shorts, eccentricity and position sensor faults are commonly shared among all ASDS. In this dissertation, a thorough understanding of various faults and their influence on transient and steady state performance of SRM is developed via simulation and experimental study, providing necessary knowledge for fault detection and post fault management. Lumped parameter models are established for fast real time simulation and drive control. Based on the behavior of the faults, a fault detection scheme is developed for the purpose of fast and reliable fault diagnosis. In order to improve the SRM power and torque capacity under faults, the maximum torque per ampere excitation are conceptualized and validated through theoretical analysis and

  15. Evidence of Allergic Reactions and Cardiopulmonary Impairments among Traders Operating from Foodstuff Warehouses

    Science.gov (United States)

    Egbosionu, Viola; Ibeneme, Georgian; Ezuma, Amarachi; Ettu, Theresa; Nwankwo, Joseph; Limaye, Dnyanesh; Nna, Emmanuel

    2016-01-01

    Background. Foodstuff traders operating from warehouses (FTFW) are potentially exposed to dangerous rodenticides/pesticides that may have adverse effects on cardiopulmonary function. Methods. Fifty consenting male foodstuff traders, comprising 15 traders (21–63 years) operating outside warehouses and 35 FTFW (20–64 years), were randomly recruited at Ogbete Market, Enugu, in a cross-sectional observational study of spirometric and electrocardiographic parameters. Seventeen FTFW (21–57 years) participated in focus group discussions. Qualitative and quantitative data were analysed thematically and with independent t-test and Pearson correlation coefficient at p 0.05) with a significantly prolonged (p < 0.05) QTc interval. Conclusion. Allergic response was evident in the FTFW. Significant decrease in FVC may negatively impact lung flow rates and explains the marginal decrease in FEF25–75, which implies a relative limitation in airflow of peripheral/distal airways and elastic recoil of the lungs. This is consistent with obstructive pulmonary disease; a significant decrease in FEF75–85/FEV1 supports this conclusion. Significant decrease in FEF200–1200 indicates abnormalities in the large airways/larynx just as significantly prolonged ventricular repolarization suggests cardiac arrhythmias. PMID:28116288

  16. Job Grading Standard for Machine Tool Operator, WG-3431.

    Science.gov (United States)

    Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

    The standard covers nonsupervisory work involved in the set up, adjustment, and operation of conventional machine tools to perform machining operations in the manufacture and repair of castings, forgings, or parts from raw stock made of various metals, metal alloys, and other materials. A general description of the job at both the WG-8 and WG-9…

  17. Refrigerating machine operating characteristics under various mixed refrigerant mass charges

    Energy Technology Data Exchange (ETDEWEB)

    Rozhentsev, Andrey [Far Eastern State Transport University of the Russian Federation, Seryshev street, 47, 680021 Khabarovsk (Russian Federation)

    2008-11-15

    This paper reports the results of experimental investigation of a low-temperature Joule-Thomson refrigerating machine, working by use of a non-azeotropic mixture of refrigerants and with a single-stage hermetic compressor. The temperature, hydraulic and power performance of the machine are determined experimentally in relation to the mixed refrigerant (MR) mass charge. Variations of the MR refrigerating machine operating performance with the working mixture mass charge are found to be considerably different from the analogous performance variations of a refrigerating machine charged with a pure refrigerant. The peculiarities of those relationships are analyzed theoretically. The specific value of a minimum acceptable MR mass charge for the investigated system and its correlation with internal processes in the machine loop are established as well. If the refrigerant mixture mass charges are below the minimum ones, the temperature and power performance of the MR machine differ essentially from the design performance and such operating modes are considered inadmissible. (author)

  18. Mississippi Curriculum Framework for Machine Tool Operation/Machine Shop (Program CIP: 48.0503--Machine Shop Assistant). Secondary Programs.

    Science.gov (United States)

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for machine tool operation/machine shop I and II. Presented first are a…

  19. Machining operations using Yamaha YK 400 robot

    Science.gov (United States)

    Pop, A.; Pop, A.; Savu, D.; Dolga, V.

    2016-08-01

    This paper addresses the topic of industrial robots built for handling processes used in cutting machining applications. The study discourses the machining of a globe calotte made of komatex using a Yamaha YK 400 SCARA robot. Are presented aspects regarding the capabilities of Yamaha YK 400 robot, the development of the robot program, analyses of the proposed system and methods of improvement. A set of experimental analyses was conducted in order to identify correlations between the robot speed variation and distance between the points that describe the trajectory of the motion.

  20. AUTOMATING FACING OPERATION ON A CNC MACHINING CENTRE

    Directory of Open Access Journals (Sweden)

    S. K. SINHA

    2010-12-01

    Full Text Available Facing is usually the first and an essential process on a CNC machining centre, using a face-milling cutter, on any workpiece, because many a time, the workpiece is obtained through a “rough” casting process. The advantage of a cast part is that a workpiece with slightly oversize dimensions is made available, usuallyrequiring very little machining. This saves machining costs. However, the inherent limitation of common casting processes is inaccuracy in dimensions as well as surface roughness. Because of this reason, facing becomes the first machining operation. On a CNC milling machine, this requires a facing program written in terms of Gcodes.Since dimensions of different workpieces are likely to be different, offering different areas to be faced, the same program would not work on all workpieces. The present paper uses the latest macro-programmingtechnique, available on modern CNC machines, to develop a single program for workpieces of all dimensions.

  1. Development of an Electrically Operated Cassava Peeling and Slicing Machine

    Directory of Open Access Journals (Sweden)

    I. S. Aji

    2017-08-01

    Full Text Available The development and construction of an electrically operated cassava peeling and slicing machine was described in this paper. The objective was to design, construct and test an electrically operated machine that will peel and slice cassava root into chips, to aid the processes of drying, pelletizing and storage. The methodology adopted includes; design, construction, calculation, specification, assembly of component parts and performance test. The machine was able to Peel and slice cassava to fairly similar sizes. Performance test reveals that 7 kg of cassava tuber was peeled and chipped in one minute, which shows that, the machine developed can significantly reduce the cost of labour and time wastage associated with traditional processing of cassava tubers into dried cassava pellets, and finished products, such as; garri, and cassava flour. The machine has a capacity of 6.72 kg/min, with peeling and chipping efficiency of 66.2% and 84.0% respectively. The flesh loss of the peeled tuber was 8.52%, while overall machine efficiency obtained as 82.4%. The machine is recommended for use by small scale industries and by cassava farmers in the rural areas. It has an overall cost of N46100 ($150. The machine can easily be operated by an individual and maintained, by using warm water to wash the component parts, and sharpening of the chipping disc when required.

  2. 76 FR 174 - International Business Machines (IBM), Global Sales Operations Organization, Sales and...

    Science.gov (United States)

    2011-01-03

    ... Employment and Training Administration International Business Machines (IBM), Global Sales Operations...; International Business Machines (IBM), Global Sales Operations Organization, Sales and Distribution Business..., applicable to workers of International Business Machines (IBM), Global Sales Operations Organization,...

  3. Hyperglycemia as an Effect of Cardiopulmonary Bypass: Intra-operative Glucose Management

    OpenAIRE

    Najmaii, Samira; Redford, Daniel; Larson, Douglas F.

    2006-01-01

    Cardiopulmonary bypass (CPB) is associated with surgical stress, hypothermia, hyperoxia, enhancement of neuroendocrine outflow, and administration of glucogenic catecholamines that are associated with glucogonolysis and glucogenesis that result in hyperglycemia. The hyperglycemic state during CPB has been associated with adverse outcomes, such as infection, neurological impairment, cardiac dysfunction, prolonged hospitalization, and higher mortality rates. This report justifies vigilant monit...

  4. Improved Operating Performance of Mining Machine Picks

    Science.gov (United States)

    Prokopenko, S.; Li, A.; Kurzina, I.; Sushko, A.

    2016-08-01

    The reasons of low performance of mining machine picks are stated herein. In order to improve the wear resistance and the cutting ability of picks a new design of a cutting carbide tip insert to be fixed on a removable and rotating pick head is developed. Owing to the new design, the tool ensures a twofold increase in the cutting force maintained longer, a twofold reduction in the specific power consumption of the breaking process, and extended service life of picks and the possibility of their multiple use.

  5. Development of Cassava Grating Machine: A Dual-Operational Mode

    Directory of Open Access Journals (Sweden)

    Mohammed B. NDALIMAN

    2006-07-01

    Full Text Available Design of a Cassava grating machine which has two modes of operation was made. It can be powered either electrically or manually. It takes care of power failure problems, and can be used in rural settlements where electricity supply is not in existence. Cassava is fed with the Machine through the hopper made of metal sheet to the granting drum, which rotates at a constant speed. This process grates the cassava into cassava pulp. The chute constructed of metal sheet accepts the pulp and send it out because of its inclination which operated manually, the efficiency of the machine was found to be 92.4%, which the efficiency of the electrically powered machine was found to be 91.9%.

  6. Increased post-operative cardiopulmonary fitness in gastric bypass patients is explained by weight loss

    DEFF Research Database (Denmark)

    Lund, M. T.; Hansen, M.; Wimmelmann, C. L.

    2016-01-01

    Roux-en-Y gastric bypass (RYGB) leads to a major weight loss in obese patients. However, given that most patients remain obese after the weight loss, regular exercise should be part of a healthier lifestyle. The primary aim of this study was to investigate the cardiopulmonary fitness in obese......-perceived physical fitness increased after RYGB. Self-reported low- and high-intensity physical activity did not change. With weight loss, self-rated fitness level increased and the limitations to perform exercise decreased in RYGB patients. Nevertheless, as shown by the lower absolute VO2max, RYGB patients do...... patients before and after RYGB. Thirty-four patients had body composition and cardiopulmonary fitness (VO2max) assessed and completed questionnaires regarding physical activity and function twice before RYGB (time points A and B) and 4 and 18 months after surgery (time points C and D). Weight loss was 37...

  7. Accessible engineering drawings for visually impaired machine operators.

    Science.gov (United States)

    Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

    2014-01-01

    An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

  8. Principles of machine operation and maintenance

    CERN Document Server

    Jeffrey, Dick

    2013-01-01

    This book explains how rotating machinery works, and the role of the maintenance engineer in ensuring its proper operation. Stress is laid on the need for the trainee engineer to develop skills in diagnosis and troubleshooting as well as practicalexpertise in maintenance procedures.

  9. Hyperglycemia as an effect of cardiopulmonary bypass: intra-operative glucose management.

    Science.gov (United States)

    Najmaii, Samira; Redford, Daniel; Larson, Douglas F

    2006-06-01

    Cardiopulmonary bypass (CPB) is associated with surgical stress, hypothermia, hyperoxia, enhancement of neuroendocrine outflow, and administration of glucogenic catecholamines that are associated with glucogonolysis and glucogenesis that result in hyperglycemia. The hyperglycemic state during CPB has been associated with adverse outcomes, such as infection, neurological impairment, cardiac dysfunction, prolonged hospitalization, and higher mortality rates. This report justifies vigilant monitoring of blood glucose levels and a rational protocol for the treatment of hyperglycemia of all open heart surgical patients that may improve post-CPB surgical outcomes.

  10. WEB-BASED VIRTUAL CNC MACHINE MODELING AND OPERATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A CNC simulation system based on internet for operation training of manufacturing facility and manufacturing process simulation is proposed. Firstly, the system framework and a rapid modeling method of CNC machine tool are studied under the virtual environment based on PolyTrans and CAD software. Then, a new method is proposed to enhance and expand the interactive ability of virtual reality modeling language(VRML) by attaining communication among VRML, JavaApplet, JavaScript and Html so as to realize the virtual operation for CNC machine tool. Moreover, the algorithm of material removed simulation based on VRML Z-map is presented. The advantages of this algorithm include less memory requirement and much higher computation. Lastly, the CNC milling machine is taken as an illustrative example for the prototype development in order to validate the feasibility of the proposed approach.

  11. Shaper and Milling Machine Operation, Machine Shop Work 2: 9555.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared to assist the student in learning the basic skills and safety for shaper and milling operations. The course presents the various types of machines, work holding devices, cutting tools and feeds and speeds, and instruction designed to enable the student to obtain the manipulative skills and related knowledge…

  12. Molecular machines operating on the nanoscale: from classical to quantum

    Directory of Open Access Journals (Sweden)

    Igor Goychuk

    2016-03-01

    Full Text Available The main physical features and operating principles of isothermal nanomachines in the microworld, common to both classical and quantum machines, are reviewed. Special attention is paid to the dual, constructive role of dissipation and thermal fluctuations, the fluctuation–dissipation theorem, heat losses and free energy transduction, thermodynamic efficiency, and thermodynamic efficiency at maximum power. Several basic models are considered and discussed to highlight generic physical features. This work examines some common fallacies that continue to plague the literature. In particular, the erroneous beliefs that one should minimize friction and lower the temperature for high performance of Brownian machines, and that the thermodynamic efficiency at maximum power cannot exceed one-half are discussed. The emerging topic of anomalous molecular motors operating subdiffusively but very efficiently in the viscoelastic environment of living cells is also discussed.

  13. Simulation Modeling and Analysis of Operator-Machine Ratio

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on a simulation model of a semiconductor manufacturer, operator-machine ratio (OMR) analysis is made using work study and time study. Through sensitivity analysis, it is found that labor utilization decreases with the increase of lot size.Meanwhile, it is able to identify that the OMR for this company should be improved from 1∶3 to 1∶5. An application result shows that the proposed model can effectively improve the OMR by 33%.

  14. MONITORING DIAGNOSTIC INDICATORS DURING OPERATION OF A PRINT MACHIN

    Directory of Open Access Journals (Sweden)

    Jozef Dobránsky

    2015-11-01

    Full Text Available This article deals with monitoring diagnostic indicators during the operation of a machine used for production of packing materials with a print. It analyses low-frequency vibrations measured in individual spherical roller bearings in eight print positions. The rollers in these positions have a different pressure based on positioning these rollers in relation to the central roller. As a result, the article also deals with a correlation of pressure and level of measured low-frequency vibrations. The speed of the print machine (the speed of a line in meters per minute is a very important variable during its operation, this is why it is important to verify the values of vibrations in various speeds of the line, what can lead to revelation of one or more resonance areas. Moreover, it examines vibrations of the central roller drive and measurement of backlash of transmission cogs of this drive. Based on performed analyses recommendations for an operator of the machine have been conceived.

  15. A Low-Cost Easy-Operation Hexapod Walking Machine

    Directory of Open Access Journals (Sweden)

    Giuseppe Carbone

    2008-06-01

    Full Text Available This paper presents the mechanical design of an hybrid hexapod walking machine that has been designed and built at LARM: Laboratory of Robotics and Mechatronics in Cassino. Basic characteristics are investigated in order to design a leg system with suitable low-cost modular components. Moreover, special care has been addressed in proposing an architecture that can be easily operated by a PLC with on-off logic. Experimental tests are reported in order to show feasibility and operational capability of proposed design.

  16. Job Analysis Schedule--Offset Press Operator (Multilith 1250 W) or Offset Duplicating Machine Operator.

    Science.gov (United States)

    Feyock, Anthony J.

    This paper presents an analysis of the job performed by an offset press operator (alternate title is offset duplicating machine operator) of a Multilith 1250 W. First covered is work performed, as follows: prepares dampening unit for printing run, prepares inking unit for printing, readies printing plate for printing, sets up press for running,…

  17. Association of blood products administration during cardiopulmonary bypass and excessive post-operative bleeding in pediatric cardiac surgery.

    Science.gov (United States)

    Agarwal, Hemant S; Barrett, Sarah S; Barry, Kristen; Xu, Meng; Saville, Benjamin R; Donahue, Brian S; Harris, Zena L; Bichell, David P

    2015-03-01

    Our objectives were to study risk factors and post-operative outcomes associated with excessive post-operative bleeding in pediatric cardiac surgeries performed using cardiopulmonary bypass (CPB) support. A retrospective observational study was undertaken, and all consecutive pediatric heart surgeries over 1 year period were studied. Excessive post-operative bleeding was defined as 10 ml/kg/h of chest tube output for 1 h or 5 ml/kg/h for three consecutive hours in the first 12 h of pediatric cardiac intensive care unit (PCICU) stay. Risk factors including demographics, complexity of cardiac defect, CPB parameters, hematological studies, and post-operative morbidity and mortality were evaluated for excessive bleeding. 253 patients were studied, and 107 (42 %) met the criteria for excessive bleeding. Bayesian model averaging revealed that greater volume of blood products transfusion during CPB was significantly associated with excessive bleeding. Multiple logistic regression analysis of blood products transfusion revealed that increased volume of packed red blood cells (PRBCs) administration for CPB prime and during CPB was significantly associated with excessive bleeding (p = 0.028 and p = 0.0012, respectively). Proportional odds logistic regression revealed that excessive bleeding was associated with greater time to achieve negative fluid balance, prolonged mechanical ventilation, and duration of PCICU stay (p after adjusting for multiple parameters. A greater volume of blood products administration, especially PRBCs transfusion for CPB prime, and during the CPB period is associated with excessive post-operative bleeding. Excessive bleeding is associated with worse post-operative outcomes.

  18. Amylase:creatinine clearance ratios, serum amylase, and lipase after operations with cardiopulmonary bypass.

    Science.gov (United States)

    Smith, C R; Schwartz, S I

    1983-09-01

    Forty-two adults who underwent cardiac operations were studied prospectively for evidence of clinical or subclinical pancreatitis. Clinically detectable pancreatitis was not seen. Serum amylase and lipase levels did not change significantly following operation. The amylase:creatinine clearance ratio (ACCR) immediately following operation was abnormally elevated in 31% of the samples obtained, and the mean ACCR increased from 2.08 +/- 1.85% before operation to 6.2% +/- 6.77% (P less than 0.05). An abnormally elevated ACCR was most often associated with a low urine creatinine concentration. The mean urine creatinine level decreased significantly from 78 +/- 53 mg/dl before operation to 38 +/- 49 mg/dl immediately following operation (P less than 0.02), and 73% of the samples obtained at that time had an abnormally low urine creatinine level (P less than 0.01). The abnormalities observed in ACCR and urine creatinine could not be related to any of several variables presumed to reflect the degree of perioperative physiologic stress, nor could they be related to postoperative hemodynamic performance. It was concluded that ACCR rises following cardiac operation because of perioperative changes in renal function, and not as a reflection of subclinical pancreatic injury.

  19. Machine-Tractor Aggregates Operation Assurance by Mobile Maintenance Teams

    Science.gov (United States)

    Redreev, G. V.; Myalo, O. V.; Prokopov, S. P.; Solomkin, A. P.; Okunev, G. A.

    2017-07-01

    operability of machine-tractor aggregates (MTA) is ensured by purposeful activity of maintenance and repair performers. MTAs operation assurance can provide achievement of absolutely different goals. For further development of technical service formation concept concretization in the part of determining locations of maintenance and repair performers and their area of expertise is suggested, as well as of arising peculiarities of equipment. The theoretical task is reduced to the type of tasks of distribution of recourses or transportation tasks. Mobile maintenance teams of regional agricultural equipment manufacturers’ dealers have experience of technical service performance. The formed stream of requests from agricultural plants determines the direction of correcting of existing theoretical provisions, confirming necessity of further development of centralized method of technical service by efforts and means of manufacturers’ dealers.

  20. Efficient operation of anisotropic synchronous machines for wind energy systems

    Science.gov (United States)

    Eldeeb, Hisham; Hackf, Christoph M.; Kullick, Julian

    2016-09-01

    This paper presents an analytical solution for the Maximum-Torque-per-Ampere (MTPA) operation of synchronous machines (SM) with anisotropy and magnetic cross-coupling for the application in wind turbine systems and airborne wind energy systems. For a given reference torque, the analytical MTPA solution provides the optimal stator current references which produce the desired torque while minimizing the stator copper losses. From an implementation point of view, the proposed analytical method is appealing in terms of its fast online computation (compared to classical numerical methods) and its efficiency enhancement of the electrical drive system. The efficiency of the analytical MTPA operation, with and without consideration of cross-coupling, is compared to the conventional method with zero direct current.

  1. Neuroprotective Strategies during Cardiac Surgery with Cardiopulmonary Bypass

    Science.gov (United States)

    Salameh, Aida; Dhein, Stefan; Dähnert, Ingo; Klein, Norbert

    2016-01-01

    Aortocoronary bypass or valve surgery usually require cardiac arrest using cardioplegic solutions. Although, in principle, in a number of cases beating heart surgery (so-called off-pump technique) is possible, aortic or valve surgery or correction of congenital heart diseases mostly require cardiopulmonary arrest. During this condition, the heart-lung machine also named cardiopulmonary bypass (CPB) has to take over the circulation. It is noteworthy that the invention of a machine bypassing the heart and lungs enabled complex cardiac operations, but possible negative effects of the CPB on other organs, especially the brain, cannot be neglected. Thus, neuroprotection during CPB is still a matter of great interest. In this review, we will describe the impact of CPB on the brain and focus on pharmacological and non-pharmacological strategies to protect the brain. PMID:27879647

  2. Trainees operating on high-risk patients without cardiopulmonary bypass: a high-risk strategy?

    Science.gov (United States)

    Ascione, Raimondo; Reeves, Barnaby C; Pano, Marco; Angelini, Gianni D

    2004-07-01

    The safety of teaching off-pump coronary artery bypass grafting to trainees is best tested in high-risk patients, who are more likely to experience significant morbidity after surgery. This study compared outcomes of off-pump coronary artery bypass grafting operations performed by consultants and trainees in high-risk patients. Data for consecutive patients undergoing off-pump coronary artery bypass grafting were collected prospectively. Patients satisfying at least one of the following criteria were classified as high-risk: age older than 75 years, ejection fraction less than 0.30, myocardial infarction in the previous month, current congestive heart failure, previous cerebrovascular accident, creatinine greater than 150 micromol/L, respiratory impairment, peripheral vascular disease, previous cardiac surgery, and left main stem stenosis greater than 50%. Early morbidity, 30-day mortality, and late survival were compared. From April 1996 to December 2002, 686 high-risk patients underwent off-pump coronary artery bypass grafting revascularization. Operations by five consultants (416; 61%) and four trainees (239; 35%) were the focus of subsequent analyses. Nine visiting or research fellows performed the other 31 operations. Prognostic factors were more favorable in trainee-led operations. On average, consultants and trainees grafted the same number of vessels. There were 18 (4.3%) and 5 (1.9%) deaths within 30 days, and 14 (3.4%) and 5 (1.9%) myocardial infarctions in consultant and trainee groups, respectively. After adjusting for imbalances in prognostic factors, odd ratios for almost all adverse outcomes implied no increased risk with trainee operators, although patients operated on by trainees had longer postoperative stays and were more likely to have a red blood cell transfusion. Kaplan-Meier cumulative mortality estimates at 24-month follow-up were 10.5% (95% confidence interval, 7.7% to 14.2%) and 6.4% (95% confidence interval, 3.8% to 10.9%) in consultant

  3. Design and manufacturing of abrasive jet machine for drilling operation

    Directory of Open Access Journals (Sweden)

    Mittal Divyansh

    2016-01-01

    Full Text Available Wide application of Abrasive Jet Machine (AJM is found in machining hard and brittle materials. Machining of brittle materials by AJM is due to brittle fracture and removal of micro chips from the work piece. Embedment of the abrasive particles in the brittle materials results in decrease of machining efficiency. In this paper design and manufacturing of AJM has been presented. Various parts of AJM have been designed using ANSYS 16.2 software. The parts are then manufactured indigenously as per designed parameters. The machine fabricated in this work will be used further for process optimization of AJM parameters for machining of glass and ceramics.

  4. Cardio-pulmonary exercise testing: An objective approach to pre-operative assessment to define level of perioperative care.

    Science.gov (United States)

    Bhagwat, Milind; Paramesh, Kaggere

    2010-07-01

    Cardiopulmonary exercise testing is a non-invasive, objective method of assessing integrated response of heart, lungs and musculoskeletal system to incremental exercise. Though it has been in use for a few decades, the recent rise in its use as a preoperative test modality is reviewed. A brief account of cardiopulmonary exercise test, as it is carried out in practice and its applications, is given. The physiological basis is explained and relationship of pathophysiology of poor exercise capacity with various test variables is discussed. Its use for prediction of postoperative morbidity in various noncardiopulmonary surgical procedures is reviewed.

  5. A NEW APPROACH TO SOLVING GENERAL ANAESTHESIA INDIVIDUALIZATION PROBLEM DURING SURGICAL OPERATIONS WITH CARDIOPULMONARY BYPASS

    Directory of Open Access Journals (Sweden)

    V. M. Magilevets

    2009-01-01

    Full Text Available The computerized system to control depth of anesthesia during surgical operation was developed in our research center. The depth of anesthesia is regulated by controlled intravenous infusion of propofol. The varied propofol rate is controlled by the closed-loop propofol system (CLPS with mean arterial pressure (MAP controller. MAP is used in the CLPS as input parameter and indicator of anesthesia depth. CLPS consists PC, invasive blood pressure (BP sensor and Graseby 3400 infusion pump. The C language computer program sets the propofol infusion rate based on empirical algorithm including proportional component to maintain the measured MAP more closely to the target MAP (85% of patient standard MAP. The propofol concentrations are calculated by Runge–Kutta’s method PK/PD model differential equations solving with Marsh’s microconstants and Kazama’s BIS effect site microconstant and age depended BP effect site microconstants every 30 s. The designed CLPS was effective and useful for anesthesia maintenance during open-heart surgery, especially for early extubation. 

  6. Experimental Investigation of Machining Parameters in Drilling Operation Using Conventional and CNC Machines on Titanium Alloy

    Directory of Open Access Journals (Sweden)

    B.Suresh kumar

    2014-05-01

    Full Text Available Titanium alloy is one of the newer materials in manufacturing industries due to its high strength to weight ratio and corrosion resistance properties. Making a hole on this component is very difficult task due to its poor machinability. Hence, the machining parameter investigation on titanium alloy material is very important for predicting the drilling performance characteristics. In addition, the modern manufacturing industries are used the conventional drilling machine and CNC drilling machines for making a hole. In the sense, the main aim of this work is to investigate the machining parameters on vibration, thrust force, torque, machining time, burr dimension, tool wear and surface roughness occurrences when drilling titanium alloy with conventional and CNC machines. The effects of spindle speed and feed rate on these responses were reported.

  7. Alternative Models of Service, Centralized Machine Operations. Phase II Report. Volume II.

    Science.gov (United States)

    Technology Management Corp., Alexandria, VA.

    A study was conducted to determine if the centralization of playback machine operations for the national free library program would be feasible, economical, and desirable. An alternative model of playback machine services was constructed and compared with existing network operations considering both cost and service. The alternative model was…

  8. THE INFLUENCE SEWING MACHINE ON FOOTWEAR MOCCASIN ECONOMIC INDICATORS AI ASSEMBLY OPERATIONS

    Directory of Open Access Journals (Sweden)

    MALCOCI Marina

    2014-05-01

    Full Text Available With the evolution of time changes, grows and improves, construction, form, rationality and argumentation usefulness of various types of footwear, namely machines. In the present paper analyzes a number of sewing machines, bound for achieving moccasin shoes. With sewing machines can perform a wide variety of stitches, they create an aesthetically pleasing, but all at once enable product diversification with minimum expenses. Sewing machines moccasins are distinguished by technological parameters, number of stitches, design and affordability. Sewing operation carried out in these machines is carried out within 72 seconds to manual operation - 22 minutes. A flow diagram mechanical requires a reduced number of workers (e.g., 3 workers, to a manual flow diagram - 38 workers. Labour productivity in the use of sewing machines increase by 10 times, and operation cost decreases from 3,7 to 5,7 lei. Regardless of the sewing moccasins construction company helps to increase productivity, quality completion of the operation, ie products, reducing the time required to manufacture the products, shortening manufacturing cycle. Among the cars analyzed, the most recommended sewing machine as OS 7700 P Global company because it represents the best technical features. Sewing machines for manufacturing footwear moccasin were implemented in Moldova in 2010, at the "Cristina Mold Rom Simpex" in Chisinau. Because, company management understood beneficial role of sewing moccasins on quality operation, but also on other economic indicators. Currently the majority of footwear enterprises in Moldova sewing moccasins are done manually. One problem is the high price of sewing machines moccasins.

  9. Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

    Science.gov (United States)

    Koptev, V. Yu

    2017-02-01

    The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

  10. The Effect of Repeat Cardiopulmonary bypass on Epicardial Microflow and Graft Flow during Intra-operative Heart Failure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Objective The relationship between graft blood flow, epicardial microflow,mean arterial pressure and hemorheologic changes was studied during intraoperative heart failure.Methods These parameters were done to evaluate the use of repeated cardiopulmonary bypass supportfor the intraoperative heart failure following aorto-coronary bypass surgery. Included in this study were10 patients with a mean age of 7 0 and unstable angina undergoing coronary bypass grafting and suffer-ing from intraoperative heart failure. The epicardiai microflow, graft flow, mean arterial pressureand blood cell filterability were measured. Resluts During heart failure, the mean arterial pressurefell by 41 % ( P < 0. 01 ), graft flow by 67 % ( P < 0. 01 ) and epicardialmicro flow by 64 % ( P <0. 01 ). After 1 5 to 56 min of assisted cardiopulmonary bypass support, the epicardial mioroflow andgraft flow were partially restored, while red cell and white cell filterability was reduced by 31% and644 % respectively ( P < 0. 01 ). There were significant correlations between graft flow, epicardial mi-croflow, blooxd cell filterability and cardiopulmonary bypass time. All patients recovered and were dis-charged from the hospital. Conclusion It is concluded that the use of temporary assisted CPB sup-port to treat intrapoperative heart failure allows the recovery of the myocardium and thereby restores themean arterial pressure. The recovery of graft flow and epicardial flow occurred to a lesser extent. TheCPB support seemed to be suitable for about 60 rain probably because of increasing disturbance to theblood cell filterability, graft flow and the epicardial microcirculation.

  11. Energy-saving operation of a converter-fed synchronous machine

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, I.; Veszpremi, K. [Technical University of Budapest, Department of Electrical Machines and Drives, Budapest (Hungary)

    1997-12-31

    In the Converter-Fed Synchronous Machine (CFSM) there is no need for forced commutation the CL and CF converters operate with line commutation, the CM is commutated by the machine voltages. This drive is applied mainly for large power and high speed controlled drives. Considering the large power, the investigation of energy-saving operation is important. As in the DC and the induction motor drives the energy-saving operation is implemented by flux control. (orig.) 6 refs.

  12. Operating point resolved loss computation in electrical machines

    Directory of Open Access Journals (Sweden)

    Pfingsten Georg Von

    2016-03-01

    Full Text Available Magnetic circuits of electromagnetic energy converters, such as electrical machines, are nowadays highly utilized. This proposition is intrinsic for the magnetic as well as the electric circuit and depicts that significant enhancements of electrical machines are difficult to achieve in the absence of a detailed understanding of underlying effects. In order to improve the properties of electrical machines the accurate determination of the locally distributed iron losses based on idealized model assumptions solely is not sufficient. Other loss generating effects have to be considered and the possibility being able to distinguish between the causes of particular loss components is indispensable. Parasitic loss mechanisms additionally contributing to the total losses originating from field harmonics, non-linear material behaviour, rotational magnetizations, and detrimental effects caused by the manufacturing process or temperature, are not explicitly considered in the common iron-loss models, probably even not specifically contained in commonly used calibration factors. This paper presents a methodology being able to distinguish between different loss mechanisms and enables to individually consider particular loss mechanisms in the model of the electric machine. A sensitivity analysis of the model parameters can be performed to obtain information about which decisive loss origin for which working point has to be manipulated by the electromagnetic design or the control of the machine.

  13. Modification and Performance Evaluation of a Low Cost Electro-Mechanically Operated Creep Testing Machine

    Directory of Open Access Journals (Sweden)

    John J. MOMOH

    2010-12-01

    Full Text Available Existing mechanically operated tensile and creep testing machine was modified to a low cost, electro-mechanically operated creep testing machine capable of determining the creep properties of aluminum, lead and thermoplastic materials as a function of applied stress, time and temperature. The modification of the testing machine was necessitated by having an electro-mechanically operated creep testing machine as a demonstration model ideal for use and laboratory demonstrations, which will provide an economical means of performing standard creep experiments. The experimental result is a more comprehensive understanding of the laboratory experience, as the technology behind the creep testing machine, the test methodology and the response of materials loaded during experiment are explored. The machine provides a low cost solution for Mechanics of Materials laboratories interested in creep testing experiment and demonstration but not capable of funding the acquisition of commercially available creep testing machines. Creep curves of strain versus time on a thermoplastic material were plotted at a stress level of 1.95MPa, 3.25MPa and 4.55MPa and temperature of 20oC, 40oC and 60oC respectively. The machine is satisfactory since it is always ready for operation at any given time.

  14. Coherence-Induced Reversibility and Collective Operation of Quantum Heat Machines via Coherence Recycling

    Science.gov (United States)

    Uzdin, Raam

    2016-08-01

    Collective behavior, where a set of elements interact and generate effects that are beyond the reach of the individual noninteracting elements, is always of great interest in physics. Quantum collective effects that have no classical analog are even more intriguing. In this work, we show how to construct collective quantum heat machines and explore their performance boosts with respect to regular machines. Without interactions between the machines, the individual units operate in a stochastic, nonquantum manner. The construction of the collective machine becomes possible by introducing two simple quantum operations: coherence extraction and coherence injection. Together, these operations can harvest coherence from one engine and use it to boost the performance of a slightly different engine. For weakly driven engines, we show that the collective work output scales quadratically with the number of engines rather than linearly. Eventually, the boost saturates and then becomes linear. Nevertheless, even in saturation, work is still significantly boosted compared to individual operation. To study the reversibility of the collective machine, we introduce the "entropy-pollution" measure. It is shown that there is a regime where the collective machine is N times more reversible while producing N times more work, compared to the individual operation of N units. Moreover, the collective machine can even be more reversible than the most reversible unit in the collective. This high level of reversibility becomes possible due to a special symbiotic mechanism between engine pairs.

  15. Improvement of Machinability of Mild Steel during Turning Operation by Magnetic Cutting

    Directory of Open Access Journals (Sweden)

    Anayet U. Patwari

    2012-01-01

    Full Text Available This paper presents the details of improvement of machinability of mild steel using magnetic cutting during turning operation. Improvement of machinability was evaluated in terms of tool life, surface roughness and chip morphology. Machine tool chatter is a type of intensive self-excited vibrations of individual components of Machine-Tool-Fixture-Work (MTFW system. Chatter causes unwanted excessive vibratory motion in between the tool and the work-piece causing adverse effects on the product quality and machine-tool and tool life. In addition to the damage of the work-piece surface due to chatter marks, the occurrence of severe chatter results in many adverse effects, which include poor dimensional accuracy of the work-piece, reduction of tool life, and damage to the machine. Chatter is formed as resonance phenomena during machining because of the instability of the closed-loop system formed by machine tool structure and metal-cutting process. In this study, magnets were used to avoid the chatter formation zone and its effect on machinability was investigated. Improvements in tool life and surface finish were observed during magnetic cutting of the mild steel. An obvious change in the chip behaviour was also present. These observations further enhance the possibility of using this magnetic cutting to eliminate the chatter formation zones and hence eliminate the adverse effect of chatter on machinability.

  16. Basic Operation of Cryocoolers and Related Thermal Machines

    Science.gov (United States)

    de Waele, A. T. A. M.

    2011-09-01

    This paper deals with the basics of cryocoolers and related thermodynamic systems. The treatment is based on the first and second law of thermodynamics for inhomogeneous, open systems using enthalpy flow, entropy flow, and entropy production. Various types of machines, which use an oscillating gas flow, are discussed such as: Stirling refrigerators, GM coolers, pulse-tube refrigerators, and thermoacoustic coolers and engines. Furthermore the paper deals with Joule-Thomson and dilution refrigerators which use a constant flow of the working medium.

  17. Numerical Ergonomics Analysis in Operation Environment of CNC Machine

    Science.gov (United States)

    Wong, S. F.; Yang, Z. X.

    2010-05-01

    The performance of operator will be affected by different operation environments [1]. Moreover, poor operation environment may cause health problems of the operator [2]. Physical and psychological considerations are two main factors that will affect the performance of operator under different conditions of operation environment. In this paper, applying scientific and systematic methods find out the pivot elements in the field of physical and psychological factors. There are five main factors including light, temperature, noise, air flow and space that are analyzed. A numerical ergonomics model has been built up regarding the analysis results which can support to advance the design of operation environment. Moreover, the output of numerical ergonomic model can provide the safe, comfortable, more productive conditions for the operator.

  18. Correlation of cutting fluid performance in different machining operations

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Belluco, Walter

    2001-01-01

    An analysis of cutting fluid performance in different metal cutting operations is presented, based on experimental investigations in which type of operation, performance criteria, work material, and fluid type are considered. Cutting fluid performance was evaluated in turning, drilling, reaming...

  19. State Machine Framework And Its Use For Driving LHC Operational states

    CERN Document Server

    Misiowiec, M; Solfaroli Camilloci, M

    2011-01-01

    The LHC follows a complex operational cycle with 12 major phases that include equipment tests, preparation, beam injection, ramping and squeezing, finally followed by the physics phase. This cycle is modelled and enforced with a state machine, whereby each operational phase is represented by a state. On each transition, before entering the next state, a series of conditions is verified to make sure the LHC is ready to move on. The State Machine framework was developed to cater for building independent or embedded state machines. They safely drive between the states executing tasks bound to transitions and broadcast related information to interested parties. The framework encourages users to program their own actions. Simple configuration management allows the operators to define and maintain complex models themselves. An emphasis was also put on easy interaction with the remote state machine instances through standard communication protocols. On top of its core functionality, the framework offers a transparen...

  20. "Orpheus" cardiopulmonary bypass simulation system.

    Science.gov (United States)

    Morris, Richard W; Pybus, David A

    2007-12-01

    In this paper we describe a high-fidelity perfusion simulation system intended for use in the training and continuing education of perfusionists. The system comprises a hydraulic simulator, an electronic interface unit and a controlling computer with associated real-time computer models. It is designed for use within an actual operating theatre, or within a specialized simulation facility. The hydraulic simulator can be positioned on an operating table and physically connected to the circuit of the institutional heart-lung machine. The institutional monitoring system is used to display the arterial and central venous pressures, the ECG and the nasopharyngeal temperature using appropriate connections. The simulator is able to reproduce the full spectrum of normal and abnormal events that may present during the course of cardiopulmonary bypass. The system incorporates a sophisticated blood gas model that accurately predicts the behavior of a modern, hollow-fiber oxygenator. Output from this model is displayed in the manner of an in-line blood gas electrode and is updated every 500 msecs. The perfusionist is able to administer a wide variety of drugs during a simulation session including: vasoconstrictors (metaraminol, epinephrine and phenylephrine), a vasodilator (sodium nitroprusside), chronotropes (epinephrine and atropine), an inotrope (epinephrine) and modifiers of coagulation (heparin and protamine). Each drug has a pharmacokinetic profile based on a three-compartment model plus an effect compartment. The simulation system has potential roles in the skill training of perfusionists, the development of crisis management protocols, the certification and accreditation of perfusionists and the evaluation of new perfusion equipment and/or techniques.

  1. Investigations of Cutting Fluid Performance Using Different Machining Operations

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Belluco, Walter

    2002-01-01

    An analysis of cutting fluid performance in dif-ferent metal cutting operations is presented based on performance criteria, work material and fluid type. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping operations, with respect to tool life, cutting forces and prod...

  2. Agricultural Safety. FMO: Fundamentals of Machine Operation. Second Edition.

    Science.gov (United States)

    John Deere Co., Moline, IL.

    This manual is intended to provide students with basic information on the safe operation of farm machinery. The following topics are covered in the individual chapters: safe farm machinery operation (the importance of safety, the role of communication in safety, and types of farm accidents); human factors (human limitations and capabilities;…

  3. USE OF GENETIC ALGORITHMS TO SEQUENCE THE MACHINING OPERATIONS OF PARTS

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Genetic algorithms are used to determine the sequence of parts\\' machining operations.First, the feature operation units are encoded to a genetic string with natural digits, and the sequencing constraint knowledge is represented by the fitness functions based on four types of constraints, and then, through the implementation of the genetic operators including reproduction, crossover and mutation, a rational sequence of operations is being searched and can be found finally.Such sequence is also optimal.

  4. A Rational Deconstruction of Landin's SECD Machine with the J Operator

    DEFF Research Database (Denmark)

    Danvy, Olivier; Millikin, Kevin

    2008-01-01

    to this extension of the SECD machine, using a series of elementary transformations (transformation into continuation-passing style (CPS) and defunctionalization, chiefly) and their left inverses (transformation into direct style and refunctionalization). To this end, we modernize the SECD machine into a bisimilar...... one that operates in lockstep with the original one but that (1) does not use a data stack and (2) uses the caller-save rather than the callee-save convention for environments. We also identify that the dump component of the SECD machine is managed in a callee-save way. The caller-save counterpart...... as well as the expressive power of the CPS hierarchy (1) to account for the first control operator and the first abstract machine for functional languages and (2) to connect them to their successors. Our work also illustrates the value of Danvy and Nielsen's refocusing technique to connect environment...

  5. Development of Prediction System for Environmental Burden for Machine Tool Operation

    Science.gov (United States)

    Narita, Hirohisa; Kawamura, Hiroshi; Norihisa, Takashi; Chen, Lian-Yi; Fujimoto, Hideo; Hasebe, Takao

    Recently, some activities for environmental protection have been attempted to reduce environmental burdens in many fields. The manufacturing field also requires such reduction. Hence, a prediction system for environmental burden for machining operation is proposed based on the Life Cycle Assessment (LCA) policy for the future manufacturing system in this research. This system enables the calculation of environmental burden (equivalent CO2 emission) due to the electric consumption of machine tool components, cutting tool status, coolant quantity, lubricant oil quantity and metal chip quantity, and provides accurate information of environmental burden of the machining process by considering some activities related to machine tool operation. In this paper, the development of the prediction system is described. As a case study, two Numerical Control (NC) programs that manufacture a simple shape are evaluated to show the feasibility of the proposed system.

  6. Metrological Aspects of Surface Topographies Produced by Different Machining Operations Regarding Their Potential Functionality

    Directory of Open Access Journals (Sweden)

    Żak Krzysztof

    2017-06-01

    Full Text Available This paper presents a comprehensive methodology for measuring and characterizing the surface topographies on machined steel parts produced by precision machining operations. The performed case studies concern a wide spectrum of topographic features of surfaces with different geometrical structures but the same values of the arithmetic mean height Sa. The tested machining operations included hard turning operations performed with CBN tools, grinding operations with Al2O3 ceramic and CBN wheels and superfinish using ceramic stones. As a result, several characteristic surface textures with the Sa roughness parameter value of about 0.2 μm were thoroughly characterized and compared regarding their potential functional capabilities. Apart from the standard 2D and 3D roughness parameters, the fractal, motif and frequency parameters were taken in the consideration.

  7. Investigations of Cutting Fluid Performance Using Different Machining Operations

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Belluco, Walter

    2002-01-01

    An analysis of cutting fluid performance in dif-ferent metal cutting operations is presented based on performance criteria, work material and fluid type. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping operations, with respect to tool life, cutting forces and prod......-gated. In the case of austenitic stainless steel as the workpiece material, results using the different operations under different cutting conditions show that the performance of vegetable oil based prod-ucts is superior or equal to that of mineral oil based products. The hypothesis was investigated that one...

  8. Cardiopulmonary bypass in pregnancy

    Directory of Open Access Journals (Sweden)

    Mukul Chandra Kapoor

    2014-01-01

    Full Text Available Cardiac surgery carried out on cardiopulmonary bypass (CPB in a pregnant woman is associated with poor neonatal outcomes although maternal outcomes are similar to cardiac surgery in non-pregnant women. Most adverse maternal and fetal outcomes from cardiac surgery during pregnancy are attributed to effects of CPB. The CPB is associated with utero-placental hypoperfusion due to a number of factors, which may translate into low fetal cardiac output, hypoxia and even death. Better maternal and fetal outcomes may be achieved by early pre-operative optimization of maternal cardiovascular status, use of perioperative fetal monitoring, optimization of CPB, delivery of a viable fetus before the operation and scheduling cardiac surgery on an elective basis during the second trimester.

  9. Correlation of cutting fluid performance in different machining operations

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Belluco, Walter

    2001-01-01

    investigated. Results show that correlation of cutting fluid performance in different operations exists, within the same group of cutting fluids, in the case of stainless steel as workpiece material. Under the tested conditions, the average correlation coefficients between efficiency parameters with different...... operations on austenitic stainless steel lied in the range 0.87-0.97 for waterbased fluids and 0.79-0.89 for straight oils. A similar correlation could not be found for the other workpiece materials investigated in this work. A rationalisation of cutting fluid performance tests is suggested....

  10. Optimization of Operation Sequence in CNC Machine Tools Using Genetic Algorithm

    Science.gov (United States)

    Abu Qudeiri, Jaber; Yamamoto, Hidehiko; Ramli, Rizauddin

    The productivity of machine tools is significantly improved by using microcomputer based CAD/CAM systems for NC program generation. Currently, many commercial CAD/CAM packages that provide automatic NC programming have been developed and applied to various cutting processes. Many cutting processes machined by CNC machine tools. In this paper, we attempt to find an efficient solution approach to determine the best sequence of operations for a set of operations that located in asymmetrical locations and different levels. In order to find the best sequence of operations that achieves the shortest cutting tool travel path (CTTP), genetic algorithm is introduced. After the sequence is optimized, the G-codes that use to code for the travel time is created. CTTP can be formulated as a special case of the traveling salesman problem (TSP). The incorporation of genetic algorithm and TSP can be included in the commercial CAD/CAM packages to optimize the CTTP during automatic generation of NC programs.

  11. Prevalence of persistent neck and upper limb pain in a historical cohort of sewing machine operators.

    Science.gov (United States)

    Andersen, J H; Gaardboe, O

    1993-12-01

    Four hundred and twenty-four sewing machine operators from a historical cohort of garment industry workers answered questionnaires concerning musculoskeletal symptoms and job exposure. They were compared with 781 women from the general population of the region and an internal control group of 89 women from the garment industry. The risk for persistent neck and shoulder complaints increased with years of being a sewing machine operator: (up to seven years, eight to fifteen years, and more than fifteen years: prevalence proportion ratio 1.8, 3.5 and 4.4 [neck] and 1.5, 4 and 6.8 [shoulder] compared with the controls [n = 781]). The exposure-response relationships remained when adjusted for potential confounders, of which age, current shoulder-neck exposure, and child bearing were the most contributing. The study revealed that work for more than eight years as a sewing machine operator probably has a cumulative deleterious effect on the neck and shoulders.

  12. An extensible operating system design for large-scale parallel machines.

    Energy Technology Data Exchange (ETDEWEB)

    Riesen, Rolf E.; Ferreira, Kurt Brian

    2009-04-01

    Running untrusted user-level code inside an operating system kernel has been studied in the 1990's but has not really caught on. We believe the time has come to resurrect kernel extensions for operating systems that run on highly-parallel clusters and supercomputers. The reason is that the usage model for these machines differs significantly from a desktop machine or a server. In addition, vendors are starting to add features, such as floating-point accelerators, multicore processors, and reconfigurable compute elements. An operating system for such machines must be adaptable to the requirements of specific applications and provide abstractions to access next-generation hardware features, without sacrificing performance or scalability.

  13. [The interconnection between cytokines and the factors of bactericidal action of neutrophiles in patients operated on under the conditions of cardiopulmonary bypass].

    Science.gov (United States)

    Novitskiĭ, V V; Chumakova, S P; Shipulin, V M; Urazova, O I; Evtushenko, O M; Perevozchikova, T V; Suslova, T E; Emel'ianova, T V

    2006-01-01

    The use of cardiopulmonary bypass (CPB) is associated with the development of a system inflammatory response. The subjects of the study were 48 patients with coronary heart disease (CHD), operated on under the condition of CPB. The following parameters were measured: the content of cation proteins and active oxygen forms in neutrophiles, the digesting capacity of these cells, and the serum levels of interleukins (IL)-1beta, 1ra, -4, -6, -8, and tumor necrosis factor-alpha (TNF-alpha). The measurements were made before performing coronary bypass surgery, and also 6 and 24 hours after surgery. The results showed that the levels of cytokines and the bactericidal activity of neutrophiles were elevated in CHD patients before surgery. The changes after surgery included an increased macrophageal digesting capacity with switching to oxygen-independent mechanisms, as well as increased levels of TNF-alpha, IL-1ra, and IL-1ra:IL-1beta. The changes were more prominent 6 hours after surgery. Oxygen-dependent killing was controlled mostly by IL-6 during the pre-operative period, and by this plus TNF-alpha 24 hours after surgery. The content of cation proteins in neutrophiles before surgery correlated with the concentrations of TNF-alpha and IL-8. These interconnections weakened 6 hours after surgery and became stronger 24 hours after it.

  14. RSI in forest-machine operators in Scandinavia; Belastningsskador bland skogsmaskinfoerare i Norden

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Goeran

    1995-08-01

    Repetitive stress (or strain) injury (RSI) is a widespread complaint among forest-machine operators. The most common complaints are those afflicting the neck and shoulders as a result of muscular tension due to sustained, intensive and repetitive operation of the machine`s controls. Muscular tension leads to reduced circulation which, in turn, gives rise to chemical and physiological disorders in the muscle cells. RSI not only causes considerable personal suffering but can also be costly to the afflicted individuals, their employers and to society. Despite the substantial ergonomic improvements that have been made to forest machinery, the percentage of operators suffering from RSI has not declined. The ergonomic standard of cab design and controls on farm tractors used in forestry, however, is still very poor, although the risk of RSI on tractor drivers is offset by the fact that they work much shorter hours than the operator of forest machines. Action taken to stimulate the circulation of blood through the muscles reduces the risk of RSI among operators. However, if real and lasting progress is to be made, a comprehensive programme of technological, organizational and personal measures needs to be established. This report describes the extent, causes and consequences of RSI and also highlights some of the measures that can be taken to prevent it. Refs, 12 figs, 1 tab

  15. Creating Situational Awareness in Spacecraft Operations with the Machine Learning Approach

    Science.gov (United States)

    Li, Z.

    2016-09-01

    This paper presents a machine learning approach for the situational awareness capability in spacecraft operations. There are two types of time dependent data patterns for spacecraft datasets: the absolute time pattern (ATP) and the relative time pattern (RTP). The machine learning captures the data patterns of the satellite datasets through the data training during the normal operations, which is represented by its time dependent trend. The data monitoring compares the values of the incoming data with the predictions of machine learning algorithm, which can detect any meaningful changes to a dataset above the noise level. If the difference between the value of incoming telemetry and the machine learning prediction are larger than the threshold defined by the standard deviation of datasets, it could indicate the potential anomaly that may need special attention. The application of the machine-learning approach to the Advanced Himawari Imager (AHI) on Japanese Himawari spacecraft series is presented, which has the same configuration as the Advanced Baseline Imager (ABI) on Geostationary Environment Operational Satellite (GOES) R series. The time dependent trends generated by the data-training algorithm are in excellent agreement with the datasets. The standard deviation in the time dependent trend provides a metric for measuring the data quality, which is particularly useful in evaluating the detector quality for both AHI and ABI with multiple detectors in each channel. The machine-learning approach creates the situational awareness capability, and enables engineers to handle the huge data volume that would have been impossible with the existing approach, and it leads to significant advances to more dynamic, proactive, and autonomous spacecraft operations.

  16. The reduction methods of operator's radiation dose for portable dental X-ray machines.

    Science.gov (United States)

    Cho, Jeong-Yeon; Han, Won-Jeong

    2012-08-01

    This study was aimed to investigate the methods to reduce operator's radiation dose when taking intraoral radiographs with portable dental X-ray machines. Two kinds of portable dental X-ray machines (DX3000, Dexcowin and Rextar, Posdion) were used. Operator's radiation dose was measured with an 1,800 cc ionization chamber (RadCal Corp.) at the hand level of X-ray tubehead and at the operator's chest and waist levels with and without the backscatter shield. The operator's radiation dose at the hand level was measured with and without lead gloves and with long and short cones. The backscatter shield reduced operator's radiation dose at the hand level of X-ray tubehead to 23 - 32%, the lead gloves to 26 - 31%, and long cone to 48 - 52%. And the backscatter shield reduced operator's radiation dose at the operator's chest and waist levels to 0.1 - 37%. When portable dental X-ray systems are used, it is recommended to select X-ray machine attached with a backscatter shield and a long cone and to wear the lead gloves.

  17. The reduction methods of operator's radiation dose for portable dental X-ray machines

    Directory of Open Access Journals (Sweden)

    Jeong-Yeon Cho

    2012-08-01

    Full Text Available Objectives This study was aimed to investigate the methods to reduce operator's radiation dose when taking intraoral radiographs with portable dental X-ray machines. Materials and Methods Two kinds of portable dental X-ray machines (DX3000, Dexcowin and Rextar, Posdion were used. Operator's radiation dose was measured with an 1,800 cc ionization chamber (RadCal Corp. at the hand level of X-ray tubehead and at the operator's chest and waist levels with and without the backscatter shield. The operator's radiation dose at the hand level was measured with and without lead gloves and with long and short cones. Results The backscatter shield reduced operator's radiation dose at the hand level of X-ray tubehead to 23 - 32%, the lead gloves to 26 - 31%, and long cone to 48 - 52%. And the backscatter shield reduced operator's radiation dose at the operator's chest and waist levels to 0.1 - 37%. Conclusions When portable dental X-ray systems are used, it is recommended to select X-ray machine attached with a backscatter shield and a long cone and to wear the lead gloves.

  18. Optimization of Surface Finish in Turning Operation by Considering the Machine Tool Vibration using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Muhammad Munawar

    2012-01-01

    Full Text Available Optimization of surface roughness has been one of the primary objectives in most of the machining operations. Poor control on the desired surface roughness generates non conforming parts and results into increase in cost and loss of productivity due to rework or scrap. Surface roughness value is a result of several process variables among which machine tool condition is one of the significant variables. In this study, experimentation was carried out to investigate the effect of machine tool condition on surface roughness. Variable used to represent machine tool\\'s condition was vibration amplitude. Input parameters used, besides vibration amplitude, were feed rate and insert nose radius. Cutting speed and depth of cut were kept constant. Based on Taguchi orthogonal array, a series of experimentation was designed and performed on AISI 1040 carbon steel bar at default and induced machine tool\\'s vibration amplitudes. ANOVA (Analysis of Variance, revealed that vibration amplitude and feed rate had moderate effect on the surface roughness and insert nose radius had the highest significant effect on the surface roughness. It was also found that a machine tool with low vibration amplitude produced better surface roughness. Insert with larger nose radius produced better surface roughness at low feed rate.

  19. APPLICATION DIMENSIONAL AND SIMILARITY THEORY IN DETERMINING THE PARAMETERS AND OPERATING MODES OF SOIL CULTIVATING MACHINES

    Directory of Open Access Journals (Sweden)

    Shhirov V. N.

    2015-06-01

    Full Text Available The article presents a study of parameters and modes of operation of machines for soil cultivation. In determining the parameters and modes of operation of machinery for tillage we have applied the theory of similarity and dimensions of physical quantities. We have obtained the regularities of disclosing the relationship of the parameters from the medium to the energy characteristics of the process. As the initial data we used test protocols of machines for soil cultivation (Central - Black Earth, Kubanskaya, Sibirskaya, of North - Caucasion MIS, RosNIITiM : KPI - 3.8, AРC - 3.9, AKV - 4, AKM - 6 - V, AMP - 4 APC - 4 A, AРC - 10 APR - 4.4, APU - 6.5 APSH - 6 , CNC - 6.0, CSТ - 3.8, APC - 4. We defined the formula оf dimension parameters and modes of operation of machines for soil cultivation and properties of soil (traction resistance, depth, width, speed, hardness of the soil, acceleration. Based on dimension theory we have received similarity criteria. Based on the correlation analysis and the least squares method we determined the nature of addiction and the coefficients for it. We have also received a graph for determining the operating modes and parameters of machines for soil cultivation

  20. Energetic optimization of a piezo-based touch-operated button for man–machine interfaces

    NARCIS (Netherlands)

    Sun, Hao; Vries, de Theo J.A.; Vries, de Rene; Dalen, van Harry

    2012-01-01

    This paper discusses the optimization of a touch-operated button for man–machine interfaces based on piezoelectric energy harvesting techniques. In the mechanical button, a common piezoelectric diaphragm, is assembled to harvest the ambient energy from the source, i.e. the operator’s touch. Under to

  1. Energetic optimization of a piezo-based touch-operated button for man–machine interfaces

    NARCIS (Netherlands)

    de Vries, Theodorus J.A.; Sun, H.; de Vries, T.J.A.; de Vries, Rene; van Dalen, Harry

    2012-01-01

    This paper discusses the optimization of a touch-operated button for man–machine interfaces based on piezoelectric energy harvesting techniques. In the mechanical button, a common piezoelectric diaphragm, is assembled to harvest the ambient energy from the source, i.e. the operator’s touch. Under

  2. Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

    Science.gov (United States)

    Stanton, Michael; And Others

    1985-01-01

    Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

  3. MACHINE TOOL OPERATOR--GENERAL, ENTRY, SUGGESTED GUIDE FOR A TRAINING COURSE.

    Science.gov (United States)

    RONEY, MAURICE W.; AND OTHERS

    THE PURPOSE OF THIS CURRICULUM GUIDE IS TO ASSIST THE ADMINISTRATOR AND INSTRUCTOR IN PLANNING AND DEVELOPING MANPOWER DEVELOPMENT AND TRAINING PROGRAMS TO PREPARE MACHINE TOOL OPERATORS FOR ENTRY-LEVEL POSITIONS. THE COURSE OUTLINE PROVIDES UNITS IN -- (1) ORIENTATION, (2) BENCH WORK, (3) SHOP MATHEMATICS, (4) BLUEPRINT READING AND SKETCHING, (5)…

  4. Musculoskeletal disorders of the neck and shoulders in female sewing machine operators: prevalence, incidence, and prognosis

    DEFF Research Database (Denmark)

    Kaergaard, A.; Andersen, JH

    2000-01-01

    OBJECTIVES: To assess the occurrence and persistence of two restrictively defined neck-shoulder disorders among sewing machine operators. To assess factors associated with the development of neck-shoulder disorder and prognostic factors for remaining a case, when disorders were already present. M...

