Analysis The Leanness of The Supply Chain By Fuzzy QFD

OpenAIRE

Mukesh Singh Baghel; Pavan Agrawal

2014-01-01

The new systems of doing business in manufacturing have evolved in recent decades Lean production. Lean production can be traced to the 1960s in Japan, when Toyota Motors started innovating changes in mass production to deal with its domestic automotive market. The term “Lean production” was coined around 1989 with the popularity of the book, the machine that can change the world written by researchers at the Massachusetts Institute of Technology (MIT). The term itself was coined ...

Healthcare Lean.

Science.gov (United States)

Long, John C

2003-01-01

Lean Thinking is an integrated approach to designing, doing and improving the work of people that have come together to produce and deliver goods, services and information. Healthcare Lean is based on the Toyota production system and applies concepts and techniques of Lean Thinking to hospitals and physician practices.

Investigation of High-Speed Cryogenic Machining Based on Finite Element Approach

Directory of Open Access Journals (Sweden)

Pooyan Vahidi Pashaki

Full Text Available Abstract The simulation of cryogenic machining process because of using a three-dimensional model and high process duration time in the finite element method, have been studied rarely. In this study, to overcome this limitation, a 2.5D finite element model using the commercial finite element software ABAQUS has been developed for the cryogenic machining process and by considering more realistic assumptions, the chip formation procedure investigated. In the proposed method, the liquid nitrogen has been used as a coolant. At the modeling of friction during the interaction of tools - chip, the Coulomb law has been used. In order to simulate the behavior of plasticity and failure criterion, Johnson-Cook model was used, and unlike previous investigations, thermal and mechanical properties of materials as a function of temperature were applied to the software. After examining accuracy of the model with present experimental data, the effect of parameters such as rake angle and the cutting speed as well as dry machining of aluminum alloy by the use of coupled dynamic temperature solution has been studied. Results indicated that at the cutting velocity of 10 m/s, cryogenic cooling has caused into decreasing 60 percent of tools temperature in comparison with the dry cooling. Furthermore, a chip which has been made by cryogenic machining were connected and without fracture in contrast to dry machining.

Virtual modelling of components of a production system as the tool of lean engineering

Science.gov (United States)

Monica, Z.

2015-11-01

Between the most effective techniques of manufacturing management is considered the Lean Engineering. The term “lean engineering” was created by Japanese manufacturers. The high efficiency of this method resulted in a meaningful growth in concern in the philosophy of Lean among European companies, and consequently the use of its European markets. Lean philosophy is an approach to manufacturing to minimize the use of all resources, including time. These are resources that are used in the company for a variety of activities. This implies, first identify and then eliminate activities which does not generate added value in the field of design, manufacturing, supply chain management, and customer relations. The producers of these principles not only employ teams multi-professional employees at all levels of the organization, but also use a more automated machines to produce large quantities of products with a high degree of diversity. Lean Engineering is to use a number of principles and practical guidelines that allow you to reduce costs by eliminating absolute extravagance, and also simplification of all manufacturing processes and maintenance. Nowadays it could be applied the powerful engineering programs to realize the concept of Lean Engineering. They could be described using the term CAD/CAM/CAE. They consist of completely different packages for both the design of elements, as well process design. Their common feature is generally considered with their application area. They are used for computer programs assisting the design, development and manufacturing phases of a manufacturing process. The idea of the presented work is to use the Siemens NX software for aiding the process of Lean Engineering system creating. The investigated system is a robotized workcell. In the NX system are created the components of the designed workcell such as machine tools, as industrial robot, as conveyors and buffers. The system let to functionally link these components to

lean-ISD.

Science.gov (United States)

Wallace, Guy W.

2001-01-01

Explains lean instructional systems design/development (ISD) as it relates to curriculum architecture design, based on Japan's lean production system. Discusses performance-based systems; ISD models; processes for organizational training and development; curriculum architecture to support job performance; and modular curriculum development. (LRW)

Investigation on Wire Electrochemical Micro Machining of Ni-based Metallic Glass

International Nuclear Information System (INIS)

Meng, Lingchao; Zeng, Yongbin; Zhu, Di

2017-01-01

Highlights: • WECMM with nanosecond pulses is proposed firstly for fabricating micro complex components based on metallic glasses. • Applicable electrolyte for WECMM of the Ni-based MG is discussed. • Significantly uniform machined surface is achieved in H_2SO_4 solution. • High machining efficiency and stability are obtained experimentally by modifying pulse waveforms and electrolyte compositions. • Complex microstructures of Ni-based MG are fabricated by WECMM with optimized parameters. - Abstract: Metallic glasses (MGs) have been recognized as promising materials for realizing high-performance micro devices in micro electromechanical systems (MEMS) due to their excellent functional and structural characteristics. However, the applications of MGs are currently limited because of the difficulty of shaping them on the microscale. Wire electrochemical micro machining (WECMM) is increasingly recognized as a flexible and effective method to fabricate complex-shaped micro metal components with many advantages relative to the thermomechanical processing, which appears to be well suitable for micro shaping of MGs. We consider the example of a Ni-based MG, Ni_7_2Cr_1_9Si_7B_2, which has a typical passivation characteristic in 0.1 M H_2SO_4 solution. The transpassive process can be used for localized material removal when combined with nanosecond pulsed WECMM technique. In present work, the applicable electrolyte for WECMM of the Ni-based MG was discussed firstly. Then the voltage pulse waveform and electrolyte composition were modified to improve machining efficiency and stability. Several complex microstructures such as micro curved cantilever beam, micro gear, and micro square helix were machined with different optimized parameters.

Lean Principles and Defense Information Technology Acquisition: An Investigation of the Determinants of Successful Application

Science.gov (United States)

Haley, M.

2013-01-01

The purpose of this study was to investigate whether or not there have been successful applications of lean manufacturing principles in highly variable defense IT environments. Specifically, the study assessed if implementation of the lean philosophies by a defense organization yielded repeatable, predictable results in software release schedules…

Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

Directory of Open Access Journals (Sweden)

Alexandra Mirela Cristina MUNTEANU

2017-06-01

Full Text Available This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by author in order to reveal Lean Six Sigma’s benefits.

Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

OpenAIRE

Alexandra Mirela Cristina MUNTEANU

2017-01-01

This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by...

Lean manufacturing: A better way for enhancement in productivity

Science.gov (United States)

Kumar Ahir, Pankaj; Kumar Yadav, Lalit; Singh Chandrawat, Saurabh

2012-03-01

Productivity is the impact of peoples working together. Machines are merely an extended way of collective imagination and energy. Lean Manufacturing is the most used method for continues improvement of business. Organization management philosophy focusing on the reduction of wastage to improve overall customer value. "Lean" operating principles began in manufacturing environments and are known by a variety of synonyms; Lean Manufacturing, Lean Production, Toyota Production System, etc. It is commonly believed that Lean started in Japan "The notable activities in keeping the price of Ford products low is the steady restriction of the production cycle. The longer an article is in the process of manufacture and the more it is moved about, the greater is its ultimate cost." "A systematic approach to identifying and eliminating waste through continuous improvement, flowing the product at the pull of the customer in pursuit of perfection."

Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system

International Nuclear Information System (INIS)

Fletcher, S; Longstaff, A P; Myers, A

2005-01-01

Geometric and thermal calibration of CNC machine tools is required in modern machine shops with volumetric accuracy assessment becoming the standard machine tool qualification in many industries. Laser interferometry is a popular method of measuring the errors but this, and other alternatives, tend to be expensive, time consuming or both. This paper investigates the feasibility of using a laser diode based system that capitalises on the low cost nature of the diode to provide multiple laser sources for fast error measurement using multilateration. Laser diode module technology enables improved wavelength stability and spectral linewidth which are important factors for laser interferometry. With more than three laser sources, the set-up process can be greatly simplified while providing flexibility in the location of the laser sources improving the accuracy of the system

Advanced Machine learning Algorithm Application for Rotating Machine Health Monitoring

Energy Technology Data Exchange (ETDEWEB)

Kanemoto, Shigeru; Watanabe, Masaya [The University of Aizu, Aizuwakamatsu (Japan); Yusa, Noritaka [Tohoku University, Sendai (Japan)

2014-08-15

The present paper tries to evaluate the applicability of conventional sound analysis techniques and modern machine learning algorithms to rotating machine health monitoring. These techniques include support vector machine, deep leaning neural network, etc. The inner ring defect and misalignment anomaly sound data measured by a rotating machine mockup test facility are used to verify the above various kinds of algorithms. Although we cannot find remarkable difference of anomaly discrimination performance, some methods give us the very interesting eigen patterns corresponding to normal and abnormal states. These results will be useful for future more sensitive and robust anomaly monitoring technology.

Advanced Machine learning Algorithm Application for Rotating Machine Health Monitoring

International Nuclear Information System (INIS)

Kanemoto, Shigeru; Watanabe, Masaya; Yusa, Noritaka

2014-01-01

The present paper tries to evaluate the applicability of conventional sound analysis techniques and modern machine learning algorithms to rotating machine health monitoring. These techniques include support vector machine, deep leaning neural network, etc. The inner ring defect and misalignment anomaly sound data measured by a rotating machine mockup test facility are used to verify the above various kinds of algorithms. Although we cannot find remarkable difference of anomaly discrimination performance, some methods give us the very interesting eigen patterns corresponding to normal and abnormal states. These results will be useful for future more sensitive and robust anomaly monitoring technology

Negotiating Lean

DEFF Research Database (Denmark)

Rahbek Pedersen, Esben; Muniche, Mahad

2011-01-01

Purpose – The purpose of this paper is to analyse how negotiations between the constituencies affect the processes and outcomes of lean projects in Danish public sector organisations. Design/methodology/approach – The paper is based on a qualitative analysis of interviews with managers...... projects in the Danish public sector. It cannot be concluded that the findings can be generalised to reflect all types of lean projects across organisational and geographical settings. Originality/value – The paper adds value to the relatively scarce literature on lean management in the public sector...... and employees who have participated in lean projects in the Danish public sector. Negotiated order theory serves as the overarching theoretical framework for the analysis. Findings – The paper concludes that the processes and outcomes of lean depend not only on the technology itself, but also the negotiation...

Simulation guided value stream mapping and lean improvement: A case study of a tubular machining facility

Directory of Open Access Journals (Sweden)

Wei Xia

2013-06-01

Full Text Available Purpose: This paper describes a typical Value stream mapping (VSM application enhanced by the discrete event simulation (DES to a dedicated tubular manufacturing process. Design/Methodology/Approach: VSM is prescribed as part of lean production portfolio of tools, not only highlights process inefficiencies, transactional and communication mismatches, but also guides improvement areas. Meanwhile, DES is used to reduce uncertainty and create consensus by visualizing dynamic process views. It is served as a complementary tool for the traditional VSM to provide sufficient justification and quantifiable evidence needed to convince the lean approaches. A simulation model is developed to replicate the operation of an existing system, and that of a proposed system that modifies the existing design to incorporate lean manufacturing shop floor principles. Findings: A comprehensive model for the tubular manufacturing process is constructed, and distinctive scenarios are derived to uncover an optimal future state of the process. Various simulation scenarios are developed. The simulated results are acquired and investigated, and they are well matched with the real production data. Originality/Value: DES is demonstrated as a guided tool to assist organizations with the decision to implement lean approaches by quantifying benefits from applying the VSM. A roadmap is provided to illustrate how the VSM is used to design a desired future state. The developed simulation scenarios mimic the behavior of the actual manufacturing process in an intuitive manner.

Earnings management and Stock Market Return: An Investigation of Lean against the Wind Hypothesis

Directory of Open Access Journals (Sweden)

Amir Sajjad Khan

2013-09-01

Full Text Available This study attempts to investigate the “lean against the wind hypothesis”. For this purpose the relationship of earnings management to that of the aggregate stock market return was investigated. Data for the year 2005 to 2009 was examined and Panel Data techniques were applied on the data set. F-statistics were used to check for appropriateness of the model, Housman test were used to finally decide for fixed effect model. Results of the paper were against the existence of lean against the wind behavior of the firms towards the aggregate under valuation of stock market returns. These Results were in favor of the past study of Cohen and Zarowin (2011.Keywords: Earnings management, Discretionary accruals, Modified Jones model, KSE

Managing paradoxical tensions during the implementation of Lean capabilities for improvement

DEFF Research Database (Denmark)

Maalouf, Malek Miguel; Gammelgaard, Britta

2016-01-01

Purpose: – Through the identification and investigation of the organisational paradoxes in lean, the purpose of this paper is to deepen the understanding of lean implementation intricacies, and contribute to sustaining lean in companies. Design/methodology/approach: – Case study based on semi...... also points to a range managerial responses used for dealing with the three paradoxes and facilitating lean transformation. Research limitations/implications: – This is a theory development paper which increases the understanding regarding the role of the organisational paradoxes in facilitating...

Lean leadership: an ethnographic study.

Science.gov (United States)

Aij, Kjeld Harald; Visse, Merel; Widdershoven, Guy A M

2015-01-01

The purpose of this study is to provide a critical analysis of contemporary Lean leadership in the context of a healthcare practice. The Lean leadership model supports professionals with a leading role in implementing Lean. This article presents a case study focusing specifically on leadership behaviours and issues that were experienced, observed and reported in a Dutch university medical centre. This ethnographic case study provides auto-ethnographic accounts based on experiences, participant observation, interviews and document analysis. Characteristics of Lean leadership were identified to establish an understanding of how to achieve successful Lean transformation. This study emphasizes the importance for Lean leaders to go to the gemba, to see the situation for one's own self, empower health-care employees and be modest. All of these are critical attributes in defining the Lean leadership mindset. In this case study, Lean leadership is specifically related to healthcare, but certain common leadership characteristics are relevant across all fields. This article shows the value of an auto-ethnographic view on management learning for the analysis of Lean leadership. The knowledge acquired through this research is based on the first author's experiences in fulfilling his role as a health-care leader. This may help the reader examining his/her own role and reflecting on what matters most in the field of Lean leadership.

Efficacy of Nanocutting Fluids in Machining-an Experimental Investigation

Directory of Open Access Journals (Sweden)

Vamsi Krishna Pasam

2018-01-01

Full Text Available This paper presents the experimental investigations on the performance of eco-friendly vegetable oil based nanofluids in turning operation. In order to assess the quality of nano cutting fluids used during machining, cutting temperatures, cutting forces, tool wear and surface roughness under constant cutting conditions are measured. The influence of two types of nanofluids prepared from nano boric acid (NBA and carbon nanotubes (CNT mixed separately with coconut oil (CC, on machining performance during turning operation is examined. Comparative analysis of the results obtained is done under dry, soluble oil (SL and lubricant environments at constant cutting conditions and 0.25% nano particle inclusions (NPI. To understand the influence of NPI experiments were conducted using CCNBA and CCCNT at varying NPI as well. Results obtained using cutting fluids prepared from vegetable oil based nanofluids are encouraging and more pronouncing by the application of CCCNT at machining zone. The extent of improvement in reduction of cutting temperatures, main cutting force, tool wear and surface roughness is tracked to be 13%, 37.5%, 44% and 40% respectively by the application of CCCNT compared to dry machining. It was found that application of CCNBA and CCCNT at 0.5% NPI is more effective in improving the machining performance.

Machinability of nickel based alloys using electrical discharge machining process

Science.gov (United States)

Khan, M. Adam; Gokul, A. K.; Bharani Dharan, M. P.; Jeevakarthikeyan, R. V. S.; Uthayakumar, M.; Thirumalai Kumaran, S.; Duraiselvam, M.

2018-04-01

The high temperature materials such as nickel based alloys and austenitic steel are frequently used for manufacturing critical aero engine turbine components. Literature on conventional and unconventional machining of steel materials is abundant over the past three decades. However the machining studies on superalloy is still a challenging task due to its inherent property and quality. Thus this material is difficult to be cut in conventional processes. Study on unconventional machining process for nickel alloys is focused in this proposed research. Inconel718 and Monel 400 are the two different candidate materials used for electrical discharge machining (EDM) process. Investigation is to prepare a blind hole using copper electrode of 6mm diameter. Electrical parameters are varied to produce plasma spark for diffusion process and machining time is made constant to calculate the experimental results of both the material. Influence of process parameters on tool wear mechanism and material removal are considered from the proposed experimental design. While machining the tool has prone to discharge more materials due to production of high energy plasma spark and eddy current effect. The surface morphology of the machined surface were observed with high resolution FE SEM. Fused electrode found to be a spherical structure over the machined surface as clumps. Surface roughness were also measured with surface profile using profilometer. It is confirmed that there is no deviation and precise roundness of drilling is maintained.

Antecedents and characteristics of lean thinking implementation in a Swedish hospital: a case study.

Science.gov (United States)

Ulhassan, Waqar; Sandahl, Christer; Westerlund, Hugo; Henriksson, Peter; Bennermo, Marie; von Thiele Schwarz, Ulrica; Thor, Johan

2013-01-01

Despite the reported success of Lean in health care settings, it is unclear why and how organizations adopt Lean and how Lean transforms work design and, in turn, affects employees' work. This study investigated a cardiology department's journey to adopt and adapt Lean. The investigation was focused on the rationale and evolution of the Lean adoption to illuminate how a department with a long quality improvement history arrived at the decision to introduce Lean, and how Lean influenced employees' daily work. This is an explanatory single case study based on semistructured interviews, nonparticipant observations, and document studies. Guided by a Lean model, we undertook manifest content analysis of the data. We found that previous improvement efforts may facilitate the introduction of Lean but may be less important when forecasting whether Lean will be sustained over time. Contextual factors seemed to influence both what Lean tools were implemented and how well the changes were sustained. For example, adoption of Lean varied with the degree to which staff saw a need for change. Work redesign and teamwork were found helpful to improve patient care whereas problem solving was found helpful in keeping the staff engaged and sustaining the results over time.

TOWARDS GREEN THROUGH LEAN/LEAN SIX SIGMA APPROACHES: A LITERATURE REVIEW AT SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

RODRIGO GOYANNES GUSMÃO CAIADO

2017-08-01

Full Text Available In the last decades, sustainable development have increasingly gained importance to service industry and lean/Six Sigma approaches are becoming more and more outstanding in order to improve sustainability performance. In the post-modern era the integration between those approaches are necessary in order to aid organisations to balance the need for operational efficiency in their production and service systems with environmental commitment and social fairness. Because of that, Lean Six Sigma practices are progressively becoming widespread in studies about service, as way to improve quality, efficiency, effectiveness and sustainability of services. The purpose of this paper is to critically review the Lean and Lean Six Sigma (L6σ methodologies and highlight their importance to achieve sustainable development in service industry. To do this, a systematic literature review (SLR of the subjects under investigation was conducted. We examine the compatibility and divergences of the green, lean and Six Sigma concepts and implications regarding its sustainable implementation in service industry. The study has two major contributions. First, it is one of the first researches that investigate the potential benefits of integrating green, lean and Six Sigma in service sector. Second, it supports and expands current literature, providing both academicians and practitioners a better panorama to understand the present status of L6σ for achieving sustainability in service sector.

Orchestrating Lean Implementation

DEFF Research Database (Denmark)

Riis, Jens Ove; Mikkelsen, Hans; Andersen, Jesper Rank

2008-01-01

The notion of Lean Manufacturing is not merely confined to a set of well defined techniques, but represents a broad approach to managing a company. Working with lean entails many aspects, such as production planning and control, production engineering, product development, supply chain......, and organizational issues. To become effective, many functional areas and departments must be involved. At the same time companies are embedded in a dynamic environment. The aim of the paper is to propose a comprehensive approach to better implementation of lean initiatives, based on two empirical studies. The paper...... will discuss how a concerted effort can be staged taking into account the interdependencies among individual improvement initiatives. The notion of orchestration will be introduced, and several means for orchestration will be presented. Critical behavioral issues for lean implementation will be discussed....

DNA-based machines.

Science.gov (United States)

Wang, Fuan; Willner, Bilha; Willner, Itamar

2014-01-01

The base sequence in nucleic acids encodes substantial structural and functional information into the biopolymer. This encoded information provides the basis for the tailoring and assembly of DNA machines. A DNA machine is defined as a molecular device that exhibits the following fundamental features. (1) It performs a fuel-driven mechanical process that mimics macroscopic machines. (2) The mechanical process requires an energy input, "fuel." (3) The mechanical operation is accompanied by an energy consumption process that leads to "waste products." (4) The cyclic operation of the DNA devices, involves the use of "fuel" and "anti-fuel" ingredients. A variety of DNA-based machines are described, including the construction of "tweezers," "walkers," "robots," "cranes," "transporters," "springs," "gears," and interlocked cyclic DNA structures acting as reconfigurable catenanes, rotaxanes, and rotors. Different "fuels", such as nucleic acid strands, pH (H⁺/OH⁻), metal ions, and light, are used to trigger the mechanical functions of the DNA devices. The operation of the devices in solution and on surfaces is described, and a variety of optical, electrical, and photoelectrochemical methods to follow the operations of the DNA machines are presented. We further address the possible applications of DNA machines and the future perspectives of molecular DNA devices. These include the application of DNA machines as functional structures for the construction of logic gates and computing, for the programmed organization of metallic nanoparticle structures and the control of plasmonic properties, and for controlling chemical transformations by DNA machines. We further discuss the future applications of DNA machines for intracellular sensing, controlling intracellular metabolic pathways, and the use of the functional nanostructures for drug delivery and medical applications.

Investigation of the Machining Stability of a Milling Machine with Hybrid Guideway Systems

Directory of Open Access Journals (Sweden)

Jui-Pin Hung

2016-03-01

Full Text Available This study was aimed to investigate the machining stability of a horizontal milling machine with hybrid guideway systems by finite element method. To this purpose, we first created finite element model of the milling machine with the introduction of the contact stiffness defined at the sliding and rolling interfaces, respectively. Also, the motorized built-in spindle model was created and implemented in the whole machine model. Results of finite element simulations reveal that linear guides with different preloads greatly affect the dynamic responses and machining stability of the horizontal milling machine. The critical cutting depth predicted at the vibration mode associated with the machine tool structure is about 10 mm and 25 mm in the X and Y direction, respectively, while the cutting depth predicted at the vibration mode associated with the spindle structure is about 6.0 mm. Also, the machining stability can be increased when the preload of linear roller guides of the feeding mechanism is changed from lower to higher amount.

Lean Manufacturing, Mass Customization and their relationships - empirical findings

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

2004-01-01

manufacturing companies in 2001-02. This study fills a void in existing research by exploring relationships between bundles of lean manufacturing practices and bundles of mass customization practices. This study is based on a questionnaire that is developed from two existing questionnaires each investigating...... bundles of lean manufacturing practices and bundles of mass customization practices separately. Here, these bundles of practices are related. The results indicate that there are no direct relationships between the lean manufacturing and the mass customization practices, but that the combination of some...... sets of practices can explain differences in performance on important dimensions. The general conclusion, however, is that there are only weak relationships between the two concepts, hence this study suggests that the concepts of lean manufacturing and mass customization at present are more mutually...

“Investigations on the machinability of Waspaloy under dry environment”

Science.gov (United States)

Deepu, J.; Kuppan, P.; SBalan, A. S.; Oyyaravelu, R.

2016-09-01

Nickel based superalloy, Waspaloy is extensively used in gas turbine, aerospace and automobile industries because of their unique combination of properties like high strength at elevated temperatures, resistance to chemical degradation and excellent wear resistance in many hostile environments. It is considered as one of the difficult to machine superalloy due to excessive tool wear and poor surface finish. The present paper is an attempt for removing cutting fluids from turning process of Waspaloy and to make the processes environmentally safe. For this purpose, the effect of machining parameters such as cutting speed and feed rate on the cutting force, cutting temperature, surface finish and tool wear were investigated barrier. Consequently, the strength and tool wear resistance and tool life increased significantly. Response Surface Methodology (RSM) has been used for developing and analyzing a mathematical model which describes the relationship between machining parameters and output variables. Subsequently ANOVA was used to check the adequacy of the regression model as well as each machining variables. The optimal cutting parameters were determined based on multi-response optimizations by composite desirability approach in order to minimize cutting force, average surface roughness and maximum flank wear. The results obtained from the experiments shown that machining of Waspaloy using coated carbide tool with special ranges of parameters, cutting fluid could be completely removed from machining process

Experimental Investigation – Magnetic Assisted Electro Discharge Machining

Science.gov (United States)

Kesava Reddy, Chirra; Manzoor Hussain, M.; Satyanarayana, S.; Krishna, M. V. S. Murali

2018-04-01

Emerging technology needs advanced machined parts with high strength and temperature resistance, high fatigue life at low production cost with good surface quality to fit into various industrial applications. Electro discharge machine is one of the extensively used machines to manufacture advanced machined parts which cannot be machined by other traditional machine with high precision and accuracy. Machining of DIN 17350-1.2080 (High Carbon High Chromium steel), using electro discharge machining has been discussed in this paper. In the present investigation an effort is made to use permanent magnet at various positions near the spark zone to improve surface quality of the machined surface. Taguchi methodology is used to obtain optimal choice for each machining parameter such as peak current, pulse duration, gap voltage and Servo reference voltage etc. Process parameters have significant influence on machining characteristics and surface finish. Improvement in surface finish is observed when process parameters are set at optimum condition under the influence of magnetic field at various positions.

Applying lean thinking in construction

Directory of Open Access Journals (Sweden)

Remon Fayek Aziz

2013-12-01

Full Text Available The productivity of the construction industry worldwide has been declining over the past 40 years. One approach for improving the situation is using lean construction. Lean construction results from the application of a new form of production management to construction. Essential features of lean construction include a clear set of objectives for the delivery process, aimed at maximizing performance for the customer at the project level, concurrent design, construction, and the application of project control throughout the life cycle of the project from design to delivery. An increasing number of construction academics and professionals have been storming the ramparts of conventional construction management in an effort to deliver better value to owners while making real profits. As a result, lean-based tools have emerged and have been successfully applied to simple and complex construction projects. In general, lean construction projects are easier to manage, safer, completed sooner, and cost less and are of better quality. Significant research remains to complete the translation to construction of lean thinking in Egypt. This research will discuss principles, methods, and implementation phases of lean construction showing the waste in construction and how it could be minimized. The Last Planner System technique, which is an important application of the lean construction concepts and methodologies and is more prevalent, proved that it could enhance the construction management practices in various aspects. Also, it is intended to develop methodology for process evaluation and define areas for improvement based on lean approach principles.

Lean energy analysis of CNC lathe

Science.gov (United States)

Liana, N. A.; Amsyar, N.; Hilmy, I.; Yusof, MD

2018-01-01

The industrial sector in Malaysia is one of the main sectors that have high percentage of energy demand compared to other sector and this problem may lead to the future power shortage and increasing the production cost of a company. Suitable initiatives should be implemented by the industrial sectors to solve the issues such as by improving the machining system. In the past, the majority of the energy consumption in industry focus on lighting, HVAC and office section usage. Future trend, manufacturing process is also considered to be included in the energy analysis. A study on Lean Energy Analysis in a machining process is presented. Improving the energy efficiency in a lathe machine by enhancing the cutting parameters of turning process is discussed. Energy consumption of a lathe machine was analyzed in order to identify the effect of cutting parameters towards energy consumption. It was found that the combination of parameters for third run (spindle speed: 1065 rpm, depth of cut: 1.5 mm, feed rate: 0.3 mm/rev) was the most preferred and ideal to be used during the turning machining process as it consumed less energy usage.

Researching Lean: Methodological Implications of Loose Definitions

Directory of Open Access Journals (Sweden)

Mikael Brännmark

2012-12-01

Full Text Available Recently, Lean Production (Lean has become a prevailing management concept in Sweden. However, previous research seems to show that the Lean concept and the impact of Lean vary considerably between organizations. This paper illustrates some key methodological issues that need to be considered when researching loosely defined management concepts such as Lean. The paper is based on a review of the literature and five comparative Swedish cases studies. Our study indicates that Lean has changed over time and that operationalization and interpretations of the concept vary considerably. This study concludes that future Lean studies should include a thorough assessment of the Lean interventions, study settings, and in particular non-Lean factors mediating the outcomes of Lean-inspired change programs.

Investigation of the prominent barriers to lean manufacturing implementation in Malaysian food and beverages industry using Rasch Model

Science.gov (United States)

Khusaini, N. S.; Ismail, A.; Rashid, A. A.

2016-02-01

This paper presents a preliminary study on the prominent barriers to lean manufacturing implementation in Malaysian Food and Beverages Industry. A survey was carried out to determine the most prominent barriers of lean manufacturing implementation that are currently being faced in this industry. The amount of barriers identified for this study is twenty seven. Out of 1309 available organizations, a total of 300 organizations have been randomly selected as respondents, and 53 organizations responded. From the variable map, the analysis shows that, the negative perception towards lean manufacturing top the list as the most agreeable barrier, while the technical barriers came after it. It can also be seen from the variable map that averagely, lack of vision and direction is the barrier that is being faced. Finally, this is perhaps the first attempt in investigating the prominent barriers to Lean Manufacturing implementation in Malaysian food and beverages industry using Rasch Model.

PRIORITISING LEAN CONSTRUCTION BARRIERS IN UGANDA'S CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Henry Mwanaki Alinaitwe

2009-06-01

Full Text Available Engaging in lean construction efforts could prove to be highly rewarding for building firms in Uganda. However, lean construction is risky and can be disastrous if not properly managed. Lean production efforts in some other countries have not been successful due to the many barriers to its successful implementation. To enable sound lean construction efforts and to increase the chances of success in eliminating waste, a thorough investigation of the barriers is essential. This study presents 31 barriers and investigates their influence (strength on the success of lean construction initiatives. Structured interviews were carried out with technical managers of building firms to assess their perception of the barriers to lean production based on their experience at their firms. The strongest barrier is the provision of inputs exactly when required. Additionally, the barriers were ranked according to the ease of overcoming each. The easiest barrier to overcome is keeping the required items in the right place. Finally, a graphical aid is provided to enable decision makers to concentrate their efforts on the influential (strong, yet easy to overcome barriers. A lack of buildable designs and a participative management style for the workforce are the most important barriers to successful waste reduction in terms of strength and ease of overcoming. On the other hand, a lack of an organisational culture that supports teamwork, a lack of prefabrication and a lack of knowledgeable and skilled workers are regarded as low in strength, and at the same time difficult to overcome.

Investigation of permanent magnet machines for downhole applications: Design, prototype and testing of a flux-switching permanent magnet machine

Energy Technology Data Exchange (ETDEWEB)

Chen, Anyuan

2011-01-15

downhole applications. Flux-switching PM (FSPM) machines, which have the PMs located on the stator and are therefore more reliable, can theoretically also exhibit high torque density and relatively high efficiency. This thesis has put an emphasis on studying this type of machine. Two FSPM machines have been investigated in detail and compared by analytical method, FEM simulation and prototype measurements. Their operating principle and important design parameters are also presented. A lumped parameter magnetic circuit model for designing a high-torque FSPM machine is newly introduced and the designed machine is verified by FEM simulations. A prototype machine with an outer diameter of 100 mm and an axial length of 200 mm is built in the laboratory and tested at room temperature. Based on that, the machine performance at an ambient temperature of 150 C is also predicted. The results show that the FSPM machine can provide a high torque density with slight compromise of efficiency and power factor. Choosing a proper machine type is significantly dependent on the application specifications. The presented results in this thesis can be used as a reference for selecting the best machine type for a specific downhole case. (Author)

Investigation of low emission combustors using hydrogen lean direct injection

Directory of Open Access Journals (Sweden)

Robert ISAC

2011-09-01

Full Text Available One of the key technology challenges for the use of hydrogen in gas turbine engines is the performance of the combustion system, in particular the fuel injectors. Tests were conducted to measure the nitrogen oxide (NOx emissions and combustion performance at inlet conditions of 588 to 811 K, 0.4 to 1.4 MPa, and equivalence ratios up to 0.48. All the injectors were based on Lean Direct Injection (LDI technology with multiple injection points and quick mixing. One challenge to hydrogen-based premixing combustion systems is flashback since hydrogen has a reaction rate over 7 times that of Jet-A.

The Role of Lean Process Improvement in Implementation of Evidence-Based Practices in Behavioral Health Care.

Science.gov (United States)

Steinfeld, Bradley; Scott, Jennifer; Vilander, Gavin; Marx, Larry; Quirk, Michael; Lindberg, Julie; Koerner, Kelly

2015-10-01

To effectively implement evidence-based practices (EBP) in behavioral health care, an organization needs to have operating structures and processes that can address core EBP implementation factors and stages. Lean, a widely used quality improvement process, can potentially address the factors crucial to successful implementation of EBP. This article provides an overview of Lean and the relationship between Lean process improvement steps, and EBP implementation models. Examples of how Lean process improvement methodologies can be used to help plan and carry out implementation of EBP in mental health delivery systems are presented along with limitations and recommendations for future research and clinical application.

Exploiting HRM in support of lean manufacturing

DEFF Research Database (Denmark)

Jørgensen, Frances; Matthiesen, Rikke

The purpose of this paper is to investigate the ways in HRM practices are-and could potentially be-exploited to support lean manufacturing in practice. First, a review of the pertinent literature regarding HRM, SHRM, and lean manufacturing is presented to provide an understanding of the mechanisms...... by which HRM practices could, theoretically, be used to support a lean implementation. Data presented in the paper are derived from 1) a longitudinal case study on lean implementation and 2) from managers currently involved with lean manufacturing in a second company. The relevant literature and the data...... depicting the potential role in supporting HRM/lean integrated practices. The analysis of the model with respect to the theoretical background emphasizes a number of areas in which HRM could be more fully exploited in order to more successfully support lean implementation, for example, by stressing HRM...

Investigation of support vector machine for the detection of architectural distortion in mammographic images

International Nuclear Information System (INIS)

Guo, Q; Shao, J; Ruiz, V

2005-01-01

This paper investigates detection of architectural distortion in mammographic images using support vector machine. Hausdorff dimension is used to characterise the texture feature of mammographic images. Support vector machine, a learning machine based on statistical learning theory, is trained through supervised learning to detect architectural distortion. Compared to the Radial Basis Function neural networks, SVM produced more accurate classification results in distinguishing architectural distortion abnormality from normal breast parenchyma

Investigation of support vector machine for the detection of architectural distortion in mammographic images

Energy Technology Data Exchange (ETDEWEB)

Guo, Q [Department of Cybernetics, University of Reading, Reading RG6 6AY (United Kingdom); Shao, J [Department of Electronics, University of Kent at Canterbury, Kent CT2 7NT (United Kingdom); Ruiz, V [Department of Cybernetics, University of Reading, Reading RG6 6AY (United Kingdom)

2005-01-01

This paper investigates detection of architectural distortion in mammographic images using support vector machine. Hausdorff dimension is used to characterise the texture feature of mammographic images. Support vector machine, a learning machine based on statistical learning theory, is trained through supervised learning to detect architectural distortion. Compared to the Radial Basis Function neural networks, SVM produced more accurate classification results in distinguishing architectural distortion abnormality from normal breast parenchyma.

Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

Directory of Open Access Journals (Sweden)

Ming Cheng

2015-09-01

Full Text Available The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs. Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator permanent magnet (stator-PM motor, a hybrid-excitation motor, a flux memory motor and a redundant motor structure. Then, it illustrates advanced electric drive systems, such as the magnetic-geared in-wheel drive and the integrated starter generator (ISG. Finally, three machine-based implementations of the power split devices are expounded, built up around the dual-rotor PM machine, the dual-stator PM brushless machine and the magnetic-geared dual-rotor machine. As a conclusion, the development trends in the field of electric machines and machine-based systems for EVs are summarized.

Detection of Watermelon Seeds Exterior Quality based on Machine Vision

OpenAIRE

Xiai Chen; Ling Wang; Wenquan Chen; Yanfeng Gao

2013-01-01

To investigate the detection of watermelon seeds exterior quality, a machine vision system based on least square support vector machine was developed. Appearance characteristics of watermelon seeds included area, perimeter, roughness, minimum enclosing rectangle and solidity were calculated by image analysis after image preprocess.The broken seeds, normal seeds and high-quality seeds were distinguished by least square support vector machine optimized by genetic algorithm. Compared to the grid...

The Role of The Executive in Lean: A Qualitative Thesis Based

OpenAIRE

P. Marksberry; S. Hughes

2011-01-01

Lean manufacturing (Lean), as evolved from the Toyota Production System (TPS), has gained traction in many businesses as a tool for efficiency and improvement. However, the role of an executive or general manager within a Lean organization has not been clearly articulated in any official or proven way. This research looks at common approaches, theories, and problems concerning the role of the executive and how it can affect companies in their efforts to adopt Lean tools and principles. This r...

Lean thinking for a maintenance process

Directory of Open Access Journals (Sweden)

Sherif Mostafa

2015-01-01

Full Text Available The maintenance process shares significant operating costs in an organisation. Lean thinking can be incorporated into maintenance activities through applying its principles and practices/tools. Lean maintenance (LM is a prerequisite for lean manufacturing systems. This research proposes a new structure for LM process based on a systematic literature review of a significant number of related articles that were published on LM. The process structure is designed based on the five lean principles to guide and support organisations to pursue maintenance excellence. This study establishes a scheme for LM tools that are structured into 2 level 4 bundles and 26 lean practices/tools and develops a House of Waste (HoW to demonstrate the association between maintenance wastes and the LM tools. With a successful accomplishment of the proposed scheme, the performance of a maintenance department can create more improvement opportunities over time to reach the maintenance excellence status.

Model-based machine learning.

Science.gov (United States)

Bishop, Christopher M

2013-02-13

Several decades of research in the field of machine learning have resulted in a multitude of different algorithms for solving a broad range of problems. To tackle a new application, a researcher typically tries to map their problem onto one of these existing methods, often influenced by their familiarity with specific algorithms and by the availability of corresponding software implementations. In this study, we describe an alternative methodology for applying machine learning, in which a bespoke solution is formulated for each new application. The solution is expressed through a compact modelling language, and the corresponding custom machine learning code is then generated automatically. This model-based approach offers several major advantages, including the opportunity to create highly tailored models for specific scenarios, as well as rapid prototyping and comparison of a range of alternative models. Furthermore, newcomers to the field of machine learning do not have to learn about the huge range of traditional methods, but instead can focus their attention on understanding a single modelling environment. In this study, we show how probabilistic graphical models, coupled with efficient inference algorithms, provide a very flexible foundation for model-based machine learning, and we outline a large-scale commercial application of this framework involving tens of millions of users. We also describe the concept of probabilistic programming as a powerful software environment for model-based machine learning, and we discuss a specific probabilistic programming language called Infer.NET, which has been widely used in practical applications.

TQM and lean strategy deployment in Italian hospitals.

Science.gov (United States)

Chiarini, Andrea; Baccarani, Claudio

2016-10-03

Purpose This paper aims to contribute to the debate concerning total quality management (TQM)-Lean strategy in public healthcare by analyzing the deployment path for implementation, the possible benefits that can be achieved and the encountered pitfalls. Design/methodology/approach Three case studies are drawn from three large Italian hospitals with more than 500 beds each and structured with many departments. The hospitals are located in Tuscany, Italy. These three hospitals have embraced TQM and Lean, starting from strategic objectives and their deployment. At the same time, they have also implemented many TQM-Lean tools. The case studies are based on interviews held with four managers in each of these three public hospitals. Findings Results from the interviews show that there is a specific deployment path for TQM-Lean implementation. The hospitals have also achieved benefits linked to patient satisfaction and improved organizational performances. Problems related to organizational and cultural issues, such as senior managers' commitment, staff management, manufacturing culture and tools adaptation, could affect the benefits. Research limitations/implications The research has been carried out in just three Italian public hospitals. Hence, similar investigations could be managed in other countries. Researchers could also use a larger sample and investigate these issues by means of quantitative inquiry. Practical implications Practitioners could try to apply the deployment path revealed by these case studies in other public and private hospitals. Originality/value The results of this research show that there is a specific, new deployment path for implementing TQM-Lean strategy in some public hospitals.

Rainfall Prediction of Indian Peninsula: Comparison of Time Series Based Approach and Predictor Based Approach using Machine Learning Techniques

Science.gov (United States)

Dash, Y.; Mishra, S. K.; Panigrahi, B. K.

2017-12-01

Prediction of northeast/post monsoon rainfall which occur during October, November and December (OND) over Indian peninsula is a challenging task due to the dynamic nature of uncertain chaotic climate. It is imperative to elucidate this issue by examining performance of different machine leaning (ML) approaches. The prime objective of this research is to compare between a) statistical prediction using historical rainfall observations and global atmosphere-ocean predictors like Sea Surface Temperature (SST) and Sea Level Pressure (SLP) and b) empirical prediction based on a time series analysis of past rainfall data without using any other predictors. Initially, ML techniques have been applied on SST and SLP data (1948-2014) obtained from NCEP/NCAR reanalysis monthly mean provided by the NOAA ESRL PSD. Later, this study investigated the applicability of ML methods using OND rainfall time series for 1948-2014 and forecasted up to 2018. The predicted values of aforementioned methods were verified using observed time series data collected from Indian Institute of Tropical Meteorology and the result revealed good performance of ML algorithms with minimal error scores. Thus, it is found that both statistical and empirical methods are useful for long range climatic projections.

An investigative study towards constructing anthropocentric Man-Machine System design evaluation methodology

International Nuclear Information System (INIS)

Yoshikawa, H.; Gofuku, A.; Itoh, T.; Sasaki, K.

1992-01-01

A methodological investigation has been conducted for evaluating the reliability of man-machine interaction in the total Man-Machine System (MMS) from the view-point of safety maintenance for emergent situations of nuclear power plant. Basic considerations in our study are: (i) what are the MMS design data to be evaluated, (ii) how are those MMS design data should be treated, and (iii) how the introduction effects of various operator support tools can be evaluated. The methods of both qualitative and quantitative MMS design evaluation are summarized in this paper, with the system architecture based on man-machine interaction simulation and the related cognitive human error factor analysis. (author)

IoT Security Techniques Based on Machine Learning

OpenAIRE

Xiao, Liang; Wan, Xiaoyue; Lu, Xiaozhen; Zhang, Yanyong; Wu, Di

2018-01-01

Internet of things (IoT) that integrate a variety of devices into networks to provide advanced and intelligent services have to protect user privacy and address attacks such as spoofing attacks, denial of service attacks, jamming and eavesdropping. In this article, we investigate the attack model for IoT systems, and review the IoT security solutions based on machine learning techniques including supervised learning, unsupervised learning and reinforcement learning. We focus on the machine le...

Researching Lean: Methodological implications of loose definitions

DEFF Research Database (Denmark)

Brännmark, Mikael; Langstrand, Jostein; Johansson, Stina

2012-01-01

practices seem to overlap with other popular management concepts, such as High Performance Work Systems, World Class Manufacturing and Total Quality Management. This confusion, combined with different methodological and theoretical traditions, has led to much debate and contradictory conclusions regarding...... Lean. The purpose of the paper is to illustrate some key methodological issues that need to be considered in future Lean research to allow increased understanding of Lean effects for different stakeholders, primarily meaning the customer, employer and employees. Design/methodology/approach – The paper...... on the case studies, we suggest that future investigations describe the Lean interventions in more detail. General descriptions or analogies, e.g. ‘learning organizations’, presumably increase the present confusion regarding Lean impact on different stakeholders. The case studies also illustrate...

Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

Directory of Open Access Journals (Sweden)

Adam Sanders

2016-09-01

Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

Lean manufacturing measurement: the relationship between lean activities and lean metrics

Directory of Open Access Journals (Sweden)

Manotas Duque Diego Fernando

2007-10-01

Full Text Available Lean Manufacturing was developed by Toyota Motor company to address their specific needs in a restricted market in times of economic trouble. These concepts have been studied and proven to be transferrable and applicable to a wide variety of industries. This paper aims to integrate a set of metrics that have been proposed by different authors in such a way that they are consistent with the different stages and elements of Lean Manufacturing implementations. To achieve this, two frameworks for Lean implementations are presented and then the main factors for success are used as the basis to propose metrics that measure the advance in these factors. A tabular display of the impact of “Lean activities” on the metrics is presented, proposing that many a priori assumptions about the benefits on many different levels of improvement should be accurate. Finally, some ideas for future research and extension of the applications proposed on this paper are presented as closing points.