  5. Sewing machine operation : workstation adjustment, working posture, and workers’ perceptions

    NARCIS (Netherlands)

    Delleman, N.J.; Dul, J.

    2002-01-01

    At a traditional sewing machine workstation professional operators worked at ten different combined adjustments of table height, desk slope, and pedal position. Working posture and workers’ perceptions were measured. Two recommendations were formulated in order to minimize the load on the musculoske

  6. Operating Comfort Prediction Model of Human-Machine Interface Layout for Cabin Based on GEP.

    Science.gov (United States)

    Deng, Li; Wang, Guohua; Chen, Bo

    2015-01-01

    In view of the evaluation and decision-making problem of human-machine interface layout design for cabin, the operating comfort prediction model is proposed based on GEP (Gene Expression Programming), using operating comfort to evaluate layout scheme. Through joint angles to describe operating posture of upper limb, the joint angles are taken as independent variables to establish the comfort model of operating posture. Factor analysis is adopted to decrease the variable dimension; the model's input variables are reduced from 16 joint angles to 4 comfort impact factors, and the output variable is operating comfort score. The Chinese virtual human body model is built by CATIA software, which will be used to simulate and evaluate the operators' operating comfort. With 22 groups of evaluation data as training sample and validation sample, GEP algorithm is used to obtain the best fitting function between the joint angles and the operating comfort; then, operating comfort can be predicted quantitatively. The operating comfort prediction result of human-machine interface layout of driller control room shows that operating comfort prediction model based on GEP is fast and efficient, it has good prediction effect, and it can improve the design efficiency.

  7. Study of pulmonary (lung) functioning of commercial wheat grinding machine operators in India using spirometric testing.

    Science.gov (United States)

    Agashe, Abhijeet; Deshpande, V S

    2010-04-01

    In ancient times, in India each household had a chakki to mill the wheat. There was no concept of getting wheat grounded from outside. With the fast changing lifestyle, this tradition has almost disappeared now. Today every city of India has numerous commercial wheat grinding machine shops located at various places. Other than states like Punjab, this occupation is mostly unorganized and little has been done to look into the welfare and health of these machine operators. Like most of the occupations, this occupation of wheat grinding also has several occupational hazards and injuries associated with it. The most obvious of them all in this case is due to the continuous exposure of the operators to the rising dust wheat particles, commonly called atta). This perpetual inhaling ofpollutants exposes the operators to risks of pulmonary malfunctioning. Therefore, this paper attempts to determine the pulmonary functioning of the commercial wheat grinding machine operators in India using spirometric testing. On the basis of the anthropometric data, effort has been done to develop the expected lung performance. Further, the actual lung performance of the operators is measured and compared with expected performance.

  8. Control of seismic and operational vibrations of rotating machines using semi-active mounts

    Institute of Scientific and Technical Information of China (English)

    R.Rana; T.T.Soong

    2004-01-01

    A dual isolation problem for rotating machines consists of isolation of housing structures from the machine vibrations and protection of machines during an earthquake to maintain their functionality. Desirable characteristics of machine mounts for the above two purposes can differ significantly due to difference in nature of the excitation and performance criteria in the two situations. In this paper, relevant response quantities are identified that may be used to quantify performancc and simplified models of rotating machines are presented using which these relevant response quantities may be calculated. Using random vibration approach with a stationary excitation, it is shown that significant improvement in seismic performance is achievable by proper mount design. Results of shaking table experiments performed with a realistic setup using a centrifugal pump are presented. It is concluded that a solution to this dual isolation problem lies in a semi-active.mount capable of switching its properties from‘operation-optimum'to‘seismic-optimum'at the omset of a seismic event.

  9. Technology development for remote, computer-assisted operation of a continuous mining machine

    Energy Technology Data Exchange (ETDEWEB)

    Schnakenberg, G.H. [Pittsburgh Research Center, PA (United States)

    1993-12-31

    The U.S. Bureau of Mines was created to conduct research to improve the health, safety, and efficiency of the coal and metal mining industries. In 1986, the Bureau embarked on a new, major research effort to develop the technology that would enable the relocation of workers from hazardous areas to areas of relative safety. This effort is in contrast to historical efforts by the Bureau of controlling or reducing the hazardous agent or providing protection to the worker. The technologies associated with automation, robotics, and computer software and hardware systems had progressed to the point that their use to develop computer-assisted operation of mobile mining equipment appeared to be a cost-effective and accomplishable task. At the first International Symposium of Mine Mechanization and Automation, an overview of the Bureau`s computer-assisted mining program for underground coal mining was presented. The elements included providing computer-assisted tele-remote operation of continuous mining machines, haulage systems and roof bolting machines. Areas of research included sensors for machine guidance and for coal interface detection. Additionally, the research included computer hardware and software architectures which are extremely important in developing technology that is transferable to industry and is flexible enough to accommodate the variety of machines used in coal mining today. This paper provides an update of the research under the computer-assisted mining program.

  10. Limitations Of The Current State Space Modelling Approach In Multistage Machining Processes Due To Operation Variations

    Science.gov (United States)

    Abellán-Nebot, J. V.; Liu, J.; Romero, F.

    2009-11-01

    The State Space modelling approach has been recently proposed as an engineering-driven technique for part quality prediction in Multistage Machining Processes (MMP). Current State Space models incorporate fixture and datum variations in the multi-stage variation propagation, without explicitly considering common operation variations such as machine-tool thermal distortions, cutting-tool wear, cutting-tool deflections, etc. This paper shows the limitations of the current State Space model through an experimental case study where the effect of the spindle thermal expansion, cutting-tool flank wear and locator errors are introduced. The paper also discusses the extension of the current State Space model to include operation variations and its potential benefits.

  11. "Machine" consciousness and "artificial" thought: an operational architectonics model guided approach.

    Science.gov (United States)

    Fingelkurts, Andrew A; Fingelkurts, Alexander A; Neves, Carlos F H

    2012-01-05

    Instead of using low-level neurophysiology mimicking and exploratory programming methods commonly used in the machine consciousness field, the hierarchical operational architectonics (OA) framework of brain and mind functioning proposes an alternative conceptual-theoretical framework as a new direction in the area of model-driven machine (robot) consciousness engineering. The unified brain-mind theoretical OA model explicitly captures (though in an informal way) the basic essence of brain functional architecture, which indeed constitutes a theory of consciousness. The OA describes the neurophysiological basis of the phenomenal level of brain organization. In this context the problem of producing man-made "machine" consciousness and "artificial" thought is a matter of duplicating all levels of the operational architectonics hierarchy (with its inherent rules and mechanisms) found in the brain electromagnetic field. We hope that the conceptual-theoretical framework described in this paper will stimulate the interest of mathematicians and/or computer scientists to abstract and formalize principles of hierarchy of brain operations which are the building blocks for phenomenal consciousness and thought. Copyright © 2010 Elsevier B.V. All rights reserved.

  12. Neural Operant Conditioning as a Core Mechanism of Brain-Machine Interface Control

    Directory of Open Access Journals (Sweden)

    Yoshio Sakurai

    2016-08-01

    Full Text Available The process of changing the neuronal activity of the brain to acquire rewards in a broad sense is essential for utilizing brain-machine interfaces (BMIs, which is essentially operant conditioning of neuronal activity. Currently, this is also known as neural biofeedback, and it is often referred to as neurofeedback when human brain activity is targeted. In this review, we first illustrate biofeedback and operant conditioning, which are methodological background elements in neural operant conditioning. Then, we introduce research models of neural operant conditioning in animal experiments and demonstrate that it is possible to change the firing frequency and synchronous firing of local neuronal populations in a short time period. We also debate the possibility of the application of neural operant conditioning and its contribution to BMIs.

  13. 冷冻机及操作%Refrigerating Machine and Operation

    Institute of Scientific and Technical Information of China (English)

    叶常琼

    2012-01-01

    随着社会的发展、生产的扩大,为了实现更好地生产,化工操作工要熟练操作设备,并且做好设备的维护,减少生产损失,这样就可以减少检修带来的人力物力及停滞生产所带来的利润损失.在化工生产中主要有换热器、压缩机、冷冻机及泵,在此主要以冷冻机为例,介绍冷冻机的原理、组成、开车准备、操作、遇到积液的判断与处理,不断提高操作人员对冷冻机的操作,保护好设备并减少对设备的损伤.%With the development of society, the expansion of production, in order to achieve better production, chemical operators must operate equipment expertly, and do a good job on equipment maintenance to reduce the production loss, which can reduce the manpower and material resources as well as loss of profit brought about by the stagnation production. In the chemical production, it mainly has heat exchanger, compressor, refrigerating machine and pump. In this paper, taking refrigerating machine as the example, its principle, composition, preparation of driving, operation, as well as judgment and treatment when encountering hydrops were introduced, so as to constantly improve the operation of operators to refrigerating machine, protect the equipment and reduce the damage to the equipment

  14. 29 CFR 570.63 - Occupations involved in the operation of paper-products machines, scrap paper balers, and paper...

    Science.gov (United States)

    2010-07-01

    ... machines, scrap paper balers, and paper box compactors (Order 12). 570.63 Section 570.63 Labor Regulations... involved in the operation of paper-products machines, scrap paper balers, and paper box compactors (Order..., scrap paper baler, paper box compactor, or vertical slotter. (ii) Platen die-cutting press,...

  15. Multi-Response Ergonomic Evaluation of Higher Age Group CNC Machine Operators

    Directory of Open Access Journals (Sweden)

    Imtiaz Ali Khan

    2014-08-01

    Full Text Available This work contributes to research on improving performance in a human-CNC machine interface (HCMI environment. A salient contribution of this study is the use of a load cell to measure human performance. The developed novel system can measure cognitive and motor action responses simultaneously. The performance measurement system designed for this work may be used in other fields where systems are operated using control panels and for observing and evaluating the responses of mentally retarded persons (or persons with symptoms of Alzheimer‟s disease. The search time, motor action time and applied force were selected as response variables to accurately evaluate a computer numerically controlled (CNC machine operator‟s performance. Based on a Taguchi experimental design, a full factorial design consisting of 27 (33 experiments was used to collect data on human performance. The collected data were analyzed using grey relational analysis, analysis of variance (ANOVA and the F-test. ANOVA was performed using Design-Expert software. The designed research was shown to have a reasonable degree of validity via a confirmation test. This study represents an effective approach for the optimization of a higher age group operator-CNC machine interface environment with multi-performance characteristics based on a combination of the Taguchi method and grey relational analysis.

  16. Real-Time Simulation and Analysis of the Induction Machine Performances Operating at Flux Constant

    Directory of Open Access Journals (Sweden)

    Aziz Derouich

    2014-05-01

    Full Text Available In this paper, we are interested, in a first time, at the study and the implementation of a V/f control for induction machine in real time. After, We are attached to a comparison of the results by simulation and experiment for, speed responses, flux and currents of the real machine, with a DSPACE card and model established by classical identification (Direct Current test , blocked-rotor test, no-load test , synchronous test, to ensure the validity of the established model. The scalar controlled induction motor allows operation of the motor with the maximum torque by simultaneous action on the frequency and amplitude of the stator voltage, with conservation of the ratio V/f. Speed reference imposes a frequency at the inverter supplying the voltages needed to power the motor, which determines the speed of rotation. The maximum torque of the machine is proportional to the square of the supply voltage and inversely proportional to the frequency voltage. So, Keep V/f constant implies a operating with maximum constant torque. The results obtained for the rotor flux and the stator currents are especially satisfactory steady.

  17. Selected Operations, Algorithms, and Applications of n-Tape Weighted Finite-State Machines

    CERN Document Server

    Kempe, André

    2011-01-01

    A weighted finite-state machine with n tapes (n-WFSM) defines a rational relation on n strings. It is a generalization of weighted acceptors (one tape) and transducers (two tapes). After recalling some basic definitions about n-ary weighted rational relations and n-WFSMs, we summarize some central operations on these relations and machines, such as join and auto-intersection. Unfortunately, due to Post's Correspondence Problem, a fully general join or auto-intersection algorithm cannot exist. We recall a restricted algorithm for a class of n-WFSMs. Through a series of practical applications, we finally investigate the augmented descriptive power of n-WFSMs and their join, compared to classical transducers and their composition. Some applications are not feasible with the latter. The series includes: the morphological analysis of Semitic languages, the preservation of intermediate results in transducer cascades, the induction of morphological rules from corpora, the alignment of lexicon entries, the automatic ...

  18. Operator functional state classification using least-square support vector machine based recursive feature elimination technique.

    Science.gov (United States)

    Yin, Zhong; Zhang, Jianhua

    2014-01-01

    This paper proposed two psychophysiological-data-driven classification frameworks for operator functional states (OFS) assessment in safety-critical human-machine systems with stable generalization ability. The recursive feature elimination (RFE) and least square support vector machine (LSSVM) are combined and used for binary and multiclass feature selection. Besides typical binary LSSVM classifiers for two-class OFS assessment, two multiclass classifiers based on multiclass LSSVM-RFE and decision directed acyclic graph (DDAG) scheme are developed, one used for recognizing the high mental workload and fatigued state while the other for differentiating overloaded and base-line states from the normal states. Feature selection results have revealed that different dimensions of OFS can be characterized by specific set of psychophysiological features. Performance comparison studies show that reasonable high and stable classification accuracy of both classification frameworks can be achieved if the RFE procedure is properly implemented and utilized.

  19. The experience of psychological nursing of cardiopulmonary bypass heart operation during perioperative period%体外循环心脏手术围手术期的心理护理体会

    Institute of Scientific and Technical Information of China (English)

    张玉梅; 范春兰; 韩萌萌

    2015-01-01

    Objective On the psychological observation of cardiopulmonary bypass heart operation during perioperative period,forward-looking and corresponding psychological nursing,and timely treatment,prevent abnormal psychological behavior, so that patients with early rehabilitation.Methods To strengthen the systematic desensitization, cognitive behavior and corresponding psychological nursing after surgery by preoperative.Results 45 cases of operation patients without adverse events.Conclusion Psychological nursing can occur in patients with psychological behavior effectively avoid cardiopulmonary bypass heart operation in perioperative period of abnormal.%目的:对体外循环心脏手术围术期的心理观察,有前瞻性和针对性的心理护理,从而及时治疗、预防心理行为异常的发生,使患者早日康复。方法通过术前强化系统脱敏、认知行为以及术后相应心理护理。结果45例手术患者无不良事件发生。结论心理护理能有效避免体外循环心脏手术围手术期的病人心理行为异常的发生。

  20. Predictive modeling of human operator cognitive state via sparse and robust support vector machines.

    Science.gov (United States)

    Zhang, Jian-Hua; Qin, Pan-Pan; Raisch, Jörg; Wang, Ru-Bin

    2013-10-01

    The accurate prediction of the temporal variations in human operator cognitive state (HCS) is of great practical importance in many real-world safety-critical situations. However, since the relationship between the HCS and electrophysiological responses of the operator is basically unknown, complicated and uncertain, only data-based modeling method can be employed. This paper is aimed at constructing a data-driven computationally intelligent model, based on multiple psychophysiological and performance measures, to accurately estimate the HCS in the context of a safety-critical human-machine system. The advanced least squares support vector machines (LS-SVM), whose parameters are optimized by grid search and cross-validation techniques, are adopted for the purpose of predictive modeling of the HCS. The sparse and weighted LS-SVM (WLS-SVM) were proposed by Suykens et al. to overcome the deficiency of the standard LS-SVM in lacking sparseness and robustness. This paper adopted those two improved LS-SVM algorithms to model the HCS based solely on a set of physiological and operator performance data. The results showed that the sparse LS-SVM can obtain HCS models with sparseness with almost no loss of modeling accuracy, while the WLS-SVM leads to models which are robust in case of noisy training data. Both intelligent system modeling approaches are shown to be capable of capturing the temporal fluctuation trends of the HCS because of their superior generalization performance.

  1. Performance Improvement of Servo Machine Low Speed Operation Using RBFN Disturbance Observer

    DEFF Research Database (Denmark)

    Lee, Kyo-Beum; Blaabjerg, Frede

    2004-01-01

    A new scheme to estimate the moment of inertia in the servo motor drive system in very low speed is proposed in this paper. The typical speed estimation scheme in most servo system for low speed operation is sensitive to the variation of machine parameters, especially the moment of inertia....... To estimate the motor inertia value, the observer using the Radial Basis Function Networks (RBFN) is applied. The effectiveness of the proposed inertia estimation method is verified by experiments. It is concluded that the speed control performance in the low speed region is improved with the proposed...

  2. DETERMINATION OF MAIN OUTPUT PARAMETERS FOR HYDROFICATED CONSTRUCTION AND ROAD-BUILDING MACHINES AT OPERATIONAL STAGE OF THEIR LIFE CYCLE

    Directory of Open Access Journals (Sweden)

    A. N. Maximenko

    2014-01-01

    Full Text Available Usage efficiency of mechanical engineering products is determined by level of their operating capability. Expenses connected with provision of operating capability for the whole operational period exceed initial cost of the products by 6-10-fold. Moreover , while being used the expenses have a tendency to increase with reduction of output parameters that ensure product application efficiency for its intended purpose. It is necessary to take into account these changes at manufacturing stages of mechanical engineering products. Maximum efficiency can be obtained at the operational stage of the product life cycle only as a result of complex and interrelated measures during designing, manufacturing and usage of the specific product for its intended purpose with due account of its output parameter dynamics. While using the product an analysis of its output parameter dynamics will make it possible to determine maximum value of the operating capability, operational expenses and best practices for obtaining maximum profit per operating time unit.Taking hydroficated excavators of the 5th grade as an example the paper presents dynamics of main output parameters at the operational stage of their life cycle; reveals the main factor influencing on intensity of hydroficated machine operating capability reduction; substantiates an expediency of taking into account output parameter dynamics while evaluating efficiency of its usage; proposes a methodology for determination of or a pay-off time period for recoupment of expenses pertaining to machine procurement and optimum time period for operational stage, its life cycle that corresponds to obtaining maximum profit.Nowadays constant values of main output parameters (operating capability, self cost of machine-hour corresponding to the beginning of operation are to be taken into account while determining expediency of machine creation. Practically they significantly change in the process of machine operation this

  3. FARE device operational characteristics of remote controlled fuelling machine at Wolsong NPP

    Energy Technology Data Exchange (ETDEWEB)

    Namgung, I. [Korea Power Engineering Co., Taejon (Korea, Republic of); Kim, Y. B.; Lee, S. K. [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    2002-10-01

    There are 4 CANDU6 type reactors operating at Wolsong site. For fuelling operation of certain fuel channels (with flow less than 21.5 kg/s) a FARE (flow Assist Ram Extension) device is used. During the refuelling operation, two remote controlled F/Ms (Fuelling Machines) are attached to a designated fuel channel and carry out refuelling job. The upstream F/M inserts new fuel bundles into the fuel channel while the downstream F/M discharges spent fuel bundles. In order to assist fuelling operation of channels that has lower coolant flow rate, the FARE device is used instead of F/M C-ram to push the fuel bundle string. The FARE device is essentially a flow restricting element that produces enough drag force to push the fuel bundle string toward downstream F/M. Channels that require the use of FARE device for refuelling are located along the outside perimeter of reactor. This paper presents the FARE device design feature, steady state hydraulic and operational characteristics and behavior of the device when coupled with fuel bundle string during fuelling operation. The study showed that the steady state performance of Fare device meets the design objective that was confirmed by downstream F/M C-ram force to be positive.

  4. An Approach to Realizing Process Control for Underground Mining Operations of Mobile Machines.

    Directory of Open Access Journals (Sweden)

    Zhen Song

    Full Text Available The excavation and production in underground mines are complicated processes which consist of many different operations. The process of underground mining is considerably constrained by the geometry and geology of the mine. The various mining operations are normally performed in series at each working face. The delay of a single operation will lead to a domino effect, thus delay the starting time for the next process and the completion time of the entire process. This paper presents a new approach to the process control for underground mining operations, e.g. drilling, bolting, mucking. This approach can estimate the working time and its probability for each operation more efficiently and objectively by improving the existing PERT (Program Evaluation and Review Technique and CPM (Critical Path Method. If the delay of the critical operation (which is on a critical path inevitably affects the productivity of mined ore, the approach can rapidly assign mucking machines new jobs to increase this amount at a maximum level by using a new mucking algorithm under external constraints.

  5. Electromagnetic power absorption and temperature changes due to brain machine interface operation.

    Science.gov (United States)

    Ibrahim, Tamer S; Abraham, Doney; Rennaker, Robert L

    2007-05-01

    To fully understand neural function, chronic neural recordings must be made simultaneously from 10s or 100s of neurons. To accomplish this goal, several groups are developing brain machine interfaces. For these devices to be viable for chronic human use, it is likely that they will need to be operated and powered externally via a radiofrequency (RF) source. However, RF exposure can result in tissue heating and is regulated by the FDA/FCC. This paper provides an initial estimate of the amount of tissue heating and specific absorption rate (SAR) associated with the operation of a brain-machine interface (BMI). The operation of a brain machine interface was evaluated in an 18-tissue anatomically detailed human head mesh using simulations of electromagnetics and bio-heat phenomena. The simulations were conducted with a single chip, as well as with eight chips, placed on the surface of the human brain and each powered at four frequencies (13.6 MHz, 1.0 GHz, 2.4 GHz, and 5.8 GHz). The simulated chips consist of a wire antenna on a silicon chip covered by a Teflon dura patch. SAR values were calculated using the finite-difference time-domain method and used to predict peak temperature changes caused by electromagnetic absorption in the head using two-dimensional bio-heat equation. Results due to SAR alone show increased heating at higher frequencies, with a peak temperature change at 5.8 GHz of approximately 0.018 degrees C in the single-chip configuration and 0.06 degrees C in the eight-chip configuration with 10 mW of power absorption (in the human head) per chip. In addition, temperature elevations due to power dissipation in the chip(s) were studied. Results show that for the neural tissue, maximum temperature rises of 3.34 degrees C in the single-chip configuration and 7.72 degrees C in the eight-chip configuration were observed for 10 mW dissipation in each chip. Finally, the maximum power dissipation allowable in each chip before a 1.0 degrees C temperature

  6. An alternative hybrid evolutionary technique focused on allocating machines and sequencing operations

    Directory of Open Access Journals (Sweden)

    Mariano Frutos

    2016-09-01

    Full Text Available We present here a hybrid algorithm for the Flexible Job-Shop Scheduling Problem (FJSSP. This problem involves the optimal use of resources in a flexible production environment in which each operation can be carried out by more than a single machine. Our algorithm allocates, in a first step, the machines to operations and in a second stage it sequences them by integrating a Multi-Objective Evolutionary Algorithm (MOEA and a path-dependent search algorithm (Multi-Objective Simulated Annealing, which is enacted at the genetic phase of the procedure. The joint interaction of those two components yields a very efficient procedure for solving the FJSSP. An important step in the development of the algorithm was the selection of the right MOEA. Candidates were tested on problems of low, medium and high complexity. Further analyses showed the relevance of the search algorithm in the hybrid structure. Finally, comparisons with other algorithms in the literature indicate that the performance of our alternative is good.

  7. Modulated Tool-Path Chip Breaking For Depleted Uranium Machining Operations

    Energy Technology Data Exchange (ETDEWEB)

    Barkman, W. E.; Babelay Jr., E. F.; Smith, K. S.; Assaid T. S.; McFarland, J. T.; Tursky, D. A.

    2010-04-15

    Turning operations involving depleted uranium frequently generate long, stringy chips that present a hazard to both the machinist and the machine tool. While a variety of chip-breaking techniques are available, they generally depend on a mechanism that increases the bending of the chip or the introduction of a one dimensional vibration that produces an interrupted cutting pattern. Unfortunately, neither of these approaches is particularly effective when making a 'light depth-of-cut' on a contoured workpiece. The historical solution to this problem has been for the machinist to use long-handled tweezers to 'pull the chip' and try to keep it submerged in the chip pan; however, this approach is not practical for all machining operations. This paper discusses a research project involving the Y-12 National Security Complex and the University of North Carolina at Charlotte in which unique, oscillatory part programs are used to continuously create an interrupted cut that generates pre-defined, user-selectable chip lengths.

  8. Analysis of doubly-fed induction machine operating at motoring mode subjected to voltage sag

    Directory of Open Access Journals (Sweden)

    Navneet Kumar

    2016-09-01

    Full Text Available Variable Speed (VS Pumped Storage Plants (PSP equipped with large asynchronous (Doubly-Fed Induction machines are emerging now in hydropower applications. Motoring mode of operation of Doubly-Fed Induction Machine (DFIM is essential and techno-economical in this application due to: (1 its uniqueness in active power controllability, (2 bulk power handing capability with less rated power converters in rotor circuit, and (3 integrating Renewable Energy Sources (RES. This paper investigates the performance of two DFIMs at different power ratings (2.2 kW and 2 MW under voltage sag with different attribute. The test results are analyzed in terms of the peaks in torque, speed, power taken and transient currents in rotor and stator circuits. During sag, stable region for DFIM operation along with speed and stator side reactive power input control is also illustrated. The negative effects of voltage sag are briefly discussed. MATLAB simulation is validated with experimentation. The various observations during simulation and experimental analysis are also supported by the theoretical explanations.

  9. Comparison of Multiobjective Evolutionary Algorithms for Operations Scheduling under Machine Availability Constraints

    Directory of Open Access Journals (Sweden)

    M. Frutos

    2013-01-01

    Full Text Available Many of the problems that arise in production systems can be handled with multiobjective techniques. One of those problems is that of scheduling operations subject to constraints on the availability of machines and buffer capacity. In this paper we analyze different Evolutionary multiobjective Algorithms (MOEAs for this kind of problems. We consider an experimental framework in which we schedule production operations for four real world Job-Shop contexts using three algorithms, NSGAII, SPEA2, and IBEA. Using two performance indexes, Hypervolume and R2, we found that SPEA2 and IBEA are the most efficient for the tasks at hand. On the other hand IBEA seems to be a better choice of tool since it yields more solutions in the approximate Pareto frontier.

  10. Considerations for NSLS-II Synchrotron Radiation Protection When Operating Damping Wigglers at Low Machine Energy

    Energy Technology Data Exchange (ETDEWEB)

    Seletskiy, S. [Brookhaven National Lab. (BNL), Upton, NY (United States). Photon Sciences Dept.; Podobedov, B. [Brookhaven National Lab. (BNL), Upton, NY (United States). Photon Sciences Dept.

    2015-12-30

    The NSLS-II storage ring vacuum chamber, including frontends (FE) and beamlines (BL), is protected from possible damage from synchrotron radiation (SR) emitted from insertion devices (IDs) by a dedicated active interlock system (AIS). The system monitors electron beam position and angle and triggers a beam dump if the beam orbit is outside of the active interlock envelope (AIE). The AIE was calculated under the assumptions of 3 GeV beam energy and ID gaps set to their minimum operating values (i.e. “fully closed”). Recently it was proposed to perform machine studies that would ramp the stored beam energy significantly below the nominal operational value of 3 GeV. These studies may potentially include the use of NSLS-II damping wigglers (DWs) for electron beam emittance reduction and control.

  11. Investigation of Effect of Operating Parameters of A CNC Cylindrical Grinding Machine on Geometric Dimensioning and Tolerancing

    Directory of Open Access Journals (Sweden)

    Jayalakshmi

    2014-03-01

    Full Text Available Machining processes are met with dimensional and geometrical variations in a product during machining operation. The amount of variation needs to be more strictly defined for accurately machined parts. Geometric dimensioning and tolerancing (GD&T definition provides the precision required for allowing manufacturing of most economical parts. Crankshaft flange is required to be machined with higher degree of precision. If geometrical accuracies are not met the crankshaft-flywheel assembly will cause wear, unbalance and vibration, leading to poor functionality. The face of crankshaft flange is evaluated for geometric tolerances- flatness and runout. A two level three factor factorial model is designed and analyzed on Minitab 16 software to identify the most affecting machining parameter among speed, feed and depth of cut on face flatness and face runout.

  12. Study and implementation high speed operating of induced magnetization machines; Etude et mise en oeuvre de machines a aimantation induite fonctionnant a haute vitesse

    Energy Technology Data Exchange (ETDEWEB)

    Alhassoun, Y.

    2005-05-15

    Actually, electromechanical machines are characterized by their low cost and reduced maintenance. Therefore, new types of magnetic materials such as soft magnetic composites (SMC), have to be considered not only for multiple applications (small motors for automotive) for cost reduction, but also when considering other special requirements such as high speed drive (aircraft and space applications). Our report of thesis is articulated around four chapters: The first chapter show the various types of magnetic interactions used in the electromagnetic actuators. The second chapter is devoted to the modelling of the induced magnetic machines by analytical resolution of equations of the field in two dimensions. The third chapter presents the four configurations prototypes of switched reluctance machine which mix the exploitation of laminated materials and the soft magnetic powders. The fourth chapter discusses the critical conditions of this machines operating at high speed. We conclude, insisting on the efforts carried out in term of analytical modelling of the induced magnetization machines for their dimensions and exploited in this same structure, the soft magnetic composite materials. The results show the potential of soft magnetic powders when considering in particular the high frequency losses and their ability to favour the heat dissipation in this structure. (author)

  13. Incidence of MSDs and neck and back pain among logging machine operators in the southern U.S.

    Science.gov (United States)

    Lynch, S M; Smidt, M F; Merrill, P D; Sesek, R F

    2014-07-01

    There are limited data about the incidence and prevalence of musculoskeletal disorders (MSDs) among loggers in the southern U.S. despite the risk factors associated with these occupations. Risk factors are both personal (age, body mass index, etc.) and job-related (awkward postures, repetitive hand and foot movements, vibration, etc.). A survey was conducted to estimate the incidence of self-reported pain and diagnosed MSDs and to study the relationship with known risk factors. Respondents were loggers attending training and continuing education classes. Respondents were asked to identify personal attributes, machine use, awkward postures, repetitive movements, and recent incidence of pain and medical diagnoses. All were male with an average age of 44 (range of 19-67) and an average body mass index of 31.3. Most were machine operators (97%) who have worked in the logging industry for an average of 22.9 years. Most machines identified were manufactured within the past ten years (average machine age 6.7 years). For machine operators, 10.5% (16) reported an MSD diagnosis, 74.3% (113) reported at least mild back pain, and 71.7% (109) reported at least mild neck pain over the past year. Further analysis attempted to identify an association between personal attributes, machine use, posture, and pain. Risk factors related to machine use may be biased since most survey respondents had considerable choice or control in working conditions, as they were firm owners and/or supervisors.

  14. Applying Multi-Class Support Vector Machines for performance assessment of shipping operations: The case of tanker vessels

    DEFF Research Database (Denmark)

    Pagoropoulos, Aris; Møller, Anders H.; McAloone, Tim C.

    2017-01-01

    efficient operations. Positive and negative patterns of energy efficient operations were identified and verified through discussions with senior officers and technical superintendents. Based on this data, the high dimensional parameter space that describes vessel operations was first reduced by means...... of feature selection algorithms. Afterwards, a model based on Multi- Class Support Vector Machines (SVM) was constructed and the efficacy of the approach is shown through the application of a test set. The results demonstrate the importance and benefits of machine learning algorithms in driving energy...... efficiency on board, as well as the impact of power management on energy costs throughout the life cycle of the ships....

  15. Human machine interface to manually drive rhombic like vehicles in remote handling operations

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Pedro; Vale, Alberto [Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ventura, Rodrigo [Institute for Systems and Robotics, Instituto Superior Tecnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal)

    2015-07-01

    In the thermonuclear experimental reactor ITER, a vehicle named CTS is designed to transport a container with activated components inside the buildings. In nominal operations, the CTS is autonomously guided under supervision. However, in some unexpected situations, such as in rescue and recovery operations, the autonomous mode must be overridden and the CTS must be remotely guided by an operator. The CTS is a rhombic-like vehicle, with two drivable and steerable wheels along its longitudinal axis, providing omni-directional capabilities. The rhombic kinematics correspond to four control variables, which are difficult to manage in manual mode operation. This paper proposes a Human Machine Interface (HMI) to remotely guide the vehicle in manual mode. The proposed solution is implemented using a HMI with an encoder connected to a micro-controller and an analog 2-axis joystick. Experimental results were obtained comparing the proposed solution with other controller devices in different scenarios and using a software platform that simulates the kinematics and dynamics of the vehicle. (authors)

  16. Control of soft machines using actuators operated by a Braille display.

    Science.gov (United States)

    Mosadegh, Bobak; Mazzeo, Aaron D; Shepherd, Robert F; Morin, Stephen A; Gupta, Unmukt; Sani, Idin Zhalehdoust; Lai, David; Takayama, Shuichi; Whitesides, George M

    2014-01-07

    One strategy for actuating soft machines (e.g., tentacles, grippers, and simple walkers) uses pneumatic inflation of networks of small channels in an elastomeric material. Although the management of a few pneumatic inputs and valves to control pressurized gas is straightforward, the fabrication and operation of manifolds containing many (>50) independent valves is an unsolved problem. Complex pneumatic manifolds-often built for a single purpose-are not easily reconfigured to accommodate the specific inputs (i.e., multiplexing of many fluids, ranges of pressures, and changes in flow rates) required by pneumatic systems. This paper describes a pneumatic manifold comprising a computer-controlled Braille display and a micropneumatic device. The Braille display provides a compact array of 64 piezoelectric actuators that actively close and open elastomeric valves of a micropneumatic device to route pressurized gas within the manifold. The positioning and geometries of the valves and channels in the micropneumatic device dictate the functionality of the pneumatic manifold, and the use of multi-layer soft lithography permits the fabrication of networks in a wide range of configurations with many possible functions. Simply exchanging micropneumatic devices of different designs enables rapid reconfiguration of the pneumatic manifold. As a proof of principle, a pneumatic manifold controlled a soft machine containing 32 independent actuators to move a ball above a flat surface.

  17. Motor proteins and molecular motors: how to operate machines at the nanoscale.

    Science.gov (United States)

    Kolomeisky, Anatoly B

    2013-11-20

    Several classes of biological molecules that transform chemical energy into mechanical work are known as motor proteins or molecular motors. These nanometer-sized machines operate in noisy stochastic isothermal environments, strongly supporting fundamental cellular processes such as the transfer of genetic information, transport, organization and functioning. In the past two decades motor proteins have become a subject of intense research efforts, aimed at uncovering the fundamental principles and mechanisms of molecular motor dynamics. In this review, we critically discuss recent progress in experimental and theoretical studies on motor proteins. Our focus is on analyzing fundamental concepts and ideas that have been utilized to explain the non-equilibrium nature and mechanisms of molecular motors.

  18. Alternative Vibration Protecting Systems for Men-Operators of Transport Machines: Modern Level and Prospects

    Science.gov (United States)

    LEE, C.-M.; GOVERDOVSKIY, V. N.

    2002-01-01

    The up-to-date level and a few of the prospects are considered in transport biomechanical vibration protection systems. An experimental estimation of the maximum capabilities of traditional vibration protecting mechanisms (VPMs) used in driver seats is given. Some of the points of synthesis and research for the adaptive VPMs, called mechanisms of elastic links with small stiffness (ELSS-mechanisms) are presented. They contain a novel object of control: non-linear elastic elements with variable torsion “negative” stiffness (TNS). These TNS-elements help to optimize VPMs according to certain criteria and give them invariant structural and functional properties. Some experimental results are presented, and they correspond well with theoretical predictions. An approach is demonstrated for grade of quality of vibration protection of the men-operators of land unsuspended machines and pilots of helicopters.

  19. Methods, systems and apparatus for controlling third harmonic voltage when operating a multi-space machine in an overmodulation region

    Energy Technology Data Exchange (ETDEWEB)

    Perisic, Milun; Kinoshita, Michael H; Ranson, Ray M; Gallegos-Lopez, Gabriel

    2014-06-03

    Methods, system and apparatus are provided for controlling third harmonic voltages when operating a multi-phase machine in an overmodulation region. The multi-phase machine can be, for example, a five-phase machine in a vector controlled motor drive system that includes a five-phase PWM controlled inverter module that drives the five-phase machine. Techniques for overmodulating a reference voltage vector are provided. For example, when the reference voltage vector is determined to be within the overmodulation region, an angle of the reference voltage vector can be modified to generate a reference voltage overmodulation control angle, and a magnitude of the reference voltage vector can be modified, based on the reference voltage overmodulation control angle, to generate a modified magnitude of the reference voltage vector. By modifying the reference voltage vector, voltage command signals that control a five-phase inverter module can be optimized to increase output voltages generated by the five-phase inverter module.

  20. Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment.

    Science.gov (United States)

    Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S; Phoon, Sin Ye

    2016-06-07

    This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

  1. Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

    Science.gov (United States)

    Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S.; Phoon, Sin Ye

    2016-06-01

    This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

  2. Factors influencing the microbial composition of metalworking fluids and potential implications for machine operator's lung.

    Science.gov (United States)

    Murat, Jean-Benjamin; Grenouillet, Frédéric; Reboux, Gabriel; Penven, Emmanuelle; Batchili, Adam; Dalphin, Jean-Charles; Thaon, Isabelle; Millon, Laurence

    2012-01-01

    Hypersensitivity pneumonitis, also known as "machine operator's lung" (MOL), has been related to microorganisms growing in metalworking fluids (MWFs), especially Mycobacterium immunogenum. We aimed to (i) describe the microbiological contamination of MWFs and (ii) look for chemical, physical, and environmental parameters associated with variations in microbiological profiles. We microbiologically analyzed 180 MWF samples from nonautomotive plants (e.g., screw-machining or metal-cutting plants) in the Franche-Comté region in eastern France and 165 samples from three French automotive plants in which cases of MOL had been proven. Our results revealed two types of microbial biomes: the first was from the nonautomotive industry, showed predominantly Gram-negative rods (GNR), and was associated with a low risk of MOL, and the second came from the automotive industry that was affected by cases of MOL and showed predominantly Gram-positive rods (GPR). Traces of M. immunogenum were sporadically detected in the first type, while it was highly prevalent in the automotive sector, with up to 38% of samples testing positive. The use of chromium, nickel, or iron was associated with growth of Gram-negative rods; conversely, growth of Gram-positive rods was associated with the absence of these metals. Synthetic MWFs were more frequently sterile than emulsions. Vegetable oil-based emulsions were associated with GNR, while mineral ones were associated with GPR. Our results suggest that metal types and the nature of MWF play a part in MWF contamination, and this work shall be followed by further in vitro simulation experiments on the kinetics of microbial populations, focusing on the phenomena of inhibition and synergy.

  3. Prediction of Backbreak in Open-Pit Blasting Operations Using the Machine Learning Method

    Science.gov (United States)

    Khandelwal, Manoj; Monjezi, M.

    2013-03-01

    Backbreak is an undesirable phenomenon in blasting operations. It can cause instability of mine walls, falling down of machinery, improper fragmentation, reduced efficiency of drilling, etc. The existence of various effective parameters and their unknown relationships are the main reasons for inaccuracy of the empirical models. Presently, the application of new approaches such as artificial intelligence is highly recommended. In this paper, an attempt has been made to predict backbreak in blasting operations of Soungun iron mine, Iran, incorporating rock properties and blast design parameters using the support vector machine (SVM) method. To investigate the suitability of this approach, the predictions by SVM have been compared with multivariate regression analysis (MVRA). The coefficient of determination (CoD) and the mean absolute error (MAE) were taken as performance measures. It was found that the CoD between measured and predicted backbreak was 0.987 and 0.89 by SVM and MVRA, respectively, whereas the MAE was 0.29 and 1.07 by SVM and MVRA, respectively.

  4. The efficacy, safety and cost-effectiveness of intra-operative cell salvage in high-bleeding-risk cardiac surgery with cardiopulmonary bypass: a prospective randomized and controlled trial.

    Science.gov (United States)

    Xie, Yihong; Shen, Sheliang; Zhang, Jun; Wang, Wenyuan; Zheng, Jiayin

    2015-01-01

    Intra-operative cell salvage (CS) was reported to be ineffective, safe and not cost-effective in low-bleeding-risk cardiac surgery with cardiopulmonary bypass (CPB), but studies in high-bleeding-risk cardiac surgery are limited. The objective of this study is to evaluate the efficacy, safety and cost-effectiveness of intra-operative CS in high-bleeding-risk cardiac surgery with CPB. One hundred and fifty patients were randomly assigned to either with intra-operative CS group (Group CS) or without intra-operative CS group (Group C). Study endpoints were defined as perioperative allogeneic red blood cell (RBC) transfusion, perioperative impairment of blood coagulative function, postoperative adverse events and costs of transfusion-related. Both the proportion and quantity of perioperative allogeneic RBC transfusion were significantly lower in Group CS than that in Group C (p=0.0002, after surgery, the incidence of postoperative excessive bleeding, were significantly higher in Group CS than that in Group C (p=0.018, 0.042, 0.034, respectively). Cost of both allogeneic RBC transfusion and total allogeneic blood transfusion were significantly lower in Group CS than that in Group C (pbleeding-risk cardiac surgery with CPB is effective, generally safe, and cost-effective in developed countries but not in China.

  5. 体外循环心内直视手术后严重并发症的防治%Prevention and treatment of severe complications after cardiopulmonary bypass in open heart operation

    Institute of Scientific and Technical Information of China (English)

    冯永健; 何佳虹; 刘晓川; 董斌; 杨宁

    2014-01-01

    Objective:To investigate the prevention and treatment of severe complications after cardiopulmonary bypass in open heart operation. Methods:The group of 216 cases of cardiopulmonary bypass open heart surgery patients with serious complications of acute cardiac tamponade,low cardiac output syndrome and ventricular arrhythmia were retrospectively analyzed. Results:In this group,7 pa-tients died,and the mortality rate was 3. 2%. There were 25 cases of all kinds of complications,among which acute cardiac tamponade, low cardiac output syndrome and ventricular arrhythmia accounted for 72. 7 percent. Conclusion:It is crucial to have proper prevention and treatment of serious complications within 24 hours after surgery.%目的:探讨体外循环心脏直视手术后严重并发症的防治。方法:对本组216例体外循环心脏直视手术患者术后急性心包填塞,低心输出量综合征及室性心律紊乱等严重并发症进行回顾性分析。结果:本组共死亡7例,死亡率为3.2%,各种并发症25例,而上述三种并发症占72.7%。结论:术后24 h对于严重并发症的正确预防与处理是保证安全的关键所在。

  6. MERGING OPTIMALITY CONDITIONS WITH GENETIC ALGORITHM OPERATORS TO SOLVE SINGLE MACHINE TOTAL WEIGHTED TARDINESS PROBLEM

    Institute of Scientific and Technical Information of China (English)

    Ibrahim M.AL-HARKAN

    2005-01-01

    In this paper, a constrained genetic algorithm (CGA) is proposed to solve the single machine total weighted tardiness problem. The proposed CGA incorporates dominance rules for the problem under consideration into the GA operators. This incorporation should enable the proposed CGA to obtain close to optimal solutions with much less deviation and much less computational effort than the conventional GA (UGA). Several experiments were performed to compare the quality of solutions obtained by the three versions of both the CGA and the UGA with the results obtained by a dynamic programming approach. The computational results showed that the CGA was better than the UGA in both quality of solutions obtained and the CPU time needed to obtain the close to optimal solutions.The three versions of the CGA reduced the percentage deviation by 15.6%, 61.95%, and 25% respectively and obtained close to optimal solutions with 59% lower CPU time than what the three versions of the UGA demanded. The CGA performed better than the UGA in terms of quality of solutions and computational effort when the population size and the number of generations are smaller.

  7. The Body of Knowledge & Content Framework. Identifying the Important Knowledge Required for Productive Performance of a Plastics Machine Operator. Blow Molding, Extrusion, Injection Molding, Thermoforming.

    Science.gov (United States)

    Society of the Plastics Industry, Inc., Washington, DC.

    Designed to guide training and curriculum development to prepare machine operators for the national certification exam, this publication identifies the important knowledge required for productive performance by a plastics machine operator. Introductory material discusses the rationale for a national standard, uses of the Body of Knowledge,…

  8. Influence of Chatter of VMC Arising During End Milling Operation and Cutting Conditions on Quality of Machined Surface

    Directory of Open Access Journals (Sweden)

    A.K.M.N. Amin, M.A. Rizal, and M. Razman

    2012-08-01

    Full Text Available Machine tool chatter is a dynamic instability of the cutting process. Chatter results in poor part surface finish, damaged cutting tool, and an irritating and unacceptable noise. Exten¬sive research has been undertaken to study the mechanisms of chatter formation. Efforts have been also made to prevent the occurrence of chatter vibration. Even though some progress have been made, fundamental studies on the mechanics of metal cutting are necessary to achieve chatter free operation of CNC machine tools to maintain their smooth operating cycle. The same is also true for Vertical Machining Centres (VMC, which operate at high cutting speeds and are capable of offering high metal removal rates. The present work deals with the effect of work materials, cutting conditions and diameter of end mill cutters on the frequency-amplitude characteristics of chatter and on machined surface roughness. Vibration data were recorded using an experimental rig consisting of KISTLER 3-component dynamometer model 9257B, amplifier, scope meters and a PC.  Three different types of vibrations were observed. The first type was a low frequency vibration, associated with the interrupted nature of end mill operation. The second type of vibration was associated with the instability of the chip formation process and the third type was due to chatter. The frequency of the last type remained practically unchanged over a wide range of cutting speed.  It was further observed that chip-tool contact processes had considerable effect on the roughness of the machined surface.Key Words: Chatter, Cutting Conditions, Stable Cutting, Surface Roughness.

  9. Prognostic value of time-related changes of cardiopulmonary exercise testing indices in stable chronic heart failure: a pragmatic and operative scheme.

    Science.gov (United States)

    Corrà, Ugo; Mezzani, Alessandro; Bosimini, Enzo; Giannuzzi, Pantaleo

    2006-04-01

    Although peak oxygen consumption (VO2) is an objective measurement of functional capacity linked to survival, most clinicians use clinical history to monitor changes over time of functional disability. The aim was to verify the prognostic value of time-related changes (Delta) of symptom-limited cardiopulmonary exercise testing (CPX) indices in stable chronic heart failure (CHF). We studied 231 stable CHF patients (200 men) with left ventricular ejection fraction (LVEF) of 24 +/- 8% and peak VO2 of 14.3 +/- 8 ml/kg per min, who performed two symptom-limited CPX over time. The two incremental CPX were separated by a mean interval of 258 +/- 42 days; 59 (26%) suffered cardiovascular death or underwent urgent heart transplantation during the follow-up (1167 +/- 562 days). Peak VO2, LVEF (measured at second evaluation), Deltapeak VO2 and DeltaNYHA (New York Heart Association classification) were selected as independent predictors in the total population, and LVEF, Deltapeak VO2, and NYHA in patients with peak VO2 of 14 ml/kg per min or less (106 patients); no Delta parameter was selected in patients with preserved exercise tolerance. Survival analysis was performed taking into consideration the inter-test variability of peak VO2 (6%): true fall: more than 6% decrease, decline within the measurement variability; less than 6% decrease, improvement within the measurement variability; less than 6% increase and true rise; more than 6% increase: total mortality rate was 51, 23, 19 and 14% (P < 0.0001), respectively. Deltapeak VO2 is a useful outcome index; a combination of static (single) and time-related functional variables can enhance the prognostication process in stable CHF patients.

  10. Emergent cardiopulmonary bypass during pectus excavatum repair

    Directory of Open Access Journals (Sweden)

    Ryan Craner

    2013-01-01

    Full Text Available Pectus excavatum is a chest wall deformity that produces significant cardiopulmonary disability and is typically seen in younger patients. Minimally invasive repair of pectus excavatum or Nuss procedure has become a widely accepted technique for adult and pediatric patients. Although it is carried out through a thoracoscopic approach, the procedure is associated with a number of potential intraoperative and post-operative complications. We present a case of cardiac perforation requiring emergent cardiopulmonary bypass in a 29-year-old male with Marfan syndrome and previous mitral valve repair undergoing a Nuss procedure for pectus excavatum. This case illustrates the importance of vigilance and preparation by the surgeons, anesthesia providers as well as the institution to be prepared with resources to handle the possible complications. This includes available cardiac surgical backup, perfusionist support and adequate blood product availability.

  11. On the operation of machines powered by quantum non-thermal baths

    Science.gov (United States)

    Niedenzu, Wolfgang; Gelbwaser-Klimovsky, David; Kofman, Abraham G.; Kurizki, Gershon

    2016-08-01

    Diverse models of engines energised by quantum-coherent, hence non-thermal, baths allow the engine efficiency to transgress the standard thermodynamic Carnot bound. These transgressions call for an elucidation of the underlying mechanisms. Here we show that non-thermal baths may impart not only heat, but also mechanical work to a machine. The Carnot bound is inapplicable to such a hybrid machine. Intriguingly, it may exhibit dual action, concurrently as engine and refrigerator, with up to 100% efficiency. We conclude that even though a machine powered by a quantum bath may exhibit an unconventional performance, it still abides by the traditional principles of thermodynamics.

  12. Combining discrepancy analysis with sensorless signal resampling for condition monitoring of rotating machines under fluctuating operations

    CSIR Research Space (South Africa)

    Heyns, T

    2012-12-01

    Full Text Available for extensive datasets that are representative of different machine fault conditions. The envelope of the filtered signal is referred to as a discrepancy transform, since the discrepancy signal indicates the presence of fault-induced signal distortions...

  13. PARAMETER DETERMINATION FOR ADDITIONAL OPERATING FORCE MECHANISM IN DEVICE FOR PNEUMO-CENTRIFUGAL MACHINING OF BALL-SHAPED WORKPIECES

    Directory of Open Access Journals (Sweden)

    A. A. Sukhotsky

    2014-01-01

    Full Text Available The paper describes development of the methodology for optimization of parameters for an additional operating force mechanism in a device for pneumo-centrifugal machining of glass balls. Specific feature in manufacturing glass balls for micro-optics in accordance with technological process for obtaining ball-shaped workpieces is grinding and polishing of spherical surface in a free state. In this case component billets of future balls are made in the form of cubes and the billets are given preliminary a form of ball with the help of rough grinding. An advanced method for obtaining ball-shaped work-pieces from brittle materials is a pneumocentrifugal machining. This method presupposes an application of two conic rings with abrasive working surfaces which are set coaxially with large diameters to each other and the billets are rolled along these rings. Rotation of the billets is conveyed by means of pressure medium.The present devices for pneumo-centrifugal machining are suitable for obtaining balls up to 6 mm. Machining of the work-pieces with full spherical surfaces and large diameter is non-productive due to impossibility to ensure a sufficient force on the billet in the working zone. For this reason the paper proposes a modified device where an additional force on the machined billet is created by upper working disc that is making a reciprocating motion along an axis of abrasive conic rings. The motion is realized with the help of a cylindrical camshaft mechanism in the form of a ring with a profile working end face and the purpose of present paper is to optimize parameters of the proposed device.The paper presents expressions for calculation of constitutive parameters of the additional operating force mechanism including parameters of loading element motion, main dimensions of the additional operating force mechanism and parameters of a profile element in the additional operating force mechanism.Investigation method is a mathematical

  14. Development of a finite state machine for the automates operation of the LLRF control at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, A.

    2007-07-15

    The entry of digital signal processors in modern control systems not only allows for extended diagnostics compared to analog systems but also for sophisticated and tricky extensions of the control algorithms. With modern DSP- and FPGA-technology, the processing speed of digital systems is no longer inferior to analog systems in many applications. A higher degree of digitalization leads to an increased complexity of the systems and hence to higher requirements on their operators. The focus of research and development in the field of high frequency control has changed in the last few years and moved towards the direction of software development and complexity management. In the presented thesis, a frame for an automation concept of modern high frequency control systems is developed. The developed automation is based on the concept of finite state machines (FSM), which is established in industry for years. A flexible framework was developed, in which procedures communicate using standardized interfaces and can be exchanged easily. With that, the developer of high frequency control components as well as the operator on shift shall be empowered to improve and adapt the automation to changed conditions without special programming skills required. Along the automation concept a number of algorithms addressing various problems were developed which satisfy the needs of modern high frequency control systems. Among the developed and successfully tested algorithms are the calibration of incident and reflected wave of resonators without antennas, the fast adaptive compensation of repetitive errors, the robust estimation of the phase advance in the control loop and the latency adjustment for the rejection of instabilities caused by passband modes. During the development of the resonator theory, high value was set on the usability of the equation in algorithms for high frequency control. The usage of the common nomenclature of control theory emphasizes the underlying mathematical

  15. Methods, systems and apparatus for controlling operation of two alternating current (AC) machines

    Science.gov (United States)

    Gallegos-Lopez, Gabriel; Nagashima, James M.; Perisic, Milun; Hiti, Silva

    2012-02-14

    A system is provided for controlling two AC machines. The system comprises a DC input voltage source that provides a DC input voltage, a voltage boost command control module (VBCCM), a five-phase PWM inverter module coupled to the two AC machines, and a boost converter coupled to the inverter module and the DC input voltage source. The boost converter is designed to supply a new DC input voltage to the inverter module having a value that is greater than or equal to a value of the DC input voltage. The VBCCM generates a boost command signal (BCS) based on modulation indexes from the two AC machines. The BCS controls the boost converter such that the boost converter generates the new DC input voltage in response to the BCS. When the two AC machines require additional voltage that exceeds the DC input voltage required to meet a combined target mechanical power required by the two AC machines, the BCS controls the boost converter to drive the new DC input voltage generated by the boost converter to a value greater than the DC input voltage.

  16. [Serum immune complexes and cardiopulmonary bypass. A review of thirty-four cases (author's transl)].

    Science.gov (United States)

    Herreman, G; Poisson-Lespassailles, C; Puech, H; Vanetti, A; Delaunay, L; Yvart, J; Fermé, I

    1982-05-20

    The immunologic status of patients undergoing cardiopulmonary bypass as investigated. Rheumatoid factor, cryoglobulinemia and serum immune complexes were looked for. Studies were performed before the operation and eight or fifteen days later. From the results, it is concluded that the immunologic changes that occur in the immediate postoperative period cannot be interpreted because of the profound modifications resulting from cardiopulmonary bypass.

  17. Assessment of functional state and adaptation reserves of machine operators in agriculture with different work experience in the profession

    Directory of Open Access Journals (Sweden)

    S.S. Raikin

    2015-09-01

    Full Text Available The results of hemodynamic parameters’ evaluation (blood pressure, heart rate, minute volume of blood, total peripheral vascular resistance and adaptation (adaptive capacity of the circulatory system, the index of physical condition, body mass index to job strains in machine operators of agriculture with a different experience in the profession are presented. It was found that 27 % of the patients – machine operators were in a state of unsatisfactory adaptation and 18.8 % in the state of failure of adaptation options when functional body reserves were sharply reduced, indicating that the work in hazardous conditions resulted in a significant deterioration of the functional state of exhaustion and adaptation reserves. It was found that the professional experience of 10 years or more is a risk factor for the health of machine workers in agriculture, causing the violation of functional state and exhaustion of adaptive reserves of an organism, as evidenced by a statistically significant correlation between the indicators of functional status and work experience in the profession.

  18. Influence of Voltage Dips on the Operation of Brushless Exciter System of Synchronous Machines

    Science.gov (United States)

    Fedotov, A.; Leonov, A.; Vagapov, G.; Mutule, A.

    2016-06-01

    This paper presents a mathematical model with continuous variables for brushless exciter system of synchronous machines, containing the thyristor elements. Discrete Laplace transform is used for transition from a mathematical model of a system with variable structure in continuous variables to equation finite difference with permanent structure. Then inverse transition is made to a mathematical model in continuous variables with permanent structure.

  19. Machine Shop. Module 4: Power Saw and Drill Press Operation. Instructor's Guide.

    Science.gov (United States)

    Walden, Charles H.; Daniel, Bill

    This document consists of materials for a six-unit course on the following topics: (1) power saw safety and maintenance; (2) cutting stock to length; (3) band machining and contouring; (4) drill press types and safety; (5) drill press work-holding devices; and (6) tools and tool holders. The instructor's guide begins with a list of competencies…

  20. A Machine-Learning Approach to Predict Main Energy Consumption under Realistic Operational Conditions

    DEFF Research Database (Denmark)

    Petersen, Joan P; Winther, Ole; Jacobsen, Daniel J

    2012-01-01

    The paper presents a novel and publicly available set of high-quality sensory data collected from a ferry over a period of two months and overviews exixting machine-learning methods for the prediction of main propulsion efficiency. Neural networks are applied on both real-time and predictive...

  1. A Machine-Learning Approach to Predict Main Energy Consumption under Realistic Operational Conditions

    DEFF Research Database (Denmark)

    Petersen, Joan P; Winther, Ole; Jacobsen, Daniel J

    2012-01-01

    The paper presents a novel and publicly available set of high-quality sensory data collected from a ferry over a period of two months and overviews exixting machine-learning methods for the prediction of main propulsion efficiency. Neural networks are applied on both real-time and predictive sett...

  2. Development of Estimating Equation of Machine Operational Skill by Utilizing Eye Movement Measurement and Analysis of Stress and Fatigue

    Directory of Open Access Journals (Sweden)

    Satoshi Suzuki

    2013-01-01

    Full Text Available For an establishment of a skill evaluation method for human support systems, development of an estimating equation of the machine operational skill is presented. Factors of the eye movement such as frequency, velocity, and moving distance of saccade were computed using the developed eye gaze measurement system, and the eye movement features were determined from these factors. The estimating equation was derived through an outlier test (to eliminate nonstandard data and a principal component analysis (to find dominant components. Using a cooperative carrying task (cc-task simulator, the eye movement and operational data of the machine operators were recorded, and effectiveness of the derived estimating equation was investigated. As a result, it was confirmed that the estimating equation was effective strongly against actual simple skill levels (r=0.56–0.84. In addition, effects of internal condition such as fatigue and stress on the estimating equation were analyzed. Using heart rate (HR and coefficient of variation of R-R interval (Cvrri. Correlation analysis between these biosignal indexes and the estimating equation of operational skill found that the equation reflected effects of stress and fatigue, although the equation could estimate the skill level adequately.