Evaluation of RFID for Information Visibility Based Job-Shop Scheduling in Lean Manufacturing Environments

Science.gov (United States)

Chongwatpol, Jongsawas

2012-01-01

This dissertation investigates the impact of radio frequency identification (RFID) in manufacturing. Two simulation studies of an organization that is considering implementing RFID on a production line are conducted. First, we investigate whether addition of RFID technologies in the manufacturing process can complement Lean initiatives.…

Lean Management Genesis

Directory of Open Access Journals (Sweden)

Parkes Aneta

2015-12-01

Full Text Available Lean Management is a philosophy and management concept, based on reduction of the waste and resources used in the process of producing goods and providing services. Lean Management genesis dates back to scientific management in America (for example concepts of H. Ford and F.W. Taylor and quality management, including development of TQM concept. Japanese Toyota Production System has been inspired by chosen elements of these concepts, and then it evolved towards global concept called Toyota Way (which connects production rules with values and work attitude.

Implementing lean manufacturing system: ISM approach

Directory of Open Access Journals (Sweden)

Naveen Kumar

2013-09-01

Full Text Available Purpose: Lean Manufacturing System has emerged as an important area of research in Indian context. The requirement of Lean Manufacturing has increased due to defects in products (semi finished and finished and subsequent increase in cost. In this context, this study is an attempt to develop a structural model of the variables, important to implement Lean Manufacturing System in Indian automobile industry. Design/Methodology/Approach: Various variables of lean manufacturing system implementation have been identified from literature review and experts’ opinions. Contextual relationship among these identified variables has been set after carrying out brainstorming session. Further, classification of the variables has been carried out based upon the driving power and dependence. In addition to this, a structural model of variables to implement lean concept in Indian automobile industry has also been developed using Interpretive Structural Modeling (ISM technique. Questionnaire based survey has also been conducted to rank these variables. Findings: Eighteen variables have been identified from the literature and subsequent discussions with experts. Out of which, nine variables have been identified as dependent and nine variables have been identified as driver. No variable has been identified as linkage variable and autonomous variable. From the model developed, ‘Relative cost benefits’ has been identified as top level dependent variable and top management commitment as bottom level most independent variable. Research limitations/Implications: The model so developed is a hypothetical model based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation. Practical implication: Clear understanding of interactions among these variables will help organizations to prioritize and manage these variables more effectively and efficiently to draw advantage from lean manufacturing system implementation

Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university

Science.gov (United States)

Azim Khairi, M.; Rahman, Mohamed Abd

2018-01-01

Many academic articles were published in Malaysia promoting the goodness of lean in manufacturing and industrial sectors but less attention was apparently given to the possibility of obtaining the same universal benefits when applying lean in non-manufacturing sectors especially higher education. This study aims to determine the level of lean awareness among a local university’s community taking its Faculty of Engineering (FoE) as the case study. It also seeks to identify typical FoE’s staff perception on lean regarding its benefits and the obstacles in implementing it. A web-based survey using questionnaires was carried out for 215 respondents consisting of academic and administrative staff of the faculty. Statistical Package for the Social Science (SPSS) was used to analyze the survey data collected. A total of 13.95% of respondents returned the forms. Slightly more than half of those responded (56.7%) have encountered some of the lean terms with mean 1.43 and standard deviation 0.504. However, the large amount of standard deviation somewhat indicates that the real level of lean awareness of FoE as a group was low. In terms of lean benefits, reduction of waste was favored (93.3%) by the respondents with mean 0.93 and standard deviation 0.254. For obstacles in implementing lean, lack of knowledge was selected by most respondents (86.7%) to be the major factor with mean 0.87 and standard deviation 0.346. Through the analysis done, the study may conclude that level of lean awareness among the university‘s community was low thus may hinder implementation of lean concept.

Lean versus Quick Response Manufacturing og andre koncepter - er Lean den eneste ene?

DEFF Research Database (Denmark)

Michelsen, Aage U

2005-01-01

Begrebet Lean har gennem de senere år vundet en enorm udbredelse. Antallet af publikationer om Lean har været eksplosivt stigende, og mange virksomheder har gennemført eller gennemfører Lean-projekter. Er Lean et nyt koncept? Er Lean den eneste løsning? Kan Lean kombineres med tankegange og princ...... løsning af en anden produktionsopgave. I fjerde afsnit skitseres kort relationerne mellem Lean og to andre begreber, Six Sigma og TPM, der begge har samme mål som Lean, men forskellige udgangspunkter og forskellige indfaldsvinkler....

Numerical and experimental investigation of NO{sub x} formation in lean premixed combustion of methane

Energy Technology Data Exchange (ETDEWEB)

Bengtsson, K; Benz, P; Marti, T; Schaeren, R; Schlegel, A [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-06-01

A high pressure jet-stirred reactor has been built and employed to investigate NO{sub x} formation in lean premixed combustion of methane/air. Experimental results are compared with numerical predictions using the model of a perfectly stirred reactor and elementary reaction mechanisms. Four reaction mechanisms are considered with respect to NO{sub x} formation. (author) 3 figs., 6 refs.

Lean og arbejdsmiljø

DEFF Research Database (Denmark)

Jensen, Kenneth

Bogen tager udgangspunkt i en undersøgelse af 10 private og offentlige virksomheders erfaringer med lean. Undersøgelsen viser at der ikke findes entydige sammenhænge mellem lean og det psykosociale arbejdsmiljø. Bogen forholder sig til sammenhængen mellem lean og ledelse, lean og medarbejderens...... rolle, lean og lean og forandringsprocessen. Bogen kommer desuden med anbefalinger til hvorledes virksomheden kan gribe dialogen an for at opnå et godt lean forløb der inddrager hensynet til og effekterne af et godt psykosocialt arbejdsmiljø....

MODELING AND INVESTIGATION OF ASYNCHRONOUS TWO-MACHINE SYSTEM MODES

Directory of Open Access Journals (Sweden)

V. S. Safaryan

2014-01-01

Full Text Available The paper considers stationary and transient processes of an asynchronous two-machine system. A mathematical model for investigation of stationary and transient modes, static characteristics and research results of dynamic process pertaining to starting-up the asynchronous two-machine system has been given in paper.

Teaching Special Decisions in a Lean Accounting Environment

Science.gov (United States)

Haskin, Daniel

2010-01-01

Lean accounting has become increasingly important as more and more companies adopt the lean enterprise model or some variation of it. Cost and managerial accounting textbooks continue to use, almost exclusively, models based on standard overhead absorption, which if used in a lean environment will not accurately reflect the benefits from the…

Investigation of tool engagement and cutting performance in machining a pocket

Science.gov (United States)

Adesta, E. Y. T.; Hamidon, R.; Riza, M.; Alrashidi, R. F. F. A.; Alazemi, A. F. F. S.

2018-01-01

This study investigates the variation of tool engagement for different profile of cutting. In addition, behavior of cutting force and cutting temperature for different tool engagements for machining a pocket also been explored. Initially, simple tool engagement models were developed for peripheral and slot cutting for different types of corner. Based on these models, the tool engagements for contour and zig zag tool path strategies for a rectangular shape pocket with dimension 80 mm x 60 mm were analyzed. Experiments were conducted to investigate the effect of tool engagements on cutting force and cutting temperature for the machining of a pocket of AISI H13 material. The cutting parameters used were 150m/min cutting speed, 0.05mm/tooth feed, and 0.1mm depth of cut. Based on the results obtained, the changes of cutting force and cutting temperature performance there exist a relationship between cutting force, cutting temperature and tool engagement. A higher cutting force and cutting temperature is obtained when the cutting tool goes through up milling and when the cutting tool makes a full engagement with the workpiece.

Lean practices for quality results: a case illustration.

Science.gov (United States)

Hwang, Pauline; Hwang, David; Hong, Paul

2014-01-01

Increasingly, healthcare providers are implementing lean practices to achieve quality results. Implementing lean healthcare practices is unique compared to manufacturing and other service industries. The purpose of this paper is to present a model that identifies and defines the lean implementation key success factors in healthcare organisations. The model is based on an extant literature review and a case illustration that explores actual lean implementation in a major USA hospital located in a Midwestern city (approximately 300,000 people). An exploratory/descriptive study using observation and follow-up interviews was conducted to identify lean practices in the hospital. Lean practice key drivers include growing elderly populations, rising medical expenses, decreasing insurance coverage and decreasing management support. Effectively implementing lean practices to increase bottom-line results and improve organisational integrity requires sharing goals and processes among healthcare managers and professionals. An illustration explains the model and the study provides a sound foundation for empirical work. Practical implications are included. Lean practices minimise waste and unnecessary hospital stays while simultaneously enhancing customer values and deploying resources in supply systems. Leadership requires clear project targets based on sound front-end planning because initial implementation steps involve uncertainty and ambiguity (i.e. fuzzy front-end planning). Since top management support is crucial for implementing lean practices successfully, a heavyweight manager, who communicates well both with top managers and project team members, is an important success factor when implementing lean practices. Increasingly, green orientation and sustainability initiatives are phrases that replaced lean practices. Effective results; e.g. waste reduction, employee satisfaction and customer values are applicable to bigger competitive challenges arising both in specific

Cereal based diets modulate some markers of oxidative stress and inflammation in lean and obese Zucker rats

Directory of Open Access Journals (Sweden)

Mano Mark

2011-05-01

Full Text Available Abstract Background The potential of cereals with high antioxidant capacity for reducing oxidative stress and inflammation in obesity is unknown. This study investigated the impact of wheat bran, barley or a control diet (α-cellulose on the development of oxidative stress and inflammation in lean and obese Zucker rats. Methods Seven wk old, lean and obese male Zucker rats (n = 8/group were fed diets that contained wheat bran, barley or α-cellulose (control. After 3 months on these diets, systolic blood pressure was measured and plasma was analysed for glucose, insulin, lipids, oxygen radical absorbance capacity (ORAC, malondialdehyde, glutathione peroxidase and adipokine concentration (leptin, adiponectin, interleukin (IL-1β, IL-6, TNFα, plasminogen activator inhibitor (PAI-1, monocyte chemotactic protein (MCP-1. Adipokine secretion rates from visceral and subcutaneous adipose tissue explants were also determined. Results Obese rats had higher body weight, systolic blood pressure and fasting blood lipids, glucose, insulin, leptin and IL-1β in comparison to lean rats, and these measures were not reduced by consumption of wheat bran or barley based diets. Serum ORAC tended to be higher in obese rats fed wheat bran and barley in comparison to control (p = 0.06. Obese rats had higher plasma malondialdehyde (p Conclusions A 3-month dietary intervention was sufficient for Zucker obese rats to develop oxidative stress and systemic inflammation. Cereal-based diets with moderate and high antioxidant capacity elicited modest improvements in indices of oxidative stress and inflammation.

Learning Lean: A Survey of Industry Lean Needs

Science.gov (United States)

Fliedner, Gene; Mathieson, Kieran

2009-01-01

The authors examined business practitioners' preferences for higher education curricula design in general and for what graduates should know about Lean, or waste-reduction efforts. The authors conducted a Web-based survey and found that practitioners are not as concerned about graduates' possessing specific technical skills as they are about them…

Investigation on the lean combustion performance of a hydrogen-enriched n-butanol engine

International Nuclear Information System (INIS)

Zhang, Bo; Ji, Changwei; Wang, Shuofeng

2017-01-01

Highlights: • H_2 addition avails improving thermal efficiency of n-butanol engines. • Lean burn limit of n-butanol engine is extended by H_2 addition. • H_2 addition shortens the n-butanol engine combustion duration. • HC and CO from the n-butanol engine are decreased by H_2 addition. - Abstract: n-Butanol is a feasible fuel candidate for spark-ignition engines. The current paper carried out an experiment to explore effects of hydrogen addition on further improving the performance of a n-butanol engine under the part load and lean conditions. Within the test, the engine intake pressure and speed were respectively kept at 61.5 kPa and 1400 rpm. The volumetric fractions of hydrogen in the total intake gas (hydrogen + air) were constrained at 0 and 3%, respectively. Under a certain hydrogen blending level, the global excess air ratio of in-cylinder charge which was changed from the stoichiometric to near the lean burn limit was adjusted by varying the n-butanol injection duration. The experimental results confirmed that the brake thermal efficiency was heightened and the lean burn limit was extended after the hydrogen addition. Besides, compared with the pure n-butanol combustion, the hydrogen enrichment enables the engine to gain dropped ignition delay and rapid combustion duration. Moreover, CO and HC from the pure n-butanol engine were reduced by the hydrogen addition. NOx were generally reduced when the excess air ratio was raised. This suggested that NOx from the hydrogen-enriched butanol engine could also be controlled by lean combustion.

Bevezetés a lean menedzsmentbe – a lean stratégiai alapjai = Introduction to lean management – basic strategic elements of lean

OpenAIRE

Losonci, Dávid

2010-01-01

A lean menedzsment az értékteremtő folyamatok stratégiai és operatív szintjének meghatározó formálójává vált az elmúlt évtizedekben. Jelen tanulmány stratégiai nézőpontból tárgyalja a lean menedzsment teljes bevezetését. Részletes áttekintést ad a Womack és Jones (2003) által lefektetett lean alapelvekről. Az operatív teljesítményjavulásból származó vevői értékteremtés mellett foglalkozik a tulajdonosi értékteremtéssel, az MRP és a lean szinergikus összekapcsolásával, valamint a lean ideális ...

A Performance Survey on Stack-based and Register-based Virtual Machines

OpenAIRE

Fang, Ruijie; Liu, Siqi

2016-01-01

Virtual machines have been widely adapted for high-level programming language implementations and for providing a degree of platform neutrality. As the overall use and adaptation of virtual machines grow, the overall performance of virtual machines has become a widely-discussed topic. In this paper, we present a survey on the performance differences of the two most widely adapted types of virtual machines - the stack-based virtual machine and the register-based virtual machine - using various...

Internal lean practitioner's challenges in lean principles ...

African Journals Online (AJOL)

The approach to this paper is to answer the questions such as “how does internal management commitment impact the Lean principles?”, “how does Supply Chain Management practices impact the lean principles?”, “can Supply Chain Management practices be embedded with internal management commitment?

SLAE-CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies.

Science.gov (United States)

Ma, Jing; Wang, Qiang; Zhao, Zhibiao

2017-06-28

In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE-CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE-CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE-CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology.

SLAE–CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies

Science.gov (United States)

Ma, Jing; Wang, Qiang; Zhao, Zhibiao

2017-01-01

In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE–CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE–CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE–CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology. PMID:28657577

Lean in healthcare from employees' perspectives.

Science.gov (United States)

Drotz, Erik; Poksinska, Bozena

2014-01-01

The purpose of this paper is to contribute toward a deeper understanding of the new roles, responsibilities, and job characteristics of employees in Lean healthcare organizations. The paper is based on three cases studies of healthcare organizations that are regarded as successful examples of Lean applications in the healthcare context. Data were collected by methods including interviews, observations, and document studies. The implementation of Lean in healthcare settings has had a great influence on the roles, responsibilities, and job characteristics of the employees. The focus has shifted from healthcare professionals, where clinical autonomy and professional skills have been the guarding principles of patient care, to process improvement and teamwork. Different job characteristics may make it difficult to implement certain Lean practices in healthcare. Teamwork and decentralization of authority are examples of Lean practices that could be considered countercultural because of the strong professional culture and uneven power distribution, with doctors as the dominant decision makers. Teamwork, value flow orientation, and company-wide involvement in CI were associated with positive effects on the organizations' working environment, staff development, and organizational performance. In order to succeed with Lean healthcare, it is important to understand and recognize the differences in job characteristics between Lean manufacturing and healthcare. This paper provides insights into how Lean implementation changes the roles, responsibilities, and job characteristics of healthcare staff and the challenges and implications that may follow from this.

Lean i Norge : opplever norske bedrifter som er mer lean, større økning i kundetilfredshet enn de som er mindre lean?

OpenAIRE

Fagereng, Hanne Eline; Askevold, Elisabeth Cathrine

2010-01-01

Vi ønsker å måle i hvor stor grad norske bedrifter har implementert lean, og for å måle grad av lean har vi utviklet et rammeverk basert på lean teori. Hovedformålet med lean er å øke kundeverdi med minst mulig ressursbruk, anstrengelse, energi, utstyr, tid, plass, material og kapital (Womack, Roos and Jones 2007). Vi vil utforske om høyere grad av lean fører til mer tilfredse kunder enn de som har lavere grad av lean. Altså om hovedformålet med lean blir oppnådd hvis man implementerer lean i...

Utilizing the Human, Machine, and Environment Matrix in investigations

International Nuclear Information System (INIS)

Curry, David; McKinney, John M.

2006-01-01

'How did we get into this situation?' How many times has this question been asked at the outset of an investigation, or more importantly, at the completion of an investigation? If the answer is not readily and thoroughly apparent, the investigation is not complete. Subsequently, those who will have the responsibility for correction of the conditions leading to the incident will not have all the information necessary to properly complete their task. For many years, in many writings, the Human/Machine interaction and its impact on process design has been discussed. The same impact should be examined when performing incident investigations. Consideration of the interaction of human and machine along with the environment in which they are used has long been recommended by the National Safety Council, in both design and investigation

Machine function based control code algebras

NARCIS (Netherlands)

Bergstra, J.A.

Machine functions have been introduced by Earley and Sturgis in [6] in order to provide a mathematical foundation of the use of the T-diagrams proposed by Bratman in [5]. Machine functions describe the operation of a machine at a very abstract level. A theory of hardware and software based on

Lean information management

NARCIS (Netherlands)

Hammer, D.K.

1997-01-01

The concept of a Lean Enterprise has proven to be extremely valuable for making companies fit for today's competitive business environment. Lean Information Management denotes the type of information management that is appropriate for such all organization. According to the paradigm of a Lean

Lean production

OpenAIRE

Veselková, Jana

2011-01-01

The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

Thutmose - Investigation of Machine Learning-Based Intrusion Detection Systems

Science.gov (United States)

2016-06-01

monitoring. This analyzed payload is within the application layer of the OSI model . The analysis tries to establish whether or not the payload is...24 3.2.5 Model Drift Experiments...ADVERSARIAL ENVIRONMENTS (SPIE DSS 2014) .................................................. 58 APPENDIX C - EVALUATING MODEL DRIFT IN MACHINE LEARNING

EPA Lean Government Initiative: How to Replicate Lean Successes

Science.gov (United States)

This Lean Replication Primer describes how EPA Offices and Regions can identify and adapt successful practices from previous Lean projects to “replicate” their successes and generate further improvements.

An investigation on lean-green implementation practices in Indian SMEs using analytical hierarchy process (AHP) approach

DEFF Research Database (Denmark)

Thanki, Shashank; Govindan, Kannan; Thakkar, Jitesh

2016-01-01

sensitivity analysis of three AHP models, we propose bundles of lean and green practices to surmount the market challenges faced by SMEs. These results are used to develop an integrated framework for lean-green system to guide SMEs towards sustainable growth. The findings are expected to benefit policy makers...... and industrial practitioners of SMEs to focus on a few vital issues to facilitate both lean and green manufacturing implementation and assessment....

Using adapted budget cost variance techniques to measure the impact of Lean – based on empirical findings in Lean case studies

DEFF Research Database (Denmark)

Kristensen, Thomas Borup

2015-01-01

Lean is dominating management philosophy, but the management accounting techniques that best supports this is still not fully understood. Especially how Lean fits traditional budget variance analysis, which is a main theme of every management accounting textbook. I have studied three Scandinavian...

Investigating the impact of a LEGO(TM)-based, engineering-oriented curriculum compared to an inquiry-based curriculum on fifth graders' content learning of simple machines

Science.gov (United States)

Marulcu, Ismail

This mixed method study examined the impact of a LEGO-based, engineering-oriented curriculum compared to an inquiry-based curriculum on fifth graders' content learning of simple machines. This study takes a social constructivist theoretical stance that science learning involves learning scientific concepts and their relations to each other. From this perspective, students are active participants, and they construct their conceptual understanding through the guidance of their teacher. With the goal of better understanding the use of engineering education materials in classrooms the National Academy of Engineering and National Research Council in the book "Engineering in K-12 Education" conducted an in-depth review of the potential benefits of including engineering in K--12 schools as (a) improved learning and achievement in science and mathematics, (b) increased awareness of engineering and the work of engineers, (c) understanding of and the ability to engage in engineering design, (d) interest in pursuing engineering as a career, and (e) increased technological literacy (Katehi, Pearson, & Feder, 2009). However, they also noted a lack of reliable data and rigorous research to support these assertions. Data sources included identical written tests and interviews, classroom observations and videos, teacher interviews, and classroom artifacts. To investigate the impact of the design-based simple machines curriculum compared to the scientific inquiry-based simple machines curriculum on student learning outcomes, I compared the control and the experimental groups' scores on the tests and interviews by using ANCOVA. To analyze and characterize the classroom observation videotapes, I used Jordan and Henderson's (1995) method and divide them into episodes. My analyses revealed that the design-based Design a People Mover: Simple Machines unit was, if not better, as successful as the inquiry-based FOSS Levers and Pulleys unit in terms of students' content learning. I also

Development of a Framework for a Lean based Water and Energy Efficiency Assessment Tool

Directory of Open Access Journals (Sweden)

Edward Davies

2015-07-01

Full Text Available The manufacturing industry of South Africa is the sector consuming the largest portion of the total energy consumption and second largest portion of total water consumption per annum nationally. With a significant increase in electrical energy cost in recent years, together with the reserve energy margin dropping below the minimum level required for sustainable operation of energy utilities, energy efficiency improvement is becoming imperative for organisational success as well as national economical sustainability. This paper explores selected Lean manufacturing principles and its positive effect on energy and water efficiency. Although the implementation of Lean manufacturing techniques naturally leads to the improvement of energy and water intensity, the author believes that there is even greater potential in the development of a Lean based tool which will specifically focus on the improvement of energy and water efficiency. For this purpose the value stream mapping tool was chosen as the foundation. This paper continues to explain the process undergone to develop standardised energy and water specific waste categories to be used in conjunction with the traditional Lean wastes. The study concludes by detailing the development of the tool, together with its framework for implementation and a brief discussion on the forecasting model incorporated.

Analysis Of Lean Accounting JIT And Balance Scorecard In The Companys Lean Manufacturing

OpenAIRE

Irwan Sutirman Wahdiat

2015-01-01

This research purpose to analyze the concept of Lean Manufacturing which is influenced by the role of JIT. This research uses a theoretical approach. This study portrait thinking companies that have yet to implement lean manufacturing and after doing the concept of lean manufacturing. This study shows that the concept of lean manufacturing can make the company more efficient and effective. This paper shows some lean manufacturing dimensions of the researchers previous researchers. This study ...

Operations Strategy Development in Project-based Production – a building contractor implements Lean

DEFF Research Database (Denmark)

Koch, Christian; Friis, Ole Uhrskov

2015-01-01

Purpose: To study how operations strategy innovation occurs in project-based production and organisation. Design/methodology/approach: A longitudinal case study encompassing the processes at the company headquarters and in two projects using Lean. Findings: The operations strategy development com...

Modelling Lean and Green Supply Chain

Science.gov (United States)

Duarte, Susana Carla Vieira Lino Medina

The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the

[Card-based age control mechanisms at tobacco vending machines. Effect and consequences].

Science.gov (United States)

Schneider, S; Meyer, C; Löber, S; Röhrig, S; Solle, D

2010-02-01

Until recently, 700,000 tobacco vending machines provided uncontrolled access to cigarettes for children and adolescents in Germany. On January 1, 2007, a card-based electronic locking device was attached to all tobacco vending machines to prevent the purchase of cigarettes by children and adolescents under 16. Starting in 2009, only persons older than 18 are able to buy cigarettes from tobacco vending machines. The aim of the present investigation (SToP Study: "Sources of Tobacco for Pupils" Study) was to assess changes in the number of tobacco vending machines after the introduction of these new technical devices (supplier's reaction). In addition, the ways smoking adolescents make purchases were assessed (consumer's reaction). We registered and mapped the total number of tobacco points of sale (tobacco POS) before and after the introduction of the card-based electronic locking device in two selected districts of the city of Cologne. Furthermore, pupils from local schools (response rate: 83%) were asked about their tobacco consumption and ways of purchase using a questionnaire. Results indicated that in the area investigated the total number of tobacco POSs decreased from 315 in 2005 to 277 in 2007. The rates of decrease were 48% for outdoor vending machines and 8% for indoor vending machines. Adolescents reported circumventing the card-based electronic locking devices (e.g., by using cards from older friends) and using other tobacco POSs (especially newspaper kiosks) or relying on their social network (mainly friends). The decreasing number of tobacco vending machines has not had a significant impact on cigarette acquisition by adolescent smokers as they tend to circumvent the newly introduced security measures.

Making it lean applying lean practices to the work of it

CERN Document Server

Williams, Howard

2013-01-01

Making IT Lean: Applying Lean Practices to the Work of IT presents Lean concepts and techniques for improving processes and eliminating waste in IT operations and IT Service Management, in a manner that is easy to understand. The authors provide a context for discussing several areas of application within this domain, allowing you to quickly gain insight into IT processes and Lean principles.The text reviews IT Service Management, with reference to the IT Infrastructure Library (ITIL®) as a framework for best practices-explaining how to use it to accommod

Setup Time Reduction On Solder Paste Printing Machine – A Case Study

Directory of Open Access Journals (Sweden)

Rajesh Dhake

2013-06-01

Full Text Available Lean manufacturing envisages the reduction of the seven deadly wastes referred to as MUDA. Setup time forms a major component of the equipment downtime. It leads to lower machine utilization and restricts the output and product variety. This necessitates the requirement for quick setups. Single Minute Exchange of Die philosophy (a lean manufacturing tool here after referred as “SMED” is one of the important tool which aims at quick setups driving smaller lot sizes, lower production costs, improve productivity in terms of increased output, increased utilization of machine and labor hours, make additional capacity available (often at bottleneck resources, reduce scrap and rework, and increase flexibility[3]. This paper focuses on the application of Single Minute Exchange of Die[1] and Quick Changeover Philosophy[2] for reducing setup time on Solder Past Printing Machine (bottleneck machine in a electronic speedo-cluster manufacturing company. The four step SMED philosophy was adopted to effect reduction in setup time. The initial step was gathering information about the present setup times and its proportion to the total productive time. A detailed video based time study of setup activities was done to classify them into external and internal setup activities in terms of their need (i.e. preparation, replacement or adjustment, time taken and the way these could be reduced, simplified or eliminated. The improvements effected were of three categories viz., mechanical, procedural and organizational. The paper concludes by comparing the present and proposed (implemented methods of setup procedures.

TRUNK LEAN DURING A SINGLE-LEG SQUAT IS ASSOCIATED WITH TRUNK LEAN DURING PITCHING.

Science.gov (United States)

Plummer, Hillary A; Oliver, Gretchen D; Powers, Christopher M; Michener, Lori A

2018-02-01

Impaired trunk motion during pitching may be a risk factor for upper extremity injuries. Specifically, increased forces about the shoulder and elbow have been observed in pitchers with excessive contralateral trunk lean during pitching. Because of the difficulty in identifying abnormal trunk motions during a high-speed task such as pitching, a clinical screening test is needed to identify pitchers who have impaired trunk motion during pitching. The purpose of this study was to determine the relationship between the degree of lateral trunk lean during the single-leg squat and amount of trunk lean during pitching and if trunk lean during pitching can be predicted from lean during the single-leg squat. Controlled Laboratory Study; Cross-sectional. Seventy-three young baseball pitchers (11.4 ± 1.7 years; 156.3 ± 11.9 cm; 50.5 ± 8.8 kg) participated. An electromagnetic tracking system was used to obtain trunk kinematic data during a single-leg squat task (lead leg) and at maximum shoulder external rotation of a fastball pitch. Pearson correlation coefficients for trunk lean during the single-leg squat and pitching were calculated. A linear regression analysis was performed to determine if trunk lean during pitching can be predicted from lean during the single-leg squat. There was a positive correlation between trunk lean during the single-leg squat and trunk lean during pitching (r = 0.53; plean during the single-leg squat predicted the amount of lateral trunk lean during pitching (R 2 = 0.28; p lean during an SLS and pitching. Trunk lean during the single-leg squat explained 28% of the variance in trunk lean during pitching. Diagnosis, level 3.

Investigation of approximate models of experimental temperature characteristics of machines

Science.gov (United States)

Parfenov, I. V.; Polyakov, A. N.

2018-05-01

This work is devoted to the investigation of various approaches to the approximation of experimental data and the creation of simulation mathematical models of thermal processes in machines with the aim of finding ways to reduce the time of their field tests and reducing the temperature error of the treatments. The main methods of research which the authors used in this work are: the full-scale thermal testing of machines; realization of various approaches at approximation of experimental temperature characteristics of machine tools by polynomial models; analysis and evaluation of modelling results (model quality) of the temperature characteristics of machines and their derivatives up to the third order in time. As a result of the performed researches, rational methods, type, parameters and complexity of simulation mathematical models of thermal processes in machine tools are proposed.

Lean Startup and Lean Canvas Using for Innovative Product Development

Directory of Open Access Journals (Sweden)

Alena Buchalcevová

2016-06-01

Full Text Available Recently, new approaches to product development have emerged that focus on idea generation techniques and customer itself. One of them is the Lean Startup method that is described in this article along with the Lean Canvas method. The main goal of the article is to demonstrate the application of both methods to an innovative product development focused on providing interactive trips for families with children. The development of the product during individual phases is described and application of the Lean Startup and Lean Canvas principles is demonstrated. Finally, benefits of both methods contributing to the product success are discussed. Similar case studies start emerging worldwide, however in the Czech context are quite rare.

Effect of pressure on the lean limit flames of H2-CH4-air mixture in tubes

KAUST Repository

Zhou, Zhen; Shoshin, Yuriy; Hernandez Perez, Francisco; van Oijen, Jeroen A.; de Goey, Laurentius P.H.

2017-01-01

The lean limit flames of H2-CH4-air mixtures stabilized inside tubes in a downward flow are experimentally and numerically investigated at elevated pressures ranging from 2 to 5 bar. For the shapes of lean limit flames, a change from ball-like flame to cap-like flame is experimentally observed with the increase of pressure. This experimentally observed phenomenon is qualitatively predicted by numerical simulations. The structure of ball-like and cap-like lean limit flames at all tested pressures is analysed in detail based on the numerical predictions. The results show that the lean limit flames are located inside a recirculation zone at all tested pressures. For the leading edges of the lean limit flames at all tested pressures, the fuel transport is controlled by both convection and diffusion. For the trailing edge of the ball-like lean limit flame at 2 bar, the fuel transport is dominated by diffusion. However, with increasing pressure, the transport contribution caused by convection in the trailing edges of the lean limit flames increases. Finally, the influence of transport and chemistry on the predicted ultra lean flames and lean flammability limit is analysed at elevated pressures.

Effect of pressure on the lean limit flames of H2-CH4-air mixture in tubes

KAUST Repository

Zhou, Zhen

2017-05-25

The lean limit flames of H2-CH4-air mixtures stabilized inside tubes in a downward flow are experimentally and numerically investigated at elevated pressures ranging from 2 to 5 bar. For the shapes of lean limit flames, a change from ball-like flame to cap-like flame is experimentally observed with the increase of pressure. This experimentally observed phenomenon is qualitatively predicted by numerical simulations. The structure of ball-like and cap-like lean limit flames at all tested pressures is analysed in detail based on the numerical predictions. The results show that the lean limit flames are located inside a recirculation zone at all tested pressures. For the leading edges of the lean limit flames at all tested pressures, the fuel transport is controlled by both convection and diffusion. For the trailing edge of the ball-like lean limit flame at 2 bar, the fuel transport is dominated by diffusion. However, with increasing pressure, the transport contribution caused by convection in the trailing edges of the lean limit flames increases. Finally, the influence of transport and chemistry on the predicted ultra lean flames and lean flammability limit is analysed at elevated pressures.

Moving on - beyond lean thinking

OpenAIRE

Koskela, Lauri

2004-01-01

Lean Thinking is currently often positioned as the underlying theory of lean production among practitioners and academics, although its originators, Womack and Jones, seem not to have presented it as a theory. This paper endeavors to analyze whether Lean Thinking can be viewed as a theory of lean production. For this purpose, a critical assessment of Lean Thinking is carried out. Lean Thinking is argued to lack an adequate conceptualization of production, which has led to imprecise concepts, ...

Quality improvement in basic histotechnology: the lean approach.

Science.gov (United States)

Clark, David

2016-01-01

Lean is a comprehensive system of management based on the Toyota production system (TPS), encompassing all the activities of an organization. It focuses management activity on creating value for the end-user by continuously improving operational effectiveness and removing waste. Lean management creates a culture of continuous quality improvement with a strong emphasis on developing the problem-solving capability of staff using the scientific method (Deming's Plan, Do, Check, Act cycle). Lean management systems have been adopted by a number of histopathology departments throughout the world to simultaneously improve quality (reducing errors and shortening turnround times) and lower costs (by increasing efficiency). This article describes the key concepts that make up a lean management system, and how these concepts have been adapted from manufacturing industry and applied to histopathology using a case study of lean implementation and evidence from the literature. It discusses the benefits, limitations, and pitfalls encountered when implementing lean management systems.

Using lean methodologies for economically and environmentally sustainable foundries

Directory of Open Access Journals (Sweden)

R. M. Torielli

2011-02-01

Full Text Available Lean manufacturing is often seen as a set of tools that reduce the total cost and improve the quality of manufactured products. The lean management philosophy is one which targets waste reduction in every facet of the manufacturing business; however, only recently have studies linked lean management philosophies with improving environmental sustainability. These studies suggest that lean manufacturing is more than a set of lean tools that can optimize manufacturing efficiencies; it is a process and mindset that needs to be integrated into daily manufacturing systems to achieve sustainability. The foundry industry, as well as manufacturing in general, has significant challenges in the current regulatory and political climate with developing an economically and environmentally sustainable business model. Lean manufacturing has proven itself as a model for both economic sustainability and environmental stewardship. Several recent studies have shown that both lean and green techniques and “zero-waste” policies also lead to reductions in overall cost. While these strategies have been examined for general manufacturing, they have not been investigated in detail for the foundry industry. This paper will review the current literature and describe how lean and green can provide a relevant framework for environmentally and economically sustainable foundries. Examples of lean and green technologies and techniques which can be applied to foundries in a global context will be described.

Lean Leadership - Organizational Buy - Ins

Directory of Open Access Journals (Sweden)

Dr. Revathi Iyer

2017-05-01

Full Text Available Great organizations have become leaders due to their leadership and sustainable initiatives. One such initiative is adoption of lean leadership to align core strategies with all functional areas of business. Leadership is likely to take place in a lean environment because improvements that happen are continual and can only be supported by leadership which understands this important aspect. The topic of lean leadership organizational buy ins speaks on how lean leadership could affect organizations that adopt lean and other quality tools. Purpose of the study This study has been undertaken to understand When leadership more of is likely to take place in lean . Leadership plays a very important role while adopting lean processes and how lean leadership can address the process problem. Application of leadership lenses to lean processes needs great foresight thought and creativity. It has been also observed that lean management and lean processes can happen only if leadership is able to effectively communicate the thought of continual improvement to bring in a lean organization and a future state of processes where everything of a firm process and procedure is continually improving and the best strategies to manage this change becomes a philosophy. Lean leadership is associated with such a change. This enables leadership vision to be clear as it paves the way for current state and is clear to everyone. It is this leadership vision which enables employees to think and act in a way that perpetrates continual improvement. Hence leadership buys ins for lean are very necessary. The purpose of the study is also to understand how leaders can not only use cost reduction but also reducing time-to-market improving service quality and reducing risk exposure by adopting lean methods . it has been also seen that there is overall productivity and efficiency in organizations holistically when leadership endorses lean methodology. Radnor Z. and Bucci G. 2007

Barriers of lean construction implementation in the Moroccan construction industry

Science.gov (United States)

Bajjou, Mohamed Saad; Chafi, Anas

2018-04-01

Improving the production system performance has become a fundamental pillar that must be taken into consideration in the construction industry. Recent developments in the construction sector have led to renewed interest in new techniques of management. Lean Construction is a very effective approach that has gained a high popularity by its ability to eliminate waste and maximize the value for the customer. Although both developed and developing countries have gained large benefits by implementing Lean Construction approach, several experiences showed many barriers that are hindering its implementation especially in developing countries. This paper aims to assess the critical barriers to the successful implementation in the Moroccan construction industry. Based on a literature review, followed by an analysis of data collected from a questionnaire survey which targeted 330 practitioners in the Moroccan construction field, several barriers were identified as key barriers. The findings of this investigation revealed that there are significant barriers such as Lack of knowledge about Lean Construction concepts, Unskilled Human Resources, and insufficient financial resources.

Investigations of Cutting Fluid Performance Using Different Machining Operations

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Belluco, Walter

2002-01-01

An analysis of cutting fluid performance in dif-ferent metal cutting operations is presented based on performance criteria, work material and fluid type. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping operations, with respect to tool life, cutting forces and prod...... will get the same performance ranking for different metalworking fluids no matter what machining test is used, when the fluids are of the same type. Results show that this is mostly true for the water-based fluids on austenitic stainless steel while ranking did change depending on the test with straight......-gated. In the case of austenitic stainless steel as the workpiece material, results using the different operations under different cutting conditions show that the performance of vegetable oil based prod-ucts is superior or equal to that of mineral oil based products. The hypothesis was investigated that one...

Buildings Lean Maintenance Implementation Model

Science.gov (United States)

Abreu, Antonio; Calado, João; Requeijo, José

2016-11-01

Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

Investigation of a less rare-earth permanent-magnet machine with the consequent pole rotor

Science.gov (United States)

Bai, Jingang; Liu, Jiaqi; Wang, Mingqiao; Zheng, Ping; Liu, Yong; Gao, Haibo; Xiao, Lijun

2018-05-01

Due to the rising price of rare-earth materials, permanent-magnet (PM) machines in different applications have a trend of reducing the use of rare-earth materials. Since iron-core poles replace half of PM poles in the consequent pole (CP) rotor, the PM machine with CP rotor can be a promising candidate for less rare-earth PM machine. Additionally, the investigation of CP rotor in special electrical machines, like hybrid excitation permanent-magnet PM machine, bearingless motor, etc., has verified the application feasibility of CP rotor. Therefore, this paper focuses on design and performance of PM machines when traditional PM machine uses the CP rotor. In the CP rotor, all the PMs are of the same polarity and they are inserted into the rotor core. Since the fundamental PM flux density depends on the ratio of PM pole to iron-core pole, the combination rule between them is investigated by analytical and finite-element methods. On this basis, to comprehensively analyze and evaluate PM machine with CP rotor, four typical schemes, i.e., integer-slot machines with CP rotor and surface-mounted PM (SPM) rotor, fractional-slot machines with CP rotor and SPM rotor, are designed to investigate the performance of PM machine with CP rotor, including electromagnetic performance, anti-demagnetization capacity and cost.

Performance effect of Lean

DEFF Research Database (Denmark)

Kristensen, Thomas Borup; Israelsen, Poul

2016-01-01

To understand how the practices of Lean affect performance, we tested and validated a system-wide approach using mediating relationships in a structural equation model. We used a cross-sectional survey of 200 Danish companies that indicated that they used Lean. Thus, this study is especially...... relevant to Denmark, but the approach is empirically more generalizable. We show that the effect of Lean standardized flow production practices on performance is mediated by analytical continuous improvement empowerment practices and by delegation of decision rights practices. Thus, standardized flow...... of decision rights. The paper provides evidence that supports the view that middle managers’ actions further enhance performance in Lean companies. The right Lean behavior by middle managers increases the level of analytical continuous improvement empowerment. In total, high-performing Lean companies...

Preliminary Test of Upgraded Conventional Milling Machine into PC Based CNC Milling Machine

International Nuclear Information System (INIS)

Abdul Hafid

2008-01-01

CNC (Computerized Numerical Control) milling machine yields a challenge to make an innovation in the field of machining. With an action job is machining quality equivalent to CNC milling machine, the conventional milling machine ability was improved to be based on PC CNC milling machine. Mechanically and instrumentally change. As a control replacing was conducted by servo drive and proximity were used. Computer programme was constructed to give instruction into milling machine. The program structure of consists GUI model and ladder diagram. Program was put on programming systems called RTX software. The result of up-grade is computer programming and CNC instruction job. The result was beginning step and it will be continued in next time. With upgrading ability milling machine becomes user can be done safe and optimal from accident risk. By improving performance of milling machine, the user will be more working optimal and safely against accident risk. (author)

Lean Production Practices to Enhance Organisational Performance

Directory of Open Access Journals (Sweden)

Shah Satya

2017-01-01

Full Text Available Service sector organisations are constantly overcoming the challenges facing the over-production and waste reduction within their environments. Industries are also becoming very competitive thus forcing them to seek suitable production organisation strategies with the aim towards enhancing their competitiveness and efficiency. The aim of this research study is to investigate the impact of lean production practices on the performance of service based businesses through the case study of a local baked goods supplier. The research framework adopted consists of questionnaire survey method implemented with different end users, thus covering the overall production – retail – customer cycle. The research results and analysis justify the objective of the research that lean production practices enhance the performance of the supplier company and the common tool identified were JIT (Just in Time, Value Steam Mapping (VSP and the 5S methods. The results also suggest that JIT method has a higher impact towards improvement on performance relating to quality, speed, dependability, flexibility and cost of the supplier. However, the research study also identifies that one of the major challenges faced by the organisation while adopting lean practices was the lack of commitment from top management, continuous training and employee engagement measures.

Development of framework for sustainable Lean implementation: an ISM approach

Science.gov (United States)

Jadhav, Jagdish Rajaram; Mantha, S. S.; Rane, Santosh B.

2014-07-01

The survival of any organization depends upon its competitive edge. Even though Lean is one of the most powerful quality improvement methodologies, nearly two-thirds of the Lean implementations results in failures and less than one-fifth of those implemented have sustained results. One of the most significant tasks of top management is to identify, understand and deploy the significant Lean practices like quality circle, Kanban, Just-in-time purchasing, etc. The term `bundle' is used to make groups of inter-related and internally consistent Lean practices. Eight significant Lean practice bundles have been identified based on literature reviewed and opinion of the experts. The order of execution of Lean practice bundles is very important. Lean practitioners must be able to understand the interrelationship between these practice bundles. The objective of this paper is to develop framework for sustainable Lean implementation using interpretive structural modelling approach.

Lean in healthcare: A comprehensive review.

Science.gov (United States)

D'Andreamatteo, Antonio; Ianni, Luca; Lega, Federico; Sargiacomo, Massimo

2015-09-01

Lean seems to be the next revolution for a better, improved, value-based healhcare. In the last 15 years Lean has been increasingly adapted and adopted in healthcare. Accordingly, Lean healthcare has been developing into a major strand of research since the early 2000s. The aim of this work is to present a comprehensive overview of the main issues highlighted by research on implementation of Lean in a complex contest such as the healthcare one. Comprehensive literature review was conducted in order to identify empirical and theoretical articles published up to September 2013. Thematic analysis was performed in order to extract and synthesis data. 243 articles were selected for analysis. Lean is best understood as a means to increase productivity. Hospital is the more explored setting, with emergency and surgery as the pioneer departments. USA appears to be the leading country for number of applications. The theoretical works have been focused mainly on barriers, challenges and success factors. Sustainability, framework for measurement and critical appraisal remain underestimated themes. Evaluations of "system wide approach" are still low in number. Even though Lean results appear to be promising, findings so far do not allow to draw a final word on its positive impacts or challenges when introduced in the healthcare sector. Scholars are called to explore further the potentiality and the weaknesses of Lean, above all as for the magnitude of investments required and for the engagement of the whole organization it represents increasingly strategic choice, whilst health professionals, managers and policy makers could and should learn from research how to play a pivotal role for a more effective implementation of lean in different health contexts. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

What Determines Lean Manufacturing Implementation? A CB-SEM Model

Directory of Open Access Journals (Sweden)

Tan Ching Ng

2018-02-01

Full Text Available This research aims to ascertain the determinants of effective Lean Manufacturing (LM. In this research, Covariance-based Structural Equation Modeling (CB-SEM analysis will be used in order to analyze the determinants. Through CB-SEM analysis, the significant key determinants can be determined and the direct relationships among determinants can be analyzed. Thus, the findings of this research can act as guidelines for achievement of LM effectiveness, not only providing necessary steps for successful implementation of lean, but also helping lean companies to achieve higher level of lean cost and time savings.

Empirical Investigation of Optimization Algorithms in Neural Machine Translation

Directory of Open Access Journals (Sweden)

Bahar Parnia

2017-06-01

Full Text Available Training neural networks is a non-convex and a high-dimensional optimization problem. In this paper, we provide a comparative study of the most popular stochastic optimization techniques used to train neural networks. We evaluate the methods in terms of convergence speed, translation quality, and training stability. In addition, we investigate combinations that seek to improve optimization in terms of these aspects. We train state-of-the-art attention-based models and apply them to perform neural machine translation. We demonstrate our results on two tasks: WMT 2016 En→Ro and WMT 2015 De→En.