  3. Measurement-induced operation of two-ion quantum heat machines

    Science.gov (United States)

    Chand, Suman; Biswas, Asoka

    2017-03-01

    We show how one can implement a quantum heat machine by using two interacting trapped ions, in presence of a thermal bath. The electronic states of the ions act like a working substance, while the vibrational mode is modelled as the cold bath. The heat exchange with the cold bath is mimicked by the projective measurement of the electronic states. We show how such measurement in a suitable basis can lead to either a quantum heat engine or a refrigerator, which undergoes a quantum Otto cycle. The local magnetic field is adiabatically changed during the heat cycle. The performance of the heat machine depends upon the interaction strength between the ions, the magnetic fields, and the measurement cost. In our model, the coupling to the hot and the cold baths is never switched off in an alternative fashion during the heat cycle, unlike other existing proposals of quantum heat engines. This makes our proposal experimentally realizable using current tapped-ion technology.

  4. Optimal use of human and machine resources for Space Station assembly operations

    Science.gov (United States)

    Parrish, Joseph C.

    1988-01-01

    This paper investigates the issues involved in determining the best mix of human and machine resources for assembly of the Space Station. It presents the current Station assembly sequence, along with descriptions of the available assembly resources. A number of methodologies for optimizing the human/machine tradeoff problem have been developed, but the Space Station assembly offers some unique issues that have not yet been addressed. These include a strong constraint on available EVA time for early flights and a phased deployment of assembly resources over time. A methodology for incorporating the previously developed decision methods to the special case of the Space Station is presented. This methodology emphasizes an application of multiple qualitative and quantitative techniques, including simulation and decision analysis, for producing an objective, robust solution to the tradeoff problem.

  5. Identification and non-integer order modelling of synchronous machines operating as generator

    Directory of Open Access Journals (Sweden)

    Szymon Racewicz

    2012-09-01

    Full Text Available This paper presents an original mathematical model of a synchronous generator using derivatives of fractional order. In contrast to classical models composed of a large number of R-L ladders, it comprises half-order impedances, which enable the accurate description of the electromagnetic induction phenomena in a wide frequency range, while minimizing the order and number of model parameters. The proposed model takes into account the skin eff ect in damper cage bars, the eff ects of eddy currents in rotor solid parts, and the saturation of the machine magnetic circuit. The half-order transfer functions used for modelling these phenomena were verifi ed by simulation of ferromagnetic sheet impedance using the fi nite elements method. The analysed machine’s parameters were identified on the basis of SSFR (StandStill Frequency Response characteristics measured on a gradually magnetised synchronous machine.

  6. The Synthesis of Precise Rotating Machine Mathematical Model, Operating Natural Signals and Virtual Data

    Science.gov (United States)

    Zhilenkov, A. A.; Kapitonov, A. A.

    2017-07-01

    It is known that synchronous machines catalogue data are presented for the case of two-phase machine in rotating coordinate system, e.g. for their description with Park-Gorev’s equation system. Nevertheless, many problems require control of phase currents and voltages, for instance, in modeling of the systems, in which synchronous generators supply powerful rectifiers. Modeling of complex systems with synchronous generators, semiconductor convertors and etc. (with phase currents control necessary for power switch commutation algorithms) becomes achievable with the equation system described in this article. Given model can be used in digital control systems with internal model. It doesn’t require high capacity of computing resources and provides sufficient modeling accuracy.

  7. Extracorporeal cardiopulmonary resuscitation

    Directory of Open Access Journals (Sweden)

    Steven A. Conrad

    2016-04-01

    Full Text Available ECPR is defined as the rapidly-deployed application of venoarterial extracorporeal membrane oxygenation, in patients with cardiac arrest, during cardiopulmonary resuscitation before the return of ROSC. ECPR is one of the most rapidly growing segments of ECLS, and is becoming more widespread. Consideration for institution of ECPR is given to patients with witnessed arrest, good quality CPR instituted within 5 min of arrest, in whom ROSC does not occur within 15 min, and who can complete cannulation within 30–60 min. Patients from both inpatient and out-of-hospital settings are candidates if they meet these criteria. Deep hypothermic cardiac arrest, such as cold-water drowning, should receive consideration for ECPR even after considerable duration of arrest. Available outcome data are based on retrospective observation studies, some with propensity matching, and suggests a higher chance for survival with ECPR. Published outcomes from ECPR, however, are difficult to interpret, since many centers classify their use of ECLS after ROSC, in addition to ECLS before ROSC, as ECPR. Both children and adults are candidates for ECPR, but the experience in children is weighted heavily toward those with a diagnosis of cardiac disease and arrest occurring within closely monitored units.

  8. Influence of Voltage Dips on the Operation of Brushless Exciter System of Synchronous Machines

    Directory of Open Access Journals (Sweden)

    Fedotov A.

    2016-06-01

    Full Text Available This paper presents a mathematical model with continuous variables for brushless exciter system of synchronous machines, containing the thyristor elements. Discrete Laplace transform is used for transition from a mathematical model of a system with variable structure in continuous variables to equation finite difference with permanent structure. Then inverse transition is made to a mathematical model in continuous variables with permanent structure.

  9. Executable Architecture of Net Enabled Operations: State Machine of Federated Nodes

    Science.gov (United States)

    2009-11-01

    améliorations. Il est ressorti d’un des ateliers sur le développement d’une machine à états de nœuds fédérés une question importante et c’est la...processus serait plus facile à comprendre s’il était possible de présenter un ou deux modèles durant l’atelier. Les participants de cet atelier ont

  10. Volitional enhancement of firing synchrony and oscillation by neuronal operant conditioning: interaction with neurorehabilitation and brain-machine interface

    Directory of Open Access Journals (Sweden)

    Yoshio eSakurai

    2014-02-01

    Full Text Available In this review, we focus on neuronal operant conditioning in which increments in neuronal activities are directly rewarded without behaviors. We discuss the potential of this approach to elucidate neuronal plasticity for enhancing specific brain functions and its interaction with the progress in neurorehabilitation and brain–machine interfaces. The key to-be-conditioned activities that this paper emphasizes are synchronous and oscillatory firings of multiple neurons that reflect activities of cell assemblies. First, we introduce certain well-known studies on neuronal operant conditioning in which conditioned enhancements of neuronal firing were reported in animals and humans. These studies demonstrated the feasibility of volitional control over neuronal activity. Second, we refer to the recent studies on operant conditioning of synchrony and oscillation of neuronal activities. In particular, we introduce a recent study showing volitional enhancement of oscillatory activity in monkey motor cortex and our study showing selective enhancement of firing synchrony of neighboring neurons in rat hippocampus. Third, we discuss the reasons for emphasizing firing synchrony and oscillation in neuronal operant conditioning, the main reason being that they reflect the activities of cell assemblies, which have been suggested to be basic neuronal codes representing information in the brain. Finally, we discuss the interaction of neuronal operant conditioning with neurorehabilitation and brain–machine interface (BMI. We argue that synchrony and oscillation of neuronal firing are the key activities required for developing both reliable neurorehabilitation and high-performance BMI. Further, we conclude that research of neuronal operant conditioning, neurorehabilitation, BMI, and system neuroscience will produce findings applicable to these interrelated fields, and neuronal synchrony and oscillation can be a common important bridge among all of them.

  11. Towards intelligent environments: an augmented reality-brain-machine interface operated with a see-through head-mount display

    Directory of Open Access Journals (Sweden)

    Kouji eTakano

    2011-04-01

    Full Text Available The brain-machine interface (BMI or brain-computer interface (BCI is a new interface technology that uses neurophysiological signals from the brain to control external machines or computers. This technology is expected to support daily activities, especially for persons with disabilities. To expand the range of activities enabled by this type of interface, here, we added augmented reality (AR to a P300-based BMI. In this new system, we used a see-through head-mount display (HMD to create control panels with flicker visual stimuli to support the user in areas close to controllable devices. When the attached camera detects an AR marker, the position and orientation of the marker are calculated, and the control panel for the pre-assigned appliance is created by the AR system and superimposed on the HMD. The participants were required to control system-compatible devices, and they successfully operated them without significant training. Online performance with the HMD was not different from that using an LCD monitor. Posterior and lateral (right or left channel selections contributed to operation of the AR-BMI with both the HMD and LCD monitor. Our results indicate that AR-BMI systems operated with a see-through HMD may be useful in building advanced intelligent environments.

  12. Cardiopulmonary exercise testing in the evaluation of high risk patients with lung cancer

    Institute of Scientific and Technical Information of China (English)

    MAO You-sheng; WANG Yong-gang; HUANG Jin-feng; HE Jie; YAN Shao-ping; Dong Jing-si; CHENG Gui-yu; SUN Ke-lin; LIU Xiang-yang; FANG De-kang; LI Jian

    2010-01-01

    Background It is still unclear whether pulmonary function tests (PFTs) are sufficient for predicting perioperative risk,and whether all patients or only a subset of them need a cardiopulmonary exercise test (CPET) for further assessment.Thus, this study was designed to evaluate the CPET and compare the results of CPET and conventional PFTs to identify which parameters are more reliable and valuable in predicting perioperative risks for high risk patients with lung cancer.Methods From January 2005 to August 2008, 297 consecutive lung cancer patients underwent conventional PFTs (spirometry + single-breath carbon monoxide diffusing capacity of the lungs (DLCOsb) for diffusion capacity) and CPET preoperatively. The correlation of postoperative cardiopulmonary complications with the parameters of PFT and CPET was retrospectively analyzed using the chi-square test, independent sample t test and binary Logistic regression analysis.Results Of the 297 patients, 78 did not receive operation due to advanced disease stage or poor cardiopulmonary function. The remaining 219 underwent different modes of operations. Twenty-one cases were excluded from this study due to exploration alone (15 cases) and operation-related complications (6 cases). Thus, 198 cases were eligible for evaluation. Fifty of the 198 patients (25.2%) had postoperative cardiopulmonary complications. Three patients (1.5%)died of complications within 30 postoperative days. The patients were stratified into groups based on VO2max/pred respectively. The rate of postoperative cardiopulmonary complications was significantly higher in the group with cardiopulmonary complications were significantly correlated with age, comorbidities, and poor PFT and CPET results.used to stratify the patients' cardiopulmonary function status and to predict the risk of postoperative cardiopulmonary predicting perioperative risk. If available, cardiopulmonary exercise testing is strongly suggested for high-risk lung cancer patients in

  13. Numerical investigation of refrigeration machine compressor operation considering single-phase electric motor dynamic characteristics

    Science.gov (United States)

    Baidak, Y.; Smyk, V.

    2017-08-01

    Using as the base the differential equations system which was presented in relative units for generalized electric motor of hermetic refrigeration compressor, mathematical model of the software for dynamic performance calculation of refrigeration machine compressors drive low-power asynchronous motors was developed. Performed on its ground calculations of the basic model of two-phase electric motor drive of hermetic compressor and the proposed newly developed model of the motor with single-phase stator winding, which is an alternative to the industrial motor winding, have confirmed the benefits of the motor with innovative stator winding over the base engine. Given calculations of the dynamic characteristics of compressor drive motor have permitted to determine the value of electromagnetic torque swinging for coordinating compressor and motor mechanical characteristics, and for taking them into consideration in choosing compressor elements construction materials. Developed and used in the process of investigation of refrigeration compressor drive asynchronous single-phase motor mathematical and software can be considered as an element of computer-aided design system for design of the aggregate of refrigeration compression unit refrigerating machine.

  14. The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining

    Directory of Open Access Journals (Sweden)

    Ali Akbar LotfiNeyestanak

    2013-01-01

    Full Text Available Shape memory alloys are a kind of active materials, which have significant characteristics in comparison with other alloys. Since these materials are applicable in different fields such as aerospace, automobile industry, medicine, and dentistry, the effects of wire electrodischarge machining on the properties of these alloys have been studied. In this paper, changes in the shape recovery ability and microhardness of the machined surface of Nitonol-60 shape memory alloy have been studied considering recasting and formation of resolidificated layer on the shape memory alloy surface. XRD and EDXA analyses of the surface layer of the sample besides a microscopic study of the shape memory alloy layer by SEM and a study of the changes in mechanical properties of the surface layer were done by performing microhardness and tension tests on the work piece surface. Considering the surface layer, reversible strain has been studied according to the shape recovery percentage of Nitinol-60 shape memory alloy. Results show that the surface layer formed on the surface of the samples has caused changes in both physical and mechanical properties of the cut surface because of the penetration of the separated materials in comparison with deeper layers of the piece.

  15. The modelling of dynamic chemical state of paper machine unit operations; Dynaamisen kemiallisen tilan mallintaminen paperikoneen yksikkoeoperaatioissa - MPKT 04

    Energy Technology Data Exchange (ETDEWEB)

    Ylen, J.P.; Jutila, P. [Helsinki Univ. of Technology, Otaniemi (Finland)

    1998-12-31

    The chemical state of paper mass is considered to be a key factor to the smooth operation of the paper machine. There are simulators that have been developed either for dynamic energy and mass balances or for static chemical phenomena, but the combination of these is not a straight forward task. Control Engineering Laboratory of Helsinki University of Technology has studied the paper machine wet end phenomena with the emphasis on pH-modelling. VTT (Technical Research Centre of Finland) Process Physics has used thermodynamical modelling successfully in e.g. Bleaching processes. In this research the different approaches are combined in order to get reliable dynamical models and modelling procedures for various unit operations. A flexible pilot process will be constructed and different materials will be processed starting from simple inorganic substances (e.g. Calcium carbonate and distilled water) working towards more complex masses (thick pulp with process waters and various reagents). The pilot process is well instrumented with ion selective electrodes, total calcium analysator and all basic measurements. (orig.)

  16. Professional risk of developing diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production

    Directory of Open Access Journals (Sweden)

    G.A. Bezrukova

    2015-09-01

    Full Text Available Based on the results of the hygienic assessment of working conditions in the domestic agricultural machinery of old and new models when performing the main types of seasonal agricultural work during the annual production cycle and analysis of accumulated occupational diseases’ nosology structure in agricultural workers of the Saratov region over the period from 2004 to 2014, the estimation of professional risk diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production is given. Professional risk assessment carried out under the procedure set forth in P2.2.1766-03 has shown that the category of a priori risk to their health during an annual production cycle ranged from high to very high (unbearable. It was revealed that the most important factors shaping the harmful working conditions when working on agricultural machinery that can act as a trigger in the formation of vertebral diseases of the peripheral nervous system, are general and local vibration, adverse micro-climatic conditions, long uncomfortable static working posture and physical stress. The risk of diseases in the peripheral uneven system in machine operators of agriculture was attributed to the high risk category with an index of professional diseases (IPD equal to 0,5 %.

  17. Effects of payment method on work control, work risk and work-related musculoskeletal health among sewing machine operators

    Directory of Open Access Journals (Sweden)

    R. Nawawi

    2015-12-01

    Full Text Available Effects of payment method on work control, work risk and work-related musculoskeletal health among sewing machine operators R. Nawawi1, B.M. Deros1*, D.D.I. Daruis2, A. Ramli3, R.M. Zein4 and L.H. Joseph3 1Dept. of Mechanical and Materials Engineering Faculty of Engineering & Built Environment Universiti Kebangsaan Malaysia, Malaysia *Email: hjbaba@ukm.edu.my 2Faculty of Engineering, Universiti Pertahanan Nasional Malaysia, Malaysia 3Department of Physiotherapy Faculty of Science, Lincoln University College, Malaysia 4Department of Consultation, Research & Development, National Institute of Occupational Safety and Health (NIOSH, Malaysia ABSTRACT This study aimed to identify payment method and its effects on work control, work risk and work-related musculoskeletal health among Malaysian sewing machine operators. The study sample comprised 337 sewing machine operators (male, n=122, female, n=215; aged between 18-54 years old; mean 30.74±8.44 from four different garment-making companies in Malaysia. They were being paid via time rate wages (n=246 and piece rate wages (n=91. Data was collected through Nordic Musculoskeletal Questionnaire and pen-and-paper assessment via Rapid Upper Limb Assessment (RULA. From the study, the piece rate wage group was found to take fewer breaks, had high work production demands, worked at a faster pace and experienced more exhaustion and pressure due to increasing work demands as compared to the time rate group. They were also observed working with higher physical exposure such as repetitive tasks, awkward static postures, awkward grips and hand movements, pulling, lifting and pushing as compared to those in the time rate wage group. The final RULA scores was also higher from the piece rate wage group (72.53% RULA score 7 which indicated higher work risks among them. The study found that the type of wage payment was significantly associated with work risks (p=0.036, df=1 and WRMSD at the shoulder, lower back

  18. Long term reliability and machine operation diagnosis with fiber optic sensors at large turbine generators

    Science.gov (United States)

    Bosselmann, T.; Strack, S.; Villnow, M.; Weidner, J. R.; Willsch, M.

    2013-05-01

    The increasing quantity of renewable energy in electric power generation leads to a higher flexibility in the operation of conventional power plants. The turbo generator has to face the influence of frequent start-stop-operation on thermal movement and vibration of the stator end windings. Large indirect cooled turbo generators have been equipped with FBG strain and temperature sensors to monitor the influence of peak load operation. Fiber optic accelerometers measure the vibration of the end windings at several turbine generators since many years of operation. The long term reliability of fiber optic vibration, temperature and strain sensors has been successfully proved during years of online operation. The analysis of these data in correlation to significant operation parameter lead to important diagnostic information.

  19. Predictive Models of Work-Related Musculoskeletal Disorders (WMSDs Among Sewing Machine Operators in the Garments Industry

    Directory of Open Access Journals (Sweden)

    Carlos Ignacio P. Lugay

    2015-02-01

    Full Text Available The Philippine garments industry has been a driving force in the country’s economy, with apparel manufacturing firms catering to the local and global markets and providing employment opportunities for skilled Filipinos. Tight competition from neighboring Asian countries however, has made the industry’s situation difficult to flourish, especially in the wake of the Association of Southeast Asian Nations (ASEAN 2015 Integration. To assist the industry, this research examined one of the more common problems among sewing machine operators, termed as Work-related Musculoskeletal Disorders (WMSDs. These disorders are reflective in the frequency and severity of the pain experienced by the sewers while accomplishing their tasks. The causes of these disorders were identified and were correlated with the frequency and severity of pain in various body areas of the operator. To forecast pain from WMSDs among the operators, mathematical models were developed to predict the combined frequency and severity of the pain from WMSDs. Loss time or “unofficial breaktimes” due to pain from WMSDs was likewise forecasted to determine its effects on the firm’s production capacity. Both these predictive models were developed in order to assist garment companies in anticipating better the effects of WMSDs and loss time in their operations. Moreover, ergonomic interventions were suggested to minimize pain from WMSDs, with the expectation of increased productivity of the operators and improved quality of their outputs.

  20. Asymptomatic cardiopulmonary changes caused by adenoid hypertrophy.

    Science.gov (United States)

    Abdel-Aziz, Mosaad

    2011-07-01

    Adenoid hypertrophy is the most common cause of pediatric upper airway obstruction, and it can lead to cardiopulmonary complications such as pulmonary hypertension, cor pulmonale, and even heart failure. The aim of this study was to detect the asymptomatic cardiopulmonary changes that could happen in children with adenoid hypertrophy.Eighty children with adenoid hypertrophy were included in this study. Chest x-ray was used to assess the cardiothoracic ratio, whereas echocardiography was used for measuring the pulmonary arterial pressures, right ventricular diastolic filling parameters, and right ventricular end-diastolic diameters. All patients underwent adenoidectomy with or without tonsillectomy, and they were subjected again to echocardiographic assessment 6 months after the operation. No patient showed an increase in the cardiothoracic ratio on x-ray. Preoperative echocardiography showed an increase in pulmonary artery pressure (22.7 [SD, 3.8] mm Hg), a decrease in right ventricular diastolic filling parameters (E/A = 1.03 [SD, 0.17]), and an increase in right ventricular end-diastolic diameters (1.89 [SD, 0.19] cm). Postoperatively, pulmonary artery pressure decreased to 17.2 [SD, 2.1] mm Hg, right ventricular diastolic filling (E/A) increased to 1.25 [SD, 0.11], and right ventricular end-diastolic diameters decreased to 1.68 [SD, 0.12] cm. The comparison between preoperative and postoperative results for each individual parameter was statistically significant. Clinically asymptomatic cardiopulmonary changes due to adenoid hypertrophy are not rare. Early diagnosis and treatment of upper airway obstruction can prevent these serious complications. Echocardiographic examination should be recommended for these patients as a part of preoperative preparation to avoid anesthetic complications.

  1. Cardiac arrest - cardiopulmonary resuscitation

    Institute of Scientific and Technical Information of China (English)

    Basri Lenjani; Besnik Elshani; Nehat Baftiu; Kelmend Pallaska; Kadir Hyseni; Njazi Gashi; Nexhbedin Karemani; Ilaz Bunjaku; Taxhidin Zaimi; Arianit Jakupi

    2014-01-01

    Objective:To investigate application of cardiopulmonary resuscitation(CPR) measures within the golden minutes inEurope.Methods:The material was taken from theUniversityClinical Center ofKosovo -EmergencyCentre inPristina, during the two(2) year period(2010-2011).The collected date belong to the patients with cardiac arrest have been recorded in the patients' log book protocol at the emergency clinic.Results:During the2010 to2011 in the emergency center of theCUCK inPristina have been treated a total of269 patients with cardiac arrest, of whom159 or59.1% have been treated in2010, and110 patients or40.9% in2011.Of the269 patients treated in the emergency centre,93 or34.6% have exited lethally in the emergency centre, and176 or 65.4% have been transferred to other clinics.In the total number of patients with cardiac arrest, males have dominated with186 cases, or69.1%.The average age of patients included in the survey was56.7 year oldSD±16.0 years.Of the269 patients with cardiac arrest, defibrillation has been applied for93 or34.6% of patients.In the outpatient settings defibrillation has been applied for3 or3.2% of patients.Patients were defibrillated with application of one to four shocks. Of27 cases with who have survived cardiac arrest, none of them have suffered cardiac arrest at home,3 or11.1% of them have suffered cardiac arrest on the street, and24 or88.9% of them have suffered cardiac arrest in the hospital.5 out of27 patients survived have ended with neurological impairment.Cardiac arrest cases were present during all days of the week, but frequently most reported cases have been onMonday with32.0% of cases, and onFriday with24.5% of cases. Conclusions:All survivors from cardiac arrest have received appropriate medical assistance within10 min from attack, which implies that if cardiac arrest occurs near an institution health care(with an opportunity to provide the emergent health care) the rate of survival is higher.

  2. The Designed Operation of the Machine Control System on HL-2A Tokamak

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.

  3. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    production. In Kafka: Toward a Minor Literature, Deleuze and Guatari gave the most comprehensive explanation to the abstract machine in the work of art. Like the war-machines of Virilio, the Kafka-machine operates in three gears or speeds. Furthermore, the machine is connected to spatial diagrams...

  4. Quantify work load and muscle functional activation patterns in neck-shoulder muscles of female sewing machine operators using surface electromyogram.

    Science.gov (United States)

    Zhang, Fei-Ruo; He, Li-Hua; Wu, Shan-Shan; Li, Jing-Yun; Ye, Kang-Pin; Wang, Sheng

    2011-11-01

    Work-related musculoskeletal disorders (WMSDs) have high prevalence in sewing machine operators employed in the garment industry. Long work duration, sustained low level work and precise hand work are the main risk factors of neck-shoulder disorders for sewing machine operators. Surface electromyogram (sEMG) offers a valuable tool to determine muscle activity (internal exposure) and quantify muscular load (external exposure). During sustained and/or repetitive muscle contractions, typical changes of muscle fatigue in sEMG, as an increase in amplitude or a decrease as a shift in spectrum towards lower frequencies, can be observed. In this paper, we measured and quantified the muscle load and muscular activity patterns of neck-shoulder muscles in female sewing machine operators during sustained sewing machine operating tasks using sEMG. A total of 18 healthy women sewing machine operators volunteered to participate in this study. Before their daily sewing machine operating task, we measured the maximal voluntary contractions (MVC) and 20%MVC of bilateral cervical erector spinae (CES) and upper trapezius (UT) respectively, then the sEMG signals of bilateral UT and CES were monitored and recorded continuously during 200 minutes of sustained sewing machine operating simultaneously which equals to 20 time windows with 10 minutes as one time window. After 200 minutes' work, we retest 20%MVC of four neck-shoulder muscles and recorded the sEMG signals. Linear analysis, including amplitude probability distribution frequency (APDF), amplitude analysis parameters such as roof mean square (RMS) and spectrum analysis parameter as median frequency (MF), were used to calculate and indicate muscle load and muscular activity of bilateral CES and UT. During 200 minutes of sewing machine operating, the median load for the left cervical erector spinae (LCES), right cervical erector spinae (RCES), left upper trapezius (LUT) and right upper trapezius (RUT) were 6.78%MVE, 6.94%MVE, 6

  5. The Machine within the Machine

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Although Virtual Machines are widespread across CERN, you probably won't have heard of them unless you work for an experiment. Virtual machines - known as VMs - allow you to create a separate machine within your own, allowing you to run Linux on your Mac, or Windows on your Linux - whatever combination you need.   Using a CERN Virtual Machine, a Linux analysis software runs on a Macbook. When it comes to LHC data, one of the primary issues collaborations face is the diversity of computing environments among collaborators spread across the world. What if an institute cannot run the analysis software because they use different operating systems? "That's where the CernVM project comes in," says Gerardo Ganis, PH-SFT staff member and leader of the CernVM project. "We were able to respond to experimentalists' concerns by providing a virtual machine package that could be used to run experiment software. This way, no matter what hardware they have ...

  6. 29 CFR 570.62 - Occupations involved in the operation of bakery machines (Order 11).

    Science.gov (United States)

    2010-07-01

    ... as prohibited by § 570.61(a)(4). (2) This section shall not apply to the operation of pizza-dough... exception does not apply to the setting up, adjusting, repairing, oiling or cleaning of such...

  7. A novel approach to predict surface roughness in machining operations using fuzzy set theory

    Directory of Open Access Journals (Sweden)

    Tzu-Liang (Bill Tseng

    2016-01-01

    Full Text Available The increase of consumer needs for quality metal cutting related products with more precise tolerances and better product surface roughness has driven the metal cutting industry to continuously improve quality control of metal cutting processes. In this paper, two different approaches are discussed. First, design of experiments (DOE is used to determine the significant factors and then fuzzy logic approach is presented for the prediction of surface roughness. The data used for the training and checking the fuzzy logic performance is derived from the experiments conducted on a CNC milling machine. In order to obtain better surface roughness, the proper sets of cutting parameters are determined before the process takes place. The factors considered for DOE in the experiment were the depth of cut, feed rate per tooth, cutting speed, tool nose radius, the use of cutting fluid and the three components of the cutting force. Finally the significant factors were used as input factors for fuzzy logic mechanism and surface roughness is predicted with empirical formula developed. Test results show good agreement between the actual process output and the predicted surface roughness.

  8. A Brain-Machine Interface Operating with a Real-Time Spiking Neural Network Control Algorithm.

    Science.gov (United States)

    Dethier, Julie; Nuyujukian, Paul; Eliasmith, Chris; Stewart, Terry; Elassaad, Shauki A; Shenoy, Krishna V; Boahen, Kwabena

    2011-01-01

    Motor prostheses aim to restore function to disabled patients. Despite compelling proof of concept systems, barriers to clinical translation remain. One challenge is to develop a low-power, fully-implantable system that dissipates only minimal power so as not to damage tissue. To this end, we implemented a Kalman-filter based decoder via a spiking neural network (SNN) and tested it in brain-machine interface (BMI) experiments with a rhesus monkey. The Kalman filter was trained to predict the arm's velocity and mapped on to the SNN using the Neural Engineering Framework (NEF). A 2,000-neuron embedded Matlab SNN implementation runs in real-time and its closed-loop performance is quite comparable to that of the standard Kalman filter. The success of this closed-loop decoder holds promise for hardware SNN implementations of statistical signal processing algorithms on neuromorphic chips, which may offer power savings necessary to overcome a major obstacle to the successful clinical translation of neural motor prostheses.

  9. Photosystem II and terminal respiratory oxidases: molecular machines operating in opposite directions.

    Science.gov (United States)

    Siletsky, Sergey A; Borisov, Vitaliy B; Mamedov, Mahir D

    2017-03-01

    In the thylakoid membrane of green plants, cyanobacteria and algae, photosystem II (PSII) uses light energy to split water and generate molecular oxygen. In the opposite process of the biochemical transformation of dioxygen, in heterotrophs, the terminal respiratory oxidases (TRO) are at the end of the respiratory chain in mitochondria and in plasma membrane of many aerobic bacteria reducing dioxygen back to water. Despite the different sources of free energy (light or oxidation of the substrates), energy conversion by these enzymes is based on the spatial organization of enzymatic reactions in which the conversion of water to dioxygen (and vice versa) involves the transfer of protons and electrons in opposite directions across the membrane, which is accompanied by generation of proton-motive force. Similar and distinctive features in structure and function of these important energy-converting molecular machines are described. Information about many fascinating parallels between the mechanisms of TRO and PSII could be used in the artificial light-driven water-splitting process and elucidation of energy conversion mechanism in protein pumps.

  10. A cost prediction model for machine operation in multi-field production systems

    Directory of Open Access Journals (Sweden)

    Alessandro Sopegno

    Full Text Available ABSTRACT Capacity planning in agricultural field operations needs to give consideration to the operational system design which involves the selection and dimensioning of production components, such as machinery and equipment. Capacity planning models currently onstream are generally based on average norm data and not on specific farm data which may vary from year to year. In this paper a model is presented for predicting the cost of in-field and transport operations for multiple-field and multiple-crop production systems. A case study from a real production system is presented in order to demonstrate the model’s functionalities and its sensitivity to parameters known to be somewhat imprecise. It was shown that the proposed model can provide operation cost predictions for complex cropping systems where labor and machinery are shared between the various operations which can be individually formulated for each individual crop. By so doing, the model can be used as a decision support system at the strategic level of management of agricultural production systems and specifically for the mid-term design process of systems in terms of labor/machinery and crop selection conforming to the criterion of profitability.

  11. Effect of insulin on prognosis of patients with stress hyperglycemia after cardiac operation with cardiopulmonary bypass%胰岛素对体外循环心脏术后应激性高血糖患者的疗效

    Institute of Scientific and Technical Information of China (English)

    李颖; 许卫江; 刘彬

    2011-01-01

    目的:观察胰岛素控制血糖对心脏术启发生应激性高血糖患者预后的疗效.方法:选择80例体外循环心脏术后发生应激性高血糖的非糖尿病患者,随机分为A组(40例)和B组(40例),给予胰岛素静脉泵入,每2h监测1次血糖,A组控制血糖:8.4~11.1mmol/L,B组控制血糖:4.4~8.3mmol/L,每日记录急性生理功能和慢性健康状况评分系统(APACHE)Ⅲ评分及相关监测指标.结果:与A组比较,B组呼吸功能不全(25.0%比7.5%),肾功能不全(12.5%比2.5%)、中枢神经功能不全(15.0%比5.0%)、院内感染率(62.5%比20.0%)、死亡率(10.0%比2.5%)明显降低(P均<0.05),较之A组,B组APACHEⅢ评分自术后第1d起均明显降低(P均<0.05);住ICU时间[(11.3±8.9)d比(6.6±3.7)d]、使用呼吸机时间[(412±3.2)h比(18.5±4.5) h]明显减少(P均<0.05).结论:胰岛素控制体外循环心脏手术后危重患者血糖在4.4~8.3mmol/L水平,可保护脏器功能,减少院内感染,降低死亡率,改善预后.%Objective: To observe effect of control blood glucose with insulin on prognosis of patients with stress hyperglycemia after cardiac operation with cardiopulmonary bypass (CPB). Methods: A total of 80 patients without diabetes mellitus, who occurred stress hyperglycemia after cardiac operation with CPB, were randomly divided into A group (n=40) and B group (n -40). All patients received insulin using venous pump, and blood glucose was measured every two hours. Level of blood glucose of A group was maintained in 8. 4-11. 1 mmol/L and B group in 4. 4~ 8. 3 mmol/L. Scores of acute physiology and chronic health evaluation (APACHE) 1 and relative indicators were recorded. Results: Compared with A group, there were significant decrease in rates of respiratory dysfunction (25.0% vs. 7.5%), renal dysfunction (12.5% vs. 2.5%), central nerval dysfunction (15.0% vs. 5.0%), nosoco-mial infections (62. 5% vs. 20. 0%) and mortality (10. 0% vs. 2. 5%) , P<0. 05 all

  12. To investigate the influence of machine operating variables on formulations derived from lactose types in capsule filling: part 2.

    Science.gov (United States)

    Moolchandani, Vikas; Augsburger, Larry L; Gupta, Abhay; Khan, Mansoor A; Langridge, John; Hoag, Stephen W

    2016-01-01

    This study is the second in a series that examines the characterizing and selection of suitable grades of lactose for capsule formulation development. Based upon the previous study, four grades were selected for further study. The effects of drug load and operational variables on formulations derived from these four lactose types were evaluated for physicochemical and mechanical attributes of plugs and their capsules on an instrumented dosing-disc capsule filling machine (H&H KFM/3) using acetaminophen as a model, highly soluble and poorly compressible drug. The results obtained were as follows: (1) flowability reduced upon increasing drug load; (2) powder bed height (PBH) and compression force (CF) had positive significant effect on plug weight (p < 0.05); (3) ejection force was positively and significantly correlated with increasing speed and CF (p < 0.05); (4) AL capsule plugs had the highest plug crushing force which was followed by DCL15; (5) the crushing strength of plugs made from DCL11 increased with increasing acetaminophen concentration; (6) higher CF had a significant negative impact on acetaminophen release at 15 min time point (p < 0.05); (7) at 10% and 40% drug load, formulations containing AL showed the quickest drug release; and (8) increased drug load had a significant negative impact on the release rate at 15 and 45 min time points (p < 0.05). Overall, the results from this study provides information on risk based assessment of filler selection based on drug load and the range of machine operating variables which will help in defining criteria for meeting key quality attributes for capsule formulation development.

  13. How To Teach Common Characteristics of Machine Tools

    Science.gov (United States)

    Kazanas, H. C.

    1970-01-01

    Organizes machine tools and machine operations into commonalities in order to help the student visualize and distinguish the common characteristics which exist between machine tools and operations. (GR)

  14. Cardiopulmonary effects following endoscopic thoracic sympathectomy for primary hyperhidrosis.

    Science.gov (United States)

    Cruz, Jorge M; Fonseca, Manuel; Pinto, Fausto J; Oliveira, Antonio G; Carvalho, L Silva

    2009-09-01

    Endoscopic thoracic sympathectomy (ETS) is performed for the treatment of primary hyperhidrosis (PH). The second and third sympathetic thoracic ganglions excised in ETS also innervate the heart and lung. In the present work we studied the cardiopulmonary effects of ETS in a group of patients with PH. We performed a prospective study in 38 patients with severe PH. Pulmonary function, echocardiographic assessment of left ventricular function and myocardial contractility and maximal, symptom-limited, incremental exercise tests were evaluated 2 weeks before, and 6 months after ETS. Data were analysed with the paired t-test. Differences were considered significant when p<0.05. In pulmonary function tests, we found a statistically significant decrease forced expiratory flow in small airways and an increase of residual volume, a significant decrease in heart rate and ejection fraction, a significant decrease of 'rest' and 'peak' heart rate, and a significant increase of oxygen pulse (O2 pulse) and oxygen peak uptake (VO2 peak) after ETS (p<0.05). These cardiopulmonary effects observed 6 months after ETS in the treatment of patients with PH are all in normal ranges and are not relevant in cardiopulmonary function. We concluded that ETS in patients with PH is a safe procedure. Patients must be informed about these cardiopulmonary effects before the operation.

  15. Women, Men, and Machines.

    Science.gov (United States)

    Form, William; McMillen, David Byron

    1983-01-01

    Data from the first national study of technological change show that proportionately more women than men operate machines, are more exposed to machines that have alienating effects, and suffer more from the negative effects of technological change. (Author/SSH)

  16. 浅谈柔印机的实际操作%The actual operation of flexible printing machine

    Institute of Scientific and Technical Information of China (English)

    余艳群

    2013-01-01

    目前包装印刷工业正向着高品质、精细、多元化方向发展,但是在胶印和凹印所占比例较大,而柔印在我国起步较晚,不过随着新技术的不断应用,独特优越的柔性版印刷已经取得了很大的进步,并具有强劲的市场竞争潜力。针对柔印机的实际操作问题,笔者参考有关从业人员的生产笔记,浏览行业资讯,并结合自身的生产实践,分析了链条的清洗以及润滑,卷筒纸柔印机纸带的控制,油墨的ph值和黏度的调整,压力的调节及张力控制等诸多具体问题,列举了多种解决问题的思路方法和经验技巧。%At present, packaging and printing industry is a high quality, fine, the direction of diversification, but in the offset and gravure printing accounted for a large proportion, and the conference starts late in our country. However, with the continuous application of new technologies, the unique advantages of flexible printing has made great progress, and has strong market potential. In order to solve the problem of the actual operation of flexo printing machine, I refer to the employees in the production notes, browse the information industry, and combining with production practice, the analysis of the chain, the cleaning and lubrication, control web flexo printing machine paper, ink pH value and viscosity of the adjustment, the regulation of the pressure and tension control, many specific issues narrow flexo printing machine die cutting station, lists a variety of ideas to solve the problem method and skills.

  17. Operation of a quantum dot in the finite-state machine mode: Single-electron dynamic memory

    Energy Technology Data Exchange (ETDEWEB)

    Klymenko, M. V. [Department of Chemistry, University of Liège, B4000 Liège (Belgium); Klein, M. [The Fritz Haber Center for Molecular Dynamics and the Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 91904 (Israel); Levine, R. D. [The Fritz Haber Center for Molecular Dynamics and the Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 91904 (Israel); Crump Institute for Molecular Imaging and Department of Molecular and Medical Pharmacology, David Geffen School of Medicine and Department of Chemistry and Biochemistry, University of California, Los Angeles, California 90095 (United States); Remacle, F., E-mail: fremacle@ulg.ac.be [Department of Chemistry, University of Liège, B4000 Liège (Belgium); The Fritz Haber Center for Molecular Dynamics and the Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 91904 (Israel)

    2016-07-14

    A single electron dynamic memory is designed based on the non-equilibrium dynamics of charge states in electrostatically defined metallic quantum dots. Using the orthodox theory for computing the transfer rates and a master equation, we model the dynamical response of devices consisting of a charge sensor coupled to either a single and or a double quantum dot subjected to a pulsed gate voltage. We show that transition rates between charge states in metallic quantum dots are characterized by an asymmetry that can be controlled by the gate voltage. This effect is more pronounced when the switching between charge states corresponds to a Markovian process involving electron transport through a chain of several quantum dots. By simulating the dynamics of electron transport we demonstrate that the quantum box operates as a finite-state machine that can be addressed by choosing suitable shapes and switching rates of the gate pulses. We further show that writing times in the ns range and retention memory times six orders of magnitude longer, in the ms range, can be achieved on the double quantum dot system using experimentally feasible parameters, thereby demonstrating that the device can operate as a dynamic single electron memory.

  18. Machine Protection at the LHC – Experience of Three Years Running and Outlook for Operation at Nominal Energy

    CERN Document Server

    Wollmann, D; Wenninger, J; Zerlauth, M

    2013-01-01

    With more than 22 fb-1 integrated luminosity delivered to the experiments ATLAS and CMS, the LHC surpassed the results of 2011 by more than a factor 5. This was achieved at 4 TeV, with intensities of ~2e14 p per beam. The uncontrolled loss of only a small fraction of the stored beam is sufficient to damage parts of the superconducting magnet system, accelerator equipment or the particle physics experiments. To protect against such losses, a correct functioning of the complex LHC machine protection (MP) systems through the operational cycle is essential. Operating with up to 140 MJ stored beam energy was only possible due to the experience and confidence gained in the two previous running periods, where the intensity was slowly increased. In this paper the 2012 performance of the MP systems is discussed. The strategy applied for a fast, but safe, intensity ramp up and the monitoring of the MP systems during stable running periods are presented. Weaknesses in the reliability of the MP systems, set-up procedures...

  19. Operant conditioning of a multiple degree-of-freedom brain-machine interface in a primate model of amputation.

    Science.gov (United States)

    Balasubramanian, Karthikeyan; Southerland, Joshua; Vaidya, Mukta; Qian, Kai; Eleryan, Ahmed; Fagg, Andrew H; Sluzky, Marc; Oweiss, Karim; Hatsopoulos, Nicholas

    2013-01-01

    Operant conditioning with biofeedback has been shown to be an effective method to modify neural activity to generate goal-directed actions in a brain-machine interface. It is particularly useful when neural activity cannot be mathematically mapped to motor actions of the actual body such as in the case of amputation. Here, we implement an operant conditioning approach with visual feedback in which an amputated monkey is trained to control a multiple degree-of-freedom robot to perform a reach-to-grasp behavior. A key innovation is that each controlled dimension represents a behaviorally relevant synergy among a set of joint degrees-of-freedom. We present a number of behavioral metrics by which to assess improvements in BMI control with exposure to the system. The use of non-human primates with chronic amputation is arguably the most clinically-relevant model of human amputation that could have direct implications for developing a neural prosthesis to treat humans with missing upper limbs.

  20. Operation of a quantum dot in the finite-state machine mode: Single-electron dynamic memory

    Science.gov (United States)

    Klymenko, M. V.; Klein, M.; Levine, R. D.; Remacle, F.

    2016-07-01

    A single electron dynamic memory is designed based on the non-equilibrium dynamics of charge states in electrostatically defined metallic quantum dots. Using the orthodox theory for computing the transfer rates and a master equation, we model the dynamical response of devices consisting of a charge sensor coupled to either a single and or a double quantum dot subjected to a pulsed gate voltage. We show that transition rates between charge states in metallic quantum dots are characterized by an asymmetry that can be controlled by the gate voltage. This effect is more pronounced when the switching between charge states corresponds to a Markovian process involving electron transport through a chain of several quantum dots. By simulating the dynamics of electron transport we demonstrate that the quantum box operates as a finite-state machine that can be addressed by choosing suitable shapes and switching rates of the gate pulses. We further show that writing times in the ns range and retention memory times six orders of magnitude longer, in the ms range, can be achieved on the double quantum dot system using experimentally feasible parameters, thereby demonstrating that the device can operate as a dynamic single electron memory.

  1. Validating cognitive support for operators of complex human-machine systems

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J. [Brookhaven National Lab., Upton, NY (United States); Wachtel, J. [US Nuclear Regulatory Commission, Washington, DC (United States)

    1995-10-01

    Modem nuclear power plants (NPPs) are complex systems whose performance is the result of an intricate interaction of human and system control. A complex system may be defined as one which supports a dynamic process involving a large number of elements that interact in many different ways. Safety is addressed through defense-in-depth design and preplanning; i.e., designers consider the types of failures that are most likely to occur and those of high consequence, and design their solutions in advance. However, complex interactions and their failure modes cannot always be anticipated by the designer and may be unfamiliar to plant personnel. These situations may pose cognitive demands on plant personnel, both individually and as a crew. Other factors may contribute to the cognitive challenges of NPP operation as well, including hierarchal processes, dynamic pace, system redundancy and reliability, and conflicting objectives. These factors are discussed in this paper.

  2. Factor V Leiden and Cardiopulmonary Bypass.

    Science.gov (United States)

    Uppal, Victor; Rosin, Mark; Marcoux, Jo-Anne; Olson, Marnie; Bezaire, Jennifer; Dalshaug, Gregory

    2015-12-01

    We present a case of a patient with factor V Leiden with an antithrombin III activity of 67% who received a successful aortic valve replacement supported by cardiopulmonary bypass (CPB). A safe level of anticoagulation was achieved by monitoring activated clotting time (ACT) and heparin concentration ensuring adequate anticoagulation throughout the procedure. Results from ACT, heparin dose response, heparin protamine titration, and thrombelastography are given. Factor V Leiden patients can be safely anti-coagulated using heparin for CPB procedures when monitored with ACT, heparin protamine titration, and thrombelastography. Postoperative chest tube losses were 360 mL, less than half our institutional average. Anticoagulation for the pre-and post-operative phase is also discussed.

  3. History of the evolution of cardiopulmonary resuscitation

    OpenAIRE

    2013-01-01

    Cardiopulmonary resuscitation (CPR) is as old as humankind. The evolution of CPR represents a combination of human errors and discoveries. Aim: The present study reviews the most important moments in the history of resuscitation, from the first attempts of CPR until now. Methods: The methodology followed included bibliography research from review literature, through databases PubMed, Medline, Scopus, with the use of keywords, such as cardiopulmonary arrest, cardiopulmonary resuscitation, hist...

  4. Cerebral injury and the inflammatory response in heart operation during and after cardiopulmonary bypass%体外循环心脏手术中的脑损伤与炎症反应

    Institute of Scientific and Technical Information of China (English)

    郭伟; 梅永成

    2008-01-01

    Objective To investigate the possible mechanisms involvedin cerebral injuryin heart operation during and after cardiopulmonary bypass(CPB), and the relation between cerebral injury and the inflammatory response. Methods Twenty-four patients undergoing heart remedy operation for ventricular septal defect(VSD) with CPB in cardiac surgery department of the Center Hospital of Zhumadian were studied. All patients were randomly divided into ulinastatin (UTI) group (n=12) and control group (n=12). Blood samples were taken from artery at four times intervals : after induction of anesthesia (T1), when rewarming to 36℃(T2), 30 min (T3) and 4h(T) after discontinuation of CPB for determination of plasma S100β protein, neuronspeeifi-cevolase (NSE), tumor necrosis factor-α(TNF-α) and interleukin-6 (IL-6), interleukin-8 (IL-8), interleukin-10(IL-10). Results The plasma concentrations of S100β protein, NSE, TNF-α, IL-6 IL-8 and IL-10 were no signifi-cant differences between the two groups before CPB(P > 0.05). During and after CPB the plasma level of S100β protein,NSE, TNF-α, IL-6 and IL-8 were lower in group UTI than that in group control (P )抽取颈静脉血,用ELISA法测定S100β蛋白、神经元特异性烯醇化酶(NSE)及白细胞介素10(IL-10)浓度,用放射免疫法测定肿瘤坏死因子-α(TNF-α)、白细胞介素6(IL-6)、白细胞介素8(IL-8)浓度.结果 CPB前两组患儿血浆S100β蛋白和NSE浓度以及血浆细胞因子TNF-α、IL-6、IL-8及IL-10浓度比较差异均无统计学意义(P>0.05).CPB后各时点,UTI组患儿血浆S100β蛋白、NSE、TNF-α、IL-6及IL-8浓度明显低于对照组,而UTI组患儿血浆IL-10浓度明显高于对照组,差异均有统计学意义(P<0.05).结论 CPB下心内直视术对脑有一定的损伤,其作用机制可能是与CPB期促炎细胞因子的释放、上调抗炎细胞因子有关.

  5. Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Chikkagoudar, Satish; Chatterjee, Samrat; Thomas, Dennis G.; Carroll, Thomas E.; Muller, George

    2017-04-21

    The absence of a robust and unified theory of cyber dynamics presents challenges and opportunities for using machine learning based data-driven approaches to further the understanding of the behavior of such complex systems. Analysts can also use machine learning approaches to gain operational insights. In order to be operationally beneficial, cybersecurity machine learning based models need to have the ability to: (1) represent a real-world system, (2) infer system properties, and (3) learn and adapt based on expert knowledge and observations. Probabilistic models and Probabilistic graphical models provide these necessary properties and are further explored in this chapter. Bayesian Networks and Hidden Markov Models are introduced as an example of a widely used data driven classification/modeling strategy.

  6. 21 CFR 870.4310 - Cardiopulmonary bypass coronary pressure gauge.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass coronary pressure gauge... Cardiopulmonary bypass coronary pressure gauge. (a) Identification. A cardiopulmonary bypass coronary pressure... the coronary arteries. (b) Classification. Class II (performance standards). ...

  7. The Aachen miniaturized heart-lung machine--first results in a small animal model.

    Science.gov (United States)

    Schnoering, Heike; Arens, Jutta; Sachweh, Joerg S; Veerman, Melanie; Tolba, Rene; Schmitz-Rode, Thomas; Steinseifer, Ulrich; Vazquez-Jimenez, Jaime F

    2009-11-01

    Congenital heart surgery most often incorporates extracorporeal circulation. Due to foreign surface contact and the administration of foreign blood in many children, inflammatory response and hemolysis are important matters of debate. This is particularly an issue in premature and low birth-weight newborns. Taking these considerations into account, the Aachen miniaturized heart-lung machine (MiniHLM) with a total static priming volume of 102 mL (including tubing) was developed and tested in a small animal model. Fourteen female Chinchilla Bastard rabbits were operated on using two different kinds of circuits. In eight animals, a conventional HLM with Dideco Kids oxygenator and Stöckert roller pump (Sorin group, Milan, Italy) was used, and the Aachen MiniHLM was employed in six animals. Outcome parameters were hemolysis and blood gas analysis including lactate. The rabbits were anesthetized, and a standard median sternotomy was performed. The ascending aorta and the right atrium were cannulated. After initiating cardiopulmonary bypass, the aorta was cross-clamped, and cardiac arrest was induced by blood cardioplegia. Blood samples for hemolysis and blood gas analysis were drawn before, during, and after cardiopulmonary bypass. After 1 h aortic clamp time, all animals were weaned from cardiopulmonary bypass. Blood gas analysis revealed adequate oxygenation and perfusion during cardiopulmonary bypass, irrespective of the employed perfusion system. The use of the Aachen MiniHLM resulted in a statistically significant reduced decrease in fibrinogen during cardiopulmonary bypass. A trend revealing a reduced increase in free hemoglobin during bypass in the MiniHLM group could also be observed. This newly developed Aachen MiniHLM with low priming volume, reduced hemolysis, and excellent gas transfer (O(2) and CO(2)) may reduce circuit-induced complications during heart surgery in neonates.

  8. Method for Virtual Prototyping of Cabins of Mining Machines Operators / Metoda Wirtualnego Prototypowania Kabin Operatorów Maszyn Górniczych

    Science.gov (United States)

    Tokarczyk, Jarosław

    2015-03-01

    Method for virtual prototyping of cabins of mining machines operators is presented in the light of anthropotechnical assessment criteria. Anthropotechnical criteria and design of models of anthropometric features, which are used for assessment of design solutions in the aspect of safety criterion, are divided and discussed. Developed virtual prototyping method for assessment of cabin of underground locomotive operator was used. Initial simulation was made with use of Finite Element Method. W artykule przedstawiono metodę wirtualnego prototypowania kabin operatorów maszyn górniczych w świetle antropotechnicznych kryteriów oceny. Dokonano podziału i omówiono kryteria antropotechniczne. Przedstawiono definicję kryterium urazu głowy HIC (ang. Head Injury Criterion) oraz prawdopodobieństwo wystąpienia urazu głowy w funkcji wartości parametru HIC. Zaprezentowano budowę modeli cech antropometrycznych, dedykowanych do oceny rozwiązań konstrukcyjnych w aspekcie kryterium bezpieczeństwa wraz z opisem statycznych i dynamicznych cech antropometrycznych. Omówiono proces tworzenia wirtualnego odpowiednika manekina do testów zderzeniowych, tzw. modelu ATB (ang. Articulated Total Body). Podano odniesienia do norm dotyczących konstrukcji chroniących operatorów przed spadającymi przedmiotami. Przedstawiono schemat metody wirtualnego prototypowania kabin operatorów w aspekcie kryterium bezpieczeństwa. Zastosowano opracowaną metodę wirtualnego prototypowania do oceny kabiny operatora lokomotywy dołowej. Omówiono główne elementy składowe modelu obliczeniowego. Zadanie rozwiązano przy użyciu metody elementów skończonych. Przedstawiono wstępne wyniki symulacji, tj. obliczono parametr HIC dla zadanych warunków brzegowych. W podsumowaniu zaprezentowano główne cele wirtualnego prototypowania kabin operatorów dla kryterium bezpieczeństwa. Zwrócono uwagę na uniwersalność zastosowanej metody.

  9. Evaluation of Multi Canister Overpack (MCO) Handling Machine Uplift Restraint for a Seismic Event During Repositioning Operations

    Energy Technology Data Exchange (ETDEWEB)

    SWENSON, C.E.

    2000-05-15

    Insertion of the Multi-Canister Overpack (MCO) assemblies into the Canister Storage Building (CSB) storage tubes involves the use of the MCO Handling Machine (MHM). During MCO storage tube insertion operations, inadvertent movement of the MHM is prevented by engaging seismic restraints (''active restraints'') located adjacent to both the bridge and trolley wheels. During MHM repositioning operations, the active restraints are not engaged. When the active seismic restraints are not engaged, the only functioning seismic restraints are non-engageable (''passive'') wheel uplift restraints which function only if the wheel uplift is sufficient to close the nominal 0.5-inch gap at the uplift restraint interface. The MHM was designed and analyzed in accordance with ASME NOG-1-1995. The ALSTHOM seismic analysis reported seismic loads on the MHM uplift restraints and EDERER performed corresponding structural calculations to demonstrate structural adequacy of the seismic uplift restraint hardware. The ALSTHOM and EDERER calculations were performed for a parked MHM with the active seismic restraints engaged, resulting in uplift restraint loading only in the vertical direction. In support of development of the CSB Safety Analysis Report (SAR), an evaluation of the MHM seismic response was requested for the case where the active seismic restraints are not engaged. If a seismic event occurs during MHM repositioning operations, a moving contact at a seismic uplift restraint would introduce a friction load on the restraint in the direction of the movement. These potential horizontal friction loads on the uplift restraints were not included in the existing restraint hardware design calculations. One of the purposes of the current evaluation is to address the structural adequacy of the MHM seismic uplift restraints with the addition of the horizontal friction associated with MHM repositioning movements.

  10. Analysis of accidents leading to amputations associated with operating with press machines, using Ishikawa and SCAT Combined method in a car manufacturing company

    Directory of Open Access Journals (Sweden)

    J. Nematolahi

    2015-12-01

      Conclusion: According to results, the main interfce causes of accidents leading to amputation due to operating with press machines is hurry at work because of increased production volume particularly by contractor companies. Furthermore, non-dynamic HSE system accompanied by ineffective supervision of personnel’s unsafe acts by the first layers of management are recognized as the basic causes of such accidents.

  11. Geoparsing text for characterizing urban operational environments through machine learning techniques

    Science.gov (United States)

    Garfinkle, Noah W.; Selig, Lucas; Perkins, Timothy K.; Calfas, George W.

    2017-05-01

    Increasing worldwide internet connectivity and access to sources of print and open social media has increased near realtime availability of textual information. Capabilities to structure and integrate textual data streams can contribute to more meaningful representations of operational environment factors (i.e., Political, Military, Economic, Social, Infrastructure, Information, Physical Environment, and Time [PMESII-PT]) and tactical civil considerations (i.e., Areas, Structures, Capabilities, Organizations, People and Events [ASCOPE]). However, relying upon human analysts to encode this information as it arrives quickly proves intractable. While human analysts possess an ability to comprehend context in unstructured text far beyond that of computers, automated geoparsing (the extraction of locations from unstructured text) can empower analysts to automate sifting through datasets for areas of interest. This research evaluates existing approaches to geoprocessing as well as initiating the research and development of locally-improved methods of tagging parts of text as possible locations, resolving possible locations into coordinates, and interfacing such results with human analysts. The objective of this ongoing research is to develop a more contextually-complete picture of an area of interest (AOI) including human-geographic context for events. In particular, our research is working to make improvements to geoparsing (i.e., the extraction of spatial context from documents), which requires development, integration, and validation of named-entity recognition (NER) tools, gazetteers, and entity-attribution. This paper provides an overview of NER models and methodologies as applied to geoparsing, explores several challenges encountered, presents preliminary results from the creation of a flexible geoparsing research pipeline, and introduces ongoing and future work with the intention of contributing to the efficient geocoding of information containing valuable

  12. Some relations between quantum Turing machines and Turing machines

    CERN Document Server

    Sicard, A; Sicard, Andrés; Vélez, Mario

    1999-01-01

    For quantum Turing machines we present three elements: Its components, its time evolution operator and its local transition function. The components are related with deterministic Turing machines, the time evolution operator is related with reversible Turing machines and the local transition function is related with probabilistic and reversible Turing machines.

  13. Utilising cardiopulmonary bypass for cancer surgery. Malignancy-induced protein C deficiency and thrombophilia.

    LENUS (Irish Health Repository)

    Marshall, C

    2012-02-03

    Cardiopulmonary bypass has evolved over the last 30 years. It is an important tool for the cardiac surgeon today and also has applications in non-cardiac operations such as surgery to extract tumours. Such patients undergoing surgery for cancer may be at an increased risk of a thromboembolic event post surgery, due to disturbances in the normal clotting pathway leading to hypercoagulability. One such disturbance is malignancy-induced Protein C deficiency. A deficiency of Protein C can cause hypercoagulabitity. Recent studies have examined cardiopulmonary bypass and inherited Protein C deficiency. However, surgery for cancer patients with a malignancy-induced Protein C deficiency involving cardiopulmonary bypass has not been reported. Surgery using CPB in these patients may result in increased morbidity and mortality. The objective of this article is to review the literature in order to discuss the occurrence, the aetiology and possible management of cancer patients with malignancy-induced Protein C deficiencies that require cardiopulmonary bypass for their surgery.