Improving Healthcare through Lean Management

DEFF Research Database (Denmark)

Nielsen, Anders Paarup; Edwards, Kasper

2011-01-01

The ideas and principles from lean management are now widely being adopted within the healthcare sector. The analysis in this paper shows that organizations within healthcare most often only implement a limited set of tools and methods from the lean tool-box. Departing from a theoretical analysis...... of the well-known and universal lean management principles in the context of the healthcare this paper will attempt to formulate and test four hypotheses about possible barriers to the successful implementation of lean management in healthcare. The first hypothesis states that lean management in healthcare....... The paper concludes by discussing the implications of hypothesis two, three, and four for the successful application of lean management within healthcare. Is it concluded that this requires a transformative and contingent approach to lean management where the universal principles of the lean philosophy...

Lean programm as a method of managing lean changes in the company

Directory of Open Access Journals (Sweden)

Suetina Tatiana Aleksandrovna

2012-12-01

Full Text Available This article is about methods and ways of providing changes on enterprices which introduce instruments of lean production. The main accent is how to use metodology of the project management by providing lean-changes. Lean program is proposed as a program of strategic developement of enterprices.

Lean and the Learning Organization in Higher Education

Science.gov (United States)

Francis, David E.

2014-01-01

Canadian post-secondary institutions are seeking enhanced efficiencies due to ongoing funding shortfalls and expanding teaching, research, and service mandates. These institutions have considered or enacted Lean methodology based on results reported by public service and healthcare organizations worldwide. Lean requires a high level of…

Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

OpenAIRE

Ming Cheng; Le Sun; Giuseppe Buja; Lihua Song

2015-01-01

The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs). Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator perm...

A Model to align the organizational culture to Lean

Directory of Open Access Journals (Sweden)

Mehrsa Taherimashhadi

2018-04-01

Full Text Available Purpose: Since the emergence of Lean Manufacturing many organizations strived to implement it. Nonetheless, sustainable Lean transformation is not as easy as to be simply achieved. Several aspects need to be taken into account before Lean implementation which national and organizational culture are important. By considering influences of national culture on the organizational culture, this paper aims at proposing an evaluation model to determine the cultural weaknesses of an organization and give some recommendations to manage people before implementing Lean. Design/methodology/approach: This research has been conducted based on literature review survey and semi-structured interviews. Research papers, conference proceedings, books, and official websites regarding Lean philosophy were reviewed to find the influence of national culture in Lean implementation. Different databases were scrutinized, from 2015 to 2017, containing Scopus and Web of Science with the time period of 1996-2016. A set of key terms and their combinations were used including: Toyota Production system, Lean production, Lean manufacturing, Lean management, Transformation, Implementation, Barriers/ Impediments/Challenges/Difficulties, Human resources, Success factors, Organizational culture, and National culture. Findings: The proposed evaluation model is a guide for organizations to determine cultural misalignments between the corporate culture and the Lean culture before its implementation and gives some managerial recommendations to correct them. Originality/value: This study is the first attempt to integrate the national models   with Lean culture to provide an evaluation model and some recommendations to help the organization to align its culture to Lean culture before its implementation.

Diet-induced obesity, energy metabolism and gut microbiota in C57BL/6J mice fed Western diets based on lean seafood or lean meat mixtures.

Science.gov (United States)

Holm, Jacob Bak; Rønnevik, Alexander; Tastesen, Hanne Sørup; Fjære, Even; Fauske, Kristin Røen; Liisberg, Ulrike; Madsen, Lise; Kristiansen, Karsten; Liaset, Bjørn

2016-05-01

High protein diets may protect against diet-induced obesity, but little is known regarding the effects of different protein sources consumed at standard levels. We investigated how a mixture of lean seafood or lean meat in a Western background diet modulated diet-induced obesity, energy metabolism and gut microbiota. Male C57BL/6J mice fed a Western diet (WD) containing a mixture of lean seafood (seafood WD) for 12weeks accumulated less fat mass than mice fed a WD containing a mixture of lean meat (meat WD). Meat WD-fed mice exhibited increased fasting blood glucose, impaired glucose clearance, elevated fasting plasma insulin and increased plasma and liver lipid levels. We observed no first choice preference for either of the WDs, but over time, mice fed the seafood WD consumed less energy than mice fed the meat WD. Mice fed the seafood WD exhibited higher spontaneous locomotor activity and a lower respiratory exchange ratio (RER) than mice fed the meat WD. Thus, higher activity together with the decreased energy intake contributed to the different phenotypes observed in mice fed the seafood WD compared to mice fed the meat WD. Comparison of the gut microbiomes of mice fed the two WDs revealed significant differences in the relative abundance of operational taxonomic units (OTUs) belonging to the orders Bacteroidales and Clostridiales, with genes involved in metabolism of aromatic amino acids exhibiting higher relative abundance in the microbiomes of mice fed the seafood WD. Copyright © 2016 Elsevier Inc. All rights reserved.

Lean computing for the cloud

CERN Document Server

Bauer, Eric

2016-01-01

Applies lean manufacturing principles across the cloud service delivery chain to enable application and infrastructure service providers to sustainably achieve the shortest lead time, best quality, and value This book focuses on lean in the context of cloud computing capacity management of applications and the physical and virtual cloud resources that support them. Lean Computing for the Cloud considers business, architectural and operational aspects of efficiently delivering valuable services to end users via cloud-based applications hosted on shared cloud infrastructure. The work also focuses on overall optimization of the service delivery chain to enable both application service and infrastructure service providers to adopt leaner, demand driven operations to serve end users more efficiently. The book’s early chapters analyze how capacity management morphs with cloud computing into interlocked physical infrastructure capacity management, virtual resou ce capacity management, and application capacity ma...

Green-Lean Synergy - Root-Cause Analysis in Food Waste Prevention

Directory of Open Access Journals (Sweden)

Pegah Amani

2015-06-01

Full Text Available Purpose_The goal of this paper is to explore the possible synergetic effects between lean philosophy and green endeavors in improving resource efficiency in the food sector. To that end, it is investigated how a proper and tailor-made adaptation of the lean six sigma root cause analysis method could help in overcoming the complexities of increased resource efficiency in food production.Design/methodology/approach_The case study concerned reduction of waste at an industrial production line of a dough-based product, through the implementation of the lean six sigma tool.Findings_An achievement of a 50% reduction of waste on the studied process line was reached, thus exceeding the initial improvement goal.Research limitations/implications (if applicable_While the explicit findings on the specific root causes of waste on this actual production line are not immediately transferrable to other cases, they show that applying this method to identifying and eliminating root causes of waste for other products and processes in the food sector could not only reduce costs but also contribute to more resource-efficient and sustainable industrial food production.Practical implications (if applicable_ Political and public high interest in environmental and social sustainability associated with food waste render this an important development.Originality/value_ While the potential of linking green and lean efforts has been acknowledged, the application of the lean six sigma methodology for more sustainable food production has not yet been explored. This paper contributes to this research

Spatiotemporal distribution of NOx storage and impact on NH3 and N2O selectivities during lean/rich cycling of a Ba-based lean NOx trap catalyst

Energy Technology Data Exchange (ETDEWEB)

Choi, Jae-Soon [ORNL; Partridge Jr, William P [ORNL; Pihl, Josh A [ORNL; Kim, Miyoung [ORNL; Koci, Petr [Institute of Chemical Technology, Prague, Czech Republic; Daw, C Stuart [ORNL

2012-01-01

We summarize results from an investigation of the spatiotemporal distribution of NO{sub x} storage and intermediate gas species in determining the performance of a fully formulated, Ba-based, lean NO{sub x} trap catalyst under lean/rich cycling conditions. By experimentally resolving spatiotemporal profiles of gas composition, we found that stored NO{sub x} was significantly redistributed along the monolith axis during the rich phase of the cycle by release and subsequent downstream re-adsorption. Sulfur poisoning of upstream NO{sub x} storage sites caused the active NO{sub x}-storage zone to be displaced downstream. This axial displacement in turn influenced rich-phase NO{sub x} release and re-adsorption. As sulfur poisoning increased, NH3 slip at the catalyst exit also increased due to its formation closer to the catalyst outlet and decreased exposure to downstream oxidation by surface oxygen. N{sub 2}O formation was found to be associated with nitrate reduction rather than oxidation of NH3 by stored oxygen. We propose that the observed evolution of N{sub 2}O selectivity with sulfation can be explained by changes in the spatiotemporal distribution of NO{sub x} storage resulting in either increased or decreased number of precious-metal sites surrounded by nitrates.

Is There a Lean Future for Global Startups?

Directory of Open Access Journals (Sweden)

Stoyan Tanev

2017-05-01

Full Text Available This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing on global startups, and further substantiates the articulation of the need for considering the lean global startup as a new type of firm. The main message is that the lessons learned from the emergence of lean startup entrepreneurship offer a basis for promoting a similar lean phase in technology-based global startup research and practice. The analysis should benefit both researchers and practitioners in technology entrepreneurship, international entrepreneurship, and global innovation management.

Waste Measurement Techniques For Lean Companies

Directory of Open Access Journals (Sweden)

Maciej Pieńkowski

2014-12-01

Full Text Available The paper is dedicated to answer the problem of measuring waste in companies, which are implementing Lean Manufacturing concept. Lack of complex identification, quantification an visualization of waste significantly impedes Lean transformation efforts. This problem can be solved by a careful investigation of Muda, Muri and Mura, which represent the essence of waste in the Toyota Production System. Measuring them facilitates complete and permanent elimination of waste in processes. The paper introduces a suggestion of methodology, which should enable company to quantify and visualize waste at a shop floor level.

Implementation of lean leadership

Directory of Open Access Journals (Sweden)

Trenkner Małgorzata

2016-12-01

Full Text Available The Toyota case proves that lean leadership is of critical importance for the successful implementation and permanent functioning of Lean Production System. There is no ready formula for developing Toyota style lean leadership. However, one may gain inspiration from its experience.

Buoyant Unstable Behavior of Initially Spherical Lean Hydrogen-Air Premixed Flames

Directory of Open Access Journals (Sweden)

Zuo-Yu Sun

2014-07-01

Full Text Available Buoyant unstable behavior in initially spherical lean hydrogen-air premixed flames within a center-ignited combustion vessel have been studied experimentally under a wide range of pressures (including reduced, normal, and elevated pressures. The experimental observations show that the flame front of lean hydrogen-air premixed flames will not give rise to the phenomenon of cellular instability when the equivalence ratio has been reduced to a certain value, which is totally different from the traditional understanding of the instability characteristics of lean hydrogen premixed flames. Accompanied by the smoothened flame front, the propagation mode of lean hydrogen premixed flames transitions from initially spherical outwardly towards upwardly when the flames expand to certain sizes. To quantitatively investigate such buoyant instability behaviors, two parameters, “float rate (ψ” and “critical flame radius (Rcr”, have been proposed in the present article. The quantitative results demonstrate that the influences of initial pressure (Pint on buoyant unstable behaviors are different. Based on the effects of variation of density difference and stretch rate on the flame front, the mechanism of such buoyant unstable behaviors has been explained by the competition between the stretch force and the results of gravity and buoyancy, and lean hydrogen premixed flames will display buoyant unstable behavior when the stretch effects on the flame front are weaker than the effects of gravity and buoyancy.

Lean government : Critical success factors for XBRL-based business-to-government reporting

NARCIS (Netherlands)

Bharosa, N.; De Winne, C.P.I.; Van Wijk, R.; Janssen, M.F.W.H.A.

2012-01-01

Lean government is all about doing better with less through the use of ICT and the realisation of process improvements. The recently introduced eXtensible Business Reporting Language (XBRL) has shown some initial success in realising lean government. Once data is stored in XBRL format, businesses

Dynamic Data-Driven Prediction of Lean Blowout in a Swirl-Stabilized Combustor

Directory of Open Access Journals (Sweden)

Soumalya Sarkar

2015-09-01

Full Text Available This paper addresses dynamic data-driven prediction of lean blowout (LBO phenomena in confined combustion processes, which are prevalent in many physical applications (e.g., land-based and aircraft gas-turbine engines. The underlying concept is built upon pattern classification and is validated for LBO prediction with time series of chemiluminescence sensor data from a laboratory-scale swirl-stabilized dump combustor. The proposed method of LBO prediction makes use of the theory of symbolic dynamics, where (finite-length time series data are partitioned to produce symbol strings that, in turn, generate a special class of probabilistic finite state automata (PFSA. These PFSA, called D-Markov machines, have a deterministic algebraic structure and their states are represented by symbol blocks of length D or less, where D is a positive integer. The D-Markov machines are constructed in two steps: (i state splitting, i.e., the states are split based on their information contents, and (ii state merging, i.e., two or more states (of possibly different lengths are merged together to form a new state without any significant loss of the embedded information. The modeling complexity (e.g., number of states of a D-Markov machine model is observed to be drastically reduced as the combustor approaches LBO. An anomaly measure, based on Kullback-Leibler divergence, is constructed to predict the proximity of LBO. The problem of LBO prediction is posed in a pattern classification setting and the underlying algorithms have been tested on experimental data at different extents of fuel-air premixing and fuel/air ratio. It is shown that, over a wide range of fuel-air premixing, D-Markov machines with D > 1 perform better as predictors of LBO than those with D = 1.

Theories of lean management: an empirical evaluation.

Science.gov (United States)

Handel, Michael J

2014-03-01

Debates within organization theory traditionally argued the relative merits of bureaucracy but today there is broad agreement across different perspectives that bureaucratic organization is inefficient and outmoded. Despite their differences, post-bureaucratic and neo-liberal theories argue that organizations with relatively flat hierarchies and low management overhead are better adapted to current market requirements. Post-bureaucratic theory also argues that employees, as well as firms, benefit from leaner management structures. This paper investigates trends in managerial leanness, proposed explanations for such trends, and the consequences of leanness for firms and employees. Although there is a trend toward flatter management hierarchies, there is only weak support for current claims regarding both the causes and consequences of lean management. Copyright © 2013 Elsevier Inc. All rights reserved.

An investigation of turbulent catalytically stabilized channel flow combustion of lean hydrogen - air mixtures

Energy Technology Data Exchange (ETDEWEB)

Mantzaras, I; Benz, P; Schaeren, R; Bombach, R [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1999-08-01

The catalytically stabilised thermal combustion (CST) of lean hydrogen-air mixtures was investigated numerically in a turbulent channel flow configuration using a two-dimensional elliptic model with detailed heterogeneous and homogeneous chemical reactions. Comparison between turbulent and laminar cases having the same incoming mean properties shows that turbulence inhibits homogeneous ignition due to increased heat transport away from the near-wall layer. The peak root-mean-square temperature and species fluctuations are always located outside the extent of the homogeneous reaction zone indicating that thermochemical fluctuations have no significant influence on gaseous combustion. (author) 4 figs., 6 refs.

Association Rule-based Predictive Model for Machine Failure in Industrial Internet of Things

Science.gov (United States)

Kwon, Jung-Hyok; Lee, Sol-Bee; Park, Jaehoon; Kim, Eui-Jik

2017-09-01

This paper proposes an association rule-based predictive model for machine failure in industrial Internet of things (IIoT), which can accurately predict the machine failure in real manufacturing environment by investigating the relationship between the cause and type of machine failure. To develop the predictive model, we consider three major steps: 1) binarization, 2) rule creation, 3) visualization. The binarization step translates item values in a dataset into one or zero, then the rule creation step creates association rules as IF-THEN structures using the Lattice model and Apriori algorithm. Finally, the created rules are visualized in various ways for users’ understanding. An experimental implementation was conducted using R Studio version 3.3.2. The results show that the proposed predictive model realistically predicts machine failure based on association rules.

A deviation based assessment methodology for multiple machine health patterns classification and fault detection

Science.gov (United States)

Jia, Xiaodong; Jin, Chao; Buzza, Matt; Di, Yuan; Siegel, David; Lee, Jay

2018-01-01

Successful applications of Diffusion Map (DM) in machine failure detection and diagnosis have been reported in several recent studies. DM provides an efficient way to visualize the high-dimensional, complex and nonlinear machine data, and thus suggests more knowledge about the machine under monitoring. In this paper, a DM based methodology named as DM-EVD is proposed for machine degradation assessment, abnormality detection and diagnosis in an online fashion. Several limitations and challenges of using DM for machine health monitoring have been analyzed and addressed. Based on the proposed DM-EVD, a deviation based methodology is then proposed to include more dimension reduction methods. In this work, the incorporation of Laplacian Eigen-map and Principal Component Analysis (PCA) are explored, and the latter algorithm is named as PCA-Dev and is validated in the case study. To show the successful application of the proposed methodology, case studies from diverse fields are presented and investigated in this work. Improved results are reported by benchmarking with other machine learning algorithms.

Integration of six sigma with lean production: an analysis through multiple cases

Directory of Open Access Journals (Sweden)

Thiago Henrique Pinheiro

2013-08-01

Full Text Available The intense competition between markets has taken companies, regardless of their size, to implement one or more quality improvement programs. One of the main purposes of these programs is the enhancement of company effectiveness and efficiency. There is today a growing interested in a proposal named Lean Six Sigma. Their objective is to apply six sigma concepts integrated with Lean Production. A model named Lean Six Sigma has raised interest, once its objective is to apply the concepts of the Six Sigma program integrating them with the principles of Lean Production. Six Sigma contributes with methods for problem identification, measurement and analysis, and the Lean Production offers techniques and procedures applied to reduce waste in the production. In this context, this paper aims at demonstrating the results of a field research, from which purpose was to identify relevant factors for Six Sigma implementation combined with Lean Production. To meet these objectives, three organizations from different industrial sectors were investigated. It was verified that in two of those companies, the programs were successfully implemented. Based on data analysis, it is possible to identify that one of the major difficulties encountered by the program leaders is related to the company’s human resources infra-structure. It is necessary to take into account that the conclusions are limited to a small sample of three units of analysis. However, this work offers the possibility of an analytical generalization.

LEAN and energy efficiency; Lean og energieffektivisering

Energy Technology Data Exchange (ETDEWEB)

Jespersen, Per T; Vesterager Christensen, D; Andersen, Hans [Teknologisk Institut, Energi og Klima, Taastrup (Denmark); Dam Wied, M; Dam, M [NRGi Raadgivning, Aarhus (Denmark); Thorndahl, M [Horsens Kommune, Horsens (Denmark); Weldingh, P [Lokal Energi, Viby J. (Denmark); Maagoee, P; Kristensen, Kenneth T [Viegand og Maagoee, Copenhagen (Denmark); Kirketerp Friis, A [Novozymes, Bagsvaerd (Denmark)

2010-03-15

By means of theoretical reports and three specific cases, the project showed how Lean principles can improve energy consulting efficiency, thus making it easier for end-users and energy consultants to record and document energy savings achieved. The three cases documented various types of extra benefits of integrating energy efficiency improvement in Lean processes. As a result of process optimisation, one manufacturing company successfully reduced both staffing and energy consumption, thus making production in Denmark competitive with out-sourced production in Asia. (LN)

Development and validation of a multidimensional measure of lean manufacturing

Directory of Open Access Journals (Sweden)

Juan A. Marin-Garcia

2010-02-01

Full Text Available In the last 30 years of research of lean manufacturing many different questionnaires was proposed to check the degree of the use of the concept. The set of the items used changed considerably from one investigation to another one. Until now isn’t appreciate a movement that converge towards the use, by the investigators, of a few instruments whose validity and reliability have been compared in different surroundings. In fact, the majority of investigations are based on ad-hoc questionnaires and a few of them present the questionnaire validation checking only the unidimensionality and -Cronbach. Nevertheless it seems to have a consensus in identifying 5 big constructs that compose the lean manufacturing (TQM, JIT, TPM, supply chain management and high-involvement. Our research has consisted of identifying and summarizing the models that have been published previously to add the items in constructs or sub-scales of constructs. Later we developed an integrating questionnaire, starting off of the items that appeared in previous investigations. Finally we realized the sub-scales and models validation through a confirmatory factorial analysis, using date of a sample of Spanish Sheltered Work Centre’s (N=128. Of all proposed models, the best an adjustment takes place with the first order model with 20 sub-scales. Our investigation contributes to an integrating vision of the published models and the lean manufacturing sub-scales validity and reliability verification raised by other investigators. Due to his confirming approach, it can serve as generalization of studies that had been realized in contexts with different samples to which we have used for the replication.

Lean principles applied to software development – avoiding waste

Directory of Open Access Journals (Sweden)

Ionel NAFTANAILA

2009-12-01

Full Text Available Under the current economic conditions many organizations strive to continue the trend towards adopting better software development processes, in order to take advantage of the numerous benefits that these can offer. Those benefits include quicker return on investment, better software quality, and higher customer satisfaction. To date, however, there is little body of research that can guide organizations in adopting modern software development practices, especially when it comes to Lean thinking and principles. To address this situation, the current paper identifies and structures the main wastes (or muda in Lean terms in software development as described by Lean principles, in an attempt to bring into researchers’ and practitioners’ attention Lean Software Development, a modern development methodology based on well-established practices such as Lean Manufacturing or Toyota Production System.

LEAN dig ikke tilbage

DEFF Research Database (Denmark)

Weirsøe, Mathilde

2011-01-01

Fit, slankere, hurtigst. Lean-konceptet ruller ind over de offentlige institutioner, hvor det skal trimme og effektivisere arbejdsprocesser. Men hvor er den maksimale grænse for effektivitet? Er der et ’tipping point’, hvor Lean ikke længere motiverer, men snarere udmatter......Fit, slankere, hurtigst. Lean-konceptet ruller ind over de offentlige institutioner, hvor det skal trimme og effektivisere arbejdsprocesser. Men hvor er den maksimale grænse for effektivitet? Er der et ’tipping point’, hvor Lean ikke længere motiverer, men snarere udmatter...

THE USE OF KNOWLEDGE MANAGEMENT SYSTEMS AND EVENT-B MODELLING IN A LEAN ENTERPRISE

Directory of Open Access Journals (Sweden)

Ladislav Buřita

2018-03-01

Full Text Available This paper provides a case study describing an approach to improving the efficiency of an information system (IS by supporting processes outside the IS, using the ontology-driven knowledge management systems (KMS as a mini-application in the area of so-called lean enterprise. Lean enterprise is focused on creating a maximal value for final customers while eliminating all kinds of waste and unnecessary costs, which significantly helps to increase the level of its competitiveness. It is about managerial decision-making, which can be in some cases contradictory (solving a local problem can cause a problem in another place. In this paper, we describe the KMS ATOM, which supports the innovation process in a lean enterprise. We show how the risk of wrong decisions due to contradictory effects can be eliminated by implementing a safety-critical system into the traditional IS. Our model is supported by Event-B modelling, a refinement-based formal modelling method, which is successfully used in important areas such as infrastructure, medicine, nuclear engineering and transportation (fire alarm systems, robotic surgery machines, braking systems in transportation, etc.. Nowadays, Event-B modelling is starting to be used for various management decision-making activities, and it is becoming a powerful competitiveness tool. This paper introduces a simple example of how Event-B modelling and its proof obligations can help improve and automate the decision-making process by eliminating potential threats of inefficient decisions.

Is there a lean future for global startups?

DEFF Research Database (Denmark)

Tanev, Stoyan

2017-01-01

This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing on gl......-based global startup research and practice. The analysis should benefit both researchers and practitioners in technology entrepreneurship, international entrepreneurship, and global innovation management.......This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing...... on global startups, and further substantiates the articulation of the need for considering the lean global startup as a new type of firm. The main message is that the lessons learned from the emergence of lean startup entrepreneurship offer a basis for promoting a similar lean phase in technology...

Application of lean manufacturing techniques in the Emergency Department.

Science.gov (United States)

Dickson, Eric W; Singh, Sabi; Cheung, Dickson S; Wyatt, Christopher C; Nugent, Andrew S

2009-08-01

"Lean" is a set of principles and techniques that drive organizations to continually add value to the product they deliver by enhancing process steps that are necessary, relevant, and valuable while eliminating those that fail to add value. Lean has been used in manufacturing for decades and has been associated with enhanced product quality and overall corporate success. To evaluate whether the adoption of Lean principles by an Emergency Department (ED) improves the value of emergency care delivered. Beginning in December 2005, we implemented a variety of Lean techniques in an effort to enhance patient and staff satisfaction. The implementation followed a six-step process of Lean education, ED observation, patient flow analysis, process redesign, new process testing, and full implementation. Process redesign focused on generating improvement ideas from frontline workers across all departmental units. Value-based and operational outcome measures, including patient satisfaction, expense per patient, ED length of stay (LOS), and patient volume were compared for calendar year 2005 (pre-Lean) and periodically after 2006 (post-Lean). Patient visits increased by 9.23% in 2006. Despite this increase, LOS decreased slightly and patient satisfaction increased significantly without raising the inflation adjusted cost per patient. Lean improved the value of the care we delivered to our patients. Generating and instituting ideas from our frontline providers have been the key to the success of our Lean program. Although Lean represents a fundamental change in the way we think of delivering care, the specific process changes we employed tended to be simple, small procedure modifications specific to our unique people, process, and place. We, therefore, believe that institutions or departments aspiring to adopt Lean should focus on the core principles of Lean rather than on emulating specific process changes made at other institutions.

Lean management systems: creating a culture of continuous quality improvement.

Science.gov (United States)

Clark, David M; Silvester, Kate; Knowles, Simon

2013-08-01

This is the first in a series of articles describing the application of Lean management systems to Laboratory Medicine. Lean is the term used to describe a principle-based continuous quality improvement (CQI) management system based on the Toyota production system (TPS) that has been evolving for over 70 years. Its origins go back much further and are heavily influenced by the work of W Edwards Deming and the scientific method that forms the basis of most quality management systems. Lean has two fundamental elements--a systematic approach to process improvement by removing waste in order to maximise value for the end-user of the service and a commitment to respect, challenge and develop the people who work within the service to create a culture of continuous improvement. Lean principles have been applied to a growing number of Healthcare systems throughout the world to improve the quality and cost-effectiveness of services for patients and a number of laboratories from all the pathology disciplines have used Lean to shorten turnaround times, improve quality (reduce errors) and improve productivity. Increasingly, models used to plan and implement large scale change in healthcare systems, including the National Health Service (NHS) change model, have evidence-based improvement methodologies (such as Lean CQI) as a core component. Consequently, a working knowledge of improvement methodology will be a core skill for Pathologists involved in leadership and management.

Packages of participation: Swedish employees' experience of Lean depends on how they are involved.

Science.gov (United States)

Brännmark, Mikael; Holden, Richard J

2013-01-01

Lean Production is a dominant approach in Swedish and global manufacturing and service industries. Studies of Lean's employee effects are few and contradictory. Employee effects from Lean are likely not uniform. This paper investigates the effect of employees' participation on their experiences of Lean. This study investigated how different packages of employee participation in Lean affected manufacturing workers' experiences of Lean. During 2008-2011, qualitative and quantitative data were collected from Swedish manufacturing companies participating in the national Swedish Lean Production program Produktionslyftet. Data from 129 surveys (28 companies), 39 semi-structured interviews, and 30 reports were analyzed. In the main analysis, comparisons were made of the survey-reported Lean experiences of employees in three groups: temporary group employees (N = 36), who participated in Lean mostly through intermittent projects; continuous group employees (N = 69), who participated through standing improvement groups; and combined group employees (N = 24), who participated in both ways. Continuous group employees had the most positive experience of Lean, followed by the combined group. Temporary group employees had the least positive experiences, being less likely than their counterparts to report that Lean improved teamwork, occupational safety, and change-related learning, decision making, and authority. These findings support the importance of continuous, structured opportunities for participation but raise the possibility that more participation may result in greater workload and role overload, mitigating some benefits of employee involvement. Consequently, companies should consider involving employees in change efforts but should attend to the specific design of participation activities.

Cultural Aspects when Implementing Lean Production and Lean Product Development – Experiences from a Swedish Perspective

Directory of Open Access Journals (Sweden)

Promporn Wangwacharakul

2014-07-01

Full Text Available Lean principles and methods, originating in a Japanese cultural context, have spread to a large number of companies throughout the world. The aim of this case study research is to identify and compare national cultural aspects that influence Lean Production and Lean Product Development implementation in Swedish companies. Data were collected through questionnaires, interviews and an industrial workshop with Swedish Lean practitioners. The study shows that some sub-areas in Lean, such as value definition, control systems, leadership, team development, knowledge management, and strategies, are highly dependent on contextual factors related to human, cultural and organizational aspects. These are related to the national culture and should be considered to a higher extent for successful sustainable implementation of Lean in different cultural contexts. As for implementing Lean in Sweden, national cultural characteristics, such as individualism, autonomy and supportive management style fit well with Lean thinking.

Testing machine for fatigue crack kinetic investigation in specimens under bending

International Nuclear Information System (INIS)

Panasyuk, V.V.; Ratych, L.V.; Dmytrakh, I.N.

1978-01-01

A kinematic diagram of testing mashine for the investigation of fatigue crack kinetics in prismatic specimens, subjected to pure bending is described. Suggested is a technique of choosing an optimum ratio of the parameters of ''the testing machine-specimen'' system, which provide the stabilization of the stress intensity coefficient for a certain region of crack development under hard loading. On the example of the 40KhS and 15Kh2MFA steel specimens the pliability of the machine constructed according to the described diagram and designed for the 30ONxm maximum bending moment. The results obtained can be used in designing of the testing machines for studying pure bending under hard loading and in choosing the sizes of specimens with rectangular cross sections for investigations into the kinetics of the fatigue crack

Serum Predictors of Percent Lean Mass in Young Adults.

Science.gov (United States)

Lustgarten, Michael S; Price, Lori L; Phillips, Edward M; Kirn, Dylan R; Mills, John; Fielding, Roger A

2016-08-01

Lustgarten, MS, Price, LL, Phillips, EM, Kirn, DR, Mills, J, and Fielding, RA. Serum predictors of percent lean mass in young adults. J Strength Cond Res 30(8): 2194-2201, 2016-Elevated lean (skeletal muscle) mass is associated with increased muscle strength and anaerobic exercise performance, whereas low levels of lean mass are associated with insulin resistance and sarcopenia. Therefore, studies aimed at obtaining an improved understanding of mechanisms related to the quantity of lean mass are of interest. Percent lean mass (total lean mass/body weight × 100) in 77 young subjects (18-35 years) was measured with dual-energy x-ray absorptiometry. Twenty analytes and 296 metabolites were evaluated with the use of the standard chemistry screen and mass spectrometry-based metabolomic profiling, respectively. Sex-adjusted multivariable linear regression was used to determine serum analytes and metabolites significantly (p ≤ 0.05 and q ≤ 0.30) associated with the percent lean mass. Two enzymes (alkaline phosphatase and serum glutamate oxaloacetate aminotransferase) and 29 metabolites were found to be significantly associated with the percent lean mass, including metabolites related to microbial metabolism, uremia, inflammation, oxidative stress, branched-chain amino acid metabolism, insulin sensitivity, glycerolipid metabolism, and xenobiotics. Use of sex-adjusted stepwise regression to obtain a final covariate predictor model identified the combination of 5 analytes and metabolites as overall predictors of the percent lean mass (model R = 82.5%). Collectively, these data suggest that a complex interplay of various metabolic processes underlies the maintenance of lean mass in young healthy adults.

Diccionario Lean Manufacturing

OpenAIRE

Muñoz Ellner, Sarah María

2016-01-01

El Diccionario Bilingüe de Lean Manufacturing pretende ser un instrumento de apoyo a todo aquel que tenga la responsabilidad de planear, ejecutar o simplemente algún interés con las actividades de Lean Manufacturing, aportando así también conceptos claros tanto en castellano como en inglés, con el fin de entender de forma integral el alcance mismo que puede llegar a tener dicha filosofía, al igual que se proporcionara una serie de siglas y herramientas para la implementación del Lean Manufact...

Lean management beyond manufacturing a holistic approach

CERN Document Server

Bhasin, Sanjay

2015-01-01

Exploring Lean manufacturing in a holistic manner, this book helps organizations to implement Lean principles successfully by offering theoretical, empirical and practical knowledge. It empirically demonstrates how a successful Lean initiative can improve organizational efficiency, and incorporates valuable primary research to substantiate findings. It argues that Lean principles need to be applied throughout the value chain in order to be successful , and suggests that these tools need to be aligned with culture and change management. Chapters examine issues including Lean cultures, impediments to Lean, Lean and performance measurement, and the impact of Lean. Viewing Lean as a never-ending journey, this book provides a valuable resource to practising Lean managers, and specialist researchers and students, and also offers an important reference for organizations embarking on their Lean voyage.

[Lean logistics management in healthcare: a case study].

Science.gov (United States)

Aguilar-Escobar, V G; Garrido-Vega, P

2013-01-01

To study the applicability of the principles of Lean Production to manage the supply chain of a hospital. In particular, to determine which Lean practices and principles are applicable, the benefits obtained and the main barriers for its implementation. Managing the hospital supply chain is an important issue, both for its effect on the quality of care and its impact on costs. This study is based on a case study. 2005-10. Hospital Virgen Macarena in Seville. Process of implementing a comprehensive logistics management plan based on Lean principles and technological investments. The implementation of the comprehensive plan has reduced inventory, decreased lead times and improved service quality. Also, there have been other important improvements: enhanced employee satisfaction and increased staff productivity, both dedicated to health and the logistics. The experience analysed has shown the applicability and appropriateness of Lean principles and some of its techniques in managing the logistics of hospitals. It also identifies some of the main difficulties that may arise. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

Lean approach in knowledge work

Directory of Open Access Journals (Sweden)

Hanna Kropsu-Vehkapera

2018-05-01

Full Text Available Purpose: Knowledge work productivity is a key area of improvement for many organisations. Lean approach is a sustainable way to achieve operational excellence and can be applied in many areas. The purpose of this novel study is to examine the potential of using lean approach for improving knowledge work practices. Design/methodology/approach: A systematic literature review has been carried out to study how lean approach is realised in knowledge work. The research is conceptual in nature and draws upon earlier research findings. Findings: This study shows that lean studies’ in knowledge work is an emerging research area. This study documents the methods and practices implemented in knowledge work to date, and presents a knowledge work continuum, which is an essential framework for effective lean approach deployment and to frame future research focus in knowledge work productivity. Research limitations/implications: This study structures the concept of knowledge work and outlines a concrete concept derived from earlier literature. The study summarises the literature on lean in knowledge work and highlights, which methods are used. More research is needed to understand how lean can be implemented in complex knowledge work environment and not only on the repetitive knowledge work. The limitations of this research are due to the limited availability of previous research. Practical implications: To analyse the nature of knowledge work, we implicate the areas where lean methods especially apply to improving knowledge work productivity. When applying lean in knowledge work context the focus should be using the people better and improving information flow. Originality/value: This study focuses on adapting lean methods into a knowledge work context and summarises earlier research done in this field. The study discusses the potential to improve knowledge work productivity by implementing lean methods and presents a unique knowledge work continuum to

Lean and Information Technology Toolkit

Science.gov (United States)

The Lean and Information Technology Toolkit is a how-to guide which provides resources to environmental agencies to help them use Lean Startup, Lean process improvement, and Agile tools to streamline and automate processes.

Cull sow knife-separable lean content evaluation at harvest and lean mass content prediction equation development.

Science.gov (United States)

Abell, Caitlyn E; Stalder, Kenneth J; Hendricks, Haven B; Fitzgerald, Robert F

2012-07-01

The objectives of this study were to develop a prediction equation for carcass knife-separable lean within and across USDA cull sow market weight classes (MWC) and to determine carcass and individual primal cut knife separable lean content from cull sows. There were significant percent lean and fat differences in the primal cuts across USDA MWC. The two lighter USDA MWC had a greater percent carcass lean and lower percent fat compared to the two heavier MWC. In general, hot carcass weight explained the majority of carcass lean variation. Additionally, backfat was a significant variation source when predicting cull sow carcass lean. The findings support using a single lean prediction equation across MWC to assist processors when making cull sow purchasing decisions and determine the mix of animals from various USDA MWC that will meet their needs when making pork products with defined lean:fat content. Copyright © 2012 Elsevier Ltd. All rights reserved.

Management simulations for Lean healthcare: exploiting the potentials of role-playing.

Science.gov (United States)

Barnabè, Federico; Giorgino, Maria Cleofe; Guercini, Jacopo; Bianciardi, Caterina; Mezzatesta, Vincenzo

2018-04-09

Purpose The purpose of this paper is to investigate the potentials of role-playing (RP) both in training healthcare (HC) professionals to implement tools and improvement actions based on Lean principles, and in supporting group discussion and the sharing of different competencies for the development of Lean HC. Design/methodology/approach The paper presents the case study of an RP simulation called LEAN HEALTHCARE LAB, which is used to train HC professionals at Siena University Hospital. The paper reports and discusses the results of a specific two-day simulation session and of a questionnaire that was distributed to gather feedback from the participants. Findings The paper verifies the potentials of RP to be a powerful educational and training tool that is able to stimulate the HC participants to apply Lean thinking principles and share their competencies in collaborative decision-making processes. Research limitations/implications The study provides data in reference to one single simulation session, although the game has already been applied several times in different HC organizations with very similar outcomes. Moreover, a more in-depth analysis of players' perceptions and decisions could be performed using different tools in addition to the adopted questionnaire. Practical implications RP games (RPGs) are effective training and educational tools for HC professionals. They offer benefits and learning conditions which are definitely different if compared with more conventional education programs for HC professionals. Originality/value While previous studies have extensively discussed the potentialities of RPG and simulations in training programs, only a few articles have discussed the RP adoption for Lean thinking and even less to educate HC professionals on Lean principles and tools.

The Impact of Lean Six Sigma on the Overall Results of Companies

Directory of Open Access Journals (Sweden)

Corina DUMITRESCU

2011-12-01

Full Text Available Lean Six Sigma represents a management approach for driving innovating processes inside a company in order to achieve superior results. It involves a practical analysis based on facts, aiming the innovation and growth, not only the efficiency of processes. It is a long term process of gradual and continuous improvement. The application of Lean Six Sigma in companies led to attaining superior financial performance by addressing new needs, by differentiating the products and services or by adjusting the business lines to new processes. Quality is more than making things without errors. It is about making a product or service meet the individual perception of a customer about the quality or value. Therefore, in what regards Lean Six Sigma, the concern is not only to "do the things right" but also to "do the right things right". We focus on the impact of implementing the Lean Six Sigma approach on companies, seeking for what changes and benefits it brings. The key elements it aims at are achieving the best quality, the lowest cost, getting the shortest lead-time, stressing on waste elimination. The requirements of a company for its implementation and the strategy to obtain the maximum practical outcome are investigated. Furthermore, we conduct a comparison analysis with the other methods of the total quality management and see why Lean Six Sigma is a more desirable approach.

Controlling Lean Manufacturing in Multidivisional Organisations : Highlighting Local Interests and Contraints

NARCIS (Netherlands)

van der Steen, Martijn; Tillema, Sandra

2018-01-01

Purpose: This paper addresses the impact of a multidivisional structure on the implementation of lean manufacturing. It investigates how the controls employed by the corporate level impact the local implementation of lean manufacturing. Design/methodology/approach: The paper reports on case studies

Investigating the connections between health lean management and clinical risk management.

Science.gov (United States)

Crema, Maria; Verbano, Chiara

2015-01-01

The purpose of this paper is to investigate connections and overlaps between health lean management (HLM) and clinical risk management (CRM) understanding whether and how these two approaches can be combined together to pursue efficiency and patient safety improvements simultaneously. A systematic literature review has been carried out. Searching in academic databases, papers that focus not only on HLM, but also on clinical errors and risk reduction, were included. The general characteristics of the selected papers were analysed and a content analysis was conducted. In most of the papers, pursing objectives of HLM and CRM and adopting tools and practices of both approaches, results of quality and, particularly, of safety improvements were obtained. A two-way arrow between HLM and CRM emerged but so far, none of the studies has been focused on the relationship between HLM and CRM. Results highlight an emerging research stream, with many useful theoretical and practical implications and opportunities for further research.

Lean Production : Werkzeuge zur Realisierung

OpenAIRE

Binner, Hartmut F.

2008-01-01

INHALT: l. Einleitung und Standortbestimmung 2. Japanische Wertvorstellungen 3. Inhalte der Lean Production 4. Fertigungssegmentierung 5. Informationsmanagement mit CIM- und Logistik-Komponenten 6. Logistikgerechte Strukturen der Lean Production 7. Realisierung der Lean Production 8. Zusammenfassung

Human-Assisted Machine Information Exploitation: a crowdsourced investigation of information-based problem solving

Science.gov (United States)

Kase, Sue E.; Vanni, Michelle; Caylor, Justine; Hoye, Jeff

2017-05-01

The Human-Assisted Machine Information Exploitation (HAMIE) investigation utilizes large-scale online data collection for developing models of information-based problem solving (IBPS) behavior in a simulated time-critical operational environment. These types of environments are characteristic of intelligence workflow processes conducted during human-geo-political unrest situations when the ability to make the best decision at the right time ensures strategic overmatch. The project takes a systems approach to Human Information Interaction (HII) by harnessing the expertise of crowds to model the interaction of the information consumer and the information required to solve a problem at different levels of system restrictiveness and decisional guidance. The design variables derived from Decision Support Systems (DSS) research represent the experimental conditions in this online single-player against-the-clock game where the player, acting in the role of an intelligence analyst, is tasked with a Commander's Critical Information Requirement (CCIR) in an information overload scenario. The player performs a sequence of three information processing tasks (annotation, relation identification, and link diagram formation) with the assistance of `HAMIE the robot' who offers varying levels of information understanding dependent on question complexity. We provide preliminary results from a pilot study conducted with Amazon Mechanical Turk (AMT) participants on the Volunteer Science scientific research platform.

Lean Application to Manufacturing Ramp-Up

DEFF Research Database (Denmark)

Christensen, Irene; Rymaszewska, Anna

2016-01-01

. Abstracting from the extant literature, the authors considered the competitiveness of manufacturing companies from two principal perspectives: the leanness of the ramp-up process and the new-value creation of quality managers. While much of the literature fails to acknowledge that the roots of lean actually......This article provides a theoretical overview of the concepts of lean and manufacturing ramp-up in an attempt to conceptualize the strategic areas in which lean philosophy and principles can be applied for continuous improvements. The application of lean principles during the final stage of a new...... product development process, that is, the ramp-up process, is a critical, early enabler of lean manufacturing. The manufacturing strategy literature conceptualizes a state of “leanness in operations,” which can consolidate both the concepts of lean and manufacturing ramp-up, providing a dual perspective...

How does lean work in emergency care? A case study of a lean-inspired intervention at the Astrid Lindgren Children's hospital, Stockholm, Sweden.

Science.gov (United States)

Mazzocato, Pamela; Holden, Richard J; Brommels, Mats; Aronsson, Håkan; Bäckman, Ulrika; Elg, Mattias; Thor, Johan

2012-02-01

There is growing interest in applying lean thinking in healthcare, yet, there is still limited knowledge of how and why lean interventions succeed (or fail). To address this gap, this in-depth case study examines a lean-inspired intervention in a Swedish pediatric Accident and Emergency department. We used a mixed methods explanatory single case study design. Hospital performance data were analyzed using analysis of variance (ANOVA) and statistical process control techniques to assess changes in performance one year before and two years after the intervention. We collected qualitative data through non-participant observations, semi-structured interviews, and internal documents to describe the process and content of the lean intervention. We then analyzed empirical findings using four theoretical lean principles (Spear and Bowen 1999) to understand how and why the intervention worked in its local context as well as to identify its strengths and weaknesses. Improvements in waiting and lead times (19-24%) were achieved and sustained in the two years following lean-inspired changes to employee roles, staffing and scheduling, communication and coordination, expertise, workspace layout, and problem solving. These changes resulted in improvement because they: (a) standardized work and reduced ambiguity, (b) connected people who were dependent on one another, (c) enhanced seamless, uninterrupted flow through the process, and (d) empowered staff to investigate problems and to develop countermeasures using a "scientific method". Contextual factors that may explain why not even greater improvement was achieved included: a mismatch between job tasks, licensing constraints, and competence; a perception of being monitored, and discomfort with inter-professional collaboration. Drawing on Spear and Bowen's theoretical propositions, this study explains how a package of lean-like changes translated into better care process management. It adds new knowledge regarding how lean

LEAN thinking in Finnish healthcare.