  14. Quantify work load and muscle functional activation patterns in neck-shoulder muscles of female sewing machine operators using surface electromyogram

    Institute of Scientific and Technical Information of China (English)

    ZHANG Fei-ruo; HE Li-hua; WU Shan-shan; LI Jing-yun; YE Kang-pin; WANG Sheng

    2011-01-01

    Background Work-related musculoskeletal disorders (WMSDs) have high prevalence in sewing machine operators employed in the garment industry.Long work duration,sustained low level work and precise hand work are the main risk factors of neck-shoulder disorders for sewing machine operators.Surface electromyogram (sEMG) offers a valuable tool to determine muscle activity (internal exposure) and quantify muscular load (external exposure).During sustained and/or repetitive muscle contractions,typical changes of muscle fatigue in sEMG,as an increase in amplitude or a decrease as a shift in spectrum towards lower frequencies,can be observed.In this paper,we measured and quantified the muscle load and muscular activity patterns of neck-shoulder muscles in female sewing machine operators during sustained sewing machine operating tasks using sEMG.Methods A total of 18 healthy women sewing machine operators volunteered to participate in this study.Before their daily sewing machine operating task,we measured the maximal voluntary contractions (MVC) and 20%MVC of bilateral cervical erector spinae (CES) and upper trapezius (UT) respectively,then the sEMG signals of bilateral UT and CES were monitored and recorded continuously during 200 minutes of sustained sewing machine operating simultaneously which equals to 20 time windows with 10 minutes as one time window.After 200 minutes' work,we retest 20%MVC of four neck-shoulder muscles and recorded the sEMG signals.Linear analysis,including amplitude probability distribution frequency (APDF),amplitude analysis parameters such as roof mean square (RMS) and spectrum analysis parameter as median frequency (MF),were used to calculate and indicate muscle load and muscular activity of bilateral CES and UT.Results During 200 minutes of sewing machine operating,the median load for the left cervical erector spinae (LCES),right cervical erector spinae (RCES),left upper trapezius (LUT) and right upper trapezius (RUT) were 6.78%MVE,6.94

  15. Whole-body Vibration Exposure of Drill Operators in Iron Ore Mines and Role of Machine-Related, Individual, and Rock-Related Factors.

    Science.gov (United States)

    Chaudhary, Dhanjee Kumar; Bhattacherjee, Ashis; Patra, Aditya Kumar; Chau, Nearkasen

    2015-12-01

    This study aimed to assess the whole-body vibration (WBV) exposure among large blast hole drill machine operators with regard to the International Organization for Standardization (ISO) recommended threshold values and its association with machine- and rock-related factors and workers' individual characteristics. The study population included 28 drill machine operators who had worked in four opencast iron ore mines in eastern India. The study protocol comprised the following: measurements of WBV exposure [frequency weighted root mean square (RMS) acceleration (m/s(2))], machine-related data (manufacturer of machine, age of machine, seat height, thickness, and rest height) collected from mine management offices, measurements of rock hardness, uniaxial compressive strength and density, and workers' characteristics via face-to-face interviews. More than 90% of the operators were exposed to a higher level WBV than the ISO upper limit and only 3.6% between the lower and upper limits, mainly in the vertical axis. Bivariate correlations revealed that potential predictors of total WBV exposure were: machine manufacturer (r = 0.453, p = 0.015), age of drill (r = 0.533, p = 0.003), and hardness of rock (r = 0.561, p = 0.002). The stepwise multiple regression model revealed that the potential predictors are age of operator (regression coefficient β = -0.052, standard error SE = 0.023), manufacturer (β = 1.093, SE = 0.227), rock hardness (β = 0.045, SE = 0.018), uniaxial compressive strength (β = 0.027, SE = 0.009), and density (β = -1.135, SE = 0.235). Prevention should include using appropriate machines to handle rock hardness, rock uniaxial compressive strength and density, and seat improvement using ergonomic approaches such as including a suspension system.

  16. Prediction and Optimization Approaches for Modeling and Selection of Optimum Machining Parameters in CNC down Milling Operation

    Directory of Open Access Journals (Sweden)

    Asaad A. Abdullah

    2014-04-01

    Full Text Available In this study, we suggested intelligent approach to predict and optimize the cutting parameters when down milling of 45# steel material with cutting tool PTHK- (Ø10*20C*10D*75L -4F-1.0R under dry condition. The experiments were performed statistically according to four factors with three levels in Taguchi experimental design method. Adaptive Neuro-fuzzy inference system is utilized to establish the relationship between the inputs and output parameter exploiting the Taguchi orthogonal array L27. The Particle Swarm Optimized-Adaptive Neuro-Fuzzy Inference System (PSOANFIS is suggested to select the best cutting parameters providing the lower surface through from the experimental data using ANFIS models to predict objective functions. The PSOANFIS optimization approach that improves the surface quality from 0.212 to 0.202, as well as the cutting time is also reduced from 7.5 to 4.78 sec according to machining parameters before and after optimization process. From these results, it can be readily achieved that the advanced study is trusted and suitable for solving other problems encountered in metal cutting operations and the same surface roughness.

  17. Multiple dimensions of cardiopulmonary dyspnea

    Institute of Scientific and Technical Information of China (English)

    HAN Jiang-na; XIONG Chang-ming; YAO Wei; FANG Qiu-hong; ZHU Yuan-jue; CHENG Xian-sheng; Karel P Van de Woestijne

    2011-01-01

    Background The current theory of dyspnea perception presumes a multidimensional conception of dyspnea.However,its validity in patients with cardiopulmonary dyspnea has not been investigated.Methods A respiratory symptom checklist incorporating spontaneously reported descriptors of sensory experiences of breathing discomfort,affective aspects,and behavioral items was administered to 396 patients with asthma,chronic obstructive pulmonary disease (COPD),diffuse parenchymal lung disease,pulmonary vascular disease,chronic heart failure,and medically unexplained dyspnea.Symptom factors measuring different qualitative components of dyspnea were derived by a principal component analysis.The separation of patient groups was achieved by a variance analysis on symptom factors.Results Seven factors appeared to measure three dimensions of dyspnea:sensory (difficulty breathing and phase of respiration,depth and frequency of breathing,urge to breathe,wheeze),affective (chest tightness,anxiety),and behavioral (refraining from physical activity) dimensions.Difficulty breathing and phase of respiration occurred more often in COPD,followed by asthma (R2=0.12).Urge to breathe was unique for patients with medically unexplained dyspnea (R2=0.12).Wheeze occurred most frequently in asthma,followed by COPD and heart failure (R2=0.17).Chest tightness was specifically linked to medically unexplained dyspnea and asthma (R2=0.04).Anxiety characterized medically unexplained dyspnea (R2=0.08).Refraining from physical activity appeared more often in heart failure,pulmonary vascular disease,and COPD (R2=0.15).Conclusions Three dimensions with seven qualitative components of dyspnea appeared in cardiopulmonary disease and the components under each dimension allowed separation of different patient groups.These findings may serve as a validation on the multiple dimensions of cardiopulmonary dyspnea.

  18. History of cardiopulmonary bypass (CPB).

    Science.gov (United States)

    Hessel, Eugene A

    2015-06-01

    The development of cardiopulmonary bypass (CPB), thereby permitting open-heart surgery, is one of the most important advances in medicine in the 20th century. Many currently practicing cardiac anesthesiologists, cardiac surgeons, and perfusionists are unaware of how recently it came into use (60 years) and how much the practice of CPB has changed during its short existence. In this paper, the development of CPB and the many changes and progress that has taken place over this brief period of time, making it a remarkably safe endeavor, are reviewed. The many as yet unresolved questions are also identified, which sets the stage for the other papers in this issue of this journal.

  19. Machine learning-based receiver operating characteristic (ROC) curves for crisp and fuzzy classification of DNA microarrays in cancer research.

    Science.gov (United States)

    Peterson, Leif E; Coleman, Matthew A

    2008-01-01

    Receiver operating characteristic (ROC) curves were generated to obtain classification area under the curve (AUC) as a function of feature standardization, fuzzification, and sample size from nine large sets of cancer-related DNA microarrays. Classifiers used included k nearest neighbor (kNN), näive Bayes classifier (NBC), linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), learning vector quantization (LVQ1), logistic regression (LOG), polytomous logistic regression (PLOG), artificial neural networks (ANN), particle swarm optimization (PSO), constricted particle swarm optimization (CPSO), kernel regression (RBF), radial basis function networks (RBFN), gradient descent support vector machines (SVMGD), and least squares support vector machines (SVMLS). For each data set, AUC was determined for a number of combinations of sample size, total sum[-log(p)] of feature t-tests, with and without feature standardization and with (fuzzy) and without (crisp) fuzzification of features. Altogether, a total of 2,123,530 classification runs were made. At the greatest level of sample size, ANN resulted in a fitted AUC of 90%, while PSO resulted in the lowest fitted AUC of 72.1%. AUC values derived from 4NN were the most dependent on sample size, while PSO was the least. ANN depended the most on total statistical significance of features used based on sum[-log(p)], whereas PSO was the least dependent. Standardization of features increased AUC by 8.1% for PSO and -0.2% for QDA, while fuzzification increased AUC by 9.4% for PSO and reduced AUC by 3.8% for QDA. AUC determination in planned microarray experiments without standardization and fuzzification of features will benefit the most if CPSO is used for lower levels of feature significance (i.e., sum[-log(p)] ~ 50) and ANN is used for greater levels of significance (i.e., sum[-log(p)] ~ 500). When only standardization of features is performed, studies are likely to benefit most by using CPSO for low levels

  20. Modeling the Relationship between Vibration Features and Condition Parameters Using Relevance Vector Machines for Health Monitoring of Rolling Element Bearings under Varying Operation Conditions

    Directory of Open Access Journals (Sweden)

    Lei Hu

    2015-01-01

    Full Text Available Rotational speed and load usually change when rotating machinery works. Both this kind of changing operational conditions and machine fault could make the mechanical vibration characteristics change. Therefore, effective health monitoring method for rotating machinery must be able to adjust during the change of operational conditions. This paper presents an adaptive threshold model for the health monitoring of bearings under changing operational conditions. Relevance vector machines (RVMs are used for regression of the relationships between the adaptive parameters of the threshold model and the statistical characteristics of vibration features. The adaptive threshold model is constructed based on these relationships. The health status of bearings can be indicated via detecting whether vibration features exceed the adaptive threshold. This method is validated on bearings running at changing speeds. The monitoring results show that this method is effective as long as the rotational speed is higher than a relative small value.

  1. Large A.C. machines theory and investigation methods of currents and losses in stator and rotor meshes including operation with nonlinear loads

    CERN Document Server

    Boguslawsky, Iliya; Hayakawa, Masashi

    2017-01-01

    In this monograph the authors solve the modern scientific problems connected with A.C. motors and generators, based first on the detailed consideration of their physical phenomena. The authors describe the theory and investigative methods they developed and applied in practice, which are considered to be of essential interest for specialists in the field of the electrical engineering industry in European countries, the USA, Argentina, and Brazil, as well as in such countries as India, China, and Iran. This book will be of interest to engineers specialized in the field of the manufacture, operation, and repair of A.C. machines (motors and generators) as well as electric drives; to professors, lecturers, and post-graduate students of technical universities, who are specializing in the field of electric machine engineering and electric drives; and to students who are engaged in the field of high current techniques, electric drives, and electric machine engineering.

  2. Choice of material and development of technology to manufacture the working parts of a rotor operating in machine for turning of triangular heaps

    Directory of Open Access Journals (Sweden)

    W. Uhl

    2008-07-01

    Full Text Available The theoretical part of the study discloses the genesis of the research which originated from a possibility of replacing the so far used expensive machine parts with parts cheaper and yet offering similar quality and performance life. A short characteristic of the machine was given where the main operating parts made so far from steel were replaced with parts made from cast iron. The equipment and its main applications were described.In the research part of the study several types of alloys were proposed. Their use is expected to ensure the required performance life of parts combined with price reduction. A short characteristic of the proposed material was given. A technology of making moulds for the said machine parts was developed. Using this technology, the respective moulds were made and poured next with three cast alloys.One of the proposed materials was subjected to four types of the heat treatment, two alloys used as reference materials were left in as-cast state. The castings were fettled and weighed. The hardness of the cast materials was measured.The working (turning parts were delivered for operation to a sewage-treatment plant where, after assembly in a turning machine, the performance tests were conducted.

  3. Electrical machines mathematical fundamentals of machine topologies

    CERN Document Server

    Gerling, Dieter

    2015-01-01

    Electrical Machines and Drives play a powerful role in industry with an ever increasing importance. This fact requires the understanding of machine and drive principles by engineers of many different disciplines. Therefore, this book is intended to give a comprehensive deduction of these principles. Special attention is given to the precise mathematical derivation of the necessary formulae to calculate machines and drives and to the discussion of simplifications (if applied) with the associated limits. The book shows how the different machine topologies can be deduced from general fundamentals, and how they are linked together. This book addresses graduate students, researchers, and developers of Electrical Machines and Drives, who are interested in getting knowledge about the principles of machine and drive operation and in detecting the mathematical and engineering specialties of the different machine and drive topologies together with their mutual links. The detailed - but nevertheless compact - mat...

  4. 烟草翻耕机作业适应性研究%The Adaptability Research on the Operation Quality of the Tobaccoploughing Machines

    Institute of Scientific and Technical Information of China (English)

    徐阳; 郑俊; 吴睿; 马豪; 朱云

    2015-01-01

    This article mainly talked about the hanging 4 different width of leaf tobacco tilling plough body machine oper-ation benefits , efficiency , operation effect indexes such as the field contrast test , the experimental results show that the 25 cm and 30 cm width of tilling machine can not meet the requirement of the tobacco planting ploughing agronomy , 35 cm and 38 cm width of tilling machine can satisfy the requirement of the tobacco planting ploughing agronomic , 38 cm width of tilling machine can effectively reduce fuel consumption , improve the production efficiency , guarantee the produc-tion effect, save tobacco growing economic costs;35 cm width of tilling machine operation effect is more stable , deep till-age spade, but fuel consumption is relatively high , the efficiency is low.Therefore, 38 cm width of tilling machine can adapt to more tobacco ploughing in the field operation .%对悬挂式4犁体不同幅宽的烟叶翻耕机的作业效益、作业效率及作业效果等指标进行田间对比试验。试验结果表明:25cm 与30cm 幅宽的翻耕机不能满足烟草种植翻耕的农艺要求,35cm 与38cm 幅宽的翻耕机都能满足烟草种植翻耕的农艺要求;38 cm 幅宽的翻耕机能够有效地降低油耗,提高生产效率,保证生产效果,节省烟草种植经济成本;35 cm 幅宽的翻耕机作业效果更稳定,耕深更深,但油耗相对较高,作业效率较低。因此, 38 cm幅宽的翻耕机更能适应烟草田间翻耕作业。

  5. Is it necessary to stent renal artery stenosis patients before cardiopulmonary bypass procedures?

    Institute of Scientific and Technical Information of China (English)

    ZHENG Bin; YAN Hong-bing; LIU Rui-fang; CHENG Shu-juan; WANG Jian; ZHAO Han-jun; SONG Li

    2011-01-01

    Background Acute kidney injury (AKI) is associated with poor prognosis after cardiopulmonary bypass. The aim of this retrospective study was to investigate whether stent implantation before cardiopulmonary bypass has beneficial effect on development of AKI in renal artery stenosis (RAS) patients.Methods In this retrospective study, patients with abnormal baseline serum creatinine (SCr, >106 μmol/L) were not included. Included patients (n=69) were divided into two groups. Group 1 included 31 RAS patients receiving no stent implantation before cardiopulmonary bypass. Group 2 included 38 RAS patients having received stent implantation just before cardiopulmonary bypass. To assess AKI after cardiopulmonary bypass, serum urea nitrogen, SCr and creatinine clearance were recorded at baseline, at the end of operation, during the first and second postoperative 24 hours.Results Baseline characteristics were similar between groups. Serum urea nitrogen, SCr, creatinine clearance before and after cardiopulmonary bypass were also similar class groups. Incidence of AKI in group 1 was not significantly different from group 2. In group 1, AKI defined by RIFLE between occurred in 7 (22.6%) patients: 5 (16.1%) with RIFLE-R,2 (6.5%) with RIFLE-I, and no patients with RIFLE-F. In group 2, 10 patients (26.3%) had an episode of AKI during hospitalization: 6 (15.8%) had RIFLE-R, 4 (10.5%) had RIFLE-I, and no patients had RIFLE-F.Conclusions There are no data suggesting that it is necessary to stent RAS patients with normal SCr before cardiopulmonary bypass. However, it cannot be concluded that RAS is not associated with AKI after cardiopulmonary bypass.

  6. Meta-analysis of effectiveness of edaravone for treatment against ischemic-reperfusion injury in patients undergoing cardic operation with cardiopulmonary by-pass%依达拉奉对体外循环心脏手术患者心肌缺血再灌注损伤治疗作用的meta分析

    Institute of Scientific and Technical Information of China (English)

    黄建敏; 杜书章; 张晓坚

    2011-01-01

    Aim: To assess the effectiveness of edaravone for treatment against ischemic-reperfusion injury (IRI) in patients undergoing cardie operation with cardiopulmonary by-pass. Methods: The related articles were searched, Pubmed, Highwire Press, EMBASE, WAN FANG DATA.CNKI and China Biological Medcine Database from Apr. 2001 to Jul. 2010.The Revman 5.0 software was used for the meta analysis. ReSUltS:A total of 6 RCT (n =202) were identified. The level of methodology was classified as B. Compared with the control group,in edravone group,there are significant difference in the spontaneous return rates of hearts after aorta declamping was higher (RR = 1.54,95% C/= 1.05 -2.25.P =0.03) ; and also in plasma concentration of MDA( at 2 h,6 h and 24 h after aorta declamping) ,serum concentation of SOD(24 h after surgery operation 95% CI = 0. 47 ~ 1. 18, SMD = 0. 82, P < 0. 001), CK-MB and cTnl ( at 6 h and 24 h after aorta declamping). Conclusion:Edaravone may have some protective effect for the treatment against ischemic-reperfusion injuryin patients undergoing cardiac operation with cardiopulmonary by-pass.%目的:运用meta分析法评价依达拉奉对体外循环心脏手术患者心肌缺血再灌注损伤(IRI)的疗效。方法:运用Cochrane系统评价的方法,检索Pubmed、Highwire Press、EMBASE、中国知网、万方科技文献数据库和中国生物医学文献数据库的文献及其

  7. Investigation of an experimental ejector refrigeration machine operating with refrigerant R245fa at design and off-design working conditions. Part 1. Theoretical analysis

    KAUST Repository

    Shestopalov, K.O.

    2015-07-01

    © 2015 Elsevier Ltd and IIR.All rights reserved. The ejector refrigeration machine (ERM) offers several advantages over other heat-driven refrigeration machine, including simplicity in design and operation, high reliability and low installation cost, which enable its wide application in the production of cooling. In this paper the theoretical analysis of ejector design and ejector refrigeration cycle performance is presented. It is shown that ERM performance characteristics depend strongly on the operating conditions, the efficiency of the ejector used, and the thermodynamic properties of the refrigerant used. A 1-D model for the prediction of the entrainment ratio ω, and an optimal design for ejectors with cylindrical and conical-cylindrical mixing chambers are presented in this paper. In order to increase ERM performance values, it is necessary first of all to improve the performance of the ejector.

  8. Environmental and organizational factors associated with elbow/forearm and hand/wrist disorder among sewing machine operators of garment industry in Ethiopia.

    Science.gov (United States)

    Kebede Deyyas, Wakjira; Tafese, Ararso

    2014-01-01

    Occupational health problems related to upper limp musculoskeletal disorders were the major issue among sewing machine operators of garment industries in Ethiopia. The aim of this study was to assess the prevalence and associated risk factors of work related elbow and wrist musculoskeletal disorders among sewing machine operators of garment industries in Galan City, Oromia Regional State. A cross-sectional study was conducted from April 1 to 30, 2012. A total of 422 study subjects were included in this study. Standard Nordic Musculoskeletal Questionnaire was used to collect detailed information on musculoskeletal symptom, sociodemographic data, and factors associated with the problems through face to face interview. From a total of 422 sewing machine operators included in the study 370 (87.7%) were females and 306 (72.5%) were in the age group of 16 years of service were about five times more likely to develop elbow and wrist musculoskeletal disorders than those who had short (1-5 years) year of services [AOR = 4.7, 95% CI: 1.55-13.02], physical activities [AOR = 5.02, 95% CI: 1.57-16.00], and methods of payment [AOR = 2.01, 95% CI: 1.23-3.28], factors significantly associated with this disorders. Work related elbow and wrist musculoskeletal disorders were high among sewing machine operators in selected garment industries. Moreover, personal and environmental factors were identified as the potential risk factors related to elbow and wrist musculoskeletal disorders among the study group. Therefore, government and the owner of the garment industries should give special attention to prevent and control the problems through proper occupational health and safety policy implementation in the country.

  9. Environmental and Organizational Factors Associated with Elbow/Forearm and Hand/Wrist Disorder among Sewing Machine Operators of Garment Industry in Ethiopia

    Directory of Open Access Journals (Sweden)

    Wakjira Kebede Deyyas

    2014-01-01

    Full Text Available Occupational health problems related to upper limp musculoskeletal disorders were the major issue among sewing machine operators of garment industries in Ethiopia. The aim of this study was to assess the prevalence and associated risk factors of work related elbow and wrist musculoskeletal disorders among sewing machine operators of garment industries in Galan City, Oromia Regional State. A cross-sectional study was conducted from April 1 to 30, 2012. A total of 422 study subjects were included in this study. Standard Nordic Musculoskeletal Questionnaire was used to collect detailed information on musculoskeletal symptom, sociodemographic data, and factors associated with the problems through face to face interview. From a total of 422 sewing machine operators included in the study 370 (87.7% were females and 306 (72.5% were in the age group of 16 years of service were about five times more likely to develop elbow and wrist musculoskeletal disorders than those who had short (1–5 years year of services [AOR = 4.7, 95% CI: 1.55–13.02], physical activities [AOR = 5.02, 95% CI: 1.57–16.00], and methods of payment [AOR = 2.01, 95% CI: 1.23–3.28], factors significantly associated with this disorders. Work related elbow and wrist musculoskeletal disorders were high among sewing machine operators in selected garment industries. Moreover, personal and environmental factors were identified as the potential risk factors related to elbow and wrist musculoskeletal disorders among the study group. Therefore, government and the owner of the garment industries should give special attention to prevent and control the problems through proper occupational health and safety policy implementation in the country.

  10. Cardiopulmonary Bypass and Oxidative Stress

    Directory of Open Access Journals (Sweden)

    Mustafa Zakkar

    2015-01-01

    Full Text Available The development of the cardiopulmonary bypass (CPB revolutionized cardiac surgery and contributed immensely to improved patients outcomes. CPB is associated with the activation of different coagulation, proinflammatory, survival cascades and altered redox state. Haemolysis, ischaemia, and perfusion injury and neutrophils activation during CPB play a pivotal role in oxidative stress and the associated activation of proinflammatory and proapoptotic signalling pathways which can affect the function and recovery of multiple organs such as the myocardium, lungs, and kidneys and influence clinical outcomes. The administration of agents with antioxidant properties during surgery either intravenously or in the cardioplegia solution may reduce ROS burst and oxidative stress during CPB. Alternatively, the use of modified circuits such as minibypass can modify both proinflammatory responses and oxidative stress.

  11. Cardiopulmonary loading in motocross riding.

    Science.gov (United States)

    Konttinen, Tomi; Häkkinen, Keijo; Kyröläinen, Heikki

    2007-07-01

    The present study was designed to examine physiological responses during motocross riding. Nine Finnish A-level motocross riders performed a 15-min ride at a motocross track and a test of maximal oxygen uptake (VO2max) in the laboratory. Cardiopulmonary strain was measured continuously during the ride as well as in the VO2max test. During the ride, mean VO2 was 32 ml x kg(-1) x min(-1) (s = 4), which was 71% (s = 12) of maximum, while ventilation (V(E)) was 73% (s = 15) of its maximum. The relative VO2 and V(E) values during the riding correlated with successful riding performance (r = 0.80, P motocross causes riders great physical stress. Both aerobic and anaerobic metabolism is required for the isometric and dynamic muscle actions experienced during a ride.

  12. Cardiopulmonary helminths in foxes from the Pyrenees.

    Science.gov (United States)

    Garrido-Castañé, Ignasi; Ortuño, Anna; Marco, Ignasi; Castellà, Joaquim

    2015-12-01

    The present survey was carried out to investigate the prevalence of cardiopulmonary helminths in red foxes in Pyrenees area and to evaluate the role of foxes in the eco-epidemiology of these nematodes. Hearts and entire respiratory tracts were obtained from 87 foxes from Vall d'Aran region, Pyrenees, Catalonia, north-eastern Spain. The cardiopulmonary tracts were dissected, flushed and examined for nematodes using sedimented flushing water. Of the 87 examined foxes, 53 (61%) were positive for cardiopulmonary helminths. The identified nematodes were Crenosoma vulpis (44.8%), Eucoleus aerophilus (29.9%) and Angiostrongylus vasorum (3.4%). Statistical differences were observed only on comparing age and C.vulpis prevalence, with young foxes being more infected than adults. The high prevalence of cardiopulmonary nematodes suggested that red foxes may play an important role in their transmission and maintenance in the studied area.

  13. Asynchronized synchronous machines

    CERN Document Server

    Botvinnik, M M

    1964-01-01

    Asynchronized Synchronous Machines focuses on the theoretical research on asynchronized synchronous (AS) machines, which are "hybrids” of synchronous and induction machines that can operate with slip. Topics covered in this book include the initial equations; vector diagram of an AS machine; regulation in cases of deviation from the law of full compensation; parameters of the excitation system; and schematic diagram of an excitation regulator. The possible applications of AS machines and its calculations in certain cases are also discussed. This publication is beneficial for students and indiv

  14. The impact analysis of the connecting pipe length and diameter on the operation of a piston hybrid power machine of positive displacement with gas suction capacity

    Science.gov (United States)

    Shcherba, V. E.; Grigoriev, A. V.; Averyanov, G. S.; Surikov, V. I.; Vedruchenko, V. P.; Galdin, N. S.; Trukhanova, D. A.

    2017-08-01

    The article analyzes the impact of the connecting liquid pipe length and diameter on consumables and power characteristics of the piston hybrid power machine with gas suction capacity. The following operating characteristics of the machine were constructed and analyzed: the average height of the liquid column in the jacket space; instantaneous velocity and height of the liquid column in the jacket space; the relative height of the liquid column in the jacket space; volumetric efficiency; indicator isothermal efficiency; flowrate in the pump section; relative pressure losses during suction; relative flowrate. The dependence of the instantaneous pressure in the work space and the suction space of the compressor section on the rotation angle of the crankshaft is determined for different values of the length and diameter of the connecting pipeline.

  15. Influence of forest machine function on operator exposure to whole-body vibration in a cut-to-length timber harvester.

    Science.gov (United States)

    Sherwin, L M; Owende, P M O; Kanali, C L; Lyons, J; Ward, S M

    2004-09-15

    The influence of machine function (tree felling and processing, and machine movement over the terrain) on operator exposure to whole-body vibration in a cut-to-length (CTL) timber harvester was evaluated. Vibrations were measured on the seat and the cabin chassis in three orthogonal (x, y, z) axes for the tree felling and processing, and during motion on a test track. It was found that the level of vibration transmitted to the operator during felling and processing was mainly affected by the tree size (diameter). For tree diameter at breast height (dbh) range of 0.25-0.35 m that was investigated, the vertical (z-axis) vibration component during processing increased by up to 300%, and increased by 50% during felling. However, the associated vibration levels were not sufficient to pose any serious health risks to the operator for an exposure limit of 8 h. Vibration at the operator seat and cabin chassis was predominant in the lateral (y-axis) and vertical (z-axis) respectively, during vehicle motion over the standard test track. Vibration peaks of approximately 0.20 and 0.17 ms(-2) occurred at 5 and 3.2 Hz respectively.

  16. When Machines Design Machines!

    DEFF Research Database (Denmark)

    2011-01-01

    Until recently we were the sole designers, alone in the driving seat making all the decisions. But, we have created a world of complexity way beyond human ability to understand, control, and govern. Machines now do more trades than humans on stock markets, they control our power, water, gas...... and food supplies, manage our elevators, microclimates, automobiles and transport systems, and manufacture almost everything. It should come as no surprise that machines are now designing machines. The chips that power our computers and mobile phones, the robots and commercial processing plants on which we...... depend, all are now largely designed by machines. So what of us - will be totally usurped, or are we looking at a new symbiosis with human and artificial intelligences combined to realise the best outcomes possible. In most respects we have no choice! Human abilities alone cannot solve any of the major...

  17. Ethical issues in cardiopulmonary resuscitation.

    Science.gov (United States)

    Holm, S; Jørgensen, E O

    2001-08-01

    If patients are to benefit from resuscitation, they must regain consciousness and their full faculties. In recent years, we have acquired important information about the natural history of neurological recovery from circulatory arrest. There are clinical tests that predict the outcome, both during ongoing cardiopulmonary resuscitation (CPR) and in the period after restoration of spontaneous circulation. The ability to predict neurological outcome at this stage offers a basis for certain ethical considerations, which are not exclusively centered on "do-not-attempt-resuscitation" (DNAR)- orders. Instead of being forced to make the decision that "I do not want CPR", the patient should be able to decide that "I want resuscitation to be discontinued, if you predict that I will not recover to a level of neurological function that is acceptable to me". Ideally, no competent patient should be given a DNAR-status without his or her consent. No CPR-attempt should be stopped, and no treatment decision for a patient recovering after CPR should be taken without knowing and assessing the available information. Good ethical decision-making requires reliable facts, which we now know are available.

  18. [Cardiopulmonary bypass in cardiac surgery].

    Science.gov (United States)

    Baehner, T; Boehm, O; Probst, C; Poetzsch, B; Hoeft, A; Baumgarten, G; Knuefermann, P

    2012-10-01

    Cardiopulmonary bypass (CPB) is a standard procedure in cardiac surgery; however, apart from its therapeutic options a CPB might also initiate systemic and organ-specific complications, such as heart failure, renal and pulmonary dysfunction, impaired coagulation as well as neurological and cognitive dysfunction. The immunological response to the extracorporeal circulation generates systemic inflammation which often meets the definition of systemic inflammatory response syndrome (SIRS). The main inducers of SIRS are contact of blood with the artificial surfaces of the CPB, mechanical stress which affects the blood components and the extensive surgical trauma. Hence, a number of technical and surgical developments aim at reduction of the inflammatory response caused by the CPB. By reason of surgical demands, the majority of cardiothoracic procedures still depend on the use of CPB; however, there is an on-going development of new techniques trying to reduce the surgical trauma and the negative consequences of CPB. Here, minimized systems with biocompatible surfaces have been shown to be effective in attenuating the inflammatory response to CPB. Alternative procedures such as off-pump surgery may help to avoid CPB-associated complications but due to specific limitations will not replace conventional bypass surgery.

  19. A method of automatic control procedures cardiopulmonary resuscitation

    Science.gov (United States)

    Bureev, A. Sh.; Zhdanov, D. S.; Kiseleva, E. Yu.; Kutsov, M. S.; Trifonov, A. Yu.

    2015-11-01

    The study is to present the results of works on creation of methods of automatic control procedures of cardiopulmonary resuscitation (CPR). A method of automatic control procedure of CPR by evaluating the acoustic data of the dynamics of blood flow in the bifurcation of carotid arteries and the dynamics of air flow in a trachea according to the current guidelines for CPR is presented. Evaluation of the patient is carried out by analyzing the respiratory noise and blood flow in the interspaces between the chest compressions and artificial pulmonary ventilation. The device operation algorithm of automatic control procedures of CPR and its block diagram has been developed.

  20. The modernisation of the hoisting machine control systems in terms of the problems related to the operation reliability

    Energy Technology Data Exchange (ETDEWEB)

    Pytel, B. [Knurow Colliery, Knurow (Poland)

    1996-12-31

    After outlining the importance of hoisting reliability, the paper presents methods for improving reliability by implementing redundancy techniques. The study covers software redundancy as well as static, dynamic and hybrid redundancy. On the basis of presented material, some of the issues that should be taken into consideration at the initial stage of the negotiations with companies which offer these systems to the potential user of the computer control system of hoisting machines are indicated. 5 refs., 6 figs.

  1. LHCb: Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC

    CERN Multimedia

    Lieng, M H; Corti, G; Talanov, V

    2010-01-01

    We consider the formation of machine background induced by proton losses in the long straight section of the LHCb experiment at LHC. Both sources showering from the tertiary collimators located in the LHCb insertion region as well as local beam-gas interaction are taken into account. We present the procedure for, and results of, numerical studies of such background for various conditions. Additionally expected impact and on the experiment and signal characteristics are discussed.

  2. Hinged Shields for Machine Tools

    Science.gov (United States)

    Lallande, J. B.; Poland, W. W.; Tull, S.

    1985-01-01

    Flaps guard against flying chips, but fold away for tool setup. Clear plastic shield in position to intercept flying chips from machine tool and retracted to give operator access to workpiece. Machine shops readily make such shields for own use.

  3. Analysis of capacitive effect and life estimation of hydrodynamic journal bearings on repeated starts and stops of a machine operating under the influence of shaft voltages

    Science.gov (United States)

    Prashad, Har; Rao, K. N.

    1994-07-01

    A theoretical analysis has been carried out to study the capacitive effect and life estimation of hydrodynamic journal bearings on repeated starts and stops of a machine operating under the influence of shaft voltages. The analysis gives the time required for the charge accumulation and increase of charge with time on the liner surface of a journal bearing based on bearing capacitance, resistance of film thickness, and the shaft voltage. Also, it investigates the effect of gradual leakage of the accumulated charges with time as the shaft voltage falls when the power supply to the machine is switched off. This paper gives an approach to determine the ratio of the number of shaft revolutions required for charge accumulation and gradual discharge of the accumulated charges on the liner surface of a bearing depending on bearing-to-shaft voltage. Also, the number of repeated starts and stops before initiation of craters on the liner surface of a hydrodynamic journal bearing is established to restrict deterioration and damage of the liner. The diagnosis has the potential to study the transient effect of the shaft voltages on a journal bearing during the start and stop cycle of a machine.

  4. Development of the roller pump for use in the cardiopulmonary bypass circuit.

    Science.gov (United States)

    Cooley, D A

    1987-06-01

    In 1937, John Gibbon proposed his concept of extracorporeal circulation as an aid to cardiac surgery. Subsequently, a number of different types of pumps were tried in the extracorporeal circuit. Today, the pump used most often is a positive displacement twin roller pump, originally patented by Porter and Bradley in 1855. The rotary pump has undergone some minor modifications prior to its use in clinical cardiopulmonary bypass. Cardiovascular surgeons owe much to Porter and Bradley for an invention that has proved both efficient and effective for cardiopulmonary bypass and has allowed operations on an open heart in a relatively dry, bloodless field.

  5. Successful application of acute cardiopulmonary resuscitation

    Institute of Scientific and Technical Information of China (English)

    Derya ztrk; Erturul Altinbilek; Murat Koyuncu; Bedriye Mge Snmez; ilem altili; Ibrahim Ikzcel; Cemil Kavalci; Glsm Kavalci

    2015-01-01

    Objective: To compare the quality and correct the deficiencies of cardiopulmonary resuscitation (CPR) procedures performed in patients who developed cardiopulmonary cardiopulmonary arrest before or after Emergency Department admission. Methods: This study was conducted on patients who were applied CPR atŞŞişli Etfal Training and Research and Research Hospital, Emergency Department between 01 January 2012 and 31 December 2012. Chi-square and Mann-Whitney U test were used to compare the patients' data. The study data were analyzed in SPSS 18.0 software package. A P value less than 0.05 was considered statistically significant. Results: A total of 155 patients who were applied CPR were included in the analysis. Among the study patients, seventy eight (50.3%) were brought to Emergency Department after developing cardiopulmonary arrest while 77 (49.7%) developed cardiopulmonary arrest at Emergency Department. The mean age of the study population was (66 ± 16) years and 64%of the patients were male. The initial rhythms of the CPR-applied patients were different (P 0.05). The CPR response time was longer in ED (P Conclusions: The scientific data obtained in this study suggest that an early response and therapy improves outcomes in CPR procedure.

  6. Efficiency and safety of leukocyte filtration during cardiopulmonary bypass for cardiac surgery

    NARCIS (Netherlands)

    Smit, JJJ; de Vries, AJ; Gu, YJ; van Oeveren, W

    1999-01-01

    Background. Leukocyte filtration of systemic blood during cardiopulmonary bypass surgery to reduce post-operative morbidity has not yet been established because of the enormous leukocyte release from the third space. This study was designed to examine the efficiency and safety of leukocyte filtratio

  7. Effects of hypothermic cardiopulmonary bypass on the pharmacodynamics and pharmacokinetics of rocuronium

    NARCIS (Netherlands)

    Smeulers, NJ; Wierda, MKH; vandenBroek, L; Huet, RCGG; Hennis, PJ

    1995-01-01

    Objective: To study the influence of hypothermic cardiopulmonary bypass (CPB) on the pharmacodynamics and pharmacokinetics of rocuronium. Design: Prospective, descriptive study. Setting: Operating room at a university hospital. Participants: Ten ASA class III end IV patients, ranging in age from 35

  8. Coronary artery surgery without cardiopulmonary bypass: usefulness of the surgical blower-humidifier.

    Science.gov (United States)

    Maddaus, M; Ali, I S; Birnbaum, P L; Panos, A L; Salerno, T A

    1992-12-01

    Coronary artery bypass surgery can be performed without cardiopulmonary bypass (CPB). Bleeding obscuring the operative field and hemodilution of shed blood with irrigating saline are some of the drawbacks of this technique. We report the use of a newly developed surgical blower-humidifier (custom made [Research Medical, Inc.]) for improved visualization and facilitation of coronary artery surgery without CPB.

  9. Airway management during cardiopulmonary resuscitation.

    Science.gov (United States)

    Bernhard, Michael; Benger, Jonathan R

    2015-06-01

    This article evaluates the latest scientific evidence regarding airway management during in-hospital and out-of-hospital cardiopulmonary resuscitation (CPR). In the in-hospital setting, observational research suggested that the quality of CPR using 'no flow ratio' as a surrogate marker was improved when advanced airway techniques were used. A registry study demonstrated that an initial failed intubation attempt was associated with an average delay of 3 min in time to return of spontaneous circulation. A prospective observational study showed that the Glide Scope videolaryngoscope was associated with a first-pass success rate of 93%, with no differences between less and more experienced physicians. In the out-of-hospital setting, a registry study suggested that intubation leads to a better outcome compared with supraglottic airway devices. However, no advanced airway devices showed a better outcome than basic airway techniques. An observational study reported that the i-gel supraglottic airway device offers a first-pass insertion success rate of 90%, and was easier to establish than the Portex Soft Seal laryngeal mask airway. Other out-of-hospital observational studies showed that the laryngeal tube offers a lower first-pass insertion success rate than expected, and complications of this device may influence later definitive airway management and the outcome as a whole. Recent studies of airway management during CPR rely mostly on registry and observational designs. Prospective randomized trials are needed to determine the optimal approach to airway management during cardiac arrest, but have not yet been completed.

  10. 21 CFR 868.6175 - Cardiopulmonary emergency cart.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary emergency cart. 868.6175 Section... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Miscellaneous § 868.6175 Cardiopulmonary emergency cart. (a) Identification. A cardiopulmonary emergency cart is a device intended to store and...

  11. 21 CFR 870.4430 - Cardiopulmonary bypass intracardiac suction control.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass intracardiac suction....4430 Cardiopulmonary bypass intracardiac suction control. (a) Identification. A cardiopulmonary bypass intracardiac suction control is a device which provides the vacuum and control for a cardiotomy return sucker...

  12. Impact of Obesity on Cardiopulmonary Disease.

    Science.gov (United States)

    Chandler, Marjorie L

    2016-09-01

    Although there are known detrimental effects of obesity on the heart and lungs, few data exist showing obesity as risk factor for cardiopulmonary disorders in dogs and cats. It is probable that increased abdominal fat is detrimental as it is in humans, and there is evidence of negative effects of increased intrathoracic fat. As well as physical effects of fat, increased inflammatory mediators and neurohormonal effects of obesity likely contribute to cardiopulmonary disorders. Weight loss in overweight individuals improves cardiac parameters and exercise tolerance. Obesity in patients with obstructive airway disorders is recognized to increase disease severity.

  13. Virtual machine vs Real Machine: Security Systems

    Directory of Open Access Journals (Sweden)

    Dr. C. Suresh Gnana Das

    2009-08-01

    Full Text Available This paper argues that the operating system and applications currently running on a real machine should relocate into a virtual machine. This structure enables services to be added below the operating system and to do so without trusting or modifying the operating system or applications. To demonstrate the usefulness of this structure, we describe three services that take advantage of it: secure logging, intrusion prevention and detection, and environment migration. In particular, we can provide services below the guest operating system without trusting or modifying it. We believe providing services at this layer are especially useful for enhancing security and mobility. This position paper describes the general benefits and challenges that arise from running most applications in a virtual machine, and then describes some example services and alternative ways to provide those services.

  14. Machine Protection

    CERN Document Server

    Schmidt, R

    2014-01-01

    The protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent. It is related to the increasing beam power of high-power proton accelerators such as ISIS, SNS, ESS and the PSI cyclotron, to the emission of synchrotron light by electron–positron accelerators and FELs, and to the increase of energy stored in the beam (in particular for hadron colliders such as LHC). Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping the beam at low energy) and an ...

  15. LHC Report: machine development

    CERN Multimedia

    Rogelio Tomás García for the LHC team

    2015-01-01

    Machine development weeks are carefully planned in the LHC operation schedule to optimise and further study the performance of the machine. The first machine development session of Run 2 ended on Saturday, 25 July. Despite various hiccoughs, it allowed the operators to make great strides towards improving the long-term performance of the LHC.   The main goals of this first machine development (MD) week were to determine the minimum beam-spot size at the interaction points given existing optics and collimation constraints; to test new beam instrumentation; to evaluate the effectiveness of performing part of the beam-squeezing process during the energy ramp; and to explore the limits on the number of protons per bunch arising from the electromagnetic interactions with the accelerator environment and the other beam. Unfortunately, a series of events reduced the machine availability for studies to about 50%. The most critical issue was the recurrent trip of a sextupolar corrector circuit –...

  16. Processing Code and Maintenance and Safety Operation for CNC Machining Center%CNC加工中心加工守则及维护保养与安全操作

    Institute of Scientific and Technical Information of China (English)

    罗昊

    2012-01-01

    介绍了CNC加工中心加工工艺守则,CNC加工中心保养规程,以及CNC加工中心安全技术操作规程。希望对CNC加工人员有一些帮助。%This paper Introduced the CNC machining center processing code, CNC machining center maintenance procedures, as well as CNC machining center safe technical operation rules. Hoped it has some helps for to CNC processing person.

  17. Acute posthypoxic myoclonus after cardiopulmonary resuscitation

    NARCIS (Netherlands)

    Bouwes, Aline; van Poppelen, Daniel; Koelman, Johannes H. T. M.; Kuiper, Michael A.; Zandstra, Durk F.; Weinstein, Henry C.; Tromp, Selma C.; Zandbergen, Eveline G. J.; Tijssen, Marina A. J.; Horn, Janneke

    2012-01-01

    Background: Acute posthypoxic myoclonus (PHM) can occur in patients admitted after cardiopulmonary resuscitation (CPR) and is considered to have a poor prognosis. The origin can be cortical and/or subcortical and this might be an important determinant for treatment options and prognosis. The aim of

  18. Physiological consequences : Cardiopulmonary, vestibular, and sensory aspects

    NARCIS (Netherlands)

    Welsch, H.; Albery, W.; Banks, R.D.; Bles, W.

    2000-01-01

    Discussing the physiological consequences of enhanced fighter manoeuvrability (EFM), aspects of cardiopulmonary reactions will be seen during high G manoeuvres, especially the combination of negative G-load followed by high G-onset manoeuvres ("push-pull"). The aircraft's capability to reach high al

  19. 无刷双馈电机电动状态下的能量分析%Power flow in brushless doubly-fed machine under motor operation

    Institute of Scientific and Technical Information of China (English)

    章玮

    2000-01-01

    无刷双馈电机作为一种新颖电机,无论是电机结构还是运行特性都有其特殊性。从电机稳态模型出发,分析了无刷双馈电机作为调速电动机在各种不同转速范围内定、转子间的能量传递关系,为无刷双馈电机的绕组容量设计以及变频器容量的选择方面提供依据。%As a new type motor,Brushless Double-Fed Machine(BDFM) has shown specialties in its structure and operational characteristic.Based on theN steady-state model of the BDFM,this paper discusses the power flow in the two stator windings and the rotor circuit under different speed ranges.The results obtained offer the theoretical basis for machine's de-sign and selecting the capacity of converter.

  20. Decomposition of forging dies for machining planning

    CERN Document Server

    Tapie, Laurent; Anselmetti, Bernard

    2009-01-01

    This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outstanding process planning.

  1. Decomposition of forging dies for machining planning

    OpenAIRE

    Tapie, Laurent; Mawussi, Kwamiwi; Anselmetti, Bernard

    2009-01-01

    International audience; This paper will provide a method to decompose forging dies for machining planning in the case of high speed machining finishing operations. This method lies on a machining feature approach model presented in the following paper. The two main decomposition phases, called Basic Machining Features Extraction and Process Planning Generation, are presented. These two decomposition phases integrates machining resources models and expert machining knowledge to provide an outs...

  2. Machinability evaluation of machinable ceramics with fuzzy theory

    Institute of Scientific and Technical Information of China (English)

    YU Ai-bing; ZHONG Li-jun; TAN Ye-fa

    2005-01-01

    The property parameters and machining output parameters were selected for machinability evaluation of machinable ceramics. Based on fuzzy evaluation theory, two-stage fuzzy evaluation approach was applied to consider these parameters. Two-stage fuzzy comprehensive evaluation model was proposed to evaluate machinability of machinable ceramic materials. Ce-ZrO2/CePO4 composites were fabricated and machined for evaluation of machinable ceramics. Material removal rates and specific normal grinding forces were measured. The parameters concerned with machinability were selected as alternative set. Five grades were chosen for the machinability evaluation of machnable ceramics. Machinability grades of machinable ceramics were determined through fuzzy operation. Ductile marks are observed on Ce-ZrO2/CePO4 machined surface. Five prepared Ce-ZrO2/CePO4 composites are classified as three machinability grades according to the fuzzy comprehensive evaluation results. The machinability grades of Ce-ZrO2/CePO4 composites are concerned with CePO4 content.

  3. History of the evolution of cardiopulmonary resuscitation

    Directory of Open Access Journals (Sweden)

    George Karlis

    2013-04-01

    Full Text Available Cardiopulmonary resuscitation (CPR is as old as humankind. The evolution of CPR represents a combination of human errors and discoveries. Aim: The present study reviews the most important moments in the history of resuscitation, from the first attempts of CPR until now. Methods: The methodology followed included bibliography research from review literature, through databases PubMed, Medline, Scopus, with the use of keywords, such as cardiopulmonary arrest, cardiopulmonary resuscitation, history, evolution and combinations of them. Complementary bibliography was found through the library of the National and Kapodistrian University of Athens. Results: The first historical references on CPR go back to the era of Ancient Egypt (3100 B.C.. Although the technique for mouth to mouth ventilation was known in ancient times, its efficacy was demonstrated just in 1958. The ease and efficacy of chest compressions were demonstrated in 1960. Electrical defibrillation may have begun in 1775, but it was applied to a victim of cardiac arrest in the 1950s. Conclusion: CPR is currently a rapidly evolving field of medical science. According to latest data, there is evidence that high quality chest compressions, prompt defibrillation if applicable and treatment of reversible causes improve Cardiopulmonary resuscitation (CPR is as old as humankind. The evolution of CPR represents a combination of human errors and discoveries. Aim: The present study reviews the most important moments in the history of resuscitation, from the first attempts of CPR until now. Methods: The methodology followed included bibliography research from review literature, through databases PubMed, Medline, Scopus, with the use of keywords, such as cardiopulmonary arrest, cardiopulmonary resuscitation, history, evolution and combinations of them. Complementary bibliography was found through the library of the National and Kapodistrian University of Athens. Results: The first historical references

  4. Machine Translation

    Institute of Scientific and Technical Information of China (English)

    张严心

    2015-01-01

    As a kind of ancillary translation tool, Machine Translation has been paid increasing attention to and received different kinds of study by a great deal of researchers and scholars for a long time. To know the definition of Machine Translation and to analyse its benefits and problems are significant for translators in order to make good use of Machine Translation, and helpful to develop and consummate Machine Translation Systems in the future.

  5. Machine intelligence and signal processing

    CERN Document Server

    Vatsa, Mayank; Majumdar, Angshul; Kumar, Ajay

    2016-01-01

    This book comprises chapters on key problems in machine learning and signal processing arenas. The contents of the book are a result of a 2014 Workshop on Machine Intelligence and Signal Processing held at the Indraprastha Institute of Information Technology. Traditionally, signal processing and machine learning were considered to be separate areas of research. However in recent times the two communities are getting closer. In a very abstract fashion, signal processing is the study of operator design. The contributions of signal processing had been to device operators for restoration, compression, etc. Applied Mathematicians were more interested in operator analysis. Nowadays signal processing research is gravitating towards operator learning – instead of designing operators based on heuristics (for example wavelets), the trend is to learn these operators (for example dictionary learning). And thus, the gap between signal processing and machine learning is fast converging. The 2014 Workshop on Machine Intel...

  6. Sustainable machining

    CERN Document Server

    2017-01-01

    This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

  7. A Comparison of a Machine Learning Model with EuroSCORE II in Predicting Mortality after Elective Cardiac Surgery: A Decision Curve Analysis.

    Science.gov (United States)

    Allyn, Jérôme; Allou, Nicolas; Augustin, Pascal; Philip, Ivan; Martinet, Olivier; Belghiti, Myriem; Provenchere, Sophie; Montravers, Philippe; Ferdynus, Cyril

    2017-01-01

    The benefits of cardiac surgery are sometimes difficult to predict and the decision to operate on a given individual is complex. Machine Learning and Decision Curve Analysis (DCA) are recent methods developed to create and evaluate prediction models. We conducted a retrospective cohort study using a prospective collected database from December 2005 to December 2012, from a cardiac surgical center at University Hospital. The different models of prediction of mortality in-hospital after elective cardiac surgery, including EuroSCORE II, a logistic regression model and a machine learning model, were compared by ROC and DCA. Of the 6,520 patients having elective cardiac surgery with cardiopulmonary bypass, 6.3% died. Mean age was 63.4 years old (standard deviation 14.4), and mean EuroSCORE II was 3.7 (4.8) %. The area under ROC curve (IC95%) for the machine learning model (0.795 (0.755-0.834)) was significantly higher than EuroSCORE II or the logistic regression model (respectively, 0.737 (0.691-0.783) and 0.742 (0.698-0.785), p machine learning model, in this monocentric study, has a greater benefit whatever the probability threshold. According to ROC and DCA, machine learning model is more accurate in predicting mortality after elective cardiac surgery than EuroSCORE II. These results confirm the use of machine learning methods in the field of medical prediction.

  8. Measuring laser power as a force: a new paradigm to accurately monitor optical power during laser-based machining operations

    Science.gov (United States)

    Williams, Paul; Simonds, Brian; Sowards, Jeffrey; Hadler, Joshua

    2016-03-01

    In laser manufacturing operations, accurate measurement of laser power is important for product quality, operational repeatability, and process validation. Accurate real-time measurement of high-power lasers, however, is difficult. Typical thermal power meters must absorb all the laser power in order to measure it. This constrains power meters to be large, slow and exclusive (that is, the laser cannot be used for its intended purpose during the measurement). To address these limitations, we have developed a different paradigm in laser power measurement where the power is not measured according to its thermal equivalent but rather by measuring the laser beam's momentum (radiation pressure). Very simply, light reflecting from a mirror imparts a small force perpendicular to the mirror which is proportional to the optical power. By mounting a high-reflectivity mirror on a high-sensitivity force transducer (scale), we are able to measure laser power in the range of tens of watts up to ~ 100 kW. The critical parameters for such a device are mirror reflectivity, angle of incidence, and scale sensitivity and accuracy. We will describe our experimental characterization of a radiation-pressure-based optical power meter. We have tested it for modulated and CW laser powers up to 92 kW in the laboratory and up to 20 kW in an experimental laser welding booth. We will describe present accuracy, temporal response, sources of measurement uncertainty, and hurdles which must be overcome to have an accurate power meter capable of routine operation as a turning mirror within a laser delivery head.

  9. Combined ultrafiltration can attenuate lung injury duing cardiopulmonary bypass after cardioac operation in low weight infants%联合超滤减轻体外循环对低体质量婴儿心脏手术后的肺损伤

    Institute of Scientific and Technical Information of China (English)

    胡卫; 马瑞彦; 刘梅; 彭莉; 杨宗英; 肖娟; 肖颖彬; 陈林; 王学峰; 郝嘉; 陈劲进; 陈柏成; 王咏; 程伟

    2011-01-01

    Objective To compare the effects of combined ultrafiltration and conventional ultrafiltration in protecting patients'pulmonary function duing cardiopulmonary bypass of infants. Methods Forty infantile cardiac surgery patients(weight less than 6 kg)were divided into two groups:combined ultrafiltration group(n = 20)and conventional ultrafiltration group(n = 20). Combined ultrafiltration group did zero balanced ultrafiltration, conventional ultrafiltration and modified ultrafiltration in turn. Conventional group only did conventional ultrafiltration. The volume of ultrafiltration, hematocrit(HCT), concentration of serum album before/ after ultrafiltration were observed. The pulmonary function parameters after the operation, such as oxygenation index, alveolar-arte rial oxygen difference(A-aDO2), static lung compliance, ventilator time and ICU stay time, were respectively monitored. Results Comparing with the conventional group, the blood volume needed in the operation was significantly less, HCT and concentration of serum album in after operration were significantly much increased in the combined ultrafiltration group. The improvement of lung ventilation and gas exchange in the combined ultrafiltration group were significantly obvious than that in the conventional group. In the combined ultrafiltration group, the count of white blood cell, neutrophilic granulocyte after operation and other inflammatory mediators were significantly lower than those in conventional ultrafiltration. For the combined ultrafiltration group, the improvement of lung function was more obvious,especially to the low age and weight infants. Conclusion Combined ultrafiltration has more effictive in protecting patients' pulmonary function duing cardiopulmonary bypass of infants compared with conventional ultrafiltration, especially to the low age and weight infant.%目的 对比研究体外循环(CPB)中联合超滤方法和常规超滤方法对低龄低体质量婴幼儿心脏手

  10. Rise of the machines: first year operations of the Robo-AO visible-light laser-adaptive optics instrument

    CERN Document Server

    Baranec, Christoph; Law, Nicholas M; Ramaprakash, A N; Tendulkar, Shriharsh; Hogstrom, Kristina; Bui, Khanh; Burse, Mahesh; Chordia, Pravin; Das, Hillol; Dekany, Richard; Kulkarni, Shrinivas; Punnadi, Sujit; Smith, Roger

    2013-01-01

    Robo-AO is the first autonomous laser adaptive optics system and science instrument operating on sky. With minimal human oversight, the system robotically executes large scale surveys, monitors long-term astrophysical dynamics and characterizes newly discovered transients, all at the visible diffraction limit. The average target-to target operational overhead, including slew time, is a mere 86 s, enabling up to ~20 observations per hour. The first of many envisioned systems went live in June 2012, and has since finished 78 nights of science observing at the Palomar Observatory 60-inch (1.5 m) telescope, with over 9,000 robotic observations executed as of August 2013. The system will be augmented in 2014 with a low-noise wide field infrared camera, which will double as a tip-tilt sensor, to widen the spectral bandwidth of observations, increase available sky coverage as well as enable deeper visible imaging using adaptive-optics sharpened infrared tip-tilt guide sources.

  11. Rise of The Machines: First Year Operations of The Robo-AO Visible-Light Laser-Adaptive-Optics Instrument

    Science.gov (United States)

    Baranec, C.; Riddle, R.; Law, N.; Ramaprakash, A. N.; Tendulkar, S.; Hogstrom, K.; Bui, K.; Burse, M.; Chordia, P.; Das, H.; Dekany, R.

    2013-09-01

    Robo-AO is the first autonomous laser adaptive optics system and science instrument operating on sky. With minimal human oversight, the system robotically executes large scale surveys, monitors long-term astrophysical dynamics and characterizes newly discovered transients, all at the visible diffraction limit. The average target-to-target operational overhead, including slew time, is a mere 86 s, enabling up to ~200 observations per night. The first of many envisioned systems went live in June 2012, and has since finished 51 nights of science observing at the Palomar Observatory 60-inch (1.5 m) telescope, with over 5,600 robotic observations executed as of March 2013. The system will be augmented in late 2013 with a low-noise wide field infrared camera, which will double as a tip-tilt sensor, to widen the spectral bandwidth of observations, increase available sky coverage as well as enable deeper visible imaging using adaptive-optics sharpened infrared tip-tilt guide sources.

  12. Machine function based control code algebras

    NARCIS (Netherlands)

    Bergstra, J.A.

    2008-01-01

    Machine functions have been introduced by Earley and Sturgis in [6] in order to provide a mathematical foundation of the use of the T-diagrams proposed by Bratman in [5]. Machine functions describe the operation of a machine at a very abstract level. A theory of hardware and software based on machin

  13. Singer CNC sewing and embroidery machine

    Directory of Open Access Journals (Sweden)

    Lokodi Zsolt

    2011-12-01

    Full Text Available This paper presents the adaptation of a classic foot pedal operated Singer sewing machine to a computerized numerical control (CNC sewing and embroidery machine. This machine is composed of a Singer sewing machine and a two-degrees-of-freedom XY stage designed specifically for this application. The whole system is controlled from a PC using adequate CNC control software.

  14. Predictors of Post-operative Mycetoma Recurrence Using Machine-Learning Algorithms: The Mycetoma Research Center Experience.