Science.gov (United States)

Jorma, Tapani; Tiirinki, Hanna; Bloigu, Risto; Turkki, Leena

2016-01-01

Purpose - The purpose of this study is to evaluate how LEAN thinking is used as a management and development tool in the Finnish public healthcare system and what kind of outcomes have been achieved or expected by using it. The main focus is in managing and developing patient and treatment processes. Design/methodology/approach - A mixed-method approach incorporating the Webropol survey was used. Findings - LEAN is quite a new concept in Finnish public healthcare. It is mainly used as a development tool to seek financial savings and to improve the efficiency of patient processes, but has not yet been deeply implemented. However, the experiences from LEAN initiatives have been positive, and the methodology is already quite well-known. It can be concluded that, because of positive experiences from LEAN, the environment in Finnish healthcare is ready for the deeper implementation of LEAN. Originality/value - This paper evaluates the usage of LEAN thinking for the first time in the public healthcare system of Finland as a development tool and a management system. It highlights the implementation and achieved results of LEAN thinking when used in the healthcare environment. It also highlights the expectations for LEAN thinking in Finnish public healthcare.

Relationship Between Lean Production and Operational Performance in the Manufacturing Industry

Science.gov (United States)

Rasi, Raja Zuraidah R. M.; Syamsyul Rakiman, Umol; Ahmad, Md Fauzi Bin

2015-05-01

Nowadays, more and more manufacturing firms have started to implement lean production system in their operations. Lean production viewed as one of the mechanism to maintain the organisation's position and to compete globally. However, many fail to apply the lean concepts successfully in their operations. Based on previous studies, implementation of lean production in the manufacturing industry is more focused on the relationship between Lean and Operational Performance of one dimension only. Therefore, this study attempted to examine the relationship between Lean Production (LP) and Operational Performance in 4 dimensions which are quality, delivery, cost and flexibility. This study employed quantitative study using questionnaires. Data was collected from 50 manufacturing industries. The data was analysed using Statistical Package for Social Science (SPSS) 22.0. This study is hoped to shed new understanding on the concept of Lean Production (LP) in regards of Operational Performance covering the 4 dimensions.

Lean Design and Management for Manufactoring

OpenAIRE

NIU, Zhanwen

2009-01-01

Most enterprises inducting lean production were confined by the innate limitations of existing production systems, which make it difficult to fulfill lean production comprehensively. To solve this problem, the theory of lean design and management for the manufacturing enterprise lifecycle was proposed. First, the necessities of lean design were analyzed and its theoretical system was established; second, the principles, process, methods and tools for lean design was introduced. Techniques and...

Simulation of lean premixed turbulent combustion

International Nuclear Information System (INIS)

Bell, J; Day, M; Almgren, A; Lijewski, M; Rendleman, C; Cheng, R; Shepherd, I

2006-01-01

There is considerable technological interest in developing new fuel-flexible combustion systems that can burn fuels such as hydrogen or syngas. Lean premixed systems have the potential to burn these types of fuels with high efficiency and low NOx emissions due to reduced burnt gas temperatures. Although traditional Scientific approaches based on theory and laboratory experiment have played essential roles in developing our current understanding of premixed combustion, they are unable to meet the challenges of designing fuel-flexible lean premixed combustion devices. Computation, with its ability to deal with complexity and its unlimited access to data, has the potential for addressing these challenges. Realizing this potential requires the ability to perform high fidelity simulations of turbulent lean premixed flames under realistic conditions. In this paper, we examine the specialized mathematical structure of these combustion problems and discuss simulation approaches that exploit this structure. Using these ideas we can dramatically reduce computational cost, making it possible to perform high-fidelity simulations of realistic flames. We illustrate this methodology by considering ultra-lean hydrogen flames and discuss how this type of simulation is changing the way researchers study combustion

A Cooperative Approach to Virtual Machine Based Fault Injection

Energy Technology Data Exchange (ETDEWEB)

Naughton III, Thomas J [ORNL; Engelmann, Christian [ORNL; Vallee, Geoffroy R [ORNL; Aderholdt, William Ferrol [ORNL; Scott, Stephen L [Tennessee Technological University (TTU)

2017-01-01

Resilience investigations often employ fault injection (FI) tools to study the effects of simulated errors on a target system. It is important to keep the target system under test (SUT) isolated from the controlling environment in order to maintain control of the experiement. Virtual machines (VMs) have been used to aid these investigations due to the strong isolation properties of system-level virtualization. A key challenge in fault injection tools is to gain proper insight and context about the SUT. In VM-based FI tools, this challenge of target con- text is increased due to the separation between host and guest (VM). We discuss an approach to VM-based FI that leverages virtual machine introspection (VMI) methods to gain insight into the target s context running within the VM. The key to this environment is the ability to provide basic information to the FI system that can be used to create a map of the target environment. We describe a proof- of-concept implementation and a demonstration of its use to introduce simulated soft errors into an iterative solver benchmark running in user-space of a guest VM.

Lean With a Human Face

DEFF Research Database (Denmark)

Hasle, Peter; Jensen, Per Langaa

2008-01-01

The consequences for quality of work of lean manufacturing is discussed in the international litterature, and several authors suggest increased work speed, stress, and muscoskeletal diseases as a consequence of lean. The Danish experience with lean has been studied through interviews with managers...

The challenges of lean manufacturing implementation in kitting assembly

Science.gov (United States)

Fansuri, A. F. H.; Rose, A. N. M.; Nik Mohamed, N. M. Z.; Ahmad, H.

2017-10-01

Literature studies shows that lean manufacturing goes way back with the original founder Eli Whitney in year 1799. The main purpose of lean manufacturing is to identify and eliminate waste in production. The application of lean manufacturing can be carried out in any industrial processes with regards to the understanding of lean principles, theories and practices. Kitting is one of the important aspects in a successful production. The continuous supply of materials from store to production has to be systematic and able to achieve lean standard for it to be successful. The objective of this paper is to review the implementation of lean manufacturing in kitting assembly. Previous papers show that, the implementation of lean manufacturing in kitting assembly may be beneficial to the organization such as reduce in space occupancy, part shortages, lead time and manpower. Based on previous research, some industries may tend to change between kitting and line stocking which are due to lack of understanding when implementing kitting and causes longer lead time and materials overflow in store. With a proper understanding on what to kit, where to kit, how to kit, why to kit and who kits the material with a standardised process flow may ensure the success of kitting.

Machine Learning-based Virtual Screening and Its Applications to Alzheimer's Drug Discovery: A Review.

Science.gov (United States)

Carpenter, Kristy A; Huang, Xudong

2018-06-07

Virtual Screening (VS) has emerged as an important tool in the drug development process, as it conducts efficient in silico searches over millions of compounds, ultimately increasing yields of potential drug leads. As a subset of Artificial Intelligence (AI), Machine Learning (ML) is a powerful way of conducting VS for drug leads. ML for VS generally involves assembling a filtered training set of compounds, comprised of known actives and inactives. After training the model, it is validated and, if sufficiently accurate, used on previously unseen databases to screen for novel compounds with desired drug target binding activity. The study aims to review ML-based methods used for VS and applications to Alzheimer's disease (AD) drug discovery. To update the current knowledge on ML for VS, we review thorough backgrounds, explanations, and VS applications of the following ML techniques: Naïve Bayes (NB), k-Nearest Neighbors (kNN), Support Vector Machines (SVM), Random Forests (RF), and Artificial Neural Networks (ANN). All techniques have found success in VS, but the future of VS is likely to lean more heavily toward the use of neural networks - and more specifically, Convolutional Neural Networks (CNN), which are a subset of ANN that utilize convolution. We additionally conceptualize a work flow for conducting ML-based VS for potential therapeutics of for AD, a complex neurodegenerative disease with no known cure and prevention. This both serves as an example of how to apply the concepts introduced earlier in the review and as a potential workflow for future implementation. Different ML techniques are powerful tools for VS, and they have advantages and disadvantages albeit. ML-based VS can be applied to AD drug development. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

Science.gov (United States)

De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

2015-01-01

Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

Lean principles adoption in environmental management system (EMS - ISO 14001

Directory of Open Access Journals (Sweden)

Perumal Puvanasvaran

2012-12-01

Full Text Available Purpose: The purpose of this study is to examine the characteristic of the lean principles into ISO 14001 and to propose linkage of the lean principles and ISO 14001.Design/methodology/approach: To achieve the objective of the study, literature survey and quantitative research method using questionnaires survey are used.Findings and Originality/value: The findings of this study confirm that ISO 14001 certified company adopted lean production practices.  The study also proves that lean principles have positive and significant relationship with ISO 14001 EMS and the linkage can be made between lean principles and ISO 14001 to achieve Continual Improvement.Research limitations/implications: The small sizes of the sample of the participating companies are the main limitations of this study and this research mainly focuses on the manufacturing environment and services industry.Practical implications: This research show that all ISO 14001 companies do adopt at least one lean production practices and the main findings are lean principles has positive and highly significant relationship with ISO 14001 requirements.  This is because the integration of lean principles into ISO 14001 will serve practical methods for ISO14001 EMS to achieve the continual improvement.Originality/value: This research is amongst the first to study the combined lean principles with ISO 1400.  Based on the current situation, there is no integration within this two management system. 

Lean leadership: an ethnographic study

NARCIS (Netherlands)

Aij, K.H.; Visse, M.A.; Widdershoven, G.A.M.

2015-01-01

Purpose – The purpose of this study is to provide a critical analysis of contemporary Lean leadership in the context of a healthcare practice. The Lean leadership model supports professionals with a leading rolein implementing Lean.This article presents a case study focusing specifcally on

Implementation analysis of lean enablers for managing engineering programs

DEFF Research Database (Denmark)

von Arnim, Joachim; Oehmen, Josef; Rebentisch, Eric

2014-01-01

This paper presents research to improve the applicability of the Lean Enablers and consists of two parts. The first is a case study of a very successful project management maturity improvement initiative at Siemens Industry Sector’s Industry Automation division in the US. It views the initiative...... from the perspective of the Lean Enablers [Oehmen 2012] and is based on information from [Sopko 2012a], [Sopko 2012b], [Sopko 2010], [Sopko 2009], interviews, internal documentation, and the used MSP program management methodology [UK 2011]. The analysis of Lean Enablers incorporated in the MSP...

Contribution to the Optimization of Strategy of Maintenance by Lean Six Sigma

Science.gov (United States)

Youssouf, Ayadi; Rachid, Chaib; Ion, Verzea

The efficiency of the maintenance of the industrial systems is a major economic stake for their business concern. The main difficulties and the sources of ineffectiveness live in the choice of the actions of maintenance especially when the machine plays a vital role in the process of production. But as Algeria has embarked on major infrastructure projects in transport, housing, automobile, manufacturing industry and construction (factories, housing, highway, subway, tram, etc.) requiring new implications on maintenance strategies that meet industry requirements imposed by the exploitation. From then on and seen the importance of the maintenance on the economic market and sound impacts on the performances of the installations, methods of optimization were developed. For this purpose, to ensure the survival of businesses, be credible, contributing and competitive in the market, maintenance services must continually adapt to the progress of technical areas, technological and organizational even help maintenance managers to construct or to modify maintenance strategies, objective of this work. Our contribution in this work focuses on the optimization of maintenance for industrial systems by the use of Lean six Sigma bases. Lean Six Sigma is a method of improving the quality and profitability based on mastering statically of process and it is also a management style that based on a highly regulated organization dedicated to managing project. The method is based on five main steps summarized in the acronym (DMAIC): Define Measure, Analyze, Improve and Control. Application of the method on the maintenance processes with using maintenance methods during the five phases of the method will help to reduce costs and losses in order to strive for optimum results in terms of profit and quality.

An experimental investigation of pulsed laser-assisted machining of AISI 52100 steel

Science.gov (United States)

Panjehpour, Afshin; Soleymani Yazdi, Mohammad R.; Shoja-Razavi, Reza

2014-11-01

Grinding and hard turning are widely used for machining of hardened bearing steel parts. Laser-assisted machining (LAM) has emerged as an efficient alternative to grinding and hard turning for hardened steel parts. In most cases, continuous-wave lasers were used as a heat source to cause localized heating prior to material removal by a cutting tool. In this study, an experimental investigation of pulsed laser-assisted machining of AISI 52100 bearing steel was conducted. The effects of process parameters (i.e., laser mean power, pulse frequency, pulse energy, cutting speed and feed rate) on state variables (i.e., material removal temperature, specific cutting energy, surface roughness, microstructure, tool wear and chip formation) were investigated. At laser mean power of 425 W with frequency of 120 Hz and cutting speed of 70 m/min, the benefit of LAM was shown by 25% decrease in specific cutting energy and 18% improvement in surface roughness, as compared to those of the conventional machining. It was shown that at constant laser power, the increase of laser pulse energy causes the rapid increase in tool wear rate. Pulsed laser allowed efficient control of surface temperature and heat penetration in material removal region. Examination of the machined subsurface microstructure and microhardness profiles showed no change under LAM and conventional machining. Continuous chips with more uniform plastic deformation were produced in LAM.

Investigation of a Co-Axial Dual-Mechanical Ports Flux-Switching Permanent Magnet Machine for Hybrid Electric Vehicles

Directory of Open Access Journals (Sweden)

Wei Hua

2015-12-01

Full Text Available In this paper, a co-axial dual-mechanical ports flux-switching permanent magnet (CADMP-FSPM machine for hybrid electric vehicles (HEVs is proposed and investigated, which is comprised of two conventional co-axial FSPM machines, namely one high-speed inner rotor machine and one low-speed outer rotor machine and a non-magnetic ring sandwiched in between. Firstly, the topology and operation principle of the CADMP-FSPM machine are introduced; secondly, the control system of the proposed electronically-controlled continuously-variable transmission (E-CVT system is given; thirdly, the key design specifications of the CADMP-FSPM machine are determined based on a conventional dual-mechanical ports (DMP machine with a wound inner rotor. Fourthly, the performances of the CADMP-FSPM machine and the normal DMP machine under the same overall volume are compared, and the results indicate that the CADMP-FSPM machine has advantages over the conventional DMP machine in the elimination of brushes and slip rings, improved thermal dissipation conditions for the inner rotor, direct-driven operation, more flexible modes, lower cogging torque and torque ripple, lower total harmonic distortion (THD values of phase PM flux linkage and phase electro-motive force (EMF, higher torque output capability and is suitable for the E-CVT systems. Finally, the pros and cons of the CADMP-FSPM machine are highlighted. This paper lays a theoretical foundation for further research on CADMP-FSPM machines used for HEVs.

Human Behavior Based Exploratory Model for Successful Implementation of Lean Enterprise in Industry

Science.gov (United States)

Sawhney, Rupy; Chason, Stewart

2005-01-01

Currently available Lean tools such as Lean Assessments, Value Stream Mapping, and Process Flow Charting focus on system requirements and overlook human behavior. A need is felt for a tool that allows one to baseline personnel, determine personnel requirements and align system requirements with personnel requirements. Our exploratory model--The…

Ares Launch Vehicles Lean Practices Case Study

Science.gov (United States)

Doreswamy, Rajiv, N.; Self, Timothy A.

2008-01-01

This viewgraph presentation describes test strategies and lean philisophies and practices that are applied to Ares Launch Vehicles. The topics include: 1) Testing strategy; 2) Lean Practices in Ares I-X; 3) Lean Practices Applied to Ares I-X Schedule; 4) Lean Event Results; 5) Lean, Six Sigma, and Kaizen Practices in the Ares Projects Office; 6) Lean and Kaizen Success Stories; and 7) Ares Six Sigma Practices.

The Integration of Project-Based Methodology into Teaching in Machine Translation

Science.gov (United States)

Madkour, Magda

2016-01-01

This quantitative-qualitative analytical research aimed at investigating the effect of integrating project-based teaching methodology into teaching machine translation on students' performance. Data was collected from the graduate students in the College of Languages and Translation, at Imam Muhammad Ibn Saud Islamic University, Riyadh, Saudi…

Packages of participation: Swedish employees’ experience of Lean depends on how they are involved

Science.gov (United States)

Brännmark, Mikael; Holden, Richard J.

2013-01-01

Background Lean Production is a dominant approach in Swedish and global manufacturing and service industries. Studies of Lean’s employee effects are few and contradictory. Purpose Employee effects from Lean are likely not uniform. This paper investigates the effect of employees' participation on their experiences of Lean. Method This study investigated how different packages of employee participation in Lean affected manufacturing workers’ experiences of Lean. During 2008–2011, qualitative and quantitative data were collected from Swedish manufacturing companies participating in the national Swedish Lean Production program Produktionslyftet. Data from 129 surveys (28 companies), 39 semi-structured interviews, and 30 reports were analyzed. In the main analysis, comparisons were made of the survey-reported Lean experiences of employees in three groups: temporary group employees (N = 36), who participated in Lean mostly through intermittent projects; continuous group employees (N = 69), who participated through standing improvement groups; and combined group employees (N = 24), who participated in both ways. Results Continuous group employees had the most positive experience of Lean, followed by the combined group. Temporary group employees had the least positive experiences, being less likely than their counterparts to report that Lean improved teamwork, occupational safety, and change-related learning, decision making, and authority. Conclusions These findings support the importance of continuous, structured opportunities for participation but raise the possibility that more participation may result in greater workload and role overload, mitigating some benefits of employee involvement. Consequently, companies should consider involving employees in change efforts but should attend to the specific design of participation activities. PMID:24665370

Lean software development in action

CERN Document Server

Janes, Andrea

2014-01-01

This book illustrates how goal-oriented, automated measurement can be used to create Lean organizations and to facilitate the development of Lean software, while also demonstrating the practical implementation of Lean software development by combining tried and trusted tools. In order to be successful, a Lean orientation of software development has to go hand in hand with a company's overall business strategy. To achieve this, two interrelated aspects require special attention: measurement and experience management. In this book, Janes and Succi provide the necessary knowledge to establish "

Lean body mass and creatine kinase are associated with reduced inflammation in obesity.

Science.gov (United States)

Bekkelund, Svein I; Jorde, Rolf

2017-11-01

Obesity is associated with inflammation, but the role of lean mass and creatine kinase (CK) on the inflammatory process is less known. We investigated the associations between lean mass, CK and fat mass upon inflammatory parameters in an overweight and obese adult population. Body composition examined by dual-energy X-ray absorptiometry, high-sensitivity C-reactive protein (hs-CRP), erythrocyte sedimentation rate (ESR), CK and supplementary clinical parameters were measured in 454 overweight and obese individuals. This is a secondary analysis from a cohort of obese individuals treated with Vitamin D. Mean age was 47·6 ± 11·4 years and mean body mass index 34·6 ± 3·9 kg/m 2 . Lean mass correlated negatively with hs-CRP (r = -0·127, P = 0·042) and ESR (r = -0·381, P lean mass in the lower ESR quartile was significantly higher than in the upper quartile (P lean mass and CK in an overweight and obese population. Hypothetically, lean mass has a favourable effect on obesity-related inflammation, and CK may play a role as an inhibitor of inflammation in obesity. © 2017 Stichting European Society for Clinical Investigation Journal Foundation.

Lean Management

OpenAIRE

Picot, Arnold

1994-01-01

In this article the possibility of increase of competitiveness of the domestic enterprises by means of Lean management system is considered, and also the analysis of introduction of the mentioned system at the Russian enterprises is carried out. Besides, the key conditions necessary for successful introduction of system are presented. Lean management is a world-spread way of solving the problems, aimed at making the company competitive; it is the organized activity of staff of the company, fo...

A Review of Virtual Machine Attack Based on Xen

Directory of Open Access Journals (Sweden)

Ren xun-yi

2016-01-01

Full Text Available Virtualization technology as the foundation of cloud computing gets more and more attention because the cloud computing has been widely used. Analyzing the threat with the security of virtual machine and summarizing attack about virtual machine based on XEN to predict visible security hidden recently. Base on this paper can provide a reference for the further research on the security of virtual machine.

The effect of covert changes in energy density of preloads on subsequent ad libitum energy intake in lean and obese human subjects.

Science.gov (United States)

Durrant, M L; Royston, J P; Wloch, R T; Garrow, J S

1982-01-01

1. Covert changes in energy intake were made by giving preloads of disguised energy density three times daily to 14 obese and 6 lean subjects. 2. The preloads contained 2.51 MJ (600 kcal)/d on days 2 and 3 and either 3.77 MJ (900 kcal)/d or 1.26 MJ (300 kcal/d) on days 4 and 5 and 1.26 MJ (300 kcal)/d or 3.77 MJ (900 kcal)/d on days 6 and 7. The order of testing was alternated for each subject. 3. Subsequent energy intake at each meal (lunch, dinner and breakfast) was measured with an automated food-dispensing machine. 4. Overall the obese subjects ate significantly less from the machine, 3.28 +/- 1.89 MJ (785 +/- 452 kcal)/d, than the lean subjects, 6.03 +/- 1.26 MJ (1442 +/- 300 kcal)/d. 5. Both groups of subjects adjusted their energy intake in the right direction to counterbalance the effect of the preloads but the lean subjects changed their intake by an average of 0.74 MJ (176 kcal)/d compared with the obese subjects who changed their intake by an average of 0.29 MJ (70 kcal)/d. 6. Although the lean subjects were better at adjusting their energy intake than the obese subjects, regulation was still imprecise relative to the 2.51 MJ (600 kcal)/d difference in energy intake that was imposed. 7. There were no significant differences in hunger or appetite between subjects or test situations.

Textual analysis and machine leaning: Crack unstructured data in finance and accounting

Directory of Open Access Journals (Sweden)

Li Guo

2016-09-01

Full Text Available In finance and accounting, relative to quantitative methods traditionally used, textual analysis becomes popular recently despite of its substantially less precise manner. In an overview of the literature, we describe various methods used in textual analysis, especially machine learning. By comparing their classification performance, we find that neural network outperforms many other machine learning techniques in classifying news category. Moreover, we highlight that there are many challenges left for future development of textual analysis, such as identifying multiple objects within one single document.

How does lean work in emergency care? A case study of a lean-inspired intervention at the Astrid Lindgren Children's hospital, Stockholm, Sweden

Directory of Open Access Journals (Sweden)

Mazzocato Pamela

2012-02-01

Full Text Available Abstract Background There is growing interest in applying lean thinking in healthcare, yet, there is still limited knowledge of how and why lean interventions succeed (or fail. To address this gap, this in-depth case study examines a lean-inspired intervention in a Swedish pediatric Accident and Emergency department. Methods We used a mixed methods explanatory single case study design. Hospital performance data were analyzed using analysis of variance (ANOVA and statistical process control techniques to assess changes in performance one year before and two years after the intervention. We collected qualitative data through non-participant observations, semi-structured interviews, and internal documents to describe the process and content of the lean intervention. We then analyzed empirical findings using four theoretical lean principles (Spear and Bowen 1999 to understand how and why the intervention worked in its local context as well as to identify its strengths and weaknesses. Results Improvements in waiting and lead times (19-24% were achieved and sustained in the two years following lean-inspired changes to employee roles, staffing and scheduling, communication and coordination, expertise, workspace layout, and problem solving. These changes resulted in improvement because they: (a standardized work and reduced ambiguity, (b connected people who were dependent on one another, (c enhanced seamless, uninterrupted flow through the process, and (d empowered staff to investigate problems and to develop countermeasures using a "scientific method". Contextual factors that may explain why not even greater improvement was achieved included: a mismatch between job tasks, licensing constraints, and competence; a perception of being monitored, and discomfort with inter-professional collaboration. Conclusions Drawing on Spear and Bowen's theoretical propositions, this study explains how a package of lean-like changes translated into better care process

How does lean work in emergency care? A case study of a lean-inspired intervention at the Astrid Lindgren Children's hospital, Stockholm, Sweden

Science.gov (United States)

2012-01-01

Background There is growing interest in applying lean thinking in healthcare, yet, there is still limited knowledge of how and why lean interventions succeed (or fail). To address this gap, this in-depth case study examines a lean-inspired intervention in a Swedish pediatric Accident and Emergency department. Methods We used a mixed methods explanatory single case study design. Hospital performance data were analyzed using analysis of variance (ANOVA) and statistical process control techniques to assess changes in performance one year before and two years after the intervention. We collected qualitative data through non-participant observations, semi-structured interviews, and internal documents to describe the process and content of the lean intervention. We then analyzed empirical findings using four theoretical lean principles (Spear and Bowen 1999) to understand how and why the intervention worked in its local context as well as to identify its strengths and weaknesses. Results Improvements in waiting and lead times (19-24%) were achieved and sustained in the two years following lean-inspired changes to employee roles, staffing and scheduling, communication and coordination, expertise, workspace layout, and problem solving. These changes resulted in improvement because they: (a) standardized work and reduced ambiguity, (b) connected people who were dependent on one another, (c) enhanced seamless, uninterrupted flow through the process, and (d) empowered staff to investigate problems and to develop countermeasures using a "scientific method". Contextual factors that may explain why not even greater improvement was achieved included: a mismatch between job tasks, licensing constraints, and competence; a perception of being monitored, and discomfort with inter-professional collaboration. Conclusions Drawing on Spear and Bowen's theoretical propositions, this study explains how a package of lean-like changes translated into better care process management. It adds

Software Support for Optimizing Layout Solution in Lean Production

Directory of Open Access Journals (Sweden)

Naqib Daneshjo

2018-02-01

Full Text Available As progressive managerial styles, the techniques based on "lean thinking" are being increasingly promoted. They are focused on applying lean production concepts to all phases of product lifecycle and also to business environment. This innovative approach strives to eliminate any wasting of resources and shortens the time to respond to customer requirements, including redesigning the structure of the organization’ supply chain. A lean organization is created mainly by employees, their creative potential, knowledge, self-realization and motivation for continuous improvement of the processes and the production systems. A set of tools, techniques and methods of lean production is basically always very similar. Only a form of their presentation or classification into individual phases of the product lifecycle may differ. The authors present the results of their research from the designing phases of production systems to optimize their dispositional solution with software support and 3D simulation and visualization. Modelling is based on use of Tecnomatix's and Photomodeler's progressive software tools and a dynamic model for capacitive dimensioning of more intelligent production system

Lean government: Critical success factors for XBRL-based business-to-government reporting

OpenAIRE

Bharosa, N.; De Winne, C.P.I.; Van Wijk, R.; Janssen, M.F.W.H.A.

2012-01-01

Lean government is all about doing better with less through the use of ICT and the realisation of process improvements. The recently introduced eXtensible Business Reporting Language (XBRL) has shown some initial success in realising lean government. Once data is stored in XBRL format, businesses can transmit it electronically to government for reporting purposes. For businesses, XBRL will increase both corporate accountability and transparency by reducing the time needed to collect, structur...

Establishing a Lean Six Sigma Program in Higher Education

KAUST Repository

Svensson, Carsten; Baessa, Mohamed A.; Bakhsh, Majed M.

2013-01-01

Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

Establishing a Lean Six Sigma Program in Higher Education

KAUST Repository

Svensson, Carsten

2013-09-12

Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

Bringing Lean Six Sigma to the Supply Chain Classroom: A Problem-Based Learning Case

Science.gov (United States)

Miller, Keith E.; Hill, Craig; Miller, Antoinette R.

2016-01-01

The article describes a project that employs problem-based learning (PBL) to teach the Lean Six Sigma (LSS) methodology as part of an undergraduate or graduate business course. It is scalable to a variety of course delivery and schedule formats, and uses data sets that can create distinct problem-solving scenarios for up to 16 student teams. It…

Lean Maintenance Applied to Improve Maintenance Efficiency in Thermoelectric Power Plants

Directory of Open Access Journals (Sweden)

Orlando Duran

2017-10-01

Full Text Available Thermoelectric power plants consist of a set of critical equipment that require high levels of availability and reliability. Due to this, maintenance of these physical assets is gaining momentum in industry. Maintenance is considered as an activity that contributes to improving the availability, efficiency and productivity of each piece of equipment. Several techniques have been used to achieve greater efficiencies in maintenance, among which we can find the lean maintenance philosophy. Despite the wide diffusion of lean maintenance, there is no structured method that supports the prescription of lean tools applied to the maintenance function. This paper presents the experience gathered in two lean maintenance projects in thermoelectric power plants. The application of lean techniques was based on using a previously developed multicriterial decision making process that uses the Fuzzy Analytic Hierarchy Process (AHP methodology to carry out a diagnosis and prescription tasks. That methodology allowed the prescription of the appropriated lean techniques to resolve the main deficiencies in maintenance function. The results of applying such lean tools show that important results can be obtained, making the maintenance function in thermoelectric power plants more efficient and lean.

Investigation of combustion and thermodynamic performance of a lean burn catalytic combustion gas turbine system

International Nuclear Information System (INIS)

Yin Juan; Weng Yiwu

2011-01-01

The goals of this research were to investigate the combustion and thermodynamic performance of a lean burn catalytic combustion gas turbine. The characteristics of lean burn catalytic combustion were investigated by utilising 1D heterogeneous plug flow model which was validated by experiments. The effects of operating parameters on catalytic combustion were numerically analysed. The system models were built in ASPEN Plus and three independent design variables, i.e. compressor pressure ratio (PR), regenerator effectiveness (RE) and turbine inlet temperature (TIT) were selected to analyse the thermodynamic performance of the thermal cycle. The main results show that: simulations from 1D heterogeneous plug flow model can capture the trend of catalytic combustion and describe the behavior of the catalytic monolith in detail. Inlet temperature is the most significant parameter that impacts operation of the catalytic combustor. When TIT and RE are constant, the increase of PR results in lowering the inlet temperature of the catalytic combustor, which results in decreasing methane conversion. The peak thermal efficiency and the optimal PR at a constant TIT increase with the increase of TIT; and at the constant PR, the thermal efficiency increases with the increase of TIT. However, with lower TIT conditions, the optimal PR and the peak efficiency at a constant TIT of the LBCCGT cycle are relative low to that of the conventional cycle. When TIT and PR are constant, the decrease of RE may result in lower methane conversion. The influences of RE on the methane conversion and the thermal efficiency are more significant at higher PRs. The higher thermal efficiency for the lower RE is achieved at lower PR.

The maintenance management for lean organization

Directory of Open Access Journals (Sweden)

Daniel D. GEORGESCU

2010-12-01

Full Text Available The goal of lean maintenance approach is to maintain organization international competitiveness. In the spirit of continuously improvement, in the paper it is shown how by adjusting some Lean manufacturing specific techniques for Total Productive Maintenance (TPM system, was born new maintenance system named Lean TPM. This is a systemic approach with three techniques, which don’t exclude specific techniques of TPM pillars, but complete them: the 7Ss as a critical first step in any improvement program; instantaneous maintenance; improvement setup operations. In the spirit of Lean principle, Lean TPM adjusts overall equipment effectiveness concept for all supply-chain from supplier to customer. Maintaining equipment in its optimal state and continually improving its productivity is the whole strategy behind Lean TPM.

Machine intelligence and knowledge bases

Energy Technology Data Exchange (ETDEWEB)

Furukawa, K

1981-09-01

The basic functions necessary in machine intelligence are a knowledge base and a logic programming language such as PROLOG using deductive reasoning. Recently inductive reasoning based on meta knowledge and default reasoning have been developed. The creative thought model of Lenit is reviewed and the concept of knowledge engineering is introduced. 17 references.

The human side of lean teams.

Science.gov (United States)

Wackerbarth, Sarah B; Strawser-Srinath, Jamie R; Conigliaro, Joseph C

2015-05-01

Organizations use lean principles to increase quality and decrease costs. Lean projects require an understanding of systems-wide processes and utilize interdisciplinary teams. Most lean tools are straightforward, and the biggest barrier to successful implementation is often development of the team aspect of the lean approach. The purpose of this article is to share challenges experienced by a lean team charged with improving a hospital discharge process. Reflection on the experience provides an opportunity to highlight lessons from The Team Handbook by Peter Scholtes and colleagues. To improve the likelihood that process improvement initiatives, including lean projects, will be successful, organizations should consider providing training in organizational change principles and team building. The authors' lean team learned these lessons the hard way. Despite the challenges, the team successfully implemented changes throughout the organization that have had a positive impact. Training to understand the psychology of change might have decreased the resistance faced in implementing these changes. © 2014 by the American College of Medical Quality.

Lean Production Applications in a Manufacturing Company

OpenAIRE

Ali Görener; Humeyra Baser; Ali Turkyilmaz

2013-01-01

Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cyc...

Anodic solubility and electrochemical machining of hard alloys on the base of chromium and titanium carbides

Energy Technology Data Exchange (ETDEWEB)

Davydov, A D; Klepikov, A N; Malofeeva, A N; Moroz, I I

1985-01-01

The regularities of anodic behaviour and electrochemical machining (ECM) of the samples of three materials with the following compositions: 25% of Cr/sub 3/C/sub 2/, 15% of Ni, 70% of TiC, 25% of Ni, 5% of Cr, 70% of TiC, 15% of Ni, 15% of Mo are investigated. It is shown that the electrochemical method is applicable to hard alloys machining on the base of chromium and titanium carbides, the machining of which mechanically meets serious difficulties. The alloys machining rate by a mobile cathode constitutes about 0.5 mm/min.

Trunk lean gait decreases multi-segmental coordination in the vertical direction.

Science.gov (United States)

Tokuda, Kazuki; Anan, Masaya; Sawada, Tomonori; Tanimoto, Kenji; Takeda, Takuya; Ogata, Yuta; Takahashi, Makoto; Kito, Nobuhiro; Shinkoda, Koichi

2017-11-01

[Purpose] The strategy of trunk lean gait to reduce external knee adduction moment (KAM) may affect multi-segmental synergy control of center of mass (COM) displacement. Uncontrolled manifold (UCM) analysis is an evaluation index to understand motor variability. The purpose of this study was to investigate how motor variability is affected by using UCM analysis on adjustment of the trunk lean angle. [Subjects and Methods] Fifteen healthy young adults walked at their preferred speed under two conditions: normal and trunk lean gait. UCM analysis was performed with respect to the COM displacement during the stance phase. The KAM data were analyzed at the points of the first KAM peak during the stance phase. [Results] The KAM during trunk lean gait was smaller than during normal gait. Despite a greater segmental configuration variance with respect to mediolateral COM displacement during trunk lean gait, the synergy index was not significantly different between the two conditions. The synergy index with respect to vertical COM displacement during trunk lean gait was smaller than that during normal gait. [Conclusion] These results suggest that trunk lean gait is effective in reducing KAM; however, it may decrease multi-segmental movement coordination of COM control in the vertical direction.

Efficient Project Delivery Using Lean Principles - An Indian Case Study

Science.gov (United States)

Kovvuri, P. Ramachandra Reddy; Sawhney, Anil; Ahuja, Ritu; Sreekumar, Aiswarya

2016-03-01

Construction industry in India is growing at a rapid pace. Along with this growth, the industry is facing numerous challenges that are making delivery of projects inefficient. Experts believe that capacity constraints in the industry need to be addressed immediately. Government has recommended `introduction of efficient technologies and modern management techniques' to increase the productivity of the industry. In this context, lean principles can act as a lever to make project delivery more efficient and provide the much needed impetus to the Indian construction sector. Around the globe lean principles are showing positive results on the projects. Project teams are reporting improvements in construction time, cost and quality along with softer benefits of enhanced collaboration, coordination and trust in project teams. Can adoption of lean principles provide similar benefits in the Indian construction sector? This research was conducted to answer this question. Using an action research approach a key lean construction tool called Last Planner System (LPS) was tested on a large Indian construction project. The work described in this work investigates the improvements achieved in project delivery by adopting LPS in Indian construction sector. Comparison in pre- and post-implementation data demonstrates increase in the certainty of work-flow and improves schedule compliance. This is measured through a simple LPS metric called percent plan complete. Explicit improvements in schedule performance are seen during 8 week LPS implementation along with implicit improvements in coordination, collaboration and trust in the project team. This work reports the findings of LPS implementation on the case study project outlining the barriers and drivers to adoption, strategies needed to ensure successful implementation and roadmap for implementation. Based on the findings the authors envision that lean construction can make project delivery more efficient in India.

Prediction of Machine Tool Condition Using Support Vector Machine

International Nuclear Information System (INIS)

Wang Peigong; Meng Qingfeng; Zhao Jian; Li Junjie; Wang Xiufeng

2011-01-01

Condition monitoring and predicting of CNC machine tools are investigated in this paper. Considering the CNC machine tools are often small numbers of samples, a condition predicting method for CNC machine tools based on support vector machines (SVMs) is proposed, then one-step and multi-step condition prediction models are constructed. The support vector machines prediction models are used to predict the trends of working condition of a certain type of CNC worm wheel and gear grinding machine by applying sequence data of vibration signal, which is collected during machine processing. And the relationship between different eigenvalue in CNC vibration signal and machining quality is discussed. The test result shows that the trend of vibration signal Peak-to-peak value in surface normal direction is most relevant to the trend of surface roughness value. In trends prediction of working condition, support vector machine has higher prediction accuracy both in the short term ('One-step') and long term (multi-step) prediction compared to autoregressive (AR) model and the RBF neural network. Experimental results show that it is feasible to apply support vector machine to CNC machine tool condition prediction.

INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

Directory of Open Access Journals (Sweden)

Berat Barıs BULDUM

2013-01-01

Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

Safety reloaded: lean operations and high involvement work practices for sustainable workplaces

OpenAIRE

Camuffo, Arnaldo; De Stefano, Federica; Paolino, Chiara

2017-01-01

Starting from the recent quest to investigate the human side of organizational sustainability, this study applies a variety of regression analyses to investigate the effects of Lean Operations, High Involvement Work Practices, and management behaviors on occupational safety. It tests and finds support for the hypotheses that Lean Production systems, High Involvement Work Practices, and two specific management behaviors—workers’ capability development (coaching and teaching of workers) and emp...

An accounting system to support process improvements: Transition to lean accounting

Directory of Open Access Journals (Sweden)

Patxi Ruiz de Arbulo-López

2010-12-01

Full Text Available From the last two decades of the 20th Century on, many companies have adopted production strategies that could be termed “lean manufacturing”. Lean team leaders state that traditional costing systems fail to properly assess their operational improvements and therefore ask for new cost accounting methods. The search for a new accounting paradigm has led to important applied research and several accounting methods.   In this paper we are going to show the state of the art in costing techniques used in companies that adopt lean manufacturing practices and we will be presenting an additional costing method, based on Activity-Based Costing, intended to cast light on the operational improvements achieved in companies that are just starting a maturity path towards lean manufacturing. This article examines how the approach is applied in the context of a manufacturing company.

Lean Production Applications in a Manufacturing Company

Directory of Open Access Journals (Sweden)

Ali Görener

2016-01-01

Full Text Available Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cycle times were determined, and Kaizen improvement methods and line balancing methods were applied according to the results. And the last section of study showed conclusion of lean implementation.

Learning Algorithm of Boltzmann Machine Based on Spatial Monte Carlo Integration Method

Directory of Open Access Journals (Sweden)

Muneki Yasuda

2018-04-01

Full Text Available The machine learning techniques for Markov random fields are fundamental in various fields involving pattern recognition, image processing, sparse modeling, and earth science, and a Boltzmann machine is one of the most important models in Markov random fields. However, the inference and learning problems in the Boltzmann machine are NP-hard. The investigation of an effective learning algorithm for the Boltzmann machine is one of the most important challenges in the field of statistical machine learning. In this paper, we study Boltzmann machine learning based on the (first-order spatial Monte Carlo integration method, referred to as the 1-SMCI learning method, which was proposed in the author’s previous paper. In the first part of this paper, we compare the method with the maximum pseudo-likelihood estimation (MPLE method using a theoretical and a numerical approaches, and show the 1-SMCI learning method is more effective than the MPLE. In the latter part, we compare the 1-SMCI learning method with other effective methods, ratio matching and minimum probability flow, using a numerical experiment, and show the 1-SMCI learning method outperforms them.

Designing machines for lattice physics and algorithm investigation

International Nuclear Information System (INIS)

Fischler, M.; Atac, R.; Cook, A.

1989-10-01

Special-purpose computers are appropriate tools for the study of lattice gauge theory. While these machines deliver considerable processing power, it is also important to be able to program complex physics ideas and investigate algorithms on them. We examine features that facilitate coding of physics problems, and flexibility in algorithms. Appropriate balances among power, memory, communications and I/O capabilities are presented. 10 refs

Instill Lean A3 Thinking into Healthcare IT Services

Directory of Open Access Journals (Sweden)

Jihong Zeng

2014-08-01

Full Text Available Healthcare information technology is a key enabler for care transformation to provide quality care at low cost and better population health.  Many healthcare organizations have established IT Program Management and adopted ITIL best practice to manage IT services. However, ITIL and traditional project management are heavily process oriented, and neither flexible nor effective enough for swift response to changing business demand. Lean methodologies are increasingly deployed by healthcare providers to improve workflow process management but only has limited use cases documented in healthcare IT service. This paper introduces the Lean A3 Thinking methodology and its value in identifying and eliminating wastes to provide agile and effective solutions in response to customer requests. We present a case study of applying Lean A3 Thinking to improve clinical informatics reporting service. The initial evaluation results are promising and indicate that both ITIL and Lean A3 Thinking focus on customer and service quality, complementing each other well. ITIL provides a framework for ITSM based on a set of best practice to manage IT services. Lean A3 Thinking specifies a set of framework and tools for improving quality of services and processes by eliminating wastes. Proper balance between Lean and ITIL principles for ITSM needs more research and further study.

Exploring the impact of Lean manufacturing on flexibility in SMEs

Energy Technology Data Exchange (ETDEWEB)

Lucherini, Franco; Rapaccini, Mario

2017-07-01

This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

Exploring the impact of Lean manufacturing on flexibility in SMEs

Directory of Open Access Journals (Sweden)

Franco Lucherini

2017-11-01

Full Text Available Purpose: This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

Exploring the impact of Lean manufacturing on flexibility in SMEs

International Nuclear Information System (INIS)

Lucherini, Franco; Rapaccini, Mario

2017-01-01

This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

Readiness factors for lean implementation in healthcare settings--a literature review.

Science.gov (United States)

Al-Balushi, S; Sohal, A S; Singh, P J; Al Hajri, A; Al Farsi, Y M; Al Abri, R

2014-01-01

The purpose of this paper is to determine the readiness factors that are critical to the application and success of lean operating principles in healthcare organizations through a review of relevant literature. A comprehensive review of literature focussing on lean and lean healthcare was conducted. Leadership, organizational culture, communication, training, measurement, and reward systems are all commonly attributed readiness factors throughout general change management and lean literature. However, directly related to the successful implementation of lean in healthcare is that a setting is able to authorize a decentralized management style and undertake an end-to-end process view. These can be particularly difficult initiatives for complex organizations such as healthcare settings. The readiness factors identified are based on a review of the published literature. The external validity of the findings could be enhanced if tested using an empirical study. The readiness factors identified will enable healthcare practitioners to be better prepared as they begin their lean journeys. Sustainability of the lean initiative will be at stake if these readiness factors are not addressed. To the best of the knowledge, this is the first paper that provides a consolidated list of key lean readiness factors that can guide practice, as well as future theory and empirical research.

Training for successful lean manufacturing implementation

OpenAIRE

Ichimura, Maki; Jahankhani, Hamid; Arunachalam, Subramaniam

2006-01-01

Implementing lean manufacturing is a complex and everlasting task. The workers involving in production processes are the pivot of the lean manufacturing implementation. Training is known as a vehicle to assist the implementation process. Despite awareness of the training importance, so far, a little is available to assist to organise an efficient training. This paper summarises the overview of lean manufacturing and discuss the importance of human resource within lean implementation process. ...

Lean Six Sigma in financial services

NARCIS (Netherlands)

de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

2008-01-01

Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant

Individualisation of Lean Concept in Companies Dealing with Mass Production

Science.gov (United States)

Bednár, Roman

2012-12-01

The methods of lean manufacturing primarily designed for businesses dealing with serial production, are also used in other types of production. However the concept of lean production was not designed for these types of businesses, they are utilized only partially. Paper focuses on applying methods of lean concept in companies which are dealing with mass production and their options of exchange for other methods in the event of disagreement. Basis of the article is a list of lean methods with its description and its utilization in practice. The questionnaire was utilized to identify information from the practice. Based on this survey were identified the critical methods that are no longer appropriate for companies dealing with mass production. However, there are alternative methods of describing the problem. It is possible to say that companies are trying to get closer to their goal by modification of the basic concepts. And the concept of Lean Enterprise serves as a standard.

Healthy Lean Through HRD

DEFF Research Database (Denmark)

Jørgensen, Frances

2008-01-01

The paper reports on findings from the initial, exploratory phase of a longitudinal research study aimed at developing a framework for implementing lean while ensuring employee well-being. Data from observations and in-depth dialogues with persons involved in lean implementation, along...