    Science.gov (United States)

    Wadal, Ali; Elhassan, Tusneem Ahmed; Zein, Hajer Ahmed; Abdel-Rahman, Manar Elsheikh; Fahal, Ahmed Hassan

    2016-10-01

    Post-operative recurrence in mycetoma after adequate medical and surgical treatment is common and a serious problem. It has health, socio-economic and psychological detrimental effects on patients and families. It is with this in mind, we set out to determine the predictors of post-operative recurrence in mycetoma. The study included 1013 patients with Madurella mycetomatis causing eumycetoma who underwent surgical excision at the Mycetoma Research Centre, Khartoum, Sudan in the period 1991-2015. The clinical records of these patients were reviewed and relevant information was collected using a pre-designed data collection sheet. The study showed, 276 patients (27.2%) of the studied population developed post-operative recurrence, 217 were males (78.6%) and 59 were females (21.4%). Their age ranged between 5 to 70 years with a mean of 32 years. The disease duration at presentation ranged between 2 months and 17 years. The majority of the patients 118 (42.8%) had mycetoma of 1 year duration. In this study, students were the most affected; 105 (38%) followed by workers 70 (25.4%), then farmers 48(17.3%). The majority of the patients were from the Central Sudan 207 (75%), Western Sudan 53 (19.2%) while 11 patients (4%) were from the Northern part. Past history of surgical intervention performed elsewhere was reported in 196 patients (71.1%). Family history of mycetoma was reported in 50 patients (18.1%). The foot was the most affected site, 245 (88.7%), followed by the hand seen in 19 (6.8%) patients and 44 (4.5%) had different sites involvement. Most of the patients 258 (93.5%) had wide local surgical excisions while 18 had major amputation. The model predicted that the certain groups have a high risk of recurrence, and these include patients with disease duration greater than 10 years and extra-pedal mycetoma. Patients with disease duration between [5-10] years, with pedal mycetoma, who had previous surgery, with positive family history and underwent wide local

  15. Predictors of Post-operative Mycetoma Recurrence Using Machine-Learning Algorithms: The Mycetoma Research Center Experience.

    Directory of Open Access Journals (Sweden)

    Ali Wadal

    2016-10-01

    Full Text Available Post-operative recurrence in mycetoma after adequate medical and surgical treatment is common and a serious problem. It has health, socio-economic and psychological detrimental effects on patients and families. It is with this in mind, we set out to determine the predictors of post-operative recurrence in mycetoma. The study included 1013 patients with Madurella mycetomatis causing eumycetoma who underwent surgical excision at the Mycetoma Research Centre, Khartoum, Sudan in the period 1991-2015. The clinical records of these patients were reviewed and relevant information was collected using a pre-designed data collection sheet. The study showed, 276 patients (27.2% of the studied population developed post-operative recurrence, 217 were males (78.6% and 59 were females (21.4%. Their age ranged between 5 to 70 years with a mean of 32 years. The disease duration at presentation ranged between 2 months and 17 years. The majority of the patients 118 (42.8% had mycetoma of 1 year duration. In this study, students were the most affected; 105 (38% followed by workers 70 (25.4%, then farmers 48(17.3%. The majority of the patients were from the Central Sudan 207 (75%, Western Sudan 53 (19.2% while 11 patients (4% were from the Northern part. Past history of surgical intervention performed elsewhere was reported in 196 patients (71.1%. Family history of mycetoma was reported in 50 patients (18.1%. The foot was the most affected site, 245 (88.7%, followed by the hand seen in 19 (6.8% patients and 44 (4.5% had different sites involvement. Most of the patients 258 (93.5% had wide local surgical excisions while 18 had major amputation. The model predicted that the certain groups have a high risk of recurrence, and these include patients with disease duration greater than 10 years and extra-pedal mycetoma. Patients with disease duration between [5-10] years, with pedal mycetoma, who had previous surgery, with positive family history and underwent wide local

  16. Survival after in-hospital Cardiopulmonary Resuscitation

    Directory of Open Access Journals (Sweden)

    M Adib Hajbaghery

    2005-05-01

    Full Text Available Background: During recent years, cardiopulmonary resuscitation (CPR in hospital has received much attention. However, the survival rate of CPR in Iran’s hospitals is unknown. This study was designed to evaluate outcome of in-hospital CPR in Kashan. Methods: A longitudinal case registry study was conducted on all cases of in-hospital CPR during 6 months at 2002. Necessary data including; age, sex, underlying disease, working shift, time from cardiac arrest until initiating of CPR and until defibrillation, duration and result of CPR, frequency of tracheal intubations and time served for it were collected in a checklist. Results: In six months study, 206 cases of cardiopulmonary resuscitation attempted. The survival rate was similar for both sexes. Short-term survival observed in19.9% of cases and only 5.3% survived to discharge. Conclusions: Duration of CPR, time of the first defibrillation, response time and the location of cardiac arrest are the key predictors of survival to hospital discharge and in-hospital CPR strategies require improvement. This study promotes a national study on post CPR survival for accurate data on our performance in attention to chain of survival. KeyWords: Cardiopulmonary Resuscitation (CPR, Survival rate, Iran

  17. Vacuum-assisted drainage in cardiopulmonary bypass: advantages and disadvantages

    Science.gov (United States)

    de Carvalho Filho, Élio Barreto; Marson, Fernando Augusto de Lima; da Costa, Loredana Nilkenes Gomes; Antunes, Nilson

    2014-01-01

    Systematic review of vacuum assisted drainage in cardiopulmonary bypass, demonstrating its advantages and disadvantages, by case reports and evidence about its effects on microcirculation. We conducted a systematic search on the period 1997-2012, in the databases PubMed, Medline, Lilacs and SciELO. Of the 70 selected articles, 26 were included in the review. Although the vacuum assisted drainage has significant potential for complications and requires appropriate technology and professionalism, prevailed in literature reviewed the concept that vacuum assisted drainage contributed in reducing the rate of transfusions, hemodilutions, better operative field, no significant increase in hemolysis, reduced complications surgical, use of lower prime and of smaller diameter cannulas. PMID:25140478

  18. 油茶果脱壳机的设计与工作参数优化%Design of shelling machine forcamellia oleifera fruit and operating parameter optimization

    Institute of Scientific and Technical Information of China (English)

    朱广飞; 任嘉嘉; 王振; 相海; 牟仁生; 李少华

    2016-01-01

    In China,Camellia oleifera fruit is deeply loved by consumers as specific woody oil resource. Because of the composition of fatty acid for camellia seed oil is highly similar to olive oil, it is also known as “Oriental olive oil”. However, the shelling operation ofCamellia oleiferafruit largely relies on natural drying, which is of low efficiency, high labor intensity, high processing cost, and great dependence on weather. In order to improve the performance of shelling machine forCamellia oleiferafruit, increase the shelling rate and reduce the seed breaking rate, choosing the shelling rate and seed breaking rate as the indices, 3 aspects were studied based on the existing shelling equipment and practical engineering experience in this paper. Firstly, the physical parameters ofCamellia oleiferafruit were studied. The parameters such as density, bulk density, grain size, water content and proportion of each component ofCamellia oleiferafruit from Changning City were measured, which provided the data for the design of shelling machine parts. Secondly, the mechanism and main structure of the shelling machine were studied. In the beginning, the merits and defects of commonly-used methods for shelling were summed based on their working principle and mechanism. According to practical engineering experience and the measured data above, the final squeeze-rub shelling method forCamellia oleiferafruit was determined. Then the structure of main parts was designed, which included the shelling device consisting of the roller, annular plate and the regulating mechanism, and the separation device consisting of stirring shaft and circular groove structure screen. Finally, the three-dimensional (3D) prototype model was established and the drawing design was completed. Thirdly, the operating parameters of shelling machine forCamellia oleifera fruit were studied. The shelling machine forCamellia oleiferafruit was manufactured based on the structure design, and then the operating

  19. A marked increase in gastric fluid volume during cardiopulmonary bypass

    OpenAIRE

    2011-01-01

    Major physiological stress occurs during cardiac surgery with cardiopulmonary bypass. This is related to hypothermia and artificial organ perfusion. Thus, serious gastrointestinal complications, particularly upper gastrointestinal bleeding, sometimes follow cardiac surgery. We have compared the antisecretory effects of a preanesthetic H2 antagonist (roxatidine, cardiopulmonary bypass-H2 group, n = 15) and a proton pump inhibitor (rabeprazole, cardiopulmonary bypass-PPI group, n = 15) in patie...

  20. A Reliable Method for Rhythm Analysis during Cardiopulmonary Resuscitation

    Directory of Open Access Journals (Sweden)

    U. Ayala

    2014-01-01

    Full Text Available Interruptions in cardiopulmonary resuscitation (CPR compromise defibrillation success. However, CPR must be interrupted to analyze the rhythm because although current methods for rhythm analysis during CPR have high sensitivity for shockable rhythms, the specificity for nonshockable rhythms is still too low. This paper introduces a new approach to rhythm analysis during CPR that combines two strategies: a state-of-the-art CPR artifact suppression filter and a shock advice algorithm (SAA designed to optimally classify the filtered signal. Emphasis is on designing an algorithm with high specificity. The SAA includes a detector for low electrical activity rhythms to increase the specificity, and a shock/no-shock decision algorithm based on a support vector machine classifier using slope and frequency features. For this study, 1185 shockable and 6482 nonshockable 9-s segments corrupted by CPR artifacts were obtained from 247 patients suffering out-of-hospital cardiac arrest. The segments were split into a training and a test set. For the test set, the sensitivity and specificity for rhythm analysis during CPR were 91.0% and 96.6%, respectively. This new approach shows an important increase in specificity without compromising the sensitivity when compared to previous studies.

  1. A Reliable Method for Rhythm Analysis during Cardiopulmonary Resuscitation

    Science.gov (United States)

    Ayala, U.; Irusta, U.; Ruiz, J.; Eftestøl, T.; Kramer-Johansen, J.; Alonso-Atienza, F.; Alonso, E.; González-Otero, D.

    2014-01-01

    Interruptions in cardiopulmonary resuscitation (CPR) compromise defibrillation success. However, CPR must be interrupted to analyze the rhythm because although current methods for rhythm analysis during CPR have high sensitivity for shockable rhythms, the specificity for nonshockable rhythms is still too low. This paper introduces a new approach to rhythm analysis during CPR that combines two strategies: a state-of-the-art CPR artifact suppression filter and a shock advice algorithm (SAA) designed to optimally classify the filtered signal. Emphasis is on designing an algorithm with high specificity. The SAA includes a detector for low electrical activity rhythms to increase the specificity, and a shock/no-shock decision algorithm based on a support vector machine classifier using slope and frequency features. For this study, 1185 shockable and 6482 nonshockable 9-s segments corrupted by CPR artifacts were obtained from 247 patients suffering out-of-hospital cardiac arrest. The segments were split into a training and a test set. For the test set, the sensitivity and specificity for rhythm analysis during CPR were 91.0% and 96.6%, respectively. This new approach shows an important increase in specificity without compromising the sensitivity when compared to previous studies. PMID:24895621

  2. A Boltzmann machine for the organization of intelligent machines

    Science.gov (United States)

    Moed, Michael C.; Saridis, George N.

    1989-01-01

    In the present technological society, there is a major need to build machines that would execute intelligent tasks operating in uncertain environments with minimum interaction with a human operator. Although some designers have built smart robots, utilizing heuristic ideas, there is no systematic approach to design such machines in an engineering manner. Recently, cross-disciplinary research from the fields of computers, systems AI and information theory has served to set the foundations of the emerging area of the design of intelligent machines. Since 1977 Saridis has been developing an approach, defined as Hierarchical Intelligent Control, designed to organize, coordinate and execute anthropomorphic tasks by a machine with minimum interaction with a human operator. This approach utilizes analytical (probabilistic) models to describe and control the various functions of the intelligent machine structured by the intuitively defined principle of Increasing Precision with Decreasing Intelligence (IPDI) (Saridis 1979). This principle, even though resembles the managerial structure of organizational systems (Levis 1988), has been derived on an analytic basis by Saridis (1988). The purpose is to derive analytically a Boltzmann machine suitable for optimal connection of nodes in a neural net (Fahlman, Hinton, Sejnowski, 1985). Then this machine will serve to search for the optimal design of the organization level of an intelligent machine. In order to accomplish this, some mathematical theory of the intelligent machines will be first outlined. Then some definitions of the variables associated with the principle, like machine intelligence, machine knowledge, and precision will be made (Saridis, Valavanis 1988). Then a procedure to establish the Boltzmann machine on an analytic basis will be presented and illustrated by an example in designing the organization level of an Intelligent Machine. A new search technique, the Modified Genetic Algorithm, is presented and proved

  3. The amylase-creatinine clearance ratio following cardiopulmonary bypass.

    Science.gov (United States)

    Murray, W R; Mittra, S; Mittra, D; Roberts, L B; Taylor, K M

    1981-08-01

    The incidence of unexplained pancreatitis in patients dying after cardiac operations has been recorded as 16%, with evidence to implicate ischemia in the pathogenesis of the pancreatitis. Increased amylase--to--creatinine clearance ratios (ACCR), suggesting pancreatic dysfunction, have been reported in patients following nonpulsatile cardiopulmonary bypass (CPB). Pulsatile CPB is increasingly recognized to be a more physiological form of perfusion, particularly with respect to capillary blood flow. In this study the ACCR has been determined before, during, and after cardiac operations performed with both nonpulsatile and pulsatile CPB. Twenty patients undergoing elective cardiac operations were studied. Ten patients had nonpulsatile CPB (nonpulsatile group) and 10 had pulsatile CPB (pulsatile group). The two groups were comparable as regards perioperative variables and perfusion parameters. In both groups the ACCR was estimated preoperatively, on three occasions during the operation, and daily on the first 5 postoperative days. A significant elevation in ACCR was observed in nine of 10 patients in the nonpulsatile group but in only one of 10 patients in the pulsatile group (p less than 0.001). The significant improvement of ACCR stability following pulsatile CPB may indicate that this form of perfusion will reduce the risk of pancreatitis following cardiac operations performed with CPB.

  4. Methylprednisolone in patients undergoing cardiopulmonary bypass (SIRS): a randomised, double-blind, placebo-controlled trial.

    Science.gov (United States)

    Whitlock, Richard P; Devereaux, P J; Teoh, Kevin H; Lamy, Andre; Vincent, Jessica; Pogue, Janice; Paparella, Domenico; Sessler, Daniel I; Karthikeyan, Ganesan; Villar, Juan Carlos; Zuo, Yunxia; Avezum, Álvaro; Quantz, Mackenzie; Tagarakis, Georgios I; Shah, Pallav J; Abbasi, Seyed Hesameddin; Zheng, Hong; Pettit, Shirley; Chrolavicius, Susan; Yusuf, Salim

    2015-09-26

    Cardiopulmonary bypass initiates a systemic inflammatory response syndrome that is associated with postoperative morbidity and mortality. Steroids suppress inflammatory responses and might improve outcomes in patients at high risk of morbidity and mortality undergoing cardiopulmonary bypass. We aimed to assess the effects of steroids in patients at high risk of morbidity and mortality undergoing cardiopulmonary bypass. The Steroids In caRdiac Surgery (SIRS) study is a double-blind, randomised, controlled trial. We used a central computerised phone or interactive web system to randomly assign (1:1) patients at high risk of morbidity and mortality from 80 hospital or cardiac surgery centres in 18 countries undergoing cardiac surgery with the use of cardiopulmonary bypass to receive either methylprednisolone (250 mg at anaesthetic induction and 250 mg at initiation of cardiopulmonary bypass) or placebo. Patients were assigned with block randomisation with random block sizes of 2, 4, or 6 and stratified by centre. Patients aged 18 years or older were eligible if they had a European System for Cardiac Operative Risk Evaluation of at least 6. Patients were excluded if they were taking or expected to receive systemic steroids in the immediate postoperative period or had a history of bacterial or fungal infection in the preceding 30 days. Patients, caregivers, and those assessing outcomes were masked to allocation. The primary outcomes were 30-day mortality and a composite of death and major morbidity (ie, myocardial injury, stroke, renal failure, or respiratory failure) within 30 days, both analysed by intention to treat. Safety outcomes were also analysed by intention to treat. This study is registered with ClinicalTrials.gov, number NCT00427388. Patients were recruited between June 21, 2007, and Dec 19, 2013. Complete 30-day data was available for all 7507 patients randomly assigned to methylprednisolone (n=3755) and to placebo (n=3752). Methylprednisolone, compared

  5. Risk assessment of mortality for all-cause, ischemic heart disease, cardiopulmonary disease, and lung cancer due to the operation of the world's largest coal-fired power plant

    Science.gov (United States)

    Kuo, Pei-Hsuan; Tsuang, Ben-Jei; Chen, Chien-Jen; Hu, Suh-Woan; Chiang, Chun-Ju; Tsai, Jeng-Lin; Tang, Mei-Ling; Chen, Guan-Jie; Ku, Kai-Chen

    2014-10-01

    Based on recent understanding of PM2.5 health-related problems from fossil-fueled power plants emission inventories collected in Taiwan, we have determined the loss of life expectancy (LLE) and the lifetime (75-year) risks for PM2.5 health-related mortalities as attributed to the operation of the world's largest coal-fired power plant; the Taichung Power Plant (TCP), with an installed nominal electrical capacity of 5780 MW in 2013. Five plausible scenarios (combinations of emission controls, fuel switch, and relocation) and two risk factors were considered. It is estimated that the lifetime (75-y) risk for all-cause mortality was 0.3%-0.6% for males and 0.2%-0.4% for females, and LLE at 84 days in 1997 for the 23 million residents of Taiwan. The risk has been reduced to one-fourth at 0.05%-0.10% for males and 0.03%-0.06% for females, and LLE at 15 days in 2007, which was mainly attributed to the installation of desulfurization and de-NOx equipment. Moreover, additional improvements can be expected if we can relocate the power plant to a downwind site on Taiwan, and convert the fuel source from coal to natural gas. The risk can be significantly reduced further to one-fiftieth at 0.001%-0.002% for males and 0.001% for females, and LLE at 0.3 days. Nonetheless, it is still an order higher than the commonly accepted elevated-cancer risk at 0.0001% (10-6), indicating that the PM2.5 health-related risk for operating such a world-class power plant is not negligible. In addition, this study finds that a better-chosen site (involving moving the plant to the leeward side of Taiwan) can reduce the risk significantly as opposed to solely transitioning the fuel source to natural gas. Note that the fuel cost of using natural gas (0.11 USD/kWh in 2013) in Taiwan is about twice the price of using coal fuel (0.05 USD/kWh in 2013).

  6. Cardiopulmonary Bypass induced Fever and Systemic inflammatory response syndrome in Paediatric patients: Management Strategy

    OpenAIRE

    Ghatnatti, Ravi; Teli, Anita; Bhattacharya, Shubhankar; Sengupta, Gautam

    2013-01-01

    Cardiopulmonary bypass is considered to be the common culprit for the occurrence of fever in the immediate post-operative period i.e, within 24 hours in pediatric patients. Other common causes contributing to fever are anaesthetic drugs, blood transfusions & pain. This early fever usually manifests as tachy-arrthymias in recovery room requiring interventions. This review intends to know the pathophysiology of fever and systemic inflammatory response syndrome after bypass (SIRAB) onset, pr...

  7. Method and apparatus for monitoring machine performance

    Science.gov (United States)

    Smith, Stephen F.; Castleberry, Kimberly N.

    1996-01-01

    Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

  8. Simple machines

    CERN Document Server

    Graybill, George

    2007-01-01

    Just how simple are simple machines? With our ready-to-use resource, they are simple to teach and easy to learn! Chocked full of information and activities, we begin with a look at force, motion and work, and examples of simple machines in daily life are given. With this background, we move on to different kinds of simple machines including: Levers, Inclined Planes, Wedges, Screws, Pulleys, and Wheels and Axles. An exploration of some compound machines follows, such as the can opener. Our resource is a real time-saver as all the reading passages, student activities are provided. Presented in s

  9. Cardiopulmonary bypass. The effect on blood elements in dogs

    NARCIS (Netherlands)

    Jong, Jeroen Cornelis Frans de

    1985-01-01

    In this thesis the components of the heart-lung machine for CPB operations have been tested for their effects on blood elements. The purpose of the experimental investigation in dogs is: 1. To determine the hematological alterations induced by the various components from which an extracorporeal circ

  10. Cardiopulmonary bypass. The effect on blood elements in dogs

    NARCIS (Netherlands)

    Jong, Jeroen Cornelis Frans de

    1985-01-01

    In this thesis the components of the heart-lung machine for CPB operations have been tested for their effects on blood elements. The purpose of the experimental investigation in dogs is: 1. To determine the hematological alterations induced by the various components from which an extracorporeal

  11. The effect of dynamic operating conditions on nano-particle emissions from a light-duty diesel engine applicable to prime and auxiliary machines on marine vessels

    Directory of Open Access Journals (Sweden)

    Hyungmin Lee

    2012-12-01

    Full Text Available This study presents the nano-sized particle emission characteristics from a small turbocharged common rail diesel engine applicable to prime and auxiliary machines on marine vessels. The experiments were conducted under dynamic engine operating conditions, such as steady-state, cold start, and transient conditions. The particle number and size distributions were analyzed with a high resolution PM analyzer. The diesel oxidation catalyst (DOC had an insignificant effect on the reduction in particle number, but particle number emissions were drastically reduced by 3 to 4 orders of magnitude downstream of the diesel particulate filter (DPF at various steady conditions. Under high speed and load conditions, the particle filtering efficiency was decreased by the partial combustion of trapped particles inside the DPF because of the high exhaust temperature caused by the increased particle number concentration. Retarded fuel injection timing and higher EGR rates led to increased particle number emissions. As the temperature inside the DPF increased from 25 °C to 300 °C, the peak particle number level was reduced by 70% compared to cold start conditions. High levels of nucleation mode particle generation were found in the deceleration phases during the transient tests.

  12. Software for interpreting cardiopulmonary exercise tests

    Directory of Open Access Journals (Sweden)

    Corry David B

    2007-10-01

    Full Text Available Abstract Background Cardiopulmonary exercise testing (CPET has become an important modality for the evaluation and management of patients with a diverse array of medical problems. However, interpreting these tests is often difficult and time consuming, requiring significant expertise. Methods We created a computer software program (XINT that assists in CPET interpretation. The program uses an integrative approach as recommended in the Official Statement of the American Thoracic Society/American College of Chest Physicians (ATS/ACCP on Cardiopulmonary Exercise Testing. In this paper we discuss the principles behind the software. We also provide the detailed logic in an accompanying file (Additional File 1. The actual program and the open source code are also available free over the Internet at http://www.xint.org. For convenience, the required download files can also be accessed from this article. Additional file 1 XINTlogic. This file provides the detailed logic used by the XINT program. The variable names are described in Table 1. The actual source code may also be read directly simply by opening the source code with a text editor. Click here for file Results To test the clinical usefulness of XINT, we present the computer generated interpretations of the case studies discussed in the ATS/ACCP document in another accompanying file (Additional File 2. We believe the interpretations are consistent with the document's criteria and the interpretations given by the expert panel. Additional file 2 XINTinterpretations. These are the XINT generated reports based on the five examples provided in the ATS/ACCP statement on cardiopulmonary exercise testing 1. Click here for file Conclusion Computers have become an integral part of modern life. Peer-reviewed scientific journals are now able to present not just medical concepts and experimental studies, but actual functioning medical interpretive software. This has enormous potential to improve medical

  13. Machine musicianship

    Science.gov (United States)

    Rowe, Robert

    2002-05-01

    The training of musicians begins by teaching basic musical concepts, a collection of knowledge commonly known as musicianship. Computer programs designed to implement musical skills (e.g., to make sense of what they hear, perform music expressively, or compose convincing pieces) can similarly benefit from access to a fundamental level of musicianship. Recent research in music cognition, artificial intelligence, and music theory has produced a repertoire of techniques that can make the behavior of computer programs more musical. Many of these were presented in a recently published book/CD-ROM entitled Machine Musicianship. For use in interactive music systems, we are interested in those which are fast enough to run in real time and that need only make reference to the material as it appears in sequence. This talk will review several applications that are able to identify the tonal center of musical material during performance. Beyond this specific task, the design of real-time algorithmic listening through the concurrent operation of several connected analyzers is examined. The presentation includes discussion of a library of C++ objects that can be combined to perform interactive listening and a demonstration of their capability.

  14. [Clinical relevance of cardiopulmonary reflexes in anesthesiology].

    Science.gov (United States)

    Guerri-Guttenberg, R A; Siaba-Serrate, F; Cacheiro, F J

    2013-10-01

    The baroreflex, chemoreflex, pulmonary reflexes, Bezold-Jarisch and Bainbridge reflexes and their interaction with local mechanisms, are a demonstration of the richness of cardiovascular responses that occur in human beings. As well as these, the anesthesiologist must contend with other variables that interact by attenuating or accentuating cardiopulmonary reflexes such as, anesthetic drugs, surgical manipulation, and patient positioning. In the present article we review these reflexes and their clinical relevance in anesthesiology. Copyright © 2012 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Published by Elsevier España. All rights reserved.

  15. Cardiopulmonary resuscitation: how far have we come?

    Science.gov (United States)

    Whitcomb, John J; Blackman, Virginia Schmied

    2007-01-01

    In the 43 years since it was first described, cardiopulmonary resuscitation (CPR) has grown from an obscure medical theory to a basic first aid skill taught to adults and is now the near-universal technique used in CPR instruction. This article provides insight into the history of CPR. We explore the phenomenon of sudden cardiac arrest, the historical roots of CPR, current practice data and recommendations, and the society's role in the development of this life-saving technique. We conclude with a review of CPR's economic impact on the healthcare system and the ethical and policy issues surrounding CPR.

  16. Setup Aid for Electrical-Discharge Machining

    Science.gov (United States)

    Lines, G.; Duca, J.

    1985-01-01

    Interlock assures that workpiece is correctly assembled in machining fixture. A Plunger in a Hollow Shaft actuates a switch, allowing a power supply to produce current for electrical-discharge machining. Plunger operates only when necessary parts are position.

  17. Normal values for cardiopulmonary exercise testing in children

    NARCIS (Netherlands)

    ten Harkel, A.D.J.; Takken, T.; van Osch-Gevers, M.; Helbing, W.A.

    BACKGROUND: A reference set of data of normal values of newly developed cardiopulmonary parameters of exercise testing in an 8-18-year-old population is lacking. PATIENTS AND METHODS: Cardiopulmonary exercise testing was performed in 175 healthy school children (8-18 years old). Continuous

  18. 21 CFR 870.4240 - Cardiopulmonary bypass heat exchanger.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass heat exchanger. 870.4240... bypass heat exchanger. (a) Identification. A cardiopulmonary bypass heat exchanger is a device, consisting of a heat exchange system used in extracorporeal circulation to warm or cool the blood...

  19. Electric machine

    Science.gov (United States)

    El-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Reddy, Patel Bhageerath [Madison, WI

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  20. 基于人机工程学的机械操作面板设计研究%The machinery operation panel design and study based on man-machine engineering

    Institute of Scientific and Technical Information of China (English)

    孟庆强

    2011-01-01

    Staring from the man-machine interface design concept, fully consider people's factors, the mechanical operation interface design principles and human environment relationship is studied. The operation panel maximum limit match with human body structure. For the operator to create a safe, healthy and comfortable environment. Makes the man-machine system to play out maximum efficiency.%从人机界面设计的概念入手,充分考虑人的因素,对机械操作界面的设计原则和人机环境关系进行了研究,最终使操作面板最大限度地与人体结构相匹配,为操作者创造一个安全、健康、舒适的操作环境,使人机系统发挥出最大的效率.

  1. Predicting postoperative cardio-pulmonary complications by a test of stair climbing.

    Science.gov (United States)

    Salahuddin, Nawal; Fatimi, Saulat; Salahuddin, Nawal; Huda, Shehzad; Islam, Mohammad; Shafquat, Azam

    2005-12-01

    To assess whether a test of stair climbing ability could be used to predict the risk of developing postoperative cardiopulmonary complications in patients undergoing general anesthesia. Cohort study. The Aga Khan University Hospital, Karachi. The duration of the study was from December 2003 to December 2004. This study was carried out on consecutive, adult patients presenting for elective thoracic or abdominal surgery under general anesthesia. Pre-operatively, patients were asked to climb a standard staircase. Number of steps climbed was recorded. Those unable to climb stairs due to debilitating cardiac, pulmonary or rheumatologic disease were categorized as 0 stairs climbed. Outcome variables were postoperative cardiopulmonary complications or mortality. Period of follow-up was until hospital discharge. Seventy-eight patients were enrolled, 59 (75.6%) climbed 1 flight of stairs, 19 (24.3%) climbed climb 1 flight and 40% in those patients who climbed climbed climb at least 1 flight of stairs, was calculated to be 1.8 (95% CI 0.7 - 4.6). Stair climbing can be a useful pre-operative tool to predict the risk of postoperative cardiopulmonary complications.

  2. Assessing Exercise Limitation Using Cardiopulmonary Exercise Testing

    Directory of Open Access Journals (Sweden)

    Michael K. Stickland

    2012-01-01

    Full Text Available The cardiopulmonary exercise test (CPET is an important physiological investigation that can aid clinicians in their evaluation of exercise intolerance and dyspnea. Maximal oxygen consumption (V˙O2max is the gold-standard measure of aerobic fitness and is determined by the variables that define oxygen delivery in the Fick equation (V˙O2 = cardiac output × arterial-venous O2 content difference. In healthy subjects, of the variables involved in oxygen delivery, it is the limitations of the cardiovascular system that are most responsible for limiting exercise, as ventilation and gas exchange are sufficient to maintain arterial O2 content up to peak exercise. Patients with lung disease can develop a pulmonary limitation to exercise which can contribute to exercise intolerance and dyspnea. In these patients, ventilation may be insufficient for metabolic demand, as demonstrated by an inadequate breathing reserve, expiratory flow limitation, dynamic hyperinflation, and/or retention of arterial CO2. Lung disease patients can also develop gas exchange impairments with exercise as demonstrated by an increased alveolar-to-arterial O2 pressure difference. CPET testing data, when combined with other clinical/investigation studies, can provide the clinician with an objective method to evaluate cardiopulmonary physiology and determination of exercise intolerance.

  3. A multipurpose tissue bending machine.

    Science.gov (United States)

    Vesely, I; Boughner, D R

    1985-01-01

    A unique tissue bending machine was developed to test the bending properties of normal and bioprosthetic heart valve material. It can be operated in air or in a tissue bath and can measure bending torques with an accuracy in excess of 1.0 microN m. Three contrasting substances were tested to compare their stiffness and to demonstrate the machine.

  4. Whole-body Vibration Exposure of Drill Operators in Iron Ore Mines and Role of Machine-Related, Individual, and Rock-Related Factors

    Directory of Open Access Journals (Sweden)

    Dhanjee Kumar Chaudhary

    2015-12-01

    Conclusion: Prevention should include using appropriate machines to handle rock hardness, rock uniaxial compressive strength and density, and seat improvement using ergonomic approaches such as including a suspension system.

  5. 21 CFR 870.4210 - Cardiopulmonary bypass vascular catheter, cannula, or tubing.

    Science.gov (United States)

    2010-04-01

    ... Devices § 870.4210 Cardiopulmonary bypass vascular catheter, cannula, or tubing. (a) Identification. A cardiopulmonary bypass vascular catheter, cannula, or tubing is a device used in cardiopulmonary surgery to... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass vascular catheter,...

  6. Associates of Cardiopulmonary Arrest in the Perihemodialytic Period

    Directory of Open Access Journals (Sweden)

    Jennifer E. Flythe

    2014-01-01

    Full Text Available Cardiopulmonary arrest during and proximate to hemodialysis is rare but highly fatal. Studies have examined peridialytic sudden cardiac event risk factors, but no study has considered associates of cardiopulmonary arrests (fatal and nonfatal events including cardiac and respiratory causes. This study was designed to elucidate patient and procedural factors associated with peridialytic cardiopulmonary arrest. Data for this case-control study were taken from the hemodialysis population at Fresenius Medical Care, North America. 924 in-center cardiopulmonary events (cases and 75,538 controls were identified. Cases and controls were 1 : 5 matched on age, sex, race, and diabetes. Predictors of cardiopulmonary arrest were considered for logistic model inclusion. Missed treatments due to hospitalization, lower body mass, coronary artery disease, heart failure, lower albumin and hemoglobin, lower dialysate potassium, higher serum calcium, greater erythropoietin stimulating agent dose, and normalized protein catabolic rate (J-shaped were associated with peridialytic cardiopulmonary arrest. Of these, lower albumin, hemoglobin, and body mass index; higher erythropoietin stimulating agent dose; and greater missed sessions had the strongest associations with outcome. Patient health markers and procedural factors are associated with peridialytic cardiopulmonary arrest. In addition to optimizing nutritional status, it may be prudent to limit exposure to low dialysate potassium (<2 K bath and to use the lowest effective erythropoietin stimulating agent dose.

  7. Machine Learning

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Machine learning, which builds on ideas in computer science, statistics, and optimization, focuses on developing algorithms to identify patterns and regularities in data, and using these learned patterns to make predictions on new observations. Boosted by its industrial and commercial applications, the field of machine learning is quickly evolving and expanding. Recent advances have seen great success in the realms of computer vision, natural language processing, and broadly in data science. Many of these techniques have already been applied in particle physics, for instance for particle identification, detector monitoring, and the optimization of computer resources. Modern machine learning approaches, such as deep learning, are only just beginning to be applied to the analysis of High Energy Physics data to approach more and more complex problems. These classes will review the framework behind machine learning and discuss recent developments in the field.

  8. A marked increase in gastric fluid volume during cardiopulmonary bypass

    Science.gov (United States)

    Hirota, Kazuyoshi; Kudo, Mihoko; Hashimoto, Hiroshi; Kushikata, Tetsuya

    2011-01-01

    Major physiological stress occurs during cardiac surgery with cardiopulmonary bypass. This is related to hypothermia and artificial organ perfusion. Thus, serious gastrointestinal complications, particularly upper gastrointestinal bleeding, sometimes follow cardiac surgery. We have compared the antisecretory effects of a preanesthetic H2 antagonist (roxatidine, cardiopulmonary bypass-H2 group, n = 15) and a proton pump inhibitor (rabeprazole, cardiopulmonary bypass-PPI group, n = 15) in patients undergoing cardiac surgery with cardiopulmonary bypass, and also compared in patients undergoing a off-pump coronary artery bypass graft surgery (off-pump cardiopulmonary bypass-H2 group, n = 15). Gastric pH (5.14 ± 0.61) and gastric fluid volume (13.2 ± 2.4 mL) at the end of surgery in off-pump cardiopulmonary bypass-H2 groups was significantly lower and higher than those in both cardiopulmonary bypass-H2 (6.25 ± 0.54, 51.3 ± 8.0 mL) and cardiopulmonary bypass-PPI (7.29 ± 0.13, 63.5 ± 14.8 mL) groups, respectively although those variables did not differ between groups after the induction of anesthesia. Plasma gastrin (142 ± 7 pg/mL) at the end of surgery and maximal blood lactate levels (1.50 ± 0.61 mM) in off-pump cardiopulmonary bypass-H2 group were also significantly lower than those in both cardiopulmonary bypass-H2 (455 ± 96 pg/mL, 3.97 ± 0.80 mM) and cardiopulmonary bypass-PPI (525 ± 27 pg/mL, 3.15 ± 0.44 mM) groups, respectively. In addition, there was a significant correlation between gastric fluid volume and maximal blood lactate (r = 0.596). In conclusion, cardiopulmonary bypass may cause an increase in gastric fluid volume which neither H2 antagonist nor PPI suppresses. A significant correlation between gastric fluid volume and maximal blood lactate suggests that gastric fluid volume may predict degree of gastrointestinal tract hypoperfusion. PMID:21765601

  9. Strategies for cardiopulmonary exercise testing of pectus excavatum patients

    Directory of Open Access Journals (Sweden)

    Moh H. Malek

    2008-01-01

    Full Text Available The purpose of this paper is to provide strategies for cardiopulmonary exercise testing of pectus excavatum patients. Currently, there are no standardized methods for assessing cardiovascular and pulmonary responses in this population; therefore, making comparisons across studies is difficult if not impossible. These strategies are intended for physicians, pulmonary technicians, exercise physiologists, and other healthcare professionals who conduct cardiopulmonary exercise testing on pectus excavatum patients. By using the strategies outlined in this report, comparisons across studies can be made, and the effects of pectus excavatum on cardiopulmonary function can be assessed with greater detail.

  10. Some Medicolegal Aspects of the Russian Cardiopulmonary Resuscitation Protocol

    Directory of Open Access Journals (Sweden)

    V. A. Kuksinsky

    2006-01-01

    Full Text Available The purpose of the study was to analyze the Russian legislation to identify the medicolegal aspects of cardiopulmonary resuscitation, which are most significant for an intensive care anesthesiologist. Statutory acts concerning human health care, including those pertinent to cardiopulmonary resuscitation and those providing for the responsibility of medical workers in some cases were analyzed. A number of discrepancies in various legal acts concerning human death verification and resuscitative measures were identified. The analysis has revealed the aspects of cardiopulmonary resuscitation, which are, from the point of view of legislation, most important for the physician.

  11. Transient Diabetes Insipidus Following Cardiopulmonary Bypass.

    Science.gov (United States)

    Ekim, Meral; Ekim, Hasan; Yilmaz, Yunus Keser; Bolat, Ali

    2015-04-01

    Diabetes insipidus (DI) results from inadequate output of Antidiuretic Hormone (ADH) from the pituitary gland (central DI) or the inability of the kidney tubules to respond to ADH (nephrogenic DI). ADH is an octapeptide produced in the supraoptic and paraventricular nuclei of the hypothalamus and stored in the posterior lobe of the pituitary gland. Cardiopulmonary Bypass (CPB) has been shown to cause a six-fold increased circulating ADH levels 12 hours after surgery. However, in some cases, ADH release may be transiently suppressed due to cardioplegia (cardiac standstill) or CPB leading to DI. We present the postoperative course of a 60-year-old man who developed transient DI after CPB. He was successfully treated by applying nasal desmopressin therapy. Relevant biochemical parameters should be monitored closely in patients who produce excessive urine after open heart surgery.

  12. Secondary pseudohypoaldosteronism causing cardiopulmonary arrest and cholelithiasis.

    Science.gov (United States)

    Kibe, Tetsuya; Sobajima, Takehiro; Yoshimura, Ayumi; Uno, Yuichi; Wada, Naohiro; Ueta, Ikuya

    2014-04-01

    A 4-month-old boy presented with cardiopulmonary arrest on arrival after a brief period of lethargy. Laboratory examination indicated severe hyperkalemia, hyponatremia, metabolic acidosis, and slightly elevated C-reactive protein. Whole body computed tomography identified left-dominant hydronephrosis, hydroureter and cholelithiasis. Despite cardiac arrest >30 min, he was successfully resuscitated and treated with therapeutic hypothermia. Escherichia coli was detected on urine culture. Renal ultrasound showed bilateral hydronephrosis, grade II in the right and grade IV in the left. Retrospective analysis of the blood sample at admission indicated a high level of aldosterone. The patient recovered almost fully with no electrolyte imbalance and normal plasma renin and aldosterone, leading to the diagnosis of secondary pseudohypoaldosteronism associated with bilateral infected hydronephrosis. In this case, cholelithiasis, which may account for chronic dehydration, was a diagnostic clue in the absence of information of pre-existing situations. © 2014 The Authors. Pediatrics International © 2014 Japan Pediatric Society.

  13. Cardiopulmonary resuscitation: a review for clinicians.

    Science.gov (United States)

    Varon, J; Marik, P E; Fromm, R E

    1998-02-01

    Attempts at cardiopulmonary resuscitation (CPR) date from antiquity, but it is only in the last 50 years that a scientifically-based methodology has been developed. External chest compressions is the standard method for managing circulatory arrest, however, numerous alterations of this technique have been proposed in attempts to improve outcome from CPR. Defibrillation is the single most important therapy for the management of ventricular fibrillation or pulseless ventricular tachycardia. Adrenergic agents used to improve myocardial and cerebral perfusion are also the subject of considerable investigation with new agents entering clinical study. This paper reviews the history, current techniques and pharmacotherapy as well as controversial issues in the management of patients with cardiac arrest.

  14. Automated cardiopulmonary resuscitation: a case study.

    Science.gov (United States)

    Spiro, Jon; Theodosiou, Maria; Doshi, Sagar

    2014-02-01

    Rates of survival after cardiac arrest are low and correlate with the quality of cardiopulmonary resuscitation (CPR). Devices that deliver automated CPR (A-CPR) can provide sustained and effective chest compressions, which are especially useful during patient transfer and while simultaneous invasive procedures are being performed. The use of such devices can also release members of resuscitation teams for other work. This article presents a case study involving a man with acute myocardial infarction complicated by cardiogenic shock and pulmonary oedema. It describes how ED nursing and medical teams worked together to deliver A-CPR, discusses the use of A-CPR devices in a tertiary cardiac centre, and highlights the advantages of using such devices.

  15. Man - Machine Communication

    CERN Document Server

    Petersen, Peter; Nielsen, Henning

    1984-01-01

    This report describes a Man-to-Machine Communication module which together with a STAC can take care of all operator inputs from the touch-screen, tracker balls and mechanical buttons. The MMC module can also contain a G64 card which could be a GPIB driver but many other G64 cards could be used. The soft-ware services the input devices and makes the results accessible from the CAMAC bus. NODAL functions for the Man Machine Communication is implemented in the STAC and in the ICC.

  16. Evaluation of coma patients after cardiopulmonary resuscitation

    Institute of Scientific and Technical Information of China (English)

    SU Ying-ying; YANG Qing-lin; PANG Ying; LV Xiang-ping

    2005-01-01

    Background Coma after cardiopulmonary resuscitation (CPR) is commonly seen in daily clinical practice. How to objectively evaluate brain function after CPR is essential to the following treatment. Coma patients after CPR had been studied prospectively at the Neuro-Intensive Care Unit of Xuanwu Hospital since 2002. In this study, we focused on the topic of how to evaluate the severity of coma after CPR .Methods From April 2002 to November 2004, patients in coma 24 hours after CPR were monitored, the evaluation methods included Glasgow coma score (GCS),brain stem reflection, and spinal reflection. Laboratory evaluation included electroencephalography (EEG),brainstem auditory evoked potential (BAEP), short latency somatosensory evoked potential (SLSEP), and transcranial Doppler (TCD) .Results Twenty-four of 35 patients(68.57%)were in deep coma. The GCS was 3 except for 2 patients;EEG was evaluated not less than grade Ⅳ except for 4 patients, BAEP was evaluated as grade Ⅲ except for 3 patients, and SLSEP was evaluated as grade Ⅲ except for 1 patient.Twenty-four patients died within 1 month and 11 of them(45.83%)were determined as brain death. Glasgow outcome score (GOS) was evaluated as grade Ⅰ. Eleven of the 35 patients survived and their consciousness changed from deep coma to coma vigil. EEG was evaluated as gradeⅠin 5 patients, BAEP and SLSEP were evaluated as grade Ⅰ in 3 patients, and GOS was all evaluated as grade Ⅱ among the 11 patients.Two patients(18.18%)regained consciousness in 35 and 90 days after cardiopulmonary resuscitation and GOS was evaluated as grade Ⅳ and Ⅲ, respectively.Conclusion Combined or continuous evaluation of clinical examinations and laboratory tests can accurately and objectively determine brain function after CPR.

  17. Spatial variation in nitrogen dioxide concentrations and cardiopulmonary hospital admissions

    NARCIS (Netherlands)

    Dijkema, Marieke B A; van Strien, Robert T; van der Zee, Saskia C; Mallant, Sanne F; Fischer, Paul; Hoek, Gerard; Brunekreef, Bert; Gehring, Ulrike

    2016-01-01

    BACKGROUND: Air pollution episodes are associated with increased cardiopulmonary hospital admissions. Cohort studies showed associations of spatial variation in traffic-related air pollution with respiratory and cardiovascular mortality. Much less is known in particular about associations with cardi

  18. Rodent models of cardiopulmonary bypass: utility in improving perioperative outcomes

    NARCIS (Netherlands)

    de Lange, F.

    2008-01-01

    Despite advances in surgical and anesthesia techniques, subtle neurologic injury still remains an important complication after cardiac surgery. Because the causes are multifactorial and complex, research in an appropriate small animal model for cardiopulmonary bypass (CPB) is warranted. This thesis

  19. Family presence during cardiopulmonary resuscitation and invasive procedures in children

    National Research Council Canada - National Science Library

    Ferreira, Cristiana Araújo G; Balbino, Flávia Simphronio; Balieiro, Maria Magda F. G; Mandetta, Myriam Aparecida

    2014-01-01

    Objective: To identify literature evidences related to actions to promote family's presence during cardiopulmonary resuscitation and invasive procedures in children hospitalized in pediatric and neonatal critical care units.Data sources...

  20. Predicting the need for blood during cardiopulmonary bypass

    African Journals Online (AJOL)

    Adele

    from the depot. Supply logistics of banked blood may be problematic during car- ... delivery that occurs on initiation of cardiopulmonary bypass (CPB). In spite of patient ... whole body oxygen consumption, there is a time lapse before stable.

  1. Induction and detection of disturbed homeostasis in cardiopulmonary bypass

    NARCIS (Netherlands)

    de Vroege, R; Meerman, FT; Eijsman, L; Wildevuur, WR; Wildevuur, CRH; van Oeveren, W

    2004-01-01

    During cardiopulmonary bypass (CPB) haemodynamic alterations, haemostasis and the inflammatory response are the main causes of homeostatic disruption. Even with CPB procedures of short duration, the homeostasis of a patient is disrupted and, in many cases, requires intensive postoperative treatment

  2. Experience on maintenance for Sea Sky scanner in paper machine operation%纸机内扫描架的维护经验

    Institute of Scientific and Technical Information of China (English)

    史延鹏

    2015-01-01

    扫描架作为一种测量纸张定量、水分的测试仪器,在纸机上普遍应用。本文介绍了四川绵阳海天生产的扫描架(QCS)在纸机上的应用与平时的维护方法。%Sea Sky scanner is an equipment of measuring paper’s weight and moisture, generally using in various paper’s machine, this text introduce the scanner using of paper’s machine and maintaining in daily.

  3. Pediatric Cardiopulmonary Resuscitation: Advances in Science, Techniques, and Outcomes

    OpenAIRE

    Topjian, Alexis A.; Berg, Robert A; Nadkarni, Vinay M.

    2008-01-01

    More than 25% of children survive to hospital discharge after in-hospital cardiac arrests, and 5% to 10% survive after out-of-hospital cardiac arrests. This review of pediatric cardiopulmonary resuscitation addresses the epidemiology of pediatric cardiac arrests, mechanisms of coronary blood flow during cardiopulmonary resuscitation, the 4 phases of cardiac arrest resuscitation, appropriate interventions during each phase, special resuscitation circumstances, extracorporeal membrane oxygenati...

  4. Mechanism Research of Pre-B-Cell Colony Enhancing Factor on Increasing of Pulmonary Vascular Endothelial Permeabil-ity After Cardiopulmonary Bypass Operation%前B细胞克隆增强因子在体外循环术后肺血管内皮通透性增加中的机制研究

    Institute of Scientific and Technical Information of China (English)

    杨威; 董啸

    2016-01-01

    Objective To study the mechanism of pre-B-cell colony enhancing factor (PBEF) on increasing of pulmonary vascular endothelial permeability after cardiopulmonary bypass (CPB) operation and to provide theoretical basis for protection of lung injury during CPB. Methods Conventional animal models were established and grouped. The control group animals were established CPB after anesthesia without CPB transfer. Group A was transfected by lentivirus AD-PBEFshRNA and established CPB after anesthesia without CPB transfer. Group B was for 30-minute deep low temperature cycle after CPB. Group C was transfected by lentivirus AD-PBEFshRNA and then for 30-minute deep low temperature cycle. Every group above was 10 animals. Phosphorylated P38MAPK, ERK, MLC, VE-cadherin and FAK in each group was detected by Western blotting. Serum levels of TNF-αand IL-6 for two groups were detected by ELISA method. Results Expressions of mRNA in PBEF, P38MAPK, ERK, MLC, VE-cadherin and FAK in group C were evidently higher than those in group A and B (P<0.01). Serum levels of TNF-αand IL-6 in group C were obviously higher than those in group A and B, with statistical differences (P<0.01). Conclusions PBEF can increase pulmonary vascular endothelial permeability after CPB operation by pathways of P38MAPK and ERK. And TNF-αand IL-6 may involve in this process.%目的 研究体外循环 (CPB) 术后前B细胞克隆增强因子 (PBEF) 在肺血管内皮通透性增加中的机制, 为CPB期间肺损伤保护提供理论依据. 方法 常规动物模型建立并进行分组, 对照组动物麻醉后建立CPB, 不行CPB转流; A组动物进行慢病毒AD-PBEFshRNA转染, 麻醉后建立CPB, 不行CPB转流; B组动物建立CPB后进行30 min深低温停循环; C组动物慢病毒AD-PBEFshRNA转染后, 再进行30 min深低温停循环; 以上每组10只动物. RT-PCR法检测各组PBEF mRNA; West-ern blotting检测各组磷酸化P38MAPK、 磷酸化ERK、 磷酸化MLC、 磷

  5. Cutting tool materials for high speed machining

    Institute of Scientific and Technical Information of China (English)

    LIU Zhanqiang; AI Xing

    2005-01-01

    High speed machining (HSM) is one of the emerging cutting processes, which is machining at a speed significantlyhigher than the speed commonly in use on the shop floor. In the last twenty years, high speed machining has received great attentions as a technological solution for high productivity in manufacturing. This article reviews the developments of tool materials in high speed machining operations, and the properties, applications and prospective developments of tool materials in HSM are also presented.

  6. Activation of NTS A(1) adenosine receptors inhibits regional sympathetic responses evoked by activation of cardiopulmonary chemoreflex.

    Science.gov (United States)

    Ichinose, Tomoko K; Minic, Zeljka; Li, Cailian; O'Leary, Donal S; Scislo, Tadeusz J

    2012-09-01

    Previously we have shown that adenosine operating via the A(1) receptor subtype may inhibit glutamatergic transmission in the baroreflex arc within the nucleus of the solitary tract (NTS) and differentially increase renal (RSNA), preganglionic adrenal (pre-ASNA), and lumbar (LSNA) sympathetic nerve activity (ASNA>RSNA≥LSNA). Since the cardiopulmonary chemoreflex and the arterial baroreflex are mediated via similar medullary pathways, and glutamate is a primary transmitter in both pathways, it is likely that adenosine operating via A(1) receptors in the NTS may differentially inhibit regional sympathetic responses evoked by activation of cardiopulmonary chemoreceptors. Therefore, in urethane-chloralose-anesthetized rats (n = 37) we compared regional sympathoinhibition evoked by the cardiopulmonary chemoreflex (activated with right atrial injections of serotonin 5HT(3) receptor agonist phenylbiguanide, PBG, 1-8 μg/kg) before and after selective stimulation of NTS A(1) adenosine receptors [microinjections of N(6)-cyclopentyl adenosine (CPA), 0.033-330 pmol/50 nl]. Activation of cardiopulmonary chemoreceptors evoked differential, dose-dependent sympathoinhibition (RSNA>ASNA>LSNA), and decreases in arterial pressure and heart rate. These differential sympathetic responses were uniformly attenuated in dose-dependent manner by microinjections of CPA into the NTS. Volume control (n = 11) and blockade of adenosine receptor subtypes in the NTS via 8-(p-sulfophenyl)theophylline (8-SPT, 1 nmol in 100 nl) (n = 9) did not affect the reflex responses. We conclude that activation of NTS A(1) adenosine receptors uniformly inhibits neural and cardiovascular cardiopulmonary chemoreflex responses. A(1) adenosine receptors have no tonic modulatory effect on this reflex under normal conditions. However, when adenosine is released into the NTS (i.e., during stress or severe hypotension/ischemia), it may serve as negative feedback regulator for depressor and sympathoinhibitory reflexes

  7. Cardiopulmonary risk index does not predict complications after thoracic surgery.

    Science.gov (United States)

    Melendez, J A; Carlon, V A

    1998-07-01

    The preoperative cardiopulmonary risk index (CPRI) is a multifactorial index intended to predict postoperative outcome after thoracic surgery. It combines cardiac and pulmonary information into one parameter that ranges from 1 to 10, with 10 being the worst. A CPRI > or = 4 has been advocated as an effective predictor of postoperative pulmonary and cardiac complications. This study prospectively evaluates the predictive value of CPRI in a large population of patients undergoing thoracic surgery. We performed prospective calculation of CPRI in patients about to undergo thoracic surgery. Postthoracic surgery occurrence of pneumonia, atelectasis, arrhythmias, congestive heart failure, respiratory failure requiring therapy, or death occurring within 30 days of surgery was compared with preoperative CPRI and its components. One hundred eighty consecutive patients, aged 15 to 87 years, were studied. Operations performed included 114 lobectomies, 35 wedge resections, 19 pneumonectomies, 5 pleurectomies, 5 lymph node dissections, 1 thoracic wall resection, and 1 paravertebral tumor resection. Twenty-seven percent of patients experienced complications. CPRI and its components did not predict complications, deaths, or the number of in-hospital days. We found a CPRI > or = 4 to be a moderate predictor of outcome for patients undergoing pneumonectomy (n = 19). It correctly identified four of nine postpneumonectomy complications. The preoperative CPRI and its components are inadequate predictors of medical complications after thoracic surgery in a general population. In the subgroup of patients undergoing pneumonectomy, the index may be of some value in forecasting outcome.

  8. Acute mesenteric ischemia after cardio-pulmonary bypass surgery

    Institute of Scientific and Technical Information of China (English)

    Bassam Abboud; Ronald Daher; Joe Boujaoude

    2008-01-01

    Acute mesenteric ischemia (AMI) is a highly-lethal surgical emergency.Several pathophysiologic events (arterial obstruction,venous thrombosis and diffuse vasospasm) lead to a sudden decrease in mesenteric blood flow.Ischemia/reperfusion syndrome of the intestine is responsible for systemic abnormalities,leading to multi-organ failure and death.Early diagnosis is difficult because the clinical presentation is subtle,and the biological and radiological diagnostic tools lack sensitivity and specificity.Therapeutic options vary from conservative resuscitation,medical treatment,endovascular techniques and surgical resection and revascularization.A high index of suspicion is required for diagnosis,and prompt treatment is the only hope of reducing the mortality rate.Studies are in progress to provide more accurate diagnostic tools for early diagnosis.AMI can complicate the post-operative course of patients following cardio-pulmonary bypass (CPB).Several factors contribute to the systemic hypo-perfusion state,which is the most frequent pathophysiologic event.In this particular setting,the clinical presentation of AMI can be misleading,while the laboratory and radiological diagnostic tests often produce inconclusive results.The management strategies are controversial,but early treatment is critical for saving lives.Based on the experience of our team,we consider prompt exploratory laparotomy,irrespective of the results of the diagnostic tests,is the only way to provide objective assessment and adequate treatment,leading to dramatic reduction in the mortality rate.

  9. Cardiopulmonary bypass considerations for pediatric patients on the ketogenic diet.

    Science.gov (United States)

    Melchior, R W; Dreher, M; Ramsey, E; Savoca, M; Rosenthal, T

    2015-07-01

    There is a population of children with epilepsy that is refractory to anti-epileptic drugs. The ketogenic diet, a high-fat, low-carbohydrate regimen, is one alternative treatment to decrease seizure activity. Special considerations are required for patients on the ketogenic diet undergoing cardiopulmonary bypass (CPB) to prevent exposure to glucose substrates that could alter ketosis, increasing the risk of recurrent seizures. A 2-year-old, 9 kilogram male with a history of infantile spasms with intractable epilepsy, trisomy 21 status post tetralogy of Fallot repair, presented to the cardiac operating room for closure of a residual atrial septal defect. All disciplines of the surgical case minimized the use of carbohydrate-containing and contraindicated medications. Changes to the standard protocol and metabolic monitoring ensured the patient maintained ketosis. All disciplines within cardiac surgery need to be cognizant of patients on the ketogenic diet and prepare a modified protocol. Future monitoring considerations include thromboelastography, electroencephalography and continuous glucose measurement. Key areas of focus with this patient population in the cardiac surgical theater are to maintain a multidisciplinary approach, alter the required CPB prime components, address cardiac pharmacological concerns and limit any abnormal hematological occurrences. © The Author(s) 2014.

  10. Machine testning

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with a laboratory exercise of 3 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercise includes a series of tests carried out by the student on a conventional and a numerically controled lathe, respectively. This document...

  11. Representational Machines

    DEFF Research Database (Denmark)

    Petersson, Dag; Dahlgren, Anna; Vestberg, Nina Lager

    to the enterprises of the medium. This is the subject of Representational Machines: How photography enlists the workings of institutional technologies in search of establishing new iconic and social spaces. Together, the contributions to this edited volume span historical epochs, social environments, technological...

  12. Technical aspects of anesthesia and cardiopulmonary bypass in patients undergoing totally thoracoscopic cardiac surgery.

    Science.gov (United States)

    Zhang, Zong-Wang; Zhang, Xue-Jun; Li, Chang-Ying; Ma, Long-Le; Wang, Le-Xin

    2012-04-01

    The use of fast-track general anesthesia in patients undergoing nonrobotically assisted and totally thoracoscopic cardiac surgeries has not been previously reported previously. A prospective clinical study. A university hospital. Ninety-six patients (41 males; mean age, 13.2 ± 6.2 years; range, 5-47 years). Nonrobotically assisted totally thoracoscopic surgeries were performed for atrial (n = 58) or ventricular septal defect (n = 32), tetralogy of Fallot (n = 2), left atrial myxoma (n = 3), and pulmonary valve stenosis (n = 1). Fast-track general anesthesia was induced with midazolam, propofol, fentanyl, and vecuronium and was maintained with remifentanil and sevoflurane. Cardiopulmonary bypass was established peripherally through the femoral vein and artery. All surgeries were successful. There were no perioperative mortality or major complications. The mean cardiopulmonary bypass and aortic cross-clamp times were 42 ± 21 minutes and 33 ± 8 minutes, respectively. In 82 cases, the heart regained beats automatically after the release of the aortic cross-clamp, whereas in 14 patients external defibrillation was required. Extubation was conducted in 32 patients (33.3%) in the operating room 15 minutes after the operation. The mean times of mechanical ventilation and stay in the intensive care unit were 1.5 ± 0.2 hours and 20.1 ±1.2 hours, respectively. Cardiopulmonary bypass for totally thoracoscopic cardiac surgery can be established through the femoral artery and femoral vein. With fast-track anesthesia, early extubation in the operating room can be achieved in more than one third of patients. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

  13. Introduction to Machine Protection

    CERN Document Server

    Schmidt, R

    2016-01-01

    Protection of accelerator equipment is as old as accelerator technology and was for many years related to high-power equipment. Examples are the protection of powering equipment from overheating (magnets, power converters, high-current cables), of superconducting magnets from damage after a quench and of klystrons. The protection of equipment from beam accidents is more recent, although there was one paper that discussed beam-induced damage for the SLAC linac (Stanford Linear Accelerator Center) as early as in 1967. It is related to the increasing beam power of high-power proton accelerators, to the emission of synchrotron light by electron-positron accelerators and to the increase of energy stored in the beam. Designing a machine protection system requires an excellent understanding of accelerator physics and operation to anticipate possible failures that could lead to damage. Machine protection includes beam and equipment monitoring, a system to safely stop beam operation (e.g. dumping the beam or stopping ...