A Lean Six Sigma program in higher education

KAUST Repository

Svensson, Carsten

2015-01-01

Purpose The objective of this paper is to contribute to the body of Lean Six Sigma knowledge within the field of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges of applying the Lean Six Sigma method in a complex transactional environment. Design/methodology/approach The observations presented in this paper originate from rolling out a large Lean Six Sigma implementation at a recently established university. The paper is supported with secondary data from literature. Findings The implementation of Lean Six Sigma methodology at King Abdullah University of Science and Technology (KAUST) has resulted in improvements in business processes and efficiency. This has been achieved through project execution and training programs. Approximately 350 staff members have completed awareness training, 50 yellow belts and 150 green belts have been trained, and the first round of seven black belts have completed training of which two have completed certification. Research limitations/implications This paper is based on an empirical study of a single instance and the authors’ experiences as practitioners. Originality/value This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

Lean management - an effective way to arrange maintenance?; Lean Management - ein effektiver Weg zur Gestaltung der Instandhaltung?

Energy Technology Data Exchange (ETDEWEB)

Tschuschke, W. [Inst. fuer Instandhaltung gGmbH, Iserlohn (Germany)

1996-08-01

Lean management/lean production wishes to attain more through intelligent operation system/production at less expense (personnel, materials, energy, costs). The object is not harder but more intelligent and production work; we do not need to run faster but to find shorter routes. The idea of lean management`s effects and changes have consequences for the field of maintenance as an equivalent and legitimate business area which are discussed in this paper. (orig.) [Deutsch] Lean Management/Lean Production will durch ein intelligentes Arbeitssystem/Produzieren mit weniger Aufwand (Personal, Material, Energie, Kosten) mehr erreichen. Ziel ist nicht das haertere, sondern das intelligentere und produktivere Arbeiten; wir sollen nicht schneller laufen, sondern kuerzere Wege finden. Fuer den Bereich Instandhaltung als gleichwertiger und gleichberechtigter Unternehmensbereich haben die Gedanken des Lean Managements Auswirkungen und Veraenderungen zur Folge, die im Beitrag genannt werden. (orig.)

An Interactive Web-based Learning System for Assisting Machining Technology Education

Directory of Open Access Journals (Sweden)

Min Jou

2008-05-01

Full Text Available The key technique of manufacturing methods is machining. The degree of technique of machining directly affects the quality of the product. Therefore, the machining technique is of primary importance in promoting student practice ability during the training process. Currently, practical training is applied in shop floor to discipline student’s practice ability. Much time and cost are used to teach these techniques. Particularly, computerized machines are continuously increasing in use. The development of educating engineers on computerized machines becomes much more difficult than with traditional machines. This is because of the limitation of the extremely expensive cost of teaching. The quality and quantity of teaching cannot always be promoted in this respect. The traditional teaching methods can not respond well to the needs of the future. Therefore, this research aims to the following topics; (1.Propose the teaching strategies for the students to learning machining processing planning through web-based learning system. (2.Establish on-line teaching material for the computer-aided manufacturing courses including CNC coding method, CNC simulation. (3.Develop the virtual machining laboratory to bring the machining practical training to web-based learning system. (4.Integrate multi-media and virtual laboratory in the developed e-learning web-based system to enhance the effectiveness of machining education through web-based system.

Lean manufacturing in Indian context: A survey

Directory of Open Access Journals (Sweden)

Rakesh Kumar

2015-04-01

Full Text Available This paper is an attempt to examine the implementation of Lean Manufacturing system in the Indian industries. Predominant elements of Lean Manufacturing, benefits gained after its implementation and obstacles observed by Indian Industry have been recognized. The results of this survey support the opinion that Lean Manufacturing had potential to improve the organizational performance of Indian industries. Nevertheless, Indian industries are required to be passionate to transform their manufacturing by adopting Lean manufacturing to gain the full benefits. A large numbers of literature papers are available on the better side of Lean manufacturing approach and its benefits gained by manufacturing organizations after implementation. But the adverse impacts of Lean manufacturing are not discussed to a great extent. Some drawbacks of Lean manufacturing are also highlighted in this paper.

The Finnish healthcare services lean management.

Science.gov (United States)

Hihnala, Susanna; Kettunen, Lilja; Suhonen, Marjo; Tiirinki, Hanna

2018-02-05

Purpose The purpose of this paper is to discuss health services managers' experiences of management in a special health-care unit and development efforts from the point of view of the Lean method. Additionally, the aim is to deepen the knowledge of the managers' work and nature of the Lean method development processes in the workplace. The research focuses on those aspects and results of Lean method that are currently being used in health-care environments. Design/methodology/approach These data were collected through a number of thematic interviews. The participants were nurse managers ( n = 7) and medical managers ( n = 7) who applied Lean management in their work at the University Hospital in the Northern Ostrobothnia Health Care District. The data were analysed with a qualitative content analysis. Findings A common set of values in specialized health-care services, development of activities and challenges for management in the use of the Lean manager development model to improve personal management skills. Practical implications Managers in specialized health-care services can develop and systematically manage with the help of the Lean method. This emphasizes assumptions, from the point of view of management, about systems development when the organization uses the Lean method. The research outcomes originate from specialized health-care settings in Finland in which the Lean method and its associated management principles have been implemented and applied to the delivery of health care. Originality/value The study shows that the research results and in-depth knowledge on Lean method principles can be applied to health-care management and development processes. The research also describes health services managers' experiences of using the Lean method. In the future, these results can be used to improve Lean management skills, identify personal professional competencies and develop skills required in development processes. Also, the research findings can be used

Dictionary Based Machine Translation from Kannada to Telugu

Science.gov (United States)

Sindhu, D. V.; Sagar, B. M.

2017-08-01

Machine Translation is a task of translating from one language to another language. For the languages with less linguistic resources like Kannada and Telugu Dictionary based approach is the best approach. This paper mainly focuses on Dictionary based machine translation for Kannada to Telugu. The proposed methodology uses dictionary for translating word by word without much correlation of semantics between them. The dictionary based machine translation process has the following sub process: Morph analyzer, dictionary, transliteration, transfer grammar and the morph generator. As a part of this work bilingual dictionary with 8000 entries is developed and the suffix mapping table at the tag level is built. This system is tested for the children stories. In near future this system can be further improved by defining transfer grammar rules.

Skaber lean bedre arbejdsmiljø?

DEFF Research Database (Denmark)

Hansen, Nanette Juhler

2007-01-01

rationalization strategies, among others Lean, claim to improve working conditions. The aim of this thesis is to identify whether the application of Lean strategies leads to a reduction of the occupational health and safety problem repetitive work. Repetitive work is a problem created by the Taylorisation of work......, and therefore it is to be expected that a break with one or more of the Tayloristic principles can lead to a reduction of repetitive work. This thesis points out a number of areas within which Lean breaks with Tayloristic principles, whilst other principles are maintained. These breaks between Lean...... and Taylorism are also found in the study of the case company. By linking breaks with Taylorism with solutions for the reduction of repetitive work, I point out a number of openings in Lean that may lead to a reduction of repetitive work. By using the concept of openings I present the possibilities offered...

What Is Lean Management in Health Care? Development of an Operational Definition for a Cochrane Systematic Review.

Science.gov (United States)

Rotter, Thomas; Plishka, Christopher; Lawal, Adegboyega; Harrison, Liz; Sari, Nazmi; Goodridge, Donna; Flynn, Rachel; Chan, James; Fiander, Michelle; Poksinska, Bonnie; Willoughby, Keith; Kinsman, Leigh

2018-01-01

Industrial improvement approaches such as Lean management are increasingly being adopted in health care. Synthesis is necessary to ensure these approaches are evidence based and requires operationalization of concepts to ensure all relevant studies are included. This article outlines the process utilized to develop an operational definition of Lean in health care. The literature search, screening, data extraction, and data synthesis processes followed the recommendations outlined by the Cochrane Collaboration. Development of the operational definition utilized the methods prescribed by Kinsman et al. and Wieland et al. This involved extracting characteristics of Lean, synthesizing similar components to establish an operational definition, applying this definition, and updating the definition to address shortcomings. We identified two defining characteristics of Lean health-care management: (1) Lean philosophy, consisting of Lean principles and continuous improvement, and (2) Lean activities, which include Lean assessment activities and Lean improvement activities. The resulting operational definition requires that an organization or subunit of an organization had integrated Lean philosophy into the organization's mandate, guidelines, or policies and utilized at least one Lean assessment activity or Lean improvement activity. This operational definition of Lean management in health care will act as an objective screening criterion for our systematic review. To our knowledge, this is the first evidence-based operational definition of Lean management in health care.

Aplikace lean managementu ve vybrané firmě

OpenAIRE

Zeman, Tomáš

2014-01-01

Abstract: The bachelor thesis is about approaches of lean management in operational ma-nagement. This way of thinking is based on Japanese methods of lean management and continuous improvement kaizen. These methods aim to eliminate all types of wasteing, shorten lead time and increase quality of output. The bachelor thesis is divided into two parts. In the theoretical part will be described theoretical knowledge and practical part, which will include direct practical solutions to problems in ...

Improvement of laboratory turnaround time using lean methodology.

Science.gov (United States)

Gupta, Shradha; Kapil, Sahil; Sharma, Monica

2018-05-14

Purpose The purpose of this paper is to discuss the implementation of lean methodology to reduce the turnaround time (TAT) of a clinical laboratory in a super speciality hospital. Delays in report delivery lead to delayed diagnosis increased waiting time and decreased customer satisfaction. The reduction in TAT will lead to increased patient satisfaction, quality of care, employee satisfaction and ultimately the hospital's revenue. Design/methodology/approach The generic causes resulting in increasing TAT of clinical laboratories were identified using lean tools and techniques such as value stream mapping (VSM), Gemba, Pareto Analysis and Root Cause Analysis. VSM was used as a tool to analyze the current state of the process and further VSM was used to design the future state with suggestions for process improvements. Findings This study identified 12 major non-value added factors for the hematology laboratory and 5 major non-value added factors for the biochemistry lab which were acting as bottlenecks resulting in limiting throughput. A four-month research study by the authors together with hospital quality department and laboratory staff members led to reduction of the average TAT from 180 to 95minutes in the hematology lab and from 268 to 208 minutes in the biochemistry lab. Practical implications Very few improvement initiatives in Indian healthcare are based on industrial engineering tools and techniques, which might be due to a lack of interaction between healthcare and engineering. The study provides a positive outcome in terms of improving the efficiency of services in hospitals and identifies a scope for lean in the Indian healthcare sector. Social implications Applying lean in the Indian healthcare sector gives its own potential solution to the problem caused, due to a wide gap between lean accessibility and lean implementation. Lean helped in changing the mindset of an organization toward providing the highest quality of services with faster delivery at

The research on construction and application of machining process knowledge base

Science.gov (United States)

Zhao, Tan; Qiao, Lihong; Qie, Yifan; Guo, Kai

2018-03-01

In order to realize the application of knowledge in machining process design, from the perspective of knowledge in the application of computer aided process planning(CAPP), a hierarchical structure of knowledge classification is established according to the characteristics of mechanical engineering field. The expression of machining process knowledge is structured by means of production rules and the object-oriented methods. Three kinds of knowledge base models are constructed according to the representation of machining process knowledge. In this paper, the definition and classification of machining process knowledge, knowledge model, and the application flow of the process design based on the knowledge base are given, and the main steps of the design decision of the machine tool are carried out as an application by using the knowledge base.

A survey of machine readable data bases

Science.gov (United States)

Matlock, P.

1981-01-01

Forty-two of the machine readable data bases available to the technologist and researcher in the natural sciences and engineering are described and compared with the data bases and date base services offered by NASA.

Effective management of patients with acute ischemic stroke based on lean production on thrombolytic flow optimization.

Science.gov (United States)

Liang, Zhuoyuan; Ren, Lijie; Wang, Ting; Hu, Huoyou; Li, Weiping; Wang, Yaping; Liu, Dehong; Lie, Yi

2016-12-01

The efficacy of thrombolytic therapy for acute ischemic stroke (AIS) decreases when the administration of tissue plasminogen activator (tPA) is delayed. Derived from Toyota Production System, lean production aims to create top-quality products with high-efficiency procedures, a concept that easily applies to emergency medicine. In this study, we aimed to determine whether applying lean principles to flow optimization could hasten the initiation of thrombolysis. A multidisciplinary team (Stroke Team) was organized to implement an ongoing, continuous loop of lean production that contained the following steps: decomposition, recognition, intervention, reengineering and assessment. The door-to-needle time (DNT) and the percentage of patients with DNT ≤ 60 min before and after the adoption of lean principles were used to evaluate the efficiency of our flow optimization. Thirteen patients with AIS in the pre-lean period and 43 patients with AIS in the lean period (23 in lean period I and 20 patients in lean period II) were consecutively enrolled in our study. After flow optimization, we reduced DNT from 90 to 47 min (p < 0.001 ¤ ). In addition, the percentage of patients treated ≤60 min after hospital arrival increased from 38.46 to 75.0 % (p = 0.015 ¤ ). Adjusted analysis of covariance confirmed a significant influence of optimization on delay of tPA administration (p < 0.001). The patients were more likely to have a good prognosis (mRS ≤ 2 at 90 days) after the flow optimization (30.77-75.00 %, p = 0.012 ¤ ). Our study may offer an effective approach for optimizing the thrombolytic flow in the management of AIS.

Lean Transformation Guidance: Why Organizations Fail To Achieve and Sustain Excellence Through Lean Improvement

OpenAIRE

Mohammed Hamed Ahmed

2013-01-01

Many companies are complaining that lean didn’t achieve their long-term goals, and the improvement impact was very short-lived. 7 out of each 10 lean projects fail as companies try to use lean like a toolkit, copying and pasting the techniques without trying to adapt the employee’s culture, manage the improvement process, sustain the results, and develop their leaders. When the Toyota production system was created, the main goal was to remove wastes from the shop floor us...

An empirical review of lean manufacturing and their strategies

Directory of Open Access Journals (Sweden)

Virender Chahal

2017-07-01

Full Text Available The theory of lean manufacturing provides the quality of the products in minimum cost and pro-vides customer satisfaction. Today, the competition level is very high and every industry tries to supply high quality products in nominal cost, so lean is the latest tool to achieve. The objective of this paper is to study different lean concepts under various lean strategies. This study helps to find out the status of lean manufacturing and its ways of implementation. Also in this paper, there is a discussion about lean manufacturing concept, lean waste, lean strategies, lean barriers and cycle of lean implementation. This paper presents a literature review to clear the status of lean manufacturing and their strategies with help of collection of relevant papers.

[Physical exercise is a help for lean women with polycystic ovary syndrome].

Science.gov (United States)

Bisgaard, Helene; Dela, Flemming

2017-06-05

Polycystic ovary syndrome (PCOS) affects 12-21% of women in the childbearing age and is the most common cause of hyperandrogenaemia and anovulatory infertility. There is an increase in insulin resistance in both overweight and lean women with PCOS. Exercise treatment is mandatory among the overweight women due to sufficient evidence that it can improve the signs and symptoms of PCOS. This has not been fully investigated among the lean. However, new randomized controlled trials show that structured physical exercise can also improve insulin sensitivity, hyperandrogenaemia and menstrual frequency in lean women with PCOS.

Implementing Lean Health Reforms in Saskatchewan

Directory of Open Access Journals (Sweden)

Greg Marchildon

2013-07-01

Full Text Available Saskatchewan has gone further than any other Canadian province in implementing health system process improvements using Lean, a production line discipline that originated with the automobile industry. The goal of the Lean reform is to reduce waste and improve quality and overall health system performance by long-term changes in behaviour. Lean enjoys a privileged position on the provincial government’s agenda because of the policy’s championing by the Deputy Minister of Health and the policy’s fit with the government’s patient-centred care agenda. The implementation of reform depends on a major investment of time in the training and Lean-certification of key leaders and managers in the provincial health system. The Saskatchewan Union of Nurses, the union representing the single largest group of health workers in the province, has agreed to co-operate with the provincial government in implementing Lean-type reforms. Thus far, the government has had limited independent evaluation of Lean while internal evaluations claim some successes.

The role of culture and leadership in lean transformation: a review and assessment model

OpenAIRE

Al-Najem, Mohamad; Dhakal, Hom; Bennett, Nick

2012-01-01

This study investigates how the organisational culture and leadership influence the implementation of lean system in organisations. In doing so, organisational culture, leadership and internal issues concerning human resources are incorporated and discussed. The study further explains how an organisation can benefit from assessment of their culture by adopting Lean Culture Assessment Model (LCAM). The Critical Success Factors (CSFs) for lean system and internal as well as external organisatio...

Employee perspective on lean implementation - a qualitative study in a Finnish pension insurance company

OpenAIRE

Mohamed, Amina

2016-01-01

The principles of Lean management and Lean implementation is being increasingly applied to various different organizations, due to the benefits of enhancing productivity, the avoidance of excess waste whilst still creating value for customers as well as for the employees. The core of Lean philosophy is based on the understanding of people, their motivations and aspirations. It was established that the most important factor in the success of Lean implementation is employee participation and em...

Optimization of machining parameters of turning operations based on multi performance criteria

Directory of Open Access Journals (Sweden)

N.K.Mandal

2013-01-01

Full Text Available The selection of optimum machining parameters plays a significant role to ensure quality of product, to reduce the manufacturing cost and to increase productivity in computer controlled manufacturing process. For many years, multi-objective optimization of turning based on inherent complexity of process is a competitive engineering issue. This study investigates multi-response optimization of turning process for an optimal parametric combination to yield the minimum power consumption, surface roughness and frequency of tool vibration using a combination of a Grey relational analysis (GRA. Confirmation test is conducted for the optimal machining parameters to validate the test result. Various turning parameters, such as spindle speed, feed and depth of cut are considered. Experiments are designed and conducted based on full factorial design of experiment.

An Investigation of Data Privacy and Utility Using Machine Learning as a Gauge

Science.gov (United States)

Mivule, Kato

2014-01-01

The purpose of this investigation is to study and pursue a user-defined approach in preserving data privacy while maintaining an acceptable level of data utility using machine learning classification techniques as a gauge in the generation of synthetic data sets. This dissertation will deal with data privacy, data utility, machine learning…

Prediction Model of Machining Failure Trend Based on Large Data Analysis

Science.gov (United States)

Li, Jirong

2017-12-01

The mechanical processing has high complexity, strong coupling, a lot of control factors in the machining process, it is prone to failure, in order to improve the accuracy of fault detection of large mechanical equipment, research on fault trend prediction requires machining, machining fault trend prediction model based on fault data. The characteristics of data processing using genetic algorithm K mean clustering for machining, machining feature extraction which reflects the correlation dimension of fault, spectrum characteristics analysis of abnormal vibration of complex mechanical parts processing process, the extraction method of the abnormal vibration of complex mechanical parts processing process of multi-component spectral decomposition and empirical mode decomposition Hilbert based on feature extraction and the decomposition results, in order to establish the intelligent expert system for the data base, combined with large data analysis method to realize the machining of the Fault trend prediction. The simulation results show that this method of fault trend prediction of mechanical machining accuracy is better, the fault in the mechanical process accurate judgment ability, it has good application value analysis and fault diagnosis in the machining process.

Investigating Mesoscale Convective Systems and their Predictability Using Machine Learning

Science.gov (United States)

Daher, H.; Duffy, D.; Bowen, M. K.

2016-12-01

A mesoscale convective system (MCS) is a thunderstorm region that lasts several hours long and forms near weather fronts and can often develop into tornadoes. Here we seek to answer the question of whether these tornadoes are "predictable" by looking for a defining characteristic(s) separating MCSs that evolve into tornadoes versus those that do not. Using NASA's Modern Era Retrospective-analysis for Research and Applications 2 reanalysis data (M2R12K), we apply several state of the art machine learning techniques to investigate this question. The spatial region examined in this experiment is Tornado Alley in the United States over the peak tornado months. A database containing select variables from M2R12K is created using PostgreSQL. This database is then analyzed using machine learning methods such as Symbolic Aggregate approXimation (SAX) and DBSCAN (an unsupervised density-based data clustering algorithm). The incentive behind using these methods is to mathematically define a MCS so that association rule mining techniques can be used to uncover some sort of signal or teleconnection that will help us forecast which MCSs will result in tornadoes and therefore give society more time to prepare and in turn reduce casualties and destruction.

Dynamic Behavior of Reverse Flow Reactor for Lean Methane Combustion

OpenAIRE

Yogi W. Budhi; M. Effendy; Yazid Bindar; Subagjo

2014-01-01

The stability of reactor operation for catalytic oxidation of lean CH4 has been investigated through modeling and simulation, particularly the influence of switching time and heat extraction on reverse flow reactor (RFR) performance. A mathematical model of the RFR was developed, based on one-dimensional pseudo-homogeneous model for mass and heat balances, incorporating heat loss through the reactor wall. The configuration of the RFR consisted of inert-catalyst-inert, with or without heat ext...

Assessment of insulin resistance and impaired glucose tolerance in lean women with polycystic ovary syndrome.

Science.gov (United States)

Stovall, Dale William; Bailey, Amelia Purser; Pastore, Lisa M

2011-01-01

To analyze insulin resistance (IR) and determine the need for a 2-hour oral glucose tolerance test (OGTT) for the identification of IR and impaired glucose tolerance (IGT) in lean nondiabetic women with polycystic ovary syndrome (PCOS). This was a cross-sectional analysis of treatment-naive women with PCOS who enrolled in a university-based clinical trial. Nondiabetic women with PCOS based on the Eunice Kennedy Shriven National Institute of Child Health and Human Development (NICHD) definition, aged 18-43 years and weighing ≤113 kg, were evaluated. Glucose and insulin levels were assessed at times 0, 30, 60, 90, and 120 minutes after a 75-g glucose load. Lean was defined as body mass index (BMI) women was studied. The prevalence of IR was 0% among lean women vs. 21% among nonlean subjects based on fasting insulin I(0) and 40%-68% based on two different homeostatic model assessment (HOMA) cutoff points (p women with IR had a BMI ≥ 28. Controlling for age and race, BMI explained over 57% of the variation in insulin fasting (I(o)), glucose fasting/Io (G(o)/I(o)), the qualitative insulin sensitivity check index (QUICKI), and HOMA and was a highly significant predictor of these outcomes (p lean PCOS women had IGT based on a 2-hour OGTT, and no lean subjects had IGT based on their fasting blood glucose. Diabetes mellitus, IGT, and IR are far less common in young lean women with PCOS compared with obese women with PCOS. These data imply that it is unnecessary to routinely perform either IR testing or 2-hour OGTT in lean women with PCOS; however, greater subject accumulation is needed to determine if OGTT is necessary in lean women with PCOS. BMI is highly predictive of both insulin and glucose levels in women with PCOS.

Lean and the quality of work

DEFF Research Database (Denmark)

Jensen, Per Langaa

2008-01-01

Lean has for the last decade developed as the dominating model for developing productions processes not only within industry but also in health care, administration and service industries in general. With this development a discussion on human factors aspects of lean has developed internationally....... Literature studies documents that it is not possible to establish a clear relation between lean and the psychosocial aspects of work. The studies also indicate that the context and the implementations process play a dominating role in how lean is experienced. This has been the basis for establishing...

Organizational change through Lean Thinking.

Science.gov (United States)

Tsasis, Peter; Bruce-Barrett, Cindy

2008-08-01

In production and manufacturing plants, Lean Thinking has been used to improve processes by eliminating waste and thus enhancing efficiency. In health care, Lean Thinking has emerged as a comprehensive approach towards improving processes embedded in the diagnostic, treatment and care activities of health-care organizations with cost containment results. This paper provides a case study example where Lean Thinking is not only used to improve efficiency and cost containment, but also as an approach to effective organizational change.

Investigations of Effect of Rotary EDM Electrode on Machining Performance of Al6061 Alloy

Science.gov (United States)

Robinson Smart, D. S.; Jenish Smart, Joses; Periasamy, C.; Ratna Kumar, P. S. Samuel

2018-04-01

Electric Discharge Machining is an essential process which is being used for machining desired shape using electrical discharges which creates sparks. There will be electrodes subjected to electric voltage and which are separated by a dielectric liquid. Removing of material will be due to the continuous and rapid current discharges between two electrodes.. The spark is very carefully controlled and localized so that it only affects the surface of the material. Usually in order to prevent the defects which are arising due to the conventional machining, the Electric Discharge Machining (EDM) machining is preferred. Also intricate and complicated shapes can be machined effectively by use of Electric Discharge Machining (EDM). The EDM process usually does not affect the heat treat below the surface. This research work focus on the design and fabrication of rotary EDM tool for machining Al6061alloy and investigation of effect of rotary tool on surface finish, material removal rate and tool wear rate. Also the effect of machining parameters of EDM such as pulse on & off time, current on material Removal Rate (MRR), Surface Roughness (SR) and Electrode wear rate (EWR) have studied. Al6061 alloy can be used for marine and offshore applications by reinforcing some other elements. The investigations have revealed that MRR (material removal rate), surface roughness (Ra) have been improved with the reduction in the tool wear rate (TWR) when the tool is rotating instead of stationary. It was clear that as rotary speed of the tool is increasing the material removal rate is increasing with the reduction of surface finish and tool wear rate.

Interactions between lean management and the psychosocial work environment in a hospital setting - a multi-method study.

Science.gov (United States)

Ulhassan, Waqar; von Thiele Schwarz, Ulrica; Thor, Johan; Westerlund, Hugo

2014-10-22

As health care struggles to meet increasing demands with limited resources, Lean has become a popular management approach. It has mainly been studied in relation to health care performance. The empirical evidence as to how Lean affects the psychosocial work environment has been contradictory. This study aims to study the interaction between Lean and the psychosocial work environment using a comprehensive model that takes Lean implementation information, as well as Lean theory and the particular context into consideration. The psychosocial work environment was measured twice with the Copenhagen Psychosocial Questionnaire (COPSOQ) employee survey during Lean implementations on May-June 2010 (T1) (n = 129) and November-December 2011 (T2) (n = 131) at three units (an Emergency Department (ED), Ward-I and Ward-II). Information based on qualitative data analysis of the Lean implementations and context from a previous paper was used to predict expected change patterns in the psychosocial work environment from T1 to T2 and subsequently compared with COPSOQ-data through linear regression analysis. Between T1 and T2, qualitative information showed a well-organized and steady Lean implementation on Ward-I with active employee participation, a partial Lean implementation on Ward-II with employees not seeing a clear need for such an intervention, and deterioration in already implemented Lean activities at ED, due to the declining interest of top management. Quantitative data analysis showed a significant relation between the expected and actual results regarding changes in the psychosocial work environment. Ward-I showed major improvements especially related to job control and social support, ED showed a major decline with some exceptions while Ward-II also showed improvements similar to Ward-I. The results suggest that Lean may have a positive impact on the psychosocial work environment given that it is properly implemented. Also, the psychosocial work environment may even

Systematic model for lean product development implementation in an automotive related company

Directory of Open Access Journals (Sweden)

Daniel Osezua Aikhuele

2017-07-01

Full Text Available Lean product development is a major innovative business strategy that employs sets of practices to achieve an efficient, innovative and a sustainable product development. Despite the many benefits and high hopes in the lean strategy, many companies are still struggling, and unable to either achieve or sustain substantial positive results with their lean implementation efforts. However, as the first step towards addressing this issue, this paper seeks to propose a systematic model that considers the administrative and implementation limitations of lean thinking practices in the product development process. The model which is based on the integration of fuzzy Shannon’s entropy and Modified Technique for Order Preference by Similarity to the Ideal Solution (M-TOPSIS model for the lean product development practices implementation with respective to different criteria including management and leadership, financial capabilities, skills and expertise and organization culture, provides a guide or roadmap for product development managers on the lean implementation route.

Lean - set i et historisk perspektiv

DEFF Research Database (Denmark)

Michelsen, Aage U

2006-01-01

I kapitlet redegøres for, hvordan begrebet Lean opstod som en karakteristik af Toyota Production System (TPS), der igen har sin rod i scientific management. Gennem eksempler illustreres det, at centrale Lean-principper således har været anvendt i årtier. Der argumenteres for, at Lean i mange...

The Lean and Environment Toolkit

Science.gov (United States)

This Lean and Environment Toolkit assembles practical experience collected by the U.S. Environmental Protection Agency (EPA) and partner companies and organizations that have experience with coordinating Lean implementation and environmental management.

Lean og professionel autonomi på hospitaler

DEFF Research Database (Denmark)

Hasle, Peter

2014-01-01

Hospitaler står overfor store udfordringer fra voksende krav fra både patienter og samfund samtidig med begrænsede budgetter og stadig flere medicinske muligheder. Hospitalsledelserne anvender lean som en af de væsentligste metoder til at løse disse udfordringer. Lean stammer imidlertid fra...... industrien, og det er spørgsmålet, hvordan lean bliver tilpasset i til en hospitalssammenhæng, og hvilke konsekvenser lean får for medarbejderne. Dette spørgsmål er undersøgt i forbindelse med introduktion af lean i en kræftafdeling på et universitetshospital. Det viste sig vanskeligere end forventet...... at implementere lean, og konsekvenserne for henholdsvis laboranter og sygeplejersker viste sig at være meget forskelligartede. Laboranterne oplevede et forbedret arbejdsmiljø, mens det modsatte var tilfældet for sygeplejerskerne. En mulig forklaring er, at lean øgede kontrollen over eget arbejde for laboranterne...

Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness

Science.gov (United States)

Tumac, Deniz

2014-03-01

Shore hardness has been used to estimate several physical and mechanical properties of rocks over the last few decades. However, the number of researches correlating Shore hardness with rock cutting performance is quite limited. Also, rather limited researches have been carried out on predicting the performance of chain saw machines. This study differs from the previous investigations in the way that Shore hardness values (SH1, SH2, and deformation coefficient) are used to determine the field performance of chain saw machines. The measured Shore hardness values are correlated with the physical and mechanical properties of natural stone samples, cutting parameters (normal force, cutting force, and specific energy) obtained from linear cutting tests in unrelieved cutting mode, and areal net cutting rate of chain saw machines. Two empirical models developed previously are improved for the prediction of the areal net cutting rate of chain saw machines. The first model is based on a revised chain saw penetration index, which uses SH1, machine weight, and useful arm cutting depth as predictors. The second model is based on the power consumed for only cutting the stone, arm thickness, and specific energy as a function of the deformation coefficient. While cutting force has a strong relationship with Shore hardness values, the normal force has a weak or moderate correlation. Uniaxial compressive strength, Cerchar abrasivity index, and density can also be predicted by Shore hardness values.

The machinability of nickel-based alloys in high-pressure jet assisted (HPJA turning

Directory of Open Access Journals (Sweden)

D. Kramar

2013-10-01

Full Text Available Due to their mechanical, thermal and chemical properties, nickel-based alloys are generally included among materials that are hard to machine. An experimental study has been performed to investigate the capabilities of conventional and high-pressure jet assisted (HPJA turning of hard-to-machine materials, namely Inconel 718. The capabilities of different hard turning procedures are compared by means of chip breakability. The obtained results show that HPJA method offers a significant increase in chip breakability, under the same cutting conditions (cutting speed, feed rate, depth of cut.

Machine Translation Effect on Communication

DEFF Research Database (Denmark)

Jensen, Mika Yasuoka; Bjørn, Pernille

2011-01-01

Intercultural collaboration facilitated by machine translation has gradually spread in various settings. Still, little is known as for the practice of machine-translation mediated communication. This paper investigates how machine translation affects intercultural communication in practice. Based...... on communication in which multilingual communication system is applied, we identify four communication types and its’ influences on stakeholders’ communication process, especially focusing on establishment and maintenance of common ground. Different from our expectation that quality of machine translation results...

PENERAPAN LEAN MANUFACTURING UNTUK MEREDUKSI WASTE DI INDUSTRI SKALA UKM

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-08-01

Full Text Available Lean Manufacturing merupakan konsep manufaktur untuk menghasilkan produk yang efisien dengan mengurangi biaya produksi melalui efisiensi. Dalam konsep Lean, dikenal 7 macam pemborosan yang meliputi produksi berlebih, transportasi material yang berlebihan, menunggu, proses yang tidak perlu, persediaan, pergerakan dan cacat produk. Penelitian ini menggunakan value stream mapping dalam mengidentifikasi pemborosan dan menelusuri potensi terjadinya pemborosan. Potensi pemborosan yang terjadi akan direduksi dengan menggunakan instrumen yang sesuai berdasarkan indikator terpilih. Penelitian diharapkan dapat menghasilkan proses produksi yang lebih efisiensi sehingga mampu mereduksi biaya produksi. Pada akhirnya akan menghasilkan profit yang lebih besar. Kata kunci : lean manufacturing, value stream mapping, waste   Lean Manufacturing is a manufacturing concepts to produce products that are efficient by reducing production costs through efficiencies. In the Lean concept, known seven kinds of waste, including overproduction, excessive material transportation, waiting, unnecessary processes, inventory, motion and product defects. This study uses value stream mapping to identify waste and exploring the potential for waste. Potential waste that occurs will be reduced by using appropriate instruments based on selected indicators. The study is expected to produce a more efficient production processes so as to reduce production costs.Will ultimately result in greater profits. Keywords: lean manufacturing, value stream mapping, waste

Value Stream Mapping to Improve Workplace to support Lean Environment

Directory of Open Access Journals (Sweden)

Ahmad Ahmad Nur Aizat

2017-01-01

Full Text Available In recent years, lean manufacturing is being followed by various sectors in order to keep their competitiveness in the global markets. Lean manufacturing plays a vital role in improving the efficiency of operation by eliminating or reducing wastes. Nonetheless, most of small and medium enterprises (SMEs lack sufficient knowledge or information on the benefits of implementing lean manufacturing. The main objective of this study is to apply value stream mapping, one of lean manufacturing tools, for improving the productivity in a SME by eliminating non-value added activities. In this study, lean manufacturing was adopted at a SME, particularly a food industry. Value stream mapping was served as main tool to identify the wastes and improvement opportunities in production line. Subsequently, different lean manufacturing tools such as Kaizen Burst, one piece flow, and 5S were applied to eliminate or reduce identified wastes. Based on the future state value stream mapping, final results showed that the total operation time and non-added value activities time were successfully decreased from 1993 seconds to 1719 seconds, and 234 seconds to 104 seconds, respectively. The findings of this study indicate that value stream mapping is an effective approach to eliminate the wastes and improve the productivity.

Incorporating Lean Construction agent into the Building Standards Act: the Spanish case study

Directory of Open Access Journals (Sweden)

Brioso Xavier

2016-12-01

Full Text Available There is a demand for lean construction in Europe; even though lean construction is still an emerging field and there is growing interest, there are no regulations on this topic. The main objective of this research is to regulate this role when in a project and to define and develop a building agent structure, according to the Building Standards Act (LOE by its acronym in Spanish, to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain, there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, who are defined in the courts as “constructive managers” or similar. For this reason, courts could establish in the future several liabilities for the lean construction specialist and other agents of the project, depending on their actions and based on the implementation of the lean project delivery system, the target value design and the integrated project delivery. Conversely, it is possible that the level of action of the lean construction specialist may comprise design management, construction management and contract management. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the lean construction specialist. The creation of the following agents is proposed: design manager, construction manager and contract manager, definitions that are developed in this study. These agents are loosely defined, because any project manager, building information modeling manager or similar may act as one or as more-than-one of them. Finally, the creation of the lean construction manager is also proposed, as the agent who takes on the role of the design manager, construction manager and contract manager, but focused on the lean production principles.

Lean automation development : applying lean principles to the automation development process

OpenAIRE

Granlund, Anna; Wiktorsson, Magnus; Grahn, Sten; Friedler, Niklas

2014-01-01

By a broad empirical study it is indicated that automation development show potential of improvement. In the paper, 13 lean product development principles are contrasted to the automation development process and it is suggested why and how these principles can facilitate, support and improve the automation development process. The paper summarises a description of what characterises a lean automation development process and what consequences it entails. Main differences compared to current pr...

Fundamental investigation on influence of external heat on chip formation during thermal assisted machining

Science.gov (United States)

Alkali, A. U.; Ginta, T. L.; Abdulrani, A. M.; Elsiti, N. M.

2018-04-01

Various heat sources have been investigated by numerous researchers to reveal machinability benefits of thermally assisted machining (TAM) process. Fewer engineering materials have been tested. In the same vein, those researches continue to demonstrate effective performance of TAM in terms of bulk material removal rate, improved surface finish, prolong tool life and reduction of cutting forces among others. Experimental investigation on the strain-hardenability and flow stress of material removed with respect to increase in temperature in TAM has not been given attention in previous studies. This study investigated the pattern of chip morphology and segmentation giving close attention to influence of external heat source responsible for strain – hardenability of the material removed during TAM and dry machining at room temperature. Full immersion down cut milling was used throughout the machining conditions. Machining was conducted on AISI 316L using uncoated tungsten carbide end mill insert at varying cutting speeds (V) of 50, 79, and 100 m/min, and feed rates (f) of 0.15, 0.25, and 0.4 mm/tooth while the depth of cut was maintained at 0.2mm throughout the machining trials. The analyses of chip formation, segmentations and stain hardenability were carried out by using LMU light microscope, field emission microscopy and micro indentation. The study observed that build up edge is formed when a stagnation zone develops in front of tool tip which give rise to poor thermal gradient for conduction heat to be transferred within the bulk material during dry machining. This promotes varying strain – hardening of the material removed with evident high chips hardness and thickness, whereas TAM circumvents such impairment by softening the shear zone through local preheat.

The Development Of A Theoretical Lean Culture Causal Framework To Support The Effective Implementation Of Lean In Automotive Component Manufacturers

Directory of Open Access Journals (Sweden)

Van der Merwe, Karl Robert

2014-05-01

Full Text Available Although it is generally accepted that lean manufacturing improves operational performance, many organisations are struggling to adapt to the lean philosophy. The purpose of this study is to contribute to a more effective strategy for implementing the lean manufacturing improvement philosophy. The study sets out both to integrate well-researched findings and theories related to generic organisational culture with more recent research and experience related to lean culture, and to examine the role that culture plays in the effective implementation of lean manufacturing principles and techniques. The ultimate aim of this exercise is to develop a theoretical lean culture causal framework.

Clinical and Metabolic Characterization of Lean Caucasian Subjects With Non-alcoholic Fatty Liver.

Science.gov (United States)

Feldman, Alexandra; Eder, Sebastian K; Felder, Thomas K; Kedenko, Lyudmyla; Paulweber, Bernhard; Stadlmayr, Andreas; Huber-Schönauer, Ursula; Niederseer, David; Stickel, Felix; Auer, Simon; Haschke-Becher, Elisabeth; Patsch, Wolfgang; Datz, Christian; Aigner, Elmar

2017-01-01

Non-alcoholic fatty liver disease (NAFLD) is closely linked to obesity; however, 5-8% of lean subjects also have evidence of NAFLD. We aimed to investigate clinical, genetic, metabolic and lifestyle characteristics in lean Caucasian subjects with NAFLD. Data from 187 subjects allocated to one of the three groups according to body mass index (BMI) and hepatic steatosis on ultrasound were obtained: lean healthy (BMI≤25 kg/m 2 , no steatosis, N=71), lean NAFLD (BMI≤25 kg/m 2 , steatosis, N=55), obese NAFLD (BMI≥30 kg/m 2 , steatosis; N=61). All subjects received a detailed clinical and laboratory examination including oral glucose tolerance test. The serum metabolome was assessed using the Metabolomics AbsoluteIDQ p180 kit (BIOCRATES Life Sciences). Genotyping for single-nucleotide polymorphisms (SNPs) associated with NAFLD was performed. Lean NAFLD subjects had fasting insulin concentrations similar to lean healthy subjects but had markedly impaired glucose tolerance. Lean NAFLD subjects had a higher rate of the mutant PNPLA3 CG/GG variant compared to lean controls (P=0.007). Serum adiponectin concentrations were decreased in both NAFLD groups compared to controls (Pphosphatidylcholines (PCaa C36:3; false discovery rate (FDR)-corrected P-value<0.001) as well as lysine, tyrosine, and valine (FDR<0.001). Lean subjects with evidence of NAFLD have clinically relevant impaired glucose tolerance, low adiponectin concentrations and a distinct metabolite profile with an increased rate of PNPLA3 risk allele carriage.

Empirical Studies On Machine Learning Based Text Classification Algorithms

OpenAIRE

Shweta C. Dharmadhikari; Maya Ingle; Parag Kulkarni

2011-01-01

Automatic classification of text documents has become an important research issue now days. Properclassification of text documents requires information retrieval, machine learning and Natural languageprocessing (NLP) techniques. Our aim is to focus on important approaches to automatic textclassification based on machine learning techniques viz. supervised, unsupervised and semi supervised.In this paper we present a review of various text classification approaches under machine learningparadig...

Prevalence and hemodynamic effects of leaning during CPR

Science.gov (United States)

Niles, Dana E.; Sutton, Robert M.; Nadkarni, Vinay M.; Glatz, Andrew; Zuercher, Mathias; Maltese, Matthew R.; Eilevstjønn, Joar; Abella, Benjamin S.; Becker, Lance B.; Berg, Robert A.

2013-01-01

Background Cardiopulmonary resuscitation (CPR) guidelines recommend complete release between chest compressions (CC). Objective Evaluate the hemodynamic effects of leaning (incomplete chest wall release) during CPR and the prevalence of leaning during CPR. Results In piglet ventricular fibrillation cardiac arrests, 10% and 20% (1.8 kg and 3.6 kg, respectively), leaning during CPR increased right atrial pressures, decreased coronary perfusion pressures, and decreased cardiac index and left ventricular myocardial blood flow by nearly 50%. In contrast, residual leaning of a 260 g accelerometer/ force feedback device did not adversely affect cardiac index or myocardial blood flow. Among 108 adult in-hospital CPR events, leaning ≥2.5 kg was demonstrable in 91% of the events and 12% of the evaluated CC. For 12 children with in-hospital CPR, 28% of CC had residual leaning ≥2.5 kg and 89% had residual leaning ≥0.5 kg. Conclusions Leaning during CPR increases intrathoracic pressure, decreases coronary perfusion pressure, and decreases cardiac output and myocardial blood flow. Leaning is common during CPR. PMID:22208173

Lean Transformation Guidance: Why Organizations Fail To Achieve and Sustain Excellence Through Lean Improvement

Directory of Open Access Journals (Sweden)

Mohammed Hamed Ahmed

2013-06-01

Full Text Available Many companies are complaining that lean didn’t achieve their long-term goals, and the improvement impact was very short-lived. 7 out of each 10 lean projects fail as companies try to use lean like a toolkit, copying and pasting the techniques without trying to adapt the employee’s culture, manage the improvement process, sustain the results, and develop their leaders. When the Toyota production system was created, the main goal was to remove wastes from the shop floor using some lean techniques and tools. What was not clear is that this required from Toyota a long process of leadership development, and a high commitment to training and coaching their employee. A Failure to achieve and sustain the improvement is a problem of both management and leadership as well as the improper understanding of the human behavior, and the required culture to success.

The contribution of lean thinking to the maintenance of manufacturing systems

OpenAIRE

Davies, Christopher

2003-01-01

Despite many significant contributions and advances of lean thinking recorded in articles, books, and industrial case studies, its impact upon the maintenance function has not been fully investigated. From a maintenance perspective, excluding TPM, little or no insight into the use of lean thinking concepts in maintenance can be found in the literature, despite prominent contributors advocating greater management and business integration. An objective of the research describe...

Extraction of plutonium from lean residues by room-temperature fluoride volatility

International Nuclear Information System (INIS)

Campbell, G.M.; Foropoulos, J.; Kennedy, R.C.; Dye, B.A.; Behrens, R.G.

1990-01-01

The use of dioxygen difluoride and krypton difluoride for the recovery of plutonium from lean residues by conversion to gaseous plutonium hexa-fluoride is being investigated. The synthesis of dioxygen difluoride in practical quantity has been demonstrated. Fluorination of plutonium compounds under ideal conditions supports the contention that a viable process can be developed. Application of the method to lean plutonium residues is in the early stage of development

A nanoplasmonic switch based on molecular machines

KAUST Repository

Zheng, Yue Bing

2009-06-01

We aim to develop a molecular-machine-driven nanoplasmonic switch for its use in future nanophotonic integrated circuits (ICs) that have applications in optical communication, information processing, biological and chemical sensing. Experimental data show that an Au nanodisk array, coated with rotaxane molecular machines, switches its localized surface plasmon resonances (LSPR) reversibly when it is exposed to chemical oxidants and reductants. Conversely, bare Au nanodisks and disks coated with mechanically inert control compounds, do not display the same switching behavior. Along with calculations based on time-dependent density functional theory (TDDFT), these observations suggest that the nanoscale movements within surface-bound "molecular machines" can be used as the active components in plasmonic devices. ©2009 IEEE.