  14. Operation Range of Brushless Doubly-fed Machine Based on Slot-harmonics%齿谐波法设计的无刷双馈发电机运行范围

    Institute of Scientific and Technical Information of China (English)

    阚超豪; 王雪帆

    2011-01-01

    Wound rotor brushless doubly-fed machine (WRBDFM) based on slot-harmonics have wide application in variable speed constant frequency power generation, and the reliability of the machine is the key factor for the applications of WRBDFM. In order to achieve safely operate for the machine, the working area was defined as the zone in which brushless doubly-fest machine could safely be operated without exceeding its material and stability limits. It meant that there were some restrictions needed, such as electric loadings, magnetic loadings and capacity of converter. Based on the field of marine shaft actual working conditions and the full circuit model of slot-harmonics WRBDFM, It had been analyzed that the electric loadings composition and temperature rising of the machine, the select of magnetic loadings and the selection of converter-inverter capacity. The stability operation range was obtained. Finally, the correctness of results and theoretical analysis gained from researching was verified through the experiment of laboratory WRBDFM.%转子绕组采用齿谐波法设计的无刷双馈电机在变速恒频发电领域有着广泛的应用前景,而影响其应用的关键在于电机运行的可靠性。要实现电机可靠运行,则必须考虑电机能可靠运行的约束条件。约束条件主要包含运行时电机的电负荷、磁负荷和变频器容量等。根据齿谐波法绕线转子无刷双馈发电机在船用轴带领域的实际工况,依据绕线转子无刷双馈电机全电路模型,对轴带发电机电负荷的组成及其对电机温升的影响、磁负荷选择的依据和变频器容量的选择等进行了分析,推导了绕线转子无刷双馈发电机可靠运行的范围。计算和样机实验对比验证了结论的正确性。

  15. Possible SARS coronavirus transmission during cardiopulmonary resuscitation.

    Science.gov (United States)

    Christian, Michael D; Loutfy, Mona; McDonald, L Clifford; Martinez, Kennth F; Ofner, Mariana; Wong, Tom; Wallington, Tamara; Gold, Wayne L; Mederski, Barbara; Green, Karen; Low, Donald E

    2004-02-01

    Infection of healthcare workers with the severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is thought to occur primarily by either contact or large respiratory droplet transmission. However, infrequent healthcare worker infections occurred despite the use of contact and droplet precautions, particularly during certain aerosol-generating medical procedures. We investigated a possible cluster of SARS-CoV infections in healthcare workers who used contact and droplet precautions during attempted cardiopulmonary resuscitation of a SARS patient. Unlike previously reported instances of transmission during aerosol-generating procedures, the index case-patient was unresponsive, and the intubation procedure was performed quickly and without difficulty. However, before intubation, the patient was ventilated with a bag-valve-mask that may have contributed to aerosolization of SARS-CoV. On the basis of the results of this investigation and previous reports of SARS transmission during aerosol-generating procedures, a systematic approach to the problem is outlined, including the use of the following: 1) administrative controls, 2) environmental engineering controls, 3) personal protective equipment, and 4) quality control.

  16. Conflicting perspectives compromising discussions on cardiopulmonary resuscitation.

    LENUS (Irish Health Repository)

    Groarke, J

    2010-09-01

    Healthcare professionals, patients and their relatives are expected to discuss resuscitation together. This study aims to identify the differences in the knowledge base and understanding of these parties. Questionnaires examining knowledge and opinion on resuscitation matters were completed during interviews of randomly selected doctors, nurses and the general public. 70% doctors, 24% nurses and 0% of a public group correctly estimated survival to discharge following in-hospital resuscitation attempts. Deficiencies were identified in doctor and nurse knowledge of ethics governing resuscitation decisions. Public opinion often conflicts with ethical guidelines. Public understanding of the nature of cardiopulmonary arrests and resuscitation attempts; and of the implications of a \\'Do Not Attempt Resuscitation (DNAR)\\' order is poor. Television medical dramas are the primary source of resuscitation knowledge. Deficiencies in healthcare professionals\\' knowledge of resuscitation ethics and outcomes may compromise resuscitation decisions. Educational initiatives to address deficiencies are necessary. Parties involved in discussion on resuscitation do not share the same knowledge base reducing the likelihood of meaningful discussion. Public misapprehensions surrounding resuscitation must be identified and corrected during discussion.

  17. The Cardiopulmonary effect of passive movement

    Directory of Open Access Journals (Sweden)

    L. Loram

    2002-02-01

    Full Text Available Eleven articles were reviewed on the cardiopulmonary effects of passive movements. These included two articles on theneurological effects of passive movements. Of the eleven articles, four were considered to have level II evidence in accordance with Sackett’s rules of evidence. There was little consensus regarding the rate or duration of passive movements. There were some suggestions that upper limb movement produces a greater ventilatory response than lower limb movement. There was a statistically significant increase (p< 0.05 in minute ventilation when the movement was done at a rate of 40 repetitions per minute or more, but this change may not be clinically significant. Passive movements were not detrimental to neurosurgical patients with a normal or slightly elevated intracranial pressure, although the values of the intracranial pressure were not stated.  The studies were limited in that eight of the eleven had small sample sizes and most studies were conducted using normal subjects. Further studies with higher levels of evidence need to be  conducted to verify any results reported to date in the literature. Studies that are relevant to clinical practice also need to be conducted in populations such as sedated intensive care patients.

  18. Cardiopulmonary Exercise Test: Background, Applicability and Interpretation

    Science.gov (United States)

    Herdy, Artur Haddad; Ritt, Luiz Eduardo Fonteles; Stein, Ricardo; de Araújo, Claudio Gil Soares; Milani, Mauricio; Meneghelo, Romeu Sérgio; Ferraz, Almir Sérgio; Hossri, Carlos; de Almeida, Antonio Eduardo Monteiro; Fernandes-Silva, Miguel Morita; Serra, Salvador Manoel

    2016-01-01

    Cardiopulmonary exercise test (CPET) has been gaining importance as a method of functional assessment in Brazil and worldwide. In its most frequent applications, CPET consists in applying a gradually increasing intensity exercise until exhaustion or until the appearance of limiting symptoms and/or signs. The following parameters are measured: ventilation; oxygen consumption (VO2); carbon dioxide production (VCO2); and the other variables of conventional exercise testing. In addition, in specific situations, pulse oximetry and flow-volume loops during and after exertion are measured. The CPET provides joint data analysis that allows complete assessment of the cardiovascular, respiratory, muscular and metabolic systems during exertion, being considered gold standard for cardiorespiratory functional assessment.1-6 The CPET allows defining mechanisms related to low functional capacity that can cause symptoms, such as dyspnea, and correlate them with changes in the cardiovascular, pulmonary and skeletal muscle systems. Furthermore, it can be used to provide the prognostic assessment of patients with heart or lung diseases, and in the preoperative period, in addition to aiding in a more careful exercise prescription to healthy subjects, athletes and patients with heart or lung diseases. Similarly to CPET clinical use, its research also increases, with the publication of several scientific contributions from Brazilian researchers in high-impact journals. Therefore, this study aimed at providing a comprehensive review on the applicability of CPET to different clinical situations, in addition to serving as a practical guide for the interpretation of that test. PMID:27982272

  19. Postoperative abdominal complications after cardiopulmonary bypass

    Directory of Open Access Journals (Sweden)

    Dong Guohua

    2012-10-01

    Full Text Available Abstract Background To summarize the diagnostic and therapeutic experiences on the patients who suffered abdominal complications after cardiovascular surgery with cardiopulmonary bypass(CPB. Methods A total of 2349 consecutive patients submitted to cardiovascular surgery with CPB in our hospital from Jan 2004 to Dec 2010 were involved. The clinical data of any abdominal complication, including its incidence, characters, relative risks, diagnostic measures, medical or surgical management and mortality, was retrospectively analyzed. Results Of all the patients, 33(1.4% developed abdominal complications postoperatively, including 11(33.3% cases of paralytic ileus, 9(27.3% of gastrointestinal haemorrhage, 2(6.1% of gastroduodenal ulcer perforation, 2(6.1% of acute calculus cholecystitis, 3(9.1% of acute acalculus cholecystitis, 4(12.1% of hepatic dysfunction and 2(6.1% of ischemia bowel diseases. Of the 33 patients, 26 (78.8% accepted medical treatment and 7 (21.2% underwent subsequent surgical intervention. There were 5(15.2% deaths in this series, which was significantly higher than the overall mortality (2.7%. Positive history of peptic ulcer, advanced ages, bad heart function, preoperative IABP support, prolonged CPB time, low cardiac output and prolonged mechanical ventilation are the risk factors of abdominal complications. Conclusions Abdominal complications after cardiovascular surgery with CPB have a low incidence but a higher mortality. Early detection and prompt appropriate intervention are essential for the outcome of the patients.

  20. Cardiopulmonary exercise testing (CPET) in pulmonary emphysema.

    Science.gov (United States)

    Paoletti, Patrizia; De Filippis, Francesca; Fraioli, Francesco; Cinquanta, Alessandra; Valli, Gabriele; Laveneziana, Pierantonio; Vaccaro, Francesco; Martolini, Dario; Palange, Paolo

    2011-12-15

    In patients affected by chronic obstructive pulmonary disease (COPD), cardiopulmonary response to exercise was never related to the severity of emphysema (E) measured by high resolution computed tomography (HRCT). Sixteen patients (age=65±8 yrs; FEV(1)=54±18%pred; RV=160±28%pred) with moderate to severe E (quantified by lung HRCT as % voxels cycle-ergometer to exhaustion. Oxygen uptake (V˙(O2)), carbon dioxide output (V˙(CO2)), ventilation (V˙(E)), tidal volume (V(T)), and end-tidal P(CO2) (PET(CO2)) derived variables were measured breath-by-breath. The % of E correlated with: (1) the ratio V(Tpeak) (r=0.74; p=0.001); (2) the V˙(E)/V˙(CO2) slope (r=-0.77; p=0.0004); (3) PET(CO2) values at peak exercise (r=0.80; p=0.0001). Also, the %E was strongly predicted by the following exercise equation: %E(EST) = 58.1 + 11.9 × ΔV˙(E)/V˙(CO2) (r=0.94; p1 is typically observed in severe E patients; furthermore, the V˙(E)/V˙(CO2) slope and the PET(CO2peak) values decrease and increase respectively as more as the emphysema is severe.

  1. Neonatal repair of left atrial diverticulum with gigantic thrombus without cardiopulmonary bypass.

    Science.gov (United States)

    Higashida, Akihiko; Hoashi, Takaya; Sakaguchi, Heima; Ichikawa, Hajime

    2017-04-08

    A 5-day-old neonate with coarctation of the aorta, hypoplastic aortic arch, large apical muscular ventricular septal defect, and patent ductus arteriosus developed pulmonary over-circulation and systemic hypoperfusion underwent bilateral pulmonary artery banding through median sternotomy as a part of hybrid stage I palliation. At operation, left atrial diverticulum with gigantic thrombus formation at the base of the left atrial appendage was incidentally detected by intraoperative direct echocardiography, and therefore, was successfully resected with the whole thrombus inside it without use of cardiopulmonary bypass. Histopathological finding was compatible with diverticulum. The patient was free from atrial arrhythmia and recurrent thrombus formation.

  2. A operação de Glenn bidirecional deve ser realizada com ou sem o auxílio de circulação extracorpórea? Should the Bidirectional Glenn Operation be performed with or without cardiopulmonary bypass?

    Directory of Open Access Journals (Sweden)

    Ulisses Alexandre Crotti

    2004-09-01

    e mortalidade. Assim sendo, a operação sem CEC pode ser empregada com segurança quando os achados anatômicos forem apropriados e não houver hipóxia grave.OBJECTIVE: To compare patients who underwent the Bidirectional Glenn Operation with and without cardiopulmonary bypass (CPB, analyzing the characteristics and confirming if there is superiority of either of the employed techniques. METHOD: Between January 2002 and January 2004, 16 patients with complex heart defects were submitted to this operative technique. The mean age of the patients was 19 months and 14 were female. The patients were divided into two groups: Group A with seven patients (using CPB and group B with 9 patients (without the use of CPB. Gender, age, mean pulmonary artery pressure (MPAP, CPB time, aortic clamping time, venoatrial shunt, previous operations, time in intensive care unit (ICU, total hospitalization time and immediate complications were all compared between the two groups. RESULTS: The median MPAP was 13 mmHg. In group A the CPB time was 91 ± 47 minutes (57-195 minutes, myocardial ischemia was 25 ± 33 minutes (0-80 minutes. Of these four patients required intracardiac procedures or enlargement of the pulmonary branches and in three, CPB assistance as ventilatory support was needed. In group B the venoatrial shunt was 21 ± 10 minutes (0-39 minutes. The time to extubation was 9 ± 13 hours with a median of 3 hours (1-43 hours. The ICU stay was 8 ± 12 days with a median of 5 days (1-50 days. Hospitalization was 12 ± 12 days with a median of 7 days (0-50 days. Five patients had been submitted to surgeries previously. Two, one patient from each group, died (12.5%. No neurological complications, pleural or pericardial effusions were observed. No significant differences were evidenced between the two groups in respect to all the variables studied. CONCLUSION: In spite of the relatively small cohort, this study suggests that the bidirectional Glenn operation can be performed with or

  3. Adding machine and calculating machine

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In 1642 the French mathematician Blaise Pascal(1623-1662) invented a machine;.that could add and subtract. It had.wheels that each had: 1 to 10 marked off along its circumference. When the wheel at the right, representing units, made one complete circle, it engaged the wheel to its left, represents tens, and moved it forward one notch.

  4. Strategies to prevent intraoperative lung injury during cardiopulmonary bypass

    Directory of Open Access Journals (Sweden)

    Siminelakis Stavros N

    2010-01-01

    Full Text Available Abstract During open heart surgery the influence of a series of factors such as cardiopulmonary bypass (CPB, hypothermia, operation and anaesthesia, as well as medication and transfusion can cause a diffuse trauma in the lungs. This injury leads mostly to a postoperative interstitial pulmonary oedema and abnormal gas exchange. Substantial improvements in all of the above mentioned factors may lead to a better lung function postoperatively. By avoiding CPB, reducing its time, or by minimizing the extracorporeal surface area with the use of miniaturized circuits of CPB, beneficial effects on lung function are reported. In addition, replacement of circuit surface with biocompatible surfaces like heparin-coated, and material-independent sources of blood activation, a better postoperative lung function is observed. Meticulous myocardial protection by using hypothermia and cardioplegia methods during ischemia and reperfusion remain one of the cornerstones of postoperative lung function. The partial restoration of pulmonary artery perfusion during CPB possibly contributes to prevent pulmonary ischemia and lung dysfunction. Using medication such as corticosteroids and aprotinin, which protect the lungs during CPB, and leukocyte depletion filters for operations expected to exceed 90 minutes in CPB-time appear to be protective against the toxic impact of CPB in the lungs. The newer methods of ultrafiltration used to scavenge pro-inflammatory factors seem to be protective for the lung function. In a similar way, reducing the use of cardiotomy suction device, as well as the contact-time between free blood and pericardium, it is expected that the postoperative lung function will be improved.

  5. Experimental Investigation of Effect of Process Parameters on Mrr and Surface Roughness In Turning Operation on Conventional Lathe Machine For Aluminum 6082 Grade Material Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Mihir T. Patel

    2014-01-01

    Full Text Available In this study, the effect of the machining parameters like spindle speed, feed, depth of cut and nose radius on material removal rate and surface roughness are investigated, also optimum process parameters are studied. An L8 orthogonal array (mixed level design, analysis of variance (ANOVA and the signal –to-noise (S/N ratio are used in this study. Mixed levels of machining parameters are used and experiments are done on conventional lathe machine. Aluminum Alloy - Al 6082 grade material is used in high stress applications, Trusses, Bridges, Cranes, Transport applications, Ore skips, Beer barrels, Milk churns etc. The most significant parameters for material removal rate are speed, depth of cut and least significant factor for MRR is nose radius For surface roughness speed, nose radius are the most significant parameters and least significant factor for surface roughness is depth of cut. The mathematical model obtained as a result of regression analysis can be reliable to predict MRR and surface roughness Ra.

  6. Comparative Study and Detection of C-arm X-ray Machine Radiation Protection in the Operation Room%手术室C形臂X射线机的放射防护检测与对比研究

    Institute of Scientific and Technical Information of China (English)

    高华永; 刘帅; 苗路瑞; 蒋建; 晁勇

    2014-01-01

    本文测量了有防护和无防护手术间外X射线的辐射剂量,通过分析测量数据,说明了C形臂X射线机在无放射防护手术间中使用将对周围工作人员产生辐射危害,探讨手术间在无防护条件下电离辐射防护的解决方案。%The X-ray radiation doses in protected and non-protected operation room were measured. By analyzing the measurement data, it is proved that C-arm X-ray machine, without protection measures, will produce radiation hazard to the staff around the operation room. The solutions to the prevention of ionizing radiation in non-protected operation room are discussed in this paper.

  7. Genesis machines

    CERN Document Server

    Amos, Martyn

    2014-01-01

    Silicon chips are out. Today's scientists are using real, wet, squishy, living biology to build the next generation of computers. Cells, gels and DNA strands are the 'wetware' of the twenty-first century. Much smaller and more intelligent, these organic computers open up revolutionary possibilities. Tracing the history of computing and revealing a brave new world to come, Genesis Machines describes how this new technology will change the way we think not just about computers - but about life itself.

  8. Higgs Mass and Cross-Section Measurements at a 500 GeV CLIC Machine, Operating at sqrt(s) = 350 GeV and 500 GeV

    CERN Document Server

    Marshall, J

    2012-01-01

    Higgs mass and cross-section measurements have been examined to assess the capability of a 500 GeV CLIC machine, operating at centre-of-mass energies of 350 GeV and 500 GeV. A Higgs mass of 120 GeV and a luminosity of 500 fb−1 were assumed. Model-independent measurements were performed by examining the recoil of the Z in the Higgsstrahlung process, with the Z subsequently decaying to a pair of muons or electrons.

  9. The impact of avoiding cardiopulmonary by-pass during coronary artery bypass surgery in elderly patients: the Danish On-pump Off-pump Randomisation Study (DOORS)

    DEFF Research Database (Denmark)

    Houlind, Kim; Kjeldsen, Bo Juul; Madsen, Susanne Nørgaard;

    2009-01-01

    BACKGROUND: Coronary Artery Bypass Graft operation for ischemic heart disease provides improved quality of life and, in some patients, prolonged survival. Concern has, however, been raised about complications that may be related to the use of cardiopulmonary by-pass (CPB) and aortic cross-clampin...

  10. Gravity and Development of Cardiopulmonary Reflex

    Science.gov (United States)

    Nagaoka, Shunji; Eno, Yuko; Ohira, Yoshinobu

    Cardio-pulmonary reflex, which our cardiac activity is synchronized to the respiration by autonomic nervous system regulation, is called as "respiratory sinus arrhythmia" and commonly found in adult. The physiological function of the espiratory sinus arrhythmia is considered to maximize the gas exchange during respiration cycle. This respiration induced heart rate variability (RHRV) is only found in mammals and avian showing a remarkable postnatal development, whereas no RHRV in aquatic species such as fish or amphibian. To elucidate our hypothesis that gravity exposure may plays a key role in the postnatal development of RHRV as well as its evolutional origin in these ground animals, we have studied effects of hypergravity (2G) on the postnatal development of RHRV using rat. Pregnant Wister rats were kept in centrifugal cages system for 38 days from 6th days of pregnant mother to have neonates until 23 days old. Electrocardiograph was recorded from the neonates in 2 to 23 days old in 2G group with simultaneous control (1G) group. The RHRV analysis was performed by calculating a component of Fourier power spectral coincide with the respiration frequency. In both groups, averaged resting heart rate gradually increase from 2 to 23 days old. When comparing the heart rate between the two groups, the 2G group indicated significantly lower (240± 8 bpm) than 1G control (326±21 bpm, p¡0.001) in 2 days old, where as no significance in 23 days old. The RHRV of 2 days old neonates in both groups indicated very small magnitude but significantly lower in 2G group than 1G control (p¡0.01). The RHRV gradually increase during the first 2 weeks and then rapid increased to reached 45 fold of magnitude in 1G control, whereas 69 fold in 2G group. The results strongly suggested that the postnatal innervation from respiration to cardiovascular centers was gravity dependent.

  11. Teamwork and leadership in cardiopulmonary resuscitation.

    Science.gov (United States)

    Hunziker, Sabina; Johansson, Anna C; Tschan, Franziska; Semmer, Norbert K; Rock, Laura; Howell, Michael D; Marsch, Stephan

    2011-06-14

    Despite substantial efforts to make cardiopulmonary resuscitation (CPR) algorithms known to healthcare workers, the outcome of CPR has remained poor during the past decades. Resuscitation teams often deviate from algorithms of CPR. Emerging evidence suggests that in addition to technical skills of individual rescuers, human factors such as teamwork and leadership affect adherence to algorithms and hence the outcome of CPR. This review describes the state of the science linking team interactions to the performance of CPR. Because logistical barriers make controlled measurement of team interaction in the earliest moments of real-life resuscitations challenging, our review focuses mainly on high-fidelity human simulator studies. This technique allows in-depth investigation of complex human interactions using precise and reproducible methods. It also removes variability in the clinical parameters of resuscitation, thus letting researchers study human factors and team interactions without confounding by clinical variability from resuscitation to resuscitation. Research has shown that a prolonged process of team building and poor leadership behavior are associated with significant shortcomings in CPR. Teamwork and leadership training have been shown to improve subsequent team performance during resuscitation and have recently been included in guidelines for advanced life support courses. We propose that further studies on the effects of team interactions on performance of complex medical emergency interventions such as resuscitation are needed. Future efforts to better understand the influence of team factors (e.g., team member status, team hierarchy, handling of human errors), individual factors (e.g., sex differences, perceived stress), and external factors (e.g., equipment, algorithms, institutional characteristics) on team performance in resuscitation situations are critical to improve CPR performance and medical outcomes of patients.

  12. Managing the Inflammatory Response after Cardiopulmonary Bypass : Review of the Studies in Animal Models

    NARCIS (Netherlands)

    Liguori, Gabriel Romero; Kanas, Alexandre Fligelman; Moreira, Luiz Felipe Pinho

    2014-01-01

    OBJECTIVE: To review studies performed in animal models that evaluated therapeutic interventions to inflammatory response and microcirculatory changes after cardiopulmonary bypass. METHODS: It was used the search strategy ("Cardiopulmonary Bypass" (MeSH)) and ("Microcirculation" (MeSH) or "Inflammat

  13. Complications of cardiopulmonary resuscitation in non-traumatic cases and factors affecting complications

    Directory of Open Access Journals (Sweden)

    Umit Kaldırım

    2016-09-01

    It has been shown that during cardiopulmonary resuscitation, severe injuries can occur due to thoracic compression. Only a positive correlation with the duration of cardiopulmonary resuscitation was found in our study.

  14. Simulating Turing machines on Maurer machines

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2008-01-01

    In a previous paper, we used Maurer machines to model and analyse micro-architectures. In the current paper, we investigate the connections between Turing machines and Maurer machines with the purpose to gain an insight into computability issues relating to Maurer machines. We introduce ways to

  15. Environmentally Friendly Machining

    CERN Document Server

    Dixit, U S; Davim, J Paulo

    2012-01-01

    Environment-Friendly Machining provides an in-depth overview of environmentally-friendly machining processes, covering numerous different types of machining in order to identify which practice is the most environmentally sustainable. The book discusses three systems at length: machining with minimal cutting fluid, air-cooled machining and dry machining. Also covered is a way to conserve energy during machining processes, along with useful data and detailed descriptions for developing and utilizing the most efficient modern machining tools. Researchers and engineers looking for sustainable machining solutions will find Environment-Friendly Machining to be a useful volume.

  16. Hantavirus cardiopulmonary syndrome successfully treated with high-volume hemofiltration

    Science.gov (United States)

    Bugedo, Guillermo; Florez, Jorge; Ferres, Marcela; Roessler, Eric; Bruhn, Alejandro

    2016-01-01

    Hantavirus cardiopulmonary syndrome has a high mortality rate, and early connection to extracorporeal membrane oxygenation has been suggested to improve outcomes. We report the case of a patient with demonstrated Hantavirus cardiopulmonary syndrome and refractory shock who fulfilled the criteria for extracorporeal membrane oxygenation and responded successfully to high volume continuous hemofiltration. The implementation of high volume continuous hemofiltration along with protective ventilation reversed the shock within a few hours and may have prompted recovery. In patients with Hantavirus cardiopulmonary syndrome, a short course of high volume continuous hemofiltration may help differentiate patients who can be treated with conventional intensive care unit management from those who will require more complex therapies, such as extracorporeal membrane oxygenation. PMID:27410413

  17. C形臂X射线机术中应用的放射防护探讨%Radiation protection for the C-arm X-ray machine in operation

    Institute of Scientific and Technical Information of China (English)

    张为华; 倪卫东; 易光兆

    2011-01-01

    目的:加强C形臂X射线机术中应用的放射防护措施,保障医务人员和患者的健康。方法:采用辐射剂量检测仪,现场检测C形臂X射线机在术中应用时床边手术人员的受照剂量率,评价其放射防护情况。结果:C形臂X射线机在术中应用时,床边手术人员的头部、颈部、胸部、手部和腹部5个部位受照剂量检测均值超过国标准规定的限值,以胸部和手部受照剂量率较高。结论:C形臂X射线机术中应用时存在放射防护问题。须加强医务人员X射线防护技术的培训,采用屏蔽防护、时间防护及距离防护等综合防护措施,来降低医务人员的受照剂量,尽可能减少电离辐射对医务人员和患者健康的影响。%Objiective:To strengthen radiation protection for the C-arm X-ray machine in operation,and protect the health of the physicians and patients.Methods: We monitored the dose rate on the body of the physicians by radiation dose detector when the C-arm X-ray machines were using in operation,and assessed the radiation protection.Results: The mean of dose rate on the head,neck,chest,hand and abdomen of the physicians outnumbered the international standard,and the mean of dose rate on the chest and hand are higher than the rest three parts.Conclusion: Some problems of radiation protection exist in using the c-arm X-ray machine in operation,we must strengthen training for physicians in radiation protection,and adopt comprehensive measures including shielding protection,limitting the exposure time and trying to stay away from the C-arm X-ray machine,etc to avoid radiation damage.

  18. Machine Transliteration

    CERN Document Server

    Knight, K; Knight, Kevin; Graehl, Jonathan

    1997-01-01

    It is challenging to translate names and technical terms across languages with different alphabets and sound inventories. These items are commonly transliterated, i.e., replaced with approximate phonetic equivalents. For example, "computer" in English comes out as "konpyuutaa" in Japanese. Translating such items from Japanese back to English is even more challenging, and of practical interest, as transliterated items make up the bulk of text phrases not found in bilingual dictionaries. We describe and evaluate a method for performing backwards transliterations by machine. This method uses a generative model, incorporating several distinct stages in the transliteration process.

  19. 21 CFR 870.4270 - Cardiopulmonary bypass cardiotomy suction line blood filter.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass cardiotomy suction line... Devices § 870.4270 Cardiopulmonary bypass cardiotomy suction line blood filter. (a) Identification. A cardiopulmonary bypass cardiotomy suction line blood filter is a device used as part of a gas exchange (oxygenator...

  20. 21 CFR 870.4410 - Cardiopulmonary bypass in-line blood gas sensor.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass in-line blood gas sensor... Cardiopulmonary bypass in-line blood gas sensor. (a) Identification. A cardiopulmonary bypass in-line blood gas sensor is a transducer that measures the level of gases in the blood. (b) Classification. Class II...

  1. Research of physical and mechanical properties of electric steel, providing for the grate bars of the roasting and sintering machines improved operational stability

    Directory of Open Access Journals (Sweden)

    Олександр Давидович Учитель

    2016-07-01

    Full Text Available The grate bars of the conveyor roasting and sintering machines work in severe, aggressive dust and gaseous medium, under cyclic modes «heating-cooling», as well as under the load of iron ore agglomerates what results in bending stress in the body of the grate bar. Consequently, electric steel grate bar must be resistant to chemical and erosion processes, high cyclically changing temperature and have high mechanical properties. The paper discusses the conditions of the grate bars of conveyor roasting and sintering machines wear, depending on the adopted loading schemes. The materials to be processed can be loaded directly from the hopper (direct download or through the use of a feeder (drum-type feeder, roller, etc.. A simplified method to predict the grate bars surface wear on the strength of a number of assumptions has been developed: normal reaction of the pallet surface to the impact of the batch is assumed constant, equal to the maximum of its value when the pallet is in horizontal position; a layer of the batch moves as a rigid body; surface batch layer sliding velocity as related to the pallet surface is taken medium during the relative motion of the layer and equal to the linear velocity of the pallets; the side faces of the grate bars wear is related to related to the surface wear by linear dependence. The dependence of the wear on the friction forces and the steel wear resistance coefficient has been found out

  2. Effect of cardiopulmonary bypass on gastrointestinal perfusion and function.

    Science.gov (United States)

    Gaer, J A; Shaw, A D; Wild, R; Swift, R I; Munsch, C M; Smith, P L; Taylor, K M

    1994-02-01

    Gastric mucosal tonometry was used to determine the adequacy of gastrointestinal perfusion in 10 patients undergoing elective myocardial revascularization. Patients were prospectively randomized to receive either pulsatile or nonpulsatile flow during cardiopulmonary bypass. All patients showed a reduction in gastric mucosal perfusion during bypass, manifested by a reduction in the gastric mucosal pH, which occurred independently of variations in the arterial pH. In the group of patients receiving nonpulsatile flow, this reduction was significantly greater (p < 0.05). Cardiopulmonary bypass using nonpulsatile flow is associated with the development of a gastric mucosal acidosis, which may have implications for the development of postoperative complications.

  3. The use of VEPs for CNS monitoring during continuous cardiopulmonary bypass and circulatory arrest.

    Science.gov (United States)

    Keenan, N K; Taylor, M J; Coles, J G; Prieur, B J; Burrows, F A

    1987-07-01

    Cerebral function was monitored with the use of visual evoked potentials (VEPs) in 16 infants (mean age 9.9 +/- 4.3 months) during surgery for congenital cardiac anomalies. While hypothermia was employed in all patients, half (8) remained on continuous cardiopulmonary bypass (CCB) while the rest were cooled to lower temperatures before the induction of circulatory stasis and venous exsanguination (CA), i.e., profound hypothermic circulatory arrest (PHCA). VEPs were recorded before, during and after surgical intervention. Latency changes occurred in both the N100 and P145 components of the VEP as a function of systemic temperature during cooling in both groups. Differences in the VEPs were found between the two groups post-operatively, with the most interesting result being a greater increase in P145 latency in the CA group after rewarming. To the extent that VEPs reflect neurological status, our findings suggested that CCB was associated with less perturbation in acute neurological status than PHCA, and shorter arrest times and lower temperatures during CA were associated with the most favourable post-operative VEPs. Hence, intraoperative monitoring of VEPs appeared to be useful as an objective measure of the short-term effects of various cardiopulmonary procedures on neurophysiological function.

  4. Complications of bystander cardiopulmonary resuscitation for unconscious patients without cardiopulmonary arrest

    Directory of Open Access Journals (Sweden)

    Yoshihiro Moriwaki

    2012-01-01

    Full Text Available Background: Insufficient knowledge of the risks and complications of cardiopulmonary resuscitation (CPR may be an obstructive factor for CPR, however, particularly for patients who are not clearly suffering out of hospital cardiopulmonary arrest (OH-CPA. The object of this study was to clarify the potential complication, the safety of bystander CPR in such cases. Materials and Methods: This study was a population-based observational case series. To be enrolled, patients had to have undergone CPR with chest compressions performed by lay persons, had to be confirmed not to have suffered OHCPA. Complications of bystander CPR were identified from the patients′ medical records and included rib fracture, lung injury, abdominal organ injury, and chest and/or abdominal pain requiring analgesics. In our emergency department, one doctor gathered information while others performed X-ray and blood examinations, electrocardiograms, and chest and abdominal ultrasonography. Results: A total of 26 cases were the subjects. The mean duration of bystander CPR was 6.5 minutes (ranging from 1 to 26. Nine patients died of a causative pathological condition and pneumonia, and the remaining 17 survived to discharge. Three patients suffered from complications (tracheal bleeding, minor gastric mucosal laceration, and chest pain, all of which were minimal and easily treated. No case required special examination or treatment for the complication itself. Conclusion: The risk and frequency of complications due to bystander CPR is thought to be very low. It is reasonable to perform immediate CPR for unconscious victims with inadequate respiration, and to help bystanders perform CPR using the T-CPR system.

  5. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    Directory of Open Access Journals (Sweden)

    Berat Barıs BULDUM

    2013-01-01

    Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

  6. Cyclic flow shop scheduling problem with two-machine cells

    Directory of Open Access Journals (Sweden)

    Bożejko Wojciech

    2017-06-01

    Full Text Available In the paper a variant of cyclic production with setups and two-machine cell is considered. One of the stages of the problem solving consists of assigning each operation to the machine on which it will be carried out. The total number of such assignments is exponential. We propose a polynomial time algorithm finding the optimal operations to machines assignment.

  7. [Assisted circulation with the heart-lung machine after cardiosurgical interventions: one year's experience with intra-aortal counter-pulsation with the heart-lung machine after cardiosurgical operations is reported (author's transl)].

    Science.gov (United States)

    Reichart, B; Kemkes, B; Kreuzer, E; Klinner, W; Holtz, J

    1978-02-17

    In the period from September 1976 to 1977, aortic or mitral valve replacement was performed in 84 and 34 patients respectively. Cardiogenic shock occurred during or immediately after the operation in 3 and 2 patients respectively (= 8.8% and 2.4%). In spite of the use of intra-aortal counter-pulsation, none of the patients survived the acute event. During the same period, 8 (= 5%) out of 113 patients who had undergone coronary surgery needed intra-aortal counter-pulsation. 4 of them survived the acute left heart failure and at the present time are clinically healthy (N.Y. Heart Association Class II).

  8. Analysis of machining and machine tools

    CERN Document Server

    Liang, Steven Y

    2016-01-01

    This book delivers the fundamental science and mechanics of machining and machine tools by presenting systematic and quantitative knowledge in the form of process mechanics and physics. It gives readers a solid command of machining science and engineering, and familiarizes them with the geometry and functionality requirements of creating parts and components in today’s markets. The authors address traditional machining topics, such as: single and multiple point cutting processes grinding components accuracy and metrology shear stress in cutting cutting temperature and analysis chatter They also address non-traditional machining, such as: electrical discharge machining electrochemical machining laser and electron beam machining A chapter on biomedical machining is also included. This book is appropriate for advanced undergraduate and graduate mechani cal engineering students, manufacturing engineers, and researchers. Each chapter contains examples, exercises and their solutions, and homework problems that re...

  9. Optimization experiment of operating parameters on vibration sorting-clip device for vegetable grafting machine%蔬菜嫁接机嫁接夹振动排序装置工作参数优化试验

    Institute of Scientific and Technical Information of China (English)

    田素博; 杨继峰; 王瑞丽; 徐冬雷; 李天来

    2014-01-01

    selected as the experimental factors, i.e. input vibration voltage, installing angle, and the installing length of the screening dam bar. The variation coefficient of sorting clips that represented the performance of sorting grafting clips was determined as the experimental index. Moreover, the single factor experiment and two regression orthogonal experiments were conducted in order to determine the optimal technological parameters of the vibration sorting-clip device. The single factor experiments studied the influence of input vibration voltage, installing angle, and installing length on variation coefficient of sorting clips, respectively. According to the results of single factor experiment, the two regression orthogonal experiments were conducted after selecting two reasonable values within the effective range as two levels. The optimal operating parameters of the vibration sorting-clip device for the vegetable grafting machine were determined by the experiment. The input vibratory voltage of the sorting device was 40V, the installing angle of the screening dam bar was 25.7 degrees, the installing length of the screening dam bar was 45.5 millimeters, and the variation coefficient of the sorting clips was 0.6822. The parameters proved to be the best performance of the sorting grafting clips until the present. The success rate was 100% and the working efficiency was 70 per min by using the above parameters. Under the conditions of the optimal operating parameters, the vibration sorting-clip device of the vegetable grafting machine can meet the requirements of design. Therefore, the vibration sorting clips device can achieve automatic conveying and sorting of vegetable grafting clips successfully, and the experimental results provide important references for developing an automatic vegetable grafting machine.%为解决蔬菜嫁接夹外形结构复杂导致自动排序困难的问题,该文设计了贴接嫁接机嫁接夹振动排序装置,并采用试验方法对

  10. Diamond turning machine controller implementation

    Energy Technology Data Exchange (ETDEWEB)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  11. Hypothermia During Cardiopulmonary Bypass Increases Need for Inotropic Support but Does Not Impact Inflammation in Children Undergoing Surgical Ventricular Septal Defect Closure.

    Science.gov (United States)

    Schmitt, Katharina Rose Luise; Fedarava, Katsiaryna; Justus, Georgia; Redlin, Mathias; Böttcher, Wolfgang; Delmo Walter, Eva Maria; Hetzer, Roland; Berger, Felix; Miera, Oliver

    2016-05-01

    Minimizing the systemic inflammatory response caused by cardiopulmonary bypass is a major concern. It has been suggested that the perfusion temperature affects the inflammatory response. The aim of this prospective study was to compare the effects of moderate hypothermia (32°C) and normothermia (36°C) during cardiopulmonary bypass on markers of the inflammatory response and clinical outcomes (time on ventilator) after surgical closure of ventricular septal defects. During surgical closure of ventricular septal defects under cardiopulmonary bypass, 20 children (median age 4.9 months, range 2.3-38 months; median weight 7.2 kg, range 5.2-11.7 kg) were randomized to a perfusion temperature of either 32°C (Group 1, n = 10) or 36°C (Group 2, n = 10). The clinical data and blood samples were collected before cardiopulmonary bypass, directly after aortic cross-clamp release, and 4 and 24 h after weaning from cardiopulmonary bypass. Time on ventilation as primary outcome did not differ between the two groups. Other clinical outcome parameters like fluid balance or length of stay in the intensive care were also similar in the two groups. Compared with Group 2, Group 1 needed significantly higher and longer inotropic support (P bypass temperature does not influence time on ventilation or inflammatory marker release. However, in the present study, with a small patient cohort, patients operated under hypothermic bypass needed higher and longer inotropic support. The use of hypothermic cardiopulmonary bypass in infants and children should be approached with care.

  12. The influence of biomaterials on inflammatory responses to cardiopulmonary bypass.

    Science.gov (United States)

    Courtney, J M; Matata, B M; Yin, H Q; Esposito, A; Mahiout, A; Taggart, D P; Lowe, G D

    1996-05-01

    The nature of cardiopulmonary bypass and the complexity of the inflammatory response make the detection and interpretation of a biomaterial influence difficult. However, if mediation of the inflammatory response is considered to be an appropriate clinical goal, alteration to the biomaterial influence merits further investigation.

  13. Cardiopulmonary resuscitation: biomedical and biophysical analysis (Chapter XXX)

    DEFF Research Database (Denmark)

    Noordergraaf, G.J; Ottesen, Johnny T.; Scheffer, G.J.

    2004-01-01

    The evolution of the human in caring for others is reflected in the development of cardiopulmonary resuscitation (CPR). Superstition, divine intervention and finally science have contributed to the development of a technique which may allow any person to save another’s life. Fully 50% of the firs...

  14. Gastrointestinal motility during cardiopulmonary bypass : A sonomicrometric study

    NARCIS (Netherlands)

    Gu, YJ; de Kroon, TL; Elstrodt, JM; Rakhorst, G

    2006-01-01

    Cardiopulmonary bypass (CPB) is known to impair the integrity of the gastrointestinal tract. However, little is known about the movement behavior of the gastrointestinal tract during CPB. This study was aimed to assess the gastrointestinal motility with sonomicrometry, a distance measurement using u

  15. Cardiopulmonary interactions during mechanical ventilation in critically ill patients

    NARCIS (Netherlands)

    T.G.V. Cherpanath (Thomas); W.K. Lagrand (Wim); M.J. Schultz (Marcus); A.B.J. Groeneveld (Johan)

    2013-01-01

    textabstractCardiopulmonary interactions induced by mechan-ical ventilation are complex and only partly understood. Ap-plied tidal volumes and/or airway pressures largely mediate changes in right ventricular preload and afterload. Effects on left ventricular function are mostly secondary to changes

  16. QUALITY-OF-LIFE AFTER CARDIOPULMONARY-RESUSCITATION

    NARCIS (Netherlands)

    MIRANDA, DR

    Objectives: This study evaluates the influence of Cardiopulmonary Resuscitation (CPR) on the components of quality of life (QOL) of patients after discharge from the hospital. Design: Extracted from a prospective national survey on Dutch intensive care units (ICUs). Setting: Thirty-six ICUs of both

  17. Cardiopulmonary Fitness and Endurance in Children with Developmental Coordination Disorder

    Science.gov (United States)

    Wu, Sheng K.; Lin, Hsiao-Hui; Li, Yao-Chuen; Tsai, Chia-Liang; Cairney, John

    2010-01-01

    The purpose of this study was to compare cardiopulmonary fitness and endurance in 9-11-year-old children with DCD against a group of typically developing children in Taiwan. The Movement ABC test was used to evaluate the motor abilities of children. Forty-one participants (20 children with DCD and 21 children without DCD) were recruited for this…

  18. Cardiopulmonary resuscitation: biomedical and biophysical analysis (Chapter XXX)

    DEFF Research Database (Denmark)

    Noordergraaf, G.J; Ottesen, Johnny T.; Scheffer, G.J.

    2004-01-01

    The evolution of the human in caring for others is reflected in the development of cardiopulmonary resuscitation (CPR). Superstition, divine intervention and finally science have contributed to the development of a technique which may allow any person to save another’s life. Fully 50% of the firs...

  19. Family presence during cardiopulmonary resuscitation and invasive procedures in children

    Directory of Open Access Journals (Sweden)

    Cristiana Araujo G. Ferreira

    2014-03-01

    Full Text Available Objective: To identify literature evidences related to actions to promote family's presence during cardiopulmonary resuscitation and invasive procedures in children hospitalized in pediatric and neonatal critical care units. Data sources : Integrative literature review in PubMed, SciELO and Lilacs databases, from 2002 to 2012, with the following inclusion criteria: research article in Medicine, or Nursing, published in Portuguese, English or Spanish, using the keywords "family", "invasive procedures", "cardiopulmonary resuscitation", "health staff", and "Pediatrics". Articles that did not refer to the presence of the family in cardiopulmonary resuscitation and invasive procedures were excluded. Therefore, 15 articles were analyzed. Data synthesis : Most articles were published in the United States (80%, in Medicine and Nursing (46%, and were surveys (72% with healthcare team members (67% as participants. From the critical analysis, four themes related to the actions to promote family's presence in invasive procedures and cardiopulmonary resuscitation were obtained: a to develop a sensitizing program for healthcare team; b to educate the healthcare team to include the family in these circumstances; c to develop a written institutional policy; d to ensure the attendance of family's needs. Conclusions: Researches on these issues must be encouraged in order to help healthcare team to modify their practice, implementing the principles of the Patient and Family Centered Care model, especially during critical episodes.

  20. 21 CFR 870.4350 - Cardiopulmonary bypass oxygenator.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass oxygenator. 870.4350 Section 870.4350 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... gases between blood and a gaseous environment to satisfy the gas exchange needs of a patient during...

  1. Necessity of immediate cardiopulmonary resuscitation in trauma emergency

    Directory of Open Access Journals (Sweden)

    Luciano Baitello

    2010-08-01

    Full Text Available Abstract The ability to respond quickly and effectively to a cardiac arrest situation rests on nurses being competent in the emergency life-saving procedure of cardiopulmonary resuscitation. The objective of the current study was to evaluate the types of trauma and survival of patients that require immediate cardiopulmonary resuscitation in trauma emergencies. A total of 13301 patients treated as accident victims between July 2004 and December 2006 were evaluated in a prospective study. Patients requiring immediate cardiopulmonary resuscitation at admission were identified. The type of injury and the survival of these patients were evaluated. Of the 65 patients included in the study, 30% had suffered from gunshot wounds, 19% had been run over, 18% had been involved in car crashes, 13% in motor cycle accidents, 9% stabbings, 1% by cycle accidents and 10% other types of accidents including burns, hangings and falls. In only 12 of these patients, immediate resuscitation was successful and procedure such as chest drainage, exploratory laparotomy and interventions in the surgical center were performed. However all patients evolved to death; eight within 24 hours, two between 24 and 48 hours and the other 2 after 48 hours. Immediate cardiopulmonary resuscitation after accidents is a sign of high mortality requiring further studies to review indication and the ethical aspects involved.

  2. [Effects of airborne pollution on cardiopulmonary function of healthy person].

    Science.gov (United States)

    Liu, Xiaoli; Song, Xianqiang; Meng, Ziqiang

    2008-07-01

    To understand the effects of airborne pollution on cardiopulmonary function in healthy person. 15 healthy workers were selected from heavily polluted area as the experimental group (EG) and 15 healthy workers were selected from relatively clean area as control group (CG). The blood pressure were measured with sphygmomanometer and the vital capacity (VC) were detected with FHL-II type spirometer at rest status. Cardiopulmonary functions in different exercise states were measured by using the cardiopulmonary exercise testing (CPET). It showed that heart rate of EG was more higher than those of the CG at rest status (P VO2, VO2/kg, O2P and METS in CG were more higher than these indexes in EG (P VO2 max, the results of VO2 max, VO2 max/kg, O2P, METS and DT in CG were more higher than these indexes in EG (P < 0.01), and the recovery of heart rate in EG was slow in comparison with CG. Airborne pollution could have adverse effects on the cardiopulmonary function, reserve ability and function potential. The chronic adverse effects of airborne pollution on the health could be easy to reflect at static state. Therefore CPET could roundly evaluate the damage of airborne pollution to cardiorespiratory function.

  3. Cardiopulmonary fitness is related to disease severity in multiple sclerosis

    NARCIS (Netherlands)

    Heine, Martin; Wens, Inez; Langeskov-Christensen, Martin; Verschuren, Olaf|info:eu-repo/dai/nl/304819670; Eijnde, Bert O; Kwakkel, Gert; Dalgas, Ulrik

    2015-01-01

    BACKGROUND: In persons with MS (pwMS), a lower cardiopulmonary fitness has been associated with a higher risk for secondary disorders, decreased functional capacity, symptom worsening and reduced health-related quality of life. OBJECTIVE: To investigate the association between disease severity and c

  4. Clinical benefit of steroid use in patients undergoing cardiopulmonary bypass

    DEFF Research Database (Denmark)

    Whitlock, Richard P; Chan, Simon; Devereaux, P J;

    2008-01-01

    We sought to establish the efficacy and safety of prophylactic steroids in adult patients undergoing cardiopulmonary bypass (CPB). We performed a meta-analysis of randomized trials reporting the effects of prophylactic steroids on clinical outcomes after CPB. Outcomes examined were mortality...

  5. Effects of sevoflurane on cardiopulmonary function in patients undergoing coronary artery bypass.

    Science.gov (United States)

    Zhang, J; Wang, S

    2016-01-01

    The objective of the current study was to investigate effects of sevoflurane on cardiopulmonary function in patients undergoing coronary artery bypass grafting (CABG). In this study, 60 cases of patients with coronary heart disease (CHD) were selected and randomly divided into the sevoflurane group (group S) and the control group C (group C) with 30 cases in each group. The two groups received intravenous anesthesia. The patients of group C were only given oxygen mask and physiological saline to keep vein open; while the patients of group S were administered with 1% sevoflurane immediately after the beginning of cardiopulmonary bypass (CPB) until the end of the treatment. The cardiopulmonary functions at 30 min before operation (T0), postoperative 2 h (T1), 6h (T2), 24h (T3) and 48 (T4) were observed. The mean arterial pressure (MAP) of the group S at T1, T2, T3 was lower than that of the group C, as were the heart rate (HR) and left ventricular ejection fraction (LVEF). The creatine kinase isoenzyme (CK-MB) during T1 to T4 in the group S was less than that of the group C, and there were significant differences between the two groups (P less than 0.05). The tidal volume (Vt), vital capacity (Vc) and oxygenation index (PaO2/FiO2) of the two groups during T1 and T2 were decreased, while respiratory frequency (RR) and alveolar-arterial blood oxygen partial pressure (PA-aO2) were increased and they began to decrease during T3 and T4. Vt and Vc of the group S were higher during T1 and T2 periods than those of the group C, while RR was lower than that of the group C; PaO2 / FiO2 during T1 to T4 period of group S was higher than that of group C, while PA-aO2 was significantly lower than that of the control group (P less than 0.05). In conclusion, although LVEF was not improved in the sevoflurane group, sevoflurane may contribute to stabilizing the cardiopulmonary function and preventing from myocardial injury.

  6. Speed-Selector Guard For Machine Tool

    Science.gov (United States)

    Shakhshir, Roda J.; Valentine, Richard L.

    1992-01-01

    Simple guardplate prevents accidental reversal of direction of rotation or sudden change of speed of lathe, milling machine, or other machine tool. Custom-made for specific machine and control settings. Allows control lever to be placed at only one setting. Operator uses handle to slide guard to engage or disengage control lever. Protects personnel from injury and equipment from damage occurring if speed- or direction-control lever inadvertently placed in wrong position.

  7. Active Control of Machine Tool Chatter

    OpenAIRE

    Håkansson, Lars; Claesson, Ingvar; Lagö, Thomas L.

    1999-01-01

    In the turning operation chatter or vibration is a frequent problem, which affects the result of the machining, and, in particular, the surface finish. Tool life is also influenced by vibration. Severe acoustic noise in the working environment frequently occurs as a result of dynamic motion between the cutting tool and the workpiece. By proper machine design, e.g. improved stiffness of the machine structure, the problem of relative dynamic motion between cutting tool and workpiece may be part...

  8. Behind the machines

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    One of the first things we think about when someone mentions physics is the machines. But behind the machines, there are the men and women who design, build and operate them. In an exhibition at the Thinktank planetarium’s art gallery in Birmingham (UK), Claudia Marcelloni and her husband Neal Hartman—she is a photographer and Outreach Officer for ATLAS, while he is an engineer working on the ATLAS pixel detector—explore the human side of scientists.   The exhibition at the Thinktank Planetarium art gallery, Birmingham (UK). It all began two years ago with the publication of Exploring the mystery of matter, a book about ATLAS. “A Norwegian physicist friend, Heidi Sandaker, saw my photographs and suggested that I display them in a museum. I thought this was an interesting idea, except that the photos consisted entirely of depictions of machinery, with human beings completely absent. For me, showing the people who are behind the machines and the fascination ...

  9. Daphne machine project

    Energy Technology Data Exchange (ETDEWEB)

    Vignola, G. and Daphne Project Team [Istituto Nazionale di Fisica Nucleare, Frascati (Italy)

    1996-07-01

    Daphne, a high luminosity e{sup +}/e{sup -} {Phi} factory, is presently under construction in Frascati. The beginning of the collider commissioning is scheduled by winter 1997, with a short term luminosity goal L=1.3 10{sup 32} cm{sup -2} sec{sup -1}. Daphne shall be the first of the new generation of very high luminosity colliders, called factories, to come in operation. Other factories under construction are PEP-II and KEK-B: first collision, for both machines, is planned for 1998.

  10. Management of a case of left tracheal sleeve pneumonectomy under cardiopulmonary bypass: Anesthesia perspectives

    Directory of Open Access Journals (Sweden)

    Aman Jyoti

    2014-01-01

    Full Text Available The lung tumors with carinal involvement are frequently managed with tracheal sleeve pneumonectomy and tracheobronchial anastomosis without use of cardiopulmonary bypass (CPB. Various modes of ventilation have been described during tracheal resection and anastomosis. Use of CPB during this period allows the procedure to be conducted in a more controlled way. We performed tracheal sleeve pneumonectomy for adenoid cystic carcinoma of left lung involving carina. The surgery was performed in two stages. In the first stage, left pneumonectomy was performed and in the second stage after 48 h, tracheobronchial resection and anastomosis was performed under CPB. Second stage was delayed to avoid excessive bleeding (due to heparinization from the extensive vascular raw area left after pneumonectomy. Meticulous peri-operative planning and optimal post-operative care helped in successful management of a complex case, which is associated with high morbidity and mortality.

  11. Handbook of machine soldering SMT and TH

    CERN Document Server

    Woodgate, Ralph W

    1996-01-01

    A shop-floor guide to the machine soldering of electronics Sound electrical connections are the operational backbone of every piece of electronic equipment-and the key to success in electronics manufacturing. The Handbook of Machine Soldering is dedicated to excellence in the machine soldering of electrical connections. Self-contained, comprehensive, and down-to-earth, it cuts through jargon, peels away outdated notions, and presents all the information needed to select, install, and operate machine soldering equipment. This fully updated and revised volume covers all of the new technologies and processes that have emerged in recent years, most notably the use of surface mount technology (SMT). Supplemented with 200 illustrations, this thoroughly accessible text Describes reflow and wave soldering in detail, including reflow soldering of SMT boards and the use of nitrogen blankets * Explains the setup, operation, and maintenance of a variety of soldering machines * Discusses theory, selection, and control met...

  12. Automation of printing machine

    OpenAIRE

    Sušil, David

    2016-01-01

    Bachelor thesis is focused on the automation of the printing machine and comparing the two types of printing machines. The first chapter deals with the history of printing, typesettings, printing techniques and various kinds of bookbinding. The second chapter describes the difference between sheet-fed printing machines and offset printing machines, the difference between two representatives of rotary machines, technological process of the products on these machines, the description of the mac...

  13. Earlier application of percutaneous cardiopulmonary support rescues patients from severe cardiopulmonary failure using the APACHE III scoring system.

    Science.gov (United States)

    Song, Suk-Won; Yang, Hong-Suk; Lee, Sak; Youn, Young-Nam; Yoo, Kyung-Jong

    2009-12-01

    Percutaneous cardiopulmonary support (PCPS) is a widely accepted treatment for severe cardiopulmonary failure. This system, which uses a percutaneous approach and autopriming devices, can be rapidly applied in emergency situations. We sought to identify the risk factors that could help predict in-hospital mortality, and to assess its outcomes in survivors. During a 2-yr period, 50 patients underwent PCPS for the treatment of severe cardiopulmonary failure, and of those, 22 (44%) were classified as survivors and 28 (56%) as non-survivors. We compared the 2 groups for risk factors of in-hospital mortality and to establish proper PCPS timing. Twenty patients underwent PCPS for acute myocardial infarction, 20 for severe cardiopulmonary failure after cardiac surgery, 7 for acute respiratory distress syndrome, and 3 for acute myocarditis. Multivariate analysis showed that an acute physiology, age, and chronic health evaluation (APACHE) III score >or=50 prior to PCPS was the only significant predictor of in-hospital mortality (P=0.001). Overall 18-month survival was 42.2%. Cox analysis showed patients with APACHE III scores >or=50 had a poor prognosis (P=0.001). Earlier application of PCPS, and other preemptive strategies designed to optimize high-risk patients, may improve patient outcomes. Identifying patients with high APACHE scores at the beginning of PCPS may predict in-hospital mortality. Survivors, particularly those with higher APACHE scores, may require more frequent follow-up to improve overall survival.

  14. Aerosols generated during beryllium machining.

    Science.gov (United States)

    Martyny, J W; Hoover, M D; Mroz, M M; Ellis, K; Maier, L A; Sheff, K L; Newman, L S

    2000-01-01

    Some beryllium processes, especially machining, are associated with an increased risk of beryllium sensitization and disease. Little is known about exposure characteristics contributing to risk, such as particle size. This study examined the characteristics of beryllium machining exposures under actual working conditions. Stationary samples, using eight-stage Lovelace Multijet Cascade Impactors, were taken at the process point of operation and at the closest point that the worker would routinely approach. Paired samples were collected at the operator's breathing zone by using a Marple Personal Cascade Impactor and a 35-mm closed-faced cassette. More than 50% of the beryllium machining particles in the breathing zone were less than 10 microns in aerodynamic diameter. This small particle size may result in beryllium deposition into the deepest portion of the lung and may explain elevated rates of sensitization among beryllium machinists.

  15. The research of Integrative medicine to improve elderly patients with bowel dysfunction after cardiopulmonary bypass%中西医结合改善高龄患者体外循环后肠功能障碍

    Institute of Scientific and Technical Information of China (English)

    张治国; 洪暄; 孙梅; 叶亮; 李铁岩; 范慧敏; 刘中民

    2012-01-01

    目的 探讨中西医结合治疗高龄患者体外循环后肠功能障碍的效果.方法 选取高龄患者54例,随机分为对照组、谷氨酰胺( Gln)组和中西联合组,Gln组在术日CPB开始后和术后2天内分别静脉给予Gln 0.4g/kg.联合组在Gln的基础上根据中医分型,于术前及术后给与不同中药制剂.术前及术后即刻、1天和2天检测血浆内毒素、白细胞介素-6( IL-6)以及二胺氧化酶(DAO)含量,同时应用彩色多普勒仪,于患者肠系膜上动脉的起始2 cm内进行检测舒张期峰值流速(EDV)、搏动指数(PI).结果 与对照组比较,体外循环后Gln组血浆内毒素水平、IL-6和DAO水平均降低.体外循环后及术后1天联合组较Gln组内毒素、IL-6以及DAO水平均降低.彩色多普勒分析EDV及PI,与对照组相比,联合组及Gln组术后EDV明显升高,PI降低,术后即刻及术后1天差异有统计学意义(p<0.05).结论 谷氨酰胺二肽对体外循环后的肠黏膜屏障有一定的保护作用,联合应用中医药制剂更有利于高龄患者体外循环后肠功能的恢复.%Objective To study the effects of improving elderly patients with bowel dysfunction after cardiopulmonary bypass.Methods Choose 54 elderly patients with CPB were randomly divided into tree groups:the control group and the Gln group and the Combination group,every group has 18 patients.Glutamine(Gln) at 0.4 g/kg was administrated to the patients in the Gln group and the combination group during the beginning at CPB and two days after the operation.Based on the Gln group,the patients of The Combination group were given the different oral Chinese medicine before and after operation,according to syndrome differentiation classification.Plasma endotoxin,IL-6 and DAO were measured before operation and at the endof operation and 24 h,48 h after operation.At the same time,we used German Siemens Company's X3000 Color Doppler machine to test every group of patients superior mesenteric artery

  16. An industrial sewing machine variable speed controller

    Science.gov (United States)

    Estes, Christa; Spiggle, Charles; Swift, Shannon; Vangeffen, Stephen; Youngner, Frank

    The apparel industry is attempting to move in a new direction in the coming decade. Since the invention of an electrically powered sewing machine, the operator has been seated. Today, companies are switching from a sit down operation to a stand up operation involving modular stations. The old treadle worked well with the sitting operator, but problems have been found when trying to use the same treadle with a standing operator. This report details a new design for a treadle to operate an industrial sewing machine that has a standing operator. Emphasis is placed on the ease of use by the operator, as well as the ergonomics involved. Procedures for testing the design are included along with possible uses for the treadle in other applications besides an industrial sewing machine.

  17. A survey of infinite time Turing machines

    NARCIS (Netherlands)

    Hamkins, J.D.

    2007-01-01

    Infinite time Turing machines extend the operation of ordinary Turing machines into transfinite ordinal time, thereby providing a natural model of infinitary computability, with robust notions of computability and decidability on the reals, while remaining close to classical concepts of computabilit

  18. 49 CFR 236.771 - Machine, control.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Machine, control. 236.771 Section 236.771..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.771 Machine, control. An assemblage of manually operated devices for controlling the functions of a...

  19. Machine Tool Series. Duty Task List.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This task list is intended for use in planning and/or evaluating a competency-based course to prepare machine tool, drill press, grinding machine, lathe, mill, and/or power saw operators. The listing is divided into six sections, with each one outlining the tasks required to perform the duties that have been identified for the given occupation.…

  20. High Temperature Superconductor Machine Prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2011-01-01

    A versatile testing platform for a High Temperature Superconductor (HTS) machine has been constructed. The stationary HTS field winding can carry up to 10 coils and it is operated at a temperature of 77K. The rotating armature is at room temperature. Test results and performance for the HTS field...

  1. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study deve

  2. Connection between machines durability during operation and the complex of physic-mechanical properties, formed during the production of critical parts

    Science.gov (United States)

    Shibakov, V. G.; Pankratov, D. L.; Shibakov, R. V.

    2014-12-01

    The paper presents the effect of the processing technological structure on the hardening of metals and alloys by choosing the rational parameters of thermomechanical forming components at various stages of processing. The dependencies that can predict the destruction of the product during operation, depending on the structure oi the resulting metal fabrication are shown.

  3. Machine Protection System response in 2011

    CERN Document Server

    Zerlauth, M; Wenninger, J

    2012-01-01

    The performance of the machine protection system during the 2011 run is summarized in this paper. Following an analysis of the beam dump causes in comparison to the previous 2010 run, special emphasis will be given to analyse events which risked to exposed parts of the machine to damage. Further improvements and mitigations of potential holes in the protection systems as well as in the change management will be evaluated along with their impact on the 2012 run. The role of the restricted Machine Protection Panel ( rMPP ) during the various operational phases such as commissioning, the intensity ramp up and Machine Developments is being discussed.

  4. Introduction to the theory of flow machines

    CERN Document Server

    Betz, Albert

    1966-01-01

    Introduction to the Theory of Flow Machines details the fundamental processes and the relations that have a significant influence in the operating mechanism of flow machines. The book first covers the general consideration in flow machines, such as pressure, stress, and cavitation. In the second chapter, the text deals with ducts; this chapter discusses the general remarks, types of flow, and mixing process. Next, the book tackles the types of cascades, along with its concerns. The closing chapter covers the flow machine and its components, such as turbine, wheels, engines, and propellers. The

  5. Research on Magnetic Levitation Operation Mechanism of Permanent Magnet Linear Motor in CNC Machine Tool%数控机床永磁直线电动机磁悬浮运行机制研究

    Institute of Scientific and Technical Information of China (English)

    蓝益鹏; 张振兴

    2012-01-01

    为实现数控机床永磁直线同步电动机的磁悬浮运行,须对电动机的电磁推力和悬浮力进行实时控制.电磁推力和悬浮力的计算是数控机床磁悬浮永磁直线同步电动机设计及控制的基础.根据数控机床永磁直线同步电动机的磁悬浮运行机制,推导出电动机的电磁推力和悬浮力与电流之间关系的数学模型.并用Ansoft对电磁推力和悬浮力进行有限元分析,将解析计算结果与Ansoft的计算结果进行比较,验证了数学模型的有效性与正确性,为数控机床永磁直线同步电动机磁悬浮控制系统的分析与设计提供依据.%Real-time control to electromagnetic thrust and levitation force is necessary in order to realize magnetic levitation stable operation of the permanent magnet linear motor in CNC machine tool. The calculations of electromagnetic thrust and levitation force are the foundation of magnetic levitalion permanent magnet linear synchronous motor design and control. Mathematical models of electromagnetic thrust and magnetic levitation force were derived based on the operating principle of double winding levitation permanent magnet linear synchronous motor in CNC machine tool. Further more, finite element analyses of electromagnetic thrust and levitation force were completed by Ansoft. Trie comparison between calculation results and simulation results confirms the correctness and effectiveness of the proposed mathematical model, which provides a basis for analysis and design of permanent magnet linear motor magnetic levitation control system in CNC machine tool.

  6. Theoretical study and design of a low-grade heat-driven pilot ejector refrigeration machine operating with butane and isobutane and intended for cooling of gas transported in a gas-main pipeline

    KAUST Repository

    Petrenko, V.O.

    2011-11-01

    This paper describes the construction and performance of a novel combined system intended for natural gas transportation and power production, and for cooling of gas transported in a gas-main pipeline. The proposed system includes a gas turbine compressor, a combined electrogenerating plant and an ejector refrigeration unit operating with a hydrocarbon refrigerant. The combined electrogenerating plant consists of a high-temperature steam-power cycle and a low-temperature hydrocarbon vapor power cycle, which together comprise a binary vapor system. The combined system is designed for the highest possible effectiveness of power generation and could find wide application in gas-transmission systems of gas-main pipelines. Application of the proposed system would enable year-round power generation and provide cooling of natural gas during periods of high ambient temperature operation. This paper presents the main results of a theoretical study and design performance specifications of a low-grade heat-driven pilot ejector refrigeration machine operating with butane and isobutane. © 2010 Elsevier Ltd and IIR. All rights reserved.

  7. Cardiopulmonary Exercise Test: Background, Applicability and Interpretation.

    Science.gov (United States)

    Herdy, Artur Haddad; Ritt, Luiz Eduardo Fonteles; Stein, Ricardo; Araújo, Claudio Gil Soares de; Milani, Mauricio; Meneghelo, Romeu Sérgio; Ferraz, Almir Sérgio; Hossri, Carlos; Almeida, Antonio Eduardo Monteiro de; Fernandes-Silva, Miguel Morita; Serra, Salvador Manoel

    2016-11-01

    Cardiopulmonary exercise test (CPET) has been gaining importance as a method of functional assessment in Brazil and worldwide. In its most frequent applications, CPET consists in applying a gradually increasing intensity exercise until exhaustion or until the appearance of limiting symptoms and/or signs. The following parameters are measured: ventilation; oxygen consumption (VO2); carbon dioxide production (VCO2); and the other variables of conventional exercise testing. In addition, in specific situations, pulse oximetry and flow-volume loops during and after exertion are measured. The CPET provides joint data analysis that allows complete assessment of the cardiovascular, respiratory, muscular and metabolic systems during exertion, being considered gold standard for cardiorespiratory functional assessment.1-6 The CPET allows defining mechanisms related to low functional capacity that can cause symptoms, such as dyspnea, and correlate them with changes in the cardiovascular, pulmonary and skeletal muscle systems. Furthermore, it can be used to provide the prognostic assessment of patients with heart or lung diseases, and in the preoperative period, in addition to aiding in a more careful exercise prescription to healthy subjects, athletes and patients with heart or lung diseases. Similarly to CPET clinical use, its research also increases, with the publication of several scientific contributions from Brazilian researchers in high-impact journals. Therefore, this study aimed at providing a comprehensive review on the applicability of CPET to different clinical situations, in addition to serving as a practical guide for the interpretation of that test. Resumo O teste cardiopulmonar de exercício (TCPE) vem ganhando importância crescente como método de avaliação funcional tanto no Brasil quanto no Mundo. Nas suas aplicações mais frequentes, o teste consiste em submeter o indivíduo a um exercício de intensidade gradativamente crescente até a exaustão ou o

  8. Laser machining of advanced materials

    CERN Document Server

    Dahotre, Narendra B

    2011-01-01

    Advanced materialsIntroductionApplicationsStructural ceramicsBiomaterials CompositesIntermetallicsMachining of advanced materials IntroductionFabrication techniquesMechanical machiningChemical Machining (CM)Electrical machiningRadiation machining Hybrid machiningLaser machiningIntroductionAbsorption of laser energy and multiple reflectionsThermal effectsLaser machining of structural ceramicsIntrodu

  9. Neuroprotective role of Batroxobin in cardiopulmonary resuscitation rabbits

    Institute of Scientific and Technical Information of China (English)

    Zhoujun Kang; Hui Cao; Bing Mei

    2007-01-01

    BACKGROUND: Batroxobin has been found to have protective effect on cerebral ischemia-reperfusion,and cardiopulmonary resuscitation (CPR) is the common cause of global brain ischemia-reperfusion.OBJECTIVE: To observe the effect of Batroxobin on the morphological results of cerebral cortex and hippocampus in rabbit models of CPR, and the changes of serum concentration of tumor necrosis factor alpha (TNF- α) after CPR.DESIGN: A randomized controlled observation.SETTING: Laboratory of the Department of Burns, Changhai Hospital affiliated to the Second Military Medical University of Chinese PLA.MATERIALS: Thirty healthy New Zealand rabbits of 2.5 - 3.0 kg, either male or female, were used. Kits for TNF- α determination were provided by LIFEKEY BioMeditech Company (USA).METHODS: The experiments were carried out in the laboratory of Department of Burns, Changhai Hospital from February 2001 to January 2002. The 32 rabbits were randomly divided into sham-operated group (n=8),conventional resuscitation group (n=12) and Batroxobin-treated group (n=12). The animals in the conventional resuscitation group and Batroxobin-treated group were anesthetized, then induced into modified Pittsburg's model of mechanical ventricular fibrillation. Sham-operated group was discharged on the chest wall, which did not cause ventricular fibrillation. Conventional resuscitation group and Batroxobin-treated group were exposed to 6 minutes of cardiac arrest induced by ventricular fibrillation, then the resuscitation began. A dosage of 0.3 Bu/kg of Batroxobin was administered to the rabbits in the Batroxobin-treated group at the beginning of resuscitation. Blood sample was collected at 4 and 12 hours after CPR to determine the concentration of TNF- α in serum. After the second blood collection, brain tissue was taken out immediately,and the forms of nerve cells in cerebral cortex and hippocampal CA1 region were observed under light microscope.MAIN OUTCOME MEASURES: ① TNF-α concentration in

  10. Chip breaking system for automated machine tool

    Science.gov (United States)

    Arehart, Theodore A.; Carey, Donald O.

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  11. Attaching Chuck Keys to Machine Tools

    Science.gov (United States)

    Richardson, V.

    1984-01-01

    Chuck keys attached to portable machine tools by retracting lanyards. Lanyard held taut by recoil caddy attached to tool base. Chuck key available for use when needed and safely secured during operation of tool.

  12. Macroscopic transport by synthetic molecular machines

    NARCIS (Netherlands)

    Berna, J; Leigh, DA; Lubomska, M; Mendoza, SM; Perez, EM; Rudolf, P; Teobaldi, G; Zerbetto, F

    2005-01-01

    Nature uses molecular motors and machines in virtually every significant biological process, but demonstrating that simpler artificial structures operating through the same gross mechanisms can be interfaced with - and perform physical tasks in - the macroscopic world represents a significant hurdle

  13. [Analysis of postoperative complications in 256 non-small cell lung cancer patients and the value of cardiopulmonary risk index (CPRI)].

    Science.gov (United States)

    Su, Yanjun; Wang, Changli

    2005-10-20

    Pulmonectomy is the first priority in treatment of non-small cell lung cancer (NSCLC). The postoperative complication is the main factor which affects the efficacy of operation. The aim of this study is to analyze the incidences of postoperative complications in NSCLC patients and the value of modified cardiopulmonary risk index (CPRI) in predicting the short-term complication. Postoperative complications were analyzed in patients who underwent pulmonectomy in Tianjin Cancer Institute and Hospital from January 2004 to November 2004, and the value of modified Epstein CPRI in predicting the risk of pulmonectomy was estimated. A total of 256 consecutive patients were studied. Postoperative cardiopulmonary complications occurred in 86 patients (33.6%), hemathorax in 6 patients (2.3%) and other complications in 11 patients (4.3%). Postoperative cardiopulmonary complications occurred in 61 of the 67 patients with CPRI≥4, which was significantly more frequent than that in those with CPRI CPRI≥4 as a threshold for predicting postoperative complication, the sensitivity, specificity and accu- racy were 70.9%, 96.5% and 87.9% respectively. The main early postoperative complications are cardiopulmonary complications. CPRI shows significant importance in predicting the early postoperative prognosis for patients with NSCLC.

  14. VIRTUAL MACHINES IN EDUCATION – CNC MILLING MACHINE WITH SINUMERIK 840D CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    Ireneusz Zagórski

    2014-11-01

    Full Text Available Machining process nowadays could not be conducted without its inseparable element: cutting edge and frequently numerically controlled milling machines. Milling and lathe machining centres comprise standard equipment in many companies of the machinery industry, e.g. automotive or aircraft. It is for that reason that tertiary education should account for this rising demand. This entails the introduction into the curricula the forms which enable visualisation of machining, milling process and virtual production as well as virtual machining centres simulation. Siemens Virtual Machine (Virtual Workshop sets an example of such software, whose high functionality offers a range of learning experience, such as: learning the design of machine tools, their configuration, basic operation functions as well as basics of CNC.

  15. Occupational exposure to sevoflurane during cardiopulmonary bypass

    NARCIS (Netherlands)

    M.J. Blokker-Veldhuis; P.M.M.J. Rutten; S.G. de Hert

    2011-01-01

    Volatile anaesthetic agents are widely used for maintenance of anaesthesia in all kinds of surgical procedures. Despite the implementation of measures such as adequate ventilation of the operating room and the use of efficient scavenging systems, concern remains about the risks for occupational expo

  16. [Virtual educational proposal in cardiopulmonary resuscitation for the neonate care].

    Science.gov (United States)

    Gonçalves, Gilciane Ribeiro; Peres, Heloisa Helena Ciqueto; Rodrigues, Rita de Cássia; Tronchin, Daisy Maria Rizatto; Pereira, Irene Mari

    2010-06-01

    The purpose of this study was to develop an educational proposal using virtual multimedia resources, to innovate, stimulate and diversify areas of communication and interaction, facilitating nurses' autonomous and reflexive process of teaching and learning. This is an applied research, following the cyclical and interactive phases of designing, planning, developing and implementing. The educational proposal was developed on the TelEduc platform, using specific tools for content organization and communication between students and administrator. The teaching modules were on the following themes: Module 1--Fundamentals of the heart anatomy and physiology in newborns; Module 2--Risk factors for the occurrence of cardiorespiratory arrest in newborns; Module 3--Planning nursing care; Module 4--Medications used in cardiopulmonary arrests in newborns; and Module 5--Cardiorespiratory arrest care in newborns. This study may contribute to innovating teaching in nursing from a virtual educational proposal on the important issue of newborn cardiopulmonary resuscitation care.

  17. Dobutamine for inotropic support during emergence from cardiopulmonary bypass.

    Science.gov (United States)

    Tinker, J H; Tarhan, S; White, R D; Pluth, J R; Barnhorst, D A

    1976-04-01

    Dobutamine, a recently introduced derivative of dopamine, is reported to retain inotropic properties with less pronounced chronotropic and arrhythmogenic effects than isoproterenol. The drug was evaluated in two doses, 5 mug/kg/min and 10 mug/kg/min, in two groups of ten patients each, during emergence from cardiopulmonary bypass. A third group of five patients was studied similarly with isoproterenol, 0.02 mug/kg/min. Cardiac index increased 16 and 28 per cent eith the two doses of dobutamine, respectively, and 9 per cent with isoproterenol. Heart rate, in contrast, increased 6 and 15 per cent with dobutamine (not significant) and 44 per cent with isoproterenol (significant). Dobutamine seemed to associated with fewer arrhythmias than isoproterenol. It is concluded that dobutamine, 5-10 mug/kg/min, is suitable for use during emergence from cardiopulmonary bypass and may possess advantages over isoproterenol.

  18. Role of cardiopulmonary mechanoreceptors in the postural regulation of renin

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.A.; Marco, E.J.; Oliveri, C.; Otero, F.J.; Degrossi, O.; Moledo, L.I.; Julius, S.

    1987-04-01

    To change the stretch on cardiopulmonary mechanoreceptors, large shifts of blood in the capacity space were elicited by tilting and by exerting positive lower body pressure in the tilted position. Twelve volunteers underwent invasive hemodynamic studies and in 10 other subjects cardiac size was determined by radionuclide cardiography. In all 22 subjects tilting caused the expected increase of renin, which was abolished by lower body compression. Decompression caused renin to increase again. Right atrial pressure in invasive studies and end-systolic and end-diastolic counts in noninvasive studies showed a significant and strong negative correlation with renin and norepinephrine levels. Thus, the degree of stretch of the cardiopulmonary mechanoreceptors is a major determinant of reflex regulation of renin release in humans.

  19. Methods and systems for micro machines

    Science.gov (United States)

    Stalford, Harold L.

    2017-04-11

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  20. Method of fabricating a micro machine

    Science.gov (United States)

    Stalford, Harold L

    2014-11-11

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  1. Clinical Practice Guidelines for Cardiopulmonary and Cerebral Resuscitation.

    Directory of Open Access Journals (Sweden)

    Victor Rene Navarro Machado

    2009-03-01

    Full Text Available Clinical Practice Guidelines for Cardiopulmonary and Cerebral Resuscitation. It is the group of procedures that should be accomplished to restore circulation and ventilation in a patient with cardiac arrest, including actions to reintegrate upper neurological functions after restoring cardiac function. This document includes a review of concepts, aetiology and updates the main clinical aspects related with diagnosis and treatment aimed at the post-resuscitation syndrome. It includes assessment guidelines focused on the most important aspects to be accomplished.

  2. Estimation of cerebral blood flow during cardiopulmonary resuscitation in humans

    DEFF Research Database (Denmark)

    Christensen, S F; Stadeager, Carsten Preben; Siemkowicz, E

    1990-01-01

    /kg/min). The cortical CBF was found between 14 and 211 ml 100 g-1.min-1 with mean 42 ml 100 g-1.min-1 and mean white matter CBF equal to 27 ml 100 g-1.min-1. It is suggested that the external cardiac massage in humans may be of poor efficacy in terms of brain revival. Cortical CBF after long-lasting cardiopulmonary...

  3. Family presence during cardiopulmonary resuscitation and invasive procedures in children

    OpenAIRE

    Ferreira, Cristiana Araujo G.; Flavia Simphronio Balbino; Balieiro,Maria Magda F. G.; Myriam Aparecida Mandetta

    2014-01-01

    Objective:To identify literature evidences related to actions to promote family's presence during cardiopulmonary resuscitation and invasive procedures in children hospitalized in pediatric and neonatal critical care units.Data sources : Integrative literature review in PubMed, SciELO and Lilacs databases, from 2002 to 2012, with the following inclusion criteria: research article in Medicine, or Nursing, published in Portuguese, English or Spanish, using the keywords family, invasive procedur...

  4. Hormonal and metabolic responses of fetal lamb during cardiopulmonary bypass

    Institute of Scientific and Technical Information of China (English)

    苏肇伉; 周成斌; 张海波; 祝忠群

    2003-01-01

    Objective To study the hormonal and metabolic responses of fetal lamb during cardiopulmonary bypass.Methods Six pregnant ewes underwent fetal cardiopulmonary bypasses with artificial oxygenators and roller pumps for 30 minutes, which maintained the blood gas value at the fetal physiological level. The fetal blood pressure, heart rate, pH value and blood lactate levels were monitored. The levels of catecholamine, cortisol and insulin were measured pre-bypass and then again 30 minutes later. The blood glucose and free fatty acid levels were monitored continuously during the bypass. Fetal hepatic PAS staining was also carried out.Results There were no changes before and during the bypass in fetal blood pressure, heart rate and blood gas. However, pH values decreased and blood lactate levels increased (P<0.05). The fetal catecholamine and cortisol levels increased significantly (P<0.01), while the levels of insulin did not change. The blood glucose and free fatty acid levels increased at the beginning of the bypass (P<0.01), and then gradually slowed down during the bypass. The fetal hepatic PAS staining showed that hepatic glycogen was consumed in large amounts. After 30 minutes of bypass, the fetal lamb would not survive more than 1 hour.Conclusion The fetal lamb has a strong negative reaction to cardiopulmonary bypass.

  5. Cardiopulmonary resuscitation and contrast media reactions in a radiology department

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, John M.; McBride, Kieran D

    2001-04-01

    AIM: To assess current knowledge and training in the management of contrast media reactions and cardiopulmonary resuscitation within a radiology department. MATERIALS AND METHODS: The standard of knowledge about the management of contrast media reactions and cardiopulmonary resuscitation among radiologists, radiographers and nurses were audited using a two-section questionnaire. Our results were compared against nationally accepted standards. Repeat audits were undertaken over a 28-month period. Three full audit cycles were completed. RESULTS: The initial audit confirmed that although a voluntary training programme was in place, knowledge of cardiopulmonary resuscitation techniques were below acceptable levels (set at 70%) for all staff members. The mean score for radiologists was 50%. Immediate changes instituted included retraining courses, the distribution of standard guidelines and the composition and distribution of two separate information handouts. Initial improvements were complemented by new wallcharts, which were distributed throughout the department, a series of lectures on management of contrast reactions and regular reviews with feedback to staff. In the third and final audit all staff groups had surpassed the required standard. CONCLUSION: Knowledge of contrast media reactions and resuscitation needs constant updating. Revision of skills requires a prescriptive programme; visual display of advice is a constant reminder. It is our contention all radiology departmental staff should consider it a personal duty to maintain their resuscitation skills at appropriate standards. O'Neill, J.M., McBride, K.D.(2001). Clinical Radiology 00, 000-000.

  6. Predictive values for cardiopulmonary exercise testing in sedentary Chinese adults.

    Science.gov (United States)

    Ong, Kian Chung; Loo, Chian Min; Ong, Yong Yau; Chan, Siew Pang; Earnest, Arul; Saw, Seang Mei

    2002-09-01

    Normative data for cardiopulmonary exercise testing (CPET) may vary among subjects of different races. The objectives of the present study were to: (i) establish normal standards for cardiopulmonary responses during incremental cycle ergometer testing in order to derive predictive equations for clinically useful variables during CPET of Chinese subjects; and (ii) determine the validity of existing prediction equations of maximal exercise performance for use in our local Chinese population. The maximal and submaximal cardiopulmonary responses were analysed for 95 healthy sedentary adult Chinese subjects (48 men and 47 women; aged 20-70 years) who underwent CPET using a cycle ergometer and an incremental work-rate protocol until symptom limitation. Measurements, at maximal exercise, of oxygen uptake (VO2(max)), power output and heart rate were regressed on age, height, weight and gender. The predictive equations for these exercise parameters performed better than those published previously in out-sample predictive accuracy. Comparison with previous studies also showed that prediction equations of VO2(max) derived from studies based predominantly or exclusively on Caucasian populations overestimated the actual values for our subjects. Previously established prediction equations for maximal exercise performance during CPET based on non-Chinese populations may not be applicable to Chinese subjects in our population.

  7. Cardiopulmonary Exercise Capacity and Preoperative Markers of Inflammation

    Directory of Open Access Journals (Sweden)

    Pervez Sultan

    2014-01-01

    Full Text Available Explanatory mechanisms for the association between poor exercise capacity and infections following surgery are underexplored. We hypothesized that aerobic fitness—assessed by cardiopulmonary exercise testing (CPET—would be associated with circulating inflammatory markers, as quantified by the neutrophil-lymphocyte ratio (NLR and monocyte subsets. The association between cardiopulmonary reserve and inflammation was tested by multivariable regression analysis with covariates including anaerobic threshold (AT and malignancy. In a first cohort of 240 colorectal patients, AT was identified as the sole factor associated with higher NLR (P=0.03 and absolute and relative lymphopenia (P=0.01. Preoperative leukocyte subsets and monocyte CD14+ expression (downregulated by endotoxin and indicative of chronic inflammation were also assessed in two further cohorts of age-matched elective gastrointestinal and orthopaedic surgical patients. Monocyte CD14+ expression was lower in gastrointestinal patients (n=43 compared to age-matched orthopaedic patients (n=31. The circulating CD14+CD16− monocyte subset was reduced in patients with low cardiopulmonary reserve. Poor exercise capacity in patients without a diagnosis of heart failure is independently associated with markers of inflammation. These observations suggest that preoperative inflammation associated with impaired cardiorespiratory performance may contribute to the pathophysiology of postoperative outcome.

  8. Applications and modelling of bulk HTSs in brushless ac machines

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, G.J. [Department of Engineering Science, University of Oxford, Parks Road, Oxford OX1 3PJ (United Kingdom). E-mail: gary.barnes at eng.ox.ac.uk; McCulloch, M.D.; Dew-Hughes, D. [Department of Engineering Science, University of Oxford, Parks Road, Oxford OX1 3PJ (United Kingdom)

    2000-06-01

    The use of high temperature superconducting material in its bulk form for engineering applications is attractive due to the large power densities that can be achieved. In brushless electrical machines, there are essentially four properties that can be exploited; their hysteretic nature, their flux shielding properties, their ability to trap large flux densities and their ability to produce levitation. These properties translate to hysteresis machines, reluctance machines, trapped-field synchronous machines and linear motors respectively. Each one of these machines is addressed separately and computer simulations that reveal the current and field distributions within the machines are used to explain their operation. (author)

  9. Applications and modelling of bulk HTSs in brushless ac machines

    Science.gov (United States)

    Barnes, G. J.; McCulloch, M. D.; Dew-Hughes, D.

    2000-06-01

    The use of high temperature superconducting material in its bulk form for engineering applications is attractive due to the large power densities that can be achieved. In brushless electrical machines, there are essentially four properties that can be exploited; their hysteretic nature, their flux shielding properties, their ability to trap large flux densities and their ability to produce levitation. These properties translate to hysteresis machines, reluctance machines, trapped-field synchronous machines and linear motors respectively. Each one of these machines is addressed separately and computer simulations that reveal the current and field distributions within the machines are used to explain their operation.

  10. Superior Cardiac Function Via Anaplerotic Pyruvate in the Immature Swine Heart After Cardiopulmonary Bypass and Reperfusion

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Aaron; Hyyti, Outi M.; Cohen, Gordon A.; Ning, Xue-Han; Sadilek, Martin; Isern, Nancy G.; Portman, Michael A.

    2008-12-01

    Pyruvate produces inotropic responses in the adult reperfused heart. Pyruvate oxidation and anaplerotic entry into the citric acid cycle (CAC) via carboxylation are linked to stimulation of contractile function. The goals of this study were to determine if these metabolic pathways operate and are maintained in the developing myocardium after reperfusion. Immature male swine (age 10-18 days) were subjected to cardiopulmonary bypass (CPB). Intracoronary infusion of [2]-13C-pyruvate (to achieve a final concentration of 8 mM) was given for 35 minutes starting either during weaning (Group I), after discontinuation (Group II) or without (Control) CPB. Hemodynamic data was collected. 13C NMR spectroscopy was used to determine the fraction of pyruvate entering the CAC via pyruvate carboxylation (PC) to total CAC entry (PC plus decarboxlyation via pyruvate dehydrogenase). Liquid chromatography-mass spectrometry was used to determine total glutamate enrichment.

  11. Alpha Channeling in Mirror Machines

    Energy Technology Data Exchange (ETDEWEB)

    Fisch N.J.

    2005-10-19

    Because of their engineering simplicity, high-β, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

  12. 3 ZBF-7型中耕变量追肥机田间作业效益分析%Economic Analysis of Field Operation of 3 ZBF-7 Type of Row Variable Fertilizer Machine

    Institute of Scientific and Technical Information of China (English)

    潘世强; 金亮; 赵亚祥; 曲桂宝; 田耘

    2015-01-01

    Combining the technology of intertillage, this paper introduces the 3ZBF-7 type of cultivator to settle the re-source waste phenomenon and environmental pollution problems caused by improper use of fertilizers during the process of maize production.The operation of weeding, scarification, variable fertilizer and ridging can be done one-time by the machine.The experiment has been conducted in demonstration areas and the amount of topdressing, the final production and the amount of increase revenue and reduce expenditure has been statistical analyzed.It is concluded that row variable fertilizer machine can achieve the effect of saving fertilizer and improve the economic benefit and ecological benefit To a certain extent.%针对玉米种植过程中因化肥的不当使用造成的资源浪费和环境污染问题,结合中耕施肥技术,研制了一种可一次性完成除草、松土、变量追肥和培土起垄3 ZBF-7型中耕机,并在示范区进行了试验。通过对其追肥用量、玉米产量等进行综合分析,得出使用中耕变量追肥机能够实现节肥的功效,并在一定程度上提高了经济效益和生态效益。

  13. Modern recommendations on children’s baseline cardiopulmonary resuscitation (BLS 2010

    Directory of Open Access Journals (Sweden)

    R.F. Tepaev

    2012-01-01

    Full Text Available The main reason for children’s and adolescents’ mortality in Russia is external causes, such as injuries, poisonings, drownings and road traffic collisions. Many of the external causes may be prevented. Besides, the popularization of modern baseline cardiopulmonary resuscitation methods is one the methods of mortality reduction in children on the pre-hospital stage. The article gives children’s baseline cardiopulmonary resuscitation basics recommended by the American Heart Association.Key words: cardiopulmonary resuscitation, children, adolescents.

  14. Interhospital Transport of Children Undergoing Cardiopulmonary Resuscitation: A Practical and Ethical Dilemma.

    Science.gov (United States)

    Noje, Corina; Fishe, Jennifer N; Costabile, Philomena M; Klein, Bruce L; Hunt, Elizabeth A; Pronovost, Peter J

    2017-10-01

    To discuss risks and benefits of interhospital transport of children in cardiac arrest undergoing cardiopulmonary resuscitation. Narrative review. Not applicable. Transporting children in cardiac arrest with ongoing cardiopulmonary resuscitation between hospitals is potentially lifesaving if it enables access to resources such as extracorporeal support, but may risk transport personnel safety. Research is needed to optimize outcomes of patients transported with ongoing cardiopulmonary resuscitation and reduce risks to the staff caring for them.

  15. Management of Anesthesia under Extracorporeal Cardiopulmonary Support in an Infant with Severe Subglottic Stenosis.

    Science.gov (United States)

    Soeda, Rie; Taniguchi, Fumika; Sawada, Maiko; Hamaoka, Saeko; Shibasaki, Masayuki; Nakajima, Yasufumi; Hashimoto, Satoru; Sawa, Teiji; Nakayama, Yoshinobu

    2016-01-01

    A 4-month-old female infant who weighed 3.57 kg with severe subglottic stenosis underwent tracheostomy under extracorporeal cardiopulmonary support. First, we set up extracorporeal cardiopulmonary support to the infant and then successfully intubated an endotracheal tube with a 2.5 mm inner diameter before tracheostomy by otolaryngologists. Extracorporeal cardiopulmonary support is an alternative for maintenance of oxygenation in difficult airway management in infants.

  16. Management of Anesthesia under Extracorporeal Cardiopulmonary Support in an Infant with Severe Subglottic Stenosis

    Directory of Open Access Journals (Sweden)

    Rie Soeda

    2016-01-01

    Full Text Available A 4-month-old female infant who weighed 3.57 kg with severe subglottic stenosis underwent tracheostomy under extracorporeal cardiopulmonary support. First, we set up extracorporeal cardiopulmonary support to the infant and then successfully intubated an endotracheal tube with a 2.5 mm inner diameter before tracheostomy by otolaryngologists. Extracorporeal cardiopulmonary support is an alternative for maintenance of oxygenation in difficult airway management in infants.

  17. Novel blood sampling method of an artificial endocrine pancreas via the cardiopulmonary bypass circuit.

    Science.gov (United States)

    Kawahito, Shinji; Higuchi, Seiichi; Mita, Naoji; Kitagawa, Tetsuya; Kitahata, Hiroshi

    2013-12-01

    We tried to perform continuous blood glucose monitoring during cardiovascular surgery involving cardiopulmonary bypass using an artificial endocrine pancreas (STG-22 or -55; Nikkiso, Tokyo, Japan); however, we often encountered problems during these procedures because insufficient blood was obtained for monitoring. Thus, we started performing the blood sampling via the venous side of the cardiopulmonary bypass circuit. As a result, continuous blood glucose monitoring using an artificial endocrine pancreas was proven to be stable and reliable during cardiovascular surgery involving cardiopulmonary bypass.

  18. The effect of the variable frequency drive of the CNC roll grinding machine on the operation of other devices in low-voltage electrical installation

    Directory of Open Access Journals (Sweden)

    Simić Ninoslav

    2016-01-01

    Full Text Available This paper presents one of the observations that have been collected during the years of testing of electrical installations. A typical case from industrial plant in which are installed loads with variable frequency regulation is analyzed. We propose a simple way by measuring the frequency of the voltage in the objects, to establish the existence of possible irregularities in the operation of the individual units and analyze the influence of the current and voltage signal shape of one load to the work of other loads in the plant. The need for verification of electrical installations immediately upon receipt and installation of electrical equipment is emphasized and the use of the latest standards in the design and selection of equipment, in order to avoid unplanned expenses is recommended.

  19. Template-Directed Biopolymerization: Tape-Copying Turing Machines

    Science.gov (United States)

    Sharma, Ajeet K.; Chowdhury, Debashish

    2012-10-01

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw the attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  20. Template-directed biopolymerization: tape-copying Turing machines

    CERN Document Server

    Sharma, Ajeet K; 10.1142/S1793048012300083

    2013-01-01

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  1. Development and experiment of combined operation machine for cotton straw chopping and plastic film collecting%棉秆粉碎还田与残膜回收联合作业机研制与试验

    Institute of Scientific and Technical Information of China (English)

    胡凯; 王吉奎; 李斌; 蒋蓓; 丁双双; 李天文

    2013-01-01

    According to the problems of plastic film without distinction as straw, the plastic film recovery rate is low, the effect is poor in removing the collected film, and plastic films are easy to wind in cotton straw chopping and a plastic film collecting combined machine in Xinjiang province, the 4JM-1500 straw chopping and plastic film collecting machine has been designed. It consists of a traction device, straw chopping device, straw conveying device, floating gear-rake institution and chain rake device, film removing device, driven system, plastic film box, and rack and wheel, etc. It can realize straw chopper returning, the straw separation with plastic film, and the plastic film recycling with one operation. This machine combining the hammer device of cotton straw chopping and scraper conveyor device, the machine could separate cotton straws and plastic film, and collect the plastic film by the floating gear-rake institution and chain rake device. It also has a good effect for ground profile modeling and improving the plastic film recovery ratio. It can remove the collected film though the air force device in the operating process, which can prevent the plastic film winding with the film stripping device and affect the work. The structure and working principle of the machine, and the parameters of working parts, and main structures were determined through the main components designed. Knife shaft speed n 3=1800~2200 r/min, straw conveying speed n1=120~150 r/min, plastic film conveying chains speed n2=60~90 r/min, film removing wind speed v 1=6.2~10.5 m/s and the working width was 1500 mm. It effectively decreased the labor cost and enhanced the plastic film collecting efficiency. Field trials demonstrated that the separation ratio of cotton straws and plastic film was 97%, the plastic film collecting ratio was 88.6%, and the film removing ratio was 89.4%under the conditions of machine operating speed of 5-5.5 km/h and straw conveying speed of 1.8m/s, which could

  2. Impact of cerebral cardiopulmonary resuscitation maneuvers in a general hospital: prognostic factors and outcomes

    Directory of Open Access Journals (Sweden)

    Bartholomay Eduardo

    2003-01-01

    Full Text Available OBJECTIVE: To assess survival of patients undergoing cerebral cardiopulmonary resuscitation maneuvers and to identify prognostic factors for short-term survival. METHODS: Prospective study with patients undergoing cardiopulmonary resuscitation maneuvers. RESULTS: The study included 150 patients. Spontaneous circulation was re-established in 88 (58% patients, and 42 (28% were discharged from the hospital. The necessary number of patients treated to save 1 life in 12 months was 3.4. The presence of ventricular fibrillation or tachycardia (VF/VT as the initial rhythm, shorter times of cardiopulmonary resuscitation maneuvers and cardiopulmonary arrest, and greater values of mean blood pressure (BP prior to cardiopulmonary arrest were independent variables for re-establishment of spontaneous circulation and hospital discharge. The odds ratios for hospital discharge were as follows: 6.1 (95% confidence interval [CI] = 2.7-13.6, when the initial rhythm was VF/VT; 9.4 (95% CI = 4.1-21.3, when the time of cerebral cardiopulmonary resuscitation was 70 mmHg. CONCLUSION: The presence of VF/VT as the initial rhythm, shorter times of cerebral cardiopulmonary resuscitation and of cardiopulmonary arrest, and a greater value of BP prior to cardiopulmonary arrest were independent variables of better prognosis.

  3. Efficiency of Molecular Machines with Continuous Phase Space

    DEFF Research Database (Denmark)

    Golubeva, Natalia

    We consider a molecular machine described as a Brownian particle diffusing in a tilted periodic potential. We evaluate the absorbed and released power of the machine as a function of the applied molecular and chemical forces, by using the fact that the times for completing a cycle in the forward...... for a broad class of 2-D models of a Brownian machine and find that loosely coupled machines operate with a smaller efficiency at maximum power than their strongly coupled counterparts....

  4. Adaptation trajectory in five axes machine to manufacture orthopedic prostheses

    Science.gov (United States)

    Azzam, Noureddine; Boukebbab, Salim; Chaves-Jacob, Julien; Linares, Jean-Marc

    2014-10-01

    A new method of generation and adaptation of multi-axis machines ultrasonic machining paths, geometric change in gross machining is proposed in this paper. Currently, these are in most machining time are done manually by highly trained operators. The proposed method starts with a first step of association using an Iterative Closest Point "ICP" algorithm. In the second step, a deforming toolpath is given. To validate the theoretical developments, experimental tests were carried out for a uni-compartmental femoral knee component.

  5. USSR Report, Machine Tools and Metalworking Equipment, No. 6

    Science.gov (United States)

    2007-11-02

    operators, forsee shortages of equipment for individual machine groups, or take into account wastage due to nonideal manufacturing condipions. Let us...manufacture, chemical and petroleum machine building, and machine building for light industry, the food industry, and household appliance manufacture...Building for Light and Food Industry and Household Appliances for a group of tool shops at machine-building plants in Kiev, Vinnintsa, and Poltava

  6. Investigation for the Flashover Phenomenon in DC Machines

    Science.gov (United States)

    Nakanishi, Yuji; Sugimoto, Kensho; Morita, Noboru

    Although in recent years, large DC machines have gradually been replaced with variable-speed AC machines, many large DC machines are still operating in steel mills. Flashover is still a frequent occurrence and has been ongoing issues since DC machines were first brought into use. In this investigation, flashover experiments were performed using model tests. The sustained voltage of the DC arc was cleared and copper dragging was found to be related to flashover.

  7. Interaction with Machine Improvisation

    Science.gov (United States)

    Assayag, Gerard; Bloch, George; Cont, Arshia; Dubnov, Shlomo

    We describe two multi-agent architectures for an improvisation oriented musician-machine interaction systems that learn in real time from human performers. The improvisation kernel is based on sequence modeling and statistical learning. We present two frameworks of interaction with this kernel. In the first, the stylistic interaction is guided by a human operator in front of an interactive computer environment. In the second framework, the stylistic interaction is delegated to machine intelligence and therefore, knowledge propagation and decision are taken care of by the computer alone. The first framework involves a hybrid architecture using two popular composition/performance environments, Max and OpenMusic, that are put to work and communicate together, each one handling the process at a different time/memory scale. The second framework shares the same representational schemes with the first but uses an Active Learning architecture based on collaborative, competitive and memory-based learning to handle stylistic interactions. Both systems are capable of processing real-time audio/video as well as MIDI. After discussing the general cognitive background of improvisation practices, the statistical modelling tools and the concurrent agent architecture are presented. Then, an Active Learning scheme is described and considered in terms of using different improvisation regimes for improvisation planning. Finally, we provide more details about the different system implementations and describe several performances with the system.

  8. Dynamic Analysis of Foundation Supporting Rotary Machine

    Directory of Open Access Journals (Sweden)

    Utkarsh S. Patel

    2015-08-01

    Full Text Available With the advancement of technology in the field of industry, high speed machinery has been developed. As the speed of machinery has increased, vibrations also increased. Machines transmit vibrations to the structure supporting them. Hence, it is important to design and develop such structure which sustains the vibrations of machinery. Hence, in this study it has been aimed to execute the study on foundations supporting rotary type of machine like blower. In this paper, the most important parameters like frequency and amplitude are considered while execution of analysis of machine foundation supporting blower type machine. This paper shows, better interface between foundation designer and machine manufacturer for better performance of machine. The design aids/approaches for foundation design is also described in this paper and an attempt has been made to study the dynamic behaviour of a foundation structure for blower type machine subjected to forces due to operation of blower machine. Two different types of foundations for Rotary type Machine that is Blower have been studied in this paper

  9. Managing virtual machines with Vac and Vcycle

    Science.gov (United States)

    McNab, A.; Love, P.; MacMahon, E.

    2015-12-01

    We compare the Vac and Vcycle virtual machine lifecycle managers and our experiences in providing production job execution services for ATLAS, CMS, LHCb, and the GridPP VO at sites in the UK, France and at CERN. In both the Vac and Vcycle systems, the virtual machines are created outside of the experiment's job submission and pilot framework. In the case of Vac, a daemon runs on each physical host which manages a pool of virtual machines on that host, and a peer-to-peer UDP protocol is used to achieve the desired target shares between experiments across the site. In the case of Vcycle, a daemon manages a pool of virtual machines on an Infrastructure-as-a-Service cloud system such as OpenStack, and has within itself enough information to create the types of virtual machines to achieve the desired target shares. Both systems allow unused shares for one experiment to temporarily taken up by other experiements with work to be done. The virtual machine lifecycle is managed with a minimum of information, gathered from the virtual machine creation mechanism (such as libvirt or OpenStack) and using the proposed Machine/Job Features API from WLCG. We demonstrate that the same virtual machine designs can be used to run production jobs on Vac and Vcycle/OpenStack sites for ATLAS, CMS, LHCb, and GridPP, and that these technologies allow sites to be operated in a reliable and robust way.

  10. Setup reduction approaches for machining

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  11. Machine tool structures

    CERN Document Server

    Koenigsberger, F

    1970-01-01

    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

  12. Training Restricted Boltzmann Machines

    DEFF Research Database (Denmark)

    Fischer, Asja

    Restricted Boltzmann machines (RBMs) are probabilistic graphical models that can also be interpreted as stochastic neural networks. Training RBMs is known to be challenging. Computing the likelihood of the model parameters or its gradient is in general computationally intensive. Thus, training...... relies on sampling based approximations of the log-likelihood gradient. I will present an empirical and theoretical analysis of the bias of these approximations and show that the approximation error can lead to a distortion of the learning process. The bias decreases with increasing mixing rate...... of the applied sampling procedure and I will introduce a transition operator that leads to faster mixing. Finally, a different parametrisation of RBMs will be discussed that leads to better learning results and more robustness against changes in the data representation....

  13. Mechanics of Wood Machining

    CERN Document Server

    Csanády, Etele

    2013-01-01

    Wood is one of the most valuable materials for mankind, and since our earliest days wood materials have been widely used. Today we have modern woodworking machine and tools; however, the raw wood materials available are continuously declining. Therefore we are forced to use this precious material more economically, reducing waste wherever possible. This new textbook on the “Mechanics of Wood Machining” combines the quantitative, mathematical analysis of the mechanisms of wood processing with practical recommendations and solutions. Bringing together materials from many sources, the book contains new theoretical and experimental approaches and offers a clear and systematic overview of the theory of wood cutting, thermal loading in wood-cutting tools, dynamic behaviour of tool and work piece, optimum choice of operational parameters and energy consumption, the wear process of the tools, and the general regularities of wood surface roughness. Diagrams are provided for the quick estimation of various process ...

  14. Tabu search for the job-shop scheduling problem with multi-purpose machines

    NARCIS (Netherlands)

    Hurink, Johann; Jurisch, Bernd; Thole, Monika

    1994-01-01

    In this paper we study the following generalization of the job-shop scheduling problem. Each operation can be performed by one machine out of a set of machines given for this operation. The processing time does not depend on the machine which has been chosen for processing the operation. This proble

  15. 缝纫女工颈肩部肌肉的表面肌电研究%A field study on the work load and muscle fatigue at neck-shoulder in female sewing machine operators by using surface electromyography

    Institute of Scientific and Technical Information of China (English)

    张非若; 王生; 何丽华; 张颖; 武珊珊; 李静芸; 胡广义; 叶康平

    2011-01-01

    Objective To study neck and shoulder work-related muscle fatigue of female sewing machine operators. Methods 18 health female sewing machine operators without musculoskeletal disorders work in Beijing garment industry factory as volunteers in participate of this study. The maximal voluntary contraction (MVC) and 20% MVC of bilateral upper trapezium and cervical erectors spinae was tested before sewing operations, then the whole 20 time windows (ltime window=10 min) sewing machine operations was monitored and the surface electromyography( sEMG ) signals simultaneously was recorded after monitoring the 20%MVC was tested. Use amplitude analysis method to reduction recorded EMG signals. Results During work,the median load for the left cervical erector spinae (LCES), right cervical erector spinae (RCES), left upper trapezium(LUT) and right upper trapezium(RUT) respectively was 6.78±1.05, 6.94±1.12, 5.68±2.56 and 6.47±3.22, work load of right is higher than the left; static load analysis indicated the value of RMS20%MVC before work was higher than that value after work, the increase of right CES and UT RMS20%MVC was more; the largest 20%MVE of bilateral CES occurred at 20th time window, and that of bilateral UT happened at 16th. Conclusions The work load of female sewing machine operators is sustained "static" load, and work load of right neck-shoulder is higher than left, right neck-shoulder muscle is more fatigable and much serious once fatigued.%目的 研究缝纫女工颈肩部工作负荷和肌肉疲劳情况.方法 使用表面肌电图技术现场测量并记录18名健康的无肌肉骨骼疾患的缝纫机操作女工日常工作期间200 min(每时段10 min,20个时段)双侧颈竖脊肌(CES)和斜方肌上支(UT)的肌电信号.现场测定之前,分别测定被测试者双侧CES和UT的最大随意自主收缩和20%最大随意自主收缩(the maximal voluntary contraction,MVC)时的肌电信号;被测试者工作结束后测量其双侧CES和UT的20

  16. 丙泊酚和七氟醚复合麻醉对体外循环下心脏瓣膜手术老年患者术后认知功能障碍影响的比较%Comparison of effects of propofol-and sevoflurane-based anesthesia on postoperative cognitive dysfunction in elderly patients undergoing cardiac valve operation under cardiopulmonary bypass

    Institute of Scientific and Technical Information of China (English)

    施乙飞; 韩建阁; 翟文倩; 耳建旭

    2016-01-01

    Objective To compare the effects of propofol-and sevoflurane-based anesthesia on postoperative cognitive dysfunction in elderly patients undergoing cardiac valve operation under cardiopulmonary bypass (CPB).Methods Eighty patients of both sexes,of American Society of Anesthesiologists physical status Ⅱ or Ⅲ,aged 65-72 yr,weighing 60-80 kg,scheduled for elective cardiac valve operation under CPB,were randomly divided into 2 groups (n =40 each) using a random number table:propofol-based anesthesia group (group P) and sevoflurane-based anesthesia group (group S).In group P,propofo] was given by target-controlled infusion with the target plasma concentration of 0.5-2.0 μg/ml to maintain anesthesia.In group S,0.5%-2.5% sevoflurane was inhaled for maintenance of anesthesia.Immediately after induction of anesthesia,at the end of operation,and at 6,12 and 24 h after operation,blood samples were taken from the superior vena cava for determination of plasma matrix metalloproteinase-9,S100β protein and neuron-specific enolase concentrations.Cognitive function was assessed at 1 day before operation,and at 3,7 and 30 days after operation.Results Compared with group P,the plasma matrix metalloproteinase-9,S100β protein and neuron-specific enolase concentrations at the end of operation and at 6 h after operation and incidence of postoperative cognitive dysfunction were significantly increased in group S (P < 0.05).Conclusion Propofol-based anesthesia provides better cerebral protection than sevoflurane-based anesthesia,and the development of postoperative cognitive dysfunction is decreased in elderly patients undergoing cardiac valve operation under CPB.%目的 比较丙泊酚和七氟醚复合麻醉对体外循环下心脏瓣膜手术老年患者术后认知功能障碍的影响.方法 择期体外循环下行心脏瓣膜手术患者80例,性别不限,ASA分级Ⅱ或Ⅲ级,年龄65 ~ 72岁,体重60~ 80 kg.采用随机数字表法分为2组(n=40):丙泊酚复

  17. Design of Demining Machines

    CERN Document Server

    Mikulic, Dinko

    2013-01-01

    In constant effort to eliminate mine danger, international mine action community has been developing safety, efficiency and cost-effectiveness of clearance methods. Demining machines have become necessary when conducting humanitarian demining where the mechanization of demining provides greater safety and productivity. Design of Demining Machines describes the development and testing of modern demining machines in humanitarian demining.   Relevant data for design of demining machines are included to explain the machinery implemented and some innovative and inspiring development solutions. Development technologies, companies and projects are discussed to provide a comprehensive estimate of the effects of various design factors and to proper selection of optimal parameters for designing the demining machines.   Covering the dynamic processes occurring in machine assemblies and their components to a broader understanding of demining machine as a whole, Design of Demining Machines is primarily tailored as a tex...

  18. Applied machining technology

    CERN Document Server

    Tschätsch, Heinz

    2010-01-01

    Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

  19. Machining with abrasives

    CERN Document Server

    Jackson, Mark J

    2011-01-01

    Abrasive machining is key to obtaining the desired geometry and surface quality in manufacturing. This book discusses the fundamentals and advances in the abrasive machining processes. It provides a complete overview of developing areas in the field.

  20. Machine medical ethics

    CERN Document Server

    Pontier, Matthijs

    2015-01-01

    The essays in this book, written by researchers from both humanities and sciences, describe various theoretical and experimental approaches to adding medical ethics to a machine in medical settings. Medical machines are in close proximity with human beings, and getting closer: with patients who are in vulnerable states of health, who have disabilities of various kinds, with the very young or very old, and with medical professionals. In such contexts, machines are undertaking important medical tasks that require emotional sensitivity, knowledge of medical codes, human dignity, and privacy. As machine technology advances, ethical concerns become more urgent: should medical machines be programmed to follow a code of medical ethics? What theory or theories should constrain medical machine conduct? What design features are required? Should machines share responsibility with humans for the ethical consequences of medical actions? How ought clinical relationships involving machines to be modeled? Is a capacity for e...

  1. Brain versus Machine Control.

    Directory of Open Access Journals (Sweden)

    Jose M Carmena

    2004-12-01

    Full Text Available Dr. Octopus, the villain of the movie "Spiderman 2", is a fusion of man and machine. Neuroscientist Jose Carmena examines the facts behind this fictional account of a brain- machine interface

  2. Reliability and Responsiveness of Cardiopulmonary Exercise Testing in Fatigued Persons with Multiple Sclerosis and Low to Mild Disability

    NARCIS (Netherlands)

    Heine, Martin; van den Akker, Lizanne Eva; Verschuren, Olaf; Visser-Meily, Anne; Kwakkel, Gert

    2015-01-01

    Background Peak oxygen uptake (VO(2)peak) via cardiopulmonary exercise testing is considered the gold standard for testing aerobic capacity in healthy participants and people with various medical conditions. The reliability and responsiveness of cardiopulmonary exercise testing outcomes in persons

  3. Sensorless Control of Permanent Magnet Synchronous Machines

    DEFF Research Database (Denmark)

    Matzen, Torben N.

    to appear. Sensorless control implies control of the machine without using a direct measurement of the rotor position. Instead, more information is extracted from the existing controller feedback signals - often the machine currents - and this information is used together with accurate system knowledge...... machine is also used for servo applications where higher dynamics is required, e.g. in industrial automation. The energy efficiency is essential for battery powered electric vehicles where the electric storage capacity is limited by cost, mass and volume. The control system necessary to operate...... the synchronous machine requires knowledge of the rotor shaft position due to the synchronous and undamped nature of the machine. The rotor position may be measured using a mechanical sensor, but the sensor reduces reliability and adds cost to the system and for this reason sensorless control methods started...

  4. A Comparison of Different Machine Transliteration Models

    CERN Document Server

    Choi, K; Oh, J; 10.1613/jair.1999

    2011-01-01

    Machine transliteration is a method for automatically converting words in one language into phonetically equivalent ones in another language. Machine transliteration plays an important role in natural language applications such as information retrieval and machine translation, especially for handling proper nouns and technical terms. Four machine transliteration models -- grapheme-based transliteration model, phoneme-based transliteration model, hybrid transliteration model, and correspondence-based transliteration model -- have been proposed by several researchers. To date, however, there has been little research on a framework in which multiple transliteration models can operate simultaneously. Furthermore, there has been no comparison of the four models within the same framework and using the same data. We addressed these problems by 1) modeling the four models within the same framework, 2) comparing them under the same conditions, and 3) developing a way to improve machine transliteration through this com...

  5. Indications for Cardiopulmonary Bypass During Pregnancy and Impact on Fetal Outcomes

    Science.gov (United States)

    Yuan, S.-M.

    2014-01-01

    Background: Cardiac operations in pregnant patients are a challenge for physicians in multidisciplinary teams due to the complexity of the condition which affects both mother and baby. Management strategies vary on a case-by-case basis. Feto-neonatal and maternal outcomes after cardiopulmonary bypass (CPB) in pregnancy, especially long-term follow-up results, have not been sufficiently described. Methods: This review was based on a complete literature retrieval of articles published between 1991 and April 30, 2013. Results: Indications for CPB during pregnancy were cardiac surgery in 150 (96.8 %) patients, most of which consisted of valve replacements for mitral and/or aortic valve disorders, resuscitation due to amniotic fluid embolism, autotransfusion, and circulatory support during cesarean section to improve patient survival in 5 (3.2 %) patients. During CPB, fetuses showed either a brief heart rate drop with natural recovery after surgery or, in most cases, fetal heart rate remained normal throughout the whole course of CPB. Overall feto-neonatal mortality was 18.6 %. In comparison with pregnant patients whose baby survived, feto-neonatal death occurred after a significantly shorter gestational period at the time of onset of cardiac symptoms, cardiac surgery/resuscitation under CPB in the whole patient setting, or cardiac surgery/resuscitation with CPB prior to delivery. Conclusions: The most common surgical indications for CPB during pregnancy were cardiac surgery, followed by resuscitation for cardiopulmonary collapse. CPB was used most frequently in maternal cardiac surgery/resuscitation in the second trimester. Improved CPB conditions including high flow, high pressure and normothermia or mild hypothermia during pregnancy have benefited maternal and feto-neonatal outcomes. A shorter gestational period and the use of CPB during pregnancy were closely associated with feto-neonatal mortality. It is therefore important to attempt delivery ahead of

  6. Organ donation as an outcome of traumatic cardiopulmonary arrest: A cost evaluation.

    Science.gov (United States)

    Love, Katie M; Brown, Joshua B; Harbrecht, Brian G; Muldoon, Susan B; Miller, Keith R; Benns, Matthew V; Smith, Jason W; Baker, Christopher E; Franklin, Glen A

    2016-05-01

    Survival after traumatic cardiopulmonary arrest (TCPA) is rare and requires significant resource expenditure. Organ donation as an outcome of TCPA resuscitation has not yet been included in a cost analysis. The aims of this study were to identify variables associated with survival and organ donation after TCPA, and to estimate the cost of achieving these outcomes. We hypothesized that the inclusion of organ donation as a potential outcome would make TCPA resuscitation more cost-effective. Adult patients who required resuscitation for TCPA at a level I trauma center were retrospectively reviewed over 36 months. Data were obtained from medical records, hospital accounting records, and the local organ procurement agency. Outcomes included survival to discharge, neurologic function, and organ donor eligibility. An individual-level state-transition cost-effectiveness model was used to evaluate the cost of TCPA resuscitation with and without organ donation included as an outcome. Incremental cost-effectiveness ratio was calculated to determine additional cost per life saved when organ donation is included. Over the study period, 8,932 subjects were evaluated. Traumatic cardiopulmonary arrest occurred in 237 patients (3%). The mortality rate was 97%. Variables associated with survival included emergency department disposition to the operating room (p organ donation with a procurement rate of 2%. Organ donor eligibility was associated with arrest after arrival to the emergency department (p donation was $538,000. The incremental cost-effectiveness ratio was $76,816 per additional life saved including donation as an outcome. The decision to pursue resuscitation should continue to be based on the presence of signs of life, especially pupil reactivity and duration of arrest. If the primary objective is survival, organ procurement will be maximized without conflict of interest. Early fresh frozen plasma transfusion may increase successful organ donation. The financial burden

  7. A Universal Reactive Machine

    DEFF Research Database (Denmark)

    Andersen, Henrik Reif; Mørk, Simon; Sørensen, Morten U.