Estimation of lean and fat composition of pork ham using image processing measurements

Science.gov (United States)

Jia, Jiancheng; Schinckel, Allan P.; Forrest, John C.

1995-01-01

This paper presents a method of estimating the lean and fat composition in pork ham from cross-sectional area measurements using image processing technology. The relationship between the quantity of ham lean and fat mass with the ham lean and fat areas was studied. The prediction equations for pork ham composition based on the ham cross-sectional area measurements were developed. The results show that ham lean weight was related to the ham lean area (r equals .75, P lean weight was highly related to the product of ham total weight times percentage ham lean area (r equals .96, P product of ham total weight times percentage ham fat area (r equals .88, P lean weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 92%. The best combination of independent variables for estimating ham fat weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 78%. Prediction equations with either two or three independent variables did not significantly increase the accuracy of prediction. The results of this study indicate that the weight of ham lean and fat could be predicted from ham cross-sectional area measurements using image analysis in combination with wholesale ham weight.

Lean management in a non-manufacturing organization

Directory of Open Access Journals (Sweden)

Mladen Žvorc

2013-12-01

Full Text Available This paper examines the possibilities of a lean approach to non-manufacturing functions, i.e. a market-oriented organization. This refers to purchasing, shipment, storage, sale and delivery of goods; marketing, etc. A lean approach to business operations is discussed and several lean business methods are developed on the basis of which lean management can be used not only in manufacturing, but also in non-manufacturing organizations.

Lean in Air Permitting Guide

Science.gov (United States)

The Lean in Air Permitting Guide is designed to help air program managers at public agencies better understand the potential value and results that can be achieved by applying Lean improvement methods to air permitting processes.

Analytical Investigation on the Power Factor of a Flux-Modulated Permanent-Magnet Synchronous Machine

DEFF Research Database (Denmark)

Zhang, Xiaoxu; Liu, Xiao; Liu, Jinglin

2015-01-01

Flux-modulated permanent-magnet synchronous machine (FM-PMSM) is characterized as a high-torque direct-drive electrical machine, but may suffer from the low power factor. This paper aims to investigate the issue of the low power factor in theory and explore the possibilities for improvement...

Adsorption Machine & Desiccant Wheel based SOLAR COOLING in a Second Law perspective

OpenAIRE

Bivona, Santo

2011-01-01

This thesis work is intended to investigate energy and exergy performance of a low power prototype solar air conditioning system based on sorption materials. Its performance is analyzed in the light of both the First and Second Law of Thermodynamics and compared with conventional HVAC systems as well as with a further solar cooling technology based on desiccant wheels (Solar DEC). The adsorption machine based solar cooling plant was thoroughly designed and its thermal performance analysed ...

Formal modeling of virtual machines

Science.gov (United States)

Cremers, A. B.; Hibbard, T. N.

1978-01-01

Systematic software design can be based on the development of a 'hierarchy of virtual machines', each representing a 'level of abstraction' of the design process. The reported investigation presents the concept of 'data space' as a formal model for virtual machines. The presented model of a data space combines the notions of data type and mathematical machine to express the close interaction between data and control structures which takes place in a virtual machine. One of the main objectives of the investigation is to show that control-independent data type implementation is only of limited usefulness as an isolated tool of program development, and that the representation of data is generally dictated by the control context of a virtual machine. As a second objective, a better understanding is to be developed of virtual machine state structures than was heretofore provided by the view of the state space as a Cartesian product.

Lean-Prinzipien für verbesserte Kosteneffizienz: Instandhaltungseffizienz durch Lean Maintenance

OpenAIRE

Bandow, G.; Schmidt, A.

2008-01-01

Die Bedeutung der Instandhaltung nimmt weiter zu. In einem Lean Umfeld mit einer immer verschwendungsärmeren Produktion stehen nicht nur die Kosteneffizienz und Verfügbarkeit der Produktionsmittel im Fokus. Unplanmäßige Stillstände kosten Geld und gefährden häufig auch Personal und Produkt. Lean Maintenance vermeidet Verschwendung und optimiert so die Effektivität und Effizienz der Instandhaltung. Das zielgerichtete Zusammenspiel von Menschen, Prozessen und Technik garantiert dabei den Erfolg...

Experience in applying lean production concepts in the service sector

Directory of Open Access Journals (Sweden)

Dyrina Evgeniya

2016-01-01

Full Text Available This article describes the experience of implementing lean production tools in the company services. The authors have based the research of the chef’s work, built Ishikawa’s diagram on one of the most important problems of the company and proposed the cyclogram of cooks at work. Problems were identified using this technology after analyzing domestic and foreign experience in implementing lean production. The algorithm for implementing lean production and the necessary tools for achievement of the goals of the enterprise were authored on the basis of experience gained analyses of theoretical materials, which were tested on the basis of the small business «White Dragon».

Developing A Strategy to Enact Lean

Directory of Open Access Journals (Sweden)

Nicola Morrey

2013-01-01

Full Text Available This paper explains the strategy employed by a case study company to implement lean across the business, and to reflect on the success of this approach so other companies may consider this learning and how it might be useful to them. The strategy to enact lean in the case study company was based on creating a number of standard tools/ways of working. These tools can be considered to be standardised work for key aspects of the construction process that the company undertakes. The aim of the tools was to ensure that critical tasks would be carried out to the correct standard (quality, time, cost, health and safety every time, across the business. Achievement of this is expected to lead to improved performance and elimination of variation (waste. To implement this strategy of using standardised work to eliminate variation and lead to improved performance, a step-by-step process was developed to create the tools/standardised work. The paper describes the process that was undertaken and how it aimed to not only produce a number of tools/standardised work, but also to involve people and managers from across the business such that lean philosophy and thinking might also begin to become embedded. The paper will firstly explain, with reference to the relevant literature, how and why the strategy to implement standardised work was chosen, the process that was defined to develop the standardised work, and what happened when that process was put into practice. The findings of the paper show that whilst the completed tools delivered business benefits, the development of the tools did not follow the planned process. The paper discusses how people within the business responded to this strategy and how the process had to be continuously adapted to cope with the current business environment and path dependencies, further evidencing that lean implementations need to be tailored to suit the needs of the individual firm, rather than there being a one size fits all

Redesigning assembly stations using ergonomic methods as a lean tool.

Science.gov (United States)

Eswaramoorthi, M; John, Mervyn; Rajagopal, C Arjun; Prasad, P S S; Mohanram, P V

2010-01-01

With the current state of the global economy, demand for various products plummeting. To sustain in the market, companies have to reduce cost and improve quality. Today, companies have started implementing new philosophies like TQM, TPM, six sigma and lean manufacturing techniques to remain competitive in the market. Lean manufacturing is an emerging philosophy which continuously strives to reduce waste. The main objective of analyzing the assembly line with a lean perspective is to identify the areas related to human interface with other systems that could lead to the generation of waste. Improper workplace design leads to unreasonable mental or physical burden and results in waste generation like slow work (delay and inventory), and defects, which is named as muri waste. An attempt has been made in this paper to locate muri waste and create a "Lean assembly line". The proposed method, based on the use of Rapid Upper Limb Assessment (RULA) with CATIA V5 platform, has allowed the measurement of a large set of operator posture parameters and assessment of ergonomic stresses. Based on the results, the process stations in the assembly line were redesigned to prevent the generation of waste.

Research on machine learning framework based on random forest algorithm

Science.gov (United States)

Ren, Qiong; Cheng, Hui; Han, Hai

2017-03-01

With the continuous development of machine learning, industry and academia have released a lot of machine learning frameworks based on distributed computing platform, and have been widely used. However, the existing framework of machine learning is limited by the limitations of machine learning algorithm itself, such as the choice of parameters and the interference of noises, the high using threshold and so on. This paper introduces the research background of machine learning framework, and combined with the commonly used random forest algorithm in machine learning classification algorithm, puts forward the research objectives and content, proposes an improved adaptive random forest algorithm (referred to as ARF), and on the basis of ARF, designs and implements the machine learning framework.

TH-C-9A-01: Lean Tools and Methods

International Nuclear Information System (INIS)

Rangaraj, D; Chan, K; Boddu, S; Pawlicki, T; Dieterich, S

2014-01-01

Lean thinking has revolutionized the manufacturing industry. Toyota has pioneered and leveraged this aspect of Lean thinking. Application of Lean thinking and Lean Six Sigma techniques into Healthcare and in particular in Radiation Oncology has its merits and challenges. To improve quality, safety and patient satisfaction with available resources or reducing cost in terms of time, staff and resources is demands of today's healthcare. Radiation oncology treatment involves many processes and steps, identifying and removing the non-value added steps in a process can significantly improve the efficiency. Real projects undertaken in radiation oncology department in cutting down the procedure time for MRI guided brachytherapy to 40% less using lean thinking will be narrated. Simple Lean tools and techniques such as Gemba walk, visual control, daily huddles, standard work, value stream mapping, error-proofing, etc. can be applied with existing resources and how that improved the operation in a Radiation Oncology department's two year experience will be discussed. Lean thinking focuses on identifying and solving the root-cause of a problem by asking “Why” and not “Who” and this requires a culture change of no blame. Role of leadership in building lean culture, employee empowerment and trains and develops lean thinkers will be presented. Why Lean initiatives fail and how to implement lean successfully in your clinic will be discussed. Learning Objectives: Concepts of lean management or lean thinking. Lean tools and techniques applied in Radiation Oncology. Implement no blame culture and focus on system and processes. Leadership role in implementing lean culture. Challenges for Lean thinking in healthcare

TH-C-9A-01: Lean Tools and Methods

Energy Technology Data Exchange (ETDEWEB)

Rangaraj, D [Baylor Scott and White Health, Temple, TX (United States); Chan, K [Princess Margaret Hospital, Toronto (Canada); Boddu, S [Temple, TX (United States); Pawlicki, T [UC San Diego, La Jolla, CA (United States); Dieterich, S [UC Davis Medical Center, Sacramento, CA (United States)

2014-06-15

Lean thinking has revolutionized the manufacturing industry. Toyota has pioneered and leveraged this aspect of Lean thinking. Application of Lean thinking and Lean Six Sigma techniques into Healthcare and in particular in Radiation Oncology has its merits and challenges. To improve quality, safety and patient satisfaction with available resources or reducing cost in terms of time, staff and resources is demands of today's healthcare. Radiation oncology treatment involves many processes and steps, identifying and removing the non-value added steps in a process can significantly improve the efficiency. Real projects undertaken in radiation oncology department in cutting down the procedure time for MRI guided brachytherapy to 40% less using lean thinking will be narrated. Simple Lean tools and techniques such as Gemba walk, visual control, daily huddles, standard work, value stream mapping, error-proofing, etc. can be applied with existing resources and how that improved the operation in a Radiation Oncology department's two year experience will be discussed. Lean thinking focuses on identifying and solving the root-cause of a problem by asking “Why” and not “Who” and this requires a culture change of no blame. Role of leadership in building lean culture, employee empowerment and trains and develops lean thinkers will be presented. Why Lean initiatives fail and how to implement lean successfully in your clinic will be discussed. Learning Objectives: Concepts of lean management or lean thinking. Lean tools and techniques applied in Radiation Oncology. Implement no blame culture and focus on system and processes. Leadership role in implementing lean culture. Challenges for Lean thinking in healthcare.

Role of protein and amino acids in promoting lean mass accretion with resistance exercise and attenuating lean mass loss during energy deficit in humans.

Science.gov (United States)

Churchward-Venne, Tyler A; Murphy, Caoileann H; Longland, Thomas M; Phillips, Stuart M

2013-08-01

Amino acids are major nutrient regulators of muscle protein turnover. After protein ingestion, hyperaminoacidemia stimulates increased rates of skeletal muscle protein synthesis, suppresses muscle protein breakdown, and promotes net muscle protein accretion for several hours. These acute observations form the basis for strategized protein intake to promote lean mass accretion, or prevent lean mass loss over the long term. However, factors such as protein dose, protein source, and timing of intake are important in mediating the anabolic effects of amino acids on skeletal muscle and must be considered within the context of evaluating the reported efficacy of long-term studies investigating protein supplementation as part of a dietary strategy to promote lean mass accretion and/or prevent lean mass loss. Current research suggests that dietary protein supplementation can augment resistance exercise-mediated gains in skeletal muscle mass and strength and can preserve skeletal muscle mass during periods of diet-induced energy restriction. Perhaps less appreciated, protein supplementation can augment resistance training-mediated gains in skeletal muscle mass even in individuals habitually consuming 'adequate' (i.e., >0.8 g kg⁻¹ day⁻¹) protein. Additionally, overfeeding energy with moderate to high-protein intake (15-25 % protein or 1.8-3.0 g kg⁻¹ day⁻¹) is associated with lean, but not fat mass accretion, when compared to overfeeding energy with low protein intake (5 % protein or ~0.68 g kg⁻¹ day⁻¹). Amino acids represent primary nutrient regulators of skeletal muscle anabolism, capable of enhancing lean mass accretion with resistance exercise and attenuating the loss of lean mass during periods of energy deficit, although factors such as protein dose, protein source, and timing of intake are likely important in mediating these effects.

Sustainable cost reduction by lean management in metallurgical processes

Directory of Open Access Journals (Sweden)

A. V. Todorut

2016-10-01

Full Text Available This paper focuses on the need for sustainable cost reduction in the metallurgical industry by applying Lean Management (LM tools and concepts in metallurgical production processes leading to increased competitiveness of corporations in a global market. The paper highlights that Lean Management is a novel way of thinking, adapting to change, reducing waste and continuous improvement, leading to sustainable development of companies in the metallurgical industry. The authors outline the main Lean Management instruments based on recent scientific research and include a comparative analysis of other tools, such as Sort, Straighten, Shine, Standardize, Sustain (5S, Visual Management (VM, Kaizen, Total Productive Maintenance (TPM, Single-Minute Exchange of Dies (SMED, leading to a critical appraisal of their application in the metallurgical industry.

Correlates of increased lean muscle mass in women with polycystic ovary syndrome.

Science.gov (United States)

Carmina, E; Guastella, E; Longo, R A; Rini, G B; Lobo, R A

2009-10-01

Muscle mass plays an important role in determining cardiovascular and metabolic risks in polycystic ovary syndrome (PCOS). In addition, whether lean mass influences carotid intima-media thickness (IMT) in PCOS has not been assessed. Prospective investigation. Ninety-five women with PCOS were age- and weight-matched to 90 ovulatory controls. All women had dual X-ray absorptiometry for lean, fat and bone mass, and bone mass density (BMD). Serum testosterone, sex hormone-binding globulin, insulin, and glucose and carotid IMT were determined. Free androgen index (FAI) and insulin resistance (by QUICKI) were calculated. In PCOS, waist circumference and insulin were higher and QUICKI lower than in controls (Plean mass were higher in PCOS compared to controls (PPCOS (PPCOS patients had abnormal (> or = 0.9 mm) values. Lean mass correlated with fat parameters, insulin, QUICKI, and FAI, but not with total testosterone; and after adjustments for insulin and QUICKI, lean mass still correlated with fat mass (PLean mass correlated with IMT (Plean mass independently of insulin. Bone mass correlated with lean and fat mass, but not with insulin or androgen. PCOS patients with 'pathological' IMT values had higher % trunk fat, lean mass, and insulin, lower QUICKI, and higher testosterone and FAI compared with those with normal IMT. Lean mass is increased in PCOS, while bone mass is similar to that of matched controls. The major correlates of lean mass are fat mass and insulin but not androgen. Lean mass also correlated with IMT, and although influenced by insulin, small changes in IMT may partially reflect changes in muscle mass, while clearly abnormal values relate to more severe abnormalities of PCOS.

A Cross-Wavelet Transform Aided Rule Based Approach for Early Prediction of Lean Blow-out in Swirl-Stabilized Dump Combustor

Directory of Open Access Journals (Sweden)

Debangshu Dey

2015-03-01

Full Text Available Lean or ultralean combustion is one of the popular strategies to achieve very low emission levels. However, it is extremely susceptible to lean blow-out (LBO. The present work explores a Cross-wavelet transform (XWT aided rule based scheme for early prediction of lean blowout. XWT can be considered as an advancement of wavelet analysis which gives correlation between two waveforms in time-frequency space. In the present scheme a swirl-stabilized dump combustor is used as a laboratory-scale model of a generic gas turbine combustor with LPG as fuel. Various time series data of CH chemiluminescence signal are recorded for different flame conditions by varying equivalence ratio, flow rate and level of air-fuel premixing. Some features are extracted from the cross-wavelet spectrum of the recorded waveforms and a reference wave. The extracted features are observed to classify the flame condition into three major classes: near LBO, moderate and healthy. Moreover, a Rough Set based technique is also applied on the extracted features to generate a rule base so that it can be fed to a real time controller or expert system to take necessary control action to prevent LBO. Results show that the proposed methodology performs with an acceptable degree of accuracy.

Predictive Analysis for the Thermal Diffusion of the Plasma-Assisted Machining of Superalloy Inconel-718 Based on Exponential Smoothing

Directory of Open Access Journals (Sweden)

Chen Shao-Hsien

2018-01-01

Full Text Available Nickel base and titanium base materials have been widely applied to engines in aerospace industry, and these engines are essential components of airplanes. The machining characteristics of aerospace materials may cause machining cutters to be worn down in a short time and thus reduce the accuracy of processing. The plasma-assisted machining adopted in the research is a kind of the complex machining method. In the cases of nickel base and titanium base alloys, the method can heat workpieces in an extremely short duration to soften the materials for the ease of cutting so that the cutting force, cutter wear, and machining cost will all be reduced. The research adopted plasma heating to soften parts of the materials and aimed to explore the heating of nickel base alloy. The temperature variation of the materials was investigated and measured by adjusting the current and feed velocity. Moreover, Inconel-718 superalloy was adopted for the comparison with nickel base alloy for the observation of the influence and change brought by heat, and the method of exponential smoothing was adopted to conduct the prediction and analysis of thermal diffusion for understanding the influence and change brought by electric current on nickel base materials. Finally, given the current from 20 A to 80 A and feed velocity from 1,000 mm/min to 3,000 mm/min, the influence of thermal diffusion was investigated and the related model was built.

Connection machine: a computer architecture based on cellular automata

Energy Technology Data Exchange (ETDEWEB)

Hillis, W D

1984-01-01

This paper describes the connection machine, a programmable computer based on cellular automata. The essential idea behind the connection machine is that a regular locally-connected cellular array can be made to behave as if the processing cells are connected into any desired topology. When the topology of the machine is chosen to match the topology of the application program, the result is a fast, powerful computing engine. The connection machine was originally designed to implement knowledge retrieval operations in artificial intelligence programs, but the hardware and the programming techniques are apparently applicable to a much larger class of problems. A machine with 100000 processing cells is currently being constructed. 27 references.

Leaning in to "muddy" interviews

DEFF Research Database (Denmark)

Lippke, Lena; Tanggaard, Lene

2014-01-01

Over the last few decades, qualitative research has been acknowledged as a peopled practice in which subjectivities come into play. The main argument presented in this article is that qualitative research involves “muddy,” troublesome, interactional passages, because of a complex interplay between...... situated identities among the participants cross each other. We emphasize the value of daring to lean in to the muddiness of peopled research, use it as an analytical tool and present it in its imperfect form. This approach contributes to transparency in qualitative research, opens up the data in a new way...... subjectivities, situated identities, emotions, and conversational genres. Based on ethnographic fieldwork at a Danish Vocational Educational Training College, we introduce the concept of “leaning in” to provide an analytical grasp of the “muddy” interactional tension field in an interview situation, in which...

Exploiting machine learning algorithms for tree species classification in a semiarid woodland using RapidEye image

CSIR Research Space (South Africa)

Adelabu, S

2013-11-01

Full Text Available in semiarid environments. In this study, we examined the suitability of 5-band RapidEye satellite data for the classification of five tree species in mopane woodland of Botswana using machine leaning algorithms with limited training samples. We performed...

Numerical investigation of refrigeration machine compressor operation considering single-phase electric motor dynamic characteristics

Science.gov (United States)

Baidak, Y.; Smyk, V.

2017-08-01

Using as the base the differential equations system which was presented in relative units for generalized electric motor of hermetic refrigeration compressor, mathematical model of the software for dynamic performance calculation of refrigeration machine compressors drive low-power asynchronous motors was developed. Performed on its ground calculations of the basic model of two-phase electric motor drive of hermetic compressor and the proposed newly developed model of the motor with single-phase stator winding, which is an alternative to the industrial motor winding, have confirmed the benefits of the motor with innovative stator winding over the base engine. Given calculations of the dynamic characteristics of compressor drive motor have permitted to determine the value of electromagnetic torque swinging for coordinating compressor and motor mechanical characteristics, and for taking them into consideration in choosing compressor elements construction materials. Developed and used in the process of investigation of refrigeration compressor drive asynchronous single-phase motor mathematical and software can be considered as an element of computer-aided design system for design of the aggregate of refrigeration compression unit refrigerating machine.

Rethinking Lean Service

Science.gov (United States)

Seddon, John; O'Donovan, Brendan; Zokaei, Keivan

Ever since Levitt's influential Harvard Business Review article 'Production-Line Approach to Service' was published in 1972, it has been common for services to be treated like production lines in both the academic literature and more widely in management practice. The belief that achieving economies of scale will reduce unit costs is a common feature of management decision-making. As technological advancement has produced ever more sophisticated IT and telephony, it has become increasingly easier for firms to standardise and off-shore services. The development of the 'lean' literature has only helped to emphasise the same underlying management assumptions: by managing cost and workers' activity, organisational performance is expected to improve. This chapter argues that through misinterpretation of the core paradigm 'lean' has become subsumed into the 'business as usual' of conventional service management. As a result, 'lean' has become synonymous with 'process efficiency' and the opportunity for significant performance improvement - as exemplified by Toyota - has been missed.

Improving road transport operations through lean thinking: A case study

OpenAIRE

Villarreal, B.; Garza-Reyes, J. A.; Kumar, V.; Lim, M. K.

2017-01-01

Traditionally, logistics and transportation problems have been addressed through mathematical modelling, operations research, and simulation methods. This paper documents a case study where the road transport operations of a leading Mexican brewery organisation have been improved through lean thinking and waste reduction. Two lean-based principles and tools were combined; the Seven Transportation Extended Wastes (STEWs) and Transportation Value Stream Mapping (TVSM), and three systematic step...

Quiescent plasma machine for plasma investigation

International Nuclear Information System (INIS)

Ferreira, J.L.

1993-01-01

A large volume quiescent plasma device is being developed at INPE to study Langmuir waves and turbulence generated by electron beams (E b ≤ 500 e V) interacting with plasma. This new quiescent plasma machine was designed to allow the performance of several experiments specially those related with laboratory space plasma simulation experiments. Current-driven instabilities and related phenomena such as double-layers along magnetic field lines are some of the many experiments planned for this machine. (author)

Lean consumption.

Science.gov (United States)

Womack, James P; Jones, Daniel T

2005-03-01

During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

Lean in the supply chain : research and practice

OpenAIRE

Ugochukwu, Paschal

2012-01-01

Lean is a management philosophy that enhances customer value through waste elimination and continuous improvement in a system by applying lean principles, practices, and techniques. The focus on lean implementations and research had been typically a single company without extension to the entire supply chain. When the concept of lean is implemented across the entire supply chain, however, it is referred to as lean supply chain. The purpose of this thesis is to create a structure from theory a...

Lean and Efficient Software: Whole Program Optimization of Executables

Science.gov (United States)

2016-12-31

19b. TELEPHONE NUMBER (Include area code) 12/31/2016 Final Technical Report (Phase I - Base Period) 30-06-2014 - 31-12-2016 Lean and Efficient...Software: Whole-Program Optimization of Executables Final Report Evan Driscoll Tom Johnson GrammaTech, Inc. 531 Esty Street Ithaca, NY 14850 Office of...hardening U U U UU 30 Tom Johnson (607) 273-7340 x.134 Page 1 of 30 “ Lean and Efficient Software: Whole-Program Optimization of Executables

Lean Six Sigma in financial services

OpenAIRE

de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

2008-01-01

Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant results and breakthrough improvements in financial services, as demonstrated with four case studies from Dutch multinational insurance companies. These cases demonstrate the importance of incremental i...

Lean and psychosocial work environment in manufacturing

DEFF Research Database (Denmark)

Edwards, Kasper; Thye, Nina; Nielsen, Anders P.

2011-01-01

Lean is currently the rationalization method of choice in the Danish manufacturing industry. This paper reports finding from three lean implementation cases. All cases are manufacturing companies focusing on upmarket products produced in small series. Prior to lean production was organized as sel...

A Sand Cone Model of Lean Implementation

OpenAIRE

Yestemessov, Azamat

2011-01-01

Over the past 20 years Lean Production system has been a focus of researches by different academicians. A numerous works have been written in the field of Lean implementation in manufacturing companies. However, as shown, most of the academic topics relate to the issues of implementing Lean tools and techniques. Critical Success Factors have been also described widely; however, no efforts in systematization have been made. Only several works have a focus on integration of Lean implementation ...

Scaling Lean in primary care: impacts on system performance.

Science.gov (United States)

Hung, Dorothy Y; Harrison, Michael I; Martinez, Meghan C; Luft, Harold S

2017-03-01

We examined a wide range of performance outcomes after Lean methodology-a leading strategy to enhance efficiency and patient value-was implemented and scaled across all primary care clinics in a nonprofit, ambulatory care delivery system. Using a stepped wedge approach, we assessed changes associated with the phased introduction of Lean-based redesigns across 46 primary care departments in 17 different clinic locations. Longitudinal analysis of operational metrics included: workflow efficiency, physician productivity, operating expenses, clinical quality, and satisfaction among patients, physicians, and staff. We used interrupted time series analysis with generalized linear mixed models to estimate Lean impacts over time. Projected outcomes in the absence of changes (ie, counterfactuals) were compared with observed outcomes after Lean redesigns were implemented, and mean differences were assessed using 95% bias-corrected bootstrap confidence intervals (CIs). We observed systemwide improvements in workflow efficiencies (eg, 95% CI, 5.8-10.4) and physician productivity (95% CI, 3.9-27.2), with no adverse effects on clinical quality. Patient satisfaction increased with respect to access to care (95% CI, 15.2-20.7), handling of personal issues (95% CI, 2.1-6.9), and overall experience of care (95% CI, 11.0-17.0), but decreased with respect to interactions with care providers (95% CI, -13.4 to -5.7). Departmental operating costs decreased, and annual staff and physician satisfaction scores increased particularly among early adopters, with key improvements in employee engagement, connection to purpose, relationships with staff, and physician time spent working. Lean redesigns can benefit primary care patients, physicians, and staff without negatively impacting the quality of clinical care. Study results may lead other delivery system leaders to innovate using Lean techniques and may further enhance support for Lean learning among public and private payers.

Lean in healthcare: the unfilled promise?

Science.gov (United States)

Radnor, Zoe J; Holweg, Matthias; Waring, Justin

2012-02-01

In an effort to improve operational efficiency, healthcare services around the world have adopted process improvement methodologies from the manufacturing sector, such as Lean Production. In this paper we report on four multi-level case studies of the implementation of Lean in the English NHS. Our results show that this generally involves the application of specific Lean 'tools', such as 'kaizen blitz' and 'rapid improvement events', which tend to produce small-scale and localised productivity gains. Although this suggests that Lean might not currently deliver the efficiency improvements desired in policy, the evolution of Lean in the manufacturing sector also reveals this initial focus on the 'tool level'. In moving to a more system-wide approach, however, we identify significant contextual differences between healthcare and manufacturing that result in two critical breaches of the assumptions behind Lean. First, the customer and commissioner in the private sector are the one and the same, which is essential in determining 'customer value' that drives process improvement activities. Second, healthcare is predominantly designed to be capacity-led, and hence there is limited ability to influence demand or make full use of freed-up resources. What is different about this research is that these breaches can be regarded as not being primarily 'professional' in origin but actually more 'organisational' and 'managerial' and, if not addressed could severely constrain Lean's impact on healthcare productivity at the systems level. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effect of engine-based thermal aging on surface morphology and performance of Lean NOx Traps

International Nuclear Information System (INIS)

Toops, Todd J.; Bunting, Bruce G.; Nguyen, Ke; Gopinath, Ajit

2007-01-01

A small single-cylinder diesel engine is used to thermally age model (Pt + Rh/Ba/γ-Al 2 O 3 ) lean NO x traps (LNTs) under lean/rich cycling at target temperatures of 600 C, 700 C, and 800 C. During an aging cycle, fuel is injected into the exhaust to achieve reproducible exotherms under lean and rich conditions with the average temperature approximating the target temperature. Aging is performed until the cycle-average NO x conversion measured at 400 C is approximately constant. Engine-based NO x conversion decreased by 42% after 60 cycles at 600 C, 36% after 76 cycles at 700 C and 57% after 46 cycles at 800 C. The catalyst samples were removed and characterized by XRD and using a microreactor that allowed controlled measurements of surface area, precious metal size, NO x storage, and reaction rates. Three aging mechanisms responsible for the deactivation of LNTs have been identified: (1) loss of dispersion of the precious metals, (2) phase transitions in the washcoat materials, and (3) loss of surface area of the storage component and support. These three mechanisms are accelerated when the aging temperature exceeds 850 C - the γ to (delta) transition temperature of Al 2 O 3 . Normalization of rates of NO reacted at 400 C to total surface area demonstrates the biggest impact on performance stems from surface area losses rather than from precious metal sintering. (author)

Parametric study of turbine NGV blade lean and vortex design

Directory of Open Access Journals (Sweden)

Zhang Shaowen

2016-02-01

Full Text Available The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mechanisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.

Mlifdect: Android Malware Detection Based on Parallel Machine Learning and Information Fusion

Directory of Open Access Journals (Sweden)

Xin Wang

2017-01-01

Full Text Available In recent years, Android malware has continued to grow at an alarming rate. More recent malicious apps’ employing highly sophisticated detection avoidance techniques makes the traditional machine learning based malware detection methods far less effective. More specifically, they cannot cope with various types of Android malware and have limitation in detection by utilizing a single classification algorithm. To address this limitation, we propose a novel approach in this paper that leverages parallel machine learning and information fusion techniques for better Android malware detection, which is named Mlifdect. To implement this approach, we first extract eight types of features from static analysis on Android apps and build two kinds of feature sets after feature selection. Then, a parallel machine learning detection model is developed for speeding up the process of classification. Finally, we investigate the probability analysis based and Dempster-Shafer theory based information fusion approaches which can effectively obtain the detection results. To validate our method, other state-of-the-art detection works are selected for comparison with real-world Android apps. The experimental results demonstrate that Mlifdect is capable of achieving higher detection accuracy as well as a remarkable run-time efficiency compared to the existing malware detection solutions.

Lean Implementation : the significance of people and dualism

OpenAIRE

Bengt, Halling

2013-01-01

Lean, with its origins at the Toyota Motor Company, is a concept that is known to increase effectiveness in manufacturing. The Lean concept is now argued to be relevant not only in manufacturing but in service and health-care delivery as well. The reported results of Lean implementation efforts are divided. There are reports that most of the Lean implementation efforts are not reaching the goal; on the other hand, there are reports of promising results. The divided results from Lean implement...

Guiding inpatient quality improvement: a systematic review of Lean and Six Sigma.

Science.gov (United States)

Glasgow, Justin M; Scott-Caziewell, Jill R; Kaboli, Peter J

2010-12-01

Two popular quality improvement (QI) approaches in health care are Lean and Six Sigma. Hospitals continue to adopt these QI approaches-or the hybrid Lean Sigma approach-with little knowledge on how well they produce sustainable improvements. A systematic literature review was conducted to determine whether Lean, Six Sigma, or Lean Sigma have been effectively used to create and sustain improvements in the acute care setting. Databases were searched for articles published in the health care, business, and engineering literatures. Study inclusion criteria required identification of a Six Sigma, Lean, or Lean Sigma project; QI efforts focused on hospitalized patients; descriptions of project improvements; and reported results. Depending on the quality of data reported, articles were classified as summary reports, pre-post observational studies, or time-series reports. Database searches identified 539 potential articles. After review of titles, abstracts, and full text, 47 articles met inclusion criteria--10 articles summarized multiple projects, 12 reported Lean projects, 20 reported Six Sigma projects, and 5 reported Lean Sigma projects. Generally, the studies provided limited data, with only 15 articles providing any sort of follow-up data; of the 15, only 3 report a follow-up period greater than two years. Lean, Six Sigma, and Lean Sigma as QI approaches can aid institutions in tackling a wide variety of problems encountered in acute care. However, the true impact of these approaches is difficult to judge, given that the lack of rigorous evaluation or clearly sustained improvements provides little evidence supporting broad adoption. There is still a need for future work that will improve the evidence base for understanding more about QI approaches and how to achieve sustainable improvement.

BEBP: An Poisoning Method Against Machine Learning Based IDSs

OpenAIRE

Li, Pan; Liu, Qiang; Zhao, Wentao; Wang, Dongxu; Wang, Siqi

2018-01-01

In big data era, machine learning is one of fundamental techniques in intrusion detection systems (IDSs). However, practical IDSs generally update their decision module by feeding new data then retraining learning models in a periodical way. Hence, some attacks that comprise the data for training or testing classifiers significantly challenge the detecting capability of machine learning-based IDSs. Poisoning attack, which is one of the most recognized security threats towards machine learning...

A Wavelet Kernel-Based Primal Twin Support Vector Machine for Economic Development Prediction

Directory of Open Access Journals (Sweden)

Fang Su

2013-01-01

Full Text Available Economic development forecasting allows planners to choose the right strategies for the future. This study is to propose economic development prediction method based on the wavelet kernel-based primal twin support vector machine algorithm. As gross domestic product (GDP is an important indicator to measure economic development, economic development prediction means GDP prediction in this study. The wavelet kernel-based primal twin support vector machine algorithm can solve two smaller sized quadratic programming problems instead of solving a large one as in the traditional support vector machine algorithm. Economic development data of Anhui province from 1992 to 2009 are used to study the prediction performance of the wavelet kernel-based primal twin support vector machine algorithm. The comparison of mean error of economic development prediction between wavelet kernel-based primal twin support vector machine and traditional support vector machine models trained by the training samples with the 3–5 dimensional input vectors, respectively, is given in this paper. The testing results show that the economic development prediction accuracy of the wavelet kernel-based primal twin support vector machine model is better than that of traditional support vector machine.

Lean Six Sigma implementation and organizational culture.

Science.gov (United States)

Knapp, Susan

2015-01-01

The purpose of this paper is to examine the relationship between four organizational cultural types defined by the Competing Values Framework and three Lean Six Sigma implementation components - management involvement, use of Lean Six Sigma methods and Lean Six Sigma infrastructure. The study involved surveying 446 human resource and quality managers from 223 hospitals located in Maine, New Hampshire, Vermont, Massachusetts and Rhode Island using the Organizational Culture Assessment Instrument. Findings - In total, 104 completed responses were received and analyzed using multivariate analysis of variance. Follow-up analysis of variances showed management support was significant, F(3, 100)=4.89, p cultures having significant interactions with management support. The relationship between organizational culture and Lean Six Sigma in hospitals provides information on how specific cultural characteristics impact the Lean Six Sigma initiative key components. This information assists hospital staff who are considering implementing quality initiatives by providing an understanding of what cultural values correspond to effective Lean Six Sigma implementation. Managers understanding the quality initiative cultural underpinnings, are attentive to the culture-shared values and norm's influence can utilize strategies to better implement Lean Six Sigma.

THE LEAN AND SIX SIGMA SINERGY

Directory of Open Access Journals (Sweden)

Mirko Sokovic

2008-12-01

Full Text Available Many organizations, dealing with continuous improvement methods, have realized that Lean and Six Sigma methodologies complement each other. Lean manufacturing focuses on the remova l of waste so that all processes in the total system add value from the customers' perspectives. The main emphasis of Six Sigma is the application of statistical tools in a disciplined manner, which requires data-driven decision-making. The integration of Lean and Six Sigma provides a synergetic effect, a rapid process improvement strategy for attaining organizational goals. When separated, Lean manufacturing cannot bring a process under statistical control, and Six Sigma cannot dramatically improve cycle time or reduce invested capital. Together, synergistic qualities are created to maximize the potential for a process improvement. The paper deals with Lean and Six Sigma principles and approaches used in modern manufacturing for process improvements, and bring forward benefits that are gained when these two methodologies are integrated.

Performance Improvement through Implementation of Lean Maintenance

OpenAIRE

S. Kolanjiappan; Dr. K. Maran

2011-01-01

Lean Maintenance is a relatively new term, invented in the last decade of the twentieth century, but the principles are well established in Total Productive Maintenance (TPM). Lean Maintenance—taking its lead from Lean Manufacturing—applies some new techniques to TPM concepts to render a more structured implementation path. Tracing its roots back to Henry Ford with modern refinements born in Japanese manufacturing, specifically the Toyota Production System (TPS). Lean seeks to eliminate a...

Engagement techniques and playing level impact the biomechanical demands on rugby forwards during machine-based scrummaging

OpenAIRE

Preatoni, Ezio; Stokes, Keith A.; England, Michael E.; Trewartha, Grant

2014-01-01

Objectives This cross-sectional study investigated the factors that may influence the physical loading on rugby forwards performing a scrum by studying the biomechanics of machine-based scrummaging under different engagement techniques and playing levels.Methods 34 forward packs from six playing levels performed repetitions of five different types of engagement techniques against an instrumented scrum machine under realistic training conditions. Applied forces and body movements were recorded...

Lean Management Systems in Radiology: Elements for Success.

Science.gov (United States)

Schultz, Stacy R; Ruter, Royce L; Tibor, Laura C

2016-01-01

This article is a review of the literature on Lean and Lean Management Systems and how they have been implemented in healthcare organizations and particularly in radiology departments. The review focuses on the elements required for a successful implementation of Lean by applying the principles of a Lean Management System instead of a Lean tools-only approach. This review shares the successes and failures from healthcare organizations' efforts to improve the quality and safety of the services they provide. There are a limited number of healthcare organizations in the literature who have shared their experiences and additional research is necessary to determine whether a Lean Management System is a viable alternative to the current management structure in healthcare.

On-machine measurement of a slow slide servo diamond-machined 3D microstructure with a curved substrate

International Nuclear Information System (INIS)

Zhu, Wu-Le; Yang, Shunyao; Ju, Bing-Feng; Jiang, Jiacheng; Sun, Anyu

2015-01-01

A scanning tunneling microscope-based multi-axis measuring system is specially developed for the on-machine measurement of three-dimensional (3D) microstructures, to address the quality control difficulty with the traditional off-line measurement process. A typical 3D microstructure of the curved compound eye was diamond-machined by the slow slide servo technique, and then the whole surface was on-machine scanned three-dimensionally based on the tip-tracking strategy by utilizing a spindle, two linear motion stages, and an additional rotary stage. The machined surface profile and its shape deviation were accurately measured on-machine. The distortion of imaged ommatidia on the curved substrate was distinctively evaluated based on the characterized points extracted from the measured surface. Furthermore, the machining errors were investigated in connection with the on-machine measured surface and its characteristic parameters. Through experiments, the proposed measurement system is demonstrated to feature versatile on-machine measurement of 3D microstructures with a curved substrate, which is highly meaningful for quality control in the fabrication field. (paper)

Improving healthcare using Lean processes.

Science.gov (United States)

Baker, G Ross

2014-01-01

For more than a decade, healthcare organizations across Canada have been using Lean management tools to improve care processes, reduce preventable adverse events, increase patient satisfaction and create better work environments. The largest system-wide effort in Canada, and perhaps anywhere, is currently under way in Saskatchewan. The jury is still out on whether Lean efforts in that province, or elsewhere in Canada, are robust enough to transform current delivery systems and sustain new levels of performance. This issue of Healthcare Quarterly features several articles that provide a perspective on Lean methods in healthcare. Copyright © 2014 Longwoods Publishing.

The Hybrid Lean System to Improve Manufacturing Environment

Directory of Open Access Journals (Sweden)

Ahmad Ahmad Nur Aizat

2017-01-01

Full Text Available Lean manufacturing is a systematic approch could increase manufacturing competitiveness by identifying and elminating waste through lean tools. However, these tools are often categorized into different groups, continues to be difficult for companies to select the most appropriate lean tool to be adopted, especially in respect of the SMEs whose knowledge of lean tools and associated principles are limited. This study is to propose solution on how to implement appropriate lean tools in food manufacturing industry located at Rengit, Johor. Qualitative method is used as a methodology to see the changes after the implementation of lean tools. Interview session also a part of method to collect data from respondents. The finding from this paper shows that implementation of an appropriate lean tool will help to eliminate waste in industry sector, maintain and control the inventory, improve quality of the product and improve overall operational process.

Designing Workshops for the Introduction of Lean Enablers to Engineering Programs

DEFF Research Database (Denmark)

Gersing, Kilian; Oehmen, Josef; Rebentisch, Eric Rebentisch

2014-01-01

There is a large and growing body of knowledge regarding so-called Lean best practices, including most recently in the area of program management and systems engineering. However, there is little elaboration of how these documented best practices are to be introduced to a professional workforce. ...... the Lean principles. The framework was validated through interactions with training professionals in a large automobile manufacturer, and using subject matter experts from a variety of industrial sectors. © 2014 The Authors. Published by Elsevier B.V.......There is a large and growing body of knowledge regarding so-called Lean best practices, including most recently in the area of program management and systems engineering. However, there is little elaboration of how these documented best practices are to be introduced to a professional workforce...... the systematic design of workshops focused specifically on the introduction of Lean principles and practices to program management and the professional workforce in a program environment. The framework is based on a thorough review of literature on training, workshop delivery, and Lean principles, as well...

Using Dynamic Value Stream Mapping and Lean Accounting Box Scores to Support Lean Implementation

Science.gov (United States)

Woehrle, Stephen L.; Abou-Shady, Louay

2010-01-01

Lean has proven to be an effective management philosophy for improving businesses in a competitive market by eliminating waste and improving operations. An impact of implementing lean projects is the rapid reduction in inventory levels, which gives management the false impression that profits are decreasing while workers on the shop floor observe…

Development of Novel Methods to Define Deficits in Appendicular Lean Mass Relative to Fat Mass.

Directory of Open Access Journals (Sweden)

David Weber

Full Text Available Recent studies suggest that adjustment of measures of lean mass for adiposity improves associations with physical function. Our objective was to develop and test a method to adjust appendicular lean mass for adiposity.Whole-body DXA data in 14,850 adults in the National Health and Nutrition Examination Survey were used to generate sex-, and race-specific standard deviation scores (Z-Scores relative to age and T-scores relative to 25 year-olds for appendicular lean mass index (ALMI, kg/m2 and fat mass index (FMI, kg/m2. Correlations between ALMI and FMI Z- and T-Scores were assessed within demographic categories. Fat-adjusted ALMI (ALMIFMI scores were determined using residual methods. Sarcopenia was defined as a T-Score 0.50; p<0.001 within all demographic categories. The impact of a unit greater FMI Z-score on ALMI Z-score was less in the elderly, men, white subjects, and among individuals with lower FMI (all tests for interaction p<0.001. There was fair agreement between ALMI and ALMIFMI estimates of sarcopenia and low lean for age [Kappa: 0.46, 0.52, respectively (p<0.0001]. Elderly subjects were likely to be re-classified as sarcopenic while young subjects were likely to be re-classified as normal using ALMIFMI. ALMIFMI T-scores resulted in approximately twice the number of subjects defined as sarcopenic, compared with ALMI T-Scores. (1299 v. 534. Among rheumatoid arthritis patients, ALMIFMI Z-scores correlated with physical function (Health Assessment Questionnaire: rho = -0.22, p = 0.04; Short Physical Performance Battery: rho = 0.27, p = 0.01; however, the ALMI Z-Score did not.Adjustment of ALMI for the confounding association with FMI impacts the definition of lean mass deficits. These methods provide a practical tool for investigators and clinicians based on population-based reference data.

Lean leadership attributes: a systematic review of the literature.

Science.gov (United States)

Aij, Kjeld Harald; Teunissen, Maurits

2017-10-09

Purpose Emphasis on quality and reducing costs has led many health-care organizations to reconfigure their management, process, and quality control infrastructures. Many are lean, a management philosophy with roots in manufacturing industries that emphasizes elimination of waste. Successful lean implementation requires systemic change and strong leadership. Despite the importance of leadership to successful lean implementation, few researchers have probed the question of ideal leadership attributes to achieve lean thinking in health care. The purpose of this paper is to provide insight into applicable attributes for lean leaders in health care. Design/methodology/approach The authors systematically reviewed the literature on principles of leadership and, using Dombrowski and Mielke's (2013) conceptual model of lean leadership, developed a parallel theoretical model for lean leadership in health care. Findings This work contributes to the development of a new framework for describing leadership attributes within lean management of health care. Originality/value The summary of attributes can provide a model for health-care leaders to apply lean in their organizations.

Lean thinking in health and nursing: an integrative literature review.

Science.gov (United States)

Magalhães, Aline Lima Pestana; Erdmann, Alacoque Lorenzini; Silva, Elza Lima da; Santos, José Luís Guedes Dos

2016-08-08

to demonstrate the scientific knowledge developed on lean thinking in health, highlighting the impact and contributions in health care and nursing. an integrative literature review in the PubMed, CINAHL, Scopus, Web of Science, Emerald, LILACS and SciELO electronic library databases, from 2006 to 2014, with syntax keywords for each data base, in which 47 articles were selected for analysis. the categories were developed from the quality triad proposed by Donabedian: structure, process and outcome. Lean thinking is on the rise in health surveys, particularly internationally, especially in the USA and UK, improving the structure, process and outcome of care and management actions. However, it is an emerging theme in nursing. this study showed that the use of lean thinking in the context of health has a transforming effect on care and organizational aspects, promoting advantages in terms of quality, safety and efficiency of health care and nursing focused on the patient. evidenciar o conhecimento científico desenvolvido sobre pensamento Lean na área da saúde, destacando o impacto e as contribuições no cuidado em saúde e enfermagem. revisão integrativa da literatura a partir das bases de dados PubMed, CINAHL, Scopus, Web of Science, Emerald, LILACS e na biblioteca eletrônica SciELO, de 2006 a 2014, com sintaxe de palavras-chaves para cada base, selecionados 47 artigos para análise. as categorias foram elaboradas a partir da tríade de qualidade proposta por Donabedian: estrutura, processo e resultado. O pensamento Lean está em ascensão nas pesquisas sobre saúde, principalmente no âmbito internacional, com destaque para os Estados Unidos e Reino Unido, melhorando a estrutura, o processo e o resultado a partir das ações assistenciais e gerenciais. Porém, é uma temática incipiente na enfermagem. por meio desse estudo observou-se que a utilização do pensamento Lean, no contexto da saúde, tem um efeito transformador nos aspectos assistenciais e

Self-reported physical activity is associated with cognitive function in lean, but not obese individuals.

Science.gov (United States)

Galioto Wiedemann, R; Calvo, D; Meister, J; Spitznagel, M B

2014-12-01

Convergent evidence demonstrates that greater physical activity is associated with better cognitive functioning across many patient and healthy samples. However, this relationship has not been well examined among obese individuals and remains unclear. The present study examined the relationship between performance-based measures of attention/executive function and self-reported physical activity, as measured by the International Physical Activity Questionnaire, among lean (n = 36) and obese (n = 36) college students. Lean individuals performed better than obese individuals on measures of attention/executive function. No significant differences in self-reported physical activity emerged between weight groups. Higher self-reported physical activity was related to faster reaction time in lean individuals but slower reaction time in obese individuals. Additionally, in lean individuals, higher levels of self-reported physical activity were related to more errors on a task of speeded inhibitory control. The results are consistent with previous research demonstrating that greater physical activity is associated with faster attention and executive function abilities in healthy samples and highlight the importance of examining reaction time and accuracy indices separately on these measures. The lack of association among obese individuals may be due in part to inaccurate self-report in the current study. Additionally, the cognitive consequences of obesity may outweigh the benefits of physical activity in this group. Future work should investigate these associations in obese individuals using physical activity interventions, as well as a combination of self-report and objective measures to investigate discrepancies in reporting. © 2014 The Authors. Clinical Obesity © 2014 World Obesity.

Networks of Zeeman catastrophe machines for the investigation of complex systems

International Nuclear Information System (INIS)

Nagy, Péter; Tasnádi, Péter

2014-01-01

The investigation of chaotic motion and cooperative systems presents a great opportunity to involve modern physics into the basic course of mechanics taught to BSc-level students. In our previous paper (2014 Eur. J. Phys. 35 015018), it was demonstrated that a Zeeman machine can be a versatile and motivating tool for students to gain introductory knowledge about chaotic motion via interactive simulations. Although the Zeeman machine is known mainly for its quasi-static and catastrophic behaviour, its dynamic properties are also very interesting and show typical chaotic features. In this paper, we present a novel construction consisting of Zeeman machines linked into a network. Although Zeeman networks can be built with almost arbitrary topology, our discussion is restricted to a system where Zeeman machines are arranged in a two-dimensional periodical lattice and the angular variables of the machines are limited to discrete values only. It will be shown that the Zeeman-crystal is appropriate for studying the properties of a broad range of complex systems. Using NetLogo simulations (second- and first-order) phase transitions, its ferromagnetic- and anti-ferromagnetic-type behaviour is demonstrated. A limiting case of the theoretical model of Zeeman-crystal leads to a model that is analogous to the Potts clock model used frequently in statistical physics. The present paper is organically linked to our website (http://csodafizika.hu/zeeman) where downloadable simulations, which are discussed in the paper, can be found. (paper)

First Lean, then modularisation

DEFF Research Database (Denmark)

Petersen, Kristian R.; Madsen, Erik Skov; Bilberg, Arne

2016-01-01

of Europe’s leading offshore wind power operators with more than 1,000 wind turbine generators in operation. By focusing on this company, in-depth insights into its operations and maintenance processes are investigated. Findings – Lean is identified to constitute an important first step before...... and resources can take place. The authors also establish a foundation for the development of a software tool to support the development of the modularisation of maintenance tasks. Originality/value – The present study contributes to the rather immature field of research on the operations and maintenance...

The maintenance management for lean organization

OpenAIRE

Daniel D. GEORGESCU

2010-01-01

The goal of lean maintenance approach is to maintain organization international competitiveness. In the spirit of continuously improvement, in the paper it is shown how by adjusting some Lean manufacturing specific techniques for Total Productive Maintenance (TPM) system, was born new maintenance system named Lean TPM. This is a systemic approach with three techniques, which don’t exclude specific techniques of TPM pillars, but complete them: the 7Ss as a critical first step in any improvemen...

Apply Lean Thinking in Project Management

OpenAIRE

Pham Ngoc, Lan

2015-01-01

The purpose of this thesis was to study the effects of Lean Thinking in Project Management and how applying Lean Project Management could enhance the productivity of project work. The study was carried using theoretical research and collecting empirical data from three interviews and one case study at a local company. At the end of the study, the major project management problems at the company were identified and analyzed following Lean Principles. It was also pointed out where there...

Adaptive Training and Collective Decision Support Based on Man-Machine Interface

Science.gov (United States)

2016-03-02

Based on Man -machine Interface The views, opinions and/or findings contained in this report are those of the author(s) and should not contrued as an...ADDRESS (ES) U.S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-2211 adaptive training, EEG, man -machine interface...non peer-reviewed journals: Final Report: Adaptive Training and Collective Decision Support Based on Man -machine Interface Report Title The existence of

Hepatic oxidative stress, genotoxicity and vascular dysfunction in lean or obese zucker rats

DEFF Research Database (Denmark)

Løhr, Mille; Folkmann, Janne Kjærsgaard; Sheykhzade, Majid

2015-01-01

Metabolic syndrome is associated with increased risk of cardiovascular disease, which could be related to oxidative stress. Here, we investigated the associations between hepatic oxidative stress and vascular function in pressurized mesenteric arteries from lean and obese Zucker rats at 14, 24 an......-generated DNA damage despite substantial hepatic steatosis.......Metabolic syndrome is associated with increased risk of cardiovascular disease, which could be related to oxidative stress. Here, we investigated the associations between hepatic oxidative stress and vascular function in pressurized mesenteric arteries from lean and obese Zucker rats at 14, 24...... and 37 weeks of age. Obese Zucker rats had more hepatic fat accumulation than their lean counterparts. Nevertheless, the obese rats had unaltered age-related level of hepatic oxidatively damaged DNA in terms of formamidopyrimidine DNA glycosylase (FPG) or human oxoguanine DNA glycosylase (hOGG1...

Machine-based mapping of innovation portfolios

NARCIS (Netherlands)

de Visser, Matthias; Miao, Shengfa; Englebienne, Gwenn; Sools, Anna Maria; Visscher, Klaasjan

2017-01-01

Machine learning techniques show a great promise for improving innovation portfolio management. In this paper we experiment with different methods to classify innovation projects of a high-tech firm as either explorative or exploitative, and compare the results with a manual, theory-based mapping of

Restrictions of process machine retooling at machine-building enterprises

Directory of Open Access Journals (Sweden)

Kuznetsova Elena

2017-01-01

Full Text Available The competitiveness of the national economy depends on the technological level of the machine-building enterprises production equipment. Today in Russia there are objective and subjective restrictions for the optimum policy formation of the manufacturing equipment renewal. The analysis of the manufacturing equipment age structure dynamics in the Russian machine-building complex indicates the negative tendencies intensification: increase in the equipment service life, reduction in the share of up-to-date equipment, and drop in its use efficiency. The article investigates and classifies the main restrictions of the manufacturing equipment renewal process, such as regulatory and legislative, financial, organizational, competency-based. The economic consequences of the revealed restrictions influence on the machine-building enterprises activity are shown.

Clinically lean; "cutting the crap".

Science.gov (United States)

Caldwell, G

2012-01-01

Proponents of Lean Philosophy believe that successful businesses must reduce waste in working time and resources to a minimum, and maximise their use in productive work. The productive work of the Acute Medical Unit is to provide effective clinical management to a daily cohort of acutely ill patients. Many Clinicians are cynical about Lean. In this article, Dr Caldwell discusses how many clinicians complain of too much crap in the workplace, which gets in the way of swift, safe high quality clinical care. He argues that "Cutting the Crap" in the Acute Medical Unit is entirely consistent with Lean approaches to management of complex systems.

The relationships between Lean manufacturing, management accounting and firm performance

DEFF Research Database (Denmark)

Kristensen, Thomas Borup; Nielsen, Henrik; Grasso, Lawrency

2016-01-01

with management accounting practices. Specifically, we document that Lean manufacturing is positively associated with Value Stream Costing, Lean visual controls and, more importantly, measures of labor and materials efficiency. Lean manufacturing is positively related to Lean thinking and both are positively...... associated with operational performance and so are Lean visual controls. We also document that the management accounting practices intervene affecting operational performance and they intervene with Lean thinking as well. Lastly, the relationship between Lean manufacturing and measures of labor and materials......Lean manufacturing has been adopted by numerous western companies as an answer to an increasing competitive environment. Lean manufacturing is seen as an enterprise-wide strategy encompassing a transformation of manufacturing practices, affecting companies’ management accounting practices and...

The promise of Lean in health care.

Science.gov (United States)

Toussaint, John S; Berry, Leonard L

2013-01-01

An urgent need in American health care is improving quality and efficiency while controlling costs. One promising management approach implemented by some leading health care institutions is Lean, a quality improvement philosophy and set of principles originated by the Toyota Motor Company. Health care cases reveal that Lean is as applicable in complex knowledge work as it is in assembly-line manufacturing. When well executed, Lean transforms how an organization works and creates an insatiable quest for improvement. In this article, we define Lean and present 6 principles that constitute the essential dynamic of Lean management: attitude of continuous improvement, value creation, unity of purpose, respect for front-line workers, visual tracking, and flexible regimentation. Health care case studies illustrate each principle. The goal of this article is to provide a template for health care leaders to use in considering the implementation of the Lean management system or in assessing the current state of implementation in their organizations. Copyright © 2013 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

Lean sigma--will it work for healthcare?

Science.gov (United States)

Bahensky, James A; Roe, Janet; Bolton, Romy

2005-01-01

The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model

Science.gov (United States)

Jadhav, J. R.; Mantha, S. S.; Rane, S. B.

2015-06-01

The demands for automobiles increased drastically in last two and half decades in India. Many global automobile manufacturers and Tier-1 suppliers have already set up research, development and manufacturing facilities in India. The Indian automotive component industry started implementing Lean practices to fulfill the demand of these customers. United Nations Industrial Development Organization (UNIDO) has taken proactive approach in association with Automotive Component Manufacturers Association of India (ACMA) and the Government of India to assist Indian SMEs in various clusters since 1999 to make them globally competitive. The primary objectives of this research are to study the UNIDO-ACMA Model as well as ISM Model of Lean implementation and validate the ISM Model by comparing with UNIDO-ACMA Model. It also aims at presenting a roadmap for Lean implementation in Indian automotive component industry. This paper is based on secondary data which include the research articles, web articles, doctoral thesis, survey reports and books on automotive industry in the field of Lean, JIT and ISM. ISM Model for Lean practice bundles was developed by authors in consultation with Lean practitioners. The UNIDO-ACMA Model has six stages whereas ISM Model has eight phases for Lean implementation. The ISM-based Lean implementation model is validated through high degree of similarity with UNIDO-ACMA Model. The major contribution of this paper is the proposed ISM Model for sustainable Lean implementation. The ISM-based Lean implementation framework presents greater insight of implementation process at more microlevel as compared to UNIDO-ACMA Model.

Multidisciplinary Investigations Regarding the Wear of Machine Tools Operating Into the Soil

Science.gov (United States)

Cardei, P.; Vladutoiu, L. C.; Gheorghe, G.; Fechete, T. L. V.; Chisiu, G.

2018-01-01

The paper presents the results obtained by the authors in investigating the problem of wear of work organs of machines working in continuous interaction with the soil. The phenomenon of the interaction of the tools of agricultural machinery for ploughing, and the soil, is a complex of phenomena, one of the most difficult to model. Among the phenomena involved in this interaction, friction and wear (of many types) are the most important. We did not take into account the chemical wear, and by the wear caused by weather conditions. Research has focused on formulating a theory that has more than a descriptive character, for it be used for application purposes. For this we used classical theoretical models, mathematical models based on the theory of continuous bodies, theory of flow of fluids around the profiles, as well as other theories, approached or not, in an attempt to solve as satisfactorily the issue of the wear, for the tools of the agricultural machines for the tillage. We also sought to highlight the fact that wear is a phenomenon on a micro and macro-scale scale, and its generating causes must ultimately be related to observable effects, on the macro-structural scale.

Automatic Test Pattern Generator for Fuzzing Based on Finite State Machine

Directory of Open Access Journals (Sweden)

Ming-Hung Wang

2017-01-01

Full Text Available With the rapid development of the Internet, several emerging technologies are adopted to construct fancy, interactive, and user-friendly websites. Among these technologies, HTML5 is a popular one and is widely used in establishing modern sites. However, the security issues in the new web technologies are also raised and are worthy of investigation. For vulnerability investigation, many previous studies used fuzzing and focused on generation-based approaches to produce test cases for fuzzing; however, these methods require a significant amount of knowledge and mental efforts to develop test patterns for generating test cases. To decrease the entry barrier of conducting fuzzing, in this study, we propose a test pattern generation algorithm based on the concept of finite state machines. We apply graph analysis techniques to extract paths from finite state machines and use these paths to construct test patterns automatically. According to the proposal, fuzzing can be completed through inputting a regular expression corresponding to the test target. To evaluate the performance of our proposal, we conduct an experiment in identifying vulnerabilities of the input attributes in HTML5. According to the results, our approach is not only efficient but also effective for identifying weak validators in HTML5.

An Experimental Investigation of Self-Excited Combustion Dynamics in a Single Element Lean Direct Injection (LDI) Combustor

Science.gov (United States)

Gejji, Rohan M.

The management of combustion dynamics in gas turbine combustors has become more challenging as strict NOx/CO emission standards have led to engine operation in a narrow, lean regime. While premixed or partially premixed combustor configurations such as the Lean Premixed Pre-vaporized (LPP), Rich Quench Lean burn (RQL), and Lean Direct Injection (LDI) have shown a potential for reduced NOx emissions, they promote a coupling between acoustics, hydrodynamics and combustion that can lead to combustion instabilities. These couplings can be quite complex, and their detailed understanding is a pre-requisite to any engine development program and for the development of predictive capability for combustion instabilities through high-fidelity models. The overarching goal of this project is to assess the capability of high-fidelity simulation to predict combustion dynamics in low-emissions gas turbine combustors. A prototypical lean-direct-inject combustor was designed in a modular configuration so that a suitable geometry could be found by test. The combustor comprised a variable length air plenum and combustion chamber, air swirler, and fuel nozzle located inside a subsonic venturi. The venturi cross section and the fuel nozzle were consistent with previous studies. Test pressure was 1 MPa and variables included geometry and acoustic resonance, inlet temperatures, equivalence ratio, and type of liquid fuel. High-frequency pressure measurements in a well-instrumented metal chamber yielded frequencies and mode shapes as a function of inlet air temperature, equivalence ratio, fuel nozzle placement, and combustor acoustic resonances. The parametric survey was a significant effort, with over 105 tests on eight geometric configurations. A good dataset was obtained that could be used for both operating-point-dependent quantitative comparisons, and testing the ability of the simulation to predict more global trends. Results showed a very strong dependence of instability amplitude on

Can lean save lives?

Science.gov (United States)

Fillingham, David

2007-01-01

The purpose of this paper is to show how over the last 18 months Bolton Hospitals NHS Trust have been exploring whether or not lean methodologies, often known as the Toyota Production System, can indeed be applied to healthcare. This paper is a viewpoint. One's early experience is that lean really can save lives. The Toyota Production System is an amazingly successful way of manufacturing cars. It cannot be simply translated unthinkingly into a hospital but lessons can be learned from it and the method can be adapted and developed so that it becomes owned by healthcare staff and focused towards the goal of improved patient care. Working in healthcare is a stressful and difficult thing. Everyone needs a touch of inspiration and encouragement. Applying lean to healthcare in Bolton seems to be achieving just that for those who work there.

Perancangan Model Pengukuran Kinerja Lean dan Green Rantai Pasok Semen Secara Terintegrasi

Directory of Open Access Journals (Sweden)

Dina Rahmayanti

2017-05-01

Full Text Available Abstract PT. Semen Padang is one of the reputable cement companies in Indonesia which is producing types of cement. Implementation of supply chain concept in PT. Semen Padang is very important to satisfy customers and stakeholders requirement. Performance measurement is a process to evaluate the supply chain effectiveness and efficiency in lean and green aspect. The problem is how to design performance measurement model which is integrating lean and green supply chain concepts. The objective of research is integrating lean and green supply chain concepts to design supply chain performance measurement of bag cement type. Integration of lean and green concept is designed by Balanced Scorecard (BSC perspectives that consist of financial, customer, internal process business and learning and growth. Key performance indicators (KPI are formulated and classified based on BSC perspectives. Next stage is pair wise comparison process to the weight value. Evaluation of KPI pair wise comparison based is conducted on expert opinion which is selected by consideration of their relevance knowledge and experience. The process of pair wise comparison is calculated to determine priority of the KPIs based on weight value by using Analytical Hierarchy Process (AHP method. The weight of KPI will be arrange by descending to determine the priority. Model of performance measurement is validated by face validity method. Research result is obtaining 25 KPIs that derived from integration of lean and green supply chain concept of bag cement type. Grouping is consisting of 3 KPIs of financial, 4 KPIs of customer, 11 KPI s of internal process business and 7 KPI s of learning & growth. Result is showing that customer is most prioritized element in supply chain of bag cement type. Implementation of proposing model is coordination of departments and employee in context of information accessibility. Keywords: Supply chain, lean, green, BSC, performance measurement

PERANCANGAN MODEL PENGUKURAN KINERJA LEAN DAN GREEN RANTAI PASOK SEMEN SECARA TERINTEGRASI

Directory of Open Access Journals (Sweden)

Dina Rahmayanti

2017-06-01

Full Text Available PT. Semen Padang is one of the reputable cement companies in Indonesia which is producing types of cement. Implementation of supply chain concept in PT. Semen Padang is very important to satisfy customers and stakeholders requirement. Performance measurement is a process to evaluate the supply chain effectiveness and efficiency in lean and green aspect. The problem is how to design performance measurement model which is integrating lean and green supply chain concepts. The objective of research is integrating lean and green supply chain concepts to design supply chain performance measurement of bag cement type. Integration of lean and green concept is designed by Balanced Scorecard (BSC perspectives that consist of financial, customer, internal process business and learning and growth. Key performance indicators (KPI are formulated and classified based on BSC perspectives. Next stage is pair wise comparison process to the weight value. Evaluation of KPI pair wise comparison based is conducted on expert opinion which is selected by consideration of their relevance knowledge and experience. The process of pair wise comparison is calculated to determine priority of the KPIs based on weight value by using Analytical Hierarchy Process (AHP method. The weight of KPI will be arrange by descending to determine the priority. Model of performance measurement is validated by face validity method. Research result is obtaining 25 KPIs that derived from integration of lean and green supply chain concept of bag cement type. Grouping is consisting of 3 KPIs of financial, 4 KPIs of customer, 11 KPI s of internal process business and 7 KPI s of learning & growth. Result is showing that customer is most prioritized element in supply chain of bag cement type. Implementation of proposing model is coordination of departments and employee in context of information accessibility.     Keywords: Supply chain, lean, green, BSC, performance measurement

Application of Lean Manufacturing in Hospitals-the Need to Consider Maturity, Complexity, and the Value Concept

DEFF Research Database (Denmark)

Hasle, Peter; Nielsen, Anders Paarup; Edwards, Kasper

2016-01-01

Lean is widely applied in hospitals, but the impact tends to be limited. This paper investigates three possible explanations: 1) maturity, 2) complexity, and 3) the value concept and analyses the bearing of these in a case study of lean application in a large Danish university hospital. The results...... indicate that lean tends to be applied in secondary and support functions with a logistic character and therefore has had a limited impact on the overall healthcare performance. The case study shows that there are constraints related to low lean maturity, the complexity of processes and operations as well...... in hospitals in order to bring about a larger impact. It is therefore necessary to develop new models for the lean concept as well as the implementation of lean adapted to the particular context of hospitals with a stronger focus on patient experiences and on coordination of social relations....

Critical Success Factors for Lean Thinking in the Application of Industrialised Building System (IBS)

Science.gov (United States)

Yunus, Riduan; Noor, Siti Rahimah Mohd; Halid Abdullah, Abd; Nagapan, Sasitharan; Hamid, Abdul Rahim Abdul; Tajudin, Saiful Azhar Ahmad; Rohani Mat Jusof, Siti

2017-08-01

Productivity in the manufacturing process of building components can be increased by optimising each advantage that is available in each activity. Identification of critical success factors (CSFs) for lean thinking in the Industrialised Building System (IBS) will be able to minimise cost and reduce time needed to complete a project. The focus of lean thinking in construction is on the production process and the client’s requirement. In developing countries such as Malaysia, the integration of lean thinking in IBS applications is still low and there is a shortage of comprehensive strategies to integrate lean thinking. As key stakeholders, feedback from contractors, manufacturers, developers and the local authority will be able to help the identification of CSFs in integrating lean thinking in IBS applications. The data was collected through a questionnaire survey and analysed quantitatively. There are 31 CSFs for lean thinking in IBS which have been identified in this study. A conceptual model was developed to assist researchers in investigating the influences of CSFs for lean thinking in IBS applications. This study will assist construction players to improvise their manufacturing process in the implementation of IBS to eliminate unnecessary activities and focus instead on significant processes without generating physical and non-physical waste.

Når lean organiserer på hospitalet

DEFF Research Database (Denmark)

Hauge, Amalie Martinus

Lean er kendt og anvendt af mange offentlige organisationer i Danmark. Selv om Leans anvendelighed de fleste steder er slået fast, bliver Lean imidlertid ved med at udfordre og skabe konflikt. Hvorfor det? Dette spørgsmål – og mange andre – bliver belyst i denne rapport, som er baseret på en Ph...

Lean Accounting - An Ingenious Solution for Cost Optimization

OpenAIRE

Dimi Ofileanu; Dan Ioan Topor

2014-01-01

The aim of this work is to present a new concept in accounting management: Lean Accounting. This work explains the way the lean concept was born; its benefits for the production system of the factories and the necessity of applying lean accounting in the factories which have implemented lean production, taking into account both its advantages and the boundaries of the other cost management methods in those factories.

Game-powered machine learning.

Science.gov (United States)

Barrington, Luke; Turnbull, Douglas; Lanckriet, Gert

2012-04-24

Searching for relevant content in a massive amount of multimedia information is facilitated by accurately annotating each image, video, or song with a large number of relevant semantic keywords, or tags. We introduce game-powered machine learning, an integrated approach to annotating multimedia content that combines the effectiveness of human computation, through online games, with the scalability of machine learning. We investigate this framework for labeling music. First, a socially-oriented music annotation game called Herd It collects reliable music annotations based on the "wisdom of the crowds." Second, these annotated examples are used to train a supervised machine learning system. Third, the machine learning system actively directs the annotation games to collect new data that will most benefit future model iterations. Once trained, the system can automatically annotate a corpus of music much larger than what could be labeled using human computation alone. Automatically annotated songs can be retrieved based on their semantic relevance to text-based queries (e.g., "funky jazz with saxophone," "spooky electronica," etc.). Based on the results presented in this paper, we find that actively coupling annotation games with machine learning provides a reliable and scalable approach to making searchable massive amounts of multimedia data.

Comparative study of lean practices between Japanese and Malaysia automotive service centres

Science.gov (United States)

Ahmad, Md Fauzi; Ting, Neo Yeong; Nor, Nik Hisyamudin Muhd; Wei, Chan Shiau; Hassan, Mohd Fahrul; Hamid, Nor Aziati Abdul

2017-10-01

Nowadays, lean practices are implemented in many manufacturing and services companies. Lean practices are implemented in order to minimize wastes while maximise the overall performances in an organisation. In service sector, lean practices are importance to ensure value added services can be delivered to customers. However, Malaysia automotive companies cannot compete with Japanese automotive companies in terms of their customer satisfaction. The purpose of this study is to compare the lean practice between Japanese and Malaysia automotive service centres. A total of 80 questionnaires out of 100 distributed questionnaires were responded and this represented as 80% of response rate. The Mann-Whitney test result shows that there were four out of five factors of lean practices have significant differences between Japanese and Malaysia automotive service centres, which are TPM, JIT, Kanban, and 5S. VSM has not significant difference between ownerships. In addition, TPM, JIT, Kanban, VSM and 5S were higher practices in Japanese companies against Malaysia companies. Many Malaysia companies are still in the journey of lean practices and they need recommendation guidance to compete with other long-term established companies. Based on the survey result, the significant differences are identified as weak points of Malaysia companies as an opportunity to improve. Moreover, the significance of this study can help researchers and industry players to improve lean practices in automotive service industry.

Man-machine interfaces analysis system based on computer simulation

International Nuclear Information System (INIS)

Chen Xiaoming; Gao Zuying; Zhou Zhiwei; Zhao Bingquan

2004-01-01

The paper depicts a software assessment system, Dynamic Interaction Analysis Support (DIAS), based on computer simulation technology for man-machine interfaces (MMI) of a control room. It employs a computer to simulate the operation procedures of operations on man-machine interfaces in a control room, provides quantified assessment, and at the same time carries out analysis on operational error rate of operators by means of techniques for human error rate prediction. The problems of placing man-machine interfaces in a control room and of arranging instruments can be detected from simulation results. DIAS system can provide good technical supports to the design and improvement of man-machine interfaces of the main control room of a nuclear power plant

The impact of lean manufacturing as a factor for improving productive performance

Directory of Open Access Journals (Sweden)

Leoni Pentiado Godoy

2018-06-01

Full Text Available The main objective of this article is to present the impact that the Lean manufacturing tool can have in a company that does not have management methodology for the Toyota Production System. This work was carried out in an industry that outsources services for the export of the medium-sized leather footwear producers sector located in the industrial pole of RS, Brazil. In the data collection, questions were raised with the managers and collaborators, as well as the researcher’s empirical view on the decisions that were being taken in the productive processes for a period of four months. These data were analyzed using Excel spreadsheets. In the results , the importance of the application of the Lean Manufacturing tools was highlighted , and some suggestions were given to the managers, mainly in relation to the idle capacity of production in several sectors, representing how much more the company could be producing to reach its maximum capacity. The mapping applied identified the adaptation of new machines for better production results, as well as intensifying the mapping of the critical paths that aggregate and do not add value in the productive operating environment.

Prototype-based models in machine learning

NARCIS (Netherlands)

Biehl, Michael; Hammer, Barbara; Villmann, Thomas

2016-01-01

An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of

Lean manufacturing como herramienta de competitividad en las PYMEs españolas

OpenAIRE

AÑAGUARI YARASCA, MILUSKA AYLIN; Gisbert Soler, Víctor

2016-01-01

[EN] This article, based on previous studies and multiple written literature, aims to raise awareness of the importance of the implementation of lean manufacturing tools in the Spanish industrial SMEs, showing which are the critical factors that directly affect the performance competitive SMEs today. As well as raise awareness of Lean Manufacturing, strategies for implementation and the benefits this brings to the company. [ES] El presente artículo, en base a estudios previos y a la múltip...

Translating 10 lessons from lean six sigma project in paper-based training site to electronic health record-based primary care practice: challenges and opportunities.

Science.gov (United States)

Aleem, Sohaib

2013-01-01

Lean Six Sigma is a well-proven methodology to enhance the performance of any business, including health care. The strategy focuses on cutting out waste and variation from the processes to improve the value and efficiency of work. This article walks through the journey of "green belt" training using a Lean Six Sigma approach and the implementation of a process improvement project that focused on wait time for patients to be examined in an urban academic primary care clinic without requiring added resources. Experiences of the training and the project at an urban paper-based satellite clinic have informed the planning efforts of a data and performance team, including implementing a 15-minute nurse "pre-visit" at primary care sites of an accountable care organization.

Lean management in academic surgery.

Science.gov (United States)

Collar, Ryan M; Shuman, Andrew G; Feiner, Sandra; McGonegal, Amy K; Heidel, Natalie; Duck, Mary; McLean, Scott A; Billi, John E; Healy, David W; Bradford, Carol R

2012-06-01

Lean is a management system designed to enhance productivity by eliminating waste. Surgical practice offers many opportunities for improving efficiency. Our objective was to determine whether systematic implementation of lean thinking in an academic otolaryngology operating room improves efficiency and profitability and preserves team morale and educational opportunities. In an 18-month prospective quasi-experimental study, a multidisciplinary task force systematically implemented lean thinking within an otolaryngology operating room of an academic health system. Operating room turnover time and turnaround time were measured during a baseline period; an observer-effect period in which workers were made aware that their efficiency was being measured but before implementing lean changes; and an intervention period after redesign principles had been used. The impact on teamwork, morale, and surgical resident education were measured during the baseline and intervention periods through validated surveys. A profit model was applied to estimate the financial implications of the study. There was no difference between the baseline and observer-effect periods of the study for turnover time (p = 0.98) or turnaround time (p = 0.20). During the intervention period, the mean turnover time and turnaround time were significantly shorter than during the baseline period (29 vs 38 minutes; p improved morale after implementation (p = 0.011). Educational metrics were unchanged before and after implementation. The annual opportunity revenue for the involved operating room is $330,000; when extrapolated throughout the operating rooms, lean thinking could create 6,500 hours of capacity annually. Application of lean management techniques to a single operating room and surgical service improved operating room efficiency and morale, sustained resident education, and can provide considerable financial gains when scaled to an entire academic surgical suite. Copyright © 2012. Published by

Determinants of Lean Success and Failure in the Danish Public Sector

DEFF Research Database (Denmark)

Rahbek Pedersen, Esben; Muniche, Mahad

2011-01-01

with 29 managers and employees from Danish public sector organisations who have been involved in the planning and implementation of lean projects over the past few years. Findings – The paper identifies a number of factors within the structural context and the negotiation context which are deemed......Purpose – The purpose of this paper is to examine the determinants of lean implementation in Danish public sector organisations. It is proposed to structure the paper around a theoretical model based on a negotiated order perspective. Design/methodology/approach – The paper is based on interviews...

Towards Measuring the Abstractness of State Machines based on Mutation Testing

Directory of Open Access Journals (Sweden)

Thomas Baar

2017-01-01

Full Text Available Abstract. The notation of state machines is widely adopted as a formalism to describe the behaviour of systems. Usually, multiple state machine models can be developed for the very same software system. Some of these models might turn out to be equivalent, but, in many cases, different state machines describing the same system also differ in their level of abstraction. In this paper, we present an approach to actually measure the abstractness level of state machines w.r.t. a given implemented software system. A state machine is considered to be less abstract when it is conceptionally closer to the implemented system. In our approach, this distance between state machine and implementation is measured by applying coverage criteria known from software mutation testing. Abstractness of state machines can be considered as a new metric. As for other metrics as well, a known value for the abstractness of a given state machine allows to assess its quality in terms of a simple number. In model-based software development projects, the abstract metric can help to prevent model degradation since it can actually measure the semantic distance from the behavioural specification of a system in form of a state machine to the current implementation of the system. In contrast to other metrics for state machines, the abstractness cannot be statically computed based on the state machine’s structure, but requires to execute both state machine and corresponding system implementation. The article is published in the author’s wording. 

Quantum neural network based machine translator for Hindi to English.

Science.gov (United States)

Narayan, Ravi; Singh, V P; Chakraverty, S

2014-01-01

This paper presents the machine learning based machine translation system for Hindi to English, which learns the semantically correct corpus. The quantum neural based pattern recognizer is used to recognize and learn the pattern of corpus, using the information of part of speech of individual word in the corpus, like a human. The system performs the machine translation using its knowledge gained during the learning by inputting the pair of sentences of Devnagri-Hindi and English. To analyze the effectiveness of the proposed approach, 2600 sentences have been evaluated during simulation and evaluation. The accuracy achieved on BLEU score is 0.7502, on NIST score is 6.5773, on ROUGE-L score is 0.9233, and on METEOR score is 0.5456, which is significantly higher in comparison with Google Translation and Bing Translation for Hindi to English Machine Translation.

An efficient flow-based botnet detection using supervised machine learning

DEFF Research Database (Denmark)

Stevanovic, Matija; Pedersen, Jens Myrup

2014-01-01

Botnet detection represents one of the most crucial prerequisites of successful botnet neutralization. This paper explores how accurate and timely detection can be achieved by using supervised machine learning as the tool of inferring about malicious botnet traffic. In order to do so, the paper...... introduces a novel flow-based detection system that relies on supervised machine learning for identifying botnet network traffic. For use in the system we consider eight highly regarded machine learning algorithms, indicating the best performing one. Furthermore, the paper evaluates how much traffic needs...... to accurately and timely detect botnet traffic using purely flow-based traffic analysis and supervised machine learning. Additionally, the results show that in order to achieve accurate detection traffic flows need to be monitored for only a limited time period and number of packets per flow. This indicates...

Results of Investigative Tests of Gas Turbine Engine Compressor Blades Obtained by Electrochemical Machining

Science.gov (United States)

Kozhina, T. D.; Kurochkin, A. V.

2016-04-01

The paper highlights results of the investigative tests of GTE compressor Ti-alloy blades obtained by the method of electrochemical machining with oscillating tool-electrodes, carried out in order to define the optimal parameters of the ECM process providing attainment of specified blade quality parameters given in the design documentation, while providing maximal performance. The new technological methods suggested based on the results of the tests; in particular application of vibrating tool-electrodes and employment of locating elements made of high-strength materials, significantly extend the capabilities of this method.

Using Lean Process Improvement to Enhance Safety and Value in Orthopaedic Surgery: The Case of Spine Surgery.

Science.gov (United States)

Sethi, Rajiv; Yanamadala, Vijay; Burton, Douglas C; Bess, Robert Shay

2017-11-01

Lean methodology was developed in the manufacturing industry to increase output and decrease costs. These labor organization methods have become the mainstay of major manufacturing companies worldwide. Lean methods involve continuous process improvement through the systematic elimination of waste, prevention of mistakes, and empowerment of workers to make changes. Because of the profit and productivity gains made in the manufacturing arena using lean methods, several healthcare organizations have adopted lean methodologies for patient care. Lean methods have now been implemented in many areas of health care. In orthopaedic surgery, lean methods have been applied to reduce complication rates and create a culture of continuous improvement. A step-by-step guide based on our experience can help surgeons use lean methods in practice. Surgeons and hospital centers well versed in lean methodology will be poised to reduce complications, improve patient outcomes, and optimize cost/benefit ratios for patient care.

Indførelse af Lean principper

DEFF Research Database (Denmark)

Balmer, Christian; Michelsen, Aage U

2004-01-01

I artiklen beskrives, hvorledes lean-principper er indført i en forsikringsvirksomhed samt de opnåede resultater.......I artiklen beskrives, hvorledes lean-principper er indført i en forsikringsvirksomhed samt de opnåede resultater....

LEAN PRACTICES FOR PRODUCT DEVELOPMENT PROCESS

Directory of Open Access Journals (Sweden)

Guilherme Luz Tortorella

2015-06-01

Full Text Available Lean product development (LPD is an approach that comprises lean principles and management practices that aim to reduce waste and improve operational effectiveness throughout the entire value stream in continuous improvement endless journey. Due to that, the ability to innovate, change and learn continuously is a key element in order to minimize product development problems. Several LPD techniques are presented in the literature as possible enablers for lean implementation. However, little has been known about the impact of these enablers on the problems related to product development processes. Thus, this paper aims to examine the relationship between five LPD practices’ constructs and the occurrence frequency of eleven LPD problems’ constructs in companies that are implementing lean. Moreover, the identification of relevant relationships between LPD practices’ and problems’ constructs may contribute to specify the contexts in which problems are expected to occur. The study sample comprises sixty four companies already undergoing lean implementation both in shop floor and offices area. The results indicate that the same practices’ constructs, which are deemed as influential for minimizing LPD problems, present different relationship intensities among them.

Why Lean doesn't work for everyone.

Science.gov (United States)

Kaplan, Gary S; Patterson, Sarah H; Ching, Joan M; Blackmore, C Craig

2014-12-01

Popularisation of Lean in healthcare has led to emphasis on Lean quality improvement tools in isolation, with inconsistent results. We argue that delivery of safer, more efficient, and higher quality-patient focused care requires organisational transformation of which the Lean toolkit is only one component. To successfully facilitate system transformation toward higher quality care at lower cost, Lean tools must be part of a comprehensive management system, within a supportive institutional culture, and with committed leadership. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Lean education an overview of current issues

CERN Document Server

Flumerfelt, Shannon; Kahlen, Franz-Josef

2017-01-01

This edited volume presents a structured approach to a new lean education curriculum, implemented for the education of engineers, managers, administrators as well as human resources developers. The authorship comprises professors and lecturers, trainers and practitioners who educate future professionals in Lean Thinking principles and tools. This edited book provides a platform for authors to share their efforts in building a Body of Knowledge (BoK) for Lean Education. The topical spectrum is state-of-the-art in this field, but the book also includes a glimpse into future developments. This is a highly informative and carefully presented book, providing valuable insight for scholars with an interest in Lean Education.

Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review

Directory of Open Access Journals (Sweden)

Kaya Eren

2017-12-01

Full Text Available Nickel based superalloys offer high strength, corrosion resistance, thermal stability and superb thermal fatigue properties. However, they have been one of the most difficult materials to machine due to these properties. Although we are witnessing improved machining strategies with the developing machining, tooling and inspection technologies, machining of nickel based superalloys is still a challenging task due to in-process strains and post process part quality demands.

[Improving a hospital's supply chain through lean management].

Science.gov (United States)

Aguilar-Escobar, V G; Garrido-Vega, P; Godino-Gallego, N

2013-01-01

Supply management is an area where hospitals have significant opportunities for improvement. The main objective of this paper has been to analyze how the application of Lean principles can improve logistics costs and user satisfaction. In connection with satisfaction, it also aimed to examine which aspects of the service define it and check for differences between different groups of users. The results of an experience to reorganize the hospital logistic system based on some Lean principles have been studied. This is therefore a case study, which combine different methods of data collection. The logistics cost calculation was carried out using the full costing method. To measure satisfaction of healthcare personnel, the internal logistics service users, an anonymous survey was conducted. Processing of the data obtained from the survey have included exploratory analysis, factor analysis and ANOVAs. The data have showed an improvement in logistics management after the implementation of Lean principles. Logistics costs were reduced and the satisfaction level of the internal users with the new logistics system was increased. Some differences in the degree of satisfaction by different groups of users were also detected, although they did not seem to distinguish between different aspects of logistic service. The analyzed experience shows the applicability and suitability of Lean principles to improve logistics operational costs and increase user satisfaction. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Lean rats gained more body weight than obese ones from a high-fibre diet.

Science.gov (United States)

Li, Shaoting; Zhang, Cheng; Gu, Yingyi; Chen, Long; Ou, Shiyi; Wang, Yong; Peng, Xichun

2015-10-28

There is controversy over previous findings that a high ratio of Firmicutes to Bacteriodetes helps obese animals harvest energy from the diet. To further investigate the relationship between microbial composition and energy harvest, microbial adaptation to diet and time should be considered. In this study, lean and obese rats were successfully induced with low-fat and high-fat diets. An 8-week high soyabean fibre (HSF)-containing diet was then fed to investigate the interaction between the diet and the rats' gut microbiota, as well as their influence on rats' growth. Rats' body weight (BW) was recorded weekly; their plasma lipids and their gut microbiota at week 11, 15 and 19 were analysed. After the consumption of the HSF diet, BW of lean rats increased significantly (Pcontent of plasma cholesterol was lowered and that of TAG was upgraded in both the groups when fed the HSF diet. There was no significant difference observed at each period between lean and obese rats. In the group of lean rats, the diversity of gut microbiota was elevated strongly (Pbacterial diversity and composition in obese rats were less altered after the HSF diet control. In conclusion, the increased Firmicutes and Bacteriodetes might relate to lean rats' higher BW gain; 'obese microbiota' could not help the hosts harvest more energy from the HSF diet.

Effect of machining fluid on the process performance of wire electrical discharge machining of nanocomposite ceramic

Directory of Open Access Journals (Sweden)

Zhang Chengmao

2015-01-01

Full Text Available Wire electric discharge machining (WEDM promise to be effective and economical techniques for the production of tools and parts from conducting ceramic blanks. However, the manufacturing of nanocomposite ceramics blanks with these processes is a long and costly process. This paper presents a new process of machining nanocomposite ceramics using WEDM. WEDM uses water based emulsion, polyvinyl alcohol and distilled water as the machining fluid. Machining fluid is a primary factor that affects the material removal rate and surface quality of WEDM. The effects of emulsion concentration, polyvinyl alcohol concentration and distilled water of the machining fluid on the process performance have been investigated.

Nano Mechanical Machining Using AFM Probe

Science.gov (United States)

Mostofa, Md. Golam

and burr formations through intermittent cutting. Combining the AFM probe based machining with vibration-assisted machining enhanced nano mechanical machining processes by improving the accuracy, productivity and surface finishes. In this study, several scratching tests are performed with a single crystal diamond AFM probe to investigate the cutting characteristics and model the ploughing cutting forces. Calibration of the probe for lateral force measurements, which is essential, is also extended through the force balance method. Furthermore, vibration-assisted machining system is developed and applied to fabricate different materials to overcome some of the limitations of the AFM probe based single point nano mechanical machining. The novelty of this study includes the application of vibration-assisted AFM probe based nano scale machining to fabricate micro/nano scale features, calibration of an AFM by considering different factors, and the investigation of the nano scale material removal process from a different perspective.

Leveraging lean in the office: Lean office needs a novel and differentiated approach

OpenAIRE

Rüttimann, Bruno G.; Fischer, Urs P.; Stöckli, Martin T.

2014-01-01

Lean Six Sigma tools have been increasingly employed also in the service industry, however with different success as field studies have shown. The reason not only has to be attributed to a poor Change Management, but can also be attributed to the intrinsic characteristics of the Lean techniques, which have been tailored to sustain a stable customer-takted pull-manufacturing principle. An office workplace shows significant differences to a procedural shop floor environment, as it comprises bot...

Reducing waste in administrative services with lean principles

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Beckers, David; Amrit, Chintan Amrit

2016-01-01

In the last few decades, lean techniques have been developed for removing with waste in manufacturing. More recently, lean is used outside the manufacturing context as well. This article focuses on using lean thinking for reducing waste in administrative services, i.e., business services with

Passivity-Based Control of Electric Machines

Energy Technology Data Exchange (ETDEWEB)

Nicklasson, P.J.