    1997-01-01

    Turing showed the existence of a model universal for the set of Turing machines in the sense that given an encoding of any Turing machine asinput the universal Turing machine simulates it. We introduce the concept of universality for reactive systems and construct a CCS processuniversal...

  8. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    Energy Technology Data Exchange (ETDEWEB)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  9. COMPARATIVE STUDY ON THE TECHNICAL PERFORMANCES OF TWO THICKNESSING MACHINES

    Directory of Open Access Journals (Sweden)

    Sergiu RĂCĂŞAN

    2015-06-01

    Full Text Available ract: The paper presents a series of experimental researches on two operating parameters – the energy consumption and the generated noise level – for two thicknessing machines of different generations: MRG8 (production year: 1972 and Felder D963 (production year: 2013. The aim was to highlight some of the developments registered over four decades by this type of woodworking machines. The results show that, in similar operating conditions, the new machine consume less energy and produce lower noise level.

  10. Extracorporeal membrane oxygenation support in post-traumatic cardiopulmonary failure

    Science.gov (United States)

    Lin, Chun-Yu; Tsai, Feng-Chun; Lee, Hsiu-An; Tseng, Yuan-His

    2017-01-01

    Abstract Patients with multiple traumas associated with cardiopulmonary failure have a high mortality rate; however, such patients can be temporarily stabilized using extracorporeal membrane oxygenation (ECMO), providing a bridge to rescue therapy. Using a retrospective study design, we aimed to clarify the prognostic factors of post-traumatic ECMO support. From March 2006 to July 2016, 43 adult patients (mean age, 37.3 ± 15.2 years; 7 females [16.3%]) underwent ECMO because of post-traumatic cardiopulmonary failure. Pre-ECMO demographics, peri-ECMO events, and post-ECMO recoveries were compared between survivors and nonsurvivors. The most common traumatic insult was traffic collision (n = 30, 69.8%), and involved injury areas included the chest (n = 33, 76.7%), head (n = 14, 32.6%), abdomen (n = 21, 48.8%), and fractures (n = 21, 48.8%). Fifteen patients (34.9%) underwent cardiopulmonary resuscitation and 22 (51.2%) received rescue interventions before ECMO deployment. The mean time interval between trauma and ECMO was 90.6 ± 130.1 hours, and the mode of support was venovenous in 26 patients (60.5%). A total of 26 patients (60.5%) were weaned off of ECMO and 22 (51.6%) survived to discharge, with an overall mean support time of 162.9 ± 182.7 hours. A multivariate regression analysis identified 2 significant predictors for in-hospital mortality: an injury severity score (ISS) >30 (odds ratio [OR], 9.48; 95% confidence interval [CI], 1.04–18.47; P = 0.042), and the requirement of renal replacement therapy (RRT) during ECMO (OR, 8.64; 95% CI, 1.73–26.09; P = 0.020). These two factors were also significant for the 1-year survival (ISS >30: 12.5%; ISS ≤30, 48.1%, P = 0.001) (RRT required, 15.0%; RRT not required, 52.2%, P = 0.006). Using ECMO in selected traumatized patients with cardiopulmonary failure can be a salvage therapy. Prompt intervention before shock-impaired systemic organ perfusion and acute

  11. Cardiopulmonary support and extracorporeal membrane oxygenation for cardiac assist.

    Science.gov (United States)

    von Segesser, L K

    1999-08-01

    Use of cardiopulmonary bypass for emergency resuscitation is not new. In fact, John Gibbon proposed this concept for the treatment of severe pulmonary embolism in 1937. Significant progress has been made since, and two main concepts for cardiac assist based on cardiopulmonary bypass have emerged: cardiopulmonary support (CPS) and extracorporeal membrane oxygenation (ECMO). The objective of this review is to summarize the state of the art in these two technologies. Configuration of CPS is now fairly standard. A mobile cart with relatively large wheels allowing for easy transportation carries a centrifugal pump, a back-up battery with a charger, an oxygen cylinder, and a small heating system. Percutaneous cannulation, pump-driven venous return, rapid availability, and transportability are the main characteristics of a CPS system. Cardiocirculatory arrest is a major predictor of mortality despite the use of CPS. In contrast, CPS appears to be a powerful tool for patients in cardiogenic shock before cardiocirculatory arrest, requiring some type of therapeutic procedures, especially repair of anatomically correctable problems or bridging to other mechanical circulatory support systems such as ventricular assist devices. CPS is in general not suitable for long-term applications because of the small-bore cannulas, resulting in significant pressure gradients and eventually hemolysis. In contrast, ECMO can be designed for longer-term circulatory support. This requires large-bore cannulas and specifically designed oxygenators. The latter are either plasma leakage resistent (true membranes) or relatively thrombo-resistant (heparin coated). Both technologies require oxygenator changeovers although the main reason for this is different (clotting for the former, plasma leakage for the latter). Likewise, the tubing within a roller pump has to be displaced and centrifugal pump heads have to be replaced over time. ECMO is certainly the first choice for a circulatory support system

  12. Gene expression profile after cardiopulmonary bypass and cardioplegic arrest.

    Science.gov (United States)

    Ruel, Marc; Bianchi, Cesario; Khan, Tanveer A; Xu, Shu; Liddicoat, John R; Voisine, Pierre; Araujo, Eugenio; Lyon, Helen; Kohane, Isaac S; Libermann, Towia A; Sellke, Frank W

    2003-11-01

    This study examines the cardiac and peripheral gene expression responses to cardiopulmonary bypass and cardioplegic arrest. Atrial myocardium and skeletal muscle were harvested from 16 patients who underwent coronary artery bypass grafting before and after cardiopulmonary bypass and cardioplegic arrest. Ten sample pairs were selected for patient similarity, and oligonucleotide microarray analyses of 12,625 genes were performed using matched precardiopulmonary bypass tissues as controls. Array results were validated with Northern blotting, real-time polymerase chain reaction, in situ hybridization, and immunoblotting. Statistical analyses were nonparametric. Median durations of cardiopulmonary bypass and cardioplegic arrest were 74 and 60 minutes, respectively. Compared with precardiopulmonary bypass, postcardiopulmonary bypass myocardial tissues revealed 480 up-regulated and 626 down-regulated genes with a threshold P value of.025 or less (signal-to-noise ratio: 3.46); skeletal muscle tissues showed 560 and 348 such genes, respectively (signal-to-noise ratio: 3.04). Up-regulated genes in cardiac tissues included inflammatory and transcription activators FOS; jun B proto-oncogene; nuclear receptor subfamily 4, group A, member 3; MYC; transcription factor-8; endothelial leukocyte adhesion molecule-1; and cysteine-rich 61; apoptotic genes nuclear receptor subfamily 4, group A, member 1 and cyclin-dependent kinase inhibitor 1A; and stress genes dual-specificity phosphatase-1, dual-specificity phosphatase-5, and B-cell translocation gene 2. Up-regulated skeletal muscle genes included interleukin 6; interleukin 8; tumor necrosis factor receptor superfamily, member 11B; nuclear receptor subfamily 4, group A, member 3; transcription factor-8; interleukin 13; jun B proto-oncogene; interleukin 1B; glycoprotein Ib, platelet, alpha polypeptide; and Ras-associated protein RAB27A. Down-regulated genes included haptoglobin and numerous immunoglobulins in the heart, and factor H

  13. [CPR--guidelines 2000. New international guidelines for cardiopulmonary resuscitation].

    Science.gov (United States)

    Gervais, H W

    2001-03-01

    The "Guidelines 2000 for Cardiopulmonary Resuscitation and Emergency Cardiovascular Care. An International Consensus an Science" are the first true international CPR guidelines in the history of resuscitation medicine. Experts from major international resuscitation organizations (International Liaison Committee on Resuscitation, ILCOR) achieved a consensus of recommendations which had to pass a rigorous review procedure applying the tools of evidence-based medicine: all proposed guidelines or guideline changes had to be based on critically appraised pieces of evidence which had to be integrated into a final class of recommendations. The most important changes compared to previous recommendations from either the European Resuscitation Council or the American Heart Association are presented and commented upon.

  14. Popular Hybrid Congenital Heart Procedures without Cardiopulmonary Bypass

    Science.gov (United States)

    Gupta, Aamisha; Amin, Zahid

    2017-01-01

    As surgical and catheter interventions advance, patients with congenital heart disease are now offered alternative treatment options that cater to their individual needs. Furthermore, collaboration between interventional cardiologists and cardiac surgeons have led to the development of hybrid procedures, using the best techniques of each respective field to treat these complex cardiac entities from initial treatment in the pediatric patient to repeat intervention in the adult. We present a review of the increased popularity and trend in hybrid procedures in congenital heart disease without the use of cardiopulmonary bypass.

  15. Building a Successful Machine Safeguarding Program

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, S

    2003-03-06

    Safeguarding hazards associated with machines is a goal common to all health and safety professionals. Whether the individual is new to the safety field or has held associated responsibilities for a period of time, safeguarding personnel who work with or around machine tools and equipment should be considered an important aspect of the job. Although significant progress has been made in terms of safeguarding machines since the era prior to the organized safety movement, companies continue to be cited by the Occupational Safety and Health Administration (OSHA) and workers continue to be injured, even killed by machine tools and equipment. In the early 1900s, it was common practice to operate transmission machinery (gears, belts, pulleys, shafting, etc.) completely unguarded. At that time, the countersunk set screw used on shafting had not been invented and projecting set screws were involved in many horrific accidents. Manufacturers built machines with little regard for worker safety. Workers were killed or seriously injured before definitive actions were taken to improve safety in the workplace. Many states adopted legislation aimed at requiring machine guarding and improved injury reduction. The first patent for a machine safeguard was issued in 1868 for a mechanical interlock. Other patents followed. As methods for safeguarding machinery and tools were developed, standards were written and programs were set up to monitor factories for compliance. Many of those standards continue to govern how we protect workers today. It is common to see machine tools built in the forties, fifties and sixties being used in machine shops today. In terms of safeguarding, these machines may be considered poorly designed, improperly safeguarded or simply unguarded. In addition to the potential threat of an OSHA citation, these conditions expose the operator to serious hazards that must be addressed. The safety professional can help line management determine workable solutions for

  16. Experimental Study of Brushless Doubly-Fed Machine With Cage Rotor at the Asynchronous Operation Mode%笼型转子无刷双馈电机异步运行模式的实验研究

    Institute of Scientific and Technical Information of China (English)

    杜江; 韩力; 欧先朋; 韩雪峰

    2016-01-01

    By changing the control winding connection and feeding method of brushless doubly-fed machine (BDFM), many different operation modes can be obtained, such as asynchronous, synchronous, doubly-fed sub-synchronous and super-synchronous models. However, the detailed research about the asynchronous operation mode of BDFM is seldom. The concepts of “singly-fed asynchronous” and “doubly-fed asynchronous” operation modes were proposed. The basic electromagnetic relationship of these asynchronous operation modes were described in detail based on the features of BDFM with cage rotor. The air-gap magnetic field waveforms were analyzed by finite element, which verified that the constant electromagnetic torque could be produced at two different asynchronous operation modes. The results of finite element analysis and the comparisons of the test data show that the operating characteristics of BDFM singly-fed asynchronous mode are similar with induction motor, the speed still meet the characteristics of BDFM and can be adjusted by changing the external series resistance of control winding at doubly-fed asynchronous operation mode. The results can provide reference for studying the operation rules of BDFM in the further.%无刷双馈电机(brushless doubly-fed machine,BDFM)通过改变控制绕组的联接与馈电方式,可实现异步、同步、双馈亚同步和超同步等多种不同运行方式。然而,目前尚缺乏对BDFM异步运行模式的详细研究。该文提出了BDFM“单馈异步”和“双馈异步”运行模式的概念,结合笼型转子 BDFM的特点,阐述了两种异步运行模式的基本电磁关系,利用有限元分析得到了 BDFM 样机的气隙磁场波形,从而验证了两种运行模式均能产生恒定电磁转矩。通过对BDFM 样机在两种异步运行模式下的有限元分析和实验数据对比,表明 BDFM 单馈异步运行模式与普通异步电动机的运行特性相类似,在双馈异步运

  17. Surface mining machines problems of maintenance and modernization

    CERN Document Server

    Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

    2017-01-01

    This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

  18. Analysis on steady-state mathematical models and operating characteristics of brushless doubly-fed machine%无刷双馈电机稳态数学模型和运行特性分析

    Institute of Scientific and Technical Information of China (English)

    韩力; 罗杰; 王华; 潘红广

    2013-01-01

    为了深入研究笼型转子无刷双馈电机(brushless doubly-fed machine,BDFM)的稳态特性,从耦合电路出发,给出了BDFM的基本方程式,进而分析并得到了BDFM电流、有功功率、无功功率、电磁转矩和功率因数的数学模型.在此基础上,通过Matlab对1台样机进行了仿真,获得了BDFM的矩角特性、矩频特性、功角特性、无功特性、功率因数特性和V形曲线,并利用数学模型分析了BDFM的能量转换.结果表明:BDFM的各种稳态特性均可表示为控制绕组电压、频率和功角这3个变量的函数,所提出的模型简化了BDFM稳态特性的分析方法,为进一步研究BDFM的稳定性和控制策略奠定了理论基础.%To further study the steady-state characteristics of brushless doubly-fed machine(BDFM) with squirrel-rotor,the basic equations are given according to the coupling circuits of BDFM.And then,the mathematical models of BDFM current,active power,reactive power,electromagnetic torque and power factor are analyzed and derived respectively.Furthermore,the characteristics of torque-angle,torquefrequency,power-angle,reactive power,power factor and V-shaped curve of BDFM are obtained respectively by MATLAB simulation of a prototype.The energy conversion of BDFM is analyzed by the proposed mathematical models at the same time.The results show that all the steady-state characteristics of BDFM can be expressed as the functions of the control windings voltage,frequency and the power angle.The proposed model simplifies the analysis of the steady-state characteristics of BDFM and provides a theoretical foundation for the further study on operating stability and control strategy of BDFM.

  19. Quantum machine learning.

    Science.gov (United States)

    Biamonte, Jacob; Wittek, Peter; Pancotti, Nicola; Rebentrost, Patrick; Wiebe, Nathan; Lloyd, Seth

    2017-09-13

    Fuelled by increasing computer power and algorithmic advances, machine learning techniques have become powerful tools for finding patterns in data. Quantum systems produce atypical patterns that classical systems are thought not to produce efficiently, so it is reasonable to postulate that quantum computers may outperform classical computers on machine learning tasks. The field of quantum machine learning explores how to devise and implement quantum software that could enable machine learning that is faster than that of classical computers. Recent work has produced quantum algorithms that could act as the building blocks of machine learning programs, but the hardware and software challenges are still considerable.

  20. Precision machine design

    CERN Document Server

    Slocum, Alexander H

    1992-01-01

    This book is a comprehensive engineering exploration of all the aspects of precision machine design - both component and system design considerations for precision machines. It addresses both theoretical analysis and practical implementation providing many real-world design case studies as well as numerous examples of existing components and their characteristics. Fast becoming a classic, this book includes examples of analysis techniques, along with the philosophy of the solution method. It explores the physics of errors in machines and how such knowledge can be used to build an error budget for a machine, how error budgets can be used to design more accurate machines.

  1. [Research on infrared safety protection system for machine tool].

    Science.gov (United States)

    Zhang, Shuan-Ji; Zhang, Zhi-Ling; Yan, Hui-Ying; Wang, Song-De

    2008-04-01

    In order to ensure personal safety and prevent injury accident in machine tool operation, an infrared machine tool safety system was designed with infrared transmitting-receiving module, memory self-locked relay and voice recording-playing module. When the operator does not enter the danger area, the system has no response. Once the operator's whole or part of body enters the danger area and shades the infrared beam, the system will alarm and output an control signal to the machine tool executive element, and at the same time, the system makes the machine tool emergency stop to prevent equipment damaged and person injured. The system has a module framework, and has many advantages including safety, reliability, common use, circuit simplicity, maintenance convenience, low power consumption, low costs, working stability, easy debugging, vibration resistance and interference resistance. It is suitable for being installed and used in different machine tools such as punch machine, pour plastic machine, digital control machine, armor plate cutting machine, pipe bending machine, oil pressure machine etc.

  2. Repletion of factor XIII following cardiopulmonary bypass using a recombinant A-subunit homodimer. A preliminary report

    DEFF Research Database (Denmark)

    Levy, Jerrold H; Gill, Ravi; Nussmeier, Nancy A

    2009-01-01

    Bleeding following cardiac surgery involving cardiopulmonary bypass (CPB) remains a major concern. Coagulation factor XIII (FXIII) functions as a clot-stabilising factor by cross-linking fibrin. Low post-operative levels of FXIII correlate with increased post-operative blood loss. To evaluate...... reviewing ECGs and cardiac enzymes. No other thromboembolic events were seen. Dosing with 25-50 IU/kg rFXIII-A(2) restored levels of FXIII to pre-operative levels, with a tendency towards an overshoot in receiving 50 IU/kg. rFXIII-A(2), in doses from 11.9 IU/kg up to 50 IU/kg, was well tolerated. For post...

  3. Machine Process Capability Information Through Six Sigma

    Energy Technology Data Exchange (ETDEWEB)

    Lackner, M.F.

    1998-03-13

    A project investigating details concerning machine process capability information and its accessibility has been conducted. The thesis of the project proposed designing a part (denoted as a machine capability workpiece) based on the major machining features of a given machine. Parts are machined and measured to gather representative production, short-term variation. The information is utilized to predict the expected defect rate, expressed in terms of a composite sigma level process capability index, for a production part. Presently, decisions concerning process planning, particularly what machine will statistically produce the minimum amount of defects based on machined features and associated tolerances, are rarely made. Six sigma tools and methodology were employed to conduct this investigation at AlliedSignal FM and T. Tools such as the thought process map, factor relationship diagrams, and components of variance were used. This study is progressing toward completion. This research study was an example of how machine process capability information may be gathered for milling planar faces (horizontal) and slot features. The planning method used to determine where and how to gather variation for the part to be designed is known as factor relationship diagramming. Components-of-variation is then applied to the gathered data to arrive at the contributing level of variation illustrated within the factor relationship diagram. The idea of using this capability information beyond process planning to the other business enterprise operations is proposed.

  4. Chemical Implementation of Finite-State Machines

    Science.gov (United States)

    Hjelmfelt, Allen; Weinberger, Edward D.; Ross, John

    1992-01-01

    With methods developed in a prior article on the chemical kinetic implementation of a McCulloch-Pitts neuron, connections among neurons, logic gates, and a clocking mechanism, we construct examples of clocked finite-state machines. These machines include a binary decoder, a binary adder, and a stack memory. An example of the operation of the binary adder is given, and the chemical concentrations corresponding to the state of each chemical neuron are followed in time. Using these methods, we can, in principle, construct a universal Turing machine, and these chemical networks inherit the halting problem

  5. Applied genetic programming and machine learning

    CERN Document Server

    Iba, Hitoshi; Paul, Topon Kumar

    2009-01-01

    What do financial data prediction, day-trading rule development, and bio-marker selection have in common? They are just a few of the tasks that could potentially be resolved with genetic programming and machine learning techniques. Written by leaders in this field, Applied Genetic Programming and Machine Learning delineates the extension of Genetic Programming (GP) for practical applications. Reflecting rapidly developing concepts and emerging paradigms, this book outlines how to use machine learning techniques, make learning operators that efficiently sample a search space, navigate the searc

  6. Research on menu-typed man-machine interaction system of digital TIG welding machine

    Institute of Scientific and Technical Information of China (English)

    何建萍; 张春波; 孙广; 吴毅雄; 焦馥杰

    2004-01-01

    A digital man-machine interaction system controlled by communications between two processors of TMS320F240 and AT98C2051 was researched in the paper. The system is easy to set and modify welding process parameters by keyboards, and display information of welding site by LCD (Liquid Crystal Display). As one part of multi-task system about TIG welding machine, the coordination of man-machine interaction system with other tasks is the main point to the stability and reliability of its operation. Experiments result indicates that the system is stable, operation-flexible, high precision, and anti-interfering.

  7. Application of Laser Positioning Device to C Arm X-ray Machine in Operating Room%激光准直定位装置应用于手术室C型臂X线机的研究

    Institute of Scientific and Technical Information of China (English)

    王晓民; 杨蕾; 贾汉泉; 刘延梅

    2012-01-01

    Objective To design a laser positioning device so as to apply on C arm X-ray machine of SIEMENS ARCADIS Varic in the operating room. Methods Several design schemes had been compared. The optimal design was then determined and made. Positioning line cross was formed on the plane paralleled to the image enhancement board using two semiconductor lasers supplied by three NO.5 batteries, so precise orientation of laser spot center was realized. The batteries were put in a switch box fixed on the chassis. The electric wire was held in place by aluminum plate, wire clip and hot-melt adhesive. Lasers matched the oblique outer edge of C arm X-ray machine perfectly. Results The maximal distance between the positioning tine cross and the image enhancement board was 80 centimeters. The technical indicators, such as security, positioning accuracy and handiness. had been realized. And the clinical diagnosis demands had been met. Conclusion The device is cost-effective and reliable. The X-ray irradiation time can be reduced, and the accumulated radiation dose of patients and doctors can also be reduced. The device can he applied to other C arm X-ray machines in this way.[Chinese Medical Equipment Journal,2012,33(5):32-34]%目的:研制一款激光准直定位装置应用于手术室西门子ARCADIS Varic C型臂X线机.方法:通过比较几种不同设计方案的优、缺点,确定了最优设计方案,并完成了装置的制作.采用2个由3节5号电池供电的一字形半导体激光器,在平行于影像增强板的平面上形成十字形定位线,实现中心定位;电池置于开关控制盒内并固定在机架上;供电线采用铝塑板、线扎及热溶胶等固定;激光器部分与球管端的斜外缘塑料外壳相配合.结果:此装置所形成的十字定位线距离影像增强板最高可达80 cm,定位准确、操作方便,很好地满足了临床诊断的需要.结论:该激光准直定位装置大大减少了设备采购支出,有望缩短X线照

  8. Effects of Cardiopulmonary Bypass on Renal Perfusion, Filtration, and Oxygenation in Patients Undergoing Cardiac Surgery.

    Science.gov (United States)

    Lannemyr, Lukas; Bragadottir, Gudrun; Krumbholz, Vitus; Redfors, Bengt; Sellgren, Johan; Ricksten, Sven-Erik

    2017-02-01

    Acute kidney injury is a common complication after cardiac surgery with cardiopulmonary bypass. The authors evaluated the effects of normothermic cardiopulmonary bypass on renal blood flow, glomerular filtration rate, renal oxygen consumption, and renal oxygen supply/demand relationship, i.e., renal oxygenation (primary outcome) in patients undergoing cardiac surgery. Eighteen patients with a normal preoperative serum creatinine undergoing cardiac surgery procedures with normothermic cardiopulmonary bypass (2.5 l · min · m) were included after informed consent. Systemic and renal hemodynamic variables were measured by pulmonary artery and renal vein catheters before, during, and after cardiopulmonary bypass. Arterial and renal vein blood samples were taken for measurements of renal oxygen delivery and consumption. Renal oxygenation was estimated from the renal oxygen extraction. Urinary N-acetyl-β-D-glucosaminidase was measured before, during, and after cardiopulmonary bypass. Cardiopulmonary bypass induced a renal vasoconstriction and redistribution of blood flow away from the kidneys, which in combination with hemodilution decreased renal oxygen delivery by 20%, while glomerular filtration rate and renal oxygen consumption were unchanged. Thus, renal oxygen extraction increased by 39 to 45%, indicating a renal oxygen supply/demand mismatch during cardiopulmonary bypass. After weaning from cardiopulmonary bypass, renal oxygenation was further impaired due to hemodilution and an increase in renal oxygen consumption, accompanied by a seven-fold increase in the urinary N-acetyl-β-D-glucosaminidase/creatinine ratio. Cardiopulmonary bypass impairs renal oxygenation due to renal vasoconstriction and hemodilution during and after cardiopulmonary bypass, accompanied by increased release of a tubular injury marker.

  9. Design of Waste Shredder Machine

    Directory of Open Access Journals (Sweden)

    Asst. Prof. S.Nithyananth

    2014-03-01

    Full Text Available The conventional agro-waste disposal is a traditional and oldest method of waste disposal in which agriculture wastes are dumped as it is to degrade in a particular place for decomposing. As the wastes are dumped as such, it takes more time to degrade and it causes environmental pollution. The waste shredder machine aims to reduce the agro waste and convert it into useful nourishing fertilizer. It decreases the man work making the farm neat and clean. Also it reduces the heap amount of pollution, disease causing agro-wastes and produces a better fertilizer with vermin compost. The waste shredder machine is an attachment as like a ploughing attachment. In the shredder attachment input power and rigid support is provided by a KAMCO Tera-trac 4W tractor by means of PTO (power take off shaft and three point linkage. PTO shaft of the tractor acts as a basic power input and the three point linkage provide a rigid support to the machine. Various kinds of blades are used for chipping and powdering operations like sawing blades, rotatory blades, and triangular shape blades. The blades are mounted on the shaft. The power is transmitted to another shaft by means of pulley and belt. For designing waste shredder machine, Creo parametric 1.0 software is used.

  10. The need to immobilise the cervical spine during cardiopulmonary resuscitation and electric shock administration in out-of-hospital cardiac arrest.

    Science.gov (United States)

    Desroziers, Milene; Mole, Sophie; Jost, Daniel; Tourtier, Jean-Pierre

    2016-06-13

    In cases of out-of hospital cardiac arrest (OHCA), falling to the ground can cause brain and neck trauma to the patient. We present a case of a man in his mid-60s who suffered from an OHCA resulting in a violent collapse. The patient received immediate cardiopulmonary resuscitation, but his spine was immobilised only after a large frontal haematoma was found. The resuscitation efforts resulted in return of spontaneous circulation and discharge from hospital. After this, doctors performed angioplasty, followed by a cardiopulmonary bypass. Later, CT scan examination reported a displaced and unstable fracture of the 6th vertebra without bone marrow involvement. The patient underwent a second operation. 40 days later, he was able to return home without sequela. This case shows the importance of analysing the circumstances of a fall, considering the possibility of two concomitant diagnoses and prioritising investigations and treatment.

  11. Estimation of arterial and cardiopulmonary total peripheral resistance baroreflex gain values: validation by chronic arterial baroreceptor denervation.

    Science.gov (United States)

    Mukkamala, Ramakrishna; Kim, Jong-Kyung; Li, Ying; Sala-Mercado, Javier; Hammond, Robert L; Scislo, Tadeusz J; O'Leary, Donal S

    2006-05-01

    Feedback control of total peripheral resistance (TPR) by the arterial and cardiopulmonary baroreflex systems is an important mechanism for short-term blood pressure regulation. Existing methods for measuring this TPR baroreflex mechanism typically aim to quantify only the gain value of one baroreflex system as it operates in open-loop conditions. As a result, the normal, integrated functioning of the arterial and cardiopulmonary baroreflex control of TPR remains to be fully elucidated. To this end, the laboratory of Mukkamala et al. (Mukkamala R, Toska K, and Cohen RJ. Am J Physiol Heart Circ Physiol 284: H947-H959, 2003) previously proposed a potentially noninvasive technique for estimating the closed-loop (dimensionless) gain values of the arterial TPR baroreflex (GA) and the cardiopulmonary TPR baroreflex (GC) by mathematical analysis of the subtle, beat-to-beat fluctuations in arterial blood pressure, cardiac output, and stroke volume. Here, we review the technique with additional details and describe its experimental evaluation with respect to spontaneous hemodynamic variability measured from seven conscious dogs, before and after chronic arterial baroreceptor denervation. The technique was able to correctly predict the group-average changes in GA and GC that have previously been shown to occur following chronic arterial baroreceptor denervation. That is, reflex control by the arterial TPR baroreflex was virtually abolished (GA = -2.1 +/- 0.6 to 0.3 +/- 0.2; P TPR baroreflex more than doubled (GC = -0.7 +/- 0.4 to -1.8 +/- 0.2; P TPR baroreflex functioning in both humans and animals in health and disease.

  12. Cardiopulmonary Benefits of Reducing Indoor Particles of Outdoor Origin: a Randomized Double-Blind Crossover Trial of Air Purifiers

    Science.gov (United States)

    Chen, Renjie; Zhao, Ang; Chen, Honglei; Zhao, Zhuohui; Cai, Jing; Wang, Cuicui; Yang, Changyuan; Li, Huichu; Xu, Xiaohui; Ha, Sandie; Li, Tiantian; Kan, Haidong

    2017-01-01

    Background Indoor exposure to fine particulate matter (PM2.5) from outdoor sources is a major health concern, especially in highly polluted developing countries, such as China. Few studies have evaluated the effectiveness of indoor air purification on the improvement of cardiopulmonary health in these areas. Objectives To evaluate whether a short-term indoor air purifier intervention improves cardiopulmonary health. Methods We conducted a randomized double-blind crossover trial among 35 healthy college students in Shanghai, China in 2014. These students lived in dormitories that were randomized into 2 groups and alternated the use of true or sham air purifiers for 48 h with a 2-week washout interval. We measured 14 circulating biomarkers of inflammation, coagulation and vasoconstriction, lung function, blood pressure (BP), and fractional exhaled nitric oxide (FeNO). We applied linear mixed-effect models to evaluate the effect of the intervention on health outcome variables. Results On average, air purification resulted in a 57% reduction in PM2.5 concentration from 96.2 to 41.3 μg/m3 within hours of operation. Air purification was significantly associated with decreases in geometric means of several circulating inflammatory and thrombogenic biomarkers, including 17.5% in monocyte chemoattractant protein-1, 68.1% in interleukin-1β, 32.8% in myeloperoxidase and 64.9% in soluble CD40 ligand. Further, systolic BP, diastolic BP, and FeNO were significantly decreased by 2.7%, 4.8%, and 17.0% in geometric mean, respectively. The impacts on lung function and vasoconstriction biomarkers were beneficial, but not statistically significant. Conclusion This intervention study demonstrated clear cardiopulmonary benefits of indoor air purification among young, healthy adults in a Chinese city with severe ambient particulate air pollution. (Intervention Study on the Health Impact of Air Filters in Chinese Adults; NCT02239744) PMID:26022815

  13. An Operating Environment for the Jellybean Machine

    Science.gov (United States)

    1988-05-01

    of page D N7 1d73 EDI1TION O’ INOVSSI1S OWLETE UNCLASSIFIED SINS~SSI4SISECURITY CLASSIFICATION OF THISI PAGE 769;0. s 16rn1 Block 20 cont’d Ile...and (3)’we are not always aware when " dead " pointers get changed. For these reasons, we decided to attempt some variant of a pointer chasing garbage...HEAD~t DEAD (i n ~ * e ~ tin gam CALL (MOajd~ouL* SEND (ubWfMiww4<Smiuplbu REPLY (ca(.mg -~ "Joa~e its msdf dotM be nmm4c,at$cm T~M<Qorm"dbw. Re

  14. Cardiopulmonary exercise testing (CPET) as preoperative test before lung resection.

    Science.gov (United States)

    Kallianos, Anastasios; Rapti, Aggeliki; Tsimpoukis, Sotirios; Charpidou, Andriani; Dannos, Ioannis; Kainis, Elias; Syrigos, Konstantinos

    2014-01-01

    Lung resection is still the only potentially curative therapy for patients with localized non-small lung cancer (NSCLC). However, the presence of cardiovascular comorbidities and underlying lung disease increases the risk of postoperative complications. Various studies have evaluated the use of different preoperative tests in order to identify patients with an increased risk for postoperative complications, associated with prolonged hospital stay and increased morbidity and mortality. In this topic review, we discuss the role of cardiopulmonary exercise testing (CPET) as one of the preoperative tests suggested for lung cancer patients scheduled for lung resection. We describe different types of exercise testing techniques and present algorithms of preoperative evaluation in lung cancer patients. Overall, patients with maximal oxygen consumption (VO2max) VO2max <15 mL/kg/min and both postoperative FEV1 and DLCO<40% predicted, are at high risk for perioperative death and postoperative cardiopulmonary complications, and thus should be offered an alternative medical treatment option. Copyright © 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  15. Gravity and the evolution of cardiopulmonary morphology in snakes.

    Science.gov (United States)

    Lillywhite, Harvey B; Albert, James S; Sheehy, Coleman M; Seymour, Roger S

    2012-02-01

    Physiological investigations of snakes have established the importance of heart position and pulmonary structure in contexts of gravity effects on blood circulation. Here we investigate morphological correlates of cardiopulmonary physiology in contexts related to ecology, behavior and evolution. We analyze data for heart position and length of vascular lung in 154 species of snakes that exhibit a broad range of characteristic behaviors and habitat associations. We construct a composite phylogeny for these species, and we codify gravitational stress according to species habitat and behavior. We use conventional regression and phylogenetically independent contrasts to evaluate whether trait diversity is correlated with gravitational habitat related to evolutionary transitions within the composite tree topology. We demonstrate that snake species living in arboreal habitats, or which express strongly climbing behaviors, possess relatively short blood columns between the heart and the head, as well as relatively short vascular lungs, compared to terrestrial species. Aquatic species, which experience little or no gravity stress in water, show the reverse - significantly longer heart-head distance and longer vascular lungs. These phylogenetic differences complement the results of physiological studies and are reflected in multiple habitat transitions during the evolutionary histories of these snake lineages, providing strong evidence that heart-to-head distance and length of vascular lung are co-adaptive cardiopulmonary features of snakes.

  16. Hypothermia and normothermia effects on mortality rate of cardiopulmonary bypass

    Directory of Open Access Journals (Sweden)

    Ali Rahdari

    2015-12-01

    Full Text Available Introduction: Cardiopulmonary bypass is associated with higher risk of mortality and morbidity, thus it should be investigated regarding the major risk factors. Temperature management have a significant role in postoperative cerebral and neurological complications; however the optimum temperature during cardiopulmonary surgery is not certainly detected. This systematic review has investigated the differences between hypothermia and normothermia regarding postoperative mortality. Method: PubMed was searched for the relevant articles. Only English language articles were included with no time limitation. Data regarding in-hospital patient deaths provided in each article mostly within 30 days after the surgery, were extracted and compared based on relative risk reduction (RRR, absolute risk reduction (ARR, and number needed to treat (NNT.Result: Totally, 28 articles were retrieved and extracted. The mortality rate was zero in hypothermic and normotehrmic groups of 8/28 included studies, thus the RRR, ARR, and NNT could not be calculated. There were no significant differences between investigated groups of each included studies regarding the patients’ age, gender, and preoperative conditions.Conclusions: No significant difference was obtained between two studied groups. Similar prevalence of death observed between hypothermic and normothermic groups might be due to the sample size of studies, or the subsequent cares performed in intensive care units that assist to reduce the postoperative mortality rate. According to the obtained results, both of these procedures might be similarly safe regarding mortality rate.

  17. Home-based mobile cardio-pulmonary rehabilitation consultant system.

    Science.gov (United States)

    Lee, Hsu-En; Wang, Wen-Chih; Lu, Shao-Wei; Wu, Bo-Yuan; Ko, Li-Wei

    2011-01-01

    Cardiovascular diseases are the most popular cause of death in the world recently. For postoperatives, cardiac rehabilitation is still asked to maintain at home (phase II) to improve cardiac function. However, only one third of outpatients do the exercise regularly, reflecting the difficulty for home-based healthcare: lacking of monitoring and motivation. Hence, a cardio-pulmonary rehabilitation system was proposed in this research to improve rehabilitation efficiency for better prognosis. The proposed system was built on mobile phone and receiving electrocardiograph (ECG) signal from a wireless ECG holter via Bluetooth connection. Apart from heart rate (HR) monitor, an ECG derived respiration (EDR) technique is also included to provide respiration rate (RR). Both HR and RR are the most important vital signs during exercise but only used one physiological signal recorder in this system. In clinical test, there were 15 subjects affording Bruce Task (treadmill) to simulate rehabilitation procedure. Correlation between this system and commercial product (Custo-Med) was up to 98% in HR and 81% in RR. Considering the prevention of sudden heart attack, an arrhythmia detection expert system and healthcare server at the backend were also integrated to this system for comprehensive cardio-pulmonary monitoring whenever and wherever doing the exercise.

  18. Effects of resistance exercise on cardiopulmonary factors in sedentary individuals.

    Science.gov (United States)

    Janyacharoen, Taweesak; Thayon, Methiya; Bushong, Wanwisa; Jaikla, Nussamol; Sawanyawisuth, Kittisak

    2016-01-01

    [Purpose] This study investigated the effects of resistance exercise on cardiopulmonary functions in young sedentary subjects. [Subjects] Forty-two young and healthy subjects with a sedentary lifestyle were included in this study. [Methods] The subjects were randomly divided into 2 groups: control and experimental. The control group (n=21) received health education and continued with normal activities of daily living. The experimental group (n=21) underwent resistance training, health education, and continued with normal activities of daily living. The resistance exercise program consisted of 3 postural exercises: chest press, dumbbell pullover, and flat-bench dumbbell fly. The subjects received this intervention 3 times/week for 8 weeks. [Results] The baseline characteristics were comparable between the 2 groups. The 6-minute-walk test score, peak expiratory flow, forced vital capacity, forced expiratory volume in 1 second, maximal voluntary ventilation, and chest expansions were significantly improved post-intervention in the experimental group and between the 2 groups. [Conclusion] Cardiopulmonary functions in young sedentary subjects were significantly improved with the 8-week resistance exercise program.

  19. Postgraduate Education for Physical Therapists at Cardiopulmonary Area in Colombia

    Directory of Open Access Journals (Sweden)

    Diana Durán Palomino

    2007-09-01

    Full Text Available This paper presents the supply of postdegreeprograms in the cardiopulmonary area in Colombiain orden to show its state and sufficiency.Plans of formation, objectives, curricular approach,methodology and profile of performanceare analyzed in terms of costs, duration,supply, location and research capabilities.Our results show problems in regard to supplyas well as unanimous criteria and strategic alliances.There are no Gremial associations thatfavor both discussion and analysis about epidemiologistaspects of respiratory and cardiovasculardiseases in Colombia there is necessityof professionals in this area with experience.Knowledge and appropiated skills in management,administration, laws, agreements andpublic policies that cover the affected population.Also, it is exposed that the Universities whitthis programs require support and pursuit forprofessionals positioning both in national andinternational context.MethodologyA descriptive study was carried out with a datacollection made in a period between April-Decemberof 2006. Cards were done and they allowedto review different aspects such as costs,occupational profile, duration, modality, methodology,practical component and evaluation inthe offering universities of programs of postdegreein the cardiopulmonary area for physiotherapists.Later an analysis was made oncurriculum, profiles, objectives, contents, professionalcompetitions the areas of research.

  20. Myocardial contractile function in survived neonatal piglets after cardiopulmonary bypass

    Directory of Open Access Journals (Sweden)

    Popov Aron-Frederik

    2010-11-01

    Full Text Available Abstract Background Hemodynamic function may be depressed in the early postoperative stages after cardiac surgery. The aim of this study was the analysis of the myocardial contractility in neonates after cardiopulmonary bypass (CPB and mild hypothermia. Methods Three indices of left ventricular myocardial contractile function (dP/dt, (dP/dt/P, and wall thickening were studied up to 6 hours after CPB in neonatal piglets (CPB group; n = 4. The contractility data were analysed and then compared to the data of newborn piglets who also underwent median thoracotomy and instrumentation for the same time intervals but without CPB (non-CPB group; n = 3. Results Left ventricular dP/dtmax and (dP/dtmax/P remained stable in CPB group, while dP/dtmax decreased in non-CPB group 5 hours postoperatively (1761 ± 205 mmHg/s at baseline vs. 1170 ± 205 mmHg/s after 5 h; p max and (dP/dtmax/P there were no statistically significant differences between the two groups. Comparably, although myocardial thickening decreased in the non-CPB group the differences between the two groups were not statistically significant. Conclusions The myocardial contractile function in survived neonatal piglets remained stable 6 hours after cardiopulmonary bypass and mild hypothermia probably due to regional hypercontractility.

  1. Gravity and the Evolution of Cardiopulmonary Morphology in Snakes

    Science.gov (United States)

    Lillywhite, Harvey B.; Albert, James S.; Sheehy, Coleman M.; Seymour, Roger S.

    2011-01-01

    Physiological investigations of snakes have established the importance of heart position and pulmonary structure in contexts of gravity effects on blood circulation. Here we investigate morphological correlates of cardiopulmonary physiology in contexts related to ecology, behavior and evolution. We analyze data for heart position and length of vascular lung in 154 species of snakes that exhibit a broad range of characteristic behaviors and habitat associations. We construct a composite phylogeny for these species, and we codify gravitational stress according to species habitat and behavior. We use conventional regression and phylogenetically independent contrasts to evaluate whether trait diversity is correlated with gravitational habitat related to evolutionary transitions within the composite tree topology. We demonstrate that snake species living in arboreal habitats, or which express strongly climbing behaviors, possess relatively short blood columns between the heart and the head, as well as relatively short vascular lungs, compared to terrestrial species. Aquatic species, which experience little or no gravity stress in water, show the reverse – significantly longer heart–head distance and longer vascular lungs. These phylogenetic differences complement the results of physiological studies and are reflected in multiple habitat transitions during the evolutionary histories of these snake lineages, providing strong evidence that heart–to–head distance and length of vascular lung are co–adaptive cardiopulmonary features of snakes. PMID:22079804

  2. Survival without sequelae after prolonged cardiopulmonary resuscitation after electric shock.

    Science.gov (United States)

    Motawea, Mohamad; Al-Kenany, Al-Sayed; Hosny, Mostafa; Aglan, Omar; Samy, Mohamad; Al-Abd, Mohamed

    2016-03-01

    "Electrical shock is the physiological reaction or injury caused by electric current passing through the human body. It occurs upon contact of a human body part with any source of electricity that causes a sufficient current through the skin, muscles, or hair causing undesirable effects ranging from simple burns to death." Ventricular fibrillation is believed to be the most common cause of death after electrical shock. "The ideal duration of cardiac resuscitation is unknown. Typically prolonged cardiopulmonary resuscitation is associated with poor neurologic outcomes and reduced long term survival. No consensus statement has been made and traditionally efforts are usually terminated after 15-30 minutes." The case under discussion seems worthy of the somewhat detailed description given. It is for a young man who survived after 65 minutes after electrical shock (ES) after prolonged high-quality cardiopulmonary resuscitation (CPR), multiple defibrillations, and artificial ventilation without any sequelae. Early start of adequate chest compressions and close adherence to advanced cardiac life support protocols played a vital role in successful CPR.

  3. Hydraulic Power Plant Machine Dynamic Diagnosis

    Directory of Open Access Journals (Sweden)

    Hans Günther Poll

    2006-01-01

    Full Text Available A method how to perform an entire structural and hydraulic diagnosis of prototype Francis power machines is presented and discussed in this report. Machine diagnosis of Francis units consists on a proper evaluation of acquired mechanical, thermal and hydraulic data obtained in different operating conditions of several rotary and non rotary machine components. Many different physical quantities of a Francis machine such as pressure, strains, vibration related data, water flow, air flow, position of regulating devices and displacements are measured in a synchronized way so that a relation of cause an effect can be developed for each operating condition and help one to understand all phenomena that are involved with such kind of machine. This amount of data needs to be adequately post processed in order to allow correct interpretation of the machine dynamics and finally these data must be compared with the expected calculated data not only to fine tuning the calculation methods but also to accomplish fully understanding of the influence of the water passages on such machines. The way how the power plant owner has to operate its Francis machines, many times also determined by a central dispatcher, has a high influence on the fatigue life time of the machine components. The diagnostic method presented in this report helps one to understand the importance of adequate operation to allow a low maintenance cost for the entire power plant. The method how to acquire these quantities is discussed in details together with the importance of correct sensor balancing, calibration and adequate correlation with the physical quantities. Typical results of the dynamic machine behavior, with adequate interpretation, obtained in recent measurement campaigns of some important hydraulic turbines were presented. The paper highlights the investigation focus of the hydraulic machine behavior and how to tailor the measurement strategy to accomplish all goals. Finally some

  4. 49 CFR 214.527 - On-track roadway maintenance machines; inspection for compliance and schedule for repairs.

    Science.gov (United States)

    2010-10-01

    ... operator's seat shall be replaced or repaired within 24 hours or by the start of the machine's next tour of duty, whichever is later. The machine may be operated for the remainder of the operator's tour of duty... roadway maintenance machines; inspection for compliance and schedule for repairs. (a) The operator of...

  5. Study on Simulation of Machining Errors Caused by Cutting Force

    Institute of Scientific and Technical Information of China (English)

    SHAO Xiaodong; ZHANG Liu; LIN Zhaoxu

    2006-01-01

    Machining errors caused by cutting force are studied in this paper, and an algorithm to simulate errors is putted forward. In the method, continuous machining process is separated into many machining moments. The deformation of work-piece and cutter at every moment is calculated by finite element method. The machined work-piece is gained by Boolean operation between deformed work-piece and cutter. By analyzing data of final work-piece, machining errors are predicted. The method is proved true by experiment.

  6. Perspex machine: VII. The universal perspex machine

    Science.gov (United States)

    Anderson, James A. D. W.

    2006-01-01

    The perspex machine arose from the unification of projective geometry with the Turing machine. It uses a total arithmetic, called transreal arithmetic, that contains real arithmetic and allows division by zero. Transreal arithmetic is redefined here. The new arithmetic has both a positive and a negative infinity which lie at the extremes of the number line, and a number nullity that lies off the number line. We prove that nullity, 0/0, is a number. Hence a number may have one of four signs: negative, zero, positive, or nullity. It is, therefore, impossible to encode the sign of a number in one bit, as floating-point arithmetic attempts to do, resulting in the difficulty of having both positive and negative zeros and NaNs. Transrational arithmetic is consistent with Cantor arithmetic. In an extension to real arithmetic, the product of zero, an infinity, or nullity with its reciprocal is nullity, not unity. This avoids the usual contradictions that follow from allowing division by zero. Transreal arithmetic has a fixed algebraic structure and does not admit options as IEEE, floating-point arithmetic does. Most significantly, nullity has a simple semantics that is related to zero. Zero means "no value" and nullity means "no information." We argue that nullity is as useful to a manufactured computer as zero is to a human computer. The perspex machine is intended to offer one solution to the mind-body problem by showing how the computable aspects of mind and, perhaps, the whole of mind relates to the geometrical aspects of body and, perhaps, the whole of body. We review some of Turing's writings and show that he held the view that his machine has spatial properties. In particular, that it has the property of being a 7D lattice of compact spaces. Thus, we read Turing as believing that his machine relates computation to geometrical bodies. We simplify the perspex machine by substituting an augmented Euclidean geometry for projective geometry. This leads to a general

  7. Laser-assisted machining of difficult-to-machine materials

    Energy Technology Data Exchange (ETDEWEB)

    Incropera, F.P.; Rozzi, J.C.; Pfefferkorn, F.E.; Lei, S.; Shin, Y.C.

    1999-07-01

    Laser-assisted machining (LAM) is a hybrid process for which a difficult-to-machine material, such as a ceramic or super alloy, is irradiated by a laser source prior to material removal by a cutting tool. The process has the potential to significantly increase material removal rates, as well as to improve the geometry and properties of the finished work piece. Features and limitations of theoretical and experimental procedures for determining the transient thermal response of a work piece during LAM are described, and representative results are presented for laser-assisted turning of sintered silicon nitride. Significant physical trends are revealed by the calculations, as are guidelines for the selection of appropriate operating conditions.

  8. 无刷双馈电机工作原理和数学模型的研究%Research on Operational Principle and Mathematical Model of Brushless Doubly-Fed Machines

    Institute of Scientific and Technical Information of China (English)

    焦卫星; 程小华

    2012-01-01

    As a kind of new governing alternator, brushless doubly-fed machines have good prospects for de-velopment in the field of wind power generation and water power generation. This paper described the opera-tional principle and analyzed two kinds of mathematical models of BDFM which include three-axis static coor-dinate mathematical model and d-q coordinate mathematical model. Based on d-q coordinate mathematical model, dynamic simulation model in Matlab/Simulink of BDFM was set up. The mathematical model was proved to be correct through a series of simulation. It provided the foundation for future research on BDFM.%无刷双馈电机作为一种新型的交流调速电机,在风力发电和水力发电中都有很好的发展前景.本文介绍了该电机的工作原理,分析了该电机的两种数学模型-三相静止坐标系中的数学模型和d-q坐标系中的数学模型,并在d-q坐标系数学模型基础上搭建BDFM的Matlab/Simulink动态仿真模型,通过一系列的仿真验证了数学模型的正确性,为以后对该种电机进行深入的研究奠定了基础.

  9. Closed-loop control for cardiopulmonary management and intensive care unit sedation using digital imaging

    Science.gov (United States)

    Gholami, Behnood

    This dissertation introduces a new problem in the delivery of healthcare, which could result in lower cost and a higher quality of medical care as compared to the current healthcare practice. In particular, a framework is developed for sedation and cardiopulmonary management for patients in the intensive care unit. A method is introduced to automatically detect pain and agitation in nonverbal patients, specifically in sedated patients in the intensive care unit, using their facial expressions. Furthermore, deterministic as well as probabilistic expert systems are developed to suggest the appropriate drug dose based on patient sedation level. Patients in the intensive care unit who require mechanical ventilation due to acute respiratory failure also frequently require the administration of sedative agents. The need for sedation arises both from patient anxiety due to the loss of personal control and the unfamiliar and intrusive environment of the intensive care unit, and also due to pain or other variants of noxious stimuli. In this dissertation, we develop a rule-based expert system for cardiopulmonary management and intensive care unit sedation. Furthermore, we use probability theory to quantify uncertainty and to extend the proposed rule-based expert system to deal with more realistic situations. Pain assessment in patients who are unable to verbally communicate is a challenging problem. The fundamental limitations in pain assessment stem from subjective assessment criteria, rather than quantifiable, measurable data. The relevance vector machine (RVM) classification technique is a Bayesian extension of the support vector machine (SVM) algorithm which achieves comparable performance to SVM while providing posterior probabilities for class memberships and a sparser model. In this dissertation, we use the RVM classification technique to distinguish pain from non-pain as well as assess pain intensity levels. We also correlate our results with the pain intensity

  10. Machinability of advanced materials

    CERN Document Server

    Davim, J Paulo

    2014-01-01

    Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters.  A variety of factors determine a material's machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

  11. Pattern recognition & machine learning

    CERN Document Server

    Anzai, Y

    1992-01-01

    This is the first text to provide a unified and self-contained introduction to visual pattern recognition and machine learning. It is useful as a general introduction to artifical intelligence and knowledge engineering, and no previous knowledge of pattern recognition or machine learning is necessary. Basic for various pattern recognition and machine learning methods. Translated from Japanese, the book also features chapter exercises, keywords, and summaries.

  12. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  13. Machining of titanium alloys

    CERN Document Server

    2014-01-01

    This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

  14. Cost Effective Machining Of Ceramics (CEMOC)

    Energy Technology Data Exchange (ETDEWEB)

    Barkman, W.E.

    1997-04-18

    The purpose of the CEMOC program was to support U.S. industry needs in fabricating precision components, from difficult to machine materials, while maintaining and enhancing the precision manufacturing skills of the Oak Ridge Complex. Oak Ridge and partner company personnel worked in a team relationship wherein each contributed equally to the success of the program. In general, Oak Ridge contributed a wider range of expertise to a given task while the companies provided operations-specific equipment and shop-floor services. Process control technologies, machining procedures and parameters, and coolant-related environmental tasks were the primary focus areas. The companies were very pleased with the results of the CRADAs and are planning on continuing the relationships. Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, defense machinery, and automotive components. The required finishing operations involve a variety of technologies including process controls, machine coolants, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what are typically available to the CRADA partners. These partners contributed equipment, such as state-of-the-art machine tools, and operation-specific experience base. In addition, addressing these challenging tasks enabled Oak Ridge personnel to maintain familiarity with rapidly advancing technologies, such as those associated with computer control systems.

  15. Cardiopulmonary malformations in the inv/inv mouse.

    Science.gov (United States)

    McQuinn, T C; Miga, D E; Mjaatvedt, C H; Phelps, A L; Wessels, A

    2001-05-01

    The inv/inv mouse carries an insertional mutation in the inversin gene, (inv, for inversion of embryonic turning). Previously it had been reported that almost 100% of the homozygous offspring (inv/inv) were characterized by situs inversus totalis. In this report we identify the spectrum of cardiopulmonary anatomical abnormalities in inv/inv mice surviving to birth to determine whether the abnormalities seen are of the categories classically associated with human situs abnormalities. Stillborn mice, offspring that died unexpectedly (within 48 hr after birth), and neonates with phenotypic characteristics of situs inversus (right-sided stomachs, growth failure or jaundice) were processed for standard histological examination. Of 173 offspring, 34 (20%) neonates (11 stillborn, 9 unexpected deaths, and 14 mice with situs inversus phenotype) were examined, 27 of which were genotyped to be inv/inv. Interestingly, three inv/inv mice (11%) were found to have situs solitus. Twenty-four had situs inversus with normal, mirror-image cardiac anatomy (dextrocardia with atrioventricular concordance, ventriculoarterial concordance and a right aortic arch). The overall incidence of cardiovascular anomalies observed was 10 out of 27 (37%). The most frequent severe malformation, identified in 3 out of 27 animals, was a complex consisting of pulmonary infundibular stenosis/atresia with absence of pulmonary valve tissue and a ventricular septal defect. The pulmonary phenotype in inv/inv mice was situs inversus with occasional minor lobar abnormalities. We conclude that 1) cardiopulmonary malformations in inv/inv mice are not rare (37%), 2) the cardiopulmonary malformations observed in inv/inv specimens are not of the spectrum typically associated with human heterotaxia. In particular, inv/inv mice have a propensity for defects in the development of the right ventricular outflow tract and the interventricular septum, and 3) approximately one out of ten inv/inv mice is born with situs

  16. Evaluation of acute ischemic mitral regurgitation following cardiopulmonary bypass assessed by biplane transesophageal echocardiography.

    Science.gov (United States)

    Nakao, T; Fujimoto, K; Brodman, R F; Oka, Y

    1997-03-01

    The aim of this study was to evaluate pathogenesis and outcome of acute ischemic mitral regurgitation (MR) in patients undergoing coronary artery bypass grafting (CABG) using biplane transesophageal echocardiography (TEE). Biplane TEE was continuously monitored in a total of 96 patients who were scheduled for elective CABG surgery. Of 96 patients, 10 with no MR at stages 1 (after anesthetic induction but before skin incision) and 2 (after cardiopulmonary bypass [CPB] and decannulation) were excluded. In the remaining 86 patients with MR between stages 1 and 2, 45 (group A) had an increase in MR, and 41 (group B) had a decrease in MR. An increase in MR at stage 2 in group A was associated with a significant increase in annular diameter (p area (p area (p areas. In 7 patients in group A, MR increased continuously until stage 3 (after sternal closure) despite treatment. In 2 of these 7 patients, pulmonary venous systolic flow (PVSF) decreased during stage 2 and persisted to stage 3. The post operative course of these 2 patients was complicated with atrial fibrillation (AF). The increase in annular diameter and worsening in RWMA in RCA and/or LCX areas are associated with acute ischemic MR following CPB. The majority of acute ischemic MR cases were resolved by pharmacological intervention. Post operative AF was noted in 2 patients with acute ischemic MR associated with persistently decreased PVSF following CPB despite treatment.

  17. Rotating electrical machines

    CERN Document Server

    Le Doeuff, René

    2013-01-01

    In this book a general matrix-based approach to modeling electrical machines is promulgated. The model uses instantaneous quantities for key variables and enables the user to easily take into account associations between rotating machines and static converters (such as in variable speed drives).   General equations of electromechanical energy conversion are established early in the treatment of the topic and then applied to synchronous, induction and DC machines. The primary characteristics of these machines are established for steady state behavior as well as for variable speed scenarios. I

  18. Chaotic Boltzmann machines.

    Science.gov (United States)

    Suzuki, Hideyuki; Imura, Jun-ichi; Horio, Yoshihiko; Aihara, Kazuyuki

    2013-01-01

    The chaotic Boltzmann machine proposed in this paper is a chaotic pseudo-billiard system that works as a Boltzmann machine. Chaotic Boltzmann machines are shown numerically to have computing abilities comparable to conventional (stochastic) Boltzmann machines. Since no randomness is required, efficient hardware implementation is expected. Moreover, the ferromagnetic phase transition of the Ising model is shown to be characterised by the largest Lyapunov exponent of the proposed system. In general, a method to relate probabilistic models to nonlinear dynamics by derandomising Gibbs sampling is presented.

  19. Tribology in machine design

    CERN Document Server

    Stolarski, Tadeusz

    1999-01-01

    ""Tribology in Machine Design is strongly recommended for machine designers, and engineers and scientists interested in tribology. It should be in the engineering library of companies producing mechanical equipment.""Applied Mechanics ReviewTribology in Machine Design explains the role of tribology in the design of machine elements. It shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications within mechanical devices and systems.The computer offers today's designer the possibility of greater stringen

  20. Debugging the virtual machine

    Energy Technology Data Exchange (ETDEWEB)

    Miller, P.; Pizzi, R.

    1994-09-02

    A computer program is really nothing more than a virtual machine built to perform a task. The program`s source code expresses abstract constructs using low level language features. When a virtual machine breaks, it can be very difficult to debug because typical debuggers provide only low level machine implementation in formation to the software engineer. We believe that the debugging task can be simplified by introducing aspects of the abstract design into the source code. We introduce OODIE, an object-oriented language extension that allows programmers to specify a virtual debugging environment which includes the design and abstract data types of the virtual machine.