1996-12-31

This doctoral thesis presents new results on the design and analysis of controllers for a class of electric machines. Nonlinear controllers are derived from a Lagrangian model representation using passivity techniques, and previous results on induction motors are improved and extended to Blondel-Park transformable machines. The relation to conventional techniques is discussed, and it is shown that the formalism introduced in this work facilitates analysis of conventional methods, so that open questions concerning these methods may be resolved. In addition, the thesis contains the following improvements of previously published results on the control of induction motors: (1) Improvement of a passivity-based speed/position controller, (2) Extension of passivity-based (observer-less and observer-based) controllers from regulation to tracking of rotor flux norm, (3) An extension of the classical indirect FOC (Field-Oriented Control) scheme to also include global rotor flux norm tracking, instead of only torque tracking and rotor flux norm regulation. The design is illustrated experimentally by applying the proposed control schemes to a squirrel-cage induction motor. The results show that the proposed methods have advantages over previous designs with respect to controller tuning, performance and robustness. 145 refs., 21 figs.

Modelling green and lean supply chains

DEFF Research Database (Denmark)

Govindan, Kannan; Carvalho, Helena; Azevedo, Susana G.

2017-01-01

This manuscript proposes a model to support decision making and to help managers identify the best set of green and lean supply chain management practices to improve their eco-efficiency. To attain this objective, a mathematical model based on eco-efficiency concepts is suggested to overcome...... a strategic framework to support the design of eco-efficient supply chains....

Three-Dimensional Composite Nanostructures for Lean NOx Emission Control

Energy Technology Data Exchange (ETDEWEB)

Gao, Pu-Xian

2013-07-31

This final report to the Department of Energy (DOE) and National Energy Technology Laboratory (NETL) for DE-EE0000210 covers the period from October 1, 2009 to July 31, 2013. Under this project, DOE awarded UConn about $1,248,242 to conduct the research and development on a new class of 3D composite nanostructure based catalysts for lean NOx emission control. Much of the material presented here has already been submitted to DOE/NETL in quarterly technical reports. In this project, through a scalable solution process, we have successfully fabricated a new class of catalytic reactors, i.e., the composite nanostructure array (nano-array) based catalytic converters. These nanocatalysts, distinct from traditional powder washcoat based catalytic converters, directly integrate monolithic substrates together with nanostructures with well-defined size and shape during the scalable hydrothermal process. The new monolithic nanocatalysts are demonstrated to be able to save raw materials including Pt-group metals and support metal oxides by an order of magnitude, while perform well at various oxidation (e.g., CO oxidation and NO oxidation) and reduction reactions (H{sub 2} reduction of NOx) involved in the lean NOx emissions. The size, shape and arrangement of the composite nanostructures within the monolithic substrates are found to be the key in enabling the drastically reduced materials usage while maintaining the good catalytic reactivity in the enabled devices. The further understanding of the reaction kinetics associated with the unique mass transport and surface chemistry behind is needed for further optimizing the design and fabrication of good nanostructure array based catalytic converters. On the other hand, the high temperature stability, hydrothermal aging stability, as well as S-poisoning resistance have been investigated in this project on the nanocatalysts, which revealed promising results toward good chemical and mechanical robustness, as well as S

"The Toyota Way". LEAN, more than a kit of tools and techniques

OpenAIRE

SERGIO JULIÁN GARCÍA; ASIER TOLEDANO DE DIEGO; NAGORE MAÑES SIERRA

2009-01-01

When speaking about LEAN, people immediately think about Toyota and its continuous success. Accordingly, many companies have tried to follow its model: the TPS (Toyota Production System) or the LEAN model, based on it. However, few ones have achieved it. We think the book «The Toyota way» gives the answer through fourteen principles that we are commenting in this article.

Lean accounting – as a future accounting system

Directory of Open Access Journals (Sweden)

M.V. Koryagin

2017-12-01

Full Text Available The historical development of lean accounting is researched. The comparison of lean accounting and accounting is carried out. The article determines the lean accounting basic principles, which are the basis for the selection of main ten steps of upgrading to the system of lean accounting: the evaluation of the current situation and the expected development prospects of the enterprise; the development of the principles of implementing lean accounting; the determining the production parameters and methodology of the economic model construction; the organization of lean manufacturing environment and reducing most of the stock; the determining the flow of value creation; the rejection of variable accounting and reverse cancellation of all labor costs and the cost of materials; the rejection of tracking stocks and assign of the costs directly to the costs of sales when occurred; the definition of client-targeted spending; the relationship with suppliers and automation of the accounts payable; the relationship with customers and automation of the payments received.

Readiness for change and job satisfaction in a case of lean management application - a comparative study.

Science.gov (United States)

Lipińska-Grobelny, Agnieszka; Papieska, Ewelina

2012-09-01

This current study investigates the effect of lean management system on work attitudes of workers of two manufacturing companies. "Lean management" is a concept of work processes and human relations that determines company's productivity and profitability. Workers of two enterprises, the first one with lean production and the second one with old mass production, were compared for their readiness for change and job satisfaction (both emotional and cognitive aspect). The sample of 102 employees completed a battery of instruments such as: the Job Description Inventory by Neuberger and Allerbeck, the Job Affect Scale by Burke et al. and the Change-Readiness Scale by Kriegel and Brandt. Individuals from the lean manufacturing company were characterized by higher level of readiness for change, positive affect at work, and cognitive job satisfaction. In this approach the introduction of lean production positively affected company's human resource attitudes.

LEAN Tools in the IT Sector

Directory of Open Access Journals (Sweden)

Zoltan VAJNA

2015-05-01

Full Text Available Nowadays the LEAN tools with their proven efficiency are indispensable parts of the production management. I think there is no producing enterprise that cannot utilize a wide variety of these LEAN tools. The question now is how these tools can support companies in increasing the efficiency of their supporting IT processes. In this study I will demonstrate how these well-known LEAN tools from production management can be used in IT management to create more cost-effective, efficient and transparent solutions during the IT system development and IT operation activities. I will show respectively without attempting to be comprehensive the most important tools of the LEAN management and I will analyse how these tools can be used in the IT sector. At the end of this study I will demonstrate what the IT managers think about the practical use of these tools.

Machine vision based quality inspection of flat glass products

Science.gov (United States)

Zauner, G.; Schagerl, M.

2014-03-01

This application paper presents a machine vision solution for the quality inspection of flat glass products. A contact image sensor (CIS) is used to generate digital images of the glass surfaces. The presented machine vision based quality inspection at the end of the production line aims to classify five different glass defect types. The defect images are usually characterized by very little `image structure', i.e. homogeneous regions without distinct image texture. Additionally, these defect images usually consist of only a few pixels. At the same time the appearance of certain defect classes can be very diverse (e.g. water drops). We used simple state-of-the-art image features like histogram-based features (std. deviation, curtosis, skewness), geometric features (form factor/elongation, eccentricity, Hu-moments) and texture features (grey level run length matrix, co-occurrence matrix) to extract defect information. The main contribution of this work now lies in the systematic evaluation of various machine learning algorithms to identify appropriate classification approaches for this specific class of images. In this way, the following machine learning algorithms were compared: decision tree (J48), random forest, JRip rules, naive Bayes, Support Vector Machine (multi class), neural network (multilayer perceptron) and k-Nearest Neighbour. We used a representative image database of 2300 defect images and applied cross validation for evaluation purposes.

Lean in service industries: A literature review

Science.gov (United States)

V, Vignesh; Suresh, M.; Aramvalarthan, S.

2016-09-01

Lean service is an amalgamation of tools and practices which, if applied appropriately, would definitely improve the existing quality of operations and ensure the generation of a large amount of favourable financial and economic outcomes and improve the behaviour of the workforce. As a result, it assumes of great significance in the fiercely competitive modern world. This article presents a comprehensive bibliographic study about the various lean service practices through a variety of approaches like service improvement, manufacturing, supply chain, market and retailing approaches, etc. Thus it gives a clear view on how the lean services are implemented in various sectors and the contribution of lean service towards improving the quality in the services provided while reducing the costs.

Getting 'Lean': hardwiring process excellence into Northeast Health.

Science.gov (United States)

Brown, Tricia; Duthe, Robert

2009-01-01

Many healthcare organizations are turning to the "Lean" Toyota Production System as a means to hardwire process excellence into their organizations. Northeast Health, an integrated delivery system in New York's capital region, introduced the Lean concept into its culture in 2004. After four years, the organization is beginning to see its staff hardwire Lean thinking into day-to-day behaviors. This paper focuses on the approach used by Northeast Health to introduce Lean concepts into its culture, challenges faced, lessons learned and the factors critical to success.

Prioritizing lean supply chain management initiatives in healthcare service operations: A fuzzy-AHP approach

OpenAIRE

Adebanjo, Dotun; Laosirihongthong, Tritos; Samaranayake, Premaratne

2016-01-01

The objective of this study is to investigate the perceptions of practitioners/experts about the prioritisation of healthcare performance measures and their relationship with lean supply chain management (LSCM) practices. The study will also prioritise the drivers and resources required to implement LSCM in a healthcare operations context. The prioritisation is based on the relative weights of various initiatives on a range of performance measures. Twenty-four LSCM initiatives were identified...

Physical Activity Modifies the Association between Dietary Protein and Lean Mass of Postmenopausal Women.

Science.gov (United States)

Martinez, Jessica A; Wertheim, Betsy C; Thomson, Cynthia A; Bea, Jennifer W; Wallace, Robert; Allison, Matthew; Snetselaar, Linda; Chen, Zhao; Nassir, Rami; Thompson, Patricia A

2017-02-01

Maintenance of lean muscle mass and related strength is associated with lower risk for numerous chronic diseases of aging in women. Our aim was to evaluate whether the association between dietary protein and lean mass differs by physical activity level, amino acid composition, and body mass index categories. We performed a cross-sectional analysis of a prospective cohort. Participants were postmenopausal women from the Women's Health Initiative with body composition measurements by dual-energy x-ray absorptiometry (n=8,298). Our study measured percent lean mass, percent fat mass, and lean body mass index. Linear regression models adjusted for scanner serial number, age, calibrated energy intake, race/ethnicity, neighborhood socioeconomic status, and recreational physical activity were used to determine the relationship between protein intake and body composition measures. Likelihood ratio tests and stratified analysis were used to investigate physical activity and body mass index as potential effect modifiers. Biomarker-calibrated protein intake was positively associated with percent lean mass; women in the highest protein quintile had 6.3 percentage points higher lean mass than the lowest quintile (Plean body mass index were both inversely related to protein intake (both Plean body mass index (P interaction =0.011). Leucine intake was associated with lean mass, as were branched chain amino acids combined (both Plean mass in postmenopausal women. Importantly, those that also engage in physical activity have the highest lean mass across body mass index categories. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

De praktijk van Lean Six Sigma

NARCIS (Netherlands)

Does, R.J.M.M.; de Koning, H.

2008-01-01

Zowel Lean als Six Sigma zijn benaderingen van kwaliteits- en efficiëntieverbetering die op dit moment sterk in de belangstelling staan van zowel de industrie als de dienstverlening. Lean Six Sigma integreert beide benaderingen. Ze wordt door sommigen gezien als panacee voor alle mogelijke

Just-in-Time og Lean Manufacturing

DEFF Research Database (Denmark)

Michelsen, Aage U.

2004-01-01

Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping.......Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping....

Lean Six Sigma in a hospital

NARCIS (Netherlands)

van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.

2006-01-01

Abstract Hospitals today face major challenges. Patients demand quality of care to be improved continuously. Health insurance companies demand the lowest possible prices. Lean Six Sigma is a program that can help healthcare providers to achieve these (seemingly) conflicting goals. Lean Six Sigma is

Lean thinking across a hospital: redesigning care at the Flinders Medical Centre.

Science.gov (United States)

Ben-Tovim, David I; Bassham, Jane E; Bolch, Denise; Martin, Margaret A; Dougherty, Melissa; Szwarcbord, Michael

2007-02-01

Lean thinking is a method for organising complex production processes so as to encourage flow and reduce waste. While the principles of lean thinking were developed in the manufacturing sector, there is increasing interest in its application in health care. This case history documents the introduction and development of Redesigning Care, a lean thinking-based program to redesign care processes across a teaching general hospital. Redesigning Care has produced substantial benefits over the first two-and-a-half years of its implementation, making care both safer and more accessible. Redesigning Care has not been aimed at changing the specifics of clinical practice. Rather, it has been concerned with improving the flow of patients through clinical and other systems. Concepts that emerged in the manufacturing sector have been readily translatable into health care. Lean thinking may play an important role in the reform of health care in Australia and elsewhere.

Analytical Model-Based Design Optimization of a Transverse Flux Machine

Energy Technology Data Exchange (ETDEWEB)

Hasan, Iftekhar; Husain, Tausif; Sozer, Yilmaz; Husain, Iqbal; Muljadi, Eduard

2017-02-16

This paper proposes an analytical machine design tool using magnetic equivalent circuit (MEC)-based particle swarm optimization (PSO) for a double-sided, flux-concentrating transverse flux machine (TFM). The magnetic equivalent circuit method is applied to analytically establish the relationship between the design objective and the input variables of prospective TFM designs. This is computationally less intensive and more time efficient than finite element solvers. A PSO algorithm is then used to design a machine with the highest torque density within the specified power range along with some geometric design constraints. The stator pole length, magnet length, and rotor thickness are the variables that define the optimization search space. Finite element analysis (FEA) was carried out to verify the performance of the MEC-PSO optimized machine. The proposed analytical design tool helps save computation time by at least 50% when compared to commercial FEA-based optimization programs, with results found to be in agreement with less than 5% error.

Reduce NOx Emissions by Adsorber-Reduction Catalyst on Lean Burn Gasoline Engine

Directory of Open Access Journals (Sweden)

Dongpeng Yue

2013-09-01

Full Text Available The effect of a new catalyst system composed of traditional three way catalyst converter and adsorber-reduction catalysis converter on the emission characteristics and BSFC (Breake Specific Fuel Consumption- BSFCof a lean burn gasoline engine operated were investigated in this paper under different schemes of catalyst converter arrangement and different speeds and loads. The results show that the position of Three Way Catalyst is before the NOx adsorber Catalyst was the best scheme of catalyst converter arrangement. Which has the highest converter efficiency of reduction NOx emission in lean burn gasoline engine. The effects of speed on the exhaust emission and BSFC were also related to the ratio of lean burn time to rich burn time and the absolute value of both time of the adsorber-reduction catalyst converter. The load of the engine was the main influential factor to the exhaust emission characteristics and BSFC of lean burn gasoline engine, and the more load of the engine was, the more NOx emission , the less NOx conversion rate (CNOx and the better BSFC were.

Machine learning for network-based malware detection

DEFF Research Database (Denmark)

Stevanovic, Matija

and based on different, mutually complementary, principles of traffic analysis. The proposed approaches rely on machine learning algorithms (MLAs) for automated and resource-efficient identification of the patterns of malicious network traffic. We evaluated the proposed methods through extensive evaluations...

Application of lean thinking to health care: issues and observations

Science.gov (United States)

Joosten, Tom; Bongers, Inge; Janssen, Richard

2009-01-01

Background Incidents and quality problems are a prime cause why health care leaders are calling to redesign health care delivery. One of the concepts used is lean thinking. Yet, lean often leads to resistance. Also, there is a lack of high quality evidence supporting lean premises. In this paper, we present an overview of lean thinking and its application to health care. Development, theory and application of lean thinking to health care Lean thinking evolved from a tool designed to improve operational shop-floor performance at an automotive manufacturer to a management approach with both operational and sociotechnical aspects. Sociotechnical dynamics have until recently not received much attention. At the same time a balanced approach might lead to a situation where operational and sociotechnial improvements are mutually reinforcing. Application to health care has been limited and focussed mainly on operational aspects using original lean tools. A more integrative approach would be to pay more attention to sociotechnical dynamics of lean implementation efforts. Also, the need to use the original lean tools may be limited, because health care may have different instruments and tools already in use that are in line with lean thinking principles. Discussion We believe lean thinking has the potential to improve health care delivery. At the same time, there are methodological and practical considerations that need to be taken into account. Otherwise, lean implementation will be superficial and fail, adding to existing resistance and making it more difficult to improve health care in the long term. PMID:19696048

Association of an APOC3 promoter variant with type 2 diabetes risk and need for insulin treatment in lean persons

NARCIS (Netherlands)

M. van Hoek (Mandy); T.W. van Herpt (Thijs); A. Dehghan (Abbas); A. Hofman (Albert); A. Lieverse (Aloysius); C.M. van Duijn (Cornelia); J.C.M. Witteman (Jacqueline); E.J.G. Sijbrands (Eric)

2011-01-01

textabstractAims/hypothesis: An APOC3 promoter haplotype has been previously associated with type 1 diabetes. In this population-based study, we investigated whether APOC3 polymorphisms increase type 2 diabetes risk and need for insulin treatment in lean participants. Methods: In the Rotterdam

Implementation of Lean Manufacturing in Romanian Organisations

Directory of Open Access Journals (Sweden)

Ucenic Camelia Ioana

2017-01-01

Full Text Available The implementation of lean manufacturing is one of the main tools for attaining a higher performance level in the Romanian organisations. The study uses data collected at middle management level from organisations located in Transylvania. The organisations come from different fields of activity and are in different stages of lean implementation. The article makes use of quantitative and qualitative instruments for the evaluation of lean in the above mentioned companies. Characteristics as waste reduction, cost, quality, product design have different approaches in the companies. Their way of approach gives useful information regarding the type of company from the point of view of lean manufacturing implementation. This knowledge provides a useful support at different managerial levels in the process of decision making.

A case study of lean, sustainable manufacturing

Directory of Open Access Journals (Sweden)

Geoff Miller

2010-06-01

Full Text Available A small furniture production company has integrated lean tools and sustainability concepts with discrete event simulation modeling and analysis as well as mathematical optimization to make a positive impact on the environment, society and its own financial success. The principles of lean manufacturing that aid in the elimination of waste have helped the company meet ever increasing customer demands while preserving valuable resources for future generations. The implementation of lean and sustainable manufacturing was aided by the use of discrete event simulation and optimization to overcome deficits in lean’s traditional implementation strategies. Lean and green manufacturing can have a more significant, positive impact on multiple measures of operational performance when implemented concurrently rather than separately. These ideas are demonstrated by three applications.

Machine learning-based methods for prediction of linear B-cell epitopes.

Science.gov (United States)

Wang, Hsin-Wei; Pai, Tun-Wen

2014-01-01

B-cell epitope prediction facilitates immunologists in designing peptide-based vaccine, diagnostic test, disease prevention, treatment, and antibody production. In comparison with T-cell epitope prediction, the performance of variable length B-cell epitope prediction is still yet to be satisfied. Fortunately, due to increasingly available verified epitope databases, bioinformaticians could adopt machine learning-based algorithms on all curated data to design an improved prediction tool for biomedical researchers. Here, we have reviewed related epitope prediction papers, especially those for linear B-cell epitope prediction. It should be noticed that a combination of selected propensity scales and statistics of epitope residues with machine learning-based tools formulated a general way for constructing linear B-cell epitope prediction systems. It is also observed from most of the comparison results that the kernel method of support vector machine (SVM) classifier outperformed other machine learning-based approaches. Hence, in this chapter, except reviewing recently published papers, we have introduced the fundamentals of B-cell epitope and SVM techniques. In addition, an example of linear B-cell prediction system based on physicochemical features and amino acid combinations is illustrated in details.

Using Simulation to Explore Lean Manufacturing Implementation Strategies

Science.gov (United States)

Shannon, Patrick W.; Krumwiede, Kip R.; Street, Jeffrey N.

2010-01-01

Lean manufacturing, an outgrowth of the Toyota Production System, has spread far beyond the automobile industry and is seen by many leaders as a key management philosophy in the battle to compete on an international scale. Successful implementation of lean requires that managers and employees be educated in the proper application of lean tools and…

Insulin-induced capillary recruitment is impaired in both lean and obese women with PCOS.

Science.gov (United States)

Ketel, I J G; Serné, E H; Ijzerman, R G; Korsen, T J M; Twisk, J W; Hompes, P G A; Smulders, Y M; Homburg, R; Vorstermans, L; Stehouwer, C D A; Lambalk, C B

2011-11-01

Insulin resistance, i.e. impaired insulin-mediated glucose uptake (IMGU), is a major risk factor for type 2 diabetes in women with polycystic ovary syndrome (PCOS). Insulin-induced capillary recruitment (IICR) is considered a significant determinant of IMGU. We investigated whether IICR is a determinant IMGU in obese and lean women with and without PCOS. The study included 36 women with PCOS (20 lean, BMI 21.9 ± 2.3 kg/m(2) and 16 obese, BMI 35.9 ± 6.0 kg/m(2)) and 27 age-matched healthy controls (14 lean, BMI 22.2 ± 1.8 kg/m(2) and 13 obese, BMI 40.5 ± 7.0 kg/m(2)). IICR was evaluated by capillary microscopy during an isoglycemic-hyperinsulinemic clamp. IMGU was expressed as M/I value. The M/I value was significantly lower in obese PCOS women compared with obese controls [0.5 (0.2-1.1) versus 0.8 (0.3-1.4) (mg kg(-1) min(-1) pmol l(-1)) × 100, P lean PCOS and lean control women was non-significant [1.5 (0.5-2.6) versus 1.7 (1.0-3.7) (mg kg(-1) min(-1) pmol l(-1)) × 100, P = 0.17]. Hyperinsulinemia increased capillary recruitment in lean controls (53.5 ± 20.3 versus 64.9 ± 27.4 n/mm(2), P PCOS group nor in obese controls. IICR and androgens were a determinant of M/I value only in lean women with or without PCOS. PCOS per se is associated with impaired IICR. Obese women with PCOS, in part independent of obesity, demonstrated a profound insulin resistance, whereas the difference between lean PCOS women and healthy controls was small and statistically non-significant. IICR was a determinant of IMGU in lean, but not in obese, women regardless of the presence of PCOS.

"The largest Lean transformation in the world": the implementation and evaluation of lean in Saskatchewan healthcare.

Science.gov (United States)

Kinsman, Leigh; Rotter, Thomas; Stevenson, Katherine; Bath, Brenna; Goodridge, Donna; Harrison, Liz; Dobson, Roy; Sari, Nazmi; Jeffery, Cathy; Bourassa, Carrie; Westhorp, Gill

2014-01-01

The Saskatchewan Ministry of Health has committed to a multi-million dollar investment toward the implementation of Lean methodology across the province's healthcare system. Originating as a production line discipline (the Toyota Production System), Lean has evolved to encompass process improvements including inventory management, waste reduction and quality improvement techniques. With an initial focus on leadership, strategic alignment, training and the creation of a supportive infrastructure (Lean promotion offices), the goal in Saskatchewan is a whole health system transformation that produces "better health, better value, better care, and better teams." Given the scope and scale of the initiative and the commitment of resources, it is vital that a comprehensive, longitudinal evaluation plan be implemented to support ongoing decision-making and program design. The nature of the initiative also offers a unique opportunity to contribute to health quality improvement science by advancing our understanding of the implementation and evaluation of complex, large-scale healthcare interventions. The purpose of this article is to summarize the background to Lean in Saskatchewan and the proposed evaluation methods. Copyright © 2014 Longwoods Publishing.

Principles of lean planning and control

NARCIS (Netherlands)

Riezebos, J.

2015-01-01

Lean production systems use teams instead of functional departments as well as simple shop floor control methods to manage the flow of orders at the shop floor. Lean shop floor control focuses on robust and visual methods that are able to cope with variation in processing times, routing sequences,

Developing weighted criteria to evaluate lean reverse logistics through analytical network process

Science.gov (United States)

Zagloel, Teuku Yuri M.; Hakim, Inaki Maulida; Krisnawardhani, Rike Adyartie

2017-11-01

Reverse logistics is a part of supply chain that bring materials from consumers back to manufacturer in order to gain added value or do a proper disposal. Nowadays, most companies are still facing several problems on reverse logistics implementation which leads to high waste along reverse logistics processes. In order to overcome this problem, Madsen [Framework for Reverse Lean Logistics to Enable Green Manufacturing, Eco Design 2009: 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Sapporo, 2009] has developed a lean reverse logistics framework as a step to eliminate waste by implementing lean on reverse logistics. However, the resulted framework sets aside criteria used to evaluate its performance. This research aims to determine weighted criteria that can be used as a base on reverse logistics evaluation by considering lean principles. The resulted criteria will ensure reverse logistics are kept off from waste, thus implemented efficiently. Analytical Network Process (ANP) is used in this research to determine the weighted criteria. The result shows that criteria used for evaluation lean reverse logistics are Innovation and Learning (35%), Economic (30%), Process Flow Management (14%), Customer Relationship Management (13%), Environment (6%), and Social (2%).

Performance of machine learning methods for ligand-based virtual screening.

Science.gov (United States)

Plewczynski, Dariusz; Spieser, Stéphane A H; Koch, Uwe

2009-05-01

Computational screening of compound databases has become increasingly popular in pharmaceutical research. This review focuses on the evaluation of ligand-based virtual screening using active compounds as templates in the context of drug discovery. Ligand-based screening techniques are based on comparative molecular similarity analysis of compounds with known and unknown activity. We provide an overview of publications that have evaluated different machine learning methods, such as support vector machines, decision trees, ensemble methods such as boosting, bagging and random forests, clustering methods, neuronal networks, naïve Bayesian, data fusion methods and others.

Lean oncology: a new model for oncologists

Directory of Open Access Journals (Sweden)

Montesarchio Vincenzo

2012-04-01

Full Text Available Abstract The history of the term Lean is relatively recent and originates from the Toyota Production System (TPS. The term "Lean" means "thin", which refers to a mental process, operational, productive, no-frills, quick but not hasty, consequential to the previous event. The Lean process flows seamlessly into the result, eliminates unnecessary complications to the effect, prevents unnecessary equipment processes. The idea is to 'do more with less', like using the (few available resources in the most productive way possible, through the elimination of all types of waste that inevitably accompanies every stage of a production process. Lean management is primarily a management philosophy, a system of values and behaviors that goes beyond the mere application of the instrument and that, once internalized, will form the nucleus of the corporate culture. "Lean Oncology" is a term coined to identify a methodology of care and treatment to cancer patients, consisting on process simplification, streamlining of the organizational and routes of drug treatment, detection and elimination of waste. Its main objective is the centrality of the patient.

Lean oncology: a new model for oncologists.

Science.gov (United States)

Montesarchio, Vincenzo; Grimaldi, Antonio Maria; Fox, Bernard A; Rea, Antonio; Marincola, Francesco M; Ascierto, Paolo A

2012-04-25

The history of the term Lean is relatively recent and originates from the Toyota Production System (TPS). The term "Lean" means "thin", which refers to a mental process, operational, productive, no-frills, quick but not hasty, consequential to the previous event. The Lean process flows seamlessly into the result, eliminates unnecessary complications to the effect, prevents unnecessary equipment processes. The idea is to 'do more with less', like using the (few) available resources in the most productive way possible, through the elimination of all types of waste that inevitably accompanies every stage of a production process. Lean management is primarily a management philosophy, a system of values and behaviors that goes beyond the mere application of the instrument and that, once internalized, will form the nucleus of the corporate culture. "Lean Oncology" is a term coined to identify a methodology of care and treatment to cancer patients, consisting on process simplification, streamlining of the organizational and routes of drug treatment, detection and elimination of waste. Its main objective is the centrality of the patient.

Lean IT partnering : How partners create value by developing a lean culture for IT supply and management

NARCIS (Netherlands)

Zee, van der J.T.M.; Blijleven, V.B; Gong, Y.

2015-01-01

Lean, as a philosophy, has been around for quite some time, predominantly in the manufacturing domain. Since the 1990s Lean management provides organizations with a way to achieve superior performance by focusing on customer value, innovation and productivity. In 2011 Steven Bell and Michael Orzen

Implementation of lean thinking: one health system's journey.

Science.gov (United States)

Kim, Christopher S; Spahlinger, David A; Kin, Jeanne M; Coffey, Richard J; Billi, John E

2009-08-01

Lean Thinking is a management philosophy derived from the manufacturing industry, where Toyota has long been the gold standard. Health care organizations have started to apply this approach to patient care. After initial experimentation, the University of Michigan Health System (UMHS) has adopted Lean Thinking as its uniform approach to quality improvement and is striving to become a complete Lean organization. In 2005, the senior leadership selected an initial set of projects in areas that traced the patient's journey across different care settings within our health system. Four of the projects were as follows: orthopedic surgery clinic scheduling, radiation oncology therapy, peripherally inserted central catheter (PICC) services, and coordination of care to the outpatient setting. Lean Thinking encourages service providers to focus on value as defined by the customer and the relentless elimination of waste that impedes the flow of value. A series of learning projects were conducted to test whether Lean methods would work at UMHS. The following factors were found to be key to LEAN PROJECT SUCCESS: expert guidance for initial efforts, leadership in the form of clinical champions and senior management support of the improvement work, frontline worker engagement in mapping out "current state" processes, identifying waste and designing an improved "future state," using metrics to develop and track interventions, and defining realistic project scope. As UMHS's experience applying Lean Thinking to our patient care processes has grown, so have support, enthusiasm, and expertise within the organization. UMHS's Lean Thinking system, now known as the Michigan Quality System, has emerged as the core improvement strategy.

Lean Transformation of Multinational Concerns

DEFF Research Database (Denmark)

Matthiesen, Rikke Vestergaard; Johansen, John

2008-01-01

triggered. This paper reports on exploratory studies from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI). Competitive pressure demands...... from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI)....

Lean healthcare from a change management perspective.

Science.gov (United States)

van Rossum, Lisa; Aij, Kjeld Harald; Simons, Frederique Elisabeth; van der Eng, Niels; Ten Have, Wouter Dirk

2016-05-16

Purpose - Lean healthcare is used in a growing number of hospitals to increase efficiency and quality of care. However, healthcare organizations encounter problems with the implementation of change initiatives due to an implementation gap: the gap between strategy and execution. From a change management perspective, the purpose of this paper is to increase scientific knowledge regarding factors that diminish the implementation gap and make the transition from the "toolbox lean" toward an actual transformation to lean healthcare. Design/methodology/approach - A cross-sectional study was executed in an operating theatre of a Dutch University Medical Centre. Transformational leadership was expected to ensure the required top-down commitment, whereas team leadership creates the required active, bottom-up behavior of employees. Furthermore, professional and functional silos and a hierarchical structure were expected to impede the workforce flexibility in adapting organizational elements and optimize the entire process flow. Findings - The correlation and regression analyses showed positive relations between the transformational leadership and team leadership styles and lean healthcare implementation. The results also indicated a strong relation between workforce flexibility and the implementation of lean healthcare. Originality/value - With the use of a recently developed change management model, the Change Competence Model, the authors suggest leadership and workforce flexibility to be part of an organization's change capacity as crucial success factor for a sustainable transformation to lean healthcare.

Prediction of drug synergy in cancer using ensemble-based machine learning techniques

Science.gov (United States)

Singh, Harpreet; Rana, Prashant Singh; Singh, Urvinder

2018-04-01

Drug synergy prediction plays a significant role in the medical field for inhibiting specific cancer agents. It can be developed as a pre-processing tool for therapeutic successes. Examination of different drug-drug interaction can be done by drug synergy score. It needs efficient regression-based machine learning approaches to minimize the prediction errors. Numerous machine learning techniques such as neural networks, support vector machines, random forests, LASSO, Elastic Nets, etc., have been used in the past to realize requirement as mentioned above. However, these techniques individually do not provide significant accuracy in drug synergy score. Therefore, the primary objective of this paper is to design a neuro-fuzzy-based ensembling approach. To achieve this, nine well-known machine learning techniques have been implemented by considering the drug synergy data. Based on the accuracy of each model, four techniques with high accuracy are selected to develop ensemble-based machine learning model. These models are Random forest, Fuzzy Rules Using Genetic Cooperative-Competitive Learning method (GFS.GCCL), Adaptive-Network-Based Fuzzy Inference System (ANFIS) and Dynamic Evolving Neural-Fuzzy Inference System method (DENFIS). Ensembling is achieved by evaluating the biased weighted aggregation (i.e. adding more weights to the model with a higher prediction score) of predicted data by selected models. The proposed and existing machine learning techniques have been evaluated on drug synergy score data. The comparative analysis reveals that the proposed method outperforms others in terms of accuracy, root mean square error and coefficient of correlation.

Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy

International Nuclear Information System (INIS)

Khidhir, Basim A.; Mohamed, Bashir

2010-01-01

Nickel- based alloy is difficult-to-machine because of its low thermal diffusive property and high strength at higher temperature. The machinability of nickel- based Hastelloy C-276 in turning operations has been carried out using different types of inserts under dry conditions on a computer numerical control (CNC) turning machine at different stages of cutting speed. The effects of cutting speed on surface roughness have been investigated. This study explores the types of wear caused by the effect of cutting speed on coated and uncoated carbide inserts. In addition, the effect of burr formation is investigated. The chip burr is found to have different shapes at lower speeds. Triangles and squares have been noticed for both coated and uncoated tips as well. The conclusion from this study is that the transition from thick continuous chip to wider discontinuous chip is caused by different types of inserts. The chip burr has a significant effect on tool damage starting in the line of depth-of-cut. For the coated insert tips, the burr disappears when the speed increases to above 150 m/min with the improvement of surface roughness; increasing the speed above the same limit for uncoated insert tips increases the chip burr size. The results of this study showed that the surface finish of nickel-based alloy is highly affected by the insert type with respect to cutting speed changes and its effect on chip burr formation and tool failure

CRITICAL SUCCESS FACTORS FOR IMPLEMENTING LEAN PRACTICES IN IT SUPPORT SERVICES

Directory of Open Access Journals (Sweden)

Goutam Kundu

2012-12-01

Full Text Available Many studies have been done to identify the critical success factors (CSFs in for successful lean implementation in the manufacturing firms. But, till date, no systematic study has been done to identify the CSFs from the perspective of lean implementation in IT support service sector. This paper aims to address this area. A detailed literature review was undertaken to identify CSFs for lean implementation in manufacturing and services context and to consider their applicability to the IT support services sector. This paper is based on a conceptual discussion of CSFs as applied to the IT support services sector. The authors proposed a set of CSFs which is believed to be suitable for IT support service enterpri ses. The relevance of CSFs will need to be tested and qualitative research is needed to inform further work. The proposed CSFs are aimed at being useful to IT support services sector as a guideline, so as to ensure a positive outcome of the lean implementation process in IT support services sector.

Lean Manufacturing e Lean Accounting Cost: um enfoque no real desempenho em empresas de capital aberto na BOVESPA

OpenAIRE

Teixeira, Hipólito Francisco

2016-01-01

Esta pesquisa teve por alvo o campo de estudo denominado Lean Accounting (LA) aplicado as empresas que adotam os procedimentos de Produção Enxuta (PE). As empresas neste ambiente competitivo e muito imprevisivel têm procuradoadotar decisões e procedimentos voltadosa valorizar sua própria continuidade e diferencial para se expor perante ao mercado. Neste sentido novas tecnologias de produção e controles contábeis são necessários. Lean Accounting (LA) ou Contabilidade Lean ou “enxuta” pode s...

The urine metabolome differs between lean and overweight Labrador Retriever dogs during a feed-challenge.

Directory of Open Access Journals (Sweden)

Josefin Söder

Full Text Available Obesity in dogs is an increasing problem and better knowledge of the metabolism of overweight dogs is needed. Identification of molecular changes related to overweight may lead to new methods to improve obesity prevention and treatment. The aim of the study was firstly to investigate whether Nuclear Magnetic Resonance (NMR based metabolomics could be used to differentiate postprandial from fasting urine in dogs, and secondly to investigate whether metabolite profiles differ between lean and overweight dogs in fasting and postprandial urine, respectively. Twenty-eight healthy intact male Labrador Retrievers were included, 12 of which were classified as lean (body condition score (BCS 4-5 on a 9-point scale and 16 as overweight (BCS 6-8. After overnight fasting, a voided morning urine sample was collected. Dogs were then fed a high-fat mixed meal and postprandial urine was collected after 3 hours. Metabolic profiles were generated using NMR and 45 metabolites identified from the spectral data were evaluated using multivariate data analysis. The results revealed that fasting and postprandial urine differed in relative metabolite concentration (partial least-squares discriminant analysis (PLS-DA 1 comp: R2Y = 0.4, Q2Y = 0.32; cross-validated ANOVA: P = 0.00006. Univariate analyses of discriminant metabolites showed that taurine and citrate concentrations were elevated in postprandial urine, while allantoin concentration had decreased. Interestingly, lean and overweight dogs differed in terms of relative metabolite concentrations in postprandial urine (PLS-DA 1 comp: R2Y = 0.5, Q2Y = 0.36, cross-validated ANOVA: P = 0.005 but not in fasting urine. Overweight dogs had lower postprandial taurine and a trend of higher allantoin concentrations compared with lean dogs. These findings demonstrate that metabolomics can differentiate 3-hour postprandial urine from fasting urine in dogs, and that postprandial urine metabolites may be more useful than fasting

Lean Construction Supply Chain : A Literature Review

OpenAIRE

Ren, Jiamei

2012-01-01

The aim of this thesis is to enhance the management of supply systems in construction industry using lean principles. This study is an attempt to identify what kind of activities causes’ construction process delay and how to perform lean concept into supply chain in practice. The objective is to assure on-time delivery of information and materials to construction sites at lowest cost and maximum value for the customer. These study problems have been analysed from a lean construction supply ch...

Optimization of large scale food production using Lean Manufacturing principles

DEFF Research Database (Denmark)

Engelund, Eva Høy; Friis, Alan; Breum, Gitte

2009-01-01

This paper discusses how the production principles of Lean Manufacturing (Lean) can be applied in a large-scale meal production. Lean principles are briefly presented, followed by a field study of how a kitchen at a Danish hospital has implemented Lean in the daily production. In the kitchen...... not be negatively affected by the rationalisation of production procedures. The field study shows that Lean principles can be applied in meal production and can result in increased production efficiency and systematic improvement of product quality without negative effects on the working environment. The results...... show that Lean can be applied and used to manage the production of meals in the kitchen....

Constructing a unique two-phase compressibility factor model for lean gas condensates

Energy Technology Data Exchange (ETDEWEB)

Moayyedi, Mahmood; Gharesheikhlou, Aliashghar [Research Institute of Petroleum Industry (RIPI), Tehran (Iran, Islamic Republic of); Azamifard, Arash; Mosaferi, Emadoddin [Amirkabir University of Technology (AUT), Tehran (Iran, Islamic Republic of)

2015-02-15

Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models.

Constructing a unique two-phase compressibility factor model for lean gas condensates

International Nuclear Information System (INIS)

Moayyedi, Mahmood; Gharesheikhlou, Aliashghar; Azamifard, Arash; Mosaferi, Emadoddin

2015-01-01

Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models

Lean muscle mass in classic or ovulatory PCOS: association with central obesity and insulin resistance.

Science.gov (United States)

Mario, F M; do Amarante, F; Toscani, M K; Spritzer, P M

2012-10-01

This age-matched case-control study assessed total and segmental lean muscle mass in classic or ovulatory polycystic ovary syndrome (PCOS) patients and investigated whether lean mass is associated with hormone and metabolic features. Participants underwent anthropometric and clinical evaluation. Habitual physical activity was assessed with a digital pedometer, and body composition by dual-energy X-ray absorptiometry. Laboratory measurements included total cholesterol, cholesterol fractions, triglycerides, glucose, total serum testosterone, serum insulin, estradiol, luteinizing hormone, and SHBG. Energy intake was calculated using a food frequency questionnaire. Classic PCOS patients had higher body mass index (BMI), waist circumference, testosterone and lipid accumulation product values than ovulatory PCOS and controls. Energy consumption, homeostasis model assessment index, SHBG, free androgen index and triglycerides, total and trunk lean mass were higher only in classic PCOS women vs. controls. Arm, leg, trunk, total or limb lean masses were not correlated with hormone levels in any of the groups. However, in PCOS women lipid accumulation product was positively correlated with total (r=0.56, p=0.001), trunk (r=0.59, p=0.001), arm (r=0.54, p=0.001), leg (r=0.44, p=0.03) and limb (r=0.48, p=0.001) lean masses. BMI was positively correlated with all lean mass segments and independently associated with total lean mass. Lipid accumulation product and BMI were independently associated with trunk lean mass variation. The increase in lean mass in classic PCOS appears to be associated with insulin resistance and central obesity rather than with energy intake, physical activity or androgens. © J. A. Barth Verlag in Georg Thieme Verlag KG Stuttgart · New York.

Rotary Ultrasonic Machining of Poly-Crystalline Cubic Boron Nitride

Directory of Open Access Journals (Sweden)

Kuruc Marcel

2014-12-01

Full Text Available Poly-crystalline cubic boron nitride (PCBN is one of the hardest material. Generally, so hard materials could not be machined by conventional machining methods. Therefore, for this purpose, advanced machining methods have been designed. Rotary ultrasonic machining (RUM is included among them. RUM is based on abrasive removing mechanism of ultrasonic vibrating diamond particles, which are bonded on active part of rotating tool. It is suitable especially for machining hard and brittle materials (such as glass and ceramics. This contribution investigates this advanced machining method during machining of PCBN.

Mechanical Deformation Behavior of Lean Duplex 329LA Steel

Energy Technology Data Exchange (ETDEWEB)

Yoon, Byung-Jun [Research Institute of Industrial Science and Technology, Pohang (Korea, Republic of); Choi, Jeom-Yong [POSCO Technical Research Lab., Pohang (Korea, Republic of); Park, Kyung-Tae [Hanvat National University, Daejeon (Korea, Republic of); Lee, Ho Seong [Kyungpook National University, Daegu (Korea, Republic of)

2015-09-15

The tensile response of Lean Duplex 329LA stainless steel was investigated over various strain rates. It was observed that the mechanical response, including in particular the total elongation of the tested alloy, was strongly affected by the strain rate. As the strain rate decreased from 10-1 s-1 to 10-4 s-1, the elongation increased. As the strain rate increased, the deformation mode in an austenite phase was dominated by dislocation glide, resulting in deterioration of the elongation. The substructure of the ferritic phase showed a dislocation cell structure, independent of the applied strain rate. The optimum mechanical properties of lean duplex stainless steel thus can be obtained by controlling the deformation mode in the austenitic phase.

Mechanical Deformation Behavior of Lean Duplex 329LA Steel

International Nuclear Information System (INIS)

Yoon, Byung-Jun; Choi, Jeom-Yong; Park, Kyung-Tae; Lee, Ho Seong

2015-01-01

The tensile response of Lean Duplex 329LA stainless steel was investigated over various strain rates. It was observed that the mechanical response, including in particular the total elongation of the tested alloy, was strongly affected by the strain rate. As the strain rate decreased from 10-1 s-1 to 10-4 s-1, the elongation increased. As the strain rate increased, the deformation mode in an austenite phase was dominated by dislocation glide, resulting in deterioration of the elongation. The substructure of the ferritic phase showed a dislocation cell structure, independent of the applied strain rate. The optimum mechanical properties of lean duplex stainless steel thus can be obtained by controlling the deformation mode in the austenitic phase.

Operational practices of lean manufacturing: Potentiating environmental improvements

Directory of Open Access Journals (Sweden)

Marcos José Alves Pinto Junior

2017-10-01

Full Text Available Purpose: The objective of this paper is to investigate how environmental improvements can be achieved through operational practices of Lean Manufacturing. Design/methodology/approach: A literature review was conducted to analyze the relationship between operational practices of Lean and reduction of environmental impact in organizational contexts. Verified theoretically, this relationship was observed in a company of the electronics industry, through an exploratory research which contemplated a mixed approach. The adopted research method consisted of a single case study, by providing greater depth and detail of the study. Utilized a research protocol, validated test pilot. The instruments for data collection were semi-structured interviews, direct observation and document analysis. The information was examined qualitatively considering the technique for content analysis. Findings: As a result of the study, it was found that there is evidence for the existence of relationship between the practices of Lean, for example, Kaizen, PDCA (plan, do, check, act, Ishikawa Diagram, Poka-Yoke, Standardized Work and Value Stream Mapping, with the reduction of environmental impacts of an organization. This reduction was observed after application of these practices that resulted in the reduction of energy consumption, water and waste generation. These results were accounted for financially, contributing to a reduction of annual costs by about US$ 20,900. Originality/value: The study presents in detail, the application of operational practices of Lean Manufacturing, with an effective view to reducing the environmental impact and cost reduction. The literature review, a detailed description of the application process and financial results are important information that contributes to the scientific studies that address traditional operating practices and the search for better environmental performance.

Operational practices of lean manufacturing: Potentiating environmental improvements

Energy Technology Data Exchange (ETDEWEB)

Pinto, Marcos José Alves Junior; Mendes, Juliana Veiga

2017-07-